diff options
Diffstat (limited to 'arch/arm/mach-ux500/include')
| -rw-r--r-- | arch/arm/mach-ux500/include/mach/db5500-regs.h | 143 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/include/mach/db8500-regs.h | 6 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/include/mach/debug-macro.S | 4 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/include/mach/devices.h | 1 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/include/mach/hardware.h | 4 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/include/mach/id.h | 17 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/include/mach/irqs-board-u5500.h | 21 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/include/mach/irqs-db5500.h | 113 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/include/mach/irqs.h | 7 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/include/mach/mbox-db5500.h | 88 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/include/mach/msp.h | 29 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/include/mach/setup.h | 6 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/include/mach/uncompress.h | 7 |
13 files changed, 57 insertions, 389 deletions
diff --git a/arch/arm/mach-ux500/include/mach/db5500-regs.h b/arch/arm/mach-ux500/include/mach/db5500-regs.h deleted file mode 100644 index 8e714bcb099f..000000000000 --- a/arch/arm/mach-ux500/include/mach/db5500-regs.h +++ /dev/null @@ -1,143 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * License terms: GNU General Public License (GPL) version 2 - */ - -#ifndef __MACH_DB5500_REGS_H -#define __MACH_DB5500_REGS_H - -#define U5500_PER1_BASE 0xA0020000 -#define U5500_PER2_BASE 0xA0010000 -#define U5500_PER3_BASE 0x80140000 -#define U5500_PER4_BASE 0x80150000 -#define U5500_PER5_BASE 0x80100000 -#define U5500_PER6_BASE 0x80120000 - -#define U5500_GIC_DIST_BASE 0xA0411000 -#define U5500_GIC_CPU_BASE 0xA0410100 -#define U5500_DMA_BASE 0x90030000 -#define U5500_STM_BASE 0x90020000 -#define U5500_STM_REG_BASE (U5500_STM_BASE + 0xF000) -#define U5500_MCDE_BASE 0xA0400000 -#define U5500_MODEM_BASE 0xB0000000 -#define U5500_L2CC_BASE 0xA0412000 -#define U5500_SCU_BASE 0xA0410000 -#define U5500_DSI1_BASE 0xA0401000 -#define U5500_DSI2_BASE 0xA0402000 -#define U5500_SIA_BASE 0xA0100000 -#define U5500_SVA_BASE 0x80200000 -#define U5500_HSEM_BASE 0xA0000000 -#define U5500_NAND0_BASE 0x60000000 -#define U5500_NAND1_BASE 0x70000000 -#define U5500_TWD_BASE 0xa0410600 -#define U5500_ICN_BASE 0xA0040000 -#define U5500_B2R2_BASE 0xa0200000 -#define U5500_BOOT_ROM_BASE 0x90000000 - -#define U5500_FSMC_BASE (U5500_PER1_BASE + 0x0000) -#define U5500_SDI0_BASE (U5500_PER1_BASE + 0x1000) -#define U5500_SDI2_BASE (U5500_PER1_BASE + 0x2000) -#define U5500_UART0_BASE (U5500_PER1_BASE + 0x3000) -#define U5500_I2C1_BASE (U5500_PER1_BASE + 0x4000) -#define U5500_MSP0_BASE (U5500_PER1_BASE + 0x5000) -#define U5500_GPIO0_BASE (U5500_PER1_BASE + 0xE000) -#define