diff options
Diffstat (limited to 'arch/arm/plat-omap/include')
47 files changed, 38 insertions, 3315 deletions
diff --git a/arch/arm/plat-omap/include/plat/am33xx.h b/arch/arm/plat-omap/include/plat/am33xx.h deleted file mode 100644 index 06c19bb7bca6..000000000000 --- a/arch/arm/plat-omap/include/plat/am33xx.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * This file contains the address info for various AM33XX modules. - * - * Copyright (C) 2011 Texas Instruments, Inc. - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __ASM_ARCH_AM33XX_H -#define __ASM_ARCH_AM33XX_H - -#define L4_SLOW_AM33XX_BASE 0x48000000 - -#define AM33XX_SCM_BASE 0x44E10000 -#define AM33XX_CTRL_BASE AM33XX_SCM_BASE -#define AM33XX_PRCM_BASE 0x44E00000 - -#endif /* __ASM_ARCH_AM33XX_H */ diff --git a/arch/arm/plat-omap/include/plat/board-ams-delta.h b/arch/arm/plat-omap/include/plat/board-ams-delta.h deleted file mode 100644 index ad6f865d1f16..000000000000 --- a/arch/arm/plat-omap/include/plat/board-ams-delta.h +++ /dev/null @@ -1,71 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/board-ams-delta.h - * - * Copyright (C) 2006 Jonathan McDowell <noodles@earth.li> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#ifndef __ASM_ARCH_OMAP_AMS_DELTA_H -#define __ASM_ARCH_OMAP_AMS_DELTA_H - -#if defined (CONFIG_MACH_AMS_DELTA) - -#define AMD_DELTA_LATCH2_SCARD_RSTIN 0x0400 -#define AMD_DELTA_LATCH2_SCARD_CMDVCC 0x0800 -#define AMS_DELTA_LATCH2_MODEM_CODEC 0x2000 - -#define AMS_DELTA_GPIO_PIN_KEYBRD_DATA 0 -#define AMS_DELTA_GPIO_PIN_KEYBRD_CLK 1 -#define AMS_DELTA_GPIO_PIN_MODEM_IRQ 2 -#define AMS_DELTA_GPIO_PIN_HOOK_SWITCH 4 -#define AMS_DELTA_GPIO_PIN_SCARD_NOFF 6 -#define AMS_DELTA_GPIO_PIN_SCARD_IO 7 -#define AMS_DELTA_GPIO_PIN_CONFIG 11 -#define AMS_DELTA_GPIO_PIN_NAND_RB 12 - -#define AMS_DELTA_GPIO_PIN_LCD_VBLEN 240 -#define AMS_DELTA_GPIO_PIN_LCD_NDISP 241 -#define AMS_DELTA_GPIO_PIN_NAND_NCE 242 -#define AMS_DELTA_GPIO_PIN_NAND_NRE 243 -#define AMS_DELTA_GPIO_PIN_NAND_NWP 244 -#define AMS_DELTA_GPIO_PIN_NAND_NWE 245 -#define AMS_DELTA_GPIO_PIN_NAND_ALE 246 -#define AMS_DELTA_GPIO_PIN_NAND_CLE 247 -#define AMS_DELTA_GPIO_PIN_KEYBRD_PWR 248 -#define AMS_DELTA_GPIO_PIN_KEYBRD_DATAOUT 249 -#define AMS_DELTA_GPIO_PIN_SCARD_RSTIN 250 -#define AMS_DELTA_GPIO_PIN_SCARD_CMDVCC 251 -#define AMS_DELTA_GPIO_PIN_MODEM_NRESET 252 -#define AMS_DELTA_GPIO_PIN_MODEM_CODEC 253 - -#define AMS_DELTA_LATCH2_GPIO_BASE AMS_DELTA_GPIO_PIN_LCD_VBLEN -#define AMS_DELTA_LATCH2_NGPIO 16 - -#ifndef __ASSEMBLY__ -void ams_delta_latch_write(int base, int ngpio, u16 mask, u16 value); -#define ams_delta_latch2_write(mask, value) \ - ams_delta_latch_write(AMS_DELTA_LATCH2_GPIO_BASE, \ - AMS_DELTA_LATCH2_NGPIO, (mask), (value)) -#endif - -#endif /* CONFIG_MACH_AMS_DELTA */ - -#endif /* __ASM_ARCH_OMAP_AMS_DELTA_H */ diff --git a/arch/arm/plat-omap/include/plat/board-sx1.h b/arch/arm/plat-omap/include/plat/board-sx1.h deleted file mode 100644 index 355adbdaae33..000000000000 --- a/arch/arm/plat-omap/include/plat/board-sx1.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * Siemens SX1 board definitions - * - * Copyright: Vovan888 at gmail com - * - * This package is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED - * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. - */ - -#ifndef __ASM_ARCH_SX1_I2C_CHIPS_H -#define __ASM_ARCH_SX1_I2C_CHIPS_H - -#define SOFIA_MAX_LIGHT_VAL 0x2B - -#define SOFIA_I2C_ADDR 0x32 -/* Sofia reg 3 bits masks */ -#define SOFIA_POWER1_REG 0x03 - -#define SOFIA_USB_POWER 0x01 -#define SOFIA_MMC_POWER 0x04 -#define SOFIA_BLUETOOTH_POWER 0x08 -#define SOFIA_MMILIGHT_POWER 0x20 - -#define SOFIA_POWER2_REG 0x04 -#define SOFIA_BACKLIGHT_REG 0x06 -#define SOFIA_KEYLIGHT_REG 0x07 -#define SOFIA_DIMMING_REG 0x09 - - -/* Function Prototypes for SX1 devices control on I2C bus */ - -int sx1_setbacklight(u8 backlight); -int sx1_getbacklight(u8 *backlight); -int sx1_setkeylight(u8 keylight); -int sx1_getkeylight(u8 *keylight); - -int sx1_setmmipower(u8 onoff); -int sx1_setusbpower(u8 onoff); -int sx1_i2c_read_byte(u8 devaddr, u8 regoffset, u8 *value); -int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value); - -/* MMC prototypes */ - -extern void sx1_mmc_init(void); -extern void sx1_mmc_slot_cover_handler(void *arg, int state); - -#endif /* __ASM_ARCH_SX1_I2C_CHIPS_H */ diff --git a/arch/arm/plat-omap/include/plat/board-voiceblue.h b/arch/arm/plat-omap/include/plat/board-voiceblue.h deleted file mode 100644 index 27916b210f57..000000000000 --- a/arch/arm/plat-omap/include/plat/board-voiceblue.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz> - * - * Hardware definitions for OMAP5910 based VoiceBlue board. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_VOICEBLUE_H -#define __ASM_ARCH_VOICEBLUE_H - -extern void voiceblue_wdt_enable(void); -extern void voiceblue_wdt_disable(void); -extern void voiceblue_wdt_ping(void); - -#endif /* __ASM_ARCH_VOICEBLUE_H */ - diff --git a/arch/arm/plat-omap/include/plat/board.h b/arch/arm/plat-omap/include/plat/board.h deleted file mode 100644 index e62f20a5c0af..000000000000 --- a/arch/arm/plat-omap/include/plat/board.h +++ /dev/null @@ -1,138 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/board.h - * - * Information structures for board-specific data - * - * Copyright (C) 2004 Nokia Corporation - * Written by Juha Yrjölä <juha.yrjola@nokia.com> - */ - -#ifndef _OMAP_BOARD_H -#define _OMAP_BOARD_H - -#include <linux/types.h> - -#include <plat/gpio-switch.h> - -/* - * OMAP35x EVM revision - * Run time detection of EVM revision is done by reading Ethernet - * PHY ID - - * GEN_1 = 0x01150000 - * GEN_2 = 0x92200000 - */ -enum { - OMAP3EVM_BOARD_GEN_1 = 0, /* EVM Rev between A - D */ - OMAP3EVM_BOARD_GEN_2, /* EVM Rev >= Rev E */ -}; - -/* Different peripheral ids */ -#define OMAP_TAG_CLOCK 0x4f01 -#define OMAP_TAG_GPIO_SWITCH 0x4f06 -#define OMAP_TAG_STI_CONSOLE 0x4f09 -#define OMAP_TAG_CAMERA_SENSOR 0x4f0a - -#define OMAP_TAG_BOOT_REASON 0x4f80 -#define OMAP_TAG_FLASH_PART 0x4f81 -#define OMAP_TAG_VERSION_STR 0x4f82 - -struct omap_clock_config { - /* 0 for 12 MHz, 1 for 13 MHz and 2 for 19.2 MHz */ - u8 system_clock_type; -}; - -struct omap_serial_console_config { - u8 console_uart; - u32 console_speed; -}; - -struct omap_sti_console_config { - unsigned enable:1; - u8 channel; -}; - -struct omap_camera_sensor_config { - u16 reset_gpio; - int (*power_on)(void * data); - int (*power_off)(void * data); -}; - -struct omap_lcd_config { - char panel_name[16]; - char ctrl_name[16]; - s16 nreset_gpio; - u8 data_lines; -}; - -struct device; -struct fb_info; -struct omap_backlight_config { - int default_intensity; - int (*set_power)(struct device *dev, int state); -}; - -struct omap_fbmem_config { - u32 start; - u32 size; -}; - -struct omap_pwm_led_platform_data { - const char *name; - int intensity_timer; - int blink_timer; - void (*set_power)(struct omap_pwm_led_platform_data *self, int on_off); -}; - -struct omap_uart_config { - /* Bit field of UARTs present; bit 0 --> UART1 */ - unsigned int enabled_uarts; -}; - - -struct omap_flash_part_config { - char part_table[0]; -}; - -struct omap_boot_reason_config { - char reason_str[12]; -}; - -struct omap_version_config { - char component[12]; - char version[12]; -}; - -struct omap_board_config_entry { - u16 tag; - u16 len; - u8 data[0]; -}; - -struct omap_board_config_kernel { - u16 tag; - const void *data; -}; - -extern const void *__init __omap_get_config(u16 tag, size_t len, int nr); - -#define omap_get_config(tag, type) \ - ((const type *) __omap_get_config((tag), sizeof(type), 0)) -#define omap_get_nr_config(tag, type, nr) \ - ((const type *) __omap_get_config((tag), sizeof(type), (nr))) - -extern const void *__init omap_get_var_config(u16 tag, size_t *len); - -extern struct omap_board_config_kernel *omap_board_config; -extern int omap_board_config_size; - - -/* for TI reference platforms sharing the same debug card */ -extern int debug_card_init(u32 addr, unsigned gpio); - -/* OMAP3EVM revision */ -#if defined(CONFIG_MACH_OMAP3EVM) -u8 get_omap3_evm_rev(void); -#else -#define get_omap3_evm_rev() (-EINVAL) -#endif -#endif diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index bb5d08a70dbc..67da857783ce 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -30,6 +30,8 @@ #ifndef __ASM_ARCH_OMAP_CPU_H #define __ASM_ARCH_OMAP_CPU_H +#ifndef __ASSEMBLY__ + #include <linux/bitops.h> #include <plat/multi.h> @@ -493,4 +495,5 @@ OMAP4_HAS_FEATURE(mpu_1ghz, MPU_1GHZ) OMAP4_HAS_FEATURE(mpu_1_2ghz, MPU_1_2GHZ) OMAP4_HAS_FEATURE(mpu_1_5ghz, MPU_1_5GHZ) +#endif /* __ASSEMBLY__ */ #endif diff --git a/arch/arm/plat-omap/include/plat/dma.h b/arch/arm/plat-omap/include/plat/dma.h index c5811d4409b0..0a87b052f8f7 100644 --- a/arch/arm/plat-omap/include/plat/dma.h +++ b/arch/arm/plat-omap/include/plat/dma.h @@ -31,6 +31,8 @@ /* Move omap4 specific defines to dma-44xx.h */ #include "dma-44xx.h" +#define INT_DMA_LCD 25 + /* DMA channels for omap1 */ #define OMAP_DMA_NO_DEVICE 0 #define OMAP_DMA_MCSI1_TX 1 diff --git a/arch/arm/plat-omap/include/plat/dsp.h b/arch/arm/plat-omap/include/plat/dsp.h deleted file mode 100644 index 5927709b1908..000000000000 --- a/arch/arm/plat-omap/include/plat/dsp.h +++ /dev/null @@ -1,34 +0,0 @@ -#ifndef __OMAP_DSP_H__ -#define __OMAP_DSP_H__ - -#include <linux/types.h> - -struct omap_dsp_platform_data { - void (*dsp_set_min_opp) (u8 opp_id); - u8 (*dsp_get_opp) (void); - void (*cpu_set_freq) (unsigned long f); - unsigned long (*cpu_get_freq) (void); - unsigned long mpu_speed[6]; - - /* functions to write and read PRCM registers */ - void (*dsp_prm_write)(u32, s16 , u16); - u32 (*dsp_prm_read)(s16 , u16); - u32 (*dsp_prm_rmw_bits)(u32, u32, s16, s16); - void (*dsp_cm_write)(u32, s16 , u16); - u32 (*dsp_cm_read)(s16 , u16); - u32 (*dsp_cm_rmw_bits)(u32, u32, s16, s16); - - void (*set_bootaddr)(u32); - void (*set_bootmode)(u8); - - phys_addr_t phys_mempool_base; - phys_addr_t phys_mempool_size; -}; - -#if defined(CONFIG_TIDSPBRIDGE) || defined(CONFIG_TIDSPBRIDGE_MODULE) -extern void omap_dsp_reserve_sdram_memblock(void); -#else -static inline void omap_dsp_reserve_sdram_memblock(void) { } -#endif - -#endif diff --git a/arch/arm/plat-omap/include/plat/flash.h b/arch/arm/plat-omap/include/plat/flash.h deleted file mode 100644 index 0d88499b79e9..000000000000 --- a/arch/arm/plat-omap/include/plat/flash.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * Flash support for OMAP1 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __OMAP_FLASH_H -#define __OMAP_FLASH_H - -#include <linux/mtd/map.h> - -struct platform_device; -extern void omap1_set_vpp(struct platform_device *pdev, int enable); - -#endif diff --git a/arch/arm/plat-omap/include/plat/gpio-switch.h b/arch/arm/plat-omap/include/plat/gpio-switch.h deleted file mode 100644 index 10da0e07c0cf..000000000000 --- a/arch/arm/plat-omap/include/plat/gpio-switch.h +++ /dev/null @@ -1,54 +0,0 @@ -/* - * GPIO switch definitions - * - * Copyright (C) 2006 Nokia Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_OMAP_GPIO_SWITCH_H -#define __ASM_ARCH_OMAP_GPIO_SWITCH_H - -#include <linux/types.h> - -/* Cover: - * high -> closed - * low -> open - * Connection: - * high -> connected - * low -> disconnected - * Activity: - * high -> active - * low -> inactive - * - */ -#define OMAP_GPIO_SWITCH_TYPE_COVER 0x0000 -#define OMAP_GPIO_SWITCH_TYPE_CONNECTION 0x0001 -#define OMAP_GPIO_SWITCH_TYPE_ACTIVITY 0x0002 -#define OMAP_GPIO_SWITCH_FLAG_INVERTED 0x0001 -#define OMAP_GPIO_SWITCH_FLAG_OUTPUT 0x0002 - -struct omap_gpio_switch { - const char *name; - s16 gpio; - unsigned flags:4; - unsigned type:4; - - /* Time in ms to debounce when transitioning from - * inactive state to active state. */ - u16 debounce_rising; - /* Same for transition from active to inactive state. */ - u16 debounce_falling; - - /* notify board-specific code about state changes */ - void (* notify)(void *data, int state); - void *notify_data; -}; - -/* Call at init time only */ -extern void omap_register_gpio_switches(const struct omap_gpio_switch *tbl, - int count); - -#endif diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h deleted file mode 100644 index 50fb7cc000ea..000000000000 --- a/arch/arm/plat-omap/include/plat/gpio.h +++ /dev/null @@ -1,228 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/gpio.h - * - * OMAP GPIO handling defines and functions - * - * Copyright (C) 2003-2005 Nokia Corporation - * - * Written by Juha Yrjölä <juha.yrjola@nokia.