12 files changed, 4 insertions, 963 deletions

diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 9bd2776e7d05..cb8e3d655d1a 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -236,13 +236,6 @@ config S3C_SETUP_CAMIF
 	help
 	  Compile in common setup code for S3C CAMIF devices
 
-# DMA
-
-config S3C_DMA
-	bool
-	help
-	  Internal configuration for S3C DMA core
-
 config SAMSUNG_PM_GPIO
 	bool
 	default y if GPIO_SAMSUNG && PM
@@ -250,14 +243,6 @@ config SAMSUNG_PM_GPIO
 	  Include legacy GPIO power management code for platforms not using
 	  pinctrl-samsung driver.
 
-config SAMSUNG_DMADEV
-	bool "Use legacy Samsung DMA abstraction"
-	depends on CPU_S5PV210 || ARCH_S3C64XX
-	select DMADEVICES
-	default y
-	help
-	  Use DMA device engine for PL330 DMAC.
-
 endif
 
 config S5P_DEV_MFC
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index 87746c37f030..1a29ab1f446d 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -26,12 +26,6 @@ obj-$(CONFIG_SAMSUNG_DEV_BACKLIGHT)	+= dev-backlight.o
 
 obj-$(CONFIG_S3C_SETUP_CAMIF)	+= setup-camif.o
 
-# DMA support
-
-obj-$(CONFIG_S3C_DMA)		+= dma.o s3c-dma-ops.o
-
-obj-$(CONFIG_SAMSUNG_DMADEV)	+= dma-ops.o
-
 # PM support
 
 obj-$(CONFIG_PM_SLEEP)		+= pm-common.o
diff --git a/arch/arm/plat-samsung/cpu.c b/arch/arm/plat-samsung/cpu.c
index 360618ee39e5..71333bb61013 100644
--- a/arch/arm/plat-samsung/cpu.c
+++ b/arch/arm/plat-samsung/cpu.c
@@ -40,10 +40,14 @@ void __init s3c64xx_init_cpu(void)
 	}
 
 	samsung_cpu_rev = 0;
+
+	pr_info("Samsung CPU ID: 0x%08lx\n", samsung_cpu_id);
 }
 
 void __init s5p_init_cpu(void __iomem *cpuid_addr)
 {
 	samsung_cpu_id = __raw_readl(cpuid_addr);
 	samsung_cpu_rev = samsung_cpu_id & 0xFF;
+
+	pr_info("Samsung CPU ID: 0x%08lx\n", samsung_cpu_id);
 }
diff --git a/arch/arm/plat-samsung/dma-ops.c b/arch/arm/plat-samsung/dma-ops.c
deleted file mode 100644
index 886326ee6f6c..000000000000
--- a/arch/arm/plat-samsung/dma-ops.c
+++ /dev/null
@@ -1,146 +0,0 @@
-/* linux/arch/arm/plat-samsung/dma-ops.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung DMA Operations
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/amba/pl330.h>
-#include <linux/scatterlist.h>
-#include <linux/export.h>
-
-#include <mach/dma.h>
-
-#if defined(CONFIG_PL330_DMA)
-#define dma_filter pl330_filter
-#elif defined(CONFIG_S3C64XX_PL080)
-#define dma_filter pl08x_filter_id
-#endif
-
-static unsigned samsung_dmadev_request(enum dma_ch dma_ch,
-				struct samsung_dma_req *param,
-				struct device *dev, char *ch_name)
-{
-	dma_cap_mask_t mask;
-
-	dma_cap_zero(mask);
-	dma_cap_set(param->cap, mask);
-
-	if (dev->of_node)
-		return (unsigned)dma_request_slave_channel(dev, ch_name);
-	else
-		return (unsigned)dma_request_channel(mask, dma_filter,
-							(void *)dma_ch);
-}
-
-static int samsung_dmadev_release(unsigned ch, void *param)
-{
-	dma_release_channel((struct dma_chan *)ch);
-
-	return 0;
-}
-
-static int samsung_dmadev_config(unsigned ch,
-				struct samsung_dma_config *param)
-{
-	struct dma_chan *chan = (struct dma_chan *)ch;
-	struct dma_slave_config slave_config;
-
-	if (param->direction == DMA_DEV_TO_MEM) {
-		memset(&slave_config, 0, sizeof(struct dma_slave_config));
-		slave_config.direction = param->direction;
-		slave_config.src_addr = param->fifo;
-		slave_config.src_addr_width = param->width;
