aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-kirkwood/openrd-setup.c
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--arch/arm/mach-kirkwood/openrd-setup.c255
1 files changed, 0 insertions, 255 deletions
diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c
deleted file mode 100644
index e5cf84103583..000000000000
--- a/arch/arm/mach-kirkwood/openrd-setup.c
+++ /dev/null
@@ -1,255 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/openrd-setup.c
- *
- * Marvell OpenRD (Base|Client|Ultimate) Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include <linux/platform_data/mmc-mvsdio.h>
-#include "common.h"
-#include "mpp.h"
-
-static struct mtd_partition openrd_nand_parts[] = {
- {
- .name = "u-boot",
- .offset = 0,
- .size = SZ_1M,
- .mask_flags = MTD_WRITEABLE
- }, {
- .name = "uImage",
- .offset = MTDPART_OFS_NXTBLK,
- .size = SZ_4M
- }, {
- .name = "root",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL
- },
-};
-
-static struct mv643xx_eth_platform_data openrd_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(8),
-};
-
-static struct mv643xx_eth_platform_data openrd_ge01_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(24),
-};
-
-static struct mv_sata_platform_data openrd_sata_data = {
- .n_ports = 2,
-};
-
-static struct mvsdio_platform_data openrd_mvsdio_data = {
- .gpio_card_detect = 29, /* MPP29 used as SD card detect */
- .gpio_write_protect = -1,
-};
-
-static unsigned int openrd_mpp_config[] __initdata = {
- MPP12_SD_CLK,
- MPP13_SD_CMD,
- MPP14_SD_D0,
- MPP15_SD_D1,
- MPP16_SD_D2,
- MPP17_SD_D3,
- MPP28_GPIO,
- MPP29_GPIO,
- MPP34_GPIO,
- 0
-};
-
-/* Configure MPP for UART1 */
-static unsigned int openrd_uart1_mpp_config[] __initdata = {
- MPP13_UART1_TXD,
- MPP14_UART1_RXD,
- 0
-};
-
-static struct i2c_board_info i2c_board_info[] __initdata = {
- {
- I2C_BOARD_INFO("cs42l51", 0x4a),
- },
-};
-
-static struct platform_device openrd_client_audio_device = {
- .name = "openrd-client-audio",
- .id = -1,
-};
-
-static int __initdata uart1;
-
-static int __init sd_uart_selection(char *str)
-{
- uart1 = -EINVAL;
-
- /* Default is SD. Change if required, for UART */
- if (!str)
- return 0;
-
- if (!strncmp(str, "232", 3)) {
- uart1 = 232;
- } else if (!strncmp(str, "485", 3)) {
- /* OpenRD-Base doesn't have RS485. Treat is as an
- * unknown argument & just have default setting -
- * which is SD */
- if (machine_is_openrd_base()) {
- uart1 = -ENODEV;
- return 1;
- }
-
- uart1 = 485;
- }
- return 1;
-}
-/* Parse boot_command_line string kw_openrd_init_uart1=232/485 */
-__setup("kw_openrd_init_uart1=", sd_uart_selection);
-
-static int __init uart1_mpp_config(void)
-{
- kirkwood_mpp_conf(openrd_uart1_mpp_config);
-
- if (gpio_request(34, "SD_UART1_SEL")) {
- pr_err("GPIO request 34 failed for SD/UART1 selection\n");
- return -EIO;
- }
-
- if (gpio_request(28, "RS232_RS485_SEL")) {
- pr_err("GPIO request 28 failed for RS232/RS485 selection\n");
- gpio_free(34);
- return -EIO;
- }
-
- /* Select UART1
- * Pin # 34: 0 => UART1, 1 => SD */
- gpio_direction_output(34, 0);
-
- /* Select RS232 OR RS485
- * Pin # 28: 0 => RS232, 1 => RS485 */
- if (uart1 == 232)
- gpio_direction_output(28, 0);
- else
- gpio_direction_output(28, 1);
-
- gpio_free(34);
- gpio_free(28);
-
- return 0;
-}
-
-static void __init openrd_init(void)
-{
- /*
- * Basic setup. Needs to be called early.
- */
- kirkwood_init();
- kirkwood_mpp_conf(openrd_mpp_config);
-
- kirkwood_uart0_init();
- kirkwood_nand_init(openrd_nand_parts, ARRAY_SIZE(openrd_nand_parts),
- 25);
-
- kirkwood_ehci_init();
-
- if (machine_is_openrd_ultimate()) {
- openrd_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
- openrd_ge01_data.phy_addr = MV643XX_ETH_PHY_ADDR(1);
- }
-
- kirkwood_ge00_init(&openrd_ge00_data);
- if (!machine_is_openrd_base())
- kirkwood_ge01_init(&openrd_ge01_data);
-
- kirkwood_sata_init(&openrd_sata_data);
-
- kirkwood_i2c_init();
-
- if (machine_is_openrd_client() || machine_is_openrd_ultimate()) {
- platform_device_register(&openrd_client_audio_device);
- i2c_register_board_info(0, i2c_board_info,
- ARRAY_SIZE(i2c_board_info));
- kirkwood_audio_init();
- }
-
- if (uart1 <= 0) {
- if (uart1 < 0)
- pr_err("Invalid kernel parameter to select UART1. Defaulting to SD. ERROR CODE: %d\n",
- uart1);
-
- /* Select SD
- * Pin # 34: 0 => UART1, 1 => SD */
- if (gpio_request(34, "SD_UART1_SEL")) {
- pr_err("GPIO request 34 failed for SD/UART1 selection\n");
- } else {
-
- gpio_direction_output(34, 1);
- gpio_free(34);
- kirkwood_sdio_init(&openrd_mvsdio_data);
- }
- } else {
- if (!uart1_mpp_config())
- kirkwood_uart1_init();
- }
-}
-
-static int __init openrd_pci_init(void)
-{
- if (machine_is_openrd_base() ||
- machine_is_openrd_client() ||
- machine_is_openrd_ultimate())
- kirkwood_pcie_init(KW_PCIE0);
-
- return 0;
-}
-subsys_initcall(openrd_pci_init);
-
-#ifdef CONFIG_MACH_OPENRD_BASE
-MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board")
- /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
- .atag_offset = 0x100,
- .init_machine = openrd_init,
- .map_io = kirkwood_map_io,
- .init_early = kirkwood_init_early,
- .init_irq = kirkwood_init_irq,
- .init_time = kirkwood_timer_init,
- .restart = kirkwood_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_OPENRD_CLIENT
-MACHINE_START(OPENRD_CLIENT, "Marvell OpenRD Client Board")
- /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
- .atag_offset = 0x100,
- .init_machine = openrd_init,
- .map_io = kirkwood_map_io,
- .init_early = kirkwood_init_early,
- .init_irq = kirkwood_init_irq,
- .init_time = kirkwood_timer_init,
- .restart = kirkwood_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_OPENRD_ULTIMATE
-MACHINE_START(OPENRD_ULTIMATE, "Marvell OpenRD Ultimate Board")
- /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
- .atag_offset = 0x100,
- .init_machine = openrd_init,
- .map_io = kirkwood_map_io,
- .init_early = kirkwood_init_early,
- .init_irq = kirkwood_init_irq,
- .init_time = kirkwood_timer_init,
- .restart = kirkwood_restart,
-MACHINE_END
-#endif
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.