diff options
Diffstat (limited to 'arch/arm/plat-nomadik')
| -rw-r--r-- | arch/arm/plat-nomadik/Kconfig | 29 | ||||
| -rw-r--r-- | arch/arm/plat-nomadik/Makefile | 5 | ||||
| -rw-r--r-- | arch/arm/plat-nomadik/include/plat/gpio-nomadik.h | 102 | ||||
| -rw-r--r-- | arch/arm/plat-nomadik/include/plat/mtu.h | 9 | ||||
| -rw-r--r-- | arch/arm/plat-nomadik/include/plat/pincfg.h | 173 | ||||
| -rw-r--r-- | arch/arm/plat-nomadik/include/plat/ste_dma40.h | 223 | ||||
| -rw-r--r-- | arch/arm/plat-nomadik/timer.c | 223 |
7 files changed, 0 insertions, 764 deletions
diff --git a/arch/arm/plat-nomadik/Kconfig b/arch/arm/plat-nomadik/Kconfig deleted file mode 100644 index 19f55cae5d73..000000000000 --- a/arch/arm/plat-nomadik/Kconfig +++ /dev/null @@ -1,29 +0,0 @@ -# We keep common IP's here for Nomadik and other similar -# familiy of processors from ST-Ericsson. At the moment we have -# just MTU, others to follow soon. - -config PLAT_NOMADIK - bool - depends on ARCH_NOMADIK || ARCH_U8500 - default y - select CLKSRC_MMIO - help - Common platform code for Nomadik and other ST-Ericsson - platforms. - -if PLAT_NOMADIK - -config HAS_MTU - bool - help - Support for Multi Timer Unit. MTU provides access - to multiple interrupt generating programmable - 32-bit free running decrementing counters. - -config NOMADIK_MTU_SCHED_CLOCK - bool - depends on HAS_MTU - help - Use the Multi Timer Unit as the sched_clock. - -endif diff --git a/arch/arm/plat-nomadik/Makefile b/arch/arm/plat-nomadik/Makefile deleted file mode 100644 index 37c7cdd0f8f0..000000000000 --- a/arch/arm/plat-nomadik/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# arch/arm/plat-nomadik/Makefile -# Copyright 2009 ST-Ericsson -# Licensed under GPLv2 - -obj-$(CONFIG_HAS_MTU) += timer.o diff --git a/arch/arm/plat-nomadik/include/plat/gpio-nomadik.h b/arch/arm/plat-nomadik/include/plat/gpio-nomadik.h deleted file mode 100644 index c08a54d9d889..000000000000 --- a/arch/arm/plat-nomadik/include/plat/gpio-nomadik.h +++ /dev/null @@ -1,102 +0,0 @@ -/* - * Structures and registers for GPIO access in the Nomadik SoC - * - * Copyright (C) 2008 STMicroelectronics - * Author: Prafulla WADASKAR <prafulla.wadaskar@st.com> - * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __PLAT_NOMADIK_GPIO -#define __PLAT_NOMADIK_GPIO - -/* - * "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving - * the "gpio" namespace for generic and cross-machine functions - */ - -/* Register in the logic block */ -#define NMK_GPIO_DAT 0x00 -#define NMK_GPIO_DATS 0x04 -#define NMK_GPIO_DATC 0x08 -#define NMK_GPIO_PDIS 0x0c -#define NMK_GPIO_DIR 0x10 -#define NMK_GPIO_DIRS 0x14 -#define NMK_GPIO_DIRC 0x18 -#define NMK_GPIO_SLPC 0x1c -#define NMK_GPIO_AFSLA 0x20 -#define NMK_GPIO_AFSLB 0x24 -#define NMK_GPIO_LOWEMI 0x28 - -#define NMK_GPIO_RIMSC 0x40 -#define NMK_GPIO_FIMSC 0x44 -#define NMK_GPIO_IS 0x48 -#define NMK_GPIO_IC 0x4c -#define NMK_GPIO_RWIMSC 0x50 -#define NMK_GPIO_FWIMSC 0x54 -#define NMK_GPIO_WKS 0x58 - -/* Alternate functions: function C is set in hw by setting both A and B */ -#define NMK_GPIO_ALT_GPIO 0 -#define NMK_GPIO_ALT_A 1 -#define NMK_GPIO_ALT_B 