diff options
Diffstat (limited to 'arch/arm/mach-exynos/mach-universal_c210.c')
| -rw-r--r-- | arch/arm/mach-exynos/mach-universal_c210.c | 53 |
1 files changed, 50 insertions, 3 deletions
diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c index 6bb9dbdd73fd..6b731b863275 100644 --- a/arch/arm/mach-exynos/mach-universal_c210.c +++ b/arch/arm/mach-exynos/mach-universal_c210.c @@ -23,12 +23,15 @@ #include <linux/i2c-gpio.h> #include <linux/i2c/mcs.h> #include <linux/i2c/atmel_mxt_ts.h> +#include <linux/platform_data/s3c-hsotg.h> +#include <drm/exynos_drm.h> #include <asm/mach/arch.h> #include <asm/hardware/gic.h> #include <asm/mach-types.h> #include <plat/regs-serial.h> +#include <plat/clock.h> #include <plat/cpu.h> #include <plat/devs.h> #include <plat/iic.h> @@ -39,6 +42,7 @@ #include <plat/pd.h> #include <plat/regs-fb-v4.h> #include <plat/fimc-core.h> +#include <plat/s5p-time.h> #include <plat/camport.h> #include <plat/mipi_csis.h> @@ -203,6 +207,7 @@ static struct regulator_init_data lp3974_ldo2_data = { }; static struct regulator_consumer_supply lp3974_ldo3_consumer[] = { + REGULATOR_SUPPLY("vusb_a", "s3c-hsotg"), REGULATOR_SUPPLY("vdd", "exynos4-hdmi"), REGULATOR_SUPPLY("vdd_pll", "exynos4-hdmi"), REGULATOR_SUPPLY("vdd11", "s5p-mipi-csis.0"), @@ -288,6 +293,7 @@ static struct regulator_init_data lp3974_ldo7_data = { }; static struct regulator_consumer_supply lp3974_ldo8_consumer[] = { + REGULATOR_SUPPLY("vusb_d", "s3c-hsotg"), REGULATOR_SUPPLY("vdd33a_dac", "s5p-sdo"), }; @@ -484,7 +490,10 @@ static struct regulator_init_data lp3974_vichg_data = { static struct regulator_init_data lp3974_esafeout1_data = { .constraints = { .name = "SAFEOUT1", + .min_uV = 4800000, + .max_uV = 4800000, .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .always_on = 1, .state_mem = { .enabled = 1, }, @@ -746,8 +755,8 @@ static struct s3c_sdhci_platdata universal_hsmmc0_data __initdata = { .max_width = 8, .host_caps = (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED), + .host_caps2 = MMC_CAP2_BROKEN_VOLTAGE, .cd_type = S3C_SDHCI_CD_PERMANENT, - .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, }; static struct regulator_consumer_supply mmc0_supplies[] = { @@ -787,7 +796,6 @@ static struct s3c_sdhci_platdata universal_hsmmc2_data __initdata = { .ext_cd_gpio = EXYNOS4_GPX3(4), /* XEINT_28 */ .ext_cd_gpio_invert = 1, .cd_type = S3C_SDHCI_CD_GPIO, - .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, }; /* WiFi */ @@ -810,6 +818,29 @@ static struct i2c_board_info i2c1_devs[] __initdata = { /* Gyro, To be updated */ }; +#ifdef CONFIG_DRM_EXYNOS +static struct exynos_drm_fimd_pdata drm_fimd_pdata = { + .panel = { + .timing = { + .left_margin = 16, + .right_margin = 16, + .upper_margin = 2, + .lower_margin = 28, + .hsync_len = 2, + .vsync_len = 1, + .xres = 480, + .yres = 800, + .refresh = 55, + }, + }, + .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB | + VIDCON0_CLKSEL_LCD, + .vidcon1 = VIDCON1_INV_VCLK | VIDCON1_INV_VDEN + | VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, + .default_win = 3, + .bpp = 32, +}; +#else /* Frame Buffer */ static struct s3c_fb_pd_win universal_fb_win0 = { .win_mode = { @@ -837,6 +868,7 @@ static struct s3c_fb_platdata universal_lcd_pdata __initdata = { | VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, .setup_gpio = exynos4_fimd0_gpio_setup_24bpp, }; +#endif static struct regulator_consumer_supply cam_vt_dio_supply = REGULATOR_SUPPLY("vdd_core", "0-003c"); @@ -991,6 +1023,9 @@ static struct gpio universal_camera_gpios[] = { { GPIO_CAM_VGA_NSTBY, GPIOF_OUT_INIT_LOW, "CAM_VGA_NSTBY" }, }; +/* USB OTG */ +static struct s3c_hsotg_plat universal_hsotg_pdata; + static void __init universal_camera_init(void) { s3c_set_platdata(&mipi_csis_platdata, sizeof(mipi_csis_platdata), @@ -1046,6 +1081,10 @@ static struct platform_device *universal_devices[] __initdata = { &s5p_device_onenand, &s5p_device_fimd0, &s5p_device_jpeg, +#ifdef CONFIG_DRM_EXYNOS + &exynos_device_drm, +#endif + &s3c_device_usb_hsotg, &s5p_device_mfc, &s5p_device_mfc_l, &s5p_device_mfc_r, @@ -1057,9 +1096,11 @@ static struct platform_device *universal_devices[] __initdata = { static void __init universal_map_io(void) { + clk_xusbxti.rate = 24000000; exynos_init_io(NULL, 0); s3c24xx_init_clocks(24000000); s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs)); + s5p_set_timer_source(S5P_PWM2, S5P_PWM4); } static void s5p_tv_setup(void) @@ -1091,12 +1132,18 @@ static void __init universal_machine_init(void) s5p_i2c_hdmiphy_set_platdata(NULL); i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs)); +#ifdef CONFIG_DRM_EXYNOS + s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata; + exynos4_fimd0_gpio_setup_24bpp(); +#else s5p_fimd0_set_platdata(&universal_lcd_pdata); +#endif universal_touchkey_init(); i2c_register_board_info(I2C_GPIO_BUS_12, i2c_gpio12_devs, ARRAY_SIZE(i2c_gpio12_devs)); + s3c_hsotg_set_platdata(&universal_hsotg_pdata); universal_camera_init(); /* Last */ @@ -1110,7 +1157,7 @@ MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210") .map_io = universal_map_io, .handle_irq = gic_handle_irq, .init_machine = universal_machine_init, - .timer = &exynos4_timer, + .timer = &s5p_timer, .reserve = &universal_reserve, .restart = exynos4_restart, MACHINE_END |