diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts | 61 |
1 files changed, 51 insertions, 10 deletions
diff --git a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts index 42d93d3fba36..9e470c67274e 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts @@ -8,18 +8,14 @@ #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/leds/common.h> +#include <dt-bindings/sound/apq8016-lpass.h> /* * Note: The original firmware from Huawei can only boot 32-bit kernels. - * To boot arm64 kernels it is necessary to flash 64-bit TZ/HYP firmware - * with EDL, e.g. taken from the DragonBoard 410c. This works because Huawei - * forgot to set up (firmware) secure boot for some reason. - * - * Also note that Huawei no longer provides bootloader unlock codes. - * This can be bypassed by patching the bootloader from a custom HYP firmware, - * making it think the bootloader is unlocked. - * - * See: https://wiki.postmarketos.org/wiki/Huawei_Ascend_G7_(huawei-g7) + * To boot this device tree using arm64 it is necessary to flash 64-bit TZ/HYP + * firmware (e.g. taken from the DragonBoard 410c). + * See https://wiki.postmarketos.org/wiki/Huawei_Ascend_G7_(huawei-g7) + * for suggested installation instructions. */ / { @@ -43,7 +39,7 @@ label = "GPIO Buttons"; - volume-up { + button-volume-up { label = "Volume Up"; gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; @@ -216,6 +212,10 @@ status = "okay"; }; +&lpass { + status = "okay"; +}; + &pm8916_resin { status = "okay"; linux,code = <KEY_VOLUMEDOWN>; @@ -260,6 +260,40 @@ cd-gpios = <&msmgpio 56 GPIO_ACTIVE_LOW>; }; +&sound { + status = "okay"; + + model = "msm8916"; + audio-routing = + "AMIC1", "MIC BIAS External1", + "AMIC2", "MIC BIAS External2", + "AMIC3", "MIC BIAS External1"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cdc_pdm_lines_act>; + pinctrl-1 = <&cdc_pdm_lines_sus>; + + primary-dai-link { + link-name = "WCD"; + cpu { + sound-dai = <&lpass MI2S_PRIMARY>; + }; + codec { + sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; + }; + }; + + tertiary-dai-link { + link-name = "WCD-Capture"; + cpu { + sound-dai = <&lpass MI2S_TERTIARY>; + }; + codec { + sound-dai = <&lpass_codec 1>, <&wcd_codec 1>; + }; + }; +}; + &usb { status = "okay"; extcon = <&usb_id>, <&usb_id>; @@ -269,6 +303,13 @@ extcon = <&usb_id>; }; +&wcd_codec { + qcom,micbias-lvl = <2800>; + qcom,mbhc-vthreshold-low = <75 150 237 450 500>; + qcom,mbhc-vthreshold-high = <75 150 237 450 500>; + qcom,hphl-jack-type-normally-open; +}; + &smd_rpm_regulators { vdd_l1_l2_l3-supply = <&pm8916_s3>; vdd_l4_l5_l6-supply = <&pm8916_s4>; |