diff options
Diffstat (limited to 'arch/arm64/Kconfig.platforms')
| -rw-r--r-- | arch/arm64/Kconfig.platforms | 104 |
1 files changed, 68 insertions, 36 deletions
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms index 7d5d58800170..76580b932e44 100644 --- a/arch/arm64/Kconfig.platforms +++ b/arch/arm64/Kconfig.platforms @@ -11,12 +11,11 @@ config ARCH_ACTIONS config ARCH_SUNXI bool "Allwinner sunxi 64-bit SoC Family" select ARCH_HAS_RESET_CONTROLLER - select GENERIC_IRQ_CHIP - select IRQ_DOMAIN_HIERARCHY - select IRQ_FASTEOI_HIERARCHY_HANDLERS select PINCTRL select RESET_CONTROLLER select SUN4I_TIMER + select SUN6I_R_INTC + select SUNXI_NMI_INTC help This enables support for Allwinner sunxi based SoCs like the A64. @@ -34,6 +33,11 @@ config ARCH_APPLE This enables support for Apple's in-house ARM SoC family, starting with the Apple M1. +menuconfig ARCH_BCM + bool "Broadcom SoC Support" + +if ARCH_BCM + config ARCH_BCM2835 bool "Broadcom BCM2835 family" select TIMER_OF @@ -48,14 +52,6 @@ config ARCH_BCM2835 This enables support for the Broadcom BCM2837 and BCM2711 SoC. These SoCs are used in the Raspberry Pi 3 and 4 devices. -config ARCH_BCM4908 - bool "Broadcom BCM4908 family" - select GPIOLIB - help - This enables support for the Broadcom BCM4906, BCM4908 and - BCM49408 SoCs. These SoCs use Brahma-B53 cores and can be - found in home routers. - config ARCH_BCM_IPROC bool "Broadcom iProc SoC Family" select COMMON_CLK_IPROC @@ -64,6 +60,26 @@ config ARCH_BCM_IPROC help This enables support for Broadcom iProc based SoCs +config ARCH_BCMBCA + bool "Broadcom Broadband Carrier Access (BCA) origin SoC" + select GPIOLIB + help + Say Y if you intend to run the kernel on a Broadcom Broadband ARM-based + BCA chipset. + + This enables support for Broadcom BCA ARM-based broadband chipsets, + including the DSL, PON and Wireless family of chips. + +config ARCH_BRCMSTB + bool "Broadcom Set-Top-Box SoCs" + select ARCH_HAS_RESET_CONTROLLER + select GENERIC_IRQ_CHIP + select PINCTRL + help + This enables support for Broadcom's ARMv8 Set Top Box SoCs + +endif + config ARCH_BERLIN bool "Marvell Berlin SoC Family" select DW_APB_ICTL @@ -78,14 +94,6 @@ config ARCH_BITMAIN help This enables support for the Bitmain SoC Family. -config ARCH_BRCMSTB - bool "Broadcom Set-Top-Box SoCs" - select ARCH_HAS_RESET_CONTROLLER - select GENERIC_IRQ_CHIP - select PINCTRL - help - This enables support for Broadcom's ARMv8 Set Top Box SoCs - config ARCH_EXYNOS bool "ARMv8 based Samsung Exynos SoC family" select COMMON_CLK_SAMSUNG @@ -127,12 +135,6 @@ config ARCH_K3 This enables support for Texas Instruments' K3 multicore SoC architecture. -config ARCH_LAYERSCAPE - bool "ARMv8 based Freescale Layerscape SoC family" - select EDAC_SUPPORT - help - This enables support for the Freescale Layerscape SoC family. - config ARCH_LG1K bool "LG Electronics LG1K SoC Family" help @@ -183,11 +185,24 @@ config ARCH_MVEBU select PINCTRL_ARMADA_37XX select PINCTRL_ARMADA_AP806 select PINCTRL_ARMADA_CP110 + select PINCTRL_AC5 help This enables support for Marvell EBU familly, including: - Armada 3700 SoC Family - Armada 7K SoC Family - Armada 8K SoC Family + - 98DX2530 SoC Family + +menuconfig ARCH_NXP + bool "NXP SoC support" + +if ARCH_NXP + +config ARCH_LAYERSCAPE + bool "ARMv8 based Freescale Layerscape SoC family" + select EDAC_SUPPORT + help + This enables support for the Freescale Layerscape SoC family. config ARCH_MXC bool "ARMv8 based NXP i.MX SoC family" @@ -203,6 +218,24 @@ config ARCH_MXC This enables support for the ARMv8 based SoCs in the NXP i.MX family. +config ARCH_S32 + bool "NXP S32 SoC Family" + help + This enables support for the NXP S32 family of processors. + +endif + +config ARCH_NPCM + bool "Nuvoton NPCM Architecture" + select PINCTRL + select GPIOLIB + select NPCM7XX_TIMER + select RESET_CONTROLLER + select MFD_SYSCON + help + General support for NPCM8xx BMC (Arbel). + Nuvoton NPCM8xx BMC based on the Cortex A35. + config ARCH_QCOM bool "Qualcomm Platforms" select GPIOLIB @@ -221,7 +254,6 @@ config ARCH_RENESAS bool "Renesas SoC Platforms" select GPIOLIB select PINCTRL - select SOC_BUS help This enables support for the ARMv8 based Renesas SoCs. @@ -235,11 +267,6 @@ config ARCH_ROCKCHIP This enables support for the ARMv8 based Rockchip chipsets, like the RK3368. -config ARCH_S32 - bool "NXP S32 SoC Family" - help - This enables support for the NXP S32 family of processors. - config ARCH_SEATTLE bool "AMD Seattle SoC Family" help @@ -249,10 +276,12 @@ config ARCH_INTEL_SOCFPGA bool "Intel's SoCFPGA ARMv8 Families" help This enables support for Intel's SoCFPGA ARMv8 families: - Stratix 10 (ex. Altera), Agilex and eASIC N5X. + Stratix 10 (ex. Altera), Stratix10 Software Virtual Platform, + Agilex and eASIC N5X. config ARCH_SYNQUACER bool "Socionext SynQuacer SoC Family" + select IRQ_FASTEOI_HIERARCHY_HANDLERS config ARCH_TEGRA bool "NVIDIA Tegra SoC Family" @@ -268,6 +297,12 @@ config ARCH_TEGRA help This enables support for the NVIDIA Tegra SoC family. +config ARCH_TESLA_FSD + bool "ARMv8 based Tesla platform" + depends on ARCH_EXYNOS + help + Support for ARMv8 based Tesla platforms. + config ARCH_SPRD bool "Spreadtrum SoC platform" help @@ -309,9 +344,6 @@ config ARCH_VISCONTI help This enables support for Toshiba Visconti SoCs Family. -config ARCH_VULCAN - def_bool n - config ARCH_XGENE bool "AppliedMicro X-Gene SOC Family" help @@ -322,4 +354,4 @@ config ARCH_ZYNQMP help This enables support for Xilinx ZynqMP Family -endmenu +endmenu # "Platform selection" |