diff options
Diffstat (limited to 'arch/arm64')
371 files changed, 17424 insertions, 6426 deletions
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index b1b4476ddb83..0b30e884e088 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -34,32 +34,32 @@ config ARM64 select ARCH_HAS_TEARDOWN_DMA_OPS if IOMMU_SUPPORT select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST select ARCH_HAVE_NMI_SAFE_CMPXCHG - select ARCH_INLINE_READ_LOCK if !PREEMPT - select ARCH_INLINE_READ_LOCK_BH if !PREEMPT - select ARCH_INLINE_READ_LOCK_IRQ if !PREEMPT - select ARCH_INLINE_READ_LOCK_IRQSAVE if !PREEMPT - select ARCH_INLINE_READ_UNLOCK if !PREEMPT - select ARCH_INLINE_READ_UNLOCK_BH if !PREEMPT - select ARCH_INLINE_READ_UNLOCK_IRQ if !PREEMPT - select ARCH_INLINE_READ_UNLOCK_IRQRESTORE if !PREEMPT - select ARCH_INLINE_WRITE_LOCK if !PREEMPT - select ARCH_INLINE_WRITE_LOCK_BH if !PREEMPT - select ARCH_INLINE_WRITE_LOCK_IRQ if !PREEMPT - select ARCH_INLINE_WRITE_LOCK_IRQSAVE if !PREEMPT - select ARCH_INLINE_WRITE_UNLOCK if !PREEMPT - select ARCH_INLINE_WRITE_UNLOCK_BH if !PREEMPT - select ARCH_INLINE_WRITE_UNLOCK_IRQ if !PREEMPT - select ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE if !PREEMPT - select ARCH_INLINE_SPIN_TRYLOCK if !PREEMPT - select ARCH_INLINE_SPIN_TRYLOCK_BH if !PREEMPT - select ARCH_INLINE_SPIN_LOCK if !PREEMPT - select ARCH_INLINE_SPIN_LOCK_BH if !PREEMPT - select ARCH_INLINE_SPIN_LOCK_IRQ if !PREEMPT - select ARCH_INLINE_SPIN_LOCK_IRQSAVE if !PREEMPT - select ARCH_INLINE_SPIN_UNLOCK if !PREEMPT - select ARCH_INLINE_SPIN_UNLOCK_BH if !PREEMPT - select ARCH_INLINE_SPIN_UNLOCK_IRQ if !PREEMPT - select ARCH_INLINE_SPIN_UNLOCK_IRQRESTORE if !PREEMPT + select ARCH_INLINE_READ_LOCK if !PREEMPTION + select ARCH_INLINE_READ_LOCK_BH if !PREEMPTION + select ARCH_INLINE_READ_LOCK_IRQ if !PREEMPTION + select ARCH_INLINE_READ_LOCK_IRQSAVE if !PREEMPTION + select ARCH_INLINE_READ_UNLOCK if !PREEMPTION + select ARCH_INLINE_READ_UNLOCK_BH if !PREEMPTION + select ARCH_INLINE_READ_UNLOCK_IRQ if !PREEMPTION + select ARCH_INLINE_READ_UNLOCK_IRQRESTORE if !PREEMPTION + select ARCH_INLINE_WRITE_LOCK if !PREEMPTION + select ARCH_INLINE_WRITE_LOCK_BH if !PREEMPTION + select ARCH_INLINE_WRITE_LOCK_IRQ if !PREEMPTION + select ARCH_INLINE_WRITE_LOCK_IRQSAVE if !PREEMPTION + select ARCH_INLINE_WRITE_UNLOCK if !PREEMPTION + select ARCH_INLINE_WRITE_UNLOCK_BH if !PREEMPTION + select ARCH_INLINE_WRITE_UNLOCK_IRQ if !PREEMPTION + select ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE if !PREEMPTION + select ARCH_INLINE_SPIN_TRYLOCK if !PREEMPTION + select ARCH_INLINE_SPIN_TRYLOCK_BH if !PREEMPTION + select ARCH_INLINE_SPIN_LOCK if !PREEMPTION + select ARCH_INLINE_SPIN_LOCK_BH if !PREEMPTION + select ARCH_INLINE_SPIN_LOCK_IRQ if !PREEMPTION + select ARCH_INLINE_SPIN_LOCK_IRQSAVE if !PREEMPTION + select ARCH_INLINE_SPIN_UNLOCK if !PREEMPTION + select ARCH_INLINE_SPIN_UNLOCK_BH if !PREEMPTION + select ARCH_INLINE_SPIN_UNLOCK_IRQ if !PREEMPTION + select ARCH_INLINE_SPIN_UNLOCK_IRQRESTORE if !PREEMPTION select ARCH_KEEP_MEMBLOCK select ARCH_USE_CMPXCHG_LOCKREF select ARCH_USE_QUEUED_RWLOCKS @@ -69,6 +69,7 @@ config ARM64 select ARCH_SUPPORTS_INT128 if CC_HAS_INT128 && (GCC_VERSION >= 50000 || CC_IS_CLANG) select ARCH_SUPPORTS_NUMA_BALANCING select ARCH_WANT_COMPAT_IPC_PARSE_VERSION if COMPAT + select ARCH_WANT_DEFAULT_BPF_JIT select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT select ARCH_WANT_FRAME_POINTERS select ARCH_WANT_HUGE_PMD_SHARE if ARM64_4K_PAGES || (ARM64_16K_PAGES && !ARM64_VA_BITS_36) @@ -81,7 +82,7 @@ config ARM64 select ARM_GIC_V3 select ARM_GIC_V3_ITS if PCI select ARM_PSCI_FW - select BUILDTIME_EXTABLE_SORT + select BUILDTIME_TABLE_SORT select CLONE_BACKWARDS select COMMON_CLK select CPU_PM if (SUSPEND || CPU_IDLE) @@ -103,6 +104,7 @@ config ARM64 select GENERIC_IRQ_SHOW select GENERIC_IRQ_SHOW_LEVEL select GENERIC_PCI_IOMAP + select GENERIC_PTDUMP select GENERIC_SCHED_CLOCK select GENERIC_SMP_IDLE_THREAD select GENERIC_STRNCPY_FROM_USER @@ -138,6 +140,7 @@ config ARM64 select HAVE_CMPXCHG_DOUBLE select HAVE_CMPXCHG_LOCAL select HAVE_CONTEXT_TRACKING + select HAVE_COPY_THREAD_TLS select HAVE_DEBUG_BUGVERBOSE select HAVE_DEBUG_KMEMLEAK select HAVE_DMA_CONTIGUOUS @@ -161,7 +164,8 @@ config ARM64 select HAVE_PERF_USER_STACK_DUMP select HAVE_REGS_AND_STACK_ACCESS_API select HAVE_FUNCTION_ARG_ACCESS_API - select HAVE_RCU_TABLE_FREE + select HAVE_FUTEX_CMPXCHG if FUTEX + select MMU_GATHER_RCU_TABLE_FREE select HAVE_RSEQ select HAVE_STACKPROTECTOR select HAVE_SYSCALL_TRACEPOINTS @@ -301,6 +305,9 @@ config ARCH_SUPPORTS_UPROBES config ARCH_PROC_KCORE_TEXT def_bool y +config BROKEN_GAS_INST + def_bool !$(as-instr,1:\n.inst 0\n.rept . - 1b\n\nnop\n.endr\n) + config KASAN_SHADOW_OFFSET hex depends on KASAN @@ -514,9 +521,13 @@ config ARM64_ERRATUM_1418040 If unsure, say Y. +config ARM64_WORKAROUND_SPECULATIVE_AT_VHE + bool + config ARM64_ERRATUM_1165522 bool "Cortex-A76: Speculative AT instruction using out-of-context translation regime could cause subsequent request to generate an incorrect translation" default y + select ARM64_WORKAROUND_SPECULATIVE_AT_VHE help This option adds a workaround for ARM Cortex-A76 erratum 1165522. @@ -526,6 +537,19 @@ config ARM64_ERRATUM_1165522 If unsure, say Y. +config ARM64_ERRATUM_1530923 + bool "Cortex-A55: Speculative AT instruction using out-of-context translation regime could cause subsequent request to generate an incorrect translation" + default y + select ARM64_WORKAROUND_SPECULATIVE_AT_VHE + help + This option adds a workaround for ARM Cortex-A55 erratum 1530923. + + Affected Cortex-A55 cores (r0p0, r0p1, r1p0, r2p0) could end-up with + corrupted TLBs by speculating an AT instruction during a guest + context switch. + + If unsure, say Y. + config ARM64_ERRATUM_1286807 bool "Cortex-A76: Modification of the translation table for a virtual address might lead to read-after-read ordering violation" default y @@ -542,9 +566,13 @@ config ARM64_ERRATUM_1286807 invalidated has been observed by other observers. The workaround repeats the TLBI+DSB operation. +config ARM64_WORKAROUND_SPECULATIVE_AT_NVHE + bool + config ARM64_ERRATUM_1319367 bool "Cortex-A57/A72: Speculative AT instruction using out-of-context translation regime could cause subsequent request to generate an incorrect translation" default y + select ARM64_WORKAROUND_SPECULATIVE_AT_NVHE help This option adds work arounds for ARM Cortex-A57 erratum 1319537 and A72 erratum 1319367 @@ -1363,6 +1391,11 @@ config ARM64_PAN instruction if the cpu does not implement the feature. config ARM64_LSE_ATOMICS + bool + default ARM64_USE_LSE_ATOMICS + depends on $(as-instr,.arch_extension lse) + +config ARM64_USE_LSE_ATOMICS bool "Atomic instructions" depends on JUMP_LABEL default y @@ -1484,6 +1517,30 @@ config ARM64_PTR_AUTH endmenu +menu "ARMv8.5 architectural features" + +config ARM64_E0PD + bool "Enable support for E0PD" + default y + help + E0PD (part of the ARMv8.5 extensions) allows us to ensure + that EL0 accesses made via TTBR1 always fault in constant time, + providing similar benefits to KASLR as those provided by KPTI, but + with lower overhead and without disrupting legitimate access to + kernel memory such as SPE. + + This option enables E0PD for TTBR1 where available. + +config ARCH_RANDOM + bool "Enable support for random number generation" + default y + help + Random number generation (part of the ARMv8.5 Extensions) + provides a high bandwidth, cryptographically secure + hardware random number generator. + +endmenu + config ARM64_SVE bool "ARM Scalable Vector Extension support" default y @@ -1544,7 +1601,7 @@ config ARM64_MODULE_PLTS config ARM64_PSEUDO_NMI bool "Support for NMI-like interrupts" - select CONFIG_ARM_GIC_V3 + select ARM_GIC_V3 help Adds support for mimicking Non-Maskable Interrupts through the use of GIC interrupt priority. This support requires version 3 or later of diff --git a/arch/arm64/Kconfig.debug b/arch/arm64/Kconfig.debug index cf09010d825f..1c906d932d6b 100644 --- a/arch/arm64/Kconfig.debug +++ b/arch/arm64/Kconfig.debug @@ -1,22 +1,5 @@ # SPDX-License-Identifier: GPL-2.0-only -config ARM64_PTDUMP_CORE - def_bool n - -config ARM64_PTDUMP_DEBUGFS - bool "Export kernel pagetable layout to userspace via debugfs" - depends on DEBUG_KERNEL - select ARM64_PTDUMP_CORE - select DEBUG_FS - help - Say Y here if you want to show the kernel pagetable layout in a - debugfs file. This information is only useful for kernel developers - who are working in architecture specific areas of the kernel. - It is probably not a good idea to enable this feature in a production - kernel. - - If in doubt, say N. - config PID_IN_CONTEXTIDR bool "Write the current PID to the CONTEXTIDR register" help @@ -42,7 +25,7 @@ config ARM64_RANDOMIZE_TEXT_OFFSET config DEBUG_WX bool "Warn on W+X mappings at boot" - select ARM64_PTDUMP_CORE + select PTDUMP_CORE ---help--- Generate a warning if any W+X mappings are found at boot. diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile index 1fbe24d4fdb6..dca1a97751ab 100644 --- a/arch/arm64/Makefile +++ b/arch/arm64/Makefile @@ -30,11 +30,8 @@ LDFLAGS_vmlinux += --fix-cortex-a53-843419 endif endif -# Check for binutils support for specific extensions -lseinstr := $(call as-instr,.arch_extension lse,-DCONFIG_AS_LSE=1) - -ifeq ($(CONFIG_ARM64_LSE_ATOMICS), y) - ifeq ($(lseinstr),) +ifeq ($(CONFIG_ARM64_USE_LSE_ATOMICS), y) + ifneq ($(CONFIG_ARM64_LSE_ATOMICS), y) $(warning LSE atomics not supported by binutils) endif endif @@ -45,19 +42,15 @@ cc_has_k_constraint := $(call try-run,echo \ return 0; \ }' | $(CC) -S -x c -o "$$TMP" -,,-DCONFIG_CC_HAS_K_CONSTRAINT=1) -ifeq ($(CONFIG_ARM64), y) -brokengasinst := $(call as-instr,1:\n.inst 0\n.rept . - 1b\n\nnop\n.endr\n,,-DCONFIG_BROKEN_GAS_INST=1) - - ifneq ($(brokengasinst),) +ifeq ($(CONFIG_BROKEN_GAS_INST),y) $(warning Detected assembler with broken .inst; disassembly will be unreliable) - endif endif -KBUILD_CFLAGS += -mgeneral-regs-only $(lseinstr) $(brokengasinst) \ +KBUILD_CFLAGS += -mgeneral-regs-only \ $(compat_vdso) $(cc_has_k_constraint) KBUILD_CFLAGS += -fno-asynchronous-unwind-tables KBUILD_CFLAGS += $(call cc-disable-warning, psabi) -KBUILD_AFLAGS += $(lseinstr) $(brokengasinst) $(compat_vdso) +KBUILD_AFLAGS += $(compat_vdso) KBUILD_CFLAGS += $(call cc-option,-mabi=lp64) KBUILD_AFLAGS += $(call cc-option,-mabi=lp64) diff --git a/arch/arm64/boot/Makefile b/arch/arm64/boot/Makefile index 1f012c506434..cd3414898d10 100644 --- a/arch/arm64/boot/Makefile +++ b/arch/arm64/boot/Makefile @@ -16,7 +16,7 @@ OBJCOPYFLAGS_Image :=-O binary -R .note -R .note.gnu.build-id -R .comment -S -targets := Image Image.gz +targets := Image Image.bz2 Image.gz Image.lz4 Image.lzma Image.lzo $(obj)/Image: vmlinux FORCE $(call if_changed,objcopy) diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile index d2418021768b..cf4f78617c3f 100644 --- a/arch/arm64/boot/dts/allwinner/Makefile +++ b/arch/arm64/boot/dts/allwinner/Makefile @@ -15,6 +15,8 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus-v1.2.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-emlid-neutis-n5-devboard.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-libretech-all-h3-cc.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-libretech-all-h3-it.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-libretech-all-h5-cc.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo2.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo-plus2.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb @@ -26,4 +28,5 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-3.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-lite2.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-one-plus.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64-model-b.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6.dtb diff --git a/arch/arm64/boot/dts/allwinner/axp803.dtsi b/arch/arm64/boot/dts/allwinner/axp803.dtsi index f0349ef4bfdd..10e9186a76bf 100644 --- a/arch/arm64/boot/dts/allwinner/axp803.dtsi +++ b/arch/arm64/boot/dts/allwinner/axp803.dtsi @@ -1,44 +1,5 @@ -/* - * Copyright 2017 Icenowy Zheng <icenowy@aosc.xyz> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright 2017 Icenowy Zheng <icenowy@aosc.xyz> /* * AXP803 Integrated Power Management Chip diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts index 5634245d11db..c7bd73f35ed8 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts @@ -1,12 +1,11 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (C) 2018 Amarula Solutions B.V. - * Author: Jagan Teki <jagan@amarulasolutions.com> - */ +// Copyright (C) 2018 Amarula Solutions B.V. +// Author: Jagan Teki <jagan@amarulasolutions.com> /dts-v1/; #include "sun50i-a64.dtsi" +#include "sun50i-a64-cpu-opp.dtsi" #include <dt-bindings/gpio/gpio.h> @@ -65,6 +64,22 @@ }; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&cpu1 { + cpu-supply = <®_dcdc2>; +}; + +&cpu2 { + cpu-supply = <®_dcdc2>; +}; + +&cpu3 { + cpu-supply = <®_dcdc2>; +}; + &csi { status = "okay"; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts index 208373efee49..883f217efb81 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts @@ -1,48 +1,10 @@ -/* - * Copyright (c) 2016 ARM Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (c) 2016 ARM Ltd. /dts-v1/; #include "sun50i-a64.dtsi" +#include "sun50i-a64-cpu-opp.dtsi" #include <dt-bindings/gpio/gpio.h> @@ -108,6 +70,22 @@ status = "okay"; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&cpu1 { + cpu-supply = <®_dcdc2>; +}; + +&cpu2 { + cpu-supply = <®_dcdc2>; +}; + +&cpu3 { + cpu-supply = <®_dcdc2>; +}; + &dai { status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-cpu-opp.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-cpu-opp.dtsi new file mode 100644 index 000000000000..578c37490d90 --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-cpu-opp.dtsi @@ -0,0 +1,75 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2020 Vasily khoruzhick <anarsoul@gmail.com> + */ + +/ { + cpu0_opp_table: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-648000000 { + opp-hz = /bits/ 64 <648000000>; + opp-microvolt = <1040000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp-816000000 { + opp-hz = /bits/ 64 <816000000>; + opp-microvolt = <1100000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp-912000000 { + opp-hz = /bits/ 64 <912000000>; + opp-microvolt = <1120000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp-960000000 { + opp-hz = /bits/ 64 <960000000>; + opp-microvolt = <1160000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp-1008000000 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <1200000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp-1056000000 { + opp-hz = /bits/ 64 <1056000000>; + opp-microvolt = <1240000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp-1104000000 { + opp-hz = /bits/ 64 <1104000000>; + opp-microvolt = <1260000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp-1152000000 { + opp-hz = /bits/ 64 <1152000000>; + opp-microvolt = <1300000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + }; +}; + +&cpu0 { + operating-points-v2 = <&cpu0_opp_table>; +}; + +&cpu1 { + operating-points-v2 = <&cpu0_opp_table>; +}; + +&cpu2 { + operating-points-v2 = <&cpu0_opp_table>; +}; + +&cpu3 { + operating-points-v2 = <&cpu0_opp_table>; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts index 9b9d9157128c..e58db8a6cab6 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts @@ -1,48 +1,10 @@ -/* - * Copyright (C) 2017 Jagan Teki <jteki@openedev.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2017 Jagan Teki <jteki@openedev.com> /dts-v1/; #include "sun50i-a64.dtsi" +#include "sun50i-a64-cpu-opp.dtsi" #include <dt-bindings/gpio/gpio.h> @@ -87,6 +49,22 @@ }; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&cpu1 { + cpu-supply = <®_dcdc2>; +}; + +&cpu2 { + cpu-supply = <®_dcdc2>; +}; + +&cpu3 { + cpu-supply = <®_dcdc2>; +}; + &de { status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts index 787ebd805a3b..577f9e1d08a1 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts @@ -1,9 +1,7 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (C) 2019 Oceanic Systems (UK) Ltd. - * Copyright (C) 2019 Amarula Solutions B.V. - * Author: Jagan Teki <jagan@amarulasolutions.com> - */ +// Copyright (C) 2019 Oceanic Systems (UK) Ltd. +// Copyright (C) 2019 Amarula Solutions B.V. +// Author: Jagan Teki <jagan@amarulasolutions.com> /dts-v1/; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino-emmc.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino-emmc.dts index 96ab0227e82d..efb20846de49 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino-emmc.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino-emmc.dts @@ -1,8 +1,6 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (C) 2018 Martin Ayotte <martinayotte@gmail.com> - * Copyright (C) 2019 Sunil Mohan Adapa <sunil@medhas.org> - */ +// Copyright (C) 2018 Martin Ayotte <martinayotte@gmail.com> +// Copyright (C) 2019 Sunil Mohan Adapa <sunil@medhas.org> #include "sun50i-a64-olinuxino.dts" @@ -15,9 +13,13 @@ pinctrl-names = "default"; pinctrl-0 = <&mmc2_pins>; vmmc-supply = <®_dcdc1>; - vqmmc-supply = <®_dcdc1>; + vqmmc-supply = <®_eldo1>; bus-width = <8>; non-removable; cap-mmc-hw-reset; status = "okay"; }; + +&pio { + vcc-pc-supply = <®_eldo1>; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts index 01a9a52edae4..6dfafa1c879b 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts @@ -1,48 +1,10 @@ -/* - * Copyright (C) 2017 Jagan Teki <jteki@openedev.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2017 Jagan Teki <jteki@openedev.com> /dts-v1/; #include "sun50i-a64.dtsi" +#include "sun50i-a64-cpu-opp.dtsi" #include <dt-bindings/gpio/gpio.h> @@ -87,6 +49,22 @@ }; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&cpu1 { + cpu-supply = <®_dcdc2>; +}; + +&cpu2 { + cpu-supply = <®_dcdc2>; +}; + +&cpu3 { + cpu-supply = <®_dcdc2>; +}; + &de { status = "okay"; }; @@ -140,7 +118,7 @@ &mmc1 { pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; - vmmc-supply = <®_aldo2>; + vmmc-supply = <®_dcdc1>; vqmmc-supply = <®_dldo4>; mmc-pwrseq = <&wifi_pwrseq>; bus-width = <4>; @@ -163,6 +141,23 @@ status = "okay"; }; +&pio { + vcc-pc-supply = <®_dcdc1>; + vcc-pd-supply = <®_dcdc1>; + vcc-pe-supply = <®_aldo1>; + vcc-pg-supply = <®_dldo4>; +}; + +&r_pio { + /* + * FIXME: We can't add that supply for now since it would + * create a circular dependency between pinctrl, the regulator + * and the RSB Bus. + * + * vcc-pl-supply = <®_aldo2>; + */ +}; + &r_rsb { status = "okay"; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts index f54a415f2e3b..fde9c7a99b17 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts @@ -1,49 +1,11 @@ -/* - * Copyright (C) 2017 Jagan Teki <jteki@openedev.com> - * Copyright (C) 2017-2018 Samuel Holland <samuel@sholland.org> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2017 Jagan Teki <jteki@openedev.com> +// Copyright (C) 2017-2018 Samuel Holland <samuel@sholland.org> /dts-v1/; #include "sun50i-a64.dtsi" +#include "sun50i-a64-cpu-opp.dtsi" #include <dt-bindings/gpio/gpio.h> @@ -123,6 +85,22 @@ status = "okay"; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&cpu1 { + cpu-supply = <®_dcdc2>; +}; + +&cpu2 { + cpu-supply = <®_dcdc2>; +}; + +&cpu3 { + cpu-supply = <®_dcdc2>; +}; + &dai { status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts index 72d6961dc312..302e24be0a31 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts @@ -1,8 +1,5 @@ -/* - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) - * - * Copyright (c) 2018 ARM Ltd. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (c) 2018 ARM Ltd. #include "sun50i-a64-sopine-baseboard.dts" diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts index d5b6e8159a33..b26181cf9095 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts @@ -1,44 +1,5 @@ -/* - * Copyright (c) 2016 ARM Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (c) 2016 ARM Ltd. #include "sun50i-a64-pine64.dts" diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts index 409523cb0950..2165f238af13 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts @@ -1,48 +1,10 @@ -/* - * Copyright (c) 2016 ARM Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (c) 2016 ARM Ltd. /dts-v1/; #include "sun50i-a64.dtsi" +#include "sun50i-a64-cpu-opp.dtsi" #include <dt-bindings/gpio/gpio.h> @@ -84,6 +46,22 @@ status = "okay"; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&cpu1 { + cpu-supply = <®_dcdc2>; +}; + +&cpu2 { + cpu-supply = <®_dcdc2>; +}; + +&cpu3 { + cpu-supply = <®_dcdc2>; +}; + &dai { status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts index 78c82a665c84..3d894b208901 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts @@ -1,15 +1,14 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz> - * Copyright (C) 2018 Vasily Khoruzhick <anarsoul@gmail.com> - * - */ +// Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz> +// Copyright (C) 2018 Vasily Khoruzhick <anarsoul@gmail.com> /dts-v1/; #include "sun50i-a64.dtsi" +#include "sun50i-a64-cpu-opp.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/gpio-keys.h> #include <dt-bindings/input/input.h> #include <dt-bindings/pwm/pwm.h> @@ -60,6 +59,7 @@ linux,code = <SW_LID>; linux,can-disable; wakeup-source; + wakeup-event-action = <EV_ACT_DEASSERTED>; }; }; @@ -98,6 +98,22 @@ status = "okay"; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&cpu1 { + cpu-supply = <®_dcdc2>; +}; + +&cpu2 { + cpu-supply = <®_dcdc2>; +}; + +&cpu3 { + cpu-supply = <®_dcdc2>; +}; + &dai { status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts index 920103ec0046..2f6ea9f3f6a2 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts @@ -1,47 +1,7 @@ -/* - * Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.xyz> - * - * Based on sun50i-a64-pine64.dts, which is: - * Copyright (c) 2016 ARM Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.xyz> +// Based on sun50i-a64-pine64.dts, which is: +// Copyright (c) 2016 ARM Ltd. /dts-v1/; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi index 9d20e13f0c02..c48692b06e1f 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi @@ -1,49 +1,10 @@ -/* - * Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.xyz> - * - * Based on sun50i-a64-pine64.dts, which is: - * Copyright (c) 2016 ARM Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.xyz> +// Based on sun50i-a64-pine64.dts, which is: +// Copyright (c) 2016 ARM Ltd. #include "sun50i-a64.dtsi" +#include "sun50i-a64-cpu-opp.dtsi" #include <dt-bindings/gpio/gpio.h> @@ -51,6 +12,22 @@ cpvdd-supply = <®_eldo1>; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&cpu1 { + cpu-supply = <®_dcdc2>; +}; + +&cpu2 { + cpu-supply = <®_dcdc2>; +}; + +&cpu3 { + cpu-supply = <®_dcdc2>; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts index 970415106dcf..f5df5f705b72 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts @@ -1,13 +1,11 @@ -/* - * Copyright (C) Harald Geyer <harald@ccbib.org> - * based on sun50i-a64-olinuxino.dts by Jagan Teki <jteki@openedev.com> - * - * SPDX-License-Identifier: (GPL-2.0 OR MIT) - */ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// Copyright (C) Harald Geyer <harald@ccbib.org> +// based on sun50i-a64-olinuxino.dts by Jagan Teki <jteki@openedev.com> /dts-v1/; #include "sun50i-a64.dtsi" +#include "sun50i-a64-cpu-opp.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> @@ -104,6 +102,22 @@ status = "okay"; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&cpu1 { + cpu-supply = <®_dcdc2>; +}; + +&cpu2 { + cpu-supply = <®_dcdc2>; +}; + +&cpu3 { + cpu-supply = <®_dcdc2>; +}; + &ehci1 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index 27e48234f1c2..862b47dc9dc9 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -1,46 +1,7 @@ -/* - * Copyright (C) 2016 ARM Ltd. - * based on the Allwinner H3 dtsi: - * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2016 ARM Ltd. +// based on the Allwinner H3 dtsi: +// Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com> #include <dt-bindings/clock/sun50i-a64-ccu.h> #include <dt-bindings/clock/sun8i-de2.h> @@ -49,6 +10,7 @@ #include <dt-bindings/reset/sun50i-a64-ccu.h> #include <dt-bindings/reset/sun8i-de2.h> #include <dt-bindings/reset/sun8i-r-ccu.h> +#include <dt-bindings/thermal/thermal.h> / { interrupt-parent = <&gic>; @@ -89,6 +51,9 @@ reg = <0>; enable-method = "psci"; next-level-cache = <&L2>; + clocks = <&ccu 21>; + clock-names = "cpu"; + #cooling-cells = <2>; }; cpu1: cpu@1 { @@ -97,6 +62,9 @@ reg = <1>; enable-method = "psci"; next-level-cache = <&L2>; + clocks = <&ccu 21>; + clock-names = "cpu"; + #cooling-cells = <2>; }; cpu2: cpu@2 { @@ -105,6 +73,9 @@ reg = <2>; enable-method = "psci"; next-level-cache = <&L2>; + clocks = <&ccu 21>; + clock-names = "cpu"; + #cooling-cells = <2>; }; cpu3: cpu@3 { @@ -113,6 +84,9 @@ reg = <3>; enable-method = "psci"; next-level-cache = <&L2>; + clocks = <&ccu 21>; + clock-names = "cpu"; + #cooling-cells = <2>; }; L2: l2-cache { @@ -211,6 +185,69 @@ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; + thermal-zones { + cpu_thermal: cpu0-thermal { + /* milliseconds */ + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 0>; + + cooling-maps { + map0 { + trip = <&cpu_alert0>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu_alert1>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + cpu_alert0: cpu_alert0 { + /* milliCelsius */ + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_alert1: cpu_alert1 { + /* milliCelsius */ + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpu_crit: cpu_crit { + /* milliCelsius */ + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + gpu0_thermal: gpu0-thermal { + /* milliseconds */ + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 1>; + }; + + gpu1_thermal: gpu1-thermal { + /* milliseconds */ + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 2>; + }; + }; + soc { compatible = "simple-bus"; #address-cells = <1>; @@ -382,6 +419,12 @@ #address-cells = <1>; #size-cells = <0>; reg = <1>; + + tcon0_out_dsi: endpoint@1 { + reg = <1>; + remote-endpoint = <&dsi_in_tcon0>; + allwinner,tcon-channel = <1>; + }; }; }; }; @@ -485,6 +528,12 @@ sid: eeprom@1c14000 { compatible = "allwinner,sun50i-a64-sid"; reg = <0x1c14000 0x400>; + #address-cells = <1>; + #size-cells = <1>; + + ths_calibration: thermal-sensor-calibration@34 { + reg = <0x34 0x8>; + }; }; crypto: crypto@1c15000 { @@ -593,7 +642,7 @@ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu 58>, <&osc24M>, <&rtc 0>; + clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>; clock-names = "apb", "hosc", "losc"; gpio-controller; #gpio-cells = <3>; @@ -810,6 +859,18 @@ status = "disabled"; }; + ths: thermal-sensor@1c25000 { + compatible = "allwinner,sun50i-a64-ths"; + reg = <0x01c25000 0x100>; + clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>; + clock-names = "bus", "mod"; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + resets = <&ccu RST_BUS_THS>; + nvmem-cells = <&ths_calibration>; + nvmem-cell-names = "calibration"; + #thermal-sensor-cells = <1>; + }; + uart0: serial@1c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; @@ -1014,6 +1075,37 @@ status = "disabled"; }; + dsi: dsi@1ca0000 { + compatible = "allwinner,sun50i-a64-mipi-dsi"; + reg = <0x01ca0000 0x1000>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_MIPI_DSI>; + resets = <&ccu RST_BUS_MIPI_DSI>; + phys = <&dphy>; + phy-names = "dphy"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + + port { + dsi_in_tcon0: endpoint { + remote-endpoint = <&tcon0_out_dsi>; + }; + }; + }; + + dphy: d-phy@1ca1000 { + compatible = "allwinner,sun50i-a64-mipi-dphy", + "allwinner,sun6i-a31-mipi-dphy"; + reg = <0x01ca1000 0x1000>; + clocks = <&ccu CLK_BUS_MIPI_DSI>, + <&ccu CLK_DSI_DPHY>; + clock-names = "bus", "mod"; + resets = <&ccu RST_BUS_MIPI_DSI>; + status = "disabled"; + #phy-cells = <0>; + }; + hdmi: hdmi@1ee0000 { compatible = "allwinner,sun50i-a64-dw-hdmi", "allwinner,sun8i-a83t-dw-hdmi"; @@ -1051,7 +1143,7 @@ compatible = "allwinner,sun50i-a64-hdmi-phy"; reg = <0x01ef0000 0x10000>; clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>, - <&ccu 7>; + <&ccu CLK_PLL_VIDEO0>; clock-names = "bus", "mod", "pll-0"; resets = <&ccu RST_BUS_HDMI0>; reset-names = "phy"; @@ -1081,7 +1173,8 @@ r_ccu: clock@1f01400 { compatible = "allwinner,sun50i-a64-r-ccu"; reg = <0x01f01400 0x100>; - clocks = <&osc24M>, <&rtc 0>, <&rtc 2>, <&ccu 11>; + clocks = <&osc24M>, <&rtc 0>, <&rtc 2>, + <&ccu CLK_PLL_PERIPH0>; clock-names = "hosc", "losc", "iosc", "pll-periph"; #clock-cells = <1>; #reset-cells = <1>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts index c924090331d0..076a0b983101 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts @@ -1,8 +1,8 @@ // SPDX-License-Identifier: GPL-2.0-or-later OR MIT +// Copyright (C) 2018 Aleksandr Aleksandrov <aleksandr.aleksandrov@emlid.com> + /* * DTS for Emlid Neutis N5 Dev board. - * - * Copyright (C) 2018 Aleksandr Aleksandrov <aleksandr.aleksandrov@emlid.com> */ /dts-v1/; @@ -15,14 +15,6 @@ "emlid,neutis-n5", "allwinner,sun50i-h5"; - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - connector { compatible = "hdmi-connector"; type = "a"; @@ -34,16 +26,6 @@ }; }; - reg_usb0_vbus: usb0-vbus { - compatible = "regulator-fixed"; - regulator-name = "usb0-vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */ - status = "okay"; - }; - vdd_cpux: gpio-regulator { compatible = "regulator-gpio"; regulator-name = "vdd-cpux"; @@ -59,33 +41,11 @@ }; }; -&codec { - allwinner,audio-routing = - "Line Out", "LINEOUT", - "LINEIN", "Line In", - "MIC1", "Mic", - "MIC2", "Mic", - "Mic", "MBIAS"; - status = "okay"; -}; - -&de { - status = "okay"; -}; - -&ehci0 { - status = "okay"; +&cpu0 { + cpu-supply = <&vdd_cpux>; }; -&ehci1 { - status = "okay"; -}; - -&ehci2 { - status = "okay"; -}; - -&ehci3 { +&codec { status = "okay"; }; @@ -106,42 +66,6 @@ }; }; -&mmc0 { - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ - status = "okay"; -}; - -&ohci0 { - status = "okay"; -}; - -&ohci1 { - status = "okay"; -}; - -&ohci2 { - status = "okay"; -}; - -&ohci3 { - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pa_pins>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "otg"; - status = "okay"; -}; - -&usbphy { - usb0_id_det-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ - usb0_vbus-supply = <®_usb0_vbus>; +&i2c1 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi index 5bec574fa108..fc570011495f 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi @@ -1,73 +1,11 @@ // SPDX-License-Identifier: GPL-2.0-or-later OR MIT +// Copyright (C) 2018 Aleksandr Aleksandrov <aleksandr.aleksandrov@emlid.com> + /* * DTSI for Emlid Neutis N5 SoM. - * - * Copyright (C) 2018 Aleksandr Aleksandrov <aleksandr.aleksandrov@emlid.com> */ /dts-v1/; #include "sun50i-h5.dtsi" - -#include <dt-bindings/gpio/gpio.h> - -/ { - reg_vcc3v3: vcc3v3 { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - wifi_pwrseq: wifi_pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&pio 2 7 GPIO_ACTIVE_LOW>; /* PC7 */ - post-power-on-delay-ms = <200>; - clocks = <&rtc 1>; - clock-names = "ext_clock"; - }; -}; - -&mmc1 { - vmmc-supply = <®_vcc3v3>; - vqmmc-supply = <®_vcc3v3>; - mmc-pwrseq = <&wifi_pwrseq>; - bus-width = <4>; - non-removable; - status = "okay"; - - brcmf: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - interrupt-parent = <&r_pio>; - interrupts = <0 5 IRQ_TYPE_LEVEL_LOW>; /* PL5 */ - interrupt-names = "host-wake"; - }; -}; - -&mmc2 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_8bit_pins>; - vmmc-supply = <®_vcc3v3>; - bus-width = <8>; - non-removable; - cap-mmc-hw-reset; - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; - uart-has-rtscts; - status = "okay"; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - clocks = <&rtc 1>; - clock-names = "lpo"; - vbat-supply = <®_vcc3v3>; - vddio-supply = <®_vcc3v3>; - shutdown-gpios = <&pio 2 4 GPIO_ACTIVE_HIGH>; /* PC4 */ - device-wakeup-gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */ - }; -}; +#include <arm/sunxi-h3-h5-emlid-neutis.dtsi> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts index d68bdfea2271..64d35daf2023 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts @@ -1,8 +1,6 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (C) 2018 BayLibre, SAS - * Author: Neil Armstrong <narmstrong@baylibre.com> - */ +// Copyright (C) 2018 BayLibre, SAS +// Author: Neil Armstrong <narmstrong@baylibre.com> /dts-v1/; #include "sun50i-h5.dtsi" diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-it.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-it.dts new file mode 100644 index 000000000000..e59d68b525fc --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-it.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2019 Chen-Yu Tsai <wens@csie.org> + +/dts-v1/; +#include "sun50i-h5.dtsi" +#include <arm/sunxi-libretech-all-h3-it.dtsi> + +/ { + model = "Libre Computer Board ALL-H3-IT H5"; + compatible = "libretech,all-h3-it-h5", "allwinner,sun50i-h5"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h5-cc.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h5-cc.dts new file mode 100644 index 000000000000..df1b9263ad0e --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h5-cc.dts @@ -0,0 +1,61 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2020 Chen-Yu Tsai <wens@csie.org> + +#include "sun50i-h5-libretech-all-h3-cc.dts" + +/ { + model = "Libre Computer Board ALL-H5-CC H5"; + compatible = "libretech,all-h5-cc-h5", "allwinner,sun50i-h5"; + + aliases { + spi0 = &spi0; + }; + + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <5000>; + enable-active-high; + gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; + vin-supply = <®_vcc5v0>; + }; +}; + +&codec { + /* No line out; only onboard microphone */ + allwinner,audio-routing = + "MIC1", "Mic", + "Mic", "MBIAS"; +}; + +/* This board has external PHY */ +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_rgmii_pins>; + phy-supply = <®_gmac_3v3>; + phy-handle = <&ext_rgmii_phy>; + phy-mode = "rgmii"; + /delete-property/ allwinner,leds-active-low; + status = "okay"; +}; + +&external_mdio { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + }; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts index 1c7dde84e54d..4f9ba53ffaae 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts @@ -1,45 +1,6 @@ -/* - * Copyright (C) 2017 Antony Antony <antony@phenome.org> - * Copyright (C) 2016 ARM Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2017 Antony Antony <antony@phenome.org> +// Copyright (C) 2016 ARM Ltd. /dts-v1/; #include "sun50i-h5.dtsi" diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts index 57a6f45036c1..b059e20813bd 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts @@ -1,44 +1,5 @@ -/* - * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io> /dts-v1/; #include "sun50i-h5.dtsi" diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts index e126c1c9f05c..70b5f0998421 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts @@ -1,44 +1,5 @@ -/* - * Copyright (C) 2016 ARM Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2016 ARM Ltd. /dts-v1/; #include "sun50i-h5.dtsi" diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts index d9b3ed257088..cb44bfa5981f 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts @@ -1,47 +1,7 @@ -/* - * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz> - * - * Based on sun50i-h5-orangepi-pc2.dts, which is: - * Copyright (C) 2016 ARM Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz> +// Based on sun50i-h5-orangepi-pc2.dts, which is: +// Copyright (C) 2016 ARM Ltd. /dts-v1/; #include "sun50i-h5.dtsi" diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts index db6ea7b58999..ef5ca6444220 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts @@ -1,9 +1,6 @@ -/* - * Copyright (C) 2016 ARM Ltd. - * Copyright (C) 2018 Hauke Mehrtens <hauke@hauke-m.de> - * - * SPDX-License-Identifier: (GPL-2.0+ OR X11) - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2016 ARM Ltd. +// Copyright (C) 2018 Hauke Mehrtens <hauke@hauke-m.de> /dts-v1/; #include "sun50i-h5.dtsi" diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts index dacf61399527..c95a68541309 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts @@ -1,44 +1,5 @@ -/* - * Copyright (C) 2017 Jagan Teki <jteki@openedev.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2017 Jagan Teki <jteki@openedev.com> /dts-v1/; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi index e92c4de5bf3b..9893aa64dd0b 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi @@ -1,44 +1,5 @@ -/* - * Copyright (C) 2016 ARM Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2016 ARM Ltd. #include <arm/sunxi-h3-h5.dtsi> @@ -54,21 +15,21 @@ enable-method = "psci"; }; - cpu@1 { + cpu1: cpu@1 { compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <1>; enable-method = "psci"; }; - cpu@2 { + cpu2: cpu@2 { compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <2>; enable-method = "psci"; }; - cpu@3 { + cpu3: cpu@3 { compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <3>; @@ -76,6 +37,16 @@ }; }; + pmu { + compatible = "arm,cortex-a53-pmu", + "arm,armv8-pmuv3"; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + psci { compatible = "arm,psci-0.2"; method = "smc"; @@ -176,6 +147,32 @@ assigned-clocks = <&ccu CLK_GPU>; assigned-clock-rates = <384000000>; }; + + ths: thermal-sensor@1c25000 { + compatible = "allwinner,sun50i-h5-ths"; + reg = <0x01c25000 0x400>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + resets = <&ccu RST_BUS_THS>; + clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>; + clock-names = "bus", "mod"; + nvmem-cells = <&ths_calibration>; + nvmem-cell-names = "calibration"; + #thermal-sensor-cells = <1>; + }; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 0>; + }; + + gpu_thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 1>; + }; }; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts index f335f7482a73..df6d872c34e2 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts @@ -1,7 +1,5 @@ -// SPDX-License-Identifier: (GPL-2.0+ or MIT) -/* - * Copyright (C) 2019 Clément Péron <peron.clem@gmail.com> - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2019 Clément Péron <peron.clem@gmail.com> /dts-v1/; @@ -76,6 +74,10 @@ status = "okay"; }; +&dwc3 { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -292,3 +294,7 @@ usb0_vbus-supply = <®_vcc5v>; status = "okay"; }; + +&usb3phy { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts index 4ed3fc2c7734..c311eee52a35 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts @@ -1,7 +1,5 @@ -// SPDX-License-Identifier: (GPL-2.0+ or MIT) -/* - * Copyright (C) 2019 OndÅ™ej Jirman <megous@megous.com> - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2019 OndÅ™ej Jirman <megous@megous.com> /dts-v1/; @@ -274,6 +272,10 @@ }; }; +&r_ir { + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_ph_pins>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts index e098a2475f2d..e7ca75c0d0f7 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts @@ -1,7 +1,5 @@ -// SPDX-License-Identifier: (GPL-2.0+ or MIT) -/* - * Copyright (C) 2018 Jagan Teki <jagan@openedev.com> - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2018 Jagan Teki <jagan@openedev.com> #include "sun50i-h6-orangepi.dtsi" diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts index 12e17567ab56..83aab7368889 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts @@ -1,8 +1,6 @@ -// SPDX-License-Identifier: (GPL-2.0+ or MIT) -/* - * Copyright (C) 2018 Amarula Solutions - * Author: Jagan Teki <jagan@amarulasolutions.com> - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2018 Amarula Solutions +// Author: Jagan Teki <jagan@amarulasolutions.com> #include "sun50i-h6-orangepi.dtsi" diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi index df4cbd7ef96c..37f4c57597d4 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi @@ -1,8 +1,6 @@ -// SPDX-License-Identifier: (GPL-2.0+ or MIT) -/* - * Copyright (C) 2018 Amarula Solutions - * Author: Jagan Teki <jagan@amarulasolutions.com> - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2018 Amarula Solutions +// Author: Jagan Teki <jagan@amarulasolutions.com> /dts-v1/; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts new file mode 100644 index 000000000000..f4c8966a6497 --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: (GPL-2.0+ or MIT) +/* + * Copyright (C) 2019 Corentin LABBE <clabbe@baylibre.com> + */ + +#include "sun50i-h6-pine-h64.dts" + +/ { + model = "Pine H64 model B"; + compatible = "pine64,pine-h64-model-b", "allwinner,sun50i-h6"; + + /delete-node/ reg_gmac_3v3; +}; + +&hdmi_connector { + /delete-property/ ddc-en-gpios; +}; + +&emac { + phy-supply = <®_aldo2>; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts index 74899ede00fb..d1c2aa5b3a20 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts @@ -1,7 +1,5 @@ -// SPDX-License-Identifier: (GPL-2.0+ or MIT) -/* - * Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.io> - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.io> /dts-v1/; @@ -10,7 +8,7 @@ #include <dt-bindings/gpio/gpio.h> / { - model = "Pine H64"; + model = "Pine H64 model A"; compatible = "pine64,pine-h64", "allwinner,sun50i-h6"; aliases { @@ -22,9 +20,10 @@ stdout-path = "serial0:115200n8"; }; - connector { + hdmi_connector: connector { compatible = "hdmi-connector"; type = "a"; + ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */ port { hdmi_con_in: endpoint { @@ -52,6 +51,16 @@ }; }; + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc-gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + reg_usb_vbus: vbus { compatible = "regulator-fixed"; regulator-name = "usb-vbus"; @@ -68,7 +77,7 @@ pinctrl-0 = <&ext_rgmii_pins>; phy-mode = "rgmii"; phy-handle = <&ext_rgmii_phy>; - phy-supply = <®_aldo2>; + phy-supply = <®_gmac_3v3>; allwinner,rx-delay-ps = <200>; allwinner,tx-delay-ps = <200>; status = "okay"; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts index bccfe1e65b6a..83e6cb0e59ce 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts @@ -1,7 +1,5 @@ -// SPDX-License-Identifier: (GPL-2.0+ or MIT) -/* - * Copyright (c) 2019 Jernej Skrabec <jernej.skrabec@siol.net> - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (c) 2019 Jernej Skrabec <jernej.skrabec@siol.net> /dts-v1/; @@ -45,6 +43,10 @@ status = "okay"; }; +&dwc3 { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -85,6 +87,7 @@ }; &r_ir { + linux,rc-map-name = "rc-tanix-tx5max"; status = "okay"; }; @@ -102,3 +105,7 @@ &usb2phy { status = "okay"; }; + +&usb3phy { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi index 29824081b43b..3329283e38ab 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi @@ -1,7 +1,5 @@ -// SPDX-License-Identifier: (GPL-2.0+ or MIT) -/* - * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io> - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/sun50i-h6-ccu.h> @@ -11,6 +9,7 @@ #include <dt-bindings/reset/sun50i-h6-ccu.h> #include <dt-bindings/reset/sun50i-h6-r-ccu.h> #include <dt-bindings/reset/sun8i-de2.h> +#include <dt-bindings/thermal/thermal.h> / { interrupt-parent = <&gic>; @@ -70,6 +69,16 @@ clock-output-names = "ext_osc32k"; }; + pmu { + compatible = "arm,cortex-a53-pmu", + "arm,armv8-pmuv3"; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + psci { compatible = "arm,psci-0.2"; method = "smc"; @@ -233,6 +242,12 @@ sid: efuse@3006000 { compatible = "allwinner,sun50i-h6-sid"; reg = <0x03006000 0x400>; + #address-cells = <1>; + #size-cells = <1>; + + ths_calibration: thermal-sensor-calibration@14 { + reg = <0x14 0x8>; + }; }; watchdog: watchdog@30090a0 { @@ -245,6 +260,16 @@ status = "disabled"; }; + pwm: pwm@300a000 { + compatible = "allwinner,sun50i-h6-pwm"; + reg = <0x0300a000 0x400>; + clocks = <&osc24M>, <&ccu CLK_BUS_PWM>; + clock-names = "mod", "bus"; + resets = <&ccu RST_BUS_PWM>; + #pwm-cells = <3>; + status = "disabled"; + }; + pio: pinctrl@300b000 { compatible = "allwinner,sun50i-h6-pinctrl"; reg = <0x0300b000 0x400>; @@ -856,5 +881,31 @@ #address-cells = <1>; #size-cells = <0>; }; + + ths: thermal-sensor@5070400 { + compatible = "allwinner,sun50i-h6-ths"; + reg = <0x05070400 0x100>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_THS>; + clock-names = "bus"; + resets = <&ccu RST_BUS_THS>; + nvmem-cells = <&ths_calibration>; + nvmem-cell-names = "calibration"; + #thermal-sensor-cells = <1>; + }; + }; + + thermal-zones { + cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 0>; + }; + + gpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 1>; + }; }; }; diff --git a/arch/arm64/boot/dts/altera/Makefile b/arch/arm64/boot/dts/altera/Makefile index 27bb925adc8d..10119c7ab437 100644 --- a/arch/arm64/boot/dts/altera/Makefile +++ b/arch/arm64/boot/dts/altera/Makefile @@ -1,2 +1,3 @@ # SPDX-License-Identifier: GPL-2.0-only -dtb-$(CONFIG_ARCH_STRATIX10) += socfpga_stratix10_socdk.dtb +dtb-$(CONFIG_ARCH_STRATIX10) += socfpga_stratix10_socdk.dtb \ + socfpga_stratix10_socdk_nand.dtb diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi index 144a2c19ac02..d1fc9c2055f4 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi @@ -61,10 +61,10 @@ pmu { compatible = "arm,armv8-pmuv3"; - interrupts = <0 120 8>, - <0 121 8>, - <0 122 8>, - <0 123 8>; + interrupts = <0 170 4>, + <0 171 4>, + <0 172 4>, + <0 173 4>; interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts new file mode 100644 index 000000000000..9946515b8afd --- /dev/null +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts @@ -0,0 +1,223 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright Altera Corporation (C) 2015. All rights reserved. + */ + +#include "socfpga_stratix10.dtsi" + +/ { + model = "SoCFPGA Stratix 10 SoCDK"; + + aliases { + serial0 = &uart0; + ethernet0 = &gmac0; + ethernet1 = &gmac1; + ethernet2 = &gmac2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + hps0 { + label = "hps_led0"; + gpios = <&portb 20 GPIO_ACTIVE_HIGH>; + }; + + hps1 { + label = "hps_led1"; + gpios = <&portb 19 GPIO_ACTIVE_HIGH>; + }; + + hps2 { + label = "hps_led2"; + gpios = <&portb 21 GPIO_ACTIVE_HIGH>; + }; + }; + + memory { + device_type = "memory"; + /* We expect the bootloader to fill in the reg */ + reg = <0 0 0 0>; + }; + + ref_033v: 033-v-ref { + compatible = "regulator-fixed"; + regulator-name = "0.33V"; + regulator-min-microvolt = <330000>; + regulator-max-microvolt = <330000>; + }; + + soc { + clocks { + osc1 { + clock-frequency = <25000000>; + }; + }; + + eccmgr { + sdmmca-ecc@ff8c8c00 { + compatible = "altr,socfpga-s10-sdmmc-ecc", + "altr,socfpga-sdmmc-ecc"; + reg = <0xff8c8c00 0x100>; + altr,ecc-parent = <&mmc>; + interrupts = <14 4>, + <15 4>; + }; + }; + }; +}; + +&gpio1 { + status = "okay"; +}; + +&gmac2 { + status = "okay"; + phy-mode = "rgmii"; + phy-handle = <&phy0>; + + max-frame-size = <9000>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy0: ethernet-phy@0 { + reg = <4>; + + txd0-skew-ps = <0>; /* -420ps */ + txd1-skew-ps = <0>; /* -420ps */ + txd2-skew-ps = <0>; /* -420ps */ + txd3-skew-ps = <0>; /* -420ps */ + rxd0-skew-ps = <420>; /* 0ps */ + rxd1-skew-ps = <420>; /* 0ps */ + rxd2-skew-ps = <420>; /* 0ps */ + rxd3-skew-ps = <420>; /* 0ps */ + txen-skew-ps = <0>; /* -420ps */ + txc-skew-ps = <900>; /* 0ps */ + rxdv-skew-ps = <420>; /* 0ps */ + rxc-skew-ps = <1680>; /* 780ps */ + }; + }; +}; + +&nand { + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + nand-bus-width = <16>; + + partition@0 { + label = "u-boot"; + reg = <0 0x200000>; + }; + + partition@200000 { + label = "env"; + reg = <0x200000 0x40000>; + }; + + partition@240000 { + label = "dtb"; + reg = <0x240000 0x40000>; + }; + + partition@280000 { + label = "kernel"; + reg = <0x280000 0x2000000>; + }; + + partition@2280000 { + label = "misc"; + reg = <0x2280000 0x2000000>; + }; + + partition@4280000 { + label = "rootfs"; + reg = <0x4280000 0x3bd80000>; + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +&usb0 { + status = "okay"; + disable-over-current; +}; + +&watchdog0 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; + clock-frequency = <100000>; + i2c-sda-falling-time-ns = <890>; /* hcnt */ + i2c-sdl-falling-time-ns = <890>; /* lcnt */ + + adc@14 { + compatible = "lltc,ltc2497"; + reg = <0x14>; + vref-supply = <&ref_033v>; + }; + + temp@4c { + compatible = "maxim,max1619"; + reg = <0x4c>; + }; + + eeprom@51 { + compatible = "atmel,24c32"; + reg = <0x51>; + pagesize = <32>; + }; + + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; +}; + +&qspi { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "n25q00a"; + reg = <0>; + spi-max-frequency = <100000000>; + + m25p,fast-read; + cdns,page-size = <256>; + cdns,block-size = <16>; + cdns,read-delay = <1>; + cdns,tshsl-ns = <50>; + cdns,tsd2d-ns = <50>; + cdns,tchsh-ns = <4>; + cdns,tslch-ns = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + qspi_boot: partition@0 { + label = "Boot and fpga data"; + reg = <0x0 0x034B0000>; + }; + + qspi_rootfs: partition@4000000 { + label = "Root Filesystem - JFFS2"; + reg = <0x034B0000 0x0EB50000>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index 63400538d39f..eef0045320f2 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-khadas-vim3.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-s922x-khadas-vim3.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-ugoos-am6.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-kii-pro.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nanopi-k2.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nexbox-a95x.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-odroidc2.dtb @@ -29,11 +30,13 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-phicomm-n1.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s805x-p241.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-p281.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-tx3-mini.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-libretech-pc.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-khadas-vim2.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-nexbox-a1.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q201.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-rbox-pro.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-libretech-pc.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi index 7210ad049d1d..4dec518c4dde 100644 --- a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi @@ -5,6 +5,7 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/gpio/meson-a1-gpio.h> / { compatible = "amlogic,a1"; @@ -74,6 +75,30 @@ #size-cells = <2>; ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x1000000>; + + reset: reset-controller@0 { + compatible = "amlogic,meson-a1-reset"; + reg = <0x0 0x0 0x0 0x8c>; + #reset-cells = <1>; + }; + + periphs_pinctrl: pinctrl@0400 { + compatible = "amlogic,meson-a1-periphs-pinctrl"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio: bank@0400 { + reg = <0x0 0x0400 0x0 0x003c>, + <0x0 0x0480 0x0 0x0118>; + reg-names = "mux", "gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 0 62>; + }; + + }; + uart_AO: serial@1c00 { compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi index 04803c3bccfa..aace3d32a3df 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi @@ -1169,6 +1169,7 @@ interrupts = <GIC_SPI 84 IRQ_TYPE_EDGE_RISING>; clocks = <&clkc_audio AUD_CLKID_TODDR_A>; resets = <&arb AXG_ARB_TODDR_A>; + amlogic,fifo-depth = <512>; status = "disabled"; }; @@ -1180,6 +1181,7 @@ interrupts = <GIC_SPI 85 IRQ_TYPE_EDGE_RISING>; clocks = <&clkc_audio AUD_CLKID_TODDR_B>; resets = <&arb AXG_ARB_TODDR_B>; + amlogic,fifo-depth = <256>; status = "disabled"; }; @@ -1191,6 +1193,7 @@ interrupts = <GIC_SPI 86 IRQ_TYPE_EDGE_RISING>; clocks = <&clkc_audio AUD_CLKID_TODDR_C>; resets = <&arb AXG_ARB_TODDR_C>; + amlogic,fifo-depth = <256>; status = "disabled"; }; @@ -1202,6 +1205,7 @@ interrupts = <GIC_SPI 88 IRQ_TYPE_EDGE_RISING>; clocks = <&clkc_audio AUD_CLKID_FRDDR_A>; resets = <&arb AXG_ARB_FRDDR_A>; + amlogic,fifo-depth = <512>; status = "disabled"; }; @@ -1213,6 +1217,7 @@ interrupts = <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>; clocks = <&clkc_audio AUD_CLKID_FRDDR_B>; resets = <&arb AXG_ARB_FRDDR_B>; + amlogic,fifo-depth = <256>; status = "disabled"; }; @@ -1224,6 +1229,7 @@ interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>; clocks = <&clkc_audio AUD_CLKID_FRDDR_C>; resets = <&arb AXG_ARB_FRDDR_C>; + amlogic,fifo-depth = <256>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi index 7fabc8d9654a..abe04f4ad7d8 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi @@ -1968,6 +1968,29 @@ }; }; + vdec: video-decoder@ff620000 { + compatible = "amlogic,g12a-vdec"; + reg = <0x0 0xff620000 0x0 0x10000>, + <0x0 0xffd0e180 0x0 0xe4>; + reg-names = "dos", "esparser"; + interrupts = <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "vdec", "esparser"; + + amlogic,ao-sysctrl = <&rti>; + amlogic,canvas = <&canvas>; + + clocks = <&clkc CLKID_PARSER>, + <&clkc CLKID_DOS>, + <&clkc CLKID_VDEC_1>, + <&clkc CLKID_VDEC_HEVC>, + <&clkc CLKID_VDEC_HEVCF>; + clock-names = "dos_parser", "dos", "vdec_1", + "vdec_hevc", "vdec_hevcf"; + resets = <&reset RESET_PARSER>; + reset-names = "esparser"; + }; + vpu: vpu@ff900000 { compatible = "amlogic,meson-g12a-vpu"; reg = <0x0 0xff900000 0x0 0x100000>, diff --git a/arch/arm64/boot/dts/amlogic/meson-g12.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12.dtsi index b3ba2fda8af8..03054c478896 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12.dtsi @@ -106,6 +106,7 @@ resets = <&arb AXG_ARB_TODDR_A>, <&clkc_audio AUD_RESET_TODDR_A>; reset-names = "arb", "rst"; + amlogic,fifo-depth = <512>; status = "disabled"; }; @@ -120,6 +121,7 @@ resets = <&arb AXG_ARB_TODDR_B>, <&clkc_audio AUD_RESET_TODDR_B>; reset-names = "arb", "rst"; + amlogic,fifo-depth = <256>; status = "disabled"; }; @@ -134,6 +136,7 @@ resets = <&arb AXG_ARB_TODDR_C>, <&clkc_audio AUD_RESET_TODDR_C>; reset-names = "arb", "rst"; + amlogic,fifo-depth = <256>; status = "disabled"; }; @@ -148,6 +151,7 @@ resets = <&arb AXG_ARB_FRDDR_A>, <&clkc_audio AUD_RESET_FRDDR_A>; reset-names = "arb", "rst"; + amlogic,fifo-depth = <512>; status = "disabled"; }; @@ -162,6 +166,7 @@ resets = <&arb AXG_ARB_FRDDR_B>, <&clkc_audio AUD_RESET_FRDDR_B>; reset-names = "arb", "rst"; + amlogic,fifo-depth = <256>; status = "disabled"; }; @@ -176,6 +181,7 @@ resets = <&arb AXG_ARB_FRDDR_C>, <&clkc_audio AUD_RESET_FRDDR_C>; reset-names = "arb", "rst"; + amlogic,fifo-depth = <256>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi new file mode 100644 index 000000000000..248b018c83d5 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi @@ -0,0 +1,375 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2019 BayLibre SAS. + * Author: Jerome Brunet <jbrunet@baylibre.com> + */ + +/* Libretech Amlogic GX PC form factor - AKA: Tartiflette */ + +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +/ { + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + + update-button { + label = "update"; + linux,code = <KEY_VENDOR>; + press-threshold-microvolt = <1300000>; + }; + }; + + aliases { + serial0 = &uart_AO; + ethernet0 = ðmac; + spi0 = &spifc; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + cvbs-connector { + compatible = "composite-video-connector"; + status = "disabled"; + + port { + cvbs_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + power-button { + label = "power"; + linux,code = <KEY_POWER>; + gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; + }; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + ao_5v: regulator-ao_5v { + compatible = "regulator-fixed"; + regulator-name = "AO_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_in>; + regulator-always-on; + }; + + dc_in: regulator-dc_in { + compatible = "regulator-fixed"; + regulator-name = "DC_IN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + leds { + compatible = "gpio-leds"; + + green { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_DISK_ACTIVITY; + gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "disk-activity"; + }; + + blue { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_STATUS; + gpios = <&gpio GPIODV_28 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + panic-indicator; + }; + }; + + vcc_card: regulator-vcc_card { + compatible = "regulator-fixed"; + regulator-name = "VCC_CARD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddio_ao3v3>; + + gpio = <&gpio GPIODV_4 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vcc5v: regulator-vcc5v { + compatible = "regulator-fixed"; + regulator-name = "VCC5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&ao_5v>; + + gpio = <&gpio GPIOH_3 GPIO_OPEN_DRAIN>; + }; + + vddio_ao18: regulator-vddio_ao18 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&ao_5v>; + regulator-always-on; + }; + + vddio_ao3v3: regulator-vddio_ao3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&ao_5v>; + regulator-always-on; + }; + + vddio_boot: regulator-vddio_boot { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_BOOT"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddio_ao3v3>; + regulator-always-on; + }; + + vddio_card: regulator-vddio-card { + compatible = "regulator-gpio"; + regulator-name = "VDDIO_CARD"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio GPIODV_5 GPIO_ACTIVE_HIGH>; + gpios-states = <0>; + + states = <3300000 0>, + <1800000 1>; + + regulator-settling-time-up-us = <200>; + regulator-settling-time-down-us = <50000>; + }; +}; + +&cec_AO { + pinctrl-0 = <&ao_cec_pins>; + pinctrl-names = "default"; + hdmi-phandle = <&hdmi_tx>; + status = "okay"; +}; + +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; +}; + +ðmac { + pinctrl-0 = <ð_pins>, <ð_phy_irq_pins>; + pinctrl-names = "default"; + phy-handle = <&external_phy>; + amlogic,tx-delay-ns = <2>; + phy-mode = "rgmii"; + status = "okay"; +}; + +&external_mdio { + external_phy: ethernet-phy@0 { + reg = <0>; + max-speed = <1000>; + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio_intc>; + interrupts = <25 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&pinctrl_periphs { + /* + * Make sure the reset pin of the usb HUB is driven high to take + * it out of reset. + */ + usb1_rst_pins: usb1_rst_irq { + mux { + groups = "GPIODV_3"; + function = "gpio_periphs"; + bias-disable; + output-high; + }; + }; + + /* Make sure the phy irq pin is properly configured as input */ + eth_phy_irq_pins: eth_phy_irq { + mux { + groups = "GPIOZ_15"; + function = "gpio_periphs"; + bias-disable; + output-disable; + }; + }; +}; + +&hdmi_tx { + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; + pinctrl-names = "default"; + hdmi-supply = <&vcc5v>; + status = "okay"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +&ir { + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&i2c_C { + pinctrl-0 = <&i2c_c_dv18_pins>; + pinctrl-names = "default"; + status = "okay"; + + rtc: rtc@51 { + reg = <0x51>; + compatible = "nxp,pcf8563"; + #clock-cells = <0>; + clock-output-names = "rtc_clkout"; + }; +}; + +&pwm_AO_ab { + pinctrl-0 = <&pwm_ao_a_3_pins>; + pinctrl-names = "default"; + clocks = <&clkc CLKID_FCLK_DIV4>; + clock-names = "clkin0"; + status = "okay"; +}; + +&pwm_ab { + pinctrl-0 = <&pwm_b_pins>; + pinctrl-names = "default"; + clocks = <&clkc CLKID_FCLK_DIV4>; + clock-names = "clkin0"; + status = "okay"; +}; + +&pwm_ef { + pinctrl-0 = <&pwm_e_pins>, <&pwm_f_clk_pins>; + pinctrl-names = "default"; + clocks = <&clkc CLKID_FCLK_DIV4>; + clock-names = "clkin0"; + status = "okay"; +}; + +&saradc { + vref-supply = <&vddio_ao18>; + status = "okay"; +}; + +/* SD card */ +&sd_emmc_b { + pinctrl-0 = <&sdcard_pins>; + pinctrl-1 = <&sdcard_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-ddr50; + max-frequency = <200000000>; + disable-wp; + + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; + + vmmc-supply = <&vcc_card>; + vqmmc-supply = <&vddio_card>; + + status = "okay"; +}; + +/* eMMC */ +&sd_emmc_c { + pinctrl-0 = <&emmc_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + max-frequency = <200000000>; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vddio_ao3v3>; + vqmmc-supply = <&vddio_boot>; + + status = "okay"; +}; + +&spifc { + pinctrl-0 = <&nor_pins>; + pinctrl-names = "default"; + status = "okay"; + + gd25lq128: spi-flash@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + spi-max-frequency = <12000000>; + }; +}; + +&uart_AO { + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb2_phy0 { + pinctrl-0 = <&usb1_rst_pins>; + pinctrl-names = "default"; + phy-supply = <&vcc5v>; +}; + +&usb2_phy1 { + phy-supply = <&vcc5v>; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts new file mode 100644 index 000000000000..2f1f829450a2 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts @@ -0,0 +1,78 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Mohammad Rasim <mohammad.rasim96@gmail.com> + */ + +/dts-v1/; + +#include "meson-gxbb-p20x.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +/ { + compatible = "videostrong,kii-pro", "amlogic,p201", "amlogic,s905", "amlogic,meson-gxbb"; + model = "Videostrong KII Pro"; + + leds { + compatible = "gpio-leds"; + status { + gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>; + default-state = "off"; + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_STATUS; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + + button-reset { + label = "reset"; + linux,code = <KEY_POWER>; + gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>; + }; + }; + +}; + + + +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm4335a0"; + }; +}; + + + +ðmac { + status = "okay"; + pinctrl-0 = <ð_rmii_pins>; + pinctrl-names = "default"; + + phy-handle = <ð_phy0>; + phy-mode = "rmii"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + eth_phy0: ethernet-phy@0 { + /* IC Plus IP101GR (0x02430c54) */ + reg = <0>; + reset-assert-us = <10000>; + reset-deassert-us = <10000>; + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-libretech-pc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-libretech-pc.dts new file mode 100644 index 000000000000..100a1cfeea15 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-libretech-pc.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2019 BayLibre SAS. All rights reserved. + * Author: Jerome Brunet <jbrunet@baylibre.com> + */ + +/dts-v1/; + +#include "meson-gxl-s905d.dtsi" +#include "meson-gx-libretech-pc.dtsi" + +/ { + compatible = "libretech,aml-s905d-pc", "amlogic,s905d", + "amlogic,meson-gxl"; + model = "Libre Computer AML-S905D-PC"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi index ed33d8efaf62..259d86399390 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi @@ -533,6 +533,15 @@ }; }; + i2c_c_dv18_pins: i2c_c_dv18 { + mux { + groups = "i2c_sck_c_dv19", + "i2c_sda_c_dv18"; + function = "i2c_c"; + bias-disable; + }; + }; + eth_pins: eth_c { mux { groups = "eth_mdio", diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-s912-libretech-pc.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-s912-libretech-pc.dts new file mode 100644 index 000000000000..444c249863cb --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-s912-libretech-pc.dts @@ -0,0 +1,62 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2019 BayLibre SAS. All rights reserved. + * Author: Jerome Brunet <jbrunet@baylibre.com> + */ + +/dts-v1/; + +#include "meson-gxm.dtsi" +#include "meson-gx-libretech-pc.dtsi" + +/ { + compatible = "libretech,aml-s912-pc", "amlogic,s912", + "amlogic,meson-gxm"; + model = "Libre Computer AML-S912-PC"; + + typec2_vbus: regulator-typec2_vbus { + compatible = "regulator-fixed"; + regulator-name = "TYPEC2_VBUS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v>; + + gpio = <&gpio GPIODV_1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&pinctrl_periphs { + /* + * Make sure the irq pin of the TYPE C controller is not driven + * by the SoC. + */ + fusb302_irq_pins: fusb302_irq { + mux { + groups = "GPIODV_0"; + function = "gpio_periphs"; + bias-pull-up; + output-disable; + }; + }; +}; + +&i2c_C { + fusb302@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + + pinctrl-0 = <&fusb302_irq_pins>; + pinctrl-names = "default"; + interrupt-parent = <&gpio_intc>; + interrupts = <59 IRQ_TYPE_LEVEL_LOW>; + + vbus-supply = <&typec2_vbus>; + + status = "okay"; + }; +}; + +&usb2_phy2 { + phy-supply = <&typec2_vbus>; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts index 5bd07469766b..a8bb3fa9fec9 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts @@ -46,25 +46,47 @@ }; gpio-keys { - compatible = "gpio-keys-polled"; - poll-interval = <100>; + compatible = "gpio-keys"; key1 { label = "A"; linux,code = <BTN_0>; gpios = <&gpio GPIOH_6 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio_intc>; + interrupts = <34 IRQ_TYPE_EDGE_BOTH>; }; key2 { label = "B"; linux,code = <BTN_1>; gpios = <&gpio GPIOH_7 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio_intc>; + interrupts = <35 IRQ_TYPE_EDGE_BOTH>; }; key3 { label = "C"; linux,code = <BTN_2>; gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio_intc>; + interrupts = <2 IRQ_TYPE_EDGE_BOTH>; + }; + + mic_mute { + label = "MicMute"; + linux,code = <SW_MUTE_DEVICE>; + linux,input-type = <EV_SW>; + gpios = <&gpio_ao GPIOE_2 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio_intc>; + interrupts = <99 IRQ_TYPE_EDGE_BOTH>; + }; + + power_key { + label = "PowerKey"; + linux,code = <KEY_POWER>; + gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio_intc>; + interrupts = <3 IRQ_TYPE_EDGE_BOTH>; }; }; @@ -569,6 +591,8 @@ bluetooth { compatible = "brcm,bcm43438-bt"; + interrupt-parent = <&gpio_intc>; + interrupts = <95 IRQ_TYPE_LEVEL_HIGH>; shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; max-speed = <2000000>; clocks = <&wifi32k>; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi index 7894a5458dbc..d847a3fcbc85 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi @@ -201,6 +201,7 @@ resets = <&arb AXG_ARB_TODDR_A>, <&clkc_audio AUD_RESET_TODDR_A>; reset-names = "arb", "rst"; + amlogic,fifo-depth = <8192>; status = "disabled"; }; @@ -215,6 +216,7 @@ resets = <&arb AXG_ARB_TODDR_B>, <&clkc_audio AUD_RESET_TODDR_B>; reset-names = "arb", "rst"; + amlogic,fifo-depth = <256>; status = "disabled"; }; @@ -229,6 +231,7 @@ resets = <&arb AXG_ARB_TODDR_C>, <&clkc_audio AUD_RESET_TODDR_C>; reset-names = "arb", "rst"; + amlogic,fifo-depth = <256>; status = "disabled"; }; @@ -243,6 +246,7 @@ resets = <&arb AXG_ARB_FRDDR_A>, <&clkc_audio AUD_RESET_FRDDR_A>; reset-names = "arb", "rst"; + amlogic,fifo-depth = <512>; status = "disabled"; }; @@ -257,6 +261,7 @@ resets = <&arb AXG_ARB_FRDDR_B>, <&clkc_audio AUD_RESET_FRDDR_B>; reset-names = "arb", "rst"; + amlogic,fifo-depth = <256>; status = "disabled"; }; @@ -271,6 +276,7 @@ resets = <&arb AXG_ARB_FRDDR_C>, <&clkc_audio AUD_RESET_FRDDR_C>; reset-names = "arb", "rst"; + amlogic,fifo-depth = <256>; status = "disabled"; }; @@ -412,6 +418,7 @@ resets = <&arb AXG_ARB_TODDR_D>, <&clkc_audio AUD_RESET_TODDR_D>; reset-names = "arb", "rst"; + amlogic,fifo-depth = <256>; status = "disabled"; }; @@ -426,6 +433,7 @@ resets = <&arb AXG_ARB_FRDDR_D>, <&clkc_audio AUD_RESET_FRDDR_D>; reset-names = "arb", "rst"; + amlogic,fifo-depth = <256>; status = "disabled"; }; }; @@ -482,6 +490,10 @@ power-domains = <&pwrc PWRC_SM1_VPU_ID>; }; +&vdec { + compatible = "amlogic,sm1-vdec"; +}; + &vpu { power-domains = <&pwrc PWRC_SM1_VPU_ID>; }; diff --git a/arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts b/arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts index 3e8c70778e24..7a2c7f9c2660 100644 --- a/arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts +++ b/arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts @@ -49,12 +49,6 @@ reg = <0x1 0x00000000 0x0 0x40000000>; // 1GB }; - uart_clk: uart-clk { - compatible = "fixed-clock"; - clock-frequency = <500000000>; - #clock-cells = <0>; - }; - soc { gpio0: gpio@50027000 { porta: gpio-controller@0 { @@ -173,21 +167,18 @@ &uart0 { status = "okay"; - clocks = <&uart_clk>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0_default>; }; &uart1 { status = "okay"; - clocks = <&uart_clk>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1_default>; }; &uart2 { status = "okay"; - clocks = <&uart_clk>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2_default>; }; diff --git a/arch/arm64/boot/dts/bitmain/bm1880.dtsi b/arch/arm64/boot/dts/bitmain/bm1880.dtsi index d65453f99a99..fa6e6905f588 100644 --- a/arch/arm64/boot/dts/bitmain/bm1880.dtsi +++ b/arch/arm64/boot/dts/bitmain/bm1880.dtsi @@ -4,6 +4,7 @@ * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> */ +#include <dt-bindings/clock/bm1880-clock.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/reset/bitmain,bm1880-reset.h> @@ -66,6 +67,12 @@ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; }; + osc: osc { + compatible = "fixed-clock"; + clock-frequency = <25000000>; + #clock-cells = <0>; + }; + soc { compatible = "simple-bus"; #address-cells = <2>; @@ -94,6 +101,15 @@ reg = <0x400 0x120>; }; + clk: clock-controller@e8 { + compatible = "bitmain,bm1880-clk"; + reg = <0xe8 0x0c>, <0x800 0xb0>; + reg-names = "pll", "sys"; + clocks = <&osc>; + clock-names = "osc"; + #clock-cells = <1>; + }; + rst: reset-controller@c00 { compatible = "bitmain,bm1880-reset"; reg = <0xc00 0x8>; @@ -158,6 +174,9 @@ uart0: serial@58018000 { compatible = "snps,dw-apb-uart"; reg = <0x0 0x58018000 0x0 0x2000>; + clocks = <&clk BM1880_CLK_UART_500M>, + <&clk BM1880_CLK_APB_UART>; + clock-names = "baudclk", "apb_pclk"; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; @@ -168,6 +187,9 @@ uart1: serial@5801A000 { compatible = "snps,dw-apb-uart"; reg = <0x0 0x5801a000 0x0 0x2000>; + clocks = <&clk BM1880_CLK_UART_500M>, + <&clk BM1880_CLK_APB_UART>; + clock-names = "baudclk", "apb_pclk"; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; @@ -178,6 +200,9 @@ uart2: serial@5801C000 { compatible = "snps,dw-apb-uart"; reg = <0x0 0x5801c000 0x0 0x2000>; + clocks = <&clk BM1880_CLK_UART_500M>, + <&clk BM1880_CLK_APB_UART>; + clock-names = "baudclk", "apb_pclk"; interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; @@ -188,6 +213,9 @@ uart3: serial@5801E000 { compatible = "snps,dw-apb-uart"; reg = <0x0 0x5801e000 0x0 0x2000>; + clocks = <&clk BM1880_CLK_UART_500M>, + <&clk BM1880_CLK_APB_UART>; + clock-names = "baudclk", "apb_pclk"; interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi index 6f90b0e62cba..250fc01de78d 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * SAMSUNG Exynos5433 TM2 board device tree source + * Samsung Exynos5433 TM2 board device tree source * * Copyright (c) 2016 Samsung Electronics Co., Ltd. * diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts index dda5d2746a74..fdd0796b29d4 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * SAMSUNG Exynos5433 TM2 board device tree source + * Samsung Exynos5433 TM2 board device tree source * * Copyright (c) 2016 Samsung Electronics Co., Ltd. * diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts index 1e207ce8b97b..089fc7a1af67 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * SAMSUNG Exynos5433 TM2E board device tree source + * Samsung Exynos5433 TM2E board device tree source * * Copyright (c) 2016 Samsung Electronics Co., Ltd. * diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts index 080e0f56e108..7af288fa9475 100644 --- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts +++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * SAMSUNG Exynos7 Espresso board device tree source + * Samsung Exynos7 Espresso board device tree source * * Copyright (c) 2014 Samsung Electronics Co., Ltd. * http://www.samsung.com @@ -13,7 +13,7 @@ #include <dt-bindings/gpio/gpio.h> / { - model = "Samsung Exynos7 Espresso board based on EXYNOS7"; + model = "Samsung Exynos7 Espresso board based on Exynos7"; compatible = "samsung,exynos7-espresso", "samsung,exynos7"; aliases { diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi index 3a00ef0a17ff..5558045637ac 100644 --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * SAMSUNG EXYNOS7 SoC device tree source + * Samsung Exynos7 SoC device tree source * * Copyright (c) 2014 Samsung Electronics Co., Ltd. * http://www.samsung.com diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 38e344a2f0ff..bac293e6ee33 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -18,6 +18,8 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-clearfog-cx.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-honeycomb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb @@ -28,7 +30,9 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-hummingboard-pulse.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-devkit.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-nitrogen.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mq-phanbell.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-pico-pi.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mq-thor96.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-rmb3.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-zest.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qxp-ai_ml.dtb diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts index 5b9d4b35dd35..ca409d907b36 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts @@ -123,6 +123,21 @@ status = "okay"; }; +&fspi { + status = "okay"; + + mt35xu02g0: flash@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + /* The following setting enables 1-1-8 (CMD-ADDR-DATA) mode */ + spi-rx-bus-width = <8>; /* 8 SPI Rx lines */ + spi-tx-bus-width = <1>; /* 1 SPI Tx line */ + reg = <0>; + }; +}; + &i2c0 { status = "okay"; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts index 9720a190049f..afb55653850d 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts @@ -93,9 +93,26 @@ &esdhc1 { mmc-hs200-1_8v; + mmc-hs400-1_8v; + bus-width = <8>; status = "okay"; }; +&fspi { + status = "okay"; + + mt35xu02g0: flash@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + /* The following setting enables 1-1-8 (CMD-ADDR-DATA) mode */ + spi-rx-bus-width = <8>; /* 8 SPI Rx lines */ + spi-tx-bus-width = <1>; /* 1 SPI Tx line */ + reg = <0>; + }; +}; + &i2c0 { status = "okay"; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index 8e8a77eb596a..0bf375ec959b 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -88,7 +88,7 @@ reboot { compatible ="syscon-reboot"; - regmap = <&dcfg>; + regmap = <&rst>; offset = <0xb0>; mask = <0x02>; }; @@ -175,7 +175,13 @@ dcfg: syscon@1e00000 { compatible = "fsl,ls1028a-dcfg", "syscon"; reg = <0x0 0x1e00000 0x0 0x10000>; - big-endian; + little-endian; + }; + + rst: syscon@1e60000 { + compatible = "syscon"; + reg = <0x0 0x1e60000 0x0 0x10000>; + little-endian; }; scfg: syscon@1fc0000 { @@ -271,6 +277,19 @@ status = "disabled"; }; + fspi: spi@20c0000 { + compatible = "nxp,lx2160a-fspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x20c0000 0x0 0x10000>, + <0x0 0x20000000 0x0 0x10000000>; + reg-names = "fspi_base", "fspi_mmap"; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "fspi_en", "fspi"; + status = "disabled"; + }; + esdhc: mmc@2140000 { compatible = "fsl,ls1028a-esdhc", "fsl,esdhc"; reg = <0x0 0x2140000 0x0 0x10000>; @@ -316,7 +335,7 @@ edma0: dma-controller@22c0000 { #dma-cells = <2>; - compatible = "fsl,vf610-edma"; + compatible = "fsl,ls1028a-edma"; reg = <0x0 0x22c0000 0x0 0x10000>, <0x0 0x22d0000 0x0 0x10000>, <0x0 0x22e0000 0x0 0x10000>; @@ -528,6 +547,7 @@ dma-names = "tx", "rx"; dmas = <&edma0 1 4>, <&edma0 1 3>; + fsl,sai-asynchronous; status = "disabled"; }; @@ -542,6 +562,22 @@ dma-names = "tx", "rx"; dmas = <&edma0 1 6>, <&edma0 1 5>; + fsl,sai-asynchronous; + status = "disabled"; + }; + + sai3: audio-controller@f120000 { + #sound-dai-cells = <0>; + compatible = "fsl,vf610-sai"; + reg = <0x0 0xf120000 0x0 0x10000>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>, <&clockgen 4 1>, + <&clockgen 4 1>, <&clockgen 4 1>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dma-names = "tx", "rx"; + dmas = <&edma0 1 8>, + <&edma0 1 7>; + fsl,sai-asynchronous; status = "disabled"; }; @@ -556,6 +592,37 @@ dma-names = "tx", "rx"; dmas = <&edma0 1 10>, <&edma0 1 9>; + fsl,sai-asynchronous; + status = "disabled"; + }; + + sai5: audio-controller@f140000 { + #sound-dai-cells = <0>; + compatible = "fsl,vf610-sai"; + reg = <0x0 0xf140000 0x0 0x10000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>, <&clockgen 4 1>, + <&clockgen 4 1>, <&clockgen 4 1>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dma-names = "tx", "rx"; + dmas = <&edma0 1 12>, + <&edma0 1 11>; + fsl,sai-asynchronous; + status = "disabled"; + }; + + sai6: audio-controller@f150000 { + #sound-dai-cells = <0>; + compatible = "fsl,vf610-sai"; + reg = <0x0 0xf150000 0x0 0x10000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>, <&clockgen 4 1>, + <&clockgen 4 1>, <&clockgen 4 1>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dma-names = "tx", "rx"; + dmas = <&edma0 1 14>, + <&edma0 1 13>; + fsl,sai-asynchronous; status = "disabled"; }; @@ -584,7 +651,7 @@ 0x00010004 0x0000003d 0x00010005 0x00000045 0x00010006 0x0000004d - 0x00010007 0x00000045 + 0x00010007 0x00000055 0x00010008 0x0000005e 0x00010009 0x00000066 0x0001000a 0x0000006e diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts index 3595be0f2527..db3d303093f6 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts @@ -112,6 +112,20 @@ }; +&qspi { + status = "okay"; + + mt25qu512a0: flash@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <1>; + reg = <0>; + }; +}; + #include "fsl-ls1046-post.dtsi" &fman0 { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts index 0c742befb761..dbc23d6cd3b4 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts @@ -101,23 +101,23 @@ &qspi { status = "okay"; - qflash0: flash@0 { - compatible = "spansion,m25p80"; + s25fs512s0: flash@0 { + compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; - spi-max-frequency = <20000000>; + spi-max-frequency = <50000000>; spi-rx-bus-width = <4>; - spi-tx-bus-width = <4>; + spi-tx-bus-width = <1>; reg = <0>; }; - qflash1: flash@1 { - compatible = "spansion,m25p80"; + s25fs512s1: flash@1 { + compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; - spi-max-frequency = <20000000>; + spi-max-frequency = <50000000>; spi-rx-bus-width = <4>; - spi-tx-bus-width = <4>; + spi-tx-bus-width = <1>; reg = <1>; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts index 120e62dad154..41d8b15f25a5 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts @@ -143,6 +143,30 @@ status = "okay"; }; +&qspi { + status = "okay"; + + s25fs512s0: flash@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <1>; + reg = <0>; + }; + + s25fs512s1: flash@1 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <1>; + reg = <1>; + }; +}; + &sata { status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts index 90b198939251..4d77b345cebd 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts @@ -86,6 +86,30 @@ status = "okay"; }; +&qspi { + status = "okay"; + + s25fs512s0: flash@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <1>; + reg = <0>; + }; + + s25fs512s1: flash@1 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <1>; + reg = <1>; + }; +}; + &sata { status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi index c676d0771762..594566265e3d 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi @@ -375,6 +375,19 @@ status = "disabled"; }; + qspi: spi@20c0000 { + compatible = "fsl,ls2080a-qspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x20c0000 0x0 0x10000>, + <0x0 0x20000000 0x0 0x10000000>; + reg-names = "QuadSPI", "QuadSPI-memory"; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "qspi_en", "qspi"; + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + status = "disabled"; + }; + esdhc: esdhc@2140000 { compatible = "fsl,ls1088a-esdhc", "fsl,esdhc"; reg = <0x0 0x2140000 0x0 0x10000>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi index 6fd7f63085c9..d0d670227ae2 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi @@ -108,7 +108,15 @@ }; &qspi { - status = "disabled"; + status = "okay"; + + s25fs512s0: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + reg = <0>; + }; }; &sata0 { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi index 7a0be8eaa84a..f96d06da96be 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi @@ -618,16 +618,16 @@ }; qspi: spi@20c0000 { - status = "disabled"; - compatible = "fsl,ls2080a-qspi", "fsl,ls1021a-qspi"; + compatible = "fsl,ls2080a-qspi"; #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x20c0000 0x0 0x10000>, <0x0 0x20000000 0x0 0x10000000>; reg-names = "QuadSPI", "QuadSPI-memory"; - interrupts = <0 25 0x4>; /* Level high type */ + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen 4 3>, <&clockgen 4 3>; clock-names = "qspi_en", "qspi"; + status = "disabled"; }; pcie1: pcie@3400000 { diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi new file mode 100644 index 000000000000..071e21678f77 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi @@ -0,0 +1,127 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Device Tree file for LX2160A-CEx7 +// +// Copyright 2019 SolidRun Ltd. + +/dts-v1/; + +#include "fsl-lx2160a.dtsi" + +/ { + model = "SolidRun LX2160A COM Express Type 7 module"; + compatible = "solidrun,lx2160a-cex7", "fsl,lx2160a"; + + aliases { + crypto = &crypto; + }; + + sb_3v3: regulator-sb3v3 { + compatible = "regulator-fixed"; + regulator-name = "RT7290"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&crypto { + status = "okay"; +}; + +&dpmac17 { + phy-handle = <&rgmii_phy1>; + phy-connection-type = "rgmii-id"; +}; + +&emdio1 { + status = "okay"; + + rgmii_phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&esdhc1 { + mmc-hs200-1_8v; + mmc-hs400-1_8v; + bus-width = <8>; + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + i2c-switch@77 { + compatible = "nxp,pca9547"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x77>; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + fan-temperature-ctrlr@18 { + compatible = "ti,amc6821"; + reg = <0x18>; + cooling-min-state = <0>; + cooling-max-state = <9>; + #cooling-cells = <2>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + temperature-sensor@48 { + compatible = "nxp,sa56004"; + reg = <0x48>; + vcc-supply = <&sb_3v3>; + }; + }; + }; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; + + rtc@51 { + compatible = "nxp,pcf2129"; + reg = <0x51>; + // IRQ10_B + interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + +&fspi { + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,m25p80"; + m25p,fast-read; + spi-max-frequency = <50000000>; + reg = <0>; + /* The following setting enables 1-1-8 (CMD-ADDR-DATA) mode */ + spi-rx-bus-width = <8>; + spi-tx-bus-width = <1>; + }; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-cx.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-cx.dts new file mode 100644 index 000000000000..86a9b771428d --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-cx.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Device Tree file for LX2160A Clearfog CX board +// +// Copyright 2019 SolidRun Ltd. + +/dts-v1/; + +#include "fsl-lx2160a-clearfog-itx.dtsi" + +/ { + model = "SolidRun LX2160A Clearfog CX"; + compatible = "solidrun,clearfog-cx", + "solidrun,lx2160a-cex7", "fsl,lx2160a"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi new file mode 100644 index 000000000000..f3741a32e868 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi @@ -0,0 +1,57 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Device Tree file for LX2160A Clearfog ITX board; this contains the +// common parts shared between the Clearfog CX and Honeycomb builds. +// +// Copyright 2019 SolidRun Ltd. + +/dts-v1/; + +#include "fsl-lx2160a-cex7.dtsi" + +/ { + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&emdio2 { + status = "okay"; +}; + +&esdhc0 { + sd-uhs-sdr104; + sd-uhs-sdr50; + sd-uhs-sdr25; + sd-uhs-sdr12; + status = "okay"; +}; + +&sata0 { + status = "okay"; +}; + +&sata1 { + status = "okay"; +}; + +&sata2 { + status = "okay"; +}; + +&sata3 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-honeycomb.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-honeycomb.dts new file mode 100644 index 000000000000..fe19f3009ea5 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-honeycomb.