diff options
Diffstat (limited to '')
| -rw-r--r-- | arch/arm/mach-omap2/pm34xx.c | 159 |
1 files changed, 13 insertions, 146 deletions
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 2f864e4b085d..0c5e3a46a3ad 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -29,6 +29,7 @@ #include <linux/delay.h> #include <linux/slab.h> #include <linux/console.h> +#include <trace/events/power.h> #include <plat/sram.h> #include "clockdomain.h" @@ -311,11 +312,6 @@ static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id) return IRQ_HANDLED; } -static void restore_control_register(u32 val) -{ - __asm__ __volatile__ ("mcr p15, 0, %0, c1, c0, 0" : : "r" (val)); -} - /* Function to restore the table entry that was modified for enabling MMU */ static void restore_table_entry(void) { @@ -337,7 +333,7 @@ static void restore_table_entry(void) control_reg_value = __raw_readl(scratchpad_address + OMAP343X_CONTROL_REG_VALUE_OFFSET); /* This will enable caches and prediction */ - restore_control_register(control_reg_value); + set_cr(control_reg_value); } void omap_sram_idle(void) @@ -496,7 +492,7 @@ console_still_active: pwrdm_post_transition(); - omap2_clkdm_allow_idle(mpu_pwrdm->pwrdm_clkdms[0]); + clkdm_allow_idle(mpu_pwrdm->pwrdm_clkdms[0]); } int omap3_can_sleep(void) @@ -519,8 +515,14 @@ static void omap3_pm_idle(void) if (omap_irq_pending() || need_resched()) goto out; + trace_power_start(POWER_CSTATE, 1, smp_processor_id()); + trace_cpu_idle(1, smp_processor_id()); + omap_sram_idle(); + trace_power_end(smp_processor_id()); + trace_cpu_idle(PWR_EVENT_EXIT, smp_processor_id()); + out: local_fiq_enable(); local_irq_enable(); @@ -688,149 +690,15 @@ static void __init omap3_d2d_idle(void) static void __init prcm_setup_regs(void) { - u32 omap3630_auto_uart4_mask = cpu_is_omap3630() ? - OMAP3630_AUTO_UART4_MASK : 0; u32 omap3630_en_uart4_mask = cpu_is_omap3630() ? OMAP3630_EN_UART4_MASK : 0; u32 omap3630_grpsel_uart4_mask = cpu_is_omap3630() ? OMAP3630_GRPSEL_UART4_MASK : 0; - - /* XXX Reset all wkdeps. This should be done when initializing - * powerdomains */ - omap2_prm_write_mod_reg(0, OMAP3430_IVA2_MOD, PM_WKDEP); - omap2_prm_write_mod_reg(0, MPU_MOD, PM_WKDEP); - omap2_prm_write_mod_reg(0, OMAP3430_DSS_MOD, PM_WKDEP); - omap2_prm_write_mod_reg(0, OMAP3430_NEON_MOD, PM_WKDEP); - omap2_prm_write_mod_reg(0, OMAP3430_CAM_MOD, PM_WKDEP); - omap2_prm_write_mod_reg(0, OMAP3430_PER_MOD, PM_WKDEP); - if (omap_rev() > OMAP3430_REV_ES1_0) { - omap2_prm_write_mod_reg(0, OMAP3430ES2_SGX_MOD, PM_WKDEP); - omap2_prm_write_mod_reg(0, OMAP3430ES2_USBHOST_MOD, PM_WKDEP); - } else - omap2_prm_write_mod_reg(0, GFX_MOD, PM_WKDEP); - - /* - * Enable interface clock autoidle for all modules. - * Note that in the long run this should be done by clockfw - */ - omap2_cm_write_mod_reg( - OMAP3430_AUTO_MODEM_MASK | - OMAP3430ES2_AUTO_MMC3_MASK | - OMAP3430ES2_AUTO_ICR_MASK | - OMAP3430_AUTO_AES2_MASK | - OMAP3430_AUTO_SHA12_MASK | - OMAP3430_AUTO_DES2_MASK | - OMAP3430_AUTO_MMC2_MASK | - OMAP3430_AUTO_MMC1_MASK | - OMAP3430_AUTO_MSPRO_MASK | - OMAP3430_AUTO_HDQ_MASK | - OMAP3430_AUTO_MCSPI4_MASK | - OMAP3430_AUTO_MCSPI3_MASK | - OMAP3430_AUTO_MCSPI2_MASK | - OMAP3430_AUTO_MCSPI1_MASK | - OMAP3430_AUTO_I2C3_MASK | - OMAP3430_AUTO_I2C2_MASK | - OMAP3430_AUTO_I2C1_MASK | - OMAP3430_AUTO_UART2_MASK | - OMAP3430_AUTO_UART1_MASK | - OMAP3430_AUTO_GPT11_MASK | - OMAP3430_AUTO_GPT10_MASK | - OMAP3430_AUTO_MCBSP5_MASK | - OMAP3430_AUTO_MCBSP1_MASK | - OMAP3430ES1_AUTO_FAC_MASK | /* This is es1 only */ - OMAP3430_AUTO_MAILBOXES_MASK | - OMAP3430_AUTO_OMAPCTRL_MASK | - OMAP3430ES1_AUTO_FSHOSTUSB_MASK | - OMAP3430_AUTO_HSOTGUSB_MASK | - OMAP3430_AUTO_SAD2D_MASK | - OMAP3430_AUTO_SSI_MASK, - CORE_MOD, CM_AUTOIDLE1); - - omap2_cm_write_mod_reg( - OMAP3430_AUTO_PKA_MASK | - OMAP3430_AUTO_AES1_MASK | - OMAP3430_AUTO_RNG_MASK | - OMAP3430_AUTO_SHA11_MASK | - OMAP3430_AUTO_DES1_MASK, - CORE_MOD, CM_AUTOIDLE2); - - if (omap_rev() > OMAP3430_REV_ES1_0) { - omap2_cm_write_mod_reg( - OMAP3430_AUTO_MAD2D_MASK | - OMAP3430ES2_AUTO_USBTLL_MASK, - CORE_MOD, CM_AUTOIDLE3); - } - - omap2_cm_write_mod_reg( - OMAP3430_AUTO_WDT2_MASK | - OMAP3430_AUTO_WDT1_MASK | - OMAP3430_AUTO_GPIO1_MASK | - OMAP3430_AUTO_32KSYNC_MASK | - OMAP3430_AUTO_GPT12_MASK | - OMAP3430_AUTO_GPT1_MASK, - WKUP_MOD, CM_AUTOIDLE); - - omap2_cm_write_mod_reg( - OMAP3430_AUTO_DSS_MASK, - OMAP3430_DSS_MOD, - CM_AUTOIDLE); - - omap2_cm_write_mod_reg( - OMAP3430_AUTO_CAM_MASK, - OMAP3430_CAM_MOD, - CM_AUTOIDLE); - - omap2_cm_write_mod_reg( - omap3630_auto_uart4_mask | - OMAP3430_AUTO_GPIO6_MASK | - OMAP3430_AUTO_GPIO5_MASK | - OMAP3430_AUTO_GPIO4_MASK | - OMAP3430_AUTO_GPIO3_MASK | - OMAP3430_AUTO_GPIO2_MASK | - OMAP3430_AUTO_WDT3_MASK | - OMAP3430_AUTO_UART3_MASK | - OMAP3430_AUTO_GPT9_MASK | - OMAP3430_AUTO_GPT8_MASK | - OMAP3430_AUTO_GPT7_MASK | - OMAP3430_AUTO_GPT6_MASK | - OMAP3430_AUTO_GPT5_MASK | - OMAP3430_AUTO_GPT4_MASK | - OMAP3430_AUTO_GPT3_MASK | - OMAP3430_AUTO_GPT2_MASK | - OMAP3430_AUTO_MCBSP4_MASK | - OMAP3430_AUTO_MCBSP3_MASK | - OMAP3430_AUTO_MCBSP2_MASK, - OMAP3430_PER_MOD, - CM_AUTOIDLE); - - if (omap_rev() > OMAP3430_REV_ES1_0) { - omap2_cm_write_mod_reg( - OMAP3430ES2_AUTO_USBHOST_MASK, - OMAP3430ES2_USBHOST_MOD, - CM_AUTOIDLE); - } - + /* XXX This should be handled by hwmod code or SCM init code */ omap_ctrl_writel(OMAP3430_AUTOIDLE_MASK, OMAP2_CONTROL_SYSCONFIG); /* - * Set all plls to autoidle. This is needed until autoidle is - * enabled by clockfw - */ - omap2_cm_write_mod_reg(1 << OMAP3430_AUTO_IVA2_DPLL_SHIFT, - OMAP3430_IVA2_MOD, CM_AUTOIDLE2); - omap2_cm_write_mod_reg(1 << OMAP3430_AUTO_MPU_DPLL_SHIFT, - MPU_MOD, - CM_AUTOIDLE2); - omap2_cm_write_mod_reg((1 << OMAP3430_AUTO_PERIPH_DPLL_SHIFT) | - (1 << OMAP3430_AUTO_CORE_DPLL_SHIFT), - PLL_MOD, - CM_AUTOIDLE); - omap2_cm_write_mod_reg(1 << OMAP3430ES2_AUTO_PERIPH2_DPLL_SHIFT, - PLL_MOD, - CM_AUTOIDLE2); - - /* * Enable control of expternal oscillator through * sys_clkreq. In the long run clock framework should * take care of this. @@ -928,8 +796,7 @@ void omap3_pm_off_mode_enable(int enable) pwrst->pwrdm == core_pwrdm && state == PWRDM_POWER_OFF) { pwrst->next_state = PWRDM_POWER_RET; - WARN_ONCE(1, - "%s: Core OFF disabled due to errata i583\n", + pr_warn("%s: Core OFF disabled due to errata i583\n", __func__); } else { pwrst->next_state = state; @@ -990,10 +857,10 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused) static int __init clkdms_setup(struct clockdomain *clkdm, void *unused) { if (clkdm->flags & CLKDM_CAN_ENABLE_AUTO) - omap2_clkdm_allow_idle(clkdm); + clkdm_allow_idle(clkdm); else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP && atomic_read(&clkdm->usecount) == 0) - omap2_clkdm_sleep(clkdm); + clkdm_sleep(clkdm); return 0; } |