diff options
Diffstat (limited to '')
| -rw-r--r-- | arch/arm/mm/proc-arm1020e.S | 51 |
1 files changed, 22 insertions, 29 deletions
diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S index be6d081ff2b7..89b1d6d3d7c0 100644 --- a/arch/arm/mm/proc-arm1020e.S +++ b/arch/arm/mm/proc-arm1020e.S @@ -3,6 +3,7 @@ * * Copyright (C) 2000 ARM Limited * Copyright (C) 2000 Deep Blue Solutions Ltd. + * hacked for non-paged-MM by Hyok S. Choi, 2003. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -25,7 +26,6 @@ * CONFIG_CPU_ARM1020_CPU_IDLE -> nohlt */ #include <linux/linkage.h> -#include <linux/config.h> #include <linux/init.h> #include <asm/assembler.h> #include <asm/asm-offsets.h> @@ -34,6 +34,8 @@ #include <asm/procinfo.h> #include <asm/ptrace.h> +#include "proc-macros.S" + /* * This is the maximum size of an area which will be invalidated * using the single invalidate entry instructions. Anything larger @@ -101,7 +103,9 @@ ENTRY(cpu_arm1020e_reset) mov ip, #0 mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches mcr p15, 0, ip, c7, c10, 4 @ drain WB +#ifdef CONFIG_MMU mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs +#endif mrc p15, 0, ip, c1, c0, 0 @ ctrl register bic ip, ip, #0x000f @ ............wcam bic ip, ip, #0x1100 @ ...i...s........ @@ -344,6 +348,7 @@ ENTRY(cpu_arm1020e_dcache_clean_area) */ .align 5 ENTRY(cpu_arm1020e_switch_mm) +#ifdef CONFIG_MMU #ifndef CONFIG_CPU_DCACHE_DISABLE mcr p15, 0, r3, c7, c10, 4 mov r1, #0xF @ 16 segments @@ -367,6 +372,7 @@ ENTRY(cpu_arm1020e_switch_mm) mcr p15, 0, r1, c7, c10, 4 @ drain WB mcr p15, 0, r0, c2, c0, 0 @ load page table pointer mcr p15, 0, r1, c8, c7, 0 @ invalidate I & D TLBs +#endif mov pc, lr /* @@ -376,6 +382,7 @@ ENTRY(cpu_arm1020e_switch_mm) */ .align 5 ENTRY(cpu_arm1020e_set_pte) +#ifdef CONFIG_MMU str r1, [r0], #-2048 @ linux version eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY @@ -403,6 +410,7 @@ ENTRY(cpu_arm1020e_set_pte) #ifndef CONFIG_CPU_DCACHE_DISABLE mcr p15, 0, r0, c7, c10, 1 @ clean D entry #endif +#endif /* CONFIG_MMU */ mov pc, lr __INIT @@ -412,12 +420,14 @@ __arm1020e_setup: mov r0, #0 mcr p15, 0, r0, c7, c7 @ invalidate I,D caches on v4 mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4 +#ifdef CONFIG_MMU mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4 +#endif + adr r5, arm1020e_crval + ldmia r5, {r5, r6} mrc p15, 0, r0, c1, c0 @ get control register v4 - ldr r5, arm1020e_cr1_clear bic r0, r0, r5 - ldr r5, arm1020e_cr1_set - orr r0, r0, r5 + orr r0, r0, r6 #ifdef CONFIG_CPU_CACHE_ROUND_ROBIN orr r0, r0, #0x4000 @ .R.. .... .... .... #endif @@ -429,12 +439,9 @@ __arm1020e_setup: * .RVI ZFRS BLDP WCAM * .011 1001 ..11 0101 */ - .type arm1020e_cr1_clear, #object - .type arm1020e_cr1_set, #object -arm1020e_cr1_clear: - .word 0x5f3f -arm1020e_cr1_set: - .word 0x3935 + .type arm1020e_crval, #object +arm1020e_crval: + crval clear=0x00007f3f, mmuset=0x00003935, ucset=0x00001930 __INITDATA @@ -468,25 +475,7 @@ cpu_elf_name: .type cpu_arm1020e_name, #object cpu_arm1020e_name: - .ascii "ARM1020E" -#ifndef CONFIG_CPU_ICACHE_DISABLE - .ascii "i" -#endif -#ifndef CONFIG_CPU_DCACHE_DISABLE - .ascii "d" -#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH - .ascii "(wt)" -#else - .ascii "(wb)" -#endif -#endif -#ifndef CONFIG_CPU_BPREDICT_DISABLE - .ascii "B" -#endif -#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN - .ascii "RR" -#endif - .ascii "\0" + .asciz "ARM1020E" .size cpu_arm1020e_name, . - cpu_arm1020e_name .align @@ -501,6 +490,10 @@ __arm1020e_proc_info: PMD_BIT4 | \ PMD_SECT_AP_WRITE | \ PMD_SECT_AP_READ + .long PMD_TYPE_SECT | \ + PMD_BIT4 | \ + PMD_SECT_AP_WRITE | \ + PMD_SECT_AP_READ b __arm1020e_setup .long cpu_arch_name .long cpu_elf_name |