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Device Tree file for LX2160A Honeycomb board +// +// Copyright 2019 SolidRun Ltd. + +/dts-v1/; + +#include "fsl-lx2160a-clearfog-itx.dtsi" + +/ { + model = "SolidRun LX2160A Honeycomb"; + compatible = "solidrun,honeycomb", + "solidrun,lx2160a-cex7", "fsl,lx2160a"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts index c2817b784232..51615de102fe 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts @@ -35,6 +35,34 @@ status = "okay"; }; +&dpmac17 { + phy-handle = <&rgmii_phy1>; + phy-connection-type = "rgmii-id"; +}; + +&dpmac18 { + phy-handle = <&rgmii_phy2>; + phy-connection-type = "rgmii-id"; +}; + +&emdio1 { + status = "okay"; + + rgmii_phy1: ethernet-phy@1 { + /* AR8035 PHY */ + compatible = "ethernet-phy-id004d.d072"; + reg = <0x1>; + eee-broken-1000t; + }; + + rgmii_phy2: ethernet-phy@2 { + /* AR8035 PHY */ + compatible = "ethernet-phy-id004d.d072"; + reg = <0x2>; + eee-broken-1000t; + }; +}; + &esdhc0 { sd-uhs-sdr104; sd-uhs-sdr50; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi index e883fe0fc1b7..e5ee5591e52b 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi @@ -939,6 +939,27 @@ fsl,extts-fifo; }; + /* WRIOP0: 0x8b8_0000, E-MDIO1: 0x1_6000 */ + emdio1: mdio@8b96000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8b96000 0x0 0x1000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + little-endian; + status = "disabled"; + }; + + emdio2: mdio@8b97000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8b97000 0x0 0x1000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + fsl_mc: fsl-mc@80c000000 { compatible = "fsl,qoriq-mc"; reg = <0x00000008 0x0c000000 0 0x40>, diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts index 28ab17a277bb..9e54747cf4e6 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts @@ -16,6 +16,11 @@ stdout-path = &uart2; }; + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0 0x80000000>; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -77,6 +82,26 @@ cpu-supply = <&buck2_reg>; }; +&ddrc { + operating-points-v2 = <&ddrc_opp_table>; + + ddrc_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-25M { + opp-hz = /bits/ 64 <25000000>; + }; + + opp-100M { + opp-hz = /bits/ 64 <100000000>; + }; + + opp-750M { + opp-hz = /bits/ 64 <750000000>; + }; + }; +}; + &fec1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec1>; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h b/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h index cffa8991880d..5ccc4cc91959 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h +++ b/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h @@ -430,18 +430,26 @@ #define MX8MM_IOMUXC_SAI1_MCLK_SIM_M_HRESP 0x1AC 0x414 0x000 0x7 0x0 #define MX8MM_IOMUXC_SAI2_RXFS_SAI2_RX_SYNC 0x1B0 0x418 0x000 0x0 0x0 #define MX8MM_IOMUXC_SAI2_RXFS_SAI5_TX_SYNC 0x1B0 0x418 0x4EC 0x1 0x2 +#define MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX 0x1B0 0x418 0x000 0x4 0x0 +#define MX8MM_IOMUXC_SAI2_RXFS_UART1_DTE_RX 0x1B0 0x418 0x4F4 0x4 0x2 #define MX8MM_IOMUXC_SAI2_RXFS_GPIO4_IO21 0x1B0 0x418 0x000 0x5 0x0 #define MX8MM_IOMUXC_SAI2_RXFS_SIM_M_HSIZE0 0x1B0 0x418 0x000 0x7 0x0 #define MX8MM_IOMUXC_SAI2_RXC_SAI2_RX_BCLK 0x1B4 0x41C 0x000 0x0 0x0 #define MX8MM_IOMUXC_SAI2_RXC_SAI5_TX_BCLK 0x1B4 0x41C 0x4E8 0x1 0x2 +#define MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX 0x1B4 0x41C 0x4F4 0x4 0x3 +#define MX8MM_IOMUXC_SAI2_RXC_UART1_DTE_TX 0x1B4 0x41C 0x000 0x4 0x0 #define MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22 0x1B4 0x41C 0x000 0x5 0x0 #define MX8MM_IOMUXC_SAI2_RXC_SIM_M_HSIZE1 0x1B4 0x41C 0x000 0x7 0x0 #define MX8MM_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0 0x1B8 0x420 0x000 0x0 0x0 #define MX8MM_IOMUXC_SAI2_RXD0_SAI5_TX_DATA0 0x1B8 0x420 0x000 0x1 0x0 +#define MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B 0x1B8 0x420 0x4F0 0x4 0x2 +#define MX8MM_IOMUXC_SAI2_RXD0_UART1_DTE_CTS_B 0x1B8 0x420 0x000 0x4 0x0 #define MX8MM_IOMUXC_SAI2_RXD0_GPIO4_IO23 0x1B8 0x420 0x000 0x5 0x0 #define MX8MM_IOMUXC_SAI2_RXD0_SIM_M_HSIZE2 0x1B8 0x420 0x000 0x7 0x0 #define MX8MM_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0x1BC 0x424 0x000 0x0 0x0 #define MX8MM_IOMUXC_SAI2_TXFS_SAI5_TX_DATA1 0x1BC 0x424 0x000 0x1 0x0 +#define MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B 0x1BC 0x424 0x000 0x4 0x0 +#define MX8MM_IOMUXC_SAI2_TXFS_UART1_DTE_RTS_B 0x1BC 0x424 0x4F0 0x4 0x3 #define MX8MM_IOMUXC_SAI2_TXFS_GPIO4_IO24 0x1BC 0x424 0x000 0x5 0x0 #define MX8MM_IOMUXC_SAI2_TXFS_SIM_M_HWRITE 0x1BC 0x424 0x000 0x7 0x0 #define MX8MM_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0x1C0 0x428 0x000 0x0 0x0 @@ -464,21 +472,29 @@ #define MX8MM_IOMUXC_SAI3_RXC_SAI3_RX_BCLK 0x1D0 0x438 0x000 0x0 0x0 #define MX8MM_IOMUXC_SAI3_RXC_GPT1_CLK 0x1D0 0x438 0x000 0x1 0x0 #define MX8MM_IOMUXC_SAI3_RXC_SAI5_RX_BCLK 0x1D0 0x438 0x4D0 0x2 0x2 +#define MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B 0x1D0 0x438 0x000 0x4 0x0 +#define MX8MM_IOMUXC_SAI3_RXC_UART2_DTE_RTS_B 0x1D0 0x438 0x4F8 0x4 0x2 #define MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29 0x1D0 0x438 0x000 0x5 0x0 #define MX8MM_IOMUXC_SAI3_RXC_TPSMP_HTRANS1 0x1D0 0x438 0x000 0x7 0x0 #define MX8MM_IOMUXC_SAI3_RXD_SAI3_RX_DATA0 0x1D4 0x43C 0x000 0x0 0x0 #define MX8MM_IOMUXC_SAI3_RXD_GPT1_COMPARE1 0x1D4 0x43C 0x000 0x1 0x0 #define MX8MM_IOMUXC_SAI3_RXD_SAI5_RX_DATA0 0x1D4 0x43C 0x4D4 0x2 0x2 +#define MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B 0x1D4 0x43C 0x4F8 0x4 0x3 +#define MX8MM_IOMUXC_SAI3_RXD_UART2_DTE_CTS_B 0x1D4 0x43C 0x000 0x4 0x0 #define MX8MM_IOMUXC_SAI3_RXD_GPIO4_IO30 0x1D4 0x43C 0x000 0x5 0x0 #define MX8MM_IOMUXC_SAI3_RXD_TPSMP_HDATA0 0x1D4 0x43C 0x000 0x7 0x0 #define MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0x1D8 0x440 0x000 0x0 0x0 #define MX8MM_IOMUXC_SAI3_TXFS_GPT1_CAPTURE2 0x1D8 0x440 0x000 0x1 0x0 #define MX8MM_IOMUXC_SAI3_TXFS_SAI5_RX_DATA1 0x1D8 0x440 0x4D8 0x2 0x2 +#define MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX 0x1D8 0x440 0x4Fc 0x4 0x2 +#define MX8MM_IOMUXC_SAI3_TXFS_UART2_DTE_TX 0x1D8 0x440 0x000 0x4 0x0 #define MX8MM_IOMUXC_SAI3_TXFS_GPIO4_IO31 0x1D8 0x440 0x000 0x5 0x0 #define MX8MM_IOMUXC_SAI3_TXFS_TPSMP_HDATA1 0x1D8 0x440 0x000 0x7 0x0 #define MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0x1DC 0x444 0x000 0x0 0x0 #define MX8MM_IOMUXC_SAI3_TXC_GPT1_COMPARE2 0x1DC 0x444 0x000 0x1 0x0 #define MX8MM_IOMUXC_SAI3_TXC_SAI5_RX_DATA2 0x1DC 0x444 0x4DC 0x2 0x2 +#define MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX 0x1DC 0x444 0x000 0x4 0x0 +#define MX8MM_IOMUXC_SAI3_TXC_UART2_DTE_RX 0x1DC 0x444 0x4Fc 0x4 0x3 #define MX8MM_IOMUXC_SAI3_TXC_GPIO5_IO0 0x1DC 0x444 0x000 0x5 0x0 #define MX8MM_IOMUXC_SAI3_TXC_TPSMP_HDATA2 0x1DC 0x444 0x000 0x7 0x0 #define MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0x1E0 0x448 0x000 0x0 0x0 diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi index 6edbdfe2d0d7..1e5e11592f7b 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi @@ -140,11 +140,6 @@ }; }; - memory@40000000 { - device_type = "memory"; - reg = <0x0 0x40000000 0 0x80000000>; - }; - osc_32k: clock-osc-32k { compatible = "fixed-clock"; #clock-cells = <0>; @@ -232,7 +227,7 @@ ranges = <0x0 0x0 0x0 0x3e000000>; aips1: bus@30000000 { - compatible = "fsl,aips-bus", "simple-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x30000000 0x30000000 0x400000>; @@ -438,7 +433,7 @@ }; anatop: anatop@30360000 { - compatible = "fsl,imx8mm-anatop", "syscon", "simple-bus"; + compatible = "fsl,imx8mm-anatop", "syscon"; reg = <0x30360000 0x10000>; }; @@ -501,7 +496,7 @@ }; aips2: bus@30400000 { - compatible = "fsl,aips-bus", "simple-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x30400000 0x30400000 0x400000>; @@ -560,7 +555,7 @@ }; aips3: bus@30800000 { - compatible = "fsl,aips-bus", "simple-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x30800000 0x30800000 0x400000>; @@ -641,6 +636,36 @@ status = "disabled"; }; + crypto: crypto@30900000 { + compatible = "fsl,sec-v4.0"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x30900000 0x40000>; + ranges = <0 0x30900000 0x40000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_AHB>, + <&clk IMX8MM_CLK_IPG_ROOT>; + clock-names = "aclk", "ipg"; + + sec_jr0: jr@1000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x1000 0x1000>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr1: jr@2000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x2000 0x1000>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr2: jr@3000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x3000 0x1000>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + i2c1: i2c@30a20000 { compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c"; #address-cells = <1>; @@ -740,7 +765,7 @@ reg = <0x30bd0000 0x10000>; interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX8MM_CLK_SDMA1_ROOT>, - <&clk IMX8MM_CLK_SDMA1_ROOT>; + <&clk IMX8MM_CLK_AHB>; clock-names = "ipg", "ahb"; #dma-cells = <3>; fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; @@ -775,7 +800,7 @@ }; aips4: bus@32c00000 { - compatible = "fsl,aips-bus", "simple-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x32c00000 0x32c00000 0x400000>; @@ -858,6 +883,16 @@ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; }; + ddrc: memory-controller@3d400000 { + compatible = "fsl,imx8mm-ddrc", "fsl,imx8m-ddrc"; + reg = <0x3d400000 0x400000>; + clock-names = "core", "pll", "alt", "apb"; + clocks = <&clk IMX8MM_CLK_DRAM_CORE>, + <&clk IMX8MM_DRAM_PLL>, + <&clk IMX8MM_CLK_DRAM_ALT>, + <&clk IMX8MM_CLK_DRAM_APB>; + }; + ddr-pmu@3d800000 { compatible = "fsl,imx8mm-ddr-pmu", "fsl,imx8m-ddr-pmu"; reg = <0x3d800000 0x400000>; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts index 071949412caf..2497eebb5739 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts @@ -17,6 +17,26 @@ cpu-supply = <&buck2_reg>; }; +&ddrc { + operating-points-v2 = <&ddrc_opp_table>; + + ddrc_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-25M { + opp-hz = /bits/ 64 <25000000>; + }; + + opp-100M { + opp-hz = /bits/ 64 <100000000>; + }; + + opp-600M { + opp-hz = /bits/ 64 <600000000>; + }; + }; +}; + &i2c1 { pmic@4b { compatible = "rohm,bd71847"; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi index 2a74330aee8c..0d2ec4a2c7f2 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi @@ -3,6 +3,7 @@ * Copyright 2019 NXP */ +#include <dt-bindings/usb/pd.h> #include "imx8mn.dtsi" / { @@ -22,6 +23,11 @@ }; }; + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0 0x80000000>; + }; + reg_usdhc2_vmmc: regulator-usdhc2 { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -60,6 +66,42 @@ status = "okay"; }; +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + ptn5110: tcpc@50 { + compatible = "nxp,ptn5110"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_typec1>; + reg = <0x50>; + interrupt-parent = <&gpio2>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + status = "okay"; + + port { + typec1_dr_sw: endpoint { + remote-endpoint = <&usb1_drd_sw>; + }; + }; + + typec1_con: connector { + compatible = "usb-c-connector"; + label = "USB-C"; + power-role = "dual"; + data-role = "dual"; + try-power-role = "sink"; + source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>; + sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM) + PDO_VAR(5000, 20000, 3000)>; + op-sink-microwatt = <15000000>; + self-powered; + }; + }; +}; + &snvs_pwrkey { status = "okay"; }; @@ -70,6 +112,21 @@ status = "okay"; }; +&usbotg1 { + dr_mode = "otg"; + hnp-disable; + srp-disable; + adp-disable; + usb-role-switch; + status = "okay"; + + port { + usb1_drd_sw: endpoint { + remote-endpoint = <&typec1_dr_sw>; + }; + }; +}; + &usdhc2 { assigned-clocks = <&clk IMX8MN_CLK_USDHC2>; assigned-clock-rates = <200000000>; @@ -138,12 +195,25 @@ >; }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3 + MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3 + >; + }; + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc { fsl,pins = < MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 >; }; + pinctrl_typec1: typec1grp { + fsl,pins = < + MX8MN_IOMUXC_SD1_STROBE_GPIO2_IO11 0x159 + >; + }; + pinctrl_uart2: uart2grp { fsl,pins = < MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi index e91625063f8e..a44b5438e842 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi @@ -139,11 +139,6 @@ }; }; - memory@40000000 { - device_type = "memory"; - reg = <0x0 0x40000000 0 0x80000000>; - }; - osc_32k: clock-osc-32k { compatible = "fixed-clock"; #clock-cells = <0>; @@ -208,7 +203,7 @@ ranges = <0x0 0x0 0x0 0x3e000000>; aips1: bus@30000000 { - compatible = "fsl,aips-bus", "simple-bus"; + compatible = "simple-bus"; reg = <0x30000000 0x400000>; #address-cells = <1>; #size-cells = <1>; @@ -349,7 +344,7 @@ anatop: anatop@30360000 { compatible = "fsl,imx8mn-anatop", "fsl,imx8mm-anatop", - "syscon", "simple-bus"; + "syscon"; reg = <0x30360000 0x10000>; }; @@ -395,7 +390,7 @@ }; aips2: bus@30400000 { - compatible = "fsl,aips-bus", "simple-bus"; + compatible = "simple-bus"; reg = <0x30400000 0x400000>; #address-cells = <1>; #size-cells = <1>; @@ -455,7 +450,7 @@ }; aips3: bus@30800000 { - compatible = "fsl,aips-bus", "simple-bus"; + compatible = "simple-bus"; reg = <0x30800000 0x400000>; #address-cells = <1>; #size-cells = <1>; @@ -537,6 +532,36 @@ status = "disabled"; }; + crypto: crypto@30900000 { + compatible = "fsl,sec-v4.0"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x30900000 0x40000>; + ranges = <0 0x30900000 0x40000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_AHB>, + <&clk IMX8MN_CLK_IPG_ROOT>; + clock-names = "aclk", "ipg"; + + sec_jr0: jr0@1000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x1000 0x1000>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr1: jr1@2000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x2000 0x1000>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr2: jr2@3000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x3000 0x1000>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + i2c1: i2c@30a20000 { compatible = "fsl,imx8mn-i2c", "fsl,imx21-i2c"; #address-cells = <1>; @@ -671,7 +696,7 @@ }; aips4: bus@32c00000 { - compatible = "fsl,aips-bus", "simple-bus"; + compatible = "simple-bus"; reg = <0x32c00000 0x400000>; #address-cells = <1>; #size-cells = <1>; @@ -683,10 +708,8 @@ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX8MN_CLK_USB1_CTRL_ROOT>; clock-names = "usb1_ctrl_root_clk"; - assigned-clocks = <&clk IMX8MN_CLK_USB_BUS>, - <&clk IMX8MN_CLK_USB_CORE_REF>; - assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_500M>, - <&clk IMX8MN_SYS_PLL1_100M>; + assigned-clocks = <&clk IMX8MN_CLK_USB_BUS>; + assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_500M>; fsl,usbphy = <&usbphynop1>; fsl,usbmisc = <&usbmisc1 0>; status = "disabled"; @@ -759,6 +782,16 @@ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; }; + ddrc: memory-controller@3d400000 { + compatible = "fsl,imx8mn-ddrc", "fsl,imx8m-ddrc"; + reg = <0x3d400000 0x400000>; + clock-names = "core", "pll", "alt", "apb"; + clocks = <&clk IMX8MN_CLK_DRAM_CORE>, + <&clk IMX8MN_DRAM_PLL>, + <&clk IMX8MN_CLK_DRAM_ALT>, + <&clk IMX8MN_CLK_DRAM_APB>; + }; + ddr-pmu@3d800000 { compatible = "fsl,imx8mn-ddr-pmu", "fsl,imx8m-ddr-pmu"; reg = <0x3d800000 0x400000>; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts index c36685916683..94066d49d6ed 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts @@ -105,6 +105,33 @@ cpu-supply = <&buck2_reg>; }; +&ddrc { + operating-points-v2 = <&ddrc_opp_table>; + + ddrc_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-25M { + opp-hz = /bits/ 64 <25000000>; + }; + + opp-100M { + opp-hz = /bits/ 64 <100000000>; + }; + + /* + * On imx8mq B0 PLL can't be bypassed so low bus is 166M + */ + opp-166M { + opp-hz = /bits/ 64 <166935483>; + }; + + opp-800M { + opp-hz = /bits/ 64 <800000000>; + }; + }; +}; + &fec1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec1>; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-hummingboard-pulse.dts b/arch/arm64/boot/dts/freescale/imx8mq-hummingboard-pulse.dts index b8cb20c01a79..bfd91c1ed6a5 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-hummingboard-pulse.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-hummingboard-pulse.dts @@ -84,6 +84,12 @@ clock-frequency = <100000>; status = "okay"; + eeprom@57 { + compatible = "atmel,24c02"; + reg = <0x57>; + status = "okay"; + }; + rtc@69 { compatible = "abracon,ab1805"; reg = <0x69>; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts index 2a759dff9f87..764a4cb4e125 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts @@ -421,7 +421,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_imu>; interrupt-parent = <&gpio3>; - interrupts = <19 IRQ_TYPE_LEVEL_LOW>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; vdd-supply = <®_3v3_p>; vddio-supply = <®_3v3_p>; }; @@ -440,6 +440,13 @@ AVDD28-supply = <®_2v8_p>; VDDIO-supply = <®_1v8_p>; }; + + accel-gyro@6a { + compatible = "st,lsm9ds1-imu"; + reg = <0x6a>; + vdd-supply = <®_3v3_p>; + vddio-supply = <®_3v3_p>; + }; }; &iomuxc { diff --git a/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts b/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts new file mode 100644 index 000000000000..3f2a489a4ad8 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts @@ -0,0 +1,376 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2017-2019 NXP + */ + +/dts-v1/; + +#include "imx8mq.dtsi" + +/ { + model = "Google i.MX8MQ Phanbell"; + compatible = "google,imx8mq-phanbell", "fsl,imx8mq"; + + chosen { + stdout-path = &uart1; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x00000000 0x40000000 0 0x40000000>; + }; + + pmic_osc: clock-pmic { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "pmic_osc"; + }; + + reg_usdhc2_vmmc: regulator-usdhc2-vmmc { + compatible = "regulator-fixed"; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&A53_0 { + cpu-supply = <&buck2>; +}; + +&A53_1 { + cpu-supply = <&buck2>; +}; + +&A53_2 { + cpu-supply = <&buck2>; +}; + +&A53_3 { + cpu-supply = <&buck2>; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic: pmic@4b { + compatible = "rohm,bd71837"; + reg = <0x4b>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + #clock-cells = <0>; + clocks = <&pmic_osc>; + clock-output-names = "pmic_clk"; + interrupt-parent = <&gpio1>; + interrupts = <3 GPIO_ACTIVE_LOW>; + + regulators { + buck1: BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <900000>; + rohm,dvs-idle-voltage = <900000>; + rohm,dvs-suspend-voltage = <800000>; + }; + + buck2: BUCK2 { + regulator-name = "buck2"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + rohm,dvs-run-voltage = <1000000>; + rohm,dvs-idle-voltage = <900000>; + }; + + buck3: BUCK3 { + regulator-name = "buck3"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + rohm,dvs-run-voltage = <900000>; + }; + + buck4: BUCK4 { + regulator-name = "buck4"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + rohm,dvs-run-voltage = <900000>; + }; + + buck5: BUCK5 { + regulator-name = "buck5"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + regulator-always-on; + }; + + buck6: BUCK6 { + regulator-name = "buck6"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + buck7: BUCK7 { + regulator-name = "buck7"; + regulator-min-microvolt = <1605000>; + regulator-max-microvolt = <1995000>; + regulator-boot-on; + regulator-always-on; + }; + + buck8: BUCK8 { + regulator-name = "buck8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1: LDO1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2: LDO2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3: LDO3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4: LDO4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo5: LDO5 { + regulator-name = "ldo5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo6: LDO6 { + regulator-name = "ldo6"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo7: LDO7 { + regulator-name = "ldo7"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + bus-width = <4>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_usdhc2_vmmc>; + status = "okay"; +}; + +&usb3_phy0 { + status = "okay"; +}; + +&usb_dwc3_0 { + dr_mode = "otg"; + status = "okay"; +}; + +&usb3_phy1 { + status = "okay"; +}; + +&usb_dwc3_1 { + dr_mode = "host"; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000007f + MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x4000007f + >; + }; + + pinctrl_pmic: pmicirq { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x49 + MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x49 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83 + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc3 + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc3 + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc3 + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc3 + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc3 + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc3 + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc3 + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc3 + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc3 + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x83 + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x85 + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc5 + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc5 + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc5 + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc5 + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc5 + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc5 + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc5 + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc5 + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc5 + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x85 + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x87 + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc7 + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc7 + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc7 + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc7 + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc7 + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc7 + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc7 + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc7 + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc7 + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x87 + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2grpgpio { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x41 + MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x83 + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc3 + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc3 + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc3 + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc3 + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc3 + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x85 + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc5 + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc5 + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc5 + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc5 + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc5 + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x87 + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc7 + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc7 + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc7 + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc7 + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc7 + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi index 3dc44114da0e..602c870a7ccb 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi @@ -125,6 +125,12 @@ }; }; }; + + eeprom@50 { + compatible = "atmel,24c01"; + reg = <0x50>; + status = "okay"; + }; }; &pgc_gpu{ diff --git a/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts b/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts new file mode 100644 index 000000000000..b4795a032fa2 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts @@ -0,0 +1,581 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019 Einfochips + * Copyright 2019 Linaro Ltd. + */ + +/dts-v1/; + +#include "imx8mq.dtsi" + +/ { + model = "Einfochips i.MX8MQ Thor96"; + compatible = "einfochips,imx8mq-thor96", "fsl,imx8mq"; + + chosen { + stdout-path = &uart1; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x00000000 0x40000000 0 0x80000000>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + user-led1 { + label = "green:user1"; + gpios = <&gpio4 21 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + user-led2 { + label = "green:user2"; + gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + }; + + user-led3 { + label = "green:user3"; + gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc1"; + default-state = "off"; + }; + + user-led4 { + label = "green:user4"; + gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>; + panic-indicator; + linux,default-trigger = "none"; + }; + + wlan-active-led { + label = "yellow:wlan"; + gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + + bt-active-led { + label = "blue:bt"; + gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "hci0-power"; + default-state = "off"; + }; + }; + + reg_usdhc1_vmmc: reg-usdhc1-vmmc { + compatible = "regulator-fixed"; + regulator-name = "VDD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usdhc1_vqmmc: reg-usdhc1-vqmmc { + compatible = "regulator-fixed"; + regulator-name = "VCC_1V8_EXT"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + reg_usdhc2_vmmc: reg-usdhc2-vmmc { + compatible = "regulator-fixed"; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2>; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usdhc2_vqmmc: reg-usdhc2-vqmmc { + compatible = "regulator-fixed"; + regulator-name = "NVCC_SD2"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_reg_on>; + gpio = <&gpio3 3 GPIO_ACTIVE_HIGH>; + }; +}; + +/* LS-SPI0 */ +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + status = "okay"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + phy-handle = <ðphy>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@3 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <3>; + }; + }; +}; + +/* LS-I2C0 */ +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic@8 { + compatible = "fsl,pfuze100"; + reg = <0x8>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + sw3a_reg: sw3ab { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + regulator-always-on; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; +}; + +/* LS-I2C1 */ +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + eeprom: eeprom@50 { + compatible = "atmel,24c256"; + reg = <0x50>; + }; +}; + +/* HS-I2C2 */ +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +/* HS-I2C3 */ +&i2c4 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; +}; + +&pgc_gpu { + power-supply = <&sw1a_reg>; +}; + +&pgc_vpu { + power-supply = <&sw1c_reg>; +}; + +&qspi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi0>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + spi-max-frequency = <100000000>; + reg = <0>; + }; +}; + +/* Debug UART */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + assigned-clocks = <&clk IMX8MQ_CLK_UART1>; + assigned-clock-parents = <&clk IMX8MQ_CLK_25M>; + status = "okay"; +}; + +/* LS-UART0 */ +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + assigned-clocks = <&clk IMX8MQ_CLK_UART2>; + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + device-wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_bt_gpios>; + }; +}; + +/* LS-UART1 */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + assigned-clocks = <&clk IMX8MQ_CLK_UART3>; + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>; + status = "okay"; +}; + +&usb3_phy1 { + status = "okay"; +}; + +&usb_dwc3_1 { + dr_mode = "host"; + status = "okay"; +}; + +/* SDIO */ +&usdhc1 { + #address-cells = <0x1>; + #size-cells = <0x0>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + vmmc-supply = <®_usdhc1_vmmc>; + vqmmc-supply = <®_usdhc1_vqmmc>; + mmc-pwrseq = <&sdio_pwrseq>; + bus-width = <4>; + non-removable; + no-sd; + no-emmc; + status = "okay"; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +/* uSD */ +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + vmmc-supply = <®_usdhc2_vmmc>; + vqmmc-supply = <®_usdhc2_vqmmc>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + bus-width = <4>; + no-sdio; + no-emmc; + disable-wp; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_bt_gpios: btgpiosgrp { + fsl,pins = < + MX8MQ_IOMUXC_SAI5_RXD1_GPIO3_IO22 0x19 + MX8MQ_IOMUXC_NAND_DQS_GPIO3_IO14 0x19 + MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5 0x19 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX8MQ_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x16 + MX8MQ_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x16 + MX8MQ_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x16 + MX8MQ_IOMUXC_ECSPI2_SS0_ECSPI2_SS0 0x16 + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x4 + MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO 0x24 + MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1c + MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1c + MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1c + MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1c + MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1c + MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1c + MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000007f + MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x4000007f + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL 0x4000007f + MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA 0x4000007f + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL 0x4000007f + MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA 0x4000007f + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C4_SCL_I2C4_SCL 0x4000007f + MX8MQ_IOMUXC_I2C4_SDA_I2C4_SDA 0x4000007f + >; + }; + + pinctrl_leds: ledsgrp { + fsl,pins = < + MX8MQ_IOMUXC_SAI2_RXFS_GPIO4_IO21 0x19 + MX8MQ_IOMUXC_SAI2_RXC_GPIO4_IO22 0x19 + MX8MQ_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x19 + MX8MQ_IOMUXC_SAI3_RXC_GPIO4_IO29 0x19 + MX8MQ_IOMUXC_SAI1_RXC_GPIO4_IO1 0x19 + MX8MQ_IOMUXC_SAI1_RXFS_GPIO4_IO0 0x19 + >; + }; + + pinctrl_qspi0: qspi0grp { + fsl,pins = < + MX8MQ_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x82 + MX8MQ_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82 + MX8MQ_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x82 + MX8MQ_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x82 + MX8MQ_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x82 + MX8MQ_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x82 + + >; + }; + + pinctrl_reg_usdhc2: regusdhc2grp { + fsl,pins = < + MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x49 + MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x49 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX 0x49 + MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX 0x49 + MX8MQ_IOMUXC_UART4_RXD_UART2_DCE_CTS_B 0x49 + MX8MQ_IOMUXC_UART4_TXD_UART2_DCE_RTS_B 0x49 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX 0x49 + MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX 0x49 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83 + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc3 + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc3 + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc3 + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc3 + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc3 + MX8MQ_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x85 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x8d + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xcd + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xcd + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xcd + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xcd + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xcd + MX8MQ_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x85 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x9f + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xdf + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xdf + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xdf + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xdf + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xdf + MX8MQ_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x85 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x41 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x83 + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc3 + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc3 + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc3 + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc3 + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc3 + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x8c + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xcc + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xcc + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xcc + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xcc + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xcc + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x9c + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xdc + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xdc + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xdc + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xdc + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xdc + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xcc + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; + + pinctrl_wifi_reg_on: wifiregongrp { + fsl,pins = < + MX8MQ_IOMUXC_NAND_CE2_B_GPIO3_IO3 0x17059 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts index d2a6da479980..6b3581366d67 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts @@ -8,7 +8,7 @@ #include "imx8mq-zii-ultra.dtsi" / { - model = "ZII i.MX8MQ Ultra RMB3 Board"; + model = "ZII Ultra RMB3 Board"; compatible = "zii,imx8mq-ultra-rmb3", "zii,imx8mq-ultra", "fsl,imx8mq"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dts b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dts index 1084d9330403..173b9e9b2bbd 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dts @@ -8,7 +8,7 @@ #include "imx8mq-zii-ultra.dtsi" / { - model = "ZII i.MX8MQ Ultra Zest Board"; + model = "ZII Ultra Zest Board"; compatible = "zii,imx8mq-ultra-zest", "zii,imx8mq-ultra", "fsl,imx8mq"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index 7f9319452b58..6a1e83922c71 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -290,11 +290,67 @@ dma-ranges = <0x40000000 0x0 0x40000000 0xc0000000>; bus@30000000 { /* AIPS1 */ - compatible = "fsl,imx8mq-aips-bus", "simple-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x30000000 0x30000000 0x400000>; + sai1: sai@30010000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx8mq-sai"; + reg = <0x30010000 0x10000>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_SAI1_IPG>, + <&clk IMX8MQ_CLK_SAI1_ROOT>, + <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 8 24 0>, <&sdma1 9 24 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + sai6: sai@30030000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx8mq-sai"; + reg = <0x30030000 0x10000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_SAI6_IPG>, + <&clk IMX8MQ_CLK_SAI6_ROOT>, + <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 4 24 0>, <&sdma2 5 24 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + sai5: sai@30040000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx8mq-sai"; + reg = <0x30040000 0x10000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_SAI5_IPG>, + <&clk IMX8MQ_CLK_SAI5_ROOT>, + <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 2 24 0>, <&sdma2 3 24 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + sai4: sai@30050000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx8mq-sai"; + reg = <0x30050000 0x10000>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_SAI4_IPG>, + <&clk IMX8MQ_CLK_SAI4_ROOT>, + <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 0 24 0>, <&sdma2 1 24 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + gpio1: gpio@30200000 { compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio"; reg = <0x30200000 0x10000>; @@ -448,6 +504,23 @@ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; }; + lcdif: lcd-controller@30320000 { + compatible = "fsl,imx8mq-lcdif", "fsl,imx28-lcdif"; + reg = <0x30320000 0x10000>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_LCDIF_PIXEL>; + clock-names = "pix"; + assigned-clocks = <&clk IMX8MQ_VIDEO_PLL1_REF_SEL>, + <&clk IMX8MQ_VIDEO_PLL1_BYPASS>, + <&clk IMX8MQ_CLK_LCDIF_PIXEL>, + <&clk IMX8MQ_VIDEO_PLL1>; + assigned-clock-parents = <&clk IMX8MQ_CLK_25M>, + <&clk IMX8MQ_VIDEO_PLL1>, + <&clk IMX8MQ_VIDEO_PLL1_OUT>; + assigned-clock-rates = <0>, <0>, <0>, <594000000>; + status = "disabled"; + }; + iomuxc: iomuxc@30330000 { compatible = "fsl,imx8mq-iomuxc"; reg = <0x30330000 0x10000>; @@ -519,6 +592,8 @@ clock-names = "ckil", "osc_25m", "osc_27m", "clk_ext1", "clk_ext2", "clk_ext3", "clk_ext4"; + assigned-clocks = <&clk IMX8MQ_CLK_NOC>; + assigned-clock-rates = <800000000>; }; src: reset-controller@30390000 { @@ -617,7 +692,7 @@ }; bus@30400000 { /* AIPS2 */ - compatible = "fsl,imx8mq-aips-bus", "simple-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x30400000 0x30400000 0x400000>; @@ -676,7 +751,7 @@ }; bus@30800000 { /* AIPS3 */ - compatible = "fsl,imx8mq-aips-bus", "simple-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x30800000 0x30800000 0x400000>, @@ -765,6 +840,20 @@ status = "disabled"; }; + sai3: sai@308c0000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx8mq-sai"; + reg = <0x308c0000 0x10000>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_SAI3_IPG>, + <&clk IMX8MQ_CLK_SAI3_ROOT>, + <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma1 12 24 0>, <&sdma1 13 24 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + crypto: crypto@30900000 { compatible = "fsl,sec-v4.0"; #address-cells = <1>; @@ -934,7 +1023,7 @@ }; bus@32c00000 { /* AIPS4 */ - compatible = "fsl,imx8mq-aips-bus", "simple-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x32c00000 0x32c00000 0x400000>; @@ -1113,6 +1202,16 @@ interrupt-parent = <&gic>; }; + ddrc: memory-controller@3d400000 { + compatible = "fsl,imx8mq-ddrc", "fsl,imx8m-ddrc"; + reg = <0x3d400000 0x400000>; + clock-names = "core", "pll", "alt", "apb"; + clocks = <&clk IMX8MQ_CLK_DRAM_CORE>, + <&clk IMX8MQ_DRAM_PLL_OUT>, + <&clk IMX8MQ_CLK_DRAM_ALT>, + <&clk IMX8MQ_CLK_DRAM_APB>; + }; + ddr-pmu@3d800000 { compatible = "fsl,imx8mq-ddr-pmu", "fsl,imx8m-ddr-pmu"; reg = <0x3d800000 0x400000>; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi index 9646a41e0532..fb5f752b15fe 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi @@ -250,7 +250,6 @@ compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; reg = <0x5a060000 0x1000>; interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; - interrupt-parent = <&gic>; clocks = <&adma_lpcg IMX_ADMA_LPCG_UART0_IPG_CLK>, <&adma_lpcg IMX_ADMA_LPCG_UART0_BAUD_CLK>; clock-names = "ipg", "baud"; @@ -262,7 +261,6 @@ compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; reg = <0x5a070000 0x1000>; interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; - interrupt-parent = <&gic>; clocks = <&adma_lpcg IMX_ADMA_LPCG_UART1_IPG_CLK>, <&adma_lpcg IMX_ADMA_LPCG_UART1_BAUD_CLK>; clock-names = "ipg", "baud"; @@ -274,7 +272,6 @@ compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; reg = <0x5a080000 0x1000>; interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; - interrupt-parent = <&gic>; clocks = <&adma_lpcg IMX_ADMA_LPCG_UART2_IPG_CLK>, <&adma_lpcg IMX_ADMA_LPCG_UART2_BAUD_CLK>; clock-names = "ipg", "baud"; @@ -286,7 +283,6 @@ compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; reg = <0x5a090000 0x1000>; interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>; - interrupt-parent = <&gic>; clocks = <&adma_lpcg IMX_ADMA_LPCG_UART3_IPG_CLK>, <&adma_lpcg IMX_ADMA_LPCG_UART3_BAUD_CLK>; clock-names = "ipg", "baud"; @@ -298,7 +294,6 @@ compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; reg = <0x5a800000 0x4000>; interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; - interrupt-parent = <&gic>; clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C0_CLK>; clock-names = "per"; assigned-clocks = <&clk IMX_ADMA_I2C0_CLK>; @@ -311,7 +306,6 @@ compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; reg = <0x5a810000 0x4000>; interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; - interrupt-parent = <&gic>; clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C1_CLK>; clock-names = "per"; assigned-clocks = <&clk IMX_ADMA_I2C1_CLK>; @@ -324,7 +318,6 @@ compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; reg = <0x5a820000 0x4000>; interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>; - interrupt-parent = <&gic>; clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C2_CLK>; clock-names = "per"; assigned-clocks = <&clk IMX_ADMA_I2C2_CLK>; @@ -337,7 +330,6 @@ compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; reg = <0x5a830000 0x4000>; interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; - interrupt-parent = <&gic>; clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C3_CLK>; clock-names = "per"; assigned-clocks = <&clk IMX_ADMA_I2C3_CLK>; @@ -361,7 +353,6 @@ usdhc1: mmc@5b010000 { compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; - interrupt-parent = <&gic>; interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>; reg = <0x5b010000 0x10000>; clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC0_IPG_CLK>, @@ -374,7 +365,6 @@ usdhc2: mmc@5b020000 { compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; - interrupt-parent = <&gic>; interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>; reg = <0x5b020000 0x10000>; clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC1_IPG_CLK>, @@ -389,7 +379,6 @@ usdhc3: mmc@5b030000 { compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; - interrupt-parent = <&gic>; interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>; reg = <0x5b030000 0x10000>; clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC2_IPG_CLK>, @@ -446,7 +435,6 @@ ddr-pmu@5c020000 { compatible = "fsl,imx8-ddr-pmu"; reg = <0x5c020000 0x10000>; - interrupt-parent = <&gic>; interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; }; }; diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts b/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts index c563d3eb2d98..7d370dac4c85 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts +++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts @@ -170,6 +170,7 @@ }; &ir { + linux,rc-map-name = "rc-hisi-poplar"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi index 13821a0ff524..12bc1d3ed424 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi @@ -564,7 +564,7 @@ #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - bus-range = <0 15>; + bus-range = <0x00 0xff>; num-lanes = <1>; ranges = <0x81000000 0x0 0x00000000 0x4f00000 0x0 0x100000 0x82000000 0x0 0x3000000 0x3000000 0x0 0x01f00000>; diff --git a/arch/arm64/boot/dts/intel/Makefile b/arch/arm64/boot/dts/intel/Makefile index 1253af30da8e..40cb16e8c814 100644 --- a/arch/arm64/boot/dts/intel/Makefile +++ b/arch/arm64/boot/dts/intel/Makefile @@ -1,2 +1,3 @@ # SPDX-License-Identifier: GPL-2.0-only -dtb-$(CONFIG_ARCH_AGILEX) += socfpga_agilex_socdk.dtb +dtb-$(CONFIG_ARCH_AGILEX) += socfpga_agilex_socdk.dtb \ + socfpga_agilex_socdk_nand.dtb diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi index 94090c6fb946..e1d357eaad7c 100644 --- a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi +++ b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi @@ -60,10 +60,10 @@ pmu { compatible = "arm,armv8-pmuv3"; - interrupts = <0 120 8>, - <0 121 8>, - <0 122 8>, - <0 123 8>; + interrupts = <0 170 4>, + <0 171 4>, + <0 172 4>, + <0 173 4>; interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, @@ -113,6 +113,7 @@ rx-fifo-depth = <16384>; snps,multicast-filter-bins = <256>; iommus = <&smmu 1>; + altr,sysmgr-syscon = <&sysmgr 0x44 0>; status = "disabled"; }; @@ -128,6 +129,7 @@ rx-fifo-depth = <16384>; snps,multicast-filter-bins = <256>; iommus = <&smmu 2>; + altr,sysmgr-syscon = <&sysmgr 0x48 8>; status = "disabled"; }; @@ -143,6 +145,7 @@ rx-fifo-depth = <16384>; snps,multicast-filter-bins = <256>; iommus = <&smmu 3>; + altr,sysmgr-syscon = <&sysmgr 0x4c 16>; status = "disabled"; }; @@ -249,6 +252,18 @@ status = "disabled"; }; + nand: nand@ffb90000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "altr,socfpga-denali-nand"; + reg = <0xffb90000 0x10000>, + <0xffb80000 0x1000>; + reg-names = "nand_data", "denali_reg"; + interrupts = <0 97 4>; + resets = <&rst NAND_RESET>, <&rst NAND_OCP_RESET>; + status = "disabled"; + }; + ocram: sram@ffe00000 { compatible = "mmio-sram"; reg = <0xffe00000 0x40000>; @@ -325,7 +340,7 @@ }; sysmgr: sysmgr@ffd12000 { - compatible = "altr,sys-mgr", "syscon"; + compatible = "altr,sys-mgr-s10","altr,sys-mgr"; reg = <0xffd12000 0x500>; }; @@ -449,6 +464,65 @@ reg = <0xf8011100 0xc0>; }; + eccmgr { + compatible = "altr,socfpga-s10-ecc-manager", + "altr,socfpga-a10-ecc-manager"; + altr,sysmgr-syscon = <&sysmgr>; + #address-cells = <1>; + #size-cells = <1>; + interrupts = <0 15 4>; + interrupt-controller; + #interrupt-cells = <2>; + ranges; + + sdramedac { + compatible = "altr,sdram-edac-s10"; + altr,sdr-syscon = <&sdr>; + interrupts = <16 4>; + }; + + ocram-ecc@ff8cc000 { + compatible = "altr,socfpga-s10-ocram-ecc", + "altr,socfpga-a10-ocram-ecc"; + reg = <0xff8cc000 0x100>; + altr,ecc-parent = <&ocram>; + interrupts = <1 4>; + }; + + usb0-ecc@ff8c4000 { + compatible = "altr,socfpga-s10-usb-ecc", + "altr,socfpga-usb-ecc"; + reg = <0xff8c4000 0x100>; + altr,ecc-parent = <&usb0>; + interrupts = <2 4>; + }; + + emac0-rx-ecc@ff8c0000 { + compatible = "altr,socfpga-s10-eth-mac-ecc", + "altr,socfpga-eth-mac-ecc"; + reg = <0xff8c0000 0x100>; + altr,ecc-parent = <&gmac0>; + interrupts = <4 4>; + }; + + emac0-tx-ecc@ff8c0400 { + compatible = "altr,socfpga-s10-eth-mac-ecc", + "altr,socfpga-eth-mac-ecc"; + reg = <0xff8c0400 0x100>; + altr,ecc-parent = <&gmac0>; + interrupts = <5 4>; + }; + + sdmmca-ecc@ff8c8c00 { + compatible = "altr,socfpga-s10-sdmmc-ecc", + "altr,socfpga-sdmmc-ecc"; + reg = <0xff8c8c00 0x100>; + altr,ecc-parent = <&mmc>; + interrupts = <14 4>, + <15 4>; + }; + }; + qspi: spi@ff8d2000 { compatible = "cdns,qspi-nor"; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk_nand.dts b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk_nand.dts new file mode 100644 index 000000000000..979aa59a6bd0 --- /dev/null +++ b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk_nand.dts @@ -0,0 +1,135 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019, Intel Corporation + */ +#include "socfpga_agilex.dtsi" + +/ { + model = "SoCFPGA Agilex SoCDK"; + + aliases { + serial0 = &uart0; + ethernet0 = &gmac0; + ethernet1 = &gmac1; + ethernet2 = &gmac2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + hps0 { + label = "hps_led0"; + gpios = <&portb 20 GPIO_ACTIVE_HIGH>; + }; + + hps1 { + label = "hps_led1"; + gpios = <&portb 19 GPIO_ACTIVE_HIGH>; + }; + + hps2 { + label = "hps_led2"; + gpios = <&portb 21 GPIO_ACTIVE_HIGH>; + }; + }; + + memory { + device_type = "memory"; + /* We expect the bootloader to fill in the reg */ + reg = <0 0 0 0>; + }; + + soc { + clocks { + osc1 { + clock-frequency = <25000000>; + }; + }; + }; +}; + +&gpio1 { + status = "okay"; +}; + +&gmac2 { + status = "okay"; + phy-mode = "rgmii"; + phy-handle = <&phy0>; + + max-frame-size = <9000>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy0: ethernet-phy@0 { + reg = <4>; + + txd0-skew-ps = <0>; /* -420ps */ + txd1-skew-ps = <0>; /* -420ps */ + txd2-skew-ps = <0>; /* -420ps */ + txd3-skew-ps = <0>; /* -420ps */ + rxd0-skew-ps = <420>; /* 0ps */ + rxd1-skew-ps = <420>; /* 0ps */ + rxd2-skew-ps = <420>; /* 0ps */ + rxd3-skew-ps = <420>; /* 0ps */ + txen-skew-ps = <0>; /* -420ps */ + txc-skew-ps = <900>; /* 0ps */ + rxdv-skew-ps = <420>; /* 0ps */ + rxc-skew-ps = <1680>; /* 780ps */ + }; + }; +}; + +&nand { + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + nand-bus-width = <16>; + + partition@0 { + label = "u-boot"; + reg = <0 0x200000>; + }; + partition@200000 { + label = "env"; + reg = <0x200000 0x40000>; + }; + partition@240000 { + label = "dtb"; + reg = <0x240000 0x40000>; + }; + partition@280000 { + label = "kernel"; + reg = <0x280000 0x2000000>; + }; + partition@2280000 { + label = "misc"; + reg = <0x2280000 0x2000000>; + }; + partition@4280000 { + label = "rootfs"; + reg = <0x4280000 0x3bd80000>; + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +&usb0 { + status = "okay"; + disable-over-current; +}; + +&watchdog0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts index bd4aab6092e0..7eb6c1796cef 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts @@ -69,6 +69,7 @@ mod-def0-gpio = <&gpiosb 3 GPIO_ACTIVE_LOW>; tx-disable-gpio = <&gpiosb 4 GPIO_ACTIVE_HIGH>; tx-fault-gpio = <&gpiosb 5 GPIO_ACTIVE_HIGH>; + maximum-power-milliwatt = <3000>; }; sfp_eth1: sfp-eth1 { @@ -78,6 +79,7 @@ mod-def0-gpio = <&gpiosb 8 GPIO_ACTIVE_LOW>; tx-disable-gpio = <&gpiosb 9 GPIO_ACTIVE_HIGH>; tx-fault-gpio = <&gpiosb 10 GPIO_ACTIVE_HIGH>; + maximum-power-milliwatt = <3000>; }; }; @@ -119,12 +121,14 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins>; + /delete-property/mrvl,i2c-fast-mode; }; &i2c1 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&i2c2_pins>; + /delete-property/mrvl,i2c-fast-mode; lm75@48 { status = "okay"; @@ -143,6 +147,7 @@ phy-mode = "sgmii"; status = "okay"; managed = "in-band-status"; + phys = <&comphy1 0>; sfp = <&sfp_eth0>; }; @@ -150,11 +155,14 @@ phy-mode = "sgmii"; status = "okay"; managed = "in-band-status"; + phys = <&comphy0 1>; sfp = <&sfp_eth1>; }; &usb3 { status = "okay"; + phys = <&usb2_utmi_otg_phy>; + phy-names = "usb2-utmi-otg-phy"; }; &uart0 { diff --git a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts index bd881497b872..a211a046b2f2 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts @@ -408,6 +408,8 @@ reg = <5>; label = "cpu"; ethernet = <&cp1_eth2>; + phy-mode = "2500base-x"; + managed = "in-band-status"; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi index 15f1842f6df3..8b4e806d5119 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi @@ -157,6 +157,7 @@ enable-method = "psci"; cpu-idle-states = <&CPU_SLEEP_0>; #cooling-cells = <2>; + dynamic-power-coefficient = <263>; clocks = <&infracfg CLK_INFRA_CA53SEL>, <&apmixedsys CLK_APMIXED_MAINPLL>; clock-names = "cpu", "intermediate"; @@ -170,6 +171,7 @@ enable-method = "psci"; cpu-idle-states = <&CPU_SLEEP_0>; #cooling-cells = <2>; + dynamic-power-coefficient = <263>; clocks = <&infracfg CLK_INFRA_CA53SEL>, <&apmixedsys CLK_APMIXED_MAINPLL>; clock-names = "cpu", "intermediate"; @@ -183,6 +185,7 @@ enable-method = "psci"; cpu-idle-states = <&CPU_SLEEP_0>; #cooling-cells = <2>; + dynamic-power-coefficient = <530>; clocks = <&infracfg CLK_INFRA_CA72SEL>, <&apmixedsys CLK_APMIXED_MAINPLL>; clock-names = "cpu", "intermediate"; @@ -196,6 +199,7 @@ enable-method = "psci"; cpu-idle-states = <&CPU_SLEEP_0>; #cooling-cells = <2>; + dynamic-power-coefficient = <530>; clocks = <&infracfg CLK_INFRA_CA72SEL>, <&apmixedsys CLK_APMIXED_MAINPLL>; clock-names = "cpu", "intermediate"; @@ -1401,6 +1405,20 @@ <&topckgen CLK_TOP_UNIVPLL1_D2>; }; + jpegdec: jpegdec@18004000 { + compatible = "mediatek,mt8173-jpgdec"; + reg = <0 0x18004000 0 0x1000>; + interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_LOW>; + clocks = <&vencsys CLK_VENC_CKE0>, + <&vencsys CLK_VENC_CKE3>; + clock-names = "jpgdec-smi", + "jpgdec"; + power-domains = <&scpsys MT8173_POWER_DOMAIN_VENC>; + mediatek,larb = <&larb3>; + iommus = <&iommu M4U_PORT_JPGDEC_WDMA>, + <&iommu M4U_PORT_JPGDEC_BSDMA>; + }; + vencltsys: clock-controller@19000000 { compatible = "mediatek,mt8173-vencltsys", "syscon"; reg = <0 0x19000000 0 0x1000>; diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi index 10b32471bc7b..124f9d3e09f5 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/clock/mt8183-clk.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/reset-controller/mt8183-resets.h> #include "mt8183-pinfunc.h" / { @@ -227,6 +228,7 @@ compatible = "mediatek,mt8183-infracfg", "syscon"; reg = <0 0x10001000 0 0x1000>; #clock-cells = <1>; + #reset-cells = <1>; }; pio: pinctrl@10005000 { @@ -278,6 +280,15 @@ clock-names = "clk13m"; }; + gce: mailbox@10238000 { + compatible = "mediatek,mt8183-gce"; + reg = <0 0x10238000 0 0x4000>; + interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_LOW>; + #mbox-cells = <3>; + clocks = <&infracfg CLK_INFRA_GCE>; + clock-names = "gce"; + }; + auxadc: auxadc@11001000 { compatible = "mediatek,mt8183-auxadc", "mediatek,mt8173-auxadc"; diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi index 631a7f77c386..6238e6e274b4 100644 --- a/arch/arm64/boot/dts/nvidia/tegra132.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi @@ -604,9 +604,11 @@ #iommu-cells = <1>; }; - emc: emc@7001b000 { + emc: external-memory-controller@7001b000 { compatible = "nvidia,tegra132-emc", "nvidia,tegra124-emc"; reg = <0x0 0x7001b000 0x0 0x1000>; + clocks = <&tegra_car TEGRA124_CLK_EMC>; + clock-names = "emc"; nvidia,memory-controller = <&mc>; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi index 5e18acf5cfad..947744d0f04c 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi @@ -8,6 +8,7 @@ compatible = "nvidia,p3310", "nvidia,tegra186"; aliases { + ethernet0 = "/ethernet@2490000"; sdhci0 = "/sdhci@3460000"; sdhci1 = "/sdhci@3400000"; serial0 = &uarta; diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi index 7893d78a0fb6..c905527c26ef 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi @@ -142,7 +142,29 @@ memory-controller@2c00000 { compatible = "nvidia,tegra186-mc"; reg = <0x0 0x02c00000 0x0 0xb0000>; + interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; + + #address-cells = <2>; + #size-cells = <2>; + + ranges = <0x0 0x02c00000 0x0 0x02c00000 0x0 0xb0000>; + + /* + * Memory clients have access to all 40 bits that the memory + * controller can address. + */ + dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>; + + emc: external-memory-controller@2c60000 { + compatible = "nvidia,tegra186-emc"; + reg = <0x0 0x02c60000 0x0 0x50000>; + interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA186_CLK_EMC>; + clock-names = "emc"; + + nvidia,bpmp = <&bpmp>; + }; }; uarta: serial@3100000 { @@ -524,12 +546,9 @@ reg = <0x0 0x03530000 0x0 0x8000>, <0x0 0x03538000 0x0 0x1000>; reg-names = "hcd", "fpci"; - - iommus = <&smmu TEGRA186_SID_XUSB_HOST>; interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&bpmp TEGRA186_CLK_XUSB_HOST>, <&bpmp TEGRA186_CLK_XUSB_FALCON>, <&bpmp TEGRA186_CLK_XUSB_SS>, @@ -542,16 +561,15 @@ clock-names = "xusb_host", "xusb_falcon_src", "xusb_ss", "xusb_ss_src", "xusb_hs_src", "xusb_fs_src", "pll_u_480m", "clk_m", "pll_e"; - power-domains = <&bpmp TEGRA186_POWER_DOMAIN_XUSBC>, <&bpmp TEGRA186_POWER_DOMAIN_XUSBA>; power-domain-names = "xusb_host", "xusb_ss"; - nvidia,xusb-padctl = <&padctl>; - - status = "disabled"; - + iommus = <&smmu TEGRA186_SID_XUSB_HOST>; #address-cells = <1>; #size-cells = <0>; + status = "disabled"; + + nvidia,xusb-padctl = <&padctl>; }; fuse@3820000 { diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi index c7f2a20e6b02..bdd33ff4e324 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi @@ -48,6 +48,10 @@ }; }; + memory-controller@2c00000 { + status = "okay"; + }; + serial@3110000 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts index 353a6a22196d..985e7d84f161 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts @@ -152,7 +152,7 @@ gpios = <&gpio TEGRA194_MAIN_GPIO(G, 0) GPIO_ACTIVE_LOW>; linux,input-type = <EV_KEY>; - linux,code = <BTN_1>; + linux,code = <KEY_SLEEP>; debounce-interval = <10>; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi index 11220d97adb8..ccac43be12ac 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi @@ -7,6 +7,7 @@ #include <dt-bindings/power/tegra194-powergate.h> #include <dt-bindings/reset/tegra194-reset.h> #include <dt-bindings/thermal/tegra194-bpmp-thermal.h> +#include <dt-bindings/memory/tegra194-mc.h> / { compatible = "nvidia,tegra194"; @@ -21,6 +22,12 @@ #size-cells = <1>; ranges = <0x0 0x0 0x0 0x40000000>; + misc@100000 { + compatible = "nvidia,tegra194-misc"; + reg = <0x00100000 0xf000>, + <0x0010f000 0x1000>; + }; + gpio: gpio@2200000 { compatible = "nvidia,tegra194-gpio"; reg-names = "security", "gpio"; @@ -164,6 +171,48 @@ }; }; + mc: memory-controller@2c00000 { + compatible = "nvidia,tegra194-mc"; + reg = <0x02c00000 0x100000>, + <0x02b80000 0x040000>, + <0x01700000 0x100000>; + status = "disabled"; + + #address-cells = <2>; + #size-cells = <2>; + + ranges = <0x01700000 0x0 0x01700000 0x0 0x100000>, + <0x02b80000 0x0 0x02b80000 0x0 0x040000>, + <0x02c00000 0x0 0x02c00000 0x0 0x100000>; + + /* + * Bit 39 of addresses passing through the memory + * controller selects the XBAR format used when memory + * is accessed. This is used to transparently access + * memory in the XBAR format used by the discrete GPU + * (bit 39 set) or Tegra (bit 39 clear). + * + * As a consequence, the operating system must ensure + * that bit 39 is never used implicitly, for example + * via an I/O virtual address mapping of an IOMMU. If + * devices require access to the XBAR switch, their + * drivers must set this bit explicitly. + * + * Limit the DMA range for memory clients to [38:0]. + */ + dma-ranges = <0x0 0x0 0x0 0x80 0x0>; + + emc: external-memory-controller@2c60000 { + compatible = "nvidia,tegra194-emc"; + reg = <0x0 0x02c60000 0x0 0x90000>, + <0x0 0x01780000 0x0 0x80000>; + clocks = <&bpmp TEGRA194_CLK_EMC>; + clock-names = "emc"; + + nvidia,bpmp = <&bpmp>; + }; + }; + uarta: serial@3100000 { compatible = "nvidia,tegra194-uart", "nvidia,tegra20-uart"; reg = <0x03100000 0x40>; @@ -488,6 +537,13 @@ status = "disabled"; }; + fuse@3820000 { + compatible = "nvidia,tegra194-efuse"; + reg = <0x03820000 0x10000>; + clocks = <&bpmp TEGRA194_CLK_FUSE>; + clock-names = "fuse"; + }; + gic: interrupt-controller@3881000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts index 90381d52ac54..9101d3a39cd2 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts @@ -536,6 +536,19 @@ vmmc-supply = <&vdd_3v3_sd>; }; + sdhci@700b0400 { + status = "okay"; + bus-width = <4>; + + vqmmc-supply = <&vdd_1v8>; + vmmc-supply = <&vdd_3v3_sys>; + + non-removable; + cap-sdio-irq; + keep-power-in-suspend; + wakeup-source; + }; + clocks { compatible = "simple-bus"; #address-cells = <1>; @@ -573,6 +586,66 @@ }; }; + fan: fan { + compatible = "pwm-fan"; + pwms = <&pwm 3 45334>; + + cooling-levels = <0 64 128 255>; + #cooling-cells = <2>; + }; + + thermal-zones { + cpu { + trips { + cpu_trip_critical: critical { + temperature = <96500>; + hysteresis = <0>; + type = "critical"; + }; + + cpu_trip_hot: hot { + temperature = <70000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpu_trip_active: active { + temperature = <50000>; + hysteresis = <2000>; + type = "active"; + }; + + cpu_trip_passive: passive { + temperature = <30000>; + hysteresis = <2000>; + type = "passive"; + }; + }; + + cooling-maps { + cpu-critical { + cooling-device = <&fan 3 3>; + trip = <&cpu_trip_critical>; + }; + + cpu-hot { + cooling-device = <&fan 2 2>; + trip = <&cpu_trip_hot>; + }; + + cpu-active { + cooling-device = <&fan 1 1>; + trip = <&cpu_trip_active>; + }; + + cpu-passive { + cooling-device = <&fan 0 0>; + trip = <&cpu_trip_passive>; + }; + }; + }; + }; + gpio-keys { compatible = "gpio-keys"; diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 6498a1ec893f..973c0f079659 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb +dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8150.dtb @@ -13,6 +14,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8998-asus-novago-tp370ql.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-hp-envy-x2.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-lenovo-miix-630.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r2.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r3.dtb diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi index ec2f0de67993..aff218c1b7b6 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi @@ -8,6 +8,15 @@ pinconf { pins = "gpio3"; function = PMIC_GPIO_FUNC_NORMAL; + input-disable; + output-high; + }; + }; + + usb_hub_reset_pm_device: usb_hub_reset_pm_device { + pinconf { + pins = "gpio3"; + function = PMIC_GPIO_FUNC_NORMAL; output-low; }; }; @@ -22,6 +31,16 @@ }; }; + usb_sw_sel_pm_device: usb_sw_sel_pm_device { + pinconf { + pins = "gpio4"; + function = PMIC_GPIO_FUNC_NORMAL; + power-source = <PM8916_GPIO_VPH>; + input-disable; + output-low; + }; + }; + pm8916_gpios_leds: pm8916_gpios_leds { pinconf { pins = "gpio1", "gpio2"; diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi index e12a36ce5d93..037e26b3f8d5 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi @@ -358,14 +358,15 @@ }; usb@78d9000 { - extcon = <&usb_id>; + extcon = <&usb_id>, <&usb_id>; status = "okay"; adp-disable; hnp-disable; srp-disable; - dr_mode = "host"; - pinctrl-names = "default"; - pinctrl-0 = <&usb_sw_sel_pm>; + dr_mode = "otg"; + pinctrl-names = "default", "device"; + pinctrl-0 = <&usb_sw_sel_pm &usb_hub_reset_pm>; + pinctrl-1 = <&usb_sw_sel_pm_device &usb_hub_reset_pm_device>; ulpi { phy { v1p8-supply = <&pm8916_l7>; @@ -504,7 +505,7 @@ usb_id: usb-id { compatible = "linux,extcon-usb-gpio"; - vbus-gpio = <&msmgpio 121 GPIO_ACTIVE_HIGH>; + id-gpio = <&msmgpio 121 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb_id_default>; }; diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c-pins.dtsi deleted file mode 100644 index a5cc80d6e82f..000000000000 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c-pins.dtsi +++ /dev/null @@ -1,109 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (c) 2013-2016, The Linux Foundation. All rights reserved. - */ -&msmgpio { - sdc2_cd_on: sdc2_cd_on { - mux { - pins = "gpio38"; - function = "gpio"; - }; - - config { - pins = "gpio38"; - bias-pull-up; /* pull up */ - drive-strength = <16>; /* 16 MA */ - }; - }; - - sdc2_cd_off: sdc2_cd_off { - mux { - pins = "gpio38"; - function = "gpio"; - }; - - config { - pins = "gpio38"; - bias-pull-up; /* pull up */ - drive-strength = <2>; /* 2 MA */ - }; - }; - - blsp1_uart1_default: blsp1_uart1_default { - mux { - pins = "gpio41", "gpio42", "gpio43", "gpio44"; - function = "blsp_uart2"; - }; - - config { - pins = "gpio41", "gpio42", "gpio43", "gpio44"; - drive-strength = <16>; - bias-disable; - }; - }; - - blsp1_uart1_sleep: blsp1_uart1_sleep { - mux { - pins = "gpio41", "gpio42", "gpio43", "gpio44"; - function = "gpio"; - }; - - config { - pins = "gpio41", "gpio42", "gpio43", "gpio44"; - drive-strength = <2>; - bias-disable; - }; - }; - - hdmi_hpd_active: hdmi_hpd_active { - mux { - pins = "gpio34"; - function = "hdmi_hot"; - }; - - config { - pins = "gpio34"; - bias-pull-down; - drive-strength = <16>; - }; - }; - - hdmi_hpd_suspend: hdmi_hpd_suspend { - mux { - pins = "gpio34"; - function = "hdmi_hot"; - }; - - config { - pins = "gpio34"; - bias-pull-down; - drive-strength = <2>; - }; - }; - - hdmi_ddc_active: hdmi_ddc_active { - mux { - pins = "gpio32", "gpio33"; - function = "hdmi_ddc"; - }; - - config { - pins = "gpio32", "gpio33"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - hdmi_ddc_suspend: hdmi_ddc_suspend { - mux { - pins = "gpio32", "gpio33"; - function = "hdmi_ddc"; - }; - - config { - pins = "gpio32", "gpio33"; - drive-strength = <2>; - bias-pull-down; - }; - }; -}; diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi deleted file mode 100644 index 31a3e3311ad5..000000000000 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi +++ /dev/null @@ -1,92 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 - -#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> -&pm8994_gpios { - - pinctrl-names = "default"; - pinctrl-0 = <&ls_exp_gpio_f &bt_en_gpios>; - - ls_exp_gpio_f: pm8994_gpio5 { - pinconf { - pins = "gpio5"; - output-low; - power-source = <2>; // PM8994_GPIO_S4, 1.8V - }; - }; - - bt_en_gpios: bt_en_gpios { - pinconf { - pins = "gpio19"; - function = PMIC_GPIO_FUNC_NORMAL; - output-low; - power-source = <PM8994_GPIO_S4>; // 1.8V - qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; - bias-pull-down; - }; - }; - - wlan_en_gpios: wlan_en_gpios { - pinconf { - pins = "gpio8"; - function = PMIC_GPIO_FUNC_NORMAL; - output-low; - power-source = <PM8994_GPIO_S4>; // 1.8V - qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; - bias-pull-down; - }; - }; - - audio_mclk: clk_div1 { - pinconf { - pins = "gpio15"; - function = "func1"; - power-source = <PM8994_GPIO_S4>; // 1.8V - }; - }; - - volume_up_gpio: pm8996_gpio2 { - pinconf { - pins = "gpio2"; - function = "normal"; - input-enable; - drive-push-pull; - bias-pull-up; - qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; - power-source = <PM8994_GPIO_S4>; // 1.8V - }; - }; - - divclk4_pin_a: divclk4 { - pinconf { - pins = "gpio18"; - function = PMIC_GPIO_FUNC_FUNC2; - - bias-disable; - power-source = <PM8994_GPIO_S4>; - }; - }; - - usb3_vbus_det_gpio: pm8996_gpio22 { - pinconf { - pins = "gpio22"; - function = PMIC_GPIO_FUNC_NORMAL; - input-enable; - bias-pull-down; - qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; - power-source = <PM8994_GPIO_S4>; // 1.8V - }; - }; -}; - -&pmi8994_gpios { - usb2_vbus_det_gpio: pmi8996_gpio6 { - pinconf { - pins = "gpio6"; - function = PMIC_GPIO_FUNC_NORMAL; - input-enable; - bias-pull-down; - qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; - power-source = <PM8994_GPIO_S4>; // 1.8V - }; - }; -}; diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi index dba3488492f1..fff6115f2670 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi @@ -6,10 +6,9 @@ #include "msm8996.dtsi" #include "pm8994.dtsi" #include "pmi8994.dtsi" -#include "apq8096-db820c-pins.dtsi" -#include "apq8096-db820c-pmic-pins.dtsi" #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/sound/qcom,q6afe.h> #include <dt-bindings/sound/qcom,q6asm.h> @@ -78,611 +77,837 @@ }; }; - soc { - serial@7570000 { - label = "BT-UART"; - status = "okay"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp1_uart1_default>; - pinctrl-1 = <&blsp1_uart1_sleep>; - - bluetooth { - compatible = "qcom,qca6174-bt"; + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; - /* bt_disable_n gpio */ - enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&volume_up_gpio>; - clocks = <&divclk4>; - }; + button@0 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>; }; + }; - serial@75b0000 { - label = "LS-UART1"; - status = "okay"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp2_uart1_2pins_default>; - pinctrl-1 = <&blsp2_uart1_2pins_sleep>; - }; - - serial@75b1000 { - label = "LS-UART0"; - status = "disabled"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp2_uart2_4pins_default>; - pinctrl-1 = <&blsp2_uart2_4pins_sleep>; - }; - - i2c@7577000 { - /* On Low speed expansion */ - label = "LS-I2C0"; - status = "okay"; - }; - - i2c@75b6000 { - /* On Low speed expansion */ - label = "LS-I2C1"; - status = "okay"; - }; - - spi@7575000 { - /* On Low speed expansion */ - label = "LS-SPI0"; - status = "okay"; - }; - - i2c@75b5000 { - /* On High speed expansion */ - label = "HS-I2C2"; - status = "okay"; - }; - - spi@75ba000{ - /* On High speed expansion */ - label = "HS-SPI1"; - status = "okay"; - }; - - sdhci@74a4900 { - /* External SD card */ - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; - cd-gpios = <&msmgpio 38 0x1>; - vmmc-supply = <&pm8994_l21>; - vqmmc-supply = <&pm8994_l13>; - status = "okay"; - }; - - phy@627000 { - status = "okay"; - }; - - ufshc@624000 { - status = "okay"; - }; - - pinctrl@1010000 { - gpio-line-names = - "[SPI0_DOUT]", /* GPIO_0, BLSP1_SPI_MOSI, LSEC pin 14 */ - "[SPI0_DIN]", /* GPIO_1, BLSP1_SPI_MISO, LSEC pin 10 */ - "[SPI0_CS]", /* GPIO_2, BLSP1_SPI_CS_N, LSEC pin 12 */ - "[SPI0_SCLK]", /* GPIO_3, BLSP1_SPI_CLK, LSEC pin 8 */ - "[UART1_TxD]", /* GPIO_4, BLSP8_UART_TX, LSEC pin 11 */ - "[UART1_RxD]", /* GPIO_5, BLSP8_UART_RX, LSEC pin 13 */ - "[I2C1_SDA]", /* GPIO_6, BLSP8_I2C_SDA, LSEC pin 21 */ - "[I2C1_SCL]", /* GPIO_7, BLSP8_I2C_SCL, LSEC pin 19 */ - "GPIO-H", /* GPIO_8, LCD0_RESET_N, LSEC pin 30 */ - "TP93", /* GPIO_9 */ - "GPIO-G", /* GPIO_10, MDP_VSYNC_P, LSEC pin 29 */ - "[MDP_VSYNC_S]", /* GPIO_11, S HSEC pin 55 */ - "NC", /* GPIO_12 */ - "[CSI0_MCLK]", /* GPIO_13, CAM_MCLK0, P HSEC pin 15 */ - "[CAM_MCLK1]", /* GPIO_14, J14 pin 11 */ - "[CSI1_MCLK]", /* GPIO_15, CAM_MCLK2, P HSEC pin 17 */ - "TP99", /* GPIO_16 */ - "[I2C2_SDA]", /* GPIO_17, CCI_I2C_SDA0, P HSEC pin 34 */ - "[I2C2_SCL]", /* GPIO_18, CCI_I2C_SCL0, P HSEC pin 32 */ - "[CCI_I2C_SDA1]", /* GPIO_19, S HSEC pin 38 */ - "[CCI_I2C_SCL1]", /* GPIO_20, S HSEC pin 36 */ - "FLASH_STROBE_EN", /* GPIO_21, S HSEC pin 5 */ - "FLASH_STROBE_TRIG", /* GPIO_22, S HSEC pin 1 */ - "GPIO-K", /* GPIO_23, CAM2_RST_N, LSEC pin 33 */ - "GPIO-D", /* GPIO_24, LSEC pin 26 */ - "GPIO-I", /* GPIO_25, CAM0_RST_N, LSEC pin 31 */ - "GPIO-J", /* GPIO_26, CAM0_STANDBY_N, LSEC pin 32 */ - "BLSP6_I2C_SDA", /* GPIO_27 */ - "BLSP6_I2C_SCL", /* GPIO_28 */ - "GPIO-B", /* GPIO_29, TS0_RESET_N, LSEC pin 24 */ - "GPIO30", /* GPIO_30, S HSEC pin 4 */ - "HDMI_CEC", /* GPIO_31 */ - "HDMI_DDC_CLOCK", /* GPIO_32 */ - "HDMI_DDC_DATA", /* GPIO_33 */ - "HDMI_HOT_PLUG_DETECT", /* GPIO_34 */ - "PCIE0_RST_N", /* GPIO_35 */ - "PCIE0_CLKREQ_N", /* GPIO_36 */ - "PCIE0_WAKE", /* GPIO_37 */ - "SD_CARD_DET_N", /* GPIO_38 */ - "TSIF1_SYNC", /* GPIO_39, S HSEC pin 48 */ - "W_DISABLE_N", /* GPIO_40 */ - "[BLSP9_UART_TX]", /* GPIO_41 */ - "[BLSP9_UART_RX]", /* GPIO_42 */ - "[BLSP2_UART_CTS_N]", /* GPIO_43 */ - "[BLSP2_UART_RFR_N]", /* GPIO_44 */ - "[BLSP3_UART_TX]", /* GPIO_45 */ - "[BLSP3_UART_RX]", /* GPIO_46 */ - "[I2C0_SDA]", /* GPIO_47, LS_I2C0_SDA, LSEC pin 17 */ - "[I2C0_SCL]", /* GPIO_48, LS_I2C0_SCL, LSEC pin 15 */ - "[UART0_TxD]", /* GPIO_49, BLSP9_UART_TX, LSEC pin 5 */ - "[UART0_RxD]", /* GPIO_50, BLSP9_UART_RX, LSEC pin 7 */ - "[UART0_CTS]", /* GPIO_51, BLSP9_UART_CTS_N, LSEC pin 3 */ - "[UART0_RTS]", /* GPIO_52, BLSP9_UART_RFR_N, LSEC pin 9 */ - "[CODEC_INT1_N]", /* GPIO_53 */ - "[CODEC_INT2_N]", /* GPIO_54 */ - "[BLSP7_I2C_SDA]", /* GPIO_55 */ - "[BLSP7_I2C_SCL]", /* GPIO_56 */ - "MI2S_MCLK", /* GPIO_57, S HSEC pin 3 */ - "[PCM_CLK]", /* GPIO_58, QUA_MI2S_SCK, LSEC pin 18 */ - "[PCM_FS]", /* GPIO_59, QUA_MI2S_WS, LSEC pin 16 */ - "[PCM_DO]", /* GPIO_60, QUA_MI2S_DATA0, LSEC pin 20 */ - "[PCM_DI]", /* GPIO_61, QUA_MI2S_DATA1, LSEC pin 22 */ - "GPIO-E", /* GPIO_62, LSEC pin 27 */ - "TP87", /* GPIO_63 */ - "[CODEC_RST_N]", /* GPIO_64 */ - "[PCM1_CLK]", /* GPIO_65 */ - "[PCM1_SYNC]", /* GPIO_66 */ - "[PCM1_DIN]", /* GPIO_67 */ - "[PCM1_DOUT]", /* GPIO_68 */ - "AUDIO_REF_CLK", /* GPIO_69 */ - "SLIMBUS_CLK", /* GPIO_70 */ - "SLIMBUS_DATA0", /* GPIO_71 */ - "SLIMBUS_DATA1", /* GPIO_72 */ - "NC", /* GPIO_73 */ - "NC", /* GPIO_74 */ - "NC", /* GPIO_75 */ - "NC", /* GPIO_76 */ - "TP94", /* GPIO_77 */ - "NC", /* GPIO_78 */ - "TP95", /* GPIO_79 */ - "GPIO-A", /* GPIO_80, MEMS_RESET_N, LSEC pin 23 */ - "TP88", /* GPIO_81 */ - "TP89", /* GPIO_82 */ - "TP90", /* GPIO_83 */ - "TP91", /* GPIO_84 */ - "[SD_DAT0]", /* GPIO_85, BLSP12_SPI_MOSI, P HSEC pin 1 */ - "[SD_CMD]", /* GPIO_86, BLSP12_SPI_MISO, P HSEC pin 11 */ - "[SD_DAT3]", /* GPIO_87, BLSP12_SPI_CS_N, P HSEC pin 7 */ - "[SD_SCLK]", /* GPIO_88, BLSP12_SPI_CLK, P HSEC pin 9 */ - "TSIF1_CLK", /* GPIO_89, S HSEC pin 42 */ - "TSIF1_EN", /* GPIO_90, S HSEC pin 46 */ - "TSIF1_DATA", /* GPIO_91, S HSEC pin 44 */ - "NC", /* GPIO_92 */ - "TSIF2_CLK", /* GPIO_93, S HSEC pin 52 */ - "TSIF2_EN", /* GPIO_94, S HSEC pin 56 */ - "TSIF2_DATA", /* GPIO_95, S HSEC pin 54 */ - "TSIF2_SYNC", /* GPIO_96, S HSEC pin 58 */ - "NC", /* GPIO_97 */ - "CAM1_STANDBY_N", /* GPIO_98 */ - "NC", /* GPIO_99 */ - "NC", /* GPIO_100 */ - "[LCD1_RESET_N]", /* GPIO_101, S HSEC pin 51 */ - "BOOT_CONFIG1", /* GPIO_102 */ - "USB_HUB_RESET", /* GPIO_103 */ - "CAM1_RST_N", /* GPIO_104 */ - "NC", /* GPIO_105 */ - "NC", /* GPIO_106 */ - "NC", /* GPIO_107 */ - "NC", /* GPIO_108 */ - "NC", /* GPIO_109 */ - "NC", /* GPIO_110 */ - "NC", /* GPIO_111 */ - "NC", /* GPIO_112 */ - "PMI8994_BUA", /* GPIO_113 */ - "PCIE2_RST_N", /* GPIO_114 */ - "PCIE2_CLKREQ_N", /* GPIO_115 */ - "PCIE2_WAKE", /* GPIO_116 */ - "SSC_IRQ_0", /* GPIO_117 */ - "SSC_IRQ_1", /* GPIO_118 */ - "SSC_IRQ_2", /* GPIO_119 */ - "NC", /* GPIO_120 */ - "GPIO121", /* GPIO_121, S HSEC pin 2 */ - "NC", /* GPIO_122 */ - "SSC_IRQ_6", /* GPIO_123 */ - "SSC_IRQ_7", /* GPIO_124 */ - "GPIO-C", /* GPIO_125, TS_INT0, LSEC pin 25 */ - "BOOT_CONFIG5", /* GPIO_126 */ - "NC", /* GPIO_127 */ - "NC", /* GPIO_128 */ - "BOOT_CONFIG7", /* GPIO_129 */ - "PCIE1_RST_N", /* GPIO_130 */ - "PCIE1_CLKREQ_N", /* GPIO_131 */ - "PCIE1_WAKE", /* GPIO_132 */ - "GPIO-L", /* GPIO_133, CAM2_STANDBY_N, LSEC pin 34 */ - "NC", /* GPIO_134 */ - "NC", /* GPIO_135 */ - "BOOT_CONFIG8", /* GPIO_136 */ - "NC", /* GPIO_137 */ - "NC", /* GPIO_138 */ - "GPS_SSBI2", /* GPIO_139 */ - "GPS_SSBI1", /* GPIO_140 */ - "NC", /* GPIO_141 */ - "NC", /* GPIO_142 */ - "NC", /* GPIO_143 */ - "BOOT_CONFIG6", /* GPIO_144 */ - "NC", /* GPIO_145 */ - "NC", /* GPIO_146 */ - "NC", /* GPIO_147 */ - "NC", /* GPIO_148 */ - "NC"; /* GPIO_149 */ - }; - - qcom,spmi@400f000 { - pmic@0 { - gpios@c000 { - gpio-line-names = - "NC", - "KEY_VOLP_N", - "NC", - "BL1_PWM", - "GPIO-F", /* BL0_PWM, LSEC pin 28 */ - "BL1_EN", - "NC", - "WLAN_EN", - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", - "DIVCLK1", - "DIVCLK2", - "DIVCLK3", - "DIVCLK4", - "BT_EN", - "PMIC_SLB", - "PMIC_BUA", - "USB_VBUS_DET"; - }; - - mpps@a000 { - gpio-line-names = - "VDDPX_BIAS", - "WIFI_LED", - "NC", - "BT_LED", - "PM_MPP05", - "PM_MPP06", - "PM_MPP07", - "NC"; - }; - }; + usb2_id: usb2-id { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&pmi8994_gpios 6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb2_vbus_det_gpio>; + }; - pmic@2 { - gpios@c000 { - gpio-line-names = - "NC", - "SPKR_AMP_EN1", - "SPKR_AMP_EN2", - "TP61", - "NC", - "USB2_VBUS_DET", - "NC", - "NC", - "NC", - "NC"; - }; - }; - }; + usb3_id: usb3-id { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&pm8994_gpios 22 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb3_vbus_det_gpio>; + }; - phy@34000 { - status = "okay"; - }; + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-always-on; + regulator-boot-on; + + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + vreg_s8a_l3a_input: vreg-s8a-l3a-input { + compatible = "regulator-fixed"; + regulator-name = "vreg_s8a_l3a_input"; + regulator-always-on; + regulator-boot-on; + + regulator-min-microvolt = <0>; + regulator-max-microvolt = <0>; + }; + + wlan_en: wlan-en-1-8v { + pinctrl-names = "default"; + pinctrl-0 = <&wlan_en_gpios>; + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&pm8994_gpios 8 0>; + + /* WLAN card specific delay */ + startup-delay-us = <70000>; + enable-active-high; + }; +}; + +&blsp1_i2c2 { + /* On Low speed expansion */ + label = "LS-I2C0"; + status = "okay"; +}; + +&blsp1_spi0 { + /* On Low speed expansion */ + label = "LS-SPI0"; + status = "okay"; +}; + +&blsp1_uart1 { + label = "BT-UART"; + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_uart1_default>; + pinctrl-1 = <&blsp1_uart1_sleep>; + + bluetooth { + compatible = "qcom,qca6174-bt"; + + /* bt_disable_n gpio */ + enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>; + + clocks = <&divclk4>; + }; +}; + +&blsp2_i2c0 { + /* On High speed expansion */ + label = "HS-I2C2"; + status = "okay"; +}; + +&blsp2_i2c1 { + /* On Low speed expansion */ + label = "LS-I2C1"; + status = "okay"; +}; + +&blsp2_spi5 { + /* On High speed expansion */ + label = "HS-SPI1"; + status = "okay"; +}; + +&blsp2_uart1 { + label = "LS-UART1"; + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_uart1_2pins_default>; + pinctrl-1 = <&blsp2_uart1_2pins_sleep>; +}; + +&blsp2_uart2 { + label = "LS-UART0"; + status = "disabled"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_uart2_4pins_default>; + pinctrl-1 = <&blsp2_uart2_4pins_sleep>; +}; + +&camss { + vdda-supply = <&vreg_l2a_1p25>; +}; + +&hdmi { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>; + pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>; + + core-vdda-supply = <&vreg_l12a_1p8>; + core-vcc-supply = <&vreg_s4a_1p8>; +}; + +&hdmi_phy { + status = "okay"; + + vddio-supply = <&vreg_l12a_1p8>; + vcca-supply = <&vreg_l28a_0p925>; + #phy-cells = <0>; +}; + +&hsusb_phy1 { + status = "okay"; + + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; +}; + +&hsusb_phy2 { + status = "okay"; + + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; +}; + +&mdp { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; - phy@7410000 { - status = "okay"; +&msmgpio { + gpio-line-names = + "[SPI0_DOUT]", /* GPIO_0, BLSP1_SPI_MOSI, LSEC pin 14 */ + "[SPI0_DIN]", /* GPIO_1, BLSP1_SPI_MISO, LSEC pin 10 */ + "[SPI0_CS]", /* GPIO_2, BLSP1_SPI_CS_N, LSEC pin 12 */ + "[SPI0_SCLK]", /* GPIO_3, BLSP1_SPI_CLK, LSEC pin 8 */ + "[UART1_TxD]", /* GPIO_4, BLSP8_UART_TX, LSEC pin 11 */ + "[UART1_RxD]", /* GPIO_5, BLSP8_UART_RX, LSEC pin 13 */ + "[I2C1_SDA]", /* GPIO_6, BLSP8_I2C_SDA, LSEC pin 21 */ + "[I2C1_SCL]", /* GPIO_7, BLSP8_I2C_SCL, LSEC pin 19 */ + "GPIO-H", /* GPIO_8, LCD0_RESET_N, LSEC pin 30 */ + "TP93", /* GPIO_9 */ + "GPIO-G", /* GPIO_10, MDP_VSYNC_P, LSEC pin 29 */ + "[MDP_VSYNC_S]", /* GPIO_11, S HSEC pin 55 */ + "NC", /* GPIO_12 */ + "[CSI0_MCLK]", /* GPIO_13, CAM_MCLK0, P HSEC pin 15 */ + "[CAM_MCLK1]", /* GPIO_14, J14 pin 11 */ + "[CSI1_MCLK]", /* GPIO_15, CAM_MCLK2, P HSEC pin 17 */ + "TP99", /* GPIO_16 */ + "[I2C2_SDA]", /* GPIO_17, CCI_I2C_SDA0, P HSEC pin 34 */ + "[I2C2_SCL]", /* GPIO_18, CCI_I2C_SCL0, P HSEC pin 32 */ + "[CCI_I2C_SDA1]", /* GPIO_19, S HSEC pin 38 */ + "[CCI_I2C_SCL1]", /* GPIO_20, S HSEC pin 36 */ + "FLASH_STROBE_EN", /* GPIO_21, S HSEC pin 5 */ + "FLASH_STROBE_TRIG", /* GPIO_22, S HSEC pin 1 */ + "GPIO-K", /* GPIO_23, CAM2_RST_N, LSEC pin 33 */ + "GPIO-D", /* GPIO_24, LSEC pin 26 */ + "GPIO-I", /* GPIO_25, CAM0_RST_N, LSEC pin 31 */ + "GPIO-J", /* GPIO_26, CAM0_STANDBY_N, LSEC pin 32 */ + "BLSP6_I2C_SDA", /* GPIO_27 */ + "BLSP6_I2C_SCL", /* GPIO_28 */ + "GPIO-B", /* GPIO_29, TS0_RESET_N, LSEC pin 24 */ + "GPIO30", /* GPIO_30, S HSEC pin 4 */ + "HDMI_CEC", /* GPIO_31 */ + "HDMI_DDC_CLOCK", /* GPIO_32 */ + "HDMI_DDC_DATA", /* GPIO_33 */ + "HDMI_HOT_PLUG_DETECT", /* GPIO_34 */ + "PCIE0_RST_N", /* GPIO_35 */ + "PCIE0_CLKREQ_N", /* GPIO_36 */ + "PCIE0_WAKE", /* GPIO_37 */ + "SD_CARD_DET_N", /* GPIO_38 */ + "TSIF1_SYNC", /* GPIO_39, S HSEC pin 48 */ + "W_DISABLE_N", /* GPIO_40 */ + "[BLSP9_UART_TX]", /* GPIO_41 */ + "[BLSP9_UART_RX]", /* GPIO_42 */ + "[BLSP2_UART_CTS_N]", /* GPIO_43 */ + "[BLSP2_UART_RFR_N]", /* GPIO_44 */ + "[BLSP3_UART_TX]", /* GPIO_45 */ + "[BLSP3_UART_RX]", /* GPIO_46 */ + "[I2C0_SDA]", /* GPIO_47, LS_I2C0_SDA, LSEC pin 17 */ + "[I2C0_SCL]", /* GPIO_48, LS_I2C0_SCL, LSEC pin 15 */ + "[UART0_TxD]", /* GPIO_49, BLSP9_UART_TX, LSEC pin 5 */ + "[UART0_RxD]", /* GPIO_50, BLSP9_UART_RX, LSEC pin 7 */ + "[UART0_CTS]", /* GPIO_51, BLSP9_UART_CTS_N, LSEC pin 3 */ + "[UART0_RTS]", /* GPIO_52, BLSP9_UART_RFR_N, LSEC pin 9 */ + "[CODEC_INT1_N]", /* GPIO_53 */ + "[CODEC_INT2_N]", /* GPIO_54 */ + "[BLSP7_I2C_SDA]", /* GPIO_55 */ + "[BLSP7_I2C_SCL]", /* GPIO_56 */ + "MI2S_MCLK", /* GPIO_57, S HSEC pin 3 */ + "[PCM_CLK]", /* GPIO_58, QUA_MI2S_SCK, LSEC pin 18 */ + "[PCM_FS]", /* GPIO_59, QUA_MI2S_WS, LSEC pin 16 */ + "[PCM_DO]", /* GPIO_60, QUA_MI2S_DATA0, LSEC pin 20 */ + "[PCM_DI]", /* GPIO_61, QUA_MI2S_DATA1, LSEC pin 22 */ + "GPIO-E", /* GPIO_62, LSEC pin 27 */ + "TP87", /* GPIO_63 */ + "[CODEC_RST_N]", /* GPIO_64 */ + "[PCM1_CLK]", /* GPIO_65 */ + "[PCM1_SYNC]", /* GPIO_66 */ + "[PCM1_DIN]", /* GPIO_67 */ + "[PCM1_DOUT]", /* GPIO_68 */ + "AUDIO_REF_CLK", /* GPIO_69 */ + "SLIMBUS_CLK", /* GPIO_70 */ + "SLIMBUS_DATA0", /* GPIO_71 */ + "SLIMBUS_DATA1", /* GPIO_72 */ + "NC", /* GPIO_73 */ + "NC", /* GPIO_74 */ + "NC", /* GPIO_75 */ + "NC", /* GPIO_76 */ + "TP94", /* GPIO_77 */ + "NC", /* GPIO_78 */ + "TP95", /* GPIO_79 */ + "GPIO-A", /* GPIO_80, MEMS_RESET_N, LSEC pin 23 */ + "TP88", /* GPIO_81 */ + "TP89", /* GPIO_82 */ + "TP90", /* GPIO_83 */ + "TP91", /* GPIO_84 */ + "[SD_DAT0]", /* GPIO_85, BLSP12_SPI_MOSI, P HSEC pin 1 */ + "[SD_CMD]", /* GPIO_86, BLSP12_SPI_MISO, P HSEC pin 11 */ + "[SD_DAT3]", /* GPIO_87, BLSP12_SPI_CS_N, P HSEC pin 7 */ + "[SD_SCLK]", /* GPIO_88, BLSP12_SPI_CLK, P HSEC pin 9 */ + "TSIF1_CLK", /* GPIO_89, S HSEC pin 42 */ + "TSIF1_EN", /* GPIO_90, S HSEC pin 46 */ + "TSIF1_DATA", /* GPIO_91, S HSEC pin 44 */ + "NC", /* GPIO_92 */ + "TSIF2_CLK", /* GPIO_93, S HSEC pin 52 */ + "TSIF2_EN", /* GPIO_94, S HSEC pin 56 */ + "TSIF2_DATA", /* GPIO_95, S HSEC pin 54 */ + "TSIF2_SYNC", /* GPIO_96, S HSEC pin 58 */ + "NC", /* GPIO_97 */ + "CAM1_STANDBY_N", /* GPIO_98 */ + "NC", /* GPIO_99 */ + "NC", /* GPIO_100 */ + "[LCD1_RESET_N]", /* GPIO_101, S HSEC pin 51 */ + "BOOT_CONFIG1", /* GPIO_102 */ + "USB_HUB_RESET", /* GPIO_103 */ + "CAM1_RST_N", /* GPIO_104 */ + "NC", /* GPIO_105 */ + "NC", /* GPIO_106 */ + "NC", /* GPIO_107 */ + "NC", /* GPIO_108 */ + "NC", /* GPIO_109 */ + "NC", /* GPIO_110 */ + "NC", /* GPIO_111 */ + "NC", /* GPIO_112 */ + "PMI8994_BUA", /* GPIO_113 */ + "PCIE2_RST_N", /* GPIO_114 */ + "PCIE2_CLKREQ_N", /* GPIO_115 */ + "PCIE2_WAKE", /* GPIO_116 */ + "SSC_IRQ_0", /* GPIO_117 */ + "SSC_IRQ_1", /* GPIO_118 */ + "SSC_IRQ_2", /* GPIO_119 */ + "NC", /* GPIO_120 */ + "GPIO121", /* GPIO_121, S HSEC pin 2 */ + "NC", /* GPIO_122 */ + "SSC_IRQ_6", /* GPIO_123 */ + "SSC_IRQ_7", /* GPIO_124 */ + "GPIO-C", /* GPIO_125, TS_INT0, LSEC pin 25 */ + "BOOT_CONFIG5", /* GPIO_126 */ + "NC", /* GPIO_127 */ + "NC", /* GPIO_128 */ + "BOOT_CONFIG7", /* GPIO_129 */ + "PCIE1_RST_N", /* GPIO_130 */ + "PCIE1_CLKREQ_N", /* GPIO_131 */ + "PCIE1_WAKE", /* GPIO_132 */ + "GPIO-L", /* GPIO_133, CAM2_STANDBY_N, LSEC pin 34 */ + "NC", /* GPIO_134 */ + "NC", /* GPIO_135 */ + "BOOT_CONFIG8", /* GPIO_136 */ + "NC", /* GPIO_137 */ + "NC", /* GPIO_138 */ + "GPS_SSBI2", /* GPIO_139 */ + "GPS_SSBI1", /* GPIO_140 */ + "NC", /* GPIO_141 */ + "NC", /* GPIO_142 */ + "NC", /* GPIO_143 */ + "BOOT_CONFIG6", /* GPIO_144 */ + "NC", /* GPIO_145 */ + "NC", /* GPIO_146 */ + "NC", /* GPIO_147 */ + "NC", /* GPIO_148 */ + "NC"; /* GPIO_149 */ + + sdc2_cd_on: sdc2_cd_on { + mux { + pins = "gpio38"; + function = "gpio"; }; - phy@7411000 { - status = "okay"; + config { + pins = "gpio38"; + bias-pull-up; /* pull up */ + drive-strength = <16>; /* 16 MA */ }; + }; - phy@7412000 { - status = "okay"; + sdc2_cd_off: sdc2_cd_off { + mux { + pins = "gpio38"; + function = "gpio"; }; - usb@6af8800 { - status = "okay"; - extcon = <&usb3_id>; + config { + pins = "gpio38"; + bias-pull-up; /* pull up */ + drive-strength = <2>; /* 2 MA */ + }; + }; - dwc3@6a00000 { - extcon = <&usb3_id>; - dr_mode = "otg"; - }; + blsp1_uart1_default: blsp1_uart1_default { + mux { + pins = "gpio41", "gpio42", "gpio43", "gpio44"; + function = "blsp_uart2"; }; - usb3_id: usb3-id { - compatible = "linux,extcon-usb-gpio"; - id-gpio = <&pm8994_gpios 22 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&usb3_vbus_det_gpio>; + config { + pins = "gpio41", "gpio42", "gpio43", "gpio44"; + drive-strength = <16>; + bias-disable; }; + }; - usb@76f8800 { - status = "okay"; - extcon = <&usb2_id>; + blsp1_uart1_sleep: blsp1_uart1_sleep { + mux { + pins = "gpio41", "gpio42", "gpio43", "gpio44"; + function = "gpio"; + }; - dwc3@7600000 { - extcon = <&usb2_id>; - dr_mode = "otg"; - maximum-speed = "high-speed"; - }; + config { + pins = "gpio41", "gpio42", "gpio43", "gpio44"; + drive-strength = <2>; + bias-disable; }; + }; - usb2_id: usb2-id { - compatible = "linux,extcon-usb-gpio"; - id-gpio = <&pmi8994_gpios 6 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&usb2_vbus_det_gpio>; + hdmi_hpd_active: hdmi_hpd_active { + mux { + pins = "gpio34"; + function = "hdmi_hot"; }; - wlan_en: wlan-en-1-8v { - pinctrl-names = "default"; - pinctrl-0 = <&wlan_en_gpios>; - compatible = "regulator-fixed"; - regulator-name = "wlan-en-regulator"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + config { + pins = "gpio34"; + bias-pull-down; + drive-strength = <16>; + }; + }; - gpio = <&pm8994_gpios 8 0>; + hdmi_hpd_suspend: hdmi_hpd_suspend { + mux { + pins = "gpio34"; + function = "hdmi_hot"; + }; - /* WLAN card specific delay */ - startup-delay-us = <70000>; - enable-active-high; + config { + pins = "gpio34"; + bias-pull-down; + drive-strength = <2>; }; + }; - agnoc@0 { - pcie@600000 { - status = "okay"; - perst-gpio = <&msmgpio 35 GPIO_ACTIVE_LOW>; - vddpe-3v3-supply = <&wlan_en>; - }; + hdmi_ddc_active: hdmi_ddc_active { + mux { + pins = "gpio32", "gpio33"; + function = "hdmi_ddc"; + }; - pcie@608000 { - status = "okay"; - perst-gpio = <&msmgpio 130 GPIO_ACTIVE_LOW>; - }; + config { + pins = "gpio32", "gpio33"; + drive-strength = <2>; + bias-pull-up; + }; + }; - pcie@610000 { - status = "okay"; - perst-gpio = <&msmgpio 114 GPIO_ACTIVE_LOW>; - }; + hdmi_ddc_suspend: hdmi_ddc_suspend { + mux { + pins = "gpio32", "gpio33"; + function = "hdmi_ddc"; }; - slim_msm: slim@91c0000 { - ngd@1 { - wcd9335: codec@1{ - clock-names = "mclk", "slimbus"; - clocks = <&div1_mclk>, - <&rpmcc RPM_SMD_BB_CLK1>; - }; - }; + config { + pins = "gpio32", "gpio33"; + drive-strength = <2>; + bias-pull-down; }; + }; +}; - mdss@900000 { - status = "okay"; +&pcie0 { + status = "okay"; + perst-gpio = <&msmgpio 35 GPIO_ACTIVE_LOW>; + vddpe-3v3-supply = <&wlan_en>; + vdda-supply = <&vreg_l28a_0p925>; +}; - mdp@901000 { - status = "okay"; - }; +&pcie1 { + status = "okay"; + perst-gpio = <&msmgpio 130 GPIO_ACTIVE_LOW>; + vdda-supply = <&vreg_l28a_0p925>; +}; - hdmi-phy@9a0600 { - status = "okay"; +&pcie2 { + status = "okay"; + perst-gpio = <&msmgpio 114 GPIO_ACTIVE_LOW>; + vdda-supply = <&vreg_l28a_0p925>; +}; - vddio-supply = <&pm8994_l12>; - vcca-supply = <&pm8994_l28>; - #phy-cells = <0>; - }; +&pcie_phy { + status = "okay"; - hdmi-tx@9a0000 { - status = "okay"; + vdda-phy-supply = <&vreg_l28a_0p925>; + vdda-pll-supply = <&vreg_l12a_1p8>; +}; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>; - pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>; +&pm8994_gpios { + gpio-line-names = + "NC", + "KEY_VOLP_N", + "NC", + "BL1_PWM", + "GPIO-F", /* BL0_PWM, LSEC pin 28 */ + "BL1_EN", + "NC", + "WLAN_EN", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "DIVCLK1", + "DIVCLK2", + "DIVCLK3", + "DIVCLK4", + "BT_EN", + "PMIC_SLB", + "PMIC_BUA", + "USB_VBUS_DET"; + + pinctrl-names = "default"; + pinctrl-0 = <&ls_exp_gpio_f &bt_en_gpios>; + + ls_exp_gpio_f: pm8994_gpio5 { + pinconf { + pins = "gpio5"; + output-low; + power-source = <2>; // PM8994_GPIO_S4, 1.8V + }; + }; - core-vdda-supply = <&pm8994_l12>; - core-vcc-supply = <&pm8994_s4>; - }; + bt_en_gpios: bt_en_gpios { + pinconf { + pins = "gpio19"; + function = PMIC_GPIO_FUNC_NORMAL; + output-low; + power-source = <PM8994_GPIO_S4>; // 1.8V + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + bias-pull-down; }; }; + wlan_en_gpios: wlan_en_gpios { + pinconf { + pins = "gpio8"; + function = PMIC_GPIO_FUNC_NORMAL; + output-low; + power-source = <PM8994_GPIO_S4>; // 1.8V + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + bias-pull-down; + }; + }; - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - autorepeat; + audio_mclk: clk_div1 { + pinconf { + pins = "gpio15"; + function = "func1"; + power-source = <PM8994_GPIO_S4>; // 1.8V + }; + }; - pinctrl-names = "default"; - pinctrl-0 = <&volume_up_gpio>; + volume_up_gpio: pm8996_gpio2 { + pinconf { + pins = "gpio2"; + function = "normal"; + input-enable; + drive-push-pull; + bias-pull-up; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + power-source = <PM8994_GPIO_S4>; // 1.8V + }; + }; - button@0 { - label = "Volume Up"; - linux,code = <KEY_VOLUMEUP>; - gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>; + divclk4_pin_a: divclk4 { + pinconf { + pins = "gpio18"; + function = PMIC_GPIO_FUNC_FUNC2; + + bias-disable; + power-source = <PM8994_GPIO_S4>; }; }; - rpm-glink { - rpm_requests { - pm8994-regulators { - vdd_l1-supply = <&pm8994_s3>; - vdd_l2_l26_l28-supply = <&pm8994_s3>; - vdd_l3_l11-supply = <&pm8994_s3>; - vdd_l4_l27_l31-supply = <&pm8994_s3>; - vdd_l5_l7-supply = <&pm8994_s5>; - vdd_l14_l15-supply = <&pm8994_s5>; - vdd_l20_l21-supply = <&pm8994_s5>; - vdd_l25-supply = <&pm8994_s3>; - - s3 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - }; - - /** - * 1.8v required on LS expansion - * for mezzanine boards - */ - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - s5 { - regulator-min-microvolt = <2150000>; - regulator-max-microvolt = <2150000>; - }; - s7 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <800000>; - }; - - l1 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - }; - l2 { - regulator-min-microvolt = <1250000>; - regulator-max-microvolt = <1250000>; - }; - l3 { - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <850000>; - }; - l4 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - l6 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - l8 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - l9 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - l10 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - l11 { - regulator-min-microvolt = <1150000>; - regulator-max-microvolt = <1150000>; - }; - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - l13 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - l16 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - l17 { - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - }; - l18 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2900000>; - }; - l19 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - l20 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - regulator-allow-set-load; - }; - l21 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - regulator-allow-set-load; - regulator-system-load = <200000>; - }; - l22 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - l23 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - l24 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - l25 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-allow-set-load; - }; - l27 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - }; - l28 { - regulator-min-microvolt = <925000>; - regulator-max-microvolt = <925000>; - regulator-allow-set-load; - }; - l29 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - l30 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - l32 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - }; + usb3_vbus_det_gpio: pm8996_gpio22 { + pinconf { + pins = "gpio22"; + function = PMIC_GPIO_FUNC_NORMAL; + input-enable; + bias-pull-down; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + power-source = <PM8994_GPIO_S4>; // 1.8V }; }; }; -&spmi_bus { - pmic@0 { - pon@800 { - resin { - compatible = "qcom,pm8941-resin"; - interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; - debounce = <15625>; - bias-pull-up; - linux,code = <KEY_VOLUMEDOWN>; - }; +&pm8994_mpps { + gpio-line-names = + "VDDPX_BIAS", + "WIFI_LED", + "NC", + "BT_LED", + "PM_MPP05", + "PM_MPP06", + "PM_MPP07", + "NC"; +}; + +&pm8994_spmi_regulators { + qcom,saw-reg = <&saw3>; + s9 { + qcom,saw-slave; + }; + s10 { + qcom,saw-slave; + }; + s11 { + qcom,saw-leader; + regulator-always-on; + regulator-min-microvolt = <1230000>; + regulator-max-microvolt = <1230000>; + }; +}; + +&pmi8994_gpios { + gpio-line-names = + "NC", + "SPKR_AMP_EN1", + "SPKR_AMP_EN2", + "TP61", + "NC", + "USB2_VBUS_DET", + "NC", + "NC", + "NC", + "NC"; + + usb2_vbus_det_gpio: pmi8996_gpio6 { + pinconf { + pins = "gpio6"; + function = PMIC_GPIO_FUNC_NORMAL; + input-enable; + bias-pull-down; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + power-source = <PM8994_GPIO_S4>; // 1.8V }; }; }; +&rpm_requests { + pm8994-regulators { + compatible = "qcom,rpm-pm8994-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_s8-supply = <&vph_pwr>; + vdd_s9-supply = <&vph_pwr>; + vdd_s10-supply = <&vph_pwr>; + vdd_s11-supply = <&vph_pwr>; + vdd_s12-supply = <&vph_pwr>; + vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>; + vdd_l3_l11-supply = <&vreg_s8a_l3a_input>; + vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>; + vdd_l5_l7-supply = <&vreg_s5a_2p15>; + vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>; + vdd_l8_l16_l30-supply = <&vph_pwr>; + vdd_l14_l15-supply = <&vreg_s5a_2p15>; + vdd_l25-supply = <&vreg_s3a_1p3>; + vdd_lvs1_2-supply = <&vreg_s4a_1p8>; + + vreg_s3a_1p3: s3 { + regulator-name = "vreg_s3a_1p3"; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + /** + * 1.8v required on LS expansion + * for mezzanine boards + */ + vreg_s4a_1p8: s4 { + regulator-name = "vreg_s4a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + vreg_s5a_2p15: s5 { + regulator-name = "vreg_s5a_2p15"; + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + }; + vreg_s7a_1p0: s7 { + regulator-name = "vreg_s7a_1p0"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + vreg_l1a_1p0: l1 { + regulator-name = "vreg_l1a_1p0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + vreg_l2a_1p25: l2 { + regulator-name = "vreg_l2a_1p25"; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + }; + vreg_l3a_0p875: l3 { + regulator-name = "vreg_l3a_0p875"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + }; + vreg_l4a_1p225: l4 { + regulator-name = "vreg_l4a_1p225"; + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + vreg_l6a_1p2: l6 { + regulator-name = "vreg_l6a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + vreg_l8a_1p8: l8 { + regulator-name = "vreg_l8a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l9a_1p8: l9 { + regulator-name = "vreg_l9a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l10a_1p8: l10 { + regulator-name = "vreg_l10a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l11a_1p15: l11 { + regulator-name = "vreg_l11a_1p15"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + }; + vreg_l12a_1p8: l12 { + regulator-name = "vreg_l12a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l13a_2p95: l13 { + regulator-name = "vreg_l13a_2p95"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + vreg_l14a_1p8: l14 { + regulator-name = "vreg_l14a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l15a_1p8: l15 { + regulator-name = "vreg_l15a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l16a_2p7: l16 { + regulator-name = "vreg_l16a_2p7"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + vreg_l17a_2p8: l17 { + regulator-name = "vreg_l17a_2p8"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + vreg_l18a_2p85: l18 { + regulator-name = "vreg_l18a_2p85"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2900000>; + }; + vreg_l19a_2p8: l19 { + regulator-name = "vreg_l19a_2p8"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + vreg_l20a_2p95: l20 { + regulator-name = "vreg_l20a_2p95"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + vreg_l21a_2p95: l21 { + regulator-name = "vreg_l21a_2p95"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + vreg_l22a_3p0: l22 { + regulator-name = "vreg_l22a_3p0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + vreg_l23a_2p8: l23 { + regulator-name = "vreg_l23a_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + vreg_l24a_3p075: l24 { + regulator-name = "vreg_l24a_3p075"; + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + vreg_l25a_1p2: l25 { + regulator-name = "vreg_l25a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-allow-set-load; + }; + vreg_l26a_0p8: l27 { + regulator-name = "vreg_l26a_0p8"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + vreg_l28a_0p925: l28 { + regulator-name = "vreg_l28a_0p925"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <925000>; + regulator-allow-set-load; + }; + vreg_l29a_2p8: l29 { + regulator-name = "vreg_l29a_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + vreg_l30a_1p8: l30 { + regulator-name = "vreg_l30a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l32a_1p8: l32 { + regulator-name = "vreg_l32a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_lvs1a_1p8: lvs1 { + regulator-name = "vreg_lvs1a_1p8"; + }; + + vreg_lvs2a_1p8: lvs2 { + regulator-name = "vreg_lvs2a_1p8"; + }; + }; +}; + +&sdhc2 { + /* External SD card */ + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + cd-gpios = <&msmgpio 38 0x1>; + vmmc-supply = <&vreg_l21a_2p95>; + vqmmc-supply = <&vreg_l13a_2p95>; + status = "okay"; +}; + &sound { compatible = "qcom,apq8096-sndcard"; model = "DB820c"; @@ -754,3 +979,84 @@ }; }; }; + +&spmi_bus { + pmic@0 { + pon@800 { + resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_VOLUMEDOWN>; + }; + }; + }; +}; + +&ufsphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l28a_0p925>; + vdda-pll-supply = <&vreg_l12a_1p8>; + + vdda-phy-max-microamp = <18380>; + vdda-pll-max-microamp = <9440>; + + vddp-ref-clk-supply = <&vreg_l25a_1p2>; + vddp-ref-clk-max-microamp = <100>; + vddp-ref-clk-always-on; +}; + +&ufshc { + status = "okay"; + + vcc-supply = <&vreg_l20a_2p95>; + vccq-supply = <&vreg_l25a_1p2>; + vccq2-supply = <&vreg_s4a_1p8>; + + vcc-max-microamp = <600000>; + vccq-max-microamp = <450000>; + vccq2-max-microamp = <450000>; +}; + +&usb2 { + status = "okay"; + extcon = <&usb2_id>; + + dwc3@7600000 { + extcon = <&usb2_id>; + dr_mode = "otg"; + maximum-speed = "high-speed"; + }; +}; + +&usb3 { + status = "okay"; + extcon = <&usb3_id>; + + dwc3@6a00000 { + extcon = <&usb3_id>; + dr_mode = "otg"; + }; +}; + +&usb3phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l28a_0p925>; + vdda-pll-supply = <&vreg_l12a_1p8>; + +}; + +&wcd9335 { + clock-names = "mclk", "slimbus"; + clocks = <&div1_mclk>, + <&rpmcc RPM_SMD_BB_CLK1>; + + vdd-buck-supply = <&vreg_s4a_1p8>; + vdd-buck-sido-supply = <&vreg_s4a_1p8>; + vdd-tx-supply = <&vreg_s4a_1p8>; + vdd-rx-supply = <&vreg_s4a_1p8>; + vdd-io-supply = <&vreg_s4a_1p8>; +}; diff --git a/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts b/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts new file mode 100644 index 000000000000..f6ddf17ada81 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts @@ -0,0 +1,385 @@ +// SPDX-License-Identifier: BSD-3-Clause + +/dts-v1/; + +#include "msm8996.dtsi" +#include "pm8994.dtsi" +#include "pmi8994.