diff options
Diffstat (limited to 'arch/arm/mach-omap2/pm-domain.c')
| -rw-r--r-- | arch/arm/mach-omap2/pm-domain.c | 300 |
1 files changed, 300 insertions, 0 deletions
diff --git a/arch/arm/mach-omap2/pm-domain.c b/arch/arm/mach-omap2/pm-domain.c new file mode 100644 index 000000000000..5e20e740cde5 --- /dev/null +++ b/arch/arm/mach-omap2/pm-domain.c @@ -0,0 +1,300 @@ +/* + * linux/arch/arm/mach-omap2/pm-domain.c + * + * Power domain functions for OMAP2 + * + * Copyright (C) 2006 Nokia Corporation + * Tony Lindgren <tony@atomide.com> + * + * Some code based on earlier OMAP2 sample PM code + * Copyright (C) 2005 Texas Instruments, Inc. + * Richard Woodruff <r-woodruff2@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/clk.h> + +#include <asm/io.h> + +#include "prcm-regs.h" + +/* Power domain offsets */ +#define PM_MPU_OFFSET 0x100 +#define PM_CORE_OFFSET 0x200 +#define PM_GFX_OFFSET 0x300 +#define PM_WKUP_OFFSET 0x400 /* Autoidle only */ +#define PM_PLL_OFFSET 0x500 /* Autoidle only */ +#define PM_DSP_OFFSET 0x800 +#define PM_MDM_OFFSET 0xc00 + +/* Power domain wake-up dependency control register */ +#define PM_WKDEP_OFFSET 0xc8 +#define EN_MDM (1 << 5) +#define EN_WKUP (1 << 4) +#define EN_GFX (1 << 3) +#define EN_DSP (1 << 2) +#define EN_MPU (1 << 1) +#define EN_CORE (1 << 0) + +/* Core power domain state transition control register */ +#define PM_PWSTCTRL_OFFSET 0xe0 +#define FORCESTATE (1 << 18) /* Only for DSP & GFX */ +#define MEM4RETSTATE (1 << 6) +#define MEM3RETSTATE (1 << 5) +#define MEM2RETSTATE (1 << 4) +#define MEM1RETSTATE (1 << 3) +#define LOGICRETSTATE (1 << 2) /* Logic is retained */ +#define POWERSTATE_OFF 0x3 +#define POWERSTATE_RETENTION 0x1 +#define POWERSTATE_ON 0x0 + +/* Power domain state register */ +#define PM_PWSTST_OFFSET 0xe4 + +/* Hardware supervised state transition control register */ +#define CM_CLKSTCTRL_OFFSET 0x48 +#define AUTOSTAT_MPU (1 << 0) /* MPU */ +#define AUTOSTAT_DSS (1 << 2) /* Core */ +#define AUTOSTAT_L4 (1 << 1) /* Core */ +#define AUTOSTAT_L3 (1 << 0) /* Core */ +#define AUTOSTAT_GFX (1 << 0) /* GFX */ +#define AUTOSTAT_IVA (1 << 8) /* 2420 IVA in DSP domain */ +#define AUTOSTAT_DSP (1 << 0) /* DSP */ +#define AUTOSTAT_MDM (1 << 0) /* MDM */ + +/* Automatic control of interface clock idling */ +#define CM_AUTOIDLE1_OFFSET 0x30 +#define CM_AUTOIDLE2_OFFSET 0x34 /* Core only */ +#define CM_AUTOIDLE3_OFFSET 0x38 /* Core only */ +#define CM_AUTOIDLE4_OFFSET 0x3c /* Core only */ +#define AUTO_54M(x) (((x) & 0x3) << 6) +#define AUTO_96M(x) (((x) & 0x3) << 2) +#define AUTO_DPLL(x) (((x) & 0x3) << 0) +#define AUTO_STOPPED 0x3 +#define AUTO_BYPASS_FAST 0x2 /* DPLL only */ +#define AUTO_BYPASS_LOW_POWER 0x1 /* DPLL only */ +#define AUTO_DISABLED 0x0 + +/* Voltage control PRCM_VOLTCTRL bits */ +#define AUTO_EXTVOLT (1 << 15) +#define FORCE_EXTVOLT (1 << 14) +#define SETOFF_LEVEL(x) (((x) & 0x3) << 12) +#define MEMRETCTRL (1 << 8) +#define SETRET_LEVEL(x) (((x) & 0x3) << 6) +#define VOLT_LEVEL(x) (((x) & 0x3) << 0) + +#define OMAP24XX_PRCM_VBASE IO_ADDRESS(OMAP24XX_PRCM_BASE) +#define prcm_readl(r) __raw_readl(OMAP24XX_PRCM_VBASE + (r)) +#define