U5500_CLKRST1_BASE (U5500_PER1_BASE + 0xF000) - -#define U5500_USBOTG_BASE (U5500_PER2_BASE + 0x0000) -#define U5500_GPIO1_BASE (U5500_PER2_BASE + 0xE000) -#define U5500_CLKRST2_BASE (U5500_PER2_BASE + 0xF000) - -#define U5500_KEYPAD_BASE (U5500_PER3_BASE + 0x0000) -#define U5500_PWM_BASE (U5500_PER3_BASE + 0x1000) -#define U5500_GPIO3_BASE (U5500_PER3_BASE + 0xE000) -#define U5500_CLKRST3_BASE (U5500_PER3_BASE + 0xF000) - -#define U5500_BACKUPRAM0_BASE (U5500_PER4_BASE + 0x0000) -#define U5500_BACKUPRAM1_BASE (U5500_PER4_BASE + 0x1000) -#define U5500_RTT0_BASE (U5500_PER4_BASE + 0x2000) -#define U5500_RTT1_BASE (U5500_PER4_BASE + 0x3000) -#define U5500_RTC_BASE (U5500_PER4_BASE + 0x4000) -#define U5500_SCR_BASE (U5500_PER4_BASE + 0x5000) -#define U5500_DMC_BASE (U5500_PER4_BASE + 0x6000) -#define U5500_PRCMU_BASE (U5500_PER4_BASE + 0x7000) -#define U5500_PRCMU_TIMER_3_BASE (U5500_PER4_BASE + 0x07338) -#define U5500_PRCMU_TIMER_4_BASE (U5500_PER4_BASE + 0x07450) -#define U5500_MSP1_BASE (U5500_PER4_BASE + 0x9000) -#define U5500_GPIO2_BASE (U5500_PER4_BASE + 0xA000) -#define U5500_MTIMER_BASE (U5500_PER4_BASE + 0xC000) -#define U5500_CDETECT_BASE (U5500_PER4_BASE + 0xF000) -#define U5500_PRCMU_TCDM_BASE (U5500_PER4_BASE + 0x18000) -#define U5500_PRCMU_TCPM_BASE (U5500_PER4_BASE + 0x10000) -#define U5500_TPIU_BASE (U5500_PER4_BASE + 0x50000) - -#define U5500_SPI0_BASE (U5500_PER5_BASE + 0x0000) -#define U5500_SPI1_BASE (U5500_PER5_BASE + 0x1000) -#define U5500_SPI2_BASE (U5500_PER5_BASE + 0x2000) -#define U5500_SPI3_BASE (U5500_PER5_BASE + 0x3000) -#define U5500_UART1_BASE (U5500_PER5_BASE + 0x4000) -#define U5500_UART2_BASE (U5500_PER5_BASE + 0x5000) -#define U5500_UART3_BASE (U5500_PER5_BASE + 0x6000) -#define U5500_SDI1_BASE (U5500_PER5_BASE + 0x7000) -#define U5500_SDI3_BASE (U5500_PER5_BASE + 0x8000) -#define U5500_SDI4_BASE (U5500_PER5_BASE + 0x9000) -#define U5500_I2C2_BASE (U5500_PER5_BASE + 0xA000) -#define U5500_I2C3_BASE (U5500_PER5_BASE + 0xB000) -#define U5500_MSP2_BASE (U5500_PER5_BASE + 0xC000) -#define U5500_IRDA_BASE (U5500_PER5_BASE + 0xD000) -#define U5500_IRRC_BASE (U5500_PER5_BASE + 0x10000) -#define U5500_GPIO4_BASE (U5500_PER5_BASE + 0x1E000) -#define U5500_CLKRST5_BASE (U5500_PER5_BASE + 0x1F000) - -#define U5500_RNG_BASE (U5500_PER6_BASE + 0x0000) -#define U5500_HASH0_BASE (U5500_PER6_BASE + 0x1000) -#define U5500_HASH1_BASE (U5500_PER6_BASE + 0x2000) -#define U5500_PKA_BASE (U5500_PER6_BASE + 0x4000) -#define U5500_PKAM_BASE (U5500_PER6_BASE + 0x5100) -#define U5500_MTU0_BASE (U5500_PER6_BASE + 0x6000) -#define U5500_MTU1_BASE (U5500_PER6_BASE + 0x7000) -#define U5500_CR_BASE (U5500_PER6_BASE + 0x8000) -#define U5500_CRYP0_BASE (U5500_PER6_BASE + 0xA000) -#define U5500_CRYP1_BASE (U5500_PER6_BASE + 0xB000) -#define U5500_CLKRST6_BASE (U5500_PER6_BASE + 0xF000) - -#define U5500_GPIOBANK0_BASE U5500_GPIO0_BASE -#define U5500_GPIOBANK1_BASE (U5500_GPIO0_BASE + 0x80) -#define