diff options
Diffstat (limited to 'arch/arm')
1204 files changed, 40433 insertions, 31650 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 1cacda426a0e..aa71a2321040 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -15,6 +15,7 @@ config ARM select GENERIC_IRQ_SHOW select GENERIC_PCI_IOMAP select GENERIC_SMP_IDLE_THREAD + select GENERIC_IDLE_POLL_SETUP select GENERIC_STRNCPY_FROM_USER select GENERIC_STRNLEN_USER select HARDIRQS_SW_RESEND @@ -58,6 +59,7 @@ config ARM select CLONE_BACKWARDS select OLD_SIGSUSPEND3 select OLD_SIGACTION + select HAVE_CONTEXT_TRACKING help The ARM series is a line of low-power-consumption RISC chip designs licensed by ARM Ltd and targeted at embedded applications and @@ -361,37 +363,6 @@ config ARCH_AT91 This enables support for systems based on Atmel AT91RM9200 and AT91SAM9* processors. -config ARCH_BCM2835 - bool "Broadcom BCM2835 family" - select ARCH_REQUIRE_GPIOLIB - select ARM_AMBA - select ARM_ERRATA_411920 - select ARM_TIMER_SP804 - select CLKDEV_LOOKUP - select CLKSRC_OF - select COMMON_CLK - select CPU_V6 - select GENERIC_CLOCKEVENTS - select MULTI_IRQ_HANDLER - select PINCTRL - select PINCTRL_BCM2835 - select SPARSE_IRQ - select USE_OF - help - This enables support for the Broadcom BCM2835 SoC. This SoC is - use in the Raspberry Pi, and Roku 2 devices. - -config ARCH_CNS3XXX - bool "Cavium Networks CNS3XXX family" - select ARM_GIC - select CPU_V6K - select GENERIC_CLOCKEVENTS - select MIGHT_HAVE_CACHE_L2X0 - select MIGHT_HAVE_PCI - select PCI_DOMAINS if PCI - help - Support for Cavium Networks CNS3XXX platform. - config ARCH_CLPS711X bool "Cirrus Logic CLPS711x/EP721x/EP731x-based" select ARCH_REQUIRE_GPIOLIB @@ -410,25 +381,11 @@ config ARCH_GEMINI bool "Cortina Systems Gemini" select ARCH_REQUIRE_GPIOLIB select ARCH_USES_GETTIMEOFFSET + select NEED_MACH_GPIO_H select CPU_FA526 help Support for the Cortina Systems Gemini family SoCs -config ARCH_SIRF - bool "CSR SiRF" - select ARCH_REQUIRE_GPIOLIB - select AUTO_ZRELADDR - select COMMON_CLK - select GENERIC_CLOCKEVENTS - select GENERIC_IRQ_CHIP - select MIGHT_HAVE_CACHE_L2X0 - select NO_IOPORT - select PINCTRL - select PINCTRL_SIRF - select USE_OF - help - Support for CSR SiRFprimaII/Marco/Polo platforms - config ARCH_EBSA110 bool "EBSA-110" select ARCH_USES_GETTIMEOFFSET @@ -468,21 +425,6 @@ config ARCH_FOOTBRIDGE Support for systems based on the DC21285 companion chip ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder. -config ARCH_MXS - bool "Freescale MXS-based" - select ARCH_REQUIRE_GPIOLIB - select CLKDEV_LOOKUP - select CLKSRC_MMIO - select COMMON_CLK - select GENERIC_CLOCKEVENTS - select HAVE_CLK_PREPARE - select MULTI_IRQ_HANDLER - select PINCTRL - select SPARSE_IRQ - select USE_OF - help - Support for Freescale MXS-based family of processors - config ARCH_NETX bool "Hilscher NetX based" select ARM_VIC @@ -492,14 +434,6 @@ config ARCH_NETX help This enables support for systems based on the Hilscher NetX Soc -config ARCH_H720X - bool "Hynix HMS720x-based" - select ARCH_USES_GETTIMEOFFSET - select CPU_ARM720T - select ISA_DMA_API - help - This enables support for systems based on the Hynix HMS720x - config ARCH_IOP13XX bool "IOP13xx-based" depends on MMU @@ -549,6 +483,8 @@ config ARCH_IXP4XX select GENERIC_CLOCKEVENTS select MIGHT_HAVE_PCI select NEED_MACH_IO_H + select USB_EHCI_BIG_ENDIAN_MMIO + select USB_EHCI_BIG_ENDIAN_DESC help Support for Intel's IXP4XX (XScale) family of processors. @@ -562,6 +498,7 @@ config ARCH_DOVE select PINCTRL_DOVE select PLAT_ORION_LEGACY select USB_ARCH_HAS_EHCI + select MVEBU_MBUS help Support for the Marvell Dove SoC 88AP510 @@ -575,6 +512,7 @@ config ARCH_KIRKWOOD select PINCTRL select PINCTRL_KIRKWOOD select PLAT_ORION_LEGACY + select MVEBU_MBUS help Support for the following Marvell Kirkwood series SoCs: 88F6180, 88F6192 and 88F6281. @@ -586,6 +524,7 @@ config ARCH_MV78XX0 select GENERIC_CLOCKEVENTS select PCI select PLAT_ORION_LEGACY + select MVEBU_MBUS help Support for the following Marvell MV78xx0 series SoCs: MV781x0, MV782x0. @@ -598,6 +537,7 @@ config ARCH_ORION5X select GENERIC_CLOCKEVENTS select PCI select PLAT_ORION_LEGACY + select MVEBU_MBUS help Support for the following Marvell Orion 5x series SoCs: Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182), @@ -661,24 +601,6 @@ config ARCH_LPC32XX help Support for the NXP LPC32XX family of processors -config ARCH_TEGRA - bool "NVIDIA Tegra" - select ARCH_HAS_CPUFREQ - select ARCH_REQUIRE_GPIOLIB - select CLKDEV_LOOKUP - select CLKSRC_MMIO - select CLKSRC_OF - select COMMON_CLK - select GENERIC_CLOCKEVENTS - select HAVE_CLK - select HAVE_SMP - select MIGHT_HAVE_CACHE_L2X0 - select SPARSE_IRQ - select USE_OF - help - This enables support for NVIDIA Tegra based systems (Tegra APX, - Tegra 6xx and Tegra 2 series). - config ARCH_PXA bool "PXA2xx/PXA3xx-based" depends on MMU @@ -716,6 +638,8 @@ config ARCH_SHMOBILE bool "Renesas SH-Mobile / R-Mobile" select CLKDEV_LOOKUP select GENERIC_CLOCKEVENTS + select HAVE_ARM_SCU if SMP + select HAVE_ARM_TWD if LOCAL_TIMERS select HAVE_CLK select HAVE_MACH_CLKDEV select HAVE_SMP @@ -723,7 +647,7 @@ config ARCH_SHMOBILE select MULTI_IRQ_HANDLER select NEED_MACH_MEMORY_H select NO_IOPORT - select PINCTRL + select PINCTRL if ARCH_WANT_OPTIONAL_GPIOLIB select PM_GENERIC_DOMAINS if PM select SPARSE_IRQ help @@ -769,12 +693,15 @@ config ARCH_SA1100 config ARCH_S3C24XX bool "Samsung S3C24XX SoCs" select ARCH_HAS_CPUFREQ - select ARCH_USES_GETTIMEOFFSET + select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP + select CLKSRC_MMIO + select GENERIC_CLOCKEVENTS select HAVE_CLK select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG select HAVE_S3C_RTC if RTC_CLASS + select MULTI_IRQ_HANDLER select NEED_MACH_GPIO_H select NEED_MACH_IO_H help @@ -787,10 +714,11 @@ config ARCH_S3C64XX bool "Samsung S3C64XX" select ARCH_HAS_CPUFREQ select ARCH_REQUIRE_GPIOLIB - select ARCH_USES_GETTIMEOFFSET select ARM_VIC select CLKDEV_LOOKUP + select CLKSRC_MMIO select CPU_V6 + select GENERIC_CLOCKEVENTS select HAVE_CLK select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG @@ -824,9 +752,11 @@ config ARCH_S5P64X0 config ARCH_S5PC100 bool "Samsung S5PC100" - select ARCH_USES_GETTIMEOFFSET + select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP + select CLKSRC_MMIO select CPU_V7 + select GENERIC_CLOCKEVENTS select HAVE_CLK select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG @@ -859,6 +789,7 @@ config ARCH_EXYNOS select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_SPARSEMEM_ENABLE select CLKDEV_LOOKUP + select COMMON_CLK select CPU_V7 select GENERIC_CLOCKEVENTS select HAVE_CLK @@ -901,51 +832,6 @@ config ARCH_U300 help Support for ST-Ericsson U300 series mobile platforms. -config ARCH_U8500 - bool "ST-Ericsson U8500 Series" - depends on MMU - select ARCH_HAS_CPUFREQ - select ARCH_REQUIRE_GPIOLIB - select ARM_AMBA - select CLKDEV_LOOKUP - select CPU_V7 - select GENERIC_CLOCKEVENTS - select HAVE_SMP - select MIGHT_HAVE_CACHE_L2X0 - select SPARSE_IRQ - help - Support for ST-Ericsson's Ux500 architecture - -config ARCH_NOMADIK - bool "STMicroelectronics Nomadik" - select ARCH_REQUIRE_GPIOLIB - select ARM_AMBA - select ARM_VIC - select CLKSRC_NOMADIK_MTU - select COMMON_CLK - select CPU_ARM926T - select GENERIC_CLOCKEVENTS - select MIGHT_HAVE_CACHE_L2X0 - select USE_OF - select PINCTRL - select PINCTRL_STN8815 - select SPARSE_IRQ - help - Support for the Nomadik platform by ST-Ericsson - -config PLAT_SPEAR - bool "ST SPEAr" - select ARCH_HAS_CPUFREQ - select ARCH_REQUIRE_GPIOLIB - select ARM_AMBA - select CLKDEV_LOOKUP - select CLKSRC_MMIO - select COMMON_CLK - select GENERIC_CLOCKEVENTS - select HAVE_CLK - help - Support for ST's SPEAr platform (SPEAr3xx, SPEAr6xx and SPEAr13xx). - config ARCH_DAVINCI bool "TI DaVinci" select ARCH_HAS_HOLES_MEMORYMODEL @@ -1037,6 +923,8 @@ source "arch/arm/mach-at91/Kconfig" source "arch/arm/mach-bcm/Kconfig" +source "arch/arm/mach-bcm2835/Kconfig" + source "arch/arm/mach-clps711x/Kconfig" source "arch/arm/mach-cns3xxx/Kconfig" @@ -1051,8 +939,6 @@ source "arch/arm/mach-footbridge/Kconfig" source "arch/arm/mach-gemini/Kconfig" -source "arch/arm/mach-h720x/Kconfig" - source "arch/arm/mach-highbank/Kconfig" source "arch/arm/mach-integrator/Kconfig" @@ -1104,7 +990,7 @@ source "arch/arm/plat-samsung/Kconfig" source "arch/arm/mach-socfpga/Kconfig" -source "arch/arm/plat-spear/Kconfig" +source "arch/arm/mach-spear/Kconfig" source "arch/arm/mach-s3c24xx/Kconfig" @@ -1173,7 +1059,7 @@ config PLAT_VERSATILE config ARM_TIMER_SP804 bool select CLKSRC_MMIO - select HAVE_SCHED_CLOCK + select CLKSRC_OF if OF source arch/arm/mm/Kconfig @@ -1532,7 +1418,6 @@ config SMP depends on GENERIC_CLOCKEVENTS depends on HAVE_SMP depends on MMU - select HAVE_ARM_SCU if !ARCH_MSM_SCORPIONMP select USE_GENERIC_SMP_HELPERS help This enables support for systems with more than one CPU. If you have @@ -1603,9 +1488,18 @@ config HAVE_ARM_ARCH_TIMER config HAVE_ARM_TWD bool depends on SMP + select CLKSRC_OF if OF help This options enables support for the ARM timer and watchdog unit +config MCPM + bool "Multi-Cluster Power Management" + depends on CPU_V7 && SMP + help + This option provides the common power management infrastructure + for (multi-)cluster based systems, such as big.LITTLE based + systems. + choice prompt "Memory split" default VMSPLIT_3G @@ -1656,7 +1550,6 @@ config LOCAL_TIMERS bool "Use local timer interrupts" depends on SMP default y - select HAVE_ARM_TWD if (!ARCH_MSM_SCORPIONMP && !EXYNOS4_MCT) help Enable support for local timers on SMP platforms, rather then the legacy IPI broadcast method. Local timers allows the system @@ -1670,8 +1563,9 @@ config ARCH_NR_GPIO int default 1024 if ARCH_SHMOBILE || ARCH_TEGRA default 512 if SOC_OMAP5 - default 355 if ARCH_U8500 - default 288 if ARCH_VT8500 || ARCH_SUNXI + default 392 if ARCH_U8500 + default 352 if ARCH_VT8500 + default 288 if ARCH_SUNXI default 264 if MACH_H4700 default 0 help @@ -1693,8 +1587,9 @@ config SCHED_HRTICK def_bool HIGH_RES_TIMERS config THUMB2_KERNEL - bool "Compile the kernel in Thumb-2 mode" + bool "Compile the kernel in Thumb-2 mode" if !CPU_THUMBONLY depends on CPU_V7 && !CPU_V6 && !CPU_V6K + default y if CPU_THUMBONLY select AEABI select ARM_ASM_UNIFIED select ARM_UNWIND @@ -1899,6 +1794,7 @@ config XEN depends on ARM && AEABI && OF depends on CPU_V7 && !CPU_V6 depends on !GENERIC_ATOMIC64 + select ARM_PSCI help Say Y if you want to run Linux in a Virtual Machine on Xen on ARM. @@ -2160,40 +2056,8 @@ endmenu menu "CPU Power Management" if ARCH_HAS_CPUFREQ - source "drivers/cpufreq/Kconfig" -config CPU_FREQ_IMX - tristate "CPUfreq driver for i.MX CPUs" - depends on ARCH_MXC && CPU_FREQ - select CPU_FREQ_TABLE - help - This enables the CPUfreq driver for i.MX CPUs. - -config CPU_FREQ_SA1100 - bool - -config CPU_FREQ_SA1110 - bool - -config CPU_FREQ_INTEGRATOR - tristate "CPUfreq driver for ARM Integrator CPUs" - depends on ARCH_INTEGRATOR && CPU_FREQ - default y - help - This enables the CPUfreq driver for ARM Integrator CPUs. - - For details, take a look at <file:Documentation/cpu-freq>. - - If in doubt, say Y. - -config CPU_FREQ_PXA - bool - depends on CPU_FREQ && ARCH_PXA && PXA25x - default y - select CPU_FREQ_DEFAULT_GOV_USERSPACE - select CPU_FREQ_TABLE - config CPU_FREQ_S3C bool help diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 9b31f4311ea2..1d41908d5cda 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -89,6 +89,10 @@ choice bool "Kernel low-level debugging on 9263 and 9g45" depends on HAVE_AT91_DBGU1 + config DEBUG_BCM2835 + bool "Kernel low-level debugging on BCM2835 PL011 UART" + depends on ARCH_BCM2835 + config DEBUG_CLPS711X_UART1 bool "Kernel low-level debugging messages via UART1" depends on ARCH_CLPS711X @@ -103,6 +107,13 @@ choice Say Y here if you want the debug print routines to direct their output to the second serial port on these devices. + config DEBUG_CNS3XXX + bool "Kernel Kernel low-level debugging on Cavium Networks CNS3xxx" + depends on ARCH_CNS3XXX + help + Say Y here if you want the debug print routines to direct + their output to the CNS3xxx UART0. + config DEBUG_DAVINCI_DA8XX_UART1 bool "Kernel low-level debugging on DaVinci DA8XX using UART1" depends on ARCH_DAVINCI_DA8XX @@ -234,11 +245,11 @@ choice on i.MX53. config DEBUG_IMX6Q_UART - bool "i.MX6Q Debug UART" + bool "i.MX6Q/DL Debug UART" depends on SOC_IMX6Q help Say Y here if you want kernel low-level debugging support - on i.MX6Q. + on i.MX6Q/DL. config DEBUG_MMP_UART2 bool "Kernel low-level debugging message via MMP UART2" @@ -298,6 +309,13 @@ choice Say Y here if you want kernel low-level debugging support on MVEBU based platforms. + config DEBUG_NOMADIK_UART + bool "Kernel low-level debugging messages via NOMADIK UART" + depends on ARCH_NOMADIK + help + Say Y here if you want kernel low-level debugging support + on NOMADIK based platforms. + config DEBUG_OMAP2PLUS_UART bool "Kernel low-level debugging messages via OMAP2PLUS UART" depends on ARCH_OMAP2PLUS @@ -312,6 +330,13 @@ choice Say Y here if you want kernel low-level debugging support on PicoXcell based platforms. + config DEBUG_PXA_UART1 + depends on ARCH_PXA + bool "Use PXA UART1 for low-level debug" + help + Say Y here if you want kernel low-level debugging support + on PXA UART1. + config DEBUG_REALVIEW_STD_PORT bool "RealView Default UART" depends on ARCH_REALVIEW @@ -330,6 +355,7 @@ choice config DEBUG_S3C_UART0 depends on PLAT_SAMSUNG + select DEBUG_EXYNOS_UART if ARCH_EXYNOS bool "Use S3C UART 0 for low-level debug" help Say Y here if you want the debug print routines to direct @@ -341,6 +367,7 @@ choice config DEBUG_S3C_UART1 depends on PLAT_SAMSUNG + select DEBUG_EXYNOS_UART if ARCH_EXYNOS bool "Use S3C UART 1 for low-level debug" help Say Y here if you want the debug print routines to direct @@ -352,6 +379,7 @@ choice config DEBUG_S3C_UART2 depends on PLAT_SAMSUNG + select DEBUG_EXYNOS_UART if ARCH_EXYNOS bool "Use S3C UART 2 for low-level debug" help Say Y here if you want the debug print routines to direct @@ -363,6 +391,7 @@ choice config DEBUG_S3C_UART3 depends on PLAT_SAMSUNG && ARCH_EXYNOS + select DEBUG_EXYNOS_UART bool "Use S3C UART 3 for low-level debug" help Say Y here if you want the debug print routines to direct @@ -414,6 +443,13 @@ choice Say Y here if you want the debug print routines to direct their output to the uart1 port on SiRFmarco devices. + config DEBUG_UX500_UART + depends on ARCH_U8500 + bool "Use Ux500 UART for low-level debug" + help + Say Y here if you want kernel low-level debugging support + on Ux500 based platforms. + config DEBUG_VEXPRESS_UART0_DETECT bool "Autodetect UART0 on Versatile Express Cortex-A core tiles" depends on ARCH_VEXPRESS && CPU_CP15_MMU @@ -485,6 +521,9 @@ choice endchoice +config DEBUG_EXYNOS_UART + bool + config DEBUG_IMX_UART_PORT int "i.MX Debug UART Port Selection" if DEBUG_IMX1_UART || \ DEBUG_IMX25_UART || \ @@ -580,6 +619,10 @@ endchoice config DEBUG_LL_INCLUDE string + default "debug/bcm2835.S" if DEBUG_BCM2835 + default "debug/cns3xxx.S" if DEBUG_CNS3XXX + default "debug/exynos.S" if DEBUG_EXYNOS_UART + default "debug/highbank.S" if DEBUG_HIGHBANK_UART default "debug/icedcc.S" if DEBUG_ICEDCC default "debug/imx.S" if DEBUG_IMX1_UART || \ DEBUG_IMX25_UART || \ @@ -589,19 +632,35 @@ config DEBUG_LL_INCLUDE DEBUG_IMX51_UART || \ DEBUG_IMX53_UART ||\ DEBUG_IMX6Q_UART - default "debug/highbank.S" if DEBUG_HIGHBANK_UART default "debug/mvebu.S" if DEBUG_MVEBU_UART + default "debug/mxs.S" if DEBUG_IMX23_UART || DEBUG_IMX28_UART + default "debug/nomadik.S" if DEBUG_NOMADIK_UART default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART default "debug/picoxcell.S" if DEBUG_PICOXCELL_UART + default "debug/pxa.S" if DEBUG_PXA_UART1 || DEBUG_MMP_UART2 || \ + DEBUG_MMP_UART3 + default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1 default "debug/socfpga.S" if DEBUG_SOCFPGA_UART default "debug/sunxi.S" if DEBUG_SUNXI_UART0 || DEBUG_SUNXI_UART1 + default "debug/tegra.S" if DEBUG_TEGRA_UART + default "debug/ux500.S" if DEBUG_UX500_UART default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT || \ DEBUG_VEXPRESS_UART0_CA9 || DEBUG_VEXPRESS_UART0_RS1 default "debug/vt8500.S" if DEBUG_VT8500_UART0 - default "debug/tegra.S" if DEBUG_TEGRA_UART default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1 default "mach/debug-macro.S" +config DEBUG_UNCOMPRESS + bool + default y if ARCH_MULTIPLATFORM && DEBUG_LL && \ + !DEBUG_OMAP2PLUS_UART && \ + !DEBUG_TEGRA_UART + +config UNCOMPRESS_INCLUDE + string + default "debug/uncompress.h" if ARCH_MULTIPLATFORM + default "mach/uncompress.h" + config EARLY_PRINTK bool "Early printk" depends on DEBUG_LL diff --git a/arch/arm/Makefile b/arch/arm/Makefile index ee4605f400b0..47374085befd 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -147,7 +147,6 @@ machine-$(CONFIG_ARCH_DOVE) += dove machine-$(CONFIG_ARCH_EBSA110) += ebsa110 machine-$(CONFIG_ARCH_EP93XX) += ep93xx machine-$(CONFIG_ARCH_GEMINI) += gemini -machine-$(CONFIG_ARCH_H720X) += h720x machine-$(CONFIG_ARCH_HIGHBANK) += highbank machine-$(CONFIG_ARCH_INTEGRATOR) += integrator machine-$(CONFIG_ARCH_IOP13XX) += iop13xx @@ -191,9 +190,7 @@ machine-$(CONFIG_ARCH_VT8500) += vt8500 machine-$(CONFIG_ARCH_W90X900) += w90x900 machine-$(CONFIG_FOOTBRIDGE) += footbridge machine-$(CONFIG_ARCH_SOCFPGA) += socfpga -machine-$(CONFIG_ARCH_SPEAR13XX) += spear13xx -machine-$(CONFIG_ARCH_SPEAR3XX) += spear3xx -machine-$(CONFIG_MACH_SPEAR600) += spear6xx +machine-$(CONFIG_PLAT_SPEAR) += spear machine-$(CONFIG_ARCH_VIRT) += virt machine-$(CONFIG_ARCH_ZYNQ) += zynq machine-$(CONFIG_ARCH_SUNXI) += sunxi @@ -207,7 +204,6 @@ plat-$(CONFIG_PLAT_ORION) += orion plat-$(CONFIG_PLAT_PXA) += pxa plat-$(CONFIG_PLAT_S3C24XX) += samsung plat-$(CONFIG_PLAT_S5P) += samsung -plat-$(CONFIG_PLAT_SPEAR) += spear plat-$(CONFIG_PLAT_VERSATILE) += versatile ifeq ($(CONFIG_ARCH_EBSA110),y) diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index afed28e37ea5..3580d57ea218 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -24,6 +24,9 @@ endif AFLAGS_head.o += -DTEXT_OFFSET=$(TEXT_OFFSET) HEAD = head.o OBJS += misc.o decompress.o +ifeq ($(CONFIG_DEBUG_UNCOMPRESS),y) +OBJS += debug.o +endif FONTC = $(srctree)/drivers/video/console/font_acorn_8x8.c # string library code (-Os is enforced to keep it much smaller) diff --git a/arch/arm/boot/compressed/debug.S b/arch/arm/boot/compressed/debug.S new file mode 100644 index 000000000000..6e8382d5b7a4 --- /dev/null +++ b/arch/arm/boot/compressed/debug.S @@ -0,0 +1,12 @@ +#include <linux/linkage.h> +#include <asm/assembler.h> + +#include CONFIG_DEBUG_LL_INCLUDE + +ENTRY(putc) + addruart r1, r2, r3 + waituart r3, r1 + senduart r0, r1 + busyuart r3, r1 + mov pc, lr +ENDPROC(putc) diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c index df899834d84e..31bd43b82095 100644 --- a/arch/arm/boot/compressed/misc.c +++ b/arch/arm/boot/compressed/misc.c @@ -25,13 +25,7 @@ unsigned int __machine_arch_type; static void putstr(const char *ptr); extern void error(char *x); -#ifdef CONFIG_ARCH_MULTIPLATFORM -static inline void putc(int c) {} -static inline void flush(void) {} -static inline void arch_decomp_setup(void) {} -#else -#include <mach/uncompress.h> -#endif +#include CONFIG_UNCOMPRESS_INCLUDE #ifdef CONFIG_DEBUG_ICEDCC diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 9c6255884cbb..b9f7121e6ecf 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -3,6 +3,7 @@ ifeq ($(CONFIG_OF),y) # Keep at91 dtb files sorted alphabetically for each SoC # rm9200 dtb-$(CONFIG_ARCH_AT91) += at91rm9200ek.dtb +dtb-$(CONFIG_ARCH_AT91) += mpa1600.dtb # sam9260 dtb-$(CONFIG_ARCH_AT91) += animeo_ip.dtb dtb-$(CONFIG_ARCH_AT91) += aks-cdu.dtb @@ -26,11 +27,17 @@ dtb-$(CONFIG_ARCH_AT91) += pm9g45.dtb # sam9n12 dtb-$(CONFIG_ARCH_AT91) += at91sam9n12ek.dtb # sam9x5 +dtb-$(CONFIG_ARCH_AT91) += at91-ariag25.dtb dtb-$(CONFIG_ARCH_AT91) += at91sam9g15ek.dtb dtb-$(CONFIG_ARCH_AT91) += at91sam9g25ek.dtb dtb-$(CONFIG_ARCH_AT91) += at91sam9g35ek.dtb dtb-$(CONFIG_ARCH_AT91) += at91sam9x25ek.dtb dtb-$(CONFIG_ARCH_AT91) += at91sam9x35ek.dtb +# sama5d3 +dtb-$(CONFIG_ARCH_AT91) += sama5d31ek.dtb +dtb-$(CONFIG_ARCH_AT91) += sama5d33ek.dtb +dtb-$(CONFIG_ARCH_AT91) += sama5d34ek.dtb +dtb-$(CONFIG_ARCH_AT91) += sama5d35ek.dtb dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb dtb-$(CONFIG_ARCH_BCM) += bcm11351-brt.dtb @@ -42,7 +49,12 @@ dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ exynos4210-smdkv310.dtb \ exynos4210-trats.dtb \ + exynos4210-universal_c210.dtb \ + exynos4412-odroidx.dtb \ exynos4412-smdk4412.dtb \ + exynos4412-origen.dtb \ + exynos5250-arndale.dtb \ + exynos5440-sd5v1.dtb \ exynos5250-smdk5250.dtb \ exynos5250-snow.dtb \ exynos5440-ssdk5440.dtb @@ -51,7 +63,8 @@ dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \ dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \ integratorcp.dtb dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb -dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \ +dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \ + kirkwood-dns320.dtb \ kirkwood-dns325.dtb \ kirkwood-dockstar.dtb \ kirkwood-dreamplug.dtb \ @@ -65,6 +78,7 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \ kirkwood-lschlv2.dtb \ kirkwood-lsxhl.dtb \ kirkwood-mplcec4.dtb \ + kirkwood-netgear_readynas_duo_v2.dtb \ kirkwood-ns2.dtb \ kirkwood-ns2lite.dtb \ kirkwood-ns2max.dtb \ @@ -87,19 +101,26 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx25-karo-tx25.dtb \ imx25-pdk.dtb \ imx27-apf27.dtb \ + imx27-apf27dev.dtb \ imx27-pdk.dtb \ + imx27-phytec-phycore.dtb \ imx31-bug.dtb \ imx51-apf51.dtb \ + imx51-apf51dev.dtb \ imx51-babbage.dtb \ imx53-ard.dtb \ imx53-evk.dtb \ imx53-mba53.dtb \ imx53-qsb.dtb \ imx53-smd.dtb \ + imx6dl-sabreauto.dtb \ + imx6dl-sabresd.dtb \ + imx6dl-wandboard.dtb \ imx6q-arm2.dtb \ imx6q-sabreauto.dtb \ imx6q-sabrelite.dtb \ - imx6q-sabresd.dtb + imx6q-sabresd.dtb \ + imx6q-sbc6x.dtb dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \ imx23-olinuxino.dtb \ imx23-stmp378x_devb.dtb \ @@ -115,10 +136,14 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \ imx28-tx28.dtb dtb-$(CONFIG_ARCH_NOMADIK) += ste-nomadik-s8815.dtb dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ + omap3430-sdp.dtb \ omap3-beagle.dtb \ + omap3-devkit8000.dtb \ omap3-beagle-xm.dtb \ omap3-evm.dtb \ omap3-tobi.dtb \ + omap3-igep0020.dtb \ + omap3-igep0030.dtb \ omap4-panda.dtb \ omap4-panda-a4.dtb \ omap4-panda-es.dtb \ @@ -136,7 +161,12 @@ dtb-$(CONFIG_ARCH_U8500) += snowball.dtb \ ccu9540.dtb dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \ r8a7740-armadillo800eva.dtb \ + r8a7778-bockw.dtb \ + r8a7779-marzen-reference.dtb \ + r8a7790-lager.dtb \ sh73a0-kzm9g.dtb \ + sh73a0-kzm9g-reference.dtb \ + r8a73a4-ape6evm.dtb \ sh7372-mackerel.dtb dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_cyclone5.dtb \ socfpga_vt.dtb @@ -165,11 +195,13 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ tegra30-cardhu-a04.dtb \ tegra114-dalmore.dtb \ tegra114-pluto.dtb +dtb-$(CONFIG_ARCH_VERSATILE) += versatile-ab.dtb \ + versatile-pb.dtb dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \ vexpress-v2p-ca9.dtb \ vexpress-v2p-ca15-tc1.dtb \ - vexpress-v2p-ca15_a7.dtb \ - xenvm-4.2.dtb + vexpress-v2p-ca15_a7.dtb +dtb-$(CONFIG_ARCH_VIRT) += xenvm-4.2.dtb dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \ wm8505-ref.dtb \ wm8650-mid.dtb \ diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts index 11b240c5d323..5302f79c05b7 100644 --- a/arch/arm/boot/dts/am335x-bone.dts +++ b/arch/arm/boot/dts/am335x-bone.dts @@ -43,7 +43,7 @@ status = "okay"; }; - i2c1: i2c@44e0b000 { + i2c0: i2c@44e0b000 { status = "okay"; clock-frequency = <400000>; @@ -59,27 +59,27 @@ led@2 { label = "beaglebone:green:heartbeat"; - gpios = <&gpio2 21 0>; + gpios = <&gpio1 21 0>; linux,default-trigger = "heartbeat"; default-state = "off"; }; led@3 { label = "beaglebone:green:mmc0"; - gpios = <&gpio2 22 0>; + gpios = <&gpio1 22 0>; linux,default-trigger = "mmc0"; default-state = "off"; }; led@4 { label = "beaglebone:green:usr2"; - gpios = <&gpio2 23 0>; + gpios = <&gpio1 23 0>; default-state = "off"; }; led@5 { label = "beaglebone:green:usr3"; - gpios = <&gpio2 24 0>; + gpios = <&gpio1 24 0>; default-state = "off"; }; }; diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index d6496440fcea..0423298a26fe 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -51,7 +51,7 @@ status = "okay"; }; - i2c1: i2c@44e0b000 { + i2c0: i2c@44e0b000 { status = "okay"; clock-frequency = <400000>; @@ -60,7 +60,7 @@ }; }; - i2c2: i2c@4802a000 { + i2c1: i2c@4802a000 { status = "okay"; clock-frequency = <100000>; @@ -123,12 +123,12 @@ debounce-delay-ms = <5>; col-scan-delay-us = <2>; - row-gpios = <&gpio2 25 0 /* Bank1, pin25 */ - &gpio2 26 0 /* Bank1, pin26 */ - &gpio2 27 0>; /* Bank1, pin27 */ + row-gpios = <&gpio1 25 0 /* Bank1, pin25 */ + &gpio1 26 0 /* Bank1, pin26 */ + &gpio1 27 0>; /* Bank1, pin27 */ - col-gpios = <&gpio2 21 0 /* Bank1, pin21 */ - &gpio2 22 0>; /* Bank1, pin22 */ + col-gpios = <&gpio1 21 0 /* Bank1, pin21 */ + &gpio1 22 0>; /* Bank1, pin22 */ linux,keymap = <0x0000008b /* MENU */ 0x0100009e /* BACK */ @@ -147,14 +147,14 @@ switch@9 { label = "volume-up"; linux,code = <115>; - gpios = <&gpio1 2 1>; + gpios = <&gpio0 2 1>; gpio-key,wakeup; }; switch@10 { label = "volume-down"; linux,code = <114>; - gpios = <&gpio1 3 1>; + gpios = <&gpio0 3 1>; gpio-key,wakeup; }; }; diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index f5a6162a4ff2..f67c360844f4 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -58,7 +58,7 @@ status = "okay"; }; - i2c1: i2c@44e0b000 { + i2c0: i2c@44e0b000 { status = "okay"; clock-frequency = <400000>; @@ -115,26 +115,26 @@ led@1 { label = "evmsk:green:usr0"; - gpios = <&gpio2 4 0>; + gpios = <&gpio1 4 0>; default-state = "off"; }; led@2 { label = "evmsk:green:usr1"; - gpios = <&gpio2 5 0>; + gpios = <&gpio1 5 0>; default-state = "off"; }; led@3 { label = "evmsk:green:mmc0"; - gpios = <&gpio2 6 0>; + gpios = <&gpio1 6 0>; linux,default-trigger = "mmc0"; default-state = "off"; }; led@4 { label = "evmsk:green:heartbeat"; - gpios = <&gpio2 7 0>; + gpios = <&gpio1 7 0>; linux,default-trigger = "heartbeat"; default-state = "off"; }; @@ -148,26 +148,26 @@ switch@1 { label = "button0"; linux,code = <0x100>; - gpios = <&gpio3 3 0>; + gpios = <&gpio2 3 0>; }; switch@2 { label = "button1"; linux,code = <0x101>; - gpios = <&gpio3 2 0>; + gpios = <&gpio2 2 0>; }; switch@3 { label = "button2"; linux,code = <0x102>; - gpios = <&gpio1 30 0>; + gpios = <&gpio0 30 0>; gpio-key,wakeup; }; switch@4 { label = "button3"; linux,code = <0x103>; - gpios = <&gpio3 5 0>; + gpios = <&gpio2 5 0>; }; }; }; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 0957645b73af..d1101103aa51 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -21,6 +21,8 @@ serial3 = &uart4; serial4 = &uart5; serial5 = &uart6; + d_can0 = &dcan0; + d_can1 = &dcan1; }; cpus { @@ -87,7 +89,7 @@ reg = <0x48200000 0x1000>; }; - gpio1: gpio@44e07000 { + gpio0: gpio@44e07000 { compatible = "ti,omap4-gpio"; ti,hwmods = "gpio1"; gpio-controller; @@ -98,7 +100,7 @@ interrupts = <96>; }; - gpio2: gpio@4804c000 { + gpio1: gpio@4804c000 { compatible = "ti,omap4-gpio"; ti,hwmods = "gpio2"; gpio-controller; @@ -109,7 +111,7 @@ interrupts = <98>; }; - gpio3: gpio@481ac000 { + gpio2: gpio@481ac000 { compatible = "ti,omap4-gpio"; ti,hwmods = "gpio3"; gpio-controller; @@ -120,7 +122,7 @@ interrupts = <32>; }; - gpio4: gpio@481ae000 { + gpio3: gpio@481ae000 { compatible = "ti,omap4-gpio"; ti,hwmods = "gpio4"; gpio-controller; @@ -185,7 +187,7 @@ status = "disabled"; }; - i2c1: i2c@44e0b000 { + i2c0: i2c@44e0b000 { compatible = "ti,omap4-i2c"; #address-cells = <1>; #size-cells = <0>; @@ -195,7 +197,7 @@ status = "disabled"; }; - i2c2: i2c@4802a000 { + i2c1: i2c@4802a000 { compatible = "ti,omap4-i2c"; #address-cells = <1>; #size-cells = <0>; @@ -205,7 +207,7 @@ status = "disabled"; }; - i2c3: i2c@4819c000 { + i2c2: i2c@4819c000 { compatible = "ti,omap4-i2c"; #address-cells = <1>; #size-cells = <0>; @@ -225,7 +227,8 @@ dcan0: d_can@481cc000 { compatible = "bosch,d_can"; ti,hwmods = "d_can0"; - reg = <0x481cc000 0x2000>; + reg = <0x481cc000 0x2000 + 0x44e10644 0x4>; interrupts = <52>; status = "disabled"; }; @@ -233,13 +236,14 @@ dcan1: d_can@481d0000 { compatible = "bosch,d_can"; ti,hwmods = "d_can1"; - reg = <0x481d0000 0x2000>; + reg = <0x481d0000 0x2000 + 0x44e10644 0x4>; interrupts = <55>; status = "disabled"; }; timer1: timer@44e31000 { - compatible = "ti,omap2-timer"; + compatible = "ti,am335x-timer-1ms"; reg = <0x44e31000 0x400>; interrupts = <67>; ti,hwmods = "timer1"; @@ -247,21 +251,21 @@ }; timer2: timer@48040000 { - compatible = "ti,omap2-timer"; + compatible = "ti,am335x-timer"; reg = <0x48040000 0x400>; interrupts = <68>; ti,hwmods = "timer2"; }; timer3: timer@48042000 { - compatible = "ti,omap2-timer"; + compatible = "ti,am335x-timer"; reg = <0x48042000 0x400>; interrupts = <69>; ti,hwmods = "timer3"; }; timer4: timer@48044000 { - compatible = "ti,omap2-timer"; + compatible = "ti,am335x-timer"; reg = <0x48044000 0x400>; interrupts = <92>; ti,hwmods = "timer4"; @@ -269,7 +273,7 @@ }; timer5: timer@48046000 { - compatible = "ti,omap2-timer"; + compatible = "ti,am335x-timer"; reg = <0x48046000 0x400>; interrupts = <93>; ti,hwmods = "timer5"; @@ -277,7 +281,7 @@ }; timer6: timer@48048000 { - compatible = "ti,omap2-timer"; + compatible = "ti,am335x-timer"; reg = <0x48048000 0x400>; interrupts = <94>; ti,hwmods = "timer6"; @@ -285,7 +289,7 @@ }; timer7: timer@4804a000 { - compatible = "ti,omap2-timer"; + compatible = "ti,am335x-timer"; reg = <0x4804a000 0x400>; interrupts = <95>; ti,hwmods = "timer7"; @@ -305,7 +309,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x48030000 0x400>; - interrupt = <65>; + interrupts = <65>; ti,spi-num-cs = <2>; ti,hwmods = "spi0"; status = "disabled"; @@ -316,7 +320,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x481a0000 0x400>; - interrupt = <125>; + interrupts = <125>; ti,spi-num-cs = <2>; ti,hwmods = "spi1"; status = "disabled"; @@ -349,7 +353,7 @@ rx_descs = <64>; mac_control = <0x20>; slaves = <2>; - cpts_active_slave = <0>; + active_slave = <0>; cpts_clock_mult = <0x80000000>; cpts_clock_shift = <29>; reg = <0x4a100000 0x800 diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts index 474f760ecadf..e9b5bdae4908 100644 --- a/arch/arm/boot/dts/am3517-evm.dts +++ b/arch/arm/boot/dts/am3517-evm.dts @@ -7,7 +7,7 @@ */ /dts-v1/; -/include/ "omap3.dtsi" +/include/ "omap34xx.dtsi" / { model = "TI AM3517 EVM (AM3517/05)"; diff --git a/arch/arm/boot/dts/am3517_mt_ventoux.dts b/arch/arm/boot/dts/am3517_mt_ventoux.dts index 5eb26d7d9b4e..556868388a23 100644 --- a/arch/arm/boot/dts/am3517_mt_ventoux.dts +++ b/arch/arm/boot/dts/am3517_mt_ventoux.dts @@ -7,7 +7,7 @@ */ /dts-v1/; -/include/ "omap3.dtsi" +/include/ "omap34xx.dtsi" / { model = "TeeJet Mt.Ventoux"; diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts index e34b280ce6ec..2353b1f13704 100644 --- a/arch/arm/boot/dts/armada-370-db.dts +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -30,68 +30,87 @@ }; soc { - serial@d0012000 { - clock-frequency = <200000000>; - status = "okay"; - }; - sata@d00a0000 { - nr-ports = <2>; - status = "okay"; - }; + internal-regs { + serial@12000 { + clock-frequency = <200000000>; + status = "okay"; + }; + sata@a0000 { + nr-ports = <2>; + status = "okay"; + }; - mdio { - phy0: ethernet-phy@0 { - reg = <0>; + mdio { + phy0: ethernet-phy@0 { + reg = <0>; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + }; }; - phy1: ethernet-phy@1 { - reg = <1>; + ethernet@70000 { + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; + }; + ethernet@74000 { + status = "okay"; + phy = <&phy1>; + phy-mode = "rgmii-id"; }; - }; - ethernet@d0070000 { - status = "okay"; - phy = <&phy0>; - phy-mode = "rgmii-id"; - }; - ethernet@d0074000 { - status = "okay"; - phy = <&phy1>; - phy-mode = "rgmii-id"; - }; + mvsdio@d4000 { + pinctrl-0 = <&sdio_pins1>; + pinctrl-names = "default"; + /* + * This device is disabled by default, because + * using the SD card connector requires + * changing the default CON40 connector + * "DB-88F6710_MPP_2xRGMII_DEVICE_Jumper" to a + * different connector + * "DB-88F6710_MPP_RGMII_SD_Jumper". + */ + status = "disabled"; + /* No CD or WP GPIOs */ + }; - mvsdio@d00d4000 { - pinctrl-0 = <&sdio_pins1>; - pinctrl-names = "default"; - /* - * This device is disabled by default, because - * using the SD card connector requires - * changing the default CON40 connector - * "DB-88F6710_MPP_2xRGMII_DEVICE_Jumper" to a - * different connector - * "DB-88F6710_MPP_RGMII_SD_Jumper". - */ - status = "disabled"; - /* No CD or WP GPIOs */ - }; + usb@50000 { + status = "okay"; + }; - usb@d0050000 { - status = "okay"; - }; + usb@51000 { + status = "okay"; + }; - usb@d0051000 { - status = "okay"; - }; + spi0: spi@10600 { + status = "okay"; - spi0: spi@d0010600 { - status = "okay"; + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l25635e"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <50000000>; + }; + }; - spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "mx25l25635e"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <50000000>; + pcie-controller { + status = "okay"; + /* + * The two PCIe units are accessible through + * both standard PCIe slots and mini-PCIe + * slots on the board. + */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + pcie@2,0 { + /* Port 1, Lane 0 */ + status = "okay"; + }; }; }; }; diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts index 3234875824dc..14e36e19d515 100644 --- a/arch/arm/boot/dts/armada-370-mirabox.dts +++ b/arch/arm/boot/dts/armada-370-mirabox.dts @@ -25,50 +25,116 @@ }; soc { - serial@d0012000 { - clock-frequency = <200000000>; - status = "okay"; - }; - timer@d0020300 { - clock-frequency = <600000000>; - status = "okay"; - }; - mdio { - phy0: ethernet-phy@0 { - reg = <0>; + internal-regs { + serial@12000 { + clock-frequency = <200000000>; + status = "okay"; }; + timer@20300 { + clock-frequency = <600000000>; + status = "okay"; + }; + + pinctrl { + pwr_led_pin: pwr-led-pin { + marvell,pins = "mpp63"; + marvell,function = "gpo"; + }; - phy1: ethernet-phy@1 { - reg = <1>; + stat_led_pins: stat-led-pins { + marvell,pins = "mpp64", "mpp65"; + marvell,function = "gpio"; + }; }; - }; - ethernet@d0070000 { - status = "okay"; - phy = <&phy0>; - phy-mode = "rgmii-id"; - }; - ethernet@d0074000 { - status = "okay"; - phy = <&phy1>; - phy-mode = "rgmii-id"; - }; - mvsdio@d00d4000 { - pinctrl-0 = <&sdio_pins3>; - pinctrl-names = "default"; - status = "okay"; - /* - * No CD or WP GPIOs: SDIO interface used for - * Wifi/Bluetooth chip - */ - }; + gpio_leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pwr_led_pin &stat_led_pins>; - usb@d0050000 { - status = "okay"; - }; + green_pwr_led { + label = "mirabox:green:pwr"; + gpios = <&gpio1 31 1>; + linux,default-trigger = "heartbeat"; + }; + + blue_stat_led { + label = "mirabox:blue:stat"; + gpios = <&gpio2 0 1>; + linux,default-trigger = "cpu0"; + }; + + green_stat_led { + label = "mirabox:green:stat"; + gpios = <&gpio2 1 1>; + default-state = "off"; + }; + }; + + mdio { + phy0: ethernet-phy@0 { + reg = <0>; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + ethernet@70000 { + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; + }; + ethernet@74000 { + status = "okay"; + phy = <&phy1>; + phy-mode = "rgmii-id"; + }; + + mvsdio@d4000 { + pinctrl-0 = <&sdio_pins3>; + pinctrl-names = "default"; + status = "okay"; + /* + * No CD or WP GPIOs: SDIO interface used for + * Wifi/Bluetooth chip + */ + }; + + usb@50000 { + status = "okay"; + }; - usb@d0051000 { - status = "okay"; + usb@51000 { + status = "okay"; + }; + + i2c@11000 { + status = "okay"; + clock-frequency = <100000>; + pca9505: pca9505@25 { + compatible = "nxp,pca9505"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x25>; + }; + }; + + pcie-controller { + status = "okay"; + + /* Internal mini-PCIe connector */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + /* Connected on the PCB to a USB 3.0 XHCI controller */ + pcie@2,0 { + /* Port 1, Lane 0 */ + status = "okay"; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts index 070bba4f2585..130f8390a7e4 100644 --- a/arch/arm/boot/dts/armada-370-rd.dts +++ b/arch/arm/boot/dts/armada-370-rd.dts @@ -28,49 +28,62 @@ }; soc { - serial@d0012000 { - clock-frequency = <200000000>; - status = "okay"; - }; - sata@d00a0000 { - nr-ports = <2>; - status = "okay"; - }; + internal-regs { + serial@12000 { + clock-frequency = <200000000>; + status = "okay"; + }; + sata@a0000 { + nr-ports = <2>; + status = "okay"; + }; - mdio { - phy0: ethernet-phy@0 { - reg = <0>; + mdio { + phy0: ethernet-phy@0 { + reg = <0>; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + }; }; - phy1: ethernet-phy@1 { - reg = <1>; + ethernet@70000 { + status = "okay"; + phy = <&phy0>; + phy-mode = "sgmii"; + }; + ethernet@74000 { + status = "okay"; + phy = <&phy1>; + phy-mode = "rgmii-id"; }; - }; - ethernet@d0070000 { - status = "okay"; - phy = <&phy0>; - phy-mode = "sgmii"; - }; - ethernet@d0074000 { - status = "okay"; - phy = <&phy1>; - phy-mode = "rgmii-id"; - }; + mvsdio@d4000 { + pinctrl-0 = <&sdio_pins1>; + pinctrl-names = "default"; + status = "okay"; + /* No CD or WP GPIOs */ + }; - mvsdio@d00d4000 { - pinctrl-0 = <&sdio_pins1>; - pinctrl-names = "default"; - status = "okay"; - /* No CD or WP GPIOs */ - }; + usb@50000 { + status = "okay"; + }; - usb@d0050000 { - status = "okay"; - }; + usb@51000 { + status = "okay"; + }; - usb@d0051000 { - status = "okay"; + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + button@1 { + label = "Software Button"; + linux,code = <116>; + gpios = <&gpio0 6 1>; + }; + }; }; }; -}; + }; diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index 5b708208b607..272bbc65fab0 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -16,7 +16,7 @@ * 370 and Armada XP SoC. */ -/include/ "skeleton.dtsi" +/include/ "skeleton64.dtsi" / { model = "Marvell Armada 370 and XP SoC"; @@ -28,159 +28,203 @@ }; }; - mpic: interrupt-controller@d0020000 { - compatible = "marvell,mpic"; - #interrupt-cells = <1>; - #size-cells = <1>; - interrupt-controller; - }; - - coherency-fabric@d0020200 { - compatible = "marvell,coherency-fabric"; - reg = <0xd0020200 0xb0>, - <0xd0021810 0x1c>; - }; - soc { #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; interrupt-parent = <&mpic>; - ranges; + ranges = <0 0 0xd0000000 0x100000>; - serial@d0012000 { + internal-regs { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mpic: interrupt-controller@20000 { + compatible = "marvell,mpic"; + #interrupt-cells = <1>; + #size-cells = <1>; + interrupt-controller; + }; + + coherency-fabric@20200 { + compatible = "marvell,coherency-fabric"; + reg = <0x20200 0xb0>, <0x21810 0x1c>; + }; + + serial@12000 { compatible = "snps,dw-apb-uart"; - reg = <0xd0012000 0x100>; + reg = <0x12000 0x100>; reg-shift = <2>; interrupts = <41>; reg-io-width = <1>; status = "disabled"; - }; - serial@d0012100 { + }; + serial@12100 { compatible = "snps,dw-apb-uart"; - reg = <0xd0012100 0x100>; + reg = <0x12100 0x100>; reg-shift = <2>; interrupts = <42>; reg-io-width = <1>; status = "disabled"; - }; - - timer@d0020300 { - compatible = "marvell,armada-370-xp-timer"; - reg = <0xd0020300 0x30>, - <0xd0021040 0x30>; - interrupts = <37>, <38>, <39>, <40>, <5>, <6>; - clocks = <&coreclk 2>; - }; - - addr-decoding@d0020000 { - compatible = "marvell,armada-addr-decoding-controller"; - reg = <0xd0020000 0x258>; - }; - - sata@d00a0000 { - compatible = "marvell,orion-sata"; - reg = <0xd00a0000 0x2400>; - interrupts = <55>; - clocks = <&gateclk 15>, <&gateclk 30>; - clock-names = "0", "1"; - status = "disabled"; - }; + }; + + timer@20300 { + compatible = "marvell,armada-370-xp-timer"; + reg = <0x20300 0x30>, <0x21040 0x30>; + interrupts = <37>, <38>, <39>, <40>, <5>, <6>; + clocks = <&coreclk 2>; + }; + + sata@a0000 { + compatible = "marvell,orion-sata"; + reg = <0xa0000 0x2400>; + interrupts = <55>; + clocks = <&gateclk 15>, <&gateclk 30>; + clock-names = "0", "1"; + status = "disabled"; + }; - mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "marvell,orion-mdio"; - reg = <0xd0072004 0x4>; - }; + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "marvell,orion-mdio"; + reg = <0x72004 0x4>; + }; - ethernet@d0070000 { + ethernet@70000 { compatible = "marvell,armada-370-neta"; - reg = <0xd0070000 0x2500>; + reg = <0x70000 0x2500>; interrupts = <8>; clocks = <&gateclk 4>; status = "disabled"; - }; + }; - ethernet@d0074000 { + ethernet@74000 { compatible = "marvell,armada-370-neta"; - reg = <0xd0074000 0x2500>; + reg = <0x74000 0x2500>; interrupts = <10>; clocks = <&gateclk 3>; status = "disabled"; - }; - - i2c0: i2c@d0011000 { - compatible = "marvell,mv64xxx-i2c"; - reg = <0xd0011000 0x20>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <31>; - timeout-ms = <1000>; - clocks = <&coreclk 0>; - status = "disabled"; - }; - - i2c1: i2c@d0011100 { - compatible = "marvell,mv64xxx-i2c"; - reg = <0xd0011100 0x20>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <32>; - timeout-ms = <1000>; - clocks = <&coreclk 0>; - status = "disabled"; - }; - - rtc@10300 { - compatible = "marvell,orion-rtc"; - reg = <0xd0010300 0x20>; - interrupts = <50>; - }; - - mvsdio@d00d4000 { - compatible = "marvell,orion-sdio"; - reg = <0xd00d4000 0x200>; - interrupts = <54>; - clocks = <&gateclk 17>; - status = "disabled"; - }; - - usb@d0050000 { - compatible = "marvell,orion-ehci"; - reg = <0xd0050000 0x500>; - interrupts = <45>; - status = "disabled"; - }; - - usb@d0051000 { - compatible = "marvell,orion-ehci"; - reg = <0xd0051000 0x500>; - interrupts = <46>; - status = "disabled"; - }; + }; + + i2c0: i2c@11000 { + compatible = "marvell,mv64xxx-i2c"; + reg = <0x11000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <31>; + timeout-ms = <1000>; + clocks = <&coreclk 0>; + status = "disabled"; + }; + + i2c1: i2c@11100 { + compatible = "marvell,mv64xxx-i2c"; + reg = <0x11100 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <32>; + timeout-ms = <1000>; + clocks = <&coreclk 0>; + status = "disabled"; + }; + + rtc@10300 { + compatible = "marvell,orion-rtc"; + reg = <0x10300 0x20>; + interrupts = <50>; + }; + + mvsdio@d4000 { + compatible = "marvell,orion-sdio"; + reg = <0xd4000 0x200>; + interrupts = <54>; + clocks = <&gateclk 17>; + status = "disabled"; + }; - spi0: spi@d0010600 { - compatible = "marvell,orion-spi"; - reg = <0xd0010600 0x28>; - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - interrupts = <30>; - clocks = <&coreclk 0>; - status = "disabled"; - }; + usb@50000 { + compatible = "marvell,orion-ehci"; + reg = <0x50000 0x500>; + interrupts = <45>; + status = "disabled"; + }; - spi1: spi@d0010680 { - compatible = "marvell,orion-spi"; - reg = <0xd0010680 0x28>; - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - interrupts = <92>; - clocks = <&coreclk 0>; - status = "disabled"; + usb@51000 { + compatible = "marvell,orion-ehci"; + reg = <0x51000 0x500>; + interrupts = <46>; + status = "disabled"; + }; + + spi0: spi@10600 { + compatible = "marvell,orion-spi"; + reg = <0x10600 0x28>; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + interrupts = <30>; + clocks = <&coreclk 0>; + status = "disabled"; + }; + + spi1: spi@10680 { + compatible = "marvell,orion-spi"; + reg = <0x10680 0x28>; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + interrupts = <92>; + clocks = <&coreclk 0>; + status = "disabled"; + }; + + devbus-bootcs@10400 { + compatible = "marvell,mvebu-devbus"; + reg = <0x10400 0x8>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&coreclk 0>; + status = "disabled"; + }; + + devbus-cs0@10408 { + compatible = "marvell,mvebu-devbus"; + reg = <0x10408 0x8>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&coreclk 0>; + status = "disabled"; + }; + + devbus-cs1@10410 { + compatible = "marvell,mvebu-devbus"; + reg = <0x10410 0x8>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&coreclk 0>; + status = "disabled"; + }; + + devbus-cs2@10418 { + compatible = "marvell,mvebu-devbus"; + reg = <0x10418 0x8>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&coreclk 0>; + status = "disabled"; + }; + + devbus-cs3@10420 { + compatible = "marvell,mvebu-devbus"; + reg = <0x10420 0x8>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&coreclk 0>; + status = "disabled"; + }; }; }; -}; - + }; diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index a195debb67d3..b2c1b5af9749 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -16,16 +16,11 @@ */ /include/ "armada-370-xp.dtsi" +/include/ "skeleton.dtsi" / { model = "Marvell Armada 370 family SoC"; compatible = "marvell,armada370", "marvell,armada-370-xp"; - L2: l2-cache { - compatible = "marvell,aurora-outer-cache"; - reg = <0xd0008000 0x1000>; - cache-id-part = <0x100>; - wt-override; - }; aliases { gpio0 = &gpio0; @@ -33,131 +28,198 @@ gpio2 = &gpio2; }; - mpic: interrupt-controller@d0020000 { - reg = <0xd0020a00 0x1d0>, - <0xd0021870 0x58>; - }; - soc { - system-controller@d0018200 { + ranges = <0 0xd0000000 0x100000>; + internal-regs { + system-controller@18200 { compatible = "marvell,armada-370-xp-system-controller"; - reg = <0xd0018200 0x100>; - }; - - pinctrl { - compatible = "marvell,mv88f6710-pinctrl"; - reg = <0xd0018000 0x38>; - - sdio_pins1: sdio-pins1 { - marvell,pins = "mpp9", "mpp11", "mpp12", - "mpp13", "mpp14", "mpp15"; - marvell,function = "sd0"; + reg = <0x18200 0x100>; }; - sdio_pins2: sdio-pins2 { - marvell,pins = "mpp47", "mpp48", "mpp49", - "mpp50", "mpp51", "mpp52"; - marvell,function = "sd0"; + L2: l2-cache { + compatible = "marvell,aurora-outer-cache"; + reg = <0xd0008000 0x1000>; + cache-id-part = <0x100>; + wt-override; }; - sdio_pins3: sdio-pins3 { - marvell,pins = "mpp48", "mpp49", "mpp50", - "mpp51", "mpp52", "mpp53"; - marvell,function = "sd0"; + mpic: interrupt-controller@20000 { + reg = <0x20a00 0x1d0>, <0x21870 0x58>; }; - }; - - gpio0: gpio@d0018100 { - compatible = "marvell,orion-gpio"; - reg = <0xd0018100 0x40>; - ngpios = <32>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupts-cells = <2>; - interrupts = <82>, <83>, <84>, <85>; - }; - gpio1: gpio@d0018140 { - compatible = "marvell,orion-gpio"; - reg = <0xd0018140 0x40>; - ngpios = <32>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupts-cells = <2>; - interrupts = <87>, <88>, <89>, <90>; - }; + pinctrl { + compatible = "marvell,mv88f6710-pinctrl"; + reg = <0x18000 0x38>; + + sdio_pins1: sdio-pins1 { + marvell,pins = "mpp9", "mpp11", "mpp12", + "mpp13", "mpp14", "mpp15"; + marvell,function = "sd0"; + }; + + sdio_pins2: sdio-pins2 { + marvell,pins = "mpp47", "mpp48", "mpp49", + "mpp50", "mpp51", "mpp52"; + marvell,function = "sd0"; + }; + + sdio_pins3: sdio-pins3 { + marvell,pins = "mpp48", "mpp49", "mpp50", + "mpp51", "mpp52", "mpp53"; + marvell,function = "sd0"; + }; + }; - gpio2: gpio@d0018180 { - compatible = "marvell,orion-gpio"; - reg = <0xd0018180 0x40>; - ngpios = <2>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupts-cells = <2>; - interrupts = <91>; - }; + gpio0: gpio@18100 { + compatible = "marvell,orion-gpio"; + reg = <0x18100 0x40>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <82>, <83>, <84>, <85>; + }; - coreclk: mvebu-sar@d0018230 { - compatible = "marvell,armada-370-core-clock"; - reg = <0xd0018230 0x08>; - #clock-cells = <1>; - }; + gpio1: gpio@18140 { + compatible = "marvell,orion-gpio"; + reg = <0x18140 0x40>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <87>, <88>, <89>, <90>; + }; - gateclk: clock-gating-control@d0018220 { - compatible = "marvell,armada-370-gating-clock"; - reg = <0xd0018220 0x4>; - clocks = <&coreclk 0>; - #clock-cells = <1>; - }; + gpio2: gpio@18180 { + compatible = "marvell,orion-gpio"; + reg = <0x18180 0x40>; + ngpios = <2>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <91>; + }; - xor@d0060800 { - compatible = "marvell,orion-xor"; - reg = <0xd0060800 0x100 - 0xd0060A00 0x100>; - status = "okay"; + coreclk: mvebu-sar@18230 { + compatible = "marvell,armada-370-core-clock"; + reg = <0x18230 0x08>; + #clock-cells = <1>; + }; - xor00 { - interrupts = <51>; - dmacap,memcpy; - dmacap,xor; + gateclk: clock-gating-control@18220 { + compatible = "marvell,armada-370-gating-clock"; + reg = <0x18220 0x4>; + clocks = <&coreclk 0>; + #clock-cells = <1>; }; - xor01 { - interrupts = <52>; - dmacap,memcpy; - dmacap,xor; - dmacap,memset; + + xor@60800 { + compatible = "marvell,orion-xor"; + reg = <0x60800 0x100 + 0x60A00 0x100>; + status = "okay"; + + xor00 { + interrupts = <51>; + dmacap,memcpy; + dmacap,xor; + }; + xor01 { + interrupts = <52>; + dmacap,memcpy; + dmacap,xor; + dmacap,memset; + }; }; - }; - xor@d0060900 { - compatible = "marvell,orion-xor"; - reg = <0xd0060900 0x100 - 0xd0060b00 0x100>; - status = "okay"; + xor@60900 { + compatible = "marvell,orion-xor"; + reg = <0x60900 0x100 + 0x60b00 0x100>; + status = "okay"; + + xor10 { + interrupts = <94>; + dmacap,memcpy; + dmacap,xor; + }; + xor11 { + interrupts = <95>; + dmacap,memcpy; + dmacap,xor; + dmacap,memset; + }; + }; - xor10 { - interrupts = <94>; - dmacap,memcpy; - dmacap,xor; + usb@50000 { + clocks = <&coreclk 0>; }; - xor11 { - interrupts = <95>; - dmacap,memcpy; - dmacap,xor; - dmacap,memset; + + usb@51000 { + clocks = <&coreclk 0>; }; - }; - usb@d0050000 { - clocks = <&coreclk 0>; - }; + thermal@18300 { + compatible = "marvell,armada370-thermal"; + reg = <0x18300 0x4 + 0x18304 0x4>; + status = "okay"; + }; - usb@d0051000 { - clocks = <&coreclk 0>; + pcie-controller { + compatible = "marvell,armada-370-pcie"; + status = "disabled"; + device_type = "pci"; + + #address-cells = <3>; + #size-cells = <2>; + + bus-range = <0x00 0xff>; + + reg = <0x40000 0x2000>, <0x80000 0x2000>; + + reg-names = "pcie0.0", "pcie1.0"; + + ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */ + 0x82000000 0 0x80000 0x80000 0 0x00002000 /* Port 1.0 registers */ + 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ + 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ + + pcie@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 58>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 5>; + status = "disabled"; + }; + + pcie@2,0 { + device_type = "pci"; + assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; + reg = <0x1000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 62>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 9>; + status = "disabled"; + }; + }; }; - }; }; diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts index e83505e4c236..d6cc8bf8272e 100644 --- a/arch/arm/boot/dts/armada-xp-db.dts +++ b/arch/arm/boot/dts/armada-xp-db.dts @@ -26,99 +26,134 @@ memory { device_type = "memory"; - reg = <0x00000000 0x80000000>; /* 2 GB */ + reg = <0 0x00000000 0 0x80000000>; /* 2 GB */ }; soc { - serial@d0012000 { - clock-frequency = <250000000>; - status = "okay"; - }; - serial@d0012100 { - clock-frequency = <250000000>; - status = "okay"; - }; - serial@d0012200 { - clock-frequency = <250000000>; - status = "okay"; - }; - serial@d0012300 { - clock-frequency = <250000000>; - status = "okay"; - }; - - sata@d00a0000 { - nr-ports = <2>; - status = "okay"; - }; - - mdio { - phy0: ethernet-phy@0 { - reg = <0>; + internal-regs { + serial@12000 { + clock-frequency = <250000000>; + status = "okay"; + }; + serial@12100 { + clock-frequency = <250000000>; + status = "okay"; + }; + serial@12200 { + clock-frequency = <250000000>; + status = "okay"; + }; + serial@12300 { + clock-frequency = <250000000>; + status = "okay"; }; - phy1: ethernet-phy@1 { - reg = <1>; + sata@a0000 { + nr-ports = <2>; + status = "okay"; }; - phy2: ethernet-phy@2 { - reg = <25>; + mdio { + phy0: ethernet-phy@0 { + reg = <0>; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + + phy2: ethernet-phy@2 { + reg = <25>; + }; + + phy3: ethernet-phy@3 { + reg = <27>; + }; }; - phy3: ethernet-phy@3 { - reg = <27>; + ethernet@70000 { + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; + }; + ethernet@74000 { + status = "okay"; + phy = <&phy1>; + phy-mode = "rgmii-id"; + }; + ethernet@30000 { + status = "okay"; + phy = <&phy2>; + phy-mode = "sgmii"; + }; + ethernet@34000 { + status = "okay"; + phy = <&phy3>; + phy-mode = "sgmii"; }; - }; - ethernet@d0070000 { - status = "okay"; - phy = <&phy0>; - phy-mode = "rgmii-id"; - }; - ethernet@d0074000 { - status = "okay"; - phy = <&phy1>; - phy-mode = "rgmii-id"; - }; - ethernet@d0030000 { - status = "okay"; - phy = <&phy2>; - phy-mode = "sgmii"; - }; - ethernet@d0034000 { - status = "okay"; - phy = <&phy3>; - phy-mode = "sgmii"; - }; + mvsdio@d4000 { + pinctrl-0 = <&sdio_pins>; + pinctrl-names = "default"; + status = "okay"; + /* No CD or WP GPIOs */ + }; - mvsdio@d00d4000 { - pinctrl-0 = <&sdio_pins>; - pinctrl-names = "default"; - status = "okay"; - /* No CD or WP GPIOs */ - }; + usb@50000 { + status = "okay"; + }; - usb@d0050000 { - status = "okay"; - }; + usb@51000 { + status = "okay"; + }; - usb@d0051000 { - status = "okay"; - }; + usb@52000 { + status = "okay"; + }; - usb@d0052000 { - status = "okay"; - }; + spi0: spi@10600 { + status = "okay"; - spi0: spi@d0010600 { - status = "okay"; + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p64"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <20000000>; + }; + }; - spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "m25p64"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <20000000>; + pcie-controller { + status = "okay"; + + /* + * All 6 slots are physically present as + * standard PCIe slots on the board. + */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + pcie@2,0 { + /* Port 0, Lane 1 */ + status = "okay"; + }; + pcie@3,0 { + /* Port 0, Lane 2 */ + status = "okay"; + }; + pcie@4,0 { + /* Port 0, Lane 3 */ + status = "okay"; + }; + pcie@9,0 { + /* Port 2, Lane 0 */ + status = "okay"; + }; + pcie@10,0 { + /* Port 3, Lane 0 */ + status = "okay"; + }; }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts index 1c8afe2ffebc..26ad06fc147e 100644 --- a/arch/arm/boot/dts/armada-xp-gp.dts +++ b/arch/arm/boot/dts/armada-xp-gp.dts @@ -26,87 +26,141 @@ memory { device_type = "memory"; - /* - * 4 GB of plug-in RAM modules by default but only 3GB - * are visible, the amount of memory available can be - * changed by the bootloader according the size of the - * module actually plugged + * 8 GB of plug-in RAM modules by default.The amount + * of memory available can be changed by the + * bootloader according the size of the module + * actually plugged. Only 7GB are usable because + * addresses from 0xC0000000 to 0xffffffff are used by + * the internal registers of the SoC. */ - reg = <0x00000000 0xC0000000>; + reg = <0x00000000 0x00000000 0x00000000 0xC0000000>, + <0x00000001 0x00000000 0x00000001 0x00000000>; }; soc { - serial@d0012000 { - clock-frequency = <250000000>; - status = "okay"; - }; - serial@d0012100 { - clock-frequency = <250000000>; - status = "okay"; - }; - serial@d0012200 { - clock-frequency = <250000000>; - status = "okay"; - }; - serial@d0012300 { - clock-frequency = <250000000>; - status = "okay"; - }; - - sata@d00a0000 { - nr-ports = <2>; - status = "okay"; - }; + internal-regs { + serial@12000 { + clock-frequency = <250000000>; + status = "okay"; + }; + serial@12100 { + clock-frequency = <250000000>; + status = "okay"; + }; + serial@12200 { + clock-frequency = <250000000>; + status = "okay"; + }; + serial@12300 { + clock-frequency = <250000000>; + status = "okay"; + }; - mdio { - phy0: ethernet-phy@0 { - reg = <16>; + sata@a0000 { + nr-ports = <2>; + status = "okay"; }; - phy1: ethernet-phy@1 { - reg = <17>; + mdio { + phy0: ethernet-phy@0 { + reg = <16>; + }; + + phy1: ethernet-phy@1 { + reg = <17>; + }; + + phy2: ethernet-phy@2 { + reg = <18>; + }; + + phy3: ethernet-phy@3 { + reg = <19>; + }; }; - phy2: ethernet-phy@2 { - reg = <18>; + ethernet@70000 { + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; }; + ethernet@74000 { + status = "okay"; + phy = <&phy1>; + phy-mode = "rgmii-id"; + }; + ethernet@30000 { + status = "okay"; + phy = <&phy2>; + phy-mode = "rgmii-id"; + }; + ethernet@34000 { + status = "okay"; + phy = <&phy3>; + phy-mode = "rgmii-id"; + }; + + spi0: spi@10600 { + status = "okay"; - phy3: ethernet-phy@3 { - reg = <19>; + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "n25q128a13"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <108000000>; + }; }; - }; - ethernet@d0070000 { - status = "okay"; - phy = <&phy0>; - phy-mode = "rgmii-id"; - }; - ethernet@d0074000 { - status = "okay"; - phy = <&phy1>; - phy-mode = "rgmii-id"; - }; - ethernet@d0030000 { - status = "okay"; - phy = <&phy2>; - phy-mode = "rgmii-id"; - }; - ethernet@d0034000 { - status = "okay"; - phy = <&phy3>; - phy-mode = "rgmii-id"; - }; + devbus-bootcs@10400 { + status = "okay"; + ranges = <0 0xf0000000 0x1000000>; /* @addr 0xf000000, size 0x1000000 */ + + /* Device Bus parameters are required */ + + /* Read parameters */ + devbus,bus-width = <8>; + devbus,turn-off-ps = <60000>; + devbus,badr-skew-ps = <0>; + devbus,acc-first-ps = <124000>; + devbus,acc-next-ps = <248000>; + devbus,rd-setup-ps = <0>; + devbus,rd-hold-ps = <0>; + + /* Write parameters */ + devbus,sync-enable = <0>; + devbus,wr-high-ps = <60000>; + devbus,wr-low-ps = <60000>; + devbus,ale-wr-ps = <60000>; + + /* NOR 16 MiB */ + nor@0 { + compatible = "cfi-flash"; + reg = <0 0x1000000>; + bank-width = <2>; + }; + }; - spi0: spi@d0010600 { - status = "okay"; + pcie-controller { + status = "okay"; - spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "n25q128a13"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <108000000>; + /* + * The 3 slots are physically present as + * standard PCIe slots on the board. + */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + pcie@9,0 { + /* Port 2, Lane 0 */ + status = "okay"; + }; + pcie@10,0 { + /* Port 3, Lane 0 */ + status = "okay"; + }; }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi index f56c40599f5b..f8eaa383e07f 100644 --- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi @@ -25,56 +25,162 @@ }; cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - compatible = "marvell,sheeva-v7"; - reg = <0>; - clocks = <&cpuclk 0>; - }; - - cpu@1 { - device_type = "cpu"; - compatible = "marvell,sheeva-v7"; - reg = <1>; - clocks = <&cpuclk 1>; - }; + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "marvell,sheeva-v7"; + reg = <0>; + clocks = <&cpuclk 0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "marvell,sheeva-v7"; + reg = <1>; + clocks = <&cpuclk 1>; + }; }; soc { - pinctrl { - compatible = "marvell,mv78230-pinctrl"; - reg = <0xd0018000 0x38>; - - sdio_pins: sdio-pins { - marvell,pins = "mpp30", "mpp31", "mpp32", - "mpp33", "mpp34", "mpp35"; - marvell,function = "sd0"; + internal-regs { + pinctrl { + compatible = "marvell,mv78230-pinctrl"; + reg = <0x18000 0x38>; + + sdio_pins: sdio-pins { + marvell,pins = "mpp30", "mpp31", "mpp32", + "mpp33", "mpp34", "mpp35"; + marvell,function = "sd0"; + }; }; - }; - gpio0: gpio@d0018100 { - compatible = "marvell,orion-gpio"; - reg = <0xd0018100 0x40>; - ngpios = <32>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupts-cells = <2>; - interrupts = <82>, <83>, <84>, <85>; - }; + gpio0: gpio@18100 { + compatible = "marvell,orion-gpio"; + reg = <0x18100 0x40>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <82>, <83>, <84>, <85>; + }; + + gpio1: gpio@18140 { + compatible = "marvell,orion-gpio"; + reg = <0x18140 0x40>; + ngpios = <17>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <87>, <88>, <89>; + }; - gpio1: gpio@d0018140 { - compatible = "marvell,orion-gpio"; - reg = <0xd0018140 0x40>; - ngpios = <17>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupts-cells = <2>; - interrupts = <87>, <88>, <89>; + /* + * MV78230 has 2 PCIe units Gen2.0: One unit can be + * configured as x4 or quad x1 lanes. One unit is + * x4/x1. + */ + pcie-controller { + compatible = "marvell,armada-xp-pcie"; + status = "disabled"; + device_type = "pci"; + +#address-cells = <3>; +#size-cells = <2>; + + bus-range = <0x00 0xff>; + + ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */ + 0x82000000 0 0x42000 0x42000 0 0x00002000 /* Port 2.0 registers */ + 0x82000000 0 0x44000 0x44000 0 0x00002000 /* Port 0.1 registers */ + 0x82000000 0 0x48000 0x48000 0 0x00002000 /* Port 0.2 registers */ + 0x82000000 0 0x4c000 0x4c000 0 0x00002000 /* Port 0.3 registers */ + 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ + 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ + + pcie@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 58>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 5>; + status = "disabled"; + }; + + pcie@2,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; + reg = <0x1000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 59>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <1>; + clocks = <&gateclk 6>; + status = "disabled"; + }; + + pcie@3,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; + reg = <0x1800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 60>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <2>; + clocks = <&gateclk 7>; + status = "disabled"; + }; + + pcie@4,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>; + reg = <0x2000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 61>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <3>; + clocks = <&gateclk 8>; + status = "disabled"; + }; + + pcie@9,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x42000 0 0x2000>; + reg = <0x4800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 99>; + marvell,pcie-port = <2>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 26>; + status = "disabled"; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index f8f2b787d2b0..f4029f015aff 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -26,75 +26,199 @@ }; cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - compatible = "marvell,sheeva-v7"; - reg = <0>; - clocks = <&cpuclk 0>; - }; - - cpu@1 { - device_type = "cpu"; - compatible = "marvell,sheeva-v7"; - reg = <1>; - clocks = <&cpuclk 1>; - }; + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "marvell,sheeva-v7"; + reg = <0>; + clocks = <&cpuclk 0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "marvell,sheeva-v7"; + reg = <1>; + clocks = <&cpuclk 1>; + }; }; soc { - pinctrl { - compatible = "marvell,mv78260-pinctrl"; - reg = <0xd0018000 0x38>; - - sdio_pins: sdio-pins { - marvell,pins = "mpp30", "mpp31", "mpp32", - "mpp33", "mpp34", "mpp35"; - marvell,function = "sd0"; + internal-regs { + pinctrl { + compatible = "marvell,mv78260-pinctrl"; + reg = <0x18000 0x38>; + + sdio_pins: sdio-pins { + marvell,pins = "mpp30", "mpp31", "mpp32", + "mpp33", "mpp34", "mpp35"; + marvell,function = "sd0"; + }; }; - }; - gpio0: gpio@d0018100 { - compatible = "marvell,orion-gpio"; - reg = <0xd0018100 0x40>; - ngpios = <32>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupts-cells = <2>; - interrupts = <82>, <83>, <84>, <85>; - }; + gpio0: gpio@18100 { + compatible = "marvell,orion-gpio"; + reg = <0x18100 0x40>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <82>, <83>, <84>, <85>; + }; - gpio1: gpio@d0018140 { - compatible = "marvell,orion-gpio"; - reg = <0xd0018140 0x40>; - ngpios = <32>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupts-cells = <2>; - interrupts = <87>, <88>, <89>, <90>; - }; + gpio1: gpio@18140 { + compatible = "marvell,orion-gpio"; + reg = <0x18140 0x40>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <87>, <88>, <89>, <90>; + }; - gpio2: gpio@d0018180 { - compatible = "marvell,orion-gpio"; - reg = <0xd0018180 0x40>; - ngpios = <3>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupts-cells = <2>; - interrupts = <91>; - }; + gpio2: gpio@18180 { + compatible = "marvell,orion-gpio"; + reg = <0x18180 0x40>; + ngpios = <3>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <91>; + }; - ethernet@d0034000 { + ethernet@34000 { compatible = "marvell,armada-370-neta"; - reg = <0xd0034000 0x2500>; + reg = <0x34000 0x2500>; interrupts = <14>; clocks = <&gateclk 1>; status = "disabled"; + }; + + /* + * MV78260 has 3 PCIe units Gen2.0: Two units can be + * configured as x4 or quad x1 lanes. One unit is + * x4/x1. + */ + pcie-controller { + compatible = "marvell,armada-xp-pcie"; + status = "disabled"; + device_type = "pci"; + + #address-cells = <3>; + #size-cells = <2>; + + bus-range = <0x00 0xff>; + + ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */ + 0x82000000 0 0x42000 0x42000 0 0x00002000 /* Port 2.0 registers */ + 0x82000000 0 0x44000 0x44000 0 0x00002000 /* Port 0.1 registers */ + 0x82000000 0 0x48000 0x48000 0 0x00002000 /* Port 0.2 registers */ + 0x82000000 0 0x4c000 0x4c000 0 0x00002000 /* Port 0.3 registers */ + 0x82000000 0 0x80000 0x80000 0 0x00002000 /* Port 1.0 registers */ + 0x82000000 0 0x82000 0x82000 0 0x00002000 /* Port 3.0 registers */ + 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ + 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ + + pcie@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 58>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 5>; + status = "disabled"; + }; + + pcie@2,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; + reg = <0x1000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 59>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <1>; + clocks = <&gateclk 6>; + status = "disabled"; + }; + + pcie@3,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; + reg = <0x1800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 60>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <2>; + clocks = <&gateclk 7>; + status = "disabled"; + }; + + pcie@4,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>; + reg = <0x2000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 61>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <3>; + clocks = <&gateclk 8>; + status = "disabled"; + }; + + pcie@9,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x42000 0 0x2000>; + reg = <0x4800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 99>; + marvell,pcie-port = <2>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 26>; + status = "disabled"; + }; + + pcie@10,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x82000 0 0x2000>; + reg = <0x5000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 103>; + marvell,pcie-port = <3>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 27>; + status = "disabled"; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi index 936c25dc32b0..6ab56bd35de9 100644 --- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi @@ -27,89 +27,279 @@ cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - compatible = "marvell,sheeva-v7"; - reg = <0>; - clocks = <&cpuclk 0>; - }; - - cpu@1 { - device_type = "cpu"; - compatible = "marvell,sheeva-v7"; - reg = <1>; - clocks = <&cpuclk 1>; - }; - - cpu@2 { - device_type = "cpu"; - compatible = "marvell,sheeva-v7"; - reg = <2>; - clocks = <&cpuclk 2>; - }; - - cpu@3 { - device_type = "cpu"; - compatible = "marvell,sheeva-v7"; - reg = <3>; - clocks = <&cpuclk 3>; - }; - }; + #address-cells = <1>; + #size-cells = <0>; - soc { - pinctrl { - compatible = "marvell,mv78460-pinctrl"; - reg = <0xd0018000 0x38>; - - sdio_pins: sdio-pins { - marvell,pins = "mpp30", "mpp31", "mpp32", - "mpp33", "mpp34", "mpp35"; - marvell,function = "sd0"; - }; + cpu@0 { + device_type = "cpu"; + compatible = "marvell,sheeva-v7"; + reg = <0>; + clocks = <&cpuclk 0>; }; - gpio0: gpio@d0018100 { - compatible = "marvell,orion-gpio"; - reg = <0xd0018100 0x40>; - ngpios = <32>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupts-cells = <2>; - interrupts = <82>, <83>, <84>, <85>; + cpu@1 { + device_type = "cpu"; + compatible = "marvell,sheeva-v7"; + reg = <1>; + clocks = <&cpuclk 1>; }; - gpio1: gpio@d0018140 { - compatible = "marvell,orion-gpio"; - reg = <0xd0018140 0x40>; - ngpios = <32>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupts-cells = <2>; - interrupts = <87>, <88>, <89>, <90>; + cpu@2 { + device_type = "cpu"; + compatible = "marvell,sheeva-v7"; + reg = <2>; + clocks = <&cpuclk 2>; }; - gpio2: gpio@d0018180 { - compatible = "marvell,orion-gpio"; - reg = <0xd0018180 0x40>; - ngpios = <3>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupts-cells = <2>; - interrupts = <91>; + cpu@3 { + device_type = "cpu"; + compatible = "marvell,sheeva-v7"; + reg = <3>; + clocks = <&cpuclk 3>; }; + }; + + soc { + internal-regs { + pinctrl { + compatible = "marvell,mv78460-pinctrl"; + reg = <0x18000 0x38>; + + sdio_pins: sdio-pins { + marvell,pins = "mpp30", "mpp31", "mpp32", + "mpp33", "mpp34", "mpp35"; + marvell,function = "sd0"; + }; + }; - ethernet@d0034000 { + gpio0: gpio@18100 { + compatible = "marvell,orion-gpio"; + reg = <0x18100 0x40>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <82>, <83>, <84>, <85>; + }; + + gpio1: gpio@18140 { + compatible = "marvell,orion-gpio"; + reg = <0x18140 0x40>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <87>, <88>, <89>, <90>; + }; + + gpio2: gpio@18180 { + compatible = "marvell,orion-gpio"; + reg = <0x18180 0x40>; + ngpios = <3>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <91>; + }; + + ethernet@34000 { compatible = "marvell,armada-370-neta"; - reg = <0xd0034000 0x2500>; + reg = <0x34000 0x2500>; interrupts = <14>; clocks = <&gateclk 1>; status = "disabled"; + }; + + /* + * MV78460 has 4 PCIe units Gen2.0: Two units can be + * configured as x4 or quad x1 lanes. Two units are + * x4/x1. + */ + pcie-controller { + compatible = "marvell,armada-xp-pcie"; + status = "disabled"; + device_type = "pci"; + + #address-cells = <3>; + #size-cells = <2>; + + bus-range = <0x00 0xff>; + + ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */ + 0x82000000 0 0x42000 0x42000 0 0x00002000 /* Port 2.0 registers */ + 0x82000000 0 0x44000 0x44000 0 0x00002000 /* Port 0.1 registers */ + 0x82000000 0 0x48000 0x48000 0 0x00002000 /* Port 0.2 registers */ + 0x82000000 0 0x4c000 0x4c000 0 0x00002000 /* Port 0.3 registers */ + 0x82000000 0 0x80000 0x80000 0 0x00002000 /* Port 1.0 registers */ + 0x82000000 0 0x82000 0x82000 0 0x00002000 /* Port 3.0 registers */ + 0x82000000 0 0x84000 0x84000 0 0x00002000 /* Port 1.1 registers */ + 0x82000000 0 0x88000 0x88000 0 0x00002000 /* Port 1.2 registers */ + 0x82000000 0 0x8c000 0x8c000 0 0x00002000 /* Port 1.3 registers */ + 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ + 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ + + pcie@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 58>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 5>; + status = "disabled"; + }; + + pcie@2,0 { + device_type = "pci"; + assigned-addresses = <0x82001000 0 0x44000 0 0x2000>; + reg = <0x1000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 59>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <1>; + clocks = <&gateclk 6>; + status = "disabled"; + }; + + pcie@3,0 { + device_type = "pci"; + assigned-addresses = <0x82001800 0 0x48000 0 0x2000>; + reg = <0x1800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 60>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <2>; + clocks = <&gateclk 7>; + status = "disabled"; + }; + + pcie@4,0 { + device_type = "pci"; + assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>; + reg = <0x2000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 61>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <3>; + clocks = <&gateclk 8>; + status = "disabled"; + }; + + pcie@5,0 { + device_type = "pci"; + assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; + reg = <0x2800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 62>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 9>; + status = "disabled"; + }; + + pcie@6,0 { + device_type = "pci"; + assigned-addresses = <0x82003000 0 0x84000 0 0x2000>; + reg = <0x3000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 63>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <1>; + clocks = <&gateclk 10>; + status = "disabled"; + }; + + pcie@7,0 { + device_type = "pci"; + assigned-addresses = <0x82003800 0 0x88000 0 0x2000>; + reg = <0x3800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 64>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <2>; + clocks = <&gateclk 11>; + status = "disabled"; + }; + + pcie@8,0 { + device_type = "pci"; + assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>; + reg = <0x4000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 65>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <3>; + clocks = <&gateclk 12>; + status = "disabled"; + }; + pcie@9,0 { + device_type = "pci"; + assigned-addresses = <0x82004800 0 0x42000 0 0x2000>; + reg = <0x4800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 99>; + marvell,pcie-port = <2>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 26>; + status = "disabled"; + }; + + pcie@10,0 { + device_type = "pci"; + assigned-addresses = <0x82005000 0 0x82000 0 0x2000>; + reg = <0x5000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 103>; + marvell,pcie-port = <3>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 27>; + status = "disabled"; + }; + }; }; }; - }; +}; diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts index 3818a82176a2..f14d36c46159 100644 --- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts +++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts @@ -23,121 +23,161 @@ memory { device_type = "memory"; - reg = <0x00000000 0xC0000000>; /* 3 GB */ + reg = <0 0x00000000 0 0xC0000000>; /* 3 GB */ }; soc { - serial@d0012000 { - clock-frequency = <250000000>; - status = "okay"; - }; - serial@d0012100 { - clock-frequency = <250000000>; - status = "okay"; - }; - pinctrl { - led_pins: led-pins-0 { - marvell,pins = "mpp49", "mpp51", "mpp53"; - marvell,function = "gpio"; + internal-regs { + serial@12000 { + clock-frequency = <250000000>; + status = "okay"; }; - }; - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins>; - - red_led { - label = "red_led"; - gpios = <&gpio1 17 1>; - default-state = "off"; + serial@12100 { + clock-frequency = <250000000>; + status = "okay"; }; - - yellow_led { - label = "yellow_led"; - gpios = <&gpio1 19 1>; - default-state = "off"; + pinctrl { + led_pins: led-pins-0 { + marvell,pins = "mpp49", "mpp51", "mpp53"; + marvell,function = "gpio"; + }; }; - - green_led { - label = "green_led"; - gpios = <&gpio1 21 1>; - default-state = "off"; - linux,default-trigger = "heartbeat"; + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins>; + + red_led { + label = "red_led"; + gpios = <&gpio1 17 1>; + default-state = "off"; + }; + + yellow_led { + label = "yellow_led"; + gpios = <&gpio1 19 1>; + default-state = "off"; + }; + + green_led { + label = "green_led"; + gpios = <&gpio1 21 1>; + default-state = "off"; + linux,default-trigger = "heartbeat"; + }; }; - }; - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; - button@1 { - label = "Init Button"; - linux,code = <116>; - gpios = <&gpio1 28 0>; + button@1 { + label = "Init Button"; + linux,code = <116>; + gpios = <&gpio1 28 0>; + }; }; - }; - mdio { - phy0: ethernet-phy@0 { - reg = <0>; - }; + mdio { + phy0: ethernet-phy@0 { + reg = <0>; + }; - phy1: ethernet-phy@1 { - reg = <1>; - }; + phy1: ethernet-phy@1 { + reg = <1>; + }; - phy2: ethernet-phy@2 { - reg = <2>; + phy2: ethernet-phy@2 { + reg = <2>; + }; + + phy3: ethernet-phy@3 { + reg = <3>; + }; }; - phy3: ethernet-phy@3 { - reg = <3>; + ethernet@70000 { + status = "okay"; + phy = <&phy0>; + phy-mode = "sgmii"; + }; + ethernet@74000 { + status = "okay"; + phy = <&phy1>; + phy-mode = "sgmii"; + }; + ethernet@30000 { + status = "okay"; + phy = <&phy2>; + phy-mode = "sgmii"; + }; + ethernet@34000 { + status = "okay"; + phy = <&phy3>; + phy-mode = "sgmii"; + }; + i2c@11000 { + status = "okay"; + clock-frequency = <400000>; + }; + i2c@11100 { + status = "okay"; + clock-frequency = <400000>; + + s35390a: s35390a@30 { + compatible = "s35390a"; + reg = <0x30>; + }; + }; + sata@a0000 { + nr-ports = <2>; + status = "okay"; + }; + usb@50000 { + status = "okay"; + }; + usb@51000 { + status = "okay"; }; - }; - ethernet@d0070000 { - status = "okay"; - phy = <&phy0>; - phy-mode = "sgmii"; - }; - ethernet@d0074000 { - status = "okay"; - phy = <&phy1>; - phy-mode = "sgmii"; - }; - ethernet@d0030000 { - status = "okay"; - phy = <&phy2>; - phy-mode = "sgmii"; - }; - ethernet@d0034000 { - status = "okay"; - phy = <&phy3>; - phy-mode = "sgmii"; - }; - i2c@d0011000 { - status = "okay"; - clock-frequency = <400000>; - }; - i2c@d0011100 { - status = "okay"; - clock-frequency = <400000>; + devbus-bootcs@10400 { + status = "okay"; + ranges = <0 0xf0000000 0x8000000>; /* @addr 0xf000000, size 0x8000000 */ + + /* Device Bus parameters are required */ + + /* Read parameters */ + devbus,bus-width = <8>; + devbus,turn-off-ps = <60000>; + devbus,badr-skew-ps = <0>; + devbus,acc-first-ps = <124000>; + devbus,acc-next-ps = <248000>; + devbus,rd-setup-ps = <0>; + devbus,rd-hold-ps = <0>; + + /* Write parameters */ + devbus,sync-enable = <0>; + devbus,wr-high-ps = <60000>; + devbus,wr-low-ps = <60000>; + devbus,ale-wr-ps = <60000>; + + /* NOR 128 MiB */ + nor@0 { + compatible = "cfi-flash"; + reg = <0 0x8000000>; + bank-width = <2>; + }; + }; - s35390a: s35390a@30 { - compatible = "s35390a"; - reg = <0x30>; + pcie-controller { + status = "okay"; + /* Internal mini-PCIe connector */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; }; }; - sata@d00a0000 { - nr-ports = <2>; - status = "okay"; - }; - usb@d0050000 { - status = "okay"; - }; - usb@d0051000 { - status = "okay"; - }; }; }; diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index ca00d8326c87..bacab11c10dc 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -22,134 +22,140 @@ model = "Marvell Armada XP family SoC"; compatible = "marvell,armadaxp", "marvell,armada-370-xp"; - L2: l2-cache { - compatible = "marvell,aurora-system-cache"; - reg = <0xd0008000 0x1000>; - cache-id-part = <0x100>; - wt-override; - }; + soc { + internal-regs { + L2: l2-cache { + compatible = "marvell,aurora-system-cache"; + reg = <0x08000 0x1000>; + cache-id-part = <0x100>; + wt-override; + }; - mpic: interrupt-controller@d0020000 { - reg = <0xd0020a00 0x2d0>, - <0xd0021070 0x58>; - }; + mpic: interrupt-controller@20000 { + reg = <0x20a00 0x2d0>, <0x21070 0x58>; + }; - armada-370-xp-pmsu@d0022000 { - compatible = "marvell,armada-370-xp-pmsu"; - reg = <0xd0022100 0x430>, - <0xd0020800 0x20>; - }; + armada-370-xp-pmsu@22000 { + compatible = "marvell,armada-370-xp-pmsu"; + reg = <0x22100 0x430>, <0x20800 0x20>; + }; - soc { - serial@d0012200 { + serial@12200 { compatible = "snps,dw-apb-uart"; - reg = <0xd0012200 0x100>; + reg = <0x12200 0x100>; reg-shift = <2>; interrupts = <43>; reg-io-width = <1>; status = "disabled"; - }; - serial@d0012300 { + }; + serial@12300 { compatible = "snps,dw-apb-uart"; - reg = <0xd0012300 0x100>; + reg = <0x12300 0x100>; reg-shift = <2>; interrupts = <44>; reg-io-width = <1>; status = "disabled"; - }; + }; - timer@d0020300 { + timer@20300 { marvell,timer-25Mhz; - }; + }; - coreclk: mvebu-sar@d0018230 { - compatible = "marvell,armada-xp-core-clock"; - reg = <0xd0018230 0x08>; - #clock-cells = <1>; - }; + coreclk: mvebu-sar@18230 { + compatible = "marvell,armada-xp-core-clock"; + reg = <0x18230 0x08>; + #clock-cells = <1>; + }; - cpuclk: clock-complex@d0018700 { - #clock-cells = <1>; - compatible = "marvell,armada-xp-cpu-clock"; - reg = <0xd0018700 0xA0>; - clocks = <&coreclk 1>; - }; + cpuclk: clock-complex@18700 { + #clock-cells = <1>; + compatible = "marvell,armada-xp-cpu-clock"; + reg = <0x18700 0xA0>; + clocks = <&coreclk 1>; + }; - gateclk: clock-gating-control@d0018220 { - compatible = "marvell,armada-xp-gating-clock"; - reg = <0xd0018220 0x4>; - clocks = <&coreclk 0>; - #clock-cells = <1>; - }; + gateclk: clock-gating-control@18220 { + compatible = "marvell,armada-xp-gating-clock"; + reg = <0x18220 0x4>; + clocks = <&coreclk 0>; + #clock-cells = <1>; + }; - system-controller@d0018200 { + system-controller@18200 { compatible = "marvell,armada-370-xp-system-controller"; - reg = <0xd0018200 0x500>; - }; + reg = <0x18200 0x500>; + }; - ethernet@d0030000 { + ethernet@30000 { compatible = "marvell,armada-370-neta"; - reg = <0xd0030000 0x2500>; + reg = <0x30000 0x2500>; interrupts = <12>; clocks = <&gateclk 2>; status = "disabled"; - }; - - xor@d0060900 { - compatible = "marvell,orion-xor"; - reg = <0xd0060900 0x100 - 0xd0060b00 0x100>; - clocks = <&gateclk 22>; - status = "okay"; - - xor10 { - interrupts = <51>; - dmacap,memcpy; - dmacap,xor; - }; - xor11 { - interrupts = <52>; - dmacap,memcpy; - dmacap,xor; - dmacap,memset; }; - }; - xor@d00f0900 { - compatible = "marvell,orion-xor"; - reg = <0xd00F0900 0x100 - 0xd00F0B00 0x100>; - clocks = <&gateclk 28>; - status = "okay"; + xor@60900 { + compatible = "marvell,orion-xor"; + reg = <0x60900 0x100 + 0x60b00 0x100>; + clocks = <&gateclk 22>; + status = "okay"; + + xor10 { + interrupts = <51>; + dmacap,memcpy; + dmacap,xor; + }; + xor11 { + interrupts = <52>; + dmacap,memcpy; + dmacap,xor; + dmacap,memset; + }; + }; - xor00 { - interrupts = <94>; - dmacap,memcpy; - dmacap,xor; + xor@f0900 { + compatible = "marvell,orion-xor"; + reg = <0xF0900 0x100 + 0xF0B00 0x100>; + clocks = <&gateclk 28>; + status = "okay"; + + xor00 { + interrupts = <94>; + dmacap,memcpy; + dmacap,xor; + }; + xor01 { + interrupts = <95>; + dmacap,memcpy; + dmacap,xor; + dmacap,memset; + }; }; - xor01 { - interrupts = <95>; - dmacap,memcpy; - dmacap,xor; - dmacap,memset; + + usb@50000 { + clocks = <&gateclk 18>; }; - }; - usb@d0050000 { - clocks = <&gateclk 18>; - }; + usb@51000 { + clocks = <&gateclk 19>; + }; - usb@d0051000 { - clocks = <&gateclk 19>; - }; + usb@52000 { + compatible = "marvell,orion-ehci"; + reg = <0x52000 0x500>; + interrupts = <47>; + clocks = <&gateclk 20>; + status = "disabled"; + }; - usb@d0052000 { - compatible = "marvell,orion-ehci"; - reg = <0xd0052000 0x500>; - interrupts = <47>; - clocks = <&gateclk 20>; - status = "disabled"; + thermal@182b0 { + compatible = "marvell,armadaxp-thermal"; + reg = <0x182b0 0x4 + 0x184d0 0x4>; + status = "okay"; + }; }; - }; }; diff --git a/arch/arm/boot/dts/at91-ariag25.dts b/arch/arm/boot/dts/at91-ariag25.dts new file mode 100644 index 000000000000..c7aebba4e8e7 --- /dev/null +++ b/arch/arm/boot/dts/at91-ariag25.dts @@ -0,0 +1,171 @@ +/* + * at91-ariag25.dts - Device Tree file for Acme Systems Aria G25 (AT91SAM9G25 based) + * + * Copyright (C) 2013 Douglas Gilbert <dgilbert@interlog.com>, + * Robert Nelson <robertcnelson@gmail.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +/include/ "at91sam9g25.dtsi" + +/ { + model = "Acme Systems Aria G25"; + compatible = "acme,ariag25", "atmel,at91sam9x5ek", + "atmel,at91sam9x5", "atmel,at91sam9"; + + aliases { + serial0 = &dbgu; + serial1 = &usart0; + serial2 = &usart1; + serial3 = &usart2; + serial4 = &usart3; + serial5 = &uart0; + }; + + chosen { + bootargs = "console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait"; + }; + + memory { + /* 128 MB, change this for 256 MB revision */ + reg = <0x20000000 0x8000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock@0 { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <12000000>; + }; + }; + + ahb { + apb { + mmc0: mmc@f0008000 { + /* N.B. Aria has no SD card detect (CD), assumed present */ + + pinctrl-0 = < + &pinctrl_mmc0_slot0_clk_cmd_dat0 + &pinctrl_mmc0_slot0_dat1_3>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + }; + }; + + i2c0: i2c@f8010000 { + status = "okay"; + }; + + i2c1: i2c@f8014000 { + status = "okay"; + }; + + /* TWD2+TCLK2 hidden behind ethernet, so no i2c2 */ + + usart0: serial@f801c000 { + pinctrl-0 = <&pinctrl_usart0 + &pinctrl_usart0_rts + &pinctrl_usart0_cts>; + status = "okay"; + }; + + usart1: serial@f8020000 { + pinctrl-0 = <&pinctrl_usart1 + /* &pinctrl_usart1_rts */ + /* &pinctrl_usart1_cts */ + >; + status = "okay"; + }; + + usart2: serial@f8024000 { + /* cannot activate RTS2+CTS2, clash with + * ethernet on PB0 and PB1 */ + pinctrl-0 = <&pinctrl_usart2>; + status = "okay"; + }; + + usart3: serial@f8028000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf8028000 0x200>; + interrupts = <8 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart3 + /* &pinctrl_usart3_rts */ + /* &pinctrl_usart3_cts */ + >; + status = "okay"; + }; + + macb0: ethernet@f802c000 { + phy-mode = "rmii"; + /* + * following can be overwritten by bootloader: + * for example u-boot 'ftd set' command + */ + local-mac-address = [00 00 00 00 00 00]; + status = "okay"; + }; + + uart0: serial@f8040000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf8040000 0x200>; + interrupts = <15 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + status = "okay"; + }; + + adc0: adc@f804c000 { + status = "okay"; + atmel,adc-channels-used = <0xf>; + atmel,adc-num-channels = <4>; + }; + + dbgu: serial@fffff200 { + status = "okay"; + }; + + pinctrl@fffff400 { + w1_0 { + pinctrl_w1_0: w1_0-0 { + atmel,pins = <0 21 0x0 0x1>; /* PA21 PIO, pull-up */ + }; + }; + }; + }; + + usb0: ohci@00600000 { + status = "okay"; + num-ports = <3>; + }; + + usb1: ehci@00700000 { + status = "okay"; + }; + }; + + leds { + compatible = "gpio-leds"; + + /* little green LED in middle of Aria G25 module */ + aria_led { + label = "aria_led"; + gpios = <&pioB 8 0>; /* PB8 */ + linux,default-trigger = "heartbeat"; + }; + + }; + + onewire@0 { + compatible = "w1-gpio"; + gpios = <&pioA 21 1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_w1_0>; + }; +}; diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi index b0268a5f4b4e..5d3ed5aafc69 100644 --- a/arch/arm/boot/dts/at91rm9200.dtsi +++ b/arch/arm/boot/dts/at91rm9200.dtsi @@ -29,6 +29,7 @@ gpio3 = &pioD; tcb0 = &tcb0; tcb1 = &tcb1; + i2c0 = &i2c0; ssc0 = &ssc0; ssc1 = &ssc1; ssc2 = &ssc2; @@ -91,6 +92,17 @@ interrupts = <20 4 0 21 4 0 22 4 0>; }; + i2c0: i2c@fffb8000 { + compatible = "atmel,at91rm9200-i2c"; + reg = <0xfffb8000 0x4000>; + interrupts = <12 4 6>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_twi>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + mmc0: mmc@fffb4000 { compatible = "atmel,hsmci"; reg = <0xfffb4000 0x4000>; @@ -365,6 +377,20 @@ }; }; + twi { + pinctrl_twi: twi-0 { + atmel,pins = + <0 25 0x1 0x2 /* PA25 periph A with multi drive */ + 0 26 0x1 0x2>; /* PA26 periph A with multi drive */ + }; + + pinctrl_twi_gpio: twi_gpio-0 { + atmel,pins = + <0 25 0x0 0x2 /* PA25 GPIO with multi drive */ + 0 26 0x0 0x2>; /* PA26 GPIO with multi drive */ + }; + }; + pioA: gpio@fffff400 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; @@ -500,6 +526,8 @@ i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; i2c-gpio,delay-us = <2>; /* ~100 kHz */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_twi_gpio>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index cb7bcc51608d..70b5ccbac234 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -158,8 +158,8 @@ usart1 { pinctrl_usart1: usart1-0 { atmel,pins = - <2 6 0x1 0x1 /* PB6 periph A with pullup */ - 2 7 0x1 0x0>; /* PB7 periph A */ + <1 6 0x1 0x1 /* PB6 periph A with pullup */ + 1 7 0x1 0x0>; /* PB7 periph A */ }; pinctrl_usart1_rts: usart1_rts-0 { @@ -194,18 +194,18 @@ usart3 { pinctrl_usart3: usart3-0 { atmel,pins = - <2 10 0x1 0x1 /* PB10 periph A with pullup */ - 2 11 0x1 0x0>; /* PB11 periph A */ + <1 10 0x1 0x1 /* PB10 periph A with pullup */ + 1 11 0x1 0x0>; /* PB11 periph A */ }; pinctrl_usart3_rts: usart3_rts-0 { atmel,pins = - <3 8 0x2 0x0>; /* PB8 periph B */ + <2 8 0x2 0x0>; /* PC8 periph B */ }; pinctrl_usart3_cts: usart3_cts-0 { atmel,pins = - <3 10 0x2 0x0>; /* PB10 periph B */ + <2 10 0x2 0x0>; /* PC10 periph B */ }; }; @@ -220,8 +220,8 @@ uart1 { pinctrl_uart1: uart1-0 { atmel,pins = - <2 12 0x1 0x1 /* PB12 periph A with pullup */ - 2 13 0x1 0x0>; /* PB13 periph A */ + <1 12 0x1 0x1 /* PB12 periph A with pullup */ + 1 13 0x1 0x0>; /* PB13 periph A */ }; }; @@ -322,6 +322,24 @@ }; }; + spi0 { + pinctrl_spi0: spi0-0 { + atmel,pins = + <0 0 0x1 0x0 /* PA0 periph A SPI0_MISO pin */ + 0 1 0x1 0x0 /* PA1 periph A SPI0_MOSI pin */ + 0 2 0x1 0x0>; /* PA2 periph A SPI0_SPCK pin */ + }; + }; + + spi1 { + pinctrl_spi1: spi1-0 { + atmel,pins = + <1 0 0x1 0x0 /* PB0 periph A SPI1_MISO pin */ + 1 1 0x1 0x0 /* PB1 periph A SPI1_MOSI pin */ + 1 2 0x1 0x0>; /* PB2 periph A SPI1_SPCK pin */ + }; + }; + pioA: gpio@fffff400 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; @@ -471,6 +489,28 @@ status = "disabled"; }; + spi0: spi@fffc8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91rm9200-spi"; + reg = <0xfffc8000 0x200>; + interrupts = <12 4 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0>; + status = "disabled"; + }; + + spi1: spi@fffcc000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91rm9200-spi"; + reg = <0xfffcc000 0x200>; + interrupts = <13 4 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1>; + status = "disabled"; + }; + adc0: adc@fffe0000 { compatible = "atmel,at91sam9260-adc"; reg = <0xfffe0000 0x100>; @@ -484,6 +524,9 @@ atmel,adc-drdy-mask = <0x10000>; atmel,adc-status-register = <0x1c>; atmel,adc-trigger-register = <0x04>; + atmel,adc-res = <8 10>; + atmel,adc-res-names = "lowres", "highres"; + atmel,adc-use-res = "highres"; trigger@0 { trigger-name = "timer-counter-0"; diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index 271d4de026e9..94b58ab2cc08 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -303,6 +303,24 @@ }; }; + spi0 { + pinctrl_spi0: spi0-0 { + atmel,pins = + <0 0 0x2 0x0 /* PA0 periph B SPI0_MISO pin */ + 0 1 0x2 0x0 /* PA1 periph B SPI0_MOSI pin */ + 0 2 0x2 0x0>; /* PA2 periph B SPI0_SPCK pin */ + }; + }; + + spi1 { + pinctrl_spi1: spi1-0 { + atmel,pins = + <1 12 0x1 0x0 /* PB12 periph A SPI1_MISO pin */ + 1 13 0x1 0x0 /* PB13 periph A SPI1_MOSI pin */ + 1 14 0x1 0x0>; /* PB14 periph A SPI1_SPCK pin */ + }; + }; + pioA: gpio@fffff200 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff200 0x200>; @@ -462,6 +480,28 @@ reg = <0xfffffd40 0x10>; status = "disabled"; }; + + spi0: spi@fffa4000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91rm9200-spi"; + reg = <0xfffa4000 0x200>; + interrupts = <14 4 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0>; + status = "disabled"; + }; + + spi1: spi@fffa8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91rm9200-spi"; + reg = <0xfffa8000 0x200>; + interrupts = <15 4 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1>; + status = "disabled"; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts index 1eb08728f527..3b82d91e7fcc 100644 --- a/arch/arm/boot/dts/at91sam9263ek.dts +++ b/arch/arm/boot/dts/at91sam9263ek.dts @@ -79,6 +79,16 @@ }; }; }; + + spi0: spi@fffa4000 { + status = "okay"; + cs-gpios = <&pioA 5 0>, <0>, <0>, <0>; + mtd_dataflash@0 { + compatible = "atmel,at45", "atmel,dataflash"; + spi-max-frequency = <50000000>; + reg = <0>; + }; + }; }; nand0: nand@40000000 { @@ -155,8 +165,6 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; left_click { label = "left_click"; diff --git a/arch/arm/boot/dts/at91sam9g15.dtsi b/arch/arm/boot/dts/at91sam9g15.dtsi index fbe7a7089c2a..28467fd6bf96 100644 --- a/arch/arm/boot/dts/at91sam9g15.dtsi +++ b/arch/arm/boot/dts/at91sam9g15.dtsi @@ -10,7 +10,7 @@ / { model = "Atmel AT91SAM9G15 SoC"; - compatible = "atmel, at91sam9g15, atmel,at91sam9x5"; + compatible = "atmel,at91sam9g15", "atmel,at91sam9x5"; ahb { apb { diff --git a/arch/arm/boot/dts/at91sam9g15ek.dts b/arch/arm/boot/dts/at91sam9g15ek.dts index 86dd3f6d938f..5427b2dba87e 100644 --- a/arch/arm/boot/dts/at91sam9g15ek.dts +++ b/arch/arm/boot/dts/at91sam9g15ek.dts @@ -11,6 +11,6 @@ /include/ "at91sam9x5ek.dtsi" / { - model = "Atmel AT91SAM9G25-EK"; + model = "Atmel AT91SAM9G15-EK"; compatible = "atmel,at91sam9g15ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; }; diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi index da15e83e7f17..6a92c5baef8c 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi @@ -96,6 +96,16 @@ status = "okay"; pinctrl-0 = <&pinctrl_ssc0_tx>; }; + + spi0: spi@fffc8000 { + status = "okay"; + cs-gpios = <0>, <&pioC 11 0>, <0>, <0>; + mtd_dataflash@0 { + compatible = "atmel,at45", "atmel,dataflash"; + spi-max-frequency = <50000000>; + reg = <1>; + }; + }; }; nand0: nand@40000000 { @@ -167,8 +177,6 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; btn3 { label = "Button 3"; diff --git a/arch/arm/boot/dts/at91sam9g25.dtsi b/arch/arm/boot/dts/at91sam9g25.dtsi index 05a718fb83c4..5fd32df03f25 100644 --- a/arch/arm/boot/dts/at91sam9g25.dtsi +++ b/arch/arm/boot/dts/at91sam9g25.dtsi @@ -10,7 +10,7 @@ / { model = "Atmel AT91SAM9G25 SoC"; - compatible = "atmel, at91sam9g25, atmel,at91sam9x5"; + compatible = "atmel,at91sam9g25", "atmel,at91sam9x5"; ahb { apb { diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts index c5ab16fba059..a1c511fecdc1 100644 --- a/arch/arm/boot/dts/at91sam9g25ek.dts +++ b/arch/arm/boot/dts/at91sam9g25ek.dts @@ -13,4 +13,13 @@ / { model = "Atmel AT91SAM9G25-EK"; compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; + + ahb { + apb { + macb0: ethernet@f802c000 { + phy-mode = "rmii"; + status = "okay"; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/at91sam9g35.dtsi b/arch/arm/boot/dts/at91sam9g35.dtsi index f9d14a722794..d6fa8af50724 100644 --- a/arch/arm/boot/dts/at91sam9g35.dtsi +++ b/arch/arm/boot/dts/at91sam9g35.dtsi @@ -10,7 +10,7 @@ / { model = "Atmel AT91SAM9G35 SoC"; - compatible = "atmel, at91sam9g35, atmel,at91sam9x5"; + compatible = "atmel,at91sam9g35", "atmel,at91sam9x5"; ahb { apb { diff --git a/arch/arm/boot/dts/at91sam9g35ek.dts b/arch/arm/boot/dts/at91sam9g35ek.dts index 95944bdd798d..6f58ab8d21f5 100644 --- a/arch/arm/boot/dts/at91sam9g35ek.dts +++ b/arch/arm/boot/dts/at91sam9g35ek.dts @@ -13,4 +13,13 @@ / { model = "Atmel AT91SAM9G35-EK"; compatible = "atmel,at91sam9g35ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; + + ahb { + apb { + macb0: ethernet@f802c000 { + phy-mode = "rmii"; + status = "okay"; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index 6b1d4cab24c2..bf18a735c37d 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -108,6 +108,7 @@ compatible = "atmel,at91sam9g45-dma"; reg = <0xffffec00 0x200>; interrupts = <21 4 0>; + #dma-cells = <2>; }; pinctrl@fffff200 { @@ -322,6 +323,24 @@ }; }; + spi0 { + pinctrl_spi0: spi0-0 { + atmel,pins = + <1 0 0x1 0x0 /* PB0 periph A SPI0_MISO pin */ + 1 1 0x1 0x0 /* PB1 periph A SPI0_MOSI pin */ + 1 2 0x1 0x0>; /* PB2 periph A SPI0_SPCK pin */ + }; + }; + + spi1 { + pinctrl_spi1: spi1-0 { + atmel,pins = + <1 14 0x1 0x0 /* PB14 periph A SPI1_MISO pin */ + 1 15 0x1 0x0 /* PB15 periph A SPI1_MOSI pin */ + 1 16 0x1 0x0>; /* PB16 periph A SPI1_SPCK pin */ + }; + }; + pioA: gpio@fffff200 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff200 0x200>; @@ -484,6 +503,9 @@ atmel,adc-drdy-mask = <0x10000>; atmel,adc-status-register = <0x1c>; atmel,adc-trigger-register = <0x08>; + atmel,adc-res = <8 10>; + atmel,adc-res-names = "lowres", "highres"; + atmel,adc-use-res = "highres"; trigger@0 { trigger-name = "external-rising"; @@ -512,6 +534,8 @@ compatible = "atmel,hsmci"; reg = <0xfff80000 0x600>; interrupts = <11 4 0>; + dmas = <&dma 1 0>; + dma-names = "rxtx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -521,6 +545,8 @@ compatible = "atmel,hsmci"; reg = <0xfffd0000 0x600>; interrupts = <29 4 0>; + dmas = <&dma 1 13>; + dma-names = "rxtx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -531,6 +557,28 @@ reg = <0xfffffd40 0x10>; status = "disabled"; }; + + spi0: spi@fffa4000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91rm9200-spi"; + reg = <0xfffa4000 0x200>; + interrupts = <14 4 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0>; + status = "disabled"; + }; + + spi1: spi@fffa8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91rm9200-spi"; + reg = <0xfffa8000 0x200>; + interrupts = <15 4 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1>; + status = "disabled"; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index 20c31913c270..51d9251b5bbe 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -102,6 +102,16 @@ }; }; }; + + spi0: spi@fffa4000{ + status = "okay"; + cs-gpios = <&pioB 3 0>, <0>, <0>, <0>; + mtd_dataflash@0 { + compatible = "atmel,at45", "atmel,dataflash"; + spi-max-frequency = <13000000>; + reg = <0>; + }; + }; }; nand0: nand@40000000 { @@ -162,8 +172,6 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; left_click { label = "left_click"; diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index 7750f98dd764..3de8e6dfbcb1 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -89,6 +89,8 @@ compatible = "atmel,hsmci"; reg = <0xf0008000 0x600>; interrupts = <12 4 0>; + dmas = <&dma 1 0>; + dma-names = "rxtx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -110,6 +112,7 @@ compatible = "atmel,at91sam9g45-dma"; reg = <0xffffec00 0x200>; interrupts = <20 4 0>; + #dma-cells = <2>; }; pinctrl@fffff400 { @@ -261,6 +264,24 @@ }; }; + spi0 { + pinctrl_spi0: spi0-0 { + atmel,pins = + <0 11 0x1 0x0 /* PA11 periph A SPI0_MISO pin */ + 0 12 0x1 0x0 /* PA12 periph A SPI0_MOSI pin */ + 0 13 0x1 0x0>; /* PA13 periph A SPI0_SPCK pin */ + }; + }; + + spi1 { + pinctrl_spi1: spi1-0 { + atmel,pins = + <0 21 0x2 0x0 /* PA21 periph B SPI1_MISO pin */ + 0 22 0x2 0x0 /* PA22 periph B SPI1_MOSI pin */ + 0 23 0x2 0x0>; /* PA23 periph B SPI1_SPCK pin */ + }; + }; + pioA: gpio@fffff400 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; @@ -360,6 +381,9 @@ compatible = "atmel,at91sam9x5-i2c"; reg = <0xf8010000 0x100>; interrupts = <9 4 6>; + dmas = <&dma 1 13>, + <&dma 1 14>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -369,8 +393,33 @@ compatible = "atmel,at91sam9x5-i2c"; reg = <0xf8014000 0x100>; interrupts = <10 4 6>; + dmas = <&dma 1 15>, + <&dma 1 16>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi0: spi@f0000000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91rm9200-spi"; + reg = <0xf0000000 0x100>; + interrupts = <13 4 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0>; + status = "disabled"; + }; + + spi1: spi@f0004000 { #address-cells = <1>; #size-cells = <0>; + compatible = "atmel,at91rm9200-spi"; + reg = <0xf0004000 0x100>; + interrupts = <14 4 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index d400f8de4387..d30e48bd1e9d 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -67,6 +67,16 @@ }; }; }; + + spi0: spi@f0000000 { + status = "okay"; + cs-gpios = <&pioA 14 0>, <0>, <0>, <0>; + m25p80@0 { + compatible = "atmel,at25df321a"; + spi-max-frequency = <50000000>; + reg = <0>; + }; + }; }; nand0: nand@40000000 { @@ -104,8 +114,6 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; enter { label = "Enter"; diff --git a/arch/arm/boot/dts/at91sam9x25.dtsi b/arch/arm/boot/dts/at91sam9x25.dtsi index 54eb33ba6d22..9ac2bc2b4f07 100644 --- a/arch/arm/boot/dts/at91sam9x25.dtsi +++ b/arch/arm/boot/dts/at91sam9x25.dtsi @@ -10,7 +10,7 @@ / { model = "Atmel AT91SAM9X25 SoC"; - compatible = "atmel, at91sam9x25, atmel,at91sam9x5"; + compatible = "atmel,at91sam9x25", "atmel,at91sam9x5"; ahb { apb { diff --git a/arch/arm/boot/dts/at91sam9x25ek.dts b/arch/arm/boot/dts/at91sam9x25ek.dts index af907eaa1f25..3b40d11d65e7 100644 --- a/arch/arm/boot/dts/at91sam9x25ek.dts +++ b/arch/arm/boot/dts/at91sam9x25ek.dts @@ -13,4 +13,18 @@ / { model = "Atmel AT91SAM9G25-EK"; compatible = "atmel,at91sam9x25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; + + ahb { + apb { + macb0: ethernet@f802c000 { + phy-mode = "rmii"; + status = "okay"; + }; + + macb1: ethernet@f8030000 { + phy-mode = "rmii"; + status = "okay"; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/at91sam9x35.dtsi b/arch/arm/boot/dts/at91sam9x35.dtsi index fb102d6126ce..ba67d83d17ac 100644 --- a/arch/arm/boot/dts/at91sam9x35.dtsi +++ b/arch/arm/boot/dts/at91sam9x35.dtsi @@ -10,7 +10,7 @@ / { model = "Atmel AT91SAM9X35 SoC"; - compatible = "atmel, at91sam9x35, atmel,at91sam9x5"; + compatible = "atmel,at91sam9x35", "atmel,at91sam9x5"; ahb { apb { diff --git a/arch/arm/boot/dts/at91sam9x35ek.dts b/arch/arm/boot/dts/at91sam9x35ek.dts index 5ccb607b5414..6ad19a0d5424 100644 --- a/arch/arm/boot/dts/at91sam9x35ek.dts +++ b/arch/arm/boot/dts/at91sam9x35ek.dts @@ -13,4 +13,13 @@ / { model = "Atmel AT91SAM9X35-EK"; compatible = "atmel,at91sam9x35ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; + + ahb { + apb { + macb0: ethernet@f802c000 { + phy-mode = "rmii"; + status = "okay"; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index a98c0d50fbbe..1145ac330fb7 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -104,12 +104,14 @@ compatible = "atmel,at91sam9g45-dma"; reg = <0xffffec00 0x200>; interrupts = <20 4 0>; + #dma-cells = <2>; }; dma1: dma-controller@ffffee00 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffee00 0x200>; interrupts = <21 4 0>; + #dma-cells = <2>; }; pinctrl@fffff400 { @@ -343,6 +345,72 @@ }; }; + spi0 { + pinctrl_spi0: spi0-0 { + atmel,pins = + <0 11 0x1 0x0 /* PA11 periph A SPI0_MISO pin */ + 0 12 0x1 0x0 /* PA12 periph A SPI0_MOSI pin */ + 0 13 0x1 0x0>; /* PA13 periph A SPI0_SPCK pin */ + }; + }; + + spi1 { + pinctrl_spi1: spi1-0 { + atmel,pins = + <0 21 0x2 0x0 /* PA21 periph B SPI1_MISO pin */ + 0 22 0x2 0x0 /* PA22 periph B SPI1_MOSI pin */ + 0 23 0x2 0x0>; /* PA23 periph B SPI1_SPCK pin */ + }; + }; + + i2c0 { + pinctrl_i2c0: i2c0-0 { + atmel,pins = + <0 30 0x1 0x0 /* PA30 periph A I2C0 data */ + 0 31 0x1 0x0>; /* PA31 periph A I2C0 clock */ + }; + }; + + i2c1 { + pinctrl_i2c1: i2c1-0 { + atmel,pins = + <2 0 0x3 0x0 /* PC0 periph C I2C1 data */ + 2 1 0x3 0x0>; /* PC1 periph C I2C1 clock */ + }; + }; + + i2c2 { + pinctrl_i2c2: i2c2-0 { + atmel,pins = + <1 4 0x2 0x0 /* PB4 periph B I2C2 data */ + 1 5 0x2 0x0>; /* PB5 periph B I2C2 clock */ + }; + }; + + i2c_gpio0 { + pinctrl_i2c_gpio0: i2c_gpio0-0 { + atmel,pins = + <0 30 0x0 0x2 /* PA30 gpio multidrive I2C0 data */ + 0 31 0x0 0x2>; /* PA31 gpio multidrive I2C0 clock */ + }; + }; + + i2c_gpio1 { + pinctrl_i2c_gpio1: i2c_gpio1-0 { + atmel,pins = + <2 0 0x0 0x2 /* PC0 gpio multidrive I2C1 data */ + 2 1 0x0 0x2>; /* PC1 gpio multidrive I2C1 clock */ + }; + }; + + i2c_gpio2 { + pinctrl_i2c_gpio2: i2c_gpio2-0 { + atmel,pins = + <1 4 0x0 0x2 /* PB4 gpio multidrive I2C2 data */ + 1 5 0x0 0x2>; /* PB5 gpio multidrive I2C2 clock */ + }; + }; + pioA: gpio@fffff400 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; @@ -399,6 +467,8 @@ compatible = "atmel,hsmci"; reg = <0xf0008000 0x600>; interrupts = <12 4 0>; + dmas = <&dma0 1 0>; + dma-names = "rxtx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -408,6 +478,8 @@ compatible = "atmel,hsmci"; reg = <0xf000c000 0x600>; interrupts = <26 4 0>; + dmas = <&dma1 1 0>; + dma-names = "rxtx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -469,8 +541,13 @@ compatible = "atmel,at91sam9x5-i2c"; reg = <0xf8010000 0x100>; interrupts = <9 4 6>; + dmas = <&dma0 1 7>, + <&dma0 1 8>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; status = "disabled"; }; @@ -478,8 +555,13 @@ compatible = "atmel,at91sam9x5-i2c"; reg = <0xf8014000 0x100>; interrupts = <10 4 6>; + dmas = <&dma1 1 5>, + <&dma1 1 6>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; status = "disabled"; }; @@ -487,8 +569,13 @@ compatible = "atmel,at91sam9x5-i2c"; reg = <0xf8018000 0x100>; interrupts = <11 4 6>; + dmas = <&dma0 1 9>, + <&dma0 1 10>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; status = "disabled"; }; @@ -505,6 +592,9 @@ atmel,adc-drdy-mask = <0x1000000>; atmel,adc-status-register = <0x30>; atmel,adc-trigger-register = <0xc0>; + atmel,adc-res = <8 10>; + atmel,adc-res-names = "lowres", "highres"; + atmel,adc-use-res = "highres"; trigger@0 { trigger-name = "external-rising"; @@ -529,6 +619,35 @@ trigger-value = <0x6>; }; }; + + spi0: spi@f0000000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91rm9200-spi"; + reg = <0xf0000000 0x100>; + interrupts = <13 4 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0>; + status = "disabled"; + }; + + spi1: spi@f0004000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91rm9200-spi"; + reg = <0xf0004000 0x100>; + interrupts = <14 4 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1>; + status = "disabled"; + }; + + rtc@fffffeb0 { + compatible = "atmel,at91rm9200-rtc"; + reg = <0xfffffeb0 0x40>; + interrupts = <1 4 7>; + status = "disabled"; + }; }; nand0: nand@40000000 { @@ -577,6 +696,8 @@ i2c-gpio,delay-us = <2>; /* ~100 kHz */ #address-cells = <1>; #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c_gpio0>; status = "disabled"; }; @@ -590,6 +711,8 @@ i2c-gpio,delay-us = <2>; /* ~100 kHz */ #address-cells = <1>; #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c_gpio1>; status = "disabled"; }; @@ -603,6 +726,8 @@ i2c-gpio,delay-us = <2>; /* ~100 kHz */ #address-cells = <1>; #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c_gpio2>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9x5cm.dtsi b/arch/arm/boot/dts/at91sam9x5cm.dtsi index 4027ac7e4502..347a74a857f6 100644 --- a/arch/arm/boot/dts/at91sam9x5cm.dtsi +++ b/arch/arm/boot/dts/at91sam9x5cm.dtsi @@ -24,6 +24,16 @@ }; ahb { + apb { + pinctrl@fffff400 { + 1wire_cm { + pinctrl_1wire_cm: 1wire_cm-0 { + atmel,pins = <1 18 0x0 0x2>; /* PB18 multidrive, conflicts with led */ + }; + }; + }; + }; + nand0: nand@40000000 { nand-bus-width = <8>; nand-ecc-mode = "hw"; @@ -74,4 +84,14 @@ gpios = <&pioD 21 0>; }; }; + + 1wire_cm { + compatible = "w1-gpio"; + gpios = <&pioB 18 0>; + linux,open-drain; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_1wire_cm>; + status = "okay"; + }; + }; diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi index 8a7cf1d9cf5d..1fa48d2bfd80 100644 --- a/arch/arm/boot/dts/at91sam9x5ek.dtsi +++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi @@ -13,7 +13,7 @@ compatible = "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; chosen { - bootargs = "128M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs"; + bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs"; }; ahb { @@ -52,23 +52,10 @@ status = "okay"; }; - macb0: ethernet@f802c000 { - phy-mode = "rmii"; - status = "okay"; - }; - i2c0: i2c@f8010000 { status = "okay"; }; - i2c1: i2c@f8014000 { - status = "okay"; - }; - - i2c2: i2c@f8018000 { - status = "okay"; - }; - pinctrl@fffff400 { mmc0 { pinctrl_board_mmc0: mmc0-board { @@ -84,6 +71,16 @@ }; }; }; + + spi0: spi@f0000000 { + status = "okay"; + cs-gpios = <&pioA 14 0>, <0>, <0>, <0>; + m25p80@0 { + compatible = "atmel,at25df321a"; + spi-max-frequency = <50000000>; + reg = <0>; + }; + }; }; usb0: ohci@00600000 { diff --git a/arch/arm/boot/dts/atlas6-evb.dts b/arch/arm/boot/dts/atlas6-evb.dts new file mode 100644 index 000000000000..ab042ca8dea1 --- /dev/null +++ b/arch/arm/boot/dts/atlas6-evb.dts @@ -0,0 +1,78 @@ +/* + * DTS file for CSR SiRFatlas6 Evaluation Board + * + * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +/dts-v1/; + +/include/ "atlas6.dtsi" + +/ { + model = "CSR SiRFatlas6 Evaluation Board"; + compatible = "sirf,atlas6-cb", "sirf,atlas6"; + + memory { + reg = <0x00000000 0x20000000>; + }; + + axi { + peri-iobg { + uart@b0060000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_a>; + }; + spi@b00d0000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins_a>; + spi@0 { + compatible = "spidev"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + spi@b0170000 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins_a>; + }; + i2c0: i2c@b00e0000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + lcd@40 { + compatible = "sirf,lcd"; + reg = <0x40>; + }; + }; + + }; + disp-iobg { + lcd@90010000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_24pins_a>; + }; + }; + }; + display: display@0 { + panels { + panel0: panel@0 { + panel-name = "Innolux TFT"; + hactive = <800>; + vactive = <480>; + left_margin = <20>; + right_margin = <234>; + upper_margin = <3>; + lower_margin = <41>; + hsync_len = <3>; + vsync_len = <2>; + pixclock = <33264000>; + sync = <3>; + timing = <0x88>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/atlas6.dtsi b/arch/arm/boot/dts/atlas6.dtsi new file mode 100644 index 000000000000..7d1a27949c13 --- /dev/null +++ b/arch/arm/boot/dts/atlas6.dtsi @@ -0,0 +1,668 @@ +/* + * DTS file for CSR SiRFatlas6 SoC + * + * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +/include/ "skeleton.dtsi" +/ { + compatible = "sirf,atlas6"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&intc>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + reg = <0x0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + /* from bootloader */ + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + }; + }; + + axi { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x40000000 0x40000000 0x80000000>; + + intc: interrupt-controller@80020000 { + #interrupt-cells = <1>; + interrupt-controller; + compatible = "sirf,prima2-intc"; + reg = <0x80020000 0x1000>; + }; + + sys-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x88000000 0x88000000 0x40000>; + + clks: clock-controller@88000000 { + compatible = "sirf,atlas6-clkc"; + reg = <0x88000000 0x1000>; + interrupts = <3>; + #clock-cells = <1>; + }; + + reset-controller@88010000 { + compatible = "sirf,prima2-rstc"; + reg = <0x88010000 0x1000>; + }; + + rsc-controller@88020000 { + compatible = "sirf,prima2-rsc"; + reg = <0x88020000 0x1000>; + }; + }; + + mem-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x90000000 0x90000000 0x10000>; + + memory-controller@90000000 { + compatible = "sirf,prima2-memc"; + reg = <0x90000000 0x10000>; + interrupts = <27>; + clocks = <&clks 5>; + }; + }; + + disp-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x90010000 0x90010000 0x30000>; + + lcd@90010000 { + compatible = "sirf,prima2-lcd"; + reg = <0x90010000 0x20000>; + interrupts = <30>; + clocks = <&clks 34>; + display=<&display>; + /* later transfer to pwm */ + bl-gpio = <&gpio 7 0>; + default-panel = <&panel0>; + }; + + vpp@90020000 { + compatible = "sirf,prima2-vpp"; + reg = <0x90020000 0x10000>; + interrupts = <31>; + clocks = <&clks 35>; + }; + }; + + graphics-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x98000000 0x98000000 0x8000000>; + + graphics@98000000 { + compatible = "powervr,sgx510"; + reg = <0x98000000 0x8000000>; + interrupts = <6>; + clocks = <&clks 32>; + }; + }; + + dsp-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xa8000000 0xa8000000 0x2000000>; + + dspif@a8000000 { + compatible = "sirf,prima2-dspif"; + reg = <0xa8000000 0x10000>; + interrupts = <9>; + }; + + gps@a8010000 { + compatible = "sirf,prima2-gps"; + reg = <0xa8010000 0x10000>; + interrupts = <7>; + clocks = <&clks 9>; + }; + + dsp@a9000000 { + compatible = "sirf,prima2-dsp"; + reg = <0xa9000000 0x1000000>; + interrupts = <8>; + clocks = <&clks 8>; + }; + }; + + peri-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xb0000000 0xb0000000 0x180000>, + <0x56000000 0x56000000 0x1b00000>; + + timer@b0020000 { + compatible = "sirf,prima2-tick"; + reg = <0xb0020000 0x1000>; + interrupts = <0>; + }; + + nand@b0030000 { + compatible = "sirf,prima2-nand"; + reg = <0xb0030000 0x10000>; + interrupts = <41>; + clocks = <&clks 26>; + }; + + audio@b0040000 { + compatible = "sirf,prima2-audio"; + reg = <0xb0040000 0x10000>; + interrupts = <35>; + clocks = <&clks 27>; + }; + + uart0: uart@b0050000 { + cell-index = <0>; + compatible = "sirf,prima2-uart"; + reg = <0xb0050000 0x1000>; + interrupts = <17>; + fifosize = <128>; + clocks = <&clks 13>; + }; + + uart1: uart@b0060000 { + cell-index = <1>; + compatible = "sirf,prima2-uart"; + reg = <0xb0060000 0x1000>; + interrupts = <18>; + fifosize = <32>; + clocks = <&clks 14>; + }; + + uart2: uart@b0070000 { + cell-index = <2>; + compatible = "sirf,prima2-uart"; + reg = <0xb0070000 0x1000>; + interrupts = <19>; + fifosize = <128>; + clocks = <&clks 15>; + }; + + usp0: usp@b0080000 { + cell-index = <0>; + compatible = "sirf,prima2-usp"; + reg = <0xb0080000 0x10000>; + interrupts = <20>; + clocks = <&clks 28>; + }; + + usp1: usp@b0090000 { + cell-index = <1>; + compatible = "sirf,prima2-usp"; + reg = <0xb0090000 0x10000>; + interrupts = <21>; + clocks = <&clks 29>; + }; + + dmac0: dma-controller@b00b0000 { + cell-index = <0>; + compatible = "sirf,prima2-dmac"; + reg = <0xb00b0000 0x10000>; + interrupts = <12>; + clocks = <&clks 24>; + }; + + dmac1: dma-controller@b0160000 { + cell-index = <1>; + compatible = "sirf,prima2-dmac"; + reg = <0xb0160000 0x10000>; + interrupts = <13>; + clocks = <&clks 25>; + }; + + vip@b00C0000 { + compatible = "sirf,prima2-vip"; + reg = <0xb00C0000 0x10000>; + clocks = <&clks 31>; + }; + + spi0: spi@b00d0000 { + cell-index = <0>; + compatible = "sirf,prima2-spi"; + reg = <0xb00d0000 0x10000>; + interrupts = <15>; + sirf,spi-num-chipselects = <1>; + cs-gpios = <&gpio 0 0>; + sirf,spi-dma-rx-channel = <25>; + sirf,spi-dma-tx-channel = <20>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clks 19>; + status = "disabled"; + }; + + spi1: spi@b0170000 { + cell-index = <1>; + compatible = "sirf,prima2-spi"; + reg = <0xb0170000 0x10000>; + interrupts = <16>; + clocks = <&clks 20>; + status = "disabled"; + }; + + i2c0: i2c@b00e0000 { + cell-index = <0>; + compatible = "sirf,prima2-i2c"; + reg = <0xb00e0000 0x10000>; + interrupts = <24>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clks 17>; + }; + + i2c1: i2c@b00f0000 { + cell-index = <1>; + compatible = "sirf,prima2-i2c"; + reg = <0xb00f0000 0x10000>; + interrupts = <25>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clks 18>; + }; + + tsc@b0110000 { + compatible = "sirf,prima2-tsc"; + reg = <0xb0110000 0x10000>; + interrupts = <33>; + clocks = <&clks 16>; + }; + + gpio: pinctrl@b0120000 { + #gpio-cells = <2>; + #interrupt-cells = <2>; + compatible = "sirf,atlas6-pinctrl"; + reg = <0xb0120000 0x10000>; + interrupts = <43 44 45 46 47>; + gpio-controller; + interrupt-controller; + + lcd_16pins_a: lcd0@0 { + lcd { + sirf,pins = "lcd_16bitsgrp"; + sirf,function = "lcd_16bits"; + }; + }; + lcd_18pins_a: lcd0@1 { + lcd { + sirf,pins = "lcd_18bitsgrp"; + sirf,function = "lcd_18bits"; + }; + }; + lcd_24pins_a: lcd0@2 { + lcd { + sirf,pins = "lcd_24bitsgrp"; + sirf,function = "lcd_24bits"; + }; + }; + lcdrom_pins_a: lcdrom0@0 { + lcd { + sirf,pins = "lcdromgrp"; + sirf,function = "lcdrom"; + }; + }; + uart0_pins_a: uart0@0 { + uart { + sirf,pins = "uart0grp"; + sirf,function = "uart0"; + }; + }; + uart1_pins_a: uart1@0 { + uart { + sirf,pins = "uart1grp"; + sirf,function = "uart1"; + }; + }; + uart2_pins_a: uart2@0 { + uart { + sirf,pins = "uart2grp"; + sirf,function = "uart2"; + }; + }; + uart2_noflow_pins_a: uart2@1 { + uart { + sirf,pins = "uart2_nostreamctrlgrp"; + sirf,function = "uart2_nostreamctrl"; + }; + }; + spi0_pins_a: spi0@0 { + spi { + sirf,pins = "spi0grp"; + sirf,function = "spi0"; + }; + }; + spi1_pins_a: spi1@0 { + spi { + sirf,pins = "spi1grp"; + sirf,function = "spi1"; + }; + }; + i2c0_pins_a: i2c0@0 { + i2c { + sirf,pins = "i2c0grp"; + sirf,function = "i2c0"; + }; + }; + i2c1_pins_a: i2c1@0 { + i2c { + sirf,pins = "i2c1grp"; + sirf,function = "i2c1"; + }; + }; + pwm0_pins_a: pwm0@0 { + pwm { + sirf,pins = "pwm0grp"; + sirf,function = "pwm0"; + }; + }; + pwm1_pins_a: pwm1@0 { + pwm { + sirf,pins = "pwm1grp"; + sirf,function = "pwm1"; + }; + }; + pwm2_pins_a: pwm2@0 { + pwm { + sirf,pins = "pwm2grp"; + sirf,function = "pwm2"; + }; + }; + pwm3_pins_a: pwm3@0 { + pwm { + sirf,pins = "pwm3grp"; + sirf,function = "pwm3"; + }; + }; + pwm4_pins_a: pwm4@0 { + pwm { + sirf,pins = "pwm4grp"; + sirf,function = "pwm4"; + }; + }; + gps_pins_a: gps@0 { + gps { + sirf,pins = "gpsgrp"; + sirf,function = "gps"; + }; + }; + vip_pins_a: vip@0 { + vip { + sirf,pins = "vipgrp"; + sirf,function = "vip"; + }; + }; + sdmmc0_pins_a: sdmmc0@0 { + sdmmc0 { + sirf,pins = "sdmmc0grp"; + sirf,function = "sdmmc0"; + }; + }; + sdmmc1_pins_a: sdmmc1@0 { + sdmmc1 { + sirf,pins = "sdmmc1grp"; + sirf,function = "sdmmc1"; + }; + }; + sdmmc2_pins_a: sdmmc2@0 { + sdmmc2 { + sirf,pins = "sdmmc2grp"; + sirf,function = "sdmmc2"; + }; + }; + sdmmc2_nowp_pins_a: sdmmc2_nowp@0 { + sdmmc2_nowp { + sirf,pins = "sdmmc2_nowpgrp"; + sirf,function = "sdmmc2_nowp"; + }; + }; + sdmmc3_pins_a: sdmmc3@0 { + sdmmc3 { + sirf,pins = "sdmmc3grp"; + sirf,function = "sdmmc3"; + }; + }; + sdmmc5_pins_a: sdmmc5@0 { + sdmmc5 { + sirf,pins = "sdmmc5grp"; + sirf,function = "sdmmc5"; + }; + }; + i2s_pins_a: i2s@0 { + i2s { + sirf,pins = "i2sgrp"; + sirf,function = "i2s"; + }; + }; + i2s_no_din_pins_a: i2s_no_din@0 { + i2s_no_din { + sirf,pins = "i2s_no_dingrp"; + sirf,function = "i2s_no_din"; + }; + }; + i2s_6chn_pins_a: i2s_6chn@0 { + i2s_6chn { + sirf,pins = "i2s_6chngrp"; + sirf,function = "i2s_6chn"; + }; + }; + ac97_pins_a: ac97@0 { + ac97 { + sirf,pins = "ac97grp"; + sirf,function = "ac97"; + }; + }; + nand_pins_a: nand@0 { + nand { + sirf,pins = "nandgrp"; + sirf,function = "nand"; + }; + }; + usp0_pins_a: usp0@0 { + usp0 { + sirf,pins = "usp0grp"; + sirf,function = "usp0"; + }; + }; + usp1_pins_a: usp1@0 { + usp1 { + sirf,pins = "usp1grp"; + sirf,function = "usp1"; + }; + }; + usb0_upli_drvbus_pins_a: usb0_upli_drvbus@0 { + usb0_upli_drvbus { + sirf,pins = "usb0_upli_drvbusgrp"; + sirf,function = "usb0_upli_drvbus"; + }; + }; + usb1_utmi_drvbus_pins_a: usb1_utmi_drvbus@0 { + usb1_utmi_drvbus { + sirf,pins = "usb1_utmi_drvbusgrp"; + sirf,function = "usb1_utmi_drvbus"; + }; + }; + warm_rst_pins_a: warm_rst@0 { + warm_rst { + sirf,pins = "warm_rstgrp"; + sirf,function = "warm_rst"; + }; + }; + pulse_count_pins_a: pulse_count@0 { + pulse_count { + sirf,pins = "pulse_countgrp"; + sirf,function = "pulse_count"; + }; + }; + cko0_rst_pins_a: cko0_rst@0 { + cko0_rst { + sirf,pins = "cko0_rstgrp"; + sirf,function = "cko0_rst"; + }; + }; + cko1_rst_pins_a: cko1_rst@0 { + cko1_rst { + sirf,pins = "cko1_rstgrp"; + sirf,function = "cko1_rst"; + }; + }; + }; + + pwm@b0130000 { + compatible = "sirf,prima2-pwm"; + reg = <0xb0130000 0x10000>; + clocks = <&clks 21>; + }; + + efusesys@b0140000 { + compatible = "sirf,prima2-efuse"; + reg = <0xb0140000 0x10000>; + clocks = <&clks 22>; + }; + + pulsec@b0150000 { + compatible = "sirf,prima2-pulsec"; + reg = <0xb0150000 0x10000>; + interrupts = <48>; + clocks = <&clks 23>; + }; + + pci-iobg { + compatible = "sirf,prima2-pciiobg", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x56000000 0x56000000 0x1b00000>; + + sd0: sdhci@56000000 { + cell-index = <0>; + compatible = "sirf,prima2-sdhc"; + reg = <0x56000000 0x100000>; + interrupts = <38>; + bus-width = <8>; + clocks = <&clks 36>; + }; + + sd1: sdhci@56100000 { + cell-index = <1>; + compatible = "sirf,prima2-sdhc"; + reg = <0x56100000 0x100000>; + interrupts = <38>; + status = "disabled"; + clocks = <&clks 36>; + }; + + sd2: sdhci@56200000 { + cell-index = <2>; + compatible = "sirf,prima2-sdhc"; + reg = <0x56200000 0x100000>; + interrupts = <23>; + status = "disabled"; + clocks = <&clks 37>; + }; + + sd3: sdhci@56300000 { + cell-index = <3>; + compatible = "sirf,prima2-sdhc"; + reg = <0x56300000 0x100000>; + interrupts = <23>; + status = "disabled"; + clocks = <&clks 37>; + }; + + sd5: sdhci@56500000 { + cell-index = <5>; + compatible = "sirf,prima2-sdhc"; + reg = <0x56500000 0x100000>; + interrupts = <39>; + status = "disabled"; + clocks = <&clks 38>; + }; + + pci-copy@57900000 { + compatible = "sirf,prima2-pcicp"; + reg = <0x57900000 0x100000>; + interrupts = <40>; + }; + + rom-interface@57a00000 { + compatible = "sirf,prima2-romif"; + reg = <0x57a00000 0x100000>; + }; + }; + }; + + rtc-iobg { + compatible = "sirf,prima2-rtciobg", "sirf-prima2-rtciobg-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x80030000 0x10000>; + + gpsrtc@1000 { + compatible = "sirf,prima2-gpsrtc"; + reg = <0x1000 0x1000>; + interrupts = <55 56 57>; + }; + + sysrtc@2000 { + compatible = "sirf,prima2-sysrtc"; + reg = <0x2000 0x1000>; + interrupts = <52 53 54>; + }; + + pwrc@3000 { + compatible = "sirf,prima2-pwrc"; + reg = <0x3000 0x1000>; + interrupts = <32>; + }; + }; + + uus-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xb8000000 0xb8000000 0x40000>; + + usb0: usb@b00e0000 { + compatible = "chipidea,ci13611a-prima2"; + reg = <0xb8000000 0x10000>; + interrupts = <10>; + clocks = <&clks 40>; + }; + + usb1: usb@b00f0000 { + compatible = "chipidea,ci13611a-prima2"; + reg = <0xb8010000 0x10000>; + interrupts = <11>; + clocks = <&clks 41>; + }; + + security@b00f0000 { + compatible = "sirf,prima2-security"; + reg = <0xb8030000 0x10000>; + interrupts = <42>; + clocks = <&clks 7>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi index ad135885bd2a..41b2c6c33f09 100644 --- a/arch/arm/boot/dts/bcm11351.dtsi +++ b/arch/arm/boot/dts/bcm11351.dtsi @@ -31,6 +31,11 @@ <0x3ff00100 0x100>; }; + smc@0x3404c000 { + compatible = "bcm,bcm11351-smc", "bcm,kona-smc"; + reg = <0x3404c000 0x400>; //1 KiB in SRAM + }; + uart@3e000000 { compatible = "bcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart"; status = "disabled"; @@ -47,4 +52,12 @@ cache-unified; cache-level = <2>; }; + + timer@35006000 { + compatible = "bcm,kona-timer"; + reg = <0x35006000 0x1000>; + interrupts = <0x0 7 0x4>; + clock-frequency = <32768>; + }; + }; diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi index 7e0481e2441a..f0052dccf9a8 100644 --- a/arch/arm/boot/dts/bcm2835.dtsi +++ b/arch/arm/boot/dts/bcm2835.dtsi @@ -34,6 +34,11 @@ reg = <0x7e100000 0x28>; }; + rng { + compatible = "brcm,bcm2835-rng"; + reg = <0x7e104000 0x10>; + }; + uart@20201000 { compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell"; reg = <0x7e201000 0x1000>; @@ -64,6 +69,16 @@ #interrupt-cells = <2>; }; + spi: spi@20204000 { + compatible = "brcm,bcm2835-spi"; + reg = <0x7e204000 0x1000>; + interrupts = <2 22>; + clocks = <&clk_spi>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + i2c0: i2c@20205000 { compatible = "brcm,bcm2835-i2c"; reg = <0x7e205000 0x1000>; @@ -107,5 +122,12 @@ #clock-cells = <0>; clock-frequency = <250000000>; }; + + clk_spi: spi { + compatible = "fixed-clock"; + reg = <2>; + #clock-cells = <0>; + clock-frequency = <250000000>; + }; }; }; diff --git a/arch/arm/boot/dts/cros5250-common.dtsi b/arch/arm/boot/dts/cros5250-common.dtsi index 46c098017036..0a61bbb9102f 100644 --- a/arch/arm/boot/dts/cros5250-common.dtsi +++ b/arch/arm/boot/dts/cros5250-common.dtsi @@ -19,31 +19,168 @@ chosen { }; + pinctrl@11400000 { + /* + * Disabled pullups since external part has its own pullups and + * double-pulling gets us out of spec in some cases. + */ + i2c2_bus: i2c2-bus { + samsung,pin-pud = <0>; + }; + }; + i2c@12C60000 { samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <378000>; - gpios = <&gpb3 0 2 3 0>, - <&gpb3 1 2 3 0>; + + max77686@09 { + compatible = "maxim,max77686"; + reg = <0x09>; + + voltage-regulators { + ldo1_reg: LDO1 { + regulator-name = "P1.0V_LDO_OUT1"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo2_reg: LDO2 { + regulator-name = "P1.8V_LDO_OUT2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "P1.8V_LDO_OUT3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo7_reg: LDO7 { + regulator-name = "P1.1V_LDO_OUT7"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + ldo8_reg: LDO8 { + regulator-name = "P1.0V_LDO_OUT8"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo10_reg: LDO10 { + regulator-name = "P1.8V_LDO_OUT10"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo12_reg: LDO12 { + regulator-name = "P3.0V_LDO_OUT12"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + ldo14_reg: LDO14 { + regulator-name = "P1.8V_LDO_OUT14"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo15_reg: LDO15 { + regulator-name = "P1.0V_LDO_OUT15"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo16_reg: LDO16 { + regulator-name = "P1.8V_LDO_OUT16"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + buck3_reg: BUCK3 { + regulator-name = "vdd_int"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + buck5_reg: BUCK5 { + regulator-name = "P1.8V_BUCK_OUT5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + buck6_reg: BUCK6 { + regulator-name = "P1.35V_BUCK_OUT6"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + buck7_reg: BUCK7 { + regulator-name = "P2.0V_BUCK_OUT7"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + }; + + buck8_reg: BUCK8 { + regulator-name = "P2.85V_BUCK_OUT8"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + }; + }; }; i2c@12C70000 { samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <378000>; - gpios = <&gpb3 2 2 3 0>, - <&gpb3 3 2 3 0>; }; i2c@12C80000 { samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; - /* - * Disabled pullups since external part has its own pullups and - * double-pulling gets us out of spec in some cases. - */ - gpios = <&gpa0 6 3 0 0>, - <&gpa0 7 3 0 0>; - hdmiddc@50 { compatible = "samsung,exynos5-hdmiddc"; reg = <0x50>; @@ -53,19 +190,16 @@ i2c@12C90000 { samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; - gpios = <&gpa1 2 3 3 0>, - <&gpa1 3 3 3 0>; }; i2c@12CA0000 { - status = "disabled"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; }; i2c@12CB0000 { samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; - gpios = <&gpa2 2 3 3 0>, - <&gpa2 3 3 3 0>; }; i2c@12CC0000 { @@ -75,8 +209,6 @@ i2c@12CD0000 { samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; - gpios = <&gpb2 2 3 3 0>, - <&gpb2 3 3 3 0>; }; i2c@12CE0000 { @@ -98,15 +230,12 @@ samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>; slot@0 { reg = <0>; bus-width = <8>; - gpios = <&gpc0 0 2 0 3>, <&gpc0 1 2 0 3>, - <&gpc1 0 2 3 3>, <&gpc1 1 2 3 3>, - <&gpc1 2 2 3 3>, <&gpc1 3 2 3 3>, - <&gpc0 3 2 3 3>, <&gpc0 4 2 3 3>, - <&gpc0 5 2 3 3>, <&gpc0 6 2 3 3>; }; }; @@ -122,15 +251,13 @@ samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; slot@0 { reg = <0>; bus-width = <4>; - samsung,cd-pinmux-gpio = <&gpc3 2 2 3 3>; - wp-gpios = <&gpc2 1 0 0 3>; - gpios = <&gpc3 0 2 0 3>, <&gpc3 1 2 0 3>, - <&gpc3 3 2 3 3>, <&gpc3 4 2 3 3>, - <&gpc3 5 2 3 3>, <&gpc3 6 2 3 3>; + wp-gpios = <&gpc2 1 0>; }; }; @@ -143,11 +270,11 @@ samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; + /* See board-specific dts files for pin setup */ slot@0 { reg = <0>; bus-width = <4>; - /* See board-specific dts files for GPIOs */ }; }; @@ -156,9 +283,6 @@ }; spi_1: spi@12d30000 { - gpios = <&gpa2 4 2 3 0>, - <&gpa2 6 2 3 0>, - <&gpa2 7 2 3 0>; samsung,spi-src-clk = <0>; num-cs = <1>; }; @@ -168,7 +292,7 @@ }; hdmi { - hpd-gpio = <&gpx3 7 0xf 1 3>; + hpd-gpio = <&gpx3 7 0>; }; gpio-keys { @@ -176,7 +300,7 @@ power { label = "Power"; - gpios = <&gpx1 3 0 0x10000 0>; + gpios = <&gpx1 3 1>; linux,code = <116>; /* KEY_POWER */ gpio-key,wakeup; }; diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts index f712fb607a42..c914357c0d89 100644 --- a/arch/arm/boot/dts/da850-evm.dts +++ b/arch/arm/boot/dts/da850-evm.dts @@ -35,14 +35,124 @@ clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins>; + + tps: tps@48 { + reg = <0x48>; + }; }; wdt: wdt@1c21000 { status = "okay"; }; + mmc0: mmc@1c40000 { + max-frequency = <50000000>; + bus-width = <4>; + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + }; + spi1: spi@1f0e000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins &spi1_cs0_pin>; + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p64"; + spi-max-frequency = <30000000>; + reg = <0>; + partition@0 { + label = "U-Boot-SPL"; + reg = <0x00000000 0x00010000>; + read-only; + }; + partition@1 { + label = "U-Boot"; + reg = <0x00010000 0x00080000>; + read-only; + }; + partition@2 { + label = "U-Boot-Env"; + reg = <0x00090000 0x00010000>; + read-only; + }; + partition@3 { + label = "Kernel"; + reg = <0x000a0000 0x00280000>; + }; + partition@4 { + label = "Filesystem"; + reg = <0x00320000 0x00400000>; + }; + partition@5 { + label = "MAC-Address"; + reg = <0x007f0000 0x00010000>; + read-only; + }; + }; + }; }; nand_cs3@62000000 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&nand_cs3_pins>; }; + vbat: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vbat"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; +}; + +/include/ "tps6507x.dtsi" + +&tps { + vdcdc1_2-supply = <&vbat>; + vdcdc3-supply = <&vbat>; + vldo1_2-supply = <&vbat>; + + regulators { + vdcdc1_reg: regulator@0 { + regulator-name = "VDCDC1_3.3V"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3450000>; + regulator-always-on; + regulator-boot-on; + }; + + vdcdc2_reg: regulator@1 { + regulator-name = "VDCDC2_3.3V"; + regulator-min-microvolt = <1710000>; + regulator-max-microvolt = <3450000>; + regulator-always-on; + regulator-boot-on; + ti,defdcdc_default = <1>; + }; + + vdcdc3_reg: regulator@2 { + regulator-name = "VDCDC3_1.2V"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + ti,defdcdc_default = <1>; + }; + + ldo1_reg: regulator@3 { + regulator-name = "LDO1_1.8V"; + regulator-min-microvolt = <1710000>; + regulator-max-microvolt = <1890000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo2_reg: regulator@4 { + regulator-name = "LDO2_1.2V"; + regulator-min-microvolt = <1140000>; + regulator-max-microvolt = <1320000>; + regulator-always-on; + regulator-boot-on; + }; + }; }; diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi index 3ec1bda64356..2c88313d2c7a 100644 --- a/arch/arm/boot/dts/da850.dtsi +++ b/arch/arm/boot/dts/da850.dtsi @@ -62,6 +62,69 @@ 0x10 0x00002200 0x0000ff00 >; }; + mmc0_pins: pinmux_mmc_pins { + pinctrl-single,bits = < + /* MMCSD0_DAT[3] MMCSD0_DAT[2] + * MMCSD0_DAT[1] MMCSD0_DAT[0] + * MMCSD0_CMD MMCSD0_CLK + */ + 0x28 0x00222222 0x00ffffff + >; + }; + ehrpwm0a_pins: pinmux_ehrpwm0a_pins { + pinctrl-single,bits = < + /* EPWM0A */ + 0xc 0x00000002 0x0000000f + >; + }; + ehrpwm0b_pins: pinmux_ehrpwm0b_pins { + pinctrl-single,bits = < + /* EPWM0B */ + 0xc 0x00000020 0x000000f0 + >; + }; + ehrpwm1a_pins: pinmux_ehrpwm1a_pins { + pinctrl-single,bits = < + /* EPWM1A */ + 0x14 0x00000002 0x0000000f + >; + }; + ehrpwm1b_pins: pinmux_ehrpwm1b_pins { + pinctrl-single,bits = < + /* EPWM1B */ + 0x14 0x00000020 0x000000f0 + >; + }; + ecap0_pins: pinmux_ecap0_pins { + pinctrl-single,bits = < + /* ECAP0_APWM0 */ + 0x8 0x20000000 0xf0000000 + >; + }; + ecap1_pins: pinmux_ecap1_pins { + pinctrl-single,bits = < + /* ECAP1_APWM1 */ + 0x4 0x40000000 0xf0000000 + >; + }; + ecap2_pins: pinmux_ecap2_pins { + pinctrl-single,bits = < + /* ECAP2_APWM2 */ + 0x4 0x00000004 0x0000000f + >; + }; + spi1_pins: pinmux_spi_pins { + pinctrl-single,bits = < + /* SIMO, SOMI, CLK */ + 0x14 0x00110100 0x00ff0f00 + >; + }; + spi1_cs0_pin: pinmux_spi1_cs0 { + pinctrl-single,bits = < + /* CS0 */ + 0x14 0x00000010 0x000000f0 + >; + }; }; serial0: serial@1c42000 { compatible = "ns16550a"; @@ -107,6 +170,52 @@ reg = <0x21000 0x1000>; status = "disabled"; }; + mmc0: mmc@1c40000 { + compatible = "ti,da830-mmc"; + reg = <0x40000 0x1000>; + interrupts = <16>; + status = "disabled"; + }; + ehrpwm0: ehrpwm@01f00000 { + compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm"; + #pwm-cells = <3>; + reg = <0x300000 0x2000>; + status = "disabled"; + }; + ehrpwm1: ehrpwm@01f02000 { + compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm"; + #pwm-cells = <3>; + reg = <0x302000 0x2000>; + status = "disabled"; + }; + ecap0: ecap@01f06000 { + compatible = "ti,da850-ecap", "ti,am33xx-ecap"; + #pwm-cells = <3>; + reg = <0x306000 0x80>; + status = "disabled"; + }; + ecap1: ecap@01f07000 { + compatible = "ti,da850-ecap", "ti,am33xx-ecap"; + #pwm-cells = <3>; + reg = <0x307000 0x80>; + status = "disabled"; + }; + ecap2: ecap@01f08000 { + compatible = "ti,da850-ecap", "ti,am33xx-ecap"; + #pwm-cells = <3>; + reg = <0x308000 0x80>; + status = "disabled"; + }; + spi1: spi@1f0e000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "ti,da830-spi"; + reg = <0x30e000 0x1000>; + num-cs = <4>; + ti,davinci-spi-intr-line = <1>; + interrupts = <56>; + status = "disabled"; + }; }; nand_cs3@62000000 { compatible = "ti,davinci-nand"; diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi index aaa63d0a8096..b6bc4ff17f26 100644 --- a/arch/arm/boot/dts/dbx5x0.dtsi +++ b/arch/arm/boot/dts/dbx5x0.dtsi @@ -191,7 +191,7 @@ prcmu: prcmu@80157000 { compatible = "stericsson,db8500-prcmu"; - reg = <0x80157000 0x1000>, <0x801b0000 0x8000>, <0x801b8000 0x1000>; + reg = <0x80157000 0x2000>, <0x801b0000 0x8000>, <0x801b8000 0x1000>; reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm"; interrupts = <0 47 0x4>; #address-cells = <1>; @@ -674,10 +674,13 @@ compatible = "regulator-gpio"; regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2600000>; + regulator-max-microvolt = <2900000>; regulator-name = "mmci-reg"; regulator-type = "voltage"; + startup-delay-us = <100>; + enable-active-high; + states = <1800000 0x1 2900000 0x0>; diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index f7509cafc377..6cab46849cdb 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -50,6 +50,11 @@ #clock-cells = <1>; }; + thermal: thermal@d001c { + compatible = "marvell,dove-thermal"; + reg = <0xd001c 0x0c>, <0xd005c 0x08>; + }; + uart0: serial@12000 { compatible = "ns16550a"; reg = <0x12000 0x100>; diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index 1a62bcf18aa3..359694c78918 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -38,6 +38,11 @@ i2c7 = &i2c_7; }; + chipid@10000000 { + compatible = "samsung,exynos4210-chipid"; + reg = <0x10000000 0x100>; + }; + pd_mfc: mfc-power-domain@10023C40 { compatible = "samsung,exynos4210-pd"; reg = <0x10023C40 0x20>; @@ -82,10 +87,17 @@ reg = <0x10440000 0x1000>; }; + sys_reg: sysreg { + compatible = "samsung,exynos4-sysreg", "syscon"; + reg = <0x10010000 0x400>; + }; + watchdog@10060000 { compatible = "samsung,s3c2410-wdt"; reg = <0x10060000 0x100>; interrupts = <0 43 0>; + clocks = <&clock 345>; + clock-names = "watchdog"; status = "disabled"; }; @@ -93,6 +105,8 @@ compatible = "samsung,s3c6410-rtc"; reg = <0x10070000 0x100>; interrupts = <0 44 0>, <0 45 0>; + clocks = <&clock 346>; + clock-names = "rtc"; status = "disabled"; }; @@ -100,6 +114,8 @@ compatible = "samsung,s5pv210-keypad"; reg = <0x100A0000 0x100>; interrupts = <0 109 0>; + clocks = <&clock 347>; + clock-names = "keypad"; status = "disabled"; }; @@ -107,6 +123,8 @@ compatible = "samsung,exynos4210-sdhci"; reg = <0x12510000 0x100>; interrupts = <0 73 0>; + clocks = <&clock 297>, <&clock 145>; + clock-names = "hsmmc", "mmc_busclk.2"; status = "disabled"; }; @@ -114,6 +132,8 @@ compatible = "samsung,exynos4210-sdhci"; reg = <0x12520000 0x100>; interrupts = <0 74 0>; + clocks = <&clock 298>, <&clock 146>; + clock-names = "hsmmc", "mmc_busclk.2"; status = "disabled"; }; @@ -121,6 +141,8 @@ compatible = "samsung,exynos4210-sdhci"; reg = <0x12530000 0x100>; interrupts = <0 75 0>; + clocks = <&clock 299>, <&clock 147>; + clock-names = "hsmmc", "mmc_busclk.2"; status = "disabled"; }; @@ -128,6 +150,16 @@ compatible = "samsung,exynos4210-sdhci"; reg = <0x12540000 0x100>; interrupts = <0 76 0>; + clocks = <&clock 300>, <&clock 148>; + clock-names = "hsmmc", "mmc_busclk.2"; + status = "disabled"; + }; + + mfc: codec@13400000 { + compatible = "samsung,mfc-v5"; + reg = <0x13400000 0x10000>; + interrupts = <0 94 0>; + samsung,power-domain = <&pd_mfc>; status = "disabled"; }; @@ -135,6 +167,8 @@ compatible = "samsung,exynos4210-uart"; reg = <0x13800000 0x100>; interrupts = <0 52 0>; + clocks = <&clock 312>, <&clock 151>; + clock-names = "uart", "clk_uart_baud0"; status = "disabled"; }; @@ -142,6 +176,8 @@ compatible = "samsung,exynos4210-uart"; reg = <0x13810000 0x100>; interrupts = <0 53 0>; + clocks = <&clock 313>, <&clock 152>; + clock-names = "uart", "clk_uart_baud0"; status = "disabled"; }; @@ -149,6 +185,8 @@ compatible = "samsung,exynos4210-uart"; reg = <0x13820000 0x100>; interrupts = <0 54 0>; + clocks = <&clock 314>, <&clock 153>; + clock-names = "uart", "clk_uart_baud0"; status = "disabled"; }; @@ -156,6 +194,8 @@ compatible = "samsung,exynos4210-uart"; reg = <0x13830000 0x100>; interrupts = <0 55 0>; + clocks = <&clock 315>, <&clock 154>; + clock-names = "uart", "clk_uart_baud0"; status = "disabled"; }; @@ -165,6 +205,10 @@ compatible = "samsung,s3c2440-i2c"; reg = <0x13860000 0x100>; interrupts = <0 58 0>; + clocks = <&clock 317>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_bus>; status = "disabled"; }; @@ -174,6 +218,10 @@ compatible = "samsung,s3c2440-i2c"; reg = <0x13870000 0x100>; interrupts = <0 59 0>; + clocks = <&clock 318>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_bus>; status = "disabled"; }; @@ -183,6 +231,8 @@ compatible = "samsung,s3c2440-i2c"; reg = <0x13880000 0x100>; interrupts = <0 60 0>; + clocks = <&clock 319>; + clock-names = "i2c"; status = "disabled"; }; @@ -192,6 +242,8 @@ compatible = "samsung,s3c2440-i2c"; reg = <0x13890000 0x100>; interrupts = <0 61 0>; + clocks = <&clock 320>; + clock-names = "i2c"; status = "disabled"; }; @@ -201,6 +253,8 @@ compatible = "samsung,s3c2440-i2c"; reg = <0x138A0000 0x100>; interrupts = <0 62 0>; + clocks = <&clock 321>; + clock-names = "i2c"; status = "disabled"; }; @@ -210,6 +264,8 @@ compatible = "samsung,s3c2440-i2c"; reg = <0x138B0000 0x100>; interrupts = <0 63 0>; + clocks = <&clock 322>; + clock-names = "i2c"; status = "disabled"; }; @@ -219,6 +275,8 @@ compatible = "samsung,s3c2440-i2c"; reg = <0x138C0000 0x100>; interrupts = <0 64 0>; + clocks = <&clock 323>; + clock-names = "i2c"; status = "disabled"; }; @@ -228,6 +286,8 @@ compatible = "samsung,s3c2440-i2c"; reg = <0x138D0000 0x100>; interrupts = <0 65 0>; + clocks = <&clock 324>; + clock-names = "i2c"; status = "disabled"; }; @@ -239,6 +299,10 @@ rx-dma-channel = <&pdma0 6>; /* preliminary */ #address-cells = <1>; #size-cells = <0>; + clocks = <&clock 327>, <&clock 159>; + clock-names = "spi", "spi_busclk0"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_bus>; status = "disabled"; }; @@ -250,6 +314,10 @@ rx-dma-channel = <&pdma1 6>; /* preliminary */ #address-cells = <1>; #size-cells = <0>; + clocks = <&clock 328>, <&clock 160>; + clock-names = "spi", "spi_busclk0"; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_bus>; status = "disabled"; }; @@ -261,6 +329,18 @@ rx-dma-channel = <&pdma0 8>; /* preliminary */ #address-cells = <1>; #size-cells = <0>; + clocks = <&clock 329>, <&clock 161>; + clock-names = "spi", "spi_busclk0"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_bus>; + status = "disabled"; + }; + + pwm@139D0000 { + compatible = "samsung,exynos4210-pwm"; + reg = <0x139D0000 0x1000>; + interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>, <0 41 0>; + #pwm-cells = <2>; status = "disabled"; }; @@ -275,6 +355,8 @@ compatible = "arm,pl330", "arm,primecell"; reg = <0x12680000 0x1000>; interrupts = <0 35 0>; + clocks = <&clock 292>; + clock-names = "apb_pclk"; #dma-cells = <1>; #dma-channels = <8>; #dma-requests = <32>; @@ -284,6 +366,8 @@ compatible = "arm,pl330", "arm,primecell"; reg = <0x12690000 0x1000>; interrupts = <0 36 0>; + clocks = <&clock 293>; + clock-names = "apb_pclk"; #dma-cells = <1>; #dma-channels = <8>; #dma-requests = <32>; @@ -293,9 +377,23 @@ compatible = "arm,pl330", "arm,primecell"; reg = <0x12850000 0x1000>; interrupts = <0 34 0>; + clocks = <&clock 279>; + clock-names = "apb_pclk"; #dma-cells = <1>; #dma-channels = <8>; #dma-requests = <1>; }; }; + + fimd: fimd@11c00000 { + compatible = "samsung,exynos4210-fimd"; + interrupt-parent = <&combiner>; + reg = <0x11c00000 0x20000>; + interrupt-names = "fifo", "vsync", "lcd_sys"; + interrupts = <11 0>, <11 1>, <11 2>; + clocks = <&clock 140>, <&clock 283>; + clock-names = "sclk_fimd", "fimd"; + samsung,power-domain = <&pd_lcd0>; + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index f2710018e84e..524b90846df5 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -57,6 +57,16 @@ status = "okay"; }; + g2d@12800000 { + status = "okay"; + }; + + codec@13400000 { + samsung,mfc-r = <0x43000000 0x800000>; + samsung,mfc-l = <0x51000000 0x800000>; + status = "okay"; + }; + serial@13800000 { status = "okay"; }; @@ -121,4 +131,16 @@ linux,default-trigger = "heartbeat"; }; }; + + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti"; + clock-frequency = <0>; + }; + + xusbxti { + compatible = "samsung,clock-xusbxti"; + clock-frequency = <24000000>; + }; + }; }; diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts index f63490707f3a..91332b72acf5 100644 --- a/arch/arm/boot/dts/exynos4210-smdkv310.dts +++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts @@ -30,16 +30,19 @@ }; sdhci@12530000 { - samsung,sdhci-bus-width = <4>; - linux,mmc_cap_4_bit_data; - samsung,sdhci-cd-internal; - gpio-cd = <&gpk2 2 2 3 3>; - gpios = <&gpk2 0 2 0 3>, - <&gpk2 1 2 0 3>, - <&gpk2 3 2 3 3>, - <&gpk2 4 2 3 3>, - <&gpk2 5 2 3 3>, - <&gpk2 6 2 3 3>; + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; + status = "okay"; + }; + + g2d@12800000 { + status = "okay"; + }; + + codec@13400000 { + samsung,mfc-r = <0x43000000 0x800000>; + samsung,mfc-l = <0x51000000 0x800000>; status = "okay"; }; @@ -59,25 +62,32 @@ status = "okay"; }; + pinctrl@11000000 { + keypad_rows: keypad-rows { + samsung,pins = "gpx2-0", "gpx2-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + keypad_cols: keypad-cols { + samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3", + "gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + }; + keypad@100A0000 { samsung,keypad-num-rows = <2>; samsung,keypad-num-columns = <8>; linux,keypad-no-autorepeat; linux,keypad-wakeup; + pinctrl-names = "default"; + pinctrl-0 = <&keypad_rows &keypad_cols>; status = "okay"; - row-gpios = <&gpx2 0 3 3 0>, - <&gpx2 1 3 3 0>; - - col-gpios = <&gpx1 0 3 0 0>, - <&gpx1 1 3 0 0>, - <&gpx1 2 3 0 0>, - <&gpx1 3 3 0 0>, - <&gpx1 4 3 0 0>, - <&gpx1 5 3 0 0>, - <&gpx1 6 3 0 0>, - <&gpx1 7 3 0 0>; - key_1 { keypad,row = <0>; keypad,column = <3>; @@ -143,9 +153,7 @@ #address-cells = <1>; #size-cells = <0>; samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <20000>; - gpios = <&gpd1 0 2 3 0>, - <&gpd1 1 2 3 0>; + samsung,i2c-max-bus-freq = <100000>; status = "okay"; eeprom@50 { @@ -160,9 +168,6 @@ }; spi_2: spi@13940000 { - gpios = <&gpc1 1 5 3 0>, - <&gpc1 3 5 3 0>, - <&gpc1 4 5 3 0>; status = "okay"; w25x80@0 { @@ -173,7 +178,7 @@ spi-max-frequency = <1000000>; controller-data { - cs-gpio = <&gpc1 2 1 0 3>; + cs-gpio = <&gpc1 2 0>; samsung,spi-feedback-delay = <0>; }; @@ -189,4 +194,16 @@ }; }; }; + + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti"; + clock-frequency = <12000000>; + }; + + xusbxti { + compatible = "samsung,clock-xusbxti"; + clock-frequency = <24000000>; + }; + }; }; diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index c346b64dff55..9a14484c7bb1 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -289,4 +289,16 @@ }; }; }; + + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti"; + clock-frequency = <0>; + }; + + xusbxti { + compatible = "samsung,clock-xusbxti"; + clock-frequency = <24000000>; + }; + }; }; diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts new file mode 100644 index 000000000000..345cdb51dcb7 --- /dev/null +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -0,0 +1,352 @@ +/* + * Samsung's Exynos4210 based Universal C210 board device tree source + * + * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Device tree source file for Samsung's Universal C210 board which is based on + * Samsung's Exynos4210 rev0 SoC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +/include/ "exynos4210.dtsi" + +/ { + model = "Samsung Universal C210 based on Exynos4210 rev0"; + compatible = "samsung,universal_c210", "samsung,exynos4210"; + + memory { + reg = <0x40000000 0x10000000 + 0x50000000 0x10000000>; + }; + + chosen { + bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rw rootwait earlyprintk panic=5 maxcpus=1"; + }; + + mct@10050000 { + compatible = "none"; + }; + + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti"; + clock-frequency = <0>; + }; + + xusbxti { + compatible = "samsung,clock-xusbxti"; + clock-frequency = <24000000>; + }; + }; + + vemmc_reg: voltage-regulator { + compatible = "regulator-fixed"; + regulator-name = "VMEM_VDD_2_8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpe1 3 0>; + enable-active-high; + }; + + sdhci_emmc: sdhci@12510000 { + bus-width = <8>; + non-removable; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>; + pinctrl-names = "default"; + vmmc-supply = <&vemmc_reg>; + status = "okay"; + }; + + serial@13800000 { + status = "okay"; + }; + + serial@13810000 { + status = "okay"; + }; + + serial@13820000 { + status = "okay"; + }; + + serial@13830000 { + status = "okay"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + vol-up-key { + gpios = <&gpx2 0 1>; + linux,code = <115>; + label = "volume up"; + debounce-interval = <1>; + }; + + vol-down-key { + gpios = <&gpx2 1 1>; + linux,code = <114>; + label = "volume down"; + debounce-interval = <1>; + }; + + config-key { + gpios = <&gpx2 2 1>; + linux,code = <171>; + label = "config"; + debounce-interval = <1>; + gpio-key,wakeup; + }; + + camera-key { + gpios = <&gpx2 3 1>; + linux,code = <212>; + label = "camera"; + debounce-interval = <1>; + }; + + power-key { + gpios = <&gpx2 7 1>; + linux,code = <116>; + label = "power"; + debounce-interval = <1>; + gpio-key,wakeup; + }; + + ok-key { + gpios = <&gpx3 5 1>; + linux,code = <352>; + label = "ok"; + debounce-interval = <1>; + }; + }; + + tsp_reg: voltage-regulator { + compatible = "regulator-fixed"; + regulator-name = "TSP_2_8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpe2 3 0>; + enable-active-high; + }; + + i2c@13890000 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <100000>; + pinctrl-0 = <&i2c3_bus>; + pinctrl-names = "default"; + status = "okay"; + + tsp@4a { + /* TBD: Atmel maXtouch touchscreen */ + reg = <0x4a>; + }; + }; + + i2c@138B0000 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <100000>; + pinctrl-0 = <&i2c5_bus>; + pinctrl-names = "default"; + status = "okay"; + + vdd_arm_reg: pmic@60 { + compatible = "maxim,max8952"; + reg = <0x60>; + + max8952,vid-gpios = <&gpx0 3 0>, <&gpx0 4 0>; + max8952,default-mode = <0>; + max8952,dvs-mode-microvolt = <1250000>, <1200000>, + <1050000>, <950000>; + max8952,sync-freq = <0>; + max8952,ramp-speed = <0>; + + regulator-name = "vdd_arm"; + regulator-min-microvolt = <770000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; + + pmic@66 { + compatible = "national,lp3974"; + reg = <0x66>; + + max8998,pmic-buck1-default-dvs-idx = <0>; + max8998,pmic-buck1-dvs-gpios = <&gpx0 5 0>, + <&gpx0 6 0>; + max8998,pmic-buck1-dvs-voltage = <1100000>, <1000000>, + <1100000>, <1000000>; + + max8998,pmic-buck2-default-dvs-idx = <0>; + max8998,pmic-buck2-dvs-gpio = <&gpe2 0 0>; + max8998,pmic-buck2-dvs-voltage = <1200000>, <1100000>; + + regulators { + ldo2_reg: LDO2 { + regulator-name = "VALIVE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "VUSB+MIPI_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + ldo4_reg: LDO4 { + regulator-name = "VADC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo5_reg: LDO5 { + regulator-name = "VTF_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo6_reg: LDO6 { + regulator-name = "LDO6"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + }; + + ldo7_reg: LDO7 { + regulator-name = "VLCD+VMIPI_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo8_reg: LDO8 { + regulator-name = "VUSB+VDAC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo9_reg: LDO9 { + regulator-name = "VCC_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo10_reg: LDO10 { + regulator-name = "VPLL_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo11_reg: LDO11 { + regulator-name = "CAM_AF_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo12_reg: LDO12 { + regulator-name = "PS_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo13_reg: LDO13 { + regulator-name = "VHIC_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo14_reg: LDO14 { + regulator-name = "CAM_I_HOST_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo15_reg: LDO15 { + regulator-name = "CAM_S_DIG+FM33_CORE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo16_reg: LDO16 { + regulator-name = "CAM_S_ANA_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo17_reg: LDO17 { + regulator-name = "VCC_3.0V_LCD"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + buck1_reg: BUCK1 { + regulator-name = "VINT_1.1V"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "VG3D_1.1V"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + }; + + buck3_reg: BUCK3 { + regulator-name = "VCC_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "VMEM_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + ap32khz_reg: EN32KHz-AP { + regulator-name = "32KHz AP"; + regulator-always-on; + }; + + cp32khz_reg: EN32KHz-CP { + regulator-name = "32KHz CP"; + }; + + vichg_reg: ENVICHG { + regulator-name = "VICHG"; + }; + + safeout1_reg: ESAFEOUT1 { + regulator-name = "SAFEOUT1"; + regulator-always-on; + }; + + safeout2_reg: ESAFEOUT2 { + regulator-name = "SAFEOUT2"; + regulator-boot-on; + }; + }; + }; + }; + + pwm@139D0000 { + compatible = "samsung,s5p6440-pwm"; + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index 2feffc70814c..54710de82908 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -41,12 +41,49 @@ }; combiner:interrupt-controller@10440000 { + samsung,combiner-nr = <16>; interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>; }; + mct@10050000 { + compatible = "samsung,exynos4210-mct"; + reg = <0x10050000 0x800>; + interrupt-controller; + #interrups-cells = <2>; + interrupt-parent = <&mct_map>; + interrupts = <0 0>, <1 0>, <2 0>, <3 0>, + <4 0>, <5 0>; + clocks = <&clock 3>, <&clock 344>; + clock-names = "fin_pll", "mct"; + + mct_map: mct-map { + #interrupt-cells = <2>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = <0x0 0 &gic 0 57 0>, + <0x1 0 &gic 0 69 0>, + <0x2 0 &combiner 12 6>, + <0x3 0 &combiner 12 7>, + <0x4 0 &gic 0 42 0>, + <0x5 0 &gic 0 48 0>; + }; + }; + + clock: clock-controller@0x10030000 { + compatible = "samsung,exynos4210-clock"; + reg = <0x10030000 0x20000>; + #clock-cells = <1>; + }; + + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupt-parent = <&combiner>; + interrupts = <2 2>, <3 2>; + }; + pinctrl_0: pinctrl@11400000 { compatible = "samsung,exynos4210-pinctrl"; reg = <0x11400000 0x1000>; @@ -76,4 +113,11 @@ reg = <0x100C0000 0x100>; interrupts = <2 4>; }; + + g2d@12800000 { + compatible = "samsung,s5pv210-g2d"; + reg = <0x12800000 0x1000>; + interrupts = <0 89 0>; + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/exynos4212.dtsi b/arch/arm/boot/dts/exynos4212.dtsi index c6ae2005961f..c0f60f49cea6 100644 --- a/arch/arm/boot/dts/exynos4212.dtsi +++ b/arch/arm/boot/dts/exynos4212.dtsi @@ -25,4 +25,35 @@ gic:interrupt-controller@10490000 { cpu-offset = <0x8000>; }; + + interrupt-controller@10440000 { + samsung,combiner-nr = <18>; + interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, + <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, + <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, + <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>, + <0 107 0>, <0 108 0>; + }; + + mct@10050000 { + compatible = "samsung,exynos4412-mct"; + reg = <0x10050000 0x800>; + interrupt-controller; + #interrups-cells = <2>; + interrupt-parent = <&mct_map>; + interrupts = <0 0>, <1 0>, <2 0>, <3 0>, + <4 0>, <5 0>; + + mct_map: mct-map { + #interrupt-cells = <2>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = <0x0 0 &gic 0 57 0>, + <0x1 0 &combiner 12 5>, + <0x2 0 &combiner 12 6>, + <0x3 0 &combiner 12 7>, + <0x4 0 &gic 1 12 0>, + <0x5 0 &gic 1 12 0>; + }; + }; }; diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts new file mode 100644 index 000000000000..53bc8bf77984 --- /dev/null +++ b/arch/arm/boot/dts/exynos4412-odroidx.dts @@ -0,0 +1,111 @@ +/* + * Hardkernel's Exynos4412 based ODROID-X board device tree source + * + * Copyright (c) 2012 Dongjin Kim <tobetter@gmail.com> + * + * Device tree source file for Hardkernel's ODROID-X board which is based on + * Samsung's Exynos4412 SoC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +/include/ "exynos4412.dtsi" + +/ { + model = "Hardkernel ODROID-X board based on Exynos4412"; + compatible = "hardkernel,odroid-x", "samsung,exynos4412"; + + memory { + reg = <0x40000000 0x40000000>; + }; + + leds { + compatible = "gpio-leds"; + led1 { + label = "led1:heart"; + gpios = <&gpc1 0 1>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + led2 { + label = "led2:mmc0"; + gpios = <&gpc1 2 1>; + default-state = "on"; + linux,default-trigger = "mmc0"; + }; + }; + + mshc@12550000 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; + pinctrl-names = "default"; + status = "okay"; + + num-slots = <1>; + supports-highspeed; + broken-cd; + fifo-depth = <0x80>; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + + slot@0 { + reg = <0>; + bus-width = <8>; + }; + }; + + regulator_p3v3 { + compatible = "regulator-fixed"; + regulator-name = "p3v3_en"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpa1 1 1>; + enable-active-high; + regulator-boot-on; + }; + + rtc@10070000 { + status = "okay"; + }; + + sdhci@12530000 { + bus-width = <4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; + pinctrl-names = "default"; + status = "okay"; + }; + + serial@13800000 { + status = "okay"; + }; + + serial@13810000 { + status = "okay"; + }; + + serial@13820000 { + status = "okay"; + }; + + serial@13830000 { + status = "okay"; + }; + + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti"; + clock-frequency = <0>; + }; + + xusbxti { + compatible = "samsung,clock-xusbxti"; + clock-frequency = <24000000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts new file mode 100644 index 000000000000..1c21bad32ca9 --- /dev/null +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -0,0 +1,453 @@ +/* + * Insignal's Exynos4412 based Origen board device tree source + * + * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Device tree source file for Insignal's Origen board which is based on + * Samsung's Exynos4412 SoC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +/include/ "exynos4412.dtsi" + +/ { + model = "Insignal Origen evaluation board based on Exynos4412"; + compatible = "insignal,origen4412", "samsung,exynos4412"; + + memory { + reg = <0x40000000 0x40000000>; + }; + + chosen { + bootargs ="console=ttySAC2,115200"; + }; + + mmc_reg: voltage-regulator { + compatible = "regulator-fixed"; + regulator-name = "VMEM_VDD_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpx1 1 0>; + enable-active-high; + }; + + sdhci@12530000 { + bus-width = <4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>; + pinctrl-names = "default"; + vmmc-supply = <&mmc_reg>; + status = "okay"; + }; + + mshc@12550000 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; + pinctrl-names = "default"; + status = "okay"; + + num-slots = <1>; + supports-highspeed; + broken-cd; + fifo-depth = <0x80>; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + + slot@0 { + reg = <0>; + bus-width = <8>; + }; + }; + + codec@13400000 { + samsung,mfc-r = <0x43000000 0x800000>; + samsung,mfc-l = <0x51000000 0x800000>; + status = "okay"; + }; + + fimd@11c00000 { + pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>; + pinctrl-names = "default"; + status = "okay"; + }; + + display-timings { + native-mode = <&timing0>; + timing0: timing { + clock-frequency = <50000>; + hactive = <1024>; + vactive = <600>; + hfront-porch = <64>; + hback-porch = <16>; + hsync-len = <48>; + vback-porch = <64>; + vfront-porch = <16>; + vsync-len = <3>; + }; + }; + + serial@13800000 { + status = "okay"; + }; + + serial@13810000 { + status = "okay"; + }; + + serial@13820000 { + status = "okay"; + }; + + serial@13830000 { + status = "okay"; + }; + + i2c@13860000 { + #address-cells = <1>; + #size-cells = <0>; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <20000>; + pinctrl-0 = <&i2c0_bus>; + pinctrl-names = "default"; + status = "okay"; + + s5m8767_pmic@66 { + compatible = "samsung,s5m8767-pmic"; + reg = <0x66>; + + s5m8767,pmic-buck-default-dvs-idx = <3>; + + s5m8767,pmic-buck-dvs-gpios = <&gpx2 3 0>, + <&gpx2 4 0>, + <&gpx2 5 0>; + + s5m8767,pmic-buck-ds-gpios = <&gpm3 5 0>, + <&gpm3 6 0>, + <&gpm3 7 0>; + + s5m8767,pmic-buck2-dvs-voltage = <1250000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>; + + s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>, + <1100000>, <1100000>, + <1100000>, <1100000>, + <1100000>, <1100000>; + + s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>; + + regulators { + ldo1_reg: LDO1 { + regulator-name = "VDD_ALIVE"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo2_reg: LDO2 { + regulator-name = "VDDQ_M12"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo3_reg: LDO3 { + regulator-name = "VDDIOAP_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo4_reg: LDO4 { + regulator-name = "VDDQ_PRE"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo5_reg: LDO5 { + regulator-name = "VDD18_2M"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo6_reg: LDO6 { + regulator-name = "VDD10_MPLL"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo7_reg: LDO7 { + regulator-name = "VDD10_XPLL"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo8_reg: LDO8 { + regulator-name = "VDD10_MIPI"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo9_reg: LDO9 { + regulator-name = "VDD33_LCD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo10_reg: LDO10 { + regulator-name = "VDD18_MIPI"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo11_reg: LDO11 { + regulator-name = "VDD18_ABB1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo12_reg: LDO12 { + regulator-name = "VDD33_UOTG"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo13_reg: LDO13 { + regulator-name = "VDDIOPERI_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo14_reg: LDO14 { + regulator-name = "VDD18_ABB02"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo15_reg: LDO15 { + regulator-name = "VDD10_USH"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo16_reg: LDO16 { + regulator-name = "VDD18_HSIC"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo17_reg: LDO17 { + regulator-name = "VDDIOAP_MMC012_28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo18_reg: LDO18 { + regulator-name = "VDDIOPERI_28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo19_reg: LDO19 { + regulator-name = "DVDD25"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo20_reg: LDO20 { + regulator-name = "VDD28_CAM"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo21_reg: LDO21 { + regulator-name = "VDD28_AF"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo22_reg: LDO22 { + regulator-name = "VDDA28_2M"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo23_reg: LDO23 { + regulator-name = "VDD28_TF"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo24_reg: LDO24 { + regulator-name = "VDD33_A31"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo25_reg: LDO25 { + regulator-name = "VDD18_CAM"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo26_reg: LDO26 { + regulator-name = "VDD18_A31"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo27_reg: LDO27 { + regulator-name = "GPS_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo28_reg: LDO28 { + regulator-name = "DVDD12"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + buck3_reg: BUCK3 { + regulator-name = "vdd_int"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + buck4_reg: BUCK4 { + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + buck5_reg: BUCK5 { + regulator-name = "vdd_m12"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + buck6_reg: BUCK6 { + regulator-name = "vdd12_5m"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + buck9_reg: BUCK9 { + regulator-name = "vddf28_emmc"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + }; + }; + }; + + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti"; + clock-frequency = <0>; + }; + + xusbxti { + compatible = "samsung,clock-xusbxti"; + clock-frequency = <24000000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts index f05bf575cc45..dd564310d4a5 100644 --- a/arch/arm/boot/dts/exynos4412-smdk4412.dts +++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts @@ -27,6 +27,27 @@ bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc"; }; + g2d@10800000 { + status = "okay"; + }; + + g2d@10800000 { + status = "okay"; + }; + + sdhci@12530000 { + bus-width = <4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>; + pinctrl-names = "default"; + status = "okay"; + }; + + codec@13400000 { + samsung,mfc-r = <0x43000000 0x800000>; + samsung,mfc-l = <0x51000000 0x800000>; + status = "okay"; + }; + serial@13800000 { status = "okay"; }; @@ -42,4 +63,16 @@ serial@13830000 { status = "okay"; }; + + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti"; + clock-frequency = <0>; + }; + + xusbxti { + compatible = "samsung,clock-xusbxti"; + clock-frequency = <24000000>; + }; + }; }; diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index d7dfe312772a..270b389e0a1b 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -25,4 +25,47 @@ gic:interrupt-controller@10490000 { cpu-offset = <0x4000>; }; + + interrupt-controller@10440000 { + samsung,combiner-nr = <20>; + interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, + <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, + <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, + <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>, + <0 107 0>, <0 108 0>, <0 48 0>, <0 42 0>; + }; + + mct@10050000 { + compatible = "samsung,exynos4412-mct"; + reg = <0x10050000 0x800>; + interrupt-controller; + #interrups-cells = <2>; + interrupt-parent = <&mct_map>; + interrupts = <0 0>, <1 0>, <2 0>, <3 0>, + <4 0>, <5 0>, <6 0>, <7 0>; + clocks = <&clock 3>, <&clock 344>; + clock-names = "fin_pll", "mct"; + + mct_map: mct-map { + #interrupt-cells = <2>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = <0x0 0 &gic 0 57 0>, + <0x1 0 &combiner 12 5>, + <0x2 0 &combiner 12 6>, + <0x3 0 &combiner 12 7>, + <0x4 0 &gic 1 12 0>, + <0x5 0 &gic 1 12 0>, + <0x6 0 &gic 1 12 0>, + <0x7 0 &gic 1 12 0>; + }; + }; + + mshc@12550000 { + compatible = "samsung,exynos4412-dw-mshc"; + reg = <0x12550000 0x1000>; + interrupts = <0 77 0>; + #address-cells = <1>; + #size-cells = <0>; + }; }; diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi index 9a8780694909..e3380a7a285c 100644 --- a/arch/arm/boot/dts/exynos4x12.dtsi +++ b/arch/arm/boot/dts/exynos4x12.dtsi @@ -36,6 +36,12 @@ <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>; }; + clock: clock-controller@0x10030000 { + compatible = "samsung,exynos4412-clock"; + reg = <0x10030000 0x20000>; + #clock-cells = <1>; + }; + pinctrl_0: pinctrl@11400000 { compatible = "samsung,exynos4x12-pinctrl"; reg = <0x11400000 0x1000>; @@ -66,4 +72,11 @@ reg = <0x106E0000 0x1000>; interrupts = <0 72 0>; }; + + g2d@10800000 { + compatible = "samsung,exynos4212-g2d"; + reg = <0x10800000 0x1000>; + interrupts = <0 89 0>; + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts new file mode 100644 index 000000000000..02cfc76d002f --- /dev/null +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -0,0 +1,452 @@ +/* + * Samsung's Exynos5250 based Arndale board device tree source + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +/include/ "exynos5250.dtsi" + +/ { + model = "Insignal Arndale evaluation board based on EXYNOS5250"; + compatible = "insignal,arndale", "samsung,exynos5250"; + + memory { + reg = <0x40000000 0x80000000>; + }; + + chosen { + bootargs = "console=ttySAC2,115200"; + }; + + codec@11000000 { + samsung,mfc-r = <0x43000000 0x800000>; + samsung,mfc-l = <0x51000000 0x800000>; + }; + + i2c@12C60000 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <20000>; + samsung,i2c-slave-addr = <0x66>; + + s5m8767_pmic@66 { + compatible = "samsung,s5m8767-pmic"; + reg = <0x66>; + + s5m8767,pmic-buck2-dvs-voltage = <1300000>; + s5m8767,pmic-buck3-dvs-voltage = <1100000>; + s5m8767,pmic-buck4-dvs-voltage = <1200000>; + s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 0>, + <&gpd1 1 0>, + <&gpd1 2 0>; + s5m8767,pmic-buck-ds-gpios = <&gpx2 3 0>, + <&gpx2 4 0>, + <&gpx2 5 0>; + regulators { + ldo1_reg: LDO1 { + regulator-name = "VDD_ALIVE_1.0V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo2_reg: LDO2 { + regulator-name = "VDD_28IO_DP_1.35V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo3_reg: LDO3 { + regulator-name = "VDD_COMMON1_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo4_reg: LDO4 { + regulator-name = "VDD_IOPERI_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + op_mode = <1>; + }; + + ldo5_reg: LDO5 { + regulator-name = "VDD_EXT_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo6_reg: LDO6 { + regulator-name = "VDD_MPLL_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo7_reg: LDO7 { + regulator-name = "VDD_XPLL_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo8_reg: LDO8 { + regulator-name = "VDD_COMMON2_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo9_reg: LDO9 { + regulator-name = "VDD_33ON_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + op_mode = <1>; + }; + + ldo10_reg: LDO10 { + regulator-name = "VDD_COMMON3_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo11_reg: LDO11 { + regulator-name = "VDD_ABB2_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo12_reg: LDO12 { + regulator-name = "VDD_USB_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo13_reg: LDO13 { + regulator-name = "VDDQ_C2C_W_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo14_reg: LDO14 { + regulator-name = "VDD18_ABB0_3_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo15_reg: LDO15 { + regulator-name = "VDD10_COMMON4_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo16_reg: LDO16 { + regulator-name = "VDD18_HSIC_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo17_reg: LDO17 { + regulator-name = "VDDQ_MMC2_3_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo18_reg: LDO18 { + regulator-name = "VDD_33ON_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + op_mode = <1>; + }; + + ldo22_reg: LDO22 { + regulator-name = "EXT_33_OFF"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + op_mode = <1>; + }; + + ldo23_reg: LDO23 { + regulator-name = "EXT_28_OFF"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + op_mode = <1>; + }; + + ldo25_reg: LDO25 { + regulator-name = "PVDD_LDO25"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + op_mode = <1>; + }; + + ldo26_reg: LDO26 { + regulator-name = "EXT_18_OFF"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + op_mode = <1>; + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + buck3_reg: BUCK3 { + regulator-name = "vdd_int"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + buck4_reg: BUCK4 { + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + op_mode = <1>; + }; + + buck5_reg: BUCK5 { + regulator-name = "VDD_MEM_1.35V"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1355000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + buck9_reg: BUCK9 { + regulator-name = "VDD_33_OFF_EXT1"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3000000>; + op_mode = <1>; + }; + }; + }; + }; + + i2c@12C70000 { + status = "disabled"; + }; + + i2c@12C80000 { + status = "disabled"; + }; + + i2c@12C90000 { + status = "disabled"; + }; + + i2c@12CA0000 { + status = "disabled"; + }; + + i2c@12CB0000 { + status = "disabled"; + }; + + i2c@12CC0000 { + status = "disabled"; + }; + + i2c@12CD0000 { + status = "disabled"; + }; + + i2c@121D0000 { + status = "disabled"; + }; + + dwmmc_0: dwmmc0@12200000 { + num-slots = <1>; + supports-highspeed; + broken-cd; + fifo-depth = <0x80>; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + vmmc-supply = <&mmc_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; + + slot@0 { + reg = <0>; + bus-width = <8>; + }; + }; + + dwmmc_1: dwmmc1@12210000 { + status = "disabled"; + }; + + dwmmc_2: dwmmc2@12220000 { + num-slots = <1>; + supports-highspeed; + fifo-depth = <0x80>; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + vmmc-supply = <&mmc_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; + + slot@0 { + reg = <0>; + bus-width = <4>; + disable-wp; + }; + }; + + dwmmc_3: dwmmc3@12230000 { + status = "disabled"; + }; + + spi_0: spi@12d20000 { + status = "disabled"; + }; + + spi_1: spi@12d30000 { + status = "disabled"; + }; + + spi_2: spi@12d40000 { + status = "disabled"; + }; + + gpio_keys { + compatible = "gpio-keys"; + + menu { + label = "SW-TACT2"; + gpios = <&gpx1 4 1>; + linux,code = <139>; + gpio-key,wakeup; + }; + + home { + label = "SW-TACT3"; + gpios = <&gpx1 5 1>; + linux,code = <102>; + gpio-key,wakeup; + }; + + up { + label = "SW-TACT4"; + gpios = <&gpx1 6 1>; + linux,code = <103>; + gpio-key,wakeup; + }; + + down { + label = "SW-TACT5"; + gpios = <&gpx1 7 1>; + linux,code = <108>; + gpio-key,wakeup; + }; + + back { + label = "SW-TACT6"; + gpios = <&gpx2 0 1>; + linux,code = <158>; + gpio-key,wakeup; + }; + + wakeup { + label = "SW-TACT7"; + gpios = <&gpx2 1 1>; + linux,code = <143>; + gpio-key,wakeup; + }; + }; + + hdmi { + hpd-gpio = <&gpx3 7 2>; + vdd_osc-supply = <&ldo10_reg>; + vdd_pll-supply = <&ldo8_reg>; + vdd-supply = <&ldo8_reg>; + }; + + mmc_reg: voltage-regulator { + compatible = "regulator-fixed"; + regulator-name = "VDD_33ON_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpx1 1 1>; + enable-active-high; + }; + + reg_hdmi_en: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "hdmi-en"; + }; + + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti"; + clock-frequency = <24000000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi new file mode 100644 index 000000000000..d1650fb34c0a --- /dev/null +++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi @@ -0,0 +1,783 @@ +/* + * Samsung's Exynos5250 SoC pin-mux and pin-config device tree source + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung's Exynos5250 SoC pin-mux and pin-config optiosn are listed as device + * tree nodes are listed in this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/ { + pinctrl@11400000 { + gpa0: gpa0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpa1: gpa1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpa2: gpa2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb0: gpb0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb1: gpb1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb2: gpb2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb3: gpb3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc0: gpc0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc1: gpc1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc2: gpc2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc3: gpc3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd0: gpd0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd1: gpd1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpy0: gpy0 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy1: gpy1 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy2: gpy2 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy3: gpy3 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy4: gpy4 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy5: gpy5 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy6: gpy6 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpc4: gpc4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx0: gpx0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&combiner>; + #interrupt-cells = <2>; + interrupts = <23 0>, <24 0>, <25 0>, <25 1>, + <26 0>, <26 1>, <27 0>, <27 1>; + }; + + gpx1: gpx1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&combiner>; + #interrupt-cells = <2>; + interrupts = <28 0>, <28 1>, <29 0>, <29 1>, + <30 0>, <30 1>, <31 0>, <31 1>; + }; + + gpx2: gpx2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx3: gpx3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + uart0_data: uart0-data { + samsung,pins = "gpa0-0", "gpa0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart0_fctl: uart0-fctl { + samsung,pins = "gpa0-2", "gpa0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samaung,pin-drv = <0>; + }; + + i2c2_bus: i2c2-bus { + samsung,pins = "gpa0-6", "gpa0-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samaung,pin-drv = <0>; + }; + + i2c2_hs_bus: i2c2-hs-bus { + samsung,pins = "gpa0-6", "gpa0-7"; + samsung,pin-function = <4>; + samsung,pin-pud = <3>; + samaung,pin-drv = <0>; + }; + + uart2_data: uart2-data { + samsung,pins = "gpa1-0", "gpa1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart2_fctl: uart2-fctl { + samsung,pins = "gpa1-2", "gpa1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samaung,pin-drv = <0>; + }; + + i2c3_bus: i2c3-bus { + samsung,pins = "gpa1-2", "gpa1-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samaung,pin-drv = <0>; + }; + + i2c3_hs_bus: i2c3-hs-bus { + samsung,pins = "gpa1-2", "gpa1-3"; + samsung,pin-function = <4>; + samsung,pin-pud = <3>; + samaung,pin-drv = <0>; + }; + + uart3_data: uart3-data { + samsung,pins = "gpa1-4", "gpa1-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + spi0_bus: spi0-bus { + samsung,pins = "gpa2-0", "gpa2-2", "gpa2-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c4_bus: i2c4-bus { + samsung,pins = "gpa2-0", "gpa2-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samaung,pin-drv = <0>; + }; + + i2c5_bus: i2c5-bus { + samsung,pins = "gpa2-2", "gpa2-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samaung,pin-drv = <0>; + }; + + spi1_bus: spi1-bus { + samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2s1_bus: i2s1-bus { + samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3", + "gpb0-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pcm1_bus: pcm1-bus { + samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3", + "gpb0-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + ac97_bus: ac97-bus { + samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3", + "gpb0-4"; + samsung,pin-function = <4>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2s2_bus: i2s2-bus { + samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3", + "gpb1-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pcm2_bus: pcm2-bus { + samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3", + "gpb1-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + spdif_bus: spdif-bus { + samsung,pins = "gpb1-0", "gpb1-1"; + samsung,pin-function = <4>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + spi2_bus: spi2-bus { + samsung,pins = "gpb1-1", "gpb1-3", "gpb1-4"; + samsung,pin-function = <5>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c6_bus: i2c6-bus { + samsung,pins = "gpb1-3", "gpb1-4"; + samsung,pin-function = <4>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c7_bus: i2c7-bus { + samsung,pins = "gpb2-2", "gpb2-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c0_bus: i2c0-bus { + samsung,pins = "gpb3-0", "gpb3-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c1_bus: i2c1-bus { + samsung,pins = "gpb3-2", "gpb3-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c0_hs_bus: i2c0-hs-bus { + samsung,pins = "gpb3-0", "gpb3-1"; + samsung,pin-function = <4>; + samsung,pin-pud = <3>; + samaung,pin-drv = <0>; + }; + + i2c1_hs_bus: i2c1-hs-bus { + samsung,pins = "gpb3-2", "gpb3-3"; + samsung,pin-function = <4>; + samsung,pin-pud = <3>; + samaung,pin-drv = <0>; + }; + + sd0_clk: sd0-clk { + samsung,pins = "gpc0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd0_cmd: sd0-cmd { + samsung,pins = "gpc0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd0_cd: sd0-cd { + samsung,pins = "gpc0-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_bus1: sd0-bus-width1 { + samsung,pins = "gpc0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_bus4: sd0-bus-width4 { + samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5", "gpc0-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_bus8: sd0-bus-width8 { + samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd1_clk: sd1-clk { + samsung,pins = "gpc2-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd1_cmd: sd1-cmd { + samsung,pins = "gpc2-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd1_cd: sd1-cd { + samsung,pins = "gpc2-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd1_bus1: sd1-bus-width1 { + samsung,pins = "gpc2-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd1_bus4: sd1-bus-width4 { + samsung,pins = "gpc2-3", "gpc2-4", "gpc2-5", "gpc2-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd2_clk: sd2-clk { + samsung,pins = "gpc3-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd2_cmd: sd2-cmd { + samsung,pins = "gpc3-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd2_cd: sd2-cd { + samsung,pins = "gpc3-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd2_bus1: sd2-bus-width1 { + samsung,pins = "gpc3-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd2_bus4: sd2-bus-width4 { + samsung,pins = "gpc3-3", "gpc3-4", "gpc3-5", "gpc3-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd2_bus8: sd2-bus-width8 { + samsung,pins = "gpc4-3", "gpc4-4", "gpc4-5", "gpc4-6"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd3_clk: sd3-clk { + samsung,pins = "gpc4-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd3_cmd: sd3-cmd { + samsung,pins = "gpc4-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd3_cd: sd3-cd { + samsung,pins = "gpc4-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd3_bus1: sd3-bus-width1 { + samsung,pins = "gpc4-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd3_bus4: sd3-bus-width4 { + samsung,pins = "gpc4-3", "gpc4-4", "gpc4-5", "gpc4-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + uart1_data: uart1-data { + samsung,pins = "gpd0-0", "gpd0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart1_fctl: uart1-fctl { + samsung,pins = "gpd0-2", "gpd0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samaung,pin-drv = <0>; + }; + }; + + pinctrl@13400000 { + gpe0: gpe0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe1: gpe1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf0: gpf0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf1: gpf1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg0: gpg0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg1: gpg1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg2: gpg2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gph0: gph0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gph1: gph1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + cam_gpio_a: cam-gpio-a { + samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3", + "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7", + "gpe1-0", "gpe1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + cam_gpio_b: cam-gpio-b { + samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3", + "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samaung,pin-drv = <0>; + }; + + cam_i2c2_bus: cam-i2c2-bus { + samsung,pins = "gpe0-6", "gpe1-0"; + samsung,pin-function = <4>; + samsung,pin-pud = <3>; + samaung,pin-drv = <0>; + }; + + cam_spi1_bus: cam-spi1-bus { + samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3"; + samsung,pin-function = <4>; + samsung,pin-pud = <0>; + samaung,pin-drv = <0>; + }; + + cam_i2c1_bus: cam-i2c1-bus { + samsung,pins = "gpf0-2", "gpf0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samaung,pin-drv = <0>; + }; + + cam_i2c0_bus: cam-i2c0-bus { + samsung,pins = "gpf0-0", "gpf0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samaung,pin-drv = <0>; + }; + + cam_spi0_bus: cam-spi0-bus { + samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samaung,pin-drv = <0>; + }; + + cam_bayrgb_bus: cam-bayrgb-bus { + samsung,pins = "gpg0-0", "gpg0-1", "gpg0-2", "gpg0-3", + "gpg0-4", "gpg0-5", "gpg0-6", "gpg0-7", + "gpg1-0", "gpg1-1", "gpg1-2", "gpg1-3", + "gpg1-4", "gpg1-5", "gpg1-6", "gpg1-7", + "gpg2-0", "gpg2-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samaung,pin-drv = <0>; + }; + + cam_port_a: cam-port-a { + samsung,pins = "gph0-0", "gph0-1", "gph0-2", "gph0-3", + "gph1-0", "gph1-1", "gph1-2", "gph1-3", + "gph1-4", "gph1-5", "gph1-6", "gph1-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samaung,pin-drv = <0>; + }; + }; + + pinctrl@10d10000 { + gpv0: gpv0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpv1: gpv1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpv2: gpv2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpv3: gpv3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpv4: gpv4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + c2c_rxd: c2c-rxd { + samsung,pins = "gpv0-0", "gpv0-1", "gpv0-2", "gpv0-3", + "gpv0-4", "gpv0-5", "gpv0-6", "gpv0-7", + "gpv1-0", "gpv1-1", "gpv1-2", "gpv1-3", + "gpv1-4", "gpv1-5", "gpv1-6", "gpv1-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samaung,pin-drv = <0>; + }; + + c2c_txd: c2c-txd { + samsung,pins = "gpv2-0", "gpv2-1", "gpv2-2", "gpv2-3", + "gpv2-4", "gpv2-5", "gpv2-6", "gpv2-7", + "gpv3-0", "gpv3-1", "gpv3-2", "gpv3-3", + "gpv3-4", "gpv3-5", "gpv3-6", "gpv3-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samaung,pin-drv = <0>; + }; + }; + + pinctrl@03680000 { + gpz: gpz { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + i2s0_bus: i2s0-bus { + samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3", + "gpz-4", "gpz-5", "gpz-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 1b8d4106d338..26d856ba50a1 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -30,8 +30,6 @@ i2c@12C60000 { samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <20000>; - gpios = <&gpb3 0 2 3 0>, - <&gpb3 1 2 3 0>; eeprom@50 { compatible = "samsung,s524ad0xd1"; @@ -42,8 +40,6 @@ i2c@12C70000 { samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <20000>; - gpios = <&gpb3 2 2 3 0>, - <&gpb3 3 2 3 0>; eeprom@51 { compatible = "samsung,s524ad0xd1"; @@ -74,8 +70,6 @@ i2c@12C80000 { samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; - gpios = <&gpa0 6 3 3 0>, - <&gpa0 7 3 3 0>; hdmiddc@50 { compatible = "samsung,exynos5-hdmiddc"; @@ -122,15 +116,12 @@ samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; slot@0 { reg = <0>; bus-width = <8>; - gpios = <&gpc0 0 2 0 3>, <&gpc0 1 2 0 3>, - <&gpc1 0 2 3 3>, <&gpc1 1 2 3 3>, - <&gpc1 2 2 3 3>, <&gpc1 3 2 3 3>, - <&gpc0 3 2 3 3>, <&gpc0 4 2 3 3>, - <&gpc0 5 2 3 3>, <&gpc0 6 2 3 3>; }; }; @@ -146,17 +137,13 @@ samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; slot@0 { reg = <0>; bus-width = <4>; - samsung,cd-pinmux-gpio = <&gpc3 2 2 3 3>; disable-wp; - gpios = <&gpc3 0 2 0 3>, <&gpc3 1 2 0 3>, - <&gpc3 3 2 3 3>, <&gpc3 4 2 3 3>, - <&gpc3 5 2 3 3>, <&gpc3 6 2 3 3>, - <&gpc4 3 3 3 3>, <&gpc4 3 3 3 3>, - <&gpc4 5 3 3 3>, <&gpc4 6 3 3 3>; }; }; @@ -169,10 +156,6 @@ }; spi_1: spi@12d30000 { - gpios = <&gpa2 4 2 3 0>, - <&gpa2 6 2 3 0>, - <&gpa2 7 2 3 0>; - w25q80bw@0 { #address-cells = <1>; #size-cells = <1>; @@ -181,7 +164,7 @@ spi-max-frequency = <1000000>; controller-data { - cs-gpio = <&gpa2 5 1 0 3>; + cs-gpio = <&gpa2 5 0>; samsung,spi-feedback-delay = <0>; }; @@ -203,7 +186,7 @@ }; hdmi { - hpd-gpio = <&gpx3 7 0xf 1 3>; + hpd-gpio = <&gpx3 7 0>; }; codec@11000000 { @@ -212,9 +195,7 @@ }; i2s0: i2s@03830000 { - gpios = <&gpz 0 2 0 0>, <&gpz 1 2 0 0>, <&gpz 2 2 0 0>, - <&gpz 3 2 0 0>, <&gpz 4 2 0 0>, <&gpz 5 2 0 0>, - <&gpz 6 2 0 0>; + status = "okay"; }; i2s1: i2s@12D60000 { @@ -231,4 +212,40 @@ samsung,i2s-controller = <&i2s0>; samsung,audio-codec = <&wm8994>; }; + + usb@12110000 { + samsung,vbus-gpio = <&gpx2 6 1 3 3>; + }; + + dp-controller { + samsung,color-space = <0>; + samsung,dynamic-range = <0>; + samsung,ycbcr-coeff = <0>; + samsung,color-depth = <1>; + samsung,link-rate = <0x0a>; + samsung,lane-count = <4>; + }; + + display-timings { + native-mode = <&timing0>; + timing0: timing@0 { + /* 1280x800 */ + clock-frequency = <50000>; + hactive = <1280>; + vactive = <800>; + hfront-porch = <4>; + hback-porch = <4>; + hsync-len = <4>; + vback-porch = <4>; + vfront-porch = <4>; + vsync-len = <4>; + }; + }; + + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti"; + clock-frequency = <24000000>; + }; + }; }; diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts index 17dd951c1cd2..bf4744bab445 100644 --- a/arch/arm/boot/dts/exynos5250-snow.dts +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -16,12 +16,31 @@ model = "Google Snow"; compatible = "google,snow", "samsung,exynos5250"; + aliases { + i2c104 = &i2c_104; + }; + + pinctrl@11400000 { + sd3_clk: sd3-clk { + samsung,pin-drv = <0>; + }; + + sd3_cmd: sd3-cmd { + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + sd3_bus4: sd3-bus-width4 { + samsung,pin-drv = <0>; + }; + }; + gpio-keys { compatible = "gpio-keys"; lid-switch { label = "Lid"; - gpios = <&gpx3 5 0 0x10000 0>; + gpios = <&gpx3 5 1>; linux,input-type = <5>; /* EV_SW */ linux,code = <0>; /* SW_LID */ debounce-interval = <1>; @@ -29,15 +48,148 @@ }; }; + i2c-arbitrator { + compatible = "i2c-arb-gpio-challenge"; + #address-cells = <1>; + #size-cells = <0>; + + i2c-parent = <&{/i2c@12CA0000}>; + + our-claim-gpio = <&gpf0 3 1>; + their-claim-gpios = <&gpe0 4 1>; + slew-delay-us = <10>; + wait-retry-us = <3000>; + wait-free-us = <50000>; + + /* Use ID 104 as a hint that we're on physical bus 4 */ + i2c_104: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + battery: sbs-battery@b { + compatible = "sbs,sbs-battery"; + reg = <0xb>; + sbs,poll-retry-count = <1>; + }; + + ec: embedded-controller { + compatible = "google,cros-ec-i2c"; + reg = <0x1e>; + interrupts = <6 0>; + interrupt-parent = <&gpx1>; + wakeup-source; + + keyboard-controller { + compatible = "google,cros-ec-keyb"; + keypad,num-rows = <8>; + keypad,num-columns = <13>; + google,needs-ghost-filter; + linux,keymap = <0x0001003a /* CAPSLK */ + 0x0002003b /* F1 */ + 0x00030030 /* B */ + 0x00040044 /* F10 */ + 0x00060031 /* N */ + 0x0008000d /* = */ + 0x000a0064 /* R_ALT */ + + 0x01010001 /* ESC */ + 0x0102003e /* F4 */ + 0x01030022 /* G */ + 0x01040041 /* F7 */ + 0x01060023 /* H */ + 0x01080028 /* ' */ + 0x01090043 /* F9 */ + 0x010b000e /* BKSPACE */ + + 0x0200001d /* L_CTRL */ + 0x0201000f /* TAB */ + 0x0202003d /* F3 */ + 0x02030014 /* T */ + 0x02040040 /* F6 */ + 0x0205001b /* ] */ + 0x02060015 /* Y */ + 0x02070056 /* 102ND */ + 0x0208001a /* [ */ + 0x02090042 /* F8 */ + + 0x03010029 /* GRAVE */ + 0x0302003c /* F2 */ + 0x03030006 /* 5 */ + 0x0304003f /* F5 */ + 0x03060007 /* 6 */ + 0x0308000c /* - */ + 0x030b002b /* \ */ + + 0x04000061 /* R_CTRL */ + 0x0401001e /* A */ + 0x04020020 /* D */ + 0x04030021 /* F */ + 0x0404001f /* S */ + 0x04050025 /* K */ + 0x04060024 /* J */ + 0x04080027 /* ; */ + 0x04090026 /* L */ + 0x040b001c /* ENTER */ + + 0x0501002c /* Z */ + 0x0502002e /* C */ + 0x0503002f /* V */ + 0x0504002d /* X */ + 0x05050033 /* , */ + 0x05060032 /* M */ + 0x0507002a /* L_SHIFT */ + 0x05080035 /* / */ + 0x05090034 /* . */ + 0x050B0039 /* SPACE */ + + 0x06010002 /* 1 */ + 0x06020004 /* 3 */ + 0x06030005 /* 4 */ + 0x06040003 /* 2 */ + 0x06050009 /* 8 */ + 0x06060008 /* 7 */ + 0x0608000b /* 0 */ + 0x0609000a /* 9 */ + 0x060a0038 /* L_ALT */ + 0x060b006c /* DOWN */ + 0x060c006a /* RIGHT */ + + 0x07010010 /* Q */ + 0x07020012 /* E */ + 0x07030013 /* R */ + 0x07040011 /* W */ + 0x07050017 /* I */ + 0x07060016 /* U */ + 0x07070036 /* R_SHIFT */ + 0x07080019 /* P */ + 0x07090018 /* O */ + 0x070b0067 /* UP */ + 0x070c0069>; /* LEFT */ + }; + }; + }; + }; + /* * On Snow we've got SIP WiFi and so can keep drive strengths low to * reduce EMI. */ dwmmc3@12230000 { slot@0 { - gpios = <&gpc4 0 2 0 0>, <&gpc4 1 2 3 0>, - <&gpc4 3 2 3 0>, <&gpc4 4 2 3 0>, - <&gpc4 5 2 3 0>, <&gpc4 6 2 3 0>; + pinctrl-names = "default"; + pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>; + }; + }; + + usb@12110000 { + samsung,vbus-gpio = <&gpx1 1 1 3 3>; + }; + + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti"; + clock-frequency = <24000000>; }; }; }; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index b1ac73e21c80..98dfc3ea5c0b 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -18,6 +18,7 @@ */ /include/ "skeleton.dtsi" +/include/ "exynos5250-pinctrl.dtsi" / { compatible = "samsung,exynos5250"; @@ -44,13 +45,50 @@ i2c6 = &i2c_6; i2c7 = &i2c_7; i2c8 = &i2c_8; + pinctrl0 = &pinctrl_0; + pinctrl1 = &pinctrl_1; + pinctrl2 = &pinctrl_2; + pinctrl3 = &pinctrl_3; + }; + + chipid@10000000 { + compatible = "samsung,exynos4210-chipid"; + reg = <0x10000000 0x100>; + }; + + pd_gsc: gsc-power-domain@0x10044000 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10044000 0x20>; + }; + + pd_mfc: mfc-power-domain@0x10044040 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10044040 0x20>; + }; + + clock: clock-controller@0x10010000 { + compatible = "samsung,exynos5250-clock"; + reg = <0x10010000 0x30000>; + #clock-cells = <1>; }; gic:interrupt-controller@10481000 { - compatible = "arm,cortex-a9-gic"; + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; #interrupt-cells = <3>; interrupt-controller; - reg = <0x10481000 0x1000>, <0x10482000 0x2000>; + reg = <0x10481000 0x1000>, + <0x10482000 0x1000>, + <0x10484000 0x2000>, + <0x10486000 0x2000>; + interrupts = <1 9 0xf04>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 13 0xf08>, + <1 14 0xf08>, + <1 11 0xf08>, + <1 10 0xf08>; }; combiner:interrupt-controller@10440000 { @@ -69,58 +107,136 @@ <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>; }; + mct@101C0000 { + compatible = "samsung,exynos4210-mct"; + reg = <0x101C0000 0x800>; + interrupt-controller; + #interrups-cells = <2>; + interrupt-parent = <&mct_map>; + interrupts = <0 0>, <1 0>, <2 0>, <3 0>, + <4 0>, <5 0>; + clocks = <&clock 1>, <&clock 335>; + clock-names = "fin_pll", "mct"; + + mct_map: mct-map { + #interrupt-cells = <2>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = <0x0 0 &combiner 23 3>, + <0x1 0 &combiner 23 4>, + <0x2 0 &combiner 25 2>, + <0x3 0 &combiner 25 3>, + <0x4 0 &gic 0 120 0>, + <0x5 0 &gic 0 121 0>; + }; + }; + + pmu { + compatible = "arm,cortex-a15-pmu"; + interrupt-parent = <&combiner>; + interrupts = <1 2>, <22 4>; + }; + + pinctrl_0: pinctrl@11400000 { + compatible = "samsung,exynos5250-pinctrl"; + reg = <0x11400000 0x1000>; + interrupts = <0 46 0>; + + wakup_eint: wakeup-interrupt-controller { + compatible = "samsung,exynos4210-wakeup-eint"; + interrupt-parent = <&gic>; + interrupts = <0 32 0>; + }; + }; + + pinctrl_1: pinctrl@13400000 { + compatible = "samsung,exynos5250-pinctrl"; + reg = <0x13400000 0x1000>; + interrupts = <0 45 0>; + }; + + pinctrl_2: pinctrl@10d10000 { + compatible = "samsung,exynos5250-pinctrl"; + reg = <0x10d10000 0x1000>; + interrupts = <0 50 0>; + }; + + pinctrl_3: pinctrl@03680000 { + compatible = "samsung,exynos5250-pinctrl"; + reg = <0x0368000 0x1000>; + interrupts = <0 47 0>; + }; + watchdog { compatible = "samsung,s3c2410-wdt"; reg = <0x101D0000 0x100>; interrupts = <0 42 0>; + clocks = <&clock 336>; + clock-names = "watchdog"; }; codec@11000000 { compatible = "samsung,mfc-v6"; reg = <0x11000000 0x10000>; interrupts = <0 96 0>; + samsung,power-domain = <&pd_mfc>; }; rtc { compatible = "samsung,s3c6410-rtc"; reg = <0x101E0000 0x100>; interrupts = <0 43 0>, <0 44 0>; + clocks = <&clock 337>; + clock-names = "rtc"; + status = "disabled"; }; tmu@10060000 { compatible = "samsung,exynos5250-tmu"; reg = <0x10060000 0x100>; interrupts = <0 65 0>; + clocks = <&clock 338>; + clock-names = "tmu_apbif"; }; serial@12C00000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C00000 0x100>; interrupts = <0 51 0>; + clocks = <&clock 289>, <&clock 146>; + clock-names = "uart", "clk_uart_baud0"; }; serial@12C10000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C10000 0x100>; interrupts = <0 52 0>; + clocks = <&clock 290>, <&clock 147>; + clock-names = "uart", "clk_uart_baud0"; }; serial@12C20000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C20000 0x100>; interrupts = <0 53 0>; + clocks = <&clock 291>, <&clock 148>; + clock-names = "uart", "clk_uart_baud0"; }; serial@12C30000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C30000 0x100>; interrupts = <0 54 0>; + clocks = <&clock 292>, <&clock 149>; + clock-names = "uart", "clk_uart_baud0"; }; sata@122F0000 { compatible = "samsung,exynos5-sata-ahci"; reg = <0x122F0000 0x1ff>; interrupts = <0 115 0>; + clocks = <&clock 277>, <&clock 143>; + clock-names = "sata", "sclk_sata"; }; sata-phy@12170000 { @@ -134,6 +250,10 @@ interrupts = <0 56 0>; #address-cells = <1>; #size-cells = <0>; + clocks = <&clock 294>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_bus>; }; i2c_1: i2c@12C70000 { @@ -142,6 +262,10 @@ interrupts = <0 57 0>; #address-cells = <1>; #size-cells = <0>; + clocks = <&clock 295>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_bus>; }; i2c_2: i2c@12C80000 { @@ -150,6 +274,10 @@ interrupts = <0 58 0>; #address-cells = <1>; #size-cells = <0>; + clocks = <&clock 296>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_bus>; }; i2c_3: i2c@12C90000 { @@ -158,6 +286,10 @@ interrupts = <0 59 0>; #address-cells = <1>; #size-cells = <0>; + clocks = <&clock 297>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_bus>; }; i2c_4: i2c@12CA0000 { @@ -166,6 +298,10 @@ interrupts = <0 60 0>; #address-cells = <1>; #size-cells = <0>; + clocks = <&clock 298>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_bus>; }; i2c_5: i2c@12CB0000 { @@ -174,6 +310,10 @@ interrupts = <0 61 0>; #address-cells = <1>; #size-cells = <0>; + clocks = <&clock 299>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_bus>; }; i2c_6: i2c@12CC0000 { @@ -182,6 +322,10 @@ interrupts = <0 62 0>; #address-cells = <1>; #size-cells = <0>; + clocks = <&clock 300>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c6_bus>; }; i2c_7: i2c@12CD0000 { @@ -190,6 +334,10 @@ interrupts = <0 63 0>; #address-cells = <1>; #size-cells = <0>; + clocks = <&clock 301>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c7_bus>; }; i2c_8: i2c@12CE0000 { @@ -198,6 +346,8 @@ interrupts = <0 64 0>; #address-cells = <1>; #size-cells = <0>; + clocks = <&clock 302>; + clock-names = "i2c"; }; i2c@121D0000 { @@ -205,6 +355,8 @@ reg = <0x121D0000 0x100>; #address-cells = <1>; #size-cells = <0>; + clocks = <&clock 288>; + clock-names = "i2c"; }; spi_0: spi@12d20000 { @@ -216,6 +368,10 @@ dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; + clocks = <&clock 304>, <&clock 154>; + clock-names = "spi", "spi_busclk0"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_bus>; }; spi_1: spi@12d30000 { @@ -227,6 +383,10 @@ dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; + clocks = <&clock 305>, <&clock 155>; + clock-names = "spi", "spi_busclk0"; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_bus>; }; spi_2: spi@12d40000 { @@ -238,6 +398,10 @@ dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; + clocks = <&clock 306>, <&clock 156>; + clock-names = "spi", "spi_busclk0"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_bus>; }; dwmmc_0: dwmmc0@12200000 { @@ -246,6 +410,8 @@ interrupts = <0 75 0>; #address-cells = <1>; #size-cells = <0>; + clocks = <&clock 280>, <&clock 139>; + clock-names = "biu", "ciu"; }; dwmmc_1: dwmmc1@12210000 { @@ -254,6 +420,8 @@ interrupts = <0 76 0>; #address-cells = <1>; #size-cells = <0>; + clocks = <&clock 281>, <&clock 140>; + clock-names = "biu", "ciu"; }; dwmmc_2: dwmmc2@12220000 { @@ -262,6 +430,8 @@ interrupts = <0 77 0>; #address-cells = <1>; #size-cells = <0>; + clocks = <&clock 282>, <&clock 141>; + clock-names = "biu", "ciu"; }; dwmmc_3: dwmmc3@12230000 { @@ -270,6 +440,8 @@ interrupts = <0 78 0>; #address-cells = <1>; #size-cells = <0>; + clocks = <&clock 283>, <&clock 142>; + clock-names = "biu", "ciu"; }; i2s0: i2s@03830000 { @@ -283,6 +455,8 @@ samsung,supports-rstclr; samsung,supports-secdai; samsung,idma-addr = <0x03000000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_bus>; }; i2s1: i2s@12D60000 { @@ -291,6 +465,8 @@ dmas = <&pdma1 12 &pdma1 11>; dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&i2s1_bus>; }; i2s2: i2s@12D70000 { @@ -299,6 +475,26 @@ dmas = <&pdma0 12 &pdma0 11>; dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&i2s2_bus>; + }; + + usb@12110000 { + compatible = "samsung,exynos4210-ehci"; + reg = <0x12110000 0x100>; + interrupts = <0 71 0>; + + clocks = <&clock 285>; + clock-names = "usbhost"; + }; + + usb@12120000 { + compatible = "samsung,exynos4210-ohci"; + reg = <0x12120000 0x100>; + interrupts = <0 71 0>; + + clocks = <&clock 285>; + clock-names = "usbhost"; }; amba { @@ -312,6 +508,8 @@ compatible = "arm,pl330", "arm,primecell"; reg = <0x121A0000 0x1000>; interrupts = <0 34 0>; + clocks = <&clock 275>; + clock-names = "apb_pclk"; #dma-cells = <1>; #dma-channels = <8>; #dma-requests = <32>; @@ -321,6 +519,8 @@ compatible = "arm,pl330", "arm,primecell"; reg = <0x121B0000 0x1000>; interrupts = <0 35 0>; + clocks = <&clock 276>; + clock-names = "apb_pclk"; #dma-cells = <1>; #dma-channels = <8>; #dma-requests = <32>; @@ -330,6 +530,8 @@ compatible = "arm,pl330", "arm,primecell"; reg = <0x10800000 0x1000>; interrupts = <0 33 0>; + clocks = <&clock 271>; + clock-names = "apb_pclk"; #dma-cells = <1>; #dma-channels = <8>; #dma-requests = <1>; @@ -339,287 +541,58 @@ compatible = "arm,pl330", "arm,primecell"; reg = <0x11C10000 0x1000>; interrupts = <0 124 0>; + clocks = <&clock 271>; + clock-names = "apb_pclk"; #dma-cells = <1>; #dma-channels = <8>; #dma-requests = <1>; }; }; - gpio-controllers { - #address-cells = <1>; - #size-cells = <1>; - gpio-controller; - ranges; - - gpa0: gpio-controller@11400000 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400000 0x20>; - #gpio-cells = <4>; - }; - - gpa1: gpio-controller@11400020 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400020 0x20>; - #gpio-cells = <4>; - }; - - gpa2: gpio-controller@11400040 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400040 0x20>; - #gpio-cells = <4>; - }; - - gpb0: gpio-controller@11400060 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400060 0x20>; - #gpio-cells = <4>; - }; - - gpb1: gpio-controller@11400080 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400080 0x20>; - #gpio-cells = <4>; - }; - - gpb2: gpio-controller@114000A0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x114000A0 0x20>; - #gpio-cells = <4>; - }; - - gpb3: gpio-controller@114000C0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x114000C0 0x20>; - #gpio-cells = <4>; - }; - - gpc0: gpio-controller@114000E0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x114000E0 0x20>; - #gpio-cells = <4>; - }; - - gpc1: gpio-controller@11400100 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400100 0x20>; - #gpio-cells = <4>; - }; - - gpc2: gpio-controller@11400120 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400120 0x20>; - #gpio-cells = <4>; - }; - - gpc3: gpio-controller@11400140 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400140 0x20>; - #gpio-cells = <4>; - }; - - gpc4: gpio-controller@114002E0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x114002E0 0x20>; - #gpio-cells = <4>; - }; - - gpd0: gpio-controller@11400160 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400160 0x20>; - #gpio-cells = <4>; - }; - - gpd1: gpio-controller@11400180 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400180 0x20>; - #gpio-cells = <4>; - }; - - gpy0: gpio-controller@114001A0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x114001A0 0x20>; - #gpio-cells = <4>; - }; - - gpy1: gpio-controller@114001C0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x114001C0 0x20>; - #gpio-cells = <4>; - }; - - gpy2: gpio-controller@114001E0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x114001E0 0x20>; - #gpio-cells = <4>; - }; - - gpy3: gpio-controller@11400200 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400200 0x20>; - #gpio-cells = <4>; - }; - - gpy4: gpio-controller@11400220 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400220 0x20>; - #gpio-cells = <4>; - }; - - gpy5: gpio-controller@11400240 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400240 0x20>; - #gpio-cells = <4>; - }; - - gpy6: gpio-controller@11400260 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400260 0x20>; - #gpio-cells = <4>; - }; - - gpx0: gpio-controller@11400C00 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400C00 0x20>; - #gpio-cells = <4>; - }; - - gpx1: gpio-controller@11400C20 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400C20 0x20>; - #gpio-cells = <4>; - }; - - gpx2: gpio-controller@11400C40 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400C40 0x20>; - #gpio-cells = <4>; - }; - - gpx3: gpio-controller@11400C60 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400C60 0x20>; - #gpio-cells = <4>; - }; - - gpe0: gpio-controller@13400000 { - compatible = "samsung,exynos4-gpio"; - reg = <0x13400000 0x20>; - #gpio-cells = <4>; - }; - - gpe1: gpio-controller@13400020 { - compatible = "samsung,exynos4-gpio"; - reg = <0x13400020 0x20>; - #gpio-cells = <4>; - }; - - gpf0: gpio-controller@13400040 { - compatible = "samsung,exynos4-gpio"; - reg = <0x13400040 0x20>; - #gpio-cells = <4>; - }; - - gpf1: gpio-controller@13400060 { - compatible = "samsung,exynos4-gpio"; - reg = <0x13400060 0x20>; - #gpio-cells = <4>; - }; - - gpg0: gpio-controller@13400080 { - compatible = "samsung,exynos4-gpio"; - reg = <0x13400080 0x20>; - #gpio-cells = <4>; - }; - - gpg1: gpio-controller@134000A0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x134000A0 0x20>; - #gpio-cells = <4>; - }; - - gpg2: gpio-controller@134000C0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x134000C0 0x20>; - #gpio-cells = <4>; - }; - - gph0: gpio-controller@134000E0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x134000E0 0x20>; - #gpio-cells = <4>; - }; - - gph1: gpio-controller@13400100 { - compatible = "samsung,exynos4-gpio"; - reg = <0x13400100 0x20>; - #gpio-cells = <4>; - }; - - gpv0: gpio-controller@10D10000 { - compatible = "samsung,exynos4-gpio"; - reg = <0x10D10000 0x20>; - #gpio-cells = <4>; - }; - - gpv1: gpio-controller@10D10020 { - compatible = "samsung,exynos4-gpio"; - reg = <0x10D10020 0x20>; - #gpio-cells = <4>; - }; - - gpv2: gpio-controller@10D10040 { - compatible = "samsung,exynos4-gpio"; - reg = <0x10D10060 0x20>; - #gpio-cells = <4>; - }; - - gpv3: gpio-controller@10D10060 { - compatible = "samsung,exynos4-gpio"; - reg = <0x10D10080 0x20>; - #gpio-cells = <4>; - }; - - gpv4: gpio-controller@10D10080 { - compatible = "samsung,exynos4-gpio"; - reg = <0x10D100C0 0x20>; - #gpio-cells = <4>; - }; - - gpz: gpio-controller@03860000 { - compatible = "samsung,exynos4-gpio"; - reg = <0x03860000 0x20>; - #gpio-cells = <4>; - }; - }; - gsc_0: gsc@0x13e00000 { compatible = "samsung,exynos5-gsc"; reg = <0x13e00000 0x1000>; interrupts = <0 85 0>; + samsung,power-domain = <&pd_gsc>; + clocks = <&clock 256>; + clock-names = "gscl"; }; gsc_1: gsc@0x13e10000 { compatible = "samsung,exynos5-gsc"; reg = <0x13e10000 0x1000>; interrupts = <0 86 0>; + samsung,power-domain = <&pd_gsc>; + clocks = <&clock 257>; + clock-names = "gscl"; }; gsc_2: gsc@0x13e20000 { compatible = "samsung,exynos5-gsc"; reg = <0x13e20000 0x1000>; interrupts = <0 87 0>; + samsung,power-domain = <&pd_gsc>; + clocks = <&clock 258>; + clock-names = "gscl"; }; gsc_3: gsc@0x13e30000 { compatible = "samsung,exynos5-gsc"; reg = <0x13e30000 0x1000>; interrupts = <0 88 0>; + samsung,power-domain = <&pd_gsc>; + clocks = <&clock 259>; + clock-names = "gscl"; }; hdmi { compatible = "samsung,exynos5-hdmi"; reg = <0x14530000 0x70000>; interrupts = <0 95 0>; + clocks = <&clock 333>, <&clock 136>, <&clock 137>, + <&clock 333>, <&clock 333>; + clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", + "sclk_hdmiphy", "hdmiphy"; }; mixer { @@ -627,4 +600,28 @@ reg = <0x14450000 0x10000>; interrupts = <0 94 0>; }; + + dp-controller { + compatible = "samsung,exynos5-dp"; + reg = <0x145b0000 0x1000>; + interrupts = <10 3>; + interrupt-parent = <&combiner>; + #address-cells = <1>; + #size-cells = <0>; + + dptx-phy { + reg = <0x10040720>; + samsung,enable-mask = <1>; + }; + }; + + fimd { + compatible = "samsung,exynos5250-fimd"; + interrupt-parent = <&combiner>; + reg = <0x14400000 0x40000>; + interrupt-names = "fifo", "vsync", "lcd_sys"; + interrupts = <18 4>, <18 5>, <18 6>; + clocks = <&clock 133>, <&clock 339>; + clock-names = "sclk_fimd", "fimd"; + }; }; diff --git a/arch/arm/boot/dts/exynos5440-sd5v1.dts b/arch/arm/boot/dts/exynos5440-sd5v1.dts new file mode 100644 index 000000000000..ef747b52b674 --- /dev/null +++ b/arch/arm/boot/dts/exynos5440-sd5v1.dts @@ -0,0 +1,39 @@ +/* + * SAMSUNG SD5v1 board device tree source + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +/include/ "exynos5440.dtsi" + +/ { + model = "SAMSUNG SD5v1 board based on EXYNOS5440"; + compatible = "samsung,sd5v1", "samsung,exynos5440"; + + chosen { + bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel early_printk no_console_suspend mem=2048M@0x80000000 console=ttySAC0,115200"; + }; + + fixed-rate-clocks { + xtal { + compatible = "samsung,clock-xtal"; + clock-frequency = <50000000>; + }; + }; + + gmac: ethernet@00230000 { + fixed_phy; + phy_addr = <1>; + }; + + spi { + status = "disabled"; + }; + +}; diff --git a/arch/arm/boot/dts/exynos5440-ssdk5440.dts b/arch/arm/boot/dts/exynos5440-ssdk5440.dts index 81e2c964a900..d55042beb5c5 100644 --- a/arch/arm/boot/dts/exynos5440-ssdk5440.dts +++ b/arch/arm/boot/dts/exynos5440-ssdk5440.dts @@ -16,31 +16,18 @@ model = "SAMSUNG SSDK5440 board based on EXYNOS5440"; compatible = "samsung,ssdk5440", "samsung,exynos5440"; - memory { - reg = <0x80000000 0x80000000>; - }; - chosen { - bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x81000000,8M console=ttySAC0,115200 init=/linuxrc"; + bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel early_printk no_console_suspend mem=2048M@0x80000000 console=ttySAC0,115200"; }; spi { status = "disabled"; }; - i2c@F0000 { - status = "disabled"; - }; - - i2c@100000 { - status = "disabled"; - }; - - watchdog { - status = "disabled"; - }; - - rtc { - status = "disabled"; + fixed-rate-clocks { + xtal { + compatible = "samsung,clock-xtal"; + clock-frequency = <50000000>; + }; }; }; diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi index 9a99755920c0..f6b1c8973845 100644 --- a/arch/arm/boot/dts/exynos5440.dtsi +++ b/arch/arm/boot/dts/exynos5440.dtsi @@ -16,63 +16,89 @@ interrupt-parent = <&gic>; + clock: clock-controller@0x160000 { + compatible = "samsung,exynos5440-clock"; + reg = <0x160000 0x1000>; + #clock-cells = <1>; + }; + gic:interrupt-controller@2E0000 { compatible = "arm,cortex-a15-gic"; #interrupt-cells = <3>; interrupt-controller; - reg = <0x2E1000 0x1000>, <0x2E2000 0x1000>; + reg = <0x2E1000 0x1000>, + <0x2E2000 0x1000>, + <0x2E4000 0x2000>, + <0x2E6000 0x2000>; + interrupts = <1 9 0xf04>; }; cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { compatible = "arm,cortex-a15"; - timer { - compatible = "arm,armv7-timer"; - interrupts = <1 13 0xf08>; - clock-frequency = <1000000>; - }; + reg = <0>; }; cpu@1 { compatible = "arm,cortex-a15"; - timer { - compatible = "arm,armv7-timer"; - interrupts = <1 14 0xf08>; - clock-frequency = <1000000>; - }; + reg = <1>; }; cpu@2 { compatible = "arm,cortex-a15"; - timer { - compatible = "arm,armv7-timer"; - interrupts = <1 14 0xf08>; - clock-frequency = <1000000>; - }; + reg = <2>; }; cpu@3 { compatible = "arm,cortex-a15"; - timer { - compatible = "arm,armv7-timer"; - interrupts = <1 14 0xf08>; - clock-frequency = <1000000>; - }; + reg = <3>; }; }; - common { - compatible = "samsung,exynos5440"; + arm-pmu { + compatible = "arm,cortex-a15-pmu", "arm,cortex-a9-pmu"; + interrupts = <0 52 4>, + <0 53 4>, + <0 54 4>, + <0 55 4>; + }; + + timer { + compatible = "arm,cortex-a15-timer", + "arm,armv7-timer"; + interrupts = <1 13 0xf08>, + <1 14 0xf08>, + <1 11 0xf08>, + <1 10 0xf08>; + clock-frequency = <50000000>; + }; + cpufreq@160000 { + compatible = "samsung,exynos5440-cpufreq"; + reg = <0x160000 0x1000>; + interrupts = <0 57 0>; + operating-points = < + /* KHz uV */ + 1200000 1025000 + 1000000 975000 + 800000 925000 + >; }; serial@B0000 { compatible = "samsung,exynos4210-uart"; reg = <0xB0000 0x1000>; interrupts = <0 2 0>; + clocks = <&clock 21>, <&clock 21>; + clock-names = "uart", "clk_uart_baud0"; }; serial@C0000 { compatible = "samsung,exynos4210-uart"; reg = <0xC0000 0x1000>; interrupts = <0 3 0>; + clocks = <&clock 21>, <&clock 21>; + clock-names = "uart", "clk_uart_baud0"; }; spi { @@ -83,11 +109,15 @@ rx-dma-channel = <&pdma0 4>; /* preliminary */ #address-cells = <1>; #size-cells = <0>; + clocks = <&clock 21>, <&clock 16>; + clock-names = "spi", "spi_busclk0"; }; pinctrl { compatible = "samsung,exynos5440-pinctrl"; reg = <0xE0000 0x1000>; + interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>, + <0 41 0>, <0 42 0>, <0 43 0>, <0 44 0>; interrupt-controller; #interrupt-cells = <2>; #gpio-cells = <2>; @@ -110,25 +140,42 @@ }; i2c@F0000 { - compatible = "samsung,s3c2440-i2c"; + compatible = "samsung,exynos5440-i2c"; reg = <0xF0000 0x1000>; interrupts = <0 5 0>; #address-cells = <1>; #size-cells = <0>; + clocks = <&clock 21>; + clock-names = "i2c"; }; i2c@100000 { - compatible = "samsung,s3c2440-i2c"; + compatible = "samsung,exynos5440-i2c"; reg = <0x100000 0x1000>; interrupts = <0 6 0>; #address-cells = <1>; #size-cells = <0>; + clocks = <&clock 21>; + clock-names = "i2c"; }; watchdog { compatible = "samsung,s3c2410-wdt"; reg = <0x110000 0x1000>; interrupts = <0 1 0>; + clocks = <&clock 21>; + clock-names = "watchdog"; + }; + + gmac: ethernet@00230000 { + compatible = "snps,dwmac-3.70a"; + reg = <0x00230000 0x8000>; + interrupt-parent = <&gic>; + interrupts = <0 31 4>; + interrupt-names = "macirq"; + phy-mode = "sgmii"; + clocks = <&clock 25>; + clock-names = "stmmaceth"; }; amba { @@ -138,19 +185,23 @@ interrupt-parent = <&gic>; ranges; - pdma0: pdma@121A0000 { + pdma0: pdma@00121000 { compatible = "arm,pl330", "arm,primecell"; - reg = <0x120000 0x1000>; - interrupts = <0 34 0>; + reg = <0x121000 0x1000>; + interrupts = <0 46 0>; + clocks = <&clock 8>; + clock-names = "apb_pclk"; #dma-cells = <1>; #dma-channels = <8>; #dma-requests = <32>; }; - pdma1: pdma@121B0000 { + pdma1: pdma@00120000 { compatible = "arm,pl330", "arm,primecell"; - reg = <0x121000 0x1000>; - interrupts = <0 35 0>; + reg = <0x120000 0x1000>; + interrupts = <0 47 0>; + clocks = <&clock 8>; + clock-names = "apb_pclk"; #dma-cells = <1>; #dma-channels = <8>; #dma-requests = <32>; @@ -161,5 +212,8 @@ compatible = "samsung,s3c6410-rtc"; reg = <0x130000 0x1000>; interrupts = <0 17 0>, <0 16 0>; + clocks = <&clock 21>; + clock-names = "rtc"; + status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/href.dtsi b/arch/arm/boot/dts/href.dtsi index 379128eb9d98..c0bc426952ea 100644 --- a/arch/arm/boot/dts/href.dtsi +++ b/arch/arm/boot/dts/href.dtsi @@ -87,6 +87,7 @@ mmc-cap-sd-highspeed; mmc-cap-mmc-highspeed; vmmc-supply = <&ab8500_ldo_aux3_reg>; + vqmmc-supply = <&vmmci>; cd-gpios = <&tc3589x_gpio 3 0x4>; diff --git a/arch/arm/boot/dts/hrefprev60.dts b/arch/arm/boot/dts/hrefprev60.dts index eec29c4a86dc..c2d274815923 100644 --- a/arch/arm/boot/dts/hrefprev60.dts +++ b/arch/arm/boot/dts/hrefprev60.dts @@ -25,6 +25,14 @@ }; soc-u9500 { + prcmu@80157000 { + ab8500@5 { + ab8500-gpio { + compatible = "stericsson,ab8500-gpio"; + }; + }; + }; + i2c@80004000 { tps61052@33 { compatible = "tps61052"; @@ -40,7 +48,7 @@ vmmci: regulator-gpio { gpios = <&tc3589x_gpio 18 0x4>; - gpio-enable = <&tc3589x_gpio 17 0x4>; + enable-gpio = <&tc3589x_gpio 17 0x4>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts index 035c13f9d3c0..da0588a04131 100644 --- a/arch/arm/boot/dts/imx23-evk.dts +++ b/arch/arm/boot/dts/imx23-evk.dts @@ -59,8 +59,33 @@ lcdif@80030000 { pinctrl-names = "default"; pinctrl-0 = <&lcdif_24bit_pins_a>; - panel-enable-gpios = <&gpio1 18 0>; + lcd-supply = <®_lcd_3v3>; + display = <&display>; status = "okay"; + + display: display { + bits-per-pixel = <32>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <9200000>; + hactive = <480>; + vactive = <272>; + hback-porch = <15>; + hfront-porch = <8>; + vback-porch = <12>; + vfront-porch = <4>; + hsync-len = <1>; + vsync-len = <1>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; }; }; @@ -95,6 +120,15 @@ regulator-max-microvolt = <3300000>; gpio = <&gpio1 29 0>; }; + + reg_lcd_3v3: lcd-3v3 { + compatible = "regulator-fixed"; + regulator-name = "lcd-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 18 0>; + enable-active-high; + }; }; backlight { diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts index e7484e4ea659..d107c4af321f 100644 --- a/arch/arm/boot/dts/imx23-olinuxino.dts +++ b/arch/arm/boot/dts/imx23-olinuxino.dts @@ -29,6 +29,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>; bus-width = <4>; + broken-cd; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index 56afcf41aae0..73fd7d0887b5 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -49,9 +49,15 @@ reg = <0x80000000 0x2000>; }; - dma-apbh@80004000 { + dma_apbh: dma-apbh@80004000 { compatible = "fsl,imx23-dma-apbh"; reg = <0x80004000 0x2000>; + interrupts = <0 14 20 0 + 13 13 13 13>; + interrupt-names = "empty", "ssp0", "ssp1", "empty", + "gpmi0", "gpmi1", "gpmi2", "gpmi3"; + #dma-cells = <1>; + dma-channels = <8>; clocks = <&clks 15>; }; @@ -70,6 +76,8 @@ interrupt-names = "gpmi-dma", "bch"; clocks = <&clks 34>; clock-names = "gpmi_io"; + dmas = <&dma_apbh 4>; + dma-names = "rx-tx"; fsl,gpmi-dma-channel = <4>; status = "disabled"; }; @@ -78,6 +86,8 @@ reg = <0x80010000 0x2000>; interrupts = <15 14>; clocks = <&clks 33>; + dmas = <&dma_apbh 1>; + dma-names = "rx-tx"; fsl,ssp-dma-channel = <1>; status = "disabled"; }; @@ -295,6 +305,7 @@ }; digctl@8001c000 { + compatible = "fsl,imx23-digctl"; reg = <0x8001c000 2000>; status = "disabled"; }; @@ -304,9 +315,19 @@ status = "disabled"; }; - dma-apbx@80024000 { + dma_apbx: dma-apbx@80024000 { compatible = "fsl,imx23-dma-apbx"; reg = <0x80024000 0x2000>; + interrupts = <7 5 9 26 + 19 0 25 23 + 60 58 9 0 + 0 0 0 0>; + interrupt-names = "audio-adc", "audio-dac", "spdif-tx", "i2c", + "saif0", "empty", "auart0-rx", "auart0-tx", + "auart1-rx", "auart1-tx", "saif1", "empty", + "empty", "empty", "empty", "empty"; + #dma-cells = <1>; + dma-channels = <16>; clocks = <&clks 16>; }; @@ -321,6 +342,7 @@ }; ocotp@8002c000 { + compatible = "fsl,ocotp"; reg = <0x8002c000 0x2000>; status = "disabled"; }; @@ -342,6 +364,8 @@ reg = <0x80034000 0x2000>; interrupts = <2 20>; clocks = <&clks 33>; + dmas = <&dma_apbh 2>; + dma-names = "rx-tx"; fsl,ssp-dma-channel = <2>; status = "disabled"; }; @@ -360,13 +384,15 @@ ranges; clks: clkctrl@80040000 { - compatible = "fsl,imx23-clkctrl"; + compatible = "fsl,imx23-clkctrl", "fsl,clkctrl"; reg = <0x80040000 0x2000>; #clock-cells = <1>; }; saif0: saif@80042000 { reg = <0x80042000 0x2000>; + dmas = <&dma_apbx 4>; + dma-names = "rx-tx"; status = "disabled"; }; @@ -377,16 +403,22 @@ saif1: saif@80046000 { reg = <0x80046000 0x2000>; + dmas = <&dma_apbx 10>; + dma-names = "rx-tx"; status = "disabled"; }; audio-out@80048000 { reg = <0x80048000 0x2000>; + dmas = <&dma_apbx 1>; + dma-names = "tx"; status = "disabled"; }; audio-in@8004c000 { reg = <0x8004c000 0x2000>; + dmas = <&dma_apbx 0>; + dma-names = "rx"; status = "disabled"; }; @@ -399,11 +431,15 @@ spdif@80054000 { reg = <0x80054000 2000>; + dmas = <&dma_apbx 2>; + dma-names = "tx"; status = "disabled"; }; i2c@80058000 { reg = <0x80058000 0x2000>; + dmas = <&dma_apbx 3>; + dma-names = "rx-tx"; status = "disabled"; }; @@ -426,6 +462,7 @@ compatible = "fsl,imx23-timrot", "fsl,timrot"; reg = <0x80068000 0x2000>; interrupts = <28 29 30 31>; + clocks = <&clks 28>; }; auart0: serial@8006c000 { @@ -433,6 +470,8 @@ reg = <0x8006c000 0x2000>; interrupts = <24 25 23>; clocks = <&clks 32>; + dmas = <&dma_apbx 6>, <&dma_apbx 7>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -441,6 +480,8 @@ reg = <0x8006e000 0x2000>; interrupts = <59 60 58>; clocks = <&clks 32>; + dmas = <&dma_apbx 8>, <&dma_apbx 9>; + dma-names = "rx", "tx"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx25-karo-tx25.dts b/arch/arm/boot/dts/imx25-karo-tx25.dts index 1a9d0491cdce..f8db366c46ff 100644 --- a/arch/arm/boot/dts/imx25-karo-tx25.dts +++ b/arch/arm/boot/dts/imx25-karo-tx25.dts @@ -10,7 +10,7 @@ */ /dts-v1/; -/include/ "imx25.dtsi" +#include "imx25.dtsi" / { model = "Ka-Ro TX25"; diff --git a/arch/arm/boot/dts/imx25-pdk.dts b/arch/arm/boot/dts/imx25-pdk.dts index a02a860afd18..f607ce520eda 100644 --- a/arch/arm/boot/dts/imx25-pdk.dts +++ b/arch/arm/boot/dts/imx25-pdk.dts @@ -10,7 +10,7 @@ */ /dts-v1/; -/include/ "imx25.dtsi" +#include "imx25.dtsi" / { model = "Freescale i.MX25 Product Development Kit"; diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index 94f33059158a..d2550e0bca24 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -9,7 +9,7 @@ * http://www.gnu.org/copyleft/gpl.html */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" / { aliases { diff --git a/arch/arm/boot/dts/imx27-apf27.dts b/arch/arm/boot/dts/imx27-apf27.dts index b464c807d8d9..ba4c6df08ece 100644 --- a/arch/arm/boot/dts/imx27-apf27.dts +++ b/arch/arm/boot/dts/imx27-apf27.dts @@ -13,7 +13,7 @@ */ /dts-v1/; -/include/ "imx27.dtsi" +#include "imx27.dtsi" / { model = "Armadeus Systems APF27 module"; diff --git a/arch/arm/boot/dts/imx27-apf27dev.dts b/arch/arm/boot/dts/imx27-apf27dev.dts new file mode 100644 index 000000000000..66b8e1c1b0be --- /dev/null +++ b/arch/arm/boot/dts/imx27-apf27dev.dts @@ -0,0 +1,60 @@ +/* + * Copyright 2013 Armadeus Systems - <support@armadeus.