diff options
Diffstat (limited to 'arch/arm64')
420 files changed, 34731 insertions, 6144 deletions
diff --git a/arch/arm64/Kbuild b/arch/arm64/Kbuild new file mode 100644 index 000000000000..d6465823b281 --- /dev/null +++ b/arch/arm64/Kbuild @@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0-only +obj-y += kernel/ mm/ +obj-$(CONFIG_NET) += net/ +obj-$(CONFIG_KVM) += kvm/ +obj-$(CONFIG_XEN) += xen/ +obj-$(CONFIG_CRYPTO) += crypto/ diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index f940500a941b..41a9b4257b72 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -13,10 +13,8 @@ config ARM64 select ARCH_HAS_DEBUG_VIRTUAL select ARCH_HAS_DEVMEM_IS_ALLOWED select ARCH_HAS_DMA_COHERENT_TO_PFN - select ARCH_HAS_DMA_MMAP_PGPROT select ARCH_HAS_DMA_PREP_COHERENT select ARCH_HAS_ACPI_TABLE_UPGRADE if ACPI - select ARCH_HAS_ELF_RANDOMIZE select ARCH_HAS_FAST_MULTIPLIER select ARCH_HAS_FORTIFY_SOURCE select ARCH_HAS_GCOV_PROFILE_ALL @@ -24,8 +22,10 @@ config ARM64 select ARCH_HAS_KCOV select ARCH_HAS_KEEPINITRD select ARCH_HAS_MEMBARRIER_SYNC_CORE + select ARCH_HAS_PTE_DEVMAP select ARCH_HAS_PTE_SPECIAL select ARCH_HAS_SETUP_DMA_OPS + select ARCH_HAS_SET_DIRECT_MAP select ARCH_HAS_SET_MEMORY select ARCH_HAS_STRICT_KERNEL_RWX select ARCH_HAS_STRICT_MODULE_RWX @@ -70,7 +70,9 @@ config ARM64 select ARCH_SUPPORTS_INT128 if GCC_VERSION >= 50000 || CC_IS_CLANG select ARCH_SUPPORTS_NUMA_BALANCING select ARCH_WANT_COMPAT_IPC_PARSE_VERSION if COMPAT + select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT select ARCH_WANT_FRAME_POINTERS + select ARCH_WANT_HUGE_PMD_SHARE if ARM64_4K_PAGES || (ARM64_16K_PAGES && !ARM64_VA_BITS_36) select ARCH_HAS_UBSAN_SANITIZE_ALL select ARM_AMBA select ARM_ARCH_TIMER @@ -107,6 +109,8 @@ config ARM64 select GENERIC_STRNCPY_FROM_USER select GENERIC_STRNLEN_USER select GENERIC_TIME_VSYSCALL + select GENERIC_GETTIMEOFDAY + select GENERIC_COMPAT_VDSO if (!CPU_BIG_ENDIAN && COMPAT) select HANDLE_DOMAIN_IRQ select HARDIRQS_SW_RESEND select HAVE_PCI @@ -130,6 +134,7 @@ config ARM64 select HAVE_ARCH_TRANSPARENT_HUGEPAGE select HAVE_ARCH_VMAP_STACK select HAVE_ARM_SMCCC + select HAVE_ASM_MODVERSIONS select HAVE_EBPF_JIT select HAVE_C_RECORDMCOUNT select HAVE_CMPXCHG_DOUBLE @@ -140,8 +145,10 @@ config ARM64 select HAVE_DMA_CONTIGUOUS select HAVE_DYNAMIC_FTRACE select HAVE_EFFICIENT_UNALIGNED_ACCESS + select HAVE_FAST_GUP select HAVE_FTRACE_MCOUNT_RECORD select HAVE_FUNCTION_TRACER + select HAVE_FUNCTION_ERROR_INJECTION select HAVE_FUNCTION_GRAPH_TRACER select HAVE_GCC_PLUGINS select HAVE_HW_BREAKPOINT if PERF_EVENTS @@ -160,6 +167,7 @@ config ARM64 select HAVE_SYSCALL_TRACEPOINTS select HAVE_KPROBES select HAVE_KRETPROBES + select HAVE_GENERIC_VDSO select IOMMU_DMA if IOMMU_SUPPORT select IRQ_DOMAIN select IRQ_FORCED_THREADING @@ -260,10 +268,8 @@ config GENERIC_CALIBRATE_DELAY def_bool y config ZONE_DMA32 - def_bool y - -config HAVE_GENERIC_GUP - def_bool y + bool "Support DMA32 zone" if EXPERT + default y config ARCH_ENABLE_MEMORY_HOTPLUG def_bool y @@ -281,7 +287,7 @@ config PGTABLE_LEVELS int default 2 if ARM64_16K_PAGES && ARM64_VA_BITS_36 default 2 if ARM64_64K_PAGES && ARM64_VA_BITS_42 - default 3 if ARM64_64K_PAGES && (ARM64_VA_BITS_48 || ARM64_USER_VA_BITS_52) + default 3 if ARM64_64K_PAGES && (ARM64_VA_BITS_48 || ARM64_VA_BITS_52) default 3 if ARM64_4K_PAGES && ARM64_VA_BITS_39 default 3 if ARM64_16K_PAGES && ARM64_VA_BITS_47 default 4 if !ARM64_64K_PAGES && ARM64_VA_BITS_48 @@ -292,6 +298,21 @@ config ARCH_SUPPORTS_UPROBES config ARCH_PROC_KCORE_TEXT def_bool y +config KASAN_SHADOW_OFFSET + hex + depends on KASAN + default 0xdfffa00000000000 if (ARM64_VA_BITS_48 || ARM64_VA_BITS_52) && !KASAN_SW_TAGS + default 0xdfffd00000000000 if ARM64_VA_BITS_47 && !KASAN_SW_TAGS + default 0xdffffe8000000000 if ARM64_VA_BITS_42 && !KASAN_SW_TAGS + default 0xdfffffd000000000 if ARM64_VA_BITS_39 && !KASAN_SW_TAGS + default 0xdffffffa00000000 if ARM64_VA_BITS_36 && !KASAN_SW_TAGS + default 0xefff900000000000 if (ARM64_VA_BITS_48 || ARM64_VA_BITS_52) && KASAN_SW_TAGS + default 0xefffc80000000000 if ARM64_VA_BITS_47 && KASAN_SW_TAGS + default 0xeffffe4000000000 if ARM64_VA_BITS_42 && KASAN_SW_TAGS + default 0xefffffc800000000 if ARM64_VA_BITS_39 && KASAN_SW_TAGS + default 0xeffffff900000000 if ARM64_VA_BITS_36 && KASAN_SW_TAGS + default 0xffffffffffffffff + source "arch/arm64/Kconfig.platforms" menu "Kernel Features" @@ -739,13 +760,14 @@ config ARM64_VA_BITS_47 config ARM64_VA_BITS_48 bool "48-bit" -config ARM64_USER_VA_BITS_52 - bool "52-bit (user)" +config ARM64_VA_BITS_52 + bool "52-bit" depends on ARM64_64K_PAGES && (ARM64_PAN || !ARM64_SW_TTBR0_PAN) help Enable 52-bit virtual addressing for userspace when explicitly - requested via a hint to mmap(). The kernel will continue to - use 48-bit virtual addresses for its own mappings. + requested via a hint to mmap(). The kernel will also use 52-bit + virtual addresses for its own mappings (provided HW support for + this feature is available, otherwise it reverts to 48-bit). NOTE: Enabling 52-bit virtual addressing in conjunction with ARMv8.3 Pointer Authentication will result in the PAC being @@ -758,7 +780,7 @@ endchoice config ARM64_FORCE_52BIT bool "Force 52-bit virtual addresses for userspace" - depends on ARM64_USER_VA_BITS_52 && EXPERT + depends on ARM64_VA_BITS_52 && EXPERT help For systems with 52-bit userspace VAs enabled, the kernel will attempt to maintain compatibility with older software by providing 48-bit VAs @@ -775,7 +797,8 @@ config ARM64_VA_BITS default 39 if ARM64_VA_BITS_39 default 42 if ARM64_VA_BITS_42 default 47 if ARM64_VA_BITS_47 - default 48 if ARM64_VA_BITS_48 || ARM64_USER_VA_BITS_52 + default 48 if ARM64_VA_BITS_48 + default 52 if ARM64_VA_BITS_52 choice prompt "Physical address space size" @@ -902,7 +925,6 @@ config SYS_SUPPORTS_HUGETLBFS def_bool y config ARCH_WANT_HUGE_PMD_SHARE - def_bool y if ARM64_4K_PAGES || (ARM64_16K_PAGES && !ARM64_VA_BITS_36) config ARCH_HAS_CACHE_LINE_SIZE def_bool y @@ -933,7 +955,6 @@ config PARAVIRT config PARAVIRT_TIME_ACCOUNTING bool "Paravirtual steal time accounting" select PARAVIRT - default n help Select this option to enable fine granularity task steal time accounting. Time spent executing other tasks in parallel with @@ -994,7 +1015,7 @@ config CRASH_DUMP reserved region and then later executed after a crash by kdump/kexec. - For more details see Documentation/kdump/kdump.txt + For more details see Documentation/admin-guide/kdump/kdump.rst config XEN_DOM0 def_bool y @@ -1107,6 +1128,15 @@ config ARM64_SW_TTBR0_PAN zeroed area and reserved ASID. The user access routines restore the valid TTBR0_EL1 temporarily. +config ARM64_TAGGED_ADDR_ABI + bool "Enable the tagged user addresses syscall ABI" + default y + help + When this option is enabled, user applications can opt in to a + relaxed ABI via prctl() allowing tagged addresses to be passed + to system calls as pointer arguments. For details, see + Documentation/arm64/tagged-address-abi.rst. + menuconfig COMPAT bool "Kernel support for 32-bit EL0" depends on ARM64_4K_PAGES || EXPERT @@ -1140,7 +1170,7 @@ config KUSER_HELPERS the system. This permits binaries to be run on ARMv4 through to ARMv8 without modification. - See Documentation/arm/kernel_user_helpers.txt for details. + See Documentation/arm/kernel_user_helpers.rst for details. However, the fixed address nature of these helpers can be used by ROP (return orientated programming) authors when creating @@ -1260,6 +1290,7 @@ config ARM64_PAN config ARM64_LSE_ATOMICS bool "Atomic instructions" + depends on JUMP_LABEL default y help As part of the Large System Extensions, ARMv8.1 introduces new @@ -1418,12 +1449,27 @@ config ARM64_SVE KVM in the same kernel image. config ARM64_MODULE_PLTS - bool + bool "Use PLTs to allow module memory to spill over into vmalloc area" + depends on MODULES select HAVE_MOD_ARCH_SPECIFIC + help + Allocate PLTs when loading modules so that jumps and calls whose + targets are too far away for their relative offsets to be encoded + in the instructions themselves can be bounced via veneers in the + module's PLT. This allows modules to be allocated in the generic + vmalloc area after the dedicated module memory area has been + exhausted. + + When running with address space randomization (KASLR), the module + region itself may be too far away for ordinary relative jumps and + calls, and so in that case, module PLTs are required and cannot be + disabled. + + Specific errata workaround(s) might also force module PLTs to be + enabled (ARM64_ERRATUM_843419). config ARM64_PSEUDO_NMI bool "Support for NMI-like interrupts" - depends on BROKEN # 1556553607-46531-1-git-send-email-julien.thierry@arm.com select CONFIG_ARM_GIC_V3 help Adds support for mimicking Non-Maskable Interrupts through the use of @@ -1436,8 +1482,20 @@ config ARM64_PSEUDO_NMI If unsure, say N +if ARM64_PSEUDO_NMI +config ARM64_DEBUG_PRIORITY_MASKING + bool "Debug interrupt priority masking" + help + This adds runtime checks to functions enabling/disabling + interrupts when using priority masking. The additional checks verify + the validity of ICC_PMR_EL1 when calling concerned functions. + + If unsure, say N +endif + config RELOCATABLE bool + select ARCH_HAS_RELR help This builds the kernel as a Position Independent Executable (PIE), which retains all relocation metadata required to relocate the diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms index d07fc063c930..16d761475a86 100644 --- a/arch/arm64/Kconfig.platforms +++ b/arch/arm64/Kconfig.platforms @@ -66,14 +66,18 @@ config ARCH_BITMAIN config ARCH_BRCMSTB bool "Broadcom Set-Top-Box SoCs" + select ARCH_HAS_RESET_CONTROLLER + select BCM7038_L1_IRQ select BRCMSTB_L2_IRQ select GENERIC_IRQ_CHIP + select PINCTRL help This enables support for Broadcom's ARMv8 Set Top Box SoCs config ARCH_EXYNOS bool "ARMv8 based Samsung Exynos SoC family" select COMMON_CLK_SAMSUNG + select EXYNOS_CHIPID select EXYNOS_PM_DOMAINS if PM_GENERIC_DOMAINS select EXYNOS_PMU select HAVE_S3C2410_WATCHDOG if WATCHDOG @@ -170,6 +174,7 @@ config ARCH_MXC select PM select PM_GENERIC_DOMAINS select SOC_BUS + select TIMER_IMX_SYS_CTR help This enables support for the ARMv8 based SoCs in the NXP i.MX family. diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile index e9d2e578cbe6..84a3d502c5a5 100644 --- a/arch/arm64/Makefile +++ b/arch/arm64/Makefile @@ -30,8 +30,6 @@ LDFLAGS_vmlinux += --fix-cortex-a53-843419 endif endif -KBUILD_DEFCONFIG := defconfig - # Check for binutils support for specific extensions lseinstr := $(call as-instr,.arch_extension lse,-DCONFIG_AS_LSE=1) @@ -41,6 +39,12 @@ $(warning LSE atomics not supported by binutils) endif endif +cc_has_k_constraint := $(call try-run,echo \ + 'int main(void) { \ + asm volatile("and w0, w0, %w0" :: "K" (4294967295)); \ + return 0; \ + }' | $(CC) -S -x c -o "$$TMP" -,,-DCONFIG_CC_HAS_K_CONSTRAINT=1) + ifeq ($(CONFIG_ARM64), y) brokengasinst := $(call as-instr,1:\n.inst 0\n.rept . - 1b\n\nnop\n.endr\n,,-DCONFIG_BROKEN_GAS_INST=1) @@ -49,10 +53,27 @@ $(warning Detected assembler with broken .inst; disassembly will be unreliable) endif endif -KBUILD_CFLAGS += -mgeneral-regs-only $(lseinstr) $(brokengasinst) +ifeq ($(CONFIG_GENERIC_COMPAT_VDSO), y) + CROSS_COMPILE_COMPAT ?= $(CONFIG_CROSS_COMPILE_COMPAT_VDSO:"%"=%) + + ifeq ($(CONFIG_CC_IS_CLANG), y) + $(warning CROSS_COMPILE_COMPAT is clang, the compat vDSO will not be built) + else ifeq ($(strip $(CROSS_COMPILE_COMPAT)),) + $(warning CROSS_COMPILE_COMPAT not defined or empty, the compat vDSO will not be built) + else ifeq ($(shell which $(CROSS_COMPILE_COMPAT)gcc 2> /dev/null),) + $(error $(CROSS_COMPILE_COMPAT)gcc not found, check CROSS_COMPILE_COMPAT) + else + export CROSS_COMPILE_COMPAT + export CONFIG_COMPAT_VDSO := y + compat_vdso := -DCONFIG_COMPAT_VDSO=1 + endif +endif + +KBUILD_CFLAGS += -mgeneral-regs-only $(lseinstr) $(brokengasinst) \ + $(compat_vdso) $(cc_has_k_constraint) KBUILD_CFLAGS += -fno-asynchronous-unwind-tables KBUILD_CFLAGS += $(call cc-disable-warning, psabi) -KBUILD_AFLAGS += $(lseinstr) $(brokengasinst) +KBUILD_AFLAGS += $(lseinstr) $(brokengasinst) $(compat_vdso) KBUILD_CFLAGS += $(call cc-option,-mabi=lp64) KBUILD_AFLAGS += $(call cc-option,-mabi=lp64) @@ -87,7 +108,7 @@ endif CHECKFLAGS += -D__aarch64__ ifeq ($(CONFIG_ARM64_MODULE_PLTS),y) -KBUILD_LDFLAGS_MODULE += -T $(srctree)/arch/arm64/kernel/module.lds +KBUILD_LDS_MODULE += $(srctree)/arch/arm64/kernel/module.lds endif # Default value @@ -112,21 +133,9 @@ KBUILD_CFLAGS += -DKASAN_SHADOW_SCALE_SHIFT=$(KASAN_SHADOW_SCALE_SHIFT) KBUILD_CPPFLAGS += -DKASAN_SHADOW_SCALE_SHIFT=$(KASAN_SHADOW_SCALE_SHIFT) KBUILD_AFLAGS += -DKASAN_SHADOW_SCALE_SHIFT=$(KASAN_SHADOW_SCALE_SHIFT) -# KASAN_SHADOW_OFFSET = VA_START + (1 << (VA_BITS - KASAN_SHADOW_SCALE_SHIFT)) -# - (1 << (64 - KASAN_SHADOW_SCALE_SHIFT)) -# in 32-bit arithmetic -KASAN_SHADOW_OFFSET := $(shell printf "0x%08x00000000\n" $$(( \ - (0xffffffff & (-1 << ($(CONFIG_ARM64_VA_BITS) - 32))) \ - + (1 << ($(CONFIG_ARM64_VA_BITS) - 32 - $(KASAN_SHADOW_SCALE_SHIFT))) \ - - (1 << (64 - 32 - $(KASAN_SHADOW_SCALE_SHIFT))) )) ) - export TEXT_OFFSET GZFLAGS -core-y += arch/arm64/kernel/ arch/arm64/mm/ -core-$(CONFIG_NET) += arch/arm64/net/ -core-$(CONFIG_KVM) += arch/arm64/kvm/ -core-$(CONFIG_XEN) += arch/arm64/xen/ -core-$(CONFIG_CRYPTO) += arch/arm64/crypto/ +core-y += arch/arm64/ libs-y := arch/arm64/lib/ $(libs-y) core-$(CONFIG_EFI_STUB) += $(objtree)/drivers/firmware/efi/libstub/lib.a @@ -164,6 +173,9 @@ ifeq ($(KBUILD_EXTMOD),) prepare: vdso_prepare vdso_prepare: prepare0 $(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso include/generated/vdso-offsets.h + $(if $(CONFIG_COMPAT_VDSO),$(Q)$(MAKE) \ + $(build)=arch/arm64/kernel/vdso32 \ + include/generated/vdso32-offsets.h) endif define archhelp diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile index f6db0611cb85..d2418021768b 100644 --- a/arch/arm64/boot/dts/allwinner/Makefile +++ b/arch/arm64/boot/dts/allwinner/Makefile @@ -4,6 +4,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-bananapi-m64.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-nanopi-a64.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-oceanic-5205-5inmfd.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-olinuxino.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-olinuxino-emmc.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-orangepi-win.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-lts.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb @@ -25,3 +26,4 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-3.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-lite2.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-one-plus.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6.dtb diff --git a/arch/arm64/boot/dts/allwinner/axp803.dtsi b/arch/arm64/boot/dts/allwinner/axp803.dtsi index c3a618e1279a..f0349ef4bfdd 100644 --- a/arch/arm64/boot/dts/allwinner/axp803.dtsi +++ b/arch/arm64/boot/dts/allwinner/axp803.dtsi @@ -185,4 +185,10 @@ status = "disabled"; }; }; + + usb_power_supply: usb-power-supply { + compatible = "x-powers,axp803-usb-power-supply", + "x-powers,axp813-usb-power-supply"; + status = "disabled"; + }; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts index 019ae09ea0fd..5634245d11db 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts @@ -85,8 +85,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins>; status = "okay"; sensor@48 { @@ -99,6 +97,22 @@ bias-pull-up; }; +&i2c1 { + status = "okay"; + + touchscreen@5d { + compatible = "goodix,gt5663"; + reg = <0x5d>; + AVDD28-supply = <®_ldo_io0>; /* VCC-CTP: GPIO0-LDO */ + interrupt-parent = <&pio>; + interrupts = <7 4 IRQ_TYPE_EDGE_FALLING>; + irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* CTP-INT: PH4 */ + reset-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* CTP-RST: PH8 */ + touchscreen-inverted-x; + touchscreen-inverted-y; + }; +}; + &mmc1 { pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; @@ -262,6 +276,13 @@ regulator-name = "vdd-cpus"; }; +®_ldo_io0 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "vcc-ctp"; + status = "okay"; +}; + ®_rtc_ldo { regulator-name = "vcc-rtc"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts index 0a56c0c23ba1..208373efee49 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts @@ -145,8 +145,6 @@ }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; status = "okay"; }; @@ -394,8 +392,13 @@ status = "okay"; }; +&usb_power_supply { + status = "okay"; +}; + &usbphy { usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */ + usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_drivevbus>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts index f4e78531f639..9b9d9157128c 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts @@ -120,12 +120,6 @@ }; /* i2c1 connected with gpio headers like pine64, bananapi */ -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; - status = "disabled"; -}; - &i2c1_pins { bias-pull-up; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts index 6a2154525d1e..787ebd805a3b 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts @@ -37,6 +37,22 @@ status = "okay"; }; +&i2c0 { + status = "okay"; + + touchscreen@5d { + compatible = "goodix,gt911"; + reg = <0x5d>; + AVDD28-supply = <®_ldo_io0>; /* VDD_CTP: GPIO0-LDO */ + interrupt-parent = <&pio>; + interrupts = <7 4 IRQ_TYPE_EDGE_FALLING>; + irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* CTP-INT: PH4 */ + reset-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* CTP-RST: PH11 */ + touchscreen-inverted-x; + touchscreen-inverted-y; + }; +}; + &mdio { ext_rgmii_phy: ethernet-phy@1 { compatible = "ethernet-phy-ieee802.3-c22"; @@ -52,6 +68,13 @@ regulator-name = "vcc-phy"; }; +®_ldo_io0 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "vdd-ctp"; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pb_pins>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino-emmc.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino-emmc.dts new file mode 100644 index 000000000000..96ab0227e82d --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino-emmc.dts @@ -0,0 +1,23 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2018 Martin Ayotte <martinayotte@gmail.com> + * Copyright (C) 2019 Sunil Mohan Adapa <sunil@medhas.org> + */ + +#include "sun50i-a64-olinuxino.dts" + +/ { + model = "Olimex A64-Olinuxino-eMMC"; + compatible = "olimex,a64-olinuxino-emmc", "allwinner,sun50i-a64"; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + vmmc-supply = <®_dcdc1>; + vqmmc-supply = <®_dcdc1>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts index 510f661229dc..04446e4716c4 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts @@ -109,6 +109,8 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */ + clocks = <&rtc 1>; + clock-names = "ext_clock"; }; }; @@ -170,6 +172,14 @@ bus-width = <4>; non-removable; status = "okay"; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&r_pio>; + interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>; /* PL7 */ + interrupt-names = "host-wake"; + }; }; &ohci0 { @@ -180,6 +190,10 @@ status = "okay"; }; +&r_ir { + status = "okay"; +}; + &r_rsb { status = "okay"; @@ -342,7 +356,20 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + uart-has-rtscts; status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + max-speed = <1500000>; + clocks = <&rtc 1>; + clock-names = "lpo"; + vbat-supply = <®_dldo2>; + vddio-supply = <®_dldo4>; + device-wakeup-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ + host-wakeup-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */ + shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ + }; }; /* On Pi-2 connector, RTS/CTS optional */ diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts index b7ac6374b178..409523cb0950 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts @@ -122,8 +122,6 @@ }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts index 0ec46b969a75..1069e7012c9c 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts @@ -79,6 +79,25 @@ compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ }; + + speaker_amp: audio-amplifier { + compatible = "simple-audio-amplifier"; + enable-gpios = <&r_pio 0 12 GPIO_ACTIVE_HIGH>; /* PL12 */ + sound-name-prefix = "Speaker Amp"; + }; +}; + +&codec { + status = "okay"; +}; + +&codec_analog { + cpvdd-supply = <®_eldo1>; + status = "okay"; +}; + +&dai { + status = "okay"; }; &ehci1 { @@ -92,8 +111,6 @@ */ &i2c0 { clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins>; status = "okay"; }; @@ -279,6 +296,29 @@ vcc-hdmi-supply = <®_dldo1>; }; +&sound { + simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>; + simple-audio-card,widgets = "Headphone", "Headphone Jack", + "Microphone", "Headset Microphone", + "Microphone", "Internal Microphone", + "Speaker", "Internal Speaker"; + simple-audio-card,routing = + "Left DAC", "AIF1 Slot 0 Left", + "Right DAC", "AIF1 Slot 0 Right", + "AIF1 Slot 0 Left ADC", "Left ADC", + "AIF1 Slot 0 Right ADC", "Right ADC", + "Headphone Jack", "HP", + "Speaker Amp INL", "LINEOUT", + "Speaker Amp INR", "LINEOUT", + "Internal Speaker", "Speaker Amp OUTL", + "Internal Speaker", "Speaker Amp OUTR", + "Internal Microphone", "MBIAS", + "MIC1", "Internal Microphone", + "Headset Microphone", "HBIAS", + "MIC2", "Headset Microphone"; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pb_pins>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index 8c5b521e6389..69128a6dfc46 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -228,10 +228,10 @@ display_clocks: clock@0 { compatible = "allwinner,sun50i-a64-de2-clk"; reg = <0x0 0x100000>; - clocks = <&ccu CLK_DE>, - <&ccu CLK_BUS_DE>; - clock-names = "mod", - "bus"; + clocks = <&ccu CLK_BUS_DE>, + <&ccu CLK_DE>; + clock-names = "bus", + "mod"; resets = <&ccu RST_BUS_DE>; #clock-cells = <1>; #reset-cells = <1>; @@ -611,6 +611,16 @@ function = "i2c1"; }; + /omit-if-no-ref/ + lcd_rgb666_pins: lcd-rgb666-pins { + pins = "PD0", "PD1", "PD2", "PD3", "PD4", + "PD5", "PD6", "PD7", "PD8", "PD9", + "PD10", "PD11", "PD12", "PD13", + "PD14", "PD15", "PD16", "PD17", + "PD18", "PD19", "PD20", "PD21"; + function = "lcd0"; + }; + mmc0_pins: mmc0-pins { pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; @@ -730,6 +740,14 @@ status = "disabled"; }; + lradc: lradc@1c21800 { + compatible = "allwinner,sun50i-a64-lradc", + "allwinner,sun8i-a83t-r-lradc"; + reg = <0x01c21800 0x400>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + i2s0: i2s@1c22000 { #sound-dai-cells = <0>; compatible = "allwinner,sun50i-a64-i2s", @@ -842,6 +860,8 @@ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_I2C0>; resets = <&ccu RST_BUS_I2C0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -853,6 +873,8 @@ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_I2C1>; resets = <&ccu RST_BUS_I2C1>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -993,7 +1015,7 @@ resets = <&ccu RST_BUS_HDMI1>; reset-names = "ctrl"; phys = <&hdmi_phy>; - phy-names = "hdmi-phy"; + phy-names = "phy"; status = "disabled"; ports { @@ -1072,6 +1094,19 @@ #size-cells = <0>; }; + r_ir: ir@1f02000 { + compatible = "allwinner,sun50i-a64-ir", + "allwinner,sun6i-a31-ir"; + reg = <0x01f02000 0x400>; + clocks = <&r_ccu CLK_APB0_IR>, <&r_ccu CLK_IR>; + clock-names = "apb", "ir"; + resets = <&r_ccu RST_APB0_IR>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&r_ir_rx_pin>; + status = "disabled"; + }; + r_pwm: pwm@1f03800 { compatible = "allwinner,sun50i-a64-pwm", "allwinner,sun5i-a13-pwm"; @@ -1099,6 +1134,11 @@ function = "s_i2c"; }; + r_ir_rx_pin: r-ir-rx-pin { + pins = "PL11"; + function = "s_cir_rx"; + }; + r_pwm_pin: r-pwm-pin { pins = "PL10"; function = "s_pwm"; @@ -1129,6 +1169,7 @@ "allwinner,sun6i-a31-wdt"; reg = <0x01c20ca0 0x20>; interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc24M>; }; }; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts index 62409afbaf06..c924090331d0 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts @@ -55,8 +55,7 @@ regulator-ramp-delay = <50>; /* 4ms */ gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ gpios-states = <0x1>; - states = <1100000 0x0 - 1300000 0x1>; + states = <1100000 0>, <1300000 1>; }; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts index 9887948d5c86..1c7dde84e54d 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts @@ -104,8 +104,7 @@ regulator-ramp-delay = <50>; /* 4ms */ gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; gpios-states = <0x1>; - states = <1100000 0x0 - 1300000 0x1>; + states = <1100000 0>, <1300000 1>; }; wifi_pwrseq: wifi_pwrseq { diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts index 0dc33c90dd60..1d05d570142f 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts @@ -25,6 +25,7 @@ connector { compatible = "hdmi-connector"; type = "a"; + ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */ port { hdmi_con_in: endpoint { @@ -51,6 +52,24 @@ regulator-max-microvolt = <5000000>; regulator-always-on; }; + + sound-spdif { + compatible = "simple-audio-card"; + simple-audio-card,name = "sun50i-h6-spdif"; + + simple-audio-card,cpu { + sound-dai = <&spdif>; + }; + + simple-audio-card,codec { + sound-dai = <&spdif_out>; + }; + }; + + spdif_out: spdif-out { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + }; }; &de { @@ -232,6 +251,10 @@ }; }; +&r_ir { + status = "okay"; +}; + &r_pio { /* * PL0 and PL1 are used for PMIC I2C @@ -243,6 +266,10 @@ vcc-pm-supply = <®_aldo1>; }; +&spdif { + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_ph_pins>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts index 17d496990108..eb379cd402ac 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts @@ -21,6 +21,18 @@ stdout-path = "serial0:115200n8"; }; + connector { + compatible = "hdmi-connector"; + ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */ + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; @@ -44,12 +56,44 @@ regulator-max-microvolt = <5000000>; regulator-always-on; }; + + reg_vcc33_wifi: vcc33-wifi { + /* Always on 3.3V regulator for WiFi and BT */ + compatible = "regulator-fixed"; + regulator-name = "vcc33-wifi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + vin-supply = <®_vcc5v>; + }; + + reg_vcc_wifi_io: vcc-wifi-io { + /* Always on 1.8V/300mA regulator for WiFi and BT IO */ + compatible = "regulator-fixed"; + regulator-name = "vcc-wifi-io"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + vin-supply = <®_vcc33_wifi>; + }; + + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rtc 1>; + clock-names = "ext_clock"; + reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */ + post-power-on-delay-ms = <200>; + }; }; &cpu0 { cpu-supply = <®_dcdca>; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -58,6 +102,16 @@ status = "okay"; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &mmc0 { vmmc-supply = <®_cldo1>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ @@ -65,6 +119,23 @@ status = "okay"; }; +&mmc1 { + vmmc-supply = <®_vcc33_wifi>; + vqmmc-supply = <®_vcc_wifi_io>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + brcm: sdio-wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&r_pio>; + interrupts = <1 0 IRQ_TYPE_LEVEL_LOW>; /* PM0 */ + interrupt-names = "host-wake"; + }; +}; + &ohci0 { status = "okay"; }; @@ -76,6 +147,7 @@ &pio { vcc-pc-supply = <®_bldo2>; vcc-pd-supply = <®_cldo1>; + vcc-pg-supply = <®_vcc_wifi_io>; }; &r_i2c { diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi index 62e27948a3fa..ec9b6a578e3f 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi @@ -189,6 +189,10 @@ }; }; +&r_ir { + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_ph_pins>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts index 4802902e128f..30102daf83cc 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts @@ -127,6 +127,12 @@ status = "okay"; }; +&pio { + vcc-pc-supply = <®_bldo2>; + vcc-pd-supply = <®_cldo1>; + vcc-pg-supply = <®_aldo1>; +}; + &r_i2c { status = "okay"; @@ -243,10 +249,20 @@ pcf8563: rtc@51 { compatible = "nxp,pcf8563"; reg = <0x51>; + interrupt-parent = <&r_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; #clock-cells = <0>; }; }; +&r_ir { + status = "okay"; +}; + +&r_pio { + vcc-pm-supply = <®_aldo1>; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_ph_pins>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts new file mode 100644 index 000000000000..7e7cb10e3d96 --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts @@ -0,0 +1,100 @@ +// SPDX-License-Identifier: (GPL-2.0+ or MIT) +/* + * Copyright (c) 2019 Jernej Skrabec <jernej.skrabec@siol.net> + */ + +/dts-v1/; + +#include "sun50i-h6.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Tanix TX6"; + compatible = "oranth,tanix-tx6", "allwinner,sun50i-h6"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + connector { + compatible = "hdmi-connector"; + ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */ + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + reg_vcc3v3: vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&de { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci3 { + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + vmmc-supply = <®_vcc3v3>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; + bus-width = <4>; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci3 { + status = "okay"; +}; + +&r_ir { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_ph_pins>; + status = "okay"; +}; + +&usb2otg { + dr_mode = "host"; + status = "okay"; +}; + +&usb2phy { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi index 16c5c3d0fd81..4020a1aafa3e 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi @@ -56,14 +56,6 @@ status = "disabled"; }; - iosc: internal-osc-clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <16000000>; - clock-accuracy = <300000000>; - clock-output-names = "iosc"; - }; - osc24M: osc24M_clk { #clock-cells = <0>; compatible = "fixed-clock"; @@ -71,11 +63,11 @@ clock-output-names = "osc24M"; }; - osc32k: osc32k_clk { + ext_osc32k: ext_osc32k_clk { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; - clock-output-names = "osc32k"; + clock-output-names = "ext_osc32k"; }; psci { @@ -197,17 +189,39 @@ ccu: clock@3001000 { compatible = "allwinner,sun50i-h6-ccu"; reg = <0x03001000 0x1000>; - clocks = <&osc24M>, <&osc32k>, <&iosc>; + clocks = <&osc24M>, <&rtc 0>, <&rtc 2>; clock-names = "hosc", "losc", "iosc"; #clock-cells = <1>; #reset-cells = <1>; }; - sid: sid@3006000 { + dma: dma-controller@3002000 { + compatible = "allwinner,sun50i-h6-dma"; + reg = <0x03002000 0x1000>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_DMA>, <&ccu CLK_MBUS_DMA>; + clock-names = "bus", "mbus"; + dma-channels = <16>; + dma-requests = <46>; + resets = <&ccu RST_BUS_DMA>; + #dma-cells = <1>; + }; + + sid: efuse@3006000 { compatible = "allwinner,sun50i-h6-sid"; reg = <0x03006000 0x400>; }; + watchdog: watchdog@30090a0 { + compatible = "allwinner,sun50i-h6-wdt", + "allwinner,sun6i-a31-wdt"; + reg = <0x030090a0 0x20>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc24M>; + /* Broken on some H6 boards */ + status = "disabled"; + }; + pio: pinctrl@300b000 { compatible = "allwinner,sun50i-h6-pinctrl"; reg = <0x0300b000 0x400>; @@ -215,7 +229,7 @@ <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_APB1>, <&osc24M>, <&osc32k>; + clocks = <&ccu CLK_APB1>, <&osc24M>, <&rtc 0>; clock-names = "apb", "hosc", "losc"; gpio-controller; #gpio-cells = <3>; @@ -235,6 +249,21 @@ function = "hdmi"; }; + i2c0_pins: i2c0-pins { + pins = "PD25", "PD26"; + function = "i2c0"; + }; + + i2c1_pins: i2c1-pins { + pins = "PH5", "PH6"; + function = "i2c1"; + }; + + i2c2_pins: i2c2-pins { + pins = "PD23", "PD24"; + function = "i2c2"; + }; + mmc0_pins: mmc0-pins { pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; @@ -261,6 +290,11 @@ bias-pull-up; }; + spdif_tx_pin: spdif-tx-pin { + pins = "PH7"; + function = "spdif"; + }; + uart0_ph_pins: uart0-ph-pins { pins = "PH0", "PH1"; function = "uart0"; @@ -370,6 +404,48 @@ status = "disabled"; }; + i2c0: i2c@5002000 { + compatible = "allwinner,sun50i-h6-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x05002000 0x400>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_I2C0>; + resets = <&ccu RST_BUS_I2C0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c1: i2c@5002400 { + compatible = "allwinner,sun50i-h6-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x05002400 0x400>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_I2C1>; + resets = <&ccu RST_BUS_I2C1>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c2: i2c@5002800 { + compatible = "allwinner,sun50i-h6-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x05002800 0x400>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_I2C2>; + resets = <&ccu RST_BUS_I2C2>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + emac: ethernet@5020000 { compatible = "allwinner,sun50i-h6-emac", "allwinner,sun50i-a64-emac"; @@ -390,6 +466,21 @@ }; }; + spdif: spdif@5093000 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun50i-h6-spdif"; + reg = <0x05093000 0x400>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>; + clock-names = "apb", "spdif"; + resets = <&ccu RST_BUS_SPDIF>; + dmas = <&dma 2>; + dma-names = "tx"; + pinctrl-names = "default"; + pinctrl-0 = <&spdif_tx_pin>; + status = "disabled"; + }; + usb2otg: usb@5100000 { compatible = "allwinner,sun50i-h6-musb", "allwinner,sun8i-a33-musb"; @@ -483,7 +574,7 @@ resets = <&ccu RST_BUS_HDMI_SUB>, <&ccu RST_BUS_HDCP>; reset-names = "ctrl", "hdcp"; phys = <&hdmi_phy>; - phy-names = "hdmi-phy"; + phy-names = "phy"; pinctrl-names = "default"; pinctrl-0 = <&hdmi_pins>; status = "disabled"; @@ -612,16 +703,34 @@ }; }; + rtc: rtc@7000000 { + compatible = "allwinner,sun50i-h6-rtc"; + reg = <0x07000000 0x400>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + clock-output-names = "osc32k", "osc32k-out", "iosc"; + clocks = <&ext_osc32k>; + #clock-cells = <1>; + }; + r_ccu: clock@7010000 { compatible = "allwinner,sun50i-h6-r-ccu"; reg = <0x07010000 0x400>; - clocks = <&osc24M>, <&osc32k>, <&iosc>, + clocks = <&osc24M>, <&rtc 0>, <&rtc 2>, <&ccu CLK_PLL_PERIPH0>; clock-names = "hosc", "losc", "iosc", "pll-periph"; #clock-cells = <1>; #reset-cells = <1>; }; + r_watchdog: watchdog@7020400 { + compatible = "allwinner,sun50i-h6-wdt", + "allwinner,sun6i-a31-wdt"; + reg = <0x07020400 0x20>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc24M>; + }; + r_intc: interrupt-controller@7021000 { compatible = "allwinner,sun50i-h6-r-intc", "allwinner,sun6i-a31-r-intc"; @@ -636,7 +745,7 @@ reg = <0x07022000 0x400>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&r_ccu CLK_R_APB1>, <&osc24M>, <&osc32k>; + clocks = <&r_ccu CLK_R_APB1>, <&osc24M>, <&rtc 0>; clock-names = "apb", "hosc", "losc"; gpio-controller; #gpio-cells = <3>; @@ -647,10 +756,30 @@ pins = "PL0", "PL1"; function = "s_i2c"; }; + + r_ir_rx_pin: r-ir-rx-pin { + pins = "PL9"; + function = "s_cir_rx"; + }; + }; + + r_ir: ir@7040000 { + compatible = "allwinner,sun50i-h6-ir", + "allwinner,sun6i-a31-ir"; + reg = <0x07040000 0x400>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&r_ccu CLK_R_APB1_IR>, + <&r_ccu CLK_IR>; + clock-names = "apb", "ir"; + resets = <&r_ccu RST_R_APB1_IR>; + pinctrl-names = "default"; + pinctrl-0 = <&r_ir_rx_pin>; + status = "disabled"; }; r_i2c: i2c@7081400 { - compatible = "allwinner,sun6i-a31-i2c"; + compatible = "allwinner,sun50i-h6-i2c", + "allwinner,sun6i-a31-i2c"; reg = <0x07081400 0x400>; interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&r_ccu CLK_R_APB2_I2C>; diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi index 470dcfd9de91..144a2c19ac02 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi @@ -138,7 +138,7 @@ }; gmac0: ethernet@ff800000 { - compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac"; + compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.74a", "snps,dwmac"; reg = <0xff800000 0x2000>; interrupts = <0 90 4>; interrupt-names = "macirq"; @@ -156,7 +156,7 @@ }; gmac1: ethernet@ff802000 { - compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac"; + compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.74a", "snps,dwmac"; reg = <0xff802000 0x2000>; interrupts = <0 91 4>; interrupt-names = "macirq"; @@ -169,12 +169,12 @@ rx-fifo-depth = <16384>; snps,multicast-filter-bins = <256>; iommus = <&smmu 2>; - altr,sysmgr-syscon = <&sysmgr 0x48 0>; + altr,sysmgr-syscon = <&sysmgr 0x48 8>; status = "disabled"; }; gmac2: ethernet@ff804000 { - compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac"; + compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.74a", "snps,dwmac"; reg = <0xff804000 0x2000>; interrupts = <0 92 4>; interrupt-names = "macirq"; @@ -187,7 +187,7 @@ rx-fifo-depth = <16384>; snps,multicast-filter-bins = <256>; iommus = <&smmu 3>; - altr,sysmgr-syscon = <&sysmgr 0x4c 0>; + altr,sysmgr-syscon = <&sysmgr 0x4c 16>; status = "disabled"; }; @@ -302,6 +302,22 @@ status = "disabled"; }; + nand: nand@ffb90000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "altr,socfpga-denali-nand"; + reg = <0xffb90000 0x10000>, + <0xffb80000 0x1000>; + reg-names = "nand_data", "denali_reg"; + interrupts = <0 97 4>; + clocks = <&clkmgr STRATIX10_NAND_CLK>, + <&clkmgr STRATIX10_NAND_X_CLK>, + <&clkmgr STRATIX10_NAND_ECC_CLK>; + clock-names = "nand", "nand_x", "ecc"; + resets = <&rst NAND_RESET>, <&rst NAND_OCP_RESET>; + status = "disabled"; + }; + ocram: sram@ffe00000 { compatible = "mmio-sram"; reg = <0xffe00000 0x100000>; @@ -324,6 +340,8 @@ #dma-requests = <32>; clocks = <&clkmgr STRATIX10_L4_MAIN_CLK>; clock-names = "apb_pclk"; + resets = <&rst DMA_RESET>, <&rst DMA_OCP_RESET>; + reset-names = "dma", "dma-ocp"; }; rst: rstmgr@ffd11000 { @@ -539,6 +557,14 @@ interrupts = <16 4>; }; + ocram-ecc@ff8cc000 { + compatible = "altr,socfpga-s10-ocram-ecc", + "altr,socfpga-a10-ocram-ecc"; + reg = <0xff8cc000 0x100>; + altr,ecc-parent = <&ocram>; + interrupts = <1 4>; + }; + usb0-ecc@ff8c4000 { compatible = "altr,socfpga-s10-usb-ecc", "altr,socfpga-usb-ecc"; diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts index 84f9f5902e74..66e4ffb4e929 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts @@ -56,6 +56,17 @@ clock-frequency = <25000000>; }; }; + + eccmgr { + sdmmca-ecc@ff8c8c00 { + compatible = "altr,socfpga-s10-sdmmc-ecc", + "altr,socfpga-sdmmc-ecc"; + reg = <0xff8c8c00 0x100>; + altr,ecc-parent = <&mmc>; + interrupts = <14 4>, + <15 4>; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index e129c03ced14..84afecba9ec0 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -3,6 +3,9 @@ dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12a-sei510.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12a-x96-max.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-khadas-vim3.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-g12b-s922x-khadas-vim3.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nanopi-k2.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nexbox-a95x.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-odroidc2.dtb @@ -31,3 +34,5 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q201.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-rbox-pro.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts index 75fe1a2c49d0..4cd2d5951822 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts +++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts @@ -482,8 +482,8 @@ /* emmc storage */ &sd_emmc_c { - status = "disabled"; - pinctrl-0 = <&emmc_pins>; + status = "okay"; + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; pinctrl-1 = <&emmc_clk_gate_pins>; pinctrl-names = "default", "clk-gate"; diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi index 34704fecf756..82919b106010 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi @@ -171,15 +171,19 @@ ranges; ethmac: ethernet@ff3f0000 { - compatible = "amlogic,meson-axg-dwmac", "snps,dwmac"; - reg = <0x0 0xff3f0000 0x0 0x10000 - 0x0 0xff634540 0x0 0x8>; + compatible = "amlogic,meson-axg-dwmac", + "snps,dwmac-3.70a", + "snps,dwmac"; + reg = <0x0 0xff3f0000 0x0 0x10000>, + <0x0 0xff634540 0x0 0x8>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; clocks = <&clkc CLKID_ETH>, <&clkc CLKID_FCLK_DIV2>, <&clkc CLKID_MPLL2>; clock-names = "stmmaceth", "clkin0", "clkin1"; + rx-fifo-depth = <4096>; + tx-fifo-depth = <2048>; status = "disabled"; }; @@ -299,7 +303,7 @@ }; emmc_pins: emmc { - mux { + mux-0 { groups = "emmc_nand_d0", "emmc_nand_d1", "emmc_nand_d2", @@ -308,14 +312,26 @@ "emmc_nand_d5", "emmc_nand_d6", "emmc_nand_d7", - "emmc_clk", - "emmc_cmd", - "emmc_ds"; + "emmc_cmd"; + function = "emmc"; + bias-pull-up; + }; + + mux-1 { + groups = "emmc_clk"; function = "emmc"; bias-disable; }; }; + emmc_ds_pins: emmc_ds { + mux { + groups = "emmc_ds"; + function = "emmc"; + bias-pull-down; + }; + }; + emmc_clk_gate_pins: emmc_clk_gate { mux { groups = "BOOT_8"; @@ -559,13 +575,18 @@ }; sdio_pins: sdio { - mux { + mux-0 { groups = "sdio_d0", "sdio_d1", "sdio_d2", "sdio_d3", - "sdio_cmd", - "sdio_clk"; + "sdio_cmd"; + function = "sdio"; + bias-pull-up; + }; + + mux-1 { + groups = "sdio_clk"; function = "sdio"; bias-disable; }; @@ -1097,7 +1118,7 @@ }; mailbox: mailbox@ff63c404 { - compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu"; + compatible = "amlogic,meson-gxbb-mhu"; reg = <0 0xff63c404 0 0x4c>; interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 209 IRQ_TYPE_EDGE_RISING>, diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi new file mode 100644 index 000000000000..3f39e020f74e --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi @@ -0,0 +1,2435 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 Amlogic, Inc. All rights reserved. + */ + +#include <dt-bindings/phy/phy.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clock/axg-audio-clkc.h> +#include <dt-bindings/clock/g12a-clkc.h> +#include <dt-bindings/clock/g12a-aoclkc.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h> +#include <dt-bindings/reset/amlogic,meson-g12a-audio-reset.h> +#include <dt-bindings/reset/amlogic,meson-g12a-reset.h> + +/ { + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + tdmif_a: audio-controller-0 { + compatible = "amlogic,axg-tdm-iface"; + #sound-dai-cells = <0>; + sound-name-prefix = "TDM_A"; + clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>, + <&clkc_audio AUD_CLKID_MST_A_SCLK>, + <&clkc_audio AUD_CLKID_MST_A_LRCLK>; + clock-names = "mclk", "sclk", "lrclk"; + status = "disabled"; + }; + + tdmif_b: audio-controller-1 { + compatible = "amlogic,axg-tdm-iface"; + #sound-dai-cells = <0>; + sound-name-prefix = "TDM_B"; + clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>, + <&clkc_audio AUD_CLKID_MST_B_SCLK>, + <&clkc_audio AUD_CLKID_MST_B_LRCLK>; + clock-names = "mclk", "sclk", "lrclk"; + status = "disabled"; + }; + + tdmif_c: audio-controller-2 { + compatible = "amlogic,axg-tdm-iface"; + #sound-dai-cells = <0>; + sound-name-prefix = "TDM_C"; + clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>, + <&clkc_audio AUD_CLKID_MST_C_SCLK>, + <&clkc_audio AUD_CLKID_MST_C_LRCLK>; + clock-names = "mclk", "sclk", "lrclk"; + status = "disabled"; + }; + + efuse: efuse { + compatible = "amlogic,meson-gxbb-efuse"; + clocks = <&clkc CLKID_EFUSE>; + #address-cells = <1>; + #size-cells = <1>; + read-only; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* 3 MiB reserved for ARM Trusted Firmware (BL31) */ + secmon_reserved: secmon@5000000 { + reg = <0x0 0x05000000 0x0 0x300000>; + no-map; + }; + + linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x0 0x10000000>; + alignment = <0x0 0x400000>; + linux,cma-default; + }; + }; + + sm: secure-monitor { + compatible = "amlogic,meson-gxbb-sm"; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ethmac: ethernet@ff3f0000 { + compatible = "amlogic,meson-axg-dwmac", + "snps,dwmac-3.70a", + "snps,dwmac"; + reg = <0x0 0xff3f0000 0x0 0x10000>, + <0x0 0xff634540 0x0 0x8>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + clocks = <&clkc CLKID_ETH>, + <&clkc CLKID_FCLK_DIV2>, + <&clkc CLKID_MPLL2>; + clock-names = "stmmaceth", "clkin0", "clkin1"; + rx-fifo-depth = <4096>; + tx-fifo-depth = <2048>; + status = "disabled"; + + mdio0: mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + }; + }; + + apb: bus@ff600000 { + compatible = "simple-bus"; + reg = <0x0 0xff600000 0x0 0x200000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xff600000 0x0 0x200000>; + + hdmi_tx: hdmi-tx@0 { + compatible = "amlogic,meson-g12a-dw-hdmi"; + reg = <0x0 0x0 0x0 0x10000>; + interrupts = <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>; + resets = <&reset RESET_HDMITX_CAPB3>, + <&reset RESET_HDMITX_PHY>, + <&reset RESET_HDMITX>; + reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy"; + clocks = <&clkc CLKID_HDMI>, + <&clkc CLKID_HTX_PCLK>, + <&clkc CLKID_VPU_INTR>; + clock-names = "isfr", "iahb", "venci"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <0>; + status = "disabled"; + + /* VPU VENC Input */ + hdmi_tx_venc_port: port@0 { + reg = <0>; + + hdmi_tx_in: endpoint { + remote-endpoint = <&hdmi_tx_out>; + }; + }; + + /* TMDS Output */ + hdmi_tx_tmds_port: port@1 { + reg = <1>; + }; + }; + + apb_efuse: bus@30000 { + compatible = "simple-bus"; + reg = <0x0 0x30000 0x0 0x2000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x30000 0x0 0x2000>; + + hwrng: rng@218 { + compatible = "amlogic,meson-rng"; + reg = <0x0 0x218 0x0 0x4>; + }; + }; + + periphs: bus@34400 { + compatible = "simple-bus"; + reg = <0x0 0x34400 0x0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x34400 0x0 0x400>; + + periphs_pinctrl: pinctrl@40 { + compatible = "amlogic,meson-g12a-periphs-pinctrl"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio: bank@40 { + reg = <0x0 0x40 0x0 0x4c>, + <0x0 0xe8 0x0 0x18>, + <0x0 0x120 0x0 0x18>, + <0x0 0x2c0 0x0 0x40>, + <0x0 0x340 0x0 0x1c>; + reg-names = "gpio", + "pull", + "pull-enable", + "mux", + "ds"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 0 86>; + }; + + cec_ao_a_h_pins: cec_ao_a_h { + mux { + groups = "cec_ao_a_h"; + function = "cec_ao_a_h"; + bias-disable; + }; + }; + + cec_ao_b_h_pins: cec_ao_b_h { + mux { + groups = "cec_ao_b_h"; + function = "cec_ao_b_h"; + bias-disable; + }; + }; + + emmc_pins: emmc { + mux-0 { + groups = "emmc_nand_d0", + "emmc_nand_d1", + "emmc_nand_d2", + "emmc_nand_d3", + "emmc_nand_d4", + "emmc_nand_d5", + "emmc_nand_d6", + "emmc_nand_d7", + "emmc_cmd"; + function = "emmc"; + bias-pull-up; + drive-strength-microamp = <4000>; + }; + + mux-1 { + groups = "emmc_clk"; + function = "emmc"; + bias-disable; + drive-strength-microamp = <4000>; + }; + }; + + emmc_ds_pins: emmc-ds { + mux { + groups = "emmc_nand_ds"; + function = "emmc"; + bias-pull-down; + drive-strength-microamp = <4000>; + }; + }; + + emmc_clk_gate_pins: emmc_clk_gate { + mux { + groups = "BOOT_8"; + function = "gpio_periphs"; + bias-pull-down; + drive-strength-microamp = <4000>; + }; + }; + + hdmitx_ddc_pins: hdmitx_ddc { + mux { + groups = "hdmitx_sda", + "hdmitx_sck"; + function = "hdmitx"; + bias-disable; + drive-strength-microamp = <4000>; + }; + }; + + hdmitx_hpd_pins: hdmitx_hpd { + mux { + groups = "hdmitx_hpd_in"; + function = "hdmitx"; + bias-disable; + }; + }; + + + i2c0_sda_c_pins: i2c0-sda-c { + mux { + groups = "i2c0_sda_c"; + function = "i2c0"; + bias-disable; + drive-strength-microamp = <3000>; + + }; + }; + + i2c0_sck_c_pins: i2c0-sck-c { + mux { + groups = "i2c0_sck_c"; + function = "i2c0"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c0_sda_z0_pins: i2c0-sda-z0 { + mux { + groups = "i2c0_sda_z0"; + function = "i2c0"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c0_sck_z1_pins: i2c0-sck-z1 { + mux { + groups = "i2c0_sck_z1"; + function = "i2c0"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c0_sda_z7_pins: i2c0-sda-z7 { + mux { + groups = "i2c0_sda_z7"; + function = "i2c0"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c0_sda_z8_pins: i2c0-sda-z8 { + mux { + groups = "i2c0_sda_z8"; + function = "i2c0"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c1_sda_x_pins: i2c1-sda-x { + mux { + groups = "i2c1_sda_x"; + function = "i2c1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c1_sck_x_pins: i2c1-sck-x { + mux { + groups = "i2c1_sck_x"; + function = "i2c1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c1_sda_h2_pins: i2c1-sda-h2 { + mux { + groups = "i2c1_sda_h2"; + function = "i2c1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c1_sck_h3_pins: i2c1-sck-h3 { + mux { + groups = "i2c1_sck_h3"; + function = "i2c1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c1_sda_h6_pins: i2c1-sda-h6 { + mux { + groups = "i2c1_sda_h6"; + function = "i2c1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c1_sck_h7_pins: i2c1-sck-h7 { + mux { + groups = "i2c1_sck_h7"; + function = "i2c1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c2_sda_x_pins: i2c2-sda-x { + mux { + groups = "i2c2_sda_x"; + function = "i2c2"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c2_sck_x_pins: i2c2-sck-x { + mux { + groups = "i2c2_sck_x"; + function = "i2c2"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c2_sda_z_pins: i2c2-sda-z { + mux { + groups = "i2c2_sda_z"; + function = "i2c2"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c2_sck_z_pins: i2c2-sck-z { + mux { + groups = "i2c2_sck_z"; + function = "i2c2"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c3_sda_h_pins: i2c3-sda-h { + mux { + groups = "i2c3_sda_h"; + function = "i2c3"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c3_sck_h_pins: i2c3-sck-h { + mux { + groups = "i2c3_sck_h"; + function = "i2c3"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c3_sda_a_pins: i2c3-sda-a { + mux { + groups = "i2c3_sda_a"; + function = "i2c3"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c3_sck_a_pins: i2c3-sck-a { + mux { + groups = "i2c3_sck_a"; + function = "i2c3"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + mclk0_a_pins: mclk0-a { + mux { + groups = "mclk0_a"; + function = "mclk0"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + mclk1_a_pins: mclk1-a { + mux { + groups = "mclk1_a"; + function = "mclk1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + mclk1_x_pins: mclk1-x { + mux { + groups = "mclk1_x"; + function = "mclk1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + mclk1_z_pins: mclk1-z { + mux { + groups = "mclk1_z"; + function = "mclk1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + pdm_din0_a_pins: pdm-din0-a { + mux { + groups = "pdm_din0_a"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din0_c_pins: pdm-din0-c { + mux { + groups = "pdm_din0_c"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din0_x_pins: pdm-din0-x { + mux { + groups = "pdm_din0_x"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din0_z_pins: pdm-din0-z { + mux { + groups = "pdm_din0_z"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din1_a_pins: pdm-din1-a { + mux { + groups = "pdm_din1_a"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din1_c_pins: pdm-din1-c { + mux { + groups = "pdm_din1_c"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din1_x_pins: pdm-din1-x { + mux { + groups = "pdm_din1_x"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din1_z_pins: pdm-din1-z { + mux { + groups = "pdm_din1_z"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din2_a_pins: pdm-din2-a { + mux { + groups = "pdm_din2_a"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din2_c_pins: pdm-din2-c { + mux { + groups = "pdm_din2_c"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din2_x_pins: pdm-din2-x { + mux { + groups = "pdm_din2_x"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din2_z_pins: pdm-din2-z { + mux { + groups = "pdm_din2_z"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din3_a_pins: pdm-din3-a { + mux { + groups = "pdm_din3_a"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din3_c_pins: pdm-din3-c { + mux { + groups = "pdm_din3_c"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din3_x_pins: pdm-din3-x { + mux { + groups = "pdm_din3_x"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din3_z_pins: pdm-din3-z { + mux { + groups = "pdm_din3_z"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_dclk_a_pins: pdm-dclk-a { + mux { + groups = "pdm_dclk_a"; + function = "pdm"; + bias-disable; + drive-strength-microamp = <500>; + }; + }; + + pdm_dclk_c_pins: pdm-dclk-c { + mux { + groups = "pdm_dclk_c"; + function = "pdm"; + bias-disable; + drive-strength-microamp = <500>; + }; + }; + + pdm_dclk_x_pins: pdm-dclk-x { + mux { + groups = "pdm_dclk_x"; + function = "pdm"; + bias-disable; + drive-strength-microamp = <500>; + }; + }; + + pdm_dclk_z_pins: pdm-dclk-z { + mux { + groups = "pdm_dclk_z"; + function = "pdm"; + bias-disable; + drive-strength-microamp = <500>; + }; + }; + + pwm_a_pins: pwm-a { + mux { + groups = "pwm_a"; + function = "pwm_a"; + bias-disable; + }; + }; + + pwm_b_x7_pins: pwm-b-x7 { + mux { + groups = "pwm_b_x7"; + function = "pwm_b"; + bias-disable; + }; + }; + + pwm_b_x19_pins: pwm-b-x19 { + mux { + groups = "pwm_b_x19"; + function = "pwm_b"; + bias-disable; + }; + }; + + pwm_c_c_pins: pwm-c-c { + mux { + groups = "pwm_c_c"; + function = "pwm_c"; + bias-disable; + }; + }; + + pwm_c_x5_pins: pwm-c-x5 { + mux { + groups = "pwm_c_x5"; + function = "pwm_c"; + bias-disable; + }; + }; + + pwm_c_x8_pins: pwm-c-x8 { + mux { + groups = "pwm_c_x8"; + function = "pwm_c"; + bias-disable; + }; + }; + + pwm_d_x3_pins: pwm-d-x3 { + mux { + groups = "pwm_d_x3"; + function = "pwm_d"; + bias-disable; + }; + }; + + pwm_d_x6_pins: pwm-d-x6 { + mux { + groups = "pwm_d_x6"; + function = "pwm_d"; + bias-disable; + }; + }; + + pwm_e_pins: pwm-e { + mux { + groups = "pwm_e"; + function = "pwm_e"; + bias-disable; + }; + }; + + pwm_f_x_pins: pwm-f-x { + mux { + groups = "pwm_f_x"; + function = "pwm_f"; + bias-disable; + }; + }; + + pwm_f_h_pins: pwm-f-h { + mux { + groups = "pwm_f_h"; + function = "pwm_f"; + bias-disable; + }; + }; + + sdcard_c_pins: sdcard_c { + mux-0 { + groups = "sdcard_d0_c", + "sdcard_d1_c", + "sdcard_d2_c", + "sdcard_d3_c", + "sdcard_cmd_c"; + function = "sdcard"; + bias-pull-up; + drive-strength-microamp = <4000>; + }; + + mux-1 { + groups = "sdcard_clk_c"; + function = "sdcard"; + bias-disable; + drive-strength-microamp = <4000>; + }; + }; + + sdcard_clk_gate_c_pins: sdcard_clk_gate_c { + mux { + groups = "GPIOC_4"; + function = "gpio_periphs"; + bias-pull-down; + drive-strength-microamp = <4000>; + }; + }; + + sdcard_z_pins: sdcard_z { + mux-0 { + groups = "sdcard_d0_z", + "sdcard_d1_z", + "sdcard_d2_z", + "sdcard_d3_z", + "sdcard_cmd_z"; + function = "sdcard"; + bias-pull-up; + drive-strength-microamp = <4000>; + }; + + mux-1 { + groups = "sdcard_clk_z"; + function = "sdcard"; + bias-disable; + drive-strength-microamp = <4000>; + }; + }; + + sdcard_clk_gate_z_pins: sdcard_clk_gate_z { + mux { + groups = "GPIOZ_6"; + function = "gpio_periphs"; + bias-pull-down; + drive-strength-microamp = <4000>; + }; + }; + + sdio_pins: sdio { + mux { + groups = "sdio_d0", + "sdio_d1", + "sdio_d2", + "sdio_d3", + "sdio_clk", + "sdio_cmd"; + function = "sdio"; + bias-disable; + drive-strength-microamp = <4000>; + }; + }; + + sdio_clk_gate_pins: sdio_clk_gate { + mux { + groups = "GPIOX_4"; + function = "gpio_periphs"; + bias-pull-down; + drive-strength-microamp = <4000>; + }; + }; + + spdif_in_a10_pins: spdif-in-a10 { + mux { + groups = "spdif_in_a10"; + function = "spdif_in"; + bias-disable; + }; + }; + + spdif_in_a12_pins: spdif-in-a12 { + mux { + groups = "spdif_in_a12"; + function = "spdif_in"; + bias-disable; + }; + }; + + spdif_in_h_pins: spdif-in-h { + mux { + groups = "spdif_in_h"; + function = "spdif_in"; + bias-disable; + }; + }; + + spdif_out_h_pins: spdif-out-h { + mux { + groups = "spdif_out_h"; + function = "spdif_out"; + drive-strength-microamp = <500>; + bias-disable; + }; + }; + + spdif_out_a11_pins: spdif-out-a11 { + mux { + groups = "spdif_out_a11"; + function = "spdif_out"; + drive-strength-microamp = <500>; + bias-disable; + }; + }; + + spdif_out_a13_pins: spdif-out-a13 { + mux { + groups = "spdif_out_a13"; + function = "spdif_out"; + drive-strength-microamp = <500>; + bias-disable; + }; + }; + + tdm_a_din0_pins: tdm-a-din0 { + mux { + groups = "tdm_a_din0"; + function = "tdm_a"; + bias-disable; + }; + }; + + + tdm_a_din1_pins: tdm-a-din1 { + mux { + groups = "tdm_a_din1"; + function = "tdm_a"; + bias-disable; + }; + }; + + tdm_a_dout0_pins: tdm-a-dout0 { + mux { + groups = "tdm_a_dout0"; + function = "tdm_a"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_a_dout1_pins: tdm-a-dout1 { + mux { + groups = "tdm_a_dout1"; + function = "tdm_a"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_a_fs_pins: tdm-a-fs { + mux { + groups = "tdm_a_fs"; + function = "tdm_a"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_a_sclk_pins: tdm-a-sclk { + mux { + groups = "tdm_a_sclk"; + function = "tdm_a"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_a_slv_fs_pins: tdm-a-slv-fs { + mux { + groups = "tdm_a_slv_fs"; + function = "tdm_a"; + bias-disable; + }; + }; + + + tdm_a_slv_sclk_pins: tdm-a-slv-sclk { + mux { + groups = "tdm_a_slv_sclk"; + function = "tdm_a"; + bias-disable; + }; + }; + + tdm_b_din0_pins: tdm-b-din0 { + mux { + groups = "tdm_b_din0"; + function = "tdm_b"; + bias-disable; + }; + }; + + tdm_b_din1_pins: tdm-b-din1 { + mux { + groups = "tdm_b_din1"; + function = "tdm_b"; + bias-disable; + }; + }; + + tdm_b_din2_pins: tdm-b-din2 { + mux { + groups = "tdm_b_din2"; + function = "tdm_b"; + bias-disable; + }; + }; + + tdm_b_din3_a_pins: tdm-b-din3-a { + mux { + groups = "tdm_b_din3_a"; + function = "tdm_b"; + bias-disable; + }; + }; + + tdm_b_din3_h_pins: tdm-b-din3-h { + mux { + groups = "tdm_b_din3_h"; + function = "tdm_b"; + bias-disable; + }; + }; + + tdm_b_dout0_pins: tdm-b-dout0 { + mux { + groups = "tdm_b_dout0"; + function = "tdm_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_b_dout1_pins: tdm-b-dout1 { + mux { + groups = "tdm_b_dout1"; + function = "tdm_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_b_dout2_pins: tdm-b-dout2 { + mux { + groups = "tdm_b_dout2"; + function = "tdm_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_b_dout3_a_pins: tdm-b-dout3-a { + mux { + groups = "tdm_b_dout3_a"; + function = "tdm_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_b_dout3_h_pins: tdm-b-dout3-h { + mux { + groups = "tdm_b_dout3_h"; + function = "tdm_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_b_fs_pins: tdm-b-fs { + mux { + groups = "tdm_b_fs"; + function = "tdm_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_b_sclk_pins: tdm-b-sclk { + mux { + groups = "tdm_b_sclk"; + function = "tdm_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_b_slv_fs_pins: tdm-b-slv-fs { + mux { + groups = "tdm_b_slv_fs"; + function = "tdm_b"; + bias-disable; + }; + }; + + tdm_b_slv_sclk_pins: tdm-b-slv-sclk { + mux { + groups = "tdm_b_slv_sclk"; + function = "tdm_b"; + bias-disable; + }; + }; + + tdm_c_din0_a_pins: tdm-c-din0-a { + mux { + groups = "tdm_c_din0_a"; + function = "tdm_c"; + bias-disable; + }; + }; + + tdm_c_din0_z_pins: tdm-c-din0-z { + mux { + groups = "tdm_c_din0_z"; + function = "tdm_c"; + bias-disable; + }; + }; + + tdm_c_din1_a_pins: tdm-c-din1-a { + mux { + groups = "tdm_c_din1_a"; + function = "tdm_c"; + bias-disable; + }; + }; + + tdm_c_din1_z_pins: tdm-c-din1-z { + mux { + groups = "tdm_c_din1_z"; + function = "tdm_c"; + bias-disable; + }; + }; + + tdm_c_din2_a_pins: tdm-c-din2-a { + mux { + groups = "tdm_c_din2_a"; + function = "tdm_c"; + bias-disable; + }; + }; + + eth_leds_pins: eth-leds { + mux { + groups = "eth_link_led", + "eth_act_led"; + function = "eth"; + bias-disable; + }; + }; + + eth_pins: eth { + mux { + groups = "eth_mdio", + "eth_mdc", + "eth_rgmii_rx_clk", + "eth_rx_dv", + "eth_rxd0", + "eth_rxd1", + "eth_txen", + "eth_txd0", + "eth_txd1"; + function = "eth"; + drive-strength-microamp = <4000>; + bias-disable; + }; + }; + + eth_rgmii_pins: eth-rgmii { + mux { + groups = "eth_rxd2_rgmii", + "eth_rxd3_rgmii", + "eth_rgmii_tx_clk", + "eth_txd2_rgmii", + "eth_txd3_rgmii"; + function = "eth"; + drive-strength-microamp = <4000>; + bias-disable; + }; + }; + + tdm_c_din2_z_pins: tdm-c-din2-z { + mux { + groups = "tdm_c_din2_z"; + function = "tdm_c"; + bias-disable; + }; + }; + + tdm_c_din3_a_pins: tdm-c-din3-a { + mux { + groups = "tdm_c_din3_a"; + function = "tdm_c"; + bias-disable; + }; + }; + + tdm_c_din3_z_pins: tdm-c-din3-z { + mux { + groups = "tdm_c_din3_z"; + function = "tdm_c"; + bias-disable; + }; + }; + + tdm_c_dout0_a_pins: tdm-c-dout0-a { + mux { + groups = "tdm_c_dout0_a"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_dout0_z_pins: tdm-c-dout0-z { + mux { + groups = "tdm_c_dout0_z"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_dout1_a_pins: tdm-c-dout1-a { + mux { + groups = "tdm_c_dout1_a"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_dout1_z_pins: tdm-c-dout1-z { + mux { + groups = "tdm_c_dout1_z"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_dout2_a_pins: tdm-c-dout2-a { + mux { + groups = "tdm_c_dout2_a"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_dout2_z_pins: tdm-c-dout2-z { + mux { + groups = "tdm_c_dout2_z"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_dout3_a_pins: tdm-c-dout3-a { + mux { + groups = "tdm_c_dout3_a"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_dout3_z_pins: tdm-c-dout3-z { + mux { + groups = "tdm_c_dout3_z"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_fs_a_pins: tdm-c-fs-a { + mux { + groups = "tdm_c_fs_a"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_fs_z_pins: tdm-c-fs-z { + mux { + groups = "tdm_c_fs_z"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_sclk_a_pins: tdm-c-sclk-a { + mux { + groups = "tdm_c_sclk_a"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_sclk_z_pins: tdm-c-sclk-z { + mux { + groups = "tdm_c_sclk_z"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_slv_fs_a_pins: tdm-c-slv-fs-a { + mux { + groups = "tdm_c_slv_fs_a"; + function = "tdm_c"; + bias-disable; + }; + }; + + tdm_c_slv_fs_z_pins: tdm-c-slv-fs-z { + mux { + groups = "tdm_c_slv_fs_z"; + function = "tdm_c"; + bias-disable; + }; + }; + + tdm_c_slv_sclk_a_pins: tdm-c-slv-sclk-a { + mux { + groups = "tdm_c_slv_sclk_a"; + function = "tdm_c"; + bias-disable; + }; + }; + + tdm_c_slv_sclk_z_pins: tdm-c-slv-sclk-z { + mux { + groups = "tdm_c_slv_sclk_z"; + function = "tdm_c"; + bias-disable; + }; + }; + + uart_a_pins: uart-a { + mux { + groups = "uart_a_tx", + "uart_a_rx"; + function = "uart_a"; + bias-disable; + }; + }; + + uart_a_cts_rts_pins: uart-a-cts-rts { + mux { + groups = "uart_a_cts", + "uart_a_rts"; + function = "uart_a"; + bias-disable; + }; + }; + + uart_b_pins: uart-b { + mux { + groups = "uart_b_tx", + "uart_b_rx"; + function = "uart_b"; + bias-disable; + }; + }; + + uart_c_pins: uart-c { + mux { + groups = "uart_c_tx", + "uart_c_rx"; + function = "uart_c"; + bias-disable; + }; + }; + + uart_c_cts_rts_pins: uart-c-cts-rts { + mux { + groups = "uart_c_cts", + "uart_c_rts"; + function = "uart_c"; + bias-disable; + }; + }; + }; + }; + + usb2_phy0: phy@36000 { + compatible = "amlogic,g12a-usb2-phy"; + reg = <0x0 0x36000 0x0 0x2000>; + clocks = <&xtal>; + clock-names = "xtal"; + resets = <&reset RESET_USB_PHY20>; + reset-names = "phy"; + #phy-cells = <0>; + }; + + dmc: bus@38000 { + compatible = "simple-bus"; + reg = <0x0 0x38000 0x0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x38000 0x0 0x400>; + + canvas: video-lut@48 { + compatible = "amlogic,canvas"; + reg = <0x0 0x48 0x0 0x14>; + }; + }; + + usb2_phy1: phy@3a000 { + compatible = "amlogic,g12a-usb2-phy"; + reg = <0x0 0x3a000 0x0 0x2000>; + clocks = <&xtal>; + clock-names = "xtal"; + resets = <&reset RESET_USB_PHY21>; + reset-names = "phy"; + #phy-cells = <0>; + }; + + hiu: bus@3c000 { + compatible = "simple-bus"; + reg = <0x0 0x3c000 0x0 0x1400>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x3c000 0x0 0x1400>; + + hhi: system-controller@0 { + compatible = "amlogic,meson-gx-hhi-sysctrl", + "simple-mfd", "syscon"; + reg = <0 0 0 0x400>; + + clkc: clock-controller { + compatible = "amlogic,g12a-clkc"; + #clock-cells = <1>; + clocks = <&xtal>; + clock-names = "xtal"; + }; + + pwrc: power-controller { + compatible = "amlogic,meson-g12a-pwrc"; + #power-domain-cells = <1>; + amlogic,ao-sysctrl = <&rti>; + resets = <&reset RESET_VIU>, + <&reset RESET_VENC>, + <&reset RESET_VCBUS>, + <&reset RESET_BT656>, + <&reset RESET_RDMA>, + <&reset RESET_VENCI>, + <&reset RESET_VENCP>, + <&reset RESET_VDAC>, + <&reset RESET_VDI6>, + <&reset RESET_VENCL>, + <&reset RESET_VID_LOCK>; + reset-names = "viu", "venc", "vcbus", "bt656", + "rdma", "venci", "vencp", "vdac", + "vdi6", "vencl", "vid_lock"; + clocks = <&clkc CLKID_VPU>, + <&clkc CLKID_VAPB>; + clock-names = "vpu", "vapb"; + /* + * VPU clocking is provided by two identical clock paths + * VPU_0 and VPU_1 muxed to a single clock by a glitch + * free mux to safely change frequency while running. + * Same for VAPB but with a final gate after the glitch free mux. + */ + assigned-clocks = <&clkc CLKID_VPU_0_SEL>, + <&clkc CLKID_VPU_0>, + <&clkc CLKID_VPU>, /* Glitch free mux */ + <&clkc CLKID_VAPB_0_SEL>, + <&clkc CLKID_VAPB_0>, + <&clkc CLKID_VAPB_SEL>; /* Glitch free mux */ + assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>, + <0>, /* Do Nothing */ + <&clkc CLKID_VPU_0>, + <&clkc CLKID_FCLK_DIV4>, + <0>, /* Do Nothing */ + <&clkc CLKID_VAPB_0>; + assigned-clock-rates = <0>, /* Do Nothing */ + <666666666>, + <0>, /* Do Nothing */ + <0>, /* Do Nothing */ + <250000000>, + <0>; /* Do Nothing */ + }; + }; + }; + + pdm: audio-controller@40000 { + compatible = "amlogic,g12a-pdm", + "amlogic,axg-pdm"; + reg = <0x0 0x40000 0x0 0x34>; + #sound-dai-cells = <0>; + sound-name-prefix = "PDM"; + clocks = <&clkc_audio AUD_CLKID_PDM>, + <&clkc_audio AUD_CLKID_PDM_DCLK>, + <&clkc_audio AUD_CLKID_PDM_SYSCLK>; + clock-names = "pclk", "dclk", "sysclk"; + status = "disabled"; + }; + + audio: bus@42000 { + compatible = "simple-bus"; + reg = <0x0 0x42000 0x0 0x2000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x42000 0x0 0x2000>; + + clkc_audio: clock-controller@0 { + status = "disabled"; + compatible = "amlogic,g12a-audio-clkc"; + reg = <0x0 0x0 0x0 0xb4>; + #clock-cells = <1>; + #reset-cells = <1>; + + clocks = <&clkc CLKID_AUDIO>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL3>, + <&clkc CLKID_HIFI_PLL>, + <&clkc CLKID_FCLK_DIV3>, + <&clkc CLKID_FCLK_DIV4>, + <&clkc CLKID_GP0_PLL>; + clock-names = "pclk", + "mst_in0", + "mst_in1", + "mst_in2", + "mst_in3", + "mst_in4", + "mst_in5", + "mst_in6", + "mst_in7"; + + resets = <&reset RESET_AUDIO>; + }; + + toddr_a: audio-controller@100 { + compatible = "amlogic,g12a-toddr", + "amlogic,axg-toddr"; + reg = <0x0 0x100 0x0 0x1c>; + #sound-dai-cells = <0>; + sound-name-prefix = "TODDR_A"; + interrupts = <GIC_SPI 148 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_TODDR_A>; + resets = <&arb AXG_ARB_TODDR_A>; + status = "disabled"; + }; + + toddr_b: audio-controller@140 { + compatible = "amlogic,g12a-toddr", + "amlogic,axg-toddr"; + reg = <0x0 0x140 0x0 0x1c>; + #sound-dai-cells = <0>; + sound-name-prefix = "TODDR_B"; + interrupts = <GIC_SPI 149 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_TODDR_B>; + resets = <&arb AXG_ARB_TODDR_B>; + status = "disabled"; + }; + + toddr_c: audio-controller@180 { + compatible = "amlogic,g12a-toddr", + "amlogic,axg-toddr"; + reg = <0x0 0x180 0x0 0x1c>; + #sound-dai-cells = <0>; + sound-name-prefix = "TODDR_C"; + interrupts = <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_TODDR_C>; + resets = <&arb AXG_ARB_TODDR_C>; + status = "disabled"; + }; + + frddr_a: audio-controller@1c0 { + compatible = "amlogic,g12a-frddr", + "amlogic,axg-frddr"; + reg = <0x0 0x1c0 0x0 0x1c>; + #sound-dai-cells = <0>; + sound-name-prefix = "FRDDR_A"; + interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_FRDDR_A>; + resets = <&arb AXG_ARB_FRDDR_A>; + status = "disabled"; + }; + + frddr_b: audio-controller@200 { + compatible = "amlogic,g12a-frddr", + "amlogic,axg-frddr"; + reg = <0x0 0x200 0x0 0x1c>; + #sound-dai-cells = <0>; + sound-name-prefix = "FRDDR_B"; + interrupts = <GIC_SPI 153 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_FRDDR_B>; + resets = <&arb AXG_ARB_FRDDR_B>; + status = "disabled"; + }; + + frddr_c: audio-controller@240 { + compatible = "amlogic,g12a-frddr", + "amlogic,axg-frddr"; + reg = <0x0 0x240 0x0 0x1c>; + #sound-dai-cells = <0>; + sound-name-prefix = "FRDDR_C"; + interrupts = <GIC_SPI 154 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_FRDDR_C>; + resets = <&arb AXG_ARB_FRDDR_C>; + status = "disabled"; + }; + + arb: reset-controller@280 { + status = "disabled"; + compatible = "amlogic,meson-axg-audio-arb"; + reg = <0x0 0x280 0x0 0x4>; + #reset-cells = <1>; + clocks = <&clkc_audio AUD_CLKID_DDR_ARB>; + }; + + tdmin_a: audio-controller@300 { + compatible = "amlogic,g12a-tdmin", + "amlogic,axg-tdmin"; + reg = <0x0 0x300 0x0 0x40>; + sound-name-prefix = "TDMIN_A"; + resets = <&clkc_audio AUD_RESET_TDMIN_A>; + clocks = <&clkc_audio AUD_CLKID_TDMIN_A>, + <&clkc_audio AUD_CLKID_TDMIN_A_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmin_b: audio-controller@340 { + compatible = "amlogic,g12a-tdmin", + "amlogic,axg-tdmin"; + reg = <0x0 0x340 0x0 0x40>; + sound-name-prefix = "TDMIN_B"; + resets = <&clkc_audio AUD_RESET_TDMIN_B>; + clocks = <&clkc_audio AUD_CLKID_TDMIN_B>, + <&clkc_audio AUD_CLKID_TDMIN_B_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmin_c: audio-controller@380 { + compatible = "amlogic,g12a-tdmin", + "amlogic,axg-tdmin"; + reg = <0x0 0x380 0x0 0x40>; + sound-name-prefix = "TDMIN_C"; + resets = <&clkc_audio AUD_RESET_TDMIN_C>; + clocks = <&clkc_audio AUD_CLKID_TDMIN_C>, + <&clkc_audio AUD_CLKID_TDMIN_C_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmin_lb: audio-controller@3c0 { + compatible = "amlogic,g12a-tdmin", + "amlogic,axg-tdmin"; + reg = <0x0 0x3c0 0x0 0x40>; + sound-name-prefix = "TDMIN_LB"; + resets = <&clkc_audio AUD_RESET_TDMIN_LB>; + clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>, + <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + spdifin: audio-controller@400 { + compatible = "amlogic,g12a-spdifin", + "amlogic,axg-spdifin"; + reg = <0x0 0x400 0x0 0x30>; + #sound-dai-cells = <0>; + sound-name-prefix = "SPDIFIN"; + interrupts = <GIC_SPI 151 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_SPDIFIN>, + <&clkc_audio AUD_CLKID_SPDIFIN_CLK>; + clock-names = "pclk", "refclk"; + status = "disabled"; + }; + + spdifout: audio-controller@480 { + compatible = "amlogic,g12a-spdifout", + "amlogic,axg-spdifout"; + reg = <0x0 0x480 0x0 0x50>; + #sound-dai-cells = <0>; + sound-name-prefix = "SPDIFOUT"; + clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>, + <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>; + clock-names = "pclk", "mclk"; + status = "disabled"; + }; + + tdmout_a: audio-controller@500 { + compatible = "amlogic,g12a-tdmout"; + reg = <0x0 0x500 0x0 0x40>; + sound-name-prefix = "TDMOUT_A"; + resets = <&clkc_audio AUD_RESET_TDMOUT_A>; + clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>, + <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmout_b: audio-controller@540 { + compatible = "amlogic,g12a-tdmout"; + reg = <0x0 0x540 0x0 0x40>; + sound-name-prefix = "TDMOUT_B"; + resets = <&clkc_audio AUD_RESET_TDMOUT_B>; + clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>, + <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmout_c: audio-controller@580 { + compatible = "amlogic,g12a-tdmout"; + reg = <0x0 0x580 0x0 0x40>; + sound-name-prefix = "TDMOUT_C"; + resets = <&clkc_audio AUD_RESET_TDMOUT_C>; + clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>, + <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + spdifout_b: audio-controller@680 { + compatible = "amlogic,g12a-spdifout", + "amlogic,axg-spdifout"; + reg = <0x0 0x680 0x0 0x50>; + #sound-dai-cells = <0>; + sound-name-prefix = "SPDIFOUT_B"; + clocks = <&clkc_audio AUD_CLKID_SPDIFOUT_B>, + <&clkc_audio AUD_CLKID_SPDIFOUT_B_CLK>; + clock-names = "pclk", "mclk"; + status = "disabled"; + }; + + tohdmitx: audio-controller@744 { + compatible = "amlogic,g12a-tohdmitx"; + reg = <0x0 0x744 0x0 0x4>; + #sound-dai-cells = <1>; + sound-name-prefix = "TOHDMITX"; + status = "disabled"; + }; + }; + + usb3_pcie_phy: phy@46000 { + compatible = "amlogic,g12a-usb3-pcie-phy"; + reg = <0x0 0x46000 0x0 0x2000>; + clocks = <&clkc CLKID_PCIE_PLL>; + clock-names = "ref_clk"; + resets = <&reset RESET_PCIE_PHY>; + reset-names = "phy"; + assigned-clocks = <&clkc CLKID_PCIE_PLL>; + assigned-clock-rates = <100000000>; + #phy-cells = <1>; + }; + + eth_phy: mdio-multiplexer@4c000 { + compatible = "amlogic,g12a-mdio-mux"; + reg = <0x0 0x4c000 0x0 0xa4>; + clocks = <&clkc CLKID_ETH_PHY>, + <&xtal>, + <&clkc CLKID_MPLL_50M>; + clock-names = "pclk", "clkin0", "clkin1"; + mdio-parent-bus = <&mdio0>; + #address-cells = <1>; + #size-cells = <0>; + + ext_mdio: mdio@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + int_mdio: mdio@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + internal_ephy: ethernet_phy@8 { + compatible = "ethernet-phy-id0180.3301", + "ethernet-phy-ieee802.3-c22"; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + reg = <8>; + max-speed = <100>; + }; + }; + }; + }; + + aobus: bus@ff800000 { + compatible = "simple-bus"; + reg = <0x0 0xff800000 0x0 0x100000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>; + + rti: sys-ctrl@0 { + compatible = "amlogic,meson-gx-ao-sysctrl", + "simple-mfd", "syscon"; + reg = <0x0 0x0 0x0 0x100>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x0 0x0 0x100>; + + clkc_AO: clock-controller { + compatible = "amlogic,meson-g12a-aoclkc"; + #clock-cells = <1>; + #reset-cells = <1>; + clocks = <&xtal>, <&clkc CLKID_CLK81>; + clock-names = "xtal", "mpeg-clk"; + }; + + ao_pinctrl: pinctrl@14 { + compatible = "amlogic,meson-g12a-aobus-pinctrl"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio_ao: bank@14 { + reg = <0x0 0x14 0x0 0x8>, + <0x0 0x1c 0x0 0x8>, + <0x0 0x24 0x0 0x14>; + reg-names = "mux", + "ds", + "gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&ao_pinctrl 0 0 15>; + }; + + i2c_ao_sck_pins: i2c_ao_sck_pins { + mux { + groups = "i2c_ao_sck"; + function = "i2c_ao"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c_ao_sda_pins: i2c_ao_sda { + mux { + groups = "i2c_ao_sda"; + function = "i2c_ao"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c_ao_sck_e_pins: i2c_ao_sck_e { + mux { + groups = "i2c_ao_sck_e"; + function = "i2c_ao"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c_ao_sda_e_pins: i2c_ao_sda_e { + mux { + groups = "i2c_ao_sda_e"; + function = "i2c_ao"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + mclk0_ao_pins: mclk0-ao { + mux { + groups = "mclk0_ao"; + function = "mclk0_ao"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_ao_b_din0_pins: tdm-ao-b-din0 { + mux { + groups = "tdm_ao_b_din0"; + function = "tdm_ao_b"; + bias-disable; + }; + }; + + spdif_ao_out_pins: spdif-ao-out { + mux { + groups = "spdif_ao_out"; + function = "spdif_ao_out"; + drive-strength-microamp = <500>; + bias-disable; + }; + }; + + tdm_ao_b_din1_pins: tdm-ao-b-din1 { + mux { + groups = "tdm_ao_b_din1"; + function = "tdm_ao_b"; + bias-disable; + }; + }; + + tdm_ao_b_din2_pins: tdm-ao-b-din2 { + mux { + groups = "tdm_ao_b_din2"; + function = "tdm_ao_b"; + bias-disable; + }; + }; + + tdm_ao_b_dout0_pins: tdm-ao-b-dout0 { + mux { + groups = "tdm_ao_b_dout0"; + function = "tdm_ao_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_ao_b_dout1_pins: tdm-ao-b-dout1 { + mux { + groups = "tdm_ao_b_dout1"; + function = "tdm_ao_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_ao_b_dout2_pins: tdm-ao-b-dout2 { + mux { + groups = "tdm_ao_b_dout2"; + function = "tdm_ao_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_ao_b_fs_pins: tdm-ao-b-fs { + mux { + groups = "tdm_ao_b_fs"; + function = "tdm_ao_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_ao_b_sclk_pins: tdm-ao-b-sclk { + mux { + groups = "tdm_ao_b_sclk"; + function = "tdm_ao_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_ao_b_slv_fs_pins: tdm-ao-b-slv-fs { + mux { + groups = "tdm_ao_b_slv_fs"; + function = "tdm_ao_b"; + bias-disable; + }; + }; + + tdm_ao_b_slv_sclk_pins: tdm-ao-b-slv-sclk { + mux { + groups = "tdm_ao_b_slv_sclk"; + function = "tdm_ao_b"; + bias-disable; + }; + }; + + uart_ao_a_pins: uart-a-ao { + mux { + groups = "uart_ao_a_tx", + "uart_ao_a_rx"; + function = "uart_ao_a"; + bias-disable; + }; + }; + + uart_ao_a_cts_rts_pins: uart-ao-a-cts-rts { + mux { + groups = "uart_ao_a_cts", + "uart_ao_a_rts"; + function = "uart_ao_a"; + bias-disable; + }; + }; + + pwm_a_e_pins: pwm-a-e { + mux { + groups = "pwm_a_e"; + function = "pwm_a_e"; + bias-disable; + }; + }; + + pwm_ao_a_pins: pwm-ao-a { + mux { + groups = "pwm_ao_a"; + function = "pwm_ao_a"; + bias-disable; + }; + }; + + pwm_ao_b_pins: pwm-ao-b { + mux { + groups = "pwm_ao_b"; + function = "pwm_ao_b"; + bias-disable; + }; + }; + + pwm_ao_c_4_pins: pwm-ao-c-4 { + mux { + groups = "pwm_ao_c_4"; + function = "pwm_ao_c"; + bias-disable; + }; + }; + + pwm_ao_c_6_pins: pwm-ao-c-6 { + mux { + groups = "pwm_ao_c_6"; + function = "pwm_ao_c"; + bias-disable; + }; + }; + + pwm_ao_d_5_pins: pwm-ao-d-5 { + mux { + groups = "pwm_ao_d_5"; + function = "pwm_ao_d"; + bias-disable; + }; + }; + + pwm_ao_d_10_pins: pwm-ao-d-10 { + mux { + groups = "pwm_ao_d_10"; + function = "pwm_ao_d"; + bias-disable; + }; + }; + + pwm_ao_d_e_pins: pwm-ao-d-e { + mux { + groups = "pwm_ao_d_e"; + function = "pwm_ao_d"; + }; + }; + + remote_input_ao_pins: remote-input-ao { + mux { + groups = "remote_ao_input"; + function = "remote_ao_input"; + bias-disable; + }; + }; + }; + }; + + vrtc: rtc@0a8 { + compatible = "amlogic,meson-vrtc"; + reg = <0x0 0x000a8 0x0 0x4>; + }; + + cec_AO: cec@100 { + compatible = "amlogic,meson-gx-ao-cec"; + reg = <0x0 0x00100 0x0 0x14>; + interrupts = <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_AO CLKID_AO_CEC>; + clock-names = "core"; + status = "disabled"; + }; + + sec_AO: ao-secure@140 { + compatible = "amlogic,meson-gx-ao-secure", "syscon"; + reg = <0x0 0x140 0x0 0x140>; + amlogic,has-chip-id; + }; + + cecb_AO: cec@280 { + compatible = "amlogic,meson-g12a-ao-cec"; + reg = <0x0 0x00280 0x0 0x1c>; + interrupts = <GIC_SPI 203 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_AO CLKID_AO_CTS_OSCIN>; + clock-names = "oscin"; + status = "disabled"; + }; + + pwm_AO_cd: pwm@2000 { + compatible = "amlogic,meson-g12a-ao-pwm-cd"; + reg = <0x0 0x2000 0x0 0x20>; + #pwm-cells = <3>; + status = "disabled"; + }; + + uart_AO: serial@3000 { + compatible = "amlogic,meson-gx-uart", + "amlogic,meson-ao-uart"; + reg = <0x0 0x3000 0x0 0x18>; + interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>, <&clkc_AO CLKID_AO_UART>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; + status = "disabled"; + }; + + uart_AO_B: serial@4000 { + compatible = "amlogic,meson-gx-uart", + "amlogic,meson-ao-uart"; + reg = <0x0 0x4000 0x0 0x18>; + interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; + status = "disabled"; + }; + + i2c_AO: i2c@5000 { + compatible = "amlogic,meson-axg-i2c"; + status = "disabled"; + reg = <0x0 0x05000 0x0 0x20>; + interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc CLKID_I2C>; + }; + + pwm_AO_ab: pwm@7000 { + compatible = "amlogic,meson-g12a-ao-pwm-ab"; + reg = <0x0 0x7000 0x0 0x20>; + #pwm-cells = <3>; + status = "disabled"; + }; + + ir: ir@8000 { + compatible = "amlogic,meson-gxbb-ir"; + reg = <0x0 0x8000 0x0 0x20>; + interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + + saradc: adc@9000 { + compatible = "amlogic,meson-g12a-saradc", + "amlogic,meson-saradc"; + reg = <0x0 0x9000 0x0 0x48>; + #io-channel-cells = <1>; + interrupts = <GIC_SPI 200 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>, + <&clkc_AO CLKID_AO_SAR_ADC>, + <&clkc_AO CLKID_AO_SAR_ADC_CLK>, + <&clkc_AO CLKID_AO_SAR_ADC_SEL>; + clock-names = "clkin", "core", "adc_clk", "adc_sel"; + status = "disabled"; + }; + }; + + vpu: vpu@ff900000 { + compatible = "amlogic,meson-g12a-vpu"; + reg = <0x0 0xff900000 0x0 0x100000>, + <0x0 0xff63c000 0x0 0x1000>; + reg-names = "vpu", "hhi"; + interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + amlogic,canvas = <&canvas>; + + /* CVBS VDAC output port */ + cvbs_vdac_port: port@0 { + reg = <0>; + }; + + /* HDMI-TX output port */ + hdmi_tx_port: port@1 { + reg = <1>; + + hdmi_tx_out: endpoint { + remote-endpoint = <&hdmi_tx_in>; + }; + }; + }; + + gic: interrupt-controller@ffc01000 { + compatible = "arm,gic-400"; + reg = <0x0 0xffc01000 0 0x1000>, + <0x0 0xffc02000 0 0x2000>, + <0x0 0xffc04000 0 0x2000>, + <0x0 0xffc06000 0 0x2000>; + interrupt-controller; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; + #interrupt-cells = <3>; + #address-cells = <0>; + }; + + cbus: bus@ffd00000 { + compatible = "simple-bus"; + reg = <0x0 0xffd00000 0x0 0x100000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x100000>; + + reset: reset-controller@1004 { + compatible = "amlogic,meson-axg-reset"; + reg = <0x0 0x1004 0x0 0x9c>; + #reset-cells = <1>; + }; + + gpio_intc: interrupt-controller@f080 { + compatible = "amlogic,meson-g12a-gpio-intc", + "amlogic,meson-gpio-intc"; + reg = <0x0 0xf080 0x0 0x10>; + interrupt-controller; + #interrupt-cells = <2>; + amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>; + }; + + pwm_ef: pwm@19000 { + compatible = "amlogic,meson-g12a-ee-pwm"; + reg = <0x0 0x19000 0x0 0x20>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm_cd: pwm@1a000 { + compatible = "amlogic,meson-g12a-ee-pwm"; + reg = <0x0 0x1a000 0x0 0x20>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm_ab: pwm@1b000 { + compatible = "amlogic,meson-g12a-ee-pwm"; + reg = <0x0 0x1b000 0x0 0x20>; + #pwm-cells = <3>; + status = "disabled"; + }; + + i2c3: i2c@1c000 { + compatible = "amlogic,meson-axg-i2c"; + status = "disabled"; + reg = <0x0 0x1c000 0x0 0x20>; + interrupts = <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc CLKID_I2C>; + }; + + i2c2: i2c@1d000 { + compatible = "amlogic,meson-axg-i2c"; + status = "disabled"; + reg = <0x0 0x1d000 0x0 0x20>; + interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc CLKID_I2C>; + }; + + i2c1: i2c@1e000 { + compatible = "amlogic,meson-axg-i2c"; + status = "disabled"; + reg = <0x0 0x1e000 0x0 0x20>; + interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc CLKID_I2C>; + }; + + i2c0: i2c@1f000 { + compatible = "amlogic,meson-axg-i2c"; + status = "disabled"; + reg = <0x0 0x1f000 0x0 0x20>; + interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc CLKID_I2C>; + }; + + clk_msr: clock-measure@18000 { + compatible = "amlogic,meson-g12a-clk-measure"; + reg = <0x0 0x18000 0x0 0x10>; + }; + + uart_C: serial@22000 { + compatible = "amlogic,meson-gx-uart"; + reg = <0x0 0x22000 0x0 0x18>; + interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>, <&clkc CLKID_UART2>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; + status = "disabled"; + }; + + uart_B: serial@23000 { + compatible = "amlogic,meson-gx-uart"; + reg = <0x0 0x23000 0x0 0x18>; + interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; + status = "disabled"; + }; + + uart_A: serial@24000 { + compatible = "amlogic,meson-gx-uart"; + reg = <0x0 0x24000 0x0 0x18>; + interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; + status = "disabled"; + }; + }; + + sd_emmc_a: sd@ffe03000 { + compatible = "amlogic,meson-axg-mmc"; + reg = <0x0 0xffe03000 0x0 0x800>; + interrupts = <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + clocks = <&clkc CLKID_SD_EMMC_A>, + <&clkc CLKID_SD_EMMC_A_CLK0>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; + resets = <&reset RESET_SD_EMMC_A>; + }; + + sd_emmc_b: sd@ffe05000 { + compatible = "amlogic,meson-axg-mmc"; + reg = <0x0 0xffe05000 0x0 0x800>; + interrupts = <GIC_SPI 190 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + clocks = <&clkc CLKID_SD_EMMC_B>, + <&clkc CLKID_SD_EMMC_B_CLK0>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; + resets = <&reset RESET_SD_EMMC_B>; + }; + + sd_emmc_c: mmc@ffe07000 { + compatible = "amlogic,meson-axg-mmc"; + reg = <0x0 0xffe07000 0x0 0x800>; + interrupts = <GIC_SPI 191 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + clocks = <&clkc CLKID_SD_EMMC_C>, + <&clkc CLKID_SD_EMMC_C_CLK0>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; + resets = <&reset RESET_SD_EMMC_C>; + }; + + usb: usb@ffe09000 { + status = "disabled"; + compatible = "amlogic,meson-g12a-usb-ctrl"; + reg = <0x0 0xffe09000 0x0 0xa0>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&clkc CLKID_USB>; + resets = <&reset RESET_USB>; + + dr_mode = "otg"; + + phys = <&usb2_phy0>, <&usb2_phy1>, + <&usb3_pcie_phy PHY_TYPE_USB3>; + phy-names = "usb2-phy0", "usb2-phy1", "usb3-phy0"; + + dwc2: usb@ff400000 { + compatible = "amlogic,meson-g12a-usb", "snps,dwc2"; + reg = <0x0 0xff400000 0x0 0x40000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc CLKID_USB1_DDR_BRIDGE>; + clock-names = "ddr"; + phys = <&usb2_phy1>; + phy-names = "usb2-phy"; + dr_mode = "peripheral"; + g-rx-fifo-size = <192>; + g-np-tx-fifo-size = <128>; + g-tx-fifo-size = <128 128 16 16 16>; + }; + + dwc3: usb@ff500000 { + compatible = "snps,dwc3"; + reg = <0x0 0xff500000 0x0 0x100000>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; + snps,dis_u2_susphy_quirk; + snps,quirk-frame-length-adjustment; + }; + }; + + mali: gpu@ffe40000 { + compatible = "amlogic,meson-g12a-mali", "arm,mali-bifrost"; + reg = <0x0 0xffe40000 0x0 0x40000>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gpu", "mmu", "job"; + clocks = <&clkc CLKID_MALI>; + resets = <&reset RESET_DVALIN_CAPB3>, <&reset RESET_DVALIN>; + + /* + * Mali clocking is provided by two identical clock paths + * MALI_0 and MALI_1 muxed to a single clock by a glitch + * free mux to safely change frequency while running. + */ + assigned-clocks = <&clkc CLKID_MALI_0_SEL>, + <&clkc CLKID_MALI_0>, + <&clkc CLKID_MALI>; /* Glitch free mux */ + assigned-clock-parents = <&clkc CLKID_FCLK_DIV2P5>, + <0>, /* Do Nothing */ + <&clkc CLKID_MALI_0>; + assigned-clock-rates = <0>, /* Do Nothing */ + <800000000>, + <0>; /* Do Nothing */ + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>; + arm,no-tick-in-suspend; + }; + + xtal: xtal-clk { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "xtal"; + #clock-cells = <0>; + }; + +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts index 34b40587e5ef..c9fa23a56562 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts @@ -9,15 +9,12 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/meson-g12a-gpio.h> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h> / { compatible = "seirobotics,sei510", "amlogic,g12a"; model = "SEI Robotics SEI510"; - aliases { - serial0 = &uart_AO; - }; - adc_keys { compatible = "adc-keys"; io-channels = <&saradc 0>; @@ -31,13 +28,25 @@ }; }; - ao_5v: regulator-ao_5v { - compatible = "regulator-fixed"; - regulator-name = "AO_5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&dc_in>; - regulator-always-on; + aliases { + serial0 = &uart_AO; + ethernet0 = ðmac; + }; + + mono_dac: audio-codec-0 { + compatible = "maxim,max98357a"; + #sound-dai-cells = <0>; + sound-name-prefix = "U16"; + sdmode-gpios = <&gpio GPIOX_8 GPIO_ACTIVE_HIGH>; + }; + + dmics: audio-codec-1 { + #sound-dai-cells = <0>; + compatible = "dmic-codec"; + num-channels = <2>; + wakeup-delay-ms = <50>; + status = "okay"; + sound-name-prefix = "MIC"; }; chosen { @@ -54,21 +63,9 @@ }; }; - dc_in: regulator-dc_in { - compatible = "regulator-fixed"; - regulator-name = "DC_IN"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; - - emmc_1v8: regulator-emmc_1v8 { - compatible = "regulator-fixed"; - regulator-name = "EMMC_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; }; hdmi-connector { @@ -87,12 +84,30 @@ reg = <0x0 0x0 0x0 0x40000000>; }; - reserved-memory { - /* TEE Reserved Memory */ - bl32_reserved: bl32@5000000 { - reg = <0x0 0x05300000 0x0 0x2000000>; - no-map; - }; + ao_5v: regulator-ao_5v { + compatible = "regulator-fixed"; + regulator-name = "AO_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_in>; + regulator-always-on; + }; + + dc_in: regulator-dc_in { + compatible = "regulator-fixed"; + regulator-name = "DC_IN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + emmc_1v8: regulator-emmc_1v8 { + compatible = "regulator-fixed"; + regulator-name = "EMMC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; }; vddao_3v3: regulator-vddao_3v3 { @@ -114,6 +129,25 @@ enable-active-high; }; + vddcpu: regulator-vddcpu { + /* + * SY8120B1ABC DC/DC Regulator. + */ + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU"; + regulator-min-microvolt = <721000>; + regulator-max-microvolt = <1022000>; + + vin-supply = <&dc_in>; + + pwms = <&pwm_AO_cd 1 1250 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + vddio_ao1v8: regulator-vddio_ao1v8 { compatible = "regulator-fixed"; regulator-name = "VDDIO_AO1V8"; @@ -122,6 +156,146 @@ vin-supply = <&vddao_3v3>; regulator-always-on; }; + + reserved-memory { + /* TEE Reserved Memory */ + bl32_reserved: bl32@5000000 { + reg = <0x0 0x05300000 0x0 0x2000000>; + no-map; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ + }; + + sound { + compatible = "amlogic,axg-sound-card"; + model = "G12A-SEI510"; + audio-aux-devs = <&tdmout_a>, <&tdmout_b>, + <&tdmin_a>, <&tdmin_b>; + audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0", + "TDMOUT_A IN 1", "FRDDR_B OUT 0", + "TDMOUT_A IN 2", "FRDDR_C OUT 0", + "TDM_A Playback", "TDMOUT_A OUT", + "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT", + "TODDR_A IN 4", "PDM Capture", + "TODDR_B IN 4", "PDM Capture", + "TODDR_C IN 4", "PDM Capture", + "TDMIN_A IN 0", "TDM_A Capture", + "TDMIN_A IN 3", "TDM_A Loopback", + "TDMIN_B IN 0", "TDM_A Capture", + "TDMIN_B IN 3", "TDM_A Loopback", + "TDMIN_A IN 1", "TDM_B Capture", + "TDMIN_A IN 4", "TDM_B Loopback", + "TDMIN_B IN 1", "TDM_B Capture", + "TDMIN_B IN 4", "TDM_B Loopback", + "TODDR_A IN 0", "TDMIN_A OUT", + "TODDR_B IN 0", "TDMIN_A OUT", + "TODDR_C IN 0", "TDMIN_A OUT", + "TODDR_A IN 1", "TDMIN_B OUT", + "TODDR_B IN 1", "TDMIN_B OUT", + "TODDR_C IN 1", "TDMIN_B OUT"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + dai-link-3 { + sound-dai = <&toddr_a>; + }; + + dai-link-4 { + sound-dai = <&toddr_b>; + }; + + dai-link-5 { + sound-dai = <&toddr_c>; + }; + + /* internal speaker interface */ + dai-link-6 { + sound-dai = <&tdmif_a>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&mono_dac>; + }; + + codec-1 { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>; + }; + }; + + /* 8ch hdmi interface */ + dai-link-7 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec@0 { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; + }; + }; + + /* internal digital mics */ + dai-link-8 { + sound-dai = <&pdm>; + + codec { + sound-dai = <&dmics>; + }; + }; + + /* hdmi glue */ + dai-link-9 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&arb { + status = "okay"; }; &cec_AO { @@ -138,27 +312,60 @@ hdmi-phandle = <&hdmi_tx>; }; +&clkc_audio { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu1 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu2 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu3 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + &cvbs_vdac_port { cvbs_vdac_out: endpoint { remote-endpoint = <&cvbs_connector_in>; }; }; -&saradc { +ðmac { status = "okay"; - vref-supply = <&vddio_ao1v8>; + phy-handle = <&internal_ephy>; + phy-mode = "rmii"; }; -&uart_A { +&frddr_a { status = "okay"; - pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; - pinctrl-names = "default"; - uart-has-rtscts; +}; - bluetooth { - compatible = "brcm,bcm43438-bt"; - shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; - }; +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; }; &hdmi_tx { @@ -173,6 +380,177 @@ }; }; +&i2c3 { + status = "okay"; + pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>; + pinctrl-names = "default"; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +&pwm_AO_cd { + pinctrl-0 = <&pwm_ao_d_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin1"; + status = "okay"; +}; + +&pwm_ef { + status = "okay"; + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin0"; +}; + +&pdm { + pinctrl-0 = <&pdm_din0_z_pins>, <&pdm_din1_z_pins>, + <&pdm_din2_z_pins>, <&pdm_din3_z_pins>, + <&pdm_dclk_z_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&saradc { + status = "okay"; + vref-supply = <&vddio_ao1v8>; +}; + +/* SDIO */ +&sd_emmc_a { + status = "okay"; + pinctrl-0 = <&sdio_pins>; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + #address-cells = <1>; + #size-cells = <0>; + + bus-width = <4>; + cap-sd-highspeed; + sd-uhs-sdr50; + max-frequency = <100000000>; + + non-removable; + disable-wp; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_ao1v8>; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_c_pins>; + pinctrl-1 = <&sdcard_clk_gate_c_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <50000000>; + disable-wp; + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddao_3v3>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + max-frequency = <200000000>; + non-removable; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&emmc_1v8>; +}; + +&tdmif_a { + pinctrl-0 = <&tdm_a_dout0_pins>, <&tdm_a_fs_pins>, <&tdm_a_sclk_pins>; + pinctrl-names = "default"; + status = "okay"; + + assigned-clocks = <&clkc_audio AUD_CLKID_TDM_SCLK_PAD0>, + <&clkc_audio AUD_CLKID_TDM_LRCLK_PAD0>; + assigned-clock-parents = <&clkc_audio AUD_CLKID_MST_A_SCLK>, + <&clkc_audio AUD_CLKID_MST_A_LRCLK>; + assigned-clock-rates = <0>, <0>; +}; + +&tdmif_b { + status = "okay"; +}; + +&tdmin_a { + status = "okay"; +}; + +&tdmin_b { + status = "okay"; +}; + +&tdmout_a { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +&toddr_a { + status = "okay"; +}; + +&toddr_b { + status = "okay"; +}; + +&toddr_c { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; + +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + clocks = <&wifi32k>; + clock-names = "lpo"; + vbat-supply = <&vddao_3v3>; + vddio-supply = <&vddio_ao1v8>; + }; +}; + &uart_AO { status = "okay"; pinctrl-0 = <&uart_ao_a_pins>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts index 0e8045b8a915..2a324f0136e3 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts @@ -15,14 +15,12 @@ aliases { serial0 = &uart_AO; + ethernet0 = ðmac; }; + chosen { stdout-path = "serial0:115200n8"; }; - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x40000000>; - }; cvbs-connector { compatible = "composite-video-connector"; @@ -34,13 +32,9 @@ }; }; - flash_1v8: regulator-flash_1v8 { - compatible = "regulator-fixed"; - regulator-name = "FLASH_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_3v3>; - regulator-always-on; + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; }; hdmi-connector { @@ -54,6 +48,20 @@ }; }; + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; + + flash_1v8: regulator-flash_1v8 { + compatible = "regulator-fixed"; + regulator-name = "FLASH_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-always-on; + }; + main_12v: regulator-main_12v { compatible = "regulator-fixed"; regulator-name = "12V"; @@ -62,6 +70,17 @@ regulator-always-on; }; + usb_pwr_en: regulator-usb_pwr_en { + compatible = "regulator-fixed"; + regulator-name = "USB_PWR_EN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_5v>; + + gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + vcc_1v8: regulator-vcc_1v8 { compatible = "regulator-fixed"; regulator-name = "VCC_1V8"; @@ -92,17 +111,6 @@ enable-active-high; }; - usb_pwr_en: regulator-usb_pwr_en { - compatible = "regulator-fixed"; - regulator-name = "USB_PWR_EN"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc_5v>; - - gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - vddao_1v8: regulator-vddao_1v8 { compatible = "regulator-fixed"; regulator-name = "VDDAO_1V8"; @@ -121,6 +129,24 @@ regulator-always-on; }; + vddcpu: regulator-vddcpu { + /* + * MP8756GD Regulator. + */ + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU"; + regulator-min-microvolt = <721000>; + regulator-max-microvolt = <1022000>; + + vin-supply = <&main_12v>; + + pwms = <&pwm_AO_cd 1 1250 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; }; &cec_AO { @@ -137,12 +163,46 @@ hdmi-phandle = <&hdmi_tx>; }; +&cpu0 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu1 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu2 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu3 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + &cvbs_vdac_port { cvbs_vdac_out: endpoint { remote-endpoint = <&cvbs_connector_in>; }; }; +ðmac { + status = "okay"; + phy-handle = <&internal_ephy>; + phy-mode = "rmii"; +}; + &hdmi_tx { status = "okay"; pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; @@ -156,6 +216,78 @@ }; }; +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +/* i2c Touch */ +&i2c0 { + status = "okay"; + pinctrl-0 = <&i2c0_sda_z0_pins>, <&i2c0_sck_z1_pins>; + pinctrl-names = "default"; +}; + +/* i2c CM */ +&i2c2 { + status = "okay"; + pinctrl-0 = <&i2c2_sda_z_pins>, <&i2c2_sck_z_pins>; + pinctrl-names = "default"; +}; + +/* i2c Audio */ +&i2c3 { + status = "okay"; + pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>; + pinctrl-names = "default"; +}; + +&pwm_AO_cd { + pinctrl-0 = <&pwm_ao_d_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin1"; + status = "okay"; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_c_pins>; + pinctrl-1 = <&sdcard_clk_gate_c_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <50000000>; + disable-wp; + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddao_3v3>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + max-frequency = <200000000>; + non-removable; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&flash_1v8>; +}; + &uart_AO { status = "okay"; pinctrl-0 = <&uart_ao_a_pins>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts index b3d913f28f12..17155fb73fce 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts @@ -8,14 +8,24 @@ #include "meson-g12a.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/gpio/meson-g12a-gpio.h> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h> / { - compatible = "amediatech,x96-max", "amlogic,u200", "amlogic,g12a"; + compatible = "amediatech,x96-max", "amlogic,g12a"; model = "Shenzhen Amediatech Technology Co., Ltd X96 Max"; aliases { serial0 = &uart_AO; + ethernet0 = ðmac; }; + + spdif_dit: audio-codec-1 { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + status = "okay"; + sound-name-prefix = "DIT"; + }; + chosen { stdout-path = "serial0:115200n8"; }; @@ -45,6 +55,18 @@ }; }; + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; + flash_1v8: regulator-flash_1v8 { compatible = "regulator-fixed"; regulator-name = "FLASH_1V8"; @@ -109,6 +131,113 @@ vin-supply = <&dc_in>; regulator-always-on; }; + + vddcpu: regulator-vddcpu { + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU"; + regulator-min-microvolt = <721000>; + regulator-max-microvolt = <1022000>; + + vin-supply = <&dc_in>; + + pwms = <&pwm_AO_cd 1 1250 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + + sound { + compatible = "amlogic,axg-sound-card"; + model = "G12A-X96-MAX"; + audio-aux-devs = <&tdmout_b>; + audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT", + "SPDIFOUT IN 0", "FRDDR_A OUT 3", + "SPDIFOUT IN 1", "FRDDR_B OUT 3", + "SPDIFOUT IN 2", "FRDDR_C OUT 3"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + /* 8ch hdmi interface */ + dai-link-3 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; + }; + }; + + /* spdif hdmi or toslink interface */ + dai-link-4 { + sound-dai = <&spdifout>; + + codec-0 { + sound-dai = <&spdif_dit>; + }; + + codec-1 { + sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_A>; + }; + }; + + /* spdif hdmi interface */ + dai-link-5 { + sound-dai = <&spdifout_b>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_B>; + }; + }; + + /* hdmi glue */ + dai-link-6 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ + }; +}; + +&arb { + status = "okay"; }; &cec_AO { @@ -125,12 +254,56 @@ hdmi-phandle = <&hdmi_tx>; }; +&clkc_audio { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu1 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu2 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu3 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + &cvbs_vdac_port { cvbs_vdac_out: endpoint { remote-endpoint = <&cvbs_connector_in>; }; }; +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + &hdmi_tx { status = "okay"; pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; @@ -144,6 +317,55 @@ }; }; +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; + linux,rc-map-name = "rc-x96max"; +}; + +&pwm_AO_cd { + pinctrl-0 = <&pwm_ao_d_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin1"; + status = "okay"; +}; + +&ext_mdio { + external_phy: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + max-speed = <1000>; + eee-broken-1000t; + + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + + interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_14 */ + interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +ðmac { + pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; + pinctrl-names = "default"; + status = "okay"; + phy-mode = "rgmii"; + phy-handle = <&external_phy>; + amlogic,tx-delay-ns = <2>; +}; + +&pwm_ef { + status = "okay"; + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin0"; +}; + &uart_A { status = "okay"; pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; @@ -153,6 +375,9 @@ bluetooth { compatible = "brcm,bcm43438-bt"; shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + clocks = <&wifi32k>; + clock-names = "lpo"; }; }; @@ -166,3 +391,88 @@ status = "okay"; dr_mode = "host"; }; + +/* SDIO */ +&sd_emmc_a { + status = "okay"; + pinctrl-0 = <&sdio_pins>; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + #address-cells = <1>; + #size-cells = <0>; + + bus-width = <4>; + cap-sd-highspeed; + sd-uhs-sdr50; + max-frequency = <100000000>; + + non-removable; + disable-wp; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddao_1v8>; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_c_pins>; + pinctrl-1 = <&sdcard_clk_gate_c_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <100000000>; + disable-wp; + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddao_3v3>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + max-frequency = <100000000>; + non-removable; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&flash_1v8>; +}; + +&spdifout { + pinctrl-0 = <&spdif_out_h_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&spdifout_b { + status = "okay"; +}; + +&tdmif_b { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi index 9f72396ba710..eb5d177d7a99 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi @@ -3,21 +3,12 @@ * Copyright (c) 2018 Amlogic, Inc. All rights reserved. */ -#include <dt-bindings/phy/phy.h> -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/clock/g12a-clkc.h> -#include <dt-bindings/clock/g12a-aoclkc.h> -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/reset/amlogic,meson-g12a-reset.h> +#include "meson-g12-common.dtsi" +#include <dt-bindings/power/meson-g12a-power.h> / { compatible = "amlogic,g12a"; - interrupt-parent = <&gic>; - #address-cells = <2>; - #size-cells = <2>; - cpus { #address-cells = <0x2>; #size-cells = <0x0>; @@ -59,599 +50,75 @@ }; }; - efuse: efuse { - compatible = "amlogic,meson-gxbb-efuse"; - clocks = <&clkc CLKID_EFUSE>; - #address-cells = <1>; - #size-cells = <1>; - read-only; - }; - - psci { - compatible = "arm,psci-1.0"; - method = "smc"; - }; - - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; + cpu_opp_table: opp-table { + compatible = "operating-points-v2"; + opp-shared; - /* 3 MiB reserved for ARM Trusted Firmware (BL31) */ - secmon_reserved: secmon@5000000 { - reg = <0x0 0x05000000 0x0 0x300000>; - no-map; + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + opp-microvolt = <731000>; }; - linux,cma { - compatible = "shared-dma-pool"; - reusable; - size = <0x0 0x10000000>; - alignment = <0x0 0x400000>; - linux,cma-default; + opp-250000000 { + opp-hz = /bits/ 64 <250000000>; + opp-microvolt = <731000>; }; - }; - - sm: secure-monitor { - compatible = "amlogic,meson-gxbb-sm"; - }; - - soc { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - apb: bus@ff600000 { - compatible = "simple-bus"; - reg = <0x0 0xff600000 0x0 0x200000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xff600000 0x0 0x200000>; - - hdmi_tx: hdmi-tx@0 { - compatible = "amlogic,meson-g12a-dw-hdmi"; - reg = <0x0 0x0 0x0 0x10000>; - interrupts = <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>; - resets = <&reset RESET_HDMITX_CAPB3>, - <&reset RESET_HDMITX_PHY>, - <&reset RESET_HDMITX>; - reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy"; - clocks = <&clkc CLKID_HDMI>, - <&clkc CLKID_HTX_PCLK>, - <&clkc CLKID_VPU_INTR>; - clock-names = "isfr", "iahb", "venci"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - /* VPU VENC Input */ - hdmi_tx_venc_port: port@0 { - reg = <0>; - - hdmi_tx_in: endpoint { - remote-endpoint = <&hdmi_tx_out>; - }; - }; - - /* TMDS Output */ - hdmi_tx_tmds_port: port@1 { - reg = <1>; - }; - }; - - periphs: bus@34400 { - compatible = "simple-bus"; - reg = <0x0 0x34400 0x0 0x400>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0x34400 0x0 0x400>; - - periphs_pinctrl: pinctrl@40 { - compatible = "amlogic,meson-g12a-periphs-pinctrl"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - gpio: bank@40 { - reg = <0x0 0x40 0x0 0x4c>, - <0x0 0xe8 0x0 0x18>, - <0x0 0x120 0x0 0x18>, - <0x0 0x2c0 0x0 0x40>, - <0x0 0x340 0x0 0x1c>; - reg-names = "gpio", - "pull", - "pull-enable", - "mux", - "ds"; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&periphs_pinctrl 0 0 86>; - }; - - cec_ao_a_h_pins: cec_ao_a_h { - mux { - groups = "cec_ao_a_h"; - function = "cec_ao_a_h"; - bias-disable; - }; - }; - - cec_ao_b_h_pins: cec_ao_b_h { - mux { - groups = "cec_ao_b_h"; - function = "cec_ao_b_h"; - bias-disable; - }; - }; - - hdmitx_ddc_pins: hdmitx_ddc { - mux { - groups = "hdmitx_sda", - "hdmitx_sck"; - function = "hdmitx"; - bias-disable; - }; - }; - - hdmitx_hpd_pins: hdmitx_hpd { - mux { - groups = "hdmitx_hpd_in"; - function = "hdmitx"; - bias-disable; - }; - }; - - uart_a_pins: uart-a { - mux { - groups = "uart_a_tx", - "uart_a_rx"; - function = "uart_a"; - bias-disable; - }; - }; - - uart_a_cts_rts_pins: uart-a-cts-rts { - mux { - groups = "uart_a_cts", - "uart_a_rts"; - function = "uart_a"; - bias-disable; - }; - }; - - uart_b_pins: uart-b { - mux { - groups = "uart_b_tx", - "uart_b_rx"; - function = "uart_b"; - bias-disable; - }; - }; - - uart_c_pins: uart-c { - mux { - groups = "uart_c_tx", - "uart_c_rx"; - function = "uart_c"; - bias-disable; - }; - }; - - uart_c_cts_rts_pins: uart-c-cts-rts { - mux { - groups = "uart_c_cts", - "uart_c_rts"; - function = "uart_c"; - bias-disable; - }; - }; - }; - }; - - usb2_phy0: phy@36000 { - compatible = "amlogic,g12a-usb2-phy"; - reg = <0x0 0x36000 0x0 0x2000>; - clocks = <&xtal>; - clock-names = "xtal"; - resets = <&reset RESET_USB_PHY20>; - reset-names = "phy"; - #phy-cells = <0>; - }; - - dmc: bus@38000 { - compatible = "simple-bus"; - reg = <0x0 0x38000 0x0 0x400>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0x38000 0x0 0x400>; - - canvas: video-lut@48 { - compatible = "amlogic,canvas"; - reg = <0x0 0x48 0x0 0x14>; - }; - }; - - usb2_phy1: phy@3a000 { - compatible = "amlogic,g12a-usb2-phy"; - reg = <0x0 0x3a000 0x0 0x2000>; - clocks = <&xtal>; - clock-names = "xtal"; - resets = <&reset RESET_USB_PHY21>; - reset-names = "phy"; - #phy-cells = <0>; - }; - - hiu: bus@3c000 { - compatible = "simple-bus"; - reg = <0x0 0x3c000 0x0 0x1400>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0x3c000 0x0 0x1400>; - - hhi: system-controller@0 { - compatible = "amlogic,meson-gx-hhi-sysctrl", - "simple-mfd", "syscon"; - reg = <0 0 0 0x400>; - - clkc: clock-controller { - compatible = "amlogic,g12a-clkc"; - #clock-cells = <1>; - clocks = <&xtal>; - clock-names = "xtal"; - }; - }; - }; - usb3_pcie_phy: phy@46000 { - compatible = "amlogic,g12a-usb3-pcie-phy"; - reg = <0x0 0x46000 0x0 0x2000>; - clocks = <&clkc CLKID_PCIE_PLL>; - clock-names = "ref_clk"; - resets = <&reset RESET_PCIE_PHY>; - reset-names = "phy"; - assigned-clocks = <&clkc CLKID_PCIE_PLL>; - assigned-clock-rates = <100000000>; - #phy-cells = <1>; - }; + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <731000>; }; - aobus: bus@ff800000 { - compatible = "simple-bus"; - reg = <0x0 0xff800000 0x0 0x100000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>; - - rti: sys-ctrl@0 { - compatible = "amlogic,meson-gx-ao-sysctrl", - "simple-mfd", "syscon"; - reg = <0x0 0x0 0x0 0x100>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0x0 0x0 0x100>; - - clkc_AO: clock-controller { - compatible = "amlogic,meson-g12a-aoclkc"; - #clock-cells = <1>; - #reset-cells = <1>; - clocks = <&xtal>, <&clkc CLKID_CLK81>; - clock-names = "xtal", "mpeg-clk"; - }; - - pwrc_vpu: power-controller-vpu { - compatible = "amlogic,meson-g12a-pwrc-vpu"; - #power-domain-cells = <0>; - amlogic,hhi-sysctrl = <&hhi>; - resets = <&reset RESET_VIU>, - <&reset RESET_VENC>, - <&reset RESET_VCBUS>, - <&reset RESET_BT656>, - <&reset RESET_RDMA>, - <&reset RESET_VENCI>, - <&reset RESET_VENCP>, - <&reset RESET_VDAC>, - <&reset RESET_VDI6>, - <&reset RESET_VENCL>, - <&reset RESET_VID_LOCK>; - clocks = <&clkc CLKID_VPU>, - <&clkc CLKID_VAPB>; - clock-names = "vpu", "vapb"; - /* - * VPU clocking is provided by two identical clock paths - * VPU_0 and VPU_1 muxed to a single clock by a glitch - * free mux to safely change frequency while running. - * Same for VAPB but with a final gate after the glitch free mux. - */ - assigned-clocks = <&clkc CLKID_VPU_0_SEL>, - <&clkc CLKID_VPU_0>, - <&clkc CLKID_VPU>, /* Glitch free mux */ - <&clkc CLKID_VAPB_0_SEL>, - <&clkc CLKID_VAPB_0>, - <&clkc CLKID_VAPB_SEL>; /* Glitch free mux */ - assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>, - <0>, /* Do Nothing */ - <&clkc CLKID_VPU_0>, - <&clkc CLKID_FCLK_DIV4>, - <0>, /* Do Nothing */ - <&clkc CLKID_VAPB_0>; - assigned-clock-rates = <0>, /* Do Nothing */ - <666666666>, - <0>, /* Do Nothing */ - <0>, /* Do Nothing */ - <250000000>, - <0>; /* Do Nothing */ - }; - - ao_pinctrl: pinctrl@14 { - compatible = "amlogic,meson-g12a-aobus-pinctrl"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - gpio_ao: bank@14 { - reg = <0x0 0x14 0x0 0x8>, - <0x0 0x1c 0x0 0x8>, - <0x0 0x24 0x0 0x14>; - reg-names = "mux", - "ds", - "gpio"; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&ao_pinctrl 0 0 15>; - }; - - uart_ao_a_pins: uart-a-ao { - mux { - groups = "uart_ao_a_tx", - "uart_ao_a_rx"; - function = "uart_ao_a"; - bias-disable; - }; - }; - - uart_ao_a_cts_rts_pins: uart-ao-a-cts-rts { - mux { - groups = "uart_ao_a_cts", - "uart_ao_a_rts"; - function = "uart_ao_a"; - bias-disable; - }; - }; - }; - }; - - cec_AO: cec@100 { - compatible = "amlogic,meson-gx-ao-cec"; - reg = <0x0 0x00100 0x0 0x14>; - interrupts = <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_AO CLKID_AO_CEC>; - clock-names = "core"; - status = "disabled"; - }; - - sec_AO: ao-secure@140 { - compatible = "amlogic,meson-gx-ao-secure", "syscon"; - reg = <0x0 0x140 0x0 0x140>; - amlogic,has-chip-id; - }; - - cecb_AO: cec@280 { - compatible = "amlogic,meson-g12a-ao-cec"; - reg = <0x0 0x00280 0x0 0x1c>; - interrupts = <GIC_SPI 203 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_AO CLKID_AO_CTS_OSCIN>; - clock-names = "oscin"; - status = "disabled"; - }; - - uart_AO: serial@3000 { - compatible = "amlogic,meson-gx-uart", - "amlogic,meson-ao-uart"; - reg = <0x0 0x3000 0x0 0x18>; - interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>, <&xtal>, <&xtal>; - clock-names = "xtal", "pclk", "baud"; - status = "disabled"; - }; - - uart_AO_B: serial@4000 { - compatible = "amlogic,meson-gx-uart", - "amlogic,meson-ao-uart"; - reg = <0x0 0x4000 0x0 0x18>; - interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>, <&xtal>, <&xtal>; - clock-names = "xtal", "pclk", "baud"; - status = "disabled"; - }; - - saradc: adc@9000 { - compatible = "amlogic,meson-g12a-saradc", - "amlogic,meson-saradc"; - reg = <0x0 0x9000 0x0 0x48>; - #io-channel-cells = <1>; - interrupts = <GIC_SPI 200 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>, - <&clkc_AO CLKID_AO_SAR_ADC>, - <&clkc_AO CLKID_AO_SAR_ADC_CLK>, - <&clkc_AO CLKID_AO_SAR_ADC_SEL>; - clock-names = "clkin", "core", "adc_clk", "adc_sel"; - status = "disabled"; - }; + opp-667000000 { + opp-hz = /bits/ 64 <666666666>; + opp-microvolt = <731000>; }; - vpu: vpu@ff900000 { - compatible = "amlogic,meson-g12a-vpu"; - reg = <0x0 0xff900000 0x0 0x100000>, - <0x0 0xff63c000 0x0 0x1000>; - reg-names = "vpu", "hhi"; - interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>; - #address-cells = <1>; - #size-cells = <0>; - amlogic,canvas = <&canvas>; - power-domains = <&pwrc_vpu>; - - /* CVBS VDAC output port */ - cvbs_vdac_port: port@0 { - reg = <0>; - }; - - /* HDMI-TX output port */ - hdmi_tx_port: port@1 { - reg = <1>; - - hdmi_tx_out: endpoint { - remote-endpoint = <&hdmi_tx_in>; - }; - }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <731000>; }; - gic: interrupt-controller@ffc01000 { - compatible = "arm,gic-400"; - reg = <0x0 0xffc01000 0 0x1000>, - <0x0 0xffc02000 0 0x2000>, - <0x0 0xffc04000 0 0x2000>, - <0x0 0xffc06000 0 0x2000>; - interrupt-controller; - interrupts = <GIC_PPI 9 - (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; - #interrupt-cells = <3>; - #address-cells = <0>; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <731000>; }; - cbus: bus@ffd00000 { - compatible = "simple-bus"; - reg = <0x0 0xffd00000 0x0 0x100000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x100000>; - - reset: reset-controller@1004 { - compatible = "amlogic,meson-g12a-reset", - "amlogic,meson-axg-reset"; - reg = <0x0 0x1004 0x0 0x9c>; - #reset-cells = <1>; - }; - - clk_msr: clock-measure@18000 { - compatible = "amlogic,meson-g12a-clk-measure"; - reg = <0x0 0x18000 0x0 0x10>; - }; - - uart_C: serial@22000 { - compatible = "amlogic,meson-gx-uart"; - reg = <0x0 0x22000 0x0 0x18>; - interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>, <&clkc CLKID_UART2>, <&xtal>; - clock-names = "xtal", "pclk", "baud"; - status = "disabled"; - }; - - uart_B: serial@23000 { - compatible = "amlogic,meson-gx-uart"; - reg = <0x0 0x23000 0x0 0x18>; - interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>; - clock-names = "xtal", "pclk", "baud"; - status = "disabled"; - }; - - uart_A: serial@24000 { - compatible = "amlogic,meson-gx-uart"; - reg = <0x0 0x24000 0x0 0x18>; - interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>; - clock-names = "xtal", "pclk", "baud"; - status = "disabled"; - }; + opp-1398000000 { + opp-hz = /bits/ 64 <1398000000>; + opp-microvolt = <761000>; }; - usb: usb@ffe09000 { - status = "disabled"; - compatible = "amlogic,meson-g12a-usb-ctrl"; - reg = <0x0 0xffe09000 0x0 0xa0>; - interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - clocks = <&clkc CLKID_USB>; - resets = <&reset RESET_USB>; - - dr_mode = "otg"; - - phys = <&usb2_phy0>, <&usb2_phy1>, - <&usb3_pcie_phy PHY_TYPE_USB3>; - phy-names = "usb2-phy0", "usb2-phy1", "usb3-phy0"; - - dwc2: usb@ff400000 { - compatible = "amlogic,meson-g12a-usb", "snps,dwc2"; - reg = <0x0 0xff400000 0x0 0x40000>; - interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clkc CLKID_USB1_DDR_BRIDGE>; - clock-names = "ddr"; - phys = <&usb2_phy1>; - dr_mode = "peripheral"; - g-rx-fifo-size = <192>; - g-np-tx-fifo-size = <128>; - g-tx-fifo-size = <128 128 16 16 16>; - }; + opp-1512000000 { + opp-hz = /bits/ 64 <1512000000>; + opp-microvolt = <791000>; + }; - dwc3: usb@ff500000 { - compatible = "snps,dwc3"; - reg = <0x0 0xff500000 0x0 0x100000>; - interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; - dr_mode = "host"; - snps,dis_u2_susphy_quirk; - snps,quirk-frame-length-adjustment; - }; + opp-1608000000 { + opp-hz = /bits/ 64 <1608000000>; + opp-microvolt = <831000>; }; - mali: gpu@ffe40000 { - compatible = "amlogic,meson-g12a-mali", "arm,mali-bifrost"; - reg = <0x0 0xffe40000 0x0 0x40000>; - interrupt-parent = <&gic>; - interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "gpu", "mmu", "job"; - clocks = <&clkc CLKID_MALI>; - resets = <&reset RESET_DVALIN_CAPB3>, <&reset RESET_DVALIN>; + opp-1704000000 { + opp-hz = /bits/ 64 <1704000000>; + opp-microvolt = <861000>; + }; - /* - * Mali clocking is provided by two identical clock paths - * MALI_0 and MALI_1 muxed to a single clock by a glitch - * free mux to safely change frequency while running. - */ - assigned-clocks = <&clkc CLKID_MALI_0_SEL>, - <&clkc CLKID_MALI_0>, - <&clkc CLKID_MALI>; /* Glitch free mux */ - assigned-clock-parents = <&clkc CLKID_FCLK_DIV2P5>, - <0>, /* Do Nothing */ - <&clkc CLKID_MALI_0>; - assigned-clock-rates = <0>, /* Do Nothing */ - <800000000>, - <0>; /* Do Nothing */ + opp-1800000000 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <981000>; }; }; +}; - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 - (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 - (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 - (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 - (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>; - }; +ðmac { + power-domains = <&pwrc PWRC_G12A_ETH_ID>; +}; - xtal: xtal-clk { - compatible = "fixed-clock"; - clock-frequency = <24000000>; - clock-output-names = "xtal"; - #clock-cells = <0>; - }; +&vpu { + power-domains = <&pwrc PWRC_G12A_VPU_ID>; +}; +&sd_emmc_a { + amlogic,dram-access-quirk; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts new file mode 100644 index 000000000000..3a6a1e0c1e32 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com> + */ + +/dts-v1/; + +#include "meson-g12b-a311d.dtsi" +#include "meson-khadas-vim3.dtsi" +#include "meson-g12b-khadas-vim3.dtsi" + +/ { + compatible = "khadas,vim3", "amlogic,a311d", "amlogic,g12b"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi new file mode 100644 index 000000000000..d61f43052a34 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi @@ -0,0 +1,149 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + */ + +#include "meson-g12b.dtsi" + +/ { + cpu_opp_table_0: opp-table-0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + opp-microvolt = <731000>; + }; + + opp-250000000 { + opp-hz = /bits/ 64 <250000000>; + opp-microvolt = <731000>; + }; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <731000>; + }; + + opp-667000000 { + opp-hz = /bits/ 64 <667000000>; + opp-microvolt = <731000>; + }; + + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <761000>; + }; + + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <781000>; + }; + + opp-1398000000 { + opp-hz = /bits/ 64 <1398000000>; + opp-microvolt = <811000>; + }; + + opp-1512000000 { + opp-hz = /bits/ 64 <1512000000>; + opp-microvolt = <861000>; + }; + + opp-1608000000 { + opp-hz = /bits/ 64 <1608000000>; + opp-microvolt = <901000>; + }; + + opp-1704000000 { + opp-hz = /bits/ 64 <1704000000>; + opp-microvolt = <951000>; + }; + + opp-1800000000 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <1001000>; + }; + }; + + cpub_opp_table_1: opp-table-1 { + compatible = "operating-points-v2"; + opp-shared; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + opp-microvolt = <731000>; + }; + + opp-250000000 { + opp-hz = /bits/ 64 <250000000>; + opp-microvolt = <731000>; + }; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <731000>; + }; + + opp-667000000 { + opp-hz = /bits/ 64 <667000000>; + opp-microvolt = <731000>; + }; + + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <731000>; + }; + + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <751000>; + }; + + opp-1398000000 { + opp-hz = /bits/ 64 <1398000000>; + opp-microvolt = <771000>; + }; + + opp-1512000000 { + opp-hz = /bits/ 64 <1512000000>; + opp-microvolt = <771000>; + }; + + opp-1608000000 { + opp-hz = /bits/ 64 <1608000000>; + opp-microvolt = <781000>; + }; + + opp-1704000000 { + opp-hz = /bits/ 64 <1704000000>; + opp-microvolt = <791000>; + }; + + opp-1800000000 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <831000>; + }; + + opp-1908000000 { + opp-hz = /bits/ 64 <1908000000>; + opp-microvolt = <861000>; + }; + + opp-2016000000 { + opp-hz = /bits/ 64 <2016000000>; + opp-microvolt = <911000>; + }; + + opp-2108000000 { + opp-hz = /bits/ 64 <2108000000>; + opp-microvolt = <951000>; + }; + + opp-2208000000 { + opp-hz = /bits/ 64 <2208000000>; + opp-microvolt = <1011000>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi new file mode 100644 index 000000000000..554863429aa6 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi @@ -0,0 +1,189 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com> + */ + +#include <dt-bindings/sound/meson-g12a-tohdmitx.h> + +/ { + vddcpu_a: regulator-vddcpu-a { + /* + * MP8756GD Regulator. + */ + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU_A"; + regulator-min-microvolt = <690000>; + regulator-max-microvolt = <1050000>; + + vin-supply = <&dc_in>; + + pwms = <&pwm_ab 0 1250 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + + vddcpu_b: regulator-vddcpu-b { + /* + * Silergy SY8030DEC Regulator. + */ + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU_B"; + regulator-min-microvolt = <690000>; + regulator-max-microvolt = <1050000>; + + vin-supply = <&vsys_3v3>; + + pwms = <&pwm_AO_cd 1 1250 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + + sound { + compatible = "amlogic,axg-sound-card"; + model = "G12A-KHADAS-VIM3"; + audio-aux-devs = <&tdmout_b>; + audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + /* 8ch hdmi interface */ + dai-link-3 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; + }; + }; + + /* hdmi glue */ + dai-link-4 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&arb { + status = "okay"; +}; + +&clkc_audio { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vddcpu_b>; + operating-points-v2 = <&cpu_opp_table_0>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu1 { + cpu-supply = <&vddcpu_b>; + operating-points-v2 = <&cpu_opp_table_0>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu100 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu101 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu102 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu103 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + +&pwm_ab { + pinctrl-0 = <&pwm_a_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin0"; + status = "okay"; +}; + +&pwm_AO_cd { + pinctrl-0 = <&pwm_ao_d_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin1"; + status = "okay"; +}; + +&tdmif_b { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts new file mode 100644 index 000000000000..42f15405750c --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts @@ -0,0 +1,484 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + */ + +/dts-v1/; + +#include "meson-g12b-s922x.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/meson-g12a-gpio.h> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h> + +/ { + compatible = "hardkernel,odroid-n2", "amlogic,g12b"; + model = "Hardkernel ODROID-N2"; + + aliases { + serial0 = &uart_AO; + ethernet0 = ðmac; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; + }; + + leds { + compatible = "gpio-leds"; + + blue { + label = "n2:blue"; + gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + tflash_vdd: regulator-tflash_vdd { + compatible = "regulator-fixed"; + + regulator-name = "TFLASH_VDD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio_ao GPIOAO_8 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + tf_io: gpio-regulator-tf_io { + compatible = "regulator-gpio"; + + regulator-name = "TF_IO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>; + gpios-states = <0>; + + states = <3300000 0>, + <1800000 1>; + }; + + flash_1v8: regulator-flash_1v8 { + compatible = "regulator-fixed"; + regulator-name = "FLASH_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-always-on; + }; + + main_12v: regulator-main_12v { + compatible = "regulator-fixed"; + regulator-name = "12V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + }; + + vcc_5v: regulator-vcc_5v { + compatible = "regulator-fixed"; + regulator-name = "5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <&main_12v>; + }; + + vcc_1v8: regulator-vcc_1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-always-on; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + /* FIXME: actually controlled by VDDCPU_B_EN */ + }; + + vddcpu_a: regulator-vddcpu-a { + /* + * MP8756GD Regulator. + */ + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU_A"; + regulator-min-microvolt = <721000>; + regulator-max-microvolt = <1022000>; + + vin-supply = <&main_12v>; + + pwms = <&pwm_ab 0 1250 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + + vddcpu_b: regulator-vddcpu-b { + /* + * Silergy SY8120B1ABC Regulator. + */ + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU_B"; + regulator-min-microvolt = <721000>; + regulator-max-microvolt = <1022000>; + + vin-supply = <&main_12v>; + + pwms = <&pwm_AO_cd 1 1250 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + + hub_5v: regulator-hub_5v { + compatible = "regulator-fixed"; + regulator-name = "HUB_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_5v>; + + /* Connected to the Hub CHIPENABLE, LOW sets low power state */ + gpio = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + usb_pwr_en: regulator-usb_pwr_en { + compatible = "regulator-fixed"; + regulator-name = "USB_PWR_EN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_5v>; + + /* Connected to the microUSB port power enable */ + gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vddao_1v8: regulator-vddao_1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&main_12v>; + regulator-always-on; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + + sound { + compatible = "amlogic,axg-sound-card"; + model = "G12A-ODROIDN2"; + audio-aux-devs = <&tdmout_b>; + audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + /* 8ch hdmi interface */ + dai-link-3 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; + }; + }; + + /* hdmi glue */ + dai-link-4 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&arb { + status = "okay"; +}; + +&cec_AO { + pinctrl-0 = <&cec_ao_a_h_pins>; + pinctrl-names = "default"; + status = "disabled"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cecb_AO { + pinctrl-0 = <&cec_ao_b_h_pins>; + pinctrl-names = "default"; + status = "okay"; + hdmi-phandle = <&hdmi_tx>; +}; + +&clkc_audio { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vddcpu_b>; + operating-points-v2 = <&cpu_opp_table_0>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu1 { + cpu-supply = <&vddcpu_b>; + operating-points-v2 = <&cpu_opp_table_0>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu100 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu101 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu102 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu103 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&ext_mdio { + external_phy: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + max-speed = <1000>; + + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + + interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_14 */ + interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +ðmac { + pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; + pinctrl-names = "default"; + status = "okay"; + phy-mode = "rgmii"; + phy-handle = <&external_phy>; + amlogic,tx-delay-ns = <2>; +}; + +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + +&gpio { + /* + * WARNING: The USB Hub on the Odroid-N2 needs a reset signal + * to be turned high in order to be detected by the USB Controller + * This signal should be handled by a USB specific power sequence + * in order to reset the Hub when USB bus is powered down. + */ + usb-hub { + gpio-hog; + gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "usb-hub-reset"; + }; +}; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; + pinctrl-names = "default"; + hdmi-supply = <&vcc_5v>; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; + linux,rc-map-name = "rc-odroid"; +}; + +&pwm_ab { + pinctrl-0 = <&pwm_a_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin0"; + status = "okay"; +}; + +&pwm_AO_cd { + pinctrl-0 = <&pwm_ao_d_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin1"; + status = "okay"; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_c_pins>; + pinctrl-1 = <&sdcard_clk_gate_c_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <50000000>; + disable-wp; + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&tflash_vdd>; + vqmmc-supply = <&tf_io>; + +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + max-frequency = <200000000>; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&flash_1v8>; +}; + +&tdmif_b { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +&usb { + status = "okay"; + vbus-supply = <&usb_pwr_en>; +}; + +&usb2_phy0 { + phy-supply = <&vcc_5v>; +}; + +&usb2_phy1 { + /* Enable the hub which is connected to this port */ + phy-supply = <&hub_5v>; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-s922x-khadas-vim3.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x-khadas-vim3.dts new file mode 100644 index 000000000000..b73deb282120 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x-khadas-vim3.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com> + */ + +/dts-v1/; + +#include "meson-g12b-s922x.dtsi" +#include "meson-khadas-vim3.dtsi" +#include "meson-g12b-khadas-vim3.dtsi" + +/ { + compatible = "khadas,vim3", "amlogic,s922x", "amlogic,g12b"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi new file mode 100644 index 000000000000..046cc332d07f --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi @@ -0,0 +1,124 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + */ + +#include "meson-g12b.dtsi" + +/ { + cpu_opp_table_0: opp-table-0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + opp-microvolt = <731000>; + }; + + opp-250000000 { + opp-hz = /bits/ 64 <250000000>; + opp-microvolt = <731000>; + }; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <731000>; + }; + + opp-667000000 { + opp-hz = /bits/ 64 <667000000>; + opp-microvolt = <731000>; + }; + + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <731000>; + }; + + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <731000>; + }; + + opp-1398000000 { + opp-hz = /bits/ 64 <1398000000>; + opp-microvolt = <761000>; + }; + + opp-1512000000 { + opp-hz = /bits/ 64 <1512000000>; + opp-microvolt = <791000>; + }; + + opp-1608000000 { + opp-hz = /bits/ 64 <1608000000>; + opp-microvolt = <831000>; + }; + + opp-1704000000 { + opp-hz = /bits/ 64 <1704000000>; + opp-microvolt = <861000>; + }; + + opp-1896000000 { + opp-hz = /bits/ 64 <1896000000>; + opp-microvolt = <981000>; + }; + }; + + cpub_opp_table_1: opp-table-1 { + compatible = "operating-points-v2"; + opp-shared; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + opp-microvolt = <751000>; + }; + + opp-250000000 { + opp-hz = /bits/ 64 <250000000>; + opp-microvolt = <751000>; + }; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <751000>; + }; + + opp-667000000 { + opp-hz = /bits/ 64 <667000000>; + opp-microvolt = <751000>; + }; + + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <771000>; + }; + + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <771000>; + }; + + opp-1398000000 { + opp-hz = /bits/ 64 <1398000000>; + opp-microvolt = <791000>; + }; + + opp-1512000000 { + opp-hz = /bits/ 64 <1512000000>; + opp-microvolt = <821000>; + }; + + opp-1608000000 { + opp-hz = /bits/ 64 <1608000000>; + opp-microvolt = <861000>; + }; + + opp-1704000000 { + opp-hz = /bits/ 64 <1704000000>; + opp-microvolt = <891000>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi new file mode 100644 index 000000000000..5628ccd54531 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi @@ -0,0 +1,115 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + */ + +#include "meson-g12-common.dtsi" +#include <dt-bindings/power/meson-g12a-power.h> + +/ { + compatible = "amlogic,g12b"; + + cpus { + #address-cells = <0x2>; + #size-cells = <0x0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + + core1 { + cpu = <&cpu1>; + }; + }; + + cluster1 { + core0 { + cpu = <&cpu100>; + }; + + core1 { + cpu = <&cpu101>; + }; + + core2 { + cpu = <&cpu102>; + }; + + core3 { + cpu = <&cpu103>; + }; + }; + }; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x1>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu100: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x0 0x100>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu101: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x0 0x101>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu102: cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x0 0x102>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu103: cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x0 0x103>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + l2: l2-cache0 { + compatible = "cache"; + }; + }; +}; + +&clkc { + compatible = "amlogic,g12b-clkc"; +}; + +ðmac { + power-domains = <&pwrc PWRC_G12A_ETH_ID>; +}; + +&vpu { + power-domains = <&pwrc PWRC_G12A_VPU_ID>; +}; + +&sd_emmc_a { + amlogic,dram-access-quirk; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi index 016641a41694..a9b778571cf5 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi @@ -164,7 +164,7 @@ bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + max-frequency = <50000000>; non-removable; disable-wp; @@ -184,7 +184,7 @@ bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + max-frequency = <50000000>; disable-wp; cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index 6772709b9e19..6733050d735f 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi @@ -220,7 +220,7 @@ }; reset: reset-controller@4404 { - compatible = "amlogic,meson-gx-reset", "amlogic,meson-gxbb-reset"; + compatible = "amlogic,meson-gxbb-reset"; reg = <0x0 0x04404 0x0 0x9c>; #reset-cells = <1>; }; @@ -317,7 +317,7 @@ }; spifc: spi@8c80 { - compatible = "amlogic,meson-gx-spifc", "amlogic,meson-gxbb-spifc"; + compatible = "amlogic,meson-gxbb-spifc"; reg = <0x0 0x08c80 0x0 0x80>; #address-cells = <1>; #size-cells = <0>; @@ -325,7 +325,7 @@ }; watchdog@98d0 { - compatible = "amlogic,meson-gx-wdt", "amlogic,meson-gxbb-wdt"; + compatible = "amlogic,meson-gxbb-wdt"; reg = <0x0 0x098d0 0x0 0x10>; clocks = <&xtal>; }; @@ -437,7 +437,21 @@ }; }; - periphs: periphs@c8834000 { + vdec: video-codec@c8820000 { + compatible = "amlogic,gx-vdec"; + reg = <0x0 0xc8820000 0x0 0x10000>, + <0x0 0xc110a580 0x0 0xe4>; + reg-names = "dos", "esparser"; + + interrupts = <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "vdec", "esparser"; + + amlogic,ao-sysctrl = <&sysctrl_AO>; + amlogic,canvas = <&canvas>; + }; + + periphs: bus@c8834000 { compatible = "simple-bus"; reg = <0x0 0xc8834000 0x0 0x2000>; #address-cells = <2>; @@ -476,7 +490,7 @@ }; mailbox: mailbox@404 { - compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu"; + compatible = "amlogic,meson-gxbb-mhu"; reg = <0 0x404 0 0x4c>; interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 209 IRQ_TYPE_EDGE_RISING>, @@ -486,11 +500,15 @@ }; ethmac: ethernet@c9410000 { - compatible = "amlogic,meson-gx-dwmac", "amlogic,meson-gxbb-dwmac", "snps,dwmac"; - reg = <0x0 0xc9410000 0x0 0x10000 - 0x0 0xc8834540 0x0 0x4>; + compatible = "amlogic,meson-gxbb-dwmac", + "snps,dwmac-3.70a", + "snps,dwmac"; + reg = <0x0 0xc9410000 0x0 0x10000>, + <0x0 0xc8834540 0x0 0x4>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; + rx-fifo-depth = <4096>; + tx-fifo-depth = <2048>; status = "disabled"; }; @@ -526,9 +544,8 @@ vpu: vpu@d0100000 { compatible = "amlogic,meson-gx-vpu"; reg = <0x0 0xd0100000 0x0 0x100000>, - <0x0 0xc883c000 0x0 0x1000>, - <0x0 0xc8838000 0x0 0x1000>; - reg-names = "vpu", "hhi", "dmc"; + <0x0 0xc883c000 0x0 0x1000>; + reg-names = "vpu", "hhi"; interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts index ade2ee09ae96..233eb1cd7967 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts @@ -10,6 +10,7 @@ / { compatible = "friendlyarm,nanopi-k2", "amlogic,meson-gxbb"; + model = "FriendlyARM NanoPi K2"; aliases { serial0 = &uart_AO; @@ -154,10 +155,6 @@ amlogic,tx-delay-ns = <2>; - snps,reset-gpio = <&gpio GPIOZ_14 0>; - snps,reset-delays-us = <0 10000 1000000>; - snps,reset-active-low; - mdio { compatible = "snps,dwmac-mdio"; #address-cells = <1>; @@ -166,6 +163,11 @@ eth_phy0: ethernet-phy@0 { /* Realtek RTL8211F (0x001cc916) */ reg = <0>; + + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio_intc>; /* MAC_INTR on GPIOZ_15 */ interrupts = <29 IRQ_TYPE_LEVEL_LOW>; @@ -273,7 +275,7 @@ bus-width = <4>; cap-sd-highspeed; - max-frequency = <200000000>; + max-frequency = <50000000>; non-removable; disable-wp; @@ -301,8 +303,8 @@ sd-uhs-sdr12; sd-uhs-sdr25; sd-uhs-sdr50; - sd-uhs-sdr104; - max-frequency = <200000000>; + sd-uhs-ddr50; + max-frequency = <100000000>; disable-wp; cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts index 25105ac96d55..afcf8a9f667b 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts @@ -75,8 +75,8 @@ gpios-states = <1>; /* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */ - states = <1800000 0 - 3300000 1>; + states = <1800000 0>, + <3300000 1>; }; vddio_boot: regulator-vddio_boot { @@ -162,10 +162,6 @@ phy-handle = <ð_phy0>; phy-mode = "rmii"; - snps,reset-gpio = <&gpio GPIOZ_14 0>; - snps,reset-delays-us = <0 10000 1000000>; - snps,reset-active-low; - mdio { compatible = "snps,dwmac-mdio"; #address-cells = <1>; @@ -174,6 +170,10 @@ eth_phy0: ethernet-phy@0 { /* IC Plus IP101GR (0x02430c54) */ reg = <0>; + + reset-assert-us = <10000>; + reset-deassert-us = <10000>; + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; }; }; }; @@ -235,7 +235,7 @@ bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + max-frequency = <50000000>; disable-wp; cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts index 1cc9dc68ef00..6039adda12ee 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts @@ -77,8 +77,8 @@ gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>; gpios-states = <0>; - states = <3300000 0 - 1800000 1>; + states = <3300000 0>, + <1800000 1>; }; vcc1v8: regulator-vcc1v8 { @@ -126,10 +126,6 @@ phy-handle = <ð_phy0>; phy-mode = "rgmii"; - snps,reset-gpio = <&gpio GPIOZ_14 0>; - snps,reset-delays-us = <0 10000 1000000>; - snps,reset-active-low; - amlogic,tx-delay-ns = <2>; mdio { @@ -140,6 +136,11 @@ eth_phy0: ethernet-phy@0 { /* Realtek RTL8211F (0x001cc916) */ reg = <0>; + + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio_intc>; /* MAC_INTR on GPIOZ_15 */ interrupts = <29 IRQ_TYPE_LEVEL_LOW>; @@ -255,6 +256,10 @@ bus-width = <4>; cap-sd-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-ddr50; max-frequency = <100000000>; disable-wp; @@ -272,7 +277,7 @@ pinctrl-names = "default", "clk-gate"; bus-width = <8>; - max-frequency = <100000000>; + max-frequency = <200000000>; non-removable; disable-wp; cap-mmc-highspeed; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts index 9d2406a7c4fa..3c93d1898b40 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts @@ -68,10 +68,6 @@ amlogic,tx-delay-ns = <2>; - snps,reset-gpio = <&gpio GPIOZ_14 0>; - snps,reset-delays-us = <0 10000 1000000>; - snps,reset-active-low; - mdio { compatible = "snps,dwmac-mdio"; #address-cells = <1>; @@ -80,6 +76,11 @@ eth_phy0: ethernet-phy@3 { /* Micrel KSZ9031 (0x00221620) */ reg = <3>; + + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio_intc>; /* MAC_INTR on GPIOZ_15 */ interrupts = <29 IRQ_TYPE_LEVEL_LOW>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts index 56e0dd1ff55c..150a82f3b2d7 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts @@ -21,6 +21,6 @@ phy-mode = "rmii"; snps,reset-gpio = <&gpio GPIOZ_14 0>; - snps,reset-delays-us = <0 10000 1000000>; + snps,reset-delays-us = <0>, <10000>, <1000000>; snps,reset-active-low; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi index 0be0f2a5d2fe..89f7b41b0e9e 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi @@ -46,8 +46,8 @@ gpios-states = <1>; /* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */ - states = <1800000 0 - 3300000 1>; + states = <1800000 0>, + <3300000 1>; regulator-settling-time-up-us = <10000>; regulator-settling-time-down-us = <150000>; @@ -165,7 +165,7 @@ bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + max-frequency = <50000000>; non-removable; disable-wp; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi index ad4d50bd9d77..43b11e3dfe11 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi @@ -28,10 +28,10 @@ }; }; - usb_vbus: regulator-usb0-vbus { + usb_pwr: regulator-usb-pwrs { compatible = "regulator-fixed"; - regulator-name = "USB0_VBUS"; + regulator-name = "USB_PWR"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; @@ -40,20 +40,34 @@ enable-active-high; }; - vcc_3v3: regulator-vcc_3v3 { + vddio_boot: regulator-vddio_boot { compatible = "regulator-fixed"; - regulator-name = "VCC_3V3"; + regulator-name = "VDDIO_BOOT"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - vcc_1v8: regulator-vcc_1v8 { + vddio_ao18: regulator-vddio_ao18 { compatible = "regulator-fixed"; - regulator-name = "VCC_1V8"; + regulator-name = "VDDIO_AO18"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + emmc_pwrseq: emmc-pwrseq { compatible = "mmc-pwrseq-emmc"; reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; @@ -66,15 +80,32 @@ pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + sdio_pwrseq: sdio-pwrseq { compatible = "mmc-pwrseq-simple"; - reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>, - <&gpio GPIOX_20 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; clocks = <&wifi32k>; clock-names = "ext_clock"; }; }; +&cec_AO { + status = "okay"; + pinctrl-0 = <&ao_cec_pins>; + pinctrl-names = "default"; + hdmi-phandle = <&hdmi_tx>; +}; + ðmac { status = "okay"; pinctrl-0 = <ð_rgmii_pins>; @@ -85,10 +116,6 @@ amlogic,tx-delay-ns = <2>; - snps,reset-gpio = <&gpio GPIOZ_14 0>; - snps,reset-delays-us = <0 10000 1000000>; - snps,reset-active-low; - mdio { compatible = "snps,dwmac-mdio"; #address-cells = <1>; @@ -97,10 +124,30 @@ eth_phy0: ethernet-phy@0 { /* Realtek RTL8211F (0x001cc916) */ reg = <0>; + + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; + + interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_15 */ + interrupts = <29 IRQ_TYPE_LEVEL_LOW>; }; }; }; +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; + pinctrl-names = "default"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + &ir { status = "okay"; pinctrl-0 = <&remote_input_ao_pins>; @@ -115,10 +162,15 @@ clock-names = "clkin0"; }; +&saradc { + status = "okay"; + vref-supply = <&vddio_ao18>; +}; + /* Wireless SDIO Module */ &sd_emmc_a { status = "okay"; - pinctrl-0 = <&sdio_pins &sdio_irq_pins>; + pinctrl-0 = <&sdio_pins>; pinctrl-1 = <&sdio_clk_gate_pins>; pinctrl-names = "default", "clk-gate"; #address-cells = <1>; @@ -126,15 +178,15 @@ bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + max-frequency = <50000000>; non-removable; disable-wp; mmc-pwrseq = <&sdio_pwrseq>; - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&vcc_1v8>; + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_boot>; brcmf: wifi@1 { reg = <1>; @@ -151,12 +203,13 @@ bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + max-frequency = <50000000>; disable-wp; cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; - vmmc-supply = <&vcc_3v3>; + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vcc_3v3>; }; /* eMMC */ @@ -176,9 +229,22 @@ mmc-pwrseq = <&emmc_pwrseq>; vmmc-supply = <&vcc_3v3>; - vmmcq-sumpply = <&vcc_1v8>; + vqmmc-supply = <&vddio_boot>; +}; + +/* This is connected to the Bluetooth module: */ +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>; + }; }; +/* This UART is brought out to the DB9 connector */ &uart_AO { status = "okay"; pinctrl-0 = <&uart_ao_a_pins>; @@ -187,7 +253,7 @@ &usb0_phy { status = "okay"; - phy-supply = <&usb_vbus>; + phy-supply = <&usb_pwr>; }; &usb1_phy { diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts index 2bfe69902552..83b985bb015e 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts @@ -12,3 +12,7 @@ compatible = "wetek,hub", "amlogic,meson-gxbb"; model = "WeTek Hub"; }; + +&ir { + linux,rc-map-name = "rc-wetek-hub"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts index 0038522315de..1d32d1f6d032 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts @@ -54,3 +54,7 @@ &usb1 { status = "okay"; }; + +&ir { + linux,rc-map-name = "rc-wetek-play2"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi index 2d2db783c44c..4c539881fbb7 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi @@ -59,6 +59,13 @@ regulator-max-microvolt = <3300000>; }; + vddio_ao18: regulator-vddio_ao18 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vcc_3v3: regulator-vcc_3v3 { compatible = "regulator-fixed"; regulator-name = "VCC_3V3"; @@ -130,10 +137,6 @@ amlogic,tx-delay-ns = <2>; - snps,reset-gpio = <&gpio GPIOZ_14 0>; - snps,reset-delays-us = <0 10000 1000000>; - snps,reset-active-low; - mdio { compatible = "snps,dwmac-mdio"; #address-cells = <1>; @@ -142,6 +145,10 @@ eth_phy0: ethernet-phy@0 { /* Realtek RTL8211F (0x001cc916) */ reg = <0>; + + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; }; }; }; @@ -172,6 +179,11 @@ clock-names = "clkin0"; }; +&saradc { + status = "okay"; + vref-supply = <&vddio_ao18>; +}; + /* Wireless SDIO Module */ &sd_emmc_a { status = "okay"; @@ -183,7 +195,7 @@ bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + max-frequency = <50000000>; non-removable; disable-wp; @@ -208,7 +220,7 @@ bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + max-frequency = <50000000>; disable-wp; cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; @@ -237,6 +249,19 @@ vqmmc-supply = <&vddio_boot>; }; +/* This is connected to the Bluetooth module: */ +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>; + }; +}; + /* This UART is brought out to the DB9 connector */ &uart_AO { status = "okay"; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi index a60d3652beee..0cb40326b0d3 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi @@ -381,10 +381,15 @@ }; emmc_pins: emmc { - mux { + mux-0 { groups = "emmc_nand_d07", - "emmc_cmd", - "emmc_clk"; + "emmc_cmd"; + function = "emmc"; + bias-pull-up; + }; + + mux-1 { + groups = "emmc_clk"; function = "emmc"; bias-disable; }; @@ -394,7 +399,7 @@ mux { groups = "emmc_ds"; function = "emmc"; - bias-disable; + bias-pull-down; }; }; @@ -436,13 +441,18 @@ }; sdcard_pins: sdcard { - mux { + mux-0 { groups = "sdcard_d0", "sdcard_d1", "sdcard_d2", "sdcard_d3", - "sdcard_cmd", - "sdcard_clk"; + "sdcard_cmd"; + function = "sdcard"; + bias-pull-up; + }; + + mux-1 { + groups = "sdcard_clk"; function = "sdcard"; bias-disable; }; @@ -457,13 +467,18 @@ }; sdio_pins: sdio { - mux { + mux-0 { groups = "sdio_d0", "sdio_d1", "sdio_d2", "sdio_d3", - "sdio_cmd", - "sdio_clk"; + "sdio_cmd"; + function = "sdio"; + bias-pull-up; + }; + + mux-1 { + groups = "sdio_clk"; function = "sdio"; bias-disable; }; @@ -830,3 +845,14 @@ compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu"; power-domains = <&pwrc_vpu>; }; + +&vdec { + compatible = "amlogic,gxbb-vdec", "amlogic,gx-vdec"; + clocks = <&clkc CLKID_DOS_PARSER>, + <&clkc CLKID_DOS>, + <&clkc CLKID_VDEC_1>, + <&clkc CLKID_VDEC_HEVC>; + clock-names = "dos_parser", "dos", "vdec_1", "vdec_hevc"; + resets = <&reset RESET_PARSER>; + reset-names = "esparser"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts index 70433e023fda..3a1484e5b8e1 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts @@ -160,7 +160,7 @@ bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + max-frequency = <50000000>; non-removable; disable-wp; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts index 0c8e8305b1f3..b08c4537f260 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts @@ -70,20 +70,21 @@ amlogic,tx-delay-ns = <2>; - /* External PHY reset is shared with internal PHY Led signals */ - snps,reset-gpio = <&gpio GPIOZ_14 0>; - snps,reset-delays-us = <0 10000 1000000>; - snps,reset-active-low; - /* External PHY is in RGMII */ phy-mode = "rgmii"; }; &external_mdio { external_phy: ethernet-phy@0 { - compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22"; + /* Realtek RTL8211F (0x001cc916) */ reg = <0>; max-speed = <1000>; + + /* External PHY reset is shared with internal PHY Led signal */ + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio_intc>; interrupts = <29 IRQ_TYPE_LEVEL_LOW>; eee-broken-1000t; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dts index 789c819c99c4..dd729ac2300d 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dts @@ -20,3 +20,7 @@ reg = <0x0 0x0 0x0 0x40000000>; /* 1 GiB or 2 GiB */ }; }; + +&ir { + linux,rc-map-name = "rc-tanix-tx3mini"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts index 796baea7a0bf..c8d74e61dec1 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts @@ -38,8 +38,8 @@ gpios-states = <1>; /* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */ - states = <1800000 0 - 3300000 1>; + states = <1800000 0>, + <3300000 1>; }; vddio_boot: regulator-vddio_boot { diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts index 5499e8de5c74..2a5cd303123d 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts @@ -110,7 +110,7 @@ }; &ir { - linux,rc-map-name = "rc-geekbox"; + linux,rc-map-name = "rc-khadas"; }; &gpio_ao { diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts index 255cede7b447..4b8ce738e213 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts @@ -115,11 +115,13 @@ regulator-max-microvolt = <1800000>; }; + /* This is provided by LDOs on the eMMC daugther card */ vddio_boot: regulator-vddio_boot { compatible = "regulator-fixed"; regulator-name = "VDDIO_BOOT"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; }; }; @@ -235,7 +237,7 @@ bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + max-frequency = <50000000>; disable-wp; cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; @@ -253,9 +255,9 @@ bus-width = <8>; cap-mmc-highspeed; - mmc-ddr-3_3v; - max-frequency = <50000000>; - non-removable; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + max-frequency = <200000000>; disable-wp; mmc-pwrseq = <&emmc_pwrseq>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts index 9cbdb85fb591..c433a031841f 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts @@ -38,8 +38,8 @@ gpios-states = <1>; /* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */ - states = <1800000 0 - 3300000 1>; + states = <1800000 0>, + <3300000 1>; }; vddio_boot: regulator-vddio_boot { @@ -180,7 +180,7 @@ bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + max-frequency = <50000000>; disable-wp; cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi index bc811a2faf42..e3c16f50814b 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi @@ -114,7 +114,7 @@ bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + max-frequency = <50000000>; non-removable; disable-wp; @@ -134,7 +134,7 @@ bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + max-frequency = <50000000>; disable-wp; cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi index 3093ae421b17..49ff0a7d0210 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi @@ -80,9 +80,6 @@ }; ðmac { - reg = <0x0 0xc9410000 0x0 0x10000 - 0x0 0xc8834540 0x0 0x4>; - clocks = <&clkc CLKID_ETH>, <&clkc CLKID_FCLK_DIV2>, <&clkc CLKID_MPLL2>; @@ -326,10 +323,15 @@ }; emmc_pins: emmc { - mux { + mux-0 { groups = "emmc_nand_d07", - "emmc_cmd", - "emmc_clk"; + "emmc_cmd"; + function = "emmc"; + bias-pull-up; + }; + + mux-1 { + groups = "emmc_clk"; function = "emmc"; bias-disable; }; @@ -339,7 +341,7 @@ mux { groups = "emmc_ds"; function = "emmc"; - bias-disable; + bias-pull-down; }; }; @@ -381,13 +383,18 @@ }; sdcard_pins: sdcard { - mux { + mux-0 { groups = "sdcard_d0", "sdcard_d1", "sdcard_d2", "sdcard_d3", - "sdcard_cmd", - "sdcard_clk"; + "sdcard_cmd"; + function = "sdcard"; + bias-pull-up; + }; + + mux-1 { + groups = "sdcard_clk"; function = "sdcard"; bias-disable; }; @@ -402,13 +409,18 @@ }; sdio_pins: sdio { - mux { + mux-0 { groups = "sdio_d0", "sdio_d1", "sdio_d2", "sdio_d3", - "sdio_cmd", - "sdio_clk"; + "sdio_cmd"; + function = "sdio"; + bias-pull-up; + }; + + mux-1 { + groups = "sdio_clk"; function = "sdio"; bias-disable; }; @@ -697,7 +709,7 @@ #size-cells = <0>; internal_phy: ethernet-phy@8 { - compatible = "ethernet-phy-id0181.4400", "ethernet-phy-ieee802.3-c22"; + compatible = "ethernet-phy-id0181.4400"; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; reg = <8>; max-speed = <100>; @@ -833,3 +845,14 @@ compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu"; power-domains = <&pwrc_vpu>; }; + +&vdec { + compatible = "amlogic,gxl-vdec", "amlogic,gx-vdec"; + clocks = <&clkc CLKID_DOS_PARSER>, + <&clkc CLKID_DOS>, + <&clkc CLKID_VDEC_1>, + <&clkc CLKID_VDEC_HEVC>; + clock-names = "dos_parser", "dos", "vdec_1", "vdec_hevc"; + resets = <&reset RESET_PARSER>; + reset-names = "esparser"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts index 3f086ed7de05..f25ddd18a607 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts @@ -18,7 +18,6 @@ aliases { serial0 = &uart_AO; - serial1 = &uart_A; serial2 = &uart_AO_B; }; @@ -63,11 +62,9 @@ gpio-keys-polled { compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; poll-interval = <100>; - button@0 { + power-button { label = "power"; linux,code = <KEY_POWER>; gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; @@ -242,11 +239,6 @@ amlogic,tx-delay-ns = <2>; - /* External PHY reset is shared with internal PHY Led signals */ - snps,reset-gpio = <&gpio GPIOZ_14 0>; - snps,reset-delays-us = <0 10000 1000000>; - snps,reset-active-low; - /* External PHY is in RGMII */ phy-mode = "rgmii"; @@ -257,6 +249,11 @@ external_phy: ethernet-phy@0 { /* Realtek RTL8211F (0x001cc916) */ reg = <0>; + + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio_intc>; /* MAC_INTR on GPIOZ_15 */ interrupts = <25 IRQ_TYPE_LEVEL_LOW>; @@ -302,7 +299,7 @@ status = "okay"; pinctrl-0 = <&remote_input_ao_pins>; pinctrl-names = "default"; - linux,rc-map-name = "rc-geekbox"; + linux,rc-map-name = "rc-khadas"; }; &pwm_AO_ab { @@ -324,12 +321,13 @@ &sd_emmc_a { status = "okay"; pinctrl-0 = <&sdio_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; #address-cells = <1>; #size-cells = <0>; bus-width = <4>; - max-frequency = <100000000>; + max-frequency = <50000000>; non-removable; disable-wp; @@ -349,11 +347,12 @@ &sd_emmc_b { status = "okay"; pinctrl-0 = <&sdcard_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdcard_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + max-frequency = <50000000>; disable-wp; cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; @@ -366,17 +365,16 @@ &sd_emmc_c { status = "okay"; pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; bus-width = <8>; - cap-sd-highspeed; cap-mmc-highspeed; max-frequency = <200000000>; non-removable; disable-wp; mmc-ddr-1_8v; mmc-hs200-1_8v; - mmc-hs400-1_8v; mmc-pwrseq = <&emmc_pwrseq>; vmmc-supply = <&vcc_3v3>; @@ -404,8 +402,14 @@ /* This one is connected to the Bluetooth module */ &uart_A { status = "okay"; - pinctrl-0 = <&uart_a_pins>; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + }; }; /* This is brought out on the Linux_RX (18) and Linux_TX (19) pins: */ diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts index 25f3b6b14043..c2bd4dbbf38c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts @@ -101,19 +101,19 @@ amlogic,tx-delay-ns = <2>; - snps,reset-gpio = <&gpio GPIOZ_14 0>; - snps,reset-delays-us = <0 10000 1000000>; - snps,reset-active-low; - /* External PHY is in RGMII */ phy-mode = "rgmii"; }; &external_mdio { external_phy: ethernet-phy@0 { - compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22"; + /* Realtek RTL8211F (0x001cc916) */ reg = <0>; max-speed = <1000>; + + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; }; }; @@ -144,7 +144,7 @@ bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + max-frequency = <50000000>; disable-wp; cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts index 73d656e4aade..ea45ae0c71b7 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts @@ -52,20 +52,21 @@ amlogic,tx-delay-ns = <2>; - /* External PHY reset is shared with internal PHY Led signals */ - snps,reset-gpio = <&gpio GPIOZ_14 0>; - snps,reset-delays-us = <0 10000 1000000>; - snps,reset-active-low; - /* External PHY is in RGMII */ phy-mode = "rgmii"; }; &external_mdio { external_phy: ethernet-phy@0 { - compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22"; + /* Realtek RTL8211F (0x001cc916) */ reg = <0>; max-speed = <1000>; + + /* External PHY reset is shared with internal PHY Led signal */ + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio_intc>; /* MAC_INTR on GPIOZ_15 */ interrupts = <25 IRQ_TYPE_LEVEL_LOW>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts index 7fa20a8ede17..5cd4d35006d0 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts @@ -101,10 +101,6 @@ /* Select external PHY by default */ phy-handle = <&external_phy>; - snps,reset-gpio = <&gpio GPIOZ_14 0>; - snps,reset-delays-us = <0 10000 1000000>; - snps,reset-active-low; - amlogic,tx-delay-ns = <2>; /* External PHY is in RGMII */ @@ -113,9 +109,13 @@ &external_mdio { external_phy: ethernet-phy@0 { - compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22"; + /* Realtek RTL8211F (0x001cc916) */ reg = <0>; max-speed = <1000>; + + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; }; }; @@ -143,7 +143,7 @@ bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + max-frequency = <50000000>; non-removable; disable-wp; @@ -167,7 +167,7 @@ bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + max-frequency = <50000000>; disable-wp; cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi index 7a85a82bf65d..a0e677d5a8f7 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi @@ -144,3 +144,7 @@ &dwc3 { phys = <&usb3_phy>, <&usb2_phy0>, <&usb2_phy1>, <&usb2_phy2>; }; + +&vdec { + compatible = "amlogic,gxm-vdec", "amlogic,gx-vdec"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi new file mode 100644 index 000000000000..8647da7d6609 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi @@ -0,0 +1,360 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com> + */ + +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/meson-g12a-gpio.h> + +/ { + model = "Khadas VIM3"; + + aliases { + serial0 = &uart_AO; + ethernet0 = ðmac; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 2>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1710000>; + + button-function { + label = "Function"; + linux,code = <KEY_FN>; + press-threshold-microvolt = <10000>; + }; + }; + + leds { + compatible = "gpio-leds"; + + white { + label = "vim3:white:sys"; + gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + + red { + label = "vim3:red"; + gpios = <&gpio_expander 5 GPIO_ACTIVE_LOW>; + }; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + power-button { + label = "power"; + linux,code = <KEY_POWER>; + gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_LOW>; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; + + dc_in: regulator-dc_in { + compatible = "regulator-fixed"; + regulator-name = "DC_IN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + vcc_5v: regulator-vcc_5v { + compatible = "regulator-fixed"; + regulator-name = "VCC_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_in>; + + gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; + enable-active-high; + }; + + vcc_1v8: regulator-vcc_1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-always-on; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vsys_3v3>; + regulator-always-on; + /* FIXME: actually controlled by VDDCPU_B_EN */ + }; + + vddao_1v8: regulator-vddao_1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vsys_3v3>; + regulator-always-on; + }; + + emmc_1v8: regulator-emmc_1v8 { + compatible = "regulator-fixed"; + regulator-name = "EMMC_AO1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-always-on; + }; + + vsys_3v3: regulator-vsys_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VSYS_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&dc_in>; + regulator-always-on; + }; + + usb_pwr: regulator-usb_pwr { + compatible = "regulator-fixed"; + regulator-name = "USB_PWR"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_5v>; + + gpio = <&gpio GPIOA_6 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ + }; +}; + +&cec_AO { + pinctrl-0 = <&cec_ao_a_h_pins>; + pinctrl-names = "default"; + status = "disabled"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cecb_AO { + pinctrl-0 = <&cec_ao_b_h_pins>; + pinctrl-names = "default"; + status = "okay"; + hdmi-phandle = <&hdmi_tx>; +}; + +&ext_mdio { + external_phy: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + max-speed = <1000>; + + interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_14 */ + interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +ðmac { + pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; + pinctrl-names = "default"; + status = "okay"; + phy-mode = "rgmii"; + phy-handle = <&external_phy>; + amlogic,tx-delay-ns = <2>; +}; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; + pinctrl-names = "default"; + hdmi-supply = <&vcc_5v>; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +&i2c_AO { + status = "okay"; + pinctrl-0 = <&i2c_ao_sck_pins>, <&i2c_ao_sda_pins>; + pinctrl-names = "default"; + + gpio_expander: gpio-controller@20 { + compatible = "ti,tca6408"; + reg = <0x20>; + vcc-supply = <&vcc_3v3>; + gpio-controller; + #gpio-cells = <2>; + }; + + rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + }; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; + linux,rc-map-name = "rc-khadas"; +}; + +&pwm_ef { + status = "okay"; + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; +}; + +&saradc { + status = "okay"; + vref-supply = <&vddao_1v8>; +}; + +/* SDIO */ +&sd_emmc_a { + status = "okay"; + pinctrl-0 = <&sdio_pins>; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + #address-cells = <1>; + #size-cells = <0>; + + bus-width = <4>; + cap-sd-highspeed; + sd-uhs-sdr50; + max-frequency = <100000000>; + + non-removable; + disable-wp; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vsys_3v3>; + vqmmc-supply = <&vddao_1v8>; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_c_pins>; + pinctrl-1 = <&sdcard_clk_gate_c_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <50000000>; + disable-wp; + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vsys_3v3>; + vqmmc-supply = <&vsys_3v3>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + max-frequency = <200000000>; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&emmc_1v8>; +}; + +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + clocks = <&wifi32k>; + clock-names = "lpo"; + }; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +&usb2_phy0 { + phy-supply = <&dc_in>; +}; + +&usb2_phy1 { + phy-supply = <&usb_pwr>; +}; + +&usb3_pcie_phy { + phy-supply = <&usb_pwr>; +}; + +&usb { + status = "okay"; + dr_mode = "peripheral"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts new file mode 100644 index 000000000000..5233bd7cacfb --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts @@ -0,0 +1,70 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + */ + +/dts-v1/; + +#include "meson-sm1.dtsi" +#include "meson-khadas-vim3.dtsi" + +/ { + compatible = "khadas,vim3l", "amlogic,sm1"; + model = "Khadas VIM3L"; + + vddcpu: regulator-vddcpu { + /* + * Silergy SY8030DEC Regulator. + */ + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU"; + regulator-min-microvolt = <690000>; + regulator-max-microvolt = <1050000>; + + vin-supply = <&vsys_3v3>; + + pwms = <&pwm_AO_cd 1 1250 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; +}; + +&cpu0 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu1 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU1_CLK>; + clock-latency = <50000>; +}; + +&cpu2 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU2_CLK>; + clock-latency = <50000>; +}; + +&cpu3 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU3_CLK>; + clock-latency = <50000>; +}; + +&pwm_AO_cd { + pinctrl-0 = <&pwm_ao_d_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin1"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts new file mode 100644 index 000000000000..3435aaa4e8db --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts @@ -0,0 +1,383 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre SAS. All rights reserved. + */ + +/dts-v1/; + +#include "meson-sm1.