1 files changed, 0 insertions, 54 deletions

diff --git a/arch/arm/mach-kirkwood/board-dnskw.c b/arch/arm/mach-kirkwood/board-dnskw.c
index 43d16d6714b8..a1aa87f09180 100644
--- a/arch/arm/mach-kirkwood/board-dnskw.c
+++ b/arch/arm/mach-kirkwood/board-dnskw.c
@@ -17,51 +17,11 @@
 #include <linux/mv643xx_eth.h>
 #include <linux/gpio.h>
 #include "common.h"
-#include "mpp.h"
 
 static struct mv643xx_eth_platform_data dnskw_ge00_data = {
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
 };
 
-static unsigned int dnskw_mpp_config[] __initdata = {
-	MPP13_UART1_TXD,	/* Custom ... */
-	MPP14_UART1_RXD,	/* ... Controller (DNS-320 only) */
-	MPP20_SATA1_ACTn,	/* LED: White Right HDD */
-	MPP21_SATA0_ACTn,	/* LED: White Left HDD */
-	MPP24_GPIO,
-	MPP25_GPIO,
-	MPP26_GPIO,	/* LED: Power */
-	MPP27_GPIO,	/* LED: Red Right HDD */
-	MPP28_GPIO,	/* LED: Red Left HDD */
-	MPP29_GPIO,	/* LED: Red USB (DNS-325 only) */
-	MPP30_GPIO,
-	MPP31_GPIO,
-	MPP32_GPIO,
-	MPP33_GPO,
-	MPP34_GPIO,	/* Button: Front power */
-	MPP35_GPIO,	/* LED: Red USB (DNS-320 only) */
-	MPP36_GPIO,	/* Power: Turn off board */
-	MPP37_GPIO,	/* Power: Turn back on after power failure */
-	MPP38_GPIO,
-	MPP39_GPIO,	/* Power: SATA0 */
-	MPP40_GPIO,	/* Power: SATA1 */
-	MPP41_GPIO,	/* SATA0 present */
-	MPP42_GPIO,	/* SATA1 present */
-	MPP43_GPIO,	/* LED: White USB */
-	MPP44_GPIO,	/* Fan: Tachometer Pin */
-	MPP45_GPIO,	/* Fan: high speed */
-	MPP46_GPIO,	/* Fan: low speed */
-	MPP47_GPIO,	/* Button: Back unmount */
-	MPP48_GPIO,	/* Button: Back reset */
-	MPP49_GPIO,	/* Temp Alarm (DNS-325) Pin of U5 (DNS-320) */
-	0
-};
-
-static void dnskw_power_off(void)
-{
-	gpio_set_value(36, 1);
-}
-
 /* Register any GPIO for output and set the value */
 static void __init dnskw_gpio_register(unsigned gpio, char *name, int def)
 {
@@ -76,22 +36,8 @@ static void __init dnskw_gpio_register(unsigned gpio, char *name, int def)
 
 void __init dnskw_init(void)
 {
-	kirkwood_mpp_conf(dnskw_mpp_config);
-
-	kirkwood_ehci_init();
 	kirkwood_ge00_init(&dnskw_ge00_data);
 
-	/* Register power-off GPIO. */
-	if (gpio_request(36, "dnskw:power:off") == 0
-	    && gpio_direction_output(36, 0) == 0)
-		pm_power_off = dnskw_power_off;
-	else
-		pr_err("dnskw: failed to configure power-off GPIO\n");
-
-	/* Ensure power is supplied to both HDDs */
-	dnskw_gpio_register(39, "dnskw:power:sata0", 1);
-	dnskw_gpio_register(40, "dnskw:power:sata1", 1);
-
 	/* Set NAS to turn back on after a power failure */
 	dnskw_gpio_register(37, "dnskw:power:recover", 1);
 }