diff options
Diffstat (limited to 'arch/arm64/boot/dts/freescale/imx8ulp.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/freescale/imx8ulp.dtsi | 434 |
1 files changed, 434 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi new file mode 100644 index 000000000000..a987ff7156bd --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi @@ -0,0 +1,434 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2021 NXP + */ + +#include <dt-bindings/clock/imx8ulp-clock.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/imx8ulp-power.h> + +#include "imx8ulp-pinfunc.h" + +/ { + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + gpio0 = &gpiod; + gpio1 = &gpioe; + gpio2 = &gpiof; + mmc0 = &usdhc0; + mmc1 = &usdhc1; + mmc2 = &usdhc2; + serial0 = &lpuart4; + serial1 = &lpuart5; + serial2 = &lpuart6; + serial3 = &lpuart7; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + A35_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&A35_L2>; + }; + + A35_1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0x0 0x1>; + enable-method = "psci"; + next-level-cache = <&A35_L2>; + }; + + A35_L2: l2-cache0 { + compatible = "cache"; + }; + }; + + gic: interrupt-controller@2d400000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x2d400000 0 0x10000>, /* GIC Dist */ + <0x0 0x2d440000 0 0xc0000>; /* GICR (RD_base + SGI_base) */ + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure */ + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* Physical Non-Secure */ + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* Virtual */ + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */ + }; + + frosc: clock-frosc { + compatible = "fixed-clock"; + clock-frequency = <192000000>; + clock-output-names = "frosc"; + #clock-cells = <0>; + }; + + lposc: clock-lposc { + compatible = "fixed-clock"; + clock-frequency = <1000000>; + clock-output-names = "lposc"; + #clock-cells = <0>; + }; + + rosc: clock-rosc { + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "rosc"; + #clock-cells = <0>; + }; + + sosc: clock-sosc { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "sosc"; + #clock-cells = <0>; + }; + + sram@2201f000 { + compatible = "mmio-sram"; + reg = <0x0 0x2201f000 0x0 0x1000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x2201f000 0x1000>; + + scmi_buf: scmi-buf@0 { + compatible = "arm,scmi-shmem"; + reg = <0x0 0x400>; + }; + }; + + firmware { + scmi { + compatible = "arm,scmi-smc"; + arm,smc-id = <0xc20000fe>; + #address-cells = <1>; + #size-cells = <0>; + shmem = <&scmi_buf>; + + scmi_devpd: protocol@11 { + reg = <0x11>; + #power-domain-cells = <1>; + }; + + scmi_sensor: protocol@15 { + reg = <0x15>; + #thermal-sensor-cells = <0>; + }; + }; + }; + + soc@0 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x0 0x40000000>; + + per_bridge3: bus@29000000 { + compatible = "simple-bus"; + reg = <0x29000000 0x800000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + wdog3: watchdog@292a0000 { + compatible = "fsl,imx8ulp-wdt", "fsl,imx7ulp-wdt"; + reg = <0x292a0000 0x10000>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pcc3 IMX8ULP_CLK_WDOG3>; + assigned-clocks = <&pcc3 IMX8ULP_CLK_WDOG3>; + assigned-clock-parents = <&cgc1 IMX8ULP_CLK_SOSC_DIV2>; + timeout-sec = <40>; + }; + + cgc1: clock-controller@292c0000 { + compatible = "fsl,imx8ulp-cgc1"; + reg = <0x292c0000 0x10000>; + clocks = <&rosc>, <&sosc>, <&frosc>, <&lposc>; + clock-names = "rosc", "sosc", "frosc", "lposc"; + #clock-cells = <1>; + }; + + pcc3: clock-controller@292d0000 { + compatible = "fsl,imx8ulp-pcc3"; + reg = <0x292d0000 0x10000>; + #clock-cells = <1>; + }; + + tpm5: tpm@29340000 { + compatible = "fsl,imx8ulp-tpm", "fsl,imx7ulp-tpm"; + reg = <0x29340000 0x1000>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pcc3 IMX8ULP_CLK_TPM5>, + <&pcc3 IMX8ULP_CLK_TPM5>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + lpi2c4: i2c@29370000 { + compatible = "fsl,imx8ulp-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x29370000 0x10000>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pcc3 IMX8ULP_CLK_LPI2C4>, + <&pcc3 IMX8ULP_CLK_LPI2C4>; + clock-names = "per", "ipg"; + assigned-clocks = <&pcc3 IMX8ULP_CLK_LPI2C4>; + assigned-clock-parents = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>; + assigned-clock-rates = <48000000>; + status = "disabled"; + }; + + lpi2c5: i2c@29380000 { + compatible = "fsl,imx8ulp-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x29380000 0x10000>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pcc3 IMX8ULP_CLK_LPI2C5>, + <&pcc3 IMX8ULP_CLK_LPI2C5>; + clock-names = "per", "ipg"; + assigned-clocks = <&pcc3 IMX8ULP_CLK_LPI2C5>; + assigned-clock-parents = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>; + assigned-clock-rates = <48000000>; + status = "disabled"; + }; + + lpuart4: serial@29390000 { + compatible = "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart"; + reg = <0x29390000 0x1000>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pcc3 IMX8ULP_CLK_LPUART4>; + clock-names = "ipg"; + status = "disabled"; + }; + + lpuart5: serial@293a0000 { + compatible = "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart"; + reg = <0x293a0000 0x1000>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pcc3 IMX8ULP_CLK_LPUART5>; + clock-names = "ipg"; + status = "disabled"; + }; + + lpspi4: spi@293b0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8ulp-spi", "fsl,imx7ulp-spi"; + reg = <0x293b0000 0x10000>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pcc3 IMX8ULP_CLK_LPSPI4>, + <&pcc3 IMX8ULP_CLK_LPSPI4>; + clock-names = "per", "ipg"; + assigned-clocks = <&pcc3 IMX8ULP_CLK_LPSPI4>; + assigned-clock-parents = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>; + assigned-clock-rates = <16000000>; + status = "disabled"; + }; + + lpspi5: spi@293c0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8ulp-spi", "fsl,imx7ulp-spi"; + reg = <0x293c0000 0x10000>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pcc3 IMX8ULP_CLK_LPSPI5>, + <&pcc3 IMX8ULP_CLK_LPSPI5>; + clock-names = "per", "ipg"; + assigned-clocks = <&pcc3 IMX8ULP_CLK_LPSPI5>; + assigned-clock-parents = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>; + assigned-clock-rates = <16000000>; + status = "disabled"; + }; + }; + + per_bridge4: bus@29800000 { + compatible = "simple-bus"; + reg = <0x29800000 0x800000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pcc4: clock-controller@29800000 { + compatible = "fsl,imx8ulp-pcc4"; + reg = <0x29800000 0x10000>; + #clock-cells = <1>; + }; + + lpi2c6: i2c@29840000 { + compatible = "fsl,imx8ulp-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x29840000 0x10000>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pcc4 IMX8ULP_CLK_LPI2C6>, + <&pcc4 IMX8ULP_CLK_LPI2C6>; + clock-names = "per", "ipg"; + assigned-clocks = <&pcc4 IMX8ULP_CLK_LPI2C6>; + assigned-clock-parents = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>; + assigned-clock-rates = <48000000>; + status = "disabled"; + }; + + lpi2c7: i2c@29850000 { + compatible = "fsl,imx8ulp-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x29850000 0x10000>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pcc4 