2 -#define NMK_GPIO_ALT_C (NMK_GPIO_ALT_A | NMK_GPIO_ALT_B) - -#define NMK_GPIO_ALT_CX_SHIFT 2 -#define NMK_GPIO_ALT_C1 ((1<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C) -#define NMK_GPIO_ALT_C2 ((2<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C) -#define NMK_GPIO_ALT_C3 ((3<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C) -#define NMK_GPIO_ALT_C4 ((4<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C) - -/* Pull up/down values */ -enum nmk_gpio_pull { - NMK_GPIO_PULL_NONE, - NMK_GPIO_PULL_UP, - NMK_GPIO_PULL_DOWN, -}; - -/* Sleep mode */ -enum nmk_gpio_slpm { - NMK_GPIO_SLPM_INPUT, - NMK_GPIO_SLPM_WAKEUP_ENABLE = NMK_GPIO_SLPM_INPUT, - NMK_GPIO_SLPM_NOCHANGE, - NMK_GPIO_SLPM_WAKEUP_DISABLE = NMK_GPIO_SLPM_NOCHANGE, -}; - -extern int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode); -extern int nmk_gpio_set_pull(int gpio, enum nmk_gpio_pull pull); -#ifdef CONFIG_PINCTRL_NOMADIK -extern int nmk_gpio_set_mode(int gpio, int gpio_mode); -#else -static inline int nmk_gpio_set_mode(int gpio, int gpio_mode) -{ - return -ENODEV; -} -#endif -extern int nmk_gpio_get_mode(int gpio); - -extern void nmk_gpio_wakeups_suspend(void); -extern void nmk_gpio_wakeups_resume(void); - -extern void nmk_gpio_clocks_enable(void); -extern void nmk_gpio_clocks_disable(void); - -extern void nmk_gpio_read_pull(int gpio_bank, u32 *pull_up); - -/* - * Platform data to register a block: only the initial gpio/irq number. - */ -struct nmk_gpio_platform_data { - char *name; - int first_gpio; - int first_irq; - int num_gpio; - u32 (*get_secondary_status)(unsigned int bank); - void (*set_ioforce)(bool enable); - bool supports_sleepmode; -}; - -#endif /* __PLAT_NOMADIK_GPIO */ diff --git a/arch/arm/plat-nomadik/include/plat/mtu.h b/arch/arm/plat-nomadik/include/plat/mtu.h deleted file mode 100644 index 582641f3dc01..000000000000 --- a/arch/arm/plat-nomadik/include/plat/mtu.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef __PLAT_MTU_H -#define __PLAT_MTU_H - -void nmdk_timer_init(void __iomem *base); -void nmdk_clkevt_reset(void); -void nmdk_clksrc_reset(void); - -#endif /* __PLAT_MTU_H */ - diff --git a/arch/arm/plat-nomadik/include/plat/pincfg.h b/arch/arm/plat-nomadik/include/plat/pincfg.h deleted file mode 100644 index 3b8ec60af351..000000000000 --- a/arch/arm/plat-nomadik/include/plat/pincfg.h +++ /dev/null @@ -1,173 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * License terms: GNU General Public License, version 2 - * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson - * - * Based on arch/arm/mach-pxa/include/mach/mfp.h: - * Copyright (C) 2007 Marvell International Ltd. - * eric miao <eric.miao@marvell.com> - */ - -#ifndef __PLAT_PINCFG_H -#define __PLAT_PINCFG_H - -/* - * pin configurations are represented by 32-bit integers: - * - * bit 0.. 