diff options
Diffstat (limited to 'arch/arm/mach-u300')
-rw-r--r-- | arch/arm/mach-u300/clock.c | 6 | ||||
-rw-r--r-- | arch/arm/mach-u300/core.c | 47 | ||||
-rw-r--r-- | arch/arm/mach-u300/dummyspichip.c | 5 | ||||
-rw-r--r-- | arch/arm/mach-u300/include/mach/debug-macro.S | 11 | ||||
-rw-r--r-- | arch/arm/mach-u300/include/mach/gpio.h | 3 | ||||
-rw-r--r-- | arch/arm/mach-u300/include/mach/u300-regs.h | 2 | ||||
-rw-r--r-- | arch/arm/mach-u300/spi.c | 10 | ||||
-rw-r--r-- | arch/arm/mach-u300/u300.c | 2 |
8 files changed, 56 insertions, 30 deletions
diff --git a/arch/arm/mach-u300/clock.c b/arch/arm/mach-u300/clock.c index 60acf9e708ae..7458fc6df5c6 100644 --- a/arch/arm/mach-u300/clock.c +++ b/arch/arm/mach-u300/clock.c @@ -66,7 +66,7 @@ static DEFINE_SPINLOCK(syscon_resetreg_lock); * AMBA bus * | * +- CPU - * +- NANDIF NAND Flash interface + * +- FSMC NANDIF NAND Flash interface * +- SEMI Shared Memory interface * +- ISP Image Signal Processor (U335 only) * +- CDS (U335 only) @@ -726,7 +726,7 @@ static struct clk cpu_clk = { }; static struct clk nandif_clk = { - .name = "NANDIF", + .name = "FSMC", .parent = &amba_clk, .hw_ctrld = false, .reset = true, @@ -1259,7 +1259,7 @@ static struct clk_lookup lookups[] = { /* Connected directly to the AMBA bus */ DEF_LOOKUP("amba", &amba_clk), DEF_LOOKUP("cpu", &cpu_clk), - DEF_LOOKUP("fsmc", &nandif_clk), + DEF_LOOKUP("fsmc-nand", &nandif_clk), DEF_LOOKUP("semi", &semi_clk), #ifdef CONFIG_MACH_U300_BS335 DEF_LOOKUP("isp", &isp_clk), diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c index ea41c236be0f..aa53ee22438f 100644 --- a/arch/arm/mach-u300/core.c +++ b/arch/arm/mach-u300/core.c @@ -21,7 +21,8 @@ #include <linux/gpio.h> #include <linux/clk.h> #include <linux/err.h> -#include <mach/coh901318.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/fsmc.h> #include <asm/types.h> #include <asm/setup.h> @@ -30,6 +31,7 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> +#include <mach/coh901318.h> #include <mach/hardware.h> #include <mach/syscon.h> #include <mach/dma_channels.h> @@ -285,6 +287,13 @@ static struct resource rtc_resources[] = { */ static struct resource fsmc_resources[] = { { + .name = "nand_data", + .start = U300_NAND_CS0_PHYS_BASE, + .end = U300_NAND_CS0_PHYS_BASE + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "fsmc_regs", .start = U300_NAND_IF_PHYS_BASE, .end = U300_NAND_IF_PHYS_BASE + SZ_4K - 1, .flags = IORESOURCE_MEM, @@ -1429,11 +1438,39 @@ static struct platform_device rtc_device = { .resource = rtc_resources, }; -static struct platform_device fsmc_device = { - .name = "nandif", +static struct mtd_partition u300_partitions[] = { + { + .name = "bootrecords", + .offset = 0, + .size = SZ_128K, + }, + { + .name = "free", + .offset = SZ_128K, + .size = 8064 * SZ_1K, + }, + { + .name = "platform", + .offset = 8192 * SZ_1K, + .size = 253952 * SZ_1K, + }, +}; + +static struct fsmc_nand_platform_data nand_platform_data = { + .partitions = u300_partitions, + .nr_partitions = ARRAY_SIZE(u300_partitions), + .options = NAND_SKIP_BBTSCAN, + .width = FSMC_NAND_BW8, +}; + +static struct platform_device nand_device = { + .name = "fsmc-nand", .id = -1, - .num_resources = ARRAY_SIZE(fsmc_resources), .resource = fsmc_resources, + .num_resources = ARRAY_SIZE(fsmc_resources), + .dev = { + .platform_data = &nand_platform_data, + }, }; static struct platform_device ave_device = { @@ -1465,7 +1502,7 @@ static struct platform_device *platform_devs[] __initdata = { &keypad_device, &rtc_device, &gpio_device, - &fsmc_device, + &nand_device, &wdog_device, &ave_device }; diff --git a/arch/arm/mach-u300/dummyspichip.c b/arch/arm/mach-u300/dummyspichip.c index 5f55012b7c9e..03f793612594 100644 --- a/arch/arm/mach-u300/dummyspichip.c +++ b/arch/arm/mach-u300/dummyspichip.c @@ -46,7 +46,6 @@ static ssize_t dummy_looptest(struct device *dev, * struct, this is just used here to alter the behaviour of the chip * in order to perform tests. */ - struct pl022_config_chip *chip_info = spi->controller_data; int status; u8 txbuf[14] = {0xDE, 0xAD, 0xBE, 0xEF, 0x2B, 0xAD, 0xCA, 0xFE, 0xBA, 0xBE, 0xB1, 0x05, @@ -72,7 +71,7 @@ static ssize_t dummy_looptest(struct device *dev, * Force chip to 8 bit mode * WARNING: NEVER DO THIS IN