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> + +/ { + model = "Inforce 6640 Single Board Computer"; + compatible = "inforce,ifc6640", "qcom,apq8096-sbc", "qcom,apq8096"; + + qcom,msm-id = <291 0x00030001>; + qcom,board-id = <0x00010018 0>; + + aliases { + serial0 = &blsp2_uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + v1p05: v1p05-regulator { + compatible = "regulator-fixed"; + reglator-name = "v1p05"; + regulator-always-on; + regulator-boot-on; + + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + + vin-supply = <&v5p0>; + }; + + v12_poe: v12-poe-regulator { + compatible = "regulator-fixed"; + reglator-name = "v12_poe"; + regulator-always-on; + regulator-boot-on; + + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + v3p3: v3p3-regulator { + compatible = "regulator-fixed"; + regulator-name = "v3p3"; + regulator-always-on; + regulator-boot-on; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + vin-supply = <&v12_poe>; + }; + + v5p0: v5p0-regulator { + compatible = "regulator-fixed"; + regulator-name = "v5p0"; + regulator-always-on; + regulator-boot-on; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + vin-supply = <&v12_poe>; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-always-on; + regulator-boot-on; + + regulator-min-microvolt = <3800000>; + regulator-max-microvolt = <3800000>; + }; +}; + +&blsp2_uart1 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_uart1_2pins_default>; + pinctrl-1 = <&blsp2_uart1_2pins_sleep>; +}; + +&msmgpio { + sdc2_pins_default: sdc2-pins-default { + clk { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + + cd { + pins = "gpio38"; + function = "gpio"; + + bias-pull-up; + drive-strength = <16>; + }; + }; + + sdc2_pins_sleep: sdc2-pins-sleep { + clk { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; + + cd { + pins = "gpio38"; + function = "gpio"; + bias-pull-up; + drive-strength = <2>; + }; + }; +}; + +&rpm_requests { + pm8994-regulators { + compatible = "qcom,rpm-pm8994-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_s8-supply = <&vph_pwr>; + vdd_s9-supply = <&vph_pwr>; + vdd_s10-supply = <&vph_pwr>; + vdd_s11-supply = <&vph_pwr>; + vdd_s12-supply = <&vph_pwr>; + vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>; + vdd_l3_l11-supply = <&vreg_s3a_1p3>; + vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>; + vdd_l5_l7-supply = <&vreg_s5a_2p15>; + vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>; + vdd_l8_l16_l30-supply = <&vph_pwr>; + vdd_l25-supply = <&vreg_s3a_1p3>; + vdd_lvs1_2-supply = <&vreg_s4a_1p8>; + + vreg_s3a_1p3: s3 { + regulator-name = "vreg_s3a_1p3"; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + vreg_s4a_1p8: s4 { + regulator-name = "vreg_s4a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + vreg_s5a_2p15: s5 { + regulator-name = "vreg_s5a_2p15"; + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + }; + vreg_s7a_1p0: s7 { + regulator-name = "vreg_s7a_1p0"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + vreg_l1a_1p0: l1 { + regulator-name = "vreg_l1a_1p0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + vreg_l2a_1p25: l2 { + regulator-name = "vreg_l2a_1p25"; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + }; + vreg_l3a_0p875: l3 { + regulator-name = "vreg_l3a_0p875"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + }; + vreg_l4a_1p225: l4 { + regulator-name = "vreg_l4a_1p225"; + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + vreg_l6a_1p2: l6 { + regulator-name = "vreg_l6a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + vreg_l8a_1p8: l8 { + regulator-name = "vreg_l8a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l9a_1p8: l9 { + regulator-name = "vreg_l9a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l10a_1p8: l10 { + regulator-name = "vreg_l10a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l11a_1p15: l11 { + regulator-name = "vreg_l11a_1p15"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + }; + vreg_l12a_1p8: l12 { + regulator-name = "vreg_l12a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l13a_2p95: l13 { + regulator-name = "vreg_l13a_2p95"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + vreg_l14a_1p8: l14 { + regulator-name = "vreg_l14a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l15a_1p8: l15 { + regulator-name = "vreg_l15a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l16a_2p7: l16 { + regulator-name = "vreg_l16a_2p7"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + vreg_l17a_2p8: l17 { + regulator-name = "vreg_l17a_2p8"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + vreg_l18a_2p85: l18 { + regulator-name = "vreg_l18a_2p85"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2900000>; + }; + vreg_l19a_2p8: l19 { + regulator-name = "vreg_l19a_2p8"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + vreg_l20a_2p95: l20 { + regulator-name = "vreg_l20a_2p95"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + vreg_l21a_2p95: l21 { + regulator-name = "vreg_l21a_2p95"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + vreg_l22a_3p0: l22 { + regulator-name = "vreg_l22a_3p0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + vreg_l23a_2p8: l23 { + regulator-name = "vreg_l23a_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + vreg_l24a_3p075: l24 { + regulator-name = "vreg_l24a_3p075"; + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + vreg_l25a_1p2: l25 { + regulator-name = "vreg_l25a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-allow-set-load; + }; + vreg_l26a_0p8: l27 { + regulator-name = "vreg_l26a_0p8"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + vreg_l28a_0p925: l28 { + regulator-name = "vreg_l28a_0p925"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <925000>; + regulator-allow-set-load; + }; + vreg_l29a_2p8: l29 { + regulator-name = "vreg_l29a_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + vreg_l30a_1p8: l30 { + regulator-name = "vreg_l30a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l32a_1p8: l32 { + regulator-name = "vreg_l32a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_lvs1a_1p8: lvs1 { + regulator-name = "vreg_lvs1a_1p8"; + }; + + vreg_lvs2a_1p8: lvs2 { + regulator-name = "vreg_lvs2a_1p8"; + }; + }; +}; + +&sdhc2 { + status = "okay"; + + bus-width = <4>; + + cd-gpios = <&msmgpio 38 0x1>; + + vmmc-supply = <&vreg_l21a_2p95>; + vqmmc-supply = <&vreg_l13a_2p95>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_pins_default>; + pinctrl-1 = <&sdc2_pins_sleep>; +}; + +&ufshc { + status = "okay"; + + vcc-supply = <&vreg_l20a_2p95>; + vccq-supply = <&vreg_l25a_1p2>; + vccq2-supply = <&vreg_s4a_1p8>; + + vcc-max-microamp = <600000>; + vccq-max-microamp = <450000>; + vccq2-max-microamp = <450000>; +}; + +&ufsphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l28a_0p925>; + vdda-pll-supply = <&vreg_l12a_1p8>; + + vdda-phy-max-microamp = <18380>; + vdda-pll-max-microamp = <9440>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 8686e101905c..9f31064f2374 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -102,10 +102,11 @@ reg = <0x0>; next-level-cache = <&L2_0>; enable-method = "psci"; - cpu-idle-states = <&CPU_SLEEP_0>; clocks = <&apcs>; operating-points-v2 = <&cpu_opp_table>; #cooling-cells = <2>; + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; }; CPU1: cpu@1 { @@ -114,10 +115,11 @@ reg = <0x1>; next-level-cache = <&L2_0>; enable-method = "psci"; - cpu-idle-states = <&CPU_SLEEP_0>; clocks = <&apcs>; operating-points-v2 = <&cpu_opp_table>; #cooling-cells = <2>; + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; }; CPU2: cpu@2 { @@ -126,10 +128,11 @@ reg = <0x2>; next-level-cache = <&L2_0>; enable-method = "psci"; - cpu-idle-states = <&CPU_SLEEP_0>; clocks = <&apcs>; operating-points-v2 = <&cpu_opp_table>; #cooling-cells = <2>; + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; }; CPU3: cpu@3 { @@ -138,10 +141,11 @@ reg = <0x3>; next-level-cache = <&L2_0>; enable-method = "psci"; - cpu-idle-states = <&CPU_SLEEP_0>; clocks = <&apcs>; operating-points-v2 = <&cpu_opp_table>; #cooling-cells = <2>; + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; }; L2_0: l2-cache { @@ -161,12 +165,57 @@ min-residency-us = <2000>; local-timer-stop; }; + + CLUSTER_RET: cluster-retention { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x41000012>; + entry-latency-us = <500>; + exit-latency-us = <500>; + min-residency-us = <2000>; + }; + + CLUSTER_PWRDN: cluster-gdhs { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x41000032>; + entry-latency-us = <2000>; + exit-latency-us = <2000>; + min-residency-us = <6000>; + }; }; }; psci { compatible = "arm,psci-1.0"; method = "smc"; + + CPU_PD0: cpu-pd0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&CPU_SLEEP_0>; + }; + + CPU_PD1: cpu-pd1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&CPU_SLEEP_0>; + }; + + CPU_PD2: cpu-pd2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&CPU_SLEEP_0>; + }; + + CPU_PD3: cpu-pd3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&CPU_SLEEP_0>; + }; + + CLUSTER_PD: cluster-pd { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_RET>, <&CLUSTER_PWRDN>; + }; }; pmu { @@ -429,7 +478,8 @@ compatible = "qcom,msm8916-apcs-kpss-global", "syscon"; reg = <0xb011000 0x1000>; #mbox-cells = <1>; - clocks = <&a53pll>; + clocks = <&a53pll>, <&gcc GPLL0_VOTE>; + clock-names = "pll", "aux"; #clock-cells = <0>; }; @@ -816,6 +866,8 @@ nvmem-cells = <&tsens_caldata>, <&tsens_calsel>; nvmem-cell-names = "calib", "calib_sel"; #qcom,sensors = <5>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow"; #thermal-sensor-cells = <1>; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 4ca2e7b44559..7ae082ea14ea 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -16,72 +16,19 @@ chosen { }; - memory { - device_type = "memory"; - /* We expect the bootloader to fill in the reg */ - reg = <0 0 0 0>; - }; - - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - mba_region: mba@91500000 { - reg = <0x0 0x91500000 0x0 0x200000>; - no-map; - }; - - slpi_region: slpi@90b00000 { - reg = <0x0 0x90b00000 0x0 0xa00000>; - no-map; - }; - - venus_region: venus@90400000 { - reg = <0x0 0x90400000 0x0 0x700000>; - no-map; - }; - - adsp_region: adsp@8ea00000 { - reg = <0x0 0x8ea00000 0x0 0x1a00000>; - no-map; - }; - - mpss_region: mpss@88800000 { - reg = <0x0 0x88800000 0x0 0x6200000>; - no-map; - }; - - smem_mem: smem-mem@86000000 { - reg = <0x0 0x86000000 0x0 0x200000>; - no-map; - }; - - memory@85800000 { - reg = <0x0 0x85800000 0x0 0x800000>; - no-map; - }; - - memory@86200000 { - reg = <0x0 0x86200000 0x0 0x2600000>; - no-map; - }; - - rmtfs@86700000 { - compatible = "qcom,rmtfs-mem"; - - size = <0x0 0x200000>; - alloc-ranges = <0x0 0xa0000000 0x0 0x2000000>; - no-map; - - qcom,client-id = <1>; - qcom,vmid = <15>; + clocks { + xo_board: xo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + clock-output-names = "xo_board"; }; - zap_shader_region: gpu@8f200000 { - compatible = "shared-dma-pool"; - reg = <0x0 0x90b00000 0x0 0xa00000>; - no-map; + sleep_clk: sleep_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32764>; + clock-output-names = "sleep_clk"; }; }; @@ -173,291 +120,93 @@ }; }; - thermal-zones { - cpu0-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens0 3>; - - trips { - cpu0_alert0: trip-point@0 { - temperature = <75000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu0_crit: cpu_crit { - temperature = <110000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - }; - - cpu1-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens0 5>; - - trips { - cpu1_alert0: trip-point@0 { - temperature = <75000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu1_crit: cpu_crit { - temperature = <110000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - }; - - cpu2-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens0 8>; - - trips { - cpu2_alert0: trip-point@0 { - temperature = <75000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu2_crit: cpu_crit { - temperature = <110000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - }; - - cpu3-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens0 10>; - - trips { - cpu3_alert0: trip-point@0 { - temperature = <75000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu3_crit: cpu_crit { - temperature = <110000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - }; - - gpu-thermal-top { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens1 6>; - - trips { - gpu1_alert0: trip-point@0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; + firmware { + scm { + compatible = "qcom,scm-msm8996"; + qcom,dload-mode = <&tcsr 0x13000>; }; + }; - gpu-thermal-bottom { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens1 7>; + tcsr_mutex: hwlock { + compatible = "qcom,tcsr-mutex"; + syscon = <&tcsr_mutex_regs 0 0x1000>; + #hwlock-cells = <1>; + }; - trips { - gpu2_alert0: trip-point@0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; - }; + memory { + device_type = "memory"; + /* We expect the bootloader to fill in the reg */ + reg = <0 0 0 0>; + }; - m4m-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; - thermal-sensors = <&tsens0 1>; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; - trips { - m4m_alert0: trip-point@0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; + mba_region: mba@91500000 { + reg = <0x0 0x91500000 0x0 0x200000>; + no-map; }; - l3-or-venus-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens0 2>; - - trips { - l3_or_venus_alert0: trip-point@0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; + slpi_region: slpi@90b00000 { + reg = <0x0 0x90b00000 0x0 0xa00000>; + no-map; }; - cluster0-l2-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens0 7>; - - trips { - cluster0_l2_alert0: trip-point@0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; + venus_region: venus@90400000 { + reg = <0x0 0x90400000 0x0 0x700000>; + no-map; }; - cluster1-l2-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens0 12>; - - trips { - cluster1_l2_alert0: trip-point@0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; + adsp_region: adsp@8ea00000 { + reg = <0x0 0x8ea00000 0x0 0x1a00000>; + no-map; }; - camera-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens1 1>; - - trips { - camera_alert0: trip-point@0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; + mpss_region: mpss@88800000 { + reg = <0x0 0x88800000 0x0 0x6200000>; + no-map; }; - q6-dsp-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens1 2>; - - trips { - q6_dsp_alert0: trip-point@0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; + smem_mem: smem-mem@86000000 { + reg = <0x0 0x86000000 0x0 0x200000>; + no-map; }; - mem-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens1 3>; - - trips { - mem_alert0: trip-point@0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; + memory@85800000 { + reg = <0x0 0x85800000 0x0 0x800000>; + no-map; }; - modemtx-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens1 4>; - - trips { - modemtx_alert0: trip-point@0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; + memory@86200000 { + reg = <0x0 0x86200000 0x0 0x2600000>; + no-map; }; - }; - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, - <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, - <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, - <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; - }; + rmtfs@86700000 { + compatible = "qcom,rmtfs-mem"; - clocks { - xo_board: xo_board { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <19200000>; - clock-output-names = "xo_board"; - }; + size = <0x0 0x200000>; + alloc-ranges = <0x0 0xa0000000 0x0 0x2000000>; + no-map; - sleep_clk: sleep_clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32764>; - clock-output-names = "sleep_clk"; + qcom,client-id = <1>; + qcom,vmid = <15>; }; - }; - - psci { - compatible = "arm,psci-1.0"; - method = "smc"; - }; - - firmware { - scm { - compatible = "qcom,scm-msm8996"; - qcom,dload-mode = <&tcsr 0x13000>; + zap_shader_region: gpu@8f200000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x90b00000 0x0 0xa00000>; + no-map; }; }; - tcsr_mutex: hwlock { - compatible = "qcom,tcsr-mutex"; - syscon = <&tcsr_mutex_regs 0 0x1000>; - #hwlock-cells = <1>; - }; - - smem { - compatible = "qcom,smem"; - memory-region = <&smem_mem>; - hwlocks = <&tcsr_mutex 3>; - }; - rpm-glink { compatible = "qcom,glink-rpm"; @@ -467,7 +216,7 @@ mboxes = <&apcs_glb 0>; - rpm_requests { + rpm_requests: rpm-requests { compatible = "qcom,rpm-msm8996"; qcom,glink-channels = "rpm_requests"; @@ -509,57 +258,83 @@ }; }; }; + }; + }; - pm8994-regulators { - compatible = "qcom,rpm-pm8994-regulators"; - - pm8994_s1: s1 {}; - pm8994_s2: s2 {}; - pm8994_s3: s3 {}; - pm8994_s4: s4 {}; - pm8994_s5: s5 {}; - pm8994_s6: s6 {}; - pm8994_s7: s7 {}; - pm8994_s8: s8 {}; - pm8994_s9: s9 {}; - pm8994_s10: s10 {}; - pm8994_s11: s11 {}; - pm8994_s12: s12 {}; - - pm8994_l1: l1 {}; - pm8994_l2: l2 {}; - pm8994_l3: l3 {}; - pm8994_l4: l4 {}; - pm8994_l5: l5 {}; - pm8994_l6: l6 {}; - pm8994_l7: l7 {}; - pm8994_l8: l8 {}; - pm8994_l9: l9 {}; - pm8994_l10: l10 {}; - pm8994_l11: l11 {}; - pm8994_l12: l12 {}; - pm8994_l13: l13 {}; - pm8994_l14: l14 {}; - pm8994_l15: l15 {}; - pm8994_l16: l16 {}; - pm8994_l17: l17 {}; - pm8994_l18: l18 {}; - pm8994_l19: l19 {}; - pm8994_l20: l20 {}; - pm8994_l21: l21 {}; - pm8994_l22: l22 {}; - pm8994_l23: l23 {}; - pm8994_l24: l24 {}; - pm8994_l25: l25 {}; - pm8994_l26: l26 {}; - pm8994_l27: l27 {}; - pm8994_l28: l28 {}; - pm8994_l29: l29 {}; - pm8994_l30: l30 {}; - pm8994_l31: l31 {}; - pm8994_l32: l32 {}; - }; + smem { + compatible = "qcom,smem"; + memory-region = <&smem_mem>; + hwlocks = <&tcsr_mutex 3>; + }; + + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + + interrupts = <0 158 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apcs_glb 10>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + smp2p_adsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + smp2p_adsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-modem { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + + interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apcs_glb 14>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + modem_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + modem_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-slpi { + compatible = "qcom,smp2p"; + qcom,smem = <481>, <430>; + + interrupts = <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apcs_glb 26>; + + qcom,local-pid = <0>; + qcom,remote-pid = <3>; + + smp2p_slpi_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + + smp2p_slpi_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; }; }; @@ -569,9 +344,90 @@ ranges = <0 0 0 0xffffffff>; compatible = "simple-bus"; + pcie_phy: phy@34000 { + compatible = "qcom,msm8996-qmp-pcie-phy"; + reg = <0x00034000 0x488>; + #clock-cells = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, + <&gcc GCC_PCIE_PHY_CFG_AHB_CLK>, + <&gcc GCC_PCIE_CLKREF_CLK>; + clock-names = "aux", "cfg_ahb", "ref"; + + resets = <&gcc GCC_PCIE_PHY_BCR>, + <&gcc GCC_PCIE_PHY_COM_BCR>, + <&gcc GCC_PCIE_PHY_COM_NOCSR_BCR>; + reset-names = "phy", "common", "cfg"; + status = "disabled"; + + pciephy_0: lane@35000 { + reg = <0x00035000 0x130>, + <0x00035200 0x200>, + <0x00035400 0x1dc>; + #phy-cells = <0>; + + clock-output-names = "pcie_0_pipe_clk_src"; + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; + clock-names = "pipe0"; + resets = <&gcc GCC_PCIE_0_PHY_BCR>; + reset-names = "lane0"; + }; + + pciephy_1: lane@36000 { + reg = <0x00036000 0x130>, + <0x00036200 0x200>, + <0x00036400 0x1dc>; + #phy-cells = <0>; + + clock-output-names = "pcie_1_pipe_clk_src"; + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>; + clock-names = "pipe1"; + resets = <&gcc GCC_PCIE_1_PHY_BCR>; + reset-names = "lane1"; + }; + + pciephy_2: lane@37000 { + reg = <0x00037000 0x130>, + <0x00037200 0x200>, + <0x00037400 0x1dc>; + #phy-cells = <0>; + + clock-output-names = "pcie_2_pipe_clk_src"; + clocks = <&gcc GCC_PCIE_2_PIPE_CLK>; + clock-names = "pipe2"; + resets = <&gcc GCC_PCIE_2_PHY_BCR>; + reset-names = "lane2"; + }; + }; + rpm_msg_ram: memory@68000 { compatible = "qcom,rpm-msg-ram"; - reg = <0x68000 0x6000>; + reg = <0x00068000 0x6000>; + }; + + qfprom@74000 { + compatible = "qcom,qfprom"; + reg = <0x00074000 0x8ff>; + #address-cells = <1>; + #size-cells = <1>; + + qusb2p_hstx_trim: hstx_trim@24e { + reg = <0x24e 0x2>; + bits = <5 4>; + }; + + qusb2s_hstx_trim: hstx_trim@24f { + reg = <0x24f 0x1>; + bits = <1 4>; + }; + + gpu_speed_bin: gpu_speed_bin@133 { + reg = <0x133 0x1>; + bits = <5 3>; + }; }; rng: rng@83000 { @@ -581,60 +437,790 @@ clock-names = "core"; }; - tcsr_mutex_regs: syscon@740000 { - compatible = "syscon"; - reg = <0x740000 0x20000>; + gcc: clock-controller@300000 { + compatible = "qcom,gcc-msm8996"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0x00300000 0x90000>; }; tsens0: thermal-sensor@4a9000 { compatible = "qcom,msm8996-tsens"; - reg = <0x4a9000 0x1000>, /* TM */ - <0x4a8000 0x1000>; /* SROT */ + reg = <0x004a9000 0x1000>, /* TM */ + <0x004a8000 0x1000>; /* SROT */ #qcom,sensors = <13>; - interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "uplow"; + interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; #thermal-sensor-cells = <1>; }; tsens1: thermal-sensor@4ad000 { compatible = "qcom,msm8996-tsens"; - reg = <0x4ad000 0x1000>, /* TM */ - <0x4ac000 0x1000>; /* SROT */ + reg = <0x004ad000 0x1000>, /* TM */ + <0x004ac000 0x1000>; /* SROT */ #qcom,sensors = <8>; - interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "uplow"; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; #thermal-sensor-cells = <1>; }; + tcsr_mutex_regs: syscon@740000 { + compatible = "syscon"; + reg = <0x00740000 0x20000>; + }; + tcsr: syscon@7a0000 { compatible = "qcom,tcsr-msm8996", "syscon"; - reg = <0x7a0000 0x18000>; + reg = <0x007a0000 0x18000>; }; - intc: interrupt-controller@9bc0000 { - compatible = "qcom,msm8996-gic-v3", "arm,gic-v3"; - #interrupt-cells = <3>; + mmcc: clock-controller@8c0000 { + compatible = "qcom,mmcc-msm8996"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0x008c0000 0x40000>; + assigned-clocks = <&mmcc MMPLL9_PLL>, + <&mmcc MMPLL1_PLL>, + <&mmcc MMPLL3_PLL>, + <&mmcc MMPLL4_PLL>, + <&mmcc MMPLL5_PLL>; + assigned-clock-rates = <624000000>, + <810000000>, + <980000000>, + <960000000>, + <825000000>; + }; + + mdss: mdss@900000 { + compatible = "qcom,mdss"; + + reg = <0x00900000 0x1000>, + <0x009b0000 0x1040>, + <0x009b8000 0x1040>; + reg-names = "mdss_phys", + "vbif_phys", + "vbif_nrt_phys"; + + power-domains = <&mmcc MDSS_GDSC>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; - #redistributor-regions = <1>; - redistributor-stride = <0x0 0x40000>; - reg = <0x09bc0000 0x10000>, - <0x09c00000 0x100000>; - interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + + clocks = <&mmcc MDSS_AHB_CLK>; + clock-names = "iface"; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mdp: mdp@901000 { + compatible = "qcom,mdp5"; + reg = <0x00901000 0x90000>; + reg-names = "mdp_phys"; + + interrupt-parent = <&mdss>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_MDP_CLK>, + <&mmcc SMMU_MDP_AXI_CLK>, + <&mmcc MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "core", + "iommu", + "vsync"; + + iommus = <&mdp_smmu 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdp5_intf3_out: endpoint { + remote-endpoint = <&hdmi_in>; + }; + }; + }; + }; + + hdmi: hdmi-tx@9a0000 { + compatible = "qcom,hdmi-tx-8996"; + reg = <0x009a0000 0x50c>, + <0x00070000 0x6158>, + <0x009e0000 0xfff>; + reg-names = "core_physical", + "qfprom_physical", + "hdcp_physical"; + + interrupt-parent = <&mdss>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_HDMI_CLK>, + <&mmcc MDSS_HDMI_AHB_CLK>, + <&mmcc MDSS_EXTPCLK_CLK>; + clock-names = + "mdp_core", + "iface", + "core", + "alt_iface", + "extp"; + + phys = <&hdmi_phy>; + phy-names = "hdmi_phy"; + #sound-dai-cells = <1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + hdmi_in: endpoint { + remote-endpoint = <&mdp5_intf3_out>; + }; + }; + }; + }; + + hdmi_phy: hdmi-phy@9a0600 { + #phy-cells = <0>; + compatible = "qcom,hdmi-phy-8996"; + reg = <0x009a0600 0x1c4>, + <0x009a0a00 0x124>, + <0x009a0c00 0x124>, + <0x009a0e00 0x124>, + <0x009a1000 0x124>, + <0x009a1200 0x0c8>; + reg-names = "hdmi_pll", + "hdmi_tx_l0", + "hdmi_tx_l1", + "hdmi_tx_l2", + "hdmi_tx_l3", + "hdmi_phy"; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&gcc GCC_HDMI_CLKREF_CLK>; + clock-names = "iface", + "ref"; + }; }; + gpu@b00000 { + compatible = "qcom,adreno-530.2", "qcom,adreno"; + #stream-id-cells = <16>; - apcs_glb: mailbox@9820000 { - compatible = "qcom,msm8996-apcs-hmss-global"; - reg = <0x9820000 0x1000>; + reg = <0x00b00000 0x3f000>; + reg-names = "kgsl_3d0_reg_memory"; - #mbox-cells = <1>; + interrupts = <0 300 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&mmcc GPU_GX_GFX3D_CLK>, + <&mmcc GPU_AHB_CLK>, + <&mmcc GPU_GX_RBBMTIMER_CLK>, + <&gcc GCC_BIMC_GFX_CLK>, + <&gcc GCC_MMSS_BIMC_GFX_CLK>; + + clock-names = "core", + "iface", + "rbbmtimer", + "mem", + "mem_iface"; + + power-domains = <&mmcc GPU_GDSC>; + iommus = <&adreno_smmu 0>; + + nvmem-cells = <&gpu_speed_bin>; + nvmem-cell-names = "speed_bin"; + + qcom,gpu-quirk-two-pass-use-wfi; + qcom,gpu-quirk-fault-detect-mask; + + operating-points-v2 = <&gpu_opp_table>; + + gpu_opp_table: opp-table { + compatible ="operating-points-v2"; + + /* + * 624Mhz and 560Mhz are only available on speed + * bin (1 << 0). All the rest are available on + * all bins of the hardware + */ + opp-624000000 { + opp-hz = /bits/ 64 <624000000>; + opp-supported-hw = <0x01>; + }; + opp-560000000 { + opp-hz = /bits/ 64 <560000000>; + opp-supported-hw = <0x01>; + }; + opp-510000000 { + opp-hz = /bits/ 64 <510000000>; + opp-supported-hw = <0xFF>; + }; + opp-401800000 { + opp-hz = /bits/ 64 <401800000>; + opp-supported-hw = <0xFF>; + }; + opp-315000000 { + opp-hz = /bits/ 64 <315000000>; + opp-supported-hw = <0xFF>; + }; + opp-214000000 { + opp-hz = /bits/ 64 <214000000>; + opp-supported-hw = <0xFF>; + }; + opp-133000000 { + opp-hz = /bits/ 64 <133000000>; + opp-supported-hw = <0xFF>; + }; + }; + + zap-shader { + memory-region = <&zap_shader_region>; + }; }; - gcc: clock-controller@300000 { - compatible = "qcom,gcc-msm8996"; - #clock-cells = <1>; + msmgpio: pinctrl@1010000 { + compatible = "qcom,msm8996-pinctrl"; + reg = <0x01010000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + spmi_bus: qcom,spmi@400f000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0400f000 0x1000>, + <0x04400000 0x800000>, + <0x04c00000 0x800000>, + <0x05800000 0x200000>, + <0x0400a000 0x002100>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + agnoc@0 { + power-domains = <&gcc AGGRE0_NOC_GDSC>; + compatible = "simple-pm-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pcie0: pcie@600000 { + compatible = "qcom,pcie-msm8996", "snps,dw-pcie"; + status = "disabled"; + power-domains = <&gcc PCIE0_GDSC>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + + reg = <0x00600000 0x2000>, + <0x0c000000 0xf1d>, + <0x0c000f20 0xa8>, + <0x0c100000 0x100000>; + reg-names = "parf", "dbi", "elbi","config"; + + phys = <&pciephy_0>; + phy-names = "pciephy"; + + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0x0 0x0c200000 0x0c200000 0x0 0x100000>, + <0x02000000 0x0 0x0c300000 0x0c300000 0x0 0xd00000>; + + interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pcie0_clkreq_default &pcie0_perst_default &pcie0_wake_default>; + pinctrl-1 = <&pcie0_clkreq_sleep &pcie0_perst_default &pcie0_wake_sleep>; + + linux,pci-domain = <0>; + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, + <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>; + + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave"; + + }; + + pcie1: pcie@608000 { + compatible = "qcom,pcie-msm8996", "snps,dw-pcie"; + power-domains = <&gcc PCIE1_GDSC>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + + status = "disabled"; + + reg = <0x00608000 0x2000>, + <0x0d000000 0xf1d>, + <0x0d000f20 0xa8>, + <0x0d100000 0x100000>; + + reg-names = "parf", "dbi", "elbi","config"; + + phys = <&pciephy_1>; + phy-names = "pciephy"; + + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0x0 0x0d200000 0x0d200000 0x0 0x100000>, + <0x02000000 0x0 0x0d300000 0x0d300000 0x0 0xd00000>; + + interrupts = <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 272 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 273 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 274 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 275 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pcie1_clkreq_default &pcie1_perst_default &pcie1_wake_default>; + pinctrl-1 = <&pcie1_clkreq_sleep &pcie1_perst_default &pcie1_wake_sleep>; + + linux,pci-domain = <1>; + + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, + <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_AXI_CLK>; + + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave"; + }; + + pcie2: pcie@610000 { + compatible = "qcom,pcie-msm8996", "snps,dw-pcie"; + power-domains = <&gcc PCIE2_GDSC>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + status = "disabled"; + reg = <0x00610000 0x2000>, + <0x0e000000 0xf1d>, + <0x0e000f20 0xa8>, + <0x0e100000 0x100000>; + + reg-names = "parf", "dbi", "elbi","config"; + + phys = <&pciephy_2>; + phy-names = "pciephy"; + + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0x0 0x0e200000 0x0e200000 0x0 0x100000>, + <0x02000000 0x0 0x0e300000 0x0e300000 0x0 0x1d00000>; + + device_type = "pci"; + + interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pcie2_clkreq_default &pcie2_perst_default &pcie2_wake_default>; + pinctrl-1 = <&pcie2_clkreq_sleep &pcie2_perst_default &pcie2_wake_sleep >; + + linux,pci-domain = <2>; + clocks = <&gcc GCC_PCIE_2_PIPE_CLK>, + <&gcc GCC_PCIE_2_AUX_CLK>, + <&gcc GCC_PCIE_2_CFG_AHB_CLK>, + <&gcc GCC_PCIE_2_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_2_SLV_AXI_CLK>; + + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave"; + }; + }; + + ufshc: ufshc@624000 { + compatible = "qcom,ufshc"; + reg = <0x00624000 0x2500>; + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; + + phys = <&ufsphy>; + phy-names = "ufsphy"; + + power-domains = <&gcc UFS_GDSC>; + + clock-names = + "core_clk_src", + "core_clk", + "bus_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro_src", + "core_clk_unipro", + "core_clk_ice", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk"; + clocks = + <&gcc UFS_AXI_CLK_SRC>, + <&gcc GCC_UFS_AXI_CLK>, + <&gcc GCC_SYS_NOC_UFS_AXI_CLK>, + <&gcc GCC_AGGRE2_UFS_AXI_CLK>, + <&gcc GCC_UFS_AHB_CLK>, + <&gcc UFS_ICE_CORE_CLK_SRC>, + <&gcc GCC_UFS_UNIPRO_CORE_CLK>, + <&gcc GCC_UFS_ICE_CORE_CLK>, + <&rpmcc RPM_SMD_LN_BB_CLK>, + <&gcc GCC_UFS_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_RX_SYMBOL_0_CLK>; + freq-table-hz = + <100000000 200000000>, + <0 0>, + <0 0>, + <0 0>, + <0 0>, + <150000000 300000000>, + <0 0>, + <0 0>, + <0 0>, + <0 0>, + <0 0>; + + lanes-per-direction = <1>; #reset-cells = <1>; - #power-domain-cells = <1>; - reg = <0x300000 0x90000>; + status = "disabled"; + + ufs_variant { + compatible = "qcom,ufs_variant"; + }; + }; + + ufsphy: phy@627000 { + compatible = "qcom,msm8996-ufs-phy-qmp-14nm"; + reg = <0x00627000 0xda8>; + reg-names = "phy_mem"; + #phy-cells = <0>; + + clock-names = "ref_clk_src", "ref_clk"; + clocks = <&rpmcc RPM_SMD_LN_BB_CLK>, + <&gcc GCC_UFS_CLKREF_CLK>; + resets = <&ufshc 0>; + status = "disabled"; + }; + + camss: camss@a00000 { + compatible = "qcom,msm8996-camss"; + reg = <0x00a34000 0x1000>, + <0x00a00030 0x4>, + <0x00a35000 0x1000>, + <0x00a00038 0x4>, + <0x00a36000 0x1000>, + <0x00a00040 0x4>, + <0x00a30000 0x100>, + <0x00a30400 0x100>, + <0x00a30800 0x100>, + <0x00a30c00 0x100>, + <0x00a31000 0x500>, + <0x00a00020 0x10>, + <0x00a10000 0x1000>, + <0x00a14000 0x1000>; + reg-names = "csiphy0", + "csiphy0_clk_mux", + "csiphy1", + "csiphy1_clk_mux", + "csiphy2", + "csiphy2_clk_mux", + "csid0", + "csid1", + "csid2", + "csid3", + "ispif", + "csi_clk_mux", + "vfe0", + "vfe1"; + interrupts = <GIC_SPI 78 0>, + <GIC_SPI 79 0>, + <GIC_SPI 80 0>, + <GIC_SPI 296 0>, + <GIC_SPI 297 0>, + <GIC_SPI 298 0>, + <GIC_SPI 299 0>, + <GIC_SPI 309 0>, + <GIC_SPI 314 0>, + <GIC_SPI 315 0>; + interrupt-names = "csiphy0", + "csiphy1", + "csiphy2", + "csid0", + "csid1", + "csid2", + "csid3", + "ispif", + "vfe0", + "vfe1"; + power-domains = <&mmcc VFE0_GDSC>; + clocks = <&mmcc CAMSS_TOP_AHB_CLK>, + <&mmcc CAMSS_ISPIF_AHB_CLK>, + <&mmcc CAMSS_CSI0PHYTIMER_CLK>, + <&mmcc CAMSS_CSI1PHYTIMER_CLK>, + <&mmcc CAMSS_CSI2PHYTIMER_CLK>, + <&mmcc CAMSS_CSI0_AHB_CLK>, + <&mmcc CAMSS_CSI0_CLK>, + <&mmcc CAMSS_CSI0PHY_CLK>, + <&mmcc CAMSS_CSI0PIX_CLK>, + <&mmcc CAMSS_CSI0RDI_CLK>, + <&mmcc CAMSS_CSI1_AHB_CLK>, + <&mmcc CAMSS_CSI1_CLK>, + <&mmcc CAMSS_CSI1PHY_CLK>, + <&mmcc CAMSS_CSI1PIX_CLK>, + <&mmcc CAMSS_CSI1RDI_CLK>, + <&mmcc CAMSS_CSI2_AHB_CLK>, + <&mmcc CAMSS_CSI2_CLK>, + <&mmcc CAMSS_CSI2PHY_CLK>, + <&mmcc CAMSS_CSI2PIX_CLK>, + <&mmcc CAMSS_CSI2RDI_CLK>, + <&mmcc CAMSS_CSI3_AHB_CLK>, + <&mmcc CAMSS_CSI3_CLK>, + <&mmcc CAMSS_CSI3PHY_CLK>, + <&mmcc CAMSS_CSI3PIX_CLK>, + <&mmcc CAMSS_CSI3RDI_CLK>, + <&mmcc CAMSS_AHB_CLK>, + <&mmcc CAMSS_VFE0_CLK>, + <&mmcc CAMSS_CSI_VFE0_CLK>, + <&mmcc CAMSS_VFE0_AHB_CLK>, + <&mmcc CAMSS_VFE0_STREAM_CLK>, + <&mmcc CAMSS_VFE1_CLK>, + <&mmcc CAMSS_CSI_VFE1_CLK>, + <&mmcc CAMSS_VFE1_AHB_CLK>, + <&mmcc CAMSS_VFE1_STREAM_CLK>, + <&mmcc CAMSS_VFE_AHB_CLK>, + <&mmcc CAMSS_VFE_AXI_CLK>; + clock-names = "top_ahb", + "ispif_ahb", + "csiphy0_timer", + "csiphy1_timer", + "csiphy2_timer", + "csi0_ahb", + "csi0", + "csi0_phy", + "csi0_pix", + "csi0_rdi", + "csi1_ahb", + "csi1", + "csi1_phy", + "csi1_pix", + "csi1_rdi", + "csi2_ahb", + "csi2", + "csi2_phy", + "csi2_pix", + "csi2_rdi", + "csi3_ahb", + "csi3", + "csi3_phy", + "csi3_pix", + "csi3_rdi", + "ahb", + "vfe0", + "csi_vfe0", + "vfe0_ahb", + "vfe0_stream", + "vfe1", + "csi_vfe1", + "vfe1_ahb", + "vfe1_stream", + "vfe_ahb", + "vfe_axi"; + iommus = <&vfe_smmu 0>, + <&vfe_smmu 1>, + <&vfe_smmu 2>, + <&vfe_smmu 3>; + status = "disabled"; + ports { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + adreno_smmu: iommu@b40000 { + compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; + reg = <0x00b40000 0x10000>; + + #global-interrupts = <1>; + interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + + clocks = <&mmcc GPU_AHB_CLK>, + <&gcc GCC_MMSS_BIMC_GFX_CLK>; + clock-names = "iface", "bus"; + + power-domains = <&mmcc GPU_GDSC>; + }; + + video-codec@c00000 { + compatible = "qcom,msm8996-venus"; + reg = <0x00c00000 0xff000>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&mmcc VENUS_GDSC>; + clocks = <&mmcc VIDEO_CORE_CLK>, + <&mmcc VIDEO_AHB_CLK>, + <&mmcc VIDEO_AXI_CLK>, + <&mmcc VIDEO_MAXI_CLK>; + clock-names = "core", "iface", "bus", "mbus"; + iommus = <&venus_smmu 0x00>, + <&venus_smmu 0x01>, + <&venus_smmu 0x0a>, + <&venus_smmu 0x07>, + <&venus_smmu 0x0e>, + <&venus_smmu 0x0f>, + <&venus_smmu 0x08>, + <&venus_smmu 0x09>, + <&venus_smmu 0x0b>, + <&venus_smmu 0x0c>, + <&venus_smmu 0x0d>, + <&venus_smmu 0x10>, + <&venus_smmu 0x11>, + <&venus_smmu 0x21>, + <&venus_smmu 0x28>, + <&venus_smmu 0x29>, + <&venus_smmu 0x2b>, + <&venus_smmu 0x2c>, + <&venus_smmu 0x2d>, + <&venus_smmu 0x31>; + memory-region = <&venus_region>; + status = "okay"; + + video-decoder { + compatible = "venus-decoder"; + clocks = <&mmcc VIDEO_SUBCORE0_CLK>; + clock-names = "core"; + power-domains = <&mmcc VENUS_CORE0_GDSC>; + }; + + video-encoder { + compatible = "venus-encoder"; + clocks = <&mmcc VIDEO_SUBCORE1_CLK>; + clock-names = "core"; + power-domains = <&mmcc VENUS_CORE1_GDSC>; + }; + }; + + mdp_smmu: iommu@d00000 { + compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; + reg = <0x00d00000 0x10000>; + + #global-interrupts = <1>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + clocks = <&mmcc SMMU_MDP_AHB_CLK>, + <&mmcc SMMU_MDP_AXI_CLK>; + clock-names = "iface", "bus"; + + power-domains = <&mmcc MDSS_GDSC>; + }; + + venus_smmu: iommu@d40000 { + compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; + reg = <0x00d40000 0x20000>; + #global-interrupts = <1>; + interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&mmcc MMAGIC_VIDEO_GDSC>; + clocks = <&mmcc SMMU_VIDEO_AHB_CLK>, + <&mmcc SMMU_VIDEO_AXI_CLK>; + clock-names = "iface", "bus"; + #iommu-cells = <1>; + status = "okay"; + }; + + vfe_smmu: iommu@da0000 { + compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; + reg = <0x00da0000 0x10000>; + + #global-interrupts = <1>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&mmcc MMAGIC_CAMSS_GDSC>; + clocks = <&mmcc SMMU_VFE_AHB_CLK>, + <&mmcc SMMU_VFE_AXI_CLK>; + clock-names = "iface", + "bus"; + #iommu-cells = <1>; + }; + + lpass_q6_smmu: iommu@1600000 { + compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; + reg = <0x01600000 0x20000>; + #iommu-cells = <1>; + power-domains = <&gcc HLOS1_VOTE_LPASS_CORE_GDSC>; + + #global-interrupts = <1>; + interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_HLOS1_VOTE_LPASS_CORE_SMMU_CLK>, + <&gcc GCC_HLOS1_VOTE_LPASS_ADSP_SMMU_CLK>; + clock-names = "iface", "bus"; }; stm@3002000 { @@ -1104,13 +1690,119 @@ }; }; }; - kryocc: clock-controller@6400000 { compatible = "qcom,apcc-msm8996"; - reg = <0x6400000 0x90000>; + reg = <0x06400000 0x90000>; + #clock-cells = <1>; + }; + + usb3: usb@6af8800 { + compatible = "qcom,msm8996-dwc3", "qcom,dwc3"; + reg = <0x06af8800 0x400>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_SYS_NOC_USB3_AXI_CLK>, + <&gcc GCC_USB30_MASTER_CLK>, + <&gcc GCC_AGGRE2_USB3_AXI_CLK>, + <&gcc GCC_USB30_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SLEEP_CLK>, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>; + + assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_MASTER_CLK>; + assigned-clock-rates = <19200000>, <120000000>; + + power-domains = <&gcc USB30_GDSC>; + status = "disabled"; + + dwc3@6a00000 { + compatible = "snps,dwc3"; + reg = <0x06a00000 0xcc00>; + interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>; + phys = <&hsusb_phy1>, <&ssusb_phy_0>; + phy-names = "usb2-phy", "usb3-phy"; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + }; + }; + + usb3phy: phy@7410000 { + compatible = "qcom,msm8996-qmp-usb3-phy"; + reg = <0x07410000 0x1c4>; #clock-cells = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_USB3_PHY_AUX_CLK>, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_USB3_CLKREF_CLK>; + clock-names = "aux", "cfg_ahb", "ref"; + + resets = <&gcc GCC_USB3_PHY_BCR>, + <&gcc GCC_USB3PHY_PHY_BCR>; + reset-names = "phy", "common"; + status = "disabled"; + + ssusb_phy_0: lane@7410200 { + reg = <0x07410200 0x200>, + <0x07410400 0x130>, + <0x07410600 0x1a8>; + #phy-cells = <0>; + + clock-output-names = "usb3_phy_pipe_clk_src"; + clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>; + clock-names = "pipe0"; + }; }; + hsusb_phy1: phy@7411000 { + compatible = "qcom,msm8996-qusb2-phy"; + reg = <0x07411000 0x180>; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_RX1_USB2_CLKREF_CLK>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + nvmem-cells = <&qusb2p_hstx_trim>; + status = "disabled"; + }; + + hsusb_phy2: phy@7412000 { + compatible = "qcom,msm8996-qusb2-phy"; + reg = <0x07412000 0x180>; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_RX2_USB2_CLKREF_CLK>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; + nvmem-cells = <&qusb2s_hstx_trim>; + status = "disabled"; + }; + + sdhc2: sdhci@74a4900 { + status = "disabled"; + compatible = "qcom,sdhci-msm-v4"; + reg = <0x074a4900 0x314>, <0x074a4000 0x800>; + reg-names = "hc_mem", "core_mem"; + + interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>, + <0 221 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clock-names = "iface", "core", "xo"; + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&xo_board>; + bus-width = <4>; + }; + blsp1_uart1: serial@7570000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0x07570000 0x1000>; @@ -1136,16 +1828,16 @@ status = "disabled"; }; - blsp2_i2c0: i2c@75b5000 { + blsp1_i2c2: i2c@7577000 { compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x075b5000 0x1000>; - interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP2_AHB_CLK>, - <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>; + reg = <0x07577000 0x1000>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>; clock-names = "iface", "core"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp2_i2c0_default>; - pinctrl-1 = <&blsp2_i2c0_sleep>; + pinctrl-0 = <&blsp1_i2c2_default>; + pinctrl-1 = <&blsp1_i2c2_sleep>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1153,7 +1845,7 @@ blsp2_uart1: serial@75b0000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; - reg = <0x75b0000 0x1000>; + reg = <0x075b0000 0x1000>; interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; @@ -1161,21 +1853,6 @@ status = "disabled"; }; - blsp2_i2c1: i2c@75b6000 { - compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x075b6000 0x1000>; - interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP2_AHB_CLK>, - <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>; - clock-names = "iface", "core"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp2_i2c1_default>; - pinctrl-1 = <&blsp2_i2c1_sleep>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - blsp2_uart2: serial@75b1000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0x075b1000 0x1000>; @@ -1186,16 +1863,31 @@ status = "disabled"; }; - blsp1_i2c2: i2c@7577000 { + blsp2_i2c0: i2c@75b5000 { compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x07577000 0x1000>; - interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>; + reg = <0x075b5000 0x1000>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_AHB_CLK>, + <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>; clock-names = "iface", "core"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp1_i2c2_default>; - pinctrl-1 = <&blsp1_i2c2_sleep>; + pinctrl-0 = <&blsp2_i2c0_default>; + pinctrl-1 = <&blsp2_i2c0_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp2_i2c1: i2c@75b6000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x075b6000 0x1000>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_AHB_CLK>, + <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>; + clock-names = "iface", "core"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_i2c1_default>; + pinctrl-1 = <&blsp2_i2c1_sleep>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1216,369 +1908,9 @@ status = "disabled"; }; - sdhc2: sdhci@74a4900 { - status = "disabled"; - compatible = "qcom,sdhci-msm-v4"; - reg = <0x74a4900 0x314>, <0x74a4000 0x800>; - reg-names = "hc_mem", "core_mem"; - - interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>, - <0 221 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hc_irq", "pwr_irq"; - - clock-names = "iface", "core", "xo"; - clocks = <&gcc GCC_SDCC2_AHB_CLK>, - <&gcc GCC_SDCC2_APPS_CLK>, - <&xo_board>; - bus-width = <4>; - }; - - msmgpio: pinctrl@1010000 { - compatible = "qcom,msm8996-pinctrl"; - reg = <0x01010000 0x300000>; - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - timer@9840000 { - #address-cells = <1>; - #size-cells = <1>; - ranges; - compatible = "arm,armv7-timer-mem"; - reg = <0x09840000 0x1000>; - clock-frequency = <19200000>; - - frame@9850000 { - frame-number = <0>; - interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x09850000 0x1000>, - <0x09860000 0x1000>; - }; - - frame@9870000 { - frame-number = <1>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x09870000 0x1000>; - status = "disabled"; - }; - - frame@9880000 { - frame-number = <2>; - interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x09880000 0x1000>; - status = "disabled"; - }; - - frame@9890000 { - frame-number = <3>; - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x09890000 0x1000>; - status = "disabled"; - }; - - frame@98a0000 { - frame-number = <4>; - interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x098a0000 0x1000>; - status = "disabled"; - }; - - frame@98b0000 { - frame-number = <5>; - interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x098b0000 0x1000>; - status = "disabled"; - }; - - frame@98c0000 { - frame-number = <6>; - interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x098c0000 0x1000>; - status = "disabled"; - }; - }; - - spmi_bus: qcom,spmi@400f000 { - compatible = "qcom,spmi-pmic-arb"; - reg = <0x400f000 0x1000>, - <0x4400000 0x800000>, - <0x4c00000 0x800000>, - <0x5800000 0x200000>, - <0x400a000 0x002100>; - reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; - interrupt-names = "periph_irq"; - interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>; - qcom,ee = <0>; - qcom,channel = <0>; - #address-cells = <2>; - #size-cells = <0>; - interrupt-controller; - #interrupt-cells = <4>; - }; - - ufsphy: phy@627000 { - compatible = "qcom,msm8996-ufs-phy-qmp-14nm"; - reg = <0x627000 0xda8>; - reg-names = "phy_mem"; - #phy-cells = <0>; - - vdda-phy-supply = <&pm8994_l28>; - vdda-pll-supply = <&pm8994_l12>; - - vdda-phy-max-microamp = <18380>; - vdda-pll-max-microamp = <9440>; - - vddp-ref-clk-supply = <&pm8994_l25>; - vddp-ref-clk-max-microamp = <100>; - vddp-ref-clk-always-on; - - clock-names = "ref_clk_src", "ref_clk"; - clocks = <&rpmcc RPM_SMD_LN_BB_CLK>, - <&gcc GCC_UFS_CLKREF_CLK>; - resets = <&ufshc 0>; - status = "disabled"; - }; - - ufshc: ufshc@624000 { - compatible = "qcom,ufshc"; - reg = <0x624000 0x2500>; - interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; - - phys = <&ufsphy>; - phy-names = "ufsphy"; - - vcc-supply = <&pm8994_l20>; - vccq-supply = <&pm8994_l25>; - vccq2-supply = <&pm8994_s4>; - - vcc-max-microamp = <600000>; - vccq-max-microamp = <450000>; - vccq2-max-microamp = <450000>; - - power-domains = <&gcc UFS_GDSC>; - - clock-names = - "core_clk_src", - "core_clk", - "bus_clk", - "bus_aggr_clk", - "iface_clk", - "core_clk_unipro_src", - "core_clk_unipro", - "core_clk_ice", - "ref_clk", - "tx_lane0_sync_clk", - "rx_lane0_sync_clk"; - clocks = - <&gcc UFS_AXI_CLK_SRC>, - <&gcc GCC_UFS_AXI_CLK>, - <&gcc GCC_SYS_NOC_UFS_AXI_CLK>, - <&gcc GCC_AGGRE2_UFS_AXI_CLK>, - <&gcc GCC_UFS_AHB_CLK>, - <&gcc UFS_ICE_CORE_CLK_SRC>, - <&gcc GCC_UFS_UNIPRO_CORE_CLK>, - <&gcc GCC_UFS_ICE_CORE_CLK>, - <&rpmcc RPM_SMD_LN_BB_CLK>, - <&gcc GCC_UFS_TX_SYMBOL_0_CLK>, - <&gcc GCC_UFS_RX_SYMBOL_0_CLK>; - freq-table-hz = - <100000000 200000000>, - <0 0>, - <0 0>, - <0 0>, - <0 0>, - <150000000 300000000>, - <0 0>, - <0 0>, - <0 0>, - <0 0>, - <0 0>; - - lanes-per-direction = <1>; - #reset-cells = <1>; - status = "disabled"; - - ufs_variant { - compatible = "qcom,ufs_variant"; - }; - }; - - mmcc: clock-controller@8c0000 { - compatible = "qcom,mmcc-msm8996"; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - reg = <0x8c0000 0x40000>; - assigned-clocks = <&mmcc MMPLL9_PLL>, - <&mmcc MMPLL1_PLL>, - <&mmcc MMPLL3_PLL>, - <&mmcc MMPLL4_PLL>, - <&mmcc MMPLL5_PLL>; - assigned-clock-rates = <624000000>, - <810000000>, - <980000000>, - <960000000>, - <825000000>; - }; - - qfprom@74000 { - compatible = "qcom,qfprom"; - reg = <0x74000 0x8ff>; - #address-cells = <1>; - #size-cells = <1>; - - qusb2p_hstx_trim: hstx_trim@24e { - reg = <0x24e 0x2>; - bits = <5 4>; - }; - - qusb2s_hstx_trim: hstx_trim@24f { - reg = <0x24f 0x1>; - bits = <1 4>; - }; - - gpu_speed_bin: gpu_speed_bin@133 { - reg = <0x133 0x1>; - bits = <5 3>; - }; - }; - - phy@34000 { - compatible = "qcom,msm8996-qmp-pcie-phy"; - reg = <0x34000 0x488>; - #clock-cells = <1>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, - <&gcc GCC_PCIE_PHY_CFG_AHB_CLK>, - <&gcc GCC_PCIE_CLKREF_CLK>; - clock-names = "aux", "cfg_ahb", "ref"; - - vdda-phy-supply = <&pm8994_l28>; - vdda-pll-supply = <&pm8994_l12>; - - resets = <&gcc GCC_PCIE_PHY_BCR>, - <&gcc GCC_PCIE_PHY_COM_BCR>, - <&gcc GCC_PCIE_PHY_COM_NOCSR_BCR>; - reset-names = "phy", "common", "cfg"; - status = "disabled"; - - pciephy_0: lane@35000 { - reg = <0x035000 0x130>, - <0x035200 0x200>, - <0x035400 0x1dc>; - #phy-cells = <0>; - - clock-output-names = "pcie_0_pipe_clk_src"; - clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; - clock-names = "pipe0"; - resets = <&gcc GCC_PCIE_0_PHY_BCR>; - reset-names = "lane0"; - }; - - pciephy_1: lane@36000 { - reg = <0x036000 0x130>, - <0x036200 0x200>, - <0x036400 0x1dc>; - #phy-cells = <0>; - - clock-output-names = "pcie_1_pipe_clk_src"; - clocks = <&gcc GCC_PCIE_1_PIPE_CLK>; - clock-names = "pipe1"; - resets = <&gcc GCC_PCIE_1_PHY_BCR>; - reset-names = "lane1"; - }; - - pciephy_2: lane@37000 { - reg = <0x037000 0x130>, - <0x037200 0x200>, - <0x037400 0x1dc>; - #phy-cells = <0>; - - clock-output-names = "pcie_2_pipe_clk_src"; - clocks = <&gcc GCC_PCIE_2_PIPE_CLK>; - clock-names = "pipe2"; - resets = <&gcc GCC_PCIE_2_PHY_BCR>; - reset-names = "lane2"; - }; - }; - - phy@7410000 { - compatible = "qcom,msm8996-qmp-usb3-phy"; - reg = <0x7410000 0x1c4>; - #clock-cells = <1>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - clocks = <&gcc GCC_USB3_PHY_AUX_CLK>, - <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, - <&gcc GCC_USB3_CLKREF_CLK>; - clock-names = "aux", "cfg_ahb", "ref"; - - vdda-phy-supply = <&pm8994_l28>; - vdda-pll-supply = <&pm8994_l12>; - - resets = <&gcc GCC_USB3_PHY_BCR>, - <&gcc GCC_USB3PHY_PHY_BCR>; - reset-names = "phy", "common"; - status = "disabled"; - - ssusb_phy_0: lane@7410200 { - reg = <0x7410200 0x200>, - <0x7410400 0x130>, - <0x7410600 0x1a8>; - #phy-cells = <0>; - - clock-output-names = "usb3_phy_pipe_clk_src"; - clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>; - clock-names = "pipe0"; - }; - }; - - hsusb_phy1: phy@7411000 { - compatible = "qcom,msm8996-qusb2-phy"; - reg = <0x7411000 0x180>; - #phy-cells = <0>; - - clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, - <&gcc GCC_RX1_USB2_CLKREF_CLK>; - clock-names = "cfg_ahb", "ref"; - - vdda-pll-supply = <&pm8994_l12>; - vdda-phy-dpdm-supply = <&pm8994_l24>; - - resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; - nvmem-cells = <&qusb2p_hstx_trim>; - status = "disabled"; - }; - - hsusb_phy2: phy@7412000 { - compatible = "qcom,msm8996-qusb2-phy"; - reg = <0x7412000 0x180>; - #phy-cells = <0>; - - clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, - <&gcc GCC_RX2_USB2_CLKREF_CLK>; - clock-names = "cfg_ahb", "ref"; - - vdda-pll-supply = <&pm8994_l12>; - vdda-phy-dpdm-supply = <&pm8994_l24>; - - resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; - nvmem-cells = <&qusb2s_hstx_trim>; - status = "disabled"; - }; - usb2: usb@76f8800 { compatible = "qcom,msm8996-dwc3", "qcom,dwc3"; - reg = <0x76f8800 0x400>; + reg = <0x076f8800 0x400>; #address-cells = <1>; #size-cells = <1>; ranges; @@ -1598,424 +1930,19 @@ dwc3@7600000 { compatible = "snps,dwc3"; - reg = <0x7600000 0xcc00>; + reg = <0x07600000 0xcc00>; interrupts = <0 138 IRQ_TYPE_LEVEL_HIGH>; phys = <&hsusb_phy2>; phy-names = "usb2-phy"; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; }; }; - usb3: usb@6af8800 { - compatible = "qcom,msm8996-dwc3", "qcom,dwc3"; - reg = <0x6af8800 0x400>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - clocks = <&gcc GCC_SYS_NOC_USB3_AXI_CLK>, - <&gcc GCC_USB30_MASTER_CLK>, - <&gcc GCC_AGGRE2_USB3_AXI_CLK>, - <&gcc GCC_USB30_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_SLEEP_CLK>, - <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>; - - assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_MASTER_CLK>; - assigned-clock-rates = <19200000>, <120000000>; - - power-domains = <&gcc USB30_GDSC>; - status = "disabled"; - - dwc3@6a00000 { - compatible = "snps,dwc3"; - reg = <0x6a00000 0xcc00>; - interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>; - phys = <&hsusb_phy1>, <&ssusb_phy_0>; - phy-names = "usb2-phy", "usb3-phy"; - }; - }; - - vfe_smmu: iommu@da0000 { - compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; - reg = <0xda0000 0x10000>; - - #global-interrupts = <1>; - interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>; - power-domains = <&mmcc MMAGIC_CAMSS_GDSC>; - clocks = <&mmcc SMMU_VFE_AHB_CLK>, - <&mmcc SMMU_VFE_AXI_CLK>; - clock-names = "iface", - "bus"; - #iommu-cells = <1>; - }; - - camss: camss@a00000 { - compatible = "qcom,msm8996-camss"; - reg = <0xa34000 0x1000>, - <0xa00030 0x4>, - <0xa35000 0x1000>, - <0xa00038 0x4>, - <0xa36000 0x1000>, - <0xa00040 0x4>, - <0xa30000 0x100>, - <0xa30400 0x100>, - <0xa30800 0x100>, - <0xa30c00 0x100>, - <0xa31000 0x500>, - <0xa00020 0x10>, - <0xa10000 0x1000>, - <0xa14000 0x1000>; - reg-names = "csiphy0", - "csiphy0_clk_mux", - "csiphy1", - "csiphy1_clk_mux", - "csiphy2", - "csiphy2_clk_mux", - "csid0", - "csid1", - "csid2", - "csid3", - "ispif", - "csi_clk_mux", - "vfe0", - "vfe1"; - interrupts = <GIC_SPI 78 0>, - <GIC_SPI 79 0>, - <GIC_SPI 80 0>, - <GIC_SPI 296 0>, - <GIC_SPI 297 0>, - <GIC_SPI 298 0>, - <GIC_SPI 299 0>, - <GIC_SPI 309 0>, - <GIC_SPI 314 0>, - <GIC_SPI 315 0>; - interrupt-names = "csiphy0", - "csiphy1", - "csiphy2", - "csid0", - "csid1", - "csid2", - "csid3", - "ispif", - "vfe0", - "vfe1"; - power-domains = <&mmcc VFE0_GDSC>; - clocks = <&mmcc CAMSS_TOP_AHB_CLK>, - <&mmcc CAMSS_ISPIF_AHB_CLK>, - <&mmcc CAMSS_CSI0PHYTIMER_CLK>, - <&mmcc CAMSS_CSI1PHYTIMER_CLK>, - <&mmcc CAMSS_CSI2PHYTIMER_CLK>, - <&mmcc CAMSS_CSI0_AHB_CLK>, - <&mmcc CAMSS_CSI0_CLK>, - <&mmcc CAMSS_CSI0PHY_CLK>, - <&mmcc CAMSS_CSI0PIX_CLK>, - <&mmcc CAMSS_CSI0RDI_CLK>, - <&mmcc CAMSS_CSI1_AHB_CLK>, - <&mmcc CAMSS_CSI1_CLK>, - <&mmcc CAMSS_CSI1PHY_CLK>, - <&mmcc CAMSS_CSI1PIX_CLK>, - <&mmcc CAMSS_CSI1RDI_CLK>, - <&mmcc CAMSS_CSI2_AHB_CLK>, - <&mmcc CAMSS_CSI2_CLK>, - <&mmcc CAMSS_CSI2PHY_CLK>, - <&mmcc CAMSS_CSI2PIX_CLK>, - <&mmcc CAMSS_CSI2RDI_CLK>, - <&mmcc CAMSS_CSI3_AHB_CLK>, - <&mmcc CAMSS_CSI3_CLK>, - <&mmcc CAMSS_CSI3PHY_CLK>, - <&mmcc CAMSS_CSI3PIX_CLK>, - <&mmcc CAMSS_CSI3RDI_CLK>, - <&mmcc CAMSS_AHB_CLK>, - <&mmcc CAMSS_VFE0_CLK>, - <&mmcc CAMSS_CSI_VFE0_CLK>, - <&mmcc CAMSS_VFE0_AHB_CLK>, - <&mmcc CAMSS_VFE0_STREAM_CLK>, - <&mmcc CAMSS_VFE1_CLK>, - <&mmcc CAMSS_CSI_VFE1_CLK>, - <&mmcc CAMSS_VFE1_AHB_CLK>, - <&mmcc CAMSS_VFE1_STREAM_CLK>, - <&mmcc CAMSS_VFE_AHB_CLK>, - <&mmcc CAMSS_VFE_AXI_CLK>; - clock-names = "top_ahb", - "ispif_ahb", - "csiphy0_timer", - "csiphy1_timer", - "csiphy2_timer", - "csi0_ahb", - "csi0", - "csi0_phy", - "csi0_pix", - "csi0_rdi", - "csi1_ahb", - "csi1", - "csi1_phy", - "csi1_pix", - "csi1_rdi", - "csi2_ahb", - "csi2", - "csi2_phy", - "csi2_pix", - "csi2_rdi", - "csi3_ahb", - "csi3", - "csi3_phy", - "csi3_pix", - "csi3_rdi", - "ahb", - "vfe0", - "csi_vfe0", - "vfe0_ahb", - "vfe0_stream", - "vfe1", - "csi_vfe1", - "vfe1_ahb", - "vfe1_stream", - "vfe_ahb", - "vfe_axi"; - vdda-supply = <&pm8994_l2>; - iommus = <&vfe_smmu 0>, - <&vfe_smmu 1>, - <&vfe_smmu 2>, - <&vfe_smmu 3>; - status = "disabled"; - ports { - #address-cells = <1>; - #size-cells = <0>; - }; - }; - - adreno_smmu: iommu@b40000 { - compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; - reg = <0xb40000 0x10000>; - - #global-interrupts = <1>; - interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>; - #iommu-cells = <1>; - - clocks = <&mmcc GPU_AHB_CLK>, - <&gcc GCC_MMSS_BIMC_GFX_CLK>; - clock-names = "iface", "bus"; - - power-domains = <&mmcc GPU_GDSC>; - }; - - mdp_smmu: iommu@d00000 { - compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; - reg = <0xd00000 0x10000>; - - #global-interrupts = <1>; - interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>; - #iommu-cells = <1>; - clocks = <&mmcc SMMU_MDP_AHB_CLK>, - <&mmcc SMMU_MDP_AXI_CLK>; - clock-names = "iface", "bus"; - - power-domains = <&mmcc MDSS_GDSC>; - }; - - lpass_q6_smmu: iommu@1600000 { - compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; - reg = <0x1600000 0x20000>; - #iommu-cells = <1>; - power-domains = <&gcc HLOS1_VOTE_LPASS_CORE_GDSC>; - - #global-interrupts = <1>; - interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>; - - clocks = <&gcc GCC_HLOS1_VOTE_LPASS_CORE_SMMU_CLK>, - <&gcc GCC_HLOS1_VOTE_LPASS_ADSP_SMMU_CLK>; - clock-names = "iface", "bus"; - }; - - agnoc@0 { - power-domains = <&gcc AGGRE0_NOC_GDSC>; - compatible = "simple-pm-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - pcie0: pcie@600000 { - compatible = "qcom,pcie-msm8996", "snps,dw-pcie"; - status = "disabled"; - power-domains = <&gcc PCIE0_GDSC>; - bus-range = <0x00 0xff>; - num-lanes = <1>; - - reg = <0x00600000 0x2000>, - <0x0c000000 0xf1d>, - <0x0c000f20 0xa8>, - <0x0c100000 0x100000>; - reg-names = "parf", "dbi", "elbi","config"; - - phys = <&pciephy_0>; - phy-names = "pciephy"; - - #address-cells = <3>; - #size-cells = <2>; - ranges = <0x01000000 0x0 0x0c200000 0x0c200000 0x0 0x100000>, - <0x02000000 0x0 0x0c300000 0x0c300000 0x0 0xd00000>; - - interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi"; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ - <0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ - <0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ - <0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&pcie0_clkreq_default &pcie0_perst_default &pcie0_wake_default>; - pinctrl-1 = <&pcie0_clkreq_sleep &pcie0_perst_default &pcie0_wake_sleep>; - - - vdda-supply = <&pm8994_l28>; - - linux,pci-domain = <0>; - - clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, - <&gcc GCC_PCIE_0_AUX_CLK>, - <&gcc GCC_PCIE_0_CFG_AHB_CLK>, - <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, - <&gcc GCC_PCIE_0_SLV_AXI_CLK>; - - clock-names = "pipe", - "aux", - "cfg", - "bus_master", - "bus_slave"; - - }; - - pcie1: pcie@608000 { - compatible = "qcom,pcie-msm8996", "snps,dw-pcie"; - power-domains = <&gcc PCIE1_GDSC>; - bus-range = <0x00 0xff>; - num-lanes = <1>; - - status = "disabled"; - - reg = <0x00608000 0x2000>, - <0x0d000000 0xf1d>, - <0x0d000f20 0xa8>, - <0x0d100000 0x100000>; - - reg-names = "parf", "dbi", "elbi","config"; - - phys = <&pciephy_1>; - phy-names = "pciephy"; - - #address-cells = <3>; - #size-cells = <2>; - ranges = <0x01000000 0x0 0x0d200000 0x0d200000 0x0 0x100000>, - <0x02000000 0x0 0x0d300000 0x0d300000 0x0 0xd00000>; - - interrupts = <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi"; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 272 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ - <0 0 0 2 &intc 0 273 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ - <0 0 0 3 &intc 0 274 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ - <0 0 0 4 &intc 0 275 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&pcie1_clkreq_default &pcie1_perst_default &pcie1_wake_default>; - pinctrl-1 = <&pcie1_clkreq_sleep &pcie1_perst_default &pcie1_wake_sleep>; - - - vdda-supply = <&pm8994_l28>; - linux,pci-domain = <1>; - - clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, - <&gcc GCC_PCIE_1_AUX_CLK>, - <&gcc GCC_PCIE_1_CFG_AHB_CLK>, - <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, - <&gcc GCC_PCIE_1_SLV_AXI_CLK>; - - clock-names = "pipe", - "aux", - "cfg", - "bus_master", - "bus_slave"; - }; - - pcie2: pcie@610000 { - compatible = "qcom,pcie-msm8996", "snps,dw-pcie"; - power-domains = <&gcc PCIE2_GDSC>; - bus-range = <0x00 0xff>; - num-lanes = <1>; - status = "disabled"; - reg = <0x00610000 0x2000>, - <0x0e000000 0xf1d>, - <0x0e000f20 0xa8>, - <0x0e100000 0x100000>; - - reg-names = "parf", "dbi", "elbi","config"; - - phys = <&pciephy_2>; - phy-names = "pciephy"; - - #address-cells = <3>; - #size-cells = <2>; - ranges = <0x01000000 0x0 0x0e200000 0x0e200000 0x0 0x100000>, - <0x02000000 0x0 0x0e300000 0x0e300000 0x0 0x1d00000>; - - device_type = "pci"; - - interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi"; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ - <0 0 0 2 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ - <0 0 0 3 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ - <0 0 0 4 &intc 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&pcie2_clkreq_default &pcie2_perst_default &pcie2_wake_default>; - pinctrl-1 = <&pcie2_clkreq_sleep &pcie2_perst_default &pcie2_wake_sleep >; - - vdda-supply = <&pm8994_l28>; - - linux,pci-domain = <2>; - clocks = <&gcc GCC_PCIE_2_PIPE_CLK>, - <&gcc GCC_PCIE_2_AUX_CLK>, - <&gcc GCC_PCIE_2_CFG_AHB_CLK>, - <&gcc GCC_PCIE_2_MSTR_AXI_CLK>, - <&gcc GCC_PCIE_2_SLV_AXI_CLK>; - - clock-names = "pipe", - "aux", - "cfg", - "bus_master", - "bus_slave"; - }; - }; - - slimbam:dma@9184000 - { + slimbam: dma@9184000 { compatible = "qcom,bam-v1.7.0"; qcom,controlled-remotely; - reg = <0x9184000 0x32000>; + reg = <0x09184000 0x32000>; num-channels = <31>; interrupts = <0 164 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; @@ -2025,7 +1952,7 @@ slim_msm: slim@91c0000 { compatible = "qcom,slim-ngd-v1.5.0"; - reg = <0x91c0000 0x2C000>; + reg = <0x091c0000 0x2C000>; reg-names = "ctrl"; interrupts = <0 163 IRQ_TYPE_LEVEL_HIGH>; dmas = <&slimbam 3>, <&slimbam 4>, @@ -2060,433 +1987,418 @@ slim-ifc-dev = <&tasha_ifd>; - vdd-buck-supply = <&pm8994_s4>; - vdd-buck-sido-supply = <&pm8994_s4>; - vdd-tx-supply = <&pm8994_s4>; - vdd-rx-supply = <&pm8994_s4>; - vdd-io-supply = <&pm8994_s4>; - #sound-dai-cells = <1>; }; }; }; - gpu@b00000 { - compatible = "qcom,adreno-530.2", "qcom,adreno"; - #stream-id-cells = <16>; + adsp_pil: remoteproc@9300000 { + compatible = "qcom,msm8996-adsp-pil"; + reg = <0x09300000 0x80000>; - reg = <0xb00000 0x3f000>; - reg-names = "kgsl_3d0_reg_memory"; + interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; - interrupts = <0 300 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&xo_board>; + clock-names = "xo"; - clocks = <&mmcc GPU_GX_GFX3D_CLK>, - <&mmcc GPU_AHB_CLK>, - <&mmcc GPU_GX_RBBMTIMER_CLK>, - <&gcc GCC_BIMC_GFX_CLK>, - <&gcc GCC_MMSS_BIMC_GFX_CLK>; + memory-region = <&adsp_region>; - clock-names = "core", - "iface", - "rbbmtimer", - "mem", - "mem_iface"; + qcom,smem-states = <&smp2p_adsp_out 0>; + qcom,smem-state-names = "stop"; - power-domains = <&mmcc GPU_GDSC>; - iommus = <&adreno_smmu 0>; + smd-edge { + interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>; - nvmem-cells = <&gpu_speed_bin>; - nvmem-cell-names = "speed_bin"; + label = "lpass"; + mboxes = <&apcs_glb 8>; + qcom,smd-edge = <1>; + qcom,remote-pid = <2>; + #address-cells = <1>; + #size-cells = <0>; + apr { + power-domains = <&gcc HLOS1_VOTE_LPASS_ADSP_GDSC>; + compatible = "qcom,apr-v2"; + qcom,smd-channels = "apr_audio_svc"; + qcom,apr-domain = <APR_DOMAIN_ADSP>; + #address-cells = <1>; + #size-cells = <0>; - qcom,gpu-quirk-two-pass-use-wfi; - qcom,gpu-quirk-fault-detect-mask; + q6core { + reg = <APR_SVC_ADSP_CORE>; + compatible = "qcom,q6core"; + }; - operating-points-v2 = <&gpu_opp_table>; + q6afe: q6afe { + compatible = "qcom,q6afe"; + reg = <APR_SVC_AFE>; + q6afedai: dais { + compatible = "qcom,q6afe-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + hdmi@1 { + reg = <1>; + }; + }; + }; - gpu_opp_table: opp-table { - compatible ="operating-points-v2"; + q6asm: q6asm { + compatible = "qcom,q6asm"; + reg = <APR_SVC_ASM>; + q6asmdai: dais { + compatible = "qcom,q6asm-dais"; + #sound-dai-cells = <1>; + iommus = <&lpass_q6_smmu 1>; + }; + }; - /* - * 624Mhz and 560Mhz are only available on speed - * bin (1 << 0). All the rest are available on - * all bins of the hardware - */ - opp-624000000 { - opp-hz = /bits/ 64 <624000000>; - opp-supported-hw = <0x01>; - }; - opp-560000000 { - opp-hz = /bits/ 64 <560000000>; - opp-supported-hw = <0x01>; - }; - opp-510000000 { - opp-hz = /bits/ 64 <510000000>; - opp-supported-hw = <0xFF>; - }; - opp-401800000 { - opp-hz = /bits/ 64 <401800000>; - opp-supported-hw = <0xFF>; - }; - opp-315000000 { - opp-hz = /bits/ 64 <315000000>; - opp-supported-hw = <0xFF>; - }; - opp-214000000 { - opp-hz = /bits/ 64 <214000000>; - opp-supported-hw = <0xFF>; - }; - opp-133000000 { - opp-hz = /bits/ 64 <133000000>; - opp-supported-hw = <0xFF>; + q6adm: q6adm { + compatible = "qcom,q6adm"; + reg = <APR_SVC_ADM>; + q6routing: routing { + compatible = "qcom,q6adm-routing"; + #sound-dai-cells = <0>; + }; + }; }; - }; - zap-shader { - memory-region = <&zap_shader_region>; }; }; - mdss: mdss@900000 { - compatible = "qcom,mdss"; - - reg = <0x900000 0x1000>, - <0x9b0000 0x1040>, - <0x9b8000 0x1040>; - reg-names = "mdss_phys", - "vbif_phys", - "vbif_nrt_phys"; - - power-domains = <&mmcc MDSS_GDSC>; - interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; - - interrupt-controller; - #interrupt-cells = <1>; + apcs_glb: mailbox@9820000 { + compatible = "qcom,msm8996-apcs-hmss-global"; + reg = <0x09820000 0x1000>; - clocks = <&mmcc MDSS_AHB_CLK>; - clock-names = "iface"; + #mbox-cells = <1>; + }; + timer@9840000 { #address-cells = <1>; #size-cells = <1>; ranges; + compatible = "arm,armv7-timer-mem"; + reg = <0x09840000 0x1000>; + clock-frequency = <19200000>; - mdp: mdp@901000 { - compatible = "qcom,mdp5"; - reg = <0x901000 0x90000>; - reg-names = "mdp_phys"; + frame@9850000 { + frame-number = <0>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x09850000 0x1000>, + <0x09860000 0x1000>; + }; - interrupt-parent = <&mdss>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + frame@9870000 { + frame-number = <1>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x09870000 0x1000>; + status = "disabled"; + }; - clocks = <&mmcc MDSS_AHB_CLK>, - <&mmcc MDSS_AXI_CLK>, - <&mmcc MDSS_MDP_CLK>, - <&mmcc SMMU_MDP_AXI_CLK>, - <&mmcc MDSS_VSYNC_CLK>; - clock-names = "iface", - "bus", - "core", - "iommu", - "vsync"; + frame@9880000 { + frame-number = <2>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x09880000 0x1000>; + status = "disabled"; + }; - iommus = <&mdp_smmu 0>; + frame@9890000 { + frame-number = <3>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x09890000 0x1000>; + status = "disabled"; + }; - ports { - #address-cells = <1>; - #size-cells = <0>; + frame@98a0000 { + frame-number = <4>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x098a0000 0x1000>; + status = "disabled"; + }; - port@0 { - reg = <0>; - mdp5_intf3_out: endpoint { - remote-endpoint = <&hdmi_in>; - }; - }; - }; + frame@98b0000 { + frame-number = <5>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x098b0000 0x1000>; + status = "disabled"; }; - hdmi: hdmi-tx@9a0000 { - compatible = "qcom,hdmi-tx-8996"; - reg = <0x009a0000 0x50c>, - <0x00070000 0x6158>, - <0x009e0000 0xfff>; - reg-names = "core_physical", - "qfprom_physical", - "hdcp_physical"; + frame@98c0000 { + frame-number = <6>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x098c0000 0x1000>; + status = "disabled"; + }; + }; - interrupt-parent = <&mdss>; - interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + saw3: syscon@9a10000 { + compatible = "syscon"; + reg = <0x09a10000 0x1000>; + }; - clocks = <&mmcc MDSS_MDP_CLK>, - <&mmcc MDSS_AHB_CLK>, - <&mmcc MDSS_HDMI_CLK>, - <&mmcc MDSS_HDMI_AHB_CLK>, - <&mmcc MDSS_EXTPCLK_CLK>; - clock-names = - "mdp_core", - "iface", - "core", - "alt_iface", - "extp"; + intc: interrupt-controller@9bc0000 { + compatible = "qcom,msm8996-gic-v3", "arm,gic-v3"; + #interrupt-cells = <3>; + interrupt-controller; + #redistributor-regions = <1>; + redistributor-stride = <0x0 0x40000>; + reg = <0x09bc0000 0x10000>, + <0x09c00000 0x100000>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + }; - phys = <&hdmi_phy>; - phy-names = "hdmi_phy"; - #sound-dai-cells = <1>; + sound: sound { + }; - ports { - #address-cells = <1>; - #size-cells = <0>; + thermal-zones { + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; - port@0 { - reg = <0>; - hdmi_in: endpoint { - remote-endpoint = <&mdp5_intf3_out>; - }; - }; - }; - }; + thermal-sensors = <&tsens0 3>; - hdmi_phy: hdmi-phy@9a0600 { - #phy-cells = <0>; - compatible = "qcom,hdmi-phy-8996"; - reg = <0x9a0600 0x1c4>, - <0x9a0a00 0x124>, - <0x9a0c00 0x124>, - <0x9a0e00 0x124>, - <0x9a1000 0x124>, - <0x9a1200 0x0c8>; - reg-names = "hdmi_pll", - "hdmi_tx_l0", - "hdmi_tx_l1", - "hdmi_tx_l2", - "hdmi_tx_l3", - "hdmi_phy"; + trips { + cpu0_alert0: trip-point@0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; - clocks = <&mmcc MDSS_AHB_CLK>, - <&gcc GCC_HDMI_CLKREF_CLK>; - clock-names = "iface", - "ref"; + cpu0_crit: cpu_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; }; }; - venus_smmu: arm,smmu-venus@d40000 { - compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; - reg = <0xd40000 0x20000>; - #global-interrupts = <1>; - interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>; - power-domains = <&mmcc MMAGIC_VIDEO_GDSC>; - clocks = <&mmcc SMMU_VIDEO_AHB_CLK>, - <&mmcc SMMU_VIDEO_AXI_CLK>; - clock-names = "iface", "bus"; - #iommu-cells = <1>; - status = "okay"; - }; + cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; - video-codec@c00000 { - compatible = "qcom,msm8996-venus"; - reg = <0x00c00000 0xff000>; - interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; - power-domains = <&mmcc VENUS_GDSC>; - clocks = <&mmcc VIDEO_CORE_CLK>, - <&mmcc VIDEO_AHB_CLK>, - <&mmcc VIDEO_AXI_CLK>, - <&mmcc VIDEO_MAXI_CLK>; - clock-names = "core", "iface", "bus", "mbus"; - iommus = <&venus_smmu 0x00>, - <&venus_smmu 0x01>, - <&venus_smmu 0x0a>, - <&venus_smmu 0x07>, - <&venus_smmu 0x0e>, - <&venus_smmu 0x0f>, - <&venus_smmu 0x08>, - <&venus_smmu 0x09>, - <&venus_smmu 0x0b>, - <&venus_smmu 0x0c>, - <&venus_smmu 0x0d>, - <&venus_smmu 0x10>, - <&venus_smmu 0x11>, - <&venus_smmu 0x21>, - <&venus_smmu 0x28>, - <&venus_smmu 0x29>, - <&venus_smmu 0x2b>, - <&venus_smmu 0x2c>, - <&venus_smmu 0x2d>, - <&venus_smmu 0x31>; - memory-region = <&venus_region>; - status = "okay"; + thermal-sensors = <&tsens0 5>; - video-decoder { - compatible = "venus-decoder"; - clocks = <&mmcc VIDEO_SUBCORE0_CLK>; - clock-names = "core"; - power-domains = <&mmcc VENUS_CORE0_GDSC>; - }; + trips { + cpu1_alert0: trip-point@0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; - video-encoder { - compatible = "venus-encoder"; - clocks = <&mmcc VIDEO_SUBCORE1_CLK>; - clock-names = "core"; - power-domains = <&mmcc VENUS_CORE1_GDSC>; + cpu1_crit: cpu_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; }; }; - }; - - sound: sound { - }; - - adsp-pil { - compatible = "qcom,msm8996-adsp-pil"; - interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", "fatal", "ready", - "handover", "stop-ack"; + cpu2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; - clocks = <&xo_board>; - clock-names = "xo"; + thermal-sensors = <&tsens0 8>; - memory-region = <&adsp_region>; + trips { + cpu2_alert0: trip-point@0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; - qcom,smem-states = <&adsp_smp2p_out 0>; - qcom,smem-state-names = "stop"; + cpu2_crit: cpu_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; - smd-edge { - interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>; + cpu3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; - label = "lpass"; - mboxes = <&apcs_glb 8>; - qcom,smd-edge = <1>; - qcom,remote-pid = <2>; - #address-cells = <1>; - #size-cells = <0>; - apr { - power-domains = <&gcc HLOS1_VOTE_LPASS_ADSP_GDSC>; - compatible = "qcom,apr-v2"; - qcom,smd-channels = "apr_audio_svc"; - qcom,apr-domain = <APR_DOMAIN_ADSP>; - #address-cells = <1>; - #size-cells = <0>; + thermal-sensors = <&tsens0 10>; - q6core { - reg = <APR_SVC_ADSP_CORE>; - compatible = "qcom,q6core"; - }; - - q6afe: q6afe { - compatible = "qcom,q6afe"; - reg = <APR_SVC_AFE>; - q6afedai: dais { - compatible = "qcom,q6afe-dais"; - #address-cells = <1>; - #size-cells = <0>; - #sound-dai-cells = <1>; - hdmi@1 { - reg = <1>; - }; - }; + trips { + cpu3_alert0: trip-point@0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; }; - q6asm: q6asm { - compatible = "qcom,q6asm"; - reg = <APR_SVC_ASM>; - q6asmdai: dais { - compatible = "qcom,q6asm-dais"; - #sound-dai-cells = <1>; - iommus = <&lpass_q6_smmu 1>; - }; + cpu3_crit: cpu_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; }; + }; + }; - q6adm: q6adm { - compatible = "qcom,q6adm"; - reg = <APR_SVC_ADM>; - q6routing: routing { - compatible = "qcom,q6adm-routing"; - #sound-dai-cells = <0>; - }; + gpu-thermal-top { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 6>; + + trips { + gpu1_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; }; }; - }; - }; - adsp-smp2p { - compatible = "qcom,smp2p"; - qcom,smem = <443>, <429>; + gpu-thermal-bottom { + polling-delay-passive = <250>; + polling-delay = <1000>; - interrupts = <0 158 IRQ_TYPE_EDGE_RISING>; + thermal-sensors = <&tsens1 7>; - mboxes = <&apcs_glb 10>; + trips { + gpu2_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; - qcom,local-pid = <0>; - qcom,remote-pid = <2>; + m4m-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; - adsp_smp2p_out: master-kernel { - qcom,entry-name = "master-kernel"; - #qcom,smem-state-cells = <1>; + thermal-sensors = <&tsens0 1>; + + trips { + m4m_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; }; - adsp_smp2p_in: slave-kernel { - qcom,entry-name = "slave-kernel"; + l3-or-venus-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; - interrupt-controller; - #interrupt-cells = <2>; + thermal-sensors = <&tsens0 2>; + + trips { + l3_or_venus_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; }; - }; - modem-smp2p { - compatible = "qcom,smp2p"; - qcom,smem = <435>, <428>; + cluster0-l2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; - interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>; + thermal-sensors = <&tsens0 7>; - mboxes = <&apcs_glb 14>; + trips { + cluster0_l2_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; - qcom,local-pid = <0>; - qcom,remote-pid = <1>; + cluster1-l2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; - modem_smp2p_out: master-kernel { - qcom,entry-name = "master-kernel"; - #qcom,smem-state-cells = <1>; + thermal-sensors = <&tsens0 12>; + + trips { + cluster1_l2_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; }; - modem_smp2p_in: slave-kernel { - qcom,entry-name = "slave-kernel"; + camera-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; - interrupt-controller; - #interrupt-cells = <2>; + thermal-sensors = <&tsens1 1>; + + trips { + camera_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; }; - }; - smp2p-slpi { - compatible = "qcom,smp2p"; - qcom,smem = <481>, <430>; + q6-dsp-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; - interrupts = <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>; + thermal-sensors = <&tsens1 2>; - mboxes = <&apcs_glb 26>; + trips { + q6_dsp_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; - qcom,local-pid = <0>; - qcom,remote-pid = <3>; + mem-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; - slpi_smp2p_in: slave-kernel { - qcom,entry-name = "slave-kernel"; - interrupt-controller; - #interrupt-cells = <2>; + thermal-sensors = <&tsens1 3>; + + trips { + mem_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; }; - slpi_smp2p_out: master-kernel { - qcom,entry-name = "master-kernel"; - #qcom,smem-state-cells = <1>; + modemtx-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 4>; + + trips { + modemtx_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; }; }; + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; + }; }; #include "msm8996-pins.dtsi" diff --git a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi index 6138b58db6d2..6ab830d01867 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi @@ -74,6 +74,23 @@ cpu-idle-states = <&BIG_CPU_SLEEP_1>; }; +&pm8005_lsid1 { + pm8005-regulators { + compatible = "qcom,pm8005-regulators"; + + vdd_s1-supply = <&vph_pwr>; + + pm8005_s1: s1 { /* VDD_GFX supply */ + regulator-min-microvolt = <524000>; + regulator-max-microvolt = <1100000>; + regulator-enable-ramp-delay = <500>; + + /* hack until we rig up the gpu consumer */ + regulator-always-on; + }; + }; +}; + &qusb2phy { status = "okay"; @@ -292,3 +309,35 @@ vdda-phy-supply = <&vreg_l1a_0p875>; vdda-pll-supply = <&vreg_l2a_1p2>; }; + +&wifi { + status = "okay"; + + vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; +}; + +/* PINCTRL - board-specific pinctrl */ +&blsp1_uart3_on { + rx { + /delete-property/ bias-disable; + /* + * Configure a pull-up on 45 (RX). This is needed to + * avoid garbage data when the TX pin of the Bluetooth + * module is in tri-state (module powered off or not + * driving the signal yet). + */ + bias-pull-up; + }; + + cts { + /delete-property/ bias-disable; + /* + * Configure a pull-down on 47 (CTS) to match the pull + * of the Bluetooth module. + */ + bias-pull-down; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi index 5f101a20a20a..0e0b9bc12945 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi @@ -9,6 +9,7 @@ / { aliases { serial0 = &blsp2_uart1; + serial1 = &blsp1_uart3; }; chosen { @@ -311,6 +312,14 @@ }; }; +&remoteproc_adsp { + status = "okay"; +}; + +&remoteproc_slpi { + status = "okay"; +}; + &tlmm { gpio-reserved-ranges = <0 4>, <81 4>; }; @@ -364,3 +373,35 @@ vdda-phy-supply = <&vreg_l1a_0p875>; vdda-pll-supply = <&vreg_l2a_1p2>; }; + +&wifi { + status = "okay"; + + vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; +}; + +/* PINCTRL - board-specific pinctrl */ +&blsp1_uart3_on { + rx { + /delete-property/ bias-disable; + /* + * Configure a pull-up on 45 (RX). This is needed to + * avoid garbage data when the TX pin of the Bluetooth + * module is in tri-state (module powered off or not + * driving the signal yet). + */ + bias-pull-up; + }; + + cts { + /delete-property/ bias-disable; + /* + * Configure a pull-down on 47 (CTS) to match the pull + * of the Bluetooth module. + */ + bias-pull-down; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8998-pins.dtsi index e32d3ab395ea..7c222cbf19d9 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-pins.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-pins.dtsi @@ -77,13 +77,30 @@ }; blsp1_uart3_on: blsp1_uart3_on { - mux { - pins = "gpio45", "gpio46", "gpio47", "gpio48"; + tx { + pins = "gpio45"; function = "blsp_uart3_a"; + drive-strength = <2>; + bias-disable; }; - config { - pins = "gpio45", "gpio46", "gpio47", "gpio48"; + rx { + pins = "gpio46"; + function = "blsp_uart3_a"; + drive-strength = <2>; + bias-disable; + }; + + cts { + pins = "gpio47"; + function = "blsp_uart3_a"; + drive-strength = <2>; + bias-disable; + }; + + rfr { + pins = "gpio48"; + function = "blsp_uart3_a"; drive-strength = <2>; bias-disable; }; diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index fc7838ea9a01..91f7f2d07597 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -3,6 +3,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-msm8998.h> +#include <dt-bindings/clock/qcom,gpucc-msm8998.h> #include <dt-bindings/clock/qcom,rpmcc.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/gpio/gpio.h> @@ -28,8 +29,13 @@ #size-cells = <2>; ranges; - memory@85800000 { - reg = <0x0 0x85800000 0x0 0x800000>; + hyp_mem: memory@85800000 { + reg = <0x0 0x85800000 0x0 0x600000>; + no-map; + }; + + xbl_mem: memory@85e00000 { + reg = <0x0 0x85e00000 0x0 0x100000>; no-map; }; @@ -38,21 +44,69 @@ no-map; }; - memory@86200000 { + tz_mem: memory@86200000 { reg = <0x0 0x86200000 0x0 0x2d00000>; no-map; }; - rmtfs { + rmtfs_mem: memory@88f00000 { compatible = "qcom,rmtfs-mem"; - - size = <0x0 0x200000>; - alloc-ranges = <0x0 0xa0000000 0x0 0x2000000>; + reg = <0x0 0x88f00000 0x0 0x200000>; no-map; qcom,client-id = <1>; qcom,vmid = <15>; }; + + spss_mem: memory@8ab00000 { + reg = <0x0 0x8ab00000 0x0 0x700000>; + no-map; + }; + + adsp_mem: memory@8b200000 { + reg = <0x0 0x8b200000 0x0 0x1a00000>; + no-map; + }; + + mpss_mem: memory@8cc00000 { + reg = <0x0 0x8cc00000 0x0 0x7000000>; + no-map; + }; + + venus_mem: memory@93c00000 { + reg = <0x0 0x93c00000 0x0 0x500000>; + no-map; + }; + + mba_mem: memory@94100000 { + reg = <0x0 0x94100000 0x0 0x200000>; + no-map; + }; + + slpi_mem: memory@94300000 { + reg = <0x0 0x94300000 0x0 0xf00000>; + no-map; + }; + + ipa_fw_mem: memory@95200000 { + reg = <0x0 0x95200000 0x0 0x10000>; + no-map; + }; + + ipa_gsi_mem: memory@95210000 { + reg = <0x0 0x95210000 0x0 0x5000>; + no-map; + }; + + gpu_mem: memory@95600000 { + reg = <0x0 0x95600000 0x0 0x100000>; + no-map; + }; + + wlan_msa_mem: memory@95700000 { + reg = <0x0 0x95700000 0x0 0x100000>; + no-map; + }; }; clocks { @@ -817,8 +871,9 @@ reg = <0x010ab000 0x1000>, /* TM */ <0x010aa000 0x1000>; /* SROT */ #qcom,sensors = <14>; - interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "uplow"; + interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; #thermal-sensor-cells = <1>; }; @@ -827,8 +882,9 @@ reg = <0x010ae000 0x1000>, /* TM */ <0x010ad000 0x1000>; /* SROT */ #qcom,sensors = <8>; - interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "uplow"; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; #thermal-sensor-cells = <1>; }; @@ -847,6 +903,25 @@ <GIC_SPI 369 IRQ_TYPE_EDGE_RISING>; }; + anoc2_smmu: iommu@16c0000 { + compatible = "qcom,msm8998-smmu-v2", "qcom,smmu-v2"; + reg = <0x016c0000 0x40000>; + #iommu-cells = <1>; + + #global-interrupts = <0>; + interrupts = + <GIC_SPI 373 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 374 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 375 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 376 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 377 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 378 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 462 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 463 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 464 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>; + }; + pcie0: pci@1c00000 { compatible = "qcom,pcie-msm8996"; reg = <0x01c00000 0x2000>, @@ -987,7 +1062,7 @@ tcsr_mutex_regs: syscon@1f40000 { compatible = "syscon"; - reg = <0x01f40000 0x20000>; + reg = <0x01f40000 0x40000>; }; tlmm: pinctrl@3400000 { @@ -1000,6 +1075,110 @@ #interrupt-cells = <0x2>; }; + remoteproc_mss: remoteproc@4080000 { + compatible = "qcom,msm8998-mss-pil"; + reg = <0x04080000 0x100>, <0x04180000 0x20>; + reg-names = "qdsp6", "rmb"; + + interrupts-extended = + <&intc GIC_SPI 448 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack", + "shutdown-ack"; + + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, + <&gcc GCC_BIMC_MSS_Q6_AXI_CLK>, + <&gcc GCC_BOOT_ROM_AHB_CLK>, + <&gcc GCC_MSS_GPLL0_DIV_CLK_SRC>, + <&gcc GCC_MSS_SNOC_AXI_CLK>, + <&gcc GCC_MSS_MNOC_BIMC_AXI_CLK>, + <&rpmcc RPM_SMD_QDSS_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "bus", "mem", "gpll0_mss", + "snoc_axi", "mnoc_axi", "qdss", "xo"; + + qcom,smem-states = <&modem_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + resets = <&gcc GCC_MSS_RESTART>; + reset-names = "mss_restart"; + + qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>; + + power-domains = <&rpmpd MSM8998_VDDCX>, + <&rpmpd MSM8998_VDDMX>; + power-domain-names = "cx", "mx"; + + mba { + memory-region = <&mba_mem>; + }; + + mpss { + memory-region = <&mpss_mem>; + }; + + glink-edge { + interrupts = <GIC_SPI 452 IRQ_TYPE_EDGE_RISING>; + label = "modem"; + qcom,remote-pid = <1>; + mboxes = <&apcs_glb 15>; + }; + }; + + gpucc: clock-controller@5065000 { + compatible = "qcom,msm8998-gpucc"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0x05065000 0x9000>; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&gcc GPLL0_OUT_MAIN>; + clock-names = "xo", + "gpll0"; + }; + + remoteproc_slpi: remoteproc@5800000 { + compatible = "qcom,msm8998-slpi-pas"; + reg = <0x05800000 0x4040>; + + interrupts-extended = <&intc GIC_SPI 390 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + px-supply = <&vreg_lvs2a_1p8>; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&rpmcc RPM_SMD_AGGR2_NOC_CLK>; + clock-names = "xo", "aggre2"; + + memory-region = <&slpi_mem>; + + qcom,smem-states = <&slpi_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + power-domains = <&rpmpd MSM8998_SSCCX>; + power-domain-names = "ssc_cx"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 179 IRQ_TYPE_EDGE_RISING>; + label = "dsps"; + qcom,remote-pid = <3>; + mboxes = <&apcs_glb 27>; + }; + }; + stm: stm@6002000 { compatible = "arm,coresight-stm", "arm,primecell"; reg = <0x06002000 0x1000>, @@ -1792,6 +1971,39 @@ #size-cells = <0>; }; + remoteproc_adsp: remoteproc@17300000 { + compatible = "qcom,msm8998-adsp-pas"; + reg = <0x17300000 0x4040>; + + interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "xo"; + + memory-region = <&adsp_mem>; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + power-domains = <&rpmpd MSM8998_VDDCX>; + power-domain-names = "cx"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>; + label = "lpass"; + qcom,remote-pid = <2>; + mboxes = <&apcs_glb 9>; + }; + }; + apcs_glb: mailbox@17911000 { compatible = "qcom,msm8998-apcs-hmss-global"; reg = <0x17911000 0x1000>; @@ -1870,6 +2082,32 @@ redistributor-stride = <0x0 0x20000>; interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; }; + + wifi: wifi@18800000 { + compatible = "qcom,wcn3990-wifi"; + status = "disabled"; + reg = <0x18800000 0x800000>; + reg-names = "membase"; + memory-region = <&wlan_msa_mem>; + clocks = <&rpmcc RPM_SMD_RF_CLK2_PIN>; + clock-names = "cxo_ref_clk_pin"; + interrupts = + <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&anoc2_smmu 0x1900>, + <&anoc2_smmu 0x1901>; + qcom,snoc-host-cap-8bit-quirk; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/pm6150.dtsi b/arch/arm64/boot/dts/qcom/pm6150.dtsi new file mode 100644 index 000000000000..23534639f455 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm6150.dtsi @@ -0,0 +1,72 @@ +// SPDX-License-Identifier: BSD-3-Clause +// Copyright (c) 2019, The Linux Foundation. All rights reserved. + +#include <dt-bindings/iio/qcom,spmi-vadc.