diff options
Diffstat (limited to '')
32 files changed, 1846 insertions, 546 deletions
diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile index c6882032a428..05d8c5ecf3b0 100644 --- a/arch/arm64/boot/dts/broadcom/Makefile +++ b/arch/arm64/boot/dts/broadcom/Makefile @@ -5,8 +5,9 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-400.dtb \ bcm2837-rpi-3-a-plus.dtb \ bcm2837-rpi-3-b.dtb \ bcm2837-rpi-3-b-plus.dtb \ - bcm2837-rpi-cm3-io3.dtb + bcm2837-rpi-cm3-io3.dtb \ + bcm2837-rpi-zero-2-w.dtb -subdir-y += bcm4908 +subdir-y += bcmbca subdir-y += northstar2 subdir-y += stingray diff --git a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-zero-2-w.dts b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-zero-2-w.dts new file mode 100644 index 000000000000..307ae693e4a0 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-zero-2-w.dts @@ -0,0 +1,2 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "arm/bcm2837-rpi-zero-2-w.dts" diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/Makefile b/arch/arm64/boot/dts/broadcom/bcm4908/Makefile deleted file mode 100644 index cc75854519ac..000000000000 --- a/arch/arm64/boot/dts/broadcom/bcm4908/Makefile +++ /dev/null @@ -1,4 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -dtb-$(CONFIG_ARCH_BCM4908) += bcm4906-netgear-r8000p.dtb -dtb-$(CONFIG_ARCH_BCM4908) += bcm4906-tplink-archer-c2300-v1.dtb -dtb-$(CONFIG_ARCH_BCM4908) += bcm4908-asus-gt-ac5300.dtb diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi deleted file mode 100644 index 66023d553524..000000000000 --- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi +++ /dev/null @@ -1,18 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "bcm4908.dtsi" - -/ { - cpus { - /delete-node/ cpu@2; - - /delete-node/ cpu@3; - }; - - pmu { - compatible = "arm,cortex-a53-pmu"; - interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - interrupt-affinity = <&cpu0>, <&cpu1>; - }; -}; diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts deleted file mode 100644 index 169fbb7cfd34..000000000000 --- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts +++ /dev/null @@ -1,159 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> - -#include "bcm4908.dtsi" - -/ { - compatible = "asus,gt-ac5300", "brcm,bcm4908"; - model = "Asus GT-AC5300"; - - memory@0 { - device_type = "memory"; - reg = <0x00 0x00 0x00 0x40000000>; - }; - - gpio-keys-polled { - compatible = "gpio-keys-polled"; - poll-interval = <100>; - - wifi { - label = "WiFi"; - linux,code = <KEY_RFKILL>; - gpios = <&gpio0 28 GPIO_ACTIVE_LOW>; - }; - - wps { - label = "WPS"; - linux,code = <KEY_WPS_BUTTON>; - gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; - }; - - restart { - label = "Reset"; - linux,code = <KEY_RESTART>; - gpios = <&gpio0 30 GPIO_ACTIVE_LOW>; - }; - - brightness { - label = "LEDs"; - linux,code = <KEY_BRIGHTNESS_ZERO>; - gpios = <&gpio0 31 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&enet { - nvmem-cells = <&base_mac_addr>; - nvmem-cell-names = "mac-address"; -}; - -&usb_phy { - brcm,ioc = <1>; - status = "okay"; -}; - -&ehci { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; - -&xhci { - status = "okay"; -}; - -&ports { - port@0 { - label = "lan2"; - }; - - port@1 { - label = "lan1"; - }; - - port@2 { - label = "lan6"; - }; - - port@3 { - label = "lan5"; - }; - - /* External BCM53134S switch */ - port@7 { - label = "sw"; - reg = <7>; - phy-mode = "rgmii"; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; -}; - -&mdio { - /* lan8 */ - ethernet-phy@0 { - reg = <0>; - }; - - /* lan7 */ - ethernet-phy@1 { - reg = <1>; - }; - - /* lan4 */ - ethernet-phy@2 { - reg = <2>; - }; - - /* lan3 */ - ethernet-phy@3 { - reg = <3>; - }; -}; - -&nandcs { - nand-ecc-strength = <4>; - nand-ecc-step-size = <512>; - nand-on-flash-bbt; - brcm,nand-has-wp; - - #address-cells = <1>; - #size-cells = <0>; - - partitions { - compatible = "brcm,bcm4908-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - compatible = "nvmem-cells"; - label = "cferom"; - reg = <0x0 0x100000>; - - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x0 0x100000>; - - base_mac_addr: mac@106a0 { - reg = <0x106a0 0x6>; - }; - }; - - partition@100000 { - compatible = "brcm,bcm4908-firmware"; - reg = <0x100000 0x5700000>; - }; - - partition@5800000 { - compatible = "brcm,bcm4908-firmware"; - reg = <0x5800000 0x5700000>; - }; - }; -}; diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi deleted file mode 100644 index 984c737fa627..000000000000 --- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi +++ /dev/null @@ -1,337 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/phy/phy.h> -#include <dt-bindings/soc/bcm-pmb.h> - -/dts-v1/; - -/ { - interrupt-parent = <&gic>; - - #address-cells = <2>; - #size-cells = <2>; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "brcm,brahma-b53"; - reg = <0x0>; - next-level-cache = <&l2>; - }; - - cpu1: cpu@1 { - device_type = "cpu"; - compatible = "brcm,brahma-b53"; - reg = <0x1>; - enable-method = "spin-table"; - cpu-release-addr = <0x0 0xfff8>; - next-level-cache = <&l2>; - }; - - cpu2: cpu@2 { - device_type = "cpu"; - compatible = "brcm,brahma-b53"; - reg = <0x2>; - enable-method = "spin-table"; - cpu-release-addr = <0x0 0xfff8>; - next-level-cache = <&l2>; - }; - - cpu3: cpu@3 { - device_type = "cpu"; - compatible = "brcm,brahma-b53"; - reg = <0x3>; - enable-method = "spin-table"; - cpu-release-addr = <0x0 0xfff8>; - next-level-cache = <&l2>; - }; - - l2: l2-cache0 { - compatible = "cache"; - }; - }; - - axi@81000000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x00 0x00 0x81000000 0x4000>; - - gic: interrupt-controller@1000 { - compatible = "arm,gic-400"; - #interrupt-cells = <3>; - #address-cells = <0>; - interrupt-controller; - reg = <0x1000 0x1000>, - <0x2000 0x2000>; - }; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; - }; - - pmu { - compatible = "arm,cortex-a53-pmu"; - interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; - interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; - }; - - clocks { - periph_clk: periph_clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <50000000>; - clock-output-names = "periph"; - }; - }; - - soc { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x00 0x00 0x80000000 0x281000>; - - enet: ethernet@2000 { - compatible = "brcm,bcm4908-enet"; - reg = <0x2000 0x1000>; - - interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "rx", "tx"; - }; - - usb_phy: usb-phy@c200 { - compatible = "brcm,bcm4908-usb-phy"; - reg = <0xc200 0x100>; - reg-names = "ctrl"; - power-domains = <&pmb BCM_PMB_HOST_USB>; - dr_mode = "host"; - brcm,has-xhci; - brcm,has-eohci; - #phy-cells = <1>; - status = "disabled"; - }; - - ehci: usb@c300 { - compatible = "generic-ehci"; - reg = <0xc300 0x100>; - interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; - phys = <&usb_phy PHY_TYPE_USB2>; - status = "disabled"; - }; - - ohci: usb@c400 { - compatible = "generic-ohci"; - reg = <0xc400 0x100>; - interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; - phys = <&usb_phy PHY_TYPE_USB2>; - status = "disabled"; - }; - - xhci: usb@d000 { - compatible = "generic-xhci"; - reg = <0xd000 0x8c8>; - interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; - phys = <&usb_phy PHY_TYPE_USB3>; - status = "disabled"; - }; - - bus@80000 { - compatible = "simple-bus"; - #size-cells = <1>; - #address-cells = <1>; - ranges = <0 0x80000 0x50000>; - - ethernet-switch@0 { - compatible = "brcm,bcm4908-switch"; - reg = <0x0 0x40000>, - <0x40000 0x110>, - <0x40340 0x30>, - <0x40380 0x30>, - <0x40600 0x34>, - <0x40800 0x208>; - reg-names = "core", "reg", "intrl2_0", - "intrl2_1", "fcb", "acb"; - interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; - brcm,num-gphy = <5>; - brcm,num-rgmii-ports = <2>; - - #address-cells = <1>; - #size-cells = <0>; - - ports: ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - phy-mode = "internal"; - phy-handle = <&phy8>; - }; - - port@1 { - reg = <1>; - phy-mode = "internal"; - phy-handle = <&phy9>; - }; - - port@2 { - reg = <2>; - phy-mode = "internal"; - phy-handle = <&phy10>; - }; - - port@3 { - reg = <3>; - phy-mode = "internal"; - phy-handle = <&phy11>; - }; - - port@8 { - reg = <8>; - phy-mode = "internal"; - ethernet = <&enet>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - }; - - mdio: mdio@405c0 { - compatible = "brcm,unimac-mdio"; - reg = <0x405c0 0x8>; - reg-names = "mdio"; - #size-cells = <0>; - #address-cells = <1>; - - phy8: ethernet-phy@8 { - reg = <8>; - }; - - phy9: ethernet-phy@9 { - reg = <9>; - }; - - phy10: ethernet-phy@a { - reg = <10>; - }; - - phy11: ethernet-phy@b { - reg = <11>; - }; - - phy12: ethernet-phy@c { - reg = <12>; - }; - }; - }; - - procmon: syscon@280000 { - compatible = "simple-bus"; - reg = <0x280000 0x1000>; - ranges; - - #address-cells = <1>; - #size-cells = <1>; - - pmb: power-controller@2800c0 { - compatible = "brcm,bcm4908-pmb"; - reg = <0x2800c0 0x40>; - #power-domain-cells = <1>; - }; - }; - }; - - bus@ff800000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x00 0x00 0xff800000 0x3000>; - - timer: timer@400 { - compatible = "brcm,bcm6328-timer", "syscon"; - reg = <0x400 0x3c>; - }; - - gpio0: gpio-controller@500 { - compatible = "brcm,bcm6345-gpio"; - reg-names = "dirout", "dat"; - reg = <0x500 0x28>, <0x528 0x28>; - - #gpio-cells = <2>; - gpio-controller; - }; - - uart0: serial@640 { - compatible = "brcm,bcm6345-uart"; - reg = <0x640 0x18>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&periph_clk>; - clock-names = "refclk"; - status = "okay"; - }; - - nand-controller@1800 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand"; - reg = <0x1800 0x600>, <0x2000 0x10>; - reg-names = "nand", "nand-int-base"; - interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "nand"; - status = "okay"; - - nandcs: nand@0 { - compatible = "brcm,nandcs"; - reg = <0>; - }; - }; - - misc@2600 { - compatible = "brcm,misc", "simple-mfd"; - reg = <0x2600 0xe4>; - - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x00 0x2600 0xe4>; - - reset-controller@2644 { - compatible = "brcm,bcm4908-misc-pcie-reset"; - reg = <0x44 0x04>; - #reset-cells = <1>; - }; - }; - }; - - reboot { - compatible = "syscon-reboot"; - regmap = <&timer>; - offset = <0x34>; - mask = <1>; - }; -}; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile new file mode 100644 index 000000000000..27741b71ba9e --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile @@ -0,0 +1,14 @@ +# SPDX-License-Identifier: GPL-2.0 +dtb-$(CONFIG_ARCH_BCMBCA) += \ + bcm4906-netgear-r8000p.dtb \ + bcm4906-tplink-archer-c2300-v1.dtb \ + bcm4908-asus-gt-ac5300.dtb \ + bcm4908-netgear-raxe500.dtb \ + bcm94908.dtb \ + bcm4912-asus-gt-ax6000.dtb \ + bcm94912.dtb \ + bcm963158.dtb \ + bcm96858.dtb \ + bcm963146.dtb \ + bcm96856.dtb \ + bcm96813.dtb diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts index 2dd028438c22..d8b60575eb4f 100644 --- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts @@ -7,7 +7,7 @@ #include "bcm4906.dtsi" / { - compatible = "netgear,r8000p", "brcm,bcm4906", "brcm,bcm4908"; + compatible = "netgear,r8000p", "brcm,bcm4906", "brcm,bcm4908", "brcm,bcmbca"; model = "Netgear R8000P"; memory@0 { diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts index b63eefab48bd..296393d4aaab 