aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-imx/mach-cpuimx51sd.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-imx/mach-cpuimx51sd.c')
-rw-r--r--arch/arm/mach-imx/mach-cpuimx51sd.c364
1 files changed, 0 insertions, 364 deletions
diff --git a/arch/arm/mach-imx/mach-cpuimx51sd.c b/arch/arm/mach-imx/mach-cpuimx51sd.c
deleted file mode 100644
index 1fba2b8e983f..000000000000
--- a/arch/arm/mach-imx/mach-cpuimx51sd.c
+++ /dev/null
@@ -1,364 +0,0 @@
-/*
- *
- * Copyright (C) 2010 Eric Bénard <eric@eukrea.com>
- *
- * based on board-mx51_babbage.c which is
- * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/i2c/tsc2007.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <linux/i2c-gpio.h>
-#include <linux/spi/spi.h>
-#include <linux/can/platform/mcp251x.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "common.h"
-#include "devices-imx51.h"
-#include "eukrea-baseboards.h"
-#include "hardware.h"
-#include "iomux-mx51.h"
-
-#define USBH1_RST IMX_GPIO_NR(2, 28)
-#define ETH_RST IMX_GPIO_NR(2, 31)
-#define TSC2007_IRQGPIO_REV2 IMX_GPIO_NR(3, 12)
-#define TSC2007_IRQGPIO_REV3 IMX_GPIO_NR(4, 0)
-#define CAN_IRQGPIO IMX_GPIO_NR(1, 1)
-#define CAN_RST IMX_GPIO_NR(4, 15)
-#define CAN_NCS IMX_GPIO_NR(4, 24)
-#define CAN_RXOBF_REV2 IMX_GPIO_NR(1, 4)
-#define CAN_RXOBF_REV3 IMX_GPIO_NR(3, 12)
-#define CAN_RX1BF IMX_GPIO_NR(1, 6)
-#define CAN_TXORTS IMX_GPIO_NR(1, 7)
-#define CAN_TX1RTS IMX_GPIO_NR(1, 8)
-#define CAN_TX2RTS IMX_GPIO_NR(1, 9)
-#define I2C_SCL IMX_GPIO_NR(4, 16)
-#define I2C_SDA IMX_GPIO_NR(4, 17)
-
-/* USB_CTRL_1 */
-#define MX51_USB_CTRL_1_OFFSET 0x10
-#define MX51_USB_CTRL_UH1_EXT_CLK_EN (1 << 25)
-
-#define MX51_USB_PLLDIV_12_MHZ 0x00
-#define MX51_USB_PLL_DIV_19_2_MHZ 0x01
-#define MX51_USB_PLL_DIV_24_MHZ 0x02
-
-static iomux_v3_cfg_t eukrea_cpuimx51sd_pads[] = {
- /* UART1 */
- MX51_PAD_UART1_RXD__UART1_RXD,
- MX51_PAD_UART1_TXD__UART1_TXD,
- MX51_PAD_UART1_RTS__UART1_RTS,
- MX51_PAD_UART1_CTS__UART1_CTS,
-
- /* USB HOST1 */
- MX51_PAD_USBH1_CLK__USBH1_CLK,
- MX51_PAD_USBH1_DIR__USBH1_DIR,
- MX51_PAD_USBH1_NXT__USBH1_NXT,
- MX51_PAD_USBH1_DATA0__USBH1_DATA0,
- MX51_PAD_USBH1_DATA1__USBH1_DATA1,
- MX51_PAD_USBH1_DATA2__USBH1_DATA2,
- MX51_PAD_USBH1_DATA3__USBH1_DATA3,
- MX51_PAD_USBH1_DATA4__USBH1_DATA4,
- MX51_PAD_USBH1_DATA5__USBH1_DATA5,
- MX51_PAD_USBH1_DATA6__USBH1_DATA6,
- MX51_PAD_USBH1_DATA7__USBH1_DATA7,
- MX51_PAD_USBH1_STP__USBH1_STP,
- MX51_PAD_EIM_CS3__GPIO2_28, /* PHY nRESET */
-
- /* FEC */
- MX51_PAD_EIM_DTACK__GPIO2_31, /* PHY nRESET */
-
- /* HSI2C */
- MX51_PAD_I2C1_CLK__GPIO4_16,
- MX51_PAD_I2C1_DAT__GPIO4_17,
-
- /* I2C1 */
- MX51_PAD_SD2_CMD__I2C1_SCL,
- MX51_PAD_SD2_CLK__I2C1_SDA,
-
- /* CAN */
- MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI,
- MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
- MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
- MX51_PAD_CSPI1_SS0__GPIO4_24, /* nCS */
- MX51_PAD_CSI2_PIXCLK__GPIO4_15, /* nReset */
- MX51_PAD_GPIO1_1__GPIO1_1, /* IRQ */
- MX51_PAD_GPIO1_4__GPIO1_4, /* Control signals */
- MX51_PAD_GPIO1_6__GPIO1_6,
- MX51_PAD_GPIO1_7__GPIO1_7,
- MX51_PAD_GPIO1_8__GPIO1_8,
- MX51_PAD_GPIO1_9__GPIO1_9,
-
- /* Touchscreen */
- /* IRQ */
- NEW_PAD_CTRL(MX51_PAD_GPIO_NAND__GPIO_NAND, PAD_CTL_PUS_22K_UP |
- PAD_CTL_PKE | PAD_CTL_SRE_FAST |
- PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
- NEW_PAD_CTRL(MX51_PAD_NANDF_D8__GPIO4_0, PAD_CTL_PUS_22K_UP |
