diff options
Diffstat (limited to 'arch/arm/mach-omap2/prcm.c')
| -rw-r--r-- | arch/arm/mach-omap2/prcm.c | 188 |
1 files changed, 0 insertions, 188 deletions
diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c deleted file mode 100644 index 0f51e034e0aa..000000000000 --- a/arch/arm/mach-omap2/prcm.c +++ /dev/null @@ -1,188 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/prcm.c - * - * OMAP 24xx Power Reset and Clock Management (PRCM) functions - * - * Copyright (C) 2005 Nokia Corporation - * - * Written by Tony Lindgren <tony.lindgren@nokia.com> - * - * Copyright (C) 2007 Texas Instruments, Inc. - * Rajendra Nayak <rnayak@ti.com> - * - * Some pieces of code Copyright (C) 2005 Texas Instruments, Inc. - * Upgraded with OMAP4 support by Abhijit Pagare <abhijitpagare@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/delay.h> -#include <linux/export.h> - -#include "common.h" -#include <plat/prcm.h> - -#include "clock.h" -#include "clock2xxx.h" -#include "cm2xxx_3xxx.h" -#include "prm2xxx_3xxx.h" -#include "prm44xx.h" -#include "prminst44xx.h" -#include "cminst44xx.h" -#include "prm-regbits-24xx.h" -#include "prm-regbits-44xx.h" -#include "control.h" - -void __iomem *prm_base; -void __iomem *cm_base; -void __iomem *cm2_base; -void __iomem *prcm_mpu_base; - -#define MAX_MODULE_ENABLE_WAIT 100000 - -u32 omap_prcm_get_reset_sources(void) -{ - /* XXX This presumably needs modification for 34XX */ - if (cpu_is_omap24xx() || cpu_is_omap34xx()) - return omap2_prm_read_mod_reg(WKUP_MOD, OMAP2_RM_RSTST) & 0x7f; - if (cpu_is_omap44xx()) - return omap2_prm_read_mod_reg(WKUP_MOD, OMAP4_RM_RSTST) & 0x7f; - - return 0; -} -EXPORT_SYMBOL(omap_prcm_get_reset_sources); - -/* Resets clock rates and reboots the system. Only called from system.h */ -void omap_prcm_restart(char mode, const char *cmd) -{ - s16 prcm_offs = 0; - - if (cpu_is_omap24xx()) { - omap2xxx_clk_prepare_for_reboot(); - - prcm_offs = WKUP_MOD; - } else if (cpu_is_omap34xx()) { - prcm_offs = OMAP3430_GR_MOD; - omap3_ctrl_write_boot_mode((cmd ? (u8)*cmd : 0)); - } else if (cpu_is_omap44xx()) { - omap4_prminst_global_warm_sw_reset(); /* never returns */ - } else { - WARN_ON(1); - } - - /* - * As per Errata i520, in some cases, user will not be able to - * access DDR memory after warm-reset. - * This situation occurs while the warm-reset happens during a read - * access to DDR memory. In that particular condition, DDR memory - * does not respond to a corrupted read command due to the warm - * reset occurrence but SDRC is waiting for read completion. - * SDRC is not sensitive to the warm reset, but the interconnect is - * reset on the fly, thus causing a misalignment between SDRC logic, - * interconnect logic and DDR memory state. - * WORKAROUND: - * Steps to perform before a Warm reset is trigged: - * 1. enable self-refresh on idle request - * 2. put SDRC in idle - * 3. wait until SDRC goes to idle - * 4. generate SW reset (Global SW reset) - * - * Steps to be performed after warm reset occurs (in bootloader): - * if HW warm reset is the source, apply below steps before any - * accesses to SDRAM: - * 1. Reset SMS and SDRC and wait till reset is complete - * 2. Re-initialize SMS, SDRC and memory - * - * NOTE: Above work around is required only if arch reset is implemented - * using Global SW reset(GLOBAL_SW_RST). DPLL3 reset does not need - * the WA since it resets SDRC as well as part of cold reset. - */ - - /* XXX should be moved to some OMAP2/3 specific code */ - omap2_prm_set_mod_reg_bits(OMAP_RST_DPLL3_MASK, prcm_offs, - OMAP2_RM_RSTCTRL); - omap2_prm_read_mod_reg(prcm_offs, OMAP2_RM_RSTCTRL); /* OCP barrier */ -} - -/** - * omap2_cm_wait_idlest - wait for IDLEST bit to indicate module readiness - * @reg: physical address of module IDLEST register - * @mask: value to mask against to determine if the module is active - * @idlest: idle state indicator (0 or 1) for the clock - * @name: name of the clock (for printk) - * - * Returns 1 if the module indicated readiness in time, or 0 if it - * failed to enable in roughly MAX_MODULE_ENABLE_WAIT microseconds. - * - * XXX This function is deprecated. It should be removed once the - * hwmod conversion is complete. - */ -int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, u8 idlest, - const char *name) -{ - int i = 0; - int ena = 0; - - if (idlest) - ena = 0; - else - ena = mask; - - /* Wait for lock */ - omap_test_timeout(((__raw_readl(reg) & mask) == ena), - MAX_MODULE_ENABLE_WAIT, i); - - if (i < MAX_MODULE_ENABLE_WAIT) - pr_debug("cm: Module associated with clock %s ready after %d loops\n", - name, i); - else - pr_err("cm: Module associated with clock %s didn't enable in %d tries\n", - name, MAX_MODULE_ENABLE_WAIT); - - return (i < MAX_MODULE_ENABLE_WAIT) ? 1 : 0; -}; - -void __init omap2_set_globals_prcm(struct omap_globals *omap2_globals) -{ - if (omap2_globals->prm) - prm_base = omap2_globals->prm; - if (omap2_globals->cm) - cm_base = omap2_globals->cm; - if (omap2_globals->cm2) - cm2_base = omap2_globals->cm2; - if (omap2_globals->prcm_mpu) - prcm_mpu_base = omap2_globals->prcm_mpu; - - if (cpu_is_omap44xx() || soc_is_omap54xx()) { - omap_prm_base_init(); - omap_cm_base_init(); - } -} - -/* - * Stubbed functions so that common files continue to build when - * custom builds are used - * XXX These are temporary and should be removed at the earliest possible - * opportunity - */ -int __weak omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs, - u16 clkctrl_offs) -{ - return 0; -} - -void __weak omap4_cminst_module_enable(u8 mode, u8 part, u16 inst, - s16 cdoffs, u16 clkctrl_offs) -{ -} - -void __weak omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs, - u16 clkctrl_offs) -{ -} |