diff options
Diffstat (limited to 'arch/arm/mach-orion')
| -rw-r--r-- | arch/arm/mach-orion/Kconfig | 41 | ||||
| -rw-r--r-- | arch/arm/mach-orion/Makefile | 6 | ||||
| -rw-r--r-- | arch/arm/mach-orion/Makefile.boot | 3 | ||||
| -rw-r--r-- | arch/arm/mach-orion/addr-map.c | 490 | ||||
| -rw-r--r-- | arch/arm/mach-orion/common.c | 369 | ||||
| -rw-r--r-- | arch/arm/mach-orion/common.h | 92 | ||||
| -rw-r--r-- | arch/arm/mach-orion/db88f5281-setup.c | 364 | ||||
| -rw-r--r-- | arch/arm/mach-orion/dns323-setup.c | 323 | ||||
| -rw-r--r-- | arch/arm/mach-orion/gpio.c | 225 | ||||
| -rw-r--r-- | arch/arm/mach-orion/irq.c | 241 | ||||
| -rw-r--r-- | arch/arm/mach-orion/kurobox_pro-setup.c | 244 | ||||
| -rw-r--r-- | arch/arm/mach-orion/pci.c | 557 | ||||
| -rw-r--r-- | arch/arm/mach-orion/rd88f5182-setup.c | 315 | ||||
| -rw-r--r-- | arch/arm/mach-orion/time.c | 181 | ||||
| -rw-r--r-- | arch/arm/mach-orion/ts209-setup.c | 361 |
15 files changed, 0 insertions, 3812 deletions
diff --git a/arch/arm/mach-orion/Kconfig b/arch/arm/mach-orion/Kconfig deleted file mode 100644 index 1dcbb6ac5a30..000000000000 --- a/arch/arm/mach-orion/Kconfig +++ /dev/null @@ -1,41 +0,0 @@ -if ARCH_ORION - -menu "Orion Implementations" - -config MACH_DB88F5281 - bool "Marvell Orion-2 Development Board" - select I2C_BOARDINFO - help - Say 'Y' here if you want your kernel to support the - Marvell Orion-2 (88F5281) Development Board - -config MACH_RD88F5182 - bool "Marvell Orion-NAS Reference Design" - select I2C_BOARDINFO - help - Say 'Y' here if you want your kernel to support the - Marvell Orion-NAS (88F5182) RD2 - -config MACH_KUROBOX_PRO - bool "KuroBox Pro" - select I2C_BOARDINFO - help - Say 'Y' here if you want your kernel to support the - KuroBox Pro platform. - -config MACH_DNS323 - bool "D-Link DNS-323" - select I2C_BOARDINFO - help - Say 'Y' here if you want your kernel to support the - D-Link DNS-323 platform. - -config MACH_TS209 - bool "QNAP TS-109/TS-209" - help - Say 'Y' here if you want your kernel to support the - QNAP TS-109/TS-209 platform. - -endmenu - -endif diff --git a/arch/arm/mach-orion/Makefile b/arch/arm/mach-orion/Makefile deleted file mode 100644 index f91d937a73e8..000000000000 --- a/arch/arm/mach-orion/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -obj-y += common.o addr-map.o pci.o gpio.o irq.o time.o -obj-$(CONFIG_MACH_DB88F5281) += db88f5281-setup.o -obj-$(CONFIG_MACH_RD88F5182) += rd88f5182-setup.o -obj-$(CONFIG_MACH_KUROBOX_PRO) += kurobox_pro-setup.o -obj-$(CONFIG_MACH_DNS323) += dns323-setup.o -obj-$(CONFIG_MACH_TS209) += ts209-setup.o diff --git a/arch/arm/mach-orion/Makefile.boot b/arch/arm/mach-orion/Makefile.boot deleted file mode 100644 index 67039c3e0c48..000000000000 --- a/arch/arm/mach-orion/Makefile.boot +++ /dev/null @@ -1,3 +0,0 @@ - zreladdr-y := 0x00008000 -params_phys-y := 0x00000100 -initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-orion/addr-map.c b/arch/arm/mach-orion/addr-map.c deleted file mode 100644 index 58cc3c0333b6..000000000000 --- a/arch/arm/mach-orion/addr-map.c +++ /dev/null @@ -1,490 +0,0 @@ -/* - * arch/arm/mach-orion/addr-map.c - * - * Address map functions for Marvell Orion System On Chip - * - * Maintainer: Tzachi Perelstein <tzachi@marvell.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <asm/hardware.h> -#include "common.h" - -/* - * The Orion has fully programable address map. There's a separate address - * map for each of the device _master_ interfaces, e.g. CPU, PCI, PCIE, USB, - * Gigabit Ethernet, DMA/XOR engines, etc. Each interface has its own - * address decode windows that allow it to access any of the Orion resources. - * - * CPU address decoding -- - * Linux assumes that it is the boot loader that already setup the access to - * DDR and internal registers. - * Setup access to PCI and PCI-E IO/MEM space is issued by core.c. - * Setup access to various devices located on the device bus interface (e.g. - * flashes, RTC, etc) should be issued by machine-setup.c according to - * specific board population (by using orion_setup_cpu_win()). - * - * Non-CPU Masters address decoding -- - * Unlike the CPU, we setup the access from Orion's master interfaces to DDR - * banks only (the typical use case). - * Setup access for each master to DDR is issued by common.c. - * - * Note: although orion_setbits() and orion_clrbits() are not atomic - * no locking is necessary here since code in this file is only called - * at boot time when there is no concurrency issues. - */ - -/* - * Generic Address Decode Windows bit settings - */ -#define TARGET_DDR 0 -#define TARGET_PCI 3 -#define TARGET_PCIE 4 -#define TARGET_DEV_BUS 1 -#define ATTR_DDR_CS(n) (((n) ==0) ? 0xe : \ - ((n) == 1) ? 0xd : \ - ((n) == 2) ? 0xb : \ - ((n) == 3) ? 0x7 : 0xf) -#define ATTR_PCIE_MEM 0x59 -#define ATTR_PCIE_IO 0x51 -#define ATTR_PCI_MEM 0x59 -#define ATTR_PCI_IO 0x51 -#define ATTR_DEV_CS0 0x1e -#define ATTR_DEV_CS1 0x1d -#define ATTR_DEV_CS2 0x1b -#define ATTR_DEV_BOOT 0xf -#define WIN_EN 1 - -/* - * Helpers to get DDR banks info - */ -#define DDR_BASE_CS(n) ORION_DDR_REG(0x1500 + ((n) * 8)) -#define DDR_SIZE_CS(n) ORION_DDR_REG(0x1504 + ((n) * 8)) -#define DDR_MAX_CS 4 -#define DDR_REG_TO_SIZE(reg) (((reg) | 0xffffff) + 1) -#define DDR_REG_TO_BASE(reg) ((reg) & 0xff000000) -#define DDR_BANK_EN 1 - -/* - * CPU Address Decode Windows registers - */ -#define CPU_WIN_CTRL(n) ORION_BRIDGE_REG(0x000 | ((n) << 4)) -#define CPU_WIN_BASE(n) ORION_BRIDGE_REG(0x004 | ((n) << 4)) -#define CPU_WIN_REMAP_LO(n) ORION_BRIDGE_REG(0x008 | ((n) << 4)) -#define CPU_WIN_REMAP_HI(n) ORION_BRIDGE_REG(0x00c | ((n) << 4)) -#define CPU_MAX_WIN 8 - -/* - * Use this CPU address decode windows allocation - */ -#define CPU_WIN_PCIE_IO 0 -#define CPU_WIN_PCI_IO 1 -#define CPU_WIN_PCIE_MEM 2 -#define CPU_WIN_PCI_MEM 3 -#define CPU_WIN_DEV_BOOT 4 -#define CPU_WIN_DEV_CS0 5 -#define CPU_WIN_DEV_CS1 6 -#define CPU_WIN_DEV_CS2 7 - -/* - * PCIE Address Decode Windows registers - */ -#define PCIE_BAR_CTRL(n) ORION_PCIE_REG(0x1804 + ((n - 1) * 4)) -#define PCIE_BAR_LO(n) ORION_PCIE_REG(0x0010 + ((n) * 8)) -#define PCIE_BAR_HI(n) ORION_PCIE_REG(0x0014 + ((n) * 8)) -#define PCIE_WIN_CTRL(n) (((n) < 5) ? \ - ORION_PCIE_REG(0x1820 + ((n) << 4)) : \ - ORION_PCIE_REG(0x1880)) -#define PCIE_WIN_BASE(n) (((n) < 5) ? \ - ORION_PCIE_REG(0x1824 + ((n) << 4)) : \ - ORION_PCIE_REG(0x1884)) -#define PCIE_WIN_REMAP(n) (((n) < 5) ? \ - ORION_PCIE_REG(0x182c + ((n) << 4)) : \ - ORION_PCIE_REG(0x188c)) -#define PCIE_DEFWIN_CTRL ORION_PCIE_REG(0x18b0) -#define PCIE_EXPROM_WIN_CTRL ORION_PCIE_REG(0x18c0) -#define PCIE_EXPROM_WIN_REMP ORION_PCIE_REG(0x18c4) -#define PCIE_MAX_BARS 3 -#define PCIE_MAX_WINS 6 - -/* - * Use PCIE BAR '1' for all DDR banks - */ -#define PCIE_DRAM_BAR 1 - -/* - * PCI Address Decode Windows registers - */ -#define PCI_BAR_SIZE_DDR_CS(n) (((n) == 0) ? ORION_PCI_REG(0xc08) : \ - ((n) == 1) ? ORION_PCI_REG(0xd08) : \ - ((n) == 2) ? ORION_PCI_REG(0xc0c) : \ - ((n) == 3) ? ORION_PCI_REG(0xd0c) : 0) -#define PCI_BAR_REMAP_DDR_CS(n) (((n) ==0) ? ORION_PCI_REG(0xc48) : \ - ((n) == 1) ? ORION_PCI_REG(0xd48) : \ - ((n) == 2) ? ORION_PCI_REG(0xc4c) : \ - ((n) == 3) ? ORION_PCI_REG(0xd4c) : 0) -#define PCI_BAR_ENABLE ORION_PCI_REG(0xc3c) -#define PCI_CTRL_BASE_LO(n) ORION_PCI_REG(0x1e00 | ((n) << 4)) -#define PCI_CTRL_BASE_HI(n) ORION_PCI_REG(0x1e04 | ((n) << 4)) -#define PCI_CTRL_SIZE(n) ORION_PCI_REG(0x1e08 | ((n) << 4)) -#define PCI_ADDR_DECODE_CTRL ORION_PCI_REG(0xd3c) - -/* - * PCI configuration heleprs for BAR settings - */ -#define PCI_CONF_FUNC_BAR_CS(n) ((n) >> 1) -#define PCI_CONF_REG_BAR_LO_CS(n) (((n) & 1) ? 0x18 : 0x10) -#define PCI_CONF_REG_BAR_HI_CS(n) (((n) & 1) ? 0x1c : 0x14) - -/* - * Gigabit Ethernet Address Decode Windows registers - */ -#define ETH_WIN_BASE(win) ORION_ETH_REG(0x200 + ((win) * 8)) -#define ETH_WIN_SIZE(win) ORION_ETH_REG(0x204 + ((win) * 8)) -#define ETH_WIN_REMAP(win) ORION_ETH_REG(0x280 + ((win) * 4)) -#define ETH_WIN_EN ORION_ETH_REG(0x290) -#define ETH_WIN_PROT ORION_ETH_REG(0x294) -#define ETH_MAX_WIN 6 -#define ETH_MAX_REMAP_WIN 4 - -/* - * USB Address Decode Windows registers - */ -#define USB_WIN_CTRL(i, w) ((i == 0) ? ORION_USB0_REG(0x320 + ((w) << 4)) \ - : ORION_USB1_REG(0x320 + ((w) << 4))) -#define USB_WIN_BASE(i, w) ((i == 0) ? ORION_USB0_REG(0x324 + ((w) << 4)) \ - : ORION_USB1_REG(0x324 + ((w) << 4))) -#define USB_MAX_WIN 4 - -/* - * SATA Address Decode Windows registers - */ -#define SATA_WIN_CTRL(win) ORION_SATA_REG(0x30 + ((win) * 0x10)) -#define SATA_WIN_BASE(win) ORION_SATA_REG(0x34 + ((win) * 0x10)) -#define SATA_MAX_WIN 4 - -static int __init orion_cpu_win_can_remap(u32 win) -{ - u32 dev, rev; - - orion_pcie_id(&dev, &rev); - if ((dev == MV88F5281_DEV_ID && win < 4) - || (dev == MV88F5182_DEV_ID && win < 2) - || (dev == MV88F5181_DEV_ID && win < 2)) - return 1; - - return 0; -} - -void __init orion_setup_cpu_win(enum orion_target target, u32 base, u32 size, int remap) -{ - u32 win, attr, ctrl; - - switch (target) { - case ORION_PCIE_IO: - target = TARGET_PCIE; - attr = ATTR_PCIE_IO; - win = CPU_WIN_PCIE_IO; - break; - case ORION_PCI_IO: - target = TARGET_PCI; - attr = ATTR_PCI_IO; - win = CPU_WIN_PCI_IO; - break; - case ORION_PCIE_MEM: - target = TARGET_PCIE; - attr = ATTR_PCIE_MEM; - win = CPU_WIN_PCIE_MEM; - break; - case ORION_PCI_MEM: - target = TARGET_PCI; - attr = ATTR_PCI_MEM; - win = CPU_WIN_PCI_MEM; - break; - case ORION_DEV_BOOT: - target = TARGET_DEV_BUS; - attr = ATTR_DEV_BOOT; - win = CPU_WIN_DEV_BOOT; - break; - case ORION_DEV0: - target = TARGET_DEV_BUS; - attr = ATTR_DEV_CS0; - win = CPU_WIN_DEV_CS0; - break; - case ORION_DEV1: - target = TARGET_DEV_BUS; - attr = ATTR_DEV_CS1; - win = CPU_WIN_DEV_CS1; - break; - case ORION_DEV2: - target = TARGET_DEV_BUS; - attr = ATTR_DEV_CS2; - win = CPU_WIN_DEV_CS2; - break; - case ORION_DDR: - case ORION_REGS: - /* - * Must be mapped by bootloader. - */ - default: - target = attr = win = -1; - BUG(); - } - - base &= 0xffff0000; - ctrl = (((size - 1) & 0xffff0000) | (attr << 8) | - (target << 4) | WIN_EN); - - orion_write(CPU_WIN_BASE(win), base); - orion_write(CPU_WIN_CTRL(win), ctrl); - - if (orion_cpu_win_can_remap(win)) { - if (remap >= 0) { - orion_write(CPU_WIN_REMAP_LO(win), remap & 0xffff0000); - orion_write(CPU_WIN_REMAP_HI(win), 0); - } else { - orion_write(CPU_WIN_REMAP_LO(win), base); - orion_write(CPU_WIN_REMAP_HI(win), 0); - } - } -} - -void __init orion_setup_cpu_wins(void) -{ - int i; - - /* - * First, disable and clear windows - */ - for (i = 0; i < CPU_MAX_WIN; i++) { - orion_write(CPU_WIN_BASE(i), 0); - orion_write(CPU_WIN_CTRL(i), 0); - if (orion_cpu_win_can_remap(i)) { - orion_write(CPU_WIN_REMAP_LO(i), 0); - orion_write(CPU_WIN_REMAP_HI(i), 0); - } - } - - /* - * Setup windows for PCI+PCIe IO+MEM space. - */ - orion_setup_cpu_win(ORION_PCIE_IO, ORION_PCIE_IO_PHYS_BASE, - ORION_PCIE_IO_SIZE, ORION_PCIE_IO_BUS_BASE); - orion_setup_cpu_win(ORION_PCI_IO, ORION_PCI_IO_PHYS_BASE, - ORION_PCI_IO_SIZE, ORION_PCI_IO_BUS_BASE); - orion_setup_cpu_win(ORION_PCIE_MEM, ORION_PCIE_MEM_PHYS_BASE, - ORION_PCIE_MEM_SIZE, -1); - orion_setup_cpu_win(ORION_PCI_MEM, ORION_PCI_MEM_PHYS_BASE, - ORION_PCI_MEM_SIZE, -1); -} - -/* - * Setup PCIE BARs and Address Decode Wins: - * BAR[0,2] -> disabled, BAR[1] -> covers all DRAM banks - * WIN[0-3] -> DRAM bank[0-3] - */ -void __init orion_setup_pcie_wins(void) -{ - u32 base, size, i; - - /* - * First, disable and clear BARs and windows - */ - for (i = 1; i < PCIE_MAX_BARS; i++) { - orion_write(PCIE_BAR_CTRL(i), 0); - orion_write(PCIE_BAR_LO(i), 0); - orion_write(PCIE_BAR_HI(i), 0); - } - - for (i = 0; i < PCIE_MAX_WINS; i++) { - orion_write(PCIE_WIN_CTRL(i), 0); - orion_write(PCIE_WIN_BASE(i), 0); - orion_write(PCIE_WIN_REMAP(i), 0); - } - - /* - * Setup windows for DDR banks. Count total DDR size on the fly. - */ - base = DDR_REG_TO_BASE(orion_read(DDR_BASE_CS(0))); - size = 0; - for (i = 0; i < DDR_MAX_CS; i++) { - u32 bank_base, bank_size; - bank_size = orion_read(DDR_SIZE_CS(i)); - bank_base = orion_read(DDR_BASE_CS(i)); - if (bank_size & DDR_BANK_EN) { - bank_size = DDR_REG_TO_SIZE(bank_size); - bank_base = DDR_REG_TO_BASE(bank_base); - orion_write(PCIE_WIN_BASE(i), bank_base & 0xffff0000); - orion_write(PCIE_WIN_REMAP(i), 0); - orion_write(PCIE_WIN_CTRL(i), - ((bank_size-1) & 0xffff0000) | - (ATTR_DDR_CS(i) << 8) | - (TARGET_DDR << 4) | - (PCIE_DRAM_BAR << 1) | WIN_EN); - size += bank_size; - } - } - - /* - * Setup BAR[1] to all DRAM banks - */ - orion_write(PCIE_BAR_LO(PCIE_DRAM_BAR), base & 0xffff0000); - orion_write(PCIE_BAR_HI(PCIE_DRAM_BAR), 0); - orion_write(PCIE_BAR_CTRL(PCIE_DRAM_BAR), - ((size - 1) & 0xffff0000) | WIN_EN); -} - -void __init orion_setup_pci_wins(void) -{ - u32 