diff options
Diffstat (limited to '')
76 files changed, 524 insertions, 733 deletions
diff --git a/arch/arm/mach-pxa/am200epd.c b/arch/arm/mach-pxa/am200epd.c index 3499fada73ae..4cb069fd9af2 100644 --- a/arch/arm/mach-pxa/am200epd.c +++ b/arch/arm/mach-pxa/am200epd.c @@ -128,8 +128,8 @@ static int am200_init_gpio_regs(struct metronomefb_par *par) return 0; err_req_gpio: - while (i > 0) - gpio_free(gpios[i--]); + while (--i >= 0) + gpio_free(gpios[i]); return err; } @@ -194,7 +194,7 @@ static struct notifier_block am200_fb_notif = { }; /* this gets called as part of our init. these steps must be done now so - * that we can use set_pxa_fb_info */ + * that we can use pxa_set_fb_info */ static void __init am200_presetup_fb(void) { int fw; @@ -249,7 +249,7 @@ static void __init am200_presetup_fb(void) /* we divide since we told the LCD controller we're 16bpp */ am200_fb_info.modes->xres /= 2; - set_pxa_fb_info(&am200_fb_info); + pxa_set_fb_info(NULL, &am200_fb_info); } diff --git a/arch/arm/mach-pxa/am300epd.c b/arch/arm/mach-pxa/am300epd.c index 993d75e66390..fa8bad235d9f 100644 --- a/arch/arm/mach-pxa/am300epd.c +++ b/arch/arm/mach-pxa/am300epd.c @@ -125,10 +125,7 @@ static int am300_init_gpio_regs(struct broadsheetfb_par *par) if (err) { dev_err(&am300_device->dev, "failed requesting " "gpio %d, err=%d\n", i, err); - while (i >= DB0_GPIO_PIN) - gpio_free(i--); - i = ARRAY_SIZE(gpios) - 1; - goto err_req_gpio; + goto err_req_gpio2; } } @@ -159,9 +156,13 @@ static int am300_init_gpio_regs(struct broadsheetfb_par *par) return 0; +err_req_gpio2: + while (--i >= DB0_GPIO_PIN) + gpio_free(i); + i = ARRAY_SIZE(gpios); err_req_gpio: - while (i > 0) - gpio_free(gpios[i--]); + while (--i >= 0) + gpio_free(gpios[i]); return err; } diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c index a134a1413e01..810a982a66f8 100644 --- a/arch/arm/mach-pxa/balloon3.c +++ b/arch/arm/mach-pxa/balloon3.c @@ -15,7 +15,6 @@ #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/sysdev.h> #include <linux/interrupt.h> #include <linux/sched.h> #include <linux/bitops.h> @@ -27,6 +26,7 @@ #include <linux/mtd/partitions.h> #include <linux/types.h> #include <linux/i2c/pcf857x.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/mtd/nand.h> #include <linux/mtd/physmap.h> #include <linux/regulator/max1586.h> @@ -51,8 +51,6 @@ #include <mach/irda.h> #include <mach/ohci.h> -#include <plat/i2c.h> - #include "generic.h" #include "devices.h" @@ -264,7 +262,7 @@ static void __init balloon3_lcd_init(void) } balloon3_lcd_screen.pxafb_backlight_power = balloon3_backlight_power; - set_pxa_fb_info(&balloon3_lcd_screen); + pxa_set_fb_info(NULL, &balloon3_lcd_screen); return; err2: @@ -528,13 +526,13 @@ static void __init balloon3_init_irq(void) pxa27x_init_irq(); /* setup extra Balloon3 irqs */ for (irq = BALLOON3_IRQ(0); irq <= BALLOON3_IRQ(7); irq++) { - set_irq_chip(irq, &balloon3_irq_chip); - set_irq_handler(irq, handle_level_irq); + irq_set_chip_and_handler(irq, &balloon3_irq_chip, + handle_level_irq); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } - set_irq_chained_handler(BALLOON3_AUX_NIRQ, balloon3_irq_handler); - set_irq_type(BALLOON3_AUX_NIRQ, IRQ_TYPE_EDGE_FALLING); + irq_set_chained_handler(BALLOON3_AUX_NIRQ, balloon3_irq_handler); + irq_set_irq_type(BALLOON3_AUX_NIRQ, IRQ_TYPE_EDGE_FALLING); pr_debug("%s: chained handler installed - irq %d automatically " "enabled\n", __func__, BALLOON3_AUX_NIRQ); @@ -829,5 +827,5 @@ MACHINE_START(BALLOON3, "Balloon3") .init_irq = balloon3_init_irq, .timer = &pxa_timer, .init_machine = balloon3_init, - .boot_params = PHYS_OFFSET + 0x100, + .boot_params = PLAT_PHYS_OFFSET + 0x100, MACHINE_END diff --git a/arch/arm/mach-pxa/clock-pxa2xx.c b/arch/arm/mach-pxa/clock-pxa2xx.c index 1ce090448493..1d5859d9a0e3 100644 --- a/arch/arm/mach-pxa/clock-pxa2xx.c +++ b/arch/arm/mach-pxa/clock-pxa2xx.c @@ -9,7 +9,7 @@ #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> -#include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <mach/pxa2xx-regs.h> @@ -33,32 +33,22 @@ const struct clkops clk_pxa2xx_cken_ops = { #ifdef CONFIG_PM static uint32_t saved_cken; -static int pxa2xx_clock_suspend(struct sys_device *d, pm_message_t state) +static int pxa2xx_clock_suspend(void) { saved_cken = CKEN; return 0; } -static int pxa2xx_clock_resume(struct sys_device *d) +static void pxa2xx_clock_resume(void) { CKEN = saved_cken; - return 0; } #else #define pxa2xx_clock_suspend NULL #define pxa2xx_clock_resume NULL #endif -struct sysdev_class pxa2xx_clock_sysclass = { - .name = "pxa2xx-clock", +struct syscore_ops pxa2xx_clock_syscore_ops = { .suspend = pxa2xx_clock_suspend, .resume = pxa2xx_clock_resume, }; - -static int __init pxa2xx_clock_init(void) -{ - if (cpu_is_pxa2xx()) - return sysdev_class_register(&pxa2xx_clock_sysclass); - return 0; -} -postcore_initcall(pxa2xx_clock_init); diff --git a/arch/arm/mach-pxa/clock-pxa3xx.c b/arch/arm/mach-pxa/clock-pxa3xx.c index 3f864cd0bd28..2a37a9a8f621 100644 --- a/arch/arm/mach-pxa/clock-pxa3xx.c +++ b/arch/arm/mach-pxa/clock-pxa3xx.c @@ -10,6 +10,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/io.h> +#include <linux/syscore_ops.h> #include <mach/smemc.h> #include <mach/pxa3xx-regs.h> @@ -182,7 +183,7 @@ const struct clkops clk_pxa3xx_pout_ops = { static uint32_t cken[2]; static uint32_t accr; -static int pxa3xx_clock_suspend(struct sys_device *d, pm_message_t state) +static int pxa3xx_clock_suspend(void) { cken[0] = CKENA; cken[1] = CKENB; @@ -190,28 +191,18 @@ static int pxa3xx_clock_suspend(struct sys_device *d, pm_message_t state) return 0; } -static int pxa3xx_clock_resume(struct sys_device *d) +static void pxa3xx_clock_resume(void) { ACCR = accr; CKENA = cken[0]; CKENB = cken[1]; - return 0; } #else #define pxa3xx_clock_suspend NULL #define pxa3xx_clock_resume NULL #endif -struct sysdev_class pxa3xx_clock_sysclass = { - .name = "pxa3xx-clock", +struct syscore_ops pxa3xx_clock_syscore_ops = { .suspend = pxa3xx_clock_suspend, .resume = pxa3xx_clock_resume, }; - -static int __init pxa3xx_clock_init(void) -{ - if (cpu_is_pxa3xx() || cpu_is_pxa95x()) - return sysdev_class_register(&pxa3xx_clock_sysclass); - return 0; -} -postcore_initcall(pxa3xx_clock_init); diff --git a/arch/arm/mach-pxa/clock.h b/arch/arm/mach-pxa/clock.h index f9f349a21b54..1f2fb9c43f06 100644 --- a/arch/arm/mach-pxa/clock.h +++ b/arch/arm/mach-pxa/clock.h @@ -1,5 +1,5 @@ #include <linux/clkdev.h> -#include <linux/sysdev.h> +#include <linux/syscore_ops.h> struct clkops { void (*enable)(struct clk *); @@ -54,7 +54,7 @@ extern const struct clkops clk_pxa2xx_cken_ops; void clk_pxa2xx_cken_enable(struct clk *clk); void clk_pxa2xx_cken_disable(struct clk *clk); -extern struct sysdev_class pxa2xx_clock_sysclass; +extern struct syscore_ops pxa2xx_clock_syscore_ops; #if defined(CONFIG_PXA3xx) || defined(CONFIG_PXA95x) #define DEFINE_PXA3_CKEN(_name, _cken, _rate, _delay) \ @@ -74,5 +74,6 @@ extern const struct clkops clk_pxa3xx_smemc_ops; extern void clk_pxa3xx_cken_enable(struct clk *); extern void clk_pxa3xx_cken_disable(struct clk *); -extern struct sysdev_class pxa3xx_clock_sysclass; +extern struct syscore_ops pxa3xx_clock_syscore_ops; + #endif diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c index b88d601a8090..13518a705399 100644 --- a/arch/arm/mach-pxa/cm-x270.c +++ b/arch/arm/mach-pxa/cm-x270.c @@ -10,7 +10,6 @@ */ #include <linux/platform_device.h> -#include <linux/sysdev.h> #include <linux/irq.h> #include <linux/gpio.h> #include <linux/delay.h> diff --git a/arch/arm/mach-pxa/cm-x2xx-pci.c b/arch/arm/mach-pxa/cm-x2xx-pci.c index a2380cd76f80..8b1a30959fae 100644 --- a/arch/arm/mach-pxa/cm-x2xx-pci.c +++ b/arch/arm/mach-pxa/cm-x2xx-pci.c @@ -70,9 +70,10 @@ void __cmx2xx_pci_init_irq(int irq_gpio) cmx2xx_it8152_irq_gpio = irq_gpio; - set_irq_type(gpio_to_irq(irq_gpio), IRQ_TYPE_EDGE_RISING); + irq_set_irq_type(gpio_to_irq(irq_gpio), IRQ_TYPE_EDGE_RISING); - set_irq_chained_handler(gpio_to_irq(irq_gpio), cmx2xx_it8152_irq_demux); + irq_set_chained_handler(gpio_to_irq(irq_gpio), + cmx2xx_it8152_irq_demux); } #ifdef CONFIG_PM diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c index b734d8468168..a10996782476 100644 --- a/arch/arm/mach-pxa/cm-x2xx.c +++ b/arch/arm/mach-pxa/cm-x2xx.c @@ -10,7 +10,7 @@ */ #include <linux/platform_device.h> -#include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <linux/irq.h> #include <linux/gpio.h> @@ -379,7 +379,7 @@ __setup("monitor=", cmx2xx_set_display); static void __init cmx2xx_init_display(void) { - set_pxa_fb_info(cmx2xx_display); + pxa_set_fb_info(NULL, cmx2xx_display); } #else static inline void cmx2xx_init_display(void) {} @@ -388,7 +388,7 @@ static inline void cmx2xx_init_display(void) {} #ifdef CONFIG_PM static unsigned long sleep_save_msc[10]; -static int cmx2xx_suspend(struct sys_device *dev, pm_message_t state) +static int cmx2xx_suspend(void) { cmx2xx_pci_suspend(); @@ -412,7 +412,7 @@ static int cmx2xx_suspend(struct sys_device *dev, pm_message_t state) return 0; } -static int cmx2xx_resume(struct sys_device *dev) +static void cmx2xx_resume(void) { cmx2xx_pci_resume(); @@ -420,27 +420,18 @@ static int cmx2xx_resume(struct sys_device *dev) __raw_writel(sleep_save_msc[0], MSC0); __raw_writel(sleep_save_msc[1], MSC1); __raw_writel(sleep_save_msc[2], MSC2); - - return 0; } -static struct sysdev_class cmx2xx_pm_sysclass = { - .name = "pm", +static struct syscore_ops cmx2xx_pm_syscore_ops = { .resume = cmx2xx_resume, .suspend = cmx2xx_suspend, }; -static struct sys_device cmx2xx_pm_device = { - .cls = &cmx2xx_pm_sysclass, -}; - static int __init cmx2xx_pm_init(void) { - int error; - error = sysdev_class_register(&cmx2xx_pm_sysclass); - if (error == 0) - error = sysdev_register(&cmx2xx_pm_device); - return error; + register_syscore_ops(&cmx2xx_pm_syscore_ops); + + return 0; } #else static int __init cmx2xx_pm_init(void) { return 0; } diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c index 7984268508b6..b2248e76ec8b 100644 --- a/arch/arm/mach-pxa/cm-x300.c +++ b/arch/arm/mach-pxa/cm-x300.c @@ -29,6 +29,7 @@ #include <linux/i2c.h> #include <linux/i2c/pca953x.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/mfd/da903x.h> #include <linux/regulator/machine.h> @@ -48,7 +49,6 @@ #include <mach/pxafb.h> #include <mach/mmc.h> #include <mach/ohci.h> -#include <plat/i2c.h> #include <plat/pxa3xx_nand.h> #include <mach/audio.h> #include <mach/pxa3xx-u2d.h> @@ -296,7 +296,7 @@ static struct pxafb_mach_info cm_x300_lcd = { static void __init cm_x300_init_lcd(void) { - set_pxa_fb_info(&cm_x300_lcd); + pxa_set_fb_info(NULL, &cm_x300_lcd); } #else static inline void cm_x300_init_lcd(void) {} @@ -765,7 +765,7 @@ static void __init cm_x300_init_da9030(void) { pxa3xx_set_i2c_power_info(&cm_x300_pwr_i2c_info); i2c_register_board_info(1, &cm_x300_pmic_info, 1); - set_irq_wake(IRQ_WAKEUP0, 1); + irq_set_irq_wake(IRQ_WAKEUP0, 1); } static void __init cm_x300_init_wi2wi(void) diff --git a/arch/arm/mach-pxa/colibri-evalboard.c b/arch/arm/mach-pxa/colibri-evalboard.c index 28f667e52ef9..d28e802e2448 100644 --- a/arch/arm/mach-pxa/colibri-evalboard.c +++ b/arch/arm/mach-pxa/colibri-evalboard.c @@ -13,13 +13,13 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/platform_device.h> -#include <linux/sysdev.h> #include <linux/interrupt.h> #include <linux/gpio.h> #include <asm/mach-types.h> #include <mach/hardware.h> #include <asm/mach/arch.h> #include <linux/i2c.h> +#include <linux/i2c/pxa-i2c.h> #include <mach/pxa27x.h> #include <mach/colibri.h> @@ -27,8 +27,6 @@ #include <mach/ohci.h> #include <mach/pxa27x-udc.h> -#include <plat/i2c.h> - #include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/colibri-pxa270-income.c b/arch/arm/mach-pxa/colibri-pxa270-income.c index 07b62a096f17..80538b8806ed 100644 --- a/arch/arm/mach-pxa/colibri-pxa270-income.c +++ b/arch/arm/mach-pxa/colibri-pxa270-income.c @@ -21,7 +21,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/pwm_backlight.h> -#include <linux/sysdev.h> +#include <linux/i2c/pxa-i2c.h> #include <asm/irq.h> #include <asm/mach-types.h> @@ -33,8 +33,6 @@ #include <mach/pxa27x-udc.h> #include <mach/pxafb.h> -#include <plat/i2c.h> - #include "devices.h" #include "generic.h" @@ -176,7 +174,7 @@ static struct pxafb_mach_info income_lcd_screen = { static void __init income_lcd_init(void) { - set_pxa_fb_info(&income_lcd_screen); + pxa_set_fb_info(NULL, &income_lcd_screen); } #else static inline void income_lcd_init(void) {} diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c index 6fc5d328ba7f..7545a48ed88b 100644 --- a/arch/arm/mach-pxa/colibri-pxa270.c +++ b/arch/arm/mach-pxa/colibri-pxa270.c @@ -17,7 +17,6 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> #include <linux/platform_device.h> -#include <linux/sysdev.h> #include <linux/ucb1400.