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> +#include <dt-bindings/thermal/thermal.h> + +&spmi_bus { + pm6150_lsid0: pmic@0 { + compatible = "qcom,pm6150", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm6150_pon: pon@800 { + compatible = "qcom,pm8998-pon"; + reg = <0x800>; + mode-bootloader = <0x2>; + mode-recovery = <0x1>; + + pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_POWER>; + }; + }; + + pm6150_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>; + io-channels = <&pm6150_adc ADC5_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pm6150_adc: adc@3100 { + compatible = "qcom,spmi-adc5"; + reg = <0x3100>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + adc-chan@6 { + reg = <ADC5_DIE_TEMP>; + label = "die_temp"; + }; + }; + + pm6150_gpio: gpios@c000 { + compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pm6150_gpio 0 0 10>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pm6150_lsid1: pmic@1 { + compatible = "qcom,pm6150", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm6150l.dtsi b/arch/arm64/boot/dts/qcom/pm6150l.dtsi new file mode 100644 index 000000000000..f84027b505d1 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm6150l.dtsi @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: BSD-3-Clause +// Copyright (c) 2019, The Linux Foundation. All rights reserved. + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +&spmi_bus { + pm6150l_lsid4: pmic@4 { + compatible = "qcom,pm6150l", "qcom,spmi-pmic"; + reg = <0x4 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm6150l_gpio: gpios@c000 { + compatible = "qcom,pm6150l-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pm6150l_gpio 0 0 12>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pm6150l_lsid5: pmic@5 { + compatible = "qcom,pm6150l", "qcom,spmi-pmic"; + reg = <0x5 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm8004.dtsi b/arch/arm64/boot/dts/qcom/pm8004.dtsi index 297b57bfa87a..0abd1abe12fc 100644 --- a/arch/arm64/boot/dts/qcom/pm8004.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8004.dtsi @@ -4,17 +4,23 @@ &spmi_bus { - pmic@4 { + pm8004_lsid4: pmic@4 { compatible = "qcom,pm8004", "qcom,spmi-pmic"; reg = <0x4 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; + status = "disabled"; }; - pmic@5 { + pm8004_lsid5: pmic@5 { compatible = "qcom,pm8004", "qcom,spmi-pmic"; reg = <0x5 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; + status = "disabled"; + + pm8004_spmi_regulators: regulators { + compatible = "qcom,pm8004-regulators"; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi index 9dd2df1cbf47..0bcdf0471107 100644 --- a/arch/arm64/boot/dts/qcom/pm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi @@ -111,6 +111,12 @@ #address-cells = <1>; #size-cells = <0>; + pm8916_vib: vibrator@c000 { + compatible = "qcom,pm8916-vib"; + reg = <0xc000>; + status = "disabled"; + }; + wcd_codec: codec@f000 { compatible = "qcom,pm8916-wcd-analog-codec"; reg = <0xf000 0x200>; diff --git a/arch/arm64/boot/dts/qcom/pm8994.dtsi b/arch/arm64/boot/dts/qcom/pm8994.dtsi index 76b5a3e6a2b5..7e4f777746cb 100644 --- a/arch/arm64/boot/dts/qcom/pm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8994.dtsi @@ -85,5 +85,9 @@ reg = <0x1 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; + + pm8994_spmi_regulators: regulators { + compatible = "qcom,pm8994-regulators"; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi index 501a7330dbc8..522d3ef72df5 100644 --- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi @@ -73,6 +73,7 @@ regulator-always-on; regulator-boot-on; regulator-name = "vdd_apc"; + regulator-initial-mode = <1>; regulator-min-microvolt = <1048000>; regulator-max-microvolt = <1384000>; }; diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi index f5f0c4c9cb16..4ee1e3d5f123 100644 --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi @@ -42,6 +42,10 @@ cpu-idle-states = <&CPU_SLEEP_0>; next-level-cache = <&L2_0>; #cooling-cells = <2>; + clocks = <&apcs_glb>; + operating-points-v2 = <&cpu_opp_table>; + power-domains = <&cpr>; + power-domain-names = "cpr"; }; CPU1: cpu@101 { @@ -52,6 +56,10 @@ cpu-idle-states = <&CPU_SLEEP_0>; next-level-cache = <&L2_0>; #cooling-cells = <2>; + clocks = <&apcs_glb>; + operating-points-v2 = <&cpu_opp_table>; + power-domains = <&cpr>; + power-domain-names = "cpr"; }; CPU2: cpu@102 { @@ -62,6 +70,10 @@ cpu-idle-states = <&CPU_SLEEP_0>; next-level-cache = <&L2_0>; #cooling-cells = <2>; + clocks = <&apcs_glb>; + operating-points-v2 = <&cpu_opp_table>; + power-domains = <&cpr>; + power-domain-names = "cpr"; }; CPU3: cpu@103 { @@ -72,6 +84,10 @@ cpu-idle-states = <&CPU_SLEEP_0>; next-level-cache = <&L2_0>; #cooling-cells = <2>; + clocks = <&apcs_glb>; + operating-points-v2 = <&cpu_opp_table>; + power-domains = <&cpr>; + power-domain-names = "cpr"; }; L2_0: l2-cache { @@ -94,6 +110,41 @@ }; }; + cpu_opp_table: cpu-opp-table { + compatible = "operating-points-v2-kryo-cpu"; + opp-shared; + + opp-1094400000 { + opp-hz = /bits/ 64 <1094400000>; + required-opps = <&cpr_opp1>; + }; + opp-1248000000 { + opp-hz = /bits/ 64 <1248000000>; + required-opps = <&cpr_opp2>; + }; + opp-1401600000 { + opp-hz = /bits/ 64 <1401600000>; + required-opps = <&cpr_opp3>; + }; + }; + + cpr_opp_table: cpr-opp-table { + compatible = "operating-points-v2-qcom-level"; + + cpr_opp1: opp1 { + opp-level = <1>; + qcom,opp-fuse-level = <1>; + }; + cpr_opp2: opp2 { + opp-level = <2>; + qcom,opp-fuse-level = <2>; + }; + cpr_opp3: opp3 { + opp-level = <3>; + qcom,opp-fuse-level = <3>; + }; + }; + firmware { scm: scm { compatible = "qcom,scm-qcs404", "qcom,scm"; @@ -280,6 +331,62 @@ tsens_caldata: caldata@d0 { reg = <0x1f8 0x14>; }; + cpr_efuse_speedbin: speedbin@13c { + reg = <0x13c 0x4>; + bits = <2 3>; + }; + cpr_efuse_quot_offset1: qoffset1@231 { + reg = <0x231 0x4>; + bits = <4 7>; + }; + cpr_efuse_quot_offset2: qoffset2@232 { + reg = <0x232 0x4>; + bits = <3 7>; + }; + cpr_efuse_quot_offset3: qoffset3@233 { + reg = <0x233 0x4>; + bits = <2 7>; + }; + cpr_efuse_init_voltage1: ivoltage1@229 { + reg = <0x229 0x4>; + bits = <4 6>; + }; + cpr_efuse_init_voltage2: ivoltage2@22a { + reg = <0x22a 0x4>; + bits = <2 6>; + }; + cpr_efuse_init_voltage3: ivoltage3@22b { + reg = <0x22b 0x4>; + bits = <0 6>; + }; + cpr_efuse_quot1: quot1@22b { + reg = <0x22b 0x4>; + bits = <6 12>; + }; + cpr_efuse_quot2: quot2@22d { + reg = <0x22d 0x4>; + bits = <2 12>; + }; + cpr_efuse_quot3: quot3@230 { + reg = <0x230 0x4>; + bits = <0 12>; + }; + cpr_efuse_ring1: ring1@228 { + reg = <0x228 0x4>; + bits = <0 3>; + }; + cpr_efuse_ring2: ring2@228 { + reg = <0x228 0x4>; + bits = <4 3>; + }; + cpr_efuse_ring3: ring3@229 { + reg = <0x229 0x4>; + bits = <0 3>; + }; + cpr_efuse_revision: revision@218 { + reg = <0x218 0x4>; + bits = <3 3>; + }; }; rng: rng@e3000 { @@ -902,14 +1009,65 @@ compatible = "qcom,qcs404-apcs-apps-global", "syscon"; reg = <0x0b011000 0x1000>; #mbox-cells = <1>; + clocks = <&apcs_hfpll>, <&gcc GCC_GPLL0_AO_OUT_MAIN>; + clock-names = "pll", "aux"; + #clock-cells = <0>; + }; + + apcs_hfpll: clock-controller@b016000 { + compatible = "qcom,hfpll"; + reg = <0x0b016000 0x30>; + #clock-cells = <0>; + clock-output-names = "apcs_hfpll"; + clocks = <&xo_board>; + clock-names = "xo"; }; watchdog@b017000 { - compatible = "qcom,kpss-wdt"; + compatible = "qcom,apss-wdt-qcs404", "qcom,kpss-wdt"; reg = <0x0b017000 0x1000>; clocks = <&sleep_clk>; }; + cpr: power-controller@b018000 { + compatible = "qcom,qcs404-cpr", "qcom,cpr"; + reg = <0x0b018000 0x1000>; + interrupts = <0 15 IRQ_TYPE_EDGE_RISING>; + clocks = <&xo_board>; + clock-names = "ref"; + vdd-apc-supply = <&pms405_s3>; + #power-domain-cells = <0>; + operating-points-v2 = <&cpr_opp_table>; + acc-syscon = <&tcsr>; + + nvmem-cells = <&cpr_efuse_quot_offset1>, + <&cpr_efuse_quot_offset2>, + <&cpr_efuse_quot_offset3>, + <&cpr_efuse_init_voltage1>, + <&cpr_efuse_init_voltage2>, + <&cpr_efuse_init_voltage3>, + <&cpr_efuse_quot1>, + <&cpr_efuse_quot2>, + <&cpr_efuse_quot3>, + <&cpr_efuse_ring1>, + <&cpr_efuse_ring2>, + <&cpr_efuse_ring3>, + <&cpr_efuse_revision>; + nvmem-cell-names = "cpr_quotient_offset1", + "cpr_quotient_offset2", + "cpr_quotient_offset3", + "cpr_init_voltage1", + "cpr_init_voltage2", + "cpr_init_voltage3", + "cpr_quotient1", + "cpr_quotient2", + "cpr_quotient3", + "cpr_ring_osc1", + "cpr_ring_osc2", + "cpr_ring_osc3", + "cpr_fuse_revision"; + }; + timer@b120000 { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts new file mode 100644 index 000000000000..388f50ad4fde --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts @@ -0,0 +1,430 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * SC7180 IDP board device tree source + * + * Copyright (c) 2019, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sc7180.dtsi" +#include "pm6150.dtsi" +#include "pm6150l.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. SC7180 IDP"; + compatible = "qcom,sc7180-idp", "qcom,sc7180"; + + aliases { + hsuart0 = &uart3; + serial0 = &uart8; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&apps_rsc { + pm6150-rpmh-regulators { + compatible = "qcom,pm6150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vreg_s1a_1p1: smps1 { + regulator-min-microvolt = <1128000>; + regulator-max-microvolt = <1128000>; + }; + + vreg_s4a_1p0: smps4 { + regulator-min-microvolt = <824000>; + regulator-max-microvolt = <1120000>; + }; + + vreg_s5a_2p0: smps5 { + regulator-min-microvolt = <1744000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_l1a_1p2: ldo1 { + regulator-min-microvolt = <1178000>; + regulator-max-microvolt = <1256000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l2a_1p0: ldo2 { + regulator-min-microvolt = <944000>; + regulator-max-microvolt = <1056000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l3a_1p0: ldo3 { + regulator-min-microvolt = <968000>; + regulator-max-microvolt = <1064000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l4a_0p8: ldo4 { + regulator-min-microvolt = <824000>; + regulator-max-microvolt = <928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l5a_2p7: ldo5 { + regulator-min-microvolt = <2496000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l6a_0p6: ldo6 { + regulator-min-microvolt = <568000>; + regulator-max-microvolt = <648000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l9a_0p6: ldo9 { + regulator-min-microvolt = <488000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l10a_1p8: ldo10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1832000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l11a_1p8: ldo11 { + regulator-min-microvolt = <1696000>; + regulator-max-microvolt = <1904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1696000>; + regulator-max-microvolt = <1952000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l13a_1p8: ldo13 { + regulator-min-microvolt = <1696000>; + regulator-max-microvolt = <1904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l14a_1p8: ldo14 { + regulator-min-microvolt = <1728000>; + regulator-max-microvolt = <1832000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l15a_1p8: ldo15 { + regulator-min-microvolt = <1696000>; + regulator-max-microvolt = <1904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l16a_2p7: ldo16 { + regulator-min-microvolt = <2496000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l17a_3p0: ldo17 { + regulator-min-microvolt = <2920000>; + regulator-max-microvolt = <3232000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l18a_2p8: ldo18 { + regulator-min-microvolt = <2496000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l19a_2p9: ldo19 { + regulator-min-microvolt = <2696000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + }; + + pm6150l-rpmh-regulators { + compatible = "qcom,pm6150l-rpmh-regulators"; + qcom,pmic-id = "c"; + + vreg_s8c_1p3: smps8 { + regulator-min-microvolt = <1120000>; + regulator-max-microvolt = <1408000>; + }; + + vreg_l1c_1p8: ldo1 { + regulator-min-microvolt = <1616000>; + regulator-max-microvolt = <1984000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l2c_1p3: ldo2 { + regulator-min-microvolt = <1168000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l3c_1p2: ldo3 { + regulator-min-microvolt = <1144000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l4c_1p8: ldo4 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l5c_1p8: ldo5 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l6c_2p9: ldo6 { + regulator-min-microvolt = <2696000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l7c_3p0: ldo7 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l8c_1p8: ldo8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l9c_2p9: ldo9 { + regulator-min-microvolt = <2952000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l10c_3p3: ldo10 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3400000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l11c_3p3: ldo11 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3400000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_bob: bob { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + }; + }; +}; + +&qspi { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&qspi_clk &qspi_cs0 &qspi_data01>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + spi-tx-bus-width = <2>; + spi-rx-bus-width = <2>; + }; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&uart8 { + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "host"; +}; + +&usb_1_hsphy { + status = "okay"; + vdd-supply = <&vreg_l4a_0p8>; + vdda-pll-supply = <&vreg_l11a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l17a_3p0>; + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>; + qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>; + qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>; +}; + +&usb_1_qmpphy { + status = "okay"; + vdda-phy-supply = <&vreg_l3c_1p2>; + vdda-pll-supply = <&vreg_l4a_0p8>; +}; + +/* PINCTRL - additions to nodes defined in sc7180.dtsi */ + +&qspi_clk { + pinconf { + pins = "gpio63"; + bias-disable; + }; +}; + +&qspi_cs0 { + pinconf { + pins = "gpio68"; + bias-disable; + }; +}; + +&qspi_data01 { + pinconf { + pins = "gpio64", "gpio65"; + + /* High-Z when no transfers; nice to park the lines */ + bias-pull-up; + }; +}; + +&qup_i2c2_default { + pinconf { + pins = "gpio15", "gpio16"; + drive-strength = <2>; + + /* Has external pullup */ + bias-disable; + }; +}; + +&qup_i2c4_default { + pinconf { + pins = "gpio115", "gpio116"; + drive-strength = <2>; + + /* Has external pullup */ + bias-disable; + }; +}; + +&qup_i2c7_default { + pinconf { + pins = "gpio6", "gpio7"; + drive-strength = <2>; + + /* Has external pullup */ + bias-disable; + }; +}; + +&qup_i2c9_default { + pinconf { + pins = "gpio46", "gpio47"; + drive-strength = <2>; + + /* Has external pullup */ + bias-disable; + }; +}; + +&qup_uart3_default { + pinconf-cts { + /* + * Configure a pull-down on 38 (CTS) to match the pull of + * the Bluetooth module. + */ + pins = "gpio38"; + bias-pull-down; + output-high; + }; + + pinconf-rts { + /* We'll drive 39 (RTS), so no pull */ + pins = "gpio39"; + drive-strength = <2>; + bias-disable; + }; + + pinconf-tx { + /* We'll drive 40 (TX), so no pull */ + pins = "gpio40"; + drive-strength = <2>; + bias-disable; + output-high; + }; + + pinconf-rx { + /* + * Configure a pull-up on 41 (RX). This is needed to avoid + * garbage data when the TX pin of the Bluetooth module is + * in tri-state (module powered off or not driving the + * signal yet). + */ + pins = "gpio41"; + bias-pull-up; + }; +}; + +&qup_uart8_default { + pinconf-tx { + pins = "gpio44"; + drive-strength = <2>; + bias-disable; + }; + + pinconf-rx { + pins = "gpio45"; + drive-strength = <2>; + bias-pull-up; + }; +}; + +&qup_spi0_default { + pinconf { + pins = "gpio34", "gpio35", "gpio36", "gpio37"; + drive-strength = <2>; + bias-disable; + }; +}; + +&qup_spi6_default { + pinconf { + pins = "gpio59", "gpio60", "gpio61", "gpio62"; + drive-strength = <2>; + bias-disable; + }; +}; + +&qup_spi10_default { + pinconf { + pins = "gpio86", "gpio87", "gpio88", "gpio89"; + drive-strength = <2>; + bias-disable; + }; +}; + diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi new file mode 100644 index 000000000000..8011c5fe2a31 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -0,0 +1,2187 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * SC7180 SoC device tree source + * + * Copyright (c) 2019, The Linux Foundation. All rights reserved. + */ + +#include <dt-bindings/clock/qcom,gcc-sc7180.h> +#include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/phy/phy-qcom-qusb2.h> +#include <dt-bindings/power/qcom-aoss-qmp.h> +#include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/reset/qcom,sdm845-aoss.h> +#include <dt-bindings/reset/qcom,sdm845-pdc.h> +#include <dt-bindings/soc/qcom,rpmh-rsc.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c7; + i2c8 = &i2c8; + i2c9 = &i2c9; + i2c10 = &i2c10; + i2c11 = &i2c11; + spi0 = &spi0; + spi1 = &spi1; + spi3 = &spi3; + spi5 = &spi5; + spi6 = &spi6; + spi8 = &spi8; + spi10 = &spi10; + spi11 = &spi11; + }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + clock-frequency = <38400000>; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + clock-frequency = <32764>; + #clock-cells = <0>; + }; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + aop_cmd_db_mem: memory@80820000 { + reg = <0x0 0x80820000 0x0 0x20000>; + compatible = "qcom,cmd-db"; + }; + + smem_mem: memory@80900000 { + reg = <0x0 0x80900000 0x0 0x200000>; + no-map; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + #cooling-cells = <2>; + qcom,freq-domain = <&cpufreq_hw 0>; + L2_0: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + L3_0: l3-cache { + compatible = "cache"; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x100>; + enable-method = "psci"; + next-level-cache = <&L2_100>; + #cooling-cells = <2>; + qcom,freq-domain = <&cpufreq_hw 0>; + L2_100: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x200>; + enable-method = "psci"; + next-level-cache = <&L2_200>; + #cooling-cells = <2>; + qcom,freq-domain = <&cpufreq_hw 0>; + L2_200: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x300>; + enable-method = "psci"; + next-level-cache = <&L2_300>; + #cooling-cells = <2>; + qcom,freq-domain = <&cpufreq_hw 0>; + L2_300: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU4: cpu@400 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x400>; + enable-method = "psci"; + next-level-cache = <&L2_400>; + #cooling-cells = <2>; + qcom,freq-domain = <&cpufreq_hw 0>; + L2_400: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU5: cpu@500 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x500>; + enable-method = "psci"; + next-level-cache = <&L2_500>; + #cooling-cells = <2>; + qcom,freq-domain = <&cpufreq_hw 0>; + L2_500: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU6: cpu@600 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x600>; + enable-method = "psci"; + next-level-cache = <&L2_600>; + #cooling-cells = <2>; + qcom,freq-domain = <&cpufreq_hw 1>; + L2_600: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU7: cpu@700 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x700>; + enable-method = "psci"; + next-level-cache = <&L2_700>; + #cooling-cells = <2>; + qcom,freq-domain = <&cpufreq_hw 1>; + L2_700: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0 0x80000000 0 0>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>; + }; + + firmware { + scm { + compatible = "qcom,scm-sc7180", "qcom,scm"; + }; + }; + + tcsr_mutex: hwlock { + compatible = "qcom,tcsr-mutex"; + syscon = <&tcsr_mutex_regs 0 0x1000>; + #hwlock-cells = <1>; + }; + + smem { + compatible = "qcom,smem"; + memory-region = <&smem_mem>; + hwlocks = <&tcsr_mutex 3>; + }; + + smp2p-cdsp { + compatible = "qcom,smp2p"; + qcom,smem = <94>, <432>; + + interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apss_shared 6>; + + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + cdsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + cdsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-lpass { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + + interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apss_shared 10>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + adsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + adsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-mpss { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>; + mboxes = <&apss_shared 14>; + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + modem_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + modem_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + soc: soc { + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + dma-ranges = <0 0 0 0 0x10 0>; + compatible = "simple-bus"; + + gcc: clock-controller@100000 { + compatible = "qcom,gcc-sc7180"; + reg = <0 0x00100000 0 0x1f0000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>; + clock-names = "bi_tcxo", "bi_tcxo_ao"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + qfprom@784000 { + compatible = "qcom,qfprom"; + reg = <0 0x00784000 0 0x8ff>; + #address-cells = <1>; + #size-cells = <1>; + + qusb2p_hstx_trim: hstx-trim-primary@25b { + reg = <0x25b 0x1>; + bits = <1 3>; + }; + }; + + qupv3_id_0: geniqup@8c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x008c0000 0 0x6000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + i2c0: i2c@880000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00880000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c0_default>; + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi0: spi@880000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00880000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi0_default>; + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart0: serial@880000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00880000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart0_default>; + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + i2c1: i2c@884000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00884000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c1_default>; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@884000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00884000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi1_default>; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart1: serial@884000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00884000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart1_default>; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + i2c2: i2c@888000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00888000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c2_default>; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart2: serial@888000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00888000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart2_default>; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + i2c3: i2c@88c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0088c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c3_default>; + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi3: spi@88c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0088c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi3_default>; + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart3: serial@88c000 { + compatible = "qcom,geni-uart"; + reg = <0 0x0088c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart3_default>; + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + i2c4: i2c@890000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00890000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c4_default>; + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart4: serial@890000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00890000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart4_default>; + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + i2c5: i2c@894000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00894000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c5_default>; + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi5: spi@894000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00894000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi5_default>; + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart5: serial@894000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00894000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart5_default>; + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + qupv3_id_1: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x00ac0000 0 0x6000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + i2c6: i2c@a80000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a80000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c6_default>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi6: spi@a80000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a80000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi6_default>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart6: serial@a80000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a80000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart6_default>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + i2c7: i2c@a84000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a84000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c7_default>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart7: serial@a84000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a84000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart7_default>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + i2c8: i2c@a88000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a88000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c8_default>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi8: spi@a88000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a88000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi8_default>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart8: serial@a88000 { + compatible = "qcom,geni-debug-uart"; + reg = <0 0x00a88000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart8_default>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + i2c9: i2c@a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a8c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c9_default>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart9: serial@a8c000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a8c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart9_default>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + i2c10: i2c@a90000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a90000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c10_default>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi10: spi@a90000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a90000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi10_default>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart10: serial@a90000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a90000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart10_default>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + i2c11: i2c@a94000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a94000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c11_default>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi11: spi@a94000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a94000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi11_default>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart11: serial@a94000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a94000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart11_default>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + tcsr_mutex_regs: syscon@1f40000 { + compatible = "syscon"; + reg = <0 0x01f40000 0 0x40000>; + }; + + tlmm: pinctrl@3500000 { + compatible = "qcom,sc7180-pinctrl"; + reg = <0 0x03500000 0 0x300000>, + <0 0x03900000 0 0x300000>, + <0 0x03d00000 0 0x300000>; + reg-names = "west", "north", "south"; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 120>; + wakeup-parent = <&pdc>; + + qspi_clk: qspi-clk { + pinmux { + pins = "gpio63"; + function = "qspi_clk"; + }; + }; + + qspi_cs0: qspi-cs0 { + pinmux { + pins = "gpio68"; + function = "qspi_cs"; + }; + }; + + qspi_cs1: qspi-cs1 { + pinmux { + pins = "gpio72"; + function = "qspi_cs"; + }; + }; + + qspi_data01: qspi-data01 { + pinmux-data { + pins = "gpio64", "gpio65"; + function = "qspi_data"; + }; + }; + + qspi_data12: qspi-data12 { + pinmux-data { + pins = "gpio66", "gpio67"; + function = "qspi_data"; + }; + }; + + qup_i2c0_default: qup-i2c0-default { + pinmux { + pins = "gpio34", "gpio35"; + function = "qup00"; + }; + }; + + qup_i2c1_default: qup-i2c1-default { + pinmux { + pins = "gpio0", "gpio1"; + function = "qup01"; + }; + }; + + qup_i2c2_default: qup-i2c2-default { + pinmux { + pins = "gpio15", "gpio16"; + function = "qup02_i2c"; + }; + }; + + qup_i2c3_default: qup-i2c3-default { + pinmux { + pins = "gpio38", "gpio39"; + function = "qup03"; + }; + }; + + qup_i2c4_default: qup-i2c4-default { + pinmux { + pins = "gpio115", "gpio116"; + function = "qup04_i2c"; + }; + }; + + qup_i2c5_default: qup-i2c5-default { + pinmux { + pins = "gpio25", "gpio26"; + function = "qup05"; + }; + }; + + qup_i2c6_default: qup-i2c6-default { + pinmux { + pins = "gpio59", "gpio60"; + function = "qup10"; + }; + }; + + qup_i2c7_default: qup-i2c7-default { + pinmux { + pins = "gpio6", "gpio7"; + function = "qup11_i2c"; + }; + }; + + qup_i2c8_default: qup-i2c8-default { + pinmux { + pins = "gpio42", "gpio43"; + function = "qup12"; + }; + }; + + qup_i2c9_default: qup-i2c9-default { + pinmux { + pins = "gpio46", "gpio47"; + function = "qup13_i2c"; + }; + }; + + qup_i2c10_default: qup-i2c10-default { + pinmux { + pins = "gpio86", "gpio87"; + function = "qup14"; + }; + }; + + qup_i2c11_default: qup-i2c11-default { + pinmux { + pins = "gpio53", "gpio54"; + function = "qup15"; + }; + }; + + qup_spi0_default: qup-spi0-default { + pinmux { + pins = "gpio34", "gpio35", + "gpio36", "gpio37"; + function = "qup00"; + }; + }; + + qup_spi1_default: qup-spi1-default { + pinmux { + pins = "gpio0", "gpio1", + "gpio2", "gpio3"; + function = "qup01"; + }; + }; + + qup_spi3_default: qup-spi3-default { + pinmux { + pins = "gpio38", "gpio39", + "gpio40", "gpio41"; + function = "qup03"; + }; + }; + + qup_spi5_default: qup-spi5-default { + pinmux { + pins = "gpio25", "gpio26", + "gpio27", "gpio28"; + function = "qup05"; + }; + }; + + qup_spi6_default: qup-spi6-default { + pinmux { + pins = "gpio59", "gpio60", + "gpio61", "gpio62"; + function = "qup10"; + }; + }; + + qup_spi8_default: qup-spi8-default { + pinmux { + pins = "gpio42", "gpio43", + "gpio44", "gpio45"; + function = "qup12"; + }; + }; + + qup_spi10_default: qup-spi10-default { + pinmux { + pins = "gpio86", "gpio87", + "gpio88", "gpio89"; + function = "qup14"; + }; + }; + + qup_spi11_default: qup-spi11-default { + pinmux { + pins = "gpio53", "gpio54", + "gpio55", "gpio56"; + function = "qup15"; + }; + }; + + qup_uart0_default: qup-uart0-default { + pinmux { + pins = "gpio34", "gpio35", + "gpio36", "gpio37"; + function = "qup00"; + }; + }; + + qup_uart1_default: qup-uart1-default { + pinmux { + pins = "gpio0", "gpio1", + "gpio2", "gpio3"; + function = "qup01"; + }; + }; + + qup_uart2_default: qup-uart2-default { + pinmux { + pins = "gpio15", "gpio16"; + function = "qup02_uart"; + }; + }; + + qup_uart3_default: qup-uart3-default { + pinmux { + pins = "gpio38", "gpio39", + "gpio40", "gpio41"; + function = "qup03"; + }; + }; + + qup_uart4_default: qup-uart4-default { + pinmux { + pins = "gpio115", "gpio116"; + function = "qup04_uart"; + }; + }; + + qup_uart5_default: qup-uart5-default { + pinmux { + pins = "gpio25", "gpio26", + "gpio27", "gpio28"; + function = "qup05"; + }; + }; + + qup_uart6_default: qup-uart6-default { + pinmux { + pins = "gpio59", "gpio60", + "gpio61", "gpio62"; + function = "qup10"; + }; + }; + + qup_uart7_default: qup-uart7-default { + pinmux { + pins = "gpio6", "gpio7"; + function = "qup11_uart"; + }; + }; + + qup_uart8_default: qup-uart8-default { + pinmux { + pins = "gpio44", "gpio45"; + function = "qup12"; + }; + }; + + qup_uart9_default: qup-uart9-default { + pinmux { + pins = "gpio46", "gpio47"; + function = "qup13_uart"; + }; + }; + + qup_uart10_default: qup-uart10-default { + pinmux { + pins = "gpio86", "gpio87", + "gpio88", "gpio89"; + function = "qup14"; + }; + }; + + qup_uart11_default: qup-uart11-default { + pinmux { + pins = "gpio53", "gpio54", + "gpio55", "gpio56"; + function = "qup15"; + }; + }; + }; + + qspi: spi@88dc000 { + compatible = "qcom,qspi-v1"; + reg = <0 0x088dc000 0 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>, + <&gcc GCC_QSPI_CORE_CLK>; + clock-names = "iface", "core"; + status = "disabled"; + }; + + usb_1_hsphy: phy@88e3000 { + compatible = "qcom,sc7180-qusb2-phy"; + reg = <0 0x088e3000 0 0x400>; + status = "disabled"; + #phy-cells = <0>; + clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "cfg_ahb", "ref"; + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + + nvmem-cells = <&qusb2p_hstx_trim>; + }; + + usb_1_qmpphy: phy-wrapper@88e9000 { + compatible = "qcom,sc7180-qmp-usb3-phy"; + reg = <0 0x088e9000 0 0x18c>, + <0 0x088e8000 0 0x38>; + reg-names = "reg-base", "dp_com"; + status = "disabled"; + #clock-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "com_aux"; + + resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, + <&gcc GCC_USB3_PHY_PRIM_BCR>; + reset-names = "phy", "common"; + + usb_1_ssphy: phy@88e9200 { + reg = <0 0x088e9200 0 0x128>, + <0 0x088e9400 0 0x200>, + <0 0x088e9c00 0 0x218>, + <0 0x088e9600 0 0x128>, + <0 0x088e9800 0 0x200>, + <0 0x088e9a00 0 0x18>; + #clock-cells = <0>; + #phy-cells = <0>; + clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_phy_pipe_clk_src"; + }; + }; + + system-cache-controller@9200000 { + compatible = "qcom,sc7180-llcc"; + reg = <0 0x09200000 0 0x200000>, <0 0x09600000 0 0x50000>; + reg-names = "llcc_base", "llcc_broadcast_base"; + interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; + }; + + usb_1: usb@a6f8800 { + compatible = "qcom,sc7180-dwc3", "qcom,dwc3"; + reg = <0 0x0a6f8800 0 0x400>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + dma-ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>; + clock-names = "cfg_noc", "core", "iface", "mock_utmi", + "sleep"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <150000000>; + + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq", "ss_phy_irq", + "dm_hs_phy_irq", "dp_hs_phy_irq"; + + power-domains = <&gcc USB30_PRIM_GDSC>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + usb_1_dwc3: dwc3@a600000 { + compatible = "snps,dwc3"; + reg = <0 0x0a600000 0 0xe000>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x540 0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_1_hsphy>, <&usb_1_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + pdc: interrupt-controller@b220000 { + compatible = "qcom,sc7180-pdc", "qcom,pdc"; + reg = <0 0x0b220000 0 0x30000>; + qcom,pdc-ranges = <0 480 15>, <17 497 98>, + <119 634 4>, <124 639 1>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + + pdc_reset: reset-controller@b2e0000 { + compatible = "qcom,sc7180-pdc-global", "qcom,sdm845-pdc-global"; + reg = <0 0x0b2e0000 0 0x20000>; + #reset-cells = <1>; + }; + + tsens0: thermal-sensor@c263000 { + compatible = "qcom,sc7180-tsens","qcom,tsens-v2"; + reg = <0 0x0c263000 0 0x1ff>, /* TM */ + <0 0x0c222000 0 0x1ff>; /* SROT */ + #qcom,sensors = <15>; + interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow","critical"; + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@c265000 { + compatible = "qcom,sc7180-tsens","qcom,tsens-v2"; + reg = <0 0x0c265000 0 0x1ff>, /* TM */ + <0 0x0c223000 0 0x1ff>; /* SROT */ + #qcom,sensors = <10>; + interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow","critical"; + #thermal-sensor-cells = <1>; + }; + + aoss_reset: reset-controller@c2a0000 { + compatible = "qcom,sc7180-aoss-cc", "qcom,sdm845-aoss-cc"; + reg = <0 0x0c2a0000 0 0x31000>; + #reset-cells = <1>; + }; + + aoss_qmp: qmp@c300000 { + compatible = "qcom,sc7180-aoss-qmp"; + reg = <0 0x0c300000 0 0x100000>; + interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>; + mboxes = <&apss_shared 0>; + + #clock-cells = <0>; + #power-domain-cells = <1>; + }; + + spmi_bus: spmi@c440000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0 0x0c440000 0 0x1100>, + <0 0x0c600000 0 0x2000000>, + <0 0x0e600000 0 0x100000>, + <0 0x0e700000 0 0xa0000>, + <0 0x0c40a000 0 0x26000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <1>; + #size-cells = <1>; + interrupt-controller; + #interrupt-cells = <4>; + cell-index = <0>; + }; + + apps_smmu: iommu@15000000 { + compatible = "qcom,sc7180-smmu-500", "arm,mmu-500"; + reg = <0 0x15000000 0 0x100000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>; + }; + + intc: interrupt-controller@17a00000 { + compatible = "arm,gic-v3"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0 0x17a00000 0 0x10000>, /* GICD */ + <0 0x17a60000 0 0x100000>; /* GICR * 8 */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + + msi-controller@17a40000 { + compatible = "arm,gic-v3-its"; + msi-controller; + #msi-cells = <1>; + reg = <0 0x17a40000 0 0x20000>; + status = "disabled"; + }; + }; + + apss_shared: mailbox@17c00000 { + compatible = "qcom,sc7180-apss-shared"; + reg = <0 0x17c00000 0 0x10000>; + #mbox-cells = <1>; + }; + + watchdog@17c10000 { + compatible = "qcom,apss-wdt-sc7180", "qcom,kpss-wdt"; + reg = <0 0x17c10000 0 0x1000>; + clocks = <&sleep_clk>; + }; + + timer@17c20000{ + #address-cells = <2>; + #size-cells = <2>; + ranges; + compatible = "arm,armv7-timer-mem"; + reg = <0 0x17c20000 0 0x1000>; + + frame@17c21000 { + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + reg = <0 0x17c21000 0 0x1000>, + <0 0x17c22000 0 0x1000>; + }; + + frame@17c23000 { + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + reg = <0 0x17c23000 0 0x1000>; + status = "disabled"; + }; + + frame@17c25000 { + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + reg = <0 0x17c25000 0 0x1000>; + status = "disabled"; + }; + + frame@17c27000 { + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + reg = <0 0x17c27000 0 0x1000>; + status = "disabled"; + }; + + frame@17c29000 { + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + reg = <0 0x17c29000 0 0x1000>; + status = "disabled"; + }; + + frame@17c2b000 { + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + reg = <0 0x17c2b000 0 0x1000>; + status = "disabled"; + }; + + frame@17c2d000 { + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + reg = <0 0x17c2d000 0 0x1000>; + status = "disabled"; + }; + }; + + apps_rsc: rsc@18200000 { + compatible = "qcom,rpmh-rsc"; + reg = <0 0x18200000 0 0x10000>, + <0 0x18210000 0 0x10000>, + <0 0x18220000 0 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2"; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = <ACTIVE_TCS 2>, + <SLEEP_TCS 3>, + <WAKE_TCS 3>, + <CONTROL_TCS 1>; + + rpmhcc: clock-controller { + compatible = "qcom,sc7180-rpmh-clk"; + clocks = <&xo_board>; + clock-names = "xo"; + #clock-cells = <1>; + }; + + rpmhpd: power-controller { + compatible = "qcom,sc7180-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; + }; + + rpmhpd_opp_min_svs: opp2 { + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + + rpmhpd_opp_low_svs: opp3 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + rpmhpd_opp_svs: opp4 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + rpmhpd_opp_svs_l1: opp5 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + rpmhpd_opp_svs_l2: opp6 { + opp-level = <224>; + }; + + rpmhpd_opp_nom: opp7 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + rpmhpd_opp_nom_l1: opp8 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + rpmhpd_opp_nom_l2: opp9 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; + }; + + rpmhpd_opp_turbo: opp10 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + rpmhpd_opp_turbo_l1: opp11 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + }; + }; + }; + }; + + cpufreq_hw: cpufreq@18323000 { + compatible = "qcom,cpufreq-hw"; + reg = <0 0x18323000 0 0x1400>, <0 0x18325800 0 0x1400>; + reg-names = "freq-domain0", "freq-domain1"; + + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; + clock-names = "xo", "alternate"; + + #freq-domain-cells = <1>; + }; + }; + + thermal-zones { + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 1>; + + trips { + cpu0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu0_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu0_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 2>; + + trips { + cpu1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu1_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu1_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 3>; + + trips { + cpu2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu2_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu2_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 4>; + + trips { + cpu3_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu3_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu3_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu4-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 5>; + + trips { + cpu4_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu4_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu4_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu5-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 6>; + + trips { + cpu5_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu5_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu5_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu6-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 9>; + + trips { + cpu6_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu6_alert0>; + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu6_alert1>; + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu7-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 10>; + + trips { + cpu7_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu7_alert0>; + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu7_alert1>; + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu8-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 11>; + + trips { + cpu8_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu8_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu8_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu8_alert0>; + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu8_alert1>; + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu9-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 12>; + + trips { + cpu9_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu9_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu9_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu9_alert0>; + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu9_alert1>; + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + aoss0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 0>; + + trips { + aoss0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + cpuss0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 7>; + + trips { + cpuss0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + cpuss0_crit: cluster0_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpuss1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 8>; + + trips { + cpuss1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + cpuss1_crit: cluster0_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + gpuss0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 13>; + + trips { + gpuss0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + gpuss1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 14>; + + trips { + gpuss1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + aoss1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 0>; + + trips { + aoss1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + cwlan-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 1>; + + trips { + cwlan_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + audio-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 2>; + + trips { + audio_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + ddr-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 3>; + + trips { + ddr_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + q6-hvx-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 4>; + + trips { + q6_hvx_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + camera-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 5>; + + trips { + camera_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + mdm-core-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 6>; + + trips { + mdm_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + mdm-dsp-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 7>; + + trips { + mdm_dsp_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + npu-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 8>; + + trips { + npu_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + video-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 9>; + + trips { + video_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi index 9a4ff57fc877..7b53b3c7ffe6 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi @@ -165,7 +165,6 @@ /delete-node/ &venus_mem; /delete-node/ &cdsp_mem; /delete-node/ &cdsp_pas; -/delete-node/ &zap_shader; /delete-node/ &gpu_mem; /* Increase the size from 120 MB to 128 MB */ @@ -651,6 +650,20 @@ ap_ts_i2c: &i2c14 { status = "okay"; }; +&spi5 { + status = "okay"; + + tpm@0 { + compatible = "google,cr50"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&h1_ap_int_odl>; + spi-max-frequency = <800000>; + interrupt-parent = <&tlmm>; + interrupts = <129 IRQ_TYPE_EDGE_RISING>; + }; +}; + &spi10 { status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts index d100f46791a6..eb77aaa6a819 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -197,7 +197,7 @@ &adsp_pas { status = "okay"; - firmware-name = "qcom/db845c/adsp.mdt"; + firmware-name = "qcom/sdm845/adsp.mdt"; }; &apps_rsc { @@ -343,7 +343,7 @@ &cdsp_pas { status = "okay"; - firmware-name = "qcom/db845c/cdsp.mdt"; + firmware-name = "qcom/sdm845/cdsp.mdt"; }; &gcc { @@ -352,6 +352,18 @@ <GCC_QSPI_CNOC_PERIPH_AHB_CLK>; }; +&gpu { + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sdm845/a630_zap.mbn"; + }; +}; + +&mss_pil { + status = "okay"; + firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn"; +}; + &pm8998_gpio { vol_up_pin_a: vol-up-active { pins = "gpio6"; @@ -529,6 +541,8 @@ vdd-1.8-xo-supply = <&vreg_l7a_1p8>; vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; + + qcom,snoc-host-cap-8bit-quirk; }; /* PINCTRL - additions to nodes defined in sdm845.dtsi */ diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts index c57548b7b250..09ad37b0dd71 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts @@ -360,6 +360,13 @@ <GCC_LPASS_SWAY_CLK>; }; +&gpu { + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sdm845/a630_zap.mbn"; + }; +}; + &i2c10 { status = "okay"; clock-frequency = <400000>; diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index ddb1f23c936f..d42302b8889b 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -1357,7 +1357,7 @@ }; }; - cache-controller@1100000 { + system-cache-controller@1100000 { compatible = "qcom,sdm845-llcc"; reg = <0 0x01100000 0 0x200000>, <0 0x01300000 0 0x50000>; reg-names = "llcc_base", "llcc_broadcast_base"; @@ -1374,6 +1374,8 @@ lanes-per-direction = <2>; power-domains = <&gcc UFS_PHY_GDSC>; #reset-cells = <1>; + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; iommus = <&apps_smmu 0x100 0xf>; @@ -1447,6 +1449,7 @@ interrupt-controller; #interrupt-cells = <2>; gpio-ranges = <&tlmm 0 0 150>; + wakeup-parent = <&pdc_intc>; qspi_clk: qspi-clk { pinmux { @@ -2804,7 +2807,7 @@ }; }; - gpu@5000000 { + gpu: gpu@5000000 { compatible = "qcom,adreno-630.2", "qcom,adreno"; #stream-id-cells = <16>; @@ -2824,10 +2827,6 @@ qcom,gmu = <&gmu>; - zap_shader: zap-shader { - memory-region = <&gpu_mem>; - }; - gpu_opp_table: opp-table { compatible = "operating-points-v2"; @@ -2939,6 +2938,15 @@ #power-domain-cells = <1>; }; + pdc_intc: interrupt-controller@b220000 { + compatible = "qcom,sdm845-pdc", "qcom,pdc"; + reg = <0 0x0b220000 0 0x30000>; + qcom,pdc-ranges = <0 480 94>, <94 609 15>, <115 630 7>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + pdc_reset: reset-controller@b2e0000 { compatible = "qcom,sdm845-pdc-global"; reg = <0 0x0b2e0000 0 0x20000>; @@ -2950,8 +2958,9 @@ reg = <0 0x0c263000 0 0x1ff>, /* TM */ <0 0x0c222000 0 0x1ff>; /* SROT */ #qcom,sensors = <13>; - interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "uplow"; + interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; #thermal-sensor-cells = <1>; }; @@ -2960,8 +2969,9 @@ reg = <0 0x0c265000 0 0x1ff>, /* TM */ <0 0x0c223000 0 0x1ff>; /* SROT */ #qcom,sensors = <8>; - interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "uplow"; + interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; #thermal-sensor-cells = <1>; }; @@ -3191,7 +3201,7 @@ <0 0x17a60000 0 0x100000>; /* GICR * 8 */ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; - gic-its@17a40000 { + msi-controller@17a40000 { compatible = "arm,gic-v3-its"; msi-controller; #msi-cells = <1>; diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts index 13dc619687f3..b255be3a4a0a 100644 --- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts +++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts @@ -245,6 +245,13 @@ <GCC_QSPI_CNOC_PERIPH_AHB_CLK>; }; +&gpu { + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/LENOVO/81JL/qcdxkmsuc850.mbn"; + }; +}; + &i2c1 { status = "okay"; clock-frequency = <400000>; diff --git a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts index aa5de42fcae4..8ab16611ebe8 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts @@ -7,6 +7,7 @@ /dts-v1/; #include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include <dt-bindings/gpio/gpio.h> #include "sm8150.dtsi" #include "pm8150.dtsi" #include "pm8150b.dtsi" @@ -366,6 +367,18 @@ }; }; +&remoteproc_adsp { + status = "okay"; +}; + +&remoteproc_cdsp { + status = "okay"; +}; + +&remoteproc_slpi { + status = "okay"; +}; + &tlmm { gpio-reserved-ranges = <0 4>, <126 4>; }; @@ -373,3 +386,25 @@ &uart2 { status = "okay"; }; + +&ufs_mem_hc { + status = "okay"; + + reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l10a_2p5>; + vcc-max-microamp = <750000>; + vccq-supply = <&vreg_l9a_1p2>; + vccq-max-microamp = <700000>; + vccq2-supply = <&vreg_s4a_1p8>; + vccq2-max-microamp = <750000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vdda_ufs_2ln_core_1>; + vdda-max-microamp = <90200>; + vdda-pll-supply = <&vreg_l3c_1p2>; + vdda-pll-max-microamp = <19000>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index 8f23fcadecb8..141c21dfa68c 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -5,8 +5,11 @@ */ #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/qcom-aoss-qmp.h> +#include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> #include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/clock/qcom,gcc-sm8150.h> / { interrupt-parent = <&intc>; @@ -42,6 +45,7 @@ reg = <0x0 0x0>; enable-method = "psci"; next-level-cache = <&L2_0>; + qcom,freq-domain = <&cpufreq_hw 0>; L2_0: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -57,6 +61,7 @@ reg = <0x0 0x100>; enable-method = "psci"; next-level-cache = <&L2_100>; + qcom,freq-domain = <&cpufreq_hw 0>; L2_100: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -70,6 +75,7 @@ reg = <0x0 0x200>; enable-method = "psci"; next-level-cache = <&L2_200>; + qcom,freq-domain = <&cpufreq_hw 0>; L2_200: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -82,6 +88,7 @@ reg = <0x0 0x300>; enable-method = "psci"; next-level-cache = <&L2_300>; + qcom,freq-domain = <&cpufreq_hw 0>; L2_300: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -94,6 +101,7 @@ reg = <0x0 0x400>; enable-method = "psci"; next-level-cache = <&L2_400>; + qcom,freq-domain = <&cpufreq_hw 1>; L2_400: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -106,6 +114,7 @@ reg = <0x0 0x500>; enable-method = "psci"; next-level-cache = <&L2_500>; + qcom,freq-domain = <&cpufreq_hw 1>; L2_500: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -118,6 +127,7 @@ reg = <0x0 0x600>; enable-method = "psci"; next-level-cache = <&L2_600>; + qcom,freq-domain = <&cpufreq_hw 1>; L2_600: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -130,6 +140,7 @@ reg = <0x0 0x700>; enable-method = "psci"; next-level-cache = <&L2_700>; + qcom,freq-domain = <&cpufreq_hw 2>; L2_700: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -283,6 +294,102 @@ hwlocks = <&tcsr_mutex 3>; }; + smp2p-cdsp { + compatible = "qcom,smp2p"; + qcom,smem = <94>, <432>; + + interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apss_shared 6>; + + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + cdsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + cdsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-lpass { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + + interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apss_shared 10>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + adsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + adsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-mpss { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + + interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apss_shared 14>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + modem_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + modem_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-slpi { + compatible = "qcom,smp2p"; + qcom,smem = <481>, <430>; + + interrupts = <GIC_SPI 172 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apss_shared 26>; + + qcom,local-pid = <0>; + qcom,remote-pid = <3>; + + slpi_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + slpi_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + soc: soc@0 { #address-cells = <2>; #size-cells = <2>; @@ -306,8 +413,8 @@ compatible = "qcom,geni-se-qup"; reg = <0x0 0x00ac0000 0x0 0x6000>; clock-names = "m-ahb", "s-ahb"; - clocks = <&gcc 123>, - <&gcc 124>; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; #address-cells = <2>; #size-cells = <2>; ranges; @@ -317,17 +424,120 @@ compatible = "qcom,geni-debug-uart"; reg = <0x0 0x00a90000 0x0 0x4000>; clock-names = "se"; - clocks = <&gcc 105>; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; }; + ufs_mem_hc: ufshc@1d84000 { + compatible = "qcom,sm8150-ufshc", "qcom,ufshc", + "jedec,ufs-2.0"; + reg = <0 0x01d84000 0 0x2500>; + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; + phys = <&ufs_mem_phy_lanes>; + phy-names = "ufsphy"; + lanes-per-direction = <2>; + #reset-cells = <1>; + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + + clock-names = + "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk"; + clocks = + <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; + freq-table-hz = + <37500000 300000000>, + <0 0>, + <0 0>, + <37500000 300000000>, + <0 0>, + <0 0>, + <0 0>, + <0 0>; + + status = "disabled"; + }; + + ufs_mem_phy: phy@1d87000 { + compatible = "qcom,sm8150-qmp-ufs-phy"; + reg = <0 0x01d87000 0 0x1c0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clock-names = "ref", + "ref_aux"; + clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + status = "disabled"; + + ufs_mem_phy_lanes: lanes@1d87400 { + reg = <0 0x01d87400 0 0x108>, + <0 0x01d87600 0 0x1e0>, + <0 0x01d87c00 0 0x1dc>, + <0 0x01d87800 0 0x108>, + <0 0x01d87a00 0 0x1e0>; + #phy-cells = <0>; + }; + }; + tcsr_mutex_regs: syscon@1f40000 { compatible = "syscon"; reg = <0x0 0x01f40000 0x0 0x40000>; }; + remoteproc_slpi: remoteproc@2400000 { + compatible = "qcom,sm8150-slpi-pas"; + reg = <0x0 0x02400000 0x0 0x4040>; + + interrupts-extended = <&intc GIC_SPI 494 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&aoss_qmp AOSS_QMP_LS_SLPI>, + <&rpmhpd 3>, + <&rpmhpd 2>; + power-domain-names = "load_state", "lcx", "lmx"; + + memory-region = <&slpi_mem>; + + qcom,smem-states = <&slpi_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 170 IRQ_TYPE_EDGE_RISING>; + label = "dsps"; + qcom,remote-pid = <3>; + mboxes = <&apss_shared 24>; + }; + }; + tlmm: pinctrl@3100000 { compatible = "qcom,sm8150-pinctrl"; reg = <0x0 0x03100000 0x0 0x300000>, @@ -343,6 +553,74 @@ #interrupt-cells = <2>; }; + remoteproc_mpss: remoteproc@4080000 { + compatible = "qcom,sm8150-mpss-pas"; + reg = <0x0 0x04080000 0x0 0x4040>; + + interrupts-extended = <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", + "stop-ack", "shutdown-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&aoss_qmp AOSS_QMP_LS_MODEM>, + <&rpmhpd 7>, + <&rpmhpd 0>; + power-domain-names = "load_state", "cx", "mss"; + + memory-region = <&mpss_mem>; + + qcom,smem-states = <&modem_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + glink-edge { + interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>; + label = "modem"; + qcom,remote-pid = <1>; + mboxes = <&apss_shared 12>; + }; + }; + + remoteproc_cdsp: remoteproc@8300000 { + compatible = "qcom,sm8150-cdsp-pas"; + reg = <0x0 0x08300000 0x0 0x4040>; + + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&aoss_qmp AOSS_QMP_LS_CDSP>, + <&rpmhpd 7>; + power-domain-names = "load_state", "cx"; + + memory-region = <&cdsp_mem>; + + qcom,smem-states = <&cdsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 574 IRQ_TYPE_EDGE_RISING>; + label = "cdsp"; + qcom,remote-pid = <5>; + mboxes = <&apss_shared 4>; + }; + }; + aoss_qmp: power-controller@c300000 { compatible = "qcom,sm8150-aoss-qmp"; reg = <0x0 0x0c300000 0x0 0x100000>; @@ -372,6 +650,40 @@ cell-index = <0>; }; + remoteproc_adsp: remoteproc@17300000 { + compatible = "qcom,sm8150-adsp-pas"; + reg = <0x0 0x17300000 0x0 0x4040>; + + interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&aoss_qmp AOSS_QMP_LS_LPASS>, + <&rpmhpd 7>; + power-domain-names = "load_state", "cx"; + + memory-region = <&adsp_mem>; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>; + label = "lpass"; + qcom,remote-pid = <2>; + mboxes = <&apss_shared 8>; + }; + }; + intc: interrupt-controller@17a00000 { compatible = "arm,gic-v3"; interrupt-controller; @@ -387,6 +699,12 @@ #mbox-cells = <1>; }; + watchdog@17c10000 { + compatible = "qcom,apss-wdt-sm8150", "qcom,kpss-wdt"; + reg = <0 0x17c10000 0 0x1000>; + clocks = <&sleep_clk>; + }; + timer@17c20000 { #address-cells = <2>; #size-cells = <2>; @@ -469,6 +787,73 @@ clock-names = "xo"; clocks = <&xo_board>; }; + + rpmhpd: power-controller { + compatible = "qcom,sm8150-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; + }; + + rpmhpd_opp_min_svs: opp2 { + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + + rpmhpd_opp_low_svs: opp3 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + rpmhpd_opp_svs: opp4 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + rpmhpd_opp_svs_l1: opp5 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + rpmhpd_opp_svs_l2: opp6 { + opp-level = <224>; + }; + + rpmhpd_opp_nom: opp7 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + rpmhpd_opp_nom_l1: opp8 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + rpmhpd_opp_nom_l2: opp9 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; + }; + + rpmhpd_opp_turbo: opp10 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + rpmhpd_opp_turbo_l1: opp11 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + }; + }; + }; + }; + + cpufreq_hw: cpufreq@18323000 { + compatible = "qcom,cpufreq-hw"; + reg = <0 0x18323000 0 0x1400>, <0 0x18325800 0 0x1400>, + <0 0x18327800 0 0x1400>; + reg-names = "freq-domain0", "freq-domain1", + "freq-domain2"; + + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; + clock-names = "xo", "alternate"; + + #freq-domain-cells = <1>; }; }; diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile index 8fdbd2267384..2153842321ce 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile @@ -3,22 +3,21 @@ dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m.dtb dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-ex.dtb dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n.dtb dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-ex.dtb -dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-cat874.dtb r8a774c0-ek874.dtb -dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x.dtb r8a7795-h3ulcb.dtb -dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-kf.dtb -dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-xs.dtb -dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-salvator-x.dtb r8a7795-es1-h3ulcb.dtb -dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-h3ulcb-kf.dtb -dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-x.dtb r8a7796-m3ulcb.dtb -dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-m3ulcb-kf.dtb -dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-xs.dtb -dtb-$(CONFIG_ARCH_R8A77960) += r8a7796-salvator-x.dtb r8a7796-m3ulcb.dtb -dtb-$(CONFIG_ARCH_R8A77960) += r8a7796-m3ulcb-kf.dtb -dtb-$(CONFIG_ARCH_R8A77960) += r8a7796-salvator-xs.dtb +dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-cat874.dtb r8a774c0-ek874.dtb \ + r8a774c0-ek874-idk-2121wr.dtb +dtb-$(CONFIG_ARCH_R8A7795) += r8a77950-salvator-x.dtb +dtb-$(CONFIG_ARCH_R8A7795) += r8a77950-ulcb.dtb r8a77950-ulcb-kf.dtb +dtb-$(CONFIG_ARCH_R8A7795) += r8a77951-salvator-x.dtb r8a77951-salvator-xs.dtb +dtb-$(CONFIG_ARCH_R8A7795) += r8a77951-ulcb.dtb r8a77951-ulcb-kf.dtb +dtb-$(CONFIG_ARCH_R8A77950) += r8a77950-salvator-x.dtb +dtb-$(CONFIG_ARCH_R8A77950) += r8a77950-ulcb.dtb r8a77950-ulcb-kf.dtb +dtb-$(CONFIG_ARCH_R8A77951) += r8a77951-salvator-x.dtb r8a77951-salvator-xs.dtb +dtb-$(CONFIG_ARCH_R8A77951) += r8a77951-ulcb.dtb r8a77951-ulcb-kf.dtb +dtb-$(CONFIG_ARCH_R8A77960) += r8a77960-salvator-x.dtb r8a77960-salvator-xs.dtb +dtb-$(CONFIG_ARCH_R8A77960) += r8a77960-ulcb.dtb r8a77960-ulcb-kf.dtb dtb-$(CONFIG_ARCH_R8A77961) += r8a77961-salvator-xs.dtb dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-salvator-x.dtb r8a77965-salvator-xs.dtb -dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-m3nulcb.dtb -dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-m3nulcb-kf.dtb +dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-ulcb.dtb r8a77965-ulcb-kf.dtb dtb-$(CONFIG_ARCH_R8A77970) += r8a77970-eagle.dtb r8a77970-v3msk.dtb dtb-$(CONFIG_ARCH_R8A77980) += r8a77980-condor.dtb r8a77980-v3hsk.dtb dtb-$(CONFIG_ARCH_R8A77990) += r8a77990-ebisu.dtb diff --git a/arch/arm64/boot/dts/renesas/hihope-common.dtsi b/arch/arm64/boot/dts/renesas/hihope-common.dtsi index 2c942a7eaeeb..bd056904e8bd 100644 --- a/arch/arm64/boot/dts/renesas/hihope-common.dtsi +++ b/arch/arm64/boot/dts/renesas/hihope-common.dtsi @@ -109,8 +109,7 @@ gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>; gpios-states = <1>; - states = <3300000 1 - 1800000 0>; + states = <3300000 1>, <1800000 0>; }; wlan_en_reg: regulator-wlan_en { diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi index 34a9f472fbb4..8f950dabca54 100644 --- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi @@ -521,12 +521,12 @@ #interrupt-cells = <2>; interrupt-controller; reg = <0 0xe61c0000 0 0x200>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 407>; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 407>; @@ -837,8 +837,8 @@ compatible = "renesas,r8a774a1-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe65a0000 0 0x100>; - interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&cpg CPG_MOD 330>; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; @@ -851,8 +851,8 @@ compatible = "renesas,r8a774a1-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe65b0000 0 0x100>; - interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&cpg CPG_MOD 331>; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; @@ -878,23 +878,23 @@ compatible = "renesas,dmac-r8a774a1", "renesas,rcar-dmac"; reg = <0 0xe6700000 0 0x10000>; - interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -920,23 +920,23 @@ compatible = "renesas,dmac-r8a774a1", "renesas,rcar-dmac"; reg = <0 0xe7300000 0 0x10000>; - interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -962,23 +962,23 @@ compatible = "renesas,dmac-r8a774a1", "renesas,rcar-dmac"; reg = <0 0xe7310000 0 0x10000>; - interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -2075,23 +2075,23 @@ compatible = "renesas,dmac-r8a774a1", "renesas,rcar-dmac"; reg = <0 0xec700000 0 0x10000>; - interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -2117,23 +2117,23 @@ compatible = "renesas,dmac-r8a774a1", "renesas,rcar-dmac"; reg = <0 0xec720000 0 0x10000>; - interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -2323,10 +2323,10 @@ #size-cells = <2>; bus-range = <0x00 0xff>; device_type = "pci"; - ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000 - 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000 - 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000 - 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; + ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>, + <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>, + <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>, + <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; /* Map all possible DDR as inbound ranges */ dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, @@ -2350,10 +2350,10 @@ #size-cells = <2>; bus-range = <0x00 0xff>; device_type = "pci"; - ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000 - 0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000 - 0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000 - 0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>; + ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000>, + <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>, + <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>, + <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>; /* Map all possible DDR as inbound ranges */ dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi index fe78387e4bb8..c40ea300968e 100644 --- a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi @@ -395,12 +395,12 @@ #interrupt-cells = <2>; interrupt-controller; reg = <0 0xe61c0000 0 0x200>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 407>; power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; resets = <&cpg 407>; @@ -711,8 +711,8 @@ compatible = "renesas,r8a774b1-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe65a0000 0 0x100>; - interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&cpg CPG_MOD 330>; power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; @@ -725,8 +725,8 @@ compatible = "renesas,r8a774b1-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe65b0000 0 0x100>; - interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&cpg CPG_MOD 331>; power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; @@ -752,23 +752,23 @@ compatible = "renesas,dmac-r8a774b1", "renesas,rcar-dmac"; reg = <0 0xe6700000 0 0x10000>; - interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -794,23 +794,23 @@ compatible = "renesas,dmac-r8a774b1", "renesas,rcar-dmac"; reg = <0 0xe7300000 0 0x10000>; - interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -836,23 +836,23 @@ compatible = "renesas,dmac-r8a774b1", "renesas,rcar-dmac"; reg = <0 0xe7310000 0 0x10000>; - interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -1949,23 +1949,23 @@ compatible = "renesas,dmac-r8a774b1", "renesas,rcar-dmac"; reg = <0 0xec700000 0 0x10000>; - interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -1983,23 +1983,23 @@ compatible = "renesas,dmac-r8a774b1", "renesas,rcar-dmac"; reg = <0 0xec720000 0 0x10000>; - interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -2192,10 +2192,10 @@ #size-cells = <2>; bus-range = <0x00 0xff>; device_type = "pci"; - ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000 - 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000 - 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000 - 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; + ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>, + <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>, + <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>, + <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; /* Map all possible DDR as inbound ranges */ dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, @@ -2219,10 +2219,10 @@ #size-cells = <2>; bus-range = <0x00 0xff>; device_type = "pci"; - ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000 - 0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000 - 0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000 - 0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>; + ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000>, + <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>, + <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>, + <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>; /* Map all possible DDR as inbound ranges */ dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts b/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts index c99b1dec52ef..26aee004a44e 100644 --- a/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts +++ b/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts @@ -110,8 +110,7 @@ gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; gpios-states = <1>; - states = <3300000 1 - 1800000 0>; + states = <3300000 1>, <1800000 0>; }; wlan_en_reg: fixedregulator { diff --git a/arch/arm64/boot/dts/renesas/r8a774c0-ek874-idk-2121wr.dts b/arch/arm64/boot/dts/renesas/r8a774c0-ek874-idk-2121wr.dts new file mode 100644 index 000000000000..a7b27d09f6c2 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a774c0-ek874-idk-2121wr.dts @@ -0,0 +1,116 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the Silicon Linux RZ/G2E evaluation kit (EK874), + * connected to an Advantech IDK-2121WR 21.5" LVDS panel + * + * Copyright (C) 2019 Renesas Electronics Corp. + */ + +#include "r8a774c0-ek874.dts" + +/ { + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm5 0 50000>; + + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + + power-supply = <®_12p0v>; + enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; + }; + + panel-lvds { + compatible = "advantech,idk-2121wr", "panel-lvds"; + + width-mm = <476>; + height-mm = <268>; + + data-mapping = "vesa-24"; + + panel-timing { + clock-frequency = <148500000>; + hactive = <1920>; + vactive = <1080>; + hsync-len = <44>; + hfront-porch = <88>; + hback-porch = <148>; + vfront-porch = <4>; + vback-porch = <36>; + vsync-len = <5>; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dual-lvds-odd-pixels; + panel_in0: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + + port@1 { + reg = <1>; + dual-lvds-even-pixels; + panel_in1: endpoint { + remote-endpoint = <&lvds1_out>; + }; + }; + }; + }; +}; + +&gpio0 { + /* + * When GP0_17 is low LVDS[01] are connected to the LVDS connector + * When GP0_17 is high LVDS[01] are connected to the LT8918L + */ + lvds-connector-en-gpio{ + gpio-hog; + gpios = <17 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "lvds-connector-en-gpio"; + }; +}; + +&lvds0 { + ports { + port@1 { + lvds0_out: endpoint { + remote-endpoint = <&panel_in0>; + }; + }; + }; +}; + +&lvds1 { + status = "okay"; + + clocks = <&cpg CPG_MOD 727>, <&x13_clk>, <&extal_clk>; + clock-names = "fck", "dclkin.0", "extal"; + + ports { + port@1 { + lvds1_out: endpoint { + remote-endpoint = <&panel_in1>; + }; + }; + }; +}; + +&pfc { + pwm5_pins: pwm5 { + groups = "pwm5_a"; + function = "pwm5"; + }; +}; + +&pwm5 { + pinctrl-0 = <&pwm5_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi index c7bdc3606323..a53cd5fcc401 100644 --- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi @@ -369,12 +369,12 @@ #interrupt-cells = <2>; interrupt-controller; reg = <0 0xe61c0000 0 0x200>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 407>; power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; resets = <&cpg 407>; @@ -697,8 +697,8 @@ compatible = "renesas,r8a774c0-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe65a0000 0 0x100>; - interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&cpg CPG_MOD 330>; power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; @@ -711,8 +711,8 @@ compatible = "renesas,r8a774c0-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe65b0000 0 0x100>; - interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&cpg CPG_MOD 331>; power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; @@ -725,23 +725,23 @@ compatible = "renesas,dmac-r8a774c0", "renesas,rcar-dmac"; reg = <0 0xe6700000 0 0x10000>; - interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -767,23 +767,23 @@ compatible = "renesas,dmac-r8a774c0", "renesas,rcar-dmac"; reg = <0 0xe7300000 0 0x10000>; - interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -809,23 +809,23 @@ compatible = "renesas,dmac-r8a774c0", "renesas,rcar-dmac"; reg = <0 0xe7310000 0 0x10000>; - interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -1521,23 +1521,23 @@ compatible = "renesas,dmac-r8a774c0", "renesas,rcar-dmac"; reg = <0 0xec700000 0 0x10000>; - interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -1679,10 +1679,10 @@ #size-cells = <2>; bus-range = <0x00 0xff>; device_type = "pci"; - ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000 - 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000 - 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000 - 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; + ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>, + <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>, + <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>, + <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; /* Map all possible DDR as inbound ranges */ dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>; interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a77950-salvator-x.dts index c72968623e94..2438825c9b22 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a77950-salvator-x.dts @@ -6,11 +6,11 @@ */ /dts-v1/; -#include "r8a7795-es1.dtsi" +#include "r8a77950.dtsi" #include "salvator-x.dtsi" / { - model = "Renesas Salvator-X board based on r8a7795 ES1.x"; + model = "Renesas Salvator-X board based on r8a77950"; compatible = "renesas,salvator-x", "renesas,r8a7795"; memory@48000000 { diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a77950-ulcb-kf.dts index 80791ed27539..dcaaf12cec40 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts +++ b/arch/arm64/boot/dts/renesas/r8a77950-ulcb-kf.dts @@ -6,11 +6,11 @@ * Copyright (C) 2017 Cogent Embedded, Inc. */ -#include "r8a7795-h3ulcb.dts" +#include "r8a77950-ulcb.dts" #include "ulcb-kf.dtsi" / { - model = "Renesas H3ULCB Kingfisher board based on r8a7795 ES2.0+"; + model = "Renesas H3ULCB Kingfisher board based on r8a77950"; compatible = "shimafuji,kingfisher", "renesas,h3ulcb", "renesas,r8a7795"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a77950-ulcb.dts index 598b98168559..38a6d6a108d4 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dts +++ b/arch/arm64/boot/dts/renesas/r8a77950-ulcb.dts @@ -7,11 +7,11 @@ */ /dts-v1/; -#include "r8a7795-es1.dtsi" +#include "r8a77950.dtsi" #include "ulcb.dtsi" / { - model = "Renesas H3ULCB board based on r8a7795 ES1.x"; + model = "Renesas H3ULCB board based on r8a77950"; compatible = "renesas,h3ulcb", "renesas,r8a7795"; memory@48000000 { diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi b/arch/arm64/boot/dts/renesas/r8a77950.dtsi index 14d8513d2a47..15216495e1c8 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77950.dtsi @@ -1,11 +1,11 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the R-Car H3 (R8A77950) ES1.x SoC + * Device Tree Source for the R-Car H3 (R8A77950) SoC * * Copyright (C) 2015 Renesas Electronics Corp. */ -#include "r8a7795.dtsi" +#include "r8a77951.dtsi" &audma0 { iommus = <&ipmmu_mp1 0>, <&ipmmu_mp1 1>, diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a77951-salvator-x.dts index 72874f675359..a402a2fb6e3c 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a77951-salvator-x.dts @@ -6,11 +6,11 @@ */ /dts-v1/; -#include "r8a7795.dtsi" +#include "r8a77951.dtsi" #include "salvator-x.dtsi" / { - model = "Renesas Salvator-X board based on r8a7795 ES2.0+"; + model = "Renesas Salvator-X board based on r8a77951"; compatible = "renesas,salvator-x", "renesas,r8a7795"; memory@48000000 { diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a77951-salvator-xs.dts index 36667c81d43d..cef9da4376a3 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts +++ b/arch/arm64/boot/dts/renesas/r8a77951-salvator-xs.dts @@ -1,16 +1,16 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the Salvator-X 2nd version board with R-Car H3 ES2.0 + * Device Tree Source for the Salvator-X 2nd version board with R-Car H3 ES2.0+ * * Copyright (C) 2015-2017 Renesas Electronics Corp. */ /dts-v1/; -#include "r8a7795.dtsi" +#include "r8a77951.dtsi" #include "salvator-xs.dtsi" / { - model = "Renesas Salvator-X 2nd version board based on r8a7795 ES2.0+"; + model = "Renesas Salvator-X 2nd version board based on r8a77951"; compatible = "renesas,salvator-xs", "renesas,r8a7795"; memory@48000000 { @@ -136,7 +136,7 @@ * - On Salvator-X[S], GP6_3[01] are connected to ADV7482 as irq pins * (when SW31 is the default setting on Salvator-XS). * - If SW31 is the default setting, you cannot use USB2.0 ch3 on - * r8a7795 with Salvator-XS. + * r8a77951 with Salvator-XS. * Hence the SW31 setting must be changed like 2) below. * 1) Default setting of SW31: ON-ON-OFF-OFF-OFF-OFF: * - Connect GP6_3[01] to ADV7842. diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a77951-ulcb-kf.dts index 2f24dfc45617..11f943a67703 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts +++ b/arch/arm64/boot/dts/renesas/r8a77951-ulcb-kf.dts @@ -6,11 +6,11 @@ * Copyright (C) 2017 Cogent Embedded, Inc. */ -#include "r8a7795-es1-h3ulcb.dts" +#include "r8a77951-ulcb.dts" #include "ulcb-kf.dtsi" / { - model = "Renesas H3ULCB Kingfisher board based on r8a7795 ES1.x"; + model = "Renesas H3ULCB Kingfisher board based on r8a77951"; compatible = "shimafuji,kingfisher", "renesas,h3ulcb", "renesas,r8a7795"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a77951-ulcb.dts index 54515eaf0310..8ad8f2a53977 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts +++ b/arch/arm64/boot/dts/renesas/r8a77951-ulcb.dts @@ -7,11 +7,11 @@ */ /dts-v1/; -#include "r8a7795.dtsi" +#include "r8a77951.dtsi" #include "ulcb.dtsi" / { - model = "Renesas H3ULCB board based on r8a7795 ES2.0+"; + model = "Renesas H3ULCB board based on r8a77951"; compatible = "renesas,h3ulcb", "renesas,r8a7795"; memory@48000000 { diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a77951.dtsi index fde6ec122d3b..a8729eb744db 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77951.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the R-Car H3 (R8A77950) SoC + * Device Tree Source for the R-Car H3 (R8A77951) SoC * * Copyright (C) 2015 Renesas Electronics Corp. */ @@ -605,12 +605,12 @@ #interrupt-cells = <2>; interrupt-controller; reg = <0 0xe61c0000 0 0x200>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 407>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 407>; @@ -873,8 +873,8 @@ compatible = "renesas,r8a7795-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe65a0000 0 0x100>; - interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&cpg CPG_MOD 330>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; @@ -887,8 +887,8 @@ compatible = "renesas,r8a7795-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe65b0000 0 0x100>; - interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&cpg CPG_MOD 331>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; @@ -901,8 +901,8 @@ compatible = "renesas,r8a7795-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe6460000 0 0x100>; - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&cpg CPG_MOD 326>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; @@ -915,8 +915,8 @@ compatible = "renesas,r8a7795-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe6470000 0 0x100>; - interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&cpg CPG_MOD 329>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; @@ -951,23 +951,23 @@ compatible = "renesas,dmac-r8a7795", "renesas,rcar-dmac"; reg = <0 0xe6700000 0 0x10000>; - interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -993,23 +993,23 @@ compatible = "renesas,dmac-r8a7795", "renesas,rcar-dmac"; reg = <0 0xe7300000 0 0x10000>; - interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -1035,23 +1035,23 @@ compatible = "renesas,dmac-r8a7795", "renesas,rcar-dmac"; reg = <0 0xe7310000 0 0x10000>; - interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -2343,23 +2343,23 @@ compatible = "renesas,dmac-r8a7795", "renesas,rcar-dmac"; reg = <0 0xec700000 0 0x10000>; - interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -2385,23 +2385,23 @@ compatible = "renesas,dmac-r8a7795", "renesas,rcar-dmac"; reg = <0 0xec720000 0 0x10000>; - interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -2679,10 +2679,10 @@ #size-cells = <2>; bus-range = <0x00 0xff>; device_type = "pci"; - ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000 - 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000 - 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000 - 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; + ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>, + <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>, + <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>, + <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; /* Map all possible DDR as inbound ranges */ dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>; interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, @@ -2706,10 +2706,10 @@ #size-cells = <2>; bus-range = <0x00 0xff>; device_type = "pci"; - ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000 - 0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000 - 0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000 - 0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>; + ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000>, + <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>, + <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>, + <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>; /* Map all possible DDR as inbound ranges */ dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>; interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a77960-salvator-x.dts index de37e91e3b7a..ecfbeafeaf36 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a77960-salvator-x.dts @@ -6,11 +6,11 @@ */ /dts-v1/; -#include "r8a7796.dtsi" +#include "r8a77960.dtsi" #include "salvator-x.dtsi" / { - model = "Renesas Salvator-X board based on r8a7796"; + model = "Renesas Salvator-X board based on r8a77960"; compatible = "renesas,salvator-x", "renesas,r8a7796"; memory@48000000 { diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a77960-salvator-xs.dts index a1cbfef2053f..249896a38fdc 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts +++ b/arch/arm64/boot/dts/renesas/r8a77960-salvator-xs.dts @@ -6,11 +6,11 @@ */ /dts-v1/; -#include "r8a7796.dtsi" +#include "r8a77960.dtsi" #include "salvator-xs.dtsi" / { - model = "Renesas Salvator-X 2nd version board based on r8a7796"; + model = "Renesas Salvator-X 2nd version board based on r8a77960"; compatible = "renesas,salvator-xs", "renesas,r8a7796"; memory@48000000 { diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a77960-ulcb-kf.dts index 2df50eb11f16..2151c37d77a6 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts +++ b/arch/arm64/boot/dts/renesas/r8a77960-ulcb-kf.dts @@ -6,11 +6,11 @@ * Copyright (C) 2017 Cogent Embedded, Inc. */ -#include "r8a7796-m3ulcb.dts" +#include "r8a77960-ulcb.dts" #include "ulcb-kf.dtsi" / { - model = "Renesas M3ULCB Kingfisher board based on r8a7796"; + model = "Renesas M3ULCB Kingfisher board based on r8a77960"; compatible = "shimafuji,kingfisher", "renesas,m3ulcb", "renesas,r8a7796"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a77960-ulcb.dts index 9e4594c27fa6..d041042a5619 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts +++ b/arch/arm64/boot/dts/renesas/r8a77960-ulcb.dts @@ -7,11 +7,11 @@ */ /dts-v1/; -#include "r8a7796.dtsi" +#include "r8a77960.dtsi" #include "ulcb.dtsi" / { - model = "Renesas M3ULCB board based on r8a7796"; + model = "Renesas M3ULCB board based on r8a77960"; compatible = "renesas,m3ulcb", "renesas,r8a7796"; memory@48000000 { diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a77960.dtsi index b9db882b0351..60f156cfd2d6 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77960.dtsi @@ -574,12 +574,12 @@ #interrupt-cells = <2>; interrupt-controller; reg = <0 0xe61c0000 0 0x200>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 407>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; resets = <&cpg 407>; @@ -825,8 +825,8 @@ compatible = "renesas,r8a7796-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe65a0000 0 0x100>; - interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&cpg CPG_MOD 330>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; @@ -839,8 +839,8 @@ compatible = "renesas,r8a7796-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe65b0000 0 0x100>; - interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&cpg CPG_MOD 331>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; @@ -866,23 +866,23 @@ compatible = "renesas,dmac-r8a7796", "renesas,rcar-dmac"; reg = <0 0xe6700000 0 0x10000>; - interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -908,23 +908,23 @@ compatible = "renesas,dmac-r8a7796", "renesas,rcar-dmac"; reg = <0 0xe7300000 0 0x10000>; - interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -950,23 +950,23 @@ compatible = "renesas,dmac-r8a7796", "renesas,rcar-dmac"; reg = <0 0xe7310000 0 0x10000>; - interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -2210,23 +2210,23 @@ compatible = "renesas,dmac-r8a7796", "renesas,rcar-dmac"; reg = <0 0xec700000 0 0x10000>; - interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -2252,23 +2252,23 @@ compatible = "renesas,dmac-r8a7796", "renesas,rcar-dmac"; reg = <0 0xec720000 0 0x10000>; - interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -2462,10 +2462,10 @@ #size-cells = <2>; bus-range = <0x00 0xff>; device_type = "pci"; - ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000 - 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000 - 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000 - 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; + ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>, + <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>, + <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>, + <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; /* Map all possible DDR as inbound ranges */ dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, @@ -2489,10 +2489,10 @@ #size-cells = <2>; bus-range = <0x00 0xff>; device_type = "pci"; - ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000 - 0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000 - 0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000 - 0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>; + ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000>, + <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>, + <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>, + <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>; /* Map all possible DDR as inbound ranges */ dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm64/boot/dts/renesas/r8a77961.dtsi b/arch/arm64/boot/dts/renesas/r8a77961.dtsi index 64466c86b698..be3824bda632 100644 --- a/arch/arm64/boot/dts/renesas/r8a77961.