U5500_GPIOBANK2_BASE U5500_GPIO1_BASE -#define U5500_GPIOBANK3_BASE U5500_GPIO2_BASE -#define U5500_GPIOBANK4_BASE U5500_GPIO3_BASE -#define U5500_GPIOBANK5_BASE U5500_GPIO4_BASE -#define U5500_GPIOBANK6_BASE (U5500_GPIO4_BASE + 0x80) -#define U5500_GPIOBANK7_BASE (U5500_GPIO4_BASE + 0x100) - -#define U5500_MBOX_BASE (U5500_MODEM_BASE + 0xFFD1000) -#define U5500_MBOX0_PEER_START (U5500_MBOX_BASE + 0x40) -#define U5500_MBOX0_PEER_END (U5500_MBOX_BASE + 0x5F) -#define U5500_MBOX0_LOCAL_START (U5500_MBOX_BASE + 0x60) -#define U5500_MBOX0_LOCAL_END (U5500_MBOX_BASE + 0x7F) -#define U5500_MBOX1_PEER_START (U5500_MBOX_BASE + 0x80) -#define U5500_MBOX1_PEER_END (U5500_MBOX_BASE + 0x9F) -#define U5500_MBOX1_LOCAL_START (U5500_MBOX_BASE + 0xA0) -#define U5500_MBOX1_LOCAL_END (U5500_MBOX_BASE + 0xBF) -#define U5500_MBOX2_PEER_START (U5500_MBOX_BASE + 0x00) -#define U5500_MBOX2_PEER_END (U5500_MBOX_BASE + 0x1F) -#define U5500_MBOX2_LOCAL_START (U5500_MBOX_BASE + 0x20) -#define U5500_MBOX2_LOCAL_END (U5500_MBOX_BASE + 0x3F) - -#define U5500_ACCCON_BASE_SEC (0xBFFF0000) -#define U5500_ACCCON_BASE (0xBFFF1000) -#define U5500_ACCCON_CPUVEC_RESET_ADDR_OFFSET (0x00000020) -#define U5500_ACCCON_ACC_CPU_CTRL_OFFSET (0x000000BC) -#define U5500_INTCON_MBOX1_INT_RESET_ADDR (0xBFFD31A4) - -#define U5500_ESRAM_BASE 0x40000000 -#define U5500_ESRAM_DMA_LCPA_OFFSET 0x10000 -#define U5500_DMA_LCPA_BASE (U5500_ESRAM_BASE + U5500_ESRAM_DMA_LCPA_OFFSET) - -#define U5500_MCDE_SIZE 0x1000 -#define U5500_DSI_LINK_SIZE 0x1000 -#define U5500_DSI_LINK_COUNT 0x2 -#define U5500_DSI_LINK1_BASE (U5500_MCDE_BASE + U5500_MCDE_SIZE) -#define U5500_DSI_LINK2_BASE (U5500_DSI_LINK1_BASE + U5500_DSI_LINK_SIZE) - -#endif diff --git a/arch/arm/mach-ux500/include/mach/db8500-regs.h b/arch/arm/mach-ux500/include/mach/db8500-regs.h index 9ec20b96d8f2..1530d493879d 100644 --- a/arch/arm/mach-ux500/include/mach/db8500-regs.h +++ b/arch/arm/mach-ux500/include/mach/db8500-regs.h @@ -41,6 +41,10 @@ /* ASIC ID is at 0xbf4 offset within this region */ #define U8500_ASIC_ID_BASE 0x9001D000 +#define U9540_BOOT_ROM_BASE 0xFFFE0000 +/* ASIC ID is at 0xbf4 offset within this region */ +#define U9540_ASIC_ID_BASE 0xFFFFD000 + #define U8500_PER6_BASE 0xa03c0000 #define U8500_PER7_BASE 0xa03d0000 #define U8500_PER5_BASE 0xa03e0000 @@ -96,7 +100,9 @@ #define U8500_SCR_BASE (U8500_PER4_BASE + 0x05000) #define U8500_DMC_BASE (U8500_PER4_BASE + 0x06000) #define U8500_PRCMU_BASE (U8500_PER4_BASE + 0x07000) +#define U9540_DMC1_BASE (U8500_PER4_BASE + 0x0A000) #define U8500_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x68000) +#define U9540_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x6A000) #define U8500_PRCMU_TCPM_BASE (U8500_PER4_BASE + 0x60000) #define U8500_PRCMU_TIMER_3_BASE (U8500_PER4_BASE + 0x07338) #define U8500_PRCMU_TIMER_4_BASE (U8500_PER4_BASE + 0x07450) diff --git a/arch/arm/mach-ux500/include/mach/debug-macro.S