-		slave_config.src_maxburst = 1;
-		dmaengine_slave_config(chan, &slave_config);
-	} else if (param->direction == DMA_MEM_TO_DEV) {
-		memset(&slave_config, 0, sizeof(struct dma_slave_config));
-		slave_config.direction = param->direction;
-		slave_config.dst_addr = param->fifo;
-		slave_config.dst_addr_width = param->width;
-		slave_config.dst_maxburst = 1;
-		dmaengine_slave_config(chan, &slave_config);
-	} else {
-		pr_warn("unsupported direction\n");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int samsung_dmadev_prepare(unsigned ch,
-			struct samsung_dma_prep *param)
-{
-	struct scatterlist sg;
-	struct dma_chan *chan = (struct dma_chan *)ch;
-	struct dma_async_tx_descriptor *desc;
-
-	switch (param->cap) {
-	case DMA_SLAVE:
-		sg_init_table(&sg, 1);
-		sg_dma_len(&sg) = param->len;
-		sg_set_page(&sg, pfn_to_page(PFN_DOWN(param->buf)),
-			    param->len, offset_in_page(param->buf));
-		sg_dma_address(&sg) = param->buf;
-
-		desc = dmaengine_prep_slave_sg(chan,
-			&sg, 1, param->direction, DMA_PREP_INTERRUPT);
-		break;
-	case DMA_CYCLIC:
-		desc = dmaengine_prep_dma_cyclic(chan, param->buf,
-			param->len, param->period, param->direction,
-			DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
-		break;
-	default:
-		dev_err(&chan->dev->device, "unsupported format\n");
-		return -EFAULT;
-	}
-
-	if (!desc) {
-		dev_err(&chan->dev->device, "cannot prepare cyclic dma\n");
-		return -EFAULT;
-	}
-
-	desc->callback = param->fp;
-	desc->callback_param = param->fp_param;
-
-	dmaengine_submit((struct dma_async_tx_descriptor *)desc);
-
-	return 0;
-}
-
-static inline int samsung_dmadev_trigger(unsigned ch)
-{
-	dma_async_issue_pending((struct dma_chan *)ch);
-
-	return 0;
-}
-
-static inline int samsung_dmadev_flush(unsigned ch)
-{
-	return dmaengine_terminate_all((struct dma_chan *)ch);
-}
-
-static struct samsung_dma_ops dmadev_ops = {
-	.request	= samsung_dmadev_request,
-	.release	= samsung_dmadev_release,
-	.config		= samsung_dmadev_config,
-	.prepare	= samsung_dmadev_prepare,
-	.trigger	= samsung_dmadev_trigger,
-	.started	= NULL,
-	.flush		= samsung_dmadev_flush,
-	.stop		= samsung_dmadev_flush,
-};
-
-void *samsung_dmadev_get_ops(void)
-{
-	return &dmadev_ops;
-}
-EXPORT_SYMBOL(samsung_dmadev_get_ops);
diff --git a/arch/arm/plat-samsung/dma.c b/arch/arm/plat-samsung/dma.c
deleted file mode 100644
index 6143aa147688..000000000000
--- a/arch/arm/plat-samsung/dma.c
+++ /dev/null
@@ -1,84 +0,0 @@
-/* linux/arch/arm/plat-samsung/dma.c
- *
- * Copyright (c) 2003-2009 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C DMA core
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-struct s3c2410_dma_buf;
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/errno.h>
-
-#include <mach/dma.h>
-#include <mach/irqs.h>
-
-/* dma channel state information */
-struct s3c2410_dma_chan s3c2410_chans[S3C_DMA_CHANNELS];
-struct s3c2410_dma_chan *s3c_dma_chan_map[DMACH_MAX];
-
-/* s3c_dma_lookup_channel
- *
- * change the dma channel number given into a real dma channel id
-*/
-
-struct s3c2410_dma_chan *s3c_dma_lookup_channel(unsigned int channel)
-{
-	if (channel & DMACH_LOW_LEVEL)
-		return &s3c2410_chans[channel & ~DMACH_LOW_LEVEL];
-	else
-		return s3c_dma_chan_map[channel];
-}
-
-/* do we need to protect the settings of the fields from
- * irq?