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/meson-g12a-gpio.h> + +/ { + compatible = "seirobotics,sei610", "amlogic,sm1"; + model = "SEI Robotics SEI610"; + + aliases { + serial0 = &uart_AO; + ethernet0 = ðmac; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; + }; + + gpio-keys { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + key1 { + label = "A"; + linux,code = <BTN_0>; + gpios = <&gpio GPIOH_6 GPIO_ACTIVE_LOW>; + }; + + key2 { + label = "B"; + linux,code = <BTN_1>; + gpios = <&gpio GPIOH_7 GPIO_ACTIVE_LOW>; + }; + + key3 { + label = "C"; + linux,code = <BTN_2>; + gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; + }; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + bluetooth { + label = "sei610:blue:bt"; + gpios = <&gpio GPIOC_7 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + default-state = "off"; + }; + }; + + pwmleds { + compatible = "pwm-leds"; + + power { + label = "sei610:red:power"; + pwms = <&pwm_AO_ab 0 30518 0>; + max-brightness = <255>; + linux,default-trigger = "default-on"; + active-low; + }; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; + + ao_5v: regulator-ao_5v { + compatible = "regulator-fixed"; + regulator-name = "AO_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_in>; + regulator-always-on; + }; + + dc_in: regulator-dc_in { + compatible = "regulator-fixed"; + regulator-name = "DC_IN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + emmc_1v8: regulator-emmc_1v8 { + compatible = "regulator-fixed"; + regulator-name = "EMMC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&dc_in>; + regulator-always-on; + }; + + /* Used by Tuner, RGB Led & IR Emitter LED array */ + vddao_3v3_t: regulator-vddao_3v3_t { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3_T"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; + enable-active-low; + regulator-always-on; + }; + + vddcpu: regulator-vddcpu { + /* + * SY8120B1ABC DC/DC Regulator. + */ + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU"; + regulator-min-microvolt = <690000>; + regulator-max-microvolt = <1050000>; + + vin-supply = <&dc_in>; + + pwms = <&pwm_AO_cd 1 1500 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + + vddio_ao1v8: regulator-vddio_ao1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + reserved-memory { + /* TEE Reserved Memory */ + bl32_reserved: bl32@5000000 { + reg = <0x0 0x05300000 0x0 0x2000000>; + no-map; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ + }; +}; + +&cec_AO { + pinctrl-0 = <&cec_ao_a_h_pins>; + pinctrl-names = "default"; + status = "disabled"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cecb_AO { + pinctrl-0 = <&cec_ao_b_h_pins>; + pinctrl-names = "default"; + status = "okay"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cpu0 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu1 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU1_CLK>; + clock-latency = <50000>; +}; + +&cpu2 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU2_CLK>; + clock-latency = <50000>; +}; + +&cpu3 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU3_CLK>; + clock-latency = <50000>; +}; + +ðmac { + status = "okay"; + phy-handle = <&internal_ephy>; + phy-mode = "rmii"; +}; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; + pinctrl-names = "default"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +&i2c3 { + status = "okay"; + pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>; + pinctrl-names = "default"; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +&pwm_AO_ab { + status = "okay"; + pinctrl-0 = <&pwm_ao_a_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin0"; +}; + +&pwm_AO_cd { + pinctrl-0 = <&pwm_ao_d_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin1"; + status = "okay"; +}; + +&pwm_ef { + status = "okay"; + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin0"; +}; + +&saradc { + status = "okay"; + vref-supply = <&vddio_ao1v8>; +}; + +/* SDIO */ +&sd_emmc_a { + status = "okay"; + pinctrl-0 = <&sdio_pins>; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + #address-cells = <1>; + #size-cells = <0>; + + bus-width = <4>; + cap-sd-highspeed; + sd-uhs-sdr50; + max-frequency = <100000000>; + + non-removable; + disable-wp; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_ao1v8>; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_c_pins>; + pinctrl-1 = <&sdcard_clk_gate_c_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <50000000>; + disable-wp; + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddao_3v3>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + max-frequency = <200000000>; + non-removable; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&emmc_1v8>; +}; + +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + clocks = <&wifi32k>; + clock-names = "lpo"; + vbat-supply = <&vddao_3v3>; + vddio-supply = <&vddio_ao1v8>; + }; +}; + +/* Exposed via the on-board USB to Serial FT232RL IC */ +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +&usb { + status = "okay"; + dr_mode = "otg"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi new file mode 100644 index 000000000000..521573f3a5ba --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi @@ -0,0 +1,147 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + */ + +#include "meson-g12-common.dtsi" +#include <dt-bindings/power/meson-sm1-power.h> + +/ { + compatible = "amlogic,sm1"; + + cpus { + #address-cells = <0x2>; + #size-cells = <0x0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x1>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x2>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x3>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + l2: l2-cache0 { + compatible = "cache"; + }; + }; + + cpu_opp_table: opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + opp-microvolt = <730000>; + }; + + opp-250000000 { + opp-hz = /bits/ 64 <250000000>; + opp-microvolt = <730000>; + }; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <730000>; + }; + + opp-667000000 { + opp-hz = /bits/ 64 <666666666>; + opp-microvolt = <750000>; + }; + + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <770000>; + }; + + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <780000>; + }; + + opp-1404000000 { + opp-hz = /bits/ 64 <1404000000>; + opp-microvolt = <790000>; + }; + + opp-1512000000 { + opp-hz = /bits/ 64 <1500000000>; + opp-microvolt = <800000>; + }; + + opp-1608000000 { + opp-hz = /bits/ 64 <1608000000>; + opp-microvolt = <810000>; + }; + + opp-1704000000 { + opp-hz = /bits/ 64 <1704000000>; + opp-microvolt = <850000>; + }; + + opp-1800000000 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <900000>; + }; + + opp-1908000000 { + opp-hz = /bits/ 64 <1908000000>; + opp-microvolt = <950000>; + }; + }; +}; + +&cecb_AO { + compatible = "amlogic,meson-sm1-ao-cec"; +}; + +&clk_msr { + compatible = "amlogic,meson-sm1-clk-measure"; +}; + + +&clkc { + compatible = "amlogic,sm1-clkc"; +}; + +ðmac { + power-domains = <&pwrc PWRC_SM1_ETH_ID>; +}; + +&pwrc { + compatible = "amlogic,meson-sm1-pwrc"; +}; + +&vpu { + power-domains = <&pwrc PWRC_SM1_VPU_ID>; +}; + +&usb { + power-domains = <&pwrc PWRC_SM1_USB_ID>; +}; diff --git a/arch/arm64/boot/dts/arm/fvp-base-revc.dts b/arch/arm64/boot/dts/arm/fvp-base-revc.dts index 687707020ec1..62ab0d54ff71 100644 --- a/arch/arm64/boot/dts/arm/fvp-base-revc.dts +++ b/arch/arm64/boot/dts/arm/fvp-base-revc.dts @@ -265,13 +265,5 @@ <0 0 42 &gic 0 0 GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, <0 0 43 &gic 0 0 GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, <0 0 44 &gic 0 0 GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; - - motherboard { - iofpga@3,00000000 { - clcd@1f0000 { - max-memory-bandwidth = <130000000>; /* 16bpp @ 63.5MHz */ - }; - }; - }; }; }; diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi index 7446e0dc154d..26a039a028b8 100644 --- a/arch/arm64/boot/dts/arm/juno-base.dtsi +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi @@ -150,7 +150,7 @@ /* main funnel on Juno r0, cssys0 funnel on Juno r1/r2 as per TRM*/ main_funnel: funnel@20040000 { - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0x20040000 0 0x1000>; clocks = <&soc_smc50mhz>; @@ -281,7 +281,7 @@ }; funnel@220c0000 { /* cluster0 funnel */ - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0x220c0000 0 0x1000>; clocks = <&soc_smc50mhz>; @@ -366,7 +366,7 @@ }; funnel@230c0000 { /* cluster1 funnel */ - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0x230c0000 0 0x1000>; clocks = <&soc_smc50mhz>; diff --git a/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi b/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi index cf285152deab..eda3d9e18af6 100644 --- a/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi +++ b/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 / { funnel@20130000 { /* cssys1 */ - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0x20130000 0 0x1000>; clocks = <&soc_smc50mhz>; @@ -47,7 +47,7 @@ }; funnel@20150000 { /* cssys2 */ - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0x20150000 0 0x1000>; clocks = <&soc_smc50mhz>; diff --git a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi index 1792b074e9a3..9f60dacb4f80 100644 --- a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi +++ b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi @@ -106,7 +106,6 @@ flash@0,00000000 { /* 2 * 32MiB NOR Flash memory mounted on CS0 */ compatible = "arm,vexpress-flash", "cfi-flash"; - linux,part-probe = "afs"; reg = <0 0x00000000 0x04000000>; bank-width = <4>; /* @@ -116,6 +115,9 @@ * flash hardware access is disabled by default. */ status = "disabled"; + partitions { + compatible = "arm,arm-firmware-suite"; + }; }; ethernet@2,00000000 { diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi index 454cf6c44c49..03a7bf079c8f 100644 --- a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi +++ b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi @@ -188,8 +188,6 @@ interrupts = <14>; clocks = <&v2m_oscclk1>, <&v2m_clk24mhz>; clock-names = "clcdclk", "apb_pclk"; - /* 800x600 16bpp @36MHz works fine */ - max-memory-bandwidth = <54000000>; memory-region = <&vram>; port { diff --git a/arch/arm64/boot/dts/bitmain/bm1880.dtsi b/arch/arm64/boot/dts/bitmain/bm1880.dtsi index 7726fd4c6be6..d65453f99a99 100644 --- a/arch/arm64/boot/dts/bitmain/bm1880.dtsi +++ b/arch/arm64/boot/dts/bitmain/bm1880.dtsi @@ -5,6 +5,7 @@ */ #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/reset/bitmain,bm1880-reset.h> / { compatible = "bitmain,bm1880"; @@ -88,9 +89,15 @@ #size-cells = <1>; ranges = <0x0 0x0 0x50010000 0x1000>; - pinctrl: pinctrl@50 { + pinctrl: pinctrl@400 { compatible = "bitmain,bm1880-pinctrl"; - reg = <0x50 0x4B0>; + reg = <0x400 0x120>; + }; + + rst: reset-controller@c00 { + compatible = "bitmain,bm1880-reset"; + reg = <0xc00 0x8>; + #reset-cells = <1>; }; }; @@ -154,6 +161,7 @@ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; + resets = <&rst BM1880_RST_UART0_1_CLK>; status = "disabled"; }; @@ -163,6 +171,7 @@ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; + resets = <&rst BM1880_RST_UART0_1_ACLK>; status = "disabled"; }; @@ -172,6 +181,7 @@ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; + resets = <&rst BM1880_RST_UART2_3_CLK>; status = "disabled"; }; @@ -181,6 +191,7 @@ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; + resets = <&rst BM1880_RST_UART2_3_ACLK>; status = "disabled"; }; }; diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi new file mode 100644 index 000000000000..55259f973b5a --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi @@ -0,0 +1,72 @@ +// SPDX-License-Identifier: (GPL-2.0 or BSD-3-Clause) +/* + *Copyright(c) 2018 Broadcom + */ + usb { + compatible = "simple-bus"; + dma-ranges; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x68500000 0x00400000>; + + usbphy0: usb-phy@0 { + compatible = "brcm,sr-usb-combo-phy"; + reg = <0x00000000 0x100>; + #phy-cells = <1>; + status = "disabled"; + }; + + xhci0: usb@1000 { + compatible = "generic-xhci"; + reg = <0x00001000 0x1000>; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usbphy0 1>, <&usbphy0 0>; + phy-names = "phy0", "phy1"; + dma-coherent; + status = "disabled"; + }; + + bdc0: usb@2000 { + compatible = "brcm,bdc-v0.16"; + reg = <0x00002000 0x1000>; + interrupts = <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usbphy0 0>, <&usbphy0 1>; + phy-names = "phy0", "phy1"; + dma-coherent; + status = "disabled"; + }; + + usbphy1: usb-phy@10000 { + compatible = "brcm,sr-usb-combo-phy"; + reg = <0x00010000 0x100>; + #phy-cells = <1>; + status = "disabled"; + }; + + usbphy2: usb-phy@20000 { + compatible = "brcm,sr-usb-hs-phy"; + reg = <0x00020000 0x100>; + #phy-cells = <0>; + status = "disabled"; + }; + + xhci1: usb@11000 { + compatible = "generic-xhci"; + reg = <0x00011000 0x1000>; + interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usbphy1 1>, <&usbphy2>, <&usbphy1 0>; + phy-names = "phy0", "phy1", "phy2"; + dma-coherent; + status = "disabled"; + }; + + bdc1: usb@21000 { + compatible = "brcm,bdc-v0.16"; + reg = <0x00021000 0x1000>; + interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usbphy2>; + phy-names = "phy0"; + dma-coherent; + status = "disabled"; + }; + }; diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi index 35c4670c00d1..71e2e34400d4 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi @@ -287,6 +287,7 @@ #include "stingray-fs4.dtsi" #include "stingray-sata.dtsi" #include "stingray-pcie.dtsi" + #include "stingray-usb.dtsi" hsls { compatible = "simple-bus"; @@ -612,4 +613,111 @@ status = "disabled"; }; }; + + tmons { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x8f100000 0x100>; + + tmon: tmon@0 { + compatible = "brcm,sr-thermal"; + reg = <0x0 0x40>; + brcm,tmon-mask = <0x3f>; + #thermal-sensor-cells = <1>; + }; + }; + + thermal-zones { + ihost0_thermal: ihost0-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + thermal-sensors = <&tmon 0>; + trips { + cpu-crit { + temperature = <105000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + ihost1_thermal: ihost1-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + thermal-sensors = <&tmon 1>; + trips { + cpu-crit { + temperature = <105000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + ihost2_thermal: ihost2-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + thermal-sensors = <&tmon 2>; + trips { + cpu-crit { + temperature = <105000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + ihost3_thermal: ihost3-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + thermal-sensors = <&tmon 3>; + trips { + cpu-crit { + temperature = <105000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + crmu_thermal: crmu-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + thermal-sensors = <&tmon 4>; + trips { + cpu-crit { + temperature = <105000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + nitro_thermal: nitro-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + thermal-sensors = <&tmon 5>; + trips { + cpu-crit { + temperature = <105000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; + + nic-hsls { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x0 0x7fffffff>; + + nic_i2c0: i2c@60826100 { + compatible = "brcm,iproc-nic-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x60826100 0x100>, + <0x60e00408 0x1000>; + brcm,ape-hsls-addr-mask = <0x03400000>; + clock-frequency = <100000>; + status = "disabled"; + }; + }; }; diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi index d2de16645e10..6f90b0e62cba 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi @@ -350,6 +350,11 @@ pinctrl-0 = <&te_irq>; }; +&gpu { + mali-supply = <&buck6_reg>; + status = "okay"; +}; + &hdmi { hpd-gpios = <&gpa3 0 GPIO_ACTIVE_HIGH>; status = "okay"; diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index d29d13f4694f..a76f620f7f35 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -249,6 +249,57 @@ }; }; + gpu: gpu@14ac0000 { + compatible = "samsung,exynos5433-mali", "arm,mali-t760"; + reg = <0x14ac0000 0x5000>; + interrupts = <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "job", "mmu", "gpu"; + clocks = <&cmu_g3d CLK_ACLK_G3D>; + clock-names = "core"; + power-domains = <&pd_g3d>; + operating-points-v2 = <&gpu_opp_table>; + status = "disabled"; + + gpu_opp_table: opp_table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + opp-microvolt = <1000000>; + }; + opp-267000000 { + opp-hz = /bits/ 64 <267000000>; + opp-microvolt = <1000000>; + }; + opp-350000000 { + opp-hz = /bits/ 64 <350000000>; + opp-microvolt = <1025000>; + }; + opp-420000000 { + opp-hz = /bits/ 64 <420000000>; + opp-microvolt = <1025000>; + }; + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <1075000>; + }; + opp-550000000 { + opp-hz = /bits/ 64 <550000000>; + opp-microvolt = <1125000>; + }; + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1150000>; + }; + opp-700000000 { + opp-hz = /bits/ 64 <700000000>; + opp-microvolt = <1150000>; + }; + }; + }; + psci { compatible = "arm,psci"; method = "smc"; diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts index 00dd89b92b42..080e0f56e108 100644 --- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts +++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts @@ -59,6 +59,11 @@ clock-frequency = <24000000>; }; +&gpu { + mali-supply = <&buck6_reg>; + status = "okay"; +}; + &serial_2 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi index 077d23478901..bcb9d8cee267 100644 --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi @@ -78,6 +78,17 @@ }; }; + gpu: gpu@14ac0000 { + compatible = "samsung,exynos5433-mali", "arm,mali-t760"; + reg = <0x14ac0000 0x5000>; + interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "job", "mmu", "gpu"; + status = "disabled"; + /* TODO: operating points for DVFS, cooling device */ + }; + psci { compatible = "arm,psci-0.2"; method = "smc"; diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 0bd122f60549..93fce8f0c66d 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-frwy.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-qds.dtb @@ -21,7 +22,13 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mq-hummingboard-pulse.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-devkit.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mq-nitrogen.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mq-pico-pi.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-rmb3.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-zest.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8qxp-ai_ml.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi index ec6257a5b251..337919366dc8 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi @@ -323,7 +323,7 @@ #size-cells = <0>; reg = <0x0 0x2180000 0x0 0x10000>; interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen 4 3>; status = "disabled"; }; @@ -333,7 +333,7 @@ #size-cells = <0>; reg = <0x0 0x2190000 0x0 0x10000>; interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen 4 3>; status = "disabled"; }; @@ -486,7 +486,6 @@ #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - num-lanes = <4>; num-viewport = <2>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */ diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts index b359068d9605..d98346da01df 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts @@ -17,6 +17,7 @@ compatible = "fsl,ls1028a-qds", "fsl,ls1028a"; aliases { + crypto = &crypto; gpio0 = &gpio1; gpio1 = &gpio2; gpio2 = &gpio3; @@ -47,6 +48,15 @@ regulator-always-on; }; + sb_3v3: regulator-sb3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3_vbus"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + sound { compatible = "simple-audio-card"; simple-audio-card,format = "i2s"; @@ -75,6 +85,26 @@ system-clock-frequency = <25000000>; }; }; + + mdio-mux { + compatible = "mdio-mux-multiplexer"; + mux-controls = <&mux 0>; + mdio-parent-bus = <&enetc_mdio_pf3>; + #address-cells=<1>; + #size-cells = <0>; + + /* on-board RGMII PHY */ + mdio@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + qds_phy1: ethernet-phy@5 { + /* Atheros 8035 */ + reg = <5>; + }; + }; + }; }; &duart0 { @@ -85,6 +115,14 @@ status = "okay"; }; +&esdhc { + status = "okay"; +}; + +&esdhc1 { + status = "okay"; +}; + &i2c0 { status = "okay"; @@ -117,6 +155,12 @@ #size-cells = <0>; reg = <0x3>; + temperature-sensor@4c { + compatible = "nxp,sa56004"; + reg = <0x4c>; + vcc-supply = <&sb_3v3>; + }; + rtc@51 { compatible = "nxp,pcf2129"; reg = <0x51>; @@ -148,8 +192,32 @@ }; }; }; + + fpga@66 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,ls1028aqds-fpga", "fsl,fpga-qixis-i2c", + "simple-mfd"; + reg = <0x66>; + + mux: mux-controller { + compatible = "reg-mux"; + #mux-control-cells = <1>; + mux-reg-masks = <0x54 0xf0>; /* 0: reg 0x54, bits 7:4 */ + }; + }; + +}; + +&enetc_port1 { + phy-handle = <&qds_phy1>; + phy-connection-type = "rgmii-id"; }; &sai1 { status = "okay"; }; + +&sata { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts index f9c272fb0738..1a69221d9a1b 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts @@ -16,6 +16,7 @@ compatible = "fsl,ls1028a-rdb", "fsl,ls1028a"; aliases { + crypto = &crypto; serial0 = &duart0; serial1 = &duart1; }; @@ -43,6 +44,15 @@ regulator-always-on; }; + sb_3v3: regulator-sb3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3_vbus"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + sound { compatible = "simple-audio-card"; simple-audio-card,format = "i2s"; @@ -73,6 +83,19 @@ }; }; +&esdhc { + sd-uhs-sdr104; + sd-uhs-sdr50; + sd-uhs-sdr25; + sd-uhs-sdr12; + status = "okay"; +}; + +&esdhc1 { + mmc-hs200-1_8v; + status = "okay"; +}; + &i2c0 { status = "okay"; @@ -115,6 +138,12 @@ #size-cells = <0>; reg = <0x3>; + temperature-sensor@4c { + compatible = "nxp,sa56004"; + reg = <0x4c>; + vcc-supply = <&sb_3v3>; + }; + rtc@51 { compatible = "nxp,pcf2129"; reg = <0x51>; @@ -151,3 +180,7 @@ &sai4 { status = "okay"; }; + +&sata { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index bf7f845447ed..72b9a75976a1 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -29,6 +29,7 @@ clocks = <&clockgen 1 0>; next-level-cache = <&l2>; cpu-idle-states = <&CPU_PW20>; + #cooling-cells = <2>; }; cpu1: cpu@1 { @@ -39,6 +40,7 @@ clocks = <&clockgen 1 0>; next-level-cache = <&l2>; cpu-idle-states = <&CPU_PW20>; + #cooling-cells = <2>; }; l2: l2-cache { @@ -70,6 +72,34 @@ clock-output-names = "sysclk"; }; + osc_27m: clock-osc-27m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; + clock-output-names = "phy_27m"; + }; + + dpclk: clock-controller@f1f0000 { + compatible = "fsl,ls1028a-plldig"; + reg = <0x0 0xf1f0000 0x0 0xffff>; + #clock-cells = <1>; + clocks = <&osc_27m>; + }; + + aclk: clock-axi { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <650000000>; + clock-output-names= "aclk"; + }; + + pclk: clock-apb { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <650000000>; + clock-output-names= "pclk"; + }; + reboot { compatible ="syscon-reboot"; regmap = <&dcfg>; @@ -150,7 +180,7 @@ #size-cells = <0>; reg = <0x0 0x2000000 0x0 0x10000>; interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen 4 3>; status = "disabled"; }; @@ -160,7 +190,7 @@ #size-cells = <0>; reg = <0x0 0x2010000 0x0 0x10000>; interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen 4 3>; status = "disabled"; }; @@ -170,7 +200,7 @@ #size-cells = <0>; reg = <0x0 0x2020000 0x0 0x10000>; interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen 4 3>; status = "disabled"; }; @@ -180,7 +210,7 @@ #size-cells = <0>; reg = <0x0 0x2030000 0x0 0x10000>; interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen 4 3>; status = "disabled"; }; @@ -190,7 +220,7 @@ #size-cells = <0>; reg = <0x0 0x2040000 0x0 0x10000>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen 4 3>; status = "disabled"; }; @@ -200,7 +230,7 @@ #size-cells = <0>; reg = <0x0 0x2050000 0x0 0x10000>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen 4 3>; status = "disabled"; }; @@ -210,7 +240,7 @@ #size-cells = <0>; reg = <0x0 0x2060000 0x0 0x10000>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen 4 3>; status = "disabled"; }; @@ -220,7 +250,34 @@ #size-cells = <0>; reg = <0x0 0x2070000 0x0 0x10000>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen 4 3>; + status = "disabled"; + }; + + esdhc: mmc@2140000 { + compatible = "fsl,ls1028a-esdhc", "fsl,esdhc"; + reg = <0x0 0x2140000 0x0 0x10000>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <0>; /* fixed up by bootloader */ + clocks = <&clockgen 2 1>; + voltage-ranges = <1800 1800 3300 3300>; + sdhci,auto-cmd12; + little-endian; + bus-width = <4>; + status = "disabled"; + }; + + esdhc1: mmc@2150000 { + compatible = "fsl,ls1028a-esdhc", "fsl,esdhc"; + reg = <0x0 0x2150000 0x0 0x10000>; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <0>; /* fixed up by bootloader */ + clocks = <&clockgen 2 1>; + voltage-ranges = <1800 1800 3300 3300>; + sdhci,auto-cmd12; + broken-cd; + little-endian; + bus-width = <4>; status = "disabled"; }; @@ -256,42 +313,56 @@ }; gpio1: gpio@2300000 { - compatible = "fsl,qoriq-gpio"; + compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio"; reg = <0x0 0x2300000 0x0 0x10000>; interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + little-endian; }; gpio2: gpio@2310000 { - compatible = "fsl,qoriq-gpio"; + compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio"; reg = <0x0 0x2310000 0x0 0x10000>; interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + little-endian; }; gpio3: gpio@2320000 { - compatible = "fsl,qoriq-gpio"; + compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio"; reg = <0x0 0x2320000 0x0 0x10000>; interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + little-endian; }; - wdog0: watchdog@23c0000 { - compatible = "fsl,ls1028a-wdt", "fsl,imx21-wdt"; - reg = <0x0 0x23c0000 0x0 0x10000>; - interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; - big-endian; - status = "disabled"; + usb0: usb@3100000 { + compatible = "fsl,ls1028a-dwc3", "snps,dwc3"; + reg = <0x0 0x3100000 0x0 0x10000>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; + snps,dis_rxdet_inp3_quirk; + snps,quirk-frame-length-adjustment = <0x20>; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + }; + + usb1: usb@3110000 { + compatible = "fsl,ls1028a-dwc3", "snps,dwc3"; + reg = <0x0 0x3110000 0x0 0x10000>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; + snps,dis_rxdet_inp3_quirk; + snps,quirk-frame-length-adjustment = <0x20>; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; }; sata: sata@3200000 { @@ -356,6 +427,79 @@ <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>; }; + crypto: crypto@8000000 { + compatible = "fsl,sec-v5.0", "fsl,sec-v4.0"; + fsl,sec-era = <10>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x00 0x8000000 0x100000>; + reg = <0x00 0x8000000 0x0 0x100000>; + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; + dma-coherent; + + sec_jr0: jr@10000 { + compatible = "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x10000 0x10000>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr1: jr@20000 { + compatible = "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x20000 0x10000>; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr2: jr@30000 { + compatible = "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x30000 0x10000>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr3: jr@40000 { + compatible = "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x40000 0x10000>; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + qdma: dma-controller@8380000 { + compatible = "fsl,ls1028a-qdma", "fsl,ls1021a-qdma"; + reg = <0x0 0x8380000 0x0 0x1000>, /* Controller regs */ + <0x0 0x8390000 0x0 0x10000>, /* Status regs */ + <0x0 0x83a0000 0x0 0x40000>; /* Block regs */ + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "qdma-error", "qdma-queue0", + "qdma-queue1", "qdma-queue2", "qdma-queue3"; + dma-channels = <8>; + block-number = <1>; + block-offset = <0x10000>; + fsl,dma-queues = <2>; + status-sizes = <64>; + queue-sizes = <64 64>; + }; + + cluster1_core0_watchdog: watchdog@c000000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x0 0xc000000 0x0 0x1000>; + clocks = <&clockgen 4 15>, <&clockgen 4 15>; + clock-names = "apb_pclk", "wdog_clk"; + }; + + cluster1_core1_watchdog: watchdog@c010000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x0 0xc010000 0x0 0x1000>; + clocks = <&clockgen 4 15>, <&clockgen 4 15>; + clock-names = "apb_pclk", "wdog_clk"; + }; + sai1: audio-controller@f100000 { #sound-dai-cells = <0>; compatible = "fsl,vf610-sai"; @@ -398,6 +542,89 @@ status = "disabled"; }; + tmu: tmu@1f00000 { + compatible = "fsl,qoriq-tmu"; + reg = <0x0 0x1f80000 0x0 0x10000>; + interrupts = <0 23 0x4>; + fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x70061>; + fsl,tmu-calibration = <0x00000000 0x00000024 + 0x00000001 0x0000002b + 0x00000002 0x00000031 + 0x00000003 0x00000038 + 0x00000004 0x0000003f + 0x00000005 0x00000045 + 0x00000006 0x0000004c + 0x00000007 0x00000053 + 0x00000008 0x00000059 + 0x00000009 0x00000060 + 0x0000000a 0x00000066 + 0x0000000b 0x0000006d + + 0x00010000 0x0000001c + 0x00010001 0x00000024 + 0x00010002 0x0000002c + 0x00010003 0x00000035 + 0x00010004 0x0000003d + 0x00010005 0x00000045 + 0x00010006 0x0000004d + 0x00010007 0x00000045 + 0x00010008 0x0000005e + 0x00010009 0x00000066 + 0x0001000a 0x0000006e + + 0x00020000 0x00000018 + 0x00020001 0x00000022 + 0x00020002 0x0000002d + 0x00020003 0x00000038 + 0x00020004 0x00000043 + 0x00020005 0x0000004d + 0x00020006 0x00000058 + 0x00020007 0x00000063 + 0x00020008 0x0000006e + + 0x00030000 0x00000010 + 0x00030001 0x0000001c + 0x00030002 0x00000029 + 0x00030003 0x00000036 + 0x00030004 0x00000042 + 0x00030005 0x0000004f + 0x00030006 0x0000005b + 0x00030007 0x00000068>; + little-endian; + #thermal-sensor-cells = <1>; + }; + + thermal-zones { + core-cluster { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tmu 0>; + + trips { + core_cluster_alert: core-cluster-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + core_cluster_crit: core-cluster-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&core_cluster_alert>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + pcie@1f0000000 { /* Integrated Endpoint Root Complex */ compatible = "pci-host-ecam-generic"; reg = <0x01 0xf0000000 0x0 0x100000>; @@ -431,6 +658,36 @@ compatible = "fsl,enetc"; reg = <0x000100 0 0 0 0>; }; + enetc_mdio_pf3: mdio@0,3 { + compatible = "fsl,enetc-mdio"; + reg = <0x000300 0 0 0 0>; + #address-cells = <1>; + #size-cells = <0>; + }; + ethernet@0,4 { + compatible = "fsl,enetc-ptp"; + reg = <0x000400 0 0 0 0>; + clocks = <&clockgen 4 0>; + little-endian; + }; + }; + }; + + malidp0: display@f080000 { + compatible = "arm,mali-dp500"; + reg = <0x0 0xf080000 0x0 0x10000>; + interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>, + <0 223 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "DE", "SE"; + clocks = <&dpclk 0>, <&aclk>, <&aclk>, <&pclk>; + clock-names = "pxlclk", "mclk", "aclk", "pclk"; + arm,malidp-output-port-lines = /bits/ 8 <8 8 8>; + arm,malidp-arqos-value = <0xd000d000>; + + port { + dp0_out: endpoint { + + }; }; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index 71d9ed9ff985..c084c7a4b6a6 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -677,7 +677,6 @@ #size-cells = <2>; device_type = "pci"; dma-coherent; - num-lanes = <4>; num-viewport = <6>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */ @@ -704,7 +703,6 @@ #size-cells = <2>; device_type = "pci"; dma-coherent; - num-lanes = <2>; num-viewport = <6>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000 /* downstream I/O */ @@ -731,7 +729,6 @@ #size-cells = <2>; device_type = "pci"; dma-coherent; - num-lanes = <2>; num-viewport = <6>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000 /* downstream I/O */ diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts new file mode 100644 index 000000000000..3595be0f2527 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts @@ -0,0 +1,155 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree Include file for Freescale Layerscape-1046A family SoC. + * + * Copyright 2019 NXP. + * + */ + +/dts-v1/; + +#include "fsl-ls1046a.dtsi" + +/ { + model = "LS1046A FRWY Board"; + compatible = "fsl,ls1046a-frwy", "fsl,ls1046a"; + + aliases { + serial0 = &duart0; + serial1 = &duart1; + serial2 = &duart2; + serial3 = &duart3; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + sb_3v3: regulator-sb3v3 { + compatible = "regulator-fixed"; + regulator-name = "LT8642SEV-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&duart0 { + status = "okay"; +}; + +&duart1 { + status = "okay"; +}; + +&duart2 { + status = "okay"; +}; + +&duart3 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + i2c-mux@77 { + compatible = "nxp,pca9546"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + power-monitor@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + temperature-sensor@4c { + compatible = "nxp,sa56004"; + reg = <0x4c>; + vcc-supply = <&sb_3v3>; + }; + + rtc@51 { + compatible = "nxp,pcf2129"; + reg = <0x51>; + }; + + eeprom@52 { + compatible = "atmel,24c512"; + reg = <0x52>; + }; + + eeprom@53 { + compatible = "atmel,24c512"; + reg = <0x53>; + }; + + }; + }; +}; + +&ifc { + #address-cells = <2>; + #size-cells = <1>; + /* NAND Flash */ + ranges = <0x0 0x0 0x0 0x7e800000 0x00010000>; + status = "okay"; + + nand@0,0 { + compatible = "fsl,ifc-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0 0x0 0x10000>; + }; + +}; + +#include "fsl-ls1046-post.dtsi" + +&fman0 { + ethernet@e0000 { + phy-handle = <&qsgmii_phy4>; + phy-connection-type = "qsgmii"; + }; + + ethernet@e8000 { + phy-handle = <&qsgmii_phy2>; + phy-connection-type = "qsgmii"; + }; + + ethernet@ea000 { + phy-handle = <&qsgmii_phy1>; + phy-connection-type = "qsgmii"; + }; + + ethernet@f2000 { + phy-handle = <&qsgmii_phy3>; + phy-connection-type = "qsgmii"; + }; + + mdio@fd000 { + qsgmii_phy1: ethernet-phy@1c { + reg = <0x1c>; + }; + + qsgmii_phy2: ethernet-phy@1d { + reg = <0x1d>; + }; + + qsgmii_phy3: ethernet-phy@1e { + reg = <0x1e>; + }; + + qsgmii_phy4: ethernet-phy@1f { + reg = <0x1f>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi index b0ef08b090dd..d4c1da3d4bde 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi @@ -649,7 +649,6 @@ #size-cells = <2>; device_type = "pci"; dma-coherent; - num-lanes = <4>; num-viewport = <8>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */ @@ -671,7 +670,6 @@ reg-names = "regs", "addr_space"; num-ib-windows = <6>; num-ob-windows = <8>; - num-lanes = <2>; status = "disabled"; }; @@ -687,7 +685,6 @@ #size-cells = <2>; device_type = "pci"; dma-coherent; - num-lanes = <2>; num-viewport = <8>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000 /* downstream I/O */ @@ -709,7 +706,6 @@ reg-names = "regs", "addr_space"; num-ib-windows = <6>; num-ob-windows = <8>; - num-lanes = <2>; status = "disabled"; }; @@ -725,7 +721,6 @@ #size-cells = <2>; device_type = "pci"; dma-coherent; - num-lanes = <2>; num-viewport = <8>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000 /* downstream I/O */ @@ -747,7 +742,6 @@ reg-names = "regs", "addr_space"; num-ib-windows = <6>; num-ob-windows = <8>; - num-lanes = <2>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts index 6f48d21b97c0..120e62dad154 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts @@ -17,6 +17,39 @@ compatible = "fsl,ls1088a-qds", "fsl,ls1088a"; }; +&dspi { + bus-num = <0>; + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + + flash@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-cpol; + spi-cpha; + spi-max-frequency = <3500000>; + reg = <1>; + }; + + flash@2 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-cpol; + spi-cpha; + spi-max-frequency = <3500000>; + reg = <2>; + }; +}; + &i2c0 { status = "okay"; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi index 661137ffa319..c676d0771762 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi @@ -252,6 +252,19 @@ #thermal-sensor-cells = <1>; }; + dspi: spi@2100000 { + compatible = "fsl,ls1088a-dspi", + "fsl,ls1021a-v1.0-dspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2100000 0x0 0x10000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "dspi"; + clocks = <&clockgen 4 1>; + spi-num-chipselects = <6>; + status = "disabled"; + }; + duart0: serial@21c0500 { compatible = "fsl,ns16550", "ns16550a"; reg = <0x0 0x21c0500 0x0 0x100>; @@ -269,9 +282,10 @@ }; gpio0: gpio@2300000 { - compatible = "fsl,qoriq-gpio"; + compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio"; reg = <0x0 0x2300000 0x0 0x10000>; interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>; + little-endian; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -279,9 +293,10 @@ }; gpio1: gpio@2310000 { - compatible = "fsl,qoriq-gpio"; + compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio"; reg = <0x0 0x2310000 0x0 0x10000>; interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>; + little-endian; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -289,9 +304,10 @@ }; gpio2: gpio@2320000 { - compatible = "fsl,qoriq-gpio"; + compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio"; reg = <0x0 0x2320000 0x0 0x10000>; interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>; + little-endian; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -299,9 +315,10 @@ }; gpio3: gpio@2330000 { - compatible = "fsl,qoriq-gpio"; + compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio"; reg = <0x0 0x2330000 0x0 0x10000>; interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>; + little-endian; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -324,7 +341,7 @@ #size-cells = <0>; reg = <0x0 0x2000000 0x0 0x10000>; interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 3>; + clocks = <&clockgen 4 7>; status = "disabled"; }; @@ -334,7 +351,7 @@ #size-cells = <0>; reg = <0x0 0x2010000 0x0 0x10000>; interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 3>; + clocks = <&clockgen 4 7>; status = "disabled"; }; @@ -344,7 +361,7 @@ #size-cells = <0>; reg = <0x0 0x2020000 0x0 0x10000>; interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 3>; + clocks = <&clockgen 4 7>; status = "disabled"; }; @@ -354,7 +371,7 @@ #size-cells = <0>; reg = <0x0 0x2030000 0x0 0x10000>; interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 3>; + clocks = <&clockgen 4 7>; status = "disabled"; }; @@ -452,7 +469,6 @@ #size-cells = <2>; device_type = "pci"; dma-coherent; - num-lanes = <4>; num-viewport = <256>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000 /* downstream I/O */ @@ -478,7 +494,6 @@ #size-cells = <2>; device_type = "pci"; dma-coherent; - num-lanes = <4>; num-viewport = <6>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x28 0x00010000 0x0 0x00010000 /* downstream I/O */ @@ -504,7 +519,6 @@ #size-cells = <2>; device_type = "pci"; dma-coherent; - num-lanes = <8>; num-viewport = <6>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x30 0x00010000 0x0 0x00010000 /* downstream I/O */ @@ -609,6 +623,19 @@ <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>; }; + console@8340020 { + compatible = "fsl,dpaa2-console"; + reg = <0x00000000 0x08340020 0 0x2>; + }; + + ptp-timer@8b95000 { + compatible = "fsl,dpaa2-ptp"; + reg = <0x0 0x8b95000 0x0 0x100>; + clocks = <&clockgen 4 0>; + little-endian; + fsl,extts-fifo; + }; + cluster1_core0_watchdog: wdt@c000000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc000000 0x0 0x1000>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi index d7e78dcd153d..7a0be8eaa84a 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi @@ -321,6 +321,19 @@ }; }; + console@8340020 { + compatible = "fsl,dpaa2-console"; + reg = <0x00000000 0x08340020 0 0x2>; + }; + + ptp-timer@8b95000 { + compatible = "fsl,dpaa2-ptp"; + reg = <0x0 0x8b95000 0x0 0x100>; + clocks = <&clockgen 4 1>; + little-endian; + fsl,extts-fifo; + }; + fsl_mc: fsl-mc@80c000000 { compatible = "fsl,qoriq-mc"; reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */ @@ -626,7 +639,6 @@ #size-cells = <2>; device_type = "pci"; dma-coherent; - num-lanes = <4>; num-viewport = <6>; bus-range = <0x0 0xff>; msi-parent = <&its>; @@ -648,7 +660,6 @@ #size-cells = <2>; device_type = "pci"; dma-coherent; - num-lanes = <4>; num-viewport = <6>; bus-range = <0x0 0xff>; msi-parent = <&its>; @@ -670,7 +681,6 @@ #size-cells = <2>; device_type = "pci"; dma-coherent; - num-lanes = <8>; num-viewport = <256>; bus-range = <0x0 0xff>; msi-parent = <&its>; @@ -692,7 +702,6 @@ #size-cells = <2>; device_type = "pci"; dma-coherent; - num-lanes = <4>; num-viewport = <6>; bus-range = <0x0 0xff>; msi-parent = <&its>; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi index 125a8cc2c5b3..408e0ecdce6a 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi @@ -485,7 +485,7 @@ reg = <0x0 0x2000000 0x0 0x10000>; interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; - clocks = <&clockgen 4 7>; + clocks = <&clockgen 4 15>; scl-gpio = <&gpio2 15 GPIO_ACTIVE_HIGH>; status = "disabled"; }; @@ -497,7 +497,7 @@ reg = <0x0 0x2010000 0x0 0x10000>; interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; - clocks = <&clockgen 4 7>; + clocks = <&clockgen 4 15>; status = "disabled"; }; @@ -508,7 +508,7 @@ reg = <0x0 0x2020000 0x0 0x10000>; interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; - clocks = <&clockgen 4 7>; + clocks = <&clockgen 4 15>; status = "disabled"; }; @@ -519,7 +519,7 @@ reg = <0x0 0x2030000 0x0 0x10000>; interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; - clocks = <&clockgen 4 7>; + clocks = <&clockgen 4 15>; status = "disabled"; }; @@ -530,7 +530,7 @@ reg = <0x0 0x2040000 0x0 0x10000>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; - clocks = <&clockgen 4 7>; + clocks = <&clockgen 4 15>; scl-gpio = <&gpio2 16 GPIO_ACTIVE_HIGH>; status = "disabled"; }; @@ -542,7 +542,7 @@ reg = <0x0 0x2050000 0x0 0x10000>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; - clocks = <&clockgen 4 7>; + clocks = <&clockgen 4 15>; status = "disabled"; }; @@ -553,7 +553,7 @@ reg = <0x0 0x2060000 0x0 0x10000>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; - clocks = <&clockgen 4 7>; + clocks = <&clockgen 4 15>; status = "disabled"; }; @@ -564,7 +564,7 @@ reg = <0x0 0x2070000 0x0 0x10000>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; - clocks = <&clockgen 4 7>; + clocks = <&clockgen 4 15>; status = "disabled"; }; @@ -848,6 +848,19 @@ dma-coherent; }; + console@8340020 { + compatible = "fsl,dpaa2-console"; + reg = <0x00000000 0x08340020 0 0x2>; + }; + + ptp-timer@8b95000 { + compatible = "fsl,dpaa2-ptp"; + reg = <0x0 0x8b95000 0x0 0x100>; + clocks = <&clockgen 4 1>; + little-endian; + fsl,extts-fifo; + }; + fsl_mc: fsl-mc@80c000000 { compatible = "fsl,qoriq-mc"; reg = <0x00000008 0x0c000000 0 0x40>, diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts index 2d5d89475b76..f7a15f3904c2 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts @@ -5,6 +5,7 @@ /dts-v1/; +#include <dt-bindings/usb/pd.h> #include "imx8mm.dtsi" / { @@ -37,6 +38,41 @@ gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; enable-active-high; }; + + wm8524: audio-codec { + #sound-dai-cells = <0>; + compatible = "wlf,wm8524"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_wlf>; + wlf,mute-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>; + }; + + sound-wm8524 { + compatible = "simple-audio-card"; + simple-audio-card,name = "wm8524-audio"; + simple-audio-card,format = "i2s"; + simple-audio-card,frame-master = <&cpudai>; + simple-audio-card,bitclock-master = <&cpudai>; + simple-audio-card,widgets = + "Line", "Left Line Out Jack", + "Line", "Right Line Out Jack"; + simple-audio-card,routing = + "Left Line Out Jack", "LINEVOUTL", + "Right Line Out Jack", "LINEVOUTR"; + + cpudai: simple-audio-card,cpu { + sound-dai = <&sai3>; + }; + + simple-audio-card,codec { + sound-dai = <&wm8524>; + clocks = <&clk IMX8MM_CLK_SAI3_ROOT>; + }; + }; +}; + +&A53_0 { + cpu-supply = <&buck2_reg>; }; &fec1 { @@ -54,19 +90,44 @@ ethphy0: ethernet-phy@0 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <0>; - at803x,led-act-blind-workaround; - at803x,eee-okay; - at803x,vddio-1p8v; }; }; }; +&sai3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai3>; + assigned-clocks = <&clk IMX8MM_CLK_SAI3>; + assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>; + assigned-clock-rates = <24576000>; + status = "okay"; +}; + +&snvs_pwrkey { + status = "okay"; +}; + &uart2 { /* console */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; status = "okay"; }; +&usbotg1 { + dr_mode = "otg"; + hnp-disable; + srp-disable; + adp-disable; + usb-role-switch; + status = "okay"; + + port { + usb1_drd_sw: endpoint { + remote-endpoint = <&typec1_dr_sw>; + }; + }; +}; + &usdhc2 { pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; @@ -95,6 +156,156 @@ status = "okay"; }; +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic@4b { + compatible = "rohm,bd71847"; + reg = <0x4b>; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio1>; + interrupts = <3 GPIO_ACTIVE_LOW>; + rohm,reset-snvs-powered; + + regulators { + buck1_reg: BUCK1 { + regulator-name = "BUCK1"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + }; + + buck2_reg: BUCK2 { + regulator-name = "BUCK2"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <1000000>; + rohm,dvs-idle-voltage = <900000>; + }; + + buck3_reg: BUCK3 { + // BUCK5 in datasheet + regulator-name = "BUCK3"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + regulator-always-on; + }; + + buck4_reg: BUCK4 { + // BUCK6 in datasheet + regulator-name = "BUCK4"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + buck5_reg: BUCK5 { + // BUCK7 in datasheet + regulator-name = "BUCK5"; + regulator-min-microvolt = <1605000>; + regulator-max-microvolt = <1995000>; + regulator-boot-on; + regulator-always-on; + }; + + buck6_reg: BUCK6 { + // BUCK8 in datasheet + regulator-name = "BUCK6"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: LDO1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2_reg: LDO2 { + regulator-name = "LDO2"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "LDO3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4_reg: LDO4 { + regulator-name = "LDO4"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo6_reg: LDO6 { + regulator-name = "LDO6"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + ptn5110: tcpc@50 { + compatible = "nxp,ptn5110"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_typec1>; + reg = <0x50>; + interrupt-parent = <&gpio2>; + interrupts = <11 8>; + status = "okay"; + + port { + typec1_dr_sw: endpoint { + remote-endpoint = <&usb1_drd_sw>; + }; + }; + + typec1_con: connector { + compatible = "usb-c-connector"; + label = "USB-C"; + power-role = "dual"; + data-role = "dual"; + try-power-role = "sink"; + source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>; + sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM) + PDO_VAR(5000, 20000, 3000)>; + op-sink-microwatt = <15000000>; + self-powered; + }; + }; +}; + &iomuxc { pinctrl-names = "default"; @@ -124,12 +335,53 @@ >; }; + pinctrl_gpio_wlf: gpiowlfgrp { + fsl,pins = < + MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21 0xd6 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 + MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3 + MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3 + >; + }; + + pinctrl_pmic: pmicirq { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41 + >; + }; + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc { fsl,pins = < MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 >; }; + pinctrl_sai3: sai3grp { + fsl,pins = < + MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6 + MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6 + MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK 0xd6 + MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6 + >; + }; + + pinctrl_typec1: typec1grp { + fsl,pins = < + MX8MM_IOMUXC_SD1_STROBE_GPIO2_IO11 0x159 + >; + }; + pinctrl_uart2: uart2grp { fsl,pins = < MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 diff --git a/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h b/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h index e25f7fcd7997..cffa8991880d 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h +++ b/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h @@ -462,7 +462,7 @@ #define MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x1CC 0x434 0x000 0x5 0x0 #define MX8MM_IOMUXC_SAI3_RXFS_TPSMP_HTRANS0 0x1CC 0x434 0x000 0x7 0x0 #define MX8MM_IOMUXC_SAI3_RXC_SAI3_RX_BCLK 0x1D0 0x438 0x000 0x0 0x0 -#define MX8MM_IOMUXC_SAI3_RXC_GPT1_CAPTURE2 0x1D0 0x438 0x000 0x1 0x0 +#define MX8MM_IOMUXC_SAI3_RXC_GPT1_CLK 0x1D0 0x438 0x000 0x1 0x0 #define MX8MM_IOMUXC_SAI3_RXC_SAI5_RX_BCLK 0x1D0 0x438 0x4D0 0x2 0x2 #define MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29 0x1D0 0x438 0x000 0x5 0x0 #define MX8MM_IOMUXC_SAI3_RXC_TPSMP_HTRANS1 0x1D0 0x438 0x000 0x7 0x0 @@ -472,7 +472,7 @@ #define MX8MM_IOMUXC_SAI3_RXD_GPIO4_IO30 0x1D4 0x43C 0x000 0x5 0x0 #define MX8MM_IOMUXC_SAI3_RXD_TPSMP_HDATA0 0x1D4 0x43C 0x000 0x7 0x0 #define MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0x1D8 0x440 0x000 0x0 0x0 -#define MX8MM_IOMUXC_SAI3_TXFS_GPT1_CLK 0x1D8 0x440 0x000 0x1 0x0 +#define MX8MM_IOMUXC_SAI3_TXFS_GPT1_CAPTURE2 0x1D8 0x440 0x000 0x1 0x0 #define MX8MM_IOMUXC_SAI3_TXFS_SAI5_RX_DATA1 0x1D8 0x440 0x4D8 0x2 0x2 #define MX8MM_IOMUXC_SAI3_TXFS_GPIO4_IO31 0x1D8 0x440 0x000 0x5 0x0 #define MX8MM_IOMUXC_SAI3_TXFS_TPSMP_HDATA1 0x1D8 0x440 0x000 0x7 0x0 diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi index 6b407a94c06e..5f9d0da196e1 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi @@ -44,6 +44,19 @@ #address-cells = <1>; #size-cells = <0>; + idle-states { + entry-method = "psci"; + + cpu_pd_wait: cpu-pd-wait { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010033>; + local-timer-stop; + entry-latency-us = <1000>; + exit-latency-us = <700>; + min-residency-us = <2700>; + }; + }; + A53_0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a53"; @@ -53,6 +66,9 @@ enable-method = "psci"; next-level-cache = <&A53_L2>; operating-points-v2 = <&a53_opp_table>; + nvmem-cells = <&cpu_speed_grade>; + nvmem-cell-names = "speed_grade"; + cpu-idle-states = <&cpu_pd_wait>; }; A53_1: cpu@1 { @@ -64,6 +80,7 @@ enable-method = "psci"; next-level-cache = <&A53_L2>; operating-points-v2 = <&a53_opp_table>; + cpu-idle-states = <&cpu_pd_wait>; }; A53_2: cpu@2 { @@ -75,6 +92,7 @@ enable-method = "psci"; next-level-cache = <&A53_L2>; operating-points-v2 = <&a53_opp_table>; + cpu-idle-states = <&cpu_pd_wait>; }; A53_3: cpu@3 { @@ -86,6 +104,7 @@ enable-method = "psci"; next-level-cache = <&A53_L2>; operating-points-v2 = <&a53_opp_table>; + cpu-idle-states = <&cpu_pd_wait>; }; A53_L2: l2-cache0 { @@ -100,12 +119,23 @@ opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; opp-microvolt = <850000>; + opp-supported-hw = <0xe>, <0x7>; clock-latency-ns = <150000>; + opp-suspend; }; opp-1600000000 { opp-hz = /bits/ 64 <1600000000>; opp-microvolt = <900000>; + opp-supported-hw = <0xc>, <0x7>; + clock-latency-ns = <150000>; + opp-suspend; + }; + + opp-1800000000 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <1000000>; + opp-supported-hw = <0x8>, <0x3>; clock-latency-ns = <150000>; opp-suspend; }; @@ -158,15 +188,6 @@ clock-output-names = "clk_ext4"; }; - gic: interrupt-controller@38800000 { - compatible = "arm,gic-v3"; - reg = <0x0 0x38800000 0 0x10000>, /* GIC Dist */ - <0x0 0x38880000 0 0xC0000>; /* GICR (RD_base + SGI_base) */ - #interrupt-cells = <3>; - interrupt-controller; - interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; - }; - psci { compatible = "arm,psci-1.0"; method = "smc"; @@ -189,7 +210,23 @@ arm,no-tick-in-suspend; }; - soc { + usbphynop1: usbphynop1 { + compatible = "usb-nop-xceiv"; + clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; + assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>; + clock-names = "main_clk"; + }; + + usbphynop2: usbphynop2 { + compatible = "usb-nop-xceiv"; + clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; + assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>; + clock-names = "main_clk"; + }; + + soc@0 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -199,17 +236,85 @@ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges; + ranges = <0x30000000 0x30000000 0x400000>; + + sai1: sai@30010000 { + compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; + reg = <0x30010000 0x10000>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_SAI1_IPG>, + <&clk IMX8MM_CLK_SAI1_ROOT>, + <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 0 2 0>, <&sdma2 1 2 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + sai2: sai@30020000 { + compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; + reg = <0x30020000 0x10000>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_SAI2_IPG>, + <&clk IMX8MM_CLK_SAI2_ROOT>, + <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 2 2 0>, <&sdma2 3 2 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + sai3: sai@30030000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; + reg = <0x30030000 0x10000>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_SAI3_IPG>, + <&clk IMX8MM_CLK_SAI3_ROOT>, + <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 4 2 0>, <&sdma2 5 2 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + sai5: sai@30050000 { + compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; + reg = <0x30050000 0x10000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_SAI5_IPG>, + <&clk IMX8MM_CLK_SAI5_ROOT>, + <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 8 2 0>, <&sdma2 9 2 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + sai6: sai@30060000 { + compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; + reg = <0x30060000 0x10000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_SAI6_IPG>, + <&clk IMX8MM_CLK_SAI6_ROOT>, + <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 10 2 0>, <&sdma2 11 2 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; gpio1: gpio@30200000 { compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio"; reg = <0x30200000 0x10000>; interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_GPIO1_ROOT>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 10 30>; }; gpio2: gpio@30210000 { @@ -217,10 +322,12 @@ reg = <0x30210000 0x10000>; interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_GPIO2_ROOT>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 40 21>; }; gpio3: gpio@30220000 { @@ -228,10 +335,12 @@ reg = <0x30220000 0x10000>; interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_GPIO3_ROOT>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 61 26>; }; gpio4: gpio@30230000 { @@ -239,10 +348,12 @@ reg = <0x30230000 0x10000>; interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_GPIO4_ROOT>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 87 32>; }; gpio5: gpio@30240000 { @@ -250,10 +361,12 @@ reg = <0x30240000 0x10000>; interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_GPIO5_ROOT>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 119 30>; }; wdog1: watchdog@30280000 { @@ -319,6 +432,10 @@ /* For nvmem subnodes */ #address-cells = <1>; #size-cells = <1>; + + cpu_speed_grade: speed-grade@10 { + reg = <0x10 4>; + }; }; anatop: anatop@30360000 { @@ -336,6 +453,8 @@ offset = <0x34>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_SNVS_ROOT>; + clock-names = "snvs-rtc"; }; snvs_pwrkey: snvs-powerkey { @@ -344,6 +463,7 @@ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; linux,keycode = <KEY_POWER>; wakeup-source; + status = "disabled"; }; }; @@ -355,10 +475,22 @@ <&clk_ext3>, <&clk_ext4>; clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2", "clk_ext3", "clk_ext4"; + assigned-clocks = <&clk IMX8MM_CLK_NOC>, + <&clk IMX8MM_CLK_AUDIO_AHB>, + <&clk IMX8MM_CLK_IPG_AUDIO_ROOT>, + <&clk IMX8MM_SYS_PLL3>, + <&clk IMX8MM_VIDEO_PLL1>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL3_OUT>, + <&clk IMX8MM_SYS_PLL1_800M>; + assigned-clock-rates = <0>, + <400000000>, + <400000000>, + <750000000>, + <594000000>; }; src: reset-controller@30390000 { - compatible = "fsl,imx8mm-src", "syscon"; + compatible = "fsl,imx8mm-src", "fsl,imx8mq-src", "syscon"; reg = <0x30390000 0x10000>; interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; #reset-cells = <1>; @@ -369,7 +501,7 @@ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges; + ranges = <0x30400000 0x30400000 0x400000>; pwm1: pwm@30660000 { compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm"; @@ -414,13 +546,21 @@ #pwm-cells = <2>; status = "disabled"; }; + + system_counter: timer@306a0000 { + compatible = "nxp,sysctr-timer"; + reg = <0x306a0000 0x20000>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc_24m>; + clock-names = "per"; + }; }; aips3: bus@30800000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges; + ranges = <0x30800000 0x30800000 0x400000>; ecspi1: spi@30820000 { compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi"; @@ -639,7 +779,7 @@ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges; + ranges = <0x32c00000 0x32c00000 0x400000>; usbotg1: usb@32e40000 { compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb"; @@ -647,23 +787,13 @@ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>; clock-names = "usb1_ctrl_root_clk"; - assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>, - <&clk IMX8MM_CLK_USB_CORE_REF>; - assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>, - <&clk IMX8MM_SYS_PLL1_100M>; + assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>; fsl,usbphy = <&usbphynop1>; fsl,usbmisc = <&usbmisc1 0>; status = "disabled"; }; - usbphynop1: usbphynop1 { - compatible = "usb-nop-xceiv"; - clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; - assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; - assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>; - clock-names = "main_clk"; - }; - usbmisc1: usbmisc@32e40200 { compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc"; #index-cells = <1>; @@ -676,23 +806,13 @@ interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>; clock-names = "usb1_ctrl_root_clk"; - assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>, - <&clk IMX8MM_CLK_USB_CORE_REF>; - assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>, - <&clk IMX8MM_SYS_PLL1_100M>; + assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>; fsl,usbphy = <&usbphynop2>; fsl,usbmisc = <&usbmisc2 0>; status = "disabled"; }; - usbphynop2: usbphynop2 { - compatible = "usb-nop-xceiv"; - clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; - assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; - assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>; - clock-names = "main_clk"; - }; - usbmisc2: usbmisc@32e50200 { compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc"; #index-cells = <1>; @@ -729,5 +849,21 @@ dma-names = "rx-tx"; status = "disabled"; }; + + gic: interrupt-controller@38800000 { + compatible = "arm,gic-v3"; + reg = <0x38800000 0x10000>, /* GIC Dist */ + <0x38880000 0xc0000>; /* GICR (RD_base + SGI_base) */ + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + ddr-pmu@3d800000 { + compatible = "fsl,imx8mm-ddr-pmu", "fsl,imx8m-ddr-pmu"; + reg = <0x3d800000 0x400000>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + }; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts new file mode 100644 index 000000000000..11c705d225d0 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts @@ -0,0 +1,348 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2019 NXP + */ + +/dts-v1/; + +#include "imx8mn.dtsi" + +/ { + model = "NXP i.MX8MNano DDR4 EVK board"; + compatible = "fsl,imx8mn-ddr4-evk", "fsl,imx8mn"; + + chosen { + stdout-path = &uart2; + }; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&A53_0 { + cpu-supply = <&buck2_reg>; +}; + +&iomuxc { + pinctrl-names = "default"; + + pinctrl_fec1: fec1grp { + fsl,pins = < + MX8MN_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 + MX8MN_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MN_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MN_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MN_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MN_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + MX8MN_IOMUXC_SAI2_RXC_GPIO4_IO22 0x19 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MN_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 + MX8MN_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 + >; + }; + + pinctrl_pmic: pmicirq { + fsl,pins = < + MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41 + >; + }; + + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc { + fsl,pins = < + MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 + MX8MN_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2grpgpio { + fsl,pins = < + MX8MN_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x1c4 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 + MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 + MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 + MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 + MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 + MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 + MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + fsl,pins = < + MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 + MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 + MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 + MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 + MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 + MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 + MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + fsl,pins = < + MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 + MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 + MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 + MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 + MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 + MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 + MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x40000190 + MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0 + MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0 + MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0 + MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 + MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0 + MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0 + MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0 + MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0 + MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0 + MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + fsl,pins = < + MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x40000194 + MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 + MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 + MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 + MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 + MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 + MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 + MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 + MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 + MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 + MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + fsl,pins = < + MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x40000196 + MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 + MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6 + MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6 + MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6 + MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6 + MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6 + MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6 + MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6 + MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6 + MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + at803x,led-act-blind-workaround; + at803x,eee-disabled; + at803x,vddio-1p8v; + }; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic@4b { + compatible = "rohm,bd71847"; + reg = <0x4b>; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio1>; + interrupts = <3 GPIO_ACTIVE_LOW>; + rohm,reset-snvs-powered; + + regulators { + buck1_reg: BUCK1 { + regulator-name = "BUCK1"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + }; + + buck2_reg: BUCK2 { + regulator-name = "BUCK2"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + }; + + buck3_reg: BUCK3 { + // BUCK5 in datasheet + regulator-name = "BUCK3"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + }; + + buck4_reg: BUCK4 { + // BUCK6 in datasheet + regulator-name = "BUCK4"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + buck5_reg: BUCK5 { + // BUCK7 in datasheet + regulator-name = "BUCK5"; + regulator-min-microvolt = <1605000>; + regulator-max-microvolt = <1995000>; + regulator-boot-on; + regulator-always-on; + }; + + buck6_reg: BUCK6 { + // BUCK8 in datasheet + regulator-name = "BUCK6"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: LDO1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2_reg: LDO2 { + regulator-name = "LDO2"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "LDO3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4_reg: LDO4 { + regulator-name = "LDO4"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo6_reg: LDO6 { + regulator-name = "LDO6"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&snvs_pwrkey { + status = "okay"; +}; + +&uart2 { /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + bus-width = <4>; + vmmc-supply = <®_usdhc2_vmmc>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-pinfunc.h b/arch/arm64/boot/dts/freescale/imx8mn-pinfunc.h new file mode 100644 index 000000000000..faf1e69e742b --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mn-pinfunc.h @@ -0,0 +1,646 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2018-2019 NXP + */ + +#ifndef __DTS_IMX8MN_PINFUNC_H +#define __DTS_IMX8MN_PINFUNC_H + +/* + * The pin function ID is a tuple of + * <mux_reg conf_reg input_reg mux_mode input_val> + */ + +#define MX8MN_IOMUXC_BOOT_MODE2_CCMSRCGPCMIX_BOOT_MODE2 0x020 0x25C 0x000 0x0 0x0 +#define MX8MN_IOMUXC_BOOT_MODE2_I2C1_SCL 0x020 0x25C 0x55C 0x1 0x3 +#define MX8MN_IOMUXC_BOOT_MODE3_CCMSRCGPCMIX_BOOT_MODE3 0x024 0x260 0x000 0x0 0x0 +#define MX8MN_IOMUXC_BOOT_MODE3_I2C1_SDA 0x024 0x260 0x56C 0x1 0x3 +#define MX8MN_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x028 0x290 0x000 0x0 0x0 +#define MX8MN_IOMUXC_GPIO1_IO00_CCMSRCGPCMIX_ENET_PHY_REF_CLK_ROOT 0x028 0x290 0x000 0x1 0x0 +#define MX8MN_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x028 0x290 0x000 0x5 0x0 +#define MX8MN_IOMUXC_GPIO1_IO00_CCMSRCGPCMIX_EXT_CLK1 0x028 0x290 0x000 0x6 0x0 +#define MX8MN_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x02C 0x294 0x000 0x0 0x0 +#define MX8MN_IOMUXC_GPIO1_IO01_PWM1_OUT 0x02C 0x294 0x000 0x1 0x0 +#define MX8MN_IOMUXC_GPIO1_IO01_ANAMIX_REF_CLK_24M 0x02C 0x294 0x000 0x5 0x0 +#define MX8MN_IOMUXC_GPIO1_IO01_CCMSRCGPCMIX_EXT_CLK2 0x02C 0x294 0x000 0x6 0x0 +#define MX8MN_IOMUXC_GPIO1_IO02_GPIO1_IO2 0x030 0x298 0x000 0x0 0x0 +#define MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0x030 0x298 0x000 0x1 0x0 +#define MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_ANY 0x030 0x298 0x000 0x5 0x0 +#define MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x034 0x29C 0x000 0x0 0x0 +#define MX8MN_IOMUXC_GPIO1_IO03_USDHC1_VSELECT 0x034 0x29C 0x000 0x1 0x0 +#define MX8MN_IOMUXC_GPIO1_IO03_SDMA1_EXT_EVENT0 0x034 0x29C 0x000 0x5 0x0 +#define MX8MN_IOMUXC_GPIO1_IO03_ANAMIX_XTAL_OK 0x034 0x29C 0x000 0x6 0x0 +#define MX8MN_IOMUXC_GPIO1_IO04_GPIO1_IO4 0x038 0x2A0 0x000 0x0 0x0 +#define MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x038 0x2A0 0x000 0x1 0x0 +#define MX8MN_IOMUXC_GPIO1_IO04_SDMA1_EXT_EVENT1 0x038 0x2A0 0x000 0x5 0x0 +#define MX8MN_IOMUXC_GPIO1_IO04_ANAMIX_XTAL_OK_LV 0x038 0x2A0 0x000 0x6 0x0 +#define MX8MN_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x03C 0x2A4 0x000 0x0 0x0 +#define MX8MN_IOMUXC_GPIO1_IO05_M4_NMI 0x03C 0x2A4 0x000 0x1 0x0 +#define MX8MN_IOMUXC_GPIO1_IO05_CCMSRCGPCMIX_PMIC_READY 0x03C 0x2A4 0x4BC 0x5 0x0 +#define MX8MN_IOMUXC_GPIO1_IO05_CCMSRCGPCMIX_INT_BOOT 0x03C 0x2A4 0x000 0x6 0x0 +#define MX8MN_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x040 0x2A8 0x000 0x0 0x0 +#define MX8MN_IOMUXC_GPIO1_IO06_ENET1_MDC 0x040 0x2A8 0x000 0x1 0x0 +#define MX8MN_IOMUXC_GPIO1_IO06_USDHC1_CD_B 0x040 0x2A8 0x000 0x5 0x0 +#define MX8MN_IOMUXC_GPIO1_IO06_CCMSRCGPCMIX_EXT_CLK3 0x040 0x2A8 0x000 0x6 0x0 +#define MX8MN_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x044 0x2AC 0x000 0x0 0x0 +#define MX8MN_IOMUXC_GPIO1_IO07_ENET1_MDIO 0x044 0x2AC 0x4C0 0x1 0x0 +#define MX8MN_IOMUXC_GPIO1_IO07_USDHC1_WP 0x044 0x2AC 0x000 0x5 0x0 +#define MX8MN_IOMUXC_GPIO1_IO07_CCMSRCGPCMIX_EXT_CLK4 0x044 0x2AC 0x000 0x6 0x0 +#define MX8MN_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x048 0x2B0 0x000 0x0 0x0 +#define MX8MN_IOMUXC_GPIO1_IO08_ENET1_1588_EVENT0_IN 0x048 0x2B0 0x000 0x1 0x0 +#define MX8MN_IOMUXC_GPIO1_IO08_PWM1_OUT 0x048 0x2B0 0x000 0x2 0x0 +#define MX8MN_IOMUXC_GPIO1_IO08_USDHC2_RESET_B 0x048 0x2B0 0x000 0x5 0x0 +#define MX8MN_IOMUXC_GPIO1_IO08_CCMSRCGPCMIX_WAIT 0x048 0x2B0 0x000 0x6 0x0 +#define MX8MN_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x04C 0x2B4 0x000 0x0 0x0 +#define MX8MN_IOMUXC_GPIO1_IO09_ENET1_1588_EVENT0_OUT 0x04C 0x2B4 0x000 0x1 0x0 +#define MX8MN_IOMUXC_GPIO1_IO09_PWM2_OUT 0x04C 0x2B4 0x000 0x2 0x0 +#define MX8MN_IOMUXC_GPIO1_IO09_USDHC3_RESET_B 0x04C 0x2B4 0x000 0x4 0x0 +#define MX8MN_IOMUXC_GPIO1_IO09_SDMA2_EXT_EVENT0 0x04C 0x2B4 0x000 0x5 0x0 +#define MX8MN_IOMUXC_GPIO1_IO09_CCMSRCGPCMIX_STOP 0x04C 0x2B4 0x000 0x6 0x0 +#define MX8MN_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x050 0x2B8 0x000 0x0 0x0 +#define MX8MN_IOMUXC_GPIO1_IO10_USB1_OTG_ID 0x050 0x2B8 0x000 0x1 0x0 +#define MX8MN_IOMUXC_GPIO1_IO10_PWM3_OUT 0x050 0x2B8 0x000 0x2 0x0 +#define MX8MN_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x054 0x2BC 0x000 0x0 0x0 +#define MX8MN_IOMUXC_GPIO1_IO11_PWM2_OUT 0x054 0x2BC 0x000 0x1 0x0 +#define MX8MN_IOMUXC_GPIO1_IO11_USDHC3_VSELECT 0x054 0x2BC 0x000 0x4 0x0 +#define MX8MN_IOMUXC_GPIO1_IO11_CCMSRCGPCMIX_PMIC_READY 0x054 0x2BC 0x4BC 0x5 0x1 +#define MX8MN_IOMUXC_GPIO1_IO11_CCMSRCGPCMIX_OUT0 0x054 0x2BC 0x000 0x6 0x0 +#define MX8MN_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x058 0x2C0 0x000 0x0 0x0 +#define MX8MN_IOMUXC_GPIO1_IO12_USB1_OTG_PWR 0x058 0x2C0 0x000 0x1 0x0 +#define MX8MN_IOMUXC_GPIO1_IO12_SDMA2_EXT_EVENT1 0x058 0x2C0 0x000 0x5 0x0 +#define MX8MN_IOMUXC_GPIO1_IO12_CCMSRCGPCMIX_OUT1 0x058 0x2C0 0x000 0x6 0x0 +#define MX8MN_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x05C 0x2C4 0x000 0x0 0x0 +#define MX8MN_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x05C 0x2C4 0x000 0x1 0x0 +#define MX8MN_IOMUXC_GPIO1_IO13_PWM2_OUT 0x05C 0x2C4 0x000 0x5 0x0 +#define MX8MN_IOMUXC_GPIO1_IO13_CCMSRCGPCMIX_OUT2 0x05C 0x2C4 0x000 0x6 0x0 +#define MX8MN_IOMUXC_GPIO1_IO14_GPIO1_IO14 0x060 0x2C8 0x000 0x0 0x0 +#define MX8MN_IOMUXC_GPIO1_IO14_USDHC3_CD_B 0x060 0x2C8 0x598 0x4 0x2 +#define MX8MN_IOMUXC_GPIO1_IO14_PWM3_OUT 0x060 0x2C8 0x000 0x5 0x0 +#define MX8MN_IOMUXC_GPIO1_IO14_CCMSRCGPCMIX_CLKO1 0x060 0x2C8 0x000 0x6 0x0 +#define MX8MN_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x064 0x2CC 0x000 0x0 0x0 +#define MX8MN_IOMUXC_GPIO1_IO15_USDHC3_WP 0x064 0x2CC 0x5B8 0x4 0x2 +#define MX8MN_IOMUXC_GPIO1_IO15_PWM4_OUT 0x064 0x2CC 0x000 0x5 0x0 +#define MX8MN_IOMUXC_GPIO1_IO15_CCMSRCGPCMIX_CLKO2 0x064 0x2CC 0x000 0x6 0x0 +#define MX8MN_IOMUXC_ENET_MDC_ENET1_MDC 0x068 0x2D0 0x000 0x0 0x0 +#define MX8MN_IOMUXC_ENET_MDC_SAI6_TX_DATA0 0x068 0x2D0 0x000 0x2 0x0 +#define MX8MN_IOMUXC_ENET_MDC_PDM_BIT_STREAM3 0x068 0x2D0 0x540 0x3 0x1 +#define MX8MN_IOMUXC_ENET_MDC_SPDIF1_OUT 0x068 0x2D0 0x000 0x4 0x0 +#define MX8MN_IOMUXC_ENET_MDC_GPIO1_IO16 0x068 0x2D0 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ENET_MDC_USDHC3_STROBE 0x068 0x2D0 0x59C 0x6 0x1 +#define MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO 0x06C 0x2D4 0x4C0 0x0 0x1 +#define MX8MN_IOMUXC_ENET_MDIO_SAI6_TX_SYNC 0x06C 0x2D4 0x000 0x2 0x0 +#define MX8MN_IOMUXC_ENET_MDIO_PDM_BIT_STREAM2 0x06C 0x2D4 0x53C 0x3 0x1 +#define MX8MN_IOMUXC_ENET_MDIO_SPDIF1_IN 0x06C 0x2D4 0x5CC 0x4 0x1 +#define MX8MN_IOMUXC_ENET_MDIO_GPIO1_IO17 0x06C 0x2D4 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ENET_MDIO_USDHC3_DATA5 0x06C 0x2D4 0x550 0x6 0x1 +#define MX8MN_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x070 0x2D8 0x000 0x0 0x0 +#define MX8MN_IOMUXC_ENET_TD3_SAI6_TX_BCLK 0x070 0x2D8 0x000 0x2 0x0 +#define MX8MN_IOMUXC_ENET_TD3_PDM_BIT_STREAM1 0x070 0x2D8 0x538 0x3 0x1 +#define MX8MN_IOMUXC_ENET_TD3_SPDIF1_EXT_CLK 0x070 0x2D8 0x568 0x4 0x1 +#define MX8MN_IOMUXC_ENET_TD3_GPIO1_IO18 0x070 0x2D8 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ENET_TD3_USDHC3_DATA6 0x070 0x2D8 0x584 0x6 0x1 +#define MX8MN_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x074 0x2DC 0x000 0x0 0x0 +#define MX8MN_IOMUXC_ENET_TD2_ENET1_TX_CLK 0x074 0x2DC 0x5A4 0x1 0x0 +#define MX8MN_IOMUXC_ENET_TD2_CCMSRCGPCMIX_ENET_REF_CLK_ROOT 0x074 0x2DC 0x5A4 0x1 0x0 +#define MX8MN_IOMUXC_ENET_TD2_SAI6_RX_DATA0 0x074 0x2DC 0x000 0x2 0x0 +#define MX8MN_IOMUXC_ENET_TD2_PDM_BIT_STREAM3 0x074 0x2DC 0x540 0x3 0x2 +#define MX8MN_IOMUXC_ENET_TD2_GPIO1_IO19 0x074 0x2DC 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ENET_TD2_USDHC3_DATA7 0x074 0x2DC 0x54C 0x6 0x1 +#define MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x078 0x2E0 0x000 0x0 0x0 +#define MX8MN_IOMUXC_ENET_TD1_SAI6_RX_SYNC 0x078 0x2E0 0x000 0x2 0x0 +#define MX8MN_IOMUXC_ENET_TD1_PDM_BIT_STREAM2 0x078 0x2E0 0x53C 0x3 0x2 +#define MX8MN_IOMUXC_ENET_TD1_GPIO1_IO20 0x078 0x2E0 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ENET_TD1_USDHC3_CD_B 0x078 0x2E0 0x598 0x6 0x3 +#define MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x07C 0x2E4 0x000 0x0 0x0 +#define MX8MN_IOMUXC_ENET_TD0_SAI6_RX_BCLK 0x07C 0x2E4 0x000 0x2 0x0 +#define MX8MN_IOMUXC_ENET_TD0_PDM_BIT_STREAM1 0x07C 0x2E4 0x538 0x3 0x2 +#define MX8MN_IOMUXC_ENET_TD0_GPIO1_IO21 0x07C 0x2E4 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ENET_TD0_USDHC3_WP 0x07C 0x2E4 0x5B8 0x6 0x3 +#define MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x080 0x2E8 0x000 0x0 0x0 +#define MX8MN_IOMUXC_ENET_TX_CTL_SAI6_MCLK 0x080 0x2E8 0x000 0x2 0x0 +#define MX8MN_IOMUXC_ENET_TX_CTL_GPIO1_IO22 0x080 0x2E8 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ENET_TX_CTL_USDHC3_DATA0 0x080 0x2E8 0x5B4 0x6 0x1 +#define MX8MN_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x084 0x2EC 0x000 0x0 0x0 +#define MX8MN_IOMUXC_ENET_TXC_ENET1_TX_ER 0x084 0x2EC 0x000 0x1 0x0 +#define MX8MN_IOMUXC_ENET_TXC_SAI7_TX_DATA0 0x084 0x2EC 0x000 0x2 0x0 +#define MX8MN_IOMUXC_ENET_TXC_GPIO1_IO23 0x084 0x2EC 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ENET_TXC_USDHC3_DATA1 0x084 0x2EC 0x5B0 0x6 0x1 +#define MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x088 0x2F0 0x574 0x0 0x0 +#define MX8MN_IOMUXC_ENET_RX_CTL_SAI7_TX_SYNC 0x088 0x2F0 0x000 0x2 0x0 +#define MX8MN_IOMUXC_ENET_RX_CTL_PDM_BIT_STREAM3 0x088 0x2F0 0x540 0x3 0x3 +#define MX8MN_IOMUXC_ENET_RX_CTL_GPIO1_IO24 0x088 0x2F0 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ENET_RX_CTL_USDHC3_DATA2 0x088 0x2F0 0x5E4 0x6 0x1 +#define MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x08C 0x2F4 0x000 0x0 0x0 +#define MX8MN_IOMUXC_ENET_RXC_ENET1_RX_ER 0x08C 0x2F4 0x5C8 0x1 0x0 +#define MX8MN_IOMUXC_ENET_RXC_SAI7_TX_BCLK 0x08C 0x2F4 0x000 0x2 0x0 +#define MX8MN_IOMUXC_ENET_RXC_PDM_BIT_STREAM2 0x08C 0x2F4 0x53C 0x3 0x3 +#define MX8MN_IOMUXC_ENET_RXC_GPIO1_IO25 0x08C 0x2F4 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ENET_RXC_USDHC3_DATA3 0x08C 0x2F4 0x5E0 0x6 0x1 +#define MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x090 0x2F8 0x57C 0x0 0x0 +#define MX8MN_IOMUXC_ENET_RD0_SAI7_RX_DATA0 0x090 0x2F8 0x000 0x2 0x0 +#define MX8MN_IOMUXC_ENET_RD0_PDM_BIT_STREAM1 0x090 0x2F8 0x538 0x3 0x3 +#define MX8MN_IOMUXC_ENET_RD0_GPIO1_IO26 0x090 0x2F8 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ENET_RD0_USDHC3_DATA4 0x090 0x2F8 0x558 0x6 0x1 +#define MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x094 0x2FC 0x554 0x0 0x0 +#define MX8MN_IOMUXC_ENET_RD1_SAI7_RX_SYNC 0x094 0x2FC 0x000 0x2 0x0 +#define MX8MN_IOMUXC_ENET_RD1_PDM_BIT_STREAM0 0x094 0x2FC 0x534 0x3 0x1 +#define MX8MN_IOMUXC_ENET_RD1_GPIO1_IO27 0x094 0x2FC 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ENET_RD1_USDHC3_RESET_B 0x094 0x2FC 0x000 0x6 0x0 +#define MX8MN_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x098 0x300 0x000 0x0 0x0 +#define MX8MN_IOMUXC_ENET_RD2_SAI7_RX_BCLK 0x098 0x300 0x000 0x2 0x0 +#define MX8MN_IOMUXC_ENET_RD2_PDM_CLK 0x098 0x300 0x000 0x3 0x0 +#define MX8MN_IOMUXC_ENET_RD2_GPIO1_IO28 0x098 0x300 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ENET_RD2_USDHC3_CLK 0x098 0x300 0x5A0 0x6 0x1 +#define MX8MN_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x09C 0x304 0x000 0x0 0x0 +#define MX8MN_IOMUXC_ENET_RD3_SAI7_MCLK 0x09C 0x304 0x000 0x2 0x0 +#define MX8MN_IOMUXC_ENET_RD3_SPDIF1_IN 0x09C 0x304 0x5CC 0x3 0x5 +#define MX8MN_IOMUXC_ENET_RD3_GPIO1_IO29 0x09C 0x304 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ENET_RD3_USDHC3_CMD 0x09C 0x304 0x5DC 0x6 0x1 +#define MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK 0x0A0 0x308 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SD1_CLK_ENET1_MDC 0x0A0 0x308 0x000 0x1 0x0 +#define MX8MN_IOMUXC_SD1_CLK_UART1_DCE_TX 0x0A0 0x308 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SD1_CLK_UART1_DTE_RX 0x0A0 0x308 0x4F4 0x4 0x4 +#define MX8MN_IOMUXC_SD1_CLK_GPIO2_IO0 0x0A0 0x308 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD 0x0A4 0x30C 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SD1_CMD_ENET1_MDIO 0x0A4 0x30C 0x4C0 0x1 0x3 +#define MX8MN_IOMUXC_SD1_CMD_UART1_DCE_RX 0x0A4 0x30C 0x4F4 0x4 0x5 +#define MX8MN_IOMUXC_SD1_CMD_UART1_DTE_TX 0x0A4 0x30C 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SD1_CMD_GPIO2_IO1 0x0A4 0x30C 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x0A8 0x310 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SD1_DATA0_ENET1_RGMII_TD1 0x0A8 0x310 0x000 0x1 0x0 +#define MX8MN_IOMUXC_SD1_DATA0_UART1_DCE_RTS_B 0x0A8 0x310 0x4F0 0x4 0x4 +#define MX8MN_IOMUXC_SD1_DATA0_UART1_DTE_CTS_B 0x0A8 0x310 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SD1_DATA0_GPIO2_IO2 0x0A8 0x310 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x0AC 0x314 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SD1_DATA1_ENET1_RGMII_TD0 0x0AC 0x314 0x000 0x1 0x0 +#define MX8MN_IOMUXC_SD1_DATA1_UART1_DCE_CTS_B 0x0AC 0x314 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SD1_DATA1_UART1_DTE_RTS_B 0x0AC 0x314 0x4F0 0x4 0x5 +#define MX8MN_IOMUXC_SD1_DATA1_GPIO2_IO3 0x0AC 0x314 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x0B0 0x318 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SD1_DATA2_ENET1_RGMII_RD0 0x0B0 0x318 0x57C 0x1 0x1 +#define MX8MN_IOMUXC_SD1_DATA2_UART2_DCE_TX 0x0B0 0x318 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SD1_DATA2_UART2_DTE_RX 0x0B0 0x318 0x4FC 0x4 0x4 +#define MX8MN_IOMUXC_SD1_DATA2_GPIO2_IO4 0x0B0 0x318 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x0B4 0x31C 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SD1_DATA3_ENET1_RGMII_RD1 0x0B4 0x31C 0x554 0x1 0x1 +#define MX8MN_IOMUXC_SD1_DATA3_UART2_DCE_RX 0x0B4 0x31C 0x4FC 0x4 0x5 +#define MX8MN_IOMUXC_SD1_DATA3_UART2_DTE_TX 0x0B4 0x31C 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SD1_DATA3_GPIO2_IO5 0x0B4 0x31C 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x0B8 0x320 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SD1_DATA4_ENET1_RGMII_TX_CTL 0x0B8 0x320 0x000 0x1 0x0 +#define MX8MN_IOMUXC_SD1_DATA4_I2C1_SCL 0x0B8 0x320 0x55C 0x3 0x1 +#define MX8MN_IOMUXC_SD1_DATA4_UART2_DCE_RTS_B 0x0B8 0x320 0x4F8 0x4 0x4 +#define MX8MN_IOMUXC_SD1_DATA4_UART2_DTE_CTS_B 0x0B8 0x320 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SD1_DATA4_GPIO2_IO6 0x0B8 0x320 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x0BC 0x324 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SD1_DATA5_ENET1_TX_ER 0x0BC 0x324 0x000 0x1 0x0 +#define MX8MN_IOMUXC_SD1_DATA5_I2C1_SDA 0x0BC 0x324 0x56C 0x3 0x1 +#define MX8MN_IOMUXC_SD1_DATA5_UART2_DCE_CTS_B 0x0BC 0x324 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SD1_DATA5_UART2_DTE_RTS_B 0x0BC 0x324 0x4F8 0x4 0x5 +#define MX8MN_IOMUXC_SD1_DATA5_GPIO2_IO7 0x0BC 0x324 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x0C0 0x328 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SD1_DATA6_ENET1_RGMII_RX_CTL 0x0C0 0x328 0x574 0x1 0x1 +#define MX8MN_IOMUXC_SD1_DATA6_I2C2_SCL 0x0C0 0x328 0x5D0 0x3 0x1 +#define MX8MN_IOMUXC_SD1_DATA6_UART3_DCE_TX 0x0C0 0x328 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SD1_DATA6_UART3_DTE_RX 0x0C0 0x328 0x504 0x4 0x4 +#define MX8MN_IOMUXC_SD1_DATA6_GPIO2_IO8 0x0C0 0x328 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x0C4 0x32C 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SD1_DATA7_ENET1_RX_ER 0x0C4 0x32C 0x5C8 0x1 0x1 +#define MX8MN_IOMUXC_SD1_DATA7_I2C2_SDA 0x0C4 0x32C 0x560 0x3 0x1 +#define MX8MN_IOMUXC_SD1_DATA7_UART3_DCE_RX 0x0C4 0x32C 0x504 0x4 0x5 +#define MX8MN_IOMUXC_SD1_DATA7_UART3_DTE_TX 0x0C4 0x32C 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SD1_DATA7_GPIO2_IO9 0x0C4 0x32C 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0x0C8 0x330 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SD1_RESET_B_ENET1_TX_CLK 0x0C8 0x330 0x5A4 0x1 0x1 +#define MX8MN_IOMUXC_SD1_RESET_B_CCMSRCGPCMIX_ENET_REF_CLK_ROOT 0x0C8 0x330 0x5A4 0x1 0x0 +#define MX8MN_IOMUXC_SD1_RESET_B_I2C3_SCL 0x0C8 0x330 0x588 0x3 0x1 +#define MX8MN_IOMUXC_SD1_RESET_B_UART3_DCE_RTS_B 0x0C8 0x330 0x500 0x4 0x2 +#define MX8MN_IOMUXC_SD1_RESET_B_UART3_DTE_CTS_B 0x0C8 0x330 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SD1_RESET_B_GPIO2_IO10 0x0C8 0x330 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x0CC 0x334 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SD1_STROBE_I2C3_SDA 0x0CC 0x334 0x5BC 0x3 0x1 +#define MX8MN_IOMUXC_SD1_STROBE_UART3_DCE_CTS_B 0x0CC 0x334 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SD1_STROBE_UART3_DTE_RTS_B 0x0CC 0x334 0x500 0x4 0x3 +#define MX8MN_IOMUXC_SD1_STROBE_GPIO2_IO11 0x0CC 0x334 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SD2_CD_B_USDHC2_CD_B 0x0D0 0x338 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SD2_CD_B_GPIO2_IO12 0x0D0 0x338 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SD2_CD_B_CCMSRCGPCMIX_TESTER_ACK 0x0D0 0x338 0x000 0x6 0x0 +#define MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x0D4 0x33C 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SD2_CLK_SAI5_RX_SYNC 0x0D4 0x33C 0x4E4 0x1 0x1 +#define MX8MN_IOMUXC_SD2_CLK_ECSPI2_SCLK 0x0D4 0x33C 0x580 0x2 0x1 +#define MX8MN_IOMUXC_SD2_CLK_UART4_DCE_RX 0x0D4 0x33C 0x50C 0x3 0x4 +#define MX8MN_IOMUXC_SD2_CLK_UART4_DTE_TX 0x0D4 0x33C 0x000 0x3 0x0 +#define MX8MN_IOMUXC_SD2_CLK_SAI5_MCLK 0x0D4 0x33C 0x594 0x4 0x1 +#define MX8MN_IOMUXC_SD2_CLK_GPIO2_IO13 0x0D4 0x33C 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SD2_CLK_CCMSRCGPCMIX_OBSERVE0 0x0D4 0x33C 0x000 0x6 0x0 +#define MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x0D8 0x340 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SD2_CMD_SAI5_RX_BCLK 0x0D8 0x340 0x4D0 0x1 0x1 +#define MX8MN_IOMUXC_SD2_CMD_ECSPI2_MOSI 0x0D8 0x340 0x590 0x2 0x1 +#define MX8MN_IOMUXC_SD2_CMD_UART4_DCE_TX 0x0D8 0x340 0x000 0x3 0x0 +#define MX8MN_IOMUXC_SD2_CMD_UART4_DTE_RX 0x0D8 0x340 0x50C 0x3 0x5 +#define MX8MN_IOMUXC_SD2_CMD_PDM_CLK 0x0D8 0x340 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SD2_CMD_GPIO2_IO14 0x0D8 0x340 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SD2_CMD_CCMSRCGPCMIX_OBSERVE1 0x0D8 0x340 0x000 0x6 0x0 +#define MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x0DC 0x344 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SD2_DATA0_SAI5_RX_DATA0 0x0DC 0x344 0x4D4 0x1 0x1 +#define MX8MN_IOMUXC_SD2_DATA0_I2C4_SDA 0x0DC 0x344 0x58C 0x2 0x1 +#define MX8MN_IOMUXC_SD2_DATA0_UART2_DCE_RX 0x0DC 0x344 0x4FC 0x3 0x6 +#define MX8MN_IOMUXC_SD2_DATA0_UART2_DTE_TX 0x0DC 0x344 0x000 0x3 0x0 +#define MX8MN_IOMUXC_SD2_DATA0_PDM_BIT_STREAM0 0x0DC 0x344 0x534 0x4 0x2 +#define MX8MN_IOMUXC_SD2_DATA0_GPIO2_IO15 0x0DC 0x344 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SD2_DATA0_CCMSRCGPCMIX_OBSERVE2 0x0DC 0x344 0x000 0x6 0x0 +#define MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x0E0 0x348 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SD2_DATA1_SAI5_TX_SYNC 0x0E0 0x348 0x4EC 0x1 0x1 +#define MX8MN_IOMUXC_SD2_DATA1_I2C4_SCL 0x0E0 0x348 0x5D4 0x2 0x1 +#define MX8MN_IOMUXC_SD2_DATA1_UART2_DCE_TX 0x0E0 0x348 0x000 0x3 0x0 +#define MX8MN_IOMUXC_SD2_DATA1_UART2_DTE_RX 0x0E0 0x348 0x4FC 0x3 0x7 +#define MX8MN_IOMUXC_SD2_DATA1_PDM_BIT_STREAM1 0x0E0 0x348 0x538 0x4 0x4 +#define MX8MN_IOMUXC_SD2_DATA1_GPIO2_IO16 0x0E0 0x348 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SD2_DATA1_CCMSRCGPCMIX_WAIT 0x0E0 0x348 0x000 0x6 0x0 +#define MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x0E4 0x34C 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SD2_DATA2_SAI5_TX_BCLK 0x0E4 0x34C 0x4E8 0x1 0x1 +#define MX8MN_IOMUXC_SD2_DATA2_ECSPI2_SS0 0x0E4 0x34C 0x570 0x2 0x2 +#define MX8MN_IOMUXC_SD2_DATA2_SPDIF1_OUT 0x0E4 0x34C 0x000 0x3 0x0 +#define MX8MN_IOMUXC_SD2_DATA2_PDM_BIT_STREAM2 0x0E4 0x34C 0x53C 0x4 0x4 +#define MX8MN_IOMUXC_SD2_DATA2_GPIO2_IO17 0x0E4 0x34C 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SD2_DATA2_CCMSRCGPCMIX_STOP 0x0E4 0x34C 0x000 0x6 0x0 +#define MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x0E8 0x350 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SD2_DATA3_SAI5_TX_DATA0 0x0E8 0x350 0x000 0x1 0x0 +#define MX8MN_IOMUXC_SD2_DATA3_ECSPI2_MISO 0x0E8 0x350 0x578 0x2 0x1 +#define MX8MN_IOMUXC_SD2_DATA3_SPDIF1_IN 0x0E8 0x350 0x5CC 0x3 0x2 +#define MX8MN_IOMUXC_SD2_DATA3_PDM_BIT_STREAM3 0x0E8 0x350 0x540 0x4 0x4 +#define MX8MN_IOMUXC_SD2_DATA3_GPIO2_IO18 0x0E8 0x350 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SD2_DATA3_CCMSRCGPCMIX_EARLY_RESET 0x0E8 0x350 0x000 0x6 0x0 +#define MX8MN_IOMUXC_SD2_RESET_B_USDHC2_RESET_B 0x0EC 0x354 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x0EC 0x354 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SD2_RESET_B_CCMSRCGPCMIX_SYSTEM_RESET 0x0EC 0x354 0x000 0x6 0x0 +#define MX8MN_IOMUXC_SD2_WP_USDHC2_WP 0x0F0 0x358 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SD2_WP_GPIO2_IO20 0x0F0 0x358 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SD2_WP_CORESIGHT_EVENTI 0x0F0 0x358 0x000 0x6 0x0 +#define MX8MN_IOMUXC_NAND_ALE_RAWNAND_ALE 0x0F4 0x35C 0x000 0x0 0x0 +#define MX8MN_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x0F4 0x35C 0x000 0x1 0x0 +#define MX8MN_IOMUXC_NAND_ALE_PDM_BIT_STREAM0 0x0F4 0x35C 0x534 0x3 0x3 +#define MX8MN_IOMUXC_NAND_ALE_UART3_DCE_RX 0x0F4 0x35C 0x504 0x4 0x6 +#define MX8MN_IOMUXC_NAND_ALE_UART3_DTE_TX 0x0F4 0x35C 0x000 0x4 0x0 +#define MX8MN_IOMUXC_NAND_ALE_GPIO3_IO0 0x0F4 0x35C 0x000 0x5 0x0 +#define MX8MN_IOMUXC_NAND_ALE_CORESIGHT_TRACE_CLK 0x0F4 0x35C 0x000 0x6 0x0 +#define MX8MN_IOMUXC_NAND_CE0_B_RAWNAND_CE0_B 0x0F8 0x360 0x000 0x0 0x0 +#define MX8MN_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x0F8 0x360 0x000 0x1 0x0 +#define MX8MN_IOMUXC_NAND_CE0_B_PDM_BIT_STREAM1 0x0F8 0x360 0x538 0x3 0x5 +#define MX8MN_IOMUXC_NAND_CE0_B_UART3_DCE_TX 0x0F8 0x360 0x000 0x4 0x0 +#define MX8MN_IOMUXC_NAND_CE0_B_UART3_DTE_RX 0x0F8 0x360 0x504 0x4 0x7 +#define MX8MN_IOMUXC_NAND_CE0_B_GPIO3_IO1 0x0F8 0x360 0x000 0x5 0x0 +#define MX8MN_IOMUXC_NAND_CE0_B_CORESIGHT_TRACE_CTL 0x0F8 0x360 0x000 0x6 0x0 +#define MX8MN_IOMUXC_NAND_CE1_B_RAWNAND_CE1_B 0x0FC 0x364 0x000 0x0 0x0 +#define MX8MN_IOMUXC_NAND_CE1_B_QSPI_A_SS1_B 0x0FC 0x364 0x000 0x1 0x0 +#define MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x0FC 0x364 0x59C 0x2 0x0 +#define MX8MN_IOMUXC_NAND_CE1_B_PDM_BIT_STREAM0 0x0FC 0x364 0x534 0x3 0x4 +#define MX8MN_IOMUXC_NAND_CE1_B_I2C4_SCL 0x0FC 0x364 0x5D4 0x4 0x2 +#define MX8MN_IOMUXC_NAND_CE1_B_GPIO3_IO2 0x0FC 0x364 0x000 0x5 0x0 +#define MX8MN_IOMUXC_NAND_CE1_B_CORESIGHT_TRACE0 0x0FC 0x364 0x000 0x6 0x0 +#define MX8MN_IOMUXC_NAND_CE2_B_RAWNAND_CE2_B 0x100 0x368 0x000 0x0 0x0 +#define MX8MN_IOMUXC_NAND_CE2_B_QSPI_B_SS0_B 0x100 0x368 0x000 0x1 0x0 +#define MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x100 0x368 0x550 0x2 0x0 +#define MX8MN_IOMUXC_NAND_CE2_B_PDM_BIT_STREAM1 0x100 0x368 0x538 0x3 0x6 +#define MX8MN_IOMUXC_NAND_CE2_B_I2C4_SDA 0x100 0x368 0x58C 0x4 0x2 +#define MX8MN_IOMUXC_NAND_CE2_B_GPIO3_IO3 0x100 0x368 0x000 0x5 0x0 +#define MX8MN_IOMUXC_NAND_CE2_B_CORESIGHT_TRACE1 0x100 0x368 0x000 0x6 0x0 +#define MX8MN_IOMUXC_NAND_CE3_B_RAWNAND_CE3_B 0x104 0x36C 0x000 0x0 0x0 +#define MX8MN_IOMUXC_NAND_CE3_B_QSPI_B_SS1_B 0x104 0x36C 0x000 0x1 0x0 +#define MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x104 0x36C 0x584 0x2 0x0 +#define MX8MN_IOMUXC_NAND_CE3_B_PDM_BIT_STREAM2 0x104 0x36C 0x53C 0x3 0x5 +#define MX8MN_IOMUXC_NAND_CE3_B_I2C3_SDA 0x104 0x36C 0x5BC 0x4 0x2 +#define MX8MN_IOMUXC_NAND_CE3_B_GPIO3_IO4 0x104 0x36C 0x000 0x5 0x0 +#define MX8MN_IOMUXC_NAND_CE3_B_CORESIGHT_TRACE2 0x104 0x36C 0x000 0x6 0x0 +#define MX8MN_IOMUXC_NAND_CLE_RAWNAND_CLE 0x108 0x370 0x000 0x0 0x0 +#define MX8MN_IOMUXC_NAND_CLE_QSPI_B_SCLK 0x108 0x370 0x000 0x1 0x0 +#define MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x108 0x370 0x54C 0x2 0x0 +#define MX8MN_IOMUXC_NAND_CLE_GPIO3_IO5 0x108 0x370 0x000 0x5 0x0 +#define MX8MN_IOMUXC_NAND_CLE_CORESIGHT_TRACE3 0x108 0x370 0x000 0x6 0x0 +#define MX8MN_IOMUXC_NAND_DATA00_RAWNAND_DATA00 0x10C 0x374 0x000 0x0 0x0 +#define MX8MN_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x10C 0x374 0x000 0x1 0x0 +#define MX8MN_IOMUXC_NAND_DATA00_PDM_BIT_STREAM2 0x10C 0x374 0x53C 0x3 0x6 +#define MX8MN_IOMUXC_NAND_DATA00_UART4_DCE_RX 0x10C 0x374 0x50C 0x4 0x6 +#define MX8MN_IOMUXC_NAND_DATA00_UART4_DTE_TX 0x10C 0x374 0x000 0x4 0x0 +#define MX8MN_IOMUXC_NAND_DATA00_GPIO3_IO6 0x10C 0x374 0x000 0x5 0x0 +#define MX8MN_IOMUXC_NAND_DATA00_CORESIGHT_TRACE4 0x10C 0x374 0x000 0x6 0x0 +#define MX8MN_IOMUXC_NAND_DATA01_RAWNAND_DATA01 0x110 0x378 0x000 0x0 0x0 +#define MX8MN_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x110 0x378 0x000 0x1 0x0 +#define MX8MN_IOMUXC_NAND_DATA01_PDM_BIT_STREAM3 0x110 0x378 0x540 0x3 0x5 +#define MX8MN_IOMUXC_NAND_DATA01_UART4_DCE_TX 0x110 0x378 0x000 0x4 0x0 +#define MX8MN_IOMUXC_NAND_DATA01_UART4_DTE_RX 0x110 0x378 0x50C 0x4 0x7 +#define MX8MN_IOMUXC_NAND_DATA01_GPIO3_IO7 0x110 0x378 0x000 0x5 0x0 +#define MX8MN_IOMUXC_NAND_DATA01_CORESIGHT_TRACE5 0x110 0x378 0x000 0x6 0x0 +#define MX8MN_IOMUXC_NAND_DATA02_RAWNAND_DATA02 0x114 0x37C 0x000 0x0 0x0 +#define MX8MN_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x114 0x37C 0x000 0x1 0x0 +#define MX8MN_IOMUXC_NAND_DATA02_USDHC3_CD_B 0x114 0x37C 0x598 0x2 0x0 +#define MX8MN_IOMUXC_NAND_DATA02_I2C4_SDA 0x114 0x37C 0x58C 0x4 0x3 +#define MX8MN_IOMUXC_NAND_DATA02_GPIO3_IO8 0x114 0x37C 0x000 0x5 0x0 +#define MX8MN_IOMUXC_NAND_DATA02_CORESIGHT_TRACE6 0x114 0x37C 0x000 0x6 0x0 +#define MX8MN_IOMUXC_NAND_DATA03_RAWNAND_DATA03 0x118 0x380 0x000 0x0 0x0 +#define MX8MN_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x118 0x380 0x000 0x1 0x0 +#define MX8MN_IOMUXC_NAND_DATA03_USDHC3_WP 0x118 0x380 0x5B8 0x2 0x0 +#define MX8MN_IOMUXC_NAND_DATA03_GPIO3_IO9 0x118 0x380 0x000 0x5 0x0 +#define MX8MN_IOMUXC_NAND_DATA03_CORESIGHT_TRACE7 0x118 0x380 0x000 0x6 0x0 +#define MX8MN_IOMUXC_NAND_DATA04_RAWNAND_DATA04 0x11C 0x384 0x000 0x0 0x0 +#define MX8MN_IOMUXC_NAND_DATA04_QSPI_B_DATA0 0x11C 0x384 0x000 0x1 0x0 +#define MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x11C 0x384 0x5B4 0x2 0x0 +#define MX8MN_IOMUXC_NAND_DATA04_GPIO3_IO10 0x11C 0x384 0x000 0x5 0x0 +#define MX8MN_IOMUXC_NAND_DATA04_CORESIGHT_TRACE8 0x11C 0x384 0x000 0x6 0x0 +#define MX8MN_IOMUXC_NAND_DATA05_RAWNAND_DATA05 0x120 0x388 0x000 0x0 0x0 +#define MX8MN_IOMUXC_NAND_DATA05_QSPI_B_DATA1 0x120 0x388 0x000 0x1 0x0 +#define MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x120 0x388 0x5B0 0x2 0x0 +#define MX8MN_IOMUXC_NAND_DATA05_GPIO3_IO11 0x120 0x388 0x000 0x5 0x0 +#define MX8MN_IOMUXC_NAND_DATA05_CORESIGHT_TRACE9 0x120 0x388 0x000 0x6 0x0 +#define MX8MN_IOMUXC_NAND_DATA06_RAWNAND_DATA06 0x124 0x38C 0x000 0x0 0x0 +#define MX8MN_IOMUXC_NAND_DATA06_QSPI_B_DATA2 0x124 0x38C 0x000 0x1 0x0 +#define MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x124 0x38C 0x5E4 0x2 0x0 +#define MX8MN_IOMUXC_NAND_DATA06_GPIO3_IO12 0x124 0x38C 0x000 0x5 0x0 +#define MX8MN_IOMUXC_NAND_DATA06_CORESIGHT_TRACE10 0x124 0x38C 0x000 0x6 0x0 +#define MX8MN_IOMUXC_NAND_DATA07_RAWNAND_DATA07 0x128 0x390 0x000 0x0 0x0 +#define MX8MN_IOMUXC_NAND_DATA07_QSPI_B_DATA3 0x128 0x390 0x000 0x1 0x0 +#define MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x128 0x390 0x5E0 0x2 0x0 +#define MX8MN_IOMUXC_NAND_DATA07_GPIO3_IO13 0x128 0x390 0x000 0x5 0x0 +#define MX8MN_IOMUXC_NAND_DATA07_CORESIGHT_TRACE11 0x128 0x390 0x000 0x6 0x0 +#define MX8MN_IOMUXC_NAND_DQS_RAWNAND_DQS 0x12C 0x394 0x000 0x0 0x0 +#define MX8MN_IOMUXC_NAND_DQS_QSPI_A_DQS 0x12C 0x394 0x000 0x1 0x0 +#define MX8MN_IOMUXC_NAND_DQS_PDM_CLK 0x12C 0x394 0x000 0x3 0x0 +#define MX8MN_IOMUXC_NAND_DQS_I2C3_SCL 0x12C 0x394 0x588 0x4 0x2 +#define MX8MN_IOMUXC_NAND_DQS_GPIO3_IO14 0x12C 0x394 0x000 0x5 0x0 +#define MX8MN_IOMUXC_NAND_DQS_CORESIGHT_TRACE12 0x12C 0x394 0x000 0x6 0x0 +#define MX8MN_IOMUXC_NAND_RE_B_RAWNAND_RE_B 0x130 0x398 0x000 0x0 0x0 +#define MX8MN_IOMUXC_NAND_RE_B_QSPI_B_DQS 0x130 0x398 0x000 0x1 0x0 +#define MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x130 0x398 0x558 0x2 0x0 +#define MX8MN_IOMUXC_NAND_RE_B_PDM_BIT_STREAM1 0x130 0x398 0x538 0x3 0x7 +#define MX8MN_IOMUXC_NAND_RE_B_GPIO3_IO15 0x130 0x398 0x000 0x5 0x0 +#define MX8MN_IOMUXC_NAND_RE_B_CORESIGHT_TRACE13 0x130 0x398 0x000 0x6 0x0 +#define MX8MN_IOMUXC_NAND_READY_B_RAWNAND_READY_B 0x134 0x39C 0x000 0x0 0x0 +#define MX8MN_IOMUXC_NAND_READY_B_USDHC3_RESET_B 0x134 0x39C 0x000 0x2 0x0 +#define MX8MN_IOMUXC_NAND_READY_B_PDM_BIT_STREAM3 0x134 0x39C 0x540 0x3 0x6 +#define MX8MN_IOMUXC_NAND_READY_B_I2C3_SCL 0x134 0x39C 0x588 0x4 0x3 +#define MX8MN_IOMUXC_NAND_READY_B_GPIO3_IO16 0x134 0x39C 0x000 0x5 0x0 +#define MX8MN_IOMUXC_NAND_READY_B_CORESIGHT_TRACE14 0x134 0x39C 0x000 0x6 0x0 +#define MX8MN_IOMUXC_NAND_WE_B_RAWNAND_WE_B 0x138 0x3A0 0x000 0x0 0x0 +#define MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x138 0x3A0 0x5A0 0x2 0x0 +#define MX8MN_IOMUXC_NAND_WE_B_I2C3_SDA 0x138 0x3A0 0x5BC 0x4 0x3 +#define MX8MN_IOMUXC_NAND_WE_B_GPIO3_IO17 0x138 0x3A0 0x000 0x5 0x0 +#define MX8MN_IOMUXC_NAND_WE_B_CORESIGHT_TRACE15 0x138 0x3A0 0x000 0x6 0x0 +#define MX8MN_IOMUXC_NAND_WP_B_RAWNAND_WP_B 0x13C 0x3A4 0x000 0x0 0x0 +#define MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x13C 0x3A4 0x5DC 0x2 0x0 +#define MX8MN_IOMUXC_NAND_WP_B_I2C4_SDA 0x13C 0x3A4 0x58C 0x4 0x4 +#define MX8MN_IOMUXC_NAND_WP_B_GPIO3_IO18 0x13C 0x3A4 0x000 0x5 0x0 +#define MX8MN_IOMUXC_NAND_WP_B_CORESIGHT_EVENTO 0x13C 0x3A4 0x000 0x6 0x0 +#define MX8MN_IOMUXC_SAI5_RXFS_SAI5_RX_SYNC 0x140 0x3A8 0x4E4 0x0 0x0 +#define MX8MN_IOMUXC_SAI5_RXFS_GPIO3_IO19 0x140 0x3A8 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SAI5_RXC_SAI5_RX_BCLK 0x144 0x3AC 0x4D0 0x0 0x0 +#define MX8MN_IOMUXC_SAI5_RXC_PDM_CLK 0x144 0x3AC 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SAI5_RXC_GPIO3_IO20 0x144 0x3AC 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SAI5_RXD0_SAI5_RX_DATA0 0x148 0x3B0 0x4D4 0x0 0x0 +#define MX8MN_IOMUXC_SAI5_RXD0_PDM_BIT_STREAM0 0x148 0x3B0 0x534 0x4 0x0 +#define MX8MN_IOMUXC_SAI5_RXD0_GPIO3_IO21 0x148 0x3B0 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SAI5_RXD1_SAI5_RX_DATA1 0x14C 0x3B4 0x4D8 0x0 0x0 +#define MX8MN_IOMUXC_SAI5_RXD1_SAI5_TX_SYNC 0x14C 0x3B4 0x4EC 0x3 0x0 +#define MX8MN_IOMUXC_SAI5_RXD1_PDM_BIT_STREAM1 0x14C 0x3B4 0x538 0x4 0x0 +#define MX8MN_IOMUXC_SAI5_RXD1_GPIO3_IO22 0x14C 0x3B4 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SAI5_RXD2_SAI5_RX_DATA2 0x150 0x3B8 0x4DC 0x0 0x0 +#define MX8MN_IOMUXC_SAI5_RXD2_SAI5_TX_BCLK 0x150 0x3B8 0x4E8 0x3 0x0 +#define MX8MN_IOMUXC_SAI5_RXD2_PDM_BIT_STREAM2 0x150 0x3B8 0x53C 0x4 0x0 +#define MX8MN_IOMUXC_SAI5_RXD2_GPIO3_IO23 0x150 0x3B8 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SAI5_RXD3_SAI5_RX_DATA3 0x154 0x3BC 0x4E0 0x0 0x0 +#define MX8MN_IOMUXC_SAI5_RXD3_SAI5_TX_DATA0 0x154 0x3BC 0x000 0x3 0x0 +#define MX8MN_IOMUXC_SAI5_RXD3_PDM_BIT_STREAM3 0x154 0x3BC 0x540 0x4 0x0 +#define MX8MN_IOMUXC_SAI5_RXD3_GPIO3_IO24 0x154 0x3BC 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SAI5_MCLK_SAI5_MCLK 0x158 0x3C0 0x594 0x0 0x0 +#define MX8MN_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x158 0x3C0 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SAI2_RXFS_SAI2_RX_SYNC 0x1B0 0x418 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SAI2_RXFS_SAI5_TX_SYNC 0x1B0 0x418 0x4EC 0x1 0x2 +#define MX8MN_IOMUXC_SAI2_RXFS_SAI5_TX_DATA1 0x1B0 0x418 0x000 0x2 0x0 +#define MX8MN_IOMUXC_SAI2_RXFS_SAI2_RX_DATA1 0x1B0 0x418 0x5AC 0x3 0x0 +#define MX8MN_IOMUXC_SAI2_RXFS_UART1_DCE_TX 0x1B0 0x418 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SAI2_RXFS_UART1_DTE_RX 0x1B0 0x418 0x4F4 0x4 0x2 +#define MX8MN_IOMUXC_SAI2_RXFS_GPIO4_IO21 0x1B0 0x418 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SAI2_RXFS_PDM_BIT_STREAM2 0x1B0 0x418 0x53C 0x6 0x7 +#define MX8MN_IOMUXC_SAI2_RXC_SAI2_RX_BCLK 0x1B4 0x41C 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SAI2_RXC_SAI5_TX_BCLK 0x1B4 0x41C 0x4E8 0x1 0x2 +#define MX8MN_IOMUXC_SAI2_RXC_UART1_DCE_RX 0x1B4 0x41C 0x4F4 0x4 0x3 +#define MX8MN_IOMUXC_SAI2_RXC_UART1_DTE_TX 0x1B4 0x41C 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SAI2_RXC_GPIO4_IO22 0x1B4 0x41C 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SAI2_RXC_PDM_BIT_STREAM1 0x1B4 0x41C 0x538 0x6 0x8 +#define MX8MN_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0 0x1B8 0x420 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SAI2_RXD0_SAI5_TX_DATA0 0x1B8 0x420 0x000 0x1 0x0 +#define MX8MN_IOMUXC_SAI2_RXD0_SAI2_TX_DATA1 0x1B8 0x420 0x000 0x3 0x0 +#define MX8MN_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B 0x1B8 0x420 0x4F0 0x4 0x2 +#define MX8MN_IOMUXC_SAI2_RXD0_UART1_DTE_CTS_B 0x1B8 0x420 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SAI2_RXD0_GPIO4_IO23 0x1B8 0x420 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SAI2_RXD0_PDM_BIT_STREAM3 0x1B8 0x420 0x540 0x6 0x7 +#define MX8MN_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0x1BC 0x424 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SAI2_TXFS_SAI5_TX_DATA1 0x1BC 0x424 0x000 0x1 0x0 +#define MX8MN_IOMUXC_SAI2_TXFS_SAI2_TX_DATA1 0x1BC 0x424 0x000 0x3 0x0 +#define MX8MN_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B 0x1BC 0x424 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SAI2_TXFS_UART1_DTE_RTS_B 0x1BC 0x424 0x4F0 0x4 0x3 +#define MX8MN_IOMUXC_SAI2_TXFS_GPIO4_IO24 0x1BC 0x424 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SAI2_TXFS_PDM_BIT_STREAM2 0x1BC 0x424 0x53C 0x6 0x8 +#define MX8MN_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0x1C0 0x428 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SAI2_TXC_SAI5_TX_DATA2 0x1C0 0x428 0x000 0x1 0x0 +#define MX8MN_IOMUXC_SAI2_TXC_GPIO4_IO25 0x1C0 0x428 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SAI2_TXC_PDM_BIT_STREAM1 0x1C0 0x428 0x538 0x6 0x9 +#define MX8MN_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0x1C4 0x42C 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SAI2_TXD0_SAI5_TX_DATA3 0x1C4 0x42C 0x000 0x1 0x0 +#define MX8MN_IOMUXC_SAI2_TXD0_GPIO4_IO26 0x1C4 0x42C 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SAI2_TXD0_CCMSRCGPCMIX_BOOT_MODE4 0x1C4 0x42C 0x540 0x6 0x8 +#define MX8MN_IOMUXC_SAI2_MCLK_SAI2_MCLK 0x1C8 0x430 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SAI2_MCLK_SAI5_MCLK 0x1C8 0x430 0x594 0x1 0x2 +#define MX8MN_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x1C8 0x430 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SAI2_MCLK_SAI3_MCLK 0x1C8 0x430 0x5C0 0x6 0x1 +#define MX8MN_IOMUXC_SAI3_RXFS_SAI3_RX_SYNC 0x1CC 0x434 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SAI3_RXFS_GPT1_CAPTURE1 0x1CC 0x434 0x5F0 0x1 0x0 +#define MX8MN_IOMUXC_SAI3_RXFS_SAI5_RX_SYNC 0x1CC 0x434 0x4E4 0x2 0x2 +#define MX8MN_IOMUXC_SAI3_RXFS_SAI3_RX_DATA1 0x1CC 0x434 0x000 0x3 0x0 +#define MX8MN_IOMUXC_SAI3_RXFS_SPDIF1_IN 0x1CC 0x434 0x5CC 0x4 0x3 +#define MX8MN_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x1CC 0x434 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SAI3_RXFS_PDM_BIT_STREAM0 0x1CC 0x434 0x534 0x6 0x5 +#define MX8MN_IOMUXC_SAI3_RXC_SAI3_RX_BCLK 0x1D0 0x438 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SAI3_RXC_GPT1_CLK 0x1D0 0x438 0x5E8 0x1 0x0 +#define MX8MN_IOMUXC_SAI3_RXC_SAI5_RX_BCLK 0x1D0 0x438 0x4D0 0x2 0x2 +#define MX8MN_IOMUXC_SAI3_RXC_SAI2_RX_DATA1 0x1D0 0x438 0x5AC 0x3 0x2 +#define MX8MN_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B 0x1D0 0x438 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SAI3_RXC_UART2_DTE_RTS_B 0x1D0 0x438 0x4F8 0x4 0x2 +#define MX8MN_IOMUXC_SAI3_RXC_GPIO4_IO29 0x1D0 0x438 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SAI3_RXC_PDM_CLK 0x1D0 0x438 0x000 0x6 0x0 +#define MX8MN_IOMUXC_SAI3_RXD_SAI3_RX_DATA0 0x1D4 0x43C 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SAI3_RXD_GPT1_COMPARE1 0x1D4 0x43C 0x000 0x1 0x0 +#define MX8MN_IOMUXC_SAI3_RXD_SAI5_RX_DATA0 0x1D4 0x43C 0x4D4 0x2 0x2 +#define MX8MN_IOMUXC_SAI3_RXD_SAI3_TX_DATA1 0x1D4 0x43C 0x000 0x3 0x0 +#define MX8MN_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B 0x1D4 0x43C 0x4F8 0x4 0x3 +#define MX8MN_IOMUXC_SAI3_RXD_UART2_DTE_CTS_B 0x1D4 0x43C 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SAI3_RXD_GPIO4_IO30 0x1D4 0x43C 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SAI3_RXD_PDM_BIT_STREAM1 0x1D4 0x43C 0x538 0x6 0x10 +#define MX8MN_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0x1D8 0x440 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SAI3_TXFS_GPT1_CAPTURE2 0x1D8 0x440 0x5EC 0x1 0x0 +#define MX8MN_IOMUXC_SAI3_TXFS_SAI5_RX_DATA1 0x1D8 0x440 0x4D8 0x2 0x1 +#define MX8MN_IOMUXC_SAI3_TXFS_SAI3_TX_DATA1 0x1D8 0x440 0x000 0x3 0x0 +#define MX8MN_IOMUXC_SAI3_TXFS_UART2_DCE_RX 0x1D8 0x440 0x4FC 0x4 0x2 +#define MX8MN_IOMUXC_SAI3_TXFS_UART2_DTE_TX 0x1D8 0x440 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SAI3_TXFS_GPIO4_IO31 0x1D8 0x440 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SAI3_TXFS_PDM_BIT_STREAM3 0x1D8 0x440 0x540 0x6 0x9 +#define MX8MN_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0x1DC 0x444 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SAI3_TXC_GPT1_COMPARE2 0x1DC 0x444 0x000 0x1 0x0 +#define MX8MN_IOMUXC_SAI3_TXC_SAI5_RX_DATA2 0x1DC 0x444 0x4DC 0x2 0x1 +#define MX8MN_IOMUXC_SAI3_TXC_SAI2_TX_DATA1 0x1DC 0x444 0x000 0x3 0x0 +#define MX8MN_IOMUXC_SAI3_TXC_UART2_DCE_TX 0x1DC 0x444 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SAI3_TXC_UART2_DTE_RX 0x1DC 0x444 0x4FC 0x4 0x3 +#define MX8MN_IOMUXC_SAI3_TXC_GPIO5_IO0 0x1DC 0x444 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SAI3_TXC_PDM_BIT_STREAM2 0x1DC 0x444 0x53C 0x6 0x9 +#define MX8MN_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0x1E0 0x448 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SAI3_TXD_GPT1_COMPARE3 0x1E0 0x448 0x000 0x1 0x0 +#define MX8MN_IOMUXC_SAI3_TXD_SAI5_RX_DATA3 0x1E0 0x448 0x4E0 0x2 0x1 +#define MX8MN_IOMUXC_SAI3_TXD_SPDIF1_EXT_CLK 0x1E0 0x448 0x568 0x4 0x2 +#define MX8MN_IOMUXC_SAI3_TXD_GPIO5_IO1 0x1E0 0x448 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SAI3_TXD_CCMSRCGPCMIX_BOOT_MODE5 0x1E0 0x448 0x000 0x6 0x0 +#define MX8MN_IOMUXC_SAI3_MCLK_SAI3_MCLK 0x1E4 0x44C 0x5C0 0x0 0x0 +#define MX8MN_IOMUXC_SAI3_MCLK_PWM4_OUT 0x1E4 0x44C 0x000 0x1 0x0 +#define MX8MN_IOMUXC_SAI3_MCLK_SAI5_MCLK 0x1E4 0x44C 0x594 0x2 0x3 +#define MX8MN_IOMUXC_SAI3_MCLK_SPDIF1_OUT 0x1E4 0x44C 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SAI3_MCLK_GPIO5_IO2 0x1E4 0x44C 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SAI3_MCLK_SPDIF1_IN 0x1E4 0x44C 0x5CC 0x6 0x4 +#define MX8MN_IOMUXC_SPDIF_TX_SPDIF1_OUT 0x1E8 0x450 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SPDIF_TX_PWM3_OUT 0x1E8 0x450 0x000 0x1 0x0 +#define MX8MN_IOMUXC_SPDIF_TX_GPIO5_IO3 0x1E8 0x450 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SPDIF_RX_SPDIF1_IN 0x1EC 0x454 0x5CC 0x0 0x0 +#define MX8MN_IOMUXC_SPDIF_RX_PWM2_OUT 0x1EC 0x454 0x000 0x1 0x0 +#define MX8MN_IOMUXC_SPDIF_RX_GPIO5_IO4 0x1EC 0x454 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SPDIF_EXT_CLK_SPDIF1_EXT_CLK 0x1F0 0x458 0x568 0x0 0x0 +#define MX8MN_IOMUXC_SPDIF_EXT_CLK_PWM1_OUT 0x1F0 0x458 0x000 0x1 0x0 +#define MX8MN_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5 0x1F0 0x458 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x1F4 0x45C 0x5D8 0x0 0x0 +#define MX8MN_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX 0x1F4 0x45C 0x504 0x1 0x0 +#define MX8MN_IOMUXC_ECSPI1_SCLK_UART3_DTE_TX 0x1F4 0x45C 0x000 0x1 0x0 +#define MX8MN_IOMUXC_ECSPI1_SCLK_I2C1_SCL 0x1F4 0x45C 0x55C 0x2 0x2 +#define MX8MN_IOMUXC_ECSPI1_SCLK_SAI5_RX_SYNC 0x1F4 0x45C 0x4DC 0x3 0x2 +#define MX8MN_IOMUXC_ECSPI1_SCLK_GPIO5_IO6 0x1F4 0x45C 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x1F8 0x460 0x5A8 0x0 0x0 +#define MX8MN_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX 0x1F8 0x460 0x000 0x1 0x0 +#define MX8MN_IOMUXC_ECSPI1_MOSI_UART3_DTE_RX 0x1F8 0x460 0x504 0x1 0x1 +#define MX8MN_IOMUXC_ECSPI1_MOSI_I2C1_SDA 0x1F8 0x460 0x56C 0x2 0x2 +#define MX8MN_IOMUXC_ECSPI1_MOSI_SAI5_RX_BCLK 0x1F8 0x460 0x4D0 0x3 0x3 +#define MX8MN_IOMUXC_ECSPI1_MOSI_GPIO5_IO7 0x1F8 0x460 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x1FC 0x464 0x5C4 0x0 0x0 +#define MX8MN_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B 0x1FC 0x464 0x000 0x1 0x0 +#define MX8MN_IOMUXC_ECSPI1_MISO_UART3_DTE_RTS_B 0x1FC 0x464 0x500 0x1 0x0 +#define MX8MN_IOMUXC_ECSPI1_MISO_I2C2_SCL 0x1FC 0x464 0x5D0 0x2 0x2 +#define MX8MN_IOMUXC_ECSPI1_MISO_SAI5_RX_DATA0 0x1FC 0x464 0x4D4 0x3 0x3 +#define MX8MN_IOMUXC_ECSPI1_MISO_GPIO5_IO8 0x1FC 0x464 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ECSPI1_SS0_ECSPI1_SS0 0x200 0x468 0x564 0x0 0x0 +#define MX8MN_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B 0x200 0x468 0x500 0x1 0x1 +#define MX8MN_IOMUXC_ECSPI1_SS0_UART3_DTE_CTS_B 0x200 0x468 0x000 0x1 0x0 +#define MX8MN_IOMUXC_ECSPI1_SS0_I2C2_SDA 0x200 0x468 0x560 0x2 0x2 +#define MX8MN_IOMUXC_ECSPI1_SS0_SAI5_RX_DATA1 0x200 0x468 0x4D8 0x3 0x2 +#define MX8MN_IOMUXC_ECSPI1_SS0_SAI5_TX_SYNC 0x200 0x468 0x4EC 0x4 0x3 +#define MX8MN_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x200 0x468 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x204 0x46C 0x580 0x0 0x0 +#define MX8MN_IOMUXC_ECSPI2_SCLK_UART4_DCE_RX 0x204 0x46C 0x50C 0x1 0x0 +#define MX8MN_IOMUXC_ECSPI2_SCLK_UART4_DTE_TX 0x204 0x46C 0x000 0x1 0x0 +#define MX8MN_IOMUXC_ECSPI2_SCLK_I2C3_SCL 0x204 0x46C 0x588 0x2 0x4 +#define MX8MN_IOMUXC_ECSPI2_SCLK_SAI5_RX_DATA2 0x204 0x46C 0x000 0x3 0x0 +#define MX8MN_IOMUXC_ECSPI2_SCLK_SAI5_TX_BCLK 0x204 0x46C 0x4E8 0x4 0x3 +#define MX8MN_IOMUXC_ECSPI2_SCLK_GPIO5_IO10 0x204 0x46C 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x208 0x470 0x590 0x0 0x0 +#define MX8MN_IOMUXC_ECSPI2_MOSI_UART4_DCE_TX 0x208 0x470 0x000 0x1 0x0 +#define MX8MN_IOMUXC_ECSPI2_MOSI_UART4_DTE_RX 0x208 0x470 0x50C 0x1 0x1 +#define MX8MN_IOMUXC_ECSPI2_MOSI_I2C3_SDA 0x208 0x470 0x5BC 0x2 0x4 +#define MX8MN_IOMUXC_ECSPI2_MOSI_SAI5_RX_DATA3 0x208 0x470 0x4E0 0x3 0x2 +#define MX8MN_IOMUXC_ECSPI2_MOSI_SAI5_TX_DATA0 0x208 0x470 0x000 0x4 0x0 +#define MX8MN_IOMUXC_ECSPI2_MOSI_GPIO5_IO11 0x208 0x470 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x20C 0x474 0x578 0x0 0x0 +#define MX8MN_IOMUXC_ECSPI2_MISO_UART4_DCE_CTS_B 0x20C 0x474 0x000 0x1 0x0 +#define MX8MN_IOMUXC_ECSPI2_MISO_UART4_DTE_RTS_B 0x20C 0x474 0x508 0x1 0x0 +#define MX8MN_IOMUXC_ECSPI2_MISO_I2C4_SCL 0x20C 0x474 0x5D4 0x2 0x3 +#define MX8MN_IOMUXC_ECSPI2_MISO_SAI5_MCLK 0x20C 0x474 0x594 0x3 0x4 +#define MX8MN_IOMUXC_ECSPI2_MISO_GPIO5_IO12 0x20C 0x474 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ECSPI2_SS0_ECSPI2_SS0 0x210 0x478 0x570 0x0 0x0 +#define MX8MN_IOMUXC_ECSPI2_SS0_UART4_DCE_RTS_B 0x210 0x478 0x508 0x1 0x1 +#define MX8MN_IOMUXC_ECSPI2_SS0_UART4_DTE_CTS_B 0x210 0x478 0x000 0x1 0x0 +#define MX8MN_IOMUXC_ECSPI2_SS0_I2C4_SDA 0x210 0x478 0x58C 0x2 0x5 +#define MX8MN_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x210 0x478 0x000 0x5 0x0 +#define MX8MN_IOMUXC_I2C1_SCL_I2C1_SCL 0x214 0x47C 0x55C 0x0 0x0 +#define MX8MN_IOMUXC_I2C1_SCL_ENET1_MDC 0x214 0x47C 0x000 0x1 0x0 +#define MX8MN_IOMUXC_I2C1_SCL_ECSPI1_SCLK 0x214 0x47C 0x5D8 0x3 0x1 +#define MX8MN_IOMUXC_I2C1_SCL_GPIO5_IO14 0x214 0x47C 0x000 0x5 0x0 +#define MX8MN_IOMUXC_I2C1_SDA_I2C1_SDA 0x218 0x480 0x56C 0x0 0x0 +#define MX8MN_IOMUXC_I2C1_SDA_ENET1_MDIO 0x218 0x480 0x4C0 0x1 0x2 +#define MX8MN_IOMUXC_I2C1_SDA_ECSPI1_MOSI 0x218 0x480 0x5A8 0x3 0x1 +#define MX8MN_IOMUXC_I2C1_SDA_GPIO5_IO15 0x218 0x480 0x000 0x5 0x0 +#define MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL 0x21C 0x484 0x5D0 0x0 0x0 +#define MX8MN_IOMUXC_I2C2_SCL_ENET1_1588_EVENT1_IN 0x21C 0x484 0x000 0x1 0x0 +#define MX8MN_IOMUXC_I2C2_SCL_USDHC3_CD_B 0x21C 0x484 0x598 0x2 0x1 +#define MX8MN_IOMUXC_I2C2_SCL_ECSPI1_MISO 0x21C 0x484 0x5C4 0x3 0x1 +#define MX8MN_IOMUXC_I2C2_SCL_GPIO5_IO16 0x21C 0x484 0x000 0x5 0x0 +#define MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA 0x220 0x488 0x560 0x0 0x0 +#define MX8MN_IOMUXC_I2C2_SDA_ENET1_1588_EVENT1_OUT 0x220 0x488 0x000 0x1 0x0 +#define MX8MN_IOMUXC_I2C2_SDA_USDHC3_WP 0x220 0x488 0x5B8 0x2 0x1 +#define MX8MN_IOMUXC_I2C2_SDA_ECSPI1_SS0 0x220 0x488 0x564 0x3 0x1 +#define MX8MN_IOMUXC_I2C2_SDA_GPIO5_IO17 0x220 0x488 0x000 0x5 0x0 +#define MX8MN_IOMUXC_I2C3_SCL_I2C3_SCL 0x224 0x48C 0x588 0x0 0x0 +#define MX8MN_IOMUXC_I2C3_SCL_PWM4_OUT 0x224 0x48C 0x000 0x1 0x0 +#define MX8MN_IOMUXC_I2C3_SCL_GPT2_CLK 0x224 0x48C 0x000 0x2 0x0 +#define MX8MN_IOMUXC_I2C3_SCL_ECSPI2_SCLK 0x224 0x48C 0x580 0x3 0x2 +#define MX8MN_IOMUXC_I2C3_SCL_GPIO5_IO18 0x224 0x48C 0x000 0x5 0x0 +#define MX8MN_IOMUXC_I2C3_SDA_I2C3_SDA 0x228 0x490 0x5BC 0x0 0x0 +#define MX8MN_IOMUXC_I2C3_SDA_PWM3_OUT 0x228 0x490 0x000 0x1 0x0 +#define MX8MN_IOMUXC_I2C3_SDA_GPT3_CLK 0x228 0x490 0x000 0x2 0x0 +#define MX8MN_IOMUXC_I2C3_SDA_ECSPI2_MOSI 0x228 0x490 0x590 0x3 0x2 +#define MX8MN_IOMUXC_I2C3_SDA_GPIO5_IO19 0x228 0x490 0x000 0x5 0x0 +#define MX8MN_IOMUXC_I2C4_SCL_I2C4_SCL 0x22C 0x494 0x5D4 0x0 0x0 +#define MX8MN_IOMUXC_I2C4_SCL_PWM2_OUT 0x22C 0x494 0x000 0x1 0x0 +#define MX8MN_IOMUXC_I2C4_SCL_ECSPI2_MISO 0x22C 0x494 0x578 0x3 0x2 +#define MX8MN_IOMUXC_I2C4_SCL_GPIO5_IO20 0x22C 0x494 0x000 0x5 0x0 +#define MX8MN_IOMUXC_I2C4_SDA_I2C4_SDA 0x230 0x498 0x58C 0x0 0x0 +#define MX8MN_IOMUXC_I2C4_SDA_PWM1_OUT 0x230 0x498 0x000 0x1 0x0 +#define MX8MN_IOMUXC_I2C4_SDA_ECSPI2_SS0 0x230 0x498 0x570 0x3 0x1 +#define MX8MN_IOMUXC_I2C4_SDA_GPIO5_IO21 0x230 0x498 0x000 0x5 0x0 +#define MX8MN_IOMUXC_UART1_RXD_UART1_DCE_RX 0x234 0x49C 0x4F4 0x0 0x0 +#define MX8MN_IOMUXC_UART1_RXD_UART1_DTE_TX 0x234 0x49C 0x000 0x0 0x0 +#define MX8MN_IOMUXC_UART1_RXD_ECSPI3_SCLK 0x234 0x49C 0x000 0x1 0x0 +#define MX8MN_IOMUXC_UART1_RXD_GPIO5_IO22 0x234 0x49C 0x000 0x5 0x0 +#define MX8MN_IOMUXC_UART1_TXD_UART1_DCE_TX 0x238 0x4A0 0x000 0x0 0x0 +#define MX8MN_IOMUXC_UART1_TXD_UART1_DTE_RX 0x238 0x4A0 0x4F4 0x0 0x1 +#define MX8MN_IOMUXC_UART1_TXD_ECSPI3_MOSI 0x238 0x4A0 0x000 0x1 0x0 +#define MX8MN_IOMUXC_UART1_TXD_GPIO5_IO23 0x238 0x4A0 0x000 0x5 0x0 +#define MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX 0x23C 0x4A4 0x4FC 0x0 0x0 +#define MX8MN_IOMUXC_UART2_RXD_UART2_DTE_TX 0x23C 0x4A4 0x000 0x0 0x0 +#define MX8MN_IOMUXC_UART2_RXD_ECSPI3_MISO 0x23C 0x4A4 0x000 0x1 0x0 +#define MX8MN_IOMUXC_UART2_RXD_GPT1_COMPARE3 0x23C 0x4A4 0x000 0x3 0x0 +#define MX8MN_IOMUXC_UART2_RXD_GPIO5_IO24 0x23C 0x4A4 0x000 0x5 0x0 +#define MX8MN_IOMUXC_UART2_TXD_UART2_DCE_TX 0x240 0x4A8 0x000 0x0 0x0 +#define MX8MN_IOMUXC_UART2_TXD_UART2_DTE_RX 0x240 0x4A8 0x4FC 0x0 0x1 +#define MX8MN_IOMUXC_UART2_TXD_ECSPI3_SS0 0x240 0x4A8 0x000 0x1 0x0 +#define MX8MN_IOMUXC_UART2_TXD_GPT1_COMPARE2 0x240 0x4A8 0x000 0x3 0x0 +#define MX8MN_IOMUXC_UART2_TXD_GPIO5_IO25 0x240 0x4A8 0x000 0x5 0x0 +#define MX8MN_IOMUXC_UART3_RXD_UART3_DCE_RX 0x244 0x4AC 0x504 0x0 0x2 +#define MX8MN_IOMUXC_UART3_RXD_UART3_DTE_TX 0x244 0x4AC 0x000 0x0 0x0 +#define MX8MN_IOMUXC_UART3_RXD_UART1_DCE_CTS_B 0x244 0x4AC 0x000 0x1 0x0 +#define MX8MN_IOMUXC_UART3_RXD_UART1_DTE_RTS_B 0x244 0x4AC 0x4F0 0x1 0x0 +#define MX8MN_IOMUXC_UART3_RXD_USDHC3_RESET_B 0x244 0x4AC 0x000 0x2 0x0 +#define MX8MN_IOMUXC_UART3_RXD_GPT1_CAPTURE2 0x244 0x4AC 0x5EC 0x3 0x1 +#define MX8MN_IOMUXC_UART3_RXD_GPIO5_IO26 0x244 0x4AC 0x000 0x5 0x0 +#define MX8MN_IOMUXC_UART3_TXD_UART3_DCE_TX 0x248 0x4B0 0x000 0x0 0x0 +#define MX8MN_IOMUXC_UART3_TXD_UART3_DTE_RX 0x248 0x4B0 0x504 0x0 0x3 +#define MX8MN_IOMUXC_UART3_TXD_UART1_DCE_RTS_B 0x248 0x4B0 0x4F0 0x1 0x1 +#define MX8MN_IOMUXC_UART3_TXD_UART1_DTE_CTS_B 0x248 0x4B0 0x000 0x1 0x0 +#define MX8MN_IOMUXC_UART3_TXD_USDHC3_VSELECT 0x248 0x4B0 0x000 0x2 0x0 +#define MX8MN_IOMUXC_UART3_TXD_GPT1_CLK 0x248 0x4B0 0x5E8 0x3 0x1 +#define MX8MN_IOMUXC_UART3_TXD_GPIO5_IO27 0x248 0x4B0 0x000 0x5 0x0 +#define MX8MN_IOMUXC_UART4_RXD_UART4_DCE_RX 0x24C 0x4B4 0x50C 0x0 0x2 +#define MX8MN_IOMUXC_UART4_RXD_UART4_DTE_TX 0x24C 0x4B4 0x000 0x0 0x0 +#define MX8MN_IOMUXC_UART4_RXD_UART2_DCE_CTS_B 0x24C 0x4B4 0x000 0x1 0x0 +#define MX8MN_IOMUXC_UART4_RXD_UART2_DTE_RTS_B 0x24C 0x4B4 0x4F8 0x1 0x0 +#define MX8MN_IOMUXC_UART4_RXD_GPT1_COMPARE1 0x24C 0x4B4 0x000 0x3 0x0 +#define MX8MN_IOMUXC_UART4_RXD_GPIO5_IO28 0x24C 0x4B4 0x000 0x5 0x0 +#define MX8MN_IOMUXC_UART4_TXD_UART4_DCE_TX 0x250 0x4B8 0x000 0x0 0x0 +#define MX8MN_IOMUXC_UART4_TXD_UART4_DTE_RX 0x250 0x4B8 0x50C 0x0 0x3 +#define MX8MN_IOMUXC_UART4_TXD_UART2_DCE_RTS_B 0x250 0x4B8 0x4F8 0x1 0x1 +#define MX8MN_IOMUXC_UART4_TXD_UART2_DTE_CTS_B 0x250 0x4B8 0x000 0x1 0x0 +#define MX8MN_IOMUXC_UART4_TXD_GPT1_CAPTURE1 0x250 0x4B8 0x5F0 0x3 0x1 +#define MX8MN_IOMUXC_UART4_TXD_GPIO5_IO29 0x250 0x4B8 0x000 0x5 0x0 + +#endif /* __DTS_IMX8MN_PINFUNC_H */ diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi new file mode 100644 index 000000000000..785f4c420fa4 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi @@ -0,0 +1,758 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2019 NXP + */ + +#include <dt-bindings/clock/imx8mn-clock.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +#include "imx8mn-pinfunc.h" + +/ { + compatible = "fsl,imx8mn"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + ethernet0 = &fec1; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; + i2c3 = &i2c4; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + mmc2 = &usdhc3; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + spi0 = &ecspi1; + spi1 = &ecspi2; + spi2 = &ecspi3; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + A53_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0>; + clock-latency = <61036>; + clocks = <&clk IMX8MN_CLK_ARM>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + operating-points-v2 = <&a53_opp_table>; + nvmem-cells = <&cpu_speed_grade>; + nvmem-cell-names = "speed_grade"; + }; + + A53_1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1>; + clock-latency = <61036>; + clocks = <&clk IMX8MN_CLK_ARM>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + operating-points-v2 = <&a53_opp_table>; + }; + + A53_2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x2>; + clock-latency = <61036>; + clocks = <&clk IMX8MN_CLK_ARM>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + operating-points-v2 = <&a53_opp_table>; + }; + + A53_3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x3>; + clock-latency = <61036>; + clocks = <&clk IMX8MN_CLK_ARM>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + operating-points-v2 = <&a53_opp_table>; + }; + + A53_L2: l2-cache0 { + compatible = "cache"; + }; + }; + + a53_opp_table: opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <850000>; + opp-supported-hw = <0xb00>, <0x7>; + clock-latency-ns = <150000>; + opp-suspend; + }; + + opp-1400000000 { + opp-hz = /bits/ 64 <1400000000>; + opp-microvolt = <950000>; + opp-supported-hw = <0x300>, <0x7>; + clock-latency-ns = <150000>; + opp-suspend; + }; + + opp-1500000000 { + opp-hz = /bits/ 64 <1500000000>; + opp-microvolt = <1000000>; + opp-supported-hw = <0x100>, <0x3>; + clock-latency-ns = <150000>; + opp-suspend; + }; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0 0x80000000>; + }; + + osc_32k: clock-osc-32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "osc_32k"; + }; + + osc_24m: clock-osc-24m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "osc_24m"; + }; + + clk_ext1: clock-ext1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <133000000>; + clock-output-names = "clk_ext1"; + }; + + clk_ext2: clock-ext2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <133000000>; + clock-output-names = "clk_ext2"; + }; + + clk_ext3: clock-ext3 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <133000000>; + clock-output-names = "clk_ext3"; + }; + + clk_ext4: clock-ext4 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency= <133000000>; + clock-output-names = "clk_ext4"; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; + clock-frequency = <8000000>; + arm,no-tick-in-suspend; + }; + + soc@0 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x0 0x3e000000>; + + aips1: bus@30000000 { + compatible = "fsl,aips-bus", "simple-bus"; + reg = <0x30000000 0x400000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio1: gpio@30200000 { + compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio"; + reg = <0x30200000 0x10000>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_GPIO1_ROOT>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 10 30>; + }; + + gpio2: gpio@30210000 { + compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio"; + reg = <0x30210000 0x10000>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_GPIO2_ROOT>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 40 21>; + }; + + gpio3: gpio@30220000 { + compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio"; + reg = <0x30220000 0x10000>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_GPIO3_ROOT>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 61 26>; + }; + + gpio4: gpio@30230000 { + compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio"; + reg = <0x30230000 0x10000>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_GPIO4_ROOT>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 21 108 11>; + }; + + gpio5: gpio@30240000 { + compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio"; + reg = <0x30240000 0x10000>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_GPIO5_ROOT>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 119 30>; + }; + + wdog1: watchdog@30280000 { + compatible = "fsl,imx8mn-wdt", "fsl,imx21-wdt"; + reg = <0x30280000 0x10000>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_WDOG1_ROOT>; + status = "disabled"; + }; + + wdog2: watchdog@30290000 { + compatible = "fsl,imx8mn-wdt", "fsl,imx21-wdt"; + reg = <0x30290000 0x10000>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_WDOG2_ROOT>; + status = "disabled"; + }; + + wdog3: watchdog@302a0000 { + compatible = "fsl,imx8mn-wdt", "fsl,imx21-wdt"; + reg = <0x302a0000 0x10000>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_WDOG3_ROOT>; + status = "disabled"; + }; + + sdma3: dma-controller@302b0000 { + compatible = "fsl,imx8mn-sdma", "fsl,imx7d-sdma"; + reg = <0x302b0000 0x10000>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_SDMA3_ROOT>, + <&clk IMX8MN_CLK_SDMA3_ROOT>; + clock-names = "ipg", "ahb"; + #dma-cells = <3>; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; + }; + + sdma2: dma-controller@302c0000 { + compatible = "fsl,imx8mn-sdma", "fsl,imx7d-sdma"; + reg = <0x302c0000 0x10000>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_SDMA2_ROOT>, + <&clk IMX8MN_CLK_SDMA2_ROOT>; + clock-names = "ipg", "ahb"; + #dma-cells = <3>; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; + }; + + iomuxc: pinctrl@30330000 { + compatible = "fsl,imx8mn-iomuxc"; + reg = <0x30330000 0x10000>; + }; + + gpr: iomuxc-gpr@30340000 { + compatible = "fsl,imx8mn-iomuxc-gpr", "syscon"; + reg = <0x30340000 0x10000>; + }; + + ocotp: ocotp-ctrl@30350000 { + compatible = "fsl,imx8mn-ocotp", "fsl,imx7d-ocotp", "syscon"; + reg = <0x30350000 0x10000>; + clocks = <&clk IMX8MN_CLK_OCOTP_ROOT>; + #address-cells = <1>; + #size-cells = <1>; + + cpu_speed_grade: speed-grade@10 { + reg = <0x10 4>; + }; + }; + + anatop: anatop@30360000 { + compatible = "fsl,imx8mn-anatop", "fsl,imx8mm-anatop", + "syscon", "simple-bus"; + reg = <0x30360000 0x10000>; + }; + + snvs: snvs@30370000 { + compatible = "fsl,sec-v4.0-mon","syscon", "simple-mfd"; + reg = <0x30370000 0x10000>; + + snvs_rtc: snvs-rtc-lp { + compatible = "fsl,sec-v4.0-mon-rtc-lp"; + regmap = <&snvs>; + offset = <0x34>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "snvs-rtc"; + }; + + snvs_pwrkey: snvs-powerkey { + compatible = "fsl,sec-v4.0-pwrkey"; + regmap = <&snvs>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + linux,keycode = <KEY_POWER>; + wakeup-source; + status = "disabled"; + }; + }; + + clk: clock-controller@30380000 { + compatible = "fsl,imx8mn-ccm"; + reg = <0x30380000 0x10000>; + #clock-cells = <1>; + clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>, + <&clk_ext3>, <&clk_ext4>; + clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2", + "clk_ext3", "clk_ext4"; + }; + + src: reset-controller@30390000 { + compatible = "fsl,imx8mn-src", "syscon"; + reg = <0x30390000 0x10000>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + #reset-cells = <1>; + }; + }; + + aips2: bus@30400000 { + compatible = "fsl,aips-bus", "simple-bus"; + reg = <0x30400000 0x400000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pwm1: pwm@30660000 { + compatible = "fsl,imx8mn-pwm", "fsl,imx27-pwm"; + reg = <0x30660000 0x10000>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_PWM1_ROOT>, + <&clk IMX8MN_CLK_PWM1_ROOT>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm2: pwm@30670000 { + compatible = "fsl,imx8mn-pwm", "fsl,imx27-pwm"; + reg = <0x30670000 0x10000>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_PWM2_ROOT>, + <&clk IMX8MN_CLK_PWM2_ROOT>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm3: pwm@30680000 { + compatible = "fsl,imx8mn-pwm", "fsl,imx27-pwm"; + reg = <0x30680000 0x10000>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_PWM3_ROOT>, + <&clk IMX8MN_CLK_PWM3_ROOT>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm4: pwm@30690000 { + compatible = "fsl,imx8mn-pwm", "fsl,imx27-pwm"; + reg = <0x30690000 0x10000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_PWM4_ROOT>, + <&clk IMX8MN_CLK_PWM4_ROOT>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + }; + + aips3: bus@30800000 { + compatible = "fsl,aips-bus", "simple-bus"; + reg = <0x30800000 0x400000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + ecspi1: spi@30820000 { + compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30820000 0x10000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_ECSPI1_ROOT>, + <&clk IMX8MN_CLK_ECSPI1_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + ecspi2: spi@30830000 { + compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30830000 0x10000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_ECSPI2_ROOT>, + <&clk IMX8MN_CLK_ECSPI2_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + ecspi3: spi@30840000 { + compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30840000 0x10000>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_ECSPI3_ROOT>, + <&clk IMX8MN_CLK_ECSPI3_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart1: serial@30860000 { + compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart"; + reg = <0x30860000 0x10000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_UART1_ROOT>, + <&clk IMX8MN_CLK_UART1_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart3: serial@30880000 { + compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart"; + reg = <0x30880000 0x10000>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_UART3_ROOT>, + <&clk IMX8MN_CLK_UART3_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart2: serial@30890000 { + compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart"; + reg = <0x30890000 0x10000>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_UART2_ROOT>, + <&clk IMX8MN_CLK_UART2_ROOT>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + i2c1: i2c@30a20000 { + compatible = "fsl,imx8mn-i2c", "fsl,imx21-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30a20000 0x10000>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_I2C1_ROOT>; + status = "disabled"; + }; + + i2c2: i2c@30a30000 { + compatible = "fsl,imx8mn-i2c", "fsl,imx21-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30a30000 0x10000>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_I2C2_ROOT>; + status = "disabled"; + }; + + i2c3: i2c@30a40000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8mn-i2c", "fsl,imx21-i2c"; + reg = <0x30a40000 0x10000>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_I2C3_ROOT>; + status = "disabled"; + }; + + i2c4: i2c@30a50000 { + compatible = "fsl,imx8mn-i2c", "fsl,imx21-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30a50000 0x10000>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_I2C4_ROOT>; + status = "disabled"; + }; + + uart4: serial@30a60000 { + compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart"; + reg = <0x30a60000 0x10000>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_UART4_ROOT>, + <&clk IMX8MN_CLK_UART4_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 28 4 0>, <&sdma1 29 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + usdhc1: mmc@30b40000 { + compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc"; + reg = <0x30b40000 0x10000>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_DUMMY>, + <&clk IMX8MN_CLK_NAND_USDHC_BUS>, + <&clk IMX8MN_CLK_USDHC1_ROOT>; + clock-names = "ipg", "ahb", "per"; + assigned-clocks = <&clk IMX8MN_CLK_USDHC1>; + assigned-clock-rates = <400000000>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + bus-width = <4>; + status = "disabled"; + }; + + usdhc2: mmc@30b50000 { + compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc"; + reg = <0x30b50000 0x10000>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_DUMMY>, + <&clk IMX8MN_CLK_NAND_USDHC_BUS>, + <&clk IMX8MN_CLK_USDHC2_ROOT>; + clock-names = "ipg", "ahb", "per"; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + bus-width = <4>; + status = "disabled"; + }; + + usdhc3: mmc@30b60000 { + compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc"; + reg = <0x30b60000 0x10000>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_DUMMY>, + <&clk IMX8MN_CLK_NAND_USDHC_BUS>, + <&clk IMX8MN_CLK_USDHC3_ROOT>; + clock-names = "ipg", "ahb", "per"; + assigned-clocks = <&clk IMX8MN_CLK_USDHC3_ROOT>; + assigned-clock-rates = <400000000>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + bus-width = <4>; + status = "disabled"; + }; + + sdma1: dma-controller@30bd0000 { + compatible = "fsl,imx8mn-sdma", "fsl,imx7d-sdma"; + reg = <0x30bd0000 0x10000>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_SDMA1_ROOT>, + <&clk IMX8MN_CLK_SDMA1_ROOT>; + clock-names = "ipg", "ahb"; + #dma-cells = <3>; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; + }; + + fec1: ethernet@30be0000 { + compatible = "fsl,imx8mn-fec", "fsl,imx6sx-fec"; + reg = <0x30be0000 0x10000>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_ENET1_ROOT>, + <&clk IMX8MN_CLK_ENET1_ROOT>, + <&clk IMX8MN_CLK_ENET_TIMER>, + <&clk IMX8MN_CLK_ENET_REF>, + <&clk IMX8MN_CLK_ENET_PHY_REF>; + clock-names = "ipg", "ahb", "ptp", + "enet_clk_ref", "enet_out"; + assigned-clocks = <&clk IMX8MN_CLK_ENET_AXI>, + <&clk IMX8MN_CLK_ENET_TIMER>, + <&clk IMX8MN_CLK_ENET_REF>, + <&clk IMX8MN_CLK_ENET_TIMER>; + assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_266M>, + <&clk IMX8MN_SYS_PLL2_100M>, + <&clk IMX8MN_SYS_PLL2_125M>; + assigned-clock-rates = <0>, <0>, <125000000>, <100000000>; + fsl,num-tx-queues = <3>; + fsl,num-rx-queues = <3>; + status = "disabled"; + }; + + }; + + aips4: bus@32c00000 { + compatible = "fsl,aips-bus", "simple-bus"; + reg = <0x32c00000 0x400000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + usbotg1: usb@32e40000 { + compatible = "fsl,imx8mn-usb", "fsl,imx7d-usb"; + reg = <0x32e40000 0x200>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_USB1_CTRL_ROOT>; + clock-names = "usb1_ctrl_root_clk"; + assigned-clocks = <&clk IMX8MN_CLK_USB_BUS>, + <&clk IMX8MN_CLK_USB_CORE_REF>; + assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_500M>, + <&clk IMX8MN_SYS_PLL1_100M>; + fsl,usbphy = <&usbphynop1>; + fsl,usbmisc = <&usbmisc1 0>; + status = "disabled"; + }; + + usbmisc1: usbmisc@32e40200 { + compatible = "fsl,imx8mn-usbmisc", "fsl,imx7d-usbmisc"; + #index-cells = <1>; + reg = <0x32e40200 0x200>; + }; + + usbotg2: usb@32e50000 { + compatible = "fsl,imx8mn-usb", "fsl,imx7d-usb"; + reg = <0x32e50000 0x200>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_USB1_CTRL_ROOT>; + clock-names = "usb1_ctrl_root_clk"; + assigned-clocks = <&clk IMX8MN_CLK_USB_BUS>, + <&clk IMX8MN_CLK_USB_CORE_REF>; + assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_500M>, + <&clk IMX8MN_SYS_PLL1_100M>; + fsl,usbphy = <&usbphynop2>; + fsl,usbmisc = <&usbmisc2 0>; + status = "disabled"; + }; + + usbmisc2: usbmisc@32e50200 { + compatible = "fsl,imx8mn-usbmisc", "fsl,imx7d-usbmisc"; + #index-cells = <1>; + reg = <0x32e50200 0x200>; + }; + + }; + + dma_apbh: dma-controller@33000000 { + compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh"; + reg = <0x33000000 0x2000>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3"; + #dma-cells = <1>; + dma-channels = <4>; + clocks = <&clk IMX8MN_CLK_NAND_USDHC_BUS_RAWNAND_CLK>; + }; + + gpmi: nand-controller@33002000 { + compatible = "fsl,imx8mn-gpmi-nand", "fsl,imx7d-gpmi-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x33002000 0x2000>, <0x33004000 0x4000>; + reg-names = "gpmi-nand", "bch"; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "bch"; + clocks = <&clk IMX8MN_CLK_NAND_ROOT>, + <&clk IMX8MN_CLK_NAND_USDHC_BUS_RAWNAND_CLK>; + clock-names = "gpmi_io", "gpmi_bch_apb"; + dmas = <&dma_apbh 0>; + dma-names = "rx-tx"; + status = "disabled"; + }; + + gic: interrupt-controller@38800000 { + compatible = "arm,gic-v3"; + reg = <0x38800000 0x10000>, + <0x38880000 0xc0000>; + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + usbphynop1: usbphynop1 { + compatible = "usb-nop-xceiv"; + clocks = <&clk IMX8MN_CLK_USB_PHY_REF>; + assigned-clocks = <&clk IMX8MN_CLK_USB_PHY_REF>; + assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_100M>; + clock-names = "main_clk"; + }; + + usbphynop2: usbphynop2 { + compatible = "usb-nop-xceiv"; + clocks = <&clk IMX8MN_CLK_USB_PHY_REF>; + assigned-clocks = <&clk IMX8MN_CLK_USB_PHY_REF>; + assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_100M>; + clock-names = "main_clk"; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts index b2038be8bbd7..05958124f173 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts @@ -118,9 +118,9 @@ &sai2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sai2>; - assigned-clocks = <&clk IMX8MQ_CLK_SAI2>; - assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>; - assigned-clock-rates = <24576000>; + assigned-clocks = <&clk IMX8MQ_AUDIO_PLL1_BYPASS>, <&clk IMX8MQ_CLK_SAI2>; + assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1>, <&clk IMX8MQ_AUDIO_PLL1_OUT>; + assigned-clock-rates = <0>, <24576000>; status = "okay"; }; @@ -242,6 +242,10 @@ power-supply = <&sw1a_reg>; }; +&snvs_pwrkey { + status = "okay"; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-hummingboard-pulse.dts b/arch/arm64/boot/dts/freescale/imx8mq-hummingboard-pulse.dts new file mode 100644 index 000000000000..f52e872ac96f --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mq-hummingboard-pulse.dts @@ -0,0 +1,256 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2018 Jon Nettleton <jon@solid-run.com> + */ + +/dts-v1/; + +#include "dt-bindings/usb/pd.h" +#include "imx8mq-sr-som.dtsi" + +/ { + model = "SolidRun i.MX8MQ HummingBoard Pulse"; + compatible = "solidrun,hummingboard-pulse", "fsl,imx8mq"; + + chosen { + stdout-path = &uart1; + }; + + reg_usdhc2_vmmc: regulator-usdhc2-vmmc { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2_vmmc>; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 13 GPIO_ACTIVE_LOW>; + }; + + reg_v_5v0: regulator-v-5v0 { + compatible = "regulator-fixed"; + regulator-name = "v_5v0"; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-always-on; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clock-frequency = <100000>; + status = "okay"; + + typec_ptn5100: usb-typec@50 { + compatible = "nxp,ptn5110"; + reg = <0x50>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_typec>; + interrupt-parent = <&gpio1>; + interrupts = <6 IRQ_TYPE_LEVEL_LOW>; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + data-role = "dual"; + power-role = "dual"; + try-power-role = "sink"; + source-pdos = <PDO_FIXED(5000, 2000, + PDO_FIXED_USB_COMM | + PDO_FIXED_SUSPEND | + PDO_FIXED_EXTPOWER)>; + sink-pdos = <PDO_FIXED(5000, 2000, + PDO_FIXED_USB_COMM | + PDO_FIXED_SUSPEND | + PDO_FIXED_EXTPOWER) + PDO_FIXED(9000, 2000, + PDO_FIXED_USB_COMM | + PDO_FIXED_SUSPEND | + PDO_FIXED_EXTPOWER)>; + op-sink-microwatt = <9000000>; + + port { + typec1_dr_sw: endpoint { + remote-endpoint = <&usb1_drd_sw>; + }; + }; + }; + }; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + clock-frequency = <100000>; + status = "okay"; + + rtc@69 { + compatible = "abracon,ab1805"; + reg = <0x69>; + abracon,tc-diode = "schottky"; + abracon,tc-resistor = <3>; + }; +}; + +&uart2 { /* J35 header */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + assigned-clocks = <&clk IMX8MQ_CLK_UART2>; + assigned-clock-parents = <&clk IMX8MQ_CLK_25M>; + status = "okay"; +}; + +&uart3 { /* Mikrobus */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + assigned-clocks = <&clk IMX8MQ_CLK_UART3>; + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>; + uart-has-rtscts; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_usdhc2_vmmc>; + status = "okay"; +}; + +&usb_dwc3_0 { + dr_mode = "otg"; + status = "okay"; + + port { + usb1_drd_sw: endpoint { + remote-endpoint = <&typec1_dr_sw>; + }; + }; +}; + +&usb_dwc3_1 { + dr_mode = "host"; + status = "okay"; +}; + +&usb3_phy0 { + status = "okay"; +}; + +&usb3_phy1 { + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hoggrp { + fsl,pins = < + /* MikroBus Analog */ + MX8MQ_IOMUXC_NAND_DATA05_GPIO3_IO11 0x41 + /* MikroBus Reset */ + MX8MQ_IOMUXC_SAI2_RXD0_GPIO4_IO23 0x41 + /* + * The following 2 pins need to be commented out and + * reconfigured to enable RTS/CTS on UART3 + */ + /* MikroBus PWM */ + MX8MQ_IOMUXC_ECSPI1_MISO_GPIO5_IO8 0x41 + /* MikroBus INT */ + MX8MQ_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x41 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL 0x4000007f + MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA 0x4000007f + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL 0x4000007f + MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA 0x4000007f + >; + }; + + pinctrl_typec: typecgrp { + fsl,pins = < + MX8MQ_IOMUXC_NAND_RE_B_GPIO3_IO15 0x16 + MX8MQ_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x17059 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX 0x49 + MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX 0x49 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX 0x49 + MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX 0x49 + /* + * These pins are by default GPIO on the Mikro Bus + * Header. To use RTS/CTS on UART3 comment them out + * of the hoggrp and enable them here + */ + /* MX8MQ_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B 0x49 */ + /* MX8MQ_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B 0x49 */ + >; + }; + + pinctrl_usdhc2_gpio: usdhc2grpgpio { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x41 + >; + }; + + pinctrl_usdhc2_vmmc: usdhc2vmmcgpio { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x41 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x83 + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc3 + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc3 + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc3 + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc3 + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc3 + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x8d + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xcd + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xcd + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xcd + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xcd + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xcd + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x9f + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xdf + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xdf + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xdf + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xdf + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xdf + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts new file mode 100644 index 000000000000..683a11035643 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts @@ -0,0 +1,813 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018-2019 Purism SPC + */ + +/dts-v1/; + +#include "dt-bindings/input/input.h" +#include "dt-bindings/pwm/pwm.h" +#include "dt-bindings/usb/pd.h" +#include "imx8mq.dtsi" + +/ { + model = "Purism Librem 5 devkit"; + compatible = "purism,librem5-devkit", "fsl,imx8mq"; + + backlight_dsi: backlight-dsi { + compatible = "pwm-backlight"; + /* 200 Hz for the PAM2841 */ + pwms = <&pwm1 0 5000000>; + brightness-levels = <0 100>; + num-interpolated-steps = <100>; + /* Default brightness level (index into the array defined by */ + /* the "brightness-levels" property) */ + default-brightness-level = <0>; + power-supply = <®_22v4_p>; + }; + + chosen { + stdout-path = &uart1; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + btn1 { + label = "VOL_UP"; + gpios = <&gpio4 21 GPIO_ACTIVE_LOW>; + wakeup-source; + linux,code = <KEY_VOLUMEUP>; + }; + + btn2 { + label = "VOL_DOWN"; + gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; + wakeup-source; + linux,code = <KEY_VOLUMEDOWN>; + }; + + hp-det { + label = "HP_DET"; + gpios = <&gpio3 20 GPIO_ACTIVE_LOW>; + wakeup-source; + linux,code = <KEY_HP>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led1 { + label = "LED 1"; + gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + pmic_osc: clock-pmic { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "pmic_osc"; + }; + + reg_1v8_p: regulator-1v8-p { + compatible = "regulator-fixed"; + regulator-name = "1v8_p"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <®_pwr_en>; + }; + + reg_2v8_p: regulator-2v8-p { + compatible = "regulator-fixed"; + regulator-name = "2v8_p"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + vin-supply = <®_pwr_en>; + }; + + reg_3v3_p: regulator-3v3-p { + compatible = "regulator-fixed"; + regulator-name = "3v3_p"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <®_pwr_en>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + reg_5v_p: regulator-5v-p { + compatible = "regulator-fixed"; + regulator-name = "5v_p"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <®_pwr_en>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + reg_22v4_p: regulator-22v4-p { + compatible = "regulator-fixed"; + regulator-name = "22v4_P"; + regulator-min-microvolt = <22400000>; + regulator-max-microvolt = <22400000>; + vin-supply = <®_pwr_en>; + }; + + reg_pwr_en: regulator-pwr-en { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwr_en>; + regulator-name = "PWR_EN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_usdhc2_vmmc: regulator-usdhc2-vmmc { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2_pwr>; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + vibrator { + compatible = "gpio-vibrator"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_haptic>; + enable-gpios = <&gpio5 4 GPIO_ACTIVE_LOW>; + vcc-supply = <®_3v3_p>; + }; + + wifi_pwr_en: regulator-wifi-en { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_pwr_en>; + regulator-name = "WIFI_EN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; +}; + +&clk { + assigned-clocks = <&clk IMX8MQ_AUDIO_PLL1>, <&clk IMX8MQ_AUDIO_PLL2>; + assigned-clock-rates = <786432000>, <722534400>; +}; + +&dphy { + status = "okay"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + fsl,magic-packet; + phy-supply = <®_3v3_p>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic: pmic@4b { + compatible = "rohm,bd71837"; + reg = <0x4b>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + clocks = <&pmic_osc>; + clock-names = "osc"; + clock-output-names = "pmic_clk"; + interrupt-parent = <&gpio1>; + interrupts = <3 GPIO_ACTIVE_LOW>; + interrupt-names = "irq"; + rohm,reset-snvs-powered; + + regulators { + buck1_reg: BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <900000>; + rohm,dvs-idle-voltage = <850000>; + rohm,dvs-suspend-voltage = <800000>; + }; + + buck2_reg: BUCK2 { + regulator-name = "buck2"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <1000000>; + rohm,dvs-idle-voltage = <900000>; + }; + + buck3_reg: BUCK3 { + regulator-name = "buck3"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + rohm,dvs-run-voltage = <1000000>; + }; + + buck4_reg: BUCK4 { + regulator-name = "buck4"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + rohm,dvs-run-voltage = <1000000>; + }; + + buck5_reg: BUCK5 { + regulator-name = "buck5"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + }; + + buck6_reg: BUCK6 { + regulator-name = "buck6"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + buck7_reg: BUCK7 { + regulator-name = "buck7"; + regulator-min-microvolt = <1605000>; + regulator-max-microvolt = <1995000>; + regulator-boot-on; + }; + + buck8_reg: BUCK8 { + regulator-name = "buck8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-boot-on; + }; + + ldo1_reg: LDO1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + /* leave on for snvs power button */ + regulator-always-on; + }; + + ldo2_reg: LDO2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + /* leave on for snvs power button */ + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + ldo4_reg: LDO4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + ldo5_reg: LDO5 { + regulator-name = "ldo5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + ldo6_reg: LDO6 { + regulator-name = "ldo6"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + ldo7_reg: LDO7 { + regulator-name = "ldo7"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + }; + }; + + typec_ptn5100: usb_typec@52 { + compatible = "nxp,ptn5110"; + reg = <0x52>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_typec>; + interrupt-parent = <&gpio3>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + data-role = "dual"; + power-role = "dual"; + try-power-role = "sink"; + source-pdos = <PDO_FIXED(5000, 2000, + PDO_FIXED_USB_COMM | + PDO_FIXED_DUAL_ROLE | + PDO_FIXED_DATA_SWAP )>; + sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM | + PDO_FIXED_DUAL_ROLE | + PDO_FIXED_DATA_SWAP ) + PDO_VAR(5000, 3000, 3000)>; + op-sink-microwatt = <10000000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_con_hs: endpoint { + remote-endpoint = <&typec_hs>; + }; + }; + + port@1 { + reg = <1>; + + usb_con_ss: endpoint { + remote-endpoint = <&typec_ss>; + }; + }; + }; + }; + }; + + rtc@68 { + compatible = "microcrystal,rv4162"; + reg = <0x68>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc>; + interrupt-parent = <&gpio4>; + interrupts = <29 IRQ_TYPE_LEVEL_LOW>; + }; + + charger@6b { /* bq25896 */ + compatible = "ti,bq25890"; + reg = <0x6b>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_charger>; + interrupt-parent = <&gpio3>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + ti,battery-regulation-voltage = <4192000>; /* 4.192V */ + ti,charge-current = <1600000>; /* 1.6A */ + ti,termination-current = <66000>; /* 66mA */ + ti,precharge-current = <130000>; /* 130mA */ + ti,minimum-sys-voltage = <3000000>; /* 3V */ + ti,boost-voltage = <5000000>; /* 5V */ + ti,boost-max-current = <50000>; /* 50mA */ + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + magnetometer@1e { + compatible = "st,lsm9ds1-magn"; + reg = <0x1e>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_imu>; + interrupt-parent = <&gpio3>; + interrupts = <19 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <®_3v3_p>; + vddio-supply = <®_3v3_p>; + }; + + touchscreen@5d { + compatible = "goodix,gt5688"; + reg = <0x5d>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ts>; + interrupt-parent = <&gpio3>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; + irq-gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>; + touchscreen-size-x = <720>; + touchscreen-size-y = <1440>; + AVDD28-supply = <®_2v8_p>; + VDDIO-supply = <®_1v8_p>; + }; +}; + +&iomuxc { + pinctrl_bl: blgrp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO01_PWM1_OUT 0x6 /* DSI_BL_PWM */ + >; + }; + + pinctrl_bt: btgrp { + fsl,pins = < + MX8MQ_IOMUXC_NAND_DATA05_GPIO3_IO11 0x16 /* nBT_DISABLE */ + MX8MQ_IOMUXC_NAND_DATA01_GPIO3_IO7 0x10 /* BT_HOST_WAKE */ + >; + }; + + pinctrl_charger: chargergrp { + fsl,pins = < + MX8MQ_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x80 /* CHRG_nINT */ + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 + MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19 + MX8MQ_IOMUXC_GPIO1_IO15_CCMSRCGPCMIX_CLKO2 0x1f + >; + }; + + pinctrl_ts: tsgrp { + fsl,pins = < + MX8MQ_IOMUXC_NAND_ALE_GPIO3_IO0 0x16 /* TOUCH INT */ + MX8MQ_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x19 /* TOUCH RST */ + >; + }; + + pinctrl_gpio_leds: gpioledgrp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x16 + >; + }; + + pinctrl_gpio_keys: gpiokeygrp { + fsl,pins = < + MX8MQ_IOMUXC_SAI2_RXFS_GPIO4_IO21 0x16 + MX8MQ_IOMUXC_SAI2_RXC_GPIO4_IO22 0x16 + MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20 0x180 /* HP_DET */ + >; + }; + + pinctrl_haptic: hapticgrp { + fsl,pins = < + MX8MQ_IOMUXC_SPDIF_RX_GPIO5_IO4 0xc6 /* nHAPTIC */ + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000001f + MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x4000001f + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL 0x4000001f + MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA 0x4000001f + >; + }; + + pinctrl_imu: imugrp { + fsl,pins = < + MX8MQ_IOMUXC_SAI5_RXFS_GPIO3_IO19 0x8 /* IMU_INT */ + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x80 /* PMIC intr */ + >; + }; + + pinctrl_pwr_en: pwrengrp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x06 + >; + }; + + pinctrl_rtc: rtcgrp { + fsl,pins = < + MX8MQ_IOMUXC_SAI3_RXC_GPIO4_IO29 0x80 /* RTC intr */ + >; + }; + + pinctrl_typec: typecgrp { + fsl,pins = < + MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12 0x16 + MX8MQ_IOMUXC_NAND_CE0_B_GPIO3_IO1 0x80 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x49 + MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x49 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX 0x49 + MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX 0x49 + MX8MQ_IOMUXC_UART4_RXD_UART2_DCE_CTS_B 0x49 + MX8MQ_IOMUXC_UART4_TXD_UART2_DCE_RTS_B 0x49 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX 0x49 + MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX 0x49 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX8MQ_IOMUXC_ECSPI2_SCLK_UART4_DCE_RX 0x49 + MX8MQ_IOMUXC_ECSPI2_MOSI_UART4_DCE_TX 0x49 + MX8MQ_IOMUXC_ECSPI2_MISO_UART4_DCE_CTS_B 0x49 + MX8MQ_IOMUXC_ECSPI2_SS0_UART4_DCE_RTS_B 0x49 + MX8MQ_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x49 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83 + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc3 + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc3 + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc3 + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc3 + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc3 + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc3 + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc3 + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc3 + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc3 + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x83 + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x8d + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xcd + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xcd + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xcd + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xcd + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xcd + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xcd + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xcd + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xcd + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xcd + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x8d + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x9f + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xdf + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xdf + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xdf + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xdf + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xdf + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xdf + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xdf + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xdf + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xdf + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x9f + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 + >; + }; + + pinctrl_usdhc2_pwr: usdhc2grppwr { + fsl,pins = < + MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2grpgpio { + fsl,pins = < + MX8MQ_IOMUXC_SD2_WP_GPIO2_IO20 0x80 /* WIFI_WAKE */ + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x83 + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc3 + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc3 + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc3 + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc3 + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc3 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x8d + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xcd + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xcd + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xcd + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xcd + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xcd + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x9f + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xcf + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xcf + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xcf + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xcf + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xcf + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; + + pinctrl_wifi_pwr_en: wifipwrengrp { + fsl,pins = < + MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5 0x06 + >; + }; + + pinctrl_wwan: wwangrp { + fsl,pins = < + MX8MQ_IOMUXC_NAND_CE3_B_GPIO3_IO4 0x09 /* nWWAN_DISABLE */ + MX8MQ_IOMUXC_NAND_DATA02_GPIO3_IO8 0x80 /* nWoWWAN */ + MX8MQ_IOMUXC_NAND_DATA03_GPIO3_IO9 0x19 /* WWAN_RESET */ + >; + }; +}; + +&pgc_gpu { + power-supply = <&buck3_reg>; +}; + +&pgc_vpu { + power-supply = <&buck4_reg>; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_bl>; + status = "okay"; +}; + +&snvs_pwrkey { + status = "okay"; +}; + +&uart1 { /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart3 { /* GNSS */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&uart4 { /* BT */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>, <&pinctrl_bt>; + uart-has-rtscts; + status = "okay"; +}; + +&usb3_phy0 { + status = "okay"; +}; + +&usb3_phy1 { + vbus-supply = <®_5v_p>; + status = "okay"; +}; + +&usb_dwc3_0 { + #address-cells = <1>; + #size-cells = <0>; + dr_mode = "otg"; + status = "okay"; + + port@0 { + reg = <0>; + + typec_hs: endpoint { + remote-endpoint = <&usb_con_hs>; + }; + }; + + port@1 { + reg = <1>; + + typec_ss: endpoint { + remote-endpoint = <&usb_con_ss>; + }; + }; +}; + +&usb_dwc3_1 { + dr_mode = "host"; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + bus-width = <4>; + vmmc-supply = <®_usdhc2_vmmc>; + power-supply = <&wifi_pwr_en>; + non-removable; + disable-wp; + cap-sdio-irq; + keep-power-in-suspend; + wakeup-source; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts new file mode 100644 index 000000000000..c832bf0fcc60 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts @@ -0,0 +1,405 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2018 Boundary Devices + */ + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include "imx8mq.dtsi" + +/ { + model = "Boundary Devices i.MX8MQ Nitrogen8M"; + compatible = "boundary,imx8mq-nitrogen8m", "fsl,imx8mq"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x00000000 0x40000000 0 0x80000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + power { + label = "Power Button"; + gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + wakeup-source; + }; + }; + + reg_vref_0v9: regulator-vref-0v9 { + compatible = "regulator-fixed"; + regulator-name = "vref-0v9"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + }; + + reg_vref_1v8: regulator-vref-1v8 { + compatible = "regulator-fixed"; + regulator-name = "vref-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + reg_vref_2v5: regulator-vref-2v5 { + compatible = "regulator-fixed"; + regulator-name = "vref-2v5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + + reg_vref_3v3: regulator-vref-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vref-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_vref_5v: regulator-vref-5v { + compatible = "regulator-fixed"; + regulator-name = "vref-5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; +}; + + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@4 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <4>; + interrupts-extended = <&gpio1 11 IRQ_TYPE_LEVEL_LOW>; + }; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + i2cmux@70 { + compatible = "nxp,pca9546"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_pca9546>; + reg = <0x70>; + reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + #address-cells = <1>; + #size-cells = <0>; + + i2c1a: i2c1@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + reg_arm_dram: regulator@60 { + compatible = "fcs,fan53555"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_arm_dram>; + reg = <0x60>; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + vsel-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; + }; + }; + + i2c1b: i2c1@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + reg_dram_1p1v: regulator@60 { + compatible = "fcs,fan53555"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_dram_1p1v>; + reg = <0x60>; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + vsel-gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>; + }; + }; + + i2c1c: i2c1@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + reg_soc_gpu_vpu: regulator@60 { + compatible = "fcs,fan53555"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_soc_gpu_vpu>; + reg = <0x60>; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + vsel-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>; + }; + }; + + i2c1d: i2c1@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + rtc@68 { + compatible = "microcrystal,rv4162"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1d_rv4162>; + reg = <0x68>; + interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_LOW>; + wakeup-source; + }; + }; + }; +}; + +&uart1 { /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + assigned-clocks = <&clk IMX8MQ_CLK_UART1>; + assigned-clock-parents = <&clk IMX8MQ_CLK_25M>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + assigned-clocks = <&clk IMX8MQ_CLK_UART2>; + assigned-clock-parents = <&clk IMX8MQ_CLK_25M>; + status = "okay"; +}; + +&usdhc1 { + bus-width = <8>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + non-removable; + vmmc-supply = <®_vref_1v8>; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hoggrp { + fsl,pins = < + /* J17 connector, odd */ + MX8MQ_IOMUXC_SAI1_RXFS_GPIO4_IO0 0x19 /* Pin 19 */ + MX8MQ_IOMUXC_SAI1_RXC_GPIO4_IO1 0x19 /* Pin 21 */ + MX8MQ_IOMUXC_SAI1_RXD1_GPIO4_IO3 0x19 /* Pin 23 */ + MX8MQ_IOMUXC_SAI1_RXD2_GPIO4_IO4 0x19 /* Pin 25 */ + MX8MQ_IOMUXC_SAI1_RXD3_GPIO4_IO5 0x19 /* Pin 27 */ + MX8MQ_IOMUXC_SAI1_RXD4_GPIO4_IO6 0x19 /* Pin 29 */ + MX8MQ_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x19 /* Pin 31 */ + MX8MQ_IOMUXC_SAI1_RXD6_GPIO4_IO8 0x19 /* Pin 33 */ + MX8MQ_IOMUXC_SAI1_RXD7_GPIO4_IO9 0x19 /* Pin 35 */ + MX8MQ_IOMUXC_SAI1_TXD1_GPIO4_IO13 0x19 /* Pin 39 */ + MX8MQ_IOMUXC_SAI1_TXD2_GPIO4_IO14 0x19 /* Pin 41 */ + MX8MQ_IOMUXC_SAI1_TXD3_GPIO4_IO15 0x19 /* Pin 43 */ + MX8MQ_IOMUXC_SAI1_TXD4_GPIO4_IO16 0x19 /* Pin 45 */ + MX8MQ_IOMUXC_SAI1_TXD5_GPIO4_IO17 0x19 /* Pin 47 */ + MX8MQ_IOMUXC_SAI1_TXD6_GPIO4_IO18 0x19 /* Pin 49 */ + MX8MQ_IOMUXC_SAI1_TXD7_GPIO4_IO19 0x19 /* Pin 51 */ + + /* J17 connector, even */ + MX8MQ_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x19 /* Pin 44 */ + MX8MQ_IOMUXC_SAI3_RXC_GPIO4_IO29 0x19 /* Pin 48 */ + MX8MQ_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x19 /* Pin 50 */ + MX8MQ_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x19 /* Pin 54 */ + MX8MQ_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x19 /* Pin 56 */ + + /* J18 connector, odd */ + MX8MQ_IOMUXC_NAND_CE3_B_GPIO3_IO4 0x19 /* Pin 41 */ + MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5 0x19 /* Pin 43 */ + MX8MQ_IOMUXC_NAND_READY_B_GPIO3_IO16 0x19 /* Pin 45 */ + MX8MQ_IOMUXC_NAND_DATA05_GPIO3_IO11 0x19 /* Pin 47 */ + MX8MQ_IOMUXC_NAND_WP_B_GPIO3_IO18 0x19 /* Pin 49 */ + MX8MQ_IOMUXC_NAND_DQS_GPIO3_IO14 0x19 /* Pin 53 */ + + /* J18 connector, even */ + MX8MQ_IOMUXC_NAND_ALE_GPIO3_IO0 0x19 /* Pin 32 */ + MX8MQ_IOMUXC_NAND_CE0_B_GPIO3_IO1 0x19 /* Pin 36 */ + MX8MQ_IOMUXC_NAND_DATA00_GPIO3_IO6 0x19 /* Pin 38 */ + MX8MQ_IOMUXC_NAND_DATA01_GPIO3_IO7 0x19 /* Pin 40 */ + MX8MQ_IOMUXC_NAND_DATA02_GPIO3_IO8 0x19 /* Pin 42 */ + MX8MQ_IOMUXC_NAND_DATA03_GPIO3_IO9 0x19 /* Pin 44 */ + MX8MQ_IOMUXC_NAND_DATA04_GPIO3_IO10 0x19 /* Pin 46 */ + + /* J13 Pin 2, WL_WAKE */ + MX8MQ_IOMUXC_SAI5_RXD2_GPIO3_IO23 0xd6 + /* J13 Pin 4, WL_IRQ, not needed for Silex */ + MX8MQ_IOMUXC_SAI5_RXD0_GPIO3_IO21 0xd6 + /* J13 pin 9, unused */ + MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x19 + /* J13 Pin 41, BT_CLK_REQ */ + MX8MQ_IOMUXC_SAI5_RXD1_GPIO3_IO22 0xd6 + /* J13 Pin 42, BT_HOST_WAKE */ + MX8MQ_IOMUXC_SAI5_MCLK_GPIO3_IO25 0xd6 + + /* Clock for both CSI1 and CSI2 */ + MX8MQ_IOMUXC_GPIO1_IO15_CCMSRCGPCMIX_CLKO2 0x07 + /* test points */ + MX8MQ_IOMUXC_GPIO1_IO04_GPIO1_IO4 0xc1 /* TP87 */ + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO 0x23 + MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19 + MX8MQ_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x59 + >; + }; + + pinctrl_gpio_keys: gpio-keysgrp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x19 + >; + }; + + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000007f + MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x4000007f + >; + }; + + pinctrl_i2c1_pca9546: i2c1-pca9546grp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x49 + >; + }; + + pinctrl_i2c1d_rv4162: i2c1d-rv4162grp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x49 + >; + }; + + pinctrl_reg_arm_dram: reg-arm-dramgrp { + fsl,pins = < + MX8MQ_IOMUXC_SAI5_RXD3_GPIO3_IO24 0x16 + >; + }; + + pinctrl_reg_dram_1p1v: reg-dram-1p1vgrp { + fsl,pins = < + MX8MQ_IOMUXC_SD1_STROBE_GPIO2_IO11 0x16 + >; + }; + + pinctrl_reg_soc_gpu_vpu: reg-soc-gpu-vpugrp { + fsl,pins = < + MX8MQ_IOMUXC_SD2_WP_GPIO2_IO20 0x16 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x45 + MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x45 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX 0x45 + MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX 0x45 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83 + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc3 + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc3 + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc3 + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc3 + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc3 + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc3 + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc3 + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc3 + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc3 + MX8MQ_IOMUXC_SD1_RESET_B_GPIO2_IO10 0x41 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x8d + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xcd + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xcd + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xcd + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xcd + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xcd + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xcd + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xcd + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xcd + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xcd + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x9f + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xdf + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xdf + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xdf + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xdf + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xdf + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xdf + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xdf + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xdf + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xdf + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-pico-pi.dts b/arch/arm64/boot/dts/freescale/imx8mq-pico-pi.dts new file mode 100644 index 000000000000..8a4aee2348ee --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mq-pico-pi.dts @@ -0,0 +1,413 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018 Wandboard, Org. + * Copyright 2017 NXP + * + * Author: Richard Hu <hakahu@gmail.com> + */ + +/dts-v1/; + +#include "imx8mq.dtsi" + +/ { + model = "TechNexion PICO-PI-8M"; + compatible = "technexion,pico-pi-imx8m", "fsl,imx8mq"; + + chosen { + stdout-path = &uart1; + }; + + pmic_osc: clock-pmic { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "pmic_osc"; + }; + + reg_usb_otg_vbus: regulator-usb-otg-vbus { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_otg_vbus>; + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 14 GPIO_ACTIVE_LOW>; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1 &pinctrl_enet_3v3>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic: pmic@4b { + reg = <0x4b>; + compatible = "rohm,bd71837"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + clocks = <&pmic_osc>; + clock-names = "osc"; + clock-output-names = "pmic_clk"; + interrupt-parent = <&gpio1>; + interrupts = <3 GPIO_ACTIVE_LOW>; + interrupt-names = "irq"; + + regulators { + buck1: BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <900000>; + rohm,dvs-idle-voltage = <850000>; + rohm,dvs-suspend-voltage = <800000>; + }; + + buck2: BUCK2 { + regulator-name = "buck2"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <1000000>; + rohm,dvs-idle-voltage = <900000>; + }; + + buck3: BUCK3 { + regulator-name = "buck3"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + rohm,dvs-run-voltage = <1000000>; + }; + + buck4: BUCK4 { + regulator-name = "buck4"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + rohm,dvs-run-voltage = <1000000>; + }; + + buck5: BUCK5 { + regulator-name = "buck5"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + }; + + buck6: BUCK6 { + regulator-name = "buck6"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + buck7: BUCK7 { + regulator-name = "buck7"; + regulator-min-microvolt = <1605000>; + regulator-max-microvolt = <1995000>; + regulator-boot-on; + }; + + buck8: BUCK8 { + regulator-name = "buck8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-boot-on; + }; + + ldo1: LDO1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2: LDO2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3: LDO3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + ldo4: LDO4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + ldo5: LDO5 { + regulator-name = "ldo5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + ldo6: LDO6 { + regulator-name = "ldo6"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + ldo7: LDO7 { + regulator-name = "ldo7"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + }; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&uart1 { /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + bus-width = <4>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&usb3_phy0 { + status = "okay"; +}; + +&usb3_phy1 { + status = "okay"; +}; + +&usb_dwc3_1 { + dr_mode = "host"; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_enet_3v3: enet3v3grp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x19 + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO 0x23 + MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000007f + MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x4000007f + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL 0x4000007f + MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA 0x4000007f + >; + }; + + pinctrl_otg_vbus: otgvbusgrp { + fsl,pins = < + MX8MQ_IOMUXC_NAND_DQS_GPIO3_IO14 0x19 /* USB OTG VBUS Enable */ + >; + }; + + pinctrl_pmic: pmicirq { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x49 + MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x49 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX 0x49 + MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX 0x49 + MX8MQ_IOMUXC_UART4_RXD_UART2_DCE_CTS_B 0x49 + MX8MQ_IOMUXC_UART4_TXD_UART2_DCE_RTS_B 0x49 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83 + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc3 + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc3 + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc3 + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc3 + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc3 + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc3 + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc3 + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc3 + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc3 + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x83 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x85 + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc5 + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc5 + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc5 + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc5 + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc5 + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc5 + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc5 + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc5 + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc5 + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x85 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x87 + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc7 + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc7 + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc7 + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc7 + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc7 + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc7 + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc7 + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc7 + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc7 + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x87 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2grpgpio { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x41 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x83 + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc3 + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc3 + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc3 + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc3 + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc3 + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x85 + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc5 + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc5 + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc5 + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc5 + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc5 + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x87 + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc7 + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc7 + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc7 + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc7 + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc7 + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi new file mode 100644 index 000000000000..d7f03c65832b --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi @@ -0,0 +1,309 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2018 Jon Nettleton <jon@solid-run.com> + */ + +#include "imx8mq.dtsi" + +/ { + reg_vdd_3v3: regulator-vdd-3v3 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-name = "vdd_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + phy-reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + phy-reset-duration = <2>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@4 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <4>; + }; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + clock-frequency = <400000>; + status = "okay"; + + pmic: pmic@8 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + sw3a_reg: sw3ab { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + regulator-always-on; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; +}; + +&pgc_gpu{ + power-supply = <&sw1a_reg>; +}; + +&pgc_vpu { + power-supply = <&sw1c_reg>; +}; + +&qspi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi>; + status = "okay"; + + /* SPI flash; not assembled by default */ + spi_flash: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + compatible = "micron,n25q256a", "jedec,spi-nor"; + spi-max-frequency = <29000000>; + status = "disabled"; + }; +}; + +&uart1 { /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + assigned-clocks = <&clk IMX8MQ_CLK_UART1>; + assigned-clock-parents = <&clk IMX8MQ_CLK_25M>; + assigned-clock-rates = <25000000>; + status = "okay"; +}; + +&uart4 { /* ublox BT */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + assigned-clocks = <&clk IMX8MQ_CLK_UART4>; + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>; + assigned-clock-rates = <80000000>; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_fec1: fec1grp { + fsl,pins = < + MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO 0x23 + MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000007f + MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x4000007f + >; + }; + + pinctrl_pcie0: pcie0grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C4_SCL_PCIE1_CLKREQ_B 0x74 + MX8MQ_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5 0x16 + MX8MQ_IOMUXC_SAI2_RXFS_GPIO4_IO21 0x16 + >; + }; + + pinctrl_qspi: qspigrp { + fsl,pins = < + MX8MQ_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x82 + MX8MQ_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82 + MX8MQ_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x82 + MX8MQ_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x82 + MX8MQ_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x82 + MX8MQ_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x82 + + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x49 + MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x49 + MX8MQ_IOMUXC_NAND_CE1_B_GPIO3_IO2 0x19 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX8MQ_IOMUXC_UART4_TXD_UART4_DCE_TX 0x49 + MX8MQ_IOMUXC_UART4_RXD_UART4_DCE_RX 0x49 + MX8MQ_IOMUXC_SAI3_TXD_GPIO5_IO1 0x19 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83 + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc3 + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc3 + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc3 + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc3 + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc3 + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc3 + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc3 + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc3 + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc3 + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x83 + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x8d + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xcd + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xcd + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xcd + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xcd + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xcd + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xcd + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xcd + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xcd + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xcd + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x8d + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x9f + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xdf + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xdf + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xdf + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xdf + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xdf + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xdf + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xdf + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xdf + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xdf + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x9f + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi index 7a1706f969f0..af99473ada04 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi @@ -68,18 +68,6 @@ regulator-always-on; }; - reg_5p0_user_usb: regulator-5p0-user-usb { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_reg_user_usb>; - vin-supply = <®_5p0_main>; - regulator-name = "5V_USER_USB"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio3 12 GPIO_ACTIVE_LOW>; - startup-delay-us = <1000>; - }; - reg_usdhc2_vmmc: regulator-vsd-3v3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_reg_usdhc2>; @@ -244,6 +232,13 @@ line-name = "usb-mode1"; }; + usb-pwr { + gpio-hog; + gpios = <12 GPIO_ACTIVE_LOW>; + output-high; + line-name = "usb-pwr-ctrl-en-n"; + }; + usb-mode2 { gpio-hog; gpios = <13 GPIO_ACTIVE_HIGH>; @@ -257,6 +252,17 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; + + ucs1002: charger@32 { + compatible = "microchip,ucs1002"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ucs1002>; + reg = <0x32>; + interrupt-parent = <&gpio3>; + interrupts = <17 IRQ_TYPE_EDGE_BOTH>, + <18 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "a_det", "alert"; + }; }; &i2c2 { @@ -428,7 +434,7 @@ }; &usb3_phy0 { - vbus-supply = <®_5p0_user_usb>; + vbus-supply = <&ucs1002>; status = "okay"; }; @@ -532,6 +538,7 @@ fsl,pins = < MX8MQ_IOMUXC_NAND_DATA04_GPIO3_IO10 0x6 MX8MQ_IOMUXC_NAND_DATA05_GPIO3_IO11 0x6 + MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12 0x6 MX8MQ_IOMUXC_NAND_DATA07_GPIO3_IO13 0x6 >; }; @@ -597,12 +604,6 @@ >; }; - pinctrl_reg_user_usb: reguserusbgrp { - fsl,pins = < - MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12 0x6 - >; - }; - pinctrl_switch_irq: switchgrp { fsl,pins = < MX8MQ_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x41 @@ -630,6 +631,13 @@ >; }; + pinctrl_ucs1002: ucs1002grp { + fsl,pins = < + MX8MQ_IOMUXC_NAND_WE_B_GPIO3_IO17 0x41 + MX8MQ_IOMUXC_NAND_WP_B_GPIO3_IO18 0x41 + >; + }; + pinctrl_usbhub: usbhubgrp { fsl,pins = < MX8MQ_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x41 diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index 6d635ba0904c..04115ca6bfb5 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/power/imx8mq-power.h> #include <dt-bindings/reset/imx8mq-reset.h> #include <dt-bindings/gpio/gpio.h> +#include "dt-bindings/input/input.h" #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/thermal/thermal.h> #include "imx8mq-pinfunc.h" @@ -19,6 +20,11 @@ #size-cells = <2>; aliases { + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; i2c0 = &i2c1; i2c1 = &i2c2; i2c2 = &i2c3; @@ -95,6 +101,8 @@ next-level-cache = <&A53_L2>; operating-points-v2 = <&a53_opp_table>; #cooling-cells = <2>; + nvmem-cells = <&cpu_speed_grade>; + nvmem-cell-names = "speed_grade"; }; A53_1: cpu@1 { @@ -145,12 +153,33 @@ opp-800000000 { opp-hz = /bits/ 64 <800000000>; opp-microvolt = <900000>; + /* Industrial only */ + opp-supported-hw = <0xf>, <0x4>; clock-latency-ns = <150000>; + opp-suspend; + }; + + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <900000>; + /* Consumer only */ + opp-supported-hw = <0xe>, <0x3>; + clock-latency-ns = <150000>; + opp-suspend; }; opp-1300000000 { opp-hz = /bits/ 64 <1300000000>; opp-microvolt = <1000000>; + opp-supported-hw = <0xc>, <0x4>; + clock-latency-ns = <150000>; + opp-suspend; + }; + + opp-1500000000 { + opp-hz = /bits/ 64 <1500000000>; + opp-microvolt = <1000000>; + opp-supported-hw = <0x8>, <0x3>; clock-latency-ns = <150000>; opp-suspend; }; @@ -262,6 +291,7 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 10 30>; }; gpio2: gpio@30210000 { @@ -274,6 +304,7 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 40 21>; }; gpio3: gpio@30220000 { @@ -286,6 +317,7 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 61 26>; }; gpio4: gpio@30230000 { @@ -298,6 +330,7 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 87 32>; }; gpio5: gpio@30240000 { @@ -310,12 +343,14 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 119 30>; }; tmu: tmu@30260000 { compatible = "fsl,imx8mq-tmu"; reg = <0x30260000 0x10000>; interrupt = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_TMU_ROOT>; little-endian; fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x70061>; fsl,tmu-calibration = <0x00000000 0x00000023 @@ -405,8 +440,15 @@ }; iomuxc_gpr: syscon@30340000 { - compatible = "fsl,imx8mq-iomuxc-gpr", "fsl,imx6q-iomuxc-gpr", "syscon"; + compatible = "fsl,imx8mq-iomuxc-gpr", "fsl,imx6q-iomuxc-gpr", + "syscon", "simple-mfd"; reg = <0x30340000 0x10000>; + + mux: mux-controller { + compatible = "mmio-mux"; + #mux-control-cells = <1>; + mux-reg-masks = <0x34 0x00000004>; /* MIPI_MUX_SEL */ + }; }; ocotp: ocotp-ctrl@30350000 { @@ -415,6 +457,10 @@ clocks = <&clk IMX8MQ_CLK_OCOTP_ROOT>; #address-cells = <1>; #size-cells = <1>; + + cpu_speed_grade: speed-grade@10 { + reg = <0x10 4>; + }; }; anatop: syscon@30360000 { @@ -433,8 +479,18 @@ offset = <0x34>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_SNVS_ROOT>; + clock-names = "snvs-rtc"; }; + snvs_pwrkey: snvs-powerkey { + compatible = "fsl,sec-v4.0-pwrkey"; + regmap = <&snvs>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + linux,keycode = <KEY_POWER>; + wakeup-source; + status = "disabled"; + }; }; clk: clock-controller@30380000 { @@ -595,6 +651,14 @@ #pwm-cells = <2>; status = "disabled"; }; + + system_counter: timer@306a0000 { + compatible = "nxp,sysctr-timer"; + reg = <0x306a0000 0x20000>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc_25m>; + clock-names = "per"; + }; }; bus@30800000 { /* AIPS3 */ @@ -675,8 +739,7 @@ sai2: sai@308b0000 { #sound-dai-cells = <0>; - compatible = "fsl,imx8mq-sai", - "fsl,imx6sx-sai"; + compatible = "fsl,imx8mq-sai"; reg = <0x308b0000 0x10000>; interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX8MQ_CLK_SAI2_IPG>, @@ -688,6 +751,49 @@ status = "disabled"; }; + crypto: crypto@30900000 { + compatible = "fsl,sec-v4.0"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x30900000 0x40000>; + ranges = <0 0x30900000 0x40000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_AHB>, + <&clk IMX8MQ_CLK_IPG_ROOT>; + clock-names = "aclk", "ipg"; + + sec_jr0: jr@1000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x1000 0x1000>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr1: jr@2000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x2000 0x1000>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr2: jr@3000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x3000 0x1000>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + dphy: dphy@30a00300 { + compatible = "fsl,imx8mq-mipi-dphy"; + reg = <0x30a00300 0x100>; + clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>; + clock-names = "phy_ref"; + assigned-clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>; + assigned-clock-parents = <&clk IMX8MQ_VIDEO_PLL1_OUT>; + assigned-clock-rates = <24000000>; + #phy-cells = <0>; + power-domains = <&pgc_mipi>; + status = "disabled"; + }; + i2c1: i2c@30a20000 { compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c"; reg = <0x30a20000 0x10000>; @@ -815,6 +921,25 @@ }; }; + bus@32c00000 { /* AIPS4 */ + compatible = "fsl,imx8mq-aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x32c00000 0x32c00000 0x400000>; + + irqsteer: interrupt-controller@32e2d000 { + compatible = "fsl,imx8m-irqsteer", "fsl,imx-irqsteer"; + reg = <0x32e2d000 0x1000>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_DISP_APB_ROOT>; + clock-names = "ipg"; + fsl,channel = <0>; + fsl,num-irqs = <64>; + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + gpu: gpu@38000000 { compatible = "vivante,gc"; reg = <0x38000000 0x40000>; @@ -842,9 +967,9 @@ usb_dwc3_0: usb@38100000 { compatible = "fsl,imx8mq-dwc3", "snps,dwc3"; reg = <0x38100000 0x10000>; - clocks = <&clk IMX8MQ_CLK_USB_BUS>, + clocks = <&clk IMX8MQ_CLK_USB1_CTRL_ROOT>, <&clk IMX8MQ_CLK_USB_CORE_REF>, - <&clk IMX8MQ_CLK_USB1_CTRL_ROOT>; + <&clk IMX8MQ_CLK_32K>; clock-names = "bus_early", "ref", "suspend"; assigned-clocks = <&clk IMX8MQ_CLK_USB_BUS>, <&clk IMX8MQ_CLK_USB_CORE_REF>; @@ -874,9 +999,9 @@ usb_dwc3_1: usb@38200000 { compatible = "fsl,imx8mq-dwc3", "snps,dwc3"; reg = <0x38200000 0x10000>; - clocks = <&clk IMX8MQ_CLK_USB_BUS>, + clocks = <&clk IMX8MQ_CLK_USB2_CTRL_ROOT>, <&clk IMX8MQ_CLK_USB_CORE_REF>, - <&clk IMX8MQ_CLK_USB2_CTRL_ROOT>; + <&clk IMX8MQ_CLK_32K>; clock-names = "bus_early", "ref", "suspend"; assigned-clocks = <&clk IMX8MQ_CLK_USB_BUS>, <&clk IMX8MQ_CLK_USB_CORE_REF>; @@ -903,7 +1028,6 @@ status = "disabled"; }; - pcie0: pcie@33800000 { compatible = "fsl,imx8mq-pcie"; reg = <0x33800000 0x400000>, @@ -975,5 +1099,12 @@ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&gic>; }; + + ddr-pmu@3d800000 { + compatible = "fsl,imx8mq-ddr-pmu", "fsl,imx8m-ddr-pmu"; + reg = <0x3d800000 0x400000>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + }; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts b/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts new file mode 100644 index 000000000000..91eef9754101 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts @@ -0,0 +1,249 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018 Einfochips + * Copyright 2019 Linaro Ltd. + */ + +/dts-v1/; + +#include "imx8qxp.dtsi" + +/ { + model = "Einfochips i.MX8QXP AI_ML"; + compatible = "einfochips,imx8qxp-ai_ml", "fsl,imx8qxp"; + + aliases { + serial1 = &adma_lpuart1; + serial2 = &adma_lpuart2; + serial3 = &adma_lpuart3; + }; + + chosen { + stdout-path = &adma_lpuart2; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x00000000 0x80000000 0 0x80000000>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + user-led1 { + label = "green:user1"; + gpios = <&lsio_gpio4 16 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + user-led2 { + label = "green:user2"; + gpios = <&lsio_gpio0 6 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + }; + + user-led3 { + label = "green:user3"; + gpios = <&lsio_gpio0 7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc1"; + default-state = "off"; + }; + + user-led4 { + label = "green:user4"; + gpios = <&lsio_gpio4 21 GPIO_ACTIVE_HIGH>; + panic-indicator; + linux,default-trigger = "none"; + }; + + wlan-active-led { + label = "yellow:wlan"; + gpios = <&lsio_gpio4 17 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + + bt-active-led { + label = "blue:bt"; + gpios = <&lsio_gpio4 18 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "hci0-power"; + default-state = "off"; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_reg_on>; + reset-gpios = <&lsio_gpio3 24 GPIO_ACTIVE_LOW>; + }; +}; + +/* BT */ +&adma_lpuart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart0>; + uart-has-rtscts; + status = "okay"; +}; + +/* LS-UART0 */ +&adma_lpuart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart1>; + status = "okay"; +}; + +/* Debug */ +&adma_lpuart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart2>; + status = "okay"; +}; + +/* PCI-E UART */ +&adma_lpuart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart3>; + status = "okay"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; + }; +}; + +/* WiFi */ +&usdhc1 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + bus-width = <4>; + no-sd; + non-removable; + mmc-pwrseq = <&sdio_pwrseq>; + status = "okay"; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +/* SD */ +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + cd-gpios = <&lsio_gpio4 22 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&iomuxc { + pinctrl_fec1: fec1grp { + fsl,pins = < + IMX8QXP_ENET0_MDC_CONN_ENET0_MDC 0x06000020 + IMX8QXP_ENET0_MDIO_CONN_ENET0_MDIO 0x06000020 + IMX8QXP_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL 0x06000020 + IMX8QXP_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC 0x06000020 + IMX8QXP_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0 0x06000020 + IMX8QXP_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1 0x06000020 + IMX8QXP_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2 0x06000020 + IMX8QXP_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3 0x06000020 + IMX8QXP_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC 0x06000020 + IMX8QXP_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL 0x06000020 + IMX8QXP_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0 0x06000020 + IMX8QXP_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1 0x06000020 + IMX8QXP_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2 0x06000020 + IMX8QXP_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3 0x06000020 + >; + }; + + pinctrl_leds: ledsgrp{ + fsl,pins = < + IMX8QXP_ESAI0_TX2_RX3_LSIO_GPIO0_IO06 0x00000021 + IMX8QXP_ESAI0_TX3_RX2_LSIO_GPIO0_IO07 0x00000021 + IMX8QXP_EMMC0_DATA7_LSIO_GPIO4_IO16 0x00000021 + IMX8QXP_USDHC1_WP_LSIO_GPIO4_IO21 0x00000021 + IMX8QXP_EMMC0_STROBE_LSIO_GPIO4_IO17 0x00000021 + IMX8QXP_EMMC0_RESET_B_LSIO_GPIO4_IO18 0x00000021 + >; + }; + + pinctrl_lpuart0: lpuart0grp { + fsl,pins = < + IMX8QXP_UART0_RX_ADMA_UART0_RX 0X06000020 + IMX8QXP_UART0_TX_ADMA_UART0_TX 0X06000020 + IMX8QXP_FLEXCAN0_TX_ADMA_UART0_CTS_B 0x06000020 + IMX8QXP_FLEXCAN0_RX_ADMA_UART0_RTS_B 0x06000020 + >; + }; + + pinctrl_lpuart1: lpuart1grp { + fsl,pins = < + IMX8QXP_UART1_RX_ADMA_UART1_RX 0X06000020 + IMX8QXP_UART1_TX_ADMA_UART1_TX 0X06000020 + >; + }; + + pinctrl_lpuart2: lpuart2grp { + fsl,pins = < + IMX8QXP_UART2_RX_ADMA_UART2_RX 0X06000020 + IMX8QXP_UART2_TX_ADMA_UART2_TX 0X06000020 + >; + }; + + pinctrl_lpuart3: lpuart3grp { + fsl,pins = < + IMX8QXP_FLEXCAN2_RX_ADMA_UART3_RX 0X06000020 + IMX8QXP_FLEXCAN2_TX_ADMA_UART3_TX 0X06000020 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 + IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021 + IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021 + IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021 + IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021 + IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 + IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD 0x00000021 + IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000021 + IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000021 + IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000021 + IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000021 + IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000021 + IMX8QXP_USDHC1_CD_B_LSIO_GPIO4_IO22 0x00000021 + >; + }; + + pinctrl_wifi_reg_on: wifiregongrp { + fsl,pins = < + IMX8QXP_QSPI0B_SS1_B_LSIO_GPIO3_IO24 0x00000021 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts index bfdada2db176..19468058e6ae 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts +++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts @@ -230,3 +230,7 @@ >; }; }; + +&adma_dsp { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi index 0683ee2a48ae..1133b412182a 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi @@ -17,11 +17,22 @@ #size-cells = <2>; aliases { + gpio0 = &lsio_gpio0; + gpio1 = &lsio_gpio1; + gpio2 = &lsio_gpio2; + gpio3 = &lsio_gpio3; + gpio4 = &lsio_gpio4; + gpio5 = &lsio_gpio5; + gpio6 = &lsio_gpio6; + gpio7 = &lsio_gpio7; mmc0 = &usdhc1; mmc1 = &usdhc2; mmc2 = &usdhc3; - serial0 = &adma_lpuart0; mu1 = &lsio_mu1; + serial0 = &adma_lpuart0; + serial1 = &adma_lpuart1; + serial2 = &adma_lpuart2; + serial3 = &adma_lpuart3; }; cpus { @@ -105,6 +116,17 @@ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + dsp_reserved: dsp@92400000 { + reg = <0 0x92400000 0 0x2000000>; + no-map; + }; + }; + pmu { compatible = "arm,armv8-pmuv3"; interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; @@ -141,6 +163,12 @@ compatible = "fsl,imx8qxp-iomuxc"; }; + ocotp: imx8qx-ocotp { + compatible = "fsl,imx8qxp-scu-ocotp"; + #address-cells = <1>; + #size-cells = <1>; + }; + pd: imx8qx-pd { compatible = "fsl,imx8qxp-scu-pd"; #power-domain-cells = <1>; @@ -149,6 +177,11 @@ rtc: rtc { compatible = "fsl,imx8qxp-sc-rtc"; }; + + watchdog { + compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt"; + timeout-sec = <60>; + }; }; timer { @@ -185,13 +218,35 @@ #clock-cells = <1>; }; + adma_dsp: dsp@596e8000 { + compatible = "fsl,imx8qxp-dsp"; + reg = <0x596e8000 0x88000>; + clocks = <&adma_lpcg IMX_ADMA_LPCG_DSP_IPG_CLK>, + <&adma_lpcg IMX_ADMA_LPCG_OCRAM_IPG_CLK>, + <&adma_lpcg IMX_ADMA_LPCG_DSP_CORE_CLK>; + clock-names = "ipg", "ocram", "core"; + power-domains = <&pd IMX_SC_R_MU_13A>, + <&pd IMX_SC_R_MU_13B>, + <&pd IMX_SC_R_DSP>, + <&pd IMX_SC_R_DSP_RAM>; + mbox-names = "txdb0", "txdb1", + "rxdb0", "rxdb1"; + mboxes = <&lsio_mu13 2 0>, + <&lsio_mu13 2 1>, + <&lsio_mu13 3 0>, + <&lsio_mu13 3 1>; + memory-region = <&dsp_reserved>; + status = "disabled"; + }; + adma_lpuart0: serial@5a060000 { compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; reg = <0x5a060000 0x1000>; interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&gic>; - clocks = <&adma_lpcg IMX_ADMA_LPCG_UART0_BAUD_CLK>; - clock-names = "ipg"; + clocks = <&adma_lpcg IMX_ADMA_LPCG_UART0_IPG_CLK>, + <&adma_lpcg IMX_ADMA_LPCG_UART0_BAUD_CLK>; + clock-names = "ipg", "baud"; power-domains = <&pd IMX_SC_R_UART_0>; status = "disabled"; }; @@ -201,8 +256,9 @@ reg = <0x5a070000 0x1000>; interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&gic>; - clocks = <&adma_lpcg IMX_ADMA_LPCG_UART1_BAUD_CLK>; - clock-names = "ipg"; + clocks = <&adma_lpcg IMX_ADMA_LPCG_UART1_IPG_CLK>, + <&adma_lpcg IMX_ADMA_LPCG_UART1_BAUD_CLK>; + clock-names = "ipg", "baud"; power-domains = <&pd IMX_SC_R_UART_1>; status = "disabled"; }; @@ -212,8 +268,9 @@ reg = <0x5a080000 0x1000>; interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&gic>; - clocks = <&adma_lpcg IMX_ADMA_LPCG_UART2_BAUD_CLK>; - clock-names = "ipg"; + clocks = <&adma_lpcg IMX_ADMA_LPCG_UART2_IPG_CLK>, + <&adma_lpcg IMX_ADMA_LPCG_UART2_BAUD_CLK>; + clock-names = "ipg", "baud"; power-domains = <&pd IMX_SC_R_UART_2>; status = "disabled"; }; @@ -223,8 +280,9 @@ reg = <0x5a090000 0x1000>; interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&gic>; - clocks = <&adma_lpcg IMX_ADMA_LPCG_UART3_BAUD_CLK>; - clock-names = "ipg"; + clocks = <&adma_lpcg IMX_ADMA_LPCG_UART3_IPG_CLK>, + <&adma_lpcg IMX_ADMA_LPCG_UART3_BAUD_CLK>; + clock-names = "ipg", "baud"; power-domains = <&pd IMX_SC_R_UART_3>; status = "disabled"; }; @@ -378,56 +436,25 @@ }; }; - lsio_subsys: bus@5d000000 { + ddr_subsyss: bus@5c000000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges = <0x5d000000 0x0 0x5d000000 0x1000000>; - - lsio_lpcg: clock-controller@5d400000 { - compatible = "fsl,imx8qxp-lpcg-lsio"; - reg = <0x5d400000 0x400000>; - #clock-cells = <1>; - }; + ranges = <0x5c000000 0x0 0x5c000000 0x1000000>; - lsio_mu0: mailbox@5d1b0000 { - compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; - reg = <0x5d1b0000 0x10000>; - interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; - #mbox-cells = <2>; - status = "disabled"; - }; - - lsio_mu1: mailbox@5d1c0000 { - compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; - reg = <0x5d1c0000 0x10000>; - interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; - #mbox-cells = <2>; - }; - - lsio_mu2: mailbox@5d1d0000 { - compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; - reg = <0x5d1d0000 0x10000>; - interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; - #mbox-cells = <2>; - status = "disabled"; - }; - - lsio_mu3: mailbox@5d1e0000 { - compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; - reg = <0x5d1e0000 0x10000>; - interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>; - #mbox-cells = <2>; - status = "disabled"; + ddr-pmu@5c020000 { + compatible = "fsl,imx8-ddr-pmu"; + reg = <0x5c020000 0x10000>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; }; + }; - lsio_mu4: mailbox@5d1f0000 { - compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; - reg = <0x5d1f0000 0x10000>; - interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; - #mbox-cells = <2>; - status = "disabled"; - }; + lsio_subsys: bus@5d000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x5d000000 0x0 0x5d000000 0x1000000>; lsio_gpio0: gpio@5d080000 { compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; @@ -516,10 +543,58 @@ #interrupt-cells = <2>; power-domains = <&pd IMX_SC_R_GPIO_7>; }; - }; - watchdog { - compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt"; - timeout-sec = <60>; + lsio_mu0: mailbox@5d1b0000 { + compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; + reg = <0x5d1b0000 0x10000>; + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + status = "disabled"; + }; + + lsio_mu1: mailbox@5d1c0000 { + compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; + reg = <0x5d1c0000 0x10000>; + interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + }; + + lsio_mu2: mailbox@5d1d0000 { + compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; + reg = <0x5d1d0000 0x10000>; + interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + status = "disabled"; + }; + + lsio_mu3: mailbox@5d1e0000 { + compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; + reg = <0x5d1e0000 0x10000>; + interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + status = "disabled"; + }; + + lsio_mu4: mailbox@5d1f0000 { + compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; + reg = <0x5d1f0000 0x10000>; + interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + status = "disabled"; + }; + + lsio_mu13: mailbox@5d280000 { + compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; + reg = <0x5d280000 0x10000>; + interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + power-domains = <&pd IMX_SC_R_MU_13A>; + }; + + lsio_lpcg: clock-controller@5d400000 { + compatible = "fsl,imx8qxp-lpcg-lsio"; + reg = <0x5d400000 0x400000>; + #clock-cells = <1>; + }; }; }; diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-coresight.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660-coresight.dtsi new file mode 100644 index 000000000000..d607f2f6698c --- /dev/null +++ b/arch/arm64/boot/dts/hisilicon/hi3660-coresight.dtsi @@ -0,0 +1,456 @@ +// SPDX-License-Identifier: GPL-2.0 + +/* + * dtsi for Hisilicon Hi3660 Coresight + * + * Copyright (C) 2016-2018 Hisilicon Ltd. + * + * Author: Wanglai Shi <shiwanglai@hisilicon.com> + * + */ +/ { + soc { + /* A53 cluster internals */ + etm@ecc40000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0xecc40000 0 0x1000>; + clocks = <&crg_ctrl HI3660_PCLK>; + clock-names = "apb_pclk"; + cpu = <&cpu0>; + + out-ports { + port { + etm0_out: endpoint { + remote-endpoint = + <&cluster0_funnel_in0>; + }; + }; + }; + }; + + etm@ecd40000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0xecd40000 0 0x1000>; + clocks = <&crg_ctrl HI3660_PCLK>; + clock-names = "apb_pclk"; + cpu = <&cpu1>; + + out-ports { + port { + etm1_out: endpoint { + remote-endpoint = + <&cluster0_funnel_in1>; + }; + }; + }; + }; + + etm@ece40000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0xece40000 0 0x1000>; + clocks = <&crg_ctrl HI3660_PCLK>; + clock-names = "apb_pclk"; + cpu = <&cpu2>; + + out-ports { + port { + etm2_out: endpoint { + remote-endpoint = + <&cluster0_funnel_in2>; + }; + }; + }; + }; + + etm@ecf40000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0xecf40000 0 0x1000>; + clocks = <&crg_ctrl HI3660_PCLK>; + clock-names = "apb_pclk"; + cpu = <&cpu3>; + + out-ports { + port { + etm3_out: endpoint { + remote-endpoint = + <&cluster0_funnel_in3>; + }; + }; + }; + }; + + funnel@ec801000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0xec801000 0 0x1000>; + clocks = <&crg_ctrl HI3660_PCLK>; + clock-names = "apb_pclk"; + + out-ports { + port { + cluster0_funnel_out: endpoint { + remote-endpoint = + <&cluster0_etf_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + cluster0_funnel_in0: endpoint { + remote-endpoint = <&etm0_out>; + }; + }; + + port@1 { + reg = <1>; + cluster0_funnel_in1: endpoint { + remote-endpoint = <&etm1_out>; + }; + }; + + port@2 { + reg = <2>; + cluster0_funnel_in2: endpoint { + remote-endpoint = <&etm2_out>; + }; + }; + + port@3 { + reg = <3>; + cluster0_funnel_in3: endpoint { + remote-endpoint = <&etm3_out>; + }; + }; + }; + }; + + etf@ec802000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0xec802000 0 0x1000>; + clocks = <&crg_ctrl HI3660_PCLK>; + clock-names = "apb_pclk"; + + in-ports { + port { + cluster0_etf_in: endpoint { + remote-endpoint = + <&cluster0_funnel_out>; + }; + }; + }; + + out-ports { + port { + cluster0_etf_out: endpoint { + remote-endpoint = + <&combo_funnel_in0>; + }; + }; + }; + }; + + /* A73 cluster internals */ + etm@ed440000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0xed440000 0 0x1000>; + clocks = <&crg_ctrl HI3660_PCLK>; + clock-names = "apb_pclk"; + cpu = <&cpu4>; + + out-ports { + port { + etm4_out: endpoint { + remote-endpoint = + <&cluster1_funnel_in0>; + }; + }; + }; + }; + + etm@ed540000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0xed540000 0 0x1000>; + clocks = <&crg_ctrl HI3660_PCLK>; + clock-names = "apb_pclk"; + cpu = <&cpu5>; + + out-ports { + port { + etm5_out: endpoint { + remote-endpoint = + <&cluster1_funnel_in1>; + }; + }; + }; + }; + + etm@ed640000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0xed640000 0 0x1000>; + clocks = <&crg_ctrl HI3660_PCLK>; + clock-names = "apb_pclk"; + cpu = <&cpu6>; + + out-ports { + port { + etm6_out: endpoint { + remote-endpoint = + <&cluster1_funnel_in2>; + }; + }; + }; + }; + + etm@ed740000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0xed740000 0 0x1000>; + clocks = <&crg_ctrl HI3660_PCLK>; + clock-names = "apb_pclk"; + cpu = <&cpu7>; + + out-ports { + port { + etm7_out: endpoint { + remote-endpoint = + <&cluster1_funnel_in3>; + }; + }; + }; + }; + + funnel@ed001000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0xed001000 0 0x1000>; + clocks = <&crg_ctrl HI3660_PCLK>; + clock-names = "apb_pclk"; + out-ports { + port { + cluster1_funnel_out: endpoint { + remote-endpoint = + <&cluster1_etf_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + cluster1_funnel_in0: endpoint { + remote-endpoint = <&etm4_out>; + }; + }; + + port@1 { + reg = <1>; + cluster1_funnel_in1: endpoint { + remote-endpoint = <&etm5_out>; + }; + }; + + port@2 { + reg = <2>; + cluster1_funnel_in2: endpoint { + remote-endpoint = <&etm6_out>; + }; + }; + + port@3 { + reg = <3>; + cluster1_funnel_in3: endpoint { + remote-endpoint = <&etm7_out>; + }; + }; + }; + }; + + etf@ed002000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0xed002000 0 0x1000>; + clocks = <&crg_ctrl HI3660_PCLK>; + clock-names = "apb_pclk"; + + in-ports { + port { + cluster1_etf_in: endpoint { + remote-endpoint = + <&cluster1_funnel_out>; + }; + }; + }; + + out-ports { + port { + cluster1_etf_out: endpoint { + remote-endpoint = + <&combo_funnel_in1>; + }; + }; + }; + }; + + /* An invisible combo funnel between clusters and top funnel */ + funnel { + compatible = "arm,coresight-static-funnel"; + clocks = <&crg_ctrl HI3660_PCLK>; + clock-names = "apb_pclk"; + + out-ports { + port { + combo_funnel_out: endpoint { + remote-endpoint = + <&top_funnel_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + combo_funnel_in0: endpoint { + remote-endpoint = + <&cluster0_etf_out>; + }; + }; + + port@1 { + reg = <1>; + combo_funnel_in1: endpoint { + remote-endpoint = + <&cluster1_etf_out>; + }; + }; + }; + }; + + /* Top internals */ + funnel@ec031000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0xec031000 0 0x1000>; + clocks = <&crg_ctrl HI3660_PCLK>; + clock-names = "apb_pclk"; + + out-ports { + port { + top_funnel_out: endpoint { + remote-endpoint = + <&top_etf_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + top_funnel_in: endpoint { + remote-endpoint = + <&combo_funnel_out>; + }; + }; + }; + }; + + etf@ec036000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0xec036000 0 0x1000>; + clocks = <&crg_ctrl HI3660_PCLK>; + clock-names = "apb_pclk"; + + in-ports { + port { + top_etf_in: endpoint { + remote-endpoint = + <&top_funnel_out>; + }; + }; + }; + + out-ports { + port { + top_etf_out: endpoint { + remote-endpoint = + <&replicator_in>; + }; + }; + }; + }; + + replicator { + compatible = "arm,coresight-static-replicator"; + clocks = <&crg_ctrl HI3660_PCLK>; + clock-names = "apb_pclk"; + + in-ports { + port { + replicator_in: endpoint { + remote-endpoint = + <&top_etf_out>; + }; + }; + }; + + out-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + replicator0_out0: endpoint { + remote-endpoint = <&etr_in>; + }; + }; + + port@1 { + reg = <1>; + replicator0_out1: endpoint { + remote-endpoint = <&tpiu_in>; + }; + }; + }; + }; + + etr@ec033000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0xec033000 0 0x1000>; + clocks = <&crg_ctrl HI3660_PCLK>; + clock-names = "apb_pclk"; + + in-ports { + port { + etr_in: endpoint { + remote-endpoint = + <&replicator0_out0>; + }; + }; + }; + }; + + tpiu@ec032000 { + compatible = "arm,coresight-tpiu", "arm,primecell"; + reg = <0 0xec032000 0 0x1000>; + clocks = <&crg_ctrl HI3660_PCLK>; + clock-names = "apb_pclk"; + + in-ports { + port { + tpiu_in: endpoint { + remote-endpoint = + <&replicator0_out1>; + }; + }; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi index aa6a8ad31be2..253cc345f143 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi @@ -1154,3 +1154,5 @@ }; }; }; + +#include "hi3660-coresight.dtsi" diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi index 30f54b77c2f1..651771a73ed6 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi @@ -11,7 +11,7 @@ / { soc { funnel@f6401000 { - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0xf6401000 0 0x1000>; clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; clock-names = "apb_pclk"; @@ -61,7 +61,7 @@ }; replicator { - compatible = "arm,coresight-replicator"; + compatible = "arm,coresight-static-replicator"; clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; clock-names = "apb_pclk"; @@ -129,7 +129,7 @@ }; funnel@f6501000 { - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0xf6501000 0 0x1000>; clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; clock-names = "apb_pclk"; diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi index e4ceb3a73c81..36abc25320a8 100644 --- a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi +++ b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi @@ -249,6 +249,8 @@ #dma-cells = <1>; #dma-channels = <8>; #dma-requests = <32>; + resets = <&rst DMA_RESET>, <&rst DMA_OCP_RESET>; + reset-names = "dma", "dma-ocp"; }; rst: rstmgr@ffd11000 { diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile index caed4334f27d..243338c914a4 100644 --- a/arch/arm64/boot/dts/marvell/Makefile +++ b/arch/arm64/boot/dts/marvell/Makefile @@ -2,6 +2,7 @@ # Mvebu SoC Family dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin.dtb +dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-turris-mox.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-uDPU.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-7040-db.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-clearfog-gt-8k.dtb diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts index 6be019e1888e..fbcf03f86c96 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts @@ -95,25 +95,9 @@ flash@0 { reg = <0>; - compatible = "winbond,w25q32dw", "jedec,spi-flash"; + compatible = "jedec,spi-nor"; spi-max-frequency = <104000000>; m25p,fast-read; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "uboot"; - reg = <0 0x180000>; - }; - - partition@180000 { - label = "ubootenv"; - reg = <0x180000 0x10000>; - }; - }; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts new file mode 100644 index 000000000000..d105986c6be1 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts @@ -0,0 +1,840 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for CZ.NIC Turris Mox Board + * 2019 by Marek Behun <marek.behun@nic.cz> + */ + +/dts-v1/; + +#include <dt-bindings/bus/moxtet.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "armada-372x.dtsi" + +/ { + model = "CZ.NIC Turris Mox Board"; + compatible = "cznic,turris-mox", "marvell,armada3720", + "marvell,armada3710"; + + aliases { + spi0 = &spi0; + ethernet1 = ð1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000 0x20000000>; + }; + + leds { + compatible = "gpio-leds"; + red { + label = "mox:red:activity"; + gpios = <&gpiosb 21 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + linux,code = <KEY_RESTART>; + gpios = <&gpiosb 20 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + }; + + exp_usb3_vbus: usb3-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb3-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + gpio = <&gpiosb 0 GPIO_ACTIVE_HIGH>; + }; + + usb3_phy: usb3-phy { + compatible = "usb-nop-xceiv"; + vcc-supply = <&exp_usb3_vbus>; + }; + + vsdc_reg: vsdc-reg { + compatible = "regulator-gpio"; + regulator-name = "vsdc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + + gpios = <&gpiosb 23 GPIO_ACTIVE_HIGH>; + gpios-states = <0>; + states = <1800000 0x1 + 3300000 0x0>; + enable-active-high; + }; + + vsdio_reg: vsdio-reg { + compatible = "regulator-gpio"; + regulator-name = "vsdio"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + + gpios = <&gpiosb 22 GPIO_ACTIVE_HIGH>; + gpios-states = <0>; + states = <1800000 0x1 + 3300000 0x0>; + enable-active-high; + }; + + sdhci1_pwrseq: sdhci1-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpionb 19 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + + sfp: sfp { + compatible = "sff,sfp+"; + i2c-bus = <&i2c0>; + los-gpio = <&moxtet_sfp 0 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&moxtet_sfp 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&moxtet_sfp 2 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&moxtet_sfp 4 GPIO_ACTIVE_HIGH>; + rate-select0-gpio = <&moxtet_sfp 5 GPIO_ACTIVE_HIGH>; + + /* enabled by U-Boot if SFP module is present */ + status = "disabled"; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + clock-frequency = <100000>; + status = "okay"; + + rtc@6f { + compatible = "microchip,mcp7940x"; + reg = <0x6f>; + }; +}; + +&pcie_reset_pins { + function = "gpio"; +}; + +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>; + status = "okay"; + max-link-speed = <2>; + reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>; + phys = <&comphy1 0>; + + /* enabled by U-Boot if PCIe module is present */ + status = "disabled"; +}; + +&uart0 { + status = "okay"; +}; + +ð0 { + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + phy-mode = "rgmii-id"; + phy = <&phy1>; + status = "okay"; +}; + +ð1 { + phy-mode = "2500base-x"; + managed = "in-band-status"; + phys = <&comphy0 1>; +}; + +&sdhci0 { + wp-inverted; + bus-width = <4>; + cd-gpios = <&gpionb 10 GPIO_ACTIVE_HIGH>; + vqmmc-supply = <&vsdc_reg>; + marvell,pad-type = "sd"; + status = "okay"; +}; + +&sdhci1 { + pinctrl-names = "default"; + pinctrl-0 = <&sdio_pins>; + non-removable; + bus-width = <4>; + marvell,pad-type = "sd"; + vqmmc-supply = <&vsdio_reg>; + mmc-pwrseq = <&sdhci1_pwrseq>; + status = "okay"; +}; + +&spi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi_quad_pins &spi_cs1_pins>; + assigned-clocks = <&nb_periph_clk 7>; + assigned-clock-parents = <&tbg 1>; + assigned-clock-rates = <20000000>; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <20000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "secure-firmware"; + reg = <0x0 0x20000>; + }; + + partition@20000 { + label = "u-boot"; + reg = <0x20000 0x160000>; + }; + + partition@180000 { + label = "u-boot-env"; + reg = <0x180000 0x10000>; + }; + + partition@190000 { + label = "Rescue system"; + reg = <0x190000 0x660000>; + }; + + partition@7f0000 { + label = "dtb"; + reg = <0x7f0000 0x10000>; + }; + }; + }; + + moxtet: moxtet@1 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "cznic,moxtet"; + reg = <1>; + reset-gpios = <&gpiosb 2 GPIO_ACTIVE_LOW>; + spi-max-frequency = <10000000>; + spi-cpol; + spi-cpha; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gpiosb>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + status = "okay"; + + moxtet_sfp: gpio@0 { + compatible = "cznic,moxtet-gpio"; + gpio-controller; + #gpio-cells = <2>; + reg = <0>; + status = "disabled"; + }; + }; +}; + +&usb2 { + status = "okay"; +}; + +&usb3 { + status = "okay"; + phys = <&comphy2 0>; + usb-phy = <&usb3_phy>; +}; + +&mdio { + pinctrl-names = "default"; + pinctrl-0 = <&smi_pins>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + + /* switch nodes are enabled by U-Boot if modules are present */ + switch0@10 { + compatible = "marvell,mv88e6190"; + reg = <0x10 0>; + dsa,member = <0 0>; + interrupt-parent = <&moxtet>; + interrupts = <MOXTET_IRQ_PERIDOT(0)>; + status = "disabled"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch0phy1: switch0phy1@1 { + reg = <0x1>; + }; + + switch0phy2: switch0phy2@2 { + reg = <0x2>; + }; + + switch0phy3: switch0phy3@3 { + reg = <0x3>; + }; + + switch0phy4: switch0phy4@4 { + reg = <0x4>; + }; + + switch0phy5: switch0phy5@5 { + reg = <0x5>; + }; + + switch0phy6: switch0phy6@6 { + reg = <0x6>; + }; + + switch0phy7: switch0phy7@7 { + reg = <0x7>; + }; + + switch0phy8: switch0phy8@8 { + reg = <0x8>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <0x1>; + label = "lan1"; + phy-handle = <&switch0phy1>; + }; + + port@2 { + reg = <0x2>; + label = "lan2"; + phy-handle = <&switch0phy2>; + }; + + port@3 { + reg = <0x3>; + label = "lan3"; + phy-handle = <&switch0phy3>; + }; + + port@4 { + reg = <0x4>; + label = "lan4"; + phy-handle = <&switch0phy4>; + }; + + port@5 { + reg = <0x5>; + label = "lan5"; + phy-handle = <&switch0phy5>; + }; + + port@6 { + reg = <0x6>; + label = "lan6"; + phy-handle = <&switch0phy6>; + }; + + port@7 { + reg = <0x7>; + label = "lan7"; + phy-handle = <&switch0phy7>; + }; + + port@8 { + reg = <0x8>; + label = "lan8"; + phy-handle = <&switch0phy8>; + }; + + port@9 { + reg = <0x9>; + label = "cpu"; + ethernet = <ð1>; + phy-mode = "2500base-x"; + managed = "in-band-status"; + }; + + switch0port10: port@a { + reg = <0xa>; + label = "dsa"; + phy-mode = "2500base-x"; + managed = "in-band-status"; + link = <&switch1port9 &switch2port9>; + status = "disabled"; + }; + + port-sfp@a { + reg = <0xa>; + label = "sfp"; + sfp = <&sfp>; + phy-mode = "sgmii"; + managed = "in-band-status"; + status = "disabled"; + }; + }; + }; + + switch0@2 { + compatible = "marvell,mv88e6085"; + reg = <0x2 0>; + dsa,member = <0 0>; + interrupt-parent = <&moxtet>; + interrupts = <MOXTET_IRQ_TOPAZ>; + status = "disabled"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch0phy1_topaz: switch0phy1@11 { + reg = <0x11>; + }; + + switch0phy2_topaz: switch0phy2@12 { + reg = <0x12>; + }; + + switch0phy3_topaz: switch0phy3@13 { + reg = <0x13>; + }; + + switch0phy4_topaz: switch0phy4@14 { + reg = <0x14>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <0x1>; + label = "lan1"; + phy-handle = <&switch0phy1_topaz>; + }; + + port@2 { + reg = <0x2>; + label = "lan2"; + phy-handle = <&switch0phy2_topaz>; + }; + + port@3 { + reg = <0x3>; + label = "lan3"; + phy-handle = <&switch0phy3_topaz>; + }; + + port@4 { + reg = <0x4>; + label = "lan4"; + phy-handle = <&switch0phy4_topaz>; + }; + + port@5 { + reg = <0x5>; + label = "cpu"; + phy-mode = "2500base-x"; + managed = "in-band-status"; + ethernet = <ð1>; + }; + }; + }; + + switch1@11 { + compatible = "marvell,mv88e6190"; + reg = <0x11 0>; + dsa,member = <0 1>; + interrupt-parent = <&moxtet>; + interrupts = <MOXTET_IRQ_PERIDOT(1)>; + status = "disabled"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch1phy1: switch1phy1@1 { + reg = <0x1>; + }; + + switch1phy2: switch1phy2@2 { + reg = <0x2>; + }; + + switch1phy3: switch1phy3@3 { + reg = <0x3>; + }; + + switch1phy4: switch1phy4@4 { + reg = <0x4>; + }; + + switch1phy5: switch1phy5@5 { + reg = <0x5>; + }; + + switch1phy6: switch1phy6@6 { + reg = <0x6>; + }; + + switch1phy7: switch1phy7@7 { + reg = <0x7>; + }; + + switch1phy8: switch1phy8@8 { + reg = <0x8>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <0x1>; + label = "lan9"; + phy-handle = <&switch1phy1>; + }; + + port@2 { + reg = <0x2>; + label = "lan10"; + phy-handle = <&switch1phy2>; + }; + + port@3 { + reg = <0x3>; + label = "lan11"; + phy-handle = <&switch1phy3>; + }; + + port@4 { + reg = <0x4>; + label = "lan12"; + phy-handle = <&switch1phy4>; + }; + + port@5 { + reg = <0x5>; + label = "lan13"; + phy-handle = <&switch1phy5>; + }; + + port@6 { + reg = <0x6>; + label = "lan14"; + phy-handle = <&switch1phy6>; + }; + + port@7 { + reg = <0x7>; + label = "lan15"; + phy-handle = <&switch1phy7>; + }; + + port@8 { + reg = <0x8>; + label = "lan16"; + phy-handle = <&switch1phy8>; + }; + + switch1port9: port@9 { + reg = <0x9>; + label = "dsa"; + phy-mode = "2500base-x"; + managed = "in-band-status"; + link = <&switch0port10>; + }; + + switch1port10: port@a { + reg = <0xa>; + label = "dsa"; + phy-mode = "2500base-x"; + managed = "in-band-status"; + link = <&switch2port9>; + status = "disabled"; + }; + + port-sfp@a { + reg = <0xa>; + label = "sfp"; + sfp = <&sfp>; + phy-mode = "sgmii"; + managed = "in-band-status"; + status = "disabled"; + }; + }; + }; + + switch1@2 { + compatible = "marvell,mv88e6085"; + reg = <0x2 0>; + dsa,member = <0 1>; + interrupt-parent = <&moxtet>; + interrupts = <MOXTET_IRQ_TOPAZ>; + status = "disabled"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch1phy1_topaz: switch1phy1@11 { + reg = <0x11>; + }; + + switch1phy2_topaz: switch1phy2@12 { + reg = <0x12>; + }; + + switch1phy3_topaz: switch1phy3@13 { + reg = <0x13>; + }; + + switch1phy4_topaz: switch1phy4@14 { + reg = <0x14>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <0x1>; + label = "lan9"; + phy-handle = <&switch1phy1_topaz>; + }; + + port@2 { + reg = <0x2>; + label = "lan10"; + phy-handle = <&switch1phy2_topaz>; + }; + + port@3 { + reg = <0x3>; + label = "lan11"; + phy-handle = <&switch1phy3_topaz>; + }; + + port@4 { + reg = <0x4>; + label = "lan12"; + phy-handle = <&switch1phy4_topaz>; + }; + + port@5 { + reg = <0x5>; + label = "dsa"; + phy-mode = "2500base-x"; + managed = "in-band-status"; + link = <&switch0port10>; + }; + }; + }; + + switch2@12 { + compatible = "marvell,mv88e6190"; + reg = <0x12 0>; + dsa,member = <0 2>; + interrupt-parent = <&moxtet>; + interrupts = <MOXTET_IRQ_PERIDOT(2)>; + status = "disabled"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch2phy1: switch2phy1@1 { + reg = <0x1>; + }; + + switch2phy2: switch2phy2@2 { + reg = <0x2>; + }; + + switch2phy3: switch2phy3@3 { + reg = <0x3>; + }; + + switch2phy4: switch2phy4@4 { + reg = <0x4>; + }; + + switch2phy5: switch2phy5@5 { + reg = <0x5>; + }; + + switch2phy6: switch2phy6@6 { + reg = <0x6>; + }; + + switch2phy7: switch2phy7@7 { + reg = <0x7>; + }; + + switch2phy8: switch2phy8@8 { + reg = <0x8>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <0x1>; + label = "lan17"; + phy-handle = <&switch2phy1>; + }; + + port@2 { + reg = <0x2>; + label = "lan18"; + phy-handle = <&switch2phy2>; + }; + + port@3 { + reg = <0x3>; + label = "lan19"; + phy-handle = <&switch2phy3>; + }; + + port@4 { + reg = <0x4>; + label = "lan20"; + phy-handle = <&switch2phy4>; + }; + + port@5 { + reg = <0x5>; + label = "lan21"; + phy-handle = <&switch2phy5>; + }; + + port@6 { + reg = <0x6>; + label = "lan22"; + phy-handle = <&switch2phy6>; + }; + + port@7 { + reg = <0x7>; + label = "lan23"; + phy-handle = <&switch2phy7>; + }; + + port@8 { + reg = <0x8>; + label = "lan24"; + phy-handle = <&switch2phy8>; + }; + + switch2port9: port@9 { + reg = <0x9>; + label = "dsa"; + phy-mode = "2500base-x"; + managed = "in-band-status"; + link = <&switch1port10 &switch0port10>; + }; + + port-sfp@a { + reg = <0xa>; + label = "sfp"; + sfp = <&sfp>; + phy-mode = "sgmii"; + managed = "in-band-status"; + status = "disabled"; + }; + }; + }; + + switch2@2 { + compatible = "marvell,mv88e6085"; + reg = <0x2 0>; + dsa,member = <0 2>; + interrupt-parent = <&moxtet>; + interrupts = <MOXTET_IRQ_TOPAZ>; + status = "disabled"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch2phy1_topaz: switch2phy1@11 { + reg = <0x11>; + }; + + switch2phy2_topaz: switch2phy2@12 { + reg = <0x12>; + }; + + switch2phy3_topaz: switch2phy3@13 { + reg = <0x13>; + }; + + switch2phy4_topaz: switch2phy4@14 { + reg = <0x14>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <0x1>; + label = "lan17"; + phy-handle = <&switch2phy1_topaz>; + }; + + port@2 { + reg = <0x2>; + label = "lan18"; + phy-handle = <&switch2phy2_topaz>; + }; + + port@3 { + reg = <0x3>; + label = "lan19"; + phy-handle = <&switch2phy3_topaz>; + }; + + port@4 { + reg = <0x4>; + label = "lan20"; + phy-handle = <&switch2phy4_topaz>; + }; + + port@5 { + reg = <0x5>; + label = "dsa"; + phy-mode = "2500base-x"; + managed = "in-band-status"; + link = <&switch1port10 &switch0port10>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index f43c43168b00..000c135e39b7 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -215,6 +215,11 @@ function = "spi"; }; + spi_cs1_pins: spi-cs1-pins { + groups = "spi_cs1"; + function = "spi"; + }; + i2c1_pins: i2c1-pins { groups = "i2c1"; function = "i2c"; @@ -419,6 +424,13 @@ clocks = <&nb_periph_clk 15>; }; + rwtm: mailbox@b0000 { + compatible = "marvell,armada-3700-rwtm-mailbox"; + reg = <0xb0000 0x100>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + }; + sdhci1: sdhci@d0000 { compatible = "marvell,armada-3700-sdhci", "marvell,sdhci-xenon"; diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts index d20d84ce7ca8..a7eb4e7697a2 100644 --- a/arch/arm64/boot/dts/marvell/armada-7040-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts @@ -28,6 +28,32 @@ ethernet2 = &cp0_eth2; }; + cp0_exp_usb3_0_current_regulator: gpio-regulator { + compatible = "regulator-gpio"; + regulator-name = "cp0-usb3-0-current-regulator"; + regulator-type = "current"; + regulator-min-microamp = <500000>; + regulator-max-microamp = <900000>; + gpios = <&expander0 4 GPIO_ACTIVE_HIGH>; + states = <500000 0x0 + 900000 0x1>; + enable-active-high; + gpios-states = <0>; + }; + + cp0_exp_usb3_1_current_regulator: gpio-regulator { + compatible = "regulator-gpio"; + regulator-name = "cp0-usb3-1-current-regulator"; + regulator-type = "current"; + regulator-min-microamp = <500000>; + regulator-max-microamp = <900000>; + gpios = <&expander0 5 GPIO_ACTIVE_HIGH>; + states = <500000 0x0 + 900000 0x1>; + enable-active-high; + gpios-states = <0>; + }; + cp0_reg_usb3_0_vbus: cp0-usb3-0-vbus { compatible = "regulator-fixed"; regulator-name = "usb3h0-vbus"; @@ -35,6 +61,7 @@ regulator-max-microvolt = <5000000>; enable-active-high; gpio = <&expander0 0 GPIO_ACTIVE_HIGH>; + vin-supply = <&cp0_exp_usb3_0_current_regulator>; }; cp0_reg_usb3_1_vbus: cp0-usb3-1-vbus { @@ -44,16 +71,7 @@ regulator-max-microvolt = <5000000>; enable-active-high; gpio = <&expander0 1 GPIO_ACTIVE_HIGH>; - }; - - cp0_usb3_0_phy: cp0-usb3-0-phy { - compatible = "usb-nop-xceiv"; - vcc-supply = <&cp0_reg_usb3_0_vbus>; - }; - - cp0_usb3_1_phy: cp0-usb3-1-phy { - compatible = "usb-nop-xceiv"; - vcc-supply = <&cp0_reg_usb3_1_vbus>; + vin-supply = <&cp0_exp_usb3_1_current_regulator>; }; }; @@ -96,6 +114,8 @@ &cp0_pcie2 { status = "okay"; + phys = <&cp0_comphy5 2>; + phy-names = "cp0-pcie2-x1-phy"; }; &cp0_i2c0 { @@ -191,15 +211,36 @@ &cp0_sata0 { status = "okay"; + + sata-port@1 { + phys = <&cp0_comphy3 1>; + phy-names = "cp0-sata0-1-phy"; + }; +}; + +&cp0_comphy1 { + cp0_usbh0_con: connector { + compatible = "usb-a-connector"; + phy-supply = <&cp0_reg_usb3_0_vbus>; + }; }; &cp0_usb3_0 { - usb-phy = <&cp0_usb3_0_phy>; + phys = <&cp0_comphy1 0>; + phy-names = "cp0-usb3h0-comphy"; status = "okay"; }; +&cp0_comphy4 { + cp0_usbh1_con: connector { + compatible = "usb-a-connector"; + phy-supply = <&cp0_reg_usb3_1_vbus>; + }; +}; + &cp0_usb3_1 { - usb-phy = <&cp0_usb3_1_phy>; + phys = <&cp0_comphy4 1>; + phy-names = "cp0-usb3h1-comphy"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts index 9143aa13ceb1..bd881497b872 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts @@ -51,11 +51,6 @@ status = "okay"; }; - usb3h0_phy: usb3_phy0 { - compatible = "usb-nop-xceiv"; - vcc-supply = <&v_5v0_usb3_hst_vbus>; - }; - sfp_cp0_eth0: sfp-cp0-eth0 { compatible = "sff,sfp"; i2c-bus = <&cp0_i2c1>; @@ -63,6 +58,7 @@ tx-disable-gpio = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&cp0_sfp_present_pins &cp1_sfp_tx_disable_pins>; + maximum-power-milliwatt = <2000>; }; leds { @@ -242,6 +238,8 @@ pinctrl-names = "default"; pinctrl-0 = <&cp0_pci0_reset_pins &cp0_wlan_disable_pins>; reset-gpios = <&cp0_gpio2 0 GPIO_ACTIVE_LOW>; + phys = <&cp0_comphy0 0>; + phy-names = "cp0-pcie0-x1-phy"; status = "okay"; }; @@ -347,6 +345,11 @@ &cp1_sata0 { pinctrl-0 = <&cp0_pci1_reset_pins>; status = "okay"; + + sata-port@1 { + phys = <&cp1_comphy0 1>; + phy-names = "cp1-sata0-1-phy"; + }; }; &cp1_mdio { @@ -466,7 +469,15 @@ }; }; +&cp1_comphy2 { + cp1_usbh0_con: connector { + compatible = "usb-a-connector"; + phy-supply = <&v_5v0_usb3_hst_vbus>; + }; +}; + &cp1_usb3_0 { - usb-phy = <&usb3h0_phy>; + phys = <&cp1_comphy2 0>; + phy-names = "cp1-usb3h0-comphy"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts index 9f4f939ab65f..09fb5256f1db 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts @@ -27,6 +27,8 @@ ethernet1 = &cp0_eth2; ethernet2 = &cp1_eth0; ethernet3 = &cp1_eth1; + i2c1 = &cp0_i2c0; + i2c2 = &cp1_i2c0; }; cp0_reg_usb3_0_vbus: cp0-usb3-0-vbus { @@ -52,11 +54,6 @@ vcc-supply = <&cp0_reg_usb3_0_vbus>; }; - cp0_usb3_1_phy: cp0-usb3-1-phy { - compatible = "usb-nop-xceiv"; - vcc-supply = <&cp0_reg_usb3_1_vbus>; - }; - cp1_reg_usb3_0_vbus: cp1-usb3-0-vbus { compatible = "regulator-fixed"; regulator-name = "cp1-usb3h0-vbus"; @@ -72,11 +69,6 @@ }; }; -&i2c0 { - status = "okay"; - clock-frequency = <100000>; -}; - &spi0 { status = "okay"; @@ -111,11 +103,15 @@ /* CON6 on CP0 expansion */ &cp0_pcie0 { + phys = <&cp0_comphy0 0>; + phy-names = "cp0-pcie0-x1-phy"; status = "okay"; }; /* CON5 on CP0 expansion */ &cp0_pcie2 { + phys = <&cp0_comphy5 2>; + phy-names = "cp0-pcie2-x1-phy"; status = "okay"; }; @@ -146,6 +142,15 @@ /* CON4 on CP0 expansion */ &cp0_sata0 { status = "okay"; + + sata-port@0 { + phys = <&cp0_comphy1 0>; + phy-names = "cp0-sata0-0-phy"; + }; + sata-port@1 { + phys = <&cp0_comphy3 1>; + phy-names = "cp0-sata0-1-phy"; + }; }; /* CON9 on CP0 expansion */ @@ -154,9 +159,17 @@ status = "okay"; }; +&cp0_comphy4 { + cp0_usbh1_con: connector { + compatible = "usb-a-connector"; + phy-supply = <&cp0_reg_usb3_1_vbus>; + }; +}; + /* CON10 on CP0 expansion */ &cp0_usb3_1 { - usb-phy = <&cp0_usb3_1_phy>; + phys = <&cp0_comphy4 1>; + phy-names = "cp0-usb3h1-comphy"; status = "okay"; }; @@ -190,16 +203,22 @@ /* CON6 on CP1 expansion */ &cp1_pcie0 { + phys = <&cp1_comphy0 0>; + phy-names = "cp1-pcie0-x1-phy"; status = "okay"; }; /* CON7 on CP1 expansion */ &cp1_pcie1 { + phys = <&cp1_comphy4 1>; + phy-names = "cp1-pcie1-x1-phy"; status = "okay"; }; /* CON5 on CP1 expansion */ &cp1_pcie2 { + phys = <&cp1_comphy5 2>; + phy-names = "cp1-pcie2-x1-phy"; status = "okay"; }; @@ -276,6 +295,15 @@ /* CON4 on CP1 expansion */ &cp1_sata0 { status = "okay"; + + sata-port@0 { + phys = <&cp1_comphy1 0>; + phy-names = "cp1-sata0-0-phy"; + }; + sata-port@1 { + phys = <&cp1_comphy3 1>; + phy-names = "cp1-sata0-1-phy"; + }; }; /* CON9 on CP1 expansion */ diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi index 329f8ceeebea..d250f4b2bfed 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi @@ -61,11 +61,6 @@ status = "okay"; }; - usb3h0_phy: usb3_phy0 { - compatible = "usb-nop-xceiv"; - vcc-supply = <&v_5v0_usb3_hst_vbus>; - }; - sfp_eth0: sfp-eth0 { /* CON15,16 - CPM lane 4 */ compatible = "sff,sfp"; @@ -184,6 +179,12 @@ num-lanes = <4>; num-viewport = <8>; reset-gpios = <&cp0_gpio2 20 GPIO_ACTIVE_LOW>; + ranges = <0x81000000 0x0 0xf9010000 0x0 0xf9010000 0x0 0x10000 + 0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000>; + phys = <&cp0_comphy0 0>, <&cp0_comphy1 0>, + <&cp0_comphy2 0>, <&cp0_comphy3 0>; + phy-names = "cp0-pcie0-x4-lane0-phy", "cp0-pcie0-x4-lane1-phy", + "cp0-pcie0-x4-lane2-phy", "cp0-pcie0-x4-lane3-phy"; status = "okay"; }; @@ -237,8 +238,13 @@ }; &cp0_sata0 { - /* CPM Lane 0 - U29 */ status = "okay"; + + /* CPM Lane 5 - U29 */ + sata-port@1 { + phys = <&cp0_comphy5 1>; + phy-names = "cp0-sata0-1-phy"; + }; }; &cp0_sdhci0 { @@ -322,9 +328,19 @@ }; &cp1_sata0 { + status = "okay"; + /* CPS Lane 1 - U32 */ + sata-port@0 { + phys = <&cp1_comphy1 0>; + phy-names = "cp1-sata0-0-phy"; + }; + /* CPS Lane 3 - U31 */ - status = "okay"; + sata-port@1 { + phys = <&cp1_comphy3 1>; + phy-names = "cp1-sata0-1-phy"; + }; }; &cp1_spi1 { @@ -339,8 +355,16 @@ }; }; +&cp1_comphy2 { + cp1_usbh0_con: connector { + compatible = "usb-a-connector"; + phy-supply = <&v_5v0_usb3_hst_vbus>; + }; +}; + &cp1_usb3_0 { /* CPS Lane 2 - CON7 */ - usb-phy = <&usb3h0_phy>; + phys = <&cp1_comphy2 0>; + phy-names = "cp1-usb3h0-comphy"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi index 861fd21922c4..9024a2d9db07 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi @@ -20,12 +20,14 @@ compatible = "arm,cortex-a72"; reg = <0x000>; enable-method = "psci"; + #cooling-cells = <2>; }; cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a72"; reg = <0x001>; enable-method = "psci"; + #cooling-cells = <2>; }; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi index 2baafe12ebd4..c25bc65727b5 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi @@ -20,24 +20,32 @@ compatible = "arm,cortex-a72"; reg = <0x000>; enable-method = "psci"; + #cooling-cells = <2>; + clocks = <&cpu_clk 0>; }; cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a72"; reg = <0x001>; enable-method = "psci"; + #cooling-cells = <2>; + clocks = <&cpu_clk 0>; }; cpu2: cpu@100 { device_type = "cpu"; compatible = "arm,cortex-a72"; reg = <0x100>; enable-method = "psci"; + #cooling-cells = <2>; + clocks = <&cpu_clk 1>; }; cpu3: cpu@101 { device_type = "cpu"; compatible = "arm,cortex-a72"; reg = <0x101>; enable-method = "psci"; + #cooling-cells = <2>; + clocks = <&cpu_clk 1>; }; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi index 91dad7e4ee59..d06dd198f2c7 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi @@ -280,6 +280,13 @@ #address-cells = <1>; #size-cells = <1>; + cpu_clk: clock-cpu@278 { + compatible = "marvell,ap806-cpu-clock"; + clocks = <&ap_clk 0>, <&ap_clk 1>; + #clock-cells = <1>; + reg = <0x278 0xa30>; + }; + ap_thermal: thermal-sensor@80 { compatible = "marvell,armada-ap806-thermal"; reg = <0x80 0x10>; @@ -297,8 +304,6 @@ * * Only one thermal zone per AP/CP may trigger interrupts at a time, the * first one that will have a critical trip point will be chosen. - * - * The cooling maps are always empty as there are no cooling devices. */ thermal-zones { ap_thermal_ic: ap-thermal-ic { @@ -318,44 +323,136 @@ cooling-maps { }; }; - ap_thermal_cpu1: ap-thermal-cpu1 { + ap_thermal_cpu0: ap-thermal-cpu0 { polling-delay-passive = <1000>; polling-delay = <1000>; thermal-sensors = <&ap_thermal 1>; - trips { }; - cooling-maps { }; + trips { + cpu0_hot: cpu0-hot { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu0_emerg: cpu0-emerg { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + }; + + cooling-maps { + map0_hot: map0-hot { + trip = <&cpu0_hot>; + cooling-device = <&cpu0 1 2>, + <&cpu1 1 2>; + }; + map0_emerg: map0-ermerg { + trip = <&cpu0_emerg>; + cooling-device = <&cpu0 3 3>, + <&cpu1 3 3>; + }; + }; }; - ap_thermal_cpu2: ap-thermal-cpu2 { + ap_thermal_cpu1: ap-thermal-cpu1 { polling-delay-passive = <1000>; polling-delay = <1000>; thermal-sensors = <&ap_thermal 2>; - trips { }; - cooling-maps { }; + trips { + cpu1_hot: cpu1-hot { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu1_emerg: cpu1-emerg { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + }; + + cooling-maps { + map1_hot: map1-hot { + trip = <&cpu1_hot>; + cooling-device = <&cpu0 1 2>, + <&cpu1 1 2>; + }; + map1_emerg: map1-emerg { + trip = <&cpu1_emerg>; + cooling-device = <&cpu0 3 3>, + <&cpu1 3 3>; + }; + }; }; - ap_thermal_cpu3: ap-thermal-cpu3 { + ap_thermal_cpu2: ap-thermal-cpu2 { polling-delay-passive = <1000>; polling-delay = <1000>; thermal-sensors = <&ap_thermal 3>; - trips { }; - cooling-maps { }; + trips { + cpu2_hot: cpu2-hot { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu2_emerg: cpu2-emerg { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + }; + + cooling-maps { + map2_hot: map2-hot { + trip = <&cpu2_hot>; + cooling-device = <&cpu2 1 2>, + <&cpu3 1 2>; + }; + map2_emerg: map2-emerg { + trip = <&cpu2_emerg>; + cooling-device = <&cpu2 3 3>, + <&cpu3 3 3>; + }; + }; }; - ap_thermal_cpu4: ap-thermal-cpu4 { + ap_thermal_cpu3: ap-thermal-cpu3 { polling-delay-passive = <1000>; polling-delay = <1000>; thermal-sensors = <&ap_thermal 4>; - trips { }; - cooling-maps { }; + trips { + cpu3_hot: cpu3-hot { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu3_emerg: cpu3-emerg { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + }; + + cooling-maps { + map3_hot: map3-bhot { + trip = <&cpu3_hot>; + cooling-device = <&cpu2 1 2>, + <&cpu3 1 2>; + }; + map3_emerg: map3-emerg { + trip = <&cpu3_emerg>; + cooling-device = <&cpu2 3 3>, + <&cpu3 3 3>; + }; + }; }; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi index 4d6e4a097f72..d81944902650 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi @@ -133,6 +133,9 @@ compatible = "marvell,comphy-cp110"; reg = <0x120000 0x6000>; marvell,system-controller = <&CP110_LABEL(syscon0)>; + clocks = <&CP110_LABEL(clk) 1 5>, <&CP110_LABEL(clk) 1 6>, + <&CP110_LABEL(clk) 1 18>; + clock-names = "mg_clk", "mg_core_clk", "axi_clk"; #address-cells = <1>; #size-cells = <0>; @@ -238,6 +241,7 @@ <85 IRQ_TYPE_LEVEL_HIGH>, <84 IRQ_TYPE_LEVEL_HIGH>, <83 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; status = "disabled"; }; @@ -253,6 +257,7 @@ <81 IRQ_TYPE_LEVEL_HIGH>, <80 IRQ_TYPE_LEVEL_HIGH>, <79 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; status = "disabled"; }; }; @@ -304,7 +309,17 @@ interrupts = <107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&CP110_LABEL(clk) 1 15>, <&CP110_LABEL(clk) 1 16>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; + + sata-port@0 { + reg = <0>; + }; + + sata-port@1 { + reg = <1>; + }; }; CP110_LABEL(xor0): xor@6a0000 { diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile index e8f952fb279b..458bbc422a94 100644 --- a/arch/arm64/boot/dts/mediatek/Makefile +++ b/arch/arm64/boot/dts/mediatek/Makefile @@ -7,3 +7,4 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-evb.dtb diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts index 710c5c3d87d3..83e10591e0e5 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts +++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts @@ -115,24 +115,34 @@ }; ð { - pinctrl-names = "default"; - pinctrl-0 = <ð_pins>; status = "okay"; + gmac0: mac@0 { + compatible = "mediatek,eth-mac"; + reg = <0>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; gmac1: mac@1 { compatible = "mediatek,eth-mac"; reg = <1>; - phy-handle = <&phy5>; + phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; }; - mdio-bus { + mdio: mdio-bus { #address-cells = <1>; #size-cells = <0>; - - phy5: ethernet-phy@5 { - reg = <5>; - phy-mode = "sgmii"; - }; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi index 4b1f5ae710eb..dac51e98204c 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi @@ -929,7 +929,7 @@ sgmiisys: sgmiisys@1b128000 { compatible = "mediatek,mt7622-sgmiisys", "syscon"; - reg = <0 0x1b128000 0 0x1000>; + reg = <0 0x1b128000 0 0x3000>; #clock-cells = <1>; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts new file mode 100644 index 000000000000..1fb195c683c3 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts @@ -0,0 +1,236 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (c) 2018 MediaTek Inc. + * Author: Ben Ho <ben.ho@mediatek.com> + * Erin Lo <erin.lo@mediatek.com> + */ + +/dts-v1/; +#include "mt8183.dtsi" + +/ { + model = "MediaTek MT8183 evaluation board"; + compatible = "mediatek,mt8183-evb", "mediatek,mt8183"; + + aliases { + serial0 = &uart0; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x80000000>; + }; + + chosen { + stdout-path = "serial0:921600n8"; + }; +}; + +&auxadc { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c_pins_0>; + status = "okay"; + clock-frequency = <100000>; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c_pins_1>; + status = "okay"; + clock-frequency = <100000>; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c_pins_2>; + status = "okay"; + clock-frequency = <100000>; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c_pins_3>; + status = "okay"; + clock-frequency = <100000>; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c_pins_4>; + status = "okay"; + clock-frequency = <1000000>; +}; + +&i2c5 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c_pins_5>; + status = "okay"; + clock-frequency = <1000000>; +}; + +&pio { + i2c_pins_0: i2c0{ + pins_i2c{ + pinmux = <PINMUX_GPIO82__FUNC_SDA0>, + <PINMUX_GPIO83__FUNC_SCL0>; + mediatek,pull-up-adv = <3>; + mediatek,drive-strength-adv = <00>; + }; + }; + + i2c_pins_1: i2c1{ + pins_i2c{ + pinmux = <PINMUX_GPIO81__FUNC_SDA1>, + <PINMUX_GPIO84__FUNC_SCL1>; + mediatek,pull-up-adv = <3>; + mediatek,drive-strength-adv = <00>; + }; + }; + + i2c_pins_2: i2c2{ + pins_i2c{ + pinmux = <PINMUX_GPIO103__FUNC_SCL2>, + <PINMUX_GPIO104__FUNC_SDA2>; + mediatek,pull-up-adv = <3>; + mediatek,drive-strength-adv = <00>; + }; + }; + + i2c_pins_3: i2c3{ + pins_i2c{ + pinmux = <PINMUX_GPIO50__FUNC_SCL3>, + <PINMUX_GPIO51__FUNC_SDA3>; + mediatek,pull-up-adv = <3>; + mediatek,drive-strength-adv = <00>; + }; + }; + + i2c_pins_4: i2c4{ + pins_i2c{ + pinmux = <PINMUX_GPIO105__FUNC_SCL4>, + <PINMUX_GPIO106__FUNC_SDA4>; + mediatek,pull-up-adv = <3>; + mediatek,drive-strength-adv = <00>; + }; + }; + + i2c_pins_5: i2c5{ + pins_i2c{ + pinmux = <PINMUX_GPIO48__FUNC_SCL5>, + <PINMUX_GPIO49__FUNC_SDA5>; + mediatek,pull-up-adv = <3>; + mediatek,drive-strength-adv = <00>; + }; + }; + + spi_pins_0: spi0{ + pins_spi{ + pinmux = <PINMUX_GPIO85__FUNC_SPI0_MI>, + <PINMUX_GPIO86__FUNC_SPI0_CSB>, + <PINMUX_GPIO87__FUNC_SPI0_MO>, + <PINMUX_GPIO88__FUNC_SPI0_CLK>; + bias-disable; + }; + }; + + spi_pins_1: spi1{ + pins_spi{ + pinmux = <PINMUX_GPIO161__FUNC_SPI1_A_MI>, + <PINMUX_GPIO162__FUNC_SPI1_A_CSB>, + <PINMUX_GPIO163__FUNC_SPI1_A_MO>, + <PINMUX_GPIO164__FUNC_SPI1_A_CLK>; + bias-disable; + }; + }; + + spi_pins_2: spi2{ + pins_spi{ + pinmux = <PINMUX_GPIO0__FUNC_SPI2_CSB>, + <PINMUX_GPIO1__FUNC_SPI2_MO>, + <PINMUX_GPIO2__FUNC_SPI2_CLK>, + <PINMUX_GPIO94__FUNC_SPI2_MI>; + bias-disable; + }; + }; + + spi_pins_3: spi3{ + pins_spi{ + pinmux = <PINMUX_GPIO21__FUNC_SPI3_MI>, + <PINMUX_GPIO22__FUNC_SPI3_CSB>, + <PINMUX_GPIO23__FUNC_SPI3_MO>, + <PINMUX_GPIO24__FUNC_SPI3_CLK>; + bias-disable; + }; + }; + + spi_pins_4: spi4{ + pins_spi{ + pinmux = <PINMUX_GPIO17__FUNC_SPI4_MI>, + <PINMUX_GPIO18__FUNC_SPI4_CSB>, + <PINMUX_GPIO19__FUNC_SPI4_MO>, + <PINMUX_GPIO20__FUNC_SPI4_CLK>; + bias-disable; + }; + }; + + spi_pins_5: spi5{ + pins_spi{ + pinmux = <PINMUX_GPIO13__FUNC_SPI5_MI>, + <PINMUX_GPIO14__FUNC_SPI5_CSB>, + <PINMUX_GPIO15__FUNC_SPI5_MO>, + <PINMUX_GPIO16__FUNC_SPI5_CLK>; + bias-disable; + }; + }; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi_pins_0>; + mediatek,pad-select = <0>; + status = "okay"; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi_pins_1>; + mediatek,pad-select = <0>; + status = "okay"; +}; + +&spi2 { + pinctrl-names = "default"; + pinctrl-0 = <&spi_pins_2>; + mediatek,pad-select = <0>; + status = "okay"; +}; + +&spi3 { + pinctrl-names = "default"; + pinctrl-0 = <&spi_pins_3>; + mediatek,pad-select = <0>; + status = "okay"; +}; + +&spi4 { + pinctrl-names = "default"; + pinctrl-0 = <&spi_pins_4>; + mediatek,pad-select = <0>; + status = "okay"; +}; + +&spi5 { + pinctrl-names = "default"; + pinctrl-0 = <&spi_pins_5>; + mediatek,pad-select = <0>; + status = "okay"; + +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi new file mode 100644 index 000000000000..97f84aa9fc6e --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi @@ -0,0 +1,636 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (c) 2018 MediaTek Inc. + * Author: Ben Ho <ben.ho@mediatek.com> + * Erin Lo <erin.lo@mediatek.com> + */ + +#include <dt-bindings/clock/mt8183-clk.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "mt8183-pinfunc.h" + +/ { + compatible = "mediatek,mt8183"; + interrupt-parent = <&sysirq>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c7; + i2c8 = &i2c8; + i2c9 = &i2c9; + i2c10 = &i2c10; + i2c11 = &i2c11; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + core1 { + cpu = <&cpu1>; + }; + core2 { + cpu = <&cpu2>; + }; + core3 { + cpu = <&cpu3>; + }; + }; + + cluster1 { + core0 { + cpu = <&cpu4>; + }; + core1 { + cpu = <&cpu5>; + }; + core2 { + cpu = <&cpu6>; + }; + core3 { + cpu = <&cpu7>; + }; + }; + }; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x000>; + enable-method = "psci"; + capacity-dmips-mhz = <741>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x001>; + enable-method = "psci"; + capacity-dmips-mhz = <741>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x002>; + enable-method = "psci"; + capacity-dmips-mhz = <741>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x003>; + enable-method = "psci"; + capacity-dmips-mhz = <741>; + }; + + cpu4: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x100>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + }; + + cpu5: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x101>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + }; + + cpu6: cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x102>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + }; + + cpu7: cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x103>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + }; + }; + + pmu-a53 { + compatible = "arm,cortex-a53-pmu"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster0>; + }; + + pmu-a73 { + compatible = "arm,cortex-a73-pmu"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster1>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + clk26m: oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + clock-output-names = "clk26m"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW 0>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW 0>; + }; + + soc { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + ranges; + + soc_data: soc_data@8000000 { + compatible = "mediatek,mt8183-efuse", + "mediatek,efuse"; + reg = <0 0x08000000 0 0x0010>; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + }; + + gic: interrupt-controller@c000000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <4>; + interrupt-parent = <&gic>; + interrupt-controller; + reg = <0 0x0c000000 0 0x40000>, /* GICD */ + <0 0x0c100000 0 0x200000>, /* GICR */ + <0 0x0c400000 0 0x2000>, /* GICC */ + <0 0x0c410000 0 0x1000>, /* GICH */ + <0 0x0c420000 0 0x2000>; /* GICV */ + + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>; + ppi-partitions { + ppi_cluster0: interrupt-partition-0 { + affinity = <&cpu0 &cpu1 &cpu2 &cpu3>; + }; + ppi_cluster1: interrupt-partition-1 { + affinity = <&cpu4 &cpu5 &cpu6 &cpu7>; + }; + }; + }; + + mcucfg: syscon@c530000 { + compatible = "mediatek,mt8183-mcucfg", "syscon"; + reg = <0 0x0c530000 0 0x1000>; + #clock-cells = <1>; + }; + + sysirq: interrupt-controller@c530a80 { + compatible = "mediatek,mt8183-sysirq", + "mediatek,mt6577-sysirq"; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + reg = <0 0x0c530a80 0 0x50>; + }; + + topckgen: syscon@10000000 { + compatible = "mediatek,mt8183-topckgen", "syscon"; + reg = <0 0x10000000 0 0x1000>; + #clock-cells = <1>; + }; + + infracfg: syscon@10001000 { + compatible = "mediatek,mt8183-infracfg", "syscon"; + reg = <0 0x10001000 0 0x1000>; + #clock-cells = <1>; + }; + + pio: pinctrl@10005000 { + compatible = "mediatek,mt8183-pinctrl"; + reg = <0 0x10005000 0 0x1000>, + <0 0x11f20000 0 0x1000>, + <0 0x11e80000 0 0x1000>, + <0 0x11e70000 0 0x1000>, + <0 0x11e90000 0 0x1000>, + <0 0x11d30000 0 0x1000>, + <0 0x11d20000 0 0x1000>, + <0 0x11c50000 0 0x1000>, + <0 0x11f30000 0 0x1000>, + <0 0x1000b000 0 0x1000>; + reg-names = "iocfg0", "iocfg1", "iocfg2", + "iocfg3", "iocfg4", "iocfg5", + "iocfg6", "iocfg7", "iocfg8", + "eint"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pio 0 0 192>; + interrupt-controller; + interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; + }; + + apmixedsys: syscon@1000c000 { + compatible = "mediatek,mt8183-apmixedsys", "syscon"; + reg = <0 0x1000c000 0 0x1000>; + #clock-cells = <1>; + }; + + pwrap: pwrap@1000d000 { + compatible = "mediatek,mt8183-pwrap"; + reg = <0 0x1000d000 0 0x1000>; + reg-names = "pwrap"; + interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&topckgen CLK_TOP_MUX_PMICSPI>, + <&infracfg CLK_INFRA_PMIC_AP>; + clock-names = "spi", "wrap"; + }; + + auxadc: auxadc@11001000 { + compatible = "mediatek,mt8183-auxadc", + "mediatek,mt8173-auxadc"; + reg = <0 0x11001000 0 0x1000>; + clocks = <&infracfg CLK_INFRA_AUXADC>; + clock-names = "main"; + #io-channel-cells = <1>; + status = "disabled"; + }; + + uart0: serial@11002000 { + compatible = "mediatek,mt8183-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11002000 0 0x1000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk26m>, <&infracfg CLK_INFRA_UART0>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + uart1: serial@11003000 { + compatible = "mediatek,mt8183-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11003000 0 0x1000>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk26m>, <&infracfg CLK_INFRA_UART1>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + uart2: serial@11004000 { + compatible = "mediatek,mt8183-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11004000 0 0x1000>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk26m>, <&infracfg CLK_INFRA_UART2>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + i2c6: i2c@11005000 { + compatible = "mediatek,mt8183-i2c"; + reg = <0 0x11005000 0 0x1000>, + <0 0x11000600 0 0x80>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_I2C6>, + <&infracfg CLK_INFRA_AP_DMA>; + clock-names = "main", "dma"; + clock-div = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c0: i2c@11007000 { + compatible = "mediatek,mt8183-i2c"; + reg = <0 0x11007000 0 0x1000>, + <0 0x11000080 0 0x80>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_I2C0>, + <&infracfg CLK_INFRA_AP_DMA>; + clock-names = "main", "dma"; + clock-div = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@11008000 { + compatible = "mediatek,mt8183-i2c"; + reg = <0 0x11008000 0 0x1000>, + <0 0x11000100 0 0x80>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_I2C1>, + <&infracfg CLK_INFRA_AP_DMA>, + <&infracfg CLK_INFRA_I2C1_ARBITER>; + clock-names = "main", "dma","arb"; + clock-div = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@11009000 { + compatible = "mediatek,mt8183-i2c"; + reg = <0 0x11009000 0 0x1000>, + <0 0x11000280 0 0x80>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_I2C2>, + <&infracfg CLK_INFRA_AP_DMA>, + <&infracfg CLK_INFRA_I2C2_ARBITER>; + clock-names = "main", "dma", "arb"; + clock-div = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi0: spi@1100a000 { + compatible = "mediatek,mt8183-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x1100a000 0 0x1000>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_SYSPLL_D5_D2>, + <&topckgen CLK_TOP_MUX_SPI>, + <&infracfg CLK_INFRA_SPI0>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + i2c3: i2c@1100f000 { + compatible = "mediatek,mt8183-i2c"; + reg = <0 0x1100f000 0 0x1000>, + <0 0x11000400 0 0x80>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_I2C3>, + <&infracfg CLK_INFRA_AP_DMA>; + clock-names = "main", "dma"; + clock-div = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@11010000 { + compatible = "mediatek,mt8183-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11010000 0 0x1000>; + interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_SYSPLL_D5_D2>, + <&topckgen CLK_TOP_MUX_SPI>, + <&infracfg CLK_INFRA_SPI1>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + i2c1: i2c@11011000 { + compatible = "mediatek,mt8183-i2c"; + reg = <0 0x11011000 0 0x1000>, + <0 0x11000480 0 0x80>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_I2C4>, + <&infracfg CLK_INFRA_AP_DMA>; + clock-names = "main", "dma"; + clock-div = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi2: spi@11012000 { + compatible = "mediatek,mt8183-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11012000 0 0x1000>; + interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_SYSPLL_D5_D2>, + <&topckgen CLK_TOP_MUX_SPI>, + <&infracfg CLK_INFRA_SPI2>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi3: spi@11013000 { + compatible = "mediatek,mt8183-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11013000 0 0x1000>; + interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_SYSPLL_D5_D2>, + <&topckgen CLK_TOP_MUX_SPI>, + <&infracfg CLK_INFRA_SPI3>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + i2c9: i2c@11014000 { + compatible = "mediatek,mt8183-i2c"; + reg = <0 0x11014000 0 0x1000>, + <0 0x11000180 0 0x80>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_I2C1_IMM>, + <&infracfg CLK_INFRA_AP_DMA>, + <&infracfg CLK_INFRA_I2C1_ARBITER>; + clock-names = "main", "dma", "arb"; + clock-div = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c10: i2c@11015000 { + compatible = "mediatek,mt8183-i2c"; + reg = <0 0x11015000 0 0x1000>, + <0 0x11000300 0 0x80>; + interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_I2C2_IMM>, + <&infracfg CLK_INFRA_AP_DMA>, + <&infracfg CLK_INFRA_I2C2_ARBITER>; + clock-names = "main", "dma", "arb"; + clock-div = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@11016000 { + compatible = "mediatek,mt8183-i2c"; + reg = <0 0x11016000 0 0x1000>, + <0 0x11000500 0 0x80>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_I2C5>, + <&infracfg CLK_INFRA_AP_DMA>, + <&infracfg CLK_INFRA_I2C5_ARBITER>; + clock-names = "main", "dma", "arb"; + clock-div = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c11: i2c@11017000 { + compatible = "mediatek,mt8183-i2c"; + reg = <0 0x11017000 0 0x1000>, + <0 0x11000580 0 0x80>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_I2C5_IMM>, + <&infracfg CLK_INFRA_AP_DMA>, + <&infracfg CLK_INFRA_I2C5_ARBITER>; + clock-names = "main", "dma", "arb"; + clock-div = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi4: spi@11018000 { + compatible = "mediatek,mt8183-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11018000 0 0x1000>; + interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_SYSPLL_D5_D2>, + <&topckgen CLK_TOP_MUX_SPI>, + <&infracfg CLK_INFRA_SPI4>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi5: spi@11019000 { + compatible = "mediatek,mt8183-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11019000 0 0x1000>; + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_SYSPLL_D5_D2>, + <&topckgen CLK_TOP_MUX_SPI>, + <&infracfg CLK_INFRA_SPI5>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + i2c7: i2c@1101a000 { + compatible = "mediatek,mt8183-i2c"; + reg = <0 0x1101a000 0 0x1000>, + <0 0x11000680 0 0x80>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_I2C7>, + <&infracfg CLK_INFRA_AP_DMA>; + clock-names = "main", "dma"; + clock-div = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c8: i2c@1101b000 { + compatible = "mediatek,mt8183-i2c"; + reg = <0 0x1101b000 0 0x1000>, + <0 0x11000700 0 0x80>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_I2C8>, + <&infracfg CLK_INFRA_AP_DMA>; + clock-names = "main", "dma"; + clock-div = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + audiosys: syscon@11220000 { + compatible = "mediatek,mt8183-audiosys", "syscon"; + reg = <0 0x11220000 0 0x1000>; + #clock-cells = <1>; + }; + + efuse: efuse@11f10000 { + compatible = "mediatek,mt8183-efuse", + "mediatek,efuse"; + reg = <0 0x11f10000 0 0x1000>; + }; + + mfgcfg: syscon@13000000 { + compatible = "mediatek,mt8183-mfgcfg", "syscon"; + reg = <0 0x13000000 0 0x1000>; + #clock-cells = <1>; + }; + + mmsys: syscon@14000000 { + compatible = "mediatek,mt8183-mmsys", "syscon"; + reg = <0 0x14000000 0 0x1000>; + #clock-cells = <1>; + }; + + imgsys: syscon@15020000 { + compatible = "mediatek,mt8183-imgsys", "syscon"; + reg = <0 0x15020000 0 0x1000>; + #clock-cells = <1>; + }; + + vdecsys: syscon@16000000 { + compatible = "mediatek,mt8183-vdecsys", "syscon"; + reg = <0 0x16000000 0 0x1000>; + #clock-cells = <1>; + }; + + vencsys: syscon@17000000 { + compatible = "mediatek,mt8183-vencsys", "syscon"; + reg = <0 0x17000000 0 0x1000>; + #clock-cells = <1>; + }; + + ipu_conn: syscon@19000000 { + compatible = "mediatek,mt8183-ipu_conn", "syscon"; + reg = <0 0x19000000 0 0x1000>; + #clock-cells = <1>; + }; + + ipu_adl: syscon@19010000 { + compatible = "mediatek,mt8183-ipu_adl", "syscon"; + reg = <0 0x19010000 0 0x1000>; + #clock-cells = <1>; + }; + + ipu_core0: syscon@19180000 { + compatible = "mediatek,mt8183-ipu_core0", "syscon"; + reg = <0 0x19180000 0 0x1000>; + #clock-cells = <1>; + }; + + ipu_core1: syscon@19280000 { + compatible = "mediatek,mt8183-ipu_core1", "syscon"; + reg = <0 0x19280000 0 0x1000>; + #clock-cells = <1>; + }; + + camsys: syscon@1a000000 { + compatible = "mediatek,mt8183-camsys", "syscon"; + reg = <0 0x1a000000 0 0x1000>; + #clock-cells = <1>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts index 14d7fea82daf..bdace01561ba 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts @@ -7,18 +7,70 @@ #include "tegra186-p3310.dtsi" / { - model = "NVIDIA Tegra186 P2771-0000 Development Board"; + model = "NVIDIA Jetson TX2 Developer Kit"; compatible = "nvidia,p2771-0000", "nvidia,tegra186"; + aconnect { + status = "okay"; + + dma-controller@2930000 { + status = "okay"; + }; + + interrupt-controller@2a40000 { + status = "okay"; + }; + }; + i2c@3160000 { power-monitor@42 { compatible = "ti,ina3221"; reg = <0x42>; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0x0>; + label = "VDD_MUX"; + shunt-resistor-micro-ohms = <20000>; + }; + + channel@1 { + reg = <0x1>; + label = "VDD_5V0_IO_SYS"; + shunt-resistor-micro-ohms = <5000>; + }; + + channel@2 { + reg = <0x2>; + label = "VDD_3V3_SYS"; + shunt-resistor-micro-ohms = <10000>; + }; }; power-monitor@43 { compatible = "ti,ina3221"; reg = <0x43>; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0x0>; + label = "VDD_3V3_IO_SLP"; + shunt-resistor-micro-ohms = <10000>; + }; + + channel@1 { + reg = <0x1>; + label = "VDD_1V8_IO"; + shunt-resistor-micro-ohms = <10000>; + }; + + channel@2 { + reg = <0x2>; + label = "VDD_M2_IN"; + shunt-resistor-micro-ohms = <10000>; + }; }; exp1: gpio@74 { @@ -31,6 +83,8 @@ #gpio-cells = <2>; gpio-controller; + + vcc-supply = <&vdd_3v3_sys>; }; exp2: gpio@77 { @@ -43,6 +97,8 @@ #gpio-cells = <2>; gpio-controller; + + vcc-supply = <&vdd_1v8>; }; }; @@ -145,6 +201,19 @@ phy-names = "usb2-0", "usb2-1", "usb3-0"; }; + i2c@c250000 { + /* carrier board ID EEPROM */ + eeprom@57 { + compatible = "atmel,24c02"; + reg = <0x57>; + + address-bits = <8>; + page-size = <8>; + size = <256>; + read-only; + }; + }; + pcie@10003000 { status = "okay"; @@ -278,7 +347,7 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio TEGRA_MAIN_GPIO(L, 4) GPIO_ACTIVE_HIGH>; + gpio = <&gpio TEGRA186_MAIN_GPIO(L, 4) GPIO_ACTIVE_HIGH>; enable-active-high; vin-supply = <&vdd_5v0_sys>; @@ -292,7 +361,7 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio TEGRA_MAIN_GPIO(L, 5) GPIO_ACTIVE_HIGH>; + gpio = <&gpio TEGRA186_MAIN_GPIO(L, 5) GPIO_ACTIVE_HIGH>; enable-active-high; vin-supply = <&vdd_5v0_sys>; diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi index 64686b033c38..5e18acf5cfad 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi @@ -4,7 +4,7 @@ #include <dt-bindings/mfd/max77620.h> / { - model = "NVIDIA Tegra186 P3310 Processor Module"; + model = "NVIDIA Jetson TX2"; compatible = "nvidia,p3310", "nvidia,tegra186"; aliases { @@ -67,11 +67,51 @@ power-monitor@40 { compatible = "ti,ina3221"; reg = <0x40>; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0x0>; + label = "VDD_SYS_GPU"; + shunt-resistor-micro-ohms = <10000>; + }; + + channel@1 { + reg = <0x1>; + label = "VDD_SYS_SOC"; + shunt-resistor-micro-ohms = <10000>; + }; + + channel@2 { + reg = <0x2>; + label = "VDD_3V8_WIFI"; + shunt-resistor-micro-ohms = <10000>; + }; }; power-monitor@41 { compatible = "ti,ina3221"; reg = <0x41>; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0x0>; + label = "VDD_IN"; + shunt-resistor-micro-ohms = <5000>; + }; + + channel@1 { + reg = <0x1>; + label = "VDD_SYS_CPU"; + shunt-resistor-micro-ohms = <10000>; + }; + + channel@2 { + reg = <0x2>; + label = "VDD_5V0_DDR"; + shunt-resistor-micro-ohms = <10000>; + }; }; }; @@ -124,6 +164,17 @@ i2c@c250000 { status = "okay"; + + /* module ID EEPROM */ + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + + address-bits = <8>; + page-size = <8>; + size = <256>; + read-only; + }; }; rtc@c2a0000 { diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi index 426ac0bdf6a6..47cd831fcf44 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi @@ -70,6 +70,75 @@ snps,rxpbl = <8>; }; + aconnect { + compatible = "nvidia,tegra186-aconnect", + "nvidia,tegra210-aconnect"; + clocks = <&bpmp TEGRA186_CLK_APE>, + <&bpmp TEGRA186_CLK_APB2APE>; + clock-names = "ape", "apb2ape"; + power-domains = <&bpmp TEGRA186_POWER_DOMAIN_AUD>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x02900000 0x0 0x02900000 0x200000>; + status = "disabled"; + + dma-controller@2930000 { + compatible = "nvidia,tegra186-adma"; + reg = <0x02930000 0x20000>; + interrupt-parent = <&agic>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + clocks = <&bpmp TEGRA186_CLK_AHUB>; + clock-names = "d_audio"; + status = "disabled"; + }; + + agic: interrupt-controller@2a40000 { + compatible = "nvidia,tegra186-agic", + "nvidia,tegra210-agic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x02a41000 0x1000>, + <0x02a42000 0x2000>; + interrupts = <GIC_SPI 145 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&bpmp TEGRA186_CLK_APE>; + clock-names = "clk"; + status = "disabled"; + }; + }; + memory-controller@2c00000 { compatible = "nvidia,tegra186-mc"; reg = <0x0 0x02c00000 0x0 0xb0000>; @@ -173,6 +242,9 @@ clock-names = "div-clk"; resets = <&bpmp TEGRA186_RESET_I2C4>; reset-names = "i2c"; + pinctrl-names = "default", "idle"; + pinctrl-0 = <&state_dpaux1_i2c>; + pinctrl-1 = <&state_dpaux1_off>; status = "disabled"; }; @@ -201,6 +273,9 @@ clock-names = "div-clk"; resets = <&bpmp TEGRA186_RESET_I2C6>; reset-names = "i2c"; + pinctrl-names = "default", "idle"; + pinctrl-0 = <&state_dpaux_i2c>; + pinctrl-1 = <&state_dpaux_off>; status = "disabled"; }; @@ -1121,6 +1196,30 @@ }; }; + bpmp: bpmp { + compatible = "nvidia,tegra186-bpmp"; + iommus = <&smmu TEGRA186_SID_BPMP>; + mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB + TEGRA_HSP_DB_MASTER_BPMP>; + shmem = <&cpu_bpmp_tx &cpu_bpmp_rx>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + + bpmp_i2c: i2c { + compatible = "nvidia,tegra186-bpmp-i2c"; + nvidia,bpmp-bus-id = <5>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + bpmp_thermal: thermal { + compatible = "nvidia,tegra186-bpmp-thermal"; + #thermal-sensor-cells = <1>; + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -1128,61 +1227,97 @@ cpu@0 { compatible = "nvidia,tegra186-denver"; device_type = "cpu"; + i-cache-size = <0x20000>; + i-cache-line-size = <64>; + i-cache-sets = <512>; + d-cache-size = <0x10000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&L2_DENVER>; reg = <0x000>; }; cpu@1 { compatible = "nvidia,tegra186-denver"; device_type = "cpu"; + i-cache-size = <0x20000>; + i-cache-line-size = <64>; + i-cache-sets = <512>; + d-cache-size = <0x10000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&L2_DENVER>; reg = <0x001>; }; cpu@2 { compatible = "arm,cortex-a57"; device_type = "cpu"; + i-cache-size = <0xC000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&L2_A57>; reg = <0x100>; }; cpu@3 { compatible = "arm,cortex-a57"; device_type = "cpu"; + i-cache-size = <0xC000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&L2_A57>; reg = <0x101>; }; cpu@4 { compatible = "arm,cortex-a57"; device_type = "cpu"; + i-cache-size = <0xC000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&L2_A57>; reg = <0x102>; }; cpu@5 { compatible = "arm,cortex-a57"; device_type = "cpu"; + i-cache-size = <0xC000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&L2_A57>; reg = <0x103>; }; - }; - bpmp: bpmp { - compatible = "nvidia,tegra186-bpmp"; - iommus = <&smmu TEGRA186_SID_BPMP>; - mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB - TEGRA_HSP_DB_MASTER_BPMP>; - shmem = <&cpu_bpmp_tx &cpu_bpmp_rx>; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - - bpmp_i2c: i2c { - compatible = "nvidia,tegra186-bpmp-i2c"; - nvidia,bpmp-bus-id = <5>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; + L2_DENVER: l2-cache0 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + cache-size = <0x200000>; + cache-line-size = <64>; + cache-sets = <2048>; }; - bpmp_thermal: thermal { - compatible = "nvidia,tegra186-bpmp-thermal"; - #thermal-sensor-cells = <1>; + L2_A57: l2-cache1 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + cache-size = <0x200000>; + cache-line-size = <64>; + cache-sets = <2048>; }; }; @@ -1294,5 +1429,6 @@ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; interrupt-parent = <&gic>; + always-on; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi index 0fd5bd29fbf9..4c38426a6969 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi @@ -4,7 +4,7 @@ #include <dt-bindings/mfd/max77620.h> / { - model = "NVIDIA Tegra194 P2888 Processor Module"; + model = "NVIDIA Jetson AGX Xavier"; compatible = "nvidia,p2888", "nvidia,tegra194"; aliases { @@ -191,7 +191,7 @@ regulator-boot-on; }; - sd3 { + vdd_1v8ao: sd3 { regulator-name = "VDD_1V8AO"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -289,5 +289,29 @@ gpio = <&gpio TEGRA194_MAIN_GPIO(A, 3) GPIO_ACTIVE_HIGH>; enable-active-high; }; + + vdd_3v3_pcie: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + + regulator-name = "PEX_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio TEGRA194_MAIN_GPIO(Z, 2) GPIO_ACTIVE_HIGH>; + regulator-boot-on; + enable-active-high; + }; + + vdd_12v_pcie: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + + regulator-name = "VDD_12V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + gpio = <&gpio TEGRA194_MAIN_GPIO(A, 1) GPIO_ACTIVE_LOW>; + regulator-boot-on; + enable-active-low; + }; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts index 73801b48d1d8..d47cd8c4dd24 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts @@ -7,10 +7,22 @@ #include "tegra194-p2888.dtsi" / { - model = "NVIDIA Jetson AGX Xavier Development Kit"; + model = "NVIDIA Jetson AGX Xavier Developer Kit"; compatible = "nvidia,p2972-0000", "nvidia,tegra194"; cbb { + aconnect { + status = "okay"; + + dma-controller@2930000 { + status = "okay"; + }; + + interrupt-controller@2a40000 { + status = "okay"; + }; + }; + ddc: i2c@31c0000 { status = "okay"; }; @@ -52,6 +64,49 @@ }; }; + pcie@14100000 { + status = "okay"; + + vddio-pex-ctl-supply = <&vdd_1v8ao>; + + phys = <&p2u_hsio_0>; + phy-names = "p2u-0"; + }; + + pcie@14140000 { + status = "okay"; + + vddio-pex-ctl-supply = <&vdd_1v8ao>; + + phys = <&p2u_hsio_7>; + phy-names = "p2u-0"; + }; + + pcie@14180000 { + status = "okay"; + + vddio-pex-ctl-supply = <&vdd_1v8ao>; + + phys = <&p2u_hsio_2>, <&p2u_hsio_3>, <&p2u_hsio_4>, + <&p2u_hsio_5>; + phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3"; + }; + + pcie@141a0000 { + status = "okay"; + + vddio-pex-ctl-supply = <&vdd_1v8ao>; + vpcie3v3-supply = <&vdd_3v3_pcie>; + vpcie12v-supply = <&vdd_12v_pcie>; + + phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>, + <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>, + <&p2u_nvhs_6>, <&p2u_nvhs_7>; + + phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4", + "p2u-5", "p2u-6", "p2u-7"; + }; + fan: fan { compatible = "pwm-fan"; pwms = <&pwm4 0 45334>; diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi index c77ca211fa8f..3c0cf54f0aab 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi @@ -3,8 +3,9 @@ #include <dt-bindings/gpio/tegra194-gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/mailbox/tegra186-hsp.h> -#include <dt-bindings/reset/tegra194-reset.h> +#include <dt-bindings/pinctrl/pinctrl-tegra.h> #include <dt-bindings/power/tegra194-powergate.h> +#include <dt-bindings/reset/tegra194-reset.h> #include <dt-bindings/thermal/tegra194-bpmp-thermal.h> / { @@ -59,6 +60,109 @@ snps,rxpbl = <8>; }; + aconnect { + compatible = "nvidia,tegra194-aconnect", + "nvidia,tegra210-aconnect"; + clocks = <&bpmp TEGRA194_CLK_APE>, + <&bpmp TEGRA194_CLK_APB2APE>; + clock-names = "ape", "apb2ape"; + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_AUD>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x02900000 0x02900000 0x200000>; + status = "disabled"; + + dma-controller@2930000 { + compatible = "nvidia,tegra194-adma", + "nvidia,tegra186-adma"; + reg = <0x02930000 0x20000>; + interrupt-parent = <&agic>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + clocks = <&bpmp TEGRA194_CLK_AHUB>; + clock-names = "d_audio"; + status = "disabled"; + }; + + agic: interrupt-controller@2a40000 { + compatible = "nvidia,tegra194-agic", + "nvidia,tegra210-agic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x02a41000 0x1000>, + <0x02a42000 0x2000>; + interrupts = <GIC_SPI 145 + (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&bpmp TEGRA194_CLK_APE>; + clock-names = "clk"; + status = "disabled"; + }; + }; + + pinmux: pinmux@2430000 { + compatible = "nvidia,tegra194-pinmux"; + reg = <0x2430000 0x17000 + 0xc300000 0x4000>; + + status = "okay"; + + pex_rst_c5_out_state: pex_rst_c5_out { + pex_rst { + nvidia,pins = "pex_l5_rst_n_pgg1"; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; + nvidia,lpdr = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,io-high-voltage = <TEGRA_PIN_ENABLE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + }; + }; + + clkreq_c5_bi_dir_state: clkreq_c5_bi_dir { + clkreq { + nvidia,pins = "pex_l5_clkreq_n_pgg0"; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; + nvidia,lpdr = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,io-high-voltage = <TEGRA_PIN_ENABLE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + }; + }; + }; + uarta: serial@3100000 { compatible = "nvidia,tegra194-uart", "nvidia,tegra20-uart"; reg = <0x03100000 0x40>; @@ -423,6 +527,166 @@ #mbox-cells = <2>; }; + p2u_hsio_0: phy@3e10000 { + compatible = "nvidia,tegra194-p2u"; + reg = <0x03e10000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_hsio_1: phy@3e20000 { + compatible = "nvidia,tegra194-p2u"; + reg = <0x03e20000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_hsio_2: phy@3e30000 { + compatible = "nvidia,tegra194-p2u"; + reg = <0x03e30000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_hsio_3: phy@3e40000 { + compatible = "nvidia,tegra194-p2u"; + reg = <0x03e40000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_hsio_4: phy@3e50000 { + compatible = "nvidia,tegra194-p2u"; + reg = <0x03e50000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_hsio_5: phy@3e60000 { + compatible = "nvidia,tegra194-p2u"; + reg = <0x03e60000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_hsio_6: phy@3e70000 { + compatible = "nvidia,tegra194-p2u"; + reg = <0x03e70000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_hsio_7: phy@3e80000 { + compatible = "nvidia,tegra194-p2u"; + reg = <0x03e80000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_hsio_8: phy@3e90000 { + compatible = "nvidia,tegra194-p2u"; + reg = <0x03e90000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_hsio_9: phy@3ea0000 { + compatible = "nvidia,tegra194-p2u"; + reg = <0x03ea0000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_nvhs_0: phy@3eb0000 { + compatible = "nvidia,tegra194-p2u"; + reg = <0x03eb0000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_nvhs_1: phy@3ec0000 { + compatible = "nvidia,tegra194-p2u"; + reg = <0x03ec0000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_nvhs_2: phy@3ed0000 { + compatible = "nvidia,tegra194-p2u"; + reg = <0x03ed0000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_nvhs_3: phy@3ee0000 { + compatible = "nvidia,tegra194-p2u"; + reg = <0x03ee0000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_nvhs_4: phy@3ef0000 { + compatible = "nvidia,tegra194-p2u"; + reg = <0x03ef0000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_nvhs_5: phy@3f00000 { + compatible = "nvidia,tegra194-p2u"; + reg = <0x03f00000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_nvhs_6: phy@3f10000 { + compatible = "nvidia,tegra194-p2u"; + reg = <0x03f10000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_nvhs_7: phy@3f20000 { + compatible = "nvidia,tegra194-p2u"; + reg = <0x03f20000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_hsio_10: phy@3f30000 { + compatible = "nvidia,tegra194-p2u"; + reg = <0x03f30000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_hsio_11: phy@3f40000 { + compatible = "nvidia,tegra194-p2u"; + reg = <0x03f40000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + hsp_aon: hsp@c150000 { compatible = "nvidia,tegra194-hsp", "nvidia,tegra186-hsp"; reg = <0x0c150000 0xa0000>; @@ -886,6 +1150,286 @@ }; }; + pcie@14100000 { + compatible = "nvidia,tegra194-pcie", "snps,dw-pcie"; + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX1A>; + reg = <0x00 0x14100000 0x0 0x00020000 /* appl registers (128K) */ + 0x00 0x30000000 0x0 0x00040000 /* configuration space (256K) */ + 0x00 0x30040000 0x0 0x00040000 /* iATU_DMA reg space (256K) */ + 0x00 0x30080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg-names = "appl", "config", "atu_dma", "dbi"; + + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <1>; + num-viewport = <8>; + linux,pci-domain = <1>; + + clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_1>; + clock-names = "core"; + + resets = <&bpmp TEGRA194_RESET_PEX0_CORE_1_APB>, + <&bpmp TEGRA194_RESET_PEX0_CORE_1>; + reset-names = "apb", "core"; + + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + + nvidia,bpmp = <&bpmp 1>; + + supports-clkreq; + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x30100000 0x0 0x30100000 0x0 0x00100000 /* downstream I/O (1MB) */ + 0xc2000000 0x12 0x00000000 0x12 0x00000000 0x0 0x30000000 /* prefetchable memory (768MB) */ + 0x82000000 0x0 0x40000000 0x12 0x30000000 0x0 0x10000000>; /* non-prefetchable memory (256MB) */ + }; + + pcie@14120000 { + compatible = "nvidia,tegra194-pcie", "snps,dw-pcie"; + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX1A>; + reg = <0x00 0x14120000 0x0 0x00020000 /* appl registers (128K) */ + 0x00 0x32000000 0x0 0x00040000 /* configuration space (256K) */ + 0x00 0x32040000 0x0 0x00040000 /* iATU_DMA reg space (256K) */ + 0x00 0x32080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg-names = "appl", "config", "atu_dma", "dbi"; + + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <1>; + num-viewport = <8>; + linux,pci-domain = <2>; + + clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_2>; + clock-names = "core"; + + resets = <&bpmp TEGRA194_RESET_PEX0_CORE_2_APB>, + <&bpmp TEGRA194_RESET_PEX0_CORE_2>; + reset-names = "apb", "core"; + + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + + nvidia,bpmp = <&bpmp 2>; + + supports-clkreq; + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x32100000 0x0 0x32100000 0x0 0x00100000 /* downstream I/O (1MB) */ + 0xc2000000 0x12 0x40000000 0x12 0x40000000 0x0 0x30000000 /* prefetchable memory (768MB) */ + 0x82000000 0x0 0x40000000 0x12 0x70000000 0x0 0x10000000>; /* non-prefetchable memory (256MB) */ + }; + + pcie@14140000 { + compatible = "nvidia,tegra194-pcie", "snps,dw-pcie"; + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX1A>; + reg = <0x00 0x14140000 0x0 0x00020000 /* appl registers (128K) */ + 0x00 0x34000000 0x0 0x00040000 /* configuration space (256K) */ + 0x00 0x34040000 0x0 0x00040000 /* iATU_DMA reg space (256K) */ + 0x00 0x34080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg-names = "appl", "config", "atu_dma", "dbi"; + + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <1>; + num-viewport = <8>; + linux,pci-domain = <3>; + + clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_3>; + clock-names = "core"; + + resets = <&bpmp TEGRA194_RESET_PEX0_CORE_3_APB>, + <&bpmp TEGRA194_RESET_PEX0_CORE_3>; + reset-names = "apb", "core"; + + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + + nvidia,bpmp = <&bpmp 3>; + + supports-clkreq; + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x34100000 0x0 0x34100000 0x0 0x00100000 /* downstream I/O (1MB) */ + 0xc2000000 0x12 0x80000000 0x12 0x80000000 0x0 0x30000000 /* prefetchable memory (768MB) */ + 0x82000000 0x0 0x40000000 0x12 0xb0000000 0x0 0x10000000>; /* non-prefetchable memory (256MB) */ + }; + + pcie@14160000 { + compatible = "nvidia,tegra194-pcie", "snps,dw-pcie"; + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX4A>; + reg = <0x00 0x14160000 0x0 0x00020000 /* appl registers (128K) */ + 0x00 0x36000000 0x0 0x00040000 /* configuration space (256K) */ + 0x00 0x36040000 0x0 0x00040000 /* iATU_DMA reg space (256K) */ + 0x00 0x36080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg-names = "appl", "config", "atu_dma", "dbi"; + + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <4>; + num-viewport = <8>; + linux,pci-domain = <4>; + + clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_4>; + clock-names = "core"; + + resets = <&bpmp TEGRA194_RESET_PEX0_CORE_4_APB>, + <&bpmp TEGRA194_RESET_PEX0_CORE_4>; + reset-names = "apb", "core"; + + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + + nvidia,bpmp = <&bpmp 4>; + + supports-clkreq; + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x36100000 0x0 0x36100000 0x0 0x00100000 /* downstream I/O (1MB) */ + 0xc2000000 0x14 0x00000000 0x14 0x00000000 0x3 0x40000000 /* prefetchable memory (13GB) */ + 0x82000000 0x0 0x40000000 0x17 0x40000000 0x0 0xc0000000>; /* non-prefetchable memory (3GB) */ + }; + + pcie@14180000 { + compatible = "nvidia,tegra194-pcie", "snps,dw-pcie"; + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>; + reg = <0x00 0x14180000 0x0 0x00020000 /* appl registers (128K) */ + 0x00 0x38000000 0x0 0x00040000 /* configuration space (256K) */ + 0x00 0x38040000 0x0 0x00040000 /* iATU_DMA reg space (256K) */ + 0x00 0x38080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg-names = "appl", "config", "atu_dma", "dbi"; + + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <8>; + num-viewport = <8>; + linux,pci-domain = <0>; + + clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_0>; + clock-names = "core"; + + resets = <&bpmp TEGRA194_RESET_PEX0_CORE_0_APB>, + <&bpmp TEGRA194_RESET_PEX0_CORE_0>; + reset-names = "apb", "core"; + + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + + nvidia,bpmp = <&bpmp 0>; + + supports-clkreq; + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x38100000 0x0 0x38100000 0x0 0x00100000 /* downstream I/O (1MB) */ + 0xc2000000 0x18 0x00000000 0x18 0x00000000 0x3 0x40000000 /* prefetchable memory (13GB) */ + 0x82000000 0x0 0x40000000 0x1b 0x40000000 0x0 0xc0000000>; /* non-prefetchable memory (3GB) */ + }; + + pcie@141a0000 { + compatible = "nvidia,tegra194-pcie", "snps,dw-pcie"; + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>; + reg = <0x00 0x141a0000 0x0 0x00020000 /* appl registers (128K) */ + 0x00 0x3a000000 0x0 0x00040000 /* configuration space (256K) */ + 0x00 0x3a040000 0x0 0x00040000 /* iATU_DMA reg space (256K) */ + 0x00 0x3a080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg-names = "appl", "config", "atu_dma", "dbi"; + + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <8>; + num-viewport = <8>; + linux,pci-domain = <5>; + + pinctrl-names = "default"; + pinctrl-0 = <&pex_rst_c5_out_state>, <&clkreq_c5_bi_dir_state>; + + clocks = <&bpmp TEGRA194_CLK_PEX1_CORE_5>, + <&bpmp TEGRA194_CLK_PEX1_CORE_5M>; + clock-names = "core", "core_m"; + + resets = <&bpmp TEGRA194_RESET_PEX1_CORE_5_APB>, + <&bpmp TEGRA194_RESET_PEX1_CORE_5>; + reset-names = "apb", "core"; + + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + nvidia,bpmp = <&bpmp 5>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + + supports-clkreq; + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x3a100000 0x0 0x3a100000 0x0 0x00100000 /* downstream I/O (1MB) */ + 0xc2000000 0x1c 0x00000000 0x1c 0x00000000 0x3 0x40000000 /* prefetchable memory (13GB) */ + 0x82000000 0x0 0x40000000 0x1f 0x40000000 0x0 0xc0000000>; /* non-prefetchable memory (3GB) */ + }; + sysram@40000000 { compatible = "nvidia,tegra194-sysram", "mmio-sram"; reg = <0x0 0x40000000 0x0 0x50000>; @@ -1053,5 +1597,6 @@ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; interrupt-parent = <&gic>; + always-on; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi index 4dcd0d36189a..27723829d033 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi @@ -264,6 +264,19 @@ }; }; + i2c@7000c500 { + /* module ID EEPROM */ + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + + address-bits = <8>; + page-size = <8>; + size = <256>; + read-only; + }; + }; + pmc@7000e400 { nvidia,invert-interrupt; }; @@ -328,7 +341,8 @@ regulator-max-microvolt = <1320000>; enable-gpios = <&pmic 6 GPIO_ACTIVE_HIGH>; regulator-ramp-delay = <80>; - regulator-enable-ramp-delay = <1000>; + regulator-enable-ramp-delay = <2000>; + regulator-settling-time-us = <160>; }; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts index 5a57396b5948..a3cafe39ba4c 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts @@ -79,6 +79,19 @@ }; }; + i2c@7000c500 { + /* carrier board ID EEPROM */ + eeprom@57 { + compatible = "atmel,24c02"; + reg = <0x57>; + + address-bits = <8>; + page-size = <8>; + size = <256>; + read-only; + }; + }; + clock@70110000 { status = "okay"; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts index 5d0181908f45..9d17ec707bce 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts @@ -88,6 +88,35 @@ status = "okay"; }; + pwm@7000a000 { + status = "okay"; + }; + + i2c@7000c500 { + status = "okay"; + clock-frequency = <100000>; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + + address-bits = <8>; + page-size = <8>; + size = <256>; + read-only; + }; + + eeprom@57 { + compatible = "atmel,24c02"; + reg = <0x57>; + + address-bits = <8>; + page-size = <8>; + size = <256>; + read-only; + }; + }; + hdmi_ddc: i2c@7000c700 { status = "okay"; clock-frequency = <100000>; @@ -515,6 +544,12 @@ cpu@3 { enable-method = "psci"; }; + + idle-states { + cpu-sleep { + status = "okay"; + }; + }; }; gpio-keys { @@ -633,17 +668,16 @@ }; vdd_gpu: regulator@6 { - compatible = "regulator-fixed"; + compatible = "pwm-regulator"; reg = <6>; - + pwms = <&pwm 1 4880>; regulator-name = "VDD_GPU"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-enable-ramp-delay = <250>; - - gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; - enable-active-high; - + regulator-min-microvolt = <710000>; + regulator-max-microvolt = <1320000>; + regulator-ramp-delay = <80>; + regulator-enable-ramp-delay = <2000>; + regulator-settling-time-us = <160>; + enable-gpios = <&pmic 6 GPIO_ACTIVE_HIGH>; vin-supply = <&vdd_5v0_sys>; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi index a550c0a4d572..659753118e96 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi @@ -48,6 +48,11 @@ <&tegra_car 72>, <&tegra_car 74>; reset-names = "pex", "afi", "pcie_x"; + + pinctrl-names = "default", "idle"; + pinctrl-0 = <&pex_dpd_disable>; + pinctrl-1 = <&pex_dpd_enable>; + status = "disabled"; pci@1,0 { @@ -848,6 +853,20 @@ pins = "sdmmc3"; power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>; }; + + pex_dpd_disable: pex_en { + pex-dpd-disable { + pins = "pex-bias", "pex-clk1", "pex-clk2"; + low-power-disable; + }; + }; + + pex_dpd_enable: pex_dis { + pex-dpd-enable { + pins = "pex-bias", "pex-clk1", "pex-clk2"; + low-power-enable; + }; + }; }; fuse@7000f800 { @@ -1258,7 +1277,7 @@ compatible = "nvidia,tegra210-agic"; #interrupt-cells = <3>; interrupt-controller; - reg = <0x702f9000 0x2000>, + reg = <0x702f9000 0x1000>, <0x702fa000 0x2000>; interrupts = <GIC_SPI 102 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; clocks = <&tegra_car TEGRA210_CLK_APE>; @@ -1430,6 +1449,7 @@ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; interrupt-parent = <&gic>; + arm,no-tick-in-suspend; }; soctherm: thermal-sensor@700e2000 { diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 21d548f02d39..6498a1ec893f 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -3,10 +3,22 @@ dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8150.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a3u-eur.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a5u-eur.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8994-angler-rev-101.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8998-asus-novago-tp370ql.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8998-hp-envy-x2.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8998-lenovo-miix-630.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r1.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r2.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r3.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm845-db845c.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8150-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts new file mode 100644 index 000000000000..2b28e383fd0b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts @@ -0,0 +1,228 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916.dtsi" +#include "pm8916.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Longcheer L8150"; + compatible = "longcheer,l8150", "qcom,msm8916-v1-qrd/9-v1", "qcom,msm8916"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + soc { + sdhci@7824000 { + status = "okay"; + + vmmc-supply = <&pm8916_l8>; + vqmmc-supply = <&pm8916_l5>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; + }; + + sdhci@7864000 { + status = "okay"; + + vmmc-supply = <&pm8916_l11>; + vqmmc-supply = <&pm8916_l12>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; + + non-removable; + }; + + serial@78b0000 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_uart2_default>; + pinctrl-1 = <&blsp1_uart2_sleep>; + }; + + usb@78d9000 { + status = "okay"; + dr_mode = "peripheral"; + extcon = <&usb_vbus>; + + hnp-disable; + srp-disable; + adp-disable; + + ulpi { + phy { + extcon = <&usb_vbus>; + v1p8-supply = <&pm8916_l7>; + v3p3-supply = <&pm8916_l13>; + }; + }; + }; + + /* + * Attempting to enable these devices causes a "synchronous + * external abort". Suspected cause is that the debug power + * domain is not enabled by default on this device. + * Disable these devices for now to avoid the crash. + * + * See: https://lore.kernel.org/linux-arm-msm/20190618202623.GA53651@gerhold.net/ + */ + tpiu@820000 { status = "disabled"; }; + funnel@821000 { status = "disabled"; }; + replicator@824000 { status = "disabled"; }; + etf@825000 { status = "disabled"; }; + etr@826000 { status = "disabled"; }; + funnel@841000 { status = "disabled"; }; + debug@850000 { status = "disabled"; }; + debug@852000 { status = "disabled"; }; + debug@854000 { status = "disabled"; }; + debug@856000 { status = "disabled"; }; + etm@85c000 { status = "disabled"; }; + etm@85d000 { status = "disabled"; }; + etm@85e000 { status = "disabled"; }; + etm@85f000 { status = "disabled"; }; + }; + + // FIXME: Use extcon device provided by charger driver when available + usb_vbus: usb-vbus { + compatible = "linux,extcon-usb-gpio"; + vbus-gpio = <&msmgpio 62 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_vbus_default>; + }; +}; + +&msmgpio { + usb_vbus_default: usb-vbus-default { + pinmux { + function = "gpio"; + pins = "gpio62"; + }; + pinconf { + pins = "gpio62"; + bias-pull-up; + }; + }; +}; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + s1 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1300000>; + }; + + s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l3 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1287500>; + }; + + l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l10 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2800000>; + }; + + l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi new file mode 100644 index 000000000000..e675ff48fdd2 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi @@ -0,0 +1,236 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include "msm8916.dtsi" +#include "pm8916.