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77961.dtsi @@ -319,53 +319,133 @@ ranges; rwdt: watchdog@e6020000 { + compatible = "renesas,r8a77961-wdt", + "renesas,rcar-gen3-wdt"; reg = <0 0xe6020000 0 0x0c>; - /* placeholder */ + clocks = <&cpg CPG_MOD 402>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 402>; + status = "disabled"; + }; + + gpio0: gpio@e6050000 { + compatible = "renesas,gpio-r8a77961", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6050000 0 0x50>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 0 16>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 912>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 912>; + }; + + gpio1: gpio@e6051000 { + compatible = "renesas,gpio-r8a77961", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6051000 0 0x50>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 32 29>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 911>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 911>; }; gpio2: gpio@e6052000 { + compatible = "renesas,gpio-r8a77961", + "renesas,rcar-gen3-gpio"; reg = <0 0xe6052000 0 0x50>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; + gpio-ranges = <&pfc 0 64 15>; #interrupt-cells = <2>; interrupt-controller; - /* placeholder */ + clocks = <&cpg CPG_MOD 910>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 910>; }; gpio3: gpio@e6053000 { + compatible = "renesas,gpio-r8a77961", + "renesas,rcar-gen3-gpio"; reg = <0 0xe6053000 0 0x50>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; + gpio-ranges = <&pfc 0 96 16>; #interrupt-cells = <2>; interrupt-controller; - /* placeholder */ + clocks = <&cpg CPG_MOD 909>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 909>; }; gpio4: gpio@e6054000 { + compatible = "renesas,gpio-r8a77961", + "renesas,rcar-gen3-gpio"; reg = <0 0xe6054000 0 0x50>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; + gpio-ranges = <&pfc 0 128 18>; #interrupt-cells = <2>; interrupt-controller; - /* placeholder */ + clocks = <&cpg CPG_MOD 908>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 908>; }; gpio5: gpio@e6055000 { + compatible = "renesas,gpio-r8a77961", + "renesas,rcar-gen3-gpio"; reg = <0 0xe6055000 0 0x50>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; + gpio-ranges = <&pfc 0 160 26>; #interrupt-cells = <2>; interrupt-controller; - /* placeholder */ + clocks = <&cpg CPG_MOD 907>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 907>; }; gpio6: gpio@e6055400 { + compatible = "renesas,gpio-r8a77961", + "renesas,rcar-gen3-gpio"; reg = <0 0xe6055400 0 0x50>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; + gpio-ranges = <&pfc 0 192 32>; #interrupt-cells = <2>; interrupt-controller; - /* placeholder */ + clocks = <&cpg CPG_MOD 906>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 906>; + }; + + gpio7: gpio@e6055800 { + compatible = "renesas,gpio-r8a77961", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6055800 0 0x50>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 224 4>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 905>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 905>; }; pfc: pin-controller@e6060000 { @@ -401,27 +481,138 @@ /* placeholder */ }; + i2c0: i2c@e6500000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a77961", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6500000 0 0x40>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 931>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 931>; + dmas = <&dmac1 0x91>, <&dmac1 0x90>, + <&dmac2 0x91>, <&dmac2 0x90>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c1: i2c@e6508000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a77961", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6508000 0 0x40>; + interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 930>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 930>; + dmas = <&dmac1 0x93>, <&dmac1 0x92>, + <&dmac2 0x93>, <&dmac2 0x92>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + i2c2: i2c@e6510000 { #address-cells = <1>; #size-cells = <0>; + compatible = "renesas,i2c-r8a77961", + "renesas,rcar-gen3-i2c"; reg = <0 0xe6510000 0 0x40>; - /* placeholder */ + interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 929>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 929>; + dmas = <&dmac1 0x95>, <&dmac1 0x94>, + <&dmac2 0x95>, <&dmac2 0x94>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c3: i2c@e66d0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a77961", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66d0000 0 0x40>; + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 928>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 928>; + dmas = <&dmac0 0x97>, <&dmac0 0x96>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; }; i2c4: i2c@e66d8000 { #address-cells = <1>; #size-cells = <0>; + compatible = "renesas,i2c-r8a77961", + "renesas,rcar-gen3-i2c"; reg = <0 0xe66d8000 0 0x40>; - /* placeholder */ + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 927>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 927>; + dmas = <&dmac0 0x99>, <&dmac0 0x98>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c5: i2c@e66e0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a77961", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66e0000 0 0x40>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 919>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 919>; + dmas = <&dmac0 0x9b>, <&dmac0 0x9a>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c6: i2c@e66e8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a77961", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66e8000 0 0x40>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 918>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 918>; + dmas = <&dmac0 0x9d>, <&dmac0 0x9c>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; }; i2c_dvfs: i2c@e60b0000 { #address-cells = <1>; #size-cells = <0>; + compatible = "renesas,iic-r8a77961", + "renesas,rcar-gen3-iic", + "renesas,rmobile-iic"; reg = <0 0xe60b0000 0 0x425>; - /* placeholder */ + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 926>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 926>; + dmas = <&dmac0 0x11>, <&dmac0 0x10>; + dma-names = "tx", "rx"; + status = "disabled"; }; + hscif1: serial@e6550000 { reg = <0 0xe6550000 0 0x60>; /* placeholder */ @@ -438,11 +629,151 @@ /* placeholder */ }; + dmac0: dma-controller@e6700000 { + compatible = "renesas,dmac-r8a77961", + "renesas,rcar-dmac"; + reg = <0 0xe6700000 0 0x10000>; + interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 219>; + clock-names = "fck"; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 219>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + dmac1: dma-controller@e7300000 { + compatible = "renesas,dmac-r8a77961", + "renesas,rcar-dmac"; + reg = <0 0xe7300000 0 0x10000>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 218>; + clock-names = "fck"; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 218>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + dmac2: dma-controller@e7310000 { + compatible = "renesas,dmac-r8a77961", + "renesas,rcar-dmac"; + reg = <0 0xe7310000 0 0x10000>; + interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 217>; + clock-names = "fck"; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 217>; + #dma-cells = <1>; + dma-channels = <16>; + }; + avb: ethernet@e6800000 { + compatible = "renesas,etheravb-r8a77961", + "renesas,etheravb-rcar-gen3"; reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15", + "ch16", "ch17", "ch18", "ch19", + "ch20", "ch21", "ch22", "ch23", + "ch24"; + clocks = <&cpg CPG_MOD 812>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 812>; + phy-mode = "rgmii"; #address-cells = <1>; #size-cells = <0>; - /* placeholder */ + status = "disabled"; }; pwm1: pwm@e6e31000 { @@ -574,18 +905,51 @@ }; sdhi0: sd@ee100000 { + compatible = "renesas,sdhi-r8a77961", + "renesas,rcar-gen3-sdhi"; reg = <0 0xee100000 0 0x2000>; - /* placeholder */ + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 314>; + max-frequency = <200000000>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 314>; + status = "disabled"; + }; + + sdhi1: sd@ee120000 { + compatible = "renesas,sdhi-r8a77961", + "renesas,rcar-gen3-sdhi"; + reg = <0 0xee120000 0 0x2000>; + interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 313>; + max-frequency = <200000000>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 313>; + status = "disabled"; }; sdhi2: sd@ee140000 { + compatible = "renesas,sdhi-r8a77961", + "renesas,rcar-gen3-sdhi"; reg = <0 0xee140000 0 0x2000>; - /* placeholder */ + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 312>; + max-frequency = <200000000>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 312>; + status = "disabled"; }; sdhi3: sd@ee160000 { + compatible = "renesas,sdhi-r8a77961", + "renesas,rcar-gen3-sdhi"; reg = <0 0xee160000 0 0x2000>; - /* placeholder */ + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 311>; + max-frequency = <200000000>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 311>; + status = "disabled"; }; gic: interrupt-controller@f1010000 { diff --git a/arch/arm64/boot/dts/renesas/r8a77965-m3nulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a77965-ulcb-kf.dts index dadad97051b9..12aa08fd6fd8 100644 --- a/arch/arm64/boot/dts/renesas/r8a77965-m3nulcb-kf.dts +++ b/arch/arm64/boot/dts/renesas/r8a77965-ulcb-kf.dts @@ -6,7 +6,7 @@ * Copyright (C) 2018 Cogent Embedded, Inc. */ -#include "r8a77965-m3nulcb.dts" +#include "r8a77965-ulcb.dts" #include "ulcb-kf.dtsi" / { diff --git a/arch/arm64/boot/dts/renesas/r8a77965-m3nulcb.dts b/arch/arm64/boot/dts/renesas/r8a77965-ulcb.dts index 964078b6cc49..964078b6cc49 100644 --- a/arch/arm64/boot/dts/renesas/r8a77965-m3nulcb.dts +++ b/arch/arm64/boot/dts/renesas/r8a77965-ulcb.dts diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi index bdbe197774d2..c17d90bd160e 100644 --- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi @@ -429,12 +429,12 @@ #interrupt-cells = <2>; interrupt-controller; reg = <0 0xe61c0000 0 0x200>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 407>; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; resets = <&cpg 407>; @@ -680,8 +680,8 @@ compatible = "renesas,r8a77965-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe65a0000 0 0x100>; - interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&cpg CPG_MOD 330>; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; @@ -694,8 +694,8 @@ compatible = "renesas,r8a77965-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe65b0000 0 0x100>; - interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&cpg CPG_MOD 331>; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; @@ -721,23 +721,23 @@ compatible = "renesas,dmac-r8a77965", "renesas,rcar-dmac"; reg = <0 0xe6700000 0 0x10000>; - interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -763,23 +763,23 @@ compatible = "renesas,dmac-r8a77965", "renesas,rcar-dmac"; reg = <0 0xe7300000 0 0x10000>; - interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -805,23 +805,23 @@ compatible = "renesas,dmac-r8a77965", "renesas,rcar-dmac"; reg = <0 0xe7310000 0 0x10000>; - interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -1937,23 +1937,23 @@ compatible = "renesas,dmac-r8a77965", "renesas,rcar-dmac"; reg = <0 0xec700000 0 0x10000>; - interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -1971,23 +1971,23 @@ compatible = "renesas,dmac-r8a77965", "renesas,rcar-dmac"; reg = <0 0xec720000 0 0x10000>; - interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -2184,10 +2184,10 @@ #size-cells = <2>; bus-range = <0x00 0xff>; device_type = "pci"; - ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000 - 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000 - 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000 - 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; + ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>, + <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>, + <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>, + <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; /* Map all possible DDR as inbound ranges */ dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, @@ -2211,10 +2211,10 @@ #size-cells = <2>; bus-range = <0x00 0xff>; device_type = "pci"; - ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000 - 0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000 - 0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000 - 0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>; + ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000>, + <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>, + <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>, + <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>; /* Map all possible DDR as inbound ranges */ dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm64/boot/dts/renesas/r8a77970.dtsi b/arch/arm64/boot/dts/renesas/r8a77970.dtsi index 0d0558e53533..664a73a2cc69 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77970.dtsi @@ -302,8 +302,8 @@ thermal: thermal@e6190000 { compatible = "renesas,thermal-r8a77970"; - reg = <0 0xe6190000 0 0x10 - 0 0xe6190100 0 0x120>; + reg = <0 0xe6190000 0 0x10>, + <0 0xe6190100 0 0x120>; interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; @@ -318,12 +318,12 @@ #interrupt-cells = <2>; interrupt-controller; reg = <0 0xe61c0000 0 0x200>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 407>; power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; resets = <&cpg 407>; @@ -933,15 +933,15 @@ compatible = "renesas,dmac-r8a77970", "renesas,rcar-dmac"; reg = <0 0xe7300000 0 0x10000>; - interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7"; @@ -961,15 +961,15 @@ compatible = "renesas,dmac-r8a77970", "renesas,rcar-dmac"; reg = <0 0xe7310000 0 0x10000>; - interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7"; diff --git a/arch/arm64/boot/dts/renesas/r8a77980.dtsi b/arch/arm64/boot/dts/renesas/r8a77980.dtsi index 4d86669af819..b340fb469999 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77980.dtsi @@ -348,12 +348,12 @@ #interrupt-cells = <2>; interrupt-controller; reg = <0 0xe61c0000 0 0x200>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 407>; power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; resets = <&cpg 407>; @@ -1174,23 +1174,23 @@ compatible = "renesas,dmac-r8a77980", "renesas,rcar-dmac"; reg = <0 0xe7300000 0 0x10000>; - interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -1216,23 +1216,23 @@ compatible = "renesas,dmac-r8a77980", "renesas,rcar-dmac"; reg = <0 0xe7310000 0 0x10000>; - interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -1367,21 +1367,17 @@ #size-cells = <2>; bus-range = <0x00 0xff>; device_type = "pci"; - ranges = < - 0x01000000 0 0x00000000 0 0xfe100000 0 0x0100000 - 0x02000000 0 0xfe200000 0 0xfe200000 0 0x0200000 - 0x02000000 0 0x30000000 0 0x30000000 0 0x8000000 - 0x42000000 0 0x38000000 0 0x38000000 0 0x8000000 - >; - dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 - 0 0x80000000>; + ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x0100000>, + <0x02000000 0 0xfe200000 0 0xfe200000 0 0x0200000>, + <0x02000000 0 0x30000000 0 0x30000000 0 0x8000000>, + <0x42000000 0 0x38000000 0 0x38000000 0 0x8000000>; + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 148 - IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>; clock-names = "pcie", "pcie_bus"; power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts index b38f9d442fc0..4fd2b14fbb8b 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts +++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts @@ -182,8 +182,7 @@ gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>; gpios-states = <1>; - states = <3300000 1 - 1800000 0>; + states = <3300000 1>, <1800000 0>; }; vcc_sdhi1: regulator-vcc-sdhi1 { @@ -206,8 +205,7 @@ gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>; gpios-states = <1>; - states = <3300000 1 - 1800000 0>; + states = <3300000 1>, <1800000 0>; }; vga { @@ -636,7 +634,6 @@ /* audio_clkout0/1/2/3 */ #clock-cells = <1>; clock-frequency = <12288000 11289600>; - clkout-lr-synchronous; status = "okay"; diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi index 67a6824a962c..32d91f210246 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi @@ -394,12 +394,12 @@ #interrupt-cells = <2>; interrupt-controller; reg = <0 0xe61c0000 0 0x200>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 407>; power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 407>; @@ -643,8 +643,8 @@ compatible = "renesas,r8a77990-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe65a0000 0 0x100>; - interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&cpg CPG_MOD 330>; power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; @@ -657,8 +657,8 @@ compatible = "renesas,r8a77990-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe65b0000 0 0x100>; - interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&cpg CPG_MOD 331>; power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; @@ -671,23 +671,23 @@ compatible = "renesas,dmac-r8a77990", "renesas,rcar-dmac"; reg = <0 0xe6700000 0 0x10000>; - interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -713,23 +713,23 @@ compatible = "renesas,dmac-r8a77990", "renesas,rcar-dmac"; reg = <0 0xe7300000 0 0x10000>; - interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -755,23 +755,23 @@ compatible = "renesas,dmac-r8a77990", "renesas,rcar-dmac"; reg = <0 0xe7310000 0 0x10000>; - interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -1474,23 +1474,23 @@ compatible = "renesas,dmac-r8a77990", "renesas,rcar-dmac"; reg = <0 0xec700000 0 0x10000>; - interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -1635,10 +1635,10 @@ #size-cells = <2>; bus-range = <0x00 0xff>; device_type = "pci"; - ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000 - 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000 - 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000 - 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; + ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>, + <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>, + <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>, + <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; /* Map all possible DDR as inbound ranges */ dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>; interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi index e6ee2b709ba6..9503007c34c0 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi @@ -231,12 +231,12 @@ #interrupt-cells = <2>; interrupt-controller; reg = <0 0xe61c0000 0 0x200>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 407>; power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; resets = <&cpg 407>; @@ -365,8 +365,8 @@ compatible = "renesas,r8a77995-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe65a0000 0 0x100>; - interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&cpg CPG_MOD 330>; power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; @@ -379,8 +379,8 @@ compatible = "renesas,r8a77995-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe65b0000 0 0x100>; - interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&cpg CPG_MOD 331>; power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; @@ -418,15 +418,15 @@ compatible = "renesas,dmac-r8a77995", "renesas,rcar-dmac"; reg = <0 0xe6700000 0 0x10000>; - interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7"; @@ -446,15 +446,15 @@ compatible = "renesas,dmac-r8a77995", "renesas,rcar-dmac"; reg = <0 0xe7300000 0 0x10000>; - interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7"; @@ -474,15 +474,15 @@ compatible = "renesas,dmac-r8a77995", "renesas,rcar-dmac"; reg = <0 0xe7310000 0 0x10000>; - interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7"; diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi index 21e01056e759..98bbcafc8c0d 100644 --- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi +++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi @@ -232,8 +232,7 @@ gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; gpios-states = <1>; - states = <3300000 1 - 1800000 0>; + states = <3300000 1>, <1800000 0>; }; vcc_sdhi3: regulator-vcc-sdhi3 { @@ -256,8 +255,7 @@ gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>; gpios-states = <1>; - states = <3300000 1 - 1800000 0>; + states = <3300000 1>, <1800000 0>; }; vga { diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi index 3ef89171538f..ff88af8e39d3 100644 --- a/arch/arm64/boot/dts/renesas/ulcb.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi @@ -120,8 +120,7 @@ gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; gpios-states = <1>; - states = <3300000 1 - 1800000 0>; + states = <3300000 1>, <1800000 0>; }; x12_clk: x12 { diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index 48fb631d5451..60d9437096c7 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -33,6 +33,8 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc-mezzanine.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64-v2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-rock-pi-n10.dtb diff --git a/arch/arm64/boot/dts/rockchip/px30-evb.dts b/arch/arm64/boot/dts/rockchip/px30-evb.dts index 936ed7d71ffc..0a680257d9c2 100644 --- a/arch/arm64/boot/dts/rockchip/px30-evb.dts +++ b/arch/arm64/boot/dts/rockchip/px30-evb.dts @@ -112,6 +112,38 @@ status = "okay"; }; +&dsi { + status = "okay"; + + ports { + mipi_out: port@1 { + reg = <1>; + + mipi_out_panel: endpoint { + remote-endpoint = <&mipi_in_panel>; + }; + }; + }; + + panel@0 { + compatible = "xinpeng,xpp055c272"; + reg = <0>; + backlight = <&backlight>; + iovcc-supply = <&vcc_1v8>; + vci-supply = <&vcc3v3_lcd>; + + port { + mipi_in_panel: endpoint { + remote-endpoint = <&mipi_out_panel>; + }; + }; + }; +}; + +&dsi_dphy { + status = "okay"; +}; + &emmc { bus-width = <8>; cap-mmc-highspeed; @@ -132,6 +164,11 @@ status = "okay"; }; +&gpu { + mali-supply = <&vdd_log>; + status = "okay"; +}; + &i2c0 { status = "okay"; @@ -485,6 +522,12 @@ status = "okay"; }; +&tsadc { + rockchip,hw-tshut-mode = <1>; + rockchip,hw-tshut-polarity = <1>; + status = "okay"; +}; + &u2phy { status = "okay"; diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi index 8812b70f3911..75908c587511 100644 --- a/arch/arm64/boot/dts/rockchip/px30.dtsi +++ b/arch/arm64/boot/dts/rockchip/px30.dtsi @@ -10,6 +10,7 @@ #include <dt-bindings/pinctrl/rockchip.h> #include <dt-bindings/power/px30-power.h> #include <dt-bindings/soc/rockchip,boot-mode.h> +#include <dt-bindings/thermal/thermal.h> / { compatible = "rockchip,px30"; @@ -113,16 +114,11 @@ compatible = "operating-points-v2"; opp-shared; - opp-408000000 { - opp-hz = /bits/ 64 <408000000>; - opp-microvolt = <950000 950000 1350000>; - clock-latency-ns = <40000>; - opp-suspend; - }; opp-600000000 { opp-hz = /bits/ 64 <600000000>; opp-microvolt = <950000 950000 1350000>; clock-latency-ns = <40000>; + opp-suspend; }; opp-816000000 { opp-hz = /bits/ 64 <816000000>; @@ -181,6 +177,55 @@ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; + thermal_zones: thermal-zones { + soc_thermal: soc-thermal { + polling-delay-passive = <20>; + polling-delay = <1000>; + sustainable-power = <750>; + thermal-sensors = <&tsadc 0>; + + trips { + threshold: trip-point-0 { + temperature = <70000>; + hysteresis = <2000>; + type = "passive"; + }; + + target: trip-point-1 { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + soc_crit: soc-crit { + temperature = <115000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&target>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + contribution = <4096>; + }; + + map1 { + trip = <&target>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + contribution = <4096>; + }; + }; + }; + + gpu_thermal: gpu-thermal { + polling-delay-passive = <100>; /* milliseconds */ + polling-delay = <1000>; /* milliseconds */ + thermal-sensors = <&tsadc 1>; + }; + }; + xin24m: xin24m { compatible = "fixed-clock"; #clock-cells = <0>; @@ -365,6 +410,33 @@ compatible = "rockchip,px30-io-voltage-domain"; status = "disabled"; }; + + lvds: lvds { + compatible = "rockchip,px30-lvds"; + #address-cells = <1>; + #size-cells = <0>; + phys = <&dsi_dphy>; + phy-names = "dphy"; + rockchip,grf = <&grf>; + rockchip,output = "lvds"; + status = "disabled"; + + port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + lvds_vopb_in: endpoint@0 { + reg = <0>; + remote-endpoint = <&vopb_out_lvds>; + }; + + lvds_vopl_in: endpoint@1 { + reg = <1>; + remote-endpoint = <&vopl_out_lvds>; + }; + }; + }; }; uart1: serial@ff158000 { @@ -645,6 +717,26 @@ }; }; + tsadc: tsadc@ff280000 { + compatible = "rockchip,px30-tsadc"; + reg = <0x0 0xff280000 0x0 0x100>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + assigned-clocks = <&cru SCLK_TSADC>; + assigned-clock-rates = <50000>; + clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>; + clock-names = "tsadc", "apb_pclk"; + resets = <&cru SRST_TSADC>; + reset-names = "tsadc-apb"; + rockchip,grf = <&grf>; + rockchip,hw-tshut-temp = <120000>; + pinctrl-names = "init", "default", "sleep"; + pinctrl-0 = <&tsadc_otp_gpio>; + pinctrl-1 = <&tsadc_otp_out>; + pinctrl-2 = <&tsadc_otp_gpio>; + #thermal-sensor-cells = <1>; + status = "disabled"; + }; + saradc: saradc@ff288000 { compatible = "rockchip,px30-saradc", "rockchip,rk3399-saradc"; reg = <0x0 0xff288000 0x0 0x100>; @@ -755,6 +847,18 @@ }; }; + dsi_dphy: phy@ff2e0000 { + compatible = "rockchip,px30-dsi-dphy"; + reg = <0x0 0xff2e0000 0x0 0x10000>; + clocks = <&pmucru SCLK_MIPIDSIPHY_REF>, <&cru PCLK_MIPIDSIPHY>; + clock-names = "ref", "pclk"; + resets = <&cru SRST_MIPIDSIPHY_P>; + reset-names = "apb"; + #phy-cells = <0>; + power-domains = <&power PX30_PD_VO>; + status = "disabled"; + }; + usb20_otg: usb@ff300000 { compatible = "rockchip,px30-usb", "rockchip,rk3066-usb", "snps,dwc2"; @@ -820,13 +924,13 @@ status = "disabled"; }; - sdmmc: dwmmc@ff370000 { + sdmmc: mmc@ff370000 { compatible = "rockchip,px30-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xff370000 0x0 0x4000>; interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; - clock-names = "biu", "ciu", "ciu-drv", "ciu-sample"; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; max-frequency = <150000000>; pinctrl-names = "default"; @@ -835,13 +939,13 @@ status = "disabled"; }; - sdio: dwmmc@ff380000 { + sdio: mmc@ff380000 { compatible = "rockchip,px30-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xff380000 0x0 0x4000>; interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>, <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; - clock-names = "biu", "ciu", "ciu-drv", "ciu-sample"; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; max-frequency = <150000000>; pinctrl-names = "default"; @@ -850,13 +954,13 @@ status = "disabled"; }; - emmc: dwmmc@ff390000 { + emmc: mmc@ff390000 { compatible = "rockchip,px30-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xff390000 0x0 0x4000>; interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; - clock-names = "biu", "ciu", "ciu-drv", "ciu-sample"; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; max-frequency = <150000000>; pinctrl-names = "default"; @@ -865,6 +969,57 @@ status = "disabled"; }; + gpu: gpu@ff400000 { + compatible = "rockchip,px30-mali", "arm,mali-bifrost"; + reg = <0x0 0xff400000 0x0 0x4000>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "job", "mmu", "gpu"; + clocks = <&cru SCLK_GPU>; + #cooling-cells = <2>; + power-domains = <&power PX30_PD_GPU>; + status = "disabled"; + }; + + dsi: dsi@ff450000 { + compatible = "rockchip,px30-mipi-dsi"; + reg = <0x0 0xff450000 0x0 0x10000>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_MIPI_DSI>; + clock-names = "pclk"; + phys = <&dsi_dphy>; + phy-names = "dphy"; + power-domains = <&power PX30_PD_VO>; + resets = <&cru SRST_MIPIDSI_HOST_P>; + reset-names = "apb"; + rockchip,grf = <&grf>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + dsi_in_vopb: endpoint@0 { + reg = <0>; + remote-endpoint = <&vopb_out_dsi>; + }; + + dsi_in_vopl: endpoint@1 { + reg = <1>; + remote-endpoint = <&vopl_out_dsi>; + }; + }; + }; + }; + vopb: vop@ff460000 { compatible = "rockchip,px30-vop-big"; reg = <0x0 0xff460000 0x0 0xefc>; @@ -882,6 +1037,16 @@ vopb_out: port { #address-cells = <1>; #size-cells = <0>; + + vopb_out_dsi: endpoint@0 { + reg = <0>; + remote-endpoint = <&dsi_in_vopb>; + }; + + vopb_out_lvds: endpoint@1 { + reg = <1>; + remote-endpoint = <&lvds_vopb_in>; + }; }; }; @@ -914,6 +1079,16 @@ vopl_out: port { #address-cells = <1>; #size-cells = <0>; + + vopl_out_dsi: endpoint@0 { + reg = <0>; + remote-endpoint = <&dsi_in_vopl>; + }; + + vopl_out_lvds: endpoint@1 { + reg = <1>; + remote-endpoint = <&lvds_vopl_in>; + }; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3308.dtsi b/arch/arm64/boot/dts/rockchip/rk3308.dtsi index 8bdc66c62975..116f1900effb 100644 --- a/arch/arm64/boot/dts/rockchip/rk3308.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3308.dtsi @@ -584,14 +584,14 @@ status = "disabled"; }; - sdmmc: dwmmc@ff480000 { + sdmmc: mmc@ff480000 { compatible = "rockchip,rk3308-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xff480000 0x0 0x4000>; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; bus-width = <4>; clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; - clock-names = "biu", "ciu", "ciu-drv", "ciu-sample"; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; max-frequency = <150000000>; pinctrl-names = "default"; @@ -599,27 +599,27 @@ status = "disabled"; }; - emmc: dwmmc@ff490000 { + emmc: mmc@ff490000 { compatible = "rockchip,rk3308-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xff490000 0x0 0x4000>; interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; bus-width = <8>; clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; - clock-names = "biu", "ciu", "ciu-drv", "ciu-sample"; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; max-frequency = <150000000>; status = "disabled"; }; - sdio: dwmmc@ff4a0000 { + sdio: mmc@ff4a0000 { compatible = "rockchip,rk3308-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xff4a0000 0x0 0x4000>; interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; bus-width = <4>; clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>, <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; - clock-names = "biu", "ciu", "ciu-drv", "ciu-sample"; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; max-frequency = <150000000>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-a1.dts b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts index 76b49f573101..16f1656d5203 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-a1.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts @@ -49,7 +49,8 @@ ir-receiver { compatible = "gpio-ir-receiver"; - gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>; + gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>; + linux,rc-map-name = "rc-beelink-gs1"; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi index 91306ebed4da..1f53ead52c7f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi @@ -41,6 +41,7 @@ reg = <0x0 0x0>; clocks = <&cru ARMCLK>; #cooling-cells = <2>; + cpu-idle-states = <&CPU_SLEEP>; dynamic-power-coefficient = <120>; enable-method = "psci"; next-level-cache = <&l2>; @@ -53,6 +54,7 @@ reg = <0x0 0x1>; clocks = <&cru ARMCLK>; #cooling-cells = <2>; + cpu-idle-states = <&CPU_SLEEP>; dynamic-power-coefficient = <120>; enable-method = "psci"; next-level-cache = <&l2>; @@ -65,6 +67,7 @@ reg = <0x0 0x2>; clocks = <&cru ARMCLK>; #cooling-cells = <2>; + cpu-idle-states = <&CPU_SLEEP>; dynamic-power-coefficient = <120>; enable-method = "psci"; next-level-cache = <&l2>; @@ -77,12 +80,26 @@ reg = <0x0 0x3>; clocks = <&cru ARMCLK>; #cooling-cells = <2>; + cpu-idle-states = <&CPU_SLEEP>; dynamic-power-coefficient = <120>; enable-method = "psci"; next-level-cache = <&l2>; operating-points-v2 = <&cpu0_opp_table>; }; + idle-states { + entry-method = "psci"; + + CPU_SLEEP: cpu-sleep { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x0010000>; + entry-latency-us = <120>; + exit-latency-us = <250>; + min-residency-us = <900>; + }; + }; + l2: l2-cache0 { compatible = "cache"; }; @@ -837,7 +854,7 @@ }; }; - sdmmc: dwmmc@ff500000 { + sdmmc: mmc@ff500000 { compatible = "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xff500000 0x0 0x4000>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; @@ -849,7 +866,7 @@ status = "disabled"; }; - sdio: dwmmc@ff510000 { + sdio: mmc@ff510000 { compatible = "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xff510000 0x0 0x4000>; interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; @@ -861,7 +878,7 @@ status = "disabled"; }; - emmc: dwmmc@ff520000 { + emmc: mmc@ff520000 { compatible = "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xff520000 0x0 0x4000>; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts index 8251f3c0d0a8..cbde279ae81d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts +++ b/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts @@ -83,12 +83,6 @@ status = "okay"; }; -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; - status = "okay"; -}; - &usb_otg { dr_mode = "otg"; status = "okay"; diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi index fd86188010b2..a0df61c61925 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi @@ -204,7 +204,7 @@ #clock-cells = <0>; }; - sdmmc: dwmmc@ff0c0000 { + sdmmc: mmc@ff0c0000 { compatible = "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xff0c0000 0x0 0x4000>; max-frequency = <150000000>; @@ -218,7 +218,7 @@ status = "disabled"; }; - sdio0: dwmmc@ff0d0000 { + sdio0: mmc@ff0d0000 { compatible = "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xff0d0000 0x0 0x4000>; max-frequency = <150000000>; @@ -232,7 +232,7 @@ status = "disabled"; }; - emmc: dwmmc@ff0f0000 { + emmc: mmc@ff0f0000 { compatible = "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xff0f0000 0x0 0x4000>; max-frequency = <150000000>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts index c706db0ee9ec..d63faf38cc81 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts @@ -206,7 +206,7 @@ regulator-name = "vdd_log"; regulator-always-on; regulator-boot-on; - regulator-min-microvolt = <800000>; + regulator-min-microvolt = <430000>; regulator-max-microvolt = <1400000>; vin-supply = <&vcc_sys>; }; @@ -660,7 +660,6 @@ keep-power-in-suspend; mmc-pwrseq = <&sdio_pwrseq>; non-removable; - num-slots = <1>; pinctrl-names = "default"; pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; sd-uhs-sdr104; @@ -669,9 +668,12 @@ vqmmc-supply = &vcc1v8_s3; /* IO line */ vmmc-supply = &vcc_sdio; /* card's power */ + #address-cells = <1>; + #size-cells = <0>; status = "okay"; brcmf: wifi@1 { + reg = <1>; compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&gpio0>; interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts index 9dd3b171e91d..e6c1c94c8d69 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts @@ -18,7 +18,7 @@ "google,bob", "google,gru", "rockchip,rk3399"; edp_panel: edp-panel { - compatible = "boe,nv101wxmn51", "simple-panel"; + compatible = "boe,nv101wxmn51"; backlight = <&backlight>; power-supply = <&pp3300_disp>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts index b8066868a3fe..2bbef9fcbe27 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts @@ -39,7 +39,7 @@ }; edp_panel: edp-panel { - compatible = "sharp,lq123p1jx31", "simple-panel"; + compatible = "sharp,lq123p1jx31"; backlight = <&backlight>; power-supply = <&pp3300_disp>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts b/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts index c133e8d64b2a..d69a613fb65a 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts @@ -556,7 +556,6 @@ &sdmmc { clock-frequency = <150000000>; clock-freq-min-max = <200000 150000000>; - supports-sd; bus-width = <4>; cap-mmc-highspeed; cap-sd-highspeed; @@ -572,7 +571,6 @@ bus-width = <8>; mmc-hs400-1_8v; mmc-hs400-enhanced-strobe; - supports-emmc; non-removable; keep-power-in-suspend; status = "okay"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi index 4944d78a0a1c..e87a04477440 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi @@ -654,9 +654,12 @@ sd-uhs-sdr104; vqmmc-supply = <&vcc1v8_s3>; vmmc-supply = <&vccio_sd>; + #address-cells = <1>; + #size-cells = <0>; status = "okay"; brcmf: wifi@1 { + reg = <1>; compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&gpio0>; interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts b/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts index 2a127985ab17..e0d75617bb7e 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts @@ -94,31 +94,9 @@ }; }; -&gpu_thermal { - trips { - gpu_warm: gpu_warm { - temperature = <55000>; - hysteresis = <2000>; - type = "active"; - }; - - gpu_hot: gpu_hot { - temperature = <65000>; - hysteresis = <2000>; - type = "active"; - }; - }; - cooling-maps { - map1 { - trip = <&gpu_warm>; - cooling-device = <&fan THERMAL_NO_LIMIT 1>; - }; - - map2 { - trip = <&gpu_hot>; - cooling-device = <&fan 2 THERMAL_NO_LIMIT>; - }; - }; +&pcie0 { + num-lanes = <4>; + vpcie3v3-supply = <&vcc3v3_sys>; }; &pinctrl { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi index b788ae4f47f0..c88018a0ef35 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi @@ -48,7 +48,7 @@ }; /* switched by pmic_sleep */ - vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { + vcc1v8_s3: vcc1v8-s3 { compatible = "regulator-fixed"; regulator-always-on; regulator-boot-on; @@ -71,6 +71,27 @@ vin-supply = <&vcc3v3_sys>; }; + /* + * Really, this is supplied by vcc_1v8, and vcc1v8_s3 only + * drives the enable pin, but we can't quite model that. + */ + vcca0v9_s3: vcca0v9-s3 { + compatible = "regulator-fixed"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vcca0v9_s3"; + vin-supply = <&vcc1v8_s3>; + }; + + /* As above, actually supplied by vcc3v3_sys */ + vcca1v8_s3: vcca1v8-s3 { + compatible = "regulator-fixed"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca1v8_s3"; + vin-supply = <&vcc1v8_s3>; + }; + vbus_typec: vbus-typec { compatible = "regulator-fixed"; regulator-min-microvolt = <5000000>; @@ -485,7 +506,9 @@ &pcie0 { ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>; max-link-speed = <2>; - num-lanes = <4>; + num-lanes = <2>; + vpcie0v9-supply = <&vcca0v9_s3>; + vpcie1v8-supply = <&vcca1v8_s3>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts index 0541dfce924d..9c659f3115c8 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts @@ -648,9 +648,12 @@ pinctrl-names = "default"; pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; sd-uhs-sdr104; + #address-cells = <1>; + #size-cells = <0>; status = "okay"; brcmf: wifi@1 { + reg = <1>; compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&gpio0>; interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts index d6b3042cffa9..2acb3d500fb9 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts @@ -32,8 +32,6 @@ gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&vcc3v3_pcie_en>; - regulator-always-on; - regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; vin-supply = <&dc_12v>; @@ -50,6 +48,8 @@ pinctrl-names = "default"; pinctrl-0 = <&pcie_perst>; vpcie3v3-supply = <&vcc3v3_pcie>; + vpcie1v8-supply = <&vcc1v8_pmu>; + vpcie0v9-supply = <&vcca_0v9>; status = "okay"; }; @@ -70,3 +70,24 @@ }; }; }; + +&sdio0 { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; + sd-uhs-sdr104; + vmmc-supply = <&vcc3v3_ngff>; + vqmmc-supply = <&vcc_1v8>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi index 7e07dae33d0f..9f225e9c3d54 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi @@ -110,20 +110,6 @@ regulator-max-microvolt = <5000000>; }; - /* - * should be placed inside mp8859, but not until mp8859 has - * its own dt-binding. - */ - dc_12v: mp8859-dcdc1 { - compatible = "regulator-fixed"; - regulator-name = "dc_12v"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - vin-supply = <&vcc_vbus_typec0>; - }; - /* switched by pmic_sleep */ vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { compatible = "regulator-fixed"; @@ -135,6 +121,19 @@ vin-supply = <&vcc_1v8>; }; + vcc3v0_sd: vcc3v0-sd { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc3v0_sd_en>; + regulator-name = "vcc3v0_sd"; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + vin-supply = <&vcc3v3_sys>; + }; + vcc3v3_sys: vcc3v3-sys { compatible = "regulator-fixed"; regulator-name = "vcc3v3_sys"; @@ -145,6 +144,16 @@ vin-supply = <&dc_12v>; }; + vcca_0v9: vcca-0v9 { + compatible = "regulator-fixed"; + regulator-name = "vcca_0v9"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + vin-supply = <&vcc3v3_sys>; + }; + /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */ vcc5v0_host: vcc5v0-host-regulator { compatible = "regulator-fixed"; @@ -153,7 +162,6 @@ pinctrl-names = "default"; pinctrl-0 = <&vcc5v0_host_en &hub_rst>; regulator-name = "vcc5v0_host"; - regulator-always-on; vin-supply = <&vcc_sys>; }; @@ -175,7 +183,6 @@ pinctrl-names = "default"; pinctrl-0 = <&vcc_sys_en>; regulator-name = "vcc_sys"; - regulator-always-on; regulator-boot-on; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; @@ -188,9 +195,9 @@ regulator-name = "vdd_log"; regulator-always-on; regulator-boot-on; - regulator-min-microvolt = <800000>; + regulator-min-microvolt = <450000>; regulator-max-microvolt = <1400000>; - vin-supply = <&vcc3v3_sys>; + pwm-supply = <&vcc3v3_sys>; }; }; @@ -238,6 +245,11 @@ status = "okay"; }; +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + &hdmi { ddc-i2c-bus = <&i2c3>; pinctrl-names = "default"; @@ -245,6 +257,10 @@ status = "okay"; }; +&hdmi_sound { + status = "okay"; +}; + &i2c0 { clock-frequency = <400000>; i2c-scl-rising-time-ns = <168>; @@ -360,7 +376,6 @@ vcc_sdio: LDO_REG4 { regulator-name = "vcc_sdio"; - regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3000000>; @@ -465,8 +480,6 @@ regulator-min-microvolt = <712500>; regulator-max-microvolt = <1500000>; regulator-ramp-delay = <1000>; - regulator-always-on; - regulator-boot-on; vin-supply = <&vcc3v3_sys>; regulator-state-mem { @@ -519,6 +532,24 @@ vbus-supply = <&vcc_vbus_typec0>; status = "okay"; }; + + mp8859: regulator@66 { + compatible = "mps,mp8859"; + reg = <0x66>; + dc_12v: mp8859_dcdc { + regulator-name = "dc_12v"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_vbus_typec0>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <12000000>; + }; + }; + }; }; &i2s0 { @@ -559,7 +590,7 @@ lcd-panel { lcd_panel_reset: lcd-panel-reset { - rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>; }; }; @@ -593,6 +624,12 @@ }; }; + sdmmc { + vcc3v0_sd_en: vcc3v0-sd-en { + rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pmic { pmic_int_l: pmic-int-l { rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; @@ -645,24 +682,34 @@ &sdmmc { bus-width = <4>; - cap-mmc-highspeed; cap-sd-highspeed; cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; disable-wp; max-frequency = <150000000>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; + sd-uhs-sdr104; + vmmc-supply = <&vcc3v0_sd>; + vqmmc-supply = <&vcc_sdio>; status = "okay"; }; &sdhci { bus-width = <8>; - mmc-hs400-1_8v; - mmc-hs400-enhanced-strobe; non-removable; status = "okay"; }; +&spi1 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + }; +}; + &tcphy0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts index 188d9dfc297b..3923ec01ef66 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts @@ -53,6 +53,16 @@ vin-supply = <&vcc12v_dcin>; }; + vcc_0v9: vcc-0v9 { + compatible = "regulator-fixed"; + regulator-name = "vcc_0v9"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + vin-supply = <&vcc3v3_sys>; + }; + vcc3v3_pcie: vcc3v3-pcie-regulator { compatible = "regulator-fixed"; enable-active-high; @@ -463,6 +473,22 @@ pmu1830-supply = <&vcc_3v0>; }; +&pcie_phy { + status = "okay"; +}; + +&pcie0 { + ep-gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>; + max-link-speed = <2>; + num-lanes = <4>; + pinctrl-0 = <&pcie_clkreqnb_cpm>; + pinctrl-names = "default"; + vpcie0v9-supply = <&vcc_0v9>; + vpcie1v8-supply = <&vcc_1v8>; + vpcie3v3-supply = <&vcc3v3_pcie>; + status = "okay"; +}; + &pinctrl { bt { bt_enable_h: bt-enable-h { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi index c7d48d41e184..b69f0f2cbd67 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi @@ -76,6 +76,15 @@ regulator-always-on; vin-supply = <&vcc5v0_sys>; }; + + vcc_0v9: vcc-0v9 { + compatible = "regulator-fixed"; + regulator-name = "vcc_0v9"; + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + vin-supply = <&vcc3v3_sys>; + }; }; &cpu_l0 { @@ -384,6 +393,8 @@ num-lanes = <4>; pinctrl-names = "default"; pinctrl-0 = <&pcie_clkreqn_cpm>; + vpcie0v9-supply = <&vcc_0v9>; + vpcie1v8-supply = <&vcca_1v8>; vpcie3v3-supply = <&vcc3v3_pcie>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64-v2.dts b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64-v2.dts new file mode 100644 index 000000000000..304e3c51391c --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64-v2.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. + * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com> + * Copyright (c) 2019 Katsuhiro Suzuki <katsuhiro@katsuster.net> + */ + +/dts-v1/; +#include "rk3399-rockpro64.dtsi" + +/ { + model = "Pine64 RockPro64 v2.0"; + compatible = "pine64,rockpro64-v2.0", "pine64,rockpro64", "rockchip,rk3399"; +}; + +&i2c1 { + es8316: codec@10 { + compatible = "everest,es8316"; + reg = <0x10>; + clocks = <&cru SCLK_I2S_8CH_OUT>; + clock-names = "mclk"; + #sound-dai-cells = <0>; + + port { + es8316_p0_0: endpoint { + remote-endpoint = <&i2s1_p0_0>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts index 7f4b2eba31d4..4b42717800f7 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts @@ -2,481 +2,18 @@ /* * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com> + * Copyright (c) 2019 Katsuhiro Suzuki <katsuhiro@katsuster.net> */ /dts-v1/; -#include <dt-bindings/input/linux-event-codes.h> -#include <dt-bindings/pwm/pwm.h> -#include "rk3399.dtsi" -#include "rk3399-opp.dtsi" +#include "rk3399-rockpro64.dtsi" / { - model = "Pine64 RockPro64"; - compatible = "pine64,rockpro64", "rockchip,rk3399"; - - chosen { - stdout-path = "serial2:1500000n8"; - }; - - clkin_gmac: external-gmac-clock { - compatible = "fixed-clock"; - clock-frequency = <125000000>; - clock-output-names = "clkin_gmac"; - #clock-cells = <0>; - }; - - gpio-keys { - compatible = "gpio-keys"; - autorepeat; - pinctrl-names = "default"; - pinctrl-0 = <&pwrbtn>; - - power { - debounce-interval = <100>; - gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; - label = "GPIO Key Power"; - linux,code = <KEY_POWER>; - wakeup-source; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>; - - work-led { - label = "work"; - default-state = "on"; - gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; - }; - - diy-led { - label = "diy"; - default-state = "off"; - gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; - }; - }; - - fan: pwm-fan { - compatible = "pwm-fan"; - #cooling-cells = <2>; - fan-supply = <&vcc12v_dcin>; - pwms = <&pwm1 0 50000 0>; - }; - - sdio_pwrseq: sdio-pwrseq { - compatible = "mmc-pwrseq-simple"; - clocks = <&rk808 1>; - clock-names = "ext_clock"; - pinctrl-names = "default"; - pinctrl-0 = <&wifi_enable_h>; - - /* - * On the module itself this is one of these (depending - * on the actual card populated): - * - SDIO_RESET_L_WL_REG_ON - * - PDN (power down when low) - */ - reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; - }; - - sound { - compatible = "audio-graph-card"; - label = "rockchip,rk3399"; - dais = <&i2s1_p0>; - }; - - vcc12v_dcin: vcc12v-dcin { - compatible = "regulator-fixed"; - regulator-name = "vcc12v_dcin"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - }; - - /* switched by pmic_sleep */ - vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { - compatible = "regulator-fixed"; - regulator-name = "vcc1v8_s3"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_1v8>; - }; - - vcc3v3_pcie: vcc3v3-pcie-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pcie_pwr_en>; - regulator-name = "vcc3v3_pcie"; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc12v_dcin>; - }; - - vcc3v3_sys: vcc3v3-sys { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc5v0_sys>; - }; - - /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */ - vcc5v0_host: vcc5v0-host-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_host_en>; - regulator-name = "vcc5v0_host"; - regulator-always-on; - vin-supply = <&vcc5v0_usb>; - }; - - vcc5v0_typec: vcc5v0-typec-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_typec_en>; - regulator-name = "vcc5v0_typec"; - regulator-always-on; - vin-supply = <&vcc5v0_usb>; - }; - - vcc5v0_sys: vcc5v0-sys { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc12v_dcin>; - }; - - vcc5v0_usb: vcc5v0-usb { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_usb"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc12v_dcin>; - }; - - vdd_log: vdd-log { - compatible = "pwm-regulator"; - pwms = <&pwm2 0 25000 1>; - regulator-name = "vdd_log"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1700000>; - vin-supply = <&vcc5v0_sys>; - }; -}; - -&cpu_l0 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l1 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l2 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l3 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_b0 { - cpu-supply = <&vdd_cpu_b>; -}; - -&cpu_b1 { - cpu-supply = <&vdd_cpu_b>; -}; - -&emmc_phy { - status = "okay"; -}; - -&gmac { - assigned-clocks = <&cru SCLK_RMII_SRC>; - assigned-clock-parents = <&clkin_gmac>; - clock_in_out = "input"; - phy-supply = <&vcc_lan>; - phy-mode = "rgmii"; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>; - snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 50000>; - tx_delay = <0x28>; - rx_delay = <0x11>; - status = "okay"; -}; - -&hdmi { - ddc-i2c-bus = <&i2c3>; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_cec>; - status = "okay"; -}; - -&hdmi_sound { - status = "okay"; -}; - -&gpu { - mali-supply = <&vdd_gpu>; - status = "okay"; -}; - -&i2c0 { - clock-frequency = <400000>; - i2c-scl-rising-time-ns = <168>; - i2c-scl-falling-time-ns = <4>; - status = "okay"; - - rk808: pmic@1b { - compatible = "rockchip,rk808"; - reg = <0x1b>; - interrupt-parent = <&gpio3>; - interrupts = <10 IRQ_TYPE_LEVEL_LOW>; - #clock-cells = <1>; - clock-output-names = "xin32k", "rk808-clkout2"; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int_l>; - rockchip,system-power-controller; - wakeup-source; - - vcc1-supply = <&vcc5v0_sys>; - vcc2-supply = <&vcc5v0_sys>; - vcc3-supply = <&vcc5v0_sys>; - vcc4-supply = <&vcc5v0_sys>; - vcc6-supply = <&vcc5v0_sys>; - vcc7-supply = <&vcc5v0_sys>; - vcc8-supply = <&vcc3v3_sys>; - vcc9-supply = <&vcc5v0_sys>; - vcc10-supply = <&vcc5v0_sys>; - vcc11-supply = <&vcc5v0_sys>; - vcc12-supply = <&vcc3v3_sys>; - vddio-supply = <&vcca_1v8>; - - regulators { - vdd_center: DCDC_REG1 { - regulator-name = "vdd_center"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_cpu_l: DCDC_REG2 { - regulator-name = "vdd_cpu_l"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-name = "vcc_ddr"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc_1v8: DCDC_REG4 { - regulator-name = "vcc_1v8"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc1v8_dvp: LDO_REG1 { - regulator-name = "vcc1v8_dvp"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc3v0_touch: LDO_REG2 { - regulator-name = "vcc3v0_touch"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcca_1v8: LDO_REG3 { - regulator-name = "vcca_1v8"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc_sdio: LDO_REG4 { - regulator-name = "vcc_sdio"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3000000>; - }; - }; - - vcca3v0_codec: LDO_REG5 { - regulator-name = "vcca3v0_codec"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_1v5: LDO_REG6 { - regulator-name = "vcc_1v5"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1500000>; - }; - }; - - vcca1v8_codec: LDO_REG7 { - regulator-name = "vcca1v8_codec"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_3v0: LDO_REG8 { - regulator-name = "vcc_3v0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3000000>; - }; - }; - - vcc3v3_s3: vcc_lan: SWITCH_REG1 { - regulator-name = "vcc3v3_s3"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc3v3_s0: SWITCH_REG2 { - regulator-name = "vcc3v3_s0"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - }; - }; - - vdd_cpu_b: regulator@40 { - compatible = "silergy,syr827"; - reg = <0x40>; - fcs,suspend-voltage-selector = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&vsel1_gpio>; - regulator-name = "vdd_cpu_b"; - regulator-min-microvolt = <712500>; - regulator-max-microvolt = <1500000>; - regulator-ramp-delay = <1000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc5v0_sys>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_gpu: regulator@41 { - compatible = "silergy,syr828"; - reg = <0x41>; - fcs,suspend-voltage-selector = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&vsel2_gpio>; - regulator-name = "vdd_gpu"; - regulator-min-microvolt = <712500>; - regulator-max-microvolt = <1500000>; - regulator-ramp-delay = <1000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc5v0_sys>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; + model = "Pine64 RockPro64 v2.1"; + compatible = "pine64,rockpro64-v2.1", "pine64,rockpro64", "rockchip,rk3399"; }; &i2c1 { - i2c-scl-rising-time-ns = <300>; - i2c-scl-falling-time-ns = <15>; - status = "okay"; - es8316: codec@11 { compatible = "everest,es8316"; reg = <0x11>; @@ -491,291 +28,3 @@ }; }; }; - -&i2c3 { - i2c-scl-rising-time-ns = <450>; - i2c-scl-falling-time-ns = <15>; - status = "okay"; -}; - -&i2c4 { - i2c-scl-rising-time-ns = <600>; - i2c-scl-falling-time-ns = <20>; - status = "okay"; - - fusb0: typec-portc@22 { - compatible = "fcs,fusb302"; - reg = <0x22>; - interrupt-parent = <&gpio1>; - interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&fusb0_int>; - vbus-supply = <&vcc5v0_typec>; - status = "okay"; - }; -}; - -&i2s0 { - rockchip,playback-channels = <8>; - rockchip,capture-channels = <8>; - status = "okay"; -}; - -&i2s1 { - rockchip,playback-channels = <2>; - rockchip,capture-channels = <2>; - status = "okay"; - - i2s1_p0: port { - i2s1_p0_0: endpoint { - dai-format = "i2s"; - mclk-fs = <256>; - remote-endpoint = <&es8316_p0_0>; - }; - }; -}; - -&i2s2 { - status = "okay"; -}; - -&io_domains { - status = "okay"; - - bt656-supply = <&vcc1v8_dvp>; - audio-supply = <&vcc_3v0>; - sdmmc-supply = <&vcc_sdio>; - gpio1830-supply = <&vcc_3v0>; -}; - -&pcie0 { - ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; - num-lanes = <4>; - pinctrl-names = "default"; - pinctrl-0 = <&pcie_perst>; - vpcie12v-supply = <&vcc12v_dcin>; - vpcie3v3-supply = <&vcc3v3_pcie>; - status = "okay"; -}; - -&pcie_phy { - status = "okay"; -}; - -&pmu_io_domains { - pmu1830-supply = <&vcc_3v0>; - status = "okay"; -}; - -&pinctrl { - buttons { - pwrbtn: pwrbtn { - rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - fusb302x { - fusb0_int: fusb0-int { - rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - leds { - work_led_gpio: work_led-gpio { - rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - diy_led_gpio: diy_led-gpio { - rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pcie { - pcie_perst: pcie-perst { - rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - pcie_pwr_en: pcie-pwr-en { - rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pmic { - pmic_int_l: pmic-int-l { - rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; - }; - - vsel1_gpio: vsel1-gpio { - rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; - }; - - vsel2_gpio: vsel2-gpio { - rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; - }; - }; - - sdio-pwrseq { - wifi_enable_h: wifi-enable-h { - rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - usb-typec { - vcc5v0_typec_en: vcc5v0_typec_en { - rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - usb2 { - vcc5v0_host_en: vcc5v0-host-en { - rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&pwm0 { - status = "okay"; -}; - -&pwm1 { - status = "okay"; -}; - -&pwm2 { - status = "okay"; -}; - -&saradc { - vref-supply = <&vcca1v8_s3>; - status = "okay"; -}; - -&sdmmc { - bus-width = <4>; - cap-sd-highspeed; - cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; - disable-wp; - max-frequency = <150000000>; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; - status = "okay"; -}; - -&sdhci { - bus-width = <8>; - mmc-hs200-1_8v; - non-removable; - status = "okay"; -}; - -&spi1 { - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - }; -}; - -&tcphy0 { - status = "okay"; -}; - -&tcphy1 { - status = "okay"; -}; - -&tsadc { - /* tshut mode 0:CRU 1:GPIO */ - rockchip,hw-tshut-mode = <1>; - /* tshut polarity 0:LOW 1:HIGH */ - rockchip,hw-tshut-polarity = <1>; - status = "okay"; -}; - -&u2phy0 { - status = "okay"; - - u2phy0_otg: otg-port { - status = "okay"; - }; - - u2phy0_host: host-port { - phy-supply = <&vcc5v0_host>; - status = "okay"; - }; -}; - -&u2phy1 { - status = "okay"; - - u2phy1_otg: otg-port { - status = "okay"; - }; - - u2phy1_host: host-port { - phy-supply = <&vcc5v0_host>; - status = "okay"; - }; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_xfer &uart0_cts>; - status = "okay"; -}; - -&uart2 { - status = "okay"; -}; - -&usb_host0_ehci { - status = "okay"; -}; - -&usb_host0_ohci { - status = "okay"; -}; - -&usb_host1_ehci { - status = "okay"; -}; - -&usb_host1_ohci { - status = "okay"; -}; - -&usbdrd3_0 { - status = "okay"; -}; - -&usbdrd_dwc3_0 { - status = "okay"; - dr_mode = "otg"; -}; - -&usbdrd3_1 { - status = "okay"; -}; - -&usbdrd_dwc3_1 { - status = "okay"; - dr_mode = "host"; -}; - -&vopb { - status = "okay"; -}; - -&vopb_mmu { - status = "okay"; -}; - -&vopl { - status = "okay"; -}; - -&vopl_mmu { - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi new file mode 100644 index 000000000000..9bca25801260 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi @@ -0,0 +1,797 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. + * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com> + */ + +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/pwm/pwm.h> +#include "rk3399.dtsi" +#include "rk3399-opp.dtsi" + +/ { + chosen { + stdout-path = "serial2:1500000n8"; + }; + + clkin_gmac: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "clkin_gmac"; + #clock-cells = <0>; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + pinctrl-names = "default"; + pinctrl-0 = <&pwrbtn>; + + power { + debounce-interval = <100>; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; + label = "GPIO Key Power"; + linux,code = <KEY_POWER>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>; + + work-led { + label = "work"; + default-state = "on"; + gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; + }; + + diy-led { + label = "diy"; + default-state = "off"; + gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; + }; + }; + + fan: pwm-fan { + compatible = "pwm-fan"; + #cooling-cells = <2>; + fan-supply = <&vcc12v_dcin>; + pwms = <&pwm1 0 50000 0>; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; + }; + + sound { + compatible = "audio-graph-card"; + label = "rockchip,rk3399"; + dais = <&i2s1_p0>; + }; + + vcc12v_dcin: vcc12v-dcin { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_dcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + /* switched by pmic_sleep */ + vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { + compatible = "regulator-fixed"; + regulator-name = "vcc1v8_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_1v8>; + }; + + vcc3v3_pcie: vcc3v3-pcie-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_pwr_en>; + regulator-name = "vcc3v3_pcie"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc12v_dcin>; + }; + + vcc3v3_sys: vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_sys>; + }; + + /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */ + vcc5v0_host: vcc5v0-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host_en>; + regulator-name = "vcc5v0_host"; + regulator-always-on; + vin-supply = <&vcc5v0_usb>; + }; + + vcc5v0_typec: vcc5v0-typec-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_typec_en>; + regulator-name = "vcc5v0_typec"; + regulator-always-on; + vin-supply = <&vcc5v0_usb>; + }; + + vcc5v0_sys: vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc5v0_usb: vcc5v0-usb { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; + + vdd_log: vdd-log { + compatible = "pwm-regulator"; + pwms = <&pwm2 0 25000 1>; + regulator-name = "vdd_log"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1700000>; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_b>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_b>; +}; + +&emmc_phy { + status = "okay"; +}; + +&gmac { + assigned-clocks = <&cru SCLK_RMII_SRC>; + assigned-clock-parents = <&clkin_gmac>; + clock_in_out = "input"; + phy-supply = <&vcc_lan>; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; + tx_delay = <0x28>; + rx_delay = <0x11>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c3>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_cec>; + status = "okay"; +}; + +&hdmi_sound { + status = "okay"; +}; + +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + i2c-scl-rising-time-ns = <168>; + i2c-scl-falling-time-ns = <4>; + status = "okay"; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupt-parent = <&gpio3>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk808-clkout2"; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc5v0_sys>; + vcc12-supply = <&vcc3v3_sys>; + vddio-supply = <&vcca_1v8>; + + regulators { + vdd_center: DCDC_REG1 { + regulator-name = "vdd_center"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_l: DCDC_REG2 { + regulator-name = "vdd_cpu_l"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG4 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc1v8_dvp: LDO_REG1 { + regulator-name = "vcc1v8_dvp"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v0_touch: LDO_REG2 { + regulator-name = "vcc3v0_touch"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca_1v8: LDO_REG3 { + regulator-name = "vcca_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_sdio: LDO_REG4 { + regulator-name = "vcc_sdio"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcca3v0_codec: LDO_REG5 { + regulator-name = "vcca3v0_codec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v5: LDO_REG6 { + regulator-name = "vcc_1v5"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1500000>; + }; + }; + + vcca1v8_codec: LDO_REG7 { + regulator-name = "vcca1v8_codec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v0: LDO_REG8 { + regulator-name = "vcc_3v0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc3v3_s3: vcc_lan: SWITCH_REG1 { + regulator-name = "vcc3v3_s3"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_s0: SWITCH_REG2 { + regulator-name = "vcc3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + + vdd_cpu_b: regulator@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + fcs,suspend-voltage-selector = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&vsel1_gpio>; + regulator-name = "vdd_cpu_b"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: regulator@41 { + compatible = "silergy,syr828"; + reg = <0x41>; + fcs,suspend-voltage-selector = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&vsel2_gpio>; + regulator-name = "vdd_gpu"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c1 { + i2c-scl-rising-time-ns = <300>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; +}; + +&i2c3 { + i2c-scl-rising-time-ns = <450>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; +}; + +&i2c4 { + i2c-scl-rising-time-ns = <600>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + + fusb0: typec-portc@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + interrupt-parent = <&gpio1>; + interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&fusb0_int>; + vbus-supply = <&vcc5v0_typec>; + status = "okay"; + }; +}; + +&i2s0 { + rockchip,playback-channels = <8>; + rockchip,capture-channels = <8>; + status = "okay"; +}; + +&i2s1 { + rockchip,playback-channels = <2>; + rockchip,capture-channels = <2>; + status = "okay"; + + i2s1_p0: port { + i2s1_p0_0: endpoint { + dai-format = "i2s"; + mclk-fs = <256>; + remote-endpoint = <&es8316_p0_0>; + }; + }; +}; + +&i2s2 { + status = "okay"; +}; + +&io_domains { + status = "okay"; + + bt656-supply = <&vcc1v8_dvp>; + audio-supply = <&vcc_3v0>; + sdmmc-supply = <&vcc_sdio>; + gpio1830-supply = <&vcc_3v0>; +}; + +&pcie0 { + ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; + num-lanes = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_perst>; + vpcie12v-supply = <&vcc12v_dcin>; + vpcie3v3-supply = <&vcc3v3_pcie>; + status = "okay"; +}; + +&pcie_phy { + status = "okay"; +}; + +&pmu_io_domains { + pmu1830-supply = <&vcc_3v0>; + status = "okay"; +}; + +&pinctrl { + bt { + bt_enable_h: bt-enable-h { + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_host_wake_l: bt-host-wake-l { + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + bt_wake_l: bt-wake-l { + rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + buttons { + pwrbtn: pwrbtn { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + fusb302x { + fusb0_int: fusb0-int { + rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + leds { + work_led_gpio: work_led-gpio { + rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + diy_led_gpio: diy_led-gpio { + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pcie { + pcie_perst: pcie-perst { + rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pcie_pwr_en: pcie-pwr-en { + rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + vsel1_gpio: vsel1-gpio { + rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + vsel2_gpio: vsel2-gpio { + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb-typec { + vcc5v0_typec_en: vcc5v0_typec_en { + rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb2 { + vcc5v0_host_en: vcc5v0-host-en { + rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm0 { + status = "okay"; +}; + +&pwm1 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcca1v8_s3>; + status = "okay"; +}; + +&sdio0 { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + disable-wp; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; + sd-uhs-sdr104; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-sd-highspeed; + cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; + disable-wp; + max-frequency = <150000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + mmc-hs200-1_8v; + non-removable; + status = "okay"; +}; + +&spi1 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + }; +}; + +&tcphy0 { + status = "okay"; +}; + +&tcphy1 { + status = "okay"; +}; + +&tsadc { + /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-mode = <1>; + /* tshut polarity 0:LOW 1:HIGH */ + rockchip,hw-tshut-polarity = <1>; + status = "okay"; +}; + +&u2phy0 { + status = "okay"; + + u2phy0_otg: otg-port { + status = "okay"; + }; + + u2phy0_host: host-port { + phy-supply = <&vcc5v0_host>; + status = "okay"; + }; +}; + +&u2phy1 { + status = "okay"; + + u2phy1_otg: otg-port { + status = "okay"; + }; + + u2phy1_host: host-port { + phy-supply = <&vcc5v0_host>; + status = "okay"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rk808 1>; + clock-names = "lpo"; + device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; + vbat-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc_1v8>; + }; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usbdrd3_0 { + status = "okay"; +}; + +&usbdrd_dwc3_0 { + status = "okay"; + dr_mode = "otg"; +}; + +&usbdrd3_1 { + status = "okay"; +}; + +&usbdrd_dwc3_1 { + status = "okay"; + dr_mode = "host"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts index 808ea77f951d..b4d8f60b7e44 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts @@ -84,7 +84,7 @@ }; edp_panel: edp-panel { - compatible ="lg,lp079qx1-sp0v", "simple-panel"; + compatible ="lg,lp079qx1-sp0v"; backlight = <&backlight>; enable-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index e62ea0e2b657..33cc21fcf4c1 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -291,7 +291,7 @@ status = "disabled"; }; - sdio0: dwmmc@fe310000 { + sdio0: mmc@fe310000 { compatible = "rockchip,rk3399-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xfe310000 0x0 0x4000>; @@ -307,7 +307,7 @@ status = "disabled"; }; - sdmmc: dwmmc@fe320000 { + sdmmc: mmc@fe320000 { compatible = "rockchip,rk3399-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xfe320000 0x0 0x4000>; @@ -828,6 +828,14 @@ type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&gpu_alert0>; + cooling-device = + <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; }; @@ -1887,6 +1895,7 @@ <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>; interrupt-names = "gpu", "job", "mmu"; clocks = <&cru ACLK_GPU>; + #cooling-cells = <2>; power-domains = <&power RK3399_PD_GPU>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-rock-pi-n10.dts b/arch/arm64/boot/dts/rockchip/rk3399pro-rock-pi-n10.dts new file mode 100644 index 000000000000..b42f94179538 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399pro-rock-pi-n10.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd + * Copyright (c) 2019 Radxa Limited + * Copyright (c) 2019 Amarula Solutions(India) + */ + +/dts-v1/; +#include "rk3399.dtsi" +#include "rk3399-opp.dtsi" +#include "rk3399pro-vmarc-som.dtsi" +#include <arm/rockchip-radxa-dalang-carrier.dtsi> + +/ { + model = "Radxa ROCK Pi N10"; + compatible = "radxa,rockpi-n10", "rockchip,rk3399pro"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi new file mode 100644 index 000000000000..0a516334f15f --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi @@ -0,0 +1,333 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd + * Copyright (c) 2019 Vamrs Limited + * Copyright (c) 2019 Amarula Solutions(India) + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/pwm/pwm.h> + +/ { + compatible = "vamrs,rk3399pro-vmarc-som", "rockchip,rk3399pro"; + + clkin_gmac: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "clkin_gmac"; + #clock-cells = <0>; + }; + + vcc12v_dcin: vcc12v-dcin-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_dcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vcc5v0_sys: vcc5v0-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_l>; +}; + +&emmc_phy { + status = "okay"; +}; + +&gmac { + assigned-clocks = <&cru SCLK_RMII_SRC>; + assigned-clock-parents = <&clkin_gmac>; + clock_in_out = "input"; + phy-supply = <&vcc_lan>; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; + tx_delay = <0x28>; + rx_delay = <0x11>; +}; + +&i2c0 { + clock-frequency = <400000>; + i2c-scl-rising-time-ns = <180>; + i2c-scl-falling-time-ns = <30>; + status = "okay"; + + rk809: pmic@20 { + compatible = "rockchip,rk809"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <RK_PC2 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + clock-output-names = "rk808-clkout1", "rk808-clkout2"; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc_buck5>; + vcc6-supply = <&vcc_buck5>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc5v0_sys>; + + regulators { + vdd_log: DCDC_REG1 { + regulator-name = "vdd_log"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-initial-mode = <0x2>; + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vdd_cpu_l: DCDC_REG2 { + regulator-name = "vdd_cpu_l"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-initial-mode = <0x2>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc3v3_sys: DCDC_REG4 { + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <0x2>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_buck5: DCDC_REG5 { + regulator-name = "vcc_buck5"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2200000>; + }; + }; + + vcca_0v9: LDO_REG1 { + regulator-name = "vcca_0v9"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8: LDO_REG2 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_0v9: LDO_REG3 { + regulator-name = "vcc_0v9"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vcca_1v8: LDO_REG4 { + regulator-name = "vcca_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1850000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + /* + * As per BSP, but schematic not showing any regulator + * pin for LD05. + */ + vdd1v5_dvp: LDO_REG5 { + regulator-name = "vdd1v5_dvp"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v5: LDO_REG6 { + regulator-name = "vcc_1v5"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_3v0: LDO_REG7 { + regulator-name = "vccio_3v0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd: LDO_REG8 { + regulator-name = "vccio_sd"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + /* + * As per BSP, but schematic not showing any regulator + * pin for LD09. + */ + vcc_sd: LDO_REG9 { + regulator-name = "vcc_sd"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc5v0_usb2: SWITCH_REG1 { + regulator-name = "vcc5v0_usb2"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <5000000>; + }; + }; + + vccio_3v3: vcc_lan: SWITCH_REG2 { + regulator-name = "vccio_3v3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&io_domains { + status = "okay"; + bt656-supply = <&vcca_1v8>; + sdmmc-supply = <&vccio_sd>; + gpio1830-supply = <&vccio_3v0>; +}; + +&pmu_io_domains { + status = "okay"; + pmu1830-supply = <&vcc_1v8>; +}; + +&sdhci { + bus-width = <8>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + non-removable; + status = "okay"; +}; + +&tsadc { + status = "okay"; + rockchip,hw-tshut-mode = <1>; + rockchip,hw-tshut-polarity = <1>; +}; + +&pinctrl { + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = + <1 RK_PC2 0 &pcfg_pull_up>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi index 8ec40a0b8b1e..5b18bda9c5a6 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi @@ -633,7 +633,8 @@ pinctrl-0 = <&pinctrl_nand>; clock-names = "nand", "nand_x", "ecc"; clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>; - resets = <&sys_rst 2>; + reset-names = "nand", "reg"; + resets = <&sys_rst 2>, <&sys_rst 2>; }; }; }; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi index b658f2b641e2..f2dc5f695020 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi @@ -937,7 +937,8 @@ pinctrl-0 = <&pinctrl_nand>; clock-names = "nand", "nand_x", "ecc"; clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>; - resets = <&sys_rst 2>; + reset-names = "nand", "reg"; + resets = <&sys_rst 2>, <&sys_rst 2>; }; }; }; diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi index d6f6cee4d549..73e7e1203b09 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi @@ -795,7 +795,8 @@ pinctrl-0 = <&pinctrl_nand>; clock-names = "nand", "nand_x", "ecc"; clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>; - resets = <&sys_rst 2>; + reset-names = "nand", "reg"; + resets = <&sys_rst 2>, <&sys_rst 2>; }; }; }; diff --git a/arch/arm64/boot/dts/sprd/Makefile b/arch/arm64/boot/dts/sprd/Makefile index 2bdc23804f40..f4f1f5148cc2 100644 --- a/arch/arm64/boot/dts/sprd/Makefile +++ b/arch/arm64/boot/dts/sprd/Makefile @@ -1,3 +1,4 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_SPRD) += sc9836-openphone.dtb \ - sp9860g-1h10.dtb + sp9860g-1h10.dtb \ + sp9863a-1h10.dtb diff --git a/arch/arm64/boot/dts/sprd/sc9863a.dtsi b/arch/arm64/boot/dts/sprd/sc9863a.dtsi new file mode 100644 index 000000000000..cd80756c888d --- /dev/null +++ b/arch/arm64/boot/dts/sprd/sc9863a.dtsi @@ -0,0 +1,523 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Unisoc SC9863A SoC DTS file + * + * Copyright (C) 2019, Unisoc Inc. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include "sharkl3.dtsi" + +/ { + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + core1 { + cpu = <&CPU1>; + }; + core2 { + cpu = <&CPU2>; + }; + core3 { + cpu = <&CPU3>; + }; + core4 { + cpu = <&CPU4>; + }; + core5 { + cpu = <&CPU5>; + }; + core6 { + cpu = <&CPU6>; + }; + core7 { + cpu = <&CPU7>; + }; + }; + }; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x0>; + enable-method = "psci"; + cpu-idle-states = <&CORE_PD>; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x100>; + enable-method = "psci"; + cpu-idle-states = <&CORE_PD>; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x200>; + enable-method = "psci"; + cpu-idle-states = <&CORE_PD>; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x300>; + enable-method = "psci"; + cpu-idle-states = <&CORE_PD>; + }; + + CPU4: cpu@400 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x400>; + enable-method = "psci"; + cpu-idle-states = <&CORE_PD>; + }; + + CPU5: cpu@500 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x500>; + enable-method = "psci"; + cpu-idle-states = <&CORE_PD>; + }; + + CPU6: cpu@600 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x600>; + enable-method = "psci"; + cpu-idle-states = <&CORE_PD>; + }; + + CPU7: cpu@700 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x700>; + enable-method = "psci"; + cpu-idle-states = <&CORE_PD>; + }; + }; + + idle-states { + entry-method = "arm,psci"; + CORE_PD: core-pd { + compatible = "arm,idle-state"; + entry-latency-us = <4000>; + exit-latency-us = <4000>; + min-residency-us = <10000>; + local-timer-stop; + arm,psci-suspend-param = <0x00010000>; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>, /* Physical Secure PPI */ + <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>, /* Physical Non-Secure PPI */ + <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>, /* Virtual PPI */ + <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>; /* Hipervisor PPI */ + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; + }; + + soc { + gic: interrupt-controller@14000000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + redistributor-stride = <0x0 0x20000>; /* 128KB stride */ + #redistributor-regions = <1>; + interrupt-controller; + reg = <0x0 0x14000000 0 0x20000>, /* GICD */ + <0x0 0x14040000 0 0x100000>; /* GICR */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + funnel@10001000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x10001000 0 0x1000>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel_soc_out_port: endpoint { + remote-endpoint = <&etb_in>; + }; + }; + }; + + in-ports { + port { + funnel_soc_in_port: endpoint { + remote-endpoint = + <&funnel_ca55_out_port>; + }; + }; + }; + }; + + etb@10003000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0x10003000 0 0x1000>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + in-ports { + port { + etb_in: endpoint { + remote-endpoint = + <&funnel_soc_out_port>; + }; + }; + }; + }; + + funnel@12001000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x12001000 0 0x1000>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel_little_out_port: endpoint { + remote-endpoint = + <&etf_little_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + funnel_little_in_port0: endpoint { + remote-endpoint = <&etm0_out>; + }; + }; + + port@1 { + reg = <1>; + funnel_little_in_port1: endpoint { + remote-endpoint = <&etm1_out>; + }; + }; + + port@2 { + reg = <2>; + funnel_little_in_port2: endpoint { + remote-endpoint = <&etm2_out>; + }; + }; + + port@3 { + reg = <3>; + funnel_little_in_port3: endpoint { + remote-endpoint = <&etm3_out>; + }; + }; + }; + }; + + etf@12002000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0x12002000 0 0x1000>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + out-ports { + port { + etf_little_out: endpoint { + remote-endpoint = + <&funnel_ca55_in_port0>; + }; + }; + }; + + in-port { + port { + etf_little_in: endpoint { + remote-endpoint = + <&funnel_little_out_port>; + }; + }; + }; + }; + + etf@12003000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0x12003000 0 0x1000>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + out-ports { + port { + etf_big_out: endpoint { + remote-endpoint = + <&funnel_ca55_in_port1>; + }; + }; + }; + + in-ports { + port { + etf_big_in: endpoint { + remote-endpoint = + <&funnel_big_out_port>; + }; + }; + }; + }; + + funnel@12004000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x12004000 0 0x1000>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel_ca55_out_port: endpoint { + remote-endpoint = + <&funnel_soc_in_port>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + funnel_ca55_in_port0: endpoint { + remote-endpoint = + <&etf_little_out>; + }; + }; + + port@1 { + reg = <1>; + funnel_ca55_in_port1: endpoint { + remote-endpoint = + <&etf_big_out>; + }; + }; + }; + }; + + funnel@12005000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x12005000 0 0x1000>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel_big_out_port: endpoint { + remote-endpoint = + <&etf_big_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + funnel_big_in_port0: endpoint { + remote-endpoint = <&etm4_out>; + }; + }; + + port@1 { + reg = <1>; + funnel_big_in_port1: endpoint { + remote-endpoint = <&etm5_out>; + }; + }; + + port@2 { + reg = <2>; + funnel_big_in_port2: endpoint { + remote-endpoint = <&etm6_out>; + }; + }; + + port@3 { + reg = <3>; + funnel_big_in_port3: endpoint { + remote-endpoint = <&etm7_out>; + }; + }; + }; + }; + + etm@13040000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x13040000 0 0x1000>; + cpu = <&CPU0>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + out-ports { + port { + etm0_out: endpoint { + remote-endpoint = + <&funnel_little_in_port0>; + }; + }; + }; + }; + + etm@13140000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x13140000 0 0x1000>; + cpu = <&CPU1>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + out-ports { + port { + etm1_out: endpoint { + remote-endpoint = + <&funnel_little_in_port1>; + }; + }; + }; + }; + + etm@13240000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x13240000 0 0x1000>; + cpu = <&CPU2>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + out-ports { + port { + etm2_out: endpoint { + remote-endpoint = + <&funnel_little_in_port2>; + }; + }; + }; + }; + + etm@13340000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x13340000 0 0x1000>; + cpu = <&CPU3>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + out-ports { + port { + etm3_out: endpoint { + remote-endpoint = + <&funnel_little_in_port3>; + }; + }; + }; + }; + + etm@13440000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x13440000 0 0x1000>; + cpu = <&CPU4>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + out-ports { + port { + etm4_out: endpoint { + remote-endpoint = + <&funnel_big_in_port0>; + }; + }; + }; + }; + + etm@13540000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x13540000 0 0x1000>; + cpu = <&CPU5>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + out-ports { + port { + etm5_out: endpoint { + remote-endpoint = + <&funnel_big_in_port1>; + }; + }; + }; + }; + + etm@13640000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x13640000 0 0x1000>; + cpu = <&CPU6>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + out-ports { + port { + etm6_out: endpoint { + remote-endpoint = + <&funnel_big_in_port2>; + }; + }; + }; + }; + + etm@13740000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x13740000 0 0x1000>; + cpu = <&CPU7>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + out-ports { + port { + etm7_out: endpoint { + remote-endpoint = + <&funnel_big_in_port3>; + }; + }; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/sprd/sharkl3.dtsi b/arch/arm64/boot/dts/sprd/sharkl3.dtsi new file mode 100644 index 000000000000..0222128b10f7 --- /dev/null +++ b/arch/arm64/boot/dts/sprd/sharkl3.dtsi @@ -0,0 +1,78 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Unisoc Sharkl3 platform DTS file + * + * Copyright (C) 2019, Unisoc Inc. + */ + +/ { + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + soc: soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + apb@70000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x70000000 0x10000000>; + + uart0: serial@0 { + compatible = "sprd,sc9863a-uart", + "sprd,sc9836-uart"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ext_26m>; + status = "disabled"; + }; + + uart1: serial@100000 { + compatible = "sprd,sc9863a-uart", + "sprd,sc9836-uart"; + reg = <0x100000 0x100>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ext_26m>; + status = "disabled"; + }; + + uart2: serial@200000 { + compatible = "sprd,sc9863a-uart", + "sprd,sc9836-uart"; + reg = <0x200000 0x100>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ext_26m>; + status = "disabled"; + }; + + uart3: serial@300000 { + compatible = "sprd,sc9863a-uart", + "sprd,sc9836-uart"; + reg = <0x300000 0x100>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ext_26m>; + status = "disabled"; + }; + + uart4: serial@400000 { + compatible = "sprd,sc9863a-uart", + "sprd,sc9836-uart"; + reg = <0x400000 0x100>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ext_26m>; + status = "disabled"; + }; + }; + }; + + ext_26m: ext-26m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + clock-output-names = "ext-26m"; + }; +}; diff --git a/arch/arm64/boot/dts/sprd/sp9863a-1h10.dts b/arch/arm64/boot/dts/sprd/sp9863a-1h10.dts new file mode 100644 index 000000000000..5c32c1596337 --- /dev/null +++ b/arch/arm64/boot/dts/sprd/sp9863a-1h10.dts @@ -0,0 +1,39 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Unisoc SP9863A-1h10 boards DTS file + * + * Copyright (C) 2019, Unisoc Inc. + */ + +/dts-v1/; + +#include "sc9863a.dtsi" + +/ { + model = "Spreadtrum SP9863A-1H10 Board"; + + compatible = "sprd,sp9863a-1h10", "sprd,sc9863a"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x80000000>; + }; + + chosen { + stdout-path = "serial1:115200n8"; + bootargs = "earlycon"; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi index efb24579922c..e5df20a2d2f9 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi @@ -51,17 +51,6 @@ }; }; - secure_proxy_main: mailbox@32c00000 { - compatible = "ti,am654-secure-proxy"; - #mbox-cells = <1>; - reg-names = "target_data", "rt", "scfg"; - reg = <0x00 0x32c00000 0x00 0x100000>, - <0x00 0x32400000 0x00 0x100000>, - <0x00 0x32800000 0x00 0x100000>; - interrupt-names = "rx_011"; - interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; - }; - serdes0: serdes@900000 { compatible = "ti,phy-am654-serdes"; reg = <0x0 0x900000 0x0 0x2000>; @@ -385,11 +374,15 @@ ti,sci-rm-range-girq = <0x1>; }; - cbass_main_navss: interconnect0 { - compatible = "simple-bus"; + main_navss { + compatible = "simple-mfd"; #address-cells = <2>; #size-cells = <2>; ranges; + dma-coherent; + dma-ranges; + + ti,sci-dev-id = <118>; intr_main_navss: interrupt-controller1 { compatible = "ti,sci-intr"; @@ -414,6 +407,17 @@ ti,sci-rm-range-global-event = <0x1>; }; + secure_proxy_main: mailbox@32c00000 { + compatible = "ti,am654-secure-proxy"; + #mbox-cells = <1>; + reg-names = "target_data", "rt", "scfg"; + reg = <0x00 0x32c00000 0x00 0x100000>, + <0x00 0x32400000 0x00 0x100000>, + <0x00 0x32800000 0x00 0x100000>; + interrupt-names = "rx_011"; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + }; + hwspinlock: spinlock@30e00000 { compatible = "ti,am654-hwspinlock"; reg = <0x00 0x30e00000 0x00 0x1000>; @@ -527,6 +531,41 @@ ti,mbox-num-fifos = <16>; interrupt-parent = <&intr_main_navss>; }; + + ringacc: ringacc@3c000000 { + compatible = "ti,am654-navss-ringacc"; + reg = <0x0 0x3c000000 0x0 0x400000>, + <0x0 0x38000000 0x0 0x400000>, + <0x0 0x31120000 0x0 0x100>, + <0x0 0x33000000 0x0 0x40000>; + reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target"; + ti,num-rings = <818>; + ti,sci-rm-range-gp-rings = <0x2>; /* GP ring range */ + ti,dma-ring-reset-quirk; + ti,sci = <&dmsc>; + ti,sci-dev-id = <187>; + msi-parent = <&inta_main_udmass>; + }; + + main_udmap: dma-controller@31150000 { + compatible = "ti,am654-navss-main-udmap"; + reg = <0x0 0x31150000 0x0 0x100>, + <0x0 0x34000000 0x0 0x100000>, + <0x0 0x35000000 0x0 0x100000>; + reg-names = "gcfg", "rchanrt", "tchanrt"; + msi-parent = <&inta_main_udmass>; + #dma-cells = <1>; + + ti,sci = <&dmsc>; + ti,sci-dev-id = <188>; + ti,ringacc = <&ringacc>; + + ti,sci-rm-range-tchan = <0x1>, /* TX_HCHAN */ + <0x2>; /* TX_CHAN */ + ti,sci-rm-range-rchan = <0x4>, /* RX_HCHAN */ + <0x5>; /* RX_CHAN */ + ti,sci-rm-range-rflow = <0x6>; /* GP RFLOW */ + }; }; main_gpio0: main_gpio0@600000 { @@ -624,4 +663,83 @@ dma-coherent; interrupts = <GIC_SPI 355 IRQ_TYPE_EDGE_RISING>; }; + + mcasp0: mcasp@2b00000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x0 0x02b00000 0x0 0x2000>, + <0x0 0x02b08000 0x0 0x1000>; + reg-names = "mpu","dat"; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>; + dma-names = "tx", "rx"; + + clocks = <&k3_clks 104 0>; + clock-names = "fck"; + power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>; + + status = "disabled"; + }; + + mcasp1: mcasp@2b10000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x0 0x02b10000 0x0 0x2000>, + <0x0 0x02b18000 0x0 0x1000>; + reg-names = "mpu","dat"; + interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + dmas = <&main_udmap 0xc401>, <&main_udmap 0x4401>; + dma-names = "tx", "rx"; + + clocks = <&k3_clks 105 0>; + clock-names = "fck"; + power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>; + + status = "disabled"; + }; + + mcasp2: mcasp@2b20000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x0 0x02b20000 0x0 0x2000>, + <0x0 0x02b28000 0x0 0x1000>; + reg-names = "mpu","dat"; + interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + dmas = <&main_udmap 0xc402>, <&main_udmap 0x4402>; + dma-names = "tx", "rx"; + + clocks = <&k3_clks 106 0>; + clock-names = "fck"; + power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>; + + status = "disabled"; + }; + + cal: cal@6f03000 { + compatible = "ti,am654-cal"; + reg = <0x0 0x06f03000 0x0 0x400>, + <0x0 0x06f03800 0x0 0x40>; + reg-names = "cal_top", + "cal_rx_core0"; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + ti,camerrx-control = <&scm_conf 0x40c0>; + clock-names = "fck"; + clocks = <&k3_clks 2 0>; + power-domains = <&k3_pds 2 TI_SCI_PD_EXCLUSIVE>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + csi2_0: port@0 { + reg = <0>; + }; + }; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi index 7bdf5342f58f..92629cbdc184 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi @@ -6,6 +6,14 @@ */ &cbass_mcu { + mcu_conf: scm_conf@40f00000 { + compatible = "syscon", "simple-mfd"; + reg = <0x0 0x40f00000 0x0 0x20000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x40f00000 0x20000>; + }; + mcu_uart0: serial@40a00000 { compatible = "ti,am654-uart"; reg = <0x00 0x40a00000 0x00 0x100>; @@ -95,4 +103,88 @@ compatible = "ti,am654-adc", "ti,am3359-adc"; }; }; + + mcu_navss { + compatible = "simple-mfd"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + dma-coherent; + dma-ranges; + + ti,sci-dev-id = <119>; + + mcu_ringacc: ringacc@2b800000 { + compatible = "ti,am654-navss-ringacc"; + reg = <0x0 0x2b800000 0x0 0x400000>, + <0x0 0x2b000000 0x0 0x400000>, + <0x0 0x28590000 0x0 0x100>, + <0x0 0x2a500000 0x0 0x40000>; + reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target"; + ti,num-rings = <286>; + ti,sci-rm-range-gp-rings = <0x2>; /* GP ring range */ + ti,dma-ring-reset-quirk; + ti,sci = <&dmsc>; + ti,sci-dev-id = <195>; + msi-parent = <&inta_main_udmass>; + }; + + mcu_udmap: dma-controller@285c0000 { + compatible = "ti,am654-navss-mcu-udmap"; + reg = <0x0 0x285c0000 0x0 0x100>, + <0x0 0x2a800000 0x0 0x40000>, + <0x0 0x2aa00000 0x0 0x40000>; + reg-names = "gcfg", "rchanrt", "tchanrt"; + msi-parent = <&inta_main_udmass>; + #dma-cells = <1>; + + ti,sci = <&dmsc>; + ti,sci-dev-id = <194>; + ti,ringacc = <&mcu_ringacc>; + + ti,sci-rm-range-tchan = <0x1>, /* TX_HCHAN */ + <0x2>; /* TX_CHAN */ + ti,sci-rm-range-rchan = <0x3>, /* RX_HCHAN */ + <0x4>; /* RX_CHAN */ + ti,sci-rm-range-rflow = <0x5>; /* GP RFLOW */ + }; + }; + + fss: fss@47000000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ospi0: spi@47040000 { + compatible = "ti,am654-ospi", "cdns,qspi-nor"; + reg = <0x0 0x47040000 0x0 0x100>, + <0x5 0x00000000 0x1 0x0000000>; + interrupts = <GIC_SPI 552 IRQ_TYPE_LEVEL_HIGH>; + cdns,fifo-depth = <256>; + cdns,fifo-width = <4>; + cdns,trigger-address = <0x0>; + clocks = <&k3_clks 248 0>; + assigned-clocks = <&k3_clks 248 0>; + assigned-clock-parents = <&k3_clks 248 2>; + assigned-clock-rates = <166666666>; + power-domains = <&k3_pds 248 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <1>; + #size-cells = <0>; + }; + + ospi1: spi@47050000 { + compatible = "ti,am654-ospi", "cdns,qspi-nor"; + reg = <0x0 0x47050000 0x0 0x100>, + <0x7 0x00000000 0x1 0x00000000>; + interrupts = <GIC_SPI 553 IRQ_TYPE_LEVEL_HIGH>; + cdns,fifo-depth = <256>; + cdns,fifo-width = <4>; + cdns,trigger-address = <0x0>; + clocks = <&k3_clks 249 6>; + power-domains = <&k3_pds 249 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am65.dtsi b/arch/arm64/boot/dts/ti/k3-am65.dtsi index 6dfccd5d56c8..aea36e29dd32 100644 --- a/arch/arm64/boot/dts/ti/k3-am65.