base, size, i; - - /* - * First, disable windows - */ - orion_write(PCI_BAR_ENABLE, 0xffffffff); - - /* - * Setup windows for DDR banks. - */ - for (i = 0; i < DDR_MAX_CS; i++) { - base = orion_read(DDR_BASE_CS(i)); - size = orion_read(DDR_SIZE_CS(i)); - if (size & DDR_BANK_EN) { - u32 bus, dev, func, reg, val; - size = DDR_REG_TO_SIZE(size); - base = DDR_REG_TO_BASE(base); - bus = orion_pci_local_bus_nr(); - dev = orion_pci_local_dev_nr(); - func = PCI_CONF_FUNC_BAR_CS(i); - reg = PCI_CONF_REG_BAR_LO_CS(i); - orion_pci_hw_rd_conf(bus, dev, func, reg, 4, &val); - orion_pci_hw_wr_conf(bus, dev, func, reg, 4, - (base & 0xfffff000) | (val & 0xfff)); - reg = PCI_CONF_REG_BAR_HI_CS(i); - orion_pci_hw_wr_conf(bus, dev, func, reg, 4, 0); - orion_write(PCI_BAR_SIZE_DDR_CS(i), - (size - 1) & 0xfffff000); - orion_write(PCI_BAR_REMAP_DDR_CS(i), - base & 0xfffff000); - orion_clrbits(PCI_BAR_ENABLE, (1 << i)); - } - } - - /* - * Disable automatic update of address remaping when writing to BARs - */ - orion_setbits(PCI_ADDR_DECODE_CTRL, 1); -} - -void __init orion_setup_usb_wins(void) -{ - int i; - u32 usb_if, dev, rev; - u32 max_usb_if = 1; - - orion_pcie_id(&dev, &rev); - if (dev == MV88F5182_DEV_ID) - max_usb_if = 2; - - for (usb_if = 0; usb_if < max_usb_if; usb_if++) { - /* - * First, disable and clear windows - */ - for (i = 0; i < USB_MAX_WIN; i++) { - orion_write(USB_WIN_BASE(usb_if, i), 0); - orion_write(USB_WIN_CTRL(usb_if, i), 0); - } - - /* - * Setup windows for DDR banks. - */ - for (i = 0; i < DDR_MAX_CS; i++) { - u32 base, size; - size = orion_read(DDR_SIZE_CS(i)); - base = orion_read(DDR_BASE_CS(i)); - if (size & DDR_BANK_EN) { - base = DDR_REG_TO_BASE(base); - size = DDR_REG_TO_SIZE(size); - orion_write(USB_WIN_CTRL(usb_if, i), - ((size-1) & 0xffff0000) | - (ATTR_DDR_CS(i) << 8) | - (TARGET_DDR << 4) | WIN_EN); - orion_write(USB_WIN_BASE(usb_if, i), - base & 0xffff0000); - } - } - } -} - -void __init orion_setup_eth_wins(void) -{ - int i; - - /* - * First, disable and clear windows - */ - for (i = 0; i < ETH_MAX_WIN; i++) { - orion_write(ETH_WIN_BASE(i), 0); - orion_write(ETH_WIN_SIZE(i), 0); - orion_setbits(ETH_WIN_EN, 1 << i); - orion_clrbits(ETH_WIN_PROT, 0x3 << (i * 2)); - if (i < ETH_MAX_REMAP_WIN) - orion_write(ETH_WIN_REMAP(i), 0); - } - - /* - * Setup windows for DDR banks. - */ - for (i = 0; i < DDR_MAX_CS; i++) { - u32 base, size; - size = orion_read(DDR_SIZE_CS(i)); - base = orion_read(DDR_BASE_CS(i)); - if (size & DDR_BANK_EN) { - base = DDR_REG_TO_BASE(base); - size = DDR_REG_TO_SIZE(size); - orion_write(ETH_WIN_SIZE(i), (size-1) & 0xffff0000); - orion_write(ETH_WIN_BASE(i), (base & 0xffff0000) | - (ATTR_DDR_CS(i) << 8) | - TARGET_DDR); - orion_clrbits(ETH_WIN_EN, 1 << i); - orion_setbits(ETH_WIN_PROT, 0x3 << (i * 2)); - } - } -} - -void __init orion_setup_sata_wins(void) -{ - int i; - - /* - * First, disable and clear windows - */ - for (i = 0; i < SATA_MAX_WIN; i++) { - orion_write(SATA_WIN_BASE(i), 0); - orion_write(SATA_WIN_CTRL(i), 0); - } - - /* - * Setup windows for DDR banks. - */ - for (i = 0; i < DDR_MAX_CS; i++) { - u32 base, size; - size = orion_read(DDR_SIZE_CS(i)); - base = orion_read(DDR_BASE_CS(i)); - if (size & DDR_BANK_EN) { - base = DDR_REG_TO_BASE(base); - size = DDR_REG_TO_SIZE(size); - orion_write(SATA_WIN_CTRL(i), - ((size-1) & 0xffff0000) | - (ATTR_DDR_CS(i) << 8) | - (TARGET_DDR << 4) | WIN_EN); - orion_write(SATA_WIN_BASE(i), - base & 0xffff0000); - } - } -} diff --git a/arch/arm/mach-orion/common.c b/arch/arm/mach-orion/common.c deleted file mode 100644 index bbc2b4ec932c..000000000000 --- a/arch/arm/mach-orion/common.c +++ /dev/null @@ -1,369 +0,0 @@ -/* - * arch/arm/mach-orion/common.c - * - * Core functions for Marvell Orion System On Chip - * - * Maintainer: Tzachi Perelstein <tzachi@marvell.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/serial_8250.h> -#include <linux/mv643xx_eth.h> -#include <linux/mv643xx_i2c.h> -#include <asm/page.h> -#include <asm/setup.h> -#include <asm/timex.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/arch/hardware.h> -#include "common.h" - -/***************************************************************************** - * I/O Address Mapping - ****************************************************************************/ -static struct map_desc orion_io_desc[] __initdata = { - { - .virtual = ORION_REGS_VIRT_BASE, - .pfn = __phys_to_pfn(ORION_REGS_PHYS_BASE), - .length = ORION_REGS_SIZE, - .type = MT_DEVICE - }, - { - .virtual = ORION_PCIE_IO_VIRT_BASE, - .pfn = __phys_to_pfn(ORION_PCIE_IO_PHYS_BASE), - .length = ORION_PCIE_IO_SIZE, - .type = MT_DEVICE - }, - { - .virtual = ORION_PCI_IO_VIRT_BASE, - .pfn = __phys_to_pfn(ORION_PCI_IO_PHYS_BASE), - .length = ORION_PCI_IO_SIZE, - .type = MT_DEVICE - }, - { - .virtual = ORION_PCIE_WA_VIRT_BASE, - .pfn = __phys_to_pfn(ORION_PCIE_WA_PHYS_BASE), - .length = ORION_PCIE_WA_SIZE, - .type = MT_DEVICE - }, -}; - -void __init orion_map_io(void) -{ - iotable_init(orion_io_desc, ARRAY_SIZE(orion_io_desc)); -} - -/***************************************************************************** - * UART - ****************************************************************************/ - -static struct resource orion_uart_resources[] = { - { - .start = UART0_PHYS_BASE, - .end = UART0_PHYS_BASE + 0xff, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_ORION_UART0, - .end = IRQ_ORION_UART0, - .flags = IORESOURCE_IRQ, - }, - { - .start = UART1_PHYS_BASE, - .end = UART1_PHYS_BASE + 0xff, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_ORION_UART1, - .end = IRQ_ORION_UART1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct plat_serial8250_port orion_uart_data[] = { - { - .mapbase = UART0_PHYS_BASE, - .membase = (char *)UART0_VIRT_BASE, - .irq = IRQ_ORION_UART0, - .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = ORION_TCLK, - }, - { - .mapbase = UART1_PHYS_BASE, - .membase = (char *)UART1_VIRT_BASE, - .irq = IRQ_ORION_UART1, - .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = ORION_TCLK, - }, - { }, -}; - -static struct platform_device orion_uart = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = orion_uart_data, - }, - .resource = orion_uart_resources, - .num_resources = ARRAY_SIZE(orion_uart_resources), -}; - -/******************************************************************************* - * USB Controller - 2 interfaces - ******************************************************************************/ - -static struct resource orion_ehci0_resources[] = { - { - .start = ORION_USB0_PHYS_BASE, - .end = ORION_USB0_PHYS_BASE + SZ_4K, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_ORION_USB0_CTRL, - .end = IRQ_ORION_USB0_CTRL, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource orion_ehci1_resources[] = { - { - .start = ORION_USB1_PHYS_BASE, - .end = ORION_USB1_PHYS_BASE + SZ_4K, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_ORION_USB1_CTRL, - .end = IRQ_ORION_USB1_CTRL, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 ehci_dmamask = 0xffffffffUL; - -static struct platform_device orion_ehci0 = { - .name = "orion-ehci", - .id = 0, - .dev = { - .dma_mask = &ehci_dmamask, - .coherent_dma_mask = 0xffffffff, - }, - .resource = orion_ehci0_resources, - .num_resources = ARRAY_SIZE(orion_ehci0_resources), -}; - -static struct platform_device orion_ehci1 = { - .name = "orion-ehci", - .id = 1, - .dev = { - .dma_mask = &ehci_dmamask, - .coherent_dma_mask = 0xffffffff, - }, - .resource = orion_ehci1_resources, - .num_resources = ARRAY_SIZE(orion_ehci1_resources), -}; - -/***************************************************************************** - * Gigabit Ethernet port - * (The Orion and Discovery (MV643xx) families use the same Ethernet driver) - ****************************************************************************/ - -static struct resource orion_eth_shared_resources[] = { - { - .start = ORION_ETH_PHYS_BASE + 0x2000, - .end = ORION_ETH_PHYS_BASE + 0x3fff, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device orion_eth_shared = { - .name = MV643XX_ETH_SHARED_NAME, - .id = 0, - .num_resources = 1, - .resource = orion_eth_shared_resources, -}; - -static struct resource orion_eth_resources[] = { - { - .name = "eth irq", - .start = IRQ_ORION_ETH_SUM, - .end = IRQ_ORION_ETH_SUM, - .flags = IORESOURCE_IRQ, - } -}; - -static struct platform_device orion_eth = { - .name = MV643XX_ETH_NAME, - .id = 0, - .num_resources = 1, - .resource = orion_eth_resources, -}; - -void __init orion_eth_init(struct mv643xx_eth_platform_data *eth_data) -{ - orion_eth.dev.platform_data = eth_data; - platform_device_register(&orion_eth_shared); - platform_device_register(&orion_eth); -} - -/***************************************************************************** - * I2C controller - * (The Orion and Discovery (MV643xx) families share the same I2C controller) - ****************************************************************************/ - -static struct mv64xxx_i2c_pdata orion_i2c_pdata = { - .freq_m = 8, /* assumes 166 MHz TCLK */ - .freq_n = 3, - .timeout = 1000, /* Default timeout of 1 second */ -}; - -static struct resource orion_i2c_resources[] = { - { - .name = "i2c base", - .start = I2C_PHYS_BASE, - .end = I2C_PHYS_BASE + 0x20 -1, - .flags = IORESOURCE_MEM, - }, - { - .name = "i2c irq", - .start = IRQ_ORION_I2C, - .end = IRQ_ORION_I2C, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device orion_i2c = { - .name = MV64XXX_I2C_CTLR_NAME, - .id = 0, - .num_resources = ARRAY_SIZE(orion_i2c_resources), - .resource = orion_i2c_resources, - .dev = { - .platform_data = &orion_i2c_pdata, - }, -}; - -/***************************************************************************** - * Sata port - ****************************************************************************/ -static struct resource orion_sata_resources[] = { - { - .name = "sata base", - .start = ORION_SATA_PHYS_BASE, - .end = ORION_SATA_PHYS_BASE + 0x5000 - 1, - .flags = IORESOURCE_MEM, - }, - { - .name = "sata irq", - .start = IRQ_ORION_SATA, - .end = IRQ_ORION_SATA, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device orion_sata = { - .name = "sata_mv", - .id = 0, - .dev = { - .coherent_dma_mask = 0xffffffff, - }, - .num_resources = ARRAY_SIZE(orion_sata_resources), - .resource = orion_sata_resources, -}; - -void __init orion_sata_init(struct mv_sata_platform_data *sata_data) -{ - orion_sata.dev.platform_data = sata_data; - platform_device_register(&orion_sata); -} - -/***************************************************************************** - * General - ****************************************************************************/ - -/* - * Identify device ID and rev from PCIE configuration header space '0'. - */ -static void orion_id(u32 *dev, u32 *rev, char **dev_name) -{ - orion_pcie_id(dev, rev); - - if (*dev == MV88F5281_DEV_ID) { - if (*rev == MV88F5281_REV_D2) { - *dev_name = "MV88F5281-D2"; - } else if (*rev == MV88F5281_REV_D1) { - *dev_name = "MV88F5281-D1"; - } else { - *dev_name = "MV88F5281-Rev-Unsupported"; - } - } else if (*dev == MV88F5182_DEV_ID) { - if (*rev == MV88F5182_REV_A2) { - *dev_name = "MV88F5182-A2"; - } else { - *dev_name = "MV88F5182-Rev-Unsupported"; - } - } else if (*dev == MV88F5181_DEV_ID) { - if (*rev == MV88F5181_REV_B1) { - *dev_name = "MV88F5181-Rev-B1"; - } else { - *dev_name = "MV88F5181-Rev-Unsupported"; - } - } else { - *dev_name = "Device-Unknown"; - } -} - -void __init orion_init(void) -{ - char *dev_name; - u32 dev, rev; - - orion_id(&dev, &rev, &dev_name); - printk(KERN_INFO "Orion ID: %s. TCLK=%d.