diff options
Diffstat (limited to 'arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi | 17 |
1 files changed, 12 insertions, 5 deletions
diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi index 9112e79079a1..c4faff092380 100644 --- a/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi @@ -1,11 +1,12 @@ // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) /* - * Device Tree Source for the RZ/G2L SMARC SOM common parts + * Device Tree Source for the RZ/{G2L,V2L} SMARC SOM common parts * * Copyright (C) 2021 Renesas Electronics Corp. */ #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irqc-rzg2l.h> #include <dt-bindings/pinctrl/rzg2l-pinctrl.h> /* SW1[2] should be at position 2/OFF to enable 64 GB eMMC */ @@ -34,7 +35,7 @@ reg = <0x0 0x48000000 0x0 0x78000000>; }; - reg_1p8v: regulator0 { + reg_1p8v: regulator-1p8v { compatible = "regulator-fixed"; regulator-name = "fixed-1.8V"; regulator-min-microvolt = <1800000>; @@ -43,7 +44,7 @@ regulator-always-on; }; - reg_3p3v: regulator1 { + reg_3p3v: regulator-3p3v { compatible = "regulator-fixed"; regulator-name = "fixed-3.3V"; regulator-min-microvolt = <3300000>; @@ -94,6 +95,8 @@ compatible = "ethernet-phy-id0022.1640", "ethernet-phy-ieee802.3-c22"; reg = <7>; + interrupt-parent = <&irqc>; + interrupts = <RZG2L_IRQ2 IRQ_TYPE_LEVEL_LOW>; rxc-skew-psec = <2400>; txc-skew-psec = <2400>; rxdv-skew-psec = <0>; @@ -120,6 +123,8 @@ compatible = "ethernet-phy-id0022.1640", "ethernet-phy-ieee802.3-c22"; reg = <7>; + interrupt-parent = <&irqc>; + interrupts = <RZG2L_IRQ3 IRQ_TYPE_LEVEL_LOW>; rxc-skew-psec = <2400>; txc-skew-psec = <2400>; rxdv-skew-psec = <0>; @@ -171,7 +176,8 @@ <RZG2L_PORT_PINMUX(25, 0, 1)>, /* ET0_RXD0 */ <RZG2L_PORT_PINMUX(25, 1, 1)>, /* ET0_RXD1 */ <RZG2L_PORT_PINMUX(26, 0, 1)>, /* ET0_RXD2 */ - <RZG2L_PORT_PINMUX(26, 1, 1)>; /* ET0_RXD3 */ + <RZG2L_PORT_PINMUX(26, 1, 1)>, /* ET0_RXD3 */ + <RZG2L_PORT_PINMUX(1, 0, 1)>; /* IRQ2 */ }; eth1_pins: eth1 { @@ -189,7 +195,8 @@ <RZG2L_PORT_PINMUX(34, 1, 1)>, /* ET1_RXD0 */ <RZG2L_PORT_PINMUX(35, 0, 1)>, /* ET1_RXD1 */ <RZG2L_PORT_PINMUX(35, 1, 1)>, /* ET1_RXD2 */ - <RZG2L_PORT_PINMUX(36, 0, 1)>; /* ET1_RXD3 */ + <RZG2L_PORT_PINMUX(36, 0, 1)>, /* ET1_RXD3 */ + <RZG2L_PORT_PINMUX(1, 1, 1)>; /* IRQ3 */ }; gpio-sd0-pwr-en-hog { |