IMX8ULP_CLK_LPI2C7>, + <&pcc4 IMX8ULP_CLK_LPI2C7>; + clock-names = "per", "ipg"; + assigned-clocks = <&pcc4 IMX8ULP_CLK_LPI2C7>; + assigned-clock-parents = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>; + assigned-clock-rates = <48000000>; + status = "disabled"; + }; + + lpuart6: serial@29860000 { + compatible = "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart"; + reg = <0x29860000 0x1000>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pcc4 IMX8ULP_CLK_LPUART6>; + clock-names = "ipg"; + status = "disabled"; + }; + + lpuart7: serial@29870000 { + compatible = "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart"; + reg = <0x29870000 0x1000>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pcc4 IMX8ULP_CLK_LPUART7>; + clock-names = "ipg"; + status = "disabled"; + }; + + iomuxc1: pinctrl@298c0000 { + compatible = "fsl,imx8ulp-iomuxc1"; + reg = <0x298c0000 0x10000>; + }; + + usdhc0: mmc@298d0000 { + compatible = "fsl,imx8ulp-usdhc", "fsl,imx8mm-usdhc"; + reg = <0x298d0000 0x10000>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>, + <&cgc1 IMX8ULP_CLK_XBAR_AD_DIVPLAT>, + <&pcc4 IMX8ULP_CLK_USDHC0>; + clock-names = "ipg", "ahb", "per"; + power-domains = <&scmi_devpd IMX8ULP_PD_USDHC0>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + bus-width = <4>; + status = "disabled"; + }; + + usdhc1: mmc@298e0000 { + compatible = "fsl,imx8ulp-usdhc", "fsl,imx8mm-usdhc"; + reg = <0x298e0000 0x10000>; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>, + <&cgc1 IMX8ULP_CLK_NIC_PER_DIVPLAT>, + <&pcc4 IMX8ULP_CLK_USDHC1>; + clock-names = "ipg", "ahb", "per"; + power-domains = <&scmi_devpd IMX8ULP_PD_USDHC1>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + bus-width = <4>; + status = "disabled"; + }; + + usdhc2: mmc@298f0000 { + compatible = "fsl,imx8ulp-usdhc", "fsl,imx8mm-usdhc"; + reg = <0x298f0000 0x10000>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>, + <&cgc1 IMX8ULP_CLK_NIC_PER_DIVPLAT>, + <&pcc4 IMX8ULP_CLK_USDHC2>; + clock-names = "ipg", "ahb", "per"; + power-domains = <&scmi_devpd IMX8ULP_PD_USDHC2_USB1>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + bus-width = <4>; + status = "disabled"; + }; + }; + + gpioe: gpio@2d000000 { + compatible = "fsl,imx8ulp-gpio", "fsl,imx7ulp-gpio"; + reg = <0x2d000080 0x1000>, <0x2d000040 0x40>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pcc4 IMX8ULP_CLK_RGPIOE>, + <&pcc4 IMX8ULP_CLK_PCTLE>; + clock-names = "gpio", "port"; + gpio-ranges = <&iomuxc1 0 32 24>; + }; + + gpiof: gpio@2d010000 { + compatible = "fsl,imx8ulp-gpio", "fsl,imx7ulp-gpio"; + reg = <0x2d010080 0x1000>, <0x2d010040 0x40>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pcc4 IMX8ULP_CLK_RGPIOF>, + <&pcc4 IMX8ULP_CLK_PCTLF>; + clock-names = "gpio", "port"; + gpio-ranges = <&iomuxc1 0 64 32>; + }; + + per_bridge5: bus@2d800000 { + compatible = "simple-bus"; + reg = <0x2d800000 0x800000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + cgc2: clock-controller@2da60000 { + compatible = "fsl,imx8ulp-cgc2"; + reg = <0x2da60000 0x10000>; + clocks = <&sosc>, <&frosc>; + clock-names = "sosc", "frosc"; + #clock-cells = <1>; + }; + + pcc5: clock-controller@2da70000 { + compatible = "fsl,imx8ulp-pcc5"; + reg = <0x2da70000 0x10000>; + #clock-cells = <1>; + }; + }; + + gpiod: gpio@2e200000 { + compatible = "fsl,imx8ulp-gpio", "fsl,imx7ulp-gpio"; + reg = <0x2e200080 0x1000>, <0x2e200040 0x40>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pcc5 IMX8ULP_CLK_RGPIOD>, + <&pcc5 IMX8ULP_CLK_RGPIOD>; + clock-names = "gpio", "port"; + gpio-ranges = <&iomuxc1 0 0 24>; + }; + }; +}; |