REAL DRIVER CODE, THIS SHOULD BE STATIC! */ - chip_info->data_size = SSP_DATA_BITS_8; + spi->bits_per_word = 8; /* You should NOT DO THIS EITHER */ spi->master->setup(spi); @@ -159,7 +158,7 @@ static ssize_t dummy_looptest(struct device *dev, * Force chip to 16 bit mode * WARNING: NEVER DO THIS IN REAL DRIVER CODE, THIS SHOULD BE STATIC! */ - chip_info->data_size = SSP_DATA_BITS_16; + spi->bits_per_word = 16; /* You should NOT DO THIS EITHER */ spi->master->setup(spi); diff --git a/arch/arm/mach-u300/include/mach/debug-macro.S b/arch/arm/mach-u300/include/mach/debug-macro.S index 92c12420256f..df715707bead 100644 --- a/arch/arm/mach-u300/include/mach/debug-macro.S +++ b/arch/arm/mach-u300/include/mach/debug-macro.S @@ -10,13 +10,12 @@ */ #include <mach/hardware.h> - .macro addruart, rx, tmp + .macro addruart, rp, rv /* If we move the address using MMU, use this. */ - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, = U300_SLOW_PER_PHYS_BASE @ MMU off, physical address - ldrne \rx, = U300_SLOW_PER_VIRT_BASE @ MMU on, virtual address - orr \rx, \rx, #0x00003000 + ldr \rp, = U300_SLOW_PER_PHYS_BASE @ MMU off, physical address + ldr \rv, = U300_SLOW_PER_VIRT_BASE @ MMU on, virtual address + orr \rp, \rp, #0x00003000 + orr \rv, \rv, #0x00003000 .endm #include <asm/hardware/debug-pl01x.S> diff --git a/arch/arm/mach-u300/include/mach/gpio.h b/arch/arm/mach-u300/include/mach/gpio.h index 7b1fc984abb6..d5a71abcbaea 100644 --- a/arch/arm/mach-u300/include/mach/gpio.h +++ b/arch/arm/mach-u300/include/mach/gpio.h @@ -273,6 +273,9 @@ extern void gpio_pullup(unsigned gpio, int value); extern int gpio_get_value(unsigned gpio); extern void gpio_set_value(unsigned gpio, int value); +#define gpio_get_value_cansleep gpio_get_value +#define gpio_set_value_cansleep gpio_set_value + /* wrappers to sleep-enable the previous two functions */ static inline unsigned gpio_to_irq(unsigned gpio) { diff --git a/arch/arm/mach-u300/include/mach/u300-regs.h b/arch/arm/mach-u300/include/mach/u300-regs.h index 56721a0cd2af..8b85df4c8d8f 100644 --- a/arch/arm/mach-u300/include/mach/u300-regs.h +++ b/arch/arm/mach-u300/include/mach/u300-regs.h @@ -20,11 +20,9 @@ /* NAND Flash CS0 */ #define U300_NAND_CS0_PHYS_BASE 0x80000000 -#define U300_NAND_CS0_VIRT_BASE 0xff040000 /* NFIF */ #define U300_NAND_IF_PHYS_BASE 0x9f800000 -#define U300_NAND_IF_VIRT_BASE 0xff030000 /* AHB Peripherals */ #define U300_AHB_PER_PHYS_BASE 0xa0000000 diff --git a/arch/arm/mach-u300/spi.c b/arch/arm/mach-u300/spi.c index f0e887bea30e..00869def5420 100644 --- a/arch/arm/mach-u300/spi.c +++ b/arch/arm/mach-u300/spi.c @@ -30,8 +30,6 @@ static void select_dummy_chip(u32 chipselect) } struct pl022_config_chip dummy_chip_info = { - /* Nominally this is LOOPBACK_DISABLED, but this is our dummy chip! */ - .lbm = LOOPBACK_ENABLED, /* * available POLLING_TRANSFER and INTERRUPT_TRANSFER, * DMA_TRANSFER does not work @@ -42,14 +40,8 @@ struct pl022_config_chip dummy_chip_info = { .hierarchy = SSP_MASTER, /* 0 = drive TX even as slave, 1 = do not drive TX as slave */ .slave_tx_disable = 0, - /* LSB first */ - .endian_tx = SSP_TX_LSB, - .endian_rx = SSP_RX_LSB, - .data_size = SSP_DATA_BITS_8, /* used to be 12 in some default */ .rx_lev_trig = SSP_RX_1_OR_MORE_ELEM, .tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC, - .clk_phase = SSP_CLK_SECOND_EDGE, - .clk_pol = SSP_CLK_POL_IDLE_LOW, .ctrl_len = SSP_BITS_12, .wait_state = SSP_MWIRE_WAIT_ZERO, .duplex = SSP_MICROWIRE_CHANNEL_FULL_DUPLEX, @@ -75,7 +67,7 @@ static struct spi_board_info u300_spi_devices[] = { .bus_num = 0, /* Only one bus on this chip */ .chip_select = 0, /* Means SPI_CS_HIGH, change if e.g low CS */ - .mode = 0, + .mode = SPI_MODE_1 | SPI_LOOP, }, #endif }; diff --git a/arch/arm/mach-u300/u300.c b/arch/arm/mach-u300/u300.c index bfcda9820888..07c35a846424 100644 --- a/arch/arm/mach-u300/u300.c +++ b/arch/arm/mach-u300/u300.c @@ -61,8 +61,6 @@ static void __init u300_init_machine(void) MACHINE_START(U300, MACH_U300_STRING) /* Maintainer: Linus Walleij <linus.walleij@stericsson.com> */ - .phys_io = U300_AHB_PER_PHYS_BASE, - .io_pg_offst = ((U300_AHB_PER_VIRT_BASE) >> 18) & 0xfffc, .boot_params = BOOT_PARAMS_OFFSET, .map_io = u300_map_io, .reserve = u300_reserve, |