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + soc { + sdhci@7824000 { + status = "okay"; + + vmmc-supply = <&pm8916_l8>; + vqmmc-supply = <&pm8916_l5>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; + }; + + sdhci@7864000 { + status = "okay"; + + vmmc-supply = <&pm8916_l11>; + vqmmc-supply = <&pm8916_l12>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + + cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; + }; + + serial@78b0000 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_uart2_default>; + pinctrl-1 = <&blsp1_uart2_sleep>; + }; + + usb@78d9000 { + status = "okay"; + extcon = <&muic>, <&muic>; + + hnp-disable; + srp-disable; + adp-disable; + + ulpi { + phy { + extcon = <&muic>; + v1p8-supply = <&pm8916_l7>; + v3p3-supply = <&pm8916_l13>; + }; + }; + }; + + /* + * Attempting to enable these devices causes a "synchronous + * external abort". Suspected cause is that the debug power + * domain is not enabled by default on this device. + * Disable these devices for now to avoid the crash. + * + * See: https://lore.kernel.org/linux-arm-msm/20190618202623.GA53651@gerhold.net/ + */ + tpiu@820000 { status = "disabled"; }; + funnel@821000 { status = "disabled"; }; + replicator@824000 { status = "disabled"; }; + etf@825000 { status = "disabled"; }; + etr@826000 { status = "disabled"; }; + funnel@841000 { status = "disabled"; }; + debug@850000 { status = "disabled"; }; + debug@852000 { status = "disabled"; }; + debug@854000 { status = "disabled"; }; + debug@856000 { status = "disabled"; }; + etm@85c000 { status = "disabled"; }; + etm@85d000 { status = "disabled"; }; + etm@85e000 { status = "disabled"; }; + etm@85f000 { status = "disabled"; }; + }; + + i2c-muic { + compatible = "i2c-gpio"; + sda-gpios = <&msmgpio 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&msmgpio 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + + #address-cells = <1>; + #size-cells = <0>; + + muic: sm5502@25 { + compatible = "siliconmitus,sm5502-muic"; + + reg = <0x25>; + interrupt-parent = <&msmgpio>; + interrupts = <12 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&muic_int_default>; + }; + }; +}; + +&msmgpio { + muic_int_default: muic_int_default { + pinmux { + function = "gpio"; + pins = "gpio12"; + }; + pinconf { + pins = "gpio12"; + drive-strength = <2>; + bias-disable; + }; + }; +}; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + s1 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1300000>; + }; + + s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l3 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1287500>; + }; + + l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l10 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2800000>; + }; + + l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts new file mode 100644 index 000000000000..d10f7ac5089f --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts @@ -0,0 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-samsung-a2015-common.dtsi" + +/ { + model = "Samsung Galaxy A3U (EUR)"; + compatible = "samsung,a3u-eur", "qcom,msm8916"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts new file mode 100644 index 000000000000..1aa59da98495 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts @@ -0,0 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-samsung-a2015-common.dtsi" + +/ { + model = "Samsung Galaxy A5U (EUR)"; + compatible = "samsung,a5u-eur", "qcom,msm8916"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index dacd465fc62e..5ea9fb8f2f87 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -102,7 +102,7 @@ reg = <0x0>; next-level-cache = <&L2_0>; enable-method = "psci"; - cpu-idle-states = <&CPU_SPC>; + cpu-idle-states = <&CPU_SLEEP_0>; clocks = <&apcs>; operating-points-v2 = <&cpu_opp_table>; #cooling-cells = <2>; @@ -114,7 +114,7 @@ reg = <0x1>; next-level-cache = <&L2_0>; enable-method = "psci"; - cpu-idle-states = <&CPU_SPC>; + cpu-idle-states = <&CPU_SLEEP_0>; clocks = <&apcs>; operating-points-v2 = <&cpu_opp_table>; #cooling-cells = <2>; @@ -126,7 +126,7 @@ reg = <0x2>; next-level-cache = <&L2_0>; enable-method = "psci"; - cpu-idle-states = <&CPU_SPC>; + cpu-idle-states = <&CPU_SLEEP_0>; clocks = <&apcs>; operating-points-v2 = <&cpu_opp_table>; #cooling-cells = <2>; @@ -138,7 +138,7 @@ reg = <0x3>; next-level-cache = <&L2_0>; enable-method = "psci"; - cpu-idle-states = <&CPU_SPC>; + cpu-idle-states = <&CPU_SLEEP_0>; clocks = <&apcs>; operating-points-v2 = <&cpu_opp_table>; #cooling-cells = <2>; @@ -150,8 +150,11 @@ }; idle-states { - CPU_SPC: spc { + entry-method = "psci"; + + CPU_SLEEP_0: cpu-sleep-0 { compatible = "arm,idle-state"; + idle-state-name = "standalone-power-collapse"; arm,psci-suspend-param = <0x40000002>; entry-latency-us = <130>; exit-latency-us = <150>; @@ -1164,7 +1167,7 @@ }; funnel@821000 { - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0x821000 0x1000>; clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; @@ -1277,7 +1280,7 @@ }; funnel@841000 { /* APSS funnel only 4 inputs are used */ - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0x841000 0x1000>; clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 942465d8aeb7..87f4d9c1b0d4 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -94,6 +94,8 @@ compatible = "qcom,kryo"; reg = <0x0 0x0>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + capacity-dmips-mhz = <1024>; next-level-cache = <&L2_0>; L2_0: l2-cache { compatible = "cache"; @@ -106,6 +108,8 @@ compatible = "qcom,kryo"; reg = <0x0 0x1>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + capacity-dmips-mhz = <1024>; next-level-cache = <&L2_0>; }; @@ -114,6 +118,8 @@ compatible = "qcom,kryo"; reg = <0x0 0x100>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + capacity-dmips-mhz = <1024>; next-level-cache = <&L2_1>; L2_1: l2-cache { compatible = "cache"; @@ -126,6 +132,8 @@ compatible = "qcom,kryo"; reg = <0x0 0x101>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + capacity-dmips-mhz = <1024>; next-level-cache = <&L2_1>; }; @@ -150,6 +158,19 @@ }; }; }; + + idle-states { + entry-method = "psci"; + + CPU_SLEEP_0: cpu-sleep-0 { + compatible = "arm,idle-state"; + idle-state-name = "standalone-power-collapse"; + arm,psci-suspend-param = <0x00000004>; + entry-latency-us = <130>; + exit-latency-us = <80>; + min-residency-us = <300>; + }; + }; }; thermal-zones { @@ -612,6 +633,474 @@ reg = <0x300000 0x90000>; }; + stm@3002000 { + compatible = "arm,coresight-stm", "arm,primecell"; + reg = <0x3002000 0x1000>, + <0x8280000 0x180000>; + reg-names = "stm-base", "stm-stimulus-base"; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + out-ports { + port { + stm_out: endpoint { + remote-endpoint = + <&funnel0_in>; + }; + }; + }; + }; + + tpiu@3020000 { + compatible = "arm,coresight-tpiu", "arm,primecell"; + reg = <0x3020000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + in-ports { + port { + tpiu_in: endpoint { + remote-endpoint = + <&replicator_out1>; + }; + }; + }; + }; + + funnel@3021000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x3021000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@7 { + reg = <7>; + funnel0_in: endpoint { + remote-endpoint = + <&stm_out>; + }; + }; + }; + + out-ports { + port { + funnel0_out: endpoint { + remote-endpoint = + <&merge_funnel_in0>; + }; + }; + }; + }; + + funnel@3022000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x3022000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@6 { + reg = <6>; + funnel1_in: endpoint { + remote-endpoint = + <&apss_merge_funnel_out>; + }; + }; + }; + + out-ports { + port { + funnel1_out: endpoint { + remote-endpoint = + <&merge_funnel_in1>; + }; + }; + }; + }; + + funnel@3023000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x3023000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + + out-ports { + port { + funnel2_out: endpoint { + remote-endpoint = + <&merge_funnel_in2>; + }; + }; + }; + }; + + funnel@3025000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x3025000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + merge_funnel_in0: endpoint { + remote-endpoint = + <&funnel0_out>; + }; + }; + + port@1 { + reg = <1>; + merge_funnel_in1: endpoint { + remote-endpoint = + <&funnel1_out>; + }; + }; + + port@2 { + reg = <2>; + merge_funnel_in2: endpoint { + remote-endpoint = + <&funnel2_out>; + }; + }; + }; + + out-ports { + port { + merge_funnel_out: endpoint { + remote-endpoint = + <&etf_in>; + }; + }; + }; + }; + + replicator@3026000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0x3026000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + in-ports { + port { + replicator_in: endpoint { + remote-endpoint = + <&etf_out>; + }; + }; + }; + + out-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + replicator_out0: endpoint { + remote-endpoint = + <&etr_in>; + }; + }; + + port@1 { + reg = <1>; + replicator_out1: endpoint { + remote-endpoint = + <&tpiu_in>; + }; + }; + }; + }; + + etf@3027000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x3027000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + in-ports { + port { + etf_in: endpoint { + remote-endpoint = + <&merge_funnel_out>; + }; + }; + }; + + out-ports { + port { + etf_out: endpoint { + remote-endpoint = + <&replicator_in>; + }; + }; + }; + }; + + etr@3028000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x3028000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + arm,scatter-gather; + + in-ports { + port { + etr_in: endpoint { + remote-endpoint = + <&replicator_out0>; + }; + }; + }; + }; + + debug@3810000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0x3810000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + cpu = <&CPU0>; + }; + + etm@3840000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x3840000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU0>; + + out-ports { + port { + etm0_out: endpoint { + remote-endpoint = + <&apss_funnel0_in0>; + }; + }; + }; + }; + + debug@3910000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0x3910000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + cpu = <&CPU1>; + }; + + etm@3940000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x3940000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU1>; + + out-ports { + port { + etm1_out: endpoint { + remote-endpoint = + <&apss_funnel0_in1>; + }; + }; + }; + }; + + funnel@39b0000 { /* APSS Funnel 0 */ + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x39b0000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + apss_funnel0_in0: endpoint { + remote-endpoint = <&etm0_out>; + }; + }; + + port@1 { + reg = <1>; + apss_funnel0_in1: endpoint { + remote-endpoint = <&etm1_out>; + }; + }; + }; + + out-ports { + port { + apss_funnel0_out: endpoint { + remote-endpoint = + <&apss_merge_funnel_in0>; + }; + }; + }; + }; + + debug@3a10000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0x3a10000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + cpu = <&CPU2>; + }; + + etm@3a40000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x3a40000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU2>; + + out-ports { + port { + etm2_out: endpoint { + remote-endpoint = + <&apss_funnel1_in0>; + }; + }; + }; + }; + + debug@3b10000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0x3b10000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + cpu = <&CPU3>; + }; + + etm@3b40000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x3b40000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU3>; + + out-ports { + port { + etm3_out: endpoint { + remote-endpoint = + <&apss_funnel1_in1>; + }; + }; + }; + }; + + funnel@3bb0000 { /* APSS Funnel 1 */ + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x3bb0000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + apss_funnel1_in0: endpoint { + remote-endpoint = <&etm2_out>; + }; + }; + + port@1 { + reg = <1>; + apss_funnel1_in1: endpoint { + remote-endpoint = <&etm3_out>; + }; + }; + }; + + out-ports { + port { + apss_funnel1_out: endpoint { + remote-endpoint = + <&apss_merge_funnel_in1>; + }; + }; + }; + }; + + funnel@3bc0000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x3bc0000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + apss_merge_funnel_in0: endpoint { + remote-endpoint = + <&apss_funnel0_out>; + }; + }; + + port@1 { + reg = <1>; + apss_merge_funnel_in1: endpoint { + remote-endpoint = + <&apss_funnel1_out>; + }; + }; + }; + + out-ports { + port { + apss_merge_funnel_out: endpoint { + remote-endpoint = + <&funnel1_in>; + }; + }; + }; + }; + kryocc: clock-controller@6400000 { compatible = "qcom,apcc-msm8996"; reg = <0x6400000 0x90000>; @@ -846,10 +1335,11 @@ clock-names = "ref_clk_src", "ref_clk"; clocks = <&rpmcc RPM_SMD_LN_BB_CLK>, <&gcc GCC_UFS_CLKREF_CLK>; + resets = <&ufshc 0>; status = "disabled"; }; - ufshc@624000 { + ufshc: ufshc@624000 { compatible = "qcom,ufshc"; reg = <0x624000 0x2500>; interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; @@ -905,6 +1395,7 @@ <0 0>; lanes-per-direction = <1>; + #reset-cells = <1>; status = "disabled"; ufs_variant { @@ -1140,7 +1631,7 @@ }; }; - vfe_smmu: arm,smmu@da0000 { + vfe_smmu: iommu@da0000 { compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; reg = <0xda0000 0x10000>; @@ -1154,7 +1645,6 @@ clock-names = "iface", "bus"; #iommu-cells = <1>; - status = "disabled"; }; camss: camss@a00000 { @@ -1292,7 +1782,7 @@ }; }; - adreno_smmu: arm,smmu@b40000 { + adreno_smmu: iommu@b40000 { compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; reg = <0xb40000 0x10000>; @@ -1307,11 +1797,9 @@ clock-names = "iface", "bus"; power-domains = <&mmcc GPU_GDSC>; - - status = "disabled"; }; - mdp_smmu: arm,smmu@d00000 { + mdp_smmu: iommu@d00000 { compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; reg = <0xd00000 0x10000>; @@ -1325,11 +1813,9 @@ clock-names = "iface", "bus"; power-domains = <&mmcc MDSS_GDSC>; - - status = "disabled"; }; - lpass_q6_smmu: arm,smmu-lpass_q6@1600000 { + lpass_q6_smmu: iommu@1600000 { compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; reg = <0x1600000 0x20000>; #iommu-cells = <1>; @@ -1353,7 +1839,6 @@ clocks = <&gcc GCC_HLOS1_VOTE_LPASS_CORE_SMMU_CLK>, <&gcc GCC_HLOS1_VOTE_LPASS_ADSP_SMMU_CLK>; clock-names = "iface", "bus"; - status = "disabled"; }; agnoc@0 { @@ -1674,7 +2159,7 @@ #interrupt-cells = <1>; clocks = <&mmcc MDSS_AHB_CLK>; - clock-names = "iface_clk"; + clock-names = "iface"; #address-cells = <1>; #size-cells = <1>; @@ -1693,11 +2178,11 @@ <&mmcc MDSS_MDP_CLK>, <&mmcc SMMU_MDP_AXI_CLK>, <&mmcc MDSS_VSYNC_CLK>; - clock-names = "iface_clk", - "bus_clk", - "core_clk", - "iommu_clk", - "vsync_clk"; + clock-names = "iface", + "bus", + "core", + "iommu", + "vsync"; iommus = <&mdp_smmu 0>; @@ -1732,11 +2217,11 @@ <&mmcc MDSS_HDMI_AHB_CLK>, <&mmcc MDSS_EXTPCLK_CLK>; clock-names = - "mdp_core_clk", - "iface_clk", - "core_clk", - "alt_iface_clk", - "extp_clk"; + "mdp_core", + "iface", + "core", + "alt_iface", + "extp"; phys = <&hdmi_phy>; phy-names = "hdmi_phy"; @@ -1773,8 +2258,76 @@ clocks = <&mmcc MDSS_AHB_CLK>, <&gcc GCC_HDMI_CLKREF_CLK>; - clock-names = "iface_clk", - "ref_clk"; + clock-names = "iface", + "ref"; + }; + }; + + venus_smmu: arm,smmu-venus@d40000 { + compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; + reg = <0xd40000 0x20000>; + #global-interrupts = <1>; + interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&mmcc MMAGIC_VIDEO_GDSC>; + clocks = <&mmcc SMMU_VIDEO_AHB_CLK>, + <&mmcc SMMU_VIDEO_AXI_CLK>; + clock-names = "iface", "bus"; + #iommu-cells = <1>; + status = "okay"; + }; + + video-codec@c00000 { + compatible = "qcom,msm8996-venus"; + reg = <0x00c00000 0xff000>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&mmcc VENUS_GDSC>; + clocks = <&mmcc VIDEO_CORE_CLK>, + <&mmcc VIDEO_AHB_CLK>, + <&mmcc VIDEO_AXI_CLK>, + <&mmcc VIDEO_MAXI_CLK>; + clock-names = "core", "iface", "bus", "mbus"; + iommus = <&venus_smmu 0x00>, + <&venus_smmu 0x01>, + <&venus_smmu 0x0a>, + <&venus_smmu 0x07>, + <&venus_smmu 0x0e>, + <&venus_smmu 0x0f>, + <&venus_smmu 0x08>, + <&venus_smmu 0x09>, + <&venus_smmu 0x0b>, + <&venus_smmu 0x0c>, + <&venus_smmu 0x0d>, + <&venus_smmu 0x10>, + <&venus_smmu 0x11>, + <&venus_smmu 0x21>, + <&venus_smmu 0x28>, + <&venus_smmu 0x29>, + <&venus_smmu 0x2b>, + <&venus_smmu 0x2c>, + <&venus_smmu 0x2d>, + <&venus_smmu 0x31>; + memory-region = <&venus_region>; + status = "okay"; + + video-decoder { + compatible = "venus-decoder"; + clocks = <&mmcc VIDEO_SUBCORE0_CLK>; + clock-names = "core"; + power-domains = <&mmcc VENUS_CORE0_GDSC>; + }; + + video-encoder { + compatible = "venus-encoder"; + clocks = <&mmcc VIDEO_SUBCORE1_CLK>; + clock-names = "core"; + power-domains = <&mmcc VENUS_CORE1_GDSC>; }; }; }; @@ -1814,7 +2367,7 @@ power-domains = <&gcc HLOS1_VOTE_LPASS_ADSP_GDSC>; compatible = "qcom,apr-v2"; qcom,smd-channels = "apr_audio_svc"; - reg = <APR_DOMAIN_ADSP>; + qcom,apr-domain = <APR_DOMAIN_ADSP>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dts b/arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dts new file mode 100644 index 000000000000..db5821be1e2f --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dts @@ -0,0 +1,47 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2019, Jeffrey Hugo. All rights reserved. */ + +/dts-v1/; + +#include "msm8998-clamshell.dtsi" + +/ { + model = "Asus NovaGo TP370QL"; + compatible = "asus,novago-tp370ql", "qcom,msm8998"; +}; + +&blsp1_i2c6 { + status = "okay"; + + touchpad@15 { + compatible = "hid-over-i2c"; + interrupt-parent = <&tlmm>; + interrupts = <0x7b IRQ_TYPE_LEVEL_LOW>; + reg = <0x15>; + hid-descr-addr = <0x0001>; + + pinctrl-names = "default"; + pinctrl-0 = <&touchpad>; + }; + + keyboard@3a { + compatible = "hid-over-i2c"; + interrupt-parent = <&tlmm>; + interrupts = <0x25 IRQ_TYPE_LEVEL_LOW>; + reg = <0x3a>; + hid-descr-addr = <0x0001>; + }; +}; + +&sdhc2 { + cd-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>; +}; + +&tlmm { + touchpad: touchpad { + config { + pins = "gpio123"; + bias-pull-up; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi new file mode 100644 index 000000000000..9682d4dd7496 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi @@ -0,0 +1,240 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2019, Jeffrey Hugo. All rights reserved. */ + +/* + * Common include for MSM8998 clamshell devices, ie the Lenovo Miix 630, + * Asus NovaGo TP370QL, and HP Envy x2. All three devices are basically the + * same, with differences in peripherals. + */ + +#include "msm8998.dtsi" +#include "pm8998.dtsi" +#include "pm8005.dtsi" + +/ { + chosen { + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-always-on; + regulator-boot-on; + }; +}; + +&qusb2phy { + status = "okay"; + + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; +}; + +&rpm_requests { + pm8998-regulators { + compatible = "qcom,rpm-pm8998-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_s8-supply = <&vph_pwr>; + vdd_s9-supply = <&vph_pwr>; + vdd_s10-supply = <&vph_pwr>; + vdd_s11-supply = <&vph_pwr>; + vdd_s12-supply = <&vph_pwr>; + vdd_s13-supply = <&vph_pwr>; + vdd_l1_l27-supply = <&vreg_s7a_1p025>; + vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>; + vdd_l3_l11-supply = <&vreg_s7a_1p025>; + vdd_l4_l5-supply = <&vreg_s7a_1p025>; + vdd_l6-supply = <&vreg_s5a_2p04>; + vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>; + vdd_l9-supply = <&vph_pwr>; + vdd_l10_l23_l25-supply = <&vph_pwr>; + vdd_l13_l19_l21-supply = <&vph_pwr>; + vdd_l16_l28-supply = <&vph_pwr>; + vdd_l18_l22-supply = <&vph_pwr>; + vdd_l20_l24-supply = <&vph_pwr>; + vdd_l26-supply = <&vreg_s3a_1p35>; + vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>; + + vreg_s3a_1p35: s3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + vreg_s4a_1p8: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + }; + vreg_s5a_2p04: s5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2040000>; + }; + vreg_s7a_1p025: s7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1028000>; + }; + vreg_l1a_0p875: l1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-allow-set-load; + }; + vreg_l2a_1p2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-allow-set-load; + }; + vreg_l3a_1p0: l3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + vreg_l5a_0p8: l5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + vreg_l6a_1p8: l6 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <1808000>; + }; + vreg_l7a_1p8: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l8a_1p2: l8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + vreg_l9a_1p8: l9 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + vreg_l10a_1p8: l10 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + vreg_l11a_1p0: l11 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + vreg_l12a_1p8: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l13a_2p95: l13 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + vreg_l14a_1p88: l14 { + regulator-min-microvolt = <1880000>; + regulator-max-microvolt = <1880000>; + }; + vreg_15a_1p8: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l16a_2p7: l16 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + }; + vreg_l17a_1p3: l17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + }; + vreg_l18a_2p7: l18 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + }; + vreg_l19a_3p0: l19 { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + }; + vreg_l20a_2p95: l20 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-allow-set-load; + }; + vreg_l21a_2p95: l21 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-allow-set-load; + regulator-system-load = <800000>; + }; + vreg_l22a_2p85: l22 { + regulator-min-microvolt = <2864000>; + regulator-max-microvolt = <2864000>; + }; + vreg_l23a_3p3: l23 { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3312000>; + }; + vreg_l24a_3p075: l24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + }; + vreg_l25a_3p3: l25 { + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3312000>; + }; + vreg_l26a_1p2: l26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + vreg_l28_3p0: l28 { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + }; + + vreg_lvs1a_1p8: lvs1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_lvs2a_1p8: lvs2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + }; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <81 4>; + + touchpad: touchpad { + config { + pins = "gpio123"; + bias-pull-up; /* pull up */ + }; + }; +}; + +&sdhc2 { + status = "okay"; + + vmmc-supply = <&vreg_l21a_2p95>; + vqmmc-supply = <&vreg_l13a_2p95>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; +}; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + dr_mode = "host"; /* Force to host until we have Type-C hooked up */ +}; + +&usb3phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l2a_1p2>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dts b/arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dts new file mode 100644 index 000000000000..24073127091f --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2019, Jeffrey Hugo. All rights reserved. */ + +/dts-v1/; + +#include "msm8998-clamshell.dtsi" + +/ { + model = "HP Envy x2"; + compatible = "hp,envy-x2", "qcom,msm8998"; +}; + +&blsp1_i2c6 { + status = "okay"; + + keyboard@3a { + compatible = "hid-over-i2c"; + interrupt-parent = <&tlmm>; + interrupts = <0x79 IRQ_TYPE_LEVEL_LOW>; + reg = <0x3a>; + hid-descr-addr = <0x0001>; + + pinctrl-names = "default"; + pinctrl-0 = <&touchpad>; + }; +}; + +&sdhc2 { + cd-gpios = <&tlmm 95 GPIO_ACTIVE_LOW>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts b/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts new file mode 100644 index 000000000000..407c6a32911c --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2019, Jeffrey Hugo. All rights reserved. */ + +/dts-v1/; + +#include "msm8998-clamshell.dtsi" + +/ { + model = "Lenovo Miix 630"; + compatible = "lenovo,miix-630", "qcom,msm8998"; +}; + +&blsp1_i2c6 { + status = "okay"; + + keyboard@3a { + compatible = "hid-over-i2c"; + interrupt-parent = <&tlmm>; + interrupts = <0x79 IRQ_TYPE_LEVEL_LOW>; + reg = <0x3a>; + hid-descr-addr = <0x0001>; + + pinctrl-names = "default"; + pinctrl-0 = <&touchpad>; + }; +}; + +&sdhc2 { + cd-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi index f09f3e03f708..108667ce4f31 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi @@ -27,6 +27,23 @@ status = "okay"; }; +&pm8005_lsid1 { + pm8005-regulators { + compatible = "qcom,pm8005-regulators"; + + vdd_s1-supply = <&vph_pwr>; + + pm8005_s1: s1 { /* VDD_GFX supply */ + regulator-min-microvolt = <524000>; + regulator-max-microvolt = <1100000>; + regulator-enable-ramp-delay = <500>; + + /* hack until we rig up the gpu consumer */ + regulator-always-on; + }; + }; +}; + &qusb2phy { status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index 574be78a936e..c6f81431983e 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -4,6 +4,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-msm8998.h> #include <dt-bindings/clock/qcom,rpmcc.h> +#include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/gpio/gpio.h> / { @@ -78,6 +79,7 @@ compatible = "arm,armv8"; reg = <0x0 0x0>; enable-method = "psci"; + cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; next-level-cache = <&L2_0>; L2_0: l2-cache { compatible = "arm,arch-cache"; @@ -96,6 +98,7 @@ compatible = "arm,armv8"; reg = <0x0 0x1>; enable-method = "psci"; + cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; next-level-cache = <&L2_0>; L1_I_1: l1-icache { compatible = "arm,arch-cache"; @@ -110,6 +113,7 @@ compatible = "arm,armv8"; reg = <0x0 0x2>; enable-method = "psci"; + cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; next-level-cache = <&L2_0>; L1_I_2: l1-icache { compatible = "arm,arch-cache"; @@ -124,6 +128,7 @@ compatible = "arm,armv8"; reg = <0x0 0x3>; enable-method = "psci"; + cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; next-level-cache = <&L2_0>; L1_I_3: l1-icache { compatible = "arm,arch-cache"; @@ -138,6 +143,7 @@ compatible = "arm,armv8"; reg = <0x0 0x100>; enable-method = "psci"; + cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; next-level-cache = <&L2_1>; L2_1: l2-cache { compatible = "arm,arch-cache"; @@ -156,6 +162,7 @@ compatible = "arm,armv8"; reg = <0x0 0x101>; enable-method = "psci"; + cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; next-level-cache = <&L2_1>; L1_I_101: l1-icache { compatible = "arm,arch-cache"; @@ -170,6 +177,7 @@ compatible = "arm,armv8"; reg = <0x0 0x102>; enable-method = "psci"; + cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; next-level-cache = <&L2_1>; L1_I_102: l1-icache { compatible = "arm,arch-cache"; @@ -184,6 +192,7 @@ compatible = "arm,armv8"; reg = <0x0 0x103>; enable-method = "psci"; + cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; next-level-cache = <&L2_1>; L1_I_103: l1-icache { compatible = "arm,arch-cache"; @@ -230,6 +239,48 @@ }; }; }; + + idle-states { + entry-method = "psci"; + + LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "little-retention"; + arm,psci-suspend-param = <0x00000002>; + entry-latency-us = <81>; + exit-latency-us = <86>; + min-residency-us = <200>; + }; + + LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 { + compatible = "arm,idle-state"; + idle-state-name = "little-power-collapse"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <273>; + exit-latency-us = <612>; + min-residency-us = <1000>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "big-retention"; + arm,psci-suspend-param = <0x00000002>; + entry-latency-us = <79>; + exit-latency-us = <82>; + min-residency-us = <200>; + }; + + BIG_CPU_SLEEP_1: cpu-sleep-1-1 { + compatible = "arm,idle-state"; + idle-state-name = "big-power-collapse"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <336>; + exit-latency-us = <525>; + min-residency-us = <1000>; + local-timer-stop; + }; + }; }; firmware { @@ -264,6 +315,56 @@ compatible = "qcom,rpmcc-msm8998", "qcom,rpmcc"; #clock-cells = <1>; }; + + rpmpd: power-controller { + compatible = "qcom,msm8998-rpmpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmpd_opp_table>; + + rpmpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmpd_opp_ret: opp1 { + opp-level = <16>; + }; + + rpmpd_opp_ret_plus: opp2 { + opp-level = <32>; + }; + + rpmpd_opp_min_svs: opp3 { + opp-level = <48>; + }; + + rpmpd_opp_low_svs: opp4 { + opp-level = <64>; + }; + + rpmpd_opp_svs: opp5 { + opp-level = <128>; + }; + + rpmpd_opp_svs_plus: opp6 { + opp-level = <192>; + }; + + rpmpd_opp_nom: opp7 { + opp-level = <256>; + }; + + rpmpd_opp_nom_plus: opp8 { + opp-level = <320>; + }; + + rpmpd_opp_turbo: opp9 { + opp-level = <384>; + }; + + rpmpd_opp_turbo_plus: opp10 { + opp-level = <512>; + }; + }; + }; }; }; @@ -686,14 +787,22 @@ ranges = <0 0 0 0xffffffff>; compatible = "simple-bus"; - rpm_msg_ram: memory@68000 { + gcc: clock-controller@100000 { + compatible = "qcom,gcc-msm8998"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0x00100000 0xb0000>; + }; + + rpm_msg_ram: memory@778000 { compatible = "qcom,rpm-msg-ram"; - reg = <0x778000 0x7000>; + reg = <0x00778000 0x7000>; }; qfprom: qfprom@780000 { compatible = "qcom,qfprom"; - reg = <0x780000 0x621c>; + reg = <0x00780000 0x621c>; #address-cells = <1>; #size-cells = <1>; @@ -703,17 +812,185 @@ }; }; - gcc: clock-controller@100000 { - compatible = "qcom,gcc-msm8998"; - #clock-cells = <1>; + tsens0: thermal@10ab000 { + compatible = "qcom,msm8998-tsens", "qcom,tsens-v2"; + reg = <0x010ab000 0x1000>, /* TM */ + <0x010aa000 0x1000>; /* SROT */ + + #qcom,sensors = <14>; + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal@10ae000 { + compatible = "qcom,msm8998-tsens", "qcom,tsens-v2"; + reg = <0x010ae000 0x1000>, /* TM */ + <0x010ad000 0x1000>; /* SROT */ + + #qcom,sensors = <8>; + #thermal-sensor-cells = <1>; + }; + + anoc1_smmu: iommu@1680000 { + compatible = "qcom,msm8998-smmu-v2", "qcom,smmu-v2"; + reg = <0x01680000 0x10000>; + #iommu-cells = <1>; + + #global-interrupts = <0>; + interrupts = + <GIC_SPI 364 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 365 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 366 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 367 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 368 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 369 IRQ_TYPE_EDGE_RISING>; + }; + + pcie0: pci@1c00000 { + compatible = "qcom,pcie-msm8996"; + reg = <0x01c00000 0x2000>, + <0x1b000000 0xf1d>, + <0x1b000f20 0xa8>, + <0x1b100000 0x100000>; + reg-names = "parf", "dbi", "elbi", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + #address-cells = <3>; + #size-cells = <2>; + num-lanes = <1>; + phys = <&pciephy>; + phy-names = "pciephy"; + + ranges = <0x01000000 0x0 0x1b200000 0x1b200000 0x0 0x100000>, + <0x02000000 0x0 0x1b300000 0x1b300000 0x0 0xd00000>; + + #interrupt-cells = <1>; + interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 135 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 136 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 138 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 139 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_AUX_CLK>; + clock-names = "pipe", "bus_master", "bus_slave", "cfg", "aux"; + + power-domains = <&gcc PCIE_0_GDSC>; + iommu-map = <0x100 &anoc1_smmu 0x1480 1>; + perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; + }; + + phy@1c06000 { + compatible = "qcom,msm8998-qmp-pcie-phy"; + reg = <0x01c06000 0x18c>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_CLKREF_CLK>; + clock-names = "aux", "cfg_ahb", "ref"; + + resets = <&gcc GCC_PCIE_0_PHY_BCR>, <&gcc GCC_PCIE_PHY_BCR>; + reset-names = "phy", "common"; + + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l2a_1p2>; + + pciephy: lane@1c06800 { + reg = <0x01c06200 0x128>, <0x01c06400 0x1fc>, <0x01c06800 0x20c>; + #phy-cells = <0>; + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "pcie_0_pipe_clk_src"; + #clock-cells = <0>; + }; + }; + + ufshc: ufshc@1da4000 { + compatible = "qcom,msm8998-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; + reg = <0x01da4000 0x2500>; + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; + phys = <&ufsphy_lanes>; + phy-names = "ufsphy"; + lanes-per-direction = <2>; + power-domains = <&gcc UFS_GDSC>; #reset-cells = <1>; - #power-domain-cells = <1>; - reg = <0x100000 0xb0000>; + + clock-names = + "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk"; + clocks = + <&gcc GCC_UFS_AXI_CLK>, + <&gcc GCC_AGGRE1_UFS_AXI_CLK>, + <&gcc GCC_UFS_AHB_CLK>, + <&gcc GCC_UFS_UNIPRO_CORE_CLK>, + <&rpmcc RPM_SMD_LN_BB_CLK1>, + <&gcc GCC_UFS_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_RX_SYMBOL_1_CLK>; + freq-table-hz = + <50000000 200000000>, + <0 0>, + <0 0>, + <37500000 150000000>, + <0 0>, + <0 0>, + <0 0>, + <0 0>; + + resets = <&gcc GCC_UFS_BCR>; + reset-names = "rst"; + }; + + ufsphy: phy@1da7000 { + compatible = "qcom,msm8998-qmp-ufs-phy"; + reg = <0x01da7000 0x18c>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clock-names = + "ref", + "ref_aux"; + clocks = + <&gcc GCC_UFS_CLKREF_CLK>, + <&gcc GCC_UFS_PHY_AUX_CLK>; + + reset-names = "ufsphy"; + resets = <&ufshc 0>; + + ufsphy_lanes: lanes@1da7400 { + reg = <0x01da7400 0x128>, + <0x01da7600 0x1fc>, + <0x01da7c00 0x1dc>, + <0x01da7800 0x128>, + <0x01da7a00 0x1fc>; + #phy-cells = <0>; + }; + }; + + tcsr_mutex_regs: syscon@1f40000 { + compatible = "syscon"; + reg = <0x01f40000 0x20000>; }; tlmm: pinctrl@3400000 { compatible = "qcom,msm8998-pinctrl"; - reg = <0x3400000 0xc00000>; + reg = <0x03400000 0xc00000>; interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; #gpio-cells = <0x2>; @@ -721,13 +998,448 @@ #interrupt-cells = <0x2>; }; + stm@6002000 { + compatible = "arm,coresight-stm", "arm,primecell"; + reg = <0x06002000 0x1000>, + <0x16280000 0x180000>; + reg-names = "stm-base", "stm-data-base"; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + out-ports { + port { + stm_out: endpoint { + remote-endpoint = <&funnel0_in7>; + }; + }; + }; + }; + + funnel@6041000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x06041000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + out-ports { + port { + funnel0_out: endpoint { + remote-endpoint = + <&merge_funnel_in0>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@7 { + reg = <7>; + funnel0_in7: endpoint { + remote-endpoint = <&stm_out>; + }; + }; + }; + }; + + funnel@6042000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x06042000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + out-ports { + port { + funnel1_out: endpoint { + remote-endpoint = + <&merge_funnel_in1>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@6 { + reg = <6>; + funnel1_in6: endpoint { + remote-endpoint = + <&apss_merge_funnel_out>; + }; + }; + }; + }; + + funnel@6045000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x06045000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + out-ports { + port { + merge_funnel_out: endpoint { + remote-endpoint = + <&etf_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + merge_funnel_in0: endpoint { + remote-endpoint = + <&funnel0_out>; + }; + }; + + port@1 { + reg = <1>; + merge_funnel_in1: endpoint { + remote-endpoint = + <&funnel1_out>; + }; + }; + }; + }; + + replicator@6046000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0x06046000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + out-ports { + port { + replicator_out: endpoint { + remote-endpoint = <&etr_in>; + }; + }; + }; + + in-ports { + port { + replicator_in: endpoint { + remote-endpoint = <&etf_out>; + }; + }; + }; + }; + + etf@6047000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x06047000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + out-ports { + port { + etf_out: endpoint { + remote-endpoint = + <&replicator_in>; + }; + }; + }; + + in-ports { + port { + etf_in: endpoint { + remote-endpoint = + <&merge_funnel_out>; + }; + }; + }; + }; + + etr@6048000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x06048000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + arm,scatter-gather; + + in-ports { + port { + etr_in: endpoint { + remote-endpoint = + <&replicator_out>; + }; + }; + }; + }; + + etm@7840000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x07840000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU0>; + + out-ports { + port { + etm0_out: endpoint { + remote-endpoint = + <&apss_funnel_in0>; + }; + }; + }; + }; + + etm@7940000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x07940000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU1>; + + out-ports { + port { + etm1_out: endpoint { + remote-endpoint = + <&apss_funnel_in1>; + }; + }; + }; + }; + + etm@7a40000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x07a40000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU2>; + + out-ports { + port { + etm2_out: endpoint { + remote-endpoint = + <&apss_funnel_in2>; + }; + }; + }; + }; + + etm@7b40000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x07b40000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU3>; + + out-ports { + port { + etm3_out: endpoint { + remote-endpoint = + <&apss_funnel_in3>; + }; + }; + }; + }; + + funnel@7b60000 { /* APSS Funnel */ + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x07b60000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + out-ports { + port { + apss_funnel_out: endpoint { + remote-endpoint = + <&apss_merge_funnel_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + apss_funnel_in0: endpoint { + remote-endpoint = + <&etm0_out>; + }; + }; + + port@1 { + reg = <1>; + apss_funnel_in1: endpoint { + remote-endpoint = + <&etm1_out>; + }; + }; + + port@2 { + reg = <2>; + apss_funnel_in2: endpoint { + remote-endpoint = + <&etm2_out>; + }; + }; + + port@3 { + reg = <3>; + apss_funnel_in3: endpoint { + remote-endpoint = + <&etm3_out>; + }; + }; + + port@4 { + reg = <4>; + apss_funnel_in4: endpoint { + remote-endpoint = + <&etm4_out>; + }; + }; + + port@5 { + reg = <5>; + apss_funnel_in5: endpoint { + remote-endpoint = + <&etm5_out>; + }; + }; + + port@6 { + reg = <6>; + apss_funnel_in6: endpoint { + remote-endpoint = + <&etm6_out>; + }; + }; + + port@7 { + reg = <7>; + apss_funnel_in7: endpoint { + remote-endpoint = + <&etm7_out>; + }; + }; + }; + }; + + funnel@7b70000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x07b70000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + out-ports { + port { + apss_merge_funnel_out: endpoint { + remote-endpoint = + <&funnel1_in6>; + }; + }; + }; + + in-ports { + port { + apss_merge_funnel_in: endpoint { + remote-endpoint = + <&apss_funnel_out>; + }; + }; + }; + }; + + etm@7c40000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x07c40000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU4>; + + port{ + etm4_out: endpoint { + remote-endpoint = <&apss_funnel_in4>; + }; + }; + }; + + etm@7d40000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x07d40000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU5>; + + port{ + etm5_out: endpoint { + remote-endpoint = <&apss_funnel_in5>; + }; + }; + }; + + etm@7e40000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x07e40000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU6>; + + port{ + etm6_out: endpoint { + remote-endpoint = <&apss_funnel_in6>; + }; + }; + }; + + etm@7f40000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x07f40000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU7>; + + port{ + etm7_out: endpoint { + remote-endpoint = <&apss_funnel_in7>; + }; + }; + }; + spmi_bus: spmi@800f000 { compatible = "qcom,spmi-pmic-arb"; - reg = <0x800f000 0x1000>, - <0x8400000 0x1000000>, - <0x9400000 0x1000000>, - <0xa400000 0x220000>, - <0x800a000 0x3000>; + reg = <0x0800f000 0x1000>, + <0x08400000 0x1000000>, + <0x09400000 0x1000000>, + <0x0a400000 0x220000>, + <0x0800a000 0x3000>; reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; interrupt-names = "periph_irq"; interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>; @@ -740,36 +1452,6 @@ cell-index = <0>; }; - tsens0: thermal@10ab000 { - compatible = "qcom,msm8998-tsens", "qcom,tsens-v2"; - reg = <0x10ab000 0x1000>, /* TM */ - <0x10aa000 0x1000>; /* SROT */ - - #qcom,sensors = <14>; - #thermal-sensor-cells = <1>; - }; - - tsens1: thermal@10ae000 { - compatible = "qcom,msm8998-tsens", "qcom,tsens-v2"; - reg = <0x10ae000 0x1000>, /* TM */ - <0x10ad000 0x1000>; /* SROT */ - - #qcom,sensors = <8>; - #thermal-sensor-cells = <1>; - }; - - tcsr_mutex_regs: syscon@1f40000 { - compatible = "syscon"; - reg = <0x1f40000 0x20000>; - }; - - apcs_glb: mailbox@9820000 { - compatible = "qcom,msm8998-apcs-hmss-global"; - reg = <0x17911000 0x1000>; - - #mbox-cells = <1>; - }; - usb3: usb@a8f8800 { compatible = "qcom,msm8998-dwc3", "qcom,dwc3"; reg = <0x0a8f8800 0x400>; @@ -859,7 +1541,7 @@ sdhc2: sdhci@c0a4900 { compatible = "qcom,sdhci-msm-v4"; - reg = <0xc0a4900 0x314>, <0xc0a4000 0x800>; + reg = <0x0c0a4900 0x314>, <0x0c0a4000 0x800>; reg-names = "hc_mem", "core_mem"; interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, @@ -964,6 +1646,16 @@ #size-cells = <0>; }; + blsp2_uart1: serial@c1b0000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x0c1b0000 0x1000>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + blsp2_i2c0: i2c@c1b5000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x0c1b5000 0x600>; @@ -1054,14 +1746,11 @@ #size-cells = <0>; }; - blsp2_uart1: serial@c1b0000 { - compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; - reg = <0xc1b0000 0x1000>; - interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, - <&gcc GCC_BLSP2_AHB_CLK>; - clock-names = "core", "iface"; - status = "disabled"; + apcs_glb: mailbox@17911000 { + compatible = "qcom,msm8998-apcs-hmss-global"; + reg = <0x17911000 0x1000>; + + #mbox-cells = <1>; }; timer@17920000 { @@ -1135,75 +1824,6 @@ redistributor-stride = <0x0 0x20000>; interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; }; - - ufshc: ufshc@1da4000 { - compatible = "qcom,msm8998-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; - reg = <0x01da4000 0x2500>; - interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; - phys = <&ufsphy_lanes>; - phy-names = "ufsphy"; - lanes-per-direction = <2>; - power-domains = <&gcc UFS_GDSC>; - #reset-cells = <1>; - - clock-names = - "core_clk", - "bus_aggr_clk", - "iface_clk", - "core_clk_unipro", - "ref_clk", - "tx_lane0_sync_clk", - "rx_lane0_sync_clk", - "rx_lane1_sync_clk"; - clocks = - <&gcc GCC_UFS_AXI_CLK>, - <&gcc GCC_AGGRE1_UFS_AXI_CLK>, - <&gcc GCC_UFS_AHB_CLK>, - <&gcc GCC_UFS_UNIPRO_CORE_CLK>, - <&rpmcc RPM_SMD_LN_BB_CLK1>, - <&gcc GCC_UFS_TX_SYMBOL_0_CLK>, - <&gcc GCC_UFS_RX_SYMBOL_0_CLK>, - <&gcc GCC_UFS_RX_SYMBOL_1_CLK>; - freq-table-hz = - <50000000 200000000>, - <0 0>, - <0 0>, - <37500000 150000000>, - <0 0>, - <0 0>, - <0 0>, - <0 0>; - - resets = <&gcc GCC_UFS_BCR>; - reset-names = "rst"; - }; - - ufsphy: phy@1da7000 { - compatible = "qcom,msm8998-qmp-ufs-phy"; - reg = <0x01da7000 0x18c>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - clock-names = - "ref", - "ref_aux"; - clocks = - <&gcc GCC_UFS_CLKREF_CLK>, - <&gcc GCC_UFS_PHY_AUX_CLK>; - - reset-names = "ufsphy"; - resets = <&ufshc 0>; - - ufsphy_lanes: lanes@1da7400 { - reg = <0x01da7400 0x128>, - <0x01da7600 0x1fc>, - <0x01da7c00 0x1dc>, - <0x01da7800 0x128>, - <0x01da7a00 0x1fc>; - #phy-cells = <0>; - }; - }; }; }; diff --git a/arch/arm64/boot/dts/qcom/pm8150.dtsi b/arch/arm64/boot/dts/qcom/pm8150.dtsi new file mode 100644 index 000000000000..b6e304748a57 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm8150.dtsi @@ -0,0 +1,97 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved. + * Copyright (c) 2019, Linaro Limited + */ + +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> +#include <dt-bindings/iio/qcom,spmi-vadc.h> + +&spmi_bus { + pm8150_0: pmic@0 { + compatible = "qcom,pm8150", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pon: power-on@800 { + compatible = "qcom,pm8916-pon"; + reg = <0x0800>; + pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0x0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_POWER>; + + status = "disabled"; + }; + }; + + pm8150_adc: adc@3100 { + compatible = "qcom,spmi-adc5"; + reg = <0x3100>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + + status = "disabled"; + + ref-gnd@0 { + reg = <ADC5_REF_GND>; + qcom,pre-scaling = <1 1>; + label = "ref_gnd"; + }; + + vref-1p25@1 { + reg = <ADC5_1P25VREF>; + qcom,pre-scaling = <1 1>; + label = "vref_1p25"; + }; + + die-temp@6 { + reg = <ADC5_DIE_TEMP>; + qcom,pre-scaling = <1 1>; + label = "die_temp"; + }; + }; + + rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>; + + status = "disabled"; + }; + + pm8150_gpios: gpio@c000 { + compatible = "qcom,pm8150-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <0x0 0xc0 0x0 IRQ_TYPE_NONE>, + <0x0 0xc1 0x0 IRQ_TYPE_NONE>, + <0x0 0xc2 0x0 IRQ_TYPE_NONE>, + <0x0 0xc3 0x0 IRQ_TYPE_NONE>, + <0x0 0xc4 0x0 IRQ_TYPE_NONE>, + <0x0 0xc5 0x0 IRQ_TYPE_NONE>, + <0x0 0xc6 0x0 IRQ_TYPE_NONE>, + <0x0 0xc7 0x0 IRQ_TYPE_NONE>, + <0x0 0xc8 0x0 IRQ_TYPE_NONE>, + <0x0 0xc9 0x0 IRQ_TYPE_NONE>, + <0x0 0xca 0x0 IRQ_TYPE_NONE>, + <0x0 0xcb 0x0 IRQ_TYPE_NONE>; + }; + }; + + pmic@1 { + compatible = "qcom,pm8150", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi new file mode 100644 index 000000000000..322379d5c31f --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi @@ -0,0 +1,86 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved. + * Copyright (c) 2019, Linaro Limited + */ + +#include <dt-bindings/iio/qcom,spmi-vadc.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +&spmi_bus { + pmic@2 { + compatible = "qcom,pm8150b", "qcom,spmi-pmic"; + reg = <0x2 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + power-on@800 { + compatible = "qcom,pm8916-pon"; + reg = <0x0800>; + + status = "disabled"; + }; + + adc@3100 { + compatible = "qcom,spmi-adc5"; + reg = <0x3100>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + + status = "disabled"; + + ref-gnd@0 { + reg = <ADC5_REF_GND>; + qcom,pre-scaling = <1 1>; + label = "ref_gnd"; + }; + + vref-1p25@1 { + reg = <ADC5_1P25VREF>; + qcom,pre-scaling = <1 1>; + label = "vref_1p25"; + }; + + die-temp@6 { + reg = <ADC5_DIE_TEMP>; + qcom,pre-scaling = <1 1>; + label = "die_temp"; + }; + + chg-temp@9 { + reg = <ADC5_CHG_TEMP>; + qcom,pre-scaling = <1 1>; + label = "chg_temp"; + }; + }; + + pm8150b_gpios: gpio@c000 { + compatible = "qcom,pm8150b-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <0x2 0xc0 0x0 IRQ_TYPE_NONE>, + <0x2 0xc1 0x0 IRQ_TYPE_NONE>, + <0x2 0xc2 0x0 IRQ_TYPE_NONE>, + <0x2 0xc3 0x0 IRQ_TYPE_NONE>, + <0x2 0xc4 0x0 IRQ_TYPE_NONE>, + <0x2 0xc5 0x0 IRQ_TYPE_NONE>, + <0x2 0xc6 0x0 IRQ_TYPE_NONE>, + <0x2 0xc7 0x0 IRQ_TYPE_NONE>, + <0x2 0xc8 0x0 IRQ_TYPE_NONE>, + <0x2 0xc9 0x0 IRQ_TYPE_NONE>, + <0x2 0xca 0x0 IRQ_TYPE_NONE>, + <0x2 0xcb 0x0 IRQ_TYPE_NONE>; + }; + }; + + pmic@3 { + compatible = "qcom,pm8150b", "qcom,spmi-pmic"; + reg = <0x3 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm8150l.dtsi b/arch/arm64/boot/dts/qcom/pm8150l.dtsi new file mode 100644 index 000000000000..eb0e9a090e42 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm8150l.dtsi @@ -0,0 +1,80 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved. + * Copyright (c) 2019, Linaro Limited + */ + +#include <dt-bindings/iio/qcom,spmi-vadc.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +&spmi_bus { + pmic@4 { + compatible = "qcom,pm8150l", "qcom,spmi-pmic"; + reg = <0x4 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + power-on@800 { + compatible = "qcom,pm8916-pon"; + reg = <0x0800>; + + status = "disabled"; + }; + + adc@3100 { + compatible = "qcom,spmi-adc5"; + reg = <0x3100>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + interrupts = <0x4 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + + status = "disabled"; + + ref-gnd@0 { + reg = <ADC5_REF_GND>; + qcom,pre-scaling = <1 1>; + label = "ref_gnd"; + }; + + vref-1p25@1 { + reg = <ADC5_1P25VREF>; + qcom,pre-scaling = <1 1>; + label = "vref_1p25"; + }; + + die-temp@6 { + reg = <ADC5_DIE_TEMP>; + qcom,pre-scaling = <1 1>; + label = "die_temp"; + }; + }; + + pm8150l_gpios: gpio@c000 { + compatible = "qcom,pm8150l-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <0x4 0xc0 0x0 IRQ_TYPE_NONE>, + <0x4 0xc1 0x0 IRQ_TYPE_NONE>, + <0x4 0xc2 0x0 IRQ_TYPE_NONE>, + <0x4 0xc3 0x0 IRQ_TYPE_NONE>, + <0x4 0xc4 0x0 IRQ_TYPE_NONE>, + <0x4 0xc5 0x0 IRQ_TYPE_NONE>, + <0x4 0xc6 0x0 IRQ_TYPE_NONE>, + <0x4 0xc7 0x0 IRQ_TYPE_NONE>, + <0x4 0xc8 0x0 IRQ_TYPE_NONE>, + <0x4 0xc9 0x0 IRQ_TYPE_NONE>, + <0x4 0xca 0x0 IRQ_TYPE_NONE>, + <0x4 0xcb 0x0 IRQ_TYPE_NONE>; + }; + }; + + pmic@5 { + compatible = "qcom,pm8150l", "qcom,spmi-pmic"; + reg = <0x5 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi index d3ca35a940fb..dc2ce23cde05 100644 --- a/arch/arm64/boot/dts/qcom/pm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi @@ -39,7 +39,7 @@ #size-cells = <0>; pm8998_pon: pon@800 { - compatible = "qcom,pm8916-pon"; + compatible = "qcom,pm8998-pon"; reg = <0x800>; mode-bootloader = <0x2>; @@ -78,7 +78,7 @@ #size-cells = <0>; #io-channel-cells = <1>; - adc-chan@ADC5_DIE_TEMP { + adc-chan@6 { reg = <ADC5_DIE_TEMP>; label = "die_temp"; }; diff --git a/arch/arm64/boot/dts/qcom/pms405.dtsi b/arch/arm64/boot/dts/qcom/pms405.dtsi index e8e186bc1ea7..ff4005186895 100644 --- a/arch/arm64/boot/dts/qcom/pms405.dtsi +++ b/arch/arm64/boot/dts/qcom/pms405.dtsi @@ -88,38 +88,44 @@ #size-cells = <0>; #io-channel-cells = <1>; - ref_gnd { + ref_gnd@0 { reg = <ADC5_REF_GND>; qcom,pre-scaling = <1 1>; }; - vref_1p25 { + vref_1p25@1 { reg = <ADC5_1P25VREF>; qcom,pre-scaling = <1 1>; }; - vph_pwr { + pon_1: vph_pwr@131 { reg = <ADC5_VPH_PWR>; qcom,pre-scaling = <1 3>; }; - die_temp { + die_temp@6 { reg = <ADC5_DIE_TEMP>; qcom,pre-scaling = <1 1>; }; - xo_therm_100k_pu { - reg = <ADC5_XO_THERM_100K_PU>; + pa_therm1: thermistor1@77 { + reg = <ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; qcom,pre-scaling = <1 1>; }; - amux_thm1_100k_pu { - reg = <ADC5_AMUX_THM1_100K_PU>; + pa_therm3: thermistor3@79 { + reg = <ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; qcom,pre-scaling = <1 1>; }; - amux_thm3_100k_pu { - reg = <ADC5_AMUX_THM3_100K_PU>; + xo_therm: xo_temp@76 { + reg = <ADC5_XO_THERM_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; qcom,pre-scaling = <1 1>; }; }; @@ -135,8 +141,6 @@ pms405_1: pms405@1 { compatible = "qcom,spmi-pmic"; reg = <0x1 SPMI_USID>; - #address-cells = <1>; - #size-cells = <0>; pms405_spmi_regulators: regulators { compatible = "qcom,pms405-regulators"; diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi index 2c3127167e3c..501a7330dbc8 100644 --- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 // Copyright (c) 2018, Linaro Limited +#include <dt-bindings/gpio/gpio.h> #include "qcs404.dtsi" #include "pms405.dtsi" @@ -56,18 +57,43 @@ qcom,controlled-remotely; }; +&gcc { + protected-clocks = <GCC_BIMC_CDSP_CLK>, + <GCC_CDSP_CFG_AHB_CLK>, + <GCC_CDSP_BIMC_CLK_SRC>, + <GCC_CDSP_TBU_CLK>, + <141>, /* GCC_WCSS_Q6_AHB_CLK */ + <142>; /* GCC_WCSS_Q6_AXIM_CLK */ +}; + &pms405_spmi_regulators { - vdd_s3-supply = <&pms405_s3>; + vdd_s3-supply = <&vph_pwr>; pms405_s3: s3 { regulator-always-on; regulator-boot-on; regulator-name = "vdd_apc"; regulator-min-microvolt = <1048000>; - regulator-max-microvolt = <1352000>; + regulator-max-microvolt = <1384000>; }; }; +&pcie { + status = "ok"; + + perst-gpio = <&tlmm 43 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&perst_state>; +}; + +&pcie_phy { + status = "ok"; + + vdda-vp-supply = <&vreg_l3_1p05>; + vdda-vph-supply = <&vreg_l5_1p8>; +}; + &remoteproc_adsp { status = "ok"; }; @@ -118,7 +144,7 @@ }; vreg_l3_1p05: l3 { - regulator-min-microvolt = <1050000>; + regulator-min-microvolt = <1048000>; regulator-max-microvolt = <1160000>; }; @@ -184,6 +210,15 @@ }; &tlmm { + perst_state: perst { + pins = "gpio43"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + output-low; + }; + sdc1_on: sdc1-on { clk { pins = "sdc1_clk"; @@ -200,7 +235,7 @@ data { pins = "sdc1_data"; bias-pull-up; - dreive-strength = <10>; + drive-strength = <10>; }; rclk { @@ -225,7 +260,7 @@ data { pins = "sdc1_data"; bias-pull-up; - dreive-strength = <2>; + drive-strength = <2>; }; rclk { @@ -237,6 +272,9 @@ &wifi { status = "okay"; + vdd-0.8-cx-mx-supply = <&vreg_l2_1p275>; + vdd-1.8-xo-supply = <&vreg_l5_1p8>; + vdd-1.3-rfa-supply = <&vreg_l1_1p3>; }; /* PINCTRL - additions to nodes defined in qcs404.dtsi */ diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi index ffedf9640af7..a97eeb4569c0 100644 --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi @@ -3,7 +3,10 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-qcs404.h> +#include <dt-bindings/clock/qcom,turingcc-qcs404.h> #include <dt-bindings/clock/qcom,rpmcc.h> +#include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/thermal/thermal.h> / { interrupt-parent = <&intc>; @@ -30,7 +33,9 @@ compatible = "arm,cortex-a53"; reg = <0x100>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; next-level-cache = <&L2_0>; + #cooling-cells = <2>; }; CPU1: cpu@101 { @@ -38,7 +43,9 @@ compatible = "arm,cortex-a53"; reg = <0x101>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; next-level-cache = <&L2_0>; + #cooling-cells = <2>; }; CPU2: cpu@102 { @@ -46,7 +53,9 @@ compatible = "arm,cortex-a53"; reg = <0x102>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; next-level-cache = <&L2_0>; + #cooling-cells = <2>; }; CPU3: cpu@103 { @@ -54,13 +63,29 @@ compatible = "arm,cortex-a53"; reg = <0x103>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; next-level-cache = <&L2_0>; + #cooling-cells = <2>; }; L2_0: l2-cache { compatible = "cache"; cache-level = <2>; }; + + idle-states { + entry-method = "psci"; + + CPU_SLEEP_0: cpu-sleep-0 { + compatible = "arm,idle-state"; + idle-state-name = "standalone-power-collapse"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <125>; + exit-latency-us = <180>; + min-residency-us = <595>; + local-timer-stop; + }; + }; }; firmware { @@ -81,106 +106,18 @@ method = "smc"; }; - remoteproc_adsp: remoteproc-adsp { - compatible = "qcom,qcs404-adsp-pas"; - - interrupts-extended = <&intc GIC_SPI 293 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", "fatal", "ready", - "handover", "stop-ack"; - - clocks = <&xo_board>; - clock-names = "xo"; - - memory-region = <&adsp_fw_mem>; - - qcom,smem-states = <&adsp_smp2p_out 0>; - qcom,smem-state-names = "stop"; - - status = "disabled"; - - glink-edge { - interrupts = <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>; - - qcom,remote-pid = <2>; - mboxes = <&apcs_glb 8>; - - label = "adsp"; - }; - }; - - remoteproc_cdsp: remoteproc-cdsp { - compatible = "qcom,qcs404-cdsp-pas"; - - interrupts-extended = <&intc GIC_SPI 229 IRQ_TYPE_EDGE_RISING>, - <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, - <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, - <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, - <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", "fatal", "ready", - "handover", "stop-ack"; - - clocks = <&xo_board>; - clock-names = "xo"; - - memory-region = <&cdsp_fw_mem>; - - qcom,smem-states = <&cdsp_smp2p_out 0>; - qcom,smem-state-names = "stop"; - - status = "disabled"; - - glink-edge { - interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>; - - qcom,remote-pid = <5>; - mboxes = <&apcs_glb 12>; - - label = "cdsp"; - }; - }; - - remoteproc_wcss: remoteproc-wcss { - compatible = "qcom,qcs404-wcss-pas"; - - interrupts-extended = <&intc GIC_SPI 153 IRQ_TYPE_EDGE_RISING>, - <&wcss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, - <&wcss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, - <&wcss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, - <&wcss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", "fatal", "ready", - "handover", "stop-ack"; - - clocks = <&xo_board>; - clock-names = "xo"; - - memory-region = <&wlan_fw_mem>; - - qcom,smem-states = <&wcss_smp2p_out 0>; - qcom,smem-state-names = "stop"; - - status = "disabled"; - - glink-edge { - interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>; - - qcom,remote-pid = <1>; - mboxes = <&apcs_glb 16>; - - label = "wcss"; - }; - }; - reserved-memory { #address-cells = <2>; #size-cells = <2>; ranges; - memory@85600000 { - reg = <0 0x85600000 0 0x90000>; + tz_apps_mem: memory@85900000 { + reg = <0 0x85900000 0 0x500000>; + no-map; + }; + + xbl_mem: memory@85e00000 { + reg = <0 0x85e00000 0 0x100000>; no-map; }; @@ -189,28 +126,33 @@ no-map; }; - memory@86100000 { + tz_mem: memory@86100000 { reg = <0 0x86100000 0 0x300000>; no-map; }; wlan_fw_mem: memory@86400000 { - reg = <0 0x86400000 0 0x1c00000>; + reg = <0 0x86400000 0 0x1100000>; + no-map; + }; + + adsp_fw_mem: memory@87500000 { + reg = <0 0x87500000 0 0x1a00000>; no-map; }; - adsp_fw_mem: memory@88000000 { - reg = <0 0x88000000 0 0x1a00000>; + cdsp_fw_mem: memory@88f00000 { + reg = <0 0x88f00000 0 0x600000>; no-map; }; - cdsp_fw_mem: memory@89a00000 { - reg = <0 0x89a00000 0 0x600000>; + wlan_msa_mem: memory@89500000 { + reg = <0 0x89500000 0 0x100000>; no-map; }; - wlan_msa_mem: memory@8a000000 { - reg = <0 0x8a000000 0 0x100000>; + uefi_mem: memory@9f800000 { + reg = <0 0x9f800000 0 0x800000>; no-map; }; }; @@ -230,6 +172,60 @@ compatible = "qcom,rpmcc-qcs404"; #clock-cells = <1>; }; + + rpmpd: power-controller { + compatible = "qcom,qcs404-rpmpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmpd_opp_table>; + + rpmpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmpd_opp_ret: opp1 { + opp-level = <16>; + }; + + rpmpd_opp_ret_plus: opp2 { + opp-level = <32>; + }; + + rpmpd_opp_min_svs: opp3 { + opp-level = <48>; + }; + + rpmpd_opp_low_svs: opp4 { + opp-level = <64>; + }; + + rpmpd_opp_svs: opp5 { + opp-level = <128>; + }; + + rpmpd_opp_svs_plus: opp6 { + opp-level = <192>; + }; + + rpmpd_opp_nom: opp7 { + opp-level = <256>; + }; + + rpmpd_opp_nom_plus: opp8 { + opp-level = <320>; + }; + + rpmpd_opp_turbo: opp9 { + opp-level = <384>; + }; + + rpmpd_opp_turbo_no_cpr: opp10 { + opp-level = <416>; + }; + + rpmpd_opp_turbo_plus: opp11 { + opp-level = <512>; + }; + }; + }; }; }; @@ -254,11 +250,32 @@ ranges = <0 0 0 0xffffffff>; compatible = "simple-bus"; + turingcc: clock-controller@800000 { + compatible = "qcom,qcs404-turingcc"; + reg = <0x00800000 0x30000>; + clocks = <&gcc GCC_CDSP_CFG_AHB_CLK>; + + #clock-cells = <1>; + #reset-cells = <1>; + + status = "disabled"; + }; + rpm_msg_ram: memory@60000 { compatible = "qcom,rpm-msg-ram"; reg = <0x00060000 0x6000>; }; + qfprom: qfprom@a4000 { + compatible = "qcom,qfprom"; + reg = <0x000a4000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + tsens_caldata: caldata@d0 { + reg = <0x1f8 0x14>; + }; + }; + rng: rng@e3000 { compatible = "qcom,prng-ee"; reg = <0x000e3000 0x1000>; @@ -266,6 +283,67 @@ clock-names = "core"; }; + tsens: thermal-sensor@4a9000 { + compatible = "qcom,qcs404-tsens", "qcom,tsens-v1"; + reg = <0x004a9000 0x1000>, /* TM */ + <0x004a8000 0x1000>; /* SROT */ + nvmem-cells = <&tsens_caldata>; + nvmem-cell-names = "calib"; + #qcom,sensors = <10>; + #thermal-sensor-cells = <1>; + }; + + remoteproc_cdsp: remoteproc@b00000 { + compatible = "qcom,qcs404-cdsp-pas"; + reg = <0x00b00000 0x4040>; + + interrupts-extended = <&intc GIC_SPI 229 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&xo_board>, + <&gcc GCC_CDSP_CFG_AHB_CLK>, + <&gcc GCC_CDSP_TBU_CLK>, + <&gcc GCC_BIMC_CDSP_CLK>, + <&turingcc TURING_WRAPPER_AON_CLK>, + <&turingcc TURING_Q6SS_AHBS_AON_CLK>, + <&turingcc TURING_Q6SS_AHBM_AON_CLK>, + <&turingcc TURING_Q6SS_Q6_AXIM_CLK>; + clock-names = "xo", + "sway", + "tbu", + "bimc", + "ahb_aon", + "q6ss_slave", + "q6ss_master", + "q6_axim"; + + resets = <&gcc GCC_CDSP_RESTART>; + reset-names = "restart"; + + qcom,halt-regs = <&tcsr 0x19004>; + + memory-region = <&cdsp_fw_mem>; + + qcom,smem-states = <&cdsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>; + + qcom,remote-pid = <5>; + mboxes = <&apcs_glb 12>; + + label = "cdsp"; + }; + }; + tlmm: pinctrl@1000000 { compatible = "qcom,qcs404-pinctrl"; reg = <0x01000000 0x200000>, @@ -383,6 +461,7 @@ compatible = "qcom,gcc-qcs404"; reg = <0x01800000 0x80000>; #clock-cells = <1>; + #reset-cells = <1>; assigned-clocks = <&gcc GCC_APSS_AHB_CLK_SRC>; assigned-clock-rates = <19200000>; @@ -393,6 +472,11 @@ reg = <0x01905000 0x20000>; }; + tcsr: syscon@1937000 { + compatible = "syscon"; + reg = <0x01937000 0x25000>; + }; + spmi_bus: spmi@200f000 { compatible = "qcom,spmi-pmic-arb"; reg = <0x0200f000 0x001000>, @@ -411,6 +495,53 @@ #interrupt-cells = <4>; }; + remoteproc_wcss: remoteproc@7400000 { + compatible = "qcom,qcs404-wcss-pas"; + reg = <0x07400000 0x4040>; + + interrupts-extended = <&intc GIC_SPI 153 IRQ_TYPE_EDGE_RISING>, + <&wcss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&wcss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&wcss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&wcss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&xo_board>; + clock-names = "xo"; + + memory-region = <&wlan_fw_mem>; + + qcom,smem-states = <&wcss_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>; + + qcom,remote-pid = <1>; + mboxes = <&apcs_glb 16>; + + label = "wcss"; + }; + }; + + pcie_phy: phy@7786000 { + compatible = "qcom,qcs404-pcie2-phy", "qcom,pcie2-phy"; + reg = <0x07786000 0xb8>; + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; + resets = <&gcc GCC_PCIEPHY_0_PHY_BCR>, + <&gcc 21>; + reset-names = "phy", "pipe"; + + clock-output-names = "pcie_0_pipe_clk"; + #phy-cells = <0>; + + status = "disabled"; + }; + sdcc1: sdcc@7804000 { compatible = "qcom,sdhci-msm-v5"; reg = <0x07804000 0x1000>, <0x7805000 0x1000>; @@ -796,6 +927,88 @@ status = "disabled"; }; }; + + remoteproc_adsp: remoteproc@c700000 { + compatible = "qcom,qcs404-adsp-pas"; + reg = <0x0c700000 0x4040>; + + interrupts-extended = <&intc GIC_SPI 293 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&xo_board>; + clock-names = "xo"; + + memory-region = <&adsp_fw_mem>; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>; + + qcom,remote-pid = <2>; + mboxes = <&apcs_glb 8>; + + label = "adsp"; + }; + }; + + pcie: pci@10000000 { + compatible = "qcom,pcie-qcs404", "snps,dw-pcie"; + reg = <0x10000000 0xf1d>, + <0x10000f20 0xa8>, + <0x07780000 0x2000>, + <0x10001000 0x2000>; + reg-names = "dbi", "elbi", "parf", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x81000000 0 0 0x10003000 0 0x00010000>, /* I/O */ + <0x82000000 0 0x10013000 0x10013000 0 0x007ed000>; /* memory */ + + interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + clocks = <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>; + clock-names = "iface", "aux", "master_bus", "slave_bus"; + + resets = <&gcc 18>, + <&gcc 17>, + <&gcc 15>, + <&gcc 19>, + <&gcc GCC_PCIE_0_BCR>, + <&gcc 16>; + reset-names = "axi_m", + "axi_s", + "axi_m_sticky", + "pipe_sticky", + "pwr", + "ahb"; + + phys = <&pcie_phy>; + phy-names = "pciephy"; + + status = "disabled"; + }; }; timer { @@ -865,4 +1078,251 @@ #interrupt-cells = <2>; }; }; + + thermal-zones { + aoss-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 0>; + + trips { + aoss_alert0: trip-point0 { + temperature = <105000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + q6-hvx-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 1>; + + trips { + q6_hvx_alert0: trip-point0 { + temperature = <105000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + lpass-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 2>; + + trips { + lpass_alert0: trip-point0 { + temperature = <105000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + wlan-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 3>; + + trips { + wlan_alert0: trip-point0 { + temperature = <105000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + cluster-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 4>; + + trips { + cluster_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + cluster_alert1: trip-point1 { + temperature = <105000>; + hysteresis = <2000>; + type = "passive"; + }; + cluster_crit: cluster_crit { + temperature = <120000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cluster_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 5>; + + trips { + cpu0_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + cpu0_alert1: trip-point1 { + temperature = <105000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu0_crit: cpu_crit { + temperature = <120000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu0_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 6>; + + trips { + cpu1_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + cpu1_alert1: trip-point1 { + temperature = <105000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu1_crit: cpu_crit { + temperature = <120000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu1_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 7>; + + trips { + cpu2_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + cpu2_alert1: trip-point1 { + temperature = <105000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu2_crit: cpu_crit { + temperature = <120000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu2_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 8>; + + trips { + cpu3_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + cpu3_alert1: trip-point1 { + temperature = <105000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu3_crit: cpu_crit { + temperature = <120000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu3_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + gpu-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 9>; + + trips { + gpu_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza-r1.dts b/arch/arm64/boot/dts/qcom/sdm845-cheza-r1.dts new file mode 100644 index 000000000000..bd7c25bb8d35 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-cheza-r1.dts @@ -0,0 +1,238 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Cheza board device tree source + * + * Copyright 2018 Google LLC. + */ + +/dts-v1/; + +#include "sdm845-cheza.dtsi" + +/ { + model = "Google Cheza (rev1)"; + compatible = "google,cheza-rev1", "qcom,sdm845"; + + /* + * FIXED REGULATORS (not in sdm845-cheza.dtsi) - parents above children + */ + + /* + * NOTE: Technically pp3500_a is not the exact same signal as + * pp3500_a_vbob (there's a load switch between them and the EC can + * control pp3500_a via "en_pp3300_a"), but from the AP's point of + * view they are the same. + */ + pp3500_a: + pp3500_a_vbob: pp3500-a-vbob-regulator { + compatible = "regulator-fixed"; + regulator-name = "vreg_bob"; + + /* + * Comes on automatically when pp5000_ldo comes on, which + * comes on automatically when ppvar_sys comes on + */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3500000>; + regulator-max-microvolt = <3500000>; + + vin-supply = <&ppvar_sys>; + }; + + pp3300_dx_edp: pp3300-dx-edp-regulator { + /* Yes, it's really 3.5 despite the name of the signal */ + regulator-min-microvolt = <3500000>; + regulator-max-microvolt = <3500000>; + + vin-supply = <&pp3500_a>; + }; +}; + +/* FIXED REGULATOR OVERRIDES (modifications to sdm845-cheza.dtsi) */ + +/* + * L19 and L28 technically go to 3.3V, but most boards have old AOP firmware + * that limits them to 3.0, and trying to run at 3.3V with that old firmware + * prevents the system from booting. + */ +&src_pp3000_l19a { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; +}; + +&src_pp3300_l22a { + /delete-property/regulator-boot-on; + /delete-property/regulator-always-on; +}; + +&src_pp3300_l28a { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; +}; + +&src_vreg_bob { + regulator-min-microvolt = <3500000>; + regulator-max-microvolt = <3500000>; + vin-supply = <&pp3500_a_vbob>; +}; + +/* + * NON-REGULATOR OVERRIDES + * (modifications to sdm845-cheza.dtsi) - alphabetized by dtsi label + */ + +/* PINCTRL - board-specific pinctrl */ + +&tlmm { + gpio-line-names = "AP_SPI_FP_MISO", + "AP_SPI_FP_MOSI", + "AP_SPI_FP_CLK", + "AP_SPI_FP_CS_L", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "", + "FP_RST_L", + "FCAM_EN", + "", + "EDP_BRIJ_IRQ", + "EC_IN_RW_ODL", + "", + "RCAM_MCLK", + "FCAM_MCLK", + "", + "RCAM_EN", + "CCI0_SDA", + "CCI0_SCL", + "CCI1_SDA", + "CCI1_SCL", + "FCAM_RST_L", + "", + "PEN_RST_L", + "PEN_IRQ_L", + "", + "RCAM_VSYNC", + "ESIM_MISO", + "ESIM_MOSI", + "ESIM_CLK", + "ESIM_CS_L", + "AP_PEN_1V8_SDA", + "AP_PEN_1V8_SCL", + "AP_TS_I2C_SDA", + "AP_TS_I2C_SCL", + "RCAM_RST_L", + "", + "AP_EDP_BKLTEN", + "AP_BRD_ID1", + "BOOT_CONFIG_4", + "AMP_IRQ_L", + "EDP_BRIJ_I2C_SDA", + "EDP_BRIJ_I2C_SCL", + "EN_PP3300_DX_EDP", + "SD_CD_ODL", + "BT_UART_RTS", + "BT_UART_CTS", + "BT_UART_RXD", + "BT_UART_TXD", + "AMP_I2C_SDA", + "AMP_I2C_SCL", + "AP_BRD_ID3", + "", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "AP_EC_SPI_MISO", + "AP_EC_SPI_MOSI", + "FORCED_USB_BOOT", + "AMP_BCLK", + "AMP_LRCLK", + "AMP_DOUT", + "AMP_DIN", + "AP_BRD_ID2", + "PEN_PDCT_L", + "HP_MCLK", + "HP_BCLK", + "HP_LRCLK", + "HP_DOUT", + "HP_DIN", + "", + "", + "", + "", + "BT_SLIMBUS_DATA", + "BT_SLIMBUS_CLK", + "AMP_RESET_L", + "", + "FCAM_VSYNC", + "", + "AP_SKU_ID1", + "EC_WOV_BCLK", + "EC_WOV_LRCLK", + "EC_WOV_DOUT", + "", + "", + "AP_H1_SPI_MISO", + "AP_H1_SPI_MOSI", + "AP_H1_SPI_CLK", + "AP_H1_SPI_CS_L", + "", + "AP_SPI_CS0_L", + "AP_SPI_MOSI", + "AP_SPI_MISO", + "", + "", + "AP_SPI_CLK", + "", + "RFFE6_CLK", + "RFFE6_DATA", + "BOOT_CONFIG_1", + "BOOT_CONFIG_2", + "BOOT_CONFIG_0", + "EDP_BRIJ_EN", + "", + "USB_HS_TX_EN", + "UIM2_DATA", + "UIM2_CLK", + "UIM2_RST", + "UIM2_PRESENT", + "UIM1_DATA", + "UIM1_CLK", + "UIM1_RST", + "", + "AP_SKU_ID2", + "SDM_GRFC_8", + "SDM_GRFC_9", + "AP_RST_REQ", + "HP_IRQ", + "TS_RESET_L", + "PEN_EJECT_ODL", + "HUB_RST_L", + "FP_TO_AP_IRQ", + "AP_EC_INT_L", + "", + "", + "TS_INT_L", + "AP_SUSPEND_L", + "SDM_GRFC_3", + "", + "H1_AP_INT_ODL", + "QLINK_REQ", + "QLINK_EN", + "SDM_GRFC_2", + "BOOT_CONFIG_3", + "WMSS_RESET_L", + "SDM_GRFC_0", + "SDM_GRFC_1", + "RFFE3_DATA", + "RFFE3_CLK", + "RFFE4_DATA", + "RFFE4_CLK", + "RFFE5_DATA", + "RFFE5_CLK", + "GNSS_EN", + "WCI2_LTE_COEX_RXD", + "WCI2_LTE_COEX_TXD", + "AP_RAM_ID1", + "AP_RAM_ID2", + "RFFE1_DATA", + "RFFE1_CLK"; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza-r2.dts b/arch/arm64/boot/dts/qcom/sdm845-cheza-r2.dts new file mode 100644 index 000000000000..2b7230594ecb --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-cheza-r2.dts @@ -0,0 +1,238 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Cheza board device tree source + * + * Copyright 2018 Google LLC. + */ + +/dts-v1/; + +#include "sdm845-cheza.dtsi" + +/ { + model = "Google Cheza (rev2)"; + compatible = "google,cheza-rev2", "qcom,sdm845"; + + /* + * FIXED REGULATORS (not in sdm845-cheza.dtsi) - parents above children + */ + + /* + * NOTE: Technically pp3500_a is not the exact same signal as + * pp3500_a_vbob (there's a load switch between them and the EC can + * control pp3500_a via "en_pp3300_a"), but from the AP's point of + * view they are the same. + */ + pp3500_a: + pp3500_a_vbob: pp3500-a-vbob-regulator { + compatible = "regulator-fixed"; + regulator-name = "vreg_bob"; + + /* + * Comes on automatically when pp5000_ldo comes on, which + * comes on automatically when ppvar_sys comes on + */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3500000>; + regulator-max-microvolt = <3500000>; + + vin-supply = <&ppvar_sys>; + }; + + pp3300_dx_edp: pp3300-dx-edp-regulator { + /* Yes, it's really 3.5 despite the name of the signal */ + regulator-min-microvolt = <3500000>; + regulator-max-microvolt = <3500000>; + + vin-supply = <&pp3500_a>; + }; +}; + +/* FIXED REGULATOR OVERRIDES (modifications to sdm845-cheza.dtsi) */ + +/* + * L19 and L28 technically go to 3.3V, but most boards have old AOP firmware + * that limits them to 3.0, and trying to run at 3.3V with that old firmware + * prevents the system from booting. + */ +&src_pp3000_l19a { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; +}; + +&src_pp3300_l22a { + /delete-property/regulator-boot-on; + /delete-property/regulator-always-on; +}; + +&src_pp3300_l28a { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; +}; + +&src_vreg_bob { + regulator-min-microvolt = <3500000>; + regulator-max-microvolt = <3500000>; + vin-supply = <&pp3500_a_vbob>; +}; + +/* + * NON-REGULATOR OVERRIDES + * (modifications to sdm845-cheza.dtsi) - alphabetized by dtsi label + */ + +/* PINCTRL - board-specific pinctrl */ + +&tlmm { + gpio-line-names = "AP_SPI_FP_MISO", + "AP_SPI_FP_MOSI", + "AP_SPI_FP_CLK", + "AP_SPI_FP_CS_L", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "BRIJ_SUSPEND", + "FP_RST_L", + "FCAM_EN", + "", + "EDP_BRIJ_IRQ", + "EC_IN_RW_ODL", + "", + "RCAM_MCLK", + "FCAM_MCLK", + "", + "RCAM_EN", + "CCI0_SDA", + "CCI0_SCL", + "CCI1_SDA", + "CCI1_SCL", + "FCAM_RST_L", + "FPMCU_BOOT0", + "PEN_RST_L", + "PEN_IRQ_L", + "FPMCU_SEL_OD", + "RCAM_VSYNC", + "ESIM_MISO", + "ESIM_MOSI", + "ESIM_CLK", + "ESIM_CS_L", + "AP_PEN_1V8_SDA", + "AP_PEN_1V8_SCL", + "AP_TS_I2C_SDA", + "AP_TS_I2C_SCL", + "RCAM_RST_L", + "", + "AP_EDP_BKLTEN", + "AP_BRD_ID1", + "BOOT_CONFIG_4", + "AMP_IRQ_L", + "EDP_BRIJ_I2C_SDA", + "EDP_BRIJ_I2C_SCL", + "EN_PP3300_DX_EDP", + "SD_CD_ODL", + "BT_UART_RTS", + "BT_UART_CTS", + "BT_UART_RXD", + "BT_UART_TXD", + "AMP_I2C_SDA", + "AMP_I2C_SCL", + "AP_BRD_ID3", + "", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "AP_EC_SPI_MISO", + "AP_EC_SPI_MOSI", + "FORCED_USB_BOOT", + "AMP_BCLK", + "AMP_LRCLK", + "AMP_DOUT", + "AMP_DIN", + "AP_BRD_ID2", + "PEN_PDCT_L", + "HP_MCLK", + "HP_BCLK", + "HP_LRCLK", + "HP_DOUT", + "HP_DIN", + "", + "", + "", + "", + "BT_SLIMBUS_DATA", + "BT_SLIMBUS_CLK", + "AMP_RESET_L", + "", + "FCAM_VSYNC", + "", + "AP_SKU_ID1", + "EC_WOV_BCLK", + "EC_WOV_LRCLK", + "EC_WOV_DOUT", + "", + "", + "AP_H1_SPI_MISO", + "AP_H1_SPI_MOSI", + "AP_H1_SPI_CLK", + "AP_H1_SPI_CS_L", + "", + "AP_SPI_CS0_L", + "AP_SPI_MOSI", + "AP_SPI_MISO", + "", + "", + "AP_SPI_CLK", + "", + "RFFE6_CLK", + "RFFE6_DATA", + "BOOT_CONFIG_1", + "BOOT_CONFIG_2", + "BOOT_CONFIG_0", + "EDP_BRIJ_EN", + "", + "USB_HS_TX_EN", + "UIM2_DATA", + "UIM2_CLK", + "UIM2_RST", + "UIM2_PRESENT", + "UIM1_DATA", + "UIM1_CLK", + "UIM1_RST", + "", + "AP_SKU_ID2", + "SDM_GRFC_8", + "SDM_GRFC_9", + "AP_RST_REQ", + "HP_IRQ", + "TS_RESET_L", + "PEN_EJECT_ODL", + "HUB_RST_L", + "FP_TO_AP_IRQ", + "AP_EC_INT_L", + "", + "", + "TS_INT_L", + "AP_SUSPEND_L", + "SDM_GRFC_3", + "", + "H1_AP_INT_ODL", + "QLINK_REQ", + "QLINK_EN", + "SDM_GRFC_2", + "BOOT_CONFIG_3", + "WMSS_RESET_L", + "SDM_GRFC_0", + "SDM_GRFC_1", + "RFFE3_DATA", + "RFFE3_CLK", + "RFFE4_DATA", + "RFFE4_CLK", + "RFFE5_DATA", + "RFFE5_CLK", + "GNSS_EN", + "WCI2_LTE_COEX_RXD", + "WCI2_LTE_COEX_TXD", + "AP_RAM_ID1", + "AP_RAM_ID2", + "RFFE1_DATA", + "RFFE1_CLK"; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza-r3.dts b/arch/arm64/boot/dts/qcom/sdm845-cheza-r3.dts new file mode 100644 index 000000000000..1ba67be08f81 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-cheza-r3.dts @@ -0,0 +1,174 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Cheza board device tree source + * + * Copyright 2018 Google LLC. + */ + +/dts-v1/; + +#include "sdm845-cheza.dtsi" + +/ { + model = "Google Cheza (rev3+)"; + compatible = "google,cheza", "qcom,sdm845"; +}; + +/* PINCTRL - board-specific pinctrl */ + +&tlmm { + gpio-line-names = "AP_SPI_FP_MISO", + "AP_SPI_FP_MOSI", + "AP_SPI_FP_CLK", + "AP_SPI_FP_CS_L", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "BRIJ_SUSPEND", + "FP_RST_L", + "FCAM_EN", + "", + "EDP_BRIJ_IRQ", + "EC_IN_RW_ODL", + "", + "RCAM_MCLK", + "FCAM_MCLK", + "", + "RCAM_EN", + "CCI0_SDA", + "CCI0_SCL", + "CCI1_SDA", + "CCI1_SCL", + "FCAM_RST_L", + "FPMCU_BOOT0", + "PEN_RST_L", + "PEN_IRQ_L", + "FPMCU_SEL_OD", + "RCAM_VSYNC", + "ESIM_MISO", + "ESIM_MOSI", + "ESIM_CLK", + "ESIM_CS_L", + "AP_PEN_1V8_SDA", + "AP_PEN_1V8_SCL", + "AP_TS_I2C_SDA", + "AP_TS_I2C_SCL", + "RCAM_RST_L", + "", + "AP_EDP_BKLTEN", + "AP_BRD_ID0", + "BOOT_CONFIG_4", + "AMP_IRQ_L", + "EDP_BRIJ_I2C_SDA", + "EDP_BRIJ_I2C_SCL", + "EN_PP3300_DX_EDP", + "SD_CD_ODL", + "BT_UART_RTS", + "BT_UART_CTS", + "BT_UART_RXD", + "BT_UART_TXD", + "AMP_I2C_SDA", + "AMP_I2C_SCL", + "AP_BRD_ID2", + "", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "AP_EC_SPI_MISO", + "AP_EC_SPI_MOSI", + "FORCED_USB_BOOT", + "AMP_BCLK", + "AMP_LRCLK", + "AMP_DOUT", + "AMP_DIN", + "AP_BRD_ID1", + "PEN_PDCT_L", + "HP_MCLK", + "HP_BCLK", + "HP_LRCLK", + "HP_DOUT", + "HP_DIN", + "", + "", + "", + "", + "BT_SLIMBUS_DATA", + "BT_SLIMBUS_CLK", + "AMP_RESET_L", + "", + "FCAM_VSYNC", + "", + "AP_SKU_ID0", + "EC_WOV_BCLK", + "EC_WOV_LRCLK", + "EC_WOV_DOUT", + "", + "", + "AP_H1_SPI_MISO", + "AP_H1_SPI_MOSI", + "AP_H1_SPI_CLK", + "AP_H1_SPI_CS_L", + "", + "AP_SPI_CS0_L", + "AP_SPI_MOSI", + "AP_SPI_MISO", + "", + "", + "AP_SPI_CLK", + "", + "RFFE6_CLK", + "RFFE6_DATA", + "BOOT_CONFIG_1", + "BOOT_CONFIG_2", + "BOOT_CONFIG_0", + "EDP_BRIJ_EN", + "", + "USB_HS_TX_EN", + "UIM2_DATA", + "UIM2_CLK", + "UIM2_RST", + "UIM2_PRESENT", + "UIM1_DATA", + "UIM1_CLK", + "UIM1_RST", + "", + "AP_SKU_ID1", + "SDM_GRFC_8", + "SDM_GRFC_9", + "AP_RST_REQ", + "HP_IRQ", + "TS_RESET_L", + "PEN_EJECT_ODL", + "HUB_RST_L", + "FP_TO_AP_IRQ", + "AP_EC_INT_L", + "", + "", + "TS_INT_L", + "AP_SUSPEND_L", + "SDM_GRFC_3", + /* + * AP_FLASH_WP_L is crossystem ABI. Rev3 schematics + * call it BIOS_FLASH_WP_R_L. + */ + "AP_FLASH_WP_L", + "H1_AP_INT_ODL", + "QLINK_REQ", + "QLINK_EN", + "SDM_GRFC_2", + "BOOT_CONFIG_3", + "WMSS_RESET_L", + "SDM_GRFC_0", + "SDM_GRFC_1", + "RFFE3_DATA", + "RFFE3_CLK", + "RFFE4_DATA", + "RFFE4_CLK", + "RFFE5_DATA", + "RFFE5_CLK", + "GNSS_EN", + "WCI2_LTE_COEX_RXD", + "WCI2_LTE_COEX_TXD", + "AP_RAM_ID0", + "AP_RAM_ID1", + "RFFE1_DATA", + "RFFE1_CLK"; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi new file mode 100644 index 000000000000..34881c0113cb --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi @@ -0,0 +1,1326 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Cheza device tree source (common between revisions) + * + * Copyright 2018 Google LLC. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sdm845.dtsi" + +/* PMICs depend on spmi_bus label and so must come after SoC */ +#include "pm8005.dtsi" +#include "pm8998.dtsi" + +/ { + aliases { + bluetooth0 = &bluetooth; + hsuart0 = &uart6; + serial0 = &uart9; + wifi0 = &wifi; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&cros_ec_pwm 0>; + enable-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>; + power-supply = <&ppvar_sys>; + pinctrl-names = "default"; + pinctrl-0 = <&ap_edp_bklten>; + }; + + /* FIXED REGULATORS - parents above children */ + + /* This is the top level supply and variable voltage */ + ppvar_sys: ppvar-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "ppvar_sys"; + regulator-always-on; + regulator-boot-on; + }; + + /* This divides ppvar_sys by 2, so voltage is variable */ + src_vph_pwr: src-vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "src_vph_pwr"; + + /* EC turns on with switchcap_on_l; always on for AP */ + regulator-always-on; + regulator-boot-on; + + vin-supply = <&ppvar_sys>; + }; + + pp5000_a: pp5000-a-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp5000_a"; + + /* EC turns on with en_pp5000_a; always on for AP */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + vin-supply = <&ppvar_sys>; + }; + + src_vreg_bob: src-vreg-bob-regulator { + compatible = "regulator-fixed"; + regulator-name = "src_vreg_bob"; + + /* EC turns on with vbob_en; always on for AP */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + vin-supply = <&ppvar_sys>; + }; + + pp3300_dx_edp: pp3300-dx-edp-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp3300_dx_edp"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 43 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&en_pp3300_dx_edp>; + }; + + /* + * Apparently RPMh does not provide support for PM8998 S4 because it + * is always-on; model it as a fixed regulator. + */ + src_pp1800_s4a: pm8998-smps4 { + compatible = "regulator-fixed"; + regulator-name = "src_pp1800_s4a"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&src_vph_pwr>; + }; + + /* BOARD-SPECIFIC TOP LEVEL NODES */ + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pen_eject_odl>; + + pen-insert { + label = "Pen Insert"; + /* Insert = low, eject = high */ + gpios = <&tlmm 119 GPIO_ACTIVE_LOW>; + linux,code = <SW_PEN_INSERTED>; + linux,input-type = <EV_SW>; + wakeup-source; + }; + }; + + panel: panel { + compatible ="innolux,p120zdg-bf1"; + power-supply = <&pp3300_dx_edp>; + backlight = <&backlight>; + no-hpd; + + ports { + panel_in: port { + panel_in_edp: endpoint { + remote-endpoint = <&sn65dsi86_out>; + }; + }; + }; + }; +}; + +/* + * Reserved memory changes + * + * Putting this all together (out of order with the rest of the file) to keep + * all modifications to the memory map (from sdm845.dtsi) in one place. + */ + +/* + * Our mpss_region is 8MB bigger than the default one and that conflicts + * with venus_mem and cdsp_mem. + * + * For venus_mem we'll delete and re-create at a different address. + * + * cdsp_mem isn't used on cheza right now so we won't bother re-creating it; but + * that also means we need to delete cdsp_pas. + */ +/delete-node/ &venus_mem; +/delete-node/ &cdsp_mem; +/delete-node/ &cdsp_pas; + +/* Increase the size from 120 MB to 128 MB */ +&mpss_region { + reg = <0 0x8e000000 0 0x8000000>; +}; + +/* Increase the size from 2MB to 8MB */ +&rmtfs_mem { + reg = <0 0x88f00000 0 0x800000>; +}; + +/ { + reserved-memory { + venus_mem: memory@96000000 { + reg = <0 0x96000000 0 0x500000>; + no-map; + }; + }; +}; + +&qspi { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&qspi_clk &qspi_cs0 &qspi_data01>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + + /* + * In theory chip supports up to 104 MHz and controller up + * to 80 MHz, but above 25 MHz wasn't reliable so we'll use + * that for now. b:117440651 + */ + spi-max-frequency = <25000000>; + spi-tx-bus-width = <2>; + spi-rx-bus-width = <2>; + }; +}; + + +&apps_rsc { + pm8998-rpmh-regulators { + compatible = "qcom,pm8998-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&src_vph_pwr>; + vdd-s2-supply = <&src_vph_pwr>; + vdd-s3-supply = <&src_vph_pwr>; + vdd-s4-supply = <&src_vph_pwr>; + vdd-s5-supply = <&src_vph_pwr>; + vdd-s6-supply = <&src_vph_pwr>; + vdd-s7-supply = <&src_vph_pwr>; + vdd-s8-supply = <&src_vph_pwr>; + vdd-s9-supply = <&src_vph_pwr>; + vdd-s10-supply = <&src_vph_pwr>; + vdd-s11-supply = <&src_vph_pwr>; + vdd-s12-supply = <&src_vph_pwr>; + vdd-s13-supply = <&src_vph_pwr>; + vdd-l1-l27-supply = <&src_pp1025_s7a>; + vdd-l2-l8-l17-supply = <&src_pp1350_s3a>; + vdd-l3-l11-supply = <&src_pp1025_s7a>; + vdd-l4-l5-supply = <&src_pp1025_s7a>; + vdd-l6-supply = <&src_vph_pwr>; + vdd-l7-l12-l14-l15-supply = <&src_pp2040_s5a>; + vdd-l9-supply = <&src_pp2040_s5a>; + vdd-l10-l23-l25-supply = <&src_vreg_bob>; + vdd-l13-l19-l21-supply = <&src_vreg_bob>; + vdd-l16-l28-supply = <&src_vreg_bob>; + vdd-l18-l22-supply = <&src_vreg_bob>; + vdd-l20-l24-supply = <&src_vreg_bob>; + vdd-l26-supply = <&src_pp1350_s3a>; + vin-lvs-1-2-supply = <&src_pp1800_s4a>; + + src_pp1125_s2a: smps2 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + src_pp1350_s3a: smps3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + src_pp2040_s5a: smps5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2040000>; + }; + + src_pp1025_s7a: smps7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1028000>; + }; + + vdd_qusb_hs0: + vdda_hp_pcie_core: + vdda_mipi_csi0_0p9: + vdda_mipi_csi1_0p9: + vdda_mipi_csi2_0p9: + vdda_mipi_dsi0_pll: + vdda_mipi_dsi1_pll: + vdda_qlink_lv: + vdda_qlink_lv_ck: + vdda_qrefs_0p875: + vdda_pcie_core: + vdda_pll_cc_ebi01: + vdda_pll_cc_ebi23: + vdda_sp_sensor: + vdda_ufs1_core: + vdda_ufs2_core: + vdda_usb1_ss_core: + vdda_usb2_ss_core: + src_pp875_l1a: ldo1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_10: + src_pp1200_l2a: ldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + + /* TODO: why??? */ + regulator-always-on; + }; + + pp1000_l3a_sdr845: ldo3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd_wcss_cx: + vdd_wcss_mx: + vdda_wcss_pll: + src_pp800_l5a: ldo5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_13: + src_pp1800_l6a: ldo6 { + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <1856000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp1800_l7a_wcn3990: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + src_pp1200_l8a: ldo8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1248000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp1800_dx_pen: + src_pp1800_l9a: ldo9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + src_pp1800_l10a: ldo10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp1000_l11a_sdr845: ldo11 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1048000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd_qfprom: + vdd_qfprom_sp: + vdda_apc1_cs_1p8: + vdda_gfx_cs_1p8: + vdda_qrefs_1p8: + vdda_qusb_hs0_1p8: + vddpx_11: + src_pp1800_l12a: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_2: + src_pp2950_l13a: ldo13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + src_pp1800_l14a: ldo14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + src_pp1800_l15a: ldo15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp2700_l16a: ldo16 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + src_pp1300_l17a: ldo17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp2700_l18a: ldo18 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* + * NOTE: this rail should have been called + * src_pp3300_l19a in the schematic + */ + src_pp3000_l19a: ldo19 { + regulator-min-microvolt = <3304000>; + regulator-max-microvolt = <3304000>; + + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + src_pp2950_l20a: ldo20 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + src_pp2950_l21a: ldo21 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp3300_hub: + src_pp3300_l22a: ldo22 { + regulator-min-microvolt = <3304000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + /* + * HACK: Should add a usb hub node and driver + * to turn this on and off at suspend/resume time + */ + regulator-boot-on; + regulator-always-on; + }; + + pp3300_l23a_ch1_wcn3990: ldo23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_qusb_hs0_3p1: + src_pp3075_l24a: ldo24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp3300_l25a_ch0_wcn3990: ldo25 { + regulator-min-microvolt = <3304000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp1200_hub: + vdda_hp_pcie_1p2: + vdda_hv_ebi0: + vdda_hv_ebi1: + vdda_hv_ebi2: + vdda_hv_ebi3: + vdda_mipi_csi_1p25: + vdda_mipi_dsi0_1p2: + vdda_mipi_dsi1_1p2: + vdda_pcie_1p2: + vdda_ufs1_1p2: + vdda_ufs2_1p2: + vdda_usb1_ss_1p2: + vdda_usb2_ss_1p2: + src_pp1200_l26a: ldo26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp3300_dx_pen: + src_pp3300_l28a: ldo28 { + regulator-min-microvolt = <3304000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + src_pp1800_lvs1: lvs1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + src_pp1800_lvs2: lvs2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + + pm8005-rpmh-regulators { + compatible = "qcom,pm8005-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&src_vph_pwr>; + vdd-s2-supply = <&src_vph_pwr>; + vdd-s3-supply = <&src_vph_pwr>; + vdd-s4-supply = <&src_vph_pwr>; + + src_pp600_s3c: smps3 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <600000>; + }; + }; +}; + +&dsi0 { + status = "okay"; + vdda-supply = <&vdda_mipi_dsi0_1p2>; + + ports { + port@1 { + endpoint { + remote-endpoint = <&sn65dsi86_in>; + data-lanes = <0 1 2 3>; + }; + }; + }; +}; + +&dsi0_phy { + status = "okay"; + vdds-supply = <&vdda_mipi_dsi0_pll>; +}; + +edp_brij_i2c: &i2c3 { + status = "okay"; + clock-frequency = <400000>; + + sn65dsi86_bridge: bridge@2d { + compatible = "ti,sn65dsi86"; + reg = <0x2d>; + pinctrl-names = "default"; + pinctrl-0 = <&edp_brij_en &edp_brij_irq>; + + interrupt-parent = <&tlmm>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; + + enable-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>; + + vpll-supply = <&src_pp1800_s4a>; + vccio-supply = <&src_pp1800_s4a>; + vcca-supply = <&src_pp1200_l2a>; + vcc-supply = <&src_pp1200_l2a>; + + clocks = <&rpmhcc RPMH_LN_BB_CLK2>; + clock-names = "refclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + sn65dsi86_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + sn65dsi86_out: endpoint { + remote-endpoint = <&panel_in_edp>; + }; + }; + }; + }; +}; + +ap_pen_1v8: &i2c11 { + status = "okay"; + clock-frequency = <400000>; + + digitizer@9 { + compatible = "wacom,w9013", "hid-over-i2c"; + reg = <0x9>; + pinctrl-names = "default"; + pinctrl-0 = <&pen_irq_l>, <&pen_pdct_l>, <&pen_rst_l>; + + vdd-supply = <&pp3300_dx_pen>; + vddl-supply = <&pp1800_dx_pen>; + post-power-on-delay-ms = <100>; + + interrupt-parent = <&tlmm>; + interrupts = <24 IRQ_TYPE_LEVEL_LOW>; + + hid-descr-addr = <0x1>; + }; +}; + +amp_i2c: &i2c12 { + status = "okay"; + clock-frequency = <400000>; +}; + +ap_ts_i2c: &i2c14 { + status = "okay"; + clock-frequency = <400000>; + + touchscreen@10 { + compatible = "elan,ekth3500"; + reg = <0x10>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_l &ts_reset_l>; + + interrupt-parent = <&tlmm>; + interrupts = <125 IRQ_TYPE_LEVEL_LOW>; + + vcc33-supply = <&src_pp3300_l28a>; + + reset-gpios = <&tlmm 118 GPIO_ACTIVE_LOW>; + }; +}; + +&lpasscc { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&mdss_mdp { + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data &sd_cd_odl>; + + vmmc-supply = <&src_pp2950_l21a>; + vqmmc-supply = <&vddpx_2>; + + cd-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>; +}; + +&spi0 { + status = "okay"; +}; + +&spi10 { + status = "okay"; + + cros_ec: ec@0 { + compatible = "google,cros-ec-spi"; + reg = <0>; + interrupt-parent = <&tlmm>; + interrupts = <122 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ec_ap_int_l>; + spi-max-frequency = <3000000>; + + cros_ec_pwm: ec-pwm { + compatible = "google,cros-ec-pwm"; + #pwm-cells = <1>; + }; + + i2c_tunnel: i2c-tunnel { + compatible = "google,cros-ec-i2c-tunnel"; + google,remote-bus = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + pdupdate { + compatible = "google,cros-ec-pd-update"; + }; + }; +}; + +#include <arm/cros-ec-keyboard.dtsi> +#include <arm/cros-ec-sbs.dtsi> + +&uart6 { + status = "okay"; + + bluetooth: wcn3990-bt { + compatible = "qcom,wcn3990-bt"; + vddio-supply = <&src_pp1800_s4a>; + vddxo-supply = <&pp1800_l7a_wcn3990>; + vddrf-supply = <&src_pp1300_l17a>; + vddch0-supply = <&pp3300_l25a_ch0_wcn3990>; + max-speed = <3200000>; + }; +}; + +&uart9 { + status = "okay"; +}; + +&ufs_mem_hc { + status = "okay"; + pinctrl-names = "init", "default"; + pinctrl-0 = <&ufs_dev_reset_assert>; + pinctrl-1 = <&ufs_dev_reset_deassert>; + + vcc-supply = <&src_pp2950_l20a>; + vcc-max-microamp = <600000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vdda_ufs1_core>; + vdda-pll-supply = <&vdda_ufs1_1p2>; +}; + +&usb_1 { + status = "okay"; + + /* We'll use this as USB 2.0 only */ + qcom,select-utmi-as-pipe-clk; +}; + +&usb_1_dwc3 { + /* + * The hardware design intends this port to be hooked up in peripheral + * mode, so we'll hardcode it here. Some details: + * - SDM845 expects only a single Type C connector so it has only one + * native Type C port but cheza has two Type C connectors. + * - The only source of DP is the single native Type C port. + * - On cheza we want to be able to hook DP up to _either_ of the + * two Type C connectors and want to be able to achieve 4 lanes of DP. + * - When you configure a Type C port for 4 lanes of DP you lose USB3. + * - In order to make everything work, the native Type C port is always + * configured as 4-lanes DP so it's always available. + * - The extra USB3 port on SDM845 goes to a USB 3 hub which is then + * sent to the two Type C connectors. + * - The extra USB2 lines from the native Type C port are always + * setup as "peripheral" so that we can mux them over to one connector + * or the other if someone needs the connector configured as a gadget + * (but they only get USB2 speeds). + * + * All the hardware muxes would allow us to hook things up in different + * ways to some potential benefit for static configurations (you could + * achieve extra USB2 bandwidth by using two different ports for the + * two connectors or possibly even get USB3 peripheral mode), but in + * each case you end up forcing to disconnect/reconnect an in-use + * USB session in some cases depending on what you hotplug into the + * other connector. Thus hardcoding this as peripheral makes sense. + */ + dr_mode = "peripheral"; + + /* + * We always need the high speed pins as 4-lanes DP in case someone + * hotplugs a DP peripheral. Thus limit this port to a max of high + * speed. + */ + maximum-speed = "high-speed"; + + /* + * We don't need the usb3-phy since we run in highspeed mode always, so + * re-define these properties removing the superspeed USB PHY reference. + */ + phys = <&usb_1_hsphy>; + phy-names = "usb2-phy"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdd-supply = <&vdda_usb1_ss_core>; + vdda-pll-supply = <&vdda_qusb_hs0_1p8>; + vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>; + qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>; + qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_2_dwc3 { + /* We have this hooked up to a hub and we always use in host mode */ + dr_mode = "host"; +}; + +&usb_2_hsphy { + status = "okay"; + + vdd-supply = <&vdda_usb2_ss_core>; + vdda-pll-supply = <&vdda_qusb_hs0_1p8>; + vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>; +}; + +&usb_2_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vdda_usb2_ss_1p2>; + vdda-pll-supply = <&vdda_usb2_ss_core>; +}; + +&wifi { + status = "okay"; + + vdd-0.8-cx-mx-supply = <&src_pp800_l5a >; + vdd-1.8-xo-supply = <&pp1800_l7a_wcn3990>; + vdd-1.3-rfa-supply = <&src_pp1300_l17a>; + vdd-3.3-ch0-supply = <&pp3300_l25a_ch0_wcn3990>; +}; + +/* PINCTRL - additions to nodes defined in sdm845.dtsi */ + +&qspi_cs0 { + pinconf { + pins = "gpio90"; + bias-disable; + }; +}; + +&qspi_clk { + pinconf { + pins = "gpio95"; + bias-disable; + }; +}; + +&qspi_data01 { + pinconf { + pins = "gpio91", "gpio92"; + + /* High-Z when no transfers; nice to park the lines */ + bias-pull-up; + }; +}; + +&qup_i2c3_default { + pinconf { + pins = "gpio41", "gpio42"; + drive-strength = <2>; + + /* Has external pullup */ + bias-disable; + }; +}; + +&qup_i2c11_default { + pinconf { + pins = "gpio31", "gpio32"; + drive-strength = <2>; + + /* Has external pullup */ + bias-disable; + }; +}; + +&qup_i2c12_default { + pinconf { + pins = "gpio49", "gpio50"; + drive-strength = <2>; + + /* Has external pullup */ + bias-disable; + }; +}; + +&qup_i2c14_default { + pinconf { + pins = "gpio33", "gpio34"; + drive-strength = <2>; + + /* Has external pullup */ + bias-disable; + }; +}; + +&qup_spi0_default { + pinconf { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + drive-strength = <2>; + bias-disable; + }; +}; + +&qup_spi5_default { + pinconf { + pins = "gpio85", "gpio86", "gpio87", "gpio88"; + drive-strength = <2>; + bias-disable; + }; +}; + +&qup_spi10_default { + pinconf { + pins = "gpio53", "gpio54", "gpio55", "gpio56"; + drive-strength = <2>; + bias-disable; + }; +}; + +&qup_uart6_default { + /* Change pinmux to all 4 pins since CTS and RTS are connected */ + pinmux { + pins = "gpio45", "gpio46", + "gpio47", "gpio48"; + }; + + pinconf-cts { + /* + * Configure a pull-down on 45 (CTS) to match the pull of + * the Bluetooth module. + */ + pins = "gpio45"; + bias-pull-down; + }; + + pinconf-rts-tx { + /* We'll drive 46 (RTS) and 47 (TX), so no pull */ + pins = "gpio46", "gpio47"; + drive-strength = <2>; + bias-disable; + }; + + pinconf-rx { + /* + * Configure a pull-up on 48 (RX). This is needed to avoid + * garbage data when the TX pin of the Bluetooth module is + * in tri-state (module powered off or not driving the + * signal yet). + */ + pins = "gpio48"; + bias-pull-up; + }; +}; + +&qup_uart9_default { + pinconf-tx { + pins = "gpio4"; + drive-strength = <2>; + bias-disable; + }; + + pinconf-rx { + pins = "gpio5"; + drive-strength = <2>; + bias-pull-up; + }; +}; + +/* PINCTRL - board-specific pinctrl */ +&pm8005_gpio { + gpio-line-names = "", + "", + "SLB", + ""; +}; + +&pm8998_adc { + adc-chan@4d { + reg = <ADC5_AMUX_THM1_100K_PU>; + label = "sdm_temp"; + }; + + adc-chan@4e { + reg = <ADC5_AMUX_THM2_100K_PU>; + label = "quiet_temp"; + }; + + adc-chan@4f { + reg = <ADC5_AMUX_THM3_100K_PU>; + label = "lte_temp_1"; + }; + + adc-chan@50 { + reg = <ADC5_AMUX_THM4_100K_PU>; + label = "lte_temp_2"; + }; + + adc-chan@51 { + reg = <ADC5_AMUX_THM5_100K_PU>; + label = "charger_temp"; + }; +}; + +&pm8998_gpio { + gpio-line-names = "", + "", + "SW_CTRL", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "CFG_OPT1", + "WCSS_PWR_REQ", + "", + "CFG_OPT2", + "SLB"; +}; + +&tlmm { + /* + * pinctrl settings for pins that have no real owners. + */ + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&bios_flash_wp_r_l>, + <&ap_suspend_l_deassert>; + + pinctrl-1 = <&bios_flash_wp_r_l>, + <&ap_suspend_l_assert>; + + /* + * Hogs prevent usermode from changing the value. A GPIO can be both + * here and in the pinctrl section. + */ + ap-suspend-l-hog { + gpio-hog; + gpios = <126 GPIO_ACTIVE_LOW>; + output-low; + }; + + ap_edp_bklten: ap-edp-bklten { + pinmux { + pins = "gpio37"; + function = "gpio"; + }; + + pinconf { + pins = "gpio37"; + drive-strength = <2>; + bias-disable; + }; + }; + + bios_flash_wp_r_l: bios-flash-wp-r-l { + pinmux { + pins = "gpio128"; + function = "gpio"; + input-enable; + }; + + pinconf { + pins = "gpio128"; + bias-disable; + }; + }; + + ec_ap_int_l: ec-ap-int-l { + pinmux { + pins = "gpio122"; + function = "gpio"; + input-enable; + }; + + pinconf { + pins = "gpio122"; + bias-pull-up; + }; + }; + + edp_brij_en: edp-brij-en { + pinmux { + pins = "gpio102"; + function = "gpio"; + }; + + pinconf { + pins = "gpio102"; + drive-strength = <2>; + bias-disable; + }; + }; + + edp_brij_irq: edp-brij-irq { + pinmux { + pins = "gpio10"; + function = "gpio"; + }; + + pinconf { + pins = "gpio10"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + en_pp3300_dx_edp: en-pp3300-dx-edp { + pinmux { + pins = "gpio43"; + function = "gpio"; + }; + + pinconf { + pins = "gpio43"; + drive-strength = <2>; + bias-disable; + }; + }; + + h1_ap_int_odl: h1-ap-int-odl { + pinmux { + pins = "gpio129"; + function = "gpio"; + input-enable; + }; + + pinconf { + pins = "gpio129"; + bias-pull-up; + }; + }; + + pen_eject_odl: pen-eject-odl { + pinmux { + pins = "gpio119"; + function = "gpio"; + bias-pull-up; + }; + }; + + pen_irq_l: pen-irq-l { + pinmux { + pins = "gpio24"; + function = "gpio"; + }; + + pinconf { + pins = "gpio24"; + + /* Has external pullup */ + bias-disable; + }; + }; + + pen_pdct_l: pen-pdct-l { + pinmux { + pins = "gpio63"; + function = "gpio"; + }; + + pinconf { + pins = "gpio63"; + + /* Has external pullup */ + bias-disable; + }; + }; + + pen_rst_l: pen-rst-l { + pinmux { + pins = "gpio23"; + function = "gpio"; + }; + + pinconf { + pins = "gpio23"; + bias-disable; + drive-strength = <2>; + + /* + * The pen driver doesn't currently support + * driving this reset line. By specifying + * output-high here we're relying on the fact + * that this pin has a default pulldown at boot + * (which makes sure the pen was in reset if it + * was powered) and then we set it high here to + * take it out of reset. Better would be if the + * pen driver could control this and we could + * remove "output-high" here. + */ + output-high; + }; + }; + + sdc2_clk: sdc2-clk { + pinconf { + pins = "sdc2_clk"; + bias-disable; + + /* + * It seems that mmc_test reports errors if drive + * strength is not 16. + */ + drive-strength = <16>; + }; + }; + + sdc2_cmd: sdc2-cmd { + pinconf { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <16>; + }; + }; + + sdc2_data: sdc2-data { + pinconf { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <16>; + }; + }; + + sd_cd_odl: sd-cd-odl { + pinmux { + pins = "gpio44"; + function = "gpio"; + }; + + pinconf { + pins = "gpio44"; + bias-pull-up; + }; + }; + + ts_int_l: ts-int-l { + pinmux { + pins = "gpio125"; + function = "gpio"; + }; + + pinconf { + pins = "gpio125"; + bias-pull-up; + }; + }; + + ts_reset_l: ts-reset-l { + pinmux { + pins = "gpio118"; + function = "gpio"; + }; + + pinconf { + pins = "gpio118"; + bias-disable; + drive-strength = <2>; + }; + }; + + ufs_dev_reset_assert: ufs_dev_reset_assert { + config { + pins = "ufs_reset"; + bias-pull-down; /* default: pull down */ + /* + * UFS_RESET driver strengths are having + * different values/steps compared to typical + * GPIO drive strengths. + * + * Following table clarifies: + * + * HDRV value | UFS_RESET | Typical GPIO + * (dec) | (mA) | (mA) + * 0 | 0.8 | 2 + * 1 | 1.55 | 4 + * 2 | 2.35 | 6 + * 3 | 3.1 | 8 + * 4 | 3.9 | 10 + * 5 | 4.65 | 12 + * 6 | 5.4 | 14 + * 7 | 6.15 | 16 + * + * POR value for UFS_RESET HDRV is 3 which means + * 3.1mA and we want to use that. Hence just + * specify 8mA to "drive-strength" binding and + * that should result into writing 3 to HDRV + * field. + */ + drive-strength = <8>; /* default: 3.1 mA */ + output-low; /* active low reset */ + }; + }; + + ufs_dev_reset_deassert: ufs_dev_reset_deassert { + config { + pins = "ufs_reset"; + bias-pull-down; /* default: pull down */ + /* + * default: 3.1 mA + * check comments under ufs_dev_reset_assert + */ + drive-strength = <8>; + output-high; /* active low reset */ + }; + }; + + ap_suspend_l_assert: ap_suspend_l_assert { + config { + pins = "gpio126"; + function = "gpio"; + bias-no-pull; + drive-strength = <2>; + output-low; + }; + }; + + ap_suspend_l_deassert: ap_suspend_l_deassert { + config { + pins = "gpio126"; + function = "gpio"; + bias-no-pull; + drive-strength = <2>; + output-high; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts new file mode 100644 index 000000000000..f5a85caff1a3 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -0,0 +1,559 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2019, Linaro Ltd. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sdm845.dtsi" +#include "pm8998.dtsi" +#include "pmi8998.dtsi" + +/ { + model = "Thundercomm Dragonboard 845c"; + compatible = "thundercomm,db845c", "qcom,sdm845"; + + aliases { + serial0 = &uart9; + hsuart0 = &uart6; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + dc12v: dc12v-regulator { + compatible = "regulator-fixed"; + regulator-name = "DC12V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + }; + + gpio_keys { + compatible = "gpio-keys"; + autorepeat; + + pinctrl-names = "default"; + pinctrl-0 = <&vol_up_pin_a>; + + vol-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + user4 { + label = "green:user4"; + gpios = <&pm8998_gpio 13 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "panic-indicator"; + default-state = "off"; + }; + + wlan { + label = "yellow:wlan"; + gpios = <&pm8998_gpio 9 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + + bt { + label = "blue:bt"; + gpios = <&pm8998_gpio 5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "bluetooth-power"; + default-state = "off"; + }; + }; + + lt9611_1v8: lt9611-vdd18-regulator { + compatible = "regulator-fixed"; + regulator-name = "LT9611_1V8"; + + vin-supply = <&vdc_5v>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + lt9611_3v3: lt9611-3v3 { + compatible = "regulator-fixed"; + regulator-name = "LT9611_3V3"; + + vin-supply = <&vdc_3v3>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + // TODO: make it possible to drive same GPIO from two clients + // gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>; + // enable-active-high; + }; + + pcie0_1p05v: pcie-0-1p05v-regulator { + compatible = "regulator-fixed"; + regulator-name = "PCIE0_1.05V"; + + vin-supply = <&vbat>; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + + // TODO: make it possible to drive same GPIO from two clients + // gpio = <&tlmm 90 GPIO_ACTIVE_HIGH>; + // enable-active-high; + }; + + pcie0_3p3v_dual: vldo-3v3-regulator { + compatible = "regulator-fixed"; + regulator-name = "VLDO_3V3"; + + vin-supply = <&vbat>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 90 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_pwren_state>; + }; + + v5p0_hdmiout: v5p0-hdmiout-regulator { + compatible = "regulator-fixed"; + regulator-name = "V5P0_HDMIOUT"; + + vin-supply = <&vdc_5v>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <500000>; + + // TODO: make it possible to drive same GPIO from two clients + // gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>; + // enable-active-high; + }; + + vbat: vbat-regulator { + compatible = "regulator-fixed"; + regulator-name = "VBAT"; + + vin-supply = <&dc12v>; + regulator-min-microvolt = <4200000>; + regulator-max-microvolt = <4200000>; + regulator-always-on; + }; + + vbat_som: vbat-som-regulator { + compatible = "regulator-fixed"; + regulator-name = "VBAT_SOM"; + + vin-supply = <&dc12v>; + regulator-min-microvolt = <4200000>; + regulator-max-microvolt = <4200000>; + regulator-always-on; + }; + + vdc_3v3: vdc-3v3-regulator { + compatible = "regulator-fixed"; + regulator-name = "VDC_3V3"; + vin-supply = <&dc12v>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdc_5v: vdc-5v-regulator { + compatible = "regulator-fixed"; + regulator-name = "VDC_5V"; + + vin-supply = <&dc12v>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <500000>; + regulator-always-on; + }; + + vreg_s4a_1p8: vreg-s4a-1p8 { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + + vin-supply = <&vbat_som>; + }; +}; + +&adsp_pas { + status = "okay"; + + firmware-name = "qcom/db845c/adsp.mdt"; +}; + +&apps_rsc { + pm8998-rpmh-regulators { + compatible = "qcom,pm8998-rpmh-regulators"; + qcom,pmic-id = "a"; + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-s11-supply = <&vph_pwr>; + vdd-s12-supply = <&vph_pwr>; + vdd-s13-supply = <&vph_pwr>; + vdd-l1-l27-supply = <&vreg_s7a_1p025>; + vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>; + vdd-l3-l11-supply = <&vreg_s7a_1p025>; + vdd-l4-l5-supply = <&vreg_s7a_1p025>; + vdd-l6-supply = <&vph_pwr>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>; + vdd-l9-supply = <&vreg_bob>; + vdd-l10-l23-l25-supply = <&vreg_bob>; + vdd-l13-l19-l21-supply = <&vreg_bob>; + vdd-l16-l28-supply = <&vreg_bob>; + vdd-l18-l22-supply = <&vreg_bob>; + vdd-l20-l24-supply = <&vreg_bob>; + vdd-l26-supply = <&vreg_s3a_1p35>; + vin-lvs-1-2-supply = <&vreg_s4a_1p8>; + + vreg_s3a_1p35: smps3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_s5a_2p04: smps5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s7a_1p025: smps7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1028000>; + }; + + vreg_l1a_0p875: ldo1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5a_0p8: ldo5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13a_2p95: ldo13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17a_1p3: ldo17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l20a_2p95: ldo20 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2968000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l21a_2p95: ldo21 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2968000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l24a_3p075: ldo24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l25a_3p3: ldo25 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l26a_1p2: ldo26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pmi8998-rpmh-regulators { + compatible = "qcom,pmi8998-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-bob-supply = <&vph_pwr>; + + vreg_bob: bob { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3600000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-bypass; + }; + }; +}; + +&cdsp_pas { + status = "okay"; + firmware-name = "qcom/db845c/cdsp.mdt"; +}; + +&gcc { + protected-clocks = <GCC_QSPI_CORE_CLK>, + <GCC_QSPI_CORE_CLK_SRC>, + <GCC_QSPI_CNOC_PERIPH_AHB_CLK>; +}; + +&pm8998_gpio { + vol_up_pin_a: vol-up-active { + pins = "gpio6"; + function = "normal"; + input-enable; + bias-pull-up; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + }; +}; + +&pm8998_pon { + resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_VOLUMEDOWN>; + }; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>; + + vmmc-supply = <&vreg_l21a_2p95>; + vqmmc-supply = <&vreg_l13a_2p95>; + + bus-width = <4>; + cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>; +}; + +&tlmm { + pcie0_pwren_state: pcie0-pwren { + pins = "gpio90"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + sdc2_default_state: sdc2-default { + clk { + pins = "sdc2_clk"; + bias-disable; + + /* + * It seems that mmc_test reports errors if drive + * strength is not 16 on clk, cmd, and data pins. + */ + drive-strength = <16>; + }; + + cmd { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + }; + + sdc2_card_det_n: sd-card-det-n { + pins = "gpio126"; + function = "gpio"; + bias-pull-up; + }; +}; + +&uart6 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + max-speed = <3200000>; + }; +}; + +&uart9 { + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdd-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>; + qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>; + qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l26a_1p2>; + vdda-pll-supply = <&vreg_l1a_0p875>; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_2_dwc3 { + dr_mode = "host"; +}; + +&usb_2_hsphy { + status = "okay"; + + vdd-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>; +}; + +&usb_2_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l26a_1p2>; + vdda-pll-supply = <&vreg_l1a_0p875>; +}; + +&ufs_mem_hc { + status = "okay"; + + reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l20a_2p95>; + vcc-max-microamp = <800000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l26a_1p2>; +}; + +&wifi { + status = "okay"; + + vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; +}; + +/* PINCTRL - additions to nodes defined in sdm845.dtsi */ + +&qup_uart6_default { + pinmux { + pins = "gpio45", "gpio46", "gpio47", "gpio48"; + function = "qup6"; + }; + + cts { + pins = "gpio45"; + bias-disable; + }; + + rts-tx { + pins = "gpio46", "gpio47"; + drive-strength = <2>; + bias-disable; + }; + + rx { + pins = "gpio48"; + bias-pull-up; + }; +}; + +&qup_uart9_default { + pinconf-tx { + pins = "gpio4"; + drive-strength = <2>; + bias-disable; + }; + + pinconf-rx { + pins = "gpio5"; + drive-strength = <2>; + bias-pull-up; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts index 02b8357c8ce8..c57548b7b250 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts @@ -388,6 +388,8 @@ &ufs_mem_hc { status = "okay"; + reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>; + vcc-supply = <&vreg_l20a_2p95>; vcc-max-microamp = <600000>; }; @@ -404,8 +406,8 @@ }; &usb_1_dwc3 { - /* Until we have Type C hooked up we'll force this as host. */ - dr_mode = "host"; + /* Until we have Type C hooked up we'll force this as peripheral. */ + dr_mode = "peripheral"; }; &usb_1_hsphy { diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index fcb93300ca62..f406a4340b05 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -190,7 +190,11 @@ compatible = "qcom,kryo385"; reg = <0x0 0x0>; enable-method = "psci"; + cpu-idle-states = <&LITTLE_CPU_SLEEP_0 + &LITTLE_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <607>; + dynamic-power-coefficient = <100>; qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; next-level-cache = <&L2_0>; @@ -208,7 +212,11 @@ compatible = "qcom,kryo385"; reg = <0x0 0x100>; enable-method = "psci"; + cpu-idle-states = <&LITTLE_CPU_SLEEP_0 + &LITTLE_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <607>; + dynamic-power-coefficient = <100>; qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; next-level-cache = <&L2_100>; @@ -223,7 +231,11 @@ compatible = "qcom,kryo385"; reg = <0x0 0x200>; enable-method = "psci"; + cpu-idle-states = <&LITTLE_CPU_SLEEP_0 + &LITTLE_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <607>; + dynamic-power-coefficient = <100>; qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; next-level-cache = <&L2_200>; @@ -238,7 +250,11 @@ compatible = "qcom,kryo385"; reg = <0x0 0x300>; enable-method = "psci"; + cpu-idle-states = <&LITTLE_CPU_SLEEP_0 + &LITTLE_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <607>; + dynamic-power-coefficient = <100>; qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; next-level-cache = <&L2_300>; @@ -254,6 +270,10 @@ reg = <0x0 0x400>; enable-method = "psci"; capacity-dmips-mhz = <1024>; + cpu-idle-states = <&BIG_CPU_SLEEP_0 + &BIG_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; + dynamic-power-coefficient = <396>; qcom,freq-domain = <&cpufreq_hw 1>; #cooling-cells = <2>; next-level-cache = <&L2_400>; @@ -269,6 +289,10 @@ reg = <0x0 0x500>; enable-method = "psci"; capacity-dmips-mhz = <1024>; + cpu-idle-states = <&BIG_CPU_SLEEP_0 + &BIG_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; + dynamic-power-coefficient = <396>; qcom,freq-domain = <&cpufreq_hw 1>; #cooling-cells = <2>; next-level-cache = <&L2_500>; @@ -284,6 +308,10 @@ reg = <0x0 0x600>; enable-method = "psci"; capacity-dmips-mhz = <1024>; + cpu-idle-states = <&BIG_CPU_SLEEP_0 + &BIG_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; + dynamic-power-coefficient = <396>; qcom,freq-domain = <&cpufreq_hw 1>; #cooling-cells = <2>; next-level-cache = <&L2_600>; @@ -299,6 +327,10 @@ reg = <0x0 0x700>; enable-method = "psci"; capacity-dmips-mhz = <1024>; + cpu-idle-states = <&BIG_CPU_SLEEP_0 + &BIG_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; + dynamic-power-coefficient = <396>; qcom,freq-domain = <&cpufreq_hw 1>; #cooling-cells = <2>; next-level-cache = <&L2_700>; @@ -325,26 +357,78 @@ core3 { cpu = <&CPU3>; }; - }; - cluster1 { - core0 { + core4 { cpu = <&CPU4>; }; - core1 { + core5 { cpu = <&CPU5>; }; - core2 { + core6 { cpu = <&CPU6>; }; - core3 { + core7 { cpu = <&CPU7>; }; }; }; + + idle-states { + entry-method = "psci"; + + LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "little-power-down"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <350>; + exit-latency-us = <461>; + min-residency-us = <1890>; + local-timer-stop; + }; + + LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 { + compatible = "arm,idle-state"; + idle-state-name = "little-rail-power-down"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <360>; + exit-latency-us = <531>; + min-residency-us = <3934>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "big-power-down"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <264>; + exit-latency-us = <621>; + min-residency-us = <952>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_1: cpu-sleep-1-1 { + compatible = "arm,idle-state"; + idle-state-name = "big-rail-power-down"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <702>; + exit-latency-us = <1061>; + min-residency-us = <4488>; + local-timer-stop; + }; + + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "arm,idle-state"; + idle-state-name = "cluster-power-down"; + arm,psci-suspend-param = <0x400000F4>; + entry-latency-us = <3263>; + exit-latency-us = <6562>; + min-residency-us = <9987>; + local-timer-stop; + }; + }; }; pmu { @@ -407,6 +491,25 @@ label = "lpass"; qcom,remote-pid = <2>; mboxes = <&apss_shared 8>; + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "adsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x1823 0x0>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x1824 0x0>; + }; + }; }; }; @@ -436,6 +539,61 @@ label = "turing"; qcom,remote-pid = <5>; mboxes = <&apss_shared 4>; + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "cdsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x1401 0x30>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x1402 0x30>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x1403 0x30>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x1404 0x30>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x1405 0x30>; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x1406 0x30>; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + iommus = <&apps_smmu 0x1407 0x30>; + }; + + compute-cb@8 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <8>; + iommus = <&apps_smmu 0x1408 0x30>; + }; + }; }; }; @@ -544,7 +702,7 @@ method = "smc"; }; - soc: soc { + soc: soc@0 { #address-cells = <2>; #size-cells = <2>; ranges = <0 0 0 0 0x10 0>; @@ -1199,6 +1357,13 @@ }; }; + cache-controller@1100000 { + compatible = "qcom,sdm845-llcc"; + reg = <0 0x01100000 0 0x200000>, <0 0x01300000 0 0x50000>; + reg-names = "llcc_base", "llcc_broadcast_base"; + interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; + }; + ufs_mem_hc: ufshc@1d84000 { compatible = "qcom,sdm845-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; @@ -1671,6 +1836,64 @@ }; }; + mss_pil: remoteproc@4080000 { + compatible = "qcom,sdm845-mss-pil"; + reg = <0 0x04080000 0 0x408>, <0 0x04180000 0 0x48>; + reg-names = "qdsp6", "rmb"; + + interrupts-extended = + <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack", + "shutdown-ack"; + + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, + <&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>, + <&gcc GCC_BOOT_ROM_AHB_CLK>, + <&gcc GCC_MSS_GPLL0_DIV_CLK_SRC>, + <&gcc GCC_MSS_SNOC_AXI_CLK>, + <&gcc GCC_MSS_MFAB_AXIS_CLK>, + <&gcc GCC_PRNG_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "bus", "mem", "gpll0_mss", + "snoc_axi", "mnoc_axi", "prng", "xo"; + + qcom,smem-states = <&modem_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + resets = <&aoss_reset AOSS_CC_MSS_RESTART>, + <&pdc_reset PDC_MODEM_SYNC_RESET>; + reset-names = "mss_restart", "pdc_reset"; + + qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>; + + power-domains = <&aoss_qmp 2>, + <&rpmhpd SDM845_CX>, + <&rpmhpd SDM845_MX>, + <&rpmhpd SDM845_MSS>; + power-domain-names = "load_state", "cx", "mx", "mss"; + + mba { + memory-region = <&mba_region>; + }; + + mpss { + memory-region = <&mpss_region>; + }; + + glink-edge { + interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>; + label = "modem"; + qcom,remote-pid = <1>; + mboxes = <&apss_shared 12>; + }; + }; + gpucc: clock-controller@5090000 { compatible = "qcom,sdm845-gpucc"; reg = <0 0x05090000 0 0x9000>; @@ -1681,6 +1904,457 @@ clock-names = "xo"; }; + stm@6002000 { + compatible = "arm,coresight-stm", "arm,primecell"; + reg = <0 0x06002000 0 0x1000>, + <0 0x16280000 0 0x180000>; + reg-names = "stm-base", "stm-stimulus-base"; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + stm_out: endpoint { + remote-endpoint = + <&funnel0_in7>; + }; + }; + }; + }; + + funnel@6041000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06041000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel0_out: endpoint { + remote-endpoint = + <&merge_funnel_in0>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@7 { + reg = <7>; + funnel0_in7: endpoint { + remote-endpoint = <&stm_out>; + }; + }; + }; + }; + + funnel@6043000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06043000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel2_out: endpoint { + remote-endpoint = + <&merge_funnel_in2>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@5 { + reg = <5>; + funnel2_in5: endpoint { + remote-endpoint = + <&apss_merge_funnel_out>; + }; + }; + }; + }; + + funnel@6045000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06045000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + merge_funnel_out: endpoint { + remote-endpoint = <&etf_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + merge_funnel_in0: endpoint { + remote-endpoint = + <&funnel0_out>; + }; + }; + + port@2 { + reg = <2>; + merge_funnel_in2: endpoint { + remote-endpoint = + <&funnel2_out>; + }; + }; + }; + }; + + replicator@6046000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0 0x06046000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + replicator_out: endpoint { + remote-endpoint = <&etr_in>; + }; + }; + }; + + in-ports { + port { + replicator_in: endpoint { + remote-endpoint = <&etf_out>; + }; + }; + }; + }; + + etf@6047000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0x06047000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + etf_out: endpoint { + remote-endpoint = + <&replicator_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + etf_in: endpoint { + remote-endpoint = + <&merge_funnel_out>; + }; + }; + }; + }; + + etr@6048000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0x06048000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,scatter-gather; + + in-ports { + port { + etr_in: endpoint { + remote-endpoint = + <&replicator_out>; + }; + }; + }; + }; + + etm@7040000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07040000 0 0x1000>; + + cpu = <&CPU0>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + etm0_out: endpoint { + remote-endpoint = + <&apss_funnel_in0>; + }; + }; + }; + }; + + etm@7140000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07140000 0 0x1000>; + + cpu = <&CPU1>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + etm1_out: endpoint { + remote-endpoint = + <&apss_funnel_in1>; + }; + }; + }; + }; + + etm@7240000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07240000 0 0x1000>; + + cpu = <&CPU2>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + etm2_out: endpoint { + remote-endpoint = + <&apss_funnel_in2>; + }; + }; + }; + }; + + etm@7340000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07340000 0 0x1000>; + + cpu = <&CPU3>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + etm3_out: endpoint { + remote-endpoint = + <&apss_funnel_in3>; + }; + }; + }; + }; + + etm@7440000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07440000 0 0x1000>; + + cpu = <&CPU4>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + etm4_out: endpoint { + remote-endpoint = + <&apss_funnel_in4>; + }; + }; + }; + }; + + etm@7540000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07540000 0 0x1000>; + + cpu = <&CPU5>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + etm5_out: endpoint { + remote-endpoint = + <&apss_funnel_in5>; + }; + }; + }; + }; + + etm@7640000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07640000 0 0x1000>; + + cpu = <&CPU6>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + etm6_out: endpoint { + remote-endpoint = + <&apss_funnel_in6>; + }; + }; + }; + }; + + etm@7740000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07740000 0 0x1000>; + + cpu = <&CPU7>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + etm7_out: endpoint { + remote-endpoint = + <&apss_funnel_in7>; + }; + }; + }; + }; + + funnel@7800000 { /* APSS Funnel */ + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x07800000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + apss_funnel_out: endpoint { + remote-endpoint = + <&apss_merge_funnel_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + apss_funnel_in0: endpoint { + remote-endpoint = + <&etm0_out>; + }; + }; + + port@1 { + reg = <1>; + apss_funnel_in1: endpoint { + remote-endpoint = + <&etm1_out>; + }; + }; + + port@2 { + reg = <2>; + apss_funnel_in2: endpoint { + remote-endpoint = + <&etm2_out>; + }; + }; + + port@3 { + reg = <3>; + apss_funnel_in3: endpoint { + remote-endpoint = + <&etm3_out>; + }; + }; + + port@4 { + reg = <4>; + apss_funnel_in4: endpoint { + remote-endpoint = + <&etm4_out>; + }; + }; + + port@5 { + reg = <5>; + apss_funnel_in5: endpoint { + remote-endpoint = + <&etm5_out>; + }; + }; + + port@6 { + reg = <6>; + apss_funnel_in6: endpoint { + remote-endpoint = + <&etm6_out>; + }; + }; + + port@7 { + reg = <7>; + apss_funnel_in7: endpoint { + remote-endpoint = + <&etm7_out>; + }; + }; + }; + }; + + funnel@7810000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x07810000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + apss_merge_funnel_out: endpoint { + remote-endpoint = + <&funnel2_in5>; + }; + }; + }; + + in-ports { + port { + apss_merge_funnel_in: endpoint { + remote-endpoint = + <&apss_funnel_out>; + }; + }; + }; + }; + sdhc_2: sdhci@8804000 { compatible = "qcom,sdm845-sdhci", "qcom,sdhci-msm-v5"; reg = <0 0x08804000 0 0x1000>; @@ -1893,6 +2567,36 @@ }; }; + video-codec@aa00000 { + compatible = "qcom,sdm845-venus"; + reg = <0 0x0aa00000 0 0xff000>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&videocc VENUS_GDSC>; + clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>, + <&videocc VIDEO_CC_VENUS_AHB_CLK>, + <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>; + clock-names = "core", "iface", "bus"; + iommus = <&apps_smmu 0x10a0 0x8>, + <&apps_smmu 0x10b0 0x0>; + memory-region = <&venus_mem>; + + video-core0 { + compatible = "venus-decoder"; + clocks = <&videocc VIDEO_CC_VCODEC0_CORE_CLK>, + <&videocc VIDEO_CC_VCODEC0_AXI_CLK>; + clock-names = "core", "bus"; + power-domains = <&videocc VCODEC0_GDSC>; + }; + + video-core1 { + compatible = "venus-encoder"; + clocks = <&videocc VIDEO_CC_VCODEC1_CORE_CLK>, + <&videocc VIDEO_CC_VCODEC1_AXI_CLK>; + clock-names = "core", "bus"; + power-domains = <&videocc VCODEC1_GDSC>; + }; + }; + videocc: clock-controller@ab00000 { compatible = "qcom,sdm845-videocc"; reg = <0 0x0ab00000 0 0x10000>; @@ -1997,9 +2701,6 @@ status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - ports { #address-cells = <1>; #size-cells = <0>; @@ -2064,9 +2765,6 @@ status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - ports { #address-cells = <1>; #size-cells = <0>; @@ -2106,6 +2804,133 @@ }; }; + gpu@5000000 { + compatible = "qcom,adreno-630.2", "qcom,adreno"; + #stream-id-cells = <16>; + + reg = <0 0x5000000 0 0x40000>, <0 0x509e000 0 0x10>; + reg-names = "kgsl_3d0_reg_memory", "cx_mem"; + + /* + * Look ma, no clocks! The GPU clocks and power are + * controlled entirely by the GMU + */ + + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; + + iommus = <&adreno_smmu 0>; + + operating-points-v2 = <&gpu_opp_table>; + + qcom,gmu = <&gmu>; + + zap-shader { + memory-region = <&gpu_mem>; + }; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-710000000 { + opp-hz = /bits/ 64 <710000000>; + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + }; + + opp-675000000 { + opp-hz = /bits/ 64 <675000000>; + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + opp-596000000 { + opp-hz = /bits/ 64 <596000000>; + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + opp-520000000 { + opp-hz = /bits/ 64 <520000000>; + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + opp-414000000 { + opp-hz = /bits/ 64 <414000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + opp-342000000 { + opp-hz = /bits/ 64 <342000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + opp-257000000 { + opp-hz = /bits/ 64 <257000000>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + }; + }; + + adreno_smmu: iommu@5040000 { + compatible = "qcom,sdm845-smmu-v2", "qcom,smmu-v2"; + reg = <0 0x5040000 0 0x10000>; + #iommu-cells = <1>; + #global-interrupts = <2>; + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 364 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 365 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 366 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 367 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 368 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 369 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 370 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 371 IRQ_TYPE_EDGE_RISING>; + clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gcc GCC_GPU_CFG_AHB_CLK>; + clock-names = "bus", "iface"; + + power-domains = <&gpucc GPU_CX_GDSC>; + }; + + gmu: gmu@506a000 { + compatible="qcom,adreno-gmu-630.2", "qcom,adreno-gmu"; + + reg = <0 0x506a000 0 0x30000>, + <0 0xb280000 0 0x10000>, + <0 0xb480000 0 0x10000>; + reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq"; + + interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hfi", "gmu"; + + clocks = <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_CXO_CLK>, + <&gcc GCC_DDRSS_GPU_AXI_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>; + clock-names = "gmu", "cxo", "axi", "memnoc"; + + power-domains = <&gpucc GPU_CX_GDSC>, + <&gpucc GPU_GX_GDSC>; + power-domain-names = "cx", "gx"; + + iommus = <&adreno_smmu 5>; + + operating-points-v2 = <&gmu_opp_table>; + + gmu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + }; + }; + dispcc: clock-controller@af00000 { compatible = "qcom,sdm845-dispcc"; reg = <0 0x0af00000 0 0x10000>; @@ -2142,6 +2967,24 @@ #reset-cells = <1>; }; + aoss_qmp: qmp@c300000 { + compatible = "qcom,sdm845-aoss-qmp"; + reg = <0 0x0c300000 0 0x100000>; + interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>; + mboxes = <&apss_shared 0>; + + #clock-cells = <0>; + #power-domain-cells = <1>; + + cx_cdev: cx { + #cooling-cells = <2>; + }; + + ebi_cdev: ebi { + #cooling-cells = <2>; + }; + }; + spmi_bus: spmi@c440000 { compatible = "qcom,spmi-pmic-arb"; reg = <0 0x0c440000 0 0x1100>, @@ -2267,6 +3110,8 @@ rpmhcc: clock-controller { compatible = "qcom,sdm845-rpmh-clk"; #clock-cells = <1>; + clock-names = "xo"; + clocks = <&xo_board>; }; rpmhpd: power-controller { @@ -2447,13 +3292,13 @@ thermal-sensors = <&tsens0 1>; trips { - cpu0_alert0: trip-point@0 { + cpu0_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "passive"; }; - cpu0_alert1: trip-point@1 { + cpu0_alert1: trip-point1 { temperature = <95000>; hysteresis = <2000>; type = "passive"; @@ -2491,13 +3336,13 @@ thermal-sensors = <&tsens0 2>; trips { - cpu1_alert0: trip-point@0 { + cpu1_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "passive"; }; - cpu1_alert1: trip-point@1 { + cpu1_alert1: trip-point1 { temperature = <95000>; hysteresis = <2000>; type = "passive"; @@ -2535,13 +3380,13 @@ thermal-sensors = <&tsens0 3>; trips { - cpu2_alert0: trip-point@0 { + cpu2_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "passive"; }; - cpu2_alert1: trip-point@1 { + cpu2_alert1: trip-point1 { temperature = <95000>; hysteresis = <2000>; type = "passive"; @@ -2579,13 +3424,13 @@ thermal-sensors = <&tsens0 4>; trips { - cpu3_alert0: trip-point@0 { + cpu3_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "passive"; }; - cpu3_alert1: trip-point@1 { + cpu3_alert1: trip-point1 { temperature = <95000>; hysteresis = <2000>; type = "passive"; @@ -2623,13 +3468,13 @@ thermal-sensors = <&tsens0 7>; trips { - cpu4_alert0: trip-point@0 { + cpu4_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "passive"; }; - cpu4_alert1: trip-point@1 { + cpu4_alert1: trip-point1 { temperature = <95000>; hysteresis = <2000>; type = "passive"; @@ -2667,13 +3512,13 @@ thermal-sensors = <&tsens0 8>; trips { - cpu5_alert0: trip-point@0 { + cpu5_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "passive"; }; - cpu5_alert1: trip-point@1 { + cpu5_alert1: trip-point1 { temperature = <95000>; hysteresis = <2000>; type = "passive"; @@ -2711,13 +3556,13 @@ thermal-sensors = <&tsens0 9>; trips { - cpu6_alert0: trip-point@0 { + cpu6_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "passive"; }; - cpu6_alert1: trip-point@1 { + cpu6_alert1: trip-point1 { temperature = <95000>; hysteresis = <2000>; type = "passive"; @@ -2755,13 +3600,13 @@ thermal-sensors = <&tsens0 10>; trips { - cpu7_alert0: trip-point@0 { + cpu7_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "passive"; }; - cpu7_alert1: trip-point@1 { + cpu7_alert1: trip-point1 { temperature = <95000>; hysteresis = <2000>; type = "passive"; @@ -2799,7 +3644,7 @@ thermal-sensors = <&tsens0 0>; trips { - aoss0_alert0: trip-point@0 { + aoss0_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; @@ -2814,7 +3659,7 @@ thermal-sensors = <&tsens0 5>; trips { - cluster0_alert0: trip-point@0 { + cluster0_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; @@ -2834,7 +3679,7 @@ thermal-sensors = <&tsens0 6>; trips { - cluster1_alert0: trip-point@0 { + cluster1_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; @@ -2854,7 +3699,7 @@ thermal-sensors = <&tsens0 11>; trips { - gpu1_alert0: trip-point@0 { + gpu1_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; @@ -2869,7 +3714,7 @@ thermal-sensors = <&tsens0 12>; trips { - gpu2_alert0: trip-point@0 { + gpu2_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; @@ -2884,7 +3729,7 @@ thermal-sensors = <&tsens1 0>; trips { - aoss1_alert0: trip-point@0 { + aoss1_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; @@ -2899,7 +3744,7 @@ thermal-sensors = <&tsens1 1>; trips { - q6_modem_alert0: trip-point@0 { + q6_modem_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; @@ -2914,7 +3759,7 @@ thermal-sensors = <&tsens1 2>; trips { - mem_alert0: trip-point@0 { + mem_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; @@ -2929,7 +3774,7 @@ thermal-sensors = <&tsens1 3>; trips { - wlan_alert0: trip-point@0 { + wlan_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; @@ -2944,7 +3789,7 @@ thermal-sensors = <&tsens1 4>; trips { - q6_hvx_alert0: trip-point@0 { + q6_hvx_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; @@ -2959,7 +3804,7 @@ thermal-sensors = <&tsens1 5>; trips { - camera_alert0: trip-point@0 { + camera_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; @@ -2974,7 +3819,7 @@ thermal-sensors = <&tsens1 6>; trips { - video_alert0: trip-point@0 { + video_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; @@ -2989,7 +3834,7 @@ thermal-sensors = <&tsens1 7>; trips { - modem_alert0: trip-point@0 { + modem_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts new file mode 100644 index 000000000000..ded120d3aef5 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts @@ -0,0 +1,446 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Lenovo Yoga C630 + * + * Copyright (c) 2019, Linaro Ltd. + */ + +/dts-v1/; + +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sdm845.dtsi" +#include "pm8998.dtsi" + +/ { + model = "Lenovo Yoga C630"; + compatible = "lenovo,yoga-c630", "qcom,sdm845"; + + aliases { + hsuart0 = &uart6; + }; +}; + +&apps_rsc { + pm8998-rpmh-regulators { + compatible = "qcom,pm8998-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>; + + vreg_s2a_1p125: smps2 { + }; + + vreg_s3a_1p35: smps3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s4a_1p8: smps4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5a_2p04: smps5 { + regulator-min-microvolt = <2040000>; + regulator-max-microvolt = <2040000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s7a_1p025: smps7 { + }; + + vdd_qusb_hs0: + vdda_hp_pcie_core: + vdda_mipi_csi0_0p9: + vdda_mipi_csi1_0p9: + vdda_mipi_csi2_0p9: + vdda_mipi_dsi0_pll: + vdda_mipi_dsi1_pll: + vdda_qlink_lv: + vdda_qlink_lv_ck: + vdda_qrefs_0p875: + vdda_pcie_core: + vdda_pll_cc_ebi01: + vdda_pll_cc_ebi23: + vdda_sp_sensor: + vdda_ufs1_core: + vdda_ufs2_core: + vdda_usb1_ss_core: + vdda_usb2_ss_core: + vreg_l1a_0p875: ldo1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_10: + vreg_l2a_1p2: ldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_l3a_1p0: ldo3 { + }; + + vdd_wcss_cx: + vdd_wcss_mx: + vdda_wcss_pll: + vreg_l5a_0p8: ldo5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_13: + vreg_l6a_1p8: ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8a_1p2: ldo8 { + }; + + vreg_l9a_1p8: ldo9 { + }; + + vreg_l10a_1p8: ldo10 { + }; + + vreg_l11a_1p0: ldo11 { + }; + + vdd_qfprom: + vdd_qfprom_sp: + vdda_apc1_cs_1p8: + vdda_gfx_cs_1p8: + vdda_qrefs_1p8: + vdda_qusb_hs0_1p8: + vddpx_11: + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_2: + vreg_l13a_2p95: ldo13 { + }; + + vreg_l14a_1p88: ldo14 { + regulator-min-microvolt = <1880000>; + regulator-max-microvolt = <1880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_l15a_1p8: ldo15 { + }; + + vreg_l16a_2p7: ldo16 { + }; + + vreg_l17a_1p3: ldo17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l18a_2p7: ldo18 { + }; + + vreg_l19a_3p0: ldo19 { + regulator-min-microvolt = <3100000>; + regulator-max-microvolt = <3108000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l20a_2p95: ldo20 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l21a_2p95: ldo21 { + }; + + vreg_l22a_2p85: ldo22 { + }; + + vreg_l23a_3p3: ldo23 { + }; + + vdda_qusb_hs0_3p1: + vreg_l24a_3p075: ldo24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3083000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l25a_3p3: ldo25 { + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3112000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_hp_pcie_1p2: + vdda_hv_ebi0: + vdda_hv_ebi1: + vdda_hv_ebi2: + vdda_hv_ebi3: + vdda_mipi_csi_1p25: + vdda_mipi_dsi0_1p2: + vdda_mipi_dsi1_1p2: + vdda_pcie_1p2: + vdda_ufs1_1p2: + vdda_ufs2_1p2: + vdda_usb1_ss_1p2: + vdda_usb2_ss_1p2: + vreg_l26a_1p2: ldo26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1208000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l28a_3p0: ldo28 { + }; + + vreg_lvs1a_1p8: lvs1 { + }; + + vreg_lvs2a_1p8: lvs2 { + }; + }; +}; + +&apps_smmu { + /* TODO: Figure out how to survive booting with this enabled */ + status = "disabled"; +}; + +&gcc { + protected-clocks = <GCC_QSPI_CORE_CLK>, + <GCC_QSPI_CORE_CLK_SRC>, + <GCC_QSPI_CNOC_PERIPH_AHB_CLK>; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; +}; + +&i2c3 { + status = "okay"; + clock-frequency = <400000>; + + hid@15 { + compatible = "hid-over-i2c"; + reg = <0x15>; + hid-descr-addr = <0x1>; + + interrupts-extended = <&tlmm 37 IRQ_TYPE_EDGE_RISING>; + }; + + hid@2c { + compatible = "hid-over-i2c"; + reg = <0x2c>; + hid-descr-addr = <0x20>; + + interrupts-extended = <&tlmm 37 IRQ_TYPE_EDGE_RISING>; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_hid_active>; + }; +}; + +&i2c5 { + status = "okay"; + clock-frequency = <400000>; + + hid@10 { + compatible = "hid-over-i2c"; + reg = <0x10>; + hid-descr-addr = <0x1>; + + interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c6_hid_active>; + }; +}; + +&i2c11 { + status = "okay"; + clock-frequency = <400000>; + + hid@5c { + compatible = "hid-over-i2c"; + reg = <0x5c>; + hid-descr-addr = <0x1>; + + interrupts-extended = <&tlmm 92 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c12_hid_active>; + }; +}; + +&qup_i2c12_default { + drive-strength = <2>; + bias-disable; +}; + +&qup_uart6_default { + pinmux { + pins = "gpio45", "gpio46", "gpio47", "gpio48"; + function = "qup6"; + }; + + cts { + pins = "gpio45"; + bias-pull-down; + }; + + rts-tx { + pins = "gpio46", "gpio47"; + drive-strength = <2>; + bias-disable; + }; + + rx { + pins = "gpio48"; + bias-pull-up; + }; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <81 4>; + + i2c2_hid_active: i2c2-hid-active { + pins = <37>; + function = "gpio"; + + input-enable; + bias-pull-up; + drive-strength = <2>; + }; + + i2c6_hid_active: i2c6-hid-active { + pins = <125>; + function = "gpio"; + + input-enable; + bias-pull-up; + drive-strength = <2>; + }; + + i2c12_hid_active: i2c12-hid-active { + pins = <92>; + function = "gpio"; + + input-enable; + bias-pull-up; + drive-strength = <2>; + }; +}; + +&uart6 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + max-speed = <3200000>; + }; +}; + +&ufs_mem_hc { + status = "okay"; + + vcc-supply = <&vreg_l20a_2p95>; + vcc-max-microamp = <600000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vdda_ufs1_core>; + vdda-pll-supply = <&vdda_ufs1_1p2>; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "host"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdd-supply = <&vdda_usb1_ss_core>; + vdda-pll-supply = <&vdda_qusb_hs0_1p8>; + vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>; + qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>; + qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vdda_usb1_ss_1p2>; + vdda-pll-supply = <&vdda_usb1_ss_core>; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_2_dwc3 { + dr_mode = "host"; +}; + +&usb_2_hsphy { + status = "okay"; + + vdd-supply = <&vdda_usb2_ss_core>; + vdda-pll-supply = <&vdda_qusb_hs0_1p8>; + vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>; +}; + +&usb_2_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vdda_usb2_ss_1p2>; + vdda-pll-supply = <&vdda_usb2_ss_core>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts new file mode 100644 index 000000000000..aa5de42fcae4 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts @@ -0,0 +1,375 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved. + * Copyright (c) 2019, Linaro Limited + */ + +/dts-v1/; + +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sm8150.dtsi" +#include "pm8150.dtsi" +#include "pm8150b.dtsi" +#include "pm8150l.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. SM8150 MTP"; + compatible = "qcom,sm8150-mtp"; + + aliases { + serial0 = &uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + /* + * Apparently RPMh does not provide support for PM8150 S4 because it + * is always-on; model it as a fixed regulator. + */ + vreg_s4a_1p8: pm8150-s4 { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; +}; + +&apps_rsc { + pm8150-rpmh-regulators { + compatible = "qcom,pm8150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + + vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>; + vdd-l2-l10-supply = <&vreg_bob>; + vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p9>; + vdd-l6-l9-supply = <&vreg_s8c_1p3>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p0>; + vdd-l13-l16-l17-supply = <&vreg_bob>; + + vreg_s5a_2p0: smps5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2000000>; + }; + + vreg_s6a_0p9: smps6 { + regulator-min-microvolt = <920000>; + regulator-max-microvolt = <1128000>; + }; + + vdda_wcss_pll: + vreg_l1a_0p75: ldo1 { + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <752000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd_pdphy: + vdda_usb_hs_3p1: + vreg_l2a_3p1: ldo2 { + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3a_0p8: ldo3 { + regulator-min-microvolt = <480000>; + regulator-max-microvolt = <932000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd_usb_hs_core: + vdda_csi_0_0p9: + vdda_csi_1_0p9: + vdda_csi_2_0p9: + vdda_csi_3_0p9: + vdda_dsi_0_0p9: + vdda_dsi_1_0p9: + vdda_dsi_0_pll_0p9: + vdda_dsi_1_pll_0p9: + vdda_pcie_1ln_core: + vdda_pcie_2ln_core: + vdda_pll_hv_cc_ebi01: + vdda_pll_hv_cc_ebi23: + vdda_qrefs_0p875_5: + vdda_sp_sensor: + vdda_ufs_2ln_core_1: + vdda_ufs_2ln_core_2: + vdda_usb_ss_dp_core_1: + vdda_usb_ss_dp_core_2: + vdda_qlink_lv: + vdda_qlink_lv_ck: + vreg_l5a_0p875: ldo5 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6a_1p2: ldo6 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_10: + vreg_l9a_1p2: ldo9 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10a_2p5: ldo10 { + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11a_0p8: ldo11 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd_qfprom: + vdd_qfprom_sp: + vdda_apc_cs_1p8: + vdda_gfx_cs_1p8: + vdda_usb_hs_1p8: + vdda_qrefs_vref_1p8: + vddpx_10_a: + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13a_2p7: ldo13 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14a_1p8: ldo14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15a_1p7: ldo15 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1704000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16a_2p7: ldo16 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17a_3p0: ldo17 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pm8150l-rpmh-regulators { + compatible = "qcom,pm8150l-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + + vdd-l1-l8-supply = <&vreg_s4a_1p8>; + vdd-l2-l3-supply = <&vreg_s8c_1p3>; + vdd-l4-l5-l6-supply = <&vreg_bob>; + vdd-l7-l11-supply = <&vreg_bob>; + vdd-l9-l10-supply = <&vreg_bob>; + + vdd-bob-supply = <&vph_pwr>; + vdd-flash-supply = <&vreg_bob>; + vdd-rgb-supply = <&vreg_bob>; + + vreg_bob: bob { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <4000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-bypass; + }; + + vreg_s8c_1p3: smps8 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_l1c_1p8: ldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_wcss_adcdac_1: + vdda_wcss_adcdac_22: + vreg_l2c_1p3: ldo2 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_hv_ebi0: + vdda_hv_ebi1: + vdda_hv_ebi2: + vdda_hv_ebi3: + vdda_hv_refgen0: + vdda_qlink_hv_ck: + vreg_l3c_1p2: ldo3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_5: + vreg_l4c_1p8: ldo4 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_6: + vreg_l5c_1p8: ldo5 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_2: + vreg_l6c_2p9: ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7c_3p0: ldo7 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8c_1p8: ldo8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9c_2p9: ldo9 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10c_3p3: ldo10 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11c_3p3: ldo11 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pm8009-rpmh-regulators { + compatible = "qcom,pm8009-rpmh-regulators"; + qcom,pmic-id = "f"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vreg_bob>; + + vdd-l2-supply = <&vreg_s8c_1p3>; + vdd-l5-l6-supply = <&vreg_bob>; + + vreg_l2f_1p2: ldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5f_2p85: ldo5 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6f_2p85: ldo6 { + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <2856000>; + }; + }; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&pon { + pwrkey { + status = "okay"; + }; + + resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 0x1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_VOLUMEDOWN>; + }; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <126 4>; +}; + +&uart2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi new file mode 100644 index 000000000000..8f23fcadecb8 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -0,0 +1,482 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved. + * Copyright (c) 2019, Linaro Limited + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/soc/qcom,rpmh-rsc.h> +#include <dt-bindings/clock/qcom,rpmh.h> + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <38400000>; + clock-output-names = "xo_board"; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32764>; + clock-output-names = "sleep_clk"; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + L3_0: l3-cache { + compatible = "cache"; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x100>; + enable-method = "psci"; + next-level-cache = <&L2_100>; + L2_100: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x200>; + enable-method = "psci"; + next-level-cache = <&L2_200>; + L2_200: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x300>; + enable-method = "psci"; + next-level-cache = <&L2_300>; + L2_300: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU4: cpu@400 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x400>; + enable-method = "psci"; + next-level-cache = <&L2_400>; + L2_400: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU5: cpu@500 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x500>; + enable-method = "psci"; + next-level-cache = <&L2_500>; + L2_500: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU6: cpu@600 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x600>; + enable-method = "psci"; + next-level-cache = <&L2_600>; + L2_600: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU7: cpu@700 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x700>; + enable-method = "psci"; + next-level-cache = <&L2_700>; + L2_700: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-sm8150", "qcom,scm"; + #reset-cells = <1>; + }; + }; + + tcsr_mutex: hwlock { + compatible = "qcom,tcsr-mutex"; + syscon = <&tcsr_mutex_regs 0 0x1000>; + #hwlock-cells = <1>; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0x80000000 0x0 0x0>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: memory@85700000 { + reg = <0x0 0x85700000 0x0 0x600000>; + no-map; + }; + + xbl_mem: memory@85d00000 { + reg = <0x0 0x85d00000 0x0 0x140000>; + no-map; + }; + + aop_mem: memory@85f00000 { + reg = <0x0 0x85f00000 0x0 0x20000>; + no-map; + }; + + aop_cmd_db: memory@85f20000 { + compatible = "qcom,cmd-db"; + reg = <0x0 0x85f20000 0x0 0x20000>; + no-map; + }; + + smem_mem: memory@86000000 { + reg = <0x0 0x86000000 0x0 0x200000>; + no-map; + }; + + tz_mem: memory@86200000 { + reg = <0x0 0x86200000 0x0 0x3900000>; + no-map; + }; + + rmtfs_mem: memory@89b00000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x89b00000 0x0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + + camera_mem: memory@8b700000 { + reg = <0x0 0x8b700000 0x0 0x500000>; + no-map; + }; + + wlan_mem: memory@8bc00000 { + reg = <0x0 0x8bc00000 0x0 0x180000>; + no-map; + }; + + npu_mem: memory@8bd80000 { + reg = <0x0 0x8bd80000 0x0 0x80000>; + no-map; + }; + + adsp_mem: memory@8be00000 { + reg = <0x0 0x8be00000 0x0 0x1a00000>; + no-map; + }; + + mpss_mem: memory@8d800000 { + reg = <0x0 0x8d800000 0x0 0x9600000>; + no-map; + }; + + venus_mem: memory@96e00000 { + reg = <0x0 0x96e00000 0x0 0x500000>; + no-map; + }; + + slpi_mem: memory@97300000 { + reg = <0x0 0x97300000 0x0 0x1400000>; + no-map; + }; + + ipa_fw_mem: memory@98700000 { + reg = <0x0 0x98700000 0x0 0x10000>; + no-map; + }; + + ipa_gsi_mem: memory@98710000 { + reg = <0x0 0x98710000 0x0 0x5000>; + no-map; + }; + + gpu_mem: memory@98715000 { + reg = <0x0 0x98715000 0x0 0x2000>; + no-map; + }; + + spss_mem: memory@98800000 { + reg = <0x0 0x98800000 0x0 0x100000>; + no-map; + }; + + cdsp_mem: memory@98900000 { + reg = <0x0 0x98900000 0x0 0x1400000>; + no-map; + }; + + qseecom_mem: memory@9e400000 { + reg = <0x0 0x9e400000 0x0 0x1400000>; + no-map; + }; + }; + + smem { + compatible = "qcom,smem"; + memory-region = <&smem_mem>; + hwlocks = <&tcsr_mutex 3>; + }; + + soc: soc@0 { + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + dma-ranges = <0 0 0 0 0x10 0>; + compatible = "simple-bus"; + + gcc: clock-controller@100000 { + compatible = "qcom,gcc-sm8150"; + reg = <0x0 0x00100000 0x0 0x1f0000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clock-names = "bi_tcxo", + "sleep_clk"; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>; + }; + + qupv3_id_1: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x00ac0000 0x0 0x6000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc 123>, + <&gcc 124>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + uart2: serial@a90000 { + compatible = "qcom,geni-debug-uart"; + reg = <0x0 0x00a90000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc 105>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + tcsr_mutex_regs: syscon@1f40000 { + compatible = "syscon"; + reg = <0x0 0x01f40000 0x0 0x40000>; + }; + + tlmm: pinctrl@3100000 { + compatible = "qcom,sm8150-pinctrl"; + reg = <0x0 0x03100000 0x0 0x300000>, + <0x0 0x03500000 0x0 0x300000>, + <0x0 0x03900000 0x0 0x300000>, + <0x0 0x03D00000 0x0 0x300000>; + reg-names = "west", "east", "north", "south"; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-ranges = <&tlmm 0 0 175>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + aoss_qmp: power-controller@c300000 { + compatible = "qcom,sm8150-aoss-qmp"; + reg = <0x0 0x0c300000 0x0 0x100000>; + interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>; + mboxes = <&apss_shared 0>; + + #clock-cells = <0>; + #power-domain-cells = <1>; + }; + + spmi_bus: spmi@c440000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0 0x0c440000 0x0 0x0001100>, + <0x0 0x0c600000 0x0 0x2000000>, + <0x0 0x0e600000 0x0 0x0100000>, + <0x0 0x0e700000 0x0 0x00a0000>, + <0x0 0x0c40a000 0x0 0x0026000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = <GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + cell-index = <0>; + }; + + intc: interrupt-controller@17a00000 { + compatible = "arm,gic-v3"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */ + <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + apss_shared: mailbox@17c00000 { + compatible = "qcom,sm8150-apss-shared"; + reg = <0x0 0x17c00000 0x0 0x1000>; + #mbox-cells = <1>; + }; + + timer@17c20000 { + #address-cells = <2>; + #size-cells = <2>; + ranges; + compatible = "arm,armv7-timer-mem"; + reg = <0x0 0x17c20000 0x0 0x1000>; + clock-frequency = <19200000>; + + frame@17c21000{ + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17c21000 0x0 0x1000>, + <0x0 0x17c22000 0x0 0x1000>; + }; + + frame@17c23000 { + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17c23000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c25000 { + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17c25000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c27000 { + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17c26000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c29000 { + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17c29000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c2b000 { + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17c2b000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c2d000 { + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17c2d000 0x0 0x1000>; + status = "disabled"; + }; + }; + + apps_rsc: rsc@18200000 { + label = "apps_rsc"; + compatible = "qcom,rpmh-rsc"; + reg = <0x0 0x18200000 0x0 0x10000>, + <0x0 0x18210000 0x0 0x10000>, + <0x0 0x18220000 0x0 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2"; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = <ACTIVE_TCS 2>, + <SLEEP_TCS 1>, + <WAKE_TCS 1>, + <CONTROL_TCS 0>; + + rpmhcc: clock-controller { + compatible = "qcom,sm8150-rpmh-clk"; + #clock-cells = <1>; + clock-names = "xo"; + clocks = <&xo_board>; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile index 6cde526547e4..42b74c283289 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile @@ -1,4 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 +dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m.dtb +dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-ex.dtb dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-cat874.dtb r8a774c0-ek874.dtb dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x.dtb r8a7795-h3ulcb.dtb dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-kf.dtb diff --git a/arch/arm64/boot/dts/renesas/hihope-common.dtsi b/arch/arm64/boot/dts/renesas/hihope-common.dtsi new file mode 100644 index 000000000000..3e376d29a730 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/hihope-common.dtsi @@ -0,0 +1,451 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the HiHope RZ/G2[MN] main board common parts + * + * Copyright (C) 2019 Renesas Electronics Corp. + */ + +#include <dt-bindings/gpio/gpio.h> + +/ { + aliases { + serial0 = &scif2; + serial1 = &hscif0; + }; + + chosen { + bootargs = "ignore_loglevel"; + stdout-path = "serial0:115200n8"; + }; + + hdmi0-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi0_con: endpoint { + remote-endpoint = <&rcar_dw_hdmi0_out>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + bt_active_led { + label = "blue:bt"; + gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "hci0-power"; + default-state = "off"; + }; + + led0 { + gpios = <&gpio6 11 GPIO_ACTIVE_HIGH>; + }; + + led1 { + gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; + }; + + led2 { + gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>; + }; + + led3 { + gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; + }; + + wlan_active_led { + label = "yellow:wlan"; + gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + }; + + reg_1p8v: regulator0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator1 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + sound_card: sound { + compatible = "audio-graph-card"; + + label = "rcar-sound"; + + dais = <&rsnd_port0>; + }; + + vbus0_usb2: regulator-vbus0-usb2 { + compatible = "regulator-fixed"; + + regulator-name = "USB20_VBUS0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio6 16 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vccq_sdhi0: regulator-vccq-sdhi0 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI0 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1 + 1800000 0>; + }; + + wlan_en_reg: regulator-wlan_en { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + startup-delay-us = <70000>; + + gpio = <&gpio_expander 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + x302_clk: x302-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <33000000>; + }; + + x304_clk: x304-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; +}; + +&audio_clk_a { + clock-frequency = <22579200>; +}; + +&du { + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 722>, + <&versaclock5 1>, + <&x302_clk>, + <&versaclock5 2>; + clock-names = "du.0", "du.1", "du.2", + "dclkin.0", "dclkin.1", "dclkin.2"; + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&extal_clk { + clock-frequency = <16666666>; +}; + +&extalr_clk { + clock-frequency = <32768>; +}; + +&gpio6 { + usb1-reset { + gpio-hog; + gpios = <10 GPIO_ACTIVE_LOW>; + output-low; + line-name = "usb1-reset"; + }; +}; + +&hdmi0 { + status = "okay"; + + ports { + port@1 { + reg = <1>; + rcar_dw_hdmi0_out: endpoint { + remote-endpoint = <&hdmi0_con>; + }; + }; + port@2 { + reg = <2>; + dw_hdmi0_snd_in: endpoint { + remote-endpoint = <&rsnd_endpoint0>; + }; + }; + }; +}; + +&hscif0 { + pinctrl-0 = <&hscif0_pins>; + pinctrl-names = "default"; + + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "ti,wl1837-st"; + enable-gpios = <&gpio_expander 2 GPIO_ACTIVE_HIGH>; + }; +}; + +&hsusb { + dr_mode = "otg"; + status = "okay"; +}; + +&i2c4 { + clock-frequency = <400000>; + status = "okay"; + + gpio_expander: gpio@20 { + compatible = "onnn,pca9654"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + + versaclock5: clock-generator@6a { + compatible = "idt,5p49v5923"; + reg = <0x6a>; + #clock-cells = <1>; + clocks = <&x304_clk>; + clock-names = "xin"; + }; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pcie_bus_clk { + clock-frequency = <100000000>; +}; + +&pfc { + pinctrl-0 = <&scif_clk_pins>; + pinctrl-names = "default"; + + hscif0_pins: hscif0 { + groups = "hscif0_data", "hscif0_ctrl"; + function = "hscif0"; + }; + + scif2_pins: scif2 { + groups = "scif2_data_a"; + function = "scif2"; + }; + + scif_clk_pins: scif_clk { + groups = "scif_clk_a"; + function = "scif_clk"; + }; + + sdhi0_pins: sd0 { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <3300>; + }; + + sdhi0_pins_uhs: sd0_uhs { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <1800>; + }; + + sdhi2_pins: sd2 { + groups = "sdhi2_data4", "sdhi2_ctrl"; + function = "sdhi2"; + power-source = <1800>; + }; + + sdhi3_pins: sd3 { + groups = "sdhi3_data8", "sdhi3_ctrl", "sdhi3_ds"; + function = "sdhi3"; + power-source = <1800>; + }; + + sound_clk_pins: sound_clk { + groups = "audio_clk_a_a"; + function = "audio_clk"; + }; + + usb0_pins: usb0 { + groups = "usb0"; + function = "usb0"; + }; + + usb1_pins: usb1 { + mux { + groups = "usb1"; + function = "usb1"; + }; + + ovc { + pins = "GP_6_27"; + bias-pull-up; + }; + }; + + usb30_pins: usb30 { + groups = "usb30"; + function = "usb30"; + }; +}; + +&rcar_sound { + pinctrl-0 = <&sound_clk_pins>; + pinctrl-names = "default"; + + status = "okay"; + + /* Single DAI */ + #sound-dai-cells = <0>; + + ports { + rsnd_port0: port@0 { + rsnd_endpoint0: endpoint { + remote-endpoint = <&dw_hdmi0_snd_in>; + + dai-format = "i2s"; + bitclock-master = <&rsnd_endpoint0>; + frame-master = <&rsnd_endpoint0>; + + playback = <&ssi2>; + }; + }; + }; +}; + +&rwdt { + timeout-sec = <60>; + status = "okay"; +}; + +&scif2 { + pinctrl-0 = <&scif2_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&scif_clk { + clock-frequency = <14745600>; +}; + +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-1 = <&sdhi0_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <&vccq_sdhi0>; + cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; + bus-width = <4>; + sd-uhs-sdr50; + sd-uhs-sdr104; + status = "okay"; +}; + +&sdhi2 { + status = "okay"; + pinctrl-0 = <&sdhi2_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&wlan_en_reg>; + bus-width = <4>; + non-removable; + cap-power-off-card; + keep-power-in-suspend; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1837"; + reg = <2>; + interrupt-parent = <&gpio2>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + +&sdhi3 { + pinctrl-0 = <&sdhi3_pins>; + pinctrl-1 = <&sdhi3_pins>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + bus-width = <8>; + mmc-hs200-1_8v; + non-removable; + fixed-emmc-driver-type = <1>; + status = "okay"; +}; + +&usb_extal_clk { + clock-frequency = <50000000>; +}; + +&usb2_phy0 { + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; + + vbus-supply = <&vbus0_usb2>; + status = "okay"; +}; + +&usb2_phy1 { + pinctrl-0 = <&usb1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&usb3_peri0 { + phys = <&usb3_phy0>; + phy-names = "usb"; + + companion = <&xhci0>; + + status = "okay"; +}; + +&usb3_phy0 { + status = "okay"; +}; + +&usb3s0_clk { + clock-frequency = <100000000>; +}; + +&xhci0 { + pinctrl-0 = <&usb30_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi new file mode 100644 index 000000000000..4280b190dc68 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi @@ -0,0 +1,85 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the RZ/G2[MN] HiHope sub board common parts + * + * Copyright (C) 2019 Renesas Electronics Corp. + */ + +/ { + aliases { + ethernet0 = &avb; + }; + + chosen { + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; + }; +}; + +&avb { + pinctrl-0 = <&avb_pins>; + pinctrl-names = "default"; + phy-handle = <&phy0>; + phy-mode = "rgmii-txid"; + status = "okay"; + + phy0: ethernet-phy@0 { + rxc-skew-ps = <1500>; + reg = <0>; + interrupt-parent = <&gpio2>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; + }; +}; + +&can0 { + pinctrl-0 = <&can0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&can1 { + pinctrl-0 = <&can1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&pciec0 { + status = "okay"; +}; + +&pciec1 { + status = "okay"; +}; + +&pfc { + pinctrl-0 = <&scif_clk_pins>; + pinctrl-names = "default"; + + avb_pins: avb { + mux { + groups = "avb_link", "avb_mdio", "avb_mii"; + function = "avb"; + }; + + pins_mdio { + groups = "avb_mdio"; + drive-strength = <24>; + }; + + pins_mii_tx { + pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0", + "PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3"; + drive-strength = <12>; + }; + }; + + can0_pins: can0 { + groups = "can0_data_a"; + function = "can0"; + }; + + can1_pins: can1 { + groups = "can1_data"; + function = "can1"; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex.dts b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex.dts new file mode 100644 index 000000000000..6e33a3b27706 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the HiHope RZ/G2M sub board + * + * Copyright (C) 2019 Renesas Electronics Corp. + */ + +#include "r8a774a1-hihope-rzg2m.dts" +#include "hihope-rzg2-ex.dtsi" + +/ { + model = "HopeRun HiHope RZ/G2M with sub board"; + compatible = "hoperun,hihope-rzg2-ex", "hoperun,hihope-rzg2m", + "renesas,r8a774a1"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m.dts b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m.dts new file mode 100644 index 000000000000..93ca973c856c --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the HiHope RZ/G2M main board + * + * Copyright (C) 2019 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r8a774a1.dtsi" +#include "hihope-common.dtsi" + +/ { + model = "HopeRun HiHope RZ/G2M main board based on r8a774a1"; + compatible = "hoperun,hihope-rzg2m", "renesas,r8a774a1"; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x78000000>; + }; + + memory@600000000 { + device_type = "memory"; + reg = <0x6 0x00000000 0x0 0x80000000>; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi index de282c4794ed..06c7c849c8ab 100644 --- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi @@ -56,10 +56,78 @@ clock-frequency = <0>; }; + cluster0_opp: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1500000000 { + opp-hz = /bits/ 64 <1500000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + }; + + cluster1_opp: opp_table1 { + compatible = "operating-points-v2"; + opp-shared; + + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>; + cpu-map { + cluster0 { + core0 { + cpu = <&a57_0>; + }; + core1 { + cpu = <&a57_1>; + }; + }; + + cluster1 { + core0 { + cpu = <&a53_0>; + }; + core1 { + cpu = <&a53_1>; + }; + core2 { + cpu = <&a53_2>; + }; + core3 { + cpu = <&a53_3>; + }; + }; + }; + a57_0: cpu@0 { compatible = "arm,cortex-a57"; reg = <0x0>; @@ -67,7 +135,11 @@ power-domains = <&sysc R8A774A1_PD_CA57_CPU0>; next-level-cache = <&L2_CA57>; enable-method = "psci"; + dynamic-power-coefficient = <854>; clocks = <&cpg CPG_CORE R8A774A1_CLK_Z>; + operating-points-v2 = <&cluster0_opp>; + capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; }; a57_1: cpu@1 { @@ -78,6 +150,9 @@ next-level-cache = <&L2_CA57>; enable-method = "psci"; clocks = <&cpg CPG_CORE R8A774A1_CLK_Z>; + operating-points-v2 = <&cluster0_opp>; + capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; }; a53_0: cpu@100 { @@ -87,7 +162,11 @@ power-domains = <&sysc R8A774A1_PD_CA53_CPU0>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + #cooling-cells = <2>; + dynamic-power-coefficient = <277>; clocks = <&cpg CPG_CORE R8A774A1_CLK_Z2>; + operating-points-v2 = <&cluster1_opp>; + capacity-dmips-mhz = <560>; }; a53_1: cpu@101 { @@ -98,6 +177,8 @@ next-level-cache = <&L2_CA53>; enable-method = "psci"; clocks = <&cpg CPG_CORE R8A774A1_CLK_Z2>; + operating-points-v2 = <&cluster1_opp>; + capacity-dmips-mhz = <560>; }; a53_2: cpu@102 { @@ -108,6 +189,8 @@ next-level-cache = <&L2_CA53>; enable-method = "psci"; clocks = <&cpg CPG_CORE R8A774A1_CLK_Z2>; + operating-points-v2 = <&cluster1_opp>; + capacity-dmips-mhz = <560>; }; a53_3: cpu@103 { @@ -118,6 +201,8 @@ next-level-cache = <&L2_CA53>; enable-method = "psci"; clocks = <&cpg CPG_CORE R8A774A1_CLK_Z2>; + operating-points-v2 = <&cluster1_opp>; + capacity-dmips-mhz = <560>; }; L2_CA57: cache-controller-0 { @@ -326,6 +411,76 @@ reg = <0 0xe6060000 0 0x50c>; }; + cmt0: timer@e60f0000 { + compatible = "renesas,r8a774a1-cmt0", + "renesas,rcar-gen3-cmt0"; + reg = <0 0xe60f0000 0 0x1004>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 303>; + clock-names = "fck"; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 303>; + status = "disabled"; + }; + + cmt1: timer@e6130000 { + compatible = "renesas,r8a774a1-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6130000 0 0x1004>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 302>; + clock-names = "fck"; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 302>; + status = "disabled"; + }; + + cmt2: timer@e6140000 { + compatible = "renesas,r8a774a1-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6140000 0 0x1004>; + interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 301>; + clock-names = "fck"; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 301>; + status = "disabled"; + }; + + cmt3: timer@e6148000 { + compatible = "renesas,r8a774a1-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6148000 0 0x1004>; + interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 300>; + clock-names = "fck"; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 300>; + status = "disabled"; + }; + cpg: clock-controller@e6150000 { compatible = "renesas,r8a774a1-cpg-mssr"; reg = <0 0xe6150000 0 0x0bb0>; @@ -377,6 +532,71 @@ resets = <&cpg 407>; }; + tmu0: timer@e61e0000 { + compatible = "renesas,tmu-r8a774a1", "renesas,tmu"; + reg = <0 0xe61e0000 0 0x30>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 125>; + clock-names = "fck"; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 125>; + status = "disabled"; + }; + + tmu1: timer@e6fc0000 { + compatible = "renesas,tmu-r8a774a1", "renesas,tmu"; + reg = <0 0xe6fc0000 0 0x30>; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 124>; + clock-names = "fck"; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 124>; + status = "disabled"; + }; + + tmu2: timer@e6fd0000 { + compatible = "renesas,tmu-r8a774a1", "renesas,tmu"; + reg = <0 0xe6fd0000 0 0x30>; + interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 123>; + clock-names = "fck"; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 123>; + status = "disabled"; + }; + + tmu3: timer@e6fe0000 { + compatible = "renesas,tmu-r8a774a1", "renesas,tmu"; + reg = <0 0xe6fe0000 0 0x30>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 122>; + clock-names = "fck"; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 122>; + status = "disabled"; + }; + + tmu4: timer@ffc00000 { + compatible = "renesas,tmu-r8a774a1", "renesas,tmu"; + reg = <0 0xffc00000 0 0x30>; + interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 121>; + clock-names = "fck"; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 121>; + status = "disabled"; + }; + i2c0: i2c@e6500000 { #address-cells = <1>; #size-cells = <0>; @@ -601,15 +821,15 @@ "renesas,rcar-gen3-usbhs"; reg = <0 0xe6590000 0 0x200>; interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 704>; + clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>; dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, <&usb_dmac1 0>, <&usb_dmac1 1>; dma-names = "ch0", "ch1", "ch2", "ch3"; renesas,buswait = <11>; - phys = <&usb2_phy0>; + phys = <&usb2_phy0 3>; phy-names = "usb"; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; - resets = <&cpg 704>; + resets = <&cpg 704>, <&cpg 703>; status = "disabled"; }; @@ -686,6 +906,14 @@ resets = <&cpg 219>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>, + <&ipmmu_ds0 2>, <&ipmmu_ds0 3>, + <&ipmmu_ds0 4>, <&ipmmu_ds0 5>, + <&ipmmu_ds0 6>, <&ipmmu_ds0 7>, + <&ipmmu_ds0 8>, <&ipmmu_ds0 9>, + <&ipmmu_ds0 10>, <&ipmmu_ds0 11>, + <&ipmmu_ds0 12>, <&ipmmu_ds0 13>, + <&ipmmu_ds0 14>, <&ipmmu_ds0 15>; }; dmac1: dma-controller@e7300000 { @@ -720,6 +948,14 @@ resets = <&cpg 218>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>, + <&ipmmu_ds1 2>, <&ipmmu_ds1 3>, + <&ipmmu_ds1 4>, <&ipmmu_ds1 5>, + <&ipmmu_ds1 6>, <&ipmmu_ds1 7>, + <&ipmmu_ds1 8>, <&ipmmu_ds1 9>, + <&ipmmu_ds1 10>, <&ipmmu_ds1 11>, + <&ipmmu_ds1 12>, <&ipmmu_ds1 13>, + <&ipmmu_ds1 14>, <&ipmmu_ds1 15>; }; dmac2: dma-controller@e7310000 { @@ -754,6 +990,14 @@ resets = <&cpg 217>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>, + <&ipmmu_ds1 18>, <&ipmmu_ds1 19>, + <&ipmmu_ds1 20>, <&ipmmu_ds1 21>, + <&ipmmu_ds1 22>, <&ipmmu_ds1 23>, + <&ipmmu_ds1 24>, <&ipmmu_ds1 25>, + <&ipmmu_ds1 26>, <&ipmmu_ds1 27>, + <&ipmmu_ds1 28>, <&ipmmu_ds1 29>, + <&ipmmu_ds1 30>, <&ipmmu_ds1 31>; }; ipmmu_ds0: mmu@e6740000 { @@ -869,6 +1113,7 @@ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 812>; phy-mode = "rgmii"; + iommus = <&ipmmu_ds0 16>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -883,6 +1128,8 @@ <&cpg CPG_CORE R8A774A1_CLK_CANFD>, <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A774A1_CLK_CANFD>; + assigned-clock-rates = <40000000>; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 916>; status = "disabled"; @@ -897,11 +1144,38 @@ <&cpg CPG_CORE R8A774A1_CLK_CANFD>, <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A774A1_CLK_CANFD>; + assigned-clock-rates = <40000000>; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 915>; status = "disabled"; }; + canfd: can@e66c0000 { + compatible = "renesas,r8a774a1-canfd", + "renesas,rcar-gen3-canfd"; + reg = <0 0xe66c0000 0 0x8000>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 914>, + <&cpg CPG_CORE R8A774A1_CLK_CANFD>, + <&can_clk>; + clock-names = "fck", "canfd", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A774A1_CLK_CANFD>; + assigned-clock-rates = <40000000>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 914>; + status = "disabled"; + + channel0 { + status = "disabled"; + }; + + channel1 { + status = "disabled"; + }; + }; + pwm0: pwm@e6e30000 { compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar"; reg = <0 0xe6e30000 0 0x8>; @@ -1408,7 +1682,7 @@ <0 0xec5a0000 0 0x100>, /* ADG */ <0 0xec540000 0 0x1000>, /* SSIU */ <0 0xec541000 0 0x280>, /* SSI */ - <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ + <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; clocks = <&cpg CPG_MOD 1005>, @@ -1452,6 +1726,28 @@ "ssi.1", "ssi.0"; status = "disabled"; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + }; + port@1 { + reg = <1>; + }; + }; + + rcar_sound,ctu { + ctu00: ctu-0 { }; + ctu01: ctu-1 { }; + ctu02: ctu-2 { }; + ctu03: ctu-3 { }; + ctu10: ctu-4 { }; + ctu11: ctu-5 { }; + ctu12: ctu-6 { }; + ctu13: ctu-7 { }; + }; + rcar_sound,dvc { dvc0: dvc-0 { dmas = <&audma1 0xbc>; @@ -1468,17 +1764,6 @@ mix1: mix-1 { }; }; - rcar_sound,ctu { - ctu00: ctu-0 { }; - ctu01: ctu-1 { }; - ctu02: ctu-2 { }; - ctu03: ctu-3 { }; - ctu10: ctu-4 { }; - ctu11: ctu-5 { }; - ctu12: ctu-6 { }; - ctu13: ctu-7 { }; - }; - rcar_sound,src { src0: src-0 { interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; @@ -1535,64 +1820,264 @@ rcar_sound,ssi { ssi0: ssi-0 { interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x01>, <&audma1 0x02>; + dma-names = "rx", "tx"; }; ssi1: ssi-1 { interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x03>, <&audma1 0x04>; + dma-names = "rx", "tx"; }; ssi2: ssi-2 { interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x05>, <&audma1 0x06>; + dma-names = "rx", "tx"; }; ssi3: ssi-3 { interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x07>, <&audma1 0x08>; + dma-names = "rx", "tx"; }; ssi4: ssi-4 { interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x09>, <&audma1 0x0a>; + dma-names = "rx", "tx"; }; ssi5: ssi-5 { interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x0b>, <&audma1 0x0c>; + dma-names = "rx", "tx"; }; ssi6: ssi-6 { interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x0d>, <&audma1 0x0e>; + dma-names = "rx", "tx"; }; ssi7: ssi-7 { interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x0f>, <&audma1 0x10>; + dma-names = "rx", "tx"; }; ssi8: ssi-8 { interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x11>, <&audma1 0x12>; + dma-names = "rx", "tx"; }; ssi9: ssi-9 { interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x13>, <&audma1 0x14>; + dma-names = "rx", "tx"; }; }; - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; + rcar_sound,ssiu { + ssiu00: ssiu-0 { + dmas = <&audma0 0x15>, <&audma1 0x16>; + dma-names = "rx", "tx"; }; - port@1 { - reg = <1>; + ssiu01: ssiu-1 { + dmas = <&audma0 0x35>, <&audma1 0x36>; + dma-names = "rx", "tx"; + }; + ssiu02: ssiu-2 { + dmas = <&audma0 0x37>, <&audma1 0x38>; + dma-names = "rx", "tx"; + }; + ssiu03: ssiu-3 { + dmas = <&audma0 0x47>, <&audma1 0x48>; + dma-names = "rx", "tx"; + }; + ssiu04: ssiu-4 { + dmas = <&audma0 0x3F>, <&audma1 0x40>; + dma-names = "rx", "tx"; + }; + ssiu05: ssiu-5 { + dmas = <&audma0 0x43>, <&audma1 0x44>; + dma-names = "rx", "tx"; + }; + ssiu06: ssiu-6 { + dmas = <&audma0 0x4F>, <&audma1 0x50>; + dma-names = "rx", "tx"; + }; + ssiu07: ssiu-7 { + dmas = <&audma0 0x53>, <&audma1 0x54>; + dma-names = "rx", "tx"; + }; + ssiu10: ssiu-8 { + dmas = <&audma0 0x49>, <&audma1 0x4a>; + dma-names = "rx", "tx"; + }; + ssiu11: ssiu-9 { + dmas = <&audma0 0x4B>, <&audma1 0x4C>; + dma-names = "rx", "tx"; + }; + ssiu12: ssiu-10 { + dmas = <&audma0 0x57>, <&audma1 0x58>; + dma-names = "rx", "tx"; + }; + ssiu13: ssiu-11 { + dmas = <&audma0 0x59>, <&audma1 0x5A>; + dma-names = "rx", "tx"; + }; + ssiu14: ssiu-12 { + dmas = <&audma0 0x5F>, <&audma1 0x60>; + dma-names = "rx", "tx"; + }; + ssiu15: ssiu-13 { + dmas = <&audma0 0xC3>, <&audma1 0xC4>; + dma-names = "rx", "tx"; + }; + ssiu16: ssiu-14 { + dmas = <&audma0 0xC7>, <&audma1 0xC8>; + dma-names = "rx", "tx"; + }; + ssiu17: ssiu-15 { + dmas = <&audma0 0xCB>, <&audma1 0xCC>; + dma-names = "rx", "tx"; + }; + ssiu20: ssiu-16 { + dmas = <&audma0 0x63>, <&audma1 0x64>; + dma-names = "rx", "tx"; + }; + ssiu21: ssiu-17 { + dmas = <&audma0 0x67>, <&audma1 0x68>; + dma-names = "rx", "tx"; + }; + ssiu22: ssiu-18 { + dmas = <&audma0 0x6B>, <&audma1 0x6C>; + dma-names = "rx", "tx"; + }; + ssiu23: ssiu-19 { + dmas = <&audma0 0x6D>, <&audma1 0x6E>; + dma-names = "rx", "tx"; + }; + ssiu24: ssiu-20 { + dmas = <&audma0 0xCF>, <&audma1 0xCE>; + dma-names = "rx", "tx"; + }; + ssiu25: ssiu-21 { + dmas = <&audma0 0xEB>, <&audma1 0xEC>; + dma-names = "rx", "tx"; + }; + ssiu26: ssiu-22 { + dmas = <&audma0 0xED>, <&audma1 0xEE>; + dma-names = "rx", "tx"; + }; + ssiu27: ssiu-23 { + dmas = <&audma0 0xEF>, <&audma1 0xF0>; + dma-names = "rx", "tx"; + }; + ssiu30: ssiu-24 { + dmas = <&audma0 0x6f>, <&audma1 0x70>; + dma-names = "rx", "tx"; + }; + ssiu31: ssiu-25 { + dmas = <&audma0 0x21>, <&audma1 0x22>; + dma-names = "rx", "tx"; + }; + ssiu32: ssiu-26 { + dmas = <&audma0 0x23>, <&audma1 0x24>; + dma-names = "rx", "tx"; + }; + ssiu33: ssiu-27 { + dmas = <&audma0 0x25>, <&audma1 0x26>; + dma-names = "rx", "tx"; + }; + ssiu34: ssiu-28 { + dmas = <&audma0 0x27>, <&audma1 0x28>; + dma-names = "rx", "tx"; + }; + ssiu35: ssiu-29 { + dmas = <&audma0 0x29>, <&audma1 0x2A>; + dma-names = "rx", "tx"; + }; + ssiu36: ssiu-30 { + dmas = <&audma0 0x2B>, <&audma1 0x2C>; + dma-names = "rx", "tx"; + }; + ssiu37: ssiu-31 { + dmas = <&audma0 0x2D>, <&audma1 0x2E>; + dma-names = "rx", "tx"; + }; + ssiu40: ssiu-32 { + dmas = <&audma0 0x71>, <&audma1 0x72>; + dma-names = "rx", "tx"; + }; + ssiu41: ssiu-33 { + dmas = <&audma0 0x17>, <&audma1 0x18>; + dma-names = "rx", "tx"; + }; + ssiu42: ssiu-34 { + dmas = <&audma0 0x19>, <&audma1 0x1A>; + dma-names = "rx", "tx"; + }; + ssiu43: ssiu-35 { + dmas = <&audma0 0x1B>, <&audma1 0x1C>; + dma-names = "rx", "tx"; + }; + ssiu44: ssiu-36 { + dmas = <&audma0 0x1D>, <&audma1 0x1E>; + dma-names = "rx", "tx"; + }; + ssiu45: ssiu-37 { + dmas = <&audma0 0x1F>, <&audma1 0x20>; + dma-names = "rx", "tx"; + }; + ssiu46: ssiu-38 { + dmas = <&audma0 0x31>, <&audma1 0x32>; + dma-names = "rx", "tx"; + }; + ssiu47: ssiu-39 { + dmas = <&audma0 0x33>, <&audma1 0x34>; + dma-names = "rx", "tx"; + }; + ssiu50: ssiu-40 { + dmas = <&audma0 0x73>, <&audma1 0x74>; + dma-names = "rx", "tx"; + }; + ssiu60: ssiu-41 { + dmas = <&audma0 0x75>, <&audma1 0x76>; + dma-names = "rx", "tx"; + }; + ssiu70: ssiu-42 { + dmas = <&audma0 0x79>, <&audma1 0x7a>; + dma-names = "rx", "tx"; + }; + ssiu80: ssiu-43 { + dmas = <&audma0 0x7b>, <&audma1 0x7c>; + dma-names = "rx", "tx"; + }; + ssiu90: ssiu-44 { + dmas = <&audma0 0x7d>, <&audma1 0x7e>; + dma-names = "rx", "tx"; + }; + ssiu91: ssiu-45 { + dmas = <&audma0 0x7F>, <&audma1 0x80>; + dma-names = "rx", "tx"; + }; + ssiu92: ssiu-46 { + dmas = <&audma0 0x81>, <&audma1 0x82>; + dma-names = "rx", "tx"; + }; + ssiu93: ssiu-47 { + dmas = <&audma0 0x83>, <&audma1 0x84>; + dma-names = "rx", "tx"; + }; + ssiu94: ssiu-48 { + dmas = <&audma0 0xA3>, <&audma1 0xA4>; + dma-names = "rx", "tx"; + }; + ssiu95: ssiu-49 { + dmas = <&audma0 0xA5>, <&audma1 0xA6>; + dma-names = "rx", "tx"; + }; + ssiu96: ssiu-50 { + dmas = <&audma0 0xA7>, <&audma1 0xA8>; + dma-names = "rx", "tx"; + }; + ssiu97: ssiu-51 { + dmas = <&audma0 0xA9>, <&audma1 0xAA>; + dma-names = "rx", "tx"; }; }; }; @@ -1629,6 +2114,14 @@ resets = <&cpg 502>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_mp 0>, <&ipmmu_mp 1>, + <&ipmmu_mp 2>, <&ipmmu_mp 3>, + <&ipmmu_mp 4>, <&ipmmu_mp 5>, + <&ipmmu_mp 6>, <&ipmmu_mp 7>, + <&ipmmu_mp 8>, <&ipmmu_mp 9>, + <&ipmmu_mp 10>, <&ipmmu_mp 11>, + <&ipmmu_mp 12>, <&ipmmu_mp 13>, + <&ipmmu_mp 14>, <&ipmmu_mp 15>; }; audma1: dma-controller@ec720000 { @@ -1663,6 +2156,14 @@ resets = <&cpg 501>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_mp 16>, <&ipmmu_mp 17>, + <&ipmmu_mp 18>, <&ipmmu_mp 19>, + <&ipmmu_mp 20>, <&ipmmu_mp 21>, + <&ipmmu_mp 22>, <&ipmmu_mp 23>, + <&ipmmu_mp 24>, <&ipmmu_mp 25>, + <&ipmmu_mp 26>, <&ipmmu_mp 27>, + <&ipmmu_mp 28>, <&ipmmu_mp 29>, + <&ipmmu_mp 30>, <&ipmmu_mp 31>; }; xhci0: usb@ee000000 { @@ -1691,11 +2192,11 @@ compatible = "generic-ohci"; reg = <0 0xee080000 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; - phys = <&usb2_phy0>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; + phys = <&usb2_phy0 1>; phy-names = "usb"; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; - resets = <&cpg 703>; + resets = <&cpg 703>, <&cpg 704>; status = "disabled"; }; @@ -1704,7 +2205,7 @@ reg = <0 0xee0a0000 0 0x100>; interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 702>; - phys = <&usb2_phy1>; + phys = <&usb2_phy1 1>; phy-names = "usb"; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 702>; @@ -1715,12 +2216,12 @@ compatible = "generic-ehci"; reg = <0 0xee080100 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; - phys = <&usb2_phy0>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; + phys = <&usb2_phy0 2>; phy-names = "usb"; companion = <&ohci0>; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; - resets = <&cpg 703>; + resets = <&cpg 703>, <&cpg 704>; status = "disabled"; }; @@ -1729,7 +2230,7 @@ reg = <0 0xee0a0100 0 0x100>; interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 702>; - phys = <&usb2_phy1>; + phys = <&usb2_phy1 2>; phy-names = "usb"; companion = <&ohci1>; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; @@ -1742,10 +2243,10 @@ "renesas,rcar-gen3-usb2-phy"; reg = <0 0xee080200 0 0x700>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; - resets = <&cpg 703>; - #phy-cells = <0>; + resets = <&cpg 703>, <&cpg 704>; + #phy-cells = <1>; status = "disabled"; }; @@ -1756,7 +2257,7 @@ clocks = <&cpg CPG_MOD 702>; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 702>; - #phy-cells = <0>; + #phy-cells = <1>; status = "disabled"; }; @@ -1825,6 +2326,70 @@ resets = <&cpg 408>; }; + pciec0: pcie@fe000000 { + compatible = "renesas,pcie-r8a774a1", + "renesas,pcie-rcar-gen3"; + reg = <0 0xfe000000 0 0x80000>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + device_type = "pci"; + ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000 + 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000 + 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000 + 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; + /* Map all possible DDR as inbound ranges */ + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>; + clock-names = "pcie", "pcie_bus"; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 319>; + status = "disabled"; + }; + + pciec1: pcie@ee800000 { + compatible = "renesas,pcie-r8a774a1", + "renesas,pcie-rcar-gen3"; + reg = <0 0xee800000 0 0x80000>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + device_type = "pci"; + ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000 + 0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000 + 0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000 + 0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>; + /* Map all possible DDR as inbound ranges */ + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 318>, <&pcie_bus_clk>; + clock-names = "pcie", "pcie_bus"; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 318>; + status = "disabled"; + }; + + fdp1@fe940000 { + compatible = "renesas,fdp1"; + reg = <0 0xfe940000 0 0x2400>; + interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 119>; + power-domains = <&sysc R8A774A1_PD_A3VC>; + resets = <&cpg 119>; + renesas,fcp = <&fcpf0>; + }; + fcpf0: fcp@fe950000 { compatible = "renesas,fcpf"; reg = <0 0xfe950000 0 0x200>; @@ -1877,6 +2442,61 @@ iommus = <&ipmmu_vc0 19>; }; + vspb: vsp@fe960000 { + compatible = "renesas,vsp2"; + reg = <0 0xfe960000 0 0x8000>; + interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 626>; + power-domains = <&sysc R8A774A1_PD_A3VC>; + resets = <&cpg 626>; + + renesas,fcp = <&fcpvb0>; + }; + + vspd0: vsp@fea20000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea20000 0 0x5000>; + interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 623>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 623>; + + renesas,fcp = <&fcpvd0>; + }; + + vspd1: vsp@fea28000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea28000 0 0x5000>; + interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 622>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 622>; + + renesas,fcp = <&fcpvd1>; + }; + + vspd2: vsp@fea30000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea30000 0 0x5000>; + interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 621>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 621>; + + renesas,fcp = <&fcpvd2>; + }; + + vspi0: vsp@fe9a0000 { + compatible = "renesas,vsp2"; + reg = <0 0xfe9a0000 0 0x8000>; + interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 631>; + power-domains = <&sysc R8A774A1_PD_A3VC>; + resets = <&cpg 631>; + + renesas,fcp = <&fcpvi0>; + }; + csi20: csi2@fea80000 { compatible = "renesas,r8a774a1-csi2"; reg = <0 0xfea80000 0 0x10000>; @@ -1988,6 +2608,101 @@ }; }; + hdmi0: hdmi@fead0000 { + compatible = "renesas,r8a774a1-hdmi", + "renesas,rcar-gen3-hdmi"; + reg = <0 0xfead0000 0 0x10000>; + interrupts = <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 729>, + <&cpg CPG_CORE R8A774A1_CLK_HDMI>; + clock-names = "iahb", "isfr"; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 729>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + dw_hdmi0_in: endpoint { + remote-endpoint = <&du_out_hdmi0>; + }; + }; + port@1 { + reg = <1>; + }; + port@2 { + /* HDMI sound */ + reg = <2>; + }; + }; + }; + + du: display@feb00000 { + compatible = "renesas,du-r8a774a1"; + reg = <0 0xfeb00000 0 0x70000>; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 722>; + clock-names = "du.0", "du.1", "du.2"; + status = "disabled"; + + vsps = <&vspd0 &vspd1 &vspd2>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + du_out_rgb: endpoint { + }; + }; + port@1 { + reg = <1>; + du_out_hdmi0: endpoint { + remote-endpoint = <&dw_hdmi0_in>; + }; + }; + port@2 { + reg = <2>; + du_out_lvds0: endpoint { + remote-endpoint = <&lvds0_in>; + }; + }; + }; + }; + + lvds0: lvds@feb90000 { + compatible = "renesas,r8a774a1-lvds"; + reg = <0 0xfeb90000 0 0x14>; + clocks = <&cpg CPG_MOD 727>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 727>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds0_in: endpoint { + remote-endpoint = <&du_out_lvds0>; + }; + }; + port@1 { + reg = <1>; + lvds0_out: endpoint { + }; + }; + }; + }; + prr: chipid@fff00044 { compatible = "renesas,prr"; reg = <0 0xfff00044 0 4>; @@ -1999,6 +2714,7 @@ polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsc 0>; + sustainable-power = <3874>; trips { sensor1_crit: sensor1-crit { @@ -2013,6 +2729,7 @@ polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsc 1>; + sustainable-power = <3874>; trips { sensor2_crit: sensor2-crit { @@ -2021,15 +2738,33 @@ type = "critical"; }; }; - }; sensor_thermal3: sensor-thermal3 { polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsc 2>; + sustainable-power = <3874>; + cooling-maps { + map0 { + trip = <&target>; + cooling-device = <&a57_0 0 2>; + contribution = <1024>; + }; + map1 { + trip = <&target>; + cooling-device = <&a53_0 0 2>; + contribution = <1024>; + }; + }; trips { + target: trip-point1 { + temperature = <100000>; + hysteresis = <1000>; + type = "passive"; + }; + sensor3_crit: sensor3-crit { temperature = <120000>; hysteresis = <1000>; diff --git a/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts b/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts index 013a48c01211..c99b1dec52ef 100644 --- a/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts +++ b/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts @@ -8,6 +8,7 @@ /dts-v1/; #include "r8a774c0.