100644 --- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts @@ -7,7 +7,7 @@ #include "bcm4906.dtsi" / { - compatible = "tplink,archer-c2300-v1", "brcm,bcm4906", "brcm,bcm4908"; + compatible = "tplink,archer-c2300-v1", "brcm,bcm4906", "brcm,bcm4908", "brcm,bcmbca"; model = "TP-Link Archer C2300 V1"; memory@0 { @@ -83,25 +83,25 @@ compatible = "gpio-keys-polled"; poll-interval = <100>; - brightness { + key-brightness { label = "LEDs"; linux,code = <KEY_BRIGHTNESS_ZERO>; gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; }; - wps { + key-wps { label = "WPS"; linux,code = <KEY_WPS_BUTTON>; gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; }; - wifi { + key-wifi { label = "WiFi"; linux,code = <KEY_RFKILL>; gpios = <&gpio0 22 GPIO_ACTIVE_LOW>; }; - restart { + key-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&gpio0 23 GPIO_ACTIVE_LOW>; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906.dtsi new file mode 100644 index 000000000000..d084c33d5ca8 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906.dtsi @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "bcm4908.dtsi" + +/ { + cpus { + /delete-node/ cpu@2; + + /delete-node/ cpu@3; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + }; + + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>; + }; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts new file mode 100644 index 000000000000..839ca33178b0 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts @@ -0,0 +1,207 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +#include "bcm4908.dtsi" + +/ { + compatible = "asus,gt-ac5300", "brcm,bcm4908", "brcm,bcmbca"; + model = "Asus GT-AC5300"; + + memory@0 { + device_type = "memory"; + reg = <0x00 0x00 0x00 0x40000000>; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + key-wifi { + label = "WiFi"; + linux,code = <KEY_RFKILL>; + gpios = <&gpio0 28 GPIO_ACTIVE_LOW>; + }; + + key-wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; + }; + + key-restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&gpio0 30 GPIO_ACTIVE_LOW>; + }; + + key-brightness { + label = "LEDs"; + linux,code = <KEY_BRIGHTNESS_ZERO>; + gpios = <&gpio0 31 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&enet { + nvmem-cells = <&base_mac_addr>; + nvmem-cell-names = "mac-address"; +}; + +&usb_phy { + brcm,ioc = <1>; + status = "okay"; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +&xhci { + status = "okay"; +}; + +&ports { + port@0 { + label = "lan2"; + }; + + port@1 { + label = "lan1"; + }; + + port@2 { + label = "lan6"; + }; + + port@3 { + label = "lan5"; + }; + + /* External BCM53134S switch */ + port@7 { + label = "sw"; + reg = <7>; + phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; +}; + +&mdio { + /* lan8 */ + ethernet-phy@0 { + reg = <0>; + }; + + /* lan7 */ + ethernet-phy@1 { + reg = <1>; + }; + + /* lan4 */ + ethernet-phy@2 { + reg = <2>; + }; + + /* lan3 */ + ethernet-phy@3 { + reg = <3>; + }; +}; + +&leds { + led-power@11 { + reg = <0x11>; + function = LED_FUNCTION_POWER; + color = <LED_COLOR_ID_WHITE>; + default-state = "on"; + active-low; + pinctrl-names = "default"; + pinctrl-0 = <&pins_led_17_a>; + }; + + led-wan-red@12 { + reg = <0x12>; + function = LED_FUNCTION_WAN; + color = <LED_COLOR_ID_RED>; + active-low; + pinctrl-names = "default"; + pinctrl-0 = <&pins_led_18_a>; + }; + + led-wps@14 { + reg = <0x14>; + function = LED_FUNCTION_WPS; + color = <LED_COLOR_ID_WHITE>; + active-low; + pinctrl-names = "default"; + pinctrl-0 = <&pins_led_20_a>; + }; + + led-wan-white@15 { + reg = <0x15>; + function = LED_FUNCTION_WAN; + color = <LED_COLOR_ID_WHITE>; + active-low; + pinctrl-names = "default"; + pinctrl-0 = <&pins_led_21_a>; + }; + + led-lan@19 { + reg = <0x19>; + function = LED_FUNCTION_LAN; + color = <LED_COLOR_ID_WHITE>; + pinctrl-names = "default"; + pinctrl-0 = <&pins_led_25_a>; + }; +}; + +&nandcs { + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-on-flash-bbt; + brcm,nand-has-wp; + + #address-cells = <1>; + #size-cells = <0>; + + partitions { + compatible = "brcm,bcm4908-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + compatible = "nvmem-cells"; + label = "cferom"; + reg = <0x0 0x100000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x100000>; + + base_mac_addr: mac@106a0 { + reg = <0x106a0 0x6>; + }; + }; + + partition@100000 { + compatible = "brcm,bcm4908-firmware"; + reg = <0x100000 0x5700000>; + }; + + partition@5800000 { + compatible = "brcm,bcm4908-firmware"; + reg = <0x5800000 0x5700000>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-netgear-raxe500.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-netgear-raxe500.dts new file mode 100644 index 000000000000..23b96c663239 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-netgear-raxe500.dts @@ -0,0 +1,50 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "bcm4908.dtsi" + +/ { + compatible = "netgear,raxe500", "brcm,bcm4908", "brcm,bcmbca"; + model = "Netgear RAXE500"; + + memory@0 { + device_type = "memory"; + reg = <0x00 0x00 0x00 0x40000000>; + }; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +&xhci { + status = "okay"; +}; + +&ports { + port@0 { + label = "lan4"; + }; + + port@1 { + label = "lan3"; + }; + + port@2 { + label = "lan2"; + }; + + port@3 { + label = "lan1"; + }; + + port@7 { + reg = <7>; + phy-mode = "internal"; + phy-handle = <&phy12>; + label = "wan"; + }; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi new file mode 100644 index 000000000000..dac9d3b4e91d --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi @@ -0,0 +1,575 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/phy/phy.h> +#include <dt-bindings/soc/bcm-pmb.h> + +/dts-v1/; + +/ { + interrupt-parent = <&gic>; + + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "brcm,brahma-b53"; + reg = <0x0>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0xfff8>; + next-level-cache = <&l2>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "brcm,brahma-b53"; + reg = <0x1>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0xfff8>; + next-level-cache = <&l2>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "brcm,brahma-b53"; + reg = <0x2>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0xfff8>; + next-level-cache = <&l2>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "brcm,brahma-b53"; + reg = <0x3>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0xfff8>; + next-level-cache = <&l2>; + }; + + l2: l2-cache0 { + compatible = "cache"; + }; + }; + + axi@81000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00 0x00 0x81000000 0x4000>; + + gic: interrupt-controller@1000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x1000 0x1000>, + <0x2000 0x2000>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + + clocks { + periph_clk: periph_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + clock-output-names = "periph"; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00 0x00 0x80000000 0x281000>; + + enet: ethernet@2000 { + compatible = "brcm,bcm4908-enet"; + reg = <0x2000 0x1000>; + + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "rx", "tx"; + }; + + usb_phy: usb-phy@c200 { + compatible = "brcm,bcm4908-usb-phy"; + reg = <0xc200 0x100>; + reg-names = "ctrl"; + power-domains = <&pmb BCM_PMB_HOST_USB>; + dr_mode = "host"; + brcm,has-xhci; + brcm,has-eohci; + #phy-cells = <1>; + status = "disabled"; + }; + + ehci: usb@c300 { + compatible = "generic-ehci"; + reg = <0xc300 0x100>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb_phy PHY_TYPE_USB2>; + status = "disabled"; + }; + + ohci: usb@c400 { + compatible = "generic-ohci"; + reg = <0xc400 0x100>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb_phy PHY_TYPE_USB2>; + status = "disabled"; + }; + + xhci: usb@d000 { + compatible = "generic-xhci"; + reg = <0xd000 0x8c8>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb_phy PHY_TYPE_USB3>; + status = "disabled"; + }; + + bus@80000 { + compatible = "simple-bus"; + #size-cells = <1>; + #address-cells = <1>; + ranges = <0 0x80000 0x50000>; + + ethernet-switch@0 { + compatible = "brcm,bcm4908-switch"; + reg = <0x0 0x40000>, + <0x40000 0x110>, + <0x40340 0x30>, + <0x40380 0x30>, + <0x40600 0x34>, + <0x40800 0x208>; + reg-names = "core", "reg", "intrl2_0", + "intrl2_1", "fcb", "acb"; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + brcm,num-gphy = <5>; + brcm,num-rgmii-ports = <2>; + + #address-cells = <1>; + #size-cells = <0>; + + ports: ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + phy-mode = "internal"; + phy-handle = <&phy8>; + }; + + port@1 { + reg = <1>; + phy-mode = "internal"; + phy-handle = <&phy9>; + }; + + port@2 { + reg = <2>; + phy-mode = "internal"; + phy-handle = <&phy10>; + }; + + port@3 { + reg = <3>; + phy-mode = "internal"; + phy-handle = <&phy11>; + }; + + port@8 { + reg = <8>; + phy-mode = "internal"; + ethernet = <&enet>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + + mdio: mdio@405c0 { + compatible = "brcm,unimac-mdio"; + reg = <0x405c0 0x8>; + reg-names = "mdio"; + #size-cells = <0>; + #address-cells = <1>; + + phy8: ethernet-phy@8 { + reg = <8>; + }; + + phy9: ethernet-phy@9 { + reg = <9>; + }; + + phy10: ethernet-phy@a { + reg = <10>; + }; + + phy11: ethernet-phy@b { + reg = <11>; + }; + + phy12: ethernet-phy@c { + reg = <12>; + }; + }; + }; + + procmon: syscon@280000 { + compatible = "simple-bus"; + reg = <0x280000 0x1000>; + ranges; + + #address-cells = <1>; + #size-cells = <1>; + + pmb: power-controller@2800c0 { + compatible = "brcm,bcm4908-pmb"; + reg = <0x2800c0 0x40>; + #power-domain-cells = <1>; + }; + }; + }; + + bus@ff800000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00 0x00 0xff800000 0x3000>; + + twd: timer-mfd@400 { + compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon"; + reg = <0x400 0x4c>; + ranges = <0x0 0x400 0x4c>; + + #address-cells = <1>; + #size-cells = <1>; + + watchdog@28 { + compatible = "brcm,bcm6345-wdt"; + reg = <0x28 0x8>; + }; + }; + + gpio0: gpio-controller@500 { + compatible = "brcm,bcm6345-gpio"; + reg-names = "dirout", "dat"; + reg = <0x500 0x28>, <0x528 0x28>; + + #gpio-cells = <2>; + gpio-controller; + }; + + pinctrl@560 { + compatible = "brcm,bcm4908-pinctrl"; + reg = <0x560 0x10>; + + pins_led_0_a: led_0-a-pins { + function = "led_0"; + groups = "led_0_grp_a"; + }; + + pins_led_1_a: led_1-a-pins { + function = "led_1"; + groups = "led_1_grp_a"; + }; + + pins_led_2_a: led_2-a-pins { + function = "led_2"; + groups = "led_2_grp_a"; + }; + + pins_led_3_a: led_3-a-pins { + function = "led_3"; + groups = "led_3_grp_a"; + }; + + pins_led_4_a: led_4-a-pins { + function = "led_4"; + groups = "led_4_grp_a"; + }; + + pins_led_5_a: led_5-a-pins { + function = "led_5"; + groups = "led_5_grp_a"; + }; + + pins_led_6_a: led_6-a-pins { + function = "led_6"; + groups = "led_6_grp_a"; + }; + + pins_led_7_a: led_7-a-pins { + function = "led_7"; + groups = "led_7_grp_a"; + }; + + pins_led_8_a: led_8-a-pins { + function = "led_8"; + groups = "led_8_grp_a"; + }; + + pins_led_9_a: led_9-a-pins { + function = "led_9"; + groups = "led_9_grp_a"; + }; + + pins_led_10_a: led_10-a-pins { + function = "led_10"; + groups = "led_10_grp_a"; + }; + + pins_led_11_a: led_11-a-pins { + function = "led_11"; + groups = "led_11_grp_a"; + }; + + pins_led_12_a: led_12-a-pins { + function = "led_12"; + groups = "led_12_grp_a"; + }; + + pins_led_13_a: led_13-a-pins { + function = "led_13"; + groups = "led_13_grp_a"; + }; + + pins_led_14_a: led_14-a-pins { + function = "led_14"; + groups = "led_14_grp_a"; + }; + + pins_led_15_a: led_15-a-pins { + function = "led_15"; + groups = "led_15_grp_a"; + }; + + pins_led_16_a: led_16-a-pins { + function = "led_16"; + groups = "led_16_grp_a"; + }; + + pins_led_17_a: led_17-a-pins { + function = "led_17"; + groups = "led_17_grp_a"; + }; + + pins_led_18_a: led_18-a-pins { + function = "led_18"; + groups = "led_18_grp_a"; + }; + + pins_led_19_a: led_19-a-pins { + function = "led_19"; + groups = "led_19_grp_a"; + }; + + pins_led_20_a: led_20-a-pins { + function = "led_20"; + groups = "led_20_grp_a"; + }; + + pins_led_21_a: led_21-a-pins { + function = "led_21"; + groups = "led_21_grp_a"; + }; + + pins_led_22_a: led_22-a-pins { + function = "led_22"; + groups = "led_22_grp_a"; + }; + + pins_led_23_a: led_23-a-pins { + function = "led_23"; + groups = "led_23_grp_a"; + }; + + pins_led_24_a: led_24-a-pins { + function = "led_24"; + groups = "led_24_grp_a"; + }; + + pins_led_25_a: led_25-a-pins { + function = "led_25"; + groups = "led_25_grp_a"; + }; + + pins_led_26_a: led_26-a-pins { + function = "led_26"; + groups = "led_26_grp_a"; + }; + + pins_led_27_a: led_27-a-pins { + function = "led_27"; + groups = "led_27_grp_a"; + }; + + pins_led_28_a: led_28-a-pins { + function = "led_28"; + groups = "led_28_grp_a"; + }; + + pins_led_29_a: led_29-a-pins { + function = "led_29"; + groups = "led_29_grp_a"; + }; + + pins_led_30_a: led_30-a-pins { + function = "led_30"; + groups = "led_30_grp_a"; + }; + + pins_led_31_a: led_31-a-pins { + function = "led_31"; + groups = "led_31_grp_a"; + }; + + pins_hs_uart: hs_uart-pins { + function = "hs_uart"; + groups = "hs_uart_grp"; + }; + + pins_i2c_a: i2c-a-pins { + function = "i2c"; + groups = "i2c_grp_a"; + }; + + pins_i2c_b: i2c-b-pins { + function = "i2c"; + groups = "i2c_grp_b"; + }; + + pins_i2s: i2s-pins { + function = "i2s"; + groups = "i2s_grp"; + }; + + pins_nand_ctrl: nand_ctrl-pins { + function = "nand_ctrl"; + groups = "nand_ctrl_grp"; + }; + + pins_nand_data: nand_data-pins { + function = "nand_data"; + groups = "nand_data_grp"; + }; + + pins_emmc_ctrl: emmc_ctrl-pins { + function = "emmc_ctrl"; + groups = "emmc_ctrl_grp"; + }; + + pins_usb0_pwr: usb0_pwr-pins { + function = "usb0_pwr"; + groups = "usb0_pwr_grp"; + }; + + pins_usb1_pwr: usb1_pwr-pins { + function = "usb1_pwr"; + groups = "usb1_pwr_grp"; + }; + }; + + uart0: serial@640 { + compatible = "brcm,bcm6345-uart"; + reg = <0x640 0x18>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&periph_clk>; + clock-names = "refclk"; + status = "okay"; + }; + + leds: leds@800 { + compatible = "brcm,bcm4908-leds", "brcm,bcm63138-leds"; + reg = <0x800 0xdc>; + + #address-cells = <1>; + #size-cells = <0>; + }; + + nand-controller@1800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand"; + reg = <0x1800 0x600>, <0x2000 0x10>; + reg-names = "nand", "nand-int-base"; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "nand"; + status = "okay"; + + nandcs: nand@0 { + compatible = "brcm,nandcs"; + reg = <0>; + }; + }; + + i2c@2100 { + compatible = "brcm,brcmper-i2c"; + reg = <0x2100 0x58>; + clock-frequency = <97500>; + pinctrl-names = "default"; + pinctrl-0 = <&pins_i2c_a>; + status = "disabled"; + }; + + misc@2600 { + compatible = "brcm,misc", "simple-mfd"; + reg = <0x2600 0xe4>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00 0x2600 0xe4>; + + reset-controller@2644 { + compatible = "brcm,bcm4908-misc-pcie-reset"; + reg = <0x44 0x04>; + #reset-cells = <1>; + }; + }; + }; + + reboot { + compatible = "syscon-reboot"; + regmap = <&twd>; + offset = <0x34>; + mask = <1>; + }; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912-asus-gt-ax6000.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912-asus-gt-ax6000.dts new file mode 100644 index 000000000000..ed554666e95e --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912-asus-gt-ax6000.dts @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +/dts-v1/; + +#include "bcm4912.dtsi" + +/ { + compatible = "asus,gt-ax6000", "brcm,bcm4912", "brcm,bcmbca"; + model = "Asus GT-AX6000"; + + memory@0 { + device_type = "memory"; + reg = <0x00 0x00 0x00 0x40000000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi new file mode 100644 index 000000000000..3d016c2ce675 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi @@ -0,0 +1,128 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "brcm,bcm4912", "brcm,bcmbca"; + #address-cells = <2>; + #size-cells = <2>; + + interrupt-parent = <&gic>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + B53_0: cpu@0 { + compatible = "brcm,brahma-b53"; + device_type = "cpu"; + reg = <0x0 0x0>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + B53_1: cpu@1 { + compatible = "brcm,brahma-b53"; + device_type = "cpu"; + reg = <0x0 0x1>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + B53_2: cpu@2 { + compatible = "brcm,brahma-b53"; + device_type = "cpu"; + reg = <0x0 0x2>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + B53_3: cpu@3 { + compatible = "brcm,brahma-b53"; + device_type = "cpu"; + reg = <0x0 0x3>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + L2_0: l2-cache0 { + compatible = "cache"; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + pmu: pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&B53_0>, <&B53_1>, + <&B53_2>, <&B53_3>; + }; + + clocks: clocks { + periph_clk: periph-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + uart_clk: uart-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&periph_clk>; + clock-div = <4>; + clock-mult = <1>; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + axi@81000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x81000000 0x8000>; + + gic: interrupt-controller@1000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + reg = <0x1000 0x1000>, + <0x2000 0x2000>, + <0x4000 0x2000>, + <0x6000 0x2000>; + }; + }; + + bus@ff800000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0xff800000 0x800000>; + + uart0: serial@12000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x12000 0x1000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart_clk>, <&uart_clk>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi new file mode 100644 index 000000000000..04de96bd0a03 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi @@ -0,0 +1,110 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "brcm,bcm63146", "brcm,bcmbca"; + #address-cells = <2>; + #size-cells = <2>; + + interrupt-parent = <&gic>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + B53_0: cpu@0 { + compatible = "brcm,brahma-b53"; + device_type = "cpu"; + reg = <0x0 0x0>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + B53_1: cpu@1 { + compatible = "brcm,brahma-b53"; + device_type = "cpu"; + reg = <0x0 0x1>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + L2_0: l2-cache0 { + compatible = "cache"; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + }; + + pmu: pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&B53_0>, <&B53_1>; + }; + + clocks: clocks { + periph_clk: periph-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + uart_clk: uart-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&periph_clk>; + clock-div = <4>; + clock-mult = <1>; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + axi@81000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x81000000 0x8000>; + + gic: interrupt-controller@1000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x1000 0x1000>, + <0x2000 0x2000>, + <0x4000 0x2000>, + <0x6000 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_HIGH)>; + }; + }; + + bus@ff800000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0xff800000 0x800000>; + + uart0: serial@12000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x12000 0x1000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart_clk>, <&uart_clk>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi new file mode 100644 index 000000000000..13629702f70b --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi @@ -0,0 +1,128 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "brcm,bcm63158", "brcm,bcmbca"; + #address-cells = <2>; + #size-cells = <2>; + + interrupt-parent = <&gic>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + B53_0: cpu@0 { + compatible = "brcm,brahma-b53"; + device_type = "cpu"; + reg = <0x0 0x0>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + B53_1: cpu@1 { + compatible = "brcm,brahma-b53"; + device_type = "cpu"; + reg = <0x0 0x1>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + B53_2: cpu@2 { + compatible = "brcm,brahma-b53"; + device_type = "cpu"; + reg = <0x0 0x2>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + B53_3: cpu@3 { + compatible = "brcm,brahma-b53"; + device_type = "cpu"; + reg = <0x0 0x3>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + L2_0: l2-cache0 { + compatible = "cache"; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + pmu: pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&B53_0>, <&B53_1>, + <&B53_2>, <&B53_3>; + }; + + clocks: clocks { + periph_clk: periph-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + uart_clk: uart-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&periph_clk>; + clock-div = <4>; + clock-mult = <1>; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + axi@81000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x81000000 0x8000>; + + gic: interrupt-controller@1000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + reg = <0x1000 0x1000>, + <0x2000 0x2000>, + <0x4000 0x2000>, + <0x6000 0x2000>; + }; + }; + + bus@ff800000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0xff800000 0x800000>; + + uart0: serial@12000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x12000 0x1000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart_clk>, <&uart_clk>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi new file mode 100644 index 000000000000..c3e6197be808 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi @@ -0,0 +1,128 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "brcm,bcm6813", "brcm,bcmbca"; + #address-cells = <2>; + #size-cells = <2>; + + interrupt-parent = <&gic>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + B53_0: cpu@0 { + compatible = "brcm,brahma-b53"; + device_type = "cpu"; + reg = <0x0 0x0>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + B53_1: cpu@1 { + compatible = "brcm,brahma-b53"; + device_type = "cpu"; + reg = <0x0 0x1>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + B53_2: cpu@2 { + compatible = "brcm,brahma-b53"; + device_type = "cpu"; + reg = <0x0 0x2>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + B53_3: cpu@3 { + compatible = "brcm,brahma-b53"; + device_type = "cpu"; + reg = <0x0 0x3>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + L2_0: l2-cache0 { + compatible = "cache"; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + pmu: pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&B53_0>, <&B53_1>, + <&B53_2>, <&B53_3>; + }; + + clocks: clocks { + periph_clk: periph-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + uart_clk: uart-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&periph_clk>; + clock-div = <4>; + clock-mult = <1>; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + axi@81000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x81000000 0x8000>; + + gic: interrupt-controller@1000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + reg = <0x1000 0x1000>, + <0x2000 0x2000>, + <0x4000 0x2000>, + <0x6000 0x2000>; + }; + }; + + bus@ff800000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0xff800000 0x800000>; + + uart0: serial@12000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x12000 0x1000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart_clk>, <&uart_clk>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi new file mode 100644 index 000000000000..0bce6497219f --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi @@ -0,0 +1,103 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "brcm,bcm6856", "brcm,bcmbca"; + #address-cells = <2>; + #size-cells = <2>; + + interrupt-parent = <&gic>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + B53_0: cpu@0 { + compatible = "brcm,brahma-b53"; + device_type = "cpu"; + reg = <0x0 0x0>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + B53_1: cpu@1 { + compatible = "brcm,brahma-b53"; + device_type = "cpu"; + reg = <0x0 0x1>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + L2_0: l2-cache0 { + compatible = "cache"; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + }; + + pmu: pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&B53_0>, <&B53_1>; + }; + + clocks: clocks { + periph_clk:periph-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + axi@81000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x81000000 0x8000>; + + gic: interrupt-controller@1000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x1000 0x1000>, /* GICD */ + <0x2000 0x2000>, /* GICC */ + <0x4000 0x2000>, /* GICH */ + <0x6000 0x2000>; /* GICV */ + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_HIGH)>; + }; + }; + + bus@ff800000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0xff800000 0x800000>; + + uart0: serial@640 { + compatible = "brcm,bcm6345-uart"; + reg = <0x640 0x18>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&periph_clk>; + clock-names = "refclk"; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi new file mode 100644 index 000000000000..29a880c6c858 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi @@ -0,0 +1,121 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "brcm,bcm6858", "brcm,bcmbca"; + #address-cells = <2>; + #size-cells = <2>; + + interrupt-parent = <&gic>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + B53_0: cpu@0 { + compatible = "brcm,brahma-b53"; + device_type = "cpu"; + reg = <0x0 0x0>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + B53_1: cpu@1 { + compatible = "brcm,brahma-b53"; + device_type = "cpu"; + reg = <0x0 0x1>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + B53_2: cpu@2 { + compatible = "brcm,brahma-b53"; + device_type = "cpu"; + reg = <0x0 0x2>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + B53_3: cpu@3 { + compatible = "brcm,brahma-b53"; + device_type = "cpu"; + reg = <0x0 0x3>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + L2_0: l2-cache0 { + compatible = "cache"; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + pmu: pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&B53_0>, <&B53_1>, + <&B53_2>, <&B53_3>; + }; + + clocks: clocks { + periph_clk:periph-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + axi@81000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x81000000 0x8000>; + + gic: interrupt-controller@1000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x1000 0x1000>, /* GICD */ + <0x2000 0x2000>, /* GICC */ + <0x4000 0x2000>, /* GICH */ + <0x6000 0x2000>; /* GICV */ + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_HIGH)>; + }; + }; + + bus@ff800000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0xff800000 0x62000>; + + uart0: serial@640 { + compatible = "brcm,bcm6345-uart"; + reg = <0x640 0x18>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&periph_clk>; + clock-names = "refclk"; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts new file mode 100644 index 000000000000..fcbd3c430ace --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +/dts-v1/; + +#include "bcm4908.dtsi" + +/ { + model = "Broadcom BCM94908 Reference Board"; + compatible = "brcm,bcm94908", "brcm,bcm4908", "brcm,bcmbca"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x08000000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts new file mode 100644 index 000000000000..a3623e6f6919 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +/dts-v1/; + +#include "bcm4912.dtsi" + +/ { + model = "Broadcom BCM94912 Reference Board"; + compatible = "brcm,bcm94912", "brcm,bcm4912", "brcm,bcmbca"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x08000000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm963146.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963146.dts new file mode 100644 index 000000000000..e39f1e6d4774 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963146.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +/dts-v1/; + +#include "bcm63146.dtsi" + +/ { + model = "Broadcom BCM963146 Reference Board"; + compatible = "brcm,bcm963146", "brcm,bcm63146", "brcm,bcmbca"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x08000000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts new file mode 100644 index 000000000000..eba07e0b1ca6 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +/dts-v1/; + +#include "bcm63158.dtsi" + +/ { + model = "Broadcom BCM963158 Reference Board"; + compatible = "brcm,bcm963158", "brcm,bcm63158", "brcm,bcmbca"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x08000000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96813.