diff options
Diffstat (limited to '')
| -rw-r--r-- | arch/arm/mach-mx3/mach-mx31moboard.c | 45 |
1 files changed, 24 insertions, 21 deletions
diff --git a/arch/arm/mach-mx3/mach-mx31moboard.c b/arch/arm/mach-mx3/mach-mx31moboard.c index 1aa8d65fccbb..3a021b01161d 100644 --- a/arch/arm/mach-mx3/mach-mx31moboard.c +++ b/arch/arm/mach-mx3/mach-mx31moboard.c @@ -214,7 +214,7 @@ static struct regulator_init_data cam_vreg_data = { .consumer_supplies = cam_consumers, }; -static struct mc13783_regulator_init_data moboard_regulators[] = { +static struct mc13xxx_regulator_init_data moboard_regulators[] = { { .id = MC13783_REG_VMMC1, .init_data = &sdhc_vreg_data, @@ -267,12 +267,14 @@ static struct mc13783_leds_platform_data moboard_leds = { .tc2_period = MC13783_LED_PERIOD_10MS, }; -static struct mc13783_platform_data moboard_pmic = { - .regulators = moboard_regulators, - .num_regulators = ARRAY_SIZE(moboard_regulators), +static struct mc13xxx_platform_data moboard_pmic = { + .regulators = { + .regulators = moboard_regulators, + .num_regulators = ARRAY_SIZE(moboard_regulators), + }, .leds = &moboard_leds, - .flags = MC13783_USE_REGULATOR | MC13783_USE_RTC | - MC13783_USE_ADC | MC13783_USE_LED, + .flags = MC13XXX_USE_REGULATOR | MC13XXX_USE_RTC | + MC13XXX_USE_ADC | MC13XXX_USE_LED, }; static struct spi_board_info moboard_spi_board_info[] __initdata = { @@ -400,19 +402,24 @@ static void usb_xcvr_reset(void) mdelay(1); } -#if defined(CONFIG_USB_ULPI) +static int moboard_usbh2_init_hw(struct platform_device *pdev) +{ + return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED); +} static struct mxc_usbh_platform_data usbh2_pdata __initdata = { + .init = moboard_usbh2_init_hw, .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, - .flags = MXC_EHCI_POWER_PINS_ENABLED, }; static int __init moboard_usbh2_init(void) { struct platform_device *pdev; - usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, - ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); + usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | + ULPI_OTG_DRVVBUS_EXT); + if (!usbh2_pdata.otg) + return -ENODEV; pdev = imx31_add_mxc_ehci_hs(2, &usbh2_pdata); if (IS_ERR(pdev)) @@ -420,10 +427,6 @@ static int __init moboard_usbh2_init(void) return 0; } -#else -static inline int moboard_usbh2_init(void) { return 0; } -#endif - static struct gpio_led mx31moboard_leds[] = { { @@ -503,7 +506,7 @@ core_param(mx31moboard_baseboard, mx31moboard_baseboard, int, 0444); /* * Board specific initialization. */ -static void __init mxc_board_init(void) +static void __init mx31moboard_init(void) { mxc_iomux_setup_multiple_pins(moboard_pins, ARRAY_SIZE(moboard_pins), "moboard"); @@ -564,10 +567,10 @@ struct sys_timer mx31moboard_timer = { MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard") /* Maintainer: Valentin Longchamp, EPFL Mobots group */ - .boot_params = MX3x_PHYS_OFFSET + 0x100, - .map_io = mx31_map_io, - .init_irq = mx31_init_irq, - .init_machine = mxc_board_init, - .timer = &mx31moboard_timer, + .boot_params = MX3x_PHYS_OFFSET + 0x100, + .map_io = mx31_map_io, + .init_early = imx31_init_early, + .init_irq = mx31_init_irq, + .timer = &mx31moboard_timer, + .init_machine = mx31moboard_init, MACHINE_END - |