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/display/tda998x.h> / { model = "Silicon Linux RZ/G2E 96board platform (CAT874)"; @@ -15,13 +16,25 @@ aliases { serial0 = &scif2; + serial1 = &hscif2; }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:115200n8"; }; + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_out: endpoint { + remote-endpoint = <&tda19988_out>; + }; + }; + }; + leds { compatible = "gpio-leds"; @@ -52,6 +65,32 @@ reg = <0x0 0x48000000 0x0 0x78000000>; }; + reg_12p0v: regulator-12p0v { + compatible = "regulator-fixed"; + regulator-name = "D12.0V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-boot-on; + regulator-always-on; + }; + + sound: sound { + compatible = "simple-audio-card"; + + simple-audio-card,name = "CAT874 HDMI sound"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sndcpu>; + simple-audio-card,frame-master = <&sndcpu>; + + sndcodec: simple-audio-card,codec { + sound-dai = <&tda19988>; + }; + + sndcpu: simple-audio-card,cpu { + sound-dai = <&rcar_sound>; + }; + }; + vcc_sdhi0: regulator-vcc-sdhi0 { compatible = "regulator-fixed"; @@ -74,6 +113,46 @@ states = <3300000 1 1800000 0>; }; + + wlan_en_reg: fixedregulator { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + startup-delay-us = <70000>; + + gpio = <&gpio2 25 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + x13_clk: x13 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <74250000>; + }; +}; + +&audio_clk_a { + clock-frequency = <22579200>; +}; + +&du { + pinctrl-0 = <&du_pins>; + pinctrl-names = "default"; + status = "okay"; + + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&x13_clk>; + clock-names = "du.0", "du.1", "dclkin.0"; + + ports { + port@0 { + endpoint { + remote-endpoint = <&tda19988_in>; + }; + }; + }; }; &ehci0 { @@ -85,6 +164,81 @@ clock-frequency = <48000000>; }; +&hscif2 { + pinctrl-0 = <&hscif2_pins>; + pinctrl-names = "default"; + + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "ti,wl1837-st"; + enable-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; + }; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <100000>; + + hd3ss3220@47 { + compatible = "ti,hd3ss3220"; + reg = <0x47>; + interrupt-parent = <&gpio6>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + hd3ss3220_ep: endpoint { + remote-endpoint = <&usb3_role_switch>; + }; + }; + }; + }; + }; + + tda19988: tda19988@70 { + compatible = "nxp,tda998x"; + reg = <0x70>; + interrupt-parent = <&gpio1>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + + video-ports = <0x234501>; + + #sound-dai-cells = <0>; + audio-ports = <TDA998x_I2S 0x03>; + clocks = <&rcar_sound 1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + tda19988_in: endpoint { + remote-endpoint = <&du_out_rgb>; + }; + }; + + port@1 { + reg = <1>; + tda19988_out: endpoint { + remote-endpoint = <&hdmi_con_out>; + }; + }; + }; + }; +}; + &i2c1 { pinctrl-0 = <&i2c1_pins>; pinctrl-names = "default"; @@ -98,6 +252,13 @@ }; }; +&lvds0 { + status = "okay"; + + clocks = <&cpg CPG_MOD 727>, <&x13_clk>, <&extal_clk>; + clock-names = "fck", "dclkin.0", "extal"; +}; + &ohci0 { dr_mode = "host"; status = "okay"; @@ -113,6 +274,17 @@ }; &pfc { + du_pins: du { + groups = "du_rgb888", "du_clk_out_0", "du_sync", "du_disp", + "du_clk_in_0"; + function = "du"; + }; + + hscif2_pins: hscif2 { + groups = "hscif2_data_a", "hscif2_ctrl_a"; + function = "hscif2"; + }; + i2c1_pins: i2c1 { groups = "i2c1_b"; function = "i2c1"; @@ -134,6 +306,47 @@ function = "sdhi0"; power-source = <1800>; }; + + sdhi3_pins: sd3 { + groups = "sdhi3_data4", "sdhi3_ctrl"; + function = "sdhi3"; + power-source = <1800>; + }; + + sound_clk_pins: sound_clk { + groups = "audio_clkout1_a"; + function = "audio_clk"; + }; + + sound_pins: sound { + groups = "ssi01239_ctrl", "ssi0_data"; + function = "ssi"; + }; + + usb30_pins: usb30 { + groups = "usb30", "usb30_id"; + function = "usb30"; + }; +}; + +&rcar_sound { + pinctrl-0 = <&sound_pins &sound_clk_pins>; + pinctrl-names = "default"; + + /* Single DAI */ + #sound-dai-cells = <0>; + + /* audio_clkout0/1/2/3 */ + #clock-cells = <1>; + clock-frequency = <11289600>; + + status = "okay"; + + rcar_sound,dai { + dai0 { + playback = <&ssi0 &src0 &dvc0>; + }; + }; }; &rwdt { @@ -162,7 +375,47 @@ status = "okay"; }; +&sdhi3 { + status = "okay"; + pinctrl-0 = <&sdhi3_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&wlan_en_reg>; + bus-width = <4>; + non-removable; + cap-power-off-card; + keep-power-in-suspend; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1837"; + reg = <2>; + interrupt-parent = <&gpio1>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + &usb2_phy0 { renesas,no-otg-pins; status = "okay"; }; + +&usb3_peri0 { + companion = <&xhci0>; + status = "okay"; + usb-role-switch; + + port { + usb3_role_switch: endpoint { + remote-endpoint = <&hd3ss3220_ep>; + }; + }; +}; + +&xhci0 { + pinctrl-0 = <&usb30_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi index 3f86db199dbf..a1c2de90e470 100644 --- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi @@ -70,7 +70,7 @@ #size-cells = <0>; a53_0: cpu@0 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0>; device_type = "cpu"; power-domains = <&sysc R8A774C0_PD_CA53_CPU0>; @@ -81,7 +81,7 @@ }; a53_1: cpu@1 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <1>; device_type = "cpu"; power-domains = <&sysc R8A774C0_PD_CA53_CPU1>; @@ -684,7 +684,7 @@ <&usb_dmac1 0>, <&usb_dmac1 1>; dma-names = "ch0", "ch1", "ch2", "ch3"; renesas,buswait = <11>; - phys = <&usb2_phy0>; + phys = <&usb2_phy0 3>; phy-names = "usb"; power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; resets = <&cpg 704>, <&cpg 703>; @@ -973,6 +973,8 @@ <&cpg CPG_CORE R8A774C0_CLK_CANFD>, <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A774C0_CLK_CANFD>; + assigned-clock-rates = <40000000>; power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; resets = <&cpg 916>; status = "disabled"; @@ -987,6 +989,8 @@ <&cpg CPG_CORE R8A774C0_CLK_CANFD>, <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A774C0_CLK_CANFD>; + assigned-clock-rates = <40000000>; power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; resets = <&cpg 915>; status = "disabled"; @@ -1367,6 +1371,17 @@ "ssi.1", "ssi.0"; status = "disabled"; + rcar_sound,ctu { + ctu00: ctu-0 { }; + ctu01: ctu-1 { }; + ctu02: ctu-2 { }; + ctu03: ctu-3 { }; + ctu10: ctu-4 { }; + ctu11: ctu-5 { }; + ctu12: ctu-6 { }; + ctu13: ctu-7 { }; + }; + rcar_sound,dvc { dvc0: dvc-0 { dmas = <&audma0 0xbc>; @@ -1383,17 +1398,6 @@ mix1: mix-1 { }; }; - rcar_sound,ctu { - ctu00: ctu-0 { }; - ctu01: ctu-1 { }; - ctu02: ctu-2 { }; - ctu03: ctu-3 { }; - ctu10: ctu-4 { }; - ctu11: ctu-5 { }; - ctu12: ctu-6 { }; - ctu13: ctu-7 { }; - }; - rcar_sound,src { src0: src-0 { interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; @@ -1580,7 +1584,7 @@ reg = <0 0xee080000 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; - phys = <&usb2_phy0>; + phys = <&usb2_phy0 1>; phy-names = "usb"; power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; resets = <&cpg 703>, <&cpg 704>; @@ -1592,7 +1596,7 @@ reg = <0 0xee080100 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; - phys = <&usb2_phy0>; + phys = <&usb2_phy0 2>; phy-names = "usb"; companion = <&ohci0>; power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; @@ -1608,7 +1612,7 @@ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; resets = <&cpg 703>, <&cpg 704>; - #phy-cells = <0>; + #phy-cells = <1>; status = "disabled"; }; @@ -1702,13 +1706,24 @@ renesas,fcp = <&fcpvb0>; }; - fcpvb0: fcp@fe96f000 { - compatible = "renesas,fcpv"; - reg = <0 0xfe96f000 0 0x200>; - clocks = <&cpg CPG_MOD 607>; + vspd0: vsp@fea20000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea20000 0 0x7000>; + interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 623>; power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; - resets = <&cpg 607>; - iommus = <&ipmmu_vp0 5>; + resets = <&cpg 623>; + renesas,fcp = <&fcpvd0>; + }; + + vspd1: vsp@fea28000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea28000 0 0x7000>; + interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 622>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 622>; + renesas,fcp = <&fcpvd1>; }; vspi0: vsp@fe9a0000 { @@ -1721,23 +1736,13 @@ renesas,fcp = <&fcpvi0>; }; - fcpvi0: fcp@fe9af000 { + fcpvb0: fcp@fe96f000 { compatible = "renesas,fcpv"; - reg = <0 0xfe9af000 0 0x200>; - clocks = <&cpg CPG_MOD 611>; - power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; - resets = <&cpg 611>; - iommus = <&ipmmu_vp0 8>; - }; - - vspd0: vsp@fea20000 { - compatible = "renesas,vsp2"; - reg = <0 0xfea20000 0 0x7000>; - interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 623>; + reg = <0 0xfe96f000 0 0x200>; + clocks = <&cpg CPG_MOD 607>; power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; - resets = <&cpg 623>; - renesas,fcp = <&fcpvd0>; + resets = <&cpg 607>; + iommus = <&ipmmu_vp0 5>; }; fcpvd0: fcp@fea27000 { @@ -1749,16 +1754,6 @@ iommus = <&ipmmu_vi0 8>; }; - vspd1: vsp@fea28000 { - compatible = "renesas,vsp2"; - reg = <0 0xfea28000 0 0x7000>; - interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 622>; - power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; - resets = <&cpg 622>; - renesas,fcp = <&fcpvd1>; - }; - fcpvd1: fcp@fea2f000 { compatible = "renesas,fcpv"; reg = <0 0xfea2f000 0 0x200>; @@ -1768,6 +1763,15 @@ iommus = <&ipmmu_vi0 9>; }; + fcpvi0: fcp@fe9af000 { + compatible = "renesas,fcpv"; + reg = <0 0xfe9af000 0 0x200>; + clocks = <&cpg CPG_MOD 611>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 611>; + iommus = <&ipmmu_vp0 8>; + }; + csi40: csi2@feaa0000 { compatible = "renesas,r8a774c0-csi2"; reg = <0 0xfeaa0000 0 0x10000>; @@ -1801,13 +1805,13 @@ du: display@feb00000 { compatible = "renesas,du-r8a774c0"; - reg = <0 0xfeb00000 0 0x80000>; + reg = <0 0xfeb00000 0 0x40000>; interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>; clock-names = "du.0", "du.1"; - vsps = <&vspd0 0 &vspd1 0>; + vsps = <&vspd0 0>, <&vspd1 0>; status = "disabled"; ports { @@ -1844,6 +1848,8 @@ resets = <&cpg 727>; status = "disabled"; + renesas,companion = <&lvds1>; + ports { #address-cells = <1>; #size-cells = <0>; @@ -1902,6 +1908,9 @@ polling-delay = <1000>; thermal-sensors = <&thermal>; + cooling-maps { + }; + trips { cpu-crit { temperature = <120000>; @@ -1909,9 +1918,6 @@ type = "critical"; }; }; - - cooling-maps { - }; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts index c1a56eab7b24..c72968623e94 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts @@ -52,12 +52,6 @@ status = "okay"; }; -&sound_card { - dais = <&rsnd_port0 /* ak4613 */ - &rsnd_port1 /* HDMI0 */ - &rsnd_port2>; /* HDMI1 */ -}; - &hdmi0 { status = "okay"; @@ -108,6 +102,13 @@ status = "okay"; }; +&pfc { + usb2_pins: usb2 { + groups = "usb2"; + function = "usb2"; + }; +}; + &rcar_sound { ports { /* rsnd_port0 is on salvator-common */ @@ -138,17 +139,16 @@ }; }; -&pfc { - usb2_pins: usb2 { - groups = "usb2"; - function = "usb2"; - }; -}; - &sata { status = "okay"; }; +&sound_card { + dais = <&rsnd_port0 /* ak4613 */ + &rsnd_port1 /* HDMI0 */ + &rsnd_port2>; /* HDMI1 */ +}; + &usb2_phy2 { pinctrl-0 = <&usb2_pins>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi b/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi index 40d10daca852..e4650ae5b75a 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi @@ -7,22 +7,75 @@ #include "r8a7795.dtsi" -&soc { - xhci1: usb@ee040000 { - compatible = "renesas,xhci-r8a7795", "renesas,rcar-gen3-xhci"; - reg = <0 0xee040000 0 0xc00>; - interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 327>; - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - resets = <&cpg 327>; - status = "disabled"; - }; +&audma0 { + iommus = <&ipmmu_mp1 0>, <&ipmmu_mp1 1>, + <&ipmmu_mp1 2>, <&ipmmu_mp1 3>, + <&ipmmu_mp1 4>, <&ipmmu_mp1 5>, + <&ipmmu_mp1 6>, <&ipmmu_mp1 7>, + <&ipmmu_mp1 8>, <&ipmmu_mp1 9>, + <&ipmmu_mp1 10>, <&ipmmu_mp1 11>, + <&ipmmu_mp1 12>, <&ipmmu_mp1 13>, + <&ipmmu_mp1 14>, <&ipmmu_mp1 15>; +}; - /delete-node/ mmu@febe0000; - /delete-node/ mmu@fe980000; - /delete-node/ mmu@fd950000; - /delete-node/ mmu@fd960000; - /delete-node/ mmu@fd970000; +&audma1 { + iommus = <&ipmmu_mp1 16>, <&ipmmu_mp1 17>, + <&ipmmu_mp1 18>, <&ipmmu_mp1 19>, + <&ipmmu_mp1 20>, <&ipmmu_mp1 21>, + <&ipmmu_mp1 22>, <&ipmmu_mp1 23>, + <&ipmmu_mp1 24>, <&ipmmu_mp1 25>, + <&ipmmu_mp1 26>, <&ipmmu_mp1 27>, + <&ipmmu_mp1 28>, <&ipmmu_mp1 29>, + <&ipmmu_mp1 30>, <&ipmmu_mp1 31>; +}; + +&du { + vsps = <&vspd0 &vspd1 &vspd2 &vspd3>; +}; + +&fcpvb1 { + iommus = <&ipmmu_vp0 7>; +}; + +&fcpf1 { + iommus = <&ipmmu_vp0 1>; +}; + +&fcpvi1 { + iommus = <&ipmmu_vp0 9>; +}; + +&fcpvd2 { + iommus = <&ipmmu_vi0 10>; +}; + +&gpio1 { + gpio-ranges = <&pfc 0 32 28>; +}; + +&ipmmu_vi0 { + renesas,ipmmu-main = <&ipmmu_mm 11>; +}; + +&ipmmu_vp0 { + renesas,ipmmu-main = <&ipmmu_mm 12>; +}; + +&ipmmu_vc0 { + renesas,ipmmu-main = <&ipmmu_mm 9>; +}; + +&ipmmu_vc1 { + renesas,ipmmu-main = <&ipmmu_mm 10>; +}; + +&ipmmu_rt { + renesas,ipmmu-main = <&ipmmu_mm 7>; +}; + +&soc { + /delete-node/ dma-controller@e6460000; + /delete-node/ dma-controller@e6470000; ipmmu_mp1: mmu@ec680000 { compatible = "renesas,ipmmu-r8a7795"; @@ -40,13 +93,37 @@ #iommu-cells = <1>; }; - /delete-node/ usb-phy@ee0e0200; - /delete-node/ usb@ee0e0100; - /delete-node/ usb@ee0e0000; + /delete-node/ mmu@fd950000; + /delete-node/ mmu@fd960000; + /delete-node/ mmu@fd970000; + /delete-node/ mmu@febe0000; + /delete-node/ mmu@fe980000; + + xhci1: usb@ee040000 { + compatible = "renesas,xhci-r8a7795", "renesas,rcar-gen3-xhci"; + reg = <0 0xee040000 0 0xc00>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 327>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 327>; + status = "disabled"; + }; + /delete-node/ usb@e659c000; + /delete-node/ usb@ee0e0000; + /delete-node/ usb@ee0e0100; - /delete-node/ dma-controller@e6460000; - /delete-node/ dma-controller@e6470000; + /delete-node/ usb-phy@ee0e0200; + + fdp1@fe948000 { + compatible = "renesas,fdp1"; + reg = <0 0xfe948000 0 0x2400>; + interrupts = <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 117>; + power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 117>; + renesas,fcp = <&fcpf2>; + }; fcpf2: fcp@fe952000 { compatible = "renesas,fcpf"; @@ -57,15 +134,13 @@ iommus = <&ipmmu_vp0 2>; }; - vspi2: vsp@fe9c0000 { - compatible = "renesas,vsp2"; - reg = <0 0xfe9c0000 0 0x8000>; - interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 629>; - power-domains = <&sysc R8A7795_PD_A3VP>; - resets = <&cpg 629>; - - renesas,fcp = <&fcpvi2>; + fcpvd3: fcp@fea3f000 { + compatible = "renesas,fcpv"; + reg = <0 0xfea3f000 0 0x200>; + clocks = <&cpg CPG_MOD 600>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 600>; + iommus = <&ipmmu_vi0 11>; }; fcpvi2: fcp@fe9cf000 { @@ -88,23 +163,15 @@ renesas,fcp = <&fcpvd3>; }; - fcpvd3: fcp@fea3f000 { - compatible = "renesas,fcpv"; - reg = <0 0xfea3f000 0 0x200>; - clocks = <&cpg CPG_MOD 600>; - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - resets = <&cpg 600>; - iommus = <&ipmmu_vi0 11>; - }; - - fdp1@fe948000 { - compatible = "renesas,fdp1"; - reg = <0 0xfe948000 0 0x2400>; - interrupts = <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 117>; + vspi2: vsp@fe9c0000 { + compatible = "renesas,vsp2"; + reg = <0 0xfe9c0000 0 0x8000>; + interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 629>; power-domains = <&sysc R8A7795_PD_A3VP>; - resets = <&cpg 117>; - renesas,fcp = <&fcpf2>; + resets = <&cpg 629>; + + renesas,fcp = <&fcpvi2>; }; csi21: csi2@fea90000 { @@ -163,72 +230,6 @@ }; }; -&gpio1 { - gpio-ranges = <&pfc 0 32 28>; -}; - -&ipmmu_vi0 { - renesas,ipmmu-main = <&ipmmu_mm 11>; -}; - -&ipmmu_vp0 { - renesas,ipmmu-main = <&ipmmu_mm 12>; -}; - -&ipmmu_vc0 { - renesas,ipmmu-main = <&ipmmu_mm 9>; -}; - -&ipmmu_vc1 { - renesas,ipmmu-main = <&ipmmu_mm 10>; -}; - -&ipmmu_rt { - renesas,ipmmu-main = <&ipmmu_mm 7>; -}; - -&audma0 { - iommus = <&ipmmu_mp1 0>, <&ipmmu_mp1 1>, - <&ipmmu_mp1 2>, <&ipmmu_mp1 3>, - <&ipmmu_mp1 4>, <&ipmmu_mp1 5>, - <&ipmmu_mp1 6>, <&ipmmu_mp1 7>, - <&ipmmu_mp1 8>, <&ipmmu_mp1 9>, - <&ipmmu_mp1 10>, <&ipmmu_mp1 11>, - <&ipmmu_mp1 12>, <&ipmmu_mp1 13>, - <&ipmmu_mp1 14>, <&ipmmu_mp1 15>; -}; - -&audma1 { - iommus = <&ipmmu_mp1 16>, <&ipmmu_mp1 17>, - <&ipmmu_mp1 18>, <&ipmmu_mp1 19>, - <&ipmmu_mp1 20>, <&ipmmu_mp1 21>, - <&ipmmu_mp1 22>, <&ipmmu_mp1 23>, - <&ipmmu_mp1 24>, <&ipmmu_mp1 25>, - <&ipmmu_mp1 26>, <&ipmmu_mp1 27>, - <&ipmmu_mp1 28>, <&ipmmu_mp1 29>, - <&ipmmu_mp1 30>, <&ipmmu_mp1 31>; -}; - -&fcpvb1 { - iommus = <&ipmmu_vp0 7>; -}; - -&fcpf1 { - iommus = <&ipmmu_vp0 1>; -}; - -&fcpvi1 { - iommus = <&ipmmu_vp0 9>; -}; - -&fcpvd2 { - iommus = <&ipmmu_vi0 10>; -}; - -&du { - vsps = <&vspd0 &vspd1 &vspd2 &vspd3>; -}; - &vin0 { ports { port@1 { diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts index d2d48b33b37f..72874f675359 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts @@ -52,12 +52,6 @@ status = "okay"; }; -&sound_card { - dais = <&rsnd_port0 /* ak4613 */ - &rsnd_port1 /* HDMI0 */ - &rsnd_port2>; /* HDMI1 */ -}; - &hdmi0 { status = "okay"; @@ -108,6 +102,13 @@ status = "okay"; }; +&pfc { + usb2_pins: usb2 { + groups = "usb2"; + function = "usb2"; + }; +}; + &rcar_sound { ports { /* rsnd_port0 is on salvator-common */ @@ -138,17 +139,16 @@ }; }; -&pfc { - usb2_pins: usb2 { - groups = "usb2"; - function = "usb2"; - }; -}; - &sata { status = "okay"; }; +&sound_card { + dais = <&rsnd_port0 /* ak4613 */ + &rsnd_port1 /* HDMI0 */ + &rsnd_port2>; /* HDMI1 */ +}; + &usb2_phy2 { pinctrl-0 = <&usb2_pins>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts index 42101fc76837..36667c81d43d 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts @@ -57,17 +57,6 @@ status = "okay"; }; -&hsusb3 { - dr_mode = "otg"; - status = "okay"; -}; - -&sound_card { - dais = <&rsnd_port0 /* ak4613 */ - &rsnd_port1 /* HDMI0 */ - &rsnd_port2>; /* HDMI1 */ -}; - &hdmi0 { status = "okay"; @@ -114,6 +103,11 @@ remote-endpoint = <&rcar_dw_hdmi1_out>; }; +&hsusb3 { + dr_mode = "otg"; + status = "okay"; +}; + &ohci2 { status = "okay"; }; @@ -123,36 +117,6 @@ status = "okay"; }; -&rcar_sound { - ports { - /* rsnd_port0 is on salvator-common */ - rsnd_port1: port@1 { - reg = <1>; - rsnd_endpoint1: endpoint { - remote-endpoint = <&dw_hdmi0_snd_in>; - - dai-format = "i2s"; - bitclock-master = <&rsnd_endpoint1>; - frame-master = <&rsnd_endpoint1>; - - playback = <&ssi2>; - }; - }; - rsnd_port2: port@2 { - reg = <2>; - rsnd_endpoint2: endpoint { - remote-endpoint = <&dw_hdmi1_snd_in>; - - dai-format = "i2s"; - bitclock-master = <&rsnd_endpoint2>; - frame-master = <&rsnd_endpoint2>; - - playback = <&ssi3>; - }; - }; - }; -}; - &pca9654 { pcie_sata_switch { gpio-hog; @@ -186,11 +150,47 @@ }; }; +&rcar_sound { + ports { + /* rsnd_port0 is on salvator-common */ + rsnd_port1: port@1 { + reg = <1>; + rsnd_endpoint1: endpoint { + remote-endpoint = <&dw_hdmi0_snd_in>; + + dai-format = "i2s"; + bitclock-master = <&rsnd_endpoint1>; + frame-master = <&rsnd_endpoint1>; + + playback = <&ssi2>; + }; + }; + rsnd_port2: port@2 { + reg = <2>; + rsnd_endpoint2: endpoint { + remote-endpoint = <&dw_hdmi1_snd_in>; + + dai-format = "i2s"; + bitclock-master = <&rsnd_endpoint2>; + frame-master = <&rsnd_endpoint2>; + + playback = <&ssi3>; + }; + }; + }; +}; + /* SW12-7 must be set 'Off' (MD12 set to 1) which is not the default! */ &sata { status = "okay"; }; +&sound_card { + dais = <&rsnd_port0 /* ak4613 */ + &rsnd_port1 /* HDMI0 */ + &rsnd_port2>; /* HDMI1 */ +}; + &usb2_phy2 { pinctrl-0 = <&usb2_pins>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi index 097538cc4b1f..95deff66eeb6 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi @@ -155,6 +155,7 @@ power-domains = <&sysc R8A7795_PD_CA57_CPU0>; next-level-cache = <&L2_CA57>; enable-method = "psci"; + dynamic-power-coefficient = <854>; clocks = <&cpg CPG_CORE R8A7795_CLK_Z>; operating-points-v2 = <&cluster0_opp>; capacity-dmips-mhz = <1024>; @@ -207,6 +208,8 @@ power-domains = <&sysc R8A7795_PD_CA53_CPU0>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + #cooling-cells = <2>; + dynamic-power-coefficient = <277>; clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; capacity-dmips-mhz = <535>; @@ -812,7 +815,7 @@ <&usb_dmac1 0>, <&usb_dmac1 1>; dma-names = "ch0", "ch1", "ch2", "ch3"; renesas,buswait = <11>; - phys = <&usb2_phy0>; + phys = <&usb2_phy0 3>; phy-names = "usb"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 704>, <&cpg 703>; @@ -829,7 +832,7 @@ <&usb_dmac3 0>, <&usb_dmac3 1>; dma-names = "ch0", "ch1", "ch2", "ch3"; renesas,buswait = <11>; - phys = <&usb2_phy3>; + phys = <&usb2_phy3 3>; phy-names = "usb"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 705>, <&cpg 700>; @@ -1450,6 +1453,17 @@ status = "disabled"; }; + tpu: pwm@e6e80000 { + compatible = "renesas,tpu-r8a7795", "renesas,tpu"; + reg = <0 0xe6e80000 0 0x148>; + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 304>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 304>; + #pwm-cells = <3>; + status = "disabled"; + }; + msiof0: spi@e6e90000 { compatible = "renesas,msiof-r8a7795", "renesas,rcar-gen3-msiof"; @@ -2405,7 +2419,7 @@ reg = <0 0xee080000 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; - phys = <&usb2_phy0>; + phys = <&usb2_phy0 1>; phy-names = "usb"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 703>, <&cpg 704>; @@ -2417,7 +2431,7 @@ reg = <0 0xee0a0000 0 0x100>; interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 702>; - phys = <&usb2_phy1>; + phys = <&usb2_phy1 1>; phy-names = "usb"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 702>; @@ -2429,7 +2443,7 @@ reg = <0 0xee0c0000 0 0x100>; interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 701>; - phys = <&usb2_phy2>; + phys = <&usb2_phy2 1>; phy-names = "usb"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 701>; @@ -2441,7 +2455,7 @@ reg = <0 0xee0e0000 0 0x100>; interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 700>, <&cpg CPG_MOD 705>; - phys = <&usb2_phy3>; + phys = <&usb2_phy3 1>; phy-names = "usb"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 700>, <&cpg 705>; @@ -2453,7 +2467,7 @@ reg = <0 0xee080100 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; - phys = <&usb2_phy0>; + phys = <&usb2_phy0 2>; phy-names = "usb"; companion = <&ohci0>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; @@ -2466,7 +2480,7 @@ reg = <0 0xee0a0100 0 0x100>; interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 702>; - phys = <&usb2_phy1>; + phys = <&usb2_phy1 2>; phy-names = "usb"; companion = <&ohci1>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; @@ -2479,7 +2493,7 @@ reg = <0 0xee0c0100 0 0x100>; interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 701>; - phys = <&usb2_phy2>; + phys = <&usb2_phy2 2>; phy-names = "usb"; companion = <&ohci2>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; @@ -2492,7 +2506,7 @@ reg = <0 0xee0e0100 0 0x100>; interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 700>, <&cpg CPG_MOD 705>; - phys = <&usb2_phy3>; + phys = <&usb2_phy3 2>; phy-names = "usb"; companion = <&ohci3>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; @@ -2508,7 +2522,7 @@ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 703>, <&cpg 704>; - #phy-cells = <0>; + #phy-cells = <1>; status = "disabled"; }; @@ -2519,7 +2533,7 @@ clocks = <&cpg CPG_MOD 702>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 702>; - #phy-cells = <0>; + #phy-cells = <1>; status = "disabled"; }; @@ -2530,7 +2544,7 @@ clocks = <&cpg CPG_MOD 701>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 701>; - #phy-cells = <0>; + #phy-cells = <1>; status = "disabled"; }; @@ -2542,7 +2556,7 @@ clocks = <&cpg CPG_MOD 700>, <&cpg CPG_MOD 705>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 700>, <&cpg 705>; - #phy-cells = <0>; + #phy-cells = <1>; status = "disabled"; }; @@ -2717,6 +2731,83 @@ resets = <&cpg 820>; }; + vspbc: vsp@fe920000 { + compatible = "renesas,vsp2"; + reg = <0 0xfe920000 0 0x8000>; + interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 624>; + power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 624>; + + renesas,fcp = <&fcpvb1>; + }; + + vspbd: vsp@fe960000 { + compatible = "renesas,vsp2"; + reg = <0 0xfe960000 0 0x8000>; + interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 626>; + power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 626>; + + renesas,fcp = <&fcpvb0>; + }; + + vspd0: vsp@fea20000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea20000 0 0x5000>; + interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 623>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 623>; + + renesas,fcp = <&fcpvd0>; + }; + + vspd1: vsp@fea28000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea28000 0 0x5000>; + interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 622>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 622>; + + renesas,fcp = <&fcpvd1>; + }; + + vspd2: vsp@fea30000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea30000 0 0x5000>; + interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 621>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 621>; + + renesas,fcp = <&fcpvd2>; + }; + + vspi0: vsp@fe9a0000 { + compatible = "renesas,vsp2"; + reg = <0 0xfe9a0000 0 0x8000>; + interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 631>; + power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 631>; + + renesas,fcp = <&fcpvi0>; + }; + + vspi1: vsp@fe9b0000 { + compatible = "renesas,vsp2"; + reg = <0 0xfe9b0000 0 0x8000>; + interrupts = <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 630>; + power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 630>; + + renesas,fcp = <&fcpvi1>; + }; + fdp1@fe940000 { compatible = "renesas,fdp1"; reg = <0 0xfe940000 0 0x2400>; @@ -2818,83 +2909,6 @@ iommus = <&ipmmu_vi1 10>; }; - vspbd: vsp@fe960000 { - compatible = "renesas,vsp2"; - reg = <0 0xfe960000 0 0x8000>; - interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 626>; - power-domains = <&sysc R8A7795_PD_A3VP>; - resets = <&cpg 626>; - - renesas,fcp = <&fcpvb0>; - }; - - vspbc: vsp@fe920000 { - compatible = "renesas,vsp2"; - reg = <0 0xfe920000 0 0x8000>; - interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 624>; - power-domains = <&sysc R8A7795_PD_A3VP>; - resets = <&cpg 624>; - - renesas,fcp = <&fcpvb1>; - }; - - vspd0: vsp@fea20000 { - compatible = "renesas,vsp2"; - reg = <0 0xfea20000 0 0x5000>; - interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 623>; - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - resets = <&cpg 623>; - - renesas,fcp = <&fcpvd0>; - }; - - vspd1: vsp@fea28000 { - compatible = "renesas,vsp2"; - reg = <0 0xfea28000 0 0x5000>; - interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 622>; - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - resets = <&cpg 622>; - - renesas,fcp = <&fcpvd1>; - }; - - vspd2: vsp@fea30000 { - compatible = "renesas,vsp2"; - reg = <0 0xfea30000 0 0x5000>; - interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 621>; - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - resets = <&cpg 621>; - - renesas,fcp = <&fcpvd2>; - }; - - vspi0: vsp@fe9a0000 { - compatible = "renesas,vsp2"; - reg = <0 0xfe9a0000 0 0x8000>; - interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 631>; - power-domains = <&sysc R8A7795_PD_A3VP>; - resets = <&cpg 631>; - - renesas,fcp = <&fcpvi0>; - }; - - vspi1: vsp@fe9b0000 { - compatible = "renesas,vsp2"; - reg = <0 0xfe9b0000 0 0x8000>; - interrupts = <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 630>; - power-domains = <&sysc R8A7795_PD_A3VP>; - resets = <&cpg 630>; - - renesas,fcp = <&fcpvi1>; - }; - csi20: csi2@fea80000 { compatible = "renesas,r8a7795-csi2"; reg = <0 0xfea80000 0 0x10000>; @@ -3098,7 +3112,7 @@ <&cpg CPG_MOD 722>, <&cpg CPG_MOD 721>; clock-names = "du.0", "du.1", "du.2", "du.3"; - vsps = <&vspd0 0 &vspd1 0 &vspd2 0 &vspd0 1>; + vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd0 1>; status = "disabled"; ports { @@ -3168,58 +3182,30 @@ polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsc 0>; + sustainable-power = <6313>; trips { - sensor1_passive: sensor1-passive { - temperature = <95000>; - hysteresis = <1000>; - type = "passive"; - }; sensor1_crit: sensor1-crit { temperature = <120000>; hysteresis = <1000>; type = "critical"; }; }; - - cooling-maps { - map0 { - trip = <&sensor1_passive>; - cooling-device = <&a57_0 4 4>, - <&a57_1 4 4>, - <&a57_2 4 4>, - <&a57_3 4 4>; - }; - }; }; sensor_thermal2: sensor-thermal2 { polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsc 1>; + sustainable-power = <6313>; trips { - sensor2_passive: sensor2-passive { - temperature = <95000>; - hysteresis = <1000>; - type = "passive"; - }; sensor2_crit: sensor2-crit { temperature = <120000>; hysteresis = <1000>; type = "critical"; }; }; - - cooling-maps { - map0 { - trip = <&sensor2_passive>; - cooling-device = <&a57_0 4 4>, - <&a57_1 4 4>, - <&a57_2 4 4>, - <&a57_3 4 4>; - }; - }; }; sensor_thermal3: sensor-thermal3 { @@ -3228,11 +3214,12 @@ thermal-sensors = <&tsc 2>; trips { - sensor3_passive: sensor3-passive { - temperature = <95000>; + target: trip-point1 { + temperature = <100000>; hysteresis = <1000>; type = "passive"; }; + sensor3_crit: sensor3-crit { temperature = <120000>; hysteresis = <1000>; @@ -3242,11 +3229,15 @@ cooling-maps { map0 { - trip = <&sensor3_passive>; - cooling-device = <&a57_0 4 4>, - <&a57_1 4 4>, - <&a57_2 4 4>, - <&a57_3 4 4>; + trip = <&target>; + cooling-device = <&a57_0 2 4>; + contribution = <1024>; + }; + + map1 { + trip = <&target>; + cooling-device = <&a53_0 0 2>; + contribution = <1024>; }; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts index 2aefa53cb16b..de37e91e3b7a 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts @@ -36,11 +36,6 @@ "dclkin.0", "dclkin.1", "dclkin.2"; }; -&sound_card { - dais = <&rsnd_port0 /* ak4613 */ - &rsnd_port1>; /* HDMI0 */ -}; - &hdmi0 { status = "okay"; @@ -81,3 +76,8 @@ }; }; }; + +&sound_card { + dais = <&rsnd_port0 /* ak4613 */ + &rsnd_port1>; /* HDMI0 */ +}; diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts index d58ede18108d..a1cbfef2053f 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts +++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts @@ -36,11 +36,6 @@ "dclkin.0", "dclkin.1", "dclkin.2"; }; -&sound_card { - dais = <&rsnd_port0 /* ak4613 */ - &rsnd_port1>; /* HDMI0 */ -}; - &hdmi0 { status = "okay"; @@ -81,3 +76,8 @@ }; }; }; + +&sound_card { + dais = <&rsnd_port0 /* ak4613 */ + &rsnd_port1>; /* HDMI0 */ +}; diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi index d5e2f4af83a4..3dc9d73f589a 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi @@ -160,6 +160,7 @@ power-domains = <&sysc R8A7796_PD_CA57_CPU0>; next-level-cache = <&L2_CA57>; enable-method = "psci"; + dynamic-power-coefficient = <854>; clocks = <&cpg CPG_CORE R8A7796_CLK_Z>; operating-points-v2 = <&cluster0_opp>; capacity-dmips-mhz = <1024>; @@ -186,6 +187,8 @@ power-domains = <&sysc R8A7796_PD_CA53_CPU0>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + #cooling-cells = <2>; + dynamic-power-coefficient = <277>; clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; capacity-dmips-mhz = <535>; @@ -783,7 +786,7 @@ <&usb_dmac1 0>, <&usb_dmac1 1>; dma-names = "ch0", "ch1", "ch2", "ch3"; renesas,buswait = <11>; - phys = <&usb2_phy0>; + phys = <&usb2_phy0 3>; phy-names = "usb"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; resets = <&cpg 704>, <&cpg 703>; @@ -1319,6 +1322,17 @@ status = "disabled"; }; + tpu: pwm@e6e80000 { + compatible = "renesas,tpu-r8a7796", "renesas,tpu"; + reg = <0 0xe6e80000 0 0x148>; + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 304>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 304>; + #pwm-cells = <3>; + status = "disabled"; + }; + msiof0: spi@e6e90000 { compatible = "renesas,msiof-r8a7796", "renesas,rcar-gen3-msiof"; @@ -1819,6 +1833,17 @@ "ssi.1", "ssi.0"; status = "disabled"; + rcar_sound,ctu { + ctu00: ctu-0 { }; + ctu01: ctu-1 { }; + ctu02: ctu-2 { }; + ctu03: ctu-3 { }; + ctu10: ctu-4 { }; + ctu11: ctu-5 { }; + ctu12: ctu-6 { }; + ctu13: ctu-7 { }; + }; + rcar_sound,dvc { dvc0: dvc-0 { dmas = <&audma1 0xbc>; @@ -1835,17 +1860,6 @@ mix1: mix-1 { }; }; - rcar_sound,ctu { - ctu00: ctu-0 { }; - ctu01: ctu-1 { }; - ctu02: ctu-2 { }; - ctu03: ctu-3 { }; - ctu10: ctu-4 { }; - ctu11: ctu-5 { }; - ctu12: ctu-6 { }; - ctu13: ctu-7 { }; - }; - rcar_sound,src { src0: src-0 { interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; @@ -1899,6 +1913,59 @@ }; }; + rcar_sound,ssi { + ssi0: ssi-0 { + interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x01>, <&audma1 0x02>; + dma-names = "rx", "tx"; + }; + ssi1: ssi-1 { + interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x03>, <&audma1 0x04>; + dma-names = "rx", "tx"; + }; + ssi2: ssi-2 { + interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x05>, <&audma1 0x06>; + dma-names = "rx", "tx"; + }; + ssi3: ssi-3 { + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x07>, <&audma1 0x08>; + dma-names = "rx", "tx"; + }; + ssi4: ssi-4 { + interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x09>, <&audma1 0x0a>; + dma-names = "rx", "tx"; + }; + ssi5: ssi-5 { + interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0b>, <&audma1 0x0c>; + dma-names = "rx", "tx"; + }; + ssi6: ssi-6 { + interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0d>, <&audma1 0x0e>; + dma-names = "rx", "tx"; + }; + ssi7: ssi-7 { + interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0f>, <&audma1 0x10>; + dma-names = "rx", "tx"; + }; + ssi8: ssi-8 { + interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x11>, <&audma1 0x12>; + dma-names = "rx", "tx"; + }; + ssi9: ssi-9 { + interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x13>, <&audma1 0x14>; + dma-names = "rx", "tx"; + }; + }; + rcar_sound,ssiu { ssiu00: ssiu-0 { dmas = <&audma0 0x15>, <&audma1 0x16>; @@ -2109,59 +2176,6 @@ dma-names = "rx", "tx"; }; }; - - rcar_sound,ssi { - ssi0: ssi-0 { - interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x01>, <&audma1 0x02>; - dma-names = "rx", "tx"; - }; - ssi1: ssi-1 { - interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x03>, <&audma1 0x04>; - dma-names = "rx", "tx"; - }; - ssi2: ssi-2 { - interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x05>, <&audma1 0x06>; - dma-names = "rx", "tx"; - }; - ssi3: ssi-3 { - interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x07>, <&audma1 0x08>; - dma-names = "rx", "tx"; - }; - ssi4: ssi-4 { - interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x09>, <&audma1 0x0a>; - dma-names = "rx", "tx"; - }; - ssi5: ssi-5 { - interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x0b>, <&audma1 0x0c>; - dma-names = "rx", "tx"; - }; - ssi6: ssi-6 { - interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x0d>, <&audma1 0x0e>; - dma-names = "rx", "tx"; - }; - ssi7: ssi-7 { - interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x0f>, <&audma1 0x10>; - dma-names = "rx", "tx"; - }; - ssi8: ssi-8 { - interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x11>, <&audma1 0x12>; - dma-names = "rx", "tx"; - }; - ssi9: ssi-9 { - interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x13>, <&audma1 0x14>; - dma-names = "rx", "tx"; - }; - }; }; audma0: dma-controller@ec700000 { @@ -2275,7 +2289,7 @@ reg = <0 0xee080000 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; - phys = <&usb2_phy0>; + phys = <&usb2_phy0 1>; phy-names = "usb"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; resets = <&cpg 703>, <&cpg 704>; @@ -2287,7 +2301,7 @@ reg = <0 0xee0a0000 0 0x100>; interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 702>; - phys = <&usb2_phy1>; + phys = <&usb2_phy1 1>; phy-names = "usb"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; resets = <&cpg 702>; @@ -2299,7 +2313,7 @@ reg = <0 0xee080100 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; - phys = <&usb2_phy0>; + phys = <&usb2_phy0 2>; phy-names = "usb"; companion = <&ohci0>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; @@ -2312,7 +2326,7 @@ reg = <0 0xee0a0100 0 0x100>; interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 702>; - phys = <&usb2_phy1>; + phys = <&usb2_phy1 2>; phy-names = "usb"; companion = <&ohci1>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; @@ -2328,7 +2342,7 @@ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; resets = <&cpg 703>, <&cpg 704>; - #phy-cells = <0>; + #phy-cells = <1>; status = "disabled"; }; @@ -2339,7 +2353,7 @@ clocks = <&cpg CPG_MOD 702>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; resets = <&cpg 702>; - #phy-cells = <0>; + #phy-cells = <1>; status = "disabled"; }; @@ -2814,78 +2828,63 @@ polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsc 0>; + sustainable-power = <3874>; trips { - sensor1_passive: sensor1-passive { - temperature = <95000>; - hysteresis = <1000>; - type = "passive"; - }; sensor1_crit: sensor1-crit { temperature = <120000>; hysteresis = <1000>; type = "critical"; }; }; - - cooling-maps { - map0 { - trip = <&sensor1_passive>; - cooling-device = <&a57_0 5 5>, <&a57_1 5 5>; - }; - }; }; sensor_thermal2: sensor-thermal2 { polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsc 1>; + sustainable-power = <3874>; trips { - sensor2_passive: sensor2-passive { - temperature = <95000>; - hysteresis = <1000>; - type = "passive"; - }; sensor2_crit: sensor2-crit { temperature = <120000>; hysteresis = <1000>; type = "critical"; }; }; - - cooling-maps { - map0 { - trip = <&sensor2_passive>; - cooling-device = <&a57_0 5 5>, <&a57_1 5 5>; - }; - }; }; sensor_thermal3: sensor-thermal3 { polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsc 2>; + sustainable-power = <3874>; + cooling-maps { + map0 { + trip = <&target>; + cooling-device = <&a57_0 2 4>; + contribution = <1024>; + }; + map1 { + trip = <&target>; + cooling-device = <&a53_0 0 2>; + contribution = <1024>; + }; + }; trips { - sensor3_passive: sensor3-passive { - temperature = <95000>; + target: trip-point1 { + temperature = <100000>; hysteresis = <1000>; type = "passive"; }; + sensor3_crit: sensor3-crit { temperature = <120000>; hysteresis = <1000>; type = "critical"; }; }; - - cooling-maps { - map0 { - trip = <&sensor3_passive>; - cooling-device = <&a57_0 5 5>, <&a57_1 5 5>; - }; - }; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dts index 340a3c72b65a..660a0240eec5 100644 --- a/arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dts @@ -41,9 +41,37 @@ remote-endpoint = <&hdmi0_con>; }; }; + port@2 { + reg = <2>; + dw_hdmi0_snd_in: endpoint { + remote-endpoint = <&rsnd_endpoint1>; + }; + }; }; }; &hdmi0_con { remote-endpoint = <&rcar_dw_hdmi0_out>; }; + +&rcar_sound { + ports { + rsnd_port1: port@1 { + reg = <1>; + rsnd_endpoint1: endpoint { + remote-endpoint = <&dw_hdmi0_snd_in>; + + dai-format = "i2s"; + bitclock-master = <&rsnd_endpoint1>; + frame-master = <&rsnd_endpoint1>; + + playback = <&ssi2>; + }; + }; + }; +}; + +&sound_card { + dais = <&rsnd_port0 /* ak4613 */ + &rsnd_port1>; /* HDMI0 */ +}; diff --git a/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts index f03a5e9e0c42..5cef64605464 100644 --- a/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts +++ b/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts @@ -41,6 +41,12 @@ remote-endpoint = <&hdmi0_con>; }; }; + port@2 { + reg = <2>; + dw_hdmi0_snd_in: endpoint { + remote-endpoint = <&rsnd_endpoint1>; + }; + }; }; }; @@ -57,7 +63,29 @@ }; }; +&rcar_sound { + ports { + rsnd_port1: port@1 { + reg = <1>; + rsnd_endpoint1: endpoint { + remote-endpoint = <&dw_hdmi0_snd_in>; + + dai-format = "i2s"; + bitclock-master = <&rsnd_endpoint1>; + frame-master = <&rsnd_endpoint1>; + + playback = <&ssi2>; + }; + }; + }; +}; + /* SW12-7 must be set 'Off' (MD12 set to 1) which is not the default! */ &sata { status = "okay"; }; + +&sound_card { + dais = <&rsnd_port0 /* ak4613 */ + &rsnd_port1>; /* HDMI0 */ +}; diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi index 2554b1742dbf..4ae163220f60 100644 --- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi @@ -111,6 +111,8 @@ power-domains = <&sysc R8A77965_PD_CA57_CPU0>; next-level-cache = <&L2_CA57>; enable-method = "psci"; + #cooling-cells = <2>; + dynamic-power-coefficient = <854>; clocks = <&cpg CPG_CORE R8A77965_CLK_Z>; operating-points-v2 = <&cluster0_opp>; }; @@ -667,7 +669,7 @@ <&usb_dmac1 0>, <&usb_dmac1 1>; dma-names = "ch0", "ch1", "ch2", "ch3"; renesas,buswait = <11>; - phys = <&usb2_phy0>; + phys = <&usb2_phy0 3>; phy-names = "usb"; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; resets = <&cpg 704>, <&cpg 703>; @@ -1195,6 +1197,17 @@ status = "disabled"; }; + tpu: pwm@e6e80000 { + compatible = "renesas,tpu-r8a77965", "renesas,tpu"; + reg = <0 0xe6e80000 0 0x148>; + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 304>; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 304>; + #pwm-cells = <3>; + status = "disabled"; + }; + msiof0: spi@e6e90000 { compatible = "renesas,msiof-r8a77965", "renesas,rcar-gen3-msiof"; @@ -2015,7 +2028,7 @@ reg = <0 0xee080000 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; - phys = <&usb2_phy0>; + phys = <&usb2_phy0 1>; phy-names = "usb"; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; resets = <&cpg 703>, <&cpg 704>; @@ -2027,7 +2040,7 @@ reg = <0 0xee0a0000 0 0x100>; interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 702>; - phys = <&usb2_phy1>; + phys = <&usb2_phy1 1>; phy-names = "usb"; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; resets = <&cpg 702>; @@ -2039,7 +2052,7 @@ reg = <0 0xee080100 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; - phys = <&usb2_phy0>; + phys = <&usb2_phy0 2>; phy-names = "usb"; companion = <&ohci0>; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; @@ -2052,7 +2065,7 @@ reg = <0 0xee0a0100 0 0x100>; interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 702>; - phys = <&usb2_phy1>; + phys = <&usb2_phy1 2>; phy-names = "usb"; companion = <&ohci1>; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; @@ -2068,7 +2081,7 @@ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; resets = <&cpg 703>, <&cpg 704>; - #phy-cells = <0>; + #phy-cells = <1>; status = "disabled"; }; @@ -2079,7 +2092,7 @@ clocks = <&cpg CPG_MOD 702>; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; resets = <&cpg 702>; - #phy-cells = <0>; + #phy-cells = <1>; status = "disabled"; }; @@ -2242,14 +2255,6 @@ renesas,fcp = <&fcpvb0>; }; - fcpvb0: fcp@fe96f000 { - compatible = "renesas,fcpv"; - reg = <0 0xfe96f000 0 0x200>; - clocks = <&cpg CPG_MOD 607>; - power-domains = <&sysc R8A77965_PD_A3VP>; - resets = <&cpg 607>; - }; - vspi0: vsp@fe9a0000 { compatible = "renesas,vsp2"; reg = <0 0xfe9a0000 0 0x8000>; @@ -2261,14 +2266,6 @@ renesas,fcp = <&fcpvi0>; }; - fcpvi0: fcp@fe9af000 { - compatible = "renesas,fcpv"; - reg = <0 0xfe9af000 0 0x200>; - clocks = <&cpg CPG_MOD 611>; - power-domains = <&sysc R8A77965_PD_A3VP>; - resets = <&cpg 611>; - }; - vspd0: vsp@fea20000 { compatible = "renesas,vsp2"; reg = <0 0xfea20000 0 0x5000>; @@ -2280,14 +2277,6 @@ renesas,fcp = <&fcpvd0>; }; - fcpvd0: fcp@fea27000 { - compatible = "renesas,fcpv"; - reg = <0 0xfea27000 0 0x200>; - clocks = <&cpg CPG_MOD 603>; - power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; - resets = <&cpg 603>; - }; - vspd1: vsp@fea28000 { compatible = "renesas,vsp2"; reg = <0 0xfea28000 0 0x5000>; @@ -2299,6 +2288,22 @@ renesas,fcp = <&fcpvd1>; }; + fcpvb0: fcp@fe96f000 { + compatible = "renesas,fcpv"; + reg = <0 0xfe96f000 0 0x200>; + clocks = <&cpg CPG_MOD 607>; + power-domains = <&sysc R8A77965_PD_A3VP>; + resets = <&cpg 607>; + }; + + fcpvd0: fcp@fea27000 { + compatible = "renesas,fcpv"; + reg = <0 0xfea27000 0 0x200>; + clocks = <&cpg CPG_MOD 603>; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 603>; + }; + fcpvd1: fcp@fea2f000 { compatible = "renesas,fcpv"; reg = <0 0xfea2f000 0 0x200>; @@ -2307,6 +2312,14 @@ resets = <&cpg 602>; }; + fcpvi0: fcp@fe9af000 { + compatible = "renesas,fcpv"; + reg = <0 0xfe9af000 0 0x200>; + clocks = <&cpg CPG_MOD 611>; + power-domains = <&sysc R8A77965_PD_A3VP>; + resets = <&cpg 611>; + }; + csi20: csi2@fea80000 { compatible = "renesas,r8a77965-csi2"; reg = <0 0xfea80000 0 0x10000>; @@ -2456,7 +2469,7 @@ clock-names = "du.0", "du.1", "du.3"; status = "disabled"; - vsps = <&vspd0 0 &vspd1 0 &vspd0 1>; + vsps = <&vspd0 0>, <&vspd1 0>, <&vspd0 1>; ports { #address-cells = <1>; @@ -2519,6 +2532,7 @@ polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsc 0>; + sustainable-power = <2439>; trips { sensor1_crit: sensor1-crit { @@ -2533,6 +2547,7 @@ polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsc 1>; + sustainable-power = <2439>; trips { sensor2_crit: sensor2-crit { @@ -2547,14 +2562,30 @@ polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsc 2>; + sustainable-power = <2439>; trips { + target: trip-point1 { + /* miliCelsius */ + temperature = <100000>; + hysteresis = <1000>; + type = "passive"; + }; + sensor3_crit: sensor3-crit { temperature = <120000>; hysteresis = <1000>; type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&target>; + cooling-device = <&a57_0 2 4>; + contribution = <1024>; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts index b6d53321576b..2afb91ec9c8d 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts +++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts @@ -19,14 +19,17 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:115200n8"; }; - memory@48000000 { - device_type = "memory"; - /* first 128MB is reserved for secure area. */ - reg = <0x0 0x48000000 0x0 0x38000000>; + d3p3: regulator-fixed { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; }; hdmi-out { @@ -40,15 +43,6 @@ }; }; - d3p3: regulator-fixed { - compatible = "regulator-fixed"; - regulator-name = "fixed-3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - lvds-decoder { compatible = "thine,thc63lvd1024"; @@ -73,6 +67,12 @@ }; }; }; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x38000000>; + }; }; &avb { @@ -102,6 +102,10 @@ }; }; +&du { + status = "okay"; +}; + &extal_clk { clock-frequency = <16666666>; }; @@ -157,6 +161,18 @@ }; }; +&lvds0 { + status = "okay"; + + ports { + port@1 { + lvds0_out: endpoint { + remote-endpoint = <&thc63lvd1024_in>; + }; + }; + }; +}; + &pfc { avb_pins: avb0 { groups = "avb0_mdio", "avb0_rgmii", "avb0_txcrefclk"; @@ -190,19 +206,3 @@ status = "okay"; }; - -&du { - status = "okay"; -}; - -&lvds0 { - status = "okay"; - - ports { - port@1 { - lvds0_out: endpoint { - remote-endpoint = <&thc63lvd1024_in>; - }; - }; - }; -}; diff --git a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts index 15cc9fed2e16..d7c7b9156e08 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts +++ b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts @@ -21,6 +21,41 @@ stdout-path = "serial0:115200n8"; }; + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&adv7511_out>; + }; + }; + }; + + lvds-decoder { + compatible = "thine,thc63lvd1024"; + vcc-supply = <&vcc_d3_3v>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + thc63lvd1024_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + + port@2 { + reg = <2>; + thc63lvd1024_out: endpoint { + remote-endpoint = <&adv7511_in>; + }; + }; + }; + }; + memory@48000000 { device_type = "memory"; /* first 128MB is reserved for secure area. */ @@ -59,41 +94,6 @@ regulator-boot-on; regulator-always-on; }; - - lvds-decoder { - compatible = "thine,thc63lvd1024"; - vcc-supply = <&vcc_d3_3v>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - thc63lvd1024_in: endpoint { - remote-endpoint = <&lvds0_out>; - }; - }; - - port@2 { - reg = <2>; - thc63lvd1024_out: endpoint { - remote-endpoint = <&adv7511_in>; - }; - }; - }; - }; - - hdmi-out { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_con: endpoint { - remote-endpoint = <&adv7511_out>; - }; - }; - }; }; &avb { @@ -128,29 +128,6 @@ clock-frequency = <32768>; }; -&pfc { - avb_pins: avb0 { - groups = "avb0_mdio", "avb0_rgmii", "avb0_txcrefclk"; - function = "avb0"; - }; - - i2c0_pins: i2c0 { - groups = "i2c0"; - function = "i2c0"; - }; - - mmc_pins: mmc_3_3v { - groups = "mmc_data8", "mmc_ctrl"; - function = "mmc"; - power-source = <3300>; - }; - - scif0_pins: scif0 { - groups = "scif0_data"; - function = "scif0"; - }; -}; - &i2c0 { pinctrl-0 = <&i2c0_pins>; pinctrl-names = "default"; @@ -220,6 +197,29 @@ status = "okay"; }; +&pfc { + avb_pins: avb0 { + groups = "avb0_mdio", "avb0_rgmii", "avb0_txcrefclk"; + function = "avb0"; + }; + + i2c0_pins: i2c0 { + groups = "i2c0"; + function = "i2c0"; + }; + + mmc_pins: mmc_3_3v { + groups = "mmc_data8", "mmc_ctrl"; + function = "mmc"; + power-source = <3300>; + }; + + scif0_pins: scif0 { + groups = "scif0_data"; + function = "scif0"; + }; +}; + &scif0 { pinctrl-0 = <&scif0_pins>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/renesas/r8a77970.dtsi b/arch/arm64/boot/dts/renesas/r8a77970.dtsi index 5b6164d4b8e3..0cd3b376635d 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77970.dtsi @@ -1181,6 +1181,9 @@ polling-delay = <1000>; thermal-sensors = <&thermal>; + cooling-maps { + }; + trips { cpu-crit { temperature = <120000>; @@ -1188,9 +1191,6 @@ type = "critical"; }; }; - - cooling-maps { - }; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts index 5a7012be0d6a..3dde028e22a6 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts +++ b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts @@ -22,35 +22,20 @@ stdout-path = "serial0:115200n8"; }; - memory@48000000 { - device_type = "memory"; - /* first 128MB is reserved for secure area. */ - reg = <0 0x48000000 0 0x78000000>; - }; - - d3_3v: regulator-0 { - compatible = "regulator-fixed"; - regulator-name = "D3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - vddq_vin01: regulator-1 { + d1_8v: regulator-2 { compatible = "regulator-fixed"; - regulator-name = "VDDQ_VIN01"; + regulator-name = "D1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-boot-on; regulator-always-on; }; - d1_8v: regulator-2 { + d3_3v: regulator-0 { compatible = "regulator-fixed"; - regulator-name = "D1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + regulator-name = "D3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; }; @@ -90,6 +75,21 @@ }; }; + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0 0x48000000 0 0x78000000>; + }; + + vddq_vin01: regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "VDDQ_VIN01"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + x1_clk: x1-clock { compatible = "fixed-clock"; #clock-cells = <0>; diff --git a/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts index dd14a41b32cd..adbfd8f07d06 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts +++ b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts @@ -22,12 +22,6 @@ stdout-path = "serial0:115200n8"; }; - memory@48000000 { - device_type = "memory"; - /* first 128MB is reserved for secure area. */ - reg = <0 0x48000000 0 0x78000000>; - }; - hdmi-out { compatible = "hdmi-connector"; type = "a"; @@ -63,6 +57,12 @@ }; }; + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0 0x48000000 0 0x78000000>; + }; + osc1_clk: osc1-clock { compatible = "fixed-clock"; #clock-cells = <0>; diff --git a/arch/arm64/boot/dts/renesas/r8a77980.dtsi b/arch/arm64/boot/dts/renesas/r8a77980.dtsi index a901a341dcf7..461a47ea656d 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77980.dtsi @@ -1299,9 +1299,9 @@ #iommu-cells = <1>; }; - ipmmu_vc0: mmu@fe6b0000 { + ipmmu_vc0: mmu@fe990000 { compatible = "renesas,ipmmu-r8a77980"; - reg = <0 0xfe6b0000 0 0x1000>; + reg = <0 0xfe990000 0 0x1000>; renesas,ipmmu-main = <&ipmmu_mm 12>; power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; #iommu-cells = <1>; diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts index c72772589953..b38f9d442fc0 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts +++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts @@ -19,16 +19,10 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:115200n8"; }; - memory@48000000 { - device_type = "memory"; - /* first 128MB is reserved for secure area. */ - reg = <0x0 0x48000000 0x0 0x38000000>; - }; - audio_clkout: audio-clkout { /* * This is same as <&rcar_sound 0> @@ -107,36 +101,10 @@ }; }; - vga { - compatible = "vga-connector"; - - port { - vga_in: endpoint { - remote-endpoint = <&adv7123_out>; - }; - }; - }; - - vga-encoder { - compatible = "adi,adv7123"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - adv7123_in: endpoint { - remote-endpoint = <&du_out_rgb>; - }; - }; - port@1 { - reg = <1>; - adv7123_out: endpoint { - remote-endpoint = <&vga_in>; - }; - }; - }; + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x38000000>; }; reg_1p8v: regulator0 { @@ -157,15 +125,13 @@ regulator-always-on; }; - vbus0_usb2: regulator-vbus0-usb2 { + reg_12p0v: regulator2 { compatible = "regulator-fixed"; - - regulator-name = "USB20_VBUS_CN"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - - gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>; - enable-active-high; + regulator-name = "D12.0V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-boot-on; + regulator-always-on; }; rsnd_ak4613: sound { @@ -176,34 +142,24 @@ simple-audio-card,bitclock-master = <&sndcpu>; simple-audio-card,frame-master = <&sndcpu>; - sndcpu: simple-audio-card,cpu { - sound-dai = <&rcar_sound>; - }; - sndcodec: simple-audio-card,codec { sound-dai = <&ak4613>; }; - }; - x12_clk: x12 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <24576000>; + sndcpu: simple-audio-card,cpu { + sound-dai = <&rcar_sound>; + }; }; - reg_12p0v: regulator2 { + vbus0_usb2: regulator-vbus0-usb2 { compatible = "regulator-fixed"; - regulator-name = "D12.0V"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - regulator-boot-on; - regulator-always-on; - }; - x13_clk: x13 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <74250000>; + regulator-name = "USB20_VBUS_CN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>; + enable-active-high; }; vcc_sdhi0: regulator-vcc-sdhi0 { @@ -253,6 +209,50 @@ states = <3300000 1 1800000 0>; }; + + vga { + compatible = "vga-connector"; + + port { + vga_in: endpoint { + remote-endpoint = <&adv7123_out>; + }; + }; + }; + + vga-encoder { + compatible = "adi,adv7123"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7123_in: endpoint { + remote-endpoint = <&du_out_rgb>; + }; + }; + port@1 { + reg = <1>; + adv7123_out: endpoint { + remote-endpoint = <&vga_in>; + }; + }; + }; + }; + + x12_clk: x12 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; + + x13_clk: x13 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <74250000>; + }; }; &audio_clk_a { @@ -262,7 +262,6 @@ &avb { pinctrl-0 = <&avb_pins>; pinctrl-names = "default"; - renesas,no-ether-link; phy-handle = <&phy0>; status = "okay"; @@ -272,6 +271,14 @@ interrupt-parent = <&gpio2>; interrupts = <21 IRQ_TYPE_LEVEL_LOW>; reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; + /* + * TX clock internal delay mode is required for reliable + * 1Gbps communication using the KSZ9031RNX phy present on + * the Ebisu board, however, TX clock internal delay mode + * isn't supported on r8a77990. Thus, limit speed to + * 100Mbps for reliable communication. + */ + max-speed = <100>; }; }; @@ -548,6 +555,11 @@ function = "pwm5"; }; + scif2_pins: scif2 { + groups = "scif2_data_a"; + function = "scif2"; + }; + sdhi0_pins: sd0 { groups = "sdhi0_data4", "sdhi0_ctrl"; function = "sdhi0"; @@ -578,20 +590,15 @@ power-source = <1800>; }; - sound_pins: sound { - groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data"; - function = "ssi"; - }; - sound_clk_pins: sound_clk { groups = "audio_clk_a", "audio_clk_b_a", "audio_clk_c_a", "audio_clkout_a", "audio_clkout1_a"; function = "audio_clk"; }; - scif2_pins: scif2 { - groups = "scif2_data_a"; - function = "scif2"; + sound_pins: sound { + groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data"; + function = "ssi"; }; usb0_pins: usb { @@ -672,38 +679,6 @@ status = "okay"; }; -&ssi1 { - shared-pin; -}; - -&usb2_phy0 { - pinctrl-0 = <&usb0_pins>; - pinctrl-names = "default"; - - vbus-supply = <&vbus0_usb2>; - status = "okay"; -}; - -&usb3_peri0 { - companion = <&xhci0>; - status = "okay"; -}; - -&vin4 { - status = "okay"; -}; - -&vin5 { - status = "okay"; -}; - -&xhci0 { - pinctrl-0 = <&usb30_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - &sdhi0 { pinctrl-0 = <&sdhi0_pins>; pinctrl-1 = <&sdhi0_pins_uhs>; @@ -747,3 +722,35 @@ non-removable; status = "okay"; }; + +&ssi1 { + shared-pin; +}; + +&usb2_phy0 { + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; + + vbus-supply = <&vbus0_usb2>; + status = "okay"; +}; + +&usb3_peri0 { + companion = <&xhci0>; + status = "okay"; +}; + +&vin4 { + status = "okay"; +}; + +&vin5 { + status = "okay"; +}; + +&xhci0 { + pinctrl-0 = <&usb30_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi index 56cb566ffa09..455954c3d98e 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi @@ -84,9 +84,11 @@ compatible = "arm,cortex-a53"; reg = <0>; device_type = "cpu"; + #cooling-cells = <2>; power-domains = <&sysc R8A77990_PD_CA53_CPU0>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + dynamic-power-coefficient = <277>; clocks =<&cpg CPG_CORE R8A77990_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; }; @@ -630,7 +632,7 @@ <&usb_dmac1 0>, <&usb_dmac1 1>; dma-names = "ch0", "ch1", "ch2", "ch3"; renesas,buswait = <11>; - phys = <&usb2_phy0>; + phys = <&usb2_phy0 3>; phy-names = "usb"; power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 704>, <&cpg 703>; @@ -1324,6 +1326,17 @@ "ssi.1", "ssi.0"; status = "disabled"; + rcar_sound,ctu { + ctu00: ctu-0 { }; + ctu01: ctu-1 { }; + ctu02: ctu-2 { }; + ctu03: ctu-3 { }; + ctu10: ctu-4 { }; + ctu11: ctu-5 { }; + ctu12: ctu-6 { }; + ctu13: ctu-7 { }; + }; + rcar_sound,dvc { dvc0: dvc-0 { dmas = <&audma0 0xbc>; @@ -1340,17 +1353,6 @@ mix1: mix-1 { }; }; - rcar_sound,ctu { - ctu00: ctu-0 { }; - ctu01: ctu-1 { }; - ctu02: ctu-2 { }; - ctu03: ctu-3 { }; - ctu10: ctu-4 { }; - ctu11: ctu-5 { }; - ctu12: ctu-6 { }; - ctu13: ctu-7 { }; - }; - rcar_sound,src { src0: src-0 { interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; @@ -1537,7 +1539,7 @@ reg = <0 0xee080000 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; - phys = <&usb2_phy0>; + phys = <&usb2_phy0 1>; phy-names = "usb"; power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 703>, <&cpg 704>; @@ -1549,7 +1551,7 @@ reg = <0 0xee080100 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; - phys = <&usb2_phy0>; + phys = <&usb2_phy0 2>; phy-names = "usb"; companion = <&ohci0>; power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; @@ -1565,7 +1567,7 @@ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 703>, <&cpg 704>; - #phy-cells = <0>; + #phy-cells = <1>; status = "disabled"; }; @@ -1758,13 +1760,15 @@ du: display@feb00000 { compatible = "renesas,du-r8a77990"; - reg = <0 0xfeb00000 0 0x80000>; + reg = <0 0xfeb00000 0 0x40000>; interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>; clock-names = "du.0", "du.1"; - vsps = <&vspd0 0 &vspd1 0>; + resets = <&cpg 724>; + reset-names = "du.0"; + vsps = <&vspd0 0>, <&vspd1 0>; status = "disabled"; ports { @@ -1801,6 +1805,8 @@ resets = <&cpg 727>; status = "disabled"; + renesas,companion = <&lvds1>; + ports { #address-cells = <1>; #size-cells = <0>; @@ -1856,18 +1862,30 @@ thermal-zones { cpu-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; - thermal-sensors = <&thermal>; + polling-delay = <0>; + thermal-sensors = <&thermal 0>; + sustainable-power = <717>; + + cooling-maps { + map0 { + trip = <&target>; + cooling-device = <&a53_0 0 2>; + contribution = <1024>; + }; + }; trips { - cpu-crit { + sensor1_crit: sensor1-crit { temperature = <120000>; hysteresis = <2000>; type = "critical"; }; - }; - cooling-maps { + target: trip-point1 { + temperature = <100000>; + hysteresis = <2000>; + type = "passive"; + }; }; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts index a7dc11e36fd9..67634cb01d6b 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts +++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts @@ -19,11 +19,6 @@ ethernet0 = &avb; }; - chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; - stdout-path = "serial0:115200n8"; - }; - backlight: backlight { compatible = "pwm-backlight"; pwms = <&pwm1 0 50000>; @@ -35,6 +30,11 @@ enable-gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>; }; + chosen { + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; + stdout-path = "serial0:115200n8"; + }; + composite-in { compatible = "composite-video-connector"; @@ -97,7 +97,7 @@ reg = <0x0 0x48000000 0x0 0x18000000>; }; - reg_1p8v: regulator0 { + reg_1p8v: regulator-1p8v { compatible = "regulator-fixed"; regulator-name = "fixed-1.8V"; regulator-min-microvolt = <1800000>; @@ -106,7 +106,7 @@ regulator-always-on; }; - reg_3p3v: regulator1 { + reg_3p3v: regulator-3p3v { compatible = "regulator-fixed"; regulator-name = "fixed-3.3V"; regulator-min-microvolt = <3300000>; @@ -115,7 +115,7 @@ regulator-always-on; }; - reg_12p0v: regulator1 { + reg_12p0v: regulator-12p0v { compatible = "regulator-fixed"; regulator-name = "D12.0V"; regulator-min-microvolt = <12000000>; @@ -175,6 +175,14 @@ reg = <0>; interrupt-parent = <&gpio5>; interrupts = <19 IRQ_TYPE_LEVEL_LOW>; + /* + * TX clock internal delay mode is required for reliable + * 1Gbps communication using the KSZ9031RNX phy present on + * the Draak board, however, TX clock internal delay mode + * isn't supported on r8a77995. Thus, limit speed to + * 100Mbps for reliable communication. + */ + max-speed = <100>; }; }; @@ -511,12 +519,7 @@ status = "okay"; ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - + port { vin4_in: endpoint { remote-endpoint = <&adv7180_out>; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi index 5bf3af246e14..183fef86cf7c 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi @@ -242,41 +242,6 @@ resets = <&cpg 407>; }; - hscif0: serial@e6540000 { - compatible = "renesas,hscif-r8a77995", - "renesas,rcar-gen3-hscif", - "renesas,hscif"; - reg = <0 0xe6540000 0 0x60>; - interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 520>, - <&cpg CPG_CORE R8A77995_CLK_S3D1C>, - <&scif_clk>; - clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac1 0x31>, <&dmac1 0x30>, - <&dmac2 0x31>, <&dmac2 0x30>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; - resets = <&cpg 520>; - status = "disabled"; - }; - - hscif3: serial@e66a0000 { - compatible = "renesas,hscif-r8a77995", - "renesas,rcar-gen3-hscif", - "renesas,hscif"; - reg = <0 0xe66a0000 0 0x60>; - interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 517>, - <&cpg CPG_CORE R8A77995_CLK_S3D1C>, - <&scif_clk>; - clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x37>, <&dmac0 0x36>; - dma-names = "tx", "rx"; - power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; - resets = <&cpg 517>; - status = "disabled"; - }; - i2c0: i2c@e6500000 { #address-cells = <1>; #size-cells = <0>; @@ -344,6 +309,41 @@ status = "disabled"; }; + hscif0: serial@e6540000 { + compatible = "renesas,hscif-r8a77995", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6540000 0 0x60>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 520>, + <&cpg CPG_CORE R8A77995_CLK_S3D1C>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x31>, <&dmac1 0x30>, + <&dmac2 0x31>, <&dmac2 0x30>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 520>; + status = "disabled"; + }; + + hscif3: serial@e66a0000 { + compatible = "renesas,hscif-r8a77995", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe66a0000 0 0x60>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 517>, + <&cpg CPG_CORE R8A77995_CLK_S3D1C>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x37>, <&dmac0 0x36>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 517>; + status = "disabled"; + }; + hsusb: usb@e6590000 { compatible = "renesas,usbhs-r8a77995", "renesas,rcar-gen3-usbhs"; @@ -354,7 +354,7 @@ <&usb_dmac1 0>, <&usb_dmac1 1>; dma-names = "ch0", "ch1", "ch2", "ch3"; renesas,buswait = <11>; - phys = <&usb2_phy0>; + phys = <&usb2_phy0 3>; phy-names = "usb"; power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; resets = <&cpg 704>, <&cpg 703>; @@ -875,7 +875,7 @@ reg = <0 0xee080000 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; - phys = <&usb2_phy0>; + phys = <&usb2_phy0 1>; phy-names = "usb"; power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; resets = <&cpg 703>, <&cpg 704>; @@ -887,7 +887,7 @@ reg = <0 0xee080100 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; - phys = <&usb2_phy0>; + phys = <&usb2_phy0 2>; phy-names = "usb"; companion = <&ohci0>; power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; @@ -903,7 +903,7 @@ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; resets = <&cpg 703>, <&cpg 704>; - #phy-cells = <0>; + #phy-cells = <1>; status = "disabled"; }; @@ -995,13 +995,15 @@ du: display@feb00000 { compatible = "renesas,du-r8a77995"; - reg = <0 0xfeb00000 0 0x80000>; + reg = <0 0xfeb00000 0 0x40000>; interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>; clock-names = "du.0", "du.1"; - vsps = <&vspd0 0 &vspd1 0>; + resets = <&cpg 724>; + reset-names = "du.0"; + vsps = <&vspd0 0>, <&vspd1 0>; status = "disabled"; ports { @@ -1038,6 +1040,8 @@ resets = <&cpg 727>; status = "disabled"; + renesas,companion = <&lvds1>; + ports { #address-cells = <1>; #size-cells = <0>; @@ -1096,6 +1100,9 @@ polling-delay = <1000>; thermal-sensors = <&thermal>; + cooling-maps { + }; + trips { cpu-crit { temperature = <120000>; @@ -1103,9 +1110,6 @@ type = "critical"; }; }; - - cooling-maps { - }; }; }; diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi index 2dba1328acfa..21e01056e759 100644 --- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi +++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi @@ -39,7 +39,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:115200n8"; }; @@ -87,6 +87,28 @@ }; }; + hdmi0-out { + compatible = "hdmi-connector"; + label = "HDMI0 OUT"; + type = "a"; + + port { + hdmi0_con: endpoint { + }; + }; + }; + + hdmi1-out { + compatible = "hdmi-connector"; + label = "HDMI1 OUT"; + type = "a"; + + port { + hdmi1_con: endpoint { + }; + }; + }; + keys { compatible = "gpio-keys"; @@ -238,28 +260,6 @@ 1800000 0>; }; - hdmi0-out { - compatible = "hdmi-connector"; - label = "HDMI0 OUT"; - type = "a"; - - port { - hdmi0_con: endpoint { - }; - }; - }; - - hdmi1-out { - compatible = "hdmi-connector"; - label = "HDMI1 OUT"; - type = "a"; - - port { - hdmi1_con: endpoint { - }; - }; - }; - vga { compatible = "vga-connector"; @@ -462,20 +462,6 @@ #gpio-cells = <2>; }; - csa_vdd: adc@7c { - compatible = "maxim,max9611"; - reg = <0x7c>; - - shunt-resistor-micro-ohms = <5000>; - }; - - csa_dvfs: adc@7f { - compatible = "maxim,max9611"; - reg = <0x7f>; - - shunt-resistor-micro-ohms = <5000>; - }; - video-receiver@70 { compatible = "adi,adv7482"; reg = <0x70 0x71 0x72 0x73 0x74 0x75 @@ -527,6 +513,20 @@ }; }; }; + + csa_vdd: adc@7c { + compatible = "maxim,max9611"; + reg = <0x7c>; + + shunt-resistor-micro-ohms = <5000>; + }; + + csa_dvfs: adc@7f { + compatible = "maxim,max9611"; + reg = <0x7f>; + + shunt-resistor-micro-ohms = <5000>; + }; }; &i2c_dvfs { diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi index 7a09576b3112..202177706cde 100644 --- a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi @@ -38,6 +38,18 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; }; + + wlan_en: regulator-wlan_en { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio_exp_74 4 GPIO_ACTIVE_HIGH>; + startup-delay-us = <70000>; + enable-active-high; + }; }; &can0 { @@ -71,6 +83,56 @@ }; &i2c2 { + i2cswitch2: i2c-switch@71 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x71>; + reset-gpios = <&gpio5 3 GPIO_ACTIVE_LOW>; + + /* Audio_SDA, Audio_SCL */ + i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + + pcm3168a: audio-codec@44 { + #sound-dai-cells = <0>; + compatible = "ti,pcm3168a"; + reg = <0x44>; + clocks = <&clksndsel>; + clock-names = "scki"; + + VDD1-supply = <&snd_3p3v>; + VDD2-supply = <&snd_3p3v>; + VCCAD1-supply = <&snd_vcc5v>; + VCCAD2-supply = <&snd_vcc5v>; + VCCDA1-supply = <&snd_vcc5v>; + VCCDA2-supply = <&snd_vcc5v>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + mclk-fs = <512>; + port@0 { + reg = <0>; + pcm3168a_endpoint_p: endpoint { + remote-endpoint = <&rsnd_for_pcm3168a_play>; + clocks = <&clksndsel>; + }; + }; + port@1 { + reg = <1>; + pcm3168a_endpoint_c: endpoint { + remote-endpoint = <&rsnd_for_pcm3168a_capture>; + clocks = <&clksndsel>; + }; + }; + }; + }; + }; + }; + /* U11 */ gpio_exp_74: gpio@74 { compatible = "ti,tca9539"; @@ -102,6 +164,13 @@ line-name = "HUB rst"; }; + otg_extlpn { + gpio-hog; + gpios = <9 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "OTG EXTLPn"; + }; + otg_offvbusn { gpio-hog; gpios = <8 GPIO_ACTIVE_HIGH>; @@ -109,11 +178,11 @@ line-name = "OTG OFFVBUSn"; }; - otg_extlpn { + sd-wifi-mux { gpio-hog; - gpios = <9 GPIO_ACTIVE_HIGH>; - output-high; - line-name = "OTG EXTLPn"; + gpios = <5 GPIO_ACTIVE_HIGH>; + output-low; /* Connect WL1837 */ + line-name = "SD WiFi mux"; }; snd_rst { @@ -134,59 +203,17 @@ interrupt-parent = <&gpio6>; interrupts = <4 IRQ_TYPE_EDGE_FALLING>; }; +}; - i2cswitch2: i2c-switch@71 { +&i2c4 { + i2cswitch4: i2c-switch@71 { compatible = "nxp,pca9548"; #address-cells = <1>; #size-cells = <0>; reg = <0x71>; - reset-gpios = <&gpio5 3 GPIO_ACTIVE_LOW>; - - /* Audio_SDA, Audio_SCL */ - i2c@7 { - #address-cells = <1>; - #size-cells = <0>; - reg = <7>; - - pcm3168a: audio-codec@44 { - #sound-dai-cells = <0>; - compatible = "ti,pcm3168a"; - reg = <0x44>; - clocks = <&clksndsel>; - clock-names = "scki"; - - VDD1-supply = <&snd_3p3v>; - VDD2-supply = <&snd_3p3v>; - VCCAD1-supply = <&snd_vcc5v>; - VCCAD2-supply = <&snd_vcc5v>; - VCCDA1-supply = <&snd_vcc5v>; - VCCDA2-supply = <&snd_vcc5v>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - mclk-fs = <512>; - port@0 { - reg = <0>; - pcm3168a_endpoint_p: endpoint { - remote-endpoint = <&rsnd_for_pcm3168a_play>; - clocks = <&clksndsel>; - }; - }; - port@1 { - reg = <1>; - pcm3168a_endpoint_c: endpoint { - remote-endpoint = <&rsnd_for_pcm3168a_capture>; - clocks = <&clksndsel>; - }; - }; - }; - }; - }; + reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; }; -}; -&i2c4 { gpio_exp_76: gpio@76 { compatible = "ti,tca9539"; reg = <0x76>; @@ -206,14 +233,6 @@ interrupt-parent = <&gpio5>; interrupts = <9 IRQ_TYPE_EDGE_FALLING>; }; - - i2cswitch4: i2c-switch@71 { - compatible = "nxp,pca9548"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x71>; - reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; - }; }; &ohci0 { @@ -254,42 +273,21 @@ function = "scif1"; }; - usb0_pins: usb0 { - groups = "usb0"; - function = "usb0"; + sdhi3_pins: sdhi3 { + groups = "sdhi3_data4", "sdhi3_ctrl"; + function = "sdhi3"; + power-source = <3300>; }; sound_pcm_pins: sound-pcm { groups = "ssi349_ctrl", "ssi3_data", "ssi4_data"; function = "ssi"; }; -}; - -&scif1 { - pinctrl-0 = <&scif1_pins>; - pinctrl-names = "default"; - uart-has-rtscts; - - status = "okay"; -}; - -&usb2_phy0 { - pinctrl-0 = <&usb0_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; -&xhci0 { - status = "okay"; -}; - -&sound_card { - dais = <&rsnd_port0 /* ak4613 */ - &rsnd_port1 /* HDMI0 */ - &rsnd_port2 /* pcm3168a playback */ - &rsnd_port3 /* pcm3168a capture */ - >; + usb0_pins: usb0 { + groups = "usb0"; + function = "usb0"; + }; }; &rcar_sound { @@ -328,6 +326,57 @@ }; }; +&scif1 { + pinctrl-0 = <&scif1_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + status = "okay"; +}; + +&sdhi3 { + pinctrl-0 = <&sdhi3_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&wlan_en>; + vqmmc-supply = <&wlan_en>; + bus-width = <4>; + no-1-8-v; + non-removable; + cap-power-off-card; + keep-power-in-suspend; + max-frequency = <26000000>; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1837"; + reg = <2>; + interrupt-parent = <&gpio1>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + }; +}; + +&sound_card { + dais = <&rsnd_port0 /* ak4613 */ + &rsnd_port1 /* HDMI0 */ + &rsnd_port2 /* pcm3168a playback */ + &rsnd_port3 /* pcm3168a capture */ + >; +}; + &ssi4 { shared-pin; }; + +&usb2_phy0 { + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&xhci0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi index e70e1bac2be4..3ef89171538f 100644 --- a/arch/arm64/boot/dts/renesas/ulcb.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi @@ -26,7 +26,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:115200n8"; }; @@ -428,6 +428,11 @@ }; }; +&rwdt { + timeout-sec = <60>; + status = "okay"; +}; + &scif2 { pinctrl-0 = <&scif2_pins>; pinctrl-names = "default"; @@ -478,8 +483,3 @@ status = "okay"; }; - -&rwdt { - timeout-sec = <60>; - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index 5f2687acbf94..1f18a9392d15 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -16,6 +16,11 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-bob.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-kevin.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-scarlet-inx.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-scarlet-kd.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-hugsun-x99.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-khadas-edge.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-khadas-edge-captain.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-khadas-edge-v.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-leez-p710.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopc-t4.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-m4.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-neo4.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts index 5d499c9086fb..bb40c163b05d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts @@ -141,10 +141,12 @@ phy-mode = "rgmii"; pinctrl-names = "default"; pinctrl-0 = <&rgmiim1_pins>; - snps,force_thresh_dma_mode; + snps,aal; snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>; snps,reset-active-low; snps,reset-delays-us = <0 10000 50000>; + snps,rxpbl = <0x4>; + snps,txpbl = <0x4>; tx_delay = <0x24>; rx_delay = <0x18>; status = "okay"; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts index 7cfd5ca6cc85..62936b432f9a 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts @@ -34,10 +34,9 @@ vcc_host_5v: vcc-host-5v-regulator { compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; - pinctrl-0 = <&usb30_host_drv>; + pinctrl-0 = <&usb20_host_drv>; regulator-name = "vcc_host_5v"; regulator-always-on; regulator-boot-on; @@ -320,12 +319,6 @@ rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; - - usb3 { - usb30_host_drv: usb30-host-drv { - rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; }; &sdmmc { diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi index 994468671b19..31cc1541f1f5 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi @@ -278,6 +278,7 @@ }; pd_vpu@RK3328_PD_VPU { reg = <RK3328_PD_VPU>; + clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>; }; }; @@ -407,6 +408,7 @@ compatible = "snps,dw-wdt"; reg = <0x0 0xff1a0000 0x0 0x100>; interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_WDT>; }; pwm0: pwm@ff1b0000 { @@ -595,6 +597,17 @@ status = "disabled"; }; + vpu: video-codec@ff350000 { + compatible = "rockchip,rk3328-vpu"; + reg = <0x0 0xff350000 0x0 0x800>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "vdpu"; + clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>; + clock-names = "aclk", "hclk"; + iommus = <&vpu_mmu>; + power-domains = <&power RK3328_PD_VPU>; + }; + vpu_mmu: iommu@ff350800 { compatible = "rockchip,iommu"; reg = <0x0 0xff350800 0x0 0x40>; @@ -603,7 +616,7 @@ clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>; clock-names = "aclk", "iface"; #iommu-cells = <0>; - status = "disabled"; + power-domains = <&power RK3328_PD_VPU>; }; rkvdec_mmu: iommu@ff360480 { @@ -800,6 +813,7 @@ <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; + max-frequency = <150000000>; status = "disabled"; }; @@ -811,6 +825,7 @@ <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; + max-frequency = <150000000>; status = "disabled"; }; @@ -822,6 +837,7 @@ <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; + max-frequency = <150000000>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts b/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts index 6b059bd7a04f..ebe2ee77ba1f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts @@ -146,6 +146,12 @@ }; }; +&spi1 { + /* On both Low speed and High speed expansion */ + cs-gpios = <0>, <&gpio4 RK_PA6 0>, <&gpio4 RK_PA7 0>; + status = "okay"; +}; + &usbdrd_dwc3_0 { dr_mode = "host"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts index 3e2272b56eb7..e152b0ca0290 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts @@ -43,6 +43,20 @@ backlight = <&backlight>; power-supply = <&pp3300_disp>; + panel-timing { + clock-frequency = <266604720>; + hactive = <2400>; + hfront-porch = <48>; + hback-porch = <84>; + hsync-len = <32>; + hsync-active = <0>; + vactive = <1600>; + vfront-porch = <3>; + vback-porch = <120>; + vsync-len = <10>; + vsync-active = <0>; + }; + port { panel_in_edp: endpoint { remote-endpoint = <&edp_out_panel>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts b/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts new file mode 100644 index 000000000000..0d1f5f9a0de9 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts @@ -0,0 +1,733 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/dts-v1/; +#include <dt-bindings/pwm/pwm.h> +#include <dt-bindings/input/input.h> +#include "rk3399.dtsi" +#include "rk3399-opp.dtsi" + +/ { + model = "Hugsun X99 TV BOX"; + compatible = "hugsun,x99", "rockchip,rk3399"; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + clkin_gmac: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "clkin_gmac"; + #clock-cells = <0>; + }; + + dc_5v: dc-5v { + compatible = "regulator-fixed"; + regulator-name = "dc_5v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vcc_sys: vcc-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <&dc_5v>; + }; + + vcc_phy: vcc-phy-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_phy"; + regulator-always-on; + regulator-boot-on; + }; + + vcc1v8_s0: vcc1v8-s0 { + compatible = "regulator-fixed"; + regulator-name = "vcc1v8_s0"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vcc3v3_sys: vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + vin-supply = <&vcc_sys>; + }; + + vcc5v0_host: vcc5v0-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&host_vbus_drv>; + regulator-name = "vcc5v0_host"; + regulator-always-on; + }; + + vcc5v0_typec: vcc5v0-typec-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_typec_en>; + regulator-name = "vcc5v0_typec"; + regulator-always-on; + vin-supply = <&vcc5v0_usb>; + }; + + vcc5v0_usb: vcc5v0-usb { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_5v>; + }; + + vdd_log: vdd-log { + compatible = "pwm-regulator"; + pwms = <&pwm2 0 25000 1>; + pwm-supply = <&vcc_sys>; + regulator-name = "vdd_log"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_reg_on_h>; + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; + }; + +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_b>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_b>; +}; + +&emmc_phy { + status = "okay"; +}; + +&gmac { + assigned-clocks = <&cru SCLK_RMII_SRC>; + assigned-clock-parents = <&clkin_gmac>; + clock_in_out = "input"; + phy-supply = <&vcc_phy>; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; + tx_delay = <0x28>; + rx_delay = <0x11>; + status = "okay"; +}; + +&gpu { + status = "okay"; + mali-supply = <&vdd_gpu>; +}; + +&hdmi { + ddc-i2c-bus = <&i2c3>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_cec>; + status = "okay"; +}; + +&hdmi_sound { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + i2c-scl-rising-time-ns = <180>; + i2c-scl-falling-time-ns = <30>; + clock-frequency = <400000>; + + vdd_cpu_b: syr827@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + regulator-compatible = "fan53555-reg"; + pinctrl-0 = <&vsel1_gpio>; + regulator-name = "vdd_cpu_b"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + fcs,suspend-voltage-selector = <1>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: syr828@41 { + compatible = "silergy,syr828"; + reg = <0x41>; + regulator-compatible = "fan53555-reg"; + pinctrl-0 = <&vsel2_gpio>; + regulator-name = "vdd_gpu"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + fcs,suspend-voltage-selector = <1>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + regulator-initial-mode = <1>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupt-parent = <&gpio1>; + interrupts = <21 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <1>; + clock-output-names = "xin32k", "rtc_clko_wifi"; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc6-supply = <&vcc_sys>; + vcc7-supply = <&vcc_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc_sys>; + vcc10-supply = <&vcc_sys>; + vcc11-supply = <&vcc_sys>; + vcc12-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc_1v8>; + + regulators { + vdd_center: DCDC_REG1 { + regulator-name = "vdd_center"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-ramp-delay = <6001>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_l: DCDC_REG2 { + regulator-name = "vdd_cpu_l"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG4 { + regulator-name = "vcc_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc1v8_dvp: LDO_REG1 { + regulator-name = "vcc1v8_dvp"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca1v8_hdmi: LDO_REG2 { + regulator-name = "vcca1v8_hdmi"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca_1v8: LDO_REG3 { + regulator-name = "vcca_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_sd: LDO_REG4 { + regulator-name = "vcc_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc3v0_sd: LDO_REG5 { + regulator-name = "vcc3v0_sd"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc_1v5: LDO_REG6 { + regulator-name = "vcc_1v5"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1500000>; + }; + }; + + vcca0v9_hdmi: LDO_REG7 { + regulator-name = "vcca0v9_hdmi"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vcc_3v0: LDO_REG8 { + regulator-name = "vcc_3v0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc3v3_s3: SWITCH_REG1 { + regulator-name = "vcc3v3_s3"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc3v3_s0: SWITCH_REG2 { + regulator-name = "vcc3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + }; + }; +}; + +&i2c1 { + i2c-scl-rising-time-ns = <300>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; +}; + +&i2c3 { + i2c-scl-rising-time-ns = <450>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; +}; + +&i2c4 { + i2c-scl-rising-time-ns = <600>; + i2c-scl-falling-time-ns = <40>; + status = "okay"; + + fusb0: typec-portc@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + interrupt-parent = <&gpio1>; + interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&fusb0_int>; + vbus-supply = <&vcc5v0_typec>; + status = "okay"; + }; +}; + +&i2c7 { + status = "okay"; +}; + +&i2s0 { + rockchip,playback-channels = <8>; + rockchip,capture-channels = <8>; + status = "okay"; +}; + +&i2s1 { + rockchip,playback-channels = <2>; + rockchip,capture-channels = <2>; + status = "okay"; +}; + +&i2s2 { + status = "okay"; +}; + +&io_domains { + status = "okay"; + audio-supply = <&vcc1v8_s0>; + bt656-supply = <&vcc1v8_s0>; + gpio1830-supply = <&vcc_3v0>; + sdmmc-supply = <&vcc_sd>; +}; + +&pmu_io_domains { + status = "okay"; + pmu1830-supply = <&vcc_1v8>; +}; + +&pinctrl { + fusb30x { + fusb0_int: fusb0-int { + rockchip,pins = + <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + gmac { + rgmii_sleep_pins: rgmii-sleep-pins { + rockchip,pins = + <3 RK_PB7 RK_FUNC_GPIO &pcfg_output_low>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = + <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + vsel1_gpio: vsel1-gpio { + rockchip,pins = + <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + vsel2_gpio: vsel2-gpio { + rockchip,pins = + <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + sdio { + bt_host_wake_l: bt-host-wake-l { + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_reg_on_h: bt-reg-on-h { + /* external pullup to VCC1V8_PMUPLL */ + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_wake_l: bt-wake-l { + rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wifi_reg_on_h: wifi-reg_on-h { + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + wifi { + wifi_host_wake_l: wifi-host-wake-l { + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb-typec { + vcc5v0_typec_en: vcc5v0_typec_en { + rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb2 { + host_vbus_drv: host-vbus-drv { + rockchip,pins = + <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm0 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; + pinctrl-0 = <&pwm2_pin_pull_down>; +}; + +&saradc { + vref-supply = <&vcc1v8_s0>; + status = "okay"; +}; + +&sdmmc { + clock-frequency = <150000000>; + clock-freq-min-max = <200000 150000000>; + supports-sd; + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + vqmmc-supply = <&vcc_sd>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; + card-detect-delay = <800>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + supports-emmc; + non-removable; + keep-power-in-suspend; + status = "okay"; +}; + +&sdio0 { + bus-width = <4>; + clock-frequency = <50000000>; + cap-sdio-irq; + cap-sd-highspeed; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; + sd-uhs-sdr104; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + brcmf: wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>; + interrupt-names = "host-wake"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_host_wake_l>; + }; +}; + +&spdif { + status = "okay"; + pinctrl-0 = <&spdif_bus_1>; + #sound-dai-cells = <0>; +}; + +&spi1 { + status = "okay"; + max-freq = <10000000>; + + flash@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + spi-max-frequency = <10000000>; + }; +}; + +&tcphy0 { + status = "okay"; +}; + +&tcphy1 { + status = "okay"; +}; + +&tsadc { + /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-mode = <1>; + /* tshut polarity 0:LOW 1:HIGH */ + rockchip,hw-tshut-polarity = <1>; + rockchip,hw-tshut-temp = <110000>; + status = "okay"; +}; + +&u2phy0 { + status = "okay"; + + u2phy0_host: host-port { + phy-supply = <&vcc5v0_host>; + status = "okay"; + }; + + u2phy0_otg: otg-port { + status = "okay"; + }; +}; + +&u2phy1 { + status = "okay"; + + u2phy1_host: host-port { + phy-supply = <&vcc5v0_host>; + status = "okay"; + }; + + u2phy1_otg: otg-port { + status = "okay"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_rts &uart0_cts>; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; + max-speed = <4000000>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_reg_on_h &bt_host_wake_l &bt_wake_l>; + vbat-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc_1v8>; + }; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usbdrd3_0 { + status = "okay"; +}; + +&usbdrd_dwc3_0 { + status = "okay"; + dr_mode = "otg"; +}; + +&usbdrd3_1 { + status = "okay"; +}; + +&usbdrd_dwc3_1 { + status = "okay"; + dr_mode = "host"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-captain.dts b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-captain.dts new file mode 100644 index 000000000000..8302e51def52 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-captain.dts @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Shenzhen Wesion Technology Co., Ltd. + * (https://www.khadas.com) + */ + +/dts-v1/; +#include "rk3399-khadas-edge.dtsi" + +/ { + model = "Khadas Edge-Captain"; + compatible = "khadas,edge-captain", "rockchip,rk3399"; +}; + +&gmac { + status = "okay"; +}; + +&pcie_phy { + status = "okay"; +}; + +&pcie0 { + ep-gpios = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; + num-lanes = <4>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-v.dts b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-v.dts new file mode 100644 index 000000000000..f5dcb99dc349 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-v.dts @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Shenzhen Wesion Technology Co., Ltd. + * (https://www.khadas.com) + */ + +/dts-v1/; +#include "rk3399-khadas-edge.dtsi" + +/ { + model = "Khadas Edge-V"; + compatible = "khadas,edge-v", "rockchip,rk3399"; +}; + +&gmac { + status = "okay"; +}; + +&pcie_phy { + status = "okay"; +}; + +&pcie0 { + ep-gpios = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; + num-lanes = <4>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dts b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dts new file mode 100644 index 000000000000..31616e7ad89d --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Shenzhen Wesion Technology Co., Ltd. + * (https://www.khadas.com) + */ + +/dts-v1/; +#include "rk3399-khadas-edge.dtsi" + +/ { + model = "Khadas Edge"; + compatible = "khadas,edge", "rockchip,rk3399"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi new file mode 100644 index 000000000000..4944d78a0a1c --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi @@ -0,0 +1,804 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Shenzhen Wesion Technology Co., Ltd. + * (https://www.khadas.com) + */ + +/dts-v1/; +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/pwm/pwm.h> +#include "rk3399.dtsi" +#include "rk3399-opp.dtsi" + +/ { + chosen { + stdout-path = "serial2:1500000n8"; + }; + + clkin_gmac: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "clkin_gmac"; + #clock-cells = <0>; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + + /* + * On the module itself this is one of these (depending + * on the actual card populated): + * - SDIO_RESET_L_WL_REG_ON + * - PDN (power down when low) + */ + reset-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_LOW>; + }; + + /* switched by pmic_sleep */ + vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { + compatible = "regulator-fixed"; + regulator-name = "vcc1v8_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_1v8>; + }; + + vcc3v3_pcie: vcc3v3-pcie-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_pcie"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vsys_3v3>; + }; + + /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */ + vcc5v0_host: vcc5v0-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host_en>; + regulator-name = "vcc5v0_host"; + regulator-always-on; + vin-supply = <&vsys_5v0>; + }; + + vdd_log: vdd-log { + compatible = "pwm-regulator"; + pwms = <&pwm2 0 25000 1>; + regulator-name = "vdd_log"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + vin-supply = <&vsys_3v3>; + }; + + vsys: vsys { + compatible = "regulator-fixed"; + regulator-name = "vsys"; + regulator-always-on; + regulator-boot-on; + }; + + vsys_3v3: vsys-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vsys_3v3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vsys>; + }; + + vsys_5v0: vsys-5v0 { + compatible = "regulator-fixed"; + regulator-name = "vsys_5v0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vsys>; + }; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 1>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + poll-interval = <100>; + + recovery { + label = "Recovery"; + linux,code = <KEY_VENDOR>; + press-threshold-microvolt = <18000>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + pinctrl-names = "default"; + pinctrl-0 = <&pwrbtn>; + + power { + debounce-interval = <100>; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; + label = "GPIO Key Power"; + linux,code = <KEY_POWER>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&sys_led_gpio>, <&user_led_gpio>; + + sys-led { + label = "sys_led"; + linux,default-trigger = "heartbeat"; + gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; + }; + + user-led { + label = "user_led"; + default-state = "off"; + gpios = <&gpio4 RK_PD0 GPIO_ACTIVE_HIGH>; + }; + }; + + fan: pwm-fan { + compatible = "pwm-fan"; + cooling-levels = <0 150 200 255>; + #cooling-cells = <2>; + fan-supply = <&vsys_5v0>; + pwms = <&pwm0 0 40000 0>; + }; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_b>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_b>; +}; + +&cpu_thermal { + trips { + cpu_warm: cpu_warm { + temperature = <55000>; + hysteresis = <2000>; + type = "active"; + }; + + cpu_hot: cpu_hot { + temperature = <65000>; + hysteresis = <2000>; + type = "active"; + }; + }; + + cooling-maps { + map2 { + trip = <&cpu_warm>; + cooling-device = <&fan THERMAL_NO_LIMIT 1>; + }; + + map3 { + trip = <&cpu_hot>; + cooling-device = <&fan 2 THERMAL_NO_LIMIT>; + }; + }; +}; + +&emmc_phy { + status = "okay"; +}; + +&gmac { + assigned-clocks = <&cru SCLK_RMII_SRC>; + assigned-clock-parents = <&clkin_gmac>; + clock_in_out = "input"; + phy-supply = <&vcc_lan>; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; + tx_delay = <0x28>; + rx_delay = <0x11>; +}; + +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&gpu_thermal { + trips { + gpu_warm: gpu_warm { + temperature = <55000>; + hysteresis = <2000>; + type = "active"; + }; + + gpu_hot: gpu_hot { + temperature = <65000>; + hysteresis = <2000>; + type = "active"; + }; + }; + + cooling-maps { + map1 { + trip = <&gpu_warm>; + cooling-device = <&fan THERMAL_NO_LIMIT 1>; + }; + + map2 { + trip = <&gpu_hot>; + cooling-device = <&fan 2 THERMAL_NO_LIMIT>; + }; + }; +}; + +&hdmi { + ddc-i2c-bus = <&i2c3>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_cec>; + status = "okay"; +}; + +&hdmi_sound { + status = "okay"; +}; + +&i2c3 { + i2c-scl-rising-time-ns = <450>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; +}; + +&i2c4 { + clock-frequency = <400000>; + i2c-scl-rising-time-ns = <168>; + i2c-scl-falling-time-ns = <4>; + status = "okay"; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupt-parent = <&gpio1>; + interrupts = <RK_PC6 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk808-clkout2"; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vsys_3v3>; + vcc2-supply = <&vsys_3v3>; + vcc3-supply = <&vsys_3v3>; + vcc4-supply = <&vsys_3v3>; + vcc6-supply = <&vsys_3v3>; + vcc7-supply = <&vsys_3v3>; + vcc8-supply = <&vsys_3v3>; + vcc9-supply = <&vsys_3v3>; + vcc10-supply = <&vsys_3v3>; + vcc11-supply = <&vsys_3v3>; + vcc12-supply = <&vsys_3v3>; + vddio-supply = <&vcc_1v8>; + + regulators { + vdd_center: DCDC_REG1 { + regulator-name = "vdd_center"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_l: DCDC_REG2 { + regulator-name = "vdd_cpu_l"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG4 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc1v8_apio2: LDO_REG1 { + regulator-name = "vcc1v8_apio2"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_vldo2: LDO_REG2 { + regulator-name = "vcc_vldo2"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc1v8_pmupll: LDO_REG3 { + regulator-name = "vcc1v8_pmupll"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vccio_sd: LDO_REG4 { + regulator-name = "vccio_sd"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc_vldo5: LDO_REG5 { + regulator-name = "vcc_vldo5"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v5: LDO_REG6 { + regulator-name = "vcc_1v5"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1500000>; + }; + }; + + vcc1v8_codec: LDO_REG7 { + regulator-name = "vcc1v8_codec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v0: LDO_REG8 { + regulator-name = "vcc_3v0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc3v3_s3: vcc_lan: SWITCH_REG1 { + regulator-name = "vcc3v3_s3"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_s0: SWITCH_REG2 { + regulator-name = "vcc3v3_s0"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + + vdd_cpu_b: regulator@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + fcs,suspend-voltage-selector = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&cpu_b_sleep>; + regulator-name = "vdd_cpu_b"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vsys_3v3>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: regulator@41 { + compatible = "silergy,syr828"; + reg = <0x41>; + fcs,suspend-voltage-selector = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&gpu_sleep>; + regulator-name = "vdd_gpu"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vsys_3v3>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c8 { + clock-frequency = <400000>; + i2c-scl-rising-time-ns = <160>; + i2c-scl-falling-time-ns = <30>; + status = "okay"; +}; + +&i2s0 { + rockchip,playback-channels = <8>; + rockchip,capture-channels = <8>; + status = "okay"; +}; + +&i2s1 { + rockchip,playback-channels = <2>; + rockchip,capture-channels = <2>; + status = "okay"; +}; + +&i2s2 { + status = "okay"; +}; + +&io_domains { + bt656-supply = <&vcc1v8_apio2>; + audio-supply = <&vcc1v8_codec>; + sdmmc-supply = <&vccio_sd>; + gpio1830-supply = <&vcc_3v0>; + status = "okay"; +}; + +&pmu_io_domains { + pmu1830-supply = <&vcc_1v8>; + status = "okay"; +}; + +&pinctrl { + bt { + bt_host_wake_l: bt-host-wake-l { + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_reg_on_h: bt-reg-on-h { + rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_wake_l: bt-wake-l { + rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + buttons { + pwrbtn: pwrbtn { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + leds { + sys_led_gpio: sys_led-gpio { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + user_led_gpio: user_led-gpio { + rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + cpu_b_sleep: cpu-b-sleep { + rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + gpu_sleep: gpu-sleep { + rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb2 { + vcc5v0_host_en: vcc5v0-host-en { + rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + wifi { + wifi_host_wake_l: wifi-host-wake-l { + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm0 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcca1v8_s3>; + status = "okay"; +}; + +&sdio0 { + /* WiFi & BT combo module Ampak AP6356S */ + bus-width = <4>; + cap-sdio-irq; + cap-sd-highspeed; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; + sd-uhs-sdr104; + vqmmc-supply = <&vcc1v8_s3>; + vmmc-supply = <&vccio_sd>; + status = "okay"; + + brcmf: wifi@1 { + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>; + interrupt-names = "host-wake"; + brcm,drive-strength = <5>; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_host_wake_l>; + }; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; + disable-wp; + max-frequency = <150000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + non-removable; + status = "okay"; +}; + +&tcphy0 { + status = "okay"; +}; + +&tcphy1 { + status = "okay"; +}; + +&tsadc { + /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-mode = <1>; + /* tshut polarity 0:LOW 1:HIGH */ + rockchip,hw-tshut-polarity = <1>; + status = "okay"; +}; + +&u2phy0 { + status = "okay"; + + u2phy0_otg: otg-port { + status = "okay"; + }; + + u2phy0_host: host-port { + phy-supply = <&vcc5v0_host>; + status = "okay"; + }; +}; + +&u2phy1 { + status = "okay"; + + u2phy1_otg: otg-port { + status = "okay"; + }; + + u2phy1_host: host-port { + phy-supply = <&vcc5v0_host>; + status = "okay"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_rts &uart0_cts>; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rk808 1>; + clock-names = "lpo"; + device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; + max-speed = <4000000>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_reg_on_h &bt_host_wake_l &bt_wake_l>; + vbat-supply = <&vsys_3v3>; + vddio-supply = <&vcc_1v8>; + }; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usbdrd3_0 { + status = "okay"; +}; + +&usbdrd_dwc3_0 { + status = "okay"; + dr_mode = "otg"; +}; + +&usbdrd3_1 { + status = "okay"; +}; + +&usbdrd_dwc3_1 { + status = "okay"; + dr_mode = "host"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts b/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts new file mode 100644 index 000000000000..73be38a53796 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts @@ -0,0 +1,645 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Andy Yan <andy.yan@gmail.com> + */ + +/dts-v1/; +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/pwm/pwm.h> +#include "rk3399.dtsi" +#include "rk3399-opp.dtsi" + +/ { + model = "Leez RK3399 P710"; + compatible = "leez,p710", "rockchip,rk3399"; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + clkin_gmac: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "clkin_gmac"; + #clock-cells = <0>; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_reg_on_h>; + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; + }; + + dc5v_adp: dc5v-adp { + compatible = "regulator-fixed"; + regulator-name = "dc5v_adapter"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vcc3v3_lan: vcc3v3-lan { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_lan"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vim-supply = <&vcc3v3_sys>; + }; + + vcc3v3_sys: vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_host0: vcc5v0_host1: vcc5v0-host { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_host"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <5500000>; + regulator-max-microvolt = <5500000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_host3: vcc5v0-host3 { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_host3"; + enable-active-high; + gpio = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host3_en>; + regulator-always-on; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_sys: vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc5v_adp>; + }; + + vdd_log: vdd-log { + compatible = "pwm-regulator"; + pwms = <&pwm2 0 25000 1>; + regulator-name = "vdd_log"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_b>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_b>; +}; + +&emmc_phy { + status = "okay"; +}; + +&gmac { + assigned-clocks = <&cru SCLK_RMII_SRC>; + assigned-clock-parents = <&clkin_gmac>; + clock_in_out = "input"; + phy-supply = <&vcc3v3_lan>; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; + tx_delay = <0x28>; + rx_delay = <0x11>; + status = "okay"; +}; + +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c7>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_cec>; + status = "okay"; +}; + +&hdmi_sound { + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + i2c-scl-rising-time-ns = <168>; + i2c-scl-falling-time-ns = <4>; + status = "okay"; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupt-parent = <&gpio1>; + interrupts = <21 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk808-clkout2"; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc5v0_sys>; + vcc12-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc_1v8>; + + regulators { + vdd_center: DCDC_REG1 { + regulator-name = "vdd_center"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_l: DCDC_REG2 { + regulator-name = "vdd_cpu_l"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG4 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc1v8_dvp: LDO_REG1 { + regulator-name = "vcc1v8_dvp"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc1v8_hdmi: LDO_REG2 { + regulator-name = "vcc1v8_hdmi"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca_1v8: LDO_REG3 { + regulator-name = "vcca_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vccio_sd: LDO_REG4 { + regulator-name = "vccio_sd"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcca3v0_codec: LDO_REG5 { + regulator-name = "vcca3v0_codec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v5: LDO_REG6 { + regulator-name = "vcc_1v5"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1500000>; + }; + }; + + vcc0v9_hdmi: LDO_REG7 { + regulator-name = "vcc0v9_hdmi"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v0: LDO_REG8 { + regulator-name = "vcc_3v0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + }; + }; + + vdd_cpu_b: regulator@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + fcs,suspend-voltage-selector = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&vsel1_gpio>; + regulator-name = "vdd_cpu_b"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: regulator@41 { + compatible = "silergy,syr828"; + reg = <0x41>; + fcs,suspend-voltage-selector = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&vsel2_gpio>; + regulator-name = "vdd_gpu"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c1 { + i2c-scl-rising-time-ns = <300>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; +}; + +&i2c3 { + i2c-scl-rising-time-ns = <450>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; +}; + +&i2c4 { + i2c-scl-rising-time-ns = <600>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; +}; + +&i2c7 { + status = "okay"; +}; + +&i2s0 { + rockchip,playback-channels = <8>; + rockchip,capture-channels = <8>; + status = "okay"; +}; + +&i2s1 { + rockchip,playback-channels = <2>; + rockchip,capture-channels = <2>; + status = "okay"; +}; + +&i2s2 { + status = "okay"; +}; + +&io_domains { + status = "okay"; + + bt656-supply = <&vcc1v8_dvp>; + audio-supply = <&vcc_1v8>; + sdmmc-supply = <&vccio_sd>; + gpio1830-supply = <&vcc_3v0>; +}; + +&pmu_io_domains { + status = "okay"; + pmu1830-supply = <&vcc_3v0>; +}; + +&pinctrl { + bt { + bt_reg_on_h: bt-reg-on-h { + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_host_wake_l: bt-host-wake-l { + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_wake_l: bt-wake-l { + rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + vsel1_gpio: vsel1-gpio { + rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + vsel2_gpio: vsel2-gpio { + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + usb2 { + vcc5v0_host3_en: vcc5v0-host3-en { + rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + wifi { + wifi_reg_on_h: wifi-reg-on-h { + rockchip,pins = + <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wifi_host_wake_l: wifi-host-wake-l { + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm2 { + status = "okay"; +}; + +&saradc { + status = "okay"; + + vref-supply = <&vcc_1v8>; +}; + +&sdio0 { + #address-cells = <1>; + #size-cells = <0>; + bus-width = <4>; + clock-frequency = <50000000>; + cap-sdio-irq; + cap-sd-highspeed; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; + sd-uhs-sdr104; + status = "okay"; + + brcmf: wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>; + interrupt-names = "host-wake"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_host_wake_l>; + }; +}; + +&sdhci { + bus-width = <8>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + non-removable; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; + disable-wp; + max-frequency = <150000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cd &sdmmc_cmd &sdmmc_bus4>; + status = "okay"; +}; + +&tcphy0 { + status = "okay"; +}; + +&tcphy1 { + status = "okay"; +}; + +&tsadc { + status = "okay"; + + /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-mode = <1>; + /* tshut polarity 0:LOW 1:HIGH */ + rockchip,hw-tshut-polarity = <1>; +}; + +&u2phy0 { + status = "okay"; + + u2phy0_otg: otg-port { + status = "okay"; + }; + + u2phy0_host: host-port { + phy-supply = <&vcc5v0_host0>; + status = "okay"; + }; +}; + +&u2phy1 { + status = "okay"; + + u2phy1_otg: otg-port { + status = "okay"; + }; + + u2phy1_host: host-port { + phy-supply = <&vcc5v0_host1>; + status = "okay"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_reg_on_h>; + }; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usbdrd3_0 { + status = "okay"; +}; + +&usbdrd_dwc3_0 { + status = "okay"; + dr_mode = "otg"; +}; + +&usbdrd3_1 { + status = "okay"; +}; + +&usbdrd_dwc3_1 { + status = "okay"; + dr_mode = "host"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts index e030627159c6..1ae1ebd4efdd 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts @@ -25,6 +25,15 @@ #clock-cells = <0>; }; + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; + }; + vcc12v_dcin: dc-12v { compatible = "regulator-fixed"; regulator-name = "vcc12v_dcin"; @@ -169,6 +178,10 @@ status = "okay"; }; +&hdmi_sound { + status = "okay"; +}; + &i2c0 { clock-frequency = <400000>; i2c-scl-rising-time-ns = <168>; @@ -451,12 +464,46 @@ }; &pinctrl { + bt { + bt_enable_h: bt-enable-h { + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_host_wake_l: bt-host-wake-l { + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_wake_l: bt-wake-l { + rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pcie { pcie_pwr_en: pcie-pwr-en { rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; + sdio0 { + sdio0_bus4: sdio0-bus4 { + rockchip,pins = + <2 20 RK_FUNC_1 &pcfg_pull_up_20ma>, + <2 21 RK_FUNC_1 &pcfg_pull_up_20ma>, + <2 22 RK_FUNC_1 &pcfg_pull_up_20ma>, + <2 23 RK_FUNC_1 &pcfg_pull_up_20ma>; + }; + + sdio0_cmd: sdio0-cmd { + rockchip,pins = + <2 24 RK_FUNC_1 &pcfg_pull_up_20ma>; + }; + + sdio0_clk: sdio0-clk { + rockchip,pins = + <2 25 RK_FUNC_1 &pcfg_pull_none_20ma>; + }; + }; + pmic { pmic_int_l: pmic-int-l { rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; @@ -482,6 +529,17 @@ rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; }; }; + + wifi { + wifi_enable_h: wifi-enable-h { + rockchip,pins = + <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wifi_host_wake_l: wifi-host-wake-l { + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; }; &pwm2 { @@ -494,6 +552,32 @@ vref-supply = <&vcc_1v8>; }; +&sdio0 { + #address-cells = <1>; + #size-cells = <0>; + bus-width = <4>; + clock-frequency = <50000000>; + cap-sdio-irq; + cap-sd-highspeed; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; + sd-uhs-sdr104; + status = "okay"; + + brcmf: wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>; + interrupt-names = "host-wake"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_host_wake_l>; + }; +}; + &sdmmc { bus-width = <4>; cap-mmc-highspeed; @@ -557,6 +641,23 @@ }; }; +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; + }; +}; + &uart2 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dts index 12285c51cceb..437a75f31ad4 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dts @@ -114,6 +114,55 @@ }; }; +&spi0 { + /* On Low speed expansion (LS-SPI0) */ + status = "okay"; +}; + +&spi4 { + /* On High speed expansion (HS-SPI1) */ + status = "okay"; +}; + +&thermal_zones { + cpu_thermal: cpu { + polling-delay-passive = <100>; + polling-delay = <1000>; + thermal-sensors = <&tsadc 0>; + sustainable-power = <1550>; + + trips { + cpu_alert0: cpu_alert0 { + temperature = <65000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_alert1: cpu_alert1 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit: cpu_crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + + trip = <&cpu_alert1>; + cooling-device = + <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; +}; + &usbdrd_dwc3_0 { dr_mode = "otg"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts index 20ec7d1c25d7..0401d4ec1f45 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts @@ -58,6 +58,13 @@ }; }; + fan: pwm-fan { + compatible = "pwm-fan"; + #cooling-cells = <2>; + fan-supply = <&vcc12v_dcin>; + pwms = <&pwm1 0 50000 0>; + }; + sdio_pwrseq: sdio-pwrseq { compatible = "mmc-pwrseq-simple"; clocks = <&rk808 1>; @@ -513,6 +520,20 @@ gpio1830-supply = <&vcc_3v0>; }; +&pcie0 { + ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; + num-lanes = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_perst>; + vpcie12v-supply = <&vcc12v_dcin>; + vpcie3v3-supply = <&vcc3v3_pcie>; + status = "okay"; +}; + +&pcie_phy { + status = "okay"; +}; + &pmu_io_domains { pmu1830-supply = <&vcc_3v0>; status = "okay"; @@ -542,6 +563,10 @@ }; pcie { + pcie_perst: pcie-perst { + rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + pcie_pwr_en: pcie-pwr-en { rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; }; @@ -584,6 +609,10 @@ status = "okay"; }; +&pwm1 { + status = "okay"; +}; + &pwm2 { status = "okay"; }; @@ -613,6 +642,16 @@ status = "okay"; }; +&spi1 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + }; +}; + &tcphy0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi index 04623e52ac5d..1bc1579674e5 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi @@ -565,12 +565,11 @@ status = "okay"; u2phy0_otg: otg-port { - phy-supply = <&vcc5v0_typec0>; status = "okay"; }; u2phy0_host: host-port { - phy-supply = <&vcc5v0_host>; + phy-supply = <&vcc5v0_typec0>; status = "okay"; }; }; @@ -620,7 +619,7 @@ &usbdrd_dwc3_0 { status = "okay"; - dr_mode = "otg"; + dr_mode = "host"; }; &usbdrd3_1 { diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index 196ac9b78076..cede1ad81be2 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -414,6 +414,9 @@ compatible = "snps,dwc3"; reg = <0x0 0xfe800000 0x0 0x100000>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru SCLK_USB3OTG0_REF>, <&cru ACLK_USB3OTG0>, + <&cru SCLK_USB3OTG0_SUSPEND>; + clock-names = "ref", "bus_early", "suspend"; dr_mode = "otg"; phys = <&u2phy0_otg>, <&tcphy0_usb3>; phy-names = "usb2-phy", "usb3-phy"; @@ -447,6 +450,9 @@ compatible = "snps,dwc3"; reg = <0x0 0xfe900000 0x0 0x100000>; interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru SCLK_USB3OTG1_REF>, <&cru ACLK_USB3OTG1>, + <&cru SCLK_USB3OTG1_SUSPEND>; + clock-names = "ref", "bus_early", "suspend"; dr_mode = "otg"; phys = <&u2phy1_otg>, <&tcphy1_usb3>; phy-names = "usb2-phy", "usb3-phy"; @@ -821,15 +827,6 @@ type = "critical"; }; }; - - cooling-maps { - map0 { - trip = <&gpu_alert0>; - cooling-device = - <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; }; }; @@ -1706,11 +1703,11 @@ reg = <0x0 0xff914000 0x0 0x100>, <0x0 0xff915000 0x0 0x100>; interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>; interrupt-names = "isp0_mmu"; - clocks = <&cru ACLK_ISP0_NOC>, <&cru HCLK_ISP0_NOC>; + clocks = <&cru ACLK_ISP0_WRAPPER>, <&cru HCLK_ISP0_WRAPPER>; clock-names = "aclk", "iface"; #iommu-cells = <0>; + power-domains = <&power RK3399_PD_ISP0>; rockchip,disable-mmu-reset; - status = "disabled"; }; isp1_mmu: iommu@ff924000 { @@ -1718,11 +1715,11 @@ reg = <0x0 0xff924000 0x0 0x100>, <0x0 0xff925000 0x0 0x100>; interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH 0>; interrupt-names = "isp1_mmu"; - clocks = <&cru ACLK_ISP1_NOC>, <&cru HCLK_ISP1_NOC>; + clocks = <&cru ACLK_ISP1_WRAPPER>, <&cru HCLK_ISP1_WRAPPER>; clock-names = "aclk", "iface"; #iommu-cells = <0>; + power-domains = <&power RK3399_PD_ISP1>; rockchip,disable-mmu-reset; - status = "disabled"; }; hdmi_sound: hdmi-sound { diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro.dtsi b/arch/arm64/boot/dts/rockchip/rk3399pro.dtsi new file mode 100644 index 000000000000..bb5ebf6608b9 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399pro.dtsi @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd. + +#include "rk3399.dtsi" + +/ { + compatible = "rockchip,rk3399pro"; +}; + +/* Default to enabled since AP talk to NPU part over pcie */ +&pcie_phy { + status = "okay"; +}; + +/* Default to enabled since AP talk to NPU part over pcie */ +&pcie0 { + ep-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; + num-lanes = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_clkreqn_cpm>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts b/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts index 7968d524351b..f72f048a0c9d 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts @@ -163,4 +163,8 @@ &nand { status = "okay"; + + nand@0 { + reg = <0>; + }; }; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi index a3cd475b48d2..8ec40a0b8b1e 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi @@ -8,8 +8,6 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/gpio/uniphier-gpio.h> -/memreserve/ 0x80000000 0x02000000; - / { compatible = "socionext,uniphier-ld11"; #address-cells = <2>; @@ -110,6 +108,17 @@ <1 10 4>; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + secure-memory@81000000 { + reg = <0x0 0x81000000 0x0 0x01000000>; + no-map; + }; + }; + soc@0 { compatible = "simple-bus"; #address-cells = <1>; @@ -617,6 +626,8 @@ status = "disabled"; reg-names = "nand_data", "denali_reg"; reg = <0x68000000 0x20>, <0x68100000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <0 65 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi index 017f6328c191..b658f2b641e2 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi @@ -9,8 +9,6 @@ #include <dt-bindings/gpio/uniphier-gpio.h> #include <dt-bindings/thermal/thermal.h> -/memreserve/ 0x80000000 0x02000000; - / { compatible = "socionext,uniphier-ld20"; #address-cells = <2>; @@ -215,6 +213,17 @@ }; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + secure-memory@81000000 { + reg = <0x0 0x81000000 0x0 0x01000000>; + no-map; + }; + }; + soc@0 { compatible = "simple-bus"; #address-cells = <1>; @@ -921,6 +930,8 @@ status = "disabled"; reg-names = "nand_data", "denali_reg"; reg = <0x68000000 0x20>, <0x68100000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <0 65 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts index 1965e4dfe4a4..754315bbd1c8 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts @@ -115,4 +115,8 @@ &nand { status = "okay"; + + nand@0 { + reg = <0>; + }; }; diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi index bb97abe1a55f..d6f6cee4d549 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi @@ -8,8 +8,6 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/gpio/uniphier-gpio.h> -/memreserve/ 0x80000000 0x02000000; - / { compatible = "socionext,uniphier-pxs3"; #address-cells = <2>; @@ -138,6 +136,17 @@ <1 10 4>; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + secure-memory@81000000 { + reg = <0x0 0x81000000 0x0 0x01000000>; + no-map; + }; + }; + soc@0 { compatible = "simple-bus"; #address-cells = <1>; @@ -779,6 +788,8 @@ status = "disabled"; reg-names = "nand_data", "denali_reg"; reg = <0x68000000 0x20>, <0x68100000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <0 65 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; diff --git a/arch/arm64/boot/dts/sprd/sc9836.dtsi b/arch/arm64/boot/dts/sprd/sc9836.dtsi index 286d7173f94f..231436be0e3f 100644 --- a/arch/arm64/boot/dts/sprd/sc9836.dtsi +++ b/arch/arm64/boot/dts/sprd/sc9836.dtsi @@ -60,7 +60,7 @@ }; funnel@10001000 { - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0x10001000 0 0x1000>; clocks = <&clk26mhz>; clock-names = "apb_pclk"; diff --git a/arch/arm64/boot/dts/sprd/sc9860.dtsi b/arch/arm64/boot/dts/sprd/sc9860.dtsi index b25d19977170..e27eb3ed1d47 100644 --- a/arch/arm64/boot/dts/sprd/sc9860.dtsi +++ b/arch/arm64/boot/dts/sprd/sc9860.dtsi @@ -300,7 +300,7 @@ }; funnel@10001000 { /* SoC Funnel */ - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0x10001000 0 0x1000>; clocks = <&ext_26m>; clock-names = "apb_pclk"; @@ -367,7 +367,7 @@ }; funnel@11001000 { /* Cluster0 Funnel */ - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0x11001000 0 0x1000>; clocks = <&ext_26m>; clock-names = "apb_pclk"; @@ -415,7 +415,7 @@ }; funnel@11002000 { /* Cluster1 Funnel */ - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0x11002000 0 0x1000>; clocks = <&ext_26m>; clock-names = "apb_pclk"; @@ -513,7 +513,7 @@ }; funnel@11005000 { /* Main Funnel */ - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0x11005000 0 0x1000>; clocks = <&ext_26m>; clock-names = "apb_pclk"; diff --git a/arch/arm64/boot/dts/sprd/whale2.dtsi b/arch/arm64/boot/dts/sprd/whale2.dtsi index 4bb862c6b083..79b9591c37aa 100644 --- a/arch/arm64/boot/dts/sprd/whale2.dtsi +++ b/arch/arm64/boot/dts/sprd/whale2.dtsi @@ -130,6 +130,34 @@ clock-names = "enable"; clocks = <&apahb_gate CLK_DMA_EB>; }; + + sdio3: sdio@50430000 { + compatible = "sprd,sdhci-r11"; + reg = <0 0x50430000 0 0x1000>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + + clock-names = "sdio", "enable", "2x_enable"; + clocks = <&aon_prediv CLK_EMMC_2X>, + <&apahb_gate CLK_EMMC_EB>, + <&aon_gate CLK_EMMC_2X_EN>; + assigned-clocks = <&aon_prediv CLK_EMMC_2X>; + assigned-clock-parents = <&clk_l0_409m6>; + + sprd,phy-delay-mmc-hs400 = <0x44 0x7f 0x2e 0x2e>; + sprd,phy-delay-mmc-hs200 = <0x0 0x8c 0x8c 0x8c>; + sprd,phy-delay-mmc-ddr52 = <0x3f 0x75 0x14 0x14>; + sprd,phy-delay-mmc-hs400es = <0x3f 0x3f 0x2e 0x2e>; + vmmc-supply = <&vddemmccore>; + bus-width = <8>; + non-removable; + no-sdio; + no-sd; + cap-mmc-hw-reset; + mmc-hs400-enhanced-strobe; + mmc-hs400-1_8v; + mmc-hs200-1_8v; + mmc-ddr-1_8v; + }; }; aon { @@ -272,4 +300,11 @@ clock-frequency = <100000000>; clock-output-names = "ext-rco-100m"; }; + + clk_l0_409m6: clk_l0_409m6 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <409600000>; + clock-output-names = "ext-409m6"; + }; }; diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile index 63e619d0b5b8..b397945fdf73 100644 --- a/arch/arm64/boot/dts/ti/Makefile +++ b/arch/arm64/boot/dts/ti/Makefile @@ -7,3 +7,5 @@ # dtb-$(CONFIG_ARCH_K3_AM6_SOC) += k3-am654-base-board.dtb + +dtb-$(CONFIG_ARCH_K3_J721E_SOC) += k3-j721e-common-proc-board.dtb diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi index 752455269fab..799c75fa7981 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi @@ -4,6 +4,7 @@ * * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/ */ +#include <dt-bindings/phy/phy-am654-serdes.h> &cbass_main { msmc_ram: sram@70000000 { @@ -41,9 +42,10 @@ */ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; - gic_its: gic-its@18200000 { + gic_its: gic-its@1820000 { compatible = "arm,gic-v3-its"; reg = <0x00 0x01820000 0x00 0x10000>; + socionext,synquacer-pre-its = <0x1000000 0x400000>; msi-controller; #msi-cells = <1>; }; @@ -60,6 +62,36 @@ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; }; + serdes0: serdes@900000 { + compatible = "ti,phy-am654-serdes"; + reg = <0x0 0x900000 0x0 0x2000>; + reg-names = "serdes"; + #phy-cells = <2>; + power-domains = <&k3_pds 153 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 153 4>, <&k3_clks 153 1>, <&serdes1 AM654_SERDES_LO_REFCLK>; + clock-output-names = "serdes0_cmu_refclk", "serdes0_lo_refclk", "serdes0_ro_refclk"; + assigned-clocks = <&k3_clks 153 4>, <&serdes0 AM654_SERDES_CMU_REFCLK>; + assigned-clock-parents = <&k3_clks 153 8>, <&k3_clks 153 4>; + ti,serdes-clk = <&serdes0_clk>; + #clock-cells = <1>; + mux-controls = <&serdes_mux 0>; + }; + + serdes1: serdes@910000 { + compatible = "ti,phy-am654-serdes"; + reg = <0x0 0x910000 0x0 0x2000>; + reg-names = "serdes"; + #phy-cells = <2>; + power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>; + clocks = <&serdes0 AM654_SERDES_RO_REFCLK>, <&k3_clks 154 1>, <&k3_clks 154 5>; + clock-output-names = "serdes1_cmu_refclk", "serdes1_lo_refclk", "serdes1_ro_refclk"; + assigned-clocks = <&k3_clks 154 5>, <&serdes1 AM654_SERDES_CMU_REFCLK>; + assigned-clock-parents = <&k3_clks 154 9>, <&k3_clks 154 5>; + ti,serdes-clk = <&serdes1_clk>; + #clock-cells = <1>; + mux-controls = <&serdes_mux 1>; + }; + main_uart0: serial@2800000 { compatible = "ti,am654-uart"; reg = <0x00 0x02800000 0x00 0x100>; @@ -68,7 +100,7 @@ interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; current-speed = <115200>; - power-domains = <&k3_pds 146>; + power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>; }; main_uart1: serial@2810000 { @@ -78,7 +110,7 @@ reg-io-width = <4>; interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; - power-domains = <&k3_pds 147>; + power-domains = <&k3_pds 147 TI_SCI_PD_EXCLUSIVE>; }; main_uart2: serial@2820000 { @@ -88,7 +120,7 @@ reg-io-width = <4>; interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; - power-domains = <&k3_pds 148>; + power-domains = <&k3_pds 148 TI_SCI_PD_EXCLUSIVE>; }; main_pmx0: pinmux@11c000 { @@ -115,7 +147,7 @@ #size-cells = <0>; clock-names = "fck"; clocks = <&k3_clks 110 1>; - power-domains = <&k3_pds 110>; + power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>; }; main_i2c1: i2c@2010000 { @@ -126,7 +158,7 @@ #size-cells = <0>; clock-names = "fck"; clocks = <&k3_clks 111 1>; - power-domains = <&k3_pds 111>; + power-domains = <&k3_pds 111 TI_SCI_PD_EXCLUSIVE>; }; main_i2c2: i2c@2020000 { @@ -137,7 +169,7 @@ #size-cells = <0>; clock-names = "fck"; clocks = <&k3_clks 112 1>; - power-domains = <&k3_pds 112>; + power-domains = <&k3_pds 112 TI_SCI_PD_EXCLUSIVE>; }; main_i2c3: i2c@2030000 { @@ -148,14 +180,14 @@ #size-cells = <0>; clock-names = "fck"; clocks = <&k3_clks 113 1>; - power-domains = <&k3_pds 113>; + power-domains = <&k3_pds 113 TI_SCI_PD_EXCLUSIVE>; }; ecap0: pwm@3100000 { compatible = "ti,am654-ecap", "ti,am3352-ecap"; #pwm-cells = <3>; reg = <0x0 0x03100000 0x0 0x60>; - power-domains = <&k3_pds 39>; + power-domains = <&k3_pds 39 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 39 0>; clock-names = "fck"; }; @@ -165,7 +197,7 @@ reg = <0x0 0x2100000 0x0 0x400>; interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; clocks = <&k3_clks 137 1>; - power-domains = <&k3_pds 137>; + power-domains = <&k3_pds 137 TI_SCI_PD_EXCLUSIVE>; #address-cells = <1>; #size-cells = <0>; }; @@ -175,7 +207,7 @@ reg = <0x0 0x2110000 0x0 0x400>; interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>; clocks = <&k3_clks 138 1>; - power-domains = <&k3_pds 138>; + power-domains = <&k3_pds 138 TI_SCI_PD_EXCLUSIVE>; #address-cells = <1>; #size-cells = <0>; assigned-clocks = <&k3_clks 137 1>; @@ -187,7 +219,7 @@ reg = <0x0 0x2120000 0x0 0x400>; interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; clocks = <&k3_clks 139 1>; - power-domains = <&k3_pds 139>; + power-domains = <&k3_pds 139 TI_SCI_PD_EXCLUSIVE>; #address-cells = <1>; #size-cells = <0>; }; @@ -197,7 +229,7 @@ reg = <0x0 0x2130000 0x0 0x400>; interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; clocks = <&k3_clks 140 1>; - power-domains = <&k3_pds 140>; + power-domains = <&k3_pds 140 TI_SCI_PD_EXCLUSIVE>; #address-cells = <1>; #size-cells = <0>; }; @@ -207,7 +239,7 @@ reg = <0x0 0x2140000 0x0 0x400>; interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; clocks = <&k3_clks 141 1>; - power-domains = <&k3_pds 141>; + power-domains = <&k3_pds 141 TI_SCI_PD_EXCLUSIVE>; #address-cells = <1>; #size-cells = <0>; }; @@ -215,7 +247,7 @@ sdhci0: sdhci@4f80000 { compatible = "ti,am654-sdhci-5.1"; reg = <0x0 0x4f80000 0x0 0x260>, <0x0 0x4f90000 0x0 0x134>; - power-domains = <&k3_pds 47>; + power-domains = <&k3_pds 47 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 47 0>, <&k3_clks 47 1>; clock-names = "clk_ahb", "clk_xin"; interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; @@ -232,6 +264,38 @@ #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x0 0x00100000 0x1c000>; + + pcie0_mode: pcie-mode@4060 { + compatible = "syscon"; + reg = <0x00004060 0x4>; + }; + + pcie1_mode: pcie-mode@4070 { + compatible = "syscon"; + reg = <0x00004070 0x4>; + }; + + pcie_devid: pcie-devid@210 { + compatible = "syscon"; + reg = <0x00000210 0x4>; + }; + + serdes0_clk: serdes_clk@4080 { + compatible = "syscon"; + reg = <0x00004080 0x4>; + }; + + serdes1_clk: serdes_clk@4090 { + compatible = "syscon"; + reg = <0x00004090 0x4>; + }; + + serdes_mux: mux-controller { + compatible = "mmio-mux"; + #mux-control-cells = <1>; + mux-reg-masks = <0x4080 0x3>, /* SERDES0 lane select */ + <0x4090 0x3>; /* SERDES1 lane select */ + }; }; dwc3_0: dwc3@4000000 { @@ -242,7 +306,7 @@ ranges = <0x0 0x0 0x4000000 0x20000>; interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; dma-coherent; - power-domains = <&k3_pds 151>; + power-domains = <&k3_pds 151 TI_SCI_PD_EXCLUSIVE>; assigned-clocks = <&k3_clks 151 2>, <&k3_clks 151 7>; assigned-clock-parents = <&k3_clks 151 4>, /* set REF_CLK to 20MHz i.e. PER0_PLL/48 */ <&k3_clks 151 9>; /* set PIPE3_TXB_CLK to CLK_12M_RC/256 (for HS only) */ @@ -281,7 +345,7 @@ ranges = <0x0 0x0 0x4020000 0x20000>; interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; dma-coherent; - power-domains = <&k3_pds 152>; + power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>; assigned-clocks = <&k3_clks 152 2>; assigned-clock-parents = <&k3_clks 152 4>; /* set REF_CLK to 20MHz i.e. PER0_PLL/48 */ @@ -309,4 +373,147 @@ clock-names = "wkupclk", "refclk"; #phy-cells = <0>; }; + + intr_main_gpio: interrupt-controller0 { + compatible = "ti,sci-intr"; + ti,intr-trigger-type = <1>; + interrupt-controller; + interrupt-parent = <&gic500>; + #interrupt-cells = <2>; + ti,sci = <&dmsc>; + ti,sci-dst-id = <56>; + ti,sci-rm-range-girq = <0x1>; + }; + + cbass_main_navss: interconnect0 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + intr_main_navss: interrupt-controller1 { + compatible = "ti,sci-intr"; + ti,intr-trigger-type = <4>; + interrupt-controller; + interrupt-parent = <&gic500>; + #interrupt-cells = <2>; + ti,sci = <&dmsc>; + ti,sci-dst-id = <56>; + ti,sci-rm-range-girq = <0x0>, <0x2>; + }; + + inta_main_udmass: interrupt-controller@33d00000 { + compatible = "ti,sci-inta"; + reg = <0x0 0x33d00000 0x0 0x100000>; + interrupt-controller; + interrupt-parent = <&intr_main_navss>; + msi-controller; + ti,sci = <&dmsc>; + ti,sci-dev-id = <179>; + ti,sci-rm-range-vint = <0x0>; + ti,sci-rm-range-global-event = <0x1>; + }; + + hwspinlock: spinlock@30e00000 { + compatible = "ti,am654-hwspinlock"; + reg = <0x00 0x30e00000 0x00 0x1000>; + #hwlock-cells = <1>; + }; + }; + + main_gpio0: main_gpio0@600000 { + compatible = "ti,am654-gpio", "ti,keystone-gpio"; + reg = <0x0 0x600000 0x0 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&intr_main_gpio>; + interrupts = <57 256>, <57 257>, <57 258>, <57 259>, <57 260>, + <57 261>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <96>; + ti,davinci-gpio-unbanked = <0>; + clocks = <&k3_clks 57 0>; + clock-names = "gpio"; + }; + + main_gpio1: main_gpio1@601000 { + compatible = "ti,am654-gpio", "ti,keystone-gpio"; + reg = <0x0 0x601000 0x0 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&intr_main_gpio>; + interrupts = <58 256>, <58 257>, <58 258>, <58 259>, <58 260>, + <58 261>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <90>; + ti,davinci-gpio-unbanked = <0>; + clocks = <&k3_clks 58 0>; + clock-names = "gpio"; + }; + + pcie0_rc: pcie@5500000 { + compatible = "ti,am654-pcie-rc"; + reg = <0x0 0x5500000 0x0 0x1000>, <0x0 0x5501000 0x0 0x1000>, <0x0 0x10000000 0x0 0x2000>, <0x0 0x5506000 0x0 0x1000>; + reg-names = "app", "dbics", "config", "atu"; + power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x81000000 0 0 0x0 0x10020000 0 0x00010000 + 0x82000000 0 0x10030000 0x0 0x10030000 0 0x07FD0000>; + ti,syscon-pcie-id = <&pcie_devid>; + ti,syscon-pcie-mode = <&pcie0_mode>; + bus-range = <0x0 0xff>; + num-viewport = <16>; + max-link-speed = <3>; + dma-coherent; + interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>; + msi-map = <0x0 &gic_its 0x0 0x10000>; + }; + + pcie0_ep: pcie-ep@5500000 { + compatible = "ti,am654-pcie-ep"; + reg = <0x0 0x5500000 0x0 0x1000>, <0x0 0x5501000 0x0 0x1000>, <0x0 0x10000000 0x0 0x8000000>, <0x0 0x5506000 0x0 0x1000>; + reg-names = "app", "dbics", "addr_space", "atu"; + power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>; + ti,syscon-pcie-mode = <&pcie0_mode>; + num-ib-windows = <16>; + num-ob-windows = <16>; + max-link-speed = <3>; + dma-coherent; + interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>; + }; + + pcie1_rc: pcie@5600000 { + compatible = "ti,am654-pcie-rc"; + reg = <0x0 0x5600000 0x0 0x1000>, <0x0 0x5601000 0x0 0x1000>, <0x0 0x18000000 0x0 0x2000>, <0x0 0x5606000 0x0 0x1000>; + reg-names = "app", "dbics", "config", "atu"; + power-domains = <&k3_pds 121 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x81000000 0 0 0x0 0x18020000 0 0x00010000 + 0x82000000 0 0x18030000 0x0 0x18030000 0 0x07FD0000>; + ti,syscon-pcie-id = <&pcie_devid>; + ti,syscon-pcie-mode = <&pcie1_mode>; + bus-range = <0x0 0xff>; + num-viewport = <16>; + max-link-speed = <3>; + dma-coherent; + interrupts = <GIC_SPI 355 IRQ_TYPE_EDGE_RISING>; + msi-map = <0x0 &gic_its 0x10000 0x10000>; + }; + + pcie1_ep: pcie-ep@5600000 { + compatible = "ti,am654-pcie-ep"; + reg = <0x0 0x5600000 0x0 0x1000>, <0x0 0x5601000 0x0 0x1000>, <0x0 0x18000000 0x0 0x4000000>, <0x0 0x5606000 0x0 0x1000>; + reg-names = "app", "dbics", "addr_space", "atu"; + power-domains = <&k3_pds 121 TI_SCI_PD_EXCLUSIVE>; + ti,syscon-pcie-mode = <&pcie1_mode>; + num-ib-windows = <16>; + num-ob-windows = <16>; + max-link-speed = <3>; + dma-coherent; + interrupts = <GIC_SPI 355 IRQ_TYPE_EDGE_RISING>; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi index 6f7d2b316ded..7bdf5342f58f 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi @@ -14,7 +14,15 @@ interrupts = <GIC_SPI 565 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <96000000>; current-speed = <115200>; - power-domains = <&k3_pds 149>; + power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>; + }; + + mcu_ram: sram@41c00000 { + compatible = "mmio-sram"; + reg = <0x00 0x41c00000 0x00 0x80000>; + ranges = <0x0 0x00 0x41c00000 0x80000>; + #address-cells = <1>; + #size-cells = <1>; }; mcu_i2c0: i2c@40b00000 { @@ -25,7 +33,7 @@ #size-cells = <0>; clock-names = "fck"; clocks = <&k3_clks 114 1>; - power-domains = <&k3_pds 114>; + power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>; }; mcu_spi0: spi@40300000 { @@ -33,7 +41,7 @@ reg = <0x0 0x40300000 0x0 0x400>; interrupts = <GIC_SPI 560 IRQ_TYPE_LEVEL_HIGH>; clocks = <&k3_clks 142 1>; - power-domains = <&k3_pds 142>; + power-domains = <&k3_pds 142 TI_SCI_PD_EXCLUSIVE>; #address-cells = <1>; #size-cells = <0>; }; @@ -43,7 +51,7 @@ reg = <0x0 0x40310000 0x0 0x400>; interrupts = <GIC_SPI 561 IRQ_TYPE_LEVEL_HIGH>; clocks = <&k3_clks 143 1>; - power-domains = <&k3_pds 143>; + power-domains = <&k3_pds 143 TI_SCI_PD_EXCLUSIVE>; #address-cells = <1>; #size-cells = <0>; }; @@ -53,7 +61,7 @@ reg = <0x0 0x40320000 0x0 0x400>; interrupts = <GIC_SPI 562 IRQ_TYPE_LEVEL_HIGH>; clocks = <&k3_clks 144 1>; - power-domains = <&k3_pds 144>; + power-domains = <&k3_pds 144 TI_SCI_PD_EXCLUSIVE>; #address-cells = <1>; #size-cells = <0>; }; diff --git a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi index 7cbdc0912ab7..f4227e2743f2 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi @@ -7,7 +7,7 @@ &cbass_wakeup { dmsc: dmsc { - compatible = "ti,k2g-sci"; + compatible = "ti,am654-sci"; ti,host-id = <12>; #address-cells = <1>; #size-cells = <1>; @@ -20,7 +20,7 @@ k3_pds: power-controller { compatible = "ti,sci-pm-domain"; - #power-domain-cells = <1>; + #power-domain-cells = <2>; }; k3_clks: clocks { @@ -50,7 +50,7 @@ interrupts = <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; current-speed = <115200>; - power-domains = <&k3_pds 150>; + power-domains = <&k3_pds 150 TI_SCI_PD_EXCLUSIVE>; }; wkup_i2c0: i2c@42120000 { @@ -61,6 +61,32 @@ #size-cells = <0>; clock-names = "fck"; clocks = <&k3_clks 115 1>; - power-domains = <&k3_pds 115>; + power-domains = <&k3_pds 115 TI_SCI_PD_EXCLUSIVE>; + }; + + intr_wkup_gpio: interrupt-controller2 { + compatible = "ti,sci-intr"; + ti,intr-trigger-type = <1>; + interrupt-controller; + interrupt-parent = <&gic500>; + #interrupt-cells = <2>; + ti,sci = <&dmsc>; + ti,sci-dst-id = <56>; + ti,sci-rm-range-girq = <0x4>; + }; + + wkup_gpio0: wkup_gpio0@42110000 { + compatible = "ti,am654-gpio", "ti,keystone-gpio"; + reg = <0x42110000 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&intr_wkup_gpio>; + interrupts = <59 128>, <59 129>, <59 130>, <59 131>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <56>; + ti,davinci-gpio-unbanked = <0>; + clocks = <&k3_clks 59 0>; + clock-names = "gpio"; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am65.dtsi b/arch/arm64/boot/dts/ti/k3-am65.dtsi index 50f4be2047a9..6dfccd5d56c8 100644 --- a/arch/arm64/boot/dts/ti/k3-am65.