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/* APF27Dev is a docking board for the APF27 SOM */ +#include "imx27-apf27.dts" + +/ { + model = "Armadeus Systems APF27Dev docking/development board"; + compatible = "armadeus,imx27-apf27dev", "armadeus,imx27-apf27", "fsl,imx27"; + + gpio-keys { + compatible = "gpio-keys"; + + user-key { + label = "user"; + gpios = <&gpio6 13 0>; + linux,code = <276>; /* BTN_EXTRA */ + }; + }; + + leds { + compatible = "gpio-leds"; + + user { + label = "Heartbeat"; + gpios = <&gpio6 14 0>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&cspi1 { + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio4 28 1>; + status = "okay"; +}; + +&cspi2 { + fsl,spi-num-chipselects = <3>; + cs-gpios = <&gpio4 21 1>, <&gpio4 27 1>, + <&gpio2 17 1>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx27-pdk.dts b/arch/arm/boot/dts/imx27-pdk.dts index 41cd1105608e..5ce89aa275df 100644 --- a/arch/arm/boot/dts/imx27-pdk.dts +++ b/arch/arm/boot/dts/imx27-pdk.dts @@ -10,7 +10,7 @@ */ /dts-v1/; -/include/ "imx27.dtsi" +#include "imx27.dtsi" / { model = "Freescale i.MX27 Product Development Kit"; diff --git a/arch/arm/boot/dts/imx27-phytec-phycore.dts b/arch/arm/boot/dts/imx27-phytec-phycore.dts index 53b0ec0c228e..fe64e3a91df0 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycore.dts +++ b/arch/arm/boot/dts/imx27-phytec-phycore.dts @@ -10,7 +10,7 @@ */ /dts-v1/; -/include/ "imx27.dtsi" +#include "imx27.dtsi" / { model = "Phytec pcm038"; @@ -71,3 +71,9 @@ #size-cells = <1>; }; }; + +&nfc { + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index 5a82cb5707a8..ff4bd4873edf 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -9,7 +9,7 @@ * http://www.gnu.org/copyleft/gpl.html */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" / { aliases { @@ -60,14 +60,41 @@ wdog: wdog@10002000 { compatible = "fsl,imx27-wdt", "fsl,imx21-wdt"; - reg = <0x10002000 0x4000>; + reg = <0x10002000 0x1000>; interrupts = <27>; + clocks = <&clks 0>; + }; + + gpt1: timer@10003000 { + compatible = "fsl,imx27-gpt", "fsl,imx1-gpt"; + reg = <0x10003000 0x1000>; + interrupts = <26>; + clocks = <&clks 46>, <&clks 61>; + clock-names = "ipg", "per"; + }; + + gpt2: timer@10004000 { + compatible = "fsl,imx27-gpt", "fsl,imx1-gpt"; + reg = <0x10004000 0x1000>; + interrupts = <25>; + clocks = <&clks 45>, <&clks 61>; + clock-names = "ipg", "per"; + }; + + gpt3: timer@10005000 { + compatible = "fsl,imx27-gpt", "fsl,imx1-gpt"; + reg = <0x10005000 0x1000>; + interrupts = <24>; + clocks = <&clks 44>, <&clks 61>; + clock-names = "ipg", "per"; }; uart1: serial@1000a000 { compatible = "fsl,imx27-uart", "fsl,imx21-uart"; reg = <0x1000a000 0x1000>; interrupts = <20>; + clocks = <&clks 81>, <&clks 61>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -75,6 +102,8 @@ compatible = "fsl,imx27-uart", "fsl,imx21-uart"; reg = <0x1000b000 0x1000>; interrupts = <19>; + clocks = <&clks 80>, <&clks 61>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -82,6 +111,8 @@ compatible = "fsl,imx27-uart", "fsl,imx21-uart"; reg = <0x1000c000 0x1000>; interrupts = <18>; + clocks = <&clks 79>, <&clks 61>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -89,6 +120,8 @@ compatible = "fsl,imx27-uart", "fsl,imx21-uart"; reg = <0x1000d000 0x1000>; interrupts = <17>; + clocks = <&clks 78>, <&clks 61>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -98,6 +131,8 @@ compatible = "fsl,imx27-cspi"; reg = <0x1000e000 0x1000>; interrupts = <16>; + clocks = <&clks 53>, <&clks 0>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -107,6 +142,8 @@ compatible = "fsl,imx27-cspi"; reg = <0x1000f000 0x1000>; interrupts = <15>; + clocks = <&clks 52>, <&clks 0>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -116,6 +153,7 @@ compatible = "fsl,imx27-i2c", "fsl,imx21-i2c"; reg = <0x10012000 0x1000>; interrupts = <12>; + clocks = <&clks 40>; status = "disabled"; }; @@ -185,13 +223,33 @@ compatible = "fsl,imx27-cspi"; reg = <0x10017000 0x1000>; interrupts = <6>; + clocks = <&clks 51>, <&clks 0>; + clock-names = "ipg", "per"; status = "disabled"; }; + gpt4: timer@10019000 { + compatible = "fsl,imx27-gpt", "fsl,imx1-gpt"; + reg = <0x10019000 0x1000>; + interrupts = <4>; + clocks = <&clks 43>, <&clks 61>; + clock-names = "ipg", "per"; + }; + + gpt5: timer@1001a000 { + compatible = "fsl,imx27-gpt", "fsl,imx1-gpt"; + reg = <0x1001a000 0x1000>; + interrupts = <3>; + clocks = <&clks 42>, <&clks 61>; + clock-names = "ipg", "per"; + }; + uart5: serial@1001b000 { compatible = "fsl,imx27-uart", "fsl,imx21-uart"; reg = <0x1001b000 0x1000>; interrupts = <49>; + clocks = <&clks 77>, <&clks 61>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -199,6 +257,8 @@ compatible = "fsl,imx27-uart", "fsl,imx21-uart"; reg = <0x1001c000 0x1000>; interrupts = <48>; + clocks = <&clks 78>, <&clks 61>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -208,9 +268,17 @@ compatible = "fsl,imx27-i2c", "fsl,imx21-i2c"; reg = <0x1001d000 0x1000>; interrupts = <1>; + clocks = <&clks 39>; status = "disabled"; }; + gpt6: timer@1001f000 { + compatible = "fsl,imx27-gpt", "fsl,imx1-gpt"; + reg = <0x1001f000 0x1000>; + interrupts = <2>; + clocks = <&clks 41>, <&clks 61>; + clock-names = "ipg", "per"; + }; }; aipi@10020000 { /* AIPI2 */ @@ -224,10 +292,19 @@ compatible = "fsl,imx27-fec"; reg = <0x1002b000 0x4000>; interrupts = <50>; + clocks = <&clks 48>, <&clks 67>, <&clks 0>; + clock-names = "ipg", "ahb", "ptp"; status = "disabled"; }; + + clks: ccm@10027000{ + compatible = "fsl,imx27-ccm"; + reg = <0x10027000 0x1000>; + #clock-cells = <1>; + }; }; + nfc: nand@d8000000 { #address-cells = <1>; #size-cells = <1>; @@ -235,6 +312,7 @@ compatible = "fsl,imx27-nand"; reg = <0xd8000000 0x1000>; interrupts = <29>; + clocks = <&clks 54>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/imx28-apf28dev.dts b/arch/arm/boot/dts/imx28-apf28dev.dts index 6d8865bfb4b7..3d905d16cbec 100644 --- a/arch/arm/boot/dts/imx28-apf28dev.dts +++ b/arch/arm/boot/dts/imx28-apf28dev.dts @@ -72,7 +72,32 @@ pinctrl-names = "default"; pinctrl-0 = <&lcdif_16bit_pins_a &lcdif_pins_apf28dev>; + display = <&display>; status = "okay"; + + display: display { + bits-per-pixel = <16>; + bus-width = <16>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <33000033>; + hactive = <800>; + vactive = <480>; + hback-porch = <96>; + hfront-porch = <96>; + vback-porch = <20>; + vfront-porch = <21>; + hsync-len = <64>; + vsync-len = <4>; + hsync-active = <1>; + vsync-active = <1>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; }; }; diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts index 5171667a7763..43bf3c796cba 100644 --- a/arch/arm/boot/dts/imx28-apx4devkit.dts +++ b/arch/arm/boot/dts/imx28-apx4devkit.dts @@ -94,7 +94,32 @@ pinctrl-names = "default"; pinctrl-0 = <&lcdif_24bit_pins_a &lcdif_pins_apx4>; + display = <&display>; status = "okay"; + + display: display { + bits-per-pixel = <32>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <30000000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hfront-porch = <40>; + vback-porch = <32>; + vfront-porch = <13>; + hsync-len = <48>; + vsync-len = <3>; + hsync-active = <1>; + vsync-active = <1>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; }; }; diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts index a0d3e9f1738e..063e62059890 100644 --- a/arch/arm/boot/dts/imx28-cfa10049.dts +++ b/arch/arm/boot/dts/imx28-cfa10049.dts @@ -30,7 +30,6 @@ reg = <0>; fsl,pinmux-ids = < 0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */ - 0x1153 /* MX28_PAD_LCD_D22__GPIO_1_21 */ 0x1163 /* MX28_PAD_LCD_D22__GPIO_1_22 */ 0x1173 /* MX28_PAD_LCD_D22__GPIO_1_23 */ 0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */ @@ -120,13 +119,48 @@ fsl,voltage = <1>; fsl,pull-up = <0>; }; + + w1_gpio_pins: w1-gpio@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x1153 /* MX28_PAD_LCD_D21__GPIO_1_21 */ + >; + fsl,drive-strength = <1>; + fsl,voltage = <1>; + fsl,pull-up = <0>; /* 0 will enable the keeper */ + }; }; lcdif@80030000 { pinctrl-names = "default"; pinctrl-0 = <&lcdif_18bit_pins_cfa10049 &lcdif_pins_cfa10049>; + display = <&display>; status = "okay"; + + display: display { + bits-per-pixel = <32>; + bus-width = <18>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <9216000>; + hactive = <320>; + vactive = <480>; + hback-porch = <2>; + hfront-porch = <2>; + vback-porch = <2>; + vfront-porch = <2>; + hsync-len = <15>; + vsync-len = <15>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; }; }; @@ -183,6 +217,11 @@ usbphy1: usbphy@8007e000 { status = "okay"; }; + + lradc@80050000 { + status = "okay"; + fsl,lradc-touchscreen-wires = <4>; + }; }; }; @@ -304,5 +343,14 @@ pwms = <&pwm 3 5000000>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <6>; + + }; + + onewire@0 { + compatible = "w1-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&w1_gpio_pins>; + status = "okay"; + gpios = <&gpio1 21 0>; }; }; diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index 2da316e04409..3637bf3b1d59 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -123,8 +123,33 @@ pinctrl-names = "default"; pinctrl-0 = <&lcdif_24bit_pins_a &lcdif_pins_evk>; - panel-enable-gpios = <&gpio3 30 0>; + lcd-supply = <®_lcd_3v3>; + display = <&display>; status = "okay"; + + display: display { + bits-per-pixel = <32>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <33500000>; + hactive = <800>; + vactive = <480>; + hback-porch = <89>; + hfront-porch = <164>; + vback-porch = <23>; + vfront-porch = <10>; + hsync-len = <10>; + vsync-len = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; }; can0: can@80032000 { @@ -285,6 +310,15 @@ gpio = <&gpio3 8 0>; enable-active-high; }; + + reg_lcd_3v3: lcd-3v3 { + compatible = "regulator-fixed"; + regulator-name = "lcd-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 30 0>; + enable-active-high; + }; }; sound { diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts index fd36e1cca104..5aa44e05c9f5 100644 --- a/arch/arm/boot/dts/imx28-m28evk.dts +++ b/arch/arm/boot/dts/imx28-m28evk.dts @@ -119,7 +119,32 @@ pinctrl-names = "default"; pinctrl-0 = <&lcdif_24bit_pins_a &lcdif_pins_m28>; + display = <&display>; status = "okay"; + + display: display { + bits-per-pixel = <16>; + bus-width = <18>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <33260000>; + hactive = <800>; + vactive = <480>; + hback-porch = <0>; + hfront-porch = <256>; + vback-porch = <0>; + vfront-porch = <45>; + hsync-len = <1>; + vsync-len = <1>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; }; can0: can@80032000 { @@ -220,6 +245,8 @@ phy-mode = "rmii"; pinctrl-names = "default"; pinctrl-0 = <&mac0_pins_a>; + clocks = <&clks 57>, <&clks 57>; + clock-names = "ipg", "ahb"; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 7ba49662b9bc..600f7cb51f3e 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -61,12 +61,24 @@ hsadc@80002000 { reg = <0x80002000 0x2000>; interrupts = <13 87>; + dmas = <&dma_apbh 12>; + dma-names = "rx"; status = "disabled"; }; - dma-apbh@80004000 { + dma_apbh: dma-apbh@80004000 { compatible = "fsl,imx28-dma-apbh"; reg = <0x80004000 0x2000>; + interrupts = <82 83 84 85 + 88 88 88 88 + 88 88 88 88 + 87 86 0 0>; + interrupt-names = "ssp0", "ssp1", "ssp2", "ssp3", + "gpmi0", "gmpi1", "gpmi2", "gmpi3", + "gpmi4", "gmpi5", "gpmi6", "gmpi7", + "hsadc", "lcdif", "empty", "empty"; + #dma-cells = <1>; + dma-channels = <16>; clocks = <&clks 25>; }; @@ -86,6 +98,8 @@ interrupt-names = "gpmi-dma", "bch"; clocks = <&clks 50>; clock-names = "gpmi_io"; + dmas = <&dma_apbh 4>; + dma-names = "rx-tx"; fsl,gpmi-dma-channel = <4>; status = "disabled"; }; @@ -96,6 +110,8 @@ reg = <0x80010000 0x2000>; interrupts = <96 82>; clocks = <&clks 46>; + dmas = <&dma_apbh 0>; + dma-names = "rx-tx"; fsl,ssp-dma-channel = <0>; status = "disabled"; }; @@ -106,6 +122,8 @@ reg = <0x80012000 0x2000>; interrupts = <97 83>; clocks = <&clks 47>; + dmas = <&dma_apbh 1>; + dma-names = "rx-tx"; fsl,ssp-dma-channel = <1>; status = "disabled"; }; @@ -116,6 +134,8 @@ reg = <0x80014000 0x2000>; interrupts = <98 84>; clocks = <&clks 48>; + dmas = <&dma_apbh 2>; + dma-names = "rx-tx"; fsl,ssp-dma-channel = <2>; status = "disabled"; }; @@ -126,6 +146,8 @@ reg = <0x80016000 0x2000>; interrupts = <99 85>; clocks = <&clks 49>; + dmas = <&dma_apbh 3>; + dma-names = "rx-tx"; fsl,ssp-dma-channel = <3>; status = "disabled"; }; @@ -647,6 +669,7 @@ }; digctl@8001c000 { + compatible = "fsl,imx28-digctl"; reg = <0x8001c000 0x2000>; interrupts = <89>; status = "disabled"; @@ -657,9 +680,19 @@ status = "disabled"; }; - dma-apbx@80024000 { + dma_apbx: dma-apbx@80024000 { compatible = "fsl,imx28-dma-apbx"; reg = <0x80024000 0x2000>; + interrupts = <78 79 66 0 + 80 81 68 69 + 70 71 72 73 + 74 75 76 77>; + interrupt-names = "auart4-rx", "aurat4-tx", "spdif-tx", "empty", + "saif0", "saif1", "i2c0", "i2c1", + "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx", + "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx"; + #dma-cells = <1>; + dma-channels = <16>; clocks = <&clks 26>; }; @@ -676,6 +709,7 @@ }; ocotp@8002c000 { + compatible = "fsl,ocotp"; reg = <0x8002c000 0x2000>; status = "disabled"; }; @@ -690,6 +724,8 @@ reg = <0x80030000 0x2000>; interrupts = <38 86>; clocks = <&clks 55>; + dmas = <&dma_apbh 13>; + dma-names = "rx"; status = "disabled"; }; @@ -755,7 +791,7 @@ ranges; clks: clkctrl@80040000 { - compatible = "fsl,imx28-clkctrl"; + compatible = "fsl,imx28-clkctrl", "fsl,clkctrl"; reg = <0x80040000 0x2000>; #clock-cells = <1>; }; @@ -765,6 +801,8 @@ reg = <0x80042000 0x2000>; interrupts = <59 80>; clocks = <&clks 53>; + dmas = <&dma_apbx 4>; + dma-names = "rx-tx"; fsl,saif-dma-channel = <4>; status = "disabled"; }; @@ -779,6 +817,8 @@ reg = <0x80046000 0x2000>; interrupts = <58 81>; clocks = <&clks 54>; + dmas = <&dma_apbx 5>; + dma-names = "rx-tx"; fsl,saif-dma-channel = <5>; status = "disabled"; }; @@ -794,6 +834,8 @@ spdif@80054000 { reg = <0x80054000 0x2000>; interrupts = <45 66>; + dmas = <&dma_apbx 2>; + dma-names = "tx"; status = "disabled"; }; @@ -810,6 +852,8 @@ reg = <0x80058000 0x2000>; interrupts = <111 68>; clock-frequency = <100000>; + dmas = <&dma_apbx 6>; + dma-names = "rx-tx"; fsl,i2c-dma-channel = <6>; status = "disabled"; }; @@ -821,6 +865,8 @@ reg = <0x8005a000 0x2000>; interrupts = <110 69>; clock-frequency = <100000>; + dmas = <&dma_apbx 7>; + dma-names = "rx-tx"; fsl,i2c-dma-channel = <7>; status = "disabled"; }; @@ -838,12 +884,15 @@ compatible = "fsl,imx28-timrot", "fsl,timrot"; reg = <0x80068000 0x2000>; interrupts = <48 49 50 51>; + clocks = <&clks 26>; }; auart0: serial@8006a000 { compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x8006a000 0x2000>; interrupts = <112 70 71>; + dmas = <&dma_apbx 8>, <&dma_apbx 9>; + dma-names = "rx", "tx"; fsl,auart-dma-channel = <8 9>; clocks = <&clks 45>; status = "disabled"; @@ -853,6 +902,8 @@ compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x8006c000 0x2000>; interrupts = <113 72 73>; + dmas = <&dma_apbx 10>, <&dma_apbx 11>; + dma-names = "rx", "tx"; clocks = <&clks 45>; status = "disabled"; }; @@ -861,6 +912,8 @@ compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x8006e000 0x2000>; interrupts = <114 74 75>; + dmas = <&dma_apbx 12>, <&dma_apbx 13>; + dma-names = "rx", "tx"; clocks = <&clks 45>; status = "disabled"; }; @@ -869,6 +922,8 @@ compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x80070000 0x2000>; interrupts = <115 76 77>; + dmas = <&dma_apbx 14>, <&dma_apbx 15>; + dma-names = "rx", "tx"; clocks = <&clks 45>; status = "disabled"; }; @@ -877,6 +932,8 @@ compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x80072000 0x2000>; interrupts = <116 78 79>; + dmas = <&dma_apbx 0>, <&dma_apbx 1>; + dma-names = "rx", "tx"; clocks = <&clks 45>; status = "disabled"; }; @@ -940,8 +997,8 @@ compatible = "fsl,imx28-fec"; reg = <0x800f0000 0x4000>; interrupts = <101>; - clocks = <&clks 57>, <&clks 57>; - clock-names = "ipg", "ahb"; + clocks = <&clks 57>, <&clks 57>, <&clks 64>; + clock-names = "ipg", "ahb", "enet_out"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx31-bug.dts b/arch/arm/boot/dts/imx31-bug.dts index 9ac6f6ba1d64..2424abfc9c7b 100644 --- a/arch/arm/boot/dts/imx31-bug.dts +++ b/arch/arm/boot/dts/imx31-bug.dts @@ -10,7 +10,7 @@ */ /dts-v1/; -/include/ "imx31.dtsi" +#include "imx31.dtsi" / { model = "Buglabs i.MX31 Bug 1.x"; diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi index 454c2d175402..c5449257ad9a 100644 --- a/arch/arm/boot/dts/imx31.dtsi +++ b/arch/arm/boot/dts/imx31.dtsi @@ -9,7 +9,7 @@ * http://www.gnu.org/copyleft/gpl.html */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" / { aliases { @@ -101,5 +101,21 @@ #clock-cells = <1>; }; }; + + aips@53f00000 { /* AIPS2 */ + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x53f00000 0x100000>; + ranges; + + gpt: timer@53f90000 { + compatible = "fsl,imx31-gpt"; + reg = <0x53f90000 0x4000>; + interrupts = <29>; + clocks = <&clks 10>, <&clks 22>; + clock-names = "ipg", "per"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/imx35-pinfunc.h b/arch/arm/boot/dts/imx35-pinfunc.h new file mode 100644 index 000000000000..4911f2c405fa --- /dev/null +++ b/arch/arm/boot/dts/imx35-pinfunc.h @@ -0,0 +1,970 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __DTS_IMX35_PINFUNC_H +#define __DTS_IMX35_PINFUNC_H + +/* + * The pin function ID is a tuple of + * <mux_reg conf_reg input_reg mux_mode input_val> + */ +#define MX35_PAD_CAPTURE__GPT_CAPIN1 0x004 0x328 0x000 0x0 0x0 +#define MX35_PAD_CAPTURE__GPT_CMPOUT2 0x004 0x328 0x000 0x1 0x0 +#define MX35_PAD_CAPTURE__CSPI2_SS1 0x004 0x328 0x7f4 0x2 0x0 +#define MX35_PAD_CAPTURE__EPIT1_EPITO 0x004 0x328 0x000 0x3 0x0 +#define MX35_PAD_CAPTURE__CCM_CLK32K 0x004 0x328 0x7d0 0x4 0x0 +#define MX35_PAD_CAPTURE__GPIO1_4 0x004 0x328 0x850 0x5 0x0 +#define MX35_PAD_COMPARE__GPT_CMPOUT1 0x008 0x32c 0x000 0x0 0x0 +#define MX35_PAD_COMPARE__GPT_CAPIN2 0x008 0x32c 0x000 0x1 0x0 +#define MX35_PAD_COMPARE__GPT_CMPOUT3 0x008 0x32c 0x000 0x2 0x0 +#define MX35_PAD_COMPARE__EPIT2_EPITO 0x008 0x32c 0x000 0x3 0x0 +#define MX35_PAD_COMPARE__GPIO1_5 0x008 0x32c 0x854 0x5 0x0 +#define MX35_PAD_COMPARE__SDMA_EXTDMA_2 0x008 0x32c 0x000 0x7 0x0 +#define MX35_PAD_WDOG_RST__WDOG_WDOG_B 0x00c 0x330 0x000 0x0 0x0 +#define MX35_PAD_WDOG_RST__IPU_FLASH_STROBE 0x00c 0x330 0x000 0x3 0x0 +#define MX35_PAD_WDOG_RST__GPIO1_6 0x00c 0x330 0x858 0x5 0x0 +#define MX35_PAD_GPIO1_0__GPIO1_0 0x010 0x334 0x82c 0x0 0x0 +#define MX35_PAD_GPIO1_0__CCM_PMIC_RDY 0x010 0x334 0x7d4 0x1 0x0 +#define MX35_PAD_GPIO1_0__OWIRE_LINE 0x010 0x334 0x990 0x2 0x0 +#define MX35_PAD_GPIO1_0__SDMA_EXTDMA_0 0x010 0x334 0x000 0x7 0x0 +#define MX35_PAD_GPIO1_1__GPIO1_1 0x014 0x338 0x838 0x0 0x0 +#define MX35_PAD_GPIO1_1__PWM_PWMO 0x014 0x338 0x000 0x2 0x0 +#define MX35_PAD_GPIO1_1__CSPI1_SS2 0x014 0x338 0x7d8 0x3 0x0 +#define MX35_PAD_GPIO1_1__SCC_TAMPER_DETECT 0x014 0x338 0x000 0x6 0x0 +#define MX35_PAD_GPIO1_1__SDMA_EXTDMA_1 0x014 0x338 0x000 0x7 0x0 +#define MX35_PAD_GPIO2_0__GPIO2_0 0x018 0x33c 0x868 0x0 0x0 +#define MX35_PAD_GPIO2_0__USB_TOP_USBOTG_CLK 0x018 0x33c 0x000 0x1 0x0 +#define MX35_PAD_GPIO3_0__GPIO3_0 0x01c 0x340 0x8e8 0x0 0x0 +#define MX35_PAD_GPIO3_0__USB_TOP_USBH2_CLK 0x01c 0x340 0x000 0x1 0x0 +#define MX35_PAD_RESET_IN_B__CCM_RESET_IN_B 0x000 0x344 0x000 0x0 0x0 +#define MX35_PAD_POR_B__CCM_POR_B 0x000 0x348 0x000 0x0 0x0 +#define MX35_PAD_CLKO__CCM_CLKO 0x020 0x34c 0x000 0x0 0x0 +#define MX35_PAD_CLKO__GPIO1_8 0x020 0x34c 0x860 0x5 0x0 +#define MX35_PAD_BOOT_MODE0__CCM_BOOT_MODE_0 0x000 0x350 0x000 0x0 0x0 +#define MX35_PAD_BOOT_MODE1__CCM_BOOT_MODE_1 0x000 0x354 0x000 0x0 0x0 +#define MX35_PAD_CLK_MODE0__CCM_CLK_MODE_0 0x000 0x358 0x000 0x0 0x0 +#define MX35_PAD_CLK_MODE1__CCM_CLK_MODE_1 0x000 0x35c 0x000 0x0 0x0 +#define MX35_PAD_POWER_FAIL__CCM_DSM_WAKEUP_INT_26 0x000 0x360 0x000 0x0 0x0 +#define MX35_PAD_VSTBY__CCM_VSTBY 0x024 0x364 0x000 0x0 0x0 +#define MX35_PAD_VSTBY__GPIO1_7 0x024 0x364 0x85c 0x5 0x0 +#define MX35_PAD_A0__EMI_EIM_DA_L_0 0x028 0x368 0x000 0x0 0x0 +#define MX35_PAD_A1__EMI_EIM_DA_L_1 0x02c 0x36c 0x000 0x0 0x0 +#define MX35_PAD_A2__EMI_EIM_DA_L_2 0x030 0x370 0x000 0x0 0x0 +#define MX35_PAD_A3__EMI_EIM_DA_L_3 0x034 0x374 0x000 0x0 0x0 +#define MX35_PAD_A4__EMI_EIM_DA_L_4 0x038 0x378 0x000 0x0 0x0 +#define MX35_PAD_A5__EMI_EIM_DA_L_5 0x03c 0x37c 0x000 0x0 0x0 +#define MX35_PAD_A6__EMI_EIM_DA_L_6 0x040 0x380 0x000 0x0 0x0 +#define MX35_PAD_A7__EMI_EIM_DA_L_7 0x044 0x384 0x000 0x0 0x0 +#define MX35_PAD_A8__EMI_EIM_DA_H_8 0x048 0x388 0x000 0x0 0x0 +#define MX35_PAD_A9__EMI_EIM_DA_H_9 0x04c 0x38c 0x000 0x0 0x0 +#define MX35_PAD_A10__EMI_EIM_DA_H_10 0x050 0x390 0x000 0x0 0x0 +#define MX35_PAD_MA10__EMI_MA10 0x054 0x394 0x000 0x0 0x0 +#define MX35_PAD_A11__EMI_EIM_DA_H_11 0x058 0x398 0x000 0x0 0x0 +#define MX35_PAD_A12__EMI_EIM_DA_H_12 0x05c 0x39c 0x000 0x0 0x0 +#define MX35_PAD_A13__EMI_EIM_DA_H_13 0x060 0x3a0 0x000 0x0 0x0 +#define MX35_PAD_A14__EMI_EIM_DA_H2_14 0x064 0x3a4 0x000 0x0 0x0 +#define MX35_PAD_A15__EMI_EIM_DA_H2_15 0x068 0x3a8 0x000 0x0 0x0 +#define MX35_PAD_A16__EMI_EIM_A_16 0x06c 0x3ac 0x000 0x0 0x0 +#define MX35_PAD_A17__EMI_EIM_A_17 0x070 0x3b0 0x000 0x0 0x0 +#define MX35_PAD_A18__EMI_EIM_A_18 0x074 0x3b4 0x000 0x0 0x0 +#define MX35_PAD_A19__EMI_EIM_A_19 0x078 0x3b8 0x000 0x0 0x0 +#define MX35_PAD_A20__EMI_EIM_A_20 0x07c 0x3bc 0x000 0x0 0x0 +#define MX35_PAD_A21__EMI_EIM_A_21 0x080 0x3c0 0x000 0x0 0x0 +#define MX35_PAD_A22__EMI_EIM_A_22 0x084 0x3c4 0x000 0x0 0x0 +#define MX35_PAD_A23__EMI_EIM_A_23 0x088 0x3c8 0x000 0x0 0x0 +#define MX35_PAD_A24__EMI_EIM_A_24 0x08c 0x3cc 0x000 0x0 0x0 +#define MX35_PAD_A25__EMI_EIM_A_25 0x090 0x3d0 0x000 0x0 0x0 +#define MX35_PAD_SDBA1__EMI_EIM_SDBA1 0x000 0x3d4 0x000 0x0 0x0 +#define MX35_PAD_SDBA0__EMI_EIM_SDBA0 0x000 0x3d8 0x000 0x0 0x0 +#define MX35_PAD_SD0__EMI_DRAM_D_0 0x000 0x3dc 0x000 0x0 0x0 +#define MX35_PAD_SD1__EMI_DRAM_D_1 0x000 0x3e0 0x000 0x0 0x0 +#define MX35_PAD_SD2__EMI_DRAM_D_2 0x000 0x3e4 0x000 0x0 0x0 +#define MX35_PAD_SD3__EMI_DRAM_D_3 0x000 0x3e8 0x000 0x0 0x0 +#define MX35_PAD_SD4__EMI_DRAM_D_4 0x000 0x3ec 0x000 0x0 0x0 +#define MX35_PAD_SD5__EMI_DRAM_D_5 0x000 0x3f0 0x000 0x0 0x0 +#define MX35_PAD_SD6__EMI_DRAM_D_6 0x000 0x3f4 0x000 0x0 0x0 +#define MX35_PAD_SD7__EMI_DRAM_D_7 0x000 0x3f8 0x000 0x0 0x0 +#define MX35_PAD_SD8__EMI_DRAM_D_8 0x000 0x3fc 0x000 0x0 0x0 +#define MX35_PAD_SD9__EMI_DRAM_D_9 0x000 0x400 0x000 0x0 0x0 +#define MX35_PAD_SD10__EMI_DRAM_D_10 0x000 0x404 0x000 0x0 0x0 +#define MX35_PAD_SD11__EMI_DRAM_D_11 0x000 0x408 0x000 0x0 0x0 +#define MX35_PAD_SD12__EMI_DRAM_D_12 0x000 0x40c 0x000 0x0 0x0 +#define MX35_PAD_SD13__EMI_DRAM_D_13 0x000 0x410 0x000 0x0 0x0 +#define MX35_PAD_SD14__EMI_DRAM_D_14 0x000 0x414 0x000 0x0 0x0 +#define MX35_PAD_SD15__EMI_DRAM_D_15 0x000 0x418 0x000 0x0 0x0 +#define MX35_PAD_SD16__EMI_DRAM_D_16 0x000 0x41c 0x000 0x0 0x0 +#define MX35_PAD_SD17__EMI_DRAM_D_17 0x000 0x420 0x000 0x0 0x0 +#define MX35_PAD_SD18__EMI_DRAM_D_18 0x000 0x424 0x000 0x0 0x0 +#define MX35_PAD_SD19__EMI_DRAM_D_19 0x000 0x428 0x000 0x0 0x0 +#define MX35_PAD_SD20__EMI_DRAM_D_20 0x000 0x42c 0x000 0x0 0x0 +#define MX35_PAD_SD21__EMI_DRAM_D_21 0x000 0x430 0x000 0x0 0x0 +#define MX35_PAD_SD22__EMI_DRAM_D_22 0x000 0x434 0x000 0x0 0x0 +#define MX35_PAD_SD23__EMI_DRAM_D_23 0x000 0x438 0x000 0x0 0x0 +#define MX35_PAD_SD24__EMI_DRAM_D_24 0x000 0x43c 0x000 0x0 0x0 +#define MX35_PAD_SD25__EMI_DRAM_D_25 0x000 0x440 0x000 0x0 0x0 +#define MX35_PAD_SD26__EMI_DRAM_D_26 0x000 0x444 0x000 0x0 0x0 +#define MX35_PAD_SD27__EMI_DRAM_D_27 0x000 0x448 0x000 0x0 0x0 +#define MX35_PAD_SD28__EMI_DRAM_D_28 0x000 0x44c 0x000 0x0 0x0 +#define MX35_PAD_SD29__EMI_DRAM_D_29 0x000 0x450 0x000 0x0 0x0 +#define MX35_PAD_SD30__EMI_DRAM_D_30 0x000 0x454 0x000 0x0 0x0 +#define MX35_PAD_SD31__EMI_DRAM_D_31 0x000 0x458 0x000 0x0 0x0 +#define MX35_PAD_DQM0__EMI_DRAM_DQM_0 0x000 0x45c 0x000 0x0 0x0 +#define MX35_PAD_DQM1__EMI_DRAM_DQM_1 0x000 0x460 0x000 0x0 0x0 +#define MX35_PAD_DQM2__EMI_DRAM_DQM_2 0x000 0x464 0x000 0x0 0x0 +#define MX35_PAD_DQM3__EMI_DRAM_DQM_3 0x000 0x468 0x000 0x0 0x0 +#define MX35_PAD_EB0__EMI_EIM_EB0_B 0x094 0x46c 0x000 0x0 0x0 +#define MX35_PAD_EB1__EMI_EIM_EB1_B 0x098 0x470 0x000 0x0 0x0 +#define MX35_PAD_OE__EMI_EIM_OE 0x09c 0x474 0x000 0x0 0x0 +#define MX35_PAD_CS0__EMI_EIM_CS0 0x0a0 0x478 0x000 0x0 0x0 +#define MX35_PAD_CS1__EMI_EIM_CS1 0x0a4 0x47c 0x000 0x0 0x0 +#define MX35_PAD_CS1__EMI_NANDF_CE3 0x0a4 0x47c 0x000 0x3 0x0 +#define MX35_PAD_CS2__EMI_EIM_CS2 0x0a8 0x480 0x000 0x0 0x0 +#define MX35_PAD_CS3__EMI_EIM_CS3 0x0ac 0x484 0x000 0x0 0x0 +#define MX35_PAD_CS4__EMI_EIM_CS4 0x0b0 0x488 0x000 0x0 0x0 +#define MX35_PAD_CS4__EMI_DTACK_B 0x0b0 0x488 0x800 0x1 0x0 +#define MX35_PAD_CS4__EMI_NANDF_CE1 0x0b0 0x488 0x000 0x3 0x0 +#define MX35_PAD_CS4__GPIO1_20 0x0b0 0x488 0x83c 0x5 0x0 +#define MX35_PAD_CS5__EMI_EIM_CS5 0x0b4 0x48c 0x000 0x0 0x0 +#define MX35_PAD_CS5__CSPI2_SS2 0x0b4 0x48c 0x7f8 0x1 0x0 +#define MX35_PAD_CS5__CSPI1_SS2 0x0b4 0x48c 0x7d8 0x2 0x1 +#define MX35_PAD_CS5__EMI_NANDF_CE2 0x0b4 0x48c 0x000 0x3 0x0 +#define MX35_PAD_CS5__GPIO1_21 0x0b4 0x48c 0x840 0x5 0x0 +#define MX35_PAD_NF_CE0__EMI_NANDF_CE0 0x0b8 0x490 0x000 0x0 0x0 +#define MX35_PAD_NF_CE0__GPIO1_22 0x0b8 0x490 0x844 0x5 0x0 +#define MX35_PAD_ECB__EMI_EIM_ECB 0x000 0x494 0x000 0x0 0x0 +#define MX35_PAD_LBA__EMI_EIM_LBA 0x0bc 0x498 0x000 0x0 0x0 +#define MX35_PAD_BCLK__EMI_EIM_BCLK 0x0c0 0x49c 0x000 0x0 0x0 +#define MX35_PAD_RW__EMI_EIM_RW 0x0c4 0x4a0 0x000 0x0 0x0 +#define MX35_PAD_RAS__EMI_DRAM_RAS 0x000 0x4a4 0x000 0x0 0x0 +#define MX35_PAD_CAS__EMI_DRAM_CAS 0x000 0x4a8 0x000 0x0 0x0 +#define MX35_PAD_SDWE__EMI_DRAM_SDWE 0x000 0x4ac 0x000 0x0 0x0 +#define MX35_PAD_SDCKE0__EMI_DRAM_SDCKE_0 0x000 0x4b0 0x000 0x0 0x0 +#define MX35_PAD_SDCKE1__EMI_DRAM_SDCKE_1 0x000 0x4b4 0x000 0x0 0x0 +#define MX35_PAD_SDCLK__EMI_DRAM_SDCLK 0x000 0x4b8 0x000 0x0 0x0 +#define MX35_PAD_SDQS0__EMI_DRAM_SDQS_0 0x000 0x4bc 0x000 0x0 0x0 +#define MX35_PAD_SDQS1__EMI_DRAM_SDQS_1 0x000 0x4c0 0x000 0x0 0x0 +#define MX35_PAD_SDQS2__EMI_DRAM_SDQS_2 0x000 0x4c4 0x000 0x0 0x0 +#define MX35_PAD_SDQS3__EMI_DRAM_SDQS_3 0x000 0x4c8 0x000 0x0 0x0 +#define MX35_PAD_NFWE_B__EMI_NANDF_WE_B 0x0c8 0x4cc 0x000 0x0 0x0 +#define MX35_PAD_NFWE_B__USB_TOP_USBH2_DATA_3 0x0c8 0x4cc 0x9d8 0x1 0x0 +#define MX35_PAD_NFWE_B__IPU_DISPB_D0_VSYNC 0x0c8 0x4cc 0x924 0x2 0x0 +#define MX35_PAD_NFWE_B__GPIO2_18 0x0c8 0x4cc 0x88c 0x5 0x0 +#define MX35_PAD_NFWE_B__ARM11P_TOP_TRACE_0 0x0c8 0x4cc 0x000 0x7 0x0 +#define MX35_PAD_NFRE_B__EMI_NANDF_RE_B 0x0cc 0x4d0 0x000 0x0 0x0 +#define MX35_PAD_NFRE_B__USB_TOP_USBH2_DIR 0x0cc 0x4d0 0x9ec 0x1 0x0 +#define MX35_PAD_NFRE_B__IPU_DISPB_BCLK 0x0cc 0x4d0 0x000 0x2 0x0 +#define MX35_PAD_NFRE_B__GPIO2_19 0x0cc 0x4d0 0x890 0x5 0x0 +#define MX35_PAD_NFRE_B__ARM11P_TOP_TRACE_1 0x0cc 0x4d0 0x000 0x7 0x0 +#define MX35_PAD_NFALE__EMI_NANDF_ALE 0x0d0 0x4d4 0x000 0x0 0x0 +#define MX35_PAD_NFALE__USB_TOP_USBH2_STP 0x0d0 0x4d4 0x000 0x1 0x0 +#define MX35_PAD_NFALE__IPU_DISPB_CS0 0x0d0 0x4d4 0x000 0x2 0x0 +#define MX35_PAD_NFALE__GPIO2_20 0x0d0 0x4d4 0x898 0x5 0x0 +#define MX35_PAD_NFALE__ARM11P_TOP_TRACE_2 0x0d0 0x4d4 0x000 0x7 0x0 +#define MX35_PAD_NFCLE__EMI_NANDF_CLE 0x0d4 0x4d8 0x000 0x0 0x0 +#define MX35_PAD_NFCLE__USB_TOP_USBH2_NXT 0x0d4 0x4d8 0x9f0 0x1 0x0 +#define MX35_PAD_NFCLE__IPU_DISPB_PAR_RS 0x0d4 0x4d8 0x000 0x2 0x0 +#define MX35_PAD_NFCLE__GPIO2_21 0x0d4 0x4d8 0x89c 0x5 0x0 +#define MX35_PAD_NFCLE__ARM11P_TOP_TRACE_3 0x0d4 0x4d8 0x000 0x7 0x0 +#define MX35_PAD_NFWP_B__EMI_NANDF_WP_B 0x0d8 0x4dc 0x000 0x0 0x0 +#define MX35_PAD_NFWP_B__USB_TOP_USBH2_DATA_7 0x0d8 0x4dc 0x9e8 0x1 0x0 +#define MX35_PAD_NFWP_B__IPU_DISPB_WR 0x0d8 0x4dc 0x000 0x2 0x0 +#define MX35_PAD_NFWP_B__GPIO2_22 0x0d8 0x4dc 0x8a0 0x5 0x0 +#define MX35_PAD_NFWP_B__ARM11P_TOP_TRCTL 0x0d8 0x4dc 0x000 0x7 0x0 +#define MX35_PAD_NFRB__EMI_NANDF_RB 0x0dc 0x4e0 0x000 0x0 0x0 +#define MX35_PAD_NFRB__IPU_DISPB_RD 0x0dc 0x4e0 0x000 0x2 0x0 +#define MX35_PAD_NFRB__GPIO2_23 0x0dc 0x4e0 0x8a4 0x5 0x0 +#define MX35_PAD_NFRB__ARM11P_TOP_TRCLK 0x0dc 0x4e0 0x000 0x7 0x0 +#define MX35_PAD_D15__EMI_EIM_D_15 0x000 0x4e4 0x000 0x0 0x0 +#define MX35_PAD_D14__EMI_EIM_D_14 0x000 0x4e8 0x000 0x0 0x0 +#define MX35_PAD_D13__EMI_EIM_D_13 0x000 0x4ec 0x000 0x0 0x0 +#define MX35_PAD_D12__EMI_EIM_D_12 0x000 0x4f0 0x000 0x0 0x0 +#define MX35_PAD_D11__EMI_EIM_D_11 0x000 0x4f4 0x000 0x0 0x0 +#define MX35_PAD_D10__EMI_EIM_D_10 0x000 0x4f8 0x000 0x0 0x0 +#define MX35_PAD_D9__EMI_EIM_D_9 0x000 0x4fc 0x000 0x0 0x0 +#define MX35_PAD_D8__EMI_EIM_D_8 0x000 0x500 0x000 0x0 0x0 +#define MX35_PAD_D7__EMI_EIM_D_7 0x000 0x504 0x000 0x0 0x0 +#define MX35_PAD_D6__EMI_EIM_D_6 0x000 0x508 0x000 0x0 0x0 +#define MX35_PAD_D5__EMI_EIM_D_5 0x000 0x50c 0x000 0x0 0x0 +#define MX35_PAD_D4__EMI_EIM_D_4 0x000 0x510 0x000 0x0 0x0 +#define MX35_PAD_D3__EMI_EIM_D_3 0x000 0x514 0x000 0x0 0x0 +#define MX35_PAD_D2__EMI_EIM_D_2 0x000 0x518 0x000 0x0 0x0 +#define MX35_PAD_D1__EMI_EIM_D_1 0x000 0x51c 0x000 0x0 0x0 +#define MX35_PAD_D0__EMI_EIM_D_0 0x000 0x520 0x000 0x0 0x0 +#define MX35_PAD_CSI_D8__IPU_CSI_D_8 0x0e0 0x524 0x000 0x0 0x0 +#define MX35_PAD_CSI_D8__KPP_COL_0 0x0e0 0x524 0x950 0x1 0x0 +#define MX35_PAD_CSI_D8__GPIO1_20 0x0e0 0x524 0x83c 0x5 0x1 +#define MX35_PAD_CSI_D8__ARM11P_TOP_EVNTBUS_13 0x0e0 0x524 0x000 0x7 0x0 +#define MX35_PAD_CSI_D9__IPU_CSI_D_9 0x0e4 0x528 0x000 0x0 0x0 +#define MX35_PAD_CSI_D9__KPP_COL_1 0x0e4 0x528 0x954 0x1 0x0 +#define MX35_PAD_CSI_D9__GPIO1_21 0x0e4 0x528 0x840 0x5 0x1 +#define MX35_PAD_CSI_D9__ARM11P_TOP_EVNTBUS_14 0x0e4 0x528 0x000 0x7 0x0 +#define MX35_PAD_CSI_D10__IPU_CSI_D_10 0x0e8 0x52c 0x000 0x0 0x0 +#define MX35_PAD_CSI_D10__KPP_COL_2 0x0e8 0x52c 0x958 0x1 0x0 +#define MX35_PAD_CSI_D10__GPIO1_22 0x0e8 0x52c 0x844 0x5 0x1 +#define MX35_PAD_CSI_D10__ARM11P_TOP_EVNTBUS_15 0x0e8 0x52c 0x000 0x7 0x0 +#define MX35_PAD_CSI_D11__IPU_CSI_D_11 0x0ec 0x530 0x000 0x0 0x0 +#define MX35_PAD_CSI_D11__KPP_COL_3 0x0ec 0x530 0x95c 0x1 0x0 +#define MX35_PAD_CSI_D11__GPIO1_23 0x0ec 0x530 0x000 0x5 0x0 +#define MX35_PAD_CSI_D12__IPU_CSI_D_12 0x0f0 0x534 0x000 0x0 0x0 +#define MX35_PAD_CSI_D12__KPP_ROW_0 0x0f0 0x534 0x970 0x1 0x0 +#define MX35_PAD_CSI_D12__GPIO1_24 0x0f0 0x534 0x000 0x5 0x0 +#define MX35_PAD_CSI_D13__IPU_CSI_D_13 0x0f4 0x538 0x000 0x0 0x0 +#define MX35_PAD_CSI_D13__KPP_ROW_1 0x0f4 0x538 0x974 0x1 0x0 +#define MX35_PAD_CSI_D13__GPIO1_25 0x0f4 0x538 0x000 0x5 0x0 +#define MX35_PAD_CSI_D14__IPU_CSI_D_14 0x0f8 0x53c 0x000 0x0 0x0 +#define MX35_PAD_CSI_D14__KPP_ROW_2 0x0f8 0x53c 0x978 0x1 0x0 +#define MX35_PAD_CSI_D14__GPIO1_26 0x0f8 0x53c 0x000 0x5 0x0 +#define MX35_PAD_CSI_D15__IPU_CSI_D_15 0x0fc 0x540 0x97c 0x0 0x0 +#define MX35_PAD_CSI_D15__KPP_ROW_3 0x0fc 0x540 0x000 0x1 0x0 +#define MX35_PAD_CSI_D15__GPIO1_27 0x0fc 0x540 0x000 0x5 0x0 +#define MX35_PAD_CSI_MCLK__IPU_CSI_MCLK 0x100 0x544 0x000 0x0 0x0 +#define MX35_PAD_CSI_MCLK__GPIO1_28 0x100 0x544 0x000 0x5 0x0 +#define MX35_PAD_CSI_VSYNC__IPU_CSI_VSYNC 0x104 0x548 0x000 0x0 0x0 +#define MX35_PAD_CSI_VSYNC__GPIO1_29 0x104 0x548 0x000 0x5 0x0 +#define MX35_PAD_CSI_HSYNC__IPU_CSI_HSYNC 0x108 0x54c 0x000 0x0 0x0 +#define MX35_PAD_CSI_HSYNC__GPIO1_30 0x108 0x54c 0x000 0x5 0x0 +#define MX35_PAD_CSI_PIXCLK__IPU_CSI_PIXCLK 0x10c 0x550 0x000 0x0 0x0 +#define MX35_PAD_CSI_PIXCLK__GPIO1_31 0x10c 0x550 0x000 0x5 0x0 +#define MX35_PAD_I2C1_CLK__I2C1_SCL 0x110 0x554 0x000 0x0 0x0 +#define MX35_PAD_I2C1_CLK__GPIO2_24 0x110 0x554 0x8a8 0x5 0x0 +#define MX35_PAD_I2C1_CLK__CCM_USB_BYP_CLK 0x110 0x554 0x000 0x6 0x0 +#define MX35_PAD_I2C1_DAT__I2C1_SDA 0x114 0x558 0x000 0x0 0x0 +#define MX35_PAD_I2C1_DAT__GPIO2_25 0x114 0x558 0x8ac 0x5 0x0 +#define MX35_PAD_I2C2_CLK__I2C2_SCL 0x118 0x55c 0x000 0x0 0x0 +#define MX35_PAD_I2C2_CLK__CAN1_TXCAN 0x118 0x55c 0x000 0x1 0x0 +#define MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR 0x118 0x55c 0x000 0x2 0x0 +#define MX35_PAD_I2C2_CLK__GPIO2_26 0x118 0x55c 0x8b0 0x5 0x0 +#define MX35_PAD_I2C2_CLK__SDMA_DEBUG_BUS_DEVICE_2 0x118 0x55c 0x000 0x6 0x0 +#define MX35_PAD_I2C2_DAT__I2C2_SDA 0x11c 0x560 0x000 0x0 0x0 +#define MX35_PAD_I2C2_DAT__CAN1_RXCAN 0x11c 0x560 0x7c8 0x1 0x0 +#define MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC 0x11c 0x560 0x9f4 0x2 0x0 +#define MX35_PAD_I2C2_DAT__GPIO2_27 0x11c 0x560 0x8b4 0x5 0x0 +#define MX35_PAD_I2C2_DAT__SDMA_DEBUG_BUS_DEVICE_3 0x11c 0x560 0x000 0x6 0x0 +#define MX35_PAD_STXD4__AUDMUX_AUD4_TXD 0x120 0x564 0x000 0x0 0x0 +#define MX35_PAD_STXD4__GPIO2_28 0x120 0x564 0x8b8 0x5 0x0 +#define MX35_PAD_STXD4__ARM11P_TOP_ARM_COREASID0 0x120 0x564 0x000 0x7 0x0 +#define MX35_PAD_SRXD4__AUDMUX_AUD4_RXD 0x124 0x568 0x000 0x0 0x0 +#define MX35_PAD_SRXD4__GPIO2_29 0x124 0x568 0x8bc 0x5 0x0 +#define MX35_PAD_SRXD4__ARM11P_TOP_ARM_COREASID1 0x124 0x568 0x000 0x7 0x0 +#define MX35_PAD_SCK4__AUDMUX_AUD4_TXC 0x128 0x56c 0x000 0x0 0x0 +#define MX35_PAD_SCK4__GPIO2_30 0x128 0x56c 0x8c4 0x5 0x0 +#define MX35_PAD_SCK4__ARM11P_TOP_ARM_COREASID2 0x128 0x56c 0x000 0x7 0x0 +#define MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS 0x12c 0x570 0x000 0x0 0x0 +#define MX35_PAD_STXFS4__GPIO2_31 0x12c 0x570 0x8c8 0x5 0x0 +#define MX35_PAD_STXFS4__ARM11P_TOP_ARM_COREASID3 0x12c 0x570 0x000 0x7 0x0 +#define MX35_PAD_STXD5__AUDMUX_AUD5_TXD 0x130 0x574 0x000 0x0 0x0 +#define MX35_PAD_STXD5__SPDIF_SPDIF_OUT1 0x130 0x574 0x000 0x1 0x0 +#define MX35_PAD_STXD5__CSPI2_MOSI 0x130 0x574 0x7ec 0x2 0x0 +#define MX35_PAD_STXD5__GPIO1_0 0x130 0x574 0x82c 0x5 0x1 +#define MX35_PAD_STXD5__ARM11P_TOP_ARM_COREASID4 0x130 0x574 0x000 0x7 0x0 +#define MX35_PAD_SRXD5__AUDMUX_AUD5_RXD 0x134 0x578 0x000 0x0 0x0 +#define MX35_PAD_SRXD5__SPDIF_SPDIF_IN1 0x134 0x578 0x998 0x1 0x0 +#define MX35_PAD_SRXD5__CSPI2_MISO 0x134 0x578 0x7e8 0x2 0x0 +#define MX35_PAD_SRXD5__GPIO1_1 0x134 0x578 0x838 0x5 0x1 +#define MX35_PAD_SRXD5__ARM11P_TOP_ARM_COREASID5 0x134 0x578 0x000 0x7 0x0 +#define MX35_PAD_SCK5__AUDMUX_AUD5_TXC 0x138 0x57c 0x000 0x0 0x0 +#define MX35_PAD_SCK5__SPDIF_SPDIF_EXTCLK 0x138 0x57c 0x994 0x1 0x0 +#define MX35_PAD_SCK5__CSPI2_SCLK 0x138 0x57c 0x7e0 0x2 0x0 +#define MX35_PAD_SCK5__GPIO1_2 0x138 0x57c 0x848 0x5 0x0 +#define MX35_PAD_SCK5__ARM11P_TOP_ARM_COREASID6 0x138 0x57c 0x000 0x7 0x0 +#define MX35_PAD_STXFS5__AUDMUX_AUD5_TXFS 0x13c 0x580 0x000 0x0 0x0 +#define MX35_PAD_STXFS5__CSPI2_RDY 0x13c 0x580 0x7e4 0x2 0x0 +#define MX35_PAD_STXFS5__GPIO1_3 0x13c 0x580 0x84c 0x5 0x0 +#define MX35_PAD_STXFS5__ARM11P_TOP_ARM_COREASID7 0x13c 0x580 0x000 0x7 0x0 +#define MX35_PAD_SCKR__ESAI_SCKR 0x140 0x584 0x000 0x0 0x0 +#define MX35_PAD_SCKR__GPIO1_4 0x140 0x584 0x850 0x5 0x1 +#define MX35_PAD_SCKR__ARM11P_TOP_EVNTBUS_10 0x140 0x584 0x000 0x7 0x0 +#define MX35_PAD_FSR__ESAI_FSR 0x144 0x588 0x000 0x0 0x0 +#define MX35_PAD_FSR__GPIO1_5 0x144 0x588 0x854 0x5 0x1 +#define MX35_PAD_FSR__ARM11P_TOP_EVNTBUS_11 0x144 0x588 0x000 0x7 0x0 +#define MX35_PAD_HCKR__ESAI_HCKR 0x148 0x58c 0x000 0x0 0x0 +#define MX35_PAD_HCKR__AUDMUX_AUD5_RXFS 0x148 0x58c 0x000 0x1 0x0 +#define MX35_PAD_HCKR__CSPI2_SS0 0x148 0x58c 0x7f0 0x2 0x0 +#define MX35_PAD_HCKR__IPU_FLASH_STROBE 0x148 0x58c 0x000 0x3 0x0 +#define MX35_PAD_HCKR__GPIO1_6 0x148 0x58c 0x858 0x5 0x1 +#define MX35_PAD_HCKR__ARM11P_TOP_EVNTBUS_12 0x148 0x58c 0x000 0x7 0x0 +#define MX35_PAD_SCKT__ESAI_SCKT 0x14c 0x590 0x000 0x0 0x0 +#define MX35_PAD_SCKT__GPIO1_7 0x14c 0x590 0x85c 0x5 0x1 +#define MX35_PAD_SCKT__IPU_CSI_D_0 0x14c 0x590 0x930 0x6 0x0 +#define MX35_PAD_SCKT__KPP_ROW_2 0x14c 0x590 0x978 0x7 0x1 +#define MX35_PAD_FST__ESAI_FST 0x150 0x594 0x000 0x0 0x0 +#define MX35_PAD_FST__GPIO1_8 0x150 0x594 0x860 0x5 0x1 +#define MX35_PAD_FST__IPU_CSI_D_1 0x150 0x594 0x934 0x6 0x0 +#define MX35_PAD_FST__KPP_ROW_3 0x150 0x594 0x97c 0x7 0x1 +#define MX35_PAD_HCKT__ESAI_HCKT 0x154 0x598 0x000 0x0 0x0 +#define MX35_PAD_HCKT__AUDMUX_AUD5_RXC 0x154 0x598 0x7a8 0x1 0x0 +#define MX35_PAD_HCKT__GPIO1_9 0x154 0x598 0x864 0x5 0x0 +#define MX35_PAD_HCKT__IPU_CSI_D_2 0x154 0x598 0x938 0x6 0x0 +#define MX35_PAD_HCKT__KPP_COL_3 0x154 0x598 0x95c 0x7 0x1 +#define MX35_PAD_TX5_RX0__ESAI_TX5_RX0 0x158 0x59c 0x000 0x0 0x0 +#define MX35_PAD_TX5_RX0__AUDMUX_AUD4_RXC 0x158 0x59c 0x000 0x1 0x0 +#define MX35_PAD_TX5_RX0__CSPI2_SS2 0x158 0x59c 0x7f8 0x2 0x1 +#define MX35_PAD_TX5_RX0__CAN2_TXCAN 0x158 0x59c 0x000 0x3 0x0 +#define MX35_PAD_TX5_RX0__UART2_DTR 0x158 0x59c 0x000 0x4 0x0 +#define MX35_PAD_TX5_RX0__GPIO1_10 0x158 0x59c 0x830 0x5 0x0 +#define MX35_PAD_TX5_RX0__EMI_M3IF_CHOSEN_MASTER_0 0x158 0x59c 0x000 0x7 0x0 +#define MX35_PAD_TX4_RX1__ESAI_TX4_RX1 0x15c 0x5a0 0x000 0x0 0x0 +#define MX35_PAD_TX4_RX1__AUDMUX_AUD4_RXFS 0x15c 0x5a0 0x000 0x1 0x0 +#define MX35_PAD_TX4_RX1__CSPI2_SS3 0x15c 0x5a0 0x7fc 0x2 0x0 +#define MX35_PAD_TX4_RX1__CAN2_RXCAN 0x15c 0x5a0 0x7cc 0x3 0x0 +#define MX35_PAD_TX4_RX1__UART2_DSR 0x15c 0x5a0 0x000 0x4 0x0 +#define MX35_PAD_TX4_RX1__GPIO1_11 0x15c 0x5a0 0x834 0x5 0x0 +#define MX35_PAD_TX4_RX1__IPU_CSI_D_3 0x15c 0x5a0 0x93c 0x6 0x0 +#define MX35_PAD_TX4_RX1__KPP_ROW_0 0x15c 0x5a0 0x970 0x7 0x1 +#define MX35_PAD_TX3_RX2__ESAI_TX3_RX2 0x160 0x5a4 0x000 0x0 0x0 +#define MX35_PAD_TX3_RX2__I2C3_SCL 0x160 0x5a4 0x91c 0x1 0x0 +#define MX35_PAD_TX3_RX2__EMI_NANDF_CE1 0x160 0x5a4 0x000 0x3 0x0 +#define MX35_PAD_TX3_RX2__GPIO1_12 0x160 0x5a4 0x000 0x5 0x0 +#define MX35_PAD_TX3_RX2__IPU_CSI_D_4 0x160 0x5a4 0x940 0x6 0x0 +#define MX35_PAD_TX3_RX2__KPP_ROW_1 0x160 0x5a4 0x974 0x7 0x1 +#define MX35_PAD_TX2_RX3__ESAI_TX2_RX3 0x164 0x5a8 0x000 0x0 0x0 +#define MX35_PAD_TX2_RX3__I2C3_SDA 0x164 0x5a8 0x920 0x1 0x0 +#define MX35_PAD_TX2_RX3__EMI_NANDF_CE2 0x164 0x5a8 0x000 0x3 0x0 +#define MX35_PAD_TX2_RX3__GPIO1_13 0x164 0x5a8 0x000 0x5 0x0 +#define MX35_PAD_TX2_RX3__IPU_CSI_D_5 0x164 0x5a8 0x944 0x6 0x0 +#define MX35_PAD_TX2_RX3__KPP_COL_0 0x164 0x5a8 0x950 0x7 0x1 +#define MX35_PAD_TX1__ESAI_TX1 0x168 0x5ac 0x000 0x0 0x0 +#define MX35_PAD_TX1__CCM_PMIC_RDY 0x168 0x5ac 0x7d4 0x1 0x1 +#define MX35_PAD_TX1__CSPI1_SS2 0x168 0x5ac 0x7d8 0x2 0x2 +#define MX35_PAD_TX1__EMI_NANDF_CE3 0x168 0x5ac 0x000 0x3 0x0 +#define MX35_PAD_TX1__UART2_RI 0x168 0x5ac 0x000 0x4 0x0 +#define MX35_PAD_TX1__GPIO1_14 0x168 0x5ac 0x000 0x5 0x0 +#define MX35_PAD_TX1__IPU_CSI_D_6 0x168 0x5ac 0x948 0x6 0x0 +#define MX35_PAD_TX1__KPP_COL_1 0x168 0x5ac 0x954 0x7 0x1 +#define MX35_PAD_TX0__ESAI_TX0 0x16c 0x5b0 0x000 0x0 0x0 +#define MX35_PAD_TX0__SPDIF_SPDIF_EXTCLK 0x16c 0x5b0 0x994 0x1 0x1 +#define MX35_PAD_TX0__CSPI1_SS3 0x16c 0x5b0 0x7dc 0x2 0x0 +#define MX35_PAD_TX0__EMI_DTACK_B 0x16c 0x5b0 0x800 0x3 0x1 +#define MX35_PAD_TX0__UART2_DCD 0x16c 0x5b0 0x000 0x4 0x0 +#define MX35_PAD_TX0__GPIO1_15 0x16c 0x5b0 0x000 0x5 0x0 +#define MX35_PAD_TX0__IPU_CSI_D_7 0x16c 0x5b0 0x94c 0x6 0x0 +#define MX35_PAD_TX0__KPP_COL_2 0x16c 0x5b0 0x958 0x7 0x1 +#define MX35_PAD_CSPI1_MOSI__CSPI1_MOSI 0x170 0x5b4 0x000 0x0 0x0 +#define MX35_PAD_CSPI1_MOSI__GPIO1_16 0x170 0x5b4 0x000 0x5 0x0 +#define MX35_PAD_CSPI1_MOSI__ECT_CTI_TRIG_OUT1_2 0x170 0x5b4 0x000 0x7 0x0 +#define MX35_PAD_CSPI1_MISO__CSPI1_MISO 0x174 0x5b8 0x000 0x0 0x0 +#define MX35_PAD_CSPI1_MISO__GPIO1_17 0x174 0x5b8 0x000 0x5 0x0 +#define MX35_PAD_CSPI1_MISO__ECT_CTI_TRIG_OUT1_3 0x174 0x5b8 0x000 0x7 0x0 +#define MX35_PAD_CSPI1_SS0__CSPI1_SS0 0x178 0x5bc 0x000 0x0 0x0 +#define MX35_PAD_CSPI1_SS0__OWIRE_LINE 0x178 0x5bc 0x990 0x1 0x1 +#define MX35_PAD_CSPI1_SS0__CSPI2_SS3 0x178 0x5bc 0x7fc 0x2 0x1 +#define MX35_PAD_CSPI1_SS0__GPIO1_18 0x178 0x5bc 0x000 0x5 0x0 +#define MX35_PAD_CSPI1_SS0__ECT_CTI_TRIG_OUT1_4 0x178 0x5bc 0x000 0x7 0x0 +#define MX35_PAD_CSPI1_SS1__CSPI1_SS1 0x17c 0x5c0 0x000 0x0 0x0 +#define MX35_PAD_CSPI1_SS1__PWM_PWMO 0x17c 0x5c0 0x000 0x1 0x0 +#define MX35_PAD_CSPI1_SS1__CCM_CLK32K 0x17c 0x5c0 0x7d0 0x2 0x1 +#define MX35_PAD_CSPI1_SS1__GPIO1_19 0x17c 0x5c0 0x000 0x5 0x0 +#define MX35_PAD_CSPI1_SS1__IPU_DIAGB_29 0x17c 0x5c0 0x000 0x6 0x0 +#define MX35_PAD_CSPI1_SS1__ECT_CTI_TRIG_OUT1_5 0x17c 0x5c0 0x000 0x7 0x0 +#define MX35_PAD_CSPI1_SCLK__CSPI1_SCLK 0x180 0x5c4 0x000 0x0 0x0 +#define MX35_PAD_CSPI1_SCLK__GPIO3_4 0x180 0x5c4 0x904 0x5 0x0 +#define MX35_PAD_CSPI1_SCLK__IPU_DIAGB_30 0x180 0x5c4 0x000 0x6 0x0 +#define MX35_PAD_CSPI1_SCLK__EMI_M3IF_CHOSEN_MASTER_1 0x180 0x5c4 0x000 0x7 0x0 +#define MX35_PAD_CSPI1_SPI_RDY__CSPI1_RDY 0x184 0x5c8 0x000 0x0 0x0 +#define MX35_PAD_CSPI1_SPI_RDY__GPIO3_5 0x184 0x5c8 0x908 0x5 0x0 +#define MX35_PAD_CSPI1_SPI_RDY__IPU_DIAGB_31 0x184 0x5c8 0x000 0x6 0x0 +#define MX35_PAD_CSPI1_SPI_RDY__EMI_M3IF_CHOSEN_MASTER_2 0x184 0x5c8 0x000 0x7 0x0 +#define MX35_PAD_RXD1__UART1_RXD_MUX 0x188 0x5cc 0x000 0x0 0x0 +#define MX35_PAD_RXD1__CSPI2_MOSI 0x188 0x5cc 0x7ec 0x1 0x1 +#define MX35_PAD_RXD1__KPP_COL_4 0x188 0x5cc 0x960 0x4 0x0 +#define MX35_PAD_RXD1__GPIO3_6 0x188 0x5cc 0x90c 0x5 0x0 +#define MX35_PAD_RXD1__ARM11P_TOP_EVNTBUS_16 0x188 0x5cc 0x000 0x7 0x0 +#define MX35_PAD_TXD1__UART1_TXD_MUX 0x18c 0x5d0 0x000 0x0 0x0 +#define MX35_PAD_TXD1__CSPI2_MISO 0x18c 0x5d0 0x7e8 0x1 0x1 +#define MX35_PAD_TXD1__KPP_COL_5 0x18c 0x5d0 0x964 0x4 0x0 +#define MX35_PAD_TXD1__GPIO3_7 0x18c 0x5d0 0x910 0x5 0x0 +#define MX35_PAD_TXD1__ARM11P_TOP_EVNTBUS_17 0x18c 0x5d0 0x000 0x7 0x0 +#define MX35_PAD_RTS1__UART1_RTS 0x190 0x5d4 0x000 0x0 0x0 +#define MX35_PAD_RTS1__CSPI2_SCLK 0x190 0x5d4 0x7e0 0x1 0x1 +#define MX35_PAD_RTS1__I2C3_SCL 0x190 0x5d4 0x91c 0x2 0x1 +#define MX35_PAD_RTS1__IPU_CSI_D_0 0x190 0x5d4 0x930 0x3 0x1 +#define MX35_PAD_RTS1__KPP_COL_6 0x190 0x5d4 0x968 0x4 0x0 +#define MX35_PAD_RTS1__GPIO3_8 0x190 0x5d4 0x914 0x5 0x0 +#define MX35_PAD_RTS1__EMI_NANDF_CE1 0x190 0x5d4 0x000 0x6 0x0 +#define MX35_PAD_RTS1__ARM11P_TOP_EVNTBUS_18 0x190 0x5d4 0x000 0x7 0x0 +#define MX35_PAD_CTS1__UART1_CTS 0x194 0x5d8 0x000 0x0 0x0 +#define MX35_PAD_CTS1__CSPI2_RDY 0x194 0x5d8 0x7e4 0x1 0x1 +#define MX35_PAD_CTS1__I2C3_SDA 0x194 0x5d8 0x920 0x2 0x1 +#define MX35_PAD_CTS1__IPU_CSI_D_1 0x194 0x5d8 0x934 0x3 0x1 +#define MX35_PAD_CTS1__KPP_COL_7 0x194 0x5d8 0x96c 0x4 0x0 +#define MX35_PAD_CTS1__GPIO3_9 0x194 0x5d8 0x918 0x5 0x0 +#define MX35_PAD_CTS1__EMI_NANDF_CE2 0x194 0x5d8 0x000 0x6 0x0 +#define MX35_PAD_CTS1__ARM11P_TOP_EVNTBUS_19 0x194 0x5d8 0x000 0x7 0x0 +#define MX35_PAD_RXD2__UART2_RXD_MUX 0x198 0x5dc 0x000 0x0 0x0 +#define MX35_PAD_RXD2__KPP_ROW_4 0x198 0x5dc 0x980 0x4 0x0 +#define MX35_PAD_RXD2__GPIO3_10 0x198 0x5dc 0x8ec 0x5 0x0 +#define MX35_PAD_TXD2__UART2_TXD_MUX 0x19c 0x5e0 0x000 0x0 0x0 +#define MX35_PAD_TXD2__SPDIF_SPDIF_EXTCLK 0x19c 0x5e0 0x994 0x1 0x2 +#define MX35_PAD_TXD2__KPP_ROW_5 0x19c 0x5e0 0x984 0x4 0x0 +#define MX35_PAD_TXD2__GPIO3_11 0x19c 0x5e0 0x8f0 0x5 0x0 +#define MX35_PAD_RTS2__UART2_RTS 0x1a0 0x5e4 0x000 0x0 0x0 +#define MX35_PAD_RTS2__SPDIF_SPDIF_IN1 0x1a0 0x5e4 0x998 0x1 0x1 +#define MX35_PAD_RTS2__CAN2_RXCAN 0x1a0 0x5e4 0x7cc 0x2 0x1 +#define MX35_PAD_RTS2__IPU_CSI_D_2 0x1a0 0x5e4 0x938 0x3 0x1 +#define MX35_PAD_RTS2__KPP_ROW_6 0x1a0 0x5e4 0x988 0x4 0x0 +#define MX35_PAD_RTS2__GPIO3_12 0x1a0 0x5e4 0x8f4 0x5 0x0 +#define MX35_PAD_RTS2__AUDMUX_AUD5_RXC 0x1a0 0x5e4 0x000 0x6 0x0 +#define MX35_PAD_RTS2__UART3_RXD_MUX 0x1a0 0x5e4 0x9a0 0x7 0x0 +#define MX35_PAD_CTS2__UART2_CTS 0x1a4 0x5e8 0x000 0x0 0x0 +#define MX35_PAD_CTS2__SPDIF_SPDIF_OUT1 0x1a4 0x5e8 0x000 0x1 0x0 +#define MX35_PAD_CTS2__CAN2_TXCAN 0x1a4 0x5e8 0x000 0x2 0x0 +#define MX35_PAD_CTS2__IPU_CSI_D_3 0x1a4 0x5e8 0x93c 0x3 0x1 +#define MX35_PAD_CTS2__KPP_ROW_7 0x1a4 0x5e8 0x98c 0x4 0x0 +#define MX35_PAD_CTS2__GPIO3_13 0x1a4 0x5e8 0x8f8 0x5 0x0 +#define MX35_PAD_CTS2__AUDMUX_AUD5_RXFS 0x1a4 0x5e8 0x000 0x6 0x0 +#define MX35_PAD_CTS2__UART3_TXD_MUX 0x1a4 0x5e8 0x000 0x7 0x0 +#define MX35_PAD_RTCK__ARM11P_TOP_RTCK 0x000 0x5ec 0x000 0x0 0x0 +#define MX35_PAD_TCK__SJC_TCK 0x000 0x5f0 0x000 0x0 0x0 +#define MX35_PAD_TMS__SJC_TMS 0x000 0x5f4 0x000 0x0 0x0 +#define MX35_PAD_TDI__SJC_TDI 0x000 0x5f8 0x000 0x0 0x0 +#define MX35_PAD_TDO__SJC_TDO 0x000 0x5fc 0x000 0x0 0x0 +#define MX35_PAD_TRSTB__SJC_TRSTB 0x000 0x600 0x000 0x0 0x0 +#define MX35_PAD_DE_B__SJC_DE_B 0x000 0x604 0x000 0x0 0x0 +#define MX35_PAD_SJC_MOD__SJC_MOD 0x000 0x608 0x000 0x0 0x0 +#define MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR 0x1a8 0x60c 0x000 0x0 0x0 +#define MX35_PAD_USBOTG_PWR__USB_TOP_USBH2_PWR 0x1a8 0x60c 0x000 0x1 0x0 +#define MX35_PAD_USBOTG_PWR__GPIO3_14 0x1a8 0x60c 0x8fc 0x5 0x0 +#define MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC 0x1ac 0x610 0x000 0x0 0x0 +#define MX35_PAD_USBOTG_OC__USB_TOP_USBH2_OC 0x1ac 0x610 0x9f4 0x1 0x1 +#define MX35_PAD_USBOTG_OC__GPIO3_15 0x1ac 0x610 0x900 0x5 0x0 +#define MX35_PAD_LD0__IPU_DISPB_DAT_0 0x1b0 0x614 0x000 0x0 0x0 +#define MX35_PAD_LD0__GPIO2_0 0x1b0 0x614 0x868 0x5 0x1 +#define MX35_PAD_LD0__SDMA_SDMA_DEBUG_PC_0 0x1b0 0x614 0x000 0x6 0x0 +#define MX35_PAD_LD1__IPU_DISPB_DAT_1 0x1b4 0x618 0x000 0x0 0x0 +#define MX35_PAD_LD1__GPIO2_1 0x1b4 0x618 0x894 0x5 0x0 +#define MX35_PAD_LD1__SDMA_SDMA_DEBUG_PC_1 0x1b4 0x618 0x000 0x6 0x0 +#define MX35_PAD_LD2__IPU_DISPB_DAT_2 0x1b8 0x61c 0x000 0x0 0x0 +#define MX35_PAD_LD2__GPIO2_2 0x1b8 0x61c 0x8c0 0x5 0x0 +#define MX35_PAD_LD2__SDMA_SDMA_DEBUG_PC_2 0x1b8 0x61c 0x000 0x6 0x0 +#define MX35_PAD_LD3__IPU_DISPB_DAT_3 0x1bc 0x620 0x000 0x0 0x0 +#define MX35_PAD_LD3__GPIO2_3 0x1bc 0x620 0x8cc 0x5 0x0 +#define MX35_PAD_LD3__SDMA_SDMA_DEBUG_PC_3 0x1bc 0x620 0x000 0x6 0x0 +#define MX35_PAD_LD4__IPU_DISPB_DAT_4 0x1c0 0x624 0x000 0x0 0x0 +#define MX35_PAD_LD4__GPIO2_4 0x1c0 0x624 0x8d0 0x5 0x0 +#define MX35_PAD_LD4__SDMA_SDMA_DEBUG_PC_4 0x1c0 0x624 0x000 0x6 0x0 +#define MX35_PAD_LD5__IPU_DISPB_DAT_5 0x1c4 0x628 0x000 0x0 0x0 +#define MX35_PAD_LD5__GPIO2_5 0x1c4 0x628 0x8d4 0x5 0x0 +#define MX35_PAD_LD5__SDMA_SDMA_DEBUG_PC_5 0x1c4 0x628 0x000 0x6 0x0 +#define MX35_PAD_LD6__IPU_DISPB_DAT_6 0x1c8 0x62c 0x000 0x0 0x0 +#define MX35_PAD_LD6__GPIO2_6 0x1c8 0x62c 0x8d8 0x5 0x0 +#define MX35_PAD_LD6__SDMA_SDMA_DEBUG_PC_6 0x1c8 0x62c 0x000 0x6 0x0 +#define MX35_PAD_LD7__IPU_DISPB_DAT_7 0x1cc 0x630 0x000 0x0 0x0 +#define MX35_PAD_LD7__GPIO2_7 0x1cc 0x630 0x8dc 0x5 0x0 +#define MX35_PAD_LD7__SDMA_SDMA_DEBUG_PC_7 0x1cc 0x630 0x000 0x6 0x0 +#define MX35_PAD_LD8__IPU_DISPB_DAT_8 0x1d0 0x634 0x000 0x0 0x0 +#define MX35_PAD_LD8__GPIO2_8 0x1d0 0x634 0x8e0 0x5 0x0 +#define MX35_PAD_LD8__SDMA_SDMA_DEBUG_PC_8 0x1d0 0x634 0x000 0x6 0x0 +#define MX35_PAD_LD9__IPU_DISPB_DAT_9 0x1d4 0x638 0x000 0x0 0x0 +#define MX35_PAD_LD9__GPIO2_9 0x1d4 0x638 0x8e4 0x5 0x0 +#define MX35_PAD_LD9__SDMA_SDMA_DEBUG_PC_9 0x1d4 0x638 0x000 0x6 0x0 +#define MX35_PAD_LD10__IPU_DISPB_DAT_10 0x1d8 0x63c 0x000 0x0 0x0 +#define MX35_PAD_LD10__GPIO2_10 0x1d8 0x63c 0x86c 0x5 0x0 +#define MX35_PAD_LD10__SDMA_SDMA_DEBUG_PC_10 0x1d8 0x63c 0x000 0x6 0x0 +#define MX35_PAD_LD11__IPU_DISPB_DAT_11 0x1dc 0x640 0x000 0x0 0x0 +#define MX35_PAD_LD11__GPIO2_11 0x1dc 0x640 0x870 0x5 0x0 +#define MX35_PAD_LD11__SDMA_SDMA_DEBUG_PC_11 0x1dc 0x640 0x000 0x6 0x0 +#define MX35_PAD_LD11__ARM11P_TOP_TRACE_4 0x1dc 0x640 0x000 0x7 0x0 +#define MX35_PAD_LD12__IPU_DISPB_DAT_12 0x1e0 0x644 0x000 0x0 0x0 +#define MX35_PAD_LD12__GPIO2_12 0x1e0 0x644 0x874 0x5 0x0 +#define MX35_PAD_LD12__SDMA_SDMA_DEBUG_PC_12 0x1e0 0x644 0x000 0x6 0x0 +#define MX35_PAD_LD12__ARM11P_TOP_TRACE_5 0x1e0 0x644 0x000 0x7 0x0 +#define MX35_PAD_LD13__IPU_DISPB_DAT_13 0x1e4 0x648 0x000 0x0 0x0 +#define MX35_PAD_LD13__GPIO2_13 0x1e4 0x648 0x878 0x5 0x0 +#define MX35_PAD_LD13__SDMA_SDMA_DEBUG_PC_13 0x1e4 0x648 0x000 0x6 0x0 +#define MX35_PAD_LD13__ARM11P_TOP_TRACE_6 0x1e4 0x648 0x000 0x7 0x0 +#define MX35_PAD_LD14__IPU_DISPB_DAT_14 0x1e8 0x64c 0x000 0x0 0x0 +#define MX35_PAD_LD14__GPIO2_14 0x1e8 0x64c 0x87c 0x5 0x0 +#define MX35_PAD_LD14__SDMA_SDMA_DEBUG_EVENT_CHANNEL_0 0x1e8 0x64c 0x000 0x6 0x0 +#define MX35_PAD_LD14__ARM11P_TOP_TRACE_7 0x1e8 0x64c 0x000 0x7 0x0 +#define MX35_PAD_LD15__IPU_DISPB_DAT_15 0x1ec 0x650 0x000 0x0 0x0 +#define MX35_PAD_LD15__GPIO2_15 0x1ec 0x650 0x880 0x5 0x0 +#define MX35_PAD_LD15__SDMA_SDMA_DEBUG_EVENT_CHANNEL_1 0x1ec 0x650 0x000 0x6 0x0 +#define MX35_PAD_LD15__ARM11P_TOP_TRACE_8 0x1ec 0x650 0x000 0x7 0x0 +#define MX35_PAD_LD16__IPU_DISPB_DAT_16 0x1f0 0x654 0x000 0x0 0x0 +#define MX35_PAD_LD16__IPU_DISPB_D12_VSYNC 0x1f0 0x654 0x928 0x2 0x0 +#define MX35_PAD_LD16__GPIO2_16 0x1f0 0x654 0x884 0x5 0x0 +#define MX35_PAD_LD16__SDMA_SDMA_DEBUG_EVENT_CHANNEL_2 0x1f0 0x654 0x000 0x6 0x0 +#define MX35_PAD_LD16__ARM11P_TOP_TRACE_9 0x1f0 0x654 0x000 0x7 0x0 +#define MX35_PAD_LD17__IPU_DISPB_DAT_17 0x1f4 0x658 0x000 0x0 0x0 +#define MX35_PAD_LD17__IPU_DISPB_CS2 0x1f4 0x658 0x000 0x2 0x0 +#define MX35_PAD_LD17__GPIO2_17 0x1f4 0x658 0x888 0x5 0x0 +#define MX35_PAD_LD17__SDMA_SDMA_DEBUG_EVENT_CHANNEL_3 0x1f4 0x658 0x000 0x6 0x0 +#define MX35_PAD_LD17__ARM11P_TOP_TRACE_10 0x1f4 0x658 0x000 0x7 0x0 +#define MX35_PAD_LD18__IPU_DISPB_DAT_18 0x1f8 0x65c 0x000 0x0 0x0 +#define MX35_PAD_LD18__IPU_DISPB_D0_VSYNC 0x1f8 0x65c 0x924 0x1 0x1 +#define MX35_PAD_LD18__IPU_DISPB_D12_VSYNC 0x1f8 0x65c 0x928 0x2 0x1 +#define MX35_PAD_LD18__ESDHC3_CMD 0x1f8 0x65c 0x818 0x3 0x0 +#define MX35_PAD_LD18__USB_TOP_USBOTG_DATA_3 0x1f8 0x65c 0x9b0 0x4 0x0 +#define MX35_PAD_LD18__GPIO3_24 0x1f8 0x65c 0x000 0x5 0x0 +#define MX35_PAD_LD18__SDMA_SDMA_DEBUG_EVENT_CHANNEL_4 0x1f8 0x65c 0x000 0x6 0x0 +#define MX35_PAD_LD18__ARM11P_TOP_TRACE_11 0x1f8 0x65c 0x000 0x7 0x0 +#define MX35_PAD_LD19__IPU_DISPB_DAT_19 0x1fc 0x660 0x000 0x0 0x0 +#define MX35_PAD_LD19__IPU_DISPB_BCLK 0x1fc 0x660 0x000 0x1 0x0 +#define MX35_PAD_LD19__IPU_DISPB_CS1 0x1fc 0x660 0x000 0x2 0x0 +#define MX35_PAD_LD19__ESDHC3_CLK 0x1fc 0x660 0x814 0x3 0x0 +#define MX35_PAD_LD19__USB_TOP_USBOTG_DIR 0x1fc 0x660 0x9c4 0x4 0x0 +#define MX35_PAD_LD19__GPIO3_25 0x1fc 0x660 0x000 0x5 0x0 +#define MX35_PAD_LD19__SDMA_SDMA_DEBUG_EVENT_CHANNEL_5 0x1fc 0x660 0x000 0x6 0x0 +#define MX35_PAD_LD19__ARM11P_TOP_TRACE_12 0x1fc 0x660 0x000 0x7 0x0 +#define MX35_PAD_LD20__IPU_DISPB_DAT_20 0x200 0x664 0x000 0x0 0x0 +#define MX35_PAD_LD20__IPU_DISPB_CS0 0x200 0x664 0x000 0x1 0x0 +#define MX35_PAD_LD20__IPU_DISPB_SD_CLK 0x200 0x664 0x000 0x2 0x0 +#define MX35_PAD_LD20__ESDHC3_DAT0 0x200 0x664 0x81c 0x3 0x0 +#define MX35_PAD_LD20__GPIO3_26 0x200 0x664 0x000 0x5 0x0 +#define MX35_PAD_LD20__SDMA_SDMA_DEBUG_CORE_STATUS_3 0x200 0x664 0x000 0x6 0x0 +#define MX35_PAD_LD20__ARM11P_TOP_TRACE_13 0x200 0x664 0x000 0x7 0x0 +#define MX35_PAD_LD21__IPU_DISPB_DAT_21 0x204 0x668 0x000 0x0 0x0 +#define MX35_PAD_LD21__IPU_DISPB_PAR_RS 0x204 0x668 0x000 0x1 0x0 +#define MX35_PAD_LD21__IPU_DISPB_SER_RS 0x204 0x668 0x000 0x2 0x0 +#define MX35_PAD_LD21__ESDHC3_DAT1 0x204 0x668 0x820 0x3 0x0 +#define MX35_PAD_LD21__USB_TOP_USBOTG_STP 0x204 0x668 0x000 0x4 0x0 +#define MX35_PAD_LD21__GPIO3_27 0x204 0x668 0x000 0x5 0x0 +#define MX35_PAD_LD21__SDMA_DEBUG_EVENT_CHANNEL_SEL 0x204 0x668 0x000 0x6 0x0 +#define MX35_PAD_LD21__ARM11P_TOP_TRACE_14 0x204 0x668 0x000 0x7 0x0 +#define MX35_PAD_LD22__IPU_DISPB_DAT_22 0x208 0x66c 0x000 0x0 0x0 +#define MX35_PAD_LD22__IPU_DISPB_WR 0x208 0x66c 0x000 0x1 0x0 +#define MX35_PAD_LD22__IPU_DISPB_SD_D_I 0x208 0x66c 0x92c 0x2 0x0 +#define MX35_PAD_LD22__ESDHC3_DAT2 0x208 0x66c 0x824 0x3 0x0 +#define MX35_PAD_LD22__USB_TOP_USBOTG_NXT 0x208 0x66c 0x9c8 0x4 0x0 +#define MX35_PAD_LD22__GPIO3_28 0x208 0x66c 0x000 0x5 0x0 +#define MX35_PAD_LD22__SDMA_DEBUG_BUS_ERROR 0x208 0x66c 0x000 0x6 0x0 +#define MX35_PAD_LD22__ARM11P_TOP_TRCTL 0x208 0x66c 0x000 0x7 0x0 +#define MX35_PAD_LD23__IPU_DISPB_DAT_23 0x20c 0x670 0x000 0x0 0x0 +#define MX35_PAD_LD23__IPU_DISPB_RD 0x20c 0x670 0x000 0x1 0x0 +#define MX35_PAD_LD23__IPU_DISPB_SD_D_IO 0x20c 0x670 0x92c 0x2 0x1 +#define MX35_PAD_LD23__ESDHC3_DAT3 0x20c 0x670 0x828 0x3 0x0 +#define MX35_PAD_LD23__USB_TOP_USBOTG_DATA_7 0x20c 0x670 0x9c0 0x4 0x0 +#define MX35_PAD_LD23__GPIO3_29 0x20c 0x670 0x000 0x5 0x0 +#define MX35_PAD_LD23__SDMA_DEBUG_MATCHED_DMBUS 0x20c 0x670 0x000 0x6 0x0 +#define MX35_PAD_LD23__ARM11P_TOP_TRCLK 0x20c 0x670 0x000 0x7 0x0 +#define MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC 0x210 0x674 0x000 0x0 0x0 +#define MX35_PAD_D3_HSYNC__IPU_DISPB_SD_D_IO 0x210 0x674 0x92c 0x2 0x2 +#define MX35_PAD_D3_HSYNC__GPIO3_30 0x210 0x674 0x000 0x5 0x0 +#define MX35_PAD_D3_HSYNC__SDMA_DEBUG_RTBUFFER_WRITE 0x210 0x674 0x000 0x6 0x0 +#define MX35_PAD_D3_HSYNC__ARM11P_TOP_TRACE_15 0x210 0x674 0x000 0x7 0x0 +#define MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK 0x214 0x678 0x000 0x0 0x0 +#define MX35_PAD_D3_FPSHIFT__IPU_DISPB_SD_CLK 0x214 0x678 0x000 0x2 0x0 +#define MX35_PAD_D3_FPSHIFT__GPIO3_31 0x214 0x678 0x000 0x5 0x0 +#define MX35_PAD_D3_FPSHIFT__SDMA_SDMA_DEBUG_CORE_STATUS_0 0x214 0x678 0x000 0x6 0x0 +#define MX35_PAD_D3_FPSHIFT__ARM11P_TOP_TRACE_16 0x214 0x678 0x000 0x7 0x0 +#define MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY 0x218 0x67c 0x000 0x0 0x0 +#define MX35_PAD_D3_DRDY__IPU_DISPB_SD_D_O 0x218 0x67c 0x000 0x2 0x0 +#define MX35_PAD_D3_DRDY__GPIO1_0 0x218 0x67c 0x82c 0x5 0x2 +#define MX35_PAD_D3_DRDY__SDMA_SDMA_DEBUG_CORE_STATUS_1 0x218 0x67c 0x000 0x6 0x0 +#define MX35_PAD_D3_DRDY__ARM11P_TOP_TRACE_17 0x218 0x67c 0x000 0x7 0x0 +#define MX35_PAD_CONTRAST__IPU_DISPB_CONTR 0x21c 0x680 0x000 0x0 0x0 +#define MX35_PAD_CONTRAST__GPIO1_1 0x21c 0x680 0x838 0x5 0x2 +#define MX35_PAD_CONTRAST__SDMA_SDMA_DEBUG_CORE_STATUS_2 0x21c 0x680 0x000 0x6 0x0 +#define MX35_PAD_CONTRAST__ARM11P_TOP_TRACE_18 0x21c 0x680 0x000 0x7 0x0 +#define MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC 0x220 0x684 0x000 0x0 0x0 +#define MX35_PAD_D3_VSYNC__IPU_DISPB_CS1 0x220 0x684 0x000 0x2 0x0 +#define MX35_PAD_D3_VSYNC__GPIO1_2 0x220 0x684 0x848 0x5 0x1 +#define MX35_PAD_D3_VSYNC__SDMA_DEBUG_YIELD 0x220 0x684 0x000 0x6 0x0 +#define MX35_PAD_D3_VSYNC__ARM11P_TOP_TRACE_19 0x220 0x684 0x000 0x7 0x0 +#define MX35_PAD_D3_REV__IPU_DISPB_D3_REV 0x224 0x688 0x000 0x0 0x0 +#define MX35_PAD_D3_REV__IPU_DISPB_SER_RS 0x224 0x688 0x000 0x2 0x0 +#define MX35_PAD_D3_REV__GPIO1_3 0x224 0x688 0x84c 0x5 0x1 +#define MX35_PAD_D3_REV__SDMA_DEBUG_BUS_RWB 0x224 0x688 0x000 0x6 0x0 +#define MX35_PAD_D3_REV__ARM11P_TOP_TRACE_20 0x224 0x688 0x000 0x7 0x0 +#define MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS 0x228 0x68c 0x000 0x0 0x0 +#define MX35_PAD_D3_CLS__IPU_DISPB_CS2 0x228 0x68c 0x000 0x2 0x0 +#define MX35_PAD_D3_CLS__GPIO1_4 0x228 0x68c 0x850 0x5 0x2 +#define MX35_PAD_D3_CLS__SDMA_DEBUG_BUS_DEVICE_0 0x228 0x68c 0x000 0x6 0x0 +#define MX35_PAD_D3_CLS__ARM11P_TOP_TRACE_21 0x228 0x68c 0x000 0x7 0x0 +#define MX35_PAD_D3_SPL__IPU_DISPB_D3_SPL 0x22c 0x690 0x000 0x0 0x0 +#define MX35_PAD_D3_SPL__IPU_DISPB_D12_VSYNC 0x22c 0x690 0x928 0x2 0x2 +#define MX35_PAD_D3_SPL__GPIO1_5 0x22c 0x690 0x854 0x5 0x2 +#define MX35_PAD_D3_SPL__SDMA_DEBUG_BUS_DEVICE_1 0x22c 0x690 0x000 0x6 0x0 +#define MX35_PAD_D3_SPL__ARM11P_TOP_TRACE_22 0x22c 0x690 0x000 0x7 0x0 +#define MX35_PAD_SD1_CMD__ESDHC1_CMD 0x230 0x694 0x000 0x0 0x0 +#define MX35_PAD_SD1_CMD__MSHC_SCLK 0x230 0x694 0x000 0x1 0x0 +#define MX35_PAD_SD1_CMD__IPU_DISPB_D0_VSYNC 0x230 0x694 0x924 0x3 0x2 +#define MX35_PAD_SD1_CMD__USB_TOP_USBOTG_DATA_4 0x230 0x694 0x9b4 0x4 0x0 +#define MX35_PAD_SD1_CMD__GPIO1_6 0x230 0x694 0x858 0x5 0x2 +#define MX35_PAD_SD1_CMD__ARM11P_TOP_TRCTL 0x230 0x694 0x000 0x7 0x0 +#define MX35_PAD_SD1_CLK__ESDHC1_CLK 0x234 0x698 0x000 0x0 0x0 +#define MX35_PAD_SD1_CLK__MSHC_BS 0x234 0x698 0x000 0x1 0x0 +#define MX35_PAD_SD1_CLK__IPU_DISPB_BCLK 0x234 0x698 0x000 0x3 0x0 +#define MX35_PAD_SD1_CLK__USB_TOP_USBOTG_DATA_5 0x234 0x698 0x9b8 0x4 0x0 +#define MX35_PAD_SD1_CLK__GPIO1_7 0x234 0x698 0x85c 0x5 0x2 +#define MX35_PAD_SD1_CLK__ARM11P_TOP_TRCLK 0x234 0x698 0x000 0x7 0x0 +#define MX35_PAD_SD1_DATA0__ESDHC1_DAT0 0x238 0x69c 0x000 0x0 0x0 +#define MX35_PAD_SD1_DATA0__MSHC_DATA_0 0x238 0x69c 0x000 0x1 0x0 +#define MX35_PAD_SD1_DATA0__IPU_DISPB_CS0 0x238 0x69c 0x000 0x3 0x0 +#define MX35_PAD_SD1_DATA0__USB_TOP_USBOTG_DATA_6 0x238 0x69c 0x9bc 0x4 0x0 +#define MX35_PAD_SD1_DATA0__GPIO1_8 0x238 0x69c 0x860 0x5 0x2 +#define MX35_PAD_SD1_DATA0__ARM11P_TOP_TRACE_23 0x238 0x69c 0x000 0x7 0x0 +#define MX35_PAD_SD1_DATA1__ESDHC1_DAT1 0x23c 0x6a0 0x000 0x0 0x0 +#define MX35_PAD_SD1_DATA1__MSHC_DATA_1 0x23c 0x6a0 0x000 0x1 0x0 +#define MX35_PAD_SD1_DATA1__IPU_DISPB_PAR_RS 0x23c 0x6a0 0x000 0x3 0x0 +#define MX35_PAD_SD1_DATA1__USB_TOP_USBOTG_DATA_0 0x23c 0x6a0 0x9a4 0x4 0x0 +#define MX35_PAD_SD1_DATA1__GPIO1_9 0x23c 0x6a0 0x864 0x5 0x1 +#define MX35_PAD_SD1_DATA1__ARM11P_TOP_TRACE_24 0x23c 0x6a0 0x000 0x7 0x0 +#define MX35_PAD_SD1_DATA2__ESDHC1_DAT2 0x240 0x6a4 0x000 0x0 0x0 +#define MX35_PAD_SD1_DATA2__MSHC_DATA_2 0x240 0x6a4 0x000 0x1 0x0 +#define MX35_PAD_SD1_DATA2__IPU_DISPB_WR 0x240 0x6a4 0x000 0x3 0x0 +#define MX35_PAD_SD1_DATA2__USB_TOP_USBOTG_DATA_1 0x240 0x6a4 0x9a8 0x4 0x0 +#define MX35_PAD_SD1_DATA2__GPIO1_10 0x240 0x6a4 0x830 0x5 0x1 +#define MX35_PAD_SD1_DATA2__ARM11P_TOP_TRACE_25 0x240 0x6a4 0x000 0x7 0x0 +#define MX35_PAD_SD1_DATA3__ESDHC1_DAT3 0x244 0x6a8 0x000 0x0 0x0 +#define MX35_PAD_SD1_DATA3__MSHC_DATA_3 0x244 0x6a8 0x000 0x1 0x0 +#define MX35_PAD_SD1_DATA3__IPU_DISPB_RD 0x244 0x6a8 0x000 0x3 0x0 +#define MX35_PAD_SD1_DATA3__USB_TOP_USBOTG_DATA_2 0x244 0x6a8 0x9ac 0x4 0x0 +#define MX35_PAD_SD1_DATA3__GPIO1_11 0x244 0x6a8 0x834 0x5 0x1 +#define MX35_PAD_SD1_DATA3__ARM11P_TOP_TRACE_26 0x244 0x6a8 0x000 0x7 0x0 +#define MX35_PAD_SD2_CMD__ESDHC2_CMD 0x248 0x6ac 0x000 0x0 0x0 +#define MX35_PAD_SD2_CMD__I2C3_SCL 0x248 0x6ac 0x91c 0x1 0x2 +#define MX35_PAD_SD2_CMD__ESDHC1_DAT4 0x248 0x6ac 0x804 0x2 0x0 +#define MX35_PAD_SD2_CMD__IPU_CSI_D_2 0x248 0x6ac 0x938 0x3 0x2 +#define MX35_PAD_SD2_CMD__USB_TOP_USBH2_DATA_4 0x248 0x6ac 0x9dc 0x4 0x0 +#define MX35_PAD_SD2_CMD__GPIO2_0 0x248 0x6ac 0x868 0x5 0x2 +#define MX35_PAD_SD2_CMD__SPDIF_SPDIF_OUT1 0x248 0x6ac 0x000 0x6 0x0 +#define MX35_PAD_SD2_CMD__IPU_DISPB_D12_VSYNC 0x248 0x6ac 0x928 0x7 0x3 +#define MX35_PAD_SD2_CLK__ESDHC2_CLK 0x24c 0x6b0 0x000 0x0 0x0 +#define MX35_PAD_SD2_CLK__I2C3_SDA 0x24c 0x6b0 0x920 0x1 0x2 +#define MX35_PAD_SD2_CLK__ESDHC1_DAT5 0x24c 0x6b0 0x808 0x2 0x0 +#define MX35_PAD_SD2_CLK__IPU_CSI_D_3 0x24c 0x6b0 0x93c 0x3 0x2 +#define MX35_PAD_SD2_CLK__USB_TOP_USBH2_DATA_5 0x24c 0x6b0 0x9e0 0x4 0x0 +#define MX35_PAD_SD2_CLK__GPIO2_1 0x24c 0x6b0 0x894 0x5 0x1 +#define MX35_PAD_SD2_CLK__SPDIF_SPDIF_IN1 0x24c 0x6b0 0x998 0x6 0x2 +#define MX35_PAD_SD2_CLK__IPU_DISPB_CS2 0x24c 0x6b0 0x000 0x7 0x0 +#define MX35_PAD_SD2_DATA0__ESDHC2_DAT0 0x250 0x6b4 0x000 0x0 0x0 +#define MX35_PAD_SD2_DATA0__UART3_RXD_MUX 0x250 0x6b4 0x9a0 0x1 0x1 +#define MX35_PAD_SD2_DATA0__ESDHC1_DAT6 0x250 0x6b4 0x80c 0x2 0x0 +#define MX35_PAD_SD2_DATA0__IPU_CSI_D_4 0x250 0x6b4 0x940 0x3 0x1 +#define MX35_PAD_SD2_DATA0__USB_TOP_USBH2_DATA_6 0x250 0x6b4 0x9e4 0x4 0x0 +#define MX35_PAD_SD2_DATA0__GPIO2_2 0x250 0x6b4 0x8c0 0x5 0x1 +#define MX35_PAD_SD2_DATA0__SPDIF_SPDIF_EXTCLK 0x250 0x6b4 0x994 0x6 0x3 +#define MX35_PAD_SD2_DATA1__ESDHC2_DAT1 0x254 0x6b8 0x000 0x0 0x0 +#define MX35_PAD_SD2_DATA1__UART3_TXD_MUX 0x254 0x6b8 0x000 0x1 0x0 +#define MX35_PAD_SD2_DATA1__ESDHC1_DAT7 0x254 0x6b8 0x810 0x2 0x0 +#define MX35_PAD_SD2_DATA1__IPU_CSI_D_5 0x254 0x6b8 0x944 0x3 0x1 +#define MX35_PAD_SD2_DATA1__USB_TOP_USBH2_DATA_0 0x254 0x6b8 0x9cc 0x4 0x0 +#define MX35_PAD_SD2_DATA1__GPIO2_3 0x254 0x6b8 0x8cc 0x5 0x1 +#define MX35_PAD_SD2_DATA2__ESDHC2_DAT2 0x258 0x6bc 0x000 0x0 0x0 +#define MX35_PAD_SD2_DATA2__UART3_RTS 0x258 0x6bc 0x99c 0x1 0x0 +#define MX35_PAD_SD2_DATA2__CAN1_RXCAN 0x258 0x6bc 0x7c8 0x2 0x1 +#define MX35_PAD_SD2_DATA2__IPU_CSI_D_6 0x258 0x6bc 0x948 0x3 0x1 +#define MX35_PAD_SD2_DATA2__USB_TOP_USBH2_DATA_1 0x258 0x6bc 0x9d0 0x4 0x0 +#define MX35_PAD_SD2_DATA2__GPIO2_4 0x258 0x6bc 0x8d0 0x5 0x1 +#define MX35_PAD_SD2_DATA3__ESDHC2_DAT3 0x25c 0x6c0 0x000 0x0 0x0 +#define MX35_PAD_SD2_DATA3__UART3_CTS 0x25c 0x6c0 0x000 0x1 0x0 +#define MX35_PAD_SD2_DATA3__CAN1_TXCAN 0x25c 0x6c0 0x000 0x2 0x0 +#define MX35_PAD_SD2_DATA3__IPU_CSI_D_7 0x25c 0x6c0 0x94c 0x3 0x1 +#define MX35_PAD_SD2_DATA3__USB_TOP_USBH2_DATA_2 0x25c 0x6c0 0x9d4 0x4 0x0 +#define MX35_PAD_SD2_DATA3__GPIO2_5 0x25c 0x6c0 0x8d4 0x5 0x1 +#define MX35_PAD_ATA_CS0__ATA_CS0 0x260 0x6c4 0x000 0x0 0x0 +#define MX35_PAD_ATA_CS0__CSPI1_SS3 0x260 0x6c4 0x7dc 0x1 0x1 +#define MX35_PAD_ATA_CS0__IPU_DISPB_CS1 0x260 0x6c4 0x000 0x3 0x0 +#define MX35_PAD_ATA_CS0__GPIO2_6 0x260 0x6c4 0x8d8 0x5 0x1 +#define MX35_PAD_ATA_CS0__IPU_DIAGB_0 0x260 0x6c4 0x000 0x6 0x0 +#define MX35_PAD_ATA_CS0__ARM11P_TOP_MAX1_HMASTER_0 0x260 0x6c4 0x000 0x7 0x0 +#define MX35_PAD_ATA_CS1__ATA_CS1 0x264 0x6c8 0x000 0x0 0x0 +#define MX35_PAD_ATA_CS1__IPU_DISPB_CS2 0x264 0x6c8 0x000 0x3 0x0 +#define MX35_PAD_ATA_CS1__CSPI2_SS0 0x264 0x6c8 0x7f0 0x4 0x1 +#define MX35_PAD_ATA_CS1__GPIO2_7 0x264 0x6c8 0x8dc 0x5 0x1 +#define MX35_PAD_ATA_CS1__IPU_DIAGB_1 0x264 0x6c8 0x000 0x6 0x0 +#define MX35_PAD_ATA_CS1__ARM11P_TOP_MAX1_HMASTER_1 0x264 0x6c8 0x000 0x7 0x0 +#define MX35_PAD_ATA_DIOR__ATA_DIOR 0x268 0x6cc 0x000 0x0 0x0 +#define MX35_PAD_ATA_DIOR__ESDHC3_DAT0 0x268 0x6cc 0x81c 0x1 0x1 +#define MX35_PAD_ATA_DIOR__USB_TOP_USBOTG_DIR 0x268 0x6cc 0x9c4 0x2 0x1 +#define MX35_PAD_ATA_DIOR__IPU_DISPB_BE0 0x268 0x6cc 0x000 0x3 0x0 +#define MX35_PAD_ATA_DIOR__CSPI2_SS1 0x268 0x6cc 0x7f4 0x4 0x1 +#define MX35_PAD_ATA_DIOR__GPIO2_8 0x268 0x6cc 0x8e0 0x5 0x1 +#define MX35_PAD_ATA_DIOR__IPU_DIAGB_2 0x268 0x6cc 0x000 0x6 0x0 +#define MX35_PAD_ATA_DIOR__ARM11P_TOP_MAX1_HMASTER_2 0x268 0x6cc 0x000 0x7 0x0 +#define MX35_PAD_ATA_DIOW__ATA_DIOW 0x26c 0x6d0 0x000 0x0 0x0 +#define MX35_PAD_ATA_DIOW__ESDHC3_DAT1 0x26c 0x6d0 0x820 0x1 0x1 +#define MX35_PAD_ATA_DIOW__USB_TOP_USBOTG_STP 0x26c 0x6d0 0x000 0x2 0x0 +#define MX35_PAD_ATA_DIOW__IPU_DISPB_BE1 0x26c 0x6d0 0x000 0x3 0x0 +#define MX35_PAD_ATA_DIOW__CSPI2_MOSI 0x26c 0x6d0 0x7ec 0x4 0x2 +#define MX35_PAD_ATA_DIOW__GPIO2_9 0x26c 0x6d0 0x8e4 0x5 0x1 +#define MX35_PAD_ATA_DIOW__IPU_DIAGB_3 0x26c 0x6d0 0x000 0x6 0x0 +#define MX35_PAD_ATA_DIOW__ARM11P_TOP_MAX1_HMASTER_3 0x26c 0x6d0 0x000 0x7 0x0 +#define MX35_PAD_ATA_DMACK__ATA_DMACK 0x270 0x6d4 0x000 0x0 0x0 +#define MX35_PAD_ATA_DMACK__ESDHC3_DAT2 0x270 0x6d4 0x824 0x1 0x1 +#define MX35_PAD_ATA_DMACK__USB_TOP_USBOTG_NXT 0x270 0x6d4 0x9c8 0x2 0x1 +#define MX35_PAD_ATA_DMACK__CSPI2_MISO 0x270 0x6d4 0x7e8 0x4 0x2 +#define MX35_PAD_ATA_DMACK__GPIO2_10 0x270 0x6d4 0x86c 0x5 0x1 +#define MX35_PAD_ATA_DMACK__IPU_DIAGB_4 0x270 0x6d4 0x000 0x6 0x0 +#define MX35_PAD_ATA_DMACK__ARM11P_TOP_MAX0_HMASTER_0 0x270 0x6d4 0x000 0x7 0x0 +#define MX35_PAD_ATA_RESET_B__ATA_RESET_B 0x274 0x6d8 0x000 0x0 0x0 +#define MX35_PAD_ATA_RESET_B__ESDHC3_DAT3 0x274 0x6d8 0x828 0x1 0x1 +#define MX35_PAD_ATA_RESET_B__USB_TOP_USBOTG_DATA_0 0x274 0x6d8 0x9a4 0x2 0x1 +#define MX35_PAD_ATA_RESET_B__IPU_DISPB_SD_D_O 0x274 0x6d8 0x000 0x3 0x0 +#define MX35_PAD_ATA_RESET_B__CSPI2_RDY 0x274 0x6d8 0x7e4 0x4 0x2 +#define MX35_PAD_ATA_RESET_B__GPIO2_11 0x274 0x6d8 0x870 0x5 0x1 +#define MX35_PAD_ATA_RESET_B__IPU_DIAGB_5 0x274 0x6d8 0x000 0x6 0x0 +#define MX35_PAD_ATA_RESET_B__ARM11P_TOP_MAX0_HMASTER_1 0x274 0x6d8 0x000 0x7 0x0 +#define MX35_PAD_ATA_IORDY__ATA_IORDY 0x278 0x6dc 0x000 0x0 0x0 +#define MX35_PAD_ATA_IORDY__ESDHC3_DAT4 0x278 0x6dc 0x000 0x1 0x0 +#define MX35_PAD_ATA_IORDY__USB_TOP_USBOTG_DATA_1 0x278 0x6dc 0x9a8 0x2 0x1 +#define MX35_PAD_ATA_IORDY__IPU_DISPB_SD_D_IO 0x278 0x6dc 0x92c 0x3 0x3 +#define MX35_PAD_ATA_IORDY__ESDHC2_DAT4 0x278 0x6dc 0x000 0x4 0x0 +#define MX35_PAD_ATA_IORDY__GPIO2_12 0x278 0x6dc 0x874 0x5 0x1 +#define MX35_PAD_ATA_IORDY__IPU_DIAGB_6 0x278 0x6dc 0x000 0x6 0x0 +#define MX35_PAD_ATA_IORDY__ARM11P_TOP_MAX0_HMASTER_2 0x278 0x6dc 0x000 0x7 0x0 +#define MX35_PAD_ATA_DATA0__ATA_DATA_0 0x27c 0x6e0 0x000 0x0 0x0 +#define MX35_PAD_ATA_DATA0__ESDHC3_DAT5 0x27c 0x6e0 0x000 0x1 0x0 +#define MX35_PAD_ATA_DATA0__USB_TOP_USBOTG_DATA_2 0x27c 0x6e0 0x9ac 0x2 0x1 +#define MX35_PAD_ATA_DATA0__IPU_DISPB_D12_VSYNC 0x27c 0x6e0 0x928 0x3 0x4 +#define MX35_PAD_ATA_DATA0__ESDHC2_DAT5 0x27c 0x6e0 0x000 0x4 0x0 +#define MX35_PAD_ATA_DATA0__GPIO2_13 0x27c 0x6e0 0x878 0x5 0x1 +#define MX35_PAD_ATA_DATA0__IPU_DIAGB_7 0x27c 0x6e0 0x000 0x6 0x0 +#define MX35_PAD_ATA_DATA0__ARM11P_TOP_MAX0_HMASTER_3 0x27c 0x6e0 0x000 0x7 0x0 +#define MX35_PAD_ATA_DATA1__ATA_DATA_1 0x280 0x6e4 0x000 0x0 0x0 +#define MX35_PAD_ATA_DATA1__ESDHC3_DAT6 0x280 0x6e4 0x000 0x1 0x0 +#define MX35_PAD_ATA_DATA1__USB_TOP_USBOTG_DATA_3 0x280 0x6e4 0x9b0 0x2 0x1 +#define MX35_PAD_ATA_DATA1__IPU_DISPB_SD_CLK 0x280 0x6e4 0x000 0x3 0x0 +#define MX35_PAD_ATA_DATA1__ESDHC2_DAT6 0x280 0x6e4 0x000 0x4 0x0 +#define MX35_PAD_ATA_DATA1__GPIO2_14 0x280 0x6e4 0x87c 0x5 0x1 +#define MX35_PAD_ATA_DATA1__IPU_DIAGB_8 0x280 0x6e4 0x000 0x6 0x0 +#define MX35_PAD_ATA_DATA1__ARM11P_TOP_TRACE_27 0x280 0x6e4 0x000 0x7 0x0 +#define MX35_PAD_ATA_DATA2__ATA_DATA_2 0x284 0x6e8 0x000 0x0 0x0 +#define MX35_PAD_ATA_DATA2__ESDHC3_DAT7 0x284 0x6e8 0x000 0x1 0x0 +#define MX35_PAD_ATA_DATA2__USB_TOP_USBOTG_DATA_4 0x284 0x6e8 0x9b4 0x2 0x1 +#define MX35_PAD_ATA_DATA2__IPU_DISPB_SER_RS 0x284 0x6e8 0x000 0x3 0x0 +#define MX35_PAD_ATA_DATA2__ESDHC2_DAT7 0x284 0x6e8 0x000 0x4 0x0 +#define MX35_PAD_ATA_DATA2__GPIO2_15 0x284 0x6e8 0x880 0x5 0x1 +#define MX35_PAD_ATA_DATA2__IPU_DIAGB_9 0x284 0x6e8 0x000 0x6 0x0 +#define MX35_PAD_ATA_DATA2__ARM11P_TOP_TRACE_28 0x284 0x6e8 0x000 0x7 0x0 +#define MX35_PAD_ATA_DATA3__ATA_DATA_3 0x288 0x6ec 0x000 0x0 0x0 +#define MX35_PAD_ATA_DATA3__ESDHC3_CLK 0x288 0x6ec 0x814 0x1 0x1 +#define MX35_PAD_ATA_DATA3__USB_TOP_USBOTG_DATA_5 0x288 0x6ec 0x9b8 0x2 0x1 +#define MX35_PAD_ATA_DATA3__CSPI2_SCLK 0x288 0x6ec 0x7e0 0x4 0x2 +#define MX35_PAD_ATA_DATA3__GPIO2_16 0x288 0x6ec 0x884 0x5 0x1 +#define MX35_PAD_ATA_DATA3__IPU_DIAGB_10 0x288 0x6ec 0x000 0x6 0x0 +#define MX35_PAD_ATA_DATA3__ARM11P_TOP_TRACE_29 0x288 0x6ec 0x000 0x7 0x0 +#define MX35_PAD_ATA_DATA4__ATA_DATA_4 0x28c 0x6f0 0x000 0x0 0x0 +#define MX35_PAD_ATA_DATA4__ESDHC3_CMD 0x28c 0x6f0 0x818 0x1 0x1 +#define MX35_PAD_ATA_DATA4__USB_TOP_USBOTG_DATA_6 0x28c 0x6f0 0x9bc 0x2 0x1 +#define MX35_PAD_ATA_DATA4__GPIO2_17 0x28c 0x6f0 0x888 0x5 0x1 +#define MX35_PAD_ATA_DATA4__IPU_DIAGB_11 0x28c 0x6f0 0x000 0x6 0x0 +#define MX35_PAD_ATA_DATA4__ARM11P_TOP_TRACE_30 0x28c 0x6f0 0x000 0x7 0x0 +#define MX35_PAD_ATA_DATA5__ATA_DATA_5 0x290 0x6f4 0x000 0x0 0x0 +#define MX35_PAD_ATA_DATA5__USB_TOP_USBOTG_DATA_7 0x290 0x6f4 0x9c0 0x2 0x1 +#define MX35_PAD_ATA_DATA5__GPIO2_18 0x290 0x6f4 0x88c 0x5 0x1 +#define MX35_PAD_ATA_DATA5__IPU_DIAGB_12 0x290 0x6f4 0x000 0x6 0x0 +#define MX35_PAD_ATA_DATA5__ARM11P_TOP_TRACE_31 0x290 0x6f4 0x000 0x7 0x0 +#define MX35_PAD_ATA_DATA6__ATA_DATA_6 0x294 0x6f8 0x000 0x0 0x0 +#define MX35_PAD_ATA_DATA6__CAN1_TXCAN 0x294 0x6f8 0x000 0x1 0x0 +#define MX35_PAD_ATA_DATA6__UART1_DTR 0x294 0x6f8 0x000 0x2 0x0 +#define MX35_PAD_ATA_DATA6__AUDMUX_AUD6_TXD 0x294 0x6f8 0x7b4 0x3 0x0 +#define MX35_PAD_ATA_DATA6__GPIO2_19 0x294 0x6f8 0x890 0x5 0x1 +#define MX35_PAD_ATA_DATA6__IPU_DIAGB_13 0x294 0x6f8 0x000 0x6 0x0 +#define MX35_PAD_ATA_DATA7__ATA_DATA_7 0x298 0x6fc 0x000 0x0 0x0 +#define MX35_PAD_ATA_DATA7__CAN1_RXCAN 0x298 0x6fc 0x7c8 0x1 0x2 +#define MX35_PAD_ATA_DATA7__UART1_DSR 0x298 0x6fc 0x000 0x2 0x0 +#define MX35_PAD_ATA_DATA7__AUDMUX_AUD6_RXD 0x298 0x6fc 0x7b0 0x3 0x0 +#define MX35_PAD_ATA_DATA7__GPIO2_20 0x298 0x6fc 0x898 0x5 0x1 +#define MX35_PAD_ATA_DATA7__IPU_DIAGB_14 0x298 0x6fc 0x000 0x6 0x0 +#define MX35_PAD_ATA_DATA8__ATA_DATA_8 0x29c 0x700 0x000 0x0 0x0 +#define MX35_PAD_ATA_DATA8__UART3_RTS 0x29c 0x700 0x99c 0x1 0x1 +#define MX35_PAD_ATA_DATA8__UART1_RI 0x29c 0x700 0x000 0x2 0x0 +#define MX35_PAD_ATA_DATA8__AUDMUX_AUD6_TXC 0x29c 0x700 0x7c0 0x3 0x0 +#define MX35_PAD_ATA_DATA8__GPIO2_21 0x29c 0x700 0x89c 0x5 0x1 +#define MX35_PAD_ATA_DATA8__IPU_DIAGB_15 0x29c 0x700 0x000 0x6 0x0 +#define MX35_PAD_ATA_DATA9__ATA_DATA_9 0x2a0 0x704 0x000 0x0 0x0 +#define MX35_PAD_ATA_DATA9__UART3_CTS 0x2a0 0x704 0x000 0x1 0x0 +#define MX35_PAD_ATA_DATA9__UART1_DCD 0x2a0 0x704 0x000 0x2 0x0 +#define MX35_PAD_ATA_DATA9__AUDMUX_AUD6_TXFS 0x2a0 0x704 0x7c4 0x3 0x0 +#define MX35_PAD_ATA_DATA9__GPIO2_22 0x2a0 0x704 0x8a0 0x5 0x1 +#define MX35_PAD_ATA_DATA9__IPU_DIAGB_16 0x2a0 0x704 0x000 0x6 0x0 +#define MX35_PAD_ATA_DATA10__ATA_DATA_10 0x2a4 0x708 0x000 0x0 0x0 +#define MX35_PAD_ATA_DATA10__UART3_RXD_MUX 0x2a4 0x708 0x9a0 0x1 0x2 +#define MX35_PAD_ATA_DATA10__AUDMUX_AUD6_RXC 0x2a4 0x708 0x7b8 0x3 0x0 +#define MX35_PAD_ATA_DATA10__GPIO2_23 0x2a4 0x708 0x8a4 0x5 0x1 +#define MX35_PAD_ATA_DATA10__IPU_DIAGB_17 0x2a4 0x708 0x000 0x6 0x0 +#define MX35_PAD_ATA_DATA11__ATA_DATA_11 0x2a8 0x70c 0x000 0x0 0x0 +#define MX35_PAD_ATA_DATA11__UART3_TXD_MUX 0x2a8 0x70c 0x000 0x1 0x0 +#define MX35_PAD_ATA_DATA11__AUDMUX_AUD6_RXFS 0x2a8 0x70c 0x7bc 0x3 0x0 +#define MX35_PAD_ATA_DATA11__GPIO2_24 0x2a8 0x70c 0x8a8 0x5 0x1 +#define MX35_PAD_ATA_DATA11__IPU_DIAGB_18 0x2a8 0x70c 0x000 0x6 0x0 +#define MX35_PAD_ATA_DATA12__ATA_DATA_12 0x2ac 0x710 0x000 0x0 0x0 +#define MX35_PAD_ATA_DATA12__I2C3_SCL 0x2ac 0x710 0x91c 0x1 0x3 +#define MX35_PAD_ATA_DATA12__GPIO2_25 0x2ac 0x710 0x8ac 0x5 0x1 +#define MX35_PAD_ATA_DATA12__IPU_DIAGB_19 0x2ac 0x710 0x000 0x6 0x0 +#define MX35_PAD_ATA_DATA13__ATA_DATA_13 0x2b0 0x714 0x000 0x0 0x0 +#define MX35_PAD_ATA_DATA13__I2C3_SDA 0x2b0 0x714 0x920 0x1 0x3 +#define MX35_PAD_ATA_DATA13__GPIO2_26 0x2b0 0x714 0x8b0 0x5 0x1 +#define MX35_PAD_ATA_DATA13__IPU_DIAGB_20 0x2b0 0x714 0x000 0x6 0x0 +#define MX35_PAD_ATA_DATA14__ATA_DATA_14 0x2b4 0x718 0x000 0x0 0x0 +#define MX35_PAD_ATA_DATA14__IPU_CSI_D_0 0x2b4 0x718 0x930 0x1 0x2 +#define MX35_PAD_ATA_DATA14__KPP_ROW_0 0x2b4 0x718 0x970 0x3 0x2 +#define MX35_PAD_ATA_DATA14__GPIO2_27 0x2b4 0x718 0x8b4 0x5 0x1 +#define MX35_PAD_ATA_DATA14__IPU_DIAGB_21 0x2b4 0x718 0x000 0x6 0x0 +#define MX35_PAD_ATA_DATA15__ATA_DATA_15 0x2b8 0x71c 0x000 0x0 0x0 +#define MX35_PAD_ATA_DATA15__IPU_CSI_D_1 0x2b8 0x71c 0x934 0x1 0x2 +#define MX35_PAD_ATA_DATA15__KPP_ROW_1 0x2b8 0x71c 0x974 0x3 0x2 +#define MX35_PAD_ATA_DATA15__GPIO2_28 0x2b8 0x71c 0x8b8 0x5 0x1 +#define MX35_PAD_ATA_DATA15__IPU_DIAGB_22 0x2b8 0x71c 0x000 0x6 0x0 +#define MX35_PAD_ATA_INTRQ__ATA_INTRQ 0x2bc 0x720 0x000 0x0 0x0 +#define MX35_PAD_ATA_INTRQ__IPU_CSI_D_2 0x2bc 0x720 0x938 0x1 0x3 +#define MX35_PAD_ATA_INTRQ__KPP_ROW_2 0x2bc 0x720 0x978 0x3 0x2 +#define MX35_PAD_ATA_INTRQ__GPIO2_29 0x2bc 0x720 0x8bc 0x5 0x1 +#define MX35_PAD_ATA_INTRQ__IPU_DIAGB_23 0x2bc 0x720 0x000 0x6 0x0 +#define MX35_PAD_ATA_BUFF_EN__ATA_BUFFER_EN 0x2c0 0x724 0x000 0x0 0x0 +#define MX35_PAD_ATA_BUFF_EN__IPU_CSI_D_3 0x2c0 0x724 0x93c 0x1 0x3 +#define MX35_PAD_ATA_BUFF_EN__KPP_ROW_3 0x2c0 0x724 0x97c 0x3 0x2 +#define MX35_PAD_ATA_BUFF_EN__GPIO2_30 0x2c0 0x724 0x8c4 0x5 0x1 +#define MX35_PAD_ATA_BUFF_EN__IPU_DIAGB_24 0x2c0 0x724 0x000 0x6 0x0 +#define MX35_PAD_ATA_DMARQ__ATA_DMARQ 0x2c4 0x728 0x000 0x0 0x0 +#define MX35_PAD_ATA_DMARQ__IPU_CSI_D_4 0x2c4 0x728 0x940 0x1 0x2 +#define MX35_PAD_ATA_DMARQ__KPP_COL_0 0x2c4 0x728 0x950 0x3 0x2 +#define MX35_PAD_ATA_DMARQ__GPIO2_31 0x2c4 0x728 0x8c8 0x5 0x1 +#define MX35_PAD_ATA_DMARQ__IPU_DIAGB_25 0x2c4 0x728 0x000 0x6 0x0 +#define MX35_PAD_ATA_DMARQ__ECT_CTI_TRIG_IN1_4 0x2c4 0x728 0x000 0x7 0x0 +#define MX35_PAD_ATA_DA0__ATA_DA_0 0x2c8 0x72c 0x000 0x0 0x0 +#define MX35_PAD_ATA_DA0__IPU_CSI_D_5 0x2c8 0x72c 0x944 0x1 0x2 +#define MX35_PAD_ATA_DA0__KPP_COL_1 0x2c8 0x72c 0x954 0x3 0x2 +#define MX35_PAD_ATA_DA0__GPIO3_0 0x2c8 0x72c 0x8e8 0x5 0x1 +#define MX35_PAD_ATA_DA0__IPU_DIAGB_26 0x2c8 0x72c 0x000 0x6 0x0 +#define MX35_PAD_ATA_DA0__ECT_CTI_TRIG_IN1_5 0x2c8 0x72c 0x000 0x7 0x0 +#define MX35_PAD_ATA_DA1__ATA_DA_1 0x2cc 0x730 0x000 0x0 0x0 +#define MX35_PAD_ATA_DA1__IPU_CSI_D_6 0x2cc 0x730 0x948 0x1 0x2 +#define MX35_PAD_ATA_DA1__KPP_COL_2 0x2cc 0x730 0x958 0x3 0x2 +#define MX35_PAD_ATA_DA1__GPIO3_1 0x2cc 0x730 0x000 0x5 0x0 +#define MX35_PAD_ATA_DA1__IPU_DIAGB_27 0x2cc 0x730 0x000 0x6 0x0 +#define MX35_PAD_ATA_DA1__ECT_CTI_TRIG_IN1_6 0x2cc 0x730 0x000 0x7 0x0 +#define MX35_PAD_ATA_DA2__ATA_DA_2 0x2d0 0x734 0x000 0x0 0x0 +#define MX35_PAD_ATA_DA2__IPU_CSI_D_7 0x2d0 0x734 0x94c 0x1 0x2 +#define MX35_PAD_ATA_DA2__KPP_COL_3 0x2d0 0x734 0x95c 0x3 0x2 +#define MX35_PAD_ATA_DA2__GPIO3_2 0x2d0 0x734 0x000 0x5 0x0 +#define MX35_PAD_ATA_DA2__IPU_DIAGB_28 0x2d0 0x734 0x000 0x6 0x0 +#define MX35_PAD_ATA_DA2__ECT_CTI_TRIG_IN1_7 0x2d0 0x734 0x000 0x7 0x0 +#define MX35_PAD_MLB_CLK__MLB_MLBCLK 0x2d4 0x738 0x000 0x0 0x0 +#define MX35_PAD_MLB_CLK__GPIO3_3 0x2d4 0x738 0x000 0x5 0x0 +#define MX35_PAD_MLB_DAT__MLB_MLBDAT 0x2d8 0x73c 0x000 0x0 0x0 +#define MX35_PAD_MLB_DAT__GPIO3_4 0x2d8 0x73c 0x904 0x5 0x1 +#define MX35_PAD_MLB_SIG__MLB_MLBSIG 0x2dc 0x740 0x000 0x0 0x0 +#define MX35_PAD_MLB_SIG__GPIO3_5 0x2dc 0x740 0x908 0x5 0x1 +#define MX35_PAD_FEC_TX_CLK__FEC_TX_CLK 0x2e0 0x744 0x000 0x0 0x0 +#define MX35_PAD_FEC_TX_CLK__ESDHC1_DAT4 0x2e0 0x744 0x804 0x1 0x1 +#define MX35_PAD_FEC_TX_CLK__UART3_RXD_MUX 0x2e0 0x744 0x9a0 0x2 0x3 +#define MX35_PAD_FEC_TX_CLK__USB_TOP_USBH2_DIR 0x2e0 0x744 0x9ec 0x3 0x1 +#define MX35_PAD_FEC_TX_CLK__CSPI2_MOSI 0x2e0 0x744 0x7ec 0x4 0x3 +#define MX35_PAD_FEC_TX_CLK__GPIO3_6 0x2e0 0x744 0x90c 0x5 0x1 +#define MX35_PAD_FEC_TX_CLK__IPU_DISPB_D12_VSYNC 0x2e0 0x744 0x928 0x6 0x5 +#define MX35_PAD_FEC_TX_CLK__ARM11P_TOP_EVNTBUS_0 0x2e0 0x744 0x000 0x7 0x0 +#define MX35_PAD_FEC_RX_CLK__FEC_RX_CLK 0x2e4 0x748 0x000 0x0 0x0 +#define MX35_PAD_FEC_RX_CLK__ESDHC1_DAT5 0x2e4 0x748 0x808 0x1 0x1 +#define MX35_PAD_FEC_RX_CLK__UART3_TXD_MUX 0x2e4 0x748 0x000 0x2 0x0 +#define MX35_PAD_FEC_RX_CLK__USB_TOP_USBH2_STP 0x2e4 0x748 0x000 0x3 0x0 +#define MX35_PAD_FEC_RX_CLK__CSPI2_MISO 0x2e4 0x748 0x7e8 0x4 0x3 +#define MX35_PAD_FEC_RX_CLK__GPIO3_7 0x2e4 0x748 0x910 0x5 0x1 +#define MX35_PAD_FEC_RX_CLK__IPU_DISPB_SD_D_I 0x2e4 0x748 0x92c 0x6 0x4 +#define MX35_PAD_FEC_RX_CLK__ARM11P_TOP_EVNTBUS_1 0x2e4 0x748 0x000 0x7 0x0 +#define MX35_PAD_FEC_RX_DV__FEC_RX_DV 0x2e8 0x74c 0x000 0x0 0x0 +#define MX35_PAD_FEC_RX_DV__ESDHC1_DAT6 0x2e8 0x74c 0x80c 0x1 0x1 +#define MX35_PAD_FEC_RX_DV__UART3_RTS 0x2e8 0x74c 0x99c 0x2 0x2 +#define MX35_PAD_FEC_RX_DV__USB_TOP_USBH2_NXT 0x2e8 0x74c 0x9f0 0x3 0x1 +#define MX35_PAD_FEC_RX_DV__CSPI2_SCLK 0x2e8 0x74c 0x7e0 0x4 0x3 +#define MX35_PAD_FEC_RX_DV__GPIO3_8 0x2e8 0x74c 0x914 0x5 0x1 +#define MX35_PAD_FEC_RX_DV__IPU_DISPB_SD_CLK 0x2e8 0x74c 0x000 0x6 0x0 +#define MX35_PAD_FEC_RX_DV__ARM11P_TOP_EVNTBUS_2 0x2e8 0x74c 0x000 0x7 0x0 +#define MX35_PAD_FEC_COL__FEC_COL 0x2ec 0x750 0x000 0x0 0x0 +#define MX35_PAD_FEC_COL__ESDHC1_DAT7 0x2ec 0x750 0x810 0x1 0x1 +#define MX35_PAD_FEC_COL__UART3_CTS 0x2ec 0x750 0x000 0x2 0x0 +#define MX35_PAD_FEC_COL__USB_TOP_USBH2_DATA_0 0x2ec 0x750 0x9cc 0x3 0x1 +#define MX35_PAD_FEC_COL__CSPI2_RDY 0x2ec 0x750 0x7e4 0x4 0x3 +#define MX35_PAD_FEC_COL__GPIO3_9 0x2ec 0x750 0x918 0x5 0x1 +#define MX35_PAD_FEC_COL__IPU_DISPB_SER_RS 0x2ec 0x750 0x000 0x6 0x0 +#define MX35_PAD_FEC_COL__ARM11P_TOP_EVNTBUS_3 0x2ec 0x750 0x000 0x7 0x0 +#define MX35_PAD_FEC_RDATA0__FEC_RDATA_0 0x2f0 0x754 0x000 0x0 0x0 +#define MX35_PAD_FEC_RDATA0__PWM_PWMO 0x2f0 0x754 0x000 0x1 0x0 +#define MX35_PAD_FEC_RDATA0__UART3_DTR 0x2f0 0x754 0x000 0x2 0x0 +#define MX35_PAD_FEC_RDATA0__USB_TOP_USBH2_DATA_1 0x2f0 0x754 0x9d0 0x3 0x1 +#define MX35_PAD_FEC_RDATA0__CSPI2_SS0 0x2f0 0x754 0x7f0 0x4 0x2 +#define MX35_PAD_FEC_RDATA0__GPIO3_10 0x2f0 0x754 0x8ec 0x5 0x1 +#define MX35_PAD_FEC_RDATA0__IPU_DISPB_CS1 0x2f0 0x754 0x000 0x6 0x0 +#define MX35_PAD_FEC_RDATA0__ARM11P_TOP_EVNTBUS_4 0x2f0 0x754 0x000 0x7 0x0 +#define MX35_PAD_FEC_TDATA0__FEC_TDATA_0 0x2f4 0x758 0x000 0x0 0x0 +#define MX35_PAD_FEC_TDATA0__SPDIF_SPDIF_OUT1 0x2f4 0x758 0x000 0x1 0x0 +#define MX35_PAD_FEC_TDATA0__UART3_DSR 0x2f4 0x758 0x000 0x2 0x0 +#define MX35_PAD_FEC_TDATA0__USB_TOP_USBH2_DATA_2 0x2f4 0x758 0x9d4 0x3 0x1 +#define MX35_PAD_FEC_TDATA0__CSPI2_SS1 0x2f4 0x758 0x7f4 0x4 0x2 +#define MX35_PAD_FEC_TDATA0__GPIO3_11 0x2f4 0x758 0x8f0 0x5 0x1 +#define MX35_PAD_FEC_TDATA0__IPU_DISPB_CS0 0x2f4 0x758 0x000 0x6 0x0 +#define MX35_PAD_FEC_TDATA0__ARM11P_TOP_EVNTBUS_5 0x2f4 0x758 0x000 0x7 0x0 +#define MX35_PAD_FEC_TX_EN__FEC_TX_EN 0x2f8 0x75c 0x000 0x0 0x0 +#define MX35_PAD_FEC_TX_EN__SPDIF_SPDIF_IN1 0x2f8 0x75c 0x998 0x1 0x3 +#define MX35_PAD_FEC_TX_EN__UART3_RI 0x2f8 0x75c 0x000 0x2 0x0 +#define MX35_PAD_FEC_TX_EN__USB_TOP_USBH2_DATA_3 0x2f8 0x75c 0x9d8 0x3 0x1 +#define MX35_PAD_FEC_TX_EN__GPIO3_12 0x2f8 0x75c 0x8f4 0x5 0x1 +#define MX35_PAD_FEC_TX_EN__IPU_DISPB_PAR_RS 0x2f8 0x75c 0x000 0x6 0x0 +#define MX35_PAD_FEC_TX_EN__ARM11P_TOP_EVNTBUS_6 0x2f8 0x75c 0x000 0x7 0x0 +#define MX35_PAD_FEC_MDC__FEC_MDC 0x2fc 0x760 0x000 0x0 0x0 +#define MX35_PAD_FEC_MDC__CAN2_TXCAN 0x2fc 0x760 0x000 0x1 0x0 +#define MX35_PAD_FEC_MDC__UART3_DCD 0x2fc 0x760 0x000 0x2 0x0 +#define MX35_PAD_FEC_MDC__USB_TOP_USBH2_DATA_4 0x2fc 0x760 0x9dc 0x3 0x1 +#define MX35_PAD_FEC_MDC__GPIO3_13 0x2fc 0x760 0x8f8 0x5 0x1 +#define MX35_PAD_FEC_MDC__IPU_DISPB_WR 0x2fc 0x760 0x000 0x6 0x0 +#define MX35_PAD_FEC_MDC__ARM11P_TOP_EVNTBUS_7 0x2fc 0x760 0x000 0x7 0x0 +#define MX35_PAD_FEC_MDIO__FEC_MDIO 0x300 0x764 0x000 0x0 0x0 +#define MX35_PAD_FEC_MDIO__CAN2_RXCAN 0x300 0x764 0x7cc 0x1 0x2 +#define MX35_PAD_FEC_MDIO__USB_TOP_USBH2_DATA_5 0x300 0x764 0x9e0 0x3 0x1 +#define MX35_PAD_FEC_MDIO__GPIO3_14 0x300 0x764 0x8fc 0x5 0x1 +#define MX35_PAD_FEC_MDIO__IPU_DISPB_RD 0x300 0x764 0x000 0x6 0x0 +#define MX35_PAD_FEC_MDIO__ARM11P_TOP_EVNTBUS_8 0x300 0x764 0x000 0x7 0x0 +#define MX35_PAD_FEC_TX_ERR__FEC_TX_ERR 0x304 0x768 0x000 0x0 0x0 +#define MX35_PAD_FEC_TX_ERR__OWIRE_LINE 0x304 0x768 0x990 0x1 0x2 +#define MX35_PAD_FEC_TX_ERR__SPDIF_SPDIF_EXTCLK 0x304 0x768 0x994 0x2 0x4 +#define MX35_PAD_FEC_TX_ERR__USB_TOP_USBH2_DATA_6 0x304 0x768 0x9e4 0x3 0x1 +#define MX35_PAD_FEC_TX_ERR__GPIO3_15 0x304 0x768 0x900 0x5 0x1 +#define MX35_PAD_FEC_TX_ERR__IPU_DISPB_D0_VSYNC 0x304 0x768 0x924 0x6 0x3 +#define MX35_PAD_FEC_TX_ERR__ARM11P_TOP_EVNTBUS_9 0x304 0x768 0x000 0x7 0x0 +#define MX35_PAD_FEC_RX_ERR__FEC_RX_ERR 0x308 0x76c 0x000 0x0 0x0 +#define MX35_PAD_FEC_RX_ERR__IPU_CSI_D_0 0x308 0x76c 0x930 0x1 0x3 +#define MX35_PAD_FEC_RX_ERR__USB_TOP_USBH2_DATA_7 0x308 0x76c 0x9e8 0x3 0x1 +#define MX35_PAD_FEC_RX_ERR__KPP_COL_4 0x308 0x76c 0x960 0x4 0x1 +#define MX35_PAD_FEC_RX_ERR__GPIO3_16 0x308 0x76c 0x000 0x5 0x0 +#define MX35_PAD_FEC_RX_ERR__IPU_DISPB_SD_D_IO 0x308 0x76c 0x92c 0x6 0x5 +#define MX35_PAD_FEC_CRS__FEC_CRS 0x30c 0x770 0x000 0x0 0x0 +#define MX35_PAD_FEC_CRS__IPU_CSI_D_1 0x30c 0x770 0x934 0x1 0x3 +#define MX35_PAD_FEC_CRS__USB_TOP_USBH2_PWR 0x30c 0x770 0x000 0x3 0x0 +#define MX35_PAD_FEC_CRS__KPP_COL_5 0x30c 0x770 0x964 0x4 0x1 +#define MX35_PAD_FEC_CRS__GPIO3_17 0x30c 0x770 0x000 0x5 0x0 +#define MX35_PAD_FEC_CRS__IPU_FLASH_STROBE 0x30c 0x770 0x000 0x6 0x0 +#define MX35_PAD_FEC_RDATA1__FEC_RDATA_1 0x310 0x774 0x000 0x0 0x0 +#define MX35_PAD_FEC_RDATA1__IPU_CSI_D_2 0x310 0x774 0x938 0x1 0x4 +#define MX35_PAD_FEC_RDATA1__AUDMUX_AUD6_RXC 0x310 0x774 0x000 0x2 0x0 +#define MX35_PAD_FEC_RDATA1__USB_TOP_USBH2_OC 0x310 0x774 0x9f4 0x3 0x2 +#define MX35_PAD_FEC_RDATA1__KPP_COL_6 0x310 0x774 0x968 0x4 0x1 +#define MX35_PAD_FEC_RDATA1__GPIO3_18 0x310 0x774 0x000 0x5 0x0 +#define MX35_PAD_FEC_RDATA1__IPU_DISPB_BE0 0x310 0x774 0x000 0x6 0x0 +#define MX35_PAD_FEC_TDATA1__FEC_TDATA_1 0x314 0x778 0x000 0x0 0x0 +#define MX35_PAD_FEC_TDATA1__IPU_CSI_D_3 0x314 0x778 0x93c 0x1 0x4 +#define MX35_PAD_FEC_TDATA1__AUDMUX_AUD6_RXFS 0x314 0x778 0x7bc 0x2 0x1 +#define MX35_PAD_FEC_TDATA1__KPP_COL_7 0x314 0x778 0x96c 0x4 0x1 +#define MX35_PAD_FEC_TDATA1__GPIO3_19 0x314 0x778 0x000 0x5 0x0 +#define MX35_PAD_FEC_TDATA1__IPU_DISPB_BE1 0x314 0x778 0x000 0x6 0x0 +#define MX35_PAD_FEC_RDATA2__FEC_RDATA_2 0x318 0x77c 0x000 0x0 0x0 +#define MX35_PAD_FEC_RDATA2__IPU_CSI_D_4 0x318 0x77c 0x940 0x1 0x3 +#define MX35_PAD_FEC_RDATA2__AUDMUX_AUD6_TXD 0x318 0x77c 0x7b4 0x2 0x1 +#define MX35_PAD_FEC_RDATA2__KPP_ROW_4 0x318 0x77c 0x980 0x4 0x1 +#define MX35_PAD_FEC_RDATA2__GPIO3_20 0x318 0x77c 0x000 0x5 0x0 +#define MX35_PAD_FEC_TDATA2__FEC_TDATA_2 0x31c 0x780 0x000 0x0 0x0 +#define MX35_PAD_FEC_TDATA2__IPU_CSI_D_5 0x31c 0x780 0x944 0x1 0x3 +#define MX35_PAD_FEC_TDATA2__AUDMUX_AUD6_RXD 0x31c 0x780 0x7b0 0x2 0x1 +#define MX35_PAD_FEC_TDATA2__KPP_ROW_5 0x31c 0x780 0x984 0x4 0x1 +#define MX35_PAD_FEC_TDATA2__GPIO3_21 0x31c 0x780 0x000 0x5 0x0 +#define MX35_PAD_FEC_RDATA3__FEC_RDATA_3 0x320 0x784 0x000 0x0 0x0 +#define MX35_PAD_FEC_RDATA3__IPU_CSI_D_6 0x320 0x784 0x948 0x1 0x3 +#define MX35_PAD_FEC_RDATA3__AUDMUX_AUD6_TXC 0x320 0x784 0x7c0 0x2 0x1 +#define MX35_PAD_FEC_RDATA3__KPP_ROW_6 0x320 0x784 0x988 0x4 0x1 +#define MX35_PAD_FEC_RDATA3__GPIO3_22 0x320 0x784 0x000 0x6 0x0 +#define MX35_PAD_FEC_TDATA3__FEC_TDATA_3 0x324 0x788 0x000 0x0 0x0 +#define MX35_PAD_FEC_TDATA3__IPU_CSI_D_7 0x324 0x788 0x94c 0x1 0x3 +#define MX35_PAD_FEC_TDATA3__AUDMUX_AUD6_TXFS 0x324 0x788 0x7c4 0x2 0x1 +#define MX35_PAD_FEC_TDATA3__KPP_ROW_7 0x324 0x788 0x98c 0x4 0x1 +#define MX35_PAD_FEC_TDATA3__GPIO3_23 0x324 0x788 0x000 0x5 0x0 +#define MX35_PAD_EXT_ARMCLK__CCM_EXT_ARMCLK 0x000 0x78c 0x000 0x0 0x0 +#define MX35_PAD_TEST_MODE__TCU_TEST_MODE 0x000 0x790 0x000 0x0 0x0 + +#endif /* __DTS_IMX35_PINFUNC_H */ diff --git a/arch/arm/boot/dts/imx51-apf51.dts b/arch/arm/boot/dts/imx51-apf51.dts index 92d3a66a69e2..2bcf6981d490 100644 --- a/arch/arm/boot/dts/imx51-apf51.dts +++ b/arch/arm/boot/dts/imx51-apf51.dts @@ -15,7 +15,7 @@ */ /dts-v1/; -/include/ "imx51.dtsi" +#include "imx51.dtsi" / { model = "Armadeus Systems APF51 module"; diff --git a/arch/arm/boot/dts/imx51-apf51dev.dts b/arch/arm/boot/dts/imx51-apf51dev.dts new file mode 100644 index 000000000000..123fe84e0e8c --- /dev/null +++ b/arch/arm/boot/dts/imx51-apf51dev.dts @@ -0,0 +1,97 @@ +/* + * Copyright 2013 Armadeus Systems - <support@armadeus.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/* APF51Dev is a docking board for the APF51 SOM */ +#include "imx51-apf51.dts" + +/ { + model = "Armadeus Systems APF51Dev docking/development board"; + compatible = "armadeus,imx51-apf51dev", "armadeus,imx51-apf51", "fsl,imx51"; + + gpio-keys { + compatible = "gpio-keys"; + + user-key { + label = "user"; + gpios = <&gpio1 3 0>; + linux,code = <256>; /* BTN_0 */ + }; + }; + + leds { + compatible = "gpio-leds"; + + user { + label = "Heartbeat"; + gpios = <&gpio1 2 0>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1_1>; + fsl,spi-num-chipselects = <2>; + cs-gpios = <&gpio4 24 0>, <&gpio4 25 0>; + status = "okay"; +}; + +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2_1>; + fsl,spi-num-chipselects = <2>; + cs-gpios = <&gpio3 28 1>, <&gpio3 27 1>; + status = "okay"; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1_1>; + cd-gpios = <&gpio2 29 0>; + bus-width = <4>; + status = "okay"; +}; + +&esdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc2_1>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2_2>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + MX51_PAD_EIM_EB2__GPIO2_22 0x0C5 + MX51_PAD_EIM_EB3__GPIO2_23 0x0C5 + MX51_PAD_EIM_CS4__GPIO2_29 0x100 + MX51_PAD_NANDF_D13__GPIO3_27 0x0C5 + MX51_PAD_NANDF_D12__GPIO3_28 0x0C5 + MX51_PAD_CSPI1_SS0__GPIO4_24 0x0C5 + MX51_PAD_CSPI1_SS1__GPIO4_25 0x0C5 + MX51_PAD_GPIO1_2__GPIO1_2 0x0C5 + MX51_PAD_GPIO1_3__GPIO1_3 0x0C5 + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index aab6e43219af..6dd9486c755b 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -11,7 +11,7 @@ */ /dts-v1/; -/include/ "imx51.dtsi" +#include "imx51.dtsi" / { model = "Freescale i.MX51 Babbage Board"; @@ -222,13 +222,13 @@ hog { pinctrl_hog: hoggrp { fsl,pins = < - 694 0x20d5 /* MX51_PAD_GPIO1_0__SD1_CD */ - 697 0x20d5 /* MX51_PAD_GPIO1_1__SD1_WP */ - 737 0x100 /* MX51_PAD_GPIO1_5__GPIO1_5 */ - 740 0x100 /* MX51_PAD_GPIO1_6__GPIO1_6 */ - 121 0x5 /* MX51_PAD_EIM_A27__GPIO2_21 */ - 402 0x85 /* MX51_PAD_CSPI1_SS0__GPIO4_24 */ - 405 0x85 /* MX51_PAD_CSPI1_SS1__GPIO4_25 */ + MX51_PAD_GPIO1_0__SD1_CD 0x20d5 + MX51_PAD_GPIO1_1__SD1_WP 0x20d5 + MX51_PAD_GPIO1_5__GPIO1_5 0x100 + MX51_PAD_GPIO1_6__GPIO1_6 0x100 + MX51_PAD_EIM_A27__GPIO2_21 0x5 + MX51_PAD_CSPI1_SS0__GPIO4_24 0x85 + MX51_PAD_CSPI1_SS1__GPIO4_25 0x85 >; }; }; diff --git a/arch/arm/boot/dts/imx51-pinfunc.h b/arch/arm/boot/dts/imx51-pinfunc.h new file mode 100644 index 000000000000..9eb92abaeb6d --- /dev/null +++ b/arch/arm/boot/dts/imx51-pinfunc.h @@ -0,0 +1,773 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __DTS_IMX51_PINFUNC_H +#define __DTS_IMX51_PINFUNC_H + +/* + * The pin function ID is a tuple of + * <mux_reg conf_reg input_reg mux_mode input_val> + */ +#define MX51_PAD_EIM_D16__AUD4_RXFS 0x05c 0x3f0 0x000 0x5 0x0 +#define MX51_PAD_EIM_D16__AUD5_TXD 0x05c 0x3f0 0x8d8 0x7 0x0 +#define MX51_PAD_EIM_D16__EIM_D16 0x05c 0x3f0 0x000 0x0 0x0 +#define MX51_PAD_EIM_D16__GPIO2_0 0x05c 0x3f0 0x000 0x1 0x0 +#define MX51_PAD_EIM_D16__I2C1_SDA 0x05c 0x3f0 0x9b4 0x4 0x0 +#define MX51_PAD_EIM_D16__UART2_CTS 0x05c 0x3f0 0x000 0x3 0x0 +#define MX51_PAD_EIM_D16__USBH2_DATA0 0x05c 0x3f0 0x000 0x2 0x0 +#define MX51_PAD_EIM_D17__AUD5_RXD 0x060 0x3f4 0x8d4 0x7 0x0 +#define MX51_PAD_EIM_D17__EIM_D17 0x060 0x3f4 0x000 0x0 0x0 +#define MX51_PAD_EIM_D17__GPIO2_1 0x060 0x3f4 0x000 0x1 0x0 +#define MX51_PAD_EIM_D17__UART2_RXD 0x060 0x3f4 0x9ec 0x3 0x0 +#define MX51_PAD_EIM_D17__UART3_CTS 0x060 0x3f4 0x000 0x4 0x0 +#define MX51_PAD_EIM_D17__USBH2_DATA1 0x060 0x3f4 0x000 0x2 0x0 +#define MX51_PAD_EIM_D18__AUD5_TXC 0x064 0x3f8 0x8e4 0x7 0x0 +#define MX51_PAD_EIM_D18__EIM_D18 0x064 0x3f8 0x000 0x0 0x0 +#define MX51_PAD_EIM_D18__GPIO2_2 0x064 0x3f8 0x000 0x1 0x0 +#define MX51_PAD_EIM_D18__UART2_TXD 0x064 0x3f8 0x000 0x3 0x0 +#define MX51_PAD_EIM_D18__UART3_RTS 0x064 0x3f8 0x9f0 0x4 0x1 +#define MX51_PAD_EIM_D18__USBH2_DATA2 0x064 0x3f8 0x000 0x2 0x0 +#define MX51_PAD_EIM_D19__AUD4_RXC 0x068 0x3fc 0x000 0x5 0x0 +#define MX51_PAD_EIM_D19__AUD5_TXFS 0x068 0x3fc 0x8e8 0x7 0x0 +#define MX51_PAD_EIM_D19__EIM_D19 0x068 0x3fc 0x000 0x0 0x0 +#define MX51_PAD_EIM_D19__GPIO2_3 0x068 0x3fc 0x000 0x1 0x0 +#define MX51_PAD_EIM_D19__I2C1_SCL 0x068 0x3fc 0x9b0 0x4 0x0 +#define MX51_PAD_EIM_D19__UART2_RTS 0x068 0x3fc 0x9e8 0x3 0x1 +#define MX51_PAD_EIM_D19__USBH2_DATA3 0x068 0x3fc 0x000 0x2 0x0 +#define MX51_PAD_EIM_D20__AUD4_TXD 0x06c 0x400 0x8c8 0x5 0x0 +#define MX51_PAD_EIM_D20__EIM_D20 0x06c 0x400 0x000 0x0 0x0 +#define MX51_PAD_EIM_D20__GPIO2_4 0x06c 0x400 0x000 0x1 0x0 +#define MX51_PAD_EIM_D20__SRTC_ALARM_DEB 0x06c 0x400 0x000 0x4 0x0 +#define MX51_PAD_EIM_D20__USBH2_DATA4 0x06c 0x400 0x000 0x2 0x0 +#define MX51_PAD_EIM_D21__AUD4_RXD 0x070 0x404 0x8c4 0x5 0x0 +#define MX51_PAD_EIM_D21__EIM_D21 0x070 0x404 0x000 0x0 0x0 +#define MX51_PAD_EIM_D21__GPIO2_5 0x070 0x404 0x000 0x1 0x0 +#define MX51_PAD_EIM_D21__SRTC_ALARM_DEB 0x070 0x404 0x000 0x3 0x0 +#define MX51_PAD_EIM_D21__USBH2_DATA5 0x070 0x404 0x000 0x2 0x0 +#define MX51_PAD_EIM_D22__AUD4_TXC 0x074 0x408 0x8cc 0x5 0x0 +#define MX51_PAD_EIM_D22__EIM_D22 0x074 0x408 0x000 0x0 0x0 +#define MX51_PAD_EIM_D22__GPIO2_6 0x074 0x408 0x000 0x1 0x0 +#define MX51_PAD_EIM_D22__USBH2_DATA6 0x074 0x408 0x000 0x2 0x0 +#define MX51_PAD_EIM_D23__AUD4_TXFS 0x078 0x40c 0x8d0 0x5 0x0 +#define MX51_PAD_EIM_D23__EIM_D23 0x078 0x40c 0x000 0x0 0x0 +#define MX51_PAD_EIM_D23__GPIO2_7 0x078 0x40c 0x000 0x1 0x0 +#define MX51_PAD_EIM_D23__SPDIF_OUT1 0x078 0x40c 0x000 0x4 0x0 +#define MX51_PAD_EIM_D23__USBH2_DATA7 0x078 0x40c 0x000 0x2 0x0 +#define MX51_PAD_EIM_D24__AUD6_RXFS 0x07c 0x410 0x8f8 0x5 0x0 +#define MX51_PAD_EIM_D24__EIM_D24 0x07c 0x410 0x000 0x0 0x0 +#define MX51_PAD_EIM_D24__GPIO2_8 0x07c 0x410 0x000 0x1 0x0 +#define MX51_PAD_EIM_D24__I2C2_SDA 0x07c 0x410 0x9bc 0x4 0x0 +#define MX51_PAD_EIM_D24__UART3_CTS 0x07c 0x410 0x000 0x3 0x0 +#define MX51_PAD_EIM_D24__USBOTG_DATA0 0x07c 0x410 0x000 0x2 0x0 +#define MX51_PAD_EIM_D25__EIM_D25 0x080 0x414 0x000 0x0 0x0 +#define MX51_PAD_EIM_D25__KEY_COL6 0x080 0x414 0x9c8 0x1 0x0 +#define MX51_PAD_EIM_D25__UART2_CTS 0x080 0x414 0x000 0x4 0x0 +#define MX51_PAD_EIM_D25__UART3_RXD 0x080 0x414 0x9f4 0x3 0x0 +#define MX51_PAD_EIM_D25__USBOTG_DATA1 0x080 0x414 0x000 0x2 0x0 +#define MX51_PAD_EIM_D26__EIM_D26 0x084 0x418 0x000 0x0 0x0 +#define MX51_PAD_EIM_D26__KEY_COL7 0x084 0x418 0x9cc 0x1 0x0 +#define MX51_PAD_EIM_D26__UART2_RTS 0x084 0x418 0x9e8 0x4 0x3 +#define MX51_PAD_EIM_D26__UART3_TXD 0x084 0x418 0x000 0x3 0x0 +#define MX51_PAD_EIM_D26__USBOTG_DATA2 0x084 0x418 0x000 0x2 0x0 +#define MX51_PAD_EIM_D27__AUD6_RXC 0x088 0x41c 0x8f4 0x5 0x0 +#define MX51_PAD_EIM_D27__EIM_D27 0x088 0x41c 0x000 0x0 0x0 +#define MX51_PAD_EIM_D27__GPIO2_9 0x088 0x41c 0x000 0x1 0x0 +#define MX51_PAD_EIM_D27__I2C2_SCL 0x088 0x41c 0x9b8 0x4 0x0 +#define MX51_PAD_EIM_D27__UART3_RTS 0x088 0x41c 0x9f0 0x3 0x3 +#define MX51_PAD_EIM_D27__USBOTG_DATA3 0x088 0x41c 0x000 0x2 0x0 +#define MX51_PAD_EIM_D28__AUD6_TXD 0x08c 0x420 0x8f0 0x5 0x0 +#define MX51_PAD_EIM_D28__EIM_D28 0x08c 0x420 0x000 0x0 0x0 +#define MX51_PAD_EIM_D28__KEY_ROW4 0x08c 0x420 0x9d0 0x1 0x0 +#define MX51_PAD_EIM_D28__USBOTG_DATA4 0x08c 0x420 0x000 0x2 0x0 +#define MX51_PAD_EIM_D29__AUD6_RXD 0x090 0x424 0x8ec 0x5 0x0 +#define MX51_PAD_EIM_D29__EIM_D29 0x090 0x424 0x000 0x0 0x0 +#define MX51_PAD_EIM_D29__KEY_ROW5 0x090 0x424 0x9d4 0x1 0x0 +#define MX51_PAD_EIM_D29__USBOTG_DATA5 0x090 0x424 0x000 0x2 0x0 +#define MX51_PAD_EIM_D30__AUD6_TXC 0x094 0x428 0x8fc 0x5 0x0 +#define MX51_PAD_EIM_D30__EIM_D30 0x094 0x428 0x000 0x0 0x0 +#define MX51_PAD_EIM_D30__KEY_ROW6 0x094 0x428 0x9d8 0x1 0x0 +#define MX51_PAD_EIM_D30__USBOTG_DATA6 0x094 0x428 0x000 0x2 0x0 +#define MX51_PAD_EIM_D31__AUD6_TXFS 0x098 0x42c 0x900 0x5 0x0 +#define MX51_PAD_EIM_D31__EIM_D31 0x098 0x42c 0x000 0x0 0x0 +#define MX51_PAD_EIM_D31__KEY_ROW7 0x098 0x42c 0x9dc 0x1 0x0 +#define MX51_PAD_EIM_D31__USBOTG_DATA7 0x098 0x42c 0x000 0x2 0x0 +#define MX51_PAD_EIM_A16__EIM_A16 0x09c 0x430 0x000 0x0 0x0 +#define MX51_PAD_EIM_A16__GPIO2_10 0x09c 0x430 0x000 0x1 0x0 +#define MX51_PAD_EIM_A16__OSC_FREQ_SEL0 0x09c 0x430 0x000 0x7 0x0 +#define MX51_PAD_EIM_A17__EIM_A17 0x0a0 0x434 0x000 0x0 0x0 +#define MX51_PAD_EIM_A17__GPIO2_11 0x0a0 0x434 0x000 0x1 0x0 +#define MX51_PAD_EIM_A17__OSC_FREQ_SEL1 0x0a0 0x434 0x000 0x7 0x0 +#define MX51_PAD_EIM_A18__BOOT_LPB0 0x0a4 0x438 0x000 0x7 0x0 +#define MX51_PAD_EIM_A18__EIM_A18 0x0a4 0x438 0x000 0x0 0x0 +#define MX51_PAD_EIM_A18__GPIO2_12 0x0a4 0x438 0x000 0x1 0x0 +#define MX51_PAD_EIM_A19__BOOT_LPB1 0x0a8 0x43c 0x000 0x7 0x0 +#define MX51_PAD_EIM_A19__EIM_A19 0x0a8 0x43c 0x000 0x0 0x0 +#define MX51_PAD_EIM_A19__GPIO2_13 0x0a8 0x43c 0x000 0x1 0x0 +#define MX51_PAD_EIM_A20__BOOT_UART_SRC0 0x0ac 0x440 0x000 0x7 0x0 +#define MX51_PAD_EIM_A20__EIM_A20 0x0ac 0x440 0x000 0x0 0x0 +#define MX51_PAD_EIM_A20__GPIO2_14 0x0ac 0x440 0x000 0x1 0x0 +#define MX51_PAD_EIM_A21__BOOT_UART_SRC1 0x0b0 0x444 0x000 0x7 0x0 +#define MX51_PAD_EIM_A21__EIM_A21 0x0b0 0x444 0x000 0x0 0x0 +#define MX51_PAD_EIM_A21__GPIO2_15 0x0b0 0x444 0x000 0x1 0x0 +#define MX51_PAD_EIM_A22__EIM_A22 0x0b4 0x448 0x000 0x0 0x0 +#define MX51_PAD_EIM_A22__GPIO2_16 0x0b4 0x448 0x000 0x1 0x0 +#define MX51_PAD_EIM_A23__BOOT_HPN_EN 0x0b8 0x44c 0x000 0x7 0x0 +#define MX51_PAD_EIM_A23__EIM_A23 0x0b8 0x44c 0x000 0x0 0x0 +#define MX51_PAD_EIM_A23__GPIO2_17 0x0b8 0x44c 0x000 0x1 0x0 +#define MX51_PAD_EIM_A24__EIM_A24 0x0bc 0x450 0x000 0x0 0x0 +#define MX51_PAD_EIM_A24__GPIO2_18 0x0bc 0x450 0x000 0x1 0x0 +#define MX51_PAD_EIM_A24__USBH2_CLK 0x0bc 0x450 0x000 0x2 0x0 +#define MX51_PAD_EIM_A25__DISP1_PIN4 0x0c0 0x454 0x000 0x6 0x0 +#define MX51_PAD_EIM_A25__EIM_A25 0x0c0 0x454 0x000 0x0 0x0 +#define MX51_PAD_EIM_A25__GPIO2_19 0x0c0 0x454 0x000 0x1 0x0 +#define MX51_PAD_EIM_A25__USBH2_DIR 0x0c0 0x454 0x000 0x2 0x0 +#define MX51_PAD_EIM_A26__CSI1_DATA_EN 0x0c4 0x458 0x9a0 0x5 0x0 +#define MX51_PAD_EIM_A26__DISP2_EXT_CLK 0x0c4 0x458 0x908 0x6 0x0 +#define MX51_PAD_EIM_A26__EIM_A26 0x0c4 0x458 0x000 0x0 0x0 +#define MX51_PAD_EIM_A26__GPIO2_20 0x0c4 0x458 0x000 0x1 0x0 +#define MX51_PAD_EIM_A26__USBH2_STP 0x0c4 0x458 0x000 0x2 0x0 +#define MX51_PAD_EIM_A27__CSI2_DATA_EN 0x0c8 0x45c 0x99c 0x5 0x0 +#define MX51_PAD_EIM_A27__DISP1_PIN1 0x0c8 0x45c 0x9a4 0x6 0x0 +#define MX51_PAD_EIM_A27__EIM_A27 0x0c8 0x45c 0x000 0x0 0x0 +#define MX51_PAD_EIM_A27__GPIO2_21 0x0c8 0x45c 0x000 0x1 0x0 +#define MX51_PAD_EIM_A27__USBH2_NXT 0x0c8 0x45c 0x000 0x2 0x0 +#define MX51_PAD_EIM_EB0__EIM_EB0 0x0cc 0x460 0x000 0x0 0x0 +#define MX51_PAD_EIM_EB1__EIM_EB1 0x0d0 0x464 0x000 0x0 0x0 +#define MX51_PAD_EIM_EB2__AUD5_RXFS 0x0d4 0x468 0x8e0 0x6 0x0 +#define MX51_PAD_EIM_EB2__CSI1_D2 0x0d4 0x468 0x000 0x5 0x0 +#define MX51_PAD_EIM_EB2__EIM_EB2 0x0d4 0x468 0x000 0x0 0x0 +#define MX51_PAD_EIM_EB2__FEC_MDIO 0x0d4 0x468 0x954 0x3 0x0 +#define MX51_PAD_EIM_EB2__GPIO2_22 0x0d4 0x468 0x000 0x1 0x0 +#define MX51_PAD_EIM_EB2__GPT_CMPOUT1 0x0d4 0x468 0x000 0x7 0x0 +#define MX51_PAD_EIM_EB3__AUD5_RXC 0x0d8 0x46c 0x8dc 0x6 0x0 +#define MX51_PAD_EIM_EB3__CSI1_D3 0x0d8 0x46c 0x000 0x5 0x0 +#define MX51_PAD_EIM_EB3__EIM_EB3 0x0d8 0x46c 0x000 0x0 0x0 +#define MX51_PAD_EIM_EB3__FEC_RDATA1 0x0d8 0x46c 0x95c 0x3 0x0 +#define MX51_PAD_EIM_EB3__GPIO2_23 0x0d8 0x46c 0x000 0x1 0x0 +#define MX51_PAD_EIM_EB3__GPT_CMPOUT2 0x0d8 0x46c 0x000 0x7 0x0 +#define MX51_PAD_EIM_OE__EIM_OE 0x0dc 0x470 0x000 0x0 0x0 +#define MX51_PAD_EIM_OE__GPIO2_24 0x0dc 0x470 0x000 0x1 0x0 +#define MX51_PAD_EIM_CS0__EIM_CS0 0x0e0 0x474 0x000 0x0 0x0 +#define MX51_PAD_EIM_CS0__GPIO2_25 0x0e0 0x474 0x000 0x1 0x0 +#define MX51_PAD_EIM_CS1__EIM_CS1 0x0e4 0x478 0x000 0x0 0x0 +#define MX51_PAD_EIM_CS1__GPIO2_26 0x0e4 0x478 0x000 0x1 0x0 +#define MX51_PAD_EIM_CS2__AUD5_TXD 0x0e8 0x47c 0x8d8 0x6 0x1 +#define MX51_PAD_EIM_CS2__CSI1_D4 0x0e8 0x47c 0x000 0x5 0x0 +#define MX51_PAD_EIM_CS2__EIM_CS2 0x0e8 0x47c 0x000 0x0 0x0 +#define MX51_PAD_EIM_CS2__FEC_RDATA2 0x0e8 0x47c 0x960 0x3 0x0 +#define MX51_PAD_EIM_CS2__GPIO2_27 0x0e8 0x47c 0x000 0x1 0x0 +#define MX51_PAD_EIM_CS2__USBOTG_STP 0x0e8 0x47c 0x000 0x2 0x0 +#define MX51_PAD_EIM_CS3__AUD5_RXD 0x0ec 0x480 0x8d4 0x6 0x1 +#define MX51_PAD_EIM_CS3__CSI1_D5 0x0ec 0x480 0x000 0x5 0x0 +#define MX51_PAD_EIM_CS3__EIM_CS3 0x0ec 0x480 0x000 0x0 0x0 +#define MX51_PAD_EIM_CS3__FEC_RDATA3 0x0ec 0x480 0x964 0x3 0x0 +#define MX51_PAD_EIM_CS3__GPIO2_28 0x0ec 0x480 0x000 0x1 0x0 +#define MX51_PAD_EIM_CS3__USBOTG_NXT 0x0ec 0x480 0x000 0x2 0x0 +#define MX51_PAD_EIM_CS4__AUD5_TXC 0x0f0 0x484 0x8e4 0x6 0x1 +#define MX51_PAD_EIM_CS4__CSI1_D6 0x0f0 0x484 0x000 0x5 0x0 +#define MX51_PAD_EIM_CS4__EIM_CS4 0x0f0 0x484 0x000 0x0 0x0 +#define MX51_PAD_EIM_CS4__FEC_RX_ER 0x0f0 0x484 0x970 0x3 0x0 +#define MX51_PAD_EIM_CS4__GPIO2_29 0x0f0 0x484 0x000 0x1 0x0 +#define MX51_PAD_EIM_CS4__USBOTG_CLK 0x0f0 0x484 0x000 0x2 0x0 +#define MX51_PAD_EIM_CS5__AUD5_TXFS 0x0f4 0x488 0x8e8 0x6 0x1 +#define MX51_PAD_EIM_CS5__CSI1_D7 0x0f4 0x488 0x000 0x5 0x0 +#define MX51_PAD_EIM_CS5__DISP1_EXT_CLK 0x0f4 0x488 0x904 0x4 0x0 +#define MX51_PAD_EIM_CS5__EIM_CS5 0x0f4 0x488 0x000 0x0 0x0 +#define MX51_PAD_EIM_CS5__FEC_CRS 0x0f4 0x488 0x950 0x3 0x0 +#define MX51_PAD_EIM_CS5__GPIO2_30 0x0f4 0x488 0x000 0x1 0x0 +#define MX51_PAD_EIM_CS5__USBOTG_DIR 0x0f4 0x488 0x000 0x2 0x0 +#define MX51_PAD_EIM_DTACK__EIM_DTACK 0x0f8 0x48c 0x000 0x0 0x0 +#define MX51_PAD_EIM_DTACK__GPIO2_31 0x0f8 0x48c 0x000 0x1 0x0 +#define MX51_PAD_EIM_LBA__EIM_LBA 0x0fc 0x494 0x000 0x0 0x0 +#define MX51_PAD_EIM_LBA__GPIO3_1 0x0fc 0x494 0x978 0x1 0x0 +#define MX51_PAD_EIM_CRE__EIM_CRE 0x100 0x4a0 0x000 0x0 0x0 +#define MX51_PAD_EIM_CRE__GPIO3_2 0x100 0x4a0 0x97c 0x1 0x0 +#define MX51_PAD_DRAM_CS1__DRAM_CS1 0x104 0x4d0 0x000 0x0 0x0 +#define MX51_PAD_NANDF_WE_B__GPIO3_3 0x108 0x4e4 0x980 0x3 0x0 +#define MX51_PAD_NANDF_WE_B__NANDF_WE_B 0x108 0x4e4 0x000 0x0 0x0 +#define MX51_PAD_NANDF_WE_B__PATA_DIOW 0x108 0x4e4 0x000 0x1 0x0 +#define MX51_PAD_NANDF_WE_B__SD3_DATA0 0x108 0x4e4 0x93c 0x2 0x0 +#define MX51_PAD_NANDF_RE_B__GPIO3_4 0x10c 0x4e8 0x984 0x3 0x0 +#define MX51_PAD_NANDF_RE_B__NANDF_RE_B 0x10c 0x4e8 0x000 0x0 0x0 +#define MX51_PAD_NANDF_RE_B__PATA_DIOR 0x10c 0x4e8 0x000 0x1 0x0 +#define MX51_PAD_NANDF_RE_B__SD3_DATA1 0x10c 0x4e8 0x940 0x2 0x0 +#define MX51_PAD_NANDF_ALE__GPIO3_5 0x110 0x4ec 0x988 0x3 0x0 +#define MX51_PAD_NANDF_ALE__NANDF_ALE 0x110 0x4ec 0x000 0x0 0x0 +#define MX51_PAD_NANDF_ALE__PATA_BUFFER_EN 0x110 0x4ec 0x000 0x1 0x0 +#define MX51_PAD_NANDF_CLE__GPIO3_6 0x114 0x4f0 0x98c 0x3 0x0 +#define MX51_PAD_NANDF_CLE__NANDF_CLE 0x114 0x4f0 0x000 0x0 0x0 +#define MX51_PAD_NANDF_CLE__PATA_RESET_B 0x114 0x4f0 0x000 0x1 0x0 +#define MX51_PAD_NANDF_WP_B__GPIO3_7 0x118 0x4f4 0x990 0x3 0x0 +#define MX51_PAD_NANDF_WP_B__NANDF_WP_B 0x118 0x4f4 0x000 0x0 0x0 +#define MX51_PAD_NANDF_WP_B__PATA_DMACK 0x118 0x4f4 0x000 0x1 0x0 +#define MX51_PAD_NANDF_WP_B__SD3_DATA2 0x118 0x4f4 0x944 0x2 0x0 +#define MX51_PAD_NANDF_RB0__ECSPI2_SS1 0x11c 0x4f8 0x930 0x5 0x0 +#define MX51_PAD_NANDF_RB0__GPIO3_8 0x11c 0x4f8 0x994 0x3 0x0 +#define MX51_PAD_NANDF_RB0__NANDF_RB0 0x11c 0x4f8 0x000 0x0 0x0 +#define MX51_PAD_NANDF_RB0__PATA_DMARQ 0x11c 0x4f8 0x000 0x1 0x0 +#define MX51_PAD_NANDF_RB0__SD3_DATA3 0x11c 0x4f8 0x948 0x2 0x0 +#define MX51_PAD_NANDF_RB1__CSPI_MOSI 0x120 0x4fc 0x91c 0x6 0x0 +#define MX51_PAD_NANDF_RB1__ECSPI2_RDY 0x120 0x4fc 0x000 0x2 0x0 +#define MX51_PAD_NANDF_RB1__GPIO3_9 0x120 0x4fc 0x000 0x3 0x0 +#define MX51_PAD_NANDF_RB1__NANDF_RB1 0x120 0x4fc 0x000 0x0 0x0 +#define MX51_PAD_NANDF_RB1__PATA_IORDY 0x120 0x4fc 0x000 0x1 0x0 +#define MX51_PAD_NANDF_RB1__SD4_CMD 0x120 0x4fc 0x000 0x5 0x0 +#define MX51_PAD_NANDF_RB2__DISP2_WAIT 0x124 0x500 0x9a8 0x5 0x0 +#define MX51_PAD_NANDF_RB2__ECSPI2_SCLK 0x124 0x500 0x000 0x2 0x0 +#define MX51_PAD_NANDF_RB2__FEC_COL 0x124 0x500 0x94c 0x1 0x0 +#define MX51_PAD_NANDF_RB2__GPIO3_10 0x124 0x500 0x000 0x3 0x0 +#define MX51_PAD_NANDF_RB2__NANDF_RB2 0x124 0x500 0x000 0x0 0x0 +#define MX51_PAD_NANDF_RB2__USBH3_H3_DP 0x124 0x500 0x000 0x7 0x0 +#define MX51_PAD_NANDF_RB2__USBH3_NXT 0x124 0x500 0xa20 0x6 0x0 +#define MX51_PAD_NANDF_RB3__DISP1_WAIT 0x128 0x504 0x000 0x5 0x0 +#define MX51_PAD_NANDF_RB3__ECSPI2_MISO 0x128 0x504 0x000 0x2 0x0 +#define MX51_PAD_NANDF_RB3__FEC_RX_CLK 0x128 0x504 0x968 0x1 0x0 +#define MX51_PAD_NANDF_RB3__GPIO3_11 0x128 0x504 0x000 0x3 0x0 +#define MX51_PAD_NANDF_RB3__NANDF_RB3 0x128 0x504 0x000 0x0 0x0 +#define MX51_PAD_NANDF_RB3__USBH3_CLK 0x128 0x504 0x9f8 0x6 0x0 +#define MX51_PAD_NANDF_RB3__USBH3_H3_DM 0x128 0x504 0x000 0x7 0x0 +#define MX51_PAD_GPIO_NAND__GPIO_NAND 0x12c 0x514 0x998 0x0 0x0 +#define MX51_PAD_GPIO_NAND__PATA_INTRQ 0x12c 0x514 0x000 0x1 0x0 +#define MX51_PAD_NANDF_CS0__GPIO3_16 0x130 0x518 0x000 0x3 0x0 +#define MX51_PAD_NANDF_CS0__NANDF_CS0 0x130 0x518 0x000 0x0 0x0 +#define MX51_PAD_NANDF_CS1__GPIO3_17 0x134 0x51c 0x000 0x3 0x0 +#define MX51_PAD_NANDF_CS1__NANDF_CS1 0x134 0x51c 0x000 0x0 0x0 +#define MX51_PAD_NANDF_CS2__CSPI_SCLK 0x138 0x520 0x914 0x6 0x0 +#define MX51_PAD_NANDF_CS2__FEC_TX_ER 0x138 0x520 0x000 0x2 0x0 +#define MX51_PAD_NANDF_CS2__GPIO3_18 0x138 0x520 0x000 0x3 0x0 +#define MX51_PAD_NANDF_CS2__NANDF_CS2 0x138 0x520 0x000 0x0 0x0 +#define MX51_PAD_NANDF_CS2__PATA_CS_0 0x138 0x520 0x000 0x1 0x0 +#define MX51_PAD_NANDF_CS2__SD4_CLK 0x138 0x520 0x000 0x5 0x0 +#define MX51_PAD_NANDF_CS2__USBH3_H1_DP 0x138 0x520 0x000 0x7 0x0 +#define MX51_PAD_NANDF_CS3__FEC_MDC 0x13c 0x524 0x000 0x2 0x0 +#define MX51_PAD_NANDF_CS3__GPIO3_19 0x13c 0x524 0x000 0x3 0x0 +#define MX51_PAD_NANDF_CS3__NANDF_CS3 0x13c 0x524 0x000 0x0 0x0 +#define MX51_PAD_NANDF_CS3__PATA_CS_1 0x13c 0x524 0x000 0x1 0x0 +#define MX51_PAD_NANDF_CS3__SD4_DAT0 0x13c 0x524 0x000 0x5 0x0 +#define MX51_PAD_NANDF_CS3__USBH3_H1_DM 0x13c 0x524 0x000 0x7 0x0 +#define MX51_PAD_NANDF_CS4__FEC_TDATA1 0x140 0x528 0x000 0x2 0x0 +#define MX51_PAD_NANDF_CS4__GPIO3_20 0x140 0x528 0x000 0x3 0x0 +#define MX51_PAD_NANDF_CS4__NANDF_CS4 0x140 0x528 0x000 0x0 0x0 +#define MX51_PAD_NANDF_CS4__PATA_DA_0 0x140 0x528 0x000 0x1 0x0 +#define MX51_PAD_NANDF_CS4__SD4_DAT1 0x140 0x528 0x000 0x5 0x0 +#define MX51_PAD_NANDF_CS4__USBH3_STP 0x140 0x528 0xa24 0x7 0x0 +#define MX51_PAD_NANDF_CS5__FEC_TDATA2 0x144 0x52c 0x000 0x2 0x0 +#define MX51_PAD_NANDF_CS5__GPIO3_21 0x144 0x52c 0x000 0x3 0x0 +#define MX51_PAD_NANDF_CS5__NANDF_CS5 0x144 0x52c 0x000 0x0 0x0 +#define MX51_PAD_NANDF_CS5__PATA_DA_1 0x144 0x52c 0x000 0x1 0x0 +#define MX51_PAD_NANDF_CS5__SD4_DAT2 0x144 0x52c 0x000 0x5 0x0 +#define MX51_PAD_NANDF_CS5__USBH3_DIR 0x144 0x52c 0xa1c 0x7 0x0 +#define MX51_PAD_NANDF_CS6__CSPI_SS3 0x148 0x530 0x928 0x7 0x0 +#define MX51_PAD_NANDF_CS6__FEC_TDATA3 0x148 0x530 0x000 0x2 0x0 +#define MX51_PAD_NANDF_CS6__GPIO3_22 0x148 0x530 0x000 0x3 0x0 +#define MX51_PAD_NANDF_CS6__NANDF_CS6 0x148 0x530 0x000 0x0 0x0 +#define MX51_PAD_NANDF_CS6__PATA_DA_2 0x148 0x530 0x000 0x1 0x0 +#define MX51_PAD_NANDF_CS6__SD4_DAT3 0x148 0x530 0x000 0x5 0x0 +#define MX51_PAD_NANDF_CS7__FEC_TX_EN 0x14c 0x534 0x000 0x1 0x0 +#define MX51_PAD_NANDF_CS7__GPIO3_23 0x14c 0x534 0x000 0x3 0x0 +#define MX51_PAD_NANDF_CS7__NANDF_CS7 0x14c 0x534 0x000 0x0 0x0 +#define MX51_PAD_NANDF_CS7__SD3_CLK 0x14c 0x534 0x000 0x5 0x0 +#define MX51_PAD_NANDF_RDY_INT__ECSPI2_SS0 0x150 0x538 0x000 0x2 0x0 +#define MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK 0x150 0x538 0x974 0x1 0x0 +#define MX51_PAD_NANDF_RDY_INT__GPIO3_24 0x150 0x538 0x000 0x3 0x0 +#define MX51_PAD_NANDF_RDY_INT__NANDF_RDY_INT 0x150 0x538 0x938 0x0 0x0 +#define MX51_PAD_NANDF_RDY_INT__SD3_CMD 0x150 0x538 0x000 0x5 0x0 +#define MX51_PAD_NANDF_D15__ECSPI2_MOSI 0x154 0x53c 0x000 0x2 0x0 +#define MX51_PAD_NANDF_D15__GPIO3_25 0x154 0x53c 0x000 0x3 0x0 +#define MX51_PAD_NANDF_D15__NANDF_D15 0x154 0x53c 0x000 0x0 0x0 +#define MX51_PAD_NANDF_D15__PATA_DATA15 0x154 0x53c 0x000 0x1 0x0 +#define MX51_PAD_NANDF_D15__SD3_DAT7 0x154 0x53c 0x000 0x5 0x0 +#define MX51_PAD_NANDF_D14__ECSPI2_SS3 0x158 0x540 0x934 0x2 0x0 +#define MX51_PAD_NANDF_D14__GPIO3_26 0x158 0x540 0x000 0x3 0x0 +#define MX51_PAD_NANDF_D14__NANDF_D14 0x158 0x540 0x000 0x0 0x0 +#define MX51_PAD_NANDF_D14__PATA_DATA14 0x158 0x540 0x000 0x1 0x0 +#define MX51_PAD_NANDF_D14__SD3_DAT6 0x158 0x540 0x000 0x5 0x0 +#define MX51_PAD_NANDF_D13__ECSPI2_SS2 0x15c 0x544 0x000 0x2 0x0 +#define MX51_PAD_NANDF_D13__GPIO3_27 0x15c 0x544 0x000 0x3 0x0 +#define MX51_PAD_NANDF_D13__NANDF_D13 0x15c 0x544 0x000 0x0 0x0 +#define MX51_PAD_NANDF_D13__PATA_DATA13 0x15c 0x544 0x000 0x1 0x0 +#define MX51_PAD_NANDF_D13__SD3_DAT5 0x15c 0x544 0x000 0x5 0x0 +#define MX51_PAD_NANDF_D12__ECSPI2_SS1 0x160 0x548 0x930 0x2 0x1 +#define MX51_PAD_NANDF_D12__GPIO3_28 0x160 0x548 0x000 0x3 0x0 +#define MX51_PAD_NANDF_D12__NANDF_D12 0x160 0x548 0x000 0x0 0x0 +#define MX51_PAD_NANDF_D12__PATA_DATA12 0x160 0x548 0x000 0x1 0x0 +#define MX51_PAD_NANDF_D12__SD3_DAT4 0x160 0x548 0x000 0x5 0x0 +#define MX51_PAD_NANDF_D11__FEC_RX_DV 0x164 0x54c 0x96c 0x2 0x0 +#define MX51_PAD_NANDF_D11__GPIO3_29 0x164 0x54c 0x000 0x3 0x0 +#define MX51_PAD_NANDF_D11__NANDF_D11 0x164 0x54c 0x000 0x0 0x0 +#define MX51_PAD_NANDF_D11__PATA_DATA11 0x164 0x54c 0x000 0x1 0x0 +#define MX51_PAD_NANDF_D11__SD3_DATA3 0x164 0x54c 0x948 0x5 0x1 +#define MX51_PAD_NANDF_D10__GPIO3_30 0x168 0x550 0x000 0x3 0x0 +#define MX51_PAD_NANDF_D10__NANDF_D10 0x168 0x550 0x000 0x0 0x0 +#define MX51_PAD_NANDF_D10__PATA_DATA10 0x168 0x550 0x000 0x1 0x0 +#define MX51_PAD_NANDF_D10__SD3_DATA2 0x168 0x550 0x944 0x5 0x1 +#define MX51_PAD_NANDF_D9__FEC_RDATA0 0x16c 0x554 0x958 0x2 0x0 +#define MX51_PAD_NANDF_D9__GPIO3_31 0x16c 0x554 0x000 0x3 0x0 +#define MX51_PAD_NANDF_D9__NANDF_D9 0x16c 0x554 0x000 0x0 0x0 +#define MX51_PAD_NANDF_D9__PATA_DATA9 0x16c 0x554 0x000 0x1 0x0 +#define MX51_PAD_NANDF_D9__SD3_DATA1 0x16c 0x554 0x940 0x5 0x1 +#define MX51_PAD_NANDF_D8__FEC_TDATA0 0x170 0x558 0x000 0x2 0x0 +#define MX51_PAD_NANDF_D8__GPIO4_0 0x170 0x558 0x000 0x3 0x0 +#define MX51_PAD_NANDF_D8__NANDF_D8 0x170 0x558 0x000 0x0 0x0 +#define MX51_PAD_NANDF_D8__PATA_DATA8 0x170 0x558 0x000 0x1 0x0 +#define MX51_PAD_NANDF_D8__SD3_DATA0 0x170 0x558 0x93c 0x5 0x1 +#define MX51_PAD_NANDF_D7__GPIO4_1 0x174 0x55c 0x000 0x3 0x0 +#define MX51_PAD_NANDF_D7__NANDF_D7 0x174 0x55c 0x000 0x0 0x0 +#define MX51_PAD_NANDF_D7__PATA_DATA7 0x174 0x55c 0x000 0x1 0x0 +#define MX51_PAD_NANDF_D7__USBH3_DATA0 0x174 0x55c 0x9fc 0x5 0x0 +#define MX51_PAD_NANDF_D6__GPIO4_2 0x178 0x560 0x000 0x3 0x0 +#define MX51_PAD_NANDF_D6__NANDF_D6 0x178 0x560 0x000 0x0 0x0 +#define MX51_PAD_NANDF_D6__PATA_DATA6 0x178 0x560 0x000 0x1 0x0 +#define MX51_PAD_NANDF_D6__SD4_LCTL 0x178 0x560 0x000 0x2 0x0 +#define MX51_PAD_NANDF_D6__USBH3_DATA1 0x178 0x560 0xa00 0x5 0x0 +#define MX51_PAD_NANDF_D5__GPIO4_3 0x17c 0x564 0x000 0x3 0x0 +#define MX51_PAD_NANDF_D5__NANDF_D5 0x17c 0x564 0x000 0x0 0x0 +#define MX51_PAD_NANDF_D5__PATA_DATA5 0x17c 0x564 0x000 0x1 0x0 +#define MX51_PAD_NANDF_D5__SD4_WP 0x17c 0x564 0x000 0x2 0x0 +#define MX51_PAD_NANDF_D5__USBH3_DATA2 0x17c 0x564 0xa04 0x5 0x0 +#define MX51_PAD_NANDF_D4__GPIO4_4 0x180 0x568 0x000 0x3 0x0 +#define MX51_PAD_NANDF_D4__NANDF_D4 0x180 0x568 0x000 0x0 0x0 +#define MX51_PAD_NANDF_D4__PATA_DATA4 0x180 0x568 0x000 0x1 0x0 +#define MX51_PAD_NANDF_D4__SD4_CD 0x180 0x568 0x000 0x2 0x0 +#define MX51_PAD_NANDF_D4__USBH3_DATA3 0x180 0x568 0xa08 0x5 0x0 +#define MX51_PAD_NANDF_D3__GPIO4_5 0x184 0x56c 0x000 0x3 0x0 +#define MX51_PAD_NANDF_D3__NANDF_D3 0x184 0x56c 0x000 0x0 0x0 +#define MX51_PAD_NANDF_D3__PATA_DATA3 0x184 0x56c 0x000 0x1 0x0 +#define MX51_PAD_NANDF_D3__SD4_DAT4 0x184 0x56c 0x000 0x2 0x0 +#define MX51_PAD_NANDF_D3__USBH3_DATA4 0x184 0x56c 0xa0c 0x5 0x0 +#define MX51_PAD_NANDF_D2__GPIO4_6 0x188 0x570 0x000 0x3 0x0 +#define MX51_PAD_NANDF_D2__NANDF_D2 0x188 0x570 0x000 0x0 0x0 +#define MX51_PAD_NANDF_D2__PATA_DATA2 0x188 0x570 0x000 0x1 0x0 +#define MX51_PAD_NANDF_D2__SD4_DAT5 0x188 0x570 0x000 0x2 0x0 +#define MX51_PAD_NANDF_D2__USBH3_DATA5 0x188 0x570 0xa10 0x5 0x0 +#define MX51_PAD_NANDF_D1__GPIO4_7 0x18c 0x574 0x000 0x3 0x0 +#define MX51_PAD_NANDF_D1__NANDF_D1 0x18c 0x574 0x000 0x0 0x0 +#define MX51_PAD_NANDF_D1__PATA_DATA1 0x18c 0x574 0x000 0x1 0x0 +#define MX51_PAD_NANDF_D1__SD4_DAT6 0x18c 0x574 0x000 0x2 0x0 +#define MX51_PAD_NANDF_D1__USBH3_DATA6 0x18c 0x574 0xa14 0x5 0x0 +#define MX51_PAD_NANDF_D0__GPIO4_8 0x190 0x578 0x000 0x3 0x0 +#define MX51_PAD_NANDF_D0__NANDF_D0 0x190 0x578 0x000 0x0 0x0 +#define MX51_PAD_NANDF_D0__PATA_DATA0 0x190 0x578 0x000 0x1 0x0 +#define MX51_PAD_NANDF_D0__SD4_DAT7 0x190 0x578 0x000 0x2 0x0 +#define MX51_PAD_NANDF_D0__USBH3_DATA7 0x190 0x578 0xa18 0x5 0x0 +#define MX51_PAD_CSI1_D8__CSI1_D8 0x194 0x57c 0x000 0x0 0x0 +#define MX51_PAD_CSI1_D8__GPIO3_12 0x194 0x57c 0x998 0x3 0x1 +#define MX51_PAD_CSI1_D9__CSI1_D9 0x198 0x580 0x000 0x0 0x0 +#define MX51_PAD_CSI1_D9__GPIO3_13 0x198 0x580 0x000 0x3 0x0 +#define MX51_PAD_CSI1_D10__CSI1_D10 0x19c 0x584 0x000 0x0 0x0 +#define MX51_PAD_CSI1_D11__CSI1_D11 0x1a0 0x588 0x000 0x0 0x0 +#define MX51_PAD_CSI1_D12__CSI1_D12 0x1a4 0x58c 0x000 0x0 0x0 +#define MX51_PAD_CSI1_D13__CSI1_D13 0x1a8 0x590 0x000 0x0 0x0 +#define MX51_PAD_CSI1_D14__CSI1_D14 0x1ac 0x594 0x000 0x0 0x0 +#define MX51_PAD_CSI1_D15__CSI1_D15 0x1b0 0x598 0x000 0x0 0x0 +#define MX51_PAD_CSI1_D16__CSI1_D16 0x1b4 0x59c 0x000 0x0 0x0 +#define MX51_PAD_CSI1_D17__CSI1_D17 0x1b8 0x5a0 0x000 0x0 0x0 +#define MX51_PAD_CSI1_D18__CSI1_D18 0x1bc 0x5a4 0x000 0x0 0x0 +#define MX51_PAD_CSI1_D19__CSI1_D19 0x1c0 0x5a8 0x000 0x0 0x0 +#define MX51_PAD_CSI1_VSYNC__CSI1_VSYNC 0x1c4 0x5ac 0x000 0x0 0x0 +#define MX51_PAD_CSI1_VSYNC__GPIO3_14 0x1c4 0x5ac 0x000 0x3 0x0 +#define MX51_PAD_CSI1_HSYNC__CSI1_HSYNC 0x1c8 0x5b0 0x000 0x0 0x0 +#define MX51_PAD_CSI1_HSYNC__GPIO3_15 0x1c8 0x5b0 0x000 0x3 0x0 +#define MX51_PAD_CSI1_PIXCLK__CSI1_PIXCLK 0x000 0x5b4 0x000 0x0 0x0 +#define MX51_PAD_CSI1_MCLK__CSI1_MCLK 0x000 0x5b8 0x000 0x0 0x0 +#define MX51_PAD_CSI2_D12__CSI2_D12 0x1cc 0x5bc 0x000 0x0 0x0 +#define MX51_PAD_CSI2_D12__GPIO4_9 0x1cc 0x5bc 0x000 0x3 0x0 +#define MX51_PAD_CSI2_D13__CSI2_D13 0x1d0 0x5c0 0x000 0x0 0x0 +#define MX51_PAD_CSI2_D13__GPIO4_10 0x1d0 0x5c0 0x000 0x3 0x0 +#define MX51_PAD_CSI2_D14__CSI2_D14 0x1d4 0x5c4 0x000 0x0 0x0 +#define MX51_PAD_CSI2_D15__CSI2_D15 0x1d8 0x5c8 0x000 0x0 0x0 +#define MX51_PAD_CSI2_D16__CSI2_D16 0x1dc 0x5cc 0x000 0x0 0x0 +#define MX51_PAD_CSI2_D17__CSI2_D17 0x1e0 0x5d0 0x000 0x0 0x0 +#define MX51_PAD_CSI2_D18__CSI2_D18 0x1e4 0x5d4 0x000 0x0 0x0 +#define MX51_PAD_CSI2_D18__GPIO4_11 0x1e4 0x5d4 0x000 0x3 0x0 +#define MX51_PAD_CSI2_D19__CSI2_D19 0x1e8 0x5d8 0x000 0x0 0x0 +#define MX51_PAD_CSI2_D19__GPIO4_12 0x1e8 0x5d8 0x000 0x3 0x0 +#define MX51_PAD_CSI2_VSYNC__CSI2_VSYNC 0x1ec 0x5dc 0x000 0x0 0x0 +#define MX51_PAD_CSI2_VSYNC__GPIO4_13 0x1ec 0x5dc 0x000 0x3 0x0 +#define MX51_PAD_CSI2_HSYNC__CSI2_HSYNC 0x1f0 0x5e0 0x000 0x0 0x0 +#define MX51_PAD_CSI2_HSYNC__GPIO4_14 0x1f0 0x5e0 0x000 0x3 0x0 +#define