b/arch/arm/mach-ux500/include/mach/debug-macro.S index 8d74d927d4e2..67035223334a 100644 --- a/arch/arm/mach-ux500/include/mach/debug-macro.S +++ b/arch/arm/mach-ux500/include/mach/debug-macro.S @@ -20,10 +20,6 @@ * built, so that there's some hint during the build that something is wrong. */ -#ifdef CONFIG_UX500_SOC_DB5500 -#define __UX500_UART(n) U5500_UART##n##_BASE -#endif - #ifdef CONFIG_UX500_SOC_DB8500 #define __UX500_UART(n) U8500_UART##n##_BASE #endif diff --git a/arch/arm/mach-ux500/include/mach/devices.h b/arch/arm/mach-ux500/include/mach/devices.h index 5f6cb71fc62d..9b5eb69a0154 100644 --- a/arch/arm/mach-ux500/include/mach/devices.h +++ b/arch/arm/mach-ux500/include/mach/devices.h @@ -10,7 +10,6 @@ struct platform_device; struct amba_device; -extern struct platform_device u5500_gpio_devs[]; extern struct platform_device u8500_gpio_devs[]; extern struct amba_device ux500_pl031_device; diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h index f84698936d36..808c1d6601c5 100644 --- a/arch/arm/mach-ux500/include/mach/hardware.h +++ b/arch/arm/mach-ux500/include/mach/hardware.h @@ -17,6 +17,8 @@ */ #define U8500_IO_VIRTUAL 0xf0000000 #define U8500_IO_PHYSICAL 0xa0000000 +/* This is where we map in the ROM to check ASIC IDs */ +#define UX500_VIRT_ROM 0xf0000000 /* This macro is used in assembly, so no cast */ #define IO_ADDRESS(x) \ @@ -24,11 +26,11 @@ /* typesafe io address */ #define __io_address(n) IOMEM(IO_ADDRESS(n)) + /* Used by some plat-nomadik code */ #define io_p2v(n) __io_address(n) #include <mach/db8500-regs.h> -#include <mach/db5500-regs.h> #define MSP_TX_RX_REG_OFFSET 0 diff --git a/arch/arm/mach-ux500/include/mach/id.h b/arch/arm/mach-ux500/include/mach/id.h index 833d6a6edc9b..c6e2db9e9e51 100644 --- a/arch/arm/mach-ux500/include/mach/id.h +++ b/arch/arm/mach-ux500/include/mach/id.h @@ -41,6 +41,16 @@ static inline bool __attribute_const__ cpu_is_u8500(void) return dbx500_partnumber() == 0x8500; } +static inline bool __attribute_const__ cpu_is_u9540(void) +{ + return dbx500_partnumber() == 0x9540; +} + +static inline bool cpu_is_u8500_family(void) +{ + return cpu_is_u8500() || cpu_is_u9540(); +} + static inline bool __attribute_const__ cpu_is_u5500(void) { return dbx500_partnumber() == 0x5500; @@ -111,7 +121,12 @@ static inline bool cpu_is_u8500v21(void) static inline bool cpu_is_u8500v20_or_later(void) { - return cpu_is_u8500() && !cpu_is_u8500v10() && !cpu_is_u8500v11(); + /* + * U9540 has so much in common with U8500 that is is considered a + * U8500 variant. + */ + return cpu_is_u9540() || + (cpu_is_u8500() && !cpu_is_u8500v10() && !cpu_is_u8500v11()); } static inline bool ux500_is_svp(void) diff --git a/arch/arm/mach-ux500/include/mach/irqs-board-u5500.h b/arch/arm/mach-ux500/include/mach/irqs-board-u5500.h deleted file mode 100644 index 29d972c7717b..000000000000 --- a/arch/arm/mach-ux500/include/mach/irqs-board-u5500.