-*/
-
-int s3c2410_dma_set_opfn(enum dma_ch channel, s3c2410_dma_opfn_t rtn)
-{
-	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	pr_debug("%s: chan=%p, op rtn=%p\n", __func__, chan, rtn);
-
-	chan->op_fn = rtn;
-
-	return 0;
-}
-EXPORT_SYMBOL(s3c2410_dma_set_opfn);
-
-int s3c2410_dma_set_buffdone_fn(enum dma_ch channel, s3c2410_dma_cbfn_t rtn)
-{
-	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	pr_debug("%s: chan=%p, callback rtn=%p\n", __func__, chan, rtn);
-
-	chan->callback_fn = rtn;
-
-	return 0;
-}
-EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn);
-
-int s3c2410_dma_setflags(enum dma_ch channel, unsigned int flags)
-{
-	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	chan->flags = flags;
-	return 0;
-}
-EXPORT_SYMBOL(s3c2410_dma_setflags);
diff --git a/arch/arm/plat-samsung/include/plat/dma-core.h b/arch/arm/plat-samsung/include/plat/dma-core.h
deleted file mode 100644
index 32ff2a92cb3c..000000000000
--- a/arch/arm/plat-samsung/include/plat/dma-core.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* arch/arm/plat-s3c/include/plat/dma.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * Samsung S3C DMA core support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-extern struct s3c2410_dma_chan *s3c_dma_lookup_channel(unsigned int channel);
-
-extern struct s3c2410_dma_chan *s3c_dma_chan_map[];
-
-/* the currently allocated channel information */
-extern struct s3c2410_dma_chan s3c2410_chans[];
-
-
diff --git a/arch/arm/plat-samsung/include/plat/dma-ops.h b/arch/arm/plat-samsung/include/plat/dma-ops.h
deleted file mode 100644
index ce6d7634b6cb..000000000000
--- a/arch/arm/plat-samsung/include/plat/dma-ops.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/dma-ops.h
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung DMA support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __SAMSUNG_DMA_OPS_H_
-#define __SAMSUNG_DMA_OPS_H_ __FILE__
-
-#include <linux/dmaengine.h>
-#include <mach/dma.h>
-
-struct samsung_dma_req {
-	enum dma_transaction_type cap;
-	struct s3c2410_dma_client *client;
-};
-
-struct samsung_dma_prep {
-	enum dma_transaction_type cap;
-	enum dma_transfer_direction direction;
-	dma_addr_t buf;
-	unsigned long period;
-	unsigned long len;
-	void (*fp)(void *data);
-	void *fp_param;
-};
-
-struct samsung_dma_config {
-	enum dma_transfer_direction direction;
-	enum dma_slave_buswidth width;
-	dma_addr_t fifo;
-};
-
-struct samsung_dma_ops {
-	unsigned (*request)(enum dma_ch ch, struct samsung_dma_req *param,
-				struct device *dev, char *ch_name);
-	int (*release)(unsigned ch, void *param);
-	int (*config)(unsigned ch, struct samsung_dma_config *param);
-	int (*prepare)(unsigned ch, struct samsung_dma_prep *param);
-	int (*trigger)(unsigned ch);
-	int (*started)(unsigned ch);
-	int (*flush)(unsigned ch);
-	int (*stop)(unsigned ch);
-};
-
-extern void *samsung_dmadev_get_ops(void);
-extern void *s3c_dma_get_ops(void);
-
-static inline void *__samsung_dma_get_ops(void)
-{
-	if (samsung_dma_is_dmadev())
-		return samsung_dmadev_get_ops();
-	else
-		return s3c_dma_get_ops();
-}
-
-/*
- * samsung_dma_get_ops
- * get the set of samsung dma operations
- */
-#define samsung_dma_get_ops() __samsung_dma_get_ops()
-
-#endif /* __SAMSUNG_DMA_OPS_H_ */
diff --git a/arch/arm/plat-samsung/include/plat/dma-pl330.h b/arch/arm/plat-samsung/include/plat/dma-pl330.h
deleted file mode 100644
index abe07fae71db..000000000000
--- a/arch/arm/plat-samsung/include/plat/dma-pl330.h
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __DMA_PL330_H_
-#define __DMA_PL330_H_ __FILE__
-
-/*
- * PL330 can assign any channel to communicate with
- * any of the peripherals attched to the DMAC.
- * For the sake of consistency across client drivers,
- * We keep the channel names unchanged and only add
- * missing peripherals are added.
- * Order is not important since DMA PL330 API driver
- * use these just as IDs.
