diff options
Diffstat (limited to 'arch/arm/mach-s3c64xx/include/mach')
| -rw-r--r-- | arch/arm/mach-s3c64xx/include/mach/debug-macro.S | 38 | ||||
| -rw-r--r-- | arch/arm/mach-s3c64xx/include/mach/dma.h | 52 | ||||
| -rw-r--r-- | arch/arm/mach-s3c64xx/include/mach/gpio-samsung.h | 3 | ||||
| -rw-r--r-- | arch/arm/mach-s3c64xx/include/mach/irqs.h | 20 | ||||
| -rw-r--r-- | arch/arm/mach-s3c64xx/include/mach/pm-core.h | 9 |
5 files changed, 40 insertions, 82 deletions
diff --git a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S deleted file mode 100644 index c9b95325b672..000000000000 --- a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S +++ /dev/null @@ -1,38 +0,0 @@ -/* arch/arm/mach-s3c6400/include/mach/debug-macro.S - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* pull in the relevant register and map files. */ - -#include <linux/serial_s3c.h> -#include <mach/map.h> - - /* note, for the boot process to work we have to keep the UART - * virtual address aligned to an 1MiB boundary for the L1 - * mapping the head code makes. We keep the UART virtual address - * aligned and add in the offset when we load the value here. - */ - - .macro addruart, rp, rv, tmp - ldr \rp, = S3C_PA_UART - ldr \rv, = (S3C_VA_UART + S3C_PA_UART & 0xfffff) -#if CONFIG_DEBUG_S3C_UART != 0 - add \rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART) - add \rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART) -#endif - .endm - -/* include the reset of the code which will do the work, we're only - * compiling for a single cpu processor type so the default of s3c2440 - * will be fine with us. - */ - -#include <debug/samsung.S> diff --git a/arch/arm/mach-s3c64xx/include/mach/dma.h b/arch/arm/mach-s3c64xx/include/mach/dma.h index 096e14073bd9..9c739eafe95c 100644 --- a/arch/arm/mach-s3c64xx/include/mach/dma.h +++ b/arch/arm/mach-s3c64xx/include/mach/dma.h @@ -14,38 +14,38 @@ #define S3C64XX_DMA_CHAN(name) ((unsigned long)(name)) /* DMA0/SDMA0 */ -#define DMACH_UART0 S3C64XX_DMA_CHAN("uart0_tx") -#define DMACH_UART0_SRC2 S3C64XX_DMA_CHAN("uart0_rx") -#define DMACH_UART1 S3C64XX_DMA_CHAN("uart1_tx") -#define DMACH_UART1_SRC2 S3C64XX_DMA_CHAN("uart1_rx") -#define DMACH_UART2 S3C64XX_DMA_CHAN("uart2_tx") -#define DMACH_UART2_SRC2 S3C64XX_DMA_CHAN("uart2_rx") -#define DMACH_UART3 S3C64XX_DMA_CHAN("uart3_tx") -#define DMACH_UART3_SRC2 S3C64XX_DMA_CHAN("uart3_rx") -#define DMACH_PCM0_TX S3C64XX_DMA_CHAN("pcm0_tx") -#define DMACH_PCM0_RX S3C64XX_DMA_CHAN("pcm0_rx") -#define DMACH_I2S0_OUT S3C64XX_DMA_CHAN("i2s0_tx") -#define DMACH_I2S0_IN S3C64XX_DMA_CHAN("i2s0_rx") +#define DMACH_UART0 "uart0_tx" +#define DMACH_UART0_SRC2 "uart0_rx" +#define DMACH_UART1 "uart1_tx" +#define DMACH_UART1_SRC2 "uart1_rx" +#define DMACH_UART2 "uart2_tx" +#define DMACH_UART2_SRC2 "uart2_rx" +#define DMACH_UART3 "uart3_tx" +#define DMACH_UART3_SRC2 "uart3_rx" +#define DMACH_PCM0_TX "pcm0_tx" +#define DMACH_PCM0_RX "pcm0_rx" +#define DMACH_I2S0_OUT "i2s0_tx" +#define DMACH_I2S0_IN "i2s0_rx" #define DMACH_SPI0_TX S3C64XX_DMA_CHAN("spi0_tx") #define DMACH_SPI0_RX S3C64XX_DMA_CHAN("spi0_rx") -#define DMACH_HSI_I2SV40_TX S3C64XX_DMA_CHAN("i2s2_tx") -#define DMACH_HSI_I2SV40_RX S3C64XX_DMA_CHAN("i2s2_rx") +#define DMACH_HSI_I2SV40_TX "i2s2_tx" +#define DMACH_HSI_I2SV40_RX "i2s2_rx" /* DMA1/SDMA1 */ -#define DMACH_PCM1_TX S3C64XX_DMA_CHAN("pcm1_tx") -#define DMACH_PCM1_RX S3C64XX_DMA_CHAN("pcm1_rx") -#define DMACH_I2S1_OUT S3C64XX_DMA_CHAN("i2s1_tx") -#define DMACH_I2S1_IN S3C64XX_DMA_CHAN("i2s1_rx") +#define DMACH_PCM1_TX "pcm1_tx" +#define DMACH_PCM1_RX "pcm1_rx" +#define DMACH_I2S1_OUT "i2s1_tx" +#define DMACH_I2S1_IN "i2s1_rx" #define DMACH_SPI1_TX S3C64XX_DMA_CHAN("spi1_tx") #define DMACH_SPI1_RX S3C64XX_DMA_CHAN("spi1_rx") -#define DMACH_AC97_PCMOUT S3C64XX_DMA_CHAN("ac97_out") -#define DMACH_AC97_PCMIN S3C64XX_DMA_CHAN("ac97_in") -#define DMACH_AC97_MICIN S3C64XX_DMA_CHAN("ac97_mic") -#define DMACH_PWM S3C64XX_DMA_CHAN("pwm") -#define DMACH_IRDA S3C64XX_DMA_CHAN("irda") -#define DMACH_EXTERNAL S3C64XX_DMA_CHAN("external") -#define DMACH_SECURITY_RX S3C64XX_DMA_CHAN("sec_rx") -#define DMACH_SECURITY_TX S3C64XX_DMA_CHAN("sec_tx") +#define DMACH_AC97_PCMOUT "ac97_out" +#define DMACH_AC97_PCMIN "ac97_in" +#define DMACH_AC97_MICIN "ac97_mic" +#define DMACH_PWM "pwm" +#define DMACH_IRDA "irda" +#define DMACH_EXTERNAL "external" +#define DMACH_SECURITY_RX "sec_rx" +#define DMACH_SECURITY_TX "sec_tx" enum dma_ch { DMACH_MAX = 32 diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-samsung.h b/arch/arm/mach-s3c64xx/include/mach/gpio-samsung.h index 9c81fac3b2d5..1d3636512e33 100644 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-samsung.h +++ b/arch/arm/mach-s3c64xx/include/mach/gpio-samsung.h @@ -14,6 +14,8 @@ #ifndef GPIO_SAMSUNG_S3C64XX_H #define GPIO_SAMSUNG_S3C64XX_H +#ifdef CONFIG_GPIO_SAMSUNG + /* GPIO bank sizes */ #define S3C64XX_GPIO_A_NR (8) #define S3C64XX_GPIO_B_NR (7) @@ -90,5 +92,6 @@ enum s3c_gpio_number { /* define the number of gpios we need to the one after the GPQ() range */ #define GPIO_BOARD_START (S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1) +#endif /* GPIO_SAMSUNG */ #endif /* GPIO_SAMSUNG_S3C64XX_H */ diff --git a/arch/arm/mach-s3c64xx/include/mach/irqs.h b/arch/arm/mach-s3c64xx/include/mach/irqs.h index 67bbd1dd04c2..3ceb00b5de07 100644 --- a/arch/arm/mach-s3c64xx/include/mach/irqs.h +++ b/arch/arm/mach-s3c64xx/include/mach/irqs.h @@ -156,25 +156,11 @@ #define IRQ_EINT_GROUP(group, no) (IRQ_EINT_GROUP##group##_BASE + (no)) -/* Define a group of interrupts for board-specific use (eg, for MFD - * interrupt controllers). */ +/* Some boards have their own IRQs behind this */ #define IRQ_BOARD_START (IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1) -#ifdef CONFIG_MACH_WLF_CRAGG_6410 -#define IRQ_BOARD_NR 160 -#elif defined(CONFIG_SMDK6410_WM1190_EV1) -#define IRQ_BOARD_NR 64 -#elif defined(CONFIG_SMDK6410_WM1192_EV1) -#define IRQ_BOARD_NR 64 -#else -#define IRQ_BOARD_NR 16 -#endif - -#define IRQ_BOARD_END (IRQ_BOARD_START + IRQ_BOARD_NR) - -/* Set the default NR_IRQS */ - -#define NR_IRQS (IRQ_BOARD_END + 1) +/* Set the default nr_irqs, boards can override if necessary */ +#define S3C64XX_NR_IRQS IRQ_BOARD_START /* Compatibility */ diff --git a/arch/arm/mach-s3c64xx/include/mach/pm-core.h b/arch/arm/mach-s3c64xx/include/mach/pm-core.h index a30a1e3ffc6a..4a285e97afff 100644 --- a/arch/arm/mach-s3c64xx/include/mach/pm-core.h +++ b/arch/arm/mach-s3c64xx/include/mach/pm-core.h @@ -16,8 +16,11 @@ #define __MACH_S3C64XX_PM_CORE_H __FILE__ #include <linux/serial_s3c.h> +#include <linux/delay.h> #include <mach/regs-gpio.h> +#include <mach/regs-clock.h> +#include <mach/map.h> static inline void s3c_pm_debug_init_uart(void) { @@ -56,9 +59,13 @@ static inline void s3c_pm_arch_show_resume_irqs(void) /* make these defines, we currently do not have any need to change * the IRQ wake controls depending on the CPU we are running on */ - +#ifdef CONFIG_PM_SLEEP #define s3c_irqwake_eintallow ((1 << 28) - 1) #define s3c_irqwake_intallow (~0) +#else +#define s3c_irqwake_eintallow 0 +#define s3c_irqwake_intallow 0 +#endif static inline void s3c_pm_arch_update_uart(void __iomem *regs, struct pm_uart_save *save) |