diff options
Diffstat (limited to '')
| -rw-r--r-- | arch/arm/mach-s3c24xx/Kconfig | 82 |
1 files changed, 41 insertions, 41 deletions
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index d56b0f7f2b20..2b6cb5f29c2d 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -17,10 +17,10 @@ config CPU_S3C2410 bool "SAMSUNG S3C2410" default y select CPU_ARM920T - select S3C2410_CLOCK select CPU_LLSERIAL_S3C2410 - select S3C2410_PM if PM + select S3C2410_CLOCK select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX + select S3C2410_PM if PM help Support for S3C2410 and S3C2410A family from the S3C24XX line of Samsung Mobile CPUs. @@ -30,8 +30,8 @@ config CPU_S3C2412 depends on ARCH_S3C24XX select CPU_ARM926T select CPU_LLSERIAL_S3C2440 - select S3C2412_PM if PM select S3C2412_DMA if S3C24XX_DMA + select S3C2412_PM if PM help Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line @@ -40,10 +40,10 @@ config CPU_S3C2416 depends on ARCH_S3C24XX select CPU_ARM926T select CPU_LLSERIAL_S3C2440 - select SAMSUNG_CLKSRC + select S3C2416_PM if PM select S3C2443_COMMON select S3C2443_DMA if S3C24XX_DMA - select S3C2416_PM if PM + select SAMSUNG_CLKSRC help Support for the S3C2416 SoC from the S3C24XX line @@ -75,9 +75,9 @@ config CPU_S3C2443 depends on ARCH_S3C24XX select CPU_ARM920T select CPU_LLSERIAL_S3C2440 - select SAMSUNG_CLKSRC select S3C2443_COMMON select S3C2443_DMA if S3C24XX_DMA + select SAMSUNG_CLKSRC help Support for the S3C2443 SoC from the S3C24XX line @@ -156,16 +156,16 @@ config MACH_AML_M5900 config ARCH_BAST bool "Simtec Electronics BAST (EB2410ITX)" + select ISA + select MACH_BAST_IDE select S3C2410_IOTIMING if S3C2410_CPUFREQ - select S3C24XX_SIMTEC_PM if PM + select S3C24XX_DCLK select S3C24XX_SIMTEC_NOR + select S3C24XX_SIMTEC_PM if PM select S3C24XX_SIMTEC_USB - select MACH_BAST_IDE - select S3C24XX_DCLK - select ISA select S3C_DEV_HWMON - select S3C_DEV_USB_HOST select S3C_DEV_NAND + select S3C_DEV_USB_HOST help Say Y here if you are using the Simtec Electronics EB2410ITX development board (also known as BAST) @@ -181,9 +181,9 @@ config BAST_PC104_IRQ config ARCH_H1940 bool "IPAQ H1940" select PM_H1940 if PM - select S3C_DEV_USB_HOST - select S3C_DEV_NAND select S3C24XX_SETUP_TS + select S3C_DEV_NAND + select S3C_DEV_USB_HOST help Say Y here if you are using the HP IPAQ H1940 @@ -203,23 +203,23 @@ config PM_H1940 config MACH_N30 bool "Acer N30 family" select MACH_N35 - select S3C_DEV_USB_HOST select S3C_DEV_NAND + select S3C_DEV_USB_HOST help Say Y here if you want suppt for the Acer N30, Acer N35, Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs. config MACH_OTOM bool "NexVision OTOM Board" - select S3C_DEV_USB_HOST select S3C_DEV_NAND + select S3C_DEV_USB_HOST help Say Y here if you are using the Nex Vision OTOM board config MACH_QT2410 bool "QT2410" - select S3C_DEV_USB_HOST select S3C_DEV_NAND + select S3C_DEV_USB_HOST help Say Y here if you are using the Armzone QT2410 @@ -239,12 +239,12 @@ config MACH_TCT_HAMMER config MACH_VR1000 bool "Thorcom VR1000" - select S3C24XX_SIMTEC_PM if PM + select MACH_BAST_IDE select S3C24XX_DCLK select S3C24XX_SIMTEC_NOR - select MACH_BAST_IDE - select S3C_DEV_USB_HOST + select S3C24XX_SIMTEC_PM if PM select S3C24XX_SIMTEC_USB + select S3C_DEV_USB_HOST help Say Y here if you are using the Thorcom VR1000 board. @@ -285,8 +285,8 @@ comment "S3C2412 Boards" config MACH_JIVE bool "Logitech Jive" - select S3C_DEV_USB_HOST select S3C_DEV_NAND + select S3C_DEV_USB_HOST help Say Y here if you