diff options
Diffstat (limited to 'arch/arm64/boot/dts/marvell/cn9132-db.dts')
| -rw-r--r-- | arch/arm64/boot/dts/marvell/cn9132-db.dts | 221 |
1 files changed, 221 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/marvell/cn9132-db.dts b/arch/arm64/boot/dts/marvell/cn9132-db.dts new file mode 100644 index 000000000000..4ef0df3097ca --- /dev/null +++ b/arch/arm64/boot/dts/marvell/cn9132-db.dts @@ -0,0 +1,221 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Marvell International Ltd. + * + * Device tree for the CN9132-DB board. + */ + +#include "cn9131-db.dts" + +/ { + model = "Marvell Armada CN9132-DB"; + compatible = "marvell,cn9132", "marvell,cn9131", "marvell,cn9130", + "marvell,armada-ap807-quad", "marvell,armada-ap807"; + + aliases { + gpio5 = &cp2_gpio1; + gpio6 = &cp2_gpio2; + ethernet5 = &cp2_eth0; + }; + + cp2_reg_usb3_vbus0: cp2_usb3_vbus@0 { + compatible = "regulator-fixed"; + regulator-name = "cp2-xhci0-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&cp2_gpio1 2 GPIO_ACTIVE_HIGH>; + }; + + cp2_usb3_0_phy0: cp2_usb3_phy0 { + compatible = "usb-nop-xceiv"; + vcc-supply = <&cp2_reg_usb3_vbus0>; + }; + + cp2_reg_usb3_vbus1: cp2_usb3_vbus@1 { + compatible = "regulator-fixed"; + regulator-name = "cp2-xhci1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&cp2_gpio1 3 GPIO_ACTIVE_HIGH>; + }; + + cp2_usb3_0_phy1: cp2_usb3_phy1 { + compatible = "usb-nop-xceiv"; + vcc-supply = <&cp2_reg_usb3_vbus1>; + }; + + cp2_reg_sd_vccq: cp2_sd_vccq@0 { + compatible = "regulator-gpio"; + regulator-name = "cp2_sd_vcc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + gpios = <&cp2_gpio2 17 GPIO_ACTIVE_HIGH>; + states = <1800000 0x1 3300000 0x0>; + }; + + cp2_sfp_eth0: sfp-eth0 { + compatible = "sff,sfp"; + i2c-bus = <&cp2_sfpp0_i2c>; + los-gpio = <&cp2_module_expander1 11 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&cp2_module_expander1 10 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&cp2_module_expander1 9 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&cp2_module_expander1 8 GPIO_ACTIVE_HIGH>; + /* + * SFP cages are unconnected on early PCBs because of an the I2C + * lanes not being connected. Prevent the port for being + * unusable by disabling the SFP node. + */ + status = "disabled"; + }; +}; + +/* + * Instantiate the second slave CP115 + */ + +#define CP11X_NAME cp2 +#define CP11X_BASE f6000000 +#define CP11X_PCIEx_MEM_BASE(iface) (0xe5000000 + (iface * 0x1000000)) +#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000 +#define CP11X_PCIE0_BASE f6600000 +#define CP11X_PCIE1_BASE f6620000 +#define CP11X_PCIE2_BASE f6640000 + +#include "armada-cp115.dtsi" + +#undef CP11X_NAME +#undef CP11X_BASE +#undef CP11X_PCIEx_MEM_BASE +#undef CP11X_PCIEx_MEM_SIZE +#undef CP11X_PCIE0_BASE +#undef CP11X_PCIE1_BASE +#undef CP11X_PCIE2_BASE + +&cp2_crypto { + status = "disabled"; +}; + +&cp2_ethernet { + status = "okay"; +}; + +/* SLM-1521-V2, CON9 */ +&cp2_eth0 { + status = "disabled"; + phy-mode = "10gbase-kr"; + /* Generic PHY, providing serdes lanes */ + phys = <&cp2_comphy4 0>; + managed = "in-band-status"; + sfp = <&cp2_sfp_eth0>; +}; + +&cp2_gpio1 { + status = "okay"; +}; + +&cp2_gpio2 { + status = "okay"; +}; + +&cp2_i2c0 { + clock-frequency = <100000>; + + /* SLM-1521-V2 - U3 */ + i2c-mux@72 { + compatible = "nxp,pca9544"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72>; + cp2_sfpp0_i2c: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + /* U12 */ + cp2_module_expander1: pca9555@21 { + compatible = "nxp,pca9555"; + pinctrl-names = "default"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x21>; + }; + }; + }; +}; + +/* SLM-1521-V2, CON6 */ +&cp2_pcie0 { + status = "okay"; + num-lanes = <2>; + num-viewport = <8>; + /* Generic PHY, providing serdes lanes */ + phys = <&cp2_comphy0 0 + &cp2_comphy1 0>; +}; + +/* SLM-1521-V2, CON8 */ +&cp2_pcie2 { + status = "okay"; + num-lanes = <1>; + num-viewport = <8>; + /* Generic PHY, providing serdes lanes */ + phys = <&cp2_comphy5 2>; +}; + +&cp2_sata0 { + status = "okay"; + + /* SLM-1521-V2, CON4 */ + sata-port@0 { + /* Generic PHY, providing serdes lanes */ + phys = <&cp2_comphy2 0>; + }; +}; + +/* CON 2 on SLM-1683 - microSD */ +&cp2_sdhci0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&cp2_sdhci_pins>; + bus-width = <4>; + cd-gpios = <&cp2_gpio2 23 GPIO_ACTIVE_LOW>; + vqmmc-supply = <&cp2_reg_sd_vccq>; +}; + +&cp2_syscon0 { + cp2_pinctrl: pinctrl { + compatible = "marvell,cp115-standalone-pinctrl"; + + cp2_i2c0_pins: cp2-i2c-pins-0 { + marvell,pins = "mpp37", "mpp38"; + marvell,function = "i2c0"; + }; + cp2_sdhci_pins: cp2-sdhi-pins-0 { + marvell,pins = "mpp56", "mpp57", "mpp58", + "mpp59", "mpp60", "mpp61"; + marvell,function = "sdio"; + }; + }; +}; + +&cp2_usb3_0 { + status = "okay"; + usb-phy = <&cp2_usb3_0_phy0>; + phy-names = "usb"; +}; + +/* SLM-1521-V2, CON11 */ +&cp2_usb3_1 { + status = "okay"; + usb-phy = <&cp2_usb3_0_phy1>; + phy-names = "usb"; + /* Generic PHY, providing serdes lanes */ + phys = <&cp2_comphy3 1>; +}; |