prcm_writel(v, r) __raw_writel((v), OMAP24XX_PRCM_VBASE + (r)) + +static u32 pmdomain_get_wakeup_dependencies(int domain_offset) +{ + return prcm_readl(domain_offset + PM_WKDEP_OFFSET); +} + +static void pmdomain_set_wakeup_dependencies(u32 state, int domain_offset) +{ + prcm_writel(state, domain_offset + PM_WKDEP_OFFSET); +} + +static u32 pmdomain_get_powerstate(int domain_offset) +{ + return prcm_readl(domain_offset + PM_PWSTCTRL_OFFSET); +} + +static void pmdomain_set_powerstate(u32 state, int domain_offset) +{ + prcm_writel(state, domain_offset + PM_PWSTCTRL_OFFSET); +} + +static u32 pmdomain_get_clock_autocontrol(int domain_offset) +{ + return prcm_readl(domain_offset + CM_CLKSTCTRL_OFFSET); +} + +static void pmdomain_set_clock_autocontrol(u32 state, int domain_offset) +{ + prcm_writel(state, domain_offset + CM_CLKSTCTRL_OFFSET); +} + +static u32 pmdomain_get_clock_autoidle1(int domain_offset) +{ + return prcm_readl(domain_offset + CM_AUTOIDLE1_OFFSET); +} + +/* Core domain only */ +static u32 pmdomain_get_clock_autoidle2(int domain_offset) +{ + return prcm_readl(domain_offset + CM_AUTOIDLE2_OFFSET); +} + +/* Core domain only */ +static u32 pmdomain_get_clock_autoidle3(int domain_offset) +{ + return prcm_readl(domain_offset + CM_AUTOIDLE3_OFFSET); +} + +/* Core domain only */ +static u32 pmdomain_get_clock_autoidle4(int domain_offset) +{ + return prcm_readl(domain_offset + CM_AUTOIDLE4_OFFSET); +} + +static void pmdomain_set_clock_autoidle1(u32 state, int domain_offset) +{ + prcm_writel(state, CM_AUTOIDLE1_OFFSET + domain_offset); +} + +/* Core domain only */ +static void pmdomain_set_clock_autoidle2(u32 state, int domain_offset) +{ + prcm_writel(state, CM_AUTOIDLE2_OFFSET + domain_offset); +} + +/* Core domain only */ +static void pmdomain_set_clock_autoidle3(u32 state, int domain_offset) +{ + prcm_writel(state, CM_AUTOIDLE3_OFFSET + domain_offset); +} + +/* Core domain only */ +static void pmdomain_set_clock_autoidle4(u32 state, int domain_offset) +{ + prcm_writel(state, CM_AUTOIDLE4_OFFSET + domain_offset); +} + +/* + * Configures power management domains to idle clocks automatically. + */ +void pmdomain_set_autoidle(void) +{ + u32 val; + + /* Set PLL auto stop for 54M, 96M & DPLL */ + pmdomain_set_clock_autoidle1(AUTO_54M(AUTO_STOPPED) | + AUTO_96M(AUTO_STOPPED) | + AUTO_DPLL(AUTO_STOPPED), PM_PLL_OFFSET); + + /* External clock input control + * REVISIT: Should this be in clock framework? + */ + PRCM_CLKSRC_CTRL |= (0x3 << 3); + + /* Configure number of 32KHz clock cycles for sys_clk */ + PRCM_CLKSSETUP = 0x00ff; + + /* Configure automatic voltage transition */ + PRCM_VOLTSETUP = 0; + val = PRCM_VOLTCTRL; + val &= ~(SETOFF_LEVEL(0x3) | VOLT_LEVEL(0x3)); + val |= SETOFF_LEVEL(1) | VOLT_LEVEL(1) | AUTO_EXTVOLT; + PRCM_VOLTCTRL = val; + + /* Disable emulation tools functional clock */ + PRCM_CLKEMUL_CTRL = 0x0; + + /* Set core memory retention state */ + val = pmdomain_get_powerstate(PM_CORE_OFFSET); + if (cpu_is_omap2420()) { + val &= ~(0x7 << 3); + val |= (MEM3RETSTATE | MEM2RETSTATE | MEM1RETSTATE); + } else { + val &= ~(0xf << 3); + val |= (MEM4RETSTATE | MEM3RETSTATE | MEM2RETSTATE | + MEM1RETSTATE); + } + pmdomain_set_powerstate(val, PM_CORE_OFFSET); + + /* OCP interface smart idle. REVISIT: Enable autoidle bit0 ? */ + val = SMS_SYSCONFIG; + val &= ~(0x3 << 3); + val |= (0x2 << 3) | (1 << 0); + SMS_SYSCONFIG |= val; + + val = SDRC_SYSCONFIG; + val &= ~(0x3 << 3); + val |= (0x2 << 3); + SDRC_SYSCONFIG = val; + + /* Configure L3 interface for smart idle. + * REVISIT: Enable autoidle bit0 ? + */ + val = GPMC_SYSCONFIG; + val &= ~(0x3 << 3); + val |= (0x2 << 3) | (1 << 0); + GPMC_SYSCONFIG = val; + + pmdomain_set_powerstate(LOGICRETSTATE | POWERSTATE_RETENTION, + PM_MPU_OFFSET); + pmdomain_set_powerstate(POWERSTATE_RETENTION, PM_CORE_OFFSET); + if (!cpu_is_omap2420()) + pmdomain_set_powerstate(POWERSTATE_RETENTION, PM_MDM_OFFSET); + + /* Assume suspend function has saved the state for DSP and GFX */ + pmdomain_set_powerstate(FORCESTATE | POWERSTATE_OFF, PM_DSP_OFFSET); + pmdomain_set_powerstate(FORCESTATE | POWERSTATE_OFF, PM_GFX_OFFSET); + +#if 0 + /* REVISIT: Internal USB needs special handling */ + force_standby_usb(); + if (cpu_is_omap2430()) + force_hsmmc(); + sdram_self_refresh_on_idle_req(1); +#endif + + /* Enable clock auto control for all domains. + * Note that CORE domain includes also DSS, L4 & L3. + */ + pmdomain_set_clock_autocontrol(AUTOSTAT_MPU, PM_MPU_OFFSET); + pmdomain_set_clock_autocontrol(AUTOSTAT_GFX, PM_GFX_OFFSET); + pmdomain_set_clock_autocontrol(AUTOSTAT_DSS | AUTOSTAT_L4 | AUTOSTAT_L3, + PM_CORE_OFFSET); + if (cpu_is_omap2420()) + pmdomain_set_clock_autocontrol(AUTOSTAT_IVA | AUTOSTAT_DSP, + PM_DSP_OFFSET); + else { + pmdomain_set_clock_autocontrol(AUTOSTAT_DSP, PM_DSP_OFFSET); + pmdomain_set_clock_autocontrol(AUTOSTAT_MDM, PM_MDM_OFFSET); + } + + /* Enable clock autoidle for all domains */ + pmdomain_set_clock_autoidle1(0x2, PM_DSP_OFFSET); + if (cpu_is_omap2420()) { + pmdomain_set_clock_autoidle1(0xfffffff9, PM_CORE_OFFSET); + pmdomain_set_clock_autoidle2(0x7, PM_CORE_OFFSET); + pmdomain_set_clock_autoidle1(0x3f, PM_WKUP_OFFSET); + } else { + pmdomain_set_clock_autoidle1(0xeafffff1, PM_CORE_OFFSET); + pmdomain_set_clock_autoidle2(0xfff, PM_CORE_OFFSET); + pmdomain_set_clock_autoidle1(0x7f, PM_WKUP_OFFSET); + pmdomain_set_clock_autoidle1(0x3, PM_MDM_OFFSET); + } + pmdomain_set_clock_autoidle3(0x7, PM_CORE_OFFSET); + pmdomain_set_clock_autoidle4(0x1f, PM_CORE_OFFSET); +} + +/* + * Initializes power domains by removing wake-up dependencies and powering + * down DSP and GFX. Gets called from PM init. Note that DSP and IVA code + * must re-enable DSP and GFX when used. + */ +void __init pmdomain_init(void) +{ + /* Remove all domain wakeup dependencies */ + pmdomain_set_wakeup_dependencies(EN_WKUP | EN_CORE, PM_MPU_OFFSET); + pmdomain_set_wakeup_dependencies(0, PM_DSP_OFFSET); + pmdomain_set_wakeup_dependencies(0, PM_GFX_OFFSET); + pmdomain_set_wakeup_dependencies(EN_WKUP | EN_MPU, PM_CORE_OFFSET); + if (cpu_is_omap2430()) + pmdomain_set_wakeup_dependencies(0, PM_MDM_OFFSET); + + /* Power down DSP and GFX */ + pmdomain_set_powerstate(POWERSTATE_OFF | FORCESTATE, PM_DSP_OFFSET); + pmdomain_set_powerstate(POWERSTATE_OFF | FORCESTATE, PM_GFX_OFFSET); +} |