8 - Pin Number (512 Pins Maximum) - * bit 9..10 - Alternate Function Selection - * bit 11..12 - Pull up/down state - * bit 13 - Sleep mode behaviour - * bit 14 - Direction - * bit 15 - Value (if output) - * bit 16..18 - SLPM pull up/down state - * bit 19..20 - SLPM direction - * bit 21..22 - SLPM Value (if output) - * bit 23..25 - PDIS value (if input) - * bit 26 - Gpio mode - * bit 27 - Sleep mode - * - * to facilitate the definition, the following macros are provided - * - * PIN_CFG_DEFAULT - default config (0): - * pull up/down = disabled - * sleep mode = input/wakeup - * direction = input - * value = low - * SLPM direction = same as normal - * SLPM pull = same as normal - * SLPM value = same as normal - * - * PIN_CFG - default config with alternate function - */ - -typedef unsigned long pin_cfg_t; - -#define PIN_NUM_MASK 0x1ff -#define PIN_NUM(x) ((x) & PIN_NUM_MASK) - -#define PIN_ALT_SHIFT 9 -#define PIN_ALT_MASK (0x3 << PIN_ALT_SHIFT) -#define PIN_ALT(x) (((x) & PIN_ALT_MASK) >> PIN_ALT_SHIFT) -#define PIN_GPIO (NMK_GPIO_ALT_GPIO << PIN_ALT_SHIFT) -#define PIN_ALT_A (NMK_GPIO_ALT_A << PIN_ALT_SHIFT) -#define PIN_ALT_B (NMK_GPIO_ALT_B << PIN_ALT_SHIFT) -#define PIN_ALT_C (NMK_GPIO_ALT_C << PIN_ALT_SHIFT) - -#define PIN_PULL_SHIFT 11 -#define PIN_PULL_MASK (0x3 << PIN_PULL_SHIFT) -#define PIN_PULL(x) (((x) & PIN_PULL_MASK) >> PIN_PULL_SHIFT) -#define PIN_PULL_NONE (NMK_GPIO_PULL_NONE << PIN_PULL_SHIFT) -#define PIN_PULL_UP (NMK_GPIO_PULL_UP << PIN_PULL_SHIFT) -#define PIN_PULL_DOWN (NMK_GPIO_PULL_DOWN << PIN_PULL_SHIFT) - -#define PIN_SLPM_SHIFT 13 -#define PIN_SLPM_MASK (0x1 << PIN_SLPM_SHIFT) -#define PIN_SLPM(x) (((x) & PIN_SLPM_MASK) >> PIN_SLPM_SHIFT) -#define PIN_SLPM_MAKE_INPUT (NMK_GPIO_SLPM_INPUT << PIN_SLPM_SHIFT) -#define PIN_SLPM_NOCHANGE (NMK_GPIO_SLPM_NOCHANGE << PIN_SLPM_SHIFT) -/* These two replace the above in DB8500v2+ */ -#define PIN_SLPM_WAKEUP_ENABLE (NMK_GPIO_SLPM_WAKEUP_ENABLE << PIN_SLPM_SHIFT) -#define PIN_SLPM_WAKEUP_DISABLE (NMK_GPIO_SLPM_WAKEUP_DISABLE << PIN_SLPM_SHIFT) -#define PIN_SLPM_USE_MUX_SETTINGS_IN_SLEEP PIN_SLPM_WAKEUP_DISABLE - -#define PIN_SLPM_GPIO PIN_SLPM_WAKEUP_ENABLE /* In SLPM, pin is a gpio */ -#define PIN_SLPM_ALTFUNC PIN_SLPM_WAKEUP_DISABLE /* In SLPM, pin is altfunc */ - -#define PIN_DIR_SHIFT 14 -#define PIN_DIR_MASK (0x1 << PIN_DIR_SHIFT) -#define PIN_DIR(x) (((x) & PIN_DIR_MASK) >> PIN_DIR_SHIFT) -#define PIN_DIR_INPUT (0 << PIN_DIR_SHIFT) -#define PIN_DIR_OUTPUT (1 << PIN_DIR_SHIFT) - -#define PIN_VAL_SHIFT 15 -#define PIN_VAL_MASK (0x1 << PIN_VAL_SHIFT) -#define PIN_VAL(x) (((x) & PIN_VAL_MASK) >> PIN_VAL_SHIFT) -#define PIN_VAL_LOW (0 << PIN_VAL_SHIFT) -#define PIN_VAL_HIGH (1 << PIN_VAL_SHIFT) - -#define PIN_SLPM_PULL_SHIFT 16 -#define PIN_SLPM_PULL_MASK (0x7 << PIN_SLPM_PULL_SHIFT) -#define PIN_SLPM_PULL(x) \ - (((x) & PIN_SLPM_PULL_MASK) >> PIN_SLPM_PULL_SHIFT) -#define PIN_SLPM_PULL_NONE \ - ((1 + NMK_GPIO_PULL_NONE) << PIN_SLPM_PULL_SHIFT) -#define PIN_SLPM_PULL_UP \ - ((1 + NMK_GPIO_PULL_UP) << PIN_SLPM_PULL_SHIFT) -#define PIN_SLPM_PULL_DOWN \ - ((1 + NMK_GPIO_PULL_DOWN) << PIN_SLPM_PULL_SHIFT) - -#define PIN_SLPM_DIR_SHIFT 19 -#define PIN_SLPM_DIR_MASK (0x3 << PIN_SLPM_DIR_SHIFT) -#define PIN_SLPM_DIR(x) \ - (((x) & PIN_SLPM_DIR_MASK) >> PIN_SLPM_DIR_SHIFT) -#define PIN_SLPM_DIR_INPUT ((1 + 0) << PIN_SLPM_DIR_SHIFT) -#define PIN_SLPM_DIR_OUTPUT ((1 + 1) << PIN_SLPM_DIR_SHIFT) - -#define PIN_SLPM_VAL_SHIFT 21 -#define