MX51_PAD_CSI2_PIXCLK__CSI2_PIXCLK 0x1f4 0x5e4 0x000 0x0 0x0 +#define MX51_PAD_CSI2_PIXCLK__GPIO4_15 0x1f4 0x5e4 0x000 0x3 0x0 +#define MX51_PAD_I2C1_CLK__GPIO4_16 0x1f8 0x5e8 0x000 0x3 0x0 +#define MX51_PAD_I2C1_CLK__I2C1_CLK 0x1f8 0x5e8 0x000 0x0 0x0 +#define MX51_PAD_I2C1_DAT__GPIO4_17 0x1fc 0x5ec 0x000 0x3 0x0 +#define MX51_PAD_I2C1_DAT__I2C1_DAT 0x1fc 0x5ec 0x000 0x0 0x0 +#define MX51_PAD_AUD3_BB_TXD__AUD3_TXD 0x200 0x5f0 0x000 0x0 0x0 +#define MX51_PAD_AUD3_BB_TXD__GPIO4_18 0x200 0x5f0 0x000 0x3 0x0 +#define MX51_PAD_AUD3_BB_RXD__AUD3_RXD 0x204 0x5f4 0x000 0x0 0x0 +#define MX51_PAD_AUD3_BB_RXD__GPIO4_19 0x204 0x5f4 0x000 0x3 0x0 +#define MX51_PAD_AUD3_BB_RXD__UART3_RXD 0x204 0x5f4 0x9f4 0x1 0x2 +#define MX51_PAD_AUD3_BB_CK__AUD3_TXC 0x208 0x5f8 0x000 0x0 0x0 +#define MX51_PAD_AUD3_BB_CK__GPIO4_20 0x208 0x5f8 0x000 0x3 0x0 +#define MX51_PAD_AUD3_BB_FS__AUD3_TXFS 0x20c 0x5fc 0x000 0x0 0x0 +#define MX51_PAD_AUD3_BB_FS__GPIO4_21 0x20c 0x5fc 0x000 0x3 0x0 +#define MX51_PAD_AUD3_BB_FS__UART3_TXD 0x20c 0x5fc 0x000 0x1 0x0 +#define MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x210 0x600 0x000 0x0 0x0 +#define MX51_PAD_CSPI1_MOSI__GPIO4_22 0x210 0x600 0x000 0x3 0x0 +#define MX51_PAD_CSPI1_MOSI__I2C1_SDA 0x210 0x600 0x9b4 0x1 0x1 +#define MX51_PAD_CSPI1_MISO__AUD4_RXD 0x214 0x604 0x8c4 0x1 0x1 +#define MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x214 0x604 0x000 0x0 0x0 +#define MX51_PAD_CSPI1_MISO__GPIO4_23 0x214 0x604 0x000 0x3 0x0 +#define MX51_PAD_CSPI1_SS0__AUD4_TXC 0x218 0x608 0x8cc 0x1 0x1 +#define MX51_PAD_CSPI1_SS0__ECSPI1_SS0 0x218 0x608 0x000 0x0 0x0 +#define MX51_PAD_CSPI1_SS0__GPIO4_24 0x218 0x608 0x000 0x3 0x0 +#define MX51_PAD_CSPI1_SS1__AUD4_TXD 0x21c 0x60c 0x8c8 0x1 0x1 +#define MX51_PAD_CSPI1_SS1__ECSPI1_SS1 0x21c 0x60c 0x000 0x0 0x0 +#define MX51_PAD_CSPI1_SS1__GPIO4_25 0x21c 0x60c 0x000 0x3 0x0 +#define MX51_PAD_CSPI1_RDY__AUD4_TXFS 0x220 0x610 0x8d0 0x1 0x1 +#define MX51_PAD_CSPI1_RDY__ECSPI1_RDY 0x220 0x610 0x000 0x0 0x0 +#define MX51_PAD_CSPI1_RDY__GPIO4_26 0x220 0x610 0x000 0x3 0x0 +#define MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x224 0x614 0x000 0x0 0x0 +#define MX51_PAD_CSPI1_SCLK__GPIO4_27 0x224 0x614 0x000 0x3 0x0 +#define MX51_PAD_CSPI1_SCLK__I2C1_SCL 0x224 0x614 0x9b0 0x1 0x1 +#define MX51_PAD_UART1_RXD__GPIO4_28 0x228 0x618 0x000 0x3 0x0 +#define MX51_PAD_UART1_RXD__UART1_RXD 0x228 0x618 0x9e4 0x0 0x0 +#define MX51_PAD_UART1_TXD__GPIO4_29 0x22c 0x61c 0x000 0x3 0x0 +#define MX51_PAD_UART1_TXD__PWM2_PWMO 0x22c 0x61c 0x000 0x1 0x0 +#define MX51_PAD_UART1_TXD__UART1_TXD 0x22c 0x61c 0x000 0x0 0x0 +#define MX51_PAD_UART1_RTS__GPIO4_30 0x230 0x620 0x000 0x3 0x0 +#define MX51_PAD_UART1_RTS__UART1_RTS 0x230 0x620 0x9e0 0x0 0x0 +#define MX51_PAD_UART1_CTS__GPIO4_31 0x234 0x624 0x000 0x3 0x0 +#define MX51_PAD_UART1_CTS__UART1_CTS 0x234 0x624 0x000 0x0 0x0 +#define MX51_PAD_UART2_RXD__FIRI_TXD 0x238 0x628 0x000 0x1 0x0 +#define MX51_PAD_UART2_RXD__GPIO1_20 0x238 0x628 0x000 0x3 0x0 +#define MX51_PAD_UART2_RXD__UART2_RXD 0x238 0x628 0x9ec 0x0 0x2 +#define MX51_PAD_UART2_TXD__FIRI_RXD 0x23c 0x62c 0x000 0x1 0x0 +#define MX51_PAD_UART2_TXD__GPIO1_21 0x23c 0x62c 0x000 0x3 0x0 +#define MX51_PAD_UART2_TXD__UART2_TXD 0x23c 0x62c 0x000 0x0 0x0 +#define MX51_PAD_UART3_RXD__CSI1_D0 0x240 0x630 0x000 0x2 0x0 +#define MX51_PAD_UART3_RXD__GPIO1_22 0x240 0x630 0x000 0x3 0x0 +#define MX51_PAD_UART3_RXD__UART1_DTR 0x240 0x630 0x000 0x0 0x0 +#define MX51_PAD_UART3_RXD__UART3_RXD 0x240 0x630 0x9f4 0x1 0x4 +#define MX51_PAD_UART3_TXD__CSI1_D1 0x244 0x634 0x000 0x2 0x0 +#define MX51_PAD_UART3_TXD__GPIO1_23 0x244 0x634 0x000 0x3 0x0 +#define MX51_PAD_UART3_TXD__UART1_DSR 0x244 0x634 0x000 0x0 0x0 +#define MX51_PAD_UART3_TXD__UART3_TXD 0x244 0x634 0x000 0x1 0x0 +#define MX51_PAD_OWIRE_LINE__GPIO1_24 0x248 0x638 0x000 0x3 0x0 +#define MX51_PAD_OWIRE_LINE__OWIRE_LINE 0x248 0x638 0x000 0x0 0x0 +#define MX51_PAD_OWIRE_LINE__SPDIF_OUT 0x248 0x638 0x000 0x6 0x0 +#define MX51_PAD_KEY_ROW0__KEY_ROW0 0x24c 0x63c 0x000 0x0 0x0 +#define MX51_PAD_KEY_ROW1__KEY_ROW1 0x250 0x640 0x000 0x0 0x0 +#define MX51_PAD_KEY_ROW2__KEY_ROW2 0x254 0x644 0x000 0x0 0x0 +#define MX51_PAD_KEY_ROW3__KEY_ROW3 0x258 0x648 0x000 0x0 0x0 +#define MX51_PAD_KEY_COL0__KEY_COL0 0x25c 0x64c 0x000 0x0 0x0 +#define MX51_PAD_KEY_COL0__PLL1_BYP 0x25c 0x64c 0x90c 0x7 0x0 +#define MX51_PAD_KEY_COL1__KEY_COL1 0x260 0x650 0x000 0x0 0x0 +#define MX51_PAD_KEY_COL1__PLL2_BYP 0x260 0x650 0x910 0x7 0x0 +#define MX51_PAD_KEY_COL2__KEY_COL2 0x264 0x654 0x000 0x0 0x0 +#define MX51_PAD_KEY_COL2__PLL3_BYP 0x264 0x654 0x000 0x7 0x0 +#define MX51_PAD_KEY_COL3__KEY_COL3 0x268 0x658 0x000 0x0 0x0 +#define MX51_PAD_KEY_COL4__I2C2_SCL 0x26c 0x65c 0x9b8 0x3 0x1 +#define MX51_PAD_KEY_COL4__KEY_COL4 0x26c 0x65c 0x000 0x0 0x0 +#define MX51_PAD_KEY_COL4__SPDIF_OUT1 0x26c 0x65c 0x000 0x6 0x0 +#define MX51_PAD_KEY_COL4__UART1_RI 0x26c 0x65c 0x000 0x1 0x0 +#define MX51_PAD_KEY_COL4__UART3_RTS 0x26c 0x65c 0x9f0 0x2 0x4 +#define MX51_PAD_KEY_COL5__I2C2_SDA 0x270 0x660 0x9bc 0x3 0x1 +#define MX51_PAD_KEY_COL5__KEY_COL5 0x270 0x660 0x000 0x0 0x0 +#define MX51_PAD_KEY_COL5__UART1_DCD 0x270 0x660 0x000 0x1 0x0 +#define MX51_PAD_KEY_COL5__UART3_CTS 0x270 0x660 0x000 0x2 0x0 +#define MX51_PAD_USBH1_CLK__CSPI_SCLK 0x278 0x678 0x914 0x1 0x1 +#define MX51_PAD_USBH1_CLK__GPIO1_25 0x278 0x678 0x000 0x2 0x0 +#define MX51_PAD_USBH1_CLK__I2C2_SCL 0x278 0x678 0x9b8 0x5 0x2 +#define MX51_PAD_USBH1_CLK__USBH1_CLK 0x278 0x678 0x000 0x0 0x0 +#define MX51_PAD_USBH1_DIR__CSPI_MOSI 0x27c 0x67c 0x91c 0x1 0x1 +#define MX51_PAD_USBH1_DIR__GPIO1_26 0x27c 0x67c 0x000 0x2 0x0 +#define MX51_PAD_USBH1_DIR__I2C2_SDA 0x27c 0x67c 0x9bc 0x5 0x2 +#define MX51_PAD_USBH1_DIR__USBH1_DIR 0x27c 0x67c 0x000 0x0 0x0 +#define MX51_PAD_USBH1_STP__CSPI_RDY 0x280 0x680 0x000 0x1 0x0 +#define MX51_PAD_USBH1_STP__GPIO1_27 0x280 0x680 0x000 0x2 0x0 +#define MX51_PAD_USBH1_STP__UART3_RXD 0x280 0x680 0x9f4 0x5 0x6 +#define MX51_PAD_USBH1_STP__USBH1_STP 0x280 0x680 0x000 0x0 0x0 +#define MX51_PAD_USBH1_NXT__CSPI_MISO 0x284 0x684 0x918 0x1 0x0 +#define MX51_PAD_USBH1_NXT__GPIO1_28 0x284 0x684 0x000 0x2 0x0 +#define MX51_PAD_USBH1_NXT__UART3_TXD 0x284 0x684 0x000 0x5 0x0 +#define MX51_PAD_USBH1_NXT__USBH1_NXT 0x284 0x684 0x000 0x0 0x0 +#define MX51_PAD_USBH1_DATA0__GPIO1_11 0x288 0x688 0x000 0x2 0x0 +#define MX51_PAD_USBH1_DATA0__UART2_CTS 0x288 0x688 0x000 0x1 0x0 +#define MX51_PAD_USBH1_DATA0__USBH1_DATA0 0x288 0x688 0x000 0x0 0x0 +#define MX51_PAD_USBH1_DATA1__GPIO1_12 0x28c 0x68c 0x000 0x2 0x0 +#define MX51_PAD_USBH1_DATA1__UART2_RXD 0x28c 0x68c 0x9ec 0x1 0x4 +#define MX51_PAD_USBH1_DATA1__USBH1_DATA1 0x28c 0x68c 0x000 0x0 0x0 +#define MX51_PAD_USBH1_DATA2__GPIO1_13 0x290 0x690 0x000 0x2 0x0 +#define MX51_PAD_USBH1_DATA2__UART2_TXD 0x290 0x690 0x000 0x1 0x0 +#define MX51_PAD_USBH1_DATA2__USBH1_DATA2 0x290 0x690 0x000 0x0 0x0 +#define MX51_PAD_USBH1_DATA3__GPIO1_14 0x294 0x694 0x000 0x2 0x0 +#define MX51_PAD_USBH1_DATA3__UART2_RTS 0x294 0x694 0x9e8 0x1 0x5 +#define MX51_PAD_USBH1_DATA3__USBH1_DATA3 0x294 0x694 0x000 0x0 0x0 +#define MX51_PAD_USBH1_DATA4__CSPI_SS0 0x298 0x698 0x000 0x1 0x0 +#define MX51_PAD_USBH1_DATA4__GPIO1_15 0x298 0x698 0x000 0x2 0x0 +#define MX51_PAD_USBH1_DATA4__USBH1_DATA4 0x298 0x698 0x000 0x0 0x0 +#define MX51_PAD_USBH1_DATA5__CSPI_SS1 0x29c 0x69c 0x920 0x1 0x0 +#define MX51_PAD_USBH1_DATA5__GPIO1_16 0x29c 0x69c 0x000 0x2 0x0 +#define MX51_PAD_USBH1_DATA5__USBH1_DATA5 0x29c 0x69c 0x000 0x0 0x0 +#define MX51_PAD_USBH1_DATA6__CSPI_SS3 0x2a0 0x6a0 0x928 0x1 0x1 +#define MX51_PAD_USBH1_DATA6__GPIO1_17 0x2a0 0x6a0 0x000 0x2 0x0 +#define MX51_PAD_USBH1_DATA6__USBH1_DATA6 0x2a0 0x6a0 0x000 0x0 0x0 +#define MX51_PAD_USBH1_DATA7__ECSPI1_SS3 0x2a4 0x6a4 0x000 0x1 0x0 +#define MX51_PAD_USBH1_DATA7__ECSPI2_SS3 0x2a4 0x6a4 0x934 0x5 0x1 +#define MX51_PAD_USBH1_DATA7__GPIO1_18 0x2a4 0x6a4 0x000 0x2 0x0 +#define MX51_PAD_USBH1_DATA7__USBH1_DATA7 0x2a4 0x6a4 0x000 0x0 0x0 +#define MX51_PAD_DI1_PIN11__DI1_PIN11 0x2a8 0x6a8 0x000 0x0 0x0 +#define MX51_PAD_DI1_PIN11__ECSPI1_SS2 0x2a8 0x6a8 0x000 0x7 0x0 +#define MX51_PAD_DI1_PIN11__GPIO3_0 0x2a8 0x6a8 0x000 0x4 0x0 +#define MX51_PAD_DI1_PIN12__DI1_PIN12 0x2ac 0x6ac 0x000 0x0 0x0 +#define MX51_PAD_DI1_PIN12__GPIO3_1 0x2ac 0x6ac 0x978 0x4 0x1 +#define MX51_PAD_DI1_PIN13__DI1_PIN13 0x2b0 0x6b0 0x000 0x0 0x0 +#define MX51_PAD_DI1_PIN13__GPIO3_2 0x2b0 0x6b0 0x97c 0x4 0x1 +#define MX51_PAD_DI1_D0_CS__DI1_D0_CS 0x2b4 0x6b4 0x000 0x0 0x0 +#define MX51_PAD_DI1_D0_CS__GPIO3_3 0x2b4 0x6b4 0x980 0x4 0x1 +#define MX51_PAD_DI1_D1_CS__DI1_D1_CS 0x2b8 0x6b8 0x000 0x0 0x0 +#define MX51_PAD_DI1_D1_CS__DISP1_PIN14 0x2b8 0x6b8 0x000 0x2 0x0 +#define MX51_PAD_DI1_D1_CS__DISP1_PIN5 0x2b8 0x6b8 0x000 0x3 0x0 +#define MX51_PAD_DI1_D1_CS__GPIO3_4 0x2b8 0x6b8 0x984 0x4 0x1 +#define MX51_PAD_DISPB2_SER_DIN__DISP1_PIN1 0x2bc 0x6bc 0x9a4 0x2 0x1 +#define MX51_PAD_DISPB2_SER_DIN__DISPB2_SER_DIN 0x2bc 0x6bc 0x9c4 0x0 0x0 +#define MX51_PAD_DISPB2_SER_DIN__GPIO3_5 0x2bc 0x6bc 0x988 0x4 0x1 +#define MX51_PAD_DISPB2_SER_DIO__DISP1_PIN6 0x2c0 0x6c0 0x000 0x3 0x0 +#define MX51_PAD_DISPB2_SER_DIO__DISPB2_SER_DIO 0x2c0 0x6c0 0x9c4 0x0 0x1 +#define MX51_PAD_DISPB2_SER_DIO__GPIO3_6 0x2c0 0x6c0 0x98c 0x4 0x1 +#define MX51_PAD_DISPB2_SER_CLK__DISP1_PIN17 0x2c4 0x6c4 0x000 0x2 0x0 +#define MX51_PAD_DISPB2_SER_CLK__DISP1_PIN7 0x2c4 0x6c4 0x000 0x3 0x0 +#define MX51_PAD_DISPB2_SER_CLK__DISPB2_SER_CLK 0x2c4 0x6c4 0x000 0x0 0x0 +#define MX51_PAD_DISPB2_SER_CLK__GPIO3_7 0x2c4 0x6c4 0x990 0x4 0x1 +#define MX51_PAD_DISPB2_SER_RS__DISP1_EXT_CLK 0x2c8 0x6c8 0x000 0x2 0x0 +#define MX51_PAD_DISPB2_SER_RS__DISP1_PIN16 0x2c8 0x6c8 0x000 0x2 0x0 +#define MX51_PAD_DISPB2_SER_RS__DISP1_PIN8 0x2c8 0x6c8 0x000 0x3 0x0 +#define MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS 0x2c8 0x6c8 0x000 0x0 0x0 +#define MX51_PAD_DISPB2_SER_RS__GPIO3_8 0x2c8 0x6c8 0x994 0x4 0x1 +#define MX51_PAD_DISP1_DAT0__DISP1_DAT0 0x2cc 0x6cc 0x000 0x0 0x0 +#define MX51_PAD_DISP1_DAT1__DISP1_DAT1 0x2d0 0x6d0 0x000 0x0 0x0 +#define MX51_PAD_DISP1_DAT2__DISP1_DAT2 0x2d4 0x6d4 0x000 0x0 0x0 +#define MX51_PAD_DISP1_DAT3__DISP1_DAT3 0x2d8 0x6d8 0x000 0x0 0x0 +#define MX51_PAD_DISP1_DAT4__DISP1_DAT4 0x2dc 0x6dc 0x000 0x0 0x0 +#define MX51_PAD_DISP1_DAT5__DISP1_DAT5 0x2e0 0x6e0 0x000 0x0 0x0 +#define MX51_PAD_DISP1_DAT6__BOOT_USB_SRC 0x2e4 0x6e4 0x000 0x7 0x0 +#define MX51_PAD_DISP1_DAT6__DISP1_DAT6 0x2e4 0x6e4 0x000 0x0 0x0 +#define MX51_PAD_DISP1_DAT7__BOOT_EEPROM_CFG 0x2e8 0x6e8 0x000 0x7 0x0 +#define MX51_PAD_DISP1_DAT7__DISP1_DAT7 0x2e8 0x6e8 0x000 0x0 0x0 +#define MX51_PAD_DISP1_DAT8__BOOT_SRC0 0x2ec 0x6ec 0x000 0x7 0x0 +#define MX51_PAD_DISP1_DAT8__DISP1_DAT8 0x2ec 0x6ec 0x000 0x0 0x0 +#define MX51_PAD_DISP1_DAT9__BOOT_SRC1 0x2f0 0x6f0 0x000 0x7 0x0 +#define MX51_PAD_DISP1_DAT9__DISP1_DAT9 0x2f0 0x6f0 0x000 0x0 0x0 +#define MX51_PAD_DISP1_DAT10__BOOT_SPARE_SIZE 0x2f4 0x6f4 0x000 0x7 0x0 +#define MX51_PAD_DISP1_DAT10__DISP1_DAT10 0x2f4 0x6f4 0x000 0x0 0x0 +#define MX51_PAD_DISP1_DAT11__BOOT_LPB_FREQ2 0x2f8 0x6f8 0x000 0x7 0x0 +#define MX51_PAD_DISP1_DAT11__DISP1_DAT11 0x2f8 0x6f8 0x000 0x0 0x0 +#define MX51_PAD_DISP1_DAT12__BOOT_MLC_SEL 0x2fc 0x6fc 0x000 0x7 0x0 +#define MX51_PAD_DISP1_DAT12__DISP1_DAT12 0x2fc 0x6fc 0x000 0x0 0x0 +#define MX51_PAD_DISP1_DAT13__BOOT_MEM_CTL0 0x300 0x700 0x000 0x7 0x0 +#define MX51_PAD_DISP1_DAT13__DISP1_DAT13 0x300 0x700 0x000 0x0 0x0 +#define MX51_PAD_DISP1_DAT14__BOOT_MEM_CTL1 0x304 0x704 0x000 0x7 0x0 +#define MX51_PAD_DISP1_DAT14__DISP1_DAT14 0x304 0x704 0x000 0x0 0x0 +#define MX51_PAD_DISP1_DAT15__BOOT_BUS_WIDTH 0x308 0x708 0x000 0x7 0x0 +#define MX51_PAD_DISP1_DAT15__DISP1_DAT15 0x308 0x708 0x000 0x0 0x0 +#define MX51_PAD_DISP1_DAT16__BOOT_PAGE_SIZE0 0x30c 0x70c 0x000 0x7 0x0 +#define MX51_PAD_DISP1_DAT16__DISP1_DAT16 0x30c 0x70c 0x000 0x0 0x0 +#define MX51_PAD_DISP1_DAT17__BOOT_PAGE_SIZE1 0x310 0x710 0x000 0x7 0x0 +#define MX51_PAD_DISP1_DAT17__DISP1_DAT17 0x310 0x710 0x000 0x0 0x0 +#define MX51_PAD_DISP1_DAT18__BOOT_WEIM_MUXED0 0x314 0x714 0x000 0x7 0x0 +#define MX51_PAD_DISP1_DAT18__DISP1_DAT18 0x314 0x714 0x000 0x0 0x0 +#define MX51_PAD_DISP1_DAT18__DISP2_PIN11 0x314 0x714 0x000 0x5 0x0 +#define MX51_PAD_DISP1_DAT18__DISP2_PIN5 0x314 0x714 0x000 0x4 0x0 +#define MX51_PAD_DISP1_DAT19__BOOT_WEIM_MUXED1 0x318 0x718 0x000 0x7 0x0 +#define MX51_PAD_DISP1_DAT19__DISP1_DAT19 0x318 0x718 0x000 0x0 0x0 +#define MX51_PAD_DISP1_DAT19__DISP2_PIN12 0x318 0x718 0x000 0x5 0x0 +#define MX51_PAD_DISP1_DAT19__DISP2_PIN6 0x318 0x718 0x000 0x4 0x0 +#define MX51_PAD_DISP1_DAT20__BOOT_MEM_TYPE0 0x31c 0x71c 0x000 0x7 0x0 +#define MX51_PAD_DISP1_DAT20__DISP1_DAT20 0x31c 0x71c 0x000 0x0 0x0 +#define MX51_PAD_DISP1_DAT20__DISP2_PIN13 0x31c 0x71c 0x000 0x5 0x0 +#define MX51_PAD_DISP1_DAT20__DISP2_PIN7 0x31c 0x71c 0x000 0x4 0x0 +#define MX51_PAD_DISP1_DAT21__BOOT_MEM_TYPE1 0x320 0x720 0x000 0x7 0x0 +#define MX51_PAD_DISP1_DAT21__DISP1_DAT21 0x320 0x720 0x000 0x0 0x0 +#define MX51_PAD_DISP1_DAT21__DISP2_PIN14 0x320 0x720 0x000 0x5 0x0 +#define MX51_PAD_DISP1_DAT21__DISP2_PIN8 0x320 0x720 0x000 0x4 0x0 +#define MX51_PAD_DISP1_DAT22__BOOT_LPB_FREQ0 0x324 0x724 0x000 0x7 0x0 +#define MX51_PAD_DISP1_DAT22__DISP1_DAT22 0x324 0x724 0x000 0x0 0x0 +#define MX51_PAD_DISP1_DAT22__DISP2_D0_CS 0x324 0x724 0x000 0x6 0x0 +#define MX51_PAD_DISP1_DAT22__DISP2_DAT16 0x324 0x724 0x000 0x5 0x0 +#define MX51_PAD_DISP1_DAT23__BOOT_LPB_FREQ1 0x328 0x728 0x000 0x7 0x0 +#define MX51_PAD_DISP1_DAT23__DISP1_DAT23 0x328 0x728 0x000 0x0 0x0 +#define MX51_PAD_DISP1_DAT23__DISP2_D1_CS 0x328 0x728 0x000 0x6 0x0 +#define MX51_PAD_DISP1_DAT23__DISP2_DAT17 0x328 0x728 0x000 0x5 0x0 +#define MX51_PAD_DISP1_DAT23__DISP2_SER_CS 0x328 0x728 0x000 0x4 0x0 +#define MX51_PAD_DI1_PIN3__DI1_PIN3 0x32c 0x72c 0x000 0x0 0x0 +#define MX51_PAD_DI1_PIN2__DI1_PIN2 0x330 0x734 0x000 0x0 0x0 +#define MX51_PAD_DI_GP2__DISP1_SER_CLK 0x338 0x740 0x000 0x0 0x0 +#define MX51_PAD_DI_GP2__DISP2_WAIT 0x338 0x740 0x9a8 0x2 0x1 +#define MX51_PAD_DI_GP3__CSI1_DATA_EN 0x33c 0x744 0x9a0 0x3 0x1 +#define MX51_PAD_DI_GP3__DISP1_SER_DIO 0x33c 0x744 0x9c0 0x0 0x0 +#define MX51_PAD_DI_GP3__FEC_TX_ER 0x33c 0x744 0x000 0x2 0x0 +#define MX51_PAD_DI2_PIN4__CSI2_DATA_EN 0x340 0x748 0x99c 0x3 0x1 +#define MX51_PAD_DI2_PIN4__DI2_PIN4 0x340 0x748 0x000 0x0 0x0 +#define MX51_PAD_DI2_PIN4__FEC_CRS 0x340 0x748 0x950 0x2 0x1 +#define MX51_PAD_DI2_PIN2__DI2_PIN2 0x344 0x74c 0x000 0x0 0x0 +#define MX51_PAD_DI2_PIN2__FEC_MDC 0x344 0x74c 0x000 0x2 0x0 +#define MX51_PAD_DI2_PIN3__DI2_PIN3 0x348 0x750 0x000 0x0 0x0 +#define MX51_PAD_DI2_PIN3__FEC_MDIO 0x348 0x750 0x954 0x2 0x1 +#define MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK 0x34c 0x754 0x000 0x0 0x0 +#define MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 0x34c 0x754 0x95c 0x2 0x1 +#define MX51_PAD_DI_GP4__DI2_PIN15 0x350 0x758 0x000 0x4 0x0 +#define MX51_PAD_DI_GP4__DISP1_SER_DIN 0x350 0x758 0x9c0 0x0 0x1 +#define MX51_PAD_DI_GP4__DISP2_PIN1 0x350 0x758 0x000 0x3 0x0 +#define MX51_PAD_DI_GP4__FEC_RDATA2 0x350 0x758 0x960 0x2 0x1 +#define MX51_PAD_DISP2_DAT0__DISP2_DAT0 0x354 0x75c 0x000 0x0 0x0 +#define MX51_PAD_DISP2_DAT0__FEC_RDATA3 0x354 0x75c 0x964 0x2 0x1 +#define MX51_PAD_DISP2_DAT0__KEY_COL6 0x354 0x75c 0x9c8 0x4 0x1 +#define MX51_PAD_DISP2_DAT0__UART3_RXD 0x354 0x75c 0x9f4 0x5 0x8 +#define MX51_PAD_DISP2_DAT0__USBH3_CLK 0x354 0x75c 0x9f8 0x3 0x1 +#define MX51_PAD_DISP2_DAT1__DISP2_DAT1 0x358 0x760 0x000 0x0 0x0 +#define MX51_PAD_DISP2_DAT1__FEC_RX_ER 0x358 0x760 0x970 0x2 0x1 +#define MX51_PAD_DISP2_DAT1__KEY_COL7 0x358 0x760 0x9cc 0x4 0x1 +#define MX51_PAD_DISP2_DAT1__UART3_TXD 0x358 0x760 0x000 0x5 0x0 +#define MX51_PAD_DISP2_DAT1__USBH3_DIR 0x358 0x760 0xa1c 0x3 0x1 +#define MX51_PAD_DISP2_DAT2__DISP2_DAT2 0x35c 0x764 0x000 0x0 0x0 +#define MX51_PAD_DISP2_DAT3__DISP2_DAT3 0x360 0x768 0x000 0x0 0x0 +#define MX51_PAD_DISP2_DAT4__DISP2_DAT4 0x364 0x76c 0x000 0x0 0x0 +#define MX51_PAD_DISP2_DAT5__DISP2_DAT5 0x368 0x770 0x000 0x0 0x0 +#define MX51_PAD_DISP2_DAT6__DISP2_DAT6 0x36c 0x774 0x000 0x0 0x0 +#define MX51_PAD_DISP2_DAT6__FEC_TDATA1 0x36c 0x774 0x000 0x2 0x0 +#define MX51_PAD_DISP2_DAT6__GPIO1_19 0x36c 0x774 0x000 0x5 0x0 +#define MX51_PAD_DISP2_DAT6__KEY_ROW4 0x36c 0x774 0x9d0 0x4 0x1 +#define MX51_PAD_DISP2_DAT6__USBH3_STP 0x36c 0x774 0xa24 0x3 0x1 +#define MX51_PAD_DISP2_DAT7__DISP2_DAT7 0x370 0x778 0x000 0x0 0x0 +#define MX51_PAD_DISP2_DAT7__FEC_TDATA2 0x370 0x778 0x000 0x2 0x0 +#define MX51_PAD_DISP2_DAT7__GPIO1_29 0x370 0x778 0x000 0x5 0x0 +#define MX51_PAD_DISP2_DAT7__KEY_ROW5 0x370 0x778 0x9d4 0x4 0x1 +#define MX51_PAD_DISP2_DAT7__USBH3_NXT 0x370 0x778 0xa20 0x3 0x1 +#define MX51_PAD_DISP2_DAT8__DISP2_DAT8 0x374 0x77c 0x000 0x0 0x0 +#define MX51_PAD_DISP2_DAT8__FEC_TDATA3 0x374 0x77c 0x000 0x2 0x0 +#define MX51_PAD_DISP2_DAT8__GPIO1_30 0x374 0x77c 0x000 0x5 0x0 +#define MX51_PAD_DISP2_DAT8__KEY_ROW6 0x374 0x77c 0x9d8 0x4 0x1 +#define MX51_PAD_DISP2_DAT8__USBH3_DATA0 0x374 0x77c 0x9fc 0x3 0x1 +#define MX51_PAD_DISP2_DAT9__AUD6_RXC 0x378 0x780 0x8f4 0x4 0x1 +#define MX51_PAD_DISP2_DAT9__DISP2_DAT9 0x378 0x780 0x000 0x0 0x0 +#define MX51_PAD_DISP2_DAT9__FEC_TX_EN 0x378 0x780 0x000 0x2 0x0 +#define MX51_PAD_DISP2_DAT9__GPIO1_31 0x378 0x780 0x000 0x5 0x0 +#define MX51_PAD_DISP2_DAT9__USBH3_DATA1 0x378 0x780 0xa00 0x3 0x1 +#define MX51_PAD_DISP2_DAT10__DISP2_DAT10 0x37c 0x784 0x000 0x0 0x0 +#define MX51_PAD_DISP2_DAT10__DISP2_SER_CS 0x37c 0x784 0x000 0x5 0x0 +#define MX51_PAD_DISP2_DAT10__FEC_COL 0x37c 0x784 0x94c 0x2 0x1 +#define MX51_PAD_DISP2_DAT10__KEY_ROW7 0x37c 0x784 0x9dc 0x4 0x1 +#define MX51_PAD_DISP2_DAT10__USBH3_DATA2 0x37c 0x784 0xa04 0x3 0x1 +#define MX51_PAD_DISP2_DAT11__AUD6_TXD 0x380 0x788 0x8f0 0x4 0x1 +#define MX51_PAD_DISP2_DAT11__DISP2_DAT11 0x380 0x788 0x000 0x0 0x0 +#define MX51_PAD_DISP2_DAT11__FEC_RX_CLK 0x380 0x788 0x968 0x2 0x1 +#define MX51_PAD_DISP2_DAT11__GPIO1_10 0x380 0x788 0x000 0x7 0x0 +#define MX51_PAD_DISP2_DAT11__USBH3_DATA3 0x380 0x788 0xa08 0x3 0x1 +#define MX51_PAD_DISP2_DAT12__AUD6_RXD 0x384 0x78c 0x8ec 0x4 0x1 +#define MX51_PAD_DISP2_DAT12__DISP2_DAT12 0x384 0x78c 0x000 0x0 0x0 +#define MX51_PAD_DISP2_DAT12__FEC_RX_DV 0x384 0x78c 0x96c 0x2 0x1 +#define MX51_PAD_DISP2_DAT12__USBH3_DATA4 0x384 0x78c 0xa0c 0x3 0x1 +#define MX51_PAD_DISP2_DAT13__AUD6_TXC 0x388 0x790 0x8fc 0x4 0x1 +#define MX51_PAD_DISP2_DAT13__DISP2_DAT13 0x388 0x790 0x000 0x0 0x0 +#define MX51_PAD_DISP2_DAT13__FEC_TX_CLK 0x388 0x790 0x974 0x2 0x1 +#define MX51_PAD_DISP2_DAT13__USBH3_DATA5 0x388 0x790 0xa10 0x3 0x1 +#define MX51_PAD_DISP2_DAT14__AUD6_TXFS 0x38c 0x794 0x900 0x4 0x1 +#define MX51_PAD_DISP2_DAT14__DISP2_DAT14 0x38c 0x794 0x000 0x0 0x0 +#define MX51_PAD_DISP2_DAT14__FEC_RDATA0 0x38c 0x794 0x958 0x2 0x1 +#define MX51_PAD_DISP2_DAT14__USBH3_DATA6 0x38c 0x794 0xa14 0x3 0x1 +#define MX51_PAD_DISP2_DAT15__AUD6_RXFS 0x390 0x798 0x8f8 0x4 0x1 +#define MX51_PAD_DISP2_DAT15__DISP1_SER_CS 0x390 0x798 0x000 0x5 0x0 +#define MX51_PAD_DISP2_DAT15__DISP2_DAT15 0x390 0x798 0x000 0x0 0x0 +#define MX51_PAD_DISP2_DAT15__FEC_TDATA0 0x390 0x798 0x000 0x2 0x0 +#define MX51_PAD_DISP2_DAT15__USBH3_DATA7 0x390 0x798 0xa18 0x3 0x1 +#define MX51_PAD_SD1_CMD__AUD5_RXFS 0x394 0x79c 0x8e0 0x1 0x1 +#define MX51_PAD_SD1_CMD__CSPI_MOSI 0x394 0x79c 0x91c 0x2 0x2 +#define MX51_PAD_SD1_CMD__SD1_CMD 0x394 0x79c 0x000 0x0 0x0 +#define MX51_PAD_SD1_CLK__AUD5_RXC 0x398 0x7a0 0x8dc 0x1 0x1 +#define MX51_PAD_SD1_CLK__CSPI_SCLK 0x398 0x7a0 0x914 0x2 0x2 +#define MX51_PAD_SD1_CLK__SD1_CLK 0x398 0x7a0 0x000 0x0 0x0 +#define MX51_PAD_SD1_DATA0__AUD5_TXD 0x39c 0x7a4 0x8d8 0x1 0x2 +#define MX51_PAD_SD1_DATA0__CSPI_MISO 0x39c 0x7a4 0x918 0x2 0x1 +#define MX51_PAD_SD1_DATA0__SD1_DATA0 0x39c 0x7a4 0x000 0x0 0x0 +#define MX51_PAD_EIM_DA0__EIM_DA0 0x01c 0x000 0x000 0x0 0x0 +#define MX51_PAD_EIM_DA1__EIM_DA1 0x020 0x000 0x000 0x0 0x0 +#define MX51_PAD_EIM_DA2__EIM_DA2 0x024 0x000 0x000 0x0 0x0 +#define MX51_PAD_EIM_DA3__EIM_DA3 0x028 0x000 0x000 0x0 0x0 +#define MX51_PAD_SD1_DATA1__AUD5_RXD 0x3a0 0x7a8 0x8d4 0x1 0x2 +#define MX51_PAD_SD1_DATA1__SD1_DATA1 0x3a0 0x7a8 0x000 0x0 0x0 +#define MX51_PAD_EIM_DA4__EIM_DA4 0x02c 0x000 0x000 0x0 0x0 +#define MX51_PAD_EIM_DA5__EIM_DA5 0x030 0x000 0x000 0x0 0x0 +#define MX51_PAD_EIM_DA6__EIM_DA6 0x034 0x000 0x000 0x0 0x0 +#define MX51_PAD_EIM_DA7__EIM_DA7 0x038 0x000 0x000 0x0 0x0 +#define MX51_PAD_SD1_DATA2__AUD5_TXC 0x3a4 0x7ac 0x8e4 0x1 0x2 +#define MX51_PAD_SD1_DATA2__SD1_DATA2 0x3a4 0x7ac 0x000 0x0 0x0 +#define MX51_PAD_EIM_DA10__EIM_DA10 0x044 0x000 0x000 0x0 0x0 +#define MX51_PAD_EIM_DA11__EIM_DA11 0x048 0x000 0x000 0x0 0x0 +#define MX51_PAD_EIM_DA8__EIM_DA8 0x03c 0x000 0x000 0x0 0x0 +#define MX51_PAD_EIM_DA9__EIM_DA9 0x040 0x000 0x000 0x0 0x0 +#define MX51_PAD_SD1_DATA3__AUD5_TXFS 0x3a8 0x7b0 0x8e8 0x1 0x2 +#define MX51_PAD_SD1_DATA3__CSPI_SS1 0x3a8 0x7b0 0x920 0x2 0x1 +#define MX51_PAD_SD1_DATA3__SD1_DATA3 0x3a8 0x7b0 0x000 0x0 0x0 +#define MX51_PAD_GPIO1_0__CSPI_SS2 0x3ac 0x7b4 0x924 0x2 0x0 +#define MX51_PAD_GPIO1_0__GPIO1_0 0x3ac 0x7b4 0x000 0x1 0x0 +#define MX51_PAD_GPIO1_0__SD1_CD 0x3ac 0x7b4 0x000 0x0 0x0 +#define MX51_PAD_GPIO1_1__CSPI_MISO 0x3b0 0x7b8 0x918 0x2 0x2 +#define MX51_PAD_GPIO1_1__GPIO1_1 0x3b0 0x7b8 0x000 0x1 0x0 +#define MX51_PAD_GPIO1_1__SD1_WP 0x3b0 0x7b8 0x000 0x0 0x0 +#define MX51_PAD_EIM_DA12__EIM_DA12 0x04c 0x000 0x000 0x0 0x0 +#define MX51_PAD_EIM_DA13__EIM_DA13 0x050 0x000 0x000 0x0 0x0 +#define MX51_PAD_EIM_DA14__EIM_DA14 0x054 0x000 0x000 0x0 0x0 +#define MX51_PAD_EIM_DA15__EIM_DA15 0x058 0x000 0x000 0x0 0x0 +#define MX51_PAD_SD2_CMD__CSPI_MOSI 0x3b4 0x7bc 0x91c 0x2 0x3 +#define MX51_PAD_SD2_CMD__I2C1_SCL 0x3b4 0x7bc 0x9b0 0x1 0x2 +#define MX51_PAD_SD2_CMD__SD2_CMD 0x3b4 0x7bc 0x000 0x0 0x0 +#define MX51_PAD_SD2_CLK__CSPI_SCLK 0x3b8 0x7c0 0x914 0x2 0x3 +#define MX51_PAD_SD2_CLK__I2C1_SDA 0x3b8 0x7c0 0x9b4 0x1 0x2 +#define MX51_PAD_SD2_CLK__SD2_CLK 0x3b8 0x7c0 0x000 0x0 0x0 +#define MX51_PAD_SD2_DATA0__CSPI_MISO 0x3bc 0x7c4 0x918 0x2 0x3 +#define MX51_PAD_SD2_DATA0__SD1_DAT4 0x3bc 0x7c4 0x000 0x1 0x0 +#define MX51_PAD_SD2_DATA0__SD2_DATA0 0x3bc 0x7c4 0x000 0x0 0x0 +#define MX51_PAD_SD2_DATA1__SD1_DAT5 0x3c0 0x7c8 0x000 0x1 0x0 +#define MX51_PAD_SD2_DATA1__SD2_DATA1 0x3c0 0x7c8 0x000 0x0 0x0 +#define MX51_PAD_SD2_DATA1__USBH3_H2_DP 0x3c0 0x7c8 0x000 0x2 0x0 +#define MX51_PAD_SD2_DATA2__SD1_DAT6 0x3c4 0x7cc 0x000 0x1 0x0 +#define MX51_PAD_SD2_DATA2__SD2_DATA2 0x3c4 0x7cc 0x000 0x0 0x0 +#define MX51_PAD_SD2_DATA2__USBH3_H2_DM 0x3c4 0x7cc 0x000 0x2 0x0 +#define MX51_PAD_SD2_DATA3__CSPI_SS2 0x3c8 0x7d0 0x924 0x2 0x1 +#define MX51_PAD_SD2_DATA3__SD1_DAT7 0x3c8 0x7d0 0x000 0x1 0x0 +#define MX51_PAD_SD2_DATA3__SD2_DATA3 0x3c8 0x7d0 0x000 0x0 0x0 +#define MX51_PAD_GPIO1_2__CCM_OUT_2 0x3cc 0x7d4 0x000 0x5 0x0 +#define MX51_PAD_GPIO1_2__GPIO1_2 0x3cc 0x7d4 0x000 0x0 0x0 +#define MX51_PAD_GPIO1_2__I2C2_SCL 0x3cc 0x7d4 0x9b8 0x2 0x3 +#define MX51_PAD_GPIO1_2__PLL1_BYP 0x3cc 0x7d4 0x90c 0x7 0x1 +#define MX51_PAD_GPIO1_2__PWM1_PWMO 0x3cc 0x7d4 0x000 0x1 0x0 +#define MX51_PAD_GPIO1_3__GPIO1_3 0x3d0 0x7d8 0x000 0x0 0x0 +#define MX51_PAD_GPIO1_3__I2C2_SDA 0x3d0 0x7d8 0x9bc 0x2 0x3 +#define MX51_PAD_GPIO1_3__PLL2_BYP 0x3d0 0x7d8 0x910 0x7 0x1 +#define MX51_PAD_GPIO1_3__PWM2_PWMO 0x3d0 0x7d8 0x000 0x1 0x0 +#define MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ 0x3d4 0x7fc 0x000 0x0 0x0 +#define MX51_PAD_PMIC_INT_REQ__PMIC_PMU_IRQ_B 0x3d4 0x7fc 0x000 0x1 0x0 +#define MX51_PAD_GPIO1_4__DISP2_EXT_CLK 0x3d8 0x804 0x908 0x4 0x1 +#define MX51_PAD_GPIO1_4__EIM_RDY 0x3d8 0x804 0x938 0x3 0x1 +#define MX51_PAD_GPIO1_4__GPIO1_4 0x3d8 0x804 0x000 0x0 0x0 +#define MX51_PAD_GPIO1_4__WDOG1_WDOG_B 0x3d8 0x804 0x000 0x2 0x0 +#define MX51_PAD_GPIO1_5__CSI2_MCLK 0x3dc 0x808 0x000 0x6 0x0 +#define MX51_PAD_GPIO1_5__DISP2_PIN16 0x3dc 0x808 0x000 0x3 0x0 +#define MX51_PAD_GPIO1_5__GPIO1_5 0x3dc 0x808 0x000 0x0 0x0 +#define MX51_PAD_GPIO1_5__WDOG2_WDOG_B 0x3dc 0x808 0x000 0x2 0x0 +#define MX51_PAD_GPIO1_6__DISP2_PIN17 0x3e0 0x80c 0x000 0x4 0x0 +#define MX51_PAD_GPIO1_6__GPIO1_6 0x3e0 0x80c 0x000 0x0 0x0 +#define MX51_PAD_GPIO1_6__REF_EN_B 0x3e0 0x80c 0x000 0x3 0x0 +#define MX51_PAD_GPIO1_7__CCM_OUT_0 0x3e4 0x810 0x000 0x3 0x0 +#define MX51_PAD_GPIO1_7__GPIO1_7 0x3e4 0x810 0x000 0x0 0x0 +#define MX51_PAD_GPIO1_7__SD2_WP 0x3e4 0x810 0x000 0x6 0x0 +#define MX51_PAD_GPIO1_7__SPDIF_OUT1 0x3e4 0x810 0x000 0x2 0x0 +#define MX51_PAD_GPIO1_8__CSI2_DATA_EN 0x3e8 0x814 0x99c 0x2 0x2 +#define MX51_PAD_GPIO1_8__GPIO1_8 0x3e8 0x814 0x000 0x0 0x0 +#define MX51_PAD_GPIO1_8__SD2_CD 0x3e8 0x814 0x000 0x6 0x0 +#define MX51_PAD_GPIO1_8__USBH3_PWR 0x3e8 0x814 0x000 0x1 0x0 +#define MX51_PAD_GPIO1_9__CCM_OUT_1 0x3ec 0x818 0x000 0x3 0x0 +#define MX51_PAD_GPIO1_9__DISP2_D1_CS 0x3ec 0x818 0x000 0x2 0x0 +#define MX51_PAD_GPIO1_9__DISP2_SER_CS 0x3ec 0x818 0x000 0x7 0x0 +#define MX51_PAD_GPIO1_9__GPIO1_9 0x3ec 0x818 0x000 0x0 0x0 +#define MX51_PAD_GPIO1_9__SD2_LCTL 0x3ec 0x818 0x000 0x6 0x0 +#define MX51_PAD_GPIO1_9__USBH3_OC 0x3ec 0x818 0x000 0x1 0x0 + +#endif /* __DTS_IMX51_PINFUNC_H */ diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index fcf035bf7c5a..21bb786c5b31 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -10,7 +10,8 @@ * http://www.gnu.org/copyleft/gpl.html */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" +#include "imx51-pinfunc.h" / { aliases { @@ -55,6 +56,24 @@ }; }; + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a8"; + reg = <0>; + clock-latency = <61036>; /* two CLK32 periods */ + clocks = <&clks 24>; + clock-names = "cpu"; + operating-points = < + /* kHz uV (No regulator support) */ + 160000 0 + 800000 0 + >; + }; + }; + soc { #address-cells = <1>; #size-cells = <1>; @@ -67,6 +86,9 @@ compatible = "fsl,imx51-ipu"; reg = <0x40000000 0x20000000>; interrupts = <11 10>; + clocks = <&clks 59>, <&clks 110>, <&clks 61>; + clock-names = "bus", "di0", "di1"; + resets = <&src 2>; }; aips@70000000 { /* AIPS1 */ @@ -244,6 +266,14 @@ status = "disabled"; }; + gpt: timer@73fa0000 { + compatible = "fsl,imx51-gpt", "fsl,imx31-gpt"; + reg = <0x73fa0000 0x4000>; + interrupts = <39>; + clocks = <&clks 36>, <&clks 41>; + clock-names = "ipg", "per"; + }; + iomuxc: iomuxc@73fa8000 { compatible = "fsl,imx51-iomuxc"; reg = <0x73fa8000 0x4000>; @@ -251,10 +281,10 @@ audmux { pinctrl_audmux_1: audmuxgrp-1 { fsl,pins = < - 384 0x80000000 /* MX51_PAD_AUD3_BB_TXD__AUD3_TXD */ - 386 0x80000000 /* MX51_PAD_AUD3_BB_RXD__AUD3_RXD */ - 389 0x80000000 /* MX51_PAD_AUD3_BB_CK__AUD3_TXC */ - 391 0x80000000 /* MX51_PAD_AUD3_BB_FS__AUD3_TXFS */ + MX51_PAD_AUD3_BB_TXD__AUD3_TXD 0x80000000 + MX51_PAD_AUD3_BB_RXD__AUD3_RXD 0x80000000 + MX51_PAD_AUD3_BB_CK__AUD3_TXC 0x80000000 + MX51_PAD_AUD3_BB_FS__AUD3_TXFS 0x80000000 >; }; }; @@ -262,46 +292,46 @@ fec { pinctrl_fec_1: fecgrp-1 { fsl,pins = < - 128 0x80000000 /* MX51_PAD_EIM_EB2__FEC_MDIO */ - 134 0x80000000 /* MX51_PAD_EIM_EB3__FEC_RDATA1 */ - 146 0x80000000 /* MX51_PAD_EIM_CS2__FEC_RDATA2 */ - 152 0x80000000 /* MX51_PAD_EIM_CS3__FEC_RDATA3 */ - 158 0x80000000 /* MX51_PAD_EIM_CS4__FEC_RX_ER */ - 165 0x80000000 /* MX51_PAD_EIM_CS5__FEC_CRS */ - 206 0x80000000 /* MX51_PAD_NANDF_RB2__FEC_COL */ - 213 0x80000000 /* MX51_PAD_NANDF_RB3__FEC_RX_CLK */ - 293 0x80000000 /* MX51_PAD_NANDF_D9__FEC_RDATA0 */ - 298 0x80000000 /* MX51_PAD_NANDF_D8__FEC_TDATA0 */ - 225 0x80000000 /* MX51_PAD_NANDF_CS2__FEC_TX_ER */ - 231 0x80000000 /* MX51_PAD_NANDF_CS3__FEC_MDC */ - 237 0x80000000 /* MX51_PAD_NANDF_CS4__FEC_TDATA1 */ - 243 0x80000000 /* MX51_PAD_NANDF_CS5__FEC_TDATA2 */ - 250 0x80000000 /* MX51_PAD_NANDF_CS6__FEC_TDATA3 */ - 255 0x80000000 /* MX51_PAD_NANDF_CS7__FEC_TX_EN */ - 260 0x80000000 /* MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK */ + MX51_PAD_EIM_EB2__FEC_MDIO 0x80000000 + MX51_PAD_EIM_EB3__FEC_RDATA1 0x80000000 + MX51_PAD_EIM_CS2__FEC_RDATA2 0x80000000 + MX51_PAD_EIM_CS3__FEC_RDATA3 0x80000000 + MX51_PAD_EIM_CS4__FEC_RX_ER 0x80000000 + MX51_PAD_EIM_CS5__FEC_CRS 0x80000000 + MX51_PAD_NANDF_RB2__FEC_COL 0x80000000 + MX51_PAD_NANDF_RB3__FEC_RX_CLK 0x80000000 + MX51_PAD_NANDF_D9__FEC_RDATA0 0x80000000 + MX51_PAD_NANDF_D8__FEC_TDATA0 0x80000000 + MX51_PAD_NANDF_CS2__FEC_TX_ER 0x80000000 + MX51_PAD_NANDF_CS3__FEC_MDC 0x80000000 + MX51_PAD_NANDF_CS4__FEC_TDATA1 0x80000000 + MX51_PAD_NANDF_CS5__FEC_TDATA2 0x80000000 + MX51_PAD_NANDF_CS6__FEC_TDATA3 0x80000000 + MX51_PAD_NANDF_CS7__FEC_TX_EN 0x80000000 + MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK 0x80000000 >; }; pinctrl_fec_2: fecgrp-2 { fsl,pins = < - 589 0x80000000 /* MX51_PAD_DI_GP3__FEC_TX_ER */ - 592 0x80000000 /* MX51_PAD_DI2_PIN4__FEC_CRS */ - 594 0x80000000 /* MX51_PAD_DI2_PIN2__FEC_MDC */ - 596 0x80000000 /* MX51_PAD_DI2_PIN3__FEC_MDIO */ - 598 0x80000000 /* MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 */ - 602 0x80000000 /* MX51_PAD_DI_GP4__FEC_RDATA2 */ - 604 0x80000000 /* MX51_PAD_DISP2_DAT0__FEC_RDATA3 */ - 609 0x80000000 /* MX51_PAD_DISP2_DAT1__FEC_RX_ER */ - 618 0x80000000 /* MX51_PAD_DISP2_DAT6__FEC_TDATA1 */ - 623 0x80000000 /* MX51_PAD_DISP2_DAT7__FEC_TDATA2 */ - 628 0x80000000 /* MX51_PAD_DISP2_DAT8__FEC_TDATA3 */ - 634 0x80000000 /* MX51_PAD_DISP2_DAT9__FEC_TX_EN */ - 639 0x80000000 /* MX51_PAD_DISP2_DAT10__FEC_COL */ - 644 0x80000000 /* MX51_PAD_DISP2_DAT11__FEC_RX_CLK */ - 649 0x80000000 /* MX51_PAD_DISP2_DAT12__FEC_RX_DV */ - 653 0x80000000 /* MX51_PAD_DISP2_DAT13__FEC_TX_CLK */ - 657 0x80000000 /* MX51_PAD_DISP2_DAT14__FEC_RDATA0 */ - 662 0x80000000 /* MX51_PAD_DISP2_DAT15__FEC_TDATA0 */ + MX51_PAD_DI_GP3__FEC_TX_ER 0x80000000 + MX51_PAD_DI2_PIN4__FEC_CRS 0x80000000 + MX51_PAD_DI2_PIN2__FEC_MDC 0x80000000 + MX51_PAD_DI2_PIN3__FEC_MDIO 0x80000000 + MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 0x80000000 + MX51_PAD_DI_GP4__FEC_RDATA2 0x80000000 + MX51_PAD_DISP2_DAT0__FEC_RDATA3 0x80000000 + MX51_PAD_DISP2_DAT1__FEC_RX_ER 0x80000000 + MX51_PAD_DISP2_DAT6__FEC_TDATA1 0x80000000 + MX51_PAD_DISP2_DAT7__FEC_TDATA2 0x80000000 + MX51_PAD_DISP2_DAT8__FEC_TDATA3 0x80000000 + MX51_PAD_DISP2_DAT9__FEC_TX_EN 0x80000000 + MX51_PAD_DISP2_DAT10__FEC_COL 0x80000000 + MX51_PAD_DISP2_DAT11__FEC_RX_CLK 0x80000000 + MX51_PAD_DISP2_DAT12__FEC_RX_DV 0x80000000 + MX51_PAD_DISP2_DAT13__FEC_TX_CLK 0x80000000 + MX51_PAD_DISP2_DAT14__FEC_RDATA0 0x80000000 + MX51_PAD_DISP2_DAT15__FEC_TDATA0 0x80000000 >; }; }; @@ -309,9 +339,19 @@ ecspi1 { pinctrl_ecspi1_1: ecspi1grp-1 { fsl,pins = < - 398 0x185 /* MX51_PAD_CSPI1_MISO__ECSPI1_MISO */ - 394 0x185 /* MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI */ - 409 0x185 /* MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK */ + MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185 + MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185 + MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185 + >; + }; + }; + + ecspi2 { + pinctrl_ecspi2_1: ecspi2grp-1 { + fsl,pins = < + MX51_PAD_NANDF_RB3__ECSPI2_MISO 0x185 + MX51_PAD_NANDF_D15__ECSPI2_MOSI 0x185 + MX51_PAD_NANDF_RB2__ECSPI2_SCLK 0x185 >; }; }; @@ -319,12 +359,12 @@ esdhc1 { pinctrl_esdhc1_1: esdhc1grp-1 { fsl,pins = < - 666 0x400020d5 /* MX51_PAD_SD1_CMD__SD1_CMD */ - 669 0x20d5 /* MX51_PAD_SD1_CLK__SD1_CLK */ - 672 0x20d5 /* MX51_PAD_SD1_DATA0__SD1_DATA0 */ - 678 0x20d5 /* MX51_PAD_SD1_DATA1__SD1_DATA1 */ - 684 0x20d5 /* MX51_PAD_SD1_DATA2__SD1_DATA2 */ - 691 0x20d5 /* MX51_PAD_SD1_DATA3__SD1_DATA3 */ + MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5 + MX51_PAD_SD1_CLK__SD1_CLK 0x20d5 + MX51_PAD_SD1_DATA0__SD1_DATA0 0x20d5 + MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5 + MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5 + MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5 >; }; }; @@ -332,12 +372,12 @@ esdhc2 { pinctrl_esdhc2_1: esdhc2grp-1 { fsl,pins = < - 704 0x400020d5 /* MX51_PAD_SD2_CMD__SD2_CMD */ - 707 0x20d5 /* MX51_PAD_SD2_CLK__SD2_CLK */ - 710 0x20d5 /* MX51_PAD_SD2_DATA0__SD2_DATA0 */ - 712 0x20d5 /* MX51_PAD_SD2_DATA1__SD2_DATA1 */ - 715 0x20d5 /* MX51_PAD_SD2_DATA2__SD2_DATA2 */ - 719 0x20d5 /* MX51_PAD_SD2_DATA3__SD2_DATA3 */ + MX51_PAD_SD2_CMD__SD2_CMD 0x400020d5 + MX51_PAD_SD2_CLK__SD2_CLK 0x20d5 + MX51_PAD_SD2_DATA0__SD2_DATA0 0x20d5 + MX51_PAD_SD2_DATA1__SD2_DATA1 0x20d5 + MX51_PAD_SD2_DATA2__SD2_DATA2 0x20d5 + MX51_PAD_SD2_DATA3__SD2_DATA3 0x20d5 >; }; }; @@ -345,8 +385,15 @@ i2c2 { pinctrl_i2c2_1: i2c2grp-1 { fsl,pins = < - 449 0x400001ed /* MX51_PAD_KEY_COL4__I2C2_SCL */ - 454 0x400001ed /* MX51_PAD_KEY_COL5__I2C2_SDA */ + MX51_PAD_KEY_COL4__I2C2_SCL 0x400001ed + MX51_PAD_KEY_COL5__I2C2_SDA 0x400001ed + >; + }; + + pinctrl_i2c2_2: i2c2grp-2 { + fsl,pins = < + MX51_PAD_EIM_D27__I2C2_SCL 0x400001ed + MX51_PAD_EIM_D24__I2C2_SDA 0x400001ed >; }; }; @@ -354,32 +401,32 @@ ipu_disp1 { pinctrl_ipu_disp1_1: ipudisp1grp-1 { fsl,pins = < - 528 0x5 /* MX51_PAD_DISP1_DAT0__DISP1_DAT0 */ - 529 0x5 /* MX51_PAD_DISP1_DAT1__DISP1_DAT1 */ - 530 0x5 /* MX51_PAD_DISP1_DAT2__DISP1_DAT2 */ - 531 0x5 /* MX51_PAD_DISP1_DAT3__DISP1_DAT3 */ - 532 0x5 /* MX51_PAD_DISP1_DAT4__DISP1_DAT4 */ - 533 0x5 /* MX51_PAD_DISP1_DAT5__DISP1_DAT5 */ - 535 0x5 /* MX51_PAD_DISP1_DAT6__DISP1_DAT6 */ - 537 0x5 /* MX51_PAD_DISP1_DAT7__DISP1_DAT7 */ - 539 0x5 /* MX51_PAD_DISP1_DAT8__DISP1_DAT8 */ - 541 0x5 /* MX51_PAD_DISP1_DAT9__DISP1_DAT9 */ - 543 0x5 /* MX51_PAD_DISP1_DAT10__DISP1_DAT10 */ - 545 0x5 /* MX51_PAD_DISP1_DAT11__DISP1_DAT11 */ - 547 0x5 /* MX51_PAD_DISP1_DAT12__DISP1_DAT12 */ - 549 0x5 /* MX51_PAD_DISP1_DAT13__DISP1_DAT13 */ - 551 0x5 /* MX51_PAD_DISP1_DAT14__DISP1_DAT14 */ - 553 0x5 /* MX51_PAD_DISP1_DAT15__DISP1_DAT15 */ - 555 0x5 /* MX51_PAD_DISP1_DAT16__DISP1_DAT16 */ - 557 0x5 /* MX51_PAD_DISP1_DAT17__DISP1_DAT17 */ - 559 0x5 /* MX51_PAD_DISP1_DAT18__DISP1_DAT18 */ - 563 0x5 /* MX51_PAD_DISP1_DAT19__DISP1_DAT19 */ - 567 0x5 /* MX51_PAD_DISP1_DAT20__DISP1_DAT20 */ - 571 0x5 /* MX51_PAD_DISP1_DAT21__DISP1_DAT21 */ - 575 0x5 /* MX51_PAD_DISP1_DAT22__DISP1_DAT22 */ - 579 0x5 /* MX51_PAD_DISP1_DAT23__DISP1_DAT23 */ - 584 0x5 /* MX51_PAD_DI1_PIN2__DI1_PIN2 (hsync) */ - 583 0x5 /* MX51_PAD_DI1_PIN3__DI1_PIN3 (vsync) */ + MX51_PAD_DISP1_DAT0__DISP1_DAT0 0x5 + MX51_PAD_DISP1_DAT1__DISP1_DAT1 0x5 + MX51_PAD_DISP1_DAT2__DISP1_DAT2 0x5 + MX51_PAD_DISP1_DAT3__DISP1_DAT3 0x5 + MX51_PAD_DISP1_DAT4__DISP1_DAT4 0x5 + MX51_PAD_DISP1_DAT5__DISP1_DAT5 0x5 + MX51_PAD_DISP1_DAT6__DISP1_DAT6 0x5 + MX51_PAD_DISP1_DAT7__DISP1_DAT7 0x5 + MX51_PAD_DISP1_DAT8__DISP1_DAT8 0x5 + MX51_PAD_DISP1_DAT9__DISP1_DAT9 0x5 + MX51_PAD_DISP1_DAT10__DISP1_DAT10 0x5 + MX51_PAD_DISP1_DAT11__DISP1_DAT11 0x5 + MX51_PAD_DISP1_DAT12__DISP1_DAT12 0x5 + MX51_PAD_DISP1_DAT13__DISP1_DAT13 0x5 + MX51_PAD_DISP1_DAT14__DISP1_DAT14 0x5 + MX51_PAD_DISP1_DAT15__DISP1_DAT15 0x5 + MX51_PAD_DISP1_DAT16__DISP1_DAT16 0x5 + MX51_PAD_DISP1_DAT17__DISP1_DAT17 0x5 + MX51_PAD_DISP1_DAT18__DISP1_DAT18 0x5 + MX51_PAD_DISP1_DAT19__DISP1_DAT19 0x5 + MX51_PAD_DISP1_DAT20__DISP1_DAT20 0x5 + MX51_PAD_DISP1_DAT21__DISP1_DAT21 0x5 + MX51_PAD_DISP1_DAT22__DISP1_DAT22 0x5 + MX51_PAD_DISP1_DAT23__DISP1_DAT23 0x5 + MX51_PAD_DI1_PIN2__DI1_PIN2 0x5 /* hsync */ + MX51_PAD_DI1_PIN3__DI1_PIN3 0x5 /* vsync */ >; }; }; @@ -387,26 +434,62 @@ ipu_disp2 { pinctrl_ipu_disp2_1: ipudisp2grp-1 { fsl,pins = < - 603 0x5 /* MX51_PAD_DISP2_DAT0__DISP2_DAT0 */ - 608 0x5 /* MX51_PAD_DISP2_DAT1__DISP2_DAT1 */ - 613 0x5 /* MX51_PAD_DISP2_DAT2__DISP2_DAT2 */ - 614 0x5 /* MX51_PAD_DISP2_DAT3__DISP2_DAT3 */ - 615 0x5 /* MX51_PAD_DISP2_DAT4__DISP2_DAT4 */ - 616 0x5 /* MX51_PAD_DISP2_DAT5__DISP2_DAT5 */ - 617 0x5 /* MX51_PAD_DISP2_DAT6__DISP2_DAT6 */ - 622 0x5 /* MX51_PAD_DISP2_DAT7__DISP2_DAT7 */ - 627 0x5 /* MX51_PAD_DISP2_DAT8__DISP2_DAT8 */ - 633 0x5 /* MX51_PAD_DISP2_DAT9__DISP2_DAT9 */ - 637 0x5 /* MX51_PAD_DISP2_DAT10__DISP2_DAT10 */ - 643 0x5 /* MX51_PAD_DISP2_DAT11__DISP2_DAT11 */ - 648 0x5 /* MX51_PAD_DISP2_DAT12__DISP2_DAT12 */ - 652 0x5 /* MX51_PAD_DISP2_DAT13__DISP2_DAT13 */ - 656 0x5 /* MX51_PAD_DISP2_DAT14__DISP2_DAT14 */ - 661 0x5 /* MX51_PAD_DISP2_DAT15__DISP2_DAT15 */ - 593 0x5 /* MX51_PAD_DI2_PIN2__DI2_PIN2 (hsync) */ - 595 0x5 /* MX51_PAD_DI2_PIN3__DI2_PIN3 (vsync) */ - 597 0x5 /* MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK */ - 599 0x5 /* MX51_PAD_DI_GP4__DI2_PIN15 */ + MX51_PAD_DISP2_DAT0__DISP2_DAT0 0x5 + MX51_PAD_DISP2_DAT1__DISP2_DAT1 0x5 + MX51_PAD_DISP2_DAT2__DISP2_DAT2 0x5 + MX51_PAD_DISP2_DAT3__DISP2_DAT3 0x5 + MX51_PAD_DISP2_DAT4__DISP2_DAT4 0x5 + MX51_PAD_DISP2_DAT5__DISP2_DAT5 0x5 + MX51_PAD_DISP2_DAT6__DISP2_DAT6 0x5 + MX51_PAD_DISP2_DAT7__DISP2_DAT7 0x5 + MX51_PAD_DISP2_DAT8__DISP2_DAT8 0x5 + MX51_PAD_DISP2_DAT9__DISP2_DAT9 0x5 + MX51_PAD_DISP2_DAT10__DISP2_DAT10 0x5 + MX51_PAD_DISP2_DAT11__DISP2_DAT11 0x5 + MX51_PAD_DISP2_DAT12__DISP2_DAT12 0x5 + MX51_PAD_DISP2_DAT13__DISP2_DAT13 0x5 + MX51_PAD_DISP2_DAT14__DISP2_DAT14 0x5 + MX51_PAD_DISP2_DAT15__DISP2_DAT15 0x5 + MX51_PAD_DI2_PIN2__DI2_PIN2 0x5 /* hsync */ + MX51_PAD_DI2_PIN3__DI2_PIN3 0x5 /* vsync */ + MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK 0x5 + MX51_PAD_DI_GP4__DI2_PIN15 0x5 + >; + }; + }; + + pata { + pinctrl_pata_1: patagrp-1 { + fsl,pins = < + MX51_PAD_NANDF_WE_B__PATA_DIOW 0x2004 + MX51_PAD_NANDF_RE_B__PATA_DIOR 0x2004 + MX51_PAD_NANDF_ALE__PATA_BUFFER_EN 0x2004 + MX51_PAD_NANDF_CLE__PATA_RESET_B 0x2004 + MX51_PAD_NANDF_WP_B__PATA_DMACK 0x2004 + MX51_PAD_NANDF_RB0__PATA_DMARQ 0x2004 + MX51_PAD_NANDF_RB1__PATA_IORDY 0x2004 + MX51_PAD_GPIO_NAND__PATA_INTRQ 0x2004 + MX51_PAD_NANDF_CS2__PATA_CS_0 0x2004 + MX51_PAD_NANDF_CS3__PATA_CS_1 0x2004 + MX51_PAD_NANDF_CS4__PATA_DA_0 0x2004 + MX51_PAD_NANDF_CS5__PATA_DA_1 0x2004 + MX51_PAD_NANDF_CS6__PATA_DA_2 0x2004 + MX51_PAD_NANDF_D15__PATA_DATA15 0x2004 + MX51_PAD_NANDF_D14__PATA_DATA14 0x2004 + MX51_PAD_NANDF_D13__PATA_DATA13 0x2004 + MX51_PAD_NANDF_D12__PATA_DATA12 0x2004 + MX51_PAD_NANDF_D11__PATA_DATA11 0x2004 + MX51_PAD_NANDF_D10__PATA_DATA10 0x2004 + MX51_PAD_NANDF_D9__PATA_DATA9 0x2004 + MX51_PAD_NANDF_D8__PATA_DATA8 0x2004 + MX51_PAD_NANDF_D7__PATA_DATA7 0x2004 + MX51_PAD_NANDF_D6__PATA_DATA6 0x2004 + MX51_PAD_NANDF_D5__PATA_DATA5 0x2004 + MX51_PAD_NANDF_D4__PATA_DATA4 0x2004 + MX51_PAD_NANDF_D3__PATA_DATA3 0x2004 + MX51_PAD_NANDF_D2__PATA_DATA2 0x2004 + MX51_PAD_NANDF_D1__PATA_DATA1 0x2004 + MX51_PAD_NANDF_D0__PATA_DATA0 0x2004 >; }; }; @@ -414,10 +497,10 @@ uart1 { pinctrl_uart1_1: uart1grp-1 { fsl,pins = < - 413 0x1c5 /* MX51_PAD_UART1_RXD__UART1_RXD */ - 416 0x1c5 /* MX51_PAD_UART1_TXD__UART1_TXD */ - 418 0x1c5 /* MX51_PAD_UART1_RTS__UART1_RTS */ - 420 0x1c5 /* MX51_PAD_UART1_CTS__UART1_CTS */ + MX51_PAD_UART1_RXD__UART1_RXD 0x1c5 + MX51_PAD_UART1_TXD__UART1_TXD 0x1c5 + MX51_PAD_UART1_RTS__UART1_RTS 0x1c5 + MX51_PAD_UART1_CTS__UART1_CTS 0x1c5 >; }; }; @@ -425,8 +508,8 @@ uart2 { pinctrl_uart2_1: uart2grp-1 { fsl,pins = < - 423 0x1c5 /* MX51_PAD_UART2_RXD__UART2_RXD */ - 426 0x1c5 /* MX51_PAD_UART2_TXD__UART2_TXD */ + MX51_PAD_UART2_RXD__UART2_RXD 0x1c5 + MX51_PAD_UART2_TXD__UART2_TXD 0x1c5 >; }; }; @@ -434,17 +517,17 @@ uart3 { pinctrl_uart3_1: uart3grp-1 { fsl,pins = < - 54 0x1c5 /* MX51_PAD_EIM_D25__UART3_RXD */ - 59 0x1c5 /* MX51_PAD_EIM_D26__UART3_TXD */ - 65 0x1c5 /* MX51_PAD_EIM_D27__UART3_RTS */ - 49 0x1c5 /* MX51_PAD_EIM_D24__UART3_CTS */ + MX51_PAD_EIM_D25__UART3_RXD 0x1c5 + MX51_PAD_EIM_D26__UART3_TXD 0x1c5 + MX51_PAD_EIM_D27__UART3_RTS 0x1c5 + MX51_PAD_EIM_D24__UART3_CTS 0x1c5 >; }; pinctrl_uart3_2: uart3grp-2 { fsl,pins = < - 434 0x1c5 /* MX51_PAD_UART3_RXD__UART3_RXD */ - 430 0x1c5 /* MX51_PAD_UART3_TXD__UART3_TXD */ + MX51_PAD_UART3_RXD__UART3_RXD 0x1c5 + MX51_PAD_UART3_TXD__UART3_TXD 0x1c5 >; }; }; @@ -452,14 +535,14 @@ kpp { pinctrl_kpp_1: kppgrp-1 { fsl,pins = < - 438 0xe0 /* MX51_PAD_KEY_ROW0__KEY_ROW0 */ - 439 0xe0 /* MX51_PAD_KEY_ROW1__KEY_ROW1 */ - 440 0xe0 /* MX51_PAD_KEY_ROW2__KEY_ROW2 */ - 441 0xe0 /* MX51_PAD_KEY_ROW3__KEY_ROW3 */ - 442 0xe8 /* MX51_PAD_KEY_COL0__KEY_COL0 */ - 444 0xe8 /* MX51_PAD_KEY_COL1__KEY_COL1 */ - 446 0xe8 /* MX51_PAD_KEY_COL2__KEY_COL2 */ - 448 0xe8 /* MX51_PAD_KEY_COL3__KEY_COL3 */ + MX51_PAD_KEY_ROW0__KEY_ROW0 0xe0 + MX51_PAD_KEY_ROW1__KEY_ROW1 0xe0 + MX51_PAD_KEY_ROW2__KEY_ROW2 0xe0 + MX51_PAD_KEY_ROW3__KEY_ROW3 0xe0 + MX51_PAD_KEY_COL0__KEY_COL0 0xe8 + MX51_PAD_KEY_COL1__KEY_COL1 0xe8 + MX51_PAD_KEY_COL2__KEY_COL2 0xe8 + MX51_PAD_KEY_COL3__KEY_COL3 0xe8 >; }; }; @@ -501,6 +584,12 @@ status = "disabled"; }; + src: src@73fd0000 { + compatible = "fsl,imx51-src"; + reg = <0x73fd0000 0x4000>; + #reset-cells = <1>; + }; + clks: ccm@73fd4000{ compatible = "fsl,imx51-ccm"; reg = <0x73fd4000 0x4000>; @@ -591,6 +680,14 @@ status = "disabled"; }; + pata: pata@83fe0000 { + compatible = "fsl,imx51-pata", "fsl,imx27-pata"; + reg = <0x83fe0000 0x4000>; + interrupts = <70>; + clocks = <&clks 161>; + status = "disabled"; + }; + ssi3: ssi@83fe8000 { compatible = "fsl,imx51-ssi", "fsl,imx21-ssi"; reg = <0x83fe8000 0x4000>; diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts index e049fd0319e8..174f86938c89 100644 --- a/arch/arm/boot/dts/imx53-ard.dts +++ b/arch/arm/boot/dts/imx53-ard.dts @@ -11,7 +11,7 @@ */ /dts-v1/; -/include/ "imx53.dtsi" +#include "imx53.dtsi" / { model = "Freescale i.MX53 Automotive Reference Design Board"; @@ -112,40 +112,40 @@ hog { pinctrl_hog: hoggrp { fsl,pins = < - 1077 0x80000000 /* MX53_PAD_GPIO_1__GPIO1_1 */ - 1085 0x80000000 /* MX53_PAD_GPIO_9__GPIO1_9 */ - 486 0x80000000 /* MX53_PAD_EIM_EB3__GPIO2_31 */ - 739 0x80000000 /* MX53_PAD_GPIO_10__GPIO4_0 */ - 218 0x80000000 /* MX53_PAD_DISP0_DAT16__GPIO5_10 */ - 226 0x80000000 /* MX53_PAD_DISP0_DAT17__GPIO5_11 */ - 233 0x80000000 /* MX53_PAD_DISP0_DAT18__GPIO5_12 */ - 241 0x80000000 /* MX53_PAD_DISP0_DAT19__GPIO5_13 */ - 429 0x80000000 /* MX53_PAD_EIM_D16__EMI_WEIM_D_16 */ - 435 0x80000000 /* MX53_PAD_EIM_D17__EMI_WEIM_D_17 */ - 441 0x80000000 /* MX53_PAD_EIM_D18__EMI_WEIM_D_18 */ - 448 0x80000000 /* MX53_PAD_EIM_D19__EMI_WEIM_D_19 */ - 456 0x80000000 /* MX53_PAD_EIM_D20__EMI_WEIM_D_20 */ - 464 0x80000000 /* MX53_PAD_EIM_D21__EMI_WEIM_D_21 */ - 471 0x80000000 /* MX53_PAD_EIM_D22__EMI_WEIM_D_22 */ - 477 0x80000000 /* MX53_PAD_EIM_D23__EMI_WEIM_D_23 */ - 492 0x80000000 /* MX53_PAD_EIM_D24__EMI_WEIM_D_24 */ - 500 0x80000000 /* MX53_PAD_EIM_D25__EMI_WEIM_D_25 */ - 508 0x80000000 /* MX53_PAD_EIM_D26__EMI_WEIM_D_26 */ - 516 0x80000000 /* MX53_PAD_EIM_D27__EMI_WEIM_D_27 */ - 524 0x80000000 /* MX53_PAD_EIM_D28__EMI_WEIM_D_28 */ - 532 0x80000000 /* MX53_PAD_EIM_D29__EMI_WEIM_D_29 */ - 540 0x80000000 /* MX53_PAD_EIM_D30__EMI_WEIM_D_30 */ - 548 0x80000000 /* MX53_PAD_EIM_D31__EMI_WEIM_D_31 */ - 637 0x80000000 /* MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 */ - 642 0x80000000 /* MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 */ - 647 0x80000000 /* MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 */ - 652 0x80000000 /* MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 */ - 657 0x80000000 /* MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 */ - 662 0x80000000 /* MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 */ - 667 0x80000000 /* MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 */ - 611 0x80000000 /* MX53_PAD_EIM_OE__EMI_WEIM_OE */ - 616 0x80000000 /* MX53_PAD_EIM_RW__EMI_WEIM_RW */ - 607 0x80000000 /* MX53_PAD_EIM_CS1__EMI_WEIM_CS_1 */ + MX53_PAD_GPIO_1__GPIO1_1 0x80000000 + MX53_PAD_GPIO_9__GPIO1_9 0x80000000 + MX53_PAD_EIM_EB3__GPIO2_31 0x80000000 + MX53_PAD_GPIO_10__GPIO4_0 0x80000000 + MX53_PAD_DISP0_DAT16__GPIO5_10 0x80000000 + MX53_PAD_DISP0_DAT17__GPIO5_11 0x80000000 + MX53_PAD_DISP0_DAT18__GPIO5_12 0x80000000 + MX53_PAD_DISP0_DAT19__GPIO5_13 0x80000000 + MX53_PAD_EIM_D16__EMI_WEIM_D_16 0x80000000 + MX53_PAD_EIM_D17__EMI_WEIM_D_17 0x80000000 + MX53_PAD_EIM_D18__EMI_WEIM_D_18 0x80000000 + MX53_PAD_EIM_D19__EMI_WEIM_D_19 0x80000000 + MX53_PAD_EIM_D20__EMI_WEIM_D_20 0x80000000 + MX53_PAD_EIM_D21__EMI_WEIM_D_21 0x80000000 + MX53_PAD_EIM_D22__EMI_WEIM_D_22 0x80000000 + MX53_PAD_EIM_D23__EMI_WEIM_D_23 0x80000000 + MX53_PAD_EIM_D24__EMI_WEIM_D_24 0x80000000 + MX53_PAD_EIM_D25__EMI_WEIM_D_25 0x80000000 + MX53_PAD_EIM_D26__EMI_WEIM_D_26 0x80000000 + MX53_PAD_EIM_D27__EMI_WEIM_D_27 0x80000000 + MX53_PAD_EIM_D28__EMI_WEIM_D_28 0x80000000 + MX53_PAD_EIM_D29__EMI_WEIM_D_29 0x80000000 + MX53_PAD_EIM_D30__EMI_WEIM_D_30 0x80000000 + MX53_PAD_EIM_D31__EMI_WEIM_D_31 0x80000000 + MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 0x80000000 + MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 0x80000000 + MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 0x80000000 + MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 0x80000000 + MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 0x80000000 + MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 0x80000000 + MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 0x80000000 + MX53_PAD_EIM_OE__EMI_WEIM_OE 0x80000000 + MX53_PAD_EIM_RW__EMI_WEIM_RW 0x80000000 + MX53_PAD_EIM_CS1__EMI_WEIM_CS_1 0x80000000 >; }; }; diff --git a/arch/arm/boot/dts/imx53-evk.dts b/arch/arm/boot/dts/imx53-evk.dts index 85a89b52f9b8..801fda728ed6 100644 --- a/arch/arm/boot/dts/imx53-evk.dts +++ b/arch/arm/boot/dts/imx53-evk.dts @@ -11,7 +11,7 @@ */ /dts-v1/; -/include/ "imx53.dtsi" +#include "imx53.dtsi" / { model = "Freescale i.MX53 Evaluation Kit"; @@ -82,14 +82,14 @@ hog { pinctrl_hog: hoggrp { fsl,pins = < - 424 0x80000000 /* MX53_PAD_EIM_EB2__GPIO2_30 */ - 449 0x80000000 /* MX53_PAD_EIM_D19__GPIO3_19 */ - 693 0x80000000 /* MX53_PAD_EIM_DA11__GPIO3_11 */ - 697 0x80000000 /* MX53_PAD_EIM_DA12__GPIO3_12 */ - 701 0x80000000 /* MX53_PAD_EIM_DA13__GPIO3_13 */ - 705 0x80000000 /* MX53_PAD_EIM_DA14__GPIO3_14 */ - 868 0x80000000 /* MX53_PAD_PATA_DA_0__GPIO7_6 */ - 873 0x80000000 /* MX53_PAD_PATA_DA_1__GPIO7_7 */ + MX53_PAD_EIM_EB2__GPIO2_30 0x80000000 + MX53_PAD_EIM_D19__GPIO3_19 0x80000000 + MX53_PAD_EIM_DA11__GPIO3_11 0x80000000 + MX53_PAD_EIM_DA12__GPIO3_12 0x80000000 + MX53_PAD_EIM_DA13__GPIO3_13 0x80000000 + MX53_PAD_EIM_DA14__GPIO3_14 0x80000000 + MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000 + MX53_PAD_PATA_DA_1__GPIO7_7 0x80000000 >; }; }; diff --git a/arch/arm/boot/dts/imx53-mba53.dts b/arch/arm/boot/dts/imx53-mba53.dts index 468c0a1d48d9..445a01119cc5 100644 --- a/arch/arm/boot/dts/imx53-mba53.dts +++ b/arch/arm/boot/dts/imx53-mba53.dts @@ -11,7 +11,7 @@ */ /dts-v1/; -/include/ "imx53-tqma53.dtsi" +#include "imx53-tqma53.dtsi" / { model = "TQ MBa53 starter kit"; @@ -21,51 +21,57 @@ &iomuxc { lvds1 { pinctrl_lvds1_1: lvds1-grp1 { - fsl,pins = <730 0x10000 /* LVDS0_TX3 */ - 732 0x10000 /* LVDS0_CLK */ - 734 0x10000 /* LVDS0_TX2 */ - 736 0x10000 /* LVDS0_TX1 */ - 738 0x10000>; /* LVDS0_TX0 */ + fsl,pins = < + MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x10000 + MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 0x10000 + MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 0x10000 + MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 0x10000 + MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 0x10000 + >; }; pinctrl_lvds1_2: lvds1-grp2 { - fsl,pins = <720 0x10000 /* LVDS1_TX3 */ - 722 0x10000 /* LVDS1_TX2 */ - 724 0x10000 /* LVDS1_CLK */ - 726 0x10000 /* LVDS1_TX1 */ - 728 0x10000>; /* LVDS1_TX0 */ + fsl,pins = < + MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 0x10000 + MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 0x10000 + MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK 0x10000 + MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 0x10000 + MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 0x10000 + >; }; }; disp1 { pinctrl_disp1_1: disp1-grp1 { - fsl,pins = <689 0x10000 /* DISP1_DRDY */ - 482 0x10000 /* DISP1_HSYNC */ - 489 0x10000 /* DISP1_VSYNC */ - 515 0x10000 /* DISP1_DAT_22 */ - 523 0x10000 /* DISP1_DAT_23 */ - 545 0x10000 /* DISP1_DAT_21 */ - 553 0x10000 /* DISP1_DAT_20 */ - 558 0x10000 /* DISP1_DAT_19 */ - 564 0x10000 /* DISP1_DAT_18 */ - 570 0x10000 /* DISP1_DAT_17 */ - 575 0x10000 /* DISP1_DAT_16 */ - 580 0x10000 /* DISP1_DAT_15 */ - 585 0x10000 /* DISP1_DAT_14 */ - 590 0x10000 /* DISP1_DAT_13 */ - 595 0x10000 /* DISP1_DAT_12 */ - 628 0x10000 /* DISP1_DAT_11 */ - 634 0x10000 /* DISP1_DAT_10 */ - 639 0x10000 /* DISP1_DAT_9 */ - 644 0x10000 /* DISP1_DAT_8 */ - 649 0x10000 /* DISP1_DAT_7 */ - 654 0x10000 /* DISP1_DAT_6 */ - 659 0x10000 /* DISP1_DAT_5 */ - 664 0x10000 /* DISP1_DAT_4 */ - 669 0x10000 /* DISP1_DAT_3 */ - 674 0x10000 /* DISP1_DAT_2 */ - 679 0x10000 /* DISP1_DAT_1 */ - 684 0x10000>; /* DISP1_DAT_0 */ + fsl,pins = < + MX53_PAD_EIM_DA10__IPU_DI1_PIN15 0x10000 /* DISP1_DRDY */ + MX53_PAD_EIM_D23__IPU_DI1_PIN2 0x10000 /* DISP1_HSYNC */ + MX53_PAD_EIM_EB3__IPU_DI1_PIN3 0x10000 /* DISP1_VSYNC */ + MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 0x10000 + MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 0x10000 + MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 0x10000 + MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 0x10000 + MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 0x10000 + MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 0x10000 + MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 0x10000 + MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 0x10000 + MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 0x10000 + MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 0x10000 + MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 0x10000 + MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 0x10000 + MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 0x10000 + MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 0x10000 + MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9 0x10000 + MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8 0x10000 + MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7 0x10000 + MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6 0x10000 + MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5 0x10000 + MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 0x10000 + MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 0x10000 + MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2 0x10000 + MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1 0x10000 + MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0 0x10000 + >; }; }; }; diff --git a/arch/arm/boot/dts/imx53-pinfunc.h b/arch/arm/boot/dts/imx53-pinfunc.h new file mode 100644 index 000000000000..aec406bc65eb --- /dev/null +++ b/arch/arm/boot/dts/imx53-pinfunc.h @@ -0,0 +1,1189 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __DTS_IMX53_PINFUNC_H +#define __DTS_IMX53_PINFUNC_H + +/* + * The pin function ID is a tuple of + * <mux_reg conf_reg input_reg mux_mode input_val> + */ +#define MX53_PAD_GPIO_19__KPP_COL_5 0x020 0x348 0x840 0x0 0x0 +#define MX53_PAD_GPIO_19__GPIO4_5 0x020 0x348 0x000 0x1 0x0 +#define MX53_PAD_GPIO_19__CCM_CLKO 0x020 0x348 0x000 0x2 0x0 +#define MX53_PAD_GPIO_19__SPDIF_OUT1 0x020 0x348 0x000 0x3 0x0 +#define MX53_PAD_GPIO_19__RTC_CE_RTC_EXT_TRIG2 0x020 0x348 0x000 0x4 0x0 +#define MX53_PAD_GPIO_19__ECSPI1_RDY 0x020 0x348 0x000 0x5 0x0 +#define MX53_PAD_GPIO_19__FEC_TDATA_3 0x020 0x348 0x000 0x6 0x0 +#define MX53_PAD_GPIO_19__SRC_INT_BOOT 0x020 0x348 0x000 0x7 0x0 +#define MX53_PAD_KEY_COL0__KPP_COL_0 0x024 0x34c 0x000 0x0 0x0 +#define MX53_PAD_KEY_COL0__GPIO4_6 0x024 0x34c 0x000 0x1 0x0 +#define MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC 0x024 0x34c 0x758 0x2 0x0 +#define MX53_PAD_KEY_COL0__UART4_TXD_MUX 0x024 0x34c 0x000 0x4 0x0 +#define MX53_PAD_KEY_COL0__ECSPI1_SCLK 0x024 0x34c 0x79c 0x5 0x0 +#define MX53_PAD_KEY_COL0__FEC_RDATA_3 0x024 0x34c 0x000 0x6 0x0 +#define MX53_PAD_KEY_COL0__SRC_ANY_PU_RST 0x024 0x34c 0x000 0x7 0x0 +#define MX53_PAD_KEY_ROW0__KPP_ROW_0 0x028 0x350 0x000 0x0 0x0 +#define MX53_PAD_KEY_ROW0__GPIO4_7 0x028 0x350 0x000 0x1 0x0 +#define MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x028 0x350 0x74c 0x2 0x0 +#define MX53_PAD_KEY_ROW0__UART4_RXD_MUX 0x028 0x350 0x890 0x4 0x1 +#define MX53_PAD_KEY_ROW0__ECSPI1_MOSI 0x028 0x350 0x7a4 0x5 0x0 +#define MX53_PAD_KEY_ROW0__FEC_TX_ER 0x028 0x350 0x000 0x6 0x0 +#define MX53_PAD_KEY_COL1__KPP_COL_1 0x02c 0x354 0x000 0x0 0x0 +#define MX53_PAD_KEY_COL1__GPIO4_8 0x02c 0x354 0x000 0x1 0x0 +#define MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 0x02c 0x354 0x75c 0x2 0x0 +#define MX53_PAD_KEY_COL1__UART5_TXD_MUX 0x02c 0x354 0x000 0x4 0x0 +#define MX53_PAD_KEY_COL1__ECSPI1_MISO 0x02c 0x354 0x7a0 0x5 0x0 +#define MX53_PAD_KEY_COL1__FEC_RX_CLK 0x02c 0x354 0x808 0x6 0x0 +#define MX53_PAD_KEY_COL1__USBPHY1_TXREADY 0x02c 0x354 0x000 0x7 0x0 +#define MX53_PAD_KEY_ROW1__KPP_ROW_1 0x030 0x358 0x000 0x0 0x0 +#define MX53_PAD_KEY_ROW1__GPIO4_9 0x030 0x358 0x000 0x1 0x0 +#define MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD 0x030 0x358 0x748 0x2 0x0 +#define MX53_PAD_KEY_ROW1__UART5_RXD_MUX 0x030 0x358 0x898 0x4 0x1 +#define MX53_PAD_KEY_ROW1__ECSPI1_SS0 0x030 0x358 0x7a8 0x5 0x0 +#define MX53_PAD_KEY_ROW1__FEC_COL 0x030 0x358 0x800 0x6 0x0 +#define MX53_PAD_KEY_ROW1__USBPHY1_RXVALID 0x030 0x358 0x000 0x7 0x0 +#define MX53_PAD_KEY_COL2__KPP_COL_2 0x034 0x35c 0x000 0x0 0x0 +#define MX53_PAD_KEY_COL2__GPIO4_10 0x034 0x35c 0x000 0x1 0x0 +#define MX53_PAD_KEY_COL2__CAN1_TXCAN 0x034 0x35c 0x000 0x2 0x0 +#define MX53_PAD_KEY_COL2__FEC_MDIO 0x034 0x35c 0x804 0x4 0x0 +#define MX53_PAD_KEY_COL2__ECSPI1_SS1 0x034 0x35c 0x7ac 0x5 0x0 +#define MX53_PAD_KEY_COL2__FEC_RDATA_2 0x034 0x35c 0x000 0x6 0x0 +#define MX53_PAD_KEY_COL2__USBPHY1_RXACTIVE 0x034 0x35c 0x000 0x7 0x0 +#define MX53_PAD_KEY_ROW2__KPP_ROW_2 0x038 0x360 0x000 0x0 0x0 +#define MX53_PAD_KEY_ROW2__GPIO4_11 0x038 0x360 0x000 0x1 0x0 +#define MX53_PAD_KEY_ROW2__CAN1_RXCAN 0x038 0x360 0x760 0x2 0x0 +#define MX53_PAD_KEY_ROW2__FEC_MDC 0x038 0x360 0x000 0x4 0x0 +#define MX53_PAD_KEY_ROW2__ECSPI1_SS2 0x038 0x360 0x7b0 0x5 0x0 +#define MX53_PAD_KEY_ROW2__FEC_TDATA_2 0x038 0x360 0x000 0x6 0x0 +#define MX53_PAD_KEY_ROW2__USBPHY1_RXERROR 0x038 0x360 0x000 0x7 0x0 +#define MX53_PAD_KEY_COL3__KPP_COL_3 0x03c 0x364 0x000 0x0 0x0 +#define MX53_PAD_KEY_COL3__GPIO4_12 0x03c 0x364 0x000 0x1 0x0 +#define MX53_PAD_KEY_COL3__USBOH3_H2_DP 0x03c 0x364 0x000 0x2 0x0 +#define MX53_PAD_KEY_COL3__SPDIF_IN1 0x03c 0x364 0x870 0x3 0x0 +#define MX53_PAD_KEY_COL3__I2C2_SCL 0x03c 0x364 0x81c 0x4 0x0 +#define MX53_PAD_KEY_COL3__ECSPI1_SS3 0x03c 0x364 0x7b4 0x5 0x0 +#define MX53_PAD_KEY_COL3__FEC_CRS 0x03c 0x364 0x000 0x6 0x0 +#define MX53_PAD_KEY_COL3__USBPHY1_SIECLOCK 0x03c 0x364 0x000 0x7 0x0 +#define MX53_PAD_KEY_ROW3__KPP_ROW_3 0x040 0x368 0x000 0x0 0x0 +#define MX53_PAD_KEY_ROW3__GPIO4_13 0x040 0x368 0x000 0x1 0x0 +#define MX53_PAD_KEY_ROW3__USBOH3_H2_DM 0x040 0x368 0x000 0x2 0x0 +#define MX53_PAD_KEY_ROW3__CCM_ASRC_EXT_CLK 0x040 0x368 0x768 0x3 0x0 +#define MX53_PAD_KEY_ROW3__I2C2_SDA 0x040 0x368 0x820 0x4 0x0 +#define MX53_PAD_KEY_ROW3__OSC32K_32K_OUT 0x040 0x368 0x000 0x5 0x0 +#define MX53_PAD_KEY_ROW3__CCM_PLL4_BYP 0x040 0x368 0x77c 0x6 0x0 +#define MX53_PAD_KEY_ROW3__USBPHY1_LINESTATE_0 0x040 0x368 0x000 0x7 0x0 +#define MX53_PAD_KEY_COL4__KPP_COL_4 0x044 0x36c 0x000 0x0 0x0 +#define MX53_PAD_KEY_COL4__GPIO4_14 0x044 0x36c 0x000 0x1 0x0 +#define MX53_PAD_KEY_COL4__CAN2_TXCAN 0x044 0x36c 0x000 0x2 0x0 +#define MX53_PAD_KEY_COL4__IPU_SISG_4 0x044 0x36c 0x000 0x3 0x0 +#define MX53_PAD_KEY_COL4__UART5_RTS 0x044 0x36c 0x894 0x4 0x0 +#define MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC 0x044 0x36c 0x89c 0x5 0x0 +#define MX53_PAD_KEY_COL4__USBPHY1_LINESTATE_1 0x044 0x36c 0x000 0x7 0x0 +#define MX53_PAD_KEY_ROW4__KPP_ROW_4 0x048 0x370 0x000 0x0 0x0 +#define MX53_PAD_KEY_ROW4__GPIO4_15 0x048 0x370 0x000 0x1 0x0 +#define MX53_PAD_KEY_ROW4__CAN2_RXCAN 0x048 0x370 0x764 0x2 0x0 +#define MX53_PAD_KEY_ROW4__IPU_SISG_5 0x048 0x370 0x000 0x3 0x0 +#define MX53_PAD_KEY_ROW4__UART5_CTS 0x048 0x370 0x000 0x4 0x0 +#define MX53_PAD_KEY_ROW4__USBOH3_USBOTG_PWR 0x048 0x370 0x000 0x5 0x0 +#define MX53_PAD_KEY_ROW4__USBPHY1_VBUSVALID 0x048 0x370 0x000 0x7 0x0 +#define MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK 0x04c 0x378 0x000 0x0 0x0 +#define MX53_PAD_DI0_DISP_CLK__GPIO4_16 0x04c 0x378 0x000 0x1 0x0 +#define MX53_PAD_DI0_DISP_CLK__USBOH3_USBH2_DIR 0x04c 0x378 0x000 0x2 0x0 +#define MX53_PAD_DI0_DISP_CLK__SDMA_DEBUG_CORE_STATE_0 0x04c 0x378 0x000 0x5 0x0 +#define MX53_PAD_DI0_DISP_CLK__EMI_EMI_DEBUG_0 0x04c 0x378 0x000 0x6 0x0 +#define MX53_PAD_DI0_DISP_CLK__USBPHY1_AVALID 0x04c 0x378 0x000 0x7 0x0 +#define MX53_PAD_DI0_PIN15__IPU_DI0_PIN15 0x050 0x37c 0x000 0x0 0x0 +#define MX53_PAD_DI0_PIN15__GPIO4_17 0x050 0x37c 0x000 0x1 0x0 +#define MX53_PAD_DI0_PIN15__AUDMUX_AUD6_TXC 0x050 0x37c 0x000 0x2 0x0 +#define MX53_PAD_DI0_PIN15__SDMA_DEBUG_CORE_STATE_1 0x050 0x37c 0x000 0x5 0x0 +#define MX53_PAD_DI0_PIN15__EMI_EMI_DEBUG_1 0x050 0x37c 0x000 0x6 0x0 +#define MX53_PAD_DI0_PIN15__USBPHY1_BVALID 0x050 0x37c 0x000 0x7 0x0 +#define MX53_PAD_DI0_PIN2__IPU_DI0_PIN2 0x054 0x380 0x000 0x0 0x0 +#define MX53_PAD_DI0_PIN2__GPIO4_18 0x054 0x380 0x000 0x1 0x0 +#define MX53_PAD_DI0_PIN2__AUDMUX_AUD6_TXD 0x054 0x380 0x000 0x2 0x0 +#define MX53_PAD_DI0_PIN2__SDMA_DEBUG_CORE_STATE_2 0x054 0x380 0x000 0x5 0x0 +#define MX53_PAD_DI0_PIN2__EMI_EMI_DEBUG_2 0x054 0x380 0x000 0x6 0x0 +#define MX53_PAD_DI0_PIN2__USBPHY1_ENDSESSION 0x054 0x380 0x000 0x7 0x0 +#define MX53_PAD_DI0_PIN3__IPU_DI0_PIN3 0x058 0x384 0x000 0x0 0x0 +#define MX53_PAD_DI0_PIN3__GPIO4_19 0x058 0x384 0x000 0x1 0x0 +#define MX53_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS 0x058 0x384 0x000 0x2 0x0 +#define MX53_PAD_DI0_PIN3__SDMA_DEBUG_CORE_STATE_3 0x058 0x384 0x000 0x5 0x0 +#define MX53_PAD_DI0_PIN3__EMI_EMI_DEBUG_3 0x058 0x384 0x000 0x6 0x0 +#define MX53_PAD_DI0_PIN3__USBPHY1_IDDIG 0x058 0x384 0x000 0x7 0x0 +#define MX53_PAD_DI0_PIN4__IPU_DI0_PIN4 0x05c 0x388 0x000 0x0 0x0 +#define MX53_PAD_DI0_PIN4__GPIO4_20 0x05c 0x388 0x000 0x1 0x0 +#define MX53_PAD_DI0_PIN4__AUDMUX_AUD6_RXD 0x05c 0x388 0x000 0x2 0x0 +#define MX53_PAD_DI0_PIN4__ESDHC1_WP 0x05c 0x388 0x7fc 0x3 0x0 +#define MX53_PAD_DI0_PIN4__SDMA_DEBUG_YIELD 0x05c 0x388 0x000 0x5 0x0 +#define MX53_PAD_DI0_PIN4__EMI_EMI_DEBUG_4 0x05c 0x388 0x000 0x6 0x0 +#define MX53_PAD_DI0_PIN4__USBPHY1_HOSTDISCONNECT 0x05c 0x388 0x000 0x7 0x0 +#define MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0 0x060 0x38c 0x000 0x0 0x0 +#define MX53_PAD_DISP0_DAT0__GPIO4_21 0x060 0x38c 0x000 0x1 0x0 +#define MX53_PAD_DISP0_DAT0__CSPI_SCLK 0x060 0x38c 0x780 0x2 0x0 +#define MX53_PAD_DISP0_DAT0__USBOH3_USBH2_DATA_0 0x060 0x38c 0x000 0x3 0x0 +#define MX53_PAD_DISP0_DAT0__SDMA_DEBUG_CORE_RUN 0x060 0x38c 0x000 0x5 0x0 +#define MX53_PAD_DISP0_DAT0__EMI_EMI_DEBUG_5 0x060 0x38c 0x000 0x6 0x0 +#define MX53_PAD_DISP0_DAT0__USBPHY2_TXREADY 0x060 0x38c 0x000 0x7 0x0 +#define MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1 0x064 0x390 0x000 0x0 0x0 +#define MX53_PAD_DISP0_DAT1__GPIO4_22 0x064 0x390 0x000 0x1 0x0 +#define MX53_PAD_DISP0_DAT1__CSPI_MOSI 0x064 0x390 0x788 0x2 0x0 +#define MX53_PAD_DISP0_DAT1__USBOH3_USBH2_DATA_1 0x064 0x390 0x000 0x3 0x0 +#define MX53_PAD_DISP0_DAT1__SDMA_DEBUG_EVENT_CHANNEL_SEL 0x064 0x390 0x000 0x5 0x0 +#define MX53_PAD_DISP0_DAT1__EMI_EMI_DEBUG_6 0x064 0x390 0x000 0x6 0x0 +#define MX53_PAD_DISP0_DAT1__USBPHY2_RXVALID 0x064 0x390 0x000 0x7 0x0 +#define MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2 0x068 0x394 0x000 0x0 0x0 +#define MX53_PAD_DISP0_DAT2__GPIO4_23 0x068 0x394 0x000 0x1 0x0 +#define MX53_PAD_DISP0_DAT2__CSPI_MISO 0x068 0x394 0x784 0x2 0x0 +#define MX53_PAD_DISP0_DAT2__USBOH3_USBH2_DATA_2 0x068 0x394 0x000 0x3 0x0 +#define MX53_PAD_DISP0_DAT2__SDMA_DEBUG_MODE 0x068 0x394 0x000 0x5 0x0 +#define MX53_PAD_DISP0_DAT2__EMI_EMI_DEBUG_7 0x068 0x394 0x000 0x6 0x0 +#define MX53_PAD_DISP0_DAT2__USBPHY2_RXACTIVE 0x068 0x394 0x000 0x7 0x0 +#define MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3 0x06c 0x398 0x000 0x0 0x0 +#define MX53_PAD_DISP0_DAT3__GPIO4_24 0x06c 0x398 0x000 0x1 0x0 +#define MX53_PAD_DISP0_DAT3__CSPI_SS0 0x06c 0x398 0x78c 0x2 0x0 +#define MX53_PAD_DISP0_DAT3__USBOH3_USBH2_DATA_3 0x06c 0x398 0x000 0x3 0x0 +#define MX53_PAD_DISP0_DAT3__SDMA_DEBUG_BUS_ERROR 0x06c 0x398 0x000 0x5 0x0 +#define MX53_PAD_DISP0_DAT3__EMI_EMI_DEBUG_8 0x06c 0x398 0x000 0x6 0x0 +#define MX53_PAD_DISP0_DAT3__USBPHY2_RXERROR 0x06c 0x398 0x000 0x7 0x0 +#define MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4 0x070 0x39c 0x000 0x0 0x0 +#define MX53_PAD_DISP0_DAT4__GPIO4_25 0x070 0x39c 0x000 0x1 0x0 +#define MX53_PAD_DISP0_DAT4__CSPI_SS1 0x070 0x39c 0x790 0x2 0x0 +#define MX53_PAD_DISP0_DAT4__USBOH3_USBH2_DATA_4 0x070 0x39c 0x000 0x3 0x0 +#define MX53_PAD_DISP0_DAT4__SDMA_DEBUG_BUS_RWB 0x070 0x39c 0x000 0x5 0x0 +#define MX53_PAD_DISP0_DAT4__EMI_EMI_DEBUG_9 0x070 0x39c 0x000 0x6 0x0 +#define MX53_PAD_DISP0_DAT4__USBPHY2_SIECLOCK 0x070 0x39c 0x000 0x7 0x0 +#define MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5 0x074 0x3a0 0x000 0x0 0x0 +#define MX53_PAD_DISP0_DAT5__GPIO4_26 0x074 0x3a0 0x000 0x1 0x0 +#define MX53_PAD_DISP0_DAT5__CSPI_SS2 0x074 0x3a0 0x794 0x2 0x0 +#define MX53_PAD_DISP0_DAT5__USBOH3_USBH2_DATA_5 0x074 0x3a0 0x000 0x3 0x0 +#define MX53_PAD_DISP0_DAT5__SDMA_DEBUG_MATCHED_DMBUS 0x074 0x3a0 0x000 0x5 0x0 +#define MX53_PAD_DISP0_DAT5__EMI_EMI_DEBUG_10 0x074 0x3a0 0x000 0x6 0x0 +#define MX53_PAD_DISP0_DAT5__USBPHY2_LINESTATE_0 0x074 0x3a0 0x000 0x7 0x0 +#define MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6 0x078 0x3a4 0x000 0x0 0x0 +#define MX53_PAD_DISP0_DAT6__GPIO4_27 0x078 0x3a4 0x000 0x1 0x0 +#define MX53_PAD_DISP0_DAT6__CSPI_SS3 0x078 0x3a4 0x798 0x2 0x0 +#define MX53_PAD_DISP0_DAT6__USBOH3_USBH2_DATA_6 0x078 0x3a4 0x000 0x3 0x0 +#define MX53_PAD_DISP0_DAT6__SDMA_DEBUG_RTBUFFER_WRITE 0x078 0x3a4 0x000 0x5 0x0 +#define MX53_PAD_DISP0_DAT6__EMI_EMI_DEBUG_11 0x078 0x3a4 0x000 0x6 0x0 +#define MX53_PAD_DISP0_DAT6__USBPHY2_LINESTATE_1 0x078 0x3a4 0x000 0x7 0x0 +#define MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7 0x07c 0x3a8 0x000 0x0 0x0 +#define MX53_PAD_DISP0_DAT7__GPIO4_28 0x07c 0x3a8 0x000 0x1 0x0 +#define MX53_PAD_DISP0_DAT7__CSPI_RDY 0x07c 0x3a8 0x000 0x2 0x0 +#define MX53_PAD_DISP0_DAT7__USBOH3_USBH2_DATA_7 0x07c 0x3a8 0x000 0x3 0x0 +#define MX53_PAD_DISP0_DAT7__SDMA_DEBUG_EVENT_CHANNEL_0 0x07c 0x3a8 0x000 0x5 0x0 +#define MX53_PAD_DISP0_DAT7__EMI_EMI_DEBUG_12 0x07c 0x3a8 0x000 0x6 0x0 +#define MX53_PAD_DISP0_DAT7__USBPHY2_VBUSVALID 0x07c 0x3a8 0x000 0x7 0x0 +#define MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8 0x080 0x3ac 0x000 0x0 0x0 +#define MX53_PAD_DISP0_DAT8__GPIO4_29 0x080 0x3ac 0x000 0x1 0x0 +#define MX53_PAD_DISP0_DAT8__PWM1_PWMO 0x080 0x3ac 0x000 0x2 0x0 +#define MX53_PAD_DISP0_DAT8__WDOG1_WDOG_B 0x080 0x3ac 0x000 0x3 0x0 +#define MX53_PAD_DISP0_DAT8__SDMA_DEBUG_EVENT_CHANNEL_1 0x080 0x3ac 0x000 0x5 0x0 +#define MX53_PAD_DISP0_DAT8__EMI_EMI_DEBUG_13 0x080 0x3ac 0x000 0x6 0x0 +#define MX53_PAD_DISP0_DAT8__USBPHY2_AVALID 0x080 0x3ac 0x000 0x7 0x0 +#define MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9 0x084 0x3b0 0x000 0x0 0x0 +#define MX53_PAD_DISP0_DAT9__GPIO4_30 0x084 0x3b0 0x000 0x1 0x0 +#define MX53_PAD_DISP0_DAT9__PWM2_PWMO 0x084 0x3b0 0x000 0x2 0x0 +#define MX53_PAD_DISP0_DAT9__WDOG2_WDOG_B 0x084 0x3b0 0x000 0x3 0x0 +#define MX53_PAD_DISP0_DAT9__SDMA_DEBUG_EVENT_CHANNEL_2 0x084 0x3b0 0x000 0x5 0x0 +#define MX53_PAD_DISP0_DAT9__EMI_EMI_DEBUG_14 0x084 0x3b0 0x000 0x6 0x0 +#define MX53_PAD_DISP0_DAT9__USBPHY2_VSTATUS_0 0x084 0x3b0 0x000 0x7 0x0 +#define MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10 0x088 0x3b4 0x000 0x0 0x0 +#define MX53_PAD_DISP0_DAT10__GPIO4_31 0x088 0x3b4 0x000 0x1 0x0 +#define MX53_PAD_DISP0_DAT10__USBOH3_USBH2_STP 0x088 0x3b4 0x000 0x2 0x0 +#define MX53_PAD_DISP0_DAT10__SDMA_DEBUG_EVENT_CHANNEL_3 0x088 0x3b4 0x000 0x5 0x0 +#define MX53_PAD_DISP0_DAT10__EMI_EMI_DEBUG_15 0x088 0x3b4 0x000 0x6 0x0 +#define MX53_PAD_DISP0_DAT10__USBPHY2_VSTATUS_1 0x088 0x3b4 0x000 0x7 0x0 +#define MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11 0x08c 0x3b8 0x000 0x0 0x0 +#define MX53_PAD_DISP0_DAT11__GPIO5_5 0x08c 0x3b8 0x000 0x1 0x0 +#define MX53_PAD_DISP0_DAT11__USBOH3_USBH2_NXT 0x08c 0x3b8 0x000 0x2 0x0 +#define MX53_PAD_DISP0_DAT11__SDMA_DEBUG_EVENT_CHANNEL_4 0x08c 0x3b8 0x000 0x5 0x0 +#define MX53_PAD_DISP0_DAT11__EMI_EMI_DEBUG_16 0x08c 0x3b8 0x000 0x6 0x0 +#define MX53_PAD_DISP0_DAT11__USBPHY2_VSTATUS_2 0x08c 0x3b8 0x000 0x7 0x0 +#define MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12 0x090 0x3bc 0x000 0x0 0x0 +#define MX53_PAD_DISP0_DAT12__GPIO5_6 0x090 0x3bc 0x000 0x1 0x0 +#define MX53_PAD_DISP0_DAT12__USBOH3_USBH2_CLK 0x090 0x3bc 0x000 0x2 0x0 +#define MX53_PAD_DISP0_DAT12__SDMA_DEBUG_EVENT_CHANNEL_5 0x090 0x3bc 0x000 0x5 0x0 +#define MX53_PAD_DISP0_DAT12__EMI_EMI_DEBUG_17 0x090 0x3bc 0x000 0x6 0x0 +#define MX53_PAD_DISP0_DAT12__USBPHY2_VSTATUS_3 0x090 0x3bc 0x000 0x7 0x0 +#define MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13 0x094 0x3c0 0x000 0x0 0x0 +#define MX53_PAD_DISP0_DAT13__GPIO5_7 0x094 0x3c0 0x000 0x1 0x0 +#define MX53_PAD_DISP0_DAT13__AUDMUX_AUD5_RXFS 0x094 0x3c0 0x754 0x3 0x0 +#define MX53_PAD_DISP0_DAT13__SDMA_DEBUG_EVT_CHN_LINES_0 0x094 0x3c0 0x000 0x5 0x0 +#define MX53_PAD_DISP0_DAT13__EMI_EMI_DEBUG_18 0x094 0x3c0 0x000 0x6 0x0 +#define MX53_PAD_DISP0_DAT13__USBPHY2_VSTATUS_4 0x094 0x3c0 0x000 0x7 0x0 +#define MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14 0x098 0x3c4 0x000 0x0 0x0 +#define MX53_PAD_DISP0_DAT14__GPIO5_8 0x098 0x3c4 0x000 0x1 0x0 +#define MX53_PAD_DISP0_DAT14__AUDMUX_AUD5_RXC 0x098 0x3c4 0x750 0x3 0x0 +#define MX53_PAD_DISP0_DAT14__SDMA_DEBUG_EVT_CHN_LINES_1 0x098 0x3c4 0x000 0x5 0x0 +#define MX53_PAD_DISP0_DAT14__EMI_EMI_DEBUG_19 0x098 0x3c4 0x000 0x6 0x0 +#define MX53_PAD_DISP0_DAT14__USBPHY2_VSTATUS_5 0x098 0x3c4 0x000 0x7 0x0 +#define MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15 0x09c 0x3c8 0x000 0x0 0x0 +#define MX53_PAD_DISP0_DAT15__GPIO5_9 0x09c 0x3c8 0x000 0x1 0x0 +#define MX53_PAD_DISP0_DAT15__ECSPI1_SS1 0x09c 0x3c8 0x7ac 0x2 0x1 +#define MX53_PAD_DISP0_DAT15__ECSPI2_SS1 0x09c 0x3c8 0x7c8 0x3 0x0 +#define MX53_PAD_DISP0_DAT15__SDMA_DEBUG_EVT_CHN_LINES_2 0x09c 0x3c8 0x000 0x5 0x0 +#define MX53_PAD_DISP0_DAT15__EMI_EMI_DEBUG_20 0x09c 0x3c8 0x000 0x6 0x0 +#define MX53_PAD_DISP0_DAT15__USBPHY2_VSTATUS_6 0x09c 0x3c8 0x000 0x7 0x0 +#define MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16 0x0a0 0x3cc 0x000 0x0 0x0 +#define MX53_PAD_DISP0_DAT16__GPIO5_10 0x0a0 0x3cc 0x000 0x1 0x0 +#define MX53_PAD_DISP0_DAT16__ECSPI2_MOSI 0x0a0 0x3cc 0x7c0 0x2 0x0 +#define MX53_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC 0x0a0 0x3cc 0x758 0x3 0x1 +#define MX53_PAD_DISP0_DAT16__SDMA_EXT_EVENT_0 0x0a0 0x3cc 0x868 0x4 0x0 +#define MX53_PAD_DISP0_DAT16__SDMA_DEBUG_EVT_CHN_LINES_3 0x0a0 0x3cc 0x000 0x5 0x0 +#define MX53_PAD_DISP0_DAT16__EMI_EMI_DEBUG_21 0x0a0 0x3cc 0x000 0x6 0x0 +#define MX53_PAD_DISP0_DAT16__USBPHY2_VSTATUS_7 0x0a0 0x3cc 0x000 0x7 0x0 +#define MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17 0x0a4 0x3d0 0x000 0x0 0x0 +#define MX53_PAD_DISP0_DAT17__GPIO5_11 0x0a4 0x3d0 0x000 0x1 0x0 +#define MX53_PAD_DISP0_DAT17__ECSPI2_MISO 0x0a4 0x3d0 0x7bc 0x2 0x0 +#define MX53_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD 0x0a4 0x3d0 0x74c 0x3 0x1 +#define MX53_PAD_DISP0_DAT17__SDMA_EXT_EVENT_1 0x0a4 0x3d0 0x86c 0x4 0x0 +#define MX53_PAD_DISP0_DAT17__SDMA_DEBUG_EVT_CHN_LINES_4 0x0a4 0x3d0 0x000 0x5 0x0 +#define MX53_PAD_DISP0_DAT17__EMI_EMI_DEBUG_22 0x0a4 0x3d0 0x000 0x6 0x0 +#define MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18 0x0a8 0x3d4 0x000 0x0 0x0 +#define MX53_PAD_DISP0_DAT18__GPIO5_12 0x0a8 0x3d4 0x000 0x1 0x0 +#define MX53_PAD_DISP0_DAT18__ECSPI2_SS0 0x0a8 0x3d4 0x7c4 0x2 0x0 +#define MX53_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS 0x0a8 0x3d4 0x75c 0x3 0x1 +#define MX53_PAD_DISP0_DAT18__AUDMUX_AUD4_RXFS 0x0a8 0x3d4 0x73c 0x4 0x0 +#define MX53_PAD_DISP0_DAT18__SDMA_DEBUG_EVT_CHN_LINES_5 0x0a8 0x3d4 0x000 0x5 0x0 +#define MX53_PAD_DISP0_DAT18__EMI_EMI_DEBUG_23 0x0a8 0x3d4 0x000 0x6 0x0 +#define MX53_PAD_DISP0_DAT18__EMI_WEIM_CS_2 0x0a8 0x3d4 0x000 0x7 0x0 +#define MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19 0x0ac 0x3d8 0x000 0x0 0x0 +#define MX53_PAD_DISP0_DAT19__GPIO5_13 0x0ac 0x3d8 0x000 0x1 0x0 +#define MX53_PAD_DISP0_DAT19__ECSPI2_SCLK 0x0ac 0x3d8 0x7b8 0x2 0x0 +#define MX53_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD 0x0ac 0x3d8 0x748 0x3 0x1 +#define MX53_PAD_DISP0_DAT19__AUDMUX_AUD4_RXC 0x0ac 0x3d8 0x738 0x4 0x0 +#define MX53_PAD_DISP0_DAT19__SDMA_DEBUG_EVT_CHN_LINES_6 0x0ac 0x3d8 0x000 0x5 0x0 +#define MX53_PAD_DISP0_DAT19__EMI_EMI_DEBUG_24 0x0ac 0x3d8 0x000 0x6 0x0 +#define MX53_PAD_DISP0_DAT19__EMI_WEIM_CS_3 0x0ac 0x3d8 0x000 0x7 0x0 +#define MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20 0x0b0 0x3dc 0x000 0x0 0x0 +#define MX53_PAD_DISP0_DAT20__GPIO5_14 0x0b0 0x3dc 0x000 0x1 0x0 +#define MX53_PAD_DISP0_DAT20__ECSPI1_SCLK 0x0b0 0x3dc 0x79c 0x2 0x1 +#define MX53_PAD_DISP0_DAT20__AUDMUX_AUD4_TXC 0x0b0 0x3dc 0x740 0x3 0x0 +#define MX53_PAD_DISP0_DAT20__SDMA_DEBUG_EVT_CHN_LINES_7 0x0b0 0x3dc 0x000 0x5 0x0 +#define MX53_PAD_DISP0_DAT20__EMI_EMI_DEBUG_25 0x0b0 0x3dc 0x000 0x6 0x0 +#define MX53_PAD_DISP0_DAT20__SATA_PHY_TDI 0x0b0 0x3dc 0x000 0x7 0x0 +#define MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21 0x0b4 0x3e0 0x000 0x0 0x0 +#define MX53_PAD_DISP0_DAT21__GPIO5_15 0x0b4 0x3e0 0x000 0x1 0x0 +#define MX53_PAD_DISP0_DAT21__ECSPI1_MOSI 0x0b4 0x3e0 0x7a4 0x2 0x1 +#define MX53_PAD_DISP0_DAT21__AUDMUX_AUD4_TXD 0x0b4 0x3e0 0x734 0x3 0x0 +#define MX53_PAD_DISP0_DAT21__SDMA_DEBUG_BUS_DEVICE_0 0x0b4 0x3e0 0x000 0x5 0x0 +#define MX53_PAD_DISP0_DAT21__EMI_EMI_DEBUG_26 0x0b4 0x3e0 0x000 0x6 0x0 +#define MX53_PAD_DISP0_DAT21__SATA_PHY_TDO 0x0b4 0x3e0 0x000 0x7 0x0 +#define MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22 0x0b8 0x3e4 0x000 0x0 0x0 +#define MX53_PAD_DISP0_DAT22__GPIO5_16 0x0b8 0x3e4 0x000 0x1 0x0 +#define MX53_PAD_DISP0_DAT22__ECSPI1_MISO 0x0b8 0x3e4 0x7a0 0x2 0x1 +#define MX53_PAD_DISP0_DAT22__AUDMUX_AUD4_TXFS 0x0b8 0x3e4 0x744 0x3 0x0 +#define MX53_PAD_DISP0_DAT22__SDMA_DEBUG_BUS_DEVICE_1 0x0b8 0x3e4 0x000 0x5 0x0 +#define MX53_PAD_DISP0_DAT22__EMI_EMI_DEBUG_27 0x0b8 0x3e4 0x000 0x6 0x0 +#define MX53_PAD_DISP0_DAT22__SATA_PHY_TCK 0x0b8 0x3e4 0x000 0x7 0x0 +#define MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23 0x0bc 0x3e8 0x000 0x0 0x0 +#define MX53_PAD_DISP0_DAT23__GPIO5_17 0x0bc 0x3e8 0x000 0x1 0x0 +#define MX53_PAD_DISP0_DAT23__ECSPI1_SS0 0x0bc 0x3e8 0x7a8 0x2 0x1 +#define MX53_PAD_DISP0_DAT23__AUDMUX_AUD4_RXD 0x0bc 0x3e8 0x730 0x3 0x0 +#define MX53_PAD_DISP0_DAT23__SDMA_DEBUG_BUS_DEVICE_2 0x0bc 0x3e8 0x000 0x5 0x0 +#define MX53_PAD_DISP0_DAT23__EMI_EMI_DEBUG_28 0x0bc 0x3e8 0x000 0x6 0x0 +#define MX53_PAD_DISP0_DAT23__SATA_PHY_TMS 0x0bc 0x3e8 0x000 0x7 0x0 +#define MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK 0x0c0 0x3ec 0x000 0x0 0x0 +#define MX53_PAD_CSI0_PIXCLK__GPIO5_18 0x0c0 0x3ec 0x000 0x1 0x0 +#define MX53_PAD_CSI0_PIXCLK__SDMA_DEBUG_PC_0 0x0c0 0x3ec 0x000 0x5 0x0 +#define MX53_PAD_CSI0_PIXCLK__EMI_EMI_DEBUG_29 0x0c0 0x3ec 0x000 0x6 0x0 +#define MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC 0x0c4 0x3f0 0x000 0x0 0x0 +#define MX53_PAD_CSI0_MCLK__GPIO5_19 0x0c4 0x3f0 0x000 0x1 0x0 +#define MX53_PAD_CSI0_MCLK__CCM_CSI0_MCLK 0x0c4 0x3f0 0x000 0x2 0x0 +#define MX53_PAD_CSI0_MCLK__SDMA_DEBUG_PC_1 0x0c4 0x3f0 0x000 0x5 0x0 +#define MX53_PAD_CSI0_MCLK__EMI_EMI_DEBUG_30 0x0c4 0x3f0 0x000 0x6 0x0 +#define MX53_PAD_CSI0_MCLK__TPIU_TRCTL 0x0c4 0x3f0 0x000 0x7 0x0 +#define MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN 0x0c8 0x3f4 0x000 0x0 0x0 +#define MX53_PAD_CSI0_DATA_EN__GPIO5_20 0x0c8 0x3f4 0x000 0x1 0x0 +#define MX53_PAD_CSI0_DATA_EN__SDMA_DEBUG_PC_2 0x0c8 0x3f4 0x000 0x5 0x0 +#define MX53_PAD_CSI0_DATA_EN__EMI_EMI_DEBUG_31 0x0c8 0x3f4 0x000 0x6 0x0 +#define MX53_PAD_CSI0_DATA_EN__TPIU_TRCLK 0x0c8 0x3f4 0x000 0x7 0x0 +#define MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC 0x0cc 0x3f8 0x000 0x0 0x0 +#define MX53_PAD_CSI0_VSYNC__GPIO5_21 0x0cc 0x3f8 0x000 0x1 0x0 +#define MX53_PAD_CSI0_VSYNC__SDMA_DEBUG_PC_3 0x0cc 0x3f8 0x000 0x5 0x0 +#define MX53_PAD_CSI0_VSYNC__EMI_EMI_DEBUG_32 0x0cc 0x3f8 0x000 0x6 0x0 +#define MX53_PAD_CSI0_VSYNC__TPIU_TRACE_0 0x0cc 0x3f8 0x000 0x7 0x0 +#define MX53_PAD_CSI0_DAT4__IPU_CSI0_D_4 0x0d0 0x3fc 0x000 0x0 0x0 +#define MX53_PAD_CSI0_DAT4__GPIO5_22 0x0d0 0x3fc 0x000 0x1 0x0 +#define MX53_PAD_CSI0_DAT4__KPP_COL_5 0x0d0 0x3fc 0x840 0x2 0x1 +#define MX53_PAD_CSI0_DAT4__ECSPI1_SCLK 0x0d0 0x3fc 0x79c 0x3 0x2 +#define MX53_PAD_CSI0_DAT4__USBOH3_USBH3_STP 0x0d0 0x3fc 0x000 0x4 0x0 +#define MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC 0x0d0 0x3fc 0x000 0x5 0x0 +#define MX53_PAD_CSI0_DAT4__EMI_EMI_DEBUG_33 0x0d0 0x3fc 0x000 0x6 0x0 +#define MX53_PAD_CSI0_DAT4__TPIU_TRACE_1 0x0d0 0x3fc 0x000 0x7 0x0 +#define MX53_PAD_CSI0_DAT5__IPU_CSI0_D_5 0x0d4 0x400 0x000 0x0 0x0 +#define MX53_PAD_CSI0_DAT5__GPIO5_23 0x0d4 0x400 0x000 0x1 0x0 +#define MX53_PAD_CSI0_DAT5__KPP_ROW_5 0x0d4 0x400 0x84c 0x2 0x0 +#define MX53_PAD_CSI0_DAT5__ECSPI1_MOSI 0x0d4 0x400 0x7a4 0x3 0x2 +#define MX53_PAD_CSI0_DAT5__USBOH3_USBH3_NXT 0x0d4 0x400 0x000 0x4 0x0 +#define MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD 0x0d4 0x400 0x000 0x5 0x0 +#define MX53_PAD_CSI0_DAT5__EMI_EMI_DEBUG_34 0x0d4 0x400 0x000 0x6 0x0 +#define MX53_PAD_CSI0_DAT5__TPIU_TRACE_2 0x0d4 0x400 0x000 0x7 0x0 +#define MX53_PAD_CSI0_DAT6__IPU_CSI0_D_6 0x0d8 0x404 0x000 0x0 0x0 +#define MX53_PAD_CSI0_DAT6__GPIO5_24 0x0d8 0x404 0x000 0x1 0x0 +#define MX53_PAD_CSI0_DAT6__KPP_COL_6 0x0d8 0x404 0x844 0x2 0x0 +#define MX53_PAD_CSI0_DAT6__ECSPI1_MISO 0x0d8 0x404 0x7a0 0x3 0x2 +#define MX53_PAD_CSI0_DAT6__USBOH3_USBH3_CLK 0x0d8 0x404 0x000 0x4 0x0 +#define MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS 0x0d8 0x404 0x000 0x5 0x0 +#define MX53_PAD_CSI0_DAT6__EMI_EMI_DEBUG_35 0x0d8 0x404 0x000 0x6 0x0 +#define MX53_PAD_CSI0_DAT6__TPIU_TRACE_3 0x0d8 0x404 0x000 0x7 0x0 +#define MX53_PAD_CSI0_DAT7__IPU_CSI0_D_7 0x0dc 0x408 0x000 0x0 0x0 +#define MX53_PAD_CSI0_DAT7__GPIO5_25 0x0dc 0x408 0x000 0x1 0x0 +#define MX53_PAD_CSI0_DAT7__KPP_ROW_6 0x0dc 0x408 0x850 0x2 0x0 +#define MX53_PAD_CSI0_DAT7__ECSPI1_SS0 0x0dc 0x408 0x7a8 0x3 0x2 +#define MX53_PAD_CSI0_DAT7__USBOH3_USBH3_DIR 0x0dc 0x408 0x000 0x4 0x0 +#define MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD 0x0dc 0x408 0x000 0x5 0x0 +#define MX53_PAD_CSI0_DAT7__EMI_EMI_DEBUG_36 0x0dc 0x408 0x000 0x6 0x0 +#define MX53_PAD_CSI0_DAT7__TPIU_TRACE_4 0x0dc 0x408 0x000 0x7 0x0 +#define MX53_PAD_CSI0_DAT8__IPU_CSI0_D_8 0x0e0 0x40c 0x000 0x0 0x0 +#define MX53_PAD_CSI0_DAT8__GPIO5_26 0x0e0 0x40c 0x000 0x1 0x0 +#define MX53_PAD_CSI0_DAT8__KPP_COL_7 0x0e0 0x40c 0x848 0x2 0x0 +#define MX53_PAD_CSI0_DAT8__ECSPI2_SCLK 0x0e0 0x40c 0x7b8 0x3 0x1 +#define MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC 0x0e0 0x40c 0x000 0x4 0x0 +#define MX53_PAD_CSI0_DAT8__I2C1_SDA 0x0e0 0x40c 0x818 0x5 0x0 +#define MX53_PAD_CSI0_DAT8__EMI_EMI_DEBUG_37 0x0e0 0x40c 0x000 0x6 0x0 +#define MX53_PAD_CSI0_DAT8__TPIU_TRACE_5 0x0e0 0x40c 0x000 0x7 0x0 +#define MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9 0x0e4 0x410 0x000 0x0 0x0 +#define MX53_PAD_CSI0_DAT9__GPIO5_27 0x0e4 0x410 0x000 0x1 0x0 +#define MX53_PAD_CSI0_DAT9__KPP_ROW_7 0x0e4 0x410 0x854 0x2 0x0 +#define MX53_PAD_CSI0_DAT9__ECSPI2_MOSI 0x0e4 0x410 0x7c0 0x3 0x1 +#define MX53_PAD_CSI0_DAT9__USBOH3_USBH3_PWR 0x0e4 0x410 0x000 0x4 0x0 +#define MX53_PAD_CSI0_DAT9__I2C1_SCL 0x0e4 0x410 0x814 0x5 0x0 +#define MX53_PAD_CSI0_DAT9__EMI_EMI_DEBUG_38 0x0e4 0x410 0x000 0x6 0x0 +#define MX53_PAD_CSI0_DAT9__TPIU_TRACE_6 0x0e4 0x410 0x000 0x7 0x0 +#define MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10 0x0e8 0x414 0x000 0x0 0x0 +#define MX53_PAD_CSI0_DAT10__GPIO5_28 0x0e8 0x414 0x000 0x1 0x0 +#define MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 0x0e8 0x414 0x000 0x2 0x0 +#define MX53_PAD_CSI0_DAT10__ECSPI2_MISO 0x0e8 0x414 0x7bc 0x3 0x1 +#define MX53_PAD_CSI0_DAT10__AUDMUX_AUD3_RXC 0x0e8 0x414 0x000 0x4 0x0 +#define MX53_PAD_CSI0_DAT10__SDMA_DEBUG_PC_4 0x0e8 0x414 0x000 0x5 0x0 +#define MX53_PAD_CSI0_DAT10__EMI_EMI_DEBUG_39 0x0e8 0x414 0x000 0x6 0x0 +#define MX53_PAD_CSI0_DAT10__TPIU_TRACE_7 0x0e8 0x414 0x000 0x7 0x0 +#define MX53_PAD_CSI0_DAT11__IPU_CSI0_D_11 0x0ec 0x418 0x000 0x0 0x0 +#define MX53_PAD_CSI0_DAT11__GPIO5_29 0x0ec 0x418 0x000 0x1 0x0 +#define MX53_PAD_CSI0_DAT11__UART1_RXD_MUX 0x0ec 0x418 0x878 0x2 0x1 +#define MX53_PAD_CSI0_DAT11__ECSPI2_SS0 0x0ec 0x418 0x7c4 0x3 0x1 +#define MX53_PAD_CSI0_DAT11__AUDMUX_AUD3_RXFS 0x0ec 0x418 0x000 0x4 0x0 +#define MX53_PAD_CSI0_DAT11__SDMA_DEBUG_PC_5 0x0ec 0x418 0x000 0x5 0x0 +#define MX53_PAD_CSI0_DAT11__EMI_EMI_DEBUG_40 0x0ec 0x418 0x000 0x6 0x0 +#define MX53_PAD_CSI0_DAT11__TPIU_TRACE_8 0x0ec 0x418 0x000 0x7 0x0 +#define MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12 0x0f0 0x41c 0x000 0x0 0x0 +#define MX53_PAD_CSI0_DAT12__GPIO5_30 0x0f0 0x41c 0x000 0x1 0x0 +#define MX53_PAD_CSI0_DAT12__UART4_TXD_MUX 0x0f0 0x41c 0x000 0x2 0x0 +#define MX53_PAD_CSI0_DAT12__USBOH3_USBH3_DATA_0 0x0f0 0x41c 0x000 0x4 0x0 +#define MX53_PAD_CSI0_DAT12__SDMA_DEBUG_PC_6 0x0f0 0x41c 0x000 0x5 0x0 +#define MX53_PAD_CSI0_DAT12__EMI_EMI_DEBUG_41 0x0f0 0x41c 0x000 0x6 0x0 +#define MX53_PAD_CSI0_DAT12__TPIU_TRACE_9 0x0f0 0x41c 0x000 0x7 0x0 +#define MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13 0x0f4 0x420 0x000 0x0 0x0 +#define MX53_PAD_CSI0_DAT13__GPIO5_31 0x0f4 0x420 0x000 0x1 0x0 +#define MX53_PAD_CSI0_DAT13__UART4_RXD_MUX 0x0f4 0x420 0x890 0x2 0x3 +#define MX53_PAD_CSI0_DAT13__USBOH3_USBH3_DATA_1 0x0f4 0x420 0x000 0x4 0x0 +#define MX53_PAD_CSI0_DAT13__SDMA_DEBUG_PC_7 0x0f4 0x420 0x000 0x5 0x0 +#define MX53_PAD_CSI0_DAT13__EMI_EMI_DEBUG_42 0x0f4 0x420 0x000 0x6 0x0 +#define MX53_PAD_CSI0_DAT13__TPIU_TRACE_10 0x0f4 0x420 0x000 0x7 0x0 +#define MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14 0x0f8 0x424 0x000 0x0 0x0 +#define MX53_PAD_CSI0_DAT14__GPIO6_0 0x0f8 0x424 0x000 0x1 0x0 +#define MX53_PAD_CSI0_DAT14__UART5_TXD_MUX 0x0f8 0x424 0x000 0x2 0x0 +#define MX53_PAD_CSI0_DAT14__USBOH3_USBH3_DATA_2 0x0f8 0x424 0x000 0x4 0x0 +#define MX53_PAD_CSI0_DAT14__SDMA_DEBUG_PC_8 0x0f8 0x424 0x000 0x5 0x0 +#define MX53_PAD_CSI0_DAT14__EMI_EMI_DEBUG_43 0x0f8 0x424 0x000 0x6 0x0 +#define MX53_PAD_CSI0_DAT14__TPIU_TRACE_11 0x0f8 0x424 0x000 0x7 0x0 +#define MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15 0x0fc 0x428 0x000 0x0 0x0 +#define MX53_PAD_CSI0_DAT15__GPIO6_1 0x0fc 0x428 0x000 0x1 0x0 +#define MX53_PAD_CSI0_DAT15__UART5_RXD_MUX 0x0fc 0x428 0x898 0x2 0x3 +#define MX53_PAD_CSI0_DAT15__USBOH3_USBH3_DATA_3 0x0fc 0x428 0x000 0x4 0x0 +#define MX53_PAD_CSI0_DAT15__SDMA_DEBUG_PC_9 0x0fc 0x428 0x000 0x5 0x0 +#define MX53_PAD_CSI0_DAT15__EMI_EMI_DEBUG_44 0x0fc 0x428 0x000 0x6 0x0 +#define MX53_PAD_CSI0_DAT15__TPIU_TRACE_12 0x0fc 0x428 0x000 0x7 0x0 +#define MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16 0x100 0x42c 0x000 0x0 0x0 +#define MX53_PAD_CSI0_DAT16__GPIO6_2 0x100 0x42c 0x000 0x1 0x0 +#define MX53_PAD_CSI0_DAT16__UART4_RTS 0x100 0x42c 0x88c 0x2 0x0 +#define MX53_PAD_CSI0_DAT16__USBOH3_USBH3_DATA_4 0x100 0x42c 0x000 0x4 0x0 +#define MX53_PAD_CSI0_DAT16__SDMA_DEBUG_PC_10 0x100 0x42c 0x000 0x5 0x0 +#define MX53_PAD_CSI0_DAT16__EMI_EMI_DEBUG_45 0x100 0x42c 0x000 0x6 0x0 +#define MX53_PAD_CSI0_DAT16__TPIU_TRACE_13 0x100 0x42c 0x000 0x7 0x0 +#define MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17 0x104 0x430 0x000 0x0 0x0 +#define MX53_PAD_CSI0_DAT17__GPIO6_3 0x104 0x430 0x000 0x1 0x0 +#define MX53_PAD_CSI0_DAT17__UART4_CTS 0x104 0x430 0x000 0x2 0x0 +#define MX53_PAD_CSI0_DAT17__USBOH3_USBH3_DATA_5 0x104 0x430 0x000 0x4 0x0 +#define MX53_PAD_CSI0_DAT17__SDMA_DEBUG_PC_11 0x104 0x430 0x000 0x5 0x0 +#define MX53_PAD_CSI0_DAT17__EMI_EMI_DEBUG_46 0x104 0x430 0x000 0x6 0x0 +#define MX53_PAD_CSI0_DAT17__TPIU_TRACE_14 0x104 0x430 0x000 0x7 0x0 +#define MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18 0x108 0x434 0x000 0x0 0x0 +#define MX53_PAD_CSI0_DAT18__GPIO6_4 0x108 0x434 0x000 0x1 0x0 +#define MX53_PAD_CSI0_DAT18__UART5_RTS 0x108 0x434 0x894 0x2 0x2 +#define MX53_PAD_CSI0_DAT18__USBOH3_USBH3_DATA_6 0x108 0x434 0x000 0x4 0x0 +#define MX53_PAD_CSI0_DAT18__SDMA_DEBUG_PC_12 0x108 0x434 0x000 0x5 0x0 +#define MX53_PAD_CSI0_DAT18__EMI_EMI_DEBUG_47 0x108 0x434 0x000 0x6 0x0 +#define MX53_PAD_CSI0_DAT18__TPIU_TRACE_15 0x108 0x434 0x000 0x7 0x0 +#define MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19 0x10c 0x438 0x000 0x0 0x0 +#define MX53_PAD_CSI0_DAT19__GPIO6_5 0x10c 0x438 0x000 0x1 0x0 +#define MX53_PAD_CSI0_DAT19__UART5_CTS 0x10c 0x438 0x000 0x2 0x0 +#define MX53_PAD_CSI0_DAT19__USBOH3_USBH3_DATA_7 0x10c 0x438 0x000 0x4 0x0 +#define MX53_PAD_CSI0_DAT19__SDMA_DEBUG_PC_13 0x10c 0x438 0x000 0x5 0x0 +#define MX53_PAD_CSI0_DAT19__EMI_EMI_DEBUG_48 0x10c 0x438 0x000 0x6 0x0 +#define MX53_PAD_CSI0_DAT19__USBPHY2_BISTOK 0x10c 0x438 0x000 0x7 0x0 +#define MX53_PAD_EIM_A25__EMI_WEIM_A_25 0x110 0x458 0x000 0x0 0x0 +#define MX53_PAD_EIM_A25__GPIO5_2 0x110 0x458 0x000 0x1 0x0 +#define MX53_PAD_EIM_A25__ECSPI2_RDY 0x110 0x458 0x000 0x2 0x0 +#define MX53_PAD_EIM_A25__IPU_DI1_PIN12 0x110 0x458 0x000 0x3 0x0 +#define MX53_PAD_EIM_A25__CSPI_SS1 0x110 0x458 0x790 0x4 0x1 +#define MX53_PAD_EIM_A25__IPU_DI0_D1_CS 0x110 0x458 0x000 0x6 0x0 +#define MX53_PAD_EIM_A25__USBPHY1_BISTOK 0x110 0x458 0x000 0x7 0x0 +#define MX53_PAD_EIM_EB2__EMI_WEIM_EB_2 0x114 0x45c 0x000 0x0 0x0 +#define MX53_PAD_EIM_EB2__GPIO2_30 0x114 0x45c 0x000 0x1 0x0 +#define MX53_PAD_EIM_EB2__CCM_DI1_EXT_CLK 0x114 0x45c 0x76c 0x2 0x0 +#define MX53_PAD_EIM_EB2__IPU_SER_DISP1_CS 0x114 0x45c 0x000 0x3 0x0 +#define MX53_PAD_EIM_EB2__ECSPI1_SS0 0x114 0x45c 0x7a8 0x4 0x3 +#define MX53_PAD_EIM_EB2__I2C2_SCL 0x114 0x45c 0x81c 0x5 0x1 +#define MX53_PAD_EIM_D16__EMI_WEIM_D_16 0x118 0x460 0x000 0x0 0x0 +#define MX53_PAD_EIM_D16__GPIO3_16 0x118 0x460 0x000 0x1 0x0 +#define MX53_PAD_EIM_D16__IPU_DI0_PIN5 0x118 0x460 0x000 0x2 0x0 +#define MX53_PAD_EIM_D16__IPU_DISPB1_SER_CLK 0x118 0x460 0x000 0x3 0x0 +#define MX53_PAD_EIM_D16__ECSPI1_SCLK 0x118 0x460 0x79c 0x4 0x3 +#define MX53_PAD_EIM_D16__I2C2_SDA 0x118 0x460 0x820 0x5 0x1 +#define MX53_PAD_EIM_D17__EMI_WEIM_D_17 0x11c 0x464 0x000 0x0 0x0 +#define MX53_PAD_EIM_D17__GPIO3_17 0x11c 0x464 0x000 0x1 0x0 +#define MX53_PAD_EIM_D17__IPU_DI0_PIN6 0x11c 0x464 0x000 0x2 0x0 +#define MX53_PAD_EIM_D17__IPU_DISPB1_SER_DIN 0x11c 0x464 0x830 0x3 0x0 +#define MX53_PAD_EIM_D17__ECSPI1_MISO 0x11c 0x464 0x7a0 0x4 0x3 +#define MX53_PAD_EIM_D17__I2C3_SCL 0x11c 0x464 0x824 0x5 0x0 +#define MX53_PAD_EIM_D18__EMI_WEIM_D_18 0x120 0x468 0x000 0x0 0x0 +#define MX53_PAD_EIM_D18__GPIO3_18 0x120 0x468 0x000 0x1 0x0 +#define MX53_PAD_EIM_D18__IPU_DI0_PIN7 0x120 0x468 0x000 0x2 0x0 +#define MX53_PAD_EIM_D18__IPU_DISPB1_SER_DIO 0x120 0x468 0x830 0x3 0x1 +#define MX53_PAD_EIM_D18__ECSPI1_MOSI 0x120 0x468 0x7a4 0x4 0x3 +#define MX53_PAD_EIM_D18__I2C3_SDA 0x120 0x468 0x828 0x5 0x0 +#define MX53_PAD_EIM_D18__IPU_DI1_D0_CS 0x120 0x468 0x000 0x6 0x0 +#define MX53_PAD_EIM_D19__EMI_WEIM_D_19 0x124 0x46c 0x000 0x0 0x0 +#define MX53_PAD_EIM_D19__GPIO3_19 0x124 0x46c 0x000 0x1 0x0 +#define MX53_PAD_EIM_D19__IPU_DI0_PIN8 0x124 0x46c 0x000 0x2 0x0 +#define MX53_PAD_EIM_D19__IPU_DISPB1_SER_RS 0x124 0x46c 0x000 0x3 0x0 +#define MX53_PAD_EIM_D19__ECSPI1_SS1 0x124 0x46c 0x7ac 0x4 0x2 +#define MX53_PAD_EIM_D19__EPIT1_EPITO 0x124 0x46c 0x000 0x5 0x0 +#define MX53_PAD_EIM_D19__UART1_CTS 0x124 0x46c 0x000 0x6 0x0 +#define MX53_PAD_EIM_D19__USBOH3_USBH2_OC 0x124 0x46c 0x8a4 0x7 0x0 +#define MX53_PAD_EIM_D20__EMI_WEIM_D_20 0x128 0x470 0x000 0x0 0x0 +#define MX53_PAD_EIM_D20__GPIO3_20 0x128 0x470 0x000 0x1 0x0 +#define MX53_PAD_EIM_D20__IPU_DI0_PIN16 0x128 0x470 0x000 0x2 0x0 +#define MX53_PAD_EIM_D20__IPU_SER_DISP0_CS 0x128 0x470 0x000 0x3 0x0 +#define MX53_PAD_EIM_D20__CSPI_SS0 0x128 0x470 0x78c 0x4 0x1 +#define MX53_PAD_EIM_D20__EPIT2_EPITO 0x128 0x470 0x000 0x5 0x0 +#define MX53_PAD_EIM_D20__UART1_RTS 0x128 0x470 0x874 0x6 0x1 +#define MX53_PAD_EIM_D20__USBOH3_USBH2_PWR 0x128 0x470 0x000 0x7 0x0 +#define MX53_PAD_EIM_D21__EMI_WEIM_D_21 0x12c 0x474 0x000 0x0 0x0 +#define MX53_PAD_EIM_D21__GPIO3_21 0x12c 0x474 0x000 0x1 0x0 +#define MX53_PAD_EIM_D21__IPU_DI0_PIN17 0x12c 0x474 0x000 0x2 0x0 +#define MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK 0x12c 0x474 0x000 0x3 0x0 +#define MX53_PAD_EIM_D21__CSPI_SCLK 0x12c 0x474 0x780 0x4 0x1 +#define MX53_PAD_EIM_D21__I2C1_SCL 0x12c 0x474 0x814 0x5 0x1 +#define MX53_PAD_EIM_D21__USBOH3_USBOTG_OC 0x12c 0x474 0x89c 0x6 0x1 +#define MX53_PAD_EIM_D22__EMI_WEIM_D_22 0x130 0x478 0x000 0x0 0x0 +#define MX53_PAD_EIM_D22__GPIO3_22 0x130 0x478 0x000 0x1 0x0 +#define MX53_PAD_EIM_D22__IPU_DI0_PIN1 0x130 0x478 0x000 0x2 0x0 +#define MX53_PAD_EIM_D22__IPU_DISPB0_SER_DIN 0x130 0x478 0x82c 0x3 0x0 +#define MX53_PAD_EIM_D22__CSPI_MISO 0x130 0x478 0x784 0x4 0x1 +#define MX53_PAD_EIM_D22__USBOH3_USBOTG_PWR 0x130 0x478 0x000 0x6 0x0 +#define MX53_PAD_EIM_D23__EMI_WEIM_D_23 0x134 0x47c 0x000 0x0 0x0 +#define MX53_PAD_EIM_D23__GPIO3_23 0x134 0x47c 0x000 0x1 0x0 +#define MX53_PAD_EIM_D23__UART3_CTS 0x134 0x47c 0x000 0x2 0x0 +#define MX53_PAD_EIM_D23__UART1_DCD 0x134 0x47c 0x000 0x3 0x0 +#define MX53_PAD_EIM_D23__IPU_DI0_D0_CS 0x134 0x47c 0x000 0x4 0x0 +#define MX53_PAD_EIM_D23__IPU_DI1_PIN2 0x134 0x47c 0x000 0x5 0x0 +#define MX53_PAD_EIM_D23__IPU_CSI1_DATA_EN 0x134 0x47c 0x834 0x6 0x0 +#define MX53_PAD_EIM_D23__IPU_DI1_PIN14 0x134 0x47c 0x000 0x7 0x0 +#define MX53_PAD_EIM_EB3__EMI_WEIM_EB_3 0x138 0x480 0x000 0x0 0x0 +#define MX53_PAD_EIM_EB3__GPIO2_31 0x138 0x480 0x000 0x1 0x0 +#define MX53_PAD_EIM_EB3__UART3_RTS 0x138 0x480 0x884 0x2 0x1 +#define MX53_PAD_EIM_EB3__UART1_RI 0x138 0x480 0x000 0x3 0x0 +#define MX53_PAD_EIM_EB3__IPU_DI1_PIN3 0x138 0x480 0x000 0x5 0x0 +#define MX53_PAD_EIM_EB3__IPU_CSI1_HSYNC 0x138 0x480 0x838 0x6 0x0 +#define MX53_PAD_EIM_EB3__IPU_DI1_PIN16 0x138 0x480 0x000 0x7 0x0 +#define MX53_PAD_EIM_D24__EMI_WEIM_D_24 0x13c 0x484 0x000 0x0 0x0 +#define MX53_PAD_EIM_D24__GPIO3_24 0x13c 0x484 0x000 0x1 0x0 +#define MX53_PAD_EIM_D24__UART3_TXD_MUX 0x13c 0x484 0x000 0x2 0x0 +#define MX53_PAD_EIM_D24__ECSPI1_SS2 0x13c 0x484 0x7b0 0x3 0x1 +#define MX53_PAD_EIM_D24__CSPI_SS2 0x13c 0x484 0x794 0x4 0x1 +#define MX53_PAD_EIM_D24__AUDMUX_AUD5_RXFS 0x13c 0x484 0x754 0x5 0x1 +#define MX53_PAD_EIM_D24__ECSPI2_SS2 0x13c 0x484 0x000 0x6 0x0 +#define MX53_PAD_EIM_D24__UART1_DTR 0x13c 0x484 0x000 0x7 0x0 +#define MX53_PAD_EIM_D25__EMI_WEIM_D_25 0x140 0x488 0x000 0x0 0x0 +#define MX53_PAD_EIM_D25__GPIO3_25 0x140 0x488 0x000 0x1 0x0 +#define MX53_PAD_EIM_D25__UART3_RXD_MUX 0x140 0x488 0x888 0x2 0x1 +#define MX53_PAD_EIM_D25__ECSPI1_SS3 0x140 0x488 0x7b4 0x3 0x1 +#define MX53_PAD_EIM_D25__CSPI_SS3 0x140 0x488 0x798 0x4 0x1 +#define MX53_PAD_EIM_D25__AUDMUX_AUD5_RXC 0x140 0x488 0x750 0x5 0x1 +#define MX53_PAD_EIM_D25__ECSPI2_SS3 0x140 0x488 0x000 0x6 0x0 +#define MX53_PAD_EIM_D25__UART1_DSR 0x140 0x488 0x000 0x7 0x0 +#define MX53_PAD_EIM_D26__EMI_WEIM_D_26 0x144 0x48c 0x000 0x0 0x0 +#define MX53_PAD_EIM_D26__GPIO3_26 0x144 0x48c 0x000 0x1 0x0 +#define MX53_PAD_EIM_D26__UART2_TXD_MUX 0x144 0x48c 0x000 0x2 0x0 +#define MX53_PAD_EIM_D26__FIRI_RXD 0x144 0x48c 0x80c 0x3 0x0 +#define MX53_PAD_EIM_D26__IPU_CSI0_D_1 0x144 0x48c 0x000 0x4 0x0 +#define MX53_PAD_EIM_D26__IPU_DI1_PIN11 0x144 0x48c 0x000 0x5 0x0 +#define MX53_PAD_EIM_D26__IPU_SISG_2 0x144 0x48c 0x000 0x6 0x0 +#define MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 0x144 0x48c 0x000 0x7 0x0 +#define MX53_PAD_EIM_D27__EMI_WEIM_D_27 0x148 0x490 0x000 0x0 0x0 +#define MX53_PAD_EIM_D27__GPIO3_27 0x148 0x490 0x000 0x1 0x0 +#define MX53_PAD_EIM_D27__UART2_RXD_MUX 0x148 0x490 0x880 0x2 0x1 +#define MX53_PAD_EIM_D27__FIRI_TXD 0x148 0x490 0x000 0x3 0x0 +#define MX53_PAD_EIM_D27__IPU_CSI0_D_0 0x148 0x490 0x000 0x4 0x0 +#define MX53_PAD_EIM_D27__IPU_DI1_PIN13 0x148 0x490 0x000 0x5 0x0 +#define MX53_PAD_EIM_D27__IPU_SISG_3 0x148 0x490 0x000 0x6 0x0 +#define MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 0x148 0x490 0x000 0x7 0x0 +#define MX53_PAD_EIM_D28__EMI_WEIM_D_28 0x14c 0x494 0x000 0x0 0x0 +#define MX53_PAD_EIM_D28__GPIO3_28 0x14c 0x494 0x000 0x1 0x0 +#define MX53_PAD_EIM_D28__UART2_CTS 0x14c 0x494 0x000 0x2 0x0 +#define MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO 0x14c 0x494 0x82c 0x3 0x1 +#define MX53_PAD_EIM_D28__CSPI_MOSI 0x14c 0x494 0x788 0x4 0x1 +#define MX53_PAD_EIM_D28__I2C1_SDA 0x14c 0x494 0x818 0x5 0x1 +#define MX53_PAD_EIM_D28__IPU_EXT_TRIG 0x14c 0x494 0x000 0x6 0x0 +#define MX53_PAD_EIM_D28__IPU_DI0_PIN13 0x14c 0x494 0x000 0x7 0x0 +#define MX53_PAD_EIM_D29__EMI_WEIM_D_29 0x150 0x498 0x000 0x0 0x0 +#define MX53_PAD_EIM_D29__GPIO3_29 0x150 0x498 0x000 0x1 0x0 +#define MX53_PAD_EIM_D29__UART2_RTS 0x150 0x498 0x87c 0x2 0x1 +#define MX53_PAD_EIM_D29__IPU_DISPB0_SER_RS 0x150 0x498 0x000 0x3 0x0 +#define MX53_PAD_EIM_D29__CSPI_SS0 0x150 0x498 0x78c 0x4 0x2 +#define MX53_PAD_EIM_D29__IPU_DI1_PIN15 0x150 0x498 0x000 0x5 0x0 +#define MX53_PAD_EIM_D29__IPU_CSI1_VSYNC 0x150 0x498 0x83c 0x6 0x0 +#define MX53_PAD_EIM_D29__IPU_DI0_PIN14 0x150 0x498 0x000 0x7 0x0 +#define MX53_PAD_EIM_D30__EMI_WEIM_D_30 0x154 0x49c 0x000 0x0 0x0 +#define MX53_PAD_EIM_D30__GPIO3_30 0x154 0x49c 0x000 0x1 0x0 +#define MX53_PAD_EIM_D30__UART3_CTS 0x154 0x49c 0x000 0x2 0x0 +#define MX53_PAD_EIM_D30__IPU_CSI0_D_3 0x154 0x49c 0x000 0x3 0x0 +#define MX53_PAD_EIM_D30__IPU_DI0_PIN11 0x154 0x49c 0x000 0x4 0x0 +#define MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 0x154 0x49c 0x000 0x5 0x0 +#define MX53_PAD_EIM_D30__USBOH3_USBH1_OC 0x154 0x49c 0x8a0 0x6 0x0 +#define MX53_PAD_EIM_D30__USBOH3_USBH2_OC 0x154 0x49c 0x8a4 0x7 0x1 +#define MX53_PAD_EIM_D31__EMI_WEIM_D_31 0x158 0x4a0 0x000 0x0 0x0 +#define MX53_PAD_EIM_D31__GPIO3_31 0x158 0x4a0 0x000 0x1 0x0 +#define MX53_PAD_EIM_D31__UART3_RTS 0x158 0x4a0 0x884 0x2 0x3 +#define MX53_PAD_EIM_D31__IPU_CSI0_D_2 0x158 0x4a0 0x000 0x3 0x0 +#define MX53_PAD_EIM_D31__IPU_DI0_PIN12 0x158 0x4a0 0x000 0x4 0x0 +#define MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 0x158 0x4a0 0x000 0x5 0x0 +#define MX53_PAD_EIM_D31__USBOH3_USBH1_PWR 0x158 0x4a0 0x000 0x6 0x0 +#define MX53_PAD_EIM_D31__USBOH3_USBH2_PWR 0x158 0x4a0 0x000 0x7 0x0 +#define MX53_PAD_EIM_A24__EMI_WEIM_A_24 0x15c 0x4a8 0x000 0x0 0x0 +#define MX53_PAD_EIM_A24__GPIO5_4 0x15c 0x4a8 0x000 0x1 0x0 +#define MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 0x15c 0x4a8 0x000 0x2 0x0 +#define MX53_PAD_EIM_A24__IPU_CSI1_D_19 0x15c 0x4a8 0x000 0x3 0x0 +#define MX53_PAD_EIM_A24__IPU_SISG_2 0x15c 0x4a8 0x000 0x6 0x0 +#define MX53_PAD_EIM_A24__USBPHY2_BVALID 0x15c 0x4a8 0x000 0x7 0x0 +#define MX53_PAD_EIM_A23__EMI_WEIM_A_23 0x160 0x4ac 0x000 0x0 0x0 +#define MX53_PAD_EIM_A23__GPIO6_6 0x160 0x4ac 0x000 0x1 0x0 +#define MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 0x160 0x4ac 0x000 0x2 0x0 +#define MX53_PAD_EIM_A23__IPU_CSI1_D_18 0x160 0x4ac 0x000 0x3 0x0 +#define MX53_PAD_EIM_A23__IPU_SISG_3 0x160 0x4ac 0x000 0x6 0x0 +#define MX53_PAD_EIM_A23__USBPHY2_ENDSESSION 0x160 0x4ac 0x000 0x7 0x0 +#define MX53_PAD_EIM_A22__EMI_WEIM_A_22 0x164 0x4b0 0x000 0x0 0x0 +#define MX53_PAD_EIM_A22__GPIO2_16 0x164 0x4b0 0x000 0x1 0x0 +#define MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 0x164 0x4b0 0x000 0x2 0x0 +#define MX53_PAD_EIM_A22__IPU_CSI1_D_17 0x164 0x4b0 0x000 0x3 0x0 +#define MX53_PAD_EIM_A22__SRC_BT_CFG1_7 0x164 0x4b0 0x000 0x7 0x0 +#define MX53_PAD_EIM_A21__EMI_WEIM_A_21 0x168 0x4b4 0x000 0x0 0x0 +#define MX53_PAD_EIM_A21__GPIO2_17 0x168 0x4b4 0x000 0x1 0x0 +#define MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 0x168 0x4b4 0x000 0x2 0x0 +#define MX53_PAD_EIM_A21__IPU_CSI1_D_16 0x168 0x4b4 0x000 0x3 0x0 +#define MX53_PAD_EIM_A21__SRC_BT_CFG1_6 0x168 0x4b4 0x000 0x7 0x0 +#define MX53_PAD_EIM_A20__EMI_WEIM_A_20 0x16c 0x4b8 0x000 0x0 0x0 +#define MX53_PAD_EIM_A20__GPIO2_18 0x16c 0x4b8 0x000 0x1 0x0 +#define MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 0x16c 0x4b8 0x000 0x2 0x0 +#define MX53_PAD_EIM_A20__IPU_CSI1_D_15 0x16c 0x4b8 0x000 0x3 0x0 +#define MX53_PAD_EIM_A20__SRC_BT_CFG1_5 0x16c 0x4b8 0x000 0x7 0x0 +#define MX53_PAD_EIM_A19__EMI_WEIM_A_19 0x170 0x4bc 0x000 0x0 0x0 +#define MX53_PAD_EIM_A19__GPIO2_19 0x170 0x4bc 0x000 0x1 0x0 +#define MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 0x170 0x4bc 0x000 0x2 0x0 +#define MX53_PAD_EIM_A19__IPU_CSI1_D_14 0x170 0x4bc 0x000 0x3 0x0 +#define MX53_PAD_EIM_A19__SRC_BT_CFG1_4 0x170 0x4bc 0x000 0x7 0x0 +#define MX53_PAD_EIM_A18__EMI_WEIM_A_18 0x174 0x4c0 0x000 0x0 0x0 +#define MX53_PAD_EIM_A18__GPIO2_20 0x174 0x4c0 0x000 0x1 0x0 +#define MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 0x174 0x4c0 0x000 0x2 0x0 +#define MX53_PAD_EIM_A18__IPU_CSI1_D_13 0x174 0x4c0 0x000 0x3 0x0 +#define MX53_PAD_EIM_A18__SRC_BT_CFG1_3 0x174 0x4c0 0x000 0x7 0x0 +#define MX53_PAD_EIM_A17__EMI_WEIM_A_17 0x178 0x4c4 0x000 0x0 0x0 +#define MX53_PAD_EIM_A17__GPIO2_21 0x178 0x4c4 0x000 0x1 0x0 +#define MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 0x178 0x4c4 0x000 0x2 0x0 +#define MX53_PAD_EIM_A17__IPU_CSI1_D_12 0x178 0x4c4 0x000 0x3 0x0 +#define MX53_PAD_EIM_A17__SRC_BT_CFG1_2 0x178 0x4c4 0x000 0x7 0x0 +#define MX53_PAD_EIM_A16__EMI_WEIM_A_16 0x17c 0x4c8 0x000 0x0 0x0 +#define MX53_PAD_EIM_A16__GPIO2_22 0x17c 0x4c8 0x000 0x1 0x0 +#define MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK 0x17c 0x4c8 0x000 0x2 0x0 +#define MX53_PAD_EIM_A16__IPU_CSI1_PIXCLK 0x17c 0x4c8 0x000 0x3 0x0 +#define MX53_PAD_EIM_A16__SRC_BT_CFG1_1 0x17c 0x4c8 0x000 0x7 0x0 +#define MX53_PAD_EIM_CS0__EMI_WEIM_CS_0 0x180 0x4cc 0x000 0x0 0x0 +#define MX53_PAD_EIM_CS0__GPIO2_23 0x180 0x4cc 0x000 0x1 0x0 +#define MX53_PAD_EIM_CS0__ECSPI2_SCLK 0x180 0x4cc 0x7b8 0x2 0x2 +#define MX53_PAD_EIM_CS0__IPU_DI1_PIN5 0x180 0x4cc 0x000 0x3 0x0 +#define MX53_PAD_EIM_CS1__EMI_WEIM_CS_1 0x184 0x4d0 0x000 0x0 0x0 +#define MX53_PAD_EIM_CS1__GPIO2_24 0x184 0x4d0 0x000 0x1 0x0 +#define MX53_PAD_EIM_CS1__ECSPI2_MOSI 0x184 0x4d0 0x7c0 0x2 0x2 +#define MX53_PAD_EIM_CS1__IPU_DI1_PIN6 0x184 0x4d0 0x000 0x3 0x0 +#define MX53_PAD_EIM_OE__EMI_WEIM_OE 0x188 0x4d4 0x000 0x0 0x0 +#define MX53_PAD_EIM_OE__GPIO2_25 0x188 0x4d4 0x000 0x1 0x0 +#define MX53_PAD_EIM_OE__ECSPI2_MISO 0x188 0x4d4 0x7bc 0x2 0x2 +#define MX53_PAD_EIM_OE__IPU_DI1_PIN7 0x188 0x4d4 0x000 0x3 0x0 +#define MX53_PAD_EIM_OE__USBPHY2_IDDIG 0x188 0x4d4 0x000 0x7 0x0 +#define MX53_PAD_EIM_RW__EMI_WEIM_RW 0x18c 0x4d8 0x000 0x0 0x0 +#define MX53_PAD_EIM_RW__GPIO2_26 0x18c 0x4d8 0x000 0x1 0x0 +#define MX53_PAD_EIM_RW__ECSPI2_SS0 0x18c 0x4d8 0x7c4 0x2 0x2 +#define MX53_PAD_EIM_RW__IPU_DI1_PIN8 0x18c 0x4d8 0x000 0x3 0x0 +#define MX53_PAD_EIM_RW__USBPHY2_HOSTDISCONNECT 0x18c 0x4d8 0x000 0x7 0x0 +#define MX53_PAD_EIM_LBA__EMI_WEIM_LBA 0x190 0x4dc 0x000 0x0 0x0 +#define MX53_PAD_EIM_LBA__GPIO2_27 0x190 0x4dc 0x000 0x1 0x0 +#define MX53_PAD_EIM_LBA__ECSPI2_SS1 0x190 0x4dc 0x7c8 0x2 0x1 +#define MX53_PAD_EIM_LBA__IPU_DI1_PIN17 0x190 0x4dc 0x000 0x3 0x0 +#define MX53_PAD_EIM_LBA__SRC_BT_CFG1_0 0x190 0x4dc 0x000 0x7 0x0 +#define MX53_PAD_EIM_EB0__EMI_WEIM_EB_0 0x194 0x4e4 0x000 0x0 0x0 +#define MX53_PAD_EIM_EB0__GPIO2_28 0x194 0x4e4 0x000 0x1 0x0 +#define MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 0x194 0x4e4 0x000 0x3 0x0 +#define MX53_PAD_EIM_EB0__IPU_CSI1_D_11 0x194 0x4e4 0x000 0x4 0x0 +#define MX53_PAD_EIM_EB0__GPC_PMIC_RDY 0x194 0x4e4 0x810 0x5 0x0 +#define MX53_PAD_EIM_EB0__SRC_BT_CFG2_7 0x194 0x4e4 0x000 0x7 0x0 +#define MX53_PAD_EIM_EB1__EMI_WEIM_EB_1 0x198 0x4e8 0x000 0x0 0x0 +#define MX53_PAD_EIM_EB1__GPIO2_29 0x198 0x4e8 0x000 0x1 0x0 +#define MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 0x198 0x4e8 0x000 0x3 0x0 +#define MX53_PAD_EIM_EB1__IPU_CSI1_D_10 0x198 0x4e8 0x000 0x4 0x0 +#define MX53_PAD_EIM_EB1__SRC_BT_CFG2_6 0x198 0x4e8 0x000 0x7 0x0 +#define MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 0x19c 0x4ec 0x000 0x0 0x0 +#define MX53_PAD_EIM_DA0__GPIO3_0 0x19c 0x4ec 0x000 0x1 0x0 +#define MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9 0x19c 0x4ec 0x000 0x3 0x0 +#define MX53_PAD_EIM_DA0__IPU_CSI1_D_9 0x19c 0x4ec 0x000 0x4 0x0 +#define MX53_PAD_EIM_DA0__SRC_BT_CFG2_5 0x19c 0x4ec 0x000 0x7 0x0 +#define MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 0x1a0 0x4f0 0x000 0x0 0x0 +#define MX53_PAD_EIM_DA1__GPIO3_1 0x1a0 0x4f0 0x000 0x1 0x0 +#define MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8 0x1a0 0x4f0 0x000 0x3 0x0 +#define MX53_PAD_EIM_DA1__IPU_CSI1_D_8 0x1a0 0x4f0 0x000 0x4 0x0 +#define MX53_PAD_EIM_DA1__SRC_BT_CFG2_4 0x1a0 0x4f0 0x000 0x7 0x0 +#define MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 0x1a4 0x4f4 0x000 0x0 0x0 +#define MX53_PAD_EIM_DA2__GPIO3_2 0x1a4 0x4f4 0x000 0x1 0x0 +#define MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7 0x1a4 0x4f4 0x000 0x3 0x0 +#define MX53_PAD_EIM_DA2__IPU_CSI1_D_7 0x1a4 0x4f4 0x000 0x4 0x0 +#define MX53_PAD_EIM_DA2__SRC_BT_CFG2_3 0x1a4 0x4f4 0x000 0x7 0x0 +#define MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 0x1a8 0x4f8 0x000 0x0 0x0 +#define MX53_PAD_EIM_DA3__GPIO3_3 0x1a8 0x4f8 0x000 0x1 0x0 +#define MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6 0x1a8 0x4f8 0x000 0x3 0x0 +#define MX53_PAD_EIM_DA3__IPU_CSI1_D_6 0x1a8 0x4f8 0x000 0x4 0x0 +#define MX53_PAD_EIM_DA3__SRC_BT_CFG2_2 0x1a8 0x4f8 0x000 0x7 0x0 +#define MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 0x1ac 0x4fc 0x000 0x0 0x0 +#define MX53_PAD_EIM_DA4__GPIO3_4 0x1ac 0x4fc 0x000 0x1 0x0 +#define MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5 0x1ac 0x4fc 0x000 0x3 0x0 +#define MX53_PAD_EIM_DA4__IPU_CSI1_D_5 0x1ac 0x4fc 0x000 0x4 0x0 +#define MX53_PAD_EIM_DA4__SRC_BT_CFG3_7 0x1ac 0x4fc 0x000 0x7 0x0 +#define MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 0x1b0 0x500 0x000 0x0 0x0 +#define MX53_PAD_EIM_DA5__GPIO3_5 0x1b0 0x500 0x000 0x1 0x0 +#define MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 0x1b0 0x500 0x000 0x3 0x0 +#define MX53_PAD_EIM_DA5__IPU_CSI1_D_4 0x1b0 0x500 0x000 0x4 0x0 +#define MX53_PAD_EIM_DA5__SRC_BT_CFG3_6 0x1b0 0x500 0x000 0x7 0x0 +#define MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 0x1b4 0x504 0x000 0x0 0x0 +#define MX53_PAD_EIM_DA6__GPIO3_6 0x1b4 0x504 0x000 0x1 0x0 +#define MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 0x1b4 0x504 0x000 0x3 0x0 +#define MX53_PAD_EIM_DA6__IPU_CSI1_D_3 0x1b4 0x504 0x000 0x4 0x0 +#define MX53_PAD_EIM_DA6__SRC_BT_CFG3_5 0x1b4 0x504 0x000 0x7 0x0 +#define MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7 0x1b8 0x508 0x000 0x0 0x0 +#define MX53_PAD_EIM_DA7__GPIO3_7 0x1b8 0x508 0x000 0x1 0x0 +#define MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2 0x1b8 0x508 0x000 0x3 0x0 +#define MX53_PAD_EIM_DA7__IPU_CSI1_D_2 0x1b8 0x508 0x000 0x4 0x0 +#define MX53_PAD_EIM_DA7__SRC_BT_CFG3_4 0x1b8 0x508 0x000 0x7 0x0 +#define MX53_PAD_EIM_DA8__EMI_NAND_WEIM_DA_8 0x1bc 0x50c 0x000 0x0 0x0 +#define MX53_PAD_EIM_DA8__GPIO3_8 0x1bc 0x50c 0x000 0x1 0x0 +#define MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1 0x1bc 0x50c 0x000 0x3 0x0 +#define MX53_PAD_EIM_DA8__IPU_CSI1_D_1 0x1bc 0x50c 0x000 0x4 0x0 +#define MX53_PAD_EIM_DA8__SRC_BT_CFG3_3 0x1bc 0x50c 0x000 0x7 0x0 +#define MX53_PAD_EIM_DA9__EMI_NAND_WEIM_DA_9 0x1c0 0x510 0x000 0x0 0x0 +#define MX53_PAD_EIM_DA9__GPIO3_9 0x1c0 0x510 0x000 0x1 0x0 +#define MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0 0x1c0 0x510 0x000 0x3 0x0 +#define MX53_PAD_EIM_DA9__IPU_CSI1_D_0 0x1c0 0x510 0x000 0x4 0x0 +#define MX53_PAD_EIM_DA9__SRC_BT_CFG3_2 0x1c0 0x510 0x000 0x7 0x0 +#define MX53_PAD_EIM_DA10__EMI_NAND_WEIM_DA_10 0x1c4 0x514 0x000 0x0 0x0 +#define MX53_PAD_EIM_DA10__GPIO3_10 0x1c4 0x514 0x000 0x1 0x0 +#define MX53_PAD_EIM_DA10__IPU_DI1_PIN15 0x1c4 0x514 0x000 0x3 0x0 +#define MX53_PAD_EIM_DA10__IPU_CSI1_DATA_EN 0x1c4 0x514 0x834 0x4 0x1 +#define MX53_PAD_EIM_DA10__SRC_BT_CFG3_1 0x1c4 0x514 0x000 0x7 0x0 +#define MX53_PAD_EIM_DA11__EMI_NAND_WEIM_DA_11 0x1c8 0x518 0x000 0x0 0x0 +#define MX53_PAD_EIM_DA11__GPIO3_11 0x1c8 0x518 0x000 0x1 0x0 +#define MX53_PAD_EIM_DA11__IPU_DI1_PIN2 0x1c8 0x518 0x000 0x3 0x0 +#define MX53_PAD_EIM_DA11__IPU_CSI1_HSYNC 0x1c8 0x518 0x838 0x4 0x1 +#define MX53_PAD_EIM_DA12__EMI_NAND_WEIM_DA_12 0x1cc 0x51c 0x000 0x0 0x0 +#define MX53_PAD_EIM_DA12__GPIO3_12 0x1cc 0x51c 0x000 0x1 0x0 +#define MX53_PAD_EIM_DA12__IPU_DI1_PIN3 0x1cc 0x51c 0x000 0x3 0x0 +#define MX53_PAD_EIM_DA12__IPU_CSI1_VSYNC 0x1cc 0x51c 0x83c 0x4 0x1 +#define MX53_PAD_EIM_DA13__EMI_NAND_WEIM_DA_13 0x1d0 0x520 0x000 0x0 0x0 +#define MX53_PAD_EIM_DA13__GPIO3_13 0x1d0 0x520 0x000 0x1 0x0 +#define MX53_PAD_EIM_DA13__IPU_DI1_D0_CS 0x1d0 0x520 0x000 0x3 0x0 +#define MX53_PAD_EIM_DA13__CCM_DI1_EXT_CLK 0x1d0 0x520 0x76c 0x4 0x1 +#define MX53_PAD_EIM_DA14__EMI_NAND_WEIM_DA_14 0x1d4 0x524 0x000 0x0 0x0 +#define MX53_PAD_EIM_DA14__GPIO3_14 0x1d4 0x524 0x000 0x1 0x0 +#define MX53_PAD_EIM_DA14__IPU_DI1_D1_CS 0x1d4 0x524 0x000 0x3 0x0 +#define MX53_PAD_EIM_DA14__CCM_DI0_EXT_CLK 0x1d4 0x524 0x000 0x4 0x0 +#define MX53_PAD_EIM_DA15__EMI_NAND_WEIM_DA_15 0x1d8 0x528 0x000 0x0 0x0 +#define MX53_PAD_EIM_DA15__GPIO3_15 0x1d8 0x528 0x000 0x1 0x0 +#define MX53_PAD_EIM_DA15__IPU_DI1_PIN1 0x1d8 0x528 0x000 0x3 0x0 +#define MX53_PAD_EIM_DA15__IPU_DI1_PIN4 0x1d8 0x528 0x000 0x4 0x0 +#define MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B 0x1dc 0x52c 0x000 0x0 0x0 +#define MX53_PAD_NANDF_WE_B__GPIO6_12 0x1dc 0x52c 0x000 0x1 0x0 +#define MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B 0x1e0 0x530 0x000 0x0 0x0 +#define MX53_PAD_NANDF_RE_B__GPIO6_13 0x1e0 0x530 0x000 0x1 0x0 +#define MX53_PAD_EIM_WAIT__EMI_WEIM_WAIT 0x1e4 0x534 0x000 0x0 0x0 +#define MX53_PAD_EIM_WAIT__GPIO5_0 0x1e4 0x534 0x000 0x1 0x0 +#define MX53_PAD_EIM_WAIT__EMI_WEIM_DTACK_B 0x1e4 0x534 0x000 0x2 0x0 +#define MX53_PAD_LVDS1_TX3_P__GPIO6_22 0x1ec 0x000 0x000 0x0 0x0 +#define MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 0x1ec 0x000 0x000 0x1 0x0 +#define MX53_PAD_LVDS1_TX2_P__GPIO6_24 0x1f0 0x000 0x000 0x0 0x0 +#define MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 0x1f0 0x000 0x000 0x1 0x0 +#define MX53_PAD_LVDS1_CLK_P__GPIO6_26 0x1f4 0x000 0x000 0x0 0x0 +#define MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK 0x1f4 0x000 0x000 0x1 0x0 +#define MX53_PAD_LVDS1_TX1_P__GPIO6_28 0x1f8 0x000 0x000 0x0 0x0 +#define MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 0x1f8 0x000 0x000 0x1 0x0 +#define MX53_PAD_LVDS1_TX0_P__GPIO6_30 0x1fc 0x000 0x000 0x0 0x0 +#define MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 0x1fc 0x000 0x000 0x1 0x0 +#define MX53_PAD_LVDS0_TX3_P__GPIO7_22 0x200 0x000 0x000 0x0 0x0 +#define MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x200 0x000 0x000 0x1 0x0 +#define MX53_PAD_LVDS0_CLK_P__GPIO7_24 0x204 0x000 0x000 0x0 0x0 +#define MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 0x204 0x000 0x000 0x1 0x0 +#define MX53_PAD_LVDS0_TX2_P__GPIO7_26 0x208 0x000 0x000 0x0 0x0 +#define MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 0x208 0x000 0x000 0x1 0x0 +#define MX53_PAD_LVDS0_TX1_P__GPIO7_28 0x20c 0x000 0x000 0x0 0x0 +#define MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 0x20c 0x000 0x000 0x1 0x0 +#define MX53_PAD_LVDS0_TX0_P__GPIO7_30 0x210 0x000 0x000 0x0 0x0 +#define MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 0x210 0x000 0x000 0x1 0x0 +#define MX53_PAD_GPIO_10__GPIO4_0 0x214 0x540 0x000 0x0 0x0 +#define MX53_PAD_GPIO_10__OSC32k_32K_OUT 0x214 0x540 0x000 0x1 0x0 +#define MX53_PAD_GPIO_11__GPIO4_1 0x218 0x544 0x000 0x0 0x0 +#define MX53_PAD_GPIO_12__GPIO4_2 0x21c 0x548 0x000 0x0 0x0 +#define MX53_PAD_GPIO_13__GPIO4_3 0x220 0x54c 0x000 0x0 0x0 +#define MX53_PAD_GPIO_14__GPIO4_4 0x224 0x550 0x000 0x0 0x0 +#define MX53_PAD_NANDF_CLE__EMI_NANDF_CLE 0x228 0x5a0 0x000 0x0 0x0 +#define MX53_PAD_NANDF_CLE__GPIO6_7 0x228 0x5a0 0x000 0x1 0x0 +#define MX53_PAD_NANDF_CLE__USBPHY1_VSTATUS_0 0x228 0x5a0 0x000 0x7 0x0 +#define MX53_PAD_NANDF_ALE__EMI_NANDF_ALE 0x22c 0x5a4 0x000 0x0 0x0 +#define MX53_PAD_NANDF_ALE__GPIO6_8 0x22c 0x5a4 0x000 0x1 0x0 +#define MX53_PAD_NANDF_ALE__USBPHY1_VSTATUS_1 0x22c 0x5a4 0x000 0x7 0x0 +#define MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B 0x230 0x5a8 0x000 0x0 0x0 +#define MX53_PAD_NANDF_WP_B__GPIO6_9 0x230 0x5a8 0x000 0x1 0x0 +#define MX53_PAD_NANDF_WP_B__USBPHY1_VSTATUS_2 0x230 0x5a8 0x000 0x7 0x0 +#define MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 0x234 0x5ac 0x000 0x0 0x0 +#define MX53_PAD_NANDF_RB0__GPIO6_10 0x234 0x5ac 0x000 0x1 0x0 +#define MX53_PAD_NANDF_RB0__USBPHY1_VSTATUS_3 0x234 0x5ac 0x000 0x7 0x0 +#define MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 0x238 0x5b0 0x000 0x0 0x0 +#define MX53_PAD_NANDF_CS0__GPIO6_11 0x238 0x5b0 0x000 0x1 0x0 +#define MX53_PAD_NANDF_CS0__USBPHY1_VSTATUS_4 0x238 0x5b0 0x000 0x7 0x0 +#define MX53_PAD_NANDF_CS1__EMI_NANDF_CS_1 0x23c 0x5b4 0x000 0x0 0x0 +#define MX53_PAD_NANDF_CS1__GPIO6_14 0x23c 0x5b4 0x000 0x1 0x0 +#define MX53_PAD_NANDF_CS1__MLB_MLBCLK 0x23c 0x5b4 0x858 0x6 0x0 +#define MX53_PAD_NANDF_CS1__USBPHY1_VSTATUS_5 0x23c 0x5b4 0x000 0x7 0x0 +#define MX53_PAD_NANDF_CS2__EMI_NANDF_CS_2 0x240 0x5b8 0x000 0x0 0x0 +#define MX53_PAD_NANDF_CS2__GPIO6_15 0x240 0x5b8 0x000 0x1 0x0 +#define MX53_PAD_NANDF_CS2__IPU_SISG_0 0x240 0x5b8 0x000 0x2 0x0 +#define MX53_PAD_NANDF_CS2__ESAI1_TX0 0x240 0x5b8 0x7e4 0x3 0x0 +#define MX53_PAD_NANDF_CS2__EMI_WEIM_CRE 0x240 0x5b8 0x000 0x4 0x0 +#define MX53_PAD_NANDF_CS2__CCM_CSI0_MCLK 0x240 0x5b8 0x000 0x5 0x0 +#define MX53_PAD_NANDF_CS2__MLB_MLBSIG 0x240 0x5b8 0x860 0x6 0x0 +#define MX53_PAD_NANDF_CS2__USBPHY1_VSTATUS_6 0x240 0x5b8 0x000 0x7 0x0 +#define MX53_PAD_NANDF_CS3__EMI_NANDF_CS_3 0x244 0x5bc 0x000 0x0 0x0 +#define MX53_PAD_NANDF_CS3__GPIO6_16 0x244 0x5bc 0x000 0x1 0x0 +#define MX53_PAD_NANDF_CS3__IPU_SISG_1 0x244 0x5bc 0x000 0x2 0x0 +#define MX53_PAD_NANDF_CS3__ESAI1_TX1 0x244 0x5bc 0x7e8 0x3 0x0 +#define MX53_PAD_NANDF_CS3__EMI_WEIM_A_26 0x244 0x5bc 0x000 0x4 0x0 +#define MX53_PAD_NANDF_CS3__MLB_MLBDAT 0x244 0x5bc 0x85c 0x6 0x0 +#define MX53_PAD_NANDF_CS3__USBPHY1_VSTATUS_7 0x244 0x5bc 0x000 0x7 0x0 +#define MX53_PAD_FEC_MDIO__FEC_MDIO 0x248 0x5c4 0x804 0x0 0x1 +#define MX53_PAD_FEC_MDIO__GPIO1_22 0x248 0x5c4 0x000 0x1 0x0 +#define MX53_PAD_FEC_MDIO__ESAI1_SCKR 0x248 0x5c4 0x7dc 0x2 0x0 +#define MX53_PAD_FEC_MDIO__FEC_COL 0x248 0x5c4 0x800 0x3 0x1 +#define MX53_PAD_FEC_MDIO__RTC_CE_RTC_PS2 0x248 0x5c4 0x000 0x4 0x0 +#define MX53_PAD_FEC_MDIO__SDMA_DEBUG_BUS_DEVICE_3 0x248 0x5c4 0x000 0x5 0x0 +#define MX53_PAD_FEC_MDIO__EMI_EMI_DEBUG_49 0x248 0x5c4 0x000 0x6 0x0 +#define MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x24c 0x5c8 0x000 0x0 0x0 +#define MX53_PAD_FEC_REF_CLK__GPIO1_23 0x24c 0x5c8 0x000 0x1 0x0 +#define MX53_PAD_FEC_REF_CLK__ESAI1_FSR 0x24c 0x5c8 0x7cc 0x2 0x0 +#define MX53_PAD_FEC_REF_CLK__SDMA_DEBUG_BUS_DEVICE_4 0x24c 0x5c8 0x000 0x5 0x0 +#define MX53_PAD_FEC_REF_CLK__EMI_EMI_DEBUG_50 0x24c 0x5c8 0x000 0x6 0x0 +#define MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x250 0x5cc 0x000 0x0 0x0 +#define MX53_PAD_FEC_RX_ER__GPIO1_24 0x250 0x5cc 0x000 0x1 0x0 +#define MX53_PAD_FEC_RX_ER__ESAI1_HCKR 0x250 0x5cc 0x7d4 0x2 0x0 +#define MX53_PAD_FEC_RX_ER__FEC_RX_CLK 0x250 0x5cc 0x808 0x3 0x1 +#define MX53_PAD_FEC_RX_ER__RTC_CE_RTC_PS3 0x250 0x5cc 0x000 0x4 0x0 +#define MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x254 0x5d0 0x000 0x0 0x0 +#define MX53_PAD_FEC_CRS_DV__GPIO1_25 0x254 0x5d0 0x000 0x1 0x0 +#define MX53_PAD_FEC_CRS_DV__ESAI1_SCKT 0x254 0x5d0 0x7e0 0x2 0x0 +#define MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x258 0x5d4 0x000 0x0 0x0 +#define MX53_PAD_FEC_RXD1__GPIO1_26 0x258 0x5d4 0x000 0x1 0x0 +#define MX53_PAD_FEC_RXD1__ESAI1_FST 0x258 0x5d4 0x7d0 0x2 0x0 +#define MX53_PAD_FEC_RXD1__MLB_MLBSIG 0x258 0x5d4 0x860 0x3 0x1 +#define MX53_PAD_FEC_RXD1__RTC_CE_RTC_PS1 0x258 0x5d4 0x000 0x4 0x0 +#define MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x25c 0x5d8 0x000 0x0 0x0 +#define MX53_PAD_FEC_RXD0__GPIO1_27 0x25c 0x5d8 0x000 0x1 0x0 +#define MX53_PAD_FEC_RXD0__ESAI1_HCKT 0x25c 0x5d8 0x7d8 0x2 0x0 +#define MX53_PAD_FEC_RXD0__OSC32k_32K_OUT 0x25c 0x5d8 0x000 0x3 0x0 +#define MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x260 0x5dc 0x000 0x0 0x0 +#define MX53_PAD_FEC_TX_EN__GPIO1_28 0x260 0x5dc 0x000 0x1 0x0 +#define MX53_PAD_FEC_TX_EN__ESAI1_TX3_RX2 0x260 0x5dc 0x7f0 0x2 0x0 +#define MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x264 0x5e0 0x000 0x0 0x0 +#define MX53_PAD_FEC_TXD1__GPIO1_29 0x264 0x5e0 0x000 0x1 0x0 +#define MX53_PAD_FEC_TXD1__ESAI1_TX2_RX3 0x264 0x5e0 0x7ec 0x2 0x0 +#define MX53_PAD_FEC_TXD1__MLB_MLBCLK 0x264 0x5e0 0x858 0x3 0x1 +#define MX53_PAD_FEC_TXD1__RTC_CE_RTC_PRSC_CLK 0x264 0x5e0 0x000 0x4 0x0 +#define MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x268 0x5e4 0x000 0x0 