- PAD_CTL_PKE | PAD_CTL_SRE_FAST |
- PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static int tsc2007_get_pendown_state(struct device *dev)
-{
- if (mx51_revision() < IMX_CHIP_REVISION_3_0)
- return !gpio_get_value(TSC2007_IRQGPIO_REV2);
- else
- return !gpio_get_value(TSC2007_IRQGPIO_REV3);
-}
-
-static struct tsc2007_platform_data tsc2007_info = {
- .model = 2007,
- .x_plate_ohms = 180,
- .get_pendown_state = tsc2007_get_pendown_state,
-};
-
-static struct i2c_board_info eukrea_cpuimx51sd_i2c_devices[] = {
- {
- I2C_BOARD_INFO("pcf8563", 0x51),
- }, {
- I2C_BOARD_INFO("tsc2007", 0x49),
- .platform_data = &tsc2007_info,
- },
-};
-
-static const struct mxc_nand_platform_data
- eukrea_cpuimx51sd_nand_board_info __initconst = {
- .width = 1,
- .hw_ecc = 1,
- .flash_bbt = 1,
-};
-
-/* This function is board specific as the bit mask for the plldiv will also
-be different for other Freescale SoCs, thus a common bitmask is not
-possible and cannot get place in /plat-mxc/ehci.c.*/
-static int initialize_otg_port(struct platform_device *pdev)
-{
- u32 v;
- void __iomem *usb_base;
- void __iomem *usbother_base;
-
- usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
- if (!usb_base)
- return -ENOMEM;
- usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
-
- /* Set the PHY clock to 19.2MHz */
- v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
- v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK;
- v |= MX51_USB_PLL_DIV_19_2_MHZ;
- __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
- iounmap(usb_base);
-
- mdelay(10);
-
- return mx51_initialize_usb_hw(0, MXC_EHCI_INTERNAL_PHY);
-}
-
-static int initialize_usbh1_port(struct platform_device *pdev)
-{
- u32 v;
- void __iomem *usb_base;
- void __iomem *usbother_base;
-
- usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
- if (!usb_base)
- return -ENOMEM;
- usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
-
- /* The clock for the USBH1 ULPI port will come from the PHY. */
- v = __raw_readl(usbother_base + MX51_USB_CTRL_1_OFFSET);
- __raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN,
- usbother_base + MX51_USB_CTRL_1_OFFSET);
- iounmap(usb_base);
-
- mdelay(10);
-
- return mx51_initialize_usb_hw(1, MXC_EHCI_POWER_PINS_ENABLED |
- MXC_EHCI_ITC_NO_THRESHOLD);
-}
-
-static const struct mxc_usbh_platform_data dr_utmi_config __initconst = {
- .init = initialize_otg_port,
- .portsc = MXC_EHCI_UTMI_16BIT,
-};
-
-static const struct fsl_usb2_platform_data usb_pdata __initconst = {
- .operating_mode = FSL_USB2_DR_DEVICE,
- .phy_mode = FSL_USB2_PHY_UTMI_WIDE,
-};
-
-static const struct mxc_usbh_platform_data usbh1_config __initconst = {
- .init = initialize_usbh1_port,
- .portsc = MXC_EHCI_MODE_ULPI,
-};
-
-static bool otg_mode_host __initdata;
-
-static int __init eukrea_cpuimx51sd_otg_mode(char *options)
-{
- if (!strcmp(options, "host"))
- otg_mode_host = true;
- else if (!strcmp(options, "device"))
- otg_mode_host = false;
- else
- pr_info("otg_mode neither \"host\" nor \"device\". "
- "Defaulting to device\n");
- return 1;
-}
-__setup("otg_mode=", eukrea_cpuimx51sd_otg_mode);
-
-static struct i2c_gpio_platform_data pdata = {
- .sda_pin = I2C_SDA,
- .sda_is_open_drain = 0,
- .scl_pin = I2C_SCL,
- .scl_is_open_drain = 0,
- .udelay = 2,
-};
-
-static struct platform_device hsi2c_gpio_device = {
- .name = "i2c-gpio",
- .id = 0,
- .dev.platform_data = &pdata,
-};
-