PIN_SLPM_VAL_MASK (0x3 << PIN_SLPM_VAL_SHIFT) -#define PIN_SLPM_VAL(x) \ - (((x) & PIN_SLPM_VAL_MASK) >> PIN_SLPM_VAL_SHIFT) -#define PIN_SLPM_VAL_LOW ((1 + 0) << PIN_SLPM_VAL_SHIFT) -#define PIN_SLPM_VAL_HIGH ((1 + 1) << PIN_SLPM_VAL_SHIFT) - -#define PIN_SLPM_PDIS_SHIFT 23 -#define PIN_SLPM_PDIS_MASK (0x3 << PIN_SLPM_PDIS_SHIFT) -#define PIN_SLPM_PDIS(x) \ - (((x) & PIN_SLPM_PDIS_MASK) >> PIN_SLPM_PDIS_SHIFT) -#define PIN_SLPM_PDIS_NO_CHANGE (0 << PIN_SLPM_PDIS_SHIFT) -#define PIN_SLPM_PDIS_DISABLED (1 << PIN_SLPM_PDIS_SHIFT) -#define PIN_SLPM_PDIS_ENABLED (2 << PIN_SLPM_PDIS_SHIFT) - -#define PIN_LOWEMI_SHIFT 25 -#define PIN_LOWEMI_MASK (0x1 << PIN_LOWEMI_SHIFT) -#define PIN_LOWEMI(x) (((x) & PIN_LOWEMI_MASK) >> PIN_LOWEMI_SHIFT) -#define PIN_LOWEMI_DISABLED (0 << PIN_LOWEMI_SHIFT) -#define PIN_LOWEMI_ENABLED (1 << PIN_LOWEMI_SHIFT) - -#define PIN_GPIOMODE_SHIFT 26 -#define PIN_GPIOMODE_MASK (0x1 << PIN_GPIOMODE_SHIFT) -#define PIN_GPIOMODE(x) (((x) & PIN_GPIOMODE_MASK) >> PIN_GPIOMODE_SHIFT) -#define PIN_GPIOMODE_DISABLED (0 << PIN_GPIOMODE_SHIFT) -#define PIN_GPIOMODE_ENABLED (1 << PIN_GPIOMODE_SHIFT) - -#define PIN_SLEEPMODE_SHIFT 27 -#define PIN_SLEEPMODE_MASK (0x1 << PIN_SLEEPMODE_SHIFT) -#define PIN_SLEEPMODE(x) (((x) & PIN_SLEEPMODE_MASK) >> PIN_SLEEPMODE_SHIFT) -#define PIN_SLEEPMODE_DISABLED (0 << PIN_SLEEPMODE_SHIFT) -#define PIN_SLEEPMODE_ENABLED (1 << PIN_SLEEPMODE_SHIFT) - - -/* Shortcuts. Use these instead of separate DIR, PULL, and VAL. */ -#define PIN_INPUT_PULLDOWN (PIN_DIR_INPUT | PIN_PULL_DOWN) -#define PIN_INPUT_PULLUP (PIN_DIR_INPUT | PIN_PULL_UP) -#define PIN_INPUT_NOPULL (PIN_DIR_INPUT | PIN_PULL_NONE) -#define PIN_OUTPUT_LOW (PIN_DIR_OUTPUT | PIN_VAL_LOW) -#define PIN_OUTPUT_HIGH (PIN_DIR_OUTPUT | PIN_VAL_HIGH) - -#define PIN_SLPM_INPUT_PULLDOWN (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_DOWN) -#define PIN_SLPM_INPUT_PULLUP (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_UP) -#define PIN_SLPM_INPUT_NOPULL (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_NONE) -#define PIN_SLPM_OUTPUT_LOW (PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_LOW) -#define PIN_SLPM_OUTPUT_HIGH (PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_HIGH) - -#define PIN_CFG_DEFAULT (0) - -#define PIN_CFG(num, alt) \ - (PIN_CFG_DEFAULT |\ - (PIN_NUM(num) | PIN_##alt)) - -#define PIN_CFG_INPUT(num, alt, pull) \ - (PIN_CFG_DEFAULT |\ - (PIN_NUM(num) | PIN_##alt | PIN_INPUT_##pull)) - -#define PIN_CFG_OUTPUT(num, alt, val) \ - (PIN_CFG_DEFAULT |\ - (PIN_NUM(num) | PIN_##alt | PIN_OUTPUT_##val)) - -extern int nmk_config_pin(pin_cfg_t cfg, bool sleep); -extern int nmk_config_pins(pin_cfg_t *cfgs, int num); -extern int nmk_config_pins_sleep(pin_cfg_t *cfgs, int num); - -#endif diff --git a/arch/arm/plat-nomadik/include/plat/ste_dma40.h b/arch/arm/plat-nomadik/include/plat/ste_dma40.h deleted file mode 100644 index 9ff93b065686..000000000000 --- a/arch/arm/plat-nomadik/include/plat/ste_dma40.h +++ /dev/null @@ -1,223 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2007-2010 - * Author: Per Forlin <per.forlin@stericsson.com> for ST-Ericsson - * Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson - * License terms: GNU General Public License (GPL) version 2 - */ - - -#ifndef STE_DMA40_H -#define STE_DMA40_H - -#include <linux/dmaengine.h> -#include <linux/scatterlist.h> -#include <linux/workqueue.h> -#include <linux/interrupt.h> - -/* - * Maxium size for a single dma descriptor - * Size is limited to 16 bits. - * Size is in the units of addr-widths (1,2,4,8 bytes) - * Larger transfers will be split up to multiple linked desc - */ -#define STEDMA40_MAX_SEG_SIZE 0xFFFF - -/* dev types for memcpy */ -#define STEDMA40_DEV_DST_MEMORY (-1) -#define STEDMA40_DEV_SRC_MEMORY (-1) - -enum stedma40_mode { - STEDMA40_MODE_LOGICAL = 0, - STEDMA40_MODE_PHYSICAL, - STEDMA40_MODE_OPERATION, -}; - -enum stedma40_mode_opt { - STEDMA40_PCHAN_BASIC_MODE = 0, - STEDMA40_LCHAN_SRC_LOG_DST_LOG = 0, - STEDMA40_PCHAN_MODULO_MODE, - STEDMA40_PCHAN_DOUBLE_DST_MODE, - STEDMA40_LCHAN_SRC_PHY_DST_LOG, - STEDMA40_LCHAN_SRC_LOG_DST_PHY, -}; - -#define STEDMA40_ESIZE_8_BIT 0x0 -#define STEDMA40_ESIZE_16_BIT 0x1 -#define STEDMA40_ESIZE_32_BIT 0x2 -#define STEDMA40_ESIZE_64_BIT 0x3 - -/* The value 4 indicates that PEN-reg shall be set to 0 */ -#define STEDMA40_PSIZE_PHY_1 0x4 -#define STEDMA40_PSIZE_PHY_2 0x0 -#define STEDMA40_PSIZE_PHY_4 0x1 -#define STEDMA40_PSIZE_PHY_8 0x2 -#define STEDMA40_PSIZE_PHY_16 0x3 - -/* - * The number of elements differ in logical and - * physical mode - */ -#define STEDMA40_PSIZE_LOG_1 STEDMA40_PSIZE_PHY_2 -#define STEDMA40_PSIZE_LOG_4 STEDMA40_PSIZE_PHY_4 -#define STEDMA40_PSIZE_LOG_8 STEDMA40_PSIZE_PHY_8 -#define STEDMA40_PSIZE_LOG_16 STEDMA40_PSIZE_PHY_16 - -/* Maximum number of possible physical channels */ -#define STEDMA40_MAX_PHYS 32 - -enum stedma40_flow_ctrl { - STEDMA40_NO_FLOW_CTRL, - STEDMA40_FLOW_CTRL, -}; - -enum stedma40_periph_data_width { - STEDMA40_BYTE_WIDTH = STEDMA40_ESIZE_8_BIT, - STEDMA40_HALFWORD_WIDTH = STEDMA40_ESIZE_16_BIT, - STEDMA40_WORD_WIDTH = STEDMA40_ESIZE_32_BIT, - STEDMA40_DOUBLEWORD_WIDTH = STEDMA40_ESIZE_64_BIT -}; - -enum stedma40_xfer_dir { - STEDMA40_MEM_TO_MEM = 1, - STEDMA40_MEM_TO_PERIPH, - STEDMA40_PERIPH_TO_MEM, - STEDMA40_PERIPH_TO_PERIPH -}; - - -/** - * struct stedma40_chan_cfg - dst/src channel configuration - * - * @big_endian: true if the src/dst should be read as big endian - * @data_width: Data width of the src/dst hardware - * @p_size: Burst size - * @flow_ctrl: Flow control on/off. - */ -struct stedma40_half_channel_info { - bool big_endian; - enum stedma40_periph_data_width data_width; - int psize; - enum stedma40_flow_ctrl flow_ctrl; -}; - -/** - * struct stedma40_chan_cfg - Structure to be filled by client drivers. - * - * @dir: MEM 2 MEM, PERIPH 2 MEM , MEM 2 PERIPH, PERIPH 2 PERIPH - * @high_priority: true if high-priority - * @realtime: true if realtime mode is to be enabled. Only available on DMA40 - * version 3+, i.e DB8500v2+ - * @mode: channel mode: physical, logical, or operation - * @mode_opt: options for the chosen channel mode - * @src_dev_type: Src device type - * @dst_dev_type: Dst device type - * @src_info: Parameters for dst half channel - * @dst_info: Parameters for