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * License terms: GNU General Public License (GPL) version 2 - */ - -#ifndef __MACH_IRQS_BOARD_U5500_H -#define __MACH_IRQS_BOARD_U5500_H - -#define AB5500_NR_IRQS 5 -#define IRQ_AB5500_BASE IRQ_BOARD_START -#define IRQ_AB5500_END (IRQ_AB5500_BASE + AB5500_NR_IRQS) - -#define U5500_IRQ_END IRQ_AB5500_END - -#if IRQ_BOARD_END < U5500_IRQ_END -#undef IRQ_BOARD_END -#define IRQ_BOARD_END U5500_IRQ_END -#endif - -#endif diff --git a/arch/arm/mach-ux500/include/mach/irqs-db5500.h b/arch/arm/mach-ux500/include/mach/irqs-db5500.h deleted file mode 100644 index 77239776a6f2..000000000000 --- a/arch/arm/mach-ux500/include/mach/irqs-db5500.h +++ /dev/null @@ -1,113 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Rabin Vincent <rabin.vincent@stericsson.com> - * License terms: GNU General Public License (GPL) version 2 - */ - -#ifndef __MACH_IRQS_DB5500_H -#define __MACH_IRQS_DB5500_H - -#define IRQ_DB5500_MTU0 (IRQ_SHPI_START + 4) -#define IRQ_DB5500_SPI2 (IRQ_SHPI_START + 6) -#define IRQ_DB5500_PMU0 (IRQ_SHPI_START + 7) -#define IRQ_DB5500_SPI0 (IRQ_SHPI_START + 8) -#define IRQ_DB5500_RTT (IRQ_SHPI_START + 9) -#define IRQ_DB5500_PKA (IRQ_SHPI_START + 10) -#define IRQ_DB5500_UART0 (IRQ_SHPI_START + 11) -#define IRQ_DB5500_I2C3 (IRQ_SHPI_START + 12) -#define IRQ_DB5500_L2CC (IRQ_SHPI_START + 13) -#define IRQ_DB5500_MSP0 (IRQ_SHPI_START + 14) -#define IRQ_DB5500_CRYP1 (IRQ_SHPI_START + 15) -#define IRQ_DB5500_PMU1 (IRQ_SHPI_START + 16) -#define IRQ_DB5500_MTU1 (IRQ_SHPI_START + 17) -#define IRQ_DB5500_RTC (IRQ_SHPI_START + 18) -#define IRQ_DB5500_UART1 (IRQ_SHPI_START + 19) -#define IRQ_DB5500_USB_WAKEUP (IRQ_SHPI_START + 20) -#define IRQ_DB5500_I2C0 (IRQ_SHPI_START + 21) -#define IRQ_DB5500_I2C1 (IRQ_SHPI_START + 22) -#define IRQ_DB5500_USBOTG (IRQ_SHPI_START + 23) -#define IRQ_DB5500_DMA_SECURE (IRQ_SHPI_START + 24) -#define IRQ_DB5500_DMA (IRQ_SHPI_START + 25) -#define IRQ_DB5500_UART2 (IRQ_SHPI_START + 26) -#define IRQ_DB5500_ICN_PMU1 (IRQ_SHPI_START + 27) -#define IRQ_DB5500_ICN_PMU2 (IRQ_SHPI_START + 28) -#define IRQ_DB5500_UART3 (IRQ_SHPI_START + 29) -#define IRQ_DB5500_SPI3 (IRQ_SHPI_START + 30) -#define IRQ_DB5500_SDMMC4 (IRQ_SHPI_START + 31) -#define IRQ_DB5500_IRRC (IRQ_SHPI_START + 33) -#define IRQ_DB5500_IRDA_FT (IRQ_SHPI_START + 34) -#define IRQ_DB5500_IRDA_SD (IRQ_SHPI_START + 35) -#define IRQ_DB5500_IRDA_FI (IRQ_SHPI_START + 36) -#define IRQ_DB5500_IRDA_FD (IRQ_SHPI_START + 37) -#define IRQ_DB5500_FSMC_CODEREADY (IRQ_SHPI_START + 38) -#define IRQ_DB5500_FSMC_NANDWAIT (IRQ_SHPI_START + 39) -#define IRQ_DB5500_AB5500 (IRQ_SHPI_START + 40) -#define IRQ_DB5500_SDMMC2 (IRQ_SHPI_START + 41) -#define IRQ_DB5500_SIA (IRQ_SHPI_START + 42) -#define IRQ_DB5500_SIA2 (IRQ_SHPI_START + 43) -#define IRQ_DB5500_HVA (IRQ_SHPI_START + 44) -#define IRQ_DB5500_HVA2 (IRQ_SHPI_START + 45) -#define IRQ_DB5500_PRCMU0 (IRQ_SHPI_START + 46) -#define IRQ_DB5500_PRCMU1 (IRQ_SHPI_START + 47) -#define IRQ_DB5500_DISP (IRQ_SHPI_START + 48) -#define IRQ_DB5500_SDMMC1 (IRQ_SHPI_START + 50) -#define IRQ_DB5500_MSP1 (IRQ_SHPI_START + 52) -#define IRQ_DB5500_KBD (IRQ_SHPI_START + 53) -#define IRQ_DB5500_I2C2 (IRQ_SHPI_START + 55) -#define IRQ_DB5500_B2R2 (IRQ_SHPI_START + 56) -#define IRQ_DB5500_CRYP0 (IRQ_SHPI_START + 57) -#define IRQ_DB5500_SDMMC3 (IRQ_SHPI_START + 59) -#define IRQ_DB5500_SDMMC0 (IRQ_SHPI_START + 60) -#define IRQ_DB5500_HSEM (IRQ_SHPI_START + 61) -#define IRQ_DB5500_SBAG (IRQ_SHPI_START + 63) -#define IRQ_DB5500_MODEM (IRQ_SHPI_START + 65) -#define IRQ_DB5500_SPI1 (IRQ_SHPI_START + 96) -#define IRQ_DB5500_MSP2 (IRQ_SHPI_START + 98) -#define IRQ_DB5500_SRPTIMER (IRQ_SHPI_START + 101) -#define IRQ_DB5500_CTI0 (IRQ_SHPI_START + 108) -#define IRQ_DB5500_CTI1 (IRQ_SHPI_START + 109) -#define IRQ_DB5500_ICN_ERR (IRQ_SHPI_START + 110) -#define IRQ_DB5500_MALI_PPMMU (IRQ_SHPI_START + 112) -#define IRQ_DB5500_MALI_PP (IRQ_SHPI_START + 113) -#define IRQ_DB5500_MALI_GPMMU (IRQ_SHPI_START + 114) -#define IRQ_DB5500_MALI_GP (IRQ_SHPI_START + 115) -#define IRQ_DB5500_MALI (IRQ_SHPI_START + 116) -#define IRQ_DB5500_PRCMU_SEM (IRQ_SHPI_START + 118) -#define IRQ_DB5500_GPIO0 (IRQ_SHPI_START + 119) -#define IRQ_DB5500_GPIO1 (IRQ_SHPI_START + 120) -#define IRQ_DB5500_GPIO2 (IRQ_SHPI_START + 121) -#define IRQ_DB5500_GPIO3 (IRQ_SHPI_START + 122) -#define IRQ_DB5500_GPIO4 (IRQ_SHPI_START + 123) -#define IRQ_DB5500_GPIO5 (IRQ_SHPI_START + 124) -#define IRQ_DB5500_GPIO6 (IRQ_SHPI_START + 125) -#define IRQ_DB5500_GPIO7 (IRQ_SHPI_START + 126) - -#ifdef CONFIG_UX500_SOC_DB5500 - -/* - * After the GPIO ones we reserve a range of IRQ:s in which virtual - * IRQ:s representing modem IRQ:s can be allocated - */ -#define IRQ_MODEM_EVENTS_BASE IRQ_SOC_START -#define IRQ_MODEM_EVENTS_NBR 72 -#define IRQ_MODEM_EVENTS_END (IRQ_MODEM_EVENTS_BASE + IRQ_MODEM_EVENTS_NBR) - -/* List of virtual IRQ:s that are allocated from the range above */ -#define MBOX_PAIR0_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 43) -#define MBOX_PAIR1_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 45) -#define MBOX_PAIR2_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 41) - -/* - * We may have several SoCs, but only one will run at a - * time, so the one with most IRQs will bump this ahead, - * but the IRQ_SOC_START remains the same for either SoC. - */ -#if IRQ_SOC_END < IRQ_MODEM_EVENTS_END -#undef IRQ_SOC_END -#define IRQ_SOC_END IRQ_MODEM_EVENTS_END -#endif - -#endif /* CONFIG_UX500_SOC_DB5500 */ - -#endif diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h index c23a6b5f0c4e..e8928548b6a3 100644 --- a/arch/arm/mach-ux500/include/mach/irqs.h +++ b/arch/arm/mach-ux500/include/mach/irqs.h @@ -24,7 +24,7 @@ */ #define IRQ_MTU0 (IRQ_SHPI_START + 4) -#define DBX500_NR_INTERNAL_IRQS 160 +#define DBX500_NR_INTERNAL_IRQS 166 /* After chip-specific IRQ numbers we have the GPIO ones */ #define NOMADIK_NR_GPIO 288 @@ -36,7 +36,6 @@ /* This