0x0 +#define MX53_PAD_FEC_TXD0__GPIO1_30 0x268 0x5e4 0x000 0x1 0x0 +#define MX53_PAD_FEC_TXD0__ESAI1_TX4_RX1 0x268 0x5e4 0x7f4 0x2 0x0 +#define MX53_PAD_FEC_TXD0__USBPHY2_DATAOUT_0 0x268 0x5e4 0x000 0x7 0x0 +#define MX53_PAD_FEC_MDC__FEC_MDC 0x26c 0x5e8 0x000 0x0 0x0 +#define MX53_PAD_FEC_MDC__GPIO1_31 0x26c 0x5e8 0x000 0x1 0x0 +#define MX53_PAD_FEC_MDC__ESAI1_TX5_RX0 0x26c 0x5e8 0x7f8 0x2 0x0 +#define MX53_PAD_FEC_MDC__MLB_MLBDAT 0x26c 0x5e8 0x85c 0x3 0x1 +#define MX53_PAD_FEC_MDC__RTC_CE_RTC_ALARM1_TRIG 0x26c 0x5e8 0x000 0x4 0x0 +#define MX53_PAD_FEC_MDC__USBPHY2_DATAOUT_1 0x26c 0x5e8 0x000 0x7 0x0 +#define MX53_PAD_PATA_DIOW__PATA_DIOW 0x270 0x5f0 0x000 0x0 0x0 +#define MX53_PAD_PATA_DIOW__GPIO6_17 0x270 0x5f0 0x000 0x1 0x0 +#define MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x270 0x5f0 0x000 0x3 0x0 +#define MX53_PAD_PATA_DIOW__USBPHY2_DATAOUT_2 0x270 0x5f0 0x000 0x7 0x0 +#define MX53_PAD_PATA_DMACK__PATA_DMACK 0x274 0x5f4 0x000 0x0 0x0 +#define MX53_PAD_PATA_DMACK__GPIO6_18 0x274 0x5f4 0x000 0x1 0x0 +#define MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x274 0x5f4 0x878 0x3 0x3 +#define MX53_PAD_PATA_DMACK__USBPHY2_DATAOUT_3 0x274 0x5f4 0x000 0x7 0x0 +#define MX53_PAD_PATA_DMARQ__PATA_DMARQ 0x278 0x5f8 0x000 0x0 0x0 +#define MX53_PAD_PATA_DMARQ__GPIO7_0 0x278 0x5f8 0x000 0x1 0x0 +#define MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x278 0x5f8 0x000 0x3 0x0 +#define MX53_PAD_PATA_DMARQ__CCM_CCM_OUT_0 0x278 0x5f8 0x000 0x5 0x0 +#define MX53_PAD_PATA_DMARQ__USBPHY2_DATAOUT_4 0x278 0x5f8 0x000 0x7 0x0 +#define MX53_PAD_PATA_BUFFER_EN__PATA_BUFFER_EN 0x27c 0x5fc 0x000 0x0 0x0 +#define MX53_PAD_PATA_BUFFER_EN__GPIO7_1 0x27c 0x5fc 0x000 0x1 0x0 +#define MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x27c 0x5fc 0x880 0x3 0x3 +#define MX53_PAD_PATA_BUFFER_EN__CCM_CCM_OUT_1 0x27c 0x5fc 0x000 0x5 0x0 +#define MX53_PAD_PATA_BUFFER_EN__USBPHY2_DATAOUT_5 0x27c 0x5fc 0x000 0x7 0x0 +#define MX53_PAD_PATA_INTRQ__PATA_INTRQ 0x280 0x600 0x000 0x0 0x0 +#define MX53_PAD_PATA_INTRQ__GPIO7_2 0x280 0x600 0x000 0x1 0x0 +#define MX53_PAD_PATA_INTRQ__UART2_CTS 0x280 0x600 0x000 0x3 0x0 +#define MX53_PAD_PATA_INTRQ__CAN1_TXCAN 0x280 0x600 0x000 0x4 0x0 +#define MX53_PAD_PATA_INTRQ__CCM_CCM_OUT_2 0x280 0x600 0x000 0x5 0x0 +#define MX53_PAD_PATA_INTRQ__USBPHY2_DATAOUT_6 0x280 0x600 0x000 0x7 0x0 +#define MX53_PAD_PATA_DIOR__PATA_DIOR 0x284 0x604 0x000 0x0 0x0 +#define MX53_PAD_PATA_DIOR__GPIO7_3 0x284 0x604 0x000 0x1 0x0 +#define MX53_PAD_PATA_DIOR__UART2_RTS 0x284 0x604 0x87c 0x3 0x3 +#define MX53_PAD_PATA_DIOR__CAN1_RXCAN 0x284 0x604 0x760 0x4 0x1 +#define MX53_PAD_PATA_DIOR__USBPHY2_DATAOUT_7 0x284 0x604 0x000 0x7 0x0 +#define MX53_PAD_PATA_RESET_B__PATA_PATA_RESET_B 0x288 0x608 0x000 0x0 0x0 +#define MX53_PAD_PATA_RESET_B__GPIO7_4 0x288 0x608 0x000 0x1 0x0 +#define MX53_PAD_PATA_RESET_B__ESDHC3_CMD 0x288 0x608 0x000 0x2 0x0 +#define MX53_PAD_PATA_RESET_B__UART1_CTS 0x288 0x608 0x000 0x3 0x0 +#define MX53_PAD_PATA_RESET_B__CAN2_TXCAN 0x288 0x608 0x000 0x4 0x0 +#define MX53_PAD_PATA_RESET_B__USBPHY1_DATAOUT_0 0x288 0x608 0x000 0x7 0x0 +#define MX53_PAD_PATA_IORDY__PATA_IORDY 0x28c 0x60c 0x000 0x0 0x0 +#define MX53_PAD_PATA_IORDY__GPIO7_5 0x28c 0x60c 0x000 0x1 0x0 +#define MX53_PAD_PATA_IORDY__ESDHC3_CLK 0x28c 0x60c 0x000 0x2 0x0 +#define MX53_PAD_PATA_IORDY__UART1_RTS 0x28c 0x60c 0x874 0x3 0x3 +#define MX53_PAD_PATA_IORDY__CAN2_RXCAN 0x28c 0x60c 0x764 0x4 0x1 +#define MX53_PAD_PATA_IORDY__USBPHY1_DATAOUT_1 0x28c 0x60c 0x000 0x7 0x0 +#define MX53_PAD_PATA_DA_0__PATA_DA_0 0x290 0x610 0x000 0x0 0x0 +#define MX53_PAD_PATA_DA_0__GPIO7_6 0x290 0x610 0x000 0x1 0x0 +#define MX53_PAD_PATA_DA_0__ESDHC3_RST 0x290 0x610 0x000 0x2 0x0 +#define MX53_PAD_PATA_DA_0__OWIRE_LINE 0x290 0x610 0x864 0x4 0x0 +#define MX53_PAD_PATA_DA_0__USBPHY1_DATAOUT_2 0x290 0x610 0x000 0x7 0x0 +#define MX53_PAD_PATA_DA_1__PATA_DA_1 0x294 0x614 0x000 0x0 0x0 +#define MX53_PAD_PATA_DA_1__GPIO7_7 0x294 0x614 0x000 0x1 0x0 +#define MX53_PAD_PATA_DA_1__ESDHC4_CMD 0x294 0x614 0x000 0x2 0x0 +#define MX53_PAD_PATA_DA_1__UART3_CTS 0x294 0x614 0x000 0x4 0x0 +#define MX53_PAD_PATA_DA_1__USBPHY1_DATAOUT_3 0x294 0x614 0x000 0x7 0x0 +#define MX53_PAD_PATA_DA_2__PATA_DA_2 0x298 0x618 0x000 0x0 0x0 +#define MX53_PAD_PATA_DA_2__GPIO7_8 0x298 0x618 0x000 0x1 0x0 +#define MX53_PAD_PATA_DA_2__ESDHC4_CLK 0x298 0x618 0x000 0x2 0x0 +#define MX53_PAD_PATA_DA_2__UART3_RTS 0x298 0x618 0x884 0x4 0x5 +#define MX53_PAD_PATA_DA_2__USBPHY1_DATAOUT_4 0x298 0x618 0x000 0x7 0x0 +#define MX53_PAD_PATA_CS_0__PATA_CS_0 0x29c 0x61c 0x000 0x0 0x0 +#define MX53_PAD_PATA_CS_0__GPIO7_9 0x29c 0x61c 0x000 0x1 0x0 +#define MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x29c 0x61c 0x000 0x4 0x0 +#define MX53_PAD_PATA_CS_0__USBPHY1_DATAOUT_5 0x29c 0x61c 0x000 0x7 0x0 +#define MX53_PAD_PATA_CS_1__PATA_CS_1 0x2a0 0x620 0x000 0x0 0x0 +#define MX53_PAD_PATA_CS_1__GPIO7_10 0x2a0 0x620 0x000 0x1 0x0 +#define MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x2a0 0x620 0x888 0x4 0x3 +#define MX53_PAD_PATA_CS_1__USBPHY1_DATAOUT_6 0x2a0 0x620 0x000 0x7 0x0 +#define MX53_PAD_PATA_DATA0__PATA_DATA_0 0x2a4 0x628 0x000 0x0 0x0 +#define MX53_PAD_PATA_DATA0__GPIO2_0 0x2a4 0x628 0x000 0x1 0x0 +#define MX53_PAD_PATA_DATA0__EMI_NANDF_D_0 0x2a4 0x628 0x000 0x3 0x0 +#define MX53_PAD_PATA_DATA0__ESDHC3_DAT4 0x2a4 0x628 0x000 0x4 0x0 +#define MX53_PAD_PATA_DATA0__GPU3d_GPU_DEBUG_OUT_0 0x2a4 0x628 0x000 0x5 0x0 +#define MX53_PAD_PATA_DATA0__IPU_DIAG_BUS_0 0x2a4 0x628 0x000 0x6 0x0 +#define MX53_PAD_PATA_DATA0__USBPHY1_DATAOUT_7 0x2a4 0x628 0x000 0x7 0x0 +#define MX53_PAD_PATA_DATA1__PATA_DATA_1 0x2a8 0x62c 0x000 0x0 0x0 +#define MX53_PAD_PATA_DATA1__GPIO2_1 0x2a8 0x62c 0x000 0x1 0x0 +#define MX53_PAD_PATA_DATA1__EMI_NANDF_D_1 0x2a8 0x62c 0x000 0x3 0x0 +#define MX53_PAD_PATA_DATA1__ESDHC3_DAT5 0x2a8 0x62c 0x000 0x4 0x0 +#define MX53_PAD_PATA_DATA1__GPU3d_GPU_DEBUG_OUT_1 0x2a8 0x62c 0x000 0x5 0x0 +#define MX53_PAD_PATA_DATA1__IPU_DIAG_BUS_1 0x2a8 0x62c 0x000 0x6 0x0 +#define MX53_PAD_PATA_DATA2__PATA_DATA_2 0x2ac 0x630 0x000 0x0 0x0 +#define MX53_PAD_PATA_DATA2__GPIO2_2 0x2ac 0x630 0x000 0x1 0x0 +#define MX53_PAD_PATA_DATA2__EMI_NANDF_D_2 0x2ac 0x630 0x000 0x3 0x0 +#define MX53_PAD_PATA_DATA2__ESDHC3_DAT6 0x2ac 0x630 0x000 0x4 0x0 +#define MX53_PAD_PATA_DATA2__GPU3d_GPU_DEBUG_OUT_2 0x2ac 0x630 0x000 0x5 0x0 +#define MX53_PAD_PATA_DATA2__IPU_DIAG_BUS_2 0x2ac 0x630 0x000 0x6 0x0 +#define MX53_PAD_PATA_DATA3__PATA_DATA_3 0x2b0 0x634 0x000 0x0 0x0 +#define MX53_PAD_PATA_DATA3__GPIO2_3 0x2b0 0x634 0x000 0x1 0x0 +#define MX53_PAD_PATA_DATA3__EMI_NANDF_D_3 0x2b0 0x634 0x000 0x3 0x0 +#define MX53_PAD_PATA_DATA3__ESDHC3_DAT7 0x2b0 0x634 0x000 0x4 0x0 +#define MX53_PAD_PATA_DATA3__GPU3d_GPU_DEBUG_OUT_3 0x2b0 0x634 0x000 0x5 0x0 +#define MX53_PAD_PATA_DATA3__IPU_DIAG_BUS_3 0x2b0 0x634 0x000 0x6 0x0 +#define MX53_PAD_PATA_DATA4__PATA_DATA_4 0x2b4 0x638 0x000 0x0 0x0 +#define MX53_PAD_PATA_DATA4__GPIO2_4 0x2b4 0x638 0x000 0x1 0x0 +#define MX53_PAD_PATA_DATA4__EMI_NANDF_D_4 0x2b4 0x638 0x000 0x3 0x0 +#define MX53_PAD_PATA_DATA4__ESDHC4_DAT4 0x2b4 0x638 0x000 0x4 0x0 +#define MX53_PAD_PATA_DATA4__GPU3d_GPU_DEBUG_OUT_4 0x2b4 0x638 0x000 0x5 0x0 +#define MX53_PAD_PATA_DATA4__IPU_DIAG_BUS_4 0x2b4 0x638 0x000 0x6 0x0 +#define MX53_PAD_PATA_DATA5__PATA_DATA_5 0x2b8 0x63c 0x000 0x0 0x0 +#define MX53_PAD_PATA_DATA5__GPIO2_5 0x2b8 0x63c 0x000 0x1 0x0 +#define MX53_PAD_PATA_DATA5__EMI_NANDF_D_5 0x2b8 0x63c 0x000 0x3 0x0 +#define MX53_PAD_PATA_DATA5__ESDHC4_DAT5 0x2b8 0x63c 0x000 0x4 0x0 +#define MX53_PAD_PATA_DATA5__GPU3d_GPU_DEBUG_OUT_5 0x2b8 0x63c 0x000 0x5 0x0 +#define MX53_PAD_PATA_DATA5__IPU_DIAG_BUS_5 0x2b8 0x63c 0x000 0x6 0x0 +#define MX53_PAD_PATA_DATA6__PATA_DATA_6 0x2bc 0x640 0x000 0x0 0x0 +#define MX53_PAD_PATA_DATA6__GPIO2_6 0x2bc 0x640 0x000 0x1 0x0 +#define MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 0x2bc 0x640 0x000 0x3 0x0 +#define MX53_PAD_PATA_DATA6__ESDHC4_DAT6 0x2bc 0x640 0x000 0x4 0x0 +#define MX53_PAD_PATA_DATA6__GPU3d_GPU_DEBUG_OUT_6 0x2bc 0x640 0x000 0x5 0x0 +#define MX53_PAD_PATA_DATA6__IPU_DIAG_BUS_6 0x2bc 0x640 0x000 0x6 0x0 +#define MX53_PAD_PATA_DATA7__PATA_DATA_7 0x2c0 0x644 0x000 0x0 0x0 +#define MX53_PAD_PATA_DATA7__GPIO2_7 0x2c0 0x644 0x000 0x1 0x0 +#define MX53_PAD_PATA_DATA7__EMI_NANDF_D_7 0x2c0 0x644 0x000 0x3 0x0 +#define MX53_PAD_PATA_DATA7__ESDHC4_DAT7 0x2c0 0x644 0x000 0x4 0x0 +#define MX53_PAD_PATA_DATA7__GPU3d_GPU_DEBUG_OUT_7 0x2c0 0x644 0x000 0x5 0x0 +#define MX53_PAD_PATA_DATA7__IPU_DIAG_BUS_7 0x2c0 0x644 0x000 0x6 0x0 +#define MX53_PAD_PATA_DATA8__PATA_DATA_8 0x2c4 0x648 0x000 0x0 0x0 +#define MX53_PAD_PATA_DATA8__GPIO2_8 0x2c4 0x648 0x000 0x1 0x0 +#define MX53_PAD_PATA_DATA8__ESDHC1_DAT4 0x2c4 0x648 0x000 0x2 0x0 +#define MX53_PAD_PATA_DATA8__EMI_NANDF_D_8 0x2c4 0x648 0x000 0x3 0x0 +#define MX53_PAD_PATA_DATA8__ESDHC3_DAT0 0x2c4 0x648 0x000 0x4 0x0 +#define MX53_PAD_PATA_DATA8__GPU3d_GPU_DEBUG_OUT_8 0x2c4 0x648 0x000 0x5 0x0 +#define MX53_PAD_PATA_DATA8__IPU_DIAG_BUS_8 0x2c4 0x648 0x000 0x6 0x0 +#define MX53_PAD_PATA_DATA9__PATA_DATA_9 0x2c8 0x64c 0x000 0x0 0x0 +#define MX53_PAD_PATA_DATA9__GPIO2_9 0x2c8 0x64c 0x000 0x1 0x0 +#define MX53_PAD_PATA_DATA9__ESDHC1_DAT5 0x2c8 0x64c 0x000 0x2 0x0 +#define MX53_PAD_PATA_DATA9__EMI_NANDF_D_9 0x2c8 0x64c 0x000 0x3 0x0 +#define MX53_PAD_PATA_DATA9__ESDHC3_DAT1 0x2c8 0x64c 0x000 0x4 0x0 +#define MX53_PAD_PATA_DATA9__GPU3d_GPU_DEBUG_OUT_9 0x2c8 0x64c 0x000 0x5 0x0 +#define MX53_PAD_PATA_DATA9__IPU_DIAG_BUS_9 0x2c8 0x64c 0x000 0x6 0x0 +#define MX53_PAD_PATA_DATA10__PATA_DATA_10 0x2cc 0x650 0x000 0x0 0x0 +#define MX53_PAD_PATA_DATA10__GPIO2_10 0x2cc 0x650 0x000 0x1 0x0 +#define MX53_PAD_PATA_DATA10__ESDHC1_DAT6 0x2cc 0x650 0x000 0x2 0x0 +#define MX53_PAD_PATA_DATA10__EMI_NANDF_D_10 0x2cc 0x650 0x000 0x3 0x0 +#define MX53_PAD_PATA_DATA10__ESDHC3_DAT2 0x2cc 0x650 0x000 0x4 0x0 +#define MX53_PAD_PATA_DATA10__GPU3d_GPU_DEBUG_OUT_10 0x2cc 0x650 0x000 0x5 0x0 +#define MX53_PAD_PATA_DATA10__IPU_DIAG_BUS_10 0x2cc 0x650 0x000 0x6 0x0 +#define MX53_PAD_PATA_DATA11__PATA_DATA_11 0x2d0 0x654 0x000 0x0 0x0 +#define MX53_PAD_PATA_DATA11__GPIO2_11 0x2d0 0x654 0x000 0x1 0x0 +#define MX53_PAD_PATA_DATA11__ESDHC1_DAT7 0x2d0 0x654 0x000 0x2 0x0 +#define MX53_PAD_PATA_DATA11__EMI_NANDF_D_11 0x2d0 0x654 0x000 0x3 0x0 +#define MX53_PAD_PATA_DATA11__ESDHC3_DAT3 0x2d0 0x654 0x000 0x4 0x0 +#define MX53_PAD_PATA_DATA11__GPU3d_GPU_DEBUG_OUT_11 0x2d0 0x654 0x000 0x5 0x0 +#define MX53_PAD_PATA_DATA11__IPU_DIAG_BUS_11 0x2d0 0x654 0x000 0x6 0x0 +#define MX53_PAD_PATA_DATA12__PATA_DATA_12 0x2d4 0x658 0x000 0x0 0x0 +#define MX53_PAD_PATA_DATA12__GPIO2_12 0x2d4 0x658 0x000 0x1 0x0 +#define MX53_PAD_PATA_DATA12__ESDHC2_DAT4 0x2d4 0x658 0x000 0x2 0x0 +#define MX53_PAD_PATA_DATA12__EMI_NANDF_D_12 0x2d4 0x658 0x000 0x3 0x0 +#define MX53_PAD_PATA_DATA12__ESDHC4_DAT0 0x2d4 0x658 0x000 0x4 0x0 +#define MX53_PAD_PATA_DATA12__GPU3d_GPU_DEBUG_OUT_12 0x2d4 0x658 0x000 0x5 0x0 +#define MX53_PAD_PATA_DATA12__IPU_DIAG_BUS_12 0x2d4 0x658 0x000 0x6 0x0 +#define MX53_PAD_PATA_DATA13__PATA_DATA_13 0x2d8 0x65c 0x000 0x0 0x0 +#define MX53_PAD_PATA_DATA13__GPIO2_13 0x2d8 0x65c 0x000 0x1 0x0 +#define MX53_PAD_PATA_DATA13__ESDHC2_DAT5 0x2d8 0x65c 0x000 0x2 0x0 +#define MX53_PAD_PATA_DATA13__EMI_NANDF_D_13 0x2d8 0x65c 0x000 0x3 0x0 +#define MX53_PAD_PATA_DATA13__ESDHC4_DAT1 0x2d8 0x65c 0x000 0x4 0x0 +#define MX53_PAD_PATA_DATA13__GPU3d_GPU_DEBUG_OUT_13 0x2d8 0x65c 0x000 0x5 0x0 +#define MX53_PAD_PATA_DATA13__IPU_DIAG_BUS_13 0x2d8 0x65c 0x000 0x6 0x0 +#define MX53_PAD_PATA_DATA14__PATA_DATA_14 0x2dc 0x660 0x000 0x0 0x0 +#define MX53_PAD_PATA_DATA14__GPIO2_14 0x2dc 0x660 0x000 0x1 0x0 +#define MX53_PAD_PATA_DATA14__ESDHC2_DAT6 0x2dc 0x660 0x000 0x2 0x0 +#define MX53_PAD_PATA_DATA14__EMI_NANDF_D_14 0x2dc 0x660 0x000 0x3 0x0 +#define MX53_PAD_PATA_DATA14__ESDHC4_DAT2 0x2dc 0x660 0x000 0x4 0x0 +#define MX53_PAD_PATA_DATA14__GPU3d_GPU_DEBUG_OUT_14 0x2dc 0x660 0x000 0x5 0x0 +#define MX53_PAD_PATA_DATA14__IPU_DIAG_BUS_14 0x2dc 0x660 0x000 0x6 0x0 +#define MX53_PAD_PATA_DATA15__PATA_DATA_15 0x2e0 0x664 0x000 0x0 0x0 +#define MX53_PAD_PATA_DATA15__GPIO2_15 0x2e0 0x664 0x000 0x1 0x0 +#define MX53_PAD_PATA_DATA15__ESDHC2_DAT7 0x2e0 0x664 0x000 0x2 0x0 +#define MX53_PAD_PATA_DATA15__EMI_NANDF_D_15 0x2e0 0x664 0x000 0x3 0x0 +#define MX53_PAD_PATA_DATA15__ESDHC4_DAT3 0x2e0 0x664 0x000 0x4 0x0 +#define MX53_PAD_PATA_DATA15__GPU3d_GPU_DEBUG_OUT_15 0x2e0 0x664 0x000 0x5 0x0 +#define MX53_PAD_PATA_DATA15__IPU_DIAG_BUS_15 0x2e0 0x664 0x000 0x6 0x0 +#define MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x2e4 0x66c 0x000 0x0 0x0 +#define MX53_PAD_SD1_DATA0__GPIO1_16 0x2e4 0x66c 0x000 0x1 0x0 +#define MX53_PAD_SD1_DATA0__GPT_CAPIN1 0x2e4 0x66c 0x000 0x3 0x0 +#define MX53_PAD_SD1_DATA0__CSPI_MISO 0x2e4 0x66c 0x784 0x5 0x2 +#define MX53_PAD_SD1_DATA0__CCM_PLL3_BYP 0x2e4 0x66c 0x778 0x7 0x0 +#define MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x2e8 0x670 0x000 0x0 0x0 +#define MX53_PAD_SD1_DATA1__GPIO1_17 0x2e8 0x670 0x000 0x1 0x0 +#define MX53_PAD_SD1_DATA1__GPT_CAPIN2 0x2e8 0x670 0x000 0x3 0x0 +#define MX53_PAD_SD1_DATA1__CSPI_SS0 0x2e8 0x670 0x78c 0x5 0x3 +#define MX53_PAD_SD1_DATA1__CCM_PLL4_BYP 0x2e8 0x670 0x77c 0x7 0x1 +#define MX53_PAD_SD1_CMD__ESDHC1_CMD 0x2ec 0x674 0x000 0x0 0x0 +#define MX53_PAD_SD1_CMD__GPIO1_18 0x2ec 0x674 0x000 0x1 0x0 +#define MX53_PAD_SD1_CMD__GPT_CMPOUT1 0x2ec 0x674 0x000 0x3 0x0 +#define MX53_PAD_SD1_CMD__CSPI_MOSI 0x2ec 0x674 0x788 0x5 0x2 +#define MX53_PAD_SD1_CMD__CCM_PLL1_BYP 0x2ec 0x674 0x770 0x7 0x0 +#define MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x2f0 0x678 0x000 0x0 0x0 +#define MX53_PAD_SD1_DATA2__GPIO1_19 0x2f0 0x678 0x000 0x1 0x0 +#define MX53_PAD_SD1_DATA2__GPT_CMPOUT2 0x2f0 0x678 0x000 0x2 0x0 +#define MX53_PAD_SD1_DATA2__PWM2_PWMO 0x2f0 0x678 0x000 0x3 0x0 +#define MX53_PAD_SD1_DATA2__WDOG1_WDOG_B 0x2f0 0x678 0x000 0x4 0x0 +#define MX53_PAD_SD1_DATA2__CSPI_SS1 0x2f0 0x678 0x790 0x5 0x2 +#define MX53_PAD_SD1_DATA2__WDOG1_WDOG_RST_B_DEB 0x2f0 0x678 0x000 0x6 0x0 +#define MX53_PAD_SD1_DATA2__CCM_PLL2_BYP 0x2f0 0x678 0x774 0x7 0x0 +#define MX53_PAD_SD1_CLK__ESDHC1_CLK 0x2f4 0x67c 0x000 0x0 0x0 +#define MX53_PAD_SD1_CLK__GPIO1_20 0x2f4 0x67c 0x000 0x1 0x0 +#define MX53_PAD_SD1_CLK__OSC32k_32K_OUT 0x2f4 0x67c 0x000 0x2 0x0 +#define MX53_PAD_SD1_CLK__GPT_CLKIN 0x2f4 0x67c 0x000 0x3 0x0 +#define MX53_PAD_SD1_CLK__CSPI_SCLK 0x2f4 0x67c 0x780 0x5 0x2 +#define MX53_PAD_SD1_CLK__SATA_PHY_DTB_0 0x2f4 0x67c 0x000 0x7 0x0 +#define MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x2f8 0x680 0x000 0x0 0x0 +#define MX53_PAD_SD1_DATA3__GPIO1_21 0x2f8 0x680 0x000 0x1 0x0 +#define MX53_PAD_SD1_DATA3__GPT_CMPOUT3 0x2f8 0x680 0x000 0x2 0x0 +#define MX53_PAD_SD1_DATA3__PWM1_PWMO 0x2f8 0x680 0x000 0x3 0x0 +#define MX53_PAD_SD1_DATA3__WDOG2_WDOG_B 0x2f8 0x680 0x000 0x4 0x0 +#define MX53_PAD_SD1_DATA3__CSPI_SS2 0x2f8 0x680 0x794 0x5 0x2 +#define MX53_PAD_SD1_DATA3__WDOG2_WDOG_RST_B_DEB 0x2f8 0x680 0x000 0x6 0x0 +#define MX53_PAD_SD1_DATA3__SATA_PHY_DTB_1 0x2f8 0x680 0x000 0x7 0x0 +#define MX53_PAD_SD2_CLK__ESDHC2_CLK 0x2fc 0x688 0x000 0x0 0x0 +#define MX53_PAD_SD2_CLK__GPIO1_10 0x2fc 0x688 0x000 0x1 0x0 +#define MX53_PAD_SD2_CLK__KPP_COL_5 0x2fc 0x688 0x840 0x2 0x2 +#define MX53_PAD_SD2_CLK__AUDMUX_AUD4_RXFS 0x2fc 0x688 0x73c 0x3 0x1 +#define MX53_PAD_SD2_CLK__CSPI_SCLK 0x2fc 0x688 0x780 0x5 0x3 +#define MX53_PAD_SD2_CLK__SCC_RANDOM_V 0x2fc 0x688 0x000 0x7 0x0 +#define MX53_PAD_SD2_CMD__ESDHC2_CMD 0x300 0x68c 0x000 0x0 0x0 +#define MX53_PAD_SD2_CMD__GPIO1_11 0x300 0x68c 0x000 0x1 0x0 +#define MX53_PAD_SD2_CMD__KPP_ROW_5 0x300 0x68c 0x84c 0x2 0x1 +#define MX53_PAD_SD2_CMD__AUDMUX_AUD4_RXC 0x300 0x68c 0x738 0x3 0x1 +#define MX53_PAD_SD2_CMD__CSPI_MOSI 0x300 0x68c 0x788 0x5 0x3 +#define MX53_PAD_SD2_CMD__SCC_RANDOM 0x300 0x68c 0x000 0x7 0x0 +#define MX53_PAD_SD2_DATA3__ESDHC2_DAT3 0x304 0x690 0x000 0x0 0x0 +#define MX53_PAD_SD2_DATA3__GPIO1_12 0x304 0x690 0x000 0x1 0x0 +#define MX53_PAD_SD2_DATA3__KPP_COL_6 0x304 0x690 0x844 0x2 0x1 +#define MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC 0x304 0x690 0x740 0x3 0x1 +#define MX53_PAD_SD2_DATA3__CSPI_SS2 0x304 0x690 0x794 0x5 0x3 +#define MX53_PAD_SD2_DATA3__SJC_DONE 0x304 0x690 0x000 0x7 0x0 +#define MX53_PAD_SD2_DATA2__ESDHC2_DAT2 0x308 0x694 0x000 0x0 0x0 +#define MX53_PAD_SD2_DATA2__GPIO1_13 0x308 0x694 0x000 0x1 0x0 +#define MX53_PAD_SD2_DATA2__KPP_ROW_6 0x308 0x694 0x850 0x2 0x1 +#define MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD 0x308 0x694 0x734 0x3 0x1 +#define MX53_PAD_SD2_DATA2__CSPI_SS1 0x308 0x694 0x790 0x5 0x3 +#define MX53_PAD_SD2_DATA2__SJC_FAIL 0x308 0x694 0x000 0x7 0x0 +#define MX53_PAD_SD2_DATA1__ESDHC2_DAT1 0x30c 0x698 0x000 0x0 0x0 +#define MX53_PAD_SD2_DATA1__GPIO1_14 0x30c 0x698 0x000 0x1 0x0 +#define MX53_PAD_SD2_DATA1__KPP_COL_7 0x30c 0x698 0x848 0x2 0x1 +#define MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS 0x30c 0x698 0x744 0x3 0x1 +#define MX53_PAD_SD2_DATA1__CSPI_SS0 0x30c 0x698 0x78c 0x5 0x4 +#define MX53_PAD_SD2_DATA1__RTIC_SEC_VIO 0x30c 0x698 0x000 0x7 0x0 +#define MX53_PAD_SD2_DATA0__ESDHC2_DAT0 0x310 0x69c 0x000 0x0 0x0 +#define MX53_PAD_SD2_DATA0__GPIO1_15 0x310 0x69c 0x000 0x1 0x0 +#define MX53_PAD_SD2_DATA0__KPP_ROW_7 0x310 0x69c 0x854 0x2 0x1 +#define MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD 0x310 0x69c 0x730 0x3 0x1 +#define MX53_PAD_SD2_DATA0__CSPI_MISO 0x310 0x69c 0x784 0x5 0x3 +#define MX53_PAD_SD2_DATA0__RTIC_DONE_INT 0x310 0x69c 0x000 0x7 0x0 +#define MX53_PAD_GPIO_0__CCM_CLKO 0x314 0x6a4 0x000 0x0 0x0 +#define MX53_PAD_GPIO_0__GPIO1_0 0x314 0x6a4 0x000 0x1 0x0 +#define MX53_PAD_GPIO_0__KPP_COL_5 0x314 0x6a4 0x840 0x2 0x3 +#define MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x314 0x6a4 0x000 0x3 0x0 +#define MX53_PAD_GPIO_0__EPIT1_EPITO 0x314 0x6a4 0x000 0x4 0x0 +#define MX53_PAD_GPIO_0__SRTC_ALARM_DEB 0x314 0x6a4 0x000 0x5 0x0 +#define MX53_PAD_GPIO_0__USBOH3_USBH1_PWR 0x314 0x6a4 0x000 0x6 0x0 +#define MX53_PAD_GPIO_0__CSU_TD 0x314 0x6a4 0x000 0x7 0x0 +#define MX53_PAD_GPIO_1__ESAI1_SCKR 0x318 0x6a8 0x7dc 0x0 0x1 +#define MX53_PAD_GPIO_1__GPIO1_1 0x318 0x6a8 0x000 0x1 0x0 +#define MX53_PAD_GPIO_1__KPP_ROW_5 0x318 0x6a8 0x84c 0x2 0x2 +#define MX53_PAD_GPIO_1__CCM_SSI_EXT2_CLK 0x318 0x6a8 0x000 0x3 0x0 +#define MX53_PAD_GPIO_1__PWM2_PWMO 0x318 0x6a8 0x000 0x4 0x0 +#define MX53_PAD_GPIO_1__WDOG2_WDOG_B 0x318 0x6a8 0x000 0x5 0x0 +#define MX53_PAD_GPIO_1__ESDHC1_CD 0x318 0x6a8 0x000 0x6 0x0 +#define MX53_PAD_GPIO_1__SRC_TESTER_ACK 0x318 0x6a8 0x000 0x7 0x0 +#define MX53_PAD_GPIO_9__ESAI1_FSR 0x31c 0x6ac 0x7cc 0x0 0x1 +#define MX53_PAD_GPIO_9__GPIO1_9 0x31c 0x6ac 0x000 0x1 0x0 +#define MX53_PAD_GPIO_9__KPP_COL_6 0x31c 0x6ac 0x844 0x2 0x2 +#define MX53_PAD_GPIO_9__CCM_REF_EN_B 0x31c 0x6ac 0x000 0x3 0x0 +#define MX53_PAD_GPIO_9__PWM1_PWMO 0x31c 0x6ac 0x000 0x4 0x0 +#define MX53_PAD_GPIO_9__WDOG1_WDOG_B 0x31c 0x6ac 0x000 0x5 0x0 +#define MX53_PAD_GPIO_9__ESDHC1_WP 0x31c 0x6ac 0x7fc 0x6 0x1 +#define MX53_PAD_GPIO_9__SCC_FAIL_STATE 0x31c 0x6ac 0x000 0x7 0x0 +#define MX53_PAD_GPIO_3__ESAI1_HCKR 0x320 0x6b0 0x7d4 0x0 0x1 +#define MX53_PAD_GPIO_3__GPIO1_3 0x320 0x6b0 0x000 0x1 0x0 +#define MX53_PAD_GPIO_3__I2C3_SCL 0x320 0x6b0 0x824 0x2 0x1 +#define MX53_PAD_GPIO_3__DPLLIP1_TOG_EN 0x320 0x6b0 0x000 0x3 0x0 +#define MX53_PAD_GPIO_3__CCM_CLKO2 0x320 0x6b0 0x000 0x4 0x0 +#define MX53_PAD_GPIO_3__OBSERVE_MUX_OBSRV_INT_OUT0 0x320 0x6b0 0x000 0x5 0x0 +#define MX53_PAD_GPIO_3__USBOH3_USBH1_OC 0x320 0x6b0 0x8a0 0x6 0x1 +#define MX53_PAD_GPIO_3__MLB_MLBCLK 0x320 0x6b0 0x858 0x7 0x2 +#define MX53_PAD_GPIO_6__ESAI1_SCKT 0x324 0x6b4 0x7e0 0x0 0x1 +#define MX53_PAD_GPIO_6__GPIO1_6 0x324 0x6b4 0x000 0x1 0x0 +#define MX53_PAD_GPIO_6__I2C3_SDA 0x324 0x6b4 0x828 0x2 0x1 +#define MX53_PAD_GPIO_6__CCM_CCM_OUT_0 0x324 0x6b4 0x000 0x3 0x0 +#define MX53_PAD_GPIO_6__CSU_CSU_INT_DEB 0x324 0x6b4 0x000 0x4 0x0 +#define MX53_PAD_GPIO_6__OBSERVE_MUX_OBSRV_INT_OUT1 0x324 0x6b4 0x000 0x5 0x0 +#define MX53_PAD_GPIO_6__ESDHC2_LCTL 0x324 0x6b4 0x000 0x6 0x0 +#define MX53_PAD_GPIO_6__MLB_MLBSIG 0x324 0x6b4 0x860 0x7 0x2 +#define MX53_PAD_GPIO_2__ESAI1_FST 0x328 0x6b8 0x7d0 0x0 0x1 +#define MX53_PAD_GPIO_2__GPIO1_2 0x328 0x6b8 0x000 0x1 0x0 +#define MX53_PAD_GPIO_2__KPP_ROW_6 0x328 0x6b8 0x850 0x2 0x2 +#define MX53_PAD_GPIO_2__CCM_CCM_OUT_1 0x328 0x6b8 0x000 0x3 0x0 +#define MX53_PAD_GPIO_2__CSU_CSU_ALARM_AUT_0 0x328 0x6b8 0x000 0x4 0x0 +#define MX53_PAD_GPIO_2__OBSERVE_MUX_OBSRV_INT_OUT2 0x328 0x6b8 0x000 0x5 0x0 +#define MX53_PAD_GPIO_2__ESDHC2_WP 0x328 0x6b8 0x000 0x6 0x0 +#define MX53_PAD_GPIO_2__MLB_MLBDAT 0x328 0x6b8 0x85c 0x7 0x2 +#define MX53_PAD_GPIO_4__ESAI1_HCKT 0x32c 0x6bc 0x7d8 0x0 0x1 +#define MX53_PAD_GPIO_4__GPIO1_4 0x32c 0x6bc 0x000 0x1 0x0 +#define MX53_PAD_GPIO_4__KPP_COL_7 0x32c 0x6bc 0x848 0x2 0x2 +#define MX53_PAD_GPIO_4__CCM_CCM_OUT_2 0x32c 0x6bc 0x000 0x3 0x0 +#define MX53_PAD_GPIO_4__CSU_CSU_ALARM_AUT_1 0x32c 0x6bc 0x000 0x4 0x0 +#define MX53_PAD_GPIO_4__OBSERVE_MUX_OBSRV_INT_OUT3 0x32c 0x6bc 0x000 0x5 0x0 +#define MX53_PAD_GPIO_4__ESDHC2_CD 0x32c 0x6bc 0x000 0x6 0x0 +#define MX53_PAD_GPIO_4__SCC_SEC_STATE 0x32c 0x6bc 0x000 0x7 0x0 +#define MX53_PAD_GPIO_5__ESAI1_TX2_RX3 0x330 0x6c0 0x7ec 0x0 0x1 +#define MX53_PAD_GPIO_5__GPIO1_5 0x330 0x6c0 0x000 0x1 0x0 +#define MX53_PAD_GPIO_5__KPP_ROW_7 0x330 0x6c0 0x854 0x2 0x2 +#define MX53_PAD_GPIO_5__CCM_CLKO 0x330 0x6c0 0x000 0x3 0x0 +#define MX53_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2 0x330 0x6c0 0x000 0x4 0x0 +#define MX53_PAD_GPIO_5__OBSERVE_MUX_OBSRV_INT_OUT4 0x330 0x6c0 0x000 0x5 0x0 +#define MX53_PAD_GPIO_5__I2C3_SCL 0x330 0x6c0 0x824 0x6 0x2 +#define MX53_PAD_GPIO_5__CCM_PLL1_BYP 0x330 0x6c0 0x770 0x7 0x1 +#define MX53_PAD_GPIO_7__ESAI1_TX4_RX1 0x334 0x6c4 0x7f4 0x0 0x1 +#define MX53_PAD_GPIO_7__GPIO1_7 0x334 0x6c4 0x000 0x1 0x0 +#define MX53_PAD_GPIO_7__EPIT1_EPITO 0x334 0x6c4 0x000 0x2 0x0 +#define MX53_PAD_GPIO_7__CAN1_TXCAN 0x334 0x6c4 0x000 0x3 0x0 +#define MX53_PAD_GPIO_7__UART2_TXD_MUX 0x334 0x6c4 0x000 0x4 0x0 +#define MX53_PAD_GPIO_7__FIRI_RXD 0x334 0x6c4 0x80c 0x5 0x1 +#define MX53_PAD_GPIO_7__SPDIF_PLOCK 0x334 0x6c4 0x000 0x6 0x0 +#define MX53_PAD_GPIO_7__CCM_PLL2_BYP 0x334 0x6c4 0x774 0x7 0x1 +#define MX53_PAD_GPIO_8__ESAI1_TX5_RX0 0x338 0x6c8 0x7f8 0x0 0x1 +#define MX53_PAD_GPIO_8__GPIO1_8 0x338 0x6c8 0x000 0x1 0x0 +#define MX53_PAD_GPIO_8__EPIT2_EPITO 0x338 0x6c8 0x000 0x2 0x0 +#define MX53_PAD_GPIO_8__CAN1_RXCAN 0x338 0x6c8 0x760 0x3 0x2 +#define MX53_PAD_GPIO_8__UART2_RXD_MUX 0x338 0x6c8 0x880 0x4 0x5 +#define MX53_PAD_GPIO_8__FIRI_TXD 0x338 0x6c8 0x000 0x5 0x0 +#define MX53_PAD_GPIO_8__SPDIF_SRCLK 0x338 0x6c8 0x000 0x6 0x0 +#define MX53_PAD_GPIO_8__CCM_PLL3_BYP 0x338 0x6c8 0x778 0x7 0x1 +#define MX53_PAD_GPIO_16__ESAI1_TX3_RX2 0x33c 0x6cc 0x7f0 0x0 0x1 +#define MX53_PAD_GPIO_16__GPIO7_11 0x33c 0x6cc 0x000 0x1 0x0 +#define MX53_PAD_GPIO_16__TZIC_PWRFAIL_INT 0x33c 0x6cc 0x000 0x2 0x0 +#define MX53_PAD_GPIO_16__RTC_CE_RTC_EXT_TRIG1 0x33c 0x6cc 0x000 0x4 0x0 +#define MX53_PAD_GPIO_16__SPDIF_IN1 0x33c 0x6cc 0x870 0x5 0x1 +#define MX53_PAD_GPIO_16__I2C3_SDA 0x33c 0x6cc 0x828 0x6 0x2 +#define MX53_PAD_GPIO_16__SJC_DE_B 0x33c 0x6cc 0x000 0x7 0x0 +#define MX53_PAD_GPIO_17__ESAI1_TX0 0x340 0x6d0 0x7e4 0x0 0x1 +#define MX53_PAD_GPIO_17__GPIO7_12 0x340 0x6d0 0x000 0x1 0x0 +#define MX53_PAD_GPIO_17__SDMA_EXT_EVENT_0 0x340 0x6d0 0x868 0x2 0x1 +#define MX53_PAD_GPIO_17__GPC_PMIC_RDY 0x340 0x6d0 0x810 0x3 0x1 +#define MX53_PAD_GPIO_17__RTC_CE_RTC_FSV_TRIG 0x340 0x6d0 0x000 0x4 0x0 +#define MX53_PAD_GPIO_17__SPDIF_OUT1 0x340 0x6d0 0x000 0x5 0x0 +#define MX53_PAD_GPIO_17__IPU_SNOOP2 0x340 0x6d0 0x000 0x6 0x0 +#define MX53_PAD_GPIO_17__SJC_JTAG_ACT 0x340 0x6d0 0x000 0x7 0x0 +#define MX53_PAD_GPIO_18__ESAI1_TX1 0x344 0x6d4 0x7e8 0x0 0x1 +#define MX53_PAD_GPIO_18__GPIO7_13 0x344 0x6d4 0x000 0x1 0x0 +#define MX53_PAD_GPIO_18__SDMA_EXT_EVENT_1 0x344 0x6d4 0x86c 0x2 0x1 +#define MX53_PAD_GPIO_18__OWIRE_LINE 0x344 0x6d4 0x864 0x3 0x1 +#define MX53_PAD_GPIO_18__RTC_CE_RTC_ALARM2_TRIG 0x344 0x6d4 0x000 0x4 0x0 +#define MX53_PAD_GPIO_18__CCM_ASRC_EXT_CLK 0x344 0x6d4 0x768 0x5 0x1 +#define MX53_PAD_GPIO_18__ESDHC1_LCTL 0x344 0x6d4 0x000 0x6 0x0 +#define MX53_PAD_GPIO_18__SRC_SYSTEM_RST 0x344 0x6d4 0x000 0x7 0x0 + +#endif /* __DTS_IMX53_PINFUNC_H */ diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts index 05cc5620436b..8f0e9ae0e3e6 100644 --- a/arch/arm/boot/dts/imx53-qsb.dts +++ b/arch/arm/boot/dts/imx53-qsb.dts @@ -11,7 +11,7 @@ */ /dts-v1/; -/include/ "imx53.dtsi" +#include "imx53.dtsi" / { model = "Freescale i.MX53 Quick Start Board"; @@ -110,21 +110,21 @@ hog { pinctrl_hog: hoggrp { fsl,pins = < - 1071 0x80000000 /* MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK */ - 1141 0x80000000 /* MX53_PAD_GPIO_8__GPIO1_8 */ - 982 0x80000000 /* MX53_PAD_PATA_DATA14__GPIO2_14 */ - 989 0x80000000 /* MX53_PAD_PATA_DATA15__GPIO2_15 */ - 693 0x80000000 /* MX53_PAD_EIM_DA11__GPIO3_11 */ - 697 0x80000000 /* MX53_PAD_EIM_DA12__GPIO3_12 */ - 701 0x80000000 /* MX53_PAD_EIM_DA13__GPIO3_13 */ - 868 0x80000000 /* MX53_PAD_PATA_DA_0__GPIO7_6 */ - 1149 0x80000000 /* MX53_PAD_GPIO_16__GPIO7_11 */ + MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000 + MX53_PAD_GPIO_8__GPIO1_8 0x80000000 + MX53_PAD_PATA_DATA14__GPIO2_14 0x80000000 + MX53_PAD_PATA_DATA15__GPIO2_15 0x80000000 + MX53_PAD_EIM_DA11__GPIO3_11 0x80000000 + MX53_PAD_EIM_DA12__GPIO3_12 0x80000000 + MX53_PAD_EIM_DA13__GPIO3_13 0x80000000 + MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000 + MX53_PAD_GPIO_16__GPIO7_11 0x80000000 >; }; led_pin_gpio7_7: led_gpio7_7@0 { fsl,pins = < - 873 0x80000000 /* MX53_PAD_PATA_DA_1__GPIO7_7 */ + MX53_PAD_PATA_DA_1__GPIO7_7 0x80000000 >; }; }; diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts index 995554c324b8..a9b6e10de0a5 100644 --- a/arch/arm/boot/dts/imx53-smd.dts +++ b/arch/arm/boot/dts/imx53-smd.dts @@ -11,7 +11,7 @@ */ /dts-v1/; -/include/ "imx53.dtsi" +#include "imx53.dtsi" / { model = "Freescale i.MX53 Smart Mobile Reference Design Board"; @@ -107,13 +107,13 @@ hog { pinctrl_hog: hoggrp { fsl,pins = < - 982 0x80000000 /* MX53_PAD_PATA_DATA14__GPIO2_14 */ - 989 0x80000000 /* MX53_PAD_PATA_DATA15__GPIO2_15 */ - 424 0x80000000 /* MX53_PAD_EIM_EB2__GPIO2_30 */ - 701 0x80000000 /* MX53_PAD_EIM_DA13__GPIO3_13 */ - 449 0x80000000 /* MX53_PAD_EIM_D19__GPIO3_19 */ - 43 0x80000000 /* MX53_PAD_KEY_ROW2__GPIO4_11 */ - 868 0x80000000 /* MX53_PAD_PATA_DA_0__GPIO7_6 */ + MX53_PAD_PATA_DATA14__GPIO2_14 0x80000000 + MX53_PAD_PATA_DATA15__GPIO2_15 0x80000000 + MX53_PAD_EIM_EB2__GPIO2_30 0x80000000 + MX53_PAD_EIM_DA13__GPIO3_13 0x80000000 + MX53_PAD_EIM_D19__GPIO3_19 0x80000000 + MX53_PAD_KEY_ROW2__GPIO4_11 0x80000000 + MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000 >; }; }; diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi b/arch/arm/boot/dts/imx53-tqma53.dtsi index 8278ec5ec222..38bed3ed7c1a 100644 --- a/arch/arm/boot/dts/imx53-tqma53.dtsi +++ b/arch/arm/boot/dts/imx53-tqma53.dtsi @@ -10,7 +10,7 @@ * http://www.gnu.org/copyleft/gpl.html */ -/include/ "imx53.dtsi" +#include "imx53.dtsi" / { model = "TQ TQMa53"; @@ -72,11 +72,11 @@ i2s { pinctrl_i2s_1: i2s-grp1 { fsl,pins = < - 1 0x10000 /* I2S_MCLK */ - 10 0x10000 /* I2S_SCLK */ - 17 0x10000 /* I2S_DOUT */ - 23 0x10000 /* I2S_LRCLK*/ - 30 0x10000 /* I2S_DIN */ + MX53_PAD_GPIO_19__GPIO4_5 0x10000 /* I2S_MCLK */ + MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC 0x10000 /* I2S_SCLK */ + MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x10000 /* I2S_DOUT */ + MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 0x10000 /* I2S_LRCLK */ + MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD 0x10000 /* I2S_DIN */ >; }; }; @@ -84,16 +84,16 @@ hog { pinctrl_hog: hoggrp { fsl,pins = < - 610 0x10000 /* MX53_PAD_EIM_CS1__IPU_DI1_PIN6 (VSYNC)*/ - 711 0x10000 /* MX53_PAD_EIM_DA15__IPU_DI1_PIN4 (HSYNC)*/ - 873 0x10000 /* MX53_PAD_PATA_DA_1__GPIO7_7 (LCD_BLT_EN)*/ - 878 0x10000 /* MX53_PAD_PATA_DA_2__GPIO7_8 (LCD_RESET)*/ - 922 0x10000 /* MX53_PAD_PATA_DATA5__GPIO2_5 (LCD_POWER)*/ - 928 0x10000 /* MX53_PAD_PATA_DATA6__GPIO2_6 (PMIC_INT)*/ - 982 0x10000 /* MX53_PAD_PATA_DATA14__GPIO2_14 (CSI_RST)*/ - 989 0x10000 /* MX53_PAD_PATA_DATA15__GPIO2_15 (CSI_PWDN)*/ - 1069 0x10000 /* MX53_PAD_GPIO_0__GPIO1_0 (SYSTEM_DOWN)*/ - 1093 0x10000 /* MX53_PAD_GPIO_3__GPIO1_3 */ + MX53_PAD_EIM_CS1__IPU_DI1_PIN6 0x10000 /* VSYNC */ + MX53_PAD_EIM_DA15__IPU_DI1_PIN4 0x10000 /* HSYNC */ + MX53_PAD_PATA_DA_1__GPIO7_7 0x10000 /* LCD_BLT_EN */ + MX53_PAD_PATA_DA_2__GPIO7_8 0x10000 /* LCD_RESET */ + MX53_PAD_PATA_DATA5__GPIO2_5 0x10000 /* LCD_POWER */ + MX53_PAD_PATA_DATA6__GPIO2_6 0x10000 /* PMIC_INT */ + MX53_PAD_PATA_DATA14__GPIO2_14 0x10000 /* CSI_RST */ + MX53_PAD_PATA_DATA15__GPIO2_15 0x10000 /* CSI_PWDN */ + MX53_PAD_GPIO_0__GPIO1_0 0x10000 /* SYSTEM_DOWN */ + MX53_PAD_GPIO_3__GPIO1_3 0x10000 >; }; }; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index d05aa215c7f9..845982eaac22 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -10,7 +10,8 @@ * http://www.gnu.org/copyleft/gpl.html */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" +#include "imx53-pinfunc.h" / { aliases { @@ -72,6 +73,9 @@ compatible = "fsl,imx53-ipu"; reg = <0x18000000 0x080000000>; interrupts = <11 10>; + clocks = <&clks 59>, <&clks 110>, <&clks 61>; + clock-names = "bus", "di0", "di1"; + resets = <&src 2>; }; aips@50000000 { /* AIPS1 */ @@ -242,6 +246,14 @@ status = "disabled"; }; + gpt: timer@53fa0000 { + compatible = "fsl,imx53-gpt", "fsl,imx31-gpt"; + reg = <0x53fa0000 0x4000>; + interrupts = <39>; + clocks = <&clks 36>, <&clks 41>; + clock-names = "ipg", "per"; + }; + iomuxc: iomuxc@53fa8000 { compatible = "fsl,imx53-iomuxc"; reg = <0x53fa8000 0x4000>; @@ -249,10 +261,10 @@ audmux { pinctrl_audmux_1: audmuxgrp-1 { fsl,pins = < - 10 0x80000000 /* MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC */ - 17 0x80000000 /* MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD */ - 23 0x80000000 /* MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS */ - 30 0x80000000 /* MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD */ + MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC 0x80000000 + MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x80000000 + MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 0x80000000 + MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD 0x80000000 >; }; }; @@ -260,16 +272,16 @@ fec { pinctrl_fec_1: fecgrp-1 { fsl,pins = < - 820 0x80000000 /* MX53_PAD_FEC_MDC__FEC_MDC */ - 779 0x80000000 /* MX53_PAD_FEC_MDIO__FEC_MDIO */ - 786 0x80000000 /* MX53_PAD_FEC_REF_CLK__FEC_TX_CLK */ - 791 0x80000000 /* MX53_PAD_FEC_RX_ER__FEC_RX_ER */ - 796 0x80000000 /* MX53_PAD_FEC_CRS_DV__FEC_RX_DV */ - 799 0x80000000 /* MX53_PAD_FEC_RXD1__FEC_RDATA_1 */ - 804 0x80000000 /* MX53_PAD_FEC_RXD0__FEC_RDATA_0 */ - 808 0x80000000 /* MX53_PAD_FEC_TX_EN__FEC_TX_EN */ - 811 0x80000000 /* MX53_PAD_FEC_TXD1__FEC_TDATA_1 */ - 816 0x80000000 /* MX53_PAD_FEC_TXD0__FEC_TDATA_0 */ + MX53_PAD_FEC_MDC__FEC_MDC 0x80000000 + MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000 + MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000 + MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000 + MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000 + MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000 + MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000 + MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000 + MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000 + MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000 >; }; }; @@ -277,27 +289,27 @@ csi { pinctrl_csi_1: csigrp-1 { fsl,pins = < - 286 0x1d5 /* MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN */ - 291 0x1d5 /* MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC */ - 280 0x1d5 /* MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC */ - 276 0x1d5 /* MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK */ - 409 0x1d5 /* MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19 */ - 402 0x1d5 /* MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18 */ - 395 0x1d5 /* MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17 */ - 388 0x1d5 /* MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16 */ - 381 0x1d5 /* MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15 */ - 374 0x1d5 /* MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14 */ - 367 0x1d5 /* MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13 */ - 360 0x1d5 /* MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12 */ - 352 0x1d5 /* MX53_PAD_CSI0_DAT11__IPU_CSI0_D_11 */ - 344 0x1d5 /* MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10 */ - 336 0x1d5 /* MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9 */ - 328 0x1d5 /* MX53_PAD_CSI0_DAT8__IPU_CSI0_D_8 */ - 320 0x1d5 /* MX53_PAD_CSI0_DAT7__IPU_CSI0_D_7 */ - 312 0x1d5 /* MX53_PAD_CSI0_DAT6__IPU_CSI0_D_6 */ - 304 0x1d5 /* MX53_PAD_CSI0_DAT5__IPU_CSI0_D_5 */ - 296 0x1d5 /* MX53_PAD_CSI0_DAT4__IPU_CSI0_D_4 */ - 276 0x1d5 /* MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK */ + MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN 0x1d5 + MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC 0x1d5 + MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC 0x1d5 + MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK 0x1d5 + MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19 0x1d5 + MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18 0x1d5 + MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17 0x1d5 + MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16 0x1d5 + MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15 0x1d5 + MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14 0x1d5 + MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13 0x1d5 + MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12 0x1d5 + MX53_PAD_CSI0_DAT11__IPU_CSI0_D_11 0x1d5 + MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10 0x1d5 + MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9 0x1d5 + MX53_PAD_CSI0_DAT8__IPU_CSI0_D_8 0x1d5 + MX53_PAD_CSI0_DAT7__IPU_CSI0_D_7 0x1d5 + MX53_PAD_CSI0_DAT6__IPU_CSI0_D_6 0x1d5 + MX53_PAD_CSI0_DAT5__IPU_CSI0_D_5 0x1d5 + MX53_PAD_CSI0_DAT4__IPU_CSI0_D_4 0x1d5 + MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK 0x1d5 >; }; }; @@ -305,9 +317,9 @@ cspi { pinctrl_cspi_1: cspigrp-1 { fsl,pins = < - 998 0x1d5 /* MX53_PAD_SD1_DATA0__CSPI_MISO */ - 1008 0x1d5 /* MX53_PAD_SD1_CMD__CSPI_MOSI */ - 1022 0x1d5 /* MX53_PAD_SD1_CLK__CSPI_SCLK */ + MX53_PAD_SD1_DATA0__CSPI_MISO 0x1d5 + MX53_PAD_SD1_CMD__CSPI_MOSI 0x1d5 + MX53_PAD_SD1_CLK__CSPI_SCLK 0x1d5 >; }; }; @@ -315,9 +327,9 @@ ecspi1 { pinctrl_ecspi1_1: ecspi1grp-1 { fsl,pins = < - 433 0x80000000 /* MX53_PAD_EIM_D16__ECSPI1_SCLK */ - 439 0x80000000 /* MX53_PAD_EIM_D17__ECSPI1_MISO */ - 445 0x80000000 /* MX53_PAD_EIM_D18__ECSPI1_MOSI */ + MX53_PAD_EIM_D16__ECSPI1_SCLK 0x80000000 + MX53_PAD_EIM_D17__ECSPI1_MISO 0x80000000 + MX53_PAD_EIM_D18__ECSPI1_MOSI 0x80000000 >; }; }; @@ -325,27 +337,27 @@ esdhc1 { pinctrl_esdhc1_1: esdhc1grp-1 { fsl,pins = < - 995 0x1d5 /* MX53_PAD_SD1_DATA0__ESDHC1_DAT0 */ - 1000 0x1d5 /* MX53_PAD_SD1_DATA1__ESDHC1_DAT1 */ - 1010 0x1d5 /* MX53_PAD_SD1_DATA2__ESDHC1_DAT2 */ - 1024 0x1d5 /* MX53_PAD_SD1_DATA3__ESDHC1_DAT3 */ - 1005 0x1d5 /* MX53_PAD_SD1_CMD__ESDHC1_CMD */ - 1018 0x1d5 /* MX53_PAD_SD1_CLK__ESDHC1_CLK */ + MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5 + MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5 + MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5 + MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5 + MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5 + MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5 >; }; pinctrl_esdhc1_2: esdhc1grp-2 { fsl,pins = < - 995 0x1d5 /* MX53_PAD_SD1_DATA0__ESDHC1_DAT0 */ - 1000 0x1d5 /* MX53_PAD_SD1_DATA1__ESDHC1_DAT1 */ - 1010 0x1d5 /* MX53_PAD_SD1_DATA2__ESDHC1_DAT2 */ - 1024 0x1d5 /* MX53_PAD_SD1_DATA3__ESDHC1_DAT3 */ - 941 0x1d5 /* MX53_PAD_PATA_DATA8__ESDHC1_DAT4 */ - 948 0x1d5 /* MX53_PAD_PATA_DATA9__ESDHC1_DAT5 */ - 955 0x1d5 /* MX53_PAD_PATA_DATA10__ESDHC1_DAT6 */ - 962 0x1d5 /* MX53_PAD_PATA_DATA11__ESDHC1_DAT7 */ - 1005 0x1d5 /* MX53_PAD_SD1_CMD__ESDHC1_CMD */ - 1018 0x1d5 /* MX53_PAD_SD1_CLK__ESDHC1_CLK */ + MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5 + MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5 + MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5 + MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5 + MX53_PAD_PATA_DATA8__ESDHC1_DAT4 0x1d5 + MX53_PAD_PATA_DATA9__ESDHC1_DAT5 0x1d5 + MX53_PAD_PATA_DATA10__ESDHC1_DAT6 0x1d5 + MX53_PAD_PATA_DATA11__ESDHC1_DAT7 0x1d5 + MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5 + MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5 >; }; }; @@ -353,12 +365,12 @@ esdhc2 { pinctrl_esdhc2_1: esdhc2grp-1 { fsl,pins = < - 1038 0x1d5 /* MX53_PAD_SD2_CMD__ESDHC2_CMD */ - 1032 0x1d5 /* MX53_PAD_SD2_CLK__ESDHC2_CLK */ - 1062 0x1d5 /* MX53_PAD_SD2_DATA0__ESDHC2_DAT0 */ - 1056 0x1d5 /* MX53_PAD_SD2_DATA1__ESDHC2_DAT1 */ - 1050 0x1d5 /* MX53_PAD_SD2_DATA2__ESDHC2_DAT2 */ - 1044 0x1d5 /* MX53_PAD_SD2_DATA3__ESDHC2_DAT3 */ + MX53_PAD_SD2_CMD__ESDHC2_CMD 0x1d5 + MX53_PAD_SD2_CLK__ESDHC2_CLK 0x1d5 + MX53_PAD_SD2_DATA0__ESDHC2_DAT0 0x1d5 + MX53_PAD_SD2_DATA1__ESDHC2_DAT1 0x1d5 + MX53_PAD_SD2_DATA2__ESDHC2_DAT2 0x1d5 + MX53_PAD_SD2_DATA3__ESDHC2_DAT3 0x1d5 >; }; }; @@ -366,16 +378,16 @@ esdhc3 { pinctrl_esdhc3_1: esdhc3grp-1 { fsl,pins = < - 943 0x1d5 /* MX53_PAD_PATA_DATA8__ESDHC3_DAT0 */ - 950 0x1d5 /* MX53_PAD_PATA_DATA9__ESDHC3_DAT1 */ - 957 0x1d5 /* MX53_PAD_PATA_DATA10__ESDHC3_DAT2 */ - 964 0x1d5 /* MX53_PAD_PATA_DATA11__ESDHC3_DAT3 */ - 893 0x1d5 /* MX53_PAD_PATA_DATA0__ESDHC3_DAT4 */ - 900 0x1d5 /* MX53_PAD_PATA_DATA1__ESDHC3_DAT5 */ - 906 0x1d5 /* MX53_PAD_PATA_DATA2__ESDHC3_DAT6 */ - 912 0x1d5 /* MX53_PAD_PATA_DATA3__ESDHC3_DAT7 */ - 857 0x1d5 /* MX53_PAD_PATA_RESET_B__ESDHC3_CMD */ - 863 0x1d5 /* MX53_PAD_PATA_IORDY__ESDHC3_CLK */ + MX53_PAD_PATA_DATA8__ESDHC3_DAT0 0x1d5 + MX53_PAD_PATA_DATA9__ESDHC3_DAT1 0x1d5 + MX53_PAD_PATA_DATA10__ESDHC3_DAT2 0x1d5 + MX53_PAD_PATA_DATA11__ESDHC3_DAT3 0x1d5 + MX53_PAD_PATA_DATA0__ESDHC3_DAT4 0x1d5 + MX53_PAD_PATA_DATA1__ESDHC3_DAT5 0x1d5 + MX53_PAD_PATA_DATA2__ESDHC3_DAT6 0x1d5 + MX53_PAD_PATA_DATA3__ESDHC3_DAT7 0x1d5 + MX53_PAD_PATA_RESET_B__ESDHC3_CMD 0x1d5 + MX53_PAD_PATA_IORDY__ESDHC3_CLK 0x1d5 >; }; }; @@ -383,15 +395,15 @@ can1 { pinctrl_can1_1: can1grp-1 { fsl,pins = < - 847 0x80000000 /* MX53_PAD_PATA_INTRQ__CAN1_TXCAN */ - 853 0x80000000 /* MX53_PAD_PATA_DIOR__CAN1_RXCAN */ + MX53_PAD_PATA_INTRQ__CAN1_TXCAN 0x80000000 + MX53_PAD_PATA_DIOR__CAN1_RXCAN 0x80000000 >; }; pinctrl_can1_2: can1grp-2 { fsl,pins = < - 37 0x80000000 /* MX53_PAD_KEY_COL2__CAN1_TXCAN */ - 44 0x80000000 /* MX53_PAD_KEY_ROW2__CAN1_RXCAN */ + MX53_PAD_KEY_COL2__CAN1_TXCAN 0x80000000 + MX53_PAD_KEY_ROW2__CAN1_RXCAN 0x80000000 >; }; }; @@ -399,8 +411,8 @@ can2 { pinctrl_can2_1: can2grp-1 { fsl,pins = < - 67 0x80000000 /* MX53_PAD_KEY_COL4__CAN2_TXCAN */ - 74 0x80000000 /* MX53_PAD_KEY_ROW4__CAN2_RXCAN */ + MX53_PAD_KEY_COL4__CAN2_TXCAN 0x80000000 + MX53_PAD_KEY_ROW4__CAN2_RXCAN 0x80000000 >; }; }; @@ -408,8 +420,8 @@ i2c1 { pinctrl_i2c1_1: i2c1grp-1 { fsl,pins = < - 333 0xc0000000 /* MX53_PAD_CSI0_DAT8__I2C1_SDA */ - 341 0xc0000000 /* MX53_PAD_CSI0_DAT9__I2C1_SCL */ + MX53_PAD_CSI0_DAT8__I2C1_SDA 0xc0000000 + MX53_PAD_CSI0_DAT9__I2C1_SCL 0xc0000000 >; }; }; @@ -417,8 +429,8 @@ i2c2 { pinctrl_i2c2_1: i2c2grp-1 { fsl,pins = < - 61 0xc0000000 /* MX53_PAD_KEY_ROW3__I2C2_SDA */ - 53 0xc0000000 /* MX53_PAD_KEY_COL3__I2C2_SCL */ + MX53_PAD_KEY_ROW3__I2C2_SDA 0xc0000000 + MX53_PAD_KEY_COL3__I2C2_SCL 0xc0000000 >; }; }; @@ -426,8 +438,8 @@ i2c3 { pinctrl_i2c3_1: i2c3grp-1 { fsl,pins = < - 1102 0xc0000000 /* MX53_PAD_GPIO_6__I2C3_SDA */ - 1130 0xc0000000 /* MX53_PAD_GPIO_5__I2C3_SCL */ + MX53_PAD_GPIO_6__I2C3_SDA 0xc0000000 + MX53_PAD_GPIO_5__I2C3_SCL 0xc0000000 >; }; }; @@ -435,7 +447,7 @@ owire { pinctrl_owire_1: owiregrp-1 { fsl,pins = < - 1166 0x80000000 /* MX53_PAD_GPIO_18__OWIRE_LINE */ + MX53_PAD_GPIO_18__OWIRE_LINE 0x80000000 >; }; }; @@ -443,15 +455,15 @@ uart1 { pinctrl_uart1_1: uart1grp-1 { fsl,pins = < - 346 0x1c5 /* MX53_PAD_CSI0_DAT10__UART1_TXD_MUX */ - 354 0x1c5 /* MX53_PAD_CSI0_DAT11__UART1_RXD_MUX */ + MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 0x1c5 + MX53_PAD_CSI0_DAT11__UART1_RXD_MUX 0x1c5 >; }; pinctrl_uart1_2: uart1grp-2 { fsl,pins = < - 828 0x1c5 /* MX53_PAD_PATA_DIOW__UART1_TXD_MUX */ - 832 0x1c5 /* MX53_PAD_PATA_DMACK__UART1_RXD_MUX */ + MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1c5 + MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1c5 >; }; }; @@ -459,8 +471,8 @@ uart2 { pinctrl_uart2_1: uart2grp-1 { fsl,pins = < - 841 0x1c5 /* MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX */ - 836 0x1c5 /* MX53_PAD_PATA_DMARQ__UART2_TXD_MUX */ + MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1c5 + MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1c5 >; }; }; @@ -468,17 +480,17 @@ uart3 { pinctrl_uart3_1: uart3grp-1 { fsl,pins = < - 884 0x1c5 /* MX53_PAD_PATA_CS_0__UART3_TXD_MUX */ - 888 0x1c5 /* MX53_PAD_PATA_CS_1__UART3_RXD_MUX */ - 875 0x1c5 /* MX53_PAD_PATA_DA_1__UART3_CTS */ - 880 0x1c5 /* MX53_PAD_PATA_DA_2__UART3_RTS */ + MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1c5 + MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1c5 + MX53_PAD_PATA_DA_1__UART3_CTS 0x1c5 + MX53_PAD_PATA_DA_2__UART3_RTS 0x1c5 >; }; pinctrl_uart3_2: uart3grp-2 { fsl,pins = < - 884 0x1c5 /* MX53_PAD_PATA_CS_0__UART3_TXD_MUX */ - 888 0x1c5 /* MX53_PAD_PATA_CS_1__UART3_RXD_MUX */ + MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1c5 + MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1c5 >; }; @@ -487,8 +499,8 @@ uart4 { pinctrl_uart4_1: uart4grp-1 { fsl,pins = < - 11 0x1c5 /* MX53_PAD_KEY_COL0__UART4_TXD_MUX */ - 18 0x1c5 /* MX53_PAD_KEY_ROW0__UART4_RXD_MUX */ + MX53_PAD_KEY_COL0__UART4_TXD_MUX 0x1c5 + MX53_PAD_KEY_ROW0__UART4_RXD_MUX 0x1c5 >; }; }; @@ -496,14 +508,46 @@ uart5 { pinctrl_uart5_1: uart5grp-1 { fsl,pins = < - 24 0x1c5 /* MX53_PAD_KEY_COL1__UART5_TXD_MUX */ - 31 0x1c5 /* MX53_PAD_KEY_ROW1__UART5_RXD_MUX */ + MX53_PAD_KEY_COL1__UART5_TXD_MUX 0x1c5 + MX53_PAD_KEY_ROW1__UART5_RXD_MUX 0x1c5 >; }; }; }; + gpr: iomuxc-gpr@53fa8000 { + compatible = "fsl,imx53-iomuxc-gpr", "syscon"; + reg = <0x53fa8000 0xc>; + }; + + ldb: ldb@53fa8008 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx53-ldb"; + reg = <0x53fa8008 0x4>; + gpr = <&gpr>; + clocks = <&clks 122>, <&clks 120>, + <&clks 115>, <&clks 116>, + <&clks 123>, <&clks 85>; + clock-names = "di0_pll", "di1_pll", + "di0_sel", "di1_sel", + "di0", "di1"; + status = "disabled"; + + lvds-channel@0 { + reg = <0>; + crtcs = <&ipu 0>; + status = "disabled"; + }; + + lvds-channel@1 { + reg = <1>; + crtcs = <&ipu 1>; + status = "disabled"; + }; + }; + pwm1: pwm@53fb4000 { #pwm-cells = <2>; compatible = "fsl,imx53-pwm", "fsl,imx27-pwm"; @@ -558,6 +602,12 @@ status = "disabled"; }; + src: src@53fd0000 { + compatible = "fsl,imx53-src", "fsl,imx51-src"; + reg = <0x53fd0000 0x4000>; + #reset-cells = <1>; + }; + clks: ccm@53fd4000{ compatible = "fsl,imx53-ccm"; reg = <0x53fd4000 0x4000>; diff --git a/arch/arm/boot/dts/imx6dl-pinfunc.h b/arch/arm/boot/dts/imx6dl-pinfunc.h new file mode 100644 index 000000000000..9aab950ec269 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-pinfunc.h @@ -0,0 +1,1085 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __DTS_IMX6DL_PINFUNC_H +#define __DTS_IMX6DL_PINFUNC_H + +/* + * The pin function ID is a tuple of + * <mux_reg conf_reg input_reg mux_mode input_val> + */ +#define MX6DL_PAD_CSI0_DAT10__IPU1_CSI0_DATA10 0x04c 0x360 0x000 0x0 0x0 +#define MX6DL_PAD_CSI0_DAT10__AUD3_RXC 0x04c 0x360 0x000 0x1 0x0 +#define MX6DL_PAD_CSI0_DAT10__ECSPI2_MISO 0x04c 0x360 0x7f8 0x2 0x0 +#define MX6DL_PAD_CSI0_DAT10__UART1_TX_DATA 0x04c 0x360 0x000 0x3 0x0 +#define MX6DL_PAD_CSI0_DAT10__UART1_RX_DATA 0x04c 0x360 0x8fc 0x3 0x0 +#define MX6DL_PAD_CSI0_DAT10__GPIO5_IO28 0x04c 0x360 0x000 0x5 0x0 +#define MX6DL_PAD_CSI0_DAT10__ARM_TRACE07 0x04c 0x360 0x000 0x7 0x0 +#define MX6DL_PAD_CSI0_DAT11__IPU1_CSI0_DATA11 0x050 0x364 0x000 0x0 0x0 +#define MX6DL_PAD_CSI0_DAT11__AUD3_RXFS 0x050 0x364 0x000 0x1 0x0 +#define MX6DL_PAD_CSI0_DAT11__ECSPI2_SS0 0x050 0x364 0x800 0x2 0x0 +#define MX6DL_PAD_CSI0_DAT11__UART1_RX_DATA 0x050 0x364 0x8fc 0x3 0x1 +#define MX6DL_PAD_CSI0_DAT11__UART1_TX_DATA 0x050 0x364 0x000 0x3 0x0 +#define MX6DL_PAD_CSI0_DAT11__GPIO5_IO29 0x050 0x364 0x000 0x5 0x0 +#define MX6DL_PAD_CSI0_DAT11__ARM_TRACE08 0x050 0x364 0x000 0x7 0x0 +#define MX6DL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x054 0x368 0x000 0x0 0x0 +#define MX6DL_PAD_CSI0_DAT12__EIM_DATA08 0x054 0x368 0x000 0x1 0x0 +#define MX6DL_PAD_CSI0_DAT12__UART4_TX_DATA 0x054 0x368 0x000 0x3 0x0 +#define MX6DL_PAD_CSI0_DAT12__UART4_RX_DATA 0x054 0x368 0x914 0x3 0x0 +#define MX6DL_PAD_CSI0_DAT12__GPIO5_IO30 0x054 0x368 0x000 0x5 0x0 +#define MX6DL_PAD_CSI0_DAT12__ARM_TRACE09 0x054 0x368 0x000 0x7 0x0 +#define MX6DL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x058 0x36c 0x000 0x0 0x0 +#define MX6DL_PAD_CSI0_DAT13__EIM_DATA09 0x058 0x36c 0x000 0x1 0x0 +#define MX6DL_PAD_CSI0_DAT13__UART4_RX_DATA 0x058 0x36c 0x914 0x3 0x1 +#define MX6DL_PAD_CSI0_DAT13__UART4_TX_DATA 0x058 0x36c 0x000 0x3 0x0 +#define MX6DL_PAD_CSI0_DAT13__GPIO5_IO31 0x058 0x36c 0x000 0x5 0x0 +#define MX6DL_PAD_CSI0_DAT13__ARM_TRACE10 0x058 0x36c 0x000 0x7 0x0 +#define MX6DL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x05c 0x370 0x000 0x0 0x0 +#define MX6DL_PAD_CSI0_DAT14__EIM_DATA10 0x05c 0x370 0x000 0x1 0x0 +#define MX6DL_PAD_CSI0_DAT14__UART5_TX_DATA 0x05c 0x370 0x000 0x3 0x0 +#define MX6DL_PAD_CSI0_DAT14__UART5_RX_DATA 0x05c 0x370 0x91c 0x3 0x0 +#define MX6DL_PAD_CSI0_DAT14__GPIO6_IO00 0x05c 0x370 0x000 0x5 0x0 +#define MX6DL_PAD_CSI0_DAT14__ARM_TRACE11 0x05c 0x370 0x000 0x7 0x0 +#define MX6DL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x060 0x374 0x000 0x0 0x0 +#define MX6DL_PAD_CSI0_DAT15__EIM_DATA11 0x060 0x374 0x000 0x1 0x0 +#define MX6DL_PAD_CSI0_DAT15__UART5_RX_DATA 0x060 0x374 0x91c 0x3 0x1 +#define MX6DL_PAD_CSI0_DAT15__UART5_TX_DATA 0x060 0x374 0x000 0x3 0x0 +#define MX6DL_PAD_CSI0_DAT15__GPIO6_IO01 0x060 0x374 0x000 0x5 0x0 +#define MX6DL_PAD_CSI0_DAT15__ARM_TRACE12 0x060 0x374 0x000 0x7 0x0 +#define MX6DL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x064 0x378 0x000 0x0 0x0 +#define MX6DL_PAD_CSI0_DAT16__EIM_DATA12 0x064 0x378 0x000 0x1 0x0 +#define MX6DL_PAD_CSI0_DAT16__UART4_RTS_B 0x064 0x378 0x910 0x3 0x0 +#define MX6DL_PAD_CSI0_DAT16__UART4_CTS_B 0x064 0x378 0x000 0x3 0x0 +#define MX6DL_PAD_CSI0_DAT16__GPIO6_IO02 0x064 0x378 0x000 0x5 0x0 +#define MX6DL_PAD_CSI0_DAT16__ARM_TRACE13 0x064 0x378 0x000 0x7 0x0 +#define MX6DL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x068 0x37c 0x000 0x0 0x0 +#define MX6DL_PAD_CSI0_DAT17__EIM_DATA13 0x068 0x37c 0x000 0x1 0x0 +#define MX6DL_PAD_CSI0_DAT17__UART4_CTS_B 0x068 0x37c 0x000 0x3 0x0 +#define MX6DL_PAD_CSI0_DAT17__UART4_RTS_B 0x068 0x37c 0x910 0x3 0x1 +#define MX6DL_PAD_CSI0_DAT17__GPIO6_IO03 0x068 0x37c 0x000 0x5 0x0 +#define MX6DL_PAD_CSI0_DAT17__ARM_TRACE14 0x068 0x37c 0x000 0x7 0x0 +#define MX6DL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x06c 0x380 0x000 0x0 0x0 +#define MX6DL_PAD_CSI0_DAT18__EIM_DATA14 0x06c 0x380 0x000 0x1 0x0 +#define MX6DL_PAD_CSI0_DAT18__UART5_RTS_B 0x06c 0x380 0x918 0x3 0x0 +#define MX6DL_PAD_CSI0_DAT18__UART5_CTS_B 0x06c 0x380 0x000 0x3 0x0 +#define MX6DL_PAD_CSI0_DAT18__GPIO6_IO04 0x06c 0x380 0x000 0x5 0x0 +#define MX6DL_PAD_CSI0_DAT18__ARM_TRACE15 0x06c 0x380 0x000 0x7 0x0 +#define MX6DL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x070 0x384 0x000 0x0 0x0 +#define MX6DL_PAD_CSI0_DAT19__EIM_DATA15 0x070 0x384 0x000 0x1 0x0 +#define MX6DL_PAD_CSI0_DAT19__UART5_CTS_B 0x070 0x384 0x000 0x3 0x0 +#define MX6DL_PAD_CSI0_DAT19__UART5_RTS_B 0x070 0x384 0x918 0x3 0x1 +#define MX6DL_PAD_CSI0_DAT19__GPIO6_IO05 0x070 0x384 0x000 0x5 0x0 +#define MX6DL_PAD_CSI0_DAT4__IPU1_CSI0_DATA04 0x074 0x388 0x000 0x0 0x0 +#define MX6DL_PAD_CSI0_DAT4__EIM_DATA02 0x074 0x388 0x000 0x1 0x0 +#define MX6DL_PAD_CSI0_DAT4__ECSPI1_SCLK 0x074 0x388 0x7d8 0x2 0x0 +#define MX6DL_PAD_CSI0_DAT4__KEY_COL5 0x074 0x388 0x8c0 0x3 0x0 +#define MX6DL_PAD_CSI0_DAT4__AUD3_TXC 0x074 0x388 0x000 0x4 0x0 +#define MX6DL_PAD_CSI0_DAT4__GPIO5_IO22 0x074 0x388 0x000 0x5 0x0 +#define MX6DL_PAD_CSI0_DAT4__ARM_TRACE01 0x074 0x388 0x000 0x7 0x0 +#define MX6DL_PAD_CSI0_DAT5__IPU1_CSI0_DATA05 0x078 0x38c 0x000 0x0 0x0 +#define MX6DL_PAD_CSI0_DAT5__EIM_DATA03 0x078 0x38c 0x000 0x1 0x0 +#define MX6DL_PAD_CSI0_DAT5__ECSPI1_MOSI 0x078 0x38c 0x7e0 0x2 0x0 +#define MX6DL_PAD_CSI0_DAT5__KEY_ROW5 0x078 0x38c 0x8cc 0x3 0x0 +#define MX6DL_PAD_CSI0_DAT5__AUD3_TXD 0x078 0x38c 0x000 0x4 0x0 +#define MX6DL_PAD_CSI0_DAT5__GPIO5_IO23 0x078 0x38c 0x000 0x5 0x0 +#define MX6DL_PAD_CSI0_DAT5__ARM_TRACE02 0x078 0x38c 0x000 0x7 0x0 +#define MX6DL_PAD_CSI0_DAT6__IPU1_CSI0_DATA06 0x07c 0x390 0x000 0x0 0x0 +#define MX6DL_PAD_CSI0_DAT6__EIM_DATA04 0x07c 0x390 0x000 0x1 0x0 +#define MX6DL_PAD_CSI0_DAT6__ECSPI1_MISO 0x07c 0x390 0x7dc 0x2 0x0 +#define MX6DL_PAD_CSI0_DAT6__KEY_COL6 0x07c 0x390 0x8c4 0x3 0x0 +#define MX6DL_PAD_CSI0_DAT6__AUD3_TXFS 0x07c 0x390 0x000 0x4 0x0 +#define MX6DL_PAD_CSI0_DAT6__GPIO5_IO24 0x07c 0x390 0x000 0x5 0x0 +#define MX6DL_PAD_CSI0_DAT6__ARM_TRACE03 0x07c 0x390 0x000 0x7 0x0 +#define MX6DL_PAD_CSI0_DAT7__IPU1_CSI0_DATA07 0x080 0x394 0x000 0x0 0x0 +#define MX6DL_PAD_CSI0_DAT7__EIM_DATA05 0x080 0x394 0x000 0x1 0x0 +#define MX6DL_PAD_CSI0_DAT7__ECSPI1_SS0 0x080 0x394 0x7e4 0x2 0x0 +#define MX6DL_PAD_CSI0_DAT7__KEY_ROW6 0x080 0x394 0x8d0 0x3 0x0 +#define MX6DL_PAD_CSI0_DAT7__AUD3_RXD 0x080 0x394 0x000 0x4 0x0 +#define MX6DL_PAD_CSI0_DAT7__GPIO5_IO25 0x080 0x394 0x000 0x5 0x0 +#define MX6DL_PAD_CSI0_DAT7__ARM_TRACE04 0x080 0x394 0x000 0x7 0x0 +#define MX6DL_PAD_CSI0_DAT8__IPU1_CSI0_DATA08 0x084 0x398 0x000 0x0 0x0 +#define MX6DL_PAD_CSI0_DAT8__EIM_DATA06 0x084 0x398 0x000 0x1 0x0 +#define MX6DL_PAD_CSI0_DAT8__ECSPI2_SCLK 0x084 0x398 0x7f4 0x2 0x0 +#define MX6DL_PAD_CSI0_DAT8__KEY_COL7 0x084 0x398 0x8c8 0x3 0x0 +#define MX6DL_PAD_CSI0_DAT8__I2C1_SDA 0x084 0x398 0x86c 0x4 0x0 +#define MX6DL_PAD_CSI0_DAT8__GPIO5_IO26 0x084 0x398 0x000 0x5 0x0 +#define MX6DL_PAD_CSI0_DAT8__ARM_TRACE05 0x084 0x398 0x000 0x7 0x0 +#define MX6DL_PAD_CSI0_DAT9__IPU1_CSI0_DATA09 0x088 0x39c 0x000 0x0 0x0 +#define MX6DL_PAD_CSI0_DAT9__EIM_DATA07 0x088 0x39c 0x000 0x1 0x0 +#define MX6DL_PAD_CSI0_DAT9__ECSPI2_MOSI 0x088 0x39c 0x7fc 0x2 0x0 +#define MX6DL_PAD_CSI0_DAT9__KEY_ROW7 0x088 0x39c 0x8d4 0x3 0x0 +#define MX6DL_PAD_CSI0_DAT9__I2C1_SCL 0x088 0x39c 0x868 0x4 0x0 +#define MX6DL_PAD_CSI0_DAT9__GPIO5_IO27 0x088 0x39c 0x000 0x5 0x0 +#define MX6DL_PAD_CSI0_DAT9__ARM_TRACE06 0x088 0x39c 0x000 0x7 0x0 +#define MX6DL_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN 0x08c 0x3a0 0x000 0x0 0x0 +#define MX6DL_PAD_CSI0_DATA_EN__EIM_DATA00 0x08c 0x3a0 0x000 0x1 0x0 +#define MX6DL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x08c 0x3a0 0x000 0x5 0x0 +#define MX6DL_PAD_CSI0_DATA_EN__ARM_TRACE_CLK 0x08c 0x3a0 0x000 0x7 0x0 +#define MX6DL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x090 0x3a4 0x000 0x0 0x0 +#define MX6DL_PAD_CSI0_MCLK__CCM_CLKO1 0x090 0x3a4 0x000 0x3 0x0 +#define MX6DL_PAD_CSI0_MCLK__GPIO5_IO19 0x090 0x3a4 0x000 0x5 0x0 +#define MX6DL_PAD_CSI0_MCLK__ARM_TRACE_CTL 0x090 0x3a4 0x000 0x7 0x0 +#define MX6DL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x094 0x3a8 0x000 0x0 0x0 +#define MX6DL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x094 0x3a8 0x000 0x5 0x0 +#define MX6DL_PAD_CSI0_PIXCLK__ARM_EVENTO 0x094 0x3a8 0x000 0x7 0x0 +#define MX6DL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x098 0x3ac 0x000 0x0 0x0 +#define MX6DL_PAD_CSI0_VSYNC__EIM_DATA01 0x098 0x3ac 0x000 0x1 0x0 +#define MX6DL_PAD_CSI0_VSYNC__GPIO5_IO21 0x098 0x3ac 0x000 0x5 0x0 +#define MX6DL_PAD_CSI0_VSYNC__ARM_TRACE00 0x098 0x3ac 0x000 0x7 0x0 +#define MX6DL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x09c 0x3b0 0x000 0x0 0x0 +#define MX6DL_PAD_DI0_DISP_CLK__LCD_CLK 0x09c 0x3b0 0x000 0x1 0x0 +#define MX6DL_PAD_DI0_DISP_CLK__GPIO4_IO16 0x09c 0x3b0 0x000 0x5 0x0 +#define MX6DL_PAD_DI0_DISP_CLK__LCD_WR_RWN 0x09c 0x3b0 0x000 0x8 0x0 +#define MX6DL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x0a0 0x3b4 0x000 0x0 0x0 +#define MX6DL_PAD_DI0_PIN15__LCD_ENABLE 0x0a0 0x3b4 0x000 0x1 0x0 +#define MX6DL_PAD_DI0_PIN15__AUD6_TXC 0x0a0 0x3b4 0x000 0x2 0x0 +#define MX6DL_PAD_DI0_PIN15__GPIO4_IO17 0x0a0 0x3b4 0x000 0x5 0x0 +#define MX6DL_PAD_DI0_PIN15__LCD_RD_E 0x0a0 0x3b4 0x000 0x8 0x0 +#define MX6DL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x0a4 0x3b8 0x000 0x0 0x0 +#define MX6DL_PAD_DI0_PIN2__LCD_HSYNC 0x0a4 0x3b8 0x8d8 0x1 0x0 +#define MX6DL_PAD_DI0_PIN2__AUD6_TXD 0x0a4 0x3b8 0x000 0x2 0x0 +#define MX6DL_PAD_DI0_PIN2__GPIO4_IO18 0x0a4 0x3b8 0x000 0x5 0x0 +#define MX6DL_PAD_DI0_PIN2__LCD_RS 0x0a4 0x3b8 0x000 0x8 0x0 +#define MX6DL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x0a8 0x3bc 0x000 0x0 0x0 +#define MX6DL_PAD_DI0_PIN3__LCD_VSYNC 0x0a8 0x3bc 0x000 0x1 0x0 +#define MX6DL_PAD_DI0_PIN3__AUD6_TXFS 0x0a8 0x3bc 0x000 0x2 0x0 +#define MX6DL_PAD_DI0_PIN3__GPIO4_IO19 0x0a8 0x3bc 0x000 0x5 0x0 +#define MX6DL_PAD_DI0_PIN3__LCD_CS 0x0a8 0x3bc 0x000 0x8 0x0 +#define MX6DL_PAD_DI0_PIN4__IPU1_DI0_PIN04 0x0ac 0x3c0 0x000 0x0 0x0 +#define MX6DL_PAD_DI0_PIN4__LCD_BUSY 0x0ac 0x3c0 0x8d8 0x1 0x1 +#define MX6DL_PAD_DI0_PIN4__AUD6_RXD 0x0ac 0x3c0 0x000 0x2 0x0 +#define MX6DL_PAD_DI0_PIN4__SD1_WP 0x0ac 0x3c0 0x92c 0x3 0x0 +#define MX6DL_PAD_DI0_PIN4__GPIO4_IO20 0x0ac 0x3c0 0x000 0x5 0x0 +#define MX6DL_PAD_DI0_PIN4__LCD_RESET 0x0ac 0x3c0 0x000 0x8 0x0 +#define MX6DL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x0b0 0x3c4 0x000 0x0 0x0 +#define MX6DL_PAD_DISP0_DAT0__LCD_DATA00 0x0b0 0x3c4 0x000 0x1 0x0 +#define MX6DL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x0b0 0x3c4 0x000 0x2 0x0 +#define MX6DL_PAD_DISP0_DAT0__GPIO4_IO21 0x0b0 0x3c4 0x000 0x5 0x0 +#define MX6DL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x0b4 0x3c8 0x000 0x0 0x0 +#define MX6DL_PAD_DISP0_DAT1__LCD_DATA01 0x0b4 0x3c8 0x000 0x1 0x0 +#define MX6DL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x0b4 0x3c8 0x000 0x2 0x0 +#define MX6DL_PAD_DISP0_DAT1__GPIO4_IO22 0x0b4 0x3c8 0x000 0x5 0x0 +#define MX6DL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x0b8 0x3cc 0x000 0x0 0x0 +#define MX6DL_PAD_DISP0_DAT10__LCD_DATA10 0x0b8 0x3cc 0x000 0x1 0x0 +#define MX6DL_PAD_DISP0_DAT10__GPIO4_IO31 0x0b8 0x3cc 0x000 0x5 0x0 +#define MX6DL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x0bc 0x3d0 0x000 0x0 0x0 +#define MX6DL_PAD_DISP0_DAT11__LCD_DATA11 0x0bc 0x3d0 0x000 0x1 0x0 +#define MX6DL_PAD_DISP0_DAT11__GPIO5_IO05 0x0bc 0x3d0 0x000 0x5 0x0 +#define MX6DL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x0c0 0x3d4 0x000 0x0 0x0 +#define MX6DL_PAD_DISP0_DAT12__LCD_DATA12 0x0c0 0x3d4 0x000 0x1 0x0 +#define MX6DL_PAD_DISP0_DAT12__GPIO5_IO06 0x0c0 0x3d4 0x000 0x5 0x0 +#define MX6DL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x0c4 0x3d8 0x000 0x0 0x0 +#define MX6DL_PAD_DISP0_DAT13__LCD_DATA13 0x0c4 0x3d8 0x000 0x1 0x0 +#define MX6DL_PAD_DISP0_DAT13__AUD5_RXFS 0x0c4 0x3d8 0x7bc 0x3 0x0 +#define MX6DL_PAD_DISP0_DAT13__GPIO5_IO07 0x0c4 0x3d8 0x000 0x5 0x0 +#define MX6DL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x0c8 0x3dc 0x000 0x0 0x0 +#define MX6DL_PAD_DISP0_DAT14__LCD_DATA14 0x0c8 0x3dc 0x000 0x1 0x0 +#define MX6DL_PAD_DISP0_DAT14__AUD5_RXC 0x0c8 0x3dc 0x7b8 0x3 0x0 +#define MX6DL_PAD_DISP0_DAT14__GPIO5_IO08 0x0c8 0x3dc 0x000 0x5 0x0 +#define MX6DL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x0cc 0x3e0 0x000 0x0 0x0 +#define MX6DL_PAD_DISP0_DAT15__LCD_DATA15 0x0cc 0x3e0 0x000 0x1 0x0 +#define MX6DL_PAD_DISP0_DAT15__ECSPI1_SS1 0x0cc 0x3e0 0x7e8 0x2 0x0 +#define MX6DL_PAD_DISP0_DAT15__ECSPI2_SS1 0x0cc 0x3e0 0x804 0x3 0x0 +#define MX6DL_PAD_DISP0_DAT15__GPIO5_IO09 0x0cc 0x3e0 0x000 0x5 0x0 +#define MX6DL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x0d0 0x3e4 0x000 0x0 0x0 +#define MX6DL_PAD_DISP0_DAT16__LCD_DATA16 0x0d0 0x3e4 0x000 0x1 0x0 +#define MX6DL_PAD_DISP0_DAT16__ECSPI2_MOSI 0x0d0 0x3e4 0x7fc 0x2 0x1 +#define MX6DL_PAD_DISP0_DAT16__AUD5_TXC 0x0d0 0x3e4 0x7c0 0x3 0x0 +#define MX6DL_PAD_DISP0_DAT16__SDMA_EXT_EVENT0 0x0d0 0x3e4 0x8e8 0x4 0x0 +#define MX6DL_PAD_DISP0_DAT16__GPIO5_IO10 0x0d0 0x3e4 0x000 0x5 0x0 +#define MX6DL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x0d4 0x3e8 0x000 0x0 0x0 +#define MX6DL_PAD_DISP0_DAT17__LCD_DATA17 0x0d4 0x3e8 0x000 0x1 0x0 +#define MX6DL_PAD_DISP0_DAT17__ECSPI2_MISO 0x0d4 0x3e8 0x7f8 0x2 0x1 +#define MX6DL_PAD_DISP0_DAT17__AUD5_TXD 0x0d4 0x3e8 0x7b4 0x3 0x0 +#define MX6DL_PAD_DISP0_DAT17__SDMA_EXT_EVENT1 0x0d4 0x3e8 0x8ec 0x4 0x0 +#define MX6DL_PAD_DISP0_DAT17__GPIO5_IO11 0x0d4 0x3e8 0x000 0x5 0x0 +#define MX6DL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x0d8 0x3ec 0x000 0x0 0x0 +#define MX6DL_PAD_DISP0_DAT18__LCD_DATA18 0x0d8 0x3ec 0x000 0x1 0x0 +#define MX6DL_PAD_DISP0_DAT18__ECSPI2_SS0 0x0d8 0x3ec 0x800 0x2 0x1 +#define MX6DL_PAD_DISP0_DAT18__AUD5_TXFS 0x0d8 0x3ec 0x7c4 0x3 0x0 +#define MX6DL_PAD_DISP0_DAT18__AUD4_RXFS 0x0d8 0x3ec 0x7a4 0x4 0x0 +#define MX6DL_PAD_DISP0_DAT18__GPIO5_IO12 0x0d8 0x3ec 0x000 0x5 0x0 +#define MX6DL_PAD_DISP0_DAT18__EIM_CS2_B 0x0d8 0x3ec 0x000 0x7 0x0 +#define MX6DL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x0dc 0x3f0 0x000 0x0 0x0 +#define MX6DL_PAD_DISP0_DAT19__LCD_DATA19 0x0dc 0x3f0 0x000 0x1 0x0 +#define MX6DL_PAD_DISP0_DAT19__ECSPI2_SCLK 0x0dc 0x3f0 0x7f4 0x2 0x1 +#define MX6DL_PAD_DISP0_DAT19__AUD5_RXD 0x0dc 0x3f0 0x7b0 0x3 0x0 +#define MX6DL_PAD_DISP0_DAT19__AUD4_RXC 0x0dc 0x3f0 0x7a0 0x4 0x0 +#define MX6DL_PAD_DISP0_DAT19__GPIO5_IO13 0x0dc 0x3f0 0x000 0x5 0x0 +#define MX6DL_PAD_DISP0_DAT19__EIM_CS3_B 0x0dc 0x3f0 0x000 0x7 0x0 +#define MX6DL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x0e0 0x3f4 0x000 0x0 0x0 +#define MX6DL_PAD_DISP0_DAT2__LCD_DATA02 0x0e0 0x3f4 0x000 0x1 0x0 +#define MX6DL_PAD_DISP0_DAT2__ECSPI3_MISO 0x0e0 0x3f4 0x000 0x2 0x0 +#define MX6DL_PAD_DISP0_DAT2__GPIO4_IO23 0x0e0 0x3f4 0x000 0x5 0x0 +#define MX6DL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x0e4 0x3f8 0x000 0x0 0x0 +#define MX6DL_PAD_DISP0_DAT20__LCD_DATA20 0x0e4 0x3f8 0x000 0x1 0x0 +#define MX6DL_PAD_DISP0_DAT20__ECSPI1_SCLK 0x0e4 0x3f8 0x7d8 0x2 0x1 +#define MX6DL_PAD_DISP0_DAT20__AUD4_TXC 0x0e4 0x3f8 0x7a8 0x3 0x0 +#define MX6DL_PAD_DISP0_DAT20__GPIO5_IO14 0x0e4 0x3f8 0x000 0x5 0x0 +#define MX6DL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x0e8 0x3fc 0x000 0x0 0x0 +#define MX6DL_PAD_DISP0_DAT21__LCD_DATA21 0x0e8 0x3fc 0x000 0x1 0x0 +#define MX6DL_PAD_DISP0_DAT21__ECSPI1_MOSI 0x0e8 0x3fc 0x7e0 0x2 0x1 +#define MX6DL_PAD_DISP0_DAT21__AUD4_TXD 0x0e8 0x3fc 0x79c 0x3 0x0 +#define MX6DL_PAD_DISP0_DAT21__GPIO5_IO15 0x0e8 0x3fc 0x000 0x5 0x0 +#define MX6DL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x0ec 0x400 0x000 0x0 0x0 +#define MX6DL_PAD_DISP0_DAT22__LCD_DATA22 0x0ec 0x400 0x000 0x1 0x0 +#define MX6DL_PAD_DISP0_DAT22__ECSPI1_MISO 0x0ec 0x400 0x7dc 0x2 0x1 +#define MX6DL_PAD_DISP0_DAT22__AUD4_TXFS 0x0ec 0x400 0x7ac 0x3 0x0 +#define MX6DL_PAD_DISP0_DAT22__GPIO5_IO16 0x0ec 0x400 0x000 0x5 0x0 +#define MX6DL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x0f0 0x404 0x000 0x0 0x0 +#define MX6DL_PAD_DISP0_DAT23__LCD_DATA23 0x0f0 0x404 0x000 0x1 0x0 +#define MX6DL_PAD_DISP0_DAT23__ECSPI1_SS0 0x0f0 0x404 0x7e4 0x2 0x1 +#define MX6DL_PAD_DISP0_DAT23__AUD4_RXD 0x0f0 0x404 0x798 0x3 0x0 +#define MX6DL_PAD_DISP0_DAT23__GPIO5_IO17 0x0f0 0x404 0x000 0x5 0x0 +#define MX6DL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x0f4 0x408 0x000 0x0 0x0 +#define MX6DL_PAD_DISP0_DAT3__LCD_DATA03 0x0f4 0x408 0x000 0x1 0x0 +#define MX6DL_PAD_DISP0_DAT3__ECSPI3_SS0 0x0f4 0x408 0x000 0x2 0x0 +#define MX6DL_PAD_DISP0_DAT3__GPIO4_IO24 0x0f4 0x408 0x000 0x5 0x0 +#define MX6DL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x0f8 0x40c 0x000 0x0 0x0 +#define MX6DL_PAD_DISP0_DAT4__LCD_DATA04 0x0f8 0x40c 0x000 0x1 0x0 +#define MX6DL_PAD_DISP0_DAT4__ECSPI3_SS1 0x0f8 0x40c 0x000 0x2 0x0 +#define MX6DL_PAD_DISP0_DAT4__GPIO4_IO25 0x0f8 0x40c 0x000 0x5 0x0 +#define MX6DL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x0fc 0x410 0x000 0x0 0x0 +#define MX6DL_PAD_DISP0_DAT5__LCD_DATA05 0x0fc 0x410 0x000 0x1 0x0 +#define MX6DL_PAD_DISP0_DAT5__ECSPI3_SS2 0x0fc 0x410 0x000 0x2 0x0 +#define MX6DL_PAD_DISP0_DAT5__AUD6_RXFS 0x0fc 0x410 0x000 0x3 0x0 +#define MX6DL_PAD_DISP0_DAT5__GPIO4_IO26 0x0fc 0x410 0x000 0x5 0x0 +#define MX6DL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x100 0x414 0x000 0x0 0x0 +#define MX6DL_PAD_DISP0_DAT6__LCD_DATA06 0x100 0x414 0x000 0x1 0x0 +#define MX6DL_PAD_DISP0_DAT6__ECSPI3_SS3 0x100 0x414 0x000 0x2 0x0 +#define MX6DL_PAD_DISP0_DAT6__AUD6_RXC 0x100 0x414 0x000 0x3 0x0 +#define MX6DL_PAD_DISP0_DAT6__GPIO4_IO27 0x100 0x414 0x000 0x5 0x0 +#define MX6DL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x104 0x418 0x000 0x0 0x0 +#define MX6DL_PAD_DISP0_DAT7__LCD_DATA07 0x104 0x418 0x000 0x1 0x0 +#define MX6DL_PAD_DISP0_DAT7__ECSPI3_RDY 0x104 0x418 0x000 0x2 0x0 +#define MX6DL_PAD_DISP0_DAT7__GPIO4_IO28 0x104 0x418 0x000 0x5 0x0 +#define MX6DL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x108 0x41c 0x000 0x0 0x0 +#define MX6DL_PAD_DISP0_DAT8__LCD_DATA08 0x108 0x41c 0x000 0x1 0x0 +#define MX6DL_PAD_DISP0_DAT8__PWM1_OUT 0x108 0x41c 0x000 0x2 0x0 +#define MX6DL_PAD_DISP0_DAT8__WDOG1_B 0x108 0x41c 0x000 0x3 0x0 +#define MX6DL_PAD_DISP0_DAT8__GPIO4_IO29 0x108 0x41c 0x000 0x5 0x0 +#define MX6DL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10c 0x420 0x000 0x0 0x0 +#define MX6DL_PAD_DISP0_DAT9__LCD_DATA09 0x10c 0x420 0x000 0x1 0x0 +#define MX6DL_PAD_DISP0_DAT9__PWM2_OUT 0x10c 0x420 0x000 0x2 0x0 +#define MX6DL_PAD_DISP0_DAT9__WDOG2_B 0x10c 0x420 0x000 0x3 0x0 +#define MX6DL_PAD_DISP0_DAT9__GPIO4_IO30 0x10c 0x420 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_A16__EIM_ADDR16 0x110 0x4e0 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_A16__IPU1_DI1_DISP_CLK 0x110 0x4e0 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_A16__IPU1_CSI1_PIXCLK 0x110 0x4e0 0x8b8 0x2 0x0 +#define MX6DL_PAD_EIM_A16__GPIO2_IO22 0x110 0x4e0 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_A16__SRC_BOOT_CFG16 0x110 0x4e0 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_A16__EPDC_DATA00 0x110 0x4e0 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_A17__EIM_ADDR17 0x114 0x4e4 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_A17__IPU1_DISP1_DATA12 0x114 0x4e4 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_A17__IPU1_CSI1_DATA12 0x114 0x4e4 0x890 0x2 0x0 +#define MX6DL_PAD_EIM_A17__GPIO2_IO21 0x114 0x4e4 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_A17__SRC_BOOT_CFG17 0x114 0x4e4 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_A17__EPDC_PWR_STAT 0x114 0x4e4 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_A18__EIM_ADDR18 0x118 0x4e8 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_A18__IPU1_DISP1_DATA13 0x118 0x4e8 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_A18__IPU1_CSI1_DATA13 0x118 0x4e8 0x894 0x2 0x0 +#define MX6DL_PAD_EIM_A18__GPIO2_IO20 0x118 0x4e8 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_A18__SRC_BOOT_CFG18 0x118 0x4e8 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_A18__EPDC_PWR_CTRL0 0x118 0x4e8 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_A19__EIM_ADDR19 0x11c 0x4ec 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_A19__IPU1_DISP1_DATA14 0x11c 0x4ec 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_A19__IPU1_CSI1_DATA14 0x11c 0x4ec 0x898 0x2 0x0 +#define MX6DL_PAD_EIM_A19__GPIO2_IO19 0x11c 0x4ec 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_A19__SRC_BOOT_CFG19 0x11c 0x4ec 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_A19__EPDC_PWR_CTRL1 0x11c 0x4ec 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_A20__EIM_ADDR20 0x120 0x4f0 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_A20__IPU1_DISP1_DATA15 0x120 0x4f0 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_A20__IPU1_CSI1_DATA15 0x120 0x4f0 0x89c 0x2 0x0 +#define MX6DL_PAD_EIM_A20__GPIO2_IO18 0x120 0x4f0 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_A20__SRC_BOOT_CFG20 0x120 0x4f0 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_A20__EPDC_PWR_CTRL2 0x120 0x4f0 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_A21__EIM_ADDR21 0x124 0x4f4 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_A21__IPU1_DISP1_DATA16 0x124 0x4f4 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_A21__IPU1_CSI1_DATA16 0x124 0x4f4 0x8a0 0x2 0x0 +#define MX6DL_PAD_EIM_A21__GPIO2_IO17 0x124 0x4f4 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_A21__SRC_BOOT_CFG21 0x124 0x4f4 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_A21__EPDC_GDCLK 0x124 0x4f4 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_A22__EIM_ADDR22 0x128 0x4f8 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_A22__IPU1_DISP1_DATA17 0x128 0x4f8 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_A22__IPU1_CSI1_DATA17 0x128 0x4f8 0x8a4 0x2 0x0 +#define MX6DL_PAD_EIM_A22__GPIO2_IO16 0x128 0x4f8 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_A22__SRC_BOOT_CFG22 0x128 0x4f8 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_A22__EPDC_GDSP 0x128 0x4f8 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_A23__EIM_ADDR23 0x12c 0x4fc 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_A23__IPU1_DISP1_DATA18 0x12c 0x4fc 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_A23__IPU1_CSI1_DATA18 0x12c 0x4fc 0x8a8 0x2 0x0 +#define MX6DL_PAD_EIM_A23__IPU1_SISG3 0x12c 0x4fc 0x000 0x4 0x0 +#define MX6DL_PAD_EIM_A23__GPIO6_IO06 0x12c 0x4fc 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_A23__SRC_BOOT_CFG23 0x12c 0x4fc 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_A23__EPDC_GDOE 0x12c 0x4fc 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_A24__EIM_ADDR24 0x130 0x500 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_A24__IPU1_DISP1_DATA19 0x130 0x500 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_A24__IPU1_CSI1_DATA19 0x130 0x500 0x8ac 0x2 0x0 +#define MX6DL_PAD_EIM_A24__IPU1_SISG2 0x130 0x500 0x000 0x4 0x0 +#define MX6DL_PAD_EIM_A24__GPIO5_IO04 0x130 0x500 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_A24__SRC_BOOT_CFG24 0x130 0x500 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_A24__EPDC_GDRL 0x130 0x500 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_A25__EIM_ADDR25 0x134 0x504 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_A25__ECSPI4_SS1 0x134 0x504 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_A25__ECSPI2_RDY 0x134 0x504 0x000 0x2 0x0 +#define MX6DL_PAD_EIM_A25__IPU1_DI1_PIN12 0x134 0x504 0x000 0x3 0x0 +#define MX6DL_PAD_EIM_A25__IPU1_DI0_D1_CS 0x134 0x504 0x000 0x4 0x0 +#define MX6DL_PAD_EIM_A25__GPIO5_IO02 0x134 0x504 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_A25__HDMI_TX_CEC_LINE 0x134 0x504 0x85c 0x6 0x0 +#define MX6DL_PAD_EIM_A25__EPDC_DATA15 0x134 0x504 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_A25__EIM_ACLK_FREERUN 0x134 0x504 0x000 0x9 0x0 +#define MX6DL_PAD_EIM_BCLK__EIM_BCLK 0x138 0x508 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_BCLK__IPU1_DI1_PIN16 0x138 0x508 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_BCLK__GPIO6_IO31 0x138 0x508 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_BCLK__EPDC_SDCE9 0x138 0x508 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_CS0__EIM_CS0_B 0x13c 0x50c 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_CS0__IPU1_DI1_PIN05 0x13c 0x50c 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_CS0__ECSPI2_SCLK 0x13c 0x50c 0x7f4 0x2 0x2 +#define MX6DL_PAD_EIM_CS0__GPIO2_IO23 0x13c 0x50c 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_CS0__EPDC_DATA06 0x13c 0x50c 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_CS1__EIM_CS1_B 0x140 0x510 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_CS1__IPU1_DI1_PIN06 0x140 0x510 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_CS1__ECSPI2_MOSI 0x140 0x510 0x7fc 0x2 0x2 +#define MX6DL_PAD_EIM_CS1__GPIO2_IO24 0x140 0x510 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_CS1__EPDC_DATA08 0x140 0x510 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_D16__EIM_DATA16 0x144 0x514 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_D16__ECSPI1_SCLK 0x144 0x514 0x7d8 0x1 0x2 +#define MX6DL_PAD_EIM_D16__IPU1_DI0_PIN05 0x144 0x514 0x000 0x2 0x0 +#define MX6DL_PAD_EIM_D16__IPU1_CSI1_DATA18 0x144 0x514 0x8a8 0x3 0x1 +#define MX6DL_PAD_EIM_D16__HDMI_TX_DDC_SDA 0x144 0x514 0x864 0x4 0x0 +#define MX6DL_PAD_EIM_D16__GPIO3_IO16 0x144 0x514 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_D16__I2C2_SDA 0x144 0x514 0x874 0x6 0x0 +#define MX6DL_PAD_EIM_D16__EPDC_DATA10 0x144 0x514 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_D17__EIM_DATA17 0x148 0x518 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_D17__ECSPI1_MISO 0x148 0x518 0x7dc 0x1 0x2 +#define MX6DL_PAD_EIM_D17__IPU1_DI0_PIN06 0x148 0x518 0x000 0x2 0x0 +#define MX6DL_PAD_EIM_D17__IPU1_CSI1_PIXCLK 0x148 0x518 0x8b8 0x3 0x1 +#define MX6DL_PAD_EIM_D17__DCIC1_OUT 0x148 0x518 0x000 0x4 0x0 +#define MX6DL_PAD_EIM_D17__GPIO3_IO17 0x148 0x518 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_D17__I2C3_SCL 0x148 0x518 0x878 0x6 0x0 +#define MX6DL_PAD_EIM_D17__EPDC_VCOM0 0x148 0x518 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_D18__EIM_DATA18 0x14c 0x51c 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_D18__ECSPI1_MOSI 0x14c 0x51c 0x7e0 0x1 0x2 +#define MX6DL_PAD_EIM_D18__IPU1_DI0_PIN07 0x14c 0x51c 0x000 0x2 0x0 +#define MX6DL_PAD_EIM_D18__IPU1_CSI1_DATA17 0x14c 0x51c 0x8a4 0x3 0x1 +#define MX6DL_PAD_EIM_D18__IPU1_DI1_D0_CS 0x14c 0x51c 0x000 0x4 0x0 +#define MX6DL_PAD_EIM_D18__GPIO3_IO18 0x14c 0x51c 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_D18__I2C3_SDA 0x14c 0x51c 0x87c 0x6 0x0 +#define MX6DL_PAD_EIM_D18__EPDC_VCOM1 0x14c 0x51c 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_D19__EIM_DATA19 0x150 0x520 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_D19__ECSPI1_SS1 0x150 0x520 0x7e8 0x1 0x1 +#define MX6DL_PAD_EIM_D19__IPU1_DI0_PIN08 0x150 0x520 0x000 0x2 0x0 +#define MX6DL_PAD_EIM_D19__IPU1_CSI1_DATA16 0x150 0x520 0x8a0 0x3 0x1 +#define MX6DL_PAD_EIM_D19__UART1_CTS_B 0x150 0x520 0x000 0x4 0x0 +#define MX6DL_PAD_EIM_D19__UART1_RTS_B 0x150 0x520 0x8f8 0x4 0x0 +#define MX6DL_PAD_EIM_D19__GPIO3_IO19 0x150 0x520 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_D19__EPIT1_OUT 0x150 0x520 0x000 0x6 0x0 +#define MX6DL_PAD_EIM_D19__EPDC_DATA12 0x150 0x520 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_D20__EIM_DATA20 0x154 0x524 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_D20__ECSPI4_SS0 0x154 0x524 0x808 0x1 0x0 +#define MX6DL_PAD_EIM_D20__IPU1_DI0_PIN16 0x154 0x524 0x000 0x2 0x0 +#define MX6DL_PAD_EIM_D20__IPU1_CSI1_DATA15 0x154 0x524 0x89c 0x3 0x1 +#define MX6DL_PAD_EIM_D20__UART1_RTS_B 0x154 0x524 0x8f8 0x4 0x1 +#define MX6DL_PAD_EIM_D20__UART1_CTS_B 0x154 0x524 0x000 0x4 0x0 +#define MX6DL_PAD_EIM_D20__GPIO3_IO20 0x154 0x524 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_D20__EPIT2_OUT 0x154 0x524 0x000 0x6 0x0 +#define MX6DL_PAD_EIM_D21__EIM_DATA21 0x158 0x528 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_D21__ECSPI4_SCLK 0x158 0x528 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_D21__IPU1_DI0_PIN17 0x158 0x528 0x000 0x2 0x0 +#define MX6DL_PAD_EIM_D21__IPU1_CSI1_DATA11 0x158 0x528 0x88c 0x3 0x0 +#define MX6DL_PAD_EIM_D21__USB_OTG_OC 0x158 0x528 0x920 0x4 0x0 +#define MX6DL_PAD_EIM_D21__GPIO3_IO21 0x158 0x528 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_D21__I2C1_SCL 0x158 0x528 0x868 0x6 0x1 +#define MX6DL_PAD_EIM_D21__SPDIF_IN 0x158 0x528 0x8f0 0x7 0x0 +#define MX6DL_PAD_EIM_D22__EIM_DATA22 0x15c 0x52c 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_D22__ECSPI4_MISO 0x15c 0x52c 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_D22__IPU1_DI0_PIN01 0x15c 0x52c 0x000 0x2 0x0 +#define MX6DL_PAD_EIM_D22__IPU1_CSI1_DATA10 0x15c 0x52c 0x888 0x3 0x0 +#define MX6DL_PAD_EIM_D22__USB_OTG_PWR 0x15c 0x52c 0x000 0x4 0x0 +#define MX6DL_PAD_EIM_D22__GPIO3_IO22 0x15c 0x52c 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_D22__SPDIF_OUT 0x15c 0x52c 0x000 0x6 0x0 +#define MX6DL_PAD_EIM_D22__EPDC_SDCE6 0x15c 0x52c 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_D23__EIM_DATA23 0x160 0x530 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_D23__IPU1_DI0_D0_CS 0x160 0x530 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_D23__UART3_CTS_B 0x160 0x530 0x000 0x2 0x0 +#define MX6DL_PAD_EIM_D23__UART3_RTS_B 0x160 0x530 0x908 0x2 0x0 +#define MX6DL_PAD_EIM_D23__UART1_DCD_B 0x160 0x530 0x000 0x3 0x0 +#define MX6DL_PAD_EIM_D23__IPU1_CSI1_DATA_EN 0x160 0x530 0x8b0 0x4 0x0 +#define MX6DL_PAD_EIM_D23__GPIO3_IO23 0x160 0x530 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_D23__IPU1_DI1_PIN02 0x160 0x530 0x000 0x6 0x0 +#define MX6DL_PAD_EIM_D23__IPU1_DI1_PIN14 0x160 0x530 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_D23__EPDC_DATA11 0x160 0x530 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_D24__EIM_DATA24 0x164 0x534 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_D24__ECSPI4_SS2 0x164 0x534 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_D24__UART3_TX_DATA 0x164 0x534 0x000 0x2 0x0 +#define MX6DL_PAD_EIM_D24__UART3_RX_DATA 0x164 0x534 0x90c 0x2 0x0 +#define MX6DL_PAD_EIM_D24__ECSPI1_SS2 0x164 0x534 0x7ec 0x3 0x0 +#define MX6DL_PAD_EIM_D24__ECSPI2_SS2 0x164 0x534 0x000 0x4 0x0 +#define MX6DL_PAD_EIM_D24__GPIO3_IO24 0x164 0x534 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_D24__AUD5_RXFS 0x164 0x534 0x7bc 0x6 0x1 +#define MX6DL_PAD_EIM_D24__UART1_DTR_B 0x164 0x534 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_D24__EPDC_SDCE7 0x164 0x534 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_D25__EIM_DATA25 0x168 0x538 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_D25__ECSPI4_SS3 0x168 0x538 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_D25__UART3_RX_DATA 0x168 0x538 0x90c 0x2 0x1 +#define MX6DL_PAD_EIM_D25__UART3_TX_DATA 0x168 0x538 0x000 0x2 0x0 +#define MX6DL_PAD_EIM_D25__ECSPI1_SS3 0x168 0x538 0x7f0 0x3 0x0 +#define MX6DL_PAD_EIM_D25__ECSPI2_SS3 0x168 0x538 0x000 0x4 0x0 +#define MX6DL_PAD_EIM_D25__GPIO3_IO25 0x168 0x538 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_D25__AUD5_RXC 0x168 0x538 0x7b8 0x6 0x1 +#define MX6DL_PAD_EIM_D25__UART1_DSR_B 0x168 0x538 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_D25__EPDC_SDCE8 0x168 0x538 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_D26__EIM_DATA26 0x16c 0x53c 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_D26__IPU1_DI1_PIN11 0x16c 0x53c 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_D26__IPU1_CSI0_DATA01 0x16c 0x53c 0x000 0x2 0x0 +#define MX6DL_PAD_EIM_D26__IPU1_CSI1_DATA14 0x16c 0x53c 0x898 0x3 0x1 +#define MX6DL_PAD_EIM_D26__UART2_TX_DATA 0x16c 0x53c 0x000 0x4 0x0 +#define MX6DL_PAD_EIM_D26__UART2_RX_DATA 0x16c 0x53c 0x904 0x4 0x0 +#define MX6DL_PAD_EIM_D26__GPIO3_IO26 0x16c 0x53c 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_D26__IPU1_SISG2 0x16c 0x53c 0x000 0x6 0x0 +#define MX6DL_PAD_EIM_D26__IPU1_DISP1_DATA22 0x16c 0x53c 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_D26__EPDC_SDOED 0x16c 0x53c 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_D27__EIM_DATA27 0x170 0x540 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_D27__IPU1_DI1_PIN13 0x170 0x540 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_D27__IPU1_CSI0_DATA00 0x170 0x540 0x000 0x2 0x0 +#define MX6DL_PAD_EIM_D27__IPU1_CSI1_DATA13 0x170 0x540 0x894 0x3 0x1 +#define MX6DL_PAD_EIM_D27__UART2_RX_DATA 0x170 0x540 0x904 0x4 0x1 +#define MX6DL_PAD_EIM_D27__UART2_TX_DATA 0x170 0x540 0x000 0x4 0x0 +#define MX6DL_PAD_EIM_D27__GPIO3_IO27 0x170 0x540 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_D27__IPU1_SISG3 0x170 0x540 0x000 0x6 0x0 +#define MX6DL_PAD_EIM_D27__IPU1_DISP1_DATA23 0x170 0x540 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_D27__EPDC_SDOE 0x170 0x540 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_D28__EIM_DATA28 0x174 0x544 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_D28__I2C1_SDA 0x174 0x544 0x86c 0x1 0x1 +#define MX6DL_PAD_EIM_D28__ECSPI4_MOSI 0x174 0x544 0x000 0x2 0x0 +#define MX6DL_PAD_EIM_D28__IPU1_CSI1_DATA12 0x174 0x544 0x890 0x3 0x1 +#define MX6DL_PAD_EIM_D28__UART2_CTS_B 0x174 0x544 0x000 0x4 0x0 +#define MX6DL_PAD_EIM_D28__UART2_RTS_B 0x174 0x544 0x900 0x4 0x0 +#define MX6DL_PAD_EIM_D28__GPIO3_IO28 0x174 0x544 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_D28__IPU1_EXT_TRIG 0x174 0x544 0x000 0x6 0x0 +#define MX6DL_PAD_EIM_D28__IPU1_DI0_PIN13 0x174 0x544 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_D28__EPDC_PWR_CTRL3 0x174 0x544 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_D29__EIM_DATA29 0x178 0x548 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_D29__IPU1_DI1_PIN15 0x178 0x548 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_D29__ECSPI4_SS0 0x178 0x548 0x808 0x2 0x1 +#define MX6DL_PAD_EIM_D29__UART2_RTS_B 0x178 0x548 0x900 0x4 0x1 +#define MX6DL_PAD_EIM_D29__UART2_CTS_B 0x178 0x548 0x000 0x4 0x0 +#define MX6DL_PAD_EIM_D29__GPIO3_IO29 0x178 0x548 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_D29__IPU1_CSI1_VSYNC 0x178 0x548 0x8bc 0x6 0x0 +#define MX6DL_PAD_EIM_D29__IPU1_DI0_PIN14 0x178 0x548 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_D29__EPDC_PWR_WAKE 0x178 0x548 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_D30__EIM_DATA30 0x17c 0x54c 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_D30__IPU1_DISP1_DATA21 0x17c 0x54c 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_D30__IPU1_DI0_PIN11 0x17c 0x54c 0x000 0x2 0x0 +#define MX6DL_PAD_EIM_D30__IPU1_CSI0_DATA03 0x17c 0x54c 0x000 0x3 0x0 +#define MX6DL_PAD_EIM_D30__UART3_CTS_B 0x17c 0x54c 0x000 0x4 0x0 +#define MX6DL_PAD_EIM_D30__UART3_RTS_B 0x17c 0x54c 0x908 0x4 0x1 +#define MX6DL_PAD_EIM_D30__GPIO3_IO30 0x17c 0x54c 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_D30__USB_H1_OC 0x17c 0x54c 0x924 0x6 0x0 +#define MX6DL_PAD_EIM_D30__EPDC_SDOEZ 0x17c 0x54c 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_D31__EIM_DATA31 0x180 0x550 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_D31__IPU1_DISP1_DATA20 0x180 0x550 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_D31__IPU1_DI0_PIN12 0x180 0x550 0x000 0x2 0x0 +#define MX6DL_PAD_EIM_D31__IPU1_CSI0_DATA02 0x180 0x550 0x000 0x3 0x0 +#define MX6DL_PAD_EIM_D31__UART3_RTS_B 0x180 0x550 0x908 0x4 0x2 +#define MX6DL_PAD_EIM_D31__UART3_CTS_B 0x180 0x550 0x000 0x4 0x0 +#define MX6DL_PAD_EIM_D31__GPIO3_IO31 0x180 0x550 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_D31__USB_H1_PWR 0x180 0x550 0x000 0x6 0x0 +#define MX6DL_PAD_EIM_D31__EPDC_SDCLK_P 0x180 0x550 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_D31__EIM_ACLK_FREERUN 0x180 0x550 0x000 0x9 0x0 +#define MX6DL_PAD_EIM_DA0__EIM_AD00 0x184 0x554 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_DA0__IPU1_DISP1_DATA09 0x184 0x554 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_DA0__IPU1_CSI1_DATA09 0x184 0x554 0x000 0x2 0x0 +#define MX6DL_PAD_EIM_DA0__GPIO3_IO00 0x184 0x554 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_DA0__SRC_BOOT_CFG00 0x184 0x554 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_DA0__EPDC_SDCLK_N 0x184 0x554 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_DA1__EIM_AD01 0x188 0x558 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_DA1__IPU1_DISP1_DATA08 0x188 0x558 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_DA1__IPU1_CSI1_DATA08 0x188 0x558 0x000 0x2 0x0 +#define MX6DL_PAD_EIM_DA1__GPIO3_IO01 0x188 0x558 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_DA1__SRC_BOOT_CFG01 0x188 0x558 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_DA1__EPDC_SDLE 0x188 0x558 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_DA10__EIM_AD10 0x18c 0x55c 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_DA10__IPU1_DI1_PIN15 0x18c 0x55c 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_DA10__IPU1_CSI1_DATA_EN 0x18c 0x55c 0x8b0 0x2 0x1 +#define MX6DL_PAD_EIM_DA10__GPIO3_IO10 0x18c 0x55c 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_DA10__SRC_BOOT_CFG10 0x18c 0x55c 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_DA10__EPDC_DATA01 0x18c 0x55c 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_DA11__EIM_AD11 0x190 0x560 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_DA11__IPU1_DI1_PIN02 0x190 0x560 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_DA11__IPU1_CSI1_HSYNC 0x190 0x560 0x8b4 0x2 0x0 +#define MX6DL_PAD_EIM_DA11__GPIO3_IO11 0x190 0x560 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_DA11__SRC_BOOT_CFG11 0x190 0x560 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_DA11__EPDC_DATA03 0x190 0x560 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_DA12__EIM_AD12 0x194 0x564 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_DA12__IPU1_DI1_PIN03 0x194 0x564 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_DA12__IPU1_CSI1_VSYNC 0x194 0x564 0x8bc 0x2 0x1 +#define MX6DL_PAD_EIM_DA12__GPIO3_IO12 0x194 0x564 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_DA12__SRC_BOOT_CFG12 0x194 0x564 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_DA12__EPDC_DATA02 0x194 0x564 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_DA13__EIM_AD13 0x198 0x568 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_DA13__IPU1_DI1_D0_CS 0x198 0x568 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_DA13__GPIO3_IO13 0x198 0x568 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_DA13__SRC_BOOT_CFG13 0x198 0x568 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_DA13__EPDC_DATA13 0x198 0x568 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_DA14__EIM_AD14 0x19c 0x56c 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_DA14__IPU1_DI1_D1_CS 0x19c 0x56c 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_DA14__GPIO3_IO14 0x19c 0x56c 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_DA14__SRC_BOOT_CFG14 0x19c 0x56c 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_DA14__EPDC_DATA14 0x19c 0x56c 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_DA15__EIM_AD15 0x1a0 0x570 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_DA15__IPU1_DI1_PIN01 0x1a0 0x570 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_DA15__IPU1_DI1_PIN04 0x1a0 0x570 0x000 0x2 0x0 +#define MX6DL_PAD_EIM_DA15__GPIO3_IO15 0x1a0 0x570 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_DA15__SRC_BOOT_CFG15 0x1a0 0x570 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_DA15__EPDC_DATA09 0x1a0 0x570 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_DA2__EIM_AD02 0x1a4 0x574 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_DA2__IPU1_DISP1_DATA07 0x1a4 0x574 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_DA2__IPU1_CSI1_DATA07 0x1a4 0x574 0x000 0x2 0x0 +#define MX6DL_PAD_EIM_DA2__GPIO3_IO02 0x1a4 0x574 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_DA2__SRC_BOOT_CFG02 0x1a4 0x574 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_DA2__EPDC_BDR0 0x1a4 0x574 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_DA3__EIM_AD03 0x1a8 0x578 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_DA3__IPU1_DISP1_DATA06 0x1a8 0x578 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_DA3__IPU1_CSI1_DATA06 0x1a8 0x578 0x000 0x2 0x0 +#define MX6DL_PAD_EIM_DA3__GPIO3_IO03 0x1a8 0x578 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_DA3__SRC_BOOT_CFG03 0x1a8 0x578 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_DA3__EPDC_BDR1 0x1a8 0x578 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_DA4__EIM_AD04 0x1ac 0x57c 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_DA4__IPU1_DISP1_DATA05 0x1ac 0x57c 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_DA4__IPU1_CSI1_DATA05 0x1ac 0x57c 0x000 0x2 0x0 +#define MX6DL_PAD_EIM_DA4__GPIO3_IO04 0x1ac 0x57c 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_DA4__SRC_BOOT_CFG04 0x1ac 0x57c 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_DA4__EPDC_SDCE0 0x1ac 0x57c 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_DA5__EIM_AD05 0x1b0 0x580 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_DA5__IPU1_DISP1_DATA04 0x1b0 0x580 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_DA5__IPU1_CSI1_DATA04 0x1b0 0x580 0x000 0x2 0x0 +#define MX6DL_PAD_EIM_DA5__GPIO3_IO05 0x1b0 0x580 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_DA5__SRC_BOOT_CFG05 0x1b0 0x580 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_DA5__EPDC_SDCE1 0x1b0 0x580 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_DA6__EIM_AD06 0x1b4 0x584 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_DA6__IPU1_DISP1_DATA03 0x1b4 0x584 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_DA6__IPU1_CSI1_DATA03 0x1b4 0x584 0x000 0x2 0x0 +#define MX6DL_PAD_EIM_DA6__GPIO3_IO06 0x1b4 0x584 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_DA6__SRC_BOOT_CFG06 0x1b4 0x584 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_DA6__EPDC_SDCE2 0x1b4 0x584 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_DA7__EIM_AD07 0x1b8 0x588 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_DA7__IPU1_DISP1_DATA02 0x1b8 0x588 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_DA7__IPU1_CSI1_DATA02 0x1b8 0x588 0x000 0x2 0x0 +#define MX6DL_PAD_EIM_DA7__GPIO3_IO07 0x1b8 0x588 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_DA7__SRC_BOOT_CFG07 0x1b8 0x588 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_DA7__EPDC_SDCE3 0x1b8 0x588 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_DA8__EIM_AD08 0x1bc 0x58c 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_DA8__IPU1_DISP1_DATA01 0x1bc 0x58c 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_DA8__IPU1_CSI1_DATA01 0x1bc 0x58c 0x000 0x2 0x0 +#define MX6DL_PAD_EIM_DA8__GPIO3_IO08 0x1bc 0x58c 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_DA8__SRC_BOOT_CFG08 0x1bc 0x58c 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_DA8__EPDC_SDCE4 0x1bc 0x58c 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_DA9__EIM_AD09 0x1c0 0x590 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_DA9__IPU1_DISP1_DATA00 0x1c0 0x590 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_DA9__IPU1_CSI1_DATA00 0x1c0 0x590 0x000 0x2 0x0 +#define MX6DL_PAD_EIM_DA9__GPIO3_IO09 0x1c0 0x590 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_DA9__SRC_BOOT_CFG09 0x1c0 0x590 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_DA9__EPDC_SDCE5 0x1c0 0x590 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_EB0__EIM_EB0_B 0x1c4 0x594 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_EB0__IPU1_DISP1_DATA11 0x1c4 0x594 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_EB0__IPU1_CSI1_DATA11 0x1c4 0x594 0x88c 0x2 0x1 +#define MX6DL_PAD_EIM_EB0__CCM_PMIC_READY 0x1c4 0x594 0x7d4 0x4 0x0 +#define MX6DL_PAD_EIM_EB0__GPIO2_IO28 0x1c4 0x594 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_EB0__SRC_BOOT_CFG27 0x1c4 0x594 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_EB0__EPDC_PWR_COM 0x1c4 0x594 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_EB1__EIM_EB1_B 0x1c8 0x598 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_EB1__IPU1_DISP1_DATA10 0x1c8 0x598 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_EB1__IPU1_CSI1_DATA10 0x1c8 0x598 0x888 0x2 0x1 +#define MX6DL_PAD_EIM_EB1__GPIO2_IO29 0x1c8 0x598 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_EB1__SRC_BOOT_CFG28 0x1c8 0x598 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_EB1__EPDC_SDSHR 0x1c8 0x598 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_EB2__EIM_EB2_B 0x1cc 0x59c 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_EB2__ECSPI1_SS0 0x1cc 0x59c 0x7e4 0x1 0x2 +#define MX6DL_PAD_EIM_EB2__IPU1_CSI1_DATA19 0x1cc 0x59c 0x8ac 0x3 0x1 +#define MX6DL_PAD_EIM_EB2__HDMI_TX_DDC_SCL 0x1cc 0x59c 0x860 0x4 0x0 +#define MX6DL_PAD_EIM_EB2__GPIO2_IO30 0x1cc 0x59c 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_EB2__I2C2_SCL 0x1cc 0x59c 0x870 0x6 0x0 +#define MX6DL_PAD_EIM_EB2__SRC_BOOT_CFG30 0x1cc 0x59c 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_EB2__EPDC_DATA05 0x1cc 0x59c 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_EB3__EIM_EB3_B 0x1d0 0x5a0 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_EB3__ECSPI4_RDY 0x1d0 0x5a0 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_EB3__UART3_RTS_B 0x1d0 0x5a0 0x908 0x2 0x3 +#define MX6DL_PAD_EIM_EB3__UART3_CTS_B 0x1d0 0x5a0 0x000 0x2 0x0 +#define MX6DL_PAD_EIM_EB3__UART1_RI_B 0x1d0 0x5a0 0x000 0x3 0x0 +#define MX6DL_PAD_EIM_EB3__IPU1_CSI1_HSYNC 0x1d0 0x5a0 0x8b4 0x4 0x1 +#define MX6DL_PAD_EIM_EB3__GPIO2_IO31 0x1d0 0x5a0 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_EB3__IPU1_DI1_PIN03 0x1d0 0x5a0 0x000 0x6 0x0 +#define MX6DL_PAD_EIM_EB3__SRC_BOOT_CFG31 0x1d0 0x5a0 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_EB3__EPDC_SDCE0 0x1d0 0x5a0 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_EB3__EIM_ACLK_FREERUN 0x1d0 0x5a0 0x000 0x9 0x0 +#define MX6DL_PAD_EIM_LBA__EIM_LBA_B 0x1d4 0x5a4 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_LBA__IPU1_DI1_PIN17 0x1d4 0x5a4 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_LBA__ECSPI2_SS1 0x1d4 0x5a4 0x804 0x2 0x1 +#define MX6DL_PAD_EIM_LBA__GPIO2_IO27 0x1d4 0x5a4 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_LBA__SRC_BOOT_CFG26 0x1d4 0x5a4 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_LBA__EPDC_DATA04 0x1d4 0x5a4 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_OE__EIM_OE_B 0x1d8 0x5a8 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_OE__IPU1_DI1_PIN07 0x1d8 0x5a8 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_OE__ECSPI2_MISO 0x1d8 0x5a8 0x7f8 0x2 0x2 +#define MX6DL_PAD_EIM_OE__GPIO2_IO25 0x1d8 0x5a8 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_OE__EPDC_PWR_IRQ 0x1d8 0x5a8 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_RW__EIM_RW 0x1dc 0x5ac 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_RW__IPU1_DI1_PIN08 0x1dc 0x5ac 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_RW__ECSPI2_SS0 0x1dc 0x5ac 0x800 0x2 0x2 +#define MX6DL_PAD_EIM_RW__GPIO2_IO26 0x1dc 0x5ac 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_RW__SRC_BOOT_CFG29 0x1dc 0x5ac 0x000 0x7 0x0 +#define MX6DL_PAD_EIM_RW__EPDC_DATA07 0x1dc 0x5ac 0x000 0x8 0x0 +#define MX6DL_PAD_EIM_WAIT__EIM_WAIT_B 0x1e0 0x5b0 0x000 0x0 0x0 +#define MX6DL_PAD_EIM_WAIT__EIM_DTACK_B 0x1e0 0x5b0 0x000 0x1 0x0 +#define MX6DL_PAD_EIM_WAIT__GPIO5_IO00 0x1e0 0x5b0 0x000 0x5 0x0 +#define MX6DL_PAD_EIM_WAIT__SRC_BOOT_CFG25 0x1e0 0x5b0 0x000 0x7 0x0 +#define MX6DL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1e4 0x5b4 0x828 0x1 0x0 +#define MX6DL_PAD_ENET_CRS_DV__ESAI_TX_CLK 0x1e4 0x5b4 0x840 0x2 0x0 +#define MX6DL_PAD_ENET_CRS_DV__SPDIF_EXT_CLK 0x1e4 0x5b4 0x8f4 0x3 0x0 +#define MX6DL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1e4 0x5b4 0x000 0x5 0x0 +#define MX6DL_PAD_ENET_MDC__MLB_DATA 0x1e8 0x5b8 0x8e0 0x0 0x0 +#define MX6DL_PAD_ENET_MDC__ENET_MDC 0x1e8 0x5b8 0x000 0x1 0x0 +#define MX6DL_PAD_ENET_MDC__ESAI_TX5_RX0 0x1e8 0x5b8 0x858 0x2 0x0 +#define MX6DL_PAD_ENET_MDC__ENET_1588_EVENT1_IN 0x1e8 0x5b8 0x000 0x4 0x0 +#define MX6DL_PAD_ENET_MDC__GPIO1_IO31 0x1e8 0x5b8 0x000 0x5 0x0 +#define MX6DL_PAD_ENET_MDIO__ENET_MDIO 0x1ec 0x5bc 0x810 0x1 0x0 +#define MX6DL_PAD_ENET_MDIO__ESAI_RX_CLK 0x1ec 0x5bc 0x83c 0x2 0x0 +#define MX6DL_PAD_ENET_MDIO__ENET_1588_EVENT1_OUT 0x1ec 0x5bc 0x000 0x4 0x0 +#define MX6DL_PAD_ENET_MDIO__GPIO1_IO22 0x1ec 0x5bc 0x000 0x5 0x0 +#define MX6DL_PAD_ENET_MDIO__SPDIF_LOCK 0x1ec 0x5bc 0x000 0x6 0x0 +#define MX6DL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1f0 0x5c0 0x000 0x1 0x0 +#define MX6DL_PAD_ENET_REF_CLK__ESAI_RX_FS 0x1f0 0x5c0 0x82c 0x2 0x0 +#define MX6DL_PAD_ENET_REF_CLK__GPIO1_IO23 0x1f0 0x5c0 0x000 0x5 0x0 +#define MX6DL_PAD_ENET_REF_CLK__SPDIF_SR_CLK 0x1f0 0x5c0 0x000 0x6 0x0 +#define MX6DL_PAD_ENET_RX_ER__USB_OTG_ID 0x1f4 0x5c4 0x790 0x0 0x0 +#define MX6DL_PAD_ENET_RX_ER__ENET_RX_ER 0x1f4 0x5c4 0x000 0x1 0x0 +#define MX6DL_PAD_ENET_RX_ER__ESAI_RX_HF_CLK 0x1f4 0x5c4 0x834 0x2 0x0 +#define MX6DL_PAD_ENET_RX_ER__SPDIF_IN 0x1f4 0x5c4 0x8f0 0x3 0x1 +#define MX6DL_PAD_ENET_RX_ER__ENET_1588_EVENT2_OUT 0x1f4 0x5c4 0x000 0x4 0x0 +#define MX6DL_PAD_ENET_RX_ER__GPIO1_IO24 0x1f4 0x5c4 0x000 0x5 0x0 +#define MX6DL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1f8 0x5c8 0x818 0x1 0x0 +#define MX6DL_PAD_ENET_RXD0__ESAI_TX_HF_CLK 0x1f8 0x5c8 0x838 0x2 0x0 +#define MX6DL_PAD_ENET_RXD0__SPDIF_OUT 0x1f8 0x5c8 0x000 0x3 0x0 +#define MX6DL_PAD_ENET_RXD0__GPIO1_IO27 0x1f8 0x5c8 0x000 0x5 0x0 +#define MX6DL_PAD_ENET_RXD1__MLB_SIG 0x1fc 0x5cc 0x8e4 0x0 0x0 +#define MX6DL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1fc 0x5cc 0x81c 0x1 0x0 +#define MX6DL_PAD_ENET_RXD1__ESAI_TX_FS 0x1fc 0x5cc 0x830 0x2 0x0 +#define MX6DL_PAD_ENET_RXD1__ENET_1588_EVENT3_OUT 0x1fc 0x5cc 0x000 0x4 0x0 +#define MX6DL_PAD_ENET_RXD1__GPIO1_IO26 0x1fc 0x5cc 0x000 0x5 0x0 +#define MX6DL_PAD_ENET_TX_EN__ENET_TX_EN 0x200 0x5d0 0x000 0x1 0x0 +#define MX6DL_PAD_ENET_TX_EN__ESAI_TX3_RX2 0x200 0x5d0 0x850 0x2 0x0 +#define MX6DL_PAD_ENET_TX_EN__GPIO1_IO28 0x200 0x5d0 0x000 0x5 0x0 +#define MX6DL_PAD_ENET_TX_EN__I2C4_SCL 0x200 0x5d0 0x880 0x9 0x0 +#define MX6DL_PAD_ENET_TXD0__ENET_TX_DATA0 0x204 0x5d4 0x000 0x1 0x0 +#define MX6DL_PAD_ENET_TXD0__ESAI_TX4_RX1 0x204 0x5d4 0x854 0x2 0x0 +#define MX6DL_PAD_ENET_TXD0__GPIO1_IO30 0x204 0x5d4 0x000 0x5 0x0 +#define MX6DL_PAD_ENET_TXD1__MLB_CLK 0x208 0x5d8 0x8dc 0x0 0x0 +#define MX6DL_PAD_ENET_TXD1__ENET_TX_DATA1 0x208 0x5d8 0x000 0x1 0x0 +#define MX6DL_PAD_ENET_TXD1__ESAI_TX2_RX3 0x208 0x5d8 0x84c 0x2 0x0 +#define MX6DL_PAD_ENET_TXD1__ENET_1588_EVENT0_IN 0x208 0x5d8 0x000 0x4 0x0 +#define MX6DL_PAD_ENET_TXD1__GPIO1_IO29 0x208 0x5d8 0x000 0x5 0x0 +#define MX6DL_PAD_ENET_TXD1__I2C4_SDA 0x208 0x5d8 0x884 0x9 0x0 +#define MX6DL_PAD_GPIO_0__CCM_CLKO1 0x20c 0x5dc 0x000 0x0 0x0 +#define MX6DL_PAD_GPIO_0__KEY_COL5 0x20c 0x5dc 0x8c0 0x2 0x1 +#define MX6DL_PAD_GPIO_0__ASRC_EXT_CLK 0x20c 0x5dc 0x794 0x3 0x0 +#define MX6DL_PAD_GPIO_0__EPIT1_OUT 0x20c 0x5dc 0x000 0x4 0x0 +#define MX6DL_PAD_GPIO_0__GPIO1_IO00 0x20c 0x5dc 0x000 0x5 0x0 +#define MX6DL_PAD_GPIO_0__USB_H1_PWR 0x20c 0x5dc 0x000 0x6 0x0 +#define MX6DL_PAD_GPIO_0__SNVS_VIO_5 0x20c 0x5dc 0x000 0x7 0x0 +#define MX6DL_PAD_GPIO_1__ESAI_RX_CLK 0x210 0x5e0 0x83c 0x0 0x1 +#define MX6DL_PAD_GPIO_1__WDOG2_B 0x210 0x5e0 0x000 0x1 0x0 +#define MX6DL_PAD_GPIO_1__KEY_ROW5 0x210 0x5e0 0x8cc 0x2 0x1 +#define MX6DL_PAD_GPIO_1__USB_OTG_ID 0x210 0x5e0 0x790 0x3 0x1 +#define MX6DL_PAD_GPIO_1__PWM2_OUT 0x210 0x5e0 0x000 0x4 0x0 +#define MX6DL_PAD_GPIO_1__GPIO1_IO01 0x210 0x5e0 0x000 0x5 0x0 +#define MX6DL_PAD_GPIO_1__SD1_CD_B 0x210 0x5e0 0x000 0x6 0x0 +#define MX6DL_PAD_GPIO_16__ESAI_TX3_RX2 0x214 0x5e4 0x850 0x0 0x1 +#define MX6DL_PAD_GPIO_16__ENET_1588_EVENT2_IN 0x214 0x5e4 0x000 0x1 0x0 +#define MX6DL_PAD_GPIO_16__ENET_REF_CLK 0x214 0x5e4 0x80c 0x2 0x0 +#define MX6DL_PAD_GPIO_16__SD1_LCTL 0x214 0x5e4 0x000 0x3 0x0 +#define MX6DL_PAD_GPIO_16__SPDIF_IN 0x214 0x5e4 0x8f0 0x4 0x2 +#define MX6DL_PAD_GPIO_16__GPIO7_IO11 0x214 0x5e4 0x000 0x5 0x0 +#define MX6DL_PAD_GPIO_16__I2C3_SDA 0x214 0x5e4 0x87c 0x6 0x1 +#define MX6DL_PAD_GPIO_16__JTAG_DE_B 0x214 0x5e4 0x000 0x7 0x0 +#define MX6DL_PAD_GPIO_17__ESAI_TX0 0x218 0x5e8 0x844 0x0 0x0 +#define MX6DL_PAD_GPIO_17__ENET_1588_EVENT3_IN 0x218 0x5e8 0x000 0x1 0x0 +#define MX6DL_PAD_GPIO_17__CCM_PMIC_READY 0x218 0x5e8 0x7d4 0x2 0x1 +#define MX6DL_PAD_GPIO_17__SDMA_EXT_EVENT0 0x218 0x5e8 0x8e8 0x3 0x1 +#define MX6DL_PAD_GPIO_17__SPDIF_OUT 0x218 0x5e8 0x000 0x4 0x0 +#define MX6DL_PAD_GPIO_17__GPIO7_IO12 0x218 0x5e8 0x000 0x5 0x0 +#define MX6DL_PAD_GPIO_18__ESAI_TX1 0x21c 0x5ec 0x848 0x0 0x0 +#define MX6DL_PAD_GPIO_18__ENET_RX_CLK 0x21c 0x5ec 0x814 0x1 0x0 +#define MX6DL_PAD_GPIO_18__SD3_VSELECT 0x21c 0x5ec 0x000 0x2 0x0 +#define MX6DL_PAD_GPIO_18__SDMA_EXT_EVENT1 0x21c 0x5ec 0x8ec 0x3 0x1 +#define MX6DL_PAD_GPIO_18__ASRC_EXT_CLK 0x21c 0x5ec 0x794 0x4 0x1 +#define MX6DL_PAD_GPIO_18__GPIO7_IO13 0x21c 0x5ec 0x000 0x5 0x0 +#define MX6DL_PAD_GPIO_18__SNVS_VIO_5_CTL 0x21c 0x5ec 0x000 0x6 0x0 +#define MX6DL_PAD_GPIO_19__KEY_COL5 0x220 0x5f0 0x8c0 0x0 0x2 +#define MX6DL_PAD_GPIO_19__ENET_1588_EVENT0_OUT 0x220 0x5f0 0x000 0x1 0x0 +#define MX6DL_PAD_GPIO_19__SPDIF_OUT 0x220 0x5f0 0x000 0x2 0x0 +#define MX6DL_PAD_GPIO_19__CCM_CLKO1 0x220 0x5f0 0x000 0x3 0x0 +#define MX6DL_PAD_GPIO_19__ECSPI1_RDY 0x220 0x5f0 0x000 0x4 0x0 +#define MX6DL_PAD_GPIO_19__GPIO4_IO05 0x220 0x5f0 0x000 0x5 0x0 +#define MX6DL_PAD_GPIO_19__ENET_TX_ER 0x220 0x5f0 0x000 0x6 0x0 +#define MX6DL_PAD_GPIO_2__ESAI_TX_FS 0x224 0x5f4 0x830 0x0 0x1 +#define MX6DL_PAD_GPIO_2__KEY_ROW6 0x224 0x5f4 0x8d0 0x2 0x1 +#define MX6DL_PAD_GPIO_2__GPIO1_IO02 0x224 0x5f4 0x000 0x5 0x0 +#define MX6DL_PAD_GPIO_2__SD2_WP 0x224 0x5f4 0x000 0x6 0x0 +#define MX6DL_PAD_GPIO_2__MLB_DATA 0x224 0x5f4 0x8e0 0x7 0x1 +#define MX6DL_PAD_GPIO_3__ESAI_RX_HF_CLK 0x228 0x5f8 0x834 0x0 0x1 +#define MX6DL_PAD_GPIO_3__I2C3_SCL 0x228 0x5f8 0x878 0x2 0x1 +#define MX6DL_PAD_GPIO_3__XTALOSC_REF_CLK_24M 0x228 0x5f8 0x000 0x3 0x0 +#define MX6DL_PAD_GPIO_3__CCM_CLKO2 0x228 0x5f8 0x000 0x4 0x0 +#define MX6DL_PAD_GPIO_3__GPIO1_IO03 0x228 0x5f8 0x000 0x5 0x0 +#define MX6DL_PAD_GPIO_3__USB_H1_OC 0x228 0x5f8 0x924 0x6 0x1 +#define MX6DL_PAD_GPIO_3__MLB_CLK 0x228 0x5f8 0x8dc 0x7 0x1 +#define MX6DL_PAD_GPIO_4__ESAI_TX_HF_CLK 0x22c 0x5fc 0x838 0x0 0x1 +#define MX6DL_PAD_GPIO_4__KEY_COL7 0x22c 0x5fc 0x8c8 0x2 0x1 +#define MX6DL_PAD_GPIO_4__GPIO1_IO04 0x22c 0x5fc 0x000 0x5 0x0 +#define MX6DL_PAD_GPIO_4__SD2_CD_B 0x22c 0x5fc 0x000 0x6 0x0 +#define MX6DL_PAD_GPIO_5__ESAI_TX2_RX3 0x230 0x600 0x84c 0x0 0x1 +#define MX6DL_PAD_GPIO_5__KEY_ROW7 0x230 0x600 0x8d4 0x2 0x1 +#define MX6DL_PAD_GPIO_5__CCM_CLKO1 0x230 0x600 0x000 0x3 0x0 +#define MX6DL_PAD_GPIO_5__GPIO1_IO05 0x230 0x600 0x000 0x5 0x0 +#define MX6DL_PAD_GPIO_5__I2C3_SCL 0x230 0x600 0x878 0x6 0x2 +#define MX6DL_PAD_GPIO_5__ARM_EVENTI 0x230 0x600 0x000 0x7 0x0 +#define MX6DL_PAD_GPIO_6__ESAI_TX_CLK 0x234 0x604 0x840 0x0 0x1 +#define MX6DL_PAD_GPIO_6__I2C3_SDA 0x234 0x604 0x87c 0x2 0x2 +#define MX6DL_PAD_GPIO_6__GPIO1_IO06 0x234 0x604 0x000 0x5 0x0 +#define MX6DL_PAD_GPIO_6__SD2_LCTL 0x234 0x604 0x000 0x6 0x0 +#define MX6DL_PAD_GPIO_6__MLB_SIG 0x234 0x604 0x8e4 0x7 0x1 +#define MX6DL_PAD_GPIO_7__ESAI_TX4_RX1 0x238 0x608 0x854 0x0 0x1 +#define MX6DL_PAD_GPIO_7__EPIT1_OUT 0x238 0x608 0x000 0x2 0x0 +#define MX6DL_PAD_GPIO_7__FLEXCAN1_TX 0x238 0x608 0x000 0x3 0x0 +#define MX6DL_PAD_GPIO_7__UART2_TX_DATA 0x238 0x608 0x000 0x4 0x0 +#define MX6DL_PAD_GPIO_7__UART2_RX_DATA 0x238 0x608 0x904 0x4 0x2 +#define MX6DL_PAD_GPIO_7__GPIO1_IO07 0x238 0x608 0x000 0x5 0x0 +#define MX6DL_PAD_GPIO_7__SPDIF_LOCK 0x238 0x608 0x000 0x6 0x0 +#define MX6DL_PAD_GPIO_7__USB_OTG_HOST_MODE 0x238 0x608 0x000 0x7 0x0 +#define MX6DL_PAD_GPIO_7__I2C4_SCL 0x238 0x608 0x880 0x8 0x1 +#define MX6DL_PAD_GPIO_8__ESAI_TX5_RX0 0x23c 0x60c 0x858 0x0 0x1 +#define MX6DL_PAD_GPIO_8__XTALOSC_REF_CLK_32K 0x23c 0x60c 0x000 0x1 0x0 +#define MX6DL_PAD_GPIO_8__EPIT2_OUT 0x23c 0x60c 0x000 0x2 0x0 +#define MX6DL_PAD_GPIO_8__FLEXCAN1_RX 0x23c 0x60c 0x7c8 0x3 0x0 +#define MX6DL_PAD_GPIO_8__UART2_RX_DATA 0x23c 0x60c 0x904 0x4 0x3 +#define MX6DL_PAD_GPIO_8__UART2_TX_DATA 0x23c 0x60c 0x000 0x4 0x0 +#define MX6DL_PAD_GPIO_8__GPIO1_IO08 0x23c 0x60c 0x000 0x5 0x0 +#define MX6DL_PAD_GPIO_8__SPDIF_SR_CLK 0x23c 0x60c 0x000 0x6 0x0 +#define MX6DL_PAD_GPIO_8__USB_OTG_PWR_CTL_WAKE 0x23c 0x60c 0x000 0x7 0x0 +#define MX6DL_PAD_GPIO_8__I2C4_SDA 0x23c 0x60c 0x884 0x8 0x1 +#define MX6DL_PAD_GPIO_9__ESAI_RX_FS 0x240 0x610 0x82c 0x0 0x1 +#define MX6DL_PAD_GPIO_9__WDOG1_B 0x240 0x610 0x000 0x1 0x0 +#define MX6DL_PAD_GPIO_9__KEY_COL6 0x240 0x610 0x8c4 0x2 0x1 +#define MX6DL_PAD_GPIO_9__CCM_REF_EN_B 0x240 0x610 0x000 0x3 0x0 +#define MX6DL_PAD_GPIO_9__PWM1_OUT 0x240 0x610 0x000 0x4 0x0 +#define MX6DL_PAD_GPIO_9__GPIO1_IO09 0x240 0x610 0x000 0x5 0x0 +#define MX6DL_PAD_GPIO_9__SD1_WP 0x240 0x610 0x92c 0x6 0x1 +#define MX6DL_PAD_KEY_COL0__ECSPI1_SCLK 0x244 0x62c 0x7d8 0x0 0x3 +#define MX6DL_PAD_KEY_COL0__ENET_RX_DATA3 0x244 0x62c 0x824 0x1 0x0 +#define MX6DL_PAD_KEY_COL0__AUD5_TXC 0x244 0x62c 0x7c0 0x2 0x1 +#define MX6DL_PAD_KEY_COL0__KEY_COL0 0x244 0x62c 0x000 0x3 0x0 +#define MX6DL_PAD_KEY_COL0__UART4_TX_DATA 0x244 0x62c 0x000 0x4 0x0 +#define MX6DL_PAD_KEY_COL0__UART4_RX_DATA 0x244 0x62c 0x914 0x4 0x2 +#define MX6DL_PAD_KEY_COL0__GPIO4_IO06 0x244 0x62c 0x000 0x5 0x0 +#define MX6DL_PAD_KEY_COL0__DCIC1_OUT 0x244 0x62c 0x000 0x6 0x0 +#define MX6DL_PAD_KEY_COL1__ECSPI1_MISO 0x248 0x630 0x7dc 0x0 0x3 +#define MX6DL_PAD_KEY_COL1__ENET_MDIO 0x248 0x630 0x810 0x1 0x1 +#define MX6DL_PAD_KEY_COL1__AUD5_TXFS 0x248 0x630 0x7c4 0x2 0x1 +#define MX6DL_PAD_KEY_COL1__KEY_COL1 0x248 0x630 0x000 0x3 0x0 +#define MX6DL_PAD_KEY_COL1__UART5_TX_DATA 0x248 0x630 0x000 0x4 0x0 +#define MX6DL_PAD_KEY_COL1__UART5_RX_DATA 0x248 0x630 0x91c 0x4 0x2 +#define MX6DL_PAD_KEY_COL1__GPIO4_IO08 0x248 0x630 0x000 0x5 0x0 +#define MX6DL_PAD_KEY_COL1__SD1_VSELECT 0x248 0x630 0x000 0x6 0x0 +#define MX6DL_PAD_KEY_COL2__ECSPI1_SS1 0x24c 0x634 0x7e8 0x0 0x2 +#define MX6DL_PAD_KEY_COL2__ENET_RX_DATA2 0x24c 0x634 0x820 0x1 0x0 +#define MX6DL_PAD_KEY_COL2__FLEXCAN1_TX 0x24c 0x634 0x000 0x2 0x0 +#define MX6DL_PAD_KEY_COL2__KEY_COL2 0x24c 0x634 0x000 0x3 0x0 +#define MX6DL_PAD_KEY_COL2__ENET_MDC 0x24c 0x634 0x000 0x4 0x0 +#define MX6DL_PAD_KEY_COL2__GPIO4_IO10 0x24c 0x634 0x000 0x5 0x0 +#define MX6DL_PAD_KEY_COL2__USB_H1_PWR_CTL_WAKE 0x24c 0x634 0x000 0x6 0x0 +#define MX6DL_PAD_KEY_COL3__ECSPI1_SS3 0x250 0x638 0x7f0 0x0 0x1 +#define MX6DL_PAD_KEY_COL3__ENET_CRS 0x250 0x638 0x000 0x1 0x0 +#define MX6DL_PAD_KEY_COL3__HDMI_TX_DDC_SCL 0x250 0x638 0x860 0x2 0x1 +#define MX6DL_PAD_KEY_COL3__KEY_COL3 0x250 0x638 0x000 0x3 0x0 +#define MX6DL_PAD_KEY_COL3__I2C2_SCL 0x250 0x638 0x870 0x4 0x1 +#define MX6DL_PAD_KEY_COL3__GPIO4_IO12 0x250 0x638 0x000 0x5 0x0 +#define MX6DL_PAD_KEY_COL3__SPDIF_IN 0x250 0x638 0x8f0 0x6 0x3 +#define MX6DL_PAD_KEY_COL4__FLEXCAN2_TX 0x254 0x63c 0x000 0x0 0x0 +#define MX6DL_PAD_KEY_COL4__IPU1_SISG4 0x254 0x63c 0x000 0x1 0x0 +#define MX6DL_PAD_KEY_COL4__USB_OTG_OC 0x254 0x63c 0x920 0x2 0x1 +#define MX6DL_PAD_KEY_COL4__KEY_COL4 0x254 0x63c 0x000 0x3 0x0 +#define MX6DL_PAD_KEY_COL4__UART5_RTS_B 0x254 0x63c 0x918 0x4 0x2 +#define MX6DL_PAD_KEY_COL4__UART5_CTS_B 0x254 0x63c 0x000 0x4 0x0 +#define MX6DL_PAD_KEY_COL4__GPIO4_IO14 0x254 0x63c 0x000 0x5 0x0 +#define MX6DL_PAD_KEY_ROW0__ECSPI1_MOSI 0x258 0x640 0x7e0 0x0 0x3 +#define MX6DL_PAD_KEY_ROW0__ENET_TX_DATA3 0x258 0x640 0x000 0x1 0x0 +#define MX6DL_PAD_KEY_ROW0__AUD5_TXD 0x258 0x640 0x7b4 0x2 0x1 +#define MX6DL_PAD_KEY_ROW0__KEY_ROW0 0x258 0x640 0x000 0x3 0x0 +#define MX6DL_PAD_KEY_ROW0__UART4_RX_DATA 0x258 0x640 0x914 0x4 0x3 +#define MX6DL_PAD_KEY_ROW0__UART4_TX_DATA 0x258 0x640 0x000 0x4 0x0 +#define MX6DL_PAD_KEY_ROW0__GPIO4_IO07 0x258 0x640 0x000 0x5 0x0 +#define MX6DL_PAD_KEY_ROW0__DCIC2_OUT 0x258 0x640 0x000 0x6 0x0 +#define MX6DL_PAD_KEY_ROW1__ECSPI1_SS0 0x25c 0x644 0x7e4 0x0 0x3 +#define MX6DL_PAD_KEY_ROW1__ENET_COL 0x25c 0x644 0x000 0x1 0x0 +#define MX6DL_PAD_KEY_ROW1__AUD5_RXD 0x25c 0x644 0x7b0 0x2 0x1 +#define MX6DL_PAD_KEY_ROW1__KEY_ROW1 0x25c 0x644 0x000 0x3 0x0 +#define MX6DL_PAD_KEY_ROW1__UART5_RX_DATA 0x25c 0x644 0x91c 0x4 0x3 +#define MX6DL_PAD_KEY_ROW1__UART5_TX_DATA 0x25c 0x644 0x000 0x4 0x0 +#define MX6DL_PAD_KEY_ROW1__GPIO4_IO09 0x25c 0x644 0x000 0x5 0x0 +#define MX6DL_PAD_KEY_ROW1__SD2_VSELECT 0x25c 0x644 0x000 0x6 0x0 +#define MX6DL_PAD_KEY_ROW2__ECSPI1_SS2 0x260 0x648 0x7ec 0x0 0x1 +#define MX6DL_PAD_KEY_ROW2__ENET_TX_DATA2 0x260 0x648 0x000 0x1 0x0 +#define MX6DL_PAD_KEY_ROW2__FLEXCAN1_RX 0x260 0x648 0x7c8 0x2 0x1 +#define MX6DL_PAD_KEY_ROW2__KEY_ROW2 0x260 0x648 0x000 0x3 0x0 +#define MX6DL_PAD_KEY_ROW2__SD2_VSELECT 0x260 0x648 0x000 0x4 0x0 +#define MX6DL_PAD_KEY_ROW2__GPIO4_IO11 0x260 0x648 0x000 0x5 0x0 +#define MX6DL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x260 0x648 0x85c 0x6 0x1 +#define MX6DL_PAD_KEY_ROW3__ASRC_EXT_CLK 0x264 0x64c 0x794 0x1 0x2 +#define MX6DL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA 0x264 0x64c 0x864 0x2 0x1 +#define MX6DL_PAD_KEY_ROW3__KEY_ROW3 0x264 0x64c 0x000 0x3 0x0 +#define MX6DL_PAD_KEY_ROW3__I2C2_SDA 0x264 0x64c 0x874 0x4 0x1 +#define MX6DL_PAD_KEY_ROW3__GPIO4_IO13 0x264 0x64c 0x000 0x5 0x0 +#define MX6DL_PAD_KEY_ROW3__SD1_VSELECT 0x264 0x64c 0x000 0x6 0x0 +#define MX6DL_PAD_KEY_ROW4__FLEXCAN2_RX 0x268 0x650 0x7cc 0x0 0x0 +#define MX6DL_PAD_KEY_ROW4__IPU1_SISG5 0x268 0x650 0x000 0x1 0x0 +#define MX6DL_PAD_KEY_ROW4__USB_OTG_PWR 0x268 0x650 0x000 0x2 0x0 +#define MX6DL_PAD_KEY_ROW4__KEY_ROW4 0x268 0x650 0x000 0x3 0x0 +#define MX6DL_PAD_KEY_ROW4__UART5_CTS_B 0x268 0x650 0x000 0x4 0x0 +#define MX6DL_PAD_KEY_ROW4__UART5_RTS_B 0x268 0x650 0x918 0x4 0x3 +#define MX6DL_PAD_KEY_ROW4__GPIO4_IO15 0x268 0x650 0x000 0x5 0x0 +#define MX6DL_PAD_NANDF_ALE__NAND_ALE 0x26c 0x654 0x000 0x0 0x0 +#define MX6DL_PAD_NANDF_ALE__SD4_RESET 0x26c 0x654 0x000 0x1 0x0 +#define MX6DL_PAD_NANDF_ALE__GPIO6_IO08 0x26c 0x654 0x000 0x5 0x0 +#define MX6DL_PAD_NANDF_CLE__NAND_CLE 0x270 0x658 0x000 0x0 0x0 +#define MX6DL_PAD_NANDF_CLE__GPIO6_IO07 0x270 0x658 0x000 0x5 0x0 +#define MX6DL_PAD_NANDF_CS0__NAND_CE0_B 0x274 0x65c 0x000 0x0 0x0 +#define MX6DL_PAD_NANDF_CS0__GPIO6_IO11 0x274 0x65c 0x000 0x5 0x0 +#define MX6DL_PAD_NANDF_CS1__NAND_CE1_B 0x278 0x660 0x000 0x0 0x0 +#define MX6DL_PAD_NANDF_CS1__SD4_VSELECT 0x278 0x660 0x000 0x1 0x0 +#define MX6DL_PAD_NANDF_CS1__SD3_VSELECT 0x278 0x660 0x000 0x2 0x0 +#define MX6DL_PAD_NANDF_CS1__GPIO6_IO14 0x278 0x660 0x000 0x5 0x0 +#define MX6DL_PAD_NANDF_CS2__NAND_CE2_B 0x27c 0x664 0x000 0x0 0x0 +#define MX6DL_PAD_NANDF_CS2__IPU1_SISG0 0x27c 0x664 0x000 0x1 0x0 +#define MX6DL_PAD_NANDF_CS2__ESAI_TX0 0x27c 0x664 0x844 0x2 0x1 +#define MX6DL_PAD_NANDF_CS2__EIM_CRE 0x27c 0x664 0x000 0x3 0x0 +#define MX6DL_PAD_NANDF_CS2__CCM_CLKO2 0x27c 0x664 0x000 0x4 0x0 +#define MX6DL_PAD_NANDF_CS2__GPIO6_IO15 0x27c 0x664 0x000 0x5 0x0 +#define MX6DL_PAD_NANDF_CS3__NAND_CE3_B 0x280 0x668 0x000 0x0 0x0 +#define MX6DL_PAD_NANDF_CS3__IPU1_SISG1 0x280 0x668 0x000 0x1 0x0 +#define MX6DL_PAD_NANDF_CS3__ESAI_TX1 0x280 0x668 0x848 0x2 0x1 +#define MX6DL_PAD_NANDF_CS3__EIM_ADDR26 0x280 0x668 0x000 0x3 0x0 +#define MX6DL_PAD_NANDF_CS3__GPIO6_IO16 0x280 0x668 0x000 0x5 0x0 +#define MX6DL_PAD_NANDF_CS3__I2C4_SDA 0x280 0x668 0x884 0x9 0x2 +#define MX6DL_PAD_NANDF_D0__NAND_DATA00 0x284 0x66c 0x000 0x0 0x0 +#define MX6DL_PAD_NANDF_D0__SD1_DATA4 0x284 0x66c 0x000 0x1 0x0 +#define MX6DL_PAD_NANDF_D0__GPIO2_IO00 0x284 0x66c 0x000 0x5 0x0 +#define MX6DL_PAD_NANDF_D1__NAND_DATA01 0x288 0x670 0x000 0x0 0x0 +#define MX6DL_PAD_NANDF_D1__SD1_DATA5 0x288 0x670 0x000 0x1 0x0 +#define MX6DL_PAD_NANDF_D1__GPIO2_IO01 0x288 0x670 0x000 0x5 0x0 +#define MX6DL_PAD_NANDF_D2__NAND_DATA02 0x28c 0x674 0x000 0x0 0x0 +#define MX6DL_PAD_NANDF_D2__SD1_DATA6 0x28c 0x674 0x000 0x1 0x0 +#define MX6DL_PAD_NANDF_D2__GPIO2_IO02 0x28c 0x674 0x000 0x5 0x0 +#define MX6DL_PAD_NANDF_D3__NAND_DATA03 0x290 0x678 0x000 0x0 0x0 +#define MX6DL_PAD_NANDF_D3__SD1_DATA7 0x290 0x678 0x000 0x1 0x0 +#define MX6DL_PAD_NANDF_D3__GPIO2_IO03 0x290 0x678 0x000 0x5 0x0 +#define MX6DL_PAD_NANDF_D4__NAND_DATA04 0x294 0x67c 0x000 0x0 0x0 +#define MX6DL_PAD_NANDF_D4__SD2_DATA4 0x294 0x67c 0x000 0x1 0x0 +#define MX6DL_PAD_NANDF_D4__GPIO2_IO04 0x294 0x67c 0x000 0x5 0x0 +#define MX6DL_PAD_NANDF_D5__NAND_DATA05 0x298 0x680 0x000 0x0 0x0 +#define MX6DL_PAD_NANDF_D5__SD2_DATA5 0x298 0x680 0x000 0x1 0x0 +#define MX6DL_PAD_NANDF_D5__GPIO2_IO05 0x298 0x680 0x000 0x5 0x0 +#define MX6DL_PAD_NANDF_D6__NAND_DATA06 0x29c 0x684 0x000 0x0 0x0 +#define MX6DL_PAD_NANDF_D6__SD2_DATA6 0x29c 0x684 0x000 0x1 0x0 +#define MX6DL_PAD_NANDF_D6__GPIO2_IO06 0x29c 0x684 0x000 0x5 0x0 +#define MX6DL_PAD_NANDF_D7__NAND_DATA07 0x2a0 0x688 0x000 0x0 0x0 +#define MX6DL_PAD_NANDF_D7__SD2_DATA7 0x2a0 0x688 0x000 0x1 0x0 +#define MX6DL_PAD_NANDF_D7__GPIO2_IO07 0x2a0 0x688 0x000 0x5 0x0 +#define MX6DL_PAD_NANDF_RB0__NAND_READY_B 0x2a4 0x68c 0x000 0x0 0x0 +#define MX6DL_PAD_NANDF_RB0__GPIO6_IO10 0x2a4 0x68c 0x000 0x5 0x0 +#define MX6DL_PAD_NANDF_WP_B__NAND_WP_B 0x2a8 0x690 0x000 0x0 0x0 +#define MX6DL_PAD_NANDF_WP_B__GPIO6_IO09 0x2a8 0x690 0x000 0x5 0x0 +#define MX6DL_PAD_NANDF_WP_B__I2C4_SCL 0x2a8 0x690 0x880 0x9 0x2 +#define MX6DL_PAD_RGMII_RD0__HSI_RX_READY 0x2ac 0x694 0x000 0x0 0x0 +#define MX6DL_PAD_RGMII_RD0__RGMII_RD0 0x2ac 0x694 0x818 0x1 0x1 +#define MX6DL_PAD_RGMII_RD0__GPIO6_IO25 0x2ac 0x694 0x000 0x5 0x0 +#define MX6DL_PAD_RGMII_RD1__HSI_TX_FLAG 0x2b0 0x698 0x000 0x0 0x0 +#define MX6DL_PAD_RGMII_RD1__RGMII_RD1 0x2b0 0x698 0x81c 0x1 0x1 +#define MX6DL_PAD_RGMII_RD1__GPIO6_IO27 0x2b0 0x698 0x000 0x5 0x0 +#define MX6DL_PAD_RGMII_RD2__HSI_TX_DATA 0x2b4 0x69c 0x000 0x0 0x0 +#define MX6DL_PAD_RGMII_RD2__RGMII_RD2 0x2b4 0x69c 0x820 0x1 0x1 +#define MX6DL_PAD_RGMII_RD2__GPIO6_IO28 0x2b4 0x69c 0x000 0x5 0x0 +#define MX6DL_PAD_RGMII_RD3__HSI_TX_WAKE 0x2b8 0x6a0 0x000 0x0 0x0 +#define MX6DL_PAD_RGMII_RD3__RGMII_RD3 0x2b8 0x6a0 0x824 0x1 0x1 +#define MX6DL_PAD_RGMII_RD3__GPIO6_IO29 0x2b8 0x6a0 0x000 0x5 0x0 +#define MX6DL_PAD_RGMII_RX_CTL__USB_H3_DATA 0x2bc 0x6a4 0x000 0x0 0x0 +#define MX6DL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x2bc 0x6a4 0x828 0x1 0x1 +#define MX6DL_PAD_RGMII_RX_CTL__GPIO6_IO24 0x2bc 0x6a4 0x000 0x5 0x0 +#define MX6DL_PAD_RGMII_RXC__USB_H3_STROBE 0x2c0 0x6a8 0x000 0x0 0x0 +#define MX6DL_PAD_RGMII_RXC__RGMII_RXC 0x2c0 0x6a8 0x814 0x1 0x1 +#define MX6DL_PAD_RGMII_RXC__GPIO6_IO30 0x2c0 0x6a8 0x000 0x5 0x0 +#define MX6DL_PAD_RGMII_TD0__HSI_TX_READY 0x2c4 0x6ac 0x000 0x0 0x0 +#define MX6DL_PAD_RGMII_TD0__RGMII_TD0 0x2c4 0x6ac 0x000 0x1 0x0 +#define MX6DL_PAD_RGMII_TD0__GPIO6_IO20 0x2c4 0x6ac 0x000 0x5 0x0 +#define MX6DL_PAD_RGMII_TD1__HSI_RX_FLAG 0x2c8 0x6b0 0x000 0x0 0x0 +#define MX6DL_PAD_RGMII_TD1__RGMII_TD1 0x2c8 0x6b0 0x000 0x1 0x0 +#define MX6DL_PAD_RGMII_TD1__GPIO6_IO21 0x2c8 0x6b0 0x000 0x5 0x0 +#define MX6DL_PAD_RGMII_TD2__HSI_RX_DATA 0x2cc 0x6b4 0x000 0x0 0x0 +#define MX6DL_PAD_RGMII_TD2__RGMII_TD2 0x2cc 0x6b4 0x000 0x1 0x0 +#define MX6DL_PAD_RGMII_TD2__GPIO6_IO22 0x2cc 0x6b4 0x000 0x5 0x0 +#define MX6DL_PAD_RGMII_TD3__HSI_RX_WAKE 0x2d0 0x6b8 0x000 0x0 0x0 +#define MX6DL_PAD_RGMII_TD3__RGMII_TD3 0x2d0 0x6b8 0x000 0x1 0x0 +#define MX6DL_PAD_RGMII_TD3__GPIO6_IO23 0x2d0 0x6b8 0x000 0x5 0x0 +#define MX6DL_PAD_RGMII_TX_CTL__USB_H2_STROBE 0x2d4 0x6bc 0x000 0x0 0x0 +#define MX6DL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x2d4 0x6bc 0x000 0x1 0x0 +#define MX6DL_PAD_RGMII_TX_CTL__GPIO6_IO26 0x2d4 0x6bc 0x000 0x5 0x0 +#define MX6DL_PAD_RGMII_TX_CTL__ENET_REF_CLK 0x2d4 0x6bc 0x80c 0x7 0x1 +#define MX6DL_PAD_RGMII_TXC__USB_H2_DATA 0x2d8 0x6c0 0x000 0x0 0x0 +#define MX6DL_PAD_RGMII_TXC__RGMII_TXC 0x2d8 0x6c0 0x000 0x1 0x0 +#define MX6DL_PAD_RGMII_TXC__SPDIF_EXT_CLK 0x2d8 0x6c0 0x8f4 0x2 0x1 +#define MX6DL_PAD_RGMII_TXC__GPIO6_IO19 0x2d8 0x6c0 0x000 0x5 0x0 +#define MX6DL_PAD_RGMII_TXC__XTALOSC_REF_CLK_24M 0x2d8 0x6c0 0x000 0x7 0x0 +#define MX6DL_PAD_SD1_CLK__SD1_CLK 0x2dc 0x6c4 0x928 0x0 0x1 +#define MX6DL_PAD_SD1_CLK__GPT_CLKIN 0x2dc 0x6c4 0x000 0x3 0x0 +#define MX6DL_PAD_SD1_CLK__GPIO1_IO20 0x2dc 0x6c4 0x000 0x5 0x0 +#define MX6DL_PAD_SD1_CMD__SD1_CMD 0x2e0 0x6c8 0x000 0x0 0x0 +#define MX6DL_PAD_SD1_CMD__PWM4_OUT 0x2e0 0x6c8 0x000 0x2 0x0 +#define MX6DL_PAD_SD1_CMD__GPT_COMPARE1 0x2e0 0x6c8 0x000 0x3 0x0 +#define MX6DL_PAD_SD1_CMD__GPIO1_IO18 0x2e0 0x6c8 0x000 0x5 0x0 +#define MX6DL_PAD_SD1_DAT0__SD1_DATA0 0x2e4 0x6cc 0x000 0x0 0x0 +#define MX6DL_PAD_SD1_DAT0__GPT_CAPTURE1 0x2e4 0x6cc 0x000 0x3 0x0 +#define MX6DL_PAD_SD1_DAT0__GPIO1_IO16 0x2e4 0x6cc 0x000 0x5 0x0 +#define MX6DL_PAD_SD1_DAT1__SD1_DATA1 0x2e8 0x6d0 0x000 0x0 0x0 +#define MX6DL_PAD_SD1_DAT1__PWM3_OUT 0x2e8 0x6d0 0x000 0x2 0x0 +#define MX6DL_PAD_SD1_DAT1__GPT_CAPTURE2 0x2e8 0x6d0 0x000 0x3 0x0 +#define MX6DL_PAD_SD1_DAT1__GPIO1_IO17 0x2e8 0x6d0 0x000 0x5 0x0 +#define MX6DL_PAD_SD1_DAT2__SD1_DATA2 0x2ec 0x6d4 0x000 0x0 0x0 +#define MX6DL_PAD_SD1_DAT2__GPT_COMPARE2 0x2ec 0x6d4 0x000 0x2 0x0 +#define MX6DL_PAD_SD1_DAT2__PWM2_OUT 0x2ec 0x6d4 0x000 0x3 0x0 +#define MX6DL_PAD_SD1_DAT2__WDOG1_B 0x2ec 0x6d4 0x000 0x4 0x0 +#define MX6DL_PAD_SD1_DAT2__GPIO1_IO19 0x2ec 0x6d4 0x000 0x5 0x0 +#define MX6DL_PAD_SD1_DAT2__WDOG1_RESET_B_DEB 0x2ec 0x6d4 0x000 0x6 0x0 +#define MX6DL_PAD_SD1_DAT3__SD1_DATA3 0x2f0 0x6d8 0x000 0x0 0x0 +#define MX6DL_PAD_SD1_DAT3__GPT_COMPARE3 0x2f0 0x6d8 0x000 0x2 0x0 +#define MX6DL_PAD_SD1_DAT3__PWM1_OUT 0x2f0 0x6d8 0x000 0x3 0x0 +#define MX6DL_PAD_SD1_DAT3__WDOG2_B 0x2f0 0x6d8 0x000 0x4 0x0 +#define MX6DL_PAD_SD1_DAT3__GPIO1_IO21 0x2f0 0x6d8 0x000 0x5 0x0 +#define MX6DL_PAD_SD1_DAT3__WDOG2_RESET_B_DEB 0x2f0 0x6d8 0x000 0x6 0x0 +#define MX6DL_PAD_SD2_CLK__SD2_CLK 0x2f4 0x6dc 0x930 0x0 0x1 +#define MX6DL_PAD_SD2_CLK__KEY_COL5 0x2f4 0x6dc 0x8c0 0x2 0x3 +#define MX6DL_PAD_SD2_CLK__AUD4_RXFS 0x2f4 0x6dc 0x7a4 0x3 0x1 +#define MX6DL_PAD_SD2_CLK__GPIO1_IO10 0x2f4 0x6dc 0x000 0x5 0x0 +#define MX6DL_PAD_SD2_CMD__SD2_CMD 0x2f8 0x6e0 0x000 0x0 0x0 +#define MX6DL_PAD_SD2_CMD__KEY_ROW5 0x2f8 0x6e0 0x8cc 0x2 0x2 +#define MX6DL_PAD_SD2_CMD__AUD4_RXC 0x2f8 0x6e0 0x7a0 0x3 0x1 +#define MX6DL_PAD_SD2_CMD__GPIO1_IO11 0x2f8 0x6e0 0x000 0x5 0x0 +#define MX6DL_PAD_SD2_DAT0__SD2_DATA0 0x2fc 0x6e4 0x000 0x0 0x0 +#define MX6DL_PAD_SD2_DAT0__AUD4_RXD 0x2fc 0x6e4 0x798 0x3 0x1 +#define MX6DL_PAD_SD2_DAT0__KEY_ROW7 0x2fc 0x6e4 0x8d4 0x4 0x2 +#define MX6DL_PAD_SD2_DAT0__GPIO1_IO15 0x2fc 0x6e4 0x000 0x5 0x0 +#define MX6DL_PAD_SD2_DAT0__DCIC2_OUT 0x2fc 0x6e4 0x000 0x6 0x0 +#define MX6DL_PAD_SD2_DAT1__SD2_DATA1 0x300 0x6e8 0x000 0x0 0x0 +#define MX6DL_PAD_SD2_DAT1__EIM_CS2_B 0x300 0x6e8 0x000 0x2 0x0 +#define MX6DL_PAD_SD2_DAT1__AUD4_TXFS 0x300 0x6e8 0x7ac 0x3 0x1 +#define MX6DL_PAD_SD2_DAT1__KEY_COL7 0x300 0x6e8 0x8c8 0x4 0x2 +#define MX6DL_PAD_SD2_DAT1__GPIO1_IO14 0x300 0x6e8 0x000 0x5 0x0 +#define MX6DL_PAD_SD2_DAT2__SD2_DATA2 0x304 0x6ec 0x000 0x0 0x0 +#define MX6DL_PAD_SD2_DAT2__EIM_CS3_B 0x304 0x6ec 0x000 0x2 0x0 +#define MX6DL_PAD_SD2_DAT2__AUD4_TXD 0x304 0x6ec 0x79c 0x3 0x1 +#define MX6DL_PAD_SD2_DAT2__KEY_ROW6 0x304 0x6ec 0x8d0 0x4 0x2 +#define MX6DL_PAD_SD2_DAT2__GPIO1_IO13 0x304 0x6ec 0x000 0x5 0x0 +#define MX6DL_PAD_SD2_DAT3__SD2_DATA3 0x308 0x6f0 0x000 0x0 0x0 +#define MX6DL_PAD_SD2_DAT3__KEY_COL6 0x308 0x6f0 0x8c4 0x2 0x2 +#define MX6DL_PAD_SD2_DAT3__AUD4_TXC 0x308 0x6f0 0x7a8 0x3 0x1 +#define MX6DL_PAD_SD2_DAT3__GPIO1_IO12 0x308 0x6f0 0x000 0x5 0x0 +#define MX6DL_PAD_SD3_CLK__SD3_CLK 0x30c 0x6f4 0x934 0x0 0x1 +#define MX6DL_PAD_SD3_CLK__UART2_RTS_B 0x30c 0x6f4 0x900 0x1 0x2 +#define MX6DL_PAD_SD3_CLK__UART2_CTS_B 0x30c 0x6f4 0x000 0x1 0x0 +#define MX6DL_PAD_SD3_CLK__FLEXCAN1_RX 0x30c 0x6f4 0x7c8 0x2 0x2 +#define MX6DL_PAD_SD3_CLK__GPIO7_IO03 0x30c 0x6f4 0x000 0x5 0x0 +#define MX6DL_PAD_SD3_CMD__SD3_CMD 0x310 0x6f8 0x000 0x0 0x0 +#define MX6DL_PAD_SD3_CMD__UART2_CTS_B 0x310 0x6f8 0x000 0x1 0x0 +#define MX6DL_PAD_SD3_CMD__UART2_RTS_B 0x310 0x6f8 0x900 0x1 0x3 +#define MX6DL_PAD_SD3_CMD__FLEXCAN1_TX 0x310 0x6f8 0x000 0x2 0x0 +#define MX6DL_PAD_SD3_CMD__GPIO7_IO02 0x310 0x6f8 0x000 0x5 0x0 +#define MX6DL_PAD_SD3_DAT0__SD3_DATA0 0x314 0x6fc 0x000 0x0 0x0 +#define MX6DL_PAD_SD3_DAT0__UART1_CTS_B 0x314 0x6fc 0x000 0x1 0x0 +#define MX6DL_PAD_SD3_DAT0__UART1_RTS_B 0x314 0x6fc 0x8f8 0x1 0x2 +#define MX6DL_PAD_SD3_DAT0__FLEXCAN2_TX 0x314 0x6fc 0x000 0x2 0x0 +#define MX6DL_PAD_SD3_DAT0__GPIO7_IO04 0x314 0x6fc 0x000 0x5 0x0 +#define MX6DL_PAD_SD3_DAT1__SD3_DATA1 0x318 0x700 0x000 0x0 0x0 +#define MX6DL_PAD_SD3_DAT1__UART1_RTS_B 0x318 0x700 0x8f8 0x1 0x3 +#define MX6DL_PAD_SD3_DAT1__UART1_CTS_B 0x318 0x700 0x000 0x1 0x0 +#define MX6DL_PAD_SD3_DAT1__FLEXCAN2_RX 0x318 0x700 0x7cc 0x2 0x1 +#define MX6DL_PAD_SD3_DAT1__GPIO7_IO05 0x318 0x700 0x000 0x5 0x0 +#define MX6DL_PAD_SD3_DAT2__SD3_DATA2 0x31c 0x704 0x000 0x0 0x0 +#define MX6DL_PAD_SD3_DAT2__GPIO7_IO06 0x31c 0x704 0x000 0x5 0x0 +#define MX6DL_PAD_SD3_DAT3__SD3_DATA3 0x320 0x708 0x000 0x0 0x0 +#define MX6DL_PAD_SD3_DAT3__UART3_CTS_B 0x320 0x708 0x000 0x1 0x0 +#define MX6DL_PAD_SD3_DAT3__UART3_RTS_B 0x320 0x708 0x908 0x1 0x4 +#define MX6DL_PAD_SD3_DAT3__GPIO7_IO07 0x320 0x708 0x000 0x5 0x0 +#define MX6DL_PAD_SD3_DAT4__SD3_DATA4 0x324 0x70c 0x000 0x0 0x0 +#define MX6DL_PAD_SD3_DAT4__UART2_RX_DATA 0x324 0x70c 0x904 0x1 0x4 +#define MX6DL_PAD_SD3_DAT4__UART2_TX_DATA 0x324 0x70c 0x000 0x1 0x0 +#define MX6DL_PAD_SD3_DAT4__GPIO7_IO01 0x324 0x70c 0x000 0x5 0x0 +#define MX6DL_PAD_SD3_DAT5__SD3_DATA5 0x328 0x710 0x000 0x0 0x0 +#define MX6DL_PAD_SD3_DAT5__UART2_TX_DATA 0x328 0x710 0x000 0x1 0x0 +#define MX6DL_PAD_SD3_DAT5__UART2_RX_DATA 0x328 0x710 0x904 0x1 0x5 +#define MX6DL_PAD_SD3_DAT5__GPIO7_IO00 0x328 0x710 0x000 0x5 0x0 +#define MX6DL_PAD_SD3_DAT6__SD3_DATA6 0x32c 0x714 0x000 0x0 0x0 +#define MX6DL_PAD_SD3_DAT6__UART1_RX_DATA 0x32c 0x714 0x8fc 0x1 0x2 +#define MX6DL_PAD_SD3_DAT6__UART1_TX_DATA 0x32c 0x714 0x000 0x1 0x0 +#define MX6DL_PAD_SD3_DAT6__GPIO6_IO18 0x32c 0x714 0x000 0x5 0x0 +#define MX6DL_PAD_SD3_DAT7__SD3_DATA7 0x330 0x718 0x000 0x0 0x0 +#define MX6DL_PAD_SD3_DAT7__UART1_TX_DATA 0x330 0x718 0x000 0x1 0x0 +#define MX6DL_PAD_SD3_DAT7__UART1_RX_DATA 0x330 0x718 0x8fc 0x1 0x3 +#define MX6DL_PAD_SD3_DAT7__GPIO6_IO17 0x330 0x718 0x000 0x5 0x0 +#define MX6DL_PAD_SD3_RST__SD3_RESET 0x334 0x71c 0x000 0x0 0x0 +#define MX6DL_PAD_SD3_RST__UART3_RTS_B 0x334 0x71c 0x908 0x1 0x5 +#define MX6DL_PAD_SD3_RST__UART3_CTS_B 0x334 0x71c 0x000 0x1 0x0 +#define MX6DL_PAD_SD3_RST__GPIO7_IO08 0x334 0x71c 0x000 0x5 0x0 +#define MX6DL_PAD_SD4_CLK__SD4_CLK 0x338 0x720 0x938 0x0 0x1 +#define MX6DL_PAD_SD4_CLK__NAND_WE_B 0x338 0x720 0x000 0x1 0x0 +#define MX6DL_PAD_SD4_CLK__UART3_RX_DATA 0x338 0x720 0x90c 0x2 0x2 +#define MX6DL_PAD_SD4_CLK__UART3_TX_DATA 0x338 0x720 0x000 0x2 0x0 +#define MX6DL_PAD_SD4_CLK__GPIO7_IO10 0x338 0x720 0x000 0x5 0x0 +#define MX6DL_PAD_SD4_CMD__SD4_CMD 0x33c 0x724 0x000 0x0 0x0 +#define MX6DL_PAD_SD4_CMD__NAND_RE_B 0x33c 0x724 0x000 0x1 0x0 +#define MX6DL_PAD_SD4_CMD__UART3_TX_DATA 0x33c 0x724 0x000 0x2 0x0 +#define MX6DL_PAD_SD4_CMD__UART3_RX_DATA 0x33c 0x724 0x90c 0x2 0x3 +#define MX6DL_PAD_SD4_CMD__GPIO7_IO09 0x33c 0x724 0x000 0x5 0x0 +#define MX6DL_PAD_SD4_DAT0__SD4_DATA0 0x340 0x728 0x000 0x1 0x0 +#define MX6DL_PAD_SD4_DAT0__NAND_DQS 0x340 0x728 0x000 0x2 0x0 +#define MX6DL_PAD_SD4_DAT0__GPIO2_IO08 0x340 0x728 0x000 0x5 0x0 +#define MX6DL_PAD_SD4_DAT1__SD4_DATA1 0x344 0x72c 0x000 0x1 0x0 +#define MX6DL_PAD_SD4_DAT1__PWM3_OUT 0x344 0x72c 0x000 0x2 0x0 +#define MX6DL_PAD_SD4_DAT1__GPIO2_IO09 0x344 0x72c 0x000 0x5 0x0 +#define MX6DL_PAD_SD4_DAT2__SD4_DATA2 0x348 0x730 0x000 0x1 0x0 +#define MX6DL_PAD_SD4_DAT2__PWM4_OUT 0x348 0x730 0x000 0x2 0x0 +#define MX6DL_PAD_SD4_DAT2__GPIO2_IO10 0x348 0x730 0x000 0x5 0x0 +#define MX6DL_PAD_SD4_DAT3__SD4_DATA3 0x34c 0x734 0x000 0x1 0x0 +#define MX6DL_PAD_SD4_DAT3__GPIO2_IO11 0x34c 0x734 0x000 0x5 0x0 +#define MX6DL_PAD_SD4_DAT4__SD4_DATA4 0x350 0x738 0x000 0x1 0x0 +#define MX6DL_PAD_SD4_DAT4__UART2_RX_DATA 0x350 0x738 0x904 0x2 0x6 +#define MX6DL_PAD_SD4_DAT4__UART2_TX_DATA 0x350 0x738 0x000 0x2 0x0 +#define MX6DL_PAD_SD4_DAT4__GPIO2_IO12 0x350 0x738 0x000 0x5 0x0 +#define MX6DL_PAD_SD4_DAT5__SD4_DATA5 0x354 0x73c 0x000 0x1 0x0 +#define MX6DL_PAD_SD4_DAT5__UART2_RTS_B 0x354 0x73c 0x900 0x2 0x4 +#define MX6DL_PAD_SD4_DAT5__UART2_CTS_B 0x354 0x73c 0x000 0x2 0x0 +#define MX6DL_PAD_SD4_DAT5__GPIO2_IO13 0x354 0x73c 0x000 0x5 0x0 +#define MX6DL_PAD_SD4_DAT6__SD4_DATA6 0x358 0x740 0x000 0x1 0x0 +#define MX6DL_PAD_SD4_DAT6__UART2_CTS_B 0x358 0x740 0x000 0x2 0x0 +#define MX6DL_PAD_SD4_DAT6__UART2_RTS_B 0x358 0x740 0x900 0x2 0x5 +#define MX6DL_PAD_SD4_DAT6__GPIO2_IO14 0x358 0x740 0x000 0x5 0x0 +#define MX6DL_PAD_SD4_DAT7__SD4_DATA7 0x35c 0x744 0x000 0x1 0x0 +#define MX6DL_PAD_SD4_DAT7__UART2_TX_DATA 0x35c 0x744 0x000 0x2 0x0 +#define MX6DL_PAD_SD4_DAT7__UART2_RX_DATA 0x35c 0x744 0x904 0x2 0x7 +#define MX6DL_PAD_SD4_DAT7__GPIO2_IO15 0x35c 0x744 0x000 0x5 0x0 + +#endif /* __DTS_IMX6DL_PINFUNC_H */ diff --git a/arch/arm/boot/dts/imx6dl-sabreauto.dts b/arch/arm/boot/dts/imx6dl-sabreauto.dts new file mode 100644 index 000000000000..7adcec360213 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-sabreauto.dts @@ -0,0 +1,31 @@ +/* + * Copyright (C) 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6qdl-sabreauto.dtsi" + +/ { + model = "Freescale i.MX6 DualLite/Solo SABRE Automotive Board"; + compatible = "fsl,imx6dl-sabreauto", "fsl,imx6dl"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + MX6DL_PAD_NANDF_CS2__GPIO6_IO15 0x80000000 + MX6DL_PAD_SD2_DAT2__GPIO1_IO13 0x80000000 + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6dl-sabresd.dts b/arch/arm/boot/dts/imx6dl-sabresd.dts new file mode 100644 index 000000000000..7efb05db4783 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-sabresd.dts @@ -0,0 +1,35 @@ +/* + * Copyright (C) 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6qdl-sabresd.dtsi" + +/ { + model = "Freescale i.MX6 DualLite SABRE Smart Device Board"; + compatible = "fsl,imx6dl-sabresd", "fsl,imx6dl"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + MX6DL_PAD_GPIO_4__GPIO1_IO04 0x80000000 + MX6DL_PAD_GPIO_5__GPIO1_IO05 0x80000000 + MX6DL_PAD_NANDF_D0__GPIO2_IO00 0x80000000 + MX6DL_PAD_NANDF_D1__GPIO2_IO01 0x80000000 + MX6DL_PAD_NANDF_D2__GPIO2_IO02 0x80000000 + MX6DL_PAD_NANDF_D3__GPIO2_IO03 0x80000000 + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6dl-wandboard.dts b/arch/arm/boot/dts/imx6dl-wandboard.dts new file mode 100644 index 000000000000..bfc59c3566a4 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-wandboard.dts @@ -0,0 +1,44 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * Author: Fabio Estevam <fabio.estevam@freescale.