aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-ks8695/board-og.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-ks8695/board-og.c')
-rw-r--r--arch/arm/mach-ks8695/board-og.c197
1 files changed, 0 insertions, 197 deletions
diff --git a/arch/arm/mach-ks8695/board-og.c b/arch/arm/mach-ks8695/board-og.c
deleted file mode 100644
index 12ffe9227f9c..000000000000
--- a/arch/arm/mach-ks8695/board-og.c
+++ /dev/null
@@ -1,197 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * board-og.c -- support for the OpenGear KS8695 based boards.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include "devices.h"
-#include <mach/regs-gpio.h>
-#include <mach/gpio-ks8695.h>
-#include "generic.h"
-
-static int og_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- if (machine_is_im4004() && (slot == 8))
- return KS8695_IRQ_EXTERN1;
- return KS8695_IRQ_EXTERN0;
-}
-
-static struct ks8695_pci_cfg __initdata og_pci = {
- .mode = KS8695_MODE_PCI,
- .map_irq = og_pci_map_irq,
-};
-
-static void __init og_register_pci(void)
-{
- /* Initialize the GPIO lines for interrupt mode */
- ks8695_gpio_interrupt(KS8695_GPIO_0, IRQ_TYPE_LEVEL_LOW);
-
- /* Cardbus Slot */
- if (machine_is_im4004())
- ks8695_gpio_interrupt(KS8695_GPIO_1, IRQ_TYPE_LEVEL_LOW);
-
- if (IS_ENABLED(CONFIG_PCI))
- ks8695_init_pci(&og_pci);
-}
-
-/*
- * The PCI bus reset is driven by a dedicated GPIO line. Toggle it here
- * and bring the PCI bus out of reset.
- */
-static void __init og_pci_bus_reset(void)
-{
- unsigned int rstline = 1;
-
- /* Some boards use a different GPIO as the PCI reset line */
- if (machine_is_im4004())
- rstline = 2;
- else if (machine_is_im42xx())
- rstline = 0;
-
- gpio_request(rstline, "PCI reset");
- gpio_direction_output(rstline, 0);
-
- /* Drive a reset on the PCI reset line */
- gpio_set_value(rstline, 1);
- gpio_set_value(rstline, 0);
- mdelay(100);
- gpio_set_value(rstline, 1);
- mdelay(100);
-}
-
-/*
- * Direct connect serial ports (non-PCI that is).
- */
-#define S8250_PHYS 0x03800000
-#define S8250_VIRT 0xf4000000
-#define S8250_SIZE 0x00100000
-
-static struct map_desc og_io_desc[] __initdata = {
- {
- .virtual = S8250_VIRT,
- .pfn = __phys_to_pfn(S8250_PHYS),
- .length = S8250_SIZE,
- .type = MT_DEVICE,
- }
-};
-
-static struct resource og_uart_resources[] = {
- {
- .start = S8250_VIRT,
- .end = S8250_VIRT + S8250_SIZE,
- .flags = IORESOURCE_MEM
- },
-};
-
-static struct plat_serial8250_port og_uart_data[] = {
- {
- .mapbase = S8250_VIRT,
- .membase = (char *) S8250_VIRT,
- .irq = 3,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
- .iotype = UPIO_MEM,
- .regshift = 2,
- .uartclk = 115200 * 16,
- },
- { },
-};
-
-static struct platform_device og_uart = {
- .name = "serial8250",
- .id = 0,
- .dev.platform_data = og_uart_data,
- .num_resources = 1,
- .resource = og_uart_resources
-};
-
-static struct platform_device *og_devices[] __initdata = {
- &og_uart
-};
-
-static void __init og_init(void)
-{
- ks8695_register_gpios();
-
- if (machine_is_cm4002()) {
- ks8695_gpio_interrupt(KS8695_GPIO_1, IRQ_TYPE_LEVEL_HIGH);
- iotable_init(og_io_desc, ARRAY_SIZE(og_io_desc));
- platform_add_devices(og_devices, ARRAY_SIZE(og_devices));
- } else {
- og_pci_bus_reset();
- og_register_pci();
- }
-
- ks8695_add_device_lan();
- ks8695_add_device_wan();
-}
-
-#ifdef CONFIG_MACH_CM4002
-MACHINE_START(CM4002, "OpenGear/CM4002")
- /* OpenGear Inc. */
- .atag_offset = 0x100,
- .map_io = ks8695_map_io,
- .init_irq = ks8695_init_irq,
- .init_machine = og_init,
- .init_time = ks8695_timer_init,
- .restart = ks8695_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_CM4008
-MACHINE_START(CM4008, "OpenGear/CM4008")
- /* OpenGear Inc. */
- .atag_offset = 0x100,
- .map_io = ks8695_map_io,
- .init_irq = ks8695_init_irq,
- .init_machine = og_init,
- .init_time = ks8695_timer_init,
- .restart = ks8695_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_CM41xx
-MACHINE_START(CM41XX, "OpenGear/CM41xx")
- /* OpenGear Inc. */
- .atag_offset = 0x100,
- .map_io = ks8695_map_io,
- .init_irq = ks8695_init_irq,
- .init_machine = og_init,
- .init_time = ks8695_timer_init,
- .restart = ks8695_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_IM4004
-MACHINE_START(IM4004, "OpenGear/IM4004")
- /* OpenGear Inc. */
- .atag_offset = 0x100,
- .map_io = ks8695_map_io,
- .init_irq = ks8695_init_irq,
- .init_machine = og_init,
- .init_time = ks8695_timer_init,
- .restart = ks8695_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_IM42xx
-MACHINE_START(IM42XX, "OpenGear/IM42xx")
- /* OpenGear Inc. */
- .atag_offset = 0x100,
- .map_io = ks8695_map_io,
- .init_irq = ks8695_init_irq,
- .init_machine = og_init,
- .init_time = ks8695_timer_init,
- .restart = ks8695_restart,
-MACHINE_END
-#endif