- */
-enum dma_ch {
-	DMACH_UART0_RX = 0,
-	DMACH_UART0_TX,
-	DMACH_UART1_RX,
-	DMACH_UART1_TX,
-	DMACH_UART2_RX,
-	DMACH_UART2_TX,
-	DMACH_UART3_RX,
-	DMACH_UART3_TX,
-	DMACH_UART4_RX,
-	DMACH_UART4_TX,
-	DMACH_UART5_RX,
-	DMACH_UART5_TX,
-	DMACH_USI_RX,
-	DMACH_USI_TX,
-	DMACH_IRDA,
-	DMACH_I2S0_RX,
-	DMACH_I2S0_TX,
-	DMACH_I2S0S_TX,
-	DMACH_I2S1_RX,
-	DMACH_I2S1_TX,
-	DMACH_I2S2_RX,
-	DMACH_I2S2_TX,
-	DMACH_SPI0_RX,
-	DMACH_SPI0_TX,
-	DMACH_SPI1_RX,
-	DMACH_SPI1_TX,
-	DMACH_SPI2_RX,
-	DMACH_SPI2_TX,
-	DMACH_AC97_MICIN,
-	DMACH_AC97_PCMIN,
-	DMACH_AC97_PCMOUT,
-	DMACH_EXTERNAL,
-	DMACH_PWM,
-	DMACH_SPDIF,
-	DMACH_HSI_RX,
-	DMACH_HSI_TX,
-	DMACH_PCM0_TX,
-	DMACH_PCM0_RX,
-	DMACH_PCM1_TX,
-	DMACH_PCM1_RX,
-	DMACH_PCM2_TX,
-	DMACH_PCM2_RX,
-	DMACH_MSM_REQ3,
-	DMACH_MSM_REQ2,
-	DMACH_MSM_REQ1,
-	DMACH_MSM_REQ0,
-	DMACH_SLIMBUS0_RX,
-	DMACH_SLIMBUS0_TX,
-	DMACH_SLIMBUS0AUX_RX,
-	DMACH_SLIMBUS0AUX_TX,
-	DMACH_SLIMBUS1_RX,
-	DMACH_SLIMBUS1_TX,
-	DMACH_SLIMBUS2_RX,
-	DMACH_SLIMBUS2_TX,
-	DMACH_SLIMBUS3_RX,
-	DMACH_SLIMBUS3_TX,
-	DMACH_SLIMBUS4_RX,
-	DMACH_SLIMBUS4_TX,
-	DMACH_SLIMBUS5_RX,
-	DMACH_SLIMBUS5_TX,
-	DMACH_MIPI_HSI0,
-	DMACH_MIPI_HSI1,
-	DMACH_MIPI_HSI2,
-	DMACH_MIPI_HSI3,
-	DMACH_MIPI_HSI4,
-	DMACH_MIPI_HSI5,
-	DMACH_MIPI_HSI6,
-	DMACH_MIPI_HSI7,
-	DMACH_DISP1,
-	DMACH_MTOM_0,
-	DMACH_MTOM_1,
-	DMACH_MTOM_2,
-	DMACH_MTOM_3,
-	DMACH_MTOM_4,
-	DMACH_MTOM_5,
-	DMACH_MTOM_6,
-	DMACH_MTOM_7,
-	/* END Marker, also used to denote a reserved channel */
-	DMACH_MAX,
-};
-
-struct s3c2410_dma_client {
-	char	*name;
-};
-
-static inline bool samsung_dma_has_circular(void)
-{
-	return true;
-}
-
-static inline bool samsung_dma_is_dmadev(void)
-{
-	return true;
-}
-
-#include <plat/dma-ops.h>
-
-#endif	/* __DMA_PL330_H_ */
diff --git a/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h b/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
deleted file mode 100644
index bd3a6db14cbb..000000000000
--- a/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
- *
- * Copyright (C) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Samsung S3C24XX DMA support - per SoC functions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <plat/dma-core.h>
-
-extern struct bus_type dma_subsys;
-extern struct s3c2410_dma_chan s3c2410_chans[S3C_DMA_CHANNELS];
-
-#define DMA_CH_VALID		(1<<31)
-#define DMA_CH_NEVER		(1<<30)
-
-/* struct s3c24xx_dma_map
- *
- * this holds the mapping information for the channel selected
- * to be connected to the specified device
-*/
-
-struct s3c24xx_dma_map {
-	const char		*name;
-
-	unsigned long		 channels[S3C_DMA_CHANNELS];
-};
-
-struct s3c24xx_dma_selection {
-	struct s3c24xx_dma_map	*map;
-	unsigned long		 map_size;
-	unsigned long		 dcon_mask;
-
-	void	(*select)(struct s3c2410_dma_chan *chan,
-			  struct s3c24xx_dma_map *map);
-};
-
-extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel);
-
-/* struct s3c24xx_dma_order_ch
- *
- * channel map for one of the `enum dma_ch` dma channels. the list
- * entry contains a set of low-level channel numbers, orred with
- * DMA_CH_VALID, which are checked in the order in the array.