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#ifndef __ASM_ARCH_OMAP_GPIO_H -#define __ASM_ARCH_OMAP_GPIO_H - -#include <linux/io.h> -#include <linux/platform_device.h> -#include <mach/irqs.h> - -#define OMAP1_MPUIO_BASE 0xfffb5000 - -/* - * These are the omap15xx/16xx offsets. The omap7xx offset are - * OMAP_MPUIO_ / 2 offsets below. - */ -#define OMAP_MPUIO_INPUT_LATCH 0x00 -#define OMAP_MPUIO_OUTPUT 0x04 -#define OMAP_MPUIO_IO_CNTL 0x08 -#define OMAP_MPUIO_KBR_LATCH 0x10 -#define OMAP_MPUIO_KBC 0x14 -#define OMAP_MPUIO_GPIO_EVENT_MODE 0x18 -#define OMAP_MPUIO_GPIO_INT_EDGE 0x1c -#define OMAP_MPUIO_KBD_INT 0x20 -#define OMAP_MPUIO_GPIO_INT 0x24 -#define OMAP_MPUIO_KBD_MASKIT 0x28 -#define OMAP_MPUIO_GPIO_MASKIT 0x2c -#define OMAP_MPUIO_GPIO_DEBOUNCING 0x30 -#define OMAP_MPUIO_LATCH 0x34 - -#define OMAP34XX_NR_GPIOS 6 - -/* - * OMAP1510 GPIO registers - */ -#define OMAP1510_GPIO_DATA_INPUT 0x00 -#define OMAP1510_GPIO_DATA_OUTPUT 0x04 -#define OMAP1510_GPIO_DIR_CONTROL 0x08 -#define OMAP1510_GPIO_INT_CONTROL 0x0c -#define OMAP1510_GPIO_INT_MASK 0x10 -#define OMAP1510_GPIO_INT_STATUS 0x14 -#define OMAP1510_GPIO_PIN_CONTROL 0x18 - -#define OMAP1510_IH_GPIO_BASE 64 - -/* - * OMAP1610 specific GPIO registers - */ -#define OMAP1610_GPIO_REVISION 0x0000 -#define OMAP1610_GPIO_SYSCONFIG 0x0010 -#define OMAP1610_GPIO_SYSSTATUS 0x0014 -#define OMAP1610_GPIO_IRQSTATUS1 0x0018 -#define OMAP1610_GPIO_IRQENABLE1 0x001c -#define OMAP1610_GPIO_WAKEUPENABLE 0x0028 -#define OMAP1610_GPIO_DATAIN 0x002c -#define OMAP1610_GPIO_DATAOUT 0x0030 -#define OMAP1610_GPIO_DIRECTION 0x0034 -#define OMAP1610_GPIO_EDGE_CTRL1 0x0038 -#define OMAP1610_GPIO_EDGE_CTRL2 0x003c -#define OMAP1610_GPIO_CLEAR_IRQENABLE1 0x009c -#define OMAP1610_GPIO_CLEAR_WAKEUPENA 0x00a8 -#define OMAP1610_GPIO_CLEAR_DATAOUT 0x00b0 -#define OMAP1610_GPIO_SET_IRQENABLE1 0x00dc -#define OMAP1610_GPIO_SET_WAKEUPENA 0x00e8 -#define OMAP1610_GPIO_SET_DATAOUT 0x00f0 - -/* - * OMAP7XX specific GPIO registers - */ -#define OMAP7XX_GPIO_DATA_INPUT 0x00 -#define OMAP7XX_GPIO_DATA_OUTPUT 0x04 -#define OMAP7XX_GPIO_DIR_CONTROL 0x08 -#define OMAP7XX_GPIO_INT_CONTROL 0x0c -#define OMAP7XX_GPIO_INT_MASK 0x10 -#define OMAP7XX_GPIO_INT_STATUS 0x14 - -/* - * omap2+ specific GPIO registers - */ -#define OMAP24XX_GPIO_REVISION 0x0000 -#define OMAP24XX_GPIO_IRQSTATUS1 0x0018 -#define OMAP24XX_GPIO_IRQSTATUS2 0x0028 -#define OMAP24XX_GPIO_IRQENABLE2 0x002c -#define OMAP24XX_GPIO_IRQENABLE1 0x001c -#define OMAP24XX_GPIO_WAKE_EN 0x0020 -#define OMAP24XX_GPIO_CTRL 0x0030 -#define OMAP24XX_GPIO_OE 0x0034 -#define OMAP24XX_GPIO_DATAIN 0x0038 -#define OMAP24XX_GPIO_DATAOUT 0x003c -#define OMAP24XX_GPIO_LEVELDETECT0 0x0040 -#define OMAP24XX_GPIO_LEVELDETECT1 0x0044 -#define OMAP24XX_GPIO_RISINGDETECT 0x0048 -#define OMAP24XX_GPIO_FALLINGDETECT 0x004c -#define OMAP24XX_GPIO_DEBOUNCE_EN 0x0050 -#define OMAP24XX_GPIO_DEBOUNCE_VAL 0x0054 -#define OMAP24XX_GPIO_CLEARIRQENABLE1 0x0060 -#define OMAP24XX_GPIO_SETIRQENABLE1 0x0064 -#define OMAP24XX_GPIO_CLEARWKUENA 0x0080 -#define OMAP24XX_GPIO_SETWKUENA 0x0084 -#define OMAP24XX_GPIO_CLEARDATAOUT 0x0090 -#define OMAP24XX_GPIO_SETDATAOUT 0x0094 - -#define OMAP4_GPIO_REVISION 0x0000 -#define OMAP4_GPIO_EOI 0x0020 -#define OMAP4_GPIO_IRQSTATUSRAW0 0x0024 -#define OMAP4_GPIO_IRQSTATUSRAW1 0x0028 -#define OMAP4_GPIO_IRQSTATUS0 0x002c -#define OMAP4_GPIO_IRQSTATUS1 0x0030 -#define OMAP4_GPIO_IRQSTATUSSET0 0x0034 -#define OMAP4_GPIO_IRQSTATUSSET1 0x0038 -#define OMAP4_GPIO_IRQSTATUSCLR0 0x003c -#define OMAP4_GPIO_IRQSTATUSCLR1 0x0040 -#define OMAP4_GPIO_IRQWAKEN0 0x0044 -#define OMAP4_GPIO_IRQWAKEN1 0x0048 -#define OMAP4_GPIO_IRQENABLE1 0x011c -#define OMAP4_GPIO_WAKE_EN 0x0120 -#define OMAP4_GPIO_IRQSTATUS2 0x0128 -#define OMAP4_GPIO_IRQENABLE2 0x012c -#define OMAP4_GPIO_CTRL 0x0130 -#define OMAP4_GPIO_OE 0x0134 -#define OMAP4_GPIO_DATAIN 0x0138 -#define OMAP4_GPIO_DATAOUT 0x013c -#define OMAP4_GPIO_LEVELDETECT0 0x0140 -#define OMAP4_GPIO_LEVELDETECT1 0x0144 -#define OMAP4_GPIO_RISINGDETECT 0x0148 -#define OMAP4_GPIO_FALLINGDETECT 0x014c -#define OMAP4_GPIO_DEBOUNCENABLE 0x0150 -#define OMAP4_GPIO_DEBOUNCINGTIME 0x0154 -#define OMAP4_GPIO_CLEARIRQENABLE1 0x0160 -#define OMAP4_GPIO_SETIRQENABLE1 0x0164 -#define OMAP4_GPIO_CLEARWKUENA 0x0180 -#define OMAP4_GPIO_SETWKUENA 0x0184 -#define OMAP4_GPIO_CLEARDATAOUT 0x0190 -#define OMAP4_GPIO_SETDATAOUT 0x0194 - -#define OMAP_MPUIO(nr) (OMAP_MAX_GPIO_LINES + (nr)) -#define OMAP_GPIO_IS_MPUIO(nr) ((nr) >= OMAP_MAX_GPIO_LINES) - -struct omap_gpio_dev_attr { - int bank_width; /* GPIO bank width */ - bool dbck_flag; /* dbck required or not - True for OMAP3&4 */ -}; - -struct omap_gpio_reg_offs { - u16 revision; - u16 direction; - u16 datain; - u16 dataout; - u16 set_dataout; - u16 clr_dataout; - u16 irqstatus; - u16 irqstatus2; - u16 irqstatus_raw0; - u16 irqstatus_raw1; - u16 irqenable; - u16 irqenable2; - u16 set_irqenable; - u16 clr_irqenable; - u16 debounce; - u16 debounce_en; - u16 ctrl; - u16 wkup_en; - u16 leveldetect0; - u16 leveldetect1; - u16 risingdetect; - u16 fallingdetect; - u16 irqctrl; - u16 edgectrl1; - u16 edgectrl2; - u16 pinctrl; - - bool irqenable_inv; -}; - -struct omap_gpio_platform_data { - int bank_type; - int bank_width; /* GPIO bank width */ - int bank_stride; /* Only needed for omap1 MPUIO */ - bool dbck_flag; /* dbck required or not - True for OMAP3&4 */ - bool loses_context; /* whether the bank would ever lose context */ - bool is_mpuio; /* whether the bank is of type MPUIO */ - u32 non_wakeup_gpios; - - struct omap_gpio_reg_offs *regs; - - /* Return context loss count due to PM states changing */ - int (*get_context_loss_count)(struct device *dev); -}; - -extern void omap2_gpio_prepare_for_idle(int off_mode); -extern void omap2_gpio_resume_after_idle(void); -extern void omap_set_gpio_debounce(int gpio, int enable); -extern void omap_set_gpio_debounce_time(int gpio, int enable); -/*-------------------------------------------------------------------------*/ - -/* - * Wrappers for "new style" GPIO calls, using the new infrastructure - * which lets us plug in FPGA, I2C, and other implementations. - * - * The original OMAP-specific calls should eventually be removed. - */ - -#include <linux/errno.h> -#include <asm-generic/gpio.h> - -#endif diff --git a/arch/arm/plat-omap/include/plat/gpmc-smc91x.h b/arch/arm/plat-omap/include/plat/gpmc-smc91x.h deleted file mode 100644 index b64fbee4d567..000000000000 --- a/arch/arm/plat-omap/include/plat/gpmc-smc91x.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/gpmc-smc91x.h - * - * Copyright (C) 2009 Nokia Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_OMAP_GPMC_SMC91X_H__ - -#define GPMC_TIMINGS_SMC91C96 (1 << 4) -#define GPMC_MUX_ADD_DATA (1 << 5) /* GPMC_CONFIG1_MUXADDDATA */ -#define GPMC_READ_MON (1 << 6) /* GPMC_CONFIG1_WAIT_READ_MON */ -#define GPMC_WRITE_MON (1 << 7) /* GPMC_CONFIG1_WAIT_WRITE_MON */ - -struct omap_smc91x_platform_data { - int cs; - int gpio_irq; - int gpio_pwrdwn; - int gpio_reset; - int wait_pin; /* Optional GPMC_CONFIG1_WAITPINSELECT */ - u32 flags; - int (*retime)(void); -}; - -#if defined(CONFIG_SMC91X) || \ - defined(CONFIG_SMC91X_MODULE) - -extern void gpmc_smc91x_init(struct omap_smc91x_platform_data *d); - -#else - -#define board_smc91x_data NULL - -static inline void gpmc_smc91x_init(struct omap_smc91x_platform_data *d) -{ -} - -#endif -#endif diff --git a/arch/arm/plat-omap/include/plat/gpmc-smsc911x.h b/arch/arm/plat-omap/include/plat/gpmc-smsc911x.h deleted file mode 100644 index ea6c9c88c725..000000000000 --- a/arch/arm/plat-omap/include/plat/gpmc-smsc911x.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * arch/arm/plat-omap/include/plat/gpmc-smsc911x.h - * - * Copyright (C) 2009 Li-Pro.Net - * Stephan Linz <linz@li-pro.net> - * - * Modified from arch/arm/plat-omap/include/plat/gpmc-smc91x.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_OMAP_GPMC_SMSC911X_H__ - -struct omap_smsc911x_platform_data { - int id; - int cs; - int gpio_irq; - int gpio_reset; - u32 flags; -}; - -#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) - -extern void gpmc_smsc911x_init(struct omap_smsc911x_platform_data *d); - -#else - -static inline void gpmc_smsc911x_init(struct omap_smsc911x_platform_data *d) -{ -} - -#endif -#endif diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h index f37764a36072..2e6e2597178c 100644 --- a/arch/arm/plat-omap/include/plat/gpmc.h +++ b/arch/arm/plat-omap/include/plat/gpmc.h @@ -133,6 +133,25 @@ struct gpmc_timings { u16 wr_data_mux_bus; /* WRDATAONADMUXBUS */ }; +struct gpmc_nand_regs { + void __iomem *gpmc_status; + void __iomem *gpmc_nand_command; + void __iomem *gpmc_nand_address; + void __iomem *gpmc_nand_data; + void __iomem *gpmc_prefetch_config1; + void __iomem *gpmc_prefetch_config2; + void __iomem *gpmc_prefetch_control; + void __iomem *gpmc_prefetch_status; + void __iomem *gpmc_ecc_config; + void __iomem *gpmc_ecc_control; + void __iomem *gpmc_ecc_size_config; + void __iomem *gpmc_ecc1_result; + void __iomem *gpmc_bch_result0; +}; + +extern void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs); +extern int gpmc_get_client_irq(unsigned irq_config); + extern unsigned int gpmc_ns_to_ticks(unsigned int time_ns); extern unsigned int gpmc_ps_to_ticks(unsigned int time_ps); extern unsigned int gpmc_ticks_to_ns(unsigned int ticks); diff --git a/arch/arm/plat-omap/include/plat/hardware.h b/arch/arm/plat-omap/include/plat/hardware.h deleted file mode 100644 index ddbde38e1e33..000000000000 --- a/arch/arm/plat-omap/include/plat/hardware.h +++ /dev/null @@ -1,293 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/hardware.h - * - * Hardware definitions for TI OMAP processors and boards - * - * NOTE: Please put device driver specific defines into a separate header - * file for each driver. - * - * Copyright (C) 2001 RidgeRun, Inc. - * Author: RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com> - * - * Reorganized for Linux-2.6 by Tony Lindgren <tony@atomide.com> - * and Dirk Behme <dirk.behme@de.bosch.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_OMAP_HARDWARE_H -#define __ASM_ARCH_OMAP_HARDWARE_H - -#include <asm/sizes.h> -#ifndef __ASSEMBLER__ -#include <asm/types.h> -#include <plat/cpu.h> -#endif -#include <plat/serial.h> - -/* - * --------------------------------------------------------------------------- - * Common definitions for all OMAP processors - * NOTE: Put all processor or board specific parts to the special header - * files. - * --------------------------------------------------------------------------- - */ - -/* - * ---------------------------------------------------------------------------- - * Timers - * ---------------------------------------------------------------------------- - */ -#define OMAP_MPU_TIMER1_BASE (0xfffec500) -#define OMAP_MPU_TIMER2_BASE (0xfffec600) -#define OMAP_MPU_TIMER3_BASE (0xfffec700) -#define MPU_TIMER_FREE (1 << 6) -#define MPU_TIMER_CLOCK_ENABLE (1 << 5) -#define MPU_TIMER_AR (1 << 1) -#define MPU_TIMER_ST (1 << 0) - -/* - * ---------------------------------------------------------------------------- - * Clocks - * ---------------------------------------------------------------------------- - */ -#define CLKGEN_REG_BASE (0xfffece00) -#define ARM_CKCTL (CLKGEN_REG_BASE + 0x0) -#define ARM_IDLECT1 (CLKGEN_REG_BASE + 0x4) -#define ARM_IDLECT2 (CLKGEN_REG_BASE + 0x8) -#define ARM_EWUPCT (CLKGEN_REG_BASE + 0xC) -#define ARM_RSTCT1 (CLKGEN_REG_BASE + 0x10) -#define ARM_RSTCT2 (CLKGEN_REG_BASE + 0x14) -#define ARM_SYSST (CLKGEN_REG_BASE + 0x18) -#define ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24) - -#define CK_RATEF 1 -#define CK_IDLEF 2 -#define CK_ENABLEF 4 -#define CK_SELECTF 8 -#define SETARM_IDLE_SHIFT - -/* DPLL control registers */ -#define DPLL_CTL (0xfffecf00) - -/* DSP clock control. Must use __raw_readw() and __raw_writew() with these */ -#define DSP_CONFIG_REG_BASE IOMEM(0xe1008000) -#define DSP_CKCTL (DSP_CONFIG_REG_BASE + 0x0) -#define DSP_IDLECT1 (DSP_CONFIG_REG_BASE + 0x4) -#define DSP_IDLECT2 (DSP_CONFIG_REG_BASE + 0x8) -#define DSP_RSTCT2 (DSP_CONFIG_REG_BASE + 0x14) - -/* - * --------------------------------------------------------------------------- - * UPLD - * --------------------------------------------------------------------------- - */ -#define ULPD_REG_BASE (0xfffe0800) -#define ULPD_IT_STATUS (ULPD_REG_BASE + 0x14) -#define ULPD_SETUP_ANALOG_CELL_3 (ULPD_REG_BASE + 0x24) -#define ULPD_CLOCK_CTRL (ULPD_REG_BASE + 0x30) -# define DIS_USB_PVCI_CLK (1 << 5) /* no USB/FAC synch */ -# define USB_MCLK_EN (1 << 4) /* enable W4_USB_CLKO */ -#define ULPD_SOFT_REQ (ULPD_REG_BASE + 0x34) -# define SOFT_UDC_REQ (1 << 4) -# define SOFT_USB_CLK_REQ (1 << 3) -# define SOFT_DPLL_REQ (1 << 0) -#define ULPD_DPLL_CTRL (ULPD_REG_BASE + 0x3c) -#define ULPD_STATUS_REQ (ULPD_REG_BASE + 0x40) -#define ULPD_APLL_CTRL (ULPD_REG_BASE + 0x4c) -#define ULPD_POWER_CTRL (ULPD_REG_BASE + 0x50) -#define ULPD_SOFT_DISABLE_REQ_REG (ULPD_REG_BASE + 0x68) -# define DIS_MMC2_DPLL_REQ (1 << 11) -# define DIS_MMC1_DPLL_REQ (1 << 10) -# define DIS_UART3_DPLL_REQ (1 << 9) -# define DIS_UART2_DPLL_REQ (1 << 8) -# define DIS_UART1_DPLL_REQ (1 << 7) -# define DIS_USB_HOST_DPLL_REQ (1 << 6) -#define ULPD_SDW_CLK_DIV_CTRL_SEL (ULPD_REG_BASE + 0x74) -#define ULPD_CAM_CLK_CTRL (ULPD_REG_BASE + 0x7c) - -/* - * --------------------------------------------------------------------------- - * Watchdog timer - * --------------------------------------------------------------------------- - */ - -/* Watchdog timer within the OMAP3.2 gigacell */ -#define OMAP_MPU_WATCHDOG_BASE (0xfffec800) -#define OMAP_WDT_TIMER (OMAP_MPU_WATCHDOG_BASE + 0x0) -#define OMAP_WDT_LOAD_TIM (OMAP_MPU_WATCHDOG_BASE + 0x4) -#define OMAP_WDT_READ_TIM (OMAP_MPU_WATCHDOG_BASE + 0x4) -#define OMAP_WDT_TIMER_MODE (OMAP_MPU_WATCHDOG_BASE + 0x8) - -/* - * --------------------------------------------------------------------------- - * Interrupts - * --------------------------------------------------------------------------- - */ -#ifdef CONFIG_ARCH_OMAP1 - -/* - * XXX: These probably want to be moved to arch/arm/mach-omap/omap1/irq.c - * or something similar.. -- PFM. - */ - -#define OMAP_IH1_BASE 0xfffecb00 -#define OMAP_IH2_BASE 0xfffe0000 - -#define OMAP_IH1_ITR (OMAP_IH1_BASE + 0x00) -#define OMAP_IH1_MIR (OMAP_IH1_BASE + 0x04) -#define OMAP_IH1_SIR_IRQ (OMAP_IH1_BASE + 0x10) -#define OMAP_IH1_SIR_FIQ (OMAP_IH1_BASE + 0x14) -#define OMAP_IH1_CONTROL (OMAP_IH1_BASE + 0x18) -#define OMAP_IH1_ILR0 (OMAP_IH1_BASE + 0x1c) -#define OMAP_IH1_ISR (OMAP_IH1_BASE + 0x9c) - -#define OMAP_IH2_ITR (OMAP_IH2_BASE + 0x00) -#define OMAP_IH2_MIR (OMAP_IH2_BASE + 0x04) -#define OMAP_IH2_SIR_IRQ (OMAP_IH2_BASE + 0x10) -#define OMAP_IH2_SIR_FIQ (OMAP_IH2_BASE + 0x14) -#define OMAP_IH2_CONTROL (OMAP_IH2_BASE + 0x18) -#define OMAP_IH2_ILR0 (OMAP_IH2_BASE + 0x1c) -#define OMAP_IH2_ISR (OMAP_IH2_BASE + 0x9c) - -#define IRQ_ITR_REG_OFFSET 0x00 -#define IRQ_MIR_REG_OFFSET 0x04 -#define IRQ_SIR_IRQ_REG_OFFSET 0x10 -#define IRQ_SIR_FIQ_REG_OFFSET 0x14 -#define IRQ_CONTROL_REG_OFFSET 0x18 -#define IRQ_ISR_REG_OFFSET 0x9c -#define IRQ_ILR0_REG_OFFSET 0x1c -#define IRQ_GMR_REG_OFFSET 0xa0 - -#endif - -/* - * ---------------------------------------------------------------------------- - * System control registers - * ---------------------------------------------------------------------------- - */ -#define MOD_CONF_CTRL_0 0xfffe1080 -#define MOD_CONF_CTRL_1 0xfffe1110 - -/* - * ---------------------------------------------------------------------------- - * Pin multiplexing registers - * ---------------------------------------------------------------------------- - */ -#define FUNC_MUX_CTRL_0 0xfffe1000 -#define FUNC_MUX_CTRL_1 0xfffe1004 -#define FUNC_MUX_CTRL_2 0xfffe1008 -#define COMP_MODE_CTRL_0 0xfffe100c -#define FUNC_MUX_CTRL_3 0xfffe1010 -#define FUNC_MUX_CTRL_4 0xfffe1014 -#define FUNC_MUX_CTRL_5 0xfffe1018 -#define FUNC_MUX_CTRL_6 0xfffe101C -#define FUNC_MUX_CTRL_7 0xfffe1020 -#define FUNC_MUX_CTRL_8 0xfffe1024 -#define FUNC_MUX_CTRL_9 0xfffe1028 -#define FUNC_MUX_CTRL_A 0xfffe102C -#define FUNC_MUX_CTRL_B 0xfffe1030 -#define FUNC_MUX_CTRL_C 0xfffe1034 -#define FUNC_MUX_CTRL_D 0xfffe1038 -#define PULL_DWN_CTRL_0 0xfffe1040 -#define PULL_DWN_CTRL_1 0xfffe1044 -#define PULL_DWN_CTRL_2 0xfffe1048 -#define PULL_DWN_CTRL_3 0xfffe104c -#define PULL_DWN_CTRL_4 0xfffe10ac - -/* OMAP-1610 specific multiplexing registers */ -#define FUNC_MUX_CTRL_E 0xfffe1090 -#define FUNC_MUX_CTRL_F 0xfffe1094 -#define FUNC_MUX_CTRL_10 0xfffe1098 -#define FUNC_MUX_CTRL_11 0xfffe109c -#define FUNC_MUX_CTRL_12 0xfffe10a0 -#define PU_PD_SEL_0 0xfffe10b4 -#define PU_PD_SEL_1 0xfffe10b8 -#define PU_PD_SEL_2 0xfffe10bc -#define PU_PD_SEL_3 0xfffe10c0 -#define PU_PD_SEL_4 0xfffe10c4 - -/* Timer32K for 1610 and 1710*/ -#define OMAP_TIMER32K_BASE 0xFFFBC400 - -/* - * --------------------------------------------------------------------------- - * TIPB bus interface - * --------------------------------------------------------------------------- - */ -#define TIPB_PUBLIC_CNTL_BASE 0xfffed300 -#define MPU_PUBLIC_TIPB_CNTL (TIPB_PUBLIC_CNTL_BASE + 0x8) -#define TIPB_PRIVATE_CNTL_BASE 0xfffeca00 -#define MPU_PRIVATE_TIPB_CNTL (TIPB_PRIVATE_CNTL_BASE + 0x8) - -/* - * ---------------------------------------------------------------------------- - * MPUI interface - * ---------------------------------------------------------------------------- - */ -#define MPUI_BASE (0xfffec900) -#define MPUI_CTRL (MPUI_BASE + 0x0) -#define MPUI_DEBUG_ADDR (MPUI_BASE + 0x4) -#define MPUI_DEBUG_DATA (MPUI_BASE + 0x8) -#define MPUI_DEBUG_FLAG (MPUI_BASE + 0xc) -#define MPUI_STATUS_REG (MPUI_BASE + 0x10) -#define MPUI_DSP_STATUS (MPUI_BASE + 0x14) -#define MPUI_DSP_BOOT_CONFIG (MPUI_BASE + 0x18) -#define MPUI_DSP_API_CONFIG (MPUI_BASE + 0x1c) - -/* - * ---------------------------------------------------------------------------- - * LED Pulse Generator - * ---------------------------------------------------------------------------- - */ -#define OMAP_LPG1_BASE 0xfffbd000 -#define OMAP_LPG2_BASE 0xfffbd800 -#define OMAP_LPG1_LCR (OMAP_LPG1_BASE + 0x00) -#define OMAP_LPG1_PMR (OMAP_LPG1_BASE + 0x04) -#define OMAP_LPG2_LCR (OMAP_LPG2_BASE + 0x00) -#define OMAP_LPG2_PMR (OMAP_LPG2_BASE + 0x04) - -/* - * ---------------------------------------------------------------------------- - * Pulse-Width Light - * ---------------------------------------------------------------------------- - */ -#define OMAP_PWL_BASE 0xfffb5800 -#define OMAP_PWL_ENABLE (OMAP_PWL_BASE + 0x00) -#define OMAP_PWL_CLK_ENABLE (OMAP_PWL_BASE + 0x04) - -/* - * --------------------------------------------------------------------------- - * Processor specific defines - * --------------------------------------------------------------------------- - */ - -#include <plat/omap7xx.h> -#include <plat/omap1510.h> -#include <plat/omap16xx.h> -#include <plat/omap24xx.h> -#include <plat/omap34xx.h> -#include <plat/omap44xx.h> -#include <plat/ti81xx.h> -#include <plat/am33xx.h> -#include <plat/omap54xx.h> - -#endif /* __ASM_ARCH_OMAP_HARDWARE_H */ diff --git a/arch/arm/plat-omap/include/plat/hdq1w.h b/arch/arm/plat-omap/include/plat/hdq1w.h deleted file mode 100644 index 0c1efc846d8d..000000000000 --- a/arch/arm/plat-omap/include/plat/hdq1w.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * Shared macros and function prototypes for the HDQ1W/1-wire IP block - * - * Copyright (C) 2012 Texas Instruments, Inc. - * Paul Walmsley - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - */ -#ifndef ARCH_ARM_MACH_OMAP2_HDQ1W_H -#define ARCH_ARM_MACH_OMAP2_HDQ1W_H - -#include <plat/omap_hwmod.h> - -/* - * XXX A future cleanup patch should modify - * drivers/w1/masters/omap_hdq.c to use these macros - */ -#define HDQ_CTRL_STATUS_OFFSET 0x0c -#define HDQ_CTRL_STATUS_CLOCKENABLE_SHIFT 5 - - -extern int omap_hdq1w_reset(struct omap_hwmod *oh); - -#endif diff --git a/arch/arm/plat-omap/include/plat/irda.h b/arch/arm/plat-omap/include/plat/irda.h deleted file mode 100644 index 40f60339d1c6..000000000000 --- a/arch/arm/plat-omap/include/plat/irda.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/irda.h - * - * Copyright (C) 2005-2006 Komal Shah <komal_shah802003@yahoo.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef ASMARM_ARCH_IRDA_H -#define ASMARM_ARCH_IRDA_H - -/* board specific transceiver capabilities */ - -#define IR_SEL 1 /* Selects IrDA */ -#define IR_SIRMODE 2 -#define IR_FIRMODE 4 -#define IR_MIRMODE 8 - -struct omap_irda_config { - int transceiver_cap; - int (*transceiver_mode)(struct device *dev, int mode); - int (*select_irda)(struct device *dev, int state); - int rx_channel; - int tx_channel; - unsigned long dest_start; - unsigned long src_start; - int tx_trigger; - int rx_trigger; - int mode; -}; - -#endif diff --git a/arch/arm/plat-omap/include/plat/irqs-44xx.h b/arch/arm/plat-omap/include/plat/irqs-44xx.h deleted file mode 100644 index 518322c80116..000000000000 --- a/arch/arm/plat-omap/include/plat/irqs-44xx.h +++ /dev/null @@ -1,144 +0,0 @@ -/* - * OMAP4 Interrupt lines definitions - * - * Copyright (C) 2009-2010 Texas Instruments, Inc. - * - * Santosh Shilimkar (santosh.shilimkar@ti.com) - * Benoit Cousson (b-cousson@ti.com) - * - * This file is automatically generated from the OMAP hardware databases. - * We respectfully ask that any modifications to this file be coordinated - * with the public linux-omap@vger.kernel.org mailing list and the - * authors above to ensure that the autogeneration scripts are kept - * up-to-date with the file contents. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ARCH_ARM_MACH_OMAP2_OMAP44XX_IRQS_H -#define __ARCH_ARM_MACH_OMAP2_OMAP44XX_IRQS_H - -/* OMAP44XX IRQs numbers definitions */ -#define OMAP44XX_IRQ_LOCALTIMER 29 -#define OMAP44XX_IRQ_LOCALWDT 30 - -#define OMAP44XX_IRQ_GIC_START 32 - -#define OMAP44XX_IRQ_PL310 (0 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_CTI0 (1 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_CTI1 (2 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_ELM (4 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SYS_1N (7 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SECURITY_EVENTS (8 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_L3_DBG (9 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_L3_APP (10 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_PRCM (11 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SDMA_0 (12 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SDMA_1 (13 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SDMA_2 (14 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SDMA_3 (15 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_MCBSP4 (16 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_MCBSP1 (17 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SR_MCU (18 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SR_CORE (19 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPMC (20 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GFX (21 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_MCBSP2 (22 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_MCBSP3 (23 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_ISS_5 (24 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_DSS_DISPC (25 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_MAIL_U0 (26 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_C2C_SSCM_0 (27 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_TESLA_MMU (28 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPIO1 (29 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPIO2 (30 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPIO3 (31 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPIO4 (32 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPIO5 (33 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPIO6 (34 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_USIM (35 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_WDT3 (36 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPT1 (37 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPT2 (38 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPT3 (39 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPT4 (40 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPT5 (41 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPT6 (42 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPT7 (43 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPT8 (44 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPT9 (45 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPT10 (46 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPT11 (47 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SPI4 (48 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SHA1_S (49 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_FPKA_SINTREQUEST_S (50 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SHA1_P (51 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_RNG (52 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_DSS_DSI1 (53 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_I2C1 (56 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_I2C2 (57 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_HDQ (58 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_MMC5 (59 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_I2C3 (61 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_I2C4 (62 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_AES2_S (63 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_AES2_P (64 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SPI1 (65 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SPI2 (66 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_HSI_P1 (67 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_HSI_P2 (68 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_FDIF_3 (69 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_UART4 (70 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_HSI_DMA (71 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_UART1 (72 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_UART2 (73 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_UART3 (74 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_PBIAS (75 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_OHCI (76 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_EHCI (77 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_TLL (78 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_AES1_S (79 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_WDT2 (80 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_DES_S (81 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_DES_P (82 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_MMC1 (83 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_DSS_DSI2 (84 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_AES1_P (85 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_MMC2 (86 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_MPU_ICR (87 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_C2C_SSCM_1 (88 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_FSUSB (89 