\n", dev_name, ORION_TCLK); - - /* - * Setup Orion address map - */ - orion_setup_cpu_wins(); - orion_setup_usb_wins(); - orion_setup_eth_wins(); - orion_setup_pci_wins(); - orion_setup_pcie_wins(); - if (dev == MV88F5182_DEV_ID) - orion_setup_sata_wins(); - - /* - * REgister devices - */ - platform_device_register(&orion_uart); - platform_device_register(&orion_ehci0); - if (dev == MV88F5182_DEV_ID) - platform_device_register(&orion_ehci1); - platform_device_register(&orion_i2c); -} - -/* - * Many orion-based systems have buggy bootloader implementations. - * This is a common fixup for bogus memory tags. - */ -void __init tag_fixup_mem32(struct machine_desc *mdesc, struct tag *t, - char **from, struct meminfo *meminfo) -{ - for (; t->hdr.size; t = tag_next(t)) - if (t->hdr.tag == ATAG_MEM && - (!t->u.mem.size || t->u.mem.size & ~PAGE_MASK || - t->u.mem.start & ~PAGE_MASK)) { - printk(KERN_WARNING - "Clearing invalid memory bank %dKB@0x%08x\n", - t->u.mem.size / 1024, t->u.mem.start); - t->hdr.tag = 0; - } -} diff --git a/arch/arm/mach-orion/common.h b/arch/arm/mach-orion/common.h deleted file mode 100644 index 501497cc2c4d..000000000000 --- a/arch/arm/mach-orion/common.h +++ /dev/null @@ -1,92 +0,0 @@ -#ifndef __ARCH_ORION_COMMON_H__ -#define __ARCH_ORION_COMMON_H__ - -/* - * Basic Orion init functions used early by machine-setup. - */ - -void __init orion_map_io(void); -void __init orion_init_irq(void); -void __init orion_init(void); - -/* - * Enumerations and functions for Orion windows mapping. Used by Orion core - * functions to map its interfaces and by the machine-setup to map its on- - * board devices. Details in /mach-orion/addr-map.c - */ - -enum orion_target { - ORION_DEV_BOOT = 0, - ORION_DEV0, - ORION_DEV1, - ORION_DEV2, - ORION_PCIE_MEM, - ORION_PCIE_IO, - ORION_PCI_MEM, - ORION_PCI_IO, - ORION_DDR, - ORION_REGS, - ORION_MAX_TARGETS -}; - -void orion_setup_cpu_win(enum orion_target target, u32 base, u32 size, int remap); -void orion_setup_cpu_wins(void); -void orion_setup_eth_wins(void); -void orion_setup_usb_wins(void); -void orion_setup_pci_wins(void); -void orion_setup_pcie_wins(void); -void orion_setup_sata_wins(void); - -/* - * Shared code used internally by other Orion core functions. - * (/mach-orion/pci.c) - */ - -struct pci_sys_data; -struct pci_bus; - -void orion_pcie_id(u32 *dev, u32 *rev); -u32 orion_pcie_local_bus_nr(void); -u32 orion_pci_local_bus_nr(void); -u32 orion_pci_local_dev_nr(void); -int orion_pci_sys_setup(int nr, struct pci_sys_data *sys); -struct pci_bus *orion_pci_sys_scan_bus(int nr, struct pci_sys_data *sys); -int orion_pci_hw_rd_conf(u32 bus, u32 dev, u32 func, u32 where, u32 size, u32 *val); -int orion_pci_hw_wr_conf(u32 bus, u32 dev, u32 func, u32 where, u32 size, u32 val); - -/* - * Valid GPIO pins according to MPP setup, used by machine-setup. - * (/mach-orion/gpio.c). - */ - -void __init orion_gpio_set_valid_pins(u32 pins); -void gpio_display(void); /* debug */ - -/* - * Orion system timer (clocksource + clockevnt, /mach-orion/time.c) - */ -extern struct sys_timer orion_timer; - -/* - * Pull in Orion Ethernet platform_data, used by machine-setup - */ - -struct mv643xx_eth_platform_data; - -void __init orion_eth_init(struct mv643xx_eth_platform_data *eth_data); - -/* - * Orion Sata platform_data, used by machine-setup - */ - -struct mv_sata_platform_data; - -void __init orion_sata_init(struct mv_sata_platform_data *sata_data); - -struct machine_desc; -struct meminfo; -struct tag; -extern void __init tag_fixup_mem32(struct machine_desc *, struct tag *, - char **, struct meminfo *); - -#endif /* __ARCH_ORION_COMMON_H__ */ diff --git a/arch/arm/mach-orion/db88f5281-setup.c b/arch/arm/mach-orion/db88f5281-setup.c deleted file mode 100644 index 5ef44e1a2d36..000000000000 --- a/arch/arm/mach-orion/db88f5281-setup.c +++ /dev/null @@ -1,364 +0,0 @@ -/* - * arch/arm/mach-orion/db88f5281-setup.c - * - * Marvell Orion-2 Development Board Setup - * - * Maintainer: Tzachi Perelstein <tzachi@marvell.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/pci.h> -#include <linux/irq.h> -#include <linux/mtd/physmap.h> -#include <linux/mtd/nand.h> -#include <linux/timer.h> -#include <linux/mv643xx_eth.h> -#include <linux/i2c.h> -#include <asm/mach-types.h> -#include <asm/gpio.h> -#include <asm/mach/arch.h> -#include <asm/mach/pci.h> -#include <asm/arch/orion.h> -#include <asm/arch/platform.h> -#include "common.h" - -/***************************************************************************** - * DB-88F5281 on board devices - ****************************************************************************/ - -/* - * 512K NOR flash Device bus boot chip select - */ - -#define DB88F5281_NOR_BOOT_BASE 0xf4000000 -#define DB88F5281_NOR_BOOT_SIZE SZ_512K - -/* - * 7-Segment on Device bus chip select 0 - */ - -#define DB88F5281_7SEG_BASE 0xfa000000 -#define DB88F5281_7SEG_SIZE SZ_1K - -/* - * 32M NOR flash on Device bus chip select 1 - */ - -#define DB88F5281_NOR_BASE 0xfc000000 -#define DB88F5281_NOR_SIZE SZ_32M - -/* - * 32M NAND flash on Device bus chip select 2 - */ - -#define DB88F5281_NAND_BASE 0xfa800000 -#define DB88F5281_NAND_SIZE SZ_1K - -/* - * PCI - */ - -#define DB88F5281_PCI_SLOT0_OFFS 7 -#define DB88F5281_PCI_SLOT0_IRQ_PIN 12 -#define DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN 13 - -/***************************************************************************** - * 512M NOR Flash on Device bus Boot CS - ****************************************************************************/ - -static struct physmap_flash_data db88f5281_boot_flash_data = { - .width = 1, /* 8 bit bus width */ -}; - -static struct resource db88f5281_boot_flash_resource = { - .flags = IORESOURCE_MEM, - .start = DB88F5281_NOR_BOOT_BASE, - .end = DB88F5281_NOR_BOOT_BASE + DB88F5281_NOR_BOOT_SIZE - 1, -}; - -static struct platform_device db88f5281_boot_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &db88f5281_boot_flash_data, - }, - .num_resources = 1, - .resource = &db88f5281_boot_flash_resource, -}; - -/***************************************************************************** - * 32M NOR Flash on Device bus CS1 - ****************************************************************************/ - -static struct physmap_flash_data db88f5281_nor_flash_data = { - .width = 4, /* 32 bit bus width */ -}; - -static struct resource db88f5281_nor_flash_resource = { - .flags = IORESOURCE_MEM, - .start = DB88F5281_NOR_BASE, - .end = DB88F5281_NOR_BASE + DB88F5281_NOR_SIZE - 1, -}; - -static struct platform_device db88f5281_nor_flash = { - .name = "physmap-flash", - .id = 1, - .dev = { - .platform_data = &db88f5281_nor_flash_data, - }, - .num_resources = 1, - .resource = &db88f5281_nor_flash_resource, -}; - -/***************************************************************************** - * 32M NAND Flash on Device bus CS2 - ****************************************************************************/ - -static struct mtd_partition db88f5281_nand_parts[] = { - { - .name = "kernel", - .offset = 0, - .size = SZ_2M, - }, - { - .name = "root", - .offset = SZ_2M, - .size = (SZ_16M - SZ_2M), - }, - { - .name = "user", - .offset = SZ_16M, - .size = SZ_8M, - }, - { - .name = "recovery", - .offset = (SZ_16M + SZ_8M), - .size = SZ_8M, - }, -}; - -static struct resource db88f5281_nand_resource = { - .flags = IORESOURCE_MEM, - .start = DB88F5281_NAND_BASE, - .end = DB88F5281_NAND_BASE + DB88F5281_NAND_SIZE - 1, -}; - -static struct orion_nand_data db88f5281_nand_data = { - .parts = db88f5281_nand_parts, - .nr_parts = ARRAY_SIZE(db88f5281_nand_parts), - .cle = 0, - .ale = 1, - .width = 8, -}; - -static struct platform_device db88f5281_nand_flash = { - .name = "orion_nand", - .id = -1, - .dev = { - .platform_data = &db88f5281_nand_data, - }, - .resource = &db88f5281_nand_resource, - .num_resources = 1, -}; - -/***************************************************************************** - * 7-Segment on Device bus CS0 - * Dummy counter every 2 sec - ****************************************************************************/ - -static void __iomem *db88f5281_7seg; -static struct timer_list db88f5281_timer; - -static void db88f5281_7seg_event(unsigned long data) -{ - static int count = 0; - writel(0, db88f5281_7seg + (count << 4)); - count = (count + 1) & 7; - mod_timer(&db88f5281_timer, jiffies + 2 * HZ); -} - -static int __init db88f5281_7seg_init(void) -{ - if (machine_is_db88f5281()) { - db88f5281_7seg = ioremap(DB88F5281_7SEG_BASE, - DB88F5281_7SEG_SIZE); - if (!db88f5281_7seg) { - printk(KERN_ERR "Failed to ioremap db88f5281_7seg\n"); - return -EIO; - } - setup_timer(&db88f5281_timer, db88f5281_7seg_event, 0); - mod_timer(&db88f5281_timer, jiffies + 2 * HZ); - } - - return 0; -} - -__initcall(db88f5281_7seg_init); - -/***************************************************************************** - * PCI - ****************************************************************************/ - -void __init db88f5281_pci_preinit(void) -{ - int pin; - - /* - * Configure PCI GPIO IRQ pins - */ - pin = DB88F5281_PCI_SLOT0_IRQ_PIN; - if (gpio_request(pin, "PCI Int1") == 0) { - if (gpio_direction_input(pin) == 0) { - set_irq_type(gpio_to_irq(pin), IRQT_LOW); - } else { - printk(KERN_ERR "db88f5281_pci_preinit faield to " - "set_irq_type pin %d\n", pin); - gpio_free(pin); - } - } else { - printk(KERN_ERR "db88f5281_pci_preinit failed to gpio_request %d\n", pin); - } - - pin = DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN; - if (gpio_request(pin, "PCI Int2") == 0) { - if (gpio_direction_input(pin) == 0) { - set_irq_type(gpio_to_irq(pin), IRQT_LOW); - } else { - printk(KERN_ERR "db88f5281_pci_preinit faield " - "to set_irq_type pin %d\n", pin); - gpio_free(pin); - } - } else { - printk(KERN_ERR "db88f5281_pci_preinit failed to gpio_request %d\n", pin); - } -} - -static int __init db88f5281_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) -{ - /* - * PCIE IRQ is connected internally (not GPIO) - */ - if (dev->bus->number == orion_pcie_local_bus_nr()) - return IRQ_ORION_PCIE0_INT; - - /* - * PCI IRQs are connected via GPIOs - */ - switch (slot - DB88F5281_PCI_SLOT0_OFFS) { - case 0: - return gpio_to_irq(DB88F5281_PCI_SLOT0_IRQ_PIN); - case 1: - case 2: - return gpio_to_irq(DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN); - default: - return -1; - } -} - -static struct hw_pci db88f5281_pci __initdata = { - .nr_controllers = 2, - .preinit = db88f5281_pci_preinit, - .swizzle = pci_std_swizzle, - .setup = orion_pci_sys_setup, - .scan = orion_pci_sys_scan_bus, - .map_irq = db88f5281_pci_map_irq, -}; - -static int __init db88f5281_pci_init(void) -{ - if (machine_is_db88f5281()) - pci_common_init(&db88f5281_pci); - - return 0; -} - -subsys_initcall(db88f5281_pci_init); - -/***************************************************************************** - * Ethernet - ****************************************************************************/ -static struct mv643xx_eth_platform_data db88f5281_eth_data = { - .phy_addr = 8, - .force_phy_addr = 1, -}; - -/***************************************************************************** - * RTC DS1339 on I2C bus - ****************************************************************************/ -static struct i2c_board_info __initdata db88f5281_i2c_rtc = { - .driver_name = "rtc-ds1307", - .type = "ds1339", - .addr = 0x68, -}; - -/***************************************************************************** - * General Setup - ****************************************************************************/ - -static struct platform_device *db88f5281_devs[] __initdata = { - &db88f5281_boot_flash, - &db88f5281_nor_flash, - &db88f5281_nand_flash, -}; - -static void __init db88f5281_init(void) -{ - /* - * Basic Orion setup. Need to be called early. - */ - orion_init(); - - /* - * Setup the CPU address decode windows for our on-board devices - */ - orion_setup_cpu_win(ORION_DEV_BOOT, DB88F5281_NOR_BOOT_BASE, - DB88F5281_NOR_BOOT_SIZE, -1); - orion_setup_cpu_win(ORION_DEV0, DB88F5281_7SEG_BASE, - DB88F5281_7SEG_SIZE, -1); - orion_setup_cpu_win(ORION_DEV1, DB88F5281_NOR_BASE, - DB88F5281_NOR_SIZE, -1); - orion_setup_cpu_win(ORION_DEV2, DB88F5281_NAND_BASE, - DB88F5281_NAND_SIZE, -1); - - /* - * Setup Multiplexing Pins: - * MPP0: GPIO (USB Over Current) MPP1: GPIO (USB Vbat input) - * MPP2: PCI_REQn[2] MPP3: PCI_GNTn[2] - * MPP4: PCI_REQn[3] MPP5: PCI_GNTn[3] - * MPP6: GPIO (JP0, CON17.2) MPP7: GPIO (JP1, CON17.1) - * MPP8: GPIO (JP2, CON11.2) MPP9: GPIO (JP3, CON11.3) - * MPP10: GPIO (RTC int) MPP11: GPIO (Baud Rate Generator) - * MPP12: GPIO (PCI int 1) MPP13: GPIO (PCI int 2) - * MPP14: NAND_REn[2] MPP15: NAND_WEn[2] - * MPP16: UART1_RX MPP17: UART1_TX - * MPP18: UART1_CTS MPP19: UART1_RTS - * MPP-DEV: DEV_D[16:31] - */ - orion_write(MPP_0_7_CTRL, 0x00222203); - orion_write(MPP_8_15_CTRL, 0x44000000); - orion_write(MPP_16_19_CTRL, 0); - orion_write(MPP_DEV_CTRL, 0); - - orion_gpio_set_valid_pins(0x00003fc3); - - platform_add_devices(db88f5281_devs, ARRAY_SIZE(db88f5281_devs)); - i2c_register_board_info(0, &db88f5281_i2c_rtc, 1); - orion_eth_init(&db88f5281_eth_data); -} - -MACHINE_START(DB88F5281, "Marvell Orion-2 Development Board") - /* Maintainer: Tzachi Perelstein <tzachi@marvell.com> */ - .phys_io = ORION_REGS_PHYS_BASE, - .io_pg_offst = ((ORION_REGS_VIRT_BASE) >> 18) & 0xfffc, - .boot_params = 0x00000100, - .init_machine = db88f5281_init, - .map_io = orion_map_io, - .init_irq = orion_init_irq, - .timer = &orion_timer, -MACHINE_END diff --git a/arch/arm/mach-orion/dns323-setup.c b/arch/arm/mach-orion/dns323-setup.c deleted file mode 100644 index 076e155ad510..000000000000 --- a/arch/arm/mach-orion/dns323-setup.c +++ /dev/null @@ -1,323 +0,0 @@ -/* - * arch/arm/mach-orion/dns323-setup.c - * - * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU Lesser General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/pci.h> -#include <linux/irq.h> -#include <linux/mtd/physmap.h> -#include <linux/mv643xx_eth.h> -#include <linux/leds.