aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-ux500/board-mop500.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-ux500/board-mop500.c')
-rw-r--r--arch/arm/mach-ux500/board-mop500.c52
1 files changed, 16 insertions, 36 deletions
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index d453522edb0d..b03457881c4b 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -28,7 +28,7 @@
#include <linux/mfd/tps6105x.h>
#include <linux/mfd/abx500/ab8500-gpio.h>
#include <linux/mfd/abx500/ab8500-codec.h>
-#include <linux/leds-lp5521.h>
+#include <linux/platform_data/leds-lp55xx.h>
#include <linux/input.h>
#include <linux/smsc911x.h>
#include <linux/gpio_keys.h>
@@ -40,7 +40,6 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
#include <mach/hardware.h>
#include <mach/setup.h>
@@ -90,26 +89,8 @@ static struct platform_device snowball_gpio_en_3v3_regulator_dev = {
},
};
-static struct ab8500_gpio_platform_data ab8500_gpio_pdata = {
+static struct abx500_gpio_platform_data ab8500_gpio_pdata = {
.gpio_base = MOP500_AB8500_PIN_GPIO(1),
- .irq_base = MOP500_AB8500_VIR_GPIO_IRQ_BASE,
- /* config_reg is the initial configuration of ab8500 pins.
- * The pins can be configured as GPIO or alt functions based
- * on value present in GpioSel1 to GpioSel6 and AlternatFunction
- * register. This is the array of 7 configuration settings.
- * One has to compile time decide these settings. Below is the
- * explanation of these setting
- * GpioSel1 = 0x00 => Pins GPIO1 to GPIO8 are not used as GPIO
- * GpioSel2 = 0x1E => Pins GPIO10 to GPIO13 are configured as GPIO
- * GpioSel3 = 0x80 => Pin GPIO24 is configured as GPIO
- * GpioSel4 = 0x01 => Pin GPIo25 is configured as GPIO
- * GpioSel5 = 0x7A => Pins GPIO34, GPIO36 to GPIO39 are conf as GPIO
- * GpioSel6 = 0x00 => Pins GPIO41 & GPIo42 are not configured as GPIO
- * AlternaFunction = 0x00 => If Pins GPIO10 to 13 are not configured
- * as GPIO then this register selectes the alternate fucntions
- */
- .config_reg = {0x00, 0x1E, 0x80, 0x01,
- 0x7A, 0x00, 0x00},
};
/* ab8500-codec */
@@ -215,7 +196,7 @@ static struct platform_device snowball_sbnet_dev = {
},
};
-static struct ab8500_platform_data ab8500_platdata = {
+struct ab8500_platform_data ab8500_platdata = {
.irq_base = MOP500_AB8500_IRQ_BASE,
.regulator_reg_init = ab8500_regulator_reg_init,
.num_regulator_reg_init = ARRAY_SIZE(ab8500_regulator_reg_init),
@@ -320,7 +301,7 @@ static struct tc3589x_platform_data mop500_tc35892_data = {
.irq_base = MOP500_EGPIO_IRQ_BASE,
};
-static struct lp5521_led_config lp5521_pri_led[] = {
+static struct lp55xx_led_config lp5521_pri_led[] = {
[0] = {
.chan_nr = 0,
.led_current = 0x2f,
@@ -338,14 +319,14 @@ static struct lp5521_led_config lp5521_pri_led[] = {
},
};
-static struct lp5521_platform_data __initdata lp5521_pri_data = {
+static struct lp55xx_platform_data __initdata lp5521_pri_data = {
.label = "lp5521_pri",
.led_config = &lp5521_pri_led[0],
.num_channels = 3,
- .clock_mode = LP5521_CLOCK_EXT,
+ .clock_mode = LP55XX_CLOCK_EXT,
};
-static struct lp5521_led_config lp5521_sec_led[] = {
+static struct lp55xx_led_config lp5521_sec_led[] = {
[0] = {
.chan_nr = 0,
.led_current = 0x2f,
@@ -363,11 +344,11 @@ static struct lp5521_led_config lp5521_sec_led[] = {
},
};
-static struct lp5521_platform_data __initdata lp5521_sec_data = {
+static struct lp55xx_platform_data __initdata lp5521_sec_data = {
.label = "lp5521_sec",
.led_config = &lp5521_sec_led[0],
.num_channels = 3,
- .clock_mode = LP5521_CLOCK_EXT,
+ .clock_mode = LP55XX_CLOCK_EXT,
};
static struct i2c_board_info __initdata mop500_i2c0_devices[] = {
@@ -651,6 +632,7 @@ static void __init mop500_init_machine(void)
int i2c0_devs;
int i;
+ platform_device_register(&db8500_prcmu_device);
mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;
mop500_pinmaps_init();
@@ -685,6 +667,7 @@ static void __init snowball_init_machine(void)
struct device *parent = NULL;
int i;
+ platform_device_register(&db8500_prcmu_device);
snowball_pinmaps_init();
parent = u8500_init_devices(&ab8500_platdata);
@@ -710,6 +693,7 @@ static void __init hrefv60_init_machine(void)
int i2c0_devs;
int i;
+ platform_device_register(&db8500_prcmu_device);
/*
* The HREFv60 board removed a GPIO expander and routed
* all these GPIO pins to the internal GPIO controller
@@ -751,8 +735,7 @@ MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
.map_io = u8500_map_io,
.init_irq = ux500_init_irq,
/* we re-use nomadik timer here */
- .timer = &ux500_timer,
- .handle_irq = gic_handle_irq,
+ .init_time = ux500_timer_init,
.init_machine = mop500_init_machine,
.init_late = ux500_init_late,
MACHINE_END
@@ -761,8 +744,7 @@ MACHINE_START(U8520, "ST-Ericsson U8520 Platform HREFP520")
.atag_offset = 0x100,
.map_io = u8500_map_io,
.init_irq = ux500_init_irq,
- .timer = &ux500_timer,
- .handle_irq = gic_handle_irq,
+ .init_time = ux500_timer_init,
.init_machine = mop500_init_machine,
.init_late = ux500_init_late,
MACHINE_END
@@ -772,8 +754,7 @@ MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+")
.smp = smp_ops(ux500_smp_ops),
.map_io = u8500_map_io,
.init_irq = ux500_init_irq,
- .timer = &ux500_timer,
- .handle_irq = gic_handle_irq,
+ .init_time = ux500_timer_init,
.init_machine = hrefv60_init_machine,
.init_late = ux500_init_late,
MACHINE_END
@@ -784,8 +765,7 @@ MACHINE_START(SNOWBALL, "Calao Systems Snowball platform")
.map_io = u8500_map_io,
.init_irq = ux500_init_irq,
/* we re-use nomadik timer here */
- .timer = &ux500_timer,
- .handle_irq = gic_handle_irq,
+ .init_time = ux500_timer_init,
.init_machine = snowball_init_machine,
.init_late = NULL,
MACHINE_END
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.