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65.dtsi @@ -9,6 +9,7 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/pinctrl/k3.h> +#include <dt-bindings/soc/ti,sci_pm_domain.h> / { model = "Texas Instruments K3 AM654 SoC"; @@ -68,9 +69,14 @@ <0x00 0x00900000 0x00 0x00900000 0x00 0x00012000>, /* serdes */ <0x00 0x01000000 0x00 0x01000000 0x00 0x0af02400>, /* Most peripherals */ <0x00 0x30800000 0x00 0x30800000 0x00 0x0bc00000>, /* MAIN NAVSS */ + <0x00 0x70000000 0x00 0x70000000 0x00 0x00200000>, /* MSMC SRAM */ + <0x00 0x10000000 0x00 0x10000000 0x00 0x10000000>, /* PCIe DAT */ /* MCUSS Range */ <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, <0x00 0x40200000 0x00 0x40200000 0x00 0x00900100>, + <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, + <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, + <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00080000>, <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, @@ -82,6 +88,9 @@ #size-cells = <2>; ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/ <0x00 0x40200000 0x00 0x40200000 0x00 0x00900100>, /* First peripheral window */ + <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */ + <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */ + <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00080000>, /* MCU SRAM */ <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP */ <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */ <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */ diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts index cf1aa276a1ea..1102b84f853d 100644 --- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts +++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts @@ -6,6 +6,7 @@ /dts-v1/; #include "k3-am654.dtsi" +#include <dt-bindings/input/input.h> / { compatible = "ti,am654-evm", "ti,am654"; @@ -33,6 +34,25 @@ no-map; }; }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + pinctrl-names = "default"; + pinctrl-0 = <&push_button_pins_default>; + + sw5 { + label = "GPIO Key USER1"; + linux,code = <BTN_0>; + gpios = <&wkup_gpio0 24 GPIO_ACTIVE_LOW>; + }; + + sw6 { + label = "GPIO Key USER2"; + linux,code = <BTN_1>; + gpios = <&wkup_gpio0 27 GPIO_ACTIVE_LOW>; + }; + }; }; &wkup_pmx0 { @@ -42,6 +62,13 @@ AM65X_WKUP_IOPAD(0x00e4, PIN_INPUT, 0) /* (AD6) WKUP_I2C0_SDA */ >; }; + + push_button_pins_default: push_button__pins_default { + pinctrl-single,pins = < + AM65X_WKUP_IOPAD(0x0030, PIN_INPUT, 7) /* (R5) WKUP_GPIO0_24 */ + AM65X_WKUP_IOPAD(0x003c, PIN_INPUT, 7) /* (P2) WKUP_GPIO0_27 */ + >; + }; }; &main_pmx0 { @@ -124,6 +151,7 @@ &main_uart0 { pinctrl-names = "default"; pinctrl-0 = <&main_uart0_pins_default>; + power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>; }; &wkup_i2c0 { @@ -228,3 +256,27 @@ ti,adc-channels = <0 1 2 3 4 5 6 7>; }; }; + +&serdes0 { + status = "disabled"; +}; + +&serdes1 { + status = "disabled"; +}; + +&pcie0_rc { + status = "disabled"; +}; + +&pcie0_ep { + status = "disabled"; +}; + +&pcie1_rc { + status = "disabled"; +}; + +&pcie1_ep { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts new file mode 100644 index 000000000000..d2894d55fbbe --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts @@ -0,0 +1,119 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/ + */ + +/dts-v1/; + +#include "k3-j721e-som-p0.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + chosen { + stdout-path = "serial2:115200n8"; + bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000"; + }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + autorepeat; + pinctrl-names = "default"; + pinctrl-0 = <&sw10_button_pins_default &sw11_button_pins_default>; + + sw10: sw10 { + label = "GPIO Key USER1"; + linux,code = <BTN_0>; + gpios = <&main_gpio0 0 GPIO_ACTIVE_LOW>; + }; + + sw11: sw11 { + label = "GPIO Key USER2"; + linux,code = <BTN_1>; + gpios = <&wkup_gpio0 7 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&main_pmx0 { + sw10_button_pins_default: sw10_button_pins_default { + pinctrl-single,pins = < + J721E_IOPAD(0x0, PIN_INPUT, 7) /* (AC18) EXTINTn.GPIO0_0 */ + >; + }; +}; + +&wkup_pmx0 { + sw11_button_pins_default: sw11_button_pins_default { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0xcc, PIN_INPUT, 7) /* (G28) WKUP_GPIO0_7 */ + >; + }; +}; + +&wkup_uart0 { + /* Wakeup UART is used by System firmware */ + status = "disabled"; +}; + +&main_uart0 { + power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>; +}; + +&main_uart3 { + /* UART not brought out */ + status = "disabled"; +}; + +&main_uart5 { + /* UART not brought out */ + status = "disabled"; +}; + +&main_uart6 { + /* UART not brought out */ + status = "disabled"; +}; + +&main_uart7 { + /* UART not brought out */ + status = "disabled"; +}; + +&main_uart8 { + /* UART not brought out */ + status = "disabled"; +}; + +&main_uart9 { + /* UART not brought out */ + status = "disabled"; +}; + +&main_gpio2 { + status = "disabled"; +}; + +&main_gpio3 { + status = "disabled"; +}; + +&main_gpio4 { + status = "disabled"; +}; + +&main_gpio5 { + status = "disabled"; +}; + +&main_gpio6 { + status = "disabled"; +}; + +&main_gpio7 { + status = "disabled"; +}; + +&wkup_gpio1 { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi new file mode 100644 index 000000000000..698ef9a1d5b7 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi @@ -0,0 +1,381 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for J721E SoC Family Main Domain peripherals + * + * Copyright (C) 2016-2019 Texas Instruments Incorporated - http://www.ti.com/ + */ + +&cbass_main { + msmc_ram: sram@70000000 { + compatible = "mmio-sram"; + reg = <0x0 0x70000000 0x0 0x800000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x70000000 0x800000>; + + atf-sram@0 { + reg = <0x0 0x20000>; + }; + }; + + gic500: interrupt-controller@1800000 { + compatible = "arm,gic-v3"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */ + <0x00 0x01900000 0x00 0x100000>; /* GICR */ + + /* vcpumntirq: virtual CPU interface maintenance interrupt */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + + gic_its: gic-its@1820000 { + compatible = "arm,gic-v3-its"; + reg = <0x00 0x01820000 0x00 0x10000>; + socionext,synquacer-pre-its = <0x1000000 0x400000>; + msi-controller; + #msi-cells = <1>; + }; + }; + + smmu0: smmu@36600000 { + compatible = "arm,smmu-v3"; + reg = <0x0 0x36600000 0x0 0x100000>; + interrupt-parent = <&gic500>; + interrupts = <GIC_SPI 772 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 768 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "eventq", "gerror"; + #iommu-cells = <1>; + }; + + main_gpio_intr: interrupt-controller0 { + compatible = "ti,sci-intr"; + ti,intr-trigger-type = <1>; + interrupt-controller; + interrupt-parent = <&gic500>; + #interrupt-cells = <2>; + ti,sci = <&dmsc>; + ti,sci-dst-id = <14>; + ti,sci-rm-range-girq = <0x1>; + }; + + cbass_main_navss: interconnect0 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + main_navss_intr: interrupt-controller1 { + compatible = "ti,sci-intr"; + ti,intr-trigger-type = <4>; + interrupt-controller; + interrupt-parent = <&gic500>; + #interrupt-cells = <2>; + ti,sci = <&dmsc>; + ti,sci-dst-id = <14>; + ti,sci-rm-range-girq = <0>, <2>; + }; + + main_udmass_inta: interrupt-controller@33d00000 { + compatible = "ti,sci-inta"; + reg = <0x0 0x33d00000 0x0 0x100000>; + interrupt-controller; + interrupt-parent = <&main_navss_intr>; + msi-controller; + ti,sci = <&dmsc>; + ti,sci-dev-id = <209>; + ti,sci-rm-range-vint = <0xa>; + ti,sci-rm-range-global-event = <0xd>; + }; + + hwspinlock: spinlock@30e00000 { + compatible = "ti,am654-hwspinlock"; + reg = <0x00 0x30e00000 0x00 0x1000>; + #hwlock-cells = <1>; + }; + }; + + secure_proxy_main: mailbox@32c00000 { + compatible = "ti,am654-secure-proxy"; + #mbox-cells = <1>; + reg-names = "target_data", "rt", "scfg"; + reg = <0x00 0x32c00000 0x00 0x100000>, + <0x00 0x32400000 0x00 0x100000>, + <0x00 0x32800000 0x00 0x100000>; + interrupt-names = "rx_011"; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + }; + + main_pmx0: pinmux@11c000 { + compatible = "pinctrl-single"; + /* Proxy 0 addressing */ + reg = <0x0 0x11c000 0x0 0x2b4>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + }; + + main_uart0: serial@2800000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02800000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 146 0>; + clock-names = "fclk"; + }; + + main_uart1: serial@2810000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02810000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 278 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 278 0>; + clock-names = "fclk"; + }; + + main_uart2: serial@2820000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02820000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 279 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 279 0>; + clock-names = "fclk"; + }; + + main_uart3: serial@2830000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02830000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 280 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 280 0>; + clock-names = "fclk"; + }; + + main_uart4: serial@2840000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02840000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 281 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 281 0>; + clock-names = "fclk"; + }; + + main_uart5: serial@2850000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02850000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 282 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 282 0>; + clock-names = "fclk"; + }; + + main_uart6: serial@2860000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02860000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 283 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 283 0>; + clock-names = "fclk"; + }; + + main_uart7: serial@2870000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02870000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 284 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 284 0>; + clock-names = "fclk"; + }; + + main_uart8: serial@2880000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02880000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 285 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 285 0>; + clock-names = "fclk"; + }; + + main_uart9: serial@2890000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02890000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 286 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 286 0>; + clock-names = "fclk"; + }; + + main_gpio0: gpio@600000 { + compatible = "ti,j721e-gpio", "ti,keystone-gpio"; + reg = <0x0 0x00600000 0x0 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&main_gpio_intr>; + interrupts = <105 0>, <105 1>, <105 2>, <105 3>, + <105 4>, <105 5>, <105 6>, <105 7>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <128>; + ti,davinci-gpio-unbanked = <0>; + power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 105 0>; + clock-names = "gpio"; + }; + + main_gpio1: gpio@601000 { + compatible = "ti,j721e-gpio", "ti,keystone-gpio"; + reg = <0x0 0x00601000 0x0 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&main_gpio_intr>; + interrupts = <106 0>, <106 1>, <106 2>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <36>; + ti,davinci-gpio-unbanked = <0>; + power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 106 0>; + clock-names = "gpio"; + }; + + main_gpio2: gpio@610000 { + compatible = "ti,j721e-gpio", "ti,keystone-gpio"; + reg = <0x0 0x00610000 0x0 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&main_gpio_intr>; + interrupts = <107 0>, <107 1>, <107 2>, <107 3>, + <107 4>, <107 5>, <107 6>, <107 7>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <128>; + ti,davinci-gpio-unbanked = <0>; + power-domains = <&k3_pds 107 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 107 0>; + clock-names = "gpio"; + }; + + main_gpio3: gpio@611000 { + compatible = "ti,j721e-gpio", "ti,keystone-gpio"; + reg = <0x0 0x00611000 0x0 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&main_gpio_intr>; + interrupts = <108 0>, <108 1>, <108 2>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <36>; + ti,davinci-gpio-unbanked = <0>; + power-domains = <&k3_pds 108 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 108 0>; + clock-names = "gpio"; + }; + + main_gpio4: gpio@620000 { + compatible = "ti,j721e-gpio", "ti,keystone-gpio"; + reg = <0x0 0x00620000 0x0 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&main_gpio_intr>; + interrupts = <109 0>, <109 1>, <109 2>, <109 3>, + <109 4>, <109 5>, <109 6>, <109 7>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <128>; + ti,davinci-gpio-unbanked = <0>; + power-domains = <&k3_pds 109 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 109 0>; + clock-names = "gpio"; + }; + + main_gpio5: gpio@621000 { + compatible = "ti,j721e-gpio", "ti,keystone-gpio"; + reg = <0x0 0x00621000 0x0 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&main_gpio_intr>; + interrupts = <110 0>, <110 1>, <110 2>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <36>; + ti,davinci-gpio-unbanked = <0>; + power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 110 0>; + clock-names = "gpio"; + }; + + main_gpio6: gpio@630000 { + compatible = "ti,j721e-gpio", "ti,keystone-gpio"; + reg = <0x0 0x00630000 0x0 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&main_gpio_intr>; + interrupts = <111 0>, <111 1>, <111 2>, <111 3>, + <111 4>, <111 5>, <111 6>, <111 7>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <128>; + ti,davinci-gpio-unbanked = <0>; + power-domains = <&k3_pds 111 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 111 0>; + clock-names = "gpio"; + }; + + main_gpio7: gpio@631000 { + compatible = "ti,j721e-gpio", "ti,keystone-gpio"; + reg = <0x0 0x00631000 0x0 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&main_gpio_intr>; + interrupts = <112 0>, <112 1>, <112 2>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <36>; + ti,davinci-gpio-unbanked = <0>; + power-domains = <&k3_pds 112 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 112 0>; + clock-names = "gpio"; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi new file mode 100644 index 000000000000..555dc7b7aedc --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi @@ -0,0 +1,124 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for J721E SoC Family MCU/WAKEUP Domain peripherals + * + * Copyright (C) 2016-2019 Texas Instruments Incorporated - http://www.ti.com/ + */ + +&cbass_mcu_wakeup { + dmsc: dmsc@44083000 { + compatible = "ti,k2g-sci"; + ti,host-id = <12>; + + mbox-names = "rx", "tx"; + + mboxes= <&secure_proxy_main 11>, + <&secure_proxy_main 13>; + + reg-names = "debug_messages"; + reg = <0x00 0x44083000 0x0 0x1000>; + + k3_pds: power-controller { + compatible = "ti,sci-pm-domain"; + #power-domain-cells = <2>; + }; + + k3_clks: clocks { + compatible = "ti,k2g-sci-clk"; + #clock-cells = <2>; + }; + + k3_reset: reset-controller { + compatible = "ti,sci-reset"; + #reset-cells = <2>; + }; + }; + + wkup_pmx0: pinmux@4301c000 { + compatible = "pinctrl-single"; + /* Proxy 0 addressing */ + reg = <0x00 0x4301c000 0x00 0x178>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + }; + + mcu_ram: sram@41c00000 { + compatible = "mmio-sram"; + reg = <0x00 0x41c00000 0x00 0x100000>; + ranges = <0x0 0x00 0x41c00000 0x100000>; + #address-cells = <1>; + #size-cells = <1>; + }; + + wkup_uart0: serial@42300000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x42300000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 287 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 287 0>; + clock-names = "fclk"; + }; + + mcu_uart0: serial@40a00000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x40a00000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <96000000>; + current-speed = <115200>; + power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 149 0>; + clock-names = "fclk"; + }; + + wkup_gpio_intr: interrupt-controller2 { + compatible = "ti,sci-intr"; + ti,intr-trigger-type = <1>; + interrupt-controller; + interrupt-parent = <&gic500>; + #interrupt-cells = <2>; + ti,sci = <&dmsc>; + ti,sci-dst-id = <14>; + ti,sci-rm-range-girq = <0x5>; + }; + + wkup_gpio0: gpio@42110000 { + compatible = "ti,j721e-gpio", "ti,keystone-gpio"; + reg = <0x0 0x42110000 0x0 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&wkup_gpio_intr>; + interrupts = <113 0>, <113 1>, <113 2>, + <113 3>, <113 4>, <113 5>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <84>; + ti,davinci-gpio-unbanked = <0>; + power-domains = <&k3_pds 113 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 113 0>; + clock-names = "gpio"; + }; + + wkup_gpio1: gpio@42100000 { + compatible = "ti,j721e-gpio", "ti,keystone-gpio"; + reg = <0x0 0x42100000 0x0 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&wkup_gpio_intr>; + interrupts = <114 0>, <114 1>, <114 2>, + <114 3>, <114 4>, <114 5>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <84>; + ti,davinci-gpio-unbanked = <0>; + power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 114 0>; + clock-names = "gpio"; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi new file mode 100644 index 000000000000..1884fc70148f --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/ + */ + +/dts-v1/; + +#include "k3-j721e.dtsi" + +/ { + memory@80000000 { + device_type = "memory"; + /* 4G RAM */ + reg = <0x00000000 0x80000000 0x00000000 0x80000000>, + <0x00000008 0x80000000 0x00000000 0x80000000>; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + secure_ddr: optee@9e800000 { + reg = <0x00 0x9e800000 0x00 0x01800000>; + alignment = <0x1000>; + no-map; + }; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j721e.dtsi b/arch/arm64/boot/dts/ti/k3-j721e.dtsi new file mode 100644 index 000000000000..43ea1ba97922 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-j721e.dtsi @@ -0,0 +1,178 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for J721E SoC Family + * + * Copyright (C) 2016-2019 Texas Instruments Incorporated - http://www.ti.com/ + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/pinctrl/k3.h> +#include <dt-bindings/soc/ti,sci_pm_domain.h> + +/ { + model = "Texas Instruments K3 J721E SoC"; + compatible = "ti,j721e"; + interrupt-parent = <&gic500>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &wkup_uart0; + serial1 = &mcu_uart0; + serial2 = &main_uart0; + serial3 = &main_uart1; + serial4 = &main_uart2; + serial5 = &main_uart3; + serial6 = &main_uart4; + serial7 = &main_uart5; + serial8 = &main_uart6; + serial9 = &main_uart7; + serial10 = &main_uart8; + serial11 = &main_uart9; + }; + + chosen { }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu-map { + cluster0: cluster0 { + core0 { + cpu = <&cpu0>; + }; + + core1 { + cpu = <&cpu1>; + }; + }; + + }; + + cpu0: cpu@0 { + compatible = "arm,cortex-a72"; + reg = <0x000>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0xC000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&L2_0>; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a72"; + reg = <0x001>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0xC000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&L2_0>; + }; + }; + + L2_0: l2-cache0 { + compatible = "cache"; + cache-level = <2>; + cache-size = <0x100000>; + cache-line-size = <64>; + cache-sets = <2048>; + next-level-cache = <&msmc_l3>; + }; + + msmc_l3: l3-cache0 { + compatible = "cache"; + cache-level = <3>; + }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + + psci: psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + }; + + a72_timer0: timer-cl0-cpu0 { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */ + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */ + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */ + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */ + }; + + pmu: pmu { + compatible = "arm,armv8-pmuv3"; + /* Recommendation from GIC500 TRM Table A.3 */ + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + cbass_main: interconnect@100000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */ + <0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */ + <0x00 0x00900000 0x00 0x00900000 0x00 0x00012000>, /* serdes */ + <0x00 0x00A40000 0x00 0x00A40000 0x00 0x00000800>, /* timesync router */ + <0x00 0x01000000 0x00 0x01000000 0x00 0x0af02400>, /* Most peripherals */ + <0x00 0x30800000 0x00 0x30800000 0x00 0x0bc00000>, /* MAIN NAVSS */ + <0x00 0x0d000000 0x00 0x0d000000 0x00 0x01000000>, /* PCIe Core*/ + <0x00 0x10000000 0x00 0x10000000 0x00 0x10000000>, /* PCIe DAT */ + <0x00 0x64800000 0x00 0x64800000 0x00 0x00800000>, /* C71 */ + <0x4d 0x80800000 0x4d 0x80800000 0x00 0x00800000>, /* C66_0 */ + <0x4d 0x81800000 0x4d 0x81800000 0x00 0x00800000>, /* C66_1 */ + <0x4e 0x20000000 0x4e 0x20000000 0x00 0x00080000>, /* GPU */ + <0x00 0x70000000 0x00 0x70000000 0x00 0x00800000>, /* MSMC RAM */ + + /* MCUSS_WKUP Range */ + <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, + <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>, + <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, + <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, + <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, + <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>, + <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, + <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, + <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, + <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, + <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, + <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, + <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; + + cbass_mcu_wakeup: interconnect@28380000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/ + <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>, /* First peripheral window */ + <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */ + <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */ + <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */ + <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>, /* MCU SRAM */ + <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP peripheral window */ + <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */ + <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */ + <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI register space */ + <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, /* FSS OSPI0/1 data region 0 */ + <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS OSPI0 data region 3 */ + <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; /* FSS OSPI1 data region 3*/ + }; + }; +}; + +/* Now include the peripherals for each bus segments */ +#include "k3-j721e-main.dtsi" +#include "k3-j721e-mcu-wakeup.dtsi" diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 6bca5b082ea4..8e05c39eab08 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -68,9 +68,11 @@ CONFIG_KEXEC=y CONFIG_CRASH_DUMP=y CONFIG_XEN=y CONFIG_COMPAT=y +CONFIG_RANDOMIZE_BASE=y CONFIG_HIBERNATION=y CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y CONFIG_ARM_CPUIDLE=y +CONFIG_ARM_PSCI_CPUIDLE=y CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_STAT=y CONFIG_CPU_FREQ_GOV_POWERSAVE=m @@ -82,6 +84,8 @@ CONFIG_CPUFREQ_DT=y CONFIG_ACPI_CPPC_CPUFREQ=m CONFIG_ARM_ARMADA_37XX_CPUFREQ=y CONFIG_ARM_SCPI_CPUFREQ=y +CONFIG_ARM_IMX_CPUFREQ_DT=m +CONFIG_ARM_RASPBERRYPI_CPUFREQ=m CONFIG_ARM_TEGRA186_CPUFREQ=y CONFIG_ARM_SCPI_PROTOCOL=y CONFIG_RASPBERRYPI_FIRMWARE=y @@ -93,6 +97,7 @@ CONFIG_IMX_SCU_PD=y CONFIG_ACPI=y CONFIG_ACPI_APEI=y CONFIG_ACPI_APEI_GHES=y +CONFIG_ACPI_APEI_PCIEAER=y CONFIG_ACPI_APEI_MEMORY_FAILURE=y CONFIG_ACPI_APEI_EINJ=y CONFIG_VIRTUALIZATION=y @@ -191,9 +196,11 @@ CONFIG_PCIE_QCOM=y CONFIG_PCIE_ARMADA_8K=y CONFIG_PCIE_KIRIN=y CONFIG_PCIE_HISI_STB=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_PCIE_TEGRA194=m CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y +CONFIG_FW_LOADER_USER_HELPER=y +CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y CONFIG_HISILICON_LPC=y CONFIG_SIMPLE_PM_BUS=y CONFIG_MTD=y @@ -215,6 +222,7 @@ CONFIG_BLK_DEV_SD=y CONFIG_SCSI_SAS_ATA=y CONFIG_SCSI_HISI_SAS=y CONFIG_SCSI_HISI_SAS_PCI=y +CONFIG_SCSI_MPT3SAS=m CONFIG_SCSI_UFSHCD=y CONFIG_SCSI_UFSHCD_PLATFORM=y CONFIG_SCSI_UFS_QCOM=m @@ -230,6 +238,11 @@ CONFIG_SATA_SIL24=y CONFIG_SATA_RCAR=y CONFIG_PATA_PLATFORM=y CONFIG_PATA_OF_PLATFORM=y +CONFIG_MD=y +CONFIG_BLK_DEV_MD=m +CONFIG_BLK_DEV_DM=m +CONFIG_DM_MIRROR=m +CONFIG_DM_ZERO=m CONFIG_NETDEVICES=y CONFIG_MACVLAN=m CONFIG_MACVTAP=m @@ -239,6 +252,7 @@ CONFIG_VIRTIO_NET=y CONFIG_AMD_XGBE=y CONFIG_NET_XGENE=y CONFIG_ATL1C=m +CONFIG_BNX2X=m CONFIG_MACB=y CONFIG_THUNDER_NIC_PF=y CONFIG_FEC=y @@ -251,6 +265,15 @@ CONFIG_HNS3_ENET=y CONFIG_E1000E=y CONFIG_IGB=y CONFIG_IGBVF=y +CONFIG_MLX4_EN=m +CONFIG_MLX4_CORE=m +CONFIG_MLX4_DEBUG=y +CONFIG_MLX4_CORE_GEN2=y +CONFIG_MLX5_CORE=m +CONFIG_MLX5_CORE_EN=y +CONFIG_MLX5_EN_ARFS=y +CONFIG_MLX5_EN_RXNFC=y +CONFIG_MLX5_MPFS=y CONFIG_MVNETA=y CONFIG_MVPP2=y CONFIG_SKY2=y @@ -290,6 +313,7 @@ CONFIG_WLCORE_SDIO=m CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_ADC=m CONFIG_KEYBOARD_GPIO=y +CONFIG_KEYBOARD_SNVS_PWRKEY=m CONFIG_KEYBOARD_CROS_EC=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ATMEL_MXT=m @@ -343,9 +367,11 @@ CONFIG_I2C_BCM2835=m CONFIG_I2C_DESIGNWARE_PLATFORM=y CONFIG_I2C_GPIO=m CONFIG_I2C_IMX=y +CONFIG_I2C_IMX_LPI2C=y CONFIG_I2C_MESON=y CONFIG_I2C_MV64XXX=y CONFIG_I2C_PXA=y +CONFIG_I2C_QCOM_GENI=m CONFIG_I2C_QUP=y CONFIG_I2C_RK3X=y CONFIG_I2C_SH_MOBILE=y @@ -358,6 +384,7 @@ CONFIG_SPI_ARMADA_3700=y CONFIG_SPI_BCM2835=m CONFIG_SPI_BCM2835AUX=m CONFIG_SPI_NXP_FLEXSPI=y +CONFIG_SPI_IMX=m CONFIG_SPI_MESON_SPICC=m CONFIG_SPI_MESON_SPIFC=m CONFIG_SPI_ORION=y @@ -370,6 +397,8 @@ CONFIG_SPI_SUN6I=y CONFIG_SPMI=y CONFIG_PINCTRL_SINGLE=y CONFIG_PINCTRL_MAX77620=y +CONFIG_PINCTRL_IMX8MM=y +CONFIG_PINCTRL_IMX8MN=y CONFIG_PINCTRL_IMX8MQ=y CONFIG_PINCTRL_IMX8QXP=y CONFIG_PINCTRL_IPQ8074=y @@ -381,6 +410,7 @@ CONFIG_PINCTRL_QCS404=y CONFIG_PINCTRL_QDF2XXX=y CONFIG_PINCTRL_QCOM_SPMI_PMIC=y CONFIG_PINCTRL_SDM845=y +CONFIG_PINCTRL_SM8150=y CONFIG_GPIO_DWAPB=y CONFIG_GPIO_MB86S7X=y CONFIG_GPIO_PL061=y @@ -388,6 +418,7 @@ CONFIG_GPIO_RCAR=y CONFIG_GPIO_UNIPHIER=y CONFIG_GPIO_XGENE=y CONFIG_GPIO_XGENE_SB=y +CONFIG_GPIO_MAX732X=y CONFIG_GPIO_PCA953X=y CONFIG_GPIO_PCA953X_IRQ=y CONFIG_GPIO_MAX77620=y @@ -404,9 +435,11 @@ CONFIG_SENSORS_LM90=m CONFIG_SENSORS_PWM_FAN=m CONFIG_SENSORS_RASPBERRYPI_HWMON=m CONFIG_SENSORS_INA2XX=m +CONFIG_SENSORS_INA3221=m CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y CONFIG_CPU_THERMAL=y CONFIG_THERMAL_EMULATION=y +CONFIG_QORIQ_THERMAL=m CONFIG_ROCKCHIP_THERMAL=m CONFIG_RCAR_THERMAL=y CONFIG_RCAR_GEN3_THERMAL=y @@ -420,7 +453,10 @@ CONFIG_UNIPHIER_THERMAL=y CONFIG_WATCHDOG=y CONFIG_ARM_SP805_WATCHDOG=y CONFIG_S3C2410_WATCHDOG=y +CONFIG_DW_WATCHDOG=y +CONFIG_SUNXI_WATCHDOG=m CONFIG_IMX2_WDT=y +CONFIG_IMX_SC_WDT=m CONFIG_MESON_GXBB_WATCHDOG=m CONFIG_MESON_WATCHDOG=m CONFIG_RENESAS_WDT=y @@ -439,8 +475,10 @@ CONFIG_MFD_MAX77620=y CONFIG_MFD_SPMI_PMIC=y CONFIG_MFD_RK808=y CONFIG_MFD_SEC_CORE=y +CONFIG_MFD_ROHM_BD718XX=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_AXP20X=y +CONFIG_REGULATOR_BD718XX=y CONFIG_REGULATOR_BD9571MWV=y CONFIG_REGULATOR_FAN53555=y CONFIG_REGULATOR_GPIO=y @@ -460,6 +498,7 @@ CONFIG_RC_CORE=m CONFIG_RC_DECODERS=y CONFIG_RC_DEVICES=y CONFIG_IR_MESON=m +CONFIG_IR_SUNXI=m CONFIG_MEDIA_SUPPORT=m CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_MEDIA_ANALOG_TV_SUPPORT=y @@ -478,6 +517,7 @@ CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=m CONFIG_VIDEO_RENESAS_FCP=m CONFIG_VIDEO_RENESAS_VSP1=m CONFIG_DRM=m +CONFIG_DRM_I2C_NXP_TDA998X=m CONFIG_DRM_NOUVEAU=m CONFIG_DRM_EXYNOS=m CONFIG_DRM_EXYNOS5433_DECON=y @@ -496,17 +536,22 @@ CONFIG_DRM_RCAR_DU=m CONFIG_DRM_SUN4I=m CONFIG_DRM_SUN8I_DW_HDMI=m CONFIG_DRM_SUN8I_MIXER=m +CONFIG_DRM_MSM=m CONFIG_DRM_TEGRA=m CONFIG_DRM_PANEL_SIMPLE=m CONFIG_DRM_SII902X=m CONFIG_DRM_I2C_ADV7511=m CONFIG_DRM_VC4=m +CONFIG_DRM_ETNAVIV=m CONFIG_DRM_HISI_HIBMC=m CONFIG_DRM_HISI_KIRIN=m CONFIG_DRM_MESON=m CONFIG_DRM_PL111=m +CONFIG_DRM_LIMA=m +CONFIG_DRM_PANFROST=m CONFIG_FB=y CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_EFI=y CONFIG_BACKLIGHT_GENERIC=m CONFIG_BACKLIGHT_PWM=m CONFIG_BACKLIGHT_LP855X=m @@ -526,6 +571,7 @@ CONFIG_SND_SOC_ROCKCHIP_RT5645=m CONFIG_SND_SOC_RK3399_GRU_SOUND=m CONFIG_SND_SOC_SAMSUNG=y CONFIG_SND_SOC_RCAR=m +CONFIG_SND_SUN4I_SPDIF=m CONFIG_SND_SOC_AK4613=m CONFIG_SND_SOC_ES7134=m CONFIG_SND_SOC_ES7241=m @@ -560,6 +606,8 @@ CONFIG_USB_ULPI=y CONFIG_USB_GADGET=y CONFIG_USB_RENESAS_USBHS_UDC=m CONFIG_USB_RENESAS_USB3=m +CONFIG_TYPEC=m +CONFIG_TYPEC_HD3SS3220=m CONFIG_MMC=y CONFIG_MMC_BLOCK_MINORS=32 CONFIG_MMC_ARMMMCI=y @@ -610,11 +658,14 @@ CONFIG_RTC_DRV_PL031=y CONFIG_RTC_DRV_SUN6I=y CONFIG_RTC_DRV_ARMADA38X=y CONFIG_RTC_DRV_TEGRA=y +CONFIG_RTC_DRV_SNVS=m CONFIG_RTC_DRV_IMX_SC=m CONFIG_RTC_DRV_XGENE=y CONFIG_DMADEVICES=y CONFIG_FSL_EDMA=y CONFIG_DMA_BCM2835=m +CONFIG_DMA_SUN6I=m +CONFIG_IMX_SDMA=y CONFIG_K3_DMA=y CONFIG_MV_XOR=y CONFIG_MV_XOR_V2=y @@ -640,10 +691,15 @@ CONFIG_COMMON_CLK_CS2000_CP=y CONFIG_COMMON_CLK_S2MPS11=y CONFIG_CLK_QORIQ=y CONFIG_COMMON_CLK_PWM=y +CONFIG_CLK_RASPBERRYPI=m +CONFIG_CLK_IMX8MM=y +CONFIG_CLK_IMX8MN=y CONFIG_CLK_IMX8MQ=y CONFIG_CLK_IMX8QXP=y CONFIG_TI_SCI_CLK=y CONFIG_COMMON_CLK_QCOM=y +CONFIG_QCOM_A53PLL=y +CONFIG_QCOM_CLK_APCS_MSM8916=y CONFIG_QCOM_CLK_SMD_RPM=y CONFIG_QCOM_CLK_RPMH=y CONFIG_IPQ_GCC_8074=y @@ -653,6 +709,7 @@ CONFIG_MSM_MMCC_8996=y CONFIG_MSM_GCC_8998=y CONFIG_QCS_GCC_404=y CONFIG_SDM_GCC_845=y +CONFIG_SM_GCC_8150=y CONFIG_HWSPINLOCK=y CONFIG_HWSPINLOCK_QCOM=y CONFIG_ARM_MHU=y @@ -674,6 +731,7 @@ CONFIG_RPMSG_QCOM_GLINK_RPM=y CONFIG_RPMSG_QCOM_GLINK_SMEM=m CONFIG_RPMSG_QCOM_SMD=y CONFIG_RASPBERRYPI_POWER=y +CONFIG_IMX_SCU_SOC=y CONFIG_QCOM_COMMAND_DB=y CONFIG_QCOM_GENI_SE=y CONFIG_QCOM_GLINK_SSR=m @@ -697,6 +755,7 @@ CONFIG_ARCH_TEGRA_210_SOC=y CONFIG_ARCH_TEGRA_186_SOC=y CONFIG_ARCH_TEGRA_194_SOC=y CONFIG_ARCH_K3_AM6_SOC=y +CONFIG_ARCH_K3_J721E_SOC=y CONFIG_SOC_TI=y CONFIG_TI_SCI_PM_DOMAINS=y CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y @@ -709,7 +768,9 @@ CONFIG_ROCKCHIP_SARADC=m CONFIG_IIO_CROS_EC_SENSORS_CORE=m CONFIG_IIO_CROS_EC_SENSORS=m CONFIG_IIO_CROS_EC_LIGHT_PROX=m +CONFIG_SENSORS_ISL29018=m CONFIG_IIO_CROS_EC_BARO=m +CONFIG_MPL3115=m CONFIG_PWM=y CONFIG_PWM_BCM2835=m CONFIG_PWM_CROS_EC=m @@ -727,6 +788,7 @@ CONFIG_PHY_HISTB_COMBPHY=y CONFIG_PHY_HISI_INNO_USB2=y CONFIG_PHY_MVEBU_CP110_COMPHY=y CONFIG_PHY_QCOM_QMP=m +CONFIG_PHY_QCOM_QUSB2=m CONFIG_PHY_QCOM_USB_HS=y CONFIG_PHY_RCAR_GEN3_PCIE=y CONFIG_PHY_RCAR_GEN3_USB2=y @@ -739,9 +801,13 @@ CONFIG_PHY_ROCKCHIP_TYPEC=y CONFIG_PHY_UNIPHIER_USB2=y CONFIG_PHY_UNIPHIER_USB3=y CONFIG_PHY_TEGRA_XUSB=y +CONFIG_FSL_IMX8_DDR_PMU=m CONFIG_HISI_PMU=y CONFIG_QCOM_L2_PMU=y CONFIG_QCOM_L3_PMU=y +CONFIG_NVMEM_SUNXI_SID=y +CONFIG_NVMEM_IMX_OCOTP=y +CONFIG_NVMEM_IMX_OCOTP_SCU=y CONFIG_QCOM_QFPROM=y CONFIG_ROCKCHIP_EFUSE=y CONFIG_UNIPHIER_EFUSE=y diff --git a/arch/arm64/crypto/Kconfig b/arch/arm64/crypto/Kconfig index d9a523ecdd83..4922c4451e7c 100644 --- a/arch/arm64/crypto/Kconfig +++ b/arch/arm64/crypto/Kconfig @@ -58,8 +58,7 @@ config CRYPTO_GHASH_ARM64_CE depends on KERNEL_MODE_NEON select CRYPTO_HASH select CRYPTO_GF128MUL - select CRYPTO_AES - select CRYPTO_AES_ARM64 + select CRYPTO_LIB_AES config CRYPTO_CRCT10DIF_ARM64_CE tristate "CRCT10DIF digest algorithm using PMULL instructions" @@ -74,15 +73,15 @@ config CRYPTO_AES_ARM64_CE tristate "AES core cipher using ARMv8 Crypto Extensions" depends on ARM64 && KERNEL_MODE_NEON select CRYPTO_ALGAPI - select CRYPTO_AES_ARM64 + select CRYPTO_LIB_AES config CRYPTO_AES_ARM64_CE_CCM tristate "AES in CCM mode using ARMv8 Crypto Extensions" depends on ARM64 && KERNEL_MODE_NEON select CRYPTO_ALGAPI select CRYPTO_AES_ARM64_CE - select CRYPTO_AES_ARM64 select CRYPTO_AEAD + select CRYPTO_LIB_AES config CRYPTO_AES_ARM64_CE_BLK tristate "AES in ECB/CBC/CTR/XTS modes using ARMv8 Crypto Extensions" @@ -97,7 +96,7 @@ config CRYPTO_AES_ARM64_NEON_BLK depends on KERNEL_MODE_NEON select CRYPTO_BLKCIPHER select CRYPTO_AES_ARM64 - select CRYPTO_AES + select CRYPTO_LIB_AES select CRYPTO_SIMD config CRYPTO_CHACHA20_NEON @@ -117,6 +116,7 @@ config CRYPTO_AES_ARM64_BS select CRYPTO_BLKCIPHER select CRYPTO_AES_ARM64_NEON_BLK select CRYPTO_AES_ARM64 + select CRYPTO_LIB_AES select CRYPTO_SIMD endif diff --git a/arch/arm64/crypto/aes-ce-ccm-glue.c b/arch/arm64/crypto/aes-ce-ccm-glue.c index 827e5473e5de..541cf9165748 100644 --- a/arch/arm64/crypto/aes-ce-ccm-glue.c +++ b/arch/arm64/crypto/aes-ce-ccm-glue.c @@ -43,8 +43,6 @@ asmlinkage void ce_aes_ccm_decrypt(u8 out[], u8 const in[], u32 cbytes, asmlinkage void ce_aes_ccm_final(u8 mac[], u8 const ctr[], u32 const rk[], u32 rounds); -asmlinkage void __aes_arm64_encrypt(u32 *rk, u8 *out, const u8 *in, int rounds); - static int ccm_setkey(struct crypto_aead *tfm, const u8 *in_key, unsigned int key_len) { @@ -124,8 +122,7 @@ static void ccm_update_mac(struct crypto_aes_ctx *key, u8 mac[], u8 const in[], } while (abytes >= AES_BLOCK_SIZE) { - __aes_arm64_encrypt(key->key_enc, mac, mac, - num_rounds(key)); + aes_encrypt(key, mac, mac); crypto_xor(mac, in, AES_BLOCK_SIZE); in += AES_BLOCK_SIZE; @@ -133,8 +130,7 @@ static void ccm_update_mac(struct crypto_aes_ctx *key, u8 mac[], u8 const in[], } if (abytes > 0) { - __aes_arm64_encrypt(key->key_enc, mac, mac, - num_rounds(key)); + aes_encrypt(key, mac, mac); crypto_xor(mac, in, abytes); *macp = abytes; } @@ -206,10 +202,8 @@ static int ccm_crypt_fallback(struct skcipher_walk *walk, u8 mac[], u8 iv0[], bsize = nbytes; crypto_inc(walk->iv, AES_BLOCK_SIZE); - __aes_arm64_encrypt(ctx->key_enc, buf, walk->iv, - num_rounds(ctx)); - __aes_arm64_encrypt(ctx->key_enc, mac, mac, - num_rounds(ctx)); + aes_encrypt(ctx, buf, walk->iv); + aes_encrypt(ctx, mac, mac); if (enc) crypto_xor(mac, src, bsize); crypto_xor_cpy(dst, src, buf, bsize); @@ -224,8 +218,8 @@ static int ccm_crypt_fallback(struct skcipher_walk *walk, u8 mac[], u8 iv0[], } if (!err) { - __aes_arm64_encrypt(ctx->key_enc, buf, iv0, num_rounds(ctx)); - __aes_arm64_encrypt(ctx->key_enc, mac, mac, num_rounds(ctx)); + aes_encrypt(ctx, buf, iv0); + aes_encrypt(ctx, mac, mac); crypto_xor(mac, buf, AES_BLOCK_SIZE); } return err; diff --git a/arch/arm64/crypto/aes-ce-glue.c b/arch/arm64/crypto/aes-ce-glue.c index d3bc97afde20..6d085dc56c51 100644 --- a/arch/arm64/crypto/aes-ce-glue.c +++ b/arch/arm64/crypto/aes-ce-glue.c @@ -20,9 +20,6 @@ MODULE_DESCRIPTION("Synchronous AES cipher using ARMv8 Crypto Extensions"); MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>"); MODULE_LICENSE("GPL v2"); -asmlinkage void __aes_arm64_encrypt(u32 *rk, u8 *out, const u8 *in, int rounds); -asmlinkage void __aes_arm64_decrypt(u32 *rk, u8 *out, const u8 *in, int rounds); - struct aes_block { u8 b[AES_BLOCK_SIZE]; }; @@ -51,7 +48,7 @@ static void aes_cipher_encrypt(struct crypto_tfm *tfm, u8 dst[], u8 const src[]) struct crypto_aes_ctx *ctx = crypto_tfm_ctx(tfm); if (!crypto_simd_usable()) { - __aes_arm64_encrypt(ctx->key_enc, dst, src, num_rounds(ctx)); + aes_encrypt(ctx, dst, src); return; } @@ -65,7 +62,7 @@ static void aes_cipher_decrypt(struct crypto_tfm *tfm, u8 dst[], u8 const src[]) struct crypto_aes_ctx *ctx = crypto_tfm_ctx(tfm); if (!crypto_simd_usable()) { - __aes_arm64_decrypt(ctx->key_dec, dst, src, num_rounds(ctx)); + aes_decrypt(ctx, dst, src); return; } diff --git a/arch/arm64/crypto/aes-ce.S b/arch/arm64/crypto/aes-ce.S index 3ebfaec97e27..c132c49c89a8 100644 --- a/arch/arm64/crypto/aes-ce.S +++ b/arch/arm64/crypto/aes-ce.S @@ -15,10 +15,15 @@ .arch armv8-a+crypto xtsmask .req v16 + cbciv .req v16 + vctr .req v16 .macro xts_reload_mask, tmp .endm + .macro xts_cts_skip_tw, reg, lbl + .endm + /* preload all round keys */ .macro load_round_keys, rounds, rk cmp \rounds, #12 @@ -49,7 +54,7 @@ load_round_keys \rounds, \temp .endm - .macro do_enc_Nx, de, mc, k, i0, i1, i2, i3 + .macro do_enc_Nx, de, mc, k, i0, i1, i2, i3, i4 aes\de \i0\().16b, \k\().16b aes\mc \i0\().16b, \i0\().16b .ifnb \i1 @@ -60,27 +65,34 @@ aes\mc \i2\().16b, \i2\().16b aes\de \i3\().16b, \k\().16b aes\mc \i3\().16b, \i3\().16b + .ifnb \i4 + aes\de \i4\().16b, \k\().16b + aes\mc \i4\().16b, \i4\().16b + .endif .endif .endif .endm - /* up to 4 interleaved encryption rounds with the same round key */ - .macro round_Nx, enc, k, i0, i1, i2, i3 + /* up to 5 interleaved encryption rounds with the same round key */ + .macro round_Nx, enc, k, i0, i1, i2, i3, i4 .ifc \enc, e - do_enc_Nx e, mc, \k, \i0, \i1, \i2, \i3 + do_enc_Nx e, mc, \k, \i0, \i1, \i2, \i3, \i4 .else - do_enc_Nx d, imc, \k, \i0, \i1, \i2, \i3 + do_enc_Nx d, imc, \k, \i0, \i1, \i2, \i3, \i4 .endif .endm - /* up to 4 interleaved final rounds */ - .macro fin_round_Nx, de, k, k2, i0, i1, i2, i3 + /* up to 5 interleaved final rounds */ + .macro fin_round_Nx, de, k, k2, i0, i1, i2, i3, i4 aes\de \i0\().16b, \k\().16b .ifnb \i1 aes\de \i1\().16b, \k\().16b .ifnb \i3 aes\de \i2\().16b, \k\().16b aes\de \i3\().16b, \k\().16b + .ifnb \i4 + aes\de \i4\().16b, \k\().16b + .endif .endif .endif eor \i0\().16b, \i0\().16b, \k2\().16b @@ -89,47 +101,52 @@ .ifnb \i3 eor \i2\().16b, \i2\().16b, \k2\().16b eor \i3\().16b, \i3\().16b, \k2\().16b + .ifnb \i4 + eor \i4\().16b, \i4\().16b, \k2\().16b + .endif .endif .endif .endm - /* up to 4 interleaved blocks */ - .macro do_block_Nx, enc, rounds, i0, i1, i2, i3 + /* up to 5 interleaved blocks */ + .macro do_block_Nx, enc, rounds, i0, i1, i2, i3, i4 cmp \rounds, #12 blo 2222f /* 128 bits */ beq 1111f /* 192 bits */ - round_Nx \enc, v17, \i0, \i1, \i2, \i3 - round_Nx \enc, v18, \i0, \i1, \i2, \i3 -1111: round_Nx \enc, v19, \i0, \i1, \i2, \i3 - round_Nx \enc, v20, \i0, \i1, \i2, \i3 + round_Nx \enc, v17, \i0, \i1, \i2, \i3, \i4 + round_Nx \enc, v18, \i0, \i1, \i2, \i3, \i4 +1111: round_Nx \enc, v19, \i0, \i1, \i2, \i3, \i4 + round_Nx \enc, v20, \i0, \i1, \i2, \i3, \i4 2222: .irp key, v21, v22, v23, v24, v25, v26, v27, v28, v29 - round_Nx \enc, \key, \i0, \i1, \i2, \i3 + round_Nx \enc, \key, \i0, \i1, \i2, \i3, \i4 .endr - fin_round_Nx \enc, v30, v31, \i0, \i1, \i2, \i3 + fin_round_Nx \enc, v30, v31, \i0, \i1, \i2, \i3, \i4 .endm .macro encrypt_block, in, rounds, t0, t1, t2 do_block_Nx e, \rounds, \in .endm - .macro encrypt_block2x, i0, i1, rounds, t0, t1, t2 - do_block_Nx e, \rounds, \i0, \i1 - .endm - .macro encrypt_block4x, i0, i1, i2, i3, rounds, t0, t1, t2 do_block_Nx e, \rounds, \i0, \i1, \i2, \i3 .endm - .macro decrypt_block, in, rounds, t0, t1, t2 - do_block_Nx d, \rounds, \in + .macro encrypt_block5x, i0, i1, i2, i3, i4, rounds, t0, t1, t2 + do_block_Nx e, \rounds, \i0, \i1, \i2, \i3, \i4 .endm - .macro decrypt_block2x, i0, i1, rounds, t0, t1, t2 - do_block_Nx d, \rounds, \i0, \i1 + .macro decrypt_block, in, rounds, t0, t1, t2 + do_block_Nx d, \rounds, \in .endm .macro decrypt_block4x, i0, i1, i2, i3, rounds, t0, t1, t2 do_block_Nx d, \rounds, \i0, \i1, \i2, \i3 .endm + .macro decrypt_block5x, i0, i1, i2, i3, i4, rounds, t0, t1, t2 + do_block_Nx d, \rounds, \i0, \i1, \i2, \i3, \i4 + .endm + +#define MAX_STRIDE 5 + #include "aes-modes.S" diff --git a/arch/arm64/crypto/aes-cipher-core.S b/arch/arm64/crypto/aes-cipher-core.S index f06df0d2080c..423d0aebc570 100644 --- a/arch/arm64/crypto/aes-cipher-core.S +++ b/arch/arm64/crypto/aes-cipher-core.S @@ -128,43 +128,5 @@ ENDPROC(__aes_arm64_encrypt) .align 5 ENTRY(__aes_arm64_decrypt) - do_crypt iround, crypto_it_tab, __aes_arm64_inverse_sbox, 0 + do_crypt iround, crypto_it_tab, crypto_aes_inv_sbox, 0 ENDPROC(__aes_arm64_decrypt) - - .section ".rodata", "a" - .align L1_CACHE_SHIFT - .type __aes_arm64_inverse_sbox, %object -__aes_arm64_inverse_sbox: - .byte 0x52, 0x09, 0x6a, 0xd5, 0x30, 0x36, 0xa5, 0x38 - .byte 0xbf, 0x40, 0xa3, 0x9e, 0x81, 0xf3, 0xd7, 0xfb - .byte 0x7c, 0xe3, 0x39, 0x82, 0x9b, 0x2f, 0xff, 0x87 - .byte 0x34, 0x8e, 0x43, 0x44, 0xc4, 0xde, 0xe9, 0xcb - .byte 0x54, 0x7b, 0x94, 0x32, 0xa6, 0xc2, 0x23, 0x3d - .byte 0xee, 0x4c, 0x95, 0x0b, 0x42, 0xfa, 0xc3, 0x4e - .byte 0x08, 0x2e, 0xa1, 0x66, 0x28, 0xd9, 0x24, 0xb2 - .byte 0x76, 0x5b, 0xa2, 0x49, 0x6d, 0x8b, 0xd1, 0x25 - .byte 0x72, 0xf8, 0xf6, 0x64, 0x86, 0x68, 0x98, 0x16 - .byte 0xd4, 0xa4, 0x5c, 0xcc, 0x5d, 0x65, 0xb6, 0x92 - .byte 0x6c, 0x70, 0x48, 0x50, 0xfd, 0xed, 0xb9, 0xda - .byte 0x5e, 0x15, 0x46, 0x57, 0xa7, 0x8d, 0x9d, 0x84 - .byte 0x90, 0xd8, 0xab, 0x00, 0x8c, 0xbc, 0xd3, 0x0a - .byte 0xf7, 0xe4, 0x58, 0x05, 0xb8, 0xb3, 0x45, 0x06 - .byte 0xd0, 0x2c, 0x1e, 0x8f, 0xca, 0x3f, 0x0f, 0x02 - .byte 0xc1, 0xaf, 0xbd, 0x03, 0x01, 0x13, 0x8a, 0x6b - .byte 0x3a, 0x91, 0x11, 0x41, 0x4f, 0x67, 0xdc, 0xea - .byte 0x97, 0xf2, 0xcf, 0xce, 0xf0, 0xb4, 0xe6, 0x73 - .byte 0x96, 0xac, 0x74, 0x22, 0xe7, 0xad, 0x35, 0x85 - .byte 0xe2, 0xf9, 0x37, 0xe8, 0x1c, 0x75, 0xdf, 0x6e - .byte 0x47, 0xf1, 0x1a, 0x71, 0x1d, 0x29, 0xc5, 0x89 - .byte 0x6f, 0xb7, 0x62, 0x0e, 0xaa, 0x18, 0xbe, 0x1b - .byte 0xfc, 0x56, 0x3e, 0x4b, 0xc6, 0xd2, 0x79, 0x20 - .byte 0x9a, 0xdb, 0xc0, 0xfe, 0x78, 0xcd, 0x5a, 0xf4 - .byte 0x1f, 0xdd, 0xa8, 0x33, 0x88, 0x07, 0xc7, 0x31 - .byte 0xb1, 0x12, 0x10, 0x59, 0x27, 0x80, 0xec, 0x5f - .byte 0x60, 0x51, 0x7f, 0xa9, 0x19, 0xb5, 0x4a, 0x0d - .byte 0x2d, 0xe5, 0x7a, 0x9f, 0x93, 0xc9, 0x9c, 0xef - .byte 0xa0, 0xe0, 0x3b, 0x4d, 0xae, 0x2a, 0xf5, 0xb0 - .byte 0xc8, 0xeb, 0xbb, 0x3c, 0x83, 0x53, 0x99, 0x61 - .byte 0x17, 0x2b, 0x04, 0x7e, 0xba, 0x77, 0xd6, 0x26 - .byte 0xe1, 0x69, 0x14, 0x63, 0x55, 0x21, 0x0c, 0x7d - .size __aes_arm64_inverse_sbox, . - __aes_arm64_inverse_sbox diff --git a/arch/arm64/crypto/aes-cipher-glue.c b/arch/arm64/crypto/aes-cipher-glue.c index 0913966aa6fa..8caf6dfefce8 100644 --- a/arch/arm64/crypto/aes-cipher-glue.c +++ b/arch/arm64/crypto/aes-cipher-glue.c @@ -10,12 +10,9 @@ #include <linux/module.h> asmlinkage void __aes_arm64_encrypt(u32 *rk, u8 *out, const u8 *in, int rounds); -EXPORT_SYMBOL(__aes_arm64_encrypt); - asmlinkage void __aes_arm64_decrypt(u32 *rk, u8 *out, const u8 *in, int rounds); -EXPORT_SYMBOL(__aes_arm64_decrypt); -static void aes_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in) +static void aes_arm64_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in) { struct crypto_aes_ctx *ctx = crypto_tfm_ctx(tfm); int rounds = 6 + ctx->key_length / 4; @@ -23,7 +20,7 @@ static void aes_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in) __aes_arm64_encrypt(ctx->key_enc, out, in, rounds); } -static void aes_decrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in) +static void aes_arm64_decrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in) { struct crypto_aes_ctx *ctx = crypto_tfm_ctx(tfm); int rounds = 6 + ctx->key_length / 4; @@ -43,8 +40,8 @@ static struct crypto_alg aes_alg = { .cra_cipher.cia_min_keysize = AES_MIN_KEY_SIZE, .cra_cipher.cia_max_keysize = AES_MAX_KEY_SIZE, .cra_cipher.cia_setkey = crypto_aes_set_key, - .cra_cipher.cia_encrypt = aes_encrypt, - .cra_cipher.cia_decrypt = aes_decrypt + .cra_cipher.cia_encrypt = aes_arm64_encrypt, + .cra_cipher.cia_decrypt = aes_arm64_decrypt }; static int __init aes_init(void) diff --git a/arch/arm64/crypto/aes-ctr-fallback.h b/arch/arm64/crypto/aes-ctr-fallback.h deleted file mode 100644 index 3ac911990ec7..000000000000 --- a/arch/arm64/crypto/aes-ctr-fallback.h +++ /dev/null @@ -1,50 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Fallback for sync aes(ctr) in contexts where kernel mode NEON - * is not allowed - * - * Copyright (C) 2017 Linaro Ltd <ard.biesheuvel@linaro.org> - */ - -#include <crypto/aes.h> -#include <crypto/internal/skcipher.h> - -asmlinkage void __aes_arm64_encrypt(u32 *rk, u8 *out, const u8 *in, int rounds); - -static inline int aes_ctr_encrypt_fallback(struct crypto_aes_ctx *ctx, - struct skcipher_request *req) -{ - struct skcipher_walk walk; - u8 buf[AES_BLOCK_SIZE]; - int err; - - err = skcipher_walk_virt(&walk, req, true); - - while (walk.nbytes > 0) { - u8 *dst = walk.dst.virt.addr; - u8 *src = walk.src.virt.addr; - int nbytes = walk.nbytes; - int tail = 0; - - if (nbytes < walk.total) { - nbytes = round_down(nbytes, AES_BLOCK_SIZE); - tail = walk.nbytes % AES_BLOCK_SIZE; - } - - do { - int bsize = min(nbytes, AES_BLOCK_SIZE); - - __aes_arm64_encrypt(ctx->key_enc, buf, walk.iv, - 6 + ctx->key_length / 4); - crypto_xor_cpy(dst, src, buf, bsize); - crypto_inc(walk.iv, AES_BLOCK_SIZE); - - dst += AES_BLOCK_SIZE; - src += AES_BLOCK_SIZE; - nbytes -= AES_BLOCK_SIZE; - } while (nbytes > 0); - - err = skcipher_walk_done(&walk, tail); - } - return err; -} diff --git a/arch/arm64/crypto/aes-glue.c b/arch/arm64/crypto/aes-glue.c index 8d6c8932c841..aa57dc639f77 100644 --- a/arch/arm64/crypto/aes-glue.c +++ b/arch/arm64/crypto/aes-glue.c @@ -9,6 +9,8 @@ #include <asm/hwcap.h> #include <asm/simd.h> #include <crypto/aes.h> +#include <crypto/ctr.h> +#include <crypto/sha.h> #include <crypto/internal/hash.h> #include <crypto/internal/simd.h> #include <crypto/internal/skcipher.h> @@ -18,12 +20,10 @@ #include <crypto/xts.h> #include "aes-ce-setkey.h" -#include "aes-ctr-fallback.h" #ifdef USE_V8_CRYPTO_EXTENSIONS #define MODE "ce" #define PRIO 300 -#define aes_setkey ce_aes_setkey #define aes_expandkey ce_aes_expandkey #define aes_ecb_encrypt ce_aes_ecb_encrypt #define aes_ecb_decrypt ce_aes_ecb_decrypt @@ -31,6 +31,8 @@ #define aes_cbc_decrypt ce_aes_cbc_decrypt #define aes_cbc_cts_encrypt ce_aes_cbc_cts_encrypt #define aes_cbc_cts_decrypt ce_aes_cbc_cts_decrypt +#define aes_essiv_cbc_encrypt ce_aes_essiv_cbc_encrypt +#define aes_essiv_cbc_decrypt ce_aes_essiv_cbc_decrypt #define aes_ctr_encrypt ce_aes_ctr_encrypt #define aes_xts_encrypt ce_aes_xts_encrypt #define aes_xts_decrypt ce_aes_xts_decrypt @@ -39,27 +41,31 @@ MODULE_DESCRIPTION("AES-ECB/CBC/CTR/XTS using ARMv8 Crypto Extensions"); #else #define MODE "neon" #define PRIO 200 -#define aes_setkey crypto_aes_set_key -#define aes_expandkey crypto_aes_expand_key #define aes_ecb_encrypt neon_aes_ecb_encrypt #define aes_ecb_decrypt neon_aes_ecb_decrypt #define aes_cbc_encrypt neon_aes_cbc_encrypt #define aes_cbc_decrypt neon_aes_cbc_decrypt #define aes_cbc_cts_encrypt neon_aes_cbc_cts_encrypt #define aes_cbc_cts_decrypt neon_aes_cbc_cts_decrypt +#define aes_essiv_cbc_encrypt neon_aes_essiv_cbc_encrypt +#define aes_essiv_cbc_decrypt neon_aes_essiv_cbc_decrypt #define aes_ctr_encrypt neon_aes_ctr_encrypt #define aes_xts_encrypt neon_aes_xts_encrypt #define aes_xts_decrypt neon_aes_xts_decrypt #define aes_mac_update neon_aes_mac_update MODULE_DESCRIPTION("AES-ECB/CBC/CTR/XTS using ARMv8 NEON"); +#endif +#if defined(USE_V8_CRYPTO_EXTENSIONS) || !defined(CONFIG_CRYPTO_AES_ARM64_BS) MODULE_ALIAS_CRYPTO("ecb(aes)"); MODULE_ALIAS_CRYPTO("cbc(aes)"); MODULE_ALIAS_CRYPTO("ctr(aes)"); MODULE_ALIAS_CRYPTO("xts(aes)"); +#endif +MODULE_ALIAS_CRYPTO("cts(cbc(aes))"); +MODULE_ALIAS_CRYPTO("essiv(cbc(aes),sha256)"); MODULE_ALIAS_CRYPTO("cmac(aes)"); MODULE_ALIAS_CRYPTO("xcbc(aes)"); MODULE_ALIAS_CRYPTO("cbcmac(aes)"); -#endif MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>"); MODULE_LICENSE("GPL v2"); @@ -84,25 +90,32 @@ asmlinkage void aes_ctr_encrypt(u8 out[], u8 const in[], u32 const rk[], int rounds, int blocks, u8 ctr[]); asmlinkage void aes_xts_encrypt(u8 out[], u8 const in[], u32 const rk1[], - int rounds, int blocks, u32 const rk2[], u8 iv[], + int rounds, int bytes, u32 const rk2[], u8 iv[], int first); asmlinkage void aes_xts_decrypt(u8 out[], u8 const in[], u32 const rk1[], - int rounds, int blocks, u32 const rk2[], u8 iv[], + int rounds, int bytes, u32 const rk2[], u8 iv[], int first); +asmlinkage void aes_essiv_cbc_encrypt(u8 out[], u8 const in[], u32 const rk1[], + int rounds, int blocks, u8 iv[], + u32 const rk2[]); +asmlinkage void aes_essiv_cbc_decrypt(u8 out[], u8 const in[], u32 const rk1[], + int rounds, int blocks, u8 iv[], + u32 const rk2[]); + asmlinkage void aes_mac_update(u8 const in[], u32 const rk[], int rounds, int blocks, u8 dg[], int enc_before, int enc_after); -struct cts_cbc_req_ctx { - struct scatterlist sg_src[2]; - struct scatterlist sg_dst[2]; - struct skcipher_request subreq; +struct crypto_aes_xts_ctx { + struct crypto_aes_ctx key1; + struct crypto_aes_ctx __aligned(8) key2; }; -struct crypto_aes_xts_ctx { +struct crypto_aes_essiv_cbc_ctx { struct crypto_aes_ctx key1; struct crypto_aes_ctx __aligned(8) key2; + struct crypto_shash *hash; }; struct mac_tfm_ctx { @@ -118,11 +131,18 @@ struct mac_desc_ctx { static int skcipher_aes_setkey(struct crypto_skcipher *tfm, const u8 *in_key, unsigned int key_len) { - return aes_setkey(crypto_skcipher_tfm(tfm), in_key, key_len); + struct crypto_aes_ctx *ctx = crypto_skcipher_ctx(tfm); + int ret; + + ret = aes_expandkey(ctx, in_key, key_len); + if (ret) + crypto_skcipher_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN); + + return ret; } -static int xts_set_key(struct crypto_skcipher *tfm, const u8 *in_key, - unsigned int key_len) +static int __maybe_unused xts_set_key(struct crypto_skcipher *tfm, + const u8 *in_key, unsigned int key_len) { struct crypto_aes_xts_ctx *ctx = crypto_skcipher_ctx(tfm); int ret; @@ -142,7 +162,33 @@ static int xts_set_key(struct crypto_skcipher *tfm, const u8 *in_key, return -EINVAL; } -static int ecb_encrypt(struct skcipher_request *req) +static int __maybe_unused essiv_cbc_set_key(struct crypto_skcipher *tfm, + const u8 *in_key, + unsigned int key_len) +{ + struct crypto_aes_essiv_cbc_ctx *ctx = crypto_skcipher_ctx(tfm); + SHASH_DESC_ON_STACK(desc, ctx->hash); + u8 digest[SHA256_DIGEST_SIZE]; + int ret; + + ret = aes_expandkey(&ctx->key1, in_key, key_len); + if (ret) + goto out; + + desc->tfm = ctx->hash; + crypto_shash_digest(desc, in_key, key_len, digest); + + ret = aes_expandkey(&ctx->key2, digest, sizeof(digest)); + if (ret) + goto out; + + return 0; +out: + crypto_skcipher_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN); + return -EINVAL; +} + +static int __maybe_unused ecb_encrypt(struct skcipher_request *req) { struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); struct crypto_aes_ctx *ctx = crypto_skcipher_ctx(tfm); @@ -162,7 +208,7 @@ static int ecb_encrypt(struct skcipher_request *req) return err; } -static int ecb_decrypt(struct skcipher_request *req) +static int __maybe_unused ecb_decrypt(struct skcipher_request *req) { struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); struct crypto_aes_ctx *ctx = crypto_skcipher_ctx(tfm); @@ -182,63 +228,78 @@ static int ecb_decrypt(struct skcipher_request *req) return err; } -static int cbc_encrypt(struct skcipher_request *req) +static int cbc_encrypt_walk(struct skcipher_request *req, + struct skcipher_walk *walk) { struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); struct crypto_aes_ctx *ctx = crypto_skcipher_ctx(tfm); - int err, rounds = 6 + ctx->key_length / 4; - struct skcipher_walk walk; + int err = 0, rounds = 6 + ctx->key_length / 4; unsigned int blocks; - err = skcipher_walk_virt(&walk, req, false); - - while ((blocks = (walk.nbytes / AES_BLOCK_SIZE))) { + while ((blocks = (walk->nbytes / AES_BLOCK_SIZE))) { kernel_neon_begin(); - aes_cbc_encrypt(walk.dst.virt.addr, walk.src.virt.addr, - ctx->key_enc, rounds, blocks, walk.iv); + aes_cbc_encrypt(walk->dst.virt.addr, walk->src.virt.addr, + ctx->key_enc, rounds, blocks, walk->iv); kernel_neon_end(); - err = skcipher_walk_done(&walk, walk.nbytes % AES_BLOCK_SIZE); + err = skcipher_walk_done(walk, walk->nbytes % AES_BLOCK_SIZE); } return err; } -static int cbc_decrypt(struct skcipher_request *req) +static int __maybe_unused cbc_encrypt(struct skcipher_request *req) { - struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); - struct crypto_aes_ctx *ctx = crypto_skcipher_ctx(tfm); - int err, rounds = 6 + ctx->key_length / 4; struct skcipher_walk walk; - unsigned int blocks; + int err; err = skcipher_walk_virt(&walk, req, false); + if (err) + return err; + return cbc_encrypt_walk(req, &walk); +} - while ((blocks = (walk.nbytes / AES_BLOCK_SIZE))) { +static int cbc_decrypt_walk(struct skcipher_request *req, + struct skcipher_walk *walk) +{ + struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); + struct crypto_aes_ctx *ctx = crypto_skcipher_ctx(tfm); + int err = 0, rounds = 6 + ctx->key_length / 4; + unsigned int blocks; + + while ((blocks = (walk->nbytes / AES_BLOCK_SIZE))) { kernel_neon_begin(); - aes_cbc_decrypt(walk.dst.virt.addr, walk.src.virt.addr, - ctx->key_dec, rounds, blocks, walk.iv); + aes_cbc_decrypt(walk->dst.virt.addr, walk->src.virt.addr, + ctx->key_dec, rounds, blocks, walk->iv); kernel_neon_end(); - err = skcipher_walk_done(&walk, walk.nbytes % AES_BLOCK_SIZE); + err = skcipher_walk_done(walk, walk->nbytes % AES_BLOCK_SIZE); } return err; } -static int cts_cbc_init_tfm(struct crypto_skcipher *tfm) +static int __maybe_unused cbc_decrypt(struct skcipher_request *req) { - crypto_skcipher_set_reqsize(tfm, sizeof(struct cts_cbc_req_ctx)); - return 0; + struct skcipher_walk walk; + int err; + + err = skcipher_walk_virt(&walk, req, false); + if (err) + return err; + return cbc_decrypt_walk(req, &walk); } static int cts_cbc_encrypt(struct skcipher_request *req) { struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); struct crypto_aes_ctx *ctx = crypto_skcipher_ctx(tfm); - struct cts_cbc_req_ctx *rctx = skcipher_request_ctx(req); int err, rounds = 6 + ctx->key_length / 4; int cbc_blocks = DIV_ROUND_UP(req->cryptlen, AES_BLOCK_SIZE) - 2; struct scatterlist *src = req->src, *dst = req->dst; + struct scatterlist sg_src[2], sg_dst[2]; + struct skcipher_request subreq; struct skcipher_walk walk; - skcipher_request_set_tfm(&rctx->subreq, tfm); + skcipher_request_set_tfm(&subreq, tfm); + skcipher_request_set_callback(&subreq, skcipher_request_flags(req), + NULL, NULL); if (req->cryptlen <= AES_BLOCK_SIZE) { if (req->cryptlen < AES_BLOCK_SIZE) @@ -247,41 +308,30 @@ static int cts_cbc_encrypt(struct skcipher_request *req) } if (cbc_blocks > 0) { - unsigned int blocks; - - skcipher_request_set_crypt(&rctx->subreq, req->src, req->dst, + skcipher_request_set_crypt(&subreq, req->src, req->dst, cbc_blocks * AES_BLOCK_SIZE, req->iv); - err = skcipher_walk_virt(&walk, &rctx->subreq, false); - - while ((blocks = (walk.nbytes / AES_BLOCK_SIZE))) { - kernel_neon_begin(); - aes_cbc_encrypt(walk.dst.virt.addr, walk.src.virt.addr, - ctx->key_enc, rounds, blocks, walk.iv); - kernel_neon_end(); - err = skcipher_walk_done(&walk, - walk.nbytes % AES_BLOCK_SIZE); - } + err = skcipher_walk_virt(&walk, &subreq, false) ?: + cbc_encrypt_walk(&subreq, &walk); if (err) return err; if (req->cryptlen == AES_BLOCK_SIZE) return 0; - dst = src = scatterwalk_ffwd(rctx->sg_src, req->src, - rctx->subreq.cryptlen); + dst = src = scatterwalk_ffwd(sg_src, req->src, subreq.cryptlen); if (req->dst != req->src) - dst = scatterwalk_ffwd(rctx->sg_dst, req->dst, - rctx->subreq.cryptlen); + dst = scatterwalk_ffwd(sg_dst, req->dst, + subreq.cryptlen); } /* handle ciphertext stealing */ - skcipher_request_set_crypt(&rctx->subreq, src, dst, + skcipher_request_set_crypt(&subreq, src, dst, req->cryptlen - cbc_blocks * AES_BLOCK_SIZE, req->iv); - err = skcipher_walk_virt(&walk, &rctx->subreq, false); + err = skcipher_walk_virt(&walk, &subreq, false); if (err) return err; @@ -297,13 +347,16 @@ static int cts_cbc_decrypt(struct skcipher_request *req) { struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); struct crypto_aes_ctx *ctx = crypto_skcipher_ctx(tfm); - struct cts_cbc_req_ctx *rctx = skcipher_request_ctx(req); int err, rounds = 6 + ctx->key_length / 4; int cbc_blocks = DIV_ROUND_UP(req->cryptlen, AES_BLOCK_SIZE) - 2; struct scatterlist *src = req->src, *dst = req->dst; + struct scatterlist sg_src[2], sg_dst[2]; + struct skcipher_request subreq; struct skcipher_walk walk; - skcipher_request_set_tfm(&rctx->subreq, tfm); + skcipher_request_set_tfm(&subreq, tfm); + skcipher_request_set_callback(&subreq, skcipher_request_flags(req), + NULL, NULL); if (req->cryptlen <= AES_BLOCK_SIZE) { if (req->cryptlen < AES_BLOCK_SIZE) @@ -312,41 +365,30 @@ static int cts_cbc_decrypt(struct skcipher_request *req) } if (cbc_blocks > 0) { - unsigned int blocks; - - skcipher_request_set_crypt(&rctx->subreq, req->src, req->dst, + skcipher_request_set_crypt(&subreq, req->src, req->dst, cbc_blocks * AES_BLOCK_SIZE, req->iv); - err = skcipher_walk_virt(&walk, &rctx->subreq, false); - - while ((blocks = (walk.nbytes / AES_BLOCK_SIZE))) { - kernel_neon_begin(); - aes_cbc_decrypt(walk.dst.virt.addr, walk.src.virt.addr, - ctx->key_dec, rounds, blocks, walk.iv); - kernel_neon_end(); - err = skcipher_walk_done(&walk, - walk.nbytes % AES_BLOCK_SIZE); - } + err = skcipher_walk_virt(&walk, &subreq, false) ?: + cbc_decrypt_walk(&subreq, &walk); if (err) return err; if (req->cryptlen == AES_BLOCK_SIZE) return 0; - dst = src = scatterwalk_ffwd(rctx->sg_src, req->src, - rctx->subreq.cryptlen); + dst = src = scatterwalk_ffwd(sg_src, req->src, subreq.cryptlen); if (req->dst != req->src) - dst = scatterwalk_ffwd(rctx->sg_dst, req->dst, - rctx->subreq.cryptlen); + dst = scatterwalk_ffwd(sg_dst, req->dst, + subreq.cryptlen); } /* handle ciphertext stealing */ - skcipher_request_set_crypt(&rctx->subreq, src, dst, + skcipher_request_set_crypt(&subreq, src, dst, req->cryptlen - cbc_blocks * AES_BLOCK_SIZE, req->iv); - err = skcipher_walk_virt(&walk, &rctx->subreq, false); + err = skcipher_walk_virt(&walk, &subreq, false); if (err) return err; @@ -358,6 +400,66 @@ static int cts_cbc_decrypt(struct skcipher_request *req) return skcipher_walk_done(&walk, 0); } +static int __maybe_unused essiv_cbc_init_tfm(struct crypto_skcipher *tfm) +{ + struct crypto_aes_essiv_cbc_ctx *ctx = crypto_skcipher_ctx(tfm); + + ctx->hash = crypto_alloc_shash("sha256", 0, 0); + + return PTR_ERR_OR_ZERO(ctx->hash); +} + +static void __maybe_unused essiv_cbc_exit_tfm(struct crypto_skcipher *tfm) +{ + struct crypto_aes_essiv_cbc_ctx *ctx = crypto_skcipher_ctx(tfm); + + crypto_free_shash(ctx->hash); +} + +static int __maybe_unused essiv_cbc_encrypt(struct skcipher_request *req) +{ + struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); + struct crypto_aes_essiv_cbc_ctx *ctx = crypto_skcipher_ctx(tfm); + int err, rounds = 6 + ctx->key1.key_length / 4; + struct skcipher_walk walk; + unsigned int blocks; + + err = skcipher_walk_virt(&walk, req, false); + + blocks = walk.nbytes / AES_BLOCK_SIZE; + if (blocks) { + kernel_neon_begin(); + aes_essiv_cbc_encrypt(walk.dst.virt.addr, walk.src.virt.addr, + ctx->key1.key_enc, rounds, blocks, + req->iv, ctx->key2.key_enc); + kernel_neon_end(); + err = skcipher_walk_done(&walk, walk.nbytes % AES_BLOCK_SIZE); + } + return err ?: cbc_encrypt_walk(req, &walk); +} + +static int __maybe_unused essiv_cbc_decrypt(struct skcipher_request *req) +{ + struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); + struct crypto_aes_essiv_cbc_ctx *ctx = crypto_skcipher_ctx(tfm); + int err, rounds = 6 + ctx->key1.key_length / 4; + struct skcipher_walk walk; + unsigned int blocks; + + err = skcipher_walk_virt(&walk, req, false); + + blocks = walk.nbytes / AES_BLOCK_SIZE; + if (blocks) { + kernel_neon_begin(); + aes_essiv_cbc_decrypt(walk.dst.virt.addr, walk.src.virt.addr, + ctx->key1.key_dec, rounds, blocks, + req->iv, ctx->key2.key_enc); + kernel_neon_end(); + err = skcipher_walk_done(&walk, walk.nbytes % AES_BLOCK_SIZE); + } + return err ?: cbc_decrypt_walk(req, &walk); +} + static int ctr_encrypt(struct skcipher_request *req) { struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); @@ -397,62 +499,176 @@ static int ctr_encrypt(struct skcipher_request *req) return err; } -static int ctr_encrypt_sync(struct skcipher_request *req) +static void ctr_encrypt_one(struct crypto_skcipher *tfm, const u8 *src, u8 *dst) { - struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); - struct crypto_aes_ctx *ctx = crypto_skcipher_ctx(tfm); + const struct crypto_aes_ctx *ctx = crypto_skcipher_ctx(tfm); + unsigned long flags; + + /* + * Temporarily disable interrupts to avoid races where + * cachelines are evicted when the CPU is interrupted + * to do something else. + */ + local_irq_save(flags); + aes_encrypt(ctx, dst, src); + local_irq_restore(flags); +} +static int __maybe_unused ctr_encrypt_sync(struct skcipher_request *req) +{ if (!crypto_simd_usable()) - return aes_ctr_encrypt_fallback(ctx, req); + return crypto_ctr_encrypt_walk(req, ctr_encrypt_one); return ctr_encrypt(req); } -static int xts_encrypt(struct skcipher_request *req) +static int __maybe_unused xts_encrypt(struct skcipher_request *req) { struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); struct crypto_aes_xts_ctx *ctx = crypto_skcipher_ctx(tfm); int err, first, rounds = 6 + ctx->key1.key_length / 4; + int tail = req->cryptlen % AES_BLOCK_SIZE; + struct scatterlist sg_src[2], sg_dst[2]; + struct skcipher_request subreq; + struct scatterlist *src, *dst; struct skcipher_walk walk; - unsigned int blocks; + + if (req->cryptlen < AES_BLOCK_SIZE) + return -EINVAL; err = skcipher_walk_virt(&walk, req, false); - for (first = 1; (blocks = (walk.nbytes / AES_BLOCK_SIZE)); first = 0) { + if (unlikely(tail > 0 && walk.nbytes < walk.total)) { + int xts_blocks = DIV_ROUND_UP(req->cryptlen, + AES_BLOCK_SIZE) - 2; + + skcipher_walk_abort(&walk); + + skcipher_request_set_tfm(&subreq, tfm); + skcipher_request_set_callback(&subreq, + skcipher_request_flags(req), + NULL, NULL); + skcipher_request_set_crypt(&subreq, req->src, req->dst, + xts_blocks * AES_BLOCK_SIZE, + req->iv); + req = &subreq; + err = skcipher_walk_virt(&walk, req, false); + } else { + tail = 0; + } + + for (first = 1; walk.nbytes >= AES_BLOCK_SIZE; first = 0) { + int nbytes = walk.nbytes; + + if (walk.nbytes < walk.total) + nbytes &= ~(AES_BLOCK_SIZE - 1); + kernel_neon_begin(); aes_xts_encrypt(walk.dst.virt.addr, walk.src.virt.addr, - ctx->key1.key_enc, rounds, blocks, + ctx->key1.key_enc, rounds, nbytes, ctx->key2.key_enc, walk.iv, first); kernel_neon_end(); - err = skcipher_walk_done(&walk, walk.nbytes % AES_BLOCK_SIZE); + err = skcipher_walk_done(&walk, walk.nbytes - nbytes); } - return err; + if (err || likely(!tail)) + return err; + + dst = src = scatterwalk_ffwd(sg_src, req->src, req->cryptlen); + if (req->dst != req->src) + dst = scatterwalk_ffwd(sg_dst, req->dst, req->cryptlen); + + skcipher_request_set_crypt(req, src, dst, AES_BLOCK_SIZE + tail, + req->iv); + + err = skcipher_walk_virt(&walk, &subreq, false); + if (err) + return err; + + kernel_neon_begin(); + aes_xts_encrypt(walk.dst.virt.addr, walk.src.virt.addr, + ctx->key1.key_enc, rounds, walk.nbytes, + ctx->key2.key_enc, walk.iv, first); + kernel_neon_end(); + + return skcipher_walk_done(&walk, 0); } -static int xts_decrypt(struct skcipher_request *req) +static int __maybe_unused xts_decrypt(struct skcipher_request *req) { struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); struct crypto_aes_xts_ctx *ctx = crypto_skcipher_ctx(tfm); int err, first, rounds = 6 + ctx->key1.key_length / 4; + int tail = req->cryptlen % AES_BLOCK_SIZE; + struct scatterlist sg_src[2], sg_dst[2]; + struct skcipher_request subreq; + struct scatterlist *src, *dst; struct skcipher_walk walk; - unsigned int blocks; + + if (req->cryptlen < AES_BLOCK_SIZE) + return -EINVAL; err = skcipher_walk_virt(&walk, req, false); - for (first = 1; (blocks = (walk.nbytes / AES_BLOCK_SIZE)); first = 0) { + if (unlikely(tail > 0 && walk.nbytes < walk.total)) { + int xts_blocks = DIV_ROUND_UP(req->cryptlen, + AES_BLOCK_SIZE) - 2; + + skcipher_walk_abort(&walk); + + skcipher_request_set_tfm(&subreq, tfm); + skcipher_request_set_callback(&subreq, + skcipher_request_flags(req), + NULL, NULL); + skcipher_request_set_crypt(&subreq, req->src, req->dst, + xts_blocks * AES_BLOCK_SIZE, + req->iv); + req = &subreq; + err = skcipher_walk_virt(&walk, req, false); + } else { + tail = 0; + } + + for (first = 1; walk.nbytes >= AES_BLOCK_SIZE; first = 0) { + int nbytes = walk.nbytes; + + if (walk.nbytes < walk.total) + nbytes &= ~(AES_BLOCK_SIZE - 1); + kernel_neon_begin(); aes_xts_decrypt(walk.dst.virt.addr, walk.src.virt.addr, - ctx->key1.key_dec, rounds, blocks, + ctx->key1.key_dec, rounds, nbytes, ctx->key2.key_enc, walk.iv, first); kernel_neon_end(); - err = skcipher_walk_done(&walk, walk.nbytes % AES_BLOCK_SIZE); + err = skcipher_walk_done(&walk, walk.nbytes - nbytes); } - return err; + if (err || likely(!tail)) + return err; + + dst = src = scatterwalk_ffwd(sg_src, req->src, req->cryptlen); + if (req->dst != req->src) + dst = scatterwalk_ffwd(sg_dst, req->dst, req->cryptlen); + + skcipher_request_set_crypt(req, src, dst, AES_BLOCK_SIZE + tail, + req->iv); + + err = skcipher_walk_virt(&walk, &subreq, false); + if (err) + return err; + + + kernel_neon_begin(); + aes_xts_decrypt(walk.dst.virt.addr, walk.src.virt.addr, + ctx->key1.key_dec, rounds, walk.nbytes, + ctx->key2.key_enc, walk.iv, first); + kernel_neon_end(); + + return skcipher_walk_done(&walk, 0); } static struct skcipher_alg aes_algs[] = { { +#if defined(USE_V8_CRYPTO_EXTENSIONS) || !defined(CONFIG_CRYPTO_AES_ARM64_BS) .base = { .cra_name = "__ecb(aes)", .cra_driver_name = "__ecb-aes-" MODE, @@ -485,24 +701,6 @@ static struct skcipher_alg aes_algs[] = { { .decrypt = cbc_decrypt, }, { .base = { - .cra_name = "__cts(cbc(aes))", - .cra_driver_name = "__cts-cbc-aes-" MODE, - .cra_priority = PRIO, - .cra_flags = CRYPTO_ALG_INTERNAL, - .cra_blocksize = AES_BLOCK_SIZE, - .cra_ctxsize = sizeof(struct crypto_aes_ctx), - .cra_module = THIS_MODULE, - }, - .min_keysize = AES_MIN_KEY_SIZE, - .max_keysize = AES_MAX_KEY_SIZE, - .ivsize = AES_BLOCK_SIZE, - .walksize = 2 * AES_BLOCK_SIZE, - .setkey = skcipher_aes_setkey, - .encrypt = cts_cbc_encrypt, - .decrypt = cts_cbc_decrypt, - .init = cts_cbc_init_tfm, -}, { - .base = { .cra_name = "__ctr(aes)", .cra_driver_name = "__ctr-aes-" MODE, .cra_priority = PRIO, @@ -547,9 +745,46 @@ static struct skcipher_alg aes_algs[] = { { .min_keysize = 2 * AES_MIN_KEY_SIZE, .max_keysize = 2 * AES_MAX_KEY_SIZE, .ivsize = AES_BLOCK_SIZE, + .walksize = 2 * AES_BLOCK_SIZE, .setkey = xts_set_key, .encrypt = xts_encrypt, .decrypt = xts_decrypt, +}, { +#endif + .base = { + .cra_name = "__cts(cbc(aes))", + .cra_driver_name = "__cts-cbc-aes-" MODE, + .cra_priority = PRIO, + .cra_flags = CRYPTO_ALG_INTERNAL, + .cra_blocksize = AES_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct crypto_aes_ctx), + .cra_module = THIS_MODULE, + }, + .min_keysize = AES_MIN_KEY_SIZE, + .max_keysize = AES_MAX_KEY_SIZE, + .ivsize = AES_BLOCK_SIZE, + .walksize = 2 * AES_BLOCK_SIZE, + .setkey = skcipher_aes_setkey, + .encrypt = cts_cbc_encrypt, + .decrypt = cts_cbc_decrypt, +}, { + .base = { + .cra_name = "__essiv(cbc(aes),sha256)", + .cra_driver_name = "__essiv-cbc-aes-sha256-" MODE, + .cra_priority = PRIO + 1, + .cra_flags = CRYPTO_ALG_INTERNAL, + .cra_blocksize = AES_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct crypto_aes_essiv_cbc_ctx), + .cra_module = THIS_MODULE, + }, + .min_keysize = AES_MIN_KEY_SIZE, + .max_keysize = AES_MAX_KEY_SIZE, + .ivsize = AES_BLOCK_SIZE, + .setkey = essiv_cbc_set_key, + .encrypt = essiv_cbc_encrypt, + .decrypt = essiv_cbc_decrypt, + .init = essiv_cbc_init_tfm, + .exit = essiv_cbc_exit_tfm, } }; static int cbcmac_setkey(struct crypto_shash *tfm, const u8 *in_key, @@ -646,15 +881,14 @@ static void mac_do_update(struct crypto_aes_ctx *ctx, u8 const in[], int blocks, kernel_neon_end(); } else { if (enc_before) - __aes_arm64_encrypt(ctx->key_enc, dg, dg, rounds); + aes_encrypt(ctx, dg, dg); while (blocks--) { crypto_xor(dg, in, AES_BLOCK_SIZE); in += AES_BLOCK_SIZE; if (blocks || enc_after) - __aes_arm64_encrypt(ctx->key_enc, dg, dg, - rounds); + aes_encrypt(ctx, dg, dg); } } } @@ -837,5 +1071,7 @@ module_cpu_feature_match(AES, aes_init); module_init(aes_init); EXPORT_SYMBOL(neon_aes_ecb_encrypt); EXPORT_SYMBOL(neon_aes_cbc_encrypt); +EXPORT_SYMBOL(neon_aes_xts_encrypt); +EXPORT_SYMBOL(neon_aes_xts_decrypt); #endif module_exit(aes_exit); diff --git a/arch/arm64/crypto/aes-modes.S b/arch/arm64/crypto/aes-modes.S index 2883def14be5..131618389f1f 100644 --- a/arch/arm64/crypto/aes-modes.S +++ b/arch/arm64/crypto/aes-modes.S @@ -10,6 +10,18 @@ .text .align 4 +#ifndef MAX_STRIDE +#define MAX_STRIDE 4 +#endif + +#if MAX_STRIDE == 4 +#define ST4(x...) x +#define ST5(x...) +#else +#define ST4(x...) +#define ST5(x...) x +#endif + aes_encrypt_block4x: encrypt_block4x v0, v1, v2, v3, w3, x2, x8, w7 ret @@ -20,6 +32,18 @@ aes_decrypt_block4x: ret ENDPROC(aes_decrypt_block4x) +#if MAX_STRIDE == 5 +aes_encrypt_block5x: + encrypt_block5x v0, v1, v2, v3, v4, w3, x2, x8, w7 + ret +ENDPROC(aes_encrypt_block5x) + +aes_decrypt_block5x: + decrypt_block5x v0, v1, v2, v3, v4, w3, x2, x8, w7 + ret +ENDPROC(aes_decrypt_block5x) +#endif + /* * aes_ecb_encrypt(u8 out[], u8 const in[], u8 const rk[], int rounds, * int blocks) @@ -34,14 +58,17 @@ AES_ENTRY(aes_ecb_encrypt) enc_prepare w3, x2, x5 .LecbencloopNx: - subs w4, w4, #4 + subs w4, w4, #MAX_STRIDE bmi .Lecbenc1x ld1 {v0.16b-v3.16b}, [x1], #64 /* get 4 pt blocks */ - bl aes_encrypt_block4x +ST4( bl aes_encrypt_block4x ) +ST5( ld1 {v4.16b}, [x1], #16 ) +ST5( bl aes_encrypt_block5x ) st1 {v0.16b-v3.16b}, [x0], #64 +ST5( st1 {v4.16b}, [x0], #16 ) b .LecbencloopNx .Lecbenc1x: - adds w4, w4, #4 + adds w4, w4, #MAX_STRIDE beq .Lecbencout .Lecbencloop: ld1 {v0.16b}, [x1], #16 /* get next pt block */ @@ -62,14 +89,17 @@ AES_ENTRY(aes_ecb_decrypt) dec_prepare w3, x2, x5 .LecbdecloopNx: - subs w4, w4, #4 + subs w4, w4, #MAX_STRIDE bmi .Lecbdec1x ld1 {v0.16b-v3.16b}, [x1], #64 /* get 4 ct blocks */ - bl aes_decrypt_block4x +ST4( bl aes_decrypt_block4x ) +ST5( ld1 {v4.16b}, [x1], #16 ) +ST5( bl aes_decrypt_block5x ) st1 {v0.16b-v3.16b}, [x0], #64 +ST5( st1 {v4.16b}, [x0], #16 ) b .LecbdecloopNx .Lecbdec1x: - adds w4, w4, #4 + adds w4, w4, #MAX_STRIDE beq .Lecbdecout .Lecbdecloop: ld1 {v0.16b}, [x1], #16 /* get next ct block */ @@ -88,8 +118,23 @@ AES_ENDPROC(aes_ecb_decrypt) * int blocks, u8 iv[]) * aes_cbc_decrypt(u8 out[], u8 const in[], u8 const rk[], int rounds, * int blocks, u8 iv[]) + * aes_essiv_cbc_encrypt(u8 out[], u8 const in[], u32 const rk1[], + * int rounds, int blocks, u8 iv[], + * u32 const rk2[]); + * aes_essiv_cbc_decrypt(u8 out[], u8 const in[], u32 const rk1[], + * int rounds, int blocks, u8 iv[], + * u32 const rk2[]); */ +AES_ENTRY(aes_essiv_cbc_encrypt) + ld1 {v4.16b}, [x5] /* get iv */ + + mov w8, #14 /* AES-256: 14 rounds */ + enc_prepare w8, x6, x7 + encrypt_block v4, w8, x6, x7, w9 + enc_switch_key w3, x2, x6 + b .Lcbcencloop4x + AES_ENTRY(aes_cbc_encrypt) ld1 {v4.16b}, [x5] /* get iv */ enc_prepare w3, x2, x6 @@ -123,48 +168,78 @@ AES_ENTRY(aes_cbc_encrypt) st1 {v4.16b}, [x5] /* return iv */ ret AES_ENDPROC(aes_cbc_encrypt) +AES_ENDPROC(aes_essiv_cbc_encrypt) + +AES_ENTRY(aes_essiv_cbc_decrypt) + stp x29, x30, [sp, #-16]! + mov x29, sp + ld1 {cbciv.16b}, [x5] /* get iv */ + + mov w8, #14 /* AES-256: 14 rounds */ + enc_prepare w8, x6, x7 + encrypt_block cbciv, w8, x6, x7, w9 + b .Lessivcbcdecstart AES_ENTRY(aes_cbc_decrypt) stp x29, x30, [sp, #-16]! mov x29, sp - ld1 {v7.16b}, [x5] /* get iv */ + ld1 {cbciv.16b}, [x5] /* get iv */ +.Lessivcbcdecstart: dec_prepare w3, x2, x6 .LcbcdecloopNx: - subs w4, w4, #4 + subs w4, w4, #MAX_STRIDE bmi .Lcbcdec1x ld1 {v0.16b-v3.16b}, [x1], #64 /* get 4 ct blocks */ +#if MAX_STRIDE == 5 + ld1 {v4.16b}, [x1], #16 /* get 1 ct block */ + mov v5.16b, v0.16b + mov v6.16b, v1.16b + mov v7.16b, v2.16b + bl aes_decrypt_block5x + sub x1, x1, #32 + eor v0.16b, v0.16b, cbciv.16b + eor v1.16b, v1.16b, v5.16b + ld1 {v5.16b}, [x1], #16 /* reload 1 ct block */ + ld1 {cbciv.16b}, [x1], #16 /* reload 1 ct block */ + eor v2.16b, v2.16b, v6.16b + eor v3.16b, v3.16b, v7.16b + eor v4.16b, v4.16b, v5.16b +#else mov v4.16b, v0.16b mov v5.16b, v1.16b mov v6.16b, v2.16b bl aes_decrypt_block4x sub x1, x1, #16 - eor v0.16b, v0.16b, v7.16b + eor v0.16b, v0.16b, cbciv.16b eor v1.16b, v1.16b, v4.16b - ld1 {v7.16b}, [x1], #16 /* reload 1 ct block */ + ld1 {cbciv.16b}, [x1], #16 /* reload 1 ct block */ eor v2.16b, v2.16b, v5.16b eor v3.16b, v3.16b, v6.16b +#endif st1 {v0.16b-v3.16b}, [x0], #64 +ST5( st1 {v4.16b}, [x0], #16 ) b .LcbcdecloopNx .Lcbcdec1x: - adds w4, w4, #4 + adds w4, w4, #MAX_STRIDE beq .Lcbcdecout .Lcbcdecloop: ld1 {v1.16b}, [x1], #16 /* get next ct block */ mov v0.16b, v1.16b /* ...and copy to v0 */ decrypt_block v0, w3, x2, x6, w7 - eor v0.16b, v0.16b, v7.16b /* xor with iv => pt */ - mov v7.16b, v1.16b /* ct is next iv */ + eor v0.16b, v0.16b, cbciv.16b /* xor with iv => pt */ + mov cbciv.16b, v1.16b /* ct is next iv */ st1 {v0.16b}, [x0], #16 subs w4, w4, #1 bne .Lcbcdecloop .Lcbcdecout: - st1 {v7.16b}, [x5] /* return iv */ + st1 {cbciv.16b}, [x5] /* return iv */ ldp x29, x30, [sp], #16 ret AES_ENDPROC(aes_cbc_decrypt) +AES_ENDPROC(aes_essiv_cbc_decrypt) /* @@ -218,12 +293,11 @@ AES_ENTRY(aes_cbc_cts_decrypt) ld1 {v5.16b}, [x5] /* get iv */ dec_prepare w3, x2, x6 - tbl v2.16b, {v1.16b}, v4.16b decrypt_block v0, w3, x2, x6, w7 - eor v2.16b, v2.16b, v0.16b + tbl v2.16b, {v0.16b}, v3.16b + eor v2.16b, v2.16b, v1.16b tbx v0.16b, {v1.16b}, v4.16b - tbl v2.16b, {v2.16b}, v3.16b decrypt_block v0, w3, x2, x6, w7 eor v0.16b, v0.16b, v5.16b /* xor with iv */ @@ -255,51 +329,60 @@ AES_ENTRY(aes_ctr_encrypt) mov x29, sp enc_prepare w3, x2, x6 - ld1 {v4.16b}, [x5] + ld1 {vctr.16b}, [x5] - umov x6, v4.d[1] /* keep swabbed ctr in reg */ + umov x6, vctr.d[1] /* keep swabbed ctr in reg */ rev x6, x6 cmn w6, w4 /* 32 bit overflow? */ bcs .Lctrloop .LctrloopNx: - subs w4, w4, #4 + subs w4, w4, #MAX_STRIDE bmi .Lctr1x add w7, w6, #1 - mov v0.16b, v4.16b + mov v0.16b, vctr.16b add w8, w6, #2 - mov v1.16b, v4.16b + mov v1.16b, vctr.16b + add w9, w6, #3 + mov v2.16b, vctr.16b add w9, w6, #3 - mov v2.16b, v4.16b rev w7, w7 - mov v3.16b, v4.16b + mov v3.16b, vctr.16b rev w8, w8 +ST5( mov v4.16b, vctr.16b ) mov v1.s[3], w7 rev w9, w9 +ST5( add w10, w6, #4 ) mov v2.s[3], w8 +ST5( rev w10, w10 ) mov v3.s[3], w9 +ST5( mov v4.s[3], w10 ) ld1 {v5.16b-v7.16b}, [x1], #48 /* get 3 input blocks */ - bl aes_encrypt_block4x +ST4( bl aes_encrypt_block4x ) +ST5( bl aes_encrypt_block5x ) eor v0.16b, v5.16b, v0.16b - ld1 {v5.16b}, [x1], #16 /* get 1 input block */ +ST4( ld1 {v5.16b}, [x1], #16 ) eor v1.16b, v6.16b, v1.16b +ST5( ld1 {v5.16b-v6.16b}, [x1], #32 ) eor v2.16b, v7.16b, v2.16b eor v3.16b, v5.16b, v3.16b +ST5( eor v4.16b, v6.16b, v4.16b ) st1 {v0.16b-v3.16b}, [x0], #64 - add x6, x6, #4 +ST5( st1 {v4.16b}, [x0], #16 ) + add x6, x6, #MAX_STRIDE rev x7, x6 - ins v4.d[1], x7 + ins vctr.d[1], x7 cbz w4, .Lctrout b .LctrloopNx .Lctr1x: - adds w4, w4, #4 + adds w4, w4, #MAX_STRIDE beq .Lctrout .Lctrloop: - mov v0.16b, v4.16b + mov v0.16b, vctr.16b encrypt_block v0, w3, x2, x8, w7 adds x6, x6, #1 /* increment BE ctr */ rev x7, x6 - ins v4.d[1], x7 + ins vctr.d[1], x7 bcs .Lctrcarry /* overflow? */ .Lctrcarrydone: @@ -311,7 +394,7 @@ AES_ENTRY(aes_ctr_encrypt) bne .Lctrloop .Lctrout: - st1 {v4.16b}, [x5] /* return next CTR value */ + st1 {vctr.16b}, [x5] /* return next CTR value */ ldp x29, x30, [sp], #16 ret @@ -320,20 +403,20 @@ AES_ENTRY(aes_ctr_encrypt) b .Lctrout .Lctrcarry: - umov x7, v4.d[0] /* load upper word of ctr */ + umov x7, vctr.d[0] /* load upper word of ctr */ rev x7, x7 /* ... to handle the carry */ add x7, x7, #1 rev x7, x7 - ins v4.d[0], x7 + ins vctr.d[0], x7 b .Lctrcarrydone AES_ENDPROC(aes_ctr_encrypt) /* + * aes_xts_encrypt(u8 out[], u8 const in[], u8 const rk1[], int rounds, + * int bytes, u8 const rk2[], u8 iv[], int first) * aes_xts_decrypt(u8 out[], u8 const in[], u8 const rk1[], int rounds, - * int blocks, u8 const rk2[], u8 iv[], int first) - * aes_xts_decrypt(u8 out[], u8 const in[], u8 const rk1[], int rounds, - * int blocks, u8 const rk2[], u8 iv[], int first) + * int bytes, u8 const rk2[], u8 iv[], int first) */ .macro next_tweak, out, in, tmp @@ -359,6 +442,7 @@ AES_ENTRY(aes_xts_encrypt) cbz w7, .Lxtsencnotfirst enc_prepare w3, x5, x8 + xts_cts_skip_tw w7, .LxtsencNx encrypt_block v4, w3, x5, x8, w7 /* first tweak */ enc_switch_key w3, x2, x8 b .LxtsencNx @@ -368,7 +452,7 @@ AES_ENTRY(aes_xts_encrypt) .LxtsencloopNx: next_tweak v4, v4, v8 .LxtsencNx: - subs w4, w4, #4 + subs w4, w4, #64 bmi .Lxtsenc1x ld1 {v0.16b-v3.16b}, [x1], #64 /* get 4 pt blocks */ next_tweak v5, v4, v8 @@ -385,39 +469,74 @@ AES_ENTRY(aes_xts_encrypt) eor v2.16b, v2.16b, v6.16b st1 {v0.16b-v3.16b}, [x0], #64 mov v4.16b, v7.16b - cbz w4, .Lxtsencout + cbz w4, .Lxtsencret xts_reload_mask v8 b .LxtsencloopNx .Lxtsenc1x: - adds w4, w4, #4 + adds w4, w4, #64 beq .Lxtsencout + subs w4, w4, #16 + bmi .LxtsencctsNx .Lxtsencloop: - ld1 {v1.16b}, [x1], #16 - eor v0.16b, v1.16b, v4.16b + ld1 {v0.16b}, [x1], #16 +.Lxtsencctsout: + eor v0.16b, v0.16b, v4.16b encrypt_block v0, w3, x2, x8, w7 eor v0.16b, v0.16b, v4.16b - st1 {v0.16b}, [x0], #16 - subs w4, w4, #1 - beq .Lxtsencout + cbz w4, .Lxtsencout + subs w4, w4, #16 next_tweak v4, v4, v8 + bmi .Lxtsenccts + st1 {v0.16b}, [x0], #16 b .Lxtsencloop .Lxtsencout: + st1 {v0.16b}, [x0] +.Lxtsencret: st1 {v4.16b}, [x6] ldp x29, x30, [sp], #16 ret -AES_ENDPROC(aes_xts_encrypt) +.LxtsencctsNx: + mov v0.16b, v3.16b + sub x0, x0, #16 +.Lxtsenccts: + adr_l x8, .Lcts_permute_table + + add x1, x1, w4, sxtw /* rewind input pointer */ + add w4, w4, #16 /* # bytes in final block */ + add x9, x8, #32 + add x8, x8, x4 + sub x9, x9, x4 + add x4, x0, x4 /* output address of final block */ + + ld1 {v1.16b}, [x1] /* load final block */ + ld1 {v2.16b}, [x8] + ld1 {v3.16b}, [x9] + + tbl v2.16b, {v0.16b}, v2.16b + tbx v0.16b, {v1.16b}, v3.16b + st1 {v2.16b}, [x4] /* overlapping stores */ + mov w4, wzr + b .Lxtsencctsout +AES_ENDPROC(aes_xts_encrypt) AES_ENTRY(aes_xts_decrypt) stp x29, x30, [sp, #-16]! mov x29, sp + /* subtract 16 bytes if we are doing CTS */ + sub w8, w4, #0x10 + tst w4, #0xf + csel w4, w4, w8, eq + ld1 {v4.16b}, [x6] xts_load_mask v8 + xts_cts_skip_tw w7, .Lxtsdecskiptw cbz w7, .Lxtsdecnotfirst enc_prepare w3, x5, x8 encrypt_block v4, w3, x5, x8, w7 /* first tweak */ +.Lxtsdecskiptw: dec_prepare w3, x2, x8 b .LxtsdecNx @@ -426,7 +545,7 @@ AES_ENTRY(aes_xts_decrypt) .LxtsdecloopNx: next_tweak v4, v4, v8 .LxtsdecNx: - subs w4, w4, #4 + subs w4, w4, #64 bmi .Lxtsdec1x ld1 {v0.16b-v3.16b}, [x1], #64 /* get 4 ct blocks */ next_tweak v5, v4, v8 @@ -447,22 +566,52 @@ AES_ENTRY(aes_xts_decrypt) xts_reload_mask v8 b .LxtsdecloopNx .Lxtsdec1x: - adds w4, w4, #4 + adds w4, w4, #64 beq .Lxtsdecout + subs w4, w4, #16 .Lxtsdecloop: - ld1 {v1.16b}, [x1], #16 - eor v0.16b, v1.16b, v4.16b + ld1 {v0.16b}, [x1], #16 + bmi .Lxtsdeccts +.Lxtsdecctsout: + eor v0.16b, v0.16b, v4.16b decrypt_block v0, w3, x2, x8, w7 eor v0.16b, v0.16b, v4.16b st1 {v0.16b}, [x0], #16 - subs w4, w4, #1 - beq .Lxtsdecout + cbz w4, .Lxtsdecout + subs w4, w4, #16 next_tweak v4, v4, v8 b .Lxtsdecloop .Lxtsdecout: st1 {v4.16b}, [x6] ldp x29, x30, [sp], #16 ret + +.Lxtsdeccts: + adr_l x8, .Lcts_permute_table + + add x1, x1, w4, sxtw /* rewind input pointer */ + add w4, w4, #16 /* # bytes in final block */ + add x9, x8, #32 + add x8, x8, x4 + sub x9, x9, x4 + add x4, x0, x4 /* output address of final block */ + + next_tweak v5, v4, v8 + + ld1 {v1.16b}, [x1] /* load final block */ + ld1 {v2.16b}, [x8] + ld1 {v3.16b}, [x9] + + eor v0.16b, v0.16b, v5.16b + decrypt_block v0, w3, x2, x8, w7 + eor v0.16b, v0.16b, v5.16b + + tbl v2.16b, {v0.16b}, v2.16b + tbx v0.16b, {v1.16b}, v3.16b + + st1 {v2.16b}, [x4] /* overlapping stores */ + mov w4, wzr + b .Lxtsdecctsout AES_ENDPROC(aes_xts_decrypt) /* diff --git a/arch/arm64/crypto/aes-neon.S b/arch/arm64/crypto/aes-neon.S index d261331747f2..22d9b110cf78 100644 --- a/arch/arm64/crypto/aes-neon.S +++ b/arch/arm64/crypto/aes-neon.S @@ -12,11 +12,18 @@ #define AES_ENDPROC(func) ENDPROC(neon_ ## func) xtsmask .req v7 + cbciv .req v7 + vctr .req v4 .macro xts_reload_mask, tmp xts_load_mask \tmp .endm + /* special case for the neon-bs driver calling into this one for CTS */ + .macro xts_cts_skip_tw, reg, lbl + tbnz \reg, #1, \lbl + .endm + /* multiply by polynomial 'x' in GF(2^8) */ .macro mul_by_x, out, in, temp, const sshr \temp, \in, #7 @@ -47,7 +54,7 @@ /* do preload for encryption */ .macro enc_prepare, ignore0, ignore1, temp - prepare .LForward_Sbox, .LForward_ShiftRows, \temp + prepare crypto_aes_sbox, .LForward_ShiftRows, \temp .endm .macro enc_switch_key, ignore0, ignore1, temp @@ -56,7 +63,7 @@ /* do preload for decryption */ .macro dec_prepare, ignore0, ignore1, temp - prepare .LReverse_Sbox, .LReverse_ShiftRows, \temp + prepare crypto_aes_inv_sbox, .LReverse_ShiftRows, \temp .endm /* apply SubBytes transformation using the the preloaded Sbox */ @@ -114,26 +121,9 @@ /* * Interleaved versions: functionally equivalent to the - * ones above, but applied to 2 or 4 AES states in parallel. + * ones above, but applied to AES states in parallel. */ - .macro sub_bytes_2x, in0, in1 - sub v8.16b, \in0\().16b, v15.16b - tbl \in0\().16b, {v16.16b-v19.16b}, \in0\().16b - sub v9.16b, \in1\().16b, v15.16b - tbl \in1\().16b, {v16.16b-v19.16b}, \in1\().16b - sub v10.16b, v8.16b, v15.16b - tbx \in0\().16b, {v20.16b-v23.16b}, v8.16b - sub v11.16b, v9.16b, v15.16b - tbx \in1\().16b, {v20.16b-v23.16b}, v9.16b - sub v8.16b, v10.16b, v15.16b - tbx \in0\().16b, {v24.16b-v27.16b}, v10.16b - sub v9.16b, v11.16b, v15.16b - tbx \in1\().16b, {v24.16b-v27.16b}, v11.16b - tbx \in0\().16b, {v28.16b-v31.16b}, v8.16b - tbx \in1\().16b, {v28.16b-v31.16b}, v9.16b - .endm - .macro sub_bytes_4x, in0, in1, in2, in3 sub v8.16b, \in0\().16b, v15.16b tbl \in0\().16b, {v16.16b-v19.16b}, \in0\().16b @@ -212,25 +202,6 @@ eor \in1\().16b, \in1\().16b, v11.16b .endm - .macro do_block_2x, enc, in0, in1, rounds, rk, rkp, i - ld1 {v15.4s}, [\rk] - add \rkp, \rk, #16 - mov \i, \rounds -1111: eor \in0\().16b, \in0\().16b, v15.16b /* ^round key */ - eor \in1\().16b, \in1\().16b, v15.16b /* ^round key */ - movi v15.16b, #0x40 - tbl \in0\().16b, {\in0\().16b}, v13.16b /* ShiftRows */ - tbl \in1\().16b, {\in1\().16b}, v13.16b /* ShiftRows */ - sub_bytes_2x \in0, \in1 - subs \i, \i, #1 - ld1 {v15.4s}, [\rkp], #16 - beq 2222f - mix_columns_2x \in0, \in1, \enc - b 1111b -2222: eor \in0\().16b, \in0\().16b, v15.16b /* ^round key */ - eor \in1\().16b, \in1\().16b, v15.16b /* ^round key */ - .endm - .macro do_block_4x, enc, in0, in1, in2, in3, rounds, rk, rkp, i ld1 {v15.4s}, [\rk] add \rkp, \rk, #16 @@ -257,14 +228,6 @@ eor \in3\().16b, \in3\().16b, v15.16b /* ^round key */ .endm - .macro encrypt_block2x, in0, in1, rounds, rk, rkp, i - do_block_2x 1, \in0, \in1, \rounds, \rk, \rkp, \i - .endm - - .macro decrypt_block2x, in0, in1, rounds, rk, rkp, i - do_block_2x 0, \in0, \in1, \rounds, \rk, \rkp, \i - .endm - .macro encrypt_block4x, in0, in1, in2, in3, rounds, rk, rkp, i do_block_4x 1, \in0, \in1, \in2, \in3, \rounds, \rk, \rkp, \i .endm @@ -276,75 +239,7 @@ #include "aes-modes.S" .section ".rodata", "a" - .align 6 -.LForward_Sbox: - .byte 0x63, 0x7c, 0x77, 0x7b, 0xf2, 0x6b, 0x6f, 0xc5 - .byte 0x30, 0x01, 0x67, 0x2b, 0xfe, 0xd7, 0xab, 0x76 - .byte 0xca, 0x82, 0xc9, 0x7d, 0xfa, 0x59, 0x47, 0xf0 - .byte 0xad, 0xd4, 0xa2, 0xaf, 0x9c, 0xa4, 0x72, 0xc0 - .byte 0xb7, 0xfd, 0x93, 0x26, 0x36, 0x3f, 0xf7, 0xcc - .byte 0x34, 0xa5, 0xe5, 0xf1, 0x71, 0xd8, 0x31, 0x15 - .byte 0x04, 0xc7, 0x23, 0xc3, 0x18, 0x96, 0x05, 0x9a - .byte 0x07, 0x12, 0x80, 0xe2, 0xeb, 0x27, 0xb2, 0x75 - .byte 0x09, 0x83, 0x2c, 0x1a, 0x1b, 0x6e, 0x5a, 0xa0 - .byte 0x52, 0x3b, 0xd6, 0xb3, 0x29, 0xe3, 0x2f, 0x84 - .byte 0x53, 0xd1, 0x00, 0xed, 0x20, 0xfc, 0xb1, 0x5b - .byte 0x6a, 0xcb, 0xbe, 0x39, 0x4a, 0x4c, 0x58, 0xcf - .byte 0xd0, 0xef, 0xaa, 0xfb, 0x43, 0x4d, 0x33, 0x85 - .byte 0x45, 0xf9, 0x02, 0x7f, 0x50, 0x3c, 0x9f, 0xa8 - .byte 0x51, 0xa3, 0x40, 0x8f, 0x92, 0x9d, 0x38, 0xf5 - .byte 0xbc, 0xb6, 0xda, 0x21, 0x10, 0xff, 0xf3, 0xd2 - .byte 0xcd, 0x0c, 0x13, 0xec, 0x5f, 0x97, 0x44, 0x17 - .byte 0xc4, 0xa7, 0x7e, 0x3d, 0x64, 0x5d, 0x19, 0x73 - .byte 0x60, 0x81, 0x4f, 0xdc, 0x22, 0x2a, 0x90, 0x88 - .byte 0x46, 0xee, 0xb8, 0x14, 0xde, 0x5e, 0x0b, 0xdb - .byte 0xe0, 0x32, 0x3a, 0x0a, 0x49, 0x06, 0x24, 0x5c - .byte 0xc2, 0xd3, 0xac, 0x62, 0x91, 0x95, 0xe4, 0x79 - .byte 0xe7, 0xc8, 0x37, 0x6d, 0x8d, 0xd5, 0x4e, 0xa9 - .byte 0x6c, 0x56, 0xf4, 0xea, 0x65, 0x7a, 0xae, 0x08 - .byte 0xba, 0x78, 0x25, 0x2e, 0x1c, 0xa6, 0xb4, 0xc6 - .byte 0xe8, 0xdd, 0x74, 0x1f, 0x4b, 0xbd, 0x8b, 0x8a - .byte 0x70, 0x3e, 0xb5, 0x66, 0x48, 0x03, 0xf6, 0x0e - .byte 0x61, 0x35, 0x57, 0xb9, 0x86, 0xc1, 0x1d, 0x9e - .byte 0xe1, 0xf8, 0x98, 0x11, 0x69, 0xd9, 0x8e, 0x94 - .byte 0x9b, 0x1e, 0x87, 0xe9, 0xce, 0x55, 0x28, 0xdf - .byte 0x8c, 0xa1, 0x89, 0x0d, 0xbf, 0xe6, 0x42, 0x68 - .byte 0x41, 0x99, 0x2d, 0x0f, 0xb0, 0x54, 0xbb, 0x16 - -.LReverse_Sbox: - .byte 0x52, 0x09, 0x6a, 0xd5, 0x30, 0x36, 0xa5, 0x38 - .byte 0xbf, 0x40, 0xa3, 0x9e, 0x81, 0xf3, 0xd7, 0xfb - .byte 0x7c, 0xe3, 0x39, 0x82, 0x9b, 0x2f, 0xff, 0x87 - .byte 0x34, 0x8e, 0x43, 0x44, 0xc4, 0xde, 0xe9, 0xcb - .byte 0x54, 0x7b, 0x94, 0x32, 0xa6, 0xc2, 0x23, 0x3d - .byte 0xee, 0x4c, 0x95, 0x0b, 0x42, 0xfa, 0xc3, 0x4e - .byte 0x08, 0x2e, 0xa1, 0x66, 0x28, 0xd9, 0x24, 0xb2 - .byte 0x76, 0x5b, 0xa2, 0x49, 0x6d, 0x8b, 0xd1, 0x25 - .byte 0x72, 0xf8, 0xf6, 0x64, 0x86, 0x68, 0x98, 0x16 - .byte 0xd4, 0xa4, 0x5c, 0xcc, 0x5d, 0x65, 0xb6, 0x92 - .byte 0x6c, 0x70, 0x48, 0x50, 0xfd, 0xed, 0xb9, 0xda - .byte 0x5e, 0x15, 0x46, 0x57, 0xa7, 0x8d, 0x9d, 0x84 - .byte 0x90, 0xd8, 0xab, 0x00, 0x8c, 0xbc, 0xd3, 0x0a - .byte 0xf7, 0xe4, 0x58, 0x05, 0xb8, 0xb3, 0x45, 0x06 - .byte 0xd0, 0x2c, 0x1e, 0x8f, 0xca, 0x3f, 0x0f, 0x02 - .byte 0xc1, 0xaf, 0xbd, 0x03, 0x01, 0x13, 0x8a, 0x6b - .byte 0x3a, 0x91, 0x11, 0x41, 0x4f, 0x67, 0xdc, 0xea - .byte 0x97, 0xf2, 0xcf, 0xce, 0xf0, 0xb4, 0xe6, 0x73 - .byte 0x96, 0xac, 0x74, 0x22, 0xe7, 0xad, 0x35, 0x85 - .byte 0xe2, 0xf9, 0x37, 0xe8, 0x1c, 0x75, 0xdf, 0x6e - .byte 0x47, 0xf1, 0x1a, 0x71, 0x1d, 0x29, 0xc5, 0x89 - .byte 0x6f, 0xb7, 0x62, 0x0e, 0xaa, 0x18, 0xbe, 0x1b - .byte 0xfc, 0x56, 0x3e, 0x4b, 0xc6, 0xd2, 0x79, 0x20 - .byte 0x9a, 0xdb, 0xc0, 0xfe, 0x78, 0xcd, 0x5a, 0xf4 - .byte 0x1f, 0xdd, 0xa8, 0x33, 0x88, 0x07, 0xc7, 0x31 - .byte 0xb1, 0x12, 0x10, 0x59, 0x27, 0x80, 0xec, 0x5f - .byte 0x60, 0x51, 0x7f, 0xa9, 0x19, 0xb5, 0x4a, 0x0d - .byte 0x2d, 0xe5, 0x7a, 0x9f, 0x93, 0xc9, 0x9c, 0xef - .byte 0xa0, 0xe0, 0x3b, 0x4d, 0xae, 0x2a, 0xf5, 0xb0 - .byte 0xc8, 0xeb, 0xbb, 0x3c, 0x83, 0x53, 0x99, 0x61 - .byte 0x17, 0x2b, 0x04, 0x7e, 0xba, 0x77, 0xd6, 0x26 - .byte 0xe1, 0x69, 0x14, 0x63, 0x55, 0x21, 0x0c, 0x7d - + .align 4 .LForward_ShiftRows: .octa 0x0b06010c07020d08030e09040f0a0500 diff --git a/arch/arm64/crypto/aes-neonbs-core.S b/arch/arm64/crypto/aes-neonbs-core.S index cf10ff8878a3..65982039fa36 100644 --- a/arch/arm64/crypto/aes-neonbs-core.S +++ b/arch/arm64/crypto/aes-neonbs-core.S @@ -730,11 +730,6 @@ ENDPROC(aesbs_cbc_decrypt) eor \out\().16b, \out\().16b, \tmp\().16b .endm - .align 4 -.Lxts_mul_x: -CPU_LE( .quad 1, 0x87 ) -CPU_BE( .quad 0x87, 1 ) - /* * aesbs_xts_encrypt(u8 out[], u8 const in[], u8 const rk[], int rounds, * int blocks, u8 iv[]) @@ -806,7 +801,9 @@ ENDPROC(__xts_crypt8) mov x23, x4 mov x24, x5 -0: ldr q30, .Lxts_mul_x +0: movi v30.2s, #0x1 + movi v25.2s, #0x87 + uzp1 v30.4s, v30.4s, v25.4s ld1 {v25.16b}, [x24] 99: adr x7, \do8 diff --git a/arch/arm64/crypto/aes-neonbs-glue.c b/arch/arm64/crypto/aes-neonbs-glue.c index 281d23087697..ea873b8904c4 100644 --- a/arch/arm64/crypto/aes-neonbs-glue.c +++ b/arch/arm64/crypto/aes-neonbs-glue.c @@ -8,13 +8,13 @@ #include <asm/neon.h> #include <asm/simd.h> #include <crypto/aes.h> +#include <crypto/ctr.h> #include <crypto/internal/simd.h> #include <crypto/internal/skcipher.h> +#include <crypto/scatterwalk.h> #include <crypto/xts.h> #include <linux/module.h> -#include "aes-ctr-fallback.h" - MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>"); MODULE_LICENSE("GPL v2"); @@ -46,6 +46,12 @@ asmlinkage void neon_aes_ecb_encrypt(u8 out[], u8 const in[], u32 const rk[], int rounds, int blocks); asmlinkage void neon_aes_cbc_encrypt(u8 out[], u8 const in[], u32 const rk[], int rounds, int blocks, u8 iv[]); +asmlinkage void neon_aes_xts_encrypt(u8 out[], u8 const in[], + u32 const rk1[], int rounds, int bytes, + u32 const rk2[], u8 iv[], int first); +asmlinkage void neon_aes_xts_decrypt(u8 out[], u8 const in[], + u32 const rk1[], int rounds, int bytes, + u32 const rk2[], u8 iv[], int first); struct aesbs_ctx { u8 rk[13 * (8 * AES_BLOCK_SIZE) + 32]; @@ -65,6 +71,7 @@ struct aesbs_ctr_ctx { struct aesbs_xts_ctx { struct aesbs_ctx key; u32 twkey[AES_MAX_KEYLENGTH_U32]; + struct crypto_aes_ctx cts; }; static int aesbs_setkey(struct crypto_skcipher *tfm, const u8 *in_key, @@ -74,7 +81,7 @@ static int aesbs_setkey(struct crypto_skcipher *tfm, const u8 *in_key, struct crypto_aes_ctx rk; int err; - err = crypto_aes_expand_key(&rk, in_key, key_len); + err = aes_expandkey(&rk, in_key, key_len); if (err) return err; @@ -133,7 +140,7 @@ static int aesbs_cbc_setkey(struct crypto_skcipher *tfm, const u8 *in_key, struct crypto_aes_ctx rk; int err; - err = crypto_aes_expand_key(&rk, in_key, key_len); + err = aes_expandkey(&rk, in_key, key_len); if (err) return err; @@ -205,7 +212,7 @@ static int aesbs_ctr_setkey_sync(struct crypto_skcipher *tfm, const u8 *in_key, struct aesbs_ctr_ctx *ctx = crypto_skcipher_ctx(tfm); int err; - err = crypto_aes_expand_key(&ctx->fallback, in_key, key_len); + err = aes_expandkey(&ctx->fallback, in_key, key_len); if (err) return err; @@ -271,7 +278,11 @@ static int aesbs_xts_setkey(struct crypto_skcipher *tfm, const u8 *in_key, return err; key_len /= 2; - err = crypto_aes_expand_key(&rk, in_key + key_len, key_len); + err = aes_expandkey(&ctx->cts, in_key, key_len); + if (err) + return err; + + err = aes_expandkey(&rk, in_key + key_len, key_len); if (err) return err; @@ -280,59 +291,142 @@ static int aesbs_xts_setkey(struct crypto_skcipher *tfm, const u8 *in_key, return aesbs_setkey(tfm, in_key, key_len); } -static int ctr_encrypt_sync(struct skcipher_request *req) +static void ctr_encrypt_one(struct crypto_skcipher *tfm, const u8 *src, u8 *dst) { - struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); struct aesbs_ctr_ctx *ctx = crypto_skcipher_ctx(tfm); + unsigned long flags; + + /* + * Temporarily disable interrupts to avoid races where + * cachelines are evicted when the CPU is interrupted + * to do something else. + */ + local_irq_save(flags); + aes_encrypt(&ctx->fallback, dst, src); + local_irq_restore(flags); +} +static int ctr_encrypt_sync(struct skcipher_request *req) +{ if (!crypto_simd_usable()) - return aes_ctr_encrypt_fallback(&ctx->fallback, req); + return crypto_ctr_encrypt_walk(req, ctr_encrypt_one); return ctr_encrypt(req); } -static int __xts_crypt(struct skcipher_request *req, +static int __xts_crypt(struct skcipher_request *req, bool encrypt, void (*fn)(u8 out[], u8 const in[], u8 const rk[], int rounds, int blocks, u8 iv[])) { struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); struct aesbs_xts_ctx *ctx = crypto_skcipher_ctx(tfm); + int tail = req->cryptlen % (8 * AES_BLOCK_SIZE); + struct scatterlist sg_src[2], sg_dst[2]; + struct skcipher_request subreq; + struct scatterlist *src, *dst; struct skcipher_walk walk; - int err; + int nbytes, err; + int first = 1; + u8 *out, *in; + + if (req->cryptlen < AES_BLOCK_SIZE) + return -EINVAL; + + /* ensure that the cts tail is covered by a single step */ + if (unlikely(tail > 0 && tail < AES_BLOCK_SIZE)) { + int xts_blocks = DIV_ROUND_UP(req->cryptlen, + AES_BLOCK_SIZE) - 2; + + skcipher_request_set_tfm(&subreq, tfm); + skcipher_request_set_callback(&subreq, + skcipher_request_flags(req), + NULL, NULL); + skcipher_request_set_crypt(&subreq, req->src, req->dst, + xts_blocks * AES_BLOCK_SIZE, + req->iv); + req = &subreq; + } else { + tail = 0; + } err = skcipher_walk_virt(&walk, req, false); if (err) return err; - kernel_neon_begin(); - neon_aes_ecb_encrypt(walk.iv, walk.iv, ctx->twkey, ctx->key.rounds, 1); - kernel_neon_end(); - while (walk.nbytes >= AES_BLOCK_SIZE) { unsigned int blocks = walk.nbytes / AES_BLOCK_SIZE; - if (walk.nbytes < walk.total) + if (walk.nbytes < walk.total || walk.nbytes % AES_BLOCK_SIZE) blocks = round_down(blocks, walk.stride / AES_BLOCK_SIZE); + out = walk.dst.virt.addr; + in = walk.src.virt.addr; + nbytes = walk.nbytes; + kernel_neon_begin(); - fn(walk.dst.virt.addr, walk.src.virt.addr, ctx->key.rk, - ctx->key.rounds, blocks, walk.iv); + if (likely(blocks > 6)) { /* plain NEON is faster otherwise */ + if (first) + neon_aes_ecb_encrypt(walk.iv, walk.iv, + ctx->twkey, + ctx->key.rounds, 1); + first = 0; + + fn(out, in, ctx->key.rk, ctx->key.rounds, blocks, + walk.iv); + + out += blocks * AES_BLOCK_SIZE; + in += blocks * AES_BLOCK_SIZE; + nbytes -= blocks * AES_BLOCK_SIZE; + } + + if (walk.nbytes == walk.total && nbytes > 0) + goto xts_tail; + kernel_neon_end(); - err = skcipher_walk_done(&walk, - walk.nbytes - blocks * AES_BLOCK_SIZE); + skcipher_walk_done(&walk, nbytes); } - return err; + + if (err || likely(!tail)) + return err; + + /* handle ciphertext stealing */ + dst = src = scatterwalk_ffwd(sg_src, req->src, req->cryptlen); + if (req->dst != req->src) + dst = scatterwalk_ffwd(sg_dst, req->dst, req->cryptlen); + + skcipher_request_set_crypt(req, src, dst, AES_BLOCK_SIZE + tail, + req->iv); + + err = skcipher_walk_virt(&walk, req, false); + if (err) + return err; + + out = walk.dst.virt.addr; + in = walk.src.virt.addr; + nbytes = walk.nbytes; + + kernel_neon_begin(); +xts_tail: + if (encrypt) + neon_aes_xts_encrypt(out, in, ctx->cts.key_enc, ctx->key.rounds, + nbytes, ctx->twkey, walk.iv, first ?: 2); + else + neon_aes_xts_decrypt(out, in, ctx->cts.key_dec, ctx->key.rounds, + nbytes, ctx->twkey, walk.iv, first ?: 2); + kernel_neon_end(); + + return skcipher_walk_done(&walk, 0); } static int xts_encrypt(struct skcipher_request *req) { - return __xts_crypt(req, aesbs_xts_encrypt); + return __xts_crypt(req, true, aesbs_xts_encrypt); } static int xts_decrypt(struct skcipher_request *req) { - return __xts_crypt(req, aesbs_xts_decrypt); + return __xts_crypt(req, false, aesbs_xts_decrypt); } static struct skcipher_alg aes_algs[] = { { diff --git a/arch/arm64/crypto/chacha-neon-glue.c b/arch/arm64/crypto/chacha-neon-glue.c index 82029cda2e77..1495d2b18518 100644 --- a/arch/arm64/crypto/chacha-neon-glue.c +++ b/arch/arm64/crypto/chacha-neon-glue.c @@ -60,7 +60,7 @@ static void chacha_doneon(u32 *state, u8 *dst, const u8 *src, } static int chacha_neon_stream_xor(struct skcipher_request *req, - struct chacha_ctx *ctx, u8 *iv) + const struct chacha_ctx *ctx, const u8 *iv) { struct skcipher_walk walk; u32 state[16]; diff --git a/arch/arm64/crypto/ghash-ce-glue.c b/arch/arm64/crypto/ghash-ce-glue.c index 16c5da9be9fb..70b1469783f9 100644 --- a/arch/arm64/crypto/ghash-ce-glue.c +++ b/arch/arm64/crypto/ghash-ce-glue.c @@ -70,8 +70,6 @@ asmlinkage void pmull_gcm_decrypt(int blocks, u64 dg[], u8 dst[], asmlinkage void pmull_gcm_encrypt_block(u8 dst[], u8 const src[], u32 const rk[], int rounds); -asmlinkage void __aes_arm64_encrypt(u32 *rk, u8 *out, const u8 *in, int rounds); - static int ghash_init(struct shash_desc *desc) { struct ghash_desc_ctx *ctx = shash_desc_ctx(desc); @@ -309,14 +307,13 @@ static int gcm_setkey(struct crypto_aead *tfm, const u8 *inkey, u8 key[GHASH_BLOCK_SIZE]; int ret; - ret = crypto_aes_expand_key(&ctx->aes_key, inkey, keylen); + ret = aes_expandkey(&ctx->aes_key, inkey, keylen); if (ret) { tfm->base.crt_flags |= CRYPTO_TFM_RES_BAD_KEY_LEN; return -EINVAL; } - __aes_arm64_encrypt(ctx->aes_key.key_enc, key, (u8[AES_BLOCK_SIZE]){}, - num_rounds(&ctx->aes_key)); + aes_encrypt(&ctx->aes_key, key, (u8[AES_BLOCK_SIZE]){}); return __ghash_setkey(&ctx->ghash_key, key, sizeof(be128)); } @@ -467,7 +464,7 @@ static int gcm_encrypt(struct aead_request *req) rk = ctx->aes_key.key_enc; } while (walk.nbytes >= 2 * AES_BLOCK_SIZE); } else { - __aes_arm64_encrypt(ctx->aes_key.key_enc, tag, iv, nrounds); + aes_encrypt(&ctx->aes_key, tag, iv); put_unaligned_be32(2, iv + GCM_IV_SIZE); while (walk.nbytes >= (2 * AES_BLOCK_SIZE)) { @@ -478,8 +475,7 @@ static int gcm_encrypt(struct aead_request *req) int remaining = blocks; do { - __aes_arm64_encrypt(ctx->aes_key.key_enc, - ks, iv, nrounds); + aes_encrypt(&ctx->aes_key, ks, iv); crypto_xor_cpy(dst, src, ks, AES_BLOCK_SIZE); crypto_inc(iv, AES_BLOCK_SIZE); @@ -495,13 +491,10 @@ static int gcm_encrypt(struct aead_request *req) walk.nbytes % (2 * AES_BLOCK_SIZE)); } if (walk.nbytes) { - __aes_arm64_encrypt(ctx->aes_key.key_enc, ks, iv, - nrounds); + aes_encrypt(&ctx->aes_key, ks, iv); if (walk.nbytes > AES_BLOCK_SIZE) { crypto_inc(iv, AES_BLOCK_SIZE); - __aes_arm64_encrypt(ctx->aes_key.key_enc, - ks + AES_BLOCK_SIZE, iv, - nrounds); + aes_encrypt(&ctx->aes_key, ks + AES_BLOCK_SIZE, iv); } } } @@ -605,7 +598,7 @@ static int gcm_decrypt(struct aead_request *req) rk = ctx->aes_key.key_enc; } while (walk.nbytes >= 2 * AES_BLOCK_SIZE); } else { - __aes_arm64_encrypt(ctx->aes_key.key_enc, tag, iv, nrounds); + aes_encrypt(&ctx->aes_key, tag, iv); put_unaligned_be32(2, iv + GCM_IV_SIZE); while (walk.nbytes >= (2 * AES_BLOCK_SIZE)) { @@ -618,8 +611,7 @@ static int gcm_decrypt(struct aead_request *req) pmull_ghash_update_p64); do { - __aes_arm64_encrypt(ctx->aes_key.key_enc, - buf, iv, nrounds); + aes_encrypt(&ctx->aes_key, buf, iv); crypto_xor_cpy(dst, src, buf, AES_BLOCK_SIZE); crypto_inc(iv, AES_BLOCK_SIZE); @@ -637,11 +629,9 @@ static int gcm_decrypt(struct aead_request *req) memcpy(iv2, iv, AES_BLOCK_SIZE); crypto_inc(iv2, AES_BLOCK_SIZE); - __aes_arm64_encrypt(ctx->aes_key.key_enc, iv2, - iv2, nrounds); + aes_encrypt(&ctx->aes_key, iv2, iv2); } - __aes_arm64_encrypt(ctx->aes_key.key_enc, iv, iv, - nrounds); + aes_encrypt(&ctx->aes_key, iv, iv); } } diff --git a/arch/arm64/crypto/sha1-ce-glue.c b/arch/arm64/crypto/sha1-ce-glue.c index ecb0f67e5998..bdc1b6d7aff7 100644 --- a/arch/arm64/crypto/sha1-ce-glue.c +++ b/arch/arm64/crypto/sha1-ce-glue.c @@ -52,7 +52,7 @@ static int sha1_ce_finup(struct shash_desc *desc, const u8 *data, unsigned int len, u8 *out) { struct sha1_ce_state *sctx = shash_desc_ctx(desc); - bool finalize = !sctx->sst.count && !(len % SHA1_BLOCK_SIZE); + bool finalize = !sctx->sst.count && !(len % SHA1_BLOCK_SIZE) && len; if (!crypto_simd_usable()) return crypto_sha1_finup(desc, data, len, out); diff --git a/arch/arm64/crypto/sha2-ce-glue.c b/arch/arm64/crypto/sha2-ce-glue.c index 955c3c2d3f5a..604a01a4ede6 100644 --- a/arch/arm64/crypto/sha2-ce-glue.c +++ b/arch/arm64/crypto/sha2-ce-glue.c @@ -57,7 +57,7 @@ static int sha256_ce_finup(struct shash_desc *desc, const u8 *data, unsigned int len, u8 *out) { struct sha256_ce_state *sctx = shash_desc_ctx(desc); - bool finalize = !sctx->sst.count && !(len % SHA256_BLOCK_SIZE); + bool finalize = !sctx->sst.count && !(len % SHA256_BLOCK_SIZE) && len; if (!crypto_simd_usable()) { if (len) diff --git a/arch/arm64/crypto/sha256-glue.c b/arch/arm64/crypto/sha256-glue.c index 04b9d17b0733..e273faca924f 100644 --- a/arch/arm64/crypto/sha256-glue.c +++ b/arch/arm64/crypto/sha256-glue.c @@ -30,15 +30,15 @@ EXPORT_SYMBOL(sha256_block_data_order); asmlinkage void sha256_block_neon(u32 *digest, const void *data, unsigned int num_blks); -static int sha256_update(struct shash_desc *desc, const u8 *data, - unsigned int len) +static int crypto_sha256_arm64_update(struct shash_desc *desc, const u8 *data, + unsigned int len) { return sha256_base_do_update(desc, data, len, (sha256_block_fn *)sha256_block_data_order); } -static int sha256_finup(struct shash_desc *desc, const u8 *data, - unsigned int len, u8 *out) +static int crypto_sha256_arm64_finup(struct shash_desc *desc, const u8 *data, + unsigned int len, u8 *out) { if (len) sha256_base_do_update(desc, data, len, @@ -49,17 +49,17 @@ static int sha256_finup(struct shash_desc *desc, const u8 *data, return sha256_base_finish(desc, out); } -static int sha256_final(struct shash_desc *desc, u8 *out) +static int crypto_sha256_arm64_final(struct shash_desc *desc, u8 *out) { - return sha256_finup(desc, NULL, 0, out); + return crypto_sha256_arm64_finup(desc, NULL, 0, out); } static struct shash_alg algs[] = { { .digestsize = SHA256_DIGEST_SIZE, .init = sha256_base_init, - .update = sha256_update, - .final = sha256_final, - .finup = sha256_finup, + .update = crypto_sha256_arm64_update, + .final = crypto_sha256_arm64_final, + .finup = crypto_sha256_arm64_finup, .descsize = sizeof(struct sha256_state), .base.cra_name = "sha256", .base.cra_driver_name = "sha256-arm64", @@ -69,9 +69,9 @@ static struct shash_alg algs[] = { { }, { .digestsize = SHA224_DIGEST_SIZE, .init = sha224_base_init, - .update = sha256_update, - .final = sha256_final, - .finup = sha256_finup, + .update = crypto_sha256_arm64_update, + .final = crypto_sha256_arm64_final, + .finup = crypto_sha256_arm64_finup, .descsize = sizeof(struct sha256_state), .base.cra_name = "sha224", .base.cra_driver_name = "sha224-arm64", diff --git a/arch/arm64/include/asm/Kbuild b/arch/arm64/include/asm/Kbuild index c52e151afab0..98a5405c8558 100644 --- a/arch/arm64/include/asm/Kbuild +++ b/arch/arm64/include/asm/Kbuild @@ -4,6 +4,7 @@ generic-y += delay.h generic-y += div64.h generic-y += dma.h generic-y += dma-contiguous.h +generic-y += dma-mapping.h generic-y += early_ioremap.h generic-y += emergency-restart.h generic-y += hw_irq.h diff --git a/arch/arm64/include/asm/acpi.h b/arch/arm64/include/asm/acpi.h index ada0bc480a1b..b263e239cb59 100644 --- a/arch/arm64/include/asm/acpi.h +++ b/arch/arm64/include/asm/acpi.h @@ -38,6 +38,9 @@ (!(entry) || (entry)->header.length < ACPI_MADT_GICC_MIN_LENGTH || \ (unsigned long)(entry) + (entry)->header.length > (end)) +#define ACPI_MADT_GICC_SPE (ACPI_OFFSET(struct acpi_madt_generic_interrupt, \ + spe_interrupt) + sizeof(u16)) + /* Basic configuration for ACPI */ #ifdef CONFIG_ACPI pgprot_t __acpi_get_mem_attribute(phys_addr_t addr); diff --git a/arch/arm64/include/asm/arch_gicv3.h b/arch/arm64/include/asm/arch_gicv3.h index 2247908e55d6..89e4c8b79349 100644 --- a/arch/arm64/include/asm/arch_gicv3.h +++ b/arch/arm64/include/asm/arch_gicv3.h @@ -152,7 +152,15 @@ static inline bool gic_prio_masking_enabled(void) static inline void gic_pmr_mask_irqs(void) { - BUILD_BUG_ON(GICD_INT_DEF_PRI <= GIC_PRIO_IRQOFF); + BUILD_BUG_ON(GICD_INT_DEF_PRI < (GIC_PRIO_IRQOFF | + GIC_PRIO_PSR_I_SET)); + BUILD_BUG_ON(GICD_INT_DEF_PRI >= GIC_PRIO_IRQON); + /* + * Need to make sure IRQON allows IRQs when SCR_EL3.FIQ is cleared + * and non-secure PMR accesses are not subject to the shifts that + * are applied to IRQ priorities + */ + BUILD_BUG_ON((0x80 | (GICD_INT_DEF_PRI >> 1)) >= GIC_PRIO_IRQON); gic_write_pmr(GIC_PRIO_IRQOFF); } diff --git a/arch/arm64/include/asm/arch_timer.h b/arch/arm64/include/asm/arch_timer.h index 6756178c27db..7ae54d7d333a 100644 --- a/arch/arm64/include/asm/arch_timer.h +++ b/arch/arm64/include/asm/arch_timer.h @@ -9,6 +9,7 @@ #define __ASM_ARCH_TIMER_H #include <asm/barrier.h> +#include <asm/hwcap.h> #include <asm/sysreg.h> #include <linux/bug.h> @@ -229,4 +230,16 @@ static inline int arch_timer_arch_init(void) return 0; } +static inline void arch_timer_set_evtstrm_feature(void) +{ + cpu_set_named_feature(EVTSTRM); +#ifdef CONFIG_COMPAT + compat_elf_hwcap |= COMPAT_HWCAP_EVTSTRM; +#endif +} + +static inline bool arch_timer_have_evtstrm_feature(void) +{ + return cpu_have_named_feature(EVTSTRM); +} #endif diff --git a/arch/arm64/include/asm/assembler.h b/arch/arm64/include/asm/assembler.h index 570d195a184d..b8cf7c85ffa2 100644 --- a/arch/arm64/include/asm/assembler.h +++ b/arch/arm64/include/asm/assembler.h @@ -96,7 +96,11 @@ * RAS Error Synchronization barrier */ .macro esb +#ifdef CONFIG_ARM64_RAS_EXTN hint #16 +#else + nop +#endif .endm /* @@ -120,17 +124,6 @@ alternative_endif .endm /* - * Sanitise a 64-bit bounded index wrt speculation, returning zero if out - * of bounds. - */ - .macro mask_nospec64, idx, limit, tmp - sub \tmp, \idx, \limit - bic \tmp, \tmp, \idx - and \idx, \idx, \tmp, asr #63 - csdb - .endm - -/* * NOP sequence */ .macro nops, num @@ -346,6 +339,13 @@ alternative_endif .endm /* + * tcr_set_t1sz - update TCR.T1SZ + */ + .macro tcr_set_t1sz, valreg, t1sz + bfi \valreg, \t1sz, #TCR_T1SZ_OFFSET, #TCR_TxSZ_WIDTH + .endm + +/* * tcr_compute_pa_size - set TCR.(I)PS to the highest supported * ID_AA64MMFR0_EL1.PARange value * @@ -534,9 +534,13 @@ USER(\label, ic ivau, \tmp2) // invalidate I line PoU * In future this may be nop'ed out when dealing with 52-bit kernel VAs. * ttbr: Value of ttbr to set, modified. */ - .macro offset_ttbr1, ttbr -#ifdef CONFIG_ARM64_USER_VA_BITS_52 + .macro offset_ttbr1, ttbr, tmp +#ifdef CONFIG_ARM64_VA_BITS_52 + mrs_s \tmp, SYS_ID_AA64MMFR2_EL1 + and \tmp, \tmp, #(0xf << ID_AA64MMFR2_LVA_SHIFT) + cbnz \tmp, .Lskipoffs_\@ orr \ttbr, \ttbr, #TTBR1_BADDR_4852_OFFSET +.Lskipoffs_\@ : #endif .endm @@ -546,7 +550,7 @@ USER(\label, ic ivau, \tmp2) // invalidate I line PoU * to be nop'ed out when dealing with 52-bit kernel VAs. */ .macro restore_ttbr1, ttbr -#ifdef CONFIG_ARM64_USER_VA_BITS_52 +#ifdef CONFIG_ARM64_VA_BITS_52 bic \ttbr, \ttbr, #TTBR1_BADDR_4852_OFFSET #endif .endm diff --git a/arch/arm64/include/asm/atomic.h b/arch/arm64/include/asm/atomic.h index 657b0457d83c..9543b5e0534d 100644 --- a/arch/arm64/include/asm/atomic.h +++ b/arch/arm64/include/asm/atomic.h @@ -13,21 +13,91 @@ #include <linux/types.h> #include <asm/barrier.h> +#include <asm/cmpxchg.h> #include <asm/lse.h> -#ifdef __KERNEL__ - -#define __ARM64_IN_ATOMIC_IMPL - -#if defined(CONFIG_ARM64_LSE_ATOMICS) && defined(CONFIG_AS_LSE) -#include <asm/atomic_lse.h> -#else -#include <asm/atomic_ll_sc.h> -#endif - -#undef __ARM64_IN_ATOMIC_IMPL - -#include <asm/cmpxchg.h> +#define ATOMIC_OP(op) \ +static inline void arch_##op(int i, atomic_t *v) \ +{ \ + __lse_ll_sc_body(op, i, v); \ +} + +ATOMIC_OP(atomic_andnot) +ATOMIC_OP(atomic_or) +ATOMIC_OP(atomic_xor) +ATOMIC_OP(atomic_add) +ATOMIC_OP(atomic_and) +ATOMIC_OP(atomic_sub) + +#undef ATOMIC_OP + +#define ATOMIC_FETCH_OP(name, op) \ +static inline int arch_##op##name(int i, atomic_t *v) \ +{ \ + return __lse_ll_sc_body(op##name, i, v); \ +} + +#define ATOMIC_FETCH_OPS(op) \ + ATOMIC_FETCH_OP(_relaxed, op) \ + ATOMIC_FETCH_OP(_acquire, op) \ + ATOMIC_FETCH_OP(_release, op) \ + ATOMIC_FETCH_OP( , op) + +ATOMIC_FETCH_OPS(atomic_fetch_andnot) +ATOMIC_FETCH_OPS(atomic_fetch_or) +ATOMIC_FETCH_OPS(atomic_fetch_xor) +ATOMIC_FETCH_OPS(atomic_fetch_add) +ATOMIC_FETCH_OPS(atomic_fetch_and) +ATOMIC_FETCH_OPS(atomic_fetch_sub) +ATOMIC_FETCH_OPS(atomic_add_return) +ATOMIC_FETCH_OPS(atomic_sub_return) + +#undef ATOMIC_FETCH_OP +#undef ATOMIC_FETCH_OPS + +#define ATOMIC64_OP(op) \ +static inline void arch_##op(long i, atomic64_t *v) \ +{ \ + __lse_ll_sc_body(op, i, v); \ +} + +ATOMIC64_OP(atomic64_andnot) +ATOMIC64_OP(atomic64_or) +ATOMIC64_OP(atomic64_xor) +ATOMIC64_OP(atomic64_add) +ATOMIC64_OP(atomic64_and) +ATOMIC64_OP(atomic64_sub) + +#undef ATOMIC64_OP + +#define ATOMIC64_FETCH_OP(name, op) \ +static inline long arch_##op##name(long i, atomic64_t *v) \ +{ \ + return __lse_ll_sc_body(op##name, i, v); \ +} + +#define ATOMIC64_FETCH_OPS(op) \ + ATOMIC64_FETCH_OP(_relaxed, op) \ + ATOMIC64_FETCH_OP(_acquire, op) \ + ATOMIC64_FETCH_OP(_release, op) \ + ATOMIC64_FETCH_OP( , op) + +ATOMIC64_FETCH_OPS(atomic64_fetch_andnot) +ATOMIC64_FETCH_OPS(atomic64_fetch_or) +ATOMIC64_FETCH_OPS(atomic64_fetch_xor) +ATOMIC64_FETCH_OPS(atomic64_fetch_add) +ATOMIC64_FETCH_OPS(atomic64_fetch_and) +ATOMIC64_FETCH_OPS(atomic64_fetch_sub) +ATOMIC64_FETCH_OPS(atomic64_add_return) +ATOMIC64_FETCH_OPS(atomic64_sub_return) + +#undef ATOMIC64_FETCH_OP +#undef ATOMIC64_FETCH_OPS + +static inline long arch_atomic64_dec_if_positive(atomic64_t *v) +{ + return __lse_ll_sc_body(atomic64_dec_if_positive, v); +} #define ATOMIC_INIT(i) { (i) } @@ -157,5 +227,4 @@ #include <asm-generic/atomic-instrumented.h> -#endif -#endif +#endif /* __ASM_ATOMIC_H */ diff --git a/arch/arm64/include/asm/atomic_ll_sc.h b/arch/arm64/include/asm/atomic_ll_sc.h index 23c378606aed..7b012148bfd6 100644 --- a/arch/arm64/include/asm/atomic_ll_sc.h +++ b/arch/arm64/include/asm/atomic_ll_sc.h @@ -10,83 +10,92 @@ #ifndef __ASM_ATOMIC_LL_SC_H #define __ASM_ATOMIC_LL_SC_H -#ifndef __ARM64_IN_ATOMIC_IMPL -#error "please don't include this file directly" +#include <linux/stringify.h> + +#if IS_ENABLED(CONFIG_ARM64_LSE_ATOMICS) && IS_ENABLED(CONFIG_AS_LSE) +#define __LL_SC_FALLBACK(asm_ops) \ +" b 3f\n" \ +" .subsection 1\n" \ +"3:\n" \ +asm_ops "\n" \ +" b 4f\n" \ +" .previous\n" \ +"4:\n" +#else +#define __LL_SC_FALLBACK(asm_ops) asm_ops +#endif + +#ifndef CONFIG_CC_HAS_K_CONSTRAINT +#define K #endif /* * AArch64 UP and SMP safe atomic ops. We use load exclusive and * store exclusive to ensure that these are atomic. We may loop * to ensure that the update happens. - * - * NOTE: these functions do *not* follow the PCS and must explicitly - * save any clobbered registers other than x0 (regardless of return - * value). This is achieved through -fcall-saved-* compiler flags for - * this file, which unfortunately don't work on a per-function basis - * (the optimize attribute silently ignores these options). */ -#define ATOMIC_OP(op, asm_op) \ -__LL_SC_INLINE void \ -__LL_SC_PREFIX(arch_atomic_##op(int i, atomic_t *v)) \ +#define ATOMIC_OP(op, asm_op, constraint) \ +static inline void \ +__ll_sc_atomic_##op(int i, atomic_t *v) \ { \ unsigned long tmp; \ int result; \ \ asm volatile("// atomic_" #op "\n" \ + __LL_SC_FALLBACK( \ " prfm pstl1strm, %2\n" \ "1: ldxr %w0, %2\n" \ " " #asm_op " %w0, %w0, %w3\n" \ " stxr %w1, %w0, %2\n" \ -" cbnz %w1, 1b" \ +" cbnz %w1, 1b\n") \ : "=&r" (result), "=&r" (tmp), "+Q" (v->counter) \ - : "Ir" (i)); \ -} \ -__LL_SC_EXPORT(arch_atomic_##op); + : __stringify(constraint) "r" (i)); \ +} -#define ATOMIC_OP_RETURN(name, mb, acq, rel, cl, op, asm_op) \ -__LL_SC_INLINE int \ -__LL_SC_PREFIX(arch_atomic_##op##_return##name(int i, atomic_t *v)) \ +#define ATOMIC_OP_RETURN(name, mb, acq, rel, cl, op, asm_op, constraint)\ +static inline int \ +__ll_sc_atomic_##op##_return##name(int i, atomic_t *v) \ { \ unsigned long tmp; \ int result; \ \ asm volatile("// atomic_" #op "_return" #name "\n" \ + __LL_SC_FALLBACK( \ " prfm pstl1strm, %2\n" \ "1: ld" #acq "xr %w0, %2\n" \ " " #asm_op " %w0, %w0, %w3\n" \ " st" #rel "xr %w1, %w0, %2\n" \ " cbnz %w1, 1b\n" \ -" " #mb \ +" " #mb ) \ : "=&r" (result), "=&r" (tmp), "+Q" (v->counter) \ - : "Ir" (i) \ + : __stringify(constraint) "r" (i) \ : cl); \ \ return result; \ -} \ -__LL_SC_EXPORT(arch_atomic_##op##_return##name); +} -#define ATOMIC_FETCH_OP(name, mb, acq, rel, cl, op, asm_op) \ -__LL_SC_INLINE int \ -__LL_SC_PREFIX(arch_atomic_fetch_##op##name(int i, atomic_t *v)) \ +#define ATOMIC_FETCH_OP(name, mb, acq, rel, cl, op, asm_op, constraint) \ +static inline int \ +__ll_sc_atomic_fetch_##op##name(int i, atomic_t *v) \ { \ unsigned long tmp; \ int val, result; \ \ asm volatile("// atomic_fetch_" #op #name "\n" \ + __LL_SC_FALLBACK( \ " prfm pstl1strm, %3\n" \ "1: ld" #acq "xr %w0, %3\n" \ " " #asm_op " %w1, %w0, %w4\n" \ " st" #rel "xr %w2, %w1, %3\n" \ " cbnz %w2, 1b\n" \ -" " #mb \ +" " #mb ) \ : "=&r" (result), "=&r" (val), "=&r" (tmp), "+Q" (v->counter) \ - : "Ir" (i) \ + : __stringify(constraint) "r" (i) \ : cl); \ \ return result; \ -} \ -__LL_SC_EXPORT(arch_atomic_fetch_##op##name); +} #define ATOMIC_OPS(...) \ ATOMIC_OP(__VA_ARGS__) \ @@ -99,8 +108,8 @@ __LL_SC_EXPORT(arch_atomic_fetch_##op##name); ATOMIC_FETCH_OP (_acquire, , a, , "memory", __VA_ARGS__)\ ATOMIC_FETCH_OP (_release, , , l, "memory", __VA_ARGS__) -ATOMIC_OPS(add, add) -ATOMIC_OPS(sub, sub) +ATOMIC_OPS(add, add, I) +ATOMIC_OPS(sub, sub, J) #undef ATOMIC_OPS #define ATOMIC_OPS(...) \ @@ -110,77 +119,82 @@ ATOMIC_OPS(sub, sub) ATOMIC_FETCH_OP (_acquire, , a, , "memory", __VA_ARGS__)\ ATOMIC_FETCH_OP (_release, , , l, "memory", __VA_ARGS__) -ATOMIC_OPS(and, and) -ATOMIC_OPS(andnot, bic) -ATOMIC_OPS(or, orr) -ATOMIC_OPS(xor, eor) +ATOMIC_OPS(and, and, K) +ATOMIC_OPS(or, orr, K) +ATOMIC_OPS(xor, eor, K) +/* + * GAS converts the mysterious and undocumented BIC (immediate) alias to + * an AND (immediate) instruction with the immediate inverted. We don't + * have a constraint for this, so fall back to register. + */ +ATOMIC_OPS(andnot, bic, ) #undef ATOMIC_OPS #undef ATOMIC_FETCH_OP #undef ATOMIC_OP_RETURN #undef ATOMIC_OP -#define ATOMIC64_OP(op, asm_op) \ -__LL_SC_INLINE void \ -__LL_SC_PREFIX(arch_atomic64_##op(long i, atomic64_t *v)) \ +#define ATOMIC64_OP(op, asm_op, constraint) \ +static inline void \ +__ll_sc_atomic64_##op(s64 i, atomic64_t *v) \ { \ - long result; \ + s64 result; \ unsigned long tmp; \ \ asm volatile("// atomic64_" #op "\n" \ + __LL_SC_FALLBACK( \ " prfm pstl1strm, %2\n" \ "1: ldxr %0, %2\n" \ " " #asm_op " %0, %0, %3\n" \ " stxr %w1, %0, %2\n" \ -" cbnz %w1, 1b" \ +" cbnz %w1, 1b") \ : "=&r" (result), "=&r" (tmp), "+Q" (v->counter) \ - : "Ir" (i)); \ -} \ -__LL_SC_EXPORT(arch_atomic64_##op); + : __stringify(constraint) "r" (i)); \ +} -#define ATOMIC64_OP_RETURN(name, mb, acq, rel, cl, op, asm_op) \ -__LL_SC_INLINE long \ -__LL_SC_PREFIX(arch_atomic64_##op##_return##name(long i, atomic64_t *v))\ +#define ATOMIC64_OP_RETURN(name, mb, acq, rel, cl, op, asm_op, constraint)\ +static inline long \ +__ll_sc_atomic64_##op##_return##name(s64 i, atomic64_t *v) \ { \ - long result; \ + s64 result; \ unsigned long tmp; \ \ asm volatile("// atomic64_" #op "_return" #name "\n" \ + __LL_SC_FALLBACK( \ " prfm pstl1strm, %2\n" \ "1: ld" #acq "xr %0, %2\n" \ " " #asm_op " %0, %0, %3\n" \ " st" #rel "xr %w1, %0, %2\n" \ " cbnz %w1, 1b\n" \ -" " #mb \ +" " #mb ) \ : "=&r" (result), "=&r" (tmp), "+Q" (v->counter) \ - : "Ir" (i) \ + : __stringify(constraint) "r" (i) \ : cl); \ \ return result; \ -} \ -__LL_SC_EXPORT(arch_atomic64_##op##_return##name); +} -#define ATOMIC64_FETCH_OP(name, mb, acq, rel, cl, op, asm_op) \ -__LL_SC_INLINE long \ -__LL_SC_PREFIX(arch_atomic64_fetch_##op##name(long i, atomic64_t *v)) \ +#define ATOMIC64_FETCH_OP(name, mb, acq, rel, cl, op, asm_op, constraint)\ +static inline long \ +__ll_sc_atomic64_fetch_##op##name(s64 i, atomic64_t *v) \ { \ - long result, val; \ + s64 result, val; \ unsigned long tmp; \ \ asm volatile("// atomic64_fetch_" #op #name "\n" \ + __LL_SC_FALLBACK( \ " prfm pstl1strm, %3\n" \ "1: ld" #acq "xr %0, %3\n" \ " " #asm_op " %1, %0, %4\n" \ " st" #rel "xr %w2, %1, %3\n" \ " cbnz %w2, 1b\n" \ -" " #mb \ +" " #mb ) \ : "=&r" (result), "=&r" (val), "=&r" (tmp), "+Q" (v->counter) \ - : "Ir" (i) \ + : __stringify(constraint) "r" (i) \ : cl); \ \ return result; \ -} \ -__LL_SC_EXPORT(arch_atomic64_fetch_##op##name); +} #define ATOMIC64_OPS(...) \ ATOMIC64_OP(__VA_ARGS__) \ @@ -193,8 +207,8 @@ __LL_SC_EXPORT(arch_atomic64_fetch_##op##name); ATOMIC64_FETCH_OP (_acquire,, a, , "memory", __VA_ARGS__) \ ATOMIC64_FETCH_OP (_release,, , l, "memory", __VA_ARGS__) -ATOMIC64_OPS(add, add) -ATOMIC64_OPS(sub, sub) +ATOMIC64_OPS(add, add, I) +ATOMIC64_OPS(sub, sub, J) #undef ATOMIC64_OPS #define ATOMIC64_OPS(...) \ @@ -204,23 +218,29 @@ ATOMIC64_OPS(sub, sub) ATOMIC64_FETCH_OP (_acquire,, a, , "memory", __VA_ARGS__) \ ATOMIC64_FETCH_OP (_release,, , l, "memory", __VA_ARGS__) -ATOMIC64_OPS(and, and) -ATOMIC64_OPS(andnot, bic) -ATOMIC64_OPS(or, orr) -ATOMIC64_OPS(xor, eor) +ATOMIC64_OPS(and, and, L) +ATOMIC64_OPS(or, orr, L) +ATOMIC64_OPS(xor, eor, L) +/* + * GAS converts the mysterious and undocumented BIC (immediate) alias to + * an AND (immediate) instruction with the immediate inverted. We don't + * have a constraint for this, so fall back to register. + */ +ATOMIC64_OPS(andnot, bic, ) #undef ATOMIC64_OPS #undef ATOMIC64_FETCH_OP #undef ATOMIC64_OP_RETURN #undef ATOMIC64_OP -__LL_SC_INLINE long -__LL_SC_PREFIX(arch_atomic64_dec_if_positive(atomic64_t *v)) +static inline s64 +__ll_sc_atomic64_dec_if_positive(atomic64_t *v) { - long result; + s64 result; unsigned long tmp; asm volatile("// atomic64_dec_if_positive\n" + __LL_SC_FALLBACK( " prfm pstl1strm, %2\n" "1: ldxr %0, %2\n" " subs %0, %0, #1\n" @@ -228,20 +248,19 @@ __LL_SC_PREFIX(arch_atomic64_dec_if_positive(atomic64_t *v)) " stlxr %w1, %0, %2\n" " cbnz %w1, 1b\n" " dmb ish\n" -"2:" +"2:") : "=&r" (result), "=&r" (tmp), "+Q" (v->counter) : : "cc", "memory"); return result; } -__LL_SC_EXPORT(arch_atomic64_dec_if_positive); -#define __CMPXCHG_CASE(w, sfx, name, sz, mb, acq, rel, cl) \ -__LL_SC_INLINE u##sz \ -__LL_SC_PREFIX(__cmpxchg_case_##name##sz(volatile void *ptr, \ +#define __CMPXCHG_CASE(w, sfx, name, sz, mb, acq, rel, cl, constraint) \ +static inline u##sz \ +__ll_sc__cmpxchg_case_##name##sz(volatile void *ptr, \ unsigned long old, \ - u##sz new)) \ + u##sz new) \ { \ unsigned long tmp; \ u##sz oldval; \ @@ -255,6 +274,7 @@ __LL_SC_PREFIX(__cmpxchg_case_##name##sz(volatile void *ptr, \ old = (u##sz)old; \ \ asm volatile( \ + __LL_SC_FALLBACK( \ " prfm pstl1strm, %[v]\n" \ "1: ld" #acq "xr" #sfx "\t%" #w "[oldval], %[v]\n" \ " eor %" #w "[tmp], %" #w "[oldval], %" #w "[old]\n" \ @@ -262,46 +282,51 @@ __LL_SC_PREFIX(__cmpxchg_case_##name##sz(volatile void *ptr, \ " st" #rel "xr" #sfx "\t%w[tmp], %" #w "[new], %[v]\n" \ " cbnz %w[tmp], 1b\n" \ " " #mb "\n" \ - "2:" \ + "2:") \ : [tmp] "=&r" (tmp), [oldval] "=&r" (oldval), \ [v] "+Q" (*(u##sz *)ptr) \ - : [old] "Kr" (old), [new] "r" (new) \ + : [old] __stringify(constraint) "r" (old), [new] "r" (new) \ : cl); \ \ return oldval; \ -} \ -__LL_SC_EXPORT(__cmpxchg_case_##name##sz); +} -__CMPXCHG_CASE(w, b, , 8, , , , ) -__CMPXCHG_CASE(w, h, , 16, , , , ) -__CMPXCHG_CASE(w, , , 32, , , , ) -__CMPXCHG_CASE( , , , 64, , , , ) -__CMPXCHG_CASE(w, b, acq_, 8, , a, , "memory") -__CMPXCHG_CASE(w, h, acq_, 16, , a, , "memory") -__CMPXCHG_CASE(w, , acq_, 32, , a, , "memory") -__CMPXCHG_CASE( , , acq_, 64, , a, , "memory") -__CMPXCHG_CASE(w, b, rel_, 8, , , l, "memory") -__CMPXCHG_CASE(w, h, rel_, 16, , , l, "memory") -__CMPXCHG_CASE(w, , rel_, 32, , , l, "memory") -__CMPXCHG_CASE( , , rel_, 64, , , l, "memory") -__CMPXCHG_CASE(w, b, mb_, 8, dmb ish, , l, "memory") -__CMPXCHG_CASE(w, h, mb_, 16, dmb ish, , l, "memory") -__CMPXCHG_CASE(w, , mb_, 32, dmb ish, , l, "memory") -__CMPXCHG_CASE( , , mb_, 64, dmb ish, , l, "memory") +/* + * Earlier versions of GCC (no later than 8.1.0) appear to incorrectly + * handle the 'K' constraint for the value 4294967295 - thus we use no + * constraint for 32 bit operations. + */ +__CMPXCHG_CASE(w, b, , 8, , , , , K) +__CMPXCHG_CASE(w, h, , 16, , , , , K) +__CMPXCHG_CASE(w, , , 32, , , , , K) +__CMPXCHG_CASE( , , , 64, , , , , L) +__CMPXCHG_CASE(w, b, acq_, 8, , a, , "memory", K) +__CMPXCHG_CASE(w, h, acq_, 16, , a, , "memory", K) +__CMPXCHG_CASE(w, , acq_, 32, , a, , "memory", K) +__CMPXCHG_CASE( , , acq_, 64, , a, , "memory", L) +__CMPXCHG_CASE(w, b, rel_, 8, , , l, "memory", K) +__CMPXCHG_CASE(w, h, rel_, 16, , , l, "memory", K) +__CMPXCHG_CASE(w, , rel_, 32, , , l, "memory", K) +__CMPXCHG_CASE( , , rel_, 64, , , l, "memory", L) +__CMPXCHG_CASE(w, b, mb_, 8, dmb ish, , l, "memory", K) +__CMPXCHG_CASE(w, h, mb_, 16, dmb ish, , l, "memory", K) +__CMPXCHG_CASE(w, , mb_, 32, dmb ish, , l, "memory", K) +__CMPXCHG_CASE( , , mb_, 64, dmb ish, , l, "memory", L) #undef __CMPXCHG_CASE #define __CMPXCHG_DBL(name, mb, rel, cl) \ -__LL_SC_INLINE long \ -__LL_SC_PREFIX(__cmpxchg_double##name(unsigned long old1, \ +static inline long \ +__ll_sc__cmpxchg_double##name(unsigned long old1, \ unsigned long old2, \ unsigned long new1, \ unsigned long new2, \ - volatile void *ptr)) \ + volatile void *ptr) \ { \ unsigned long tmp, ret; \ \ asm volatile("// __cmpxchg_double" #name "\n" \ + __LL_SC_FALLBACK( \ " prfm pstl1strm, %2\n" \ "1: ldxp %0, %1, %2\n" \ " eor %0, %0, %3\n" \ @@ -311,18 +336,18 @@ __LL_SC_PREFIX(__cmpxchg_double##name(unsigned long old1, \ " st" #rel "xp %w0, %5, %6, %2\n" \ " cbnz %w0, 1b\n" \ " " #mb "\n" \ - "2:" \ + "2:") \ : "=&r" (tmp), "=&r" (ret), "+Q" (*(unsigned long *)ptr) \ : "r" (old1), "r" (old2), "r" (new1), "r" (new2) \ : cl); \ \ return ret; \ -} \ -__LL_SC_EXPORT(__cmpxchg_double##name); +} __CMPXCHG_DBL( , , , ) __CMPXCHG_DBL(_mb, dmb ish, l, "memory") #undef __CMPXCHG_DBL +#undef K #endif /* __ASM_ATOMIC_LL_SC_H */ diff --git a/arch/arm64/include/asm/atomic_lse.h b/arch/arm64/include/asm/atomic_lse.h index 45e030d54332..c6bd87d2915b 100644 --- a/arch/arm64/include/asm/atomic_lse.h +++ b/arch/arm64/include/asm/atomic_lse.h @@ -10,22 +10,13 @@ #ifndef __ASM_ATOMIC_LSE_H #define __ASM_ATOMIC_LSE_H -#ifndef __ARM64_IN_ATOMIC_IMPL -#error "please don't include this file directly" -#endif - -#define __LL_SC_ATOMIC(op) __LL_SC_CALL(arch_atomic_##op) #define ATOMIC_OP(op, asm_op) \ -static inline void arch_atomic_##op(int i, atomic_t *v) \ +static inline void __lse_atomic_##op(int i, atomic_t *v) \ { \ - register int w0 asm ("w0") = i; \ - register atomic_t *x1 asm ("x1") = v; \ - \ - asm volatile(ARM64_LSE_ATOMIC_INSN(__LL_SC_ATOMIC(op), \ -" " #asm_op " %w[i], %[v]\n") \ - : [i] "+r" (w0), [v] "+Q" (v->counter) \ - : "r" (x1) \ - : __LL_SC_CLOBBERS); \ + asm volatile( \ +" " #asm_op " %w[i], %[v]\n" \ + : [i] "+r" (i), [v] "+Q" (v->counter) \ + : "r" (v)); \ } ATOMIC_OP(andnot, stclr) @@ -36,21 +27,15 @@ ATOMIC_OP(add, stadd) #undef ATOMIC_OP #define ATOMIC_FETCH_OP(name, mb, op, asm_op, cl...) \ -static inline int arch_atomic_fetch_##op##name(int i, atomic_t *v) \ +static inline int __lse_atomic_fetch_##op##name(int i, atomic_t *v) \ { \ - register int w0 asm ("w0") = i; \ - register atomic_t *x1 asm ("x1") = v; \ - \ - asm volatile(ARM64_LSE_ATOMIC_INSN( \ - /* LL/SC */ \ - __LL_SC_ATOMIC(fetch_##op##name), \ - /* LSE atomics */ \ -" " #asm_op #mb " %w[i], %w[i], %[v]") \ - : [i] "+r" (w0), [v] "+Q" (v->counter) \ - : "r" (x1) \ - : __LL_SC_CLOBBERS, ##cl); \ + asm volatile( \ +" " #asm_op #mb " %w[i], %w[i], %[v]" \ + : [i] "+r" (i), [v] "+Q" (v->counter) \ + : "r" (v) \ + : cl); \ \ - return w0; \ + return i; \ } #define ATOMIC_FETCH_OPS(op, asm_op) \ @@ -68,23 +53,18 @@ ATOMIC_FETCH_OPS(add, ldadd) #undef ATOMIC_FETCH_OPS #define ATOMIC_OP_ADD_RETURN(name, mb, cl...) \ -static inline int arch_atomic_add_return##name(int i, atomic_t *v) \ +static inline int __lse_atomic_add_return##name(int i, atomic_t *v) \ { \ - register int w0 asm ("w0") = i; \ - register atomic_t *x1 asm ("x1") = v; \ + u32 tmp; \ \ - asm volatile(ARM64_LSE_ATOMIC_INSN( \ - /* LL/SC */ \ - __LL_SC_ATOMIC(add_return##name) \ - __nops(1), \ - /* LSE atomics */ \ - " ldadd" #mb " %w[i], w30, %[v]\n" \ - " add %w[i], %w[i], w30") \ - : [i] "+r" (w0), [v] "+Q" (v->counter) \ - : "r" (x1) \ - : __LL_SC_CLOBBERS, ##cl); \ + asm volatile( \ + " ldadd" #mb " %w[i], %w[tmp], %[v]\n" \ + " add %w[i], %w[i], %w[tmp]" \ + : [i] "+r" (i), [v] "+Q" (v->counter), [tmp] "=&r" (tmp) \ + : "r" (v) \ + : cl); \ \ - return w0; \ + return i; \ } ATOMIC_OP_ADD_RETURN(_relaxed, ) @@ -94,41 +74,26 @@ ATOMIC_OP_ADD_RETURN( , al, "memory") #undef ATOMIC_OP_ADD_RETURN -static inline void arch_atomic_and(int i, atomic_t *v) +static inline void __lse_atomic_and(int i, atomic_t *v) { - register int w0 asm ("w0") = i; - register atomic_t *x1 asm ("x1") = v; - - asm volatile(ARM64_LSE_ATOMIC_INSN( - /* LL/SC */ - __LL_SC_ATOMIC(and) - __nops(1), - /* LSE atomics */ + asm volatile( " mvn %w[i], %w[i]\n" - " stclr %w[i], %[v]") - : [i] "+&r" (w0), [v] "+Q" (v->counter) - : "r" (x1) - : __LL_SC_CLOBBERS); + " stclr %w[i], %[v]" + : [i] "+&r" (i), [v] "+Q" (v->counter) + : "r" (v)); } #define ATOMIC_FETCH_OP_AND(name, mb, cl...) \ -static inline int arch_atomic_fetch_and##name(int i, atomic_t *v) \ +static inline int __lse_atomic_fetch_and##name(int i, atomic_t *v) \ { \ - register int w0 asm ("w0") = i; \ - register atomic_t *x1 asm ("x1") = v; \ - \ - asm volatile(ARM64_LSE_ATOMIC_INSN( \ - /* LL/SC */ \ - __LL_SC_ATOMIC(fetch_and##name) \ - __nops(1), \ - /* LSE atomics */ \ + asm volatile( \ " mvn %w[i], %w[i]\n" \ - " ldclr" #mb " %w[i], %w[i], %[v]") \ - : [i] "+&r" (w0), [v] "+Q" (v->counter) \ - : "r" (x1) \ - : __LL_SC_CLOBBERS, ##cl); \ + " ldclr" #mb " %w[i], %w[i], %[v]" \ + : [i] "+&r" (i), [v] "+Q" (v->counter) \ + : "r" (v) \ + : cl); \ \ - return w0; \ + return i; \ } ATOMIC_FETCH_OP_AND(_relaxed, ) @@ -138,42 +103,29 @@ ATOMIC_FETCH_OP_AND( , al, "memory") #undef ATOMIC_FETCH_OP_AND -static inline void arch_atomic_sub(int i, atomic_t *v) +static inline void __lse_atomic_sub(int i, atomic_t *v) { - register int w0 asm ("w0") = i; - register atomic_t *x1 asm ("x1") = v; - - asm volatile(ARM64_LSE_ATOMIC_INSN( - /* LL/SC */ - __LL_SC_ATOMIC(sub) - __nops(1), - /* LSE atomics */ + asm volatile( " neg %w[i], %w[i]\n" - " stadd %w[i], %[v]") - : [i] "+&r" (w0), [v] "+Q" (v->counter) - : "r" (x1) - : __LL_SC_CLOBBERS); + " stadd %w[i], %[v]" + : [i] "+&r" (i), [v] "+Q" (v->counter) + : "r" (v)); } #define ATOMIC_OP_SUB_RETURN(name, mb, cl...) \ -static inline int arch_atomic_sub_return##name(int i, atomic_t *v) \ +static inline int __lse_atomic_sub_return##name(int i, atomic_t *v) \ { \ - register int w0 asm ("w0") = i; \ - register atomic_t *x1 asm ("x1") = v; \ + u32 tmp; \ \ - asm volatile(ARM64_LSE_ATOMIC_INSN( \ - /* LL/SC */ \ - __LL_SC_ATOMIC(sub_return##name) \ - __nops(2), \ - /* LSE atomics */ \ + asm volatile( \ " neg %w[i], %w[i]\n" \ - " ldadd" #mb " %w[i], w30, %[v]\n" \ - " add %w[i], %w[i], w30") \ - : [i] "+&r" (w0), [v] "+Q" (v->counter) \ - : "r" (x1) \ - : __LL_SC_CLOBBERS , ##cl); \ + " ldadd" #mb " %w[i], %w[tmp], %[v]\n" \ + " add %w[i], %w[i], %w[tmp]" \ + : [i] "+&r" (i), [v] "+Q" (v->counter), [tmp] "=&r" (tmp) \ + : "r" (v) \ + : cl); \ \ - return w0; \ + return i; \ } ATOMIC_OP_SUB_RETURN(_relaxed, ) @@ -184,23 +136,16 @@ ATOMIC_OP_SUB_RETURN( , al, "memory") #undef ATOMIC_OP_SUB_RETURN #define ATOMIC_FETCH_OP_SUB(name, mb, cl...) \ -static inline int arch_atomic_fetch_sub##name(int i, atomic_t *v) \ +static inline int __lse_atomic_fetch_sub##name(int i, atomic_t *v) \ { \ - register int w0 asm ("w0") = i; \ - register atomic_t *x1 asm ("x1") = v; \ - \ - asm volatile(ARM64_LSE_ATOMIC_INSN( \ - /* LL/SC */ \ - __LL_SC_ATOMIC(fetch_sub##name) \ - __nops(1), \ - /* LSE atomics */ \ + asm volatile( \ " neg %w[i], %w[i]\n" \ - " ldadd" #mb " %w[i], %w[i], %[v]") \ - : [i] "+&r" (w0), [v] "+Q" (v->counter) \ - : "r" (x1) \ - : __LL_SC_CLOBBERS, ##cl); \ + " ldadd" #mb " %w[i], %w[i], %[v]" \ + : [i] "+&r" (i), [v] "+Q" (v->counter) \ + : "r" (v) \ + : cl); \ \ - return w0; \ + return i; \ } ATOMIC_FETCH_OP_SUB(_relaxed, ) @@ -209,20 +154,14 @@ ATOMIC_FETCH_OP_SUB(_release, l, "memory") ATOMIC_FETCH_OP_SUB( , al, "memory") #undef ATOMIC_FETCH_OP_SUB -#undef __LL_SC_ATOMIC -#define __LL_SC_ATOMIC64(op) __LL_SC_CALL(arch_atomic64_##op) #define ATOMIC64_OP(op, asm_op) \ -static inline void arch_atomic64_##op(long i, atomic64_t *v) \ +static inline void __lse_atomic64_##op(s64 i, atomic64_t *v) \ { \ - register long x0 asm ("x0") = i; \ - register atomic64_t *x1 asm ("x1") = v; \ - \ - asm volatile(ARM64_LSE_ATOMIC_INSN(__LL_SC_ATOMIC64(op), \ -" " #asm_op " %[i], %[v]\n") \ - : [i] "+r" (x0), [v] "+Q" (v->counter) \ - : "r" (x1) \ - : __LL_SC_CLOBBERS); \ + asm volatile( \ +" " #asm_op " %[i], %[v]\n" \ + : [i] "+r" (i), [v] "+Q" (v->counter) \ + : "r" (v)); \ } ATOMIC64_OP(andnot, stclr) @@ -233,21 +172,15 @@ ATOMIC64_OP(add, stadd) #undef ATOMIC64_OP #define ATOMIC64_FETCH_OP(name, mb, op, asm_op, cl...) \ -static inline long arch_atomic64_fetch_##op##name(long i, atomic64_t *v)\ +static inline long __lse_atomic64_fetch_##op##name(s64 i, atomic64_t *v)\ { \ - register long x0 asm ("x0") = i; \ - register atomic64_t *x1 asm ("x1") = v; \ - \ - asm volatile(ARM64_LSE_ATOMIC_INSN( \ - /* LL/SC */ \ - __LL_SC_ATOMIC64(fetch_##op##name), \ - /* LSE atomics */ \ -" " #asm_op #mb " %[i], %[i], %[v]") \ - : [i] "+r" (x0), [v] "+Q" (v->counter) \ - : "r" (x1) \ - : __LL_SC_CLOBBERS, ##cl); \ + asm volatile( \ +" " #asm_op #mb " %[i], %[i], %[v]" \ + : [i] "+r" (i), [v] "+Q" (v->counter) \ + : "r" (v) \ + : cl); \ \ - return x0; \ + return i; \ } #define ATOMIC64_FETCH_OPS(op, asm_op) \ @@ -265,23 +198,18 @@ ATOMIC64_FETCH_OPS(add, ldadd) #undef ATOMIC64_FETCH_OPS #define ATOMIC64_OP_ADD_RETURN(name, mb, cl...) \ -static inline long arch_atomic64_add_return##name(long i, atomic64_t *v)\ +static inline long __lse_atomic64_add_return##name(s64 i, atomic64_t *v)\ { \ - register long x0 asm ("x0") = i; \ - register atomic64_t *x1 asm ("x1") = v; \ + unsigned long tmp; \ \ - asm volatile(ARM64_LSE_ATOMIC_INSN( \ - /* LL/SC */ \ - __LL_SC_ATOMIC64(add_return##name) \ - __nops(1), \ - /* LSE atomics */ \ - " ldadd" #mb " %[i], x30, %[v]\n" \ - " add %[i], %[i], x30") \ - : [i] "+r" (x0), [v] "+Q" (v->counter) \ - : "r" (x1) \ - : __LL_SC_CLOBBERS, ##cl); \ + asm volatile( \ + " ldadd" #mb " %[i], %x[tmp], %[v]\n" \ + " add %[i], %[i], %x[tmp]" \ + : [i] "+r" (i), [v] "+Q" (v->counter), [tmp] "=&r" (tmp) \ + : "r" (v) \ + : cl); \ \ - return x0; \ + return i; \ } ATOMIC64_OP_ADD_RETURN(_relaxed, ) @@ -291,41 +219,26 @@ ATOMIC64_OP_ADD_RETURN( , al, "memory") #undef ATOMIC64_OP_ADD_RETURN -static inline void arch_atomic64_and(long i, atomic64_t *v) +static inline void __lse_atomic64_and(s64 i, atomic64_t *v) { - register long x0 asm ("x0") = i; - register atomic64_t *x1 asm ("x1") = v; - - asm volatile(ARM64_LSE_ATOMIC_INSN( - /* LL/SC */ - __LL_SC_ATOMIC64(and) - __nops(1), - /* LSE atomics */ + asm volatile( " mvn %[i], %[i]\n" - " stclr %[i], %[v]") - : [i] "+&r" (x0), [v] "+Q" (v->counter) - : "r" (x1) - : __LL_SC_CLOBBERS); + " stclr %[i], %[v]" + : [i] "+&r" (i), [v] "+Q" (v->counter) + : "r" (v)); } #define ATOMIC64_FETCH_OP_AND(name, mb, cl...) \ -static inline long arch_atomic64_fetch_and##name(long i, atomic64_t *v) \ +static inline long __lse_atomic64_fetch_and##name(s64 i, atomic64_t *v) \ { \ - register long x0 asm ("x0") = i; \ - register atomic64_t *x1 asm ("x1") = v; \ - \ - asm volatile(ARM64_LSE_ATOMIC_INSN( \ - /* LL/SC */ \ - __LL_SC_ATOMIC64(fetch_and##name) \ - __nops(1), \ - /* LSE atomics */ \ + asm volatile( \ " mvn %[i], %[i]\n" \ - " ldclr" #mb " %[i], %[i], %[v]") \ - : [i] "+&r" (x0), [v] "+Q" (v->counter) \ - : "r" (x1) \ - : __LL_SC_CLOBBERS, ##cl); \ + " ldclr" #mb " %[i], %[i], %[v]" \ + : [i] "+&r" (i), [v] "+Q" (v->counter) \ + : "r" (v) \ + : cl); \ \ - return x0; \ + return i; \ } ATOMIC64_FETCH_OP_AND(_relaxed, ) @@ -335,42 +248,29 @@ ATOMIC64_FETCH_OP_AND( , al, "memory") #undef ATOMIC64_FETCH_OP_AND -static inline void arch_atomic64_sub(long i, atomic64_t *v) +static inline void __lse_atomic64_sub(s64 i, atomic64_t *v) { - register long x0 asm ("x0") = i; - register atomic64_t *x1 asm ("x1") = v; - - asm volatile(ARM64_LSE_ATOMIC_INSN( - /* LL/SC */ - __LL_SC_ATOMIC64(sub) - __nops(1), - /* LSE atomics */ + asm volatile( " neg %[i], %[i]\n" - " stadd %[i], %[v]") - : [i] "+&r" (x0), [v] "+Q" (v->counter) - : "r" (x1) - : __LL_SC_CLOBBERS); + " stadd %[i], %[v]" + : [i] "+&r" (i), [v] "+Q" (v->counter) + : "r" (v)); } #define ATOMIC64_OP_SUB_RETURN(name, mb, cl...) \ -static inline long arch_atomic64_sub_return##name(long i, atomic64_t *v)\ +static inline long __lse_atomic64_sub_return##name(s64 i, atomic64_t *v) \ { \ - register long x0 asm ("x0") = i; \ - register atomic64_t *x1 asm ("x1") = v; \ + unsigned long tmp; \ \ - asm volatile(ARM64_LSE_ATOMIC_INSN( \ - /* LL/SC */ \ - __LL_SC_ATOMIC64(sub_return##name) \ - __nops(2), \ - /* LSE atomics */ \ + asm volatile( \ " neg %[i], %[i]\n" \ - " ldadd" #mb " %[i], x30, %[v]\n" \ - " add %[i], %[i], x30") \ - : [i] "+&r" (x0), [v] "+Q" (v->counter) \ - : "r" (x1) \ - : __LL_SC_CLOBBERS, ##cl); \ + " ldadd" #mb " %[i], %x[tmp], %[v]\n" \ + " add %[i], %[i], %x[tmp]" \ + : [i] "+&r" (i), [v] "+Q" (v->counter), [tmp] "=&r" (tmp) \ + : "r" (v) \ + : cl); \ \ - return x0; \ + return i; \ } ATOMIC64_OP_SUB_RETURN(_relaxed, ) @@ -381,23 +281,16 @@ ATOMIC64_OP_SUB_RETURN( , al, "memory") #undef ATOMIC64_OP_SUB_RETURN #define ATOMIC64_FETCH_OP_SUB(name, mb, cl...) \ -static inline long arch_atomic64_fetch_sub##name(long i, atomic64_t *v) \ +static inline long __lse_atomic64_fetch_sub##name(s64 i, atomic64_t *v) \ { \ - register long x0 asm ("x0") = i; \ - register atomic64_t *x1 asm ("x1") = v; \ - \ - asm volatile(ARM64_LSE_ATOMIC_INSN( \ - /* LL/SC */ \ - __LL_SC_ATOMIC64(fetch_sub##name) \ - __nops(1), \ - /* LSE atomics */ \ + asm volatile( \ " neg %[i], %[i]\n" \ - " ldadd" #mb " %[i], %[i], %[v]") \ - : [i] "+&r" (x0), [v] "+Q" (v->counter) \ - : "r" (x1) \ - : __LL_SC_CLOBBERS, ##cl); \ + " ldadd" #mb " %[i], %[i], %[v]" \ + : [i] "+&r" (i), [v] "+Q" (v->counter) \ + : "r" (v) \ + : cl); \ \ - return x0; \ + return i; \ } ATOMIC64_FETCH_OP_SUB(_relaxed, ) @@ -407,54 +300,44 @@ ATOMIC64_FETCH_OP_SUB( , al, "memory") #undef ATOMIC64_FETCH_OP_SUB -static inline long arch_atomic64_dec_if_positive(atomic64_t *v) +static inline s64 __lse_atomic64_dec_if_positive(atomic64_t *v) { - register long x0 asm ("x0") = (long)v; - - asm volatile(ARM64_LSE_ATOMIC_INSN( - /* LL/SC */ - __LL_SC_ATOMIC64(dec_if_positive) - __nops(6), - /* LSE atomics */ - "1: ldr x30, %[v]\n" - " subs %[ret], x30, #1\n" + unsigned long tmp; + + asm volatile( + "1: ldr %x[tmp], %[v]\n" + " subs %[ret], %x[tmp], #1\n" " b.lt 2f\n" - " casal x30, %[ret], %[v]\n" - " sub x30, x30, #1\n" - " sub x30, x30, %[ret]\n" - " cbnz x30, 1b\n" - "2:") - : [ret] "+&r" (x0), [v] "+Q" (v->counter) + " casal %x[tmp], %[ret], %[v]\n" + " sub %x[tmp], %x[tmp], #1\n" + " sub %x[tmp], %x[tmp], %[ret]\n" + " cbnz %x[tmp], 1b\n" + "2:" + : [ret] "+&r" (v), [v] "+Q" (v->counter), [tmp] "=&r" (tmp) : - : __LL_SC_CLOBBERS, "cc", "memory"); + : "cc", "memory"); - return x0; + return (long)v; } -#undef __LL_SC_ATOMIC64 - -#define __LL_SC_CMPXCHG(op) __LL_SC_CALL(__cmpxchg_case_##op) - #define __CMPXCHG_CASE(w, sfx, name, sz, mb, cl...) \ -static inline u##sz __cmpxchg_case_##name##sz(volatile void *ptr, \ +static inline u##sz __lse__cmpxchg_case_##name##sz(volatile void *ptr, \ u##sz old, \ u##sz new) \ { \ register unsigned long x0 asm ("x0") = (unsigned long)ptr; \ register u##sz x1 asm ("x1") = old; \ register u##sz x2 asm ("x2") = new; \ + unsigned long tmp; \ \ - asm volatile(ARM64_LSE_ATOMIC_INSN( \ - /* LL/SC */ \ - __LL_SC_CMPXCHG(name##sz) \ - __nops(2), \ - /* LSE atomics */ \ - " mov " #w "30, %" #w "[old]\n" \ - " cas" #mb #sfx "\t" #w "30, %" #w "[new], %[v]\n" \ - " mov %" #w "[ret], " #w "30") \ - : [ret] "+r" (x0), [v] "+Q" (*(unsigned long *)ptr) \ + asm volatile( \ + " mov %" #w "[tmp], %" #w "[old]\n" \ + " cas" #mb #sfx "\t%" #w "[tmp], %" #w "[new], %[v]\n" \ + " mov %" #w "[ret], %" #w "[tmp]" \ + : [ret] "+r" (x0), [v] "+Q" (*(unsigned long *)ptr), \ + [tmp] "=&r" (tmp) \ : [old] "r" (x1), [new] "r" (x2) \ - : __LL_SC_CLOBBERS, ##cl); \ + : cl); \ \ return x0; \ } @@ -476,13 +359,10 @@ __CMPXCHG_CASE(w, h, mb_, 16, al, "memory") __CMPXCHG_CASE(w, , mb_, 32, al, "memory") __CMPXCHG_CASE(x, , mb_, 64, al, "memory") -#undef __LL_SC_CMPXCHG #undef __CMPXCHG_CASE -#define __LL_SC_CMPXCHG_DBL(op) __LL_SC_CALL(__cmpxchg_double##op) - #define __CMPXCHG_DBL(name, mb, cl...) \ -static inline long __cmpxchg_double##name(unsigned long old1, \ +static inline long __lse__cmpxchg_double##name(unsigned long old1, \ unsigned long old2, \ unsigned long new1, \ unsigned long new2, \ @@ -496,20 +376,16 @@ static inline long __cmpxchg_double##name(unsigned long old1, \ register unsigned long x3 asm ("x3") = new2; \ register unsigned long x4 asm ("x4") = (unsigned long)ptr; \ \ - asm volatile(ARM64_LSE_ATOMIC_INSN( \ - /* LL/SC */ \ - __LL_SC_CMPXCHG_DBL(name) \ - __nops(3), \ - /* LSE atomics */ \ + asm volatile( \ " casp" #mb "\t%[old1], %[old2], %[new1], %[new2], %[v]\n"\ " eor %[old1], %[old1], %[oldval1]\n" \ " eor %[old2], %[old2], %[oldval2]\n" \ - " orr %[old1], %[old1], %[old2]") \ + " orr %[old1], %[old1], %[old2]" \ : [old1] "+&r" (x0), [old2] "+&r" (x1), \ [v] "+Q" (*(unsigned long *)ptr) \ : [new1] "r" (x2), [new2] "r" (x3), [ptr] "r" (x4), \ [oldval1] "r" (oldval1), [oldval2] "r" (oldval2) \ - : __LL_SC_CLOBBERS, ##cl); \ + : cl); \ \ return x0; \ } @@ -517,7 +393,6 @@ static inline long __cmpxchg_double##name(unsigned long old1, \ __CMPXCHG_DBL( , ) __CMPXCHG_DBL(_mb, al, "memory") -#undef __LL_SC_CMPXCHG_DBL #undef __CMPXCHG_DBL #endif /* __ASM_ATOMIC_LSE_H */ diff --git a/arch/arm64/include/asm/cache.h b/arch/arm64/include/asm/cache.h index a05db636981a..43da6dd29592 100644 --- a/arch/arm64/include/asm/cache.h +++ b/arch/arm64/include/asm/cache.h @@ -78,14 +78,17 @@ static inline u32 cache_type_cwg(void) return (read_cpuid_cachetype() >> CTR_CWG_SHIFT) & CTR_CWG_MASK; } -#define __read_mostly __attribute__((__section__(".data..read_mostly"))) +#define __read_mostly __section(.data..read_mostly) -static inline int cache_line_size(void) +static inline int cache_line_size_of_cpu(void) { u32 cwg = cache_type_cwg(); + return cwg ? 4 << cwg : ARCH_DMA_MINALIGN; } +int cache_line_size(void); + /* * Read the effective value of CTR_EL0. * diff --git a/arch/arm64/include/asm/cacheflush.h b/arch/arm64/include/asm/cacheflush.h index 1fe4467442aa..665c78e0665a 100644 --- a/arch/arm64/include/asm/cacheflush.h +++ b/arch/arm64/include/asm/cacheflush.h @@ -176,4 +176,7 @@ static inline void flush_cache_vunmap(unsigned long start, unsigned long end) int set_memory_valid(unsigned long addr, int numpages, int enable); +int set_direct_map_invalid_noflush(struct page *page); +int set_direct_map_default_noflush(struct page *page); + #endif diff --git a/arch/arm64/include/asm/cmpxchg.h b/arch/arm64/include/asm/cmpxchg.h index 7a299a20f6dc..f9bef42c1411 100644 --- a/arch/arm64/include/asm/cmpxchg.h +++ b/arch/arm64/include/asm/cmpxchg.h @@ -10,7 +10,6 @@ #include <linux/build_bug.h> #include <linux/compiler.h> -#include <asm/atomic.h> #include <asm/barrier.h> #include <asm/lse.h> @@ -63,7 +62,7 @@ __XCHG_CASE( , , mb_, 64, dmb ish, nop, , a, l, "memory") #undef __XCHG_CASE #define __XCHG_GEN(sfx) \ -static inline unsigned long __xchg##sfx(unsigned long x, \ +static __always_inline unsigned long __xchg##sfx(unsigned long x, \ volatile void *ptr, \ int size) \ { \ @@ -104,8 +103,52 @@ __XCHG_GEN(_mb) #define arch_xchg_release(...) __xchg_wrapper(_rel, __VA_ARGS__) #define arch_xchg(...) __xchg_wrapper( _mb, __VA_ARGS__) +#define __CMPXCHG_CASE(name, sz) \ +static inline u##sz __cmpxchg_case_##name##sz(volatile void *ptr, \ + u##sz old, \ + u##sz new) \ +{ \ + return __lse_ll_sc_body(_cmpxchg_case_##name##sz, \ + ptr, old, new); \ +} + +__CMPXCHG_CASE( , 8) +__CMPXCHG_CASE( , 16) +__CMPXCHG_CASE( , 32) +__CMPXCHG_CASE( , 64) +__CMPXCHG_CASE(acq_, 8) +__CMPXCHG_CASE(acq_, 16) +__CMPXCHG_CASE(acq_, 32) +__CMPXCHG_CASE(acq_, 64) +__CMPXCHG_CASE(rel_, 8) +__CMPXCHG_CASE(rel_, 16) +__CMPXCHG_CASE(rel_, 32) +__CMPXCHG_CASE(rel_, 64) +__CMPXCHG_CASE(mb_, 8) +__CMPXCHG_CASE(mb_, 16) +__CMPXCHG_CASE(mb_, 32) +__CMPXCHG_CASE(mb_, 64) + +#undef __CMPXCHG_CASE + +#define __CMPXCHG_DBL(name) \ +static inline long __cmpxchg_double##name(unsigned long old1, \ + unsigned long old2, \ + unsigned long new1, \ + unsigned long new2, \ + volatile void *ptr) \ +{ \ + return __lse_ll_sc_body(_cmpxchg_double##name, \ + old1, old2, new1, new2, ptr); \ +} + +__CMPXCHG_DBL( ) +__CMPXCHG_DBL(_mb) + +#undef __CMPXCHG_DBL + #define __CMPXCHG_GEN(sfx) \ -static inline unsigned long __cmpxchg##sfx(volatile void *ptr, \ +static __always_inline unsigned long __cmpxchg##sfx(volatile void *ptr, \ unsigned long old, \ unsigned long new, \ int size) \ @@ -212,7 +255,7 @@ __CMPWAIT_CASE( , , 64); #undef __CMPWAIT_CASE #define __CMPWAIT_GEN(sfx) \ -static inline void __cmpwait##sfx(volatile void *ptr, \ +static __always_inline void __cmpwait##sfx(volatile void *ptr, \ unsigned long val, \ int size) \ { \ diff --git a/arch/arm64/include/asm/compat.h b/arch/arm64/include/asm/compat.h index fb8ad4616b3b..b0d53a265f1d 100644 --- a/arch/arm64/include/asm/compat.h +++ b/arch/arm64/include/asm/compat.h @@ -4,7 +4,6 @@ */ #ifndef __ASM_COMPAT_H #define __ASM_COMPAT_H -#ifdef __KERNEL__ #ifdef CONFIG_COMPAT /* @@ -215,5 +214,4 @@ static inline int is_compat_thread(struct thread_info *thread) } #endif /* CONFIG_COMPAT */ -#endif /* __KERNEL__ */ #endif /* __ASM_COMPAT_H */ diff --git a/arch/arm64/include/asm/cpu_ops.h b/arch/arm64/include/asm/cpu_ops.h index c09d633c3109..86aabf1e0199 100644 --- a/arch/arm64/include/asm/cpu_ops.h +++ b/arch/arm64/include/asm/cpu_ops.h @@ -23,6 +23,8 @@ * @cpu_boot: Boots a cpu into the kernel. * @cpu_postboot: Optionally, perform any post-boot cleanup or necesary * synchronisation. Called from the cpu being booted. + * @cpu_can_disable: Determines whether a CPU can be disabled based on + * mechanism-specific information. * @cpu_disable: Prepares a cpu to die. May fail for some mechanism-specific * reason, which will cause the hot unplug to be aborted. Called * from the cpu to be killed. @@ -42,6 +44,7 @@ struct cpu_operations { int (*cpu_boot)(unsigned int); void (*cpu_postboot)(void); #ifdef CONFIG_HOTPLUG_CPU + bool (*cpu_can_disable)(unsigned int cpu); int (*cpu_disable)(unsigned int cpu); void (*cpu_die)(unsigned int cpu); int (*cpu_kill)(unsigned int cpu); diff --git a/arch/arm64/include/asm/cpufeature.h b/arch/arm64/include/asm/cpufeature.h index 373799b7982f..9cde5d2e768f 100644 --- a/arch/arm64/include/asm/cpufeature.h +++ b/arch/arm64/include/asm/cpufeature.h @@ -35,9 +35,10 @@ */ enum ftr_type { - FTR_EXACT, /* Use a predefined safe value */ - FTR_LOWER_SAFE, /* Smaller value is safe */ - FTR_HIGHER_SAFE,/* Bigger value is safe */ + FTR_EXACT, /* Use a predefined safe value */ + FTR_LOWER_SAFE, /* Smaller value is safe */ + FTR_HIGHER_SAFE, /* Bigger value is safe */ + FTR_HIGHER_OR_ZERO_SAFE, /* Bigger value is safe, but 0 is biggest */ }; #define FTR_STRICT true /* SANITY check strict matching required */ @@ -288,9 +289,16 @@ struct arm64_cpu_capabilities { u16 type; bool (*matches)(const struct arm64_cpu_capabilities *caps, int scope); /* - * Take the appropriate actions to enable this capability for this CPU. - * For each successfully booted CPU, this method is called for each - * globally detected capability. + * Take the appropriate actions to configure this capability + * for this CPU. If the capability is detected by the kernel + * this will be called on all the CPUs in the system, + * including the hotplugged CPUs, regardless of whether the + * capability is available on that specific CPU. This is + * useful for some capabilities (e.g, working around CPU + * errata), where all the CPUs must take some action (e.g, + * changing system control/configuration). Thus, if an action + * is required only if the CPU has the capability, then the + * routine must check it before taking any action. */ void (*cpu_enable)(const struct arm64_cpu_capabilities *cap); union { @@ -362,21 +370,6 @@ cpucap_multi_entry_cap_matches(const struct arm64_cpu_capabilities *entry, return false; } -/* - * Take appropriate action for all matching entries in the shared capability - * entry. - */ -static inline void -cpucap_multi_entry_cap_cpu_enable(const struct arm64_cpu_capabilities *entry) -{ - const struct arm64_cpu_capabilities *caps; - - for (caps = entry->match_list; caps->matches; caps++) - if (caps->matches(caps, SCOPE_LOCAL_CPU) && - caps->cpu_enable) - caps->cpu_enable(caps); -} - extern DECLARE_BITMAP(cpu_hwcaps, ARM64_NCAPS); extern struct static_key_false cpu_hwcap_keys[ARM64_NCAPS]; extern struct static_key_false arm64_const_caps_ready; @@ -614,6 +607,18 @@ static inline bool system_uses_irq_prio_masking(void) cpus_have_const_cap(ARM64_HAS_IRQ_PRIO_MASKING); } +static inline bool system_has_prio_mask_debugging(void) +{ + return IS_ENABLED(CONFIG_ARM64_DEBUG_PRIORITY_MASKING) && + system_uses_irq_prio_masking(); +} + +#define ARM64_BP_HARDEN_UNKNOWN -1 +#define ARM64_BP_HARDEN_WA_NEEDED 0 +#define ARM64_BP_HARDEN_NOT_REQUIRED 1 + +int get_spectre_v2_workaround_state(void); + #define ARM64_SSBD_UNKNOWN -1 #define ARM64_SSBD_FORCE_DISABLE 0 #define ARM64_SSBD_KERNEL 1 diff --git a/arch/arm64/include/asm/cputype.h b/arch/arm64/include/asm/cputype.h index e7d46631cc42..b1454d117cd2 100644 --- a/arch/arm64/include/asm/cputype.h +++ b/arch/arm64/include/asm/cputype.h @@ -51,14 +51,6 @@ #define MIDR_CPU_MODEL_MASK (MIDR_IMPLEMENTOR_MASK | MIDR_PARTNUM_MASK | \ MIDR_ARCHITECTURE_MASK) -#define MIDR_IS_CPU_MODEL_RANGE(midr, model, rv_min, rv_max) \ -({ \ - u32 _model = (midr) & MIDR_CPU_MODEL_MASK; \ - u32 rv = (midr) & (MIDR_REVISION_MASK | MIDR_VARIANT_MASK); \ - \ - _model == (model) && rv >= (rv_min) && rv <= (rv_max); \ - }) - #define ARM_CPU_IMP_ARM 0x41 #define ARM_CPU_IMP_APM 0x50 #define ARM_CPU_IMP_CAVIUM 0x43 @@ -159,10 +151,19 @@ struct midr_range { #define MIDR_REV(m, v, r) MIDR_RANGE(m, v, r, v, r) #define MIDR_ALL_VERSIONS(m) MIDR_RANGE(m, 0, 0, 0xf, 0xf) +static inline bool midr_is_cpu_model_range(u32 midr, u32 model, u32 rv_min, + u32 rv_max) +{ + u32 _model = midr & MIDR_CPU_MODEL_MASK; + u32 rv = midr & (MIDR_REVISION_MASK | MIDR_VARIANT_MASK); + + return _model == model && rv >= rv_min && rv <= rv_max; +} + static inline bool is_midr_in_range(u32 midr, struct midr_range const *range) { - return MIDR_IS_CPU_MODEL_RANGE(midr, range->model, - range->rv_min, range->rv_max); + return midr_is_cpu_model_range(midr, range->model, + range->rv_min, range->rv_max); } static inline bool diff --git a/arch/arm64/include/asm/daifflags.h b/arch/arm64/include/asm/daifflags.h index 6dd8a8723525..063c964af705 100644 --- a/arch/arm64/include/asm/daifflags.h +++ b/arch/arm64/include/asm/daifflags.h @@ -7,20 +7,32 @@ #include <linux/irqflags.h> +#include <asm/arch_gicv3.h> #include <asm/cpufeature.h> #define DAIF_PROCCTX 0 #define DAIF_PROCCTX_NOIRQ PSR_I_BIT #define DAIF_ERRCTX (PSR_I_BIT | PSR_A_BIT) +#define DAIF_MASK (PSR_D_BIT | PSR_A_BIT | PSR_I_BIT | PSR_F_BIT) + /* mask/save/unmask/restore all exceptions, including interrupts. */ static inline void local_daif_mask(void) { + WARN_ON(system_has_prio_mask_debugging() && + (read_sysreg_s(SYS_ICC_PMR_EL1) == (GIC_PRIO_IRQOFF | + GIC_PRIO_PSR_I_SET))); + asm volatile( "msr daifset, #0xf // local_daif_mask\n" : : : "memory"); + + /* Don't really care for a dsb here, we don't intend to enable IRQs */ + if (system_uses_irq_prio_masking()) + gic_write_pmr(GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET); + trace_hardirqs_off(); } @@ -32,7 +44,7 @@ static inline unsigned long local_daif_save(void) if (system_uses_irq_prio_masking()) { /* If IRQs are masked with PMR, reflect it in the flags */ - if (read_sysreg_s(SYS_ICC_PMR_EL1) <= GIC_PRIO_IRQOFF) + if (read_sysreg_s(SYS_ICC_PMR_EL1) != GIC_PRIO_IRQON) flags |= PSR_I_BIT; } @@ -45,39 +57,50 @@ static inline void local_daif_restore(unsigned long flags) { bool irq_disabled = flags & PSR_I_BIT; + WARN_ON(system_has_prio_mask_debugging() && + !(read_sysreg(daif) & PSR_I_BIT)); + if (!irq_disabled) { trace_hardirqs_on(); - if (system_uses_irq_prio_masking()) - arch_local_irq_enable(); - } else if (!(flags & PSR_A_BIT)) { - /* - * If interrupts are disabled but we can take - * asynchronous errors, we can take NMIs - */ if (system_uses_irq_prio_masking()) { - flags &= ~PSR_I_BIT; + gic_write_pmr(GIC_PRIO_IRQON); + dsb(sy); + } + } else if (system_uses_irq_prio_masking()) { + u64 pmr; + + if (!