diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi | 80 |
1 files changed, 80 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi index e675ff48fdd2..bd1eb3eeca53 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi @@ -3,6 +3,7 @@ #include "msm8916.dtsi" #include "pm8916.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> / { @@ -63,6 +64,10 @@ }; }; + wcnss@a21b000 { + status = "okay"; + }; + /* * Attempting to enable these devices causes a "synchronous * external abort". Suspected cause is that the debug power @@ -87,6 +92,44 @@ etm@85f000 { status = "disabled"; }; }; + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default>; + + label = "GPIO Buttons"; + + volume-up { + label = "Volume Up"; + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + + home { + label = "Home"; + gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOMEPAGE>; + }; + }; + + gpio-hall-sensor { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_hall_sensor_default>; + + label = "GPIO Hall Effect Sensor"; + + hall-sensor { + label = "Hall Effect Sensor"; + gpios = <&msmgpio 52 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + linux,can-disable; + }; + }; + i2c-muic { compatible = "i2c-gpio"; sda-gpios = <&msmgpio 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; @@ -109,6 +152,30 @@ }; &msmgpio { + gpio_keys_default: gpio_keys_default { + pinmux { + function = "gpio"; + pins = "gpio107", "gpio109"; + }; + pinconf { + pins = "gpio107", "gpio109"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + gpio_hall_sensor_default: gpio_hall_sensor_default { + pinmux { + function = "gpio"; + pins = "gpio52"; + }; + pinconf { + pins = "gpio52"; + drive-strength = <2>; + bias-disable; + }; + }; + muic_int_default: muic_int_default { pinmux { function = "gpio"; @@ -234,3 +301,16 @@ regulator-max-microvolt = <2700000>; }; }; + +&spmi_bus { + pm8916@0 { + pon@800 { + volume-down { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + bias-pull-up; + linux,code = <KEY_VOLUMEDOWN>; + }; + }; + }; +}; |