-*/
-
-struct s3c24xx_dma_order_ch {
-	unsigned int	list[S3C_DMA_CHANNELS];	/* list of channels */
-	unsigned int	flags;				/* flags */
-};
-
-/* struct s3c24xx_dma_order
- *
- * information provided by either the core or the board to give the
- * dma system a hint on how to allocate channels
-*/
-
-struct s3c24xx_dma_order {
-	struct s3c24xx_dma_order_ch	channels[DMACH_MAX];
-};
-
-extern int s3c24xx_dma_order_set(struct s3c24xx_dma_order *map);
-
-/* DMA init code, called from the cpu support code */
-
-extern int s3c2410_dma_init(void);
-
-extern int s3c24xx_dma_init(unsigned int channels, unsigned int irq,
-			    unsigned int stride);
diff --git a/arch/arm/plat-samsung/include/plat/dma.h b/arch/arm/plat-samsung/include/plat/dma.h
deleted file mode 100644
index 7b02143ccd9a..000000000000
--- a/arch/arm/plat-samsung/include/plat/dma.h
+++ /dev/null
@@ -1,130 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/dma.h
- *
- * Copyright (C) 2003-2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Samsung S3C DMA support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_DMA_H
-#define __PLAT_DMA_H
-
-#include <linux/dma-mapping.h>
-
-enum s3c2410_dma_buffresult {
-	S3C2410_RES_OK,
-	S3C2410_RES_ERR,
-	S3C2410_RES_ABORT
-};
-
-/* enum s3c2410_chan_op
- *
- * operation codes passed to the DMA code by the user, and also used
- * to inform the current channel owner of any changes to the system state
-*/
-
-enum s3c2410_chan_op {
-	S3C2410_DMAOP_START,
-	S3C2410_DMAOP_STOP,
-	S3C2410_DMAOP_PAUSE,
-	S3C2410_DMAOP_RESUME,
-	S3C2410_DMAOP_FLUSH,
-	S3C2410_DMAOP_TIMEOUT,		/* internal signal to handler */
-	S3C2410_DMAOP_STARTED,		/* indicate channel started */
-};
-
-struct s3c2410_dma_client {
-	char                *name;
-};
-
-struct s3c2410_dma_chan;
-enum dma_ch;
-
-/* s3c2410_dma_cbfn_t
- *
- * buffer callback routine type
-*/
-
-typedef void (*s3c2410_dma_cbfn_t)(struct s3c2410_dma_chan *,
-				   void *buf, int size,
-				   enum s3c2410_dma_buffresult result);
-
-typedef int  (*s3c2410_dma_opfn_t)(struct s3c2410_dma_chan *,
-				   enum s3c2410_chan_op );
-
-
-
-/* s3c2410_dma_request
- *
- * request a dma channel exclusivley
-*/
-
-extern int s3c2410_dma_request(enum dma_ch channel,
-			       struct s3c2410_dma_client *, void *dev);
-
-
-/* s3c2410_dma_ctrl
- *
- * change the state of the dma channel
-*/
-
-extern int s3c2410_dma_ctrl(enum dma_ch channel, enum s3c2410_chan_op op);
-
-/* s3c2410_dma_setflags
- *
- * set the channel's flags to a given state
-*/
-
-extern int s3c2410_dma_setflags(enum dma_ch channel,
-				unsigned int flags);
-
-/* s3c2410_dma_free
- *
- * free the dma channel (will also abort any outstanding operations)
-*/
-
-extern int s3c2410_dma_free(enum dma_ch channel, struct s3c2410_dma_client *);
-
-/* s3c2410_dma_enqueue
- *
- * place the given buffer onto the queue of operations for the channel.
- * The buffer must be allocated from dma coherent memory, or the Dcache/WB
- * drained before the buffer is given to the DMA system.
-*/
-
-extern int s3c2410_dma_enqueue(enum dma_ch channel, void *id,
-			       dma_addr_t data, int size);
-
-/* s3c2410_dma_config
- *
- * configure the dma channel
-*/
-
-extern int s3c2410_dma_config(enum dma_ch channel, int xferunit);
-
-/* s3c2410_dma_devconfig
- *
- * configure the device we're talking to
-*/
-
-extern int s3c2410_dma_devconfig(enum dma_ch channel,
-		enum dma_data_direction source, unsigned long devaddr);
-
-/* s3c2410_dma_getposition
- *
- * get the position that the dma transfer is currently at
-*/
-
-extern int s3c2410_dma_getposition(enum dma_ch channel,
-				   dma_addr_t *src, dma_addr_t *dest);
-
-extern int s3c2410_dma_set_opfn(enum dma_ch, s3c2410_dma_opfn_t rtn);
-extern int s3c2410_dma_set_buffdone_fn(enum dma_ch, s3c2410_dma_cbfn_t rtn);
-
-#include <plat/dma-ops.h>
-
-#endif
diff --git a/arch/arm/plat-samsung/include/plat/regs-dma.h b/arch/arm/plat-samsung/include/plat/regs-dma.h
deleted file mode 100644
index a7d622ef16af..000000000000
--- a/arch/arm/plat-samsung/include/plat/regs-dma.h
+++ /dev/null
@@ -1,151 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/regs-dma.h
- *
- * Copyright (C) 2003-2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Samsung S3C24XX DMA support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_REGS_DMA_H
-#define __ASM_PLAT_REGS_DMA_H __FILE__
-
-#define S3C2410_DMA_DISRC		(0x00)
-#define S3C2410_DMA_DISRCC		(0x04)
-#define S3C2410_DMA_DIDST		(0x08)
-#define S3C2410_DMA_DIDSTC		(0x0C)
-#define S3C2410_DMA_DCON		(0x10)
-#define S3C2410_DMA_DSTAT		(0x14)
-#define S3C2410_DMA_DCSRC		(0x18)
-#define S3C2410_DMA_DCDST		(0x1C)
-#define S3C2410_DMA_DMASKTRIG		(0x20)
-#define S3C2412_DMA_DMAREQSEL		(0x24)
-#define S3C2443_DMA_DMAREQSEL		(0x24)
-
-#define S3C2410_DISRCC_INC		(1 << 0)
-#define S3C2410_DISRCC_APB		(1 << 1)
-
-#define S3C2410_DMASKTRIG_STOP		(1 << 2)
-#define S3C2410_DMASKTRIG_ON		(1 << 1)
-#define S3C2410_DMASKTRIG_SWTRIG	(1 << 0)
-
-#define S3C2410_DCON_DEMAND		(0 << 31)
-#define S3C2410_DCON_HANDSHAKE		(1 << 31)
-#define S3C2410_DCON_SYNC_PCLK		(0 << 30)
-#define S3C2410_DCON_SYNC_HCLK		(1 << 30)
-
-#define S3C2410_DCON_INTREQ		(1 << 29)
-
-#define S3C2410_DCON_CH0_XDREQ0		(0 << 24)
-#define S3C2410_DCON_CH0_UART0		(1 << 24)
-#define S3C2410_DCON_CH0_SDI		(2 << 24)
-#define S3C2410_DCON_CH0_TIMER		(3 << 24)
-#define S3C2410_DCON_CH0_USBEP1		(4 << 24)
-
-#define S3C2410_DCON_CH1_XDREQ1		(0 << 24)
-#define S3C2410_DCON_CH1_UART1		(1 << 24)
-#define S3C2410_DCON_CH1_I2SSDI		(2 << 24)
-#define S3C2410_DCON_CH1_SPI		(3 << 24)
-#define S3C2410_DCON_CH1_USBEP2		(4 << 24)
-
-#define S3C2410_DCON_CH2_I2SSDO		(0 << 24)
-#define S3C2410_DCON_CH2_I2SSDI		(1 << 24)
-#define S3C2410_DCON_CH2_SDI		(2 << 24)
-#define S3C2410_DCON_CH2_TIMER		(3 << 24)
-#define S3C2410_DCON_CH2_USBEP3		(4 << 24)
-
-#define S3C2410_DCON_CH3_UART2		(0 << 24)
-#define S3C2410_DCON_CH3_SDI		(1 << 24)
-#define S3C2410_DCON_CH3_SPI		(2 << 24)
-#define S3C2410_DCON_CH3_TIMER		(3 << 24)
-#define S3C2410_DCON_CH3_USBEP4		(4 << 24)
-
-#define S3C2410_DCON_SRCSHIFT		(24)
-#define S3C2410_DCON_SRCMASK		(7 << 24)
-
-#define S3C2410_DCON_BYTE		(0 << 20)
-#define S3C2410_DCON_HALFWORD		(1 << 20)
-#define S3C2410_DCON_WORD		(2 << 20)
-
-#define S3C2410_DCON_AUTORELOAD		(0 << 22)
-#define S3C2410_DCON_NORELOAD		(1 << 22)
-#define S3C2410_DCON_HWTRIG		(1 << 23)
-
-#ifdef CONFIG_CPU_S3C2440
-
-#define S3C2440_DIDSTC_CHKINT		(1 << 2)