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65.dtsi @@ -74,13 +74,18 @@ /* MCUSS Range */ <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, <0x00 0x40200000 0x00 0x40200000 0x00 0x00900100>, + <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */ <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00080000>, <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, - <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>; + <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, + <0x00 0x50000000 0x00 0x50000000 0x00 0x8000000>, + <0x00 0x70000000 0x00 0x70000000 0x00 0x200000>, + <0x05 0x00000000 0x05 0x00000000 0x01 0x0000000>, + <0x07 0x00000000 0x07 0x00000000 0x01 0x0000000>; cbass_mcu: interconnect@28380000 { compatible = "simple-bus"; @@ -88,13 +93,17 @@ #size-cells = <2>; ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/ <0x00 0x40200000 0x00 0x40200000 0x00 0x00900100>, /* First peripheral window */ + <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */ <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */ <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */ <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00080000>, /* MCU SRAM */ <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP */ <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */ <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */ - <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>; /* OSPI space 1 */ + <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI space 1 */ + <0x00 0x50000000 0x00 0x50000000 0x00 0x8000000>, /* FSS OSPI0 data region 1 */ + <0x05 0x00000000 0x05 0x00000000 0x01 0x0000000>, /* FSS OSPI0 data region 3*/ + <0x07 0x00000000 0x07 0x00000000 0x01 0x0000000>; /* FSS OSPI1 data region 3*/ cbass_wakeup: interconnect@42040000 { compatible = "simple-bus"; diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts index 8a85b482ad31..1700996800eb 100644 --- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts +++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts @@ -53,6 +53,12 @@ gpios = <&wkup_gpio0 27 GPIO_ACTIVE_LOW>; }; }; + + clk_ov5640_fixed: clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; }; &wkup_pmx0 { @@ -69,6 +75,29 @@ AM65X_WKUP_IOPAD(0x003c, PIN_INPUT, 7) /* (P2) WKUP_GPIO0_27 */ >; }; + + mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins_default { + pinctrl-single,pins = < + AM65X_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* (V1) MCU_OSPI0_CLK */ + AM65X_WKUP_IOPAD(0x0008, PIN_INPUT, 0) /* (U2) MCU_OSPI0_DQS */ + AM65X_WKUP_IOPAD(0x000c, PIN_INPUT, 0) /* (U4) MCU_OSPI0_D0 */ + AM65X_WKUP_IOPAD(0x0010, PIN_INPUT, 0) /* (U5) MCU_OSPI0_D1 */ + AM65X_WKUP_IOPAD(0x0014, PIN_INPUT, 0) /* (T2) MCU_OSPI0_D2 */ + AM65X_WKUP_IOPAD(0x0018, PIN_INPUT, 0) /* (T3) MCU_OSPI0_D3 */ + AM65X_WKUP_IOPAD(0x001c, PIN_INPUT, 0) /* (T4) MCU_OSPI0_D4 */ + AM65X_WKUP_IOPAD(0x0020, PIN_INPUT, 0) /* (T5) MCU_OSPI0_D5 */ + AM65X_WKUP_IOPAD(0x0024, PIN_INPUT, 0) /* (R2) MCU_OSPI0_D6 */ + AM65X_WKUP_IOPAD(0x0028, PIN_INPUT, 0) /* (R3) MCU_OSPI0_D7 */ + AM65X_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /* (R4) MCU_OSPI0_CSn0 */ + >; + }; + + wkup_pca554_default: wkup_pca554_default { + pinctrl-single,pins = < + AM65X_WKUP_IOPAD(0x0034, PIN_INPUT, 7) /* (T1) MCU_OSPI1_CLK.WKUP_GPIO0_25 */ + + >; + }; }; &main_pmx0 { @@ -164,6 +193,12 @@ reg = <0x39>; gpio-controller; #gpio-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&wkup_pca554_default>; + interrupt-parent = <&wkup_gpio0>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; }; }; @@ -184,6 +219,23 @@ pinctrl-names = "default"; pinctrl-0 = <&main_i2c1_pins_default>; clock-frequency = <400000>; + + ov5640@3c { + compatible = "ovti,ov5640"; + reg = <0x3c>; + + clocks = <&clk_ov5640_fixed>; + clock-names = "xclk"; + + port { + csi2_cam0: endpoint { + remote-endpoint = <&csi2_phy0>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; + }; &main_i2c2 { @@ -339,3 +391,31 @@ &mailbox0_cluster11 { status = "disabled"; }; + +&ospi0 { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_fss0_ospi0_pins_default>; + + flash@0{ + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <8>; + spi-max-frequency = <40000000>; + cdns,tshsl-ns = <60>; + cdns,tsd2d-ns = <60>; + cdns,tchsh-ns = <60>; + cdns,tslch-ns = <60>; + cdns,read-delay = <0>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&csi2_0 { + csi2_phy0: endpoint { + remote-endpoint = <&csi2_cam0>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts index 2a3cd6174504..7a5c3d4adadd 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts +++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts @@ -67,6 +67,46 @@ J721E_IOPAD(0x214, PIN_OUTPUT, 4) /* (V4) MCAN1_TX.USB1_DRVVBUS */ >; }; + + main_i2c1_exp4_pins_default: main-i2c1-exp4-pins-default { + pinctrl-single,pins = < + J721E_IOPAD(0x230, PIN_INPUT, 7) /* (U2) ECAP0_IN_APWM_OUT.GPIO1_11 */ + >; + }; + + main_i2c0_pins_default: main-i2c0-pins-default { + pinctrl-single,pins = < + J721E_IOPAD(0x220, PIN_INPUT_PULLUP, 0) /* (AC5) I2C0_SCL */ + J721E_IOPAD(0x224, PIN_INPUT_PULLUP, 0) /* (AA5) I2C0_SDA */ + >; + }; + + main_i2c1_pins_default: main-i2c1-pins-default { + pinctrl-single,pins = < + J721E_IOPAD(0x228, PIN_INPUT_PULLUP, 0) /* (Y6) I2C1_SCL */ + J721E_IOPAD(0x22c, PIN_INPUT_PULLUP, 0) /* (AA6) I2C1_SDA */ + >; + }; + + main_i2c3_pins_default: main-i2c3-pins-default { + pinctrl-single,pins = < + J721E_IOPAD(0x270, PIN_INPUT_PULLUP, 4) /* (T26) MMC2_CLK.I2C3_SCL */ + J721E_IOPAD(0x274, PIN_INPUT_PULLUP, 4) /* (T25) MMC2_CMD.I2C3_SDA */ + >; + }; + + main_i2c6_pins_default: main-i2c6-pins-default { + pinctrl-single,pins = < + J721E_IOPAD(0x1d0, PIN_INPUT_PULLUP, 2) /* (AA3) SPI0_D1.I2C6_SCL */ + J721E_IOPAD(0x1e4, PIN_INPUT_PULLUP, 2) /* (Y2) SPI1_D1.I2C6_SDA */ + >; + }; + + main_i2c1_exp4_pins_default: main-i2c1-exp4-pins-default { + pinctrl-single,pins = < + J721E_IOPAD(0x230, PIN_INPUT, 7) /* (U2) ECAP0_IN_APWM_OUT.GPIO1_11 */ + >; + }; }; &wkup_pmx0 { @@ -75,6 +115,19 @@ J721E_WKUP_IOPAD(0xcc, PIN_INPUT, 7) /* (G28) WKUP_GPIO0_7 */ >; }; + + mcu_fss0_ospi1_pins_default: mcu-fss0-ospi1-pins-default { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0x34, PIN_OUTPUT, 0) /* (F22) MCU_OSPI1_CLK */ + J721E_WKUP_IOPAD(0x50, PIN_OUTPUT, 0) /* (C22) MCU_OSPI1_CSn0 */ + J721E_WKUP_IOPAD(0x40, PIN_INPUT, 0) /* (D22) MCU_OSPI1_D0 */ + J721E_WKUP_IOPAD(0x44, PIN_INPUT, 0) /* (G22) MCU_OSPI1_D1 */ + J721E_WKUP_IOPAD(0x48, PIN_INPUT, 0) /* (D23) MCU_OSPI1_D2 */ + J721E_WKUP_IOPAD(0x4c, PIN_INPUT, 0) /* (C23) MCU_OSPI1_D3 */ + J721E_WKUP_IOPAD(0x3c, PIN_INPUT, 0) /* (B23) MCU_OSPI1_DQS */ + J721E_WKUP_IOPAD(0x38, PIN_INPUT, 0) /* (A23) MCU_OSPI1_LBCLKO */ + >; + }; }; &wkup_uart0 { @@ -279,3 +332,100 @@ dr_mode = "host"; maximum-speed = "high-speed"; }; + +&ospi1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_fss0_ospi1_pins_default>; + + flash@0{ + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + spi-max-frequency = <40000000>; + cdns,tshsl-ns = <60>; + cdns,tsd2d-ns = <60>; + cdns,tchsh-ns = <60>; + cdns,tslch-ns = <60>; + cdns,read-delay = <2>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&tscadc0 { + adc { + ti,adc-channels = <0 1 2 3 4 5 6 7>; + }; +}; + +&tscadc1 { + adc { + ti,adc-channels = <0 1 2 3 4 5 6 7>; + }; +}; + +&main_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c0_pins_default>; + clock-frequency = <400000>; + + exp1: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + + exp2: gpio@22 { + compatible = "ti,tca6424"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&main_i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c1_pins_default>; + clock-frequency = <400000>; + + exp4: gpio@20 { + compatible = "ti,tca6408"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c1_exp4_pins_default>; + interrupt-parent = <&main_gpio1>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + }; +}; + +&main_i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c3_pins_default>; + clock-frequency = <400000>; + + exp3: gpio@20 { + compatible = "ti,tca6408"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&main_i2c6 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c6_pins_default>; + clock-frequency = <400000>; + + exp5: gpio@20 { + compatible = "ti,tca6408"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi index 1e4c2b78d66d..0b9d14b838a1 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi @@ -40,16 +40,6 @@ }; }; - smmu0: smmu@36600000 { - compatible = "arm,smmu-v3"; - reg = <0x0 0x36600000 0x0 0x100000>; - interrupt-parent = <&gic500>; - interrupts = <GIC_SPI 772 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 768 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "eventq", "gerror"; - #iommu-cells = <1>; - }; - main_gpio_intr: interrupt-controller0 { compatible = "ti,sci-intr"; ti,intr-trigger-type = <1>; @@ -61,11 +51,15 @@ ti,sci-rm-range-girq = <0x1>; }; - cbass_main_navss: interconnect0 { - compatible = "simple-bus"; + main_navss { + compatible = "simple-mfd"; #address-cells = <2>; #size-cells = <2>; ranges; + dma-coherent; + dma-ranges; + + ti,sci-dev-id = <199>; main_navss_intr: interrupt-controller1 { compatible = "ti,sci-intr"; @@ -90,6 +84,27 @@ ti,sci-rm-range-global-event = <0xd>; }; + secure_proxy_main: mailbox@32c00000 { + compatible = "ti,am654-secure-proxy"; + #mbox-cells = <1>; + reg-names = "target_data", "rt", "scfg"; + reg = <0x00 0x32c00000 0x00 0x100000>, + <0x00 0x32400000 0x00 0x100000>, + <0x00 0x32800000 0x00 0x100000>; + interrupt-names = "rx_011"; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + }; + + smmu0: smmu@36600000 { + compatible = "arm,smmu-v3"; + reg = <0x0 0x36600000 0x0 0x100000>; + interrupt-parent = <&gic500>; + interrupts = <GIC_SPI 772 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 768 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "eventq", "gerror"; + #iommu-cells = <1>; + }; + hwspinlock: spinlock@30e00000 { compatible = "ti,am654-hwspinlock"; reg = <0x00 0x30e00000 0x00 0x1000>; @@ -203,17 +218,42 @@ ti,mbox-num-fifos = <16>; interrupt-parent = <&main_navss_intr>; }; - }; - secure_proxy_main: mailbox@32c00000 { - compatible = "ti,am654-secure-proxy"; - #mbox-cells = <1>; - reg-names = "target_data", "rt", "scfg"; - reg = <0x00 0x32c00000 0x00 0x100000>, - <0x00 0x32400000 0x00 0x100000>, - <0x00 0x32800000 0x00 0x100000>; - interrupt-names = "rx_011"; - interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + main_ringacc: ringacc@3c000000 { + compatible = "ti,am654-navss-ringacc"; + reg = <0x0 0x3c000000 0x0 0x400000>, + <0x0 0x38000000 0x0 0x400000>, + <0x0 0x31120000 0x0 0x100>, + <0x0 0x33000000 0x0 0x40000>; + reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target"; + ti,num-rings = <1024>; + ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */ + ti,sci = <&dmsc>; + ti,sci-dev-id = <211>; + msi-parent = <&main_udmass_inta>; + }; + + main_udmap: dma-controller@31150000 { + compatible = "ti,j721e-navss-main-udmap"; + reg = <0x0 0x31150000 0x0 0x100>, + <0x0 0x34000000 0x0 0x100000>, + <0x0 0x35000000 0x0 0x100000>; + reg-names = "gcfg", "rchanrt", "tchanrt"; + msi-parent = <&main_udmass_inta>; + #dma-cells = <1>; + + ti,sci = <&dmsc>; + ti,sci-dev-id = <212>; + ti,ringacc = <&main_ringacc>; + + ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */ + <0x0f>, /* TX_HCHAN */ + <0x10>; /* TX_UHCHAN */ + ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */ + <0x0b>, /* RX_HCHAN */ + <0x0c>; /* RX_UHCHAN */ + ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */ + }; }; main_pmx0: pinmux@11c000 { @@ -596,4 +636,331 @@ dr_mode = "otg"; }; }; + + main_i2c0: i2c@2000000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x0 0x2000000 0x0 0x100>; + interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 187 0>; + power-domains = <&k3_pds 187 TI_SCI_PD_SHARED>; + }; + + main_i2c1: i2c@2010000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x0 0x2010000 0x0 0x100>; + interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 188 0>; + power-domains = <&k3_pds 188 TI_SCI_PD_EXCLUSIVE>; + }; + + main_i2c2: i2c@2020000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x0 0x2020000 0x0 0x100>; + interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 189 0>; + power-domains = <&k3_pds 189 TI_SCI_PD_EXCLUSIVE>; + }; + + main_i2c3: i2c@2030000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x0 0x2030000 0x0 0x100>; + interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 190 0>; + power-domains = <&k3_pds 190 TI_SCI_PD_EXCLUSIVE>; + }; + + main_i2c4: i2c@2040000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x0 0x2040000 0x0 0x100>; + interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 191 0>; + power-domains = <&k3_pds 191 TI_SCI_PD_EXCLUSIVE>; + }; + + main_i2c5: i2c@2050000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x0 0x2050000 0x0 0x100>; + interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 192 0>; + power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>; + }; + + main_i2c6: i2c@2060000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x0 0x2060000 0x0 0x100>; + interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 193 0>; + power-domains = <&k3_pds 193 TI_SCI_PD_EXCLUSIVE>; + }; + + ufs_wrapper: ufs-wrapper@4e80000 { + compatible = "ti,j721e-ufs"; + reg = <0x0 0x4e80000 0x0 0x100>; + power-domains = <&k3_pds 277 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 277 1>; + assigned-clocks = <&k3_clks 277 1>; + assigned-clock-parents = <&k3_clks 277 4>; + ranges; + #address-cells = <2>; + #size-cells = <2>; + + ufs@4e84000 { + compatible = "cdns,ufshc-m31-16nm", "jedec,ufs-2.0"; + reg = <0x0 0x4e84000 0x0 0x10000>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + freq-table-hz = <250000000 250000000>, <19200000 19200000>, <19200000 19200000>; + clocks = <&k3_clks 277 0>, <&k3_clks 277 1>, <&k3_clks 277 1>; + clock-names = "core_clk", "phy_clk", "ref_clk"; + dma-coherent; + }; + }; + + mcasp0: mcasp@2b00000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x0 0x02b00000 0x0 0x2000>, + <0x0 0x02b08000 0x0 0x1000>; + reg-names = "mpu","dat"; + interrupts = <GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 545 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>; + dma-names = "tx", "rx"; + + clocks = <&k3_clks 174 1>; + clock-names = "fck"; + power-domains = <&k3_pds 174 TI_SCI_PD_EXCLUSIVE>; + + status = "disabled"; + }; + + mcasp1: mcasp@2b10000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x0 0x02b10000 0x0 0x2000>, + <0x0 0x02b18000 0x0 0x1000>; + reg-names = "mpu","dat"; + interrupts = <GIC_SPI 546 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 547 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + dmas = <&main_udmap 0xc401>, <&main_udmap 0x4401>; + dma-names = "tx", "rx"; + + clocks = <&k3_clks 175 1>; + clock-names = "fck"; + power-domains = <&k3_pds 175 TI_SCI_PD_EXCLUSIVE>; + + status = "disabled"; + }; + + mcasp2: mcasp@2b20000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x0 0x02b20000 0x0 0x2000>, + <0x0 0x02b28000 0x0 0x1000>; + reg-names = "mpu","dat"; + interrupts = <GIC_SPI 548 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 549 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + dmas = <&main_udmap 0xc402>, <&main_udmap 0x4402>; + dma-names = "tx", "rx"; + + clocks = <&k3_clks 176 1>; + clock-names = "fck"; + power-domains = <&k3_pds 176 TI_SCI_PD_EXCLUSIVE>; + + status = "disabled"; + }; + + mcasp3: mcasp@2b30000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x0 0x02b30000 0x0 0x2000>, + <0x0 0x02b38000 0x0 0x1000>; + reg-names = "mpu","dat"; + interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + dmas = <&main_udmap 0xc500>, <&main_udmap 0x4500>; + dma-names = "tx", "rx"; + + clocks = <&k3_clks 177 1>; + clock-names = "fck"; + power-domains = <&k3_pds 177 TI_SCI_PD_EXCLUSIVE>; + + status = "disabled"; + }; + + mcasp4: mcasp@2b40000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x0 0x02b40000 0x0 0x2000>, + <0x0 0x02b48000 0x0 0x1000>; + reg-names = "mpu","dat"; + interrupts = <GIC_SPI 552 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 553 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + dmas = <&main_udmap 0xc501>, <&main_udmap 0x4501>; + dma-names = "tx", "rx"; + + clocks = <&k3_clks 178 1>; + clock-names = "fck"; + power-domains = <&k3_pds 178 TI_SCI_PD_EXCLUSIVE>; + + status = "disabled"; + }; + + mcasp5: mcasp@2b50000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x0 0x02b50000 0x0 0x2000>, + <0x0 0x02b58000 0x0 0x1000>; + reg-names = "mpu","dat"; + interrupts = <GIC_SPI 554 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 555 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + dmas = <&main_udmap 0xc502>, <&main_udmap 0x4502>; + dma-names = "tx", "rx"; + + clocks = <&k3_clks 179 1>; + clock-names = "fck"; + power-domains = <&k3_pds 179 TI_SCI_PD_EXCLUSIVE>; + + status = "disabled"; + }; + + mcasp6: mcasp@2b60000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x0 0x02b60000 0x0 0x2000>, + <0x0 0x02b68000 0x0 0x1000>; + reg-names = "mpu","dat"; + interrupts = <GIC_SPI 556 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 557 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + dmas = <&main_udmap 0xc503>, <&main_udmap 0x4503>; + dma-names = "tx", "rx"; + + clocks = <&k3_clks 180 1>; + clock-names = "fck"; + power-domains = <&k3_pds 180 TI_SCI_PD_EXCLUSIVE>; + + status = "disabled"; + }; + + mcasp7: mcasp@2b70000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x0 0x02b70000 0x0 0x2000>, + <0x0 0x02b78000 0x0 0x1000>; + reg-names = "mpu","dat"; + interrupts = <GIC_SPI 558 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 559 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + dmas = <&main_udmap 0xc504>, <&main_udmap 0x4504>; + dma-names = "tx", "rx"; + + clocks = <&k3_clks 181 1>; + clock-names = "fck"; + power-domains = <&k3_pds 181 TI_SCI_PD_EXCLUSIVE>; + + status = "disabled"; + }; + + mcasp8: mcasp@2b80000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x0 0x02b80000 0x0 0x2000>, + <0x0 0x02b88000 0x0 0x1000>; + reg-names = "mpu","dat"; + interrupts = <GIC_SPI 560 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 561 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + dmas = <&main_udmap 0xc505>, <&main_udmap 0x4505>; + dma-names = "tx", "rx"; + + clocks = <&k3_clks 182 1>; + clock-names = "fck"; + power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>; + + status = "disabled"; + }; + + mcasp9: mcasp@2b90000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x0 0x02b90000 0x0 0x2000>, + <0x0 0x02b98000 0x0 0x1000>; + reg-names = "mpu","dat"; + interrupts = <GIC_SPI 562 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 563 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + dmas = <&main_udmap 0xc506>, <&main_udmap 0x4506>; + dma-names = "tx", "rx"; + + clocks = <&k3_clks 183 1>; + clock-names = "fck"; + power-domains = <&k3_pds 183 TI_SCI_PD_EXCLUSIVE>; + + status = "disabled"; + }; + + mcasp10: mcasp@2ba0000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x0 0x02ba0000 0x0 0x2000>, + <0x0 0x02ba8000 0x0 0x1000>; + reg-names = "mpu","dat"; + interrupts = <GIC_SPI 564 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 565 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + dmas = <&main_udmap 0xc507>, <&main_udmap 0x4507>; + dma-names = "tx", "rx"; + + clocks = <&k3_clks 184 1>; + clock-names = "fck"; + power-domains = <&k3_pds 184 TI_SCI_PD_EXCLUSIVE>; + + status = "disabled"; + }; + + mcasp11: mcasp@2bb0000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x0 0x02bb0000 0x0 0x2000>, + <0x0 0x02bb8000 0x0 0x1000>; + reg-names = "mpu","dat"; + interrupts = <GIC_SPI 566 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 567 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + dmas = <&main_udmap 0xc508>, <&main_udmap 0x4508>; + dma-names = "tx", "rx"; + + clocks = <&k3_clks 185 1>; + clock-names = "fck"; + power-domains = <&k3_pds 185 TI_SCI_PD_EXCLUSIVE>; + + status = "disabled"; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi index 555dc7b7aedc..16c874bfd49a 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi @@ -121,4 +121,153 @@ clocks = <&k3_clks 114 0>; clock-names = "gpio"; }; + + mcu_i2c0: i2c@40b00000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x0 0x40b00000 0x0 0x100>; + interrupts = <GIC_SPI 852 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 194 0>; + power-domains = <&k3_pds 194 TI_SCI_PD_EXCLUSIVE>; + }; + + mcu_i2c1: i2c@40b10000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x0 0x40b10000 0x0 0x100>; + interrupts = <GIC_SPI 853 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 195 0>; + power-domains = <&k3_pds 195 TI_SCI_PD_EXCLUSIVE>; + }; + + wkup_i2c0: i2c@42120000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x0 0x42120000 0x0 0x100>; + interrupts = <GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 197 0>; + power-domains = <&k3_pds 197 TI_SCI_PD_SHARED>; + }; + + fss: fss@47000000 { + compatible = "simple-bus"; + reg = <0x0 0x47000000 0x0 0x100>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ospi0: spi@47040000 { + compatible = "ti,am654-ospi"; + reg = <0x0 0x47040000 0x0 0x100>, + <0x5 0x00000000 0x1 0x0000000>; + interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>; + cdns,fifo-depth = <256>; + cdns,fifo-width = <4>; + cdns,trigger-address = <0x0>; + clocks = <&k3_clks 103 0>; + assigned-clocks = <&k3_clks 103 0>; + assigned-clock-parents = <&k3_clks 103 2>; + assigned-clock-rates = <166666666>; + power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <1>; + #size-cells = <0>; + }; + + ospi1: spi@47050000 { + compatible = "ti,am654-ospi"; + reg = <0x0 0x47050000 0x0 0x100>, + <0x7 0x00000000 0x1 0x00000000>; + interrupts = <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>; + cdns,fifo-depth = <256>; + cdns,fifo-width = <4>; + cdns,trigger-address = <0x0>; + clocks = <&k3_clks 104 0>; + power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + tscadc0: tscadc@40200000 { + compatible = "ti,am3359-tscadc"; + reg = <0x0 0x40200000 0x0 0x1000>; + interrupts = <GIC_SPI 860 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 0 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 0 1>; + assigned-clocks = <&k3_clks 0 3>; + assigned-clock-rates = <60000000>; + clock-names = "adc_tsc_fck"; + + adc { + #io-channel-cells = <1>; + compatible = "ti,am3359-adc"; + }; + }; + + tscadc1: tscadc@40210000 { + compatible = "ti,am3359-tscadc"; + reg = <0x0 0x40210000 0x0 0x1000>; + interrupts = <GIC_SPI 861 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 1 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 1 1>; + assigned-clocks = <&k3_clks 1 3>; + assigned-clock-rates = <60000000>; + clock-names = "adc_tsc_fck"; + + adc { + #io-channel-cells = <1>; + compatible = "ti,am3359-adc"; + }; + }; + + mcu_navss { + compatible = "simple-mfd"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + dma-coherent; + dma-ranges; + + ti,sci-dev-id = <232>; + + mcu_ringacc: ringacc@2b800000 { + compatible = "ti,am654-navss-ringacc"; + reg = <0x0 0x2b800000 0x0 0x400000>, + <0x0 0x2b000000 0x0 0x400000>, + <0x0 0x28590000 0x0 0x100>, + <0x0 0x2a500000 0x0 0x40000>; + reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target"; + ti,num-rings = <286>; + ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */ + ti,sci = <&dmsc>; + ti,sci-dev-id = <235>; + msi-parent = <&main_udmass_inta>; + }; + + mcu_udmap: dma-controller@285c0000 { + compatible = "ti,j721e-navss-mcu-udmap"; + reg = <0x0 0x285c0000 0x0 0x100>, + <0x0 0x2a800000 0x0 0x40000>, + <0x0 0x2aa00000 0x0 0x40000>; + reg-names = "gcfg", "rchanrt", "tchanrt"; + msi-parent = <&main_udmass_inta>; + #dma-cells = <1>; + + ti,sci = <&dmsc>; + ti,sci-dev-id = <236>; + ti,ringacc = <&mcu_ringacc>; + + ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */ + <0x0f>; /* TX_HCHAN */ + ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */ + <0x0b>; /* RX_HCHAN */ + ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */ + }; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi index 1884fc70148f..7680109ca60a 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi @@ -27,3 +27,48 @@ }; }; }; + +&wkup_pmx0 { + wkup_i2c0_pins_default: wkup_i2c0_pins_default { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0xf8, PIN_INPUT_PULLUP, 0) /* (J25) WKUP_I2C0_SCL */ + J721E_WKUP_IOPAD(0xfc, PIN_INPUT_PULLUP, 0) /* (H24) WKUP_I2C0_SDA */ + >; + }; + + mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins-default { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* MCU_OSPI0_CLK */ + J721E_WKUP_IOPAD(0x0008, PIN_INPUT, 0) /* MCU_OSPI0_DQS */ + J721E_WKUP_IOPAD(0x000c, PIN_INPUT, 0) /* MCU_OSPI0_D0 */ + J721E_WKUP_IOPAD(0x0010, PIN_INPUT, 0) /* MCU_OSPI0_D1 */ + J721E_WKUP_IOPAD(0x0014, PIN_INPUT, 0) /* MCU_OSPI0_D2 */ + J721E_WKUP_IOPAD(0x0018, PIN_INPUT, 0) /* MCU_OSPI0_D3 */ + J721E_WKUP_IOPAD(0x001c, PIN_INPUT, 0) /* MCU_OSPI0_D4 */ + J721E_WKUP_IOPAD(0x0020, PIN_INPUT, 0) /* MCU_OSPI0_D5 */ + J721E_WKUP_IOPAD(0x0024, PIN_INPUT, 0) /* MCU_OSPI0_D6 */ + J721E_WKUP_IOPAD(0x0028, PIN_INPUT, 0) /* MCU_OSPI0_D7 */ + J721E_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /* MCU_OSPI0_CSn0 */ + >; + }; +}; + +&ospi0 { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_fss0_ospi0_pins_default>; + + flash@0{ + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <8>; + spi-max-frequency = <40000000>; + cdns,tshsl-ns = <60>; + cdns,tsd2d-ns = <60>; + cdns,tchsh-ns = <60>; + cdns,tslch-ns = <60>; + cdns,read-delay = <0>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j721e.dtsi b/arch/arm64/boot/dts/ti/k3-j721e.dtsi index ee5470edb435..027bd1febafa 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e.dtsi @@ -130,7 +130,7 @@ <0x00 0x06000000 0x00 0x06000000 0x00 0x00400000>, /* USBSS0 */ <0x00 0x06400000 0x00 0x06400000 0x00 0x00400000>, /* USBSS1 */ <0x00 0x01000000 0x00 0x01000000 0x00 0x0af02400>, /* Most peripherals */ - <0x00 0x30800000 0x00 0x30800000 0x00 0x0bc00000>, /* MAIN NAVSS */ + <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>, /* MAIN NAVSS */ <0x00 0x0d000000 0x00 0x0d000000 0x00 0x01000000>, /* PCIe Core*/ <0x00 0x10000000 0x00 0x10000000 0x00 0x10000000>, /* PCIe DAT */ <0x00 0x64800000 0x00 0x64800000 0x00 0x00800000>, /* C71 */ diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi new file mode 100644 index 000000000000..9868ca15dfc5 --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi @@ -0,0 +1,222 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Clock specification for Xilinx ZynqMP + * + * (C) Copyright 2017 - 2019, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + */ + +#include <dt-bindings/clock/xlnx-zynqmp-clk.h> +/ { + pss_ref_clk: pss_ref_clk { + u-boot,dm-pre-reloc; + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <33333333>; + }; + + video_clk: video_clk { + u-boot,dm-pre-reloc; + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; + }; + + pss_alt_ref_clk: pss_alt_ref_clk { + u-boot,dm-pre-reloc; + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + gt_crx_ref_clk: gt_crx_ref_clk { + u-boot,dm-pre-reloc; + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <108000000>; + }; + + aux_ref_clk: aux_ref_clk { + u-boot,dm-pre-reloc; + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; + }; +}; + +&can0 { + clocks = <&zynqmp_clk CAN0_REF>, <&zynqmp_clk LPD_LSBUS>; +}; + +&can1 { + clocks = <&zynqmp_clk CAN1_REF>, <&zynqmp_clk LPD_LSBUS>; +}; + +&cpu0 { + clocks = <&zynqmp_clk ACPU>; +}; + +&fpd_dma_chan1 { + clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>; +}; + +&fpd_dma_chan2 { + clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>; +}; + +&fpd_dma_chan3 { + clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>; +}; + +&fpd_dma_chan4 { + clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>; +}; + +&fpd_dma_chan5 { + clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>; +}; + +&fpd_dma_chan6 { + clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>; +}; + +&fpd_dma_chan7 { + clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>; +}; + +&fpd_dma_chan8 { + clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>; +}; + +&lpd_dma_chan1 { + clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>; +}; + +&lpd_dma_chan2 { + clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>; +}; + +&lpd_dma_chan3 { + clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>; +}; + +&lpd_dma_chan4 { + clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>; +}; + +&lpd_dma_chan5 { + clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>; +}; + +&lpd_dma_chan6 { + clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>; +}; + +&lpd_dma_chan7 { + clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>; +}; + +&lpd_dma_chan8 { + clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>; +}; + +&gem0 { + clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM0_REF>, + <&zynqmp_clk GEM0_TX>, <&zynqmp_clk GEM0_RX>, + <&zynqmp_clk GEM_TSU>; + clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; +}; + +&gem1 { + clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM1_REF>, + <&zynqmp_clk GEM1_TX>, <&zynqmp_clk GEM1_RX>, + <&zynqmp_clk GEM_TSU>; + clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; +}; + +&gem2 { + clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM2_REF>, + <&zynqmp_clk GEM2_TX>, <&zynqmp_clk GEM2_RX>, + <&zynqmp_clk GEM_TSU>; + clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; +}; + +&gem3 { + clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM3_REF>, + <&zynqmp_clk GEM3_TX>, <&zynqmp_clk GEM3_RX>, + <&zynqmp_clk GEM_TSU>; + clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; +}; + +&gpio { + clocks = <&zynqmp_clk LPD_LSBUS>; +}; + +&i2c0 { + clocks = <&zynqmp_clk I2C0_REF>; +}; + +&i2c1 { + clocks = <&zynqmp_clk I2C1_REF>; +}; + +&pcie { + clocks = <&zynqmp_clk PCIE_REF>; +}; + +&sata { + clocks = <&zynqmp_clk SATA_REF>; +}; + +&sdhci0 { + clocks = <&zynqmp_clk SDIO0_REF>, <&zynqmp_clk LPD_LSBUS>; +}; + +&sdhci1 { + clocks = <&zynqmp_clk SDIO1_REF>, <&zynqmp_clk LPD_LSBUS>; +}; + +&spi0 { + clocks = <&zynqmp_clk SPI0_REF>, <&zynqmp_clk LPD_LSBUS>; +}; + +&spi1 { + clocks = <&zynqmp_clk SPI1_REF>, <&zynqmp_clk LPD_LSBUS>; +}; + +&ttc0 { + clocks = <&zynqmp_clk LPD_LSBUS>; +}; + +&ttc1 { + clocks = <&zynqmp_clk LPD_LSBUS>; +}; + +&ttc2 { + clocks = <&zynqmp_clk LPD_LSBUS>; +}; + +&ttc3 { + clocks = <&zynqmp_clk LPD_LSBUS>; +}; + +&uart0 { + clocks = <&zynqmp_clk UART0_REF>, <&zynqmp_clk LPD_LSBUS>; +}; + +&uart1 { + clocks = <&zynqmp_clk UART1_REF>, <&zynqmp_clk LPD_LSBUS>; +}; + +&usb0 { + clocks = <&zynqmp_clk USB0_BUS_REF>, <&zynqmp_clk USB3_DUAL_REF>; +}; + +&usb1 { + clocks = <&zynqmp_clk USB1_BUS_REF>, <&zynqmp_clk USB3_DUAL_REF>; +}; + +&watchdog0 { + clocks = <&zynqmp_clk WDT>; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-clk.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp-clk.dtsi deleted file mode 100644 index 306ad2157c98..000000000000 --- a/arch/arm64/boot/dts/xilinx/zynqmp-clk.dtsi +++ /dev/null @@ -1,213 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Clock specification for Xilinx ZynqMP - * - * (C) Copyright 2015 - 2018, Xilinx, Inc. - * - * Michal Simek <michal.simek@xilinx.com> - */ - -/ { - clk100: clk100 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <100000000>; - }; - - clk125: clk125 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <125000000>; - }; - - clk200: clk200 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <200000000>; - }; - - clk250: clk250 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <250000000>; - }; - - clk300: clk300 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <300000000>; - }; - - clk600: clk600 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <600000000>; - }; - - dp_aclk: clock0 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <100000000>; - clock-accuracy = <100>; - }; - - dp_aud_clk: clock1 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <24576000>; - clock-accuracy = <100>; - }; - - dpdma_clk: dpdma-clk { - compatible = "fixed-clock"; - #clock-cells = <0x0>; - clock-frequency = <533000000>; - }; - - drm_clock: drm-clock { - compatible = "fixed-clock"; - #clock-cells = <0x0>; - clock-frequency = <262750000>; - clock-accuracy = <0x64>; - }; -}; - -&can0 { - clocks = <&clk100 &clk100>; -}; - -&can1 { - clocks = <&clk100 &clk100>; -}; - -&fpd_dma_chan1 { - clocks = <&clk600>, <&clk100>; -}; - -&fpd_dma_chan2 { - clocks = <&clk600>, <&clk100>; -}; - -&fpd_dma_chan3 { - clocks = <&clk600>, <&clk100>; -}; - -&fpd_dma_chan4 { - clocks = <&clk600>, <&clk100>; -}; - -&fpd_dma_chan5 { - clocks = <&clk600>, <&clk100>; -}; - -&fpd_dma_chan6 { - clocks = <&clk600>, <&clk100>; -}; - -&fpd_dma_chan7 { - clocks = <&clk600>, <&clk100>; -}; - -&fpd_dma_chan8 { - clocks = <&clk600>, <&clk100>; -}; - -&lpd_dma_chan1 { - clocks = <&clk600>, <&clk100>; -}; - -&lpd_dma_chan2 { - clocks = <&clk600>, <&clk100>; -}; - -&lpd_dma_chan3 { - clocks = <&clk600>, <&clk100>; -}; - -&lpd_dma_chan4 { - clocks = <&clk600>, <&clk100>; -}; - -&lpd_dma_chan5 { - clocks = <&clk600>, <&clk100>; -}; - -&lpd_dma_chan6 { - clocks = <&clk600>, <&clk100>; -}; - -&lpd_dma_chan7 { - clocks = <&clk600>, <&clk100>; -}; - -&lpd_dma_chan8 { - clocks = <&clk600>, <&clk100>; -}; - -&gem0 { - clocks = <&clk125>, <&clk125>, <&clk125>; -}; - -&gem1 { - clocks = <&clk125>, <&clk125>, <&clk125>; -}; - -&gem2 { - clocks = <&clk125>, <&clk125>, <&clk125>; -}; - -&gem3 { - clocks = <&clk125>, <&clk125>, <&clk125>; -}; - -&gpio { - clocks = <&clk100>; -}; - -&i2c0 { - clocks = <&clk100>; -}; - -&i2c1 { - clocks = <&clk100>; -}; - -&sata { - clocks = <&clk250>; -}; - -&sdhci0 { - clocks = <&clk200 &clk200>; -}; - -&sdhci1 { - clocks = <&clk200 &clk200>; -}; - -&spi0 { - clocks = <&clk200 &clk200>; -}; - -&spi1 { - clocks = <&clk200 &clk200>; -}; - -&uart0 { - clocks = <&clk100 &clk100>; -}; - -&uart1 { - clocks = <&clk100 &clk100>; -}; - -&usb0 { - clocks = <&clk250>, <&clk250>; -}; - -&usb1 { - clocks = <&clk250>, <&clk250>; -}; - -&watchdog0 { - clocks = <&clk250>; -}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts index 0f7b4cf6078e..2e05fa416955 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZC1232 * - * (C) Copyright 2017 - 2018, Xilinx, Inc. + * (C) Copyright 2017 - 2019, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> */ @@ -10,7 +10,7 @@ /dts-v1/; #include "zynqmp.dtsi" -#include "zynqmp-clk.dtsi" +#include "zynqmp-clk-ccf.dtsi" / { model = "ZynqMP ZC1232 RevA"; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts index 9092828f92ec..3d0aaa02f184 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZC1254 * - * (C) Copyright 2015 - 2018, Xilinx, Inc. + * (C) Copyright 2015 - 2019, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> * Siva Durga Prasad Paladugu <sivadur@xilinx.com> @@ -11,7 +11,7 @@ /dts-v1/; #include "zynqmp.dtsi" -#include "zynqmp-clk.dtsi" +#include "zynqmp-clk-ccf.dtsi" / { model = "ZynqMP ZC1254 RevA"; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dts index 4f404c580eec..66a90483b004 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZC1275 * - * (C) Copyright 2017 - 2018, Xilinx, Inc. + * (C) Copyright 2017 - 2019, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> * Siva Durga Prasad Paladugu <sivadur@xilinx.com> @@ -11,7 +11,7 @@ /dts-v1/; #include "zynqmp.dtsi" -#include "zynqmp-clk.dtsi" +#include "zynqmp-clk-ccf.dtsi" / { model = "ZynqMP ZC1275 RevA"; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts index 9a3e39d1294f..69f6e4610739 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP zc1751-xm015-dc1 * - * (C) Copyright 2015 - 2018, Xilinx, Inc. + * (C) Copyright 2015 - 2019, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> */ @@ -10,7 +10,7 @@ /dts-v1/; #include "zynqmp.dtsi" -#include "zynqmp-clk.dtsi" +#include "zynqmp-clk-ccf.dtsi" #include <dt-bindings/gpio/gpio.h> / { @@ -73,7 +73,7 @@ status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; - phy0: phy@0 { + phy0: ethernet-phy@0 { reg = <0>; }; }; @@ -128,4 +128,5 @@ /* ULPI SMSC USB3320 */ &usb0 { status = "okay"; + dr_mode = "host"; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts index 2421ec71a201..4a86efa32d68 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP zc1751-xm016-dc2 * - * (C) Copyright 2015 - 2018, Xilinx, Inc. + * (C) Copyright 2015 - 2019, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> */ @@ -10,7 +10,7 @@ /dts-v1/; #include "zynqmp.dtsi" -#include "zynqmp-clk.dtsi" +#include "zynqmp-clk-ccf.dtsi" #include <dt-bindings/gpio/gpio.h> / { @@ -84,7 +84,7 @@ status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; - phy0: phy@5 { + phy0: ethernet-phy@5 { reg = <5>; ti,rx-internal-delay = <0x8>; ti,tx-internal-delay = <0xa>; @@ -123,7 +123,7 @@ status = "okay"; num-cs = <1>; - spi0_flash0: flash0@0 { + spi0_flash0: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "sst,sst25wf080", "jedec,spi-nor"; @@ -141,7 +141,7 @@ status = "okay"; num-cs = <1>; - spi1_flash0: flash0@0 { + spi1_flash0: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "atmel,at45db041e", "atmel,at45", "atmel,dataflash"; @@ -158,6 +158,7 @@ /* ULPI SMSC USB3320 */ &usb1 { status = "okay"; + dr_mode = "host"; }; &uart0 { diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts index 7a49deeae647..4ea6ef5a7f2b 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP zc1751-xm017-dc3 * - * (C) Copyright 2016 - 2018, Xilinx, Inc. + * (C) Copyright 2016 - 2019, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> */ @@ -10,7 +10,7 @@ /dts-v1/; #include "zynqmp.dtsi" -#include "zynqmp-clk.dtsi" +#include "zynqmp-clk-ccf.dtsi" / { model = "ZynqMP zc1751-xm017-dc3 RevA"; @@ -73,7 +73,7 @@ status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; - phy0: phy@0 { /* VSC8211 */ + phy0: ethernet-phy@0 { /* VSC8211 */ reg = <0>; }; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts index 54c7b4f1d1e4..2366cd9f091a 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP zc1751-xm018-dc4 * - * (C) Copyright 2015 - 2018, Xilinx, Inc. + * (C) Copyright 2015 - 2019, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> */ @@ -10,7 +10,7 @@ /dts-v1/; #include "zynqmp.dtsi" -#include "zynqmp-clk.dtsi" +#include "zynqmp-clk-ccf.dtsi" / { model = "ZynqMP zc1751-xm018-dc4"; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts index b8b5ff13818d..41934e3525c6 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP zc1751-xm019-dc5 * - * (C) Copyright 2015 - 2018, Xilinx, Inc. + * (C) Copyright 2015 - 2019, Xilinx, Inc. * * Siva Durga Prasad <siva.durga.paladugu@xilinx.com> * Michal Simek <michal.simek@xilinx.com> @@ -11,7 +11,7 @@ /dts-v1/; #include "zynqmp.dtsi" -#include "zynqmp-clk.dtsi" +#include "zynqmp-clk-ccf.dtsi" #include <dt-bindings/gpio/gpio.h> / { @@ -74,7 +74,7 @@ status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; - phy0: phy@0 { + phy0: ethernet-phy@0 { reg = <0>; }; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts index e5699d0d91e4..d60110ad8367 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZCU100 revC * - * (C) Copyright 2016 - 2018, Xilinx, Inc. + * (C) Copyright 2016 - 2019, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> * Nathalie Chan King Choy @@ -11,7 +11,7 @@ /dts-v1/; #include "zynqmp.dtsi" -#include "zynqmp-clk.dtsi" +#include "zynqmp-clk-ccf.dtsi" #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> @@ -103,6 +103,11 @@ reset-gpios = <&gpio 7 GPIO_ACTIVE_LOW>; /* WIFI_EN */ post-power-on-delay-ms = <10>; }; + + ina226 { + compatible = "iio-hwmon"; + io-channels = <&u35 0>, <&u35 1>, <&u35 2>, <&u35 3>; + }; }; &dcc { @@ -191,8 +196,9 @@ #size-cells = <0>; reg = <5>; /* PS_PMBUS */ - ina226@40 { /* u35 */ + u35: ina226@40 { /* u35 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; reg = <0x40>; shunt-resistor = <10000>; /* MIO31 is alert which should be routed to PMUFW */ @@ -226,7 +232,6 @@ &sdhci0 { status = "okay"; no-1-8-v; - broken-cd; /* CD has to be enabled by default */ disable-wp; }; @@ -251,11 +256,13 @@ &spi0 { /* Low Speed connector */ status = "okay"; label = "LS-SPI0"; + num-cs = <1>; }; &spi1 { /* High Speed connector */ status = "okay"; label = "HS-SPI1"; + num-cs = <1>; }; &uart0 { @@ -274,11 +281,13 @@ /* ULPI SMSC USB3320 */ &usb0 { status = "okay"; + dr_mode = "peripheral"; }; /* ULPI SMSC USB3320 */ &usb1 { status = "okay"; + dr_mode = "host"; }; &watchdog0 { diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts index 2a3b66547c6d..4f801721564f 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZCU102 RevA * - * (C) Copyright 2015 - 2018, Xilinx, Inc. + * (C) Copyright 2015 - 2019, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> */ @@ -10,7 +10,7 @@ /dts-v1/; #include "zynqmp.dtsi" -#include "zynqmp-clk.dtsi" +#include "zynqmp-clk-ccf.dtsi" #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/gpio.h> @@ -59,6 +59,79 @@ linux,default-trigger = "heartbeat"; }; }; + + ina226-u76 { + compatible = "iio-hwmon"; + io-channels = <&u76 0>, <&u76 1>, <&u76 2>, <&u76 3>; + }; + ina226-u77 { + compatible = "iio-hwmon"; + io-channels = <&u77 0>, <&u77 1>, <&u77 2>, <&u77 3>; + }; + ina226-u78 { + compatible = "iio-hwmon"; + io-channels = <&u78 0>, <&u78 1>, <&u78 2>, <&u78 3>; + }; + ina226-u87 { + compatible = "iio-hwmon"; + io-channels = <&u87 0>, <&u87 1>, <&u87 2>, <&u87 3>; + }; + ina226-u85 { + compatible = "iio-hwmon"; + io-channels = <&u85 0>, <&u85 1>, <&u85 2>, <&u85 3>; + }; + ina226-u86 { + compatible = "iio-hwmon"; + io-channels = <&u86 0>, <&u86 1>, <&u86 2>, <&u86 3>; + }; + ina226-u93 { + compatible = "iio-hwmon"; + io-channels = <&u93 0>, <&u93 1>, <&u93 2>, <&u93 3>; + }; + ina226-u88 { + compatible = "iio-hwmon"; + io-channels = <&u88 0>, <&u88 1>, <&u88 2>, <&u88 3>; + }; + ina226-u15 { + compatible = "iio-hwmon"; + io-channels = <&u15 0>, <&u15 1>, <&u15 2>, <&u15 3>; + }; + ina226-u92 { + compatible = "iio-hwmon"; + io-channels = <&u92 0>, <&u92 1>, <&u92 2>, <&u92 3>; + }; + ina226-u79 { + compatible = "iio-hwmon"; + io-channels = <&u79 0>, <&u79 1>, <&u79 2>, <&u79 3>; + }; + ina226-u81 { + compatible = "iio-hwmon"; + io-channels = <&u81 0>, <&u81 1>, <&u81 2>, <&u81 3>; + }; + ina226-u80 { + compatible = "iio-hwmon"; + io-channels = <&u80 0>, <&u80 1>, <&u80 2>, <&u80 3>; + }; + ina226-u84 { + compatible = "iio-hwmon"; + io-channels = <&u84 0>, <&u84 1>, <&u84 2>, <&u84 3>; + }; + ina226-u16 { + compatible = "iio-hwmon"; + io-channels = <&u16 0>, <&u16 1>, <&u16 2>, <&u16 3>; + }; + ina226-u65 { + compatible = "iio-hwmon"; + io-channels = <&u65 0>, <&u65 1>, <&u65 2>, <&u65 3>; + }; + ina226-u74 { + compatible = "iio-hwmon"; + io-channels = <&u74 0>, <&u74 1>, <&u74 2>, <&u74 3>; + }; + ina226-u75 { + compatible = "iio-hwmon"; + io-channels = <&u75 0>, <&u75 1>, <&u75 2>, <&u75 3>; + }; }; &can1 { @@ -105,7 +178,7 @@ status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; - phy0: phy@21 { + phy0: ethernet-phy@21 { reg = <21>; ti,rx-internal-delay = <0x8>; ti,tx-internal-delay = <0xa>; @@ -125,21 +198,11 @@ tca6416_u97: gpio@20 { compatible = "ti,tca6416"; reg = <0x20>; - gpio-controller; + gpio-controller; /* IRQ not connected */ #gpio-cells = <2>; - /* - * IRQ not connected - * Lines: - * 0 - PS_GTR_LAN_SEL0 - * 1 - PS_GTR_LAN_SEL1 - * 2 - PS_GTR_LAN_SEL2 - * 3 - PS_GTR_LAN_SEL3 - * 4 - PCI_CLK_DIR_SEL - * 5 - IIC_MUX_RESET_B - * 6 - GEM3_EXP_RESET_B - * 7, 10 - 17 - not connected - */ - + gpio-line-names = "PS_GTR_LAN_SEL0", "PS_GTR_LAN_SEL1", "PS_GTR_LAN_SEL2", "PS_GTR_LAN_SEL3", + "PCI_CLK_DIR_SEL", "IIC_MUX_RESET_B", "GEM3_EXP_RESET_B", + "", "", "", "", "", "", "", "", ""; gtr-sel0 { gpio-hog; gpios = <0 0>; @@ -169,27 +232,12 @@ tca6416_u61: gpio@21 { compatible = "ti,tca6416"; reg = <0x21>; - gpio-controller; + gpio-controller; /* IRQ not connected */ #gpio-cells = <2>; - /* - * IRQ not connected - * Lines: - * 0 - VCCPSPLL_EN - * 1 - MGTRAVCC_EN - * 2 - MGTRAVTT_EN - * 3 - VCCPSDDRPLL_EN - * 4 - MIO26_PMU_INPUT_LS - * 5 - PL_PMBUS_ALERT - * 6 - PS_PMBUS_ALERT - * 7 - MAXIM_PMBUS_ALERT - * 10 - PL_DDR4_VTERM_EN - * 11 - PL_DDR4_VPP_2V5_EN - * 12 - PS_DIMM_VDDQ_TO_PSVCCO_ON - * 13 - PS_DIMM_SUSPEND_EN - * 14 - PS_DDR4_VTERM_EN - * 15 - PS_DDR4_VPP_2V5_EN - * 16 - 17 - not connected - */ + gpio-line-names = "VCCPSPLL_EN", "MGTRAVCC_EN", "MGTRAVTT_EN", "VCCPSDDRPLL_EN", "MIO26_PMU_INPUT_LS", + "PL_PMBUS_ALERT", "PS_PMBUS_ALERT", "MAXIM_PMBUS_ALERT", "PL_DDR4_VTERM_EN", + "PL_DDR4_VPP_2V5_EN", "PS_DIMM_VDDQ_TO_PSVCCO_ON", "PS_DIMM_SUSPEND_EN", + "PS_DDR4_VTERM_EN", "PS_DDR4_VPP_2V5_EN", "", ""; }; i2c-mux@75 { /* u60 */ @@ -202,53 +250,73 @@ #size-cells = <0>; reg = <0>; /* PS_PMBUS */ - ina226@40 { /* u76 */ + u76: ina226@40 { /* u76 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u76"; reg = <0x40>; shunt-resistor = <5000>; }; - ina226@41 { /* u77 */ + u77: ina226@41 { /* u77 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u77"; reg = <0x41>; shunt-resistor = <5000>; }; - ina226@42 { /* u78 */ + u78: ina226@42 { /* u78 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u78"; reg = <0x42>; shunt-resistor = <5000>; }; - ina226@43 { /* u87 */ + u87: ina226@43 { /* u87 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u87"; reg = <0x43>; shunt-resistor = <5000>; }; - ina226@44 { /* u85 */ + u85: ina226@44 { /* u85 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u85"; reg = <0x44>; shunt-resistor = <5000>; }; - ina226@45 { /* u86 */ + u86: ina226@45 { /* u86 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u86"; reg = <0x45>; shunt-resistor = <5000>; }; - ina226@46 { /* u93 */ + u93: ina226@46 { /* u93 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u93"; reg = <0x46>; shunt-resistor = <5000>; }; - ina226@47 { /* u88 */ + u88: ina226@47 { /* u88 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u88"; reg = <0x47>; shunt-resistor = <5000>; }; - ina226@4a { /* u15 */ + u15: ina226@4a { /* u15 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u15"; reg = <0x4a>; shunt-resistor = <5000>; }; - ina226@4b { /* u92 */ + u92: ina226@4b { /* u92 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u92"; reg = <0x4b>; shunt-resistor = <5000>; }; @@ -258,43 +326,59 @@ #size-cells = <0>; reg = <1>; /* PL_PMBUS */ - ina226@40 { /* u79 */ + u79: ina226@40 { /* u79 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u79"; reg = <0x40>; shunt-resistor = <2000>; }; - ina226@41 { /* u81 */ + u81: ina226@41 { /* u81 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u81"; reg = <0x41>; shunt-resistor = <5000>; }; - ina226@42 { /* u80 */ + u80: ina226@42 { /* u80 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u80"; reg = <0x42>; shunt-resistor = <5000>; }; - ina226@43 { /* u84 */ + u84: ina226@43 { /* u84 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u84"; reg = <0x43>; shunt-resistor = <5000>; }; - ina226@44 { /* u16 */ + u16: ina226@44 { /* u16 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u16"; reg = <0x44>; shunt-resistor = <5000>; }; - ina226@45 { /* u65 */ + u65: ina226@45 { /* u65 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u65"; reg = <0x45>; shunt-resistor = <5000>; }; - ina226@46 { /* u74 */ + u74: ina226@46 { /* u74 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u74"; reg = <0x46>; shunt-resistor = <5000>; }; - ina226@47 { /* u75 */ + u75: ina226@47 { /* u75 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u75"; reg = <0x47>; shunt-resistor = <5000>; }; @@ -414,6 +498,7 @@ temperature-stability = <50>; factory-fout = <300000000>; clock-frequency = <300000000>; + clock-output-names = "si570_user"; }; }; i2c@3 { @@ -427,6 +512,7 @@ temperature-stability = <50>; /* copy from zc702 */ factory-fout = <156250000>; clock-frequency = <148500000>; + clock-output-names = "si570_mgt"; }; }; i2c@4 { @@ -540,6 +626,7 @@ /* ULPI SMSC USB3320 */ &usb0 { status = "okay"; + dr_mode = "host"; }; &watchdog0 { diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts index 1780ed237daf..d9ad8a4b20d3 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts @@ -16,7 +16,7 @@ &gem3 { phy-handle = <&phyc>; - phyc: phy@c { + phyc: ethernet-phy@c { reg = <0xc>; ti,rx-internal-delay = <0x8>; ti,tx-internal-delay = <0xa>; @@ -24,7 +24,7 @@ ti,dp83867-rxctrl-strap-quirk; }; /* Cleanup from RevA */ - /delete-node/ phy@21; + /delete-node/ ethernet-phy@21; }; /* Fix collision with u61 */ diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts index 8f456146409f..7a4614e3f5fa 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZCU104 * - * (C) Copyright 2017 - 2018, Xilinx, Inc. + * (C) Copyright 2017 - 2019, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> */ @@ -10,7 +10,7 @@ /dts-v1/; #include "zynqmp.dtsi" -#include "zynqmp-clk.dtsi" +#include "zynqmp-clk-ccf.dtsi" #include <dt-bindings/gpio/gpio.h> / { @@ -50,7 +50,7 @@ status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; - phy0: phy@c { + phy0: ethernet-phy@c { reg = <0xc>; ti,rx-internal-delay = <0x8>; ti,tx-internal-delay = <0xa>; @@ -118,9 +118,9 @@ #address-cells = <1>; #size-cells = <0>; reg = <4>; - tca6416_u97: gpio@21 { + tca6416_u97: gpio@20 { compatible = "ti,tca6416"; - reg = <0x21>; + reg = <0x20>; gpio-controller; #gpio-cells = <2>; /* @@ -189,6 +189,7 @@ /* ULPI SMSC USB3320 */ &usb0 { status = "okay"; + dr_mode = "host"; }; &watchdog0 { diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts index 93ce7eb81498..6e9efe233838 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZCU106 * - * (C) Copyright 2016, Xilinx, Inc. + * (C) Copyright 2016 - 2019, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> */ @@ -10,7 +10,7 @@ /dts-v1/; #include "zynqmp.dtsi" -#include "zynqmp-clk.dtsi" +#include "zynqmp-clk-ccf.dtsi" #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/gpio.h> @@ -59,6 +59,79 @@ linux,default-trigger = "heartbeat"; }; }; + + ina226-u76 { + compatible = "iio-hwmon"; + io-channels = <&u76 0>, <&u76 1>, <&u76 2>, <&u76 3>; + }; + ina226-u77 { + compatible = "iio-hwmon"; + io-channels = <&u77 0>, <&u77 1>, <&u77 2>, <&u77 3>; + }; + ina226-u78 { + compatible = "iio-hwmon"; + io-channels = <&u78 0>, <&u78 1>, <&u78 2>, <&u78 3>; + }; + ina226-u87 { + compatible = "iio-hwmon"; + io-channels = <&u87 0>, <&u87 1>, <&u87 2>, <&u87 3>; + }; + ina226-u85 { + compatible = "iio-hwmon"; + io-channels = <&u85 0>, <&u85 1>, <&u85 2>, <&u85 3>; + }; + ina226-u86 { + compatible = "iio-hwmon"; + io-channels = <&u86 0>, <&u86 1>, <&u86 2>, <&u86 3>; + }; + ina226-u93 { + compatible = "iio-hwmon"; + io-channels = <&u93 0>, <&u93 1>, <&u93 2>, <&u93 3>; + }; + ina226-u88 { + compatible = "iio-hwmon"; + io-channels = <&u88 0>, <&u88 1>, <&u88 2>, <&u88 3>; + }; + ina226-u15 { + compatible = "iio-hwmon"; + io-channels = <&u15 0>, <&u15 1>, <&u15 2>, <&u15 3>; + }; + ina226-u92 { + compatible = "iio-hwmon"; + io-channels = <&u92 0>, <&u92 1>, <&u92 2>, <&u92 3>; + }; + ina226-u79 { + compatible = "iio-hwmon"; + io-channels = <&u79 0>, <&u79 1>, <&u79 2>, <&u79 3>; + }; + ina226-u81 { + compatible = "iio-hwmon"; + io-channels = <&u81 0>, <&u81 1>, <&u81 2>, <&u81 3>; + }; + ina226-u80 { + compatible = "iio-hwmon"; + io-channels = <&u80 0>, <&u80 1>, <&u80 2>, <&u80 3>; + }; + ina226-u84 { + compatible = "iio-hwmon"; + io-channels = <&u84 0>, <&u84 1>, <&u84 2>, <&u84 3>; + }; + ina226-u16 { + compatible = "iio-hwmon"; + io-channels = <&u16 0>, <&u16 1>, <&u16 2>, <&u16 3>; + }; + ina226-u65 { + compatible = "iio-hwmon"; + io-channels = <&u65 0>, <&u65 1>, <&u65 2>, <&u65 3>; + }; + ina226-u74 { + compatible = "iio-hwmon"; + io-channels = <&u74 0>, <&u74 1>, <&u74 2>, <&u74 3>; + }; + ina226-u75 { + compatible = "iio-hwmon"; + io-channels = <&u75 0>, <&u75 1>, <&u75 2>, <&u75 3>; + }; }; &can1 { @@ -106,7 +179,7 @@ status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; - phy0: phy@c { + phy0: ethernet-phy@c { reg = <0xc>; ti,rx-internal-delay = <0x8>; ti,tx-internal-delay = <0xa>; @@ -177,53 +250,73 @@ #size-cells = <0>; reg = <0>; /* PS_PMBUS */ - ina226@40 { /* u76 */ + u76: ina226@40 { /* u76 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u76"; reg = <0x40>; shunt-resistor = <5000>; }; - ina226@41 { /* u77 */ + u77: ina226@41 { /* u77 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u77"; reg = <0x41>; shunt-resistor = <5000>; }; - ina226@42 { /* u78 */ + u78: ina226@42 { /* u78 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u78"; reg = <0x42>; shunt-resistor = <5000>; }; - ina226@43 { /* u87 */ + u87: ina226@43 { /* u87 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u87"; reg = <0x43>; shunt-resistor = <5000>; }; - ina226@44 { /* u85 */ + u85: ina226@44 { /* u85 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u85"; reg = <0x44>; shunt-resistor = <5000>; }; - ina226@45 { /* u86 */ + u86: ina226@45 { /* u86 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u86"; reg = <0x45>; shunt-resistor = <5000>; }; - ina226@46 { /* u93 */ + u93: ina226@46 { /* u93 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u93"; reg = <0x46>; shunt-resistor = <5000>; }; - ina226@47 { /* u88 */ + u88: ina226@47 { /* u88 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u88"; reg = <0x47>; shunt-resistor = <5000>; }; - ina226@4a { /* u15 */ + u15: ina226@4a { /* u15 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u15"; reg = <0x4a>; shunt-resistor = <5000>; }; - ina226@4b { /* u92 */ + u92: ina226@4b { /* u92 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u92"; reg = <0x4b>; shunt-resistor = <5000>; }; @@ -233,43 +326,59 @@ #size-cells = <0>; reg = <1>; /* PL_PMBUS */ - ina226@40 { /* u79 */ + u79: ina226@40 { /* u79 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u79"; reg = <0x40>; shunt-resistor = <2000>; }; - ina226@41 { /* u81 */ + u81: ina226@41 { /* u81 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u81"; reg = <0x41>; shunt-resistor = <5000>; }; - ina226@42 { /* u80 */ + u80: ina226@42 { /* u80 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u80"; reg = <0x42>; shunt-resistor = <5000>; }; - ina226@43 { /* u84 */ + u84: ina226@43 { /* u84 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u84"; reg = <0x43>; shunt-resistor = <5000>; }; - ina226@44 { /* u16 */ + u16: ina226@44 { /* u16 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u16"; reg = <0x44>; shunt-resistor = <5000>; }; - ina226@45 { /* u65 */ + u65: ina226@45 { /* u65 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u65"; reg = <0x45>; shunt-resistor = <5000>; }; - ina226@46 { /* u74 */ + u74: ina226@46 { /* u74 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u74"; reg = <0x46>; shunt-resistor = <5000>; }; - ina226@47 { /* u75 */ + u75: ina226@47 { /* u75 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u75"; reg = <0x47>; shunt-resistor = <5000>; }; @@ -388,6 +497,7 @@ temperature-stability = <50>; factory-fout = <300000000>; clock-frequency = <300000000>; + clock-output-names = "si570_user"; }; }; i2c@3 { @@ -401,6 +511,7 @@ temperature-stability = <50>; /* copy from zc702 */ factory-fout = <156250000>; clock-frequency = <148500000>; + clock-output-names = "si570_mgt"; }; }; i2c@4 { @@ -514,6 +625,7 @@ /* ULPI SMSC USB3320 */ &usb0 { status = "okay"; + dr_mode = "host"; }; &watchdog0 { diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts index 8bb0001a026f..2e92634c77f9 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZCU111 * - * (C) Copyright 2017 - 2018, Xilinx, Inc. + * (C) Copyright 2017 - 2019, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> */ @@ -10,7 +10,7 @@ /dts-v1/; #include "zynqmp.dtsi" -#include "zynqmp-clk.dtsi" +#include "zynqmp-clk-ccf.dtsi" #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/gpio.h> @@ -59,6 +59,63 @@ linux,default-trigger = "heartbeat"; }; }; + + ina226-u67 { + compatible = "iio-hwmon"; + io-channels = <&u67 0>, <&u67 1>, <&u67 2>, <&u67 3>; + }; + ina226-u59 { + compatible = "iio-hwmon"; + io-channels = <&u59 0>, <&u59 1>, <&u59 2>, <&u59 3>; + }; + ina226-u61 { + compatible = "iio-hwmon"; + io-channels = <&u61 0>, <&u61 1>, <&u61 2>, <&u61 3>; + }; + ina226-u60 { + compatible = "iio-hwmon"; + io-channels = <&u60 0>, <&u60 1>, <&u60 2>, <&u60 3>; + }; + ina226-u64 { + compatible = "iio-hwmon"; + io-channels = <&u64 0>, <&u64 1>, <&u64 2>, <&u64 3>; + }; + ina226-u69 { + compatible = "iio-hwmon"; + io-channels = <&u69 0>, <&u69 1>, <&u69 2>, <&u69 3>; + }; + ina226-u66 { + compatible = "iio-hwmon"; + io-channels = <&u66 0>, <&u66 1>, <&u66 2>, <&u66 3>; + }; + ina226-u65 { + compatible = "iio-hwmon"; + io-channels = <&u65 0>, <&u65 1>, <&u65 2>, <&u65 3>; + }; + ina226-u63 { + compatible = "iio-hwmon"; + io-channels = <&u63 0>, <&u63 1>, <&u63 2>, <&u63 3>; + }; + ina226-u3 { + compatible = "iio-hwmon"; + io-channels = <&u3 0>, <&u3 1>, <&u3 2>, <&u3 3>; + }; + ina226-u71 { + compatible = "iio-hwmon"; + io-channels = <&u71 0>, <&u71 1>, <&u71 2>, <&u71 3>; + }; + ina226-u77 { + compatible = "iio-hwmon"; + io-channels = <&u77 0>, <&u77 1>, <&u77 2>, <&u77 3>; + }; + ina226-u73 { + compatible = "iio-hwmon"; + io-channels = <&u73 0>, <&u73 1>, <&u73 2>, <&u73 3>; + }; + ina226-u79 { + compatible = "iio-hwmon"; + io-channels = <&u79 0>, <&u79 1>, <&u79 2>, <&u79 3>; + }; }; &dcc { @@ -101,7 +158,7 @@ status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; - phy0: phy@c { + phy0: ethernet-phy@c { reg = <0xc>; ti,rx-internal-delay = <0x8>; ti,tx-internal-delay = <0xa>; @@ -152,73 +209,101 @@ reg = <0>; /* PS_PMBUS */ /* PMBUS_ALERT done via pca9544 */ - ina226@40 { /* u67 */ + u67: ina226@40 { /* u67 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u67"; reg = <0x40>; shunt-resistor = <2000>; }; - ina226@41 { /* u59 */ + u59: ina226@41 { /* u59 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u59"; reg = <0x41>; shunt-resistor = <5000>; }; - ina226@42 { /* u61 */ + u61: ina226@42 { /* u61 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u61"; reg = <0x42>; shunt-resistor = <5000>; }; - ina226@43 { /* u60 */ + u60: ina226@43 { /* u60 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u60"; reg = <0x43>; shunt-resistor = <5000>; }; - ina226@45 { /* u64 */ + u64: ina226@45 { /* u64 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u64"; reg = <0x45>; shunt-resistor = <5000>; }; - ina226@46 { /* u69 */ + u69: ina226@46 { /* u69 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u69"; reg = <0x46>; shunt-resistor = <2000>; }; - ina226@47 { /* u66 */ + u66: ina226@47 { /* u66 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u66"; reg = <0x47>; shunt-resistor = <5000>; }; - ina226@48 { /* u65 */ + u65: ina226@48 { /* u65 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u65"; reg = <0x48>; shunt-resistor = <5000>; }; - ina226@49 { /* u63 */ + u63: ina226@49 { /* u63 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u63"; reg = <0x49>; shunt-resistor = <5000>; }; - ina226@4a { /* u3 */ + u3: ina226@4a { /* u3 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u3"; reg = <0x4a>; shunt-resistor = <5000>; }; - ina226@4b { /* u71 */ + u71: ina226@4b { /* u71 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u71"; reg = <0x4b>; shunt-resistor = <5000>; }; - ina226@4c { /* u77 */ + u77: ina226@4c { /* u77 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u77"; reg = <0x4c>; shunt-resistor = <5000>; }; - ina226@4d { /* u73 */ + u73: ina226@4d { /* u73 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u73"; reg = <0x4d>; shunt-resistor = <5000>; }; - ina226@4e { /* u79 */ + u79: ina226@4e { /* u79 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u79"; reg = <0x4e>; shunt-resistor = <5000>; }; @@ -304,6 +389,7 @@ temperature-stability = <50>; factory-fout = <300000000>; clock-frequency = <300000000>; + clock-output-names = "si570_user"; }; }; i2c@3 { @@ -316,7 +402,8 @@ reg = <0x5d>; temperature-stability = <50>; factory-fout = <156250000>; - clock-frequency = <148500000>; + clock-frequency = <156250000>; + clock-output-names = "si570_mgt"; }; }; i2c@4 { @@ -440,4 +527,5 @@ /* ULPI SMSC USB3320 */ &usb0 { status = "okay"; + dr_mode = "host"; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi index 3c731e73903a..26d926eb1431 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP * - * (C) Copyright 2014 - 2015, Xilinx, Inc. + * (C) Copyright 2014 - 2019, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> * @@ -12,6 +12,8 @@ * the License, or (at your option) any later version. */ +#include <dt-bindings/power/xlnx-zynqmp-power.h> + / { compatible = "xlnx,zynqmp"; #address-cells = <2>; @@ -118,8 +120,31 @@ firmware { zynqmp_firmware: zynqmp-firmware { compatible = "xlnx,zynqmp-firmware"; + #power-domain-cells = <1>; method = "smc"; + zynqmp_power: zynqmp-power { + compatible = "xlnx,zynqmp-power"; + interrupt-parent = <&gic>; + interrupts = <0 35 4>; + }; + + zynqmp_clk: clock-controller { + u-boot,dm-pre-reloc; + #clock-cells = <1>; + compatible = "xlnx,zynqmp-clk"; + clocks = <&pss_ref_clk>, + <&video_clk>, + <&pss_alt_ref_clk>, + <&aux_ref_clk>, + <>_crx_ref_clk>; + clock-names = "pss_ref_clk", + "video_clk", + "pss_alt_ref_clk", + "aux_ref_clk", + "gt_crx_ref_clk"; + }; + nvmem_firmware { compatible = "xlnx,zynqmp-nvmem-fw"; #address-cells = <1>; @@ -187,6 +212,7 @@ interrupt-parent = <&gic>; tx-fifo-depth = <0x40>; rx-fifo-depth = <0x40>; + power-domains = <&zynqmp_firmware PD_CAN_0>; }; can1: can@ff070000 { @@ -198,6 +224,7 @@ interrupt-parent = <&gic>; tx-fifo-depth = <0x40>; rx-fifo-depth = <0x40>; + power-domains = <&zynqmp_firmware PD_CAN_1>; }; cci: cci@fd6e0000 { @@ -228,6 +255,7 @@ interrupts = <0 124 4>; clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <128>; + power-domains = <&zynqmp_firmware PD_GDMA>; }; fpd_dma_chan2: dma@fd510000 { @@ -238,6 +266,7 @@ interrupts = <0 125 4>; clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <128>; + power-domains = <&zynqmp_firmware PD_GDMA>; }; fpd_dma_chan3: dma@fd520000 { @@ -248,6 +277,7 @@ interrupts = <0 126 4>; clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <128>; + power-domains = <&zynqmp_firmware PD_GDMA>; }; fpd_dma_chan4: dma@fd530000 { @@ -258,6 +288,7 @@ interrupts = <0 127 4>; clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <128>; + power-domains = <&zynqmp_firmware PD_GDMA>; }; fpd_dma_chan5: dma@fd540000 { @@ -268,6 +299,7 @@ interrupts = <0 128 4>; clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <128>; + power-domains = <&zynqmp_firmware PD_GDMA>; }; fpd_dma_chan6: dma@fd550000 { @@ -278,6 +310,7 @@ interrupts = <0 129 4>; clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <128>; + power-domains = <&zynqmp_firmware PD_GDMA>; }; fpd_dma_chan7: dma@fd560000 { @@ -288,6 +321,7 @@ interrupts = <0 130 4>; clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <128>; + power-domains = <&zynqmp_firmware PD_GDMA>; }; fpd_dma_chan8: dma@fd570000 { @@ -298,6 +332,7 @@ interrupts = <0 131 4>; clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <128>; + power-domains = <&zynqmp_firmware PD_GDMA>; }; /* LPDDMA default allows only secured access. inorder to enable @@ -312,6 +347,7 @@ interrupts = <0 77 4>; clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <64>; + power-domains = <&zynqmp_firmware PD_ADMA>; }; lpd_dma_chan2: dma@ffa90000 { @@ -322,6 +358,7 @@ interrupts = <0 78 4>; clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <64>; + power-domains = <&zynqmp_firmware PD_ADMA>; }; lpd_dma_chan3: dma@ffaa0000 { @@ -332,6 +369,7 @@ interrupts = <0 79 4>; clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <64>; + power-domains = <&zynqmp_firmware PD_ADMA>; }; lpd_dma_chan4: dma@ffab0000 { @@ -342,6 +380,7 @@ interrupts = <0 80 4>; clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <64>; + power-domains = <&zynqmp_firmware PD_ADMA>; }; lpd_dma_chan5: dma@ffac0000 { @@ -352,6 +391,7 @@ interrupts = <0 81 4>; clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <64>; + power-domains = <&zynqmp_firmware PD_ADMA>; }; lpd_dma_chan6: dma@ffad0000 { @@ -362,6 +402,7 @@ interrupts = <0 82 4>; clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <64>; + power-domains = <&zynqmp_firmware PD_ADMA>; }; lpd_dma_chan7: dma@ffae0000 { @@ -372,6 +413,7 @@ interrupts = <0 83 4>; clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <64>; + power-domains = <&zynqmp_firmware PD_ADMA>; }; lpd_dma_chan8: dma@ffaf0000 { @@ -382,6 +424,7 @@ interrupts = <0 84 4>; clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <64>; + power-domains = <&zynqmp_firmware PD_ADMA>; }; mc: memory-controller@fd070000 { @@ -400,6 +443,7 @@ clock-names = "pclk", "hclk", "tx_clk"; #address-cells = <1>; #size-cells = <0>; + power-domains = <&zynqmp_firmware PD_ETH_0>; }; gem1: ethernet@ff0c0000 { @@ -411,6 +455,7 @@ clock-names = "pclk", "hclk", "tx_clk"; #address-cells = <1>; #size-cells = <0>; + power-domains = <&zynqmp_firmware PD_ETH_1>; }; gem2: ethernet@ff0d0000 { @@ -422,6 +467,7 @@ clock-names = "pclk", "hclk", "tx_clk"; #address-cells = <1>; #size-cells = <0>; + power-domains = <&zynqmp_firmware PD_ETH_2>; }; gem3: ethernet@ff0e0000 { @@ -433,6 +479,7 @@ clock-names = "pclk", "hclk", "tx_clk"; #address-cells = <1>; #size-cells = <0>; + power-domains = <&zynqmp_firmware PD_ETH_3>; }; gpio: gpio@ff0a0000 { @@ -445,6 +492,7 @@ interrupt-controller; #interrupt-cells = <2>; reg = <0x0 0xff0a0000 0x0 0x1000>; + power-domains = <&zynqmp_firmware PD_GPIO>; }; i2c0: i2c@ff020000 { @@ -455,6 +503,7 @@ reg = <0x0 0xff020000 0x0 0x1000>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&zynqmp_firmware PD_I2C_0>; }; i2c1: i2c@ff030000 { @@ -465,6 +514,7 @@ reg = <0x0 0xff030000 0x0 0x1000>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&zynqmp_firmware PD_I2C_1>; }; pcie: pcie@fd0e0000 { @@ -496,6 +546,7 @@ <0x0 0x0 0x0 0x2 &pcie_intc 0x2>, <0x0 0x0 0x0 0x3 &pcie_intc 0x3>, <0x0 0x0 0x0 0x4 &pcie_intc 0x4>; + power-domains = <&zynqmp_firmware PD_PCIE>; pcie_intc: legacy-interrupt-controller { interrupt-controller; #address-cells = <0>; @@ -519,24 +570,31 @@ reg = <0x0 0xfd0c0000 0x0 0x2000>; interrupt-parent = <&gic>; interrupts = <0 133 4>; + power-domains = <&zynqmp_firmware PD_SATA>; }; sdhci0: mmc@ff160000 { - compatible = "arasan,sdhci-8.9a"; + compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a"; status = "disabled"; interrupt-parent = <&gic>; interrupts = <0 48 4>; reg = <0x0 0xff160000 0x0 0x1000>; clock-names = "clk_xin", "clk_ahb"; + #clock-cells = <1>; + clock-output-names = "clk_out_sd0", "clk_in_sd0"; + power-domains = <&zynqmp_firmware PD_SD_0>; }; sdhci1: mmc@ff170000 { - compatible = "arasan,sdhci-8.9a"; + compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a"; status = "disabled"; interrupt-parent = <&gic>; interrupts = <0 49 4>; reg = <0x0 0xff170000 0x0 0x1000>; clock-names = "clk_xin", "clk_ahb"; + #clock-cells = <1>; + clock-output-names = "clk_out_sd1", "clk_in_sd1"; + power-domains = <&zynqmp_firmware PD_SD_1>; }; smmu: smmu@fd800000 { @@ -561,6 +619,7 @@ clock-names = "ref_clk", "pclk"; #address-cells = <1>; #size-cells = <0>; + power-domains = <&zynqmp_firmware PD_SPI_0>; }; spi1: spi@ff050000 { @@ -572,6 +631,7 @@ clock-names = "ref_clk", "pclk"; #address-cells = <1>; #size-cells = <0>; + power-domains = <&zynqmp_firmware PD_SPI_1>; }; ttc0: timer@ff110000 { @@ -581,6 +641,7 @@ interrupts = <0 36 4>, <0 37 4>, <0 38 4>; reg = <0x0 0xff110000 0x0 0x1000>; timer-width = <32>; + power-domains = <&zynqmp_firmware PD_TTC_0>; }; ttc1: timer@ff120000 { @@ -590,6 +651,7 @@ interrupts = <0 39 4>, <0 40 4>, <0 41 4>; reg = <0x0 0xff120000 0x0 0x1000>; timer-width = <32>; + power-domains = <&zynqmp_firmware PD_TTC_1>; }; ttc2: timer@ff130000 { @@ -599,6 +661,7 @@ interrupts = <0 42 4>, <0 43 4>, <0 44 4>; reg = <0x0 0xff130000 0x0 0x1000>; timer-width = <32>; + power-domains = <&zynqmp_firmware PD_TTC_2>; }; ttc3: timer@ff140000 { @@ -608,6 +671,7 @@ interrupts = <0 45 4>, <0 46 4>, <0 47 4>; reg = <0x0 0xff140000 0x0 0x1000>; timer-width = <32>; + power-domains = <&zynqmp_firmware PD_TTC_3>; }; uart0: serial@ff000000 { @@ -617,6 +681,7 @@ interrupts = <0 21 4>; reg = <0x0 0xff000000 0x0 0x1000>; clock-names = "uart_clk", "pclk"; + power-domains = <&zynqmp_firmware PD_UART_0>; }; uart1: serial@ff010000 { @@ -626,6 +691,7 @@ interrupts = <0 22 4>; reg = <0x0 0xff010000 0x0 0x1000>; clock-names = "uart_clk", "pclk"; + power-domains = <&zynqmp_firmware PD_UART_1>; }; usb0: usb@fe200000 { @@ -635,6 +701,7 @@ interrupts = <0 65 4>; reg = <0x0 0xfe200000 0x0 0x40000>; clock-names = "clk_xin", "clk_ahb"; + power-domains = <&zynqmp_firmware PD_USB_0>; }; usb1: usb@fe300000 { @@ -644,6 +711,7 @@ interrupts = <0 70 4>; reg = <0x0 0xfe300000 0x0 0x40000>; clock-names = "clk_xin", "clk_ahb"; + power-domains = <&zynqmp_firmware PD_USB_1>; }; watchdog0: watchdog@fd4d0000 { diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 6a83ba2aea3e..0f212889c931 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -86,6 +86,8 @@ CONFIG_ACPI_CPPC_CPUFREQ=m CONFIG_ARM_ARMADA_37XX_CPUFREQ=y CONFIG_ARM_SCPI_CPUFREQ=y CONFIG_ARM_IMX_CPUFREQ_DT=m +CONFIG_ARM_QCOM_CPUFREQ_NVMEM=y +CONFIG_ARM_QCOM_CPUFREQ_HW=y CONFIG_ARM_RASPBERRYPI_CPUFREQ=m CONFIG_ARM_TEGRA186_CPUFREQ=y CONFIG_ARM_SCPI_PROTOCOL=y @@ -169,6 +171,7 @@ CONFIG_BT_HCIBTUSB=m CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART_LL=y CONFIG_BT_HCIUART_BCM=y +CONFIG_BT_HCIUART_QCA=y CONFIG_CFG80211=m CONFIG_MAC80211=m CONFIG_MAC80211_LEDS=y @@ -190,6 +193,7 @@ CONFIG_PCIE_ALTERA_MSI=y CONFIG_PCI_HOST_THUNDER_PEM=y CONFIG_PCI_HOST_THUNDER_ECAM=y CONFIG_PCIE_ROCKCHIP_HOST=m +CONFIG_PCIE_BRCMSTB=m CONFIG_PCI_LAYERSCAPE=y CONFIG_PCI_HISI=y CONFIG_PCIE_QCOM=y @@ -252,6 +256,7 @@ CONFIG_VIRTIO_NET=y CONFIG_AMD_XGBE=y CONFIG_NET_XGENE=y CONFIG_ATL1C=m +CONFIG_BCMGENET=m CONFIG_BNX2X=m CONFIG_MACB=y CONFIG_THUNDER_NIC_PF=y @@ -299,6 +304,7 @@ CONFIG_USB_NET_PLUSB=m CONFIG_USB_NET_MCS7830=m CONFIG_ATH10K=m CONFIG_ATH10K_PCI=m +CONFIG_ATH10K_SNOC=m CONFIG_BRCMFMAC=m CONFIG_MWIFIEX=m CONFIG_MWIFIEX_PCIE=m @@ -350,6 +356,7 @@ CONFIG_SERIAL_FSL_LPUART_CONSOLE=y CONFIG_SERIAL_FSL_LINFLEXUART=y CONFIG_SERIAL_FSL_LINFLEXUART_CONSOLE=y CONFIG_SERIAL_MVEBU_UART=y +CONFIG_SERIAL_OWL=y CONFIG_SERIAL_DEV_BUS=y CONFIG_VIRTIO_CONSOLE=y CONFIG_IPMI_HANDLER=m @@ -367,6 +374,7 @@ CONFIG_I2C_IMX=y CONFIG_I2C_IMX_LPI2C=y CONFIG_I2C_MESON=y CONFIG_I2C_MV64XXX=y +CONFIG_I2C_OWL=y CONFIG_I2C_PXA=y CONFIG_I2C_QCOM_GENI=m CONFIG_I2C_QUP=y @@ -387,13 +395,18 @@ CONFIG_SPI_MESON_SPIFC=m CONFIG_SPI_ORION=y CONFIG_SPI_PL022=y CONFIG_SPI_ROCKCHIP=y +CONFIG_SPI_QCOM_QSPI=m CONFIG_SPI_QUP=y +CONFIG_SPI_QCOM_GENI=m CONFIG_SPI_S3C64XX=y CONFIG_SPI_SUN6I=y CONFIG_SPI_SPIDEV=m CONFIG_SPMI=y CONFIG_PINCTRL_SINGLE=y CONFIG_PINCTRL_MAX77620=y +CONFIG_PINCTRL_OWL=y +CONFIG_PINCTRL_S700=y +CONFIG_PINCTRL_S900=y CONFIG_PINCTRL_IMX8MM=y CONFIG_PINCTRL_IMX8MN=y CONFIG_PINCTRL_IMX8MQ=y @@ -421,6 +434,7 @@ CONFIG_GPIO_PCA953X=y CONFIG_GPIO_PCA953X_IRQ=y CONFIG_GPIO_MAX77620=y CONFIG_POWER_AVS=y +CONFIG_QCOM_CPR=y CONFIG_ROCKCHIP_IODOMAIN=y CONFIG_POWER_RESET_MSM=y CONFIG_POWER_RESET_XGENE=y @@ -442,11 +456,13 @@ CONFIG_ROCKCHIP_THERMAL=m CONFIG_RCAR_THERMAL=y CONFIG_RCAR_GEN3_THERMAL=y CONFIG_ARMADA_THERMAL=y +CONFIG_BCM2711_THERMAL=m CONFIG_BCM2835_THERMAL=m CONFIG_BRCMSTB_THERMAL=m CONFIG_EXYNOS_THERMAL=y CONFIG_TEGRA_BPMP_THERMAL=m CONFIG_QCOM_TSENS=y +CONFIG_QCOM_SPMI_TEMP_ALARM=m CONFIG_UNIPHIER_THERMAL=y CONFIG_WATCHDOG=y CONFIG_ARM_SP805_WATCHDOG=y @@ -457,6 +473,7 @@ CONFIG_IMX2_WDT=y CONFIG_IMX_SC_WDT=m CONFIG_MESON_GXBB_WATCHDOG=m CONFIG_MESON_WATCHDOG=m +CONFIG_QCOM_WDT=m CONFIG_RENESAS_WDT=y CONFIG_UNIPHIER_WATCHDOG=y CONFIG_BCM2835_WDT=y @@ -536,6 +553,7 @@ CONFIG_DRM_MSM=m CONFIG_DRM_TEGRA=m CONFIG_DRM_PANEL_SIMPLE=m CONFIG_DRM_SII902X=m +CONFIG_DRM_TI_SN65DSI86=m CONFIG_DRM_I2C_ADV7511=m CONFIG_DRM_VC4=m CONFIG_DRM_ETNAVIV=m @@ -577,6 +595,7 @@ CONFIG_SND_SIMPLE_CARD=m CONFIG_SND_AUDIO_GRAPH_CARD=m CONFIG_I2C_HID=m CONFIG_USB=y +CONFIG_USB_CONN_GPIO=m CONFIG_USB_OTG=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_TEGRA=y @@ -602,7 +621,10 @@ CONFIG_USB_ULPI=y CONFIG_USB_GADGET=y CONFIG_USB_RENESAS_USBHS_UDC=m CONFIG_USB_RENESAS_USB3=m +CONFIG_USB_TEGRA_XUDC=m CONFIG_TYPEC=m +CONFIG_TYPEC_TCPM=m +CONFIG_TYPEC_FUSB302=m CONFIG_TYPEC_HD3SS3220=m CONFIG_MMC=y CONFIG_MMC_BLOCK_MINORS=32 @@ -629,6 +651,7 @@ CONFIG_MMC_DW_ROCKCHIP=y CONFIG_MMC_SUNXI=y CONFIG_MMC_BCM2835=y CONFIG_MMC_SDHCI_XENON=y +CONFIG_MMC_OWL=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y @@ -665,6 +688,7 @@ CONFIG_IMX_SDMA=y CONFIG_K3_DMA=y CONFIG_MV_XOR=y CONFIG_MV_XOR_V2=y +CONFIG_OWL_DMA=y CONFIG_PL330_DMA=y CONFIG_TEGRA20_APB_DMA=y CONFIG_QCOM_BAM_DMA=y @@ -691,6 +715,7 @@ CONFIG_COMMON_CLK_PWM=y CONFIG_CLK_RASPBERRYPI=m CONFIG_CLK_IMX8MM=y CONFIG_CLK_IMX8MN=y +CONFIG_CLK_IMX8MP=y CONFIG_CLK_IMX8MQ=y CONFIG_CLK_IMX8QXP=y CONFIG_TI_SCI_CLK=y @@ -707,6 +732,7 @@ CONFIG_MSM_GCC_8998=y CONFIG_QCS_GCC_404=y CONFIG_SDM_GCC_845=y CONFIG_SM_GCC_8150=y +CONFIG_QCOM_HFPLL=y CONFIG_HWSPINLOCK=y CONFIG_HWSPINLOCK_QCOM=y CONFIG_ARM_MHU=y @@ -726,15 +752,21 @@ CONFIG_QCOM_SYSMON=m CONFIG_RPMSG_QCOM_GLINK_RPM=y CONFIG_RPMSG_QCOM_GLINK_SMEM=m CONFIG_RPMSG_QCOM_SMD=y +CONFIG_OWL_PM_DOMAINS=y CONFIG_RASPBERRYPI_POWER=y CONFIG_IMX_SCU_SOC=y +CONFIG_QCOM_AOSS_QMP=y +CONFIG_QCOM_COMMAND_DB=y CONFIG_QCOM_GENI_SE=y CONFIG_QCOM_GLINK_SSR=m +CONFIG_QCOM_RMTFS_MEM=m CONFIG_QCOM_RPMH=y +CONFIG_QCOM_RPMHPD=y CONFIG_QCOM_SMEM=y CONFIG_QCOM_SMD_RPM=y CONFIG_QCOM_SMP2P=y CONFIG_QCOM_SMSM=y +CONFIG_QCOM_SOCINFO=m CONFIG_ARCH_R8A774A1=y CONFIG_ARCH_R8A774B1=y CONFIG_ARCH_R8A774C0=y @@ -746,6 +778,7 @@ CONFIG_ARCH_R8A77970=y CONFIG_ARCH_R8A77980=y CONFIG_ARCH_R8A77990=y CONFIG_ARCH_R8A77995=y +CONFIG_QCOM_PDC=y CONFIG_ROCKCHIP_PM_DOMAINS=y CONFIG_ARCH_TEGRA_132_SOC=y CONFIG_ARCH_TEGRA_210_SOC=y @@ -759,6 +792,7 @@ CONFIG_EXTCON_USBC_CROS_EC=y CONFIG_MEMORY=y CONFIG_IIO=y CONFIG_EXYNOS_ADC=y +CONFIG_QCOM_SPMI_ADC5=m CONFIG_ROCKCHIP_SARADC=m CONFIG_IIO_CROS_EC_SENSORS_CORE=m CONFIG_IIO_CROS_EC_SENSORS=m @@ -775,6 +809,8 @@ CONFIG_PWM_ROCKCHIP=y CONFIG_PWM_SAMSUNG=y CONFIG_PWM_SUN4I=m CONFIG_PWM_TEGRA=m +CONFIG_RESET_QCOM_AOSS=y +CONFIG_RESET_QCOM_PDC=m CONFIG_RESET_TI_SCI=y CONFIG_PHY_XGENE=y CONFIG_PHY_SUN4I_USB=y @@ -845,7 +881,10 @@ CONFIG_SECURITY=y CONFIG_CRYPTO_ECHAINIV=y CONFIG_CRYPTO_ANSI_CPRNG=y CONFIG_CRYPTO_DEV_SUN8I_CE=m +CONFIG_CRYPTO_DEV_FSL_CAAM=m CONFIG_CRYPTO_DEV_HISI_ZIP=m +CONFIG_CRYPTO_USER_API_RNG=m +CONFIG_CRYPTO_DEV_QCOM_RNG=m CONFIG_CMA_SIZE_MBYTES=32 CONFIG_PRINTK_TIME=y CONFIG_DEBUG_INFO=y diff --git a/arch/arm64/crypto/aes-ce-ccm-core.S b/arch/arm64/crypto/aes-ce-ccm-core.S index 9add9bbc48d8..99a028e298ed 100644 --- a/arch/arm64/crypto/aes-ce-ccm-core.S +++ b/arch/arm64/crypto/aes-ce-ccm-core.S @@ -15,7 +15,7 @@ * void ce_aes_ccm_auth_data(u8 mac[], u8 const in[], u32 abytes, * u32 *macp, u8 const rk[], u32 rounds); */ -ENTRY(ce_aes_ccm_auth_data) +SYM_FUNC_START(ce_aes_ccm_auth_data) ldr w8, [x3] /* leftover from prev round? */ ld1 {v0.16b}, [x0] /* load mac */ cbz w8, 1f @@ -81,13 +81,13 @@ ENTRY(ce_aes_ccm_auth_data) st1 {v0.16b}, [x0] 10: str w8, [x3] ret -ENDPROC(ce_aes_ccm_auth_data) +SYM_FUNC_END(ce_aes_ccm_auth_data) /* * void ce_aes_ccm_final(u8 mac[], u8 const ctr[], u8 const rk[], * u32 rounds); */ -ENTRY(ce_aes_ccm_final) +SYM_FUNC_START(ce_aes_ccm_final) ld1 {v3.4s}, [x2], #16 /* load first round key */ ld1 {v0.16b}, [x0] /* load mac */ cmp w3, #12 /* which key size? */ @@ -121,7 +121,7 @@ ENTRY(ce_aes_ccm_final) eor v0.16b, v0.16b, v1.16b /* en-/decrypt the mac */ st1 {v0.16b}, [x0] /* store result */ ret -ENDPROC(ce_aes_ccm_final) +SYM_FUNC_END(ce_aes_ccm_final) .macro aes_ccm_do_crypt,enc ldr x8, [x6, #8] /* load lower ctr */ @@ -212,10 +212,10 @@ CPU_LE( rev x8, x8 ) * u8 const rk[], u32 rounds, u8 mac[], * u8 ctr[]); */ -ENTRY(ce_aes_ccm_encrypt) +SYM_FUNC_START(ce_aes_ccm_encrypt) aes_ccm_do_crypt 1 -ENDPROC(ce_aes_ccm_encrypt) +SYM_FUNC_END(ce_aes_ccm_encrypt) -ENTRY(ce_aes_ccm_decrypt) +SYM_FUNC_START(ce_aes_ccm_decrypt) aes_ccm_do_crypt 0 -ENDPROC(ce_aes_ccm_decrypt) +SYM_FUNC_END(ce_aes_ccm_decrypt) diff --git a/arch/arm64/crypto/aes-ce-ccm-glue.c b/arch/arm64/crypto/aes-ce-ccm-glue.c index 541cf9165748..f6d19b0dc893 100644 --- a/arch/arm64/crypto/aes-ce-ccm-glue.c +++ b/arch/arm64/crypto/aes-ce-ccm-glue.c @@ -47,14 +47,8 @@ static int ccm_setkey(struct crypto_aead *tfm, const u8 *in_key, unsigned int key_len) { struct crypto_aes_ctx *ctx = crypto_aead_ctx(tfm); - int ret; - ret = ce_aes_expandkey(ctx, in_key, key_len); - if (!ret) - return 0; - - tfm->base.crt_flags |= CRYPTO_TFM_RES_BAD_KEY_LEN; - return -EINVAL; + return ce_aes_expandkey(ctx, in_key, key_len); } static int ccm_setauthsize(struct crypto_aead *tfm, unsigned int authsize) diff --git a/arch/arm64/crypto/aes-ce-core.S b/arch/arm64/crypto/aes-ce-core.S index 76a30fe4ba8b..e52e13eb8fdb 100644 --- a/arch/arm64/crypto/aes-ce-core.S +++ b/arch/arm64/crypto/aes-ce-core.S @@ -8,7 +8,7 @@ .arch armv8-a+crypto -ENTRY(__aes_ce_encrypt) +SYM_FUNC_START(__aes_ce_encrypt) sub w3, w3, #2 ld1 {v0.16b}, [x2] ld1 {v1.4s}, [x0], #16 @@ -34,9 +34,9 @@ ENTRY(__aes_ce_encrypt) eor v0.16b, v0.16b, v3.16b st1 {v0.16b}, [x1] ret -ENDPROC(__aes_ce_encrypt) +SYM_FUNC_END(__aes_ce_encrypt) -ENTRY(__aes_ce_decrypt) +SYM_FUNC_START(__aes_ce_decrypt) sub w3, w3, #2 ld1 {v0.16b}, [x2] ld1 {v1.4s}, [x0], #16 @@ -62,23 +62,23 @@ ENTRY(__aes_ce_decrypt) eor v0.16b, v0.16b, v3.16b st1 {v0.16b}, [x1] ret -ENDPROC(__aes_ce_decrypt) +SYM_FUNC_END(__aes_ce_decrypt) /* * __aes_ce_sub() - use the aese instruction to perform the AES sbox * substitution on each byte in 'input' */ -ENTRY(__aes_ce_sub) +SYM_FUNC_START(__aes_ce_sub) dup v1.4s, w0 movi v0.16b, #0 aese v0.16b, v1.16b umov w0, v0.s[0] ret -ENDPROC(__aes_ce_sub) +SYM_FUNC_END(__aes_ce_sub) -ENTRY(__aes_ce_invert) +SYM_FUNC_START(__aes_ce_invert) ld1 {v0.4s}, [x1] aesimc v1.16b, v0.16b st1 {v1.4s}, [x0] ret -ENDPROC(__aes_ce_invert) +SYM_FUNC_END(__aes_ce_invert) diff --git a/arch/arm64/crypto/aes-ce-glue.c b/arch/arm64/crypto/aes-ce-glue.c index 6d085dc56c51..56a5f6f0b0c1 100644 --- a/arch/arm64/crypto/aes-ce-glue.c +++ b/arch/arm64/crypto/aes-ce-glue.c @@ -143,14 +143,8 @@ int ce_aes_setkey(struct crypto_tfm *tfm, const u8 *in_key, unsigned int key_len) { struct crypto_aes_ctx *ctx = crypto_tfm_ctx(tfm); - int ret; - ret = ce_aes_expandkey(ctx, in_key, key_len); - if (!ret) - return 0; - - tfm->crt_flags |= CRYPTO_TFM_RES_BAD_KEY_LEN; - return -EINVAL; + return ce_aes_expandkey(ctx, in_key, key_len); } EXPORT_SYMBOL(ce_aes_setkey); diff --git a/arch/arm64/crypto/aes-ce.S b/arch/arm64/crypto/aes-ce.S index c132c49c89a8..45062553467f 100644 --- a/arch/arm64/crypto/aes-ce.S +++ b/arch/arm64/crypto/aes-ce.S @@ -9,8 +9,8 @@ #include <linux/linkage.h> #include <asm/assembler.h> -#define AES_ENTRY(func) ENTRY(ce_ ## func) -#define AES_ENDPROC(func) ENDPROC(ce_ ## func) +#define AES_ENTRY(func) SYM_FUNC_START(ce_ ## func) +#define AES_ENDPROC(func) SYM_FUNC_END(ce_ ## func) .arch armv8-a+crypto diff --git a/arch/arm64/crypto/aes-cipher-core.S b/arch/arm64/crypto/aes-cipher-core.S index 423d0aebc570..c9d6955f8404 100644 --- a/arch/arm64/crypto/aes-cipher-core.S +++ b/arch/arm64/crypto/aes-cipher-core.S @@ -122,11 +122,11 @@ CPU_BE( rev w7, w7 ) ret .endm -ENTRY(__aes_arm64_encrypt) +SYM_FUNC_START(__aes_arm64_encrypt) do_crypt fround, crypto_ft_tab, crypto_ft_tab + 1, 2 -ENDPROC(__aes_arm64_encrypt) +SYM_FUNC_END(__aes_arm64_encrypt) .align 5 -ENTRY(__aes_arm64_decrypt) +SYM_FUNC_START(__aes_arm64_decrypt) do_crypt iround, crypto_it_tab, crypto_aes_inv_sbox, 0 -ENDPROC(__aes_arm64_decrypt) +SYM_FUNC_END(__aes_arm64_decrypt) diff --git a/arch/arm64/crypto/aes-glue.c b/arch/arm64/crypto/aes-glue.c index aa57dc639f77..ed5409c6abf4 100644 --- a/arch/arm64/crypto/aes-glue.c +++ b/arch/arm64/crypto/aes-glue.c @@ -132,13 +132,8 @@ static int skcipher_aes_setkey(struct crypto_skcipher *tfm, const u8 *in_key, unsigned int key_len) { struct crypto_aes_ctx *ctx = crypto_skcipher_ctx(tfm); - int ret; - - ret = aes_expandkey(ctx, in_key, key_len); - if (ret) - crypto_skcipher_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN); - return ret; + return aes_expandkey(ctx, in_key, key_len); } static int __maybe_unused xts_set_key(struct crypto_skcipher *tfm, @@ -155,11 +150,7 @@ static int __maybe_unused xts_set_key(struct crypto_skcipher *tfm, if (!ret) ret = aes_expandkey(&ctx->key2, &in_key[key_len / 2], key_len / 2); - if (!ret) - return 0; - - crypto_skcipher_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN); - return -EINVAL; + return ret; } static int __maybe_unused essiv_cbc_set_key(struct crypto_skcipher *tfm, @@ -173,19 +164,12 @@ static int __maybe_unused essiv_cbc_set_key(struct crypto_skcipher *tfm, ret = aes_expandkey(&ctx->key1, in_key, key_len); if (ret) - goto out; + return ret; desc->tfm = ctx->hash; crypto_shash_digest(desc, in_key, key_len, digest); - ret = aes_expandkey(&ctx->key2, digest, sizeof(digest)); - if (ret) - goto out; - - return 0; -out: - crypto_skcipher_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN); - return -EINVAL; + return aes_expandkey(&ctx->key2, digest, sizeof(digest)); } static int __maybe_unused ecb_encrypt(struct skcipher_request *req) @@ -791,13 +775,8 @@ static int cbcmac_setkey(struct crypto_shash *tfm, const u8 *in_key, unsigned int key_len) { struct mac_tfm_ctx *ctx = crypto_shash_ctx(tfm); - int err; - err = aes_expandkey(&ctx->key, in_key, key_len); - if (err) - crypto_shash_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN); - - return err; + return aes_expandkey(&ctx->key, in_key, key_len); } static void cmac_gf128_mul_by_x(be128 *y, const be128 *x) diff --git a/arch/arm64/crypto/aes-modes.S b/arch/arm64/crypto/aes-modes.S index 131618389f1f..8a2faa42b57e 100644 --- a/arch/arm64/crypto/aes-modes.S +++ b/arch/arm64/crypto/aes-modes.S @@ -22,26 +22,26 @@ #define ST5(x...) x #endif -aes_encrypt_block4x: +SYM_FUNC_START_LOCAL(aes_encrypt_block4x) encrypt_block4x v0, v1, v2, v3, w3, x2, x8, w7 ret -ENDPROC(aes_encrypt_block4x) +SYM_FUNC_END(aes_encrypt_block4x) -aes_decrypt_block4x: +SYM_FUNC_START_LOCAL(aes_decrypt_block4x) decrypt_block4x v0, v1, v2, v3, w3, x2, x8, w7 ret -ENDPROC(aes_decrypt_block4x) +SYM_FUNC_END(aes_decrypt_block4x) #if MAX_STRIDE == 5 -aes_encrypt_block5x: +SYM_FUNC_START_LOCAL(aes_encrypt_block5x) encrypt_block5x v0, v1, v2, v3, v4, w3, x2, x8, w7 ret -ENDPROC(aes_encrypt_block5x) +SYM_FUNC_END(aes_encrypt_block5x) -aes_decrypt_block5x: +SYM_FUNC_START_LOCAL(aes_decrypt_block5x) decrypt_block5x v0, v1, v2, v3, v4, w3, x2, x8, w7 ret -ENDPROC(aes_decrypt_block5x) +SYM_FUNC_END(aes_decrypt_block5x) #endif /* diff --git a/arch/arm64/crypto/aes-neon.S b/arch/arm64/crypto/aes-neon.S index 22d9b110cf78..247d34ddaab0 100644 --- a/arch/arm64/crypto/aes-neon.S +++ b/arch/arm64/crypto/aes-neon.S @@ -8,8 +8,8 @@ #include <linux/linkage.h> #include <asm/assembler.h> -#define AES_ENTRY(func) ENTRY(neon_ ## func) -#define AES_ENDPROC(func) ENDPROC(neon_ ## func) +#define AES_ENTRY(func) SYM_FUNC_START(neon_ ## func) +#define AES_ENDPROC(func) SYM_FUNC_END(neon_ ## func) xtsmask .req v7 cbciv .req v7 diff --git a/arch/arm64/crypto/aes-neonbs-core.S b/arch/arm64/crypto/aes-neonbs-core.S index 65982039fa36..b357164379f6 100644 --- a/arch/arm64/crypto/aes-neonbs-core.S +++ b/arch/arm64/crypto/aes-neonbs-core.S @@ -380,7 +380,7 @@ ISRM0: .octa 0x0306090c00070a0d01040b0e0205080f /* * void aesbs_convert_key(u8 out[], u32 const rk[], int rounds) */ -ENTRY(aesbs_convert_key) +SYM_FUNC_START(aesbs_convert_key) ld1 {v7.4s}, [x1], #16 // load round 0 key ld1 {v17.4s}, [x1], #16 // load round 1 key @@ -425,10 +425,10 @@ ENTRY(aesbs_convert_key) eor v17.16b, v17.16b, v7.16b str q17, [x0] ret -ENDPROC(aesbs_convert_key) +SYM_FUNC_END(aesbs_convert_key) .align 4 -aesbs_encrypt8: +SYM_FUNC_START_LOCAL(aesbs_encrypt8) ldr q9, [bskey], #16 // round 0 key ldr q8, M0SR ldr q24, SR @@ -488,10 +488,10 @@ aesbs_encrypt8: eor v2.16b, v2.16b, v12.16b eor v5.16b, v5.16b, v12.16b ret -ENDPROC(aesbs_encrypt8) +SYM_FUNC_END(aesbs_encrypt8) .align 4 -aesbs_decrypt8: +SYM_FUNC_START_LOCAL(aesbs_decrypt8) lsl x9, rounds, #7 add bskey, bskey, x9 @@ -553,7 +553,7 @@ aesbs_decrypt8: eor v3.16b, v3.16b, v12.16b eor v5.16b, v5.16b, v12.16b ret -ENDPROC(aesbs_decrypt8) +SYM_FUNC_END(aesbs_decrypt8) /* * aesbs_ecb_encrypt(u8 out[], u8 const in[], u8 const rk[], int rounds, @@ -621,21 +621,21 @@ ENDPROC(aesbs_decrypt8) .endm .align 4 -ENTRY(aesbs_ecb_encrypt) +SYM_FUNC_START(aesbs_ecb_encrypt) __ecb_crypt aesbs_encrypt8, v0, v1, v4, v6, v3, v7, v2, v5 -ENDPROC(aesbs_ecb_encrypt) +SYM_FUNC_END(aesbs_ecb_encrypt) .align 4 -ENTRY(aesbs_ecb_decrypt) +SYM_FUNC_START(aesbs_ecb_decrypt) __ecb_crypt aesbs_decrypt8, v0, v1, v6, v4, v2, v7, v3, v5 -ENDPROC(aesbs_ecb_decrypt) +SYM_FUNC_END(aesbs_ecb_decrypt) /* * aesbs_cbc_decrypt(u8 out[], u8 const in[], u8 const rk[], int rounds, * int blocks, u8 iv[]) */ .align 4 -ENTRY(aesbs_cbc_decrypt) +SYM_FUNC_START(aesbs_cbc_decrypt) frame_push 6 mov x19, x0 @@ -720,7 +720,7 @@ ENTRY(aesbs_cbc_decrypt) 2: frame_pop ret -ENDPROC(aesbs_cbc_decrypt) +SYM_FUNC_END(aesbs_cbc_decrypt) .macro next_tweak, out, in, const, tmp sshr \tmp\().2d, \in\().2d, #63 @@ -736,7 +736,7 @@ ENDPROC(aesbs_cbc_decrypt) * aesbs_xts_decrypt(u8 out[], u8 const in[], u8 const rk[], int rounds, * int blocks, u8 iv[]) */ -__xts_crypt8: +SYM_FUNC_START_LOCAL(__xts_crypt8) mov x6, #1 lsl x6, x6, x23 subs w23, w23, #8 @@ -789,7 +789,7 @@ __xts_crypt8: 0: mov bskey, x21 mov rounds, x22 br x7 -ENDPROC(__xts_crypt8) +SYM_FUNC_END(__xts_crypt8) .macro __xts_crypt, do8, o0, o1, o2, o3, o4, o5, o6, o7 frame_push 6, 64 @@ -854,13 +854,13 @@ ENDPROC(__xts_crypt8) ret .endm -ENTRY(aesbs_xts_encrypt) +SYM_FUNC_START(aesbs_xts_encrypt) __xts_crypt aesbs_encrypt8, v0, v1, v4, v6, v3, v7, v2, v5 -ENDPROC(aesbs_xts_encrypt) +SYM_FUNC_END(aesbs_xts_encrypt) -ENTRY(aesbs_xts_decrypt) +SYM_FUNC_START(aesbs_xts_decrypt) __xts_crypt aesbs_decrypt8, v0, v1, v6, v4, v2, v7, v3, v5 -ENDPROC(aesbs_xts_decrypt) +SYM_FUNC_END(aesbs_xts_decrypt) .macro next_ctr, v mov \v\().d[1], x8 @@ -874,7 +874,7 @@ ENDPROC(aesbs_xts_decrypt) * aesbs_ctr_encrypt(u8 out[], u8 const in[], u8 const rk[], * int rounds, int blocks, u8 iv[], u8 final[]) */ -ENTRY(aesbs_ctr_encrypt) +SYM_FUNC_START(aesbs_ctr_encrypt) frame_push 8 mov x19, x0 @@ -1002,4 +1002,4 @@ CPU_LE( rev x8, x8 ) 7: cbz x25, 