diff options
Diffstat (limited to '')
-rw-r--r-- | arch/arm/mach-omap1/usb.c | 104 |
1 files changed, 87 insertions, 17 deletions
diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c index d8e9bbda8f7b..0119f3ddb7a6 100644 --- a/arch/arm/mach-omap1/usb.c +++ b/arch/arm/mach-omap1/usb.c @@ -9,14 +9,16 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> +#include <linux/dma-map-ops.h> #include <linux/io.h> +#include <linux/delay.h> +#include <linux/soc/ti/omap1-io.h> #include <asm/irq.h> -#include <mach/mux.h> - -#include <mach/usb.h> - +#include "hardware.h" +#include "mux.h" +#include "usb.h" #include "common.h" /* These routines should handle the standard chip-specific modes @@ -205,8 +207,6 @@ static inline void udc_device_init(struct omap_usb_config *pdata) #endif -#if IS_ENABLED(CONFIG_USB_OHCI_HCD) - /* The dmamask must be set for OHCI to work */ static u64 ohci_dmamask = ~(u32)0; @@ -235,20 +235,15 @@ static struct platform_device ohci_device = { static inline void ohci_device_init(struct omap_usb_config *pdata) { + if (!IS_ENABLED(CONFIG_USB_OHCI_HCD)) + return; + if (cpu_is_omap7xx()) ohci_resources[1].start = INT_7XX_USB_HHC_1; pdata->ohci_device = &ohci_device; pdata->ocpi_enable = &ocpi_enable; } -#else - -static inline void ohci_device_init(struct omap_usb_config *pdata) -{ -} - -#endif - #if defined(CONFIG_USB_OTG) && defined(CONFIG_ARCH_OMAP_OTG) static struct resource otg_resources[] = { @@ -533,6 +528,79 @@ bad: } #ifdef CONFIG_ARCH_OMAP15XX +/* OMAP-1510 OHCI has its own MMU for DMA */ +#define OMAP1510_LB_MEMSIZE 32 /* Should be same as SDRAM size */ +#define OMAP1510_LB_CLOCK_DIV 0xfffec10c +#define OMAP1510_LB_MMU_CTL 0xfffec208 +#define OMAP1510_LB_MMU_LCK 0xfffec224 +#define OMAP1510_LB_MMU_LD_TLB 0xfffec228 +#define OMAP1510_LB_MMU_CAM_H 0xfffec22c +#define OMAP1510_LB_MMU_CAM_L 0xfffec230 +#define OMAP1510_LB_MMU_RAM_H 0xfffec234 +#define OMAP1510_LB_MMU_RAM_L 0xfffec238 + +/* + * Bus address is physical address, except for OMAP-1510 Local Bus. + * OMAP-1510 bus address is translated into a Local Bus address if the + * OMAP bus type is lbus. + */ +#define OMAP1510_LB_OFFSET UL(0x30000000) + +/* + * OMAP-1510 specific Local Bus clock on/off + */ +static int omap_1510_local_bus_power(int on) +{ + if (on) { + omap_writel((1 << 1) | (1 << 0), OMAP1510_LB_MMU_CTL); + udelay(200); + } else { + omap_writel(0, OMAP1510_LB_MMU_CTL); + } + + return 0; +} + +/* + * OMAP-1510 specific Local Bus initialization + * NOTE: This assumes 32MB memory size in OMAP1510LB_MEMSIZE. + * See also arch/mach-omap/memory.h for __virt_to_dma() and + * __dma_to_virt() which need to match with the physical + * Local Bus address below. + */ +static int omap_1510_local_bus_init(void) +{ + unsigned int tlb; + unsigned long lbaddr, physaddr; + + omap_writel((omap_readl(OMAP1510_LB_CLOCK_DIV) & 0xfffffff8) | 0x4, + OMAP1510_LB_CLOCK_DIV); + + /* Configure the Local Bus MMU table */ + for (tlb = 0; tlb < OMAP1510_LB_MEMSIZE; tlb++) { + lbaddr = tlb * 0x00100000 + OMAP1510_LB_OFFSET; + physaddr = tlb * 0x00100000 + PHYS_OFFSET; + omap_writel((lbaddr & 0x0fffffff) >> 22, OMAP1510_LB_MMU_CAM_H); + omap_writel(((lbaddr & 0x003ffc00) >> 6) | 0xc, + OMAP1510_LB_MMU_CAM_L); + omap_writel(physaddr >> 16, OMAP1510_LB_MMU_RAM_H); + omap_writel((physaddr & 0x0000fc00) | 0x300, OMAP1510_LB_MMU_RAM_L); + omap_writel(tlb << 4, OMAP1510_LB_MMU_LCK); + omap_writel(0x1, OMAP1510_LB_MMU_LD_TLB); + } + + /* Enable the walking table */ + omap_writel(omap_readl(OMAP1510_LB_MMU_CTL) | (1 << 3), OMAP1510_LB_MMU_CTL); + udelay(200); + + return 0; +} + +static void omap_1510_local_bus_reset(void) +{ + omap_1510_local_bus_power(1); + omap_1510_local_bus_init(); +} /* ULPD_DPLL_CTRL */ #define DPLL_IOB (1 << 13) @@ -596,17 +664,19 @@ static void __init omap_1510_usb_init(struct omap_usb_config *config) } #endif -#if IS_ENABLED(CONFIG_USB_OHCI_HCD) - if (config->register_host) { + if (IS_ENABLED(CONFIG_USB_OHCI_HCD) && config->register_host) { int status; ohci_device.dev.platform_data = config; + dma_direct_set_offset(&ohci_device.dev, PHYS_OFFSET, + OMAP1510_LB_OFFSET, (u64)-1); status = platform_device_register(&ohci_device); if (status) pr_debug("can't register OHCI device, %d\n", status); /* hcd explicitly gates 48MHz */ + + config->lb_reset = omap_1510_local_bus_reset; } -#endif } #else |