diff options
Diffstat (limited to 'arch/arm/mach-omap2/board-cm-t35.c')
| -rw-r--r-- | arch/arm/mach-omap2/board-cm-t35.c | 53 |
1 files changed, 27 insertions, 26 deletions
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 41b0a2fe0b04..ded100c80a91 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -26,6 +26,7 @@ #include <linux/i2c/at24.h> #include <linux/i2c/twl.h> +#include <linux/regulator/fixed.h> #include <linux/regulator/machine.h> #include <linux/mmc/host.h> @@ -43,7 +44,7 @@ #include <plat/usb.h> #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> -#include <video/omap-panel-dvi.h> +#include <video/omap-panel-tfp410.h> #include <plat/mcspi.h> #include <mach/hardware.h> @@ -81,8 +82,23 @@ static struct omap_smsc911x_platform_data sb_t35_smsc911x_cfg = { .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS, }; +static struct regulator_consumer_supply cm_t35_smsc911x_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x.0"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), +}; + +static struct regulator_consumer_supply sb_t35_smsc911x_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x.1"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.1"), +}; + static void __init cm_t35_init_ethernet(void) { + regulator_register_fixed(0, cm_t35_smsc911x_supplies, + ARRAY_SIZE(cm_t35_smsc911x_supplies)); + regulator_register_fixed(1, sb_t35_smsc911x_supplies, + ARRAY_SIZE(sb_t35_smsc911x_supplies)); + gpmc_smsc911x_init(&cm_t35_smsc911x_cfg); gpmc_smsc911x_init(&sb_t35_smsc911x_cfg); } @@ -202,25 +218,6 @@ static void cm_t35_panel_disable_lcd(struct omap_dss_device *dssdev) gpio_set_value(CM_T35_LCD_EN_GPIO, 0); } -static int cm_t35_panel_enable_dvi(struct omap_dss_device *dssdev) -{ - if (lcd_enabled) { - printk(KERN_ERR "cannot enable DVI, LCD is enabled\n"); - return -EINVAL; - } - - gpio_set_value(CM_T35_DVI_EN_GPIO, 0); - dvi_enabled = 1; - - return 0; -} - -static void cm_t35_panel_disable_dvi(struct omap_dss_device *dssdev) -{ - gpio_set_value(CM_T35_DVI_EN_GPIO, 1); - dvi_enabled = 0; -} - static int cm_t35_panel_enable_tv(struct omap_dss_device *dssdev) { return 0; @@ -244,15 +241,14 @@ static struct omap_dss_device cm_t35_lcd_device = { .phy.dpi.data_lines = 18, }; -static struct panel_dvi_platform_data dvi_panel = { - .platform_enable = cm_t35_panel_enable_dvi, - .platform_disable = cm_t35_panel_disable_dvi, +static struct tfp410_platform_data dvi_panel = { + .power_down_gpio = CM_T35_DVI_EN_GPIO, }; static struct omap_dss_device cm_t35_dvi_device = { .name = "dvi", .type = OMAP_DISPLAY_TYPE_DPI, - .driver_name = "dvi", + .driver_name = "tfp410", .data = &dvi_panel, .phy.dpi.data_lines = 24, }; @@ -300,7 +296,6 @@ static struct spi_board_info cm_t35_lcd_spi_board_info[] __initdata = { static struct gpio cm_t35_dss_gpios[] __initdata = { { CM_T35_LCD_EN_GPIO, GPIOF_OUT_INIT_LOW, "lcd enable" }, { CM_T35_LCD_BL_GPIO, GPIOF_OUT_INIT_LOW, "lcd bl enable" }, - { CM_T35_DVI_EN_GPIO, GPIOF_OUT_INIT_HIGH, "dvi enable" }, }; static void __init cm_t35_init_display(void) @@ -319,7 +314,6 @@ static void __init cm_t35_init_display(void) gpio_export(CM_T35_LCD_EN_GPIO, 0); gpio_export(CM_T35_LCD_BL_GPIO, 0); - gpio_export(CM_T35_DVI_EN_GPIO, 0); msleep(50); gpio_set_value(CM_T35_LCD_EN_GPIO, 1); @@ -482,6 +476,10 @@ static struct twl4030_gpio_platform_data cm_t35_gpio_data = { .setup = cm_t35_twl_gpio_setup, }; +static struct twl4030_power_data cm_t35_power_data = { + .use_poweroff = true, +}; + static struct twl4030_platform_data cm_t35_twldata = { /* platform_data for children goes here */ .keypad = &cm_t35_kp_data, @@ -489,6 +487,7 @@ static struct twl4030_platform_data cm_t35_twldata = { .vmmc1 = &cm_t35_vmmc1, .vsim = &cm_t35_vsim, .vio = &cm_t35_vio, + .power = &cm_t35_power_data, }; static void __init cm_t35_init_i2c(void) @@ -670,6 +669,7 @@ MACHINE_START(CM_T35, "Compulab CM-T35") .init_irq = omap3_init_irq, .handle_irq = omap3_intc_handle_irq, .init_machine = cm_t35_init, + .init_late = omap35xx_init_late, .timer = &omap3_timer, .restart = omap_prcm_restart, MACHINE_END @@ -682,6 +682,7 @@ MACHINE_START(CM_T3730, "Compulab CM-T3730") .init_irq = omap3_init_irq, .handle_irq = omap3_intc_handle_irq, .init_machine = cm_t3730_init, + .init_late = omap3630_init_late, .timer = &omap3_timer, .restart = omap_prcm_restart, MACHINE_END |