diff options
Diffstat (limited to '')
| -rw-r--r-- | arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi | 42 |
1 files changed, 42 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi index 2863e487a640..6f2a8bdfa225 100644 --- a/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi @@ -21,9 +21,13 @@ * */ +/* comment the #define statement to disable SCIF2 (SER0) on PMOD1 (CN7) */ +#define PMOD1_SER0 1 + / { aliases { serial0 = &scif0; + serial1 = &scif2; i2c0 = &i2c0; i2c1 = &i2c1; i2c3 = &i2c3; @@ -208,6 +212,13 @@ <RZG2L_PORT_PINMUX(38, 1, 1)>; /* RxD */ }; + scif2_pins: scif2 { + pinmux = <RZG2L_PORT_PINMUX(48, 0, 1)>, /* TxD */ + <RZG2L_PORT_PINMUX(48, 1, 1)>, /* RxD */ + <RZG2L_PORT_PINMUX(48, 3, 1)>, /* CTS# */ + <RZG2L_PORT_PINMUX(48, 4, 1)>; /* RTS# */ + }; + sd1-pwr-en-hog { gpio-hog; gpios = <RZG2L_GPIO(39, 2) GPIO_ACTIVE_HIGH>; @@ -252,6 +263,13 @@ input-enable; }; + spi1_pins: spi1 { + pinmux = <RZG2L_PORT_PINMUX(44, 0, 1)>, /* CK */ + <RZG2L_PORT_PINMUX(44, 1, 1)>, /* MOSI */ + <RZG2L_PORT_PINMUX(44, 2, 1)>, /* MISO */ + <RZG2L_PORT_PINMUX(44, 3, 1)>; /* SSL */ + }; + ssi0_pins: ssi0 { pinmux = <RZG2L_PORT_PINMUX(45, 0, 1)>, /* BCK */ <RZG2L_PORT_PINMUX(45, 1, 1)>, /* RCK */ @@ -277,6 +295,23 @@ status = "okay"; }; +/* + * To enable SCIF2 (SER0) on PMOD1 (CN7) + * SW1 should be at position 2->3 so that SER0_CTS# line is activated + * SW2 should be at position 2->3 so that SER0_TX line is activated + * SW3 should be at position 2->3 so that SER0_RX line is activated + * SW4 should be at position 2->3 so that SER0_RTS# line is activated + */ +#if PMOD1_SER0 +&scif2 { + pinctrl-0 = <&scif2_pins>; + pinctrl-names = "default"; + + uart-has-rtscts; + status = "okay"; +}; +#endif + &sdhi1 { pinctrl-0 = <&sdhi1_pins>; pinctrl-1 = <&sdhi1_pins_uhs>; @@ -290,6 +325,13 @@ status = "okay"; }; +&spi1 { + pinctrl-0 = <&spi1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + &ssi0 { pinctrl-0 = <&ssi0_pins>; pinctrl-names = "default"; |