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_FSUSB_SMI (90 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SPI3 (91 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_HS_USB_MC_N (92 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_HS_USB_DMA_N (93 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_MMC3 (94 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_GPT12 (95 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_MMC4 (96 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SLIMBUS1 (97 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SLIMBUS2 (98 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_ABE (99 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_DUCATI_MMU (100 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_DSS_HDMI (101 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SR_IVA (102 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_IVA_HD_POSYNCITRPEND_1 (103 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_IVA_HD_POSYNCITRPEND_0 (104 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_IVA_HD_POMBINTRPEND_0 (107 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_MCASP1_AR (108 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_MCASP1_AX (109 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_EMIF4_1 (110 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_EMIF4_2 (111 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_MCPDM (112 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_DMM (113 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_DMIC (114 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_CDMA_0 (115 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_CDMA_1 (116 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_CDMA_2 (117 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_CDMA_3 (118 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_SYS_2N (119 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_KBD_CTL (120 + OMAP44XX_IRQ_GIC_START) -#define OMAP44XX_IRQ_UNIPRO1 (124 + OMAP44XX_IRQ_GIC_START) - -#endif diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h deleted file mode 100644 index 37bbbbb981b2..000000000000 --- a/arch/arm/plat-omap/include/plat/irqs.h +++ /dev/null @@ -1,453 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/irqs.h - * - * Copyright (C) Greg Lonnon 2001 - * Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com> - * - * Copyright (C) 2009 Texas Instruments - * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * NOTE: The interrupt vectors for the OMAP-1509, OMAP-1510, and OMAP-1610 - * are different. - */ - -#ifndef __ASM_ARCH_OMAP15XX_IRQS_H -#define __ASM_ARCH_OMAP15XX_IRQS_H - -/* All OMAP4 specific defines are moved to irqs-44xx.h */ -#include "irqs-44xx.h" - -/* - * IRQ numbers for interrupt handler 1 - * - * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below - * - */ -#define INT_CAMERA 1 -#define INT_FIQ 3 -#define INT_RTDX 6 -#define INT_DSP_MMU_ABORT 7 -#define INT_HOST 8 -#define INT_ABORT 9 -#define INT_BRIDGE_PRIV 13 -#define INT_GPIO_BANK1 14 -#define INT_UART3 15 -#define INT_TIMER3 16 -#define INT_DMA_CH0_6 19 -#define INT_DMA_CH1_7 20 -#define INT_DMA_CH2_8 21 -#define INT_DMA_CH3 22 -#define INT_DMA_CH4 23 -#define INT_DMA_CH5 24 -#define INT_DMA_LCD 25 -#define INT_TIMER1 26 -#define INT_WD_TIMER 27 -#define INT_BRIDGE_PUB 28 -#define INT_TIMER2 30 -#define INT_LCD_CTRL 31 - -/* - * OMAP-1510 specific IRQ numbers for interrupt handler 1 - */ -#define INT_1510_IH2_IRQ 0 -#define INT_1510_RES2 2 -#define INT_1510_SPI_TX 4 -#define INT_1510_SPI_RX 5 -#define INT_1510_DSP_MAILBOX1 10 -#define INT_1510_DSP_MAILBOX2 11 -#define INT_1510_RES12 12 -#define INT_1510_LB_MMU 17 -#define INT_1510_RES18 18 -#define INT_1510_LOCAL_BUS 29 - -/* - * OMAP-1610 specific IRQ numbers for interrupt handler 1 - */ -#define INT_1610_IH2_IRQ INT_1510_IH2_IRQ -#define INT_1610_IH2_FIQ 2 -#define INT_1610_McBSP2_TX 4 -#define INT_1610_McBSP2_RX 5 -#define INT_1610_DSP_MAILBOX1 10 -#define INT_1610_DSP_MAILBOX2 11 -#define INT_1610_LCD_LINE 12 -#define INT_1610_GPTIMER1 17 -#define INT_1610_GPTIMER2 18 -#define INT_1610_SSR_FIFO_0 29 - -/* - * OMAP-7xx specific IRQ numbers for interrupt handler 1 - */ -#define INT_7XX_IH2_FIQ 0 -#define INT_7XX_IH2_IRQ 1 -#define INT_7XX_USB_NON_ISO 2 -#define INT_7XX_USB_ISO 3 -#define INT_7XX_ICR 4 -#define INT_7XX_EAC 5 -#define INT_7XX_GPIO_BANK1 6 -#define INT_7XX_GPIO_BANK2 7 -#define INT_7XX_GPIO_BANK3 8 -#define INT_7XX_McBSP2TX 10 -#define INT_7XX_McBSP2RX 11 -#define INT_7XX_McBSP2RX_OVF 12 -#define INT_7XX_LCD_LINE 14 -#define INT_7XX_GSM_PROTECT 15 -#define INT_7XX_TIMER3 16 -#define INT_7XX_GPIO_BANK5 17 -#define INT_7XX_GPIO_BANK6 18 -#define INT_7XX_SPGIO_WR 29 - -/* - * IRQ numbers for interrupt handler 2 - * - * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below - */ -#define IH2_BASE 32 - -#define INT_KEYBOARD (1 + IH2_BASE) -#define INT_uWireTX (2 + IH2_BASE) -#define INT_uWireRX (3 + IH2_BASE) -#define INT_I2C (4 + IH2_BASE) -#define INT_MPUIO (5 + IH2_BASE) -#define INT_USB_HHC_1 (6 + IH2_BASE) -#define INT_McBSP3TX (10 + IH2_BASE) -#define INT_McBSP3RX (11 + IH2_BASE) -#define INT_McBSP1TX (12 + IH2_BASE) -#define INT_McBSP1RX (13 + IH2_BASE) -#define INT_UART1 (14 + IH2_BASE) -#define INT_UART2 (15 + IH2_BASE) -#define INT_BT_MCSI1TX (16 + IH2_BASE) -#define INT_BT_MCSI1RX (17 + IH2_BASE) -#define INT_SOSSI_MATCH (19 + IH2_BASE) -#define INT_USB_W2FC (20 + IH2_BASE) -#define INT_1WIRE (21 + IH2_BASE) -#define INT_OS_TIMER (22 + IH2_BASE) -#define INT_MMC (23 + IH2_BASE) -#define INT_GAUGE_32K (24 + IH2_BASE) -#define INT_RTC_TIMER (25 + IH2_BASE) -#define INT_RTC_ALARM (26 + IH2_BASE) -#define INT_MEM_STICK (27 + IH2_BASE) - -/* - * OMAP-1510 specific IRQ numbers for interrupt handler 2 - */ -#define INT_1510_DSP_MMU (28 + IH2_BASE) -#define INT_1510_COM_SPI_RO (31 + IH2_BASE) - -/* - * OMAP-1610 specific IRQ numbers for interrupt handler 2 - */ -#define INT_1610_FAC (0 + IH2_BASE) -#define INT_1610_USB_HHC_2 (7 + IH2_BASE) -#define INT_1610_USB_OTG (8 + IH2_BASE) -#define INT_1610_SoSSI (9 + IH2_BASE) -#define INT_1610_SoSSI_MATCH (19 + IH2_BASE) -#define INT_1610_DSP_MMU (28 + IH2_BASE) -#define INT_1610_McBSP2RX_OF (31 + IH2_BASE) -#define INT_1610_STI (32 + IH2_BASE) -#define INT_1610_STI_WAKEUP (33 + IH2_BASE) -#define INT_1610_GPTIMER3 (34 + IH2_BASE) -#define INT_1610_GPTIMER4 (35 + IH2_BASE) -#define INT_1610_GPTIMER5 (36 + IH2_BASE) -#define INT_1610_GPTIMER6 (37 + IH2_BASE) -#define INT_1610_GPTIMER7 (38 + IH2_BASE) -#define INT_1610_GPTIMER8 (39 + IH2_BASE) -#define INT_1610_GPIO_BANK2 (40 + IH2_BASE) -#define INT_1610_GPIO_BANK3 (41 + IH2_BASE) -#define INT_1610_MMC2 (42 + IH2_BASE) -#define INT_1610_CF (43 + IH2_BASE) -#define INT_1610_WAKE_UP_REQ (46 + IH2_BASE) -#define INT_1610_GPIO_BANK4 (48 + IH2_BASE) -#define INT_1610_SPI (49 + IH2_BASE) -#define INT_1610_DMA_CH6 (53 + IH2_BASE) -#define INT_1610_DMA_CH7 (54 + IH2_BASE) -#define INT_1610_DMA_CH8 (55 + IH2_BASE) -#define INT_1610_DMA_CH9 (56 + IH2_BASE) -#define INT_1610_DMA_CH10 (57 + IH2_BASE) -#define INT_1610_DMA_CH11 (58 + IH2_BASE) -#define INT_1610_DMA_CH12 (59 + IH2_BASE) -#define INT_1610_DMA_CH13 (60 + IH2_BASE) -#define INT_1610_DMA_CH14 (61 + IH2_BASE) -#define INT_1610_DMA_CH15 (62 + IH2_BASE) -#define INT_1610_NAND (63 + IH2_BASE) -#define INT_1610_SHA1MD5 (91 + IH2_BASE) - -/* - * OMAP-7xx specific IRQ numbers for interrupt handler 2 - */ -#define INT_7XX_HW_ERRORS (0 + IH2_BASE) -#define INT_7XX_NFIQ_PWR_FAIL (1 + IH2_BASE) -#define INT_7XX_CFCD (2 + IH2_BASE) -#define INT_7XX_CFIREQ (3 + IH2_BASE) -#define INT_7XX_I2C (4 + IH2_BASE) -#define INT_7XX_PCC (5 + IH2_BASE) -#define INT_7XX_MPU_EXT_NIRQ (6 + IH2_BASE) -#define INT_7XX_SPI_100K_1 (7 + IH2_BASE) -#define INT_7XX_SYREN_SPI (8 + IH2_BASE) -#define INT_7XX_VLYNQ (9 + IH2_BASE) -#define INT_7XX_GPIO_BANK4 (10 + IH2_BASE) -#define INT_7XX_McBSP1TX (11 + IH2_BASE) -#define INT_7XX_McBSP1RX (12 + IH2_BASE) -#define INT_7XX_McBSP1RX_OF (13 + IH2_BASE) -#define INT_7XX_UART_MODEM_IRDA_2 (14 + IH2_BASE) -#define INT_7XX_UART_MODEM_1 (15 + IH2_BASE) -#define INT_7XX_MCSI (16 + IH2_BASE) -#define INT_7XX_uWireTX (17 + IH2_BASE) -#define INT_7XX_uWireRX (18 + IH2_BASE) -#define INT_7XX_SMC_CD (19 + IH2_BASE) -#define INT_7XX_SMC_IREQ (20 + IH2_BASE) -#define INT_7XX_HDQ_1WIRE (21 + IH2_BASE) -#define INT_7XX_TIMER32K (22 + IH2_BASE) -#define INT_7XX_MMC_SDIO (23 + IH2_BASE) -#define INT_7XX_UPLD (24 + IH2_BASE) -#define INT_7XX_USB_HHC_1 (27 + IH2_BASE) -#define INT_7XX_USB_HHC_2 (28 + IH2_BASE) -#define INT_7XX_USB_GENI (29 + IH2_BASE) -#define INT_7XX_USB_OTG (30 + IH2_BASE) -#define INT_7XX_CAMERA_IF (31 + IH2_BASE) -#define INT_7XX_RNG (32 + IH2_BASE) -#define INT_7XX_DUAL_MODE_TIMER (33 + IH2_BASE) -#define INT_7XX_DBB_RF_EN (34 + IH2_BASE) -#define INT_7XX_MPUIO_KEYPAD (35 + IH2_BASE) -#define INT_7XX_SHA1_MD5 (36 + IH2_BASE) -#define INT_7XX_SPI_100K_2 (37 + IH2_BASE) -#define INT_7XX_RNG_IDLE (38 + IH2_BASE) -#define INT_7XX_MPUIO (39 + IH2_BASE) -#define INT_7XX_LLPC_LCD_CTRL_CAN_BE_OFF (40 + IH2_BASE) -#define INT_7XX_LLPC_OE_FALLING (41 + IH2_BASE) -#define INT_7XX_LLPC_OE_RISING (42 + IH2_BASE) -#define INT_7XX_LLPC_VSYNC (43 + IH2_BASE) -#define INT_7XX_WAKE_UP_REQ (46 + IH2_BASE) -#define INT_7XX_DMA_CH6 (53 + IH2_BASE) -#define INT_7XX_DMA_CH7 (54 + IH2_BASE) -#define INT_7XX_DMA_CH8 (55 + IH2_BASE) -#define INT_7XX_DMA_CH9 (56 + IH2_BASE) -#define INT_7XX_DMA_CH10 (57 + IH2_BASE) -#define INT_7XX_DMA_CH11 (58 + IH2_BASE) -#define INT_7XX_DMA_CH12 (59 + IH2_BASE) -#define INT_7XX_DMA_CH13 (60 + IH2_BASE) -#define INT_7XX_DMA_CH14 (61 + IH2_BASE) -#define INT_7XX_DMA_CH15 (62 + IH2_BASE) -#define INT_7XX_NAND (63 + IH2_BASE) - -#define INT_24XX_SYS_NIRQ 7 -#define INT_24XX_SDMA_IRQ0 12 -#define INT_24XX_SDMA_IRQ1 13 -#define INT_24XX_SDMA_IRQ2 14 -#define INT_24XX_SDMA_IRQ3 15 -#define INT_24XX_CAM_IRQ 24 -#define INT_24XX_DSS_IRQ 25 -#define INT_24XX_MAIL_U0_MPU 26 -#define INT_24XX_DSP_UMA 27 -#define INT_24XX_DSP_MMU 28 -#define INT_24XX_GPIO_BANK1 29 -#define INT_24XX_GPIO_BANK2 30 -#define INT_24XX_GPIO_BANK3 31 -#define INT_24XX_GPIO_BANK4 32 -#define INT_24XX_GPIO_BANK5 33 -#define INT_24XX_MAIL_U3_MPU 34 -#define INT_24XX_GPTIMER1 37 -#define INT_24XX_GPTIMER2 38 -#define INT_24XX_GPTIMER3 39 -#define INT_24XX_GPTIMER4 40 -#define INT_24XX_GPTIMER5 41 -#define INT_24XX_GPTIMER6 42 -#define INT_24XX_GPTIMER7 43 -#define INT_24XX_GPTIMER8 44 -#define INT_24XX_GPTIMER9 45 -#define INT_24XX_GPTIMER10 46 -#define INT_24XX_GPTIMER11 47 -#define INT_24XX_GPTIMER12 48 -#define INT_24XX_SHA1MD5 51 -#define INT_24XX_MCBSP4_IRQ_TX 54 -#define INT_24XX_MCBSP4_IRQ_RX 55 -#define INT_24XX_I2C1_IRQ 56 -#define INT_24XX_I2C2_IRQ 57 -#define INT_24XX_HDQ_IRQ 58 -#define INT_24XX_MCBSP1_IRQ_TX 59 -#define INT_24XX_MCBSP1_IRQ_RX 60 -#define INT_24XX_MCBSP2_IRQ_TX 62 -#define INT_24XX_MCBSP2_IRQ_RX 63 -#define INT_24XX_SPI1_IRQ 65 -#define INT_24XX_SPI2_IRQ 66 -#define INT_24XX_UART1_IRQ 72 -#define INT_24XX_UART2_IRQ 73 -#define INT_24XX_UART3_IRQ 74 -#define INT_24XX_USB_IRQ_GEN 75 -#define INT_24XX_USB_IRQ_NISO 76 -#define INT_24XX_USB_IRQ_ISO 77 -#define INT_24XX_USB_IRQ_HGEN 78 -#define INT_24XX_USB_IRQ_HSOF 79 -#define INT_24XX_USB_IRQ_OTG 80 -#define INT_24XX_MCBSP5_IRQ_TX 81 -#define INT_24XX_MCBSP5_IRQ_RX 82 -#define INT_24XX_MMC_IRQ 83 -#define INT_24XX_MMC2_IRQ 86 -#define INT_24XX_MCBSP3_IRQ_TX 89 -#define INT_24XX_MCBSP3_IRQ_RX 90 -#define INT_24XX_SPI3_IRQ 91 - -#define INT_243X_MCBSP2_IRQ 16 -#define INT_243X_MCBSP3_IRQ 17 -#define INT_243X_MCBSP4_IRQ 18 -#define INT_243X_MCBSP5_IRQ 19 -#define INT_243X_MCBSP1_IRQ 64 -#define INT_243X_HS_USB_MC 92 -#define INT_243X_HS_USB_DMA 93 -#define INT_243X_CARKIT_IRQ 94 - -#define INT_34XX_BENCH_MPU_EMUL 3 -#define INT_34XX_ST_MCBSP2_IRQ 4 -#define INT_34XX_ST_MCBSP3_IRQ 5 -#define INT_34XX_SSM_ABORT_IRQ 6 -#define INT_34XX_SYS_NIRQ 7 -#define INT_34XX_D2D_FW_IRQ 8 -#define INT_34XX_L3_DBG_IRQ 9 -#define INT_34XX_L3_APP_IRQ 10 -#define INT_34XX_PRCM_MPU_IRQ 11 -#define INT_34XX_MCBSP1_IRQ 16 -#define INT_34XX_MCBSP2_IRQ 17 -#define INT_34XX_GPMC_IRQ 20 -#define INT_34XX_MCBSP3_IRQ 22 -#define INT_34XX_MCBSP4_IRQ 23 -#define INT_34XX_CAM_IRQ 24 -#define INT_34XX_MCBSP5_IRQ 27 -#define INT_34XX_GPIO_BANK1 29 -#define INT_34XX_GPIO_BANK2 30 -#define INT_34XX_GPIO_BANK3 31 -#define INT_34XX_GPIO_BANK4 32 -#define INT_34XX_GPIO_BANK5 33 -#define INT_34XX_GPIO_BANK6 34 -#define INT_34XX_USIM_IRQ 35 -#define INT_34XX_WDT3_IRQ 36 -#define INT_34XX_SPI4_IRQ 48 -#define INT_34XX_SHA1MD52_IRQ 49 -#define INT_34XX_FPKA_READY_IRQ 50 -#define INT_34XX_SHA1MD51_IRQ 51 -#define INT_34XX_RNG_IRQ 52 -#define INT_34XX_I2C3_IRQ 61 -#define INT_34XX_FPKA_ERROR_IRQ 64 -#define INT_34XX_PBIAS_IRQ 75 -#define INT_34XX_OHCI_IRQ 76 -#define INT_34XX_EHCI_IRQ 77 -#define INT_34XX_TLL_IRQ 78 -#define INT_34XX_PARTHASH_IRQ 79 -#define INT_34XX_MMC3_IRQ 94 -#define INT_34XX_GPT12_IRQ 95 - -#define INT_36XX_UART4_IRQ 80 - -#define INT_35XX_HECC0_IRQ 24 -#define INT_35XX_HECC1_IRQ 28 -#define INT_35XX_EMAC_C0_RXTHRESH_IRQ 67 -#define INT_35XX_EMAC_C0_RX_PULSE_IRQ 68 -#define INT_35XX_EMAC_C0_TX_PULSE_IRQ 69 -#define INT_35XX_EMAC_C0_MISC_PULSE_IRQ 