aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-s3c2410/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-s3c2410/Kconfig')
-rw-r--r--arch/arm/mach-s3c2410/Kconfig154
1 files changed, 0 insertions, 154 deletions
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 5261a7ed0999..68d89cb96af0 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -2,42 +2,6 @@
#
# Licensed under GPLv2
-config CPU_S3C2410
- bool
- depends on ARCH_S3C2410
- select CPU_ARM920T
- select S3C2410_CLOCK
- select CPU_LLSERIAL_S3C2410
- select S3C2410_PM if PM
- select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX
- help
- Support for S3C2410 and S3C2410A family from the S3C24XX line
- of Samsung Mobile CPUs.
-
-config CPU_S3C2410_DMA
- bool
- depends on S3C2410_DMA && (CPU_S3C2410 || CPU_S3C2442)
- default y if CPU_S3C2410 || CPU_S3C2442
- help
- DMA device selection for S3C2410 and compatible CPUs
-
-config S3C2410_PM
- bool
- help
- Power Management code common to S3C2410 and better
-
-config SIMTEC_NOR
- bool
- help
- Internal node to specify machine has simtec NOR mapping
-
-config MACH_BAST_IDE
- bool
- select HAVE_PATA_PLATFORM
- help
- Internal node for machines with an BAST style IDE
- interface
-
# cpu frequency scaling support
config S3C2410_CPUFREQ
@@ -54,121 +18,3 @@ config S3C2410_PLLTABLE
help
Select the PLL table for the S3C2410
-menu "S3C2410 Machines"
-
-config ARCH_SMDK2410
- bool "SMDK2410/A9M2410"
- select CPU_S3C2410
- select MACH_SMDK
- help
- Say Y here if you are using the SMDK2410 or the derived module A9M2410
- <http://www.fsforth.de>
-
-config ARCH_H1940
- bool "IPAQ H1940"
- select CPU_S3C2410
- select PM_H1940 if PM
- select S3C_DEV_USB_HOST
- select S3C_DEV_NAND
- select S3C2410_SETUP_TS
- help
- Say Y here if you are using the HP IPAQ H1940
-
-config H1940BT
- tristate "Control the state of H1940 bluetooth chip"
- depends on ARCH_H1940
- select RFKILL
- help
- This is a simple driver that is able to control
- the state of built in bluetooth chip on h1940.
-
-config PM_H1940
- bool
- help
- Internal node for H1940 and related PM
-
-config MACH_N30
- bool "Acer N30 family"
- select CPU_S3C2410
- select MACH_N35
- select S3C_DEV_USB_HOST
- select S3C_DEV_NAND
- help
- Say Y here if you want suppt for the Acer N30, Acer N35,
- Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs.
-
-config MACH_N35
- bool
- help
- Internal node in order to enable support for Acer N35 if Acer N30 is
- selected.
-
-config ARCH_BAST
- bool "Simtec Electronics BAST (EB2410ITX)"
- select CPU_S3C2410
- select S3C2410_IOTIMING if S3C2410_CPUFREQ
- select PM_SIMTEC if PM
- select SIMTEC_NOR
- select MACH_BAST_IDE
- select S3C24XX_DCLK
- select ISA
- select S3C_DEV_HWMON
- select S3C_DEV_USB_HOST
- select S3C_DEV_NAND
- help
- Say Y here if you are using the Simtec Electronics EB2410ITX
- development board (also known as BAST)
-
-config MACH_OTOM
- bool "NexVision OTOM Board"
- select CPU_S3C2410
- select S3C_DEV_USB_HOST
- select S3C_DEV_NAND
- help
- Say Y here if you are using the Nex Vision OTOM board
-
-config MACH_AML_M5900
- bool "AML M5900 Series"
- select CPU_S3C2410
- select PM_SIMTEC if PM
- select S3C_DEV_USB_HOST
- help
- Say Y here if you are using the American Microsystems M5900 Series
- <http://www.amltd.com>
-
-config BAST_PC104_IRQ
- bool "BAST PC104 IRQ support"
- depends on ARCH_BAST
- default y
- help
- Say Y here to enable the PC104 IRQ routing on the
- Simtec BAST (EB2410ITX)
-
-config MACH_TCT_HAMMER
- bool "TCT Hammer Board"
- select CPU_S3C2410
- select S3C_DEV_USB_HOST
- help
- Say Y here if you are using the TinCanTools Hammer Board
- <http://www.tincantools.com>
-
-config MACH_VR1000
- bool "Thorcom VR1000"
- select PM_SIMTEC if PM
- select S3C24XX_DCLK
- select SIMTEC_NOR
- select MACH_BAST_IDE
- select CPU_S3C2410
- select S3C_DEV_USB_HOST
- help
- Say Y here if you are using the Thorcom VR1000 board.
-
-config MACH_QT2410
- bool "QT2410"
- select CPU_S3C2410
- select S3C_DEV_USB_HOST
- select S3C_DEV_NAND
- help
- Say Y here if you are using the Armzone QT2410
-
-endmenu