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c index 96b2d9fbfef0..3f9be419959d 100644 --- a/arch/arm/mach-pxa/colibri-pxa3xx.c +++ b/arch/arm/mach-pxa/colibri-pxa3xx.c @@ -105,7 +105,7 @@ void __init colibri_pxa3xx_init_lcd(int bl_pin) lcd_bl_pin = bl_pin; gpio_request(bl_pin, "lcd backlight"); gpio_direction_output(bl_pin, 0); - set_pxa_fb_info(&sharp_lq43_info); + pxa_set_fb_info(NULL, &sharp_lq43_info); } #endif diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index a5452a3a276d..3a5507e31919 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -24,6 +24,7 @@ #include <linux/gpio.h> #include <linux/backlight.h> #include <linux/i2c.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/io.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> @@ -45,7 +46,6 @@ #include <asm/mach/irq.h> #include <mach/pxa25x.h> -#include <plat/i2c.h> #include <mach/irda.h> #include <mach/mmc.h> #include <mach/udc.h> @@ -462,7 +462,6 @@ static struct pxaficp_platform_data corgi_ficp_platform_data = { * USB Device Controller */ static struct pxa2xx_udc_mach_info udc_info __initdata = { - .gpio_vbus = -1, /* no connect GPIO; corgi can't tell connection status */ .gpio_pullup = CORGI_GPIO_USB_PULLUP, }; diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c index a305424a967d..0481c29a70e8 100644 --- a/arch/arm/mach-pxa/csb726.c +++ b/arch/arm/mach-pxa/csb726.c @@ -17,12 +17,12 @@ #include <linux/mtd/partitions.h> #include <linux/sm501.h> #include <linux/smsc911x.h> +#include <linux/i2c/pxa-i2c.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <mach/csb726.h> #include <mach/mfp-pxa27x.h> -#include <plat/i2c.h> #include <mach/mmc.h> #include <mach/ohci.h> #include <mach/pxa2xx-regs.h> diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index 4c766e3b4af3..2e0425404de5 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -4,6 +4,7 @@ #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/spi/pxa2xx_spi.h> +#include <linux/i2c/pxa-i2c.h> #include <asm/pmu.h> #include <mach/udc.h> @@ -16,7 +17,6 @@ #include <mach/camera.h> #include <mach/audio.h> #include <mach/hardware.h> -#include <plat/i2c.h> #include <plat/pxa3xx_nand.h> #include "devices.h" @@ -90,7 +90,6 @@ void __init pxa_set_mci_info(struct pxamci_platform_data *info) static struct pxa2xx_udc_mach_info pxa_udc_info = { .gpio_pullup = -1, - .gpio_vbus = -1, }; void __init pxa_set_udc_info(struct pxa2xx_udc_mach_info *info) @@ -188,16 +187,12 @@ struct platform_device pxa_device_fb = { .resource = pxafb_resources, }; -void __init set_pxa_fb_info(struct pxafb_mach_info *info) +void __init pxa_set_fb_info(struct device *parent, struct pxafb_mach_info *info) { + pxa_device_fb.dev.parent = parent; pxa_register_device(&pxa_device_fb, info); } -void __init set_pxa_fb_parent(struct device *parent_dev) -{ - pxa_device_fb.dev.parent = parent_dev; -} - static struct resource pxa_resource_ffuart[] = { { .start = 0x40100000, diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index a78bb3097739..f8a6e9d79a3a 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -31,6 +31,7 @@ #include <linux/apm-emulation.h> #include <linux/i2c.h> #include <linux/i2c/pca953x.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/regulator/userspace-consumer.h> #include <media/soc_camera.h> @@ -45,7 +46,6 @@ #include <mach/ohci.h> #include <mach/mmc.h> #include <plat/pxa27x_keypad.h> -#include <plat/i2c.h> #include <mach/camera.h> #include "generic.h" @@ -689,7 +689,7 @@ static struct pxafb_mach_info em_x270_lcd = { static void __init em_x270_init_lcd(void) { - set_pxa_fb_info(&em_x270_lcd); + pxa_set_fb_info(NULL, &em_x270_lcd); } #else static inline void em_x270_init_lcd(void) {} diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c index edca0a043293..2e3970fdde0b 100644 --- a/arch/arm/mach-pxa/eseries.c +++ b/arch/arm/mach-pxa/eseries.c @@ -20,6 +20,7 @@ #include <linux/mfd/t7l66xb.h> #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> +#include <linux/usb/gpio_vbus.h> #include <video/w100fb.h> @@ -51,12 +52,20 @@ void __init eseries_fixup(struct machine_desc *desc, mi->bank[0].size = (64*1024*1024); } -struct pxa2xx_udc_mach_info e7xx_udc_mach_info = { +struct gpio_vbus_mach_info e7xx_udc_info = { .gpio_vbus = GPIO_E7XX_USB_DISC, .gpio_pullup = GPIO_E7XX_USB_PULLUP, .gpio_pullup_inverted = 1 }; +static struct platform_device e7xx_gpio_vbus = { + .name = "gpio-vbus", + .id = -1, + .dev = { + .platform_data = &e7xx_udc_info, + }, +}; + struct pxaficp_platform_data e7xx_ficp_platform_data = { .gpio_pwdown = GPIO_E7XX_IR_OFF, .transceiver_cap = IR_SIRMODE | IR_OFF, @@ -165,6 +174,7 @@ static struct platform_device e330_tc6387xb_device = { static struct platform_device *e330_devices[] __initdata = { &e330_tc6387xb_device, + &e7xx_gpio_vbus, }; static void __init e330_init(void) @@ -175,7 +185,6 @@ static void __init e330_init(void) eseries_register_clks(); eseries_get_tmio_gpios(); platform_add_devices(ARRAY_AND_SIZE(e330_devices)); - pxa_set_udc_info(&e7xx_udc_mach_info); } MACHINE_START(E330, "Toshiba e330") @@ -214,6 +223,7 @@ static struct platform_device e350_t7l66xb_device = { static struct platform_device *e350_devices[] __initdata = { &e350_t7l66xb_device, + &e7xx_gpio_vbus, }; static void __init e350_init(void) @@ -224,7 +234,6 @@ static void __init e350_init(void) eseries_register_clks(); eseries_get_tmio_gpios(); platform_add_devices(ARRAY_AND_SIZE(e350_devices)); - pxa_set_udc_info(&e7xx_udc_mach_info); } MACHINE_START(E350, "Toshiba e350") @@ -333,6 +342,7 @@ static struct platform_device e400_t7l66xb_device = { static struct platform_device *e400_devices[] __initdata = { &e400_t7l66xb_device, + &e7xx_gpio_vbus, }; static void __init e400_init(void) @@ -344,9 +354,8 @@ static void __init e400_init(void) /* Fixme - e400 may have a switched clock */ eseries_register_clks(); eseries_get_tmio_gpios(); - set_pxa_fb_info(&e400_pxafb_mach_info); + pxa_set_fb_info(NULL, &e400_pxafb_mach_info); platform_add_devices(ARRAY_AND_SIZE(e400_devices)); - pxa_set_udc_info(&e7xx_udc_mach_info); } MACHINE_START(E400, "Toshiba e400") @@ -519,6 +528,7 @@ static struct platform_device e740_t7l66xb_device = { static struct platform_device *e740_devices[] __initdata = { &e740_fb_device, &e740_t7l66xb_device, + &e7xx_gpio_vbus, }; static void __init e740_init(void) @@ -532,7 +542,6 @@ static void __init e740_init(void) "UDCCLK", &pxa25x_device_udc.dev), eseries_get_tmio_gpios(); platform_add_devices(ARRAY_AND_SIZE(e740_devices)); - pxa_set_udc_info(&e7xx_udc_mach_info); pxa_set_ac97_info(NULL); pxa_set_ficp_info(&e7xx_ficp_platform_data); } @@ -711,6 +720,7 @@ static struct platform_device e750_tc6393xb_device = { static struct platform_device *e750_devices[] __initdata = { &e750_fb_device, &e750_tc6393xb_device, + &e7xx_gpio_vbus, }; static void __init e750_init(void) @@ -723,7 +733,6 @@ static void __init e750_init(void) "GPIO11_CLK", NULL), eseries_get_tmio_gpios(); platform_add_devices(ARRAY_AND_SIZE(e750_devices)); - pxa_set_udc_info(&e7xx_udc_mach_info); pxa_set_ac97_info(NULL); pxa_set_ficp_info(&e7xx_ficp_platform_data); } @@ -873,12 +882,21 @@ static struct platform_device e800_fb_device = { /* --------------------------- UDC definitions --------------------------- */ -static struct pxa2xx_udc_mach_info e800_udc_mach_info = { +static struct gpio_vbus_mach_info e800_udc_info = { .gpio_vbus = GPIO_E800_USB_DISC, .gpio_pullup = GPIO_E800_USB_PULLUP, .gpio_pullup_inverted = 1 }; +static struct platform_device e800_gpio_vbus = { + .name = "gpio-vbus", + .id = -1, + .dev = { + .platform_data = &e800_udc_info, + }, +}; + + /* ----------------- e800 tc6393xb parameters ------------------ */ static struct tc6393xb_platform_data e800_tc6393xb_info = { @@ -907,6 +925,7 @@ static struct platform_device e800_tc6393xb_device = { static struct platform_device *e800_devices[] __initdata = { &e800_fb_device, &e800_tc6393xb_device, + &e800_gpio_vbus, }; static void __init e800_init(void) @@ -919,7 +938,6 @@ static void __init e800_init(void) "GPIO11_CLK", NULL), eseries_get_tmio_gpios(); platform_add_devices(ARRAY_AND_SIZE(e800_devices)); - pxa_set_udc_info(&e800_udc_mach_info); pxa_set_ac97_info(NULL); } diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c index 87cec0abe5b0..d88aed8fbe15 100644 --- a/arch/arm/mach-pxa/ezx.c +++ b/arch/arm/mach-pxa/ezx.c @@ -20,6 +20,7 @@ #include <linux/gpio.h> #include <linux/gpio_keys.h> #include <linux/leds-lp3944.h> +#include <linux/i2c/pxa-i2c.h> #include <media/soc_camera.h> @@ -30,7 +31,6 @@ #include <mach/pxa27x.h> #include <mach/pxafb.h> #include <mach/ohci.h> -#include <plat/i2c.h> #include <mach/hardware.h> #include <plat/pxa27x_keypad.h> #include <mach/camera.h> @@ -783,7 +783,7 @@ static void __init a780_init(void) pxa_set_i2c_info(NULL); - set_pxa_fb_info(&ezx_fb_info_1); + pxa_set_fb_info(NULL, &ezx_fb_info_1); pxa_set_keypad_info(&a780_keypad_platform_data); @@ -853,7 +853,7 @@ static void __init e680_init(void) pxa_set_i2c_info(NULL); i2c_register_board_info(0, ARRAY_AND_SIZE(e680_i2c_board_info)); - set_pxa_fb_info(&ezx_fb_info_1); + pxa_set_fb_info(NULL, &ezx_fb_info_1); pxa_set_keypad_info(&e680_keypad_platform_data); @@ -918,7 +918,7 @@ static void __init a1200_init(void) pxa_set_i2c_info(NULL); i2c_register_board_info(0, ARRAY_AND_SIZE(a1200_i2c_board_info)); - set_pxa_fb_info(&ezx_fb_info_2); + pxa_set_fb_info(NULL, &ezx_fb_info_2); pxa_set_keypad_info(&a1200_keypad_platform_data); @@ -1103,7 +1103,7 @@ static void __init a910_init(void) pxa_set_i2c_info(NULL); i2c_register_board_info(0, ARRAY_AND_SIZE(a910_i2c_board_info)); - set_pxa_fb_info(&ezx_fb_info_2); + pxa_set_fb_info(NULL, &ezx_fb_info_2); pxa_set_keypad_info(&a910_keypad_platform_data); @@ -1173,7 +1173,7 @@ static void __init e6_init(void) pxa_set_i2c_info(NULL); i2c_register_board_info(0, ARRAY_AND_SIZE(e6_i2c_board_info)); - set_pxa_fb_info(&ezx_fb_info_2); + pxa_set_fb_info(NULL, &ezx_fb_info_2); pxa_set_keypad_info(&e6_keypad_platform_data); @@ -1212,7 +1212,7 @@ static void __init e2_init(void) pxa_set_i2c_info(NULL); i2c_register_board_info(0, ARRAY_AND_SIZE(e2_i2c_board_info)); - set_pxa_fb_info(&ezx_fb_info_2); + pxa_set_fb_info(NULL, &ezx_fb_info_2); pxa_set_keypad_info(&e2_keypad_platform_data); diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h index a079d8baa45a..e6c9344a95ae 100644 --- a/arch/arm/mach-pxa/generic.h +++ b/arch/arm/mach-pxa/generic.h @@ -61,10 +61,10 @@ extern unsigned pxa3xx_get_clk_frequency_khz(int); #define pxa3xx_get_clk_frequency_khz(x) (0) #endif -extern struct sysdev_class pxa_irq_sysclass; -extern struct sysdev_class pxa_gpio_sysclass; -extern struct sysdev_class pxa2xx_mfp_sysclass; -extern struct sysdev_class pxa3xx_mfp_sysclass; +extern struct syscore_ops pxa_irq_syscore_ops; +extern struct syscore_ops pxa_gpio_syscore_ops; +extern struct syscore_ops pxa2xx_mfp_syscore_ops; +extern struct syscore_ops pxa3xx_mfp_syscore_ops; void __init pxa_set_ffuart_info(void *info); void __init pxa_set_btuart_info(void *info); diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c index 6fd319ea5284..d65e4bde9b91 100644 --- a/arch/arm/mach-pxa/gumstix.c +++ b/arch/arm/mach-pxa/gumstix.c @@ -26,6 +26,7 @@ #include <linux/gpio.h> #include <linux/err.h> #include <linux/clk.h> +#include <linux/usb/gpio_vbus.h> #include <asm/setup.h> #include <asm/memory.h> @@ -106,14 +107,22 @@ static void __init gumstix_mmc_init(void) #endif #ifdef CONFIG_USB_GADGET_PXA25X -static struct pxa2xx_udc_mach_info gumstix_udc_info __initdata = { +static struct gpio_vbus_mach_info gumstix_udc_info = { .gpio_vbus = GPIO_GUMSTIX_USB_GPIOn, .gpio_pullup = GPIO_GUMSTIX_USB_GPIOx, }; +static struct platform_device gumstix_gpio_vbus = { + .name = "gpio-vbus", + .id = -1, + .dev = { + .platform_data = &gumstix_udc_info, + }, +}; + static void __init gumstix_udc_init(void) { - pxa_set_udc_info(&gumstix_udc_info); + platform_device_register(&gumstix_gpio_vbus); } #else static void gumstix_udc_init(void) diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index a908e0a5f396..9cdcca597924 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -35,6 +35,7 @@ #include <linux/spi/spi.h> #include <linux/spi/pxa2xx_spi.h> #include <linux/usb/gpio_vbus.h> +#include <linux/i2c/pxa-i2c.