diff options
Diffstat (limited to '')
| -rw-r--r-- | arch/arm/mach-omap2/board-devkit8000.c | 56 |
1 files changed, 35 insertions, 21 deletions
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 451e7ff08b18..9a2a31e011ce 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -46,6 +46,7 @@ #include <plat/nand.h> #include <plat/usb.h> #include <plat/display.h> +#include <plat/panel-generic-dpi.h> #include <plat/mcspi.h> #include <linux/input/matrix_keypad.h> @@ -114,9 +115,6 @@ static struct omap2_hsmmc_info mmc[] = { static int devkit8000_panel_enable_lcd(struct omap_dss_device *dssdev) { - twl_i2c_write_u8(TWL4030_MODULE_GPIO, 0x80, REG_GPIODATADIR1); - twl_i2c_write_u8(TWL4030_MODULE_LED, 0x0, 0x0); - if (gpio_is_valid(dssdev->reset_gpio)) gpio_set_value_cansleep(dssdev->reset_gpio, 1); return 0; @@ -149,23 +147,32 @@ static struct regulator_consumer_supply devkit8000_vmmc1_supply = static struct regulator_consumer_supply devkit8000_vio_supply = REGULATOR_SUPPLY("vcc", "spi2.0"); +static struct panel_generic_dpi_data lcd_panel = { + .name = "generic", + .platform_enable = devkit8000_panel_enable_lcd, + .platform_disable = devkit8000_panel_disable_lcd, +}; + static struct omap_dss_device devkit8000_lcd_device = { .name = "lcd", - .driver_name = "generic_panel", .type = OMAP_DISPLAY_TYPE_DPI, + .driver_name = "generic_dpi_panel", + .data = &lcd_panel, .phy.dpi.data_lines = 24, - .reset_gpio = -EINVAL, /* will be replaced */ - .platform_enable = devkit8000_panel_enable_lcd, - .platform_disable = devkit8000_panel_disable_lcd, }; + +static struct panel_generic_dpi_data dvi_panel = { + .name = "generic", + .platform_enable = devkit8000_panel_enable_dvi, + .platform_disable = devkit8000_panel_disable_dvi, +}; + static struct omap_dss_device devkit8000_dvi_device = { .name = "dvi", - .driver_name = "generic_panel", .type = OMAP_DISPLAY_TYPE_DPI, + .driver_name = "generic_dpi_panel", + .data = &dvi_panel, .phy.dpi.data_lines = 24, - .reset_gpio = -EINVAL, /* will be replaced */ - .platform_enable = devkit8000_panel_enable_dvi, - .platform_disable = devkit8000_panel_disable_dvi, }; static struct omap_dss_device devkit8000_tv_device = { @@ -237,6 +244,8 @@ static struct gpio_led gpio_leds[]; static int devkit8000_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { + int ret; + omap_mux_init_gpio(29, OMAP_PIN_INPUT); /* gpio + 0 is "mmc0_cd" (input/IRQ) */ mmc[0].gpio_cd = gpio + 0; @@ -245,17 +254,23 @@ static int devkit8000_twl_gpio_setup(struct device *dev, /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; - /* gpio + 1 is "LCD_PWREN" (out, active high) */ - devkit8000_lcd_device.reset_gpio = gpio + 1; - gpio_request(devkit8000_lcd_device.reset_gpio, "LCD_PWREN"); - /* Disable until needed */ - gpio_direction_output(devkit8000_lcd_device.reset_gpio, 0); + /* TWL4030_GPIO_MAX + 0 is "LCD_PWREN" (out, active high) */ + devkit8000_lcd_device.reset_gpio = gpio + TWL4030_GPIO_MAX + 0; + ret = gpio_request_one(devkit8000_lcd_device.reset_gpio, + GPIOF_DIR_OUT | GPIOF_INIT_LOW, "LCD_PWREN"); + if (ret < 0) { + devkit8000_lcd_device.reset_gpio = -EINVAL; + printk(KERN_ERR "Failed to request GPIO for LCD_PWRN\n"); + } /* gpio + 7 is "DVI_PD" (out, active low) */ devkit8000_dvi_device.reset_gpio = gpio + 7; - gpio_request(devkit8000_dvi_device.reset_gpio, "DVI PowerDown"); - /* Disable until needed */ - gpio_direction_output(devkit8000_dvi_device.reset_gpio, 0); + ret = gpio_request_one(devkit8000_dvi_device.reset_gpio, + GPIOF_DIR_OUT | GPIOF_INIT_LOW, "DVI PowerDown"); + if (ret < 0) { + devkit8000_dvi_device.reset_gpio = -EINVAL; + printk(KERN_ERR "Failed to request GPIO for DVI PowerDown\n"); + } return 0; } @@ -265,8 +280,7 @@ static struct twl4030_gpio_platform_data devkit8000_gpio_data = { .irq_base = TWL4030_GPIO_IRQ_BASE, .irq_end = TWL4030_GPIO_IRQ_END, .use_leds = true, - .pullups = BIT(1), - .pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13) + .pulldowns = BIT(1) | BIT(2) | BIT(6) | BIT(8) | BIT(13) | BIT(15) | BIT(16) | BIT(17), .setup = devkit8000_twl_gpio_setup, }; |