(flags & PSR_A_BIT)) { /* - * There has been concern that the write to daif - * might be reordered before this write to PMR. - * From the ARM ARM DDI 0487D.a, section D1.7.1 - * "Accessing PSTATE fields": - * Writes to the PSTATE fields have side-effects on - * various aspects of the PE operation. All of these - * side-effects are guaranteed: - * - Not to be visible to earlier instructions in - * the execution stream. - * - To be visible to later instructions in the - * execution stream - * - * Also, writes to PMR are self-synchronizing, so no - * interrupts with a lower priority than PMR is signaled - * to the PE after the write. - * - * So we don't need additional synchronization here. + * If interrupts are disabled but we can take + * asynchronous errors, we can take NMIs */ - arch_local_irq_disable(); + flags &= ~PSR_I_BIT; + pmr = GIC_PRIO_IRQOFF; + } else { + pmr = GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET; } + + /* + * There has been concern that the write to daif + * might be reordered before this write to PMR. + * From the ARM ARM DDI 0487D.a, section D1.7.1 + * "Accessing PSTATE fields": + * Writes to the PSTATE fields have side-effects on + * various aspects of the PE operation. All of these + * side-effects are guaranteed: + * - Not to be visible to earlier instructions in + * the execution stream. + * - To be visible to later instructions in the + * execution stream + * + * Also, writes to PMR are self-synchronizing, so no + * interrupts with a lower priority than PMR is signaled + * to the PE after the write. + * + * So we don't need additional synchronization here. + */ + gic_write_pmr(pmr); } write_sysreg(flags, daif); diff --git a/arch/arm64/include/asm/debug-monitors.h b/arch/arm64/include/asm/debug-monitors.h index d8ec5bb881c2..7619f473155f 100644 --- a/arch/arm64/include/asm/debug-monitors.h +++ b/arch/arm64/include/asm/debug-monitors.h @@ -5,8 +5,6 @@ #ifndef __ASM_DEBUG_MONITORS_H #define __ASM_DEBUG_MONITORS_H -#ifdef __KERNEL__ - #include <linux/errno.h> #include <linux/types.h> #include <asm/brk-imm.h> @@ -128,5 +126,4 @@ static inline int reinstall_suspended_bps(struct pt_regs *regs) int aarch32_break_handler(struct pt_regs *regs); #endif /* __ASSEMBLY */ -#endif /* __KERNEL__ */ #endif /* __ASM_DEBUG_MONITORS_H */ diff --git a/arch/arm64/include/asm/dma-mapping.h b/arch/arm64/include/asm/dma-mapping.h deleted file mode 100644 index bdcb0922a40c..000000000000 --- a/arch/arm64/include/asm/dma-mapping.h +++ /dev/null @@ -1,31 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) 2012 ARM Ltd. - */ -#ifndef __ASM_DMA_MAPPING_H -#define __ASM_DMA_MAPPING_H - -#ifdef __KERNEL__ - -#include <linux/types.h> -#include <linux/vmalloc.h> - -#include <xen/xen.h> -#include <asm/xen/hypervisor.h> - -static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus) -{ - return NULL; -} - -/* - * Do not use this function in a driver, it is only provided for - * arch/arm/mm/xen.c, which is used by arm64 as well. - */ -static inline bool is_device_dma_coherent(struct device *dev) -{ - return dev->dma_coherent; -} - -#endif /* __KERNEL__ */ -#endif /* __ASM_DMA_MAPPING_H */ diff --git a/arch/arm64/include/asm/efi.h b/arch/arm64/include/asm/efi.h index c9e9a6978e73..b54d3a86c444 100644 --- a/arch/arm64/include/asm/efi.h +++ b/arch/arm64/include/asm/efi.h @@ -79,18 +79,18 @@ static inline unsigned long efi_get_max_fdt_addr(unsigned long dram_base) /* * On arm64, we have to ensure that the initrd ends up in the linear region, - * which is a 1 GB aligned region of size '1UL << (VA_BITS - 1)' that is + * which is a 1 GB aligned region of size '1UL << (VA_BITS_MIN - 1)' that is * guaranteed to cover the kernel Image. * * Since the EFI stub is part of the kernel Image, we can relax the - * usual requirements in Documentation/arm64/booting.txt, which still + * usual requirements in Documentation/arm64/booting.rst, which still * apply to other bootloaders, and are required for some kernel * configurations. */ static inline unsigned long efi_get_max_initrd_addr(unsigned long dram_base, unsigned long image_addr) { - return (image_addr & ~(SZ_1G - 1UL)) + (1UL << (VA_BITS - 1)); + return (image_addr & ~(SZ_1G - 1UL)) + (1UL << (VA_BITS_MIN - 1)); } #define efi_call_early(f, ...) sys_table_arg->boottime->f(__VA_ARGS__) @@ -105,7 +105,11 @@ static inline unsigned long efi_get_max_initrd_addr(unsigned long dram_base, ((protocol##_t *)instance)->f(instance, ##__VA_ARGS__) #define alloc_screen_info(x...) &screen_info -#define free_screen_info(x...) + +static inline void free_screen_info(efi_system_table_t *sys_table_arg, + struct screen_info *si) +{ +} /* redeclare as 'hidden' so the compiler will generate relative references */ extern struct screen_info screen_info __attribute__((__visibility__("hidden"))); diff --git a/arch/arm64/include/asm/elf.h b/arch/arm64/include/asm/elf.h index 325d9515c0f8..b618017205a3 100644 --- a/arch/arm64/include/asm/elf.h +++ b/arch/arm64/include/asm/elf.h @@ -202,7 +202,21 @@ typedef compat_elf_greg_t compat_elf_gregset_t[COMPAT_ELF_NGREG]; ({ \ set_thread_flag(TIF_32BIT); \ }) +#ifdef CONFIG_COMPAT_VDSO +#define COMPAT_ARCH_DLINFO \ +do { \ + /* \ + * Note that we use Elf64_Off instead of elf_addr_t because \ + * elf_addr_t in compat is defined as Elf32_Addr and casting \ + * current->mm->context.vdso to it triggers a cast warning of \ + * cast from pointer to integer of different size. \ + */ \ + NEW_AUX_ENT(AT_SYSINFO_EHDR, \ + (Elf64_Off)current->mm->context.vdso); \ +} while (0) +#else #define COMPAT_ARCH_DLINFO +#endif extern int aarch32_setup_additional_pages(struct linux_binprm *bprm, int uses_interp); #define compat_arch_setup_additional_pages \ diff --git a/arch/arm64/include/asm/esr.h b/arch/arm64/include/asm/esr.h index 65ac18400979..cb29253ae86b 100644 --- a/arch/arm64/include/asm/esr.h +++ b/arch/arm64/include/asm/esr.h @@ -34,7 +34,8 @@ #define ESR_ELx_EC_SMC64 (0x17) /* EL2 and above */ #define ESR_ELx_EC_SYS64 (0x18) #define ESR_ELx_EC_SVE (0x19) -/* Unallocated EC: 0x1A - 0x1E */ +#define ESR_ELx_EC_ERET (0x1a) /* EL2 only */ +/* Unallocated EC: 0x1b - 0x1E */ #define ESR_ELx_EC_IMP_DEF (0x1f) /* EL3 only */ #define ESR_ELx_EC_IABT_LOW (0x20) #define ESR_ELx_EC_IABT_CUR (0x21) diff --git a/arch/arm64/include/asm/exception.h b/arch/arm64/include/asm/exception.h index ed57b760f38c..a17393ff6677 100644 --- a/arch/arm64/include/asm/exception.h +++ b/arch/arm64/include/asm/exception.h @@ -30,4 +30,6 @@ static inline u32 disr_to_esr(u64 disr) return esr; } +asmlinkage void enter_from_user_mode(void); + #endif /* __ASM_EXCEPTION_H */ diff --git a/arch/arm64/include/asm/fpsimd.h b/arch/arm64/include/asm/fpsimd.h index 897029c8e9b5..59f10dd13f12 100644 --- a/arch/arm64/include/asm/fpsimd.h +++ b/arch/arm64/include/asm/fpsimd.h @@ -21,7 +21,7 @@ #include <linux/stddef.h> #include <linux/types.h> -#if defined(__KERNEL__) && defined(CONFIG_COMPAT) +#ifdef CONFIG_COMPAT /* Masks for extracting the FPSR and FPCR from the FPSCR */ #define VFP_FPSCR_STAT_MASK 0xf800009f #define VFP_FPSCR_CTRL_MASK 0x07f79f00 @@ -37,8 +37,6 @@ struct task_struct; extern void fpsimd_save_state(struct user_fpsimd_state *state); extern void fpsimd_load_state(struct user_fpsimd_state *state); -extern void fpsimd_save(void); - extern void fpsimd_thread_switch(struct task_struct *next); extern void fpsimd_flush_thread(void); @@ -52,8 +50,7 @@ extern void fpsimd_bind_state_to_cpu(struct user_fpsimd_state *state, void *sve_state, unsigned int sve_vl); extern void fpsimd_flush_task_state(struct task_struct *target); -extern void fpsimd_flush_cpu_state(void); -extern void sve_flush_cpu_state(void); +extern void fpsimd_save_and_flush_cpu_state(void); /* Maximum VL that SVE VL-agnostic software can transparently support */ #define SVE_VL_ARCH_MAX 0x100 diff --git a/arch/arm64/include/asm/ftrace.h b/arch/arm64/include/asm/ftrace.h index 5ab5200b2bdc..d48667b04c41 100644 --- a/arch/arm64/include/asm/ftrace.h +++ b/arch/arm64/include/asm/ftrace.h @@ -14,6 +14,19 @@ #define MCOUNT_ADDR ((unsigned long)_mcount) #define MCOUNT_INSN_SIZE AARCH64_INSN_SIZE +/* + * Currently, gcc tends to save the link register after the local variables + * on the stack. This causes the max stack tracer to report the function + * frame sizes for the wrong functions. By defining + * ARCH_FTRACE_SHIFT_STACK_TRACER, it will tell the stack tracer to expect + * to find the return address on the stack after the local variables have + * been set up. + * + * Note, this may change in the future, and we will need to deal with that + * if it were to happen. + */ +#define ARCH_FTRACE_SHIFT_STACK_TRACER 1 + #ifndef __ASSEMBLY__ #include <linux/compat.h> diff --git a/arch/arm64/include/asm/futex.h b/arch/arm64/include/asm/futex.h index 6211e3105491..6cc26a127819 100644 --- a/arch/arm64/include/asm/futex.h +++ b/arch/arm64/include/asm/futex.h @@ -5,8 +5,6 @@ #ifndef __ASM_FUTEX_H #define __ASM_FUTEX_H -#ifdef __KERNEL__ - #include <linux/futex.h> #include <linux/uaccess.h> @@ -129,5 +127,4 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *_uaddr, return ret; } -#endif /* __KERNEL__ */ #endif /* __ASM_FUTEX_H */ diff --git a/arch/arm64/include/asm/hw_breakpoint.h b/arch/arm64/include/asm/hw_breakpoint.h index db9ab760e6fd..bc7aaed4b34e 100644 --- a/arch/arm64/include/asm/hw_breakpoint.h +++ b/arch/arm64/include/asm/hw_breakpoint.h @@ -10,8 +10,6 @@ #include <asm/sysreg.h> #include <asm/virt.h> -#ifdef __KERNEL__ - struct arch_hw_breakpoint_ctrl { u32 __reserved : 19, len : 8, @@ -156,5 +154,4 @@ static inline int get_num_wrps(void) ID_AA64DFR0_WRPS_SHIFT); } -#endif /* __KERNEL__ */ #endif /* __ASM_BREAKPOINT_H */ diff --git a/arch/arm64/include/asm/hwcap.h b/arch/arm64/include/asm/hwcap.h index e5d9420cd258..3d2f2472a36c 100644 --- a/arch/arm64/include/asm/hwcap.h +++ b/arch/arm64/include/asm/hwcap.h @@ -84,6 +84,8 @@ #define KERNEL_HWCAP_SVEBITPERM __khwcap2_feature(SVEBITPERM) #define KERNEL_HWCAP_SVESHA3 __khwcap2_feature(SVESHA3) #define KERNEL_HWCAP_SVESM4 __khwcap2_feature(SVESM4) +#define KERNEL_HWCAP_FLAGM2 __khwcap2_feature(FLAGM2) +#define KERNEL_HWCAP_FRINT __khwcap2_feature(FRINT) /* * This yields a mask that user programs can use to figure out what diff --git a/arch/arm64/include/asm/image.h b/arch/arm64/include/asm/image.h index e2c27a2278e9..c2b13213c720 100644 --- a/arch/arm64/include/asm/image.h +++ b/arch/arm64/include/asm/image.h @@ -27,7 +27,7 @@ /* * struct arm64_image_header - arm64 kernel image header - * See Documentation/arm64/booting.txt for details + * See Documentation/arm64/booting.rst for details * * @code0: Executable code, or * @mz_header alternatively used for part of MZ header diff --git a/arch/arm64/include/asm/io.h b/arch/arm64/include/asm/io.h index 7ed92626949d..323cb306bd28 100644 --- a/arch/arm64/include/asm/io.h +++ b/arch/arm64/include/asm/io.h @@ -8,8 +8,6 @@ #ifndef __ASM_IO_H #define __ASM_IO_H -#ifdef __KERNEL__ - #include <linux/types.h> #include <asm/byteorder.h> @@ -97,7 +95,7 @@ static inline u64 __raw_readq(const volatile void __iomem *addr) ({ \ unsigned long tmp; \ \ - rmb(); \ + dma_rmb(); \ \ /* \ * Create a dummy control dependency from the IO read to any \ @@ -111,7 +109,7 @@ static inline u64 __raw_readq(const volatile void __iomem *addr) }) #define __io_par(v) __iormb(v) -#define __iowmb() wmb() +#define __iowmb() dma_wmb() /* * Relaxed I/O memory access primitives. These follow the Device memory @@ -165,14 +163,13 @@ extern void __memset_io(volatile void __iomem *, int, size_t); * I/O memory mapping functions. */ extern void __iomem *__ioremap(phys_addr_t phys_addr, size_t size, pgprot_t prot); -extern void __iounmap(volatile void __iomem *addr); +extern void iounmap(volatile void __iomem *addr); extern void __iomem *ioremap_cache(phys_addr_t phys_addr, size_t size); #define ioremap(addr, size) __ioremap((addr), (size), __pgprot(PROT_DEVICE_nGnRE)) #define ioremap_nocache(addr, size) __ioremap((addr), (size), __pgprot(PROT_DEVICE_nGnRE)) #define ioremap_wc(addr, size) __ioremap((addr), (size), __pgprot(PROT_NORMAL_NC)) #define ioremap_wt(addr, size) __ioremap((addr), (size), __pgprot(PROT_DEVICE_nGnRE)) -#define iounmap __iounmap /* * PCI configuration space mapping function. @@ -207,5 +204,4 @@ extern int valid_mmap_phys_addr_range(unsigned long pfn, size_t size); extern int devmem_is_allowed(unsigned long pfn); -#endif /* __KERNEL__ */ #endif /* __ASM_IO_H */ diff --git a/arch/arm64/include/asm/irqflags.h b/arch/arm64/include/asm/irqflags.h index 66853fde60f9..1a59f0ed1ae3 100644 --- a/arch/arm64/include/asm/irqflags.h +++ b/arch/arm64/include/asm/irqflags.h @@ -5,8 +5,6 @@ #ifndef __ASM_IRQFLAGS_H #define __ASM_IRQFLAGS_H -#ifdef __KERNEL__ - #include <asm/alternative.h> #include <asm/ptrace.h> #include <asm/sysreg.h> @@ -29,6 +27,12 @@ */ static inline void arch_local_irq_enable(void) { + if (system_has_prio_mask_debugging()) { + u32 pmr = read_sysreg_s(SYS_ICC_PMR_EL1); + + WARN_ON_ONCE(pmr != GIC_PRIO_IRQON && pmr != GIC_PRIO_IRQOFF); + } + asm volatile(ALTERNATIVE( "msr daifclr, #2 // arch_local_irq_enable\n" "nop", @@ -42,6 +46,12 @@ static inline void arch_local_irq_enable(void) static inline void arch_local_irq_disable(void) { + if (system_has_prio_mask_debugging()) { + u32 pmr = read_sysreg_s(SYS_ICC_PMR_EL1); + + WARN_ON_ONCE(pmr != GIC_PRIO_IRQON && pmr != GIC_PRIO_IRQOFF); + } + asm volatile(ALTERNATIVE( "msr daifset, #2 // arch_local_irq_disable", __msr_s(SYS_ICC_PMR_EL1, "%0"), @@ -56,43 +66,46 @@ static inline void arch_local_irq_disable(void) */ static inline unsigned long arch_local_save_flags(void) { - unsigned long daif_bits; unsigned long flags; - daif_bits = read_sysreg(daif); - - /* - * The asm is logically equivalent to: - * - * if (system_uses_irq_prio_masking()) - * flags = (daif_bits & PSR_I_BIT) ? - * GIC_PRIO_IRQOFF : - * read_sysreg_s(SYS_ICC_PMR_EL1); - * else - * flags = daif_bits; - */ asm volatile(ALTERNATIVE( - "mov %0, %1\n" - "nop\n" - "nop", - __mrs_s("%0", SYS_ICC_PMR_EL1) - "ands %1, %1, " __stringify(PSR_I_BIT) "\n" - "csel %0, %0, %2, eq", - ARM64_HAS_IRQ_PRIO_MASKING) - : "=&r" (flags), "+r" (daif_bits) - : "r" ((unsigned long) GIC_PRIO_IRQOFF) + "mrs %0, daif", + __mrs_s("%0", SYS_ICC_PMR_EL1), + ARM64_HAS_IRQ_PRIO_MASKING) + : "=&r" (flags) + : : "memory"); return flags; } +static inline int arch_irqs_disabled_flags(unsigned long flags) +{ + int res; + + asm volatile(ALTERNATIVE( + "and %w0, %w1, #" __stringify(PSR_I_BIT), + "eor %w0, %w1, #" __stringify(GIC_PRIO_IRQON), + ARM64_HAS_IRQ_PRIO_MASKING) + : "=&r" (res) + : "r" ((int) flags) + : "memory"); + + return res; +} + static inline unsigned long arch_local_irq_save(void) { unsigned long flags; flags = arch_local_save_flags(); - arch_local_irq_disable(); + /* + * There are too many states with IRQs disabled, just keep the current + * state if interrupts are already disabled/masked. + */ + if (!arch_irqs_disabled_flags(flags)) + arch_local_irq_disable(); return flags; } @@ -108,26 +121,9 @@ static inline void arch_local_irq_restore(unsigned long flags) __msr_s(SYS_ICC_PMR_EL1, "%0") "dsb sy", ARM64_HAS_IRQ_PRIO_MASKING) - : "+r" (flags) : + : "r" (flags) : "memory"); } -static inline int arch_irqs_disabled_flags(unsigned long flags) -{ - int res; - - asm volatile(ALTERNATIVE( - "and %w0, %w1, #" __stringify(PSR_I_BIT) "\n" - "nop", - "cmp %w1, #" __stringify(GIC_PRIO_IRQOFF) "\n" - "cset %w0, ls", - ARM64_HAS_IRQ_PRIO_MASKING) - : "=&r" (res) - : "r" ((int) flags) - : "memory"); - - return res; -} -#endif -#endif +#endif /* __ASM_IRQFLAGS_H */ diff --git a/arch/arm64/include/asm/kasan.h b/arch/arm64/include/asm/kasan.h index b52aacd2c526..b0dc4abc3589 100644 --- a/arch/arm64/include/asm/kasan.h +++ b/arch/arm64/include/asm/kasan.h @@ -18,11 +18,8 @@ * KASAN_SHADOW_START: beginning of the kernel virtual addresses. * KASAN_SHADOW_END: KASAN_SHADOW_START + 1/N of kernel virtual addresses, * where N = (1 << KASAN_SHADOW_SCALE_SHIFT). - */ -#define KASAN_SHADOW_START (VA_START) -#define KASAN_SHADOW_END (KASAN_SHADOW_START + KASAN_SHADOW_SIZE) - -/* + * + * KASAN_SHADOW_OFFSET: * This value is used to map an address to the corresponding shadow * address by the following formula: * shadow_addr = (address >> KASAN_SHADOW_SCALE_SHIFT) + KASAN_SHADOW_OFFSET @@ -33,8 +30,8 @@ * KASAN_SHADOW_OFFSET = KASAN_SHADOW_END - * (1ULL << (64 - KASAN_SHADOW_SCALE_SHIFT)) */ -#define KASAN_SHADOW_OFFSET (KASAN_SHADOW_END - (1ULL << \ - (64 - KASAN_SHADOW_SCALE_SHIFT))) +#define _KASAN_SHADOW_START(va) (KASAN_SHADOW_END - (1UL << ((va) - KASAN_SHADOW_SCALE_SHIFT))) +#define KASAN_SHADOW_START _KASAN_SHADOW_START(vabits_actual) void kasan_init(void); void kasan_copy_shadow(pgd_t *pgdir); diff --git a/arch/arm64/include/asm/kvm_arm.h b/arch/arm64/include/asm/kvm_arm.h index a8b205e5c4a8..ddf9d762ac62 100644 --- a/arch/arm64/include/asm/kvm_arm.h +++ b/arch/arm64/include/asm/kvm_arm.h @@ -316,9 +316,10 @@ #define kvm_arm_exception_class \ ECN(UNKNOWN), ECN(WFx), ECN(CP15_32), ECN(CP15_64), ECN(CP14_MR), \ - ECN(CP14_LS), ECN(FP_ASIMD), ECN(CP10_ID), ECN(CP14_64), ECN(SVC64), \ - ECN(HVC64), ECN(SMC64), ECN(SYS64), ECN(IMP_DEF), ECN(IABT_LOW), \ - ECN(IABT_CUR), ECN(PC_ALIGN), ECN(DABT_LOW), ECN(DABT_CUR), \ + ECN(CP14_LS), ECN(FP_ASIMD), ECN(CP10_ID), ECN(PAC), ECN(CP14_64), \ + ECN(SVC64), ECN(HVC64), ECN(SMC64), ECN(SYS64), ECN(SVE), \ + ECN(IMP_DEF), ECN(IABT_LOW), ECN(IABT_CUR), \ + ECN(PC_ALIGN), ECN(DABT_LOW), ECN(DABT_CUR), \ ECN(SP_ALIGN), ECN(FP_EXC32), ECN(FP_EXC64), ECN(SERROR), \ ECN(BREAKPT_LOW), ECN(BREAKPT_CUR), ECN(SOFTSTP_LOW), \ ECN(SOFTSTP_CUR), ECN(WATCHPT_LOW), ECN(WATCHPT_CUR), \ diff --git a/arch/arm64/include/asm/kvm_asm.h b/arch/arm64/include/asm/kvm_asm.h index 2ca437ef59fa..44a243754c1b 100644 --- a/arch/arm64/include/asm/kvm_asm.h +++ b/arch/arm64/include/asm/kvm_asm.h @@ -30,6 +30,12 @@ {ARM_EXCEPTION_TRAP, "TRAP" }, \ {ARM_EXCEPTION_HYP_GONE, "HYP_GONE" } +/* + * Size of the HYP vectors preamble. kvm_patch_vector_branch() generates code + * that jumps over this. + */ +#define KVM_VECTOR_PREAMBLE (2 * AARCH64_INSN_SIZE) + #ifndef __ASSEMBLY__ #include <linux/mm.h> diff --git a/arch/arm64/include/asm/kvm_emulate.h b/arch/arm64/include/asm/kvm_emulate.h index 034dadec7168..d69c1efc63e7 100644 --- a/arch/arm64/include/asm/kvm_emulate.h +++ b/arch/arm64/include/asm/kvm_emulate.h @@ -126,7 +126,7 @@ static inline unsigned long *__vcpu_elr_el1(const struct kvm_vcpu *vcpu) static inline unsigned long vcpu_read_elr_el1(const struct kvm_vcpu *vcpu) { if (vcpu->arch.sysregs_loaded_on_cpu) - return read_sysreg_el1(elr); + return read_sysreg_el1(SYS_ELR); else return *__vcpu_elr_el1(vcpu); } @@ -134,7 +134,7 @@ static inline unsigned long vcpu_read_elr_el1(const struct kvm_vcpu *vcpu) static inline void vcpu_write_elr_el1(const struct kvm_vcpu *vcpu, unsigned long v) { if (vcpu->arch.sysregs_loaded_on_cpu) - write_sysreg_el1(v, elr); + write_sysreg_el1(v, SYS_ELR); else *__vcpu_elr_el1(vcpu) = v; } @@ -186,7 +186,7 @@ static inline unsigned long vcpu_read_spsr(const struct kvm_vcpu *vcpu) return vcpu_read_spsr32(vcpu); if (vcpu->arch.sysregs_loaded_on_cpu) - return read_sysreg_el1(spsr); + return read_sysreg_el1(SYS_SPSR); else return vcpu_gp_regs(vcpu)->spsr[KVM_SPSR_EL1]; } @@ -199,7 +199,7 @@ static inline void vcpu_write_spsr(struct kvm_vcpu *vcpu, unsigned long v) } if (vcpu->arch.sysregs_loaded_on_cpu) - write_sysreg_el1(v, spsr); + write_sysreg_el1(v, SYS_SPSR); else vcpu_gp_regs(vcpu)->spsr[KVM_SPSR_EL1] = v; } @@ -353,6 +353,20 @@ static inline unsigned long kvm_vcpu_get_mpidr_aff(struct kvm_vcpu *vcpu) return vcpu_read_sys_reg(vcpu, MPIDR_EL1) & MPIDR_HWID_BITMASK; } +static inline bool kvm_arm_get_vcpu_workaround_2_flag(struct kvm_vcpu *vcpu) +{ + return vcpu->arch.workaround_flags & VCPU_WORKAROUND_2_FLAG; +} + +static inline void kvm_arm_set_vcpu_workaround_2_flag(struct kvm_vcpu *vcpu, + bool flag) +{ + if (flag) + vcpu->arch.workaround_flags |= VCPU_WORKAROUND_2_FLAG; + else + vcpu->arch.workaround_flags &= ~VCPU_WORKAROUND_2_FLAG; +} + static inline void kvm_vcpu_set_be(struct kvm_vcpu *vcpu) { if (vcpu_mode_is_32bit(vcpu)) { @@ -451,13 +465,13 @@ static inline void kvm_skip_instr(struct kvm_vcpu *vcpu, bool is_wide_instr) */ static inline void __hyp_text __kvm_skip_instr(struct kvm_vcpu *vcpu) { - *vcpu_pc(vcpu) = read_sysreg_el2(elr); - vcpu->arch.ctxt.gp_regs.regs.pstate = read_sysreg_el2(spsr); + *vcpu_pc(vcpu) = read_sysreg_el2(SYS_ELR); + vcpu->arch.ctxt.gp_regs.regs.pstate = read_sysreg_el2(SYS_SPSR); kvm_skip_instr(vcpu, kvm_vcpu_trap_il_is32bit(vcpu)); - write_sysreg_el2(vcpu->arch.ctxt.gp_regs.regs.pstate, spsr); - write_sysreg_el2(*vcpu_pc(vcpu), elr); + write_sysreg_el2(vcpu->arch.ctxt.gp_regs.regs.pstate, SYS_SPSR); + write_sysreg_el2(*vcpu_pc(vcpu), SYS_ELR); } #endif /* __ARM64_KVM_EMULATE_H__ */ diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h index c328191aa202..f656169db8c3 100644 --- a/arch/arm64/include/asm/kvm_host.h +++ b/arch/arm64/include/asm/kvm_host.h @@ -19,12 +19,12 @@ #include <asm/arch_gicv3.h> #include <asm/barrier.h> #include <asm/cpufeature.h> +#include <asm/cputype.h> #include <asm/daifflags.h> #include <asm/fpsimd.h> #include <asm/kvm.h> #include <asm/kvm_asm.h> #include <asm/kvm_mmio.h> -#include <asm/smp_plat.h> #include <asm/thread_info.h> #define __KVM_HAVE_ARCH_INTC_INITIALIZED @@ -484,11 +484,10 @@ struct kvm_vcpu *kvm_mpidr_to_vcpu(struct kvm *kvm, unsigned long mpidr); DECLARE_PER_CPU(kvm_host_data_t, kvm_host_data); -static inline void kvm_init_host_cpu_context(struct kvm_cpu_context *cpu_ctxt, - int cpu) +static inline void kvm_init_host_cpu_context(struct kvm_cpu_context *cpu_ctxt) { /* The host's MPIDR is immutable, so let's set it up at boot time */ - cpu_ctxt->sys_regs[MPIDR_EL1] = cpu_logical_map(cpu); + cpu_ctxt->sys_regs[MPIDR_EL1] = read_cpuid_mpidr(); } void __kvm_enable_ssbs(void); @@ -597,11 +596,12 @@ static inline void kvm_arm_vhe_guest_enter(void) * will not signal the CPU of interrupts of lower priority, and the * only way to get out will be via guest exceptions. * Naturally, we want to avoid this. + * + * local_daif_mask() already sets GIC_PRIO_PSR_I_SET, we just need a + * dsb to ensure the redistributor is forwards EL2 IRQs to the CPU. */ - if (system_uses_irq_prio_masking()) { - gic_write_pmr(GIC_PRIO_IRQON); + if (system_uses_irq_prio_masking()) dsb(sy); - } } static inline void kvm_arm_vhe_guest_exit(void) @@ -620,9 +620,21 @@ static inline void kvm_arm_vhe_guest_exit(void) isb(); } -static inline bool kvm_arm_harden_branch_predictor(void) +#define KVM_BP_HARDEN_UNKNOWN -1 +#define KVM_BP_HARDEN_WA_NEEDED 0 +#define KVM_BP_HARDEN_NOT_REQUIRED 1 + +static inline int kvm_arm_harden_branch_predictor(void) { - return cpus_have_const_cap(ARM64_HARDEN_BRANCH_PREDICTOR); + switch (get_spectre_v2_workaround_state()) { + case ARM64_BP_HARDEN_WA_NEEDED: + return KVM_BP_HARDEN_WA_NEEDED; + case ARM64_BP_HARDEN_NOT_REQUIRED: + return KVM_BP_HARDEN_NOT_REQUIRED; + case ARM64_BP_HARDEN_UNKNOWN: + default: + return KVM_BP_HARDEN_UNKNOWN; + } } #define KVM_SSBD_UNKNOWN -1 diff --git a/arch/arm64/include/asm/kvm_hyp.h b/arch/arm64/include/asm/kvm_hyp.h index 286f7e7e1be4..86825aa20852 100644 --- a/arch/arm64/include/asm/kvm_hyp.h +++ b/arch/arm64/include/asm/kvm_hyp.h @@ -18,7 +18,7 @@ #define read_sysreg_elx(r,nvh,vh) \ ({ \ u64 reg; \ - asm volatile(ALTERNATIVE("mrs %0, " __stringify(r##nvh),\ + asm volatile(ALTERNATIVE(__mrs_s("%0", r##nvh), \ __mrs_s("%0", r##vh), \ ARM64_HAS_VIRT_HOST_EXTN) \ : "=r" (reg)); \ @@ -28,7 +28,7 @@ #define write_sysreg_elx(v,r,nvh,vh) \ do { \ u64 __val = (u64)(v); \ - asm volatile(ALTERNATIVE("msr " __stringify(r##nvh) ", %x0",\ + asm volatile(ALTERNATIVE(__msr_s(r##nvh, "%x0"), \ __msr_s(r##vh, "%x0"), \ ARM64_HAS_VIRT_HOST_EXTN) \ : : "rZ" (__val)); \ @@ -37,55 +37,15 @@ /* * Unified accessors for registers that have a different encoding * between VHE and non-VHE. They must be specified without their "ELx" - * encoding. + * encoding, but with the SYS_ prefix, as defined in asm/sysreg.h. */ -#define read_sysreg_el2(r) \ - ({ \ - u64 reg; \ - asm volatile(ALTERNATIVE("mrs %0, " __stringify(r##_EL2),\ - "mrs %0, " __stringify(r##_EL1),\ - ARM64_HAS_VIRT_HOST_EXTN) \ - : "=r" (reg)); \ - reg; \ - }) - -#define write_sysreg_el2(v,r) \ - do { \ - u64 __val = (u64)(v); \ - asm volatile(ALTERNATIVE("msr " __stringify(r##_EL2) ", %x0",\ - "msr " __stringify(r##_EL1) ", %x0",\ - ARM64_HAS_VIRT_HOST_EXTN) \ - : : "rZ" (__val)); \ - } while (0) #define read_sysreg_el0(r) read_sysreg_elx(r, _EL0, _EL02) #define write_sysreg_el0(v,r) write_sysreg_elx(v, r, _EL0, _EL02) #define read_sysreg_el1(r) read_sysreg_elx(r, _EL1, _EL12) #define write_sysreg_el1(v,r) write_sysreg_elx(v, r, _EL1, _EL12) - -/* The VHE specific system registers and their encoding */ -#define sctlr_EL12 sys_reg(3, 5, 1, 0, 0) -#define cpacr_EL12 sys_reg(3, 5, 1, 0, 2) -#define ttbr0_EL12 sys_reg(3, 5, 2, 0, 0) -#define ttbr1_EL12 sys_reg(3, 5, 2, 0, 1) -#define tcr_EL12 sys_reg(3, 5, 2, 0, 2) -#define afsr0_EL12 sys_reg(3, 5, 5, 1, 0) -#define afsr1_EL12 sys_reg(3, 5, 5, 1, 1) -#define esr_EL12 sys_reg(3, 5, 5, 2, 0) -#define far_EL12 sys_reg(3, 5, 6, 0, 0) -#define mair_EL12 sys_reg(3, 5, 10, 2, 0) -#define amair_EL12 sys_reg(3, 5, 10, 3, 0) -#define vbar_EL12 sys_reg(3, 5, 12, 0, 0) -#define contextidr_EL12 sys_reg(3, 5, 13, 0, 1) -#define cntkctl_EL12 sys_reg(3, 5, 14, 1, 0) -#define cntp_tval_EL02 sys_reg(3, 5, 14, 2, 0) -#define cntp_ctl_EL02 sys_reg(3, 5, 14, 2, 1) -#define cntp_cval_EL02 sys_reg(3, 5, 14, 2, 2) -#define cntv_tval_EL02 sys_reg(3, 5, 14, 3, 0) -#define cntv_ctl_EL02 sys_reg(3, 5, 14, 3, 1) -#define cntv_cval_EL02 sys_reg(3, 5, 14, 3, 2) -#define spsr_EL12 sys_reg(3, 5, 4, 0, 0) -#define elr_EL12 sys_reg(3, 5, 4, 0, 1) +#define read_sysreg_el2(r) read_sysreg_elx(r, _EL2, _EL1) +#define write_sysreg_el2(v,r) write_sysreg_elx(v, r, _EL2, _EL1) /** * hyp_alternate_select - Generates patchable code sequences that are diff --git a/arch/arm64/include/asm/lse.h b/arch/arm64/include/asm/lse.h index 8262325e2fc6..80b388278149 100644 --- a/arch/arm64/include/asm/lse.h +++ b/arch/arm64/include/asm/lse.h @@ -2,56 +2,47 @@ #ifndef __ASM_LSE_H #define __ASM_LSE_H +#include <asm/atomic_ll_sc.h> + #if defined(CONFIG_AS_LSE) && defined(CONFIG_ARM64_LSE_ATOMICS) #include <linux/compiler_types.h> #include <linux/export.h> +#include <linux/jump_label.h> #include <linux/stringify.h> #include <asm/alternative.h> +#include <asm/atomic_lse.h> #include <asm/cpucaps.h> -#ifdef __ASSEMBLER__ - -.arch_extension lse - -.macro alt_lse, llsc, lse - alternative_insn "\llsc", "\lse", ARM64_HAS_LSE_ATOMICS -.endm - -#else /* __ASSEMBLER__ */ - __asm__(".arch_extension lse"); -/* Move the ll/sc atomics out-of-line */ -#define __LL_SC_INLINE notrace -#define __LL_SC_PREFIX(x) __ll_sc_##x -#define __LL_SC_EXPORT(x) EXPORT_SYMBOL(__LL_SC_PREFIX(x)) +extern struct static_key_false cpu_hwcap_keys[ARM64_NCAPS]; +extern struct static_key_false arm64_const_caps_ready; + +static inline bool system_uses_lse_atomics(void) +{ + return (static_branch_likely(&arm64_const_caps_ready)) && + static_branch_likely(&cpu_hwcap_keys[ARM64_HAS_LSE_ATOMICS]); +} -/* Macro for constructing calls to out-of-line ll/sc atomics */ -#define __LL_SC_CALL(op) "bl\t" __stringify(__LL_SC_PREFIX(op)) "\n" -#define __LL_SC_CLOBBERS "x16", "x17", "x30" +#define __lse_ll_sc_body(op, ...) \ +({ \ + system_uses_lse_atomics() ? \ + __lse_##op(__VA_ARGS__) : \ + __ll_sc_##op(__VA_ARGS__); \ +}) /* In-line patching at runtime */ #define ARM64_LSE_ATOMIC_INSN(llsc, lse) \ ALTERNATIVE(llsc, lse, ARM64_HAS_LSE_ATOMICS) -#endif /* __ASSEMBLER__ */ #else /* CONFIG_AS_LSE && CONFIG_ARM64_LSE_ATOMICS */ -#ifdef __ASSEMBLER__ - -.macro alt_lse, llsc, lse - \llsc -.endm - -#else /* __ASSEMBLER__ */ +static inline bool system_uses_lse_atomics(void) { return false; } -#define __LL_SC_INLINE static inline -#define __LL_SC_PREFIX(x) x -#define __LL_SC_EXPORT(x) +#define __lse_ll_sc_body(op, ...) __ll_sc_##op(__VA_ARGS__) #define ARM64_LSE_ATOMIC_INSN(llsc, lse) llsc -#endif /* __ASSEMBLER__ */ #endif /* CONFIG_AS_LSE && CONFIG_ARM64_LSE_ATOMICS */ #endif /* __ASM_LSE_H */ diff --git a/arch/arm64/include/asm/memory.h b/arch/arm64/include/asm/memory.h index b7ba75809751..b61b50bf68b1 100644 --- a/arch/arm64/include/asm/memory.h +++ b/arch/arm64/include/asm/memory.h @@ -12,10 +12,10 @@ #include <linux/compiler.h> #include <linux/const.h> +#include <linux/sizes.h> #include <linux/types.h> #include <asm/bug.h> #include <asm/page-def.h> -#include <linux/sizes.h> /* * Size of the PCI I/O space. This must remain a power of two so that @@ -26,37 +26,50 @@ /* * VMEMMAP_SIZE - allows the whole linear region to be covered by * a struct page array + * + * If we are configured with a 52-bit kernel VA then our VMEMMAP_SIZE + * needs to cover the memory region from the beginning of the 52-bit + * PAGE_OFFSET all the way to PAGE_END for 48-bit. This allows us to + * keep a constant PAGE_OFFSET and "fallback" to using the higher end + * of the VMEMMAP where 52-bit support is not available in hardware. */ -#define VMEMMAP_SIZE (UL(1) << (VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT)) +#define VMEMMAP_SIZE ((_PAGE_END(VA_BITS_MIN) - PAGE_OFFSET) \ + >> (PAGE_SHIFT - STRUCT_PAGE_MAX_SHIFT)) /* - * PAGE_OFFSET - the virtual address of the start of the linear map (top - * (VA_BITS - 1)) - * KIMAGE_VADDR - the virtual address of the start of the kernel image + * PAGE_OFFSET - the virtual address of the start of the linear map, at the + * start of the TTBR1 address space. + * PAGE_END - the end of the linear map, where all other kernel mappings begin. + * KIMAGE_VADDR - the virtual address of the start of the kernel image. * VA_BITS - the maximum number of bits for virtual addresses. - * VA_START - the first kernel virtual address. */ #define VA_BITS (CONFIG_ARM64_VA_BITS) -#define VA_START (UL(0xffffffffffffffff) - \ - (UL(1) << VA_BITS) + 1) -#define PAGE_OFFSET (UL(0xffffffffffffffff) - \ - (UL(1) << (VA_BITS - 1)) + 1) +#define _PAGE_OFFSET(va) (-(UL(1) << (va))) +#define PAGE_OFFSET (_PAGE_OFFSET(VA_BITS)) #define KIMAGE_VADDR (MODULES_END) -#define BPF_JIT_REGION_START (VA_START + KASAN_SHADOW_SIZE) +#define BPF_JIT_REGION_START (KASAN_SHADOW_END) #define BPF_JIT_REGION_SIZE (SZ_128M) #define BPF_JIT_REGION_END (BPF_JIT_REGION_START + BPF_JIT_REGION_SIZE) #define MODULES_END (MODULES_VADDR + MODULES_VSIZE) #define MODULES_VADDR (BPF_JIT_REGION_END) #define MODULES_VSIZE (SZ_128M) -#define VMEMMAP_START (PAGE_OFFSET - VMEMMAP_SIZE) +#define VMEMMAP_START (-VMEMMAP_SIZE - SZ_2M) #define PCI_IO_END (VMEMMAP_START - SZ_2M) #define PCI_IO_START (PCI_IO_END - PCI_IO_SIZE) #define FIXADDR_TOP (PCI_IO_START - SZ_2M) -#define KERNEL_START _text -#define KERNEL_END _end +#if VA_BITS > 48 +#define VA_BITS_MIN (48) +#else +#define VA_BITS_MIN (VA_BITS) +#endif + +#define _PAGE_END(va) (-(UL(1) << ((va) - 1))) + +#define KERNEL_START _text +#define KERNEL_END _end -#ifdef CONFIG_ARM64_USER_VA_BITS_52 +#ifdef CONFIG_ARM64_VA_BITS_52 #define MAX_USER_VA_BITS 52 #else #define MAX_USER_VA_BITS VA_BITS @@ -68,12 +81,14 @@ * significantly, so double the (minimum) stack size when they are in use. */ #ifdef CONFIG_KASAN -#define KASAN_SHADOW_SIZE (UL(1) << (VA_BITS - KASAN_SHADOW_SCALE_SHIFT)) +#define KASAN_SHADOW_OFFSET _AC(CONFIG_KASAN_SHADOW_OFFSET, UL) +#define KASAN_SHADOW_END ((UL(1) << (64 - KASAN_SHADOW_SCALE_SHIFT)) \ + + KASAN_SHADOW_OFFSET) #define KASAN_THREAD_SHIFT 1 #else -#define KASAN_SHADOW_SIZE (0) #define KASAN_THREAD_SHIFT 0 -#endif +#define KASAN_SHADOW_END (_PAGE_END(VA_BITS_MIN)) +#endif /* CONFIG_KASAN */ #define MIN_THREAD_SHIFT (14 + KASAN_THREAD_SHIFT) @@ -117,14 +132,14 @@ * 16 KB granule: 128 level 3 entries, with contiguous bit * 64 KB granule: 32 level 3 entries, with contiguous bit */ -#define SEGMENT_ALIGN SZ_2M +#define SEGMENT_ALIGN SZ_2M #else /* * 4 KB granule: 16 level 3 entries, with contiguous bit * 16 KB granule: 4 level 3 entries, without contiguous bit * 64 KB granule: 1 level 3 entry */ -#define SEGMENT_ALIGN SZ_64K +#define SEGMENT_ALIGN SZ_64K #endif /* @@ -157,10 +172,13 @@ #endif #ifndef __ASSEMBLY__ +extern u64 vabits_actual; +#define PAGE_END (_PAGE_END(vabits_actual)) #include <linux/bitops.h> #include <linux/mmdebug.h> +extern s64 physvirt_offset; extern s64 memstart_addr; /* PHYS_OFFSET - the physical address of the start of memory. */ #define PHYS_OFFSET ({ VM_BUG_ON(memstart_addr & 1); memstart_addr; }) @@ -176,9 +194,6 @@ static inline unsigned long kaslr_offset(void) return kimage_vaddr - KIMAGE_VADDR; } -/* the actual size of a user virtual address */ -extern u64 vabits_user; - /* * Allow all memory at the discovery stage. We will clip it later. */ @@ -201,19 +216,23 @@ extern u64 vabits_user; * pass on to access_ok(), for instance. */ #define untagged_addr(addr) \ - ((__typeof__(addr))sign_extend64((u64)(addr), 55)) + ((__force __typeof__(addr))sign_extend64((__force u64)(addr), 55)) #ifdef CONFIG_KASAN_SW_TAGS #define __tag_shifted(tag) ((u64)(tag) << 56) -#define __tag_set(addr, tag) (__typeof__(addr))( \ - ((u64)(addr) & ~__tag_shifted(0xff)) | __tag_shifted(tag)) #define __tag_reset(addr) untagged_addr(addr) #define __tag_get(addr) (__u8)((u64)(addr) >> 56) #else -#define __tag_set(addr, tag) (addr) +#define __tag_shifted(tag) 0UL #define __tag_reset(addr) (addr) #define __tag_get(addr) 0 -#endif +#endif /* CONFIG_KASAN_SW_TAGS */ + +static inline const void *__tag_set(const void *addr, u8 tag) +{ + u64 __addr = (u64)addr & ~__tag_shifted(0xff); + return (const void *)(__addr | __tag_shifted(tag)); +} /* * Physical vs virtual RAM address space conversion. These are @@ -223,19 +242,18 @@ extern u64 vabits_user; /* - * The linear kernel range starts in the middle of the virtual adddress + * The linear kernel range starts at the bottom of the virtual address * space. Testing the top bit for the start of the region is a - * sufficient check. + * sufficient check and avoids having to worry about the tag. */ -#define __is_lm_address(addr) (!!((addr) & BIT(VA_BITS - 1))) +#define __is_lm_address(addr) (!(((u64)addr) & BIT(vabits_actual - 1))) -#define __lm_to_phys(addr) (((addr) & ~PAGE_OFFSET) + PHYS_OFFSET) +#define __lm_to_phys(addr) (((addr) + physvirt_offset)) #define __kimg_to_phys(addr) ((addr) - kimage_voffset) #define __virt_to_phys_nodebug(x) ({ \ - phys_addr_t __x = (phys_addr_t)(x); \ - __is_lm_address(__x) ? __lm_to_phys(__x) : \ - __kimg_to_phys(__x); \ + phys_addr_t __x = (phys_addr_t)(__tag_reset(x)); \ + __is_lm_address(__x) ? __lm_to_phys(__x) : __kimg_to_phys(__x); \ }) #define __pa_symbol_nodebug(x) __kimg_to_phys((phys_addr_t)(x)) @@ -246,9 +264,9 @@ extern phys_addr_t __phys_addr_symbol(unsigned long x); #else #define __virt_to_phys(x) __virt_to_phys_nodebug(x) #define __phys_addr_symbol(x) __pa_symbol_nodebug(x) -#endif +#endif /* CONFIG_DEBUG_VIRTUAL */ -#define __phys_to_virt(x) ((unsigned long)((x) - PHYS_OFFSET) | PAGE_OFFSET) +#define __phys_to_virt(x) ((unsigned long)((x) - physvirt_offset)) #define __phys_to_kimg(x) ((unsigned long)((x) + kimage_voffset)) /* @@ -282,41 +300,38 @@ static inline void *phys_to_virt(phys_addr_t x) #define __pa_nodebug(x) __virt_to_phys_nodebug((unsigned long)(x)) #define __va(x) ((void *)__phys_to_virt((phys_addr_t)(x))) #define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT) -#define virt_to_pfn(x) __phys_to_pfn(__virt_to_phys((unsigned long)(x))) -#define sym_to_pfn(x) __phys_to_pfn(__pa_symbol(x)) +#define virt_to_pfn(x) __phys_to_pfn(__virt_to_phys((unsigned long)(x))) +#define sym_to_pfn(x) __phys_to_pfn(__pa_symbol(x)) /* - * virt_to_page(k) convert a _valid_ virtual address to struct page * - * virt_addr_valid(k) indicates whether a virtual address is valid + * virt_to_page(x) convert a _valid_ virtual address to struct page * + * virt_addr_valid(x) indicates whether a virtual address is valid */ #define ARCH_PFN_OFFSET ((unsigned long)PHYS_PFN_OFFSET) #if !defined(CONFIG_SPARSEMEM_VMEMMAP) || defined(CONFIG_DEBUG_VIRTUAL) -#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) -#define _virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT) +#define virt_to_page(x) pfn_to_page(virt_to_pfn(x)) #else -#define __virt_to_pgoff(kaddr) (((u64)(kaddr) & ~PAGE_OFFSET) / PAGE_SIZE * sizeof(struct page)) -#define __page_to_voff(kaddr) (((u64)(kaddr) & ~VMEMMAP_START) * PAGE_SIZE / sizeof(struct page)) - -#define page_to_virt(page) ({ \ - unsigned long __addr = \ - ((__page_to_voff(page)) | PAGE_OFFSET); \ - unsigned long __addr_tag = \ - __tag_set(__addr, page_kasan_tag(page)); \ - ((void *)__addr_tag); \ +#define page_to_virt(x) ({ \ + __typeof__(x) __page = x; \ + u64 __idx = ((u64)__page - VMEMMAP_START) / sizeof(struct page);\ + u64 __addr = PAGE_OFFSET + (__idx * PAGE_SIZE); \ + (void *)__tag_set((const void *)__addr, page_kasan_tag(__page));\ }) -#define virt_to_page(vaddr) ((struct page *)((__virt_to_pgoff(vaddr)) | VMEMMAP_START)) +#define virt_to_page(x) ({ \ + u64 __idx = (__tag_reset((u64)x) - PAGE_OFFSET) / PAGE_SIZE; \ + u64 __addr = VMEMMAP_START + (__idx * sizeof(struct page)); \ + (struct page *)__addr; \ +}) +#endif /* !CONFIG_SPARSEMEM_VMEMMAP || CONFIG_DEBUG_VIRTUAL */ -#define _virt_addr_valid(kaddr) pfn_valid((((u64)(kaddr) & ~PAGE_OFFSET) \ - + PHYS_OFFSET) >> PAGE_SHIFT) -#endif -#endif +#define virt_addr_valid(addr) ({ \ + __typeof__(addr) __addr = addr; \ + __is_lm_address(__addr) && pfn_valid(virt_to_pfn(__addr)); \ +}) -#define _virt_addr_is_linear(kaddr) \ - (__tag_reset((u64)(kaddr)) >= PAGE_OFFSET) -#define virt_addr_valid(kaddr) \ - (_virt_addr_is_linear(kaddr) && _virt_addr_valid(kaddr)) +#endif /* !ASSEMBLY */ /* * Given that the GIC architecture permits ITS implementations that can only be @@ -331,4 +346,4 @@ static inline void *phys_to_virt(phys_addr_t x) #include <asm-generic/memory_model.h> -#endif +#endif /* __ASM_MEMORY_H */ diff --git a/arch/arm64/include/asm/mmu.h b/arch/arm64/include/asm/mmu.h index fd6161336653..f217e3292919 100644 --- a/arch/arm64/include/asm/mmu.h +++ b/arch/arm64/include/asm/mmu.h @@ -126,7 +126,7 @@ extern void init_mem_pgprot(void); extern void create_pgd_mapping(struct mm_struct *mm, phys_addr_t phys, unsigned long virt, phys_addr_t size, pgprot_t prot, bool page_mappings_only); -extern void *fixmap_remap_fdt(phys_addr_t dt_phys); +extern void *fixmap_remap_fdt(phys_addr_t dt_phys, int *size, pgprot_t prot); extern void mark_linear_text_alias_ro(void); #define INIT_MM_CONTEXT(name) \ diff --git a/arch/arm64/include/asm/mmu_context.h b/arch/arm64/include/asm/mmu_context.h index 7ed0adb187a8..3827ff4040a3 100644 --- a/arch/arm64/include/asm/mmu_context.h +++ b/arch/arm64/include/asm/mmu_context.h @@ -63,7 +63,7 @@ extern u64 idmap_ptrs_per_pgd; static inline bool __cpu_uses_extended_idmap(void) { - if (IS_ENABLED(CONFIG_ARM64_USER_VA_BITS_52)) + if (IS_ENABLED(CONFIG_ARM64_VA_BITS_52)) return false; return unlikely(idmap_t0sz != TCR_T0SZ(VA_BITS)); @@ -95,7 +95,7 @@ static inline void __cpu_set_tcr_t0sz(unsigned long t0sz) isb(); } -#define cpu_set_default_tcr_t0sz() __cpu_set_tcr_t0sz(TCR_T0SZ(VA_BITS)) +#define cpu_set_default_tcr_t0sz() __cpu_set_tcr_t0sz(TCR_T0SZ(vabits_actual)) #define cpu_set_idmap_tcr_t0sz() __cpu_set_tcr_t0sz(idmap_t0sz) /* diff --git a/arch/arm64/include/asm/pci.h b/arch/arm64/include/asm/pci.h index 9e690686e8aa..70b323cf8300 100644 --- a/arch/arm64/include/asm/pci.h +++ b/arch/arm64/include/asm/pci.h @@ -1,7 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0 */ #ifndef __ASM_PCI_H #define __ASM_PCI_H -#ifdef __KERNEL__ #include <linux/types.h> #include <linux/slab.h> @@ -35,5 +34,4 @@ static inline int pci_proc_domain(struct pci_bus *bus) } #endif /* CONFIG_PCI */ -#endif /* __KERNEL__ */ #endif /* __ASM_PCI_H */ diff --git a/arch/arm64/include/asm/pgalloc.h b/arch/arm64/include/asm/pgalloc.h index cdced518378d..172d76fa0245 100644 --- a/arch/arm64/include/asm/pgalloc.h +++ b/arch/arm64/include/asm/pgalloc.h @@ -13,18 +13,21 @@ #include <asm/cacheflush.h> #include <asm/tlbflush.h> -#define check_pgt_cache() do { } while (0) +#include <asm-generic/pgalloc.h> /* for pte_{alloc,free}_one */ -#define PGALLOC_GFP (GFP_KERNEL | __GFP_ZERO) #define PGD_SIZE (PTRS_PER_PGD * sizeof(pgd_t)) #if CONFIG_PGTABLE_LEVELS > 2 static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long addr) { + gfp_t gfp = GFP_PGTABLE_USER; struct page *page; - page = alloc_page(PGALLOC_GFP); + if (mm == &init_mm) + gfp = GFP_PGTABLE_KERNEL; + + page = alloc_page(gfp); if (!page) return NULL; if (!pgtable_pmd_page_ctor(page)) { @@ -61,7 +64,7 @@ static inline void __pud_populate(pud_t *pudp, phys_addr_t pmdp, pudval_t prot) static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long addr) { - return (pud_t *)__get_free_page(PGALLOC_GFP); + return (pud_t *)__get_free_page(GFP_PGTABLE_USER); } static inline void pud_free(struct mm_struct *mm, pud_t *pudp) @@ -89,42 +92,6 @@ static inline void __pgd_populate(pgd_t *pgdp, phys_addr_t pudp, pgdval_t prot) extern pgd_t *pgd_alloc(struct mm_struct *mm); extern void pgd_free(struct mm_struct *mm, pgd_t *pgdp); -static inline pte_t * -pte_alloc_one_kernel(struct mm_struct *mm) -{ - return (pte_t *)__get_free_page(PGALLOC_GFP); -} - -static inline pgtable_t -pte_alloc_one(struct mm_struct *mm) -{ - struct page *pte; - - pte = alloc_pages(PGALLOC_GFP, 0); - if (!pte) - return NULL; - if (!pgtable_page_ctor(pte)) { - __free_page(pte); - return NULL; - } - return pte; -} - -/* - * Free a PTE table. - */ -static inline void pte_free_kernel(struct mm_struct *mm, pte_t *ptep) -{ - if (ptep) - free_page((unsigned long)ptep); -} - -static inline void pte_free(struct mm_struct *mm, pgtable_t pte) -{ - pgtable_page_dtor(pte); - __free_page(pte); -} - static inline void __pmd_populate(pmd_t *pmdp, phys_addr_t ptep, pmdval_t prot) { diff --git a/arch/arm64/include/asm/pgtable-hwdef.h b/arch/arm64/include/asm/pgtable-hwdef.h index 30e5e67749e5..3df60f97da1f 100644 --- a/arch/arm64/include/asm/pgtable-hwdef.h +++ b/arch/arm64/include/asm/pgtable-hwdef.h @@ -115,7 +115,6 @@ * Level 2 descriptor (PMD). */ #define PMD_TYPE_MASK (_AT(pmdval_t, 3) << 0) -#define PMD_TYPE_FAULT (_AT(pmdval_t, 0) << 0) #define PMD_TYPE_TABLE (_AT(pmdval_t, 3) << 0) #define PMD_TYPE_SECT (_AT(pmdval_t, 1) << 0) #define PMD_TABLE_BIT (_AT(pmdval_t, 1) << 1) @@ -142,8 +141,8 @@ /* * Level 3 descriptor (PTE). */ +#define PTE_VALID (_AT(pteval_t, 1) << 0) #define PTE_TYPE_MASK (_AT(pteval_t, 3) << 0) -#define PTE_TYPE_FAULT (_AT(pteval_t, 0) << 0) #define PTE_TYPE_PAGE (_AT(pteval_t, 3) << 0) #define PTE_TABLE_BIT (_AT(pteval_t, 1) << 1) #define PTE_USER (_AT(pteval_t, 1) << 6) /* AP[1] */ @@ -305,7 +304,7 @@ #define TTBR_BADDR_MASK_52 (((UL(1) << 46) - 1) << 2) #endif -#ifdef CONFIG_ARM64_USER_VA_BITS_52 +#ifdef CONFIG_ARM64_VA_BITS_52 /* Must be at least 64-byte aligned to prevent corruption of the TTBR */ #define TTBR1_BADDR_4852_OFFSET (((UL(1) << (52 - PGDIR_SHIFT)) - \ (UL(1) << (48 - PGDIR_SHIFT))) * 8) diff --git a/arch/arm64/include/asm/pgtable-prot.h b/arch/arm64/include/asm/pgtable-prot.h index c81583be034b..9a21b84536f2 100644 --- a/arch/arm64/include/asm/pgtable-prot.h +++ b/arch/arm64/include/asm/pgtable-prot.h @@ -13,10 +13,10 @@ /* * Software defined PTE bits definition. */ -#define PTE_VALID (_AT(pteval_t, 1) << 0) #define PTE_WRITE (PTE_DBM) /* same as DBM (51) */ #define PTE_DIRTY (_AT(pteval_t, 1) << 55) #define PTE_SPECIAL (_AT(pteval_t, 1) << 56) +#define PTE_DEVMAP (_AT(pteval_t, 1) << 57) #define PTE_PROT_NONE (_AT(pteval_t, 1) << 58) /* only when !PTE_VALID */ #ifndef __ASSEMBLY__ @@ -77,7 +77,7 @@ }) #define PAGE_S2 __pgprot(_PROT_DEFAULT | PAGE_S2_MEMATTR(NORMAL) | PTE_S2_RDONLY | PAGE_S2_XN) -#define PAGE_S2_DEVICE __pgprot(_PROT_DEFAULT | PAGE_S2_MEMATTR(DEVICE_nGnRE) | PTE_S2_RDONLY | PAGE_S2_XN) +#define PAGE_S2_DEVICE __pgprot(_PROT_DEFAULT | PAGE_S2_MEMATTR(DEVICE_nGnRE) | PTE_S2_RDONLY | PTE_S2_XN) #define PAGE_NONE __pgprot(((_PAGE_DEFAULT) & ~PTE_VALID) | PTE_PROT_NONE | PTE_RDONLY | PTE_NG | PTE_PXN | PTE_UXN) #define PAGE_SHARED __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_UXN | PTE_WRITE) diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h index fca26759081a..7576df00eb50 100644 --- a/arch/arm64/include/asm/pgtable.h +++ b/arch/arm64/include/asm/pgtable.h @@ -21,9 +21,7 @@ * and fixed mappings */ #define VMALLOC_START (MODULES_END) -#define VMALLOC_END (PAGE_OFFSET - PUD_SIZE - VMEMMAP_SIZE - SZ_64K) - -#define vmemmap ((struct page *)VMEMMAP_START - (memstart_addr >> PAGE_SHIFT)) +#define VMALLOC_END (- PUD_SIZE - VMEMMAP_SIZE - SZ_64K) #define FIRST_USER_ADDRESS 0UL @@ -35,6 +33,8 @@ #include <linux/mm_types.h> #include <linux/sched.h> +extern struct page *vmemmap; + extern void __pte_error(const char *file, int line, unsigned long val); extern void __pmd_error(const char *file, int line, unsigned long val); extern void __pud_error(const char *file, int line, unsigned long val); @@ -79,6 +79,7 @@ extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)]; #define pte_write(pte) (!!(pte_val(pte) & PTE_WRITE)) #define pte_user_exec(pte) (!(pte_val(pte) & PTE_UXN)) #define pte_cont(pte) (!!(pte_val(pte) & PTE_CONT)) +#define pte_devmap(pte) (!!(pte_val(pte) & PTE_DEVMAP)) #define pte_cont_addr_end(addr, end) \ ({ unsigned long __boundary = ((addr) + CONT_PTE_SIZE) & CONT_PTE_MASK; \ @@ -206,6 +207,11 @@ static inline pmd_t pmd_mkcont(pmd_t pmd) return __pmd(pmd_val(pmd) | PMD_SECT_CONT); } +static inline pte_t pte_mkdevmap(pte_t pte) +{ + return set_pte_bit(pte, __pgprot(PTE_DEVMAP | PTE_SPECIAL)); +} + static inline void set_pte(pte_t *ptep, pte_t pte) { WRITE_ONCE(*ptep, pte); @@ -214,8 +220,10 @@ static inline void set_pte(pte_t *ptep, pte_t pte) * Only if the new pte is valid and kernel, otherwise TLB maintenance * or update_mmu_cache() have the necessary barriers. */ - if (pte_valid_not_user(pte)) + if (pte_valid_not_user(pte)) { dsb(ishst); + isb(); + } } extern void __sync_icache_dcache(pte_t pteval); @@ -235,29 +243,42 @@ extern void __sync_icache_dcache(pte_t pteval); * * PTE_DIRTY || (PTE_WRITE && !PTE_RDONLY) */ -static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, - pte_t *ptep, pte_t pte) + +static inline void __check_racy_pte_update(struct mm_struct *mm, pte_t *ptep, + pte_t pte) { pte_t old_pte; - if (pte_present(pte) && pte_user_exec(pte) && !pte_special(pte)) - __sync_icache_dcache(pte); + if (!IS_ENABLED(CONFIG_DEBUG_VM)) + return; + + old_pte = READ_ONCE(*ptep); + + if (!pte_valid(old_pte) || !pte_valid(pte)) + return; + if (mm != current->active_mm && atomic_read(&mm->mm_users) <= 1) + return; /* - * If the existing pte is valid, check for potential race with - * hardware updates of the pte (ptep_set_access_flags safely changes - * valid ptes without going through an invalid entry). + * Check for potential race with hardware updates of the pte + * (ptep_set_access_flags safely changes valid ptes without going + * through an invalid entry). */ - old_pte = READ_ONCE(*ptep); - if (IS_ENABLED(CONFIG_DEBUG_VM) && pte_valid(old_pte) && pte_valid(pte) && - (mm == current->active_mm || atomic_read(&mm->mm_users) > 1)) { - VM_WARN_ONCE(!pte_young(pte), - "%s: racy access flag clearing: 0x%016llx -> 0x%016llx", - __func__, pte_val(old_pte), pte_val(pte)); - VM_WARN_ONCE(pte_write(old_pte) && !pte_dirty(pte), - "%s: racy dirty state clearing: 0x%016llx -> 0x%016llx", - __func__, pte_val(old_pte), pte_val(pte)); - } + VM_WARN_ONCE(!pte_young(pte), + "%s: racy access flag clearing: 0x%016llx -> 0x%016llx", + __func__, pte_val(old_pte), pte_val(pte)); + VM_WARN_ONCE(pte_write(old_pte) && !pte_dirty(pte), + "%s: racy dirty state clearing: 0x%016llx -> 0x%016llx", + __func__, pte_val(old_pte), pte_val(pte)); +} + +static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, + pte_t *ptep, pte_t pte) +{ + if (pte_present(pte) && pte_user_exec(pte) && !pte_special(pte)) + __sync_icache_dcache(pte); + + __check_racy_pte_update(mm, ptep, pte); set_pte(ptep, pte); } @@ -282,7 +303,6 @@ static inline int pte_same(pte_t pte_a, pte_t pte_b) /* * Huge pte definitions. */ -#define pte_huge(pte) (!(pte_val(pte) & PTE_TABLE_BIT)) #define pte_mkhuge(pte) (__pte(pte_val(pte) & ~PTE_TABLE_BIT)) /* @@ -324,9 +344,14 @@ static inline pmd_t pte_pmd(pte_t pte) return __pmd(pte_val(pte)); } -static inline pgprot_t mk_sect_prot(pgprot_t prot) +static inline pgprot_t mk_pud_sect_prot(pgprot_t prot) +{ + return __pgprot((pgprot_val(prot) & ~PUD_TABLE_BIT) | PUD_TYPE_SECT); +} + +static inline pgprot_t mk_pmd_sect_prot(pgprot_t prot) { - return __pgprot(pgprot_val(prot) & ~PTE_TABLE_BIT); + return __pgprot((pgprot_val(prot) & ~PMD_TABLE_BIT) | PMD_TYPE_SECT); } #ifdef CONFIG_NUMA_BALANCING @@ -370,6 +395,14 @@ static inline int pmd_protnone(pmd_t pmd) #define pmd_mkhuge(pmd) (__pmd(pmd_val(pmd) & ~PMD_TABLE_BIT)) +#ifdef CONFIG_TRANSPARENT_HUGEPAGE +#define pmd_devmap(pmd) pte_devmap(pmd_pte(pmd)) +#endif +static inline pmd_t pmd_mkdevmap(pmd_t pmd) +{ + return pte_pmd(set_pte_bit(pmd_pte(pmd), __pgprot(PTE_DEVMAP))); +} + #define __pmd_to_phys(pmd) __pte_to_phys(pmd_pte(pmd)) #define __phys_to_pmd_val(phys) __phys_to_pte_val(phys) #define pmd_pfn(pmd) ((__pmd_to_phys(pmd) & PMD_MASK) >> PAGE_SHIFT) @@ -404,6 +437,18 @@ static inline int pmd_protnone(pmd_t pmd) __pgprot_modify(prot, PTE_ATTRINDX_MASK, PTE_ATTRINDX(MT_NORMAL_NC) | PTE_PXN | PTE_UXN) #define pgprot_device(prot) \ __pgprot_modify(prot, PTE_ATTRINDX_MASK, PTE_ATTRINDX(MT_DEVICE_nGnRE) | PTE_PXN | PTE_UXN) +/* + * DMA allocations for non-coherent devices use what the Arm architecture calls + * "Normal non-cacheable" memory, which permits speculation, unaligned accesses + * and merging of writes. This is different from "Device-nGnR[nE]" memory which + * is intended for MMIO and thus forbids speculation, preserves access size, + * requires strict alignment and can also force write responses to come from the + * endpoint. + */ +#define pgprot_dmacoherent(prot) \ + __pgprot_modify(prot, PTE_ATTRINDX_MASK, \ + PTE_ATTRINDX(MT_NORMAL_NC) | PTE_PXN | PTE_UXN) + #define __HAVE_PHYS_MEM_ACCESS_PROT struct file; extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn, @@ -419,8 +464,8 @@ extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn, PMD_TYPE_SECT) #if defined(CONFIG_ARM64_64K_PAGES) || CONFIG_PGTABLE_LEVELS < 3 -#define pud_sect(pud) (0) -#define pud_table(pud) (1) +static inline bool pud_sect(pud_t pud) { return false; } +static inline bool pud_table(pud_t pud) { return true; } #else #define pud_sect(pud) ((pud_val(pud) & PUD_TYPE_MASK) == \ PUD_TYPE_SECT) @@ -453,8 +498,10 @@ static inline void set_pmd(pmd_t *pmdp, pmd_t pmd) WRITE_ONCE(*pmdp, pmd); - if (pmd_valid(pmd)) + if (pmd_valid(pmd)) { dsb(ishst); + isb(); + } } static inline void pmd_clear(pmd_t *pmdp) @@ -512,8 +559,10 @@ static inline void set_pud(pud_t *pudp, pud_t pud) WRITE_ONCE(*pudp, pud); - if (pud_valid(pud)) + if (pud_valid(pud)) { dsb(ishst); + isb(); + } } static inline void pud_clear(pud_t *pudp) @@ -571,6 +620,7 @@ static inline void set_pgd(pgd_t *pgdp, pgd_t pgd) WRITE_ONCE(*pgdp, pgd); dsb(ishst); + isb(); } static inline void pgd_clear(pgd_t *pgdp) @@ -655,6 +705,16 @@ static inline int pmdp_set_access_flags(struct vm_area_struct *vma, { return ptep_set_access_flags(vma, address, (pte_t *)pmdp, pmd_pte(entry), dirty); } + +static inline int pud_devmap(pud_t pud) +{ + return 0; +} + +static inline int pgd_devmap(pgd_t pgd) +{ + return 0; +} #endif /* @@ -801,8 +861,6 @@ extern int kern_addr_valid(unsigned long addr); #include <asm-generic/pgtable.h> -static inline void pgtable_cache_init(void) { } - /* * On AArch64, the cache coherency is handled via the set_pte_at() function. */ @@ -818,8 +876,8 @@ static inline void update_mmu_cache(struct vm_area_struct *vma, #define update_mmu_cache_pmd(vma, address, pmd) do { } while (0) -#define kc_vaddr_to_offset(v) ((v) & ~VA_START) -#define kc_offset_to_vaddr(o) ((o) | VA_START) +#define kc_vaddr_to_offset(v) ((v) & ~PAGE_END) +#define kc_offset_to_vaddr(o) ((o) | PAGE_END) #ifdef CONFIG_ARM64_PA_BITS_52 #define phys_to_ttbr(addr) (((addr) | ((addr) >> 46)) & TTBR_BADDR_MASK_52) diff --git a/arch/arm64/include/asm/pointer_auth.h b/arch/arm64/include/asm/pointer_auth.h index d328540cb85e..7a24bad1a58b 100644 --- a/arch/arm64/include/asm/pointer_auth.h +++ b/arch/arm64/include/asm/pointer_auth.h @@ -69,7 +69,7 @@ extern int ptrauth_prctl_reset_keys(struct task_struct *tsk, unsigned long arg); * The EL0 pointer bits used by a pointer authentication code. * This is dependent on TBI0 being enabled, or bits 63:56 would also apply. */ -#define ptrauth_user_pac_mask() GENMASK(54, vabits_user) +#define ptrauth_user_pac_mask() GENMASK(54, vabits_actual) /* Only valid for EL0 TTBR0 instruction pointers */ static inline unsigned long ptrauth_strip_insn_pac(unsigned long ptr) diff --git a/arch/arm64/include/asm/proc-fns.h b/arch/arm64/include/asm/proc-fns.h index 368d90a9d0e5..a2ce65a0c1fa 100644 --- a/arch/arm64/include/asm/proc-fns.h +++ b/arch/arm64/include/asm/proc-fns.h @@ -9,7 +9,6 @@ #ifndef __ASM_PROCFNS_H #define __ASM_PROCFNS_H -#ifdef __KERNEL__ #ifndef __ASSEMBLY__ #include <asm/page.h> @@ -25,5 +24,4 @@ extern u64 cpu_do_resume(phys_addr_t ptr, u64 idmap_ttbr); #include <asm/memory.h> #endif /* __ASSEMBLY__ */ -#endif /* __KERNEL__ */ #endif /* __ASM_PROCFNS_H */ diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h index fd5b1a4efc70..5623685c7d13 100644 --- a/arch/arm64/include/asm/processor.h +++ b/arch/arm64/include/asm/processor.h @@ -20,7 +20,6 @@ #define NET_IP_ALIGN 0 #ifndef __ASSEMBLY__ -#ifdef __KERNEL__ #include <linux/build_bug.h> #include <linux/cache.h> @@ -42,8 +41,8 @@ * TASK_UNMAPPED_BASE - the lower boundary of the mmap VM area. */ -#define DEFAULT_MAP_WINDOW_64 (UL(1) << VA_BITS) -#define TASK_SIZE_64 (UL(1) << vabits_user) +#define DEFAULT_MAP_WINDOW_64 (UL(1) << VA_BITS_MIN) +#define TASK_SIZE_64 (UL(1) << vabits_actual) #ifdef CONFIG_COMPAT #if defined(CONFIG_ARM64_64K_PAGES) && defined(CONFIG_KUSER_HELPERS) @@ -193,6 +192,16 @@ static inline void start_thread_common(struct pt_regs *regs, unsigned long pc) regs->pmr_save = GIC_PRIO_IRQON; } +static inline void set_ssbs_bit(struct pt_regs *regs) +{ + regs->pstate |= PSR_SSBS_BIT; +} + +static inline void set_compat_ssbs_bit(struct pt_regs *regs) +{ + regs->pstate |= PSR_AA32_SSBS_BIT; +} + static inline void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long sp) { @@ -200,7 +209,7 @@ static inline void start_thread(struct pt_regs *regs, unsigned long pc, regs->pstate = PSR_MODE_EL0t; if (arm64_get_ssbd_state() != ARM64_SSBD_FORCE_ENABLE) - regs->pstate |= PSR_SSBS_BIT; + set_ssbs_bit(regs); regs->sp = sp; } @@ -219,7 +228,7 @@ static inline void compat_start_thread(struct pt_regs *regs, unsigned long pc, #endif if (arm64_get_ssbd_state() != ARM64_SSBD_FORCE_ENABLE) - regs->pstate |= PSR_AA32_SSBS_BIT; + set_compat_ssbs_bit(regs); regs->compat_sp = sp; } @@ -271,10 +280,6 @@ static inline void spin_lock_prefetch(const void *ptr) "nop") : : "p" (ptr)); } -#define HAVE_ARCH_PICK_MMAP_LAYOUT - -#endif - extern unsigned long __ro_after_init signal_minsigstksz; /* sigframe size */ extern void __init minsigstksz_setup(void); @@ -296,6 +301,14 @@ extern void __init minsigstksz_setup(void); /* PR_PAC_RESET_KEYS prctl */ #define PAC_RESET_KEYS(tsk, arg) ptrauth_prctl_reset_keys(tsk, arg) +#ifdef CONFIG_ARM64_TAGGED_ADDR_ABI +/* PR_{SET,GET}_TAGGED_ADDR_CTRL prctl */ +long set_tagged_addr_ctrl(unsigned long arg); +long get_tagged_addr_ctrl(void); +#define SET_TAGGED_ADDR_CTRL(arg) set_tagged_addr_ctrl(arg) +#define GET_TAGGED_ADDR_CTRL() get_tagged_addr_ctrl() +#endif + /* * For CONFIG_GCC_PLUGIN_STACKLEAK * diff --git a/arch/arm64/include/asm/ptrace.h b/arch/arm64/include/asm/ptrace.h index dad858b6adc6..fbebb411ae20 100644 --- a/arch/arm64/include/asm/ptrace.h +++ b/arch/arm64/include/asm/ptrace.h @@ -24,9 +24,15 @@ * means masking more IRQs (or at least that the same IRQs remain masked). * * To mask interrupts, we clear the most significant bit of PMR. + * + * Some code sections either automatically switch back to PSR.I or explicitly + * require to not use priority masking. If bit GIC_PRIO_PSR_I_SET is included + * in the the priority mask, it indicates that PSR.I should be set and + * interrupt disabling temporarily does not rely on IRQ priorities. */ -#define GIC_PRIO_IRQON 0xf0 -#define GIC_PRIO_IRQOFF (GIC_PRIO_IRQON & ~0x80) +#define GIC_PRIO_IRQON 0xe0 +#define GIC_PRIO_IRQOFF (GIC_PRIO_IRQON & ~0x80) +#define GIC_PRIO_PSR_I_SET (1 << 4) /* Additional SPSR bits not exposed in the UABI */ #define PSR_IL_BIT (1 << 20) @@ -217,11 +223,12 @@ static inline void forget_syscall(struct pt_regs *regs) #define fast_interrupts_enabled(regs) \ (!((regs)->pstate & PSR_F_BIT)) -#define GET_USP(regs) \ - (!compat_user_mode(regs) ? (regs)->sp : (regs)->compat_sp) - -#define SET_USP(ptregs, value) \ - (!compat_user_mode(regs) ? ((regs)->sp = value) : ((regs)->compat_sp = value)) +static inline unsigned long user_stack_pointer(struct pt_regs *regs) +{ + if (compat_user_mode(regs)) + return regs->compat_sp; + return regs->sp; +} extern int regs_query_register_offset(const char *name); extern unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs, @@ -294,6 +301,11 @@ static inline unsigned long regs_return_value(struct pt_regs *regs) return regs->regs[0]; } +static inline void regs_set_return_value(struct pt_regs *regs, unsigned long rc) +{ + regs->regs[0] = rc; +} + /** * regs_get_kernel_argument() - get Nth function argument in kernel * @regs: pt_regs of that context @@ -320,13 +332,20 @@ static inline unsigned long regs_get_kernel_argument(struct pt_regs *regs, struct task_struct; int valid_user_regs(struct user_pt_regs *regs, struct task_struct *task); -#define GET_IP(regs) ((unsigned long)(regs)->pc) -#define SET_IP(regs, value) ((regs)->pc = ((u64) (value))) - -#define GET_FP(ptregs) ((unsigned long)(ptregs)->regs[29]) -#define SET_FP(ptregs, value) ((ptregs)->regs[29] = ((u64) (value))) +static inline unsigned long instruction_pointer(struct pt_regs *regs) +{ + return regs->pc; +} +static inline void instruction_pointer_set(struct pt_regs *regs, + unsigned long val) +{ + regs->pc = val; +} -#include <asm-generic/ptrace.h> +static inline unsigned long frame_pointer(struct pt_regs *regs) +{ + return regs->regs[29]; +} #define procedure_link_pointer(regs) ((regs)->regs[30]) @@ -336,7 +355,6 @@ static inline void procedure_link_pointer_set(struct pt_regs *regs, procedure_link_pointer(regs) = val; } -#undef profile_pc extern unsigned long profile_pc(struct pt_regs *regs); #endif /* __ASSEMBLY__ */ diff --git a/arch/arm64/include/asm/signal32.h b/arch/arm64/include/asm/signal32.h index 0418c67f2b8b..7e9f163d02ec 100644 --- a/arch/arm64/include/asm/signal32.h +++ b/arch/arm64/include/asm/signal32.h @@ -5,10 +5,55 @@ #ifndef __ASM_SIGNAL32_H #define __ASM_SIGNAL32_H -#ifdef __KERNEL__ #ifdef CONFIG_COMPAT #include <linux/compat.h> +struct compat_sigcontext { + /* We always set these two fields to 0 */ + compat_ulong_t trap_no; + compat_ulong_t error_code; + + compat_ulong_t oldmask; + compat_ulong_t arm_r0; + compat_ulong_t arm_r1; + compat_ulong_t arm_r2; + compat_ulong_t arm_r3; + compat_ulong_t arm_r4; + compat_ulong_t arm_r5; + compat_ulong_t arm_r6; + compat_ulong_t arm_r7; + compat_ulong_t arm_r8; + compat_ulong_t arm_r9; + compat_ulong_t arm_r10; + compat_ulong_t arm_fp; + compat_ulong_t arm_ip; + compat_ulong_t arm_sp; + compat_ulong_t arm_lr; + compat_ulong_t arm_pc; + compat_ulong_t arm_cpsr; + compat_ulong_t fault_address; +}; + +struct compat_ucontext { + compat_ulong_t uc_flags; + compat_uptr_t uc_link; + compat_stack_t uc_stack; + struct compat_sigcontext uc_mcontext; + compat_sigset_t uc_sigmask; + int __unused[32 - (sizeof(compat_sigset_t) / sizeof(int))]; + compat_ulong_t uc_regspace[128] __attribute__((__aligned__(8))); +}; + +struct compat_sigframe { + struct compat_ucontext uc; + compat_ulong_t retcode[2]; +}; + +struct compat_rt_sigframe { + struct compat_siginfo info; + struct compat_sigframe sig; +}; + int compat_setup_frame(int usig, struct ksignal *ksig, sigset_t *set, struct pt_regs *regs); int compat_setup_rt_frame(int usig, struct ksignal *ksig, sigset_t *set, @@ -33,5 +78,4 @@ static inline void compat_setup_restart_syscall(struct pt_regs *regs) { } #endif /* CONFIG_COMPAT */ -#endif /* __KERNEL__ */ #endif /* __ASM_SIGNAL32_H */ diff --git a/arch/arm64/include/asm/simd.h b/arch/arm64/include/asm/simd.h index 7e245b9e03a5..7434844036d3 100644 --- a/arch/arm64/include/asm/simd.h +++ b/arch/arm64/include/asm/simd.h @@ -12,9 +12,9 @@ #include <linux/preempt.h> #include <linux/types.h> -#ifdef CONFIG_KERNEL_MODE_NEON +DECLARE_PER_CPU(bool, fpsimd_context_busy); -DECLARE_PER_CPU(bool, kernel_neon_busy); +#ifdef CONFIG_KERNEL_MODE_NEON /* * may_use_simd - whether it is allowable at this time to issue SIMD @@ -26,15 +26,15 @@ DECLARE_PER_CPU(bool, kernel_neon_busy); static __must_check inline bool may_use_simd(void) { /* - * kernel_neon_busy is only set while preemption is disabled, + * fpsimd_context_busy is only set while preemption is disabled, * and is clear whenever preemption is enabled. Since - * this_cpu_read() is atomic w.r.t. preemption, kernel_neon_busy + * this_cpu_read() is atomic w.r.t. preemption, fpsimd_context_busy * cannot change under our feet -- if it's set we cannot be * migrated, and if it's clear we cannot be migrated to a CPU * where it is set. */ return !in_irq() && !irqs_disabled() && !in_nmi() && - !this_cpu_read(kernel_neon_busy); + !this_cpu_read(fpsimd_context_busy); } #else /* ! CONFIG_KERNEL_MODE_NEON */ diff --git a/arch/arm64/include/asm/stacktrace.h b/arch/arm64/include/asm/stacktrace.h index df45af931459..4d9b1f48dc39 100644 --- a/arch/arm64/include/asm/stacktrace.h +++ b/arch/arm64/include/asm/stacktrace.h @@ -8,19 +8,12 @@ #include <linux/percpu.h> #include <linux/sched.h> #include <linux/sched/task_stack.h> +#include <linux/types.h> #include <asm/memory.h> #include <asm/ptrace.h> #include <asm/sdei.h> -struct stackframe { - unsigned long fp; - unsigned long pc; -#ifdef CONFIG_FUNCTION_GRAPH_TRACER - int graph; -#endif -}; - enum stack_type { STACK_TYPE_UNKNOWN, STACK_TYPE_TASK, @@ -28,6 +21,7 @@ enum stack_type { STACK_TYPE_OVERFLOW, STACK_TYPE_SDEI_NORMAL, STACK_TYPE_SDEI_CRITICAL, + __NR_STACK_TYPES }; struct stack_info { @@ -36,6 +30,37 @@ struct stack_info { enum stack_type type; }; +/* + * A snapshot of a frame record or fp/lr register values, along with some + * accounting information necessary for robust unwinding. + * + * @fp: The fp value in the frame record (or the real fp) + * @pc: The fp value in the frame record (or the real lr) + * + * @stacks_done: Stacks which have been entirely unwound, for which it is no + * longer valid to unwind to. + * + * @prev_fp: The fp that pointed to this frame record, or a synthetic value + * of 0. This is used to ensure that within a stack, each + * subsequent frame record is at an increasing address. + * @prev_type: The type of stack this frame record was on, or a synthetic + * value of STACK_TYPE_UNKNOWN. This is used to detect a + * transition from one stack to another. + * + * @graph: When FUNCTION_GRAPH_TRACER is selected, holds the index of a + * replacement lr value in the ftrace graph stack. + */ +struct stackframe { + unsigned long fp; + unsigned long pc; + DECLARE_BITMAP(stacks_done, __NR_STACK_TYPES); + unsigned long prev_fp; + enum stack_type prev_type; +#ifdef CONFIG_FUNCTION_GRAPH_TRACER + int graph; +#endif +}; + extern int unwind_frame(struct task_struct *tsk, struct stackframe *frame); extern void walk_stackframe(struct task_struct *tsk, struct stackframe *frame, int (*fn)(struct stackframe *, void *), void *data); @@ -64,8 +89,9 @@ static inline bool on_irq_stack(unsigned long sp, return true; } -static inline bool on_task_stack(struct task_struct *tsk, unsigned long sp, - struct stack_info *info) +static inline bool on_task_stack(const struct task_struct *tsk, + unsigned long sp, + struct stack_info *info) { unsigned long low = (unsigned long)task_stack_page(tsk); unsigned long high = low + THREAD_SIZE; @@ -112,10 +138,13 @@ static inline bool on_overflow_stack(unsigned long sp, * We can only safely access per-cpu stacks from current in a non-preemptible * context. */ -static inline bool on_accessible_stack(struct task_struct *tsk, - unsigned long sp, - struct stack_info *info) +static inline bool on_accessible_stack(const struct task_struct *tsk, + unsigned long sp, + struct stack_info *info) { + if (info) + info->type = STACK_TYPE_UNKNOWN; + if (on_task_stack(tsk, sp, info)) return true; if (tsk != current || preemptible()) @@ -130,4 +159,27 @@ static inline bool on_accessible_stack(struct task_struct *tsk, return false; } +static inline void start_backtrace(struct stackframe *frame, + unsigned long fp, unsigned long pc) +{ + frame->fp = fp; + frame->pc = pc; +#ifdef CONFIG_FUNCTION_GRAPH_TRACER + frame->graph = 0; +#endif + + /* + * Prime the first unwind. + * + * In unwind_frame() we'll check that the FP points to a valid stack, + * which can't be STACK_TYPE_UNKNOWN, and the first unwind will be + * treated as a transition to whichever stack that happens to be. The + * prev_fp value won't be used, but we set it to 0 such that it is + * definitely not an accessible stack address. + */ + bitmap_zero(frame->stacks_done, __NR_STACK_TYPES); + frame->prev_fp = 0; + frame->prev_type = STACK_TYPE_UNKNOWN; +} + #endif /* __ASM_STACKTRACE_H */ diff --git a/arch/arm64/include/asm/syscall_wrapper.h b/arch/arm64/include/asm/syscall_wrapper.h index 507d0ee6bc69..06d880b3526c 100644 --- a/arch/arm64/include/asm/syscall_wrapper.h +++ b/arch/arm64/include/asm/syscall_wrapper.h @@ -8,6 +8,8 @@ #ifndef __ASM_SYSCALL_WRAPPER_H #define __ASM_SYSCALL_WRAPPER_H +struct pt_regs; + #define SC_ARM64_REGS_TO_ARGS(x, ...) \ __MAP(x,__SC_ARGS \ ,,regs->regs[0],,regs->regs[1],,regs->regs[2] \ @@ -35,8 +37,11 @@ ALLOW_ERROR_INJECTION(__arm64_compat_sys_##sname, ERRNO); \ asmlinkage long __arm64_compat_sys_##sname(const struct pt_regs *__unused) -#define COND_SYSCALL_COMPAT(name) \ - cond_syscall(__arm64_compat_sys_##name); +#define COND_SYSCALL_COMPAT(name) \ + asmlinkage long __weak __arm64_compat_sys_##name(const struct pt_regs *regs) \ + { \ + return sys_ni_syscall(); \ + } #define COMPAT_SYS_NI(name) \ SYSCALL_ALIAS(__arm64_compat_sys_##name, sys_ni_posix_timers); @@ -70,7 +75,11 @@ #endif #ifndef COND_SYSCALL -#define COND_SYSCALL(name) cond_syscall(__arm64_sys_##name) +#define COND_SYSCALL(name) \ + asmlinkage long __weak __arm64_sys_##name(const struct pt_regs *regs) \ + { \ + return sys_ni_syscall(); \ + } #endif #ifndef SYS_NI diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h index cd7f7ce1a56a..972d196c7714 100644 --- a/arch/arm64/include/asm/sysreg.h +++ b/arch/arm64/include/asm/sysreg.h @@ -9,7 +9,7 @@ #ifndef __ASM_SYSREG_H #define __ASM_SYSREG_H -#include <linux/const.h> +#include <linux/bits.h> #include <linux/stringify.h> /* @@ -191,6 +191,9 @@ #define SYS_APGAKEYLO_EL1 sys_reg(3, 0, 2, 3, 0) #define SYS_APGAKEYHI_EL1 sys_reg(3, 0, 2, 3, 1) +#define SYS_SPSR_EL1 sys_reg(3, 0, 4, 0, 0) +#define SYS_ELR_EL1 sys_reg(3, 0, 4, 0, 1) + #define SYS_ICC_PMR_EL1 sys_reg(3, 0, 4, 6, 0) #define SYS_AFSR0_EL1 sys_reg(3, 0, 5, 1, 0) @@ -209,6 +212,9 @@ #define SYS_FAR_EL1 sys_reg(3, 0, 6, 0, 0) #define SYS_PAR_EL1 sys_reg(3, 0, 7, 4, 0) +#define SYS_PAR_EL1_F BIT(1) +#define SYS_PAR_EL1_FST GENMASK(6, 1) + /*** Statistical Profiling Extension ***/ /* ID registers */ #define SYS_PMSIDR_EL1 sys_reg(3, 0, 9, 9, 7) @@ -382,6 +388,9 @@ #define SYS_CNTP_CTL_EL0 sys_reg(3, 3, 14, 2, 1) #define SYS_CNTP_CVAL_EL0 sys_reg(3, 3, 14, 2, 2) +#define SYS_CNTV_CTL_EL0 sys_reg(3, 3, 14, 3, 1) +#define SYS_CNTV_CVAL_EL0 sys_reg(3, 3, 14, 3, 2) + #define SYS_AARCH32_CNTP_TVAL sys_reg(0, 0, 14, 2, 0) #define SYS_AARCH32_CNTP_CTL sys_reg(0, 0, 14, 2, 1) #define SYS_AARCH32_CNTP_CVAL sys_reg(0, 2, 0, 14, 0) @@ -392,14 +401,17 @@ #define __TYPER_CRm(n) (0xc | (((n) >> 3) & 0x3)) #define SYS_PMEVTYPERn_EL0(n) sys_reg(3, 3, 14, __TYPER_CRm(n), __PMEV_op2(n)) -#define SYS_PMCCFILTR_EL0 sys_reg (3, 3, 14, 15, 7) +#define SYS_PMCCFILTR_EL0 sys_reg(3, 3, 14, 15, 7) #define SYS_ZCR_EL2 sys_reg(3, 4, 1, 2, 0) - #define SYS_DACR32_EL2 sys_reg(3, 4, 3, 0, 0) +#define SYS_SPSR_EL2 sys_reg(3, 4, 4, 0, 0) +#define SYS_ELR_EL2 sys_reg(3, 4, 4, 0, 1) #define SYS_IFSR32_EL2 sys_reg(3, 4, 5, 0, 1) +#define SYS_ESR_EL2 sys_reg(3, 4, 5, 2, 0) #define SYS_VSESR_EL2 sys_reg(3, 4, 5, 2, 3) #define SYS_FPEXC32_EL2 sys_reg(3, 4, 5, 3, 0) +#define SYS_FAR_EL2 sys_reg(3, 4, 6, 0, 0) #define SYS_VDISR_EL2 sys_reg(3, 4, 12, 1, 1) #define __SYS__AP0Rx_EL2(x) sys_reg(3, 4, 12, 8, x) @@ -444,80 +456,80 @@ #define SYS_ICH_LR15_EL2 __SYS__LR8_EL2(7) /* VHE encodings for architectural EL0/1 system registers */ +#define SYS_SCTLR_EL12 sys_reg(3, 5, 1, 0, 0) +#define SYS_CPACR_EL12 sys_reg(3, 5, 1, 0, 2) #define SYS_ZCR_EL12 sys_reg(3, 5, 1, 2, 0) +#define SYS_TTBR0_EL12 sys_reg(3, 5, 2, 0, 0) +#define SYS_TTBR1_EL12 sys_reg(3, 5, 2, 0, 1) +#define SYS_TCR_EL12 sys_reg(3, 5, 2, 0, 2) +#define SYS_SPSR_EL12 sys_reg(3, 5, 4, 0, 0) +#define SYS_ELR_EL12 sys_reg(3, 5, 4, 0, 1) +#define SYS_AFSR0_EL12 sys_reg(3, 5, 5, 1, 0) +#define SYS_AFSR1_EL12 sys_reg(3, 5, 5, 1, 1) +#define SYS_ESR_EL12 sys_reg(3, 5, 5, 2, 0) +#define SYS_FAR_EL12 sys_reg(3, 5, 6, 0, 0) +#define SYS_MAIR_EL12 sys_reg(3, 5, 10, 2, 0) +#define SYS_AMAIR_EL12 sys_reg(3, 5, 10, 3, 0) +#define SYS_VBAR_EL12 sys_reg(3, 5, 12, 0, 0) +#define SYS_CONTEXTIDR_EL12 sys_reg(3, 5, 13, 0, 1) +#define SYS_CNTKCTL_EL12 sys_reg(3, 5, 14, 1, 0) +#define SYS_CNTP_TVAL_EL02 sys_reg(3, 5, 14, 2, 0) +#define SYS_CNTP_CTL_EL02 sys_reg(3, 5, 14, 2, 1) +#define SYS_CNTP_CVAL_EL02 sys_reg(3, 5, 14, 2, 2) +#define SYS_CNTV_TVAL_EL02 sys_reg(3, 5, 14, 3, 0) +#define SYS_CNTV_CTL_EL02 sys_reg(3, 5, 14, 3, 1) +#define SYS_CNTV_CVAL_EL02 sys_reg(3, 5, 14, 3, 2) /* Common SCTLR_ELx flags. */ -#define SCTLR_ELx_DSSBS (_BITUL(44)) -#define SCTLR_ELx_ENIA (_BITUL(31)) -#define SCTLR_ELx_ENIB (_BITUL(30)) -#define SCTLR_ELx_ENDA (_BITUL(27)) -#define SCTLR_ELx_EE (_BITUL(25)) -#define SCTLR_ELx_IESB (_BITUL(21)) -#define SCTLR_ELx_WXN (_BITUL(19)) -#define SCTLR_ELx_ENDB (_BITUL(13)) -#define SCTLR_ELx_I (_BITUL(12)) -#define SCTLR_ELx_SA (_BITUL(3)) -#define SCTLR_ELx_C (_BITUL(2)) -#define SCTLR_ELx_A (_BITUL(1)) -#define SCTLR_ELx_M (_BITUL(0)) +#define SCTLR_ELx_DSSBS (BIT(44)) +#define SCTLR_ELx_ENIA (BIT(31)) +#define SCTLR_ELx_ENIB (BIT(30)) +#define SCTLR_ELx_ENDA (BIT(27)) +#define SCTLR_ELx_EE (BIT(25)) +#define SCTLR_ELx_IESB (BIT(21)) +#define SCTLR_ELx_WXN (BIT(19)) +#define SCTLR_ELx_ENDB (BIT(13)) +#define SCTLR_ELx_I (BIT(12)) +#define SCTLR_ELx_SA (BIT(3)) +#define SCTLR_ELx_C (BIT(2)) +#define SCTLR_ELx_A (BIT(1)) +#define SCTLR_ELx_M (BIT(0)) #define SCTLR_ELx_FLAGS (SCTLR_ELx_M | SCTLR_ELx_A | SCTLR_ELx_C | \ SCTLR_ELx_SA | SCTLR_ELx_I | SCTLR_ELx_IESB) /* SCTLR_EL2 specific flags. */ -#define SCTLR_EL2_RES1 ((_BITUL(4)) | (_BITUL(5)) | (_BITUL(11)) | (_BITUL(16)) | \ - (_BITUL(18)) | (_BITUL(22)) | (_BITUL(23)) | (_BITUL(28)) | \ - (_BITUL(29))) -#define SCTLR_EL2_RES0 ((_BITUL(6)) | (_BITUL(7)) | (_BITUL(8)) | (_BITUL(9)) | \ - (_BITUL(10)) | (_BITUL(13)) | (_BITUL(14)) | (_BITUL(15)) | \ - (_BITUL(17)) | (_BITUL(20)) | (_BITUL(24)) | (_BITUL(26)) | \ - (_BITUL(27)) | (_BITUL(30)) | (_BITUL(31)) | \ - (0xffffefffUL << 32)) +#define SCTLR_EL2_RES1 ((BIT(4)) | (BIT(5)) | (BIT(11)) | (BIT(16)) | \ + (BIT(18)) | (BIT(22)) | (BIT(23)) | (BIT(28)) | \ + (BIT(29))) #ifdef CONFIG_CPU_BIG_ENDIAN #define ENDIAN_SET_EL2 SCTLR_ELx_EE -#define ENDIAN_CLEAR_EL2 0 #else #define ENDIAN_SET_EL2 0 -#define ENDIAN_CLEAR_EL2 SCTLR_ELx_EE -#endif - -/* SCTLR_EL2 value used for the hyp-stub */ -#define SCTLR_EL2_SET (SCTLR_ELx_IESB | ENDIAN_SET_EL2 | SCTLR_EL2_RES1) -#define SCTLR_EL2_CLEAR (SCTLR_ELx_M | SCTLR_ELx_A | SCTLR_ELx_C | \ - SCTLR_ELx_SA | SCTLR_ELx_I | SCTLR_ELx_WXN | \ - SCTLR_ELx_DSSBS | ENDIAN_CLEAR_EL2 | SCTLR_EL2_RES0) - -#if (SCTLR_EL2_SET ^ SCTLR_EL2_CLEAR) != 0xffffffffffffffffUL -#error "Inconsistent SCTLR_EL2 set/clear bits" #endif /* SCTLR_EL1 specific flags. */ -#define SCTLR_EL1_UCI (_BITUL(26)) -#define SCTLR_EL1_E0E (_BITUL(24)) -#define SCTLR_EL1_SPAN (_BITUL(23)) -#define SCTLR_EL1_NTWE (_BITUL(18)) -#define SCTLR_EL1_NTWI (_BITUL(16)) -#define SCTLR_EL1_UCT (_BITUL(15)) -#define SCTLR_EL1_DZE (_BITUL(14)) -#define SCTLR_EL1_UMA (_BITUL(9)) -#define SCTLR_EL1_SED (_BITUL(8)) -#define SCTLR_EL1_ITD (_BITUL(7)) -#define SCTLR_EL1_CP15BEN (_BITUL(5)) -#define SCTLR_EL1_SA0 (_BITUL(4)) - -#define SCTLR_EL1_RES1 ((_BITUL(11)) | (_BITUL(20)) | (_BITUL(22)) | (_BITUL(28)) | \ - (_BITUL(29))) -#define SCTLR_EL1_RES0 ((_BITUL(6)) | (_BITUL(10)) | (_BITUL(13)) | (_BITUL(17)) | \ - (_BITUL(27)) | (_BITUL(30)) | (_BITUL(31)) | \ - (0xffffefffUL << 32)) +#define SCTLR_EL1_UCI (BIT(26)) +#define SCTLR_EL1_E0E (BIT(24)) +#define SCTLR_EL1_SPAN (BIT(23)) +#define SCTLR_EL1_NTWE (BIT(18)) +#define SCTLR_EL1_NTWI (BIT(16)) +#define SCTLR_EL1_UCT (BIT(15)) +#define SCTLR_EL1_DZE (BIT(14)) +#define SCTLR_EL1_UMA (BIT(9)) +#define SCTLR_EL1_SED (BIT(8)) +#define SCTLR_EL1_ITD (BIT(7)) +#define SCTLR_EL1_CP15BEN (BIT(5)) +#define SCTLR_EL1_SA0 (BIT(4)) + +#define SCTLR_EL1_RES1 ((BIT(11)) | (BIT(20)) | (BIT(22)) | (BIT(28)) | \ + (BIT(29))) #ifdef CONFIG_CPU_BIG_ENDIAN #define ENDIAN_SET_EL1 (SCTLR_EL1_E0E | SCTLR_ELx_EE) -#define ENDIAN_CLEAR_EL1 0 #else #define ENDIAN_SET_EL1 0 -#define ENDIAN_CLEAR_EL1 (SCTLR_EL1_E0E | SCTLR_ELx_EE) #endif #define SCTLR_EL1_SET (SCTLR_ELx_M | SCTLR_ELx_C | SCTLR_ELx_SA |\ @@ -525,13 +537,6 @@ SCTLR_EL1_DZE | SCTLR_EL1_UCT |\ SCTLR_EL1_NTWE | SCTLR_ELx_IESB | SCTLR_EL1_SPAN |\ ENDIAN_SET_EL1 | SCTLR_EL1_UCI | SCTLR_EL1_RES1) -#define SCTLR_EL1_CLEAR (SCTLR_ELx_A | SCTLR_EL1_CP15BEN | SCTLR_EL1_ITD |\ - SCTLR_EL1_UMA | SCTLR_ELx_WXN | ENDIAN_CLEAR_EL1 |\ - SCTLR_ELx_DSSBS | SCTLR_EL1_NTWI | SCTLR_EL1_RES0) - -#if (SCTLR_EL1_SET ^ SCTLR_EL1_CLEAR) != 0xffffffffffffffffUL -#error "Inconsistent SCTLR_EL1 set/clear bits" -#endif /* id_aa64isar0 */ #define ID_AA64ISAR0_TS_SHIFT 52 @@ -549,6 +554,7 @@ /* id_aa64isar1 */ #define ID_AA64ISAR1_SB_SHIFT 36 +#define ID_AA64ISAR1_FRINTTS_SHIFT 32 #define ID_AA64ISAR1_GPI_SHIFT 28 #define ID_AA64ISAR1_GPA_SHIFT 24 #define ID_AA64ISAR1_LRCPC_SHIFT 20 @@ -724,13 +730,13 @@ #define ZCR_ELx_LEN_SIZE 9 #define ZCR_ELx_LEN_MASK 0x1ff -#define CPACR_EL1_ZEN_EL1EN (_BITUL(16)) /* enable EL1 access */ -#define CPACR_EL1_ZEN_EL0EN (_BITUL(17)) /* enable EL0 access, if EL1EN set */ +#define CPACR_EL1_ZEN_EL1EN (BIT(16)) /* enable EL1 access */ +#define CPACR_EL1_ZEN_EL0EN (BIT(17)) /* enable EL0 access, if EL1EN set */ #define CPACR_EL1_ZEN (CPACR_EL1_ZEN_EL1EN | CPACR_EL1_ZEN_EL0EN) /* Safe value for MPIDR_EL1: Bit31:RES1, Bit30:U:0, Bit24:MT:0 */ -#define SYS_MPIDR_SAFE_VAL (_BITUL(31)) +#define SYS_MPIDR_SAFE_VAL (BIT(31)) #ifdef __ASSEMBLY__ diff --git a/arch/arm64/include/asm/thread_info.h b/arch/arm64/include/asm/thread_info.h index 2372e97db29c..f0cec4160136 100644 --- a/arch/arm64/include/asm/thread_info.h +++ b/arch/arm64/include/asm/thread_info.h @@ -8,8 +8,6 @@ #ifndef __ASM_THREAD_INFO_H #define __ASM_THREAD_INFO_H -#ifdef __KERNEL__ - #include <linux/compiler.h> #ifndef __ASSEMBLY__ @@ -59,27 +57,18 @@ void arch_release_task_struct(struct task_struct *tsk); #endif -/* - * thread information flags: - * TIF_SYSCALL_TRACE - syscall trace active - * TIF_SYSCALL_TRACEPOINT - syscall tracepoint for ftrace - * TIF_SYSCALL_AUDIT - syscall auditing - * TIF_SECCOMP - syscall secure computing - * TIF_SIGPENDING - signal pending - * TIF_NEED_RESCHED - rescheduling necessary - * TIF_NOTIFY_RESUME - callback before returning to user - */ -#define TIF_SIGPENDING 0 -#define TIF_NEED_RESCHED 1 +#define TIF_SIGPENDING 0 /* signal pending */ +#define TIF_NEED_RESCHED 1 /* rescheduling necessary */ #define TIF_NOTIFY_RESUME 2 /* callback before returning to user */ #define TIF_FOREIGN_FPSTATE 3 /* CPU's FP state is not current's */ #define TIF_UPROBE 4 /* uprobe breakpoint or singlestep */ #define TIF_FSCHECK 5 /* Check FS is USER_DS on return */ #define TIF_NOHZ 7 -#define TIF_SYSCALL_TRACE 8 -#define TIF_SYSCALL_AUDIT 9 -#define TIF_SYSCALL_TRACEPOINT 10 -#define TIF_SECCOMP 11 +#define TIF_SYSCALL_TRACE 8 /* syscall trace active */ +#define TIF_SYSCALL_AUDIT 9 /* syscall auditing */ +#define TIF_SYSCALL_TRACEPOINT 10 /* syscall tracepoint for ftrace */ +#define TIF_SECCOMP 11 /* syscall secure computing */ +#define TIF_SYSCALL_EMU 12 /* syscall emulation active */ #define TIF_MEMDIE 18 /* is terminating due to OOM killer */ #define TIF_FREEZE 19 #define TIF_RESTORE_SIGMASK 20 @@ -88,6 +77,7 @@ void arch_release_task_struct(struct task_struct *tsk); #define TIF_SVE 23 /* Scalable Vector Extension in use */ #define TIF_SVE_VL_INHERIT 24 /* Inherit sve_vl_onexec across exec */ #define TIF_SSBD 25 /* Wants SSB mitigation */ +#define TIF_TAGGED_ADDR 26 /* Allow tagged user addresses */ #define _TIF_SIGPENDING (1 << TIF_SIGPENDING) #define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED) @@ -98,6 +88,7 @@ void arch_release_task_struct(struct task_struct *tsk); #define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT) #define _TIF_SYSCALL_TRACEPOINT (1 << TIF_SYSCALL_TRACEPOINT) #define _TIF_SECCOMP (1 << TIF_SECCOMP) +#define _TIF_SYSCALL_EMU (1 << TIF_SYSCALL_EMU) #define _TIF_UPROBE (1 << TIF_UPROBE) #define _TIF_FSCHECK (1 << TIF_FSCHECK) #define _TIF_32BIT (1 << TIF_32BIT) @@ -109,7 +100,7 @@ void arch_release_task_struct(struct task_struct *tsk); #define _TIF_SYSCALL_WORK (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \ _TIF_SYSCALL_TRACEPOINT | _TIF_SECCOMP | \ - _TIF_NOHZ) + _TIF_NOHZ | _TIF_SYSCALL_EMU) #define INIT_THREAD_INFO(tsk) \ { \ @@ -118,5 +109,4 @@ void arch_release_task_struct(struct task_struct *tsk); .addr_limit = KERNEL_DS, \ } -#endif /* __KERNEL__ */ #endif /* __ASM_THREAD_INFO_H */ diff --git a/arch/arm64/include/asm/tlb.h b/arch/arm64/include/asm/tlb.h index a95d1fcb7e21..b76df828e6b7 100644 --- a/arch/arm64/include/asm/tlb.h +++ b/arch/arm64/include/asm/tlb.h @@ -44,7 +44,7 @@ static inline void tlb_flush(struct mmu_gather *tlb) static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte, unsigned long addr) { - pgtable_page_dtor(pte); + pgtable_pte_page_dtor(pte); tlb_remove_table(tlb, pte); } diff --git a/arch/arm64/include/asm/tlbflush.h b/arch/arm64/include/asm/tlbflush.h index 8af7a85f76bd..bc3949064725 100644 --- a/arch/arm64/include/asm/tlbflush.h +++ b/arch/arm64/include/asm/tlbflush.h @@ -251,6 +251,7 @@ static inline void __flush_tlb_kernel_pgtable(unsigned long kaddr) dsb(ishst); __tlbi(vaae1is, addr); dsb(ish); + isb(); } #endif diff --git a/arch/arm64/include/asm/topology.h b/arch/arm64/include/asm/topology.h index 0524f2438649..a4d945db95a2 100644 --- a/arch/arm64/include/asm/topology.h +++ b/arch/arm64/include/asm/topology.h @@ -4,29 +4,6 @@ #include <linux/cpumask.h> -struct cpu_topology { - int thread_id; - int core_id; - int package_id; - int llc_id; - cpumask_t thread_sibling; - cpumask_t core_sibling; - cpumask_t llc_sibling; -}; - -extern struct cpu_topology cpu_topology[NR_CPUS]; - -#define topology_physical_package_id(cpu) (cpu_topology[cpu].package_id) -#define topology_core_id(cpu) (cpu_topology[cpu].core_id) -#define topology_core_cpumask(cpu) (&cpu_topology[cpu].core_sibling) -#define topology_sibling_cpumask(cpu) (&cpu_topology[cpu].thread_sibling) -#define topology_llc_cpumask(cpu) (&cpu_topology[cpu].llc_sibling) - -void init_cpu_topology(void); -void store_cpu_topology(unsigned int cpuid); -void remove_cpu_topology(unsigned int cpuid); -const struct cpumask *cpu_coregroup_mask(int cpu); - #ifdef CONFIG_NUMA struct pci_bus; diff --git a/arch/arm64/include/asm/uaccess.h b/arch/arm64/include/asm/uaccess.h index 5a1c32260c1f..097d6bfac0b7 100644 --- a/arch/arm64/include/asm/uaccess.h +++ b/arch/arm64/include/asm/uaccess.h @@ -62,6 +62,10 @@ static inline unsigned long __range_ok(const void __user *addr, unsigned long si { unsigned long ret, limit = current_thread_info()->addr_limit; + if (IS_ENABLED(CONFIG_ARM64_TAGGED_ADDR_ABI) && + test_thread_flag(TIF_TAGGED_ADDR)) + addr = untagged_addr(addr); + __chk_user_ptr(addr); asm volatile( // A + B <= C + 1 for all A,B,C, in four easy steps: @@ -215,7 +219,8 @@ static inline void uaccess_enable_not_uao(void) /* * Sanitise a uaccess pointer such that it becomes NULL if above the - * current addr_limit. + * current addr_limit. In case the pointer is tagged (has the top byte set), + * untag the pointer before checking. */ #define uaccess_mask_ptr(ptr) (__typeof__(ptr))__uaccess_mask_ptr(ptr) static inline void __user *__uaccess_mask_ptr(const void __user *ptr) @@ -223,10 +228,11 @@ static inline void __user *__uaccess_mask_ptr(const void __user *ptr) void __user *safe_ptr; asm volatile( - " bics xzr, %1, %2\n" + " bics xzr, %3, %2\n" " csel %0, %1, xzr, eq\n" : "=&r" (safe_ptr) - : "r" (ptr), "r" (current_thread_info()->addr_limit) + : "r" (ptr), "r" (current_thread_info()->addr_limit), + "r" (untagged_addr(ptr)) : "cc"); csdb(); diff --git a/arch/arm64/include/asm/unistd.h b/arch/arm64/include/asm/unistd.h index c9f8dd421c5f..2629a68b8724 100644 --- a/arch/arm64/include/asm/unistd.h +++ b/arch/arm64/include/asm/unistd.h @@ -22,8 +22,13 @@ #define __NR_compat_exit 1 #define __NR_compat_read 3 #define __NR_compat_write 4 +#define __NR_compat_gettimeofday 78 #define __NR_compat_sigreturn 119 #define __NR_compat_rt_sigreturn 173 +#define __NR_compat_clock_getres 247 +#define __NR_compat_clock_gettime 263 +#define __NR_compat_clock_gettime64 403 +#define __NR_compat_clock_getres_time64 406 /* * The following SVCs are ARM private. @@ -33,10 +38,11 @@ #define __ARM_NR_compat_set_tls (__ARM_NR_COMPAT_BASE + 5) #define __ARM_NR_COMPAT_END (__ARM_NR_COMPAT_BASE + 0x800) -#define __NR_compat_syscalls 434 +#define __NR_compat_syscalls 436 #endif #define __ARCH_WANT_SYS_CLONE +#define __ARCH_WANT_SYS_CLONE3 #ifndef __COMPAT_SYSCALL_NR #include <uapi/asm/unistd.h> diff --git a/arch/arm64/include/asm/unistd32.h b/arch/arm64/include/asm/unistd32.h index aa995920bd34..94ab29cf4f00 100644 --- a/arch/arm64/include/asm/unistd32.h +++ b/arch/arm64/include/asm/unistd32.h @@ -875,6 +875,10 @@ __SYSCALL(__NR_fsconfig, sys_fsconfig) __SYSCALL(__NR_fsmount, sys_fsmount) #define __NR_fspick 433 __SYSCALL(__NR_fspick, sys_fspick) +#define __NR_pidfd_open 434 +__SYSCALL(__NR_pidfd_open, sys_pidfd_open) +#define __NR_clone3 435 +__SYSCALL(__NR_clone3, sys_clone3) /* * Please add new compat syscalls above this comment and update diff --git a/arch/arm64/include/asm/vdso.h b/arch/arm64/include/asm/vdso.h index 1f94ec19903c..07468428fd29 100644 --- a/arch/arm64/include/asm/vdso.h +++ b/arch/arm64/include/asm/vdso.h @@ -5,8 +5,6 @@ #ifndef __ASM_VDSO_H #define __ASM_VDSO_H -#ifdef __KERNEL__ - /* * Default link address for the vDSO. * Since we randomise the VDSO mapping, there's little point in trying @@ -17,6 +15,9 @@ #ifndef __ASSEMBLY__ #include <generated/vdso-offsets.h> +#ifdef CONFIG_COMPAT_VDSO +#include <generated/vdso32-offsets.h> +#endif #define VDSO_SYMBOL(base, name) \ ({ \ @@ -25,6 +26,4 @@ #endif /* !__ASSEMBLY__ */ -#endif /* __KERNEL__ */ - #endif /* __ASM_VDSO_H */ diff --git a/arch/arm64/include/asm/vdso/compat_barrier.h b/arch/arm64/include/asm/vdso/compat_barrier.h new file mode 100644 index 000000000000..fb60a88b5ed4 --- /dev/null +++ b/arch/arm64/include/asm/vdso/compat_barrier.h @@ -0,0 +1,44 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2018 ARM Limited + */ +#ifndef __COMPAT_BARRIER_H +#define __COMPAT_BARRIER_H + +#ifndef __ASSEMBLY__ +/* + * Warning: This code is meant to be used with + * ENABLE_COMPAT_VDSO only. + */ +#ifndef ENABLE_COMPAT_VDSO +#error This header is meant to be used with ENABLE_COMPAT_VDSO only +#endif + +#ifdef dmb +#undef dmb +#endif + +#define dmb(option) __asm__ __volatile__ ("dmb " #option : : : "memory") + +#if __LINUX_ARM_ARCH__ >= 8 +#define aarch32_smp_mb() dmb(ish) +#define aarch32_smp_rmb() dmb(ishld) +#define aarch32_smp_wmb() dmb(ishst) +#else +#define aarch32_smp_mb() dmb(ish) +#define aarch32_smp_rmb() aarch32_smp_mb() +#define aarch32_smp_wmb() dmb(ishst) +#endif + + +#undef smp_mb +#undef smp_rmb +#undef smp_wmb + +#define smp_mb() aarch32_smp_mb() +#define smp_rmb() aarch32_smp_rmb() +#define smp_wmb() aarch32_smp_wmb() + +#endif /* !__ASSEMBLY__ */ + +#endif /* __COMPAT_BARRIER_H */ diff --git a/arch/arm64/include/asm/vdso/compat_gettimeofday.h b/arch/arm64/include/asm/vdso/compat_gettimeofday.h new file mode 100644 index 000000000000..c50ee1b7d5cd --- /dev/null +++ b/arch/arm64/include/asm/vdso/compat_gettimeofday.h @@ -0,0 +1,166 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2018 ARM Limited + */ +#ifndef __ASM_VDSO_GETTIMEOFDAY_H +#define __ASM_VDSO_GETTIMEOFDAY_H + +#ifndef __ASSEMBLY__ + +#include <asm/unistd.h> +#include <uapi/linux/time.h> + +#include <asm/vdso/compat_barrier.h> + +#define __VDSO_USE_SYSCALL ULLONG_MAX + +#define VDSO_HAS_CLOCK_GETRES 1 + +#define VDSO_HAS_32BIT_FALLBACK 1 + +static __always_inline +int gettimeofday_fallback(struct __kernel_old_timeval *_tv, + struct timezone *_tz) +{ + register struct timezone *tz asm("r1") = _tz; + register struct __kernel_old_timeval *tv asm("r0") = _tv; + register long ret asm ("r0"); + register long nr asm("r7") = __NR_compat_gettimeofday; + + asm volatile( + " swi #0\n" + : "=r" (ret) + : "r" (tv), "r" (tz), "r" (nr) + : "memory"); + + return ret; +} + +static __always_inline +long clock_gettime_fallback(clockid_t _clkid, struct __kernel_timespec *_ts) +{ + register struct __kernel_timespec *ts asm("r1") = _ts; + register clockid_t clkid asm("r0") = _clkid; + register long ret asm ("r0"); + register long nr asm("r7") = __NR_compat_clock_gettime64; + + asm volatile( + " swi #0\n" + : "=r" (ret) + : "r" (clkid), "r" (ts), "r" (nr) + : "memory"); + + return ret; +} + +static __always_inline +long clock_gettime32_fallback(clockid_t _clkid, struct old_timespec32 *_ts) +{ + register struct old_timespec32 *ts asm("r1") = _ts; + register clockid_t clkid asm("r0") = _clkid; + register long ret asm ("r0"); + register long nr asm("r7") = __NR_compat_clock_gettime; + + asm volatile( + " swi #0\n" + : "=r" (ret) + : "r" (clkid), "r" (ts), "r" (nr) + : "memory"); + + return ret; +} + +static __always_inline +int clock_getres_fallback(clockid_t _clkid, struct __kernel_timespec *_ts) +{ + register struct __kernel_timespec *ts asm("r1") = _ts; + register clockid_t clkid asm("r0") = _clkid; + register long ret asm ("r0"); + register long nr asm("r7") = __NR_compat_clock_getres_time64; + + /* The checks below are required for ABI consistency with arm */ + if ((_clkid >= MAX_CLOCKS) && (_ts == NULL)) + return -EINVAL; + + asm volatile( + " swi #0\n" + : "=r" (ret) + : "r" (clkid), "r" (ts), "r" (nr) + : "memory"); + + return ret; +} + +static __always_inline +int clock_getres32_fallback(clockid_t _clkid, struct old_timespec32 *_ts) +{ + register struct old_timespec32 *ts asm("r1") = _ts; + register clockid_t clkid asm("r0") = _clkid; + register long ret asm ("r0"); + register long nr asm("r7") = __NR_compat_clock_getres; + + /* The checks below are required for ABI consistency with arm */ + if ((_clkid >= MAX_CLOCKS) && (_ts == NULL)) + return -EINVAL; + + asm volatile( + " swi #0\n" + : "=r" (ret) + : "r" (clkid), "r" (ts), "r" (nr) + : "memory"); + + return ret; +} + +static __always_inline u64 __arch_get_hw_counter(s32 clock_mode) +{ + u64 res; + + /* + * clock_mode == 0 implies that vDSO are enabled otherwise + * fallback on syscall. + */ + if (clock_mode) + return __VDSO_USE_SYSCALL; + + /* + * This isb() is required to prevent that the counter value + * is speculated. + */ + isb(); + asm volatile("mrrc p15, 1, %Q0, %R0, c14" : "=r" (res)); + /* + * This isb() is required to prevent that the seq lock is + * speculated. + */ + isb(); + + return res; +} + +static __always_inline const struct vdso_data *__arch_get_vdso_data(void) +{ + const struct vdso_data *ret; + + /* + * This simply puts &_vdso_data into ret. The reason why we don't use + * `ret = _vdso_data` is that the compiler tends to optimise this in a + * very suboptimal way: instead of keeping &_vdso_data in a register, + * it goes through a relocation almost every time _vdso_data must be + * accessed (even in subfunctions). This is both time and space + * consuming: each relocation uses a word in the code section, and it + * has to be loaded at runtime. + * + * This trick hides the assignment from the compiler. Since it cannot + * track where the pointer comes from, it will only use one relocation + * where __arch_get_vdso_data() is called, and then keep the result in + * a register. + */ + asm volatile("mov %0, %1" : "=r"(ret) : "r"(_vdso_data)); + + return ret; +} + +#endif /* !__ASSEMBLY__ */ + +#endif /* __ASM_VDSO_GETTIMEOFDAY_H */ diff --git a/arch/arm64/include/asm/vdso/gettimeofday.h b/arch/arm64/include/asm/vdso/gettimeofday.h new file mode 100644 index 000000000000..b08f476b72b4 --- /dev/null +++ b/arch/arm64/include/asm/vdso/gettimeofday.h @@ -0,0 +1,103 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2018 ARM Limited + */ +#ifndef __ASM_VDSO_GETTIMEOFDAY_H +#define __ASM_VDSO_GETTIMEOFDAY_H + +#ifndef __ASSEMBLY__ + +#include <asm/unistd.h> +#include <uapi/linux/time.h> + +#define __VDSO_USE_SYSCALL ULLONG_MAX + +#define VDSO_HAS_CLOCK_GETRES 1 + +static __always_inline +int gettimeofday_fallback(struct __kernel_old_timeval *_tv, + struct timezone *_tz) +{ + register struct timezone *tz asm("x1") = _tz; + register struct __kernel_old_timeval *tv asm("x0") = _tv; + register long ret asm ("x0"); + register long nr asm("x8") = __NR_gettimeofday; + + asm volatile( + " svc #0\n" + : "=r" (ret) + : "r" (tv), "r" (tz), "r" (nr) + : "memory"); + + return ret; +} + +static __always_inline +long clock_gettime_fallback(clockid_t _clkid, struct __kernel_timespec *_ts) +{ + register struct __kernel_timespec *ts asm("x1") = _ts; + register clockid_t clkid asm("x0") = _clkid; + register long ret asm ("x0"); + register long nr asm("x8") = __NR_clock_gettime; + + asm volatile( + " svc #0\n" + : "=r" (ret) + : "r" (clkid), "r" (ts), "r" (nr) + : "memory"); + + return ret; +} + +static __always_inline +int clock_getres_fallback(clockid_t _clkid, struct __kernel_timespec *_ts) +{ + register struct __kernel_timespec *ts asm("x1") = _ts; + register clockid_t clkid asm("x0") = _clkid; + register long ret asm ("x0"); + register long nr asm("x8") = __NR_clock_getres; + + asm volatile( + " svc #0\n" + : "=r" (ret) + : "r" (clkid), "r" (ts), "r" (nr) + : "memory"); + + return ret; +} + +static __always_inline u64 __arch_get_hw_counter(s32 clock_mode) +{ + u64 res; + + /* + * clock_mode == 0 implies that vDSO are enabled otherwise + * fallback on syscall. + */ + if (clock_mode) + return __VDSO_USE_SYSCALL; + + /* + * This isb() is required to prevent that the counter value + * is speculated. + */ + isb(); + asm volatile("mrs %0, cntvct_el0" : "=r" (res) :: "memory"); + /* + * This isb() is required to prevent that the seq lock is + * speculated.# + */ + isb(); + + return res; +} + +static __always_inline +const struct vdso_data *__arch_get_vdso_data(void) +{ + return _vdso_data; +} + +#endif /* !__ASSEMBLY__ */ + +#endif /* __ASM_VDSO_GETTIMEOFDAY_H */ diff --git a/arch/arm64/include/asm/vdso/vsyscall.h b/arch/arm64/include/asm/vdso/vsyscall.h new file mode 100644 index 000000000000..0c731bfc7c8c --- /dev/null +++ b/arch/arm64/include/asm/vdso/vsyscall.h @@ -0,0 +1,53 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __ASM_VDSO_VSYSCALL_H +#define __ASM_VDSO_VSYSCALL_H + +#ifndef __ASSEMBLY__ + +#include <linux/timekeeper_internal.h> +#include <vdso/datapage.h> + +#define VDSO_PRECISION_MASK ~(0xFF00ULL<<48) + +extern struct vdso_data *vdso_data; + +/* + * Update the vDSO data page to keep in sync with kernel timekeeping. + */ +static __always_inline +struct vdso_data *__arm64_get_k_vdso_data(void) +{ + return vdso_data; +} +#define __arch_get_k_vdso_data __arm64_get_k_vdso_data + +static __always_inline +int __arm64_get_clock_mode(struct timekeeper *tk) +{ + u32 use_syscall = !tk->tkr_mono.clock->archdata.vdso_direct; + + return use_syscall; +} +#define __arch_get_clock_mode __arm64_get_clock_mode + +static __always_inline +int __arm64_use_vsyscall(struct vdso_data *vdata) +{ + return !vdata[CS_HRES_COARSE].clock_mode; +} +#define __arch_use_vsyscall __arm64_use_vsyscall + +static __always_inline +void __arm64_update_vsyscall(struct vdso_data *vdata, struct timekeeper *tk) +{ + vdata[CS_HRES_COARSE].mask = VDSO_PRECISION_MASK; + vdata[CS_RAW].mask = VDSO_PRECISION_MASK; +} +#define __arch_update_vsyscall __arm64_update_vsyscall + +/* The asm-generic header needs to be included after the definitions above */ +#include <asm-generic/vdso/vsyscall.h> + +#endif /* !__ASSEMBLY__ */ + +#endif /* __ASM_VDSO_VSYSCALL_H */ diff --git a/arch/arm64/include/asm/vdso_datapage.h b/arch/arm64/include/asm/vdso_datapage.h index ba6dbc3de864..1f38bf330a6e 100644 --- a/arch/arm64/include/asm/vdso_datapage.h +++ b/arch/arm64/include/asm/vdso_datapage.h @@ -5,8 +5,6 @@ #ifndef __ASM_VDSO_DATAPAGE_H #define __ASM_VDSO_DATAPAGE_H -#ifdef __KERNEL__ - #ifndef __ASSEMBLY__ struct vdso_data { @@ -32,6 +30,4 @@ struct vdso_data { #endif /* !__ASSEMBLY__ */ -#endif /* __KERNEL__ */ - #endif /* __ASM_VDSO_DATAPAGE_H */ diff --git a/arch/arm64/include/asm/xen/page-coherent.h b/arch/arm64/include/asm/xen/page-coherent.h index d88e56b90b93..27e984977402 100644 --- a/arch/arm64/include/asm/xen/page-coherent.h +++ b/arch/arm64/include/asm/xen/page-coherent.h @@ -1,77 +1,2 @@ /* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _ASM_ARM64_XEN_PAGE_COHERENT_H -#define _ASM_ARM64_XEN_PAGE_COHERENT_H - -#include <linux/dma-mapping.h> -#include <asm/page.h> #include <xen/arm/page-coherent.h> - -static inline void *xen_alloc_coherent_pages(struct device *hwdev, size_t size, - dma_addr_t *dma_handle, gfp_t flags, unsigned long attrs) -{ - return dma_direct_alloc(hwdev, size, dma_handle, flags, attrs); -} - -static inline void xen_free_coherent_pages(struct device *hwdev, size_t size, - void *cpu_addr, dma_addr_t dma_handle, unsigned long attrs) -{ - dma_direct_free(hwdev, size, cpu_addr, dma_handle, attrs); -} - -static inline void xen_dma_sync_single_for_cpu(struct device *hwdev, - dma_addr_t handle, size_t size, enum dma_data_direction dir) -{ - unsigned long pfn = PFN_DOWN(handle); - - if (pfn_valid(pfn)) - dma_direct_sync_single_for_cpu(hwdev, handle, size, dir); - else - __xen_dma_sync_single_for_cpu(hwdev, handle, size, dir); -} - -static inline void xen_dma_sync_single_for_device(struct device *hwdev, - dma_addr_t handle, size_t size, enum dma_data_direction dir) -{ - unsigned long pfn = PFN_DOWN(handle); - if (pfn_valid(pfn)) - dma_direct_sync_single_for_device(hwdev, handle, size, dir); - else - __xen_dma_sync_single_for_device(hwdev, handle, size, dir); -} - -static inline void xen_dma_map_page(struct device *hwdev, struct page *page, - dma_addr_t dev_addr, unsigned long offset, size_t size, - enum dma_data_direction dir, unsigned long attrs) -{ - unsigned long page_pfn = page_to_xen_pfn(page); - unsigned long dev_pfn = XEN_PFN_DOWN(dev_addr); - unsigned long compound_pages = - (1<<compound_order(page)) * XEN_PFN_PER_PAGE; - bool local = (page_pfn <= dev_pfn) && - (dev_pfn - page_pfn < compound_pages); - - if (local) - dma_direct_map_page(hwdev, page, offset, size, dir, attrs); - else - __xen_dma_map_page(hwdev, page, dev_addr, offset, size, dir, attrs); -} - -static inline void xen_dma_unmap_page(struct device *hwdev, dma_addr_t handle, - size_t size, enum dma_data_direction dir, unsigned long attrs) -{ - unsigned long pfn = PFN_DOWN(handle); - /* - * Dom0 is mapped 1:1, while the Linux page can be spanned accross - * multiple Xen page, it's not possible to have a mix of local and - * foreign Xen page. Dom0 is mapped 1:1, so calling pfn_valid on a - * foreign mfn will always return false. If the page is local we can - * safely call the native dma_ops function, otherwise we call the xen - * specific function. - */ - if (pfn_valid(pfn)) - dma_direct_unmap_page(hwdev, handle, size, dir, attrs); - else - __xen_dma_unmap_page(hwdev, handle, size, dir, attrs); -} - -#endif /* _ASM_ARM64_XEN_PAGE_COHERENT_H */ diff --git a/arch/arm64/include/uapi/asm/bpf_perf_event.h b/arch/arm64/include/uapi/asm/bpf_perf_event.h index b551b741653d..5e1e648aeec4 100644 --- a/arch/arm64/include/uapi/asm/bpf_perf_event.h +++ b/arch/arm64/include/uapi/asm/bpf_perf_event.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0 */ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ #ifndef _UAPI__ASM_BPF_PERF_EVENT_H__ #define _UAPI__ASM_BPF_PERF_EVENT_H__ diff --git a/arch/arm64/include/uapi/asm/hwcap.h b/arch/arm64/include/uapi/asm/hwcap.h index 1a772b162191..a1e72886b30c 100644 --- a/arch/arm64/include/uapi/asm/hwcap.h +++ b/arch/arm64/include/uapi/asm/hwcap.h @@ -63,5 +63,7 @@ #define HWCAP2_SVEBITPERM (1 << 4) #define HWCAP2_SVESHA3 (1 << 5) #define HWCAP2_SVESM4 (1 << 6) +#define HWCAP2_FLAGM2 (1 << 7) +#define HWCAP2_FRINT (1 << 8) #endif /* _UAPI__ASM_HWCAP_H */ diff --git a/arch/arm64/include/uapi/asm/kvm.h b/arch/arm64/include/uapi/asm/kvm.h index d819a3e8b552..67c21f9bdbad 100644 --- a/arch/arm64/include/uapi/asm/kvm.h +++ b/arch/arm64/include/uapi/asm/kvm.h @@ -229,6 +229,16 @@ struct kvm_vcpu_events { #define KVM_REG_ARM_FW_REG(r) (KVM_REG_ARM64 | KVM_REG_SIZE_U64 | \ KVM_REG_ARM_FW | ((r) & 0xffff)) #define KVM_REG_ARM_PSCI_VERSION KVM_REG_ARM_FW_REG(0) +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1 KVM_REG_ARM_FW_REG(1) +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_NOT_AVAIL 0 +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_AVAIL 1 +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_NOT_REQUIRED 2 +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2 KVM_REG_ARM_FW_REG(2) +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_AVAIL 0 +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_UNKNOWN 1 +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_AVAIL 2 +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_REQUIRED 3 +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_ENABLED (1U << 4) /* SVE registers */ #define KVM_REG_ARM64_SVE (0x15 << KVM_REG_ARM_COPROC_SHIFT) @@ -315,8 +325,10 @@ struct kvm_vcpu_events { #define KVM_ARM_VCPU_TIMER_IRQ_PTIMER 1 /* KVM_IRQ_LINE irq field index values */ +#define KVM_ARM_IRQ_VCPU2_SHIFT 28 +#define KVM_ARM_IRQ_VCPU2_MASK 0xf #define KVM_ARM_IRQ_TYPE_SHIFT 24 -#define KVM_ARM_IRQ_TYPE_MASK 0xff +#define KVM_ARM_IRQ_TYPE_MASK 0xf #define KVM_ARM_IRQ_VCPU_SHIFT 16 #define KVM_ARM_IRQ_VCPU_MASK 0xff #define KVM_ARM_IRQ_NUM_SHIFT 0 diff --git a/arch/arm64/include/uapi/asm/ptrace.h b/arch/arm64/include/uapi/asm/ptrace.h index e932284993d4..7ed9294e2004 100644 --- a/arch/arm64/include/uapi/asm/ptrace.h +++ b/arch/arm64/include/uapi/asm/ptrace.h @@ -62,6 +62,9 @@ #define PSR_x 0x0000ff00 /* Extension */ #define PSR_c 0x000000ff /* Control */ +/* syscall emulation path in ptrace */ +#define PTRACE_SYSEMU 31 +#define PTRACE_SYSEMU_SINGLESTEP 32 #ifndef __ASSEMBLY__ diff --git a/arch/arm64/include/uapi/asm/sigcontext.h b/arch/arm64/include/uapi/asm/sigcontext.h index 3d448a0bb225..8b0ebce92427 100644 --- a/arch/arm64/include/uapi/asm/sigcontext.h +++ b/arch/arm64/include/uapi/asm/sigcontext.h @@ -146,7 +146,7 @@ struct sve_context { * vector length beyond its initial architectural limit of 2048 bits * (16 quadwords). * - * See linux/Documentation/arm64/sve.txt for a description of the VL/VQ + * See linux/Documentation/arm64/sve.rst for a description of the VL/VQ * terminology. */ #define SVE_VQ_BYTES __SVE_VQ_BYTES /* bytes per quadword */ diff --git a/arch/arm64/include/uapi/asm/stat.h b/arch/arm64/include/uapi/asm/stat.h deleted file mode 100644 index 313325fa22fa..000000000000 --- a/arch/arm64/include/uapi/asm/stat.h +++ /dev/null @@ -1,17 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* - * Copyright (C) 2012 ARM Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#include <asm-generic/stat.h> diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile index 9e7dcb2c31c7..478491f07b4f 100644 --- a/arch/arm64/kernel/Makefile +++ b/arch/arm64/kernel/Makefile @@ -28,7 +28,10 @@ $(obj)/%.stub.o: $(obj)/%.o FORCE $(call if_changed,objcopy) obj-$(CONFIG_COMPAT) += sys32.o signal32.o \ - sigreturn32.o sys_compat.o + sys_compat.o +ifneq ($(CONFIG_COMPAT_VDSO), y) +obj-$(CONFIG_COMPAT) += sigreturn32.o +endif obj-$(CONFIG_KUSER_HELPERS) += kuser32.o obj-$(CONFIG_FUNCTION_TRACER) += ftrace.o entry-ftrace.o obj-$(CONFIG_MODULES) += module.o @@ -62,6 +65,7 @@ obj-$(CONFIG_ARM64_SSBD) += ssbd.o obj-$(CONFIG_ARM64_PTR_AUTH) += pointer_auth.o obj-y += vdso/ probes/ +obj-$(CONFIG_COMPAT_VDSO) += vdso32/ head-y := head.o extra-y += $(head-y) vmlinux.lds diff --git a/arch/arm64/kernel/acpi.c b/arch/arm64/kernel/acpi.c index 2804330c95dc..3a58e9db5cfe 100644 --- a/arch/arm64/kernel/acpi.c +++ b/arch/arm64/kernel/acpi.c @@ -152,10 +152,14 @@ static int __init acpi_fadt_sanity_check(void) */ if (table->revision < 5 || (table->revision == 5 && fadt->minor_revision < 1)) { - pr_err("Unsupported FADT revision %d.%d, should be 5.1+\n", + pr_err(FW_BUG "Unsupported FADT revision %d.%d, should be 5.1+\n", table->revision, fadt->minor_revision); - ret = -EINVAL; - goto out; + + if (!fadt->arm_boot_flags) { + ret = -EINVAL; + goto out; + } + pr_err("FADT has ARM boot flags set, assuming 5.1\n"); } if (!(fadt->flags & ACPI_FADT_HW_REDUCED)) { diff --git a/arch/arm64/kernel/asm-offsets.c b/arch/arm64/kernel/asm-offsets.c index 02f08768c298..214685760e1c 100644 --- a/arch/arm64/kernel/asm-offsets.c +++ b/arch/arm64/kernel/asm-offsets.c @@ -18,9 +18,9 @@ #include <asm/fixmap.h> #include <asm/thread_info.h> #include <asm/memory.h> +#include <asm/signal32.h> #include <asm/smp_plat.h> #include <asm/suspend.h> -#include <asm/vdso_datapage.h> #include <linux/kbuild.h> #include <linux/arm-smccc.h> @@ -66,6 +66,11 @@ int main(void) DEFINE(S_STACKFRAME, offsetof(struct pt_regs, stackframe)); DEFINE(S_FRAME_SIZE, sizeof(struct pt_regs)); BLANK(); +#ifdef CONFIG_COMPAT + DEFINE(COMPAT_SIGFRAME_REGS_OFFSET, offsetof(struct compat_sigframe, uc.uc_mcontext.arm_r0)); + DEFINE(COMPAT_RT_SIGFRAME_REGS_OFFSET, offsetof(struct compat_rt_sigframe, sig.uc.uc_mcontext.arm_r0)); + BLANK(); +#endif DEFINE(MM_CONTEXT_ID, offsetof(struct mm_struct, context.id.counter)); BLANK(); DEFINE(VMA_VM_MM, offsetof(struct vm_area_struct, vm_mm)); @@ -80,33 +85,6 @@ int main(void) BLANK(); DEFINE(PREEMPT_DISABLE_OFFSET, PREEMPT_DISABLE_OFFSET); BLANK(); - DEFINE(CLOCK_REALTIME, CLOCK_REALTIME); - DEFINE(CLOCK_MONOTONIC, CLOCK_MONOTONIC); - DEFINE(CLOCK_MONOTONIC_RAW, CLOCK_MONOTONIC_RAW); - DEFINE(CLOCK_REALTIME_RES, offsetof(struct vdso_data, hrtimer_res)); - DEFINE(CLOCK_REALTIME_COARSE, CLOCK_REALTIME_COARSE); - DEFINE(CLOCK_MONOTONIC_COARSE,CLOCK_MONOTONIC_COARSE); - DEFINE(CLOCK_COARSE_RES, LOW_RES_NSEC); - DEFINE(NSEC_PER_SEC, NSEC_PER_SEC); - BLANK(); - DEFINE(VDSO_CS_CYCLE_LAST, offsetof(struct vdso_data, cs_cycle_last)); - DEFINE(VDSO_RAW_TIME_SEC, offsetof(struct vdso_data, raw_time_sec)); - DEFINE(VDSO_XTIME_CLK_SEC, offsetof(struct vdso_data, xtime_clock_sec)); - DEFINE(VDSO_XTIME_CRS_SEC, offsetof(struct vdso_data, xtime_coarse_sec)); - DEFINE(VDSO_XTIME_CRS_NSEC, offsetof(struct vdso_data, xtime_coarse_nsec)); - DEFINE(VDSO_WTM_CLK_SEC, offsetof(struct vdso_data, wtm_clock_sec)); - DEFINE(VDSO_TB_SEQ_COUNT, offsetof(struct vdso_data, tb_seq_count)); - DEFINE(VDSO_CS_MONO_MULT, offsetof(struct vdso_data, cs_mono_mult)); - DEFINE(VDSO_CS_SHIFT, offsetof(struct vdso_data, cs_shift)); - DEFINE(VDSO_TZ_MINWEST, offsetof(struct vdso_data, tz_minuteswest)); - DEFINE(VDSO_USE_SYSCALL, offsetof(struct vdso_data, use_syscall)); - BLANK(); - DEFINE(TVAL_TV_SEC, offsetof(struct timeval, tv_sec)); - DEFINE(TSPEC_TV_SEC, offsetof(struct timespec, tv_sec)); - BLANK(); - DEFINE(TZ_MINWEST, offsetof(struct timezone, tz_minuteswest)); - DEFINE(TZ_DSTTIME, offsetof(struct timezone, tz_dsttime)); - BLANK(); DEFINE(CPU_BOOT_STACK, offsetof(struct secondary_data, stack)); DEFINE(CPU_BOOT_TASK, offsetof(struct secondary_data, task)); BLANK(); diff --git a/arch/arm64/kernel/cacheinfo.c b/arch/arm64/kernel/cacheinfo.c index 880d79904d36..7fa6828bb488 100644 --- a/arch/arm64/kernel/cacheinfo.c +++ b/arch/arm64/kernel/cacheinfo.c @@ -17,6 +17,15 @@ #define CLIDR_CTYPE(clidr, level) \ (((clidr) & CLIDR_CTYPE_MASK(level)) >> CLIDR_CTYPE_SHIFT(level)) +int cache_line_size(void) +{ + if (coherency_max_size != 0) + return coherency_max_size; + + return cache_line_size_of_cpu(); +} +EXPORT_SYMBOL_GPL(cache_line_size); + static inline enum cache_type get_cache_type(int level) { u64 clidr; diff --git a/arch/arm64/kernel/cpu_errata.c b/arch/arm64/kernel/cpu_errata.c index ca11ff7bf55e..1e43ba5c79b7 100644 --- a/arch/arm64/kernel/cpu_errata.c +++ b/arch/arm64/kernel/cpu_errata.c @@ -554,6 +554,17 @@ cpu_enable_cache_maint_trap(const struct arm64_cpu_capabilities *__unused) static bool __hardenbp_enab = true; static bool __spectrev2_safe = true; +int get_spectre_v2_workaround_state(void) +{ + if (__spectrev2_safe) + return ARM64_BP_HARDEN_NOT_REQUIRED; + + if (!__hardenbp_enab) + return ARM64_BP_HARDEN_UNKNOWN; + + return ARM64_BP_HARDEN_WA_NEEDED; +} + /* * List of CPUs that do not need any Spectre-v2 mitigation at all. */ @@ -854,13 +865,15 @@ ssize_t cpu_show_spectre_v1(struct device *dev, struct device_attribute *attr, ssize_t cpu_show_spectre_v2(struct device *dev, struct device_attribute *attr, char *buf) { - if (__spectrev2_safe) + switch (get_spectre_v2_workaround_state()) { + case ARM64_BP_HARDEN_NOT_REQUIRED: return sprintf(buf, "Not affected\n"); - - if (__hardenbp_enab) + case ARM64_BP_HARDEN_WA_NEEDED: return sprintf(buf, "Mitigation: Branch predictor hardening\n"); - - return sprintf(buf, "Vulnerable\n"); + case ARM64_BP_HARDEN_UNKNOWN: + default: + return sprintf(buf, "Vulnerable\n"); + } } ssize_t cpu_show_spec_store_bypass(struct device *dev, diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c index aabdabf52fdb..9323bcc40a58 100644 --- a/arch/arm64/kernel/cpufeature.c +++ b/arch/arm64/kernel/cpufeature.c @@ -184,9 +184,17 @@ static const struct arm64_ftr_bits ftr_id_aa64zfr0[] = { }; static const struct arm64_ftr_bits ftr_id_aa64mmfr0[] = { - S_ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_TGRAN4_SHIFT, 4, ID_AA64MMFR0_TGRAN4_NI), - S_ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_TGRAN64_SHIFT, 4, ID_AA64MMFR0_TGRAN64_NI), - ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_TGRAN16_SHIFT, 4, ID_AA64MMFR0_TGRAN16_NI), + /* + * We already refuse to boot CPUs that don't support our configured + * page size, so we can only detect mismatches for a page size other + * than the one we're currently using. Unfortunately, SoCs like this + * exist in the wild so, even though we don't like it, we'll have to go + * along with it and treat them as non-strict. + */ + S_ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_TGRAN4_SHIFT, 4, ID_AA64MMFR0_TGRAN4_NI), + S_ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_TGRAN64_SHIFT, 4, ID_AA64MMFR0_TGRAN64_NI), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_TGRAN16_SHIFT, 4, ID_AA64MMFR0_TGRAN16_NI), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_BIGENDEL0_SHIFT, 4, 0), /* Linux shouldn't care about secure memory */ ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_SNSMEM_SHIFT, 4, 0), @@ -225,8 +233,8 @@ static const struct arm64_ftr_bits ftr_ctr[] = { ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_EXACT, 31, 1, 1), /* RES1 */ ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, CTR_DIC_SHIFT, 1, 1), ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, CTR_IDC_SHIFT, 1, 1), - ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_HIGHER_SAFE, CTR_CWG_SHIFT, 4, 0), - ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_HIGHER_SAFE, CTR_ERG_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_HIGHER_OR_ZERO_SAFE, CTR_CWG_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_HIGHER_OR_ZERO_SAFE, CTR_ERG_SHIFT, 4, 0), ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, CTR_DMINLINE_SHIFT, 4, 1), /* * Linux can handle differing I-cache policies. Userspace JITs will @@ -468,6 +476,10 @@ static s64 arm64_ftr_safe_value(const struct arm64_ftr_bits *ftrp, s64 new, case FTR_LOWER_SAFE: ret = new < cur ? new : cur; break; + case FTR_HIGHER_OR_ZERO_SAFE: + if (!cur || !new) + break; + /* Fallthrough */ case FTR_HIGHER_SAFE: ret = new > cur ? new : cur; break; @@ -882,7 +894,7 @@ static bool has_no_hw_prefetch(const struct arm64_cpu_capabilities *entry, int _ u32 midr = read_cpuid_id(); /* Cavium ThunderX pass 1.x and 2.x */ - return MIDR_IS_CPU_MODEL_RANGE(midr, MIDR_THUNDERX, + return midr_is_cpu_model_range(midr, MIDR_THUNDERX, MIDR_CPU_VAR_REV(0, 0), MIDR_CPU_VAR_REV(1, MIDR_REVISION_MASK)); } @@ -1184,14 +1196,14 @@ static struct undef_hook ssbs_emulation_hook = { static void cpu_enable_ssbs(const struct arm64_cpu_capabilities *__unused) { static bool undef_hook_registered = false; - static DEFINE_SPINLOCK(hook_lock); + static DEFINE_RAW_SPINLOCK(hook_lock); - spin_lock(&hook_lock); + raw_spin_lock(&hook_lock); if (!undef_hook_registered) { register_undef_hook(&ssbs_emulation_hook); undef_hook_registered = true; } - spin_unlock(&hook_lock); + raw_spin_unlock(&hook_lock); if (arm64_get_ssbd_state() == ARM64_SSBD_FORCE_DISABLE) { sysreg_clear_set(sctlr_el1, 0, SCTLR_ELx_DSSBS); @@ -1618,6 +1630,7 @@ static const struct arm64_cpu_capabilities arm64_elf_hwcaps[] = { HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_DP_SHIFT, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_ASIMDDP), HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_FHM_SHIFT, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_ASIMDFHM), HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_TS_SHIFT, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_FLAGM), + HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_TS_SHIFT, FTR_UNSIGNED, 2, CAP_HWCAP, KERNEL_HWCAP_FLAGM2), HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_FP_SHIFT, FTR_SIGNED, 0, CAP_HWCAP, KERNEL_HWCAP_FP), HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_FP_SHIFT, FTR_SIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_FPHP), HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_ASIMD_SHIFT, FTR_SIGNED, 0, CAP_HWCAP, KERNEL_HWCAP_ASIMD), @@ -1629,6 +1642,7 @@ static const struct arm64_cpu_capabilities arm64_elf_hwcaps[] = { HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_FCMA_SHIFT, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_FCMA), HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_LRCPC_SHIFT, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_LRCPC), HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_LRCPC_SHIFT, FTR_UNSIGNED, 2, CAP_HWCAP, KERNEL_HWCAP_ILRCPC), + HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_FRINTTS_SHIFT, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_FRINT), HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_SB_SHIFT, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_SB), HWCAP_CAP(SYS_ID_AA64MMFR2_EL1, ID_AA64MMFR2_AT_SHIFT, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_USCAT), #ifdef CONFIG_ARM64_SVE diff --git a/arch/arm64/kernel/cpuidle.c b/arch/arm64/kernel/cpuidle.c index d1048173fd8a..e4d6af2fdec7 100644 --- a/arch/arm64/kernel/cpuidle.c +++ b/arch/arm64/kernel/cpuidle.c @@ -11,6 +11,7 @@ #include <linux/cpu_pm.h> #include <linux/of.h> #include <linux/of_device.h> +#include <linux/psci.h> #include <asm/cpuidle.h> #include <asm/cpu_ops.h> @@ -46,17 +47,58 @@ int arm_cpuidle_suspend(int index) #define ARM64_LPI_IS_RETENTION_STATE(arch_flags) (!(arch_flags)) +static int psci_acpi_cpu_init_idle(unsigned int cpu) +{ + int i, count; + struct acpi_lpi_state *lpi; + struct acpi_processor *pr = per_cpu(processors, cpu); + + /* + * If the PSCI cpu_suspend function hook has not been initialized + * idle states must not be enabled, so bail out + */ + if (!psci_ops.cpu_suspend) + return -EOPNOTSUPP; + + if (unlikely(!pr || !pr->flags.has_lpi)) + return -EINVAL; + + count = pr->power.count - 1; + if (count <= 0) + return -ENODEV; + + for (i = 0; i < count; i++) { + u32 state; + + lpi = &pr->power.lpi_states[i + 1]; + /* + * Only bits[31:0] represent a PSCI power_state while + * bits[63:32] must be 0x0 as per ARM ACPI FFH Specification + */ + state = lpi->address; + if (!psci_power_state_is_valid(state)) { + pr_warn("Invalid PSCI power state %#x\n", state); + return -EINVAL; + } + } + + return 0; +} + int acpi_processor_ffh_lpi_probe(unsigned int cpu) { - return arm_cpuidle_init(cpu); + return psci_acpi_cpu_init_idle(cpu); } int acpi_processor_ffh_lpi_enter(struct acpi_lpi_state *lpi) { + u32 state = lpi->address; + if (ARM64_LPI_IS_RETENTION_STATE(lpi->arch_flags)) - return CPU_PM_CPU_IDLE_ENTER_RETENTION(arm_cpuidle_suspend, - lpi->index); + return CPU_PM_CPU_IDLE_ENTER_RETENTION_PARAM(psci_cpu_suspend_enter, + lpi->index, state); else - return CPU_PM_CPU_IDLE_ENTER(arm_cpuidle_suspend, lpi->index); + return CPU_PM_CPU_IDLE_ENTER_PARAM(psci_cpu_suspend_enter, + lpi->index, state); } #endif diff --git a/arch/arm64/kernel/cpuinfo.c b/arch/arm64/kernel/cpuinfo.c index 0593665fc7b4..05933c065732 100644 --- a/arch/arm64/kernel/cpuinfo.c +++ b/arch/arm64/kernel/cpuinfo.c @@ -33,7 +33,7 @@ DEFINE_PER_CPU(struct cpuinfo_arm64, cpu_data); static struct cpuinfo_arm64 boot_cpu_data; -static char *icache_policy_str[] = { +static const char *icache_policy_str[] = { [0 ... ICACHE_POLICY_PIPT] = "RESERVED/UNKNOWN", [ICACHE_POLICY_VIPT] = "VIPT", [ICACHE_POLICY_PIPT] = "PIPT", @@ -82,6 +82,8 @@ static const char *const hwcap_str[] = { "svebitperm", "svesha3", "svesm4", + "flagm2", + "frint", NULL }; diff --git a/arch/arm64/kernel/debug-monitors.c b/arch/arm64/kernel/debug-monitors.c index f8719bd30850..48222a4760c2 100644 --- a/arch/arm64/kernel/debug-monitors.c +++ b/arch/arm64/kernel/debug-monitors.c @@ -207,16 +207,16 @@ static int call_step_hook(struct pt_regs *regs, unsigned int esr) list = user_mode(regs) ? &user_step_hook : &kernel_step_hook; - rcu_read_lock(); - + /* + * Since single-step exception disables interrupt, this function is + * entirely not preemptible, and we can use rcu list safely here. + */ list_for_each_entry_rcu(hook, list, node) { retval = hook->fn(regs, esr); if (retval == DBG_HOOK_HANDLED) break; } - rcu_read_unlock(); - return retval; } NOKPROBE_SYMBOL(call_step_hook); @@ -305,14 +305,16 @@ static int call_break_hook(struct pt_regs *regs, unsigned int esr) list = user_mode(regs) ? &user_break_hook : &kernel_break_hook; - rcu_read_lock(); + /* + * Since brk exception disables interrupt, this function is + * entirely not preemptible, and we can use rcu list safely here. + */ list_for_each_entry_rcu(hook, list, node) { unsigned int comment = esr & ESR_ELx_BRK64_ISS_COMMENT_MASK; if ((comment & ~hook->mask) == hook->imm) fn = hook->fn; } - rcu_read_unlock(); return fn ? fn(regs, esr) : DBG_HOOK_ERROR; } diff --git a/arch/arm64/kernel/efi.c b/arch/arm64/kernel/efi.c index 3c33d0dd8e0e..d0cf596db82c 100644 --- a/arch/arm64/kernel/efi.c +++ b/arch/arm64/kernel/efi.c @@ -82,8 +82,7 @@ int __init efi_create_mapping(struct mm_struct *mm, efi_memory_desc_t *md) return 0; } -static int __init set_permissions(pte_t *ptep, pgtable_t token, - unsigned long addr, void *data) +static int __init set_permissions(pte_t *ptep, unsigned long addr, void *data) { efi_memory_desc_t *md = data; pte_t pte = READ_ONCE(*ptep); diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S index 2df8d0a1d980..84a822748c84 100644 --- a/arch/arm64/kernel/entry.S +++ b/arch/arm64/kernel/entry.S @@ -30,9 +30,9 @@ * Context tracking subsystem. Used to instrument transitions * between user and kernel mode. */ - .macro ct_user_exit + .macro ct_user_exit_irqoff #ifdef CONFIG_CONTEXT_TRACKING - bl context_tracking_user_exit + bl enter_from_user_mode #endif .endm @@ -247,6 +247,7 @@ alternative_else_nop_endif /* * Registers that may be useful after this macro is invoked: * + * x20 - ICC_PMR_EL1 * x21 - aborted SP * x22 - aborted PC * x23 - aborted PSTATE @@ -424,6 +425,38 @@ tsk .req x28 // current thread_info irq_stack_exit .endm +#ifdef CONFIG_ARM64_PSEUDO_NMI + /* + * Set res to 0 if irqs were unmasked in interrupted context. + * Otherwise set res to non-0 value. + */ + .macro test_irqs_unmasked res:req, pmr:req +alternative_if ARM64_HAS_IRQ_PRIO_MASKING + sub \res, \pmr, #GIC_PRIO_IRQON +alternative_else + mov \res, xzr +alternative_endif + .endm +#endif + + .macro gic_prio_kentry_setup, tmp:req +#ifdef CONFIG_ARM64_PSEUDO_NMI + alternative_if ARM64_HAS_IRQ_PRIO_MASKING + mov \tmp, #(GIC_PRIO_PSR_I_SET | GIC_PRIO_IRQON) + msr_s SYS_ICC_PMR_EL1, \tmp + alternative_else_nop_endif +#endif + .endm + + .macro gic_prio_irq_setup, pmr:req, tmp:req +#ifdef CONFIG_ARM64_PSEUDO_NMI + alternative_if ARM64_HAS_IRQ_PRIO_MASKING + orr \tmp, \pmr, #GIC_PRIO_PSR_I_SET + msr_s SYS_ICC_PMR_EL1, \tmp + alternative_else_nop_endif +#endif + .endm + .text /* @@ -553,10 +586,8 @@ el1_sync: b.eq el1_ia cmp x24, #ESR_ELx_EC_SYS64 // configurable trap b.eq el1_undef - cmp x24, #ESR_ELx_EC_SP_ALIGN // stack alignment exception - b.eq el1_sp_pc cmp x24, #ESR_ELx_EC_PC_ALIGN // pc alignment exception - b.eq el1_sp_pc + b.eq el1_pc cmp x24, #ESR_ELx_EC_UNKNOWN // unknown exception in EL1 b.eq el1_undef cmp x24, #ESR_ELx_EC_BREAKPT_CUR // debug exception in EL1 @@ -578,9 +609,11 @@ el1_da: bl do_mem_abort kernel_exit 1 -el1_sp_pc: +el1_pc: /* - * Stack or PC alignment exception handling + * PC alignment exception handling. We don't handle SP alignment faults, + * since we will have hit a recursive exception when trying to push the + * initial pt_regs. */ mrs x0, far_el1 inherit_daif pstate=x23, tmp=x2 @@ -602,6 +635,7 @@ el1_dbg: cmp x24, #ESR_ELx_EC_BRK64 // if BRK64 cinc x24, x24, eq // set bit '0' tbz x24, #0, el1_inv // EL1 only + gic_prio_kentry_setup tmp=x3 mrs x0, far_el1 mov x2, sp // struct pt_regs bl do_debug_exception @@ -619,20 +653,18 @@ ENDPROC(el1_sync) .align 6 el1_irq: kernel_entry 1 + gic_prio_irq_setup pmr=x20, tmp=x1 enable_da_f -#ifdef CONFIG_TRACE_IRQFLAGS + #ifdef CONFIG_ARM64_PSEUDO_NMI -alternative_if ARM64_HAS_IRQ_PRIO_MASKING - ldr x20, [sp, #S_PMR_SAVE] -alternative_else - mov x20, #GIC_PRIO_IRQON -alternative_endif - cmp x20, #GIC_PRIO_IRQOFF - /* Irqs were disabled, don't trace */ - b.ls 1f + test_irqs_unmasked res=x0, pmr=x20 + cbz x0, 1f + bl asm_nmi_enter +1: #endif + +#ifdef CONFIG_TRACE_IRQFLAGS bl trace_hardirqs_off -1: #endif irq_handler @@ -651,14 +683,23 @@ alternative_else_nop_endif bl preempt_schedule_irq // irq en/disable is done inside 1: #endif -#ifdef CONFIG_TRACE_IRQFLAGS + #ifdef CONFIG_ARM64_PSEUDO_NMI /* - * if IRQs were disabled when we received the interrupt, we have an NMI - * and we are not re-enabling interrupt upon eret. Skip tracing. + * When using IRQ priority masking, we can get spurious interrupts while + * PMR is set to GIC_PRIO_IRQOFF. An NMI might also have occurred in a + * section with interrupts disabled. Skip tracing in those cases. */ - cmp x20, #GIC_PRIO_IRQOFF - b.ls 1f + test_irqs_unmasked res=x0, pmr=x20 + cbz x0, 1f + bl asm_nmi_exit +1: +#endif + +#ifdef CONFIG_TRACE_IRQFLAGS +#ifdef CONFIG_ARM64_PSEUDO_NMI + test_irqs_unmasked res=x0, pmr=x20 + cbnz x0, 1f #endif bl trace_hardirqs_on 1: @@ -691,9 +732,9 @@ el0_sync: ccmp x24, #ESR_ELx_EC_WFx, #4, ne b.eq el0_sys cmp x24, #ESR_ELx_EC_SP_ALIGN // stack alignment exception - b.eq el0_sp_pc + b.eq el0_sp cmp x24, #ESR_ELx_EC_PC_ALIGN // pc alignment exception - b.eq el0_sp_pc + b.eq el0_pc cmp x24, #ESR_ELx_EC_UNKNOWN // unknown exception in EL0 b.eq el0_undef cmp x24, #ESR_ELx_EC_BREAKPT_LOW // debug exception in EL0 @@ -717,7 +758,7 @@ el0_sync_compat: cmp x24, #ESR_ELx_EC_FP_EXC32 // FP/ASIMD exception b.eq el0_fpsimd_exc cmp x24, #ESR_ELx_EC_PC_ALIGN // pc alignment exception - b.eq el0_sp_pc + b.eq el0_pc cmp x24, #ESR_ELx_EC_UNKNOWN // unknown exception in EL0 b.eq el0_undef cmp x24, #ESR_ELx_EC_CP15_32 // CP15 MRC/MCR trap @@ -751,8 +792,8 @@ el0_cp15: /* * Trapped CP15 (MRC, MCR, MRRC, MCRR) instructions */ + ct_user_exit_irqoff enable_daif - ct_user_exit mov x0, x25 mov x1, sp bl do_cp15instr @@ -764,8 +805,8 @@ el0_da: * Data abort handling */ mrs x26, far_el1 + ct_user_exit_irqoff enable_daif - ct_user_exit clear_address_tag x0, x26 mov x1, x25 mov x2, sp @@ -776,11 +817,12 @@ el0_ia: * Instruction abort handling */ mrs x26, far_el1 + gic_prio_kentry_setup tmp=x0 + ct_user_exit_irqoff enable_da_f #ifdef CONFIG_TRACE_IRQFLAGS bl trace_hardirqs_off #endif - ct_user_exit mov x0, x26 mov x1, x25 mov x2, sp @@ -790,8 +832,8 @@ el0_fpsimd_acc: /* * Floating Point or Advanced SIMD access */ + ct_user_exit_irqoff enable_daif - ct_user_exit mov x0, x25 mov x1, sp bl do_fpsimd_acc @@ -800,8 +842,8 @@ el0_sve_acc: /* * Scalable Vector Extension access */ + ct_user_exit_irqoff enable_daif - ct_user_exit mov x0, x25 mov x1, sp bl do_sve_acc @@ -810,22 +852,27 @@ el0_fpsimd_exc: /* * Floating Point, Advanced SIMD or SVE exception */ + ct_user_exit_irqoff enable_daif - ct_user_exit mov x0, x25 mov x1, sp bl do_fpsimd_exc b ret_to_user +el0_sp: + ldr x26, [sp, #S_SP] + b el0_sp_pc +el0_pc: + mrs x26, far_el1 el0_sp_pc: /* * Stack or PC alignment exception handling */ - mrs x26, far_el1 + gic_prio_kentry_setup tmp=x0 + ct_user_exit_irqoff enable_da_f #ifdef CONFIG_TRACE_IRQFLAGS bl trace_hardirqs_off #endif - ct_user_exit mov x0, x26 mov x1, x25 mov x2, sp @@ -835,8 +882,8 @@ el0_undef: /* * Undefined instruction */ + ct_user_exit_irqoff enable_daif - ct_user_exit mov x0, sp bl do_undefinstr b ret_to_user @@ -844,8 +891,8 @@ el0_sys: /* * System instructions, for trapped cache maintenance instructions */ + ct_user_exit_irqoff enable_daif - ct_user_exit mov x0, x25 mov x1, sp bl do_sysinstr @@ -855,16 +902,18 @@ el0_dbg: * Debug exception handling */ tbnz x24, #0, el0_inv // EL0 only - mrs x0, far_el1 + mrs x24, far_el1 + gic_prio_kentry_setup tmp=x3 + ct_user_exit_irqoff + mov x0, x24 mov x1, x25 mov x2, sp bl do_debug_exception - enable_daif - ct_user_exit + enable_da_f b ret_to_user el0_inv: + ct_user_exit_irqoff enable_daif - ct_user_exit mov x0, sp mov x1, #BAD_SYNC mov x2, x25 @@ -876,12 +925,14 @@ ENDPROC(el0_sync) el0_irq: kernel_entry 0 el0_irq_naked: + gic_prio_irq_setup pmr=x20, tmp=x0 + ct_user_exit_irqoff enable_da_f + #ifdef CONFIG_TRACE_IRQFLAGS bl trace_hardirqs_off #endif - ct_user_exit #ifdef CONFIG_HARDEN_BRANCH_PREDICTOR tbz x22, #55, 1f bl do_el0_irq_bp_hardening @@ -898,6 +949,7 @@ ENDPROC(el0_irq) el1_error: kernel_entry 1 mrs x1, esr_el1 + gic_prio_kentry_setup tmp=x2 enable_dbg mov x0, sp bl do_serror @@ -907,12 +959,14 @@ ENDPROC(el1_error) el0_error: kernel_entry 0 el0_error_naked: - mrs x1, esr_el1 + mrs x25, esr_el1 + gic_prio_kentry_setup tmp=x2 + ct_user_exit_irqoff enable_dbg mov x0, sp + mov x1, x25 bl do_serror - enable_daif - ct_user_exit + enable_da_f b ret_to_user ENDPROC(el0_error) @@ -932,6 +986,7 @@ work_pending: */ ret_to_user: disable_daif + gic_prio_kentry_setup tmp=x3 ldr x1, [tsk, #TSK_TI_FLAGS] and x2, x1, #_TIF_WORK_MASK cbnz x2, work_pending @@ -948,6 +1003,7 @@ ENDPROC(ret_to_user) */ .align 6 el0_svc: + gic_prio_kentry_setup tmp=x1 mov x0, sp bl el0_svc_handler b ret_to_user diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c index 0cfcf5c237c5..37d3912cfe06 100644 --- a/arch/arm64/kernel/fpsimd.c +++ b/arch/arm64/kernel/fpsimd.c @@ -82,7 +82,8 @@ * To prevent this from racing with the manipulation of the task's FPSIMD state * from task context and thereby corrupting the state, it is necessary to * protect any manipulation of a task's fpsimd_state or TIF_FOREIGN_FPSTATE - * flag with local_bh_disable() unless softirqs are already masked. + * flag with {, __}get_cpu_fpsimd_context(). This will still allow softirqs to + * run but prevent them to use FPSIMD. * * For a certain task, the sequence may look something like this: * - the task gets scheduled in; if both the task's fpsimd_cpu field @@ -145,6 +146,56 @@ extern void __percpu *efi_sve_state; #endif /* ! CONFIG_ARM64_SVE */ +DEFINE_PER_CPU(bool, fpsimd_context_busy); +EXPORT_PER_CPU_SYMBOL(fpsimd_context_busy); + +static void __get_cpu_fpsimd_context(void) +{ + bool busy = __this_cpu_xchg(fpsimd_context_busy, true); + + WARN_ON(busy); +} + +/* + * Claim ownership of the CPU FPSIMD context for use by the calling context. + * + * The caller may freely manipulate the FPSIMD context metadata until + * put_cpu_fpsimd_context() is called. + * + * The double-underscore version must only be called if you know the task + * can't be preempted. + */ +static void get_cpu_fpsimd_context(void) +{ + preempt_disable(); + __get_cpu_fpsimd_context(); +} + +static void __put_cpu_fpsimd_context(void) +{ + bool busy = __this_cpu_xchg(fpsimd_context_busy, false); + + WARN_ON(!busy); /* No matching get_cpu_fpsimd_context()? */ +} + +/* + * Release the CPU FPSIMD context. + * + * Must be called from a context in which get_cpu_fpsimd_context() was + * previously called, with no call to put_cpu_fpsimd_context() in the + * meantime. + */ +static void put_cpu_fpsimd_context(void) +{ + __put_cpu_fpsimd_context(); + preempt_enable(); +} + +static bool have_cpu_fpsimd_context(void) +{ + return !preemptible() && __this_cpu_read(fpsimd_context_busy); +} + /* * Call __sve_free() directly only if you know task can't be scheduled * or preempted. @@ -215,12 +266,10 @@ static void sve_free(struct task_struct *task) * This function should be called only when the FPSIMD/SVE state in * thread_struct is known to be up to date, when preparing to enter * userspace. - * - * Softirqs (and preemption) must be disabled. */ static void task_fpsimd_load(void) { - WARN_ON(!in_softirq() && !irqs_disabled()); + WARN_ON(!have_cpu_fpsimd_context()); if (system_supports_sve() && test_thread_flag(TIF_SVE)) sve_load_state(sve_pffr(¤t->thread), @@ -233,16 +282,14 @@ static void task_fpsimd_load(void) /* * Ensure FPSIMD/SVE storage in memory for the loaded context is up to * date with respect to the CPU registers. - * - * Softirqs (and preemption) must be disabled. */ -void fpsimd_save(void) +static void fpsimd_save(void) { struct fpsimd_last_state_struct const *last = this_cpu_ptr(&fpsimd_last_state); /* set by fpsimd_bind_task_to_cpu() or fpsimd_bind_state_to_cpu() */ - WARN_ON(!in_softirq() && !irqs_disabled()); + WARN_ON(!have_cpu_fpsimd_context()); if (!test_thread_flag(TIF_FOREIGN_FPSTATE)) { if (system_supports_sve() && test_thread_flag(TIF_SVE)) { @@ -359,12 +406,25 @@ static __uint128_t arm64_cpu_to_le128(__uint128_t x) #define arm64_le128_to_cpu(x) arm64_cpu_to_le128(x) +static void __fpsimd_to_sve(void *sst, struct user_fpsimd_state const *fst, + unsigned int vq) +{ + unsigned int i; + __uint128_t *p; + + for (i = 0; i < SVE_NUM_ZREGS; ++i) { + p = (__uint128_t *)ZREG(sst, vq, i); + *p = arm64_cpu_to_le128(fst->vregs[i]); + } +} + /* * Transfer the FPSIMD state in task->thread.uw.fpsimd_state to * task->thread.sve_state. * * Task can be a non-runnable task, or current. In the latter case, - * softirqs (and preemption) must be disabled. + * the caller must have ownership of the cpu FPSIMD context before calling + * this function. * task->thread.sve_state must point to at least sve_state_size(task) * bytes of allocated kernel memory. * task->thread.uw.fpsimd_state must be up to date before calling this @@ -375,17 +435,12 @@ static void fpsimd_to_sve(struct task_struct *task) unsigned int vq; void *sst = task->thread.sve_state; struct user_fpsimd_state const *fst = &task->thread.uw.fpsimd_state; - unsigned int i; - __uint128_t *p; if (!system_supports_sve()) return; vq = sve_vq_from_vl(task->thread.sve_vl); - for (i = 0; i < 32; ++i) { - p = (__uint128_t *)ZREG(sst, vq, i); - *p = arm64_cpu_to_le128(fst->vregs[i]); - } + __fpsimd_to_sve(sst, fst, vq); } /* @@ -393,7 +448,8 @@ static void fpsimd_to_sve(struct task_struct *task) * task->thread.uw.fpsimd_state. * * Task can be a non-runnable task, or current. In the latter case, - * softirqs (and preemption) must be disabled. + * the caller must have ownership of the cpu FPSIMD context before calling + * this function. * task->thread.sve_state must point to at least sve_state_size(task) * bytes of allocated kernel memory. * task->thread.sve_state must be up to date before calling this function. @@ -410,7 +466,7 @@ static void sve_to_fpsimd(struct task_struct *task) return; vq = sve_vq_from_vl(task->thread.sve_vl); - for (i = 0; i < 32; ++i) { + for (i = 0; i < SVE_NUM_ZREGS; ++i) { p = (__uint128_t const *)ZREG(sst, vq, i); fst->vregs[i] = arm64_le128_to_cpu(*p); } @@ -501,8 +557,6 @@ void sve_sync_from_fpsimd_zeropad(struct task_struct *task) unsigned int vq; void *sst = task->thread.sve_state; struct user_fpsimd_state const *fst = &task->thread.uw.fpsimd_state; - unsigned int i; - __uint128_t *p; if (!test_tsk_thread_flag(task, TIF_SVE)) return; @@ -510,11 +564,7 @@ void sve_sync_from_fpsimd_zeropad(struct task_struct *task) vq = sve_vq_from_vl(task->thread.sve_vl); memset(sst, 0, SVE_SIG_REGS_SIZE(vq)); - - for (i = 0; i < 32; ++i) { - p = (__uint128_t *)ZREG(sst, vq, i); - *p = arm64_cpu_to_le128(fst->vregs[i]); - } + __fpsimd_to_sve(sst, fst, vq); } int sve_set_vector_length(struct task_struct *task, @@ -557,7 +607,7 @@ int sve_set_vector_length(struct task_struct *task, * non-SVE thread. */ if (task == current) { - local_bh_disable(); + get_cpu_fpsimd_context(); fpsimd_save(); } @@ -567,7 +617,7 @@ int sve_set_vector_length(struct task_struct *task, sve_to_fpsimd(task); if (task == current) - local_bh_enable(); + put_cpu_fpsimd_context(); /* * Force reallocation of task SVE state to the correct size @@ -880,7 +930,7 @@ asmlinkage void do_sve_acc(unsigned int esr, struct pt_regs *regs) sve_alloc(current); - local_bh_disable(); + get_cpu_fpsimd_context(); fpsimd_save(); @@ -891,7 +941,7 @@ asmlinkage void do_sve_acc(unsigned int esr, struct pt_regs *regs) if (test_and_set_thread_flag(TIF_SVE)) WARN_ON(1); /* SVE access shouldn't have trapped */ - local_bh_enable(); + put_cpu_fpsimd_context(); } /* @@ -935,6 +985,8 @@ void fpsimd_thread_switch(struct task_struct *next) if (!system_supports_fpsimd()) return; + __get_cpu_fpsimd_context(); + /* Save unsaved fpsimd state, if any: */ fpsimd_save(); @@ -949,6 +1001,8 @@ void fpsimd_thread_switch(struct task_struct *next) update_tsk_thread_flag(next, TIF_FOREIGN_FPSTATE, wrong_task || wrong_cpu); + + __put_cpu_fpsimd_context(); } void fpsimd_flush_thread(void) @@ -958,7 +1012,7 @@ void fpsimd_flush_thread(void) if (!system_supports_fpsimd()) return; - local_bh_disable(); + get_cpu_fpsimd_context(); fpsimd_flush_task_state(current); memset(¤t->thread.uw.fpsimd_state, 0, @@ -999,7 +1053,7 @@ void fpsimd_flush_thread(void) current->thread.sve_vl_onexec = 0; } - local_bh_enable(); + put_cpu_fpsimd_context(); } /* @@ -1011,9 +1065,9 @@ void fpsimd_preserve_current_state(void) if (!system_supports_fpsimd()) return; - local_bh_disable(); + get_cpu_fpsimd_context(); fpsimd_save(); - local_bh_enable(); + put_cpu_fpsimd_context(); } /* @@ -1030,7 +1084,8 @@ void fpsimd_signal_preserve_current_state(void) /* * Associate current's FPSIMD context with this cpu - * Preemption must be disabled when calling this function. + * The caller must have ownership of the cpu FPSIMD context before calling + * this function. */ void fpsimd_bind_task_to_cpu(void) { @@ -1076,14 +1131,14 @@ void fpsimd_restore_current_state(void) if (!system_supports_fpsimd()) return; - local_bh_disable(); + get_cpu_fpsimd_context(); if (test_and_clear_thread_flag(TIF_FOREIGN_FPSTATE)) { task_fpsimd_load(); fpsimd_bind_task_to_cpu(); } - local_bh_enable(); + put_cpu_fpsimd_context(); } /* @@ -1096,7 +1151,7 @@ void fpsimd_update_current_state(struct user_fpsimd_state const *state) if (!system_supports_fpsimd()) return; - local_bh_disable(); + get_cpu_fpsimd_context(); current->thread.uw.fpsimd_state = *state; if (system_supports_sve() && test_thread_flag(TIF_SVE)) @@ -1107,7 +1162,7 @@ void fpsimd_update_current_state(struct user_fpsimd_state const *state) clear_thread_flag(TIF_FOREIGN_FPSTATE); - local_bh_enable(); + put_cpu_fpsimd_context(); } /* @@ -1133,18 +1188,29 @@ void fpsimd_flush_task_state(struct task_struct *t) /* * Invalidate any task's FPSIMD state that is present on this cpu. - * This function must be called with softirqs disabled. + * The FPSIMD context should be acquired with get_cpu_fpsimd_context() + * before calling this function. */ -void fpsimd_flush_cpu_state(void) +static void fpsimd_flush_cpu_state(void) { __this_cpu_write(fpsimd_last_state.st, NULL); set_thread_flag(TIF_FOREIGN_FPSTATE); } -#ifdef CONFIG_KERNEL_MODE_NEON +/* + * Save the FPSIMD state to memory and invalidate cpu view. + * This function must be called with preemption disabled. + */ +void fpsimd_save_and_flush_cpu_state(void) +{ + WARN_ON(preemptible()); + __get_cpu_fpsimd_context(); + fpsimd_save(); + fpsimd_flush_cpu_state(); + __put_cpu_fpsimd_context(); +} -DEFINE_PER_CPU(bool, kernel_neon_busy); -EXPORT_PER_CPU_SYMBOL(kernel_neon_busy); +#ifdef CONFIG_KERNEL_MODE_NEON /* * Kernel-side NEON support functions @@ -1170,19 +1236,13 @@ void kernel_neon_begin(void) BUG_ON(!may_use_simd()); - local_bh_disable(); - - __this_cpu_write(kernel_neon_busy, true); + get_cpu_fpsimd_context(); /* Save unsaved fpsimd state, if any: */ fpsimd_save(); /* Invalidate any task state remaining in the fpsimd regs: */ fpsimd_flush_cpu_state(); - - preempt_disable(); - - local_bh_enable(); } EXPORT_SYMBOL(kernel_neon_begin); @@ -1197,15 +1257,10 @@ EXPORT_SYMBOL(kernel_neon_begin); */ void kernel_neon_end(void) { - bool busy; - if (!system_supports_fpsimd()) return; - busy = __this_cpu_xchg(kernel_neon_busy, false); - WARN_ON(!busy); /* No matching kernel_neon_begin()? */ - - preempt_enable(); + put_cpu_fpsimd_context(); } EXPORT_SYMBOL(kernel_neon_end); @@ -1297,8 +1352,7 @@ static int fpsimd_cpu_pm_notifier(struct notifier_block *self, { switch (cmd) { case CPU_PM_ENTER: - fpsimd_save(); - fpsimd_flush_cpu_state(); + fpsimd_save_and_flush_cpu_state(); break; case CPU_PM_EXIT: break; diff --git a/arch/arm64/kernel/ftrace.c b/arch/arm64/kernel/ftrace.c index 1285c7b2947f..171773257974 100644 --- a/arch/arm64/kernel/ftrace.c +++ b/arch/arm64/kernel/ftrace.c @@ -73,7 +73,7 @@ int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) if (offset < -SZ_128M || offset >= SZ_128M) { #ifdef CONFIG_ARM64_MODULE_PLTS - struct plt_entry trampoline; + struct plt_entry trampoline, *dst; struct module *mod; /* @@ -106,23 +106,27 @@ int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) * to check if the actual opcodes are in fact identical, * regardless of the offset in memory so use memcmp() instead. */ - trampoline = get_plt_entry(addr, mod->arch.ftrace_trampoline); - if (memcmp(mod->arch.ftrace_trampoline, &trampoline, - sizeof(trampoline))) { - if (plt_entry_is_initialized(mod->arch.ftrace_trampoline)) { + dst = mod->arch.ftrace_trampoline; + trampoline = get_plt_entry(addr, dst); + if (memcmp(dst, &trampoline, sizeof(trampoline))) { + if (plt_entry_is_initialized(dst)) { pr_err("ftrace: far branches to multiple entry points unsupported inside a single module\n"); return -EINVAL; } /* point the trampoline to our ftrace entry point */ module_disable_ro(mod); - *mod->arch.ftrace_trampoline = trampoline; + *dst = trampoline; module_enable_ro(mod, true); - /* update trampoline before patching in the branch */ - smp_wmb(); + /* + * Ensure updated trampoline is visible to instruction + * fetch before we patch in the branch. + */ + __flush_icache_range((unsigned long)&dst[0], + (unsigned long)&dst[1]); } - addr = (unsigned long)(void *)mod->arch.ftrace_trampoline; + addr = (unsigned long)dst; #else /* CONFIG_ARM64_MODULE_PLTS */ return -EINVAL; #endif /* CONFIG_ARM64_MODULE_PLTS */ diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S index 2cdacd1c141b..989b1944cb71 100644 --- a/arch/arm64/kernel/head.S +++ b/arch/arm64/kernel/head.S @@ -102,6 +102,8 @@ pe_header: * x23 stext() .. start_kernel() physical misalignment/KASLR offset * x28 __create_page_tables() callee preserved temp register * x19/x20 __primary_switch() callee preserved temp registers + * x24 __primary_switch() .. relocate_kernel() + * current RELR displacement */ ENTRY(stext) bl preserve_boot_args @@ -308,15 +310,15 @@ __create_page_tables: adrp x0, idmap_pg_dir adrp x3, __idmap_text_start // __pa(__idmap_text_start) -#ifdef CONFIG_ARM64_USER_VA_BITS_52 +#ifdef CONFIG_ARM64_VA_BITS_52 mrs_s x6, SYS_ID_AA64MMFR2_EL1 and x6, x6, #(0xf << ID_AA64MMFR2_LVA_SHIFT) mov x5, #52 cbnz x6, 1f #endif - mov x5, #VA_BITS + mov x5, #VA_BITS_MIN 1: - adr_l x6, vabits_user + adr_l x6, vabits_actual str x5, [x6] dmb sy dc ivac, x6 // Invalidate potentially stale cache line @@ -724,14 +726,22 @@ __secondary_switched: adr_l x0, secondary_data ldr x1, [x0, #CPU_BOOT_STACK] // get secondary_data.stack + cbz x1, __secondary_too_slow mov sp, x1 ldr x2, [x0, #CPU_BOOT_TASK] + cbz x2, __secondary_too_slow msr sp_el0, x2 mov x29, #0 mov x30, #0 b secondary_start_kernel ENDPROC(__secondary_switched) +__secondary_too_slow: + wfe + wfi + b __secondary_too_slow +ENDPROC(__secondary_too_slow) + /* * The booting CPU updates the failed status @__early_cpu_boot_status, * with MMU turned off. @@ -772,7 +782,7 @@ ENTRY(__enable_mmu) phys_to_ttbr x1, x1 phys_to_ttbr x2, x2 msr ttbr0_el1, x2 // load TTBR0 - offset_ttbr1 x1 + offset_ttbr1 x1, x3 msr ttbr1_el1, x1 // load TTBR1 isb msr sctlr_el1, x0 @@ -789,8 +799,8 @@ ENTRY(__enable_mmu) ENDPROC(__enable_mmu) ENTRY(__cpu_secondary_check52bitva) -#ifdef CONFIG_ARM64_USER_VA_BITS_52 - ldr_l x0, vabits_user +#ifdef CONFIG_ARM64_VA_BITS_52 + ldr_l x0, vabits_actual cmp x0, #52 b.ne 2f @@ -834,14 +844,93 @@ __relocate_kernel: 0: cmp x9, x10 b.hs 1f - ldp x11, x12, [x9], #24 - ldr x13, [x9, #-8] - cmp w12, #R_AARCH64_RELATIVE + ldp x12, x13, [x9], #24 + ldr x14, [x9, #-8] + cmp w13, #R_AARCH64_RELATIVE b.ne 0b - add x13, x13, x23 // relocate - str x13, [x11, x23] + add x14, x14, x23 // relocate + str x14, [x12, x23] b 0b -1: ret + +1: +#ifdef CONFIG_RELR + /* + * Apply RELR relocations. + * + * RELR is a compressed format for storing relative relocations. The + * encoded sequence of entries looks like: + * [ AAAAAAAA BBBBBBB1 BBBBBBB1 ... AAAAAAAA BBBBBB1 ... ] + * + * i.e. start with an address, followed by any number of bitmaps. The + * address entry encodes 1 relocation. The subsequent bitmap entries + * encode up to 63 relocations each, at subsequent offsets following + * the last address entry. + * + * The bitmap entries must have 1 in the least significant bit. The + * assumption here is that an address cannot have 1 in lsb. Odd + * addresses are not supported. Any odd addresses are stored in the RELA + * section, which is handled above. + * + * Excluding the least significant bit in the bitmap, each non-zero + * bit in the bitmap represents a relocation to be applied to + * a corresponding machine word that follows the base address + * word. The second least significant bit represents the machine + * word immediately following the initial address, and each bit + * that follows represents the next word, in linear order. As such, + * a single bitmap can encode up to 63 relocations in a 64-bit object. + * + * In this implementation we store the address of the next RELR table + * entry in x9, the address being relocated by the current address or + * bitmap entry in x13 and the address being relocated by the current + * bit in x14. + * + * Because addends are stored in place in the binary, RELR relocations + * cannot be applied idempotently. We use x24 to keep track of the + * currently applied displacement so that we can correctly relocate if + * __relocate_kernel is called twice with non-zero displacements (i.e. + * if there is both a physical misalignment and a KASLR displacement). + */ + ldr w9, =__relr_offset // offset to reloc table + ldr w10, =__relr_size // size of reloc table + add x9, x9, x11 // __va(.relr) + add x10, x9, x10 // __va(.relr) + sizeof(.relr) + + sub x15, x23, x24 // delta from previous offset + cbz x15, 7f // nothing to do if unchanged + mov x24, x23 // save new offset + +2: cmp x9, x10 + b.hs 7f + ldr x11, [x9], #8 + tbnz x11, #0, 3f // branch to handle bitmaps + add x13, x11, x23 + ldr x12, [x13] // relocate address entry + add x12, x12, x15 + str x12, [x13], #8 // adjust to start of bitmap + b 2b + +3: mov x14, x13 +4: lsr x11, x11, #1 + cbz x11, 6f + tbz x11, #0, 5f // skip bit if not set + ldr x12, [x14] // relocate bit + add x12, x12, x15 + str x12, [x14] + +5: add x14, x14, #8 // move to next bit's address + b 4b + +6: /* + * Move to the next bitmap's address. 