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -42,7 +43,6 @@ #include <mach/pxa27x.h> #include <mach/hx4700.h> -#include <plat/i2c.h> #include <mach/irda.h> #include <video/platform_lcd.h> @@ -711,7 +711,7 @@ static struct regulator_consumer_supply bq24022_consumers[] = { static struct regulator_init_data bq24022_init_data = { .constraints = { .max_uA = 500000, - .valid_ops_mask = REGULATOR_CHANGE_CURRENT, + .valid_ops_mask = REGULATOR_CHANGE_CURRENT|REGULATOR_CHANGE_STATUS, }, .num_consumer_supplies = ARRAY_SIZE(bq24022_consumers), .consumer_supplies = bq24022_consumers, diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c index dd40e4a9291c..f7fb64f11a7d 100644 --- a/arch/arm/mach-pxa/idp.c +++ b/arch/arm/mach-pxa/idp.c @@ -167,7 +167,7 @@ static void __init idp_init(void) platform_device_register(&smc91x_device); //platform_device_register(&mst_audio_device); - set_pxa_fb_info(&sharp_lm8v31); + pxa_set_fb_info(NULL, &sharp_lm8v31); pxa_set_mci_info(&idp_mci_platform_data); } diff --git a/arch/arm/mach-pxa/include/mach/gpio.h b/arch/arm/mach-pxa/include/mach/gpio.h index b024a8b37439..c4639502efca 100644 --- a/arch/arm/mach-pxa/include/mach/gpio.h +++ b/arch/arm/mach-pxa/include/mach/gpio.h @@ -99,11 +99,24 @@ #define GAFR(x) GPIO_REG(0x54 + (((x) & 0x70) >> 2)) -#define NR_BUILTIN_GPIO 128 +#define NR_BUILTIN_GPIO PXA_GPIO_IRQ_NUM #define gpio_to_bank(gpio) ((gpio) >> 5) #define gpio_to_irq(gpio) IRQ_GPIO(gpio) -#define irq_to_gpio(irq) IRQ_TO_GPIO(irq) + +static inline int irq_to_gpio(unsigned int irq) +{ + int gpio; + + if (irq == IRQ_GPIO0 || irq == IRQ_GPIO1) + return irq - IRQ_GPIO0; + + gpio = irq - PXA_GPIO_IRQ_BASE; + if (gpio >= 2 && gpio < NR_BUILTIN_GPIO) + return gpio; + + return -1; +} #ifdef CONFIG_CPU_PXA26x /* GPIO86/87/88/89 on PXA26x have their direction bits in GPDR2 inverted, diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h index a4285fc00878..038402404e39 100644 --- a/arch/arm/mach-pxa/include/mach/irqs.h +++ b/arch/arm/mach-pxa/include/mach/irqs.h @@ -93,9 +93,6 @@ #define GPIO_2_x_TO_IRQ(x) (PXA_GPIO_IRQ_BASE + (x)) #define IRQ_GPIO(x) (((x) < 2) ? (IRQ_GPIO0 + (x)) : GPIO_2_x_TO_IRQ(x)) -#define IRQ_TO_GPIO_2_x(i) ((i) - PXA_GPIO_IRQ_BASE) -#define IRQ_TO_GPIO(i) (((i) < IRQ_GPIO(2)) ? ((i) - IRQ_GPIO0) : IRQ_TO_GPIO_2_x(i)) - /* * The following interrupts are for board specific purposes. Since * the kernel can only run on one machine at a time, we can re-use diff --git a/arch/arm/mach-pxa/include/mach/memory.h b/arch/arm/mach-pxa/include/mach/memory.h index 92361a66b223..7f68724dcc27 100644 --- a/arch/arm/mach-pxa/include/mach/memory.h +++ b/arch/arm/mach-pxa/include/mach/memory.h @@ -15,7 +15,7 @@ /* * Physical DRAM offset. */ -#define PHYS_OFFSET UL(0xa0000000) +#define PLAT_PHYS_OFFSET UL(0xa0000000) #if !defined(__ASSEMBLY__) && defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI) void cmx2xx_pci_adjust_zones(unsigned long *size, unsigned long *holes); diff --git a/arch/arm/mach-pxa/include/mach/palmz72.h b/arch/arm/mach-pxa/include/mach/palmz72.h index 2bbcf70dd935..0d4700a79612 100644 --- a/arch/arm/mach-pxa/include/mach/palmz72.h +++ b/arch/arm/mach-pxa/include/mach/palmz72.h @@ -44,6 +44,11 @@ #define GPIO_NR_PALMZ72_BT_POWER 17 #define GPIO_NR_PALMZ72_BT_RESET 83 +/* Camera */ +#define GPIO_NR_PALMZ72_CAM_PWDN 56 +#define GPIO_NR_PALMZ72_CAM_RESET 57 +#define GPIO_NR_PALMZ72_CAM_POWER 91 + /** Initial values **/ /* Battery */ diff --git a/arch/arm/mach-pxa/include/mach/pm.h b/arch/arm/mach-pxa/include/mach/pm.h index fd8360c6839d..f15afe012995 100644 --- a/arch/arm/mach-pxa/include/mach/pm.h +++ b/arch/arm/mach-pxa/include/mach/pm.h @@ -22,9 +22,8 @@ struct pxa_cpu_pm_fns { extern struct pxa_cpu_pm_fns *pxa_cpu_pm_fns; /* sleep.S */ -extern void pxa25x_cpu_suspend(unsigned int); -extern void pxa27x_cpu_suspend(unsigned int); -extern void pxa_cpu_resume(void); +extern void pxa25x_cpu_suspend(unsigned int, long); +extern void pxa27x_cpu_suspend(unsigned int, long); extern int pxa_pm_enter(suspend_state_t state); extern int pxa_pm_prepare(void); diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h index e4fb4668c26e..207ecb49a61b 100644 --- a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h +++ b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h @@ -38,7 +38,7 @@ #define PCMD(x) __REG(0x40F50110 + ((x) << 2)) /* - * Slave Power Managment Unit + * Slave Power Management Unit */ #define ASCR __REG(0x40f40000) /* Application Subsystem Power Status/Configuration */ #define ARSR __REG(0x40f40004) /* Application Subsystem Reset Status */ diff --git a/arch/arm/mach-pxa/include/mach/pxafb.h b/arch/arm/mach-pxa/include/mach/pxafb.h index 160ec83f51a6..01a45ac48114 100644 --- a/arch/arm/mach-pxa/include/mach/pxafb.h +++ b/arch/arm/mach-pxa/include/mach/pxafb.h @@ -154,8 +154,8 @@ struct pxafb_mach_info { void (*pxafb_lcd_power)(int, struct fb_var_screeninfo *); void (*smart_update)(struct fb_info *); }; -void set_pxa_fb_info(struct pxafb_mach_info *hard_pxa_fb_info); -void set_pxa_fb_parent(struct device *parent_dev); + +void pxa_set_fb_info(struct device *, struct pxafb_mach_info *); unsigned long pxafb_get_hsync_time(struct device *dev); extern int pxafb_smart_queue(struct fb_info *info, uint16_t *cmds, int); diff --git a/arch/arm/mach-pxa/include/mach/z2.h b/arch/arm/mach-pxa/include/mach/z2.h index 8835c16bc82f..7b0f71ef3167 100644 --- a/arch/arm/mach-pxa/include/mach/z2.h +++ b/arch/arm/mach-pxa/include/mach/z2.h @@ -25,8 +25,7 @@ #define GPIO98_ZIPITZ2_LID_BUTTON 98 /* Libertas GSPI8686 WiFi */ -#define GPIO14_ZIPITZ2_WIFI_RESET 14 -#define GPIO15_ZIPITZ2_WIFI_POWER 15 +#define GPIO14_ZIPITZ2_WIFI_POWER 14 #define GPIO24_ZIPITZ2_WIFI_CS 24 #define GPIO36_ZIPITZ2_WIFI_IRQ 36 diff --git a/arch/arm/mach-pxa/include/mach/zeus.h b/arch/arm/mach-pxa/include/mach/zeus.h index faa408ab7ad7..0641f31a56b7 100644 --- a/arch/arm/mach-pxa/include/mach/zeus.h +++ b/arch/arm/mach-pxa/include/mach/zeus.h @@ -64,7 +64,7 @@ /* * CPLD registers: - * Only 4 registers, but spreaded over a 32MB address space. + * Only 4 registers, but spread over a 32MB address space. * Be gentle, and remap that over 32kB... */ diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c index 2693e3c3776f..32ed551bf9c5 100644 --- a/arch/arm/mach-pxa/irq.c +++ b/arch/arm/mach-pxa/irq.c @@ -15,7 +15,7 @@ #include <linux/init.h> #include <linux/module.h> #include <linux/interrupt.h> -#include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <linux/io.h> #include <linux/irq.h> @@ -137,9 +137,9 @@ static void __init pxa_init_low_gpio_irq(set_wake_t fn) GEDR0 = 0x3; for (irq = IRQ_GPIO0; irq <= IRQ_GPIO1; irq++) { - set_irq_chip(irq, &pxa_low_gpio_chip); - set_irq_chip_data(irq, irq_base(0)); - set_irq_handler(irq, handle_edge_irq); + irq_set_chip_and_handler(irq, &pxa_low_gpio_chip, + handle_edge_irq); + irq_set_chip_data(irq, irq_base(0)); set_irq_flags(irq, IRQF_VALID); } @@ -165,9 +165,9 @@ void __init pxa_init_irq(int irq_nr, set_wake_t fn) __raw_writel(i | IPR_VALID, IRQ_BASE + IPR(i)); irq = PXA_IRQ(i); - set_irq_chip(irq, &pxa_internal_irq_chip); - set_irq_chip_data(irq, base); - set_irq_handler(irq, handle_level_irq); + irq_set_chip_and_handler(irq, &pxa_internal_irq_chip, + handle_level_irq); + irq_set_chip_data(irq, base); set_irq_flags(irq, IRQF_VALID); } } @@ -183,7 +183,7 @@ void __init pxa_init_irq(int irq_nr, set_wake_t fn) static unsigned long saved_icmr[MAX_INTERNAL_IRQS/32]; static unsigned long saved_ipr[MAX_INTERNAL_IRQS]; -static int pxa_irq_suspend(struct sys_device *dev, pm_message_t state) +static int pxa_irq_suspend(void) { int i; @@ -202,7 +202,7 @@ static int pxa_irq_suspend(struct sys_device *dev, pm_message_t state) return 0; } -static int pxa_irq_resume(struct sys_device *dev) +static void pxa_irq_resume(void) { int i; @@ -218,22 +218,13 @@ static int pxa_irq_resume(struct sys_device *dev) __raw_writel(saved_ipr[i], IRQ_BASE + IPR(i)); __raw_writel(1, IRQ_BASE + ICCR); - return 0; } #else #define pxa_irq_suspend NULL #define pxa_irq_resume NULL #endif -struct sysdev_class pxa_irq_sysclass = { - .name = "irq", +struct syscore_ops pxa_irq_syscore_ops = { .suspend = pxa_irq_suspend, .resume = pxa_irq_resume, }; - -static int __init pxa_irq_init(void) -{ - return sysdev_class_register(&pxa_irq_sysclass); -} - -core_initcall(pxa_irq_init); diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c index ccb7bfad17ca..e5e326d2cdc9 100644 --- a/arch/arm/mach-pxa/littleton.c +++ b/arch/arm/mach-pxa/littleton.c @@ -28,6 +28,7 @@ #include <linux/leds.h> #include <linux/mfd/da903x.h> #include <linux/i2c/max732x.h> +#include <linux/i2c/pxa-i2c.h> #include <asm/types.h> #include <asm/setup.h> @@ -45,7 +46,6 @@ #include <mach/mmc.h> #include <plat/pxa27x_keypad.h> #include <mach/littleton.h> -#include <plat/i2c.h> #include <plat/pxa3xx_nand.h> #include "generic.h" @@ -185,7 +185,7 @@ static struct pxafb_mach_info littleton_lcd_info = { static void littleton_init_lcd(void) { - set_pxa_fb_info(&littleton_lcd_info); + pxa_set_fb_info(NULL, &littleton_lcd_info); } #else static inline void littleton_init_lcd(void) {}; diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c index c9a3e775c2de..6cf8180bf5bd 100644 --- a/arch/arm/mach-pxa/lpd270.c +++ b/arch/arm/mach-pxa/lpd270.c @@ -15,7 +15,7 @@ #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <linux/interrupt.h> #include <linux/sched.h> #include <linux/bitops.h> @@ -149,40 +149,32 @@ static void __init lpd270_init_irq(void) /* setup extra LogicPD PXA270 irqs */ for (irq = LPD270_IRQ(2); irq <= LPD270_IRQ(4); irq++) { - set_irq_chip(irq, &lpd270_irq_chip); - set_irq_handler(irq, handle_level_irq); + irq_set_chip_and_handler(irq, &lpd270_irq_chip, + handle_level_irq); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } - set_irq_chained_handler(IRQ_GPIO(0), lpd270_irq_handler); - set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING); + irq_set_chained_handler(IRQ_GPIO(0), lpd270_irq_handler); + irq_set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING); } #ifdef CONFIG_PM -static int lpd270_irq_resume(struct sys_device *dev) +static void lpd270_irq_resume(void) { __raw_writew(lpd270_irq_enabled, LPD270_INT_MASK); - return 0; } -static struct sysdev_class lpd270_irq_sysclass = { - .name = "cpld_irq", +static struct syscore_ops lpd270_irq_syscore_ops = { .resume = lpd270_irq_resume, }; -static struct sys_device lpd270_irq_device = { - .cls = &lpd270_irq_sysclass, -}; - static int __init lpd270_irq_device_init(void) { - int ret = -ENODEV; if (machine_is_logicpd_pxa270()) { - ret = sysdev_class_register(&lpd270_irq_sysclass); - if (ret == 0) - ret = sysdev_register(&lpd270_irq_device); + register_syscore_ops(&lpd270_irq_syscore_ops); + return 0; } - return ret; + return -ENODEV; } device_initcall(lpd270_irq_device_init); @@ -480,7 +472,7 @@ static void __init lpd270_init(void) pxa_set_ac97_info(NULL); if (lpd270_lcd_to_use != NULL) - set_pxa_fb_info(lpd270_lcd_to_use); + pxa_set_fb_info(NULL, lpd270_lcd_to_use); pxa_set_ohci_info(&lpd270_ohci_platform_data); } diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index dca20de306bb..e10ddb827147 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -15,7 +15,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <linux/major.h> #include <linux/fb.h> #include <linux/interrupt.h> @@ -165,42 +165,33 @@ static void __init lubbock_init_irq(void) /* setup extra lubbock irqs */ for (irq = LUBBOCK_IRQ(0); irq <= LUBBOCK_LAST_IRQ; irq++) { - set_irq_chip(irq, &lubbock_irq_chip); - set_irq_handler(irq, handle_level_irq); + irq_set_chip_and_handler(irq, &lubbock_irq_chip, + handle_level_irq); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } - set_irq_chained_handler(IRQ_GPIO(0), lubbock_irq_handler); - set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING); + irq_set_chained_handler(IRQ_GPIO(0), lubbock_irq_handler); + irq_set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING); } #ifdef CONFIG_PM -static int lubbock_irq_resume(struct sys_device *dev) +static void lubbock_irq_resume(void) { LUB_IRQ_MASK_EN = lubbock_irq_enabled; - return 0; } -static struct sysdev_class lubbock_irq_sysclass = { - .name = "cpld_irq", +static struct syscore_ops lubbock_irq_syscore_ops = { .resume = lubbock_irq_resume, }; -static struct sys_device lubbock_irq_device = { - .cls = &lubbock_irq_sysclass, -}; - static int __init lubbock_irq_device_init(void) { - int ret = -ENODEV; - if (machine_is_lubbock()) { - ret = sysdev_class_register(&lubbock_irq_sysclass); - if (ret == 0) - ret = sysdev_register(&lubbock_irq_device); + register_syscore_ops(&lubbock_irq_syscore_ops); + return 0; } - return ret; + return -ENODEV; } device_initcall(lubbock_irq_device_init); @@ -521,7 +512,7 @@ static void __init lubbock_init(void) clk_add_alias("SA1111_CLK", NULL, "GPIO11_CLK", NULL); pxa_set_udc_info(&udc_info); - set_pxa_fb_info(&sharp_lm8v31); + pxa_set_fb_info(NULL, &sharp_lm8v31); pxa_set_mci_info(&lubbock_mci_platform_data); pxa_set_ficp_info(&lubbock_ficp_platform_data); pxa_set_ac97_info(NULL); diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index 41198f0dc3ac..9984ef70bd79 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -28,6 +28,7 @@ #include <linux/regulator/bq24022.h> #include <linux/regulator/machine.h> #include <linux/usb/gpio_vbus.h> +#include <linux/i2c/pxa-i2c.