are using the Logitech Jive. @@ -314,15 +314,15 @@ config MACH_SMDK2413 bool "SMDK2413" select MACH_S3C2413 select S3C24XX_SMDK - select S3C_DEV_USB_HOST select S3C_DEV_NAND + select S3C_DEV_USB_HOST help Say Y here if you are using an SMDK2413 config MACH_VSTMS bool "VMSTMS" - select S3C_DEV_USB_HOST select S3C_DEV_NAND + select S3C_DEV_USB_HOST help Say Y here if you are using an VSTMS board @@ -351,13 +351,13 @@ comment "S3C2416 Boards" config MACH_SMDK2416 bool "SMDK2416" + select S3C2416_SETUP_SDHCI select S3C24XX_SMDK select S3C_DEV_FB select S3C_DEV_HSMMC select S3C_DEV_HSMMC1 select S3C_DEV_NAND select S3C_DEV_USB_HOST - select S3C2416_SETUP_SDHCI help Say Y here if you are using an SMDK2416 @@ -379,11 +379,11 @@ comment "S3C2440 Boards" config MACH_ANUBIS bool "Simtec Electronics ANUBIS" - select S3C24XX_DCLK - select S3C24XX_SIMTEC_PM if PM select HAVE_PATA_PLATFORM - select S3C24XX_GPIO_EXTRA64 select S3C2440_XTAL_12000000 + select S3C24XX_DCLK + select S3C24XX_GPIO_EXTRA64 + select S3C24XX_SIMTEC_PM if PM select S3C_DEV_USB_HOST help Say Y here if you are using the Simtec Electronics ANUBIS @@ -391,18 +391,18 @@ config MACH_ANUBIS config MACH_AT2440EVB bool "Avantech AT2440EVB development board" - select S3C_DEV_USB_HOST select S3C_DEV_NAND + select S3C_DEV_USB_HOST help Say Y here if you are using the AT2440EVB development board config MACH_MINI2440 bool "MINI2440 development board" select EEPROM_AT24 - select NEW_LEDS select LEDS_CLASS select LEDS_TRIGGER select LEDS_TRIGGER_BACKLIGHT + select NEW_LEDS select S3C_DEV_NAND select S3C_DEV_USB_HOST help @@ -412,20 +412,20 @@ config MACH_MINI2440 config MACH_NEXCODER_2440 bool "NexVision NEXCODER 2440 Light Board" select S3C2440_XTAL_12000000 - select S3C_DEV_USB_HOST select S3C_DEV_NAND + select S3C_DEV_USB_HOST help Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board config MACH_OSIRIS bool "Simtec IM2440D20 (OSIRIS) module" + select S3C2410_IOTIMING if S3C2440_CPUFREQ + select S3C2440_XTAL_12000000 select S3C24XX_DCLK - select S3C24XX_SIMTEC_PM if PM select S3C24XX_GPIO_EXTRA128 - select S3C2440_XTAL_12000000 - select S3C2410_IOTIMING if S3C2440_CPUFREQ - select S3C_DEV_USB_HOST + select S3C24XX_SIMTEC_PM if PM select S3C_DEV_NAND + select S3C_DEV_USB_HOST help Say Y here if you are using the Simtec IM2440D20 module, also known as the Osiris. @@ -445,8 +445,8 @@ config MACH_OSIRIS_DVS config MACH_RX3715 bool "HP iPAQ rx3715" - select S3C2440_XTAL_16934400 select PM_H1940 if PM + select S3C2440_XTAL_16934400 select S3C_DEV_NAND help Say Y here if you are using the HP iPAQ rx3715. @@ -455,8 +455,8 @@ config ARCH_S3C2440 bool "SMDK2440" select S3C2440_XTAL_16934400 select S3C24XX_SMDK - select S3C_DEV_USB_HOST select S3C_DEV_NAND + select S3C_DEV_USB_HOST help Say Y here if you are using the SMDK2440. @@ -478,11 +478,11 @@ comment "S3C2442 Boards" config MACH_NEO1973_GTA02 bool "Openmoko GTA02 / Freerunner phone" + select I2C + select MACH_NEO1973 select MFD_PCF50633 select PCF50633_GPIO - select I2C select POWER_SUPPLY - select MACH_NEO1973 select S3C24XX_PWM select S3C_DEV_USB_HOST help @@ -490,13 +490,13 @@ config MACH_NEO1973_GTA02 config MACH_RX1950 bool "HP iPAQ rx1950" - select S3C24XX_DCLK - select PM_H1940 if PM select I2C - select S3C24XX_PWM - select S3C_DEV_NAND + select PM_H1940 if PM select S3C2410_IOTIMING if S3C2440_CPUFREQ select S3C2440_XTAL_16934400 + select S3C24XX_DCLK + select S3C24XX_PWM + select S3C_DEV_NAND help Say Y here if you're using HP iPAQ rx1950 |