diff options
Diffstat (limited to '')
-rw-r--r-- | arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts | 138 |
1 files changed, 10 insertions, 128 deletions
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts index 8f2a80f128de..9a38ff9b3fc7 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts @@ -3,145 +3,27 @@ /dts-v1/; -#include "sun50i-h6.dtsi" -#include "sun50i-h6-cpu-opp.dtsi" - -#include <dt-bindings/gpio/gpio.h> +#include "sun50i-h6-tanix.dtsi" / { model = "Tanix TX6"; compatible = "oranth,tanix-tx6", "allwinner,sun50i-h6"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - connector { - compatible = "hdmi-connector"; - ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */ - type = "a"; - - port { - hdmi_con_in: endpoint { - remote-endpoint = <&hdmi_out_con>; - }; - }; - }; - - reg_vcc1v8: regulator-vcc1v8 { - compatible = "regulator-fixed"; - regulator-name = "vcc1v8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - reg_vcc3v3: regulator-vcc3v3 { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - reg_vdd_cpu_gpu: regulator-vdd-cpu-gpu { - compatible = "regulator-fixed"; - regulator-name = "vdd-cpu-gpu"; - regulator-min-microvolt = <1135000>; - regulator-max-microvolt = <1135000>; - }; -}; - -&cpu0 { - cpu-supply = <®_vdd_cpu_gpu>; -}; - -&de { - status = "okay"; -}; - -&dwc3 { - status = "okay"; -}; - -&ehci0 { - status = "okay"; -}; - -&ehci3 { - status = "okay"; -}; - -&gpu { - mali-supply = <®_vdd_cpu_gpu>; - status = "okay"; -}; - -&hdmi { - status = "okay"; -}; - -&hdmi_out { - hdmi_out_con: endpoint { - remote-endpoint = <&hdmi_con_in>; - }; -}; - -&mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins>; - vmmc-supply = <®_vcc3v3>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; - bus-width = <4>; - status = "okay"; -}; - -&mmc2 { - vmmc-supply = <®_vcc3v3>; - vqmmc-supply = <®_vcc1v8>; - bus-width = <8>; - non-removable; - cap-mmc-hw-reset; - mmc-hs200-1_8v; - status = "okay"; -}; - -&ohci0 { - status = "okay"; -}; - -&ohci3 { - status = "okay"; -}; - -&pio { - vcc-pc-supply = <®_vcc1v8>; - vcc-pd-supply = <®_vcc3v3>; - vcc-pg-supply = <®_vcc1v8>; }; &r_ir { linux,rc-map-name = "rc-tanix-tx5max"; - status = "okay"; }; -&uart0 { +&uart1 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_ph_pins>; + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + uart-has-rtscts; status = "okay"; -}; -&usb2otg { - dr_mode = "host"; - status = "okay"; -}; - -&usb2phy { - status = "okay"; -}; - -&usb3phy { - status = "okay"; + bluetooth { + compatible = "realtek,rtl8822cs-bt"; + device-wake-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */ + host-wake-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /* PM1 */ + enable-gpios = <&r_pio 1 4 GPIO_ACTIVE_HIGH>; /* PM4 */ + }; }; |