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96813.dts new file mode 100644 index 000000000000..af17091ae764 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96813.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +/dts-v1/; + +#include "bcm6813.dtsi" + +/ { + model = "Broadcom BCM96813 Reference Board"; + compatible = "brcm,bcm96813", "brcm,bcm6813", "brcm,bcmbca"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x08000000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts new file mode 100644 index 000000000000..032aeb75c983 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +/dts-v1/; + +#include "bcm6856.dtsi" + +/ { + model = "Broadcom BCM96856 Reference Board"; + compatible = "brcm,bcm96856", "brcm,bcm6856", "brcm,bcmbca"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x08000000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts new file mode 100644 index 000000000000..0cbf582f5d54 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +/dts-v1/; + +#include "bcm6858.dtsi" + +/ { + model = "Broadcom BCM96858 Reference Board"; + compatible = "brcm,bcm96858", "brcm,bcm6858", "brcm,bcmbca"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x08000000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts b/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts index ec19fbf928a1..e34172e3117e 100644 --- a/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts +++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts @@ -111,8 +111,8 @@ compatible = "silabs,si3226x"; reg = <0>; spi-max-frequency = <5000000>; - spi-cpha = <1>; - spi-cpol = <1>; + spi-cpha; + spi-cpol; pl022,hierarchy = <0>; pl022,interface = <0>; pl022,slave-tx-disable = <0>; @@ -135,8 +135,8 @@ at25,byte-len = <0x8000>; at25,addr-mode = <2>; at25,page-size = <64>; - spi-cpha = <1>; - spi-cpol = <1>; + spi-cpha; + spi-cpol; pl022,hierarchy = <0>; pl022,interface = <0>; pl022,slave-tx-disable = <0>; @@ -203,7 +203,7 @@ &qspi { bspi-sel = <0>; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "m25p80"; diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts b/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts index f00c21e0767e..7bf26f3e36bf 100644 --- a/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts +++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts @@ -146,7 +146,7 @@ }; &qspi { - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "m25p80"; diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi index 2cfeaf3b0a87..fda97c47f4e9 100644 --- a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi +++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi @@ -276,7 +276,7 @@ mboxes = <&pdc3 0>; }; - dma0: dma@61360000 { + dma0: dma-controller@61360000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x61360000 0x1000>; interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, @@ -289,8 +289,6 @@ <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; clocks = <&iprocslow>; clock-names = "apb_pclk"; }; @@ -644,7 +642,7 @@ reg = <0x66180000 0x1000>; interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>; clocks = <&iprocslow>, <&iprocslow>; - clock-names = "spiclk", "apb_pclk"; + clock-names = "sspclk", "apb_pclk"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -655,7 +653,7 @@ reg = <0x66190000 0x1000>; interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>; clocks = <&iprocslow>, <&iprocslow>; - clock-names = "spiclk", "apb_pclk"; + clock-names = "sspclk", "apb_pclk"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -687,7 +685,7 @@ }; }; - sata: ahci@663f2000 { + sata: sata@663f2000 { compatible = "brcm,iproc-ahci", "generic-ahci"; reg = <0x663f2000 0x1000>; dma-coherent; diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts b/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts index 77efa28c4dd5..dfac910a45d6 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts +++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts @@ -61,7 +61,7 @@ cs-gpios = <&gpio_hsls 34 0>; status = "okay"; - spi-flash@0 { + flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <20000000>; @@ -76,7 +76,7 @@ cs-gpios = <&gpio_hsls 96 0>; status = "okay"; - spi-flash@0 { + flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <20000000>; diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi index 7b04dfe67bef..8f8c25e51194 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi @@ -519,7 +519,7 @@ reg = <0x00180000 0x1000>; interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; clocks = <&hsls_div2_clk>, <&hsls_div2_clk>; - clock-names = "spiclk", "apb_pclk"; + clock-names = "sspclk", "apb_pclk"; num-cs = <1>; #address-cells = <1>; #size-cells = <0>; @@ -531,7 +531,7 @@ reg = <0x00190000 0x1000>; interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; clocks = <&hsls_div2_clk>, <&hsls_div2_clk>; - clock-names = "spiclk", "apb_pclk"; + clock-names = "sspclk", "apb_pclk"; num-cs = <1>; #address-cells = <1>; #size-cells = <0>; @@ -543,7 +543,7 @@ reg = <0x00220000 0x28>; }; - dma0: dma@310000 { + dma0: dma-controller@310000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x00310000 0x1000>; interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>, @@ -556,8 +556,6 @@ <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; clocks = <&hsls_div2_clk>; clock-names = "apb_pclk"; iommus = <&smmu 0x6000 0x0000>; @@ -569,7 +567,7 @@ reg-names = "amac_base"; dma-coherent; interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>; - status= "disabled"; + status = "disabled"; }; nand: nand@360000 { |