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -36,7 +37,6 @@ #include <mach/pxa27x.h> #include <mach/magician.h> #include <mach/pxafb.h> -#include <plat/i2c.h> #include <mach/mmc.h> #include <mach/irda.h> #include <mach/ohci.h> @@ -599,7 +599,7 @@ static struct regulator_consumer_supply bq24022_consumers[] = { static struct regulator_init_data bq24022_init_data = { .constraints = { .max_uA = 500000, - .valid_ops_mask = REGULATOR_CHANGE_CURRENT, + .valid_ops_mask = REGULATOR_CHANGE_CURRENT | REGULATOR_CHANGE_STATUS, }, .num_consumer_supplies = ARRAY_SIZE(bq24022_consumers), .consumer_supplies = bq24022_consumers, @@ -757,7 +757,7 @@ static void __init magician_init(void) gpio_direction_output(GPIO104_MAGICIAN_LCD_POWER_1, 0); gpio_direction_output(GPIO105_MAGICIAN_LCD_POWER_2, 0); gpio_direction_output(GPIO106_MAGICIAN_LCD_POWER_3, 0); - set_pxa_fb_info(lcd_select ? &samsung_info : &toppoly_info); + pxa_set_fb_info(NULL, lcd_select ? &samsung_info : &toppoly_info); } else pr_err("LCD detection: CPLD mapping failed\n"); } diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index d4b6f2375f2c..3479e2b3b511 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -15,7 +15,7 @@ #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <linux/interrupt.h> #include <linux/sched.h> #include <linux/bitops.h> @@ -27,6 +27,7 @@ #include <linux/gpio_keys.h> #include <linux/pwm_backlight.h> #include <linux/smc91x.h> +#include <linux/i2c/pxa-i2c.h> #include <asm/types.h> #include <asm/setup.h> @@ -46,7 +47,6 @@ #include <mach/mainstone.h> #include <mach/audio.h> #include <mach/pxafb.h> -#include <plat/i2c.h> #include <mach/mmc.h> #include <mach/irda.h> #include <mach/ohci.h> @@ -166,8 +166,8 @@ static void __init mainstone_init_irq(void) /* setup extra Mainstone irqs */ for(irq = MAINSTONE_IRQ(0); irq <= MAINSTONE_IRQ(15); irq++) { - set_irq_chip(irq, &mainstone_irq_chip); - set_irq_handler(irq, handle_level_irq); + irq_set_chip_and_handler(irq, &mainstone_irq_chip, + handle_level_irq); if (irq == MAINSTONE_IRQ(10) || irq == MAINSTONE_IRQ(14)) set_irq_flags(irq, IRQF_VALID | IRQF_PROBE | IRQF_NOAUTOEN); else @@ -179,37 +179,27 @@ static void __init mainstone_init_irq(void) MST_INTMSKENA = 0; MST_INTSETCLR = 0; - set_irq_chained_handler(IRQ_GPIO(0), mainstone_irq_handler); - set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING); + irq_set_chained_handler(IRQ_GPIO(0), mainstone_irq_handler); + irq_set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING); } #ifdef CONFIG_PM -static int mainstone_irq_resume(struct sys_device *dev) +static void mainstone_irq_resume(void) { MST_INTMSKENA = mainstone_irq_enabled; - return 0; } -static struct sysdev_class mainstone_irq_sysclass = { - .name = "cpld_irq", +static struct syscore_ops mainstone_irq_syscore_ops = { .resume = mainstone_irq_resume, }; -static struct sys_device mainstone_irq_device = { - .cls = &mainstone_irq_sysclass, -}; - static int __init mainstone_irq_device_init(void) { - int ret = -ENODEV; + if (machine_is_mainstone()) + register_syscore_ops(&mainstone_irq_syscore_ops); - if (machine_is_mainstone()) { - ret = sysdev_class_register(&mainstone_irq_sysclass); - if (ret == 0) - ret = sysdev_register(&mainstone_irq_device); - } - return ret; + return 0; } device_initcall(mainstone_irq_device_init); @@ -592,7 +582,7 @@ static void __init mainstone_init(void) else mainstone_pxafb_info.modes = &toshiba_ltm035a776c_mode; - set_pxa_fb_info(&mainstone_pxafb_info); + pxa_set_fb_info(NULL, &mainstone_pxafb_info); mainstone_backlight_register(); pxa_set_mci_info(&mainstone_mci_platform_data); diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c index 1d1419b73457..87ae3129f4f7 100644 --- a/arch/arm/mach-pxa/mfp-pxa2xx.c +++ b/arch/arm/mach-pxa/mfp-pxa2xx.c @@ -16,7 +16,7 @@ #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> -#include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <mach/gpio.h> #include <mach/pxa2xx-regs.h> @@ -338,7 +338,7 @@ static unsigned long saved_gafr[2][4]; static unsigned long saved_gpdr[4]; static unsigned long saved_pgsr[4]; -static int pxa2xx_mfp_suspend(struct sys_device *d, pm_message_t state) +static int pxa2xx_mfp_suspend(void) { int i; @@ -365,7 +365,7 @@ static int pxa2xx_mfp_suspend(struct sys_device *d, pm_message_t state) return 0; } -static int pxa2xx_mfp_resume(struct sys_device *d) +static void pxa2xx_mfp_resume(void) { int i; @@ -376,15 +376,13 @@ static int pxa2xx_mfp_resume(struct sys_device *d) PGSR(i) = saved_pgsr[i]; } PSSR = PSSR_RDH | PSSR_PH; - return 0; } #else #define pxa2xx_mfp_suspend NULL #define pxa2xx_mfp_resume NULL #endif -struct sysdev_class pxa2xx_mfp_sysclass = { - .name = "mfp", +struct syscore_ops pxa2xx_mfp_syscore_ops = { .suspend = pxa2xx_mfp_suspend, .resume = pxa2xx_mfp_resume, }; @@ -409,6 +407,6 @@ static int __init pxa2xx_mfp_init(void) for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++) gpdr_lpm[i] = GPDR(i * 32); - return sysdev_class_register(&pxa2xx_mfp_sysclass); + return 0; } postcore_initcall(pxa2xx_mfp_init); diff --git a/arch/arm/mach-pxa/mfp-pxa3xx.c b/arch/arm/mach-pxa/mfp-pxa3xx.c index 7a270eecd480..89863a01ecd7 100644 --- a/arch/arm/mach-pxa/mfp-pxa3xx.c +++ b/arch/arm/mach-pxa/mfp-pxa3xx.c @@ -17,7 +17,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/io.h> -#include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <mach/hardware.h> #include <mach/mfp-pxa3xx.h> @@ -31,13 +31,13 @@ * a pull-down mode if they're an active low chip select, and we're * just entering standby. */ -static int pxa3xx_mfp_suspend(struct sys_device *d, pm_message_t state) +static int pxa3xx_mfp_suspend(void) { mfp_config_lpm(); return 0; } -static int pxa3xx_mfp_resume(struct sys_device *d) +static void pxa3xx_mfp_resume(void) { mfp_config_run(); @@ -47,24 +47,13 @@ static int pxa3xx_mfp_resume(struct sys_device *d) * preserve them here in case they will be referenced later */ ASCR &= ~(ASCR_RDH | ASCR_D1S | ASCR_D2S | ASCR_D3S); - return 0; } #else #define pxa3xx_mfp_suspend NULL #define pxa3xx_mfp_resume NULL #endif -struct sysdev_class pxa3xx_mfp_sysclass = { - .name = "mfp", +struct syscore_ops pxa3xx_mfp_syscore_ops = { .suspend = pxa3xx_mfp_suspend, - .resume = pxa3xx_mfp_resume, + .resume = pxa3xx_mfp_resume, }; - -static int __init mfp_init_devicefs(void) -{ - if (cpu_is_pxa3xx()) - return sysdev_class_register(&pxa3xx_mfp_sysclass); - - return 0; -} -postcore_initcall(mfp_init_devicefs); diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index faafea3542fb..e3470137c934 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -22,7 +22,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <linux/input.h> #include <linux/delay.h> #include <linux/gpio_keys.h> @@ -39,6 +39,7 @@ #include <linux/usb/gpio_vbus.h> #include <linux/regulator/max1586.h> #include <linux/slab.h> +#include <linux/i2c/pxa-i2c.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -50,7 +51,6 @@ #include <mach/mmc.h> #include <mach/udc.h> #include <mach/pxa27x-udc.h> -#include <plat/i2c.h> #include <mach/camera.h> #include <mach/audio.h> #include <media/soc_camera.h> @@ -458,7 +458,7 @@ static struct platform_device strataflash = { /* * Suspend/Resume bootstrap management * - * MIO A701 reboot sequence is highly ROM dependant. From the one dissassembled, + * MIO A701 reboot sequence is highly ROM dependent. From the one dissassembled, * this sequence is as follows : * - disables interrupts * - initialize SDRAM (self refresh RAM into active RAM) @@ -488,7 +488,7 @@ static void install_bootstrap(void) } -static int mioa701_sys_suspend(struct sys_device *sysdev, pm_message_t state) +static int mioa701_sys_suspend(void) { int i = 0, is_bt_on; u32 *mem_resume_vector = phys_to_virt(RESUME_VECTOR_ADDR); @@ -514,7 +514,7 @@ static int mioa701_sys_suspend(struct sys_device *sysdev, pm_message_t state) return 0; } -static int mioa701_sys_resume(struct sys_device *sysdev) +static void mioa701_sys_resume(void) { int i = 0; u32 *mem_resume_vector = phys_to_virt(RESUME_VECTOR_ADDR); @@ -527,43 +527,18 @@ static int mioa701_sys_resume(struct sys_device *sysdev) *mem_resume_enabler = save_buffer[i++]; *mem_resume_bt = save_buffer[i++]; *mem_resume_unknown = save_buffer[i++]; - - return 0; } -static struct sysdev_class mioa701_sysclass = { - .name = "mioa701", -}; - -static struct sys_device sysdev_bootstrap = { - .cls = &mioa701_sysclass, -}; - -static struct sysdev_driver driver_bootstrap = { - .suspend = &mioa701_sys_suspend, - .resume = &mioa701_sys_resume, +static struct syscore_ops mioa701_syscore_ops = { + .suspend = mioa701_sys_suspend, + .resume = mioa701_sys_resume, }; static int __init bootstrap_init(void) { - int rc; int save_size = mioa701_bootstrap_lg + (sizeof(u32) * 3); - rc = sysdev_class_register(&mioa701_sysclass); - if (rc) { - printk(KERN_ERR "Failed registering mioa701 sys class\n"); - return -ENODEV; - } - rc = sysdev_register(&sysdev_bootstrap); - if (rc) { - printk(KERN_ERR "Failed registering mioa701 sys device\n"); - return -ENODEV; - } - rc = sysdev_driver_register(&mioa701_sysclass, &driver_bootstrap); - if (rc) { - printk(KERN_ERR "Failed registering PMU sys driver\n"); - return -ENODEV; - } + register_syscore_ops(&mioa701_syscore_ops); save_buffer = kmalloc(save_size, GFP_KERNEL); if (!save_buffer) @@ -576,9 +551,7 @@ static int __init bootstrap_init(void) static void bootstrap_exit(void) { kfree(save_buffer); - sysdev_driver_unregister(&mioa701_sysclass, &driver_bootstrap); - sysdev_unregister(&sysdev_bootstrap); - sysdev_class_unregister(&mioa701_sysclass); + unregister_syscore_ops(&mioa701_syscore_ops); printk(KERN_CRIT "Unregistering mioa701 suspend will hang next" "resume !!!\n"); @@ -795,7 +768,7 @@ static void __init mioa701_machine_init(void) pxa_set_stuart_info(NULL); mio_gpio_request(ARRAY_AND_SIZE(global_gpios)); bootstrap_init(); - set_pxa_fb_info(&mioa701_pxafb_info); + pxa_set_fb_info(NULL, &mioa701_pxafb_info); pxa_set_mci_info(&mioa701_mci_info); pxa_set_keypad_info(&mioa701_keypad_info); pxa_set_udc_info(&mioa701_udc_info); diff --git a/arch/arm/mach-pxa/mxm8x10.c b/arch/arm/mach-pxa/mxm8x10.c index cdf7f41e2bb3..b5a8fd3fce04 100644 --- a/arch/arm/mach-pxa/mxm8x10.c +++ b/arch/arm/mach-pxa/mxm8x10.c @@ -22,8 +22,8 @@ #include <linux/serial_8250.h> #include <linux/dm9000.h> #include <linux/gpio.h> +#include <linux/i2c/pxa-i2c.h> -#include <plat/i2c.h> #include <plat/pxa3xx_nand.h> #include <mach/pxafb.h> diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c index 35572c427fa8..325c245c0a0d 100644 --- a/arch/arm/mach-pxa/palm27x.c +++ b/arch/arm/mach-pxa/palm27x.c @@ -1,8 +1,7 @@ /* * Common code for Palm LD, T5, TX, Z72 * - * Copyright (C) 2010 - * Marek Vasut <marek.vasut@gmail.com> + * Copyright (C) 2010-2011 Marek Vasut <marek.vasut@gmail.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -22,6 +21,7 @@ #include <linux/power_supply.h> #include <linux/usb/gpio_vbus.h> #include <linux/regulator/max1586.h> +#include <linux/i2c/pxa-i2c.