dst half channel - * @use_fixed_channel: if true, use physical channel specified by phy_channel - * @phy_channel: physical channel to use, only if use_fixed_channel is true - * - * This structure has to be filled by the client drivers. - * It is recommended to do all dma configurations for clients in the machine. - * - */ -struct stedma40_chan_cfg { - enum stedma40_xfer_dir dir; - bool high_priority; - bool realtime; - enum stedma40_mode mode; - enum stedma40_mode_opt mode_opt; - int src_dev_type; - int dst_dev_type; - struct stedma40_half_channel_info src_info; - struct stedma40_half_channel_info dst_info; - - bool use_fixed_channel; - int phy_channel; -}; - -/** - * struct stedma40_platform_data - Configuration struct for the dma device. - * - * @dev_len: length of dev_tx and dev_rx - * @dev_tx: mapping between destination event line and io address - * @dev_rx: mapping between source event line and io address - * @memcpy: list of memcpy event lines - * @memcpy_len: length of memcpy - * @memcpy_conf_phy: default configuration of physical channel memcpy - * @memcpy_conf_log: default configuration of logical channel memcpy - * @disabled_channels: A vector, ending with -1, that marks physical channels - * that are for different reasons not available for the driver. - */ -struct stedma40_platform_data { - u32 dev_len; - const dma_addr_t *dev_tx; - const dma_addr_t *dev_rx; - int *memcpy; - u32 memcpy_len; - struct stedma40_chan_cfg *memcpy_conf_phy; - struct stedma40_chan_cfg *memcpy_conf_log; - int disabled_channels[STEDMA40_MAX_PHYS]; - bool use_esram_lcla; -}; - -#ifdef CONFIG_STE_DMA40 - -/** - * stedma40_filter() - Provides stedma40_chan_cfg to the - * ste_dma40 dma driver via the dmaengine framework. - * does some checking of what's provided. - * - * Never directly called by client. It used by dmaengine. - * @chan: dmaengine handle. - * @data: Must be of type: struct stedma40_chan_cfg and is - * the configuration of the framework. - * - * - */ - -bool stedma40_filter(struct dma_chan *chan, void *data); - -/** - * stedma40_slave_mem() - Transfers a raw data buffer to or from a slave - * (=device) - * - * @chan: dmaengine handle - * @addr: source or destination physicall address. - * @size: bytes to transfer - * @direction: direction of transfer - * @flags: is actually enum dma_ctrl_flags. See dmaengine.h - */ - -static inline struct -dma_async_tx_descriptor *stedma40_slave_mem(struct dma_chan *chan, - dma_addr_t addr, - unsigned int size, - enum dma_transfer_direction direction, - unsigned long flags) -{ - struct scatterlist sg; - sg_init_table(&sg, 1); - sg.dma_address = addr; - sg.length = size; - - return dmaengine_prep_slave_sg(chan, &sg, 1, direction, flags); -} - -#else -static inline bool stedma40_filter(struct dma_chan *chan, void *data) -{ - return false; -} - -static inline struct -dma_async_tx_descriptor *stedma40_slave_mem(struct dma_chan *chan, - dma_addr_t addr, - unsigned int size, - enum dma_transfer_direction direction, - unsigned long flags) -{ - return NULL; -} -#endif - -#endif diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c deleted file mode 100644 