1 files changed, 0 insertions, 100 deletions
diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.c b/arch/arm/mach-omap2/gpmc-smsc911x.c
deleted file mode 100644
index 2757504a13c4..000000000000
--- a/arch/arm/mach-omap2/gpmc-smsc911x.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/gpmc-smsc911x.c
- *
- * Copyright (C) 2009 Li-Pro.Net
- * Stephan Linz <linz@li-pro.net>
- *
- * Modified from linux/arch/arm/mach-omap2/gpmc-smc91x.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#define pr_fmt(fmt) "%s: " fmt, __func__
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/smsc911x.h>
-
-#include "gpmc.h"
-#include "gpmc-smsc911x.h"
-
-static struct resource gpmc_smsc911x_resources[] = {
-	[0] = {
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.flags		= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
-	},
-};
-
-static struct smsc911x_platform_config gpmc_smsc911x_config = {
-	.phy_interface	= PHY_INTERFACE_MODE_MII,
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
-};
-
-/*
- * Initialize smsc911x device connected to the GPMC. Note that we
- * assume that pin multiplexing is done in the board-*.c file,
- * or in the bootloader.
- */
-void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *gpmc_cfg)
-{
-	struct platform_device *pdev;
-	unsigned long cs_mem_base;
-	int ret;
-
-	if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) {
-		pr_err("Failed to request GPMC mem region\n");
-		return;
-	}
-
-	gpmc_smsc911x_resources[0].start = cs_mem_base + 0x0;
-	gpmc_smsc911x_resources[0].end = cs_mem_base + 0xff;
-
-	if (gpio_request_one(gpmc_cfg->gpio_irq, GPIOF_IN, "smsc911x irq")) {
-		pr_err("Failed to request IRQ GPIO%d\n", gpmc_cfg->gpio_irq);
-		goto free1;
-	}
-
-	gpmc_smsc911x_resources[1].start = gpio_to_irq(gpmc_cfg->gpio_irq);
-
-	if (gpio_is_valid(gpmc_cfg->gpio_reset)) {
-		ret = gpio_request_one(gpmc_cfg->gpio_reset,
-				       GPIOF_OUT_INIT_HIGH, "smsc911x reset");
-		if (ret) {
-			pr_err("Failed to request reset GPIO%d\n",
-			       gpmc_cfg->gpio_reset);
-			goto free2;
-		}
-
-		gpio_set_value(gpmc_cfg->gpio_reset, 0);
-		msleep(100);
-		gpio_set_value(gpmc_cfg->gpio_reset, 1);
-	}
-
-	gpmc_smsc911x_config.flags = gpmc_cfg->flags ? : SMSC911X_USE_16BIT;
-
-	pdev = platform_device_register_resndata(NULL, "smsc911x", gpmc_cfg->id,
-		 gpmc_smsc911x_resources, ARRAY_SIZE(gpmc_smsc911x_resources),
-		 &gpmc_smsc911x_config, sizeof(gpmc_smsc911x_config));
-	if (IS_ERR(pdev)) {
-		pr_err("Unable to register platform device\n");
-		gpio_free(gpmc_cfg->gpio_reset);
-		goto free2;
-	}
-
-	return;
-
-free2:
-	gpio_free(gpmc_cfg->gpio_irq);
-free1:
-	gpmc_cs_free(gpmc_cfg->cs);
-
-	pr_err("Could not initialize smsc911x device\n");
-}