diff options
Diffstat (limited to 'arch/arm64/boot/dts/marvell')
-rw-r--r-- | arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 2 | ||||
-rw-r--r-- | arch/arm64/boot/dts/marvell/cn9130-crb.dtsi | 140 | ||||
-rw-r--r-- | arch/arm64/boot/dts/marvell/cn9130.dtsi | 15 |
3 files changed, 157 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index 9acc5d2b5a00..673f4906eef9 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -265,6 +265,8 @@ "lane2_sata_usb3"; #address-cells = <1>; #size-cells = <0>; + clocks = <&xtalclk>; + clock-names = "xtal"; comphy0: phy@0 { reg = <0>; diff --git a/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi b/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi index 505ae69289f6..d9f9f2c19740 100644 --- a/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi +++ b/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi @@ -17,6 +17,8 @@ ethernet0 = &cp0_eth0; ethernet1 = &cp0_eth1; ethernet2 = &cp0_eth2; + gpio1 = &cp0_gpio1; + gpio2 = &cp0_gpio2; }; memory@0 { @@ -71,6 +73,17 @@ enable-active-high; regulator-always-on; }; + + sfp: sfp { + compatible = "sff,sfp"; + i2c-bus = <&cp0_i2c1>; + mod-def0-gpios = <&expander0 3 GPIO_ACTIVE_LOW>; + los-gpio = <&expander0 15 GPIO_ACTIVE_HIGH>; + tx-disable-gpio = <&expander0 2 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&cp0_gpio1 24 GPIO_ACTIVE_HIGH>; + maximum-power-milliwatt = <3000>; + status = "okay"; + }; }; &uart0 { @@ -114,6 +127,14 @@ }; }; +&cp0_gpio1 { + status = "okay"; +}; + +&cp0_gpio2 { + status = "okay"; +}; + &cp0_i2c0 { pinctrl-names = "default"; pinctrl-0 = <&cp0_i2c0_pins>; @@ -185,6 +206,125 @@ phy0: ethernet-phy@0 { reg = <0>; }; + + switch6: switch0@6 { + /* Actual device is MV88E6393X */ + compatible = "marvell,mv88e6190"; + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + interrupt-parent = <&cp0_gpio1>; + interrupts = <28 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + + dsa,member = <0 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + label = "p1"; + phy-handle = <&switch0phy1>; + }; + + port@2 { + reg = <2>; + label = "p2"; + phy-handle = <&switch0phy2>; + }; + + port@3 { + reg = <3>; + label = "p3"; + phy-handle = <&switch0phy3>; + }; + + port@4 { + reg = <4>; + label = "p4"; + phy-handle = <&switch0phy4>; + }; + + port@5 { + reg = <5>; + label = "p5"; + phy-handle = <&switch0phy5>; + }; + + port@6 { + reg = <6>; + label = "p6"; + phy-handle = <&switch0phy6>; + }; + + port@7 { + reg = <7>; + label = "p7"; + phy-handle = <&switch0phy7>; + }; + + port@8 { + reg = <8>; + label = "p8"; + phy-handle = <&switch0phy8>; + }; + + port@9 { + reg = <9>; + label = "p9"; + phy-mode = "10gbase-r"; + sfp = <&sfp>; + managed = "in-band-status"; + }; + + port@a { + reg = <10>; + label = "cpu"; + ethernet = <&cp0_eth0>; + }; + + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch0phy1: switch0phy1@1 { + reg = <0x1>; + }; + + switch0phy2: switch0phy2@2 { + reg = <0x2>; + }; + + switch0phy3: switch0phy3@3 { + reg = <0x3>; + }; + + switch0phy4: switch0phy4@4 { + reg = <0x4>; + }; + + switch0phy5: switch0phy5@5 { + reg = <0x5>; + }; + + switch0phy6: switch0phy6@6 { + reg = <0x6>; + }; + + switch0phy7: switch0phy7@7 { + reg = <0x7>; + }; + + switch0phy8: switch0phy8@8 { + reg = <0x8>; + }; + }; + }; }; &cp0_xmdio { diff --git a/arch/arm64/boot/dts/marvell/cn9130.dtsi b/arch/arm64/boot/dts/marvell/cn9130.dtsi index a2b7e5ec979d..327b04134134 100644 --- a/arch/arm64/boot/dts/marvell/cn9130.dtsi +++ b/arch/arm64/boot/dts/marvell/cn9130.dtsi @@ -11,6 +11,13 @@ model = "Marvell Armada CN9130 SoC"; compatible = "marvell,cn9130", "marvell,armada-ap807-quad", "marvell,armada-ap807"; + + aliases { + gpio1 = &cp0_gpio1; + gpio2 = &cp0_gpio2; + spi1 = &cp0_spi0; + spi2 = &cp0_spi1; + }; }; /* @@ -35,3 +42,11 @@ #undef CP11X_PCIE0_BASE #undef CP11X_PCIE1_BASE #undef CP11X_PCIE2_BASE + +&cp0_gpio1 { + status = "okay"; +}; + +&cp0_gpio2 { + status = "okay"; +}; |