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> -#include <linux/i2c.h> -#include <asm/mach-types.h> -#include <asm/gpio.h> -#include <asm/mach/arch.h> -#include <asm/mach/pci.h> -#include <asm/arch/orion.h> -#include <asm/arch/platform.h> -#include "common.h" - -#define DNS323_GPIO_LED_RIGHT_AMBER 1 -#define DNS323_GPIO_LED_LEFT_AMBER 2 -#define DNS323_GPIO_LED_POWER 5 -#define DNS323_GPIO_OVERTEMP 6 -#define DNS323_GPIO_RTC 7 -#define DNS323_GPIO_POWER_OFF 8 -#define DNS323_GPIO_KEY_POWER 9 -#define DNS323_GPIO_KEY_RESET 10 - -/**************************************************************************** - * PCI setup - */ - -static int __init dns323_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) -{ - /* PCI-E */ - if (dev->bus->number == orion_pcie_local_bus_nr()) - return IRQ_ORION_PCIE0_INT; - - pr_err("%s: requested mapping for unknown bus\n", __func__); - - return -1; -} - -static struct hw_pci dns323_pci __initdata = { - .nr_controllers = 1, - .swizzle = pci_std_swizzle, - .setup = orion_pci_sys_setup, - .scan = orion_pci_sys_scan_bus, - .map_irq = dns323_pci_map_irq, -}; - -static int __init dns323_pci_init(void) -{ - if (machine_is_dns323()) - pci_common_init(&dns323_pci); - - return 0; -} - -subsys_initcall(dns323_pci_init); - -/**************************************************************************** - * Ethernet - */ - -static struct mv643xx_eth_platform_data dns323_eth_data = { - .phy_addr = 8, - .force_phy_addr = 1, -}; - -/**************************************************************************** - * 8MiB NOR flash (Spansion S29GL064M90TFIR4) - * - * Layout as used by D-Link: - * 0x00000000-0x00010000 : "MTD1" - * 0x00010000-0x00020000 : "MTD2" - * 0x00020000-0x001a0000 : "Linux Kernel" - * 0x001a0000-0x007d0000 : "File System" - * 0x007d0000-0x00800000 : "u-boot" - */ - -#define DNS323_NOR_BOOT_BASE 0xf4000000 -#define DNS323_NOR_BOOT_SIZE SZ_8M - -static struct mtd_partition dns323_partitions[] = { - { - .name = "MTD1", - .size = 0x00010000, - .offset = 0, - }, { - .name = "MTD2", - .size = 0x00010000, - .offset = 0x00010000, - }, { - .name = "Linux Kernel", - .size = 0x00180000, - .offset = 0x00020000, - }, { - .name = "File System", - .size = 0x00630000, - .offset = 0x001A0000, - }, { - .name = "u-boot", - .size = 0x00030000, - .offset = 0x007d0000, - } -}; - -static struct physmap_flash_data dns323_nor_flash_data = { - .width = 1, - .parts = dns323_partitions, - .nr_parts = ARRAY_SIZE(dns323_partitions) -}; - -static struct resource dns323_nor_flash_resource = { - .flags = IORESOURCE_MEM, - .start = DNS323_NOR_BOOT_BASE, - .end = DNS323_NOR_BOOT_BASE + DNS323_NOR_BOOT_SIZE - 1, -}; - -static struct platform_device dns323_nor_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { .platform_data = &dns323_nor_flash_data, }, - .resource = &dns323_nor_flash_resource, - .num_resources = 1, -}; - -/**************************************************************************** - * GPIO LEDs (simple - doesn't use hardware blinking support) - */ - -static struct gpio_led dns323_leds[] = { - { - .name = "power:blue", - .gpio = DNS323_GPIO_LED_POWER, - .active_low = 1, - }, { - .name = "right:amber", - .gpio = DNS323_GPIO_LED_RIGHT_AMBER, - .active_low = 1, - }, { - .name = "left:amber", - .gpio = DNS323_GPIO_LED_LEFT_AMBER, - .active_low = 1, - }, -}; - -static struct gpio_led_platform_data dns323_led_data = { - .num_leds = ARRAY_SIZE(dns323_leds), - .leds = dns323_leds, -}; - -static struct platform_device dns323_gpio_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { .platform_data = &dns323_led_data, }, -}; - -/**************************************************************************** - * GPIO Attached Keys - */ - -static struct gpio_keys_button dns323_buttons[] = { - { - .code = KEY_RESTART, - .gpio = DNS323_GPIO_KEY_RESET, - .desc = "Reset Button", - .active_low = 1, - }, - { - .code = KEY_POWER, - .gpio = DNS323_GPIO_KEY_POWER, - .desc = "Power Button", - .active_low = 1, - } -}; - -static struct gpio_keys_platform_data dns323_button_data = { - .buttons = dns323_buttons, - .nbuttons = ARRAY_SIZE(dns323_buttons), -}; - -static struct platform_device dns323_button_device = { - .name = "gpio-keys", - .id = -1, - .num_resources = 0, - .dev = { .platform_data = &dns323_button_data, }, -}; - -/**************************************************************************** - * General Setup - */ - -static struct platform_device *dns323_plat_devices[] __initdata = { - &dns323_nor_flash, - &dns323_gpio_leds, - &dns323_button_device, -}; - -/* - * On the DNS-323 the following devices are attached via I2C: - * - * i2c addr | chip | description - * 0x3e | GMT G760Af | fan speed PWM controller - * 0x48 | GMT G751-2f | temp. sensor and therm. watchdog (LM75 compatible) - * 0x68 | ST M41T80 | RTC w/ alarm - */ -static struct i2c_board_info __initdata dns323_i2c_devices[] = { - { - I2C_BOARD_INFO("g760a", 0x3e), - .type = "g760a", - }, -#if 0 - /* this entry requires the new-style driver model lm75 driver, - * for the meantime "insmod lm75.ko force_lm75=0,0x48" is needed */ - { - I2C_BOARD_INFO("lm75", 0x48), - .type = "g751", - }, -#endif - { - I2C_BOARD_INFO("rtc-m41t80", 0x68), - .type = "m41t80", - } -}; - -/* DNS-323 specific power off method */ -static void dns323_power_off(void) -{ - pr_info("%s: triggering power-off...\n", __func__); - gpio_set_value(DNS323_GPIO_POWER_OFF, 1); -} - -static void __init dns323_init(void) -{ - /* Setup basic Orion functions. Need to be called early. */ - orion_init(); - - /* setup flash mapping - * CS3 holds a 8 MB Spansion S29GL064M90TFIR4 - */ - orion_setup_cpu_win(ORION_DEV_BOOT, DNS323_NOR_BOOT_BASE, - DNS323_NOR_BOOT_SIZE, -1); - - /* DNS-323 has a Marvell 88X7042 SATA controller attached via PCIE - * - * Open a special address decode windows for the PCIE WA. - */ - orion_write(ORION_REGS_VIRT_BASE | 0x20074, ORION_PCIE_WA_PHYS_BASE); - orion_write(ORION_REGS_VIRT_BASE | 0x20070, - (0x7941 | (((ORION_PCIE_WA_SIZE >> 16) - 1)) << 16)); - - /* set MPP to 0 as D-Link's 2.6.12.6 kernel did */ - orion_write(MPP_0_7_CTRL, 0); - orion_write(MPP_8_15_CTRL, 0); - orion_write(MPP_16_19_CTRL, 0); - orion_write(MPP_DEV_CTRL, 0); - - /* Define used GPIO pins - - GPIO Map: - - | 0 | | PEX_RST_OUT (not controlled by GPIO) - | 1 | Out | right amber LED (= sata ch0 LED) (low-active) - | 2 | Out | left amber LED (= sata ch1 LED) (low-active) - | 3 | Out | //unknown// - | 4 | Out | power button LED (low-active, together with pin #5) - | 5 | Out | power button LED (low-active, together with pin #4) - | 6 | In | GMT G751-2f overtemp. shutdown signal (low-active) - | 7 | In | M41T80 nIRQ/OUT/SQW signal - | 8 | Out | triggers power off (high-active) - | 9 | In | power button switch (low-active) - | 10 | In | reset button switch (low-active) - | 11 | Out | //unknown// - | 12 | Out | //unknown// - | 13 | Out | //unknown// - | 14 | Out | //unknown// - | 15 | Out | //unknown// - */ - orion_gpio_set_valid_pins(0x07f6); - - /* register dns323 specific power-off method */ - if ((gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0) - || (gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)) - pr_err("DNS323: failed to setup power-off GPIO\n"); - - pm_power_off = dns323_power_off; - - /* register flash and other platform devices */ - platform_add_devices(dns323_plat_devices, - ARRAY_SIZE(dns323_plat_devices)); - - i2c_register_board_info(0, dns323_i2c_devices, - ARRAY_SIZE(dns323_i2c_devices)); - - orion_eth_init(&dns323_eth_data); -} - -/* Warning: D-Link uses a wrong mach-type (=526) in their bootloader */ -MACHINE_START(DNS323, "D-Link DNS-323") - /* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */ - .phys_io = ORION_REGS_PHYS_BASE, - .io_pg_offst = ((ORION_REGS_VIRT_BASE) >> 18) & 0xFFFC, - .boot_params = 0x00000100, - .init_machine = dns323_init, - .map_io = orion_map_io, - .init_irq = orion_init_irq, - .timer = &orion_timer, - .fixup = tag_fixup_mem32, -MACHINE_END diff --git a/arch/arm/mach-orion/gpio.c b/arch/arm/mach-orion/gpio.c deleted file mode 100644 index f713818c66a3..000000000000 --- a/arch/arm/mach-orion/gpio.c +++ /dev/null @@ -1,225 +0,0 @@ -/* - * arch/arm/mach-orion/gpio.c - * - * GPIO functions for Marvell Orion System On Chip - * - * Maintainer: Tzachi Perelstein <tzachi@marvell.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/spinlock.h> -#include <linux/bitops.h> -#include <asm/gpio.h> -#include <asm/arch/orion.h> -#include "common.h" - -static DEFINE_SPINLOCK(gpio_lock); -static unsigned long gpio_valid[BITS_TO_LONGS(GPIO_MAX)]; -static const char *gpio_label[GPIO_MAX]; /* non null for allocated GPIOs */ - -void __init orion_gpio_set_valid_pins(u32 pins) -{ - gpio_valid[0] = pins; -} - -/* - * GENERIC_GPIO primitives - */ -int gpio_direction_input(unsigned pin) -{ - unsigned long flags; - - if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) { - pr_debug("%s: invalid GPIO %d\n", __func__, pin); - return -EINVAL; - } - - spin_lock_irqsave(&gpio_lock, flags); - - /* - * Some callers might have not used the gpio_request(), - * so flag this pin as requested now. - */ - if (!gpio_label[pin]) - gpio_label[pin] = "?"; - - orion_setbits(GPIO_IO_CONF, 1 << pin); - - spin_unlock_irqrestore(&gpio_lock, flags); - return 0; -} -EXPORT_SYMBOL(gpio_direction_input); - -int gpio_direction_output(unsigned pin, int value) -{ - unsigned long flags; - int mask; - - if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) { - pr_debug("%s: invalid GPIO %d\n", __func__, pin); - return -EINVAL; - } - - spin_lock_irqsave(&gpio_lock, flags); - - /* - * Some callers might have not used the gpio_request(), - * so flag this pin as requested now. - */ - if (!gpio_label[pin]) - gpio_label[pin] = "?"; - - mask = 1 << pin; - orion_clrbits(GPIO_BLINK_EN, mask); - if (value) - orion_setbits(GPIO_OUT, mask); - else - orion_clrbits(GPIO_OUT, mask); - orion_clrbits(GPIO_IO_CONF, mask); - - spin_unlock_irqrestore(&gpio_lock, flags); - return 0; -} -EXPORT_SYMBOL(gpio_direction_output); - -int gpio_get_value(unsigned pin) -{ - int val, mask = 1 << pin; - - if (orion_read(GPIO_IO_CONF) & mask) - val = orion_read(GPIO_DATA_IN) ^ orion_read(GPIO_IN_POL); - else - val = orion_read(GPIO_OUT); - - return val & mask; -} -EXPORT_SYMBOL(gpio_get_value); - -void gpio_set_value(unsigned pin, int value) -{ - unsigned long flags; - int mask = 1 << pin; - - spin_lock_irqsave(&gpio_lock, flags); - - orion_clrbits(GPIO_BLINK_EN, mask); - if (value) - orion_setbits(GPIO_OUT, mask); - else - orion_clrbits(GPIO_OUT, mask); - - spin_unlock_irqrestore(&gpio_lock, flags); -} -EXPORT_SYMBOL(gpio_set_value); - -void orion_gpio_set_blink(unsigned pin, int blink) -{ - unsigned long flags; - int mask = 1 << pin; - - spin_lock_irqsave(&gpio_lock, flags); - - orion_clrbits(GPIO_OUT, mask); - if (blink) - orion_setbits(GPIO_BLINK_EN, mask); - else - orion_clrbits(GPIO_BLINK_EN, mask); - - spin_unlock_irqrestore(&gpio_lock, flags); -} -EXPORT_SYMBOL(orion_gpio_set_blink); - -int gpio_request(unsigned pin, const char *label) -{ - int ret = 0; - unsigned long flags; - - if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) { - pr_debug("%s: invalid GPIO %d\n", __func__, pin); - return -EINVAL; - } - - spin_lock_irqsave(&gpio_lock, flags); - - if (gpio_label[pin]) { - pr_debug("%s: GPIO %d already used as %s\n", - __func__, pin, gpio_label[pin]); - ret = -EBUSY; - } else - gpio_label[pin] = label ? label : "?"; - - spin_unlock_irqrestore(&gpio_lock, flags); - return ret; -} -EXPORT_SYMBOL(gpio_request); - -void gpio_free(unsigned pin) -{ - if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) { - pr_debug("%s: invalid GPIO %d\n", __func__, pin); - return; - } - - if (!gpio_label[pin]) - pr_warning("%s: GPIO %d already freed\n", __func__, pin); - else - gpio_label[pin] = NULL; -} -EXPORT_SYMBOL(gpio_free); - -/* Debug helper */ -void gpio_display(void) -{ - int i; - - for (i = 0; i < GPIO_MAX; i++) { - printk(KERN_DEBUG "Pin-%d: ", i); - - if (!test_bit(i, gpio_valid)) { - printk("non-GPIO\n"); - } else if (!gpio_label[i]) { - printk("GPIO, free\n"); - } else { - printk("GPIO, used by %s, ", gpio_label[i]); - if (orion_read(GPIO_IO_CONF) & (1 << i)) { - printk("input, active %s, level %s, edge %s\n", - ((orion_read(GPIO_IN_POL) >> i) & 1) ? "low" : "high", - ((orion_read(GPIO_LEVEL_MASK) >> i) & 1) ? "enabled" : "masked", - ((orion_read(GPIO_EDGE_MASK) >> i) & 1) ? "enabled" : "masked"); - } else { - printk("output, val=%d\n", (orion_read(GPIO_OUT) >> i) & 1); - } - } - } - - printk(KERN_DEBUG "MPP_0_7_CTRL (0x%08x) = 0x%08x\n", - MPP_0_7_CTRL, orion_read(MPP_0_7_CTRL)); - printk(KERN_DEBUG "MPP_8_15_CTRL (0x%08x) = 0x%08x\n", - MPP_8_15_CTRL, orion_read(MPP_8_15_CTRL)); - printk(KERN_DEBUG "MPP_16_19_CTRL (0x%08x) = 0x%08x\n", - MPP_16_19_CTRL, orion_read(MPP_16_19_CTRL)); - printk(KERN_DEBUG "MPP_DEV_CTRL (0x%08x) = 0x%08x\n", - MPP_DEV_CTRL, orion_read(MPP_DEV_CTRL)); - printk(KERN_DEBUG "GPIO_OUT (0x%08x) = 0x%08x\n", - GPIO_OUT, orion_read(GPIO_OUT)); - printk(KERN_DEBUG "GPIO_IO_CONF (0x%08x) = 0x%08x\n", - GPIO_IO_CONF, orion_read(GPIO_IO_CONF)); - printk(KERN_DEBUG "GPIO_BLINK_EN (0x%08x) = 0x%08x\n", - GPIO_BLINK_EN, orion_read(GPIO_BLINK_EN)); - printk(KERN_DEBUG "GPIO_IN_POL (0x%08x) = 0x%08x\n", - GPIO_IN_POL, orion_read(GPIO_IN_POL)); - printk(KERN_DEBUG "GPIO_DATA_IN (0x%08x) = 0x%08x\n", - GPIO_DATA_IN, orion_read(GPIO_DATA_IN)); - printk(KERN_DEBUG "GPIO_LEVEL_MASK (0x%08x) = 0x%08x\n", - GPIO_LEVEL_MASK, orion_read(GPIO_LEVEL_MASK)); - printk(KERN_DEBUG "GPIO_EDGE_CAUSE (0x%08x) = 0x%08x\n", - GPIO_EDGE_CAUSE, orion_read(GPIO_EDGE_CAUSE)); - printk(KERN_DEBUG "GPIO_EDGE_MASK (0x%08x) = 0x%08x\n", - GPIO_EDGE_MASK, orion_read(GPIO_EDGE_MASK)); -} diff --git a/arch/arm/mach-orion/irq.c b/arch/arm/mach-orion/irq.c deleted file mode 100644 index df7e12ad378b..000000000000 --- a/arch/arm/mach-orion/irq.c +++ /dev/null @@ -1,241 +0,0 @@ -/* - * arch/arm/mach-orion/irq.c - * - * Core IRQ functions for Marvell Orion System On Chip - * - * Maintainer: Tzachi Perelstein <tzachi@marvell.