diff options
Diffstat (limited to 'arch/arm/mach-mvebu/board-v7.c')
| -rw-r--r-- | arch/arm/mach-mvebu/board-v7.c | 124 |
1 files changed, 58 insertions, 66 deletions
diff --git a/arch/arm/mach-mvebu/board-v7.c b/arch/arm/mach-mvebu/board-v7.c index 6478626e3ff6..89a139ed7d5b 100644 --- a/arch/arm/mach-mvebu/board-v7.c +++ b/arch/arm/mach-mvebu/board-v7.c @@ -16,10 +16,12 @@ #include <linux/init.h> #include <linux/clk-provider.h> #include <linux/of_address.h> +#include <linux/of_fdt.h> #include <linux/of_platform.h> #include <linux/io.h> #include <linux/clocksource.h> #include <linux/dma-mapping.h> +#include <linux/memblock.h> #include <linux/mbus.h> #include <linux/signal.h> #include <linux/slab.h> @@ -57,6 +59,54 @@ void __iomem *mvebu_get_scu_base(void) } /* + * When returning from suspend, the platform goes through the + * bootloader, which executes its DDR3 training code. This code has + * the unfortunate idea of using the first 10 KB of each DRAM bank to + * exercise the RAM and calculate the optimal timings. Therefore, this + * area of RAM is overwritten, and shouldn't be used by the kernel if + * suspend/resume is supported. + */ + +#ifdef CONFIG_SUSPEND +#define MVEBU_DDR_TRAINING_AREA_SZ (10 * SZ_1K) +static int __init mvebu_scan_mem(unsigned long node, const char *uname, + int depth, void *data) +{ + const char *type = of_get_flat_dt_prop(node, "device_type", NULL); + const __be32 *reg, *endp; + int l; + + if (type == NULL || strcmp(type, "memory")) + return 0; + + reg = of_get_flat_dt_prop(node, "linux,usable-memory", &l); + if (reg == NULL) + reg = of_get_flat_dt_prop(node, "reg", &l); + if (reg == NULL) + return 0; + + endp = reg + (l / sizeof(__be32)); + while ((endp - reg) >= (dt_root_addr_cells + dt_root_size_cells)) { + u64 base, size; + + base = dt_mem_next_cell(dt_root_addr_cells, ®); + size = dt_mem_next_cell(dt_root_size_cells, ®); + + memblock_reserve(base, MVEBU_DDR_TRAINING_AREA_SZ); + } + + return 0; +} + +static void __init mvebu_memblock_reserve(void) +{ + of_scan_flat_dt(mvebu_scan_mem, NULL); +} +#else +static void __init mvebu_memblock_reserve(void) {} +#endif + +/* * Early versions of Armada 375 SoC have a bug where the BootROM * leaves an external data abort pending. The kernel is hit by this * data abort as soon as it enters userspace, because it unmasks the @@ -124,76 +174,12 @@ static void __init i2c_quirk(void) return; } -#define A375_Z1_THERMAL_FIXUP_OFFSET 0xc - -static void __init thermal_quirk(void) -{ - struct device_node *np; - u32 dev, rev; - int res; - - /* - * The early SoC Z1 revision needs a quirk to be applied in order - * for the thermal controller to work properly. This quirk breaks - * the thermal support if applied on a SoC that doesn't need it, - * so we enforce the SoC revision to be known. - */ - res = mvebu_get_soc_id(&dev, &rev); - if (res < 0 || (res == 0 && rev > ARMADA_375_Z1_REV)) - return; - - for_each_compatible_node(np, NULL, "marvell,armada375-thermal") { - struct property *prop; - __be32 newval, *newprop, *oldprop; - int len; - - /* - * The register offset is at a wrong location. This quirk - * creates a new reg property as a clone of the previous - * one and corrects the offset. - */ - oldprop = (__be32 *)of_get_property(np, "reg", &len); - if (!oldprop) - continue; - - /* Create a duplicate of the 'reg' property */ - prop = kzalloc(sizeof(*prop), GFP_KERNEL); - prop->length = len; - prop->name = kstrdup("reg", GFP_KERNEL); - prop->value = kzalloc(len, GFP_KERNEL); - memcpy(prop->value, oldprop, len); - - /* Fixup the register offset of the second entry */ - oldprop += 2; - newprop = (__be32 *)prop->value + 2; - newval = cpu_to_be32(be32_to_cpu(*oldprop) - - A375_Z1_THERMAL_FIXUP_OFFSET); - *newprop = newval; - of_update_property(np, prop); - - /* - * The thermal controller needs some quirk too, so let's change - * the compatible string to reflect this and allow the driver - * the take the necessary action. - */ - prop = kzalloc(sizeof(*prop), GFP_KERNEL); - prop->name = kstrdup("compatible", GFP_KERNEL); - prop->length = sizeof("marvell,armada375-z1-thermal"); - prop->value = kstrdup("marvell,armada375-z1-thermal", - GFP_KERNEL); - of_update_property(np, prop); - } - return; -} - static void __init mvebu_dt_init(void) { - if (of_machine_is_compatible("plathome,openblocks-ax3-4")) + if (of_machine_is_compatible("marvell,armadaxp")) i2c_quirk(); - if (of_machine_is_compatible("marvell,a375-db")) { + if (of_machine_is_compatible("marvell,a375-db")) external_abort_quirk(); - thermal_quirk(); - } of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } @@ -206,10 +192,16 @@ static const char * const armada_370_xp_dt_compat[] = { DT_MACHINE_START(ARMADA_370_XP_DT, "Marvell Armada 370/XP (Device Tree)") .l2c_aux_val = 0, .l2c_aux_mask = ~0, +/* + * The following field (.smp) is still needed to ensure backward + * compatibility with old Device Trees that were not specifying the + * cpus enable-method property. + */ .smp = smp_ops(armada_xp_smp_ops), .init_machine = mvebu_dt_init, .init_irq = mvebu_init_irq, .restart = mvebu_restart, + .reserve = mvebu_memblock_reserve, .dt_compat = armada_370_xp_dt_compat, MACHINE_END |