-
-#define S3C2440_DCON_CH0_I2SSDO		(5 << 24)
-#define S3C2440_DCON_CH0_PCMIN		(6 << 24)
-
-#define S3C2440_DCON_CH1_PCMOUT		(5 << 24)
-#define S3C2440_DCON_CH1_SDI		(6 << 24)
-
-#define S3C2440_DCON_CH2_PCMIN		(5 << 24)
-#define S3C2440_DCON_CH2_MICIN		(6 << 24)
-
-#define S3C2440_DCON_CH3_MICIN		(5 << 24)
-#define S3C2440_DCON_CH3_PCMOUT		(6 << 24)
-#endif /* CONFIG_CPU_S3C2440 */
-
-#ifdef CONFIG_CPU_S3C2412
-
-#define S3C2412_DMAREQSEL_SRC(x)	((x) << 1)
-
-#define S3C2412_DMAREQSEL_HW		(1)
-
-#define S3C2412_DMAREQSEL_SPI0TX	S3C2412_DMAREQSEL_SRC(0)
-#define S3C2412_DMAREQSEL_SPI0RX	S3C2412_DMAREQSEL_SRC(1)
-#define S3C2412_DMAREQSEL_SPI1TX	S3C2412_DMAREQSEL_SRC(2)
-#define S3C2412_DMAREQSEL_SPI1RX	S3C2412_DMAREQSEL_SRC(3)
-#define S3C2412_DMAREQSEL_I2STX		S3C2412_DMAREQSEL_SRC(4)
-#define S3C2412_DMAREQSEL_I2SRX		S3C2412_DMAREQSEL_SRC(5)
-#define S3C2412_DMAREQSEL_TIMER		S3C2412_DMAREQSEL_SRC(9)
-#define S3C2412_DMAREQSEL_SDI		S3C2412_DMAREQSEL_SRC(10)
-#define S3C2412_DMAREQSEL_USBEP1	S3C2412_DMAREQSEL_SRC(13)
-#define S3C2412_DMAREQSEL_USBEP2	S3C2412_DMAREQSEL_SRC(14)
-#define S3C2412_DMAREQSEL_USBEP3	S3C2412_DMAREQSEL_SRC(15)
-#define S3C2412_DMAREQSEL_USBEP4	S3C2412_DMAREQSEL_SRC(16)
-#define S3C2412_DMAREQSEL_XDREQ0	S3C2412_DMAREQSEL_SRC(17)
-#define S3C2412_DMAREQSEL_XDREQ1	S3C2412_DMAREQSEL_SRC(18)
-#define S3C2412_DMAREQSEL_UART0_0	S3C2412_DMAREQSEL_SRC(19)
-#define S3C2412_DMAREQSEL_UART0_1	S3C2412_DMAREQSEL_SRC(20)
-#define S3C2412_DMAREQSEL_UART1_0	S3C2412_DMAREQSEL_SRC(21)
-#define S3C2412_DMAREQSEL_UART1_1	S3C2412_DMAREQSEL_SRC(22)
-#define S3C2412_DMAREQSEL_UART2_0	S3C2412_DMAREQSEL_SRC(23)
-#define S3C2412_DMAREQSEL_UART2_1	S3C2412_DMAREQSEL_SRC(24)
-#endif /* CONFIG_CPU_S3C2412 */
-
-#if defined(CONFIG_CPU_S3C2416) || defined(CONFIG_CPU_S3C2443)
-
-#define S3C2443_DMAREQSEL_SRC(x)	((x) << 1)
-
-#define S3C2443_DMAREQSEL_HW		(1)
-
-#define S3C2443_DMAREQSEL_SPI0TX	S3C2443_DMAREQSEL_SRC(0)
-#define S3C2443_DMAREQSEL_SPI0RX	S3C2443_DMAREQSEL_SRC(1)
-#define S3C2443_DMAREQSEL_SPI1TX	S3C2443_DMAREQSEL_SRC(2)
-#define S3C2443_DMAREQSEL_SPI1RX	S3C2443_DMAREQSEL_SRC(3)
-#define S3C2443_DMAREQSEL_I2STX		S3C2443_DMAREQSEL_SRC(4)
-#define S3C2443_DMAREQSEL_I2SRX		S3C2443_DMAREQSEL_SRC(5)
-#define S3C2443_DMAREQSEL_TIMER		S3C2443_DMAREQSEL_SRC(9)
-#define S3C2443_DMAREQSEL_SDI		S3C2443_DMAREQSEL_SRC(10)
-#define S3C2443_DMAREQSEL_XDREQ0	S3C2443_DMAREQSEL_SRC(17)
-#define S3C2443_DMAREQSEL_XDREQ1	S3C2443_DMAREQSEL_SRC(18)
-#define S3C2443_DMAREQSEL_UART0_0	S3C2443_DMAREQSEL_SRC(19)
-#define S3C2443_DMAREQSEL_UART0_1	S3C2443_DMAREQSEL_SRC(20)
-#define S3C2443_DMAREQSEL_UART1_0	S3C2443_DMAREQSEL_SRC(21)
-#define S3C2443_DMAREQSEL_UART1_1	S3C2443_DMAREQSEL_SRC(22)
-#define S3C2443_DMAREQSEL_UART2_0	S3C2443_DMAREQSEL_SRC(23)
-#define S3C2443_DMAREQSEL_UART2_1	S3C2443_DMAREQSEL_SRC(24)
-#define S3C2443_DMAREQSEL_UART3_0	S3C2443_DMAREQSEL_SRC(25)
-#define S3C2443_DMAREQSEL_UART3_1	S3C2443_DMAREQSEL_SRC(26)
-#define S3C2443_DMAREQSEL_PCMOUT	S3C2443_DMAREQSEL_SRC(27)
-#define S3C2443_DMAREQSEL_PCMIN		S3C2443_DMAREQSEL_SRC(28)
-#define S3C2443_DMAREQSEL_MICIN		S3C2443_DMAREQSEL_SRC(29)
-#endif /* CONFIG_CPU_S3C2443 */
-
-#endif /* __ASM_PLAT_REGS_DMA_H */