8b st1 {v5.16b}, [x25] b 8b -ENDPROC(aesbs_ctr_encrypt) +SYM_FUNC_END(aesbs_ctr_encrypt) diff --git a/arch/arm64/crypto/chacha-neon-core.S b/arch/arm64/crypto/chacha-neon-core.S index 706c4e10e9e2..e90386a7db8e 100644 --- a/arch/arm64/crypto/chacha-neon-core.S +++ b/arch/arm64/crypto/chacha-neon-core.S @@ -36,7 +36,7 @@ * * Clobbers: w3, x10, v4, v12 */ -chacha_permute: +SYM_FUNC_START_LOCAL(chacha_permute) adr_l x10, ROT8 ld1 {v12.4s}, [x10] @@ -104,9 +104,9 @@ chacha_permute: b.ne .Ldoubleround ret -ENDPROC(chacha_permute) +SYM_FUNC_END(chacha_permute) -ENTRY(chacha_block_xor_neon) +SYM_FUNC_START(chacha_block_xor_neon) // x0: Input state matrix, s // x1: 1 data block output, o // x2: 1 data block input, i @@ -143,9 +143,9 @@ ENTRY(chacha_block_xor_neon) ldp x29, x30, [sp], #16 ret -ENDPROC(chacha_block_xor_neon) +SYM_FUNC_END(chacha_block_xor_neon) -ENTRY(hchacha_block_neon) +SYM_FUNC_START(hchacha_block_neon) // x0: Input state matrix, s // x1: output (8 32-bit words) // w2: nrounds @@ -163,7 +163,7 @@ ENTRY(hchacha_block_neon) ldp x29, x30, [sp], #16 ret -ENDPROC(hchacha_block_neon) +SYM_FUNC_END(hchacha_block_neon) a0 .req w12 a1 .req w13 @@ -183,7 +183,7 @@ ENDPROC(hchacha_block_neon) a15 .req w28 .align 6 -ENTRY(chacha_4block_xor_neon) +SYM_FUNC_START(chacha_4block_xor_neon) frame_push 10 // x0: Input state matrix, s @@ -845,7 +845,7 @@ CPU_BE( rev a15, a15 ) eor v31.16b, v31.16b, v3.16b st1 {v28.16b-v31.16b}, [x1] b .Lout -ENDPROC(chacha_4block_xor_neon) +SYM_FUNC_END(chacha_4block_xor_neon) .section ".rodata", "a", %progbits .align L1_CACHE_SHIFT diff --git a/arch/arm64/crypto/crct10dif-ce-core.S b/arch/arm64/crypto/crct10dif-ce-core.S index e545b42e6a46..5a95c2628fbf 100644 --- a/arch/arm64/crypto/crct10dif-ce-core.S +++ b/arch/arm64/crypto/crct10dif-ce-core.S @@ -131,7 +131,7 @@ tbl bd4.16b, {\bd\().16b}, perm4.16b .endm -__pmull_p8_core: +SYM_FUNC_START_LOCAL(__pmull_p8_core) .L__pmull_p8_core: ext t4.8b, ad.8b, ad.8b, #1 // A1 ext t5.8b, ad.8b, ad.8b, #2 // A2 @@ -194,7 +194,7 @@ __pmull_p8_core: eor t4.16b, t4.16b, t5.16b eor t6.16b, t6.16b, t3.16b ret -ENDPROC(__pmull_p8_core) +SYM_FUNC_END(__pmull_p8_core) .macro __pmull_p8, rq, ad, bd, i .ifnc \bd, fold_consts @@ -488,9 +488,9 @@ CPU_LE( ext v7.16b, v7.16b, v7.16b, #8 ) // // Assumes len >= 16. // -ENTRY(crc_t10dif_pmull_p8) +SYM_FUNC_START(crc_t10dif_pmull_p8) crc_t10dif_pmull p8 -ENDPROC(crc_t10dif_pmull_p8) +SYM_FUNC_END(crc_t10dif_pmull_p8) .align 5 // @@ -498,9 +498,9 @@ ENDPROC(crc_t10dif_pmull_p8) // // Assumes len >= 16. // -ENTRY(crc_t10dif_pmull_p64) +SYM_FUNC_START(crc_t10dif_pmull_p64) crc_t10dif_pmull p64 -ENDPROC(crc_t10dif_pmull_p64) +SYM_FUNC_END(crc_t10dif_pmull_p64) .section ".rodata", "a" .align 4 diff --git a/arch/arm64/crypto/ghash-ce-core.S b/arch/arm64/crypto/ghash-ce-core.S index a791c4adf8e6..084c6a30b03a 100644 --- a/arch/arm64/crypto/ghash-ce-core.S +++ b/arch/arm64/crypto/ghash-ce-core.S @@ -350,13 +350,13 @@ CPU_LE( rev64 T1.16b, T1.16b ) * void pmull_ghash_update(int blocks, u64 dg[], const char *src, * struct ghash_key const *k, const char *head) */ -ENTRY(pmull_ghash_update_p64) +SYM_FUNC_START(pmull_ghash_update_p64) __pmull_ghash p64 -ENDPROC(pmull_ghash_update_p64) +SYM_FUNC_END(pmull_ghash_update_p64) -ENTRY(pmull_ghash_update_p8) +SYM_FUNC_START(pmull_ghash_update_p8) __pmull_ghash p8 -ENDPROC(pmull_ghash_update_p8) +SYM_FUNC_END(pmull_ghash_update_p8) KS0 .req v8 KS1 .req v9 diff --git a/arch/arm64/crypto/ghash-ce-glue.c b/arch/arm64/crypto/ghash-ce-glue.c index 522cf004ce65..22831d3b7f62 100644 --- a/arch/arm64/crypto/ghash-ce-glue.c +++ b/arch/arm64/crypto/ghash-ce-glue.c @@ -248,10 +248,8 @@ static int ghash_setkey(struct crypto_shash *tfm, { struct ghash_key *key = crypto_shash_ctx(tfm); - if (keylen != GHASH_BLOCK_SIZE) { - crypto_shash_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN); + if (keylen != GHASH_BLOCK_SIZE) return -EINVAL; - } return __ghash_setkey(key, inkey, keylen); } @@ -259,7 +257,7 @@ static int ghash_setkey(struct crypto_shash *tfm, static struct shash_alg ghash_alg[] = {{ .base.cra_name = "ghash", .base.cra_driver_name = "ghash-neon", - .base.cra_priority = 100, + .base.cra_priority = 150, .base.cra_blocksize = GHASH_BLOCK_SIZE, .base.cra_ctxsize = sizeof(struct ghash_key), .base.cra_module = THIS_MODULE, @@ -306,10 +304,8 @@ static int gcm_setkey(struct crypto_aead *tfm, const u8 *inkey, int ret; ret = aes_expandkey(&ctx->aes_key, inkey, keylen); - if (ret) { - tfm->base.crt_flags |= CRYPTO_TFM_RES_BAD_KEY_LEN; + if (ret) return -EINVAL; - } aes_encrypt(&ctx->aes_key, key, (u8[AES_BLOCK_SIZE]){}); diff --git a/arch/arm64/crypto/nh-neon-core.S b/arch/arm64/crypto/nh-neon-core.S index e05570c38de7..51c0a534ef87 100644 --- a/arch/arm64/crypto/nh-neon-core.S +++ b/arch/arm64/crypto/nh-neon-core.S @@ -62,7 +62,7 @@ * * It's guaranteed that message_len % 16 == 0. */ -ENTRY(nh_neon) +SYM_FUNC_START(nh_neon) ld1 {K0.4s,K1.4s}, [KEY], #32 movi PASS0_SUMS.2d, #0 @@ -100,4 +100,4 @@ ENTRY(nh_neon) addp T1.2d, PASS2_SUMS.2d, PASS3_SUMS.2d st1 {T0.16b,T1.16b}, [HASH] ret -ENDPROC(nh_neon) +SYM_FUNC_END(nh_neon) diff --git a/arch/arm64/crypto/poly1305-glue.c b/arch/arm64/crypto/poly1305-glue.c index 83a2338a8826..e97b092f56b8 100644 --- a/arch/arm64/crypto/poly1305-glue.c +++ b/arch/arm64/crypto/poly1305-glue.c @@ -21,7 +21,7 @@ asmlinkage void poly1305_init_arm64(void *state, const u8 *key); asmlinkage void poly1305_blocks(void *state, const u8 *src, u32 len, u32 hibit); asmlinkage void poly1305_blocks_neon(void *state, const u8 *src, u32 len, u32 hibit); -asmlinkage void poly1305_emit(void *state, __le32 *digest, const u32 *nonce); +asmlinkage void poly1305_emit(void *state, u8 *digest, const u32 *nonce); static __ro_after_init DEFINE_STATIC_KEY_FALSE(have_neon); @@ -162,9 +162,6 @@ EXPORT_SYMBOL(poly1305_update_arch); void poly1305_final_arch(struct poly1305_desc_ctx *dctx, u8 *dst) { - __le32 digest[4]; - u64 f = 0; - if (unlikely(dctx->buflen)) { dctx->buf[dctx->buflen++] = 1; memset(dctx->buf + dctx->buflen, 0, @@ -172,18 +169,7 @@ void poly1305_final_arch(struct poly1305_desc_ctx *dctx, u8 *dst) poly1305_blocks(&dctx->h, dctx->buf, POLY1305_BLOCK_SIZE, 0); } - poly1305_emit(&dctx->h, digest, dctx->s); - - /* mac = (h + s) % (2^128) */ - f = (f >> 32) + le32_to_cpu(digest[0]); - put_unaligned_le32(f, dst); - f = (f >> 32) + le32_to_cpu(digest[1]); - put_unaligned_le32(f, dst + 4); - f = (f >> 32) + le32_to_cpu(digest[2]); - put_unaligned_le32(f, dst + 8); - f = (f >> 32) + le32_to_cpu(digest[3]); - put_unaligned_le32(f, dst + 12); - + poly1305_emit(&dctx->h, dst, dctx->s); *dctx = (struct poly1305_desc_ctx){}; } EXPORT_SYMBOL(poly1305_final_arch); diff --git a/arch/arm64/crypto/sha1-ce-core.S b/arch/arm64/crypto/sha1-ce-core.S index c2ce1f820706..92d0d2753e81 100644 --- a/arch/arm64/crypto/sha1-ce-core.S +++ b/arch/arm64/crypto/sha1-ce-core.S @@ -65,7 +65,7 @@ * void sha1_ce_transform(struct sha1_ce_state *sst, u8 const *src, * int blocks) */ -ENTRY(sha1_ce_transform) +SYM_FUNC_START(sha1_ce_transform) frame_push 3 mov x19, x0 @@ -160,4 +160,4 @@ CPU_LE( rev32 v11.16b, v11.16b ) str dgb, [x19, #16] frame_pop ret -ENDPROC(sha1_ce_transform) +SYM_FUNC_END(sha1_ce_transform) diff --git a/arch/arm64/crypto/sha1-ce-glue.c b/arch/arm64/crypto/sha1-ce-glue.c index bdc1b6d7aff7..63c875d3314b 100644 --- a/arch/arm64/crypto/sha1-ce-glue.c +++ b/arch/arm64/crypto/sha1-ce-glue.c @@ -28,6 +28,13 @@ struct sha1_ce_state { asmlinkage void sha1_ce_transform(struct sha1_ce_state *sst, u8 const *src, int blocks); +static void __sha1_ce_transform(struct sha1_state *sst, u8 const *src, + int blocks) +{ + sha1_ce_transform(container_of(sst, struct sha1_ce_state, sst), src, + blocks); +} + const u32 sha1_ce_offsetof_count = offsetof(struct sha1_ce_state, sst.count); const u32 sha1_ce_offsetof_finalize = offsetof(struct sha1_ce_state, finalize); @@ -41,8 +48,7 @@ static int sha1_ce_update(struct shash_desc *desc, const u8 *data, sctx->finalize = 0; kernel_neon_begin(); - sha1_base_do_update(desc, data, len, - (sha1_block_fn *)sha1_ce_transform); + sha1_base_do_update(desc, data, len, __sha1_ce_transform); kernel_neon_end(); return 0; @@ -64,10 +70,9 @@ static int sha1_ce_finup(struct shash_desc *desc, const u8 *data, sctx->finalize = finalize; kernel_neon_begin(); - sha1_base_do_update(desc, data, len, - (sha1_block_fn *)sha1_ce_transform); + sha1_base_do_update(desc, data, len, __sha1_ce_transform); if (!finalize) - sha1_base_do_finalize(desc, (sha1_block_fn *)sha1_ce_transform); + sha1_base_do_finalize(desc, __sha1_ce_transform); kernel_neon_end(); return sha1_base_finish(desc, out); } @@ -81,7 +86,7 @@ static int sha1_ce_final(struct shash_desc *desc, u8 *out) sctx->finalize = 0; kernel_neon_begin(); - sha1_base_do_finalize(desc, (sha1_block_fn *)sha1_ce_transform); + sha1_base_do_finalize(desc, __sha1_ce_transform); kernel_neon_end(); return sha1_base_finish(desc, out); } diff --git a/arch/arm64/crypto/sha2-ce-core.S b/arch/arm64/crypto/sha2-ce-core.S index 6f728a419009..3f9d0f326987 100644 --- a/arch/arm64/crypto/sha2-ce-core.S +++ b/arch/arm64/crypto/sha2-ce-core.S @@ -75,7 +75,7 @@ * int blocks) */ .text -ENTRY(sha2_ce_transform) +SYM_FUNC_START(sha2_ce_transform) frame_push 3 mov x19, x0 @@ -166,4 +166,4 @@ CPU_LE( rev32 v19.16b, v19.16b ) 4: st1 {dgav.4s, dgbv.4s}, [x19] frame_pop ret -ENDPROC(sha2_ce_transform) +SYM_FUNC_END(sha2_ce_transform) diff --git a/arch/arm64/crypto/sha2-ce-glue.c b/arch/arm64/crypto/sha2-ce-glue.c index 604a01a4ede6..a8e67bafba3d 100644 --- a/arch/arm64/crypto/sha2-ce-glue.c +++ b/arch/arm64/crypto/sha2-ce-glue.c @@ -28,6 +28,13 @@ struct sha256_ce_state { asmlinkage void sha2_ce_transform(struct sha256_ce_state *sst, u8 const *src, int blocks); +static void __sha2_ce_transform(struct sha256_state *sst, u8 const *src, + int blocks) +{ + sha2_ce_transform(container_of(sst, struct sha256_ce_state, sst), src, + blocks); +} + const u32 sha256_ce_offsetof_count = offsetof(struct sha256_ce_state, sst.count); const u32 sha256_ce_offsetof_finalize = offsetof(struct sha256_ce_state, @@ -35,6 +42,12 @@ const u32 sha256_ce_offsetof_finalize = offsetof(struct sha256_ce_state, asmlinkage void sha256_block_data_order(u32 *digest, u8 const *src, int blocks); +static void __sha256_block_data_order(struct sha256_state *sst, u8 const *src, + int blocks) +{ + sha256_block_data_order(sst->state, src, blocks); +} + static int sha256_ce_update(struct shash_desc *desc, const u8 *data, unsigned int len) { @@ -42,12 +55,11 @@ static int sha256_ce_update(struct shash_desc *desc, const u8 *data, if (!crypto_simd_usable()) return sha256_base_do_update(desc, data, len, - (sha256_block_fn *)sha256_block_data_order); + __sha256_block_data_order); sctx->finalize = 0; kernel_neon_begin(); - sha256_base_do_update(desc, data, len, - (sha256_block_fn *)sha2_ce_transform); + sha256_base_do_update(desc, data, len, __sha2_ce_transform); kernel_neon_end(); return 0; @@ -62,9 +74,8 @@ static int sha256_ce_finup(struct shash_desc *desc, const u8 *data, if (!crypto_simd_usable()) { if (len) sha256_base_do_update(desc, data, len, - (sha256_block_fn *)sha256_block_data_order); - sha256_base_do_finalize(desc, - (sha256_block_fn *)sha256_block_data_order); + __sha256_block_data_order); + sha256_base_do_finalize(desc, __sha256_block_data_order); return sha256_base_finish(desc, out); } @@ -75,11 +86,9 @@ static int sha256_ce_finup(struct shash_desc *desc, const u8 *data, sctx->finalize = finalize; kernel_neon_begin(); - sha256_base_do_update(desc, data, len, - (sha256_block_fn *)sha2_ce_transform); + sha256_base_do_update(desc, data, len, __sha2_ce_transform); if (!finalize) - sha256_base_do_finalize(desc, - (sha256_block_fn *)sha2_ce_transform); + sha256_base_do_finalize(desc, __sha2_ce_transform); kernel_neon_end(); return sha256_base_finish(desc, out); } @@ -89,14 +98,13 @@ static int sha256_ce_final(struct shash_desc *desc, u8 *out) struct sha256_ce_state *sctx = shash_desc_ctx(desc); if (!crypto_simd_usable()) { - sha256_base_do_finalize(desc, - (sha256_block_fn *)sha256_block_data_order); + sha256_base_do_finalize(desc, __sha256_block_data_order); return sha256_base_finish(desc, out); } sctx->finalize = 0; kernel_neon_begin(); - sha256_base_do_finalize(desc, (sha256_block_fn *)sha2_ce_transform); + sha256_base_do_finalize(desc, __sha2_ce_transform); kernel_neon_end(); return sha256_base_finish(desc, out); } diff --git a/arch/arm64/crypto/sha256-glue.c b/arch/arm64/crypto/sha256-glue.c index e273faca924f..ddf4a0d85c1c 100644 --- a/arch/arm64/crypto/sha256-glue.c +++ b/arch/arm64/crypto/sha256-glue.c @@ -27,14 +27,26 @@ asmlinkage void sha256_block_data_order(u32 *digest, const void *data, unsigned int num_blks); EXPORT_SYMBOL(sha256_block_data_order); +static void __sha256_block_data_order(struct sha256_state *sst, u8 const *src, + int blocks) +{ + sha256_block_data_order(sst->state, src, blocks); +} + asmlinkage void sha256_block_neon(u32 *digest, const void *data, unsigned int num_blks); +static void __sha256_block_neon(struct sha256_state *sst, u8 const *src, + int blocks) +{ + sha256_block_neon(sst->state, src, blocks); +} + static int crypto_sha256_arm64_update(struct shash_desc *desc, const u8 *data, unsigned int len) { return sha256_base_do_update(desc, data, len, - (sha256_block_fn *)sha256_block_data_order); + __sha256_block_data_order); } static int crypto_sha256_arm64_finup(struct shash_desc *desc, const u8 *data, @@ -42,9 +54,8 @@ static int crypto_sha256_arm64_finup(struct shash_desc *desc, const u8 *data, { if (len) sha256_base_do_update(desc, data, len, - (sha256_block_fn *)sha256_block_data_order); - sha256_base_do_finalize(desc, - (sha256_block_fn *)sha256_block_data_order); + __sha256_block_data_order); + sha256_base_do_finalize(desc, __sha256_block_data_order); return sha256_base_finish(desc, out); } @@ -87,7 +98,7 @@ static int sha256_update_neon(struct shash_desc *desc, const u8 *data, if (!crypto_simd_usable()) return sha256_base_do_update(desc, data, len, - (sha256_block_fn *)sha256_block_data_order); + __sha256_block_data_order); while (len > 0) { unsigned int chunk = len; @@ -97,14 +108,13 @@ static int sha256_update_neon(struct shash_desc *desc, const u8 *data, * input when running on a preemptible kernel, but process the * data block by block instead. */ - if (IS_ENABLED(CONFIG_PREEMPT) && + if (IS_ENABLED(CONFIG_PREEMPTION) && chunk + sctx->count % SHA256_BLOCK_SIZE > SHA256_BLOCK_SIZE) chunk = SHA256_BLOCK_SIZE - sctx->count % SHA256_BLOCK_SIZE; kernel_neon_begin(); - sha256_base_do_update(desc, data, chunk, - (sha256_block_fn *)sha256_block_neon); + sha256_base_do_update(desc, data, chunk, __sha256_block_neon); kernel_neon_end(); data += chunk; len -= chunk; @@ -118,15 +128,13 @@ static int sha256_finup_neon(struct shash_desc *desc, const u8 *data, if (!crypto_simd_usable()) { if (len) sha256_base_do_update(desc, data, len, - (sha256_block_fn *)sha256_block_data_order); - sha256_base_do_finalize(desc, - (sha256_block_fn *)sha256_block_data_order); + __sha256_block_data_order); + sha256_base_do_finalize(desc, __sha256_block_data_order); } else { if (len) sha256_update_neon(desc, data, len); kernel_neon_begin(); - sha256_base_do_finalize(desc, - (sha256_block_fn *)sha256_block_neon); + sha256_base_do_finalize(desc, __sha256_block_neon); kernel_neon_end(); } return sha256_base_finish(desc, out); diff --git a/arch/arm64/crypto/sha3-ce-core.S b/arch/arm64/crypto/sha3-ce-core.S index a7d587fa54f6..1cfb768df350 100644 --- a/arch/arm64/crypto/sha3-ce-core.S +++ b/arch/arm64/crypto/sha3-ce-core.S @@ -40,7 +40,7 @@ * sha3_ce_transform(u64 *st, const u8 *data, int blocks, int dg_size) */ .text -ENTRY(sha3_ce_transform) +SYM_FUNC_START(sha3_ce_transform) frame_push 4 mov x19, x0 @@ -218,7 +218,7 @@ ENTRY(sha3_ce_transform) st1 {v24.1d}, [x19] frame_pop ret -ENDPROC(sha3_ce_transform) +SYM_FUNC_END(sha3_ce_transform) .section ".rodata", "a" .align 8 diff --git a/arch/arm64/crypto/sha512-ce-core.S b/arch/arm64/crypto/sha512-ce-core.S index ce65e3abe4f2..cde606c0323e 100644 --- a/arch/arm64/crypto/sha512-ce-core.S +++ b/arch/arm64/crypto/sha512-ce-core.S @@ -106,7 +106,7 @@ * int blocks) */ .text -ENTRY(sha512_ce_transform) +SYM_FUNC_START(sha512_ce_transform) frame_push 3 mov x19, x0 @@ -216,4 +216,4 @@ CPU_LE( rev64 v19.16b, v19.16b ) 3: st1 {v8.2d-v11.2d}, [x19] frame_pop ret -ENDPROC(sha512_ce_transform) +SYM_FUNC_END(sha512_ce_transform) diff --git a/arch/arm64/crypto/sha512-ce-glue.c b/arch/arm64/crypto/sha512-ce-glue.c index 2369540040aa..dc890a719f54 100644 --- a/arch/arm64/crypto/sha512-ce-glue.c +++ b/arch/arm64/crypto/sha512-ce-glue.c @@ -29,16 +29,21 @@ asmlinkage void sha512_ce_transform(struct sha512_state *sst, u8 const *src, asmlinkage void sha512_block_data_order(u64 *digest, u8 const *src, int blocks); +static void __sha512_block_data_order(struct sha512_state *sst, u8 const *src, + int blocks) +{ + sha512_block_data_order(sst->state, src, blocks); +} + static int sha512_ce_update(struct shash_desc *desc, const u8 *data, unsigned int len) { if (!crypto_simd_usable()) return sha512_base_do_update(desc, data, len, - (sha512_block_fn *)sha512_block_data_order); + __sha512_block_data_order); kernel_neon_begin(); - sha512_base_do_update(desc, data, len, - (sha512_block_fn *)sha512_ce_transform); + sha512_base_do_update(desc, data, len, sha512_ce_transform); kernel_neon_end(); return 0; @@ -50,16 +55,14 @@ static int sha512_ce_finup(struct shash_desc *desc, const u8 *data, if (!crypto_simd_usable()) { if (len) sha512_base_do_update(desc, data, len, - (sha512_block_fn *)sha512_block_data_order); - sha512_base_do_finalize(desc, - (sha512_block_fn *)sha512_block_data_order); + __sha512_block_data_order); + sha512_base_do_finalize(desc, __sha512_block_data_order); return sha512_base_finish(desc, out); } kernel_neon_begin(); - sha512_base_do_update(desc, data, len, - (sha512_block_fn *)sha512_ce_transform); - sha512_base_do_finalize(desc, (sha512_block_fn *)sha512_ce_transform); + sha512_base_do_update(desc, data, len, sha512_ce_transform); + sha512_base_do_finalize(desc, sha512_ce_transform); kernel_neon_end(); return sha512_base_finish(desc, out); } @@ -67,13 +70,12 @@ static int sha512_ce_finup(struct shash_desc *desc, const u8 *data, static int sha512_ce_final(struct shash_desc *desc, u8 *out) { if (!crypto_simd_usable()) { - sha512_base_do_finalize(desc, - (sha512_block_fn *)sha512_block_data_order); + sha512_base_do_finalize(desc, __sha512_block_data_order); return sha512_base_finish(desc, out); } kernel_neon_begin(); - sha512_base_do_finalize(desc, (sha512_block_fn *)sha512_ce_transform); + sha512_base_do_finalize(desc, sha512_ce_transform); kernel_neon_end(); return sha512_base_finish(desc, out); } diff --git a/arch/arm64/crypto/sha512-glue.c b/arch/arm64/crypto/sha512-glue.c index d915c656e5fe..78d3083de6b7 100644 --- a/arch/arm64/crypto/sha512-glue.c +++ b/arch/arm64/crypto/sha512-glue.c @@ -20,15 +20,21 @@ MODULE_LICENSE("GPL v2"); MODULE_ALIAS_CRYPTO("sha384"); MODULE_ALIAS_CRYPTO("sha512"); -asmlinkage void sha512_block_data_order(u32 *digest, const void *data, +asmlinkage void sha512_block_data_order(u64 *digest, const void *data, unsigned int num_blks); EXPORT_SYMBOL(sha512_block_data_order); +static void __sha512_block_data_order(struct sha512_state *sst, u8 const *src, + int blocks) +{ + sha512_block_data_order(sst->state, src, blocks); +} + static int sha512_update(struct shash_desc *desc, const u8 *data, unsigned int len) { return sha512_base_do_update(desc, data, len, - (sha512_block_fn *)sha512_block_data_order); + __sha512_block_data_order); } static int sha512_finup(struct shash_desc *desc, const u8 *data, @@ -36,9 +42,8 @@ static int sha512_finup(struct shash_desc *desc, const u8 *data, { if (len) sha512_base_do_update(desc, data, len, - (sha512_block_fn *)sha512_block_data_order); - sha512_base_do_finalize(desc, - (sha512_block_fn *)sha512_block_data_order); + __sha512_block_data_order); + sha512_base_do_finalize(desc, __sha512_block_data_order); return sha512_base_finish(desc, out); } diff --git a/arch/arm64/crypto/sm3-ce-core.S b/arch/arm64/crypto/sm3-ce-core.S index d50d187906cb..ef97d3187cb7 100644 --- a/arch/arm64/crypto/sm3-ce-core.S +++ b/arch/arm64/crypto/sm3-ce-core.S @@ -73,7 +73,7 @@ * int blocks) */ .text -ENTRY(sm3_ce_transform) +SYM_FUNC_START(sm3_ce_transform) /* load state */ ld1 {v8.4s-v9.4s}, [x0] rev64 v8.4s, v8.4s @@ -131,7 +131,7 @@ CPU_LE( rev32 v3.16b, v3.16b ) ext v9.16b, v9.16b, v9.16b, #8 st1 {v8.4s-v9.4s}, [x0] ret -ENDPROC(sm3_ce_transform) +SYM_FUNC_END(sm3_ce_transform) .section ".rodata", "a" .align 3 diff --git a/arch/arm64/crypto/sm4-ce-core.S b/arch/arm64/crypto/sm4-ce-core.S index af3bfbc3f4d4..4ac6cfbc5797 100644 --- a/arch/arm64/crypto/sm4-ce-core.S +++ b/arch/arm64/crypto/sm4-ce-core.S @@ -15,7 +15,7 @@ * void sm4_ce_do_crypt(const u32 *rk, u32 *out, const u32 *in); */ .text -ENTRY(sm4_ce_do_crypt) +SYM_FUNC_START(sm4_ce_do_crypt) ld1 {v8.4s}, [x2] ld1 {v0.4s-v3.4s}, [x0], #64 CPU_LE( rev32 v8.16b, v8.16b ) @@ -33,4 +33,4 @@ CPU_LE( rev32 v8.16b, v8.16b ) CPU_LE( rev32 v8.16b, v8.16b ) st1 {v8.4s}, [x1] ret -ENDPROC(sm4_ce_do_crypt) +SYM_FUNC_END(sm4_ce_do_crypt) diff --git a/arch/arm64/include/asm/Kbuild b/arch/arm64/include/asm/Kbuild index bd23f87d6c55..d3077c991962 100644 --- a/arch/arm64/include/asm/Kbuild +++ b/arch/arm64/include/asm/Kbuild @@ -3,7 +3,6 @@ generic-y += bugs.h generic-y += delay.h generic-y += div64.h generic-y += dma.h -generic-y += dma-contiguous.h generic-y += dma-mapping.h generic-y += early_ioremap.h generic-y += emergency-restart.h diff --git a/arch/arm64/include/asm/alternative.h b/arch/arm64/include/asm/alternative.h index b9f8d787eea9..324e7d5ab37e 100644 --- a/arch/arm64/include/asm/alternative.h +++ b/arch/arm64/include/asm/alternative.h @@ -35,13 +35,16 @@ void apply_alternatives_module(void *start, size_t length); static inline void apply_alternatives_module(void *start, size_t length) { } #endif -#define ALTINSTR_ENTRY(feature,cb) \ +#define ALTINSTR_ENTRY(feature) \ " .word 661b - .\n" /* label */ \ - " .if " __stringify(cb) " == 0\n" \ " .word 663f - .\n" /* new instruction */ \ - " .else\n" \ + " .hword " __stringify(feature) "\n" /* feature bit */ \ + " .byte 662b-661b\n" /* source len */ \ + " .byte 664f-663f\n" /* replacement len */ + +#define ALTINSTR_ENTRY_CB(feature, cb) \ + " .word 661b - .\n" /* label */ \ " .word " __stringify(cb) "- .\n" /* callback */ \ - " .endif\n" \ " .hword " __stringify(feature) "\n" /* feature bit */ \ " .byte 662b-661b\n" /* source len */ \ " .byte 664f-663f\n" /* replacement len */ @@ -62,15 +65,14 @@ static inline void apply_alternatives_module(void *start, size_t length) { } * * Alternatives with callbacks do not generate replacement instructions. */ -#define __ALTERNATIVE_CFG(oldinstr, newinstr, feature, cfg_enabled, cb) \ +#define __ALTERNATIVE_CFG(oldinstr, newinstr, feature, cfg_enabled) \ ".if "__stringify(cfg_enabled)" == 1\n" \ "661:\n\t" \ oldinstr "\n" \ "662:\n" \ ".pushsection .altinstructions,\"a\"\n" \ - ALTINSTR_ENTRY(feature,cb) \ + ALTINSTR_ENTRY(feature) \ ".popsection\n" \ - " .if " __stringify(cb) " == 0\n" \ ".pushsection .altinstr_replacement, \"a\"\n" \ "663:\n\t" \ newinstr "\n" \ @@ -78,17 +80,25 @@ static inline void apply_alternatives_module(void *start, size_t length) { } ".popsection\n\t" \ ".org . - (664b-663b) + (662b-661b)\n\t" \ ".org . - (662b-661b) + (664b-663b)\n" \ - ".else\n\t" \ + ".endif\n" + +#define __ALTERNATIVE_CFG_CB(oldinstr, feature, cfg_enabled, cb) \ + ".if "__stringify(cfg_enabled)" == 1\n" \ + "661:\n\t" \ + oldinstr "\n" \ + "662:\n" \ + ".pushsection .altinstructions,\"a\"\n" \ + ALTINSTR_ENTRY_CB(feature, cb) \ + ".popsection\n" \ "663:\n\t" \ "664:\n\t" \ - ".endif\n" \ ".endif\n" #define _ALTERNATIVE_CFG(oldinstr, newinstr, feature, cfg, ...) \ - __ALTERNATIVE_CFG(oldinstr, newinstr, feature, IS_ENABLED(cfg), 0) + __ALTERNATIVE_CFG(oldinstr, newinstr, feature, IS_ENABLED(cfg)) #define ALTERNATIVE_CB(oldinstr, cb) \ - __ALTERNATIVE_CFG(oldinstr, "NOT_AN_INSTRUCTION", ARM64_CB_PATCH, 1, cb) + __ALTERNATIVE_CFG_CB(oldinstr, ARM64_CB_PATCH, 1, cb) #else #include <asm/assembler.h> diff --git a/arch/arm64/include/asm/arch_gicv3.h b/arch/arm64/include/asm/arch_gicv3.h index 89e4c8b79349..25fec4bde43a 100644 --- a/arch/arm64/include/asm/arch_gicv3.h +++ b/arch/arm64/include/asm/arch_gicv3.h @@ -140,10 +140,11 @@ static inline u32 gic_read_rpr(void) #define gicr_write_pendbaser(v, c) writeq_relaxed(v, c) #define gicr_read_pendbaser(c) readq_relaxed(c) -#define gits_write_vpropbaser(v, c) writeq_relaxed(v, c) +#define gicr_write_vpropbaser(v, c) writeq_relaxed(v, c) +#define gicr_read_vpropbaser(c) readq_relaxed(c) -#define gits_write_vpendbaser(v, c) writeq_relaxed(v, c) -#define gits_read_vpendbaser(c) readq_relaxed(c) +#define gicr_write_vpendbaser(v, c) writeq_relaxed(v, c) +#define gicr_read_vpendbaser(c) readq_relaxed(c) static inline bool gic_prio_masking_enabled(void) { diff --git a/arch/arm64/include/asm/archrandom.h b/arch/arm64/include/asm/archrandom.h new file mode 100644 index 000000000000..3fe02da70004 --- /dev/null +++ b/arch/arm64/include/asm/archrandom.h @@ -0,0 +1,75 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_ARCHRANDOM_H +#define _ASM_ARCHRANDOM_H + +#ifdef CONFIG_ARCH_RANDOM + +#include <linux/random.h> +#include <asm/cpufeature.h> + +static inline bool __arm64_rndr(unsigned long *v) +{ + bool ok; + + /* + * Reads of RNDR set PSTATE.NZCV to 0b0000 on success, + * and set PSTATE.NZCV to 0b0100 otherwise. + */ + asm volatile( + __mrs_s("%0", SYS_RNDR_EL0) "\n" + " cset %w1, ne\n" + : "=r" (*v), "=r" (ok) + : + : "cc"); + + return ok; +} + +static inline bool __must_check arch_get_random_long(unsigned long *v) +{ + return false; +} + +static inline bool __must_check arch_get_random_int(unsigned int *v) +{ + return false; +} + +static inline bool __must_check arch_get_random_seed_long(unsigned long *v) +{ + /* + * Only support the generic interface after we have detected + * the system wide capability, avoiding complexity with the + * cpufeature code and with potential scheduling between CPUs + * with and without the feature. + */ + if (!cpus_have_const_cap(ARM64_HAS_RNG)) + return false; + + return __arm64_rndr(v); +} + + +static inline bool __must_check arch_get_random_seed_int(unsigned int *v) +{ + unsigned long val; + bool ok = arch_get_random_seed_long(&val); + + *v = val; + return ok; +} + +static inline bool __init __early_cpu_has_rndr(void) +{ + /* Open code as we run prior to the first call to cpufeature. */ + unsigned long ftr = read_sysreg_s(SYS_ID_AA64ISAR0_EL1); + return (ftr >> ID_AA64ISAR0_RNDR_SHIFT) & 0xf; +} + +#else + +static inline bool __arm64_rndr(unsigned long *v) { return false; } +static inline bool __init __early_cpu_has_rndr(void) { return false; } + +#endif /* CONFIG_ARCH_RANDOM */ +#endif /* _ASM_ARCHRANDOM_H */ diff --git a/arch/arm64/include/asm/assembler.h b/arch/arm64/include/asm/assembler.h index b8cf7c85ffa2..aca337d79d12 100644 --- a/arch/arm64/include/asm/assembler.h +++ b/arch/arm64/include/asm/assembler.h @@ -40,12 +40,6 @@ msr daif, \flags .endm - /* Only on aarch64 pstate, PSR_D_BIT is different for aarch32 */ - .macro inherit_daif, pstate:req, tmp:req - and \tmp, \pstate, #(PSR_D_BIT | PSR_A_BIT | PSR_I_BIT | PSR_F_BIT) - msr daif, \tmp - .endm - /* IRQ is the lowest priority flag, unconditionally unmask the rest. */ .macro enable_da_f msr daifclr, #(8 | 4 | 1) @@ -86,13 +80,6 @@ .endm /* - * SMP data memory barrier - */ - .macro smp_dmb, opt - dmb \opt - .endm - -/* * RAS Error Synchronization barrier */ .macro esb @@ -462,17 +449,6 @@ USER(\label, ic ivau, \tmp2) // invalidate I line PoU .endm /* - * Annotate a function as position independent, i.e., safe to be called before - * the kernel virtual mapping is activated. - */ -#define ENDPIPROC(x) \ - .globl __pi_##x; \ - .type __pi_##x, %function; \ - .set __pi_##x, x; \ - .size __pi_##x, . - x; \ - ENDPROC(x) - -/* * Annotate a function as being unsuitable for kprobes. */ #ifdef CONFIG_KPROBES @@ -699,8 +675,8 @@ USER(\label, ic ivau, \tmp2) // invalidate I line PoU * where <label> is optional, and marks the point where execution will resume * after a yield has been performed. If omitted, execution resumes right after * the endif_yield_neon invocation. Note that the entire sequence, including - * the provided patchup code, will be omitted from the image if CONFIG_PREEMPT - * is not defined. + * the provided patchup code, will be omitted from the image if + * CONFIG_PREEMPTION is not defined. * * As a convenience, in the case where no patchup code is required, the above * sequence may be abbreviated to @@ -728,7 +704,7 @@ USER(\label, ic ivau, \tmp2) // invalidate I line PoU .endm .macro if_will_cond_yield_neon -#ifdef CONFIG_PREEMPT +#ifdef CONFIG_PREEMPTION get_current_task x0 ldr x0, [x0, #TSK_TI_PREEMPT] sub x0, x0, #PREEMPT_DISABLE_OFFSET diff --git a/arch/arm64/include/asm/atomic_ll_sc.h b/arch/arm64/include/asm/atomic_ll_sc.h index 7b012148bfd6..13869b76b58c 100644 --- a/arch/arm64/include/asm/atomic_ll_sc.h +++ b/arch/arm64/include/asm/atomic_ll_sc.h @@ -12,7 +12,7 @@ #include <linux/stringify.h> -#if IS_ENABLED(CONFIG_ARM64_LSE_ATOMICS) && IS_ENABLED(CONFIG_AS_LSE) +#ifdef CONFIG_ARM64_LSE_ATOMICS #define __LL_SC_FALLBACK(asm_ops) \ " b 3f\n" \ " .subsection 1\n" \ diff --git a/arch/arm64/include/asm/atomic_lse.h b/arch/arm64/include/asm/atomic_lse.h index 574808b9df4c..da3280f639cd 100644 --- a/arch/arm64/include/asm/atomic_lse.h +++ b/arch/arm64/include/asm/atomic_lse.h @@ -14,6 +14,7 @@ static inline void __lse_atomic_##op(int i, atomic_t *v) \ { \ asm volatile( \ + __LSE_PREAMBLE \ " " #asm_op " %w[i], %[v]\n" \ : [i] "+r" (i), [v] "+Q" (v->counter) \ : "r" (v)); \ @@ -30,6 +31,7 @@ ATOMIC_OP(add, stadd) static inline int __lse_atomic_fetch_##op##name(int i, atomic_t *v) \ { \ asm volatile( \ + __LSE_PREAMBLE \ " " #asm_op #mb " %w[i], %w[i], %[v]" \ : [i] "+r" (i), [v] "+Q" (v->counter) \ : "r" (v) \ @@ -58,6 +60,7 @@ static inline int __lse_atomic_add_return##name(int i, atomic_t *v) \ u32 tmp; \ \ asm volatile( \ + __LSE_PREAMBLE \ " ldadd" #mb " %w[i], %w[tmp], %[v]\n" \ " add %w[i], %w[i], %w[tmp]" \ : [i] "+r" (i), [v] "+Q" (v->counter), [tmp] "=&r" (tmp) \ @@ -77,6 +80,7 @@ ATOMIC_OP_ADD_RETURN( , al, "memory") static inline void __lse_atomic_and(int i, atomic_t *v) { asm volatile( + __LSE_PREAMBLE " mvn %w[i], %w[i]\n" " stclr %w[i], %[v]" : [i] "+&r" (i), [v] "+Q" (v->counter) @@ -87,6 +91,7 @@ static inline void __lse_atomic_and(int i, atomic_t *v) static inline int __lse_atomic_fetch_and##name(int i, atomic_t *v) \ { \ asm volatile( \ + __LSE_PREAMBLE \ " mvn %w[i], %w[i]\n" \ " ldclr" #mb " %w[i], %w[i], %[v]" \ : [i] "+&r" (i), [v] "+Q" (v->counter) \ @@ -106,6 +111,7 @@ ATOMIC_FETCH_OP_AND( , al, "memory") static inline void __lse_atomic_sub(int i, atomic_t *v) { asm volatile( + __LSE_PREAMBLE " neg %w[i], %w[i]\n" " stadd %w[i], %[v]" : [i] "+&r" (i), [v] "+Q" (v->counter) @@ -118,6 +124,7 @@ static inline int __lse_atomic_sub_return##name(int i, atomic_t *v) \ u32 tmp; \ \ asm volatile( \ + __LSE_PREAMBLE \ " neg %w[i], %w[i]\n" \ " ldadd" #mb " %w[i], %w[tmp], %[v]\n" \ " add %w[i], %w[i], %w[tmp]" \ @@ -139,6 +146,7 @@ ATOMIC_OP_SUB_RETURN( , al, "memory") static inline int __lse_atomic_fetch_sub##name(int i, atomic_t *v) \ { \ asm volatile( \ + __LSE_PREAMBLE \ " neg %w[i], %w[i]\n" \ " ldadd" #mb " %w[i], %w[i], %[v]" \ : [i] "+&r" (i), [v] "+Q" (v->counter) \ @@ -159,6 +167,7 @@ ATOMIC_FETCH_OP_SUB( , al, "memory") static inline void __lse_atomic64_##op(s64 i, atomic64_t *v) \ { \ asm volatile( \ + __LSE_PREAMBLE \ " " #asm_op " %[i], %[v]\n" \ : [i] "+r" (i), [v] "+Q" (v->counter) \ : "r" (v)); \ @@ -175,6 +184,7 @@ ATOMIC64_OP(add, stadd) static inline long __lse_atomic64_fetch_##op##name(s64 i, atomic64_t *v)\ { \ asm volatile( \ + __LSE_PREAMBLE \ " " #asm_op #mb " %[i], %[i], %[v]" \ : [i] "+r" (i), [v] "+Q" (v->counter) \ : "r" (v) \ @@ -203,6 +213,7 @@ static inline long __lse_atomic64_add_return##name(s64 i, atomic64_t *v)\ unsigned long tmp; \ \ asm volatile( \ + __LSE_PREAMBLE \ " ldadd" #mb " %[i], %x[tmp], %[v]\n" \ " add %[i], %[i], %x[tmp]" \ : [i] "+r" (i), [v] "+Q" (v->counter), [tmp] "=&r" (tmp) \ @@ -222,6 +233,7 @@ ATOMIC64_OP_ADD_RETURN( , al, "memory") static inline void __lse_atomic64_and(s64 i, atomic64_t *v) { asm volatile( + __LSE_PREAMBLE " mvn %[i], %[i]\n" " stclr %[i], %[v]" : [i] "+&r" (i), [v] "+Q" (v->counter) @@ -232,6 +244,7 @@ static inline void __lse_atomic64_and(s64 i, atomic64_t *v) static inline long __lse_atomic64_fetch_and##name(s64 i, atomic64_t *v) \ { \ asm volatile( \ + __LSE_PREAMBLE \ " mvn %[i], %[i]\n" \ " ldclr" #mb " %[i], %[i], %[v]" \ : [i] "+&r" (i), [v] "+Q" (v->counter) \ @@ -251,6 +264,7 @@ ATOMIC64_FETCH_OP_AND( , al, "memory") static inline void __lse_atomic64_sub(s64 i, atomic64_t *v) { asm volatile( + __LSE_PREAMBLE " neg %[i], %[i]\n" " stadd %[i], %[v]" : [i] "+&r" (i), [v] "+Q" (v->counter) @@ -263,6 +277,7 @@ static inline long __lse_atomic64_sub_return##name(s64 i, atomic64_t *v) \ unsigned long tmp; \ \ asm volatile( \ + __LSE_PREAMBLE \ " neg %[i], %[i]\n" \ " ldadd" #mb " %[i], %x[tmp], %[v]\n" \ " add %[i], %[i], %x[tmp]" \ @@ -284,6 +299,7 @@ ATOMIC64_OP_SUB_RETURN( , al, "memory") static inline long __lse_atomic64_fetch_sub##name(s64 i, atomic64_t *v) \ { \ asm volatile( \ + __LSE_PREAMBLE \ " neg %[i], %[i]\n" \ " ldadd" #mb " %[i], %[i], %[v]" \ : [i] "+&r" (i), [v] "+Q" (v->counter) \ @@ -305,6 +321,7 @@ static inline s64 __lse_atomic64_dec_if_positive(atomic64_t *v) unsigned long tmp; asm volatile( + __LSE_PREAMBLE "1: ldr %x[tmp], %[v]\n" " subs %[ret], %x[tmp], #1\n" " b.lt 2f\n" @@ -332,6 +349,7 @@ __lse__cmpxchg_case_##name##sz(volatile void *ptr, \ unsigned long tmp; \ \ asm volatile( \ + __LSE_PREAMBLE \ " mov %" #w "[tmp], %" #w "[old]\n" \ " cas" #mb #sfx "\t%" #w "[tmp], %" #w "[new], %[v]\n" \ " mov %" #w "[ret], %" #w "[tmp]" \ @@ -379,6 +397,7 @@ __lse__cmpxchg_double##name(unsigned long old1, \ register unsigned long x4 asm ("x4") = (unsigned long)ptr; \ \ asm volatile( \ + __LSE_PREAMBLE \ " casp" #mb "\t%[old1], %[old2], %[new1], %[new2], %[v]\n"\ " eor %[old1], %[old1], %[oldval1]\n" \ " eor %[old2], %[old2], %[oldval2]\n" \ diff --git a/arch/arm64/include/asm/checksum.h b/arch/arm64/include/asm/checksum.h index d064a50deb5f..8d2a7de39744 100644 --- a/arch/arm64/include/asm/checksum.h +++ b/arch/arm64/include/asm/checksum.h @@ -35,6 +35,9 @@ static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl) } #define ip_fast_csum ip_fast_csum +extern unsigned int do_csum(const unsigned char *buff, int len); +#define do_csum do_csum + #include <asm-generic/checksum.h> #endif /* __ASM_CHECKSUM_H */ diff --git a/arch/arm64/include/asm/compat.h b/arch/arm64/include/asm/compat.h index b0d53a265f1d..935d2aa231bf 100644 --- a/arch/arm64/include/asm/compat.h +++ b/arch/arm64/include/asm/compat.h @@ -4,6 +4,9 @@ */ #ifndef __ASM_COMPAT_H #define __ASM_COMPAT_H + +#include <asm-generic/compat.h> + #ifdef CONFIG_COMPAT /* @@ -13,8 +16,6 @@ #include <linux/sched.h> #include <linux/sched/task_stack.h> -#include <asm-generic/compat.h> - #define COMPAT_USER_HZ 100 #ifdef __AARCH64EB__ #define COMPAT_UTS_MACHINE "armv8b\0\0" @@ -113,23 +114,6 @@ typedef u32 compat_sigset_word; #define COMPAT_OFF_T_MAX 0x7fffffff -/* - * A pointer passed in from user mode. This should not - * be used for syscall parameters, just declare them - * as pointers because the syscall entry code will have - * appropriately converted them already. - */ - -static inline void __user *compat_ptr(compat_uptr_t uptr) -{ - return (void __user *)(unsigned long)uptr; -} - -static inline compat_uptr_t ptr_to_compat(void __user *uptr) -{ - return (u32)(unsigned long)uptr; -} - #define compat_user_stack_pointer() (user_stack_pointer(task_pt_regs(current))) #define COMPAT_MINSIGSTKSZ 2048 diff --git a/arch/arm64/include/asm/cpu.h b/arch/arm64/include/asm/cpu.h index d72d995b7e25..b4a40535a3d8 100644 --- a/arch/arm64/include/asm/cpu.h +++ b/arch/arm64/include/asm/cpu.h @@ -39,6 +39,7 @@ struct cpuinfo_arm64 { u32 reg_id_isar3; u32 reg_id_isar4; u32 reg_id_isar5; + u32 reg_id_isar6; u32 reg_id_mmfr0; u32 reg_id_mmfr1; u32 reg_id_mmfr2; diff --git a/arch/arm64/include/asm/cpucaps.h b/arch/arm64/include/asm/cpucaps.h index b92683871119..865e0253fc1e 100644 --- a/arch/arm64/include/asm/cpucaps.h +++ b/arch/arm64/include/asm/cpucaps.h @@ -44,7 +44,7 @@ #define ARM64_SSBS 34 #define ARM64_WORKAROUND_1418040 35 #define ARM64_HAS_SB 36 -#define ARM64_WORKAROUND_1165522 37 +#define ARM64_WORKAROUND_SPECULATIVE_AT_VHE 37 #define ARM64_HAS_ADDRESS_AUTH_ARCH 38 #define ARM64_HAS_ADDRESS_AUTH_IMP_DEF 39 #define ARM64_HAS_GENERIC_AUTH_ARCH 40 @@ -55,8 +55,10 @@ #define ARM64_WORKAROUND_CAVIUM_TX2_219_TVM 45 #define ARM64_WORKAROUND_CAVIUM_TX2_219_PRFM 46 #define ARM64_WORKAROUND_1542419 47 -#define ARM64_WORKAROUND_1319367 48 +#define ARM64_WORKAROUND_SPECULATIVE_AT_NVHE 48 +#define ARM64_HAS_E0PD 49 +#define ARM64_HAS_RNG 50 -#define ARM64_NCAPS 49 +#define ARM64_NCAPS 51 #endif /* __ASM_CPUCAPS_H */ diff --git a/arch/arm64/include/asm/cpufeature.h b/arch/arm64/include/asm/cpufeature.h index 4261d55e8506..92ef9539874a 100644 --- a/arch/arm64/include/asm/cpufeature.h +++ b/arch/arm64/include/asm/cpufeature.h @@ -613,6 +613,11 @@ static inline bool system_has_prio_mask_debugging(void) system_uses_irq_prio_masking(); } +static inline bool system_capabilities_finalized(void) +{ + return static_branch_likely(&arm64_const_caps_ready); +} + #define ARM64_BP_HARDEN_UNKNOWN -1 #define ARM64_BP_HARDEN_WA_NEEDED 0 #define ARM64_BP_HARDEN_NOT_REQUIRED 1 diff --git a/arch/arm64/include/asm/cputype.h b/arch/arm64/include/asm/cputype.h index aca07c2f6e6e..a87a93f67671 100644 --- a/arch/arm64/include/asm/cputype.h +++ b/arch/arm64/include/asm/cputype.h @@ -85,6 +85,8 @@ #define QCOM_CPU_PART_FALKOR_V1 0x800 #define QCOM_CPU_PART_FALKOR 0xC00 #define QCOM_CPU_PART_KRYO 0x200 +#define QCOM_CPU_PART_KRYO_3XX_SILVER 0x803 +#define QCOM_CPU_PART_KRYO_4XX_SILVER 0x805 #define NVIDIA_CPU_PART_DENVER 0x003 #define NVIDIA_CPU_PART_CARMEL 0x004 @@ -111,6 +113,8 @@ #define MIDR_QCOM_FALKOR_V1 MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_FALKOR_V1) #define MIDR_QCOM_FALKOR MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_FALKOR) #define MIDR_QCOM_KRYO MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_KRYO) +#define MIDR_QCOM_KRYO_3XX_SILVER MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_KRYO_3XX_SILVER) +#define MIDR_QCOM_KRYO_4XX_SILVER MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_KRYO_4XX_SILVER) #define MIDR_NVIDIA_DENVER MIDR_CPU_MODEL(ARM_CPU_IMP_NVIDIA, NVIDIA_CPU_PART_DENVER) #define MIDR_NVIDIA_CARMEL MIDR_CPU_MODEL(ARM_CPU_IMP_NVIDIA, NVIDIA_CPU_PART_CARMEL) #define MIDR_FUJITSU_A64FX MIDR_CPU_MODEL(ARM_CPU_IMP_FUJITSU, FUJITSU_CPU_PART_A64FX) diff --git a/arch/arm64/include/asm/daifflags.h b/arch/arm64/include/asm/daifflags.h index 72acd2db167f..ec213b4a1650 100644 --- a/arch/arm64/include/asm/daifflags.h +++ b/arch/arm64/include/asm/daifflags.h @@ -38,7 +38,7 @@ static inline void local_daif_mask(void) trace_hardirqs_off(); } -static inline unsigned long local_daif_save(void) +static inline unsigned long local_daif_save_flags(void) { unsigned long flags; @@ -50,6 +50,15 @@ static inline unsigned long local_daif_save(void) flags |= PSR_I_BIT; } + return flags; +} + +static inline unsigned long local_daif_save(void) +{ + unsigned long flags; + + flags = local_daif_save_flags(); + local_daif_mask(); return flags; diff --git a/arch/arm64/include/asm/efi.h b/arch/arm64/include/asm/efi.h index b54d3a86c444..44531a69d32b 100644 --- a/arch/arm64/include/asm/efi.h +++ b/arch/arm64/include/asm/efi.h @@ -93,21 +93,17 @@ static inline unsigned long efi_get_max_initrd_addr(unsigned long dram_base, return (image_addr & ~(SZ_1G - 1UL)) + (1UL << (VA_BITS_MIN - 1)); } -#define efi_call_early(f, ...) sys_table_arg->boottime->f(__VA_ARGS__) -#define __efi_call_early(f, ...) f(__VA_ARGS__) -#define efi_call_runtime(f, ...) sys_table_arg->runtime->f(__VA_ARGS__) -#define efi_is_64bit() (true) +#define efi_bs_call(func, ...) efi_system_table()->boottime->func(__VA_ARGS__) +#define efi_rt_call(func, ...) efi_system_table()->runtime->func(__VA_ARGS__) +#define efi_is_native() (true) -#define efi_table_attr(table, attr, instance) \ - ((table##_t *)instance)->attr +#define efi_table_attr(inst, attr) (inst->attr) -#define efi_call_proto(protocol, f, instance, ...) \ - ((protocol##_t *)instance)->f(instance, ##__VA_ARGS__) +#define efi_call_proto(inst, func, ...) inst->func(inst, ##__VA_ARGS__) #define alloc_screen_info(x...) &screen_info -static inline void free_screen_info(efi_system_table_t *sys_table_arg, - struct screen_info *si) +static inline void free_screen_info(struct screen_info *si) { } diff --git a/arch/arm64/include/asm/exception.h b/arch/arm64/include/asm/exception.h index 4d5f3b5f50cd..b87c6e276ab1 100644 --- a/arch/arm64/include/asm/exception.h +++ b/arch/arm64/include/asm/exception.h @@ -45,8 +45,8 @@ void do_sysinstr(unsigned int esr, struct pt_regs *regs); void do_sp_pc_abort(unsigned long addr, unsigned int esr, struct pt_regs *regs); void bad_el0_sync(struct pt_regs *regs, int reason, unsigned int esr); void do_cp15instr(unsigned int esr, struct pt_regs *regs); -void el0_svc_handler(struct pt_regs *regs); -void el0_svc_compat_handler(struct pt_regs *regs); +void do_el0_svc(struct pt_regs *regs); +void do_el0_svc_compat(struct pt_regs *regs); void do_el0_ia_bp_hardening(unsigned long addr, unsigned int esr, struct pt_regs *regs); diff --git a/arch/arm64/include/asm/hwcap.h b/arch/arm64/include/asm/hwcap.h index 3d2f2472a36c..0f00265248b5 100644 --- a/arch/arm64/include/asm/hwcap.h +++ b/arch/arm64/include/asm/hwcap.h @@ -86,6 +86,14 @@ #define KERNEL_HWCAP_SVESM4 __khwcap2_feature(SVESM4) #define KERNEL_HWCAP_FLAGM2 __khwcap2_feature(FLAGM2) #define KERNEL_HWCAP_FRINT __khwcap2_feature(FRINT) +#define KERNEL_HWCAP_SVEI8MM __khwcap2_feature(SVEI8MM) +#define KERNEL_HWCAP_SVEF32MM __khwcap2_feature(SVEF32MM) +#define KERNEL_HWCAP_SVEF64MM __khwcap2_feature(SVEF64MM) +#define KERNEL_HWCAP_SVEBF16 __khwcap2_feature(SVEBF16) +#define KERNEL_HWCAP_I8MM __khwcap2_feature(I8MM) +#define KERNEL_HWCAP_BF16 __khwcap2_feature(BF16) +#define KERNEL_HWCAP_DGH __khwcap2_feature(DGH) +#define KERNEL_HWCAP_RNG __khwcap2_feature(RNG) /* * This yields a mask that user programs can use to figure out what diff --git a/arch/arm64/include/asm/kexec.h b/arch/arm64/include/asm/kexec.h index 12a561a54128..d24b527e8c00 100644 --- a/arch/arm64/include/asm/kexec.h +++ b/arch/arm64/include/asm/kexec.h @@ -96,6 +96,10 @@ static inline void crash_post_resume(void) {} struct kimage_arch { void *dtb; unsigned long dtb_mem; + /* Core ELF header buffer */ + void *elf_headers; + unsigned long elf_headers_mem; + unsigned long elf_headers_sz; }; extern const struct kexec_file_ops kexec_image_ops; diff --git a/arch/arm64/include/asm/kvm_emulate.h b/arch/arm64/include/asm/kvm_emulate.h index 5efe5ca8fecf..688c63412cc2 100644 --- a/arch/arm64/include/asm/kvm_emulate.h +++ b/arch/arm64/include/asm/kvm_emulate.h @@ -17,7 +17,6 @@ #include <asm/esr.h> #include <asm/kvm_arm.h> #include <asm/kvm_hyp.h> -#include <asm/kvm_mmio.h> #include <asm/ptrace.h> #include <asm/cputype.h> #include <asm/virt.h> @@ -219,6 +218,38 @@ static inline void vcpu_write_spsr(struct kvm_vcpu *vcpu, unsigned long v) vcpu_gp_regs(vcpu)->spsr[KVM_SPSR_EL1] = v; } +/* + * The layout of SPSR for an AArch32 state is different when observed from an + * AArch64 SPSR_ELx or an AArch32 SPSR_*. This function generates the AArch32 + * view given an AArch64 view. + * + * In ARM DDI 0487E.a see: + * + * - The AArch64 view (SPSR_EL2) in section C5.2.18, page C5-426 + * - The AArch32 view (SPSR_abt) in section G8.2.126, page G8-6256 + * - The AArch32 view (SPSR_und) in section G8.2.132, page G8-6280 + * + * Which show the following differences: + * + * | Bit | AA64 | AA32 | Notes | + * +-----+------+------+-----------------------------| + * | 24 | DIT | J | J is RES0 in ARMv8 | + * | 21 | SS | DIT | SS doesn't exist in AArch32 | + * + * ... and all other bits are (currently) common. + */ +static inline unsigned long host_spsr_to_spsr32(unsigned long spsr) +{ + const unsigned long overlap = BIT(24) | BIT(21); + unsigned long dit = !!(spsr & PSR_AA32_DIT_BIT); + + spsr &= ~overlap; + + spsr |= dit << 21; + + return spsr; +} + static inline bool vcpu_mode_priv(const struct kvm_vcpu *vcpu) { u32 mode; @@ -283,6 +314,11 @@ static inline bool kvm_vcpu_dabt_issext(const struct kvm_vcpu *vcpu) return !!(kvm_vcpu_get_hsr(vcpu) & ESR_ELx_SSE); } +static inline bool kvm_vcpu_dabt_issf(const struct kvm_vcpu *vcpu) +{ + return !!(kvm_vcpu_get_hsr(vcpu) & ESR_ELx_SF); +} + static inline int kvm_vcpu_dabt_get_rd(const struct kvm_vcpu *vcpu) { return (kvm_vcpu_get_hsr(vcpu) & ESR_ELx_SRT_MASK) >> ESR_ELx_SRT_SHIFT; @@ -304,7 +340,7 @@ static inline bool kvm_vcpu_dabt_is_cm(const struct kvm_vcpu *vcpu) return !!(kvm_vcpu_get_hsr(vcpu) & ESR_ELx_CM); } -static inline int kvm_vcpu_dabt_get_as(const struct kvm_vcpu *vcpu) +static inline unsigned int kvm_vcpu_dabt_get_as(const struct kvm_vcpu *vcpu) { return 1 << ((kvm_vcpu_get_hsr(vcpu) & ESR_ELx_SAS) >> ESR_ELx_SAS_SHIFT); } diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h index c61260cf63c5..d87aa609d2b6 100644 --- a/arch/arm64/include/asm/kvm_host.h +++ b/arch/arm64/include/asm/kvm_host.h @@ -24,7 +24,6 @@ #include <asm/fpsimd.h> #include <asm/kvm.h> #include <asm/kvm_asm.h> -#include <asm/kvm_mmio.h> #include <asm/thread_info.h> #define __KVM_HAVE_ARCH_INTC_INITIALIZED @@ -53,7 +52,7 @@ int kvm_arm_init_sve(void); int __attribute_const__ kvm_target_cpu(void); int kvm_reset_vcpu(struct kvm_vcpu *vcpu); -void kvm_arch_vcpu_uninit(struct kvm_vcpu *vcpu); +void kvm_arm_vcpu_destroy(struct kvm_vcpu *vcpu); int kvm_arch_vm_ioctl_check_extension(struct kvm *kvm, long ext); void __extended_idmap_trampoline(phys_addr_t boot_pgd, phys_addr_t idmap_start); @@ -325,9 +324,6 @@ struct kvm_vcpu_arch { /* Don't run the guest (internal implementation need) */ bool pause; - /* IO related fields */ - struct kvm_decode mmio_decode; - /* Cache some mmu pages needed inside spinlock regions */ struct kvm_mmu_memory_cache mmu_page_cache; @@ -446,8 +442,6 @@ int kvm_set_spte_hva(struct kvm *kvm, unsigned long hva, pte_t pte); int kvm_age_hva(struct kvm *kvm, unsigned long start, unsigned long end); int kvm_test_age_hva(struct kvm *kvm, unsigned long hva); -struct kvm_vcpu *kvm_arm_get_running_vcpu(void); -struct kvm_vcpu * __percpu *kvm_get_running_vcpus(void); void kvm_arm_halt_guest(struct kvm *kvm); void kvm_arm_resume_guest(struct kvm *kvm); @@ -491,6 +485,14 @@ int handle_exit(struct kvm_vcpu *vcpu, struct kvm_run *run, void handle_exit_early(struct kvm_vcpu *vcpu, struct kvm_run *run, int exception_index); +/* MMIO helpers */ +void kvm_mmio_write_buf(void *buf, unsigned int len, unsigned long data); +unsigned long kvm_mmio_read_buf(const void *buf, unsigned int len); + +int kvm_handle_mmio_return(struct kvm_vcpu *vcpu, struct kvm_run *run); +int io_mem_abort(struct kvm_vcpu *vcpu, struct kvm_run *run, + phys_addr_t fault_ipa); + int kvm_perf_init(void); int kvm_perf_teardown(void); @@ -547,7 +549,7 @@ static inline void __cpu_init_hyp_mode(phys_addr_t pgd_ptr, * wrong, and hyp will crash and burn when it uses any * cpus_have_const_cap() wrapper. */ - BUG_ON(!static_branch_likely(&arm64_const_caps_ready)); + BUG_ON(!system_capabilities_finalized()); __kvm_call_hyp((void *)pgd_ptr, hyp_stack_ptr, vector_ptr, tpidr_el2); /* @@ -571,7 +573,7 @@ static inline bool kvm_arch_requires_vhe(void) return true; /* Some implementations have defects that confine them to VHE */ - if (cpus_have_cap(ARM64_WORKAROUND_1165522)) + if (cpus_have_cap(ARM64_WORKAROUND_SPECULATIVE_AT_VHE)) return true; return false; diff --git a/arch/arm64/include/asm/kvm_hyp.h b/arch/arm64/include/asm/kvm_hyp.h index 97f21cc66657..a3a6a2ba9a63 100644 --- a/arch/arm64/include/asm/kvm_hyp.h +++ b/arch/arm64/include/asm/kvm_hyp.h @@ -91,11 +91,11 @@ static __always_inline void __hyp_text __load_guest_stage2(struct kvm *kvm) write_sysreg(kvm_get_vttbr(kvm), vttbr_el2); /* - * ARM erratum 1165522 requires the actual execution of the above - * before we can switch to the EL1/EL0 translation regime used by + * ARM errata 1165522 and 1530923 require the actual execution of the + * above before we can switch to the EL1/EL0 translation regime used by * the guest. */ - asm(ALTERNATIVE("nop", "isb", ARM64_WORKAROUND_1165522)); + asm(ALTERNATIVE("nop", "isb", ARM64_WORKAROUND_SPECULATIVE_AT_VHE)); } #endif /* __ARM64_KVM_HYP_H__ */ diff --git a/arch/arm64/include/asm/kvm_mmio.h b/arch/arm64/include/asm/kvm_mmio.h deleted file mode 100644 index 02b5c48fd467..000000000000 --- a/arch/arm64/include/asm/kvm_mmio.h +++ /dev/null @@ -1,29 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) 2012 - Virtual Open Systems and Columbia University - * Author: Christoffer Dall <c.dall@virtualopensystems.com> - */ - -#ifndef __ARM64_KVM_MMIO_H__ -#define __ARM64_KVM_MMIO_H__ - -#include <linux/kvm_host.h> -#include <asm/kvm_arm.h> - -/* - * This is annoying. The mmio code requires this, even if we don't - * need any decoding. To be fixed. - */ -struct kvm_decode { - unsigned long rt; - bool sign_extend; -}; - -void kvm_mmio_write_buf(void *buf, unsigned int len, unsigned long data); -unsigned long kvm_mmio_read_buf(const void *buf, unsigned int len); - -int kvm_handle_mmio_return(struct kvm_vcpu *vcpu, struct kvm_run *run); -int io_mem_abort(struct kvm_vcpu *vcpu, struct kvm_run *run, - phys_addr_t fault_ipa); - -#endif /* __ARM64_KVM_MMIO_H__ */ diff --git a/arch/arm64/include/asm/linkage.h b/arch/arm64/include/asm/linkage.h index 1b266292f0be..ebee3113a62f 100644 --- a/arch/arm64/include/asm/linkage.h +++ b/arch/arm64/include/asm/linkage.h @@ -4,4 +4,20 @@ #define __ALIGN .align 2 #define __ALIGN_STR ".align 2" +/* + * Annotate a function as position independent, i.e., safe to be called before + * the kernel virtual mapping is activated. + */ +#define SYM_FUNC_START_PI(x) \ + SYM_FUNC_START_ALIAS(__pi_##x); \ + SYM_FUNC_START(x) + +#define SYM_FUNC_START_WEAK_PI(x) \ + SYM_FUNC_START_ALIAS(__pi_##x); \ + SYM_FUNC_START_WEAK(x) + +#define SYM_FUNC_END_PI(x) \ + SYM_FUNC_END(x); \ + SYM_FUNC_END_ALIAS(__pi_##x) + #endif diff --git a/arch/arm64/include/asm/lse.h b/arch/arm64/include/asm/lse.h index 80b388278149..d429f7701c36 100644 --- a/arch/arm64/include/asm/lse.h +++ b/arch/arm64/include/asm/lse.h @@ -4,7 +4,9 @@ #include <asm/atomic_ll_sc.h> -#if defined(CONFIG_AS_LSE) && defined(CONFIG_ARM64_LSE_ATOMICS) +#ifdef CONFIG_ARM64_LSE_ATOMICS + +#define __LSE_PREAMBLE ".arch armv8-a+lse\n" #include <linux/compiler_types.h> #include <linux/export.h> @@ -14,8 +16,6 @@ #include <asm/atomic_lse.h> #include <asm/cpucaps.h> -__asm__(".arch_extension lse"); - extern struct static_key_false cpu_hwcap_keys[ARM64_NCAPS]; extern struct static_key_false arm64_const_caps_ready; @@ -34,9 +34,9 @@ static inline bool system_uses_lse_atomics(void) /* In-line patching at runtime */ #define ARM64_LSE_ATOMIC_INSN(llsc, lse) \ - ALTERNATIVE(llsc, lse, ARM64_HAS_LSE_ATOMICS) + ALTERNATIVE(llsc, __LSE_PREAMBLE lse, ARM64_HAS_LSE_ATOMICS) -#else /* CONFIG_AS_LSE && CONFIG_ARM64_LSE_ATOMICS */ +#else /* CONFIG_ARM64_LSE_ATOMICS */ static inline bool system_uses_lse_atomics(void) { return false; } @@ -44,5 +44,5 @@ static inline bool system_uses_lse_atomics(void) { return false; } #define ARM64_LSE_ATOMIC_INSN(llsc, lse) llsc -#endif /* CONFIG_AS_LSE && CONFIG_ARM64_LSE_ATOMICS */ +#endif /* CONFIG_ARM64_LSE_ATOMICS */ #endif /* __ASM_LSE_H */ diff --git a/arch/arm64/include/asm/mmu.h b/arch/arm64/include/asm/mmu.h index f217e3292919..e4d862420bb4 100644 --- a/arch/arm64/include/asm/mmu.h +++ b/arch/arm64/include/asm/mmu.h @@ -29,52 +29,11 @@ typedef struct { */ #define ASID(mm) ((mm)->context.id.counter & 0xffff) -static inline bool arm64_kernel_unmapped_at_el0(void) -{ - return IS_ENABLED(CONFIG_UNMAP_KERNEL_AT_EL0) && - cpus_have_const_cap(ARM64_UNMAP_KERNEL_AT_EL0); -} +extern bool arm64_use_ng_mappings; -static inline bool arm64_kernel_use_ng_mappings(void) +static inline bool arm64_kernel_unmapped_at_el0(void) { - bool tx1_bug; - - /* What's a kpti? Use global mappings if we don't know. */ - if (!IS_ENABLED(CONFIG_UNMAP_KERNEL_AT_EL0)) - return false; - - /* - * Note: this function is called before the CPU capabilities have - * been configured, so our early mappings will be global. If we - * later determine that kpti is required, then - * kpti_install_ng_mappings() will make them non-global. - */ - if (arm64_kernel_unmapped_at_el0()) - return true; - - if (!IS_ENABLED(CONFIG_RANDOMIZE_BASE)) - return false; - - /* - * KASLR is enabled so we're going to be enabling kpti on non-broken - * CPUs regardless of their susceptibility to Meltdown. Rather - * than force everybody to go through the G -> nG dance later on, - * just put down non-global mappings from the beginning. - */ - if (!IS_ENABLED(CONFIG_CAVIUM_ERRATUM_27456)) { - tx1_bug = false; -#ifndef MODULE - } else if (!static_branch_likely(&arm64_const_caps_ready)) { - extern const struct midr_range cavium_erratum_27456_cpus[]; - - tx1_bug = is_midr_in_range_list(read_cpuid_id(), - cavium_erratum_27456_cpus); -#endif - } else { - tx1_bug = __cpus_have_const_cap(ARM64_WORKAROUND_CAVIUM_27456); - } - - return !tx1_bug && kaslr_offset() > 0; + return arm64_use_ng_mappings; } typedef void (*bp_hardening_cb_t)(void); @@ -128,6 +87,7 @@ extern void create_pgd_mapping(struct mm_struct *mm, phys_addr_t phys, pgprot_t prot, bool page_mappings_only); extern void *fixmap_remap_fdt(phys_addr_t dt_phys, int *size, pgprot_t prot); extern void mark_linear_text_alias_ro(void); +extern bool kaslr_requires_kpti(void); #define INIT_MM_CONTEXT(name) \ .pgd = init_pg_dir, diff --git a/arch/arm64/include/asm/pgtable-hwdef.h b/arch/arm64/include/asm/pgtable-hwdef.h index d9fbd433cc17..6bf5e650da78 100644 --- a/arch/arm64/include/asm/pgtable-hwdef.h +++ b/arch/arm64/include/asm/pgtable-hwdef.h @@ -110,6 +110,7 @@ #define PUD_TABLE_BIT (_AT(pudval_t, 1) << 1) #define PUD_TYPE_MASK (_AT(pudval_t, 3) << 0) #define PUD_TYPE_SECT (_AT(pudval_t, 1) << 0) +#define PUD_SECT_RDONLY (_AT(pudval_t, 1) << 7) /* AP[2] */ /* * Level 2 descriptor (PMD). @@ -292,6 +293,8 @@ #define TCR_HD (UL(1) << 40) #define TCR_NFD0 (UL(1) << 53) #define TCR_NFD1 (UL(1) << 54) +#define TCR_E0PD0 (UL(1) << 55) +#define TCR_E0PD1 (UL(1) << 56) /* * TTBR. diff --git a/arch/arm64/include/asm/pgtable-prot.h b/arch/arm64/include/asm/pgtable-prot.h index 8dc6c5cdabe6..6f87839f0249 100644 --- a/arch/arm64/include/asm/pgtable-prot.h +++ b/arch/arm64/include/asm/pgtable-prot.h @@ -26,8 +26,8 @@ #define _PROT_DEFAULT (PTE_TYPE_PAGE | PTE_AF | PTE_SHARED) #define _PROT_SECT_DEFAULT (PMD_TYPE_SECT | PMD_SECT_AF | PMD_SECT_S) -#define PTE_MAYBE_NG (arm64_kernel_use_ng_mappings() ? PTE_NG : 0) -#define PMD_MAYBE_NG (arm64_kernel_use_ng_mappings() ? PMD_SECT_NG : 0) +#define PTE_MAYBE_NG (arm64_kernel_unmapped_at_el0() ? PTE_NG : 0) +#define PMD_MAYBE_NG (arm64_kernel_unmapped_at_el0() ? PMD_SECT_NG : 0) #define PROT_DEFAULT (_PROT_DEFAULT | PTE_MAYBE_NG) #define PROT_SECT_DEFAULT (_PROT_SECT_DEFAULT | PMD_MAYBE_NG) @@ -85,13 +85,12 @@ #define PAGE_SHARED_EXEC __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_RDONLY | PTE_NG | PTE_PXN | PTE_WRITE) #define PAGE_READONLY __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_RDONLY | PTE_NG | PTE_PXN | PTE_UXN) #define PAGE_READONLY_EXEC __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_RDONLY | PTE_NG | PTE_PXN) -#define PAGE_EXECONLY __pgprot(_PAGE_DEFAULT | PTE_RDONLY | PTE_NG | PTE_PXN) #define __P000 PAGE_NONE #define __P001 PAGE_READONLY #define __P010 PAGE_READONLY #define __P011 PAGE_READONLY -#define __P100 PAGE_EXECONLY +#define __P100 PAGE_READONLY_EXEC #define __P101 PAGE_READONLY_EXEC #define __P110 PAGE_READONLY_EXEC #define __P111 PAGE_READONLY_EXEC @@ -100,7 +99,7 @@ #define __S001 PAGE_READONLY #define __S010 PAGE_SHARED #define __S011 PAGE_SHARED -#define __S100 PAGE_EXECONLY +#define __S100 PAGE_READONLY_EXEC #define __S101 PAGE_READONLY_EXEC #define __S110 PAGE_SHARED_EXEC #define __S111 PAGE_SHARED_EXEC diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h index 5d15b4735a0e..538c85e62f86 100644 --- a/arch/arm64/include/asm/pgtable.h +++ b/arch/arm64/include/asm/pgtable.h @@ -96,12 +96,8 @@ extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)]; #define pte_dirty(pte) (pte_sw_dirty(pte) || pte_hw_dirty(pte)) #define pte_valid(pte) (!!(pte_val(pte) & PTE_VALID)) -/* - * Execute-only user mappings do not have the PTE_USER bit set. All valid - * kernel mappings have the PTE_UXN bit set. - */ #define pte_valid_not_user(pte) \ - ((pte_val(pte) & (PTE_VALID | PTE_USER | PTE_UXN)) == (PTE_VALID | PTE_UXN)) + ((pte_val(pte) & (PTE_VALID | PTE_USER)) == PTE_VALID) #define pte_valid_young(pte) \ ((pte_val(pte) & (PTE_VALID | PTE_AF)) == (PTE_VALID | PTE_AF)) #define pte_valid_user(pte) \ @@ -117,8 +113,8 @@ extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)]; /* * p??_access_permitted() is true for valid user mappings (subject to the - * write permission check) other than user execute-only which do not have the - * PTE_USER bit set. PROT_NONE mappings do not have the PTE_VALID bit set. + * write permission check). PROT_NONE mappings do not have the PTE_VALID bit + * set. */ #define pte_access_permitted(pte, write) \ (pte_valid_user(pte) && (!(write) || pte_write(pte))) @@ -445,6 +441,7 @@ extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn, PMD_TYPE_TABLE) #define pmd_sect(pmd) ((pmd_val(pmd) & PMD_TYPE_MASK) == \ PMD_TYPE_SECT) +#define pmd_leaf(pmd) pmd_sect(pmd) #if defined(CONFIG_ARM64_64K_PAGES) || CONFIG_PGTABLE_LEVELS < 3 static inline bool pud_sect(pud_t pud) { return false; } @@ -529,6 +526,7 @@ static inline void pte_unmap(pte_t *pte) { } #define pud_none(pud) (!pud_val(pud)) #define pud_bad(pud) (!(pud_val(pud) & PUD_TABLE_BIT)) #define pud_present(pud) pte_present(pud_pte(pud)) +#define pud_leaf(pud) pud_sect(pud) #define pud_valid(pud) pte_valid(pud_pte(pud)) static inline void set_pud(pud_t *pudp, pud_t pud) diff --git a/arch/arm64/include/asm/preempt.h b/arch/arm64/include/asm/preempt.h index d49951647014..80e946b2abee 100644 --- a/arch/arm64/include/asm/preempt.h +++ b/arch/arm64/include/asm/preempt.h @@ -79,11 +79,11 @@ static inline bool should_resched(int preempt_offset) return pc == preempt_offset; } -#ifdef CONFIG_PREEMPT +#ifdef CONFIG_PREEMPTION void preempt_schedule(void); #define __preempt_schedule() preempt_schedule() void preempt_schedule_notrace(void); #define __preempt_schedule_notrace() preempt_schedule_notrace() -#endif /* CONFIG_PREEMPT */ +#endif /* CONFIG_PREEMPTION */ #endif /* __ASM_PREEMPT_H */ diff --git a/arch/arm64/include/asm/ptdump.h b/arch/arm64/include/asm/ptdump.h index 0b8e7269ec82..38187f74e089 100644 --- a/arch/arm64/include/asm/ptdump.h +++ b/arch/arm64/include/asm/ptdump.h @@ -5,7 +5,7 @@ #ifndef __ASM_PTDUMP_H #define __ASM_PTDUMP_H -#ifdef CONFIG_ARM64_PTDUMP_CORE +#ifdef CONFIG_PTDUMP_CORE #include <linux/mm_types.h> #include <linux/seq_file.h> @@ -21,15 +21,15 @@ struct ptdump_info { unsigned long base_addr; }; -void ptdump_walk_pgd(struct seq_file *s, struct ptdump_info *info); -#ifdef CONFIG_ARM64_PTDUMP_DEBUGFS +void ptdump_walk(struct seq_file *s, struct ptdump_info *info); +#ifdef CONFIG_PTDUMP_DEBUGFS void ptdump_debugfs_register(struct ptdump_info *info, const char *name); #else static inline void ptdump_debugfs_register(struct ptdump_info *info, const char *name) { } #endif void ptdump_check_wx(void); -#endif /* CONFIG_ARM64_PTDUMP_CORE */ +#endif /* CONFIG_PTDUMP_CORE */ #ifdef CONFIG_DEBUG_WX #define debug_checkwx() ptdump_check_wx() diff --git a/arch/arm64/include/asm/ptrace.h b/arch/arm64/include/asm/ptrace.h index fbebb411ae20..bf57308fcd63 100644 --- a/arch/arm64/include/asm/ptrace.h +++ b/arch/arm64/include/asm/ptrace.h @@ -62,6 +62,7 @@ #define PSR_AA32_I_BIT 0x00000080 #define PSR_AA32_A_BIT 0x00000100 #define PSR_AA32_E_BIT 0x00000200 +#define PSR_AA32_PAN_BIT 0x00400000 #define PSR_AA32_SSBS_BIT 0x00800000 #define PSR_AA32_DIT_BIT 0x01000000 #define PSR_AA32_Q_BIT 0x08000000 diff --git a/arch/arm64/include/asm/sections.h b/arch/arm64/include/asm/sections.h index 25a73aab438f..3994169985ef 100644 --- a/arch/arm64/include/asm/sections.h +++ b/arch/arm64/include/asm/sections.h @@ -8,7 +8,6 @@ #include <asm-generic/sections.h> extern char __alt_instructions[], __alt_instructions_end[]; -extern char __exception_text_start[], __exception_text_end[]; extern char __hibernate_exit_text_start[], __hibernate_exit_text_end[]; extern char __hyp_idmap_text_start[], __hyp_idmap_text_end[]; extern char __hyp_text_start[], __hyp_text_end[]; diff --git a/arch/arm64/include/asm/simd.h b/arch/arm64/include/asm/simd.h index 7434844036d3..89cba2622b79 100644 --- a/arch/arm64/include/asm/simd.h +++ b/arch/arm64/include/asm/simd.h @@ -26,6 +26,8 @@ DECLARE_PER_CPU(bool, fpsimd_context_busy); static __must_check inline bool may_use_simd(void) { /* + * We must make sure that the SVE has been initialized properly + * before using the SIMD in kernel. * fpsimd_context_busy is only set while preemption is disabled, * and is clear whenever preemption is enabled. Since * this_cpu_read() is atomic w.r.t. preemption, fpsimd_context_busy @@ -33,8 +35,10 @@ static __must_check inline bool may_use_simd(void) * migrated, and if it's clear we cannot be migrated to a CPU * where it is set. */ - return !in_irq() && !irqs_disabled() && !in_nmi() && - !this_cpu_read(fpsimd_context_busy); + return !WARN_ON(!system_capabilities_finalized()) && + system_supports_fpsimd() && + !in_irq() && !irqs_disabled() && !in_nmi() && + !this_cpu_read(fpsimd_context_busy); } #else /* ! CONFIG_KERNEL_MODE_NEON */ diff --git a/arch/arm64/include/asm/spinlock.h b/arch/arm64/include/asm/spinlock.h index b093b287babf..102404dc1e13 100644 --- a/arch/arm64/include/asm/spinlock.h +++ b/arch/arm64/include/asm/spinlock.h @@ -11,4 +11,13 @@ /* See include/linux/spinlock.h */ #define smp_mb__after_spinlock() smp_mb() +/* + * Changing this will break osq_lock() thanks to the call inside + * smp_cond_load_relaxed(). + * + * See: + * https://lore.kernel.org/lkml/20200110100612.GC2827@hirez.programming.kicks-ass.net + */ +#define vcpu_is_preempted(cpu) false + #endif /* __ASM_SPINLOCK_H */ diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h index 6e919fafb43d..b91570ff9db1 100644 --- a/arch/arm64/include/asm/sysreg.h +++ b/arch/arm64/include/asm/sysreg.h @@ -146,6 +146,7 @@ #define SYS_ID_ISAR4_EL1 sys_reg(3, 0, 0, 2, 4) #define SYS_ID_ISAR5_EL1 sys_reg(3, 0, 0, 2, 5) #define SYS_ID_MMFR4_EL1 sys_reg(3, 0, 0, 2, 6) +#define SYS_ID_ISAR6_EL1 sys_reg(3, 0, 0, 2, 7) #define SYS_MVFR0_EL1 sys_reg(3, 0, 0, 3, 0) #define SYS_MVFR1_EL1 sys_reg(3, 0, 0, 3, 1) @@ -365,6 +366,9 @@ #define SYS_CTR_EL0 sys_reg(3, 3, 0, 0, 1) #define SYS_DCZID_EL0 sys_reg(3, 3, 0, 0, 7) +#define SYS_RNDR_EL0 sys_reg(3, 3, 2, 4, 0) +#define SYS_RNDRRS_EL0 sys_reg(3, 3, 2, 4, 1) + #define SYS_PMCR_EL0 sys_reg(3, 3, 9, 12, 0) #define SYS_PMCNTENSET_EL0 sys_reg(3, 3, 9, 12, 1) #define SYS_PMCNTENCLR_EL0 sys_reg(3, 3, 9, 12, 2) @@ -538,7 +542,20 @@ SCTLR_EL1_NTWE | SCTLR_ELx_IESB | SCTLR_EL1_SPAN |\ ENDIAN_SET_EL1 | SCTLR_EL1_UCI | SCTLR_EL1_RES1) +/* MAIR_ELx memory attributes (used by Linux) */ +#define MAIR_ATTR_DEVICE_nGnRnE UL(0x00) +#define MAIR_ATTR_DEVICE_nGnRE UL(0x04) +#define MAIR_ATTR_DEVICE_GRE UL(0x0c) +#define MAIR_ATTR_NORMAL_NC UL(0x44) +#define MAIR_ATTR_NORMAL_WT UL(0xbb) +#define MAIR_ATTR_NORMAL UL(0xff) +#define MAIR_ATTR_MASK UL(0xff) + +/* Position the attr at the correct index */ +#define MAIR_ATTRIDX(attr, idx) ((attr) << ((idx) * 8)) + /* id_aa64isar0 */ +#define ID_AA64ISAR0_RNDR_SHIFT 60 #define ID_AA64ISAR0_TS_SHIFT 52 #define ID_AA64ISAR0_FHM_SHIFT 48 #define ID_AA64ISAR0_DP_SHIFT 44 @@ -553,6 +570,10 @@ #define ID_AA64ISAR0_AES_SHIFT 4 /* id_aa64isar1 */ +#define ID_AA64ISAR1_I8MM_SHIFT 52 +#define ID_AA64ISAR1_DGH_SHIFT 48 +#define ID_AA64ISAR1_BF16_SHIFT 44 +#define ID_AA64ISAR1_SPECRES_SHIFT 40 #define ID_AA64ISAR1_SB_SHIFT 36 #define ID_AA64ISAR1_FRINTTS_SHIFT 32 #define ID_AA64ISAR1_GPI_SHIFT 28 @@ -605,12 +626,20 @@ #define ID_AA64PFR1_SSBS_PSTATE_INSNS 2 /* id_aa64zfr0 */ +#define ID_AA64ZFR0_F64MM_SHIFT 56 +#define ID_AA64ZFR0_F32MM_SHIFT 52 +#define ID_AA64ZFR0_I8MM_SHIFT 44 #define ID_AA64ZFR0_SM4_SHIFT 40 #define ID_AA64ZFR0_SHA3_SHIFT 32 +#define ID_AA64ZFR0_BF16_SHIFT 20 #define ID_AA64ZFR0_BITPERM_SHIFT 16 #define ID_AA64ZFR0_AES_SHIFT 4 #define ID_AA64ZFR0_SVEVER_SHIFT 0 +#define ID_AA64ZFR0_F64MM 0x1 +#define ID_AA64ZFR0_F32MM 0x1 +#define ID_AA64ZFR0_I8MM 0x1 +#define ID_AA64ZFR0_BF16 0x1 #define ID_AA64ZFR0_SM4 0x1 #define ID_AA64ZFR0_SHA3 0x1 #define ID_AA64ZFR0_BITPERM 0x1 @@ -655,6 +684,7 @@ #define ID_AA64MMFR1_VMIDBITS_16 2 /* id_aa64mmfr2 */ +#define ID_AA64MMFR2_E0PD_SHIFT 60 #define ID_AA64MMFR2_FWB_SHIFT 40 #define ID_AA64MMFR2_AT_SHIFT 32 #define ID_AA64MMFR2_LVA_SHIFT 16 @@ -679,6 +709,14 @@ #define ID_ISAR5_AES_SHIFT 4 #define ID_ISAR5_SEVL_SHIFT 0 +#define ID_ISAR6_I8MM_SHIFT 24 +#define ID_ISAR6_BF16_SHIFT 20 +#define ID_ISAR6_SPECRES_SHIFT 16 +#define ID_ISAR6_SB_SHIFT 12 +#define ID_ISAR6_FHM_SHIFT 8 +#define ID_ISAR6_DP_SHIFT 4 +#define ID_ISAR6_JSCVT_SHIFT 0 + #define MVFR0_FPROUND_SHIFT 28 #define MVFR0_FPSHVEC_SHIFT 24 #define MVFR0_FPSQRT_SHIFT 20 diff --git a/arch/arm64/include/asm/unistd.h b/arch/arm64/include/asm/unistd.h index 2629a68b8724..1dd22da1c3a9 100644 --- a/arch/arm64/include/asm/unistd.h +++ b/arch/arm64/include/asm/unistd.h @@ -38,11 +38,10 @@ #define __ARM_NR_compat_set_tls (__ARM_NR_COMPAT_BASE + 5) #define __ARM_NR_COMPAT_END (__ARM_NR_COMPAT_BASE + 0x800) -#define __NR_compat_syscalls 436 +#define __NR_compat_syscalls 439 #endif #define __ARCH_WANT_SYS_CLONE -#define __ARCH_WANT_SYS_CLONE3 #ifndef __COMPAT_SYSCALL_NR #include <uapi/asm/unistd.h> diff --git a/arch/arm64/include/asm/unistd32.h b/arch/arm64/include/asm/unistd32.h index 94ab29cf4f00..c1c61635f89c 100644 --- a/arch/arm64/include/asm/unistd32.h +++ b/arch/arm64/include/asm/unistd32.h @@ -879,6 +879,10 @@ __SYSCALL(__NR_fspick, sys_fspick) __SYSCALL(__NR_pidfd_open, sys_pidfd_open) #define __NR_clone3 435 __SYSCALL(__NR_clone3, sys_clone3) +#define __NR_openat2 437 +__SYSCALL(__NR_openat2, sys_openat2) +#define __NR_pidfd_getfd 438 +__SYSCALL(__NR_pidfd_getfd, sys_pidfd_getfd) /* * Please add new compat syscalls above this comment and update diff --git a/arch/arm64/include/asm/vdso/compat_gettimeofday.h b/arch/arm64/include/asm/vdso/compat_gettimeofday.h index c50ee1b7d5cd..537b1e695365 100644 --- a/arch/arm64/include/asm/vdso/compat_gettimeofday.h +++ b/arch/arm64/include/asm/vdso/compat_gettimeofday.h @@ -16,7 +16,7 @@ #define VDSO_HAS_CLOCK_GETRES 1 -#define VDSO_HAS_32BIT_FALLBACK 1 +#define BUILD_VDSO32 1 static __always_inline int gettimeofday_fallback(struct __kernel_old_timeval *_tv, diff --git a/arch/arm64/include/asm/vmalloc.h b/arch/arm64/include/asm/vmalloc.h new file mode 100644 index 000000000000..2ca708ab9b20 --- /dev/null +++ b/arch/arm64/include/asm/vmalloc.h @@ -0,0 +1,4 @@ +#ifndef _ASM_ARM64_VMALLOC_H +#define _ASM_ARM64_VMALLOC_H + +#endif /* _ASM_ARM64_VMALLOC_H */ diff --git a/arch/arm64/include/uapi/asm/hwcap.h b/arch/arm64/include/uapi/asm/hwcap.h index a1e72886b30c..7752d93bb50f 100644 --- a/arch/arm64/include/uapi/asm/hwcap.h +++ b/arch/arm64/include/uapi/asm/hwcap.h @@ -65,5 +65,13 @@ #define HWCAP2_SVESM4 (1 << 6) #define HWCAP2_FLAGM2 (1 << 7) #define HWCAP2_FRINT (1 << 8) +#define HWCAP2_SVEI8MM (1 << 9) +#define HWCAP2_SVEF32MM (1 << 10) +#define HWCAP2_SVEF64MM (1 << 11) +#define HWCAP2_SVEBF16 (1 << 12) +#define HWCAP2_I8MM (1 << 13) +#define HWCAP2_BF16 (1 << 14) +#define HWCAP2_DGH (1 << 15) +#define HWCAP2_RNG (1 << 16) #endif /* _UAPI__ASM_HWCAP_H */ diff --git a/arch/arm64/include/uapi/asm/kvm.h b/arch/arm64/include/uapi/asm/kvm.h index 820e5751ada7..ba85bb23f060 100644 --- a/arch/arm64/include/uapi/asm/kvm.h +++ b/arch/arm64/include/uapi/asm/kvm.h @@ -220,10 +220,18 @@ struct kvm_vcpu_events { #define KVM_REG_ARM_PTIMER_CVAL ARM64_SYS_REG(3, 3, 14, 2, 2) #define KVM_REG_ARM_PTIMER_CNT ARM64_SYS_REG(3, 3, 14, 0, 1) -/* EL0 Virtual Timer Registers */ +/* + * EL0 Virtual Timer Registers + * + * WARNING: + * KVM_REG_ARM_TIMER_CVAL and KVM_REG_ARM_TIMER_CNT are not defined + * with the appropriate register encodings. Their values have been + * accidentally swapped. As this is set API, the definitions here + * must be used, rather than ones derived from the encodings. + */ #define KVM_REG_ARM_TIMER_CTL ARM64_SYS_REG(3, 3, 14, 3, 1) -#define KVM_REG_ARM_TIMER_CNT ARM64_SYS_REG(3, 3, 14, 3, 2) #define KVM_REG_ARM_TIMER_CVAL ARM64_SYS_REG(3, 3, 14, 0, 2) +#define KVM_REG_ARM_TIMER_CNT ARM64_SYS_REG(3, 3, 14, 3, 2) /* KVM-as-firmware specific pseudo-registers */ #define KVM_REG_ARM_FW (0x0014 << KVM_REG_ARM_COPROC_SHIFT) diff --git a/arch/arm64/include/uapi/asm/ptrace.h b/arch/arm64/include/uapi/asm/ptrace.h index 7ed9294e2004..d1bb5b69f1ce 100644 --- a/arch/arm64/include/uapi/asm/ptrace.h +++ b/arch/arm64/include/uapi/asm/ptrace.h @@ -49,6 +49,7 @@ #define PSR_SSBS_BIT 0x00001000 #define PSR_PAN_BIT 0x00400000 #define PSR_UAO_BIT 0x00800000 +#define PSR_DIT_BIT 0x01000000 #define PSR_V_BIT 0x10000000 #define PSR_C_BIT 0x20000000 #define PSR_Z_BIT 0x40000000 diff --git a/arch/arm64/include/uapi/asm/unistd.h b/arch/arm64/include/uapi/asm/unistd.h index 4703d218663a..f83a70e07df8 100644 --- a/arch/arm64/include/uapi/asm/unistd.h +++ b/arch/arm64/include/uapi/asm/unistd.h @@ -19,5 +19,6 @@ #define __ARCH_WANT_NEW_STAT #define __ARCH_WANT_SET_GET_RLIMIT #define __ARCH_WANT_TIME32_SYSCALLS +#define __ARCH_WANT_SYS_CLONE3 #include <asm-generic/unistd.h> diff --git a/arch/arm64/kernel/acpi.c b/arch/arm64/kernel/acpi.c index 3a58e9db5cfe..a100483b47c4 100644 --- a/arch/arm64/kernel/acpi.c +++ b/arch/arm64/kernel/acpi.c @@ -274,7 +274,7 @@ int apei_claim_sea(struct pt_regs *regs) if (!IS_ENABLED(CONFIG_ACPI_APEI_GHES)) return err; - current_flags = arch_local_save_flags(); + current_flags = local_daif_save_flags(); /* * SEA can interrupt SError, mask it and describe this as an NMI so diff --git a/arch/arm64/kernel/armv8_deprecated.c b/arch/arm64/kernel/armv8_deprecated.c index ca158be21f83..7832b3216370 100644 --- a/arch/arm64/kernel/armv8_deprecated.c +++ b/arch/arm64/kernel/armv8_deprecated.c @@ -618,7 +618,8 @@ static struct insn_emulation_ops setend_ops = { }; /* - * Invoked as late_initcall, since not needed before init spawned. + * Invoked as core_initcall, which guarantees that the instruction + * emulation is ready for userspace. */ static int __init armv8_deprecated_init(void) { diff --git a/arch/arm64/kernel/cpu-reset.S b/arch/arm64/kernel/cpu-reset.S index 6ea337d464c4..32c7bf858dd9 100644 --- a/arch/arm64/kernel/cpu-reset.S +++ b/arch/arm64/kernel/cpu-reset.S @@ -42,11 +42,11 @@ ENTRY(__cpu_soft_restart) mov x0, #HVC_SOFT_RESTART hvc #0 // no return -1: mov x18, x1 // entry +1: mov x8, x1 // entry mov x0, x2 // arg0 mov x1, x3 // arg1 mov x2, x4 // arg2 - br x18 + br x8 ENDPROC(__cpu_soft_restart) .popsection diff --git a/arch/arm64/kernel/cpu_errata.c b/arch/arm64/kernel/cpu_errata.c index 6a09ca7644ea..703ad0a84f99 100644 --- a/arch/arm64/kernel/cpu_errata.c +++ b/arch/arm64/kernel/cpu_errata.c @@ -547,6 +547,9 @@ static const struct midr_range spectre_v2_safe_list[] = { MIDR_ALL_VERSIONS(MIDR_CORTEX_A53), MIDR_ALL_VERSIONS(MIDR_CORTEX_A55), MIDR_ALL_VERSIONS(MIDR_BRAHMA_B53), + MIDR_ALL_VERSIONS(MIDR_HISI_TSV110), + MIDR_ALL_VERSIONS(MIDR_QCOM_KRYO_3XX_SILVER), + MIDR_ALL_VERSIONS(MIDR_QCOM_KRYO_4XX_SILVER), { /* sentinel */ } }; @@ -756,6 +759,20 @@ static const struct arm64_cpu_capabilities erratum_843419_list[] = { }; #endif +#ifdef CONFIG_ARM64_WORKAROUND_SPECULATIVE_AT_VHE +static const struct midr_range erratum_speculative_at_vhe_list[] = { +#ifdef CONFIG_ARM64_ERRATUM_1165522 + /* Cortex A76 r0p0 to r2p0 */ + MIDR_RANGE(MIDR_CORTEX_A76, 0, 0, 2, 0), +#endif +#ifdef CONFIG_ARM64_ERRATUM_1530923 + /* Cortex A55 r0p0 to r2p0 */ + MIDR_RANGE(MIDR_CORTEX_A55, 0, 0, 2, 0), +#endif + {}, +}; +#endif + const struct arm64_cpu_capabilities arm64_errata[] = { #ifdef CONFIG_ARM64_WORKAROUND_CLEAN_CACHE { @@ -882,12 +899,11 @@ const struct arm64_cpu_capabilities arm64_errata[] = { ERRATA_MIDR_RANGE_LIST(erratum_1418040_list), }, #endif -#ifdef CONFIG_ARM64_ERRATUM_1165522 +#ifdef CONFIG_ARM64_WORKAROUND_SPECULATIVE_AT_VHE { - /* Cortex-A76 r0p0 to r2p0 */ - .desc = "ARM erratum 1165522", - .capability = ARM64_WORKAROUND_1165522, - ERRATA_MIDR_RANGE(MIDR_CORTEX_A76, 0, 0, 2, 0), + .desc = "ARM errata 1165522, 1530923", + .capability = ARM64_WORKAROUND_SPECULATIVE_AT_VHE, + ERRATA_MIDR_RANGE_LIST(erratum_speculative_at_vhe_list), }, #endif #ifdef CONFIG_ARM64_ERRATUM_1463225 @@ -924,7 +940,7 @@ const struct arm64_cpu_capabilities arm64_errata[] = { #ifdef CONFIG_ARM64_ERRATUM_1319367 { .desc = "ARM erratum 1319367", - .capability = ARM64_WORKAROUND_1319367, + .capability = ARM64_WORKAROUND_SPECULATIVE_AT_NVHE, ERRATA_MIDR_RANGE_LIST(ca57_a72), }, #endif diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c index 04cf64e9f0c9..0b6715625cf6 100644 --- a/arch/arm64/kernel/cpufeature.c +++ b/arch/arm64/kernel/cpufeature.c @@ -32,9 +32,7 @@ static unsigned long elf_hwcap __read_mostly; #define COMPAT_ELF_HWCAP_DEFAULT \ (COMPAT_HWCAP_HALF|COMPAT_HWCAP_THUMB|\ COMPAT_HWCAP_FAST_MULT|COMPAT_HWCAP_EDSP|\ - COMPAT_HWCAP_TLS|COMPAT_HWCAP_VFP|\ - COMPAT_HWCAP_VFPv3|COMPAT_HWCAP_VFPv4|\ - COMPAT_HWCAP_NEON|COMPAT_HWCAP_IDIV|\ + COMPAT_HWCAP_TLS|COMPAT_HWCAP_IDIV|\ COMPAT_HWCAP_LPAE) unsigned int compat_elf_hwcap __read_mostly = COMPAT_ELF_HWCAP_DEFAULT; unsigned int compat_elf_hwcap2 __read_mostly; @@ -47,19 +45,23 @@ static struct arm64_cpu_capabilities const __ro_after_init *cpu_hwcaps_ptrs[ARM6 /* Need also bit for ARM64_CB_PATCH */ DECLARE_BITMAP(boot_capabilities, ARM64_NPATCHABLE); +bool arm64_use_ng_mappings = false; +EXPORT_SYMBOL(arm64_use_ng_mappings); + /* * Flag to indicate if we have computed the system wide * capabilities based on the boot time active CPUs. This * will be used to determine if a new booting CPU should * go through the verification process to make sure that it * supports the system capabilities, without using a hotplug - * notifier. + * notifier. This is also used to decide if we could use + * the fast path for checking constant CPU caps. */ -static bool sys_caps_initialised; - -static inline void set_sys_caps_initialised(void) +DEFINE_STATIC_KEY_FALSE(arm64_const_caps_ready); +EXPORT_SYMBOL(arm64_const_caps_ready); +static inline void finalize_system_capabilities(void) { - sys_caps_initialised = true; + static_branch_enable(&arm64_const_caps_ready); } static int dump_cpu_hwcaps(struct notifier_block *self, unsigned long v, void *p) @@ -119,6 +121,7 @@ static void cpu_enable_cnp(struct arm64_cpu_capabilities const *cap); * sync with the documentation of the CPU feature register ABI. */ static const struct arm64_ftr_bits ftr_id_aa64isar0[] = { + ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR0_RNDR_SHIFT, 4, 0), ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR0_TS_SHIFT, 4, 0), ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR0_FHM_SHIFT, 4, 0), ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR0_DP_SHIFT, 4, 0), @@ -135,6 +138,10 @@ static const struct arm64_ftr_bits ftr_id_aa64isar0[] = { }; static const struct arm64_ftr_bits ftr_id_aa64isar1[] = { + ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR1_I8MM_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR1_DGH_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR1_BF16_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR1_SPECRES_SHIFT, 4, 0), ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR1_SB_SHIFT, 4, 0), ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR1_FRINTTS_SHIFT, 4, 0), ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_PTR_AUTH), @@ -177,10 +184,18 @@ static const struct arm64_ftr_bits ftr_id_aa64pfr1[] = { static const struct arm64_ftr_bits ftr_id_aa64zfr0[] = { ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SVE), + FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_F64MM_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SVE), + FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_F32MM_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SVE), + FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_I8MM_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SVE), FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_SM4_SHIFT, 4, 0), ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SVE), FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_SHA3_SHIFT, 4, 0), ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SVE), + FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_BF16_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SVE), FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_BITPERM_SHIFT, 4, 0), ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SVE), FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_AES_SHIFT, 4, 0), @@ -225,6 +240,7 @@ static const struct arm64_ftr_bits ftr_id_aa64mmfr1[] = { }; static const struct arm64_ftr_bits ftr_id_aa64mmfr2[] = { + ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_E0PD_SHIFT, 4, 0), ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_FWB_SHIFT, 4, 0), ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_AT_SHIFT, 4, 0), ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_LVA_SHIFT, 4, 0), @@ -313,6 +329,17 @@ static const struct arm64_ftr_bits ftr_id_mmfr4[] = { ARM64_FTR_END, }; +static const struct arm64_ftr_bits ftr_id_isar6[] = { + ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR6_I8MM_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR6_BF16_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR6_SPECRES_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR6_SB_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR6_FHM_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR6_DP_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR6_JSCVT_SHIFT, 4, 0), + ARM64_FTR_END, +}; + static const struct arm64_ftr_bits ftr_id_pfr0[] = { ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, 12, 4, 0), /* State3 */ ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, 8, 4, 0), /* State2 */ @@ -396,6 +423,7 @@ static const struct __ftr_reg_entry { ARM64_FTR_REG(SYS_ID_ISAR4_EL1, ftr_generic_32bits), ARM64_FTR_REG(SYS_ID_ISAR5_EL1, ftr_id_isar5), ARM64_FTR_REG(SYS_ID_MMFR4_EL1, ftr_id_mmfr4), + ARM64_FTR_REG(SYS_ID_ISAR6_EL1, ftr_id_isar6), /* Op1 = 0, CRn = 0, CRm = 3 */ ARM64_FTR_REG(SYS_MVFR0_EL1, ftr_generic_32bits), @@ -600,6 +628,7 @@ void __init init_cpu_features(struct cpuinfo_arm64 *info) init_cpu_ftr_reg(SYS_ID_ISAR3_EL1, info->reg_id_isar3); init_cpu_ftr_reg(SYS_ID_ISAR4_EL1, info->reg_id_isar4); init_cpu_ftr_reg(SYS_ID_ISAR5_EL1, info->reg_id_isar5); + init_cpu_ftr_reg(SYS_ID_ISAR6_EL1, info->reg_id_isar6); init_cpu_ftr_reg(SYS_ID_MMFR0_EL1, info->reg_id_mmfr0); init_cpu_ftr_reg(SYS_ID_MMFR1_EL1, info->reg_id_mmfr1); init_cpu_ftr_reg(SYS_ID_MMFR2_EL1, info->reg_id_mmfr2); @@ -753,6 +782,8 @@ void update_cpu_features(int cpu, info->reg_id_isar4, boot->reg_id_isar4); taint |= check_update_ftr_reg(SYS_ID_ISAR5_EL1, cpu, info->reg_id_isar5, boot->reg_id_isar5); + taint |= check_update_ftr_reg(SYS_ID_ISAR6_EL1, cpu, + info->reg_id_isar6, boot->reg_id_isar6); /* * Regardless of the value of the AuxReg field, the AIFSR, ADFSR, and @@ -785,7 +816,7 @@ void update_cpu_features(int cpu, /* Probe vector lengths, unless we already gave up on SVE */ if (id_aa64pfr0_sve(read_sanitised_ftr_reg(SYS_ID_AA64PFR0_EL1)) && - !sys_caps_initialised) + !system_capabilities_finalized()) sve_update_vq_map(); } @@ -831,6 +862,7 @@ static u64 __read_sysreg_by_encoding(u32 sys_id) read_sysreg_case(SYS_ID_ISAR3_EL1); read_sysreg_case(SYS_ID_ISAR4_EL1); read_sysreg_case(SYS_ID_ISAR5_EL1); + read_sysreg_case(SYS_ID_ISAR6_EL1); read_sysreg_case(SYS_MVFR0_EL1); read_sysreg_case(SYS_MVFR1_EL1); read_sysreg_case(SYS_MVFR2_EL1); @@ -965,6 +997,46 @@ has_useable_cnp(const struct arm64_cpu_capabilities *entry, int scope) return has_cpuid_feature(entry, scope); } +/* + * This check is triggered during the early boot before the cpufeature + * is initialised. Checking the status on the local CPU allows the boot + * CPU to detect the need for non-global mappings and thus avoiding a + * pagetable re-write after all the CPUs are booted. This check will be + * anyway run on individual CPUs, allowing us to get the consistent + * state once the SMP CPUs are up and thus make the switch to non-global + * mappings if required. + */ +bool kaslr_requires_kpti(void) +{ + if (!IS_ENABLED(CONFIG_RANDOMIZE_BASE)) + return false; + + /* + * E0PD does a similar job to KPTI so can be used instead + * where available. + */ + if (IS_ENABLED(CONFIG_ARM64_E0PD)) { + u64 mmfr2 = read_sysreg_s(SYS_ID_AA64MMFR2_EL1); + if (cpuid_feature_extract_unsigned_field(mmfr2, + ID_AA64MMFR2_E0PD_SHIFT)) + return false; + } + + /* + * Systems affected by Cavium erratum 24756 are incompatible + * with KPTI. + */ + if (IS_ENABLED(CONFIG_CAVIUM_ERRATUM_27456)) { + extern const struct midr_range cavium_erratum_27456_cpus[]; + + if (is_midr_in_range_list(read_cpuid_id(), + cavium_erratum_27456_cpus)) + return false; + } + + return kaslr_offset() > 0; +} + static bool __meltdown_safe = true; static int __kpti_forced; /* 0: not forced, >0: forced on, <0: forced off */ @@ -975,6 +1047,7 @@ static bool unmap_kernel_at_el0(const struct arm64_cpu_capabilities *entry, static const struct midr_range kpti_safe_list[] = { MIDR_ALL_VERSIONS(MIDR_CAVIUM_THUNDERX2), MIDR_ALL_VERSIONS(MIDR_BRCM_VULCAN), + MIDR_ALL_VERSIONS(MIDR_BRAHMA_B53), MIDR_ALL_VERSIONS(MIDR_CORTEX_A35), MIDR_ALL_VERSIONS(MIDR_CORTEX_A53), MIDR_ALL_VERSIONS(MIDR_CORTEX_A55), @@ -1008,7 +1081,7 @@ static bool unmap_kernel_at_el0(const struct arm64_cpu_capabilities *entry, } /* Useful for KASLR robustness */ - if (IS_ENABLED(CONFIG_RANDOMIZE_BASE) && kaslr_offset() > 0) { + if (kaslr_requires_kpti()) { if (!__kpti_forced) { str = "KASLR"; __kpti_forced = 1; @@ -1043,7 +1116,6 @@ kpti_install_ng_mappings(const struct arm64_cpu_capabilities *__unused) extern kpti_remap_fn idmap_kpti_install_ng_mappings; kpti_remap_fn *remap_fn; - static bool kpti_applied = false; int cpu = smp_processor_id(); /* @@ -1051,7 +1123,7 @@ kpti_install_ng_mappings(const struct arm64_cpu_capabilities *__unused) * it already or we have KASLR enabled and therefore have not * created any global mappings at all. */ - if (kpti_applied || kaslr_offset() > 0) + if (arm64_use_ng_mappings) return; remap_fn = (void *)__pa_symbol(idmap_kpti_install_ng_mappings); @@ -1061,7 +1133,7 @@ kpti_install_ng_mappings(const struct arm64_cpu_capabilities *__unused) cpu_uninstall_idmap(); if (!cpu) - kpti_applied = true; + arm64_use_ng_mappings = true; return; } @@ -1251,6 +1323,14 @@ static void cpu_enable_address_auth(struct arm64_cpu_capabilities const *cap) } #endif /* CONFIG_ARM64_PTR_AUTH */ +#ifdef CONFIG_ARM64_E0PD +static void cpu_enable_e0pd(struct arm64_cpu_capabilities const *cap) +{ + if (this_cpu_has_cap(ARM64_HAS_E0PD)) + sysreg_clear_set(tcr_el1, 0, TCR_E0PD1); +} +#endif /* CONFIG_ARM64_E0PD */ + #ifdef CONFIG_ARM64_PSEUDO_NMI static bool enable_pseudo_nmi; @@ -1291,7 +1371,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .cpu_enable = cpu_enable_pan, }, #endif /* CONFIG_ARM64_PAN */ -#if defined(CONFIG_AS_LSE) && defined(CONFIG_ARM64_LSE_ATOMICS) +#ifdef CONFIG_ARM64_LSE_ATOMICS { .desc = "LSE atomic instructions", .capability = ARM64_HAS_LSE_ATOMICS, @@ -1302,7 +1382,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .sign = FTR_UNSIGNED, .min_field_value = 2, }, -#endif /* CONFIG_AS_LSE && CONFIG_ARM64_LSE_ATOMICS */ +#endif /* CONFIG_ARM64_LSE_ATOMICS */ { .desc = "Software prefetching using PRFM", .capability = ARM64_HAS_NO_HW_PREFETCH, @@ -1368,7 +1448,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = { { /* FP/SIMD is not implemented */ .capability = ARM64_HAS_NO_FPSIMD, - .type = ARM64_CPUCAP_SYSTEM_FEATURE, + .type = ARM64_CPUCAP_BOOT_RESTRICTED_CPU_LOCAL_FEATURE, .min_field_value = 0, .matches = has_no_fpsimd, }, @@ -1567,6 +1647,31 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .min_field_value = 1, }, #endif +#ifdef CONFIG_ARM64_E0PD + { + .desc = "E0PD", + .capability = ARM64_HAS_E0PD, + .type = ARM64_CPUCAP_SYSTEM_FEATURE, + .sys_reg = SYS_ID_AA64MMFR2_EL1, + .sign = FTR_UNSIGNED, + .field_pos = ID_AA64MMFR2_E0PD_SHIFT, + .matches = has_cpuid_feature, + .min_field_value = 1, + .cpu_enable = cpu_enable_e0pd, + }, +#endif +#ifdef CONFIG_ARCH_RANDOM + { + .desc = "Random Number Generator", + .capability = ARM64_HAS_RNG, + .type = ARM64_CPUCAP_SYSTEM_FEATURE, + .matches = has_cpuid_feature, + .sys_reg = SYS_ID_AA64ISAR0_EL1, + .field_pos = ID_AA64ISAR0_RNDR_SHIFT, + .sign = FTR_UNSIGNED, + .min_field_value = 1, + }, +#endif {}, }; @@ -1596,6 +1701,12 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .match_list = list, \ } +#define HWCAP_CAP_MATCH(match, cap_type, cap) \ + { \ + __HWCAP_CAP(#cap, cap_type, cap) \ + .matches = match, \ + } + #ifdef CONFIG_ARM64_PTR_AUTH static const struct arm64_cpu_capabilities ptr_auth_hwcap_addr_matches[] = { { @@ -1638,6 +1749,7 @@ static const struct arm64_cpu_capabilities arm64_elf_hwcaps[] = { HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_FHM_SHIFT, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_ASIMDFHM), HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_TS_SHIFT, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_FLAGM), HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_TS_SHIFT, FTR_UNSIGNED, 2, CAP_HWCAP, KERNEL_HWCAP_FLAGM2), + HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_RNDR_SHIFT, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_RNG), HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_FP_SHIFT, FTR_SIGNED, 0, CAP_HWCAP, KERNEL_HWCAP_FP), HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_FP_SHIFT, FTR_SIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_FPHP), HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_ASIMD_SHIFT, FTR_SIGNED, 0, CAP_HWCAP, KERNEL_HWCAP_ASIMD), @@ -1651,6 +1763,9 @@ static const struct arm64_cpu_capabilities arm64_elf_hwcaps[] = { HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_LRCPC_SHIFT, FTR_UNSIGNED, 2, CAP_HWCAP, KERNEL_HWCAP_ILRCPC), HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_FRINTTS_SHIFT, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_FRINT), HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_SB_SHIFT, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_SB), + HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_BF16_SHIFT, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_BF16), + HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_DGH_SHIFT, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_DGH), + HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_I8MM_SHIFT, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_I8MM), HWCAP_CAP(SYS_ID_AA64MMFR2_EL1, ID_AA64MMFR2_AT_SHIFT, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_USCAT), #ifdef CONFIG_ARM64_SVE HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_SVE_SHIFT, FTR_UNSIGNED, ID_AA64PFR0_SVE, CAP_HWCAP, KERNEL_HWCAP_SVE), @@ -1658,8 +1773,12 @@ static const struct arm64_cpu_capabilities arm64_elf_hwcaps[] = { HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_AES_SHIFT, FTR_UNSIGNED, ID_AA64ZFR0_AES, CAP_HWCAP, KERNEL_HWCAP_SVEAES), HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_AES_SHIFT, FTR_UNSIGNED, ID_AA64ZFR0_AES_PMULL, CAP_HWCAP, KERNEL_HWCAP_SVEPMULL), HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_BITPERM_SHIFT, FTR_UNSIGNED, ID_AA64ZFR0_BITPERM, CAP_HWCAP, KERNEL_HWCAP_SVEBITPERM), + HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_BF16_SHIFT, FTR_UNSIGNED, ID_AA64ZFR0_BF16, CAP_HWCAP, KERNEL_HWCAP_SVEBF16), HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_SHA3_SHIFT, FTR_UNSIGNED, ID_AA64ZFR0_SHA3, CAP_HWCAP, KERNEL_HWCAP_SVESHA3), HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_SM4_SHIFT, FTR_UNSIGNED, ID_AA64ZFR0_SM4, CAP_HWCAP, KERNEL_HWCAP_SVESM4), + HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_I8MM_SHIFT, FTR_UNSIGNED, ID_AA64ZFR0_I8MM, CAP_HWCAP, KERNEL_HWCAP_SVEI8MM), + HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_F32MM_SHIFT, FTR_UNSIGNED, ID_AA64ZFR0_F32MM, CAP_HWCAP, KERNEL_HWCAP_SVEF32MM), + HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_F64MM_SHIFT, FTR_UNSIGNED, ID_AA64ZFR0_F64MM, CAP_HWCAP, KERNEL_HWCAP_SVEF64MM), #endif HWCAP_CAP(SYS_ID_AA64PFR1_EL1, ID_AA64PFR1_SSBS_SHIFT, FTR_UNSIGNED, ID_AA64PFR1_SSBS_PSTATE_INSNS, CAP_HWCAP, KERNEL_HWCAP_SSBS), #ifdef CONFIG_ARM64_PTR_AUTH @@ -1669,8 +1788,35 @@ static const struct arm64_cpu_capabilities arm64_elf_hwcaps[] = { {}, }; +#ifdef CONFIG_COMPAT +static bool compat_has_neon(const struct arm64_cpu_capabilities *cap, int scope) +{ + /* + * Check that all of MVFR1_EL1.