will be overridden by SoC-specific irq headers */ #define IRQ_SOC_END IRQ_SOC_START -#include <mach/irqs-db5500.h> #include <mach/irqs-db8500.h> #define IRQ_BOARD_START IRQ_SOC_END @@ -47,10 +46,6 @@ #include <mach/irqs-board-mop500.h> #endif -#ifdef CONFIG_MACH_U5500 -#include <mach/irqs-board-u5500.h> -#endif - #define NR_IRQS IRQ_BOARD_END #endif /* ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-ux500/include/mach/mbox-db5500.h b/arch/arm/mach-ux500/include/mach/mbox-db5500.h deleted file mode 100644 index 7f9da4d2fbda..000000000000 --- a/arch/arm/mach-ux500/include/mach/mbox-db5500.h +++ /dev/null @@ -1,88 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * Author: Stefan Nilsson <stefan.xk.nilsson@stericsson.com> for ST-Ericsson. - * Author: Martin Persson <martin.persson@stericsson.com> for ST-Ericsson. - * License terms: GNU General Public License (GPL), version 2. - */ - -#ifndef __INC_STE_MBOX_H -#define __INC_STE_MBOX_H - -#define MBOX_BUF_SIZE 16 -#define MBOX_NAME_SIZE 8 - -/** - * mbox_recv_cb_t - Definition of the mailbox callback. - * @mbox_msg: The mailbox message. - * @priv: The clients private data as specified in the call to mbox_setup. - * - * This function will be called upon reception of new mailbox messages. - */ -typedef void mbox_recv_cb_t (u32 mbox_msg, void *priv); - -/** - * struct mbox - Mailbox instance struct - * @list: Linked list head. - * @pdev: Pointer to device struct. - * @cb: Callback function. Will be called - * when new data is received. - * @client_data: Clients private data. Will be sent back - * in the callback function. - * @virtbase_peer: Virtual address for outgoing mailbox. - * @virtbase_local: Virtual address for incoming mailbox. - * @buffer: Then internal queue for outgoing messages. - * @name: Name of this mailbox. - * @buffer_available: Completion variable to achieve "blocking send". - * This variable will be signaled when there is - * internal buffer space available. - * @client_blocked: To keep track if any client is currently - * blocked. - * @lock: Spinlock to protect this mailbox instance. - * @write_index: Index in internal buffer to write to. - * @read_index: Index in internal buffer to read from. - * @allocated: Indicates whether this particular mailbox - * id has been allocated by someone. - */ -struct mbox { - struct list_head list; - struct platform_device *pdev; - mbox_recv_cb_t *cb; - void *client_data; - void __iomem *virtbase_peer; - void __iomem *virtbase_local; - u32 buffer[MBOX_BUF_SIZE]; - char name[MBOX_NAME_SIZE]; - struct completion buffer_available; - u8 client_blocked; - spinlock_t lock; - u8 write_index; - u8 read_index; - bool allocated; -}; - -/** - * mbox_setup - Set up a mailbox and return its instance. - * @mbox_id: The ID number of the mailbox. 