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/irq.h> -#include <asm/gpio.h> -#include <asm/arch/orion.h> -#include "common.h" - -/***************************************************************************** - * Orion GPIO IRQ - * - * GPIO_IN_POL register controlls whether GPIO_DATA_IN will hold the same - * value of the line or the opposite value. - * - * Level IRQ handlers: DATA_IN is used directly as cause register. - * Interrupt are masked by LEVEL_MASK registers. - * Edge IRQ handlers: Change in DATA_IN are latched in EDGE_CAUSE. - * Interrupt are masked by EDGE_MASK registers. - * Both-edge handlers: Similar to regular Edge handlers, but also swaps - * the polarity to catch the next line transaction. - * This is a race condition that might not perfectly - * work on some use cases. - * - * Every eight GPIO lines are grouped (OR'ed) before going up to main - * cause register. - * - * EDGE cause mask - * data-in /--------| |-----| |----\ - * -----| |----- ---- to main cause reg - * X \----------------| |----/ - * polarity LEVEL mask - * - ****************************************************************************/ -static void orion_gpio_irq_ack(u32 irq) -{ - int pin = irq_to_gpio(irq); - if (irq_desc[irq].status & IRQ_LEVEL) - /* - * Mask bit for level interrupt - */ - orion_clrbits(GPIO_LEVEL_MASK, 1 << pin); - else - /* - * Clear casue bit for egde interrupt - */ - orion_clrbits(GPIO_EDGE_CAUSE, 1 << pin); -} - -static void orion_gpio_irq_mask(u32 irq) -{ - int pin = irq_to_gpio(irq); - if (irq_desc[irq].status & IRQ_LEVEL) - orion_clrbits(GPIO_LEVEL_MASK, 1 << pin); - else - orion_clrbits(GPIO_EDGE_MASK, 1 << pin); -} - -static void orion_gpio_irq_unmask(u32 irq) -{ - int pin = irq_to_gpio(irq); - if (irq_desc[irq].status & IRQ_LEVEL) - orion_setbits(GPIO_LEVEL_MASK, 1 << pin); - else - orion_setbits(GPIO_EDGE_MASK, 1 << pin); -} - -static int orion_gpio_set_irq_type(u32 irq, u32 type) -{ - int pin = irq_to_gpio(irq); - struct irq_desc *desc; - - if ((orion_read(GPIO_IO_CONF) & (1 << pin)) == 0) { - printk(KERN_ERR "orion_gpio_set_irq_type failed " - "(irq %d, pin %d).\n", irq, pin); - return -EINVAL; - } - - desc = irq_desc + irq; - - switch (type) { - case IRQT_HIGH: - desc->handle_irq = handle_level_irq; - desc->status |= IRQ_LEVEL; - orion_clrbits(GPIO_IN_POL, (1 << pin)); - break; - case IRQT_LOW: - desc->handle_irq = handle_level_irq; - desc->status |= IRQ_LEVEL; - orion_setbits(GPIO_IN_POL, (1 << pin)); - break; - case IRQT_RISING: - desc->handle_irq = handle_edge_irq; - desc->status &= ~IRQ_LEVEL; - orion_clrbits(GPIO_IN_POL, (1 << pin)); - break; - case IRQT_FALLING: - desc->handle_irq = handle_edge_irq; - desc->status &= ~IRQ_LEVEL; - orion_setbits(GPIO_IN_POL, (1 << pin)); - break; - case IRQT_BOTHEDGE: - desc->handle_irq = handle_edge_irq; - desc->status &= ~IRQ_LEVEL; - /* - * set initial polarity based on current input level - */ - if ((orion_read(GPIO_IN_POL) ^ orion_read(GPIO_DATA_IN)) - & (1 << pin)) - orion_setbits(GPIO_IN_POL, (1 << pin)); /* falling */ - else - orion_clrbits(GPIO_IN_POL, (1 << pin)); /* rising */ - - break; - default: - printk(KERN_ERR "failed to set irq=%d (type=%d)\n", irq, type); - return -EINVAL; - } - - desc->status &= ~IRQ_TYPE_SENSE_MASK; - desc->status |= type & IRQ_TYPE_SENSE_MASK; - - return 0; -} - -static struct irq_chip orion_gpio_irq_chip = { - .name = "Orion-IRQ-GPIO", - .ack = orion_gpio_irq_ack, - .mask = orion_gpio_irq_mask, - .unmask = orion_gpio_irq_unmask, - .set_type = orion_gpio_set_irq_type, -}; - -static void orion_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - u32 cause, offs, pin; - - BUG_ON(irq < IRQ_ORION_GPIO_0_7 || irq > IRQ_ORION_GPIO_24_31); - offs = (irq - IRQ_ORION_GPIO_0_7) * 8; - cause = (orion_read(GPIO_DATA_IN) & orion_read(GPIO_LEVEL_MASK)) | - (orion_read(GPIO_EDGE_CAUSE) & orion_read(GPIO_EDGE_MASK)); - - for (pin = offs; pin < offs + 8; pin++) { - if (cause & (1 << pin)) { - irq = gpio_to_irq(pin); - desc = irq_desc + irq; - if ((desc->status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE) { - /* Swap polarity (race with GPIO line) */ - u32 polarity = orion_read(GPIO_IN_POL); - polarity ^= 1 << pin; - orion_write(GPIO_IN_POL, polarity); - } - desc_handle_irq(irq, desc); - } - } -} - -static void __init orion_init_gpio_irq(void) -{ - int i; - struct irq_desc *desc; - - /* - * Mask and clear GPIO IRQ interrupts - */ - orion_write(GPIO_LEVEL_MASK, 0x0); - orion_write(GPIO_EDGE_MASK, 0x0); - orion_write(GPIO_EDGE_CAUSE, 0x0); - - /* - * Register chained level handlers for GPIO IRQs by default. - * User can use set_type() if he wants to use edge types handlers. - */ - for (i = IRQ_ORION_GPIO_START; i < NR_IRQS; i++) { - set_irq_chip(i, &orion_gpio_irq_chip); - set_irq_handler(i, handle_level_irq); - desc = irq_desc + i; - desc->status |= IRQ_LEVEL; - set_irq_flags(i, IRQF_VALID); - } - set_irq_chained_handler(IRQ_ORION_GPIO_0_7, orion_gpio_irq_handler); - set_irq_chained_handler(IRQ_ORION_GPIO_8_15, orion_gpio_irq_handler); - set_irq_chained_handler(IRQ_ORION_GPIO_16_23, orion_gpio_irq_handler); - set_irq_chained_handler(IRQ_ORION_GPIO_24_31, orion_gpio_irq_handler); -} - -/***************************************************************************** - * Orion Main IRQ - ****************************************************************************/ -static void orion_main_irq_mask(u32 irq) -{ - orion_clrbits(MAIN_IRQ_MASK, 1 << irq); -} - -static void orion_main_irq_unmask(u32 irq) -{ - orion_setbits(MAIN_IRQ_MASK, 1 << irq); -} - -static struct irq_chip orion_main_irq_chip = { - .name = "Orion-IRQ-Main", - .ack = orion_main_irq_mask, - .mask = orion_main_irq_mask, - .unmask = orion_main_irq_unmask, -}; - -static void __init orion_init_main_irq(void) -{ - int i; - - /* - * Mask and clear Main IRQ interrupts - */ - orion_write(MAIN_IRQ_MASK, 0x0); - orion_write(MAIN_IRQ_CAUSE, 0x0); - - /* - * Register level handler for Main IRQs - */ - for (i = 0; i < IRQ_ORION_GPIO_START; i++) { - set_irq_chip(i, &orion_main_irq_chip); - set_irq_handler(i, handle_level_irq); - set_irq_flags(i, IRQF_VALID); - } -} - -void __init orion_init_irq(void) -{ - orion_init_main_irq(); - orion_init_gpio_irq(); -} diff --git a/arch/arm/mach-orion/kurobox_pro-setup.c b/arch/arm/mach-orion/kurobox_pro-setup.c deleted file mode 100644 index 785a07bdf1e2..000000000000 --- a/arch/arm/mach-orion/kurobox_pro-setup.c +++ /dev/null @@ -1,244 +0,0 @@ -/* - * arch/arm/mach-orion/kurobox_pro-setup.c - * - * Maintainer: Ronen Shitrit <rshitrit@marvell.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/pci.h> -#include <linux/irq.h> -#include <linux/mtd/physmap.h> -#include <linux/mtd/nand.h> -#include <linux/mv643xx_eth.h> -#include <linux/i2c.h> -#include <linux/ata_platform.h> -#include <asm/mach-types.h> -#include <asm/gpio.h> -#include <asm/mach/arch.h> -#include <asm/mach/pci.h> -#include <asm/arch/orion.h> -#include <asm/arch/platform.h> -#include "common.h" - -/***************************************************************************** - * KUROBOX-PRO Info - ****************************************************************************/ - -/* - * 256K NOR flash Device bus boot chip select - */ - -#define KUROBOX_PRO_NOR_BOOT_BASE 0xf4000000 -#define KUROBOX_PRO_NOR_BOOT_SIZE SZ_256K - -/* - * 256M NAND flash on Device bus chip select 1 - */ - -#define KUROBOX_PRO_NAND_BASE 0xfc000000 -#define KUROBOX_PRO_NAND_SIZE SZ_2M - -/***************************************************************************** - * 256MB NAND Flash on Device bus CS0 - ****************************************************************************/ - -static struct mtd_partition kurobox_pro_nand_parts[] = { - { - .name = "uImage", - .offset = 0, - .size = SZ_4M, - }, - { - .name = "rootfs", - .offset = SZ_4M, - .size = SZ_64M, - }, - { - .name = "extra", - .offset = SZ_4M + SZ_64M, - .size = SZ_256M - (SZ_4M + SZ_64M), - }, -}; - -static struct resource kurobox_pro_nand_resource = { - .flags = IORESOURCE_MEM, - .start = KUROBOX_PRO_NAND_BASE, - .end = KUROBOX_PRO_NAND_BASE + KUROBOX_PRO_NAND_SIZE - 1, -}; - -static struct orion_nand_data kurobox_pro_nand_data = { - .parts = kurobox_pro_nand_parts, - .nr_parts = ARRAY_SIZE(kurobox_pro_nand_parts), - .cle = 0, - .ale = 1, - .width = 8, -}; - -static struct platform_device kurobox_pro_nand_flash = { - .name = "orion_nand", - .id = -1, - .dev = { - .platform_data = &kurobox_pro_nand_data, - }, - .resource = &kurobox_pro_nand_resource, - .num_resources = 1, -}; - -/***************************************************************************** - * 256KB NOR Flash on BOOT Device - ****************************************************************************/ - -static struct physmap_flash_data kurobox_pro_nor_flash_data = { - .width = 1, -}; - -static struct resource kurobox_pro_nor_flash_resource = { - .flags = IORESOURCE_MEM, - .start = KUROBOX_PRO_NOR_BOOT_BASE, - .end = KUROBOX_PRO_NOR_BOOT_BASE + KUROBOX_PRO_NOR_BOOT_SIZE - 1, -}; - -static struct platform_device kurobox_pro_nor_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &kurobox_pro_nor_flash_data, - }, - .num_resources = 1, - .resource = &kurobox_pro_nor_flash_resource, -}; - -/***************************************************************************** - * PCI - ****************************************************************************/ - -static int __init kurobox_pro_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) -{ - /* - * PCI isn't used on the Kuro - */ - if (dev->bus->number == orion_pcie_local_bus_nr()) - return IRQ_ORION_PCIE0_INT; - else - printk(KERN_ERR "kurobox_pro_pci_map_irq failed, unknown bus\n"); - - return -1; -} - -static struct hw_pci kurobox_pro_pci __initdata = { - .nr_controllers = 1, - .swizzle = pci_std_swizzle, - .setup = orion_pci_sys_setup, - .scan = orion_pci_sys_scan_bus, - .map_irq = kurobox_pro_pci_map_irq, -}; - -static int __init kurobox_pro_pci_init(void) -{ - if (machine_is_kurobox_pro()) - pci_common_init(&kurobox_pro_pci); - - return 0; -} - -subsys_initcall(kurobox_pro_pci_init); - -/***************************************************************************** - * Ethernet - ****************************************************************************/ - -static struct mv643xx_eth_platform_data kurobox_pro_eth_data = { - .phy_addr = 8, - .force_phy_addr = 1, -}; - -/***************************************************************************** - * RTC 5C372a on I2C bus - ****************************************************************************/ -static struct i2c_board_info __initdata kurobox_pro_i2c_rtc = { - .driver_name = "rtc-rs5c372", - .type = "rs5c372a", - .addr = 0x32, -}; - -/***************************************************************************** - * SATA - ****************************************************************************/ -static struct mv_sata_platform_data kurobox_pro_sata_data = { - .n_ports = 2, -}; - -/***************************************************************************** - * General Setup - ****************************************************************************/ - -static struct platform_device *kurobox_pro_devices[] __initdata = { - &kurobox_pro_nor_flash, - &kurobox_pro_nand_flash, -}; - -static void __init kurobox_pro_init(void) -{ - /* - * Setup basic Orion functions. Need to be called early. - */ - orion_init(); - - /* - * Setup the CPU address decode windows for our devices - */ - orion_setup_cpu_win(ORION_DEV_BOOT, KUROBOX_PRO_NOR_BOOT_BASE, - KUROBOX_PRO_NOR_BOOT_SIZE, -1); - orion_setup_cpu_win(ORION_DEV0, KUROBOX_PRO_NAND_BASE, - KUROBOX_PRO_NAND_SIZE, -1); - /* - * Open a special address decode windows for the PCIE WA. - */ - orion_write(ORION_REGS_VIRT_BASE | 0x20074, ORION_PCIE_WA_PHYS_BASE); - orion_write(ORION_REGS_VIRT_BASE | 0x20070, (0x7941 | - (((ORION_PCIE_WA_SIZE >> 16) - 1)) << 16)); - - /* - * Setup Multiplexing Pins -- - * MPP[0-1] Not used - * MPP[2] GPIO Micon - * MPP[3] GPIO RTC - * MPP[4-5] Not used - * MPP[6] Nand Flash REn - * MPP[7] Nand Flash WEn - * MPP[8-11] Not used - * MPP[12] SATA 0 presence Indication - * MPP[13] SATA 1 presence Indication - * MPP[14] SATA 0 active Indication - * MPP[15] SATA 1 active indication - * MPP[16-19] Not used - */ - orion_write(MPP_0_7_CTRL, 0x44220003); - orion_write(MPP_8_15_CTRL, 0x55550000); - orion_write(MPP_16_19_CTRL, 0x0); - - orion_gpio_set_valid_pins(0x0000000c); - - platform_add_devices(kurobox_pro_devices, ARRAY_SIZE(kurobox_pro_devices)); - i2c_register_board_info(0, &kurobox_pro_i2c_rtc, 1); - orion_eth_init(&kurobox_pro_eth_data); - orion_sata_init(&kurobox_pro_sata_data); -} - -MACHINE_START(KUROBOX_PRO, "Buffalo/Revogear Kurobox Pro") - /* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */ - .phys_io = ORION_REGS_PHYS_BASE, - .io_pg_offst = ((ORION_REGS_VIRT_BASE) >> 18) & 0xFFFC, - .boot_params = 0x00000100, - .init_machine = kurobox_pro_init, - .map_io = orion_map_io, - .init_irq = orion_init_irq, - .timer = &orion_timer, - .fixup = tag_fixup_mem32, -MACHINE_END diff --git a/arch/arm/mach-orion/pci.c b/arch/arm/mach-orion/pci.c deleted file mode 100644 index b109bb46681e..000000000000 --- a/arch/arm/mach-orion/pci.c +++ /dev/null @@ -1,557 +0,0 @@ -/* - * arch/arm/mach-orion/pci.c - * - * PCI and PCIE functions for Marvell Orion System On Chip - * - * Maintainer: Tzachi Perelstein <tzachi@marvell.