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -36,8 +36,6 @@ #include <mach/palmasoc.h> #include <mach/palm27x.h> -#include <plat/i2c.h> - #include "generic.h" #include "devices.h" @@ -159,7 +157,7 @@ void __init palm27x_lcd_init(int power, struct pxafb_mode_info *mode) palm27x_lcd_screen.pxafb_lcd_power = palm27x_lcd_ctl; } - set_pxa_fb_info(&palm27x_lcd_screen); + pxa_set_fb_info(NULL, &palm27x_lcd_screen); } #endif diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c index a6f898cbfac9..4061ecddee70 100644 --- a/arch/arm/mach-pxa/palmld.c +++ b/arch/arm/mach-pxa/palmld.c @@ -24,7 +24,6 @@ #include <linux/gpio.h> #include <linux/wm97xx.h> #include <linux/power_supply.h> -#include <linux/sysdev.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c index a09a2374697b..fb06bd047272 100644 --- a/arch/arm/mach-pxa/palmtc.c +++ b/arch/arm/mach-pxa/palmtc.c @@ -507,7 +507,7 @@ static struct pxafb_mach_info palmtc_lcd_screen = { static void __init palmtc_lcd_init(void) { - set_pxa_fb_info(&palmtc_lcd_screen); + pxa_set_fb_info(NULL, &palmtc_lcd_screen); } #else static inline void palmtc_lcd_init(void) {} diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c index 3f25014a136c..726f5b98dcd3 100644 --- a/arch/arm/mach-pxa/palmte2.c +++ b/arch/arm/mach-pxa/palmte2.c @@ -136,30 +136,14 @@ static struct platform_device palmte2_pxa_keys = { /****************************************************************************** * Backlight ******************************************************************************/ +static struct gpio palmte_bl_gpios[] = { + { GPIO_NR_PALMTE2_BL_POWER, GPIOF_INIT_LOW, "Backlight power" }, + { GPIO_NR_PALMTE2_LCD_POWER, GPIOF_INIT_LOW, "LCD power" }, +}; + static int palmte2_backlight_init(struct device *dev) { - int ret; - - ret = gpio_request(GPIO_NR_PALMTE2_BL_POWER, "BL POWER"); - if (ret) - goto err; - ret = gpio_direction_output(GPIO_NR_PALMTE2_BL_POWER, 0); - if (ret) - goto err2; - ret = gpio_request(GPIO_NR_PALMTE2_LCD_POWER, "LCD POWER"); - if (ret) - goto err2; - ret = gpio_direction_output(GPIO_NR_PALMTE2_LCD_POWER, 0); - if (ret) - goto err3; - - return 0; -err3: - gpio_free(GPIO_NR_PALMTE2_LCD_POWER); -err2: - gpio_free(GPIO_NR_PALMTE2_BL_POWER); -err: - return ret; + return gpio_request_array(ARRAY_AND_SIZE(palmte_bl_gpios)); } static int palmte2_backlight_notify(struct device *dev, int brightness) @@ -171,8 +155,7 @@ static int palmte2_backlight_notify(struct device *dev, int brightness) static void palmte2_backlight_exit(struct device *dev) { - gpio_free(GPIO_NR_PALMTE2_BL_POWER); - gpio_free(GPIO_NR_PALMTE2_LCD_POWER); + gpio_free_array(ARRAY_AND_SIZE(palmte_bl_gpios)); } static struct platform_pwm_backlight_data palmte2_backlight_data = { @@ -363,7 +346,7 @@ static void __init palmte2_init(void) pxa_set_btuart_info(NULL); pxa_set_stuart_info(NULL); - set_pxa_fb_info(&palmte2_lcd_screen); + pxa_set_fb_info(NULL, &palmte2_lcd_screen); pxa_set_mci_info(&palmte2_mci_platform_data); palmte2_udc_init(); pxa_set_ac97_info(&palmte2_ac97_pdata); diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c index 8aadad55fbe4..20d1b18b1733 100644 --- a/arch/arm/mach-pxa/palmtreo.c +++ b/arch/arm/mach-pxa/palmtreo.c @@ -25,7 +25,6 @@ #include <linux/pwm_backlight.h> #include <linux/gpio.h> #include <linux/power_supply.h> -#include <linux/sysdev.h> #include <linux/w1-gpio.h> #include <asm/mach-types.h> diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c index 7bf4017326e3..65f24f0b77e8 100644 --- a/arch/arm/mach-pxa/palmz72.c +++ b/arch/arm/mach-pxa/palmz72.c @@ -19,7 +19,7 @@ */ #include <linux/platform_device.h> -#include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <linux/delay.h> #include <linux/irq.h> #include <linux/gpio_keys.h> @@ -30,6 +30,7 @@ #include <linux/wm97xx.h> #include <linux/power_supply.h> #include <linux/usb/gpio_vbus.h> +#include <linux/i2c-gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -47,6 +48,9 @@ #include <mach/palm27x.h> #include <mach/pm.h> +#include <mach/camera.h> + +#include <media/soc_camera.h> #include "generic.h" #include "devices.h" @@ -103,6 +107,28 @@ static unsigned long palmz72_pin_config[] __initdata = { GPIO22_GPIO, /* LCD border color */ GPIO96_GPIO, /* lcd power */ + /* PXA Camera */ + GPIO81_CIF_DD_0, + GPIO48_CIF_DD_5, + GPIO50_CIF_DD_3, + GPIO51_CIF_DD_2, + GPIO52_CIF_DD_4, + GPIO53_CIF_MCLK, + GPIO54_CIF_PCLK, + GPIO55_CIF_DD_1, + GPIO84_CIF_FV, + GPIO85_CIF_LV, + GPIO93_CIF_DD_6, + GPIO108_CIF_DD_7, + + GPIO56_GPIO, /* OV9640 Powerdown */ + GPIO57_GPIO, /* OV9640 Reset */ + GPIO91_GPIO, /* OV9640 Power */ + + /* I2C */ + GPIO117_GPIO, /* I2C_SCL */ + GPIO118_GPIO, /* I2C_SDA */ + /* Misc. */ GPIO0_GPIO | WAKEUP_ON_LEVEL_HIGH, /* power detect */ GPIO88_GPIO, /* green led */ @@ -207,12 +233,12 @@ static struct palmz72_resume_info palmz72_resume_info = { static unsigned long store_ptr; -/* sys_device for Palm Zire 72 PM */ +/* syscore_ops for Palm Zire 72 PM */ -static int palmz72_pm_suspend(struct sys_device *dev, pm_message_t msg) +static int palmz72_pm_suspend(void) { /* setup the resume_info struct for the original bootloader */ - palmz72_resume_info.resume_addr = (u32) pxa_cpu_resume; + palmz72_resume_info.resume_addr = (u32) cpu_resume; /* Storing memory touched by ROM */ store_ptr = *PALMZ72_SAVE_DWORD; @@ -223,37 +249,129 @@ static int palmz72_pm_suspend(struct sys_device *dev, pm_message_t msg) return 0; } -static int palmz72_pm_resume(struct sys_device *dev) +static void palmz72_pm_resume(void) { *PALMZ72_SAVE_DWORD = store_ptr; - return 0; } -static struct sysdev_class palmz72_pm_sysclass = { - .name = "palmz72_pm", +static struct syscore_ops palmz72_pm_syscore_ops = { .suspend = palmz72_pm_suspend, .resume = palmz72_pm_resume, }; -static struct sys_device palmz72_pm_device = { - .cls = &palmz72_pm_sysclass, -}; - static int __init palmz72_pm_init(void) { - int ret = -ENODEV; if (machine_is_palmz72()) { - ret = sysdev_class_register(&palmz72_pm_sysclass); - if (ret == 0) - ret = sysdev_register(&palmz72_pm_device); + register_syscore_ops(&palmz72_pm_syscore_ops); + return 0; } - return ret; + return -ENODEV; } device_initcall(palmz72_pm_init); #endif /****************************************************************************** + * SoC Camera + ******************************************************************************/ +#if defined(CONFIG_SOC_CAMERA_OV9640) || \ + defined(CONFIG_SOC_CAMERA_OV9640_MODULE) +static struct pxacamera_platform_data palmz72_pxacamera_platform_data = { + .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 | + PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN, + .mclk_10khz = 2600, +}; + +/* Board I2C devices. */ +static struct i2c_board_info palmz72_i2c_device[] = { + { + I2C_BOARD_INFO("ov9640", 0x30), + } +}; + +static int palmz72_camera_power(struct device *dev, int power) +{ + gpio_set_value(GPIO_NR_PALMZ72_CAM_PWDN, !power); + mdelay(50); + return 0; +} + +static int palmz72_camera_reset(struct device *dev) +{ + gpio_set_value(GPIO_NR_PALMZ72_CAM_RESET, 1); + mdelay(50); + gpio_set_value(GPIO_NR_PALMZ72_CAM_RESET, 0); + mdelay(50); + return 0; +} + +static struct soc_camera_link palmz72_iclink = { + .bus_id = 0, /* Match id in pxa27x_device_camera in device.c */ + .board_info = &palmz72_i2c_device[0], + .i2c_adapter_id = 0, + .module_name = "ov96xx", + .power = &palmz72_camera_power, + .reset = &palmz72_camera_reset, + .flags = SOCAM_DATAWIDTH_8, +}; + +static struct i2c_gpio_platform_data palmz72_i2c_bus_data = { + .sda_pin = 118, + .scl_pin = 117, + .udelay = 10, + .timeout = 100, +}; + +static struct platform_device palmz72_i2c_bus_device = { + .name = "i2c-gpio", + .id = 0, /* we use this as a replacement for i2c-pxa */ + .dev = { + .platform_data = &palmz72_i2c_bus_data, + } +}; + +static struct platform_device palmz72_camera = { + .name = "soc-camera-pdrv", + .id = -1, + .dev = { + .platform_data = &palmz72_iclink, + }, +}; + +/* Here we request the camera GPIOs and configure them. We power up the camera + * module, deassert the reset pin, but put it into powerdown (low to no power + * consumption) mode. This allows us to later bring the module up fast. */ +static struct gpio palmz72_camera_gpios[] = { + { GPIO_NR_PALMZ72_CAM_POWER, GPIOF_INIT_HIGH,"Camera DVDD" }, + { GPIO_NR_PALMZ72_CAM_RESET, GPIOF_INIT_LOW, "Camera RESET" }, + { GPIO_NR_PALMZ72_CAM_PWDN, GPIOF_INIT_LOW, "Camera PWDN" }, +}; + +static inline void __init palmz72_cam_gpio_init(void) +{ + int ret; + + ret = gpio_request_array(ARRAY_AND_SIZE(palmz72_camera_gpios)); + if (!ret) + gpio_free_array(ARRAY_AND_SIZE(palmz72_camera_gpios)); + else + printk(KERN_ERR "Camera GPIO init failed!\n"); + + return; +} + +static void __init palmz72_camera_init(void) +{ + palmz72_cam_gpio_init(); + pxa_set_camera_info(&palmz72_pxacamera_platform_data); + platform_device_register(&palmz72_i2c_bus_device); + platform_device_register(&palmz72_camera); +} +#else +static inline void palmz72_camera_init(void) {} +#endif + +/****************************************************************************** * Machine init ******************************************************************************/ static void __init palmz72_init(void) @@ -276,6 +394,7 @@ static void __init palmz72_init(void) palm27x_pmic_init(); palmz72_kpc_init(); palmz72_leds_init(); + palmz72_camera_init(); } MACHINE_START(PALMZ72, "Palm Zire72") diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c index 90820faa711a..6d5b7e062124 100644 --- a/arch/arm/mach-pxa/pcm990-baseboard.c +++ b/arch/arm/mach-pxa/pcm990-baseboard.c @@ -23,12 +23,12 @@ #include <linux/irq.h> #include <linux/platform_device.h> #include <linux/i2c.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/pwm_backlight.h> #include <media/soc_camera.h> #include <asm/gpio.h> -#include <plat/i2c.h> #include <mach/camera.h> #include <asm/mach/map.h> #include <mach/pxa27x.h> @@ -281,16 +281,16 @@ static void __init pcm990_init_irq(void) /* setup extra PCM990 irqs */ for (irq = PCM027_IRQ(0); irq <= PCM027_IRQ(3); irq++) { - set_irq_chip(irq, &pcm990_irq_chip); - set_irq_handler(irq, handle_level_irq); + irq_set_chip_and_handler(irq, &pcm990_irq_chip, + handle_level_irq); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } PCM990_INTMSKENA = 0x00; /* disable all Interrupts */ PCM990_INTSETCLR = 0xFF; - set_irq_chained_handler(PCM990_CTRL_INT_IRQ, pcm990_irq_handler); - set_irq_type(PCM990_CTRL_INT_IRQ, PCM990_CTRL_INT_IRQ_EDGE); + irq_set_chained_handler(PCM990_CTRL_INT_IRQ, pcm990_irq_handler); + irq_set_irq_type(PCM990_CTRL_INT_IRQ, PCM990_CTRL_INT_IRQ_EDGE); } static int pcm990_mci_init(struct device *dev, irq_handler_t mci_detect_int, @@ -515,7 +515,7 @@ void __init pcm990_baseboard_init(void) pcm990_init_irq(); #ifndef CONFIG_PCM990_DISPLAY_NONE - set_pxa_fb_info(&pcm990_fbinfo); + pxa_set_fb_info(NULL, &pcm990_fbinfo); #endif platform_device_register(&pcm990_backlight_device); diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c index 1807c9abdde0..51e1583265b2 100644 --- a/arch/arm/mach-pxa/pm.c +++ b/arch/arm/mach-pxa/pm.c @@ -67,11 +67,6 @@ int pxa_pm_enter(suspend_state_t state) EXPORT_SYMBOL_GPL(pxa_pm_enter); -unsigned long sleep_phys_sp(void *sp) -{ - return virt_to_phys(sp); -} - static int pxa_pm_valid(suspend_state_t state) { if (pxa_cpu_pm_fns) diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index 4f0ff1ab623d..16d14fd79b4b 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -23,6 +23,7 @@ #include <linux/mtd/physmap.h> #include <linux/gpio.h> #include <linux/i2c.