diff --git a/arch/arm/plat-samsung/s3c-dma-ops.c b/arch/arm/plat-samsung/s3c-dma-ops.c
deleted file mode 100644
index 98b10ba67dc7..000000000000
--- a/arch/arm/plat-samsung/s3c-dma-ops.c
+++ /dev/null
@@ -1,146 +0,0 @@
-/* linux/arch/arm/plat-samsung/s3c-dma-ops.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung S3C-DMA Operations
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/slab.h>
-#include <linux/types.h>
-#include <linux/export.h>
-
-#include <mach/dma.h>
-
-struct cb_data {
-	void (*fp) (void *);
-	void *fp_param;
-	unsigned ch;
-	struct list_head node;
-};
-
-static LIST_HEAD(dma_list);
-
-static void s3c_dma_cb(struct s3c2410_dma_chan *channel, void *param,
-		       int size, enum s3c2410_dma_buffresult res)
-{
-	struct cb_data *data = param;
-
-	data->fp(data->fp_param);
-}
-
-static unsigned s3c_dma_request(enum dma_ch dma_ch,
-				struct samsung_dma_req *param,
-				struct device *dev, char *ch_name)
-{
-	struct cb_data *data;
-
-	if (s3c2410_dma_request(dma_ch, param->client, NULL) < 0) {
-		s3c2410_dma_free(dma_ch, param->client);
-		return 0;
-	}
-
-	if (param->cap == DMA_CYCLIC)
-		s3c2410_dma_setflags(dma_ch, S3C2410_DMAF_CIRCULAR);
-
-	data = kzalloc(sizeof(struct cb_data), GFP_KERNEL);
-	data->ch = dma_ch;
-	list_add_tail(&data->node, &dma_list);
-
-	return (unsigned)dma_ch;
-}
-
-static int s3c_dma_release(unsigned ch, void *param)
-{
-	struct cb_data *data;
-
-	list_for_each_entry(data, &dma_list, node)
-		if (data->ch == ch)
-			break;
-	list_del(&data->node);
-
-	s3c2410_dma_free(ch, param);
-	kfree(data);
-
-	return 0;
-}
-
-static int s3c_dma_config(unsigned ch, struct samsung_dma_config *param)
-{
-	s3c2410_dma_devconfig(ch, param->direction, param->fifo);
-	s3c2410_dma_config(ch, param->width);
-
-	return 0;
-}
-
-static int s3c_dma_prepare(unsigned ch, struct samsung_dma_prep *param)
-{
-	struct cb_data *data;
-	dma_addr_t pos = param->buf;
-	dma_addr_t end = param->buf + param->len;
-
-	list_for_each_entry(data, &dma_list, node)
-		if (data->ch == ch)
-			break;
-
-	if (!data->fp) {
-		s3c2410_dma_set_buffdone_fn(ch, s3c_dma_cb);
-		data->fp = param->fp;
-		data->fp_param = param->fp_param;
-	}
-
-	if (param->cap != DMA_CYCLIC) {
-		s3c2410_dma_enqueue(ch, (void *)data, param->buf, param->len);
-		return 0;
-	}
-
-	while (pos < end) {
-		s3c2410_dma_enqueue(ch, (void *)data, pos, param->period);
-		pos += param->period;
-	}
-
-	return 0;
-}
-
-static inline int s3c_dma_trigger(unsigned ch)
-{
-	return s3c2410_dma_ctrl(ch, S3C2410_DMAOP_START);
-}
-
-static inline int s3c_dma_started(unsigned ch)
-{
-	return s3c2410_dma_ctrl(ch, S3C2410_DMAOP_STARTED);
-}
-
-static inline int s3c_dma_flush(unsigned ch)
-{
-	return s3c2410_dma_ctrl(ch, S3C2410_DMAOP_FLUSH);
-}
-
-static inline int s3c_dma_stop(unsigned ch)
-{
-	return s3c2410_dma_ctrl(ch, S3C2410_DMAOP_STOP);
-}
-
-static struct samsung_dma_ops s3c_dma_ops = {
-	.request	= s3c_dma_request,
-	.release	= s3c_dma_release,
-	.config		= s3c_dma_config,
-	.prepare	= s3c_dma_prepare,
-	.trigger	= s3c_dma_trigger,
-	.started	= s3c_dma_started,
-	.flush		= s3c_dma_flush,
-	.stop		= s3c_dma_stop,
-};
-
-void *s3c_dma_get_ops(void)
-{
-	return &s3c_dma_ops;
-}
-EXPORT_SYMBOL(s3c_dma_get_ops);