0 or 1 for modem CPU, - * 2 for modem DSP. - * @mbox_cb: Pointer to the callback function to be called when a new message - * is received. - * @priv: Client user data which will be returned in the callback. - * - * Returns a mailbox instance to be specified in subsequent calls to mbox_send. - */ -struct mbox *mbox_setup(u8 mbox_id, mbox_recv_cb_t *mbox_cb, void *priv); - -/** - * mbox_send - Send a mailbox message. - * @mbox: Mailbox instance (returned by mbox_setup) - * @mbox_msg: The mailbox message to send. - * @block: Specifies whether this call will block until send is possible, - * or return an error if the mailbox buffer is full. - * - * Returns 0 on success or a negative error code on error. -ENOMEM indicates - * that the internal buffer is full and you have to try again later (or - * specify "block" in order to block until send is possible). - */ -int mbox_send(struct mbox *mbox, u32 mbox_msg, bool block); - -#endif /*INC_STE_MBOX_H*/ diff --git a/arch/arm/mach-ux500/include/mach/msp.h b/arch/arm/mach-ux500/include/mach/msp.h new file mode 100644 index 000000000000..798be19129ef --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/msp.h @@ -0,0 +1,29 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson + * License terms: GNU General Public License (GPL), version 2. + */ + +#ifndef __MSP_H +#define __MSP_H + +#include <plat/ste_dma40.h> + +enum msp_i2s_id { + MSP_I2S_0 = 0, + MSP_I2S_1, + MSP_I2S_2, + MSP_I2S_3, +}; + +/* Platform data structure for a MSP I2S-device */ +struct msp_i2s_platform_data { + enum msp_i2s_id id; + struct stedma40_chan_cfg *msp_i2s_dma_rx; + struct stedma40_chan_cfg *msp_i2s_dma_tx; + int (*msp_i2s_init) (void); + int (*msp_i2s_exit) (void); +}; + +#endif diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h index 3dc00ffa7bfa..4e369f1645ec 100644 --- a/arch/arm/mach-ux500/include/mach/setup.h +++ b/arch/arm/mach-ux500/include/mach/setup.h @@ -15,18 +15,12 @@ #include <linux/init.h> void __init ux500_map_io(void); -extern void __init u5500_map_io(void); extern void __init u8500_map_io(void); -extern struct device * __init u5500_init_devices(void); extern struct device * __init u8500_init_devices(void); extern void __init ux500_init_irq(void); -extern void __init u5500_sdi_init(struct device *parent); - -extern void __init db5500_dma_init(struct device *parent); - extern struct device *ux500_soc_device_init(const char *soc_id); struct amba_device; diff --git a/arch/arm/mach-ux500/include/mach/uncompress.h b/arch/arm/mach-ux500/include/mach/uncompress.h index 6fb3c4b0105d..34775baadaea 100644 --- a/arch/arm/mach-ux500/include/mach/uncompress.h +++ b/arch/arm/mach-ux500/include/mach/uncompress.h @@ -50,11 +50,8 @@ static void flush(void) static inline void arch_decomp_setup(void) { - /* Check in run time if we run on an U8500 or U5500 */ - if (machine_is_u5500()) - ux500_uart_base = U5500_UART0_BASE; - else - ux500_uart_base = U8500_UART2_BASE; + /* Use machine_is_foo() macro if you need to switch base someday */ + ux500_uart_base = U8500_UART2_BASE; } #define arch_decomp_wdog() /* nothing to do here */ |