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +/dts-v1/; +#include "imx6dl.dtsi" + +/ { + model = "Wandboard i.MX6 Dual Lite Board"; + compatible = "wand,imx6dl-wandboard", "fsl,imx6dl"; + + memory { + reg = <0x10000000 0x40000000>; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet_1>; + phy-mode = "rgmii"; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_1>; + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3_2>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi index 63fafe2a606c..5bcdf3a90bb3 100644 --- a/arch/arm/boot/dts/imx6dl.dtsi +++ b/arch/arm/boot/dts/imx6dl.dtsi @@ -1,3 +1,4 @@ + /* * Copyright 2013 Freescale Semiconductor, Inc. * @@ -7,7 +8,8 @@ * */ -/include/ "imx6qdl.dtsi" +#include "imx6qdl.dtsi" +#include "imx6dl-pinfunc.h" / { cpus { @@ -29,6 +31,127 @@ soc { aips1: aips-bus@02000000 { + iomuxc: iomuxc@020e0000 { + compatible = "fsl,imx6dl-iomuxc"; + reg = <0x020e0000 0x4000>; + + enet { + pinctrl_enet_1: enetgrp-1 { + fsl,pins = < + MX6DL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6DL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6DL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 + MX6DL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 + MX6DL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 + MX6DL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 + MX6DL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 + MX6DL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6DL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6DL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6DL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6DL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6DL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6DL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6DL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + MX6DL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + >; + }; + + pinctrl_enet_2: enetgrp-2 { + fsl,pins = < + MX6DL_PAD_KEY_COL1__ENET_MDIO 0x1b0b0 + MX6DL_PAD_KEY_COL2__ENET_MDC 0x1b0b0 + MX6DL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 + MX6DL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 + MX6DL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 + MX6DL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 + MX6DL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 + MX6DL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6DL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6DL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6DL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6DL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6DL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6DL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6DL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + >; + }; + }; + + uart1 { + pinctrl_uart1_1: uart1grp-1 { + fsl,pins = < + MX6DL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6DL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + >; + }; + }; + + uart4 { + pinctrl_uart4_1: uart4grp-1 { + fsl,pins = < + MX6DL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6DL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; + }; + }; + + usbotg { + pinctrl_usbotg_2: usbotggrp-2 { + fsl,pins = < + MX6DL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 + >; + }; + }; + + usdhc2 { + pinctrl_usdhc2_1: usdhc2grp-1 { + fsl,pins = < + MX6DL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6DL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6DL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6DL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6DL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6DL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + MX6DL_PAD_NANDF_D4__SD2_DATA4 0x17059 + MX6DL_PAD_NANDF_D5__SD2_DATA5 0x17059 + MX6DL_PAD_NANDF_D6__SD2_DATA6 0x17059 + MX6DL_PAD_NANDF_D7__SD2_DATA7 0x17059 + >; + }; + }; + + usdhc3 { + pinctrl_usdhc3_1: usdhc3grp-1 { + fsl,pins = < + MX6DL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6DL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6DL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6DL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6DL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6DL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6DL_PAD_SD3_DAT4__SD3_DATA4 0x17059 + MX6DL_PAD_SD3_DAT5__SD3_DATA5 0x17059 + MX6DL_PAD_SD3_DAT6__SD3_DATA6 0x17059 + MX6DL_PAD_SD3_DAT7__SD3_DATA7 0x17059 + >; + }; + + pinctrl_usdhc3_2: usdhc3grp_2 { + fsl,pins = < + MX6DL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6DL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6DL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6DL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6DL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6DL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + >; + }; + }; + + + }; + pxp: pxp@020f0000 { reg = <0x020f0000 0x4000>; interrupts = <0 98 0x04>; diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts index 53eb241fa5ad..4e54fde591bd 100644 --- a/arch/arm/boot/dts/imx6q-arm2.dts +++ b/arch/arm/boot/dts/imx6q-arm2.dts @@ -11,7 +11,7 @@ */ /dts-v1/; -/include/ "imx6q.dtsi" +#include "imx6q.dtsi" / { model = "Freescale i.MX6 Quad Armadillo2 Board"; @@ -57,7 +57,7 @@ hog { pinctrl_hog: hoggrp { fsl,pins = < - 176 0x80000000 /* MX6Q_PAD_EIM_D25__GPIO_3_25 */ + MX6Q_PAD_EIM_D25__GPIO3_IO25 0x80000000 >; }; }; @@ -65,8 +65,8 @@ arm2 { pinctrl_usdhc3_arm2: usdhc3grp-arm2 { fsl,pins = < - 1363 0x80000000 /* MX6Q_PAD_NANDF_CS0__GPIO_6_11 */ - 1369 0x80000000 /* MX6Q_PAD_NANDF_CS1__GPIO_6_14 */ + MX6Q_PAD_NANDF_CS0__GPIO6_IO11 0x80000000 + MX6Q_PAD_NANDF_CS1__GPIO6_IO14 0x80000000 >; }; }; diff --git a/arch/arm/boot/dts/imx6q-pinfunc.h b/arch/arm/boot/dts/imx6q-pinfunc.h new file mode 100644 index 000000000000..faea6e1ada00 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-pinfunc.h @@ -0,0 +1,1041 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __DTS_IMX6Q_PINFUNC_H +#define __DTS_IMX6Q_PINFUNC_H + +/* + * The pin function ID is a tuple of + * <mux_reg conf_reg input_reg mux_mode input_val> + */ +#define MX6Q_PAD_SD2_DAT1__SD2_DATA1 0x04c 0x360 0x000 0x0 0x0 +#define MX6Q_PAD_SD2_DAT1__ECSPI5_SS0 0x04c 0x360 0x834 0x1 0x0 +#define MX6Q_PAD_SD2_DAT1__EIM_CS2_B 0x04c 0x360 0x000 0x2 0x0 +#define MX6Q_PAD_SD2_DAT1__AUD4_TXFS 0x04c 0x360 0x7c8 0x3 0x0 +#define MX6Q_PAD_SD2_DAT1__KEY_COL7 0x04c 0x360 0x8f0 0x4 0x0 +#define MX6Q_PAD_SD2_DAT1__GPIO1_IO14 0x04c 0x360 0x000 0x5 0x0 +#define MX6Q_PAD_SD2_DAT2__SD2_DATA2 0x050 0x364 0x000 0x0 0x0 +#define MX6Q_PAD_SD2_DAT2__ECSPI5_SS1 0x050 0x364 0x838 0x1 0x0 +#define MX6Q_PAD_SD2_DAT2__EIM_CS3_B 0x050 0x364 0x000 0x2 0x0 +#define MX6Q_PAD_SD2_DAT2__AUD4_TXD 0x050 0x364 0x7b8 0x3 0x0 +#define MX6Q_PAD_SD2_DAT2__KEY_ROW6 0x050 0x364 0x8f8 0x4 0x0 +#define MX6Q_PAD_SD2_DAT2__GPIO1_IO13 0x050 0x364 0x000 0x5 0x0 +#define MX6Q_PAD_SD2_DAT0__SD2_DATA0 0x054 0x368 0x000 0x0 0x0 +#define MX6Q_PAD_SD2_DAT0__ECSPI5_MISO 0x054 0x368 0x82c 0x1 0x0 +#define MX6Q_PAD_SD2_DAT0__AUD4_RXD 0x054 0x368 0x7b4 0x3 0x0 +#define MX6Q_PAD_SD2_DAT0__KEY_ROW7 0x054 0x368 0x8fc 0x4 0x0 +#define MX6Q_PAD_SD2_DAT0__GPIO1_IO15 0x054 0x368 0x000 0x5 0x0 +#define MX6Q_PAD_SD2_DAT0__DCIC2_OUT 0x054 0x368 0x000 0x6 0x0 +#define MX6Q_PAD_RGMII_TXC__USB_H2_DATA 0x058 0x36c 0x000 0x0 0x0 +#define MX6Q_PAD_RGMII_TXC__RGMII_TXC 0x058 0x36c 0x000 0x1 0x0 +#define MX6Q_PAD_RGMII_TXC__SPDIF_EXT_CLK 0x058 0x36c 0x918 0x2 0x0 +#define MX6Q_PAD_RGMII_TXC__GPIO6_IO19 0x058 0x36c 0x000 0x5 0x0 +#define MX6Q_PAD_RGMII_TXC__XTALOSC_REF_CLK_24M 0x058 0x36c 0x000 0x7 0x0 +#define MX6Q_PAD_RGMII_TD0__HSI_TX_READY 0x05c 0x370 0x000 0x0 0x0 +#define MX6Q_PAD_RGMII_TD0__RGMII_TD0 0x05c 0x370 0x000 0x1 0x0 +#define MX6Q_PAD_RGMII_TD0__GPIO6_IO20 0x05c 0x370 0x000 0x5 0x0 +#define MX6Q_PAD_RGMII_TD1__HSI_RX_FLAG 0x060 0x374 0x000 0x0 0x0 +#define MX6Q_PAD_RGMII_TD1__RGMII_TD1 0x060 0x374 0x000 0x1 0x0 +#define MX6Q_PAD_RGMII_TD1__GPIO6_IO21 0x060 0x374 0x000 0x5 0x0 +#define MX6Q_PAD_RGMII_TD2__HSI_RX_DATA 0x064 0x378 0x000 0x0 0x0 +#define MX6Q_PAD_RGMII_TD2__RGMII_TD2 0x064 0x378 0x000 0x1 0x0 +#define MX6Q_PAD_RGMII_TD2__GPIO6_IO22 0x064 0x378 0x000 0x5 0x0 +#define MX6Q_PAD_RGMII_TD3__HSI_RX_WAKE 0x068 0x37c 0x000 0x0 0x0 +#define MX6Q_PAD_RGMII_TD3__RGMII_TD3 0x068 0x37c 0x000 0x1 0x0 +#define MX6Q_PAD_RGMII_TD3__GPIO6_IO23 0x068 0x37c 0x000 0x5 0x0 +#define MX6Q_PAD_RGMII_RX_CTL__USB_H3_DATA 0x06c 0x380 0x000 0x0 0x0 +#define MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x06c 0x380 0x858 0x1 0x0 +#define MX6Q_PAD_RGMII_RX_CTL__GPIO6_IO24 0x06c 0x380 0x000 0x5 0x0 +#define MX6Q_PAD_RGMII_RD0__HSI_RX_READY 0x070 0x384 0x000 0x0 0x0 +#define MX6Q_PAD_RGMII_RD0__RGMII_RD0 0x070 0x384 0x848 0x1 0x0 +#define MX6Q_PAD_RGMII_RD0__GPIO6_IO25 0x070 0x384 0x000 0x5 0x0 +#define MX6Q_PAD_RGMII_TX_CTL__USB_H2_STROBE 0x074 0x388 0x000 0x0 0x0 +#define MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x074 0x388 0x000 0x1 0x0 +#define MX6Q_PAD_RGMII_TX_CTL__GPIO6_IO26 0x074 0x388 0x000 0x5 0x0 +#define MX6Q_PAD_RGMII_TX_CTL__ENET_REF_CLK 0x074 0x388 0x83c 0x7 0x0 +#define MX6Q_PAD_RGMII_RD1__HSI_TX_FLAG 0x078 0x38c 0x000 0x0 0x0 +#define MX6Q_PAD_RGMII_RD1__RGMII_RD1 0x078 0x38c 0x84c 0x1 0x0 +#define MX6Q_PAD_RGMII_RD1__GPIO6_IO27 0x078 0x38c 0x000 0x5 0x0 +#define MX6Q_PAD_RGMII_RD2__HSI_TX_DATA 0x07c 0x390 0x000 0x0 0x0 +#define MX6Q_PAD_RGMII_RD2__RGMII_RD2 0x07c 0x390 0x850 0x1 0x0 +#define MX6Q_PAD_RGMII_RD2__GPIO6_IO28 0x07c 0x390 0x000 0x5 0x0 +#define MX6Q_PAD_RGMII_RD3__HSI_TX_WAKE 0x080 0x394 0x000 0x0 0x0 +#define MX6Q_PAD_RGMII_RD3__RGMII_RD3 0x080 0x394 0x854 0x1 0x0 +#define MX6Q_PAD_RGMII_RD3__GPIO6_IO29 0x080 0x394 0x000 0x5 0x0 +#define MX6Q_PAD_RGMII_RXC__USB_H3_STROBE 0x084 0x398 0x000 0x0 0x0 +#define MX6Q_PAD_RGMII_RXC__RGMII_RXC 0x084 0x398 0x844 0x1 0x0 +#define MX6Q_PAD_RGMII_RXC__GPIO6_IO30 0x084 0x398 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_A25__EIM_ADDR25 0x088 0x39c 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_A25__ECSPI4_SS1 0x088 0x39c 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_A25__ECSPI2_RDY 0x088 0x39c 0x000 0x2 0x0 +#define MX6Q_PAD_EIM_A25__IPU1_DI1_PIN12 0x088 0x39c 0x000 0x3 0x0 +#define MX6Q_PAD_EIM_A25__IPU1_DI0_D1_CS 0x088 0x39c 0x000 0x4 0x0 +#define MX6Q_PAD_EIM_A25__GPIO5_IO02 0x088 0x39c 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_A25__HDMI_TX_CEC_LINE 0x088 0x39c 0x88c 0x6 0x0 +#define MX6Q_PAD_EIM_EB2__EIM_EB2_B 0x08c 0x3a0 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_EB2__ECSPI1_SS0 0x08c 0x3a0 0x800 0x1 0x0 +#define MX6Q_PAD_EIM_EB2__IPU2_CSI1_DATA19 0x08c 0x3a0 0x8d4 0x3 0x0 +#define MX6Q_PAD_EIM_EB2__HDMI_TX_DDC_SCL 0x08c 0x3a0 0x890 0x4 0x0 +#define MX6Q_PAD_EIM_EB2__GPIO2_IO30 0x08c 0x3a0 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_EB2__I2C2_SCL 0x08c 0x3a0 0x8a0 0x6 0x0 +#define MX6Q_PAD_EIM_EB2__SRC_BOOT_CFG30 0x08c 0x3a0 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_D16__EIM_DATA16 0x090 0x3a4 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_D16__ECSPI1_SCLK 0x090 0x3a4 0x7f4 0x1 0x0 +#define MX6Q_PAD_EIM_D16__IPU1_DI0_PIN05 0x090 0x3a4 0x000 0x2 0x0 +#define MX6Q_PAD_EIM_D16__IPU2_CSI1_DATA18 0x090 0x3a4 0x8d0 0x3 0x0 +#define MX6Q_PAD_EIM_D16__HDMI_TX_DDC_SDA 0x090 0x3a4 0x894 0x4 0x0 +#define MX6Q_PAD_EIM_D16__GPIO3_IO16 0x090 0x3a4 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_D16__I2C2_SDA 0x090 0x3a4 0x8a4 0x6 0x0 +#define MX6Q_PAD_EIM_D17__EIM_DATA17 0x094 0x3a8 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_D17__ECSPI1_MISO 0x094 0x3a8 0x7f8 0x1 0x0 +#define MX6Q_PAD_EIM_D17__IPU1_DI0_PIN06 0x094 0x3a8 0x000 0x2 0x0 +#define MX6Q_PAD_EIM_D17__IPU2_CSI1_PIXCLK 0x094 0x3a8 0x8e0 0x3 0x0 +#define MX6Q_PAD_EIM_D17__DCIC1_OUT 0x094 0x3a8 0x000 0x4 0x0 +#define MX6Q_PAD_EIM_D17__GPIO3_IO17 0x094 0x3a8 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_D17__I2C3_SCL 0x094 0x3a8 0x8a8 0x6 0x0 +#define MX6Q_PAD_EIM_D18__EIM_DATA18 0x098 0x3ac 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_D18__ECSPI1_MOSI 0x098 0x3ac 0x7fc 0x1 0x0 +#define MX6Q_PAD_EIM_D18__IPU1_DI0_PIN07 0x098 0x3ac 0x000 0x2 0x0 +#define MX6Q_PAD_EIM_D18__IPU2_CSI1_DATA17 0x098 0x3ac 0x8cc 0x3 0x0 +#define MX6Q_PAD_EIM_D18__IPU1_DI1_D0_CS 0x098 0x3ac 0x000 0x4 0x0 +#define MX6Q_PAD_EIM_D18__GPIO3_IO18 0x098 0x3ac 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_D18__I2C3_SDA 0x098 0x3ac 0x8ac 0x6 0x0 +#define MX6Q_PAD_EIM_D19__EIM_DATA19 0x09c 0x3b0 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_D19__ECSPI1_SS1 0x09c 0x3b0 0x804 0x1 0x0 +#define MX6Q_PAD_EIM_D19__IPU1_DI0_PIN08 0x09c 0x3b0 0x000 0x2 0x0 +#define MX6Q_PAD_EIM_D19__IPU2_CSI1_DATA16 0x09c 0x3b0 0x8c8 0x3 0x0 +#define MX6Q_PAD_EIM_D19__UART1_CTS_B 0x09c 0x3b0 0x000 0x4 0x0 +#define MX6Q_PAD_EIM_D19__UART1_RTS_B 0x09c 0x3b0 0x91c 0x4 0x0 +#define MX6Q_PAD_EIM_D19__GPIO3_IO19 0x09c 0x3b0 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_D19__EPIT1_OUT 0x09c 0x3b0 0x000 0x6 0x0 +#define MX6Q_PAD_EIM_D20__EIM_DATA20 0x0a0 0x3b4 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_D20__ECSPI4_SS0 0x0a0 0x3b4 0x824 0x1 0x0 +#define MX6Q_PAD_EIM_D20__IPU1_DI0_PIN16 0x0a0 0x3b4 0x000 0x2 0x0 +#define MX6Q_PAD_EIM_D20__IPU2_CSI1_DATA15 0x0a0 0x3b4 0x8c4 0x3 0x0 +#define MX6Q_PAD_EIM_D20__UART1_RTS_B 0x0a0 0x3b4 0x91c 0x4 0x1 +#define MX6Q_PAD_EIM_D20__UART1_CTS_B 0x0a0 0x3b4 0x000 0x4 0x0 +#define MX6Q_PAD_EIM_D20__GPIO3_IO20 0x0a0 0x3b4 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_D20__EPIT2_OUT 0x0a0 0x3b4 0x000 0x6 0x0 +#define MX6Q_PAD_EIM_D21__EIM_DATA21 0x0a4 0x3b8 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_D21__ECSPI4_SCLK 0x0a4 0x3b8 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_D21__IPU1_DI0_PIN17 0x0a4 0x3b8 0x000 0x2 0x0 +#define MX6Q_PAD_EIM_D21__IPU2_CSI1_DATA11 0x0a4 0x3b8 0x8b4 0x3 0x0 +#define MX6Q_PAD_EIM_D21__USB_OTG_OC 0x0a4 0x3b8 0x944 0x4 0x0 +#define MX6Q_PAD_EIM_D21__GPIO3_IO21 0x0a4 0x3b8 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_D21__I2C1_SCL 0x0a4 0x3b8 0x898 0x6 0x0 +#define MX6Q_PAD_EIM_D21__SPDIF_IN 0x0a4 0x3b8 0x914 0x7 0x0 +#define MX6Q_PAD_EIM_D22__EIM_DATA22 0x0a8 0x3bc 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_D22__ECSPI4_MISO 0x0a8 0x3bc 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_D22__IPU1_DI0_PIN01 0x0a8 0x3bc 0x000 0x2 0x0 +#define MX6Q_PAD_EIM_D22__IPU2_CSI1_DATA10 0x0a8 0x3bc 0x8b0 0x3 0x0 +#define MX6Q_PAD_EIM_D22__USB_OTG_PWR 0x0a8 0x3bc 0x000 0x4 0x0 +#define MX6Q_PAD_EIM_D22__GPIO3_IO22 0x0a8 0x3bc 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_D22__SPDIF_OUT 0x0a8 0x3bc 0x000 0x6 0x0 +#define MX6Q_PAD_EIM_D23__EIM_DATA23 0x0ac 0x3c0 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_D23__IPU1_DI0_D0_CS 0x0ac 0x3c0 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_D23__UART3_CTS_B 0x0ac 0x3c0 0x000 0x2 0x0 +#define MX6Q_PAD_EIM_D23__UART3_RTS_B 0x0ac 0x3c0 0x92c 0x2 0x0 +#define MX6Q_PAD_EIM_D23__UART1_DCD_B 0x0ac 0x3c0 0x000 0x3 0x0 +#define MX6Q_PAD_EIM_D23__IPU2_CSI1_DATA_EN 0x0ac 0x3c0 0x8d8 0x4 0x0 +#define MX6Q_PAD_EIM_D23__GPIO3_IO23 0x0ac 0x3c0 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_D23__IPU1_DI1_PIN02 0x0ac 0x3c0 0x000 0x6 0x0 +#define MX6Q_PAD_EIM_D23__IPU1_DI1_PIN14 0x0ac 0x3c0 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_EB3__EIM_EB3_B 0x0b0 0x3c4 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_EB3__ECSPI4_RDY 0x0b0 0x3c4 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_EB3__UART3_RTS_B 0x0b0 0x3c4 0x92c 0x2 0x1 +#define MX6Q_PAD_EIM_EB3__UART3_CTS_B 0x0b0 0x3c4 0x000 0x2 0x0 +#define MX6Q_PAD_EIM_EB3__UART1_RI_B 0x0b0 0x3c4 0x000 0x3 0x0 +#define MX6Q_PAD_EIM_EB3__IPU2_CSI1_HSYNC 0x0b0 0x3c4 0x8dc 0x4 0x0 +#define MX6Q_PAD_EIM_EB3__GPIO2_IO31 0x0b0 0x3c4 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_EB3__IPU1_DI1_PIN03 0x0b0 0x3c4 0x000 0x6 0x0 +#define MX6Q_PAD_EIM_EB3__SRC_BOOT_CFG31 0x0b0 0x3c4 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_D24__EIM_DATA24 0x0b4 0x3c8 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_D24__ECSPI4_SS2 0x0b4 0x3c8 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_D24__UART3_TX_DATA 0x0b4 0x3c8 0x000 0x2 0x0 +#define MX6Q_PAD_EIM_D24__UART3_RX_DATA 0x0b4 0x3c8 0x930 0x2 0x0 +#define MX6Q_PAD_EIM_D24__ECSPI1_SS2 0x0b4 0x3c8 0x808 0x3 0x0 +#define MX6Q_PAD_EIM_D24__ECSPI2_SS2 0x0b4 0x3c8 0x000 0x4 0x0 +#define MX6Q_PAD_EIM_D24__GPIO3_IO24 0x0b4 0x3c8 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_D24__AUD5_RXFS 0x0b4 0x3c8 0x7d8 0x6 0x0 +#define MX6Q_PAD_EIM_D24__UART1_DTR_B 0x0b4 0x3c8 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_D25__EIM_DATA25 0x0b8 0x3cc 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_D25__ECSPI4_SS3 0x0b8 0x3cc 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_D25__UART3_RX_DATA 0x0b8 0x3cc 0x930 0x2 0x1 +#define MX6Q_PAD_EIM_D25__UART3_TX_DATA 0x0b8 0x3cc 0x000 0x2 0x0 +#define MX6Q_PAD_EIM_D25__ECSPI1_SS3 0x0b8 0x3cc 0x80c 0x3 0x0 +#define MX6Q_PAD_EIM_D25__ECSPI2_SS3 0x0b8 0x3cc 0x000 0x4 0x0 +#define MX6Q_PAD_EIM_D25__GPIO3_IO25 0x0b8 0x3cc 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_D25__AUD5_RXC 0x0b8 0x3cc 0x7d4 0x6 0x0 +#define MX6Q_PAD_EIM_D25__UART1_DSR_B 0x0b8 0x3cc 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_D26__EIM_DATA26 0x0bc 0x3d0 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_D26__IPU1_DI1_PIN11 0x0bc 0x3d0 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_D26__IPU1_CSI0_DATA01 0x0bc 0x3d0 0x000 0x2 0x0 +#define MX6Q_PAD_EIM_D26__IPU2_CSI1_DATA14 0x0bc 0x3d0 0x8c0 0x3 0x0 +#define MX6Q_PAD_EIM_D26__UART2_TX_DATA 0x0bc 0x3d0 0x000 0x4 0x0 +#define MX6Q_PAD_EIM_D26__UART2_RX_DATA 0x0bc 0x3d0 0x928 0x4 0x0 +#define MX6Q_PAD_EIM_D26__GPIO3_IO26 0x0bc 0x3d0 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_D26__IPU1_SISG2 0x0bc 0x3d0 0x000 0x6 0x0 +#define MX6Q_PAD_EIM_D26__IPU1_DISP1_DATA22 0x0bc 0x3d0 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_D27__EIM_DATA27 0x0c0 0x3d4 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_D27__IPU1_DI1_PIN13 0x0c0 0x3d4 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_D27__IPU1_CSI0_DATA00 0x0c0 0x3d4 0x000 0x2 0x0 +#define MX6Q_PAD_EIM_D27__IPU2_CSI1_DATA13 0x0c0 0x3d4 0x8bc 0x3 0x0 +#define MX6Q_PAD_EIM_D27__UART2_RX_DATA 0x0c0 0x3d4 0x928 0x4 0x1 +#define MX6Q_PAD_EIM_D27__UART2_TX_DATA 0x0c0 0x3d4 0x000 0x4 0x0 +#define MX6Q_PAD_EIM_D27__GPIO3_IO27 0x0c0 0x3d4 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_D27__IPU1_SISG3 0x0c0 0x3d4 0x000 0x6 0x0 +#define MX6Q_PAD_EIM_D27__IPU1_DISP1_DATA23 0x0c0 0x3d4 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_D28__EIM_DATA28 0x0c4 0x3d8 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_D28__I2C1_SDA 0x0c4 0x3d8 0x89c 0x1 0x0 +#define MX6Q_PAD_EIM_D28__ECSPI4_MOSI 0x0c4 0x3d8 0x000 0x2 0x0 +#define MX6Q_PAD_EIM_D28__IPU2_CSI1_DATA12 0x0c4 0x3d8 0x8b8 0x3 0x0 +#define MX6Q_PAD_EIM_D28__UART2_CTS_B 0x0c4 0x3d8 0x000 0x4 0x0 +#define MX6Q_PAD_EIM_D28__UART2_RTS_B 0x0c4 0x3d8 0x924 0x4 0x0 +#define MX6Q_PAD_EIM_D28__GPIO3_IO28 0x0c4 0x3d8 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_D28__IPU1_EXT_TRIG 0x0c4 0x3d8 0x000 0x6 0x0 +#define MX6Q_PAD_EIM_D28__IPU1_DI0_PIN13 0x0c4 0x3d8 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_D29__EIM_DATA29 0x0c8 0x3dc 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_D29__IPU1_DI1_PIN15 0x0c8 0x3dc 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_D29__ECSPI4_SS0 0x0c8 0x3dc 0x824 0x2 0x1 +#define MX6Q_PAD_EIM_D29__UART2_RTS_B 0x0c8 0x3dc 0x924 0x4 0x1 +#define MX6Q_PAD_EIM_D29__UART2_CTS_B 0x0c8 0x3dc 0x000 0x4 0x0 +#define MX6Q_PAD_EIM_D29__GPIO3_IO29 0x0c8 0x3dc 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_D29__IPU2_CSI1_VSYNC 0x0c8 0x3dc 0x8e4 0x6 0x0 +#define MX6Q_PAD_EIM_D29__IPU1_DI0_PIN14 0x0c8 0x3dc 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_D30__EIM_DATA30 0x0cc 0x3e0 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_D30__IPU1_DISP1_DATA21 0x0cc 0x3e0 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_D30__IPU1_DI0_PIN11 0x0cc 0x3e0 0x000 0x2 0x0 +#define MX6Q_PAD_EIM_D30__IPU1_CSI0_DATA03 0x0cc 0x3e0 0x000 0x3 0x0 +#define MX6Q_PAD_EIM_D30__UART3_CTS_B 0x0cc 0x3e0 0x000 0x4 0x0 +#define MX6Q_PAD_EIM_D30__UART3_RTS_B 0x0cc 0x3e0 0x92c 0x4 0x2 +#define MX6Q_PAD_EIM_D30__GPIO3_IO30 0x0cc 0x3e0 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_D30__USB_H1_OC 0x0cc 0x3e0 0x948 0x6 0x0 +#define MX6Q_PAD_EIM_D31__EIM_DATA31 0x0d0 0x3e4 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_D31__IPU1_DISP1_DATA20 0x0d0 0x3e4 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_D31__IPU1_DI0_PIN12 0x0d0 0x3e4 0x000 0x2 0x0 +#define MX6Q_PAD_EIM_D31__IPU1_CSI0_DATA02 0x0d0 0x3e4 0x000 0x3 0x0 +#define MX6Q_PAD_EIM_D31__UART3_RTS_B 0x0d0 0x3e4 0x92c 0x4 0x3 +#define MX6Q_PAD_EIM_D31__UART3_CTS_B 0x0d0 0x3e4 0x000 0x4 0x0 +#define MX6Q_PAD_EIM_D31__GPIO3_IO31 0x0d0 0x3e4 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_D31__USB_H1_PWR 0x0d0 0x3e4 0x000 0x6 0x0 +#define MX6Q_PAD_EIM_A24__EIM_ADDR24 0x0d4 0x3e8 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_A24__IPU1_DISP1_DATA19 0x0d4 0x3e8 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_A24__IPU2_CSI1_DATA19 0x0d4 0x3e8 0x8d4 0x2 0x1 +#define MX6Q_PAD_EIM_A24__IPU2_SISG2 0x0d4 0x3e8 0x000 0x3 0x0 +#define MX6Q_PAD_EIM_A24__IPU1_SISG2 0x0d4 0x3e8 0x000 0x4 0x0 +#define MX6Q_PAD_EIM_A24__GPIO5_IO04 0x0d4 0x3e8 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_A24__SRC_BOOT_CFG24 0x0d4 0x3e8 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_A23__EIM_ADDR23 0x0d8 0x3ec 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_A23__IPU1_DISP1_DATA18 0x0d8 0x3ec 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_A23__IPU2_CSI1_DATA18 0x0d8 0x3ec 0x8d0 0x2 0x1 +#define MX6Q_PAD_EIM_A23__IPU2_SISG3 0x0d8 0x3ec 0x000 0x3 0x0 +#define MX6Q_PAD_EIM_A23__IPU1_SISG3 0x0d8 0x3ec 0x000 0x4 0x0 +#define MX6Q_PAD_EIM_A23__GPIO6_IO06 0x0d8 0x3ec 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_A23__SRC_BOOT_CFG23 0x0d8 0x3ec 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_A22__EIM_ADDR22 0x0dc 0x3f0 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_A22__IPU1_DISP1_DATA17 0x0dc 0x3f0 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_A22__IPU2_CSI1_DATA17 0x0dc 0x3f0 0x8cc 0x2 0x1 +#define MX6Q_PAD_EIM_A22__GPIO2_IO16 0x0dc 0x3f0 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_A22__SRC_BOOT_CFG22 0x0dc 0x3f0 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_A21__EIM_ADDR21 0x0e0 0x3f4 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_A21__IPU1_DISP1_DATA16 0x0e0 0x3f4 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_A21__IPU2_CSI1_DATA16 0x0e0 0x3f4 0x8c8 0x2 0x1 +#define MX6Q_PAD_EIM_A21__GPIO2_IO17 0x0e0 0x3f4 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_A21__SRC_BOOT_CFG21 0x0e0 0x3f4 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_A20__EIM_ADDR20 0x0e4 0x3f8 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_A20__IPU1_DISP1_DATA15 0x0e4 0x3f8 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_A20__IPU2_CSI1_DATA15 0x0e4 0x3f8 0x8c4 0x2 0x1 +#define MX6Q_PAD_EIM_A20__GPIO2_IO18 0x0e4 0x3f8 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_A20__SRC_BOOT_CFG20 0x0e4 0x3f8 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_A19__EIM_ADDR19 0x0e8 0x3fc 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_A19__IPU1_DISP1_DATA14 0x0e8 0x3fc 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_A19__IPU2_CSI1_DATA14 0x0e8 0x3fc 0x8c0 0x2 0x1 +#define MX6Q_PAD_EIM_A19__GPIO2_IO19 0x0e8 0x3fc 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_A19__SRC_BOOT_CFG19 0x0e8 0x3fc 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_A18__EIM_ADDR18 0x0ec 0x400 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_A18__IPU1_DISP1_DATA13 0x0ec 0x400 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_A18__IPU2_CSI1_DATA13 0x0ec 0x400 0x8bc 0x2 0x1 +#define MX6Q_PAD_EIM_A18__GPIO2_IO20 0x0ec 0x400 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_A18__SRC_BOOT_CFG18 0x0ec 0x400 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_A17__EIM_ADDR17 0x0f0 0x404 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_A17__IPU1_DISP1_DATA12 0x0f0 0x404 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_A17__IPU2_CSI1_DATA12 0x0f0 0x404 0x8b8 0x2 0x1 +#define MX6Q_PAD_EIM_A17__GPIO2_IO21 0x0f0 0x404 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_A17__SRC_BOOT_CFG17 0x0f0 0x404 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_A16__EIM_ADDR16 0x0f4 0x408 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_A16__IPU1_DI1_DISP_CLK 0x0f4 0x408 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_A16__IPU2_CSI1_PIXCLK 0x0f4 0x408 0x8e0 0x2 0x1 +#define MX6Q_PAD_EIM_A16__GPIO2_IO22 0x0f4 0x408 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_A16__SRC_BOOT_CFG16 0x0f4 0x408 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_CS0__EIM_CS0_B 0x0f8 0x40c 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_CS0__IPU1_DI1_PIN05 0x0f8 0x40c 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_CS0__ECSPI2_SCLK 0x0f8 0x40c 0x810 0x2 0x0 +#define MX6Q_PAD_EIM_CS0__GPIO2_IO23 0x0f8 0x40c 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_CS1__EIM_CS1_B 0x0fc 0x410 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_CS1__IPU1_DI1_PIN06 0x0fc 0x410 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_CS1__ECSPI2_MOSI 0x0fc 0x410 0x818 0x2 0x0 +#define MX6Q_PAD_EIM_CS1__GPIO2_IO24 0x0fc 0x410 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_OE__EIM_OE_B 0x100 0x414 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_OE__IPU1_DI1_PIN07 0x100 0x414 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_OE__ECSPI2_MISO 0x100 0x414 0x814 0x2 0x0 +#define MX6Q_PAD_EIM_OE__GPIO2_IO25 0x100 0x414 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_RW__EIM_RW 0x104 0x418 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_RW__IPU1_DI1_PIN08 0x104 0x418 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_RW__ECSPI2_SS0 0x104 0x418 0x81c 0x2 0x0 +#define MX6Q_PAD_EIM_RW__GPIO2_IO26 0x104 0x418 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_RW__SRC_BOOT_CFG29 0x104 0x418 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_LBA__EIM_LBA_B 0x108 0x41c 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_LBA__IPU1_DI1_PIN17 0x108 0x41c 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_LBA__ECSPI2_SS1 0x108 0x41c 0x820 0x2 0x0 +#define MX6Q_PAD_EIM_LBA__GPIO2_IO27 0x108 0x41c 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_LBA__SRC_BOOT_CFG26 0x108 0x41c 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_EB0__EIM_EB0_B 0x10c 0x420 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_EB0__IPU1_DISP1_DATA11 0x10c 0x420 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_EB0__IPU2_CSI1_DATA11 0x10c 0x420 0x8b4 0x2 0x1 +#define MX6Q_PAD_EIM_EB0__CCM_PMIC_READY 0x10c 0x420 0x7f0 0x4 0x0 +#define MX6Q_PAD_EIM_EB0__GPIO2_IO28 0x10c 0x420 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_EB0__SRC_BOOT_CFG27 0x10c 0x420 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_EB1__EIM_EB1_B 0x110 0x424 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_EB1__IPU1_DISP1_DATA10 0x110 0x424 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_EB1__IPU2_CSI1_DATA10 0x110 0x424 0x8b0 0x2 0x1 +#define MX6Q_PAD_EIM_EB1__GPIO2_IO29 0x110 0x424 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_EB1__SRC_BOOT_CFG28 0x110 0x424 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_DA0__EIM_AD00 0x114 0x428 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_DA0__IPU1_DISP1_DATA09 0x114 0x428 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_DA0__IPU2_CSI1_DATA09 0x114 0x428 0x000 0x2 0x0 +#define MX6Q_PAD_EIM_DA0__GPIO3_IO00 0x114 0x428 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_DA0__SRC_BOOT_CFG00 0x114 0x428 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_DA1__EIM_AD01 0x118 0x42c 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_DA1__IPU1_DISP1_DATA08 0x118 0x42c 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_DA1__IPU2_CSI1_DATA08 0x118 0x42c 0x000 0x2 0x0 +#define MX6Q_PAD_EIM_DA1__GPIO3_IO01 0x118 0x42c 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_DA1__SRC_BOOT_CFG01 0x118 0x42c 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_DA2__EIM_AD02 0x11c 0x430 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_DA2__IPU1_DISP1_DATA07 0x11c 0x430 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_DA2__IPU2_CSI1_DATA07 0x11c 0x430 0x000 0x2 0x0 +#define MX6Q_PAD_EIM_DA2__GPIO3_IO02 0x11c 0x430 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_DA2__SRC_BOOT_CFG02 0x11c 0x430 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_DA3__EIM_AD03 0x120 0x434 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_DA3__IPU1_DISP1_DATA06 0x120 0x434 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_DA3__IPU2_CSI1_DATA06 0x120 0x434 0x000 0x2 0x0 +#define MX6Q_PAD_EIM_DA3__GPIO3_IO03 0x120 0x434 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_DA3__SRC_BOOT_CFG03 0x120 0x434 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_DA4__EIM_AD04 0x124 0x438 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_DA4__IPU1_DISP1_DATA05 0x124 0x438 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_DA4__IPU2_CSI1_DATA05 0x124 0x438 0x000 0x2 0x0 +#define MX6Q_PAD_EIM_DA4__GPIO3_IO04 0x124 0x438 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_DA4__SRC_BOOT_CFG04 0x124 0x438 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_DA5__EIM_AD05 0x128 0x43c 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_DA5__IPU1_DISP1_DATA04 0x128 0x43c 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_DA5__IPU2_CSI1_DATA04 0x128 0x43c 0x000 0x2 0x0 +#define MX6Q_PAD_EIM_DA5__GPIO3_IO05 0x128 0x43c 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_DA5__SRC_BOOT_CFG05 0x128 0x43c 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_DA6__EIM_AD06 0x12c 0x440 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_DA6__IPU1_DISP1_DATA03 0x12c 0x440 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_DA6__IPU2_CSI1_DATA03 0x12c 0x440 0x000 0x2 0x0 +#define MX6Q_PAD_EIM_DA6__GPIO3_IO06 0x12c 0x440 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_DA6__SRC_BOOT_CFG06 0x12c 0x440 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_DA7__EIM_AD07 0x130 0x444 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_DA7__IPU1_DISP1_DATA02 0x130 0x444 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_DA7__IPU2_CSI1_DATA02 0x130 0x444 0x000 0x2 0x0 +#define MX6Q_PAD_EIM_DA7__GPIO3_IO07 0x130 0x444 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_DA7__SRC_BOOT_CFG07 0x130 0x444 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_DA8__EIM_AD08 0x134 0x448 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_DA8__IPU1_DISP1_DATA01 0x134 0x448 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_DA8__IPU2_CSI1_DATA01 0x134 0x448 0x000 0x2 0x0 +#define MX6Q_PAD_EIM_DA8__GPIO3_IO08 0x134 0x448 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_DA8__SRC_BOOT_CFG08 0x134 0x448 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_DA9__EIM_AD09 0x138 0x44c 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_DA9__IPU1_DISP1_DATA00 0x138 0x44c 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_DA9__IPU2_CSI1_DATA00 0x138 0x44c 0x000 0x2 0x0 +#define MX6Q_PAD_EIM_DA9__GPIO3_IO09 0x138 0x44c 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_DA9__SRC_BOOT_CFG09 0x138 0x44c 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_DA10__EIM_AD10 0x13c 0x450 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_DA10__IPU1_DI1_PIN15 0x13c 0x450 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_DA10__IPU2_CSI1_DATA_EN 0x13c 0x450 0x8d8 0x2 0x1 +#define MX6Q_PAD_EIM_DA10__GPIO3_IO10 0x13c 0x450 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_DA10__SRC_BOOT_CFG10 0x13c 0x450 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_DA11__EIM_AD11 0x140 0x454 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_DA11__IPU1_DI1_PIN02 0x140 0x454 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_DA11__IPU2_CSI1_HSYNC 0x140 0x454 0x8dc 0x2 0x1 +#define MX6Q_PAD_EIM_DA11__GPIO3_IO11 0x140 0x454 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_DA11__SRC_BOOT_CFG11 0x140 0x454 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_DA12__EIM_AD12 0x144 0x458 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_DA12__IPU1_DI1_PIN03 0x144 0x458 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_DA12__IPU2_CSI1_VSYNC 0x144 0x458 0x8e4 0x2 0x1 +#define MX6Q_PAD_EIM_DA12__GPIO3_IO12 0x144 0x458 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_DA12__SRC_BOOT_CFG12 0x144 0x458 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_DA13__EIM_AD13 0x148 0x45c 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_DA13__IPU1_DI1_D0_CS 0x148 0x45c 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_DA13__GPIO3_IO13 0x148 0x45c 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_DA13__SRC_BOOT_CFG13 0x148 0x45c 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_DA14__EIM_AD14 0x14c 0x460 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_DA14__IPU1_DI1_D1_CS 0x14c 0x460 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_DA14__GPIO3_IO14 0x14c 0x460 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_DA14__SRC_BOOT_CFG14 0x14c 0x460 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_DA15__EIM_AD15 0x150 0x464 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_DA15__IPU1_DI1_PIN01 0x150 0x464 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_DA15__IPU1_DI1_PIN04 0x150 0x464 0x000 0x2 0x0 +#define MX6Q_PAD_EIM_DA15__GPIO3_IO15 0x150 0x464 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_DA15__SRC_BOOT_CFG15 0x150 0x464 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_WAIT__EIM_WAIT_B 0x154 0x468 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_WAIT__EIM_DTACK_B 0x154 0x468 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_WAIT__GPIO5_IO00 0x154 0x468 0x000 0x5 0x0 +#define MX6Q_PAD_EIM_WAIT__SRC_BOOT_CFG25 0x154 0x468 0x000 0x7 0x0 +#define MX6Q_PAD_EIM_BCLK__EIM_BCLK 0x158 0x46c 0x000 0x0 0x0 +#define MX6Q_PAD_EIM_BCLK__IPU1_DI1_PIN16 0x158 0x46c 0x000 0x1 0x0 +#define MX6Q_PAD_EIM_BCLK__GPIO6_IO31 0x158 0x46c 0x000 0x5 0x0 +#define MX6Q_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x15c 0x470 0x000 0x0 0x0 +#define MX6Q_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK 0x15c 0x470 0x000 0x1 0x0 +#define MX6Q_PAD_DI0_DISP_CLK__GPIO4_IO16 0x15c 0x470 0x000 0x5 0x0 +#define MX6Q_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x160 0x474 0x000 0x0 0x0 +#define MX6Q_PAD_DI0_PIN15__IPU2_DI0_PIN15 0x160 0x474 0x000 0x1 0x0 +#define MX6Q_PAD_DI0_PIN15__AUD6_TXC 0x160 0x474 0x000 0x2 0x0 +#define MX6Q_PAD_DI0_PIN15__GPIO4_IO17 0x160 0x474 0x000 0x5 0x0 +#define MX6Q_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x164 0x478 0x000 0x0 0x0 +#define MX6Q_PAD_DI0_PIN2__IPU2_DI0_PIN02 0x164 0x478 0x000 0x1 0x0 +#define MX6Q_PAD_DI0_PIN2__AUD6_TXD 0x164 0x478 0x000 0x2 0x0 +#define MX6Q_PAD_DI0_PIN2__GPIO4_IO18 0x164 0x478 0x000 0x5 0x0 +#define MX6Q_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x168 0x47c 0x000 0x0 0x0 +#define MX6Q_PAD_DI0_PIN3__IPU2_DI0_PIN03 0x168 0x47c 0x000 0x1 0x0 +#define MX6Q_PAD_DI0_PIN3__AUD6_TXFS 0x168 0x47c 0x000 0x2 0x0 +#define MX6Q_PAD_DI0_PIN3__GPIO4_IO19 0x168 0x47c 0x000 0x5 0x0 +#define MX6Q_PAD_DI0_PIN4__IPU1_DI0_PIN04 0x16c 0x480 0x000 0x0 0x0 +#define MX6Q_PAD_DI0_PIN4__IPU2_DI0_PIN04 0x16c 0x480 0x000 0x1 0x0 +#define MX6Q_PAD_DI0_PIN4__AUD6_RXD 0x16c 0x480 0x000 0x2 0x0 +#define MX6Q_PAD_DI0_PIN4__SD1_WP 0x16c 0x480 0x94c 0x3 0x0 +#define MX6Q_PAD_DI0_PIN4__GPIO4_IO20 0x16c 0x480 0x000 0x5 0x0 +#define MX6Q_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x170 0x484 0x000 0x0 0x0 +#define MX6Q_PAD_DISP0_DAT0__IPU2_DISP0_DATA00 0x170 0x484 0x000 0x1 0x0 +#define MX6Q_PAD_DISP0_DAT0__ECSPI3_SCLK 0x170 0x484 0x000 0x2 0x0 +#define MX6Q_PAD_DISP0_DAT0__GPIO4_IO21 0x170 0x484 0x000 0x5 0x0 +#define MX6Q_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x174 0x488 0x000 0x0 0x0 +#define MX6Q_PAD_DISP0_DAT1__IPU2_DISP0_DATA01 0x174 0x488 0x000 0x1 0x0 +#define MX6Q_PAD_DISP0_DAT1__ECSPI3_MOSI 0x174 0x488 0x000 0x2 0x0 +#define MX6Q_PAD_DISP0_DAT1__GPIO4_IO22 0x174 0x488 0x000 0x5 0x0 +#define MX6Q_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x178 0x48c 0x000 0x0 0x0 +#define MX6Q_PAD_DISP0_DAT2__IPU2_DISP0_DATA02 0x178 0x48c 0x000 0x1 0x0 +#define MX6Q_PAD_DISP0_DAT2__ECSPI3_MISO 0x178 0x48c 0x000 0x2 0x0 +#define MX6Q_PAD_DISP0_DAT2__GPIO4_IO23 0x178 0x48c 0x000 0x5 0x0 +#define MX6Q_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x17c 0x490 0x000 0x0 0x0 +#define MX6Q_PAD_DISP0_DAT3__IPU2_DISP0_DATA03 0x17c 0x490 0x000 0x1 0x0 +#define MX6Q_PAD_DISP0_DAT3__ECSPI3_SS0 0x17c 0x490 0x000 0x2 0x0 +#define MX6Q_PAD_DISP0_DAT3__GPIO4_IO24 0x17c 0x490 0x000 0x5 0x0 +#define MX6Q_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x180 0x494 0x000 0x0 0x0 +#define MX6Q_PAD_DISP0_DAT4__IPU2_DISP0_DATA04 0x180 0x494 0x000 0x1 0x0 +#define MX6Q_PAD_DISP0_DAT4__ECSPI3_SS1 0x180 0x494 0x000 0x2 0x0 +#define MX6Q_PAD_DISP0_DAT4__GPIO4_IO25 0x180 0x494 0x000 0x5 0x0 +#define MX6Q_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x184 0x498 0x000 0x0 0x0 +#define MX6Q_PAD_DISP0_DAT5__IPU2_DISP0_DATA05 0x184 0x498 0x000 0x1 0x0 +#define MX6Q_PAD_DISP0_DAT5__ECSPI3_SS2 0x184 0x498 0x000 0x2 0x0 +#define MX6Q_PAD_DISP0_DAT5__AUD6_RXFS 0x184 0x498 0x000 0x3 0x0 +#define MX6Q_PAD_DISP0_DAT5__GPIO4_IO26 0x184 0x498 0x000 0x5 0x0 +#define MX6Q_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x188 0x49c 0x000 0x0 0x0 +#define MX6Q_PAD_DISP0_DAT6__IPU2_DISP0_DATA06 0x188 0x49c 0x000 0x1 0x0 +#define MX6Q_PAD_DISP0_DAT6__ECSPI3_SS3 0x188 0x49c 0x000 0x2 0x0 +#define MX6Q_PAD_DISP0_DAT6__AUD6_RXC 0x188 0x49c 0x000 0x3 0x0 +#define MX6Q_PAD_DISP0_DAT6__GPIO4_IO27 0x188 0x49c 0x000 0x5 0x0 +#define MX6Q_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x18c 0x4a0 0x000 0x0 0x0 +#define MX6Q_PAD_DISP0_DAT7__IPU2_DISP0_DATA07 0x18c 0x4a0 0x000 0x1 0x0 +#define MX6Q_PAD_DISP0_DAT7__ECSPI3_RDY 0x18c 0x4a0 0x000 0x2 0x0 +#define MX6Q_PAD_DISP0_DAT7__GPIO4_IO28 0x18c 0x4a0 0x000 0x5 0x0 +#define MX6Q_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x190 0x4a4 0x000 0x0 0x0 +#define MX6Q_PAD_DISP0_DAT8__IPU2_DISP0_DATA08 0x190 0x4a4 0x000 0x1 0x0 +#define MX6Q_PAD_DISP0_DAT8__PWM1_OUT 0x190 0x4a4 0x000 0x2 0x0 +#define MX6Q_PAD_DISP0_DAT8__WDOG1_B 0x190 0x4a4 0x000 0x3 0x0 +#define MX6Q_PAD_DISP0_DAT8__GPIO4_IO29 0x190 0x4a4 0x000 0x5 0x0 +#define MX6Q_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x194 0x4a8 0x000 0x0 0x0 +#define MX6Q_PAD_DISP0_DAT9__IPU2_DISP0_DATA09 0x194 0x4a8 0x000 0x1 0x0 +#define MX6Q_PAD_DISP0_DAT9__PWM2_OUT 0x194 0x4a8 0x000 0x2 0x0 +#define MX6Q_PAD_DISP0_DAT9__WDOG2_B 0x194 0x4a8 0x000 0x3 0x0 +#define MX6Q_PAD_DISP0_DAT9__GPIO4_IO30 0x194 0x4a8 0x000 0x5 0x0 +#define MX6Q_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x198 0x4ac 0x000 0x0 0x0 +#define MX6Q_PAD_DISP0_DAT10__IPU2_DISP0_DATA10 0x198 0x4ac 0x000 0x1 0x0 +#define MX6Q_PAD_DISP0_DAT10__GPIO4_IO31 0x198 0x4ac 0x000 0x5 0x0 +#define MX6Q_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x19c 0x4b0 0x000 0x0 0x0 +#define MX6Q_PAD_DISP0_DAT11__IPU2_DISP0_DATA11 0x19c 0x4b0 0x000 0x1 0x0 +#define MX6Q_PAD_DISP0_DAT11__GPIO5_IO05 0x19c 0x4b0 0x000 0x5 0x0 +#define MX6Q_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x1a0 0x4b4 0x000 0x0 0x0 +#define MX6Q_PAD_DISP0_DAT12__IPU2_DISP0_DATA12 0x1a0 0x4b4 0x000 0x1 0x0 +#define MX6Q_PAD_DISP0_DAT12__GPIO5_IO06 0x1a0 0x4b4 0x000 0x5 0x0 +#define MX6Q_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x1a4 0x4b8 0x000 0x0 0x0 +#define MX6Q_PAD_DISP0_DAT13__IPU2_DISP0_DATA13 0x1a4 0x4b8 0x000 0x1 0x0 +#define MX6Q_PAD_DISP0_DAT13__AUD5_RXFS 0x1a4 0x4b8 0x7d8 0x3 0x1 +#define MX6Q_PAD_DISP0_DAT13__GPIO5_IO07 0x1a4 0x4b8 0x000 0x5 0x0 +#define MX6Q_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x1a8 0x4bc 0x000 0x0 0x0 +#define MX6Q_PAD_DISP0_DAT14__IPU2_DISP0_DATA14 0x1a8 0x4bc 0x000 0x1 0x0 +#define MX6Q_PAD_DISP0_DAT14__AUD5_RXC 0x1a8 0x4bc 0x7d4 0x3 0x1 +#define MX6Q_PAD_DISP0_DAT14__GPIO5_IO08 0x1a8 0x4bc 0x000 0x5 0x0 +#define MX6Q_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x1ac 0x4c0 0x000 0x0 0x0 +#define MX6Q_PAD_DISP0_DAT15__IPU2_DISP0_DATA15 0x1ac 0x4c0 0x000 0x1 0x0 +#define MX6Q_PAD_DISP0_DAT15__ECSPI1_SS1 0x1ac 0x4c0 0x804 0x2 0x1 +#define MX6Q_PAD_DISP0_DAT15__ECSPI2_SS1 0x1ac 0x4c0 0x820 0x3 0x1 +#define MX6Q_PAD_DISP0_DAT15__GPIO5_IO09 0x1ac 0x4c0 0x000 0x5 0x0 +#define MX6Q_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x1b0 0x4c4 0x000 0x0 0x0 +#define MX6Q_PAD_DISP0_DAT16__IPU2_DISP0_DATA16 0x1b0 0x4c4 0x000 0x1 0x0 +#define MX6Q_PAD_DISP0_DAT16__ECSPI2_MOSI 0x1b0 0x4c4 0x818 0x2 0x1 +#define MX6Q_PAD_DISP0_DAT16__AUD5_TXC 0x1b0 0x4c4 0x7dc 0x3 0x0 +#define MX6Q_PAD_DISP0_DAT16__SDMA_EXT_EVENT0 0x1b0 0x4c4 0x90c 0x4 0x0 +#define MX6Q_PAD_DISP0_DAT16__GPIO5_IO10 0x1b0 0x4c4 0x000 0x5 0x0 +#define MX6Q_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x1b4 0x4c8 0x000 0x0 0x0 +#define MX6Q_PAD_DISP0_DAT17__IPU2_DISP0_DATA17 0x1b4 0x4c8 0x000 0x1 0x0 +#define MX6Q_PAD_DISP0_DAT17__ECSPI2_MISO 0x1b4 0x4c8 0x814 0x2 0x1 +#define MX6Q_PAD_DISP0_DAT17__AUD5_TXD 0x1b4 0x4c8 0x7d0 0x3 0x0 +#define MX6Q_PAD_DISP0_DAT17__SDMA_EXT_EVENT1 0x1b4 0x4c8 0x910 0x4 0x0 +#define MX6Q_PAD_DISP0_DAT17__GPIO5_IO11 0x1b4 0x4c8 0x000 0x5 0x0 +#define MX6Q_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x1b8 0x4cc 0x000 0x0 0x0 +#define MX6Q_PAD_DISP0_DAT18__IPU2_DISP0_DATA18 0x1b8 0x4cc 0x000 0x1 0x0 +#define MX6Q_PAD_DISP0_DAT18__ECSPI2_SS0 0x1b8 0x4cc 0x81c 0x2 0x1 +#define MX6Q_PAD_DISP0_DAT18__AUD5_TXFS 0x1b8 0x4cc 0x7e0 0x3 0x0 +#define MX6Q_PAD_DISP0_DAT18__AUD4_RXFS 0x1b8 0x4cc 0x7c0 0x4 0x0 +#define MX6Q_PAD_DISP0_DAT18__GPIO5_IO12 0x1b8 0x4cc 0x000 0x5 0x0 +#define MX6Q_PAD_DISP0_DAT18__EIM_CS2_B 0x1b8 0x4cc 0x000 0x7 0x0 +#define MX6Q_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x1bc 0x4d0 0x000 0x0 0x0 +#define MX6Q_PAD_DISP0_DAT19__IPU2_DISP0_DATA19 0x1bc 0x4d0 0x000 0x1 0x0 +#define MX6Q_PAD_DISP0_DAT19__ECSPI2_SCLK 0x1bc 0x4d0 0x810 0x2 0x1 +#define MX6Q_PAD_DISP0_DAT19__AUD5_RXD 0x1bc 0x4d0 0x7cc 0x3 0x0 +#define MX6Q_PAD_DISP0_DAT19__AUD4_RXC 0x1bc 0x4d0 0x7bc 0x4 0x0 +#define MX6Q_PAD_DISP0_DAT19__GPIO5_IO13 0x1bc 0x4d0 0x000 0x5 0x0 +#define MX6Q_PAD_DISP0_DAT19__EIM_CS3_B 0x1bc 0x4d0 0x000 0x7 0x0 +#define MX6Q_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x1c0 0x4d4 0x000 0x0 0x0 +#define MX6Q_PAD_DISP0_DAT20__IPU2_DISP0_DATA20 0x1c0 0x4d4 0x000 0x1 0x0 +#define MX6Q_PAD_DISP0_DAT20__ECSPI1_SCLK 0x1c0 0x4d4 0x7f4 0x2 0x1 +#define MX6Q_PAD_DISP0_DAT20__AUD4_TXC 0x1c0 0x4d4 0x7c4 0x3 0x0 +#define MX6Q_PAD_DISP0_DAT20__GPIO5_IO14 0x1c0 0x4d4 0x000 0x5 0x0 +#define MX6Q_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x1c4 0x4d8 0x000 0x0 0x0 +#define MX6Q_PAD_DISP0_DAT21__IPU2_DISP0_DATA21 0x1c4 0x4d8 0x000 0x1 0x0 +#define MX6Q_PAD_DISP0_DAT21__ECSPI1_MOSI 0x1c4 0x4d8 0x7fc 0x2 0x1 +#define MX6Q_PAD_DISP0_DAT21__AUD4_TXD 0x1c4 0x4d8 0x7b8 0x3 0x1 +#define MX6Q_PAD_DISP0_DAT21__GPIO5_IO15 0x1c4 0x4d8 0x000 0x5 0x0 +#define MX6Q_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x1c8 0x4dc 0x000 0x0 0x0 +#define MX6Q_PAD_DISP0_DAT22__IPU2_DISP0_DATA22 0x1c8 0x4dc 0x000 0x1 0x0 +#define MX6Q_PAD_DISP0_DAT22__ECSPI1_MISO 0x1c8 0x4dc 0x7f8 0x2 0x1 +#define MX6Q_PAD_DISP0_DAT22__AUD4_TXFS 0x1c8 0x4dc 0x7c8 0x3 0x1 +#define MX6Q_PAD_DISP0_DAT22__GPIO5_IO16 0x1c8 0x4dc 0x000 0x5 0x0 +#define MX6Q_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x1cc 0x4e0 0x000 0x0 0x0 +#define MX6Q_PAD_DISP0_DAT23__IPU2_DISP0_DATA23 0x1cc 0x4e0 0x000 0x1 0x0 +#define MX6Q_PAD_DISP0_DAT23__ECSPI1_SS0 0x1cc 0x4e0 0x800 0x2 0x1 +#define MX6Q_PAD_DISP0_DAT23__AUD4_RXD 0x1cc 0x4e0 0x7b4 0x3 0x1 +#define MX6Q_PAD_DISP0_DAT23__GPIO5_IO17 0x1cc 0x4e0 0x000 0x5 0x0 +#define MX6Q_PAD_ENET_MDIO__ENET_MDIO 0x1d0 0x4e4 0x840 0x1 0x0 +#define MX6Q_PAD_ENET_MDIO__ESAI_RX_CLK 0x1d0 0x4e4 0x86c 0x2 0x0 +#define MX6Q_PAD_ENET_MDIO__ENET_1588_EVENT1_OUT 0x1d0 0x4e4 0x000 0x4 0x0 +#define MX6Q_PAD_ENET_MDIO__GPIO1_IO22 0x1d0 0x4e4 0x000 0x5 0x0 +#define MX6Q_PAD_ENET_MDIO__SPDIF_LOCK 0x1d0 0x4e4 0x000 0x6 0x0 +#define MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1d4 0x4e8 0x000 0x1 0x0 +#define MX6Q_PAD_ENET_REF_CLK__ESAI_RX_FS 0x1d4 0x4e8 0x85c 0x2 0x0 +#define MX6Q_PAD_ENET_REF_CLK__GPIO1_IO23 0x1d4 0x4e8 0x000 0x5 0x0 +#define MX6Q_PAD_ENET_REF_CLK__SPDIF_SR_CLK 0x1d4 0x4e8 0x000 0x6 0x0 +#define MX6Q_PAD_ENET_RX_ER__USB_OTG_ID 0x1d8 0x4ec 0x000 0x0 0x0 +#define MX6Q_PAD_ENET_RX_ER__ENET_RX_ER 0x1d8 0x4ec 0x000 0x1 0x0 +#define MX6Q_PAD_ENET_RX_ER__ESAI_RX_HF_CLK 0x1d8 0x4ec 0x864 0x2 0x0 +#define MX6Q_PAD_ENET_RX_ER__SPDIF_IN 0x1d8 0x4ec 0x914 0x3 0x1 +#define MX6Q_PAD_ENET_RX_ER__ENET_1588_EVENT2_OUT 0x1d8 0x4ec 0x000 0x4 0x0 +#define MX6Q_PAD_ENET_RX_ER__GPIO1_IO24 0x1d8 0x4ec 0x000 0x5 0x0 +#define MX6Q_PAD_ENET_CRS_DV__ENET_RX_EN 0x1dc 0x4f0 0x858 0x1 0x1 +#define MX6Q_PAD_ENET_CRS_DV__ESAI_TX_CLK 0x1dc 0x4f0 0x870 0x2 0x0 +#define MX6Q_PAD_ENET_CRS_DV__SPDIF_EXT_CLK 0x1dc 0x4f0 0x918 0x3 0x1 +#define MX6Q_PAD_ENET_CRS_DV__GPIO1_IO25 0x1dc 0x4f0 0x000 0x5 0x0 +#define MX6Q_PAD_ENET_RXD1__MLB_SIG 0x1e0 0x4f4 0x908 0x0 0x0 +#define MX6Q_PAD_ENET_RXD1__ENET_RX_DATA1 0x1e0 0x4f4 0x84c 0x1 0x1 +#define MX6Q_PAD_ENET_RXD1__ESAI_TX_FS 0x1e0 0x4f4 0x860 0x2 0x0 +#define MX6Q_PAD_ENET_RXD1__ENET_1588_EVENT3_OUT 0x1e0 0x4f4 0x000 0x4 0x0 +#define MX6Q_PAD_ENET_RXD1__GPIO1_IO26 0x1e0 0x4f4 0x000 0x5 0x0 +#define MX6Q_PAD_ENET_RXD0__ENET_RX_DATA0 0x1e4 0x4f8 0x848 0x1 0x1 +#define MX6Q_PAD_ENET_RXD0__ESAI_TX_HF_CLK 0x1e4 0x4f8 0x868 0x2 0x0 +#define MX6Q_PAD_ENET_RXD0__SPDIF_OUT 0x1e4 0x4f8 0x000 0x3 0x0 +#define MX6Q_PAD_ENET_RXD0__GPIO1_IO27 0x1e4 0x4f8 0x000 0x5 0x0 +#define MX6Q_PAD_ENET_TX_EN__ENET_TX_EN 0x1e8 0x4fc 0x000 0x1 0x0 +#define MX6Q_PAD_ENET_TX_EN__ESAI_TX3_RX2 0x1e8 0x4fc 0x880 0x2 0x0 +#define MX6Q_PAD_ENET_TX_EN__GPIO1_IO28 0x1e8 0x4fc 0x000 0x5 0x0 +#define MX6Q_PAD_ENET_TXD1__MLB_CLK 0x1ec 0x500 0x900 0x0 0x0 +#define MX6Q_PAD_ENET_TXD1__ENET_TX_DATA1 0x1ec 0x500 0x000 0x1 0x0 +#define MX6Q_PAD_ENET_TXD1__ESAI_TX2_RX3 0x1ec 0x500 0x87c 0x2 0x0 +#define MX6Q_PAD_ENET_TXD1__ENET_1588_EVENT0_IN 0x1ec 0x500 0x000 0x4 0x0 +#define MX6Q_PAD_ENET_TXD1__GPIO1_IO29 0x1ec 0x500 0x000 0x5 0x0 +#define MX6Q_PAD_ENET_TXD0__ENET_TX_DATA0 0x1f0 0x504 0x000 0x1 0x0 +#define MX6Q_PAD_ENET_TXD0__ESAI_TX4_RX1 0x1f0 0x504 0x884 0x2 0x0 +#define MX6Q_PAD_ENET_TXD0__GPIO1_IO30 0x1f0 0x504 0x000 0x5 0x0 +#define MX6Q_PAD_ENET_MDC__MLB_DATA 0x1f4 0x508 0x904 0x0 0x0 +#define MX6Q_PAD_ENET_MDC__ENET_MDC 0x1f4 0x508 0x000 0x1 0x0 +#define MX6Q_PAD_ENET_MDC__ESAI_TX5_RX0 0x1f4 0x508 0x888 0x2 0x0 +#define MX6Q_PAD_ENET_MDC__ENET_1588_EVENT1_IN 0x1f4 0x508 0x000 0x4 0x0 +#define MX6Q_PAD_ENET_MDC__GPIO1_IO31 0x1f4 0x508 0x000 0x5 0x0 +#define MX6Q_PAD_KEY_COL0__ECSPI1_SCLK 0x1f8 0x5c8 0x7f4 0x0 0x2 +#define MX6Q_PAD_KEY_COL0__ENET_RX_DATA3 0x1f8 0x5c8 0x854 0x1 0x1 +#define MX6Q_PAD_KEY_COL0__AUD5_TXC 0x1f8 0x5c8 0x7dc 0x2 0x1 +#define MX6Q_PAD_KEY_COL0__KEY_COL0 0x1f8 0x5c8 0x000 0x3 0x0 +#define MX6Q_PAD_KEY_COL0__UART4_TX_DATA 0x1f8 0x5c8 0x000 0x4 0x0 +#define MX6Q_PAD_KEY_COL0__UART4_RX_DATA 0x1f8 0x5c8 0x938 0x4 0x0 +#define MX6Q_PAD_KEY_COL0__GPIO4_IO06 0x1f8 0x5c8 0x000 0x5 0x0 +#define MX6Q_PAD_KEY_COL0__DCIC1_OUT 0x1f8 0x5c8 0x000 0x6 0x0 +#define MX6Q_PAD_KEY_ROW0__ECSPI1_MOSI 0x1fc 0x5cc 0x7fc 0x0 0x2 +#define MX6Q_PAD_KEY_ROW0__ENET_TX_DATA3 0x1fc 0x5cc 0x000 0x1 0x0 +#define MX6Q_PAD_KEY_ROW0__AUD5_TXD 0x1fc 0x5cc 0x7d0 0x2 0x1 +#define MX6Q_PAD_KEY_ROW0__KEY_ROW0 0x1fc 0x5cc 0x000 0x3 0x0 +#define MX6Q_PAD_KEY_ROW0__UART4_RX_DATA 0x1fc 0x5cc 0x938 0x4 0x1 +#define MX6Q_PAD_KEY_ROW0__UART4_TX_DATA 0x1fc 0x5cc 0x000 0x4 0x0 +#define MX6Q_PAD_KEY_ROW0__GPIO4_IO07 0x1fc 0x5cc 0x000 0x5 0x0 +#define MX6Q_PAD_KEY_ROW0__DCIC2_OUT 0x1fc 0x5cc 0x000 0x6 0x0 +#define MX6Q_PAD_KEY_COL1__ECSPI1_MISO 0x200 0x5d0 0x7f8 0x0 0x2 +#define MX6Q_PAD_KEY_COL1__ENET_MDIO 0x200 0x5d0 0x840 0x1 0x1 +#define MX6Q_PAD_KEY_COL1__AUD5_TXFS 0x200 0x5d0 0x7e0 0x2 0x1 +#define MX6Q_PAD_KEY_COL1__KEY_COL1 0x200 0x5d0 0x000 0x3 0x0 +#define MX6Q_PAD_KEY_COL1__UART5_TX_DATA 0x200 0x5d0 0x000 0x4 0x0 +#define MX6Q_PAD_KEY_COL1__UART5_RX_DATA 0x200 0x5d0 0x940 0x4 0x0 +#define MX6Q_PAD_KEY_COL1__GPIO4_IO08 0x200 0x5d0 0x000 0x5 0x0 +#define MX6Q_PAD_KEY_COL1__SD1_VSELECT 0x200 0x5d0 0x000 0x6 0x0 +#define MX6Q_PAD_KEY_ROW1__ECSPI1_SS0 0x204 0x5d4 0x800 0x0 0x2 +#define MX6Q_PAD_KEY_ROW1__ENET_COL 0x204 0x5d4 0x000 0x1 0x0 +#define MX6Q_PAD_KEY_ROW1__AUD5_RXD 0x204 0x5d4 0x7cc 0x2 0x1 +#define MX6Q_PAD_KEY_ROW1__KEY_ROW1 0x204 0x5d4 0x000 0x3 0x0 +#define MX6Q_PAD_KEY_ROW1__UART5_RX_DATA 0x204 0x5d4 0x940 0x4 0x1 +#define MX6Q_PAD_KEY_ROW1__UART5_TX_DATA 0x204 0x5d4 0x000 0x4 0x0 +#define MX6Q_PAD_KEY_ROW1__GPIO4_IO09 0x204 0x5d4 0x000 0x5 0x0 +#define MX6Q_PAD_KEY_ROW1__SD2_VSELECT 0x204 0x5d4 0x000 0x6 0x0 +#define MX6Q_PAD_KEY_COL2__ECSPI1_SS1 0x208 0x5d8 0x804 0x0 0x2 +#define MX6Q_PAD_KEY_COL2__ENET_RX_DATA2 0x208 0x5d8 0x850 0x1 0x1 +#define MX6Q_PAD_KEY_COL2__FLEXCAN1_TX 0x208 0x5d8 0x000 0x2 0x0 +#define MX6Q_PAD_KEY_COL2__KEY_COL2 0x208 0x5d8 0x000 0x3 0x0 +#define MX6Q_PAD_KEY_COL2__ENET_MDC 0x208 0x5d8 0x000 0x4 0x0 +#define MX6Q_PAD_KEY_COL2__GPIO4_IO10 0x208 0x5d8 0x000 0x5 0x0 +#define MX6Q_PAD_KEY_COL2__USB_H1_PWR_CTL_WAKE 0x208 0x5d8 0x000 0x6 0x0 +#define MX6Q_PAD_KEY_ROW2__ECSPI1_SS2 0x20c 0x5dc 0x808 0x0 0x1 +#define MX6Q_PAD_KEY_ROW2__ENET_TX_DATA2 0x20c 0x5dc 0x000 0x1 0x0 +#define MX6Q_PAD_KEY_ROW2__FLEXCAN1_RX 0x20c 0x5dc 0x7e4 0x2 0x0 +#define MX6Q_PAD_KEY_ROW2__KEY_ROW2 0x20c 0x5dc 0x000 0x3 0x0 +#define MX6Q_PAD_KEY_ROW2__SD2_VSELECT 0x20c 0x5dc 0x000 0x4 0x0 +#define MX6Q_PAD_KEY_ROW2__GPIO4_IO11 0x20c 0x5dc 0x000 0x5 0x0 +#define MX6Q_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x20c 0x5dc 0x88c 0x6 0x1 +#define MX6Q_PAD_KEY_COL3__ECSPI1_SS3 0x210 0x5e0 0x80c 0x0 0x1 +#define MX6Q_PAD_KEY_COL3__ENET_CRS 0x210 0x5e0 0x000 0x1 0x0 +#define MX6Q_PAD_KEY_COL3__HDMI_TX_DDC_SCL 0x210 0x5e0 0x890 0x2 0x1 +#define MX6Q_PAD_KEY_COL3__KEY_COL3 0x210 0x5e0 0x000 0x3 0x0 +#define MX6Q_PAD_KEY_COL3__I2C2_SCL 0x210 0x5e0 0x8a0 0x4 0x1 +#define MX6Q_PAD_KEY_COL3__GPIO4_IO12 0x210 0x5e0 0x000 0x5 0x0 +#define MX6Q_PAD_KEY_COL3__SPDIF_IN 0x210 0x5e0 0x914 0x6 0x2 +#define MX6Q_PAD_KEY_ROW3__ASRC_EXT_CLK 0x214 0x5e4 0x7b0 0x1 0x0 +#define MX6Q_PAD_KEY_ROW3__HDMI_TX_DDC_SDA 0x214 0x5e4 0x894 0x2 0x1 +#define MX6Q_PAD_KEY_ROW3__KEY_ROW3 0x214 0x5e4 0x000 0x3 0x0 +#define MX6Q_PAD_KEY_ROW3__I2C2_SDA 0x214 0x5e4 0x8a4 0x4 0x1 +#define MX6Q_PAD_KEY_ROW3__GPIO4_IO13 0x214 0x5e4 0x000 0x5 0x0 +#define MX6Q_PAD_KEY_ROW3__SD1_VSELECT 0x214 0x5e4 0x000 0x6 0x0 +#define MX6Q_PAD_KEY_COL4__FLEXCAN2_TX 0x218 0x5e8 0x000 0x0 0x0 +#define MX6Q_PAD_KEY_COL4__IPU1_SISG4 0x218 0x5e8 0x000 0x1 0x0 +#define MX6Q_PAD_KEY_COL4__USB_OTG_OC 0x218 0x5e8 0x944 0x2 0x1 +#define MX6Q_PAD_KEY_COL4__KEY_COL4 0x218 0x5e8 0x000 0x3 0x0 +#define MX6Q_PAD_KEY_COL4__UART5_RTS_B 0x218 0x5e8 0x93c 0x4 0x0 +#define MX6Q_PAD_KEY_COL4__UART5_CTS_B 0x218 0x5e8 0x000 0x4 0x0 +#define MX6Q_PAD_KEY_COL4__GPIO4_IO14 0x218 0x5e8 0x000 0x5 0x0 +#define MX6Q_PAD_KEY_ROW4__FLEXCAN2_RX 0x21c 0x5ec 0x7e8 0x0 0x0 +#define MX6Q_PAD_KEY_ROW4__IPU1_SISG5 0x21c 0x5ec 0x000 0x1 0x0 +#define MX6Q_PAD_KEY_ROW4__USB_OTG_PWR 0x21c 0x5ec 0x000 0x2 0x0 +#define MX6Q_PAD_KEY_ROW4__KEY_ROW4 0x21c 0x5ec 0x000 0x3 0x0 +#define MX6Q_PAD_KEY_ROW4__UART5_CTS_B 0x21c 0x5ec 0x000 0x4 0x0 +#define MX6Q_PAD_KEY_ROW4__UART5_RTS_B 0x21c 0x5ec 0x93c 0x4 0x1 +#define MX6Q_PAD_KEY_ROW4__GPIO4_IO15 0x21c 0x5ec 0x000 0x5 0x0 +#define MX6Q_PAD_GPIO_0__CCM_CLKO1 0x220 0x5f0 0x000 0x0 0x0 +#define MX6Q_PAD_GPIO_0__KEY_COL5 0x220 0x5f0 0x8e8 0x2 0x0 +#define MX6Q_PAD_GPIO_0__ASRC_EXT_CLK 0x220 0x5f0 0x7b0 0x3 0x1 +#define MX6Q_PAD_GPIO_0__EPIT1_OUT 0x220 0x5f0 0x000 0x4 0x0 +#define MX6Q_PAD_GPIO_0__GPIO1_IO00 0x220 0x5f0 0x000 0x5 0x0 +#define MX6Q_PAD_GPIO_0__USB_H1_PWR 0x220 0x5f0 0x000 0x6 0x0 +#define MX6Q_PAD_GPIO_0__SNVS_VIO_5 0x220 0x5f0 0x000 0x7 0x0 +#define MX6Q_PAD_GPIO_1__ESAI_RX_CLK 0x224 0x5f4 0x86c 0x0 0x1 +#define MX6Q_PAD_GPIO_1__WDOG2_B 0x224 0x5f4 0x000 0x1 0x0 +#define MX6Q_PAD_GPIO_1__KEY_ROW5 0x224 0x5f4 0x8f4 0x2 0x0 +#define MX6Q_PAD_GPIO_1__USB_OTG_ID 0x224 0x5f4 0x000 0x3 0x0 +#define MX6Q_PAD_GPIO_1__PWM2_OUT 0x224 0x5f4 0x000 0x4 0x0 +#define MX6Q_PAD_GPIO_1__GPIO1_IO01 0x224 0x5f4 0x000 0x5 0x0 +#define MX6Q_PAD_GPIO_1__SD1_CD_B 0x224 0x5f4 0x000 0x6 0x0 +#define MX6Q_PAD_GPIO_9__ESAI_RX_FS 0x228 0x5f8 0x85c 0x0 0x1 +#define MX6Q_PAD_GPIO_9__WDOG1_B 0x228 0x5f8 0x000 0x1 0x0 +#define MX6Q_PAD_GPIO_9__KEY_COL6 0x228 0x5f8 0x8ec 0x2 0x0 +#define MX6Q_PAD_GPIO_9__CCM_REF_EN_B 0x228 0x5f8 0x000 0x3 0x0 +#define MX6Q_PAD_GPIO_9__PWM1_OUT 0x228 0x5f8 0x000 0x4 0x0 +#define MX6Q_PAD_GPIO_9__GPIO1_IO09 0x228 0x5f8 0x000 0x5 0x0 +#define MX6Q_PAD_GPIO_9__SD1_WP 0x228 0x5f8 0x94c 0x6 0x1 +#define MX6Q_PAD_GPIO_3__ESAI_RX_HF_CLK 0x22c 0x5fc 0x864 0x0 0x1 +#define MX6Q_PAD_GPIO_3__I2C3_SCL 0x22c 0x5fc 0x8a8 0x2 0x1 +#define MX6Q_PAD_GPIO_3__XTALOSC_REF_CLK_24M 0x22c 0x5fc 0x000 0x3 0x0 +#define MX6Q_PAD_GPIO_3__CCM_CLKO2 0x22c 0x5fc 0x000 0x4 0x0 +#define MX6Q_PAD_GPIO_3__GPIO1_IO03 0x22c 0x5fc 0x000 0x5 0x0 +#define MX6Q_PAD_GPIO_3__USB_H1_OC 0x22c 0x5fc 0x948 0x6 0x1 +#define MX6Q_PAD_GPIO_3__MLB_CLK 0x22c 0x5fc 0x900 0x7 0x1 +#define MX6Q_PAD_GPIO_6__ESAI_TX_CLK 0x230 0x600 0x870 0x0 0x1 +#define MX6Q_PAD_GPIO_6__I2C3_SDA 0x230 0x600 0x8ac 0x2 0x1 +#define MX6Q_PAD_GPIO_6__GPIO1_IO06 0x230 0x600 0x000 0x5 0x0 +#define MX6Q_PAD_GPIO_6__SD2_LCTL 0x230 0x600 0x000 0x6 0x0 +#define MX6Q_PAD_GPIO_6__MLB_SIG 0x230 0x600 0x908 0x7 0x1 +#define MX6Q_PAD_GPIO_2__ESAI_TX_FS 0x234 0x604 0x860 0x0 0x1 +#define MX6Q_PAD_GPIO_2__KEY_ROW6 0x234 0x604 0x8f8 0x2 0x1 +#define MX6Q_PAD_GPIO_2__GPIO1_IO02 0x234 0x604 0x000 0x5 0x0 +#define MX6Q_PAD_GPIO_2__SD2_WP 0x234 0x604 0x000 0x6 0x0 +#define MX6Q_PAD_GPIO_2__MLB_DATA 0x234 0x604 0x904 0x7 0x1 +#define MX6Q_PAD_GPIO_4__ESAI_TX_HF_CLK 0x238 0x608 0x868 0x0 0x1 +#define MX6Q_PAD_GPIO_4__KEY_COL7 0x238 0x608 0x8f0 0x2 0x1 +#define MX6Q_PAD_GPIO_4__GPIO1_IO04 0x238 0x608 0x000 0x5 0x0 +#define MX6Q_PAD_GPIO_4__SD2_CD_B 0x238 0x608 0x000 0x6 0x0 +#define MX6Q_PAD_GPIO_5__ESAI_TX2_RX3 0x23c 0x60c 0x87c 0x0 0x1 +#define MX6Q_PAD_GPIO_5__KEY_ROW7 0x23c 0x60c 0x8fc 0x2 0x1 +#define MX6Q_PAD_GPIO_5__CCM_CLKO1 0x23c 0x60c 0x000 0x3 0x0 +#define MX6Q_PAD_GPIO_5__GPIO1_IO05 0x23c 0x60c 0x000 0x5 0x0 +#define MX6Q_PAD_GPIO_5__I2C3_SCL 0x23c 0x60c 0x8a8 0x6 0x2 +#define MX6Q_PAD_GPIO_5__ARM_EVENTI 0x23c 0x60c 0x000 0x7 0x0 +#define MX6Q_PAD_GPIO_7__ESAI_TX4_RX1 0x240 0x610 0x884 0x0 0x1 +#define MX6Q_PAD_GPIO_7__ECSPI5_RDY 0x240 0x610 0x000 0x1 0x0 +#define MX6Q_PAD_GPIO_7__EPIT1_OUT 0x240 0x610 0x000 0x2 0x0 +#define MX6Q_PAD_GPIO_7__FLEXCAN1_TX 0x240 0x610 0x000 0x3 0x0 +#define MX6Q_PAD_GPIO_7__UART2_TX_DATA 0x240 0x610 0x000 0x4 0x0 +#define MX6Q_PAD_GPIO_7__UART2_RX_DATA 0x240 0x610 0x928 0x4 0x2 +#define MX6Q_PAD_GPIO_7__GPIO1_IO07 0x240 0x610 0x000 0x5 0x0 +#define MX6Q_PAD_GPIO_7__SPDIF_LOCK 0x240 0x610 0x000 0x6 0x0 +#define MX6Q_PAD_GPIO_7__USB_OTG_HOST_MODE 0x240 0x610 0x000 0x7 0x0 +#define MX6Q_PAD_GPIO_8__ESAI_TX5_RX0 0x244 0x614 0x888 0x0 0x1 +#define MX6Q_PAD_GPIO_8__XTALOSC_REF_CLK_32K 0x244 0x614 0x000 0x1 0x0 +#define MX6Q_PAD_GPIO_8__EPIT2_OUT 0x244 0x614 0x000 0x2 0x0 +#define MX6Q_PAD_GPIO_8__FLEXCAN1_RX 0x244 0x614 0x7e4 0x3 0x1 +#define MX6Q_PAD_GPIO_8__UART2_RX_DATA 0x244 0x614 0x928 0x4 0x3 +#define MX6Q_PAD_GPIO_8__UART2_TX_DATA 0x244 0x614 0x000 0x4 0x0 +#define MX6Q_PAD_GPIO_8__GPIO1_IO08 0x244 0x614 0x000 0x5 0x0 +#define MX6Q_PAD_GPIO_8__SPDIF_SR_CLK 0x244 0x614 0x000 0x6 0x0 +#define MX6Q_PAD_GPIO_8__USB_OTG_PWR_CTL_WAKE 0x244 0x614 0x000 0x7 0x0 +#define MX6Q_PAD_GPIO_16__ESAI_TX3_RX2 0x248 0x618 0x880 0x0 0x1 +#define MX6Q_PAD_GPIO_16__ENET_1588_EVENT2_IN 0x248 0x618 0x000 0x1 0x0 +#define MX6Q_PAD_GPIO_16__ENET_REF_CLK 0x248 0x618 0x83c 0x2 0x1 +#define MX6Q_PAD_GPIO_16__SD1_LCTL 0x248 0x618 0x000 0x3 0x0 +#define MX6Q_PAD_GPIO_16__SPDIF_IN 0x248 0x618 0x914 0x4 0x3 +#define MX6Q_PAD_GPIO_16__GPIO7_IO11 0x248 0x618 0x000 0x5 0x0 +#define MX6Q_PAD_GPIO_16__I2C3_SDA 0x248 0x618 0x8ac 0x6 0x2 +#define MX6Q_PAD_GPIO_16__JTAG_DE_B 0x248 0x618 0x000 0x7 0x0 +#define MX6Q_PAD_GPIO_17__ESAI_TX0 0x24c 0x61c 0x874 0x0 0x0 +#define MX6Q_PAD_GPIO_17__ENET_1588_EVENT3_IN 0x24c 0x61c 0x000 0x1 0x0 +#define MX6Q_PAD_GPIO_17__CCM_PMIC_READY 0x24c 0x61c 0x7f0 0x2 0x1 +#define MX6Q_PAD_GPIO_17__SDMA_EXT_EVENT0 0x24c 0x61c 0x90c 0x3 0x1 +#define MX6Q_PAD_GPIO_17__SPDIF_OUT 0x24c 0x61c 0x000 0x4 0x0 +#define MX6Q_PAD_GPIO_17__GPIO7_IO12 0x24c 0x61c 0x000 0x5 0x0 +#define MX6Q_PAD_GPIO_18__ESAI_TX1 0x250 0x620 0x878 0x0 0x0 +#define MX6Q_PAD_GPIO_18__ENET_RX_CLK 0x250 0x620 0x844 0x1 0x1 +#define MX6Q_PAD_GPIO_18__SD3_VSELECT 0x250 0x620 0x000 0x2 0x0 +#define MX6Q_PAD_GPIO_18__SDMA_EXT_EVENT1 0x250 0x620 0x910 0x3 0x1 +#define MX6Q_PAD_GPIO_18__ASRC_EXT_CLK 0x250 0x620 0x7b0 0x4 0x2 +#define MX6Q_PAD_GPIO_18__GPIO7_IO13 0x250 0x620 0x000 0x5 0x0 +#define MX6Q_PAD_GPIO_18__SNVS_VIO_5_CTL 0x250 0x620 0x000 0x6 0x0 +#define MX6Q_PAD_GPIO_19__KEY_COL5 0x254 0x624 0x8e8 0x0 0x1 +#define MX6Q_PAD_GPIO_19__ENET_1588_EVENT0_OUT 0x254 0x624 0x000 0x1 0x0 +#define MX6Q_PAD_GPIO_19__SPDIF_OUT 0x254 0x624 0x000 0x2 0x0 +#define MX6Q_PAD_GPIO_19__CCM_CLKO1 0x254 0x624 0x000 0x3 0x0 +#define MX6Q_PAD_GPIO_19__ECSPI1_RDY 0x254 0x624 0x000 0x4 0x0 +#define MX6Q_PAD_GPIO_19__GPIO4_IO05 0x254 0x624 0x000 0x5 0x0 +#define MX6Q_PAD_GPIO_19__ENET_TX_ER 0x254 0x624 0x000 0x6 0x0 +#define MX6Q_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x258 0x628 0x000 0x0 0x0 +#define MX6Q_PAD_CSI0_PIXCLK__GPIO5_IO18 0x258 0x628 0x000 0x5 0x0 +#define MX6Q_PAD_CSI0_PIXCLK__ARM_EVENTO 0x258 0x628 0x000 0x7 0x0 +#define MX6Q_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x25c 0x62c 0x000 0x0 0x0 +#define MX6Q_PAD_CSI0_MCLK__CCM_CLKO1 0x25c 0x62c 0x000 0x3 0x0 +#define MX6Q_PAD_CSI0_MCLK__GPIO5_IO19 0x25c 0x62c 0x000 0x5 0x0 +#define MX6Q_PAD_CSI0_MCLK__ARM_TRACE_CTL 0x25c 0x62c 0x000 0x7 0x0 +#define MX6Q_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN 0x260 0x630 0x000 0x0 0x0 +#define MX6Q_PAD_CSI0_DATA_EN__EIM_DATA00 0x260 0x630 0x000 0x1 0x0 +#define MX6Q_PAD_CSI0_DATA_EN__GPIO5_IO20 0x260 0x630 0x000 0x5 0x0 +#define MX6Q_PAD_CSI0_DATA_EN__ARM_TRACE_CLK 0x260 0x630 0x000 0x7 0x0 +#define MX6Q_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x264 0x634 0x000 0x0 0x0 +#define MX6Q_PAD_CSI0_VSYNC__EIM_DATA01 0x264 0x634 0x000 0x1 0x0 +#define MX6Q_PAD_CSI0_VSYNC__GPIO5_IO21 0x264 0x634 0x000 0x5 0x0 +#define MX6Q_PAD_CSI0_VSYNC__ARM_TRACE00 0x264 0x634 0x000 0x7 0x0 +#define MX6Q_PAD_CSI0_DAT4__IPU1_CSI0_DATA04 0x268 0x638 0x000 0x0 0x0 +#define MX6Q_PAD_CSI0_DAT4__EIM_DATA02 0x268 0x638 0x000 0x1 0x0 +#define MX6Q_PAD_CSI0_DAT4__ECSPI1_SCLK 0x268 0x638 0x7f4 0x2 0x3 +#define MX6Q_PAD_CSI0_DAT4__KEY_COL5 0x268 0x638 0x8e8 0x3 0x2 +#define MX6Q_PAD_CSI0_DAT4__AUD3_TXC 0x268 0x638 0x000 0x4 0x0 +#define MX6Q_PAD_CSI0_DAT4__GPIO5_IO22 0x268 0x638 0x000 0x5 0x0 +#define MX6Q_PAD_CSI0_DAT4__ARM_TRACE01 0x268 0x638 0x000 0x7 0x0 +#define MX6Q_PAD_CSI0_DAT5__IPU1_CSI0_DATA05 0x26c 0x63c 0x000 0x0 0x0 +#define MX6Q_PAD_CSI0_DAT5__EIM_DATA03 0x26c 0x63c 0x000 0x1 0x0 +#define MX6Q_PAD_CSI0_DAT5__ECSPI1_MOSI 0x26c 0x63c 0x7fc 0x2 0x3 +#define MX6Q_PAD_CSI0_DAT5__KEY_ROW5 0x26c 0x63c 0x8f4 0x3 0x1 +#define MX6Q_PAD_CSI0_DAT5__AUD3_TXD 0x26c 0x63c 0x000 0x4 0x0 +#define MX6Q_PAD_CSI0_DAT5__GPIO5_IO23 0x26c 0x63c 0x000 0x5 0x0 +#define MX6Q_PAD_CSI0_DAT5__ARM_TRACE02 0x26c 0x63c 0x000 0x7 0x0 +#define MX6Q_PAD_CSI0_DAT6__IPU1_CSI0_DATA06 0x270 0x640 0x000 0x0 0x0 +#define MX6Q_PAD_CSI0_DAT6__EIM_DATA04 0x270 0x640 0x000 0x1 0x0 +#define MX6Q_PAD_CSI0_DAT6__ECSPI1_MISO 0x270 0x640 0x7f8 0x2 0x3 +#define MX6Q_PAD_CSI0_DAT6__KEY_COL6 0x270 0x640 0x8ec 0x3 0x1 +#define MX6Q_PAD_CSI0_DAT6__AUD3_TXFS 0x270 0x640 0x000 0x4 0x0 +#define MX6Q_PAD_CSI0_DAT6__GPIO5_IO24 0x270 0x640 0x000 0x5 0x0 +#define MX6Q_PAD_CSI0_DAT6__ARM_TRACE03 0x270 0x640 0x000 0x7 0x0 +#define MX6Q_PAD_CSI0_DAT7__IPU1_CSI0_DATA07 0x274 0x644 0x000 0x0 0x0 +#define MX6Q_PAD_CSI0_DAT7__EIM_DATA05 0x274 0x644 0x000 0x1 0x0 +#define MX6Q_PAD_CSI0_DAT7__ECSPI1_SS0 0x274 0x644 0x800 0x2 0x3 +#define MX6Q_PAD_CSI0_DAT7__KEY_ROW6 0x274 0x644 0x8f8 0x3 0x2 +#define MX6Q_PAD_CSI0_DAT7__AUD3_RXD 0x274 0x644 0x000 0x4 0x0 +#define MX6Q_PAD_CSI0_DAT7__GPIO5_IO25 0x274 0x644 0x000 0x5 0x0 +#define MX6Q_PAD_CSI0_DAT7__ARM_TRACE04 0x274 0x644 0x000 0x7 0x0 +#define MX6Q_PAD_CSI0_DAT8__IPU1_CSI0_DATA08 0x278 0x648 0x000 0x0 0x0 +#define MX6Q_PAD_CSI0_DAT8__EIM_DATA06 0x278 0x648 0x000 0x1 0x0 +#define MX6Q_PAD_CSI0_DAT8__ECSPI2_SCLK 0x278 0x648 0x810 0x2 0x2 +#define MX6Q_PAD_CSI0_DAT8__KEY_COL7 0x278 0x648 0x8f0 0x3 0x2 +#define MX6Q_PAD_CSI0_DAT8__I2C1_SDA 0x278 0x648 0x89c 0x4 0x1 +#define MX6Q_PAD_CSI0_DAT8__GPIO5_IO26 0x278 0x648 0x000 0x5 0x0 +#define MX6Q_PAD_CSI0_DAT8__ARM_TRACE05 0x278 0x648 0x000 0x7 0x0 +#define MX6Q_PAD_CSI0_DAT9__IPU1_CSI0_DATA09 0x27c 0x64c 0x000 0x0 0x0 +#define MX6Q_PAD_CSI0_DAT9__EIM_DATA07 0x27c 0x64c 0x000 0x1 0x0 +#define MX6Q_PAD_CSI0_DAT9__ECSPI2_MOSI 0x27c 0x64c 0x818 0x2 0x2 +#define MX6Q_PAD_CSI0_DAT9__KEY_ROW7 0x27c 0x64c 0x8fc 0x3 0x2 +#define MX6Q_PAD_CSI0_DAT9__I2C1_SCL 0x27c 0x64c 0x898 0x4 0x1 +#define MX6Q_PAD_CSI0_DAT9__GPIO5_IO27 0x27c 0x64c 0x000 0x5 0x0 +#define MX6Q_PAD_CSI0_DAT9__ARM_TRACE06 0x27c 0x64c 0x000 0x7 0x0 +#define MX6Q_PAD_CSI0_DAT10__IPU1_CSI0_DATA10 0x280 0x650 0x000 0x0 0x0 +#define MX6Q_PAD_CSI0_DAT10__AUD3_RXC 0x280 0x650 0x000 0x1 0x0 +#define MX6Q_PAD_CSI0_DAT10__ECSPI2_MISO 0x280 0x650 0x814 0x2 0x2 +#define MX6Q_PAD_CSI0_DAT10__UART1_TX_DATA 0x280 0x650 0x000 0x3 0x0 +#define MX6Q_PAD_CSI0_DAT10__UART1_RX_DATA 0x280 0x650 0x920 0x3 0x0 +#define MX6Q_PAD_CSI0_DAT10__GPIO5_IO28 0x280 0x650 0x000 0x5 0x0 +#define MX6Q_PAD_CSI0_DAT10__ARM_TRACE07 0x280 0x650 0x000 0x7 0x0 +#define MX6Q_PAD_CSI0_DAT11__IPU1_CSI0_DATA11 0x284 0x654 0x000 0x0 0x0 +#define MX6Q_PAD_CSI0_DAT11__AUD3_RXFS 0x284 0x654 0x000 0x1 0x0 +#define MX6Q_PAD_CSI0_DAT11__ECSPI2_SS0 0x284 0x654 0x81c 0x2 0x2 +#define MX6Q_PAD_CSI0_DAT11__UART1_RX_DATA 0x284 0x654 0x920 0x3 0x1 +#define MX6Q_PAD_CSI0_DAT11__UART1_TX_DATA 0x284 0x654 0x000 0x3 0x0 +#define MX6Q_PAD_CSI0_DAT11__GPIO5_IO29 0x284 0x654 0x000 0x5 0x0 +#define MX6Q_PAD_CSI0_DAT11__ARM_TRACE08 0x284 0x654 0x000 0x7 0x0 +#define MX6Q_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x288 0x658 0x000 0x0 0x0 +#define MX6Q_PAD_CSI0_DAT12__EIM_DATA08 0x288 0x658 0x000 0x1 0x0 +#define MX6Q_PAD_CSI0_DAT12__UART4_TX_DATA 0x288 0x658 0x000 0x3 0x0 +#define MX6Q_PAD_CSI0_DAT12__UART4_RX_DATA 0x288 0x658 0x938 0x3 0x2 +#define MX6Q_PAD_CSI0_DAT12__GPIO5_IO30 0x288 0x658 0x000 0x5 0x0 +#define MX6Q_PAD_CSI0_DAT12__ARM_TRACE09 0x288 0x658 0x000 0x7 0x0 +#define MX6Q_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x28c 0x65c 0x000 0x0 0x0 +#define MX6Q_PAD_CSI0_DAT13__EIM_DATA09 0x28c 0x65c 0x000 0x1 0x0 +#define MX6Q_PAD_CSI0_DAT13__UART4_RX_DATA 0x28c 0x65c 0x938 0x3 0x3 +#define MX6Q_PAD_CSI0_DAT13__UART4_TX_DATA 0x28c 0x65c 0x000 0x3 0x0 +#define MX6Q_PAD_CSI0_DAT13__GPIO5_IO31 0x28c 0x65c 0x000 0x5 0x0 +#define MX6Q_PAD_CSI0_DAT13__ARM_TRACE10 0x28c 0x65c 0x000 0x7 0x0 +#define MX6Q_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x290 0x660 0x000 0x0 0x0 +#define MX6Q_PAD_CSI0_DAT14__EIM_DATA10 0x290 0x660 0x000 0x1 0x0 +#define MX6Q_PAD_CSI0_DAT14__UART5_TX_DATA 0x290 0x660 0x000 0x3 0x0 +#define MX6Q_PAD_CSI0_DAT14__UART5_RX_DATA 0x290 0x660 0x940 0x3 0x2 +#define MX6Q_PAD_CSI0_DAT14__GPIO6_IO00 0x290 0x660 0x000 0x5 0x0 +#define MX6Q_PAD_CSI0_DAT14__ARM_TRACE11 0x290 0x660 0x000 0x7 0x0 +#define MX6Q_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x294 0x664 0x000 0x0 0x0 +#define MX6Q_PAD_CSI0_DAT15__EIM_DATA11 0x294 0x664 0x000 0x1 0x0 +#define MX6Q_PAD_CSI0_DAT15__UART5_RX_DATA 0x294 0x664 0x940 0x3 0x3 +#define MX6Q_PAD_CSI0_DAT15__UART5_TX_DATA 0x294 0x664 0x000 0x3 0x0 +#define MX6Q_PAD_CSI0_DAT15__GPIO6_IO01 0x294 0x664 0x000 0x5 0x0 +#define MX6Q_PAD_CSI0_DAT15__ARM_TRACE12 0x294 0x664 0x000 0x7 0x0 +#define MX6Q_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x298 0x668 0x000 0x0 0x0 +#define MX6Q_PAD_CSI0_DAT16__EIM_DATA12 0x298 0x668 0x000 0x1 0x0 +#define MX6Q_PAD_CSI0_DAT16__UART4_RTS_B 0x298 0x668 0x934 0x3 0x0 +#define MX6Q_PAD_CSI0_DAT16__UART4_CTS_B 0x298 0x668 0x000 0x3 0x0 +#define MX6Q_PAD_CSI0_DAT16__GPIO6_IO02 0x298 0x668 0x000 0x5 0x0 +#define MX6Q_PAD_CSI0_DAT16__ARM_TRACE13 0x298 0x668 0x000 0x7 0x0 +#define MX6Q_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x29c 0x66c 0x000 0x0 0x0 +#define MX6Q_PAD_CSI0_DAT17__EIM_DATA13 0x29c 0x66c 0x000 0x1 0x0 +#define MX6Q_PAD_CSI0_DAT17__UART4_CTS_B 0x29c 0x66c 0x000 0x3 0x0 +#define MX6Q_PAD_CSI0_DAT17__UART4_RTS_B 0x29c 0x66c 0x934 0x3 0x1 +#define MX6Q_PAD_CSI0_DAT17__GPIO6_IO03 0x29c 0x66c 0x000 0x5 0x0 +#define MX6Q_PAD_CSI0_DAT17__ARM_TRACE14 0x29c 0x66c 0x000 0x7 0x0 +#define MX6Q_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x2a0 0x670 0x000 0x0 0x0 +#define MX6Q_PAD_CSI0_DAT18__EIM_DATA14 0x2a0 0x670 0x000 0x1 0x0 +#define MX6Q_PAD_CSI0_DAT18__UART5_RTS_B 0x2a0 0x670 0x93c 0x3 0x2 +#define MX6Q_PAD_CSI0_DAT18__UART5_CTS_B 0x2a0 0x670 0x000 0x3 0x0 +#define MX6Q_PAD_CSI0_DAT18__GPIO6_IO04 0x2a0 0x670 0x000 0x5 0x0 +#define MX6Q_PAD_CSI0_DAT18__ARM_TRACE15 0x2a0 0x670 0x000 0x7 0x0 +#define MX6Q_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x2a4 0x674 0x000 0x0 0x0 +#define MX6Q_PAD_CSI0_DAT19__EIM_DATA15 0x2a4 0x674 0x000 0x1 0x0 +#define MX6Q_PAD_CSI0_DAT19__UART5_CTS_B 0x2a4 0x674 0x000 0x3 0x0 +#define MX6Q_PAD_CSI0_DAT19__UART5_RTS_B 0x2a4 0x674 0x93c 0x3 0x3 +#define MX6Q_PAD_CSI0_DAT19__GPIO6_IO05 0x2a4 0x674 0x000 0x5 0x0 +#define MX6Q_PAD_SD3_DAT7__SD3_DATA7 0x2a8 0x690 0x000 0x0 0x0 +#define MX6Q_PAD_SD3_DAT7__UART1_TX_DATA 0x2a8 0x690 0x000 0x1 0x0 +#define MX6Q_PAD_SD3_DAT7__UART1_RX_DATA 0x2a8 0x690 0x920 0x1 0x2 +#define MX6Q_PAD_SD3_DAT7__GPIO6_IO17 0x2a8 0x690 0x000 0x5 0x0 +#define MX6Q_PAD_SD3_DAT6__SD3_DATA6 0x2ac 0x694 0x000 0x0 0x0 +#define MX6Q_PAD_SD3_DAT6__UART1_RX_DATA 0x2ac 0x694 0x920 0x1 0x3 +#define MX6Q_PAD_SD3_DAT6__UART1_TX_DATA 0x2ac 0x694 0x000 0x1 0x0 +#define MX6Q_PAD_SD3_DAT6__GPIO6_IO18 0x2ac 0x694 0x000 0x5 0x0 +#define MX6Q_PAD_SD3_DAT5__SD3_DATA5 0x2b0 0x698 0x000 0x0 0x0 +#define MX6Q_PAD_SD3_DAT5__UART2_TX_DATA 0x2b0 0x698 0x000 0x1 0x0 +#define MX6Q_PAD_SD3_DAT5__UART2_RX_DATA 0x2b0 0x698 0x928 0x1 0x4 +#define MX6Q_PAD_SD3_DAT5__GPIO7_IO00 0x2b0 0x698 0x000 0x5 0x0 +#define MX6Q_PAD_SD3_DAT4__SD3_DATA4 0x2b4 0x69c 0x000 0x0 0x0 +#define MX6Q_PAD_SD3_DAT4__UART2_RX_DATA 0x2b4 0x69c 0x928 0x1 0x5 +#define MX6Q_PAD_SD3_DAT4__UART2_TX_DATA 0x2b4 0x69c 0x000 0x1 0x0 +#define MX6Q_PAD_SD3_DAT4__GPIO7_IO01 0x2b4 0x69c 0x000 0x5 0x0 +#define MX6Q_PAD_SD3_CMD__SD3_CMD 0x2b8 0x6a0 0x000 0x0 0x0 +#define MX6Q_PAD_SD3_CMD__UART2_CTS_B 0x2b8 0x6a0 0x000 0x1 0x0 +#define MX6Q_PAD_SD3_CMD__UART2_RTS_B 0x2b8 0x6a0 0x924 0x1 0x2 +#define MX6Q_PAD_SD3_CMD__FLEXCAN1_TX 0x2b8 0x6a0 0x000 0x2 0x0 +#define MX6Q_PAD_SD3_CMD__GPIO7_IO02 0x2b8 0x6a0 0x000 0x5 0x0 +#define MX6Q_PAD_SD3_CLK__SD3_CLK 0x2bc 0x6a4 0x000 0x0 0x0 +#define MX6Q_PAD_SD3_CLK__UART2_RTS_B 0x2bc 0x6a4 0x924 0x1 0x3 +#define MX6Q_PAD_SD3_CLK__UART2_CTS_B 0x2bc 0x6a4 0x000 0x1 0x0 +#define MX6Q_PAD_SD3_CLK__FLEXCAN1_RX 0x2bc 0x6a4 0x7e4 0x2 0x2 +#define MX6Q_PAD_SD3_CLK__GPIO7_IO03 0x2bc 0x6a4 0x000 0x5 0x0 +#define MX6Q_PAD_SD3_DAT0__SD3_DATA0 0x2c0 0x6a8 0x000 0x0 0x0 +#define MX6Q_PAD_SD3_DAT0__UART1_CTS_B 0x2c0 0x6a8 0x000 0x1 0x0 +#define MX6Q_PAD_SD3_DAT0__UART1_RTS_B 0x2c0 0x6a8 0x91c 0x1 0x2 +#define MX6Q_PAD_SD3_DAT0__FLEXCAN2_TX 0x2c0 0x6a8 0x000 0x2 0x0 +#define MX6Q_PAD_SD3_DAT0__GPIO7_IO04 0x2c0 0x6a8 0x000 0x5 0x0 +#define MX6Q_PAD_SD3_DAT1__SD3_DATA1 0x2c4 0x6ac 0x000 0x0 0x0 +#define MX6Q_PAD_SD3_DAT1__UART1_RTS_B 0x2c4 0x6ac 0x91c 0x1 0x3 +#define MX6Q_PAD_SD3_DAT1__UART1_CTS_B 0x2c4 0x6ac 0x000 0x1 0x0 +#define MX6Q_PAD_SD3_DAT1__FLEXCAN2_RX 0x2c4 0x6ac 0x7e8 0x2 0x1 +#define MX6Q_PAD_SD3_DAT1__GPIO7_IO05 0x2c4 0x6ac 0x000 0x5 0x0 +#define MX6Q_PAD_SD3_DAT2__SD3_DATA2 0x2c8 0x6b0 0x000 0x0 0x0 +#define MX6Q_PAD_SD3_DAT2__GPIO7_IO06 0x2c8 0x6b0 0x000 0x5 0x0 +#define MX6Q_PAD_SD3_DAT3__SD3_DATA3 0x2cc 0x6b4 0x000 0x0 0x0 +#define MX6Q_PAD_SD3_DAT3__UART3_CTS_B 0x2cc 0x6b4 0x000 0x1 0x0 +#define MX6Q_PAD_SD3_DAT3__UART3_RTS_B 0x2cc 0x6b4 0x92c 0x1 0x4 +#define MX6Q_PAD_SD3_DAT3__GPIO7_IO07 0x2cc 0x6b4 0x000 0x5 0x0 +#define MX6Q_PAD_SD3_RST__SD3_RESET 0x2d0 0x6b8 0x000 0x0 0x0 +#define MX6Q_PAD_SD3_RST__UART3_RTS_B 0x2d0 0x6b8 0x92c 0x1 0x5 +#define MX6Q_PAD_SD3_RST__UART3_CTS_B 0x2d0 0x6b8 0x000 0x1 0x0 +#define MX6Q_PAD_SD3_RST__GPIO7_IO08 0x2d0 0x6b8 0x000 0x5 0x0 +#define MX6Q_PAD_NANDF_CLE__NAND_CLE 0x2d4 0x6bc 0x000 0x0 0x0 +#define MX6Q_PAD_NANDF_CLE__IPU2_SISG4 0x2d4 0x6bc 0x000 0x1 0x0 +#define MX6Q_PAD_NANDF_CLE__GPIO6_IO07 0x2d4 0x6bc 0x000 0x5 0x0 +#define MX6Q_PAD_NANDF_ALE__NAND_ALE 0x2d8 0x6c0 0x000 0x0 0x0 +#define MX6Q_PAD_NANDF_ALE__SD4_RESET 0x2d8 0x6c0 0x000 0x1 0x0 +#define MX6Q_PAD_NANDF_ALE__GPIO6_IO08 0x2d8 0x6c0 0x000 0x5 0x0 +#define MX6Q_PAD_NANDF_WP_B__NAND_WP_B 0x2dc 0x6c4 0x000 0x0 0x0 +#define MX6Q_PAD_NANDF_WP_B__IPU2_SISG5 0x2dc 0x6c4 0x000 0x1 0x0 +#define MX6Q_PAD_NANDF_WP_B__GPIO6_IO09 0x2dc 0x6c4 0x000 0x5 0x0 +#define MX6Q_PAD_NANDF_RB0__NAND_READY_B 0x2e0 0x6c8 0x000 0x0 0x0 +#define MX6Q_PAD_NANDF_RB0__IPU2_DI0_PIN01 0x2e0 0x6c8 0x000 0x1 0x0 +#define MX6Q_PAD_NANDF_RB0__GPIO6_IO10 0x2e0 0x6c8 0x000 0x5 0x0 +#define MX6Q_PAD_NANDF_CS0__NAND_CE0_B 0x2e4 0x6cc 0x000 0x0 0x0 +#define MX6Q_PAD_NANDF_CS0__GPIO6_IO11 0x2e4 0x6cc 0x000 0x5 0x0 +#define MX6Q_PAD_NANDF_CS1__NAND_CE1_B 0x2e8 0x6d0 0x000 0x0 0x0 +#define MX6Q_PAD_NANDF_CS1__SD4_VSELECT 0x2e8 0x6d0 0x000 0x1 0x0 +#define MX6Q_PAD_NANDF_CS1__SD3_VSELECT 0x2e8 0x6d0 0x000 0x2 0x0 +#define MX6Q_PAD_NANDF_CS1__GPIO6_IO14 0x2e8 0x6d0 0x000 0x5 0x0 +#define MX6Q_PAD_NANDF_CS2__NAND_CE2_B 0x2ec 0x6d4 0x000 0x0 0x0 +#define MX6Q_PAD_NANDF_CS2__IPU1_SISG0 0x2ec 0x6d4 0x000 0x1 0x0 +#define MX6Q_PAD_NANDF_CS2__ESAI_TX0 0x2ec 0x6d4 0x874 0x2 0x1 +#define MX6Q_PAD_NANDF_CS2__EIM_CRE 0x2ec 0x6d4 0x000 0x3 0x0 +#define MX6Q_PAD_NANDF_CS2__CCM_CLKO2 0x2ec 0x6d4 0x000 0x4 0x0 +#define MX6Q_PAD_NANDF_CS2__GPIO6_IO15 0x2ec 0x6d4 0x000 0x5 0x0 +#define MX6Q_PAD_NANDF_CS2__IPU2_SISG0 0x2ec 0x6d4 0x000 0x6 0x0 +#define MX6Q_PAD_NANDF_CS3__NAND_CE3_B 0x2f0 0x6d8 0x000 0x0 0x0 +#define MX6Q_PAD_NANDF_CS3__IPU1_SISG1 0x2f0 0x6d8 0x000 0x1 0x0 +#define MX6Q_PAD_NANDF_CS3__ESAI_TX1 0x2f0 0x6d8 0x878 0x2 0x1 +#define MX6Q_PAD_NANDF_CS3__EIM_ADDR26 0x2f0 0x6d8 0x000 0x3 0x0 +#define MX6Q_PAD_NANDF_CS3__GPIO6_IO16 0x2f0 0x6d8 0x000 0x5 0x0 +#define MX6Q_PAD_NANDF_CS3__IPU2_SISG1 0x2f0 0x6d8 0x000 0x6 0x0 +#define MX6Q_PAD_SD4_CMD__SD4_CMD 0x2f4 0x6dc 0x000 0x0 0x0 +#define MX6Q_PAD_SD4_CMD__NAND_RE_B 0x2f4 0x6dc 0x000 0x1 0x0 +#define MX6Q_PAD_SD4_CMD__UART3_TX_DATA 0x2f4 0x6dc 0x000 0x2 0x0 +#define MX6Q_PAD_SD4_CMD__UART3_RX_DATA 0x2f4 0x6dc 0x930 0x2 0x2 +#define MX6Q_PAD_SD4_CMD__GPIO7_IO09 0x2f4 0x6dc 0x000 0x5 0x0 +#define MX6Q_PAD_SD4_CLK__SD4_CLK 0x2f8 0x6e0 0x000 0x0 0x0 +#define MX6Q_PAD_SD4_CLK__NAND_WE_B 0x2f8 0x6e0 0x000 0x1 0x0 +#define MX6Q_PAD_SD4_CLK__UART3_RX_DATA 0x2f8 0x6e0 0x930 0x2 0x3 +#define MX6Q_PAD_SD4_CLK__UART3_TX_DATA 0x2f8 0x6e0 0x000 0x2 0x0 +#define MX6Q_PAD_SD4_CLK__GPIO7_IO10 0x2f8 0x6e0 0x000 0x5 0x0 +#define MX6Q_PAD_NANDF_D0__NAND_DATA00 0x2fc 0x6e4 0x000 0x0 0x0 +#define MX6Q_PAD_NANDF_D0__SD1_DATA4 0x2fc 0x6e4 0x000 0x1 0x0 +#define MX6Q_PAD_NANDF_D0__GPIO2_IO00 0x2fc 0x6e4 0x000 0x5 0x0 +#define MX6Q_PAD_NANDF_D1__NAND_DATA01 0x300 0x6e8 0x000 0x0 0x0 +#define MX6Q_PAD_NANDF_D1__SD1_DATA5 0x300 0x6e8 0x000 0x1 0x0 +#define MX6Q_PAD_NANDF_D1__GPIO2_IO01 0x300 0x6e8 0x000 0x5 0x0 +#define MX6Q_PAD_NANDF_D2__NAND_DATA02 0x304 0x6ec 0x000 0x0 0x0 +#define MX6Q_PAD_NANDF_D2__SD1_DATA6 0x304 0x6ec 0x000 0x1 0x0 +#define MX6Q_PAD_NANDF_D2__GPIO2_IO02 0x304 0x6ec 0x000 0x5 0x0 +#define MX6Q_PAD_NANDF_D3__NAND_DATA03 0x308 0x6f0 0x000 0x0 0x0 +#define MX6Q_PAD_NANDF_D3__SD1_DATA7 0x308 0x6f0 0x000 0x1 0x0 +#define MX6Q_PAD_NANDF_D3__GPIO2_IO03 0x308 0x6f0 0x000 0x5 0x0 +#define MX6Q_PAD_NANDF_D4__NAND_DATA04 0x30c 0x6f4 0x000 0x0 0x0 +#define MX6Q_PAD_NANDF_D4__SD2_DATA4 0x30c 0x6f4 0x000 0x1 0x0 +#define MX6Q_PAD_NANDF_D4__GPIO2_IO04 0x30c 0x6f4 0x000 0x5 0x0 +#define MX6Q_PAD_NANDF_D5__NAND_DATA05 0x310 0x6f8 0x000 0x0 0x0 +#define MX6Q_PAD_NANDF_D5__SD2_DATA5 0x310 0x6f8 0x000 0x1 0x0 +#define MX6Q_PAD_NANDF_D5__GPIO2_IO05 0x310 0x6f8 0x000 0x5 0x0 +#define MX6Q_PAD_NANDF_D6__NAND_DATA06 0x314 0x6fc 0x000 0x0 0x0 +#define MX6Q_PAD_NANDF_D6__SD2_DATA6 0x314 0x6fc 0x000 0x1 0x0 +#define MX6Q_PAD_NANDF_D6__GPIO2_IO06 0x314 0x6fc 0x000 0x5 0x0 +#define MX6Q_PAD_NANDF_D7__NAND_DATA07 0x318 0x700 0x000 0x0 0x0 +#define MX6Q_PAD_NANDF_D7__SD2_DATA7 0x318 0x700 0x000 0x1 0x0 +#define MX6Q_PAD_NANDF_D7__GPIO2_IO07 0x318 0x700 0x000 0x5 0x0 +#define MX6Q_PAD_SD4_DAT0__SD4_DATA0 0x31c 0x704 0x000 0x1 0x0 +#define MX6Q_PAD_SD4_DAT0__NAND_DQS 0x31c 0x704 0x000 0x2 0x0 +#define MX6Q_PAD_SD4_DAT0__GPIO2_IO08 0x31c 0x704 0x000 0x5 0x0 +#define MX6Q_PAD_SD4_DAT1__SD4_DATA1 0x320 0x708 0x000 0x1 0x0 +#define MX6Q_PAD_SD4_DAT1__PWM3_OUT 0x320 0x708 0x000 0x2 0x0 +#define MX6Q_PAD_SD4_DAT1__GPIO2_IO09 0x320 0x708 0x000 0x5 0x0 +#define MX6Q_PAD_SD4_DAT2__SD4_DATA2 0x324 0x70c 0x000 0x1 0x0 +#define MX6Q_PAD_SD4_DAT2__PWM4_OUT 0x324 0x70c 0x000 0x2 0x0 +#define MX6Q_PAD_SD4_DAT2__GPIO2_IO10 0x324 0x70c 0x000 0x5 0x0 +#define MX6Q_PAD_SD4_DAT3__SD4_DATA3 0x328 0x710 0x000 0x1 0x0 +#define MX6Q_PAD_SD4_DAT3__GPIO2_IO11 0x328 0x710 0x000 0x5 0x0 +#define MX6Q_PAD_SD4_DAT4__SD4_DATA4 0x32c 0x714 0x000 0x1 0x0 +#define MX6Q_PAD_SD4_DAT4__UART2_RX_DATA 0x32c 0x714 0x928 0x2 0x6 +#define MX6Q_PAD_SD4_DAT4__UART2_TX_DATA 0x32c 0x714 0x000 0x2 0x0 +#define MX6Q_PAD_SD4_DAT4__GPIO2_IO12 0x32c 0x714 0x000 0x5 0x0 +#define MX6Q_PAD_SD4_DAT5__SD4_DATA5 0x330 0x718 0x000 0x1 0x0 +#define MX6Q_PAD_SD4_DAT5__UART2_RTS_B 0x330 0x718 0x924 0x2 0x4 +#define MX6Q_PAD_SD4_DAT5__UART2_CTS_B 0x330 0x718 0x000 0x2 0x0 +#define MX6Q_PAD_SD4_DAT5__GPIO2_IO13 0x330 0x718 0x000 0x5 0x0 +#define MX6Q_PAD_SD4_DAT6__SD4_DATA6 0x334 0x71c 0x000 0x1 0x0 +#define MX6Q_PAD_SD4_DAT6__UART2_CTS_B 0x334 0x71c 0x000 0x2 0x0 +#define MX6Q_PAD_SD4_DAT6__UART2_RTS_B 0x334 0x71c 0x924 0x2 0x5 +#define MX6Q_PAD_SD4_DAT6__GPIO2_IO14 0x334 0x71c 0x000 0x5 0x0 +#define MX6Q_PAD_SD4_DAT7__SD4_DATA7 0x338 0x720 0x000 0x1 0x0 +#define MX6Q_PAD_SD4_DAT7__UART2_TX_DATA 0x338 0x720 0x000 0x2 0x0 +#define MX6Q_PAD_SD4_DAT7__UART2_RX_DATA 0x338 0x720 0x928 0x2 0x7 +#define MX6Q_PAD_SD4_DAT7__GPIO2_IO15 0x338 0x720 0x000 0x5 0x0 +#define MX6Q_PAD_SD1_DAT1__SD1_DATA1 0x33c 0x724 0x000 0x0 0x0 +#define MX6Q_PAD_SD1_DAT1__ECSPI5_SS0 0x33c 0x724 0x834 0x1 0x1 +#define MX6Q_PAD_SD1_DAT1__PWM3_OUT 0x33c 0x724 0x000 0x2 0x0 +#define MX6Q_PAD_SD1_DAT1__GPT_CAPTURE2 0x33c 0x724 0x000 0x3 0x0 +#define MX6Q_PAD_SD1_DAT1__GPIO1_IO17 0x33c 0x724 0x000 0x5 0x0 +#define MX6Q_PAD_SD1_DAT0__SD1_DATA0 0x340 0x728 0x000 0x0 0x0 +#define MX6Q_PAD_SD1_DAT0__ECSPI5_MISO 0x340 0x728 0x82c 0x1 0x1 +#define MX6Q_PAD_SD1_DAT0__GPT_CAPTURE1 0x340 0x728 0x000 0x3 0x0 +#define MX6Q_PAD_SD1_DAT0__GPIO1_IO16 0x340 0x728 0x000 0x5 0x0 +#define MX6Q_PAD_SD1_DAT3__SD1_DATA3 0x344 0x72c 0x000 0x0 0x0 +#define MX6Q_PAD_SD1_DAT3__ECSPI5_SS2 0x344 0x72c 0x000 0x1 0x0 +#define MX6Q_PAD_SD1_DAT3__GPT_COMPARE3 0x344 0x72c 0x000 0x2 0x0 +#define MX6Q_PAD_SD1_DAT3__PWM1_OUT 0x344 0x72c 0x000 0x3 0x0 +#define MX6Q_PAD_SD1_DAT3__WDOG2_B 0x344 0x72c 0x000 0x4 0x0 +#define MX6Q_PAD_SD1_DAT3__GPIO1_IO21 0x344 0x72c 0x000 0x5 0x0 +#define MX6Q_PAD_SD1_DAT3__WDOG2_RESET_B_DEB 0x344 0x72c 0x000 0x6 0x0 +#define MX6Q_PAD_SD1_CMD__SD1_CMD 0x348 0x730 0x000 0x0 0x0 +#define MX6Q_PAD_SD1_CMD__ECSPI5_MOSI 0x348 0x730 0x830 0x1 0x0 +#define MX6Q_PAD_SD1_CMD__PWM4_OUT 0x348 0x730 0x000 0x2 0x0 +#define MX6Q_PAD_SD1_CMD__GPT_COMPARE1 0x348 0x730 0x000 0x3 0x0 +#define MX6Q_PAD_SD1_CMD__GPIO1_IO18 0x348 0x730 0x000 0x5 0x0 +#define MX6Q_PAD_SD1_DAT2__SD1_DATA2 0x34c 0x734 0x000 0x0 0x0 +#define MX6Q_PAD_SD1_DAT2__ECSPI5_SS1 0x34c 0x734 0x838 0x1 0x1 +#define MX6Q_PAD_SD1_DAT2__GPT_COMPARE2 0x34c 0x734 0x000 0x2 0x0 +#define MX6Q_PAD_SD1_DAT2__PWM2_OUT 0x34c 0x734 0x000 0x3 0x0 +#define MX6Q_PAD_SD1_DAT2__WDOG1_B 0x34c 0x734 0x000 0x4 0x0 +#define MX6Q_PAD_SD1_DAT2__GPIO1_IO19 0x34c 0x734 0x000 0x5 0x0 +#define MX6Q_PAD_SD1_DAT2__WDOG1_RESET_B_DEB 0x34c 0x734 0x000 0x6 0x0 +#define MX6Q_PAD_SD1_CLK__SD1_CLK 0x350 0x738 0x000 0x0 0x0 +#define MX6Q_PAD_SD1_CLK__ECSPI5_SCLK 0x350 0x738 0x828 0x1 0x0 +#define MX6Q_PAD_SD1_CLK__GPT_CLKIN 0x350 0x738 0x000 0x3 0x0 +#define MX6Q_PAD_SD1_CLK__GPIO1_IO20 0x350 0x738 0x000 0x5 0x0 +#define MX6Q_PAD_SD2_CLK__SD2_CLK 0x354 0x73c 0x000 0x0 0x0 +#define MX6Q_PAD_SD2_CLK__ECSPI5_SCLK 0x354 0x73c 0x828 0x1 0x1 +#define MX6Q_PAD_SD2_CLK__KEY_COL5 0x354 0x73c 0x8e8 0x2 0x3 +#define MX6Q_PAD_SD2_CLK__AUD4_RXFS 0x354 0x73c 0x7c0 0x3 0x1 +#define MX6Q_PAD_SD2_CLK__GPIO1_IO10 0x354 0x73c 0x000 0x5 0x0 +#define MX6Q_PAD_SD2_CMD__SD2_CMD 0x358 0x740 0x000 0x0 0x0 +#define MX6Q_PAD_SD2_CMD__ECSPI5_MOSI 0x358 0x740 0x830 0x1 0x1 +#define MX6Q_PAD_SD2_CMD__KEY_ROW5 0x358 0x740 0x8f4 0x2 0x2 +#define MX6Q_PAD_SD2_CMD__AUD4_RXC 0x358 0x740 0x7bc 0x3 0x1 +#define MX6Q_PAD_SD2_CMD__GPIO1_IO11 0x358 0x740 0x000 0x5 0x0 +#define MX6Q_PAD_SD2_DAT3__SD2_DATA3 0x35c 0x744 0x000 0x0 0x0 +#define MX6Q_PAD_SD2_DAT3__ECSPI5_SS3 0x35c 0x744 0x000 0x1 0x0 +#define MX6Q_PAD_SD2_DAT3__KEY_COL6 0x35c 0x744 0x8ec 0x2 0x2 +#define MX6Q_PAD_SD2_DAT3__AUD4_TXC 0x35c 0x744 0x7c4 0x3 0x1 +#define MX6Q_PAD_SD2_DAT3__GPIO1_IO12 0x35c 0x744 0x000 0x5 0x0 + +#endif /* __DTS_IMX6Q_PINFUNC_H */ diff --git a/arch/arm/boot/dts/imx6q-sabreauto.dts b/arch/arm/boot/dts/imx6q-sabreauto.dts index 656d489122fe..49d6f2831ec9 100644 --- a/arch/arm/boot/dts/imx6q-sabreauto.dts +++ b/arch/arm/boot/dts/imx6q-sabreauto.dts @@ -11,15 +11,13 @@ */ /dts-v1/; -/include/ "imx6q.dtsi" + +#include "imx6q.dtsi" +#include "imx6qdl-sabreauto.dtsi" / { model = "Freescale i.MX6 Quad SABRE Automotive Board"; compatible = "fsl,imx6q-sabreauto", "fsl,imx6q"; - - memory { - reg = <0x10000000 0x80000000>; - }; }; &iomuxc { @@ -29,30 +27,9 @@ hog { pinctrl_hog: hoggrp { fsl,pins = < - 1376 0x80000000 /* MX6Q_PAD_NANDF_CS2__GPIO_6_15 */ - 13 0x80000000 /* MX6Q_PAD_SD2_DAT2__GPIO_1_13 */ + MX6Q_PAD_NANDF_CS2__GPIO6_IO15 0x80000000 + MX6Q_PAD_SD2_DAT2__GPIO1_IO13 0x80000000 >; }; }; }; - -&uart4 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart4_1>; - status = "okay"; -}; - -&fec { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet_2>; - phy-mode = "rgmii"; - status = "okay"; -}; - -&usdhc3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3_1>; - cd-gpios = <&gpio6 15 0>; - wp-gpios = <&gpio1 13 0>; - status = "okay"; -}; diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts index 2ce355cd05e5..6a000666c147 100644 --- a/arch/arm/boot/dts/imx6q-sabrelite.dts +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts @@ -11,7 +11,7 @@ */ /dts-v1/; -/include/ "imx6q.dtsi" +#include "imx6q.dtsi" / { model = "Freescale i.MX6 Quad SABRE Lite Board"; @@ -91,14 +91,14 @@ hog { pinctrl_hog: hoggrp { fsl,pins = < - 1450 0x80000000 /* MX6Q_PAD_NANDF_D6__GPIO_2_6 */ - 1458 0x80000000 /* MX6Q_PAD_NANDF_D7__GPIO_2_7 */ - 121 0x80000000 /* MX6Q_PAD_EIM_D19__GPIO_3_19 */ - 144 0x80000000 /* MX6Q_PAD_EIM_D22__GPIO_3_22 */ - 152 0x80000000 /* MX6Q_PAD_EIM_D23__GPIO_3_23 */ - 1262 0x80000000 /* MX6Q_PAD_SD3_DAT5__GPIO_7_0 */ - 1270 0x1f0b0 /* MX6Q_PAD_SD3_DAT4__GPIO_7_1 */ - 953 0x80000000 /* MX6Q_PAD_GPIO_0__CCM_CLKO */ + MX6Q_PAD_NANDF_D6__GPIO2_IO06 0x80000000 + MX6Q_PAD_NANDF_D7__GPIO2_IO07 0x80000000 + MX6Q_PAD_EIM_D19__GPIO3_IO19 0x80000000 + MX6Q_PAD_EIM_D22__GPIO3_IO22 0x80000000 + MX6Q_PAD_EIM_D23__GPIO3_IO23 0x80000000 + MX6Q_PAD_SD3_DAT5__GPIO7_IO00 0x80000000 + MX6Q_PAD_SD3_DAT4__GPIO7_IO01 0x1f0b0 + MX6Q_PAD_GPIO_0__CCM_CLKO1 0x80000000 >; }; }; diff --git a/arch/arm/boot/dts/imx6q-sabresd.dts b/arch/arm/boot/dts/imx6q-sabresd.dts index 2dea304a7980..442051350225 100644 --- a/arch/arm/boot/dts/imx6q-sabresd.dts +++ b/arch/arm/boot/dts/imx6q-sabresd.dts @@ -11,37 +11,13 @@ */ /dts-v1/; -/include/ "imx6q.dtsi" + +#include "imx6q.dtsi" +#include "imx6qdl-sabresd.dtsi" / { - model = "Freescale i.MX6Q SABRE Smart Device Board"; + model = "Freescale i.MX6 Quad SABRE Smart Device Board"; compatible = "fsl,imx6q-sabresd", "fsl,imx6q"; - - memory { - reg = <0x10000000 0x40000000>; - }; - - gpio-keys { - compatible = "gpio-keys"; - - volume-up { - label = "Volume Up"; - gpios = <&gpio1 4 0>; - linux,code = <115>; /* KEY_VOLUMEUP */ - }; - - volume-down { - label = "Volume Down"; - gpios = <&gpio1 5 0>; - linux,code = <114>; /* KEY_VOLUMEDOWN */ - }; - }; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1_1>; - status = "okay"; }; &iomuxc { @@ -51,36 +27,13 @@ hog { pinctrl_hog: hoggrp { fsl,pins = < - 1004 0x80000000 /* MX6Q_PAD_GPIO_4__GPIO_1_4 */ - 1012 0x80000000 /* MX6Q_PAD_GPIO_5__GPIO_1_5 */ - 1402 0x80000000 /* MX6Q_PAD_NANDF_D0__GPIO_2_0 */ - 1410 0x80000000 /* MX6Q_PAD_NANDF_D1__GPIO_2_1 */ - 1418 0x80000000 /* MX6Q_PAD_NANDF_D2__GPIO_2_2 */ - 1426 0x80000000 /* MX6Q_PAD_NANDF_D3__GPIO_2_3 */ + MX6Q_PAD_GPIO_4__GPIO1_IO04 0x80000000 + MX6Q_PAD_GPIO_5__GPIO1_IO05 0x80000000 + MX6Q_PAD_NANDF_D0__GPIO2_IO00 0x80000000 + MX6Q_PAD_NANDF_D1__GPIO2_IO01 0x80000000 + MX6Q_PAD_NANDF_D2__GPIO2_IO02 0x80000000 + MX6Q_PAD_NANDF_D3__GPIO2_IO03 0x80000000 >; }; }; }; - -&fec { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet_1>; - phy-mode = "rgmii"; - status = "okay"; -}; - -&usdhc2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc2_1>; - cd-gpios = <&gpio2 2 0>; - wp-gpios = <&gpio2 3 0>; - status = "okay"; -}; - -&usdhc3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3_1>; - cd-gpios = <&gpio2 0 0>; - wp-gpios = <&gpio2 1 0>; - status = "okay"; -}; diff --git a/arch/arm/boot/dts/imx6q-sbc6x.dts b/arch/arm/boot/dts/imx6q-sbc6x.dts new file mode 100644 index 000000000000..ee6addf149af --- /dev/null +++ b/arch/arm/boot/dts/imx6q-sbc6x.dts @@ -0,0 +1,44 @@ +/* + * Copyright 2013 Pavel Machek <pavel@denx.de> + * + * The code contained herein is licensed under the GNU General Public + * License V2. + */ + +/dts-v1/; +#include "imx6q.dtsi" + +/ { + model = "MicroSys sbc6x board"; + compatible = "microsys,sbc6x", "fsl,imx6q"; + + memory { + reg = <0x10000000 0x80000000>; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet_1>; + phy-mode = "rgmii"; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_1>; + status = "okay"; +}; + +&usbotg { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg_1>; + disable-over-current; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3_2>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index cba021eb035e..21e675848bd1 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -8,7 +8,8 @@ * */ -/include/ "imx6qdl.dtsi" +#include "imx6qdl.dtsi" +#include "imx6q-pinfunc.h" / { cpus { @@ -78,10 +79,19 @@ audmux { pinctrl_audmux_1: audmux-1 { fsl,pins = < - 18 0x80000000 /* MX6Q_PAD_SD2_DAT0__AUDMUX_AUD4_RXD */ - 1586 0x80000000 /* MX6Q_PAD_SD2_DAT3__AUDMUX_AUD4_TXC */ - 11 0x80000000 /* MX6Q_PAD_SD2_DAT2__AUDMUX_AUD4_TXD */ - 3 0x80000000 /* MX6Q_PAD_SD2_DAT1__AUDMUX_AUD4_TXFS */ + MX6Q_PAD_SD2_DAT0__AUD4_RXD 0x80000000 + MX6Q_PAD_SD2_DAT3__AUD4_TXC 0x80000000 + MX6Q_PAD_SD2_DAT2__AUD4_TXD 0x80000000 + MX6Q_PAD_SD2_DAT1__AUD4_TXFS 0x80000000 + >; + }; + + pinctrl_audmux_2: audmux-2 { + fsl,pins = < + MX6Q_PAD_CSI0_DAT7__AUD3_RXD 0x80000000 + MX6Q_PAD_CSI0_DAT4__AUD3_TXC 0x80000000 + MX6Q_PAD_CSI0_DAT5__AUD3_TXD 0x80000000 + MX6Q_PAD_CSI0_DAT6__AUD3_TXFS 0x80000000 >; }; }; @@ -89,9 +99,19 @@ ecspi1 { pinctrl_ecspi1_1: ecspi1grp-1 { fsl,pins = < - 101 0x100b1 /* MX6Q_PAD_EIM_D17__ECSPI1_MISO */ - 109 0x100b1 /* MX6Q_PAD_EIM_D18__ECSPI1_MOSI */ - 94 0x100b1 /* MX6Q_PAD_EIM_D16__ECSPI1_SCLK */ + MX6Q_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6Q_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6Q_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + >; + }; + }; + + ecspi3 { + pinctrl_ecspi3_1: ecspi3grp-1 { + fsl,pins = < + MX6Q_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 + MX6Q_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 + MX6Q_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 >; }; }; @@ -99,42 +119,42 @@ enet { pinctrl_enet_1: enetgrp-1 { fsl,pins = < - 695 0x1b0b0 /* MX6Q_PAD_ENET_MDIO__ENET_MDIO */ - 756 0x1b0b0 /* MX6Q_PAD_ENET_MDC__ENET_MDC */ - 24 0x1b0b0 /* MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC */ - 30 0x1b0b0 /* MX6Q_PAD_RGMII_TD0__ENET_RGMII_TD0 */ - 34 0x1b0b0 /* MX6Q_PAD_RGMII_TD1__ENET_RGMII_TD1 */ - 39 0x1b0b0 /* MX6Q_PAD_RGMII_TD2__ENET_RGMII_TD2 */ - 44 0x1b0b0 /* MX6Q_PAD_RGMII_TD3__ENET_RGMII_TD3 */ - 56 0x1b0b0 /* MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL */ - 702 0x1b0b0 /* MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK */ - 74 0x1b0b0 /* MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC */ - 52 0x1b0b0 /* MX6Q_PAD_RGMII_RD0__ENET_RGMII_RD0 */ - 61 0x1b0b0 /* MX6Q_PAD_RGMII_RD1__ENET_RGMII_RD1 */ - 66 0x1b0b0 /* MX6Q_PAD_RGMII_RD2__ENET_RGMII_RD2 */ - 70 0x1b0b0 /* MX6Q_PAD_RGMII_RD3__ENET_RGMII_RD3 */ - 48 0x1b0b0 /* MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL */ - 1033 0x4001b0a8 /* MX6Q_PAD_GPIO_16__ENET_ANATOP_ETHERNET_REF_OUT*/ + MX6Q_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6Q_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6Q_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 + MX6Q_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 + MX6Q_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 + MX6Q_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 + MX6Q_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 + MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6Q_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6Q_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6Q_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6Q_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6Q_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + MX6Q_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 >; }; pinctrl_enet_2: enetgrp-2 { fsl,pins = < - 890 0x1b0b0 /* MX6Q_PAD_KEY_COL1__ENET_MDIO */ - 909 0x1b0b0 /* MX6Q_PAD_KEY_COL2__ENET_MDC */ - 24 0x1b0b0 /* MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC */ - 30 0x1b0b0 /* MX6Q_PAD_RGMII_TD0__ENET_RGMII_TD0 */ - 34 0x1b0b0 /* MX6Q_PAD_RGMII_TD1__ENET_RGMII_TD1 */ - 39 0x1b0b0 /* MX6Q_PAD_RGMII_TD2__ENET_RGMII_TD2 */ - 44 0x1b0b0 /* MX6Q_PAD_RGMII_TD3__ENET_RGMII_TD3 */ - 56 0x1b0b0 /* MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL */ - 702 0x1b0b0 /* MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK */ - 74 0x1b0b0 /* MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC */ - 52 0x1b0b0 /* MX6Q_PAD_RGMII_RD0__ENET_RGMII_RD0 */ - 61 0x1b0b0 /* MX6Q_PAD_RGMII_RD1__ENET_RGMII_RD1 */ - 66 0x1b0b0 /* MX6Q_PAD_RGMII_RD2__ENET_RGMII_RD2 */ - 70 0x1b0b0 /* MX6Q_PAD_RGMII_RD3__ENET_RGMII_RD3 */ - 48 0x1b0b0 /* MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL */ + MX6Q_PAD_KEY_COL1__ENET_MDIO 0x1b0b0 + MX6Q_PAD_KEY_COL2__ENET_MDC 0x1b0b0 + MX6Q_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 + MX6Q_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 + MX6Q_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 + MX6Q_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 + MX6Q_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 + MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6Q_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6Q_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6Q_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6Q_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6Q_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 >; }; }; @@ -142,25 +162,25 @@ gpmi-nand { pinctrl_gpmi_nand_1: gpmi-nand-1 { fsl,pins = < - 1328 0xb0b1 /* MX6Q_PAD_NANDF_CLE__RAWNAND_CLE */ - 1336 0xb0b1 /* MX6Q_PAD_NANDF_ALE__RAWNAND_ALE */ - 1344 0xb0b1 /* MX6Q_PAD_NANDF_WP_B__RAWNAND_RESETN */ - 1352 0xb000 /* MX6Q_PAD_NANDF_RB0__RAWNAND_READY0 */ - 1360 0xb0b1 /* MX6Q_PAD_NANDF_CS0__RAWNAND_CE0N */ - 1365 0xb0b1 /* MX6Q_PAD_NANDF_CS1__RAWNAND_CE1N */ - 1371 0xb0b1 /* MX6Q_PAD_NANDF_CS2__RAWNAND_CE2N */ - 1378 0xb0b1 /* MX6Q_PAD_NANDF_CS3__RAWNAND_CE3N */ - 1387 0xb0b1 /* MX6Q_PAD_SD4_CMD__RAWNAND_RDN */ - 1393 0xb0b1 /* MX6Q_PAD_SD4_CLK__RAWNAND_WRN */ - 1397 0xb0b1 /* MX6Q_PAD_NANDF_D0__RAWNAND_D0 */ - 1405 0xb0b1 /* MX6Q_PAD_NANDF_D1__RAWNAND_D1 */ - 1413 0xb0b1 /* MX6Q_PAD_NANDF_D2__RAWNAND_D2 */ - 1421 0xb0b1 /* MX6Q_PAD_NANDF_D3__RAWNAND_D3 */ - 1429 0xb0b1 /* MX6Q_PAD_NANDF_D4__RAWNAND_D4 */ - 1437 0xb0b1 /* MX6Q_PAD_NANDF_D5__RAWNAND_D5 */ - 1445 0xb0b1 /* MX6Q_PAD_NANDF_D6__RAWNAND_D6 */ - 1453 0xb0b1 /* MX6Q_PAD_NANDF_D7__RAWNAND_D7 */ - 1463 0x00b1 /* MX6Q_PAD_SD4_DAT0__RAWNAND_DQS */ + MX6Q_PAD_NANDF_CLE__NAND_CLE 0xb0b1 + MX6Q_PAD_NANDF_ALE__NAND_ALE 0xb0b1 + MX6Q_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 + MX6Q_PAD_NANDF_RB0__NAND_READY_B 0xb000 + MX6Q_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 + MX6Q_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 + MX6Q_PAD_NANDF_CS2__NAND_CE2_B 0xb0b1 + MX6Q_PAD_NANDF_CS3__NAND_CE3_B 0xb0b1 + MX6Q_PAD_SD4_CMD__NAND_RE_B 0xb0b1 + MX6Q_PAD_SD4_CLK__NAND_WE_B 0xb0b1 + MX6Q_PAD_NANDF_D0__NAND_DATA00 0xb0b1 + MX6Q_PAD_NANDF_D1__NAND_DATA01 0xb0b1 + MX6Q_PAD_NANDF_D2__NAND_DATA02 0xb0b1 + MX6Q_PAD_NANDF_D3__NAND_DATA03 0xb0b1 + MX6Q_PAD_NANDF_D4__NAND_DATA04 0xb0b1 + MX6Q_PAD_NANDF_D5__NAND_DATA05 0xb0b1 + MX6Q_PAD_NANDF_D6__NAND_DATA06 0xb0b1 + MX6Q_PAD_NANDF_D7__NAND_DATA07 0xb0b1 + MX6Q_PAD_SD4_DAT0__NAND_DQS 0x00b1 >; }; }; @@ -168,8 +188,26 @@ i2c1 { pinctrl_i2c1_1: i2c1grp-1 { fsl,pins = < - 137 0x4001b8b1 /* MX6Q_PAD_EIM_D21__I2C1_SCL */ - 196 0x4001b8b1 /* MX6Q_PAD_EIM_D28__I2C1_SDA */ + MX6Q_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6Q_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + }; + + i2c2 { + pinctrl_i2c2_1: i2c2grp-1 { + fsl,pins = < + MX6Q_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1 + MX6Q_PAD_EIM_D16__I2C2_SDA 0x4001b8b1 + >; + }; + }; + + i2c3 { + pinctrl_i2c3_1: i2c3grp-1 { + fsl,pins = < + MX6Q_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 + MX6Q_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 >; }; }; @@ -177,8 +215,8 @@ uart1 { pinctrl_uart1_1: uart1grp-1 { fsl,pins = < - 1140 0x1b0b1 /* MX6Q_PAD_CSI0_DAT10__UART1_TXD */ - 1148 0x1b0b1 /* MX6Q_PAD_CSI0_DAT11__UART1_RXD */ + MX6Q_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6Q_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 >; }; }; @@ -186,8 +224,8 @@ uart2 { pinctrl_uart2_1: uart2grp-1 { fsl,pins = < - 183 0x1b0b1 /* MX6Q_PAD_EIM_D26__UART2_TXD */ - 191 0x1b0b1 /* MX6Q_PAD_EIM_D27__UART2_RXD */ + MX6Q_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + MX6Q_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 >; }; }; @@ -195,8 +233,8 @@ uart4 { pinctrl_uart4_1: uart4grp-1 { fsl,pins = < - 877 0x1b0b1 /* MX6Q_PAD_KEY_COL0__UART4_TXD */ - 885 0x1b0b1 /* MX6Q_PAD_KEY_ROW0__UART4_RXD */ + MX6Q_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6Q_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 >; }; }; @@ -204,7 +242,13 @@ usbotg { pinctrl_usbotg_1: usbotggrp-1 { fsl,pins = < - 1592 0x17059 /* MX6Q_PAD_GPIO_1__ANATOP_USBOTG_ID */ + MX6Q_PAD_GPIO_1__USB_OTG_ID 0x17059 + >; + }; + + pinctrl_usbotg_2: usbotggrp-2 { + fsl,pins = < + MX6Q_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 >; }; }; @@ -212,16 +256,16 @@ usdhc2 { pinctrl_usdhc2_1: usdhc2grp-1 { fsl,pins = < - 1577 0x17059 /* MX6Q_PAD_SD2_CMD__USDHC2_CMD */ - 1569 0x10059 /* MX6Q_PAD_SD2_CLK__USDHC2_CLK */ - 16 0x17059 /* MX6Q_PAD_SD2_DAT0__USDHC2_DAT0 */ - 0 0x17059 /* MX6Q_PAD_SD2_DAT1__USDHC2_DAT1 */ - 8 0x17059 /* MX6Q_PAD_SD2_DAT2__USDHC2_DAT2 */ - 1583 0x17059 /* MX6Q_PAD_SD2_DAT3__USDHC2_DAT3 */ - 1430 0x17059 /* MX6Q_PAD_NANDF_D4__USDHC2_DAT4 */ - 1438 0x17059 /* MX6Q_PAD_NANDF_D5__USDHC2_DAT5 */ - 1446 0x17059 /* MX6Q_PAD_NANDF_D6__USDHC2_DAT6 */ - 1454 0x17059 /* MX6Q_PAD_NANDF_D7__USDHC2_DAT7 */ + MX6Q_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6Q_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6Q_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6Q_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6Q_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6Q_PAD_SD2_DAT3__SD2_DATA3 0x17059 + MX6Q_PAD_NANDF_D4__SD2_DATA4 0x17059 + MX6Q_PAD_NANDF_D5__SD2_DATA5 0x17059 + MX6Q_PAD_NANDF_D6__SD2_DATA6 0x17059 + MX6Q_PAD_NANDF_D7__SD2_DATA7 0x17059 >; }; }; @@ -229,27 +273,27 @@ usdhc3 { pinctrl_usdhc3_1: usdhc3grp-1 { fsl,pins = < - 1273 0x17059 /* MX6Q_PAD_SD3_CMD__USDHC3_CMD */ - 1281 0x10059 /* MX6Q_PAD_SD3_CLK__USDHC3_CLK */ - 1289 0x17059 /* MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 */ - 1297 0x17059 /* MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 */ - 1305 0x17059 /* MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 */ - 1312 0x17059 /* MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 */ - 1265 0x17059 /* MX6Q_PAD_SD3_DAT4__USDHC3_DAT4 */ - 1257 0x17059 /* MX6Q_PAD_SD3_DAT5__USDHC3_DAT5 */ - 1249 0x17059 /* MX6Q_PAD_SD3_DAT6__USDHC3_DAT6 */ - 1241 0x17059 /* MX6Q_PAD_SD3_DAT7__USDHC3_DAT7 */ + MX6Q_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6Q_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6Q_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6Q_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6Q_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6Q_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6Q_PAD_SD3_DAT4__SD3_DATA4 0x17059 + MX6Q_PAD_SD3_DAT5__SD3_DATA5 0x17059 + MX6Q_PAD_SD3_DAT6__SD3_DATA6 0x17059 + MX6Q_PAD_SD3_DAT7__SD3_DATA7 0x17059 >; }; pinctrl_usdhc3_2: usdhc3grp-2 { fsl,pins = < - 1273 0x17059 /* MX6Q_PAD_SD3_CMD__USDHC3_CMD */ - 1281 0x10059 /* MX6Q_PAD_SD3_CLK__USDHC3_CLK */ - 1289 0x17059 /* MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 */ - 1297 0x17059 /* MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 */ - 1305 