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> #include <linux/spi/pxa2xx_spi.h> @@ -44,7 +45,6 @@ #include <mach/irda.h> #include <mach/poodle.h> #include <mach/pxafb.h> -#include <plat/i2c.h> #include <asm/hardware/scoop.h> #include <asm/hardware/locomo.h> @@ -445,8 +445,7 @@ static void __init poodle_init(void) if (ret) pr_warning("poodle: Unable to register LoCoMo device\n"); - set_pxa_fb_parent(&poodle_locomo_device.dev); - set_pxa_fb_info(&poodle_fb_info); + pxa_set_fb_info(&poodle_locomo_device.dev, &poodle_fb_info); pxa_set_udc_info(&udc_info); pxa_set_mci_info(&poodle_mci_platform_data); pxa_set_ficp_info(&poodle_ficp_platform_data); diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index fbc5b775f895..fed363cec9c6 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -21,7 +21,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/suspend.h> -#include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <linux/irq.h> #include <asm/mach/map.h> @@ -244,7 +244,7 @@ static void pxa25x_cpu_pm_enter(suspend_state_t state) switch (state) { case PM_SUSPEND_MEM: - pxa25x_cpu_suspend(PWRMODE_SLEEP); + pxa25x_cpu_suspend(PWRMODE_SLEEP, PLAT_PHYS_OFFSET - PAGE_OFFSET); break; } } @@ -252,7 +252,7 @@ static void pxa25x_cpu_pm_enter(suspend_state_t state) static int pxa25x_cpu_pm_prepare(void) { /* set resume return address */ - PSPR = virt_to_phys(pxa_cpu_resume); + PSPR = virt_to_phys(cpu_resume); return 0; } @@ -285,7 +285,7 @@ static inline void pxa25x_init_pm(void) {} static int pxa25x_set_wake(struct irq_data *d, unsigned int on) { - int gpio = IRQ_TO_GPIO(d->irq); + int gpio = irq_to_gpio(d->irq); uint32_t mask = 0; if (gpio >= 0 && gpio < 85) @@ -347,23 +347,12 @@ static struct platform_device *pxa25x_devices[] __initdata = { &pxa25x_device_assp, &pxa25x_device_pwm0, &pxa25x_device_pwm1, -}; - -static struct sys_device pxa25x_sysdev[] = { - { - .cls = &pxa_irq_sysclass, - }, { - .cls = &pxa2xx_mfp_sysclass, - }, { - .cls = &pxa_gpio_sysclass, - }, { - .cls = &pxa2xx_clock_sysclass, - } + &pxa_device_asoc_platform, }; static int __init pxa25x_init(void) { - int i, ret = 0; + int ret = 0; if (cpu_is_pxa25x()) { @@ -376,11 +365,10 @@ static int __init pxa25x_init(void) pxa25x_init_pm(); - for (i = 0; i < ARRAY_SIZE(pxa25x_sysdev); i++) { - ret = sysdev_register(&pxa25x_sysdev[i]); - if (ret) - pr_err("failed to register sysdev[%d]\n", i); - } + register_syscore_ops(&pxa_irq_syscore_ops); + register_syscore_ops(&pxa2xx_mfp_syscore_ops); + register_syscore_ops(&pxa_gpio_syscore_ops); + register_syscore_ops(&pxa2xx_clock_syscore_ops); ret = platform_add_devices(pxa25x_devices, ARRAY_SIZE(pxa25x_devices)); diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 987301ff4c33..2fecbec58d88 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -16,9 +16,10 @@ #include <linux/init.h> #include <linux/suspend.h> #include <linux/platform_device.h> -#include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <linux/io.h> #include <linux/irq.h> +#include <linux/i2c/pxa-i2c.h> #include <asm/mach/map.h> #include <mach/hardware.h> @@ -32,8 +33,6 @@ #include <mach/dma.h> #include <mach/smemc.h> -#include <plat/i2c.h> - #include "generic.h" #include "devices.h" #include "clock.h" @@ -300,7 +299,7 @@ void pxa27x_cpu_pm_enter(suspend_state_t state) pxa_cpu_standby(); break; case PM_SUSPEND_MEM: - pxa27x_cpu_suspend(pwrmode); + pxa27x_cpu_suspend(pwrmode, PLAT_PHYS_OFFSET - PAGE_OFFSET); break; } } @@ -313,7 +312,7 @@ static int pxa27x_cpu_pm_valid(suspend_state_t state) static int pxa27x_cpu_pm_prepare(void) { /* set resume return address */ - PSPR = virt_to_phys(pxa_cpu_resume); + PSPR = virt_to_phys(cpu_resume); return 0; } @@ -346,7 +345,7 @@ static inline void pxa27x_init_pm(void) {} */ static int pxa27x_set_wake(struct irq_data *d, unsigned int on) { - int gpio = IRQ_TO_GPIO(d->irq); + int gpio = irq_to_gpio(d->irq); uint32_t mask; if (gpio >= 0 && gpio < 128) @@ -429,21 +428,9 @@ static struct platform_device *devices[] __initdata = { &pxa27x_device_pwm1, }; -static struct sys_device pxa27x_sysdev[] = { - { - .cls = &pxa_irq_sysclass, - }, { - .cls = &pxa2xx_mfp_sysclass, - }, { - .cls = &pxa_gpio_sysclass, - }, { - .cls = &pxa2xx_clock_sysclass, - } -}; - static int __init pxa27x_init(void) { - int i, ret = 0; + int ret = 0; if (cpu_is_pxa27x()) { @@ -456,11 +443,10 @@ static int __init pxa27x_init(void) pxa27x_init_pm(); - for (i = 0; i < ARRAY_SIZE(pxa27x_sysdev); i++) { - ret = sysdev_register(&pxa27x_sysdev[i]); - if (ret) - pr_err("failed to register sysdev[%d]\n", i); - } + register_syscore_ops(&pxa_irq_syscore_ops); + register_syscore_ops(&pxa2xx_mfp_syscore_ops); + register_syscore_ops(&pxa_gpio_syscore_ops); + register_syscore_ops(&pxa2xx_clock_syscore_ops); ret = platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index a7a19e1cd640..8521d7d6f1da 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -20,7 +20,8 @@ #include <linux/platform_device.h> #include <linux/irq.h> #include <linux/io.h> -#include <linux/sysdev.h> +#include <linux/syscore_ops.h> +#include <linux/i2c/pxa-i2c.h> #include <asm/mach/map.h> #include <mach/hardware.h> @@ -32,7 +33,6 @@ #include <mach/dma.h> #include <mach/regs-intc.h> #include <mach/smemc.h> -#include <plat/i2c.h> #include "generic.h" #include "devices.h" @@ -142,8 +142,7 @@ static void pxa3xx_cpu_pm_suspend(void) volatile unsigned long *p = (volatile void *)0xc0000000; unsigned long saved_data = *p; - extern void pxa3xx_cpu_suspend(void); - extern void pxa3xx_cpu_resume(void); + extern void pxa3xx_cpu_suspend(long); /* resuming from D2 requires the HSIO2/BOOT/TPM clocks enabled */ CKENA |= (1 << CKEN_BOOT) | (1 << CKEN_TPM); @@ -161,9 +160,9 @@ static void pxa3xx_cpu_pm_suspend(void) PSPR = 0x5c014000; /* overwrite with the resume address */ - *p = virt_to_phys(pxa3xx_cpu_resume); + *p = virt_to_phys(cpu_resume); - pxa3xx_cpu_suspend(); + pxa3xx_cpu_suspend(PLAT_PHYS_OFFSET - PAGE_OFFSET); *p = saved_data; @@ -363,8 +362,8 @@ static void __init pxa_init_ext_wakeup_irq(set_wake_t fn) int irq; for (irq = IRQ_WAKEUP0; irq <= IRQ_WAKEUP1; irq++) { - set_irq_chip(irq, &pxa_ext_wakeup_chip); - set_irq_handler(irq, handle_edge_irq); + irq_set_chip_and_handler(irq, &pxa_ext_wakeup_chip, + handle_edge_irq); set_irq_flags(irq, IRQF_VALID); } @@ -428,21 +427,9 @@ static struct platform_device *devices[] __initdata = { &pxa27x_device_pwm1, }; -static struct sys_device pxa3xx_sysdev[] = { - { - .cls = &pxa_irq_sysclass, - }, { - .cls = &pxa3xx_mfp_sysclass, - }, { - .cls = &pxa_gpio_sysclass, - }, { - .cls = &pxa3xx_clock_sysclass, - } -}; - static int __init pxa3xx_init(void) { - int i, ret = 0; + int ret = 0; if (cpu_is_pxa3xx()) { @@ -463,11 +450,10 @@ static int __init pxa3xx_init(void) pxa3xx_init_pm(); - for (i = 0; i < ARRAY_SIZE(pxa3xx_sysdev); i++) { - ret = sysdev_register(&pxa3xx_sysdev[i]); - if (ret) - pr_err("failed to register sysdev[%d]\n", i); - } + register_syscore_ops(&pxa_irq_syscore_ops); + register_syscore_ops(&pxa3xx_mfp_syscore_ops); + register_syscore_ops(&pxa_gpio_syscore_ops); + register_syscore_ops(&pxa3xx_clock_syscore_ops); ret = platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-pxa/pxa95x.c b/arch/arm/mach-pxa/pxa95x.c index 437980f72710..ecc82a330fad 100644 --- a/arch/arm/mach-pxa/pxa95x.c +++ b/arch/arm/mach-pxa/pxa95x.c @@ -15,9 +15,10 @@ #include <linux/init.h> #include <linux/pm.h> #include <linux/platform_device.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/irq.h> #include <linux/io.h> -#include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <mach/hardware.h> #include <mach/gpio.h> @@ -27,7 +28,6 @@ #include <mach/pm.h> #include <mach/dma.h> #include <mach/regs-intc.h> -#include <plat/i2c.h> #include "generic.h" #include "devices.h" @@ -260,16 +260,6 @@ static struct platform_device *devices[] __initdata = { &pxa27x_device_pwm1, }; -static struct sys_device pxa95x_sysdev[] = { - { - .cls = &pxa_irq_sysclass, - }, { - .cls = &pxa_gpio_sysclass, - }, { - .cls = &pxa3xx_clock_sysclass, - } -}; - static int __init pxa95x_init(void) { int ret = 0, i; @@ -293,11 +283,9 @@ static int __init pxa95x_init(void) if ((ret = pxa_init_dma(IRQ_DMA, 32))) return ret; - for (i = 0; i < ARRAY_SIZE(pxa95x_sysdev); i++) { - ret = sysdev_register(&pxa95x_sysdev[i]); - if (ret) - pr_err("failed to register sysdev[%d]\n", i); - } + register_syscore_ops(&pxa_irq_syscore_ops); + register_syscore_ops(&pxa_gpio_syscore_ops); + register_syscore_ops(&pxa3xx_clock_syscore_ops); ret = platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index 8361151be054..d130f77b6d11 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -18,7 +18,6 @@ #include <linux/init.h> #include <linux/kernel.h> -#include <linux/sysdev.h> #include <linux/platform_device.h> #include <linux/interrupt.h> #include <linux/gpio.h> @@ -32,6 +31,7 @@ #include <linux/sched.h> #include <linux/pwm_backlight.h> #include <linux/i2c.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/spi/spi.h> #include <linux/spi/spi_gpio.h> #include <linux/lis3lv02d.h> @@ -53,7 +53,6 @@ #include <mach/ohci.h> #include <mach/pxafb.h> #include <mach/mmc.h> -#include <plat/i2c.h> #include <plat/pxa3xx_nand.h> #include "generic.h" @@ -597,7 +596,7 @@ static void __init raumfeld_lcd_init(void) { int ret; - set_pxa_fb_info(&raumfeld_sharp_lcd_info); + pxa_set_fb_info(NULL, &raumfeld_sharp_lcd_info); /* Earlier devices had the backlight regulator controlled * via PWM, later versions use another controller for that */ diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c index c1ca8cb467fc..fee97a935122 100644 --- a/arch/arm/mach-pxa/saar.c +++ b/arch/arm/mach-pxa/saar.c @@ -20,6 +20,7 @@ #include <linux/delay.h> #include <linux/fb.h> #include <linux/i2c.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/smc91x.h> #include <linux/mfd/da903x.h> #include <linux/mtd/mtd.h> @@ -31,7 +32,6 @@ #include <asm/mach/flash.h> #include <mach/pxa930.h> -#include <plat/i2c.h> #include <mach/pxafb.h> #include "devices.h" @@ -473,7 +473,7 @@ static struct pxafb_mach_info saar_lcd_info = { static void __init saar_init_lcd(void) { - set_pxa_fb_info(&saar_lcd_info); + pxa_set_fb_info(NULL, &saar_lcd_info); } #else static inline void saar_init_lcd(void) {} diff --git a/arch/arm/mach-pxa/saarb.c b/arch/arm/mach-pxa/saarb.c index e497922f761a..9322fe527c7f 100644 --- a/arch/arm/mach-pxa/saarb.c +++ b/arch/arm/mach-pxa/saarb.c @@ -13,6 +13,7 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/i2c.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/mfd/88pm860x.h> #include <asm/mach-types.h> @@ -24,8 +25,6 @@ #include <mach/mfp-pxa930.h> #include <mach/gpio.h> -#include <plat/i2c.h> - #include "generic.h" #define SAARB_NR_IRQS (IRQ_BOARD_START + 40) diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S index c551da86baf6..6f5368899d84 100644 --- a/arch/arm/mach-pxa/sleep.S +++ b/arch/arm/mach-pxa/sleep.S @@ -22,133 +22,26 @@ .text -pxa_cpu_save_cp: - @ get coprocessor registers - mrc p14, 0, r3, c6, c0, 0 @ clock configuration, for turbo mode - mrc p15, 0, r4, c15, c1, 0 @ CP access reg - mrc p15, 0, r5, c13, c0, 0 @ PID - mrc p15, 0, r6, c3, c0, 0 @ domain ID - mrc p15, 0, r7, c2, c0, 0 @ translation table base addr - mrc p15, 0, r8, c1, c1, 0 @ auxiliary control reg - mrc p15, 0, r9, c1, c0, 0 @ control reg - - bic r3, r3, #2 @ clear frequency change bit - - @ store them plus current virtual stack ptr on stack - mov r10, sp - stmfd sp!, {r3 - r10} - - mov pc, lr - -pxa_cpu_save_sp: - @ preserve phys address of stack - mov r0, sp - str lr, [sp, #-4]! - bl sleep_phys_sp - ldr r1, =sleep_save_sp - str r0, [r1] - ldr pc, [sp], #4 - #ifdef CONFIG_PXA3xx /* * pxa3xx_cpu_suspend() - forces CPU into sleep state (S2D3C4) * - * NOTE: unfortunately, pxa_cpu_save_cp can not be reused here since - * the auxiliary control register address is different between pxa3xx - * and pxa{25x,27x} + * r0 = v:p offset */ - ENTRY(pxa3xx_cpu_suspend) #ifndef CONFIG_IWMMXT mra r2, r3, acc0 #endif stmfd sp!, {r2 - r12, lr} @ save registers on stack - - mrc p14, 0, r3, c6, c0, 0 @ clock configuration, for turbo mode - mrc p15, 0, r4, c15, c1, 0 @ CP access reg - mrc p15, 0, r5, c13, c0, 0 @ PID - mrc p15, 0, r6, c3, c0, 0 @ domain ID - mrc p15, 0, r7, c2, c0, 0 @ translation table base addr - mrc p15, 0, r8, c1, c0, 1 @ auxiliary control reg - mrc p15, 0, r9, c1, c0, 0 @ control reg - - bic r3, r3, #2 @ clear frequency change bit - - @ store them plus current virtual stack ptr on stack - mov r10, sp - stmfd sp!, {r3 - r10} - - @ store physical address of stack pointer - mov r0, sp - bl sleep_phys_sp - ldr r1, =sleep_save_sp - str r0, [r1] - - @ clean data cache - bl xsc3_flush_kern_cache_all + mov r1, r0 + ldr r3, =pxa_cpu_resume @ resume function + bl cpu_suspend mov r0, #0x06 @ S2D3C4 mode mcr p14, 0, r0, c7, c0, 0 @ enter sleep 20: b 20b @ waiting for sleep - - .data - .align 5 -/* - * pxa3xx_cpu_resume - */ - -ENTRY(pxa3xx_cpu_resume) - - mov r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE @ set SVC, irqs off - msr cpsr_c, r0 - - ldr r0, sleep_save_sp @ stack phys addr - ldmfd r0, {r3 - r9, sp} @ CP regs + virt stack ptr - - mov r1, #0 - mcr p15, 0, r1, c7, c7, 0 @ invalidate I & D caches, BTB - mcr p15, 0, r1, c7, c10, 4 @ drain write (&fill) buffer - mcr p15, 0, r1, c7, c5, 4 @ flush prefetch buffer - mcr p15, 0, r1, c8, c7, 0 @ invalidate I & D TLBs - - mcr p14, 0, r3, c6, c0, 0 @ clock configuration, turbo mode. - mcr p15, 0, r4, c15, c1, 0 @ CP access reg - mcr p15, 0, r5, c13, c0, 0 @ PID - mcr p15, 0, r6, c3, c0, 0 @ domain ID - mcr p15, 0, r7, c2, c0, 0 @ translation table base addr - mcr p15, 0, r8, c1, c0, 1 @ auxiliary control reg - - @ temporarily map resume_turn_on_mmu into the page table, - @ otherwise prefetch abort occurs after MMU is turned on - mov r1, r7 - bic r1, r1, #0x00ff - bic r1, r1, #0x3f00 - ldr r2, =0x542e - - adr r3, resume_turn_on_mmu - mov r3, r3, lsr #20 - orr r4, r2, r3, lsl #20 - ldr r5, [r1, r3, lsl #2] - str r4, [r1, r3, lsl #2] - - @ Mapping page table address in the page table - mov r6, r1, lsr #20 - orr r7, r2, r6, lsl #20 - ldr r8, [r1, r6, lsl #2] - str r7, [r1, r6, lsl #2] - - ldr r2, =pxa3xx_resume_after_mmu @ absolute virtual address - b resume_turn_on_mmu @ cache align execution - - .text -pxa3xx_resume_after_mmu: - /* restore the temporary mapping */ - str r5, [r1, r3, lsl #2] - str r8, [r1, r6, lsl #2] - b resume_after_mmu - #endif /* CONFIG_PXA3xx */ #ifdef CONFIG_PXA27x @@ -158,28 +51,23 @@ pxa3xx_resume_after_mmu: * Forces CPU into sleep state. * * r0 = value for PWRMODE M field for desired sleep state + * r1 = v:p offset */ - ENTRY(pxa27x_cpu_suspend) #ifndef CONFIG_IWMMXT mra r2, r3, acc0 #endif stmfd sp!, {r2 - r12, lr} @ save registers on stack - - bl pxa_cpu_save_cp - - mov r5, r0 @ save sleep mode - bl pxa_cpu_save_sp - - @ clean data cache - bl xscale_flush_kern_cache_all + mov r4, r0 @ save sleep mode + ldr r3, =pxa_cpu_resume @ resume function + bl cpu_suspend @ Put the processor to sleep @ (also workaround for sighting 28071) @ prepare value for sleep mode - mov r1, r5 @ sleep mode + mov r1, r4 @ sleep mode @ prepare pointer to physical address 0 (virtual mapping in generic.c) mov r2, #UNCACHED_PHYS_0 @@ -216,21 +104,16 @@ ENTRY(pxa27x_cpu_suspend) * Forces CPU into sleep state. * * r0 = value for PWRMODE M field for desired sleep state + * r1 = v:p offset */ ENTRY(pxa25x_cpu_suspend) stmfd sp!, {r2 - r12, lr} @ save registers on stack - - bl pxa_cpu_save_cp - - mov r5, r0 @ save sleep mode - bl pxa_cpu_save_sp - - @ clean data cache - bl xscale_flush_kern_cache_all - + mov r4, r0 @ save sleep mode + ldr r3, =pxa_cpu_resume @ resume function + bl cpu_suspend @ prepare value for sleep mode - mov r1, r5 @ sleep mode + mov r1, r4 @ sleep mode @ prepare pointer to physical address 0 (virtual mapping in generic.c) mov r2, #UNCACHED_PHYS_0 @@ -317,53 +200,9 @@ pxa_cpu_do_suspend: * pxa_cpu_resume() * * entry point from bootloader into kernel during resume - * - * Note: Yes, part of the following code is located into the .data section. - * This is to allow sleep_save_sp to be accessed with a relative load - * while we can't rely on any MMU translation. We could have put - * sleep_save_sp in the .text section as well, but some setups might - * insist on it to be truly read-only. */ - - .data - .align 5 -ENTRY(pxa_cpu_resume) - mov r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE @ set SVC, irqs off - msr cpsr_c, r0 - - ldr r0, sleep_save_sp @ stack phys addr - ldr r2, =resume_after_mmu @ its absolute virtual address - ldmfd r0, {r3 - r9, sp} @ CP regs + virt stack ptr - - mov r1, #0 - mcr p15, 0, r1, c8, c7, 0 @ invalidate I & D TLBs - mcr p15, 0, r1, c7, c7, 0 @ invalidate I & D caches, BTB - - mcr p14, 0, r3, c6, c0, 0 @ clock configuration, turbo mode. - mcr p15, 0, r4, c15, c1, 0 @ CP access reg - mcr p15, 0, r5, c13, c0, 0 @ PID - mcr p15, 0, r6, c3, c0, 0 @ domain ID - mcr p15, 0, r7, c2, c0, 0 @ translation table base addr - mcr p15, 0, r8, c1, c1, 0 @ auxiliary control reg - b resume_turn_on_mmu @ cache align execution - .align 5 -resume_turn_on_mmu: - mcr p15, 0, r9, c1, c0, 0 @ turn on MMU, caches, etc. - - @ Let us ensure we jump to resume_after_mmu only when the mcr above - @ actually took effect. They call it the "cpwait" operation. - mrc p15, 0, r0, c2, c0, 0 @ queue a dependency on CP15 - sub pc, r2, r0, lsr #32 @ jump to virtual addr - nop - nop - nop - -sleep_save_sp: - .word 0 @ preserve stack phys ptr here - - .text -resume_after_mmu: +pxa_cpu_resume: ldmfd sp!, {r2, r3} #ifndef CONFIG_IWMMXT mar acc0, r2, r3 diff --git a/arch/arm/mach-pxa/smemc.c b/arch/arm/mach-pxa/smemc.c index 232b7316ec08..79923058d10f 100644 --- a/arch/arm/mach-pxa/smemc.c +++ b/arch/arm/mach-pxa/smemc.c @@ -6,7 +6,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/io.h> -#include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <mach/hardware.h> #include <mach/smemc.h> @@ -16,7 +16,7 @@ static unsigned long msc[2]; static unsigned long sxcnfg, memclkcfg; static unsigned long csadrcfg[4]; -static int pxa3xx_smemc_suspend(struct sys_device *dev, pm_message_t state) +static int pxa3xx_smemc_suspend(void) { msc[0] = __raw_readl(MSC0); msc[1] = __raw_readl(MSC1); @@ -30,7 +30,7 @@ static int pxa3xx_smemc_suspend(struct sys_device *dev, pm_message_t state) return 0; } -static int pxa3xx_smemc_resume(struct sys_device *dev) +static void pxa3xx_smemc_resume(void) { __raw_writel(msc[0], MSC0); __raw_writel(msc[1], MSC1); @@ -40,34 +40,19 @@ static int pxa3xx_smemc_resume(struct sys_device *dev) __raw_writel(csadrcfg[1], CSADRCFG1); __raw_writel(csadrcfg[2], CSADRCFG2); __raw_writel(csadrcfg[3], CSADRCFG3); - - return 0; } -static struct sysdev_class smemc_sysclass = { - .name = "smemc", +static struct syscore_ops smemc_syscore_ops = { .suspend = pxa3xx_smemc_suspend, .resume = pxa3xx_smemc_resume, }; -static struct sys_device smemc_sysdev = { - .id = 0, - .cls = &smemc_sysclass, -}; - static int __init smemc_init(void) { - int ret = 0; + if (cpu_is_pxa3xx()) + register_syscore_ops(&smemc_syscore_ops); - if (cpu_is_pxa3xx()) { - ret = sysdev_class_register(&smemc_sysclass); - if (ret) - return ret; - - ret = sysdev_register(&smemc_sysdev); - } - - return ret; + return 0; } subsys_initcall(smemc_init); #endif diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index b49a2c21124c..01c576963e94 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -19,6 +19,7 @@ #include <linux/gpio.h> #include <linux/leds.h> #include <linux/i2c.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/i2c/pca953x.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> @@ -47,8 +48,6 @@ #include <mach/sharpsl_pm.h> #include <mach/smemc.h> -#include <plat/i2c.h> - #include "generic.h" #include "devices.h" @@ -725,7 +724,7 @@ static struct pxafb_mach_info spitz_pxafb_info = { static void __init spitz_lcd_init(void) { - set_pxa_fb_info(&spitz_pxafb_info); + pxa_set_fb_info(NULL, &spitz_pxafb_info); } #else static inline void spitz_lcd_init(void) {} diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c index 9a14fdb83c82..cb5611daf5fe 100644 --- a/arch/arm/mach-pxa/stargate2.c +++ b/arch/arm/mach-pxa/stargate2.c @@ -25,6 +25,7 @@ #include <linux/mtd/plat-ram.h> #include <linux/mtd/partitions.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/i2c/pcf857x.h> #include <linux/i2c/at24.h> #include <linux/smc91x.h> @@ -43,7 +44,6 @@ #include <asm/mach/flash.h> #include <mach/pxa27x.h> -#include <plat/i2c.h> #include <mach/mmc.h> #include <mach/udc.h> #include <mach/pxa27x-udc.h> diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c index 9cecf8366db8..53d4a472b699 100644 --- a/arch/arm/mach-pxa/tavorevb.c +++ b/arch/arm/mach-pxa/tavorevb.c @@ -466,7 +466,7 @@ static void __init tavorevb_init_lcd(void) { platform_device_register(&tavorevb_backlight_devices[0]); platform_device_register(&tavorevb_backlight_devices[1]); - set_pxa_fb_info(&tavorevb_lcd_info); + pxa_set_fb_info(NULL, &tavorevb_lcd_info); } #else static inline void tavorevb_init_lcd(void) {} diff --git a/arch/arm/mach-pxa/tavorevb3.c b/arch/arm/mach-pxa/tavorevb3.c index 70191a9450eb..79f4422f12f4 100644 --- a/arch/arm/mach-pxa/tavorevb3.c +++ b/arch/arm/mach-pxa/tavorevb3.c @@ -15,6 +15,7 @@ #include <linux/platform_device.h> #include <linux/interrupt.h> #include <linux/i2c.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/gpio.h> #include <linux/mfd/88pm860x.h> @@ -23,8 +24,6 @@ #include <mach/pxa930.h> -#include <plat/i2c.h> - #include "devices.h" #include "generic.h" diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c index e7f64d9b4f2d..428da3ff33a5 100644 --- a/arch/arm/mach-pxa/time.c +++ b/arch/arm/mach-pxa/time.c @@ -100,7 +100,6 @@ pxa_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *dev) static struct clock_event_device ckevt_pxa_osmr0 = { .name = "osmr0", .features = CLOCK_EVT_FEAT_ONESHOT, - .shift = 32, .rating = 200, .set_next_event = pxa_osmr0_set_next_event, .set_mode = pxa_osmr0_set_mode, @@ -135,8 +134,8 @@ static void __init pxa_timer_init(void) init_sched_clock(&cd, pxa_update_sched_clock, 32, clock_tick_rate); - ckevt_pxa_osmr0.mult = - div_sc(clock_tick_rate, NSEC_PER_SEC, ckevt_pxa_osmr0.shift); + clocksource_calc_mult_shift(&cksrc_pxa_oscr0, clock_tick_rate, 4); + clockevents_calc_mult_shift(&ckevt_pxa_osmr0, clock_tick_rate, 4); ckevt_pxa_osmr0.max_delta_ns = clockevent_delta2ns(0x7fffffff, &ckevt_pxa_osmr0); ckevt_pxa_osmr0.min_delta_ns = diff --git a/arch/arm/mach-pxa/tosa-bt.c b/arch/arm/mach-pxa/tosa-bt.c index c31e601eb49c..b9b1e5c2b290 100644 --- a/arch/arm/mach-pxa/tosa-bt.c +++ b/arch/arm/mach-pxa/tosa-bt.c @@ -81,8 +81,6 @@ static int tosa_bt_probe(struct platform_device *dev) goto err_rfk_alloc; } - rfkill_set_led_trigger_name(rfk, "tosa-bt"); - rc = rfkill_register(rfk); if (rc) goto err_rfkill; diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index af152e70cfcf..5fa145778e7d 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -34,6 +34,8 @@ #include <linux/spi/spi.h> #include <linux/spi/pxa2xx_spi.h> #include <linux/input/matrix_keypad.h> +#include <linux/i2c/pxa-i2c.h> +#include <linux/usb/gpio_vbus.h> #include <asm/setup.h> #include <asm/mach-types.h> @@ -41,7 +43,6 @@ #include <mach/pxa25x.h> #include <mach/reset.h> #include <mach/irda.h> -#include <plat/i2c.h> #include <mach/mmc.h> #include <mach/udc.h> #include <mach/tosa_bt.h> @@ -240,12 +241,20 @@ static struct scoop_pcmcia_config tosa_pcmcia_config = { /* * USB Device Controller */ -static struct pxa2xx_udc_mach_info udc_info __initdata = { +static struct gpio_vbus_mach_info tosa_udc_info = { .gpio_pullup = TOSA_GPIO_USB_PULLUP, .gpio_vbus = TOSA_GPIO_USB_IN, .gpio_vbus_inverted = 1, }; +static struct platform_device tosa_gpio_vbus = { + .name = "gpio-vbus", + .id = -1, + .dev = { + .platform_data = &tosa_udc_info, + }, +}; + /* * MMC/SD Device */ @@ -875,6 +884,11 @@ static struct platform_device sharpsl_rom_device = { .dev.platform_data = &sharpsl_rom_data, }; +static struct platform_device wm9712_device = { + .name = "wm9712-codec", + .id = -1, +}; + static struct platform_device *devices[] __initdata = { &tosascoop_device, &tosascoop_jc_device, @@ -885,6 +899,8 @@ static struct platform_device *devices[] __initdata = { &tosaled_device, &tosa_bt_device, &sharpsl_rom_device, + &wm9712_device, + &tosa_gpio_vbus, }; static void tosa_poweroff(void) @@ -931,7 +947,6 @@ static void __init tosa_init(void) dummy = gpiochip_reserve(TOSA_TC6393XB_GPIO_BASE, 16); pxa_set_mci_info(&tosa_mci_platform_data); - pxa_set_udc_info(&udc_info); pxa_set_ficp_info(&tosa_ficp_platform_data); pxa_set_i2c_info(NULL); pxa_set_ac97_info(NULL); diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c index 423261d63d07..687417a93698 100644 --- a/arch/arm/mach-pxa/trizeps4.c +++ b/arch/arm/mach-pxa/trizeps4.c @@ -15,7 +15,6 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/platform_device.h> -#include <linux/sysdev.h> #include <linux/interrupt.h> #include <linux/sched.h> #include <linux/bitops.h> @@ -26,6 +25,7 @@ #include <linux/dm9000.h> #include <linux/mtd/physmap.h> #include <linux/mtd/partitions.h> +#include <linux/i2c/pxa-i2c.h> #include <asm/types.h> #include <asm/setup.h> @@ -47,7 +47,6 @@ #include <mach/irda.h> #include <mach/ohci.h> #include <mach/smemc.h> -#include <plat/i2c.h> #include "generic.h" #include "devices.h" @@ -516,9 +515,9 @@ static void __init trizeps4_init(void) pxa_set_stuart_info(NULL); if (0) /* dont know how to determine LCD */ - set_pxa_fb_info(&sharp_lcd); + pxa_set_fb_info(NULL, &sharp_lcd); else - set_pxa_fb_info(&toshiba_lcd); + pxa_set_fb_info(NULL, &toshiba_lcd); pxa_set_mci_info(&trizeps4_mci_platform_data); #ifndef STATUS_LEDS_ON_STUART_PINS diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c index 49eeeab23689..903218eab56d 100644 --- a/arch/arm/mach-pxa/viper.c +++ b/arch/arm/mach-pxa/viper.c @@ -36,6 +36,7 @@ #include <linux/gpio.h> #include <linux/jiffies.h> #include <linux/i2c-gpio.