70 -#define INT_35XX_USBOTG_IRQ 71 -#define INT_35XX_UART4_IRQ 84 -#define INT_35XX_CCDC_VD0_IRQ 88 -#define INT_35XX_CCDC_VD1_IRQ 92 -#define INT_35XX_CCDC_VD2_IRQ 93 - -/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730/850) and - * 16 MPUIO lines */ -#define OMAP_MAX_GPIO_LINES 192 -#define IH_GPIO_BASE (128 + IH2_BASE) -#define IH_MPUIO_BASE (OMAP_MAX_GPIO_LINES + IH_GPIO_BASE) -#define OMAP_IRQ_END (IH_MPUIO_BASE + 16) - -/* External FPGA handles interrupts on Innovator boards */ -#define OMAP_FPGA_IRQ_BASE (OMAP_IRQ_END) -#ifdef CONFIG_MACH_OMAP_INNOVATOR -#define OMAP_FPGA_NR_IRQS 24 -#else -#define OMAP_FPGA_NR_IRQS 0 -#endif -#define OMAP_FPGA_IRQ_END (OMAP_FPGA_IRQ_BASE + OMAP_FPGA_NR_IRQS) - -/* External TWL4030 can handle interrupts on 2430 and 34xx boards */ -#define TWL4030_IRQ_BASE (OMAP_FPGA_IRQ_END) -#ifdef CONFIG_TWL4030_CORE -#define TWL4030_BASE_NR_IRQS 8 -#define TWL4030_PWR_NR_IRQS 8 -#else -#define TWL4030_BASE_NR_IRQS 0 -#define TWL4030_PWR_NR_IRQS 0 -#endif -#define TWL4030_IRQ_END (TWL4030_IRQ_BASE + TWL4030_BASE_NR_IRQS) -#define TWL4030_PWR_IRQ_BASE TWL4030_IRQ_END -#define TWL4030_PWR_IRQ_END (TWL4030_PWR_IRQ_BASE + TWL4030_PWR_NR_IRQS) - -/* External TWL4030 gpio interrupts are optional */ -#define TWL4030_GPIO_IRQ_BASE TWL4030_PWR_IRQ_END -#ifdef CONFIG_GPIO_TWL4030 -#define TWL4030_GPIO_NR_IRQS 18 -#else -#define TWL4030_GPIO_NR_IRQS 0 -#endif -#define TWL4030_GPIO_IRQ_END (TWL4030_GPIO_IRQ_BASE + TWL4030_GPIO_NR_IRQS) - -#define TWL6030_IRQ_BASE (OMAP_FPGA_IRQ_END) -#ifdef CONFIG_TWL4030_CORE -#define TWL6030_BASE_NR_IRQS 20 -#else -#define TWL6030_BASE_NR_IRQS 0 -#endif -#define TWL6030_IRQ_END (TWL6030_IRQ_BASE + TWL6030_BASE_NR_IRQS) - -#define TWL6040_CODEC_IRQ_BASE TWL6030_IRQ_END -#ifdef CONFIG_TWL6040_CODEC -#define TWL6040_CODEC_NR_IRQS 6 -#else -#define TWL6040_CODEC_NR_IRQS 0 -#endif -#define TWL6040_CODEC_IRQ_END (TWL6040_CODEC_IRQ_BASE + TWL6040_CODEC_NR_IRQS) - -/* Total number of interrupts depends on the enabled blocks above */ -#if (TWL4030_GPIO_IRQ_END > TWL6040_CODEC_IRQ_END) -#define TWL_IRQ_END TWL4030_GPIO_IRQ_END -#else -#define TWL_IRQ_END TWL6040_CODEC_IRQ_END -#endif - -/* GPMC related */ -#define OMAP_GPMC_IRQ_BASE (TWL_IRQ_END) -#define OMAP_GPMC_NR_IRQS 8 -#define OMAP_GPMC_IRQ_END (OMAP_GPMC_IRQ_BASE + OMAP_GPMC_NR_IRQS) - -/* PRCM IRQ handler */ -#ifdef CONFIG_ARCH_OMAP2PLUS -#define OMAP_PRCM_IRQ_BASE (OMAP_GPMC_IRQ_END) -#define OMAP_PRCM_NR_IRQS 64 -#define OMAP_PRCM_IRQ_END (OMAP_PRCM_IRQ_BASE + OMAP_PRCM_NR_IRQS) -#else -#define OMAP_PRCM_IRQ_END OMAP_GPMC_IRQ_END -#endif - -#define NR_IRQS OMAP_PRCM_IRQ_END - -#define OMAP_IRQ_BIT(irq) (1 << ((irq) % 32)) - -#define INTCPS_NR_MIR_REGS 3 -#define INTCPS_NR_IRQS 96 - -#include <mach/hardware.h> - -#ifdef CONFIG_FIQ -#define FIQ_START 1024 -#endif - -#endif diff --git a/arch/arm/plat-omap/include/plat/keypad.h b/arch/arm/plat-omap/include/plat/keypad.h deleted file mode 100644 index a6b21eddb212..000000000000 --- a/arch/arm/plat-omap/include/plat/keypad.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/keypad.h - * - * Copyright (C) 2006 Komal Shah <komal_shah802003@yahoo.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef ASMARM_ARCH_KEYPAD_H -#define ASMARM_ARCH_KEYPAD_H - -#ifndef CONFIG_ARCH_OMAP1 -#warning Please update the board to use matrix-keypad driver -#define omap_readw(reg) 0 -#define omap_writew(val, reg) do {} while (0) -#endif -#include <linux/input/matrix_keypad.h> - -struct omap_kp_platform_data { - int rows; - int cols; - const struct matrix_keymap_data *keymap_data; - bool rep; - unsigned long delay; - bool dbounce; - /* specific to OMAP242x*/ - unsigned int *row_gpios; - unsigned int *col_gpios; -}; - -/* Group (0..3) -- when multiple keys are pressed, only the - * keys pressed in the same group are considered as pressed. This is - * in order to workaround certain crappy HW designs that produce ghost - * keypresses. Two free bits, not used by neither row/col nor keynum, - * must be available for use as group bits. The below GROUP_SHIFT - * macro definition is based on some prior knowledge of the - * matrix_keypad defined KEY() macro internals. - */ -#define GROUP_SHIFT 14 -#define GROUP_0 (0 << GROUP_SHIFT) -#define GROUP_1 (1 << GROUP_SHIFT) -#define GROUP_2 (2 << GROUP_SHIFT) -#define GROUP_3 (3 << GROUP_SHIFT) -#define GROUP_MASK GROUP_3 -#if KEY_MAX & GROUP_MASK -#error Group bits in conflict with keynum bits -#endif - - -#endif - diff --git a/arch/arm/plat-omap/include/plat/l3_2xxx.h b/arch/arm/plat-omap/include/plat/l3_2xxx.h deleted file mode 100644 index b8b5641379b0..000000000000 --- a/arch/arm/plat-omap/include/plat/l3_2xxx.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * arch/arm/plat-omap/include/plat/l3_2xxx.h - L3 firewall definitions - * - * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ - * Sumit Semwal - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ -#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L3_2XXX_H -#define __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L3_2XXX_H - -/* L3 CONNIDs */ -/* Display Sub system (DSS) */ -#define OMAP2_L3_CORE_FW_CONNID_DSS 8 - -#endif diff --git a/arch/arm/plat-omap/include/plat/l3_3xxx.h b/arch/arm/plat-omap/include/plat/l3_3xxx.h deleted file mode 100644 index cde1938c5f82..000000000000 --- a/arch/arm/plat-omap/include/plat/l3_3xxx.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * arch/arm/plat-omap/include/plat/l3_3xxx.h - L3 firewall definitions - * - * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ - * Sumit Semwal - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ -#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L3_3XXX_H -#define __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L3_3XXX_H - -/* L3 Initiator IDs */ -/* Display Sub system (DSS) */ -#define OMAP3_L3_CORE_FW_INIT_ID_DSS 29 - -#endif diff --git a/arch/arm/plat-omap/include/plat/l4_2xxx.h b/arch/arm/plat-omap/include/plat/l4_2xxx.h deleted file mode 100644 index 3f39cf8a35c6..000000000000 --- a/arch/arm/plat-omap/include/plat/l4_2xxx.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * arch/arm/plat-omap/include/plat/l4_2xxx.h - L4 firewall definitions - * - * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ - * Sumit Semwal - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ -#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L4_2XXX_H -#define __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L4_2XXX_H - -/* L4 CORE */ -/* Display Sub system (DSS) */ -#define OMAP2420_L4_CORE_FW_DSS_CORE_REGION 28 -#define OMAP2420_L4_CORE_FW_DSS_DISPC_REGION 29 -#define OMAP2420_L4_CORE_FW_DSS_RFBI_REGION 30 -#define OMAP2420_L4_CORE_FW_DSS_VENC_REGION 31 -#define OMAP2420_L4_CORE_FW_DSS_TA_REGION 32 - -#endif diff --git a/arch/arm/plat-omap/include/plat/l4_3xxx.h b/arch/arm/plat-omap/include/plat/l4_3xxx.h deleted file mode 100644 index 881a858b1ffc..000000000000 --- a/arch/arm/plat-omap/include/plat/l4_3xxx.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/l4_3xxx.h - L4 firewall definitions - * - * Copyright (C) 2009 Nokia Corporation - * Paul Walmsley - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ -#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_L4_3XXX_H -#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_L4_3XXX_H - -/* L4 CORE */ -#define OMAP3_L4_CORE_FW_I2C1_REGION 21 -#define OMAP3_L4_CORE_FW_I2C1_TA_REGION 22 -#define OMAP3_L4_CORE_FW_I2C2_REGION 23 -#define OMAP3_L4_CORE_FW_I2C2_TA_REGION 24 -#define OMAP3_L4_CORE_FW_I2C3_REGION 73 -#define OMAP3_L4_CORE_FW_I2C3_TA_REGION 74 - -/* Display Sub system (DSS) */ -#define OMAP3_L4_CORE_FW_DSS_PROT_GROUP 2 - -#define OMAP3_L4_CORE_FW_DSS_DSI_REGION 104 -#define OMAP3ES1_L4_CORE_FW_DSS_CORE_REGION 3 -#define OMAP3_L4_CORE_FW_DSS_CORE_REGION 4 -#define OMAP3_L4_CORE_FW_DSS_DISPC_REGION 4 -#define OMAP3_L4_CORE_FW_DSS_RFBI_REGION 5 -#define OMAP3_L4_CORE_FW_DSS_VENC_REGION 6 -#define OMAP3_L4_CORE_FW_DSS_TA_REGION 7 -#endif diff --git a/arch/arm/plat-omap/include/plat/lcd_mipid.h b/arch/arm/plat-omap/include/plat/lcd_mipid.h deleted file mode 100644 index 8e52c6572281..000000000000 --- a/arch/arm/plat-omap/include/plat/lcd_mipid.h +++ /dev/null @@ -1,29 +0,0 @@ -#ifndef __LCD_MIPID_H -#define __LCD_MIPID_H - -enum mipid_test_num { - MIPID_TEST_RGB_LINES, -}; - -enum mipid_test_result { - MIPID_TEST_SUCCESS, - MIPID_TEST_INVALID, - MIPID_TEST_FAILED, -}; - -#ifdef __KERNEL__ - -struct mipid_platform_data { - int nreset_gpio; - int data_lines; - - void (*shutdown)(struct mipid_platform_data *pdata); - void (*set_bklight_level)(struct mipid_platform_data *pdata, - int level); - int (*get_bklight_level)(struct mipid_platform_data *pdata); - int (*get_bklight_max)(struct mipid_platform_data *pdata); -}; - -#endif - -#endif diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h deleted file mode 100644 index 18814127809a..000000000000 --- a/arch/arm/plat-omap/include/plat/mcbsp.h +++ /dev/null @@ -1,62 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/mcbsp.h - * - * Defines for Multi-Channel Buffered Serial Port - * - * Copyright (C) 2002 RidgeRun, Inc. - * Author: Steve Johnson - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ -#ifndef __ASM_ARCH_OMAP_MCBSP_H -#define __ASM_ARCH_OMAP_MCBSP_H - -#include <linux/spinlock.h> -#include <linux/clk.h> - -#define MCBSP_CONFIG_TYPE2 0x2 -#define MCBSP_CONFIG_TYPE3 0x3 -#define MCBSP_CONFIG_TYPE4 0x4 - -/* Platform specific configuration */ -struct omap_mcbsp_ops { - void (*request)(unsigned int); - void (*free)(unsigned int); -}; - -struct omap_mcbsp_platform_data { - struct omap_mcbsp_ops *ops; - u16 buffer_size; - u8 reg_size; - u8 reg_step; - - /* McBSP platform and instance specific features */ - bool has_wakeup; /* Wakeup capability */ - bool has_ccr; /* Transceiver has configuration control registers */ - int (*enable_st_clock)(unsigned int, bool); - int (*set_clk_src)(struct device *dev, struct clk *clk, const char *src); - int (*mux_signal)(struct device *dev, const char *signal, const char *src); -}; - -/** - * omap_mcbsp_dev_attr - OMAP McBSP device attributes for omap_hwmod - * @sidetone: name of the sidetone device - */ -struct omap_mcbsp_dev_attr { - const char *sidetone; -}; - -#endif diff --git a/arch/arm/plat-omap/include/plat/mcspi.h b/arch/arm/plat-omap/include/plat/mcspi.h deleted file mode 100644 index a357eb26bd25..000000000000 --- a/arch/arm/plat-omap/include/plat/mcspi.h +++ /dev/null @@ -1,23 +0,0 @@ -#ifndef _OMAP2_MCSPI_H -#define _OMAP2_MCSPI_H - -#define OMAP2_MCSPI_REV 0 -#define OMAP3_MCSPI_REV 1 -#define OMAP4_MCSPI_REV 2 - -#define OMAP4_MCSPI_REG_OFFSET 0x100 - -struct omap2_mcspi_platform_config { - unsigned short num_cs; - unsigned int regs_offset; -}; - -struct omap2_mcspi_dev_attr { - unsigned short num_chipselect; -}; - -struct omap2_mcspi_device_config { - unsigned turbo_mode:1; -}; - -#endif diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h index eb3e4d555343..8b4e4f2da2f5 100644 --- a/arch/arm/plat-omap/include/plat/mmc.h +++ b/arch/arm/plat-omap/include/plat/mmc.h @@ -15,7 +15,6 @@ #include <linux/device.h> #include <linux/mmc/host.h> -#include <plat/board.h> #include <plat/omap_hwmod.h> #define OMAP15XX_NR_MMC 1 diff --git a/arch/arm/plat-omap/include/plat/mux.h b/arch/arm/plat-omap/include/plat/mux.h deleted file mode 100644 index 323948959200..000000000000 --- a/arch/arm/plat-omap/include/plat/mux.h +++ /dev/null @@ -1,454 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/mux.h - * - * Table of the Omap register configurations for the FUNC_MUX and - * PULL_DWN combinations. - * - * Copyright (C) 2004 - 2008 Texas Instruments Inc. - * Copyright (C) 2003 - 2008 Nokia Corporation - * - * Written by Tony Lindgren - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * NOTE: Please use the following naming style for new pin entries. - * For example, W8_1610_MMC2_DAT0, where: - * - W8 = ball - * - 1610 = 1510 or 1610, none if common for both 1510 and 1610 - * - MMC2_DAT0 = function - */ - -#ifndef __ASM_ARCH_MUX_H -#define __ASM_ARCH_MUX_H - -#define PU_PD_SEL_NA 0 /* No pu_pd reg available */ -#define PULL_DWN_CTRL_NA 0 /* No pull-down control needed */ - -#ifdef CONFIG_OMAP_MUX_DEBUG -#define MUX_REG(reg, mode_offset, mode) .mux_reg_name = "FUNC_MUX_CTRL_"#reg, \ - .mux_reg = FUNC_MUX_CTRL_##reg, \ - .mask_offset = mode_offset, \ - .mask = mode, - -#define PULL_REG(reg, bit, status) .pull_name = "PULL_DWN_CTRL_"#reg, \ - .pull_reg = PULL_DWN_CTRL_##reg, \ - .pull_bit = bit, \ - .pull_val = status, - -#define PU_PD_REG(reg, status) .pu_pd_name = "PU_PD_SEL_"#reg, \ - .pu_pd_reg = PU_PD_SEL_##reg, \ - .pu_pd_val = status, - -#define MUX_REG_7XX(reg, mode_offset, mode) .mux_reg_name = "OMAP7XX_IO_CONF_"#reg, \ - .mux_reg = OMAP7XX_IO_CONF_##reg, \ - .mask_offset = mode_offset, \ - .mask = mode, - -#define PULL_REG_7XX(reg, bit, status) .pull_name = "OMAP7XX_IO_CONF_"#reg, \ - .pull_reg = OMAP7XX_IO_CONF_##reg, \ - .pull_bit = bit, \ - .pull_val = status, - -#else - -#define MUX_REG(reg, mode_offset, mode) .mux_reg = FUNC_MUX_CTRL_##reg, \ - .mask_offset = mode_offset, \ - .mask = mode, - -#define PULL_REG(reg, bit, status) .pull_reg = PULL_DWN_CTRL_##reg, \ - .pull_bit = bit, \ - .pull_val = status, - -#define PU_PD_REG(reg, status) .pu_pd_reg = PU_PD_SEL_##reg, \ - .pu_pd_val = status, - -#define MUX_REG_7XX(reg, mode_offset, mode) \ - .mux_reg = OMAP7XX_IO_CONF_##reg, \ - .mask_offset = mode_offset, \ - .mask = mode, - -#define PULL_REG_7XX(reg, bit, status) .pull_reg = OMAP7XX_IO_CONF_##reg, \ - .pull_bit = bit, \ - .pull_val = status, - -#endif /* CONFIG_OMAP_MUX_DEBUG */ - -#define MUX_CFG(desc, mux_reg, mode_offset, mode, \ - pull_reg, pull_bit, pull_status, \ - pu_pd_reg, pu_pd_status, debug_status) \ -{ \ - .name = desc, \ - .debug = debug_status, \ - MUX_REG(mux_reg, mode_offset, mode) \ - PULL_REG(pull_reg, pull_bit, pull_status) \ - PU_PD_REG(pu_pd_reg, pu_pd_status) \ -}, - - -/* - * OMAP730/850 has a slightly different config for the pin mux. - * - config regs are the OMAP7XX_IO_CONF_x regs (see omap7xx.h) regs and - * not the FUNC_MUX_CTRL_x regs from hardware.h - * - for pull-up/down, only has one enable bit which is is in the same register - * as mux config - */ -#define MUX_CFG_7XX(desc, mux_reg, mode_offset, mode, \ - pull_bit, pull_status, debug_status)\ -{ \ - .name = desc, \ - .debug = debug_status, \ - MUX_REG_7XX(mux_reg, mode_offset, mode) \ - PULL_REG_7XX(mux_reg, pull_bit, pull_status) \ - PU_PD_REG(NA, 0) \ -}, - -struct pin_config { - char *name; - const unsigned int mux_reg; - unsigned char debug; - - const unsigned char mask_offset; - const unsigned char mask; - - const char *pull_name; - const unsigned int pull_reg; - const unsigned char pull_val; - const unsigned char pull_bit; - - const char *pu_pd_name; - const unsigned int pu_pd_reg; - const unsigned char pu_pd_val; - -#if defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS) - const char *mux_reg_name; -#endif - -}; - -enum omap7xx_index { - /* OMAP 730 keyboard */ - E2_7XX_KBR0, - J7_7XX_KBR1, - E1_7XX_KBR2, - F3_7XX_KBR3, - D2_7XX_KBR4, - C2_7XX_KBC0, - D3_7XX_KBC1, - E4_7XX_KBC2, - F4_7XX_KBC3, - E3_7XX_KBC4, - - /* USB */ - AA17_7XX_USB_DM, - W16_7XX_USB_PU_EN, - W17_7XX_USB_VBUSI, - W18_7XX_USB_DMCK_OUT, - W19_7XX_USB_DCRST, - - /* MMC */ - MMC_7XX_CMD, - MMC_7XX_CLK, - MMC_7XX_DAT0, - - /* I2C */ - I2C_7XX_SCL, - I2C_7XX_SDA, - - /* SPI */ - SPI_7XX_1, - SPI_7XX_2, - SPI_7XX_3, - SPI_7XX_4, - SPI_7XX_5, - SPI_7XX_6, - - /* UART */ - UART_7XX_1, - UART_7XX_2, -}; - -enum omap1xxx_index { - /* UART1 (BT_UART_GATING)*/ - UART1_TX = 0, - UART1_RTS, - - /* UART2 (COM_UART_GATING)*/ - UART2_TX, - UART2_RX, - UART2_CTS, - UART2_RTS, - - /* UART3 (GIGA_UART_GATING) */ - UART3_TX, - UART3_RX, - UART3_CTS, - UART3_RTS, - UART3_CLKREQ, - UART3_BCLK, /* 12MHz clock out */ - Y15_1610_UART3_RTS, - - /* PWT & PWL */ - PWT, - PWL, - - /* USB master generic */ - R18_USB_VBUS, - R18_1510_USB_GPIO0, - W4_USB_PUEN, - W4_USB_CLKO, - W4_USB_HIGHZ, - W4_GPIO58, - - /* USB1 master */ - USB1_SUSP, - USB1_SEO, - W13_1610_USB1_SE0, - USB1_TXEN, - USB1_TXD, - USB1_VP, - USB1_VM, - USB1_RCV, - USB1_SPEED, - R13_1610_USB1_SPEED, - R13_1710_USB1_SE0, - - /* USB2 master */ - USB2_SUSP, - USB2_VP, - USB2_TXEN, - USB2_VM, - USB2_RCV, - USB2_SEO, - USB2_TXD, - - /* OMAP-1510 GPIO */ - R18_1510_GPIO0, - R19_1510_GPIO1, - M14_1510_GPIO2, - - /* OMAP1610 GPIO */ - P18_1610_GPIO3, - Y15_1610_GPIO17, - - /* OMAP-1710 GPIO */ - R18_1710_GPIO0, - V2_1710_GPIO10, - N21_1710_GPIO14, - W15_1710_GPIO40, - - /* MPUIO */ - MPUIO2, - N15_1610_MPUIO2, - MPUIO4, - MPUIO5, - T20_1610_MPUIO5, - W11_1610_MPUIO6, - V10_1610_MPUIO7, - W11_1610_MPUIO9, - V10_1610_MPUIO10, - W10_1610_MPUIO11, - E20_1610_MPUIO13, - U20_1610_MPUIO14, - E19_1610_MPUIO15, - - /* MCBSP2 */ - MCBSP2_CLKR, - MCBSP2_CLKX, - MCBSP2_DR, - MCBSP2_DX, - MCBSP2_FSR, - MCBSP2_FSX, - - /* MCBSP3 */ - MCBSP3_CLKX, - - /* Misc ballouts */ - BALLOUT_V8_ARMIO3, - N20_HDQ, - - /* OMAP-1610 MMC2 */ - W8_1610_MMC2_DAT0, - V8_1610_MMC2_DAT1, - W15_1610_MMC2_DAT2, - R10_1610_MMC2_DAT3, - Y10_1610_MMC2_CLK, - Y8_1610_MMC2_CMD, - V9_1610_MMC2_CMDDIR, - V5_1610_MMC2_DATDIR0, - W19_1610_MMC2_DATDIR1, - R18_1610_MMC2_CLKIN, - - /* OMAP-1610 External Trace Interface */ - M19_1610_ETM_PSTAT0, - L15_1610_ETM_PSTAT1, - L18_1610_ETM_PSTAT2, - L19_1610_ETM_D0, - J19_1610_ETM_D6, - J18_1610_ETM_D7, - - /* OMAP16XX GPIO */ - P20_1610_GPIO4, - V9_1610_GPIO7, - W8_1610_GPIO9, - N20_1610_GPIO11, - N19_1610_GPIO13, - P10_1610_GPIO22, - V5_1610_GPIO24, - AA20_1610_GPIO_41, - W19_1610_GPIO48, - M7_1610_GPIO62, - V14_16XX_GPIO37, - R9_16XX_GPIO18, - L14_16XX_GPIO49, - - /* OMAP-1610 uWire */ - V19_1610_UWIRE_SCLK, - U18_1610_UWIRE_SDI, - W21_1610_UWIRE_SDO, - N14_1610_UWIRE_CS0, - P15_1610_UWIRE_CS3, - N15_1610_UWIRE_CS1, - - /* OMAP-1610 SPI */ - U19_1610_SPIF_SCK, - U18_1610_SPIF_DIN, - P20_1610_SPIF_DIN, - W21_1610_SPIF_DOUT, - R18_1610_SPIF_DOUT, - N14_1610_SPIF_CS0, - N15_1610_SPIF_CS1, - T19_1610_SPIF_CS2, - P15_1610_SPIF_CS3, - - /* OMAP-1610 Flash */ - L3_1610_FLASH_CS2B_OE, - M8_1610_FLASH_CS2B_WE, - - /* First MMC */ - MMC_CMD, - MMC_DAT1, - MMC_DAT2, - MMC_DAT0, - MMC_CLK, - MMC_DAT3, - - /* OMAP-1710 MMC CMDDIR and DATDIR0 */ - M15_1710_MMC_CLKI, - P19_1710_MMC_CMDDIR, - P20_1710_MMC_DATDIR0, - - /* OMAP-1610 USB0 alternate pin configuration */ - W9_USB0_TXEN, - AA9_USB0_VP, - Y5_USB0_RCV, - R9_USB0_VM, - V6_USB0_TXD, - W5_USB0_SE0, - V9_USB0_SPEED, - V9_USB0_SUSP, - - /* USB2 */ - W9_USB2_TXEN, - AA9_USB2_VP, - Y5_USB2_RCV, - R9_USB2_VM, - V6_USB2_TXD, - W5_USB2_SE0, - - /* 16XX UART */ - R13_1610_UART1_TX, - V14_16XX_UART1_RX, - R14_1610_UART1_CTS, - AA15_1610_UART1_RTS, - R9_16XX_UART2_RX, - L14_16XX_UART3_RX, - - /* I2C OMAP-1610 */ - I2C_SCL, - I2C_SDA, - - /* Keypad */ - F18_1610_KBC0, - D20_1610_KBC1, - D19_1610_KBC2, - E18_1610_KBC3, - C21_1610_KBC4, - G18_1610_KBR0, - F19_1610_KBR1, - H14_1610_KBR2, - E20_1610_KBR3, - E19_1610_KBR4, - N19_1610_KBR5, - - /* Power management */ - T20_1610_LOW_PWR, - - /* MCLK Settings */ - V5_1710_MCLK_ON, - V5_1710_MCLK_OFF, - R10_1610_MCLK_ON, - R10_1610_MCLK_OFF, - - /* CompactFlash controller */ - P11_1610_CF_CD2, - R11_1610_CF_IOIS16, - V10_1610_CF_IREQ, - W10_1610_CF_RESET, - W11_1610_CF_CD1, - - /* parallel camera */ - J15_1610_CAM_LCLK, - J18_1610_CAM_D7, - J19_1610_CAM_D6, - J14_1610_CAM_D5, - K18_1610_CAM_D4, - K19_1610_CAM_D3, - K15_1610_CAM_D2, - K14_1610_CAM_D1, - L19_1610_CAM_D0, - L18_1610_CAM_VS, - L15_1610_CAM_HS, - M19_1610_CAM_RSTZ, - Y15_1610_CAM_OUTCLK, - - /* serial camera */ - H19_1610_CAM_EXCLK, - Y12_1610_CCP_CLKP, - W13_1610_CCP_CLKM, - W14_1610_CCP_DATAP, - Y14_1610_CCP_DATAM, - -}; - -struct omap_mux_cfg { - struct pin_config *pins; - unsigned long size; - int (*cfg_reg)(const struct pin_config *cfg); -}; - -#ifdef CONFIG_OMAP_MUX -/* setup pin muxing in Linux */ -extern int omap1_mux_init(void); -extern int omap_mux_register(struct omap_mux_cfg *); -extern int omap_cfg_reg(unsigned long reg_cfg); -#else -/* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */ -static inline int omap1_mux_init(void) { return 0; } -static inline int omap_cfg_reg(unsigned long reg_cfg) { return 0; } -#endif - -extern int omap2_mux_init(void); - -#endif diff --git a/arch/arm/plat-omap/include/plat/nand.h b/arch/arm/plat-omap/include/plat/nand.h deleted file mode 100644 index 67fc5060183e..000000000000 --- a/arch/arm/plat-omap/include/plat/nand.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/nand.h - * - * Copyright (C) 2006 Micron Technology Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <plat/gpmc.h> -#include <linux/mtd/partitions.h> - -enum nand_io { - NAND_OMAP_PREFETCH_POLLED = 0, /* prefetch polled mode, default */ - NAND_OMAP_POLLED, /* polled mode, without prefetch */ - NAND_OMAP_PREFETCH_DMA, /* prefetch enabled sDMA mode */ - NAND_OMAP_PREFETCH_IRQ /* prefetch enabled irq mode */ -}; - -struct omap_nand_platform_data { - int cs; - struct mtd_partition *parts; - struct gpmc_timings *gpmc_t; - int nr_parts; - bool dev_ready; - int gpmc_irq; - enum nand_io xfer_type; - unsigned long phys_base; - int devsize; - enum omap_ecc ecc_opt; -}; - -/* minimum size for IO mapping */ -#define NAND_IO_SIZE 4 - -#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE) -extern int gpmc_nand_init(struct omap_nand_platform_data *d); -#else -static inline int gpmc_nand_init(struct omap_nand_platform_data *d) -{ - return 0; -} -#endif diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h index 1a52725ffcf2..f4a4cd014795 100644 --- a/arch/arm/plat-omap/include/plat/omap-serial.h +++ b/arch/arm/plat-omap/include/plat/omap-serial.h @@ -18,11 +18,9 @@ #define __OMAP_SERIAL_H__ #include <linux/serial_core.h> -#include <linux/platform_device.h> +#include <linux/device.h> #include <linux/pm_qos.h> -#include <plat/mux.h> - #define DRIVER_NAME "omap_uart" /* @@ -42,10 +40,10 @@ #define OMAP_UART_WER_MOD_WKUP 0X7F /* Enable XON/XOFF flow control on output */ -#define OMAP_UART_SW_TX 0x04 +#define OMAP_UART_SW_TX 0x8 /* Enable XON/XOFF flow control on input */ -#define OMAP_UART_SW_RX 0x04 +#define OMAP_UART_SW_RX 0x2 #define OMAP_UART_SYSC_RESET 0X07 #define OMAP_UART_TCR_TRIG 0X0F @@ -54,7 +52,7 @@ #define OMAP_UART_DMA_CH_FREE -1 -#define OMAP_MAX_HSUART_PORTS 4 +#define OMAP_MAX_HSUART_PORTS 6 #define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA @@ -69,11 +67,14 @@ struct omap_uart_port_info { unsigned int dma_rx_timeout; unsigned int autosuspend_timeout; unsigned int dma_rx_poll_rate; + int DTR_gpio; + int DTR_inverted; + int DTR_present; int (*get_context_loss_count)(struct device *); - void (*set_forceidle)(struct platform_device *); - void (*set_noidle)(struct platform_device *); - void (*enable_wakeup)(struct platform_device *, bool); + void (*set_forceidle)(struct device *); + void (*set_noidle)(struct device *); + void (*enable_wakeup)(struct device *, bool); }; struct uart_omap_dma { @@ -102,39 +103,4 @@ struct uart_omap_dma { unsigned int rx_timeout; }; -struct uart_omap_port { - struct uart_port port; - struct uart_omap_dma uart_dma; - struct platform_device *pdev; - - unsigned char ier; - unsigned char lcr; - unsigned char mcr; - unsigned char fcr; - unsigned char efr; - unsigned char dll; - unsigned char dlh; - unsigned char mdr1; - unsigned char scr; - - int use_dma; - /* - * Some bits in registers are cleared on a read, so they must - * be saved whenever the register is read but the bits will not - * be immediately processed. - */ - unsigned int lsr_break_flag; - unsigned char msr_saved_flags; - char name[20]; - unsigned long port_activity; - u32 context_loss_cnt; - u32 errata; - u8 wakeups_enabled; - - struct pm_qos_request pm_qos_request; - u32 latency; - u32 calc_latency; - struct work_struct qos_work; -}; - #endif /* __OMAP_SERIAL_H__ */ diff --git a/arch/arm/plat-omap/include/plat/omap1510.h b/arch/arm/plat-omap/include/plat/omap1510.h deleted file mode 100644 index d24004668138..000000000000 --- a/arch/arm/plat-omap/include/plat/omap1510.h +++ /dev/null @@ -1,50 +0,0 @@ -/* arch/arm/plat-omap/include/mach/omap1510.h - * - * Hardware definitions for TI OMAP1510 processor. - * - * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_OMAP15XX_H -#define __ASM_ARCH_OMAP15XX_H - -/* - * ---------------------------------------------------------------------------- - * Base addresses - * ---------------------------------------------------------------------------- - */ - -/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */ - -#define OMAP1510_DSP_BASE 0xE0000000 -#define OMAP1510_DSP_SIZE 0x28000 -#define OMAP1510_DSP_START 0xE0000000 - -#define OMAP1510_DSPREG_BASE 0xE1000000 -#define OMAP1510_DSPREG_SIZE SZ_128K -#define OMAP1510_DSPREG_START 0xE1000000 - -#define OMAP1510_DSP_MMU_BASE (0xfffed200) - -#endif /* __ASM_ARCH_OMAP15XX_H */ - diff --git a/arch/arm/plat-omap/include/plat/omap16xx.h b/arch/arm/plat-omap/include/plat/omap16xx.h deleted file mode 100644 index e69e1d857b45..000000000000 --- a/arch/arm/plat-omap/include/plat/omap16xx.h +++ /dev/null @@ -1,202 +0,0 @@ -/* arch/arm/plat-omap/include/mach/omap16xx.h - * - * Hardware definitions for TI OMAP1610/5912/1710 processors. - * - * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_OMAP16XX_H -#define __ASM_ARCH_OMAP16XX_H - -/* - * ---------------------------------------------------------------------------- - * Base addresses - * ---------------------------------------------------------------------------- - */ - -/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */ - -#define OMAP16XX_DSP_BASE 0xE0000000 -#define OMAP16XX_DSP_SIZE 0x28000 -#define OMAP16XX_DSP_START 0xE0000000 - -#define OMAP16XX_DSPREG_BASE 0xE1000000 -#define OMAP16XX_DSPREG_SIZE SZ_128K -#define OMAP16XX_DSPREG_START 0xE1000000 - -#define OMAP16XX_SEC_BASE 0xFFFE4000 -#define OMAP16XX_SEC_DES (OMAP16XX_SEC_BASE + 0x0000) -#define OMAP16XX_SEC_SHA1MD5 (OMAP16XX_SEC_BASE + 0x0800) -#define OMAP16XX_SEC_RNG (OMAP16XX_SEC_BASE + 0x1000) - -/* - * --------------------------------------------------------------------------- - * Interrupts - * --------------------------------------------------------------------------- - */ -#define OMAP_IH2_0_BASE (0xfffe0000) -#define OMAP_IH2_1_BASE (0xfffe0100) -#define OMAP_IH2_2_BASE (0xfffe0200) -#define OMAP_IH2_3_BASE (0xfffe0300) - -#define OMAP_IH2_0_ITR (OMAP_IH2_0_BASE + 0x00) -#define OMAP_IH2_0_MIR (OMAP_IH2_0_BASE + 0x04) -#define OMAP_IH2_0_SIR_IRQ (OMAP_IH2_0_BASE + 0x10) -#define OMAP_IH2_0_SIR_FIQ (OMAP_IH2_0_BASE + 0x14) -#define OMAP_IH2_0_CONTROL (OMAP_IH2_0_BASE + 0x18) -#define OMAP_IH2_0_ILR0 (OMAP_IH2_0_BASE + 0x1c) -#define OMAP_IH2_0_ISR (OMAP_IH2_0_BASE + 0x9c) - -#define OMAP_IH2_1_ITR (OMAP_IH2_1_BASE + 0x00) -#define OMAP_IH2_1_MIR (OMAP_IH2_1_BASE + 0x04) -#define OMAP_IH2_1_SIR_IRQ (OMAP_IH2_1_BASE + 0x10) -#define OMAP_IH2_1_SIR_FIQ (OMAP_IH2_1_BASE + 0x14) -#define OMAP_IH2_1_CONTROL (OMAP_IH2_1_BASE + 0x18) -#define OMAP_IH2_1_ILR1 (OMAP_IH2_1_BASE + 0x1c) -#define OMAP_IH2_1_ISR (OMAP_IH2_1_BASE + 0x9c) - -#define OMAP_IH2_2_ITR (OMAP_IH2_2_BASE + 0x00) -#define OMAP_IH2_2_MIR (OMAP_IH2_2_BASE + 0x04) -#define OMAP_IH2_2_SIR_IRQ (OMAP_IH2_2_BASE + 0x10) -#define OMAP_IH2_2_SIR_FIQ (OMAP_IH2_2_BASE + 0x14) -#define OMAP_IH2_2_CONTROL (OMAP_IH2_2_BASE + 0x18) -#define OMAP_IH2_2_ILR2 (OMAP_IH2_2_BASE + 0x1c) -#define OMAP_IH2_2_ISR (OMAP_IH2_2_BASE + 0x9c) - -#define OMAP_IH2_3_ITR (OMAP_IH2_3_BASE + 0x00) -#define OMAP_IH2_3_MIR (OMAP_IH2_3_BASE + 0x04) -#define OMAP_IH2_3_SIR_IRQ (OMAP_IH2_3_BASE + 0x10) -#define OMAP_IH2_3_SIR_FIQ (OMAP_IH2_3_BASE + 0x14) -#define OMAP_IH2_3_CONTROL (OMAP_IH2_3_BASE + 0x18) -#define OMAP_IH2_3_ILR3 (OMAP_IH2_3_BASE + 0x1c) -#define OMAP_IH2_3_ISR (OMAP_IH2_3_BASE + 0x9c) - -/* - * ---------------------------------------------------------------------------- - * Clocks - * ---------------------------------------------------------------------------- - */ -#define OMAP16XX_ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24) - -/* - * ---------------------------------------------------------------------------- - * Pin configuration registers - * ---------------------------------------------------------------------------- - */ -#define OMAP16XX_CONF_VOLTAGE_VDDSHV6 (1 << 8) -#define OMAP16XX_CONF_VOLTAGE_VDDSHV7 (1 << 9) -#define OMAP16XX_CONF_VOLTAGE_VDDSHV8 (1 << 10) -#define OMAP16XX_CONF_VOLTAGE_VDDSHV9 (1 << 11) -#define OMAP16XX_SUBLVDS_CONF_VALID (1 << 13) - -/* - * ---------------------------------------------------------------------------- - * System control registers - * ---------------------------------------------------------------------------- - */ -#define OMAP1610_RESET_CONTROL 0xfffe1140 - -/* - * --------------------------------------------------------------------------- - * TIPB bus interface - * --------------------------------------------------------------------------- - */ -#define TIPB_SWITCH_BASE (0xfffbc800) -#define OMAP16XX_MMCSD2_SSW_MPU_CONF (TIPB_SWITCH_BASE + 0x160) - -/* UART3 Registers Mapping through MPU bus */ -#define UART3_RHR (OMAP1_UART3_BASE + 0) -#define UART3_THR (OMAP1_UART3_BASE + 0) -#define UART3_DLL (OMAP1_UART3_BASE + 0) -#define UART3_IER (OMAP1_UART3_BASE + 4) -#define UART3_DLH (OMAP1_UART3_BASE + 4) -#define UART3_IIR (OMAP1_UART3_BASE + 8) -#define UART3_FCR (OMAP1_UART3_BASE + 8) -#define UART3_EFR (OMAP1_UART3_BASE + 8) -#define UART3_LCR (OMAP1_UART3_BASE + 0x0C) -#define UART3_MCR (OMAP1_UART3_BASE + 0x10) -#define UART3_XON1_ADDR1 (OMAP1_UART3_BASE + 0x10) -#define UART3_XON2_ADDR2 (OMAP1_UART3_BASE + 0x14) -#define UART3_LSR (OMAP1_UART3_BASE + 0x14) -#define UART3_TCR (OMAP1_UART3_BASE + 0x18) -#define UART3_MSR (OMAP1_UART3_BASE + 0x18) -#define UART3_XOFF1 (OMAP1_UART3_BASE + 0x18) -#define UART3_XOFF2 (OMAP1_UART3_BASE + 0x1C) -#define UART3_SPR (OMAP1_UART3_BASE + 0x1C) -#define UART3_TLR (OMAP1_UART3_BASE + 0x1C) -#define UART3_MDR1 (OMAP1_UART3_BASE + 0x20) -#define UART3_MDR2 (OMAP1_UART3_BASE + 0x24) -#define UART3_SFLSR (OMAP1_UART3_BASE + 0x28) -#define UART3_TXFLL (OMAP1_UART3_BASE + 0x28) -#define UART3_RESUME (OMAP1_UART3_BASE + 0x2C) -#define UART3_TXFLH (OMAP1_UART3_BASE + 0x2C) -#define UART3_SFREGL (OMAP1_UART3_BASE + 0x30) -#define UART3_RXFLL (OMAP1_UART3_BASE + 0x30) -#define UART3_SFREGH (OMAP1_UART3_BASE + 0x34) -#define UART3_RXFLH (OMAP1_UART3_BASE + 0x34) -#define UART3_BLR (OMAP1_UART3_BASE + 0x38) -#define UART3_ACREG (OMAP1_UART3_BASE + 0x3C) -#define UART3_DIV16 (OMAP1_UART3_BASE + 0x3C) -#define UART3_SCR (OMAP1_UART3_BASE + 0x40) -#define UART3_SSR (OMAP1_UART3_BASE + 0x44) -#define UART3_EBLR (OMAP1_UART3_BASE + 0x48) -#define UART3_OSC_12M_SEL (OMAP1_UART3_BASE + 0x4C) -#define UART3_MVR (OMAP1_UART3_BASE + 0x50) - -/* - * --------------------------------------------------------------------------- - * Watchdog timer - * --------------------------------------------------------------------------- - */ - -/* 32-bit Watchdog timer in OMAP 16XX */ -#define OMAP_16XX_WATCHDOG_BASE (0xfffeb000) -#define OMAP_16XX_WIDR (OMAP_16XX_WATCHDOG_BASE + 0x00) -#define OMAP_16XX_WD_SYSCONFIG (OMAP_16XX_WATCHDOG_BASE + 0x10) -#define OMAP_16XX_WD_SYSSTATUS (OMAP_16XX_WATCHDOG_BASE + 0x14) -#define OMAP_16XX_WCLR (OMAP_16XX_WATCHDOG_BASE + 0x24) -#define OMAP_16XX_WCRR (OMAP_16XX_WATCHDOG_BASE + 0x28) -#define OMAP_16XX_WLDR (OMAP_16XX_WATCHDOG_BASE + 0x2c) -#define OMAP_16XX_WTGR (OMAP_16XX_WATCHDOG_BASE + 0x30) -#define OMAP_16XX_WWPS (OMAP_16XX_WATCHDOG_BASE + 0x34) -#define OMAP_16XX_WSPR (OMAP_16XX_WATCHDOG_BASE + 0x48) - -#define WCLR_PRE_SHIFT 5 -#define WCLR_PTV_SHIFT 2 - -#define WWPS_W_PEND_WSPR (1 << 4) -#define WWPS_W_PEND_WTGR (1 << 3) -#define WWPS_W_PEND_WLDR (1 << 2) -#define WWPS_W_PEND_WCRR (1 << 1) -#define WWPS_W_PEND_WCLR (1 << 0) - -#define WSPR_ENABLE_0 (0x0000bbbb) -#define WSPR_ENABLE_1 (0x00004444) -#define WSPR_DISABLE_0 (0x0000aaaa) -#define WSPR_DISABLE_1 (0x00005555) - -#define OMAP16XX_DSP_MMU_BASE (0xfffed200) -#define OMAP16XX_MAILBOX_BASE (0xfffcf000) - -#endif /* __ASM_ARCH_OMAP16XX_H */ - diff --git a/arch/arm/plat-omap/include/plat/omap24xx.h b/arch/arm/plat-omap/include/plat/omap24xx.h deleted file mode 100644 index 92df9e27cc5c..000000000000 --- a/arch/arm/plat-omap/include/plat/omap24xx.h +++ /dev/null @@ -1,89 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/omap24xx.h - * - * This file contains the processor specific definitions - * of the TI OMAP24XX. - * - * Copyright (C) 2007 Texas Instruments. - * Copyright (C) 2007 Nokia Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#ifndef __ASM_ARCH_OMAP2_H -#define __ASM_ARCH_OMAP2_H - -/* - * Please place only base defines here and put the rest in device - * specific headers. Note also that some of these defines are needed - * for omap1 to compile without adding ifdefs. - */ - -#define L4_24XX_BASE 0x48000000 -#define L4_WK_243X_BASE 0x49000000 -#define L3_24XX_BASE 0x68000000 - -/* interrupt controller */ -#define OMAP24XX_IC_BASE (L4_24XX_BASE + 0xfe000) -#define OMAP24XX_IVA_INTC_BASE 0x40000000 - -#define OMAP242X_CTRL_BASE L4_24XX_BASE -#define OMAP2420_32KSYNCT_BASE (L4_24XX_BASE + 0x4000) -#define OMAP2420_PRCM_BASE (L4_24XX_BASE + 0x8000) -#define OMAP2420_CM_BASE (L4_24XX_BASE + 0x8000) -#define OMAP2420_PRM_BASE OMAP2420_CM_BASE -#define OMAP2420_SDRC_BASE (L3_24XX_BASE + 0x9000) -#define OMAP2420_SMS_BASE 0x68008000 -#define OMAP2420_GPMC_BASE 0x6800a000 - -#define OMAP2430_32KSYNCT_BASE (L4_WK_243X_BASE + 0x20000) -#define OMAP2430_PRCM_BASE (L4_WK_243X_BASE + 0x6000) -#define OMAP2430_CM_BASE (L4_WK_243X_BASE + 0x6000) -#define OMAP2430_PRM_BASE OMAP2430_CM_BASE - -#define OMAP243X_SMS_BASE 0x6C000000 -#define OMAP243X_SDRC_BASE 0x6D000000 -#define OMAP243X_GPMC_BASE 0x6E000000 -#define OMAP243X_SCM_BASE (L4_WK_243X_BASE + 0x2000) -#define OMAP243X_CTRL_BASE OMAP243X_SCM_BASE -#define OMAP243X_HS_BASE (L4_24XX_BASE + 0x000ac000) - -/* DSP SS */ -#define OMAP2420_DSP_BASE 0x58000000 -#define OMAP2420_DSP_MEM_BASE (OMAP2420_DSP_BASE + 0x0) -#define OMAP2420_DSP_IPI_BASE (OMAP2420_DSP_BASE + 0x1000000) -#define OMAP2420_DSP_MMU_BASE (OMAP2420_DSP_BASE + 0x2000000) - -#define OMAP243X_DSP_BASE 0x5C000000 -#define OMAP243X_DSP_MEM_BASE (OMAP243X_DSP_BASE + 0x0) -#define OMAP243X_DSP_MMU_BASE (OMAP243X_DSP_BASE + 0x1000000) - -/* Mailbox */ -#define OMAP24XX_MAILBOX_BASE (L4_24XX_BASE + 0x94000) - -/* Camera */ -#define OMAP24XX_CAMERA_BASE (L4_24XX_BASE + 0x52000) - -/* Security */ -#define OMAP24XX_SEC_BASE (L4_24XX_BASE + 0xA0000) -#define OMAP24XX_SEC_RNG_BASE (OMAP24XX_SEC_BASE + 0x0000) -#define OMAP24XX_SEC_DES_BASE (OMAP24XX_SEC_BASE + 0x2000) -#define OMAP24XX_SEC_SHA1MD5_BASE (OMAP24XX_SEC_BASE + 0x4000) -#define OMAP24XX_SEC_AES_BASE (OMAP24XX_SEC_BASE + 0x6000) -#define OMAP24XX_SEC_PKA_BASE (OMAP24XX_SEC_BASE + 0x8000) - -#endif /* __ASM_ARCH_OMAP2_H */ - diff --git a/arch/arm/plat-omap/include/plat/omap34xx.h b/arch/arm/plat-omap/include/plat/omap34xx.h deleted file mode 100644 index 0d818acf3917..000000000000 --- a/arch/arm/plat-omap/include/plat/omap34xx.h +++ /dev/null @@ -1,101 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/omap34xx.h - * - * This file contains the processor specific definitions of the TI OMAP34XX. - * - * Copyright (C) 2007 Texas Instruments. - * Copyright (C) 2007 Nokia Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_OMAP3_H -#define __ASM_ARCH_OMAP3_H - -/* - * Please place only base defines here and put the rest in device - * specific headers. - */ - -#define L4_34XX_BASE 0x48000000 -#define L4_WK_34XX_BASE 0x48300000 -#define L4_PER_34XX_BASE 0x49000000 -#define L4_EMU_34XX_BASE 0x54000000 -#define L3_34XX_BASE 0x68000000 - -#define L4_WK_AM33XX_BASE 0x44C00000 - -#define OMAP3430_32KSYNCT_BASE 0x48320000 -#define OMAP3430_CM_BASE 0x48004800 -#define OMAP3430_PRM_BASE 0x48306800 -#define OMAP343X_SMS_BASE 0x6C000000 -#define OMAP343X_SDRC_BASE 0x6D000000 -#define OMAP34XX_GPMC_BASE 0x6E000000 -#define OMAP343X_SCM_BASE 0x48002000 -#define OMAP343X_CTRL_BASE OMAP343X_SCM_BASE - -#define OMAP34XX_IC_BASE 0x48200000 - -#define OMAP3430_ISP_BASE (L4_34XX_BASE + 0xBC000) -#define OMAP3430_ISP_CBUFF_BASE (OMAP3430_ISP_BASE + 0x0100) -#define OMAP3430_ISP_CCP2_BASE (OMAP3430_ISP_BASE + 0x0400) -#define OMAP3430_ISP_CCDC_BASE (OMAP3430_ISP_BASE + 0x0600) -#define OMAP3430_ISP_HIST_BASE (OMAP3430_ISP_BASE + 0x0A00) -#define OMAP3430_ISP_H3A_BASE (OMAP3430_ISP_BASE + 0x0C00) -#define OMAP3430_ISP_PREV_BASE (OMAP3430_ISP_BASE + 0x0E00) -#define OMAP3430_ISP_RESZ_BASE (OMAP3430_ISP_BASE + 0x1000) -#define OMAP3430_ISP_SBL_BASE (OMAP3430_ISP_BASE + 0x1200) -#define OMAP3430_ISP_MMU_BASE (OMAP3430_ISP_BASE + 0x1400) -#define OMAP3430_ISP_CSI2A_REGS1_BASE (OMAP3430_ISP_BASE + 0x1800) -#define OMAP3430_ISP_CSIPHY2_BASE (OMAP3430_ISP_BASE + 0x1970) -#define OMAP3630_ISP_CSI2A_REGS2_BASE (OMAP3430_ISP_BASE + 0x19C0) -#define OMAP3630_ISP_CSI2C_REGS1_BASE (OMAP3430_ISP_BASE + 0x1C00) -#define OMAP3630_ISP_CSIPHY1_BASE (OMAP3430_ISP_BASE + 0x1D70) -#define OMAP3630_ISP_CSI2C_REGS2_BASE (OMAP3430_ISP_BASE + 0x1DC0) - -#define OMAP3430_ISP_END (OMAP3430_ISP_BASE + 0x06F) -#define OMAP3430_ISP_CBUFF_END (OMAP3430_ISP_CBUFF_BASE + 0x077) -#define OMAP3430_ISP_CCP2_END (OMAP3430_ISP_CCP2_BASE + 0x1EF) -#define OMAP3430_ISP_CCDC_END (OMAP3430_ISP_CCDC_BASE + 0x0A7) -#define OMAP3430_ISP_HIST_END (OMAP3430_ISP_HIST_BASE + 0x047) -#define OMAP3430_ISP_H3A_END (OMAP3430_ISP_H3A_BASE + 0x05F) -#define OMAP3430_ISP_PREV_END (OMAP3430_ISP_PREV_BASE + 0x09F) -#define OMAP3430_ISP_RESZ_END (OMAP3430_ISP_RESZ_BASE + 0x0AB) -#define OMAP3430_ISP_SBL_END (OMAP3430_ISP_SBL_BASE + 0x0FB) -#define OMAP3430_ISP_MMU_END (OMAP3430_ISP_MMU_BASE + 0x06F) -#define OMAP3430_ISP_CSI2A_REGS1_END (OMAP3430_ISP_CSI2A_REGS1_BASE + 0x16F) -#define OMAP3430_ISP_CSIPHY2_END (OMAP3430_ISP_CSIPHY2_BASE + 0x00B) -#define OMAP3630_ISP_CSI2A_REGS2_END (OMAP3630_ISP_CSI2A_REGS2_BASE + 0x3F) -#define OMAP3630_ISP_CSI2C_REGS1_END (OMAP3630_ISP_CSI2C_REGS1_BASE + 0x16F) -#define OMAP3630_ISP_CSIPHY1_END (OMAP3630_ISP_CSIPHY1_BASE + 0x00B) -#define OMAP3630_ISP_CSI2C_REGS2_END (OMAP3630_ISP_CSI2C_REGS2_BASE + 0x3F) - -#define OMAP34XX_HSUSB_OTG_BASE (L4_34XX_BASE + 0xAB000) -#define OMAP34XX_USBTLL_BASE (L4_34XX_BASE + 0x62000) -#define OMAP34XX_UHH_CONFIG_BASE (L4_34XX_BASE + 0x64000) -#define OMAP34XX_OHCI_BASE (L4_34XX_BASE + 0x64400) -#define OMAP34XX_EHCI_BASE (L4_34XX_BASE + 0x64800) -#define OMAP34XX_SR1_BASE 0x480C9000 -#define OMAP34XX_SR2_BASE 0x480CB000 - -#define OMAP34XX_MAILBOX_BASE (L4_34XX_BASE + 0x94000) - -/* Security */ -#define OMAP34XX_SEC_BASE (L4_34XX_BASE + 0xA0000) -#define OMAP34XX_SEC_SHA1MD5_BASE (OMAP34XX_SEC_BASE + 0x23000) -#define OMAP34XX_SEC_AES_BASE (OMAP34XX_SEC_BASE + 0x25000) - -#endif /* __ASM_ARCH_OMAP3_H */ - diff --git a/arch/arm/plat-omap/include/plat/omap4-keypad.h b/arch/arm/plat-omap/include/plat/omap4-keypad.h deleted file mode 100644 index 8ad0a377a54b..000000000000 --- a/arch/arm/plat-omap/include/plat/omap4-keypad.