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/pci.h> -#include <asm/mach/pci.h> -#include "common.h" - -/***************************************************************************** - * Orion has one PCIE controller and one PCI controller. - * - * Note1: The local PCIE bus number is '0'. The local PCI bus number - * follows the scanned PCIE bridged busses, if any. - * - * Note2: It is possible for PCI/PCIE agents to access many subsystem's - * space, by configuring BARs and Address Decode Windows, e.g. flashes on - * device bus, Orion registers, etc. However this code only enable the - * access to DDR banks. - ****************************************************************************/ - - -/***************************************************************************** - * PCIE controller - ****************************************************************************/ -#define PCIE_CTRL ORION_PCIE_REG(0x1a00) -#define PCIE_STAT ORION_PCIE_REG(0x1a04) -#define PCIE_DEV_ID ORION_PCIE_REG(0x0000) -#define PCIE_CMD_STAT ORION_PCIE_REG(0x0004) -#define PCIE_DEV_REV ORION_PCIE_REG(0x0008) -#define PCIE_MASK ORION_PCIE_REG(0x1910) -#define PCIE_CONF_ADDR ORION_PCIE_REG(0x18f8) -#define PCIE_CONF_DATA ORION_PCIE_REG(0x18fc) - -/* - * PCIE_STAT bits - */ -#define PCIE_STAT_LINK_DOWN 1 -#define PCIE_STAT_BUS_OFFS 8 -#define PCIE_STAT_BUS_MASK (0xff << PCIE_STAT_BUS_OFFS) -#define PCIE_STAT_DEV_OFFS 20 -#define PCIE_STAT_DEV_MASK (0x1f << PCIE_STAT_DEV_OFFS) - -/* - * PCIE_CONF_ADDR bits - */ -#define PCIE_CONF_REG(r) ((((r) & 0xf00) << 24) | ((r) & 0xfc)) -#define PCIE_CONF_FUNC(f) (((f) & 0x3) << 8) -#define PCIE_CONF_DEV(d) (((d) & 0x1f) << 11) -#define PCIE_CONF_BUS(b) (((b) & 0xff) << 16) -#define PCIE_CONF_ADDR_EN (1 << 31) - -/* - * PCIE config cycles are done by programming the PCIE_CONF_ADDR register - * and then reading the PCIE_CONF_DATA register. Need to make sure these - * transactions are atomic. - */ -static DEFINE_SPINLOCK(orion_pcie_lock); - -void orion_pcie_id(u32 *dev, u32 *rev) -{ - *dev = orion_read(PCIE_DEV_ID) >> 16; - *rev = orion_read(PCIE_DEV_REV) & 0xff; -} - -u32 orion_pcie_local_bus_nr(void) -{ - u32 stat = orion_read(PCIE_STAT); - return((stat & PCIE_STAT_BUS_MASK) >> PCIE_STAT_BUS_OFFS); -} - -static u32 orion_pcie_local_dev_nr(void) -{ - u32 stat = orion_read(PCIE_STAT); - return((stat & PCIE_STAT_DEV_MASK) >> PCIE_STAT_DEV_OFFS); -} - -static u32 orion_pcie_no_link(void) -{ - u32 stat = orion_read(PCIE_STAT); - return(stat & PCIE_STAT_LINK_DOWN); -} - -static void orion_pcie_set_bus_nr(int nr) -{ - orion_clrbits(PCIE_STAT, PCIE_STAT_BUS_MASK); - orion_setbits(PCIE_STAT, nr << PCIE_STAT_BUS_OFFS); -} - -static void orion_pcie_master_slave_enable(void) -{ - orion_setbits(PCIE_CMD_STAT, PCI_COMMAND_MASTER | - PCI_COMMAND_IO | - PCI_COMMAND_MEMORY); -} - -static void orion_pcie_enable_interrupts(void) -{ - /* - * Enable interrupts lines - * INTA[24] INTB[25] INTC[26] INTD[27] - */ - orion_setbits(PCIE_MASK, 0xf<<24); -} - -static int orion_pcie_valid_config(u32 bus, u32 dev) -{ - /* - * Don't go out when trying to access -- - * 1. our own device - * 2. where there's no device connected (no link) - * 3. nonexisting devices on local bus - */ - - if ((orion_pcie_local_bus_nr() == bus) && - (orion_pcie_local_dev_nr() == dev)) - return 0; - - if (orion_pcie_no_link()) - return 0; - - if (bus == orion_pcie_local_bus_nr()) - if (((orion_pcie_local_dev_nr() == 0) && (dev != 1)) || - ((orion_pcie_local_dev_nr() != 0) && (dev != 0))) - return 0; - - return 1; -} - -static int orion_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where, - int size, u32 *val) -{ - unsigned long flags; - unsigned int dev, rev, pcie_addr; - - if (orion_pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0) { - *val = 0xffffffff; - return PCIBIOS_DEVICE_NOT_FOUND; - } - - spin_lock_irqsave(&orion_pcie_lock, flags); - - orion_write(PCIE_CONF_ADDR, PCIE_CONF_BUS(bus->number) | - PCIE_CONF_DEV(PCI_SLOT(devfn)) | - PCIE_CONF_FUNC(PCI_FUNC(devfn)) | - PCIE_CONF_REG(where) | PCIE_CONF_ADDR_EN); - - orion_pcie_id(&dev, &rev); - if (dev == MV88F5181_DEV_ID || dev == MV88F5182_DEV_ID) { - /* extended register space */ - pcie_addr = ORION_PCIE_WA_VIRT_BASE; - pcie_addr |= PCIE_CONF_BUS(bus->number) | - PCIE_CONF_DEV(PCI_SLOT(devfn)) | - PCIE_CONF_FUNC(PCI_FUNC(devfn)) | - PCIE_CONF_REG(where); - *val = orion_read(pcie_addr); - } else - *val = orion_read(PCIE_CONF_DATA); - - if (size == 1) - *val = (*val >> (8*(where & 0x3))) & 0xff; - else if (size == 2) - *val = (*val >> (8*(where & 0x3))) & 0xffff; - - spin_unlock_irqrestore(&orion_pcie_lock, flags); - - return PCIBIOS_SUCCESSFUL; -} - - -static int orion_pcie_wr_conf(struct pci_bus *bus, u32 devfn, int where, - int size, u32 val) -{ - unsigned long flags; - int ret; - - if (orion_pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0) - return PCIBIOS_DEVICE_NOT_FOUND; - - spin_lock_irqsave(&orion_pcie_lock, flags); - - ret = PCIBIOS_SUCCESSFUL; - - orion_write(PCIE_CONF_ADDR, PCIE_CONF_BUS(bus->number) | - PCIE_CONF_DEV(PCI_SLOT(devfn)) | - PCIE_CONF_FUNC(PCI_FUNC(devfn)) | - PCIE_CONF_REG(where) | PCIE_CONF_ADDR_EN); - - if (size == 4) { - __raw_writel(val, PCIE_CONF_DATA); - } else if (size == 2) { - __raw_writew(val, PCIE_CONF_DATA + (where & 0x3)); - } else if (size == 1) { - __raw_writeb(val, PCIE_CONF_DATA + (where & 0x3)); - } else { - ret = PCIBIOS_BAD_REGISTER_NUMBER; - } - - spin_unlock_irqrestore(&orion_pcie_lock, flags); - - return ret; -} - -struct pci_ops orion_pcie_ops = { - .read = orion_pcie_rd_conf, - .write = orion_pcie_wr_conf, -}; - - -static int orion_pcie_setup(struct pci_sys_data *sys) -{ - struct resource *res; - - /* - * Master + Slave enable - */ - orion_pcie_master_slave_enable(); - - /* - * Enable interrupts lines A-D - */ - orion_pcie_enable_interrupts(); - - /* - * Request resource - */ - res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL); - if (!res) - panic("orion_pci_setup unable to alloc resources"); - - /* - * IORESOURCE_IO - */ - res[0].name = "PCI-EX I/O Space"; - res[0].flags = IORESOURCE_IO; - res[0].start = ORION_PCIE_IO_BUS_BASE; - res[0].end = res[0].start + ORION_PCIE_IO_SIZE - 1; - if (request_resource(&ioport_resource, &res[0])) - panic("Request PCIE IO resource failed\n"); - sys->resource[0] = &res[0]; - - /* - * IORESOURCE_MEM - */ - res[1].name = "PCI-EX Memory Space"; - res[1].flags = IORESOURCE_MEM; - res[1].start = ORION_PCIE_MEM_PHYS_BASE; - res[1].end = res[1].start + ORION_PCIE_MEM_SIZE - 1; - if (request_resource(&iomem_resource, &res[1])) - panic("Request PCIE Memory resource failed\n"); - sys->resource[1] = &res[1]; - - sys->resource[2] = NULL; - sys->io_offset = 0; - - return 1; -} - -/***************************************************************************** - * PCI controller - ****************************************************************************/ -#define PCI_MODE ORION_PCI_REG(0xd00) -#define PCI_CMD ORION_PCI_REG(0xc00) -#define PCI_P2P_CONF ORION_PCI_REG(0x1d14) -#define PCI_CONF_ADDR ORION_PCI_REG(0xc78) -#define PCI_CONF_DATA ORION_PCI_REG(0xc7c) - -/* - * PCI_MODE bits - */ -#define PCI_MODE_64BIT (1 << 2) -#define PCI_MODE_PCIX ((1 << 4) | (1 << 5)) - -/* - * PCI_CMD bits - */ -#define PCI_CMD_HOST_REORDER (1 << 29) - -/* - * PCI_P2P_CONF bits - */ -#define PCI_P2P_BUS_OFFS 16 -#define PCI_P2P_BUS_MASK (0xff << PCI_P2P_BUS_OFFS) -#define PCI_P2P_DEV_OFFS 24 -#define PCI_P2P_DEV_MASK (0x1f << PCI_P2P_DEV_OFFS) - -/* - * PCI_CONF_ADDR bits - */ -#define PCI_CONF_REG(reg) ((reg) & 0xfc) -#define PCI_CONF_FUNC(func) (((func) & 0x3) << 8) -#define PCI_CONF_DEV(dev) (((dev) & 0x1f) << 11) -#define PCI_CONF_BUS(bus) (((bus) & 0xff) << 16) -#define PCI_CONF_ADDR_EN (1 << 31) - -/* - * Internal configuration space - */ -#define PCI_CONF_FUNC_STAT_CMD 0 -#define PCI_CONF_REG_STAT_CMD 4 -#define PCIX_STAT 0x64 -#define PCIX_STAT_BUS_OFFS 8 -#define PCIX_STAT_BUS_MASK (0xff << PCIX_STAT_BUS_OFFS) - -/* - * PCI config cycles are done by programming the PCI_CONF_ADDR register - * and then reading the PCI_CONF_DATA register. Need to make sure these - * transactions are atomic. - */ -static DEFINE_SPINLOCK(orion_pci_lock); - -u32 orion_pci_local_bus_nr(void) -{ - u32 conf = orion_read(PCI_P2P_CONF); - return((conf & PCI_P2P_BUS_MASK) >> PCI_P2P_BUS_OFFS); -} - -u32 orion_pci_local_dev_nr(void) -{ - u32 conf = orion_read(PCI_P2P_CONF); - return((conf & PCI_P2P_DEV_MASK) >> PCI_P2P_DEV_OFFS); -} - -int orion_pci_hw_rd_conf(u32 bus, u32 dev, u32 func, - u32 where, u32 size, u32 *val) -{ - unsigned long flags; - spin_lock_irqsave(&orion_pci_lock, flags); - - orion_write(PCI_CONF_ADDR, PCI_CONF_BUS(bus) | - PCI_CONF_DEV(dev) | PCI_CONF_REG(where) | - PCI_CONF_FUNC(func) | PCI_CONF_ADDR_EN); - - *val = orion_read(PCI_CONF_DATA); - - if (size == 1) - *val = (*val >> (8*(where & 0x3))) & 0xff; - else if (size == 2) - *val = (*val >> (8*(where & 0x3))) & 0xffff; - - spin_unlock_irqrestore(&orion_pci_lock, flags); - - return PCIBIOS_SUCCESSFUL; -} - -int orion_pci_hw_wr_conf(u32 bus, u32 dev, u32 func, - u32 where, u32 size, u32 val) -{ - unsigned long flags; - int ret = PCIBIOS_SUCCESSFUL; - - spin_lock_irqsave(&orion_pci_lock, flags); - - orion_write(PCI_CONF_ADDR, PCI_CONF_BUS(bus) | - PCI_CONF_DEV(dev) | PCI_CONF_REG(where) | - PCI_CONF_FUNC(func) | PCI_CONF_ADDR_EN); - - if (size == 4) { - __raw_writel(val, PCI_CONF_DATA); - } else if (size == 2) { - __raw_writew(val, PCI_CONF_DATA + (where & 0x3)); - } else if (size == 1) { - __raw_writeb(val, PCI_CONF_DATA + (where & 0x3)); - } else { - ret = PCIBIOS_BAD_REGISTER_NUMBER; - } - - spin_unlock_irqrestore(&orion_pci_lock, flags); - - return ret; -} - -static int orion_pci_rd_conf(struct pci_bus *bus, u32 devfn, - int where, int size, u32 *val) -{ - /* - * Don't go out for local device - */ - if ((orion_pci_local_bus_nr() == bus->number) && - (orion_pci_local_dev_nr() == PCI_SLOT(devfn))) { - *val = 0xffffffff; - return PCIBIOS_DEVICE_NOT_FOUND; - } - - return orion_pci_hw_rd_conf(bus->number, PCI_SLOT(devfn), - PCI_FUNC(devfn), where, size, val); -} - -static int orion_pci_wr_conf(struct pci_bus *bus, u32 devfn, - int where, int size, u32 val) -{ - /* - * Don't go out for local device - */ - if ((orion_pci_local_bus_nr() == bus->number) && - (orion_pci_local_dev_nr() == PCI_SLOT(devfn))) - return PCIBIOS_DEVICE_NOT_FOUND; - - return orion_pci_hw_wr_conf(bus->number, PCI_SLOT(devfn), - PCI_FUNC(devfn), where, size, val); -} - -struct pci_ops orion_pci_ops = { - .read = orion_pci_rd_conf, - .write = orion_pci_wr_conf, -}; - -static void orion_pci_set_bus_nr(int nr) -{ - u32 p2p = orion_read(PCI_P2P_CONF); - - if (orion_read(PCI_MODE) & PCI_MODE_PCIX) { - /* - * PCI-X mode - */ - u32 pcix_status, bus, dev; - bus = (p2p & PCI_P2P_BUS_MASK) >> PCI_P2P_BUS_OFFS; - dev = (p2p & PCI_P2P_DEV_MASK) >> PCI_P2P_DEV_OFFS; - orion_pci_hw_rd_conf(bus, dev, 