-static struct mcp251x_platform_data mcp251x_info = {
- .oscillator_frequency = 24E6,
-};
-
-static struct spi_board_info cpuimx51sd_spi_device[] = {
- {
- .modalias = "mcp2515",
- .max_speed_hz = 10000000,
- .bus_num = 0,
- .mode = SPI_MODE_0,
- .chip_select = 0,
- .platform_data = &mcp251x_info,
- /* irq number is run-time assigned */
- },
-};
-
-static int cpuimx51sd_spi1_cs[] = {
- CAN_NCS,
-};
-
-static const struct spi_imx_master cpuimx51sd_ecspi1_pdata __initconst = {
- .chipselect = cpuimx51sd_spi1_cs,
- .num_chipselect = ARRAY_SIZE(cpuimx51sd_spi1_cs),
-};
-
-static struct platform_device *rev2_platform_devices[] __initdata = {
- &hsi2c_gpio_device,
-};
-
-static const struct imxi2c_platform_data cpuimx51sd_i2c_data __initconst = {
- .bitrate = 100000,
-};
-
-static void __init eukrea_cpuimx51sd_init(void)
-{
- imx51_soc_init();
-
- mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51sd_pads,
- ARRAY_SIZE(eukrea_cpuimx51sd_pads));
-
- imx51_add_imx_uart(0, &uart_pdata);
- imx51_add_mxc_nand(&eukrea_cpuimx51sd_nand_board_info);
- imx51_add_imx2_wdt(0);
-
- gpio_request(ETH_RST, "eth_rst");
- gpio_set_value(ETH_RST, 1);
- imx51_add_fec(NULL);
-
- gpio_request(CAN_IRQGPIO, "can_irq");
- gpio_direction_input(CAN_IRQGPIO);
- gpio_free(CAN_IRQGPIO);
- gpio_request(CAN_NCS, "can_ncs");
- gpio_direction_output(CAN_NCS, 1);
- gpio_free(CAN_NCS);
- gpio_request(CAN_RST, "can_rst");
- gpio_direction_output(CAN_RST, 0);
- msleep(20);
- gpio_set_value(CAN_RST, 1);
- imx51_add_ecspi(0, &cpuimx51sd_ecspi1_pdata);
- cpuimx51sd_spi_device[0].irq = gpio_to_irq(CAN_IRQGPIO);
- spi_register_board_info(cpuimx51sd_spi_device,
- ARRAY_SIZE(cpuimx51sd_spi_device));
-
- if (mx51_revision() < IMX_CHIP_REVISION_3_0) {
- eukrea_cpuimx51sd_i2c_devices[1].irq =
- gpio_to_irq(TSC2007_IRQGPIO_REV2),
- platform_add_devices(rev2_platform_devices,
- ARRAY_SIZE(rev2_platform_devices));
- gpio_request(TSC2007_IRQGPIO_REV2, "tsc2007_irq");
- gpio_direction_input(TSC2007_IRQGPIO_REV2);
- gpio_free(TSC2007_IRQGPIO_REV2);
- } else {
- eukrea_cpuimx51sd_i2c_devices[1].irq =
- gpio_to_irq(TSC2007_IRQGPIO_REV3),
- imx51_add_imx_i2c(0, &cpuimx51sd_i2c_data);
- gpio_request(TSC2007_IRQGPIO_REV3, "tsc2007_irq");
- gpio_direction_input(TSC2007_IRQGPIO_REV3);
- gpio_free(TSC2007_IRQGPIO_REV3);
- }
-
- i2c_register_board_info(0, eukrea_cpuimx51sd_i2c_devices,
- ARRAY_SIZE(eukrea_cpuimx51sd_i2c_devices));
-
- if (otg_mode_host)
- imx51_add_mxc_ehci_otg(&dr_utmi_config);
- else {
- initialize_otg_port(NULL);
- imx51_add_fsl_usb2_udc(&usb_pdata);
- }
-
- gpio_request(USBH1_RST, "usb_rst");
- gpio_direction_output(USBH1_RST, 0);
- msleep(20);
- gpio_set_value(USBH1_RST, 1);
- imx51_add_mxc_ehci_hs(1, &usbh1_config);
-
-#ifdef CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD
- eukrea_mbimxsd51_baseboard_init();
-#endif
-}
-
-static void __init eukrea_cpuimx51sd_timer_init(void)
-{
- mx51_clocks_init(32768, 24000000, 22579200, 0);
-}
-
-MACHINE_START(EUKREA_CPUIMX51SD, "Eukrea CPUIMX51SD")
- /* Maintainer: Eric Bénard <eric@eukrea.com> */
- .atag_offset = 0x100,
- .map_io = mx51_map_io,
- .init_early = imx51_init_early,
- .init_irq = mx51_init_irq,
- .handle_irq = imx51_handle_irq,
- .init_time = eukrea_cpuimx51sd_timer_init,
- .init_machine = eukrea_cpuimx51sd_init,
- .init_late = imx51_init_late,
- .restart = mxc_restart,
-MACHINE_END
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.