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/serial_8250.h> #include <linux/smc91x.h> #include <linux/pwm_backlight.h> @@ -43,11 +44,11 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> +#include <linux/syscore_ops.h> #include <mach/pxa25x.h> #include <mach/audio.h> #include <mach/pxafb.h> -#include <plat/i2c.h> #include <mach/regs-uart.h> #include <mach/arcom-pcmcia.h> #include <mach/viper.h> @@ -130,20 +131,19 @@ static u8 viper_hw_version(void) return v1; } -/* CPU sysdev */ -static int viper_cpu_suspend(struct sys_device *sysdev, pm_message_t state) +/* CPU system core operations. */ +static int viper_cpu_suspend(void) { viper_icr_set_bit(VIPER_ICR_R_DIS); return 0; } -static int viper_cpu_resume(struct sys_device *sysdev) +static void viper_cpu_resume(void) { viper_icr_clear_bit(VIPER_ICR_R_DIS); - return 0; } -static struct sysdev_driver viper_cpu_sysdev_driver = { +static struct syscore_ops viper_cpu_syscore_ops = { .suspend = viper_cpu_suspend, .resume = viper_cpu_resume, }; @@ -310,14 +310,14 @@ static void __init viper_init_irq(void) /* setup ISA IRQs */ for (level = 0; level < ARRAY_SIZE(viper_isa_irqs); level++) { isa_irq = viper_bit_to_irq(level); - set_irq_chip(isa_irq, &viper_irq_chip); - set_irq_handler(isa_irq, handle_edge_irq); + irq_set_chip_and_handler(isa_irq, &viper_irq_chip, + handle_edge_irq); set_irq_flags(isa_irq, IRQF_VALID | IRQF_PROBE); } - set_irq_chained_handler(gpio_to_irq(VIPER_CPLD_GPIO), + irq_set_chained_handler(gpio_to_irq(VIPER_CPLD_GPIO), viper_irq_handler); - set_irq_type(gpio_to_irq(VIPER_CPLD_GPIO), IRQ_TYPE_EDGE_BOTH); + irq_set_irq_type(gpio_to_irq(VIPER_CPLD_GPIO), IRQ_TYPE_EDGE_BOTH); } /* Flat Panel */ @@ -932,7 +932,7 @@ static void __init viper_init(void) /* Wake-up serial console */ viper_init_serial_gpio(); - set_pxa_fb_info(&fb_info); + pxa_set_fb_info(NULL, &fb_info); /* v1 hardware cannot use the datacs line */ version = viper_hw_version(); @@ -945,7 +945,7 @@ static void __init viper_init(void) viper_init_vcore_gpios(); viper_init_cpufreq(); - sysdev_driver_register(&cpu_sysdev_class, &viper_cpu_sysdev_driver); + register_syscore_ops(&viper_cpu_syscore_ops); if (version) { pr_info("viper: hardware v%di%d detected. " diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c index b9b579715ff6..67bd41488bf8 100644 --- a/arch/arm/mach-pxa/vpac270.c +++ b/arch/arm/mach-pxa/vpac270.c @@ -16,7 +16,6 @@ #include <linux/gpio_keys.h> #include <linux/input.h> #include <linux/gpio.h> -#include <linux/sysdev.h> #include <linux/usb/gpio_vbus.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> @@ -26,6 +25,7 @@ #include <linux/ucb1400.h> #include <linux/ata_platform.h> #include <linux/regulator/max1586.h> +#include <linux/i2c/pxa-i2c.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -40,8 +40,6 @@ #include <mach/udc.h> #include <mach/pata_pxa.h> -#include <plat/i2c.h> - #include "generic.h" #include "devices.h" @@ -573,7 +571,7 @@ static void __init vpac270_lcd_init(void) } vpac270_lcd_screen.pxafb_lcd_power = vpac270_lcd_power; - set_pxa_fb_info(&vpac270_lcd_screen); + pxa_set_fb_info(NULL, &vpac270_lcd_screen); return; err2: diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c index 51c0281c6e0a..f55f8f2e0db3 100644 --- a/arch/arm/mach-pxa/xcep.c +++ b/arch/arm/mach-pxa/xcep.c @@ -16,6 +16,7 @@ #include <linux/platform_device.h> #include <linux/i2c.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/smc91x.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> @@ -26,8 +27,6 @@ #include <asm/mach/irq.h> #include <asm/mach/map.h> -#include <plat/i2c.h> - #include <mach/hardware.h> #include <mach/pxa2xx-regs.h> #include <mach/mfp-pxa25x.h> diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c index a323e076129e..fbe9e02e2f9f 100644 --- a/arch/arm/mach-pxa/z2.c +++ b/arch/arm/mach-pxa/z2.c @@ -29,6 +29,7 @@ #include <linux/gpio_keys.h> #include <linux/delay.h> #include <linux/regulator/machine.h> +#include <linux/i2c/pxa-i2c.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -40,8 +41,6 @@ #include <mach/mmc.h> #include <plat/pxa27x_keypad.h> -#include <plat/i2c.h> - #include "generic.h" #include "devices.h" @@ -92,13 +91,13 @@ static unsigned long z2_pin_config[] = { GPIO47_STUART_TXD, /* Keypad */ - GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH, - GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH, - GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH, - GPIO34_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH, - GPIO38_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH, - GPIO16_KP_MKIN_5 | WAKEUP_ON_LEVEL_HIGH, - GPIO17_KP_MKIN_6 | WAKEUP_ON_LEVEL_HIGH, + GPIO100_KP_MKIN_0, + GPIO101_KP_MKIN_1, + GPIO102_KP_MKIN_2, + GPIO34_KP_MKIN_3, + GPIO38_KP_MKIN_4, + GPIO16_KP_MKIN_5, + GPIO17_KP_MKIN_6, GPIO103_KP_MKOUT_0, GPIO104_KP_MKOUT_1, GPIO105_KP_MKOUT_2, @@ -139,8 +138,7 @@ static unsigned long z2_pin_config[] = { GPIO1_GPIO, /* Power button */ GPIO37_GPIO, /* Headphone detect */ GPIO98_GPIO, /* Lid switch */ - GPIO14_GPIO, /* WiFi Reset */ - GPIO15_GPIO, /* WiFi Power */ + GPIO14_GPIO, /* WiFi Power */ GPIO24_GPIO, /* WiFi CS */ GPIO36_GPIO, /* WiFi IRQ */ GPIO88_GPIO, /* LCD CS */ @@ -205,7 +203,7 @@ static struct platform_pwm_backlight_data z2_backlight_data[] = { /* Keypad Backlight */ .pwm_id = 1, .max_brightness = 1023, - .dft_brightness = 512, + .dft_brightness = 0, .pwm_period_ns = 1260320, }, [1] = { @@ -272,7 +270,7 @@ static struct pxafb_mach_info z2_lcd_screen = { static void __init z2_lcd_init(void) { - set_pxa_fb_info(&z2_lcd_screen); + pxa_set_fb_info(NULL, &z2_lcd_screen); } #else static inline void z2_lcd_init(void) {} @@ -310,12 +308,12 @@ struct gpio_led z2_gpio_leds[] = { .active_low = 1, }, { .name = "z2:green:charged", - .default_trigger = "none", + .default_trigger = "mmc0", .gpio = GPIO85_ZIPITZ2_LED_CHARGED, .active_low = 1, }, { .name = "z2:amber:charging", - .default_trigger = "none", + .default_trigger = "Z2-charging-or-full", .gpio = GPIO83_ZIPITZ2_LED_CHARGING, .active_low = 1, }, @@ -428,8 +426,22 @@ static inline void z2_mkp_init(void) {} ******************************************************************************/ #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) static struct gpio_keys_button z2_pxa_buttons[] = { - {KEY_POWER, GPIO1_ZIPITZ2_POWER_BUTTON, 0, "Power Button" }, - {KEY_CLOSE, GPIO98_ZIPITZ2_LID_BUTTON, 0, "Lid Button" }, + { + .code = KEY_POWER, + .gpio = GPIO1_ZIPITZ2_POWER_BUTTON, + .active_low = 0, + .desc = "Power Button", + .wakeup = 1, + .type = EV_KEY, + }, + { + .code = SW_LID, + .gpio = GPIO98_ZIPITZ2_LID_BUTTON, + .active_low = 1, + .desc = "Lid Switch", + .wakeup = 0, + .type = EV_SW, + }, }; static struct gpio_keys_platform_data z2_pxa_keys_data = { @@ -462,9 +474,9 @@ static struct z2_battery_info batt_chip_info = { .batt_I2C_addr = 0x55, .batt_I2C_reg = 2, .charge_gpio = GPIO0_ZIPITZ2_AC_DETECT, - .min_voltage = 2400000, - .max_voltage = 3700000, - .batt_div = 69, + .min_voltage = 3475000, + .max_voltage = 4190000, + .batt_div = 59, .batt_mult = 1000000, .batt_tech = POWER_SUPPLY_TECHNOLOGY_LION, .batt_name = "Z2", @@ -498,26 +510,16 @@ static int z2_lbs_spi_setup(struct spi_device *spi) { int ret = 0; - ret = gpio_request(GPIO15_ZIPITZ2_WIFI_POWER, "WiFi Power"); + ret = gpio_request(GPIO14_ZIPITZ2_WIFI_POWER, "WiFi Power"); if (ret) goto err; - ret = gpio_direction_output(GPIO15_ZIPITZ2_WIFI_POWER, 1); + ret = gpio_direction_output(GPIO14_ZIPITZ2_WIFI_POWER, 1); if (ret) goto err2; - ret = gpio_request(GPIO14_ZIPITZ2_WIFI_RESET, "WiFi Reset"); - if (ret) - goto err2; - - ret = gpio_direction_output(GPIO14_ZIPITZ2_WIFI_RESET, 0); - if (ret) - goto err3; - - /* Reset the card */ + /* Wait until card is powered on */ mdelay(180); - gpio_set_value(GPIO14_ZIPITZ2_WIFI_RESET, 1); - mdelay(20); spi->bits_per_word = 16; spi->mode = SPI_MODE_2, @@ -526,22 +528,18 @@ static int z2_lbs_spi_setup(struct spi_device *spi) return 0; -err3: - gpio_free(GPIO14_ZIPITZ2_WIFI_RESET); err2: - gpio_free(GPIO15_ZIPITZ2_WIFI_POWER); + gpio_free(GPIO14_ZIPITZ2_WIFI_POWER); err: return ret; }; static int z2_lbs_spi_teardown(struct spi_device *spi) { - gpio_set_value(GPIO14_ZIPITZ2_WIFI_RESET, 0); - gpio_set_value(GPIO15_ZIPITZ2_WIFI_POWER, 0); - gpio_free(GPIO14_ZIPITZ2_WIFI_RESET); - gpio_free(GPIO15_ZIPITZ2_WIFI_POWER); - return 0; + gpio_set_value(GPIO14_ZIPITZ2_WIFI_POWER, 0); + gpio_free(GPIO14_ZIPITZ2_WIFI_POWER); + return 0; }; static struct pxa2xx_spi_chip z2_lbs_chip_info = { diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index f4b053b35815..00363c7ac182 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -25,6 +25,7 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> #include <linux/i2c.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/i2c/pca953x.h> #include <linux/apm-emulation.h> #include <linux/can/platform/mcp251x.h> @@ -33,8 +34,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/i2c.h> - #include <mach/pxa2xx-regs.h> #include <mach/regs-uart.h> #include <mach/ohci.h> @@ -137,22 +136,23 @@ static void __init zeus_init_irq(void) /* Peripheral IRQs. It would be nice to move those inside driver configuration, but it is not supported at the moment. */ - set_irq_type(gpio_to_irq(ZEUS_AC97_GPIO), IRQ_TYPE_EDGE_RISING); - set_irq_type(gpio_to_irq(ZEUS_WAKEUP_GPIO), IRQ_TYPE_EDGE_RISING); - set_irq_type(gpio_to_irq(ZEUS_PTT_GPIO), IRQ_TYPE_EDGE_RISING); - set_irq_type(gpio_to_irq(ZEUS_EXTGPIO_GPIO), IRQ_TYPE_EDGE_FALLING); - set_irq_type(gpio_to_irq(ZEUS_CAN_GPIO), IRQ_TYPE_EDGE_FALLING); + irq_set_irq_type(gpio_to_irq(ZEUS_AC97_GPIO), IRQ_TYPE_EDGE_RISING); + irq_set_irq_type(gpio_to_irq(ZEUS_WAKEUP_GPIO), IRQ_TYPE_EDGE_RISING); + irq_set_irq_type(gpio_to_irq(ZEUS_PTT_GPIO), IRQ_TYPE_EDGE_RISING); + irq_set_irq_type(gpio_to_irq(ZEUS_EXTGPIO_GPIO), + IRQ_TYPE_EDGE_FALLING); + irq_set_irq_type(gpio_to_irq(ZEUS_CAN_GPIO), IRQ_TYPE_EDGE_FALLING); /* Setup ISA IRQs */ for (level = 0; level < ARRAY_SIZE(zeus_isa_irqs); level++) { isa_irq = zeus_bit_to_irq(level); - set_irq_chip(isa_irq, &zeus_irq_chip); - set_irq_handler(isa_irq, handle_edge_irq); + irq_set_chip_and_handler(isa_irq, &zeus_irq_chip, + handle_edge_irq); set_irq_flags(isa_irq, IRQF_VALID | IRQF_PROBE); } - set_irq_type(gpio_to_irq(ZEUS_ISA_GPIO), IRQ_TYPE_EDGE_RISING); - set_irq_chained_handler(gpio_to_irq(ZEUS_ISA_GPIO), zeus_irq_handler); + irq_set_irq_type(gpio_to_irq(ZEUS_ISA_GPIO), IRQ_TYPE_EDGE_RISING); + irq_set_chained_handler(gpio_to_irq(ZEUS_ISA_GPIO), zeus_irq_handler); } @@ -676,7 +676,7 @@ static struct pxa2xx_udc_mach_info zeus_udc_info = { static void zeus_power_off(void) { local_irq_disable(); - pxa27x_cpu_suspend(PWRMODE_DEEPSLEEP); + pxa27x_cpu_suspend(PWRMODE_DEEPSLEEP, PLAT_PHYS_OFFSET - PAGE_OFFSET); } #else #define zeus_power_off NULL @@ -847,7 +847,7 @@ static void __init zeus_init(void) if (zeus_setup_fb_gpios()) pr_err("Failed to setup fb gpios\n"); else - set_pxa_fb_info(&zeus_fb_info); + pxa_set_fb_info(NULL, &zeus_fb_info); pxa_set_mci_info(&zeus_mci_platform_data); pxa_set_udc_info(&zeus_udc_info); diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c index a4c784aab764..5821185f77ab 100644 --- a/arch/arm/mach-pxa/zylonite.c +++ b/arch/arm/mach-pxa/zylonite.c @@ -208,7 +208,7 @@ static void __init zylonite_init_lcd(void) platform_device_register(&zylonite_backlight_device); if (lcd_id & 0x20) { - set_pxa_fb_info(&zylonite_sharp_lcd_info); + pxa_set_fb_info(NULL, &zylonite_sharp_lcd_info); return; } @@ -220,7 +220,7 @@ static void __init zylonite_init_lcd(void) else zylonite_toshiba_lcd_info.modes = &toshiba_ltm04c380k_mode; - set_pxa_fb_info(&zylonite_toshiba_lcd_info); + pxa_set_fb_info(NULL, &zylonite_toshiba_lcd_info); } #else static inline void zylonite_init_lcd(void) {} diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c index 3aa73b3e33f2..93c64d8d7de9 100644 --- a/arch/arm/mach-pxa/zylonite_pxa300.c +++ b/arch/arm/mach-pxa/zylonite_pxa300.c @@ -17,11 +17,11 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/i2c.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/i2c/pca953x.h> #include <linux/gpio.h> #include <mach/pxa300.h> -#include <plat/i2c.h> #include <mach/zylonite.h> #include "generic.h" |