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef ARCH_ARM_PLAT_OMAP4_KEYPAD_H -#define ARCH_ARM_PLAT_OMAP4_KEYPAD_H - -extern int omap4_keyboard_init(struct omap4_keypad_platform_data *, - struct omap_board_data *); -#endif diff --git a/arch/arm/plat-omap/include/plat/omap44xx.h b/arch/arm/plat-omap/include/plat/omap44xx.h deleted file mode 100644 index c0d478e55c84..000000000000 --- a/arch/arm/plat-omap/include/plat/omap44xx.h +++ /dev/null @@ -1,62 +0,0 @@ -/*: - * Address mappings and base address for OMAP4 interconnects - * and peripherals. - * - * Copyright (C) 2009 Texas Instruments - * - * Author: Santosh Shilimkar <santosh.shilimkar@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_ARCH_OMAP44XX_H -#define __ASM_ARCH_OMAP44XX_H - -/* - * Please place only base defines here and put the rest in device - * specific headers. - */ -#define L4_44XX_BASE 0x4a000000 -#define L4_WK_44XX_BASE 0x4a300000 -#define L4_PER_44XX_BASE 0x48000000 -#define L4_EMU_44XX_BASE 0x54000000 -#define L3_44XX_BASE 0x44000000 -#define OMAP44XX_EMIF1_BASE 0x4c000000 -#define OMAP44XX_EMIF2_BASE 0x4d000000 -#define OMAP44XX_DMM_BASE 0x4e000000 -#define OMAP4430_32KSYNCT_BASE 0x4a304000 -#define OMAP4430_CM1_BASE 0x4a004000 -#define OMAP4430_CM_BASE OMAP4430_CM1_BASE -#define OMAP4430_CM2_BASE 0x4a008000 -#define OMAP4430_PRM_BASE 0x4a306000 -#define OMAP4430_PRCM_MPU_BASE 0x48243000 -#define OMAP44XX_GPMC_BASE 0x50000000 -#define OMAP443X_SCM_BASE 0x4a002000 -#define OMAP443X_CTRL_BASE 0x4a100000 -#define OMAP44XX_IC_BASE 0x48200000 -#define OMAP44XX_IVA_INTC_BASE 0x40000000 -#define IRQ_SIR_IRQ 0x0040 -#define OMAP44XX_GIC_DIST_BASE 0x48241000 -#define OMAP44XX_GIC_CPU_BASE 0x48240100 -#define OMAP44XX_SCU_BASE 0x48240000 -#define OMAP44XX_LOCAL_TWD_BASE 0x48240600 -#define OMAP44XX_L2CACHE_BASE 0x48242000 -#define OMAP44XX_WKUPGEN_BASE 0x48281000 -#define OMAP44XX_MCPDM_BASE 0x40132000 -#define OMAP44XX_MCPDM_L3_BASE 0x49032000 -#define OMAP44XX_SAR_RAM_BASE 0x4a326000 - -#define OMAP44XX_MAILBOX_BASE (L4_44XX_BASE + 0xF4000) -#define OMAP44XX_HSUSB_OTG_BASE (L4_44XX_BASE + 0xAB000) - -#define OMAP4_MMU1_BASE 0x55082000 -#define OMAP4_MMU2_BASE 0x4A066000 - -#define OMAP44XX_USBTLL_BASE (L4_44XX_BASE + 0x62000) -#define OMAP44XX_UHH_CONFIG_BASE (L4_44XX_BASE + 0x64000) -#define OMAP44XX_HSUSB_OHCI_BASE (L4_44XX_BASE + 0x64800) -#define OMAP44XX_HSUSB_EHCI_BASE (L4_44XX_BASE + 0x64C00) - -#endif /* __ASM_ARCH_OMAP44XX_H */ - diff --git a/arch/arm/plat-omap/include/plat/omap54xx.h b/arch/arm/plat-omap/include/plat/omap54xx.h deleted file mode 100644 index a2582bb3cab3..000000000000 --- a/arch/arm/plat-omap/include/plat/omap54xx.h +++ /dev/null @@ -1,32 +0,0 @@ -/*: - * Address mappings and base address for OMAP5 interconnects - * and peripherals. - * - * Copyright (C) 2012 Texas Instruments - * Santosh Shilimkar <santosh.shilimkar@ti.com> - * Sricharan <r.sricharan@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_SOC_OMAP54XX_H -#define __ASM_SOC_OMAP54XX_H - -/* - * Please place only base defines here and put the rest in device - * specific headers. - */ -#define L4_54XX_BASE 0x4a000000 -#define L4_WK_54XX_BASE 0x4ae00000 -#define L4_PER_54XX_BASE 0x48000000 -#define L3_54XX_BASE 0x44000000 -#define OMAP54XX_32KSYNCT_BASE 0x4ae04000 -#define OMAP54XX_CM_CORE_AON_BASE 0x4a004000 -#define OMAP54XX_CM_CORE_BASE 0x4a008000 -#define OMAP54XX_PRM_BASE 0x4ae06000 -#define OMAP54XX_PRCM_MPU_BASE 0x48243000 -#define OMAP54XX_SCM_BASE 0x4a002000 -#define OMAP54XX_CTRL_BASE 0x4a002800 - -#endif /* __ASM_SOC_OMAP555554XX_H */ diff --git a/arch/arm/plat-omap/include/plat/omap7xx.h b/arch/arm/plat-omap/include/plat/omap7xx.h deleted file mode 100644 index 48e4757e1e30..000000000000 --- a/arch/arm/plat-omap/include/plat/omap7xx.h +++ /dev/null @@ -1,107 +0,0 @@ -/* arch/arm/plat-omap/include/mach/omap7xx.h - * - * Hardware definitions for TI OMAP7XX processor. - * - * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com> - * Adapted for omap850 by Zebediah C. McClure <zmc@lurian.net> - * Adapted for omap7xx by Alistair Buxton <a.j.buxton@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_OMAP7XX_H -#define __ASM_ARCH_OMAP7XX_H - -/* - * ---------------------------------------------------------------------------- - * Base addresses - * ---------------------------------------------------------------------------- - */ - -/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */ - -#define OMAP7XX_DSP_BASE 0xE0000000 -#define OMAP7XX_DSP_SIZE 0x50000 -#define OMAP7XX_DSP_START 0xE0000000 - -#define OMAP7XX_DSPREG_BASE 0xE1000000 -#define OMAP7XX_DSPREG_SIZE SZ_128K -#define OMAP7XX_DSPREG_START 0xE1000000 - -#define OMAP7XX_SPI1_BASE 0xfffc0800 -#define OMAP7XX_SPI2_BASE 0xfffc1000 - -/* - * ---------------------------------------------------------------------------- - * OMAP7XX specific configuration registers - * ---------------------------------------------------------------------------- - */ -#define OMAP7XX_CONFIG_BASE 0xfffe1000 -#define OMAP7XX_IO_CONF_0 0xfffe1070 -#define OMAP7XX_IO_CONF_1 0xfffe1074 -#define OMAP7XX_IO_CONF_2 0xfffe1078 -#define OMAP7XX_IO_CONF_3 0xfffe107c -#define OMAP7XX_IO_CONF_4 0xfffe1080 -#define OMAP7XX_IO_CONF_5 0xfffe1084 -#define OMAP7XX_IO_CONF_6 0xfffe1088 -#define OMAP7XX_IO_CONF_7 0xfffe108c -#define OMAP7XX_IO_CONF_8 0xfffe1090 -#define OMAP7XX_IO_CONF_9 0xfffe1094 -#define OMAP7XX_IO_CONF_10 0xfffe1098 -#define OMAP7XX_IO_CONF_11 0xfffe109c -#define OMAP7XX_IO_CONF_12 0xfffe10a0 -#define OMAP7XX_IO_CONF_13 0xfffe10a4 - -#define OMAP7XX_MODE_1 0xfffe1010 -#define OMAP7XX_MODE_2 0xfffe1014 - -/* CSMI specials: in terms of base + offset */ -#define OMAP7XX_MODE2_OFFSET 0x14 - -/* - * ---------------------------------------------------------------------------- - * OMAP7XX traffic controller configuration registers - * ---------------------------------------------------------------------------- - */ -#define OMAP7XX_FLASH_CFG_0 0xfffecc10 -#define OMAP7XX_FLASH_ACFG_0 0xfffecc50 -#define OMAP7XX_FLASH_CFG_1 0xfffecc14 -#define OMAP7XX_FLASH_ACFG_1 0xfffecc54 - -/* - * ---------------------------------------------------------------------------- - * OMAP7XX DSP control registers - * ---------------------------------------------------------------------------- - */ -#define OMAP7XX_ICR_BASE 0xfffbb800 -#define OMAP7XX_DSP_M_CTL 0xfffbb804 -#define OMAP7XX_DSP_MMU_BASE 0xfffed200 - -/* - * ---------------------------------------------------------------------------- - * OMAP7XX PCC_UPLD configuration registers - * ---------------------------------------------------------------------------- - */ -#define OMAP7XX_PCC_UPLD_CTRL_BASE (0xfffe0900) -#define OMAP7XX_PCC_UPLD_CTRL (OMAP7XX_PCC_UPLD_CTRL_BASE + 0x00) - -#endif /* __ASM_ARCH_OMAP7XX_H */ - diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h index 4327b2c90c3d..e7259c0d33ec 100644 --- a/arch/arm/plat-omap/include/plat/omap_device.h +++ b/arch/arm/plat-omap/include/plat/omap_device.h @@ -60,6 +60,7 @@ extern struct dev_pm_domain omap_device_pm_domain; * @_dev_wakeup_lat_limit: dev wakeup latency limit in nsec - set by OMAP PM * @_state: one of OMAP_DEVICE_STATE_* (see above) * @flags: device flags + * @_driver_status: one of BUS_NOTIFY_*_DRIVER from <linux/device.h> * * Integrates omap_hwmod data into Linux platform_device. * @@ -73,6 +74,7 @@ struct omap_device { struct omap_device_pm_latency *pm_lats; u32 dev_wakeup_lat; u32 _dev_wakeup_lat_limit; + unsigned long _driver_status; u8 pm_lats_cnt; s8 pm_lat_level; u8 hwmods_cnt; diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h index 6132972aff37..05330735f23f 100644 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h @@ -615,6 +615,7 @@ int omap_hwmod_softreset(struct omap_hwmod *oh); int omap_hwmod_count_resources(struct omap_hwmod *oh); int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res); +int omap_hwmod_fill_dma_resources(struct omap_hwmod *oh, struct resource *res); int omap_hwmod_get_resource_byname(struct omap_hwmod *oh, unsigned int type, const char *name, struct resource *res); @@ -658,6 +659,7 @@ extern int omap2420_hwmod_init(void); extern int omap2430_hwmod_init(void); extern int omap3xxx_hwmod_init(void); extern int omap44xx_hwmod_init(void); +extern int am33xx_hwmod_init(void); extern int __init omap_hwmod_register_links(struct omap_hwmod_ocp_if **ois); diff --git a/arch/arm/plat-omap/include/plat/onenand.h b/arch/arm/plat-omap/include/plat/onenand.h deleted file mode 100644 index 2858667d2e4f..000000000000 --- a/arch/arm/plat-omap/include/plat/onenand.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/onenand.h - * - * Copyright (C) 2006 Nokia Corporation - * Author: Juha Yrjola - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> - -#define ONENAND_SYNC_READ (1 << 0) -#define ONENAND_SYNC_READWRITE (1 << 1) - -struct onenand_freq_info { - u16 maf_id; - u16 dev_id; - u16 ver_id; -}; - -struct omap_onenand_platform_data { - int cs; - int gpio_irq; - struct mtd_partition *parts; - int nr_parts; - int (*onenand_setup)(void __iomem *, int *freq_ptr); - int (*get_freq)(const struct onenand_freq_info *freq_info, - bool *clk_dep); - int dma_channel; - u8 flags; - u8 regulator_can_sleep; - u8 skip_initial_unlocking; -}; - -#define ONENAND_MAX_PARTITIONS 8 - -#if defined(CONFIG_MTD_ONENAND_OMAP2) || \ - defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) - -extern void gpmc_onenand_init(struct omap_onenand_platform_data *d); - -#else - -#define board_onenand_data NULL - -static inline void gpmc_onenand_init(struct omap_onenand_platform_data *d) -{ -} - -#endif diff --git a/arch/arm/plat-omap/include/plat/param.h b/arch/arm/plat-omap/include/plat/param.h deleted file mode 100644 index 1eb4dc326979..000000000000 --- a/arch/arm/plat-omap/include/plat/param.h +++ /dev/null @@ -1,8 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/param.h - * - */ - -#ifdef CONFIG_OMAP_32K_TIMER_HZ -#define HZ CONFIG_OMAP_32K_TIMER_HZ -#endif diff --git a/arch/arm/plat-omap/include/plat/remoteproc.h b/arch/arm/plat-omap/include/plat/remoteproc.h deleted file mode 100644 index b10eac89e2e9..000000000000 --- a/arch/arm/plat-omap/include/plat/remoteproc.h +++ /dev/null @@ -1,57 +0,0 @@ -/* - * Remote Processor - omap-specific bits - * - * Copyright (C) 2011 Texas Instruments, Inc. - * Copyright (C) 2011 Google, Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef _PLAT_REMOTEPROC_H -#define _PLAT_REMOTEPROC_H - -struct rproc_ops; -struct platform_device; - -/* - * struct omap_rproc_pdata - omap remoteproc's platform data - * @name: the remoteproc's name - * @oh_name: omap hwmod device - * @oh_name_opt: optional, secondary omap hwmod device - * @firmware: name of firmware file to load - * @mbox_name: name of omap mailbox device to use with this rproc - * @ops: start/stop rproc handlers - * @device_enable: omap-specific handler for enabling a device - * @device_shutdown: omap-specific handler for shutting down a device - */ -struct omap_rproc_pdata { - const char *name; - const char *oh_name; - const char *oh_name_opt; - const char *firmware; - const char *mbox_name; - const struct rproc_ops *ops; - int (*device_enable) (struct platform_device *pdev); - int (*device_shutdown) (struct platform_device *pdev); -}; - -#if defined(CONFIG_OMAP_REMOTEPROC) || defined(CONFIG_OMAP_REMOTEPROC_MODULE) - -void __init omap_rproc_reserve_cma(void); - -#else - -void __init omap_rproc_reserve_cma(void) -{ -} - -#endif - -#endif /* _PLAT_REMOTEPROC_H */ diff --git a/arch/arm/plat-omap/include/plat/ti81xx.h b/arch/arm/plat-omap/include/plat/ti81xx.h deleted file mode 100644 index 8f9843f78422..000000000000 --- a/arch/arm/plat-omap/include/plat/ti81xx.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * This file contains the address data for various TI81XX modules. - * - * Copyright (C) 2010 Texas Instruments, Inc. - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __ASM_ARCH_TI81XX_H -#define __ASM_ARCH_TI81XX_H - -#define L4_SLOW_TI81XX_BASE 0x48000000 - -#define TI81XX_SCM_BASE 0x48140000 -#define TI81XX_CTRL_BASE TI81XX_SCM_BASE -#define TI81XX_PRCM_BASE 0x48180000 - -#define TI81XX_ARM_INTC_BASE 0x48200000 - -#endif /* __ASM_ARCH_TI81XX_H */ diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h index 548a4c8d63df..bd20588c356b 100644 --- a/arch/arm/plat-omap/include/plat/usb.h +++ b/arch/arm/plat-omap/include/plat/usb.h @@ -5,7 +5,6 @@ #include <linux/io.h> #include <linux/usb/musb.h> -#include <plat/board.h> #define OMAP3_HS_USB_PORTS 3 diff --git a/arch/arm/plat-omap/include/plat/voltage.h b/arch/arm/plat-omap/include/plat/voltage.h deleted file mode 100644 index 5be4d5def427..000000000000 --- a/arch/arm/plat-omap/include/plat/voltage.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * OMAP Voltage Management Routines - * - * Copyright (C) 2011, Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ARCH_ARM_OMAP_VOLTAGE_H -#define __ARCH_ARM_OMAP_VOLTAGE_H - -/** - * struct omap_volt_data - Omap voltage specific data. - * @voltage_nominal: The possible voltage value in uV - * @sr_efuse_offs: The offset of the efuse register(from system - * control module base address) from where to read - * the n-target value for the smartreflex module. - * @sr_errminlimit: Error min limit value for smartreflex. This value - * differs at differnet opp and thus is linked - * with voltage. - * @vp_errorgain: Error gain value for the voltage processor. This - * field also differs according to the voltage/opp. - */ -struct omap_volt_data { - u32 volt_nominal; - u32 sr_efuse_offs; - u8 sr_errminlimit; - u8 vp_errgain; -}; -struct voltagedomain; - -struct voltagedomain *voltdm_lookup(const char *name); -int voltdm_scale(struct voltagedomain *voltdm, unsigned long target_volt); -unsigned long voltdm_get_voltage(struct voltagedomain *voltdm); -struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm, - unsigned long volt); -#endif |