0x17059 /* MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 */ - 1312 0x17059 /* MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 */ + MX6Q_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6Q_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6Q_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6Q_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6Q_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6Q_PAD_SD3_DAT3__SD3_DATA3 0x17059 >; }; }; @@ -257,27 +301,27 @@ usdhc4 { pinctrl_usdhc4_1: usdhc4grp-1 { fsl,pins = < - 1386 0x17059 /* MX6Q_PAD_SD4_CMD__USDHC4_CMD */ - 1392 0x10059 /* MX6Q_PAD_SD4_CLK__USDHC4_CLK */ - 1462 0x17059 /* MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 */ - 1470 0x17059 /* MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 */ - 1478 0x17059 /* MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 */ - 1486 0x17059 /* MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 */ - 1493 0x17059 /* MX6Q_PAD_SD4_DAT4__USDHC4_DAT4 */ - 1501 0x17059 /* MX6Q_PAD_SD4_DAT5__USDHC4_DAT5 */ - 1509 0x17059 /* MX6Q_PAD_SD4_DAT6__USDHC4_DAT6 */ - 1517 0x17059 /* MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 */ + MX6Q_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6Q_PAD_SD4_CLK__SD4_CLK 0x10059 + MX6Q_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6Q_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6Q_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6Q_PAD_SD4_DAT3__SD4_DATA3 0x17059 + MX6Q_PAD_SD4_DAT4__SD4_DATA4 0x17059 + MX6Q_PAD_SD4_DAT5__SD4_DATA5 0x17059 + MX6Q_PAD_SD4_DAT6__SD4_DATA6 0x17059 + MX6Q_PAD_SD4_DAT7__SD4_DATA7 0x17059 >; }; pinctrl_usdhc4_2: usdhc4grp-2 { fsl,pins = < - 1386 0x17059 /* MX6Q_PAD_SD4_CMD__USDHC4_CMD */ - 1392 0x10059 /* MX6Q_PAD_SD4_CLK__USDHC4_CLK */ - 1462 0x17059 /* MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 */ - 1470 0x17059 /* MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 */ - 1478 0x17059 /* MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 */ - 1486 0x17059 /* MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 */ + MX6Q_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6Q_PAD_SD4_CLK__SD4_CLK 0x10059 + MX6Q_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6Q_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6Q_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6Q_PAD_SD4_DAT3__SD4_DATA3 0x17059 >; }; }; @@ -291,6 +335,24 @@ interrupts = <0 8 0x4 0 7 0x4>; clocks = <&clks 133>, <&clks 134>, <&clks 137>; clock-names = "bus", "di0", "di1"; + resets = <&src 4>; }; }; }; + +&ldb { + clocks = <&clks 33>, <&clks 34>, + <&clks 39>, <&clks 40>, <&clks 41>, <&clks 42>, + <&clks 135>, <&clks 136>; + clock-names = "di0_pll", "di1_pll", + "di0_sel", "di1_sel", "di2_sel", "di3_sel", + "di0", "di1"; + + lvds-channel@0 { + crtcs = <&ipu1 0>, <&ipu1 1>, <&ipu2 0>, <&ipu2 1>; + }; + + lvds-channel@1 { + crtcs = <&ipu1 0>, <&ipu1 1>, <&ipu2 0>, <&ipu2 1>; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi new file mode 100644 index 000000000000..4d237cffcc41 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -0,0 +1,38 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/ { + memory { + reg = <0x10000000 0x80000000>; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet_2>; + phy-mode = "rgmii"; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4_1>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3_1>; + cd-gpios = <&gpio6 15 0>; + wp-gpios = <&gpio1 13 0>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi new file mode 100644 index 000000000000..e21f6a89cf0f --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -0,0 +1,87 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/ { + memory { + reg = <0x10000000 0x40000000>; + }; + + regulators { + compatible = "simple-bus"; + + reg_usb_otg_vbus: usb_otg_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 0>; + enable-active-high; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + volume-up { + label = "Volume Up"; + gpios = <&gpio1 4 0>; + linux,code = <115>; /* KEY_VOLUMEUP */ + }; + + volume-down { + label = "Volume Down"; + gpios = <&gpio1 5 0>; + linux,code = <114>; /* KEY_VOLUMEDOWN */ + }; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet_1>; + phy-mode = "rgmii"; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_1>; + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg_2>; + disable-over-current; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2_1>; + cd-gpios = <&gpio2 2 0>; + wp-gpios = <&gpio2 3 0>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3_1>; + cd-gpios = <&gpio2 0 0>; + wp-gpios = <&gpio2 1 0>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 281a223591ff..9e8296e4c343 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -10,7 +10,7 @@ * http://www.gnu.org/copyleft/gpl.html */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" / { aliases { @@ -65,9 +65,13 @@ interrupt-parent = <&intc>; ranges; - dma-apbh@00110000 { + dma_apbh: dma-apbh@00110000 { compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh"; reg = <0x00110000 0x2000>; + interrupts = <0 13 0x04>, <0 13 0x04>, <0 13 0x04>, <0 13 0x04>; + interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3"; + #dma-cells = <1>; + dma-channels = <4>; clocks = <&clks 106>; }; @@ -83,6 +87,8 @@ <&clks 150>, <&clks 149>; clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch", "gpmi_bch_apb", "per1_bch"; + dmas = <&dma_apbh 0>; + dma-names = "rx-tx"; fsl,gpmi-dma-channel = <0>; status = "disabled"; }; @@ -102,6 +108,11 @@ cache-level = <2>; }; + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = <0 94 0x04>; + }; + aips-bus@02000000 { /* AIPS1 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; @@ -278,6 +289,8 @@ compatible = "fsl,imx6q-gpt"; reg = <0x02098000 0x4000>; interrupts = <0 55 0x04>; + clocks = <&clks 119>, <&clks 120>; + clock-names = "ipg", "per"; }; gpio1: gpio@0209c000 { @@ -514,9 +527,10 @@ }; src: src@020d8000 { - compatible = "fsl,imx6q-src"; + compatible = "fsl,imx6q-src", "fsl,imx51-src"; reg = <0x020d8000 0x4000>; interrupts = <0 91 0x04 0 96 0x04>; + #reset-cells = <1>; }; gpc: gpc@020dc000 { @@ -530,6 +544,26 @@ reg = <0x020e0000 0x38>; }; + ldb: ldb@020e0008 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6q-ldb", "fsl,imx53-ldb"; + gpr = <&gpr>; + status = "disabled"; + + lvds-channel@0 { + reg = <0>; + crtcs = <&ipu1 0>; + status = "disabled"; + }; + + lvds-channel@1 { + reg = <1>; + crtcs = <&ipu1 1>; + status = "disabled"; + }; + }; + dcic1: dcic@020e4000 { reg = <0x020e4000 0x4000>; interrupts = <0 124 0x04>; @@ -796,6 +830,7 @@ interrupts = <0 6 0x4 0 5 0x4>; clocks = <&clks 130>, <&clks 131>, <&clks 132>; clock-names = "bus", "di0", "di1"; + resets = <&src 2>; }; }; }; diff --git a/arch/arm/boot/dts/imx6sl-pinfunc.h b/arch/arm/boot/dts/imx6sl-pinfunc.h new file mode 100644 index 000000000000..77b17bcc7b70 --- /dev/null +++ b/arch/arm/boot/dts/imx6sl-pinfunc.h @@ -0,0 +1,1077 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __DTS_IMX6SL_PINFUNC_H +#define __DTS_IMX6SL_PINFUNC_H + +/* + * The pin function ID is a tuple of + * <mux_reg conf_reg input_reg mux_mode input_val> + */ +#define MX6SL_PAD_AUD_MCLK__AUDIO_CLK_OUT 0x04c 0x2a4 0x000 0x0 0x0 +#define MX6SL_PAD_AUD_MCLK__PWM4_OUT 0x04c 0x2a4 0x000 0x1 0x0 +#define MX6SL_PAD_AUD_MCLK__ECSPI3_RDY 0x04c 0x2a4 0x6b4 0x2 0x0 +#define MX6SL_PAD_AUD_MCLK__FEC_MDC 0x04c 0x2a4 0x000 0x3 0x0 +#define MX6SL_PAD_AUD_MCLK__WDOG2_RESET_B_DEB 0x04c 0x2a4 0x000 0x4 0x0 +#define MX6SL_PAD_AUD_MCLK__GPIO1_IO06 0x04c 0x2a4 0x000 0x5 0x0 +#define MX6SL_PAD_AUD_MCLK__SPDIF_EXT_CLK 0x04c 0x2a4 0x7f4 0x6 0x0 +#define MX6SL_PAD_AUD_RXC__AUD3_RXC 0x050 0x2a8 0x000 0x0 0x0 +#define MX6SL_PAD_AUD_RXC__I2C1_SDA 0x050 0x2a8 0x720 0x1 0x0 +#define MX6SL_PAD_AUD_RXC__UART3_TX_DATA 0x050 0x2a8 0x000 0x2 0x0 +#define MX6SL_PAD_AUD_RXC__UART3_RX_DATA 0x050 0x2a8 0x80c 0x2 0x0 +#define MX6SL_PAD_AUD_RXC__FEC_TX_CLK 0x050 0x2a8 0x70c 0x3 0x0 +#define MX6SL_PAD_AUD_RXC__I2C3_SDA 0x050 0x2a8 0x730 0x4 0x0 +#define MX6SL_PAD_AUD_RXC__GPIO1_IO01 0x050 0x2a8 0x000 0x5 0x0 +#define MX6SL_PAD_AUD_RXC__ECSPI3_SS1 0x050 0x2a8 0x6c4 0x6 0x0 +#define MX6SL_PAD_AUD_RXD__AUD3_RXD 0x054 0x2ac 0x000 0x0 0x0 +#define MX6SL_PAD_AUD_RXD__ECSPI3_MOSI 0x054 0x2ac 0x6bc 0x1 0x0 +#define MX6SL_PAD_AUD_RXD__UART4_RX_DATA 0x054 0x2ac 0x814 0x2 0x0 +#define MX6SL_PAD_AUD_RXD__UART4_TX_DATA 0x054 0x2ac 0x000 0x2 0x0 +#define MX6SL_PAD_AUD_RXD__FEC_RX_ER 0x054 0x2ac 0x708 0x3 0x0 +#define MX6SL_PAD_AUD_RXD__SD1_LCTL 0x054 0x2ac 0x000 0x4 0x0 +#define MX6SL_PAD_AUD_RXD__GPIO1_IO02 0x054 0x2ac 0x000 0x5 0x0 +#define MX6SL_PAD_AUD_RXFS__AUD3_RXFS 0x058 0x2b0 0x000 0x0 0x0 +#define MX6SL_PAD_AUD_RXFS__I2C1_SCL 0x058 0x2b0 0x71c 0x1 0x0 +#define MX6SL_PAD_AUD_RXFS__UART3_RX_DATA 0x058 0x2b0 0x80c 0x2 0x1 +#define MX6SL_PAD_AUD_RXFS__UART3_TX_DATA 0x058 0x2b0 0x000 0x2 0x0 +#define MX6SL_PAD_AUD_RXFS__FEC_MDIO 0x058 0x2b0 0x6f4 0x3 0x0 +#define MX6SL_PAD_AUD_RXFS__I2C3_SCL 0x058 0x2b0 0x72c 0x4 0x0 +#define MX6SL_PAD_AUD_RXFS__GPIO1_IO00 0x058 0x2b0 0x000 0x5 0x0 +#define MX6SL_PAD_AUD_RXFS__ECSPI3_SS0 0x058 0x2b0 0x6c0 0x6 0x0 +#define MX6SL_PAD_AUD_TXC__AUD3_TXC 0x05c 0x2b4 0x000 0x0 0x0 +#define MX6SL_PAD_AUD_TXC__ECSPI3_MISO 0x05c 0x2b4 0x6b8 0x1 0x0 +#define MX6SL_PAD_AUD_TXC__UART4_TX_DATA 0x05c 0x2b4 0x000 0x2 0x0 +#define MX6SL_PAD_AUD_TXC__UART4_RX_DATA 0x05c 0x2b4 0x814 0x2 0x1 +#define MX6SL_PAD_AUD_TXC__FEC_RX_DV 0x05c 0x2b4 0x704 0x3 0x0 +#define MX6SL_PAD_AUD_TXC__SD2_LCTL 0x05c 0x2b4 0x000 0x4 0x0 +#define MX6SL_PAD_AUD_TXC__GPIO1_IO03 0x05c 0x2b4 0x000 0x5 0x0 +#define MX6SL_PAD_AUD_TXD__AUD3_TXD 0x060 0x2b8 0x000 0x0 0x0 +#define MX6SL_PAD_AUD_TXD__ECSPI3_SCLK 0x060 0x2b8 0x6b0 0x1 0x0 +#define MX6SL_PAD_AUD_TXD__UART4_CTS_B 0x060 0x2b8 0x000 0x2 0x0 +#define MX6SL_PAD_AUD_TXD__UART4_RTS_B 0x060 0x2b8 0x810 0x2 0x0 +#define MX6SL_PAD_AUD_TXD__FEC_TX_DATA0 0x060 0x2b8 0x000 0x3 0x0 +#define MX6SL_PAD_AUD_TXD__SD4_LCTL 0x060 0x2b8 0x000 0x4 0x0 +#define MX6SL_PAD_AUD_TXD__GPIO1_IO05 0x060 0x2b8 0x000 0x5 0x0 +#define MX6SL_PAD_AUD_TXFS__AUD3_TXFS 0x064 0x2bc 0x000 0x0 0x0 +#define MX6SL_PAD_AUD_TXFS__PWM3_OUT 0x064 0x2bc 0x000 0x1 0x0 +#define MX6SL_PAD_AUD_TXFS__UART4_RTS_B 0x064 0x2bc 0x810 0x2 0x1 +#define MX6SL_PAD_AUD_TXFS__UART4_CTS_B 0x064 0x2bc 0x000 0x2 0x0 +#define MX6SL_PAD_AUD_TXFS__FEC_RX_DATA1 0x064 0x2bc 0x6fc 0x3 0x0 +#define MX6SL_PAD_AUD_TXFS__SD3_LCTL 0x064 0x2bc 0x000 0x4 0x0 +#define MX6SL_PAD_AUD_TXFS__GPIO1_IO04 0x064 0x2bc 0x000 0x5 0x0 +#define MX6SL_PAD_ECSPI1_MISO__ECSPI1_MISO 0x068 0x358 0x684 0x0 0x0 +#define MX6SL_PAD_ECSPI1_MISO__AUD4_TXFS 0x068 0x358 0x5f8 0x1 0x0 +#define MX6SL_PAD_ECSPI1_MISO__UART5_RTS_B 0x068 0x358 0x818 0x2 0x0 +#define MX6SL_PAD_ECSPI1_MISO__UART5_CTS_B 0x068 0x358 0x000 0x2 0x0 +#define MX6SL_PAD_ECSPI1_MISO__EPDC_BDR0 0x068 0x358 0x000 0x3 0x0 +#define MX6SL_PAD_ECSPI1_MISO__SD2_WP 0x068 0x358 0x834 0x4 0x0 +#define MX6SL_PAD_ECSPI1_MISO__GPIO4_IO10 0x068 0x358 0x000 0x5 0x0 +#define MX6SL_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x06c 0x35c 0x688 0x0 0x0 +#define MX6SL_PAD_ECSPI1_MOSI__AUD4_TXC 0x06c 0x35c 0x5f4 0x1 0x0 +#define MX6SL_PAD_ECSPI1_MOSI__UART5_TX_DATA 0x06c 0x35c 0x000 0x2 0x0 +#define MX6SL_PAD_ECSPI1_MOSI__UART5_RX_DATA 0x06c 0x35c 0x81c 0x2 0x0 +#define MX6SL_PAD_ECSPI1_MOSI__EPDC_VCOM1 0x06c 0x35c 0x000 0x3 0x0 +#define MX6SL_PAD_ECSPI1_MOSI__SD2_VSELECT 0x06c 0x35c 0x000 0x4 0x0 +#define MX6SL_PAD_ECSPI1_MOSI__GPIO4_IO09 0x06c 0x35c 0x000 0x5 0x0 +#define MX6SL_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x070 0x360 0x67c 0x0 0x0 +#define MX6SL_PAD_ECSPI1_SCLK__AUD4_TXD 0x070 0x360 0x5e8 0x1 0x0 +#define MX6SL_PAD_ECSPI1_SCLK__UART5_RX_DATA 0x070 0x360 0x81c 0x2 0x1 +#define MX6SL_PAD_ECSPI1_SCLK__UART5_TX_DATA 0x070 0x360 0x000 0x2 0x0 +#define MX6SL_PAD_ECSPI1_SCLK__EPDC_VCOM0 0x070 0x360 0x000 0x3 0x0 +#define MX6SL_PAD_ECSPI1_SCLK__SD2_RESET 0x070 0x360 0x000 0x4 0x0 +#define MX6SL_PAD_ECSPI1_SCLK__GPIO4_IO08 0x070 0x360 0x000 0x5 0x0 +#define MX6SL_PAD_ECSPI1_SCLK__USB_OTG2_OC 0x070 0x360 0x820 0x6 0x0 +#define MX6SL_PAD_ECSPI1_SS0__ECSPI1_SS0 0x074 0x364 0x68c 0x0 0x0 +#define MX6SL_PAD_ECSPI1_SS0__AUD4_RXD 0x074 0x364 0x5e4 0x1 0x0 +#define MX6SL_PAD_ECSPI1_SS0__UART5_CTS_B 0x074 0x364 0x000 0x2 0x0 +#define MX6SL_PAD_ECSPI1_SS0__UART5_RTS_B 0x074 0x364 0x818 0x2 0x1 +#define MX6SL_PAD_ECSPI1_SS0__EPDC_BDR1 0x074 0x364 0x000 0x3 0x0 +#define MX6SL_PAD_ECSPI1_SS0__SD2_CD_B 0x074 0x364 0x830 0x4 0x0 +#define MX6SL_PAD_ECSPI1_SS0__GPIO4_IO11 0x074 0x364 0x000 0x5 0x0 +#define MX6SL_PAD_ECSPI1_SS0__USB_OTG2_PWR 0x074 0x364 0x000 0x6 0x0 +#define MX6SL_PAD_ECSPI2_MISO__ECSPI2_MISO 0x078 0x368 0x6a0 0x0 0x0 +#define MX6SL_PAD_ECSPI2_MISO__SDMA_EXT_EVENT0 0x078 0x368 0x000 0x1 0x0 +#define MX6SL_PAD_ECSPI2_MISO__UART3_RTS_B 0x078 0x368 0x808 0x2 0x0 +#define MX6SL_PAD_ECSPI2_MISO__UART3_CTS_B 0x078 0x368 0x000 0x2 0x0 +#define MX6SL_PAD_ECSPI2_MISO__CSI_MCLK 0x078 0x368 0x000 0x3 0x0 +#define MX6SL_PAD_ECSPI2_MISO__SD1_WP 0x078 0x368 0x82c 0x4 0x0 +#define MX6SL_PAD_ECSPI2_MISO__GPIO4_IO14 0x078 0x368 0x000 0x5 0x0 +#define MX6SL_PAD_ECSPI2_MISO__USB_OTG1_OC 0x078 0x368 0x824 0x6 0x0 +#define MX6SL_PAD_ECSPI2_MOSI__ECSPI2_MOSI 0x07c 0x36c 0x6a4 0x0 0x0 +#define MX6SL_PAD_ECSPI2_MOSI__SDMA_EXT_EVENT1 0x07c 0x36c 0x000 0x1 0x0 +#define MX6SL_PAD_ECSPI2_MOSI__UART3_TX_DATA 0x07c 0x36c 0x000 0x2 0x0 +#define MX6SL_PAD_ECSPI2_MOSI__UART3_RX_DATA 0x07c 0x36c 0x80c 0x2 0x2 +#define MX6SL_PAD_ECSPI2_MOSI__CSI_HSYNC 0x07c 0x36c 0x670 0x3 0x0 +#define MX6SL_PAD_ECSPI2_MOSI__SD1_VSELECT 0x07c 0x36c 0x000 0x4 0x0 +#define MX6SL_PAD_ECSPI2_MOSI__GPIO4_IO13 0x07c 0x36c 0x000 0x5 0x0 +#define MX6SL_PAD_ECSPI2_SCLK__ECSPI2_SCLK 0x080 0x370 0x69c 0x0 0x0 +#define MX6SL_PAD_ECSPI2_SCLK__SPDIF_EXT_CLK 0x080 0x370 0x7f4 0x1 0x1 +#define MX6SL_PAD_ECSPI2_SCLK__UART3_RX_DATA 0x080 0x370 0x80c 0x2 0x3 +#define MX6SL_PAD_ECSPI2_SCLK__UART3_TX_DATA 0x080 0x370 0x000 0x2 0x0 +#define MX6SL_PAD_ECSPI2_SCLK__CSI_PIXCLK 0x080 0x370 0x674 0x3 0x0 +#define MX6SL_PAD_ECSPI2_SCLK__SD1_RESET 0x080 0x370 0x000 0x4 0x0 +#define MX6SL_PAD_ECSPI2_SCLK__GPIO4_IO12 0x080 0x370 0x000 0x5 0x0 +#define MX6SL_PAD_ECSPI2_SCLK__USB_OTG2_OC 0x080 0x370 0x820 0x6 0x1 +#define MX6SL_PAD_ECSPI2_SS0__ECSPI2_SS0 0x084 0x374 0x6a8 0x0 0x0 +#define MX6SL_PAD_ECSPI2_SS0__ECSPI1_SS3 0x084 0x374 0x698 0x1 0x0 +#define MX6SL_PAD_ECSPI2_SS0__UART3_CTS_B 0x084 0x374 0x000 0x2 0x0 +#define MX6SL_PAD_ECSPI2_SS0__UART3_RTS_B 0x084 0x374 0x808 0x2 0x1 +#define MX6SL_PAD_ECSPI2_SS0__CSI_VSYNC 0x084 0x374 0x678 0x3 0x0 +#define MX6SL_PAD_ECSPI2_SS0__SD1_CD_B 0x084 0x374 0x828 0x4 0x0 +#define MX6SL_PAD_ECSPI2_SS0__GPIO4_IO15 0x084 0x374 0x000 0x5 0x0 +#define MX6SL_PAD_ECSPI2_SS0__USB_OTG1_PWR 0x084 0x374 0x000 0x6 0x0 +#define MX6SL_PAD_EPDC_BDR0__EPDC_BDR0 0x088 0x378 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_BDR0__SD4_CLK 0x088 0x378 0x850 0x1 0x0 +#define MX6SL_PAD_EPDC_BDR0__UART3_RTS_B 0x088 0x378 0x808 0x2 0x2 +#define MX6SL_PAD_EPDC_BDR0__UART3_CTS_B 0x088 0x378 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_BDR0__EIM_ADDR26 0x088 0x378 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_BDR0__SPDC_RL 0x088 0x378 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_BDR0__GPIO2_IO05 0x088 0x378 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_BDR0__EPDC_SDCE7 0x088 0x378 0x000 0x6 0x0 +#define MX6SL_PAD_EPDC_BDR1__EPDC_BDR1 0x08c 0x37c 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_BDR1__SD4_CMD 0x08c 0x37c 0x858 0x1 0x0 +#define MX6SL_PAD_EPDC_BDR1__UART3_CTS_B 0x08c 0x37c 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_BDR1__UART3_RTS_B 0x08c 0x37c 0x808 0x2 0x3 +#define MX6SL_PAD_EPDC_BDR1__EIM_CRE 0x08c 0x37c 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_BDR1__SPDC_UD 0x08c 0x37c 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_BDR1__GPIO2_IO06 0x08c 0x37c 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_BDR1__EPDC_SDCE8 0x08c 0x37c 0x000 0x6 0x0 +#define MX6SL_PAD_EPDC_D0__EPDC_DATA00 0x090 0x380 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_D0__ECSPI4_MOSI 0x090 0x380 0x6d8 0x1 0x0 +#define MX6SL_PAD_EPDC_D0__LCD_DATA24 0x090 0x380 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_D0__CSI_DATA00 0x090 0x380 0x630 0x3 0x0 +#define MX6SL_PAD_EPDC_D0__SPDC_DATA00 0x090 0x380 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_D0__GPIO1_IO07 0x090 0x380 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_D1__EPDC_DATA01 0x094 0x384 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_D1__ECSPI4_MISO 0x094 0x384 0x6d4 0x1 0x0 +#define MX6SL_PAD_EPDC_D1__LCD_DATA25 0x094 0x384 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_D1__CSI_DATA01 0x094 0x384 0x634 0x3 0x0 +#define MX6SL_PAD_EPDC_D1__SPDC_DATA01 0x094 0x384 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_D1__GPIO1_IO08 0x094 0x384 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_D10__EPDC_DATA10 0x098 0x388 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_D10__ECSPI3_SS0 0x098 0x388 0x6c0 0x1 0x1 +#define MX6SL_PAD_EPDC_D10__EPDC_PWR_CTRL2 0x098 0x388 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_D10__EIM_ADDR18 0x098 0x388 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_D10__SPDC_DATA10 0x098 0x388 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_D10__GPIO1_IO17 0x098 0x388 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_D10__SD4_WP 0x098 0x388 0x87c 0x6 0x0 +#define MX6SL_PAD_EPDC_D11__EPDC_DATA11 0x09c 0x38c 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_D11__ECSPI3_SCLK 0x09c 0x38c 0x6b0 0x1 0x1 +#define MX6SL_PAD_EPDC_D11__EPDC_PWR_CTRL3 0x09c 0x38c 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_D11__EIM_ADDR19 0x09c 0x38c 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_D11__SPDC_DATA11 0x09c 0x38c 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_D11__GPIO1_IO18 0x09c 0x38c 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_D11__SD4_CD_B 0x09c 0x38c 0x854 0x6 0x0 +#define MX6SL_PAD_EPDC_D12__EPDC_DATA12 0x0a0 0x390 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_D12__UART2_RX_DATA 0x0a0 0x390 0x804 0x1 0x0 +#define MX6SL_PAD_EPDC_D12__UART2_TX_DATA 0x0a0 0x390 0x000 0x1 0x0 +#define MX6SL_PAD_EPDC_D12__EPDC_PWR_COM 0x0a0 0x390 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_D12__EIM_ADDR20 0x0a0 0x390 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_D12__SPDC_DATA12 0x0a0 0x390 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_D12__GPIO1_IO19 0x0a0 0x390 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_D12__ECSPI3_SS1 0x0a0 0x390 0x6c4 0x6 0x1 +#define MX6SL_PAD_EPDC_D13__EPDC_DATA13 0x0a4 0x394 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_D13__UART2_TX_DATA 0x0a4 0x394 0x000 0x1 0x0 +#define MX6SL_PAD_EPDC_D13__UART2_RX_DATA 0x0a4 0x394 0x804 0x1 0x1 +#define MX6SL_PAD_EPDC_D13__EPDC_PWR_IRQ 0x0a4 0x394 0x6e8 0x2 0x0 +#define MX6SL_PAD_EPDC_D13__EIM_ADDR21 0x0a4 0x394 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_D13__SPDC_DATA13 0x0a4 0x394 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_D13__GPIO1_IO20 0x0a4 0x394 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_D13__ECSPI3_SS2 0x0a4 0x394 0x6c8 0x6 0x0 +#define MX6SL_PAD_EPDC_D14__EPDC_DATA14 0x0a8 0x398 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_D14__UART2_RTS_B 0x0a8 0x398 0x800 0x1 0x0 +#define MX6SL_PAD_EPDC_D14__UART2_CTS_B 0x0a8 0x398 0x000 0x1 0x0 +#define MX6SL_PAD_EPDC_D14__EPDC_PWR_STAT 0x0a8 0x398 0x6ec 0x2 0x0 +#define MX6SL_PAD_EPDC_D14__EIM_ADDR22 0x0a8 0x398 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_D14__SPDC_DATA14 0x0a8 0x398 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_D14__GPIO1_IO21 0x0a8 0x398 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_D14__ECSPI3_SS3 0x0a8 0x398 0x6cc 0x6 0x0 +#define MX6SL_PAD_EPDC_D15__EPDC_DATA15 0x0ac 0x39c 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_D15__UART2_CTS_B 0x0ac 0x39c 0x000 0x1 0x0 +#define MX6SL_PAD_EPDC_D15__UART2_RTS_B 0x0ac 0x39c 0x800 0x1 0x1 +#define MX6SL_PAD_EPDC_D15__EPDC_PWR_WAKE 0x0ac 0x39c 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_D15__EIM_ADDR23 0x0ac 0x39c 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_D15__SPDC_DATA15 0x0ac 0x39c 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_D15__GPIO1_IO22 0x0ac 0x39c 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_D15__ECSPI3_RDY 0x0ac 0x39c 0x6b4 0x6 0x1 +#define MX6SL_PAD_EPDC_D2__EPDC_DATA02 0x0b0 0x3a0 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_D2__ECSPI4_SS0 0x0b0 0x3a0 0x6dc 0x1 0x0 +#define MX6SL_PAD_EPDC_D2__LCD_DATA26 0x0b0 0x3a0 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_D2__CSI_DATA02 0x0b0 0x3a0 0x638 0x3 0x0 +#define MX6SL_PAD_EPDC_D2__SPDC_DATA02 0x0b0 0x3a0 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_D2__GPIO1_IO09 0x0b0 0x3a0 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_D3__EPDC_DATA03 0x0b4 0x3a4 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_D3__ECSPI4_SCLK 0x0b4 0x3a4 0x6d0 0x1 0x0 +#define MX6SL_PAD_EPDC_D3__LCD_DATA27 0x0b4 0x3a4 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_D3__CSI_DATA03 0x0b4 0x3a4 0x63c 0x3 0x0 +#define MX6SL_PAD_EPDC_D3__SPDC_DATA03 0x0b4 0x3a4 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_D3__GPIO1_IO10 0x0b4 0x3a4 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_D4__EPDC_DATA04 0x0b8 0x3a8 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_D4__ECSPI4_SS1 0x0b8 0x3a8 0x6e0 0x1 0x0 +#define MX6SL_PAD_EPDC_D4__LCD_DATA28 0x0b8 0x3a8 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_D4__CSI_DATA04 0x0b8 0x3a8 0x640 0x3 0x0 +#define MX6SL_PAD_EPDC_D4__SPDC_DATA04 0x0b8 0x3a8 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_D4__GPIO1_IO11 0x0b8 0x3a8 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_D5__EPDC_DATA05 0x0bc 0x3ac 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_D5__ECSPI4_SS2 0x0bc 0x3ac 0x6e4 0x1 0x0 +#define MX6SL_PAD_EPDC_D5__LCD_DATA29 0x0bc 0x3ac 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_D5__CSI_DATA05 0x0bc 0x3ac 0x644 0x3 0x0 +#define MX6SL_PAD_EPDC_D5__SPDC_DATA05 0x0bc 0x3ac 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_D5__GPIO1_IO12 0x0bc 0x3ac 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_D6__EPDC_DATA06 0x0c0 0x3b0 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_D6__ECSPI4_SS3 0x0c0 0x3b0 0x000 0x1 0x0 +#define MX6SL_PAD_EPDC_D6__LCD_DATA30 0x0c0 0x3b0 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_D6__CSI_DATA06 0x0c0 0x3b0 0x648 0x3 0x0 +#define MX6SL_PAD_EPDC_D6__SPDC_DATA06 0x0c0 0x3b0 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_D6__GPIO1_IO13 0x0c0 0x3b0 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_D7__EPDC_DATA07 0x0c4 0x3b4 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_D7__ECSPI4_RDY 0x0c4 0x3b4 0x000 0x1 0x0 +#define MX6SL_PAD_EPDC_D7__LCD_DATA31 0x0c4 0x3b4 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_D7__CSI_DATA07 0x0c4 0x3b4 0x64c 0x3 0x0 +#define MX6SL_PAD_EPDC_D7__SPDC_DATA07 0x0c4 0x3b4 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_D7__GPIO1_IO14 0x0c4 0x3b4 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_D8__EPDC_DATA08 0x0c8 0x3b8 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_D8__ECSPI3_MOSI 0x0c8 0x3b8 0x6bc 0x1 0x1 +#define MX6SL_PAD_EPDC_D8__EPDC_PWR_CTRL0 0x0c8 0x3b8 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_D8__EIM_ADDR16 0x0c8 0x3b8 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_D8__SPDC_DATA08 0x0c8 0x3b8 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_D8__GPIO1_IO15 0x0c8 0x3b8 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_D8__SD4_RESET 0x0c8 0x3b8 0x000 0x6 0x0 +#define MX6SL_PAD_EPDC_D9__EPDC_DATA09 0x0cc 0x3bc 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_D9__ECSPI3_MISO 0x0cc 0x3bc 0x6b8 0x1 0x1 +#define MX6SL_PAD_EPDC_D9__EPDC_PWR_CTRL1 0x0cc 0x3bc 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_D9__EIM_ADDR17 0x0cc 0x3bc 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_D9__SPDC_DATA09 0x0cc 0x3bc 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_D9__GPIO1_IO16 0x0cc 0x3bc 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_D9__SD4_VSELECT 0x0cc 0x3bc 0x000 0x6 0x0 +#define MX6SL_PAD_EPDC_GDCLK__EPDC_GDCLK 0x0d0 0x3c0 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_GDCLK__ECSPI2_SS2 0x0d0 0x3c0 0x000 0x1 0x0 +#define MX6SL_PAD_EPDC_GDCLK__SPDC_YCKR 0x0d0 0x3c0 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_GDCLK__CSI_PIXCLK 0x0d0 0x3c0 0x674 0x3 0x1 +#define MX6SL_PAD_EPDC_GDCLK__SPDC_YCKL 0x0d0 0x3c0 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_GDCLK__GPIO1_IO31 0x0d0 0x3c0 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_GDCLK__SD2_RESET 0x0d0 0x3c0 0x000 0x6 0x0 +#define MX6SL_PAD_EPDC_GDOE__EPDC_GDOE 0x0d4 0x3c4 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_GDOE__ECSPI2_SS3 0x0d4 0x3c4 0x000 0x1 0x0 +#define MX6SL_PAD_EPDC_GDOE__SPDC_YOER 0x0d4 0x3c4 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_GDOE__CSI_HSYNC 0x0d4 0x3c4 0x670 0x3 0x1 +#define MX6SL_PAD_EPDC_GDOE__SPDC_YOEL 0x0d4 0x3c4 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_GDOE__GPIO2_IO00 0x0d4 0x3c4 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_GDOE__SD2_VSELECT 0x0d4 0x3c4 0x000 0x6 0x0 +#define MX6SL_PAD_EPDC_GDRL__EPDC_GDRL 0x0d8 0x3c8 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_GDRL__ECSPI2_RDY 0x0d8 0x3c8 0x000 0x1 0x0 +#define MX6SL_PAD_EPDC_GDRL__SPDC_YDIOUR 0x0d8 0x3c8 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_GDRL__CSI_MCLK 0x0d8 0x3c8 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_GDRL__SPDC_YDIOUL 0x0d8 0x3c8 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_GDRL__GPIO2_IO01 0x0d8 0x3c8 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_GDRL__SD2_WP 0x0d8 0x3c8 0x834 0x6 0x1 +#define MX6SL_PAD_EPDC_GDSP__EPDC_GDSP 0x0dc 0x3cc 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_GDSP__PWM4_OUT 0x0dc 0x3cc 0x000 0x1 0x0 +#define MX6SL_PAD_EPDC_GDSP__SPDC_YDIODR 0x0dc 0x3cc 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_GDSP__CSI_VSYNC 0x0dc 0x3cc 0x678 0x3 0x1 +#define MX6SL_PAD_EPDC_GDSP__SPDC_YDIODL 0x0dc 0x3cc 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_GDSP__GPIO2_IO02 0x0dc 0x3cc 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_GDSP__SD2_CD_B 0x0dc 0x3cc 0x830 0x6 0x1 +#define MX6SL_PAD_EPDC_PWRCOM__EPDC_PWR_COM 0x0e0 0x3d0 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_PWRCOM__SD4_DATA0 0x0e0 0x3d0 0x85c 0x1 0x0 +#define MX6SL_PAD_EPDC_PWRCOM__LCD_DATA20 0x0e0 0x3d0 0x7c8 0x2 0x0 +#define MX6SL_PAD_EPDC_PWRCOM__EIM_BCLK 0x0e0 0x3d0 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x0e0 0x3d0 0x5dc 0x4 0x0 +#define MX6SL_PAD_EPDC_PWRCOM__GPIO2_IO11 0x0e0 0x3d0 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_PWRCOM__SD3_RESET 0x0e0 0x3d0 0x000 0x6 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL0__EPDC_PWR_CTRL0 0x0e4 0x3d4 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL0__AUD5_RXC 0x0e4 0x3d4 0x604 0x1 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL0__LCD_DATA16 0x0e4 0x3d4 0x7b8 0x2 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL0__EIM_RW 0x0e4 0x3d4 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL0__SPDC_YCKL 0x0e4 0x3d4 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL0__GPIO2_IO07 0x0e4 0x3d4 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL0__SD4_RESET 0x0e4 0x3d4 0x000 0x6 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL1__EPDC_PWR_CTRL1 0x0e8 0x3d8 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL1__AUD5_TXFS 0x0e8 0x3d8 0x610 0x1 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL1__LCD_DATA17 0x0e8 0x3d8 0x7bc 0x2 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL1__EIM_OE_B 0x0e8 0x3d8 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL1__SPDC_YOEL 0x0e8 0x3d8 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL1__GPIO2_IO08 0x0e8 0x3d8 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL1__SD4_VSELECT 0x0e8 0x3d8 0x000 0x6 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL2__EPDC_PWR_CTRL2 0x0ec 0x3dc 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL2__AUD5_TXD 0x0ec 0x3dc 0x600 0x1 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL2__LCD_DATA18 0x0ec 0x3dc 0x7c0 0x2 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL2__EIM_CS0_B 0x0ec 0x3dc 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL2__SPDC_YDIOUL 0x0ec 0x3dc 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL2__GPIO2_IO09 0x0ec 0x3dc 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL2__SD4_WP 0x0ec 0x3dc 0x87c 0x6 0x1 +#define MX6SL_PAD_EPDC_PWRCTRL3__EPDC_PWR_CTRL3 0x0f0 0x3e0 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL3__AUD5_TXC 0x0f0 0x3e0 0x60c 0x1 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL3__LCD_DATA19 0x0f0 0x3e0 0x7c4 0x2 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL3__EIM_CS1_B 0x0f0 0x3e0 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL3__SPDC_YDIODL 0x0f0 0x3e0 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL3__GPIO2_IO10 0x0f0 0x3e0 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_PWRCTRL3__SD4_CD_B 0x0f0 0x3e0 0x854 0x6 0x1 +#define MX6SL_PAD_EPDC_PWRINT__EPDC_PWR_IRQ 0x0f4 0x3e4 0x6e8 0x0 0x1 +#define MX6SL_PAD_EPDC_PWRINT__SD4_DATA1 0x0f4 0x3e4 0x860 0x1 0x0 +#define MX6SL_PAD_EPDC_PWRINT__LCD_DATA21 0x0f4 0x3e4 0x7cc 0x2 0x0 +#define MX6SL_PAD_EPDC_PWRINT__EIM_ACLK_FREERUN 0x0f4 0x3e4 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_PWRINT__USB_OTG2_ID 0x0f4 0x3e4 0x5e0 0x4 0x0 +#define MX6SL_PAD_EPDC_PWRINT__GPIO2_IO12 0x0f4 0x3e4 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_PWRINT__SD3_VSELECT 0x0f4 0x3e4 0x000 0x6 0x0 +#define MX6SL_PAD_EPDC_PWRSTAT__EPDC_PWR_STAT 0x0f8 0x3e8 0x6ec 0x0 0x1 +#define MX6SL_PAD_EPDC_PWRSTAT__SD4_DATA2 0x0f8 0x3e8 0x864 0x1 0x0 +#define MX6SL_PAD_EPDC_PWRSTAT__LCD_DATA22 0x0f8 0x3e8 0x7d0 0x2 0x0 +#define MX6SL_PAD_EPDC_PWRSTAT__EIM_WAIT_B 0x0f8 0x3e8 0x884 0x3 0x0 +#define MX6SL_PAD_EPDC_PWRSTAT__ARM_EVENTI 0x0f8 0x3e8 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_PWRSTAT__GPIO2_IO13 0x0f8 0x3e8 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_PWRSTAT__SD3_WP 0x0f8 0x3e8 0x84c 0x6 0x0 +#define MX6SL_PAD_EPDC_PWRWAKEUP__EPDC_PWR_WAKE 0x0fc 0x3ec 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_PWRWAKEUP__SD4_DATA3 0x0fc 0x3ec 0x868 0x1 0x0 +#define MX6SL_PAD_EPDC_PWRWAKEUP__LCD_DATA23 0x0fc 0x3ec 0x7d4 0x2 0x0 +#define MX6SL_PAD_EPDC_PWRWAKEUP__EIM_DTACK_B 0x0fc 0x3ec 0x880 0x3 0x0 +#define MX6SL_PAD_EPDC_PWRWAKEUP__ARM_EVENTO 0x0fc 0x3ec 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_PWRWAKEUP__GPIO2_IO14 0x0fc 0x3ec 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_PWRWAKEUP__SD3_CD_B 0x0fc 0x3ec 0x838 0x6 0x0 +#define MX6SL_PAD_EPDC_SDCE0__EPDC_SDCE0 0x100 0x3f0 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_SDCE0__ECSPI2_SS1 0x100 0x3f0 0x6ac 0x1 0x0 +#define MX6SL_PAD_EPDC_SDCE0__PWM3_OUT 0x100 0x3f0 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_SDCE0__EIM_CS2_B 0x100 0x3f0 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_SDCE0__SPDC_YCKR 0x100 0x3f0 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_SDCE0__GPIO1_IO27 0x100 0x3f0 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_SDCE1__EPDC_SDCE1 0x104 0x3f4 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_SDCE1__WDOG2_B 0x104 0x3f4 0x000 0x1 0x0 +#define MX6SL_PAD_EPDC_SDCE1__PWM4_OUT 0x104 0x3f4 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_SDCE1__EIM_LBA_B 0x104 0x3f4 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_SDCE1__SPDC_YOER 0x104 0x3f4 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_SDCE1__GPIO1_IO28 0x104 0x3f4 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_SDCE2__EPDC_SDCE2 0x108 0x3f8 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_SDCE2__I2C3_SCL 0x108 0x3f8 0x72c 0x1 0x1 +#define MX6SL_PAD_EPDC_SDCE2__PWM1_OUT 0x108 0x3f8 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_SDCE2__EIM_EB0_B 0x108 0x3f8 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_SDCE2__SPDC_YDIOUR 0x108 0x3f8 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_SDCE2__GPIO1_IO29 0x108 0x3f8 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_SDCE3__EPDC_SDCE3 0x10c 0x3fc 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_SDCE3__I2C3_SDA 0x10c 0x3fc 0x730 0x1 0x1 +#define MX6SL_PAD_EPDC_SDCE3__PWM2_OUT 0x10c 0x3fc 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_SDCE3__EIM_EB1_B 0x10c 0x3fc 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_SDCE3__SPDC_YDIODR 0x10c 0x3fc 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_SDCE3__GPIO1_IO30 0x10c 0x3fc 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_SDCLK__EPDC_SDCLK_P 0x110 0x400 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_SDCLK__ECSPI2_MOSI 0x110 0x400 0x6a4 0x1 0x1 +#define MX6SL_PAD_EPDC_SDCLK__I2C2_SCL 0x110 0x400 0x724 0x2 0x0 +#define MX6SL_PAD_EPDC_SDCLK__CSI_DATA08 0x110 0x400 0x650 0x3 0x0 +#define MX6SL_PAD_EPDC_SDCLK__SPDC_CL 0x110 0x400 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_SDCLK__GPIO1_IO23 0x110 0x400 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_SDLE__EPDC_SDLE 0x114 0x404 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_SDLE__ECSPI2_MISO 0x114 0x404 0x6a0 0x1 0x1 +#define MX6SL_PAD_EPDC_SDLE__I2C2_SDA 0x114 0x404 0x728 0x2 0x0 +#define MX6SL_PAD_EPDC_SDLE__CSI_DATA09 0x114 0x404 0x654 0x3 0x0 +#define MX6SL_PAD_EPDC_SDLE__SPDC_LD 0x114 0x404 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_SDLE__GPIO1_IO24 0x114 0x404 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_SDOE__EPDC_SDOE 0x118 0x408 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_SDOE__ECSPI2_SS0 0x118 0x408 0x6a8 0x1 0x1 +#define MX6SL_PAD_EPDC_SDOE__SPDC_XDIOR 0x118 0x408 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_SDOE__CSI_DATA10 0x118 0x408 0x658 0x3 0x0 +#define MX6SL_PAD_EPDC_SDOE__SPDC_XDIOL 0x118 0x408 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_SDOE__GPIO1_IO25 0x118 0x408 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_SDSHR__EPDC_SDSHR 0x11c 0x40c 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_SDSHR__ECSPI2_SCLK 0x11c 0x40c 0x69c 0x1 0x1 +#define MX6SL_PAD_EPDC_SDSHR__EPDC_SDCE4 0x11c 0x40c 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_SDSHR__CSI_DATA11 0x11c 0x40c 0x65c 0x3 0x0 +#define MX6SL_PAD_EPDC_SDSHR__SPDC_XDIOR 0x11c 0x40c 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_SDSHR__GPIO1_IO26 0x11c 0x40c 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_VCOM0__EPDC_VCOM0 0x120 0x410 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_VCOM0__AUD5_RXFS 0x120 0x410 0x608 0x1 0x0 +#define MX6SL_PAD_EPDC_VCOM0__UART3_RX_DATA 0x120 0x410 0x80c 0x2 0x4 +#define MX6SL_PAD_EPDC_VCOM0__UART3_TX_DATA 0x120 0x410 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_VCOM0__EIM_ADDR24 0x120 0x410 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_VCOM0__SPDC_VCOM0 0x120 0x410 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_VCOM0__GPIO2_IO03 0x120 0x410 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_VCOM0__EPDC_SDCE5 0x120 0x410 0x000 0x6 0x0 +#define MX6SL_PAD_EPDC_VCOM1__EPDC_VCOM1 0x124 0x414 0x000 0x0 0x0 +#define MX6SL_PAD_EPDC_VCOM1__AUD5_RXD 0x124 0x414 0x5fc 0x1 0x0 +#define MX6SL_PAD_EPDC_VCOM1__UART3_TX_DATA 0x124 0x414 0x000 0x2 0x0 +#define MX6SL_PAD_EPDC_VCOM1__UART3_RX_DATA 0x124 0x414 0x80c 0x2 0x5 +#define MX6SL_PAD_EPDC_VCOM1__EIM_ADDR25 0x124 0x414 0x000 0x3 0x0 +#define MX6SL_PAD_EPDC_VCOM1__SPDC_VCOM1 0x124 0x414 0x000 0x4 0x0 +#define MX6SL_PAD_EPDC_VCOM1__GPIO2_IO04 0x124 0x414 0x000 0x5 0x0 +#define MX6SL_PAD_EPDC_VCOM1__EPDC_SDCE6 0x124 0x414 0x000 0x6 0x0 +#define MX6SL_PAD_FEC_CRS_DV__FEC_RX_DV 0x128 0x418 0x704 0x0 0x1 +#define MX6SL_PAD_FEC_CRS_DV__SD4_DATA1 0x128 0x418 0x860 0x1 0x1 +#define MX6SL_PAD_FEC_CRS_DV__AUD6_TXC 0x128 0x418 0x624 0x2 0x0 +#define MX6SL_PAD_FEC_CRS_DV__ECSPI4_MISO 0x128 0x418 0x6d4 0x3 0x1 +#define MX6SL_PAD_FEC_CRS_DV__GPT_COMPARE2 0x128 0x418 0x000 0x4 0x0 +#define MX6SL_PAD_FEC_CRS_DV__GPIO4_IO25 0x128 0x418 0x000 0x5 0x0 +#define MX6SL_PAD_FEC_CRS_DV__ARM_TRACE31 0x128 0x418 0x000 0x6 0x0 +#define MX6SL_PAD_FEC_MDC__FEC_MDC 0x12c 0x41c 0x000 0x0 0x0 +#define MX6SL_PAD_FEC_MDC__SD4_DATA4 0x12c 0x41c 0x86c 0x1 0x0 +#define MX6SL_PAD_FEC_MDC__AUDIO_CLK_OUT 0x12c 0x41c 0x000 0x2 0x0 +#define MX6SL_PAD_FEC_MDC__SD1_RESET 0x12c 0x41c 0x000 0x3 0x0 +#define MX6SL_PAD_FEC_MDC__SD3_RESET 0x12c 0x41c 0x000 0x4 0x0 +#define MX6SL_PAD_FEC_MDC__GPIO4_IO23 0x12c 0x41c 0x000 0x5 0x0 +#define MX6SL_PAD_FEC_MDC__ARM_TRACE29 0x12c 0x41c 0x000 0x6 0x0 +#define MX6SL_PAD_FEC_MDIO__FEC_MDIO 0x130 0x420 0x6f4 0x0 0x1 +#define MX6SL_PAD_FEC_MDIO__SD4_CLK 0x130 0x420 0x850 0x1 0x1 +#define MX6SL_PAD_FEC_MDIO__AUD6_RXFS 0x130 0x420 0x620 0x2 0x0 +#define MX6SL_PAD_FEC_MDIO__ECSPI4_SS0 0x130 0x420 0x6dc 0x3 0x1 +#define MX6SL_PAD_FEC_MDIO__GPT_CAPTURE1 0x130 0x420 0x710 0x4 0x0 +#define MX6SL_PAD_FEC_MDIO__GPIO4_IO20 0x130 0x420 0x000 0x5 0x0 +#define MX6SL_PAD_FEC_MDIO__ARM_TRACE26 0x130 0x420 0x000 0x6 0x0 +#define MX6SL_PAD_FEC_REF_CLK__FEC_REF_OUT 0x134 0x424 0x000 0x0 0x0 +#define MX6SL_PAD_FEC_REF_CLK__SD4_RESET 0x134 0x424 0x000 0x1 0x0 +#define MX6SL_PAD_FEC_REF_CLK__WDOG1_B 0x134 0x424 0x000 0x2 0x0 +#define MX6SL_PAD_FEC_REF_CLK__PWM4_OUT 0x134 0x424 0x000 0x3 0x0 +#define MX6SL_PAD_FEC_REF_CLK__CCM_PMIC_READY 0x134 0x424 0x62c 0x4 0x0 +#define MX6SL_PAD_FEC_REF_CLK__GPIO4_IO26 0x134 0x424 0x000 0x5 0x0 +#define MX6SL_PAD_FEC_REF_CLK__SPDIF_EXT_CLK 0x134 0x424 0x7f4 0x6 0x2 +#define MX6SL_PAD_FEC_RX_ER__FEC_RX_ER 0x138 0x428 0x708 0x0 0x1 +#define MX6SL_PAD_FEC_RX_ER__SD4_DATA0 0x138 0x428 0x85c 0x1 0x1 +#define MX6SL_PAD_FEC_RX_ER__AUD6_RXD 0x138 0x428 0x614 0x2 0x0 +#define MX6SL_PAD_FEC_RX_ER__ECSPI4_MOSI 0x138 0x428 0x6d8 0x3 0x1 +#define MX6SL_PAD_FEC_RX_ER__GPT_COMPARE1 0x138 0x428 0x000 0x4 0x0 +#define MX6SL_PAD_FEC_RX_ER__GPIO4_IO19 0x138 0x428 0x000 0x5 0x0 +#define MX6SL_PAD_FEC_RX_ER__ARM_TRACE25 0x138 0x428 0x000 0x6 0x0 +#define MX6SL_PAD_FEC_RXD0__FEC_RX_DATA0 0x13c 0x42c 0x6f8 0x0 0x0 +#define MX6SL_PAD_FEC_RXD0__SD4_DATA5 0x13c 0x42c 0x870 0x1 0x0 +#define MX6SL_PAD_FEC_RXD0__USB_OTG1_ID 0x13c 0x42c 0x5dc 0x2 0x1 +#define MX6SL_PAD_FEC_RXD0__SD1_VSELECT 0x13c 0x42c 0x000 0x3 0x0 +#define MX6SL_PAD_FEC_RXD0__SD3_VSELECT 0x13c 0x42c 0x000 0x4 0x0 +#define MX6SL_PAD_FEC_RXD0__GPIO4_IO17 0x13c 0x42c 0x000 0x5 0x0 +#define MX6SL_PAD_FEC_RXD0__ARM_TRACE24 0x13c 0x42c 0x000 0x6 0x0 +#define MX6SL_PAD_FEC_RXD1__FEC_RX_DATA1 0x140 0x430 0x6fc 0x0 0x1 +#define MX6SL_PAD_FEC_RXD1__SD4_DATA2 0x140 0x430 0x864 0x1 0x1 +#define MX6SL_PAD_FEC_RXD1__AUD6_TXFS 0x140 0x430 0x628 0x2 0x0 +#define MX6SL_PAD_FEC_RXD1__ECSPI4_SS1 0x140 0x430 0x6e0 0x3 0x1 +#define MX6SL_PAD_FEC_RXD1__GPT_COMPARE3 0x140 0x430 0x000 0x4 0x0 +#define MX6SL_PAD_FEC_RXD1__GPIO4_IO18 0x140 0x430 0x000 0x5 0x0 +#define MX6SL_PAD_FEC_RXD1__FEC_COL 0x140 0x430 0x6f0 0x6 0x0 +#define MX6SL_PAD_FEC_TX_CLK__FEC_TX_CLK 0x144 0x434 0x70c 0x0 0x1 +#define MX6SL_PAD_FEC_TX_CLK__SD4_CMD 0x144 0x434 0x858 0x1 0x1 +#define MX6SL_PAD_FEC_TX_CLK__AUD6_RXC 0x144 0x434 0x61c 0x2 0x0 +#define MX6SL_PAD_FEC_TX_CLK__ECSPI4_SCLK 0x144 0x434 0x6d0 0x3 0x1 +#define MX6SL_PAD_FEC_TX_CLK__GPT_CAPTURE2 0x144 0x434 0x714 0x4 0x0 +#define MX6SL_PAD_FEC_TX_CLK__GPIO4_IO21 0x144 0x434 0x000 0x5 0x0 +#define MX6SL_PAD_FEC_TX_CLK__ARM_TRACE27 0x144 0x434 0x000 0x6 0x0 +#define MX6SL_PAD_FEC_TX_EN__FEC_TX_EN 0x148 0x438 0x000 0x0 0x0 +#define MX6SL_PAD_FEC_TX_EN__SD4_DATA6 0x148 0x438 0x874 0x1 0x0 +#define MX6SL_PAD_FEC_TX_EN__SPDIF_IN 0x148 0x438 0x7f0 0x2 0x0 +#define MX6SL_PAD_FEC_TX_EN__SD1_WP 0x148 0x438 0x82c 0x3 0x1 +#define MX6SL_PAD_FEC_TX_EN__SD3_WP 0x148 0x438 0x84c 0x4 0x1 +#define MX6SL_PAD_FEC_TX_EN__GPIO4_IO22 0x148 0x438 0x000 0x5 0x0 +#define MX6SL_PAD_FEC_TX_EN__ARM_TRACE28 0x148 0x438 0x000 0x6 0x0 +#define MX6SL_PAD_FEC_TXD0__FEC_TX_DATA0 0x14c 0x43c 0x000 0x0 0x0 +#define MX6SL_PAD_FEC_TXD0__SD4_DATA3 0x14c 0x43c 0x868 0x1 0x1 +#define MX6SL_PAD_FEC_TXD0__AUD6_TXD 0x14c 0x43c 0x618 0x2 0x0 +#define MX6SL_PAD_FEC_TXD0__ECSPI4_SS2 0x14c 0x43c 0x6e4 0x3 0x1 +#define MX6SL_PAD_FEC_TXD0__GPT_CLKIN 0x14c 0x43c 0x718 0x4 0x0 +#define MX6SL_PAD_FEC_TXD0__GPIO4_IO24 0x14c 0x43c 0x000 0x5 0x0 +#define MX6SL_PAD_FEC_TXD0__ARM_TRACE30 0x14c 0x43c 0x000 0x6 0x0 +#define MX6SL_PAD_FEC_TXD1__FEC_TX_DATA1 0x150 0x440 0x000 0x0 0x0 +#define MX6SL_PAD_FEC_TXD1__SD4_DATA7 0x150 0x440 0x878 0x1 0x0 +#define MX6SL_PAD_FEC_TXD1__SPDIF_OUT 0x150 0x440 0x000 0x2 0x0 +#define MX6SL_PAD_FEC_TXD1__SD1_CD_B 0x150 0x440 0x828 0x3 0x1 +#define MX6SL_PAD_FEC_TXD1__SD3_CD_B 0x150 0x440 0x838 0x4 0x1 +#define MX6SL_PAD_FEC_TXD1__GPIO4_IO16 0x150 0x440 0x000 0x5 0x0 +#define MX6SL_PAD_FEC_TXD1__FEC_RX_CLK 0x150 0x440 0x700 0x6 0x0 +#define MX6SL_PAD_HSIC_DAT__USB_H_DATA 0x154 0x444 0x000 0x0 0x0 +#define MX6SL_PAD_HSIC_DAT__I2C1_SCL 0x154 0x444 0x71c 0x1 0x1 +#define MX6SL_PAD_HSIC_DAT__PWM1_OUT 0x154 0x444 0x000 0x2 0x0 +#define MX6SL_PAD_HSIC_DAT__XTALOSC_REF_CLK_24M 0x154 0x444 0x000 0x3 0x0 +#define MX6SL_PAD_HSIC_DAT__GPIO3_IO19 0x154 0x444 0x000 0x5 0x0 +#define MX6SL_PAD_HSIC_STROBE__USB_H_STROBE 0x158 0x448 0x000 0x0 0x0 +#define MX6SL_PAD_HSIC_STROBE__I2C1_SDA 0x158 0x448 0x720 0x1 0x1 +#define MX6SL_PAD_HSIC_STROBE__PWM2_OUT 0x158 0x448 0x000 0x2 0x0 +#define MX6SL_PAD_HSIC_STROBE__XTALOSC_REF_CLK_32K 0x158 0x448 0x000 0x3 0x0 +#define MX6SL_PAD_HSIC_STROBE__GPIO3_IO20 0x158 0x448 0x000 0x5 0x0 +#define MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x15c 0x44c 0x71c 0x0 0x2 +#define MX6SL_PAD_I2C1_SCL__UART1_RTS_B 0x15c 0x44c 0x7f8 0x1 0x0 +#define MX6SL_PAD_I2C1_SCL__UART1_CTS_B 0x15c 0x44c 0x000 0x1 0x0 +#define MX6SL_PAD_I2C1_SCL__ECSPI3_SS2 0x15c 0x44c 0x6c8 0x2 0x1 +#define MX6SL_PAD_I2C1_SCL__FEC_RX_DATA0 0x15c 0x44c 0x6f8 0x3 0x1 +#define MX6SL_PAD_I2C1_SCL__SD3_RESET 0x15c 0x44c 0x000 0x4 0x0 +#define MX6SL_PAD_I2C1_SCL__GPIO3_IO12 0x15c 0x44c 0x000 0x5 0x0 +#define MX6SL_PAD_I2C1_SCL__ECSPI1_SS1 0x15c 0x44c 0x690 0x6 0x0 +#define MX6SL_PAD_I2C1_SDA__I2C1_SDA 0x160 0x450 0x720 0x0 0x2 +#define MX6SL_PAD_I2C1_SDA__UART1_CTS_B 0x160 0x450 0x000 0x1 0x0 +#define MX6SL_PAD_I2C1_SDA__UART1_RTS_B 0x160 0x450 0x7f8 0x1 0x1 +#define MX6SL_PAD_I2C1_SDA__ECSPI3_SS3 0x160 0x450 0x6cc 0x2 0x1 +#define MX6SL_PAD_I2C1_SDA__FEC_TX_EN 0x160 0x450 0x000 0x3 0x0 +#define MX6SL_PAD_I2C1_SDA__SD3_VSELECT 0x160 0x450 0x000 0x4 0x0 +#define MX6SL_PAD_I2C1_SDA__GPIO3_IO13 0x160 0x450 0x000 0x5 0x0 +#define MX6SL_PAD_I2C1_SDA__ECSPI1_SS2 0x160 0x450 0x694 0x6 0x0 +#define MX6SL_PAD_I2C2_SCL__I2C2_SCL 0x164 0x454 0x724 0x0 0x1 +#define MX6SL_PAD_I2C2_SCL__AUD4_RXFS 0x164 0x454 0x5f0 0x1 0x0 +#define MX6SL_PAD_I2C2_SCL__SPDIF_IN 0x164 0x454 0x7f0 0x2 0x1 +#define MX6SL_PAD_I2C2_SCL__FEC_TX_DATA1 0x164 0x454 0x000 0x3 0x0 +#define MX6SL_PAD_I2C2_SCL__SD3_WP 0x164 0x454 0x84c 0x4 0x2 +#define MX6SL_PAD_I2C2_SCL__GPIO3_IO14 0x164 0x454 0x000 0x5 0x0 +#define MX6SL_PAD_I2C2_SCL__ECSPI1_RDY 0x164 0x454 0x680 0x6 0x0 +#define MX6SL_PAD_I2C2_SDA__I2C2_SDA 0x168 0x458 0x728 0x0 0x1 +#define MX6SL_PAD_I2C2_SDA__AUD4_RXC 0x168 0x458 0x5ec 0x1 0x0 +#define MX6SL_PAD_I2C2_SDA__SPDIF_OUT 0x168 0x458 0x000 0x2 0x0 +#define MX6SL_PAD_I2C2_SDA__FEC_REF_OUT 0x168 0x458 0x000 0x3 0x0 +#define MX6SL_PAD_I2C2_SDA__SD3_CD_B 0x168 0x458 0x838 0x4 0x2 +#define MX6SL_PAD_I2C2_SDA__GPIO3_IO15 0x168 0x458 0x000 0x5 0x0 +#define MX6SL_PAD_KEY_COL0__KEY_COL0 0x16c 0x474 0x734 0x0 0x0 +#define MX6SL_PAD_KEY_COL0__I2C2_SCL 0x16c 0x474 0x724 0x1 0x2 +#define MX6SL_PAD_KEY_COL0__LCD_DATA00 0x16c 0x474 0x778 0x2 0x0 +#define MX6SL_PAD_KEY_COL0__EIM_AD00 0x16c 0x474 0x000 0x3 0x0 +#define MX6SL_PAD_KEY_COL0__SD1_CD_B 0x16c 0x474 0x828 0x4 0x2 +#define MX6SL_PAD_KEY_COL0__GPIO3_IO24 0x16c 0x474 0x000 0x5 0x0 +#define MX6SL_PAD_KEY_COL1__KEY_COL1 0x170 0x478 0x738 0x0 0x0 +#define MX6SL_PAD_KEY_COL1__ECSPI4_MOSI 0x170 0x478 0x6d8 0x1 0x2 +#define MX6SL_PAD_KEY_COL1__LCD_DATA02 0x170 0x478 0x780 0x2 0x0 +#define MX6SL_PAD_KEY_COL1__EIM_AD02 0x170 0x478 0x000 0x3 0x0 +#define MX6SL_PAD_KEY_COL1__SD3_DATA4 0x170 0x478 0x83c 0x4 0x0 +#define MX6SL_PAD_KEY_COL1__GPIO3_IO26 0x170 0x478 0x000 0x5 0x0 +#define MX6SL_PAD_KEY_COL2__KEY_COL2 0x174 0x47c 0x73c 0x0 0x0 +#define MX6SL_PAD_KEY_COL2__ECSPI4_SS0 0x174 0x47c 0x6dc 0x1 0x2 +#define MX6SL_PAD_KEY_COL2__LCD_DATA04 0x174 0x47c 0x788 0x2 0x0 +#define MX6SL_PAD_KEY_COL2__EIM_AD04 0x174 0x47c 0x000 0x3 0x0 +#define MX6SL_PAD_KEY_COL2__SD3_DATA6 0x174 0x47c 0x844 0x4 0x0 +#define MX6SL_PAD_KEY_COL2__GPIO3_IO28 0x174 0x47c 0x000 0x5 0x0 +#define MX6SL_PAD_KEY_COL3__KEY_COL3 0x178 0x480 0x740 0x0 0x0 +#define MX6SL_PAD_KEY_COL3__AUD6_RXFS 0x178 0x480 0x620 0x1 0x1 +#define MX6SL_PAD_KEY_COL3__LCD_DATA06 0x178 0x480 0x790 0x2 0x0 +#define MX6SL_PAD_KEY_COL3__EIM_AD06 0x178 0x480 0x000 0x3 0x0 +#define MX6SL_PAD_KEY_COL3__SD4_DATA6 0x178 0x480 0x874 0x4 0x1 +#define MX6SL_PAD_KEY_COL3__GPIO3_IO30 0x178 0x480 0x000 0x5 0x0 +#define MX6SL_PAD_KEY_COL3__SD1_RESET 0x178 0x480 0x000 0x6 0x0 +#define MX6SL_PAD_KEY_COL4__KEY_COL4 0x17c 0x484 0x744 0x0 0x0 +#define MX6SL_PAD_KEY_COL4__AUD6_RXD 0x17c 0x484 0x614 0x1 0x1 +#define MX6SL_PAD_KEY_COL4__LCD_DATA08 0x17c 0x484 0x798 0x2 0x0 +#define MX6SL_PAD_KEY_COL4__EIM_AD08 0x17c 0x484 0x000 0x3 0x0 +#define MX6SL_PAD_KEY_COL4__SD4_CLK 0x17c 0x484 0x850 0x4 0x2 +#define MX6SL_PAD_KEY_COL4__GPIO4_IO00 0x17c 0x484 0x000 0x5 0x0 +#define MX6SL_PAD_KEY_COL4__USB_OTG1_PWR 0x17c 0x484 0x000 0x6 0x0 +#define MX6SL_PAD_KEY_COL5__KEY_COL5 0x180 0x488 0x748 0x0 0x0 +#define MX6SL_PAD_KEY_COL5__AUD6_TXFS 0x180 0x488 0x628 0x1 0x1 +#define MX6SL_PAD_KEY_COL5__LCD_DATA10 0x180 0x488 0x7a0 0x2 0x0 +#define MX6SL_PAD_KEY_COL5__EIM_AD10 0x180 0x488 0x000 0x3 0x0 +#define MX6SL_PAD_KEY_COL5__SD4_DATA0 0x180 0x488 0x85c 0x4 0x2 +#define MX6SL_PAD_KEY_COL5__GPIO4_IO02 0x180 0x488 0x000 0x5 0x0 +#define MX6SL_PAD_KEY_COL5__USB_OTG2_PWR 0x180 0x488 0x000 0x6 0x0 +#define MX6SL_PAD_KEY_COL6__KEY_COL6 0x184 0x48c 0x74c 0x0 0x0 +#define MX6SL_PAD_KEY_COL6__UART4_RX_DATA 0x184 0x48c 0x814 0x1 0x2 +#define MX6SL_PAD_KEY_COL6__UART4_TX_DATA 0x184 0x48c 0x000 0x1 0x0 +#define MX6SL_PAD_KEY_COL6__LCD_DATA12 0x184 0x48c 0x7a8 0x2 0x0 +#define MX6SL_PAD_KEY_COL6__EIM_AD12 0x184 0x48c 0x000 0x3 0x0 +#define MX6SL_PAD_KEY_COL6__SD4_DATA2 0x184 0x48c 0x864 0x4 0x2 +#define MX6SL_PAD_KEY_COL6__GPIO4_IO04 0x184 0x48c 0x000 0x5 0x0 +#define MX6SL_PAD_KEY_COL6__SD3_RESET 0x184 0x48c 0x000 0x6 0x0 +#define MX6SL_PAD_KEY_COL7__KEY_COL7 0x188 0x490 0x750 0x0 0x0 +#define MX6SL_PAD_KEY_COL7__UART4_RTS_B 0x188 0x490 0x810 0x1 0x2 +#define MX6SL_PAD_KEY_COL7__UART4_CTS_B 0x188 0x490 0x000 0x1 0x0 +#define MX6SL_PAD_KEY_COL7__LCD_DATA14 0x188 0x490 0x7b0 0x2 0x0 +#define MX6SL_PAD_KEY_COL7__EIM_AD14 0x188 0x490 0x000 0x3 0x0 +#define MX6SL_PAD_KEY_COL7__SD4_DATA4 0x188 0x490 0x86c 0x4 0x1 +#define MX6SL_PAD_KEY_COL7__GPIO4_IO06 0x188 0x490 0x000 0x5 0x0 +#define MX6SL_PAD_KEY_COL7__SD1_WP 0x188 0x490 0x82c 0x6 0x2 +#define MX6SL_PAD_KEY_ROW0__KEY_ROW0 0x18c 0x494 0x754 0x0 0x0 +#define MX6SL_PAD_KEY_ROW0__I2C2_SDA 0x18c 0x494 0x728 0x1 0x2 +#define MX6SL_PAD_KEY_ROW0__LCD_DATA01 0x18c 0x494 0x77c 0x2 0x0 +#define MX6SL_PAD_KEY_ROW0__EIM_AD01 0x18c 0x494 0x000 0x3 0x0 +#define MX6SL_PAD_KEY_ROW0__SD1_WP 0x18c 0x494 0x82c 0x4 0x3 +#define MX6SL_PAD_KEY_ROW0__GPIO3_IO25 0x18c 0x494 0x000 0x5 0x0 +#define MX6SL_PAD_KEY_ROW1__KEY_ROW1 0x190 0x498 0x758 0x0 0x0 +#define MX6SL_PAD_KEY_ROW1__ECSPI4_MISO 0x190 0x498 0x6d4 0x1 0x2 +#define MX6SL_PAD_KEY_ROW1__LCD_DATA03 0x190 0x498 0x784 0x2 0x0 +#define MX6SL_PAD_KEY_ROW1__EIM_AD03 0x190 0x498 0x000 0x3 0x0 +#define MX6SL_PAD_KEY_ROW1__SD3_DATA5 0x190 0x498 0x840 0x4 0x0 +#define MX6SL_PAD_KEY_ROW1__GPIO3_IO27 0x190 0x498 0x000 0x5 0x0 +#define MX6SL_PAD_KEY_ROW2__KEY_ROW2 0x194 0x49c 0x75c 0x0 0x0 +#define MX6SL_PAD_KEY_ROW2__ECSPI4_SCLK 0x194 0x49c 0x6d0 0x1 0x2 +#define MX6SL_PAD_KEY_ROW2__LCD_DATA05 0x194 0x49c 0x78c 0x2 0x0 +#define MX6SL_PAD_KEY_ROW2__EIM_AD05 0x194 0x49c 0x000 0x3 0x0 +#define MX6SL_PAD_KEY_ROW2__SD3_DATA7 0x194 0x49c 0x848 0x4 0x0 +#define MX6SL_PAD_KEY_ROW2__GPIO3_IO29 0x194 0x49c 0x000 0x5 0x0 +#define MX6SL_PAD_KEY_ROW3__KEY_ROW3 0x198 0x4a0 0x760 0x0 0x0 +#define MX6SL_PAD_KEY_ROW3__AUD6_RXC 0x198 0x4a0 0x61c 0x1 0x1 +#define MX6SL_PAD_KEY_ROW3__LCD_DATA07 0x198 0x4a0 0x794 0x2 0x0 +#define MX6SL_PAD_KEY_ROW3__EIM_AD07 0x198 0x4a0 0x000 0x3 0x0 +#define MX6SL_PAD_KEY_ROW3__SD4_DATA7 0x198 0x4a0 0x878 0x4 0x1 +#define MX6SL_PAD_KEY_ROW3__GPIO3_IO31 0x198 0x4a0 0x000 0x5 0x0 +#define MX6SL_PAD_KEY_ROW3__SD1_VSELECT 0x198 0x4a0 0x000 0x6 0x0 +#define MX6SL_PAD_KEY_ROW4__KEY_ROW4 0x19c 0x4a4 0x764 0x0 0x0 +#define MX6SL_PAD_KEY_ROW4__AUD6_TXC 0x19c 0x4a4 0x624 0x1 0x1 +#define MX6SL_PAD_KEY_ROW4__LCD_DATA09 0x19c 0x4a4 0x79c 0x2 0x0 +#define MX6SL_PAD_KEY_ROW4__EIM_AD09 0x19c 0x4a4 0x000 0x3 0x0 +#define MX6SL_PAD_KEY_ROW4__SD4_CMD 0x19c 0x4a4 0x858 0x4 0x2 +#define MX6SL_PAD_KEY_ROW4__GPIO4_IO01 0x19c 0x4a4 0x000 0x5 0x0 +#define MX6SL_PAD_KEY_ROW4__USB_OTG1_OC 0x19c 0x4a4 0x824 0x6 0x1 +#define MX6SL_PAD_KEY_ROW5__KEY_ROW5 0x1a0 0x4a8 0x768 0x0 0x0 +#define MX6SL_PAD_KEY_ROW5__AUD6_TXD 0x1a0 0x4a8 0x618 0x1 0x1 +#define MX6SL_PAD_KEY_ROW5__LCD_DATA11 0x1a0 0x4a8 0x7a4 0x2 0x0 +#define MX6SL_PAD_KEY_ROW5__EIM_AD11 0x1a0 0x4a8 0x000 0x3 0x0 +#define MX6SL_PAD_KEY_ROW5__SD4_DATA1 0x1a0 0x4a8 0x860 0x4 0x2 +#define MX6SL_PAD_KEY_ROW5__GPIO4_IO03 0x1a0 0x4a8 0x000 0x5 0x0 +#define MX6SL_PAD_KEY_ROW5__USB_OTG2_OC 0x1a0 0x4a8 0x820 0x6 0x2 +#define MX6SL_PAD_KEY_ROW6__KEY_ROW6 0x1a4 0x4ac 0x76c 0x0 0x0 +#define MX6SL_PAD_KEY_ROW6__UART4_TX_DATA 0x1a4 0x4ac 0x000 0x1 0x0 +#define MX6SL_PAD_KEY_ROW6__UART4_RX_DATA 0x1a4 0x4ac 0x814 0x1 0x3 +#define MX6SL_PAD_KEY_ROW6__LCD_DATA13 0x1a4 0x4ac 0x7ac 0x2 0x0 +#define MX6SL_PAD_KEY_ROW6__EIM_AD13 0x1a4 0x4ac 0x000 0x3 0x0 +#define MX6SL_PAD_KEY_ROW6__SD4_DATA3 0x1a4 0x4ac 0x868 0x4 0x2 +#define MX6SL_PAD_KEY_ROW6__GPIO4_IO05 0x1a4 0x4ac 0x000 0x5 0x0 +#define MX6SL_PAD_KEY_ROW6__SD3_VSELECT 0x1a4 0x4ac 0x000 0x6 0x0 +#define MX6SL_PAD_KEY_ROW7__KEY_ROW7 0x1a8 0x4b0 0x770 0x0 0x0 +#define MX6SL_PAD_KEY_ROW7__UART4_CTS_B 0x1a8 0x4b0 0x000 0x1 0x0 +#define MX6SL_PAD_KEY_ROW7__UART4_RTS_B 0x1a8 0x4b0 0x810 0x1 0x3 +#define MX6SL_PAD_KEY_ROW7__LCD_DATA15 0x1a8 0x4b0 0x7b4 0x2 0x0 +#define MX6SL_PAD_KEY_ROW7__EIM_AD15 0x1a8 0x4b0 0x000 0x3 0x0 +#define MX6SL_PAD_KEY_ROW7__SD4_DATA5 0x1a8 0x4b0 0x870 0x4 0x1 +#define MX6SL_PAD_KEY_ROW7__GPIO4_IO07 0x1a8 0x4b0 0x000 0x5 0x0 +#define MX6SL_PAD_KEY_ROW7__SD1_CD_B 0x1a8 0x4b0 0x828 0x6 0x3 +#define MX6SL_PAD_LCD_CLK__LCD_CLK 0x1ac 0x4b4 0x000 0x0 0x0 +#define MX6SL_PAD_LCD_CLK__SD4_DATA4 0x1ac 0x4b4 0x86c 0x1 0x2 +#define MX6SL_PAD_LCD_CLK__LCD_WR_RWN 0x1ac 0x4b4 0x000 0x2 0x0 +#define MX6SL_PAD_LCD_CLK__EIM_RW 0x1ac 0x4b4 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_CLK__PWM4_OUT 0x1ac 0x4b4 0x000 0x4 0x0 +#define MX6SL_PAD_LCD_CLK__GPIO2_IO15 0x1ac 0x4b4 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT0__LCD_DATA00 0x1b0 0x4b8 0x778 0x0 0x1 +#define MX6SL_PAD_LCD_DAT0__ECSPI1_MOSI 0x1b0 0x4b8 0x688 0x1 0x1 +#define MX6SL_PAD_LCD_DAT0__USB_OTG2_ID 0x1b0 0x4b8 0x5e0 0x2 0x1 +#define MX6SL_PAD_LCD_DAT0__PWM1_OUT 0x1b0 0x4b8 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT0__UART5_DTR_B 0x1b0 0x4b8 0x000 0x4 0x0 +#define MX6SL_PAD_LCD_DAT0__GPIO2_IO20 0x1b0 0x4b8 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT0__ARM_TRACE00 0x1b0 0x4b8 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT0__SRC_BOOT_CFG00 0x1b0 0x4b8 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT1__LCD_DATA01 0x1b4 0x4bc 0x77c 0x0 0x1 +#define MX6SL_PAD_LCD_DAT1__ECSPI1_MISO 0x1b4 0x4bc 0x684 0x1 0x1 +#define MX6SL_PAD_LCD_DAT1__USB_OTG1_ID 0x1b4 0x4bc 0x5dc 0x2 0x2 +#define MX6SL_PAD_LCD_DAT1__PWM2_OUT 0x1b4 0x4bc 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT1__AUD4_RXFS 0x1b4 0x4bc 0x5f0 0x4 0x1 +#define MX6SL_PAD_LCD_DAT1__GPIO2_IO21 0x1b4 0x4bc 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT1__ARM_TRACE01 0x1b4 0x4bc 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT1__SRC_BOOT_CFG01 0x1b4 0x4bc 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT10__LCD_DATA10 0x1b8 0x4c0 0x7a0 0x0 0x1 +#define MX6SL_PAD_LCD_DAT10__KEY_COL1 0x1b8 0x4c0 0x738 0x1 0x1 +#define MX6SL_PAD_LCD_DAT10__CSI_DATA07 0x1b8 0x4c0 0x64c 0x2 0x1 +#define MX6SL_PAD_LCD_DAT10__EIM_DATA04 0x1b8 0x4c0 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT10__ECSPI2_MISO 0x1b8 0x4c0 0x6a0 0x4 0x2 +#define MX6SL_PAD_LCD_DAT10__GPIO2_IO30 0x1b8 0x4c0 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT10__ARM_TRACE10 0x1b8 0x4c0 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT10__SRC_BOOT_CFG10 0x1b8 0x4c0 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT11__LCD_DATA11 0x1bc 0x4c4 0x7a4 0x0 0x1 +#define MX6SL_PAD_LCD_DAT11__KEY_ROW1 0x1bc 0x4c4 0x758 0x1 0x1 +#define MX6SL_PAD_LCD_DAT11__CSI_DATA06 0x1bc 0x4c4 0x648 0x2 0x1 +#define MX6SL_PAD_LCD_DAT11__EIM_DATA05 0x1bc 0x4c4 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT11__ECSPI2_SS1 0x1bc 0x4c4 0x6ac 0x4 0x1 +#define MX6SL_PAD_LCD_DAT11__GPIO2_IO31 0x1bc 0x4c4 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT11__ARM_TRACE11 0x1bc 0x4c4 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT11__SRC_BOOT_CFG11 0x1bc 0x4c4 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT12__LCD_DATA12 0x1c0 0x4c8 0x7a8 0x0 0x1 +#define MX6SL_PAD_LCD_DAT12__KEY_COL2 0x1c0 0x4c8 0x73c 0x1 0x1 +#define MX6SL_PAD_LCD_DAT12__CSI_DATA05 0x1c0 0x4c8 0x644 0x2 0x1 +#define MX6SL_PAD_LCD_DAT12__EIM_DATA06 0x1c0 0x4c8 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT12__UART5_RTS_B 0x1c0 0x4c8 0x818 0x4 0x2 +#define MX6SL_PAD_LCD_DAT12__UART5_CTS_B 0x1c0 0x4c8 0x000 0x4 0x0 +#define MX6SL_PAD_LCD_DAT12__GPIO3_IO00 0x1c0 0x4c8 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT12__ARM_TRACE12 0x1c0 0x4c8 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT12__SRC_BOOT_CFG12 0x1c0 0x4c8 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT13__LCD_DATA13 0x1c4 0x4cc 0x7ac 0x0 0x1 +#define MX6SL_PAD_LCD_DAT13__KEY_ROW2 0x1c4 0x4cc 0x75c 0x1 0x1 +#define MX6SL_PAD_LCD_DAT13__CSI_DATA04 0x1c4 0x4cc 0x640 0x2 0x1 +#define MX6SL_PAD_LCD_DAT13__EIM_DATA07 0x1c4 0x4cc 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT13__UART5_CTS_B 0x1c4 0x4cc 0x000 0x4 0x0 +#define MX6SL_PAD_LCD_DAT13__UART5_RTS_B 0x1c4 0x4cc 0x818 0x4 0x3 +#define MX6SL_PAD_LCD_DAT13__GPIO3_IO01 0x1c4 0x4cc 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT13__ARM_TRACE13 0x1c4 0x4cc 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT13__SRC_BOOT_CFG13 0x1c4 0x4cc 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT14__LCD_DATA14 0x1c8 0x4d0 0x7b0 0x0 0x1 +#define MX6SL_PAD_LCD_DAT14__KEY_COL3 0x1c8 0x4d0 0x740 0x1 0x1 +#define MX6SL_PAD_LCD_DAT14__CSI_DATA03 0x1c8 0x4d0 0x63c 0x2 0x1 +#define MX6SL_PAD_LCD_DAT14__EIM_DATA08 0x1c8 0x4d0 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT14__UART5_RX_DATA 0x1c8 0x4d0 0x81c 0x4 0x2 +#define MX6SL_PAD_LCD_DAT14__UART5_TX_DATA 0x1c8 0x4d0 0x000 0x4 0x0 +#define MX6SL_PAD_LCD_DAT14__GPIO3_IO02 0x1c8 0x4d0 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT14__ARM_TRACE14 0x1c8 0x4d0 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT14__SRC_BOOT_CFG14 0x1c8 0x4d0 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT15__LCD_DATA15 0x1cc 0x4d4 0x7b4 0x0 0x1 +#define MX6SL_PAD_LCD_DAT15__KEY_ROW3 0x1cc 0x4d4 0x760 0x1 0x1 +#define MX6SL_PAD_LCD_DAT15__CSI_DATA02 0x1cc 0x4d4 0x638 0x2 0x1 +#define MX6SL_PAD_LCD_DAT15__EIM_DATA09 0x1cc 0x4d4 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT15__UART5_TX_DATA 0x1cc 0x4d4 0x000 0x4 0x0 +#define MX6SL_PAD_LCD_DAT15__UART5_RX_DATA 0x1cc 0x4d4 0x81c 0x4 0x3 +#define MX6SL_PAD_LCD_DAT15__GPIO3_IO03 0x1cc 0x4d4 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT15__ARM_TRACE15 0x1cc 0x4d4 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT15__SRC_BOOT_CFG15 0x1cc 0x4d4 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT16__LCD_DATA16 0x1d0 0x4d8 0x7b8 0x0 0x1 +#define MX6SL_PAD_LCD_DAT16__KEY_COL4 0x1d0 0x4d8 0x744 0x1 0x1 +#define MX6SL_PAD_LCD_DAT16__CSI_DATA01 0x1d0 0x4d8 0x634 0x2 0x1 +#define MX6SL_PAD_LCD_DAT16__EIM_DATA10 0x1d0 0x4d8 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT16__I2C2_SCL 0x1d0 0x4d8 0x724 0x4 0x3 +#define MX6SL_PAD_LCD_DAT16__GPIO3_IO04 0x1d0 0x4d8 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT16__ARM_TRACE16 0x1d0 0x4d8 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT16__SRC_BOOT_CFG24 0x1d0 0x4d8 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT17__LCD_DATA17 0x1d4 0x4dc 0x7bc 0x0 0x1 +#define MX6SL_PAD_LCD_DAT17__KEY_ROW4 0x1d4 0x4dc 0x764 0x1 0x1 +#define MX6SL_PAD_LCD_DAT17__CSI_DATA00 0x1d4 0x4dc 0x630 0x2 0x1 +#define MX6SL_PAD_LCD_DAT17__EIM_DATA11 0x1d4 0x4dc 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT17__I2C2_SDA 0x1d4 0x4dc 0x728 0x4 0x3 +#define MX6SL_PAD_LCD_DAT17__GPIO3_IO05 0x1d4 0x4dc 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT17__ARM_TRACE17 0x1d4 0x4dc 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT17__SRC_BOOT_CFG25 0x1d4 0x4dc 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT18__LCD_DATA18 0x1d8 0x4e0 0x7c0 0x0 0x1 +#define MX6SL_PAD_LCD_DAT18__KEY_COL5 0x1d8 0x4e0 0x748 0x1 0x1 +#define MX6SL_PAD_LCD_DAT18__CSI_DATA15 0x1d8 0x4e0 0x66c 0x2 0x0 +#define MX6SL_PAD_LCD_DAT18__EIM_DATA12 0x1d8 0x4e0 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT18__GPT_CAPTURE1 0x1d8 0x4e0 0x710 0x4 0x1 +#define MX6SL_PAD_LCD_DAT18__GPIO3_IO06 0x1d8 0x4e0 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT18__ARM_TRACE18 0x1d8 0x4e0 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT18__SRC_BOOT_CFG26 0x1d8 0x4e0 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT19__LCD_DATA19 0x1dc 0x4e4 0x7c4 0x0 0x1 +#define MX6SL_PAD_LCD_DAT19__KEY_ROW5 0x1dc 0x4e4 0x768 0x1 0x1 +#define MX6SL_PAD_LCD_DAT19__CSI_DATA14 0x1dc 0x4e4 0x668 0x2 0x0 +#define MX6SL_PAD_LCD_DAT19__EIM_DATA13 0x1dc 0x4e4 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT19__GPT_CAPTURE2 0x1dc 0x4e4 0x714 0x4 0x1 +#define MX6SL_PAD_LCD_DAT19__GPIO3_IO07 0x1dc 0x4e4 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT19__ARM_TRACE19 0x1dc 0x4e4 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT19__SRC_BOOT_CFG27 0x1dc 0x4e4 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT2__LCD_DATA02 0x1e0 0x4e8 0x780 0x0 0x1 +#define MX6SL_PAD_LCD_DAT2__ECSPI1_SS0 0x1e0 0x4e8 0x68c 0x1 0x1 +#define MX6SL_PAD_LCD_DAT2__EPIT2_OUT 0x1e0 0x4e8 0x000 0x2 0x0 +#define MX6SL_PAD_LCD_DAT2__PWM3_OUT 0x1e0 0x4e8 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT2__AUD4_RXC 0x1e0 0x4e8 0x5ec 0x4 0x1 +#define MX6SL_PAD_LCD_DAT2__GPIO2_IO22 0x1e0 0x4e8 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT2__ARM_TRACE02 0x1e0 0x4e8 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT2__SRC_BOOT_CFG02 0x1e0 0x4e8 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT20__LCD_DATA20 0x1e4 0x4ec 0x7c8 0x0 0x1 +#define MX6SL_PAD_LCD_DAT20__KEY_COL6 0x1e4 0x4ec 0x74c 0x1 0x1 +#define MX6SL_PAD_LCD_DAT20__CSI_DATA13 0x1e4 0x4ec 0x664 0x2 0x0 +#define MX6SL_PAD_LCD_DAT20__EIM_DATA14 0x1e4 0x4ec 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT20__GPT_COMPARE1 0x1e4 0x4ec 0x000 0x4 0x0 +#define MX6SL_PAD_LCD_DAT20__GPIO3_IO08 0x1e4 0x4ec 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT20__ARM_TRACE20 0x1e4 0x4ec 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT20__SRC_BOOT_CFG28 0x1e4 0x4ec 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT21__LCD_DATA21 0x1e8 0x4f0 0x7cc 0x0 0x1 +#define MX6SL_PAD_LCD_DAT21__KEY_ROW6 0x1e8 0x4f0 0x76c 0x1 0x1 +#define MX6SL_PAD_LCD_DAT21__CSI_DATA12 0x1e8 0x4f0 0x660 0x2 0x0 +#define MX6SL_PAD_LCD_DAT21__EIM_DATA15 0x1e8 0x4f0 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT21__GPT_COMPARE2 0x1e8 0x4f0 0x000 0x4 0x0 +#define MX6SL_PAD_LCD_DAT21__GPIO3_IO09 0x1e8 0x4f0 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT21__ARM_TRACE21 0x1e8 0x4f0 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT21__SRC_BOOT_CFG29 0x1e8 0x4f0 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT22__LCD_DATA22 0x1ec 0x4f4 0x7d0 0x0 0x1 +#define MX6SL_PAD_LCD_DAT22__KEY_COL7 0x1ec 0x4f4 0x750 0x1 0x1 +#define MX6SL_PAD_LCD_DAT22__CSI_DATA11 0x1ec 0x4f4 0x65c 0x2 0x1 +#define MX6SL_PAD_LCD_DAT22__EIM_EB3_B 0x1ec 0x4f4 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT22__GPT_COMPARE3 0x1ec 0x4f4 0x000 0x4 0x0 +#define MX6SL_PAD_LCD_DAT22__GPIO3_IO10 0x1ec 0x4f4 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT22__ARM_TRACE22 0x1ec 0x4f4 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT22__SRC_BOOT_CFG30 0x1ec 0x4f4 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT23__LCD_DATA23 0x1f0 0x4f8 0x7d4 0x0 0x1 +#define MX6SL_PAD_LCD_DAT23__KEY_ROW7 0x1f0 0x4f8 0x770 0x1 0x1 +#define MX6SL_PAD_LCD_DAT23__CSI_DATA10 0x1f0 0x4f8 0x658 0x2 0x1 +#define MX6SL_PAD_LCD_DAT23__EIM_EB2_B 0x1f0 0x4f8 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT23__GPT_CLKIN 0x1f0 0x4f8 0x718 0x4 0x1 +#define MX6SL_PAD_LCD_DAT23__GPIO3_IO11 0x1f0 0x4f8 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT23__ARM_TRACE23 0x1f0 0x4f8 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT23__SRC_BOOT_CFG31 0x1f0 0x4f8 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT3__LCD_DATA03 0x1f4 0x4fc 0x784 0x0 0x1 +#define MX6SL_PAD_LCD_DAT3__ECSPI1_SCLK 0x1f4 0x4fc 0x67c 0x1 0x1 +#define MX6SL_PAD_LCD_DAT3__UART5_DSR_B 0x1f4 0x4fc 0x000 0x2 0x0 +#define MX6SL_PAD_LCD_DAT3__PWM4_OUT 0x1f4 0x4fc 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT3__AUD4_RXD 0x1f4 0x4fc 0x5e4 0x4 0x1 +#define MX6SL_PAD_LCD_DAT3__GPIO2_IO23 0x1f4 0x4fc 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT3__ARM_TRACE03 0x1f4 0x4fc 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT3__SRC_BOOT_CFG03 0x1f4 0x4fc 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT4__LCD_DATA04 0x1f8 0x500 0x788 0x0 0x1 +#define MX6SL_PAD_LCD_DAT4__ECSPI1_SS1 0x1f8 0x500 0x690 0x1 0x1 +#define MX6SL_PAD_LCD_DAT4__CSI_VSYNC 0x1f8 0x500 0x678 0x2 0x2 +#define MX6SL_PAD_LCD_DAT4__WDOG2_RESET_B_DEB 0x1f8 0x500 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT4__AUD4_TXC 0x1f8 0x500 0x5f4 0x4 0x1 +#define MX6SL_PAD_LCD_DAT4__GPIO2_IO24 0x1f8 0x500 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT4__ARM_TRACE04 0x1f8 0x500 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT4__SRC_BOOT_CFG04 0x1f8 0x500 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT5__LCD_DATA05 0x1fc 0x504 0x78c 0x0 0x1 +#define MX6SL_PAD_LCD_DAT5__ECSPI1_SS2 0x1fc 0x504 0x694 0x1 0x1 +#define MX6SL_PAD_LCD_DAT5__CSI_HSYNC 0x1fc 0x504 0x670 0x2 0x2 +#define MX6SL_PAD_LCD_DAT5__EIM_CS3_B 0x1fc 0x504 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT5__AUD4_TXFS 0x1fc 0x504 0x5f8 0x4 0x1 +#define MX6SL_PAD_LCD_DAT5__GPIO2_IO25 0x1fc 0x504 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT5__ARM_TRACE05 0x1fc 0x504 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT5__SRC_BOOT_CFG05 0x1fc 0x504 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT6__LCD_DATA06 0x200 0x508 0x790 0x0 0x1 +#define MX6SL_PAD_LCD_DAT6__ECSPI1_SS3 0x200 0x508 0x698 0x1 0x1 +#define MX6SL_PAD_LCD_DAT6__CSI_PIXCLK 0x200 0x508 0x674 0x2 0x2 +#define MX6SL_PAD_LCD_DAT6__EIM_DATA00 0x200 0x508 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT6__AUD4_TXD 0x200 0x508 0x5e8 0x4 0x1 +#define MX6SL_PAD_LCD_DAT6__GPIO2_IO26 0x200 0x508 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT6__ARM_TRACE06 0x200 0x508 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT6__SRC_BOOT_CFG06 0x200 0x508 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT7__LCD_DATA07 0x204 0x50c 0x794 0x0 0x1 +#define MX6SL_PAD_LCD_DAT7__ECSPI1_RDY 0x204 0x50c 0x680 0x1 0x1 +#define MX6SL_PAD_LCD_DAT7__CSI_MCLK 0x204 0x50c 0x000 0x2 0x0 +#define MX6SL_PAD_LCD_DAT7__EIM_DATA01 0x204 0x50c 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT7__AUDIO_CLK_OUT 0x204 0x50c 0x000 0x4 0x0 +#define MX6SL_PAD_LCD_DAT7__GPIO2_IO27 0x204 0x50c 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT7__ARM_TRACE07 0x204 0x50c 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT7__SRC_BOOT_CFG07 0x204 0x50c 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT8__LCD_DATA08 0x208 0x510 0x798 0x0 0x1 +#define MX6SL_PAD_LCD_DAT8__KEY_COL0 0x208 0x510 0x734 0x1 0x1 +#define MX6SL_PAD_LCD_DAT8__CSI_DATA09 0x208 0x510 0x654 0x2 0x1 +#define MX6SL_PAD_LCD_DAT8__EIM_DATA02 0x208 0x510 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT8__ECSPI2_SCLK 0x208 0x510 0x69c 0x4 0x2 +#define MX6SL_PAD_LCD_DAT8__GPIO2_IO28 0x208 0x510 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT8__ARM_TRACE08 0x208 0x510 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT8__SRC_BOOT_CFG08 0x208 0x510 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_DAT9__LCD_DATA09 0x20c 0x514 0x79c 0x0 0x1 +#define MX6SL_PAD_LCD_DAT9__KEY_ROW0 0x20c 0x514 0x754 0x1 0x1 +#define MX6SL_PAD_LCD_DAT9__CSI_DATA08 0x20c 0x514 0x650 0x2 0x1 +#define MX6SL_PAD_LCD_DAT9__EIM_DATA03 0x20c 0x514 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_DAT9__ECSPI2_MOSI 0x20c 0x514 0x6a4 0x4 0x2 +#define MX6SL_PAD_LCD_DAT9__GPIO2_IO29 0x20c 0x514 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_DAT9__ARM_TRACE09 0x20c 0x514 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_DAT9__SRC_BOOT_CFG09 0x20c 0x514 0x000 0x7 0x0 +#define MX6SL_PAD_LCD_ENABLE__LCD_ENABLE 0x210 0x518 0x000 0x0 0x0 +#define MX6SL_PAD_LCD_ENABLE__SD4_DATA5 0x210 0x518 0x870 0x1 0x2 +#define MX6SL_PAD_LCD_ENABLE__LCD_RD_E 0x210 0x518 0x000 0x2 0x0 +#define MX6SL_PAD_LCD_ENABLE__EIM_OE_B 0x210 0x518 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_ENABLE__UART2_RX_DATA 0x210 0x518 0x804 0x4 0x2 +#define MX6SL_PAD_LCD_ENABLE__UART2_TX_DATA 0x210 0x518 0x000 0x4 0x0 +#define MX6SL_PAD_LCD_ENABLE__GPIO2_IO16 0x210 0x518 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_HSYNC__LCD_HSYNC 0x214 0x51c 0x774 0x0 0x0 +#define MX6SL_PAD_LCD_HSYNC__SD4_DATA6 0x214 0x51c 0x874 0x1 0x2 +#define MX6SL_PAD_LCD_HSYNC__LCD_CS 0x214 0x51c 0x000 0x2 0x0 +#define MX6SL_PAD_LCD_HSYNC__EIM_CS0_B 0x214 0x51c 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_HSYNC__UART2_TX_DATA 0x214 0x51c 0x000 0x4 0x0 +#define MX6SL_PAD_LCD_HSYNC__UART2_RX_DATA 0x214 0x51c 0x804 0x4 0x3 +#define MX6SL_PAD_LCD_HSYNC__GPIO2_IO17 0x214 0x51c 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_HSYNC__ARM_TRACE_CLK 0x214 0x51c 0x000 0x6 0x0 +#define MX6SL_PAD_LCD_RESET__LCD_RESET 0x218 0x520 0x000 0x0 0x0 +#define MX6SL_PAD_LCD_RESET__EIM_DTACK_B 0x218 0x520 0x880 0x1 0x1 +#define MX6SL_PAD_LCD_RESET__LCD_BUSY 0x218 0x520 0x774 0x2 0x1 +#define MX6SL_PAD_LCD_RESET__EIM_WAIT_B 0x218 0x520 0x884 0x3 0x1 +#define MX6SL_PAD_LCD_RESET__UART2_CTS_B 0x218 0x520 0x000 0x4 0x0 +#define MX6SL_PAD_LCD_RESET__UART2_RTS_B 0x218 0x520 0x800 0x4 0x2 +#define MX6SL_PAD_LCD_RESET__GPIO2_IO19 0x218 0x520 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_RESET__CCM_PMIC_READY 0x218 0x520 0x62c 0x6 0x1 +#define MX6SL_PAD_LCD_VSYNC__LCD_VSYNC 0x21c 0x524 0x000 0x0 0x0 +#define MX6SL_PAD_LCD_VSYNC__SD4_DATA7 0x21c 0x524 0x878 0x1 0x2 +#define MX6SL_PAD_LCD_VSYNC__LCD_RS 0x21c 0x524 0x000 0x2 0x0 +#define MX6SL_PAD_LCD_VSYNC__EIM_CS1_B 0x21c 0x524 0x000 0x3 0x0 +#define MX6SL_PAD_LCD_VSYNC__UART2_RTS_B 0x21c 0x524 0x800 0x4 0x3 +#define MX6SL_PAD_LCD_VSYNC__UART2_CTS_B 0x21c 0x524 0x000 0x4 0x0 +#define MX6SL_PAD_LCD_VSYNC__GPIO2_IO18 0x21c 0x524 0x000 0x5 0x0 +#define MX6SL_PAD_LCD_VSYNC__ARM_TRACE_CTL 0x21c 0x524 0x000 0x6 0x0 +#define MX6SL_PAD_PWM1__PWM1_OUT 0x220 0x528 0x000 0x0 0x0 +#define MX6SL_PAD_PWM1__CCM_CLKO 0x220 0x528 0x000 0x1 0x0 +#define MX6SL_PAD_PWM1__AUDIO_CLK_OUT 0x220 0x528 0x000 0x2 0x0 +#define MX6SL_PAD_PWM1__FEC_REF_OUT 0x220 0x528 0x000 0x3 0x0 +#define MX6SL_PAD_PWM1__CSI_MCLK 0x220 0x528 0x000 0x4 0x0 +#define MX6SL_PAD_PWM1__GPIO3_IO23 0x220 0x528 0x000 0x5 0x0 +#define MX6SL_PAD_PWM1__EPIT1_OUT 0x220 0x528 0x000 0x6 0x0 +#define MX6SL_PAD_REF_CLK_24M__XTALOSC_REF_CLK_24M 0x224 0x52c 0x000 0x0 0x0 +#define MX6SL_PAD_REF_CLK_24M__I2C3_SCL 0x224 0x52c 0x72c 0x1 0x2 +#define MX6SL_PAD_REF_CLK_24M__PWM3_OUT 0x224 0x52c 0x000 0x2 0x0 +#define MX6SL_PAD_REF_CLK_24M__USB_OTG2_ID 0x224 0x52c 0x5e0 0x3 0x2 +#define MX6SL_PAD_REF_CLK_24M__CCM_PMIC_READY 0x224 0x52c 0x62c 0x4 0x2 +#define MX6SL_PAD_REF_CLK_24M__GPIO3_IO21 0x224 0x52c 0x000 0x5 0x0 +#define MX6SL_PAD_REF_CLK_24M__SD3_WP 0x224 0x52c 0x84c 0x6 0x3 +#define MX6SL_PAD_REF_CLK_32K__XTALOSC_REF_CLK_32K 0x228 0x530 0x000 0x0 0x0 +#define MX6SL_PAD_REF_CLK_32K__I2C3_SDA 0x228 0x530 0x730 0x1 0x2 +#define MX6SL_PAD_REF_CLK_32K__PWM4_OUT 0x228 0x530 0x000 0x2 0x0 +#define MX6SL_PAD_REF_CLK_32K__USB_OTG1_ID 0x228 0x530 0x5dc 0x3 0x3 +#define MX6SL_PAD_REF_CLK_32K__SD1_LCTL 0x228 0x530 0x000 0x4 0x0 +#define MX6SL_PAD_REF_CLK_32K__GPIO3_IO22 0x228 0x530 0x000 0x5 0x0 +#define MX6SL_PAD_REF_CLK_32K__SD3_CD_B 0x228 0x530 0x838 0x6 0x3 +#define MX6SL_PAD_SD1_CLK__SD1_CLK 0x22c 0x534 0x000 0x0 0x0 +#define MX6SL_PAD_SD1_CLK__FEC_MDIO 0x22c 0x534 0x6f4 0x1 0x2 +#define MX6SL_PAD_SD1_CLK__KEY_COL0 0x22c 0x534 0x734 0x2 0x2 +#define MX6SL_PAD_SD1_CLK__EPDC_SDCE4 0x22c 0x534 0x000 0x3 0x0 +#define MX6SL_PAD_SD1_CLK__GPIO5_IO15 0x22c 0x534 0x000 0x5 0x0 +#define MX6SL_PAD_SD1_CMD__SD1_CMD 0x230 0x538 0x000 0x0 0x0 +#define MX6SL_PAD_SD1_CMD__FEC_TX_CLK 0x230 0x538 0x70c 0x1 0x2 +#define MX6SL_PAD_SD1_CMD__KEY_ROW0 0x230 0x538 0x754 0x2 0x2 +#define MX6SL_PAD_SD1_CMD__EPDC_SDCE5 0x230 0x538 0x000 0x3 0x0 +#define MX6SL_PAD_SD1_CMD__GPIO5_IO14 0x230 0x538 0x000 0x5 0x0 +#define MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x234 0x53c 0x000 0x0 0x0 +#define MX6SL_PAD_SD1_DAT0__FEC_RX_ER 0x234 0x53c 0x708 0x1 0x2 +#define MX6SL_PAD_SD1_DAT0__KEY_COL1 0x234 0x53c 0x738 0x2 0x2 +#define MX6SL_PAD_SD1_DAT0__EPDC_SDCE6 0x234 0x53c 0x000 0x3 0x0 +#define MX6SL_PAD_SD1_DAT0__GPIO5_IO11 0x234 0x53c 0x000 0x5 0x0 +#define MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x238 0x540 0x000 0x0 0x0 +#define MX6SL_PAD_SD1_DAT1__FEC_RX_DV 0x238 0x540 0x704 0x1 0x2 +#define MX6SL_PAD_SD1_DAT1__KEY_ROW1 0x238 0x540 0x758 0x2 0x2 +#define MX6SL_PAD_SD1_DAT1__EPDC_SDCE7 0x238 0x540 0x000 0x3 0x0 +#define MX6SL_PAD_SD1_DAT1__GPIO5_IO08 0x238 0x540 0x000 0x5 0x0 +#define MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x23c 0x544 0x000 0x0 0x0 +#define MX6SL_PAD_SD1_DAT2__FEC_RX_DATA1 0x23c 0x544 0x6fc 0x1 0x2 +#define MX6SL_PAD_SD1_DAT2__KEY_COL2 0x23c 0x544 0x73c 0x2 0x2 +#define MX6SL_PAD_SD1_DAT2__EPDC_SDCE8 0x23c 0x544 0x000 0x3 0x0 +#define MX6SL_PAD_SD1_DAT2__GPIO5_IO13 0x23c 0x544 0x000 0x5 0x0 +#define MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x240 0x548 0x000 0x0 0x0 +#define MX6SL_PAD_SD1_DAT3__FEC_TX_DATA0 0x240 0x548 0x000 0x1 0x0 +#define MX6SL_PAD_SD1_DAT3__KEY_ROW2 0x240 0x548 0x75c 0x2 0x2 +#define MX6SL_PAD_SD1_DAT3__EPDC_SDCE9 0x240 0x548 0x000 0x3 0x0 +#define MX6SL_PAD_SD1_DAT3__GPIO5_IO06 0x240 0x548 0x000 0x5 0x0 +#define MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x244 0x54c 0x000 0x0 0x0 +#define MX6SL_PAD_SD1_DAT4__FEC_MDC 0x244 0x54c 0x000 0x1 0x0 +#define MX6SL_PAD_SD1_DAT4__KEY_COL3 0x244 0x54c 0x740 0x2 0x2 +#define MX6SL_PAD_SD1_DAT4__EPDC_SDCLK_N 0x244 0x54c 0x000 0x3 0x0 +#define MX6SL_PAD_SD1_DAT4__UART4_RX_DATA 0x244 0x54c 0x814 0x4 0x4 +#define MX6SL_PAD_SD1_DAT4__UART4_TX_DATA 0x244 0x54c 0x000 0x4 0x0 +#define MX6SL_PAD_SD1_DAT4__GPIO5_IO12 0x244 0x54c 0x000 0x5 0x0 +#define MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x248 0x550 0x000 0x0 0x0 +#define MX6SL_PAD_SD1_DAT5__FEC_RX_DATA0 0x248 0x550 0x6f8 0x1 0x2 +#define MX6SL_PAD_SD1_DAT5__KEY_ROW3 0x248 0x550 0x760 0x2 0x2 +#define MX6SL_PAD_SD1_DAT5__EPDC_SDOED 0x248 0x550 0x000 0x3 0x0 +#define MX6SL_PAD_SD1_DAT5__UART4_TX_DATA 0x248 0x550 0x000 0x4 0x0 +#define MX6SL_PAD_SD1_DAT5__UART4_RX_DATA 0x248 0x550 0x814 0x4 0x5 +#define MX6SL_PAD_SD1_DAT5__GPIO5_IO09 0x248 0x550 0x000 0x5 0x0 +#define MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x24c 0x554 0x000 0x0 0x0 +#define MX6SL_PAD_SD1_DAT6__FEC_TX_EN 0x24c 0x554 0x000 0x1 0x0 +#define MX6SL_PAD_SD1_DAT6__KEY_COL4 0x24c 0x554 0x744 0x2 0x2 +#define MX6SL_PAD_SD1_DAT6__EPDC_SDOEZ 0x24c 0x554 0x000 0x3 0x0 +#define MX6SL_PAD_SD1_DAT6__UART4_RTS_B 0x24c 0x554 0x810 0x4 0x4 +#define MX6SL_PAD_SD1_DAT6__UART4_CTS_B 0x24c 0x554 0x000 0x4 0x0 +#define MX6SL_PAD_SD1_DAT6__GPIO5_IO07 0x24c 0x554 0x000 0x5 0x0 +#define MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x250 0x558 0x000 0x0 0x0 +#define MX6SL_PAD_SD1_DAT7__FEC_TX_DATA1 0x250 0x558 0x000 0x1 0x0 +#define MX6SL_PAD_SD1_DAT7__KEY_ROW4 0x250 0x558 0x764 0x2 0x2 +#define MX6SL_PAD_SD1_DAT7__CCM_PMIC_READY 0x250 0x558 0x62c 0x3 0x3 +#define MX6SL_PAD_SD1_DAT7__UART4_CTS_B 0x250 0x558 0x000 0x4 0x0 +#define MX6SL_PAD_SD1_DAT7__UART4_RTS_B 0x250 0x558 0x810 0x4 0x5 +#define MX6SL_PAD_SD1_DAT7__GPIO5_IO10 0x250 0x558 0x000 0x5 0x0 +#define MX6SL_PAD_SD2_CLK__SD2_CLK 0x254 0x55c 0x000 0x0 0x0 +#define MX6SL_PAD_SD2_CLK__AUD4_RXFS 0x254 0x55c 0x5f0 0x1 0x2 +#define MX6SL_PAD_SD2_CLK__ECSPI3_SCLK 0x254 0x55c 0x6b0 0x2 0x2 +#define MX6SL_PAD_SD2_CLK__CSI_DATA00 0x254 0x55c 0x630 0x3 0x2 +#define MX6SL_PAD_SD2_CLK__GPIO5_IO05 0x254 0x55c 0x000 0x5 0x0 +#define MX6SL_PAD_SD2_CMD__SD2_CMD 0x258 0x560 0x000 0x0 0x0 +#define MX6SL_PAD_SD2_CMD__AUD4_RXC 0x258 0x560 0x5ec 0x1 0x2 +#define MX6SL_PAD_SD2_CMD__ECSPI3_SS0 0x258 0x560 0x6c0 0x2 0x2 +#define MX6SL_PAD_SD2_CMD__CSI_DATA01 0x258 0x560 0x634 0x3 0x2 +#define MX6SL_PAD_SD2_CMD__EPIT1_OUT 0x258 0x560 0x000 0x4 0x0 +#define MX6SL_PAD_SD2_CMD__GPIO5_IO04 0x258 0x560 0x000 0x5 0x0 +#define MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x25c 0x564 0x000 0x0 0x0 +#define MX6SL_PAD_SD2_DAT0__AUD4_RXD 0x25c 0x564 0x5e4 0x1 0x2 +#define MX6SL_PAD_SD2_DAT0__ECSPI3_MOSI 0x25c 0x564 0x6bc 0x2 0x2 +#define MX6SL_PAD_SD2_DAT0__CSI_DATA02 0x25c 0x564 0x638 0x3 0x2 +#define MX6SL_PAD_SD2_DAT0__UART5_RTS_B 0x25c 0x564 0x818 0x4 0x4 +#define MX6SL_PAD_SD2_DAT0__UART5_CTS_B 0x25c 0x564 0x000 0x4 0x0 +#define MX6SL_PAD_SD2_DAT0__GPIO5_IO01 0x25c 0x564 0x000 0x5 0x0 +#define MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x260 0x568 0x000 0x0 0x0 +#define MX6SL_PAD_SD2_DAT1__AUD4_TXC 0x260 0x568 0x5f4 0x1 0x2 +#define MX6SL_PAD_SD2_DAT1__ECSPI3_MISO 0x260 0x568 0x6b8 0x2 0x2 +#define MX6SL_PAD_SD2_DAT1__CSI_DATA03 0x260 0x568 0x63c 0x3 0x2 +#define MX6SL_PAD_SD2_DAT1__UART5_CTS_B 0x260 0x568 0x000 0x4 0x0 +#define MX6SL_PAD_SD2_DAT1__UART5_RTS_B 0x260 0x568 0x818 0x4 0x5 +#define MX6SL_PAD_SD2_DAT1__GPIO4_IO30 0x260 0x568 0x000 0x5 0x0 +#define MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x264 0x56c 0x000 0x0 0x0 +#define MX6SL_PAD_SD2_DAT2__AUD4_TXFS 0x264 0x56c 0x5f8 0x1 0x2 +#define MX6SL_PAD_SD2_DAT2__FEC_COL 0x264 0x56c 0x6f0 0x2 0x1 +#define MX6SL_PAD_SD2_DAT2__CSI_DATA04 0x264 0x56c 0x640 0x3 0x2 +#define MX6SL_PAD_SD2_DAT2__UART5_RX_DATA 0x264 0x56c 0x81c 0x4 0x4 +#define MX6SL_PAD_SD2_DAT2__UART5_TX_DATA 0x264 0x56c 0x000 0x4 0x0 +#define MX6SL_PAD_SD2_DAT2__GPIO5_IO03 0x264 0x56c 0x000 0x5 0x0 +#define MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x268 0x570 0x000 0x0 0x0 +#define MX6SL_PAD_SD2_DAT3__AUD4_TXD 0x268 0x570 0x5e8 0x1 0x2 +#define MX6SL_PAD_SD2_DAT3__FEC_RX_CLK 0x268 0x570 0x700 0x2 0x1 +#define MX6SL_PAD_SD2_DAT3__CSI_DATA05 0x268 0x570 0x644 0x3 0x2 +#define MX6SL_PAD_SD2_DAT3__UART5_TX_DATA 0x268 0x570 0x000 0x4 0x0 +#define MX6SL_PAD_SD2_DAT3__UART5_RX_DATA 0x268 0x570 0x81c 0x4 0x5 +#define MX6SL_PAD_SD2_DAT3__GPIO4_IO28 0x268 0x570 0x000 0x5 0x0 +#define MX6SL_PAD_SD2_DAT4__SD2_DATA4 0x26c 0x574 0x000 0x0 0x0 +#define MX6SL_PAD_SD2_DAT4__SD3_DATA4 0x26c 0x574 0x83c 0x1 0x1 +#define MX6SL_PAD_SD2_DAT4__UART2_RX_DATA 0x26c 0x574 0x804 0x2 0x4 +#define MX6SL_PAD_SD2_DAT4__UART2_TX_DATA 0x26c 0x574 0x000 0x2 0x0 +#define MX6SL_PAD_SD2_DAT4__CSI_DATA06 0x26c 0x574 0x648 0x3 0x2 +#define MX6SL_PAD_SD2_DAT4__SPDIF_OUT 0x26c 0x574 0x000 0x4 0x0 +#define MX6SL_PAD_SD2_DAT4__GPIO5_IO02 0x26c 0x574 0x000 0x5 0x0 +#define MX6SL_PAD_SD2_DAT5__SD2_DATA5 0x270 0x578 0x000 0x0 0x0 +#define MX6SL_PAD_SD2_DAT5__SD3_DATA5 0x270 0x578 0x840 0x1 0x1 +#define MX6SL_PAD_SD2_DAT5__UART2_TX_DATA 0x270 0x578 0x000 0x2 0x0 +#define MX6SL_PAD_SD2_DAT5__UART2_RX_DATA 0x270 0x578 0x804 0x2 0x5 +#define MX6SL_PAD_SD2_DAT5__CSI_DATA07 0x270 0x578 0x64c 0x3 0x2 +#define MX6SL_PAD_SD2_DAT5__SPDIF_IN 0x270 0x578 0x7f0 0x4 0x2 +#define MX6SL_PAD_SD2_DAT5__GPIO4_IO31 0x270 0x578 0x000 0x5 0x0 +#define MX6SL_PAD_SD2_DAT6__SD2_DATA6 0x274 0x57c 0x000 0x0 0x0 +#define MX6SL_PAD_SD2_DAT6__SD3_DATA6 0x274 0x57c 0x844 0x1 0x1 +#define MX6SL_PAD_SD2_DAT6__UART2_RTS_B 0x274 0x57c 0x800 0x2 0x4 +#define MX6SL_PAD_SD2_DAT6__UART2_CTS_B 0x274 0x57c 0x000 0x2 0x0 +#define MX6SL_PAD_SD2_DAT6__CSI_DATA08 0x274 0x57c 0x650 0x3 0x2 +#define MX6SL_PAD_SD2_DAT6__SD2_WP 0x274 0x57c 0x834 0x4 0x2 +#define MX6SL_PAD_SD2_DAT6__GPIO4_IO29 0x274 0x57c 0x000 0x5 0x0 +#define MX6SL_PAD_SD2_DAT7__SD2_DATA7 0x278 0x580 0x000 0x0 0x0 +#define MX6SL_PAD_SD2_DAT7__SD3_DATA7 0x278 0x580 0x848 0x1 0x1 +#define MX6SL_PAD_SD2_DAT7__UART2_CTS_B 0x278 0x580 0x000 0x2 0x0 +#define MX6SL_PAD_SD2_DAT7__UART2_RTS_B 0x278 0x580 0x800 0x2 0x5 +#define MX6SL_PAD_SD2_DAT7__CSI_DATA09 0x278 0x580 0x654 0x3 0x2 +#define MX6SL_PAD_SD2_DAT7__SD2_CD_B 0x278 0x580 0x830 0x4 0x2 +#define MX6SL_PAD_SD2_DAT7__GPIO5_IO00 0x278 0x580 0x000 0x5 0x0 +#define MX6SL_PAD_SD2_RST__SD2_RESET 0x27c 0x584 0x000 0x0 0x0 +#define MX6SL_PAD_SD2_RST__FEC_REF_OUT 0x27c 0x584 0x000 0x1 0x0 +#define MX6SL_PAD_SD2_RST__WDOG2_B 0x27c 0x584 0x000 0x2 0x0 +#define MX6SL_PAD_SD2_RST__SPDIF_OUT 0x27c 0x584 0x000 0x3 0x0 +#define MX6SL_PAD_SD2_RST__CSI_MCLK 0x27c 0x584 0x000 0x4 0x0 +#define MX6SL_PAD_SD2_RST__GPIO4_IO27 0x27c 0x584 0x000 0x5 0x0 +#define MX6SL_PAD_SD3_CLK__SD3_CLK 0x280 0x588 0x000 0x0 0x0 +#define MX6SL_PAD_SD3_CLK__AUD5_RXFS 0x280 0x588 0x608 0x1 0x1 +#define MX6SL_PAD_SD3_CLK__KEY_COL5 0x280 0x588 0x748 0x2 0x2 +#define MX6SL_PAD_SD3_CLK__CSI_DATA10 0x280 0x588 0x658 0x3 0x2 +#define MX6SL_PAD_SD3_CLK__WDOG1_RESET_B_DEB 0x280 0x588 0x000 0x4 0x0 +#define MX6SL_PAD_SD3_CLK__GPIO5_IO18 0x280 0x588 0x000 0x5 0x0 +#define MX6SL_PAD_SD3_CLK__USB_OTG1_PWR 0x280 0x588 0x000 0x6 0x0 +#define MX6SL_PAD_SD3_CMD__SD3_CMD 0x284 0x58c 0x000 0x0 0x0 +#define MX6SL_PAD_SD3_CMD__AUD5_RXC 0x284 0x58c 0x604 0x1 0x1 +#define MX6SL_PAD_SD3_CMD__KEY_ROW5 0x284 0x58c 0x768 0x2 0x2 +#define MX6SL_PAD_SD3_CMD__CSI_DATA11 0x284 0x58c 0x65c 0x3 0x2 +#define MX6SL_PAD_SD3_CMD__USB_OTG2_ID 0x284 0x58c 0x5e0 0x4 0x3 +#define MX6SL_PAD_SD3_CMD__GPIO5_IO21 0x284 0x58c 0x000 0x5 0x0 +#define MX6SL_PAD_SD3_CMD__USB_OTG2_PWR 0x284 0x58c 0x000 0x6 0x0 +#define MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x288 0x590 0x000 0x0 0x0 +#define MX6SL_PAD_SD3_DAT0__AUD5_RXD 0x288 0x590 0x5fc 0x1 0x1 +#define MX6SL_PAD_SD3_DAT0__KEY_COL6 0x288 0x590 0x74c 0x2 0x2 +#define MX6SL_PAD_SD3_DAT0__CSI_DATA12 0x288 0x590 0x660 0x3 0x1 +#define MX6SL_PAD_SD3_DAT0__USB_OTG1_ID 0x288 0x590 0x5dc 0x4 0x4 +#define MX6SL_PAD_SD3_DAT0__GPIO5_IO19 0x288 0x590 0x000 0x5 0x0 +#define MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x28c 0x594 0x000 0x0 0x0 +#define MX6SL_PAD_SD3_DAT1__AUD5_TXC 0x28c 0x594 0x60c 0x1 0x1 +#define MX6SL_PAD_SD3_DAT1__KEY_ROW6 0x28c 0x594 0x76c 0x2 0x2 +#define MX6SL_PAD_SD3_DAT1__CSI_DATA13 0x28c 0x594 0x664 0x3 0x1 +#define MX6SL_PAD_SD3_DAT1__SD1_VSELECT 0x28c 0x594 0x000 0x4 0x0 +#define MX6SL_PAD_SD3_DAT1__GPIO5_IO20 0x28c 0x594 0x000 0x5 0x0 +#define MX6SL_PAD_SD3_DAT1__JTAG_DE_B 0x28c 0x594 0x000 0x6 0x0 +#define MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x290 0x598 0x000 0x0 0x0 +#define MX6SL_PAD_SD3_DAT2__AUD5_TXFS 0x290 0x598 0x610 0x1 0x1 +#define MX6SL_PAD_SD3_DAT2__KEY_COL7 0x290 0x598 0x750 0x2 0x2 +#define MX6SL_PAD_SD3_DAT2__CSI_DATA14 0x290 0x598 0x668 0x3 0x1 +#define MX6SL_PAD_SD3_DAT2__EPIT1_OUT 0x290 0x598 0x000 0x4 0x0 +#define MX6SL_PAD_SD3_DAT2__GPIO5_IO16 0x290 0x598 0x000 0x5 0x0 +#define MX6SL_PAD_SD3_DAT2__USB_OTG2_OC 0x290 0x598 0x820 0x6 0x3 +#define MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x294 0x59c 0x000 0x0 0x0 +#define MX6SL_PAD_SD3_DAT3__AUD5_TXD 0x294 0x59c 0x600 0x1 0x1 +#define MX6SL_PAD_SD3_DAT3__KEY_ROW7 0x294 0x59c 0x770 0x2 0x2 +#define MX6SL_PAD_SD3_DAT3__CSI_DATA15 0x294 0x59c 0x66c 0x3 0x1 +#define MX6SL_PAD_SD3_DAT3__EPIT2_OUT 0x294 0x59c 0x000 0x4 0x0 +#define MX6SL_PAD_SD3_DAT3__GPIO5_IO17 0x294 0x59c 0x000 0x5 0x0 +#define MX6SL_PAD_SD3_DAT3__USB_OTG1_OC 0x294 0x59c 0x824 0x6 0x2 +#define MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x298 0x5a0 0x7fc 0x0 0x0 +#define MX6SL_PAD_UART1_RXD__UART1_TX_DATA 0x298 0x5a0 0x000 0x0 0x0 +#define MX6SL_PAD_UART1_RXD__PWM1_OUT 0x298 0x5a0 0x000 0x1 0x0 +#define MX6SL_PAD_UART1_RXD__UART4_RX_DATA 0x298 0x5a0 0x814 0x2 0x6 +#define MX6SL_PAD_UART1_RXD__UART4_TX_DATA 0x298 0x5a0 0x000 0x2 0x0 +#define MX6SL_PAD_UART1_RXD__FEC_COL 0x298 0x5a0 0x6f0 0x3 0x2 +#define MX6SL_PAD_UART1_RXD__UART5_RX_DATA 0x298 0x5a0 0x81c 0x4 0x6 +#define MX6SL_PAD_UART1_RXD__UART5_TX_DATA 0x298 0x5a0 0x000 0x4 0x0 +#define MX6SL_PAD_UART1_RXD__GPIO3_IO16 0x298 0x5a0 0x000 0x5 0x0 +#define MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x29c 0x5a4 0x000 0x0 0x0 +#define MX6SL_PAD_UART1_TXD__UART1_RX_DATA 0x29c 0x5a4 0x7fc 0x0 0x1 +#define MX6SL_PAD_UART1_TXD__PWM2_OUT 0x29c 0x5a4 0x000 0x1 0x0 +#define MX6SL_PAD_UART1_TXD__UART4_TX_DATA 0x29c 0x5a4 0x000 0x2 0x0 +#define MX6SL_PAD_UART1_TXD__UART4_RX_DATA 0x29c 0x5a4 0x814 0x2 0x7 +#define MX6SL_PAD_UART1_TXD__FEC_RX_CLK 0x29c 0x5a4 0x700 0x3 0x2 +#define MX6SL_PAD_UART1_TXD__UART5_TX_DATA 0x29c 0x5a4 0x000 0x4 0x0 +#define MX6SL_PAD_UART1_TXD__UART5_RX_DATA 0x29c 0x5a4 0x81c 0x4 0x7 +#define MX6SL_PAD_UART1_TXD__GPIO3_IO17 0x29c 0x5a4 0x000 0x5 0x0 +#define MX6SL_PAD_UART1_TXD__UART5_DCD_B 0x29c 0x5a4 0x000 0x7 0x0 +#define MX6SL_PAD_WDOG_B__WDOG1_B 0x2a0 0x5a8 0x000 0x0 0x0 +#define MX6SL_PAD_WDOG_B__WDOG1_RESET_B_DEB 0x2a0 0x5a8 0x000 0x1 0x0 +#define MX6SL_PAD_WDOG_B__UART5_RI_B 0x2a0 0x5a8 0x000 0x2 0x0 +#define MX6SL_PAD_WDOG_B__GPIO3_IO18 0x2a0 0x5a8 0x000 0x5 0x0 + +#endif /* __DTS_IMX6SL_PINFUNC_H */ diff --git a/arch/arm/boot/dts/include/dt-bindings b/arch/arm/boot/dts/include/dt-bindings new file mode 120000 index 000000000000..08c00e4972fa --- /dev/null +++ b/arch/arm/boot/dts/include/dt-bindings @@ -0,0 +1 @@ +../../../../../include/dt-bindings
\ No newline at end of file diff --git a/arch/arm/boot/dts/integratorcp.dts b/arch/arm/boot/dts/integratorcp.dts index 8b119399025a..ff1aea0ee043 100644 --- a/arch/arm/boot/dts/integratorcp.dts +++ b/arch/arm/boot/dts/integratorcp.dts @@ -24,15 +24,15 @@ }; timer0: timer@13000000 { - compatible = "arm,sp804", "arm,primecell"; + compatible = "arm,integrator-cp-timer"; }; timer1: timer@13000100 { - compatible = "arm,sp804", "arm,primecell"; + compatible = "arm,integrator-cp-timer"; }; timer2: timer@13000200 { - compatible = "arm,sp804", "arm,primecell"; + compatible = "arm,integrator-cp-timer"; }; pic: pic@14000000 { diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi index 192cf76fbf93..23991e45bc55 100644 --- a/arch/arm/boot/dts/kirkwood-6282.dtsi +++ b/arch/arm/boot/dts/kirkwood-6282.dtsi @@ -49,6 +49,12 @@ }; }; + thermal@10078 { + compatible = "marvell,kirkwood-thermal"; + reg = <0x10078 0x4>; + status = "okay"; + }; + i2c@11100 { compatible = "marvell,mv64xxx-i2c"; reg = <0x11100 0x20>; diff --git a/arch/arm/boot/dts/kirkwood-cloudbox.dts b/arch/arm/boot/dts/kirkwood-cloudbox.dts new file mode 100644 index 000000000000..5f21d4e427b0 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-cloudbox.dts @@ -0,0 +1,89 @@ +/dts-v1/; + +/include/ "kirkwood.dtsi" +/include/ "kirkwood-6281.dtsi" + +/ { + model = "LaCie CloudBox"; + compatible = "lacie,cloudbox", "marvell,kirkwood-88f6702", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8"; + }; + + ocp@f1000000 { + pinctrl: pinctrl@10000 { + pinctrl-0 = < &pmx_spi &pmx_uart0 + &pmx_cloudbox_sata0 >; + pinctrl-names = "default"; + + pmx_cloudbox_sata0: pmx-cloudbox-sata0 { + marvell,pins = "mpp15"; + marvell,function = "sata0"; + }; + }; + + serial@12000 { + clock-frequency = <166666667>; + status = "okay"; + }; + + sata@80000 { + status = "okay"; + nr-ports = <1>; + }; + + spi@10600 { + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l4005a"; + reg = <0>; + spi-max-frequency = <20000000>; + mode = <0>; + + partition@0 { + reg = <0x0 0x80000>; + label = "u-boot"; + }; + }; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + button@1 { + label = "Power push button"; + linux,code = <116>; + gpios = <&gpio0 16 1>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + red-fail { + label = "cloudbox:red:fail"; + gpios = <&gpio0 14 0>; + }; + blue-sata { + label = "cloudbox:blue:sata"; + gpios = <&gpio0 15 0>; + }; + }; + + gpio_poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio0 17 0>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts index 9555a86297c2..44fd97dfc1f3 100644 --- a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts +++ b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts @@ -69,6 +69,10 @@ status = "okay"; nr-ports = <1>; }; + + mvsdio@90000 { + status = "okay"; + }; }; gpio-leds { diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts new file mode 100644 index 000000000000..1ca66ab83ad6 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts @@ -0,0 +1,180 @@ +/dts-v1/; + +/include/ "kirkwood.dtsi" +/include/ "kirkwood-6282.dtsi" + +/ { + model = "NETGEAR ReadyNAS Duo v2"; + compatible = "netgear,readynas-duo-v2", "netgear,readynas", "marvell,kirkwood-88f6282", "marvell,kirkwood"; + + memory { /* 256 MB */ + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pinctrl-0 = < &pmx_uart0 + &pmx_button_power + &pmx_button_backup + &pmx_button_reset + &pmx_led_blue_power + &pmx_led_blue_activity + &pmx_led_blue_disk1 + &pmx_led_blue_disk2 + &pmx_led_blue_backup >; + pinctrl-names = "default"; + + pmx_button_power: pmx-button-power { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + pmx_button_backup: pmx-button-backup { + marvell,pins = "mpp45"; + marvell,function = "gpio"; + }; + pmx_button_reset: pmx-button-reset { + marvell,pins = "mpp13"; + marvell,function = "gpio"; + }; + pmx_led_blue_power: pmx-led-blue-power { + marvell,pins = "mpp31"; + marvell,function = "gpio"; + }; + pmx_led_blue_activity: pmx-led-blue-activity { + marvell,pins = "mpp38"; + marvell,function = "gpio"; + }; + pmx_led_blue_disk1: pmx-led-blue-disk1 { + marvell,pins = "mpp23"; + marvell,function = "gpio"; + }; + pmx_led_blue_disk2: pmx-led-blue-disk2 { + marvell,pins = "mpp22"; + marvell,function = "gpio"; + }; + pmx_led_blue_backup: pmx-led-blue-backup { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + }; + + i2c@11000 { + status = "okay"; + + rs5c372a: rs5c372a@32 { + compatible = "ricoh,rs5c372a"; + reg = <0x32>; + }; + }; + + serial@12000 { + status = "okay"; + }; + + nand@3000000 { + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x180000>; + read-only; + }; + + partition@180000 { + label = "u-boot-env"; + reg = <0x180000 0x20000>; + }; + + partition@200000 { + label = "uImage"; + reg = <0x0200000 0x600000>; + }; + + partition@800000 { + label = "minirootfs"; + reg = <0x0800000 0x1000000>; + }; + + partition@1800000 { + label = "jffs2"; + reg = <0x1800000 0x6800000>; + }; + }; + + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + power_led { + label = "status:blue:power_led"; + gpios = <&gpio0 31 1>; /* GPIO 31 Active Low */ + linux,default-trigger = "default-on"; + }; + activity_led { + label = "status:blue:activity_led"; + gpios = <&gpio1 6 1>; /* GPIO 38 Active Low */ + }; + disk1_led { + label = "status:blue:disk1_led"; + gpios = <&gpio0 23 1>; /* GPIO 23 Active Low */ + }; + disk2_led { + label = "status:blue:disk2_led"; + gpios = <&gpio0 22 1>; /* GPIO 22 Active Low */ + }; + backup_led { + label = "status:blue:backup_led"; + gpios = <&gpio0 29 1>; /* GPIO 29 Active Low*/ + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + button@1 { + label = "Power Button"; + linux,code = <116>; /* KEY_POWER */ + gpios = <&gpio1 15 1>; + }; + button@2 { + label = "Reset Button"; + linux,code = <0x198>; /* KEY_RESTART */ + gpios = <&gpio0 13 1>; + }; + button@3 { + label = "Backup Button"; + linux,code = <133>; /* KEY_COPY */ + gpios = <&gpio1 13 1>; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + usb_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "USB 3.0 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 14 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-ns2mini.dts b/arch/arm/boot/dts/kirkwood-ns2mini.dts index b79f5eb25589..adab1ab25733 100644 --- a/arch/arm/boot/dts/kirkwood-ns2mini.dts +++ b/arch/arm/boot/dts/kirkwood-ns2mini.dts @@ -3,6 +3,7 @@ /include/ "kirkwood-ns2-common.dtsi" / { + /* This machine is embedded in the first LaCie CloudBox product. */ model = "LaCie Network Space Mini v2"; compatible = "lacie,netspace_mini_v2", "marvell,kirkwood-88f6192", "marvell,kirkwood"; diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi index 1429ac05b36d..4e8b08c628c7 100644 --- a/arch/arm/boot/dts/mmp2.dtsi +++ b/arch/arm/boot/dts/mmp2.dtsi @@ -160,7 +160,7 @@ }; gpio@d4019000 { - compatible = "mrvl,mmp-gpio"; + compatible = "marvell,mmp2-gpio"; #address-cells = <1>; #size-cells = <1>; reg = <0xd4019000 0x1000>; diff --git a/arch/arm/boot/dts/mpa1600.dts b/arch/arm/boot/dts/mpa1600.dts new file mode 100644 index 000000000000..317300875f34 --- /dev/null +++ b/arch/arm/boot/dts/mpa1600.dts @@ -0,0 +1,69 @@ +/* + * mpa1600.dts - Device Tree file for Phontech MPA 1600 + * + * Copyright (C) 2013 Joachim Eastwood <manabian@gmail.com> + * + * Licensed under GPLv2 only + */ +/dts-v1/; +/include/ "at91rm9200.dtsi" + +/ { + model = "Phontech MPA 1600"; + compatible = "phontech,mpa1600", "atmel,at91rm9200"; + + memory { + reg = <0x20000000 0x4000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock@0 { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <18432000>; + }; + }; + + ahb { + apb { + dbgu: serial@fffff200 { + status = "okay"; + }; + + macb0: ethernet@fffbc000 { + phy-mode = "rmii"; + status = "okay"; + }; + + ssc0: ssc@fffd0000 { + status = "okay"; + }; + + ssc1: ssc@fffd4000 { + status = "okay"; + }; + }; + + usb0: ohci@00300000 { + num-ports = <1>; + status = "okay"; + }; + }; + + i2c@0 { + status = "okay"; + }; + + gpio_keys { + compatible = "gpio-keys"; + + monitor_mute { + label = "Monitor mute"; + gpios = <&pioC 1 1>; + linux,code = <113>; + }; + }; +}; diff --git a/arch/arm/boot/dts/msm8660-surf.dts b/arch/arm/boot/dts/msm8660-surf.dts index 31f2157cd7d7..9bf49b3826ea 100644 --- a/arch/arm/boot/dts/msm8660-surf.dts +++ b/arch/arm/boot/dts/msm8660-surf.dts @@ -16,19 +16,13 @@ }; timer@2000004 { - compatible = "qcom,msm-gpt", "qcom,msm-timer"; - interrupts = <1 1 0x301>; - reg = <0x02000004 0x10>; - clock-frequency = <32768>; - cpu-offset = <0x40000>; - }; - - timer@2000024 { - compatible = "qcom,msm-dgt", "qcom,msm-timer"; - interrupts = <1 0 0x301>; - reg = <0x02000024 0x10>, - <0x02000034 0x4>; - clock-frequency = <6750000>; + compatible = "qcom,scss-timer", "qcom,msm-timer"; + interrupts = <1 0 0x301>, + <1 1 0x301>, + <1 2 0x301>; + reg = <0x02000000 0x100>; + clock-frequency = <27000000>, + <32768>; cpu-offset = <0x40000>; }; @@ -38,4 +32,10 @@ <0x19c00000 0x1000>; interrupts = <0 195 0x0>; }; + + qcom,ssbi@500000 { + compatible = "qcom,ssbi"; + reg = <0x500000 0x1000>; + qcom,controller-type = "pmic-arbiter"; + }; }; diff --git a/arch/arm/boot/dts/msm8960-cdp.dts b/arch/arm/boot/dts/msm8960-cdp.dts index 9e621b5ad3dd..2e4d87a125d6 100644 --- a/arch/arm/boot/dts/msm8960-cdp.dts +++ b/arch/arm/boot/dts/msm8960-cdp.dts @@ -15,20 +15,14 @@ < 0x02002000 0x1000 >; }; - timer@200a004 { - compatible = "qcom,msm-gpt", "qcom,msm-timer"; - interrupts = <1 2 0x301>; - reg = <0x0200a004 0x10>; - clock-frequency = <32768>; - cpu-offset = <0x80000>; - }; - - timer@200a024 { - compatible = "qcom,msm-dgt", "qcom,msm-timer"; - interrupts = <1 1 0x301>; - reg = <0x0200a024 0x10>, - <0x0200a034 0x4>; - clock-frequency = <6750000>; + timer@200a000 { + compatible = "qcom,kpss-timer", "qcom,msm-timer"; + interrupts = <1 1 0x301>, + <1 2 0x301>, + <1 3 0x301>; + reg = <0x0200a000 0x100>; + clock-frequency = <27000000>, + <32768>; cpu-offset = <0x80000>; }; @@ -38,4 +32,10 @@ <0x16400000 0x1000>; interrupts = <0 154 0x0>; }; + + qcom,ssbi@500000 { + compatible = "qcom,ssbi"; + reg = <0x500000 0x1000>; + qcom,controller-type = "pmic-arbiter"; + }; }; diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi index 761c4b69b25b..37aa7487d4d8 100644 --- a/arch/arm/boot/dts/omap2.dtsi +++ b/arch/arm/boot/dts/omap2.dtsi @@ -26,6 +26,11 @@ }; }; + pmu { + compatible = "arm,arm1136-pmu"; + interrupts = <3>; + }; + soc { compatible = "ti,omap-infra"; mpu { @@ -49,6 +54,18 @@ reg = <0x480FE000 0x1000>; }; + sdma: dma-controller@48056000 { + compatible = "ti,omap2430-sdma", "ti,omap2420-sdma"; + reg = <0x48056000 0x1000>; + interrupts = <12>, + <13>, + <14>, + <15>; + #dma-cells = <1>; + #dma-channels = <32>; + #dma-requests = <64>; + }; + uart1: serial@4806a000 { compatible = "ti,omap2-uart"; ti,hwmods = "uart1"; @@ -68,28 +85,28 @@ }; timer2: timer@4802a000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap2420-timer"; reg = <0x4802a000 0x400>; interrupts = <38>; ti,hwmods = "timer2"; }; timer3: timer@48078000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap2420-timer"; reg = <0x48078000 0x400>; interrupts = <39>; ti,hwmods = "timer3"; }; timer4: timer@4807a000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap2420-timer"; reg = <0x4807a000 0x400>; interrupts = <40>; ti,hwmods = "timer4"; }; timer5: timer@4807c000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap2420-timer"; reg = <0x4807c000 0x400>; interrupts = <41>; ti,hwmods = "timer5"; @@ -97,7 +114,7 @@ }; timer6: timer@4807e000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap2420-timer"; reg = <0x4807e000 0x400>; interrupts = <42>; ti,hwmods = "timer6"; @@ -105,7 +122,7 @@ }; timer7: timer@48080000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap2420-timer"; reg = <0x48080000 0x400>; interrupts = <43>; ti,hwmods = "timer7"; @@ -113,7 +130,7 @@ }; timer8: timer@48082000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap2420-timer"; reg = <0x48082000 0x400>; interrupts = <44>; ti,hwmods = "timer8"; @@ -121,7 +138,7 @@ }; timer9: timer@48084000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap2420-timer"; reg = <0x48084000 0x400>; interrupts = <45>; ti,hwmods = "timer9"; @@ -129,7 +146,7 @@ }; timer10: timer@48086000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap2420-timer"; reg = <0x48086000 0x400>; interrupts = <46>; ti,hwmods = "timer10"; @@ -137,7 +154,7 @@ }; timer11: timer@48088000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap2420-timer"; reg = <0x48088000 0x400>; interrupts = <47>; ti,hwmods = "timer11"; @@ -145,7 +162,7 @@ }; timer12: timer@4808a000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap2420-timer"; reg = <0x4808a000 0x400>; interrupts = <48>; ti,hwmods = "timer12"; diff --git a/arch/arm/boot/dts/omap2420-h4.dts b/arch/arm/boot/dts/omap2420-h4.dts index 9b0d07746cba..68282ee13e26 100644 --- a/arch/arm/boot/dts/omap2420-h4.dts +++ b/arch/arm/boot/dts/omap2420-h4.dts @@ -18,3 +18,49 @@ reg = <0x80000000 0x4000000>; /* 64 MB */ }; }; + +&gpmc { + ranges = <0 0 0x08000000 0x04000000>; + + nor@0,0 { + compatible = "cfi-flash"; + linux,mtd-name= "intel,ge28f256l18b85"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0 0 0x04000000>; + bank-width = <2>; + + gpmc,mux-add-data = <2>; + gpmc,cs-on-ns = <10>; + gpmc,cs-rd-off-ns = <160>; + gpmc,cs-wr-off-ns = <160>; + gpmc,adv-on-ns = <20>; + gpmc,adv-rd-off-ns = <50>; + gpmc,adv-wr-off-ns = <50>; + gpmc,oe-on-ns = <60>; + gpmc,oe-off-ns = <120>; + gpmc,we-on-ns = <60>; + gpmc,we-off-ns = <120>; + gpmc,rd-cycle-ns = <170>; + gpmc,wr-cycle-ns = <170>; + gpmc,access-ns = <150>; + gpmc,page-burst-access-ns = <10>; + + partition@0 { + label = "bootloader"; + reg = <0 0x20000>; + }; + partition@0x20000 { + label = "params"; + reg = <0x20000 0x20000>; + }; + partition@0x40000 { + label = "kernel"; + reg = <0x40000 0x200000>; + }; + partition@0x240000 { + label = "file-system"; + reg = <0x240000 0x3dc0000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi index af6560908905..da5b285b73be 100644 --- a/arch/arm/boot/dts/omap2420.dtsi +++ b/arch/arm/boot/dts/omap2420.dtsi @@ -29,6 +29,65 @@ pinctrl-single,function-mask = <0x3f>; }; + gpio1: gpio@48018000 { + compatible = "ti,omap2-gpio"; + reg = <0x48018000 0x200>; + interrupts = <29>; + ti,hwmods = "gpio1"; + ti,gpio-always-on; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio2: gpio@4801a000 { + compatible = "ti,omap2-gpio"; + reg = <0x4801a000 0x200>; + interrupts = <30>; + ti,hwmods = "gpio2"; + ti,gpio-always-on; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio3: gpio@4801c000 { + compatible = "ti,omap2-gpio"; + reg = <0x4801c000 0x200>; + interrupts = <31>; + ti,hwmods = "gpio3"; + ti,gpio-always-on; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio4: gpio@4801e000 { + compatible = "ti,omap2-gpio"; + reg = <0x4801e000 0x200>; + interrupts = <32>; + ti,hwmods = "gpio4"; + ti,gpio-always-on; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpmc: gpmc@6800a000 { + compatible = "ti,omap2420-gpmc"; + reg = <0x6800a000 0x1000>; + #address-cells = <2>; + #size-cells = <1>; + interrupts = <20>; + gpmc,num-cs = <8>; + gpmc,num-waitpins = <4>; + ti,hwmods = "gpmc"; + }; + mcbsp1: mcbsp@48074000 { compatible = "ti,omap2420-mcbsp"; reg = <0x48074000 0xff>; @@ -37,6 +96,9 @@ <60>; /* RX interrupt */ interrupt-names = "tx", "rx"; ti,hwmods = "mcbsp1"; + dmas = <&sdma 31>, + <&sdma 32>; + dma-names = "tx", "rx"; }; mcbsp2: mcbsp@48076000 { @@ -47,10 +109,13 @@ <63>; /* RX interrupt */ interrupt-names = "tx", "rx"; ti,hwmods = "mcbsp2"; + dmas = <&sdma 33>, + <&sdma 34>; + dma-names = "tx", "rx"; }; timer1: timer@48028000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap2420-timer"; reg = <0x48028000 0x400>; interrupts = <37>; ti,hwmods = "timer1"; diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi index c3924457c9b6..054bc4439568 100644 --- a/arch/arm/boot/dts/omap2430.dtsi +++ b/arch/arm/boot/dts/omap2430.dtsi @@ -29,6 +29,76 @@ pinctrl-single,function-mask = <0x3f>; }; + gpio1: gpio@4900c000 { + compatible = "ti,omap2-gpio"; + reg = <0x4900c000 0x200>; + interrupts = <29>; + ti,hwmods = "gpio1"; + ti,gpio-always-on; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio2: gpio@4900e000 { + compatible = "ti,omap2-gpio"; + reg = <0x4900e000 0x200>; + interrupts = <30>; + ti,hwmods = "gpio2"; + ti,gpio-always-on; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio3: gpio@49010000 { + compatible = "ti,omap2-gpio"; + reg = <0x49010000 0x200>; + interrupts = <31>; + ti,hwmods = "gpio3"; + ti,gpio-always-on; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio4: gpio@49012000 { + compatible = "ti,omap2-gpio"; + reg = <0x49012000 0x200>; + interrupts = <32>; + ti,hwmods = "gpio4"; + ti,gpio-always-on; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio5: gpio@480b6000 { + compatible = "ti,omap2-gpio"; + reg = <0x480b6000 0x200>; + interrupts = <33>; + ti,hwmods = "gpio5"; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpmc: gpmc@6e000000 { + compatible = "ti,omap2430-gpmc"; + reg = <0x6e000000 0x1000>; + #address-cells = <2>; + #size-cells = <1>; + interrupts = <20>; + gpmc,num-cs = <8>; + gpmc,num-waitpins = <4>; + ti,hwmods = "gpmc"; + }; + mcbsp1: mcbsp@48074000 { compatible = "ti,omap2430-mcbsp"; reg = <0x48074000 0xff>; @@ -40,6 +110,9 @@ interrupt-names = "common", "tx", "rx", "rx_overflow"; ti,buffer-size = <128>; ti,hwmods = "mcbsp1"; + dmas = <&sdma 31>, + <&sdma 32>; + dma-names = "tx", "rx"; }; mcbsp2: mcbsp@48076000 { @@ -52,6 +125,9 @@ interrupt-names = "common", "tx", "rx"; ti,buffer-size = <128>; ti,hwmods = "mcbsp2"; + dmas = <&sdma 33>, + <&sdma 34>; + dma-names = "tx", "rx"; }; mcbsp3: mcbsp@4808c000 { @@ -64,6 +140,9 @@ interrupt-names = "common", "tx", "rx"; ti,buffer-size = <128>; ti,hwmods = "mcbsp3"; + dmas = <&sdma 17>, + <&sdma 18>; + dma-names = "tx", "rx"; }; mcbsp4: mcbsp@4808e000 { @@ -76,6 +155,9 @@ interrupt-names = "common", "tx", "rx"; ti,buffer-size = <128>; ti,hwmods = "mcbsp4"; + dmas = <&sdma 19>, + <&sdma 20>; + dma-names = "tx", "rx"; }; mcbsp5: mcbsp@48096000 { @@ -88,10 +170,13 @@ interrupt-names = "common", "tx", "rx"; ti,buffer-size = <128>; ti,hwmods = "mcbsp5"; + dmas = <&sdma 21>, + <&sdma 22>; + dma-names = "tx", "rx"; }; timer1: timer@49018000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap2420-timer"; reg = <0x49018000 0x400>; interrupts = <37>; ti,hwmods = "timer1"; diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 3705a81c1fc2..5a31964ae339 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -13,6 +13,12 @@ model = "TI OMAP3 BeagleBoard xM"; compatible = "ti,omap3-beagle-xm, ti,omap3-beagle", "ti,omap3"; + cpus { + cpu@0 { + cpu0-supply = <&vcc>; + }; + }; + memory { device_type = "memory"; reg = <0x80000000 0x20000000>; /* 512 MB */ @@ -20,10 +26,6 @@ leds { compatible = "gpio-leds"; - pmu_stat { - label = "beagleboard::pmu_stat"; - gpios = <&twl_gpio 19 0>; /* LEDB */ - }; heartbeat { label = "beagleboard::usr0"; @@ -38,6 +40,16 @@ }; }; + pwmleds { + compatible = "pwm-leds"; + + pmu_stat { + label = "beagleboard::pmu_stat"; + pwms = <&twl_pwmled 1 7812500>; + max-brightness = <127>; + }; + }; + sound { compatible = "ti,omap-twl4030"; ti,model = "omap3beagle"; @@ -107,3 +119,9 @@ */ ti,pulldowns = <0x03a1c4>; }; + +&usb_otg_hs { + interface-type = <0>; + mode = <3>; + power = <50>; +}; diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index f624dc85d441..6eec69997607 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -7,12 +7,18 @@ */ /dts-v1/; -/include/ "omap3.dtsi" +/include/ "omap34xx.dtsi" / { model = "TI OMAP3 BeagleBoard"; compatible = "ti,omap3-beagle", "ti,omap3"; + cpus { + cpu@0 { + cpu0-supply = <&vcc>; + }; + }; + memory { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ @@ -38,6 +44,57 @@ }; }; + /* HS USB Port 2 RESET */ + hsusb2_reset: hsusb2_reset_reg { + compatible = "regulator-fixed"; + regulator-name = "hsusb2_reset"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio5 19 0>; /* gpio_147 */ + startup-delay-us = <70000>; + enable-active-high; + }; + + /* HS USB Port 2 Power */ + hsusb2_power: hsusb2_power_reg { + compatible = "regulator-fixed"; + regulator-name = "hsusb2_vbus"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&twl_gpio 18 0>; /* GPIO LEDA */ + startup-delay-us = <70000>; + }; + + /* HS USB Host PHY on PORT 2 */ + hsusb2_phy: hsusb2_phy { + compatible = "usb-nop-xceiv"; + reset-supply = <&hsusb2_reset>; + vcc-supply = <&hsusb2_power>; + }; +}; + +&omap3_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = < + &hsusbb2_pins + >; + + hsusbb2_pins: pinmux_hsusbb2_pins { + pinctrl-single,pins = < + 0x5c0 0x3 /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_clk OUTPUT */ + 0x5c2 0x3 /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_stp OUTPUT */ + 0x5c4 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dir INPUT | PULLDOWN */ + 0x5c6 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_nxt INPUT | PULLDOWN */ + 0x5c8 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat0 INPUT | PULLDOWN */ + 0x5cA 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat1 INPUT | PULLDOWN */ + 0x1a4 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat2 INPUT | PULLDOWN */ + 0x1a6 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat3 INPUT | PULLDOWN */ + 0x1a8 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat4 INPUT | PULLDOWN */ + 0x1aa 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat5 INPUT | PULLDOWN */ + 0x1ac 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat6 INPUT | PULLDOWN */ + 0x1ae 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat7 INPUT | PULLDOWN */ + >; + }; }; &i2c1 { @@ -65,3 +122,23 @@ &mmc3 { status = "disabled"; }; + +&usbhshost { + port2-mode = "ehci-phy"; +}; + +&usbhsehci { + phys = <0 &hsusb2_phy>; +}; + +&twl_gpio { + ti,use-leds; + /* pullups: BIT(1) */ + ti,pullups = <0x000002>; + /* + * pulldowns: + * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13) + * BIT(15), BIT(16), BIT(17) + */ + ti,pulldowns = <0x03a1c4>; +}; diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts b/arch/arm/boot/dts/omap3-devkit8000.dts new file mode 100644 index 000000000000..8a5cdcc6debd --- /dev/null +++ b/arch/arm/boot/dts/omap3-devkit8000.dts @@ -0,0 +1,169 @@ +/* + * Author: Anil Kumar <anilk4.v@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +/include/ "omap34xx.dtsi" +/ { + model = "TimLL OMAP3 Devkit8000"; + compatible = "timll,omap3-devkit8000", "ti,omap3"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; + + leds { + compatible = "gpio-leds"; + + heartbeat { + label = "devkit8000::led1"; + gpios = <&gpio6 26 0>; /* 186 -> LED1 */ + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + + mmc { + label = "devkit8000::led2"; + gpios = <&gpio6 3 0>; /* 163 -> LED2 */ + default-state = "on"; + linux,default-trigger = "none"; + }; + + usr { + label = "devkit8000::led3"; + gpios = <&gpio6 4 0>; /* 164 -> LED3 */ + default-state = "on"; + linux,default-trigger = "usr"; + }; + + }; + + sound { + compatible = "ti,omap-twl4030"; + ti,model = "devkit8000"; + + ti,mcbsp = <&mcbsp2>; + ti,codec = <&twl_audio>; + ti,audio-routing = + "Ext Spk", "PREDRIVEL", + "Ext Spk", "PREDRIVER", + "MAINMIC", "Main Mic", + "Main Mic", "Mic Bias 1"; + }; +}; + +&i2c1 { + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + + twl_audio: audio { + compatible = "ti,twl4030-audio"; + codec { + }; + }; + }; +}; + +&i2c2 { + status = "disabled"; +}; + +&i2c3 { + status = "disabled"; +}; + +/include/ "twl4030.dtsi" + +&mmc1 { + vmmc-supply = <&vmmc1>; + vmmc_aux-supply = <&vsim>; + bus-width = <8>; +}; + +&mmc2 { + status = "disabled"; +}; + +&mmc3 { + status = "disabled"; +}; + +&wdt2 { + status = "disabled"; +}; + +&mcbsp1 { + status = "disabled"; +}; + +&mcbsp3 { + status = "disabled"; +}; + +&mcbsp4 { + status = "disabled"; +}; + +&mcbsp5 { + status = "disabled"; +}; + +&gpmc { + ranges = <0 0 0x30000000 0x04>; /* CS0: NAND */ + + nand@0,0 { + reg = <0 0 0>; /* CS0, offset 0 */ + nand-bus-width = <16>; + + gpmc,sync-clk = <0>; + gpmc,cs-on = <0>; + gpmc,cs-rd-off = <44>; + gpmc,cs-wr-off = <44>; + gpmc,adv-on = <6>; + gpmc,adv-rd-off = <34>; + gpmc,adv-wr-off = <44>; + gpmc,we-off = <40>; + gpmc,oe-off = <54>; + gpmc,access = <64>; + gpmc,rd-cycle = <82>; + gpmc,wr-cycle = <82>; + gpmc,wr-access = <40>; + gpmc,wr-data-mux-bus = <0>; + + #address-cells = <1>; + #size-cells = <1>; + + x-loader@0 { + label = "X-Loader"; + reg = <0 0x80000>; + }; + + bootloaders@80000 { + label = "U-Boot"; + reg = <0x80000 0x1e0000>; + }; + + bootloaders_env@260000 { + label = "U-Boot Env"; + reg = <0x260000 0x20000>; + }; + + kernel@280000 { + label = "Kernel"; + reg = <0x280000 0x400000>; + }; + + filesystem@680000 { + label = "File System"; + reg = <0x680000 0xf980000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts index e8ba1c247a39..05f51e10ddd6 100644 --- a/arch/arm/boot/dts/omap3-evm.dts +++ b/arch/arm/boot/dts/omap3-evm.dts @@ -7,12 +7,18 @@ */ /dts-v1/; -/include/ "omap3.dtsi" +/include/ "omap34xx.dtsi" / { model = "TI OMAP3 EVM (OMAP3530, AM/DM37x)"; compatible = "ti,omap3-evm", "ti,omap3"; + cpus { + cpu@0 { + cpu0-supply = <&vcc>; + }; + }; + memory { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ @@ -59,3 +65,9 @@ &twl_gpio { ti,use-leds; }; + +&usb_otg_hs { + interface-type = <0>; + mode = <3>; + power = <50>; +}; diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi new file mode 100644 index 000000000000..f8fe3b748c3e --- /dev/null +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -0,0 +1,122 @@ +/* + * Device Tree Source for IGEP Technology devices + * + * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk> + * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +/include/ "omap34xx.dtsi" + +/ { + memory { + device_type = "memory"; + reg = <0x80000000 