{SIMDSP, SIMDInt, SIMDLS} are available, + * in line with that of arm32 as in vfp_init(). We make sure that the + * check is future proof, by making sure value is non-zero. + */ + u32 mvfr1; + + WARN_ON(scope == SCOPE_LOCAL_CPU && preemptible()); + if (scope == SCOPE_SYSTEM) + mvfr1 = read_sanitised_ftr_reg(SYS_MVFR1_EL1); + else + mvfr1 = read_sysreg_s(SYS_MVFR1_EL1); + + return cpuid_feature_extract_unsigned_field(mvfr1, MVFR1_SIMDSP_SHIFT) && + cpuid_feature_extract_unsigned_field(mvfr1, MVFR1_SIMDINT_SHIFT) && + cpuid_feature_extract_unsigned_field(mvfr1, MVFR1_SIMDLS_SHIFT); +} +#endif + static const struct arm64_cpu_capabilities compat_elf_hwcaps[] = { #ifdef CONFIG_COMPAT + HWCAP_CAP_MATCH(compat_has_neon, CAP_COMPAT_HWCAP, COMPAT_HWCAP_NEON), + HWCAP_CAP(SYS_MVFR1_EL1, MVFR1_SIMDFMAC_SHIFT, FTR_UNSIGNED, 1, CAP_COMPAT_HWCAP, COMPAT_HWCAP_VFPv4), + /* Arm v8 mandates MVFR0.FPDP == {0, 2}. So, piggy back on this for the presence of VFP support */ + HWCAP_CAP(SYS_MVFR0_EL1, MVFR0_FPDP_SHIFT, FTR_UNSIGNED, 2, CAP_COMPAT_HWCAP, COMPAT_HWCAP_VFP), + HWCAP_CAP(SYS_MVFR0_EL1, MVFR0_FPDP_SHIFT, FTR_UNSIGNED, 2, CAP_COMPAT_HWCAP, COMPAT_HWCAP_VFPv3), HWCAP_CAP(SYS_ID_ISAR5_EL1, ID_ISAR5_AES_SHIFT, FTR_UNSIGNED, 2, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_PMULL), HWCAP_CAP(SYS_ID_ISAR5_EL1, ID_ISAR5_AES_SHIFT, FTR_UNSIGNED, 1, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_AES), HWCAP_CAP(SYS_ID_ISAR5_EL1, ID_ISAR5_SHA1_SHIFT, FTR_UNSIGNED, 1, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_SHA1), @@ -1974,7 +2120,7 @@ void check_local_cpu_capabilities(void) * Otherwise, this CPU should verify that it has all the system * advertised capabilities. */ - if (!sys_caps_initialised) + if (!system_capabilities_finalized()) update_cpu_capabilities(SCOPE_LOCAL_CPU); else verify_local_cpu_capabilities(); @@ -1988,14 +2134,6 @@ static void __init setup_boot_cpu_capabilities(void) enable_cpu_capabilities(SCOPE_BOOT_CPU); } -DEFINE_STATIC_KEY_FALSE(arm64_const_caps_ready); -EXPORT_SYMBOL(arm64_const_caps_ready); - -static void __init mark_const_caps_ready(void) -{ - static_branch_enable(&arm64_const_caps_ready); -} - bool this_cpu_has_cap(unsigned int n) { if (!WARN_ON(preemptible()) && n < ARM64_NCAPS) { @@ -2054,7 +2192,6 @@ void __init setup_cpu_features(void) u32 cwg; setup_system_capabilities(); - mark_const_caps_ready(); setup_elf_hwcaps(arm64_elf_hwcaps); if (system_supports_32bit_el0()) @@ -2067,7 +2204,7 @@ void __init setup_cpu_features(void) minsigstksz_setup(); /* Advertise that we have computed the system capabilities */ - set_sys_caps_initialised(); + finalize_system_capabilities(); /* * Check for sane CTR_EL0.CWG value. diff --git a/arch/arm64/kernel/cpuinfo.c b/arch/arm64/kernel/cpuinfo.c index 56bba746da1c..86136075ae41 100644 --- a/arch/arm64/kernel/cpuinfo.c +++ b/arch/arm64/kernel/cpuinfo.c @@ -84,6 +84,14 @@ static const char *const hwcap_str[] = { "svesm4", "flagm2", "frint", + "svei8mm", + "svef32mm", + "svef64mm", + "svebf16", + "i8mm", + "bf16", + "dgh", + "rng", NULL }; @@ -360,6 +368,7 @@ static void __cpuinfo_store_cpu(struct cpuinfo_arm64 *info) info->reg_id_isar3 = read_cpuid(ID_ISAR3_EL1); info->reg_id_isar4 = read_cpuid(ID_ISAR4_EL1); info->reg_id_isar5 = read_cpuid(ID_ISAR5_EL1); + info->reg_id_isar6 = read_cpuid(ID_ISAR6_EL1); info->reg_id_mmfr0 = read_cpuid(ID_MMFR0_EL1); info->reg_id_mmfr1 = read_cpuid(ID_MMFR1_EL1); info->reg_id_mmfr2 = read_cpuid(ID_MMFR2_EL1); diff --git a/arch/arm64/kernel/entry-common.c b/arch/arm64/kernel/entry-common.c index 5dce5e56995a..fde59981445c 100644 --- a/arch/arm64/kernel/entry-common.c +++ b/arch/arm64/kernel/entry-common.c @@ -36,14 +36,14 @@ static void notrace el1_pc(struct pt_regs *regs, unsigned long esr) } NOKPROBE_SYMBOL(el1_pc); -static void el1_undef(struct pt_regs *regs) +static void notrace el1_undef(struct pt_regs *regs) { local_daif_inherit(regs); do_undefinstr(regs); } NOKPROBE_SYMBOL(el1_undef); -static void el1_inv(struct pt_regs *regs, unsigned long esr) +static void notrace el1_inv(struct pt_regs *regs, unsigned long esr) { local_daif_inherit(regs); bad_mode(regs, 0, esr); @@ -215,7 +215,7 @@ static void notrace el0_svc(struct pt_regs *regs) if (system_uses_irq_prio_masking()) gic_write_pmr(GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET); - el0_svc_handler(regs); + do_el0_svc(regs); } NOKPROBE_SYMBOL(el0_svc); @@ -281,7 +281,7 @@ static void notrace el0_svc_compat(struct pt_regs *regs) if (system_uses_irq_prio_masking()) gic_write_pmr(GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET); - el0_svc_compat_handler(regs); + do_el0_svc_compat(regs); } NOKPROBE_SYMBOL(el0_svc_compat); diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S index 7c6a0a41676f..9461d812ae27 100644 --- a/arch/arm64/kernel/entry.S +++ b/arch/arm64/kernel/entry.S @@ -60,16 +60,16 @@ .macro kernel_ventry, el, label, regsize = 64 .align 7 #ifdef CONFIG_UNMAP_KERNEL_AT_EL0 -alternative_if ARM64_UNMAP_KERNEL_AT_EL0 .if \el == 0 +alternative_if ARM64_UNMAP_KERNEL_AT_EL0 .if \regsize == 64 mrs x30, tpidrro_el0 msr tpidrro_el0, xzr .else mov x30, xzr .endif - .endif alternative_else_nop_endif + .endif #endif sub sp, sp, #S_FRAME_SIZE @@ -167,9 +167,13 @@ alternative_cb_end .if \el == 0 clear_gp_regs mrs x21, sp_el0 - ldr_this_cpu tsk, __entry_task, x20 // Ensure MDSCR_EL1.SS is clear, - ldr x19, [tsk, #TSK_TI_FLAGS] // since we can unmask debug - disable_step_tsk x19, x20 // exceptions when scheduling. + ldr_this_cpu tsk, __entry_task, x20 + msr sp_el0, tsk + + // Ensure MDSCR_EL1.SS is clear, since we can unmask debug exceptions + // when scheduling. + ldr x19, [tsk, #TSK_TI_FLAGS] + disable_step_tsk x19, x20 apply_ssbd 1, x22, x23 @@ -232,13 +236,6 @@ alternative_else_nop_endif str w21, [sp, #S_SYSCALLNO] .endif - /* - * Set sp_el0 to current thread_info. - */ - .if \el == 0 - msr sp_el0, tsk - .endif - /* Save pmr */ alternative_if ARM64_HAS_IRQ_PRIO_MASKING mrs_s x20, SYS_ICC_PMR_EL1 @@ -605,7 +602,7 @@ el1_irq: irq_handler -#ifdef CONFIG_PREEMPT +#ifdef CONFIG_PREEMPTION ldr x24, [tsk, #TSK_TI_PREEMPT] // get preempt count alternative_if ARM64_HAS_IRQ_PRIO_MASKING /* @@ -653,6 +650,7 @@ el0_sync: mov x0, sp bl el0_sync_handler b ret_to_user +ENDPROC(el0_sync) #ifdef CONFIG_COMPAT .align 6 @@ -661,16 +659,18 @@ el0_sync_compat: mov x0, sp bl el0_sync_compat_handler b ret_to_user -ENDPROC(el0_sync) +ENDPROC(el0_sync_compat) .align 6 el0_irq_compat: kernel_entry 0, 32 b el0_irq_naked +ENDPROC(el0_irq_compat) el0_error_compat: kernel_entry 0, 32 b el0_error_naked +ENDPROC(el0_error_compat) #endif .align 6 diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c index 3eb338f14386..94289d126993 100644 --- a/arch/arm64/kernel/fpsimd.c +++ b/arch/arm64/kernel/fpsimd.c @@ -269,6 +269,7 @@ static void sve_free(struct task_struct *task) */ static void task_fpsimd_load(void) { + WARN_ON(!system_supports_fpsimd()); WARN_ON(!have_cpu_fpsimd_context()); if (system_supports_sve() && test_thread_flag(TIF_SVE)) @@ -289,6 +290,7 @@ static void fpsimd_save(void) this_cpu_ptr(&fpsimd_last_state); /* set by fpsimd_bind_task_to_cpu() or fpsimd_bind_state_to_cpu() */ + WARN_ON(!system_supports_fpsimd()); WARN_ON(!have_cpu_fpsimd_context()); if (!test_thread_flag(TIF_FOREIGN_FPSTATE)) { @@ -1092,6 +1094,7 @@ void fpsimd_bind_task_to_cpu(void) struct fpsimd_last_state_struct *last = this_cpu_ptr(&fpsimd_last_state); + WARN_ON(!system_supports_fpsimd()); last->st = ¤t->thread.uw.fpsimd_state; last->sve_state = current->thread.sve_state; last->sve_vl = current->thread.sve_vl; @@ -1114,6 +1117,7 @@ void fpsimd_bind_state_to_cpu(struct user_fpsimd_state *st, void *sve_state, struct fpsimd_last_state_struct *last = this_cpu_ptr(&fpsimd_last_state); + WARN_ON(!system_supports_fpsimd()); WARN_ON(!in_softirq() && !irqs_disabled()); last->st = st; @@ -1128,8 +1132,19 @@ void fpsimd_bind_state_to_cpu(struct user_fpsimd_state *st, void *sve_state, */ void fpsimd_restore_current_state(void) { - if (!system_supports_fpsimd()) + /* + * For the tasks that were created before we detected the absence of + * FP/SIMD, the TIF_FOREIGN_FPSTATE could be set via fpsimd_thread_switch(), + * e.g, init. This could be then inherited by the children processes. + * If we later detect that the system doesn't support FP/SIMD, + * we must clear the flag for all the tasks to indicate that the + * FPSTATE is clean (as we can't have one) to avoid looping for ever in + * do_notify_resume(). + */ + if (!system_supports_fpsimd()) { + clear_thread_flag(TIF_FOREIGN_FPSTATE); return; + } get_cpu_fpsimd_context(); @@ -1148,7 +1163,7 @@ void fpsimd_restore_current_state(void) */ void fpsimd_update_current_state(struct user_fpsimd_state const *state) { - if (!system_supports_fpsimd()) + if (WARN_ON(!system_supports_fpsimd())) return; get_cpu_fpsimd_context(); @@ -1179,7 +1194,13 @@ void fpsimd_update_current_state(struct user_fpsimd_state const *state) void fpsimd_flush_task_state(struct task_struct *t) { t->thread.fpsimd_cpu = NR_CPUS; - + /* + * If we don't support fpsimd, bail out after we have + * reset the fpsimd_cpu for this task and clear the + * FPSTATE. + */ + if (!system_supports_fpsimd()) + return; barrier(); set_tsk_thread_flag(t, TIF_FOREIGN_FPSTATE); @@ -1193,6 +1214,7 @@ void fpsimd_flush_task_state(struct task_struct *t) */ static void fpsimd_flush_cpu_state(void) { + WARN_ON(!system_supports_fpsimd()); __this_cpu_write(fpsimd_last_state.st, NULL); set_thread_flag(TIF_FOREIGN_FPSTATE); } @@ -1203,6 +1225,8 @@ static void fpsimd_flush_cpu_state(void) */ void fpsimd_save_and_flush_cpu_state(void) { + if (!system_supports_fpsimd()) + return; WARN_ON(preemptible()); __get_cpu_fpsimd_context(); fpsimd_save(); diff --git a/arch/arm64/kernel/hibernate.c b/arch/arm64/kernel/hibernate.c index a96b2921d22c..590963c9c609 100644 --- a/arch/arm64/kernel/hibernate.c +++ b/arch/arm64/kernel/hibernate.c @@ -182,78 +182,79 @@ int arch_hibernation_header_restore(void *addr) } EXPORT_SYMBOL(arch_hibernation_header_restore); -/* - * Copies length bytes, starting at src_start into an new page, - * perform cache maintentance, then maps it at the specified address low - * address as executable. - * - * This is used by hibernate to copy the code it needs to execute when - * overwriting the kernel text. This function generates a new set of page - * tables, which it loads into ttbr0. - * - * Length is provided as we probably only want 4K of data, even on a 64K - * page system. - */ -static int create_safe_exec_page(void *src_start, size_t length, - unsigned long dst_addr, - phys_addr_t *phys_dst_addr, - void *(*allocator)(gfp_t mask), - gfp_t mask) +static int trans_pgd_map_page(pgd_t *trans_pgd, void *page, + unsigned long dst_addr, + pgprot_t pgprot) { - int rc = 0; - pgd_t *trans_pgd; pgd_t *pgdp; pud_t *pudp; pmd_t *pmdp; pte_t *ptep; - unsigned long dst = (unsigned long)allocator(mask); - - if (!dst) { - rc = -ENOMEM; - goto out; - } - - memcpy((void *)dst, src_start, length); - __flush_icache_range(dst, dst + length); - - trans_pgd = allocator(mask); - if (!trans_pgd) { - rc = -ENOMEM; - goto out; - } pgdp = pgd_offset_raw(trans_pgd, dst_addr); if (pgd_none(READ_ONCE(*pgdp))) { - pudp = allocator(mask); - if (!pudp) { - rc = -ENOMEM; - goto out; - } + pudp = (void *)get_safe_page(GFP_ATOMIC); + if (!pudp) + return -ENOMEM; pgd_populate(&init_mm, pgdp, pudp); } pudp = pud_offset(pgdp, dst_addr); if (pud_none(READ_ONCE(*pudp))) { - pmdp = allocator(mask); - if (!pmdp) { - rc = -ENOMEM; - goto out; - } + pmdp = (void *)get_safe_page(GFP_ATOMIC); + if (!pmdp) + return -ENOMEM; pud_populate(&init_mm, pudp, pmdp); } pmdp = pmd_offset(pudp, dst_addr); if (pmd_none(READ_ONCE(*pmdp))) { - ptep = allocator(mask); - if (!ptep) { - rc = -ENOMEM; - goto out; - } + ptep = (void *)get_safe_page(GFP_ATOMIC); + if (!ptep) + return -ENOMEM; pmd_populate_kernel(&init_mm, pmdp, ptep); } ptep = pte_offset_kernel(pmdp, dst_addr); - set_pte(ptep, pfn_pte(virt_to_pfn(dst), PAGE_KERNEL_EXEC)); + set_pte(ptep, pfn_pte(virt_to_pfn(page), PAGE_KERNEL_EXEC)); + + return 0; +} + +/* + * Copies length bytes, starting at src_start into an new page, + * perform cache maintenance, then maps it at the specified address low + * address as executable. + * + * This is used by hibernate to copy the code it needs to execute when + * overwriting the kernel text. This function generates a new set of page + * tables, which it loads into ttbr0. + * + * Length is provided as we probably only want 4K of data, even on a 64K + * page system. + */ +static int create_safe_exec_page(void *src_start, size_t length, + unsigned long dst_addr, + phys_addr_t *phys_dst_addr) +{ + void *page = (void *)get_safe_page(GFP_ATOMIC); + pgd_t *trans_pgd; + int rc; + + if (!page) + return -ENOMEM; + + memcpy(page, src_start, length); + __flush_icache_range((unsigned long)page, (unsigned long)page + length); + + trans_pgd = (void *)get_safe_page(GFP_ATOMIC); + if (!trans_pgd) + return -ENOMEM; + + rc = trans_pgd_map_page(trans_pgd, page, dst_addr, + PAGE_KERNEL_EXEC); + if (rc) + return rc; /* * Load our new page tables. A strict BBM approach requires that we @@ -269,13 +270,12 @@ static int create_safe_exec_page(void *src_start, size_t length, */ cpu_set_reserved_ttbr0(); local_flush_tlb_all(); - write_sysreg(phys_to_ttbr(virt_to_phys(pgdp)), ttbr0_el1); + write_sysreg(phys_to_ttbr(virt_to_phys(trans_pgd)), ttbr0_el1); isb(); - *phys_dst_addr = virt_to_phys((void *)dst); + *phys_dst_addr = virt_to_phys(page); -out: - return rc; + return 0; } #define dcache_clean_range(start, end) __flush_dcache_area(start, (end - start)) @@ -450,7 +450,7 @@ static int copy_pud(pgd_t *dst_pgdp, pgd_t *src_pgdp, unsigned long start, return -ENOMEM; } else { set_pud(dst_pudp, - __pud(pud_val(pud) & ~PMD_SECT_RDONLY)); + __pud(pud_val(pud) & ~PUD_SECT_RDONLY)); } } while (dst_pudp++, src_pudp++, addr = next, addr != end); @@ -476,6 +476,24 @@ static int copy_page_tables(pgd_t *dst_pgdp, unsigned long start, return 0; } +static int trans_pgd_create_copy(pgd_t **dst_pgdp, unsigned long start, + unsigned long end) +{ + int rc; + pgd_t *trans_pgd = (pgd_t *)get_safe_page(GFP_ATOMIC); + + if (!trans_pgd) { + pr_err("Failed to allocate memory for temporary page tables.\n"); + return -ENOMEM; + } + + rc = copy_page_tables(trans_pgd, start, end); + if (!rc) + *dst_pgdp = trans_pgd; + + return rc; +} + /* * Setup then Resume from the hibernate image using swsusp_arch_suspend_exit(). * @@ -484,7 +502,7 @@ static int copy_page_tables(pgd_t *dst_pgdp, unsigned long start, */ int swsusp_arch_resume(void) { - int rc = 0; + int rc; void *zero_page; size_t exit_size; pgd_t *tmp_pg_dir; @@ -497,15 +515,9 @@ int swsusp_arch_resume(void) * Create a second copy of just the linear map, and use this when * restoring. */ - tmp_pg_dir = (pgd_t *)get_safe_page(GFP_ATOMIC); - if (!tmp_pg_dir) { - pr_err("Failed to allocate memory for temporary page tables.\n"); - rc = -ENOMEM; - goto out; - } - rc = copy_page_tables(tmp_pg_dir, PAGE_OFFSET, PAGE_END); + rc = trans_pgd_create_copy(&tmp_pg_dir, PAGE_OFFSET, PAGE_END); if (rc) - goto out; + return rc; /* * We need a zero page that is zero before & after resume in order to @@ -514,8 +526,7 @@ int swsusp_arch_resume(void) zero_page = (void *)get_safe_page(GFP_ATOMIC); if (!zero_page) { pr_err("Failed to allocate zero page.\n"); - rc = -ENOMEM; - goto out; + return -ENOMEM; } /* @@ -530,11 +541,10 @@ int swsusp_arch_resume(void) */ rc = create_safe_exec_page(__hibernate_exit_text_start, exit_size, (unsigned long)hibernate_exit, - &phys_hibernate_exit, - (void *)get_safe_page, GFP_ATOMIC); + &phys_hibernate_exit); if (rc) { pr_err("Failed to create safe executable page for hibernate_exit code.\n"); - goto out; + return rc; } /* @@ -561,8 +571,7 @@ int swsusp_arch_resume(void) resume_hdr.reenter_kernel, restore_pblist, resume_hdr.__hyp_stub_vectors, virt_to_phys(zero_page)); -out: - return rc; + return 0; } int hibernate_resume_nonboot_cpu_disable(void) diff --git a/arch/arm64/kernel/kaslr.c b/arch/arm64/kernel/kaslr.c index 2a11a962e571..53b8a4ee64ff 100644 --- a/arch/arm64/kernel/kaslr.c +++ b/arch/arm64/kernel/kaslr.c @@ -120,6 +120,17 @@ u64 __init kaslr_early_init(u64 dt_phys) return 0; } + /* + * Mix in any entropy obtainable architecturally, open coded + * since this runs extremely early. + */ + if (__early_cpu_has_rndr()) { + unsigned long raw; + + if (__arm64_rndr(&raw)) + seed ^= raw; + } + if (!seed) { kaslr_status = KASLR_DISABLED_NO_SEED; return 0; diff --git a/arch/arm64/kernel/kexec_image.c b/arch/arm64/kernel/kexec_image.c index 29a9428486a5..af9987c154ca 100644 --- a/arch/arm64/kernel/kexec_image.c +++ b/arch/arm64/kernel/kexec_image.c @@ -47,10 +47,6 @@ static void *image_load(struct kimage *image, struct kexec_segment *kernel_segment; int ret; - /* We don't support crash kernels yet. */ - if (image->type == KEXEC_TYPE_CRASH) - return ERR_PTR(-EOPNOTSUPP); - /* * We require a kernel with an unambiguous Image header. Per * Documentation/arm64/booting.rst, this is the case when image_size diff --git a/arch/arm64/kernel/machine_kexec.c b/arch/arm64/kernel/machine_kexec.c index 0df8493624e0..8e9c924423b4 100644 --- a/arch/arm64/kernel/machine_kexec.c +++ b/arch/arm64/kernel/machine_kexec.c @@ -160,18 +160,6 @@ void machine_kexec(struct kimage *kimage) kexec_image_info(kimage); - pr_debug("%s:%d: control_code_page: %p\n", __func__, __LINE__, - kimage->control_code_page); - pr_debug("%s:%d: reboot_code_buffer_phys: %pa\n", __func__, __LINE__, - &reboot_code_buffer_phys); - pr_debug("%s:%d: reboot_code_buffer: %p\n", __func__, __LINE__, - reboot_code_buffer); - pr_debug("%s:%d: relocate_new_kernel: %p\n", __func__, __LINE__, - arm64_relocate_new_kernel); - pr_debug("%s:%d: relocate_new_kernel_size: 0x%lx(%lu) bytes\n", - __func__, __LINE__, arm64_relocate_new_kernel_size, - arm64_relocate_new_kernel_size); - /* * Copy arm64_relocate_new_kernel to the reboot_code_buffer for use * after the kernel is shut down. diff --git a/arch/arm64/kernel/machine_kexec_file.c b/arch/arm64/kernel/machine_kexec_file.c index 7b08bf9499b6..dd3ae8081b38 100644 --- a/arch/arm64/kernel/machine_kexec_file.c +++ b/arch/arm64/kernel/machine_kexec_file.c @@ -17,12 +17,15 @@ #include <linux/memblock.h> #include <linux/of_fdt.h> #include <linux/random.h> +#include <linux/slab.h> #include <linux/string.h> #include <linux/types.h> #include <linux/vmalloc.h> #include <asm/byteorder.h> /* relevant device tree properties */ +#define FDT_PROP_KEXEC_ELFHDR "linux,elfcorehdr" +#define FDT_PROP_MEM_RANGE "linux,usable-memory-range" #define FDT_PROP_INITRD_START "linux,initrd-start" #define FDT_PROP_INITRD_END "linux,initrd-end" #define FDT_PROP_BOOTARGS "bootargs" @@ -40,6 +43,10 @@ int arch_kimage_file_post_load_cleanup(struct kimage *image) vfree(image->arch.dtb); image->arch.dtb = NULL; + vfree(image->arch.elf_headers); + image->arch.elf_headers = NULL; + image->arch.elf_headers_sz = 0; + return kexec_image_post_load_cleanup_default(image); } @@ -55,6 +62,31 @@ static int setup_dtb(struct kimage *image, off = ret; + ret = fdt_delprop(dtb, off, FDT_PROP_KEXEC_ELFHDR); + if (ret && ret != -FDT_ERR_NOTFOUND) + goto out; + ret = fdt_delprop(dtb, off, FDT_PROP_MEM_RANGE); + if (ret && ret != -FDT_ERR_NOTFOUND) + goto out; + + if (image->type == KEXEC_TYPE_CRASH) { + /* add linux,elfcorehdr */ + ret = fdt_appendprop_addrrange(dtb, 0, off, + FDT_PROP_KEXEC_ELFHDR, + image->arch.elf_headers_mem, + image->arch.elf_headers_sz); + if (ret) + return (ret == -FDT_ERR_NOSPACE ? -ENOMEM : -EINVAL); + + /* add linux,usable-memory-range */ + ret = fdt_appendprop_addrrange(dtb, 0, off, + FDT_PROP_MEM_RANGE, + crashk_res.start, + crashk_res.end - crashk_res.start + 1); + if (ret) + return (ret == -FDT_ERR_NOSPACE ? -ENOMEM : -EINVAL); + } + /* add bootargs */ if (cmdline) { ret = fdt_setprop_string(dtb, off, FDT_PROP_BOOTARGS, cmdline); @@ -125,8 +157,8 @@ out: } /* - * More space needed so that we can add initrd, bootargs, kaslr-seed, and - * rng-seed. + * More space needed so that we can add initrd, bootargs, kaslr-seed, + * rng-seed, userable-memory-range and elfcorehdr. */ #define DTB_EXTRA_SPACE 0x1000 @@ -174,6 +206,43 @@ static int create_dtb(struct kimage *image, } } +static int prepare_elf_headers(void **addr, unsigned long *sz) +{ + struct crash_mem *cmem; + unsigned int nr_ranges; + int ret; + u64 i; + phys_addr_t start, end; + + nr_ranges = 1; /* for exclusion of crashkernel region */ + for_each_mem_range(i, &memblock.memory, NULL, NUMA_NO_NODE, + MEMBLOCK_NONE, &start, &end, NULL) + nr_ranges++; + + cmem = kmalloc(sizeof(struct crash_mem) + + sizeof(struct crash_mem_range) * nr_ranges, GFP_KERNEL); + if (!cmem) + return -ENOMEM; + + cmem->max_nr_ranges = nr_ranges; + cmem->nr_ranges = 0; + for_each_mem_range(i, &memblock.memory, NULL, NUMA_NO_NODE, + MEMBLOCK_NONE, &start, &end, NULL) { + cmem->ranges[cmem->nr_ranges].start = start; + cmem->ranges[cmem->nr_ranges].end = end - 1; + cmem->nr_ranges++; + } + + /* Exclude crashkernel region */ + ret = crash_exclude_mem_range(cmem, crashk_res.start, crashk_res.end); + + if (!ret) + ret = crash_prepare_elf64_headers(cmem, true, addr, sz); + + kfree(cmem); + return ret; +} + int load_other_segments(struct kimage *image, unsigned long kernel_load_addr, unsigned long kernel_size, @@ -181,14 +250,43 @@ int load_other_segments(struct kimage *image, char *cmdline) { struct kexec_buf kbuf; - void *dtb = NULL; - unsigned long initrd_load_addr = 0, dtb_len; + void *headers, *dtb = NULL; + unsigned long headers_sz, initrd_load_addr = 0, dtb_len; int ret = 0; kbuf.image = image; /* not allocate anything below the kernel */ kbuf.buf_min = kernel_load_addr + kernel_size; + /* load elf core header */ + if (image->type == KEXEC_TYPE_CRASH) { + ret = prepare_elf_headers(&headers, &headers_sz); + if (ret) { + pr_err("Preparing elf core header failed\n"); + goto out_err; + } + + kbuf.buffer = headers; + kbuf.bufsz = headers_sz; + kbuf.mem = KEXEC_BUF_MEM_UNKNOWN; + kbuf.memsz = headers_sz; + kbuf.buf_align = SZ_64K; /* largest supported page size */ + kbuf.buf_max = ULONG_MAX; + kbuf.top_down = true; + + ret = kexec_add_buffer(&kbuf); + if (ret) { + vfree(headers); + goto out_err; + } + image->arch.elf_headers = headers; + image->arch.elf_headers_mem = kbuf.mem; + image->arch.elf_headers_sz = headers_sz; + + pr_debug("Loaded elf core header at 0x%lx bufsz=0x%lx memsz=0x%lx\n", + image->arch.elf_headers_mem, headers_sz, headers_sz); + } + /* load initrd */ if (initrd) { kbuf.buffer = initrd; diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c index 71f788cd2b18..bbb0f0c145f6 100644 --- a/arch/arm64/kernel/process.c +++ b/arch/arm64/kernel/process.c @@ -360,8 +360,8 @@ int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src) asmlinkage void ret_from_fork(void) asm("ret_from_fork"); -int copy_thread(unsigned long clone_flags, unsigned long stack_start, - unsigned long stk_sz, struct task_struct *p) +int copy_thread_tls(unsigned long clone_flags, unsigned long stack_start, + unsigned long stk_sz, struct task_struct *p, unsigned long tls) { struct pt_regs *childregs = task_pt_regs(p); @@ -394,11 +394,11 @@ int copy_thread(unsigned long clone_flags, unsigned long stack_start, } /* - * If a TLS pointer was passed to clone (4th argument), use it - * for the new thread. + * If a TLS pointer was passed to clone, use it for the new + * thread. */ if (clone_flags & CLONE_SETTLS) - p->thread.uw.tp_value = childregs->regs[3]; + p->thread.uw.tp_value = tls; } else { memset(childregs, 0, sizeof(struct pt_regs)); childregs->pstate = PSR_MODE_EL1h; @@ -646,6 +646,6 @@ asmlinkage void __sched arm64_preempt_schedule_irq(void) * Only allow a task to be preempted once cpufeatures have been * enabled. */ - if (static_branch_likely(&arm64_const_caps_ready)) + if (system_capabilities_finalized()) preempt_schedule_irq(); } diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c index 6771c399d40c..cd6e5fa48b9c 100644 --- a/arch/arm64/kernel/ptrace.c +++ b/arch/arm64/kernel/ptrace.c @@ -615,6 +615,13 @@ static int gpr_set(struct task_struct *target, const struct user_regset *regset, return 0; } +static int fpr_active(struct task_struct *target, const struct user_regset *regset) +{ + if (!system_supports_fpsimd()) + return -ENODEV; + return regset->n; +} + /* * TODO: update fp accessors for lazy context switching (sync/flush hwstate) */ @@ -637,6 +644,9 @@ static int fpr_get(struct task_struct *target, const struct user_regset *regset, unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf) { + if (!system_supports_fpsimd()) + return -EINVAL; + if (target == current) fpsimd_preserve_current_state(); @@ -676,6 +686,9 @@ static int fpr_set(struct task_struct *target, const struct user_regset *regset, { int ret; + if (!system_supports_fpsimd()) + return -EINVAL; + ret = __fpr_set(target, regset, pos, count, kbuf, ubuf, 0); if (ret) return ret; @@ -1134,6 +1147,7 @@ static const struct user_regset aarch64_regsets[] = { */ .size = sizeof(u32), .align = sizeof(u32), + .active = fpr_active, .get = fpr_get, .set = fpr_set }, @@ -1348,6 +1362,9 @@ static int compat_vfp_get(struct task_struct *target, compat_ulong_t fpscr; int ret, vregs_end_pos; + if (!system_supports_fpsimd()) + return -EINVAL; + uregs = &target->thread.uw.fpsimd_state; if (target == current) @@ -1381,6 +1398,9 @@ static int compat_vfp_set(struct task_struct *target, compat_ulong_t fpscr; int ret, vregs_end_pos; + if (!system_supports_fpsimd()) + return -EINVAL; + uregs = &target->thread.uw.fpsimd_state; vregs_end_pos = VFP_STATE_SIZE - sizeof(compat_ulong_t); @@ -1438,6 +1458,7 @@ static const struct user_regset aarch32_regsets[] = { .n = VFP_STATE_SIZE / sizeof(compat_ulong_t), .size = sizeof(compat_ulong_t), .align = sizeof(compat_ulong_t), + .active = fpr_active, .get = compat_vfp_get, .set = compat_vfp_set }, diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c index 56f664561754..a34890bf309f 100644 --- a/arch/arm64/kernel/setup.c +++ b/arch/arm64/kernel/setup.c @@ -285,6 +285,13 @@ void __init setup_arch(char **cmdline_p) *cmdline_p = boot_command_line; + /* + * If know now we are going to need KPTI then use non-global + * mappings from the start, avoiding the cost of rewriting + * everything later. + */ + arm64_use_ng_mappings = kaslr_requires_kpti(); + early_fixmap_init(); early_ioremap_init(); @@ -353,9 +360,6 @@ void __init setup_arch(char **cmdline_p) init_task.thread_info.ttbr0 = __pa_symbol(empty_zero_page); #endif -#ifdef CONFIG_VT - conswitchp = &dummy_con; -#endif if (boot_args[1] || boot_args[2] || boot_args[3]) { pr_err("WARNING: x1-x3 nonzero in violation of boot protocol:\n" "\tx1: %016llx\n\tx2: %016llx\n\tx3: %016llx\n" diff --git a/arch/arm64/kernel/signal.c b/arch/arm64/kernel/signal.c index dd2cdc0d5be2..339882db5a91 100644 --- a/arch/arm64/kernel/signal.c +++ b/arch/arm64/kernel/signal.c @@ -371,6 +371,8 @@ static int parse_user_sigframe(struct user_ctxs *user, goto done; case FPSIMD_MAGIC: + if (!system_supports_fpsimd()) + goto invalid; if (user->fpsimd) goto invalid; @@ -506,7 +508,7 @@ static int restore_sigframe(struct pt_regs *regs, if (err == 0) err = parse_user_sigframe(&user, sf); - if (err == 0) { + if (err == 0 && system_supports_fpsimd()) { if (!user.fpsimd) return -EINVAL; @@ -623,7 +625,7 @@ static int setup_sigframe(struct rt_sigframe_user_layout *user, err |= __copy_to_user(&sf->uc.uc_sigmask, set, sizeof(*set)); - if (err == 0) { + if (err == 0 && system_supports_fpsimd()) { struct fpsimd_context __user *fpsimd_ctx = apply_user_offset(user, user->fpsimd_offset); err |= preserve_fpsimd_context(fpsimd_ctx); diff --git a/arch/arm64/kernel/signal32.c b/arch/arm64/kernel/signal32.c index 12a585386c2f..82feca6f7052 100644 --- a/arch/arm64/kernel/signal32.c +++ b/arch/arm64/kernel/signal32.c @@ -223,7 +223,7 @@ static int compat_restore_sigframe(struct pt_regs *regs, err |= !valid_user_regs(®s->user_regs, current); aux = (struct compat_aux_sigframe __user *) sf->uc.uc_regspace; - if (err == 0) + if (err == 0 && system_supports_fpsimd()) err |= compat_restore_vfp_context(&aux->vfp); return err; @@ -419,7 +419,7 @@ static int compat_setup_sigframe(struct compat_sigframe __user *sf, aux = (struct compat_aux_sigframe __user *) sf->uc.uc_regspace; - if (err == 0) + if (err == 0 && system_supports_fpsimd()) err |= compat_preserve_vfp_context(&aux->vfp); __put_user_error(0, &aux->end_magic, err); diff --git a/arch/arm64/kernel/ssbd.c b/arch/arm64/kernel/ssbd.c index 52cfc6148355..b26955f56750 100644 --- a/arch/arm64/kernel/ssbd.c +++ b/arch/arm64/kernel/ssbd.c @@ -37,7 +37,7 @@ static int ssbd_prctl_set(struct task_struct *task, unsigned long ctrl) /* Unsupported */ if (state == ARM64_SSBD_UNKNOWN) - return -EINVAL; + return -ENODEV; /* Treat the unaffected/mitigated state separately */ if (state == ARM64_SSBD_MITIGATED) { @@ -102,7 +102,7 @@ static int ssbd_prctl_get(struct task_struct *task) { switch (arm64_get_ssbd_state()) { case ARM64_SSBD_UNKNOWN: - return -EINVAL; + return -ENODEV; case ARM64_SSBD_FORCE_ENABLE: return PR_SPEC_DISABLE; case ARM64_SSBD_KERNEL: diff --git a/arch/arm64/kernel/syscall.c b/arch/arm64/kernel/syscall.c index 9a9d98a443fc..a12c0c88d345 100644 --- a/arch/arm64/kernel/syscall.c +++ b/arch/arm64/kernel/syscall.c @@ -154,14 +154,14 @@ static inline void sve_user_discard(void) sve_user_disable(); } -void el0_svc_handler(struct pt_regs *regs) +void do_el0_svc(struct pt_regs *regs) { sve_user_discard(); el0_svc_common(regs, regs->regs[8], __NR_syscalls, sys_call_table); } #ifdef CONFIG_COMPAT -void el0_svc_compat_handler(struct pt_regs *regs) +void do_el0_svc_compat(struct pt_regs *regs) { el0_svc_common(regs, regs->regs[7], __NR_compat_syscalls, compat_sys_call_table); diff --git a/arch/arm64/kernel/traps.c b/arch/arm64/kernel/traps.c index 73caf35c2262..cf402be5c573 100644 --- a/arch/arm64/kernel/traps.c +++ b/arch/arm64/kernel/traps.c @@ -144,9 +144,12 @@ void show_stack(struct task_struct *tsk, unsigned long *sp) #ifdef CONFIG_PREEMPT #define S_PREEMPT " PREEMPT" +#elif defined(CONFIG_PREEMPT_RT) +#define S_PREEMPT " PREEMPT_RT" #else #define S_PREEMPT "" #endif + #define S_SMP " SMP" static int __die(const char *str, int err, struct pt_regs *regs) diff --git a/arch/arm64/kernel/vdso32/Makefile b/arch/arm64/kernel/vdso32/Makefile index 76b327f88fbb..04df57b43cb1 100644 --- a/arch/arm64/kernel/vdso32/Makefile +++ b/arch/arm64/kernel/vdso32/Makefile @@ -115,9 +115,9 @@ VDSO_LDFLAGS += $(call cc32-ldoption,-fuse-ld=bfd) # Borrow vdsomunge.c from the arm vDSO # We have to use a relative path because scripts/Makefile.host prefixes -# $(hostprogs-y) with $(obj) +# $(hostprogs) with $(obj) munge := ../../../arm/vdso/vdsomunge -hostprogs-y := $(munge) +hostprogs := $(munge) c-obj-vdso := note.o c-obj-vdso-gettimeofday := vgettimeofday.o diff --git a/arch/arm64/kvm/debug.c b/arch/arm64/kvm/debug.c index 43487f035385..7a7e425616b5 100644 --- a/arch/arm64/kvm/debug.c +++ b/arch/arm64/kvm/debug.c @@ -101,7 +101,7 @@ void kvm_arm_reset_debug_ptr(struct kvm_vcpu *vcpu) void kvm_arm_setup_debug(struct kvm_vcpu *vcpu) { bool trap_debug = !(vcpu->arch.flags & KVM_ARM64_DEBUG_DIRTY); - unsigned long mdscr; + unsigned long mdscr, orig_mdcr_el2 = vcpu->arch.mdcr_el2; trace_kvm_arm_setup_debug(vcpu, vcpu->guest_debug); @@ -197,6 +197,10 @@ void kvm_arm_setup_debug(struct kvm_vcpu *vcpu) if (vcpu_read_sys_reg(vcpu, MDSCR_EL1) & (DBG_MDSCR_KDE | DBG_MDSCR_MDE)) vcpu->arch.flags |= KVM_ARM64_DEBUG_DIRTY; + /* Write mdcr_el2 changes since vcpu_load on VHE systems */ + if (has_vhe() && orig_mdcr_el2 != vcpu->arch.mdcr_el2) + write_sysreg(vcpu->arch.mdcr_el2, mdcr_el2); + trace_kvm_arm_set_dreg32("MDCR_EL2", vcpu->arch.mdcr_el2); trace_kvm_arm_set_dreg32("MDSCR_EL1", vcpu_read_sys_reg(vcpu, MDSCR_EL1)); } diff --git a/arch/arm64/kvm/guest.c b/arch/arm64/kvm/guest.c index 2fff06114a8f..2bd92301d32f 100644 --- a/arch/arm64/kvm/guest.c +++ b/arch/arm64/kvm/guest.c @@ -47,11 +47,6 @@ struct kvm_stats_debugfs_item debugfs_entries[] = { { NULL } }; -int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu) -{ - return 0; -} - static bool core_reg_offset_is_vreg(u64 off) { return off >= KVM_REG_ARM_CORE_REG(fp_regs.vregs) && diff --git a/arch/arm64/kvm/hyp/entry.S b/arch/arm64/kvm/hyp/entry.S index e5cc8d66bf53..d22d0534dd60 100644 --- a/arch/arm64/kvm/hyp/entry.S +++ b/arch/arm64/kvm/hyp/entry.S @@ -22,7 +22,12 @@ .text .pushsection .hyp.text, "ax" +/* + * We treat x18 as callee-saved as the host may use it as a platform + * register (e.g. for shadow call stack). + */ .macro save_callee_saved_regs ctxt + str x18, [\ctxt, #CPU_XREG_OFFSET(18)] stp x19, x20, [\ctxt, #CPU_XREG_OFFSET(19)] stp x21, x22, [\ctxt, #CPU_XREG_OFFSET(21)] stp x23, x24, [\ctxt, #CPU_XREG_OFFSET(23)] @@ -32,6 +37,8 @@ .endm .macro restore_callee_saved_regs ctxt + // We require \ctxt is not x18-x28 + ldr x18, [\ctxt, #CPU_XREG_OFFSET(18)] ldp x19, x20, [\ctxt, #CPU_XREG_OFFSET(19)] ldp x21, x22, [\ctxt, #CPU_XREG_OFFSET(21)] ldp x23, x24, [\ctxt, #CPU_XREG_OFFSET(23)] @@ -44,11 +51,11 @@ * u64 __guest_enter(struct kvm_vcpu *vcpu, * struct kvm_cpu_context *host_ctxt); */ -ENTRY(__guest_enter) +SYM_FUNC_START(__guest_enter) // x0: vcpu // x1: host context // x2-x17: clobbered by macros - // x18: guest context + // x29: guest context // Store the host regs save_callee_saved_regs x1 @@ -67,38 +74,34 @@ alternative_else_nop_endif ret 1: - add x18, x0, #VCPU_CONTEXT + add x29, x0, #VCPU_CONTEXT // Macro ptrauth_switch_to_guest format: // ptrauth_switch_to_guest(guest cxt, tmp1, tmp2, tmp3) // The below macro to restore guest keys is not implemented in C code // as it may cause Pointer Authentication key signing mismatch errors // when this feature is enabled for kernel code. - ptrauth_switch_to_guest x18, x0, x1, x2 + ptrauth_switch_to_guest x29, x0, x1, x2 // Restore guest regs x0-x17 - ldp x0, x1, [x18, #CPU_XREG_OFFSET(0)] - ldp x2, x3, [x18, #CPU_XREG_OFFSET(2)] - ldp x4, x5, [x18, #CPU_XREG_OFFSET(4)] - ldp x6, x7, [x18, #CPU_XREG_OFFSET(6)] - ldp x8, x9, [x18, #CPU_XREG_OFFSET(8)] - ldp x10, x11, [x18, #CPU_XREG_OFFSET(10)] - ldp x12, x13, [x18, #CPU_XREG_OFFSET(12)] - ldp x14, x15, [x18, #CPU_XREG_OFFSET(14)] - ldp x16, x17, [x18, #CPU_XREG_OFFSET(16)] - - // Restore guest regs x19-x29, lr - restore_callee_saved_regs x18 - - // Restore guest reg x18 - ldr x18, [x18, #CPU_XREG_OFFSET(18)] + ldp x0, x1, [x29, #CPU_XREG_OFFSET(0)] + ldp x2, x3, [x29, #CPU_XREG_OFFSET(2)] + ldp x4, x5, [x29, #CPU_XREG_OFFSET(4)] + ldp x6, x7, [x29, #CPU_XREG_OFFSET(6)] + ldp x8, x9, [x29, #CPU_XREG_OFFSET(8)] + ldp x10, x11, [x29, #CPU_XREG_OFFSET(10)] + ldp x12, x13, [x29, #CPU_XREG_OFFSET(12)] + ldp x14, x15, [x29, #CPU_XREG_OFFSET(14)] + ldp x16, x17, [x29, #CPU_XREG_OFFSET(16)] + + // Restore guest regs x18-x29, lr + restore_callee_saved_regs x29 // Do not touch any register after this! eret sb -ENDPROC(__guest_enter) -ENTRY(__guest_exit) +SYM_INNER_LABEL(__guest_exit, SYM_L_GLOBAL) // x0: return code // x1: vcpu // x2-x29,lr: vcpu regs @@ -114,7 +117,7 @@ ENTRY(__guest_exit) // Retrieve the guest regs x0-x1 from the stack ldp x2, x3, [sp], #16 // x0, x1 - // Store the guest regs x0-x1 and x4-x18 + // Store the guest regs x0-x1 and x4-x17 stp x2, x3, [x1, #CPU_XREG_OFFSET(0)] stp x4, x5, [x1, #CPU_XREG_OFFSET(4)] stp x6, x7, [x1, #CPU_XREG_OFFSET(6)] @@ -123,9 +126,8 @@ ENTRY(__guest_exit) stp x12, x13, [x1, #CPU_XREG_OFFSET(12)] stp x14, x15, [x1, #CPU_XREG_OFFSET(14)] stp x16, x17, [x1, #CPU_XREG_OFFSET(16)] - str x18, [x1, #CPU_XREG_OFFSET(18)] - // Store the guest regs x19-x29, lr + // Store the guest regs x18-x29, lr save_callee_saved_regs x1 get_host_ctxt x2, x3 @@ -192,4 +194,4 @@ abort_guest_exit_end: msr spsr_el2, x4 orr x0, x0, x5 1: ret -ENDPROC(__guest_exit) +SYM_FUNC_END(__guest_enter) diff --git a/arch/arm64/kvm/hyp/switch.c b/arch/arm64/kvm/hyp/switch.c index 72fbbd86eb5e..dfe8dd172512 100644 --- a/arch/arm64/kvm/hyp/switch.c +++ b/arch/arm64/kvm/hyp/switch.c @@ -28,7 +28,15 @@ /* Check whether the FP regs were dirtied while in the host-side run loop: */ static bool __hyp_text update_fp_enabled(struct kvm_vcpu *vcpu) { - if (vcpu->arch.host_thread_info->flags & _TIF_FOREIGN_FPSTATE) + /* + * When the system doesn't support FP/SIMD, we cannot rely on + * the _TIF_FOREIGN_FPSTATE flag. However, we always inject an + * abort on the very first access to FP and thus we should never + * see KVM_ARM64_FP_ENABLED. For added safety, make sure we always + * trap the accesses. + */ + if (!system_supports_fpsimd() || + vcpu->arch.host_thread_info->flags & _TIF_FOREIGN_FPSTATE) vcpu->arch.flags &= ~(KVM_ARM64_FP_ENABLED | KVM_ARM64_FP_HOST); @@ -119,7 +127,7 @@ static void __hyp_text __activate_traps_nvhe(struct kvm_vcpu *vcpu) write_sysreg(val, cptr_el2); - if (cpus_have_const_cap(ARM64_WORKAROUND_1319367)) { + if (cpus_have_const_cap(ARM64_WORKAROUND_SPECULATIVE_AT_NVHE)) { struct kvm_cpu_context *ctxt = &vcpu->arch.ctxt; isb(); @@ -158,11 +166,11 @@ static void deactivate_traps_vhe(void) write_sysreg(HCR_HOST_VHE_FLAGS, hcr_el2); /* - * ARM erratum 1165522 requires the actual execution of the above - * before we can switch to the EL2/EL0 translation regime used by + * ARM errata 1165522 and 1530923 require the actual execution of the + * above before we can switch to the EL2/EL0 translation regime used by * the host. */ - asm(ALTERNATIVE("nop", "isb", ARM64_WORKAROUND_1165522)); + asm(ALTERNATIVE("nop", "isb", ARM64_WORKAROUND_SPECULATIVE_AT_VHE)); write_sysreg(CPACR_EL1_DEFAULT, cpacr_el1); write_sysreg(vectors, vbar_el1); @@ -173,7 +181,7 @@ static void __hyp_text __deactivate_traps_nvhe(void) { u64 mdcr_el2 = read_sysreg(mdcr_el2); - if (cpus_have_const_cap(ARM64_WORKAROUND_1319367)) { + if (cpus_have_const_cap(ARM64_WORKAROUND_SPECULATIVE_AT_NVHE)) { u64 val; /* diff --git a/arch/arm64/kvm/hyp/sysreg-sr.c b/arch/arm64/kvm/hyp/sysreg-sr.c index 22b8128d19f6..7672a978926c 100644 --- a/arch/arm64/kvm/hyp/sysreg-sr.c +++ b/arch/arm64/kvm/hyp/sysreg-sr.c @@ -118,7 +118,7 @@ static void __hyp_text __sysreg_restore_el1_state(struct kvm_cpu_context *ctxt) write_sysreg(ctxt->sys_regs[MPIDR_EL1], vmpidr_el2); write_sysreg(ctxt->sys_regs[CSSELR_EL1], csselr_el1); - if (!cpus_have_const_cap(ARM64_WORKAROUND_1319367)) { + if (!cpus_have_const_cap(ARM64_WORKAROUND_SPECULATIVE_AT_NVHE)) { write_sysreg_el1(ctxt->sys_regs[SCTLR_EL1], SYS_SCTLR); write_sysreg_el1(ctxt->sys_regs[TCR_EL1], SYS_TCR); } else if (!ctxt->__hyp_running_vcpu) { @@ -149,7 +149,7 @@ static void __hyp_text __sysreg_restore_el1_state(struct kvm_cpu_context *ctxt) write_sysreg(ctxt->sys_regs[PAR_EL1], par_el1); write_sysreg(ctxt->sys_regs[TPIDR_EL1], tpidr_el1); - if (cpus_have_const_cap(ARM64_WORKAROUND_1319367) && + if (cpus_have_const_cap(ARM64_WORKAROUND_SPECULATIVE_AT_NVHE) && ctxt->__hyp_running_vcpu) { /* * Must only be done for host registers, hence the context diff --git a/arch/arm64/kvm/hyp/tlb.c b/arch/arm64/kvm/hyp/tlb.c index c2bc17ca6430..92f560e3e1aa 100644 --- a/arch/arm64/kvm/hyp/tlb.c +++ b/arch/arm64/kvm/hyp/tlb.c @@ -23,10 +23,10 @@ static void __hyp_text __tlb_switch_to_guest_vhe(struct kvm *kvm, local_irq_save(cxt->flags); - if (cpus_have_const_cap(ARM64_WORKAROUND_1165522)) { + if (cpus_have_const_cap(ARM64_WORKAROUND_SPECULATIVE_AT_VHE)) { /* - * For CPUs that are affected by ARM erratum 1165522, we - * cannot trust stage-1 to be in a correct state at that + * For CPUs that are affected by ARM errata 1165522 or 1530923, + * we cannot trust stage-1 to be in a correct state at that * point. Since we do not want to force a full load of the * vcpu state, we prevent the EL1 page-table walker to * allocate new TLBs. This is done by setting the EPD bits @@ -63,7 +63,7 @@ static void __hyp_text __tlb_switch_to_guest_vhe(struct kvm *kvm, static void __hyp_text __tlb_switch_to_guest_nvhe(struct kvm *kvm, struct tlb_inv_context *cxt) { - if (cpus_have_const_cap(ARM64_WORKAROUND_1319367)) { + if (cpus_have_const_cap(ARM64_WORKAROUND_SPECULATIVE_AT_NVHE)) { u64 val; /* @@ -103,7 +103,7 @@ static void __hyp_text __tlb_switch_to_host_vhe(struct kvm *kvm, write_sysreg(HCR_HOST_VHE_FLAGS, hcr_el2); isb(); - if (cpus_have_const_cap(ARM64_WORKAROUND_1165522)) { + if (cpus_have_const_cap(ARM64_WORKAROUND_SPECULATIVE_AT_VHE)) { /* Restore the registers to what they were */ write_sysreg_el1(cxt->tcr, SYS_TCR); write_sysreg_el1(cxt->sctlr, SYS_SCTLR); @@ -117,7 +117,7 @@ static void __hyp_text __tlb_switch_to_host_nvhe(struct kvm *kvm, { write_sysreg(0, vttbr_el2); - if (cpus_have_const_cap(ARM64_WORKAROUND_1319367)) { + if (cpus_have_const_cap(ARM64_WORKAROUND_SPECULATIVE_AT_NVHE)) { /* Ensure write of the host VMID */ isb(); /* Restore the host's TCR_EL1 */ diff --git a/arch/arm64/kvm/inject_fault.c b/arch/arm64/kvm/inject_fault.c index ccdb6a051ab2..6aafc2825c1c 100644 --- a/arch/arm64/kvm/inject_fault.c +++ b/arch/arm64/kvm/inject_fault.c @@ -14,9 +14,6 @@ #include <asm/kvm_emulate.h> #include <asm/esr.h> -#define PSTATE_FAULT_BITS_64 (PSR_MODE_EL1h | PSR_A_BIT | PSR_F_BIT | \ - PSR_I_BIT | PSR_D_BIT) - #define CURRENT_EL_SP_EL0_VECTOR 0x0 #define CURRENT_EL_SP_ELx_VECTOR 0x200 #define LOWER_EL_AArch64_VECTOR 0x400 @@ -50,6 +47,69 @@ static u64 get_except_vector(struct kvm_vcpu *vcpu, enum exception_type type) return vcpu_read_sys_reg(vcpu, VBAR_EL1) + exc_offset + type; } +/* + * When an exception is taken, most PSTATE fields are left unchanged in the + * handler. However, some are explicitly overridden (e.g. M[4:0]). Luckily all + * of the inherited bits have the same position in the AArch64/AArch32 SPSR_ELx + * layouts, so we don't need to shuffle these for exceptions from AArch32 EL0. + * + * For the SPSR_ELx layout for AArch64, see ARM DDI 0487E.a page C5-429. + * For the SPSR_ELx layout for AArch32, see ARM DDI 0487E.a page C5-426. + * + * Here we manipulate the fields in order of the AArch64 SPSR_ELx layout, from + * MSB to LSB. + */ +static unsigned long get_except64_pstate(struct kvm_vcpu *vcpu) +{ + unsigned long sctlr = vcpu_read_sys_reg(vcpu, SCTLR_EL1); + unsigned long old, new; + + old = *vcpu_cpsr(vcpu); + new = 0; + + new |= (old & PSR_N_BIT); + new |= (old & PSR_Z_BIT); + new |= (old & PSR_C_BIT); + new |= (old & PSR_V_BIT); + + // TODO: TCO (if/when ARMv8.5-MemTag is exposed to guests) + + new |= (old & PSR_DIT_BIT); + + // PSTATE.UAO is set to zero upon any exception to AArch64 + // See ARM DDI 0487E.a, page D5-2579. + + // PSTATE.PAN is unchanged unless SCTLR_ELx.SPAN == 0b0 + // SCTLR_ELx.SPAN is RES1 when ARMv8.1-PAN is not implemented + // See ARM DDI 0487E.a, page D5-2578. + new |= (old & PSR_PAN_BIT); + if (!(sctlr & SCTLR_EL1_SPAN)) + new |= PSR_PAN_BIT; + + // PSTATE.SS is set to zero upon any exception to AArch64 + // See ARM DDI 0487E.a, page D2-2452. + + // PSTATE.IL is set to zero upon any exception to AArch64 + // See ARM DDI 0487E.a, page D1-2306. + + // PSTATE.SSBS is set to SCTLR_ELx.DSSBS upon any exception to AArch64 + // See ARM DDI 0487E.a, page D13-3258 + if (sctlr & SCTLR_ELx_DSSBS) + new |= PSR_SSBS_BIT; + + // PSTATE.BTYPE is set to zero upon any exception to AArch64 + // See ARM DDI 0487E.a, pages D1-2293 to D1-2294. + + new |= PSR_D_BIT; + new |= PSR_A_BIT; + new |= PSR_I_BIT; + new |= PSR_F_BIT; + + new |= PSR_MODE_EL1h; + + return new; +} + static void inject_abt64(struct kvm_vcpu *vcpu, bool is_iabt, unsigned long addr) { unsigned long cpsr = *vcpu_cpsr(vcpu); @@ -59,7 +119,7 @@ static void inject_abt64(struct kvm_vcpu *vcpu, bool is_iabt, unsigned long addr vcpu_write_elr_el1(vcpu, *vcpu_pc(vcpu)); *vcpu_pc(vcpu) = get_except_vector(vcpu, except_type_sync); - *vcpu_cpsr(vcpu) = PSTATE_FAULT_BITS_64; + *vcpu_cpsr(vcpu) = get_except64_pstate(vcpu); vcpu_write_spsr(vcpu, cpsr); vcpu_write_sys_reg(vcpu, addr, FAR_EL1); @@ -94,7 +154,7 @@ static void inject_undef64(struct kvm_vcpu *vcpu) vcpu_write_elr_el1(vcpu, *vcpu_pc(vcpu)); *vcpu_pc(vcpu) = get_except_vector(vcpu, except_type_sync); - *vcpu_cpsr(vcpu) = PSTATE_FAULT_BITS_64; + *vcpu_cpsr(vcpu) = get_except64_pstate(vcpu); vcpu_write_spsr(vcpu, cpsr); /* diff --git a/arch/arm64/kvm/reset.c b/arch/arm64/kvm/reset.c index f4a8ae918827..30b7ea680f66 100644 --- a/arch/arm64/kvm/reset.c +++ b/arch/arm64/kvm/reset.c @@ -204,7 +204,7 @@ bool kvm_arm_vcpu_is_finalized(struct kvm_vcpu *vcpu) return true; } -void kvm_arch_vcpu_uninit(struct kvm_vcpu *vcpu) +void kvm_arm_vcpu_destroy(struct kvm_vcpu *vcpu) { kfree(vcpu->arch.sve_state); } diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c index 46822afc57e0..3e909b117f0c 100644 --- a/arch/arm64/kvm/sys_regs.c +++ b/arch/arm64/kvm/sys_regs.c @@ -1424,7 +1424,7 @@ static const struct sys_reg_desc sys_reg_descs[] = { ID_SANITISED(ID_ISAR4_EL1), ID_SANITISED(ID_ISAR5_EL1), ID_SANITISED(ID_MMFR4_EL1), - ID_UNALLOCATED(2,7), + ID_SANITISED(ID_ISAR6_EL1), /* CRm=3 */ ID_SANITISED(MVFR0_EL1), @@ -2098,9 +2098,9 @@ static void unhandled_cp_access(struct kvm_vcpu *vcpu, WARN_ON(1); } - kvm_err("Unsupported guest CP%d access at: %08lx [%08lx]\n", - cp, *vcpu_pc(vcpu), *vcpu_cpsr(vcpu)); - print_sys_reg_instr(params); + print_sys_reg_msg(params, + "Unsupported guest CP%d access at: %08lx [%08lx]\n", + cp, *vcpu_pc(vcpu), *vcpu_cpsr(vcpu)); kvm_inject_undefined(vcpu); } @@ -2233,6 +2233,12 @@ int kvm_handle_cp14_32(struct kvm_vcpu *vcpu, struct kvm_run *run) NULL, 0); } +static bool is_imp_def_sys_reg(struct sys_reg_params *params) +{ + // See ARM DDI 0487E.a, section D12.3.2 + return params->Op0 == 3 && (params->CRn & 0b1011) == 0b1011; +} + static int emulate_sys_reg(struct kvm_vcpu *vcpu, struct sys_reg_params *params) { @@ -2248,10 +2254,12 @@ static int emulate_sys_reg(struct kvm_vcpu *vcpu, if (likely(r)) { perform_access(vcpu, params, r); + } else if (is_imp_def_sys_reg(params)) { + kvm_inject_undefined(vcpu); } else { - kvm_err("Unsupported guest sys_reg access at: %lx [%08lx]\n", - *vcpu_pc(vcpu), *vcpu_cpsr(vcpu)); - print_sys_reg_instr(params); + print_sys_reg_msg(params, + "Unsupported guest sys_reg access at: %lx [%08lx]\n", + *vcpu_pc(vcpu), *vcpu_cpsr(vcpu)); kvm_inject_undefined(vcpu); } return 1; @@ -2360,8 +2368,11 @@ static const struct sys_reg_desc *index_to_sys_reg_desc(struct kvm_vcpu *vcpu, if ((id & KVM_REG_ARM_COPROC_MASK) != KVM_REG_ARM64_SYSREG) return NULL; + if (!index_to_params(id, ¶ms)) + return NULL; + table = get_target_table(vcpu->arch.target, true, &num); - r = find_reg_by_id(id, ¶ms, table, num); + r = find_reg(¶ms, table, num); if (!r) r = find_reg(¶ms, sys_reg_descs, ARRAY_SIZE(sys_reg_descs)); diff --git a/arch/arm64/kvm/sys_regs.h b/arch/arm64/kvm/sys_regs.h index 9bca0312d798..5a6fc30f5989 100644 --- a/arch/arm64/kvm/sys_regs.h +++ b/arch/arm64/kvm/sys_regs.h @@ -62,11 +62,24 @@ struct sys_reg_desc { #define REG_HIDDEN_USER (1 << 0) /* hidden from userspace ioctls */ #define REG_HIDDEN_GUEST (1 << 1) /* hidden from guest */ -static inline void print_sys_reg_instr(const struct sys_reg_params *p) +static __printf(2, 3) +inline void print_sys_reg_msg(const struct sys_reg_params *p, + char *fmt, ...) { + va_list va; + + va_start(va, fmt); /* Look, we even formatted it for you to paste into the table! */ - kvm_pr_unimpl(" { Op0(%2u), Op1(%2u), CRn(%2u), CRm(%2u), Op2(%2u), func_%s },\n", + kvm_pr_unimpl("%pV { Op0(%2u), Op1(%2u), CRn(%2u), CRm(%2u), Op2(%2u), func_%s },\n", + &(struct va_format){ fmt, &va }, p->Op0, p->Op1, p->CRn, p->CRm, p->Op2, p->is_write ? "write" : "read"); + va_end(va); +} + +static inline void print_sys_reg_instr(const struct sys_reg_params *p) +{ + /* GCC warns on an empty format string */ + print_sys_reg_msg(p, "%s", ""); } static inline bool ignore_write(struct kvm_vcpu *vcpu, diff --git a/arch/arm64/kvm/va_layout.c b/arch/arm64/kvm/va_layout.c index dab1fea4752a..a4f48c1ac28c 100644 --- a/arch/arm64/kvm/va_layout.c +++ b/arch/arm64/kvm/va_layout.c @@ -13,52 +13,46 @@ #include <asm/kvm_mmu.h> /* - * The LSB of the random hyp VA tag or 0 if no randomization is used. + * The LSB of the HYP VA tag */ static u8 tag_lsb; /* - * The random hyp VA tag value with the region bit if hyp randomization is used + * The HYP VA tag value with the region bit */ static u64 tag_val; static u64 va_mask; +/* + * We want to generate a hyp VA with the following format (with V == + * vabits_actual): + * + * 63 ... V | V-1 | V-2 .. tag_lsb | tag_lsb - 1 .. 0 + * --------------------------------------------------------- + * | 0000000 | hyp_va_msb | random tag | kern linear VA | + * |--------- tag_val -----------|----- va_mask ---| + * + * which does not conflict with the idmap regions. + */ __init void kvm_compute_layout(void) { phys_addr_t idmap_addr = __pa_symbol(__hyp_idmap_text_start); u64 hyp_va_msb; - int kva_msb; /* Where is my RAM region? */ hyp_va_msb = idmap_addr & BIT(vabits_actual - 1); hyp_va_msb ^= BIT(vabits_actual - 1); - kva_msb = fls64((u64)phys_to_virt(memblock_start_of_DRAM()) ^ + tag_lsb = fls64((u64)phys_to_virt(memblock_start_of_DRAM()) ^ (u64)(high_memory - 1)); - if (kva_msb == (vabits_actual - 1)) { - /* - * No space in the address, let's compute the mask so - * that it covers (vabits_actual - 1) bits, and the region - * bit. The tag stays set to zero. - */ - va_mask = BIT(vabits_actual - 1) - 1; - va_mask |= hyp_va_msb; - } else { - /* - * We do have some free bits to insert a random tag. - * Hyp VAs are now created from kernel linear map VAs - * using the following formula (with V == vabits_actual): - * - * 63 ... V | V-1 | V-2 .. tag_lsb | tag_lsb - 1 .. 0 - * --------------------------------------------------------- - * | 0000000 | hyp_va_msb | random tag | kern linear VA | - */ - tag_lsb = kva_msb; - va_mask = GENMASK_ULL(tag_lsb - 1, 0); - tag_val = get_random_long() & GENMASK_ULL(vabits_actual - 2, tag_lsb); - tag_val |= hyp_va_msb; - tag_val >>= tag_lsb; + va_mask = GENMASK_ULL(tag_lsb - 1, 0); + tag_val = hyp_va_msb; + + if (tag_lsb != (vabits_actual - 1)) { + /* We have some free bits to insert a random tag. */ + tag_val |= get_random_long() & GENMASK_ULL(vabits_actual - 2, tag_lsb); } + tag_val >>= tag_lsb; } static u32 compute_instruction(int n, u32 rd, u32 rn) @@ -117,11 +111,11 @@ void __init kvm_update_va_mask(struct alt_instr *alt, * VHE doesn't need any address translation, let's NOP * everything. * - * Alternatively, if we don't have any spare bits in - * the address, NOP everything after masking that - * kernel VA. + * Alternatively, if the tag is zero (because the layout + * dictates it and we don't have any spare bits in the + * address), NOP everything after masking the kernel VA. */ - if (has_vhe() || (!tag_lsb && i > 0)) { + if (has_vhe() || (!tag_val && i > 0)) { updptr[i] = cpu_to_le32(aarch64_insn_gen_nop()); continue; } diff --git a/arch/arm64/lib/Makefile b/arch/arm64/lib/Makefile index c21b936dc01d..2fc253466dbf 100644 --- a/arch/arm64/lib/Makefile +++ b/arch/arm64/lib/Makefile @@ -1,9 +1,9 @@ # SPDX-License-Identifier: GPL-2.0 lib-y := clear_user.o delay.o copy_from_user.o \ copy_to_user.o copy_in_user.o copy_page.o \ - clear_page.o memchr.o memcpy.o memmove.o memset.o \ - memcmp.o strcmp.o strncmp.o strlen.o strnlen.o \ - strchr.o strrchr.o tishift.o + clear_page.o csum.o memchr.o memcpy.o memmove.o \ + memset.o memcmp.o strcmp.o strncmp.o strlen.o \ + strnlen.o strchr.o strrchr.o tishift.o ifeq ($(CONFIG_KERNEL_MODE_NEON), y) obj-$(CONFIG_XOR_BLOCKS) += xor-neon.o diff --git a/arch/arm64/lib/clear_page.S b/arch/arm64/lib/clear_page.S index 78a9ef66288a..073acbf02a7c 100644 --- a/arch/arm64/lib/clear_page.S +++ b/arch/arm64/lib/clear_page.S @@ -14,7 +14,7 @@ * Parameters: * x0 - dest */ -ENTRY(clear_page) +SYM_FUNC_START(clear_page) mrs x1, dczid_el0 and w1, w1, #0xf mov x2, #4 @@ -25,5 +25,5 @@ ENTRY(clear_page) tst x0, #(PAGE_SIZE - 1) b.ne 1b ret -ENDPROC(clear_page) +SYM_FUNC_END(clear_page) EXPORT_SYMBOL(clear_page) diff --git a/arch/arm64/lib/clear_user.S b/arch/arm64/lib/clear_user.S index aeafc03e961a..48a3a26eff66 100644 --- a/arch/arm64/lib/clear_user.S +++ b/arch/arm64/lib/clear_user.S @@ -19,7 +19,7 @@ * * Alignment fixed up by hardware. */ -ENTRY(__arch_clear_user) +SYM_FUNC_START(__arch_clear_user) mov x2, x1 // save the size for fixup return subs x1, x1, #8 b.mi 2f @@ -40,7 +40,7 @@ uao_user_alternative 9f, strh, sttrh, wzr, x0, 2 uao_user_alternative 9f, strb, sttrb, wzr, x0, 0 5: mov x0, #0 ret -ENDPROC(__arch_clear_user) +SYM_FUNC_END(__arch_clear_user) EXPORT_SYMBOL(__arch_clear_user) .section .fixup,"ax" diff --git a/arch/arm64/lib/copy_from_user.S b/arch/arm64/lib/copy_from_user.S index ebb3c06cbb5d..8e25e89ad01f 100644 --- a/arch/arm64/lib/copy_from_user.S +++ b/arch/arm64/lib/copy_from_user.S @@ -53,12 +53,12 @@ .endm end .req x5 -ENTRY(__arch_copy_from_user) +SYM_FUNC_START(__arch_copy_from_user) add end, x0, x2 #include "copy_template.S" mov x0, #0 // Nothing to copy ret -ENDPROC(__arch_copy_from_user) +SYM_FUNC_END(__arch_copy_from_user) EXPORT_SYMBOL(__arch_copy_from_user) .section .fixup,"ax" diff --git a/arch/arm64/lib/copy_in_user.S b/arch/arm64/lib/copy_in_user.S index 3d8153a1ebce..667139013ed1 100644 --- a/arch/arm64/lib/copy_in_user.S +++ b/arch/arm64/lib/copy_in_user.S @@ -55,12 +55,12 @@ end .req x5 -ENTRY(__arch_copy_in_user) +SYM_FUNC_START(__arch_copy_in_user) add end, x0, x2 #include "copy_template.S" mov x0, #0 ret -ENDPROC(__arch_copy_in_user) +SYM_FUNC_END(__arch_copy_in_user) EXPORT_SYMBOL(__arch_copy_in_user) .section .fixup,"ax" diff --git a/arch/arm64/lib/copy_page.S b/arch/arm64/lib/copy_page.S index bbb8562396af..e7a793961408 100644 --- a/arch/arm64/lib/copy_page.S +++ b/arch/arm64/lib/copy_page.S @@ -17,7 +17,7 @@ * x0 - dest * x1 - src */ -ENTRY(copy_page) +SYM_FUNC_START(copy_page) alternative_if ARM64_HAS_NO_HW_PREFETCH // Prefetch three cache lines ahead. prfm pldl1strm, [x1, #128] @@ -34,46 +34,46 @@ alternative_else_nop_endif ldp x14, x15, [x1, #96] ldp x16, x17, [x1, #112] - mov x18, #(PAGE_SIZE - 128) + add x0, x0, #256 add x1, x1, #128 1: - subs x18, x18, #128 + tst x0, #(PAGE_SIZE - 1) alternative_if ARM64_HAS_NO_HW_PREFETCH prfm pldl1strm, [x1, #384] alternative_else_nop_endif - stnp x2, x3, [x0] + stnp x2, x3, [x0, #-256] ldp x2, x3, [x1] - stnp x4, x5, [x0, #16] + stnp x4, x5, [x0, #16 - 256] ldp x4, x5, [x1, #16] - stnp x6, x7, [x0, #32] + stnp x6, x7, [x0, #32 - 256] ldp x6, x7, [x1, #32] - stnp x8, x9, [x0, #48] + stnp x8, x9, [x0, #48 - 256] ldp x8, x9, [x1, #48] - stnp x10, x11, [x0, #64] + stnp x10, x11, [x0, #64 - 256] ldp x10, x11, [x1, #64] - stnp x12, x13, [x0, #80] + stnp x12, x13, [x0, #80 - 256] ldp x12, x13, [x1, #80] - stnp x14, x15, [x0, #96] + stnp x14, x15, [x0, #96 - 256] ldp x14, x15, [x1, #96] - stnp x16, x17, [x0, #112] + stnp x16, x17, [x0, #112 - 256] ldp x16, x17, [x1, #112] add x0, x0, #128 add x1, x1, #128 - b.gt 1b + b.ne 1b - stnp x2, x3, [x0] - stnp x4, x5, [x0, #16] - stnp x6, x7, [x0, #32] - stnp x8, x9, [x0, #48] - stnp x10, x11, [x0, #64] - stnp x12, x13, [x0, #80] - stnp x14, x15, [x0, #96] - stnp x16, x17, [x0, #112] + stnp x2, x3, [x0, #-256] + stnp x4, x5, [x0, #16 - 256] + stnp x6, x7, [x0, #32 - 256] + stnp x8, x9, [x0, #48 - 256] + stnp x10, x11, [x0, #64 - 256] + stnp x12, x13, [x0, #80 - 256] + stnp x14, x15, [x0, #96 - 256] + stnp x16, x17, [x0, #112 - 256] ret -ENDPROC(copy_page) +SYM_FUNC_END(copy_page) EXPORT_SYMBOL(copy_page) diff --git a/arch/arm64/lib/copy_to_user.S b/arch/arm64/lib/copy_to_user.S index 357eae2c18eb..1a104d0089f3 100644 --- a/arch/arm64/lib/copy_to_user.S +++ b/arch/arm64/lib/copy_to_user.S @@ -52,12 +52,12 @@ .endm end .req x5 -ENTRY(__arch_copy_to_user) +SYM_FUNC_START(__arch_copy_to_user) add end, x0, x2 #include "copy_template.S" mov x0, #0 ret -ENDPROC(__arch_copy_to_user) +SYM_FUNC_END(__arch_copy_to_user) EXPORT_SYMBOL(__arch_copy_to_user) .section .fixup,"ax" diff --git a/arch/arm64/lib/crc32.S b/arch/arm64/lib/crc32.S index e6135f16649b..243e107e9896 100644 --- a/arch/arm64/lib/crc32.S +++ b/arch/arm64/lib/crc32.S @@ -85,17 +85,17 @@ CPU_BE( rev16 w3, w3 ) .endm .align 5 -ENTRY(crc32_le) +SYM_FUNC_START(crc32_le) alternative_if_not ARM64_HAS_CRC32 b crc32_le_base alternative_else_nop_endif __crc32 -ENDPROC(crc32_le) +SYM_FUNC_END(crc32_le) .align 5 -ENTRY(__crc32c_le) +SYM_FUNC_START(__crc32c_le) alternative_if_not ARM64_HAS_CRC32 b __crc32c_le_base alternative_else_nop_endif __crc32 c -ENDPROC(__crc32c_le) +SYM_FUNC_END(__crc32c_le) diff --git a/arch/arm64/lib/csum.c b/arch/arm64/lib/csum.c new file mode 100644 index 000000000000..1f82c66b32ea --- /dev/null +++ b/arch/arm64/lib/csum.c @@ -0,0 +1,126 @@ +// SPDX-License-Identifier: GPL-2.0-only +// Copyright (C) 2019-2020 Arm Ltd. + +#include <linux/compiler.h> +#include <linux/kasan-checks.h> +#include <linux/kernel.h> + +#include <net/checksum.h> + +/* Looks dumb, but generates nice-ish code */ +static u64 accumulate(u64 sum, u64 data) +{ + __uint128_t tmp = (__uint128_t)sum + data; + return tmp + (tmp >> 64); +} + +unsigned int do_csum(const unsigned char *buff, int len) +{ + unsigned int offset, shift, sum; + const u64 *ptr; + u64 data, sum64 = 0; + + if (unlikely(len == 0)) + return 0; + + offset = (unsigned long)buff & 7; + /* + * This is to all intents and purposes safe, since rounding down cannot + * result in a different page or cache line being accessed, and @buff + * should absolutely not be pointing to anything read-sensitive. We do, + * however, have to be careful not to piss off KASAN, which means using + * unchecked reads to accommodate the head and tail, for which we'll + * compensate with an explicit check up-front. + */ + kasan_check_read(buff, len); + ptr = (u64 *)(buff - offset); + len = len + offset - 8; + + /* + * Head: zero out any excess leading bytes. Shifting back by the same + * amount should be at least as fast as any other way of handling the + * odd/even alignment, and means we can ignore it until the very end. + */ + shift = offset * 8; + data = READ_ONCE_NOCHECK(*ptr++); +#ifdef __LITTLE_ENDIAN + data = (data >> shift) << shift; +#else + data = (data << shift) >> shift; +#endif + + /* + * Body: straightforward aligned loads from here on (the paired loads + * underlying the quadword type still only need dword alignment). The + * main loop strictly excludes the tail, so the second loop will always + * run at least once. + */ + while (unlikely(len > 64)) { + __uint128_t tmp1, tmp2, tmp3, tmp4; + + tmp1 = READ_ONCE_NOCHECK(*(__uint128_t *)ptr); + tmp2 = READ_ONCE_NOCHECK(*(__uint128_t *)(ptr + 2)); + tmp3 = READ_ONCE_NOCHECK(*(__uint128_t *)(ptr + 4)); + tmp4 = READ_ONCE_NOCHECK(*(__uint128_t *)(ptr + 6)); + + len -= 64; + ptr += 8; + + /* This is the "don't dump the carry flag into a GPR" idiom */ + tmp1 += (tmp1 >> 64) | (tmp1 << 64); + tmp2 += (tmp2 >> 64) | (tmp2 << 64); + tmp3 += (tmp3 >> 64) | (tmp3 << 64); + tmp4 += (tmp4 >> 64) | (tmp4 << 64); + tmp1 = ((tmp1 >> 64) << 64) | (tmp2 >> 64); + tmp1 += (tmp1 >> 64) | (tmp1 << 64); + tmp3 = ((tmp3 >> 64) << 64) | (tmp4 >> 64); + tmp3 += (tmp3 >> 64) | (tmp3 << 64); + tmp1 = ((tmp1 >> 64) << 64) | (tmp3 >> 64); + tmp1 += (tmp1 >> 64) | (tmp1 << 64); + tmp1 = ((tmp1 >> 64) << 64) | sum64; + tmp1 += (tmp1 >> 64) | (tmp1 << 64); + sum64 = tmp1 >> 64; + } + while (len > 8) { + __uint128_t tmp; + + sum64 = accumulate(sum64, data); + tmp = READ_ONCE_NOCHECK(*(__uint128_t *)ptr); + + len -= 16; + ptr += 2; + +#ifdef __LITTLE_ENDIAN + data = tmp >> 64; + sum64 = accumulate(sum64, tmp); +#else + data = tmp; + sum64 = accumulate(sum64, tmp >> 64); +#endif + } + if (len > 0) { + sum64 = accumulate(sum64, data); + data = READ_ONCE_NOCHECK(*ptr); + len -= 8; + } + /* + * Tail: zero any over-read bytes similarly to the head, again + * preserving odd/even alignment. + */ + shift = len * -8; +#ifdef __LITTLE_ENDIAN + data = (data << shift) >> shift; +#else + data = (data >> shift) << shift; +#endif + sum64 = accumulate(sum64, data); + + /* Finally, folding */ + sum64 += (sum64 >> 32) | (sum64 << 32); + sum = sum64 >> 32; + sum += (sum >> 16) | (sum << 16); + if (offset & 1) + return (u16)swab32(sum); + + return sum >> 16; +} diff --git a/arch/arm64/lib/memchr.S b/arch/arm64/lib/memchr.S index 48a3ab636e4f..edf6b970a277 100644 --- a/arch/arm64/lib/memchr.S +++ b/arch/arm64/lib/memchr.S @@ -19,7 +19,7 @@ * Returns: * x0 - address of first occurrence of 'c' or 0 */ -WEAK(memchr) +SYM_FUNC_START_WEAK_PI(memchr) and w1, w1, #0xff 1: subs x2, x2, #1 b.mi 2f @@ -30,5 +30,5 @@ WEAK(memchr) ret 2: mov x0, #0 ret -ENDPIPROC(memchr) +SYM_FUNC_END_PI(memchr) EXPORT_SYMBOL_NOKASAN(memchr) diff --git a/arch/arm64/lib/memcmp.S b/arch/arm64/lib/memcmp.S index b297bdaaf549..c0671e793ea9 100644 --- a/arch/arm64/lib/memcmp.S +++ b/arch/arm64/lib/memcmp.S @@ -46,7 +46,7 @@ pos .req x11 limit_wd .req x12 mask .req x13 -WEAK(memcmp) +SYM_FUNC_START_WEAK_PI(memcmp) cbz limit, .Lret0 eor tmp1, src1, src2 tst tmp1, #7 @@ -243,5 +243,5 @@ CPU_LE( rev data2, data2 ) .Lret0: mov result, #0 ret -ENDPIPROC(memcmp) +SYM_FUNC_END_PI(memcmp) EXPORT_SYMBOL_NOKASAN(memcmp) diff --git a/arch/arm64/lib/memcpy.S b/arch/arm64/lib/memcpy.S index d79f48994dbb..9f382adfa88a 100644 --- a/arch/arm64/lib/memcpy.S +++ b/arch/arm64/lib/memcpy.S @@ -57,11 +57,11 @@ .endm .weak memcpy -ENTRY(__memcpy) -ENTRY(memcpy) +SYM_FUNC_START_ALIAS(__memcpy) +SYM_FUNC_START_PI(memcpy) #include "copy_template.S" ret -ENDPIPROC(memcpy) +SYM_FUNC_END_PI(memcpy) EXPORT_SYMBOL(memcpy) -ENDPROC(__memcpy) +SYM_FUNC_END_ALIAS(__memcpy) EXPORT_SYMBOL(__memcpy) diff --git a/arch/arm64/lib/memmove.S b/arch/arm64/lib/memmove.S index 784775136480..02cda2e33bde 100644 --- a/arch/arm64/lib/memmove.S +++ b/arch/arm64/lib/memmove.S @@ -46,8 +46,8 @@ D_l .req x13 D_h .req x14 .weak memmove -ENTRY(__memmove) -ENTRY(memmove) +SYM_FUNC_START_ALIAS(__memmove) +SYM_FUNC_START_PI(memmove) cmp dstin, src b.lo __memcpy add tmp1, src, count @@ -184,7 +184,7 @@ ENTRY(memmove) tst count, #0x3f b.ne .Ltail63 ret -ENDPIPROC(memmove) +SYM_FUNC_END_PI(memmove) EXPORT_SYMBOL(memmove) -ENDPROC(__memmove) +SYM_FUNC_END_ALIAS(__memmove) EXPORT_SYMBOL(__memmove) diff --git a/arch/arm64/lib/memset.S b/arch/arm64/lib/memset.S index 9fb97e6bc560..77c3c7ba0084 100644 --- a/arch/arm64/lib/memset.S +++ b/arch/arm64/lib/memset.S @@ -43,8 +43,8 @@ tmp3w .req w9 tmp3 .req x9 .weak memset -ENTRY(__memset) -ENTRY(memset) +SYM_FUNC_START_ALIAS(__memset) +SYM_FUNC_START_PI(memset) mov dst, dstin /* Preserve return value. */ and A_lw, val, #255 orr A_lw, A_lw, A_lw, lsl #8 @@ -203,7 +203,7 @@ ENTRY(memset) ands count, count, zva_bits_x b.ne .Ltail_maybe_long ret -ENDPIPROC(memset) +SYM_FUNC_END_PI(memset) EXPORT_SYMBOL(memset) -ENDPROC(__memset) +SYM_FUNC_END_ALIAS(__memset) EXPORT_SYMBOL(__memset) diff --git a/arch/arm64/lib/strchr.S b/arch/arm64/lib/strchr.S index ca3ec18171a4..1f47eae3b0d6 100644 --- a/arch/arm64/lib/strchr.S +++ b/arch/arm64/lib/strchr.S @@ -18,7 +18,7 @@ * Returns: * x0 - address of first occurrence of 'c' or 0 */ -WEAK(strchr) +SYM_FUNC_START_WEAK(strchr) and w1, w1, #0xff 1: ldrb w2, [x0], #1 cmp w2, w1 @@ -28,5 +28,5 @@ WEAK(strchr) cmp w2, w1 csel x0, x0, xzr, eq ret -ENDPROC(strchr) +SYM_FUNC_END(strchr) EXPORT_SYMBOL_NOKASAN(strchr) diff --git a/arch/arm64/lib/strcmp.S b/arch/arm64/lib/strcmp.S index e9aefbe0b740..4767540d1b94 100644 --- a/arch/arm64/lib/strcmp.S +++ b/arch/arm64/lib/strcmp.S @@ -48,7 +48,7 @@ tmp3 .req x9 zeroones .req x10 pos .req x11 -WEAK(strcmp) +SYM_FUNC_START_WEAK_PI(strcmp) eor tmp1, src1, src2 mov zeroones, #REP8_01 tst tmp1, #7 @@ -219,5 +219,5 @@ CPU_BE( orr syndrome, diff, has_nul ) lsr data1, data1, #56 sub result, data1, data2, lsr #56 ret -ENDPIPROC(strcmp) +SYM_FUNC_END_PI(strcmp) EXPORT_SYMBOL_NOKASAN(strcmp) diff --git a/arch/arm64/lib/strlen.S b/arch/arm64/lib/strlen.S index 87b0cb066915..ee3ed882dd79 100644 --- a/arch/arm64/lib/strlen.S +++ b/arch/arm64/lib/strlen.S @@ -44,7 +44,7 @@ pos .req x12 #define REP8_7f 0x7f7f7f7f7f7f7f7f #define REP8_80 0x8080808080808080 -WEAK(strlen) +SYM_FUNC_START_WEAK_PI(strlen) mov zeroones, #REP8_01 bic src, srcin, #15 ands tmp1, srcin, #15 @@ -111,5 +111,5 @@ CPU_LE( lsr tmp2, tmp2, tmp1 ) /* Shift (tmp1 & 63). */ csinv data1, data1, xzr, le csel data2, data2, data2a, le b .Lrealigned -ENDPIPROC(strlen) +SYM_FUNC_END_PI(strlen) EXPORT_SYMBOL_NOKASAN(strlen) diff --git a/arch/arm64/lib/strncmp.S b/arch/arm64/lib/strncmp.S index f571581888fa..2a7ee949ed47 100644 --- a/arch/arm64/lib/strncmp.S +++ b/arch/arm64/lib/strncmp.S @@ -52,7 +52,7 @@ limit_wd .req x13 mask .req x14 endloop .req x15 -WEAK(strncmp) +SYM_FUNC_START_WEAK_PI(strncmp) cbz limit, .Lret0 eor tmp1, src1, src2 mov zeroones, #REP8_01 @@ -295,5 +295,5 @@ CPU_BE( orr syndrome, diff, has_nul ) .Lret0: mov result, #0 ret -ENDPIPROC(strncmp) +SYM_FUNC_END_PI(strncmp) EXPORT_SYMBOL_NOKASAN(strncmp) diff --git a/arch/arm64/lib/strnlen.S b/arch/arm64/lib/strnlen.S index c0bac9493c68..b72913a99038 100644 --- a/arch/arm64/lib/strnlen.S +++ b/arch/arm64/lib/strnlen.S @@ -47,7 +47,7 @@ limit_wd .req x14 #define REP8_7f 0x7f7f7f7f7f7f7f7f #define REP8_80 0x8080808080808080 -WEAK(strnlen) +SYM_FUNC_START_WEAK_PI(strnlen) cbz limit, .Lhit_limit mov zeroones, #REP8_01 bic src, srcin, #15 @@ -156,5 +156,5 @@ CPU_LE( lsr tmp2, tmp2, tmp4 ) /* Shift (tmp1 & 63). */ .Lhit_limit: mov len, limit ret -ENDPIPROC(strnlen) +SYM_FUNC_END_PI(strnlen) EXPORT_SYMBOL_NOKASAN(strnlen) diff --git a/arch/arm64/lib/strrchr.S b/arch/arm64/lib/strrchr.S index 794ac49ea433..13132d1ed6d1 100644 --- a/arch/arm64/lib/strrchr.S +++ b/arch/arm64/lib/strrchr.S @@ -18,7 +18,7 @@ * Returns: * x0 - address of last occurrence of 'c' or 0 */ -WEAK(strrchr) +SYM_FUNC_START_WEAK_PI(strrchr) mov x3, #0 and w1, w1, #0xff 1: ldrb w2, [x0], #1 @@ -29,5 +29,5 @@ WEAK(strrchr) b 1b 2: mov x0, x3 ret -ENDPIPROC(strrchr) +SYM_FUNC_END_PI(strrchr) EXPORT_SYMBOL_NOKASAN(strrchr) diff --git a/arch/arm64/lib/tishift.S b/arch/arm64/lib/tishift.S index 047622536535..a88613834fb0 100644 --- a/arch/arm64/lib/tishift.S +++ b/arch/arm64/lib/tishift.S @@ -7,7 +7,7 @@ #include <asm/assembler.h> -ENTRY(__ashlti3) +SYM_FUNC_START(__ashlti3) cbz x2, 1f mov x3, #64 sub x3, x3, x2 @@ -26,10 +26,10 @@ ENTRY(__ashlti3) lsl x1, x0, x1 mov x0, x2 ret -ENDPROC(__ashlti3) +SYM_FUNC_END(__ashlti3) EXPORT_SYMBOL(__ashlti3) -ENTRY(__ashrti3) +SYM_FUNC_START(__ashrti3) cbz x2, 1f mov x3, #64 sub x3, x3, x2 @@ -48,10 +48,10 @@ ENTRY(__ashrti3) asr x0, x1, x0 mov x1, x2 ret -ENDPROC(__ashrti3) +SYM_FUNC_END(__ashrti3) EXPORT_SYMBOL(__ashrti3) -ENTRY(__lshrti3) +SYM_FUNC_START(__lshrti3) cbz x2, 1f mov x3, #64 sub x3, x3, x2 @@ -70,5 +70,5 @@ ENTRY(__lshrti3) lsr x0, x1, x0 mov x1, x2 ret -ENDPROC(__lshrti3) +SYM_FUNC_END(__lshrti3) EXPORT_SYMBOL(__lshrti3) diff --git a/arch/arm64/mm/Makefile b/arch/arm64/mm/Makefile index 849c1df3d214..d91030f0ffee 100644 --- a/arch/arm64/mm/Makefile +++ b/arch/arm64/mm/Makefile @@ -4,8 +4,8 @@ obj-y := dma-mapping.o extable.o fault.o init.o \ ioremap.o mmap.o pgd.o mmu.o \ context.o proc.o pageattr.o obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o -obj-$(CONFIG_ARM64_PTDUMP_CORE) += dump.o -obj-$(CONFIG_ARM64_PTDUMP_DEBUGFS) += ptdump_debugfs.o +obj-$(CONFIG_PTDUMP_CORE) += dump.o +obj-$(CONFIG_PTDUMP_DEBUGFS) += ptdump_debugfs.o obj-$(CONFIG_NUMA) += numa.o obj-$(CONFIG_DEBUG_VIRTUAL) += physaddr.o KASAN_SANITIZE_physaddr.o += n diff --git a/arch/arm64/mm/cache.S b/arch/arm64/mm/cache.S index db767b072601..2d881f34dd9d 100644 --- a/arch/arm64/mm/cache.S +++ b/arch/arm64/mm/cache.S @@ -24,7 +24,7 @@ * - start - virtual start address of region * - end - virtual end address of region */ -ENTRY(__flush_icache_range) +SYM_FUNC_START(__flush_icache_range) /* FALLTHROUGH */ /* @@ -37,7 +37,7 @@ ENTRY(__flush_icache_range) * - start - virtual start address of region * - end - virtual end address of region */ -ENTRY(__flush_cache_user_range) +SYM_FUNC_START(__flush_cache_user_range) uaccess_ttbr0_enable x2, x3, x4 alternative_if ARM64_HAS_CACHE_IDC dsb ishst @@ -66,8 +66,8 @@ alternative_else_nop_endif 9: mov x0, #-EFAULT b 1b -ENDPROC(__flush_icache_range) -ENDPROC(__flush_cache_user_range) +SYM_FUNC_END(__flush_icache_range) +SYM_FUNC_END(__flush_cache_user_range) /* * invalidate_icache_range(start,end) @@ -77,7 +77,7 @@ ENDPROC(__flush_cache_user_range) * - start - virtual start address of region * - end - virtual end address of region */ -ENTRY(invalidate_icache_range) +SYM_FUNC_START(invalidate_icache_range) alternative_if ARM64_HAS_CACHE_DIC mov x0, xzr isb @@ -94,7 +94,7 @@ alternative_else_nop_endif 2: mov x0, #-EFAULT b 1b -ENDPROC(invalidate_icache_range) +SYM_FUNC_END(invalidate_icache_range) /* * __flush_dcache_area(kaddr, size) @@ -105,10 +105,10 @@ ENDPROC(invalidate_icache_range) * - kaddr - kernel address * - size - size in question */ -ENTRY(__flush_dcache_area) +SYM_FUNC_START_PI(__flush_dcache_area) dcache_by_line_op civac, sy, x0, x1, x2, x3 ret -ENDPIPROC(__flush_dcache_area) +SYM_FUNC_END_PI(__flush_dcache_area) /* * __clean_dcache_area_pou(kaddr, size) @@ -119,14 +119,14 @@ ENDPIPROC(__flush_dcache_area) * - kaddr - kernel address * - size - size in question */ -ENTRY(__clean_dcache_area_pou) +SYM_FUNC_START(__clean_dcache_area_pou) alternative_if ARM64_HAS_CACHE_IDC dsb ishst ret alternative_else_nop_endif dcache_by_line_op cvau, ish, x0, x1, x2, x3 ret -ENDPROC(__clean_dcache_area_pou) +SYM_FUNC_END(__clean_dcache_area_pou) /* * __inval_dcache_area(kaddr, size) @@ -138,7 +138,8 @@ ENDPROC(__clean_dcache_area_pou) * - kaddr - kernel address * - size - size in question */ -ENTRY(__inval_dcache_area) +SYM_FUNC_START_LOCAL(__dma_inv_area) +SYM_FUNC_START_PI(__inval_dcache_area) /* FALLTHROUGH */ /* @@ -146,7 +147,6 @@ ENTRY(__inval_dcache_area) * - start - virtual start address of region * - size - size in question */ -__dma_inv_area: add x1, x1, x0 dcache_line_size x2, x3 sub x3, x2, #1 @@ -165,8 +165,8 @@ __dma_inv_area: b.lo 2b dsb sy ret -ENDPIPROC(__inval_dcache_area) -ENDPROC(__dma_inv_area) +SYM_FUNC_END_PI(__inval_dcache_area) +SYM_FUNC_END(__dma_inv_area) /* * __clean_dcache_area_poc(kaddr, size) @@ -177,7 +177,8 @@ ENDPROC(__dma_inv_area) * - kaddr - kernel address * - size - size in question */ -ENTRY(__clean_dcache_area_poc) +SYM_FUNC_START_LOCAL(__dma_clean_area) +SYM_FUNC_START_PI(__clean_dcache_area_poc) /* FALLTHROUGH */ /* @@ -185,11 +186,10 @@ ENTRY(__clean_dcache_area_poc) * - start - virtual start address of region * - size - size in question */ -__dma_clean_area: dcache_by_line_op cvac, sy, x0, x1, x2, x3 ret -ENDPIPROC(__clean_dcache_area_poc) -ENDPROC(__dma_clean_area) +SYM_FUNC_END_PI(__clean_dcache_area_poc) +SYM_FUNC_END(__dma_clean_area) /* * __clean_dcache_area_pop(kaddr, size) @@ -200,13 +200,13 @@ ENDPROC(__dma_clean_area) * - kaddr - kernel address * - size - size in question */ -ENTRY(__clean_dcache_area_pop) +SYM_FUNC_START_PI(__clean_dcache_area_pop) alternative_if_not ARM64_HAS_DCPOP b __clean_dcache_area_poc alternative_else_nop_endif dcache_by_line_op cvap, sy, x0, x1, x2, x3 ret -ENDPIPROC(__clean_dcache_area_pop) +SYM_FUNC_END_PI(__clean_dcache_area_pop) /* * __dma_flush_area(start, size) @@ -216,10 +216,10 @@ ENDPIPROC(__clean_dcache_area_pop) * - start - virtual start address of region * - size - size in question */ -ENTRY(__dma_flush_area) +SYM_FUNC_START_PI(__dma_flush_area) dcache_by_line_op civac, sy, x0, x1, x2, x3 ret -ENDPIPROC(__dma_flush_area) +SYM_FUNC_END_PI(__dma_flush_area) /* * __dma_map_area(start, size, dir) @@ -227,11 +227,11 @@ ENDPIPROC(__dma_flush_area) * - size - size of region * - dir - DMA direction */ -ENTRY(__dma_map_area) +SYM_FUNC_START_PI(__dma_map_area) cmp w2, #DMA_FROM_DEVICE b.eq __dma_inv_area b __dma_clean_area -ENDPIPROC(__dma_map_area) +SYM_FUNC_END_PI(__dma_map_area) /* * __dma_unmap_area(start, size, dir) @@ -239,8 +239,8 @@ ENDPIPROC(__dma_map_area) * - size - size of region * - dir - DMA direction */ -ENTRY(__dma_unmap_area) +SYM_FUNC_START_PI(__dma_unmap_area) cmp w2, #DMA_TO_DEVICE b.ne __dma_inv_area ret -ENDPIPROC(__dma_unmap_area) +SYM_FUNC_END_PI(__dma_unmap_area) diff --git a/arch/arm64/mm/context.c b/arch/arm64/mm/context.c index b5e329fde2dd..8ef73e89d514 100644 --- a/arch/arm64/mm/context.c +++ b/arch/arm64/mm/context.c @@ -29,15 +29,9 @@ static cpumask_t tlb_flush_pending; #define ASID_MASK (~GENMASK(asid_bits - 1, 0)) #define ASID_FIRST_VERSION (1UL << asid_bits) -#ifdef CONFIG_UNMAP_KERNEL_AT_EL0 -#define NUM_USER_ASIDS (ASID_FIRST_VERSION >> 1) -#define asid2idx(asid) (((asid) & ~ASID_MASK) >> 1) -#define idx2asid(idx) (((idx) << 1) & ~ASID_MASK) -#else -#define NUM_USER_ASIDS (ASID_FIRST_VERSION) +#define NUM_USER_ASIDS ASID_FIRST_VERSION #define asid2idx(asid) ((asid) & ~ASID_MASK) #define idx2asid(idx) asid2idx(idx) -#endif /* Get the ASIDBits supported by the current CPU */ static u32 get_cpu_asid_bits(void) @@ -77,13 +71,33 @@ void verify_cpu_asid_bits(void) } } +static void set_kpti_asid_bits(void) +{ + unsigned int len = BITS_TO_LONGS(NUM_USER_ASIDS) * sizeof(unsigned long); + /* + * In case of KPTI kernel/user ASIDs are allocated in + * pairs, the bottom bit distinguishes the two: if it + * is set, then the ASID will map only userspace. Thus + * mark even as reserved for kernel. + */ + memset(asid_map, 0xaa, len); +} + +static void set_reserved_asid_bits(void) +{ + if (arm64_kernel_unmapped_at_el0()) + set_kpti_asid_bits(); + else + bitmap_clear(asid_map, 0, NUM_USER_ASIDS); +} + static void flush_context(void) { int i; u64 asid; /* Update the list of reserved ASIDs and the ASID bitmap. */ - bitmap_clear(asid_map, 0, NUM_USER_ASIDS); + set_reserved_asid_bits(); for_each_possible_cpu(i) { asid = atomic64_xchg_relaxed(&per_cpu(active_asids, i), 0); @@ -261,6 +275,14 @@ static int asids_init(void) panic("Failed to allocate bitmap for %lu ASIDs\n", NUM_USER_ASIDS); + /* + * We cannot call set_reserved_asid_bits() here because CPU + * caps are not finalized yet, so it is safer to assume KPTI + * and reserve kernel ASID's from beginning. + */ + if (IS_ENABLED(CONFIG_UNMAP_KERNEL_AT_EL0)) + set_kpti_asid_bits(); + pr_info("ASID allocator initialised with %lu entries\n", NUM_USER_ASIDS); return 0; } diff --git a/arch/arm64/mm/dump.c b/arch/arm64/mm/dump.c index 0a920b538a89..860c00ec8bd3 100644 --- a/arch/arm64/mm/dump.c +++ b/arch/arm64/mm/dump.c @@ -15,6 +15,7 @@ #include <linux/io.h> #include <linux/init.h> #include <linux/mm.h> +#include <linux/ptdump.h> #include <linux/sched.h> #include <linux/seq_file.h> @@ -75,10 +76,11 @@ static struct addr_marker address_markers[] = { * dumps out a description of the range. */ struct pg_state { + struct ptdump_state ptdump; struct seq_file *seq; const struct addr_marker *marker; unsigned long start_address; - unsigned level; + int level; u64 current_prot; bool check_wx; unsigned long wx_pages; @@ -174,11 +176,14 @@ struct pg_level { }; static struct pg_level pg_level[] = { - { - }, { /* pgd */ + { /* pgd */ .name = "PGD", .bits = pte_bits, .num = ARRAY_SIZE(pte_bits), + }, { /* p4d */ + .name = "P4D", + .bits = pte_bits, + .num = ARRAY_SIZE(pte_bits), }, { /* pud */ .name = (CONFIG_PGTABLE_LEVELS > 3) ? "PUD" : "PGD", .bits = pte_bits, @@ -241,13 +246,17 @@ static void note_prot_wx(struct pg_state *st, unsigned long addr) st->wx_pages += (addr - st->start_address) / PAGE_SIZE; } -static void note_page(struct pg_state *st, unsigned long addr, unsigned level, - u64 val) +static void note_page(struct ptdump_state *pt_st, unsigned long addr, int level, + unsigned long val) { + struct pg_state *st = container_of(pt_st, struct pg_state, ptdump); static const char units[] = "KMGTPE"; - u64 prot = val & pg_level[level].mask; + u64 prot = 0; + + if (level >= 0) + prot = val & pg_level[level].mask; - if (!st->level) { + if (st->level == -1) { st->level = level; st->current_prot = prot; st->start_address = addr; @@ -260,21 +269,22 @@ static void note_page(struct pg_state *st, unsigned long addr, unsigned level, if (st->current_prot) { note_prot_uxn(st, addr); note_prot_wx(st, addr); - pt_dump_seq_printf(st->seq, "0x%016lx-0x%016lx ", + } + + pt_dump_seq_printf(st->seq, "0x%016lx-0x%016lx ", st->start_address, addr); - delta = (addr - st->start_address) >> 10; - while (!(delta & 1023) && unit[1]) { - delta >>= 10; - unit++; - } - pt_dump_seq_printf(st->seq, "%9lu%c %s", delta, *unit, - pg_level[st->level].name); - if (pg_level[st->level].bits) - dump_prot(st, pg_level[st->level].bits, - pg_level[st->level].num); - pt_dump_seq_puts(st->seq, "\n"); + delta = (addr - st->start_address) >> 10; + while (!(delta & 1023) && unit[1]) { + delta >>= 10; + unit++; } + pt_dump_seq_printf(st->seq, "%9lu%c %s", delta, *unit, + pg_level[st->level].name); + if (st->current_prot && pg_level[st->level].bits) + dump_prot(st, pg_level[st->level].bits, + pg_level[st->level].num); + pt_dump_seq_puts(st->seq, "\n"); if (addr >= st->marker[1].start_address) { st->marker++; @@ -293,85 +303,27 @@ static void note_page(struct pg_state *st, unsigned long addr, unsigned level, } -static void walk_pte(struct pg_state *st, pmd_t *pmdp, unsigned long start, - unsigned long end) -{ - unsigned long addr = start; - pte_t *ptep = pte_offset_kernel(pmdp, start); - - do { - note_page(st, addr, 4, READ_ONCE(pte_val(*ptep))); - } while (ptep++, addr += PAGE_SIZE, addr != end); -} - -static void walk_pmd(struct pg_state *st, pud_t *pudp, unsigned long start, - unsigned long end) -{ - unsigned long next, addr = start; - pmd_t *pmdp = pmd_offset(pudp, start); - - do { - pmd_t pmd = READ_ONCE(*pmdp); - next = pmd_addr_end(addr, end); - - if (pmd_none(pmd) || pmd_sect(pmd)) { - note_page(st, addr, 3, pmd_val(pmd)); - } else { - BUG_ON(pmd_bad(pmd)); - walk_pte(st, pmdp, addr, next); - } - } while (pmdp++, addr = next, addr != end); -} - -static void walk_pud(struct pg_state *st, pgd_t *pgdp, unsigned long start, - unsigned long end) +void ptdump_walk(struct seq_file *s, struct ptdump_info *info) { - unsigned long next, addr = start; - pud_t *pudp = pud_offset(pgdp, start); - - do { - pud_t pud = READ_ONCE(*pudp); - next = pud_addr_end(addr, end); - - if (pud_none(pud) || pud_sect(pud)) { - note_page(st, addr, 2, pud_val(pud)); - } else { - BUG_ON(pud_bad(pud)); - walk_pmd(st, pudp, addr, next); - } - } while (pudp++, addr = next, addr != end); -} + unsigned long end = ~0UL; + struct pg_state st; -static void walk_pgd(struct pg_state *st, struct mm_struct *mm, - unsigned long start) -{ - unsigned long end = (start < TASK_SIZE_64) ? TASK_SIZE_64 : 0; - unsigned long next, addr = start; - pgd_t *pgdp = pgd_offset(mm, start); - - do { - pgd_t pgd = READ_ONCE(*pgdp); - next = pgd_addr_end(addr, end); - - if (pgd_none(pgd)) { - note_page(st, addr, 1, pgd_val(pgd)); - } else { - BUG_ON(pgd_bad(pgd)); - walk_pud(st, pgdp, addr, next); - } - } while (pgdp++, addr = next, addr != end); -} + if (info->base_addr < TASK_SIZE_64) + end = TASK_SIZE_64; -void ptdump_walk_pgd(struct seq_file *m, struct ptdump_info *info) -{ - struct pg_state st = { - .seq = m, + st = (struct pg_state){ + .seq = s, .marker = info->markers, + .ptdump = { + .note_page = note_page, + .range = (struct ptdump_range[]){ + {info->base_addr, end}, + {0, 0} + } + } }; - walk_pgd(&st, info->mm, info->base_addr); - - note_page(&st, 0, 0, 0); + ptdump_walk_pgd(&st.ptdump, info->mm, NULL); } static void ptdump_initialize(void) @@ -398,11 +350,19 @@ void ptdump_check_wx(void) { 0, NULL}, { -1, NULL}, }, + .level = -1, .check_wx = true, + .ptdump = { + .note_page = note_page, + .range = (struct ptdump_range[]) { + {PAGE_OFFSET, ~0UL}, + {0, 0} + } + } }; - walk_pgd(&st, &init_mm, PAGE_OFFSET); - note_page(&st, 0, 0, 0); + ptdump_walk_pgd(&st.ptdump, &init_mm, NULL); + if (st.wx_pages || st.uxn_pages) pr_warn("Checked W+X mappings: FAILED, %lu W+X pages found, %lu non-UXN pages found\n", st.wx_pages, st.uxn_pages); diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c index 077b02a2d4d3..85566d32958f 100644 --- a/arch/arm64/mm/fault.c +++ b/arch/arm64/mm/fault.c @@ -445,7 +445,7 @@ static int __kprobes do_page_fault(unsigned long addr, unsigned int esr, const struct fault_info *inf; struct mm_struct *mm = current->mm; vm_fault_t fault, major = 0; - unsigned long vm_flags = VM_READ | VM_WRITE; + unsigned long vm_flags = VM_READ | VM_WRITE | VM_EXEC; unsigned int mm_flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE; if (kprobe_page_fault(regs, esr)) diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c index 5a3b15a14a7f..128f70852bf3 100644 --- a/arch/arm64/mm/mmu.c +++ b/arch/arm64/mm/mmu.c @@ -943,13 +943,13 @@ int __init arch_ioremap_pud_supported(void) * SW table walks can't handle removal of intermediate entries. */ return IS_ENABLED(CONFIG_ARM64_4K_PAGES) && - !IS_ENABLED(CONFIG_ARM64_PTDUMP_DEBUGFS); + !IS_ENABLED(CONFIG_PTDUMP_DEBUGFS); } int __init arch_ioremap_pmd_supported(void) { /* See arch_ioremap_pud_supported() */ - return !IS_ENABLED(CONFIG_ARM64_PTDUMP_DEBUGFS); + return !IS_ENABLED(CONFIG_PTDUMP_DEBUGFS); } int pud_set_huge(pud_t *pudp, phys_addr_t phys, pgprot_t prot) @@ -1070,7 +1070,6 @@ void arch_remove_memory(int nid, u64 start, u64 size, { unsigned long start_pfn = start >> PAGE_SHIFT; unsigned long nr_pages = size >> PAGE_SHIFT; - struct zone *zone; /* * FIXME: Cleanup page tables (also in arch_add_memory() in case @@ -1079,7 +1078,6 @@ void arch_remove_memory(int nid, u64 start, u64 size, * unplug. ARCH_ENABLE_MEMORY_HOTREMOVE must not be * unlocked yet. */ - zone = page_zone(pfn_to_page(start_pfn)); - __remove_pages(zone, start_pfn, nr_pages, altmap); + __remove_pages(start_pfn, nr_pages, altmap); } #endif diff --git a/arch/arm64/mm/pageattr.c b/arch/arm64/mm/pageattr.c index 9ce7bd9d4d9c..250c49008d73 100644 --- a/arch/arm64/mm/pageattr.c +++ b/arch/arm64/mm/pageattr.c @@ -54,7 +54,7 @@ static int change_memory_common(unsigned long addr, int numpages, pgprot_t set_mask, pgprot_t clear_mask) { unsigned long start = addr; - unsigned long size = PAGE_SIZE*numpages; + unsigned long size = PAGE_SIZE * numpages; unsigned long end = start + size; struct vm_struct *area; int i; diff --git a/arch/arm64/mm/proc.S b/arch/arm64/mm/proc.S index a1e0592d1fbc..aafed6902411 100644 --- a/arch/arm64/mm/proc.S +++ b/arch/arm64/mm/proc.S @@ -42,7 +42,14 @@ #define TCR_KASAN_FLAGS 0 #endif -#define MAIR(attr, mt) ((attr) << ((mt) * 8)) +/* Default MAIR_EL1 */ +#define MAIR_EL1_SET \ + (MAIR_ATTRIDX(MAIR_ATTR_DEVICE_nGnRnE, MT_DEVICE_nGnRnE) | \ + MAIR_ATTRIDX(MAIR_ATTR_DEVICE_nGnRE, MT_DEVICE_nGnRE) | \ + MAIR_ATTRIDX(MAIR_ATTR_DEVICE_GRE, MT_DEVICE_GRE) | \ + MAIR_ATTRIDX(MAIR_ATTR_NORMAL_NC, MT_NORMAL_NC) | \ + MAIR_ATTRIDX(MAIR_ATTR_NORMAL, MT_NORMAL) | \ + MAIR_ATTRIDX(MAIR_ATTR_NORMAL_WT, MT_NORMAL_WT)) #ifdef CONFIG_CPU_PM /** @@ -50,7 +57,7 @@ * * x0: virtual address of context pointer */ -ENTRY(cpu_do_suspend) +SYM_FUNC_START(cpu_do_suspend) mrs x2, tpidr_el0 mrs x3, tpidrro_el0 mrs x4, contextidr_el1 @@ -74,7 +81,7 @@ alternative_endif stp x10, x11, [x0, #64] stp x12, x13, [x0, #80] ret -ENDPROC(cpu_do_suspend) +SYM_FUNC_END(cpu_do_suspend) /** * cpu_do_resume - restore CPU register context @@ -82,7 +89,7 @@ ENDPROC(cpu_do_suspend) * x0: Address of context pointer */ .pushsection ".idmap.text", "awx" -ENTRY(cpu_do_resume) +SYM_FUNC_START(cpu_do_resume) ldp x2, x3, [x0] ldp x4, x5, [x0, #16] ldp x6, x8, [x0, #32] @@ -131,7 +138,7 @@ alternative_else_nop_endif isb ret -ENDPROC(cpu_do_resume) +SYM_FUNC_END(cpu_do_resume) .popsection #endif @@ -142,7 +149,7 @@ ENDPROC(cpu_do_resume) * * - pgd_phys - physical address of new TTB */ -ENTRY(cpu_do_switch_mm) +SYM_FUNC_START(cpu_do_switch_mm) mrs x2, ttbr1_el1 mmid x1, x1 // get mm->context.id phys_to_ttbr x3, x0 @@ -161,7 +168,7 @@ alternative_else_nop_endif msr ttbr0_el1, x3 // now update TTBR0 isb b post_ttbr_update_workaround // Back to C code... -ENDPROC(cpu_do_switch_mm) +SYM_FUNC_END(cpu_do_switch_mm) .pushsection ".idmap.text", "awx" @@ -182,7 +189,7 @@ ENDPROC(cpu_do_switch_mm) * This is the low-level counterpart to cpu_replace_ttbr1, and should not be * called by anything else. It can only be executed from a TTBR0 mapping. */ -ENTRY(idmap_cpu_replace_ttbr1) +SYM_FUNC_START(idmap_cpu_replace_ttbr1) save_and_disable_daif flags=x2 __idmap_cpu_set_reserved_ttbr1 x1, x3 @@ -194,7 +201,7 @@ ENTRY(idmap_cpu_replace_ttbr1) restore_daif x2 ret -ENDPROC(idmap_cpu_replace_ttbr1) +SYM_FUNC_END(idmap_cpu_replace_ttbr1) .popsection #ifdef CONFIG_UNMAP_KERNEL_AT_EL0 @@ -222,7 +229,7 @@ ENDPROC(idmap_cpu_replace_ttbr1) */ __idmap_kpti_flag: .long 1 -ENTRY(idmap_kpti_install_ng_mappings) +SYM_FUNC_START(idmap_kpti_install_ng_mappings) cpu .req w0 num_cpus .req w1 swapper_pa .req x2 @@ -250,15 +257,15 @@ ENTRY(idmap_kpti_install_ng_mappings) /* We're the boot CPU. Wait for the others to catch up */ sevl 1: wfe - ldaxr w18, [flag_ptr] - eor w18, w18, num_cpus - cbnz w18, 1b + ldaxr w17, [flag_ptr] + eor w17, w17, num_cpus + cbnz w17, 1b /* We need to walk swapper, so turn off the MMU. */ pre_disable_mmu_workaround - mrs x18, sctlr_el1 - bic x18, x18, #SCTLR_ELx_M - msr sctlr_el1, x18 + mrs x17, sctlr_el1 + bic x17, x17, #SCTLR_ELx_M + msr sctlr_el1, x17 isb /* Everybody is enjoying the idmap, so we can rewrite swapper. */ @@ -281,9 +288,9 @@ skip_pgd: isb /* We're done: fire up the MMU again */ - mrs x18, sctlr_el1 - orr x18, x18, #SCTLR_ELx_M - msr sctlr_el1, x18 + mrs x17, sctlr_el1 + orr x17, x17, #SCTLR_ELx_M + msr sctlr_el1, x17 isb /* @@ -353,47 +360,48 @@ skip_pte: b.ne do_pte b next_pmd + .unreq cpu + .unreq num_cpus + .unreq swapper_pa + .unreq cur_pgdp + .unreq end_pgdp + .unreq pgd + .unreq cur_pudp + .unreq end_pudp + .unreq pud + .unreq cur_pmdp + .unreq end_pmdp + .unreq pmd + .unreq cur_ptep + .unreq end_ptep + .unreq pte + /* Secondary CPUs end up here */ __idmap_kpti_secondary: /* Uninstall swapper before surgery begins */ - __idmap_cpu_set_reserved_ttbr1 x18, x17 + __idmap_cpu_set_reserved_ttbr1 x16, x17 /* Increment the flag to let the boot CPU we're ready */ -1: ldxr w18, [flag_ptr] - add w18, w18, #1 - stxr w17, w18, [flag_ptr] +1: ldxr w16, [flag_ptr] + add w16, w16, #1 + stxr w17, w16, [flag_ptr] cbnz w17, 1b /* Wait for the boot CPU to finish messing around with swapper */ sevl 1: wfe - ldxr w18, [flag_ptr] - cbnz w18, 1b + ldxr w16, [flag_ptr] + cbnz w16, 1b /* All done, act like nothing happened */ - offset_ttbr1 swapper_ttb, x18 + offset_ttbr1 swapper_ttb, x16 msr ttbr1_el1, swapper_ttb isb ret - .unreq cpu - .unreq num_cpus - .unreq swapper_pa .unreq swapper_ttb .unreq flag_ptr - .unreq cur_pgdp - .unreq end_pgdp - .unreq pgd - .unreq cur_pudp - .unreq end_pudp - .unreq pud - .unreq cur_pmdp - .unreq end_pmdp - .unreq pmd - .unreq cur_ptep - .unreq end_ptep - .unreq pte -ENDPROC(idmap_kpti_install_ng_mappings) +SYM_FUNC_END(idmap_kpti_install_ng_mappings) .popsection #endif @@ -404,7 +412,7 @@ ENDPROC(idmap_kpti_install_ng_mappings) * value of the SCTLR_EL1 register. */ .pushsection ".idmap.text", "awx" -ENTRY(__cpu_setup) +SYM_FUNC_START(__cpu_setup) tlbi vmalle1 // Invalidate local TLB dsb nsh @@ -416,23 +424,9 @@ ENTRY(__cpu_setup) enable_dbg // since this is per-cpu reset_pmuserenr_el0 x0 // Disable PMU access from EL0 /* - * Memory region attributes for LPAE: - * - * n = AttrIndx[2:0] - * n MAIR - * DEVICE_nGnRnE 000 00000000 - * DEVICE_nGnRE 001 00000100 - * DEVICE_GRE 010 00001100 - * NORMAL_NC 011 01000100 - * NORMAL 100 11111111 - * NORMAL_WT 101 10111011 + * Memory region attributes */ - ldr x5, =MAIR(0x00, MT_DEVICE_nGnRnE) | \ - MAIR(0x04, MT_DEVICE_nGnRE) | \ - MAIR(0x0c, MT_DEVICE_GRE) | \ - MAIR(0x44, MT_NORMAL_NC) | \ - MAIR(0xff, MT_NORMAL) | \ - MAIR(0xbb, MT_NORMAL_WT) + mov_q x5, MAIR_EL1_SET msr mair_el1, x5 /* * Prepare SCTLR @@ -475,4 +469,4 @@ ENTRY(__cpu_setup) #endif /* CONFIG_ARM64_HW_AFDBM */ msr tcr_el1, x10 ret // return to head.S -ENDPROC(__cpu_setup) +SYM_FUNC_END(__cpu_setup) diff --git a/arch/arm64/mm/ptdump_debugfs.c b/arch/arm64/mm/ptdump_debugfs.c index 064163f25592..1f2eae3e988b 100644 --- a/arch/arm64/mm/ptdump_debugfs.c +++ b/arch/arm64/mm/ptdump_debugfs.c @@ -7,7 +7,7 @@ static int ptdump_show(struct seq_file *m, void *v) { struct ptdump_info *info = m->private; - ptdump_walk_pgd(m, info); + ptdump_walk(m, info); return 0; } DEFINE_SHOW_ATTRIBUTE(ptdump); diff --git a/arch/arm64/xen/hypercall.S b/arch/arm64/xen/hypercall.S index c5f05c4a4d00..5b09aca55108 100644 --- a/arch/arm64/xen/hypercall.S +++ b/arch/arm64/xen/hypercall.S @@ -56,11 +56,11 @@ #define XEN_IMM 0xEA1 #define HYPERCALL_SIMPLE(hypercall) \ -ENTRY(HYPERVISOR_##hypercall) \ +SYM_FUNC_START(HYPERVISOR_##hypercall) \ mov x16, #__HYPERVISOR_##hypercall; \ hvc XEN_IMM; \ ret; \ -ENDPROC(HYPERVISOR_##hypercall) +SYM_FUNC_END(HYPERVISOR_##hypercall) #define HYPERCALL0 HYPERCALL_SIMPLE #define HYPERCALL1 HYPERCALL_SIMPLE @@ -86,7 +86,7 @@ HYPERCALL2(multicall); HYPERCALL2(vm_assist); HYPERCALL3(dm_op); -ENTRY(privcmd_call) +SYM_FUNC_START(privcmd_call) mov x16, x0 mov x0, x1 mov x1, x2 @@ -109,4 +109,4 @@ ENTRY(privcmd_call) */ uaccess_ttbr0_disable x6, x7 ret -ENDPROC(privcmd_call); +SYM_FUNC_END(privcmd_call); |