0, PCIX_STAT, 4, &pcix_status); - pcix_status &= ~PCIX_STAT_BUS_MASK; - pcix_status |= (nr << PCIX_STAT_BUS_OFFS); - orion_pci_hw_wr_conf(bus, dev, 0, PCIX_STAT, 4, pcix_status); - } else { - /* - * PCI Conventional mode - */ - p2p &= ~PCI_P2P_BUS_MASK; - p2p |= (nr << PCI_P2P_BUS_OFFS); - orion_write(PCI_P2P_CONF, p2p); - } -} - -static void orion_pci_master_slave_enable(void) -{ - u32 bus_nr, dev_nr, func, reg, val; - - bus_nr = orion_pci_local_bus_nr(); - dev_nr = orion_pci_local_dev_nr(); - func = PCI_CONF_FUNC_STAT_CMD; - reg = PCI_CONF_REG_STAT_CMD; - orion_pci_hw_rd_conf(bus_nr, dev_nr, func, reg, 4, &val); - val |= (PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); - orion_pci_hw_wr_conf(bus_nr, dev_nr, func, reg, 4, val | 0x7); -} - -static int orion_pci_setup(struct pci_sys_data *sys) -{ - struct resource *res; - - /* - * Master + Slave enable - */ - orion_pci_master_slave_enable(); - - /* - * Force ordering - */ - orion_setbits(PCI_CMD, PCI_CMD_HOST_REORDER); - - /* - * Request resources - */ - res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL); - if (!res) - panic("orion_pci_setup unable to alloc resources"); - - /* - * IORESOURCE_IO - */ - res[0].name = "PCI I/O Space"; - res[0].flags = IORESOURCE_IO; - res[0].start = ORION_PCI_IO_BUS_BASE; - res[0].end = res[0].start + ORION_PCI_IO_SIZE - 1; - if (request_resource(&ioport_resource, &res[0])) - panic("Request PCI IO resource failed\n"); - sys->resource[0] = &res[0]; - - /* - * IORESOURCE_MEM - */ - res[1].name = "PCI Memory Space"; - res[1].flags = IORESOURCE_MEM; - res[1].start = ORION_PCI_MEM_PHYS_BASE; - res[1].end = res[1].start + ORION_PCI_MEM_SIZE - 1; - if (request_resource(&iomem_resource, &res[1])) - panic("Request PCI Memory resource failed\n"); - sys->resource[1] = &res[1]; - - sys->resource[2] = NULL; - sys->io_offset = 0; - - return 1; -} - - -/***************************************************************************** - * General PCIE + PCI - ****************************************************************************/ -int orion_pci_sys_setup(int nr, struct pci_sys_data *sys) -{ - int ret = 0; - - if (nr == 0) { - /* - * PCIE setup - */ - orion_pcie_set_bus_nr(0); - ret = orion_pcie_setup(sys); - } else if (nr == 1) { - /* - * PCI setup - */ - ret = orion_pci_setup(sys); - } - - return ret; -} - -struct pci_bus *orion_pci_sys_scan_bus(int nr, struct pci_sys_data *sys) -{ - struct pci_ops *ops; - struct pci_bus *bus; - - - if (nr == 0) { - u32 pci_bus; - /* - * PCIE scan - */ - ops = &orion_pcie_ops; - bus = pci_scan_bus(sys->busnr, ops, sys); - /* - * Set local PCI bus number to follow PCIE bridges (if any) - */ - pci_bus = bus->number + bus->subordinate - bus->secondary + 1; - orion_pci_set_bus_nr(pci_bus); - } else if (nr == 1) { - /* - * PCI scan - */ - ops = &orion_pci_ops; - bus = pci_scan_bus(sys->busnr, ops, sys); - } else { - BUG(); - bus = NULL; - } - - return bus; -} diff --git a/arch/arm/mach-orion/rd88f5182-setup.c b/arch/arm/mach-orion/rd88f5182-setup.c deleted file mode 100644 index e851b8ca5ac6..000000000000 --- a/arch/arm/mach-orion/rd88f5182-setup.c +++ /dev/null @@ -1,315 +0,0 @@ -/* - * arch/arm/mach-orion/rd88f5182-setup.c - * - * Marvell Orion-NAS Reference Design Setup - * - * Maintainer: Ronen Shitrit <rshitrit@marvell.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/pci.h> -#include <linux/irq.h> -#include <linux/mtd/physmap.h> -#include <linux/mv643xx_eth.h> -#include <linux/ata_platform.h> -#include <linux/i2c.h> -#include <asm/mach-types.h> -#include <asm/gpio.h> -#include <asm/leds.h> -#include <asm/mach/arch.h> -#include <asm/mach/pci.h> -#include <asm/arch/orion.h> -#include <asm/arch/platform.h> -#include "common.h" - -/***************************************************************************** - * RD-88F5182 Info - ****************************************************************************/ - -/* - * 512K NOR flash Device bus boot chip select - */ - -#define RD88F5182_NOR_BOOT_BASE 0xf4000000 -#define RD88F5182_NOR_BOOT_SIZE SZ_512K - -/* - * 16M NOR flash on Device bus chip select 1 - */ - -#define RD88F5182_NOR_BASE 0xfc000000 -#define RD88F5182_NOR_SIZE SZ_16M - -/* - * PCI - */ - -#define RD88F5182_PCI_SLOT0_OFFS 7 -#define RD88F5182_PCI_SLOT0_IRQ_A_PIN 7 -#define RD88F5182_PCI_SLOT0_IRQ_B_PIN 6 - -/* - * GPIO Debug LED - */ - -#define RD88F5182_GPIO_DBG_LED 0 - -/***************************************************************************** - * 16M NOR Flash on Device bus CS1 - ****************************************************************************/ - -static struct physmap_flash_data rd88f5182_nor_flash_data = { - .width = 1, -}; - -static struct resource rd88f5182_nor_flash_resource = { - .flags = IORESOURCE_MEM, - .start = RD88F5182_NOR_BASE, - .end = RD88F5182_NOR_BASE + RD88F5182_NOR_SIZE - 1, -}; - -static struct platform_device rd88f5182_nor_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &rd88f5182_nor_flash_data, - }, - .num_resources = 1, - .resource = &rd88f5182_nor_flash_resource, -}; - -#ifdef CONFIG_LEDS - -/***************************************************************************** - * Use GPIO debug led as CPU active indication - ****************************************************************************/ - -static void rd88f5182_dbgled_event(led_event_t evt) -{ - int val; - - if (evt == led_idle_end) - val = 1; - else if (evt == led_idle_start) - val = 0; - else - return; - - gpio_set_value(RD88F5182_GPIO_DBG_LED, val); -} - -static int __init rd88f5182_dbgled_init(void) -{ - int pin; - - if (machine_is_rd88f5182()) { - pin = RD88F5182_GPIO_DBG_LED; - - if (gpio_request(pin, "DBGLED") == 0) { - if (gpio_direction_output(pin, 0) != 0) { - printk(KERN_ERR "rd88f5182_dbgled_init failed " - "to set output pin %d\n", pin); - gpio_free(pin); - return 0; - } - } else { - printk(KERN_ERR "rd88f5182_dbgled_init failed " - "to request gpio %d\n", pin); - return 0; - } - - leds_event = rd88f5182_dbgled_event; - } - return 0; -} - -__initcall(rd88f5182_dbgled_init); - -#endif - -/***************************************************************************** - * PCI - ****************************************************************************/ - -void __init rd88f5182_pci_preinit(void) -{ - int pin; - - /* - * Configure PCI GPIO IRQ pins - */ - pin = RD88F5182_PCI_SLOT0_IRQ_A_PIN; - if (gpio_request(pin, "PCI IntA") == 0) { - if (gpio_direction_input(pin) == 0) { - set_irq_type(gpio_to_irq(pin), IRQT_LOW); - } else { - printk(KERN_ERR "rd88f5182_pci_preinit faield to " - "set_irq_type pin %d\n", pin); - gpio_free(pin); - } - } else { - printk(KERN_ERR "rd88f5182_pci_preinit failed to request gpio %d\n", pin); - } - - pin = RD88F5182_PCI_SLOT0_IRQ_B_PIN; - if (gpio_request(pin, "PCI IntB") == 0) { - if (gpio_direction_input(pin) == 0) { - set_irq_type(gpio_to_irq(pin), IRQT_LOW); - } else { - printk(KERN_ERR "rd88f5182_pci_preinit faield to " - "set_irq_type pin %d\n", pin); - gpio_free(pin); - } - } else { - printk(KERN_ERR "rd88f5182_pci_preinit failed to gpio_request %d\n", pin); - } -} - -static int __init rd88f5182_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) -{ - /* - * PCI-E isn't used on the RD2 - */ - if (dev->bus->number == orion_pcie_local_bus_nr()) - return IRQ_ORION_PCIE0_INT; - - /* - * PCI IRQs are connected via GPIOs - */ - switch (slot - RD88F5182_PCI_SLOT0_OFFS) { - case 0: - if (pin == 1) - return gpio_to_irq(RD88F5182_PCI_SLOT0_IRQ_A_PIN); - else - return gpio_to_irq(RD88F5182_PCI_SLOT0_IRQ_B_PIN); - default: - return -1; - } -} - -static struct hw_pci rd88f5182_pci __initdata = { - .nr_controllers = 2, - .preinit = rd88f5182_pci_preinit, - .swizzle = pci_std_swizzle, - .setup = orion_pci_sys_setup, - .scan = orion_pci_sys_scan_bus, - .map_irq = rd88f5182_pci_map_irq, -}; - -static int __init rd88f5182_pci_init(void) -{ - if (machine_is_rd88f5182()) - pci_common_init(&rd88f5182_pci); - - return 0; -} - -subsys_initcall(rd88f5182_pci_init); - -/***************************************************************************** - * Ethernet - ****************************************************************************/ - -static struct mv643xx_eth_platform_data rd88f5182_eth_data = { - .phy_addr = 8, - .force_phy_addr = 1, -}; - -/***************************************************************************** - * RTC DS1338 on I2C bus - ****************************************************************************/ -static struct i2c_board_info __initdata rd88f5182_i2c_rtc = { - .driver_name = "rtc-ds1307", - .type = "ds1338", - .addr = 0x68, -}; - -/***************************************************************************** - * Sata - ****************************************************************************/ -static struct mv_sata_platform_data rd88f5182_sata_data = { - .n_ports = 2, -}; - -/***************************************************************************** - * General Setup - ****************************************************************************/ - -static struct platform_device *rd88f5182_devices[] __initdata = { - &rd88f5182_nor_flash, -}; - -static void __init rd88f5182_init(void) -{ - /* - * Setup basic Orion functions. Need to be called early. - */ - orion_init(); - - /* - * Setup the CPU address decode windows for our devices - */ - orion_setup_cpu_win(ORION_DEV_BOOT, RD88F5182_NOR_BOOT_BASE, - RD88F5182_NOR_BOOT_SIZE, -1); - orion_setup_cpu_win(ORION_DEV1, RD88F5182_NOR_BASE, - RD88F5182_NOR_SIZE, -1); - - /* - * Open a special address decode windows for the PCIE WA. - */ - orion_write(ORION_REGS_VIRT_BASE | 0x20074, ORION_PCIE_WA_PHYS_BASE); - orion_write(ORION_REGS_VIRT_BASE | 0x20070, (0x7941 | - (((ORION_PCIE_WA_SIZE >> 16) - 1)) << 16)); - - /* - * Setup Multiplexing Pins -- - * MPP[0] Debug Led (GPIO - Out) - * MPP[1] Debug Led (GPIO - Out) - * MPP[2] N/A - * MPP[3] RTC_Int (GPIO - In) - * MPP[4] GPIO - * MPP[5] GPIO - * MPP[6] PCI_intA (GPIO - In) - * MPP[7] PCI_intB (GPIO - In) - * MPP[8-11] N/A - * MPP[12] SATA 0 presence Indication - * MPP[13] SATA 1 presence Indication - * MPP[14] SATA 0 active Indication - * MPP[15] SATA 1 active indication - * MPP[16-19] Not used - * MPP[20] PCI Clock to MV88F5182 - * MPP[21] PCI Clock to mini PCI CON11 - * MPP[22] USB 0 over current indication - * MPP[23] USB 1 over current indication - * MPP[24] USB 1 over current enable - * MPP[25] USB 0 over current enable - */ - - orion_write(MPP_0_7_CTRL, 0x00000003); - orion_write(MPP_8_15_CTRL, 0x55550000); - orion_write(MPP_16_19_CTRL, 0x5555); - - orion_gpio_set_valid_pins(0x000000fb); - - platform_add_devices(rd88f5182_devices, ARRAY_SIZE(rd88f5182_devices)); - i2c_register_board_info(0, &rd88f5182_i2c_rtc, 1); - orion_eth_init(&rd88f5182_eth_data); - orion_sata_init(&rd88f5182_sata_data); -} - -MACHINE_START(RD88F5182, "Marvell Orion-NAS Reference Design") - /* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */ - .phys_io = ORION_REGS_PHYS_BASE, - .io_pg_offst = ((ORION_REGS_VIRT_BASE) >> 18) & 0xFFFC, - .boot_params = 0x00000100, - .init_machine = rd88f5182_init, - .map_io = orion_map_io, - .init_irq = orion_init_irq, - .timer = &orion_timer, -MACHINE_END diff --git a/arch/arm/mach-orion/time.c b/arch/arm/mach-orion/time.c deleted file mode 100644 index bd4262da4f40..000000000000 --- a/arch/arm/mach-orion/time.c +++ /dev/null @@ -1,181 +0,0 @@ -/* - * arch/arm/mach-orion/time.c - * - * Core time functions for Marvell Orion System On Chip - * - * Maintainer: Tzachi Perelstein <tzachi@marvell.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/clockchips.