0x20000000>; /* 512 MB */ + }; + + sound { + compatible = "ti,omap-twl4030"; + ti,model = "igep2"; + ti,mcbsp = <&mcbsp2>; + ti,codec = <&twl_audio>; + }; +}; + +&omap3_pmx_core { + uart1_pins: pinmux_uart1_pins { + pinctrl-single,pins = < + 0x152 0x100 /* uart1_rx.uart1_rx INPUT | MODE0 */ + 0x14c 0 /* uart1_tx.uart1_tx OUTPUT | MODE0 */ + >; + }; + + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + 0x14a 0x100 /* uart2_rx.uart2_rx INPUT | MODE0 */ + 0x148 0 /* uart2_tx.uart2_tx OUTPUT | MODE0 */ + >; + }; + + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + 0x16e 0x100 /* uart3_rx.uart3_rx INPUT | MODE0 */ + 0x170 0 /* uart3_tx.uart3_tx OUTPUT | MODE0 */ + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + 0x114 0x0118 /* sdmmc1_clk.sdmmc1_clk INPUT PULLUP | MODE 0 */ + 0x116 0x0118 /* sdmmc1_cmd.sdmmc1_cmd INPUT PULLUP | MODE 0 */ + 0x118 0x0118 /* sdmmc1_dat0.sdmmc1_dat0 INPUT PULLUP | MODE 0 */ + 0x11a 0x0118 /* sdmmc1_dat1.sdmmc1_dat1 INPUT PULLUP | MODE 0 */ + 0x11c 0x0118 /* sdmmc1_dat2.sdmmc1_dat2 INPUT PULLUP | MODE 0 */ + 0x11e 0x0118 /* sdmmc1_dat3.sdmmc1_dat3 INPUT PULLUP | MODE 0 */ + 0x120 0x0100 /* sdmmc1_dat4.sdmmc1_dat4 INPUT | MODE 0 */ + 0x122 0x0100 /* sdmmc1_dat5.sdmmc1_dat5 INPUT | MODE 0 */ + 0x124 0x0100 /* sdmmc1_dat6.sdmmc1_dat6 INPUT | MODE 0 */ + 0x126 0x0100 /* sdmmc1_dat7.sdmmc1_dat7 INPUT | MODE 0 */ + >; + }; +}; + +&i2c1 { + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + + twl_audio: audio { + compatible = "ti,twl4030-audio"; + codec { + }; + }; + }; +}; + +/include/ "twl4030.dtsi" + +&i2c2 { + clock-frequency = <400000>; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <&vmmc1>; + vmmc_aux-supply = <&vsim>; + bus-width = <8>; +}; + +&mmc2 { + status = "disabled"; +}; + +&mmc3 { + status = "disabled"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; +}; + +&twl_gpio { + ti,use-leds; +}; diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts new file mode 100644 index 000000000000..e2b98490cc9a --- /dev/null +++ b/arch/arm/boot/dts/omap3-igep0020.dts @@ -0,0 +1,56 @@ +/* + * Device Tree Source for IGEPv2 board + * + * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk> + * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/include/ "omap3-igep.dtsi" + +/ { + model = "IGEPv2"; + compatible = "isee,omap3-igep0020", "ti,omap3"; + + leds { + compatible = "gpio-leds"; + boot { + label = "omap3:green:boot"; + gpios = <&gpio1 26 0>; + default-state = "on"; + }; + + user0 { + label = "omap3:red:user0"; + gpios = <&gpio1 27 0>; + default-state = "off"; + }; + + user1 { + label = "omap3:red:user1"; + gpios = <&gpio1 28 0>; + default-state = "off"; + }; + + user2 { + label = "omap3:green:user1"; + gpios = <&twl_gpio 19 1>; + }; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + + /* + * Display monitor features are burnt in the EEPROM + * as EDID data. + */ + eeprom@50 { + compatible = "ti,eeprom"; + reg = <0x50>; + }; +}; diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts new file mode 100644 index 000000000000..9dc48d262ffb --- /dev/null +++ b/arch/arm/boot/dts/omap3-igep0030.dts @@ -0,0 +1,44 @@ +/* + * Device Tree Source for IGEP COM Module + * + * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk> + * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/include/ "omap3-igep.dtsi" + +/ { + model = "IGEP COM Module"; + compatible = "isee,omap3-igep0030", "ti,omap3"; + + leds { + compatible = "gpio-leds"; + boot { + label = "omap3:green:boot"; + gpios = <&twl_gpio 13 1>; + default-state = "on"; + }; + + user0 { + label = "omap3:red:user0"; + gpios = <&twl_gpio 18 1>; /* LEDA */ + default-state = "off"; + }; + + user1 { + label = "omap3:green:user1"; + gpios = <&twl_gpio 19 1>; /* LEDB */ + default-state = "off"; + }; + + user2 { + label = "omap3:red:user1"; + gpios = <&gpio1 16 1>; + default-state = "off"; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap3-overo.dtsi b/arch/arm/boot/dts/omap3-overo.dtsi index 89808ce01673..d4a7280d18b7 100644 --- a/arch/arm/boot/dts/omap3-overo.dtsi +++ b/arch/arm/boot/dts/omap3-overo.dtsi @@ -11,17 +11,26 @@ */ /dts-v1/; -/include/ "omap3.dtsi" +/include/ "omap34xx.dtsi" / { - leds { - compatible = "gpio-leds"; + pwmleds { + compatible = "pwm-leds"; + overo { label = "overo:blue:COM"; - gpios = <&twl_gpio 19 0>; - linux,default-trigger = "mmc0"; + pwms = <&twl_pwmled 1 7812500>; + max-brightness = <127>; }; }; + + sound { + compatible = "ti,omap-twl4030"; + ti,model = "overo"; + + ti,mcbsp = <&mcbsp2>; + ti,codec = <&twl_audio>; + }; }; &i2c1 { @@ -31,6 +40,12 @@ reg = <0x48>; interrupts = <7>; /* SYS_NIRQ cascaded to intc */ interrupt-parent = <&intc>; + + twl_audio: audio { + compatible = "ti,twl4030-audio"; + codec { + }; + }; }; }; @@ -55,3 +70,9 @@ &twl_gpio { ti,use-leds; }; + +&usb_otg_hs { + interface-type = <0>; + mode = <3>; + power = <50>; +}; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 1acc26148ffc..4ad03d9dbf0c 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -26,8 +26,14 @@ }; }; + pmu { + compatible = "arm,cortex-a8-pmu"; + interrupts = <3>; + ti,hwmods = "debugss"; + }; + /* - * The soc node represents the soc top level view. It is uses for IPs + * The soc node represents the soc top level view. It is used for IPs * that are not memory mapped in the MPU view or for the MPU itself. */ soc { @@ -75,76 +81,101 @@ reg = <0x48200000 0x1000>; }; + sdma: dma-controller@48056000 { + compatible = "ti,omap3630-sdma", "ti,omap3430-sdma"; + reg = <0x48056000 0x1000>; + interrupts = <12>, + <13>, + <14>, + <15>; + #dma-cells = <1>; + #dma-channels = <32>; + #dma-requests = <96>; + }; + omap3_pmx_core: pinmux@48002030 { compatible = "ti,omap3-padconf", "pinctrl-single"; reg = <0x48002030 0x05cc>; #address-cells = <1>; #size-cells = <0>; pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0x7fff>; + pinctrl-single,function-mask = <0x7f1f>; }; - omap3_pmx_wkup: pinmux@0x48002a58 { + omap3_pmx_wkup: pinmux@0x48002a00 { compatible = "ti,omap3-padconf", "pinctrl-single"; - reg = <0x48002a58 0x5c>; + reg = <0x48002a00 0x5c>; #address-cells = <1>; #size-cells = <0>; pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0x7fff>; + pinctrl-single,function-mask = <0x7f1f>; }; gpio1: gpio@48310000 { compatible = "ti,omap3-gpio"; + reg = <0x48310000 0x200>; + interrupts = <29>; ti,hwmods = "gpio1"; + ti,gpio-always-on; gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio2: gpio@49050000 { compatible = "ti,omap3-gpio"; + reg = <0x49050000 0x200>; + interrupts = <30>; ti,hwmods = "gpio2"; gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio3: gpio@49052000 { compatible = "ti,omap3-gpio"; + reg = <0x49052000 0x200>; + interrupts = <31>; ti,hwmods = "gpio3"; gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio4: gpio@49054000 { compatible = "ti,omap3-gpio"; + reg = <0x49054000 0x200>; + interrupts = <32>; ti,hwmods = "gpio4"; gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio5: gpio@49056000 { compatible = "ti,omap3-gpio"; + reg = <0x49056000 0x200>; + interrupts = <33>; ti,hwmods = "gpio5"; gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio6: gpio@49058000 { compatible = "ti,omap3-gpio"; + reg = <0x49058000 0x200>; + interrupts = <34>; ti,hwmods = "gpio6"; gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; uart1: serial@4806a000 { @@ -192,6 +223,16 @@ #size-cells = <0>; ti,hwmods = "mcspi1"; ti,spi-num-cs = <4>; + dmas = <&sdma 35>, + <&sdma 36>, + <&sdma 37>, + <&sdma 38>, + <&sdma 39>, + <&sdma 40>, + <&sdma 41>, + <&sdma 42>; + dma-names = "tx0", "rx0", "tx1", "rx1", + "tx2", "rx2", "tx3", "rx3"; }; mcspi2: spi@4809a000 { @@ -200,6 +241,11 @@ #size-cells = <0>; ti,hwmods = "mcspi2"; ti,spi-num-cs = <2>; + dmas = <&sdma 43>, + <&sdma 44>, + <&sdma 45>, + <&sdma 46>; + dma-names = "tx0", "rx0", "tx1", "rx1"; }; mcspi3: spi@480b8000 { @@ -208,6 +254,11 @@ #size-cells = <0>; ti,hwmods = "mcspi3"; ti,spi-num-cs = <2>; + dmas = <&sdma 15>, + <&sdma 16>, + <&sdma 23>, + <&sdma 24>; + dma-names = "tx0", "rx0", "tx1", "rx1"; }; mcspi4: spi@480ba000 { @@ -216,22 +267,30 @@ #size-cells = <0>; ti,hwmods = "mcspi4"; ti,spi-num-cs = <1>; + dmas = <&sdma 70>, <&sdma 71>; + dma-names = "tx0", "rx0"; }; mmc1: mmc@4809c000 { compatible = "ti,omap3-hsmmc"; ti,hwmods = "mmc1"; ti,dual-volt; + dmas = <&sdma 61>, <&sdma 62>; + dma-names = "tx", "rx"; }; mmc2: mmc@480b4000 { compatible = "ti,omap3-hsmmc"; ti,hwmods = "mmc2"; + dmas = <&sdma 47>, <&sdma 48>; + dma-names = "tx", "rx"; }; mmc3: mmc@480ad000 { compatible = "ti,omap3-hsmmc"; ti,hwmods = "mmc3"; + dmas = <&sdma 77>, <&sdma 78>; + dma-names = "tx", "rx"; }; wdt2: wdt@48314000 { @@ -249,6 +308,9 @@ interrupt-names = "common", "tx", "rx"; ti,buffer-size = <128>; ti,hwmods = "mcbsp1"; + dmas = <&sdma 31>, + <&sdma 32>; + dma-names = "tx", "rx"; }; mcbsp2: mcbsp@49022000 { @@ -263,6 +325,9 @@ interrupt-names = "common", "tx", "rx", "sidetone"; ti,buffer-size = <1280>; ti,hwmods = "mcbsp2", "mcbsp2_sidetone"; + dmas = <&sdma 33>, + <&sdma 34>; + dma-names = "tx", "rx"; }; mcbsp3: mcbsp@49024000 { @@ -277,6 +342,9 @@ interrupt-names = "common", "tx", "rx", "sidetone"; ti,buffer-size = <128>; ti,hwmods = "mcbsp3", "mcbsp3_sidetone"; + dmas = <&sdma 17>, + <&sdma 18>; + dma-names = "tx", "rx"; }; mcbsp4: mcbsp@49026000 { @@ -289,6 +357,9 @@ interrupt-names = "common", "tx", "rx"; ti,buffer-size = <128>; ti,hwmods = "mcbsp4"; + dmas = <&sdma 19>, + <&sdma 20>; + dma-names = "tx", "rx"; }; mcbsp5: mcbsp@48096000 { @@ -301,10 +372,13 @@ interrupt-names = "common", "tx", "rx"; ti,buffer-size = <128>; ti,hwmods = "mcbsp5"; + dmas = <&sdma 21>, + <&sdma 22>; + dma-names = "tx", "rx"; }; timer1: timer@48318000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap3430-timer"; reg = <0x48318000 0x400>; interrupts = <37>; ti,hwmods = "timer1"; @@ -312,28 +386,28 @@ }; timer2: timer@49032000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap3430-timer"; reg = <0x49032000 0x400>; interrupts = <38>; ti,hwmods = "timer2"; }; timer3: timer@49034000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap3430-timer"; reg = <0x49034000 0x400>; interrupts = <39>; ti,hwmods = "timer3"; }; timer4: timer@49036000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap3430-timer"; reg = <0x49036000 0x400>; interrupts = <40>; ti,hwmods = "timer4"; }; timer5: timer@49038000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap3430-timer"; reg = <0x49038000 0x400>; interrupts = <41>; ti,hwmods = "timer5"; @@ -341,7 +415,7 @@ }; timer6: timer@4903a000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap3430-timer"; reg = <0x4903a000 0x400>; interrupts = <42>; ti,hwmods = "timer6"; @@ -349,7 +423,7 @@ }; timer7: timer@4903c000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap3430-timer"; reg = <0x4903c000 0x400>; interrupts = <43>; ti,hwmods = "timer7"; @@ -357,7 +431,7 @@ }; timer8: timer@4903e000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap3430-timer"; reg = <0x4903e000 0x400>; interrupts = <44>; ti,hwmods = "timer8"; @@ -366,7 +440,7 @@ }; timer9: timer@49040000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap3430-timer"; reg = <0x49040000 0x400>; interrupts = <45>; ti,hwmods = "timer9"; @@ -374,7 +448,7 @@ }; timer10: timer@48086000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap3430-timer"; reg = <0x48086000 0x400>; interrupts = <46>; ti,hwmods = "timer10"; @@ -382,7 +456,7 @@ }; timer11: timer@48088000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap3430-timer"; reg = <0x48088000 0x400>; interrupts = <47>; ti,hwmods = "timer11"; @@ -390,12 +464,65 @@ }; timer12: timer@48304000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap3430-timer"; reg = <0x48304000 0x400>; interrupts = <95>; ti,hwmods = "timer12"; ti,timer-alwon; ti,timer-secure; }; + + usbhstll: usbhstll@48062000 { + compatible = "ti,usbhs-tll"; + reg = <0x48062000 0x1000>; + interrupts = <78>; + ti,hwmods = "usb_tll_hs"; + }; + + usbhshost: usbhshost@48064000 { + compatible = "ti,usbhs-host"; + reg = <0x48064000 0x400>; + ti,hwmods = "usb_host_hs"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + usbhsohci: ohci@48064400 { + compatible = "ti,ohci-omap3", "usb-ohci"; + reg = <0x48064400 0x400>; + interrupt-parent = <&intc>; + interrupts = <76>; + }; + + usbhsehci: ehci@48064800 { + compatible = "ti,ehci-omap", "usb-ehci"; + reg = <0x48064800 0x400>; + interrupt-parent = <&intc>; + interrupts = <77>; + }; + }; + + gpmc: gpmc@6e000000 { + compatible = "ti,omap3430-gpmc"; + ti,hwmods = "gpmc"; + reg = <0x6e000000 0x02d0>; + interrupts = <20>; + gpmc,num-cs = <8>; + gpmc,num-waitpins = <4>; + #address-cells = <2>; + #size-cells = <1>; + }; + + usb_otg_hs: usb_otg_hs@480ab000 { + compatible = "ti,omap3-musb"; + reg = <0x480ab000 0x1000>; + interrupts = <0 92 0x4>, <0 93 0x4>; + interrupt-names = "mc", "dma"; + ti,hwmods = "usb_otg_hs"; + usb-phy = <&usb2_phy>; + multipoint = <1>; + num-eps = <16>; + ram-bits = <12>; + }; }; }; diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts new file mode 100644 index 000000000000..144ae43453c4 --- /dev/null +++ b/arch/arm/boot/dts/omap3430-sdp.dts @@ -0,0 +1,190 @@ +/* + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +/include/ "omap34xx.dtsi" + +/ { + model = "TI OMAP3430 SDP"; + compatible = "ti,omap3430-sdp", "ti,omap3"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; +}; + +&i2c1 { + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + }; +}; + +/include/ "twl4030.dtsi" + +&mmc1 { + vmmc-supply = <&vmmc1>; + vmmc_aux-supply = <&vsim>; + bus-width = <8>; +}; + +&mmc2 { + status = "disabled"; +}; + +&mmc3 { + status = "disabled"; +}; + +&gpmc { + ranges = <0 0 0x10000000 0x08000000>, + <1 0 0x28000000 0x08000000>, + <2 0 0x20000000 0x10000000>; + + nor@0,0 { + compatible = "cfi-flash"; + linux,mtd-name= "intel,pf48f6000m0y1be"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0 0 0x08000000>; + bank-width = <2>; + + gpmc,mux-add-data = <2>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <186>; + gpmc,cs-wr-off-ns = <186>; + gpmc,adv-on-ns = <12>; + gpmc,adv-rd-off-ns = <48>; + gpmc,adv-wr-off-ns = <48>; + gpmc,oe-on-ns = <54>; + gpmc,oe-off-ns = <168>; + gpmc,we-on-ns = <54>; + gpmc,we-off-ns = <168>; + gpmc,rd-cycle-ns = <186>; + gpmc,wr-cycle-ns = <186>; + gpmc,access-ns = <114>; + gpmc,page-burst-access-ns = <6>; + gpmc,bus-turnaround-ns = <12>; + gpmc,cycle2cycle-delay-ns = <18>; + gpmc,wr-data-mux-bus-ns = <90>; + gpmc,wr-access-ns = <186>; + gpmc,cycle2cycle-samecsen; + gpmc,cycle2cycle-diffcsen; + + partition@0 { + label = "bootloader-nor"; + reg = <0 0x40000>; + }; + partition@0x40000 { + label = "params-nor"; + reg = <0x40000 0x40000>; + }; + partition@0x80000 { + label = "kernel-nor"; + reg = <0x80000 0x200000>; + }; + partition@0x280000 { + label = "filesystem-nor"; + reg = <0x240000 0x7d80000>; + }; + }; + + nand@1,0 { + linux,mtd-name= "micron,mt29f1g08abb"; + #address-cells = <1>; + #size-cells = <1>; + reg = <1 0 0x08000000>; + nand-bus-width = <8>; + + ti,nand-ecc-opt = "sw"; + gpmc,device-nand; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <36>; + gpmc,cs-wr-off-ns = <36>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <24>; + gpmc,adv-wr-off-ns = <36>; + gpmc,oe-on-ns = <6>; + gpmc,oe-off-ns = <48>; + gpmc,we-on-ns = <6>; + gpmc,we-off-ns = <30>; + gpmc,rd-cycle-ns = <72>; + gpmc,wr-cycle-ns = <72>; + gpmc,access-ns = <54>; + gpmc,wr-access-ns = <30>; + + partition@0 { + label = "xloader-nand"; + reg = <0 0x80000>; + }; + partition@0x80000 { + label = "bootloader-nand"; + reg = <0x80000 0x140000>; + }; + partition@0x1c0000 { + label = "params-nand"; + reg = <0x1c0000 0xc0000>; + }; + partition@0x280000 { + label = "kernel-nand"; + reg = <0x280000 0x500000>; + }; + partition@0x780000 { + label = "filesystem-nand"; + reg = <0x780000 0x7880000>; + }; + }; + + onenand@2,0 { + linux,mtd-name= "samsung,kfm2g16q2m-deb8"; + #address-cells = <1>; + #size-cells = <1>; + reg = <2 0 0x10000000>; + + gpmc,device-width = <2>; + gpmc,mux-add-data = <2>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <84>; + gpmc,cs-wr-off-ns = <72>; + gpmc,adv-on-ns = <0>; + gpmc,adv-rd-off-ns = <18>; + gpmc,adv-wr-off-ns = <18>; + gpmc,oe-on-ns = <30>; + gpmc,oe-off-ns = <84>; + gpmc,we-on-ns = <0>; + gpmc,we-off-ns = <42>; + gpmc,rd-cycle-ns = <108>; + gpmc,wr-cycle-ns = <96>; + gpmc,access-ns = <78>; + gpmc,wr-data-mux-bus-ns = <30>; + + partition@0 { + label = "xloader-onenand"; + reg = <0 0x80000>; + }; + partition@0x80000 { + label = "bootloader-onenand"; + reg = <0x80000 0x40000>; + }; + partition@0xc0000 { + label = "params-onenand"; + reg = <0xc0000 0x20000>; + }; + partition@0xe0000 { + label = "kernel-onenand"; + reg = <0xe0000 0x200000>; + }; + partition@0x2e0000 { + label = "filesystem-onenand"; + reg = <0x2e0000 0xfd20000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi new file mode 100644 index 000000000000..75ed4ae2e631 --- /dev/null +++ b/arch/arm/boot/dts/omap34xx.dtsi @@ -0,0 +1,28 @@ +/* + * Device Tree Source for OMAP34xx/OMAP35xx SoC + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/include/ "omap3.dtsi" + +/ { + cpus { + cpu@0 { + /* OMAP343x/OMAP35xx variants OPP1-5 */ + operating-points = < + /* kHz uV */ + 125000 975000 + 250000 1075000 + 500000 1200000 + 550000 1270000 + 600000 1350000 + >; + clock-latency = <300000>; /* From legacy driver */ + }; + }; +}; diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi index 96bf0287cb9f..b89233e43b0f 100644 --- a/arch/arm/boot/dts/omap36xx.dtsi +++ b/arch/arm/boot/dts/omap36xx.dtsi @@ -15,6 +15,19 @@ serial3 = &uart4; }; + cpus { + /* OMAP3630/OMAP37xx 'standard device' variants OPP50 to OPP130 */ + cpu@0 { + operating-points = < + /* kHz uV */ + 300000 975000 + 600000 1075000 + 800000 1200000 + >; + clock-latency = <300000>; /* From legacy driver */ + }; + }; + ocp { uart4: serial@49042000 { compatible = "ti,omap3-uart"; diff --git a/arch/arm/boot/dts/omap4-panda-a4.dts b/arch/arm/boot/dts/omap4-panda-a4.dts index 75466d2abfb5..e30cdf0f5ac1 100644 --- a/arch/arm/boot/dts/omap4-panda-a4.dts +++ b/arch/arm/boot/dts/omap4-panda-a4.dts @@ -5,7 +5,10 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -/include/ "omap4-panda.dts" +/dts-v1/; + +/include/ "omap443x.dtsi" +/include/ "omap4-panda-common.dtsi" /* Pandaboard Rev A4+ have external pullups on SCL & SDA */ &dss_hdmi_pins { diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi new file mode 100644 index 000000000000..03bd60deb52b --- /dev/null +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -0,0 +1,251 @@ +/* + * Copyright (C) 2011-2013 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/include/ "elpida_ecb240abacn.dtsi" + +/ { + model = "TI OMAP4 PandaBoard"; + compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x40000000>; /* 1 GB */ + }; + + leds { + compatible = "gpio-leds"; + heartbeat { + label = "pandaboard::status1"; + gpios = <&gpio1 7 0>; + linux,default-trigger = "heartbeat"; + }; + + mmc { + label = "pandaboard::status2"; + gpios = <&gpio1 8 0>; + linux,default-trigger = "mmc0"; + }; + }; + + sound: sound { + compatible = "ti,abe-twl6040"; + ti,model = "PandaBoard"; + + ti,mclk-freq = <38400000>; + + ti,mcpdm = <&mcpdm>; + + ti,twl6040 = <&twl6040>; + + /* Audio routing */ + ti,audio-routing = + "Headset Stereophone", "HSOL", + "Headset Stereophone", "HSOR", + "Ext Spk", "HFL", + "Ext Spk", "HFR", + "Line Out", "AUXL", + "Line Out", "AUXR", + "HSMIC", "Headset Mic", + "Headset Mic", "Headset Mic Bias", + "AFML", "Line In", + "AFMR", "Line In"; + }; +}; + +&omap4_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = < + &twl6040_pins + &mcpdm_pins + &mcbsp1_pins + &dss_hdmi_pins + &tpd12s015_pins + >; + + twl6040_pins: pinmux_twl6040_pins { + pinctrl-single,pins = < + 0xe0 0x3 /* hdq_sio.gpio_127 OUTPUT | MODE3 */ + 0x160 0x100 /* sys_nirq2.sys_nirq2 INPUT | MODE0 */ + >; + }; + + mcpdm_pins: pinmux_mcpdm_pins { + pinctrl-single,pins = < + 0xc6 0x108 /* abe_pdm_ul_data.abe_pdm_ul_data INPUT PULLDOWN | MODE0 */ + 0xc8 0x108 /* abe_pdm_dl_data.abe_pdm_dl_data INPUT PULLDOWN | MODE0 */ + 0xca 0x118 /* abe_pdm_frame.abe_pdm_frame INPUT PULLUP | MODE0 */ + 0xcc 0x108 /* abe_pdm_lb_clk.abe_pdm_lb_clk INPUT PULLDOWN | MODE0 */ + 0xce 0x108 /* abe_clks.abe_clks INPUT PULLDOWN | MODE0 */ + >; + }; + + mcbsp1_pins: pinmux_mcbsp1_pins { + pinctrl-single,pins = < + 0xbe 0x100 /* abe_mcbsp1_clkx.abe_mcbsp1_clkx INPUT | MODE0 */ + 0xc0 0x108 /* abe_mcbsp1_dr.abe_mcbsp1_dr INPUT PULLDOWN | MODE0 */ + 0xc2 0x8 /* abe_mcbsp1_dx.abe_mcbsp1_dx OUTPUT PULLDOWN | MODE0 */ + 0xc4 0x100 /* abe_mcbsp1_fsx.abe_mcbsp1_fsx INPUT | MODE0 */ + >; + }; + + dss_hdmi_pins: pinmux_dss_hdmi_pins { + pinctrl-single,pins = < + 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */ + 0x5c 0x118 /* hdmi_scl.hdmi_scl INPUT PULLUP | MODE 0 */ + 0x5e 0x118 /* hdmi_sda.hdmi_sda INPUT PULLUP | MODE 0 */ + >; + }; + + tpd12s015_pins: pinmux_tpd12s015_pins { + pinctrl-single,pins = < + 0x22 0x3 /* gpmc_a17.gpio_41 OUTPUT | MODE3 */ + 0x48 0x3 /* gpmc_nbe1.gpio_60 OUTPUT | MODE3 */ + 0x58 0x10b /* hdmi_hpd.gpio_63 INPUT PULLDOWN | MODE3 */ + >; + }; + + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + 0xe2 0x118 /* i2c1_scl PULLUP | INPUTENABLE | MODE0 */ + 0xe4 0x118 /* i2c1_sda PULLUP | INPUTENABLE | MODE0 */ + >; + }; + + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + 0xe6 0x118 /* i2c2_scl PULLUP | INPUTENABLE | MODE0 */ + 0xe8 0x118 /* i2c2_sda PULLUP | INPUTENABLE | MODE0 */ + >; + }; + + i2c3_pins: pinmux_i2c3_pins { + pinctrl-single,pins = < + 0xea 0x118 /* i2c3_scl PULLUP | INPUTENABLE | MODE0 */ + 0xec 0x118 /* i2c3_sda PULLUP | INPUTENABLE | MODE0 */ + >; + }; + + i2c4_pins: pinmux_i2c4_pins { + pinctrl-single,pins = < + 0xee 0x118 /* i2c4_scl PULLUP | INPUTENABLE | MODE0 */ + 0xf0 0x118 /* i2c4_sda PULLUP | INPUTENABLE | MODE0 */ + >; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + + clock-frequency = <400000>; + + twl: twl@48 { + reg = <0x48>; + /* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */ + interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */ + interrupt-parent = <&gic>; + }; + + twl6040: twl@4b { + compatible = "ti,twl6040"; + reg = <0x4b>; + /* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */ + interrupts = <0 119 4>; /* IRQ_SYS_2N cascaded to gic */ + interrupt-parent = <&gic>; + ti,audpwron-gpio = <&gpio4 31 0>; /* gpio line 127 */ + + vio-supply = <&v1v8>; + v2v1-supply = <&v2v1>; + enable-active-high; + }; +}; + +/include/ "twl6030.dtsi" + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + + clock-frequency = <400000>; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; + + clock-frequency = <100000>; + + /* + * Display monitor features are burnt in their EEPROM as EDID data. + * The EEPROM is connected as I2C slave device. + */ + eeprom@50 { + compatible = "ti,eeprom"; + reg = <0x50>; + }; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins>; + + clock-frequency = <400000>; +}; + +&mmc1 { + vmmc-supply = <&vmmc>; + bus-width = <8>; +}; + +&mmc2 { + status = "disabled"; +}; + +&mmc3 { + status = "disabled"; +}; + +&mmc4 { + status = "disabled"; +}; + +&mmc5 { + ti,non-removable; + bus-width = <4>; +}; + +&emif1 { + cs1-used; + device-handle = <&elpida_ECB240ABACN>; +}; + +&emif2 { + cs1-used; + device-handle = <&elpida_ECB240ABACN>; +}; + +&mcbsp2 { + status = "disabled"; +}; + +&mcbsp3 { + status = "disabled"; +}; + +&dmic { + status = "disabled"; +}; + +&twl_usb_comparator { + usb-supply = <&vusb>; +}; + +&usb_otg_hs { + interface-type = <1>; + mode = <3>; + power = <50>; +}; diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts index 73bc1a67e444..f1d8c217ce12 100644 --- a/arch/arm/boot/dts/omap4-panda-es.dts +++ b/arch/arm/boot/dts/omap4-panda-es.dts @@ -5,7 +5,10 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -/include/ "omap4-panda.dts" +/dts-v1/; + +/include/ "omap4460.dtsi" +/include/ "omap4-panda-common.dtsi" /* Audio routing is differnet between PandaBoard4430 and PandaBoardES */ &sound { diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts index 4122efe31cfd..f8b221f0168e 100644 --- a/arch/arm/boot/dts/omap4-panda.dts +++ b/arch/arm/boot/dts/omap4-panda.dts @@ -7,202 +7,5 @@ */ /dts-v1/; -/include/ "omap4.dtsi" -/include/ "elpida_ecb240abacn.dtsi" - -/ { - model = "TI OMAP4 PandaBoard"; - compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4"; - - memory { - device_type = "memory"; - reg = <0x80000000 0x40000000>; /* 1 GB */ - }; - - leds { - compatible = "gpio-leds"; - heartbeat { - label = "pandaboard::status1"; - gpios = <&gpio1 7 0>; - linux,default-trigger = "heartbeat"; - }; - - mmc { - label = "pandaboard::status2"; - gpios = <&gpio1 8 0>; - linux,default-trigger = "mmc0"; - }; - }; - - sound: sound { - compatible = "ti,abe-twl6040"; - ti,model = "PandaBoard"; - - ti,mclk-freq = <38400000>; - - ti,mcpdm = <&mcpdm>; - - ti,twl6040 = <&twl6040>; - - /* Audio routing */ - ti,audio-routing = - "Headset Stereophone", "HSOL", - "Headset Stereophone", "HSOR", - "Ext Spk", "HFL", - "Ext Spk", "HFR", - "Line Out", "AUXL", - "Line Out", "AUXR", - "HSMIC", "Headset Mic", - "Headset Mic", "Headset Mic Bias", - "AFML", "Line In", - "AFMR", "Line In"; - }; -}; - -&omap4_pmx_core { - pinctrl-names = "default"; - pinctrl-0 = < - &twl6040_pins - &mcpdm_pins - &mcbsp1_pins - &dss_hdmi_pins - &tpd12s015_pins - >; - - twl6040_pins: pinmux_twl6040_pins { - pinctrl-single,pins = < - 0xe0 0x3 /* hdq_sio.gpio_127 OUTPUT | MODE3 */ - 0x160 0x100 /* sys_nirq2.sys_nirq2 INPUT | MODE0 */ - >; - }; - - mcpdm_pins: pinmux_mcpdm_pins { - pinctrl-single,pins = < - 0xc6 0x108 /* abe_pdm_ul_data.abe_pdm_ul_data INPUT PULLDOWN | MODE0 */ - 0xc8 0x108 /* abe_pdm_dl_data.abe_pdm_dl_data INPUT PULLDOWN | MODE0 */ - 0xca 0x118 /* abe_pdm_frame.abe_pdm_frame INPUT PULLUP | MODE0 */ - 0xcc 0x108 /* abe_pdm_lb_clk.abe_pdm_lb_clk INPUT PULLDOWN | MODE0 */ - 0xce 0x108 /* abe_clks.abe_clks INPUT PULLDOWN | MODE0 */ - >; - }; - - mcbsp1_pins: pinmux_mcbsp1_pins { - pinctrl-single,pins = < - 0xbe 0x100 /* abe_mcbsp1_clkx.abe_mcbsp1_clkx INPUT | MODE0 */ - 0xc0 0x108 /* abe_mcbsp1_dr.abe_mcbsp1_dr INPUT PULLDOWN | MODE0 */ - 0xc2 0x8 /* abe_mcbsp1_dx.abe_mcbsp1_dx OUTPUT PULLDOWN | MODE0 */ - 0xc4 0x100 /* abe_mcbsp1_fsx.abe_mcbsp1_fsx INPUT | MODE0 */ - >; - }; - - dss_hdmi_pins: pinmux_dss_hdmi_pins { - pinctrl-single,pins = < - 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */ - 0x5c 0x118 /* hdmi_scl.hdmi_scl INPUT PULLUP | MODE 0 */ - 0x5e 0x118 /* hdmi_sda.hdmi_sda INPUT PULLUP | MODE 0 */ - >; - }; - - tpd12s015_pins: pinmux_tpd12s015_pins { - pinctrl-single,pins = < - 0x22 0x3 /* gpmc_a17.gpio_41 OUTPUT | MODE3 */ - 0x48 0x3 /* gpmc_nbe1.gpio_60 OUTPUT | MODE3 */ - 0x58 0x10b /* hdmi_hpd.gpio_63 INPUT PULLDOWN | MODE3 */ - >; - }; -}; - -&i2c1 { - clock-frequency = <400000>; - - twl: twl@48 { - reg = <0x48>; - /* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */ - interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */ - interrupt-parent = <&gic>; - }; - - twl6040: twl@4b { - compatible = "ti,twl6040"; - reg = <0x4b>; - /* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */ - interrupts = <0 119 4>; /* IRQ_SYS_2N cascaded to gic */ - interrupt-parent = <&gic>; - ti,audpwron-gpio = <&gpio4 31 0>; /* gpio line 127 */ - - vio-supply = <&v1v8>; - v2v1-supply = <&v2v1>; - enable-active-high; - }; -}; - -/include/ "twl6030.dtsi" - -&i2c2 { - clock-frequency = <400000>; -}; - -&i2c3 { - clock-frequency = <100000>; - - /* - * Display monitor features are burnt in their EEPROM as EDID data. - * The EEPROM is connected as I2C slave device. - */ - eeprom@50 { - compatible = "ti,eeprom"; - reg = <0x50>; - }; -}; - -&i2c4 { - clock-frequency = <400000>; -}; - -&mmc1 { - vmmc-supply = <&vmmc>; - bus-width = <8>; -}; - -&mmc2 { - status = "disabled"; -}; - -&mmc3 { - status = "disabled"; -}; - -&mmc4 { - status = "disabled"; -}; - -&mmc5 { - ti,non-removable; - bus-width = <4>; -}; - -&emif1 { - cs1-used; - device-handle = <&elpida_ECB240ABACN>; -}; - -&emif2 { - cs1-used; - device-handle = <&elpida_ECB240ABACN>; -}; - -&mcbsp2 { - status = "disabled"; -}; - -&mcbsp3 { - status = "disabled"; -}; - -&dmic { - status = "disabled"; -}; - -&twl_usb_comparator { - usb-supply = <&vusb>; -}; +/include/ "omap443x.dtsi" +/include/ "omap4-panda-common.dtsi" diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 43e5258a9372..c387bdc1b1d1 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -7,7 +7,7 @@ */ /dts-v1/; -/include/ "omap4.dtsi" +/include/ "omap443x.dtsi" /include/ "elpida_ecb240abacn.dtsi" / { @@ -80,6 +80,32 @@ }; }; + pwmleds { + compatible = "pwm-leds"; + kpad { + label = "omap4::keypad"; + pwms = <&twl_pwm 0 7812500>; + max-brightness = <127>; + }; + + charging { + label = "omap4:green:chrg"; + pwms = <&twl_pwmled 0 7812500>; + max-brightness = <255>; + }; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&twl_pwm 1 7812500>; + brightness-levels = < + 0 10 20 30 40 + 50 60 70 80 90 + 100 110 120 127 + >; + default-brightness-level = <13>; + }; + sound { compatible = "ti,abe-twl6040"; ti,model = "SDP4430"; @@ -212,9 +238,40 @@ 0x58 0x10b /* hdmi_hpd.gpio_63 INPUT PULLDOWN | MODE3 */ >; }; + + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + 0xe2 0x118 /* i2c1_scl PULLUP | INPUTENABLE | MODE0 */ + 0xe4 0x118 /* i2c1_sda PULLUP | INPUTENABLE | MODE0 */ + >; + }; + + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + 0xe6 0x118 /* i2c2_scl PULLUP | INPUTENABLE | MODE0 */ + 0xe8 0x118 /* i2c2_sda PULLUP | INPUTENABLE | MODE0 */ + >; + }; + + i2c3_pins: pinmux_i2c3_pins { + pinctrl-single,pins = < + 0xea 0x118 /* i2c3_scl PULLUP | INPUTENABLE | MODE0 */ + 0xec 0x118 /* i2c3_sda PULLUP | INPUTENABLE | MODE0 */ + >; + }; + + i2c4_pins: pinmux_i2c4_pins { + pinctrl-single,pins = < + 0xee 0x118 /* i2c4_scl PULLUP | INPUTENABLE | MODE0 */ + 0xf0 0x118 /* i2c4_sda PULLUP | INPUTENABLE | MODE0 */ + >; + }; }; &i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + clock-frequency = <400000>; twl: twl@48 { @@ -253,10 +310,16 @@ /include/ "twl6030.dtsi" &i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + clock-frequency = <400000>; }; &i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; + clock-frequency = <400000>; /* @@ -279,6 +342,9 @@ }; &i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins>; + clock-frequency = <400000>; /* @@ -428,3 +494,9 @@ &twl_usb_comparator { usb-supply = <&vusb>; }; + +&usb_otg_hs { + interface-type = <1>; + mode = <3>; + power = <50>; +}; diff --git a/arch/arm/boot/dts/omap4-var-som.dts b/arch/arm/boot/dts/omap4-var-som.dts index 6601e6af6092..222a413c2c51 100644 --- a/arch/arm/boot/dts/omap4-var-som.dts +++ b/arch/arm/boot/dts/omap4-var-som.dts @@ -7,7 +7,7 @@ */ /dts-v1/; -/include/ "omap4.dtsi" +/include/ "omap443x.dtsi" / { model = "Variscite OMAP4 SOM"; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 739bb79e410e..2a5642882c8a 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -94,6 +94,11 @@ #size-cells = <1>; ranges; ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3"; + reg = <0x44000000 0x1000>, + <0x44800000 0x2000>, + <0x45000000 0x1000>; + interrupts = <0 9 0x4>, + <0 10 0x4>; counter32k: counter@4a304000 { compatible = "ti,omap-counter32k"; @@ -118,15 +123,28 @@ pinctrl-single,function-mask = <0x7fff>; }; + sdma: dma-controller@4a056000 { + compatible = "ti,omap4430-sdma"; + reg = <0x4a056000 0x1000>; + interrupts = <0 12 0x4>, + <0 13 0x4>, + <0 14 0x4>, + <0 15 0x4>; + #dma-cells = <1>; + #dma-channels = <32>; + #dma-requests = <127>; + }; + gpio1: gpio@4a310000 { compatible = "ti,omap4-gpio"; reg = <0x4a310000 0x200>; interrupts = <0 29 0x4>; ti,hwmods = "gpio1"; + ti,gpio-always-on; gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio2: gpio@48055000 { @@ -137,7 +155,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio3: gpio@48057000 { @@ -148,7 +166,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio4: gpio@48059000 { @@ -159,7 +177,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio5: gpio@4805b000 { @@ -170,7 +188,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio6: gpio@4805d000 { @@ -181,7 +199,18 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; + }; + + gpmc: gpmc@50000000 { + compatible = "ti,omap4430-gpmc"; + reg = <0x50000000 0x1000>; + #address-cells = <2>; + #size-cells = <1>; + interrupts = <0 20 0x4>; + gpmc,num-cs = <8>; + gpmc,num-waitpins = <4>; + ti,hwmods = "gpmc"; }; uart1: serial@4806a000 { @@ -260,6 +289,16 @@ #size-cells = <0>; ti,hwmods = "mcspi1"; ti,spi-num-cs = <4>; + dmas = <&sdma 35>, + <&sdma 36>, + <&sdma 37>, + <&sdma 38>, + <&sdma 39>, + <&sdma 40>, + <&sdma 41>, + <&sdma 42>; + dma-names = "tx0", "rx0", "tx1", "rx1", + "tx2", "rx2", "tx3", "rx3"; }; mcspi2: spi@4809a000 { @@ -270,6 +309,11 @@ #size-cells = <0>; ti,hwmods = "mcspi2"; ti,spi-num-cs = <2>; + dmas = <&sdma 43>, + <&sdma 44>, + <&sdma 45>, + <&sdma 46>; + dma-names = "tx0", "rx0", "tx1", "rx1"; }; mcspi3: spi@480b8000 { @@ -280,6 +324,8 @@ #size-cells = <0>; ti,hwmods = "mcspi3"; ti,spi-num-cs = <2>; + dmas = <&sdma 15>, <&sdma 16>; + dma-names = "tx0", "rx0"; }; mcspi4: spi@480ba000 { @@ -290,6 +336,8 @@ #size-cells = <0>; ti,hwmods = "mcspi4"; ti,spi-num-cs = <1>; + dmas = <&sdma 70>, <&sdma 71>; + dma-names = "tx0", "rx0"; }; mmc1: mmc@4809c000 { @@ -299,6 +347,8 @@ ti,hwmods = "mmc1"; ti,dual-volt; ti,needs-special-reset; + dmas = <&sdma 61>, <&sdma 62>; + dma-names = "tx", "rx"; }; mmc2: mmc@480b4000 { @@ -307,6 +357,8 @@ interrupts = <0 86 0x4>; ti,hwmods = "mmc2"; ti,needs-special-reset; + dmas = <&sdma 47>, <&sdma 48>; + dma-names = "tx", "rx"; }; mmc3: mmc@480ad000 { @@ -315,6 +367,8 @@ interrupts = <0 94 0x4>; ti,hwmods = "mmc3"; ti,needs-special-reset; + dmas = <&sdma 77>, <&sdma 78>; + dma-names = "tx", "rx"; }; mmc4: mmc@480d1000 { @@ -323,6 +377,8 @@ interrupts = <0 96 0x4>; ti,hwmods = "mmc4"; ti,needs-special-reset; + dmas = <&sdma 57>, <&sdma 58>; + dma-names = "tx", "rx"; }; mmc5: mmc@480d5000 { @@ -331,6 +387,8 @@ interrupts = <0 59 0x4>; ti,hwmods = "mmc5"; ti,needs-special-reset; + dmas = <&sdma 59>, <&sdma 60>; + dma-names = "tx", "rx"; }; wdt2: wdt@4a314000 { @@ -347,6 +405,9 @@ reg-names = "mpu", "dma"; interrupts = <0 112 0x4>; ti,hwmods = "mcpdm"; + dmas = <&sdma 65>, + <&sdma 66>; + dma-names = "up_link", "dn_link"; }; dmic: dmic@4012e000 { @@ -356,6 +417,8 @@ reg-names = "mpu", "dma"; interrupts = <0 114 0x4>; ti,hwmods = "dmic"; + dmas = <&sdma 67>; + dma-names = "up_link"; }; mcbsp1: mcbsp@40122000 { @@ -367,6 +430,9 @@ interrupt-names = "common"; ti,buffer-size = <128>; ti,hwmods = "mcbsp1"; + dmas = <&sdma 33>, + <&sdma 34>; + dma-names = "tx", "rx"; }; mcbsp2: mcbsp@40124000 { @@ -378,6 +444,9 @@ interrupt-names = "common"; ti,buffer-size = <128>; ti,hwmods = "mcbsp2"; + dmas = <&sdma 17>, + <&sdma 18>; + dma-names = "tx", "rx"; }; mcbsp3: mcbsp@40126000 { @@ -389,6 +458,9 @@ interrupt-names = "common"; ti,buffer-size = <128>; ti,hwmods = "mcbsp3"; + dmas = <&sdma 19>, + <&sdma 20>; + dma-names = "tx", "rx"; }; mcbsp4: mcbsp@48096000 { @@ -399,6 +471,9 @@ interrupt-names = "common"; ti,buffer-size = <128>; ti,hwmods = "mcbsp4"; + dmas = <&sdma 31>, + <&sdma 32>; + dma-names = "tx", "rx"; }; keypad: keypad@4a31c000 { @@ -438,10 +513,15 @@ #size-cells = <1>; ranges; ti,hwmods = "ocp2scp_usb_phy"; + usb2_phy: usb2phy@4a0ad080 { + compatible = "ti,omap-usb2"; + reg = <0x4a0ad080 0x58>; + ctrl-module = <&omap_control_usb>; + }; }; timer1: timer@4a318000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap3430-timer"; reg = <0x4a318000 0x80>; interrupts = <0 37 0x4>; ti,hwmods = "timer1"; @@ -449,28 +529,28 @@ }; timer2: timer@48032000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap3430-timer"; reg = <0x48032000 0x80>; interrupts = <0 38 0x4>; ti,hwmods = "timer2"; }; timer3: timer@48034000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap4430-timer"; reg = <0x48034000 0x80>; interrupts = <0 39 0x4>; ti,hwmods = "timer3"; }; timer4: timer@48036000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap4430-timer"; reg = <0x48036000 0x80>; interrupts = <0 40 0x4>; ti,hwmods = "timer4"; }; timer5: timer@40138000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap4430-timer"; reg = <0x40138000 0x80>, <0x49038000 0x80>; interrupts = <0 41 0x4>; @@ -479,7 +559,7 @@ }; timer6: timer@4013a000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap4430-timer"; reg = <0x4013a000 0x80>, <0x4903a000 0x80>; interrupts = <0 42 0x4>; @@ -488,7 +568,7 @@ }; timer7: timer@4013c000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap4430-timer"; reg = <0x4013c000 0x80>, <0x4903c000 0x80>; interrupts = <0 43 0x4>; @@ -497,7 +577,7 @@ }; timer8: timer@4013e000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap4430-timer"; reg = <0x4013e000 0x80>, <0x4903e000 0x80>; interrupts = <0 44 0x4>; @@ -507,7 +587,7 @@ }; timer9: timer@4803e000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap4430-timer"; reg = <0x4803e000 0x80>; interrupts = <0 45 0x4>; ti,hwmods = "timer9"; @@ -515,7 +595,7 @@ }; timer10: timer@48086000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap3430-timer"; reg = <0x48086000 0x80>; interrupts = <0 46 0x4>; ti,hwmods = "timer10"; @@ -523,11 +603,62 @@ }; timer11: timer@48088000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap4430-timer"; reg = <0x48088000 0x80>; interrupts = <0 47 0x4>; ti,hwmods = "timer11"; ti,timer-pwm; }; + + usbhstll: usbhstll@4a062000 { + compatible = "ti,usbhs-tll"; + reg = <0x4a062000 0x1000>; + interrupts = <0 78 0x4>; + ti,hwmods = "usb_tll_hs"; + }; + + usbhshost: usbhshost@4a064000 { + compatible = "ti,usbhs-host"; + reg = <0x4a064000 0x800>; + ti,hwmods = "usb_host_hs"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + usbhsohci: ohci@4a064800 { + compatible = "ti,ohci-omap3", "usb-ohci"; + reg = <0x4a064800 0x400>; + interrupt-parent = <&gic>; + interrupts = <0 76 0x4>; + }; + + usbhsehci: ehci@4a064c00 { + compatible = "ti,ehci-omap", "usb-ehci"; + reg = <0x4a064c00 0x400>; + interrupt-parent = <&gic>; + interrupts = <0 77 0x4>; + }; + }; + + omap_control_usb: omap-control-usb@4a002300 { + compatible = "ti,omap-control-usb"; + reg = <0x4a002300 0x4>, + <0x4a00233c 0x4>; + reg-names = "control_dev_conf", "otghs_control"; + ti,type = <1>; + }; + + usb_otg_hs: usb_otg_hs@4a0ab000 { + compatible = "ti,omap4-musb"; + reg = <0x4a0ab000 0x7ff>; + interrupts = <0 92 0x4>, <0 93 0x4>; + interrupt-names = "mc", "dma"; + ti,hwmods = "usb_otg_hs"; + usb-phy = <&usb2_phy>; + multipoint = <1>; + num-eps = <16>; + ram-bits = <12>; + ti,has-mailbox; + }; }; }; diff --git a/arch/arm/boot/dts/omap443x.dtsi b/arch/arm/boot/dts/omap443x.dtsi new file mode 100644 index 000000000000..cccf39af4925 --- /dev/null +++ b/arch/arm/boot/dts/omap443x.dtsi @@ -0,0 +1,27 @@ +/* + * Device Tree Source for OMAP443x SoC + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/include/ "omap4.dtsi" + +/ { + cpus { + cpu@0 { + /* OMAP443x variants OPP50-OPPNT */ + operating-points = < + /* kHz uV */ + 300000 1025000 + 600000 1200000 + 800000 1313000 + 1008000 1375000 + >; + clock-latency = <300000>; /* From legacy driver */ + }; + }; +}; diff --git a/arch/arm/boot/dts/omap4460.dtsi b/arch/arm/boot/dts/omap4460.dtsi new file mode 100644 index 000000000000..7c2c23cc17ef --- /dev/null +++ b/arch/arm/boot/dts/omap4460.dtsi @@ -0,0 +1,32 @@ +/* + * Device Tree Source for OMAP4460 SoC + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ +/include/ "omap4.dtsi" + +/ { + cpus { + /* OMAP446x 'standard device' variants OPP50 to OPPTurbo */ + cpu@0 { + operating-points = < + /* kHz uV */ + 350000 975000 + 700000 1075000 + 920000 1200000 + >; + clock-latency = <300000>; /* From legacy driver */ + }; + }; + + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = <0 54 0x4>, + <0 55 0x4>; + ti,hwmods = "debugss"; + }; +}; diff --git a/arch/arm/boot/dts/omap5-evm.dts b/arch/arm/boot/dts/omap5-evm.dts index 8722c15bbba2..982acd19477d 100644 --- a/arch/arm/boot/dts/omap5-evm.dts +++ b/arch/arm/boot/dts/omap5-evm.dts @@ -16,7 +16,7 @@ memory { device_type = "memory"; - reg = <0x80000000 0x80000000>; /* 2 GB */ + reg = <0x80000000 0x7F000000>; /* 2032 MB */ }; vmmcsd_fixed: fixedregulator-mmcsd { @@ -80,6 +80,68 @@ 0x15a 0x100 /* abemcbsp2_clkx.abemcbsp2_clkx INPUT | MODE0 */ >; }; + + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + 0x1b2 0x118 /* i2c1_scl PULLUP | INPUTENABLE | MODE0 */ + 0x1b4 0x118 /* i2c1_sda PULLUP | INPUTENABLE | MODE0 */ + >; + }; + + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + 0x178 0x100 /* i2c2_scl INPUTENABLE | MODE0 */ + 0x17a 0x100 /* i2c2_sda INPUTENABLE | MODE0 */ + >; + }; + + i2c3_pins: pinmux_i2c3_pins { + pinctrl-single,pins = < + 0x13a 0x100 /* i2c3_scl INPUTENABLE | MODE0 */ + 0x13c 0x100 /* i2c3_sda INPUTENABLE | MODE0 */ + >; + }; + + i2c4_pins: pinmux_i2c4_pins { + pinctrl-single,pins = < + 0xb8 0x100 /* i2c4_scl INPUTENABLE | MODE0 */ + 0xba 0x100 /* i2c4_sda INPUTENABLE | MODE0 */ + >; + }; + + i2c5_pins: pinmux_i2c5_pins { + pinctrl-single,pins = < + 0x184 0x100 /* i2c5_scl INPUTENABLE | MODE0 */ + 0x186 0x100 /* i2c5_sda INPUTENABLE | MODE0 */ + >; + }; + + mcspi2_pins: pinmux_mcspi2_pins { + pinctrl-single,pins = < + 0xbc 0x100 /* MCSPI2_CLK INPUTENABLE | MODE0 */ + 0xbe 0x100 /* MCSPI2_SIMO INPUTENABLE | MODE0 */ + 0xc0 0x118 /* MCSPI2_SOMI PULLUP | INPUTENABLE | MODE0*/ + 0xc2 0x0 /* MCSPI2_CS MODE0*/ + >; + }; + + mcspi3_pins: pinmux_mcspi3_pins { + pinctrl-single,pins = < + 0x78 0x101 /* MCSPI2_SOMI INPUTENABLE | MODE1 */ + 0x7a 0x101 /* MCSPI2_CS INPUTENABLE | MODE1 */ + 0x7c 0x101 /* MCSPI2_SIMO INPUTENABLE | MODE1 */ + 0x7e 0x101 /* MCSPI2_CLK INPUTENABLE | MODE1 */ + >; + }; + + mcspi4_pins: pinmux_mcspi4_pins { + pinctrl-single,pins = < + 0x164 0x101 /* MCSPI2_CLK INPUTENABLE | MODE1 */ + 0x168 0x101 /* MCSPI2_SIMO INPUTENABLE | MODE1 */ + 0x16a 0x101 /* MCSPI2_SOMI INPUTENABLE | MODE1 */ + 0x16c 0x101 /* MCSPI2_CS INPUTENABLE | MODE1 */ + >; + }; }; &mmc1 { @@ -106,7 +168,17 @@ status = "disabled"; }; +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + + clock-frequency = <400000>; +}; + &i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + clock-frequency = <400000>; /* Pressure Sensor */ @@ -116,7 +188,17 @@ }; }; +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; + + clock-frequency = <400000>; +}; + &i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins>; + clock-frequency = <400000>; /* Temperature Sensor */ @@ -126,6 +208,13 @@ }; }; +&i2c5 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_pins>; + + clock-frequency = <400000>; +}; + &keypad { keypad,num-rows = <8>; keypad,num-columns = <8>; @@ -151,3 +240,22 @@ cs1-used; device-handle = <&samsung_K3PE0E000B>; }; + +&mcspi1 { + +}; + +&mcspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&mcspi2_pins>; +}; + +&mcspi3 { + pinctrl-names = "default"; + pinctrl-0 = <&mcspi3_pins>; +}; + +&mcspi4 { + pinctrl-names = "default"; + pinctrl-0 = <&mcspi4_pins>; +}; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 790bb2a4b343..3dd7ff825828 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -18,6 +18,9 @@ /include/ "skeleton.dtsi" / { + #address-cells = <1>; + #size-cells = <1>; + compatible = "ti,omap5"; interrupt-parent = <&gic>; @@ -33,24 +36,32 @@ cpus { cpu@0 { compatible = "arm,cortex-a15"; - timer { - compatible = "arm,armv7-timer"; - /* 14th PPI IRQ, active low level-sensitive */ - interrupts = <1 14 0x308>; - clock-frequency = <6144000>; - }; }; cpu@1 { compatible = "arm,cortex-a15"; - timer { - compatible = "arm,armv7-timer"; - /* 14th PPI IRQ, active low level-sensitive */ - interrupts = <1 14 0x308>; - clock-frequency = <6144000>; - }; }; }; + timer { + compatible = "arm,armv7-timer"; + /* PPI secure/nonsecure IRQ, active low level-sensitive */ + interrupts = <1 13 0x308>, + <1 14 0x308>, + <1 11 0x308>, + <1 10 0x308>; + clock-frequency = <6144000>; + }; + + gic: interrupt-controller@48211000 { + compatible = "arm,cortex-a15-gic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x48211000 0x1000>, + <0x48212000 0x1000>, + <0x48214000 0x2000>, + <0x48216000 0x2000>; + }; + /* * The soc node represents the soc top level view. It is uses for IPs * that are not memory mapped in the MPU view or for the MPU itself. @@ -76,6 +87,11 @@ #size-cells = <1>; ranges; ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3"; + reg = <0x44000000 0x2000>, + <0x44800000 0x3000>, + <0x45000000 0x4000>; + interrupts = <0 9 0x4>, + <0 10 0x4>; counter32k: counter@4ae04000 { compatible = "ti,omap-counter32k"; @@ -100,12 +116,16 @@ pinctrl-single,function-mask = <0x7fff>; }; - gic: interrupt-controller@48211000 { - compatible = "arm,cortex-a15-gic"; - interrupt-controller; - #interrupt-cells = <3>; - reg = <0x48211000 0x1000>, - <0x48212000 0x1000>; + sdma: dma-controller@4a056000 { + compatible = "ti,omap4430-sdma"; + reg = <0x4a056000 0x1000>; + interrupts = <0 12 0x4>, + <0 13 0x4>, + <0 14 0x4>, + <0 15 0x4>; + #dma-cells = <1>; + #dma-channels = <32>; + #dma-requests = <127>; }; gpio1: gpio@4ae10000 { @@ -113,10 +133,11 @@ reg = <0x4ae10000 0x200>; interrupts = <0 29 0x4>; ti,hwmods = "gpio1"; + ti,gpio-always-on; gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio2: gpio@48055000 { @@ -127,7 +148,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio3: gpio@48057000 { @@ -138,7 +159,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio4: gpio@48059000 { @@ -149,7 +170,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio5: gpio@4805b000 { @@ -160,7 +181,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio6: gpio@4805d000 { @@ -171,7 +192,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio7: gpio@48051000 { @@ -182,7 +203,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio8: gpio@48053000 { @@ -193,7 +214,18 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; + }; + + gpmc: gpmc@50000000 { + compatible = "ti,omap4430-gpmc"; + reg = <0x50000000 0x1000>; + #address-cells = <2>; + #size-cells = <1>; + interrupts = <0 20 0x4>; + gpmc,num-cs = <8>; + gpmc,num-waitpins = <4>; + ti,hwmods = "gpmc"; }; i2c1: i2c@48070000 { @@ -241,6 +273,65 @@ ti,hwmods = "i2c5"; }; + mcspi1: spi@48098000 { + compatible = "ti,omap4-mcspi"; + reg = <0x48098000 0x200>; + interrupts = <0 65 0x4>; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "mcspi1"; + ti,spi-num-cs = <4>; + dmas = <&sdma 35>, + <&sdma 36>, + <&sdma 37>, + <&sdma 38>, + <&sdma 39>, + <&sdma 40>, + <&sdma 41>, + <&sdma 42>; + dma-names = "tx0", "rx0", "tx1", "rx1", + "tx2", "rx2", "tx3", "rx3"; + }; + + mcspi2: spi@4809a000 { + compatible = "ti,omap4-mcspi"; + reg = <0x4809a000 0x200>; + interrupts = <0 66 0x4>; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "mcspi2"; + ti,spi-num-cs = <2>; + dmas = <&sdma 43>, + <&sdma 44>, + <&sdma 45>, + <&sdma 46>; + dma-names = "tx0", "rx0", "tx1", "rx1"; + }; + + mcspi3: spi@480b8000 { + compatible = "ti,omap4-mcspi"; + reg = <0x480b8000 0x200>; + interrupts = <0 91 0x4>; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "mcspi3"; + ti,spi-num-cs = <2>; + dmas = <&sdma 15>, <&sdma 16>; + dma-names = "tx0", "rx0"; + }; + + mcspi4: spi@480ba000 { + compatible = "ti,omap4-mcspi"; + reg = <0x480ba000 0x200>; + interrupts = <0 48 0x4>; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "mcspi4"; + ti,spi-num-cs = <1>; + dmas = <&sdma 70>, <&sdma 71>; + dma-names = "tx0", "rx0"; + }; + uart1: serial@4806a000 { compatible = "ti,omap4-uart"; reg = <0x4806a000 0x100>; @@ -296,6 +387,8 @@ ti,hwmods = "mmc1"; ti,dual-volt; ti,needs-special-reset; + dmas = <&sdma 61>, <&sdma 62>; + dma-names = "tx", "rx"; }; mmc2: mmc@480b4000 { @@ -304,6 +397,8 @@ interrupts = <0 86 0x4>; ti,hwmods = "mmc2"; ti,needs-special-reset; + dmas = <&sdma 47>, <&sdma 48>; + dma-names = "tx", "rx"; }; mmc3: mmc@480ad000 { @@ -312,6 +407,8 @@ interrupts = <0 94 0x4>; ti,hwmods = "mmc3"; ti,needs-special-reset; + dmas = <&sdma 77>, <&sdma 78>; + dma-names = "tx", "rx"; }; mmc4: mmc@480d1000 { @@ -320,6 +417,8 @@ interrupts = <0 96 0x4>; ti,hwmods = "mmc4"; ti,needs-special-reset; + dmas = <&sdma 57>, <&sdma 58>; + dma-names = "tx", "rx"; }; mmc5: mmc@480d5000 { @@ -328,10 +427,13 @@ interrupts = <0 59 0x4>; ti,hwmods = "mmc5"; ti,needs-special-reset; + dmas = <&sdma 59>, <&sdma 60>; + dma-names = "tx", "rx"; }; keypad: keypad@4ae1c000 { compatible = "ti,omap4-keypad"; + reg = <0x4ae1c000 0x400>; ti,hwmods = "kbd"; }; @@ -342,6 +444,9 @@ reg-names = "mpu", "dma"; interrupts = <0 112 0x4>; ti,hwmods = "mcpdm"; + dmas = <&sdma 65>, + <&sdma 66>; + dma-names = "up_link", "dn_link"; }; dmic: dmic@4012e000 { @@ -351,6 +456,8 @@ reg-names = "mpu", "dma"; interrupts = <0 114 0x4>; ti,hwmods = "dmic"; + dmas = <&sdma 67>; + dma-names = "up_link"; }; mcbsp1: mcbsp@40122000 { @@ -362,6 +469,9 @@ interrupt-names = "common"; ti,buffer-size = <128>; ti,hwmods = "mcbsp1"; + dmas = <&sdma 33>, + <&sdma 34>; + dma-names = "tx", "rx"; }; mcbsp2: mcbsp@40124000 { @@ -373,6 +483,9 @@ interrupt-names = "common"; ti,buffer-size = <128>; ti,hwmods = "mcbsp2"; + dmas = <&sdma 17>, + <&sdma 18>; + dma-names = "tx", "rx"; }; mcbsp3: mcbsp@40126000 { @@ -384,10 +497,13 @@ interrupt-names = "common"; ti,buffer-size = <128>; ti,hwmods = "mcbsp3"; + dmas = <&sdma 19>, + <&sdma 20>; + dma-names = "tx", "rx"; }; timer1: timer@4ae18000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap5430-timer"; reg = <0x4ae18000 0x80>; interrupts = <0 37 0x4>; ti,hwmods = "timer1"; @@ -395,28 +511,28 @@ }; timer2: timer@48032000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap5430-timer"; reg = <0x48032000 0x80>; interrupts = <0 38 0x4>; ti,hwmods = "timer2"; }; timer3: timer@48034000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap5430-timer"; reg = <0x48034000 0x80>; interrupts = <0 39 0x4>; ti,hwmods = "timer3"; }; timer4: timer@48036000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap5430-timer"; reg = <0x48036000 0x80>; interrupts = <0 40 0x4>; ti,hwmods = "timer4"; }; timer5: timer@40138000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap5430-timer"; reg = <0x40138000 0x80>, <0x49038000 0x80>; interrupts = <0 41 0x4>; @@ -425,7 +541,7 @@ }; timer6: timer@4013a000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap5430-timer"; reg = <0x4013a000 0x80>, <0x4903a000 0x80>; interrupts = <0 42 0x4>; @@ -435,7 +551,7 @@ }; timer7: timer@4013c000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap5430-timer"; reg = <0x4013c000 0x80>, <0x4903c000 0x80>; interrupts = <0 43 0x4>; @@ -444,7 +560,7 @@ }; timer8: timer@4013e000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap5430-timer"; reg = <0x4013e000 0x80>, <0x4903e000 0x80>; interrupts = <0 44 0x4>; @@ -454,27 +570,34 @@ }; timer9: timer@4803e000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap5430-timer"; reg = <0x4803e000 0x80>; interrupts = <0 45 0x4>; ti,hwmods = "timer9"; }; timer10: timer@48086000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap5430-timer"; reg = <0x48086000 0x80>; interrupts = <0 46 0x4>; ti,hwmods = "timer10"; }; timer11: timer@48088000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap5430-timer"; reg = <0x48088000 0x80>; interrupts = <0 47 0x4>; ti,hwmods = "timer11"; ti,timer-pwm; }; + wdt2: wdt@4ae14000 { + compatible = "ti,omap5-wdt", "ti,omap3-wdt"; + reg = <0x4ae14000 0x80>; + interrupts = <0 80 0x4>; + ti,hwmods = "wd_timer2"; + }; + emif1: emif@0x4c000000 { compatible = "ti,emif-4d5"; ti,hwmods = "emif1"; @@ -496,5 +619,53 @@ hw-caps-ll-interface; hw-caps-temp-alert; }; + + omap_control_usb: omap-control-usb@4a002300 { + compatible = "ti,omap-control-usb"; + reg = <0x4a002300 0x4>, + <0x4a002370 0x4>; + reg-names = "control_dev_conf", "phy_power_usb"; + ti,type = <2>; + }; + + omap_dwc3@4a020000 { + compatible = "ti,dwc3"; + ti,hwmods = "usb_otg_ss"; + reg = <0x4a020000 0x1000>; + interrupts = <0 93 4>; + #address-cells = <1>; + #size-cells = <1>; + utmi-mode = <2>; + ranges; + dwc3@4a030000 { + compatible = "synopsys,dwc3"; + reg = <0x4a030000 0x1000>; + interrupts = <0 92 4>; + usb-phy = <&usb2_phy>, <&usb3_phy>; + tx-fifo-resize; + }; + }; + + ocp2scp { + compatible = "ti,omap-ocp2scp"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + ti,hwmods = "ocp2scp1"; + usb2_phy: usb2phy@4a084000 { + compatible = "ti,omap-usb2"; + reg = <0x4a084000 0x7c>; + ctrl-module = <&omap_control_usb>; + }; + + usb3_phy: usb3phy@4a084400 { + compatible = "ti,omap-usb3"; + reg = <0x4a084400 0x80>, + <0x4a084800 0x64>, + <0x4a084c00 0x40>; + reg-names = "phy_rx", "phy_tx", "pll_ctrl"; + ctrl-module = <&omap_control_usb>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/orion5x.dtsi b/arch/arm/boot/dts/orion5x.dtsi index f7bec3b1ba32..892c64e3f1e1 100644 --- a/arch/arm/boot/dts/orion5x.dtsi +++ b/arch/arm/boot/dts/orion5x.dtsi @@ -74,6 +74,20 @@ status = "okay"; }; + ehci@50000 { + compatible = "marvell,orion-ehci"; + reg = <0x50000 0x1000>; + interrupts = <17>; + status = "disabled"; + }; + + ehci@a0000 { + compatible = "marvell,orion-ehci"; + reg = <0xa0000 0x1000>; + interrupts = <12>; + status = "disabled"; + }; + sata@80000 { compatible = "marvell,orion-sata"; reg = <0x80000 0x5000>; @@ -91,6 +105,25 @@ status = "disabled"; }; + xor@60900 { + compatible = "marvell,orion-xor"; + reg = <0x60900 0x100 + 0x60b00 0x100>; + status = "okay"; + + xor00 { + interrupts = <30>; + dmacap,memcpy; + dmacap,xor; + }; + xor01 { + interrupts = <31>; + dmacap,memcpy; + dmacap,xor; + dmacap,memset; + }; + }; + crypto@90000 { compatible = "marvell,orion-crypto"; reg = <0x90000 0x10000>, diff --git a/arch/arm/boot/dts/pxa168.dtsi b/arch/arm/boot/dts/pxa168.dtsi index 31a718696080..975dad21ac38 100644 --- a/arch/arm/boot/dts/pxa168.dtsi +++ b/arch/arm/boot/dts/pxa168.dtsi @@ -77,7 +77,7 @@ }; gpio@d4019000 { - compatible = "mrvl,mmp-gpio"; + compatible = "marvell,mmp-gpio"; #address-cells = <1>; #size-cells = <1>; reg = <0xd4019000 0x1000>; diff --git a/arch/arm/boot/dts/pxa910.dtsi b/arch/arm/boot/dts/pxa910.dtsi index 825aaca33034..0247c622f580 100644 --- a/arch/arm/boot/dts/pxa910.dtsi +++ b/arch/arm/boot/dts/pxa910.dtsi @@ -89,7 +89,7 @@ }; gpio@d4019000 { - compatible = "mrvl,mmp-gpio"; + compatible = "marvell,mmp-gpio"; #address-cells = <1>; #size-cells = <1>; reg = <0xd4019000 0x1000>; diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts new file mode 100644 index 000000000000..f603c6946c29 --- /dev/null +++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts @@ -0,0 +1,52 @@ +/* + * Device Tree Source for the APE6EVM board + * + * Copyright (C) 2013 Renesas Solutions Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +/include/ "r8a73a4.dtsi" + +/ { + model = "APE6EVM"; + compatible = "renesas,ape6evm", "renesas,r8a73a4"; + + chosen { + bootargs = "console=ttySC0,115200 ignore_loglevel root=/dev/nfs ip=dhcp"; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x40000000>; + }; + + ape6evm_fixed_3v3: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + lbsc { + #address-cells = <1>; + #size-cells = <1>; + + ethernet@8000000 { + compatible = "smsc,lan9118", "smsc,lan9115"; + reg = <0x08000000 0x1000>; + interrupt-parent = <&irqc1>; + interrupts = <8 0x4>; + phy-mode = "mii"; + reg-io-width = <4>; + smsc,irq-active-high; + smsc,irq-push-pull; + vdd33a-supply = <&ape6evm_fixed_3v3>; + vddvario-supply = <&ape6evm_fixed_3v3>; + }; + }; +}; diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi new file mode 100644 index 000000000000..fde2a337d1ff --- /dev/null +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -0,0 +1,94 @@ +/* + * Device Tree Source for the r8a73a4 SoC + * + * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013 Magnus Damm + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/ { + compatible = "renesas,r8a73a4"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + clock-frequency = <1500000000>; + }; + }; + + gic: interrupt-controller@f1001000 { + compatible = "arm,cortex-a15-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0xf1001000 0 0x1000>, + <0 0xf1002000 0 0x1000>, + <0 0xf1004000 0 0x2000>, + <0 0xf1006000 0 0x2000>; + interrupts = <1 9 0xf04>; + + gic-cpuif@4 { + compatible = "arm,gic-cpuif"; + cpuif-id = <4>; + cpu = <&cpu0>; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 13 0xf08>, + <1 14 0xf08>, + <1 11 0xf08>, + <1 10 0xf08>; + }; + + irqc0: interrupt-controller@e61c0000 { + compatible = "renesas,irqc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0 0xe61c0000 0 0x200>; + interrupt-parent = <&gic>; + interrupts = <0 0 4>, <0 1 4>, <0 2 4>, <0 3 4>, + <0 4 4>, <0 5 4>, <0 6 4>, <0 7 4>, + <0 8 4>, <0 9 4>, <0 10 4>, <0 11 4>, + <0 12 4>, <0 13 4>, <0 14 4>, <0 15 4>, + <0 16 4>, <0 17 4>, <0 18 4>, <0 19 4>, + <0 20 4>, <0 21 4>, <0 22 4>, <0 23 4>, + <0 24 4>, <0 25 4>, <0 26 4>, <0 27 4>, + <0 28 4>, <0 29 4>, <0 30 4>, <0 31 4>; + }; + + irqc1: interrupt-controller@e61c0200 { + compatible = "renesas,irqc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0 0xe61c0200 0 0x200>; + interrupt-parent = <&gic>; + interrupts = <0 32 4>, <0 33 4>, <0 34 4>, <0 35 4>, + <0 36 4>, <0 37 4>, <0 38 4>, <0 39 4>, + <0 40 4>, <0 41 4>, <0 42 4>, <0 43 4>, + <0 44 4>, <0 45 4>, <0 46 4>, <0 47 4>, + <0 48 4>, <0 49 4>, <0 50 4>, <0 51 4>, + <0 52 4>, <0 53 4>, <0 54 4>, <0 55 4>, + <0 56 4>, <0 57 4>; + }; + + thermal@e61f0000 { + compatible = "renesas,rcar-thermal"; + reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>, + <0 0xe61f0200 0 0x38>, <0 0xe61f0300 0 0x38>; + interrupt-parent = <&gic>; + interrupts = <0 69 4>; + }; +}; diff --git a/arch/arm/boot/dts/r8a7778-bockw.dts b/arch/arm/boot/dts/r8a7778-bockw.dts new file mode 100644 index 000000000000..0076b1e8a0fb --- /dev/null +++ b/arch/arm/boot/dts/r8a7778-bockw.dts @@ -0,0 +1,32 @@ +/* + * Reference Device Tree Source for the Bock-W board + * + * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> + * + * based on r8a7779 + * + * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013 Simon Horman + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +/include/ "r8a7778.dtsi" + +/ { + model = "bockw"; + compatible = "renesas,bockw", "renesas,r8a7778"; + + chosen { + bootargs = "console=ttySC0,115200 ignore_loglevel ip=dhcp root=/dev/nfs"; + }; + + memory { + device_type = "memory"; + reg = <0x60000000 0x10000000>; + }; +}; diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi new file mode 100644 index 000000000000..474373559bdc --- /dev/null +++ b/arch/arm/boot/dts/r8a7778.dtsi @@ -0,0 +1,35 @@ +/* + * Device Tree Source for Renesas r8a7778 + * + * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> + * + * based on r8a7779 + * + * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013 Simon Horman + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "renesas,r8a7778"; + + cpus { + cpu@0 { + compatible = "arm,cortex-a9"; + }; + }; + + gic: interrupt-controller@fe438000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0xfe438000 0x1000>, + <0xfe430000 0x100>; + }; +}; diff --git a/arch/arm/boot/dts/r8a7779-marzen-reference.dts b/arch/arm/boot/dts/r8a7779-marzen-reference.dts new file mode 100644 index 000000000000..72be4c87cfb5 --- /dev/null +++ b/arch/arm/boot/dts/r8a7779-marzen-reference.dts @@ -0,0 +1,47 @@ +/* + * Reference Device Tree Source for the Marzen board + * + * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013 Simon Horman + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +/include/ "r8a7779.dtsi" + +/ { + model = "marzen"; + compatible = "renesas,marzen-reference", "renesas,r8a7779"; + + chosen { + bootargs = "console=ttySC2,115200 earlyprintk=sh-sci.2,115200 ignore_loglevel root=/dev/nfs ip=on"; + }; + + memory { + device_type = "memory"; + reg = <0x60000000 0x40000000>; + }; + + fixedregulator3v3: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + lan0@18000000 { + compatible = "smsc,lan9220", "smsc,lan9115"; + reg = <0x18000000 0x100>; + phy-mode = "mii"; + interrupt-parent = <&gic>; + interrupts = <0 28 0x4>; + reg-io-width = <4>; + vddvario-supply = <&fixedregulator3v3>; + vdd33a-supply = <&fixedregulator3v3>; + }; +}; diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi new file mode 100644 index 000000000000..fe5c6f213271 --- /dev/null +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -0,0 +1,98 @@ +/* + * Device Tree Source for Renesas r8a7779 + * + * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013 Simon Horman + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "renesas,r8a7779"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + }; + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <1>; + }; + cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <2>; + }; + cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <3>; + }; + }; + + gic: interrupt-controller@f0001000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0xf0001000 0x1000>, + <0xf0000100 0x100>; + }; + + i2c0: i2c@0xffc70000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0xffc70000 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 79 0x4>; + }; + + i2c1: i2c@0xffc71000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0xffc71000 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 82 0x4>; + }; + + i2c2: i2c@0xffc72000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0xffc72000 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 80 0x4>; + }; + + i2c3: i2c@0xffc73000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0xffc73000 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 81 0x4>; + }; + + thermal@ffc48000 { + compatible = "renesas,rcar-thermal"; + reg = <0xffc48000 0x38>; + }; + + sata: sata@fc600000 { + compatible = "renesas,rcar-sata"; + reg = <0xfc600000 0x2000>; + interrupt-parent = <&gic>; + interrupts = <0 100 0x4>; + }; +}; diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts new file mode 100644 index 000000000000..09a84fce89d6 --- /dev/null +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -0,0 +1,31 @@ +/* + * Device Tree Source for the Lager board + * + * Copyright (C) 2013 Renesas Solutions Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +/include/ "r8a7790.dtsi" + +/ { + model = "Lager"; + compatible = "renesas,lager", "renesas,r8a7790"; + + chosen { + bootargs = "console=ttySC6,115200 ignore_loglevel"; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x80000000>; + }; + + lbsc { + #address-cells = <1>; + #size-cells = <1>; + }; +}; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi new file mode 100644 index 000000000000..7a1711027e41 --- /dev/null +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -0,0 +1,63 @@ +/* + * Device Tree Source for the r8a7790 SoC + * + * Copyright (C) 2013 Renesas Solutions Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/ { + compatible = "renesas,r8a7790"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + clock-frequency = <1300000000>; + }; + }; + + gic: interrupt-controller@f1001000 { + compatible = "arm,cortex-a15-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0xf1001000 0 0x1000>, + <0 0xf1002000 0 0x1000>, + <0 0xf1004000 0 0x2000>, + <0 0xf1006000 0 0x2000>; + interrupts = <1 9 0xf04>; + + gic-cpuif@4 { + compatible = "arm,gic-cpuif"; + cpuif-id = <4>; + cpu = <&cpu0>; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 13 0xf08>, + <1 14 0xf08>, + <1 11 0xf08>, + <1 10 0xf08>; + }; + + irqc0: interrupt-controller@e61c0000 { + compatible = "renesas,irqc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0 0xe61c0000 0 0x200>; + interrupt-parent = <&gic>; + interrupts = <0 0 4>, <0 1 4>, <0 2 4>, <0 3 4>; + }; +}; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi new file mode 100644 index 000000000000..2e643ea51cce --- /dev/null +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -0,0 +1,1046 @@ +/* + * sama5d3.dtsi - Device Tree Include file for SAMA5D3 family SoC + * applies to SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35 SoC + * + * Copyright (C) 2013 Atmel, + * 2013 Ludovic Desroches <ludovic.desroches@atmel.com> + * + * Licensed under GPLv2 or later. + */ + +/include/ "skeleton.dtsi" + +/ { + model = "Atmel SAMA5D3 family SoC"; + compatible = "atmel,sama5d3", "atmel,sama5"; + interrupt-parent = <&aic>; + + aliases { + serial0 = &dbgu; + serial1 = &usart0; + serial2 = &usart1; + serial3 = &usart2; + serial4 = &usart3; + gpio0 = &pioA; + gpio1 = &pioB; + gpio2 = &pioC; + gpio3 = &pioD; + gpio4 = &pioE; + tcb0 = &tcb0; + tcb1 = &tcb1; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + ssc0 = &ssc0; + ssc1 = &ssc1; + }; + cpus { + cpu@0 { + compatible = "arm,cortex-a5"; + }; + }; + + memory { + reg = <0x20000000 0x8000000>; + }; + + ahb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + apb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mmc0: mmc@f0000000 { + compatible = "atmel,hsmci"; + reg = <0xf0000000 0x600>; + interrupts = <21 4 0>; + dmas = <&dma0 2 0>; + dma-names = "rxtx"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + spi0: spi@f0004000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91sam9x5-spi"; + reg = <0xf0004000 0x100>; + interrupts = <24 4 3>; + cs-gpios = <&pioD 13 0 + &pioD 14 0 /* conflicts with SCK0 and CANRX0 */ + &pioD 15 0 /* conflicts with CTS0 and CANTX0 */ + &pioD 16 0 /* conflicts with RTS0 and PWMFI3 */ + >; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0>; + status = "disabled"; + }; + + ssc0: ssc@f0008000 { + compatible = "atmel,at91sam9g45-ssc"; + reg = <0xf0008000 0x4000>; + interrupts = <38 4 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; + status = "disabled"; + }; + + can0: can@f000c000 { + compatible = "atmel,at91sam9x5-can"; + reg = <0xf000c000 0x300>; + interrupts = <40 4 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can0_rx_tx>; + status = "disabled"; + }; + + tcb0: timer@f0010000 { + compatible = "atmel,at91sam9x5-tcb"; + reg = <0xf0010000 0x100>; + interrupts = <26 4 0>; + }; + + i2c0: i2c@f0014000 { + compatible = "atmel,at91sam9x5-i2c"; + reg = <0xf0014000 0x4000>; + interrupts = <18 4 6>; + dmas = <&dma0 2 7>, + <&dma0 2 8>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@f0018000 { + compatible = "atmel,at91sam9x5-i2c"; + reg = <0xf0018000 0x4000>; + interrupts = <19 4 6>; + dmas = <&dma0 2 9>, + <&dma0 2 10>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + usart0: serial@f001c000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf001c000 0x100>; + interrupts = <12 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart0>; + status = "disabled"; + }; + + usart1: serial@f0020000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf0020000 0x100>; + interrupts = <13 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart1>; + status = "disabled"; + }; + + macb0: ethernet@f0028000 { + compatible = "cnds,pc302-gem", "cdns,gem"; + reg = <0xf0028000 0x100>; + interrupts = <34 4 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb0_data_rgmii &pinctrl_macb0_signal_rgmii>; + status = "disabled"; + }; + + isi: isi@f0034000 { + compatible = "atmel,at91sam9g45-isi"; + reg = <0xf0034000 0x4000>; + interrupts = <37 4 5>; + status = "disabled"; + }; + + mmc1: mmc@f8000000 { + compatible = "atmel,hsmci"; + reg = <0xf8000000 0x600>; + interrupts = <22 4 0>; + dmas = <&dma1 2 0>; + dma-names = "rxtx"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc2: mmc@f8004000 { + compatible = "atmel,hsmci"; + reg = <0xf8004000 0x600>; + interrupts = <23 4 0>; + dmas = <&dma1 2 1>; + dma-names = "rxtx"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc2_clk_cmd_dat0 &pinctrl_mmc2_dat1_3>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + spi1: spi@f8008000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91sam9x5-spi"; + reg = <0xf8008000 0x100>; + interrupts = <25 4 3>; + cs-gpios = <&pioC 25 0 + &pioC 26 0 /* conflitcs with TWD1 and ISI_D11 */ + &pioC 27 0 /* conflitcs with TWCK1 and ISI_D10 */ + &pioC 28 0 /* conflitcs with PWMFI0 and ISI_D9 */ + >; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1>; + status = "disabled"; + }; + + ssc1: ssc@f800c000 { + compatible = "atmel,at91sam9g45-ssc"; + reg = <0xf800c000 0x4000>; + interrupts = <39 4 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; + status = "disabled"; + }; + + can1: can@f8010000 { + compatible = "atmel,at91sam9x5-can"; + reg = <0xf8010000 0x300>; + interrupts = <41 4 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1_rx_tx>; + }; + + tcb1: timer@f8014000 { + compatible = "atmel,at91sam9x5-tcb"; + reg = <0xf8014000 0x100>; + interrupts = <27 4 0>; + }; + + adc0: adc@f8018000 { + compatible = "atmel,at91sam9260-adc"; + reg = <0xf8018000 0x100>; + interrupts = <29 4 5>; + pinctrl-names = "default"; + pinctrl-0 = < + &pinctrl_adc0_adtrg + &pinctrl_adc0_ad0 + &pinctrl_adc0_ad1 + &pinctrl_adc0_ad2 + &pinctrl_adc0_ad3 + &pinctrl_adc0_ad4 + &pinctrl_adc0_ad5 + &pinctrl_adc0_ad6 + &pinctrl_adc0_ad7 + &pinctrl_adc0_ad8 + &pinctrl_adc0_ad9 + &pinctrl_adc0_ad10 + &pinctrl_adc0_ad11 + >; + atmel,adc-channel-base = <0x50>; + atmel,adc-channels-used = <0xfff>; + atmel,adc-drdy-mask = <0x1000000>; + atmel,adc-num-channels = <12>; + atmel,adc-startup-time = <40>; + atmel,adc-status-register = <0x30>; + atmel,adc-trigger-register = <0xc0>; + atmel,adc-use-external; + atmel,adc-vref = <3000>; + atmel,adc-res = <10 12>; + atmel,adc-res-names = "lowres", "highres"; + status = "disabled"; + + trigger@0 { + trigger-name = "external-rising"; + trigger-value = <0x1>; + trigger-external; + }; + trigger@1 { + trigger-name = "external-falling"; + trigger-value = <0x2>; + trigger-external; + }; + trigger@2 { + trigger-name = "external-any"; + trigger-value = <0x3>; + trigger-external; + }; + trigger@3 { + trigger-name = "continuous"; + trigger-value = <0x6>; + }; + }; + + tsadcc: tsadcc@f8018000 { + compatible = "atmel,at91sam9x5-tsadcc"; + reg = <0xf8018000 0x4000>; + interrupts = <29 4 5>; + atmel,tsadcc_clock = <300000>; + atmel,filtering_average = <0x03>; + atmel,pendet_debounce = <0x08>; + atmel,pendet_sensitivity = <0x02>; + atmel,ts_sample_hold_time = <0x0a>; + status = "disabled"; + }; + + i2c2: i2c@f801c000 { + compatible = "atmel,at91sam9x5-i2c"; + reg = <0xf801c000 0x4000>; + interrupts = <20 4 6>; + dmas = <&dma1 2 11>, + <&dma1 2 12>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + usart2: serial@f8020000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf8020000 0x100>; + interrupts = <14 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart2>; + status = "disabled"; + }; + + usart3: serial@f8024000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf8024000 0x100>; + interrupts = <15 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart3>; + status = "disabled"; + }; + + macb1: ethernet@f802c000 { + compatible = "cdns,at32ap7000-macb", "cdns,macb"; + reg = <0xf802c000 0x100>; + interrupts = <35 4 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb1_rmii>; + status = "disabled"; + }; + + sha@f8034000 { + compatible = "atmel,sam9g46-sha"; + reg = <0xf8034000 0x100>; + interrupts = <42 4 0>; + }; + + aes@f8038000 { + compatible = "atmel,sam9g46-aes"; + reg = <0xf8038000 0x100>; + interrupts = <43 4 0>; + }; + + tdes@f803c000 { + compatible = "atmel,sam9g46-tdes"; + reg = <0xf803c000 0x100>; + interrupts = <44 4 0>; + }; + + dma0: dma-controller@ffffe600 { + compatible = "atmel,at91sam9g45-dma"; + reg = <0xffffe600 0x200>; + interrupts = <30 4 0>; + #dma-cells = <2>; + }; + + dma1: dma-controller@ffffe800 { + compatible = "atmel,at91sam9g45-dma"; + reg = <0xffffe800 0x200>; + interrupts = <31 4 0>; + #dma-cells = <2>; + }; + + ramc0: ramc@ffffea00 { + compatible = "atmel,at91sam9g45-ddramc"; + reg = <0xffffea00 0x200>; + }; + + dbgu: serial@ffffee00 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xffffee00 0x200>; + interrupts = <2 4 7>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dbgu>; + status = "disabled"; + }; + + aic: interrupt-controller@fffff000 { + #interrupt-cells = <3>; + compatible = "atmel,sama5d3-aic"; + interrupt-controller; + reg = <0xfffff000 0x200>; + atmel,external-irqs = <47>; + }; + + pinctrl@fffff200 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus"; + ranges = <0xfffff200 0xfffff200 0xa00>; + atmel,mux-mask = < + /* A B C */ + 0xffffffff 0xc0fc0000 0xc0ff0000 /* pioA */ + 0xffffffff 0x0ff8ffff 0x00000000 /* pioB */ + 0xffffffff 0xbc00f1ff 0x7c00fc00 /* pioC */ + 0xffffffff 0xc001c0e0 0x0001c1e0 /* pioD */ + 0xffffffff 0xbf9f8000 0x18000000 /* pioE */ + >; + + /* shared pinctrl settings */ + adc0 { + pinctrl_adc0_adtrg: adc0_adtrg { + atmel,pins = + <3 19 0x1 0x0>; /* PD19 periph A ADTRG */ + }; + pinctrl_adc0_ad0: adc0_ad0 { + atmel,pins = + <3 20 0x1 0x0>; /* PD20 periph A AD0 */ + }; + pinctrl_adc0_ad1: adc0_ad1 { + atmel,pins = + <3 21 0x1 0x0>; /* PD21 periph A AD1 */ + }; + pinctrl_adc0_ad2: adc0_ad2 { + atmel,pins = + <3 22 0x1 0x0>; /* PD22 periph A AD2 */ + }; + pinctrl_adc0_ad3: adc0_ad3 { + atmel,pins = + <3 23 0x1 0x0>; /* PD23 periph A AD3 */ + }; + pinctrl_adc0_ad4: adc0_ad4 { + atmel,pins = + <3 24 0x1 0x0>; /* PD24 periph A AD4 */ + }; + pinctrl_adc0_ad5: adc0_ad5 { + atmel,pins = + <3 25 0x1 0x0>; /* PD25 periph A AD5 */ + }; + pinctrl_adc0_ad6: adc0_ad6 { + atmel,pins = + <3 26 0x1 0x0>; /* PD26 periph A AD6 */ + }; + pinctrl_adc0_ad7: adc0_ad7 { + atmel,pins = + <3 27 0x1 0x0>; /* PD27 periph A AD7 */ + }; + pinctrl_adc0_ad8: adc0_ad8 { + atmel,pins = + <3 28 0x1 0x0>; /* PD28 periph A AD8 */ + }; + pinctrl_adc0_ad9: adc0_ad9 { + atmel,pins = + <3 29 0x1 0x0>; /* PD29 periph A AD9 */ + }; + pinctrl_adc0_ad10: adc0_ad10 { + atmel,pins = + <3 30 0x1 0x0>; /* PD30 periph A AD10, conflicts with PCK0 */ + }; + pinctrl_adc0_ad11: adc0_ad11 { + atmel,pins = + <3 31 0x1 0x0>; /* PD31 periph A AD11, conflicts with PCK1 */ + }; + }; + + can0 { + pinctrl_can0_rx_tx: can0_rx_tx { + atmel,pins = + <3 14 0x3 0x0 /* PD14 periph C RX, conflicts with SCK0, SPI0_NPCS1 */ + 3 15 0x3 0x0>; /* PD15 periph C TX, conflicts with CTS0, SPI0_NPCS2 */ + }; + }; + + can1 { + pinctrl_can1_rx_tx: can1_rx_tx { + atmel,pins = + <1 14 0x2 0x0 /* PB14 periph B RX, conflicts with GCRS */ + 1 15 0x2 0x0>; /* PB15 periph B TX, conflicts with GCOL */ + }; + }; + + dbgu { + pinctrl_dbgu: dbgu-0 { + atmel,pins = + <1 30 0x1 0x0 /* PB30 periph A */ + 1 31 0x1 0x1>; /* PB31 periph A with pullup */ + }; + }; + + i2c0 { + pinctrl_i2c0: i2c0-0 { + atmel,pins = + <0 30 0x1 0x0 /* PA30 periph A TWD0 pin, conflicts with URXD1, ISI_VSYNC */ + 0 31 0x1 0x0>; /* PA31 periph A TWCK0 pin, conflicts with UTXD1, ISI_HSYNC */ + }; + }; + + i2c1 { + pinctrl_i2c1: i2c1-0 { + atmel,pins = + <2 26 0x2 0x0 /* PC26 periph B TWD1 pin, conflicts with SPI1_NPCS1, ISI_D11 */ + 2 27 0x2 0x0>; /* PC27 periph B TWCK1 pin, conflicts with SPI1_NPCS2, ISI_D10 */ + }; + }; + + isi { + pinctrl_isi: isi-0 { + atmel,pins = + <0 16 0x3 0x0 /* PA16 periph C ISI_D0, conflicts with LCDDAT16 */ + 0 17 0x3 0x0 /* PA17 periph C ISI_D1, conflicts with LCDDAT17 */ + 0 18 0x3 0x0 /* PA18 periph C ISI_D2, conflicts with LCDDAT18, TWD2 */ + 0 19 0x3 0x0 /* PA19 periph C ISI_D3, conflicts with LCDDAT19, TWCK2 */ + 0 20 0x3 0x0 /* PA20 periph C ISI_D4, conflicts with LCDDAT20, PWMH0 */ + 0 21 0x3 0x0 /* PA21 periph C ISI_D5, conflicts with LCDDAT21, PWML0 */ + 0 22 0x3 0x0 /* PA22 periph C ISI_D6, conflicts with LCDDAT22, PWMH1 */ + 0 23 0x3 0x0 /* PA23 periph C ISI_D7, conflicts with LCDDAT23, PWML1 */ + 2 30 0x3 0x0 /* PC30 periph C ISI_PCK, conflicts with UTXD0 */ + 0 31 0x3 0x0 /* PA31 periph C ISI_HSYNC, conflicts with TWCK0, UTXD1 */ + 0 30 0x3 0x0 /* PA30 periph C ISI_VSYNC, conflicts with TWD0, URXD1 */ + 2 29 0x3 0x0 /* PC29 periph C ISI_PD8, conflicts with URXD0, PWMFI2 */ + 2 28 0x3 0x0>; /* PC28 periph C ISI_PD9, conflicts with SPI1_NPCS3, PWMFI0 */ + }; + pinctrl_isi_pck_as_mck: isi_pck_as_mck-0 { + atmel,pins = + <3 31 0x2 0x0>; /* PD31 periph B ISI_MCK */ + }; + }; + + lcd { + pinctrl_lcd: lcd-0 { + atmel,pins = + <0 24 0x1 0x0 /* PA24 periph A LCDPWM */ + 0 26 0x1 0x0 /* PA26 periph A LCDVSYNC */ + 0 27 0x1 0x0 /* PA27 periph A LCDHSYNC */ + 0 25 0x1 0x0 /* PA25 periph A LCDDISP */ + 0 29 0x1 0x0 /* PA29 periph A LCDDEN */ + 0 28 0x1 0x0 /* PA28 periph A LCDPCK */ + 0 0 0x1 0x0 /* PA0 periph A LCDD0 pin */ + 0 1 0x1 0x0 /* PA1 periph A LCDD1 pin */ + 0 2 0x1 0x0 /* PA2 periph A LCDD2 pin */ + 0 3 0x1 0x0 /* PA3 periph A LCDD3 pin */ + 0 4 0x1 0x0 /* PA4 periph A LCDD4 pin */ + 0 5 0x1 0x0 /* PA5 periph A LCDD5 pin */ + 0 6 0x1 0x0 /* PA6 periph A LCDD6 pin */ + 0 7 0x1 0x0 /* PA7 periph A LCDD7 pin */ + 0 8 0x1 0x0 /* PA8 periph A LCDD8 pin */ + 0 9 0x1 0x0 /* PA9 periph A LCDD9 pin */ + 0 10 0x1 0x0 /* PA10 periph A LCDD10 pin */ + 0 11 0x1 0x0 /* PA11 periph A LCDD11 pin */ + 0 12 0x1 0x0 /* PA12 periph A LCDD12 pin */ + 0 13 0x1 0x0 /* PA13 periph A LCDD13 pin */ + 0 14 0x1 0x0 /* PA14 periph A LCDD14 pin */ + 0 15 0x1 0x0 /* PA15 periph A LCDD15 pin */ + 2 14 0x3 0x0 /* PC14 periph C LCDD16 pin */ + 2 13 0x3 0x0 /* PC13 periph C LCDD17 pin */ + 2 12 0x3 0x0 /* PC12 periph C LCDD18 pin */ + 2 11 0x3 0x0 /* PC11 periph C LCDD19 pin */ + 2 10 0x3 0x0 /* PC10 periph C LCDD20 pin */ + 2 15 0x3 0x0 /* PC15 periph C LCDD21 pin */ + 4 27 0x3 0x0 /* PE27 periph C LCDD22 pin */ + 4 28 0x3 0x0>; /* PE28 periph C LCDD23 pin */ + }; + }; + + macb0 { + pinctrl_macb0_data_rgmii: macb0_data_rgmii { + atmel,pins = + <1 0 0x1 0x0 /* PB0 periph A GTX0, conflicts with PWMH0 */ + 1 1 0x1 0x0 /* PB1 periph A GTX1, conflicts with PWML0 */ + 1 2 0x1 0x0 /* PB2 periph A GTX2, conflicts with TK1 */ + 1 3 0x1 0x0 /* PB3 periph A GTX3, conflicts with TF1 */ + 1 4 0x1 0x0 /* PB4 periph A GRX0, conflicts with PWMH1 */ + 1 5 0x1 0x0 /* PB5 periph A GRX1, conflicts with PWML1 */ + 1 6 0x1 0x0 /* PB6 periph A GRX2, conflicts with TD1 */ + 1 7 0x1 0x0>; /* PB7 periph A GRX3, conflicts with RK1 */ + }; + pinctrl_macb0_data_gmii: macb0_data_gmii { + atmel,pins = + <1 19 0x2 0x0 /* PB19 periph B GTX4, conflicts with MCI1_CDA */ + 1 20 0x2 0x0 /* PB20 periph B GTX5, conflicts with MCI1_DA0 */ + 1 21 0x2 0x0 /* PB21 periph B GTX6, conflicts with MCI1_DA1 */ + 1 22 0x2 0x0 /* PB22 periph B GTX7, conflicts with MCI1_DA2 */ + 1 23 0x2 0x0 /* PB23 periph B GRX4, conflicts with MCI1_DA3 */ + 1 24 0x2 0x0 /* PB24 periph B GRX5, conflicts with MCI1_CK */ + 1 25 0x2 0x0 /* PB25 periph B GRX6, conflicts with SCK1 */ + 1 26 0x2 0x0>; /* PB26 periph B GRX7, conflicts with CTS1 */ + }; + pinctrl_macb0_signal_rgmii: macb0_signal_rgmii { + atmel,pins = + <1 8 0x1 0x0 /* PB8 periph A GTXCK, conflicts with PWMH2 */ + 1 9 0x1 0x0 /* PB9 periph A GTXEN, conflicts with PWML2 */ + 1 11 0x1 0x0 /* PB11 periph A GRXCK, conflicts with RD1 */ + 1 13 0x1 0x0 /* PB13 periph A GRXER, conflicts with PWML3 */ + 1 16 0x1 0x0 /* PB16 periph A GMDC */ + 1 17 0x1 0x0 /* PB17 periph A GMDIO */ + 1 18 0x1 0x0>; /* PB18 periph A G125CK */ + }; + pinctrl_macb0_signal_gmii: macb0_signal_gmii { + atmel,pins = + <1 9 0x1 0x0 /* PB9 periph A GTXEN, conflicts with PWML2 */ + 1 10 0x1 0x0 /* PB10 periph A GTXER, conflicts with RF1 */ + 1 11 0x1 0x0 /* PB11 periph A GRXCK, conflicts with RD1 */ + 1 12 0x1 0x0 /* PB12 periph A GRXDV, conflicts with PWMH3 */ + 1 13 0x1 0x0 /* PB13 periph A GRXER, conflicts with PWML3 */ + 1 14 0x1 0x0 /* PB14 periph A GCRS, conflicts with CANRX1 */ + 1 15 0x1 0x0 /* PB15 periph A GCOL, conflicts with CANTX1 */ + 1 16 0x1 0x0 /* PB16 periph A GMDC */ + 1 17 0x1 0x0 /* PB17 periph A GMDIO */ + 1 27 0x2 0x0>; /* PB27 periph B G125CKO */ + }; + + }; + + macb1 { + pinctrl_macb1_rmii: macb1_rmii-0 { + atmel,pins = + <2 0 0x1 0x0 /* PC0 periph A ETX0, conflicts with TIOA3 */ + 2 1 0x1 0x0 /* PC1 periph A ETX1, conflicts with TIOB3 */ + 2 2 0x1 0x0 /* PC2 periph A ERX0, conflicts with TCLK3 */ + 2 3 0x1 0x0 /* PC3 periph A ERX1, conflicts with TIOA4 */ + 2 4 0x1 0x0 /* PC4 periph A ETXEN, conflicts with TIOB4 */ + 2 5 0x1 0x0 /* PC5 periph A ECRSDV,conflicts with TCLK4 */ + 2 6 0x1 0x0 /* PC6 periph A ERXER, conflicts with TIOA5 */ + 2 7 0x1 0x0 /* PC7 periph A EREFCK, conflicts with TIOB5 */ + 2 8 0x1 0x0 /* PC8 periph A EMDC, conflicts with TCLK5 */ + 2 9 0x1 0x0>; /* PC9 periph A EMDIO */ + }; + }; + + mmc0 { + pinctrl_mmc0_clk_cmd_dat0: mmc0_clk_cmd_dat0 { + atmel,pins = + <3 9 0x1 0x0 /* PD9 periph A MCI0_CK */ + 3 0 0x1 0x1 /* PD0 periph A MCI0_CDA with pullup */ + 3 1 0x1 0x1>; /* PD1 periph A MCI0_DA0 with pullup */ + }; + pinctrl_mmc0_dat1_3: mmc0_dat1_3 { + atmel,pins = + <3 2 0x1 0x1 /* PD2 periph A MCI0_DA1 with pullup */ + 3 3 0x1 0x1 /* PD3 periph A MCI0_DA2 with pullup */ + 3 4 0x1 0x1>; /* PD4 periph A MCI0_DA3 with pullup */ + }; + pinctrl_mmc0_dat4_7: mmc0_dat4_7 { + atmel,pins = + <3 5 0x1 0x1 /* PD5 periph A MCI0_DA4 with pullup, conflicts with TIOA0, PWMH2 */ + 3 6 0x1 0x1 /* PD6 periph A MCI0_DA5 with pullup, conflicts with TIOB0, PWML2 */ + 3 7 0x1 0x1 /* PD7 periph A MCI0_DA6 with pullup, conlicts with TCLK0, PWMH3 */ + 3 8 0x1 0x1>; /* PD8 periph A MCI0_DA7 with pullup, conflicts with PWML3 */ + }; + }; + + mmc1 { + pinctrl_mmc1_clk_cmd_dat0: mmc1_clk_cmd_dat0 { + atmel,pins = + <1 24 0x1 0x0 /* PB24 periph A MCI1_CK, conflicts with GRX5 */ + 1 19 0x1 0x1 /* PB19 periph A MCI1_CDA with pullup, conflicts with GTX4 */ + 1 20 0x1 0x1>; /* PB20 periph A MCI1_DA0 with pullup, conflicts with GTX5 */ + }; + pinctrl_mmc1_dat1_3: mmc1_dat1_3 { + atmel,pins = + <1 21 0x1 0x1 /* PB21 periph A MCI1_DA1 with pullup, conflicts with GTX6 */ + 1 22 0x1 0x1 /* PB22 periph A MCI1_DA2 with pullup, conflicts with GTX7 */ + 1 23 0x1 0x1>; /* PB23 periph A MCI1_DA3 with pullup, conflicts with GRX4 */ + }; + }; + + mmc2 { + pinctrl_mmc2_clk_cmd_dat0: mmc2_clk_cmd_dat0 { + atmel,pins = + <2 15 0x1 0x0 /* PC15 periph A MCI2_CK, conflicts with PCK2 */ + 2 10 0x1 0x1 /* PC10 periph A MCI2_CDA with pullup */ + 2 11 0x1 0x1>; /* PC11 periph A MCI2_DA0 with pullup */ + }; + pinctrl_mmc2_dat1_3: mmc2_dat1_3 { + atmel,pins = + <2 12 0x1 0x0 /* PC12 periph A MCI2_DA1 with pullup, conflicts with TIOA1 */ + 2 13 0x1 0x0 /* PC13 periph A MCI2_DA2 with pullup, conflicts with TIOB1 */ + 2 14 0x1 0x0>; /* PC14 periph A MCI2_DA3 with pullup, conflicts with TCLK1 */ + }; + }; + + nand0 { + pinctrl_nand0_ale_cle: nand0_ale_cle-0 { + atmel,pins = + <4 21 0x1 0x1 /* PE21 periph A with pullup */ + 4 22 0x1 0x1>; /* PE22 periph A with pullup */ + }; + }; + + pioA: gpio@fffff200 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff200 0x100>; + interrupts = <6 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioB: gpio@fffff400 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x100>; + interrupts = <7 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioC: gpio@fffff600 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff600 0x100>; + interrupts = <8 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioD: gpio@fffff800 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff800 0x100>; + interrupts = <9 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioE: gpio@fffffa00 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffffa00 0x100>; + interrupts = <10 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + spi0 { + pinctrl_spi0: spi0-0 { + atmel,pins = + <3 10 0x1 0x0 /* PD10 periph A SPI0_MISO pin */ + 3 11 0x1 0x0 /* PD11 periph A SPI0_MOSI pin */ + 3 12 0x1 0x0 /* PD12 periph A SPI0_SPCK pin */ + 3 13 0x0 0x0>; /* PD13 GPIO SPI0_NPCS0 pin */ + }; + }; + + spi1 { + pinctrl_spi1: spi1-0 { + atmel,pins = + <2 22 0x1 0x0 /* PC22 periph A SPI1_MISO pin */ + 2 23 0x1 0x0 /* PC23 periph A SPI1_MOSI pin */ + 2 24 0x1 0x0 /* PC24 periph A SPI1_SPCK pin */ + 2 25 0x0 0x0>; /* PC25 GPIO SPI1_NPCS0 pin */ + }; + }; + + ssc0 { + pinctrl_ssc0_tx: ssc0_tx { + atmel,pins = + <2 16 0x1 0x0 /* PC16 periph A TK0 */ + 2 17 0x1 0x0 /* PC17 periph A TF0 */ + 2 18 0x1 0x0>; /* PC18 periph A TD0 */ + }; + + pinctrl_ssc0_rx: ssc0_rx { + atmel,pins = + <2 19 0x1 0x0 /* PC19 periph A RK0 */ + 2 20 0x1 0x0 /* PC20 periph A RF0 */ + 2 21 0x1 0x0>; /* PC21 periph A RD0 */ + }; + }; + + ssc1 { + pinctrl_ssc1_tx: ssc1_tx { + atmel,pins = + <1 2 0x2 0x0 /* PB2 periph B TK1, conflicts with GTX2 */ + 1 3 0x2 0x0 /* PB3 periph B TF1, conflicts with GTX3 */ + 1 6 0x2 0x0>; /* PB6 periph B TD1, conflicts with TD1 */ + }; + + pinctrl_ssc1_rx: ssc1_rx { + atmel,pins = + <1 7 0x2 0x0 /* PB7 periph B RK1, conflicts with EREFCK */ + 1 10 0x2 0x0 /* PB10 periph B RF1, conflicts with GTXER */ + 1 11 0x2 0x0>; /* PB11 periph B RD1, conflicts with GRXCK */ + }; + }; + + uart0 { + pinctrl_uart0: uart0-0 { + atmel,pins = + <2 29 0x1 0x0 /* PC29 periph A, conflicts with PWMFI2, ISI_D8 */ + 2 30 0x1 0x1>; /* PC30 periph A with pullup, conflicts with ISI_PCK */ + }; + }; + + uart1 { + pinctrl_uart1: uart1-0 { + atmel,pins = + <0 30 0x2 0x0 /* PA30 periph B, conflicts with TWD0, ISI_VSYNC */ + 0 31 0x2 0x1>; /* PA31 periph B with pullup, conflicts with TWCK0, ISI_HSYNC */ + }; + }; + + usart0 { + pinctrl_usart0: usart0-0 { + atmel,pins = + <3 17 0x1 0x0 /* PD17 periph A */ + 3 18 0x1 0x1>; /* PD18 periph A with pullup */ + }; + + pinctrl_usart0_rts_cts: usart0_rts_cts-0 { + atmel,pins = + <3 15 0x1 0x0 /* PD15 periph A, conflicts with SPI0_NPCS2, CANTX0 */ + 3 16 0x1 0x0>; /* PD16 periph A, conflicts with SPI0_NPCS3, PWMFI3 */ + }; + }; + + usart1 { + pinctrl_usart1: usart1-0 { + atmel,pins = + <1 28 0x1 0x0 /* PB28 periph A */ + 1 29 0x1 0x1>; /* PB29 periph A with pullup */ + }; + + pinctrl_usart1_rts_cts: usart1_rts_cts-0 { + atmel,pins = + <1 26 0x1 0x0 /* PB26 periph A, conflicts with GRX7 */ + 1 27 0x1 0x0>; /* PB27 periph A, conflicts with G125CKO */ + }; + }; + + usart2 { + pinctrl_usart2: usart2-0 { + atmel,pins = + <4 25 0x2 0x0 /* PE25 periph B, conflicts with A25 */ + 4 26 0x2 0x1>; /* PE26 periph B with pullup, conflicts NCS0 */ + }; + + pinctrl_usart2_rts_cts: usart2_rts_cts-0 { + atmel,pins = + <4 23 0x2 0x0 /* PE23 periph B, conflicts with A23 */ + 4 24 0x2 0x0>; /* PE24 periph B, conflicts with A24 */ + }; + }; + + usart3 { + pinctrl_usart3: usart3-0 { + atmel,pins = + <4 18 0x2 0x0 /* PE18 periph B, conflicts with A18 */ + 4 19 0x2 0x1>; /* PE19 periph B with pullup, conflicts with A19 */ + }; + + pinctrl_usart3_rts_cts: usart3_rts_cts-0 { + atmel,pins = + <4 16 0x2 0x0 /* PE16 periph B, conflicts with A16 */ + 4 17 0x2 0x0>; /* PE17 periph B, conflicts with A17 */ + }; + }; + }; + + pmc: pmc@fffffc00 { + compatible = "atmel,at91rm9200-pmc"; + reg = <0xfffffc00 0x120>; + }; + + rstc@fffffe00 { + compatible = "atmel,at91sam9g45-rstc"; + reg = <0xfffffe00 0x10>; + }; + + pit: timer@fffffe30 { + compatible = "atmel,at91sam9260-pit"; + reg = <0xfffffe30 0xf>; + interrupts = <3 4 5>; + }; + + watchdog@fffffe40 { + compatible = "atmel,at91sam9260-wdt"; + reg = <0xfffffe40 0x10>; + status = "disabled"; + }; + + rtc@fffffeb0 { + compatible = "atmel,at91rm9200-rtc"; + reg = <0xfffffeb0 0x30>; + interrupts = <1 4 7>; + }; + }; + + usb0: gadget@00500000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91sam9rl-udc"; + reg = <0x00500000 0x100000 + 0xf8030000 0x4000>; + interrupts = <33 4 2>; + status = "disabled"; + + ep0 { + reg = <0>; + atmel,fifo-size = <64>; + atmel,nb-banks = <1>; + }; + + ep1 { + reg = <1>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep2 { + reg = <2>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep3 { + reg = <3>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-dma; + }; + + ep4 { + reg = <4>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-dma; + }; + + ep5 { + reg = <5>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-dma; + }; + + ep6 { + reg = <6>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-dma; + }; + + ep7 { + reg = <7>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-dma; + }; + + ep8 { + reg = <8>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + }; + + ep9 { + reg = <9>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + }; + + ep10 { + reg = <10>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + }; + + ep11 { + reg = <11>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + }; + + ep12 { + reg = <12>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + }; + + ep13 { + reg = <13>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + }; + + ep14 { + reg = <14>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + }; + + ep15 { + reg = <15>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + }; + }; + + usb1: ohci@00600000 { + compatible = "atmel,at91rm9200-ohci", "usb-ohci"; + reg = <0x00600000 0x100000>; + interrupts = <32 4 2>; + status = "disabled"; + }; + + usb2: ehci@00700000 { + compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; + reg = <0x00700000 0x100000>; + interrupts = <32 4 2>; + status = "disabled"; + }; + + nand0: nand@60000000 { + compatible = "atmel,at91rm9200-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = < 0x60000000 0x01000000 /* EBI CS3 */ + 0xffffc070 0x00000490 /* SMC PMECC regs */ + 0xffffc500 0x00000100 /* SMC PMECC Error Location regs */ + 0x00100000 0x00100000 /* ROM code */ + 0x70000000 0x10000000 /* NFC Command Registers */ + 0xffffc000 0x00000070 /* NFC HSMC regs */ + 0x00200000 0x00100000 /* NFC SRAM banks */ + >; + interrupts = <5 4 6>; + atmel,nand-addr-offset = <21>; + atmel,nand-cmd-offset = <22>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand0_ale_cle>; + atmel,pmecc-lookup-table-offset = <0x10000 0x18000>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/sama5d31ek.dts b/arch/arm/boot/dts/sama5d31ek.dts new file mode 100644 index 000000000000..fa5d216f1db7 --- /dev/null +++ b/arch/arm/boot/dts/sama5d31ek.dts @@ -0,0 +1,51 @@ +/* + * sama5d31ek.dts - Device Tree file for SAMA5D31-EK board + * + * Copyright (C) 2013 Atmel, + * 2013 Ludovic Desroches <ludovic.desroches@atmel.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +/include/ "sama5d3xmb.dtsi" +/include/ "sama5d3xdm.dtsi" + +/ { + model = "Atmel SAMA5D31-EK"; + compatible = "atmel,sama5d31ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5"; + + ahb { + apb { + spi0: spi@f0004000 { + status = "okay"; + }; + + ssc0: ssc@f0008000 { + status = "okay"; + }; + + i2c0: i2c@f0014000 { + status = "okay"; + }; + + i2c1: i2c@f0018000 { + status = "okay"; + }; + + macb1: ethernet@f802c000 { + status = "okay"; + }; + }; + }; + + leds { + d3 { + label = "d3"; + gpios = <&pioE 24 0>; + }; + }; + + sound { + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/sama5d33ek.dts b/arch/arm/boot/dts/sama5d33ek.dts new file mode 100644 index 000000000000..c38c9433d7a5 --- /dev/null +++ b/arch/arm/boot/dts/sama5d33ek.dts @@ -0,0 +1,44 @@ +/* + * sama5d33ek.dts - Device Tree file for SAMA5D33-EK board + * + * Copyright (C) 2013 Atmel, + * 2013 Ludovic Desroches <ludovic.desroches@atmel.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +/include/ "sama5d3xmb.dtsi" +/include/ "sama5d3xdm.dtsi" + +/ { + model = "Atmel SAMA5D33-EK"; + compatible = "atmel,sama5d33ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5"; + + ahb { + apb { + spi0: spi@f0004000 { + status = "okay"; + }; + + ssc0: ssc@f0008000 { + status = "okay"; + }; + + i2c0: i2c@f0014000 { + status = "okay"; + }; + + i2c1: i2c@f0018000 { + status = "okay"; + }; + + macb0: ethernet@f0028000 { + status = "okay"; + }; + }; + }; + + sound { + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/sama5d34ek.dts b/arch/arm/boot/dts/sama5d34ek.dts new file mode 100644 index 000000000000..6bebfcdcb1d1 --- /dev/null +++ b/arch/arm/boot/dts/sama5d34ek.dts @@ -0,0 +1,61 @@ +/* + * sama5d34ek.dts - Device Tree file for SAMA5D34-EK board + * + * Copyright (C) 2013 Atmel, + * 2013 Ludovic Desroches <ludovic.desroches@atmel.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +/include/ "sama5d3xmb.dtsi" +/include/ "sama5d3xdm.dtsi" + +/ { + model = "Atmel SAMA5D34-EK"; + compatible = "atmel,sama5d34ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5"; + + ahb { + apb { + spi0: spi@f0004000 { + status = "okay"; + }; + + ssc0: ssc@f0008000 { + status = "okay"; + }; + + can0: can@f000c000 { + status = "okay"; + }; + + i2c0: i2c@f0014000 { + status = "okay"; + }; + + i2c1: i2c@f0018000 { + status = "okay"; + + 24c256@50 { + compatible = "24c256"; + reg = <0x50>; + pagesize = <64>; + }; + }; + + macb0: ethernet@f0028000 { + status = "okay"; + }; + }; + }; + + leds { + d3 { + label = "d3"; + gpios = <&pioE 24 0>; + }; + }; + + sound { + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/sama5d35ek.dts b/arch/arm/boot/dts/sama5d35ek.dts new file mode 100644 index 000000000000..a488fc4e9777 --- /dev/null +++ b/arch/arm/boot/dts/sama5d35ek.dts @@ -0,0 +1,56 @@ +/* + * sama5d35ek.dts - Device Tree file for SAMA5D35-EK board + * + * Copyright (C) 2013 Atmel, + * 2013 Ludovic Desroches <ludovic.desroches@atmel.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +/include/ "sama5d3xmb.dtsi" + +/ { + model = "Atmel SAMA5D35-EK"; + compatible = "atmel,sama5d35ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5"; + + ahb { + apb { + spi0: spi@f0004000 { + status = "okay"; + }; + + can0: can@f000c000 { + status = "okay"; + }; + + i2c1: i2c@f0018000 { + status = "okay"; + }; + + macb0: ethernet@f0028000 { + status = "okay"; + }; + + isi: isi@f0034000 { + status = "okay"; + }; + + macb1: ethernet@f802c000 { + status = "okay"; + }; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + pb_user1 { + label = "pb_user1"; + gpios = <&pioE 27 0>; + linux,code = <0x100>; + gpio-key,wakeup; + }; + }; +}; diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi new file mode 100644 index 000000000000..1f8ed404626c --- /dev/null +++ b/arch/arm/boot/dts/sama5d3xcm.dtsi @@ -0,0 +1,91 @@ +/* + * sama5d3xcm.dtsi - Device Tree Include file for SAMA5D3x CPU Module + * + * Copyright (C) 2013 Atmel, + * 2013 Ludovic Desroches <ludovic.desroches@atmel.com> + * + * Licensed under GPLv2 or later. + */ +/include/ "sama5d3.dtsi" + +/ { + compatible = "atmel,samad3xcm", "atmel,sama5d3", "atmel,sama5"; + + chosen { + bootargs = "console=ttyS0,115200 rootfstype=ubifs ubi.mtd=5 root=ubi0:rootfs"; + }; + + memory { + reg = <0x20000000 0x20000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock@0 { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <12000000>; + }; + }; + + ahb { + apb { + macb0: ethernet@f0028000 { + phy-mode = "rgmii"; + }; + }; + + nand0: nand@60000000 { + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + atmel,has-pmecc; + atmel,pmecc-cap = <4>; + atmel,pmecc-sector-size = <512>; + atmel,has-nfc; + atmel,use-nfc-sram; + nand-on-flash-bbt; + status = "okay"; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x40000>; + }; + + bootloader@40000 { + label = "bootloader"; + reg = <0x40000 0x80000>; + }; + + bootloaderenv@c0000 { + label = "bootloader env"; + reg = <0xc0000 0xc0000>; + }; + + dtb@180000 { + label = "device tree"; + reg = <0x180000 0x80000>; + }; + + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x600000>; + }; + + rootfs@800000 { + label = "rootfs"; + reg = <0x800000 0x0f800000>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + d2 { + label = "d2"; + gpios = <&pioE 25 1>; /* PE25, conflicts with A25, RXD2 */ + }; + }; +}; diff --git a/arch/arm/boot/dts/sama5d3xdm.dtsi b/arch/arm/boot/dts/sama5d3xdm.dtsi new file mode 100644 index 000000000000..4b8830eb2060 --- /dev/null +++ b/arch/arm/boot/dts/sama5d3xdm.dtsi @@ -0,0 +1,42 @@ +/* + * sama5d3dm.dtsi - Device Tree file for SAMA5 display module + * + * Copyright (C) 2013 Atmel, + * 2013 Ludovic Desroches <ludovic.desroches@atmel.com> + * + * Licensed under GPLv2 or later. + */ + +/ { + ahb { + apb { + i2c1: i2c@f0018000 { + qt1070: keyboard@1b { + compatible = "qt1070"; + reg = <0x1b>; + interrupt-parent = <&pioE>; + interrupts = <31 0x0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qt1070_irq>; + }; + }; + + adc0: adc@f8018000 { + status = "disabled"; + }; + + tsadcc: tsadcc@f8018000 { + status = "okay"; + }; + + pinctrl@fffff200 { + board { + pinctrl_qt1070_irq: qt1070_irq { + atmel,pins = + <4 31 0x0 0x5>; /* PE31 GPIO with pull up deglith */ + }; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi new file mode 100644 index 000000000000..661d7ca9c309 --- /dev/null +++ b/arch/arm/boot/dts/sama5d3xmb.dtsi @@ -0,0 +1,166 @@ +/* + * sama5d3xmb.dts - Device Tree file for SAMA5D3x mother board + * + * Copyright (C) 2013 Atmel, + * 2013 Ludovic Desroches <ludovic.desroches@atmel.com> + * + * Licensed under GPLv2 or later. + */ +/include/ "sama5d3xcm.dtsi" + +/ { + compatible = "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5"; + + ahb { + apb { + mmc0: mmc@f0000000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioD 17 0>; + }; + }; + + spi0: spi@f0004000 { + m25p80@0 { + compatible = "atmel,at25df321a"; + spi-max-frequency = <50000000>; + reg = <0>; + }; + }; + + /* + * i2c0 conflicts with ISI: + * disable it to allow the use of ISI + * can not enable audio when i2c0 disabled + */ + i2c0: i2c@f0014000 { + wm8904: wm8904@1a { + compatible = "wm8904"; + reg = <0x1a>; + }; + }; + + usart1: serial@f0020000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>; + status = "okay"; + }; + + isi: isi@f0034000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_isi &pinctrl_isi_pck_as_mck &pinctrl_isi_power &pinctrl_isi_reset>; + }; + + mmc1: mmc@f8000000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioD 18 0>; + }; + }; + + adc0: adc@f8018000 { + pinctrl-names = "default"; + pinctrl-0 = < + &pinctrl_adc0_adtrg + &pinctrl_adc0_ad0 + &pinctrl_adc0_ad1 + &pinctrl_adc0_ad2 + &pinctrl_adc0_ad3 + &pinctrl_adc0_ad4 + >; + status = "okay"; + }; + + macb1: ethernet@f802c000 { + phy-mode = "rmii"; + }; + + pinctrl@fffff200 { + board { + pinctrl_mmc0_cd: mmc0_cd { + atmel,pins = + <3 17 0x0 0x5>; /* PD17 GPIO with pullup deglitch */ + }; + + pinctrl_mmc1_cd: mmc1_cd { + atmel,pins = + <3 18 0x0 0x5>; /* PD18 GPIO with pullup deglitch */ + }; + + pinctrl_pck0_as_audio_mck: pck0_as_audio_mck { + atmel,pins = + <3 30 0x2 0x0>; /* PD30 periph B */ + }; + + pinctrl_isi_reset: isi_reset-0 { + atmel,pins = + <4 24 0x0 0x0>; /* PE24 gpio */ + }; + + pinctrl_isi_power: isi_power-0 { + atmel,pins = + <4 29 0x0 0x0>; /* PE29 gpio */ + }; + + pinctrl_usba_vbus: usba_vbus { + atmel,pins = + <3 29 0x0 0x4>; /* PD29 GPIO with deglitch */ + }; + }; + }; + + dbgu: serial@ffffee00 { + status = "okay"; + }; + + watchdog@fffffe40 { + status = "okay"; + }; + }; + + usb0: gadget@00500000 { + atmel,vbus-gpio = <&pioD 29 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usba_vbus>; + status = "okay"; + }; + + usb1: ohci@00600000 { + num-ports = <3>; + atmel,vbus-gpio = <&pioD 25 0 + &pioD 26 1 + &pioD 27 1 + >; + status = "okay"; + }; + + usb2: ehci@00700000 { + status = "okay"; + }; + }; + + sound { + compatible = "atmel,sama5d3ek-wm8904"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pck0_as_audio_mck>; + + atmel,model = "wm8904 @ SAMA5D3EK"; + atmel,audio-routing = + "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "IN2L", "Line In Jack", + "IN2R", "Line In Jack", + "IN1L", "Mic"; + + atmel,ssc-controller = <&ssc0>; + atmel,audio-codec = <&wm8904>; + }; +}; diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts new file mode 100644 index 000000000000..5972abb55f9c --- /dev/null +++ b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts @@ -0,0 +1,79 @@ +/* + * Device Tree Source for the KZM-A9-GT board + * + * Copyright (C) 2012 Horms Solutions Ltd. + * + * Based on sh73a0-kzm9g.dts + * Copyright (C) 2012 Renesas Solutions Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +/include/ "sh73a0.dtsi" + +/ { + model = "KZM-A9-GT"; + compatible = "renesas,kzm9g-reference", "renesas,sh73a0"; + + chosen { + bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel earlyprintk=sh-sci.4,115200"; + }; + + memory { + device_type = "memory"; + reg = <0x41000000 0x1e800000>; + }; + + reg_1p8v: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_3p3v: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + lan9220@10000000 { + compatible = "smsc,lan9220", "smsc,lan9115"; + reg = <0x10000000 0x100>; + phy-mode = "mii"; + interrupt-parent = <&irqpin0>; + interrupts = <3 0>; /* active low */ + reg-io-width = <4>; + smsc,irq-push-pull; + smsc,save-mac-address; + vddvario-supply = <®_1p8v>; + vdd33a-supply = <®_3p3v>; + }; +}; + +&mmcif { + bus-width = <8>; + vmmc-supply = <®_1p8v>; + status = "okay"; +}; + +&sdhi0 { + vmmc-supply = <®_3p3v>; + bus-width = <4>; + status = "okay"; +}; + +&sdhi2 { + vmmc-supply = <®_3p3v>; + bus-width = <4>; + broken-cd; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sh73a0-reference.dtsi b/arch/arm/boot/dts/sh73a0-reference.dtsi deleted file mode 100644 index d4bb0125b2b2..000000000000 --- a/arch/arm/boot/dts/sh73a0-reference.dtsi +++ /dev/null @@ -1,24 +0,0 @@ -/* - * Device Tree Source for the SH73A0 SoC - * - * Copyright (C) 2012 Renesas Solutions Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -/include/ "sh73a0.dtsi" - -/ { - compatible = "renesas,sh73a0"; - - mmcif: mmcif@0x10010000 { - compatible = "renesas,sh-mmcif"; - reg = <0xe6bd0000 0x100>; - interrupt-parent = <&gic>; - interrupts = <0 140 0x4 - 0 141 0x4>; - reg-io-width = <4>; - }; -}; diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index 8a59465d0231..ec40bf78289e 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -38,6 +38,87 @@ <0xf0000100 0x100>; }; + irqpin0: irqpin@e6900000 { + compatible = "renesas,intc-irqpin"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0xe6900000 4>, + <0xe6900010 4>, + <0xe6900020 1>, + <0xe6900040 1>, + <0xe6900060 1>; + interrupt-parent = <&gic>; + interrupts = <0 1 0x4 + 0 2 0x4 + 0 3 0x4 + 0 4 0x4 + 0 5 0x4 + 0 6 0x4 + 0 7 0x4 + 0 8 0x4>; + }; + + irqpin1: irqpin@e6900004 { + compatible = "renesas,intc-irqpin"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0xe6900004 4>, + <0xe6900014 4>, + <0xe6900024 1>, + <0xe6900044 1>, + <0xe6900064 1>; + interrupt-parent = <&gic>; + interrupts = <0 9 0x4 + 0 10 0x4 + 0 11 0x4 + 0 12 0x4 + 0 13 0x4 + 0 14 0x4 + 0 15 0x4 + 0 16 0x4>; + control-parent; + }; + + irqpin2: irqpin@e6900008 { + compatible = "renesas,intc-irqpin"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0xe6900008 4>, + <0xe6900018 4>, + <0xe6900028 1>, + <0xe6900048 1>, + <0xe6900068 1>; + interrupt-parent = <&gic>; + interrupts = <0 17 0x4 + 0 18 0x4 + 0 19 0x4 + 0 20 0x4 + 0 21 0x4 + 0 22 0x4 + 0 23 0x4 + 0 24 0x4>; + }; + + irqpin3: irqpin@e690000c { + compatible = "renesas,intc-irqpin"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0xe690000c 4>, + <0xe690001c 4>, + <0xe690002c 1>, + <0xe690004c 1>, + <0xe690006c 1>; + interrupt-parent = <&gic>; + interrupts = <0 25 0x4 + 0 26 0x4 + 0 27 0x4 + 0 28 0x4 + 0 29 0x4 + 0 30 0x4 + 0 31 0x4 + 0 32 0x4>; + }; + i2c0: i2c@0xe6820000 { #address-cells = <1>; #size-cells = <0>; @@ -97,4 +178,48 @@ 0 189 0x4 0 190 0x4>; }; + + mmcif: mmcif@0x10010000 { + compatible = "renesas,sh-mmcif"; + reg = <0xe6bd0000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 140 0x4 + 0 141 0x4>; + reg-io-width = <4>; + status = "disabled"; + }; + + sdhi0: sdhi@0xee100000 { + compatible = "renesas,r8a7740-sdhi"; + reg = <0xee100000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 83 4 + 0 84 4 + 0 85 4>; + cap-sd-highspeed; + status = "disabled"; + }; + + /* SDHI1 and SDHI2 have no CD pins, no need for CD IRQ */ + sdhi1: sdhi@0xee120000 { + compatible = "renesas,r8a7740-sdhi"; + reg = <0xee120000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 88 4 + 0 89 4>; + toshiba,mmc-wrprotect-disable; + cap-sd-highspeed; + status = "disabled"; + }; + + sdhi2: sdhi@0xee140000 { + compatible = "renesas,r8a7740-sdhi"; + reg = <0xee140000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 104 4 + 0 105 4>; + toshiba,mmc-wrprotect-disable; + cap-sd-highspeed; + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/skeleton64.dtsi b/arch/arm/boot/dts/skeleton64.dtsi new file mode 100644 index 000000000000..15994158a998 --- /dev/null +++ b/arch/arm/boot/dts/skeleton64.dtsi @@ -0,0 +1,13 @@ +/* + * Skeleton device tree in the 64 bits version; the bare minimum + * needed to boot; just include and add a compatible value. The + * bootloader will typically populate the memory node. + */ + +/ { + #address-cells = <2>; + #size-cells = <2>; + chosen { }; + aliases { }; + memory { device_type = "memory"; reg = <0 0>; }; +}; diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts index d3ec32f6b790..db5db24fd544 100644 --- a/arch/arm/boot/dts/snowball.dts +++ b/arch/arm/boot/dts/snowball.dts @@ -299,6 +299,10 @@ }; ab8500 { + ab8500-gpio { + compatible = "stericsson,ab8500-gpio"; + }; + ab8500-regulators { ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { regulator-name = "V-DISPLAY"; diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 7e8769bd5977..16a6e13e08b4 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -81,6 +81,163 @@ }; }; + clkmgr@ffd04000 { + compatible = "altr,clk-mgr"; + reg = <0xffd04000 0x1000>; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + osc: osc1 { + #clock-cells = <0>; + compatible = "fixed-clock"; + }; + + main_pll: main_pll { + #address-cells = <1>; + #size-cells = <0>; + #clock-cells = <0>; + compatible = "altr,socfpga-pll-clock"; + clocks = <&osc>; + reg = <0x40>; + + mpuclk: mpuclk { + #clock-cells = <0>; + compatible = "altr,socfpga-perip-clk"; + clocks = <&main_pll>; + fixed-divider = <2>; + reg = <0x48>; + }; + + mainclk: mainclk { + #clock-cells = <0>; + compatible = "altr,socfpga-perip-clk"; + clocks = <&main_pll>; + fixed-divider = <4>; + reg = <0x4C>; + }; + + dbg_base_clk: dbg_base_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-perip-clk"; + clocks = <&main_pll>; + fixed-divider = <4>; + reg = <0x50>; + }; + + main_qspi_clk: main_qspi_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-perip-clk"; + clocks = <&main_pll>; + reg = <0x54>; + }; + + main_nand_sdmmc_clk: main_nand_sdmmc_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-perip-clk"; + clocks = <&main_pll>; + reg = <0x58>; + }; + + cfg_s2f_usr0_clk: cfg_s2f_usr0_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-perip-clk"; + clocks = <&main_pll>; + reg = <0x5C>; + }; + }; + + periph_pll: periph_pll { + #address-cells = <1>; + #size-cells = <0>; + #clock-cells = <0>; + compatible = "altr,socfpga-pll-clock"; + clocks = <&osc>; + reg = <0x80>; + + emac0_clk: emac0_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-perip-clk"; + clocks = <&periph_pll>; + reg = <0x88>; + }; + + emac1_clk: emac1_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-perip-clk"; + clocks = <&periph_pll>; + reg = <0x8C>; + }; + + per_qspi_clk: per_qsi_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-perip-clk"; + clocks = <&periph_pll>; + reg = <0x90>; + }; + + per_nand_mmc_clk: per_nand_mmc_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-perip-clk"; + clocks = <&periph_pll>; + reg = <0x94>; + }; + + per_base_clk: per_base_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-perip-clk"; + clocks = <&periph_pll>; + reg = <0x98>; + }; + + s2f_usr1_clk: s2f_usr1_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-perip-clk"; + clocks = <&periph_pll>; + reg = <0x9C>; + }; + }; + + sdram_pll: sdram_pll { + #address-cells = <1>; + #size-cells = <0>; + #clock-cells = <0>; + compatible = "altr,socfpga-pll-clock"; + clocks = <&osc>; + reg = <0xC0>; + + ddr_dqs_clk: ddr_dqs_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-perip-clk"; + clocks = <&sdram_pll>; + reg = <0xC8>; + }; + + ddr_2x_dqs_clk: ddr_2x_dqs_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-perip-clk"; + clocks = <&sdram_pll>; + reg = <0xCC>; + }; + + ddr_dq_clk: ddr_dq_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-perip-clk"; + clocks = <&sdram_pll>; + reg = <0xD0>; + }; + + s2f_usr2_clk: s2f_usr2_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-perip-clk"; + clocks = <&sdram_pll>; + reg = <0xD4>; + }; + }; + }; + }; + gmac0: stmmac@ff700000 { compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac"; reg = <0xff700000 0x2000>; diff --git a/arch/arm/boot/dts/socfpga_cyclone5.dts b/arch/arm/boot/dts/socfpga_cyclone5.dts index 3ae8a83a0875..2495958f1016 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5.dts @@ -33,6 +33,14 @@ }; soc { + clkmgr@ffd04000 { + clocks { + osc1 { + clock-frequency = <25000000>; + }; + }; + }; + timer0@ffc08000 { clock-frequency = <100000000>; }; diff --git a/arch/arm/boot/dts/socfpga_vt.dts b/arch/arm/boot/dts/socfpga_vt.dts index 1036eba40bbf..0bf035d607f0 100644 --- a/arch/arm/boot/dts/socfpga_vt.dts +++ b/arch/arm/boot/dts/socfpga_vt.dts @@ -33,6 +33,14 @@ }; soc { + clkmgr@ffd04000 { + clocks { + osc1 { + clock-frequency = <10000000>; + }; + }; + }; + timer0@ffc08000 { clock-frequency = <7000000>