index 9222e5522a43..000000000000 --- a/arch/arm/plat-nomadik/timer.c +++ /dev/null @@ -1,223 +0,0 @@ -/* - * linux/arch/arm/plat-nomadik/timer.c - * - * Copyright (C) 2008 STMicroelectronics - * Copyright (C) 2010 Alessandro Rubini - * Copyright (C) 2010 Linus Walleij for ST-Ericsson - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2, as - * published by the Free Software Foundation. - */ -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <linux/clockchips.h> -#include <linux/clk.h> -#include <linux/jiffies.h> -#include <linux/err.h> -#include <asm/mach/time.h> -#include <asm/sched_clock.h> - -/* - * The MTU device hosts four different counters, with 4 set of - * registers. These are register names. - */ - -#define MTU_IMSC 0x00 /* Interrupt mask set/clear */ -#define MTU_RIS 0x04 /* Raw interrupt status */ -#define MTU_MIS 0x08 /* Masked interrupt status */ -#define MTU_ICR 0x0C /* Interrupt clear register */ - -/* per-timer registers take 0..3 as argument */ -#define MTU_LR(x) (0x10 + 0x10 * (x) + 0x00) /* Load value */ -#define MTU_VAL(x) (0x10 + 0x10 * (x) + 0x04) /* Current value */ -#define MTU_CR(x) (0x10 + 0x10 * (x) + 0x08) /* Control reg */ -#define MTU_BGLR(x) (0x10 + 0x10 * (x) + 0x0c) /* At next overflow */ - -/* bits for the control register */ -#define MTU_CRn_ENA 0x80 -#define MTU_CRn_PERIODIC 0x40 /* if 0 = free-running */ -#define MTU_CRn_PRESCALE_MASK 0x0c -#define MTU_CRn_PRESCALE_1 0x00 -#define MTU_CRn_PRESCALE_16 0x04 -#define MTU_CRn_PRESCALE_256 0x08 -#define MTU_CRn_32BITS 0x02 -#define MTU_CRn_ONESHOT 0x01 /* if 0 = wraps reloading from BGLR*/ - -/* Other registers are usual amba/primecell registers, currently not used */ -#define MTU_ITCR 0xff0 -#define MTU_ITOP 0xff4 - -#define MTU_PERIPH_ID0 0xfe0 -#define MTU_PERIPH_ID1 0xfe4 -#define MTU_PERIPH_ID2 0xfe8 -#define MTU_PERIPH_ID3 0xfeC - -#define MTU_PCELL0 0xff0 -#define MTU_PCELL1 0xff4 -#define MTU_PCELL2 0xff8 -#define MTU_PCELL3 0xffC - -static void __iomem *mtu_base; -static bool clkevt_periodic; -static u32 clk_prescale; -static u32 nmdk_cycle; /* write-once */ - -#ifdef CONFIG_NOMADIK_MTU_SCHED_CLOCK -/* - * Override the global weak sched_clock symbol with this - * local implementation which uses the clocksource to get some - * better resolution when scheduling the kernel. - */ -static u32 notrace nomadik_read_sched_clock(void) -{ - if (unlikely(!mtu_base)) - return 0; - - return -readl(mtu_base + MTU_VAL(0)); -} -#endif - -/* Clockevent device: use one-shot mode */ -static int nmdk_clkevt_next(unsigned long evt, struct clock_event_device *ev) -{ - writel(1 << 1, mtu_base + MTU_IMSC); - writel(evt, mtu_base + MTU_LR(1)); - /* Load highest value, enable device, enable interrupts */ - writel(MTU_CRn_ONESHOT | clk_prescale | - MTU_CRn_32BITS | MTU_CRn_ENA, - mtu_base + MTU_CR(1)); - - return 0; -} - -void nmdk_clkevt_reset(void) -{ - if (clkevt_periodic) { - /* Timer: configure load and background-load, and fire it up */ - writel(nmdk_cycle, mtu_base + MTU_LR(1)); - writel(nmdk_cycle, mtu_base + MTU_BGLR(1)); - - writel(MTU_CRn_PERIODIC | clk_prescale | - MTU_CRn_32BITS | MTU_CRn_ENA, - mtu_base + MTU_CR(1)); - writel(1 << 1, mtu_base + MTU_IMSC); - } else { - /* Generate an interrupt to start the clockevent again */ - (void) nmdk_clkevt_next(nmdk_cycle, NULL); - } -} - -static void nmdk_clkevt_mode(enum clock_event_mode mode, - struct clock_event_device *dev) -{ - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - clkevt_periodic = true; - nmdk_clkevt_reset(); - break; - case CLOCK_EVT_MODE_ONESHOT: - clkevt_periodic = false; - break; - case CLOCK_EVT_MODE_SHUTDOWN: - case CLOCK_EVT_MODE_UNUSED: - writel(0, mtu_base + MTU_IMSC); - /* disable timer */ - writel(0, mtu_base + MTU_CR(1)); - /* load some high default value */ - writel(0xffffffff, mtu_base + MTU_LR(1)); - break; - case CLOCK_EVT_MODE_RESUME: - break; - } -} - -static struct clock_event_device nmdk_clkevt = { - .name = "mtu_1", - .features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC, - .rating = 200, - .set_mode = nmdk_clkevt_mode, - .set_next_event = nmdk_clkevt_next, -}; - -/* - * IRQ Handler for timer 1 of the MTU block. - */ -static irqreturn_t nmdk_timer_interrupt(int irq, void *dev_id) -{ - struct clock_event_device *evdev = dev_id; - - writel(1 << 1, mtu_base + MTU_ICR); /* Interrupt clear reg */ - evdev->event_handler(evdev); - return IRQ_HANDLED; -} - -static struct irqaction nmdk_timer_irq = { - .name = "Nomadik Timer Tick", - .flags = IRQF_DISABLED | IRQF_TIMER, - .handler = nmdk_timer_interrupt, - .dev_id = &nmdk_clkevt, -}; - -void nmdk_clksrc_reset(void) -{ - /* Disable */ - writel(0, mtu_base + MTU_CR(0)); - - /* ClockSource: configure load and background-load, and fire it up */ - writel(nmdk_cycle, mtu_base + MTU_LR(0)); - writel(nmdk_cycle, mtu_base + MTU_BGLR(0)); - - writel(clk_prescale | MTU_CRn_32BITS | MTU_CRn_ENA, - mtu_base + MTU_CR(0)); -} - -void __init nmdk_timer_init(void __iomem *base) -{ - unsigned long rate; - struct clk *clk0; - - mtu_base = base; - clk0 = clk_get_sys("mtu0", NULL); - BUG_ON(IS_ERR(clk0)); - BUG_ON(clk_prepare(clk0) < 0); - BUG_ON(clk_enable(clk0) < 0); - - /* - * Tick rate is 2.4MHz for Nomadik and 2.4Mhz, 100MHz or 133 MHz - * for ux500. - * Use a divide-by-16 counter if the tick rate is more than 32MHz. - * At 32 MHz, the timer (with 32 bit counter) can be programmed - * to wake-up at a max 127s a head in time. Dividing a 2.4 MHz timer - * with 16 gives too low timer resolution. - */ - rate = clk_get_rate(clk0); - if (rate > 32000000) { - rate /= 16; - clk_prescale = MTU_CRn_PRESCALE_16; - } else { - clk_prescale = MTU_CRn_PRESCALE_1; - } - - nmdk_cycle = (rate + HZ/2) / HZ; - - - /* Timer 0 is the free running clocksource */ - nmdk_clksrc_reset(); - - if (clocksource_mmio_init(mtu_base + MTU_VAL(0), "mtu_0", - rate, 200, 32, clocksource_mmio_readl_down)) - pr_err("timer: failed to initialize clock source %s\n", - "mtu_0"); - -#ifdef CONFIG_NOMADIK_MTU_SCHED_CLOCK - setup_sched_clock(nomadik_read_sched_clock, 32, rate); -#endif - - /* Timer 1 is used for events, register irq and clockevents */ - setup_irq(IRQ_MTU0, &nmdk_timer_irq); - nmdk_clkevt.cpumask = cpumask_of(0); - clockevents_config_and_register(&nmdk_clkevt, rate, 2, 0xffffffffU); -} |