8 is the word size, and 63 is the + * number of significant bits in a bitmap entry. + */ + add x13, x13, #(8 * 63) + b 2b + +7: +#endif + ret + ENDPROC(__relocate_kernel) #endif @@ -854,6 +943,9 @@ __primary_switch: adrp x1, init_pg_dir bl __enable_mmu #ifdef CONFIG_RELOCATABLE +#ifdef CONFIG_RELR + mov x24, #0 // no RELR displacement yet +#endif bl __relocate_kernel #ifdef CONFIG_RANDOMIZE_BASE ldr x8, =__primary_switched diff --git a/arch/arm64/kernel/hibernate-asm.S b/arch/arm64/kernel/hibernate-asm.S index 2f4a2ce7264b..38bcd4d4e43b 100644 --- a/arch/arm64/kernel/hibernate-asm.S +++ b/arch/arm64/kernel/hibernate-asm.S @@ -22,14 +22,14 @@ * Even switching to our copied tables will cause a changed output address at * each stage of the walk. */ -.macro break_before_make_ttbr_switch zero_page, page_table, tmp +.macro break_before_make_ttbr_switch zero_page, page_table, tmp, tmp2 phys_to_ttbr \tmp, \zero_page msr ttbr1_el1, \tmp isb tlbi vmalle1 dsb nsh phys_to_ttbr \tmp, \page_table - offset_ttbr1 \tmp + offset_ttbr1 \tmp, \tmp2 msr ttbr1_el1, \tmp isb .endm @@ -70,7 +70,7 @@ ENTRY(swsusp_arch_suspend_exit) * We execute from ttbr0, change ttbr1 to our copied linear map tables * with a break-before-make via the zero page */ - break_before_make_ttbr_switch x5, x0, x6 + break_before_make_ttbr_switch x5, x0, x6, x8 mov x21, x1 mov x30, x2 @@ -101,7 +101,7 @@ ENTRY(swsusp_arch_suspend_exit) dsb ish /* wait for PoU cleaning to finish */ /* switch to the restored kernels page tables */ - break_before_make_ttbr_switch x25, x21, x6 + break_before_make_ttbr_switch x25, x21, x6, x8 ic ialluis dsb ish diff --git a/arch/arm64/kernel/hibernate.c b/arch/arm64/kernel/hibernate.c index 9341fcc6e809..e0a7fce0e01c 100644 --- a/arch/arm64/kernel/hibernate.c +++ b/arch/arm64/kernel/hibernate.c @@ -496,7 +496,7 @@ int swsusp_arch_resume(void) rc = -ENOMEM; goto out; } - rc = copy_page_tables(tmp_pg_dir, PAGE_OFFSET, 0); + rc = copy_page_tables(tmp_pg_dir, PAGE_OFFSET, PAGE_END); if (rc) goto out; diff --git a/arch/arm64/kernel/hw_breakpoint.c b/arch/arm64/kernel/hw_breakpoint.c index dceb84520948..38ee1514cd9c 100644 --- a/arch/arm64/kernel/hw_breakpoint.c +++ b/arch/arm64/kernel/hw_breakpoint.c @@ -536,13 +536,18 @@ int hw_breakpoint_arch_parse(struct perf_event *bp, /* Aligned */ break; case 1: - /* Allow single byte watchpoint. */ - if (hw->ctrl.len == ARM_BREAKPOINT_LEN_1) - break; case 2: /* Allow halfword watchpoints and breakpoints. */ if (hw->ctrl.len == ARM_BREAKPOINT_LEN_2) break; + + /* Fallthrough */ + case 3: + /* Allow single byte watchpoint. */ + if (hw->ctrl.len == ARM_BREAKPOINT_LEN_1) + break; + + /* Fallthrough */ default: return -EINVAL; } diff --git a/arch/arm64/kernel/image-vars.h b/arch/arm64/kernel/image-vars.h new file mode 100644 index 000000000000..25a2a9b479c2 --- /dev/null +++ b/arch/arm64/kernel/image-vars.h @@ -0,0 +1,51 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Linker script variables to be set after section resolution, as + * ld.lld does not like variables assigned before SECTIONS is processed. + */ +#ifndef __ARM64_KERNEL_IMAGE_VARS_H +#define __ARM64_KERNEL_IMAGE_VARS_H + +#ifndef LINKER_SCRIPT +#error This file should only be included in vmlinux.lds.S +#endif + +#ifdef CONFIG_EFI + +__efistub_stext_offset = stext - _text; + +/* + * The EFI stub has its own symbol namespace prefixed by __efistub_, to + * isolate it from the kernel proper. The following symbols are legally + * accessed by the stub, so provide some aliases to make them accessible. + * Only include data symbols here, or text symbols of functions that are + * guaranteed to be safe when executed at another offset than they were + * linked at. The routines below are all implemented in assembler in a + * position independent manner + */ +__efistub_memcmp = __pi_memcmp; +__efistub_memchr = __pi_memchr; +__efistub_memcpy = __pi_memcpy; +__efistub_memmove = __pi_memmove; +__efistub_memset = __pi_memset; +__efistub_strlen = __pi_strlen; +__efistub_strnlen = __pi_strnlen; +__efistub_strcmp = __pi_strcmp; +__efistub_strncmp = __pi_strncmp; +__efistub_strrchr = __pi_strrchr; +__efistub___flush_dcache_area = __pi___flush_dcache_area; + +#ifdef CONFIG_KASAN +__efistub___memcpy = __pi_memcpy; +__efistub___memmove = __pi_memmove; +__efistub___memset = __pi_memset; +#endif + +__efistub__text = _text; +__efistub__end = _end; +__efistub__edata = _edata; +__efistub_screen_info = screen_info; + +#endif + +#endif /* __ARM64_KERNEL_IMAGE_VARS_H */ diff --git a/arch/arm64/kernel/image.h b/arch/arm64/kernel/image.h index 2b85c0d6fa3d..c7d38c660372 100644 --- a/arch/arm64/kernel/image.h +++ b/arch/arm64/kernel/image.h @@ -65,46 +65,4 @@ DEFINE_IMAGE_LE64(_kernel_offset_le, TEXT_OFFSET); \ DEFINE_IMAGE_LE64(_kernel_flags_le, __HEAD_FLAGS); -#ifdef CONFIG_EFI - -/* - * Use ABSOLUTE() to avoid ld.lld treating this as a relative symbol: - * https://github.com/ClangBuiltLinux/linux/issues/561 - */ -__efistub_stext_offset = ABSOLUTE(stext - _text); - -/* - * The EFI stub has its own symbol namespace prefixed by __efistub_, to - * isolate it from the kernel proper. The following symbols are legally - * accessed by the stub, so provide some aliases to make them accessible. - * Only include data symbols here, or text symbols of functions that are - * guaranteed to be safe when executed at another offset than they were - * linked at. The routines below are all implemented in assembler in a - * position independent manner - */ -__efistub_memcmp = __pi_memcmp; -__efistub_memchr = __pi_memchr; -__efistub_memcpy = __pi_memcpy; -__efistub_memmove = __pi_memmove; -__efistub_memset = __pi_memset; -__efistub_strlen = __pi_strlen; -__efistub_strnlen = __pi_strnlen; -__efistub_strcmp = __pi_strcmp; -__efistub_strncmp = __pi_strncmp; -__efistub_strrchr = __pi_strrchr; -__efistub___flush_dcache_area = __pi___flush_dcache_area; - -#ifdef CONFIG_KASAN -__efistub___memcpy = __pi_memcpy; -__efistub___memmove = __pi_memmove; -__efistub___memset = __pi_memset; -#endif - -__efistub__text = _text; -__efistub__end = _end; -__efistub__edata = _edata; -__efistub_screen_info = screen_info; - -#endif - #endif /* __ARM64_KERNEL_IMAGE_H */ diff --git a/arch/arm64/kernel/insn.c b/arch/arm64/kernel/insn.c index 84b059ed04fc..d801a7094076 100644 --- a/arch/arm64/kernel/insn.c +++ b/arch/arm64/kernel/insn.c @@ -26,7 +26,7 @@ #define AARCH64_INSN_N_BIT BIT(22) #define AARCH64_INSN_LSL_12 BIT(22) -static int aarch64_insn_encoding_class[] = { +static const int aarch64_insn_encoding_class[] = { AARCH64_INSN_CLS_UNKNOWN, AARCH64_INSN_CLS_UNKNOWN, AARCH64_INSN_CLS_UNKNOWN, diff --git a/arch/arm64/kernel/irq.c b/arch/arm64/kernel/irq.c index c70034fbd4ce..04a327ccf84d 100644 --- a/arch/arm64/kernel/irq.c +++ b/arch/arm64/kernel/irq.c @@ -16,8 +16,10 @@ #include <linux/smp.h> #include <linux/init.h> #include <linux/irqchip.h> +#include <linux/kprobes.h> #include <linux/seq_file.h> #include <linux/vmalloc.h> +#include <asm/daifflags.h> #include <asm/vmap_stack.h> unsigned long irq_err_count; @@ -64,4 +66,28 @@ void __init init_IRQ(void) irqchip_init(); if (!handle_arch_irq) panic("No interrupt controller found."); + + if (system_uses_irq_prio_masking()) { + /* + * Now that we have a stack for our IRQ handler, set + * the PMR/PSR pair to a consistent state. + */ + WARN_ON(read_sysreg(daif) & PSR_A_BIT); + local_daif_restore(DAIF_PROCCTX_NOIRQ); + } +} + +/* + * Stubs to make nmi_enter/exit() code callable from ASM + */ +asmlinkage void notrace asm_nmi_enter(void) +{ + nmi_enter(); +} +NOKPROBE_SYMBOL(asm_nmi_enter); + +asmlinkage void notrace asm_nmi_exit(void) +{ + nmi_exit(); } +NOKPROBE_SYMBOL(asm_nmi_exit); diff --git a/arch/arm64/kernel/kaslr.c b/arch/arm64/kernel/kaslr.c index 708051655ad9..416f537bf614 100644 --- a/arch/arm64/kernel/kaslr.c +++ b/arch/arm64/kernel/kaslr.c @@ -62,9 +62,6 @@ out: return default_cmdline; } -extern void *__init __fixmap_remap_fdt(phys_addr_t dt_phys, int *size, - pgprot_t prot); - /* * This routine will be executed with the kernel mapped at its default virtual * address, and if it returns successfully, the kernel will be remapped, and @@ -93,7 +90,7 @@ u64 __init kaslr_early_init(u64 dt_phys) * attempt at mapping the FDT in setup_machine() */ early_fixmap_init(); - fdt = __fixmap_remap_fdt(dt_phys, &size, PAGE_KERNEL); + fdt = fixmap_remap_fdt(dt_phys, &size, PAGE_KERNEL); if (!fdt) return 0; @@ -116,15 +113,15 @@ u64 __init kaslr_early_init(u64 dt_phys) /* * OK, so we are proceeding with KASLR enabled. Calculate a suitable * kernel image offset from the seed. Let's place the kernel in the - * middle half of the VMALLOC area (VA_BITS - 2), and stay clear of + * middle half of the VMALLOC area (VA_BITS_MIN - 2), and stay clear of * the lower and upper quarters to avoid colliding with other * allocations. * Even if we could randomize at page granularity for 16k and 64k pages, * let's always round to 2 MB so we don't interfere with the ability to * map using contiguous PTEs */ - mask = ((1UL << (VA_BITS - 2)) - 1) & ~(SZ_2M - 1); - offset = BIT(VA_BITS - 3) + (seed & mask); + mask = ((1UL << (VA_BITS_MIN - 2)) - 1) & ~(SZ_2M - 1); + offset = BIT(VA_BITS_MIN - 3) + (seed & mask); /* use the top 16 bits to randomize the linear region */ memstart_offset_seed = seed >> 48; diff --git a/arch/arm64/kernel/kexec_image.c b/arch/arm64/kernel/kexec_image.c index 07bf740bea91..29a9428486a5 100644 --- a/arch/arm64/kernel/kexec_image.c +++ b/arch/arm64/kernel/kexec_image.c @@ -53,7 +53,7 @@ static void *image_load(struct kimage *image, /* * We require a kernel with an unambiguous Image header. Per - * Documentation/booting.txt, this is the case when image_size + * Documentation/arm64/booting.rst, this is the case when image_size * is non-zero (practically speaking, since v3.17). */ h = (struct arm64_image_header *)kernel; @@ -84,7 +84,7 @@ static void *image_load(struct kimage *image, kbuf.buffer = kernel; kbuf.bufsz = kernel_len; - kbuf.mem = 0; + kbuf.mem = KEXEC_BUF_MEM_UNKNOWN; kbuf.memsz = le64_to_cpu(h->image_size); text_offset = le64_to_cpu(h->text_offset); kbuf.buf_align = MIN_KIMG_ALIGN; diff --git a/arch/arm64/kernel/kuser32.S b/arch/arm64/kernel/kuser32.S index 49825e9e421e..42bd8c0c60e0 100644 --- a/arch/arm64/kernel/kuser32.S +++ b/arch/arm64/kernel/kuser32.S @@ -10,7 +10,7 @@ * aarch32_setup_additional_pages() and are provided for compatibility * reasons with 32 bit (aarch32) applications that need them. * - * See Documentation/arm/kernel_user_helpers.txt for formal definitions. + * See Documentation/arm/kernel_user_helpers.rst for formal definitions. */ #include <asm/unistd.h> diff --git a/arch/arm64/kernel/machine_kexec_file.c b/arch/arm64/kernel/machine_kexec_file.c index 58871333737a..7b08bf9499b6 100644 --- a/arch/arm64/kernel/machine_kexec_file.c +++ b/arch/arm64/kernel/machine_kexec_file.c @@ -27,6 +27,8 @@ #define FDT_PROP_INITRD_END "linux,initrd-end" #define FDT_PROP_BOOTARGS "bootargs" #define FDT_PROP_KASLR_SEED "kaslr-seed" +#define FDT_PROP_RNG_SEED "rng-seed" +#define RNG_SEED_SIZE 128 const struct kexec_file_ops * const kexec_file_loaders[] = { &kexec_image_ops, @@ -102,6 +104,19 @@ static int setup_dtb(struct kimage *image, FDT_PROP_KASLR_SEED); } + /* add rng-seed */ + if (rng_is_initialized()) { + u8 rng_seed[RNG_SEED_SIZE]; + get_random_bytes(rng_seed, RNG_SEED_SIZE); + ret = fdt_setprop(dtb, off, FDT_PROP_RNG_SEED, rng_seed, + RNG_SEED_SIZE); + if (ret) + goto out; + } else { + pr_notice("RNG is not initialised: omitting \"%s\" property\n", + FDT_PROP_RNG_SEED); + } + out: if (ret) return (ret == -FDT_ERR_NOSPACE) ? -ENOMEM : -EINVAL; @@ -110,7 +125,8 @@ out: } /* - * More space needed so that we can add initrd, bootargs and kaslr-seed. + * More space needed so that we can add initrd, bootargs, kaslr-seed, and + * rng-seed. */ #define DTB_EXTRA_SPACE 0x1000 @@ -177,7 +193,7 @@ int load_other_segments(struct kimage *image, if (initrd) { kbuf.buffer = initrd; kbuf.bufsz = initrd_len; - kbuf.mem = 0; + kbuf.mem = KEXEC_BUF_MEM_UNKNOWN; kbuf.memsz = initrd_len; kbuf.buf_align = 0; /* within 1GB-aligned window of up to 32GB in size */ @@ -204,7 +220,7 @@ int load_other_segments(struct kimage *image, dtb_len = fdt_totalsize(dtb); kbuf.buffer = dtb; kbuf.bufsz = dtb_len; - kbuf.mem = 0; + kbuf.mem = KEXEC_BUF_MEM_UNKNOWN; kbuf.memsz = dtb_len; /* not across 2MB boundary */ kbuf.buf_align = SZ_2M; diff --git a/arch/arm64/kernel/module-plts.c b/arch/arm64/kernel/module-plts.c index 044c0ae4d6c8..b182442b87a3 100644 --- a/arch/arm64/kernel/module-plts.c +++ b/arch/arm64/kernel/module-plts.c @@ -302,7 +302,7 @@ int module_frob_arch_sections(Elf_Ehdr *ehdr, Elf_Shdr *sechdrs, /* sort by type, symbol index and addend */ sort(rels, numrels, sizeof(Elf64_Rela), cmp_rela, NULL); - if (strncmp(secstrings + dstsec->sh_name, ".init", 5) != 0) + if (!str_has_prefix(secstrings + dstsec->sh_name, ".init")) core_plts += count_plts(syms, rels, numrels, sechdrs[i].sh_info, dstsec); else diff --git a/arch/arm64/kernel/module.c b/arch/arm64/kernel/module.c index 71530e080ecc..03ff15bffbb6 100644 --- a/arch/arm64/kernel/module.c +++ b/arch/arm64/kernel/module.c @@ -34,7 +34,7 @@ void *module_alloc(unsigned long size) module_alloc_end = MODULES_END; p = __vmalloc_node_range(size, MODULE_ALIGN, module_alloc_base, - module_alloc_end, gfp_mask, PAGE_KERNEL_EXEC, 0, + module_alloc_end, gfp_mask, PAGE_KERNEL, 0, NUMA_NO_NODE, __builtin_return_address(0)); if (!p && IS_ENABLED(CONFIG_ARM64_MODULE_PLTS) && @@ -50,7 +50,7 @@ void *module_alloc(unsigned long size) */ p = __vmalloc_node_range(size, MODULE_ALIGN, module_alloc_base, module_alloc_base + SZ_2G, GFP_KERNEL, - PAGE_KERNEL_EXEC, 0, NUMA_NO_NODE, + PAGE_KERNEL, 0, NUMA_NO_NODE, __builtin_return_address(0)); if (p && (kasan_module_alloc(p, size) < 0)) { @@ -314,18 +314,21 @@ int apply_relocate_add(Elf64_Shdr *sechdrs, /* MOVW instruction relocations. */ case R_AARCH64_MOVW_UABS_G0_NC: overflow_check = false; + /* Fall through */ case R_AARCH64_MOVW_UABS_G0: ovf = reloc_insn_movw(RELOC_OP_ABS, loc, val, 0, AARCH64_INSN_IMM_MOVKZ); break; case R_AARCH64_MOVW_UABS_G1_NC: overflow_check = false; + /* Fall through */ case R_AARCH64_MOVW_UABS_G1: ovf = reloc_insn_movw(RELOC_OP_ABS, loc, val, 16, AARCH64_INSN_IMM_MOVKZ); break; case R_AARCH64_MOVW_UABS_G2_NC: overflow_check = false; + /* Fall through */ case R_AARCH64_MOVW_UABS_G2: ovf = reloc_insn_movw(RELOC_OP_ABS, loc, val, 32, AARCH64_INSN_IMM_MOVKZ); @@ -393,6 +396,7 @@ int apply_relocate_add(Elf64_Shdr *sechdrs, break; case R_AARCH64_ADR_PREL_PG_HI21_NC: overflow_check = false; + /* Fall through */ case R_AARCH64_ADR_PREL_PG_HI21: ovf = reloc_insn_adrp(me, sechdrs, loc, val); if (ovf && ovf != -ERANGE) diff --git a/arch/arm64/kernel/pci.c b/arch/arm64/kernel/pci.c index 575bd5517d21..570988c7a7ff 100644 --- a/arch/arm64/kernel/pci.c +++ b/arch/arm64/kernel/pci.c @@ -164,6 +164,7 @@ struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root) struct acpi_pci_generic_root_info *ri; struct pci_bus *bus, *child; struct acpi_pci_root_ops *root_ops; + struct pci_host_bridge *host; ri = kzalloc(sizeof(*ri), GFP_KERNEL); if (!ri) @@ -189,8 +190,16 @@ struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root) if (!bus) return NULL; - pci_bus_size_bridges(bus); - pci_bus_assign_resources(bus); + /* If we must preserve the resource configuration, claim now */ + host = pci_find_host_bridge(bus); + if (host->preserve_config) + pci_bus_claim_resources(bus); + + /* + * Assign whatever was left unassigned. If we didn't claim above, + * this will reassign everything. + */ + pci_assign_unassigned_root_bus_resources(bus); list_for_each_entry(child, &bus->children, node) pcie_bus_configure_settings(child); diff --git a/arch/arm64/kernel/perf_callchain.c b/arch/arm64/kernel/perf_callchain.c index 9d63514b9836..b0e03e052dd1 100644 --- a/arch/arm64/kernel/perf_callchain.c +++ b/arch/arm64/kernel/perf_callchain.c @@ -154,12 +154,7 @@ void perf_callchain_kernel(struct perf_callchain_entry_ctx *entry, return; } - frame.fp = regs->regs[29]; - frame.pc = regs->pc; -#ifdef CONFIG_FUNCTION_GRAPH_TRACER - frame.graph = 0; -#endif - + start_backtrace(&frame, regs->regs[29], regs->pc); walk_stackframe(current, &frame, callchain_trace, entry); } diff --git a/arch/arm64/kernel/perf_event.c b/arch/arm64/kernel/perf_event.c index 96e90e270042..a0b4f1bca491 100644 --- a/arch/arm64/kernel/perf_event.c +++ b/arch/arm64/kernel/perf_event.c @@ -19,6 +19,7 @@ #include <linux/of.h> #include <linux/perf/arm_pmu.h> #include <linux/platform_device.h> +#include <linux/smp.h> /* ARMv8 Cortex-A53 specific event types. */ #define ARMV8_A53_PERFCTR_PREF_LINEFILL 0xC2 @@ -157,7 +158,6 @@ armv8pmu_events_sysfs_show(struct device *dev, return sprintf(page, "event=0x%03llx\n", pmu_attr->id); } -#define ARMV8_EVENT_ATTR_RESOLVE(m) #m #define ARMV8_EVENT_ATTR(name, config) \ PMU_EVENT_ATTR(name, armv8_event_attr_##name, \ config, armv8pmu_events_sysfs_show) diff --git a/arch/arm64/kernel/probes/kprobes.c b/arch/arm64/kernel/probes/kprobes.c index 88ce502c8e6f..c4452827419b 100644 --- a/arch/arm64/kernel/probes/kprobes.c +++ b/arch/arm64/kernel/probes/kprobes.c @@ -21,6 +21,7 @@ #include <asm/ptrace.h> #include <asm/cacheflush.h> #include <asm/debug-monitors.h> +#include <asm/daifflags.h> #include <asm/system_misc.h> #include <asm/insn.h> #include <linux/uaccess.h> @@ -122,8 +123,10 @@ void *alloc_insn_page(void) void *page; page = vmalloc_exec(PAGE_SIZE); - if (page) + if (page) { set_memory_ro((unsigned long)page, 1); + set_vm_flush_reset_perms(page); + } return page; } @@ -166,33 +169,6 @@ static void __kprobes set_current_kprobe(struct kprobe *p) } /* - * When PSTATE.D is set (masked), then software step exceptions can not be - * generated. - * SPSR's D bit shows the value of PSTATE.D immediately before the - * exception was taken. PSTATE.D is set while entering into any exception - * mode, however software clears it for any normal (none-debug-exception) - * mode in the exception entry. Therefore, when we are entering into kprobe - * breakpoint handler from any normal mode then SPSR.D bit is already - * cleared, however it is set when we are entering from any debug exception - * mode. - * Since we always need to generate single step exception after a kprobe - * breakpoint exception therefore we need to clear it unconditionally, when - * we become sure that the current breakpoint exception is for kprobe. - */ -static void __kprobes -spsr_set_debug_flag(struct pt_regs *regs, int mask) -{ - unsigned long spsr = regs->pstate; - - if (mask) - spsr |= PSR_D_BIT; - else - spsr &= ~PSR_D_BIT; - - regs->pstate = spsr; -} - -/* * Interrupts need to be disabled before single-step mode is set, and not * reenabled until after single-step mode ends. * Without disabling interrupt on local CPU, there is a chance of @@ -203,17 +179,17 @@ spsr_set_debug_flag(struct pt_regs *regs, int mask) static void __kprobes kprobes_save_local_irqflag(struct kprobe_ctlblk *kcb, struct pt_regs *regs) { - kcb->saved_irqflag = regs->pstate; + kcb->saved_irqflag = regs->pstate & DAIF_MASK; regs->pstate |= PSR_I_BIT; + /* Unmask PSTATE.D for enabling software step exceptions. */ + regs->pstate &= ~PSR_D_BIT; } static void __kprobes kprobes_restore_local_irqflag(struct kprobe_ctlblk *kcb, struct pt_regs *regs) { - if (kcb->saved_irqflag & PSR_I_BIT) - regs->pstate |= PSR_I_BIT; - else - regs->pstate &= ~PSR_I_BIT; + regs->pstate &= ~DAIF_MASK; + regs->pstate |= kcb->saved_irqflag; } static void __kprobes @@ -250,8 +226,6 @@ static void __kprobes setup_singlestep(struct kprobe *p, set_ss_context(kcb, slot); /* mark pending ss */ - spsr_set_debug_flag(regs, 0); - /* IRQs and single stepping do not mix well. */ kprobes_save_local_irqflag(kcb, regs); kernel_enable_single_step(regs); diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c index 9856395ccdb7..a47462def04b 100644 --- a/arch/arm64/kernel/process.c +++ b/arch/arm64/kernel/process.c @@ -19,6 +19,7 @@ #include <linux/kernel.h> #include <linux/mm.h> #include <linux/stddef.h> +#include <linux/sysctl.h> #include <linux/unistd.h> #include <linux/user.h> #include <linux/delay.h> @@ -38,6 +39,7 @@ #include <trace/events/power.h> #include <linux/percpu.h> #include <linux/thread_info.h> +#include <linux/prctl.h> #include <asm/alternative.h> #include <asm/arch_gicv3.h> @@ -83,7 +85,7 @@ static void __cpu_do_idle_irqprio(void) * be raised. */ pmr = gic_read_pmr(); - gic_write_pmr(GIC_PRIO_IRQON); + gic_write_pmr(GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET); __cpu_do_idle(); @@ -307,11 +309,18 @@ static void tls_thread_flush(void) } } +static void flush_tagged_addr_state(void) +{ + if (IS_ENABLED(CONFIG_ARM64_TAGGED_ADDR_ABI)) + clear_thread_flag(TIF_TAGGED_ADDR); +} + void flush_thread(void) { fpsimd_flush_thread(); tls_thread_flush(); flush_ptrace_hw_breakpoint(current); + flush_tagged_addr_state(); } void release_thread(struct task_struct *dead_task) @@ -398,7 +407,7 @@ int copy_thread(unsigned long clone_flags, unsigned long stack_start, childregs->pstate |= PSR_UAO_BIT; if (arm64_get_ssbd_state() == ARM64_SSBD_FORCE_DISABLE) - childregs->pstate |= PSR_SSBS_BIT; + set_ssbs_bit(childregs); if (system_uses_irq_prio_masking()) childregs->pmr_save = GIC_PRIO_IRQON; @@ -443,6 +452,32 @@ void uao_thread_switch(struct task_struct *next) } /* + * Force SSBS state on context-switch, since it may be lost after migrating + * from a CPU which treats the bit as RES0 in a heterogeneous system. + */ +static void ssbs_thread_switch(struct task_struct *next) +{ + struct pt_regs *regs = task_pt_regs(next); + + /* + * Nothing to do for kernel threads, but 'regs' may be junk + * (e.g. idle task) so check the flags and bail early. + */ + if (unlikely(next->flags & PF_KTHREAD)) + return; + + /* If the mitigation is enabled, then we leave SSBS clear. */ + if ((arm64_get_ssbd_state() == ARM64_SSBD_FORCE_ENABLE) || + test_tsk_thread_flag(next, TIF_SSBD)) + return; + + if (compat_user_mode(regs)) + set_compat_ssbs_bit(regs); + else if (user_mode(regs)) + set_ssbs_bit(regs); +} + +/* * We store our current task in sp_el0, which is clobbered by userspace. Keep a * shadow copy so that we can restore this upon entry from userspace. * @@ -471,6 +506,7 @@ __notrace_funcgraph struct task_struct *__switch_to(struct task_struct *prev, entry_task_switch(next); uao_thread_switch(next); ptrauth_thread_switch(next); + ssbs_thread_switch(next); /* * Complete any pending TLB or cache maintenance on this CPU in case @@ -498,11 +534,8 @@ unsigned long get_wchan(struct task_struct *p) if (!stack_page) return 0; - frame.fp = thread_saved_fp(p); - frame.pc = thread_saved_pc(p); -#ifdef CONFIG_FUNCTION_GRAPH_TRACER - frame.graph = 0; -#endif + start_backtrace(&frame, thread_saved_fp(p), thread_saved_pc(p)); + do { if (unwind_frame(p, &frame)) goto out; @@ -524,14 +557,6 @@ unsigned long arch_align_stack(unsigned long sp) return sp & ~0xf; } -unsigned long arch_randomize_brk(struct mm_struct *mm) -{ - if (is_compat_task()) - return randomize_page(mm->brk, SZ_32M); - else - return randomize_page(mm->brk, SZ_1G); -} - /* * Called from setup_new_exec() after (COMPAT_)SET_PERSONALITY. */ @@ -541,3 +566,70 @@ void arch_setup_new_exec(void) ptrauth_thread_init_user(current); } + +#ifdef CONFIG_ARM64_TAGGED_ADDR_ABI +/* + * Control the relaxed ABI allowing tagged user addresses into the kernel. + */ +static unsigned int tagged_addr_disabled; + +long set_tagged_addr_ctrl(unsigned long arg) +{ + if (is_compat_task()) + return -EINVAL; + if (arg & ~PR_TAGGED_ADDR_ENABLE) + return -EINVAL; + + /* + * Do not allow the enabling of the tagged address ABI if globally + * disabled via sysctl abi.tagged_addr_disabled. + */ + if (arg & PR_TAGGED_ADDR_ENABLE && tagged_addr_disabled) + return -EINVAL; + + update_thread_flag(TIF_TAGGED_ADDR, arg & PR_TAGGED_ADDR_ENABLE); + + return 0; +} + +long get_tagged_addr_ctrl(void) +{ + if (is_compat_task()) + return -EINVAL; + + if (test_thread_flag(TIF_TAGGED_ADDR)) + return PR_TAGGED_ADDR_ENABLE; + + return 0; +} + +/* + * Global sysctl to disable the tagged user addresses support. This control + * only prevents the tagged address ABI enabling via prctl() and does not + * disable it for tasks that already opted in to the relaxed ABI. + */ +static int zero; +static int one = 1; + +static struct ctl_table tagged_addr_sysctl_table[] = { + { + .procname = "tagged_addr_disabled", + .mode = 0644, + .data = &tagged_addr_disabled, + .maxlen = sizeof(int), + .proc_handler = proc_dointvec_minmax, + .extra1 = &zero, + .extra2 = &one, + }, + { } +}; + +static int __init tagged_addr_init(void) +{ + if (!register_sysctl("abi", tagged_addr_sysctl_table)) + return -EINVAL; + return 0; +} + +core_initcall(tagged_addr_init); +#endif /* CONFIG_ARM64_TAGGED_ADDR_ABI */ diff --git a/arch/arm64/kernel/psci.c b/arch/arm64/kernel/psci.c index 85ee7d07889e..c9f72b2665f1 100644 --- a/arch/arm64/kernel/psci.c +++ b/arch/arm64/kernel/psci.c @@ -46,6 +46,11 @@ static int cpu_psci_cpu_boot(unsigned int cpu) } #ifdef CONFIG_HOTPLUG_CPU +static bool cpu_psci_cpu_can_disable(unsigned int cpu) +{ + return !psci_tos_resident_on(cpu); +} + static int cpu_psci_cpu_disable(unsigned int cpu) { /* Fail early if we don't have CPU_OFF support */ @@ -105,14 +110,11 @@ static int cpu_psci_cpu_kill(unsigned int cpu) const struct cpu_operations cpu_psci_ops = { .name = "psci", -#ifdef CONFIG_CPU_IDLE - .cpu_init_idle = psci_cpu_init_idle, - .cpu_suspend = psci_cpu_suspend_enter, -#endif .cpu_init = cpu_psci_cpu_init, .cpu_prepare = cpu_psci_cpu_prepare, .cpu_boot = cpu_psci_cpu_boot, #ifdef CONFIG_HOTPLUG_CPU + .cpu_can_disable = cpu_psci_cpu_can_disable, .cpu_disable = cpu_psci_cpu_disable, .cpu_die = cpu_psci_cpu_die, .cpu_kill = cpu_psci_cpu_kill, diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c index da2441d7b066..21176d02e21a 100644 --- a/arch/arm64/kernel/ptrace.c +++ b/arch/arm64/kernel/ptrace.c @@ -870,7 +870,7 @@ static int sve_set(struct task_struct *target, goto out; /* - * Apart from PT_SVE_REGS_MASK, all PT_SVE_* flags are consumed by + * Apart from SVE_PT_REGS_MASK, all SVE_PT_* flags are consumed by * sve_set_vector_length(), which will also validate them for us: */ ret = sve_set_vector_length(target, header.vl, @@ -1808,8 +1808,12 @@ static void tracehook_report_syscall(struct pt_regs *regs, int syscall_trace_enter(struct pt_regs *regs) { - if (test_thread_flag(TIF_SYSCALL_TRACE)) + if (test_thread_flag(TIF_SYSCALL_TRACE) || + test_thread_flag(TIF_SYSCALL_EMU)) { tracehook_report_syscall(regs, PTRACE_SYSCALL_ENTER); + if (!in_syscall(regs) || test_thread_flag(TIF_SYSCALL_EMU)) + return -1; + } /* Do the secure computing after ptrace; failures should be fast. */ if (secure_computing(NULL) == -1) diff --git a/arch/arm64/kernel/return_address.c b/arch/arm64/kernel/return_address.c index b21cba90f82d..a5e8b3b9d798 100644 --- a/arch/arm64/kernel/return_address.c +++ b/arch/arm64/kernel/return_address.c @@ -8,6 +8,7 @@ #include <linux/export.h> #include <linux/ftrace.h> +#include <linux/kprobes.h> #include <asm/stack_pointer.h> #include <asm/stacktrace.h> @@ -29,6 +30,7 @@ static int save_return_addr(struct stackframe *frame, void *d) return 0; } } +NOKPROBE_SYMBOL(save_return_addr); void *return_address(unsigned int level) { @@ -38,12 +40,9 @@ void *return_address(unsigned int level) data.level = level + 2; data.addr = NULL; - frame.fp = (unsigned long)__builtin_frame_address(0); - frame.pc = (unsigned long)return_address; /* dummy */ -#ifdef CONFIG_FUNCTION_GRAPH_TRACER - frame.graph = 0; -#endif - + start_backtrace(&frame, + (unsigned long)__builtin_frame_address(0), + (unsigned long)return_address); walk_stackframe(current, &frame, save_return_addr, &data); if (!data.level) @@ -52,3 +51,4 @@ void *return_address(unsigned int level) return NULL; } EXPORT_SYMBOL_GPL(return_address); +NOKPROBE_SYMBOL(return_address); diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c index 7e541f947b4c..56f664561754 100644 --- a/arch/arm64/kernel/setup.c +++ b/arch/arm64/kernel/setup.c @@ -170,9 +170,13 @@ static void __init smp_build_mpidr_hash(void) static void __init setup_machine_fdt(phys_addr_t dt_phys) { - void *dt_virt = fixmap_remap_fdt(dt_phys); + int size; + void *dt_virt = fixmap_remap_fdt(dt_phys, &size, PAGE_KERNEL); const char *name; + if (dt_virt) + memblock_reserve(dt_phys, size); + if (!dt_virt || !early_init_dt_scan(dt_virt)) { pr_crit("\n" "Error: invalid device tree blob at physical address %pa (virtual address 0x%p)\n" @@ -184,6 +188,9 @@ static void __init setup_machine_fdt(phys_addr_t dt_phys) cpu_relax(); } + /* Early fixups are done, map the FDT as read-only now */ + fixmap_remap_fdt(dt_phys, &size, PAGE_KERNEL_RO); + name = of_flat_dt_get_machine_name(); if (!name) return; @@ -283,6 +290,11 @@ void __init setup_arch(char **cmdline_p) setup_machine_fdt(__fdt_pointer); + /* + * Initialise the static keys early as they may be enabled by the + * cpufeature code and early parameters. + */ + jump_label_init(); parse_early_param(); /* @@ -352,6 +364,15 @@ void __init setup_arch(char **cmdline_p) } } +static inline bool cpu_can_disable(unsigned int cpu) +{ +#ifdef CONFIG_HOTPLUG_CPU + if (cpu_ops[cpu] && cpu_ops[cpu]->cpu_can_disable) + return cpu_ops[cpu]->cpu_can_disable(cpu); +#endif + return false; +} + static int __init topology_init(void) { int i; @@ -361,7 +382,7 @@ static int __init topology_init(void) for_each_possible_cpu(i) { struct cpu *cpu = &per_cpu(cpu_data.cpu, i); - cpu->hotpluggable = 1; + cpu->hotpluggable = cpu_can_disable(i); register_cpu(cpu, i); } diff --git a/arch/arm64/kernel/signal32.c b/arch/arm64/kernel/signal32.c index 331d1e5acad4..12a585386c2f 100644 --- a/arch/arm64/kernel/signal32.c +++ b/arch/arm64/kernel/signal32.c @@ -18,42 +18,7 @@ #include <asm/traps.h> #include <linux/uaccess.h> #include <asm/unistd.h> - -struct compat_sigcontext { - /* We always set these two fields to 0 */ - compat_ulong_t trap_no; - compat_ulong_t error_code; - - compat_ulong_t oldmask; - compat_ulong_t arm_r0; - compat_ulong_t arm_r1; - compat_ulong_t arm_r2; - compat_ulong_t arm_r3; - compat_ulong_t arm_r4; - compat_ulong_t arm_r5; - compat_ulong_t arm_r6; - compat_ulong_t arm_r7; - compat_ulong_t arm_r8; - compat_ulong_t arm_r9; - compat_ulong_t arm_r10; - compat_ulong_t arm_fp; - compat_ulong_t arm_ip; - compat_ulong_t arm_sp; - compat_ulong_t arm_lr; - compat_ulong_t arm_pc; - compat_ulong_t arm_cpsr; - compat_ulong_t fault_address; -}; - -struct compat_ucontext { - compat_ulong_t uc_flags; - compat_uptr_t uc_link; - compat_stack_t uc_stack; - struct compat_sigcontext uc_mcontext; - compat_sigset_t uc_sigmask; - int __unused[32 - (sizeof (compat_sigset_t) / sizeof (int))]; - compat_ulong_t uc_regspace[128] __attribute__((__aligned__(8))); -}; +#include <asm/vdso.h> struct compat_vfp_sigframe { compat_ulong_t magic; @@ -81,16 +46,6 @@ struct compat_aux_sigframe { unsigned long end_magic; } __attribute__((__aligned__(8))); -struct compat_sigframe { - struct compat_ucontext uc; - compat_ulong_t retcode[2]; -}; - -struct compat_rt_sigframe { - struct compat_siginfo info; - struct compat_sigframe sig; -}; - #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) static inline int put_sigset_t(compat_sigset_t __user *uset, sigset_t *set) @@ -387,6 +342,30 @@ static void compat_setup_return(struct pt_regs *regs, struct k_sigaction *ka, retcode = ptr_to_compat(ka->sa.sa_restorer); } else { /* Set up sigreturn pointer */ +#ifdef CONFIG_COMPAT_VDSO + void *vdso_base = current->mm->context.vdso; + void *vdso_trampoline; + + if (ka->sa.sa_flags & SA_SIGINFO) { + if (thumb) { + vdso_trampoline = VDSO_SYMBOL(vdso_base, + compat_rt_sigreturn_thumb); + } else { + vdso_trampoline = VDSO_SYMBOL(vdso_base, + compat_rt_sigreturn_arm); + } + } else { + if (thumb) { + vdso_trampoline = VDSO_SYMBOL(vdso_base, + compat_sigreturn_thumb); + } else { + vdso_trampoline = VDSO_SYMBOL(vdso_base, + compat_sigreturn_arm); + } + } + + retcode = ptr_to_compat(vdso_trampoline) + thumb; +#else unsigned int idx = thumb << 1; if (ka->sa.sa_flags & SA_SIGINFO) @@ -394,6 +373,7 @@ static void compat_setup_return(struct pt_regs *regs, struct k_sigaction *ka, retcode = (unsigned long)current->mm->context.vdso + (idx << 2) + thumb; +#endif } regs->regs[0] = usig; diff --git a/arch/arm64/kernel/sleep.S b/arch/arm64/kernel/sleep.S index 3e53ffa07994..f5b04dd8a710 100644 --- a/arch/arm64/kernel/sleep.S +++ b/arch/arm64/kernel/sleep.S @@ -27,7 +27,7 @@ * aff0 = mpidr_masked & 0xff; * aff1 = mpidr_masked & 0xff00; * aff2 = mpidr_masked & 0xff0000; - * aff2 = mpidr_masked & 0xff00000000; + * aff3 = mpidr_masked & 0xff00000000; * dst = (aff0 >> rs0 | aff1 >> rs1 | aff2 >> rs2 | aff3 >> rs3); *} * Input registers: rs0, rs1, rs2, rs3, mpidr, mask diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c index 6dcf9607d770..dc9fe879c279 100644 --- a/arch/arm64/kernel/smp.c +++ b/arch/arm64/kernel/smp.c @@ -123,7 +123,7 @@ int __cpu_up(unsigned int cpu, struct task_struct *idle) * time out. */ wait_for_completion_timeout(&cpu_running, - msecs_to_jiffies(1000)); + msecs_to_jiffies(5000)); if (!cpu_online(cpu)) { pr_crit("CPU%u: failed to come online\n", cpu); @@ -136,6 +136,7 @@ int __cpu_up(unsigned int cpu, struct task_struct *idle) secondary_data.task = NULL; secondary_data.stack = NULL; + __flush_dcache_area(&secondary_data, sizeof(secondary_data)); status = READ_ONCE(secondary_data.status); if (ret && status) { @@ -146,14 +147,15 @@ int __cpu_up(unsigned int cpu, struct task_struct *idle) default: pr_err("CPU%u: failed in unknown state : 0x%lx\n", cpu, status); + cpus_stuck_in_kernel++; break; case CPU_KILL_ME: if (!op_cpu_kill(cpu)) { pr_crit("CPU%u: died during early boot\n", cpu); break; } - /* Fall through */ pr_crit("CPU%u: may not have shut down cleanly\n", cpu); + /* Fall through */ case CPU_STUCK_IN_KERNEL: pr_crit("CPU%u: is stuck in kernel\n", cpu); if (status & CPU_STUCK_REASON_52_BIT_VA) @@ -181,11 +183,7 @@ static void init_gic_priority_masking(void) WARN_ON(!(cpuflags & PSR_I_BIT)); - gic_write_pmr(GIC_PRIO_IRQOFF); - - /* We can only unmask PSR.I if we can take aborts */ - if (!(cpuflags & PSR_A_BIT)) - write_sysreg(cpuflags & ~PSR_I_BIT, daif); + gic_write_pmr(GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET); } /* @@ -424,11 +422,6 @@ void __init smp_cpus_done(unsigned int max_cpus) void __init smp_prepare_boot_cpu(void) { set_my_cpu_offset(per_cpu_offset(smp_processor_id())); - /* - * Initialise the static keys early as they may be enabled by the - * cpufeature code. - */ - jump_label_init(); cpuinfo_store_boot_cpu(); /* @@ -834,18 +827,23 @@ void arch_irq_work_raise(void) } #endif -/* - * ipi_cpu_stop - handle IPI from smp_send_stop() - */ -static void ipi_cpu_stop(unsigned int cpu) +static void local_cpu_stop(void) { - set_cpu_online(cpu, false); + set_cpu_online(smp_processor_id(), false); local_daif_mask(); sdei_mask_local_cpu(); + cpu_park_loop(); +} - while (1) - cpu_relax(); +/* + * We need to implement panic_smp_self_stop() for parallel panic() calls, so + * that cpu_online_mask gets correctly updated and smp_send_stop() can skip + * CPUs that have already stopped themselves. + */ +void panic_smp_self_stop(void) +{ + local_cpu_stop(); } #ifdef CONFIG_KEXEC_CORE @@ -898,7 +896,7 @@ void handle_IPI(int ipinr, struct pt_regs *regs) case IPI_CPU_STOP: irq_enter(); - ipi_cpu_stop(cpu); + local_cpu_stop(); irq_exit(); break; diff --git a/arch/arm64/kernel/smp_spin_table.c b/arch/arm64/kernel/smp_spin_table.c index 76c2739ba8a4..c8a3fee00c11 100644 --- a/arch/arm64/kernel/smp_spin_table.c +++ b/arch/arm64/kernel/smp_spin_table.c @@ -19,7 +19,7 @@ #include <asm/smp_plat.h> extern void secondary_holding_pen(void); -volatile unsigned long __section(".mmuoff.data.read") +volatile unsigned long __section(.mmuoff.data.read) secondary_holding_pen_release = INVALID_HWID; static phys_addr_t cpu_release_addr[NR_CPUS]; diff --git a/arch/arm64/kernel/stacktrace.c b/arch/arm64/kernel/stacktrace.c index 62d395151abe..a336cb124320 100644 --- a/arch/arm64/kernel/stacktrace.c +++ b/arch/arm64/kernel/stacktrace.c @@ -7,6 +7,7 @@ #include <linux/kernel.h> #include <linux/export.h> #include <linux/ftrace.h> +#include <linux/kprobes.h> #include <linux/sched.h> #include <linux/sched/debug.h> #include <linux/sched/task_stack.h> @@ -29,9 +30,18 @@ * ldp x29, x30, [sp] * add sp, sp, #0x10 */ + +/* + * Unwind from one frame record (A) to the next frame record (B). + * + * We terminate early if the location of B indicates a malformed chain of frame + * records (e.g. a cycle), determined based on the location and fp value of A + * and the location (but not the fp value) of B. + */ int notrace unwind_frame(struct task_struct *tsk, struct stackframe *frame) { unsigned long fp = frame->fp; + struct stack_info info; if (fp & 0xf) return -EINVAL; @@ -39,11 +49,40 @@ int notrace unwind_frame(struct task_struct *tsk, struct stackframe *frame) if (!tsk) tsk = current; - if (!on_accessible_stack(tsk, fp, NULL)) + if (!on_accessible_stack(tsk, fp, &info)) + return -EINVAL; + + if (test_bit(info.type, frame->stacks_done)) return -EINVAL; + /* + * As stacks grow downward, any valid record on the same stack must be + * at a strictly higher address than the prior record. + * + * Stacks can nest in several valid orders, e.g. + * + * TASK -> IRQ -> OVERFLOW -> SDEI_NORMAL + * TASK -> SDEI_NORMAL -> SDEI_CRITICAL -> OVERFLOW + * + * ... but the nesting itself is strict. Once we transition from one + * stack to another, it's never valid to unwind back to that first + * stack. + */ + if (info.type == frame->prev_type) { + if (fp <= frame->prev_fp) + return -EINVAL; + } else { + set_bit(frame->prev_type, frame->stacks_done); + } + + /* + * Record this frame record's values and location. The prev_fp and + * prev_type are only meaningful to the next unwind_frame() invocation. + */ frame->fp = READ_ONCE_NOCHECK(*(unsigned long *)(fp)); frame->pc = READ_ONCE_NOCHECK(*(unsigned long *)(fp + 8)); + frame->prev_fp = fp; + frame->prev_type = info.type; #ifdef CONFIG_FUNCTION_GRAPH_TRACER if (tsk->ret_stack && @@ -73,6 +112,7 @@ int notrace unwind_frame(struct task_struct *tsk, struct stackframe *frame) return 0; } +NOKPROBE_SYMBOL(unwind_frame); void notrace walk_stackframe(struct task_struct *tsk, struct stackframe *frame, int (*fn)(struct stackframe *, void *), void *data) @@ -87,6 +127,7 @@ void notrace walk_stackframe(struct task_struct *tsk, struct stackframe *frame, break; } } +NOKPROBE_SYMBOL(walk_stackframe); #ifdef CONFIG_STACKTRACE struct stack_trace_data { @@ -122,12 +163,7 @@ void save_stack_trace_regs(struct pt_regs *regs, struct stack_trace *trace) data.skip = trace->skip; data.no_sched_functions = 0; - frame.fp = regs->regs[29]; - frame.pc = regs->pc; -#ifdef CONFIG_FUNCTION_GRAPH_TRACER - frame.graph = 0; -#endif - + start_backtrace(&frame, regs->regs[29], regs->pc); walk_stackframe(current, &frame, save_trace, &data); } EXPORT_SYMBOL_GPL(save_stack_trace_regs); @@ -146,17 +182,15 @@ static noinline void __save_stack_trace(struct task_struct *tsk, data.no_sched_functions = nosched; if (tsk != current) { - frame.fp = thread_saved_fp(tsk); - frame.pc = thread_saved_pc(tsk); + start_backtrace(&frame, thread_saved_fp(tsk), + thread_saved_pc(tsk)); } else { /* We don't want this function nor the caller */ data.skip += 2; - frame.fp = (unsigned long)__builtin_frame_address(0); - frame.pc = (unsigned long)__save_stack_trace; + start_backtrace(&frame, + (unsigned long)__builtin_frame_address(0), + (unsigned long)__save_stack_trace); } -#ifdef CONFIG_FUNCTION_GRAPH_TRACER - frame.graph = 0; -#endif walk_stackframe(tsk, &frame, save_trace, &data); diff --git a/arch/arm64/kernel/time.c b/arch/arm64/kernel/time.c index 9f25aedeac9d..0b2946414dc9 100644 --- a/arch/arm64/kernel/time.c +++ b/arch/arm64/kernel/time.c @@ -38,11 +38,8 @@ unsigned long profile_pc(struct pt_regs *regs) if (!in_lock_functions(regs->pc)) return regs->pc; - frame.fp = regs->regs[29]; - frame.pc = regs->pc; -#ifdef CONFIG_FUNCTION_GRAPH_TRACER - frame.graph = 0; -#endif + start_backtrace(&frame, regs->regs[29], regs->pc); + do { int ret = unwind_frame(NULL, &frame); if (ret < 0) diff --git a/arch/arm64/kernel/topology.c b/arch/arm64/kernel/topology.c index 0825c4a856e3..fa9528dfd0ce 100644 --- a/arch/arm64/kernel/topology.c +++ b/arch/arm64/kernel/topology.c @@ -14,250 +14,13 @@ #include <linux/acpi.h> #include <linux/arch_topology.h> #include <linux/cacheinfo.h> -#include <linux/cpu.h> -#include <linux/cpumask.h> #include <linux/init.h> #include <linux/percpu.h> -#include <linux/node.h> -#include <linux/nodemask.h> -#include <linux/of.h> -#include <linux/sched.h> -#include <linux/sched/topology.h> -#include <linux/slab.h> -#include <linux/smp.h> -#include <linux/string.h> #include <asm/cpu.h> #include <asm/cputype.h> #include <asm/topology.h> -static int __init get_cpu_for_node(struct device_node *node) -{ - struct device_node *cpu_node; - int cpu; - - cpu_node = of_parse_phandle(node, "cpu", 0); - if (!cpu_node) - return -1; - - cpu = of_cpu_node_to_id(cpu_node); - if (cpu >= 0) - topology_parse_cpu_capacity(cpu_node, cpu); - else - pr_crit("Unable to find CPU node for %pOF\n", cpu_node); - - of_node_put(cpu_node); - return cpu; -} - -static int __init parse_core(struct device_node *core, int package_id, - int core_id) -{ - char name[10]; - bool leaf = true; - int i = 0; - int cpu; - struct device_node *t; - - do { - snprintf(name, sizeof(name), "thread%d", i); - t = of_get_child_by_name(core, name); - if (t) { - leaf = false; - cpu = get_cpu_for_node(t); - if (cpu >= 0) { - cpu_topology[cpu].package_id = package_id; - cpu_topology[cpu].core_id = core_id; - cpu_topology[cpu].thread_id = i; - } else { - pr_err("%pOF: Can't get CPU for thread\n", - t); - of_node_put(t); - return -EINVAL; - } - of_node_put(t); - } - i++; - } while (t); - - cpu = get_cpu_for_node(core); - if (cpu >= 0) { - if (!leaf) { - pr_err("%pOF: Core has both threads and CPU\n", - core); - return -EINVAL; - } - - cpu_topology[cpu].package_id = package_id; - cpu_topology[cpu].core_id = core_id; - } else if (leaf) { - pr_err("%pOF: Can't get CPU for leaf core\n", core); - return -EINVAL; - } - - return 0; -} - -static int __init parse_cluster(struct device_node *cluster, int depth) -{ - char name[10]; - bool leaf = true; - bool has_cores = false; - struct device_node *c; - static int package_id __initdata; - int core_id = 0; - int i, ret; - - /* - * First check for child clusters; we currently ignore any - * information about the nesting of clusters and present the - * scheduler with a flat list of them. - */ - i = 0; - do { - snprintf(name, sizeof(name), "cluster%d", i); - c = of_get_child_by_name(cluster, name); - if (c) { - leaf = false; - ret = parse_cluster(c, depth + 1); - of_node_put(c); - if (ret != 0) - return ret; - } - i++; - } while (c); - - /* Now check for cores */ - i = 0; - do { - snprintf(name, sizeof(name), "core%d", i); - c = of_get_child_by_name(cluster, name); - if (c) { - has_cores = true; - - if (depth == 0) { - pr_err("%pOF: cpu-map children should be clusters\n", - c); - of_node_put(c); - return -EINVAL; - } - - if (leaf) { - ret = parse_core(c, package_id, core_id++); - } else { - pr_err("%pOF: Non-leaf cluster with core %s\n", - cluster, name); - ret = -EINVAL; - } - - of_node_put(c); - if (ret != 0) - return ret; - } - i++; - } while (c); - - if (leaf && !has_cores) - pr_warn("%pOF: empty cluster\n", cluster); - - if (leaf) - package_id++; - - return 0; -} - -static int __init parse_dt_topology(void) -{ - struct device_node *cn, *map; - int ret = 0; - int cpu; - - cn = of_find_node_by_path("/cpus"); - if (!cn) { - pr_err("No CPU information found in DT\n"); - return 0; - } - - /* - * When topology is provided cpu-map is essentially a root - * cluster with restricted subnodes. - */ - map = of_get_child_by_name(cn, "cpu-map"); - if (!map) - goto out; - - ret = parse_cluster(map, 0); - if (ret != 0) - goto out_map; - - topology_normalize_cpu_scale(); - - /* - * Check that all cores are in the topology; the SMP code will - * only mark cores described in the DT as possible. - */ - for_each_possible_cpu(cpu) - if (cpu_topology[cpu].package_id == -1) - ret = -EINVAL; - -out_map: - of_node_put(map); -out: - of_node_put(cn); - return ret; -} - -/* - * cpu topology table - */ -struct cpu_topology cpu_topology[NR_CPUS]; -EXPORT_SYMBOL_GPL(cpu_topology); - -const struct cpumask *cpu_coregroup_mask(int cpu) -{ - const cpumask_t *core_mask = cpumask_of_node(cpu_to_node(cpu)); - - /* Find the smaller of NUMA, core or LLC siblings */ - if (cpumask_subset(&cpu_topology[cpu].core_sibling, core_mask)) { - /* not numa in package, lets use the package siblings */ - core_mask = &cpu_topology[cpu].core_sibling; - } - if (cpu_topology[cpu].llc_id != -1) { - if (cpumask_subset(&cpu_topology[cpu].llc_sibling, core_mask)) - core_mask = &cpu_topology[cpu].llc_sibling; - } - - return core_mask; -} - -static void update_siblings_masks(unsigned int cpuid) -{ - struct cpu_topology *cpu_topo, *cpuid_topo = &cpu_topology[cpuid]; - int cpu; - - /* update core and thread sibling masks */ - for_each_online_cpu(cpu) { - cpu_topo = &cpu_topology[cpu]; - - if (cpuid_topo->llc_id == cpu_topo->llc_id) { - cpumask_set_cpu(cpu, &cpuid_topo->llc_sibling); - cpumask_set_cpu(cpuid, &cpu_topo->llc_sibling); - } - - if (cpuid_topo->package_id != cpu_topo->package_id) - continue; - - cpumask_set_cpu(cpuid, &cpu_topo->core_sibling); - cpumask_set_cpu(cpu, &cpuid_topo->core_sibling); - - if (cpuid_topo->core_id != cpu_topo->core_id) - continue; - - cpumask_set_cpu(cpuid, &cpu_topo->thread_sibling); - cpumask_set_cpu(cpu, &cpuid_topo->thread_sibling); - } -} - void store_cpu_topology(unsigned int cpuid) { struct cpu_topology *cpuid_topo = &cpu_topology[cpuid]; @@ -296,60 +59,31 @@ topology_populated: update_siblings_masks(cpuid); } -static void clear_cpu_topology(int cpu) -{ - struct cpu_topology *cpu_topo = &cpu_topology[cpu]; - - cpumask_clear(&cpu_topo->llc_sibling); - cpumask_set_cpu(cpu, &cpu_topo->llc_sibling); - - cpumask_clear(&cpu_topo->core_sibling); - cpumask_set_cpu(cpu, &cpu_topo->core_sibling); - cpumask_clear(&cpu_topo->thread_sibling); - cpumask_set_cpu(cpu, &cpu_topo->thread_sibling); -} - -static void __init reset_cpu_topology(void) -{ - unsigned int cpu; - - for_each_possible_cpu(cpu) { - struct cpu_topology *cpu_topo = &cpu_topology[cpu]; - - cpu_topo->thread_id = -1; - cpu_topo->core_id = 0; - cpu_topo->package_id = -1; - cpu_topo->llc_id = -1; - - clear_cpu_topology(cpu); - } -} - -void remove_cpu_topology(unsigned int cpu) +#ifdef CONFIG_ACPI +static bool __init acpi_cpu_is_threaded(int cpu) { - int sibling; + int is_threaded = acpi_pptt_cpu_is_thread(cpu); - for_each_cpu(sibling, topology_core_cpumask(cpu)) - cpumask_clear_cpu(cpu, topology_core_cpumask(sibling)); - for_each_cpu(sibling, topology_sibling_cpumask(cpu)) - cpumask_clear_cpu(cpu, topology_sibling_cpumask(sibling)); - for_each_cpu(sibling, topology_llc_cpumask(cpu)) - cpumask_clear_cpu(cpu, topology_llc_cpumask(sibling)); + /* + * if the PPTT doesn't have thread information, assume a homogeneous + * machine and return the current CPU's thread state. + */ + if (is_threaded < 0) + is_threaded = read_cpuid_mpidr() & MPIDR_MT_BITMASK; - clear_cpu_topology(cpu); + return !!is_threaded; } -#ifdef CONFIG_ACPI /* * Propagate the topology information of the processor_topology_node tree to the * cpu_topology array. */ -static int __init parse_acpi_topology(void) +int __init parse_acpi_topology(void) { - bool is_threaded; int cpu, topology_id; - is_threaded = read_cpuid_mpidr() & MPIDR_MT_BITMASK; + if (acpi_disabled) + return 0; for_each_possible_cpu(cpu) { int i, cache_id; @@ -358,7 +92,7 @@ static int __init parse_acpi_topology(void) if (topology_id < 0) return topology_id; - if (is_threaded) { + if (acpi_cpu_is_threaded(cpu)) { cpu_topology[cpu].thread_id = topology_id; topology_id = find_acpi_cpu_topology(cpu, 1); cpu_topology[cpu].core_id = topology_id; @@ -384,24 +118,6 @@ static int __init parse_acpi_topology(void) return 0; } - -#else -static inline int __init parse_acpi_topology(void) -{ - return -EINVAL; -} #endif -void __init init_cpu_topology(void) -{ - reset_cpu_topology(); - /* - * Discard anything that was parsed if we hit an error so we - * don't use partial information. - */ - if (!acpi_disabled && parse_acpi_topology()) - reset_cpu_topology(); - else if (of_have_populated_dt() && parse_dt_topology()) - reset_cpu_topology(); -} diff --git a/arch/arm64/kernel/traps.c b/arch/arm64/kernel/traps.c index 985721a1264c..34739e80211b 100644 --- a/arch/arm64/kernel/traps.c +++ b/arch/arm64/kernel/traps.c @@ -7,9 +7,11 @@ */ #include <linux/bug.h> +#include <linux/context_tracking.h> #include <linux/signal.h> #include <linux/personality.h> #include <linux/kallsyms.h> +#include <linux/kprobes.h> #include <linux/spinlock.h> #include <linux/uaccess.h> #include <linux/hardirq.h> @@ -55,16 +57,19 @@ static void dump_backtrace_entry(unsigned long where) printk(" %pS\n", (void *)where); } -static void __dump_instr(const char *lvl, struct pt_regs *regs) +static void dump_kernel_instr(const char *lvl, struct pt_regs *regs) { unsigned long addr = instruction_pointer(regs); char str[sizeof("00000000 ") * 5 + 2 + 1], *p = str; int i; + if (user_mode(regs)) + return; + for (i = -4; i < 1; i++) { unsigned int val, bad; - bad = get_user(val, &((u32 *)addr)[i]); + bad = aarch64_insn_read(&((u32 *)addr)[i], &val); if (!bad) p += sprintf(p, i == 0 ? "(%08x) " : "%08x ", val); @@ -73,19 +78,8 @@ static void __dump_instr(const char *lvl, struct pt_regs *regs) break; } } - printk("%sCode: %s\n", lvl, str); -} -static void dump_instr(const char *lvl, struct pt_regs *regs) -{ - if (!user_mode(regs)) { - mm_segment_t fs = get_fs(); - set_fs(KERNEL_DS); - __dump_instr(lvl, regs); - set_fs(fs); - } else { - __dump_instr(lvl, regs); - } + printk("%sCode: %s\n", lvl, str); } void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk) @@ -108,18 +102,17 @@ void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk) return; if (tsk == current) { - frame.fp = (unsigned long)__builtin_frame_address(0); - frame.pc = (unsigned long)dump_backtrace; + start_backtrace(&frame, + (unsigned long)__builtin_frame_address(0), + (unsigned long)dump_backtrace); } else { /* * task blocked in __switch_to */ - frame.fp = thread_saved_fp(tsk); - frame.pc = thread_saved_pc(tsk); + start_backtrace(&frame, + thread_saved_fp(tsk), + thread_saved_pc(tsk)); } -#ifdef CONFIG_FUNCTION_GRAPH_TRACER - frame.graph = 0; -#endif printk("Call trace:\n"); do { @@ -171,8 +164,7 @@ static int __die(const char *str, int err, struct pt_regs *regs) print_modules(); show_regs(regs); - if (!user_mode(regs)) - dump_instr(KERN_EMERG, regs); + dump_kernel_instr(KERN_EMERG, regs); return ret; } @@ -242,16 +234,16 @@ void arm64_force_sig_fault(int signo, int code, void __user *addr, { arm64_show_signal(signo, str); if (signo == SIGKILL) - force_sig(SIGKILL, current); + force_sig(SIGKILL); else - force_sig_fault(signo, code, addr, current); + force_sig_fault(signo, code, addr); } void arm64_force_sig_mceerr(int code, void __user *addr, short lsb, const char *str) { arm64_show_signal(SIGBUS, str); - force_sig_mceerr(code, addr, lsb, current); + force_sig_mceerr(code, addr, lsb); } void arm64_force_sig_ptrace_errno_trap(int errno, void __user *addr, @@ -521,7 +513,7 @@ struct sys64_hook { void (*handler)(unsigned int esr, struct pt_regs *regs); }; -static struct sys64_hook sys64_hooks[] = { +static const struct sys64_hook sys64_hooks[] = { { .esr_mask = ESR_ELx_SYS64_ISS_EL0_CACHE_OP_MASK, .esr_val = ESR_ELx_SYS64_ISS_EL0_CACHE_OP_VAL, @@ -646,7 +638,7 @@ static void compat_cntfrq_read_handler(unsigned int esr, struct pt_regs *regs) arm64_compat_skip_faulting_instruction(regs, 4); } -static struct sys64_hook cp15_32_hooks[] = { +static const struct sys64_hook cp15_32_hooks[] = { { .esr_mask = ESR_ELx_CP15_32_ISS_SYS_MASK, .esr_val = ESR_ELx_CP15_32_ISS_SYS_CNTFRQ, @@ -666,7 +658,7 @@ static void compat_cntvct_read_handler(unsigned int esr, struct pt_regs *regs) arm64_compat_skip_faulting_instruction(regs, 4); } -static struct sys64_hook cp15_64_hooks[] = { +static const struct sys64_hook cp15_64_hooks[] = { { .esr_mask = ESR_ELx_CP15_64_ISS_SYS_MASK, .esr_val = ESR_ELx_CP15_64_ISS_SYS_CNTVCT, @@ -677,7 +669,7 @@ static struct sys64_hook cp15_64_hooks[] = { asmlinkage void __exception do_cp15instr(unsigned int esr, struct pt_regs *regs) { - struct sys64_hook *hook, *hook_base; + const struct sys64_hook *hook, *hook_base; if (!cp15_cond_valid(esr, regs)) { /* @@ -717,7 +709,7 @@ asmlinkage void __exception do_cp15instr(unsigned int esr, struct pt_regs *regs) asmlinkage void __exception do_sysinstr(unsigned int esr, struct pt_regs *regs) { - struct sys64_hook *hook; + const struct sys64_hook *hook; for (hook = sys64_hooks; hook->handler; hook++) if ((hook->esr_mask & esr) == hook->esr_val) { @@ -743,6 +735,7 @@ static const char *esr_class_str[] = { [ESR_ELx_EC_CP14_LS] = "CP14 LDC/STC", [ESR_ELx_EC_FP_ASIMD] = "ASIMD", [ESR_ELx_EC_CP10_ID] = "CP10 MRC/VMRS", + [ESR_ELx_EC_PAC] = "PAC", [ESR_ELx_EC_CP14_64] = "CP14 MCRR/MRRC", [ESR_ELx_EC_ILL] = "PSTATE.IL", [ESR_ELx_EC_SVC32] = "SVC (AArch32)", @@ -753,6 +746,7 @@ static const char *esr_class_str[] = { [ESR_ELx_EC_SMC64] = "SMC (AArch64)", [ESR_ELx_EC_SYS64] = "MSR/MRS (AArch64)", [ESR_ELx_EC_SVE] = "SVE", + [ESR_ELx_EC_ERET] = "ERET/ERETAA/ERETAB", [ESR_ELx_EC_IMP_DEF] = "EL3 IMP DEF", [ESR_ELx_EC_IABT_LOW] = "IABT (lower EL)", [ESR_ELx_EC_IABT_CUR] = "IABT (current EL)", @@ -880,6 +874,10 @@ bool arm64_is_fatal_ras_serror(struct pt_regs *regs, unsigned int esr) /* * The CPU can't make progress. The exception may have * been imprecise. + * + * Neoverse-N1 #1349291 means a non-KVM SError reported as + * Unrecoverable should be treated as Uncontainable. We + * call arm64_serror_panic() in both cases. */ return true; @@ -905,6 +903,13 @@ asmlinkage void do_serror(struct pt_regs *regs, unsigned int esr) nmi_exit(); } +asmlinkage void enter_from_user_mode(void) +{ + CT_WARN_ON(ct_state() != CONTEXT_USER); + user_exit_irqoff(); +} +NOKPROBE_SYMBOL(enter_from_user_mode); + void __pte_error(const char *file, int line, unsigned long val) { pr_err("%s:%d: bad pte %016lx.\n", file, line, val); diff --git a/arch/arm64/kernel/vdso.c b/arch/arm64/kernel/vdso.c index 663b166241d0..354b11e27c07 100644 --- a/arch/arm64/kernel/vdso.c +++ b/arch/arm64/kernel/vdso.c @@ -20,41 +20,212 @@ #include <linux/slab.h> #include <linux/timekeeper_internal.h> #include <linux/vmalloc.h> +#include <vdso/datapage.h> +#include <vdso/helpers.h> +#include <vdso/vsyscall.h> #include <asm/cacheflush.h> #include <asm/signal32.h> #include <asm/vdso.h> -#include <asm/vdso_datapage.h> extern char vdso_start[], vdso_end[]; -static unsigned long vdso_pages __ro_after_init; +#ifdef CONFIG_COMPAT_VDSO +extern char vdso32_start[], vdso32_end[]; +#endif /* CONFIG_COMPAT_VDSO */ + +/* vdso_lookup arch_index */ +enum arch_vdso_type { + ARM64_VDSO = 0, +#ifdef CONFIG_COMPAT_VDSO + ARM64_VDSO32 = 1, +#endif /* CONFIG_COMPAT_VDSO */ +}; +#ifdef CONFIG_COMPAT_VDSO +#define VDSO_TYPES (ARM64_VDSO32 + 1) +#else +#define VDSO_TYPES (ARM64_VDSO + 1) +#endif /* CONFIG_COMPAT_VDSO */ + +struct __vdso_abi { + const char *name; + const char *vdso_code_start; + const char *vdso_code_end; + unsigned long vdso_pages; + /* Data Mapping */ + struct vm_special_mapping *dm; + /* Code Mapping */ + struct vm_special_mapping *cm; +}; + +static struct __vdso_abi vdso_lookup[VDSO_TYPES] __ro_after_init = { + { + .name = "vdso", + .vdso_code_start = vdso_start, + .vdso_code_end = vdso_end, + }, +#ifdef CONFIG_COMPAT_VDSO + { + .name = "vdso32", + .vdso_code_start = vdso32_start, + .vdso_code_end = vdso32_end, + }, +#endif /* CONFIG_COMPAT_VDSO */ +}; /* * The vDSO data page. */ static union { - struct vdso_data data; + struct vdso_data data[CS_BASES]; u8 page[PAGE_SIZE]; } vdso_data_store __page_aligned_data; -struct vdso_data *vdso_data = &vdso_data_store.data; +struct vdso_data *vdso_data = vdso_data_store.data; + +static int __vdso_remap(enum arch_vdso_type arch_index, + const struct vm_special_mapping *sm, + struct vm_area_struct *new_vma) +{ + unsigned long new_size = new_vma->vm_end - new_vma->vm_start; + unsigned long vdso_size = vdso_lookup[arch_index].vdso_code_end - + vdso_lookup[arch_index].vdso_code_start; + + if (vdso_size != new_size) + return -EINVAL; + + current->mm->context.vdso = (void *)new_vma->vm_start; + + return 0; +} + +static int __vdso_init(enum arch_vdso_type arch_index) +{ + int i; + struct page **vdso_pagelist; + unsigned long pfn; + + if (memcmp(vdso_lookup[arch_index].vdso_code_start, "\177ELF", 4)) { + pr_err("vDSO is not a valid ELF object!\n"); + return -EINVAL; + } + + vdso_lookup[arch_index].vdso_pages = ( + vdso_lookup[arch_index].vdso_code_end - + vdso_lookup[arch_index].vdso_code_start) >> + PAGE_SHIFT; + + /* Allocate the vDSO pagelist, plus a page for the data. */ + vdso_pagelist = kcalloc(vdso_lookup[arch_index].vdso_pages + 1, + sizeof(struct page *), + GFP_KERNEL); + if (vdso_pagelist == NULL) + return -ENOMEM; + + /* Grab the vDSO data page. */ + vdso_pagelist[0] = phys_to_page(__pa_symbol(vdso_data)); + + + /* Grab the vDSO code pages. */ + pfn = sym_to_pfn(vdso_lookup[arch_index].vdso_code_start); + + for (i = 0; i < vdso_lookup[arch_index].vdso_pages; i++) + vdso_pagelist[i + 1] = pfn_to_page(pfn + i); + + vdso_lookup[arch_index].dm->pages = &vdso_pagelist[0]; + vdso_lookup[arch_index].cm->pages = &vdso_pagelist[1]; + + return 0; +} + +static int __setup_additional_pages(enum arch_vdso_type arch_index, + struct mm_struct *mm, + struct linux_binprm *bprm, + int uses_interp) +{ + unsigned long vdso_base, vdso_text_len, vdso_mapping_len; + void *ret; + + vdso_text_len = vdso_lookup[arch_index].vdso_pages << PAGE_SHIFT; + /* Be sure to map the data page */ + vdso_mapping_len = vdso_text_len + PAGE_SIZE; + + vdso_base = get_unmapped_area(NULL, 0, vdso_mapping_len, 0, 0); + if (IS_ERR_VALUE(vdso_base)) { + ret = ERR_PTR(vdso_base); + goto up_fail; + } + + ret = _install_special_mapping(mm, vdso_base, PAGE_SIZE, + VM_READ|VM_MAYREAD, + vdso_lookup[arch_index].dm); + if (IS_ERR(ret)) + goto up_fail; + + vdso_base += PAGE_SIZE; + mm->context.vdso = (void *)vdso_base; + ret = _install_special_mapping(mm, vdso_base, vdso_text_len, + VM_READ|VM_EXEC| + VM_MAYREAD|VM_MAYWRITE|VM_MAYEXEC, + vdso_lookup[arch_index].cm); + if (IS_ERR(ret)) + goto up_fail; + + return 0; + +up_fail: + mm->context.vdso = NULL; + return PTR_ERR(ret); +} #ifdef CONFIG_COMPAT /* * Create and map the vectors page for AArch32 tasks. */ +#ifdef CONFIG_COMPAT_VDSO +static int aarch32_vdso_mremap(const struct vm_special_mapping *sm, + struct vm_area_struct *new_vma) +{ + return __vdso_remap(ARM64_VDSO32, sm, new_vma); +} +#endif /* CONFIG_COMPAT_VDSO */ + +/* + * aarch32_vdso_pages: + * 0 - kuser helpers + * 1 - sigreturn code + * or (CONFIG_COMPAT_VDSO): + * 0 - kuser helpers + * 1 - vdso data + * 2 - vdso code + */ #define C_VECTORS 0 +#ifdef CONFIG_COMPAT_VDSO +#define C_VVAR 1 +#define C_VDSO 2 +#define C_PAGES (C_VDSO + 1) +#else #define C_SIGPAGE 1 #define C_PAGES (C_SIGPAGE + 1) +#endif /* CONFIG_COMPAT_VDSO */ static struct page *aarch32_vdso_pages[C_PAGES] __ro_after_init; -static const struct vm_special_mapping aarch32_vdso_spec[C_PAGES] = { +static struct vm_special_mapping aarch32_vdso_spec[C_PAGES] = { { .name = "[vectors]", /* ABI */ .pages = &aarch32_vdso_pages[C_VECTORS], }, +#ifdef CONFIG_COMPAT_VDSO + { + .name = "[vvar]", + }, + { + .name = "[vdso]", + .mremap = aarch32_vdso_mremap, + }, +#else { .name = "[sigpage]", /* ABI */ .pages = &aarch32_vdso_pages[C_SIGPAGE], }, +#endif /* CONFIG_COMPAT_VDSO */ }; static int aarch32_alloc_kuser_vdso_page(void) @@ -77,7 +248,33 @@ static int aarch32_alloc_kuser_vdso_page(void) return 0; } -static int __init aarch32_alloc_vdso_pages(void) +#ifdef CONFIG_COMPAT_VDSO +static int __aarch32_alloc_vdso_pages(void) +{ + int ret; + + vdso_lookup[ARM64_VDSO32].dm = &aarch32_vdso_spec[C_VVAR]; + vdso_lookup[ARM64_VDSO32].cm = &aarch32_vdso_spec[C_VDSO]; + + ret = __vdso_init(ARM64_VDSO32); + if (ret) + return ret; + + ret = aarch32_alloc_kuser_vdso_page(); + if (ret) { + unsigned long c_vvar = + (unsigned long)page_to_virt(aarch32_vdso_pages[C_VVAR]); + unsigned long c_vdso = + (unsigned long)page_to_virt(aarch32_vdso_pages[C_VDSO]); + + free_page(c_vvar); + free_page(c_vdso); + } + + return ret; +} +#else +static int __aarch32_alloc_vdso_pages(void) { extern char __aarch32_sigret_code_start[], __aarch32_sigret_code_end[]; int sigret_sz = __aarch32_sigret_code_end - __aarch32_sigret_code_start; @@ -98,6 +295,12 @@ static int __init aarch32_alloc_vdso_pages(void) return ret; } +#endif /* CONFIG_COMPAT_VDSO */ + +static int __init aarch32_alloc_vdso_pages(void) +{ + return __aarch32_alloc_vdso_pages(); +} arch_initcall(aarch32_alloc_vdso_pages); static int aarch32_kuser_helpers_setup(struct mm_struct *mm) @@ -119,6 +322,7 @@ static int aarch32_kuser_helpers_setup(struct mm_struct *mm) return PTR_ERR_OR_ZERO(ret); } +#ifndef CONFIG_COMPAT_VDSO static int aarch32_sigreturn_setup(struct mm_struct *mm) { unsigned long addr; @@ -146,6 +350,7 @@ static int aarch32_sigreturn_setup(struct mm_struct *mm) out: return PTR_ERR_OR_ZERO(ret); } +#endif /* !CONFIG_COMPAT_VDSO */ int aarch32_setup_additional_pages(struct linux_binprm *bprm, int uses_interp) { @@ -159,7 +364,14 @@ int aarch32_setup_additional_pages(struct linux_binprm *bprm, int uses_interp) if (ret) goto out; +#ifdef CONFIG_COMPAT_VDSO + ret = __setup_additional_pages(ARM64_VDSO32, + mm, + bprm, + uses_interp); +#else ret = aarch32_sigreturn_setup(mm); +#endif /* CONFIG_COMPAT_VDSO */ out: up_write(&mm->mmap_sem); @@ -170,18 +382,18 @@ out: static int vdso_mremap(const struct vm_special_mapping *sm, struct vm_area_struct *new_vma) { - unsigned long new_size = new_vma->vm_end - new_vma->vm_start; - unsigned long vdso_size = vdso_end - vdso_start; - - if (vdso_size != new_size) - return -EINVAL; - - current->mm->context.vdso = (void *)new_vma->vm_start; - - return 0; + return __vdso_remap(ARM64_VDSO, sm, new_vma); } -static struct vm_special_mapping vdso_spec[2] __ro_after_init = { +/* + * aarch64_vdso_pages: + * 0 - vvar + * 1 - vdso + */ +#define A_VVAR 0 +#define A_VDSO 1 +#define A_PAGES (A_VDSO + 1) +static struct vm_special_mapping vdso_spec[A_PAGES] __ro_after_init = { { .name = "[vvar]", }, @@ -193,37 +405,10 @@ static struct vm_special_mapping vdso_spec[2] __ro_after_init = { static int __init vdso_init(void) { - int i; - struct page **vdso_pagelist; - unsigned long pfn; - - if (memcmp(vdso_start, "\177ELF", 4)) { - pr_err("vDSO is not a valid ELF object!\n"); - return -EINVAL; - } - - vdso_pages = (vdso_end - vdso_start) >> PAGE_SHIFT; - - /* Allocate the vDSO pagelist, plus a page for the data. */ - vdso_pagelist = kcalloc(vdso_pages + 1, sizeof(struct page *), - GFP_KERNEL); - if (vdso_pagelist == NULL) - return -ENOMEM; - - /* Grab the vDSO data page. */ - vdso_pagelist[0] = phys_to_page(__pa_symbol(vdso_data)); - - - /* Grab the vDSO code pages. */ - pfn = sym_to_pfn(vdso_start); - - for (i = 0; i < vdso_pages; i++) - vdso_pagelist[i + 1] = pfn_to_page(pfn + i); + vdso_lookup[ARM64_VDSO].dm = &vdso_spec[A_VVAR]; + vdso_lookup[ARM64_VDSO].cm = &vdso_spec[A_VDSO]; - vdso_spec[0].pages = &vdso_pagelist[0]; - vdso_spec[1].pages = &vdso_pagelist[1]; - - return 0; + return __vdso_init(ARM64_VDSO); } arch_initcall(vdso_init); @@ -231,84 +416,17 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp) { struct mm_struct *mm = current->mm; - unsigned long vdso_base, vdso_text_len, vdso_mapping_len; - void *ret; - - vdso_text_len = vdso_pages << PAGE_SHIFT; - /* Be sure to map the data page */ - vdso_mapping_len = vdso_text_len + PAGE_SIZE; + int ret; if (down_write_killable(&mm->mmap_sem)) return -EINTR; - vdso_base = get_unmapped_area(NULL, 0, vdso_mapping_len, 0, 0); - if (IS_ERR_VALUE(vdso_base)) { - ret = ERR_PTR(vdso_base); - goto up_fail; - } - ret = _install_special_mapping(mm, vdso_base, PAGE_SIZE, - VM_READ|VM_MAYREAD, - &vdso_spec[0]); - if (IS_ERR(ret)) - goto up_fail; - - vdso_base += PAGE_SIZE; - mm->context.vdso = (void *)vdso_base; - ret = _install_special_mapping(mm, vdso_base, vdso_text_len, - VM_READ|VM_EXEC| - VM_MAYREAD|VM_MAYWRITE|VM_MAYEXEC, - &vdso_spec[1]); - if (IS_ERR(ret)) - goto up_fail; + ret = __setup_additional_pages(ARM64_VDSO, + mm, + bprm, + uses_interp); up_write(&mm->mmap_sem); - return 0; - -up_fail: - mm->context.vdso = NULL; - up_write(&mm->mmap_sem); - return PTR_ERR(ret); -} -/* - * Update the vDSO data page to keep in sync with kernel timekeeping. - */ -void update_vsyscall(struct timekeeper *tk) -{ - u32 use_syscall = !tk->tkr_mono.clock->archdata.vdso_direct; - - ++vdso_data->tb_seq_count; - smp_wmb(); - - vdso_data->use_syscall = use_syscall; - vdso_data->xtime_coarse_sec = tk->xtime_sec; - vdso_data->xtime_coarse_nsec = tk->tkr_mono.xtime_nsec >> - tk->tkr_mono.shift; - vdso_data->wtm_clock_sec = tk->wall_to_monotonic.tv_sec; - vdso_data->wtm_clock_nsec = tk->wall_to_monotonic.tv_nsec; - - /* Read without the seqlock held by clock_getres() */ - WRITE_ONCE(vdso_data->hrtimer_res, hrtimer_resolution); - - if (!use_syscall) { - /* tkr_mono.cycle_last == tkr_raw.cycle_last */ - vdso_data->cs_cycle_last = tk->tkr_mono.cycle_last; - vdso_data->raw_time_sec = tk->raw_sec; - vdso_data->raw_time_nsec = tk->tkr_raw.xtime_nsec; - vdso_data->xtime_clock_sec = tk->xtime_sec; - vdso_data->xtime_clock_nsec = tk->tkr_mono.xtime_nsec; - vdso_data->cs_mono_mult = tk->tkr_mono.mult; - vdso_data->cs_raw_mult = tk->tkr_raw.mult; - /* tkr_mono.shift == tkr_raw.shift */ - vdso_data->cs_shift = tk->tkr_mono.shift; - } - - smp_wmb(); - ++vdso_data->tb_seq_count; -} - -void update_vsyscall_tz(void) -{ - vdso_data->tz_minuteswest = sys_tz.tz_minuteswest; - vdso_data->tz_dsttime = sys_tz.tz_dsttime; + return ret; } diff --git a/arch/arm64/kernel/vdso/Makefile b/arch/arm64/kernel/vdso/Makefile index fa230ff09aa1..dd2514bb1511 100644 --- a/arch/arm64/kernel/vdso/Makefile +++ b/arch/arm64/kernel/vdso/Makefile @@ -6,7 +6,12 @@ # Heavily based on the vDSO Makefiles for other archs. # -obj-vdso := gettimeofday.o note.o sigreturn.o +# Absolute relocation type $(ARCH_REL_TYPE_ABS) needs to be defined before +# the inclusion of generic Makefile. +ARCH_REL_TYPE_ABS := R_AARCH64_JUMP_SLOT|R_AARCH64_GLOB_DAT|R_AARCH64_ABS64 +include $(srctree)/lib/vdso/Makefile + +obj-vdso := vgettimeofday.o note.o sigreturn.o # Build rules targets := $(obj-vdso) vdso.so vdso.so.dbg @@ -15,6 +20,31 @@ obj-vdso := $(addprefix $(obj)/, $(obj-vdso)) ldflags-y := -shared -nostdlib -soname=linux-vdso.so.1 --hash-style=sysv \ --build-id -n -T +ccflags-y := -fno-common -fno-builtin -fno-stack-protector -ffixed-x18 +ccflags-y += -DDISABLE_BRANCH_PROFILING + +VDSO_LDFLAGS := -Bsymbolic + +CFLAGS_REMOVE_vgettimeofday.o = $(CC_FLAGS_FTRACE) -Os +KBUILD_CFLAGS += $(DISABLE_LTO) +KASAN_SANITIZE := n +UBSAN_SANITIZE := n +OBJECT_FILES_NON_STANDARD := y +KCOV_INSTRUMENT := n + +CFLAGS_vgettimeofday.o = -O2 -mcmodel=tiny + +ifneq ($(c-gettimeofday-y),) + CFLAGS_vgettimeofday.o += -include $(c-gettimeofday-y) +endif + +# Clang versions less than 8 do not support -mcmodel=tiny +ifeq ($(CONFIG_CC_IS_CLANG), y) + ifeq ($(shell test $(CONFIG_CLANG_VERSION) -lt 80000; echo $$?),0) + CFLAGS_REMOVE_vgettimeofday.o += -mcmodel=tiny + endif +endif + # Disable gcov profiling for VDSO code GCOV_PROFILE := n @@ -27,7 +57,7 @@ $(obj)/vdso.o : $(obj)/vdso.so # Link rule for the .so file, .lds has to be first $(obj)/vdso.so.dbg: $(obj)/vdso.lds $(obj-vdso) FORCE - $(call if_changed,ld) + $(call if_changed,vdsold_and_vdso_check) # Strip rule for the .so file $(obj)/%.so: OBJCOPYFLAGS := -S @@ -42,13 +72,9 @@ quiet_cmd_vdsosym = VDSOSYM $@ include/generated/vdso-offsets.h: $(obj)/vdso.so.dbg FORCE $(call if_changed,vdsosym) -# Assembly rules for the .S files -$(obj-vdso): %.o: %.S FORCE - $(call if_changed_dep,vdsoas) - # Actual build commands -quiet_cmd_vdsoas = VDSOA $@ - cmd_vdsoas = $(CC) $(a_flags) -c -o $@ $< +quiet_cmd_vdsold_and_vdso_check = LD $@ + cmd_vdsold_and_vdso_check = $(cmd_ld); $(cmd_vdso_check) # Install commands for the unstripped file quiet_cmd_vdso_install = INSTALL $@ diff --git a/arch/arm64/kernel/vdso/gettimeofday.S b/arch/arm64/kernel/vdso/gettimeofday.S index 80f780f56e0d..e69de29bb2d1 100644 --- a/arch/arm64/kernel/vdso/gettimeofday.S +++ b/arch/arm64/kernel/vdso/gettimeofday.S @@ -1,323 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Userspace implementations of gettimeofday() and friends. - * - * Copyright (C) 2012 ARM Limited - * - * Author: Will Deacon <will.deacon@arm.com> - */ - -#include <linux/linkage.h> -#include <asm/asm-offsets.h> -#include <asm/unistd.h> - -#define NSEC_PER_SEC_LO16 0xca00 -#define NSEC_PER_SEC_HI16 0x3b9a - -vdso_data .req x6 -seqcnt .req w7 -w_tmp .req w8 -x_tmp .req x8 - -/* - * Conventions for macro arguments: - * - An argument is write-only if its name starts with "res". - * - All other arguments are read-only, unless otherwise specified. - */ - - .macro seqcnt_acquire -9999: ldr seqcnt, [vdso_data, #VDSO_TB_SEQ_COUNT] - tbnz seqcnt, #0, 9999b - dmb ishld - .endm - - .macro seqcnt_check fail - dmb ishld - ldr w_tmp, [vdso_data, #VDSO_TB_SEQ_COUNT] - cmp w_tmp, seqcnt - b.ne \fail - .endm - - .macro syscall_check fail - ldr w_tmp, [vdso_data, #VDSO_USE_SYSCALL] - cbnz w_tmp, \fail - .endm - - .macro get_nsec_per_sec res - mov \res, #NSEC_PER_SEC_LO16 - movk \res, #NSEC_PER_SEC_HI16, lsl #16 - .endm - - /* - * Returns the clock delta, in nanoseconds left-shifted by the clock - * shift. - */ - .macro get_clock_shifted_nsec res, cycle_last, mult - /* Read the virtual counter. */ - isb - mrs x_tmp, cntvct_el0 - /* Calculate cycle delta and convert to ns. */ - sub \res, x_tmp, \cycle_last - /* We can only guarantee 56 bits of precision. */ - movn x_tmp, #0xff00, lsl #48 - and \res, x_tmp, \res - mul \res, \res, \mult - /* - * Fake address dependency from the value computed from the counter - * register to subsequent data page accesses so that the sequence - * locking also orders the read of the counter. - */ - and x_tmp, \res, xzr - add vdso_data, vdso_data, x_tmp - .endm - - /* - * Returns in res_{sec,nsec} the REALTIME timespec, based on the - * "wall time" (xtime) and the clock_mono delta. - */ - .macro get_ts_realtime res_sec, res_nsec, \ - clock_nsec, xtime_sec, xtime_nsec, nsec_to_sec - add \res_nsec, \clock_nsec, \xtime_nsec - udiv x_tmp, \res_nsec, \nsec_to_sec - add \res_sec, \xtime_sec, x_tmp - msub \res_nsec, x_tmp, \nsec_to_sec, \res_nsec - .endm - - /* - * Returns in res_{sec,nsec} the timespec based on the clock_raw delta, - * used for CLOCK_MONOTONIC_RAW. - */ - .macro get_ts_clock_raw res_sec, res_nsec, clock_nsec, nsec_to_sec - udiv \res_sec, \clock_nsec, \nsec_to_sec - msub \res_nsec, \res_sec, \nsec_to_sec, \clock_nsec - .endm - - /* sec and nsec are modified in place. */ - .macro add_ts sec, nsec, ts_sec, ts_nsec, nsec_to_sec - /* Add timespec. */ - add \sec, \sec, \ts_sec - add \nsec, \nsec, \ts_nsec - - /* Normalise the new timespec. */ - cmp \nsec, \nsec_to_sec - b.lt 9999f - sub \nsec, \nsec, \nsec_to_sec - add \sec, \sec, #1 -9999: - cmp \nsec, #0 - b.ge 9998f - add \nsec, \nsec, \nsec_to_sec - sub \sec, \sec, #1 -9998: - .endm - - .macro clock_gettime_return, shift=0 - .if \shift == 1 - lsr x11, x11, x12 - .endif - stp x10, x11, [x1, #TSPEC_TV_SEC] - mov x0, xzr - ret - .endm - - .macro jump_slot jumptable, index, label - .if (. - \jumptable) != 4 * (\index) - .error "Jump slot index mismatch" - .endif - b \label - .endm - - .text - -/* int __kernel_gettimeofday(struct timeval *tv, struct timezone *tz); */ -ENTRY(__kernel_gettimeofday) - .cfi_startproc - adr vdso_data, _vdso_data - /* If tv is NULL, skip to the timezone code. */ - cbz x0, 2f - - /* Compute the time of day. */ -1: seqcnt_acquire - syscall_check fail=4f - ldr x10, [vdso_data, #VDSO_CS_CYCLE_LAST] - /* w11 = cs_mono_mult, w12 = cs_shift */ - ldp w11, w12, [vdso_data, #VDSO_CS_MONO_MULT] - ldp x13, x14, [vdso_data, #VDSO_XTIME_CLK_SEC] - - get_nsec_per_sec res=x9 - lsl x9, x9, x12 - - get_clock_shifted_nsec res=x15, cycle_last=x10, mult=x11 - seqcnt_check fail=1b - get_ts_realtime res_sec=x10, res_nsec=x11, \ - clock_nsec=x15, xtime_sec=x13, xtime_nsec=x14, nsec_to_sec=x9 - - /* Convert ns to us. */ - mov x13, #1000 - lsl x13, x13, x12 - udiv x11, x11, x13 - stp x10, x11, [x0, #TVAL_TV_SEC] -2: - /* If tz is NULL, return 0. */ - cbz x1, 3f - ldp w4, w5, [vdso_data, #VDSO_TZ_MINWEST] - stp w4, w5, [x1, #TZ_MINWEST] -3: - mov x0, xzr - ret -4: - /* Syscall fallback. */ - mov x8, #__NR_gettimeofday - svc #0 - ret - .cfi_endproc -ENDPROC(__kernel_gettimeofday) - -#define JUMPSLOT_MAX CLOCK_MONOTONIC_COARSE - -/* int __kernel_clock_gettime(clockid_t clock_id, struct timespec *tp); */ -ENTRY(__kernel_clock_gettime) - .cfi_startproc - cmp w0, #JUMPSLOT_MAX - b.hi syscall - adr vdso_data, _vdso_data - adr x_tmp, jumptable - add x_tmp, x_tmp, w0, uxtw #2 - br x_tmp - - ALIGN -jumptable: - jump_slot jumptable, CLOCK_REALTIME, realtime - jump_slot jumptable, CLOCK_MONOTONIC, monotonic - b syscall - b syscall - jump_slot jumptable, CLOCK_MONOTONIC_RAW, monotonic_raw - jump_slot jumptable, CLOCK_REALTIME_COARSE, realtime_coarse - jump_slot jumptable, CLOCK_MONOTONIC_COARSE, monotonic_coarse - - .if (. - jumptable) != 4 * (JUMPSLOT_MAX + 1) - .error "Wrong jumptable size" - .endif - - ALIGN -realtime: - seqcnt_acquire - syscall_check fail=syscall - ldr x10, [vdso_data, #VDSO_CS_CYCLE_LAST] - /* w11 = cs_mono_mult, w12 = cs_shift */ - ldp w11, w12, [vdso_data, #VDSO_CS_MONO_MULT] - ldp x13, x14, [vdso_data, #VDSO_XTIME_CLK_SEC] - - /* All computations are done with left-shifted nsecs. */ - get_nsec_per_sec res=x9 - lsl x9, x9, x12 - - get_clock_shifted_nsec res=x15, cycle_last=x10, mult=x11 - seqcnt_check fail=realtime - get_ts_realtime res_sec=x10, res_nsec=x11, \ - clock_nsec=x15, xtime_sec=x13, xtime_nsec=x14, nsec_to_sec=x9 - clock_gettime_return, shift=1 - - ALIGN -monotonic: - seqcnt_acquire - syscall_check fail=syscall - ldr x10, [vdso_data, #VDSO_CS_CYCLE_LAST] - /* w11 = cs_mono_mult, w12 = cs_shift */ - ldp w11, w12, [vdso_data, #VDSO_CS_MONO_MULT] - ldp x13, x14, [vdso_data, #VDSO_XTIME_CLK_SEC] - ldp x3, x4, [vdso_data, #VDSO_WTM_CLK_SEC] - - /* All computations are done with left-shifted nsecs. */ - lsl x4, x4, x12 - get_nsec_per_sec res=x9 - lsl x9, x9, x12 - - get_clock_shifted_nsec res=x15, cycle_last=x10, mult=x11 - seqcnt_check fail=monotonic - get_ts_realtime res_sec=x10, res_nsec=x11, \ - clock_nsec=x15, xtime_sec=x13, xtime_nsec=x14, nsec_to_sec=x9 - - add_ts sec=x10, nsec=x11, ts_sec=x3, ts_nsec=x4, nsec_to_sec=x9 - clock_gettime_return, shift=1 - - ALIGN -monotonic_raw: - seqcnt_acquire - syscall_check fail=syscall - ldr x10, [vdso_data, #VDSO_CS_CYCLE_LAST] - /* w11 = cs_raw_mult, w12 = cs_shift */ - ldp w12, w11, [vdso_data, #VDSO_CS_SHIFT] - ldp x13, x14, [vdso_data, #VDSO_RAW_TIME_SEC] - - /* All computations are done with left-shifted nsecs. */ - get_nsec_per_sec res=x9 - lsl x9, x9, x12 - - get_clock_shifted_nsec res=x15, cycle_last=x10, mult=x11 - seqcnt_check fail=monotonic_raw - get_ts_clock_raw res_sec=x10, res_nsec=x11, \ - clock_nsec=x15, nsec_to_sec=x9 - - add_ts sec=x10, nsec=x11, ts_sec=x13, ts_nsec=x14, nsec_to_sec=x9 - clock_gettime_return, shift=1 - - ALIGN -realtime_coarse: - seqcnt_acquire - ldp x10, x11, [vdso_data, #VDSO_XTIME_CRS_SEC] - seqcnt_check fail=realtime_coarse - clock_gettime_return - - ALIGN -monotonic_coarse: - seqcnt_acquire - ldp x10, x11, [vdso_data, #VDSO_XTIME_CRS_SEC] - ldp x13, x14, [vdso_data, #VDSO_WTM_CLK_SEC] - seqcnt_check fail=monotonic_coarse - - /* Computations are done in (non-shifted) nsecs. */ - get_nsec_per_sec res=x9 - add_ts sec=x10, nsec=x11, ts_sec=x13, ts_nsec=x14, nsec_to_sec=x9 - clock_gettime_return - - ALIGN -syscall: /* Syscall fallback. */ - mov x8, #__NR_clock_gettime - svc #0 - ret - .cfi_endproc -ENDPROC(__kernel_clock_gettime) - -/* int __kernel_clock_getres(clockid_t clock_id, struct timespec *res); */ -ENTRY(__kernel_clock_getres) - .cfi_startproc - cmp w0, #CLOCK_REALTIME - ccmp w0, #CLOCK_MONOTONIC, #0x4, ne - ccmp w0, #CLOCK_MONOTONIC_RAW, #0x4, ne - b.ne 1f - - adr vdso_data, _vdso_data - ldr w2, [vdso_data, #CLOCK_REALTIME_RES] - b 2f -1: - cmp w0, #CLOCK_REALTIME_COARSE - ccmp w0, #CLOCK_MONOTONIC_COARSE, #0x4, ne - b.ne 4f - ldr x2, 5f -2: - cbz x1, 3f - stp xzr, x2, [x1] - -3: /* res == NULL. */ - mov w0, wzr - ret - -4: /* Syscall fallback. */ - mov x8, #__NR_clock_getres - svc #0 - ret -5: - .quad CLOCK_COARSE_RES - .cfi_endproc -ENDPROC(__kernel_clock_getres) diff --git a/arch/arm64/kernel/vdso/vgettimeofday.c b/arch/arm64/kernel/vdso/vgettimeofday.c new file mode 100644 index 000000000000..747635501a14 --- /dev/null +++ b/arch/arm64/kernel/vdso/vgettimeofday.c @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * ARM64 userspace implementations of gettimeofday() and similar. + * + * Copyright (C) 2018 ARM Limited + * + */ +#include <linux/time.h> +#include <linux/types.h> + +int __kernel_clock_gettime(clockid_t clock, + struct __kernel_timespec *ts) +{ + return __cvdso_clock_gettime(clock, ts); +} + +int __kernel_gettimeofday(struct __kernel_old_timeval *tv, + struct timezone *tz) +{ + return __cvdso_gettimeofday(tv, tz); +} + +int __kernel_clock_getres(clockid_t clock_id, + struct __kernel_timespec *res) +{ + return __cvdso_clock_getres(clock_id, res); +} diff --git a/arch/arm64/kernel/vdso32/.gitignore b/arch/arm64/kernel/vdso32/.gitignore new file mode 100644 index 000000000000..4fea950fa5ed --- /dev/null +++ b/arch/arm64/kernel/vdso32/.gitignore @@ -0,0 +1,2 @@ +vdso.lds +vdso.so.raw diff --git a/arch/arm64/kernel/vdso32/Makefile b/arch/arm64/kernel/vdso32/Makefile new file mode 100644 index 000000000000..1fba0776ed40 --- /dev/null +++ b/arch/arm64/kernel/vdso32/Makefile @@ -0,0 +1,188 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Makefile for vdso32 +# + +# Absolute relocation type $(ARCH_REL_TYPE_ABS) needs to be defined before +# the inclusion of generic Makefile. +ARCH_REL_TYPE_ABS := R_ARM_JUMP_SLOT|R_ARM_GLOB_DAT|R_ARM_ABS32 +include $(srctree)/lib/vdso/Makefile + +COMPATCC := $(CROSS_COMPILE_COMPAT)gcc + +# Same as cc-*option, but using COMPATCC instead of CC +cc32-option = $(call try-run,\ + $(COMPATCC) $(1) -c -x c /dev/null -o "$$TMP",$(1),$(2)) +cc32-disable-warning = $(call try-run,\ + $(COMPATCC) -W$(strip $(1)) -c -x c /dev/null -o "$$TMP",-Wno-$(strip $(1))) +cc32-ldoption = $(call try-run,\ + $(COMPATCC) $(1) -nostdlib -x c /dev/null -o "$$TMP",$(1),$(2)) + +# We cannot use the global flags to compile the vDSO files, the main reason +# being that the 32-bit compiler may be older than the main (64-bit) compiler +# and therefore may not understand flags set using $(cc-option ...). Besides, +# arch-specific options should be taken from the arm Makefile instead of the +# arm64 one. +# As a result we set our own flags here. + +# From top-level Makefile +# NOSTDINC_FLAGS +VDSO_CPPFLAGS := -nostdinc -isystem $(shell $(COMPATCC) -print-file-name=include) +VDSO_CPPFLAGS += $(LINUXINCLUDE) +VDSO_CPPFLAGS += $(KBUILD_CPPFLAGS) + +# Common C and assembly flags +# From top-level Makefile +VDSO_CAFLAGS := $(VDSO_CPPFLAGS) +VDSO_CAFLAGS += $(call cc32-option,-fno-PIE) +ifdef CONFIG_DEBUG_INFO +VDSO_CAFLAGS += -g +endif +ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-goto.sh $(COMPATCC)), y) +VDSO_CAFLAGS += -DCC_HAVE_ASM_GOTO +endif + +# From arm Makefile +VDSO_CAFLAGS += $(call cc32-option,-fno-dwarf2-cfi-asm) +VDSO_CAFLAGS += -mabi=aapcs-linux -mfloat-abi=soft +ifeq ($(CONFIG_CPU_BIG_ENDIAN), y) +VDSO_CAFLAGS += -mbig-endian +else +VDSO_CAFLAGS += -mlittle-endian +endif + +# From arm vDSO Makefile +VDSO_CAFLAGS += -fPIC -fno-builtin -fno-stack-protector +VDSO_CAFLAGS += -DDISABLE_BRANCH_PROFILING + +# Try to compile for ARMv8. If the compiler is too old and doesn't support it, +# fall back to v7. There is no easy way to check for what architecture the code +# is being compiled, so define a macro specifying that (see arch/arm/Makefile). +VDSO_CAFLAGS += $(call cc32-option,-march=armv8-a -D__LINUX_ARM_ARCH__=8,\ + -march=armv7-a -D__LINUX_ARM_ARCH__=7) + +VDSO_CFLAGS := $(VDSO_CAFLAGS) +VDSO_CFLAGS += -DENABLE_COMPAT_VDSO=1 +# KBUILD_CFLAGS from top-level Makefile +VDSO_CFLAGS += -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \ + -fno-strict-aliasing -fno-common \ + -Werror-implicit-function-declaration \ + -Wno-format-security \ + -std=gnu89 +VDSO_CFLAGS += -O2 +# Some useful compiler-dependent flags from top-level Makefile +VDSO_CFLAGS += $(call cc32-option,-Wdeclaration-after-statement,) +VDSO_CFLAGS += $(call cc32-option,-Wno-pointer-sign) +VDSO_CFLAGS += $(call cc32-option,-fno-strict-overflow) +VDSO_CFLAGS += $(call cc32-option,-Werror=strict-prototypes) +VDSO_CFLAGS += $(call cc32-option,-Werror=date-time) +VDSO_CFLAGS += $(call cc32-option,-Werror=incompatible-pointer-types) + +# The 32-bit compiler does not provide 128-bit integers, which are used in +# some headers that are indirectly included from the vDSO code. +# This hack makes the compiler happy and should trigger a warning/error if +# variables of such type are referenced. +VDSO_CFLAGS += -D__uint128_t='void*' +# Silence some warnings coming from headers that operate on long's +# (on GCC 4.8 or older, there is unfortunately no way to silence this warning) +VDSO_CFLAGS += $(call cc32-disable-warning,shift-count-overflow) +VDSO_CFLAGS += -Wno-int-to-pointer-cast + +VDSO_AFLAGS := $(VDSO_CAFLAGS) +VDSO_AFLAGS += -D__ASSEMBLY__ + +VDSO_LDFLAGS := $(VDSO_CPPFLAGS) +# From arm vDSO Makefile +VDSO_LDFLAGS += -Wl,-Bsymbolic -Wl,--no-undefined -Wl,-soname=linux-vdso.so.1 +VDSO_LDFLAGS += -Wl,-z,max-page-size=4096 -Wl,-z,common-page-size=4096 +VDSO_LDFLAGS += -nostdlib -shared -mfloat-abi=soft +VDSO_LDFLAGS += -Wl,--hash-style=sysv +VDSO_LDFLAGS += -Wl,--build-id +VDSO_LDFLAGS += $(call cc32-ldoption,-fuse-ld=bfd) + + +# Borrow vdsomunge.c from the arm vDSO +# We have to use a relative path because scripts/Makefile.host prefixes +# $(hostprogs-y) with $(obj) +munge := ../../../arm/vdso/vdsomunge +hostprogs-y := $(munge) + +c-obj-vdso := note.o +c-obj-vdso-gettimeofday := vgettimeofday.o +asm-obj-vdso := sigreturn.o + +ifneq ($(c-gettimeofday-y),) +VDSO_CFLAGS_gettimeofday_o += -include $(c-gettimeofday-y) +endif + +VDSO_CFLAGS_REMOVE_vgettimeofday.o = $(CC_FLAGS_FTRACE) -Os + +# Build rules +targets := $(c-obj-vdso) $(c-obj-vdso-gettimeofday) $(asm-obj-vdso) vdso.so vdso.so.dbg vdso.so.raw +c-obj-vdso := $(addprefix $(obj)/, $(c-obj-vdso)) +c-obj-vdso-gettimeofday := $(addprefix $(obj)/, $(c-obj-vdso-gettimeofday)) +asm-obj-vdso := $(addprefix $(obj)/, $(asm-obj-vdso)) +obj-vdso := $(c-obj-vdso) $(c-obj-vdso-gettimeofday) $(asm-obj-vdso) + +obj-y += vdso.o +extra-y += vdso.lds +CPPFLAGS_vdso.lds += -P -C -U$(ARCH) + +# Force dependency (vdso.s includes vdso.so through incbin) +$(obj)/vdso.o: $(obj)/vdso.so + +include/generated/vdso32-offsets.h: $(obj)/vdso.so.dbg FORCE + $(call if_changed,vdsosym) + +# Strip rule for vdso.so +$(obj)/vdso.so: OBJCOPYFLAGS := -S +$(obj)/vdso.so: $(obj)/vdso.so.dbg FORCE + $(call if_changed,objcopy) + +$(obj)/vdso.so.dbg: $(obj)/vdso.so.raw $(obj)/$(munge) FORCE + $(call if_changed,vdsomunge) + +# Link rule for the .so file, .lds has to be first +$(obj)/vdso.so.raw: $(src)/vdso.lds $(obj-vdso) FORCE + $(call if_changed,vdsold_and_vdso_check) + +# Compilation rules for the vDSO sources +$(c-obj-vdso): %.o: %.c FORCE + $(call if_changed_dep,vdsocc) +$(c-obj-vdso-gettimeofday): %.o: %.c FORCE + $(call if_changed_dep,vdsocc_gettimeofday) +$(asm-obj-vdso): %.o: %.S FORCE + $(call if_changed_dep,vdsoas) + +# Actual build commands +quiet_cmd_vdsold_and_vdso_check = LD32 $@ + cmd_vdsold_and_vdso_check = $(cmd_vdsold); $(cmd_vdso_check) + +quiet_cmd_vdsold = LD32 $@ + cmd_vdsold = $(COMPATCC) -Wp,-MD,$(depfile) $(VDSO_LDFLAGS) \ + -Wl,-T $(filter %.lds,$^) $(filter %.o,$^) -o $@ +quiet_cmd_vdsocc = CC32 $@ + cmd_vdsocc = $(COMPATCC) -Wp,-MD,$(depfile) $(VDSO_CFLAGS) -c -o $@ $< +quiet_cmd_vdsocc_gettimeofday = CC32 $@ + cmd_vdsocc_gettimeofday = $(COMPATCC) -Wp,-MD,$(depfile) $(VDSO_CFLAGS) $(VDSO_CFLAGS_gettimeofday_o) -c -o $@ $< +quiet_cmd_vdsoas = AS32 $@ + cmd_vdsoas = $(COMPATCC) -Wp,-MD,$(depfile) $(VDSO_AFLAGS) -c -o $@ $< + +quiet_cmd_vdsomunge = MUNGE $@ + cmd_vdsomunge = $(obj)/$(munge) $< $@ + +# Generate vDSO offsets using helper script (borrowed from the 64-bit vDSO) +gen-vdsosym := $(srctree)/$(src)/../vdso/gen_vdso_offsets.sh +quiet_cmd_vdsosym = VDSOSYM $@ +# The AArch64 nm should be able to read an AArch32 binary + cmd_vdsosym = $(NM) $< | $(gen-vdsosym) | LC_ALL=C sort > $@ + +# Install commands for the unstripped file +quiet_cmd_vdso_install = INSTALL $@ + cmd_vdso_install = cp $(obj)/$@.dbg $(MODLIB)/vdso/vdso32.so + +vdso.so: $(obj)/vdso.so.dbg + @mkdir -p $(MODLIB)/vdso + $(call cmd,vdso_install) + +vdso_install: vdso.so diff --git a/arch/arm64/kernel/vdso32/note.c b/arch/arm64/kernel/vdso32/note.c new file mode 100644 index 000000000000..eff5bf9efb8b --- /dev/null +++ b/arch/arm64/kernel/vdso32/note.c @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2012-2018 ARM Limited + * + * This supplies .note.* sections to go into the PT_NOTE inside the vDSO text. + * Here we can supply some information useful to userland. + */ + +#include <linux/uts.h> +#include <linux/version.h> +#include <linux/elfnote.h> +#include <linux/build-salt.h> + +ELFNOTE32("Linux", 0, LINUX_VERSION_CODE); +BUILD_SALT; diff --git a/arch/arm64/kernel/vdso32/sigreturn.S b/arch/arm64/kernel/vdso32/sigreturn.S new file mode 100644 index 000000000000..1a81277c2d09 --- /dev/null +++ b/arch/arm64/kernel/vdso32/sigreturn.S @@ -0,0 +1,62 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * This file provides both A32 and T32 versions, in accordance with the + * arm sigreturn code. + * + * Copyright (C) 2018 ARM Limited + */ + +#include <linux/linkage.h> +#include <asm/asm-offsets.h> +#include <asm/unistd.h> + +#define ARM_ENTRY(name) \ + ENTRY(name) + +#define ARM_ENDPROC(name) \ + .type name, %function; \ + END(name) + + .text + + .arm + .fnstart + .save {r0-r15} + .pad #COMPAT_SIGFRAME_REGS_OFFSET + nop +ARM_ENTRY(__kernel_sigreturn_arm) + mov r7, #__NR_compat_sigreturn + svc #0 + .fnend +ARM_ENDPROC(__kernel_sigreturn_arm) + + .fnstart + .save {r0-r15} + .pad #COMPAT_RT_SIGFRAME_REGS_OFFSET + nop +ARM_ENTRY(__kernel_rt_sigreturn_arm) + mov r7, #__NR_compat_rt_sigreturn + svc #0 + .fnend +ARM_ENDPROC(__kernel_rt_sigreturn_arm) + + .thumb + .fnstart + .save {r0-r15} + .pad #COMPAT_SIGFRAME_REGS_OFFSET + nop +ARM_ENTRY(__kernel_sigreturn_thumb) + mov r7, #__NR_compat_sigreturn + svc #0 + .fnend +ARM_ENDPROC(__kernel_sigreturn_thumb) + + .fnstart + .save {r0-r15} + .pad #COMPAT_RT_SIGFRAME_REGS_OFFSET + nop +ARM_ENTRY(__kernel_rt_sigreturn_thumb) + mov r7, #__NR_compat_rt_sigreturn + svc #0 + .fnend +ARM_ENDPROC(__kernel_rt_sigreturn_thumb) diff --git a/arch/arm64/kernel/vdso32/vdso.S b/arch/arm64/kernel/vdso32/vdso.S new file mode 100644 index 000000000000..e72ac7bc4c04 --- /dev/null +++ b/arch/arm64/kernel/vdso32/vdso.S @@ -0,0 +1,19 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2012 ARM Limited + */ + +#include <linux/init.h> +#include <linux/linkage.h> +#include <linux/const.h> +#include <asm/page.h> + + .globl vdso32_start, vdso32_end + .section .rodata + .balign PAGE_SIZE +vdso32_start: + .incbin "arch/arm64/kernel/vdso32/vdso.so" + .balign PAGE_SIZE +vdso32_end: + + .previous diff --git a/arch/arm64/kernel/vdso32/vdso.lds.S b/arch/arm64/kernel/vdso32/vdso.lds.S new file mode 100644 index 000000000000..a3944927eaeb --- /dev/null +++ b/arch/arm64/kernel/vdso32/vdso.lds.S @@ -0,0 +1,82 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Adapted from arm64 version. + * + * GNU linker script for the VDSO library. + * Heavily based on the vDSO linker scripts for other archs. + * + * Copyright (C) 2012-2018 ARM Limited + */ + +#include <linux/const.h> +#include <asm/page.h> +#include <asm/vdso.h> + +OUTPUT_FORMAT("elf32-littlearm", "elf32-bigarm", "elf32-littlearm") +OUTPUT_ARCH(arm) + +SECTIONS +{ + PROVIDE_HIDDEN(_vdso_data = . - PAGE_SIZE); + . = VDSO_LBASE + SIZEOF_HEADERS; + + .hash : { *(.hash) } :text + .gnu.hash : { *(.gnu.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .gnu.version : { *(.gnu.version) } + .gnu.version_d : { *(.gnu.version_d) } + .gnu.version_r : { *(.gnu.version_r) } + + .note : { *(.note.*) } :text :note + + .dynamic : { *(.dynamic) } :text :dynamic + + .rodata : { *(.rodata*) } :text + + .text : { *(.text*) } :text =0xe7f001f2 + + .got : { *(.got) } + .rel.plt : { *(.rel.plt) } + + /DISCARD/ : { + *(.note.GNU-stack) + *(.data .data.* .gnu.linkonce.d.* .sdata*) + *(.bss .sbss .dynbss .dynsbss) + } +} + +/* + * We must supply the ELF program headers explicitly to get just one + * PT_LOAD segment, and set the flags explicitly to make segments read-only. + */ +PHDRS +{ + text PT_LOAD FLAGS(5) FILEHDR PHDRS; /* PF_R|PF_X */ + dynamic PT_DYNAMIC FLAGS(4); /* PF_R */ + note PT_NOTE FLAGS(4); /* PF_R */ +} + +VERSION +{ + LINUX_2.6 { + global: + __vdso_clock_gettime; + __vdso_gettimeofday; + __vdso_clock_getres; + __kernel_sigreturn_arm; + __kernel_sigreturn_thumb; + __kernel_rt_sigreturn_arm; + __kernel_rt_sigreturn_thumb; + __vdso_clock_gettime64; + local: *; + }; +} + +/* + * Make the sigreturn code visible to the kernel. + */ +VDSO_compat_sigreturn_arm = __kernel_sigreturn_arm; +VDSO_compat_sigreturn_thumb = __kernel_sigreturn_thumb; +VDSO_compat_rt_sigreturn_arm = __kernel_rt_sigreturn_arm; +VDSO_compat_rt_sigreturn_thumb = __kernel_rt_sigreturn_thumb; diff --git a/arch/arm64/kernel/vdso32/vgettimeofday.c b/arch/arm64/kernel/vdso32/vgettimeofday.c new file mode 100644 index 000000000000..54fc1c2ce93f --- /dev/null +++ b/arch/arm64/kernel/vdso32/vgettimeofday.c @@ -0,0 +1,59 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * ARM64 compat userspace implementations of gettimeofday() and similar. + * + * Copyright (C) 2018 ARM Limited + * + */ +#include <linux/time.h> +#include <linux/types.h> + +int __vdso_clock_gettime(clockid_t clock, + struct old_timespec32 *ts) +{ + /* The checks below are required for ABI consistency with arm */ + if ((u32)ts >= TASK_SIZE_32) + return -EFAULT; + + return __cvdso_clock_gettime32(clock, ts); +} + +int __vdso_clock_gettime64(clockid_t clock, + struct __kernel_timespec *ts) +{ + /* The checks below are required for ABI consistency with arm */ + if ((u32)ts >= TASK_SIZE_32) + return -EFAULT; + + return __cvdso_clock_gettime(clock, ts); +} + +int __vdso_gettimeofday(struct __kernel_old_timeval *tv, + struct timezone *tz) +{ + return __cvdso_gettimeofday(tv, tz); +} + +int __vdso_clock_getres(clockid_t clock_id, + struct old_timespec32 *res) +{ + /* The checks below are required for ABI consistency with arm */ + if ((u32)res >= TASK_SIZE_32) + return -EFAULT; + + return __cvdso_clock_getres_time32(clock_id, res); +} + +/* Avoid unresolved references emitted by GCC */ + +void __aeabi_unwind_cpp_pr0(void) +{ +} + +void __aeabi_unwind_cpp_pr1(void) +{ +} + +void __aeabi_unwind_cpp_pr2(void) +{ +} diff --git a/arch/arm64/kernel/vmlinux.lds.S b/arch/arm64/kernel/vmlinux.lds.S index 7fa008374907..aa76f7259668 100644 --- a/arch/arm64/kernel/vmlinux.lds.S +++ b/arch/arm64/kernel/vmlinux.lds.S @@ -200,6 +200,15 @@ SECTIONS __rela_offset = ABSOLUTE(ADDR(.rela.dyn) - KIMAGE_VADDR); __rela_size = SIZEOF(.rela.dyn); +#ifdef CONFIG_RELR + .relr.dyn : ALIGN(8) { + *(.relr.dyn) + } + + __relr_offset = ABSOLUTE(ADDR(.relr.dyn) - KIMAGE_VADDR); + __relr_size = SIZEOF(.relr.dyn); +#endif + . = ALIGN(SEGMENT_ALIGN); __initdata_end = .; __init_end = .; @@ -245,6 +254,8 @@ SECTIONS HEAD_SYMBOLS } +#include "image-vars.h" + /* * The HYP init code and ID map text can't be longer than a page each, * and should not cross a page boundary. diff --git a/arch/arm64/kvm/fpsimd.c b/arch/arm64/kvm/fpsimd.c index 6e3c9c8b2df9..525010504f9d 100644 --- a/arch/arm64/kvm/fpsimd.c +++ b/arch/arm64/kvm/fpsimd.c @@ -112,9 +112,7 @@ void kvm_arch_vcpu_put_fp(struct kvm_vcpu *vcpu) if (vcpu->arch.flags & KVM_ARM64_FP_ENABLED) { u64 *guest_zcr = &vcpu->arch.ctxt.sys_regs[ZCR_EL1]; - /* Clean guest FP state to memory and invalidate cpu view */ - fpsimd_save(); - fpsimd_flush_cpu_state(); + fpsimd_save_and_flush_cpu_state(); if (guest_has_sve) *guest_zcr = read_sysreg_s(SYS_ZCR_EL12); diff --git a/arch/arm64/kvm/hyp/debug-sr.c b/arch/arm64/kvm/hyp/debug-sr.c index 26781da3ad3e..0fc9872a1467 100644 --- a/arch/arm64/kvm/hyp/debug-sr.c +++ b/arch/arm64/kvm/hyp/debug-sr.c @@ -18,40 +18,70 @@ #define save_debug(ptr,reg,nr) \ switch (nr) { \ case 15: ptr[15] = read_debug(reg, 15); \ + /* Fall through */ \ case 14: ptr[14] = read_debug(reg, 14); \ + /* Fall through */ \ case 13: ptr[13] = read_debug(reg, 13); \ + /* Fall through */ \ case 12: ptr[12] = read_debug(reg, 12); \ + /* Fall through */ \ case 11: ptr[11] = read_debug(reg, 11); \ + /* Fall through */ \ case 10: ptr[10] = read_debug(reg, 10); \ + /* Fall through */ \ case 9: ptr[9] = read_debug(reg, 9); \ + /* Fall through */ \ case 8: ptr[8] = read_debug(reg, 8); \ + /* Fall through */ \ case 7: ptr[7] = read_debug(reg, 7); \ + /* Fall through */ \ case 6: ptr[6] = read_debug(reg, 6); \ + /* Fall through */ \ case 5: ptr[5] = read_debug(reg, 5); \ + /* Fall through */ \ case 4: ptr[4] = read_debug(reg, 4); \ + /* Fall through */ \ case 3: ptr[3] = read_debug(reg, 3); \ + /* Fall through */ \ case 2: ptr[2] = read_debug(reg, 2); \ + /* Fall through */ \ case 1: ptr[1] = read_debug(reg, 1); \ + /* Fall through */ \ default: ptr[0] = read_debug(reg, 0); \ } #define restore_debug(ptr,reg,nr) \ switch (nr) { \ case 15: write_debug(ptr[15], reg, 15); \ + /* Fall through */ \ case 14: write_debug(ptr[14], reg, 14); \ + /* Fall through */ \ case 13: write_debug(ptr[13], reg, 13); \ + /* Fall through */ \ case 12: write_debug(ptr[12], reg, 12); \ + /* Fall through */ \ case 11: write_debug(ptr[11], reg, 11); \ + /* Fall through */ \ case 10: write_debug(ptr[10], reg, 10); \ + /* Fall through */ \ case 9: write_debug(ptr[9], reg, 9); \ + /* Fall through */ \ case 8: write_debug(ptr[8], reg, 8); \ + /* Fall through */ \ case 7: write_debug(ptr[7], reg, 7); \ + /* Fall through */ \ case 6: write_debug(ptr[6], reg, 6); \ + /* Fall through */ \ case 5: write_debug(ptr[5], reg, 5); \ + /* Fall through */ \ case 4: write_debug(ptr[4], reg, 4); \ + /* Fall through */ \ case 3: write_debug(ptr[3], reg, 3); \ + /* Fall through */ \ case 2: write_debug(ptr[2], reg, 2); \ + /* Fall through */ \ case 1: write_debug(ptr[1], reg, 1); \ + /* Fall through */ \ default: write_debug(ptr[0], reg, 0); \ } diff --git a/arch/arm64/kvm/hyp/entry.S b/arch/arm64/kvm/hyp/entry.S index bd34016354ba..e5cc8d66bf53 100644 --- a/arch/arm64/kvm/hyp/entry.S +++ b/arch/arm64/kvm/hyp/entry.S @@ -6,6 +6,7 @@ #include <linux/linkage.h> +#include <asm/alternative.h> #include <asm/asm-offsets.h> #include <asm/assembler.h> #include <asm/fpsimdmacros.h> @@ -52,6 +53,20 @@ ENTRY(__guest_enter) // Store the host regs save_callee_saved_regs x1 + // Now the host state is stored if we have a pending RAS SError it must + // affect the host. If any asynchronous exception is pending we defer + // the guest entry. The DSB isn't necessary before v8.2 as any SError + // would be fatal. +alternative_if ARM64_HAS_RAS_EXTN + dsb nshst + isb +alternative_else_nop_endif + mrs x1, isr_el1 + cbz x1, 1f + mov x0, #ARM_EXCEPTION_IRQ + ret + +1: add x18, x0, #VCPU_CONTEXT // Macro ptrauth_switch_to_guest format: @@ -127,8 +142,8 @@ ENTRY(__guest_exit) alternative_if ARM64_HAS_RAS_EXTN // If we have the RAS extensions we can consume a pending error - // without an unmask-SError and isb. - esb + // without an unmask-SError and isb. The ESB-instruction consumed any + // pending guest error when we took the exception from the guest. mrs_s x2, SYS_DISR_EL1 str x2, [x1, #(VCPU_FAULT_DISR - VCPU_CONTEXT)] cbz x2, 1f @@ -136,8 +151,16 @@ alternative_if ARM64_HAS_RAS_EXTN orr x0, x0, #(1<<ARM_EXIT_WITH_SERROR_BIT) 1: ret alternative_else - // If we have a pending asynchronous abort, now is the - // time to find out. From your VAXorcist book, page 666: + dsb sy // Synchronize against in-flight ld/st + isb // Prevent an early read of side-effect free ISR + mrs x2, isr_el1 + tbnz x2, #8, 2f // ISR_EL1.A + ret + nop +2: +alternative_endif + // We know we have a pending asynchronous abort, now is the + // time to flush it out. From your VAXorcist book, page 666: // "Threaten me not, oh Evil one! For I speak with // the power of DEC, and I command thee to show thyself!" mrs x2, elr_el2 @@ -145,10 +168,7 @@ alternative_else mrs x4, spsr_el2 mov x5, x0 - dsb sy // Synchronize against in-flight ld/st - nop msr daifclr, #4 // Unmask aborts -alternative_endif // This is our single instruction exception window. A pending // SError is guaranteed to occur at the earliest when we unmask @@ -161,6 +181,8 @@ abort_guest_exit_start: .global abort_guest_exit_end abort_guest_exit_end: + msr daifset, #4 // Mask aborts + // If the exception took place, restore the EL1 exception // context so that we can report some information. // Merge the exception code with the SError pending bit. diff --git a/arch/arm64/kvm/hyp/hyp-entry.S b/arch/arm64/kvm/hyp/hyp-entry.S index b8e045615961..ffa68d5713f1 100644 --- a/arch/arm64/kvm/hyp/hyp-entry.S +++ b/arch/arm64/kvm/hyp/hyp-entry.S @@ -216,17 +216,34 @@ ENDPROC(\label) .align 11 +.macro check_preamble_length start, end +/* kvm_patch_vector_branch() generates code that jumps over the preamble. */ +.if ((\end-\start) != KVM_VECTOR_PREAMBLE) + .error "KVM vector preamble length mismatch" +.endif +.endm + .macro valid_vect target .align 7 +661: + esb stp x0, x1, [sp, #-16]! +662: b \target + +check_preamble_length 661b, 662b .endm .macro invalid_vect target .align 7 +661: b \target + nop +662: ldp x0, x1, [sp], #16 b \target + +check_preamble_length 661b, 662b .endm ENTRY(__kvm_hyp_vector) @@ -254,13 +271,14 @@ ENDPROC(__kvm_hyp_vector) #ifdef CONFIG_KVM_INDIRECT_VECTORS .macro hyp_ventry .align 7 -1: .rept 27 +1: esb + .rept 26 nop .endr /* * The default sequence is to directly branch to the KVM vectors, * using the computed offset. This applies for VHE as well as - * !ARM64_HARDEN_EL2_VECTORS. + * !ARM64_HARDEN_EL2_VECTORS. The first vector must always run the preamble. * * For ARM64_HARDEN_EL2_VECTORS configurations, this gets replaced * with: @@ -271,12 +289,13 @@ ENDPROC(__kvm_hyp_vector) * movk x0, #((addr >> 32) & 0xffff), lsl #32 * br x0 * - * Where addr = kern_hyp_va(__kvm_hyp_vector) + vector-offset + 4. + * Where: + * addr = kern_hyp_va(__kvm_hyp_vector) + vector-offset + KVM_VECTOR_PREAMBLE. * See kvm_patch_vector_branch for details. */ alternative_cb kvm_patch_vector_branch - b __kvm_hyp_vector + (1b - 0b) - nop + stp x0, x1, [sp, #-16]! + b __kvm_hyp_vector + (1b - 0b + KVM_VECTOR_PREAMBLE) nop nop nop @@ -301,6 +320,7 @@ ENTRY(__bp_harden_hyp_vecs_end) .popsection ENTRY(__smccc_workaround_1_smc_start) + esb sub sp, sp, #(8 * 4) stp x2, x3, [sp, #(8 * 0)] stp x0, x1, [sp, #(8 * 2)] diff --git a/arch/arm64/kvm/hyp/switch.c b/arch/arm64/kvm/hyp/switch.c index b0041812bca9..bd978ad71936 100644 --- a/arch/arm64/kvm/hyp/switch.c +++ b/arch/arm64/kvm/hyp/switch.c @@ -264,7 +264,7 @@ static bool __hyp_text __translate_far_to_hpfar(u64 far, u64 *hpfar) tmp = read_sysreg(par_el1); write_sysreg(par, par_el1); - if (unlikely(tmp & 1)) + if (unlikely(tmp & SYS_PAR_EL1_F)) return false; /* Translation failed, back to guest */ /* Convert PAR to HPFAR format */ @@ -284,7 +284,7 @@ static bool __hyp_text __populate_fault_info(struct kvm_vcpu *vcpu) if (ec != ESR_ELx_EC_DABT_LOW && ec != ESR_ELx_EC_IABT_LOW) return true; - far = read_sysreg_el2(far); + far = read_sysreg_el2(SYS_FAR); /* * The HPFAR can be invalid if the stage 2 fault did not @@ -401,7 +401,7 @@ static bool __hyp_text __hyp_handle_fpsimd(struct kvm_vcpu *vcpu) static bool __hyp_text fixup_guest_exit(struct kvm_vcpu *vcpu, u64 *exit_code) { if (ARM_EXCEPTION_CODE(*exit_code) != ARM_EXCEPTION_IRQ) - vcpu->arch.fault.esr_el2 = read_sysreg_el2(esr); + vcpu->arch.fault.esr_el2 = read_sysreg_el2(SYS_ESR); /* * We're using the raw exception code in order to only process @@ -604,7 +604,7 @@ int __hyp_text __kvm_vcpu_run_nvhe(struct kvm_vcpu *vcpu) * Naturally, we want to avoid this. */ if (system_uses_irq_prio_masking()) { - gic_write_pmr(GIC_PRIO_IRQON); + gic_write_pmr(GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET); dsb(sy); } @@ -697,8 +697,8 @@ static void __hyp_text __hyp_call_panic_nvhe(u64 spsr, u64 elr, u64 par, asm volatile("ldr %0, =__hyp_panic_string" : "=r" (str_va)); __hyp_do_panic(str_va, - spsr, elr, - read_sysreg(esr_el2), read_sysreg_el2(far), + spsr, elr, + read_sysreg(esr_el2), read_sysreg_el2(SYS_FAR), read_sysreg(hpfar_el2), par, vcpu); } @@ -713,15 +713,15 @@ static void __hyp_call_panic_vhe(u64 spsr, u64 elr, u64 par, panic(__hyp_panic_string, spsr, elr, - read_sysreg_el2(esr), read_sysreg_el2(far), + read_sysreg_el2(SYS_ESR), read_sysreg_el2(SYS_FAR), read_sysreg(hpfar_el2), par, vcpu); } NOKPROBE_SYMBOL(__hyp_call_panic_vhe); void __hyp_text __noreturn hyp_panic(struct kvm_cpu_context *host_ctxt) { - u64 spsr = read_sysreg_el2(spsr); - u64 elr = read_sysreg_el2(elr); + u64 spsr = read_sysreg_el2(SYS_SPSR); + u64 elr = read_sysreg_el2(SYS_ELR); u64 par = read_sysreg(par_el1); if (!has_vhe()) diff --git a/arch/arm64/kvm/hyp/sysreg-sr.c b/arch/arm64/kvm/hyp/sysreg-sr.c index c283f7cbc702..7ddbc849b580 100644 --- a/arch/arm64/kvm/hyp/sysreg-sr.c +++ b/arch/arm64/kvm/hyp/sysreg-sr.c @@ -43,33 +43,33 @@ static void __hyp_text __sysreg_save_user_state(struct kvm_cpu_context *ctxt) static void __hyp_text __sysreg_save_el1_state(struct kvm_cpu_context *ctxt) { ctxt->sys_regs[CSSELR_EL1] = read_sysreg(csselr_el1); - ctxt->sys_regs[SCTLR_EL1] = read_sysreg_el1(sctlr); + ctxt->sys_regs[SCTLR_EL1] = read_sysreg_el1(SYS_SCTLR); ctxt->sys_regs[ACTLR_EL1] = read_sysreg(actlr_el1); - ctxt->sys_regs[CPACR_EL1] = read_sysreg_el1(cpacr); - ctxt->sys_regs[TTBR0_EL1] = read_sysreg_el1(ttbr0); - ctxt->sys_regs[TTBR1_EL1] = read_sysreg_el1(ttbr1); - ctxt->sys_regs[TCR_EL1] = read_sysreg_el1(tcr); - ctxt->sys_regs[ESR_EL1] = read_sysreg_el1(esr); - ctxt->sys_regs[AFSR0_EL1] = read_sysreg_el1(afsr0); - ctxt->sys_regs[AFSR1_EL1] = read_sysreg_el1(afsr1); - ctxt->sys_regs[FAR_EL1] = read_sysreg_el1(far); - ctxt->sys_regs[MAIR_EL1] = read_sysreg_el1(mair); - ctxt->sys_regs[VBAR_EL1] = read_sysreg_el1(vbar); - ctxt->sys_regs[CONTEXTIDR_EL1] = read_sysreg_el1(contextidr); - ctxt->sys_regs[AMAIR_EL1] = read_sysreg_el1(amair); - ctxt->sys_regs[CNTKCTL_EL1] = read_sysreg_el1(cntkctl); + ctxt->sys_regs[CPACR_EL1] = read_sysreg_el1(SYS_CPACR); + ctxt->sys_regs[TTBR0_EL1] = read_sysreg_el1(SYS_TTBR0); + ctxt->sys_regs[TTBR1_EL1] = read_sysreg_el1(SYS_TTBR1); + ctxt->sys_regs[TCR_EL1] = read_sysreg_el1(SYS_TCR); + ctxt->sys_regs[ESR_EL1] = read_sysreg_el1(SYS_ESR); + ctxt->sys_regs[AFSR0_EL1] = read_sysreg_el1(SYS_AFSR0); + ctxt->sys_regs[AFSR1_EL1] = read_sysreg_el1(SYS_AFSR1); + ctxt->sys_regs[FAR_EL1] = read_sysreg_el1(SYS_FAR); + ctxt->sys_regs[MAIR_EL1] = read_sysreg_el1(SYS_MAIR); + ctxt->sys_regs[VBAR_EL1] = read_sysreg_el1(SYS_VBAR); + ctxt->sys_regs[CONTEXTIDR_EL1] = read_sysreg_el1(SYS_CONTEXTIDR); + ctxt->sys_regs[AMAIR_EL1] = read_sysreg_el1(SYS_AMAIR); + ctxt->sys_regs[CNTKCTL_EL1] = read_sysreg_el1(SYS_CNTKCTL); ctxt->sys_regs[PAR_EL1] = read_sysreg(par_el1); ctxt->sys_regs[TPIDR_EL1] = read_sysreg(tpidr_el1); ctxt->gp_regs.sp_el1 = read_sysreg(sp_el1); - ctxt->gp_regs.elr_el1 = read_sysreg_el1(elr); - ctxt->gp_regs.spsr[KVM_SPSR_EL1]= read_sysreg_el1(spsr); + ctxt->gp_regs.elr_el1 = read_sysreg_el1(SYS_ELR); + ctxt->gp_regs.spsr[KVM_SPSR_EL1]= read_sysreg_el1(SYS_SPSR); } static void __hyp_text __sysreg_save_el2_return_state(struct kvm_cpu_context *ctxt) { - ctxt->gp_regs.regs.pc = read_sysreg_el2(elr); - ctxt->gp_regs.regs.pstate = read_sysreg_el2(spsr); + ctxt->gp_regs.regs.pc = read_sysreg_el2(SYS_ELR); + ctxt->gp_regs.regs.pstate = read_sysreg_el2(SYS_SPSR); if (cpus_have_const_cap(ARM64_HAS_RAS_EXTN)) ctxt->sys_regs[DISR_EL1] = read_sysreg_s(SYS_VDISR_EL2); @@ -109,35 +109,35 @@ static void __hyp_text __sysreg_restore_common_state(struct kvm_cpu_context *ctx static void __hyp_text __sysreg_restore_user_state(struct kvm_cpu_context *ctxt) { - write_sysreg(ctxt->sys_regs[TPIDR_EL0], tpidr_el0); - write_sysreg(ctxt->sys_regs[TPIDRRO_EL0], tpidrro_el0); + write_sysreg(ctxt->sys_regs[TPIDR_EL0], tpidr_el0); + write_sysreg(ctxt->sys_regs[TPIDRRO_EL0], tpidrro_el0); } static void __hyp_text __sysreg_restore_el1_state(struct kvm_cpu_context *ctxt) { write_sysreg(ctxt->sys_regs[MPIDR_EL1], vmpidr_el2); write_sysreg(ctxt->sys_regs[CSSELR_EL1], csselr_el1); - write_sysreg_el1(ctxt->sys_regs[SCTLR_EL1], sctlr); - write_sysreg(ctxt->sys_regs[ACTLR_EL1], actlr_el1); - write_sysreg_el1(ctxt->sys_regs[CPACR_EL1], cpacr); - write_sysreg_el1(ctxt->sys_regs[TTBR0_EL1], ttbr0); - write_sysreg_el1(ctxt->sys_regs[TTBR1_EL1], ttbr1); - write_sysreg_el1(ctxt->sys_regs[TCR_EL1], tcr); - write_sysreg_el1(ctxt->sys_regs[ESR_EL1], esr); - write_sysreg_el1(ctxt->sys_regs[AFSR0_EL1], afsr0); - write_sysreg_el1(ctxt->sys_regs[AFSR1_EL1], afsr1); - write_sysreg_el1(ctxt->sys_regs[FAR_EL1], far); - write_sysreg_el1(ctxt->sys_regs[MAIR_EL1], mair); - write_sysreg_el1(ctxt->sys_regs[VBAR_EL1], vbar); - write_sysreg_el1(ctxt->sys_regs[CONTEXTIDR_EL1],contextidr); - write_sysreg_el1(ctxt->sys_regs[AMAIR_EL1], amair); - write_sysreg_el1(ctxt->sys_regs[CNTKCTL_EL1], cntkctl); + write_sysreg_el1(ctxt->sys_regs[SCTLR_EL1], SYS_SCTLR); + write_sysreg(ctxt->sys_regs[ACTLR_EL1], actlr_el1); + write_sysreg_el1(ctxt->sys_regs[CPACR_EL1], SYS_CPACR); + write_sysreg_el1(ctxt->sys_regs[TTBR0_EL1], SYS_TTBR0); + write_sysreg_el1(ctxt->sys_regs[TTBR1_EL1], SYS_TTBR1); + write_sysreg_el1(ctxt->sys_regs[TCR_EL1], SYS_TCR); + write_sysreg_el1(ctxt->sys_regs[ESR_EL1], SYS_ESR); + write_sysreg_el1(ctxt->sys_regs[AFSR0_EL1], SYS_AFSR0); + write_sysreg_el1(ctxt->sys_regs[AFSR1_EL1], SYS_AFSR1); + write_sysreg_el1(ctxt->sys_regs[FAR_EL1], SYS_FAR); + write_sysreg_el1(ctxt->sys_regs[MAIR_EL1], SYS_MAIR); + write_sysreg_el1(ctxt->sys_regs[VBAR_EL1], SYS_VBAR); + write_sysreg_el1(ctxt->sys_regs[CONTEXTIDR_EL1],SYS_CONTEXTIDR); + write_sysreg_el1(ctxt->sys_regs[AMAIR_EL1], SYS_AMAIR); + write_sysreg_el1(ctxt->sys_regs[CNTKCTL_EL1], SYS_CNTKCTL); write_sysreg(ctxt->sys_regs[PAR_EL1], par_el1); write_sysreg(ctxt->sys_regs[TPIDR_EL1], tpidr_el1); write_sysreg(ctxt->gp_regs.sp_el1, sp_el1); - write_sysreg_el1(ctxt->gp_regs.elr_el1, elr); - write_sysreg_el1(ctxt->gp_regs.spsr[KVM_SPSR_EL1],spsr); + write_sysreg_el1(ctxt->gp_regs.elr_el1, SYS_ELR); + write_sysreg_el1(ctxt->gp_regs.spsr[KVM_SPSR_EL1],SYS_SPSR); } static void __hyp_text @@ -160,8 +160,8 @@ __sysreg_restore_el2_return_state(struct kvm_cpu_context *ctxt) if (!(mode & PSR_MODE32_BIT) && mode >= PSR_MODE_EL2t) pstate = PSR_MODE_EL2h | PSR_IL_BIT; - write_sysreg_el2(ctxt->gp_regs.regs.pc, elr); - write_sysreg_el2(pstate, spsr); + write_sysreg_el2(ctxt->gp_regs.regs.pc, SYS_ELR); + write_sysreg_el2(pstate, SYS_SPSR); if (cpus_have_const_cap(ARM64_HAS_RAS_EXTN)) write_sysreg_s(ctxt->sys_regs[DISR_EL1], SYS_VDISR_EL2); diff --git a/arch/arm64/kvm/hyp/tlb.c b/arch/arm64/kvm/hyp/tlb.c index 32078b767f63..c466060b76d6 100644 --- a/arch/arm64/kvm/hyp/tlb.c +++ b/arch/arm64/kvm/hyp/tlb.c @@ -33,12 +33,12 @@ static void __hyp_text __tlb_switch_to_guest_vhe(struct kvm *kvm, * in the TCR_EL1 register. We also need to prevent it to * allocate IPA->PA walks, so we enable the S1 MMU... */ - val = cxt->tcr = read_sysreg_el1(tcr); + val = cxt->tcr = read_sysreg_el1(SYS_TCR); val |= TCR_EPD1_MASK | TCR_EPD0_MASK; - write_sysreg_el1(val, tcr); - val = cxt->sctlr = read_sysreg_el1(sctlr); + write_sysreg_el1(val, SYS_TCR); + val = cxt->sctlr = read_sysreg_el1(SYS_SCTLR); val |= SCTLR_ELx_M; - write_sysreg_el1(val, sctlr); + write_sysreg_el1(val, SYS_SCTLR); } /* @@ -85,8 +85,8 @@ static void __hyp_text __tlb_switch_to_host_vhe(struct kvm *kvm, if (cpus_have_const_cap(ARM64_WORKAROUND_1165522)) { /* Restore the registers to what they were */ - write_sysreg_el1(cxt->tcr, tcr); - write_sysreg_el1(cxt->sctlr, sctlr); + write_sysreg_el1(cxt->tcr, SYS_TCR); + write_sysreg_el1(cxt->sctlr, SYS_SCTLR); } local_irq_restore(cxt->flags); @@ -193,6 +193,18 @@ void __hyp_text __kvm_flush_vm_context(void) { dsb(ishst); __tlbi(alle1is); - asm volatile("ic ialluis" : : ); + + /* + * VIPT and PIPT caches are not affected by VMID, so no maintenance + * is necessary across a VMID rollover. + * + * VPIPT caches constrain lookup and maintenance to the active VMID, + * so we need to invalidate lines with a stale VMID to avoid an ABA + * race after multiple rollovers. + * + */ + if (icache_is_vpipt()) + asm volatile("ic ialluis"); + dsb(ish); } diff --git a/arch/arm64/kvm/hyp/vgic-v2-cpuif-proxy.c b/arch/arm64/kvm/hyp/vgic-v2-cpuif-proxy.c index ba2aaeb84c6c..29ee1feba4eb 100644 --- a/arch/arm64/kvm/hyp/vgic-v2-cpuif-proxy.c +++ b/arch/arm64/kvm/hyp/vgic-v2-cpuif-proxy.c @@ -16,7 +16,7 @@ static bool __hyp_text __is_be(struct kvm_vcpu *vcpu) { if (vcpu_mode_is_32bit(vcpu)) - return !!(read_sysreg_el2(spsr) & PSR_AA32_E_BIT); + return !!(read_sysreg_el2(SYS_SPSR) & PSR_AA32_E_BIT); return !!(read_sysreg(SCTLR_EL1) & SCTLR_ELx_EE); } diff --git a/arch/arm64/kvm/regmap.c b/arch/arm64/kvm/regmap.c index d66613e6ad08..a900181e3867 100644 --- a/arch/arm64/kvm/regmap.c +++ b/arch/arm64/kvm/regmap.c @@ -152,7 +152,7 @@ unsigned long vcpu_read_spsr32(const struct kvm_vcpu *vcpu) switch (spsr_idx) { case KVM_SPSR_SVC: - return read_sysreg_el1(spsr); + return read_sysreg_el1(SYS_SPSR); case KVM_SPSR_ABT: return read_sysreg(spsr_abt); case KVM_SPSR_UND: @@ -177,14 +177,19 @@ void vcpu_write_spsr32(struct kvm_vcpu *vcpu, unsigned long v) switch (spsr_idx) { case KVM_SPSR_SVC: - write_sysreg_el1(v, spsr); + write_sysreg_el1(v, SYS_SPSR); + break; case KVM_SPSR_ABT: write_sysreg(v, spsr_abt); + break; case KVM_SPSR_UND: write_sysreg(v, spsr_und); + break; case KVM_SPSR_IRQ: write_sysreg(v, spsr_irq); + break; case KVM_SPSR_FIQ: write_sysreg(v, spsr_fiq); + break; } } diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c index ce933f296049..2071260a275b 100644 --- a/arch/arm64/kvm/sys_regs.c +++ b/arch/arm64/kvm/sys_regs.c @@ -81,24 +81,24 @@ u64 vcpu_read_sys_reg(const struct kvm_vcpu *vcpu, int reg) */ switch (reg) { case CSSELR_EL1: return read_sysreg_s(SYS_CSSELR_EL1); - case SCTLR_EL1: return read_sysreg_s(sctlr_EL12); + case SCTLR_EL1: return read_sysreg_s(SYS_SCTLR_EL12); case ACTLR_EL1: return read_sysreg_s(SYS_ACTLR_EL1); - case CPACR_EL1: return read_sysreg_s(cpacr_EL12); - case TTBR0_EL1: return read_sysreg_s(ttbr0_EL12); - case TTBR1_EL1: return read_sysreg_s(ttbr1_EL12); - case TCR_EL1: return read_sysreg_s(tcr_EL12); - case ESR_EL1: return read_sysreg_s(esr_EL12); - case AFSR0_EL1: return read_sysreg_s(afsr0_EL12); - case AFSR1_EL1: return read_sysreg_s(afsr1_EL12); - case FAR_EL1: return read_sysreg_s(far_EL12); - case MAIR_EL1: return read_sysreg_s(mair_EL12); - case VBAR_EL1: return read_sysreg_s(vbar_EL12); - case CONTEXTIDR_EL1: return read_sysreg_s(contextidr_EL12); + case CPACR_EL1: return read_sysreg_s(SYS_CPACR_EL12); + case TTBR0_EL1: return read_sysreg_s(SYS_TTBR0_EL12); + case TTBR1_EL1: return read_sysreg_s(SYS_TTBR1_EL12); + case TCR_EL1: return read_sysreg_s(SYS_TCR_EL12); + case ESR_EL1: return read_sysreg_s(SYS_ESR_EL12); + case AFSR0_EL1: return read_sysreg_s(SYS_AFSR0_EL12); + case AFSR1_EL1: return read_sysreg_s(SYS_AFSR1_EL12); + case FAR_EL1: return read_sysreg_s(SYS_FAR_EL12); + case MAIR_EL1: return read_sysreg_s(SYS_MAIR_EL12); + case VBAR_EL1: return read_sysreg_s(SYS_VBAR_EL12); + case CONTEXTIDR_EL1: return read_sysreg_s(SYS_CONTEXTIDR_EL12); case TPIDR_EL0: return read_sysreg_s(SYS_TPIDR_EL0); case TPIDRRO_EL0: return read_sysreg_s(SYS_TPIDRRO_EL0); case TPIDR_EL1: return read_sysreg_s(SYS_TPIDR_EL1); - case AMAIR_EL1: return read_sysreg_s(amair_EL12); - case CNTKCTL_EL1: return read_sysreg_s(cntkctl_EL12); + case AMAIR_EL1: return read_sysreg_s(SYS_AMAIR_EL12); + case CNTKCTL_EL1: return read_sysreg_s(SYS_CNTKCTL_EL12); case PAR_EL1: return read_sysreg_s(SYS_PAR_EL1); case DACR32_EL2: return read_sysreg_s(SYS_DACR32_EL2); case IFSR32_EL2: return read_sysreg_s(SYS_IFSR32_EL2); @@ -124,24 +124,24 @@ void vcpu_write_sys_reg(struct kvm_vcpu *vcpu, u64 val, int reg) */ switch (reg) { case CSSELR_EL1: write_sysreg_s(val, SYS_CSSELR_EL1); return; - case SCTLR_EL1: write_sysreg_s(val, sctlr_EL12); return; + case SCTLR_EL1: write_sysreg_s(val, SYS_SCTLR_EL12); return; case ACTLR_EL1: write_sysreg_s(val, SYS_ACTLR_EL1); return; - case CPACR_EL1: write_sysreg_s(val, cpacr_EL12); return; - case TTBR0_EL1: write_sysreg_s(val, ttbr0_EL12); return; - case TTBR1_EL1: write_sysreg_s(val, ttbr1_EL12); return; - case TCR_EL1: write_sysreg_s(val, tcr_EL12); return; - case ESR_EL1: write_sysreg_s(val, esr_EL12); return; - case AFSR0_EL1: write_sysreg_s(val, afsr0_EL12); return; - case AFSR1_EL1: write_sysreg_s(val, afsr1_EL12); return; - case FAR_EL1: write_sysreg_s(val, far_EL12); return; - case MAIR_EL1: write_sysreg_s(val, mair_EL12); return; - case VBAR_EL1: write_sysreg_s(val, vbar_EL12); return; - case CONTEXTIDR_EL1: write_sysreg_s(val, contextidr_EL12); return; + case CPACR_EL1: write_sysreg_s(val, SYS_CPACR_EL12); return; + case TTBR0_EL1: write_sysreg_s(val, SYS_TTBR0_EL12); return; + case TTBR1_EL1: write_sysreg_s(val, SYS_TTBR1_EL12); return; + case TCR_EL1: write_sysreg_s(val, SYS_TCR_EL12); return; + case ESR_EL1: write_sysreg_s(val, SYS_ESR_EL12); return; + case AFSR0_EL1: write_sysreg_s(val, SYS_AFSR0_EL12); return; + case AFSR1_EL1: write_sysreg_s(val, SYS_AFSR1_EL12); return; + case FAR_EL1: write_sysreg_s(val, SYS_FAR_EL12); return; + case MAIR_EL1: write_sysreg_s(val, SYS_MAIR_EL12); return; + case VBAR_EL1: write_sysreg_s(val, SYS_VBAR_EL12); return; + case CONTEXTIDR_EL1: write_sysreg_s(val, SYS_CONTEXTIDR_EL12); return; case TPIDR_EL0: write_sysreg_s(val, SYS_TPIDR_EL0); return; case TPIDRRO_EL0: write_sysreg_s(val, SYS_TPIDRRO_EL0); return; case TPIDR_EL1: write_sysreg_s(val, SYS_TPIDR_EL1); return; - case AMAIR_EL1: write_sysreg_s(val, amair_EL12); return; - case CNTKCTL_EL1: write_sysreg_s(val, cntkctl_EL12); return; + case AMAIR_EL1: write_sysreg_s(val, SYS_AMAIR_EL12); return; + case CNTKCTL_EL1: write_sysreg_s(val, SYS_CNTKCTL_EL12); return; case PAR_EL1: write_sysreg_s(val, SYS_PAR_EL1); return; case DACR32_EL2: write_sysreg_s(val, SYS_DACR32_EL2); return; case IFSR32_EL2: write_sysreg_s(val, SYS_IFSR32_EL2); return; @@ -632,7 +632,7 @@ static void reset_pmcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r) */ val = ((pmcr & ~ARMV8_PMU_PMCR_MASK) | (ARMV8_PMU_PMCR_MASK & 0xdecafbad)) & (~ARMV8_PMU_PMCR_E); - __vcpu_sys_reg(vcpu, PMCR_EL0) = val; + __vcpu_sys_reg(vcpu, r->reg) = val; } static bool check_pmu_access_disabled(struct kvm_vcpu *vcpu, u64 flags) @@ -865,12 +865,12 @@ static bool access_pmcnten(struct kvm_vcpu *vcpu, struct sys_reg_params *p, if (r->Op2 & 0x1) { /* accessing PMCNTENSET_EL0 */ __vcpu_sys_reg(vcpu, PMCNTENSET_EL0) |= val; - kvm_pmu_enable_counter(vcpu, val); + kvm_pmu_enable_counter_mask(vcpu, val); kvm_vcpu_pmu_restore_guest(vcpu); } else { /* accessing PMCNTENCLR_EL0 */ __vcpu_sys_reg(vcpu, PMCNTENSET_EL0) &= ~val; - kvm_pmu_disable_counter(vcpu, val); + kvm_pmu_disable_counter_mask(vcpu, val); } } else { p->regval = __vcpu_sys_reg(vcpu, PMCNTENSET_EL0) & mask; @@ -981,13 +981,13 @@ static bool access_pmuserenr(struct kvm_vcpu *vcpu, struct sys_reg_params *p, /* Silly macro to expand the DBG{BCR,BVR,WVR,WCR}n_EL1 registers in one go */ #define DBG_BCR_BVR_WCR_WVR_EL1(n) \ { SYS_DESC(SYS_DBGBVRn_EL1(n)), \ - trap_bvr, reset_bvr, n, 0, get_bvr, set_bvr }, \ + trap_bvr, reset_bvr, 0, 0, get_bvr, set_bvr }, \ { SYS_DESC(SYS_DBGBCRn_EL1(n)), \ - trap_bcr, reset_bcr, n, 0, get_bcr, set_bcr }, \ + trap_bcr, reset_bcr, 0, 0, get_bcr, set_bcr }, \ { SYS_DESC(SYS_DBGWVRn_EL1(n)), \ - trap_wvr, reset_wvr, n, 0, get_wvr, set_wvr }, \ + trap_wvr, reset_wvr, 0, 0, get_wvr, set_wvr }, \ { SYS_DESC(SYS_DBGWCRn_EL1(n)), \ - trap_wcr, reset_wcr, n, 0, get_wcr, set_wcr } + trap_wcr, reset_wcr, 0, 0, get_wcr, set_wcr } /* Macro to expand the PMEVCNTRn_EL0 register */ #define PMU_PMEVCNTR_EL0(n) \ @@ -1540,7 +1540,7 @@ static const struct sys_reg_desc sys_reg_descs[] = { { SYS_DESC(SYS_CSSELR_EL1), access_csselr, reset_unknown, CSSELR_EL1 }, { SYS_DESC(SYS_CTR_EL0), access_ctr }, - { SYS_DESC(SYS_PMCR_EL0), access_pmcr, reset_pmcr, }, + { SYS_DESC(SYS_PMCR_EL0), access_pmcr, reset_pmcr, PMCR_EL0 }, { SYS_DESC(SYS_PMCNTENSET_EL0), access_pmcnten, reset_unknown, PMCNTENSET_EL0 }, { SYS_DESC(SYS_PMCNTENCLR_EL0), access_pmcnten, NULL, PMCNTENSET_EL0 }, { SYS_DESC(SYS_PMOVSCLR_EL0), access_pmovs, NULL, PMOVSSET_EL0 }, @@ -2254,13 +2254,19 @@ static int emulate_sys_reg(struct kvm_vcpu *vcpu, } static void reset_sys_reg_descs(struct kvm_vcpu *vcpu, - const struct sys_reg_desc *table, size_t num) + const struct sys_reg_desc *table, size_t num, + unsigned long *bmap) { unsigned long i; for (i = 0; i < num; i++) - if (table[i].reset) + if (table[i].reset) { + int reg = table[i].reg; + table[i].reset(vcpu, &table[i]); + if (reg > 0 && reg < NR_SYS_REGS) + set_bit(reg, bmap); + } } /** @@ -2774,18 +2780,16 @@ void kvm_reset_sys_regs(struct kvm_vcpu *vcpu) { size_t num; const struct sys_reg_desc *table; - - /* Catch someone adding a register without putting in reset entry. */ - memset(&vcpu->arch.ctxt.sys_regs, 0x42, sizeof(vcpu->arch.ctxt.sys_regs)); + DECLARE_BITMAP(bmap, NR_SYS_REGS) = { 0, }; /* Generic chip reset first (so target could override). */ - reset_sys_reg_descs(vcpu, sys_reg_descs, ARRAY_SIZE(sys_reg_descs)); + reset_sys_reg_descs(vcpu, sys_reg_descs, ARRAY_SIZE(sys_reg_descs), bmap); table = get_target_table(vcpu->arch.target, true, &num); - reset_sys_reg_descs(vcpu, table, num); + reset_sys_reg_descs(vcpu, table, num, bmap); for (num = 1; num < NR_SYS_REGS; num++) { - if (WARN(__vcpu_sys_reg(vcpu, num) == 0x4242424242424242, + if (WARN(!test_bit(num, bmap), "Didn't reset __vcpu_sys_reg(%zi)\n", num)) break; } diff --git a/arch/arm64/kvm/va_layout.c b/arch/arm64/kvm/va_layout.c index 2947ab1b0fa5..2cf7d4b606c3 100644 --- a/arch/arm64/kvm/va_layout.c +++ b/arch/arm64/kvm/va_layout.c @@ -29,25 +29,25 @@ static void compute_layout(void) int kva_msb; /* Where is my RAM region? */ - hyp_va_msb = idmap_addr & BIT(VA_BITS - 1); - hyp_va_msb ^= BIT(VA_BITS - 1); + hyp_va_msb = idmap_addr & BIT(vabits_actual - 1); + hyp_va_msb ^= BIT(vabits_actual - 1); kva_msb = fls64((u64)phys_to_virt(memblock_start_of_DRAM()) ^ (u64)(high_memory - 1)); - if (kva_msb == (VA_BITS - 1)) { + if (kva_msb == (vabits_actual - 1)) { /* * No space in the address, let's compute the mask so - * that it covers (VA_BITS - 1) bits, and the region + * that it covers (vabits_actual - 1) bits, and the region * bit. The tag stays set to zero. */ - va_mask = BIT(VA_BITS - 1) - 1; + va_mask = BIT(vabits_actual - 1) - 1; va_mask |= hyp_va_msb; } else { /* * We do have some free bits to insert a random tag. * Hyp VAs are now created from kernel linear map VAs - * using the following formula (with V == VA_BITS): + * using the following formula (with V == vabits_actual): * * 63 ... V | V-1 | V-2 .. tag_lsb | tag_lsb - 1 .. 0 * --------------------------------------------------------- @@ -55,7 +55,7 @@ static void compute_layout(void) */ tag_lsb = kva_msb; va_mask = GENMASK_ULL(tag_lsb - 1, 0); - tag_val = get_random_long() & GENMASK_ULL(VA_BITS - 2, tag_lsb); + tag_val = get_random_long() & GENMASK_ULL(vabits_actual - 2, tag_lsb); tag_val |= hyp_va_msb; tag_val >>= tag_lsb; } @@ -170,11 +170,10 @@ void kvm_patch_vector_branch(struct alt_instr *alt, addr |= ((u64)origptr & GENMASK_ULL(10, 7)); /* - * Branch to the second instruction in the vectors in order to - * avoid the initial store on the stack (which we already - * perform in the hardening vectors). + * Branch over the preamble in order to avoid the initial store on + * the stack (which we already perform in the hardening vectors). */ - addr += AARCH64_INSN_SIZE; + addr += KVM_VECTOR_PREAMBLE; /* stp x0, x1, [sp, #-16]! */ insn = aarch64_insn_gen_load_store_pair(AARCH64_INSN_REG_0, diff --git a/arch/arm64/lib/Makefile b/arch/arm64/lib/Makefile index 33c2a4abda04..c21b936dc01d 100644 --- a/arch/arm64/lib/Makefile +++ b/arch/arm64/lib/Makefile @@ -11,25 +11,8 @@ CFLAGS_REMOVE_xor-neon.o += -mgeneral-regs-only CFLAGS_xor-neon.o += -ffreestanding endif -# Tell the compiler to treat all general purpose registers (with the -# exception of the IP registers, which are already handled by the caller -# in case of a PLT) as callee-saved, which allows for efficient runtime -# patching of the bl instruction in the caller with an atomic instruction -# when supported by the CPU. Result and argument registers are handled -# correctly, based on the function prototype. -lib-$(CONFIG_ARM64_LSE_ATOMICS) += atomic_ll_sc.o -CFLAGS_atomic_ll_sc.o := -ffixed-x1 -ffixed-x2 \ - -ffixed-x3 -ffixed-x4 -ffixed-x5 -ffixed-x6 \ - -ffixed-x7 -fcall-saved-x8 -fcall-saved-x9 \ - -fcall-saved-x10 -fcall-saved-x11 -fcall-saved-x12 \ - -fcall-saved-x13 -fcall-saved-x14 -fcall-saved-x15 \ - -fcall-saved-x18 -fomit-frame-pointer -CFLAGS_REMOVE_atomic_ll_sc.o := $(CC_FLAGS_FTRACE) -GCOV_PROFILE_atomic_ll_sc.o := n -KASAN_SANITIZE_atomic_ll_sc.o := n -KCOV_INSTRUMENT_atomic_ll_sc.o := n -UBSAN_SANITIZE_atomic_ll_sc.o := n - lib-$(CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE) += uaccess_flushcache.o obj-$(CONFIG_CRC32) += crc32.o + +obj-$(CONFIG_FUNCTION_ERROR_INJECTION) += error-inject.o diff --git a/arch/arm64/lib/atomic_ll_sc.c b/arch/arm64/lib/atomic_ll_sc.c deleted file mode 100644 index b0c538b0da28..000000000000 --- a/arch/arm64/lib/atomic_ll_sc.c +++ /dev/null @@ -1,3 +0,0 @@ -#include <asm/atomic.h> -#define __ARM64_IN_ATOMIC_IMPL -#include <asm/atomic_ll_sc.h> diff --git a/arch/arm64/lib/error-inject.c b/arch/arm64/lib/error-inject.c new file mode 100644 index 000000000000..ed15021da3ed --- /dev/null +++ b/arch/arm64/lib/error-inject.c @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <linux/error-injection.h> +#include <linux/kprobes.h> + +void override_function_with_return(struct pt_regs *regs) +{ + /* + * 'regs' represents the state on entry of a predefined function in + * the kernel/module and which is captured on a kprobe. + * + * When kprobe returns back from exception it will override the end + * of probed function and directly return to the predefined + * function's caller. + */ + instruction_pointer_set(regs, procedure_link_pointer(regs)); +} +NOKPROBE_SYMBOL(override_function_with_return); diff --git a/arch/arm64/mm/dma-mapping.c b/arch/arm64/mm/dma-mapping.c index 5992eb9a9a08..9239416e93d4 100644 --- a/arch/arm64/mm/dma-mapping.c +++ b/arch/arm64/mm/dma-mapping.c @@ -1,35 +1,18 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * SWIOTLB-based DMA API implementation - * * Copyright (C) 2012 ARM Ltd. * Author: Catalin Marinas <catalin.marinas@arm.com> */ #include <linux/gfp.h> -#include <linux/acpi.h> -#include <linux/memblock.h> #include <linux/cache.h> -#include <linux/export.h> -#include <linux/slab.h> -#include <linux/genalloc.h> -#include <linux/dma-direct.h> #include <linux/dma-noncoherent.h> -#include <linux/dma-contiguous.h> -#include <linux/vmalloc.h> -#include <linux/swiotlb.h> -#include <linux/pci.h> +#include <linux/dma-iommu.h> +#include <xen/xen.h> +#include <xen/swiotlb-xen.h> #include <asm/cacheflush.h> -pgprot_t arch_dma_mmap_pgprot(struct device *dev, pgprot_t prot, - unsigned long attrs) -{ - if (!dev_is_dma_coherent(dev) || (attrs & DMA_ATTR_WRITE_COMBINE)) - return pgprot_writecombine(prot); - return prot; -} - void arch_sync_dma_for_device(struct device *dev, phys_addr_t paddr, size_t size, enum dma_data_direction dir) { @@ -48,424 +31,29 @@ void arch_dma_prep_coherent(struct page *page, size_t size) } #ifdef CONFIG_IOMMU_DMA -static int __swiotlb_get_sgtable_page(struct sg_table *sgt, - struct page *page, size_t size) -{ - int ret = sg_alloc_table(sgt, 1, GFP_KERNEL); - - if (!ret) - sg_set_page(sgt->sgl, page, PAGE_ALIGN(size), 0); - - return ret; -} - -static int __swiotlb_mmap_pfn(struct vm_area_struct *vma, - unsigned long pfn, size_t size) -{ - int ret = -ENXIO; - unsigned long nr_vma_pages = vma_pages(vma); - unsigned long nr_pages = PAGE_ALIGN(size) >> PAGE_SHIFT; - unsigned long off = vma->vm_pgoff; - - if (off < nr_pages && nr_vma_pages <= (nr_pages - off)) { - ret = remap_pfn_range(vma, vma->vm_start, - pfn + off, - vma->vm_end - vma->vm_start, - vma->vm_page_prot); - } - - return ret; -} -#endif /* CONFIG_IOMMU_DMA */ - -static int __init arm64_dma_init(void) -{ - WARN_TAINT(ARCH_DMA_MINALIGN < cache_line_size(), - TAINT_CPU_OUT_OF_SPEC, - "ARCH_DMA_MINALIGN smaller than CTR_EL0.CWG (%d < %d)", - ARCH_DMA_MINALIGN, cache_line_size()); - return dma_atomic_pool_init(GFP_DMA32, __pgprot(PROT_NORMAL_NC)); -} -arch_initcall(arm64_dma_init); - -#ifdef CONFIG_IOMMU_DMA -#include <linux/dma-iommu.h> -#include <linux/platform_device.h> -#include <linux/amba/bus.h> - -/* Thankfully, all cache ops are by VA so we can ignore phys here */ -static void flush_page(struct device *dev, const void *virt, phys_addr_t phys) -{ - __dma_flush_area(virt, PAGE_SIZE); -} - -static void *__iommu_alloc_attrs(struct device *dev, size_t size, - dma_addr_t *handle, gfp_t gfp, - unsigned long attrs) -{ - bool coherent = dev_is_dma_coherent(dev); - int ioprot = dma_info_to_prot(DMA_BIDIRECTIONAL, coherent, attrs); - size_t iosize = size; - void *addr; - - if (WARN(!dev, "cannot create IOMMU mapping for unknown device\n")) - return NULL; - - size = PAGE_ALIGN(size); - - /* - * Some drivers rely on this, and we probably don't want the - * possibility of stale kernel data being read by devices anyway. - */ - gfp |= __GFP_ZERO; - - if (!gfpflags_allow_blocking(gfp)) { - struct page *page; - /* - * In atomic context we can't remap anything, so we'll only - * get the virtually contiguous buffer we need by way of a - * physically contiguous allocation. - */ - if (coherent) { - page = alloc_pages(gfp, get_order(size)); - addr = page ? page_address(page) : NULL; - } else { - addr = dma_alloc_from_pool(size, &page, gfp); - } - if (!addr) - return NULL; - - *handle = iommu_dma_map_page(dev, page, 0, iosize, ioprot); - if (*handle == DMA_MAPPING_ERROR) { - if (coherent) - __free_pages(page, get_order(size)); - else - dma_free_from_pool(addr, size); - addr = NULL; - } - } else if (attrs & DMA_ATTR_FORCE_CONTIGUOUS) { - pgprot_t prot = arch_dma_mmap_pgprot(dev, PAGE_KERNEL, attrs); - struct page *page; - - page = dma_alloc_from_contiguous(dev, size >> PAGE_SHIFT, - get_order(size), gfp & __GFP_NOWARN); - if (!page) - return NULL; - - *handle = iommu_dma_map_page(dev, page, 0, iosize, ioprot); - if (*handle == DMA_MAPPING_ERROR) { - dma_release_from_contiguous(dev, page, - size >> PAGE_SHIFT); - return NULL; - } - addr = dma_common_contiguous_remap(page, size, VM_USERMAP, - prot, - __builtin_return_address(0)); - if (addr) { - if (!coherent) - __dma_flush_area(page_to_virt(page), iosize); - memset(addr, 0, size); - } else { - iommu_dma_unmap_page(dev, *handle, iosize, 0, attrs); - dma_release_from_contiguous(dev, page, - size >> PAGE_SHIFT); - } - } else { - pgprot_t prot = arch_dma_mmap_pgprot(dev, PAGE_KERNEL, attrs); - struct page **pages; - - pages = iommu_dma_alloc(dev, iosize, gfp, attrs, ioprot, - handle, flush_page); - if (!pages) - return NULL; - - addr = dma_common_pages_remap(pages, size, VM_USERMAP, prot, - __builtin_return_address(0)); - if (!addr) - iommu_dma_free(dev, pages, iosize, handle); - } - return addr; -} - -static void __iommu_free_attrs(struct device *dev, size_t size, void *cpu_addr, - dma_addr_t handle, unsigned long attrs) -{ - size_t iosize = size; - - size = PAGE_ALIGN(size); - /* - * @cpu_addr will be one of 4 things depending on how it was allocated: - * - A remapped array of pages for contiguous allocations. - * - A remapped array of pages from iommu_dma_alloc(), for all - * non-atomic allocations. - * - A non-cacheable alias from the atomic pool, for atomic - * allocations by non-coherent devices. - * - A normal lowmem address, for atomic allocations by - * coherent devices. - * Hence how dodgy the below logic looks... - */ - if (dma_in_atomic_pool(cpu_addr, size)) { - iommu_dma_unmap_page(dev, handle, iosize, 0, 0); - dma_free_from_pool(cpu_addr, size); - } else if (attrs & DMA_ATTR_FORCE_CONTIGUOUS) { - struct page *page = vmalloc_to_page(cpu_addr); - - iommu_dma_unmap_page(dev, handle, iosize, 0, attrs); - dma_release_from_contiguous(dev, page, size >> PAGE_SHIFT); - dma_common_free_remap(cpu_addr, size, VM_USERMAP); - } else if (is_vmalloc_addr(cpu_addr)){ - struct vm_struct *area = find_vm_area(cpu_addr); - - if (WARN_ON(!area || !area->pages)) - return; - iommu_dma_free(dev, area->pages, iosize, &handle); - dma_common_free_remap(cpu_addr, size, VM_USERMAP); - } else { - iommu_dma_unmap_page(dev, handle, iosize, 0, 0); - __free_pages(virt_to_page(cpu_addr), get_order(size)); - } -} - -static int __iommu_mmap_attrs(struct device *dev, struct vm_area_struct *vma, - void *cpu_addr, dma_addr_t dma_addr, size_t size, - unsigned long attrs) -{ - struct vm_struct *area; - int ret; - - vma->vm_page_prot = arch_dma_mmap_pgprot(dev, vma->vm_page_prot, attrs); - - if (dma_mmap_from_dev_coherent(dev, vma, cpu_addr, size, &ret)) - return ret; - - if (!is_vmalloc_addr(cpu_addr)) { - unsigned long pfn = page_to_pfn(virt_to_page(cpu_addr)); - return __swiotlb_mmap_pfn(vma, pfn, size); - } - - if (attrs & DMA_ATTR_FORCE_CONTIGUOUS) { - /* - * DMA_ATTR_FORCE_CONTIGUOUS allocations are always remapped, - * hence in the vmalloc space. - */ - unsigned long pfn = vmalloc_to_pfn(cpu_addr); - return __swiotlb_mmap_pfn(vma, pfn, size); - } - - area = find_vm_area(cpu_addr); - if (WARN_ON(!area || !area->pages)) - return -ENXIO; - - return iommu_dma_mmap(area->pages, size, vma); -} - -static int __iommu_get_sgtable(struct device *dev, struct sg_table *sgt, - void *cpu_addr, dma_addr_t dma_addr, - size_t size, unsigned long attrs) -{ - unsigned int count = PAGE_ALIGN(size) >> PAGE_SHIFT; - struct vm_struct *area = find_vm_area(cpu_addr); - - if (!is_vmalloc_addr(cpu_addr)) { - struct page *page = virt_to_page(cpu_addr); - return __swiotlb_get_sgtable_page(sgt, page, size); - } - - if (attrs & DMA_ATTR_FORCE_CONTIGUOUS) { - /* - * DMA_ATTR_FORCE_CONTIGUOUS allocations are always remapped, - * hence in the vmalloc space. - */ - struct page *page = vmalloc_to_page(cpu_addr); - return __swiotlb_get_sgtable_page(sgt, page, size); - } - - if (WARN_ON(!area || !area->pages)) - return -ENXIO; - - return sg_alloc_table_from_pages(sgt, area->pages, count, 0, size, - GFP_KERNEL); -} - -static void __iommu_sync_single_for_cpu(struct device *dev, - dma_addr_t dev_addr, size_t size, - enum dma_data_direction dir) -{ - phys_addr_t phys; - - if (dev_is_dma_coherent(dev)) - return; - - phys = iommu_iova_to_phys(iommu_get_dma_domain(dev), dev_addr); - arch_sync_dma_for_cpu(dev, phys, size, dir); -} - -static void __iommu_sync_single_for_device(struct device *dev, - dma_addr_t dev_addr, size_t size, - enum dma_data_direction dir) -{ - phys_addr_t phys; - - if (dev_is_dma_coherent(dev)) - return; - - phys = iommu_iova_to_phys(iommu_get_dma_domain(dev), dev_addr); - arch_sync_dma_for_device(dev, phys, size, dir); -} - -static dma_addr_t __iommu_map_page(struct device *dev, struct page *page, - unsigned long offset, size_t size, - enum dma_data_direction dir, - unsigned long attrs) -{ - bool coherent = dev_is_dma_coherent(dev); - int prot = dma_info_to_prot(dir, coherent, attrs); - dma_addr_t dev_addr = iommu_dma_map_page(dev, page, offset, size, prot); - - if (!coherent && !(attrs & DMA_ATTR_SKIP_CPU_SYNC) && - dev_addr != DMA_MAPPING_ERROR) - __dma_map_area(page_address(page) + offset, size, dir); - - return dev_addr; -} - -static void __iommu_unmap_page(struct device *dev, dma_addr_t dev_addr, - size_t size, enum dma_data_direction dir, - unsigned long attrs) -{ - if ((attrs & DMA_ATTR_SKIP_CPU_SYNC) == 0) - __iommu_sync_single_for_cpu(dev, dev_addr, size, dir); - - iommu_dma_unmap_page(dev, dev_addr, size, dir, attrs); -} - -static void __iommu_sync_sg_for_cpu(struct device *dev, - struct scatterlist *sgl, int nelems, - enum dma_data_direction dir) -{ - struct scatterlist *sg; - int i; - - if (dev_is_dma_coherent(dev)) - return; - - for_each_sg(sgl, sg, nelems, i) - arch_sync_dma_for_cpu(dev, sg_phys(sg), sg->length, dir); -} - -static void __iommu_sync_sg_for_device(struct device *dev, - struct scatterlist *sgl, int nelems, - enum dma_data_direction dir) -{ - struct scatterlist *sg; - int i; - - if (dev_is_dma_coherent(dev)) - return; - - for_each_sg(sgl, sg, nelems, i) - arch_sync_dma_for_device(dev, sg_phys(sg), sg->length, dir); -} - -static int __iommu_map_sg_attrs(struct device *dev, struct scatterlist *sgl, - int nelems, enum dma_data_direction dir, - unsigned long attrs) -{ - bool coherent = dev_is_dma_coherent(dev); - - if ((attrs & DMA_ATTR_SKIP_CPU_SYNC) == 0) - __iommu_sync_sg_for_device(dev, sgl, nelems, dir); - - return iommu_dma_map_sg(dev, sgl, nelems, - dma_info_to_prot(dir, coherent, attrs)); -} - -static void __iommu_unmap_sg_attrs(struct device *dev, - struct scatterlist *sgl, int nelems, - enum dma_data_direction dir, - unsigned long attrs) -{ - if ((attrs & DMA_ATTR_SKIP_CPU_SYNC) == 0) - __iommu_sync_sg_for_cpu(dev, sgl, nelems, dir); - - iommu_dma_unmap_sg(dev, sgl, nelems, dir, attrs); -} - -static const struct dma_map_ops iommu_dma_ops = { - .alloc = __iommu_alloc_attrs, - .free = __iommu_free_attrs, - .mmap = __iommu_mmap_attrs, - .get_sgtable = __iommu_get_sgtable, - .map_page = __iommu_map_page, - .unmap_page = __iommu_unmap_page, - .map_sg = __iommu_map_sg_attrs, - .unmap_sg = __iommu_unmap_sg_attrs, - .sync_single_for_cpu = __iommu_sync_single_for_cpu, - .sync_single_for_device = __iommu_sync_single_for_device, - .sync_sg_for_cpu = __iommu_sync_sg_for_cpu, - .sync_sg_for_device = __iommu_sync_sg_for_device, - .map_resource = iommu_dma_map_resource, - .unmap_resource = iommu_dma_unmap_resource, -}; - -static int __init __iommu_dma_init(void) -{ - return iommu_dma_init(); -} -arch_initcall(__iommu_dma_init); - -static void __iommu_setup_dma_ops(struct device *dev, u64 dma_base, u64 size, - const struct iommu_ops *ops) -{ - struct iommu_domain *domain; - - if (!ops) - return; - - /* - * The IOMMU core code allocates the default DMA domain, which the - * underlying IOMMU driver needs to support via the dma-iommu layer. - */ - domain = iommu_get_domain_for_dev(dev); - - if (!domain) - goto out_err; - - if (domain->type == IOMMU_DOMAIN_DMA) { - if (iommu_dma_init_domain(domain, dma_base, size, dev)) - goto out_err; - - dev->dma_ops = &iommu_dma_ops; - } - - return; - -out_err: - pr_warn("Failed to set up IOMMU for device %s; retaining platform DMA ops\n", - dev_name(dev)); -} - void arch_teardown_dma_ops(struct device *dev) { dev->dma_ops = NULL; } - -#else - -static void __iommu_setup_dma_ops(struct device *dev, u64 dma_base, u64 size, - const struct iommu_ops *iommu) -{ } - -#endif /* CONFIG_IOMMU_DMA */ +#endif void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size, const struct iommu_ops *iommu, bool coherent) { + int cls = cache_line_size_of_cpu(); + + WARN_TAINT(!coherent && cls > ARCH_DMA_MINALIGN, + TAINT_CPU_OUT_OF_SPEC, + "%s %s: ARCH_DMA_MINALIGN smaller than CTR_EL0.CWG (%d < %d)", + dev_driver_string(dev), dev_name(dev), + ARCH_DMA_MINALIGN, cls); + dev->dma_coherent = coherent; - __iommu_setup_dma_ops(dev, dma_base, size, iommu); + if (iommu) + iommu_setup_dma_ops(dev, dma_base, size); #ifdef CONFIG_XEN if (xen_initial_domain()) - dev->dma_ops = xen_dma_ops; + dev->dma_ops = &xen_swiotlb_dma_ops; #endif } diff --git a/arch/arm64/mm/dump.c b/arch/arm64/mm/dump.c index 82b3a7fdb4a6..93f9f77582ae 100644 --- a/arch/arm64/mm/dump.c +++ b/arch/arm64/mm/dump.c @@ -25,9 +25,20 @@ #include <asm/pgtable-hwdef.h> #include <asm/ptdump.h> -static const struct addr_marker address_markers[] = { + +enum address_markers_idx { + PAGE_OFFSET_NR = 0, + PAGE_END_NR, #ifdef CONFIG_KASAN - { KASAN_SHADOW_START, "Kasan shadow start" }, + KASAN_START_NR, +#endif +}; + +static struct addr_marker address_markers[] = { + { PAGE_OFFSET, "Linear Mapping start" }, + { 0 /* PAGE_END */, "Linear Mapping end" }, +#ifdef CONFIG_KASAN + { 0 /* KASAN_SHADOW_START */, "Kasan shadow start" }, { KASAN_SHADOW_END, "Kasan shadow end" }, #endif { MODULES_VADDR, "Modules start" }, @@ -42,7 +53,6 @@ static const struct addr_marker address_markers[] = { { VMEMMAP_START, "vmemmap start" }, { VMEMMAP_START + VMEMMAP_SIZE, "vmemmap end" }, #endif - { PAGE_OFFSET, "Linear mapping" }, { -1, NULL }, }; @@ -376,7 +386,7 @@ static void ptdump_initialize(void) static struct ptdump_info kernel_ptdump_info = { .mm = &init_mm, .markers = address_markers, - .base_addr = VA_START, + .base_addr = PAGE_OFFSET, }; void ptdump_check_wx(void) @@ -390,7 +400,7 @@ void ptdump_check_wx(void) .check_wx = true, }; - walk_pgd(&st, &init_mm, VA_START); + walk_pgd(&st, &init_mm, PAGE_OFFSET); note_page(&st, 0, 0, 0); if (st.wx_pages || st.uxn_pages) pr_warn("Checked W+X mappings: FAILED, %lu W+X pages found, %lu non-UXN pages found\n", @@ -401,6 +411,10 @@ void ptdump_check_wx(void) static int ptdump_init(void) { + address_markers[PAGE_END_NR].start_address = PAGE_END; +#ifdef CONFIG_KASAN + address_markers[KASAN_START_NR].start_address = KASAN_SHADOW_START; +#endif ptdump_initialize(); ptdump_debugfs_register(&kernel_ptdump_info, "kernel_page_tables"); return 0; diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c index 2d115016feb4..115d7a0e4b08 100644 --- a/arch/arm64/mm/fault.c +++ b/arch/arm64/mm/fault.c @@ -8,6 +8,7 @@ */ #include <linux/acpi.h> +#include <linux/bitfield.h> #include <linux/extable.h> #include <linux/signal.h> #include <linux/mm.h> @@ -59,28 +60,6 @@ static inline const struct fault_info *esr_to_debug_fault_info(unsigned int esr) return debug_fault_info + DBG_ESR_EVT(esr); } -#ifdef CONFIG_KPROBES -static inline int notify_page_fault(struct pt_regs *regs, unsigned int esr) -{ - int ret = 0; - - /* kprobe_running() needs smp_processor_id() */ - if (!user_mode(regs)) { - preempt_disable(); - if (kprobe_running() && kprobe_fault_handler(regs, esr)) - ret = 1; - preempt_enable(); - } - - return ret; -} -#else -static inline int notify_page_fault(struct pt_regs *regs, unsigned int esr) -{ - return 0; -} -#endif - static void data_abort_decode(unsigned int esr) { pr_alert("Data abort info:\n"); @@ -108,8 +87,8 @@ static void mem_abort_decode(unsigned int esr) pr_alert("Mem abort info:\n"); pr_alert(" ESR = 0x%08x\n", esr); - pr_alert(" Exception class = %s, IL = %u bits\n", - esr_get_class_string(esr), + pr_alert(" EC = 0x%02lx: %s, IL = %u bits\n", + ESR_ELx_EC(esr), esr_get_class_string(esr), (esr & ESR_ELx_IL) ? 32 : 16); pr_alert(" SET = %lu, FnV = %lu\n", (esr & ESR_ELx_SET_MASK) >> ESR_ELx_SET_SHIFT, @@ -131,7 +110,7 @@ static inline bool is_ttbr0_addr(unsigned long addr) static inline bool is_ttbr1_addr(unsigned long addr) { /* TTBR1 addresses may have a tag if KASAN_SW_TAGS is in use */ - return arch_kasan_reset_tag(addr) >= VA_START; + return arch_kasan_reset_tag(addr) >= PAGE_OFFSET; } /* @@ -160,10 +139,9 @@ static void show_pte(unsigned long addr) return; } - pr_alert("%s pgtable: %luk pages, %u-bit VAs, pgdp=%016lx\n", + pr_alert("%s pgtable: %luk pages, %llu-bit VAs, pgdp=%016lx\n", mm == &init_mm ? "swapper" : "user", PAGE_SIZE / SZ_1K, - mm == &init_mm ? VA_BITS : (int)vabits_user, - (unsigned long)virt_to_phys(mm->pgd)); + vabits_actual, (unsigned long)virt_to_phys(mm->pgd)); pgdp = pgd_offset(mm, addr); pgd = READ_ONCE(*pgdp); pr_alert("[%016lx] pgd=%016llx", addr, pgd_val(pgd)); @@ -264,6 +242,34 @@ static inline bool is_el1_permission_fault(unsigned long addr, unsigned int esr, return false; } +static bool __kprobes is_spurious_el1_translation_fault(unsigned long addr, + unsigned int esr, + struct pt_regs *regs) +{ + unsigned long flags; + u64 par, dfsc; + + if (ESR_ELx_EC(esr) != ESR_ELx_EC_DABT_CUR || + (esr & ESR_ELx_FSC_TYPE) != ESR_ELx_FSC_FAULT) + return false; + + local_irq_save(flags); + asm volatile("at s1e1r, %0" :: "r" (addr)); + isb(); + par = read_sysreg(par_el1); + local_irq_restore(flags); + + if (!(par & SYS_PAR_EL1_F)) + return false; + + /* + * If we got a different type of fault from the AT instruction, + * treat the translation fault as spurious. + */ + dfsc = FIELD_PREP(SYS_PAR_EL1_FST, par); + return (dfsc & ESR_ELx_FSC_TYPE) != ESR_ELx_FSC_FAULT; +} + static void die_kernel_fault(const char *msg, unsigned long addr, unsigned int esr, struct pt_regs *regs) { @@ -292,6 +298,10 @@ static void __do_kernel_fault(unsigned long addr, unsigned int esr, if (!is_el1_instruction_abort(esr) && fixup_exception(regs)) return; + if (WARN_RATELIMIT(is_spurious_el1_translation_fault(addr, esr, regs), + "Ignoring spurious kernel translation fault at virtual address %016lx\n", addr)) + return; + if (is_el1_permission_fault(addr, esr, regs)) { if (esr & ESR_ELx_WNR) msg = "write to read-only memory"; @@ -384,40 +394,31 @@ static void do_bad_area(unsigned long addr, unsigned int esr, struct pt_regs *re #define VM_FAULT_BADACCESS 0x020000 static vm_fault_t __do_page_fault(struct mm_struct *mm, unsigned long addr, - unsigned int mm_flags, unsigned long vm_flags, - struct task_struct *tsk) + unsigned int mm_flags, unsigned long vm_flags) { - struct vm_area_struct *vma; - vm_fault_t fault; + struct vm_area_struct *vma = find_vma(mm, addr); - vma = find_vma(mm, addr); - fault = VM_FAULT_BADMAP; if (unlikely(!vma)) - goto out; - if (unlikely(vma->vm_start > addr)) - goto check_stack; + return VM_FAULT_BADMAP; /* * Ok, we have a good vm_area for this memory access, so we can handle * it. */ -good_area: + if (unlikely(vma->vm_start > addr)) { + if (!(vma->vm_flags & VM_GROWSDOWN)) + return VM_FAULT_BADMAP; + if (expand_stack(vma, addr)) + return VM_FAULT_BADMAP; + } + /* * Check that the permissions on the VMA allow for the fault which * occurred. */ - if (!(vma->vm_flags & vm_flags)) { - fault = VM_FAULT_BADACCESS; - goto out; - } - + if (!(vma->vm_flags & vm_flags)) + return VM_FAULT_BADACCESS; return handle_mm_fault(vma, addr & PAGE_MASK, mm_flags); - -check_stack: - if (vma->vm_flags & VM_GROWSDOWN && !expand_stack(vma, addr)) - goto good_area; -out: - return fault; } static bool is_el0_instruction_abort(unsigned int esr) @@ -425,22 +426,27 @@ static bool is_el0_instruction_abort(unsigned int esr) return ESR_ELx_EC(esr) == ESR_ELx_EC_IABT_LOW; } +/* + * Note: not valid for EL1 DC IVAC, but we never use that such that it + * should fault. EL0 cannot issue DC IVAC (undef). + */ +static bool is_write_abort(unsigned int esr) +{ + return (esr & ESR_ELx_WNR) && !(esr & ESR_ELx_CM); +} + static int __kprobes do_page_fault(unsigned long addr, unsigned int esr, struct pt_regs *regs) { const struct fault_info *inf; - struct task_struct *tsk; - struct mm_struct *mm; + struct mm_struct *mm = current->mm; vm_fault_t fault, major = 0; unsigned long vm_flags = VM_READ | VM_WRITE; unsigned int mm_flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE; - if (notify_page_fault(regs, esr)) + if (kprobe_page_fault(regs, esr)) return 0; - tsk = current; - mm = tsk->mm; - /* * If we're in an interrupt or have no user context, we must not take * the fault. @@ -453,7 +459,8 @@ static int __kprobes do_page_fault(unsigned long addr, unsigned int esr, if (is_el0_instruction_abort(esr)) { vm_flags = VM_EXEC; - } else if ((esr & ESR_ELx_WNR) && !(esr & ESR_ELx_CM)) { + mm_flags |= FAULT_FLAG_INSTRUCTION; + } else if (is_write_abort(esr)) { vm_flags = VM_WRITE; mm_flags |= FAULT_FLAG_WRITE; } @@ -492,12 +499,14 @@ retry: */ might_sleep(); #ifdef CONFIG_DEBUG_VM - if (!user_mode(regs) && !search_exception_tables(regs->pc)) + if (!user_mode(regs) && !search_exception_tables(regs->pc)) { + up_read(&mm->mmap_sem); goto no_context; + } #endif } - fault = __do_page_fault(mm, addr, mm_flags, vm_flags, tsk); + fault = __do_page_fault(mm, addr, mm_flags, vm_flags); major |= fault & VM_FAULT_MAJOR; if (fault & VM_FAULT_RETRY) { @@ -537,11 +546,11 @@ retry: * that point. */ if (major) { - tsk->maj_flt++; + current->maj_flt++; perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, regs, addr); } else { - tsk->min_flt++; + current->min_flt++; perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, regs, addr); } @@ -800,6 +809,53 @@ void __init hook_debug_fault_code(int nr, debug_fault_info[nr].name = name; } +/* + * In debug exception context, we explicitly disable preemption despite + * having interrupts disabled. + * This serves two purposes: it makes it much less likely that we would + * accidentally schedule in exception context and it will force a warning + * if we somehow manage to schedule by accident. + */ +static void debug_exception_enter(struct pt_regs *regs) +{ + /* + * Tell lockdep we disabled irqs in entry.S. Do nothing if they were + * already disabled to preserve the last enabled/disabled addresses. + */ + if (interrupts_enabled(regs)) + trace_hardirqs_off(); + + if (user_mode(regs)) { + RCU_LOCKDEP_WARN(!rcu_is_watching(), "entry code didn't wake RCU"); + } else { + /* + * We might have interrupted pretty much anything. In + * fact, if we're a debug exception, we can even interrupt + * NMI processing. We don't want this code makes in_nmi() + * to return true, but we need to notify RCU. + */ + rcu_nmi_enter(); + } + + preempt_disable(); + + /* This code is a bit fragile. Test it. */ + RCU_LOCKDEP_WARN(!rcu_is_watching(), "exception_enter didn't work"); +} +NOKPROBE_SYMBOL(debug_exception_enter); + +static void debug_exception_exit(struct pt_regs *regs) +{ + preempt_enable_no_resched(); + + if (!user_mode(regs)) + rcu_nmi_exit(); + + if (interrupts_enabled(regs)) + trace_hardirqs_on(); +} +NOKPROBE_SYMBOL(debug_exception_exit); + #ifdef CONFIG_ARM64_ERRATUM_1463225 DECLARE_PER_CPU(int, __in_cortex_a76_erratum_1463225_wa); @@ -840,12 +896,7 @@ asmlinkage void __exception do_debug_exception(unsigned long addr_if_watchpoint, if (cortex_a76_erratum_1463225_debug_handler(regs)) return; - /* - * Tell lockdep we disabled irqs in entry.S. Do nothing if they were - * already disabled to preserve the last enabled/disabled addresses. - */ - if (interrupts_enabled(regs)) - trace_hardirqs_off(); + debug_exception_enter(regs); if (user_mode(regs) && !is_ttbr0_addr(pc)) arm64_apply_bp_hardening(); @@ -855,7 +906,6 @@ asmlinkage void __exception do_debug_exception(unsigned long addr_if_watchpoint, inf->sig, inf->code, (void __user *)pc, esr); } - if (interrupts_enabled(regs)) - trace_hardirqs_on(); + debug_exception_exit(regs); } NOKPROBE_SYMBOL(do_debug_exception); diff --git a/arch/arm64/mm/flush.c b/arch/arm64/mm/flush.c index dc19300309d2..ac485163a4a7 100644 --- a/arch/arm64/mm/flush.c +++ b/arch/arm64/mm/flush.c @@ -56,8 +56,7 @@ void __sync_icache_dcache(pte_t pte) struct page *page = pte_page(pte); if (!test_and_set_bit(PG_dcache_clean, &page->flags)) - sync_icache_aliases(page_address(page), - PAGE_SIZE << compound_order(page)); + sync_icache_aliases(page_address(page), page_size(page)); } EXPORT_SYMBOL_GPL(__sync_icache_dcache); diff --git a/arch/arm64/mm/hugetlbpage.c b/arch/arm64/mm/hugetlbpage.c index f475e54fbc43..bbeb6a5a6ba6 100644 --- a/arch/arm64/mm/hugetlbpage.c +++ b/arch/arm64/mm/hugetlbpage.c @@ -228,7 +228,7 @@ pte_t *huge_pte_alloc(struct mm_struct *mm, if (sz == PUD_SIZE) { ptep = (pte_t *)pudp; - } else if (sz == (PAGE_SIZE * CONT_PTES)) { + } else if (sz == (CONT_PTE_SIZE)) { pmdp = pmd_alloc(mm, pudp, addr); WARN_ON(addr & (sz - 1)); @@ -246,7 +246,7 @@ pte_t *huge_pte_alloc(struct mm_struct *mm, ptep = huge_pmd_share(mm, addr, pudp); else ptep = (pte_t *)pmd_alloc(mm, pudp, addr); - } else if (sz == (PMD_SIZE * CONT_PMDS)) { + } else if (sz == (CONT_PMD_SIZE)) { pmdp = pmd_alloc(mm, pudp, addr); WARN_ON(addr & (sz - 1)); return (pte_t *)pmdp; @@ -454,9 +454,9 @@ static int __init hugetlbpage_init(void) #ifdef CONFIG_ARM64_4K_PAGES add_huge_page_size(PUD_SIZE); #endif - add_huge_page_size(PMD_SIZE * CONT_PMDS); + add_huge_page_size(CONT_PMD_SIZE); add_huge_page_size(PMD_SIZE); - add_huge_page_size(PAGE_SIZE * CONT_PTES); + add_huge_page_size(CONT_PTE_SIZE); return 0; } @@ -470,9 +470,9 @@ static __init int setup_hugepagesz(char *opt) #ifdef CONFIG_ARM64_4K_PAGES case PUD_SIZE: #endif - case PMD_SIZE * CONT_PMDS: + case CONT_PMD_SIZE: case PMD_SIZE: - case PAGE_SIZE * CONT_PTES: + case CONT_PTE_SIZE: add_huge_page_size(ps); return 1; } diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c index 749c9b269f08..45c00a54909c 100644 --- a/arch/arm64/mm/init.c +++ b/arch/arm64/mm/init.c @@ -50,6 +50,12 @@ s64 memstart_addr __ro_after_init = -1; EXPORT_SYMBOL(memstart_addr); +s64 physvirt_offset __ro_after_init; +EXPORT_SYMBOL(physvirt_offset); + +struct page *vmemmap __ro_after_init; +EXPORT_SYMBOL(vmemmap); + phys_addr_t arm64_dma_phys_limit __ro_after_init; #ifdef CONFIG_KEXEC_CORE @@ -180,8 +186,9 @@ static void __init zone_sizes_init(unsigned long min, unsigned long max) { unsigned long max_zone_pfns[MAX_NR_ZONES] = {0}; - if (IS_ENABLED(CONFIG_ZONE_DMA32)) - max_zone_pfns[ZONE_DMA32] = PFN_DOWN(max_zone_dma_phys()); +#ifdef CONFIG_ZONE_DMA32 + max_zone_pfns[ZONE_DMA32] = PFN_DOWN(max_zone_dma_phys()); +#endif max_zone_pfns[ZONE_NORMAL] = max; free_area_init_nodes(max_zone_pfns); @@ -300,7 +307,7 @@ static void __init fdt_enforce_memory_region(void) void __init arm64_memblock_init(void) { - const s64 linear_region_size = -(s64)PAGE_OFFSET; + const s64 linear_region_size = BIT(vabits_actual - 1); /* Handle linux,usable-memory-range property */ fdt_enforce_memory_region(); @@ -309,18 +316,25 @@ void __init arm64_memblock_init(void) memblock_remove(1ULL << PHYS_MASK_SHIFT, ULLONG_MAX); /* - * Ensure that the linear region takes up exactly half of the kernel - * virtual address space. This way, we can distinguish a linear address - * from a kernel/module/vmalloc address by testing a single bit. - */ - BUILD_BUG_ON(linear_region_size != BIT(VA_BITS - 1)); - - /* * Select a suitable value for the base of physical memory. */ memstart_addr = round_down(memblock_start_of_DRAM(), ARM64_MEMSTART_ALIGN); + physvirt_offset = PHYS_OFFSET - PAGE_OFFSET; + + vmemmap = ((struct page *)VMEMMAP_START - (memstart_addr >> PAGE_SHIFT)); + + /* + * If we are running with a 52-bit kernel VA config on a system that + * does not support it, we have to offset our vmemmap and physvirt_offset + * s.t. we avoid the 52-bit portion of the direct linear map + */ + if (IS_ENABLED(CONFIG_ARM64_VA_BITS_52) && (vabits_actual != 52)) { + vmemmap += (_PAGE_OFFSET(48) - _PAGE_OFFSET(52)) >> PAGE_SHIFT; + physvirt_offset = PHYS_OFFSET - _PAGE_OFFSET(48); + } + /* * Remove the memory that we will not be able to cover with the * linear mapping. Take care not to clip the kernel which may be @@ -569,8 +583,12 @@ void free_initmem(void) #ifdef CONFIG_BLK_DEV_INITRD void __init free_initrd_mem(unsigned long start, unsigned long end) { + unsigned long aligned_start, aligned_end; + + aligned_start = __virt_to_phys(start) & PAGE_MASK; + aligned_end = PAGE_ALIGN(__virt_to_phys(end)); + memblock_free(aligned_start, aligned_end - aligned_start); free_reserved_area((void *)start, (void *)end, 0, "initrd"); - memblock_free(__virt_to_phys(start), end - start); } #endif diff --git a/arch/arm64/mm/ioremap.c b/arch/arm64/mm/ioremap.c index fdb595a5d65f..9be71bee902c 100644 --- a/arch/arm64/mm/ioremap.c +++ b/arch/arm64/mm/ioremap.c @@ -69,7 +69,7 @@ void __iomem *__ioremap(phys_addr_t phys_addr, size_t size, pgprot_t prot) } EXPORT_SYMBOL(__ioremap); -void __iounmap(volatile void __iomem *io_addr) +void iounmap(volatile void __iomem *io_addr) { unsigned long addr = (unsigned long)io_addr & PAGE_MASK; @@ -80,7 +80,7 @@ void __iounmap(volatile void __iomem *io_addr) if (is_vmalloc_addr((void *)addr)) vunmap((void *)addr); } -EXPORT_SYMBOL(__iounmap); +EXPORT_SYMBOL(iounmap); void __iomem *ioremap_cache(phys_addr_t phys_addr, size_t size) { diff --git a/arch/arm64/mm/kasan_init.c b/arch/arm64/mm/kasan_init.c index 6cf97b904ebb..f87a32484ea8 100644 --- a/arch/arm64/mm/kasan_init.c +++ b/arch/arm64/mm/kasan_init.c @@ -156,7 +156,8 @@ asmlinkage void __init kasan_early_init(void) { BUILD_BUG_ON(KASAN_SHADOW_OFFSET != KASAN_SHADOW_END - (1UL << (64 - KASAN_SHADOW_SCALE_SHIFT))); - BUILD_BUG_ON(!IS_ALIGNED(KASAN_SHADOW_START, PGDIR_SIZE)); + BUILD_BUG_ON(!IS_ALIGNED(_KASAN_SHADOW_START(VA_BITS), PGDIR_SIZE)); + BUILD_BUG_ON(!IS_ALIGNED(_KASAN_SHADOW_START(VA_BITS_MIN), PGDIR_SIZE)); BUILD_BUG_ON(!IS_ALIGNED(KASAN_SHADOW_END, PGDIR_SIZE)); kasan_pgd_populate(KASAN_SHADOW_START, KASAN_SHADOW_END, NUMA_NO_NODE, true); @@ -225,10 +226,10 @@ void __init kasan_init(void) kasan_map_populate(kimg_shadow_start, kimg_shadow_end, early_pfn_to_nid(virt_to_pfn(lm_alias(_text)))); - kasan_populate_early_shadow((void *)KASAN_SHADOW_START, - (void *)mod_shadow_start); + kasan_populate_early_shadow(kasan_mem_to_shadow((void *)PAGE_END), + (void *)mod_shadow_start); kasan_populate_early_shadow((void *)kimg_shadow_end, - kasan_mem_to_shadow((void *)PAGE_OFFSET)); + (void *)KASAN_SHADOW_END); if (kimg_shadow_start > mod_shadow_end) kasan_populate_early_shadow((void *)mod_shadow_end, diff --git a/arch/arm64/mm/mmap.c b/arch/arm64/mm/mmap.c index b050641b5139..3028bacbc4e9 100644 --- a/arch/arm64/mm/mmap.c +++ b/arch/arm64/mm/mmap.c @@ -21,78 +21,6 @@ #include <asm/cputype.h> /* - * Leave enough space between the mmap area and the stack to honour ulimit in - * the face of randomisation. - */ -#define MIN_GAP (SZ_128M) -#define MAX_GAP (STACK_TOP/6*5) - -static int mmap_is_legacy(struct rlimit *rlim_stack) -{ - if (current->personality & ADDR_COMPAT_LAYOUT) - return 1; - - if (rlim_stack->rlim_cur == RLIM_INFINITY) - return 1; - - return sysctl_legacy_va_layout; -} - -unsigned long arch_mmap_rnd(void) -{ - unsigned long rnd; - -#ifdef CONFIG_COMPAT - if (test_thread_flag(TIF_32BIT)) - rnd = get_random_long() & ((1UL << mmap_rnd_compat_bits) - 1); - else -#endif - rnd = get_random_long() & ((1UL << mmap_rnd_bits) - 1); - return rnd << PAGE_SHIFT; -} - -static unsigned long mmap_base(unsigned long rnd, struct rlimit *rlim_stack) -{ - unsigned long gap = rlim_stack->rlim_cur; - unsigned long pad = (STACK_RND_MASK << PAGE_SHIFT) + stack_guard_gap; - - /* Values close to RLIM_INFINITY can overflow. */ - if (gap + pad > gap) - gap += pad; - - if (gap < MIN_GAP) - gap = MIN_GAP; - else if (gap > MAX_GAP) - gap = MAX_GAP; - - return PAGE_ALIGN(STACK_TOP - gap - rnd); -} - -/* - * This function, called very early during the creation of a new process VM - * image, sets up which VM layout function to use: - */ -void arch_pick_mmap_layout(struct mm_struct *mm, struct rlimit *rlim_stack) -{ - unsigned long random_factor = 0UL; - - if (current->flags & PF_RANDOMIZE) - random_factor = arch_mmap_rnd(); - - /* - * Fall back to the standard layout if the personality bit is set, or - * if the expected stack growth is unlimited: - */ - if (mmap_is_legacy(rlim_stack)) { - mm->mmap_base = TASK_UNMAPPED_BASE + random_factor; - mm->get_unmapped_area = arch_get_unmapped_area; - } else { - mm->mmap_base = mmap_base(random_factor, rlim_stack); - mm->get_unmapped_area = arch_get_unmapped_area_topdown; - } -} - -/* * You really shouldn't be using read() or write() on /dev/mem. This might go * away in the future. */ diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c index e5ae8663f230..60c929f3683b 100644 --- a/arch/arm64/mm/mmu.c +++ b/arch/arm64/mm/mmu.c @@ -40,8 +40,9 @@ u64 idmap_t0sz = TCR_T0SZ(VA_BITS); u64 idmap_ptrs_per_pgd = PTRS_PER_PGD; -u64 vabits_user __ro_after_init; -EXPORT_SYMBOL(vabits_user); + +u64 __section(".mmuoff.data.write") vabits_actual; +EXPORT_SYMBOL(vabits_actual); u64 kimage_voffset __ro_after_init; EXPORT_SYMBOL(kimage_voffset); @@ -362,7 +363,7 @@ static void __create_pgd_mapping(pgd_t *pgdir, phys_addr_t phys, static phys_addr_t __pgd_pgtable_alloc(int shift) { - void *ptr = (void *)__get_free_page(PGALLOC_GFP); + void *ptr = (void *)__get_free_page(GFP_PGTABLE_KERNEL); BUG_ON(!ptr); /* Ensure the zeroed page is visible to the page table walker */ @@ -383,7 +384,7 @@ static phys_addr_t pgd_pgtable_alloc(int shift) * folded, and if so pgtable_pmd_page_ctor() becomes nop. */ if (shift == PAGE_SHIFT) - BUG_ON(!pgtable_page_ctor(phys_to_page(pa))); + BUG_ON(!pgtable_pte_page_ctor(phys_to_page(pa))); else if (shift == PMD_SHIFT) BUG_ON(!pgtable_pmd_page_ctor(phys_to_page(pa))); @@ -398,7 +399,7 @@ static phys_addr_t pgd_pgtable_alloc(int shift) static void __init create_mapping_noalloc(phys_addr_t phys, unsigned long virt, phys_addr_t size, pgprot_t prot) { - if (virt < VMALLOC_START) { + if ((virt >= PAGE_END) && (virt < VMALLOC_START)) { pr_warn("BUG: not creating mapping for %pa at 0x%016lx - outside kernel range\n", &phys, virt); return; @@ -425,7 +426,7 @@ void __init create_pgd_mapping(struct mm_struct *mm, phys_addr_t phys, static void update_mapping_prot(phys_addr_t phys, unsigned long virt, phys_addr_t size, pgprot_t prot) { - if (virt < VMALLOC_START) { + if ((virt >= PAGE_END) && (virt < VMALLOC_START)) { pr_warn("BUG: not updating mapping for %pa at 0x%016lx - outside kernel range\n", &phys, virt); return; @@ -646,6 +647,8 @@ static void __init map_kernel(pgd_t *pgdp) set_pgd(pgd_offset_raw(pgdp, FIXADDR_START), READ_ONCE(*pgd_offset_k(FIXADDR_START))); } else if (CONFIG_PGTABLE_LEVELS > 3) { + pgd_t *bm_pgdp; + pud_t *bm_pudp; /* * The fixmap shares its top level pgd entry with the kernel * mapping. This can really only occur when we are running @@ -653,9 +656,9 @@ static void __init map_kernel(pgd_t *pgdp) * entry instead. */ BUG_ON(!IS_ENABLED(CONFIG_ARM64_16K_PAGES)); - pud_populate(&init_mm, - pud_set_fixmap_offset(pgdp, FIXADDR_START), - lm_alias(bm_pmd)); + bm_pgdp = pgd_offset_raw(pgdp, FIXADDR_START); + bm_pudp = pud_set_fixmap_offset(bm_pgdp, FIXADDR_START); + pud_populate(&init_mm, bm_pudp, lm_alias(bm_pmd)); pud_clear_fixmap(); } else { BUG(); @@ -765,7 +768,7 @@ int __meminit vmemmap_populate(unsigned long start, unsigned long end, int node, return 0; } -#endif /* CONFIG_ARM64_64K_PAGES */ +#endif /* !ARM64_SWAPPER_USES_SECTION_MAPS */ void vmemmap_free(unsigned long start, unsigned long end, struct vmem_altmap *altmap) { @@ -876,7 +879,7 @@ void __set_fixmap(enum fixed_addresses idx, } } -void *__init __fixmap_remap_fdt(phys_addr_t dt_phys, int *size, pgprot_t prot) +void *__init fixmap_remap_fdt(phys_addr_t dt_phys, int *size, pgprot_t prot) { const u64 dt_virt_base = __fix_to_virt(FIX_FDT); int offset; @@ -929,17 +932,9 @@ void *__init __fixmap_remap_fdt(phys_addr_t dt_phys, int *size, pgprot_t prot) return dt_virt; } -void *__init fixmap_remap_fdt(phys_addr_t dt_phys) +int __init arch_ioremap_p4d_supported(void) { - void *dt_virt; - int size; - - dt_virt = __fixmap_remap_fdt(dt_phys, &size, PAGE_KERNEL_RO); - if (!dt_virt) - return NULL; - - memblock_reserve(dt_phys, size); - return dt_virt; + return 0; } int __init arch_ioremap_pud_supported(void) @@ -960,32 +955,28 @@ int __init arch_ioremap_pmd_supported(void) int pud_set_huge(pud_t *pudp, phys_addr_t phys, pgprot_t prot) { - pgprot_t sect_prot = __pgprot(PUD_TYPE_SECT | - pgprot_val(mk_sect_prot(prot))); - pud_t new_pud = pfn_pud(__phys_to_pfn(phys), sect_prot); + pud_t new_pud = pfn_pud(__phys_to_pfn(phys), mk_pud_sect_prot(prot)); /* Only allow permission changes for now */ if (!pgattr_change_is_safe(READ_ONCE(pud_val(*pudp)), pud_val(new_pud))) return 0; - BUG_ON(phys & ~PUD_MASK); + VM_BUG_ON(phys & ~PUD_MASK); set_pud(pudp, new_pud); return 1; } int pmd_set_huge(pmd_t *pmdp, phys_addr_t phys, pgprot_t prot) { - pgprot_t sect_prot = __pgprot(PMD_TYPE_SECT | - pgprot_val(mk_sect_prot(prot))); - pmd_t new_pmd = pfn_pmd(__phys_to_pfn(phys), sect_prot); + pmd_t new_pmd = pfn_pmd(__phys_to_pfn(phys), mk_pmd_sect_prot(prot)); /* Only allow permission changes for now */ if (!pgattr_change_is_safe(READ_ONCE(pmd_val(*pmdp)), pmd_val(new_pmd))) return 0; - BUG_ON(phys & ~PMD_MASK); + VM_BUG_ON(phys & ~PMD_MASK); set_pmd(pmdp, new_pmd); return 1; } @@ -1073,4 +1064,21 @@ int arch_add_memory(int nid, u64 start, u64 size, return __add_pages(nid, start >> PAGE_SHIFT, size >> PAGE_SHIFT, restrictions); } +void arch_remove_memory(int nid, u64 start, u64 size, + struct vmem_altmap *altmap) +{ + unsigned long start_pfn = start >> PAGE_SHIFT; + unsigned long nr_pages = size >> PAGE_SHIFT; + struct zone *zone; + + /* + * FIXME: Cleanup page tables (also in arch_add_memory() in case + * adding fails). Until then, this function should only be used + * during memory hotplug (adding memory), not for memory + * unplug. ARCH_ENABLE_MEMORY_HOTREMOVE must not be + * unlocked yet. + */ + zone = page_zone(pfn_to_page(start_pfn)); + __remove_pages(zone, start_pfn, nr_pages, altmap); +} #endif diff --git a/arch/arm64/mm/numa.c b/arch/arm64/mm/numa.c index 4f241cc7cc3b..4decf1659700 100644 --- a/arch/arm64/mm/numa.c +++ b/arch/arm64/mm/numa.c @@ -29,7 +29,7 @@ static __init int numa_parse_early_param(char *opt) { if (!opt) return -EINVAL; - if (!strncmp(opt, "off", 3)) + if (str_has_prefix(opt, "off")) numa_off = true; return 0; diff --git a/arch/arm64/mm/pageattr.c b/arch/arm64/mm/pageattr.c index 47b057bfa803..9ce7bd9d4d9c 100644 --- a/arch/arm64/mm/pageattr.c +++ b/arch/arm64/mm/pageattr.c @@ -19,8 +19,7 @@ struct page_change_data { bool rodata_full __ro_after_init = IS_ENABLED(CONFIG_RODATA_FULL_DEFAULT_ENABLED); -static int change_page_range(pte_t *ptep, pgtable_t token, unsigned long addr, - void *data) +static int change_page_range(pte_t *ptep, unsigned long addr, void *data) { struct page_change_data *cdata = data; pte_t pte = READ_ONCE(*ptep); @@ -129,7 +128,6 @@ int set_memory_nx(unsigned long addr, int numpages) __pgprot(PTE_PXN), __pgprot(0)); } -EXPORT_SYMBOL_GPL(set_memory_nx); int set_memory_x(unsigned long addr, int numpages) { @@ -137,7 +135,6 @@ int set_memory_x(unsigned long addr, int numpages) __pgprot(0), __pgprot(PTE_PXN)); } -EXPORT_SYMBOL_GPL(set_memory_x); int set_memory_valid(unsigned long addr, int numpages, int enable) { @@ -151,17 +148,48 @@ int set_memory_valid(unsigned long addr, int numpages, int enable) __pgprot(PTE_VALID)); } -#ifdef CONFIG_DEBUG_PAGEALLOC +int set_direct_map_invalid_noflush(struct page *page) +{ + struct page_change_data data = { + .set_mask = __pgprot(0), + .clear_mask = __pgprot(PTE_VALID), + }; + + if (!rodata_full) + return 0; + + return apply_to_page_range(&init_mm, + (unsigned long)page_address(page), + PAGE_SIZE, change_page_range, &data); +} + +int set_direct_map_default_noflush(struct page *page) +{ + struct page_change_data data = { + .set_mask = __pgprot(PTE_VALID | PTE_WRITE), + .clear_mask = __pgprot(PTE_RDONLY), + }; + + if (!rodata_full) + return 0; + + return apply_to_page_range(&init_mm, + (unsigned long)page_address(page), + PAGE_SIZE, change_page_range, &data); +} + void __kernel_map_pages(struct page *page, int numpages, int enable) { + if (!debug_pagealloc_enabled() && !rodata_full) + return; + set_memory_valid((unsigned long)page_address(page), numpages, enable); } -#ifdef CONFIG_HIBERNATION + /* - * When built with CONFIG_DEBUG_PAGEALLOC and CONFIG_HIBERNATION, this function - * is used to determine if a linear map page has been marked as not-valid by - * CONFIG_DEBUG_PAGEALLOC. Walk the page table and check the PTE_VALID bit. - * This is based on kern_addr_valid(), which almost does what we need. + * This function is used to determine if a linear map page has been marked as + * not-valid. Walk the page table and check the PTE_VALID bit. This is based + * on kern_addr_valid(), which almost does what we need. * * Because this is only called on the kernel linear map, p?d_sect() implies * p?d_present(). When debug_pagealloc is enabled, sections mappings are @@ -175,6 +203,9 @@ bool kernel_page_present(struct page *page) pte_t *ptep; unsigned long addr = (unsigned long)page_address(page); + if (!debug_pagealloc_enabled() && !rodata_full) + return true; + pgdp = pgd_offset_k(addr); if (pgd_none(READ_ONCE(*pgdp))) return false; @@ -196,5 +227,3 @@ bool kernel_page_present(struct page *page) ptep = pte_offset_kernel(pmdp, addr); return pte_valid(READ_ONCE(*ptep)); } -#endif /* CONFIG_HIBERNATION */ -#endif /* CONFIG_DEBUG_PAGEALLOC */ diff --git a/arch/arm64/mm/pgd.c b/arch/arm64/mm/pgd.c index 9a0c7d5090d6..4a64089e5771 100644 --- a/arch/arm64/mm/pgd.c +++ b/arch/arm64/mm/pgd.c @@ -19,10 +19,12 @@ static struct kmem_cache *pgd_cache __ro_after_init; pgd_t *pgd_alloc(struct mm_struct *mm) { + gfp_t gfp = GFP_PGTABLE_USER; + if (PGD_SIZE == PAGE_SIZE) - return (pgd_t *)__get_free_page(PGALLOC_GFP); + return (pgd_t *)__get_free_page(gfp); else - return kmem_cache_alloc(pgd_cache, PGALLOC_GFP); + return kmem_cache_alloc(pgd_cache, gfp); } void pgd_free(struct mm_struct *mm, pgd_t *pgd) @@ -33,7 +35,7 @@ void pgd_free(struct mm_struct *mm, pgd_t *pgd) kmem_cache_free(pgd_cache, pgd); } -void __init pgd_cache_init(void) +void __init pgtable_cache_init(void) { if (PGD_SIZE == PAGE_SIZE) return; diff --git a/arch/arm64/mm/proc.S b/arch/arm64/mm/proc.S index 7dbf2be470f6..a1e0592d1fbc 100644 --- a/arch/arm64/mm/proc.S +++ b/arch/arm64/mm/proc.S @@ -168,7 +168,7 @@ ENDPROC(cpu_do_switch_mm) .macro __idmap_cpu_set_reserved_ttbr1, tmp1, tmp2 adrp \tmp1, empty_zero_page phys_to_ttbr \tmp2, \tmp1 - offset_ttbr1 \tmp2 + offset_ttbr1 \tmp2, \tmp1 msr ttbr1_el1, \tmp2 isb tlbi vmalle1 @@ -187,7 +187,7 @@ ENTRY(idmap_cpu_replace_ttbr1) __idmap_cpu_set_reserved_ttbr1 x1, x3 - offset_ttbr1 x0 + offset_ttbr1 x0, x3 msr ttbr1_el1, x0 isb @@ -286,6 +286,15 @@ skip_pgd: msr sctlr_el1, x18 isb + /* + * Invalidate the local I-cache so that any instructions fetched + * speculatively from the PoC are discarded, since they may have + * been dynamically patched at the PoU. + */ + ic iallu + dsb nsh + isb + /* Set the flag to zero to indicate that we're all done */ str wzr, [flag_ptr] ret @@ -362,7 +371,7 @@ __idmap_kpti_secondary: cbnz w18, 1b /* All done, act like nothing happened */ - offset_ttbr1 swapper_ttb + offset_ttbr1 swapper_ttb, x18 msr ttbr1_el1, swapper_ttb isb ret @@ -438,10 +447,11 @@ ENTRY(__cpu_setup) TCR_TBI0 | TCR_A1 | TCR_KASAN_FLAGS tcr_clear_errata_bits x10, x9, x5 -#ifdef CONFIG_ARM64_USER_VA_BITS_52 - ldr_l x9, vabits_user +#ifdef CONFIG_ARM64_VA_BITS_52 + ldr_l x9, vabits_actual sub x9, xzr, x9 add x9, x9, #64 + tcr_set_t1sz x10, x9 #else ldr_l x9, idmap_t0sz #endif diff --git a/arch/arm64/net/bpf_jit.h b/arch/arm64/net/bpf_jit.h index cb7ab50b7657..eb73f9f72c46 100644 --- a/arch/arm64/net/bpf_jit.h +++ b/arch/arm64/net/bpf_jit.h @@ -171,6 +171,9 @@ /* Rd = Ra + Rn * Rm */ #define A64_MADD(sf, Rd, Ra, Rn, Rm) aarch64_insn_gen_data3(Rd, Ra, Rn, Rm, \ A64_VARIANT(sf), AARCH64_INSN_DATA3_MADD) +/* Rd = Ra - Rn * Rm */ +#define A64_MSUB(sf, Rd, Ra, Rn, Rm) aarch64_insn_gen_data3(Rd, Ra, Rn, Rm, \ + A64_VARIANT(sf), AARCH64_INSN_DATA3_MSUB) /* Rd = Rn * Rm */ #define A64_MUL(sf, Rd, Rn, Rm) A64_MADD(sf, Rd, A64_ZR, Rn, Rm) diff --git a/arch/arm64/net/bpf_jit_comp.c b/arch/arm64/net/bpf_jit_comp.c index 87c568807925..cdc79de0c794 100644 --- a/arch/arm64/net/bpf_jit_comp.c +++ b/arch/arm64/net/bpf_jit_comp.c @@ -409,8 +409,7 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx, break; case BPF_MOD: emit(A64_UDIV(is64, tmp, dst, src), ctx); - emit(A64_MUL(is64, tmp, tmp, src), ctx); - emit(A64_SUB(is64, dst, dst, tmp), ctx); + emit(A64_MSUB(is64, dst, dst, tmp, src), ctx); break; } break; @@ -516,8 +515,7 @@ emit_bswap_uxt: case BPF_ALU64 | BPF_MOD | BPF_K: emit_a64_mov_i(is64, tmp2, imm, ctx); emit(A64_UDIV(is64, tmp, dst, tmp2), ctx); - emit(A64_MUL(is64, tmp, tmp, tmp2), ctx); - emit(A64_SUB(is64, dst, dst, tmp), ctx); + emit(A64_MSUB(is64, dst, dst, tmp, tmp2), ctx); break; case BPF_ALU | BPF_LSH | BPF_K: case BPF_ALU64 | BPF_LSH | BPF_K: @@ -970,7 +968,7 @@ void *bpf_jit_alloc_exec(unsigned long size) { return __vmalloc_node_range(size, PAGE_SIZE, BPF_JIT_REGION_START, BPF_JIT_REGION_END, GFP_KERNEL, - PAGE_KERNEL_EXEC, 0, NUMA_NO_NODE, + PAGE_KERNEL, 0, NUMA_NO_NODE, __builtin_return_address(0)); } |