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <asm/mach/time.h> -#include <asm/arch/orion.h> -#include "common.h" - -/* - * Timer0: clock_event_device, Tick. - * Timer1: clocksource, Free running. - * WatchDog: Not used. - * - * Timers are counting down. - */ -#define CLOCKEVENT 0 -#define CLOCKSOURCE 1 - -/* - * Timers bits - */ -#define BRIDGE_INT_TIMER(x) (1 << ((x) + 1)) -#define TIMER_EN(x) (1 << ((x) * 2)) -#define TIMER_RELOAD_EN(x) (1 << (((x) * 2) + 1)) -#define BRIDGE_INT_TIMER_WD (1 << 3) -#define TIMER_WD_EN (1 << 4) -#define TIMER_WD_RELOAD_EN (1 << 5) - -static cycle_t orion_clksrc_read(void) -{ - return (0xffffffff - orion_read(TIMER_VAL(CLOCKSOURCE))); -} - -static struct clocksource orion_clksrc = { - .name = "orion_clocksource", - .shift = 20, - .rating = 300, - .read = orion_clksrc_read, - .mask = CLOCKSOURCE_MASK(32), - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - -static int -orion_clkevt_next_event(unsigned long delta, struct clock_event_device *dev) -{ - unsigned long flags; - - if (delta == 0) - return -ETIME; - - local_irq_save(flags); - - /* - * Clear and enable timer interrupt bit - */ - orion_write(BRIDGE_CAUSE, ~BRIDGE_INT_TIMER(CLOCKEVENT)); - orion_setbits(BRIDGE_MASK, BRIDGE_INT_TIMER(CLOCKEVENT)); - - /* - * Setup new timer value - */ - orion_write(TIMER_VAL(CLOCKEVENT), delta); - - /* - * Disable auto reload and kickoff the timer - */ - orion_clrbits(TIMER_CTRL, TIMER_RELOAD_EN(CLOCKEVENT)); - orion_setbits(TIMER_CTRL, TIMER_EN(CLOCKEVENT)); - - local_irq_restore(flags); - - return 0; -} - -static void -orion_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev) -{ - unsigned long flags; - - local_irq_save(flags); - - if (mode == CLOCK_EVT_MODE_PERIODIC) { - /* - * Setup latch cycles in timer and enable reload interrupt. - */ - orion_write(TIMER_VAL_RELOAD(CLOCKEVENT), LATCH); - orion_write(TIMER_VAL(CLOCKEVENT), LATCH); - orion_setbits(BRIDGE_MASK, BRIDGE_INT_TIMER(CLOCKEVENT)); - orion_setbits(TIMER_CTRL, TIMER_RELOAD_EN(CLOCKEVENT) | - TIMER_EN(CLOCKEVENT)); - } else { - /* - * Disable timer and interrupt - */ - orion_clrbits(BRIDGE_MASK, BRIDGE_INT_TIMER(CLOCKEVENT)); - orion_write(BRIDGE_CAUSE, ~BRIDGE_INT_TIMER(CLOCKEVENT)); - orion_clrbits(TIMER_CTRL, TIMER_RELOAD_EN(CLOCKEVENT) | - TIMER_EN(CLOCKEVENT)); - } - - local_irq_restore(flags); -} - -static struct clock_event_device orion_clkevt = { - .name = "orion_tick", - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .shift = 32, - .rating = 300, - .cpumask = CPU_MASK_CPU0, - .set_next_event = orion_clkevt_next_event, - .set_mode = orion_clkevt_mode, -}; - -static irqreturn_t orion_timer_interrupt(int irq, void *dev_id) -{ - /* - * Clear cause bit and do event - */ - orion_write(BRIDGE_CAUSE, ~BRIDGE_INT_TIMER(CLOCKEVENT)); - orion_clkevt.event_handler(&orion_clkevt); - return IRQ_HANDLED; -} - -static struct irqaction orion_timer_irq = { - .name = "orion_tick", - .flags = IRQF_DISABLED | IRQF_TIMER, - .handler = orion_timer_interrupt -}; - -static void orion_timer_init(void) -{ - /* - * Setup clocksource free running timer (no interrupt on reload) - */ - orion_write(TIMER_VAL(CLOCKSOURCE), 0xffffffff); - orion_write(TIMER_VAL_RELOAD(CLOCKSOURCE), 0xffffffff); - orion_clrbits(BRIDGE_MASK, BRIDGE_INT_TIMER(CLOCKSOURCE)); - orion_setbits(TIMER_CTRL, TIMER_RELOAD_EN(CLOCKSOURCE) | - TIMER_EN(CLOCKSOURCE)); - - /* - * Register clocksource - */ - orion_clksrc.mult = - clocksource_hz2mult(CLOCK_TICK_RATE, orion_clksrc.shift); - - clocksource_register(&orion_clksrc); - - /* - * Connect and enable tick handler - */ - setup_irq(IRQ_ORION_BRIDGE, &orion_timer_irq); - - /* - * Register clockevent - */ - orion_clkevt.mult = - div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, orion_clkevt.shift); - orion_clkevt.max_delta_ns = - clockevent_delta2ns(0xfffffffe, &orion_clkevt); - orion_clkevt.min_delta_ns = - clockevent_delta2ns(1, &orion_clkevt); - - clockevents_register_device(&orion_clkevt); -} - -struct sys_timer orion_timer = { - .init = orion_timer_init, -}; diff --git a/arch/arm/mach-orion/ts209-setup.c b/arch/arm/mach-orion/ts209-setup.c deleted file mode 100644 index 45764dad16d0..000000000000 --- a/arch/arm/mach-orion/ts209-setup.c +++ /dev/null @@ -1,361 +0,0 @@ -/* - * QNAP TS-109/TS-209 Board Setup - * - * Maintainer: Byron Bradley <byron.bbradley@gmail.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/pci.h> -#include <linux/irq.h> -#include <linux/mtd/physmap.h> -#include <linux/mtd/nand.h> -#include <linux/mv643xx_eth.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> -#include <linux/i2c.h> -#include <linux/serial_reg.h> -#include <linux/ata_platform.h> -#include <asm/mach-types.h> -#include <asm/gpio.h> -#include <asm/mach/arch.h> -#include <asm/mach/pci.h> -#include <asm/arch/orion.h> -#include <asm/arch/platform.h> -#include "common.h" - -#define QNAP_TS209_NOR_BOOT_BASE 0xf4000000 -#define QNAP_TS209_NOR_BOOT_SIZE SZ_8M - -/**************************************************************************** - * 8MiB NOR flash. The struct mtd_partition is not in the same order as the - * partitions on the device because we want to keep compatability with - * existing QNAP firmware. - * - * Layout as used by QNAP: - * [2] 0x00000000-0x00200000 : "Kernel" - * [3] 0x00200000-0x00600000 : "RootFS1" - * [4] 0x00600000-0x00700000 : "RootFS2" - * [6] 0x00700000-0x00760000 : "NAS Config" (read-only) - * [5] 0x00760000-0x00780000 : "U-Boot Config" - * [1] 0x00780000-0x00800000 : "U-Boot" (read-only) - ***************************************************************************/ -static struct mtd_partition qnap_ts209_partitions[] = { - { - .name = "U-Boot", - .size = 0x00080000, - .offset = 0x00780000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "Kernel", - .size = 0x00200000, - .offset = 0, - }, { - .name = "RootFS1", - .size = 0x00400000, - .offset = 0x00200000, - }, { - .name = "RootFS2", - .size = 0x00100000, - .offset = 0x00600000, - }, { - .name = "U-Boot Config", - .size = 0x00020000, - .offset = 0x00760000, - }, { - .name = "NAS Config", - .size = 0x00060000, - .offset = 0x00700000, - .mask_flags = MTD_WRITEABLE, - } -}; - -static struct physmap_flash_data qnap_ts209_nor_flash_data = { - .width = 1, - .parts = qnap_ts209_partitions, - .nr_parts = ARRAY_SIZE(qnap_ts209_partitions) -}; - -static struct resource qnap_ts209_nor_flash_resource = { - .flags = IORESOURCE_MEM, - .start = QNAP_TS209_NOR_BOOT_BASE, - .end = QNAP_TS209_NOR_BOOT_BASE + QNAP_TS209_NOR_BOOT_SIZE - 1, -}; - -static struct platform_device qnap_ts209_nor_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { .platform_data = &qnap_ts209_nor_flash_data, }, - .resource = &qnap_ts209_nor_flash_resource, - .num_resources = 1, -}; - -/***************************************************************************** - * PCI - ****************************************************************************/ - -#define QNAP_TS209_PCI_SLOT0_OFFS 7 -#define QNAP_TS209_PCI_SLOT0_IRQ_PIN 6 -#define QNAP_TS209_PCI_SLOT1_IRQ_PIN 7 - -void __init qnap_ts209_pci_preinit(void) -{ - int pin; - - /* - * Configure PCI GPIO IRQ pins - */ - pin = QNAP_TS209_PCI_SLOT0_IRQ_PIN; - if (gpio_request(pin, "PCI Int1") == 0) { - if (gpio_direction_input(pin) == 0) { - set_irq_type(gpio_to_irq(pin), IRQT_LOW); - } else { - printk(KERN_ERR "qnap_ts209_pci_preinit failed to " - "set_irq_type pin %d\n", pin); - gpio_free(pin); - } - } else { - printk(KERN_ERR "qnap_ts209_pci_preinit failed to gpio_request " - "%d\n", pin); - } - - pin = QNAP_TS209_PCI_SLOT1_IRQ_PIN; - if (gpio_request(pin, "PCI Int2") == 0) { - if (gpio_direction_input(pin) == 0) { - set_irq_type(gpio_to_irq(pin), IRQT_LOW); - } else { - printk(KERN_ERR "qnap_ts209_pci_preinit failed " - "to set_irq_type pin %d\n", pin); - gpio_free(pin); - } - } else { - printk(KERN_ERR "qnap_ts209_pci_preinit failed to gpio_request " - "%d\n", pin); - } -} - -static int __init qnap_ts209_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) -{ - /* - * PCIE IRQ is connected internally (not GPIO) - */ - if (dev->bus->number == orion_pcie_local_bus_nr()) - return IRQ_ORION_PCIE0_INT; - - /* - * PCI IRQs are connected via GPIOs - */ - switch (slot - QNAP_TS209_PCI_SLOT0_OFFS) { - case 0: - return gpio_to_irq(QNAP_TS209_PCI_SLOT0_IRQ_PIN); - case 1: - return gpio_to_irq(QNAP_TS209_PCI_SLOT1_IRQ_PIN); - default: - return -1; - } -} - -static struct hw_pci qnap_ts209_pci __initdata = { - .nr_controllers = 2, - .preinit = qnap_ts209_pci_preinit, - .swizzle = pci_std_swizzle, - .setup = orion_pci_sys_setup, - .scan = orion_pci_sys_scan_bus, - .map_irq = qnap_ts209_pci_map_irq, -}; - -static int __init qnap_ts209_pci_init(void) -{ - if (machine_is_ts_x09()) - pci_common_init(&qnap_ts209_pci); - - return 0; -} - -subsys_initcall(qnap_ts209_pci_init); - -/***************************************************************************** - * Ethernet - ****************************************************************************/ - -static struct mv643xx_eth_platform_data qnap_ts209_eth_data = { - .phy_addr = 8, - .force_phy_addr = 1, -}; - -/***************************************************************************** - * RTC S35390A on I2C bus - ****************************************************************************/ - -#define TS209_RTC_GPIO 3 - -static struct i2c_board_info __initdata qnap_ts209_i2c_rtc = { - .driver_name = "rtc-s35390a", - .addr = 0x30, - .irq = 0, -}; - -/**************************************************************************** - * GPIO Attached Keys - * Power button is attached to the PIC microcontroller - ****************************************************************************/ - -#define QNAP_TS209_GPIO_KEY_MEDIA 1 -#define QNAP_TS209_GPIO_KEY_RESET 2 - -static struct gpio_keys_button qnap_ts209_buttons[] = { - { - .code = KEY_RESTART, - .gpio = QNAP_TS209_GPIO_KEY_MEDIA, - .desc = "USB Copy Button", - .active_low = 1, - }, - { - .code = KEY_POWER, - .gpio = QNAP_TS209_GPIO_KEY_RESET, - .desc = "Reset Button", - .active_low = 1, - } -}; - -static struct gpio_keys_platform_data qnap_ts209_button_data = { - .buttons = qnap_ts209_buttons, - .nbuttons = ARRAY_SIZE(qnap_ts209_buttons), -}; - -static struct platform_device qnap_ts209_button_device = { - .name = "gpio-keys", - .id = -1, - .num_resources = 0, - .dev = { .platform_data = &qnap_ts209_button_data, }, -}; - -/***************************************************************************** - * SATA - ****************************************************************************/ -static struct mv_sata_platform_data qnap_ts209_sata_data = { - .n_ports = 2, -}; - -/***************************************************************************** - - * General Setup - ****************************************************************************/ - -static struct platform_device *qnap_ts209_devices[] __initdata = { - &qnap_ts209_nor_flash, - &qnap_ts209_button_device, -}; - -/* - * QNAP TS-[12]09 specific power off method via UART1-attached PIC - */ - -#define UART1_REG(x) (UART1_VIRT_BASE + ((UART_##x) << 2)) - -static void qnap_ts209_power_off(void) -{ - /* 19200 baud divisor */ - const unsigned divisor = ((ORION_TCLK + (8 * 19200)) / (16 * 19200)); - - pr_info("%s: triggering power-off...\n", __func__); - - /* hijack uart1 and reset into sane state (19200,8n1) */ - orion_write(UART1_REG(LCR), 0x83); - orion_write(UART1_REG(DLL), divisor & 0xff); - orion_write(UART1_REG(DLM), (divisor >> 8) & 0xff); - orion_write(UART1_REG(LCR), 0x03); - orion_write(UART1_REG(IER), 0x00); - orion_write(UART1_REG(FCR), 0x00); - orion_write(UART1_REG(MCR), 0x00); - - /* send the power-off command 'A' to PIC */ - orion_write(UART1_REG(TX), 'A'); -} - -static void __init qnap_ts209_init(void) -{ - /* - * Setup basic Orion functions. Need to be called early. - */ - orion_init(); - - /* - * Setup flash mapping - */ - orion_setup_cpu_win(ORION_DEV_BOOT, QNAP_TS209_NOR_BOOT_BASE, - QNAP_TS209_NOR_BOOT_SIZE, -1); - - /* - * Open a special address decode windows for the PCIE WA. - */ - orion_write(ORION_REGS_VIRT_BASE | 0x20074, ORION_PCIE_WA_PHYS_BASE); - orion_write(ORION_REGS_VIRT_BASE | 0x20070, (0x7941 | - (((ORION_PCIE_WA_SIZE >> 16) - 1)) << 16)); - - /* - * Setup Multiplexing Pins -- - * MPP[0] Reserved - * MPP[1] USB copy button (0 active) - * MPP[2] Load defaults button (0 active) - * MPP[3] GPIO RTC - * MPP[4-5] Reserved - * MPP[6] PCI Int A - * MPP[7] PCI Int B - * MPP[8-11] Reserved - * MPP[12] SATA 0 presence - * MPP[13] SATA 1 presence - * MPP[14] SATA 0 active - * MPP[15] SATA 1 active - * MPP[16] UART1 RXD - * MPP[17] UART1 TXD - * MPP[18] SW_RST (0 active) - * MPP[19] Reserved - * MPP[20] PCI clock 0 - * MPP[21] PCI clock 1 - * MPP[22] USB 0 over current - * MPP[23-25] Reserved - */ - orion_write(MPP_0_7_CTRL, 0x3); - orion_write(MPP_8_15_CTRL, 0x55550000); - orion_write(MPP_16_19_CTRL, 0x5500); - orion_gpio_set_valid_pins(0x3cc0fff); - - /* register ts209 specific power-off method */ - pm_power_off = qnap_ts209_power_off; - - platform_add_devices(qnap_ts209_devices, - ARRAY_SIZE(qnap_ts209_devices)); - - /* Get RTC IRQ and register the chip */ - if (gpio_request(TS209_RTC_GPIO, "rtc") == 0) { - if (gpio_direction_input(TS209_RTC_GPIO) == 0) - qnap_ts209_i2c_rtc.irq = gpio_to_irq(TS209_RTC_GPIO); - else - gpio_free(TS209_RTC_GPIO); - } - if (qnap_ts209_i2c_rtc.irq == 0) - pr_warning("qnap_ts209_init: failed to get RTC IRQ\n"); - i2c_register_board_info(0, &qnap_ts209_i2c_rtc, 1); - - orion_eth_init(&qnap_ts209_eth_data); - orion_sata_init(&qnap_ts209_sata_data); -} - -MACHINE_START(TS209, "QNAP TS-109/TS-209") - /* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */ - .phys_io = ORION_REGS_PHYS_BASE, - .io_pg_offst = ((ORION_REGS_VIRT_BASE) >> 18) & 0xFFFC, - .boot_params = 0x00000100, - .init_machine = qnap_ts209_init, - .map_io = orion_map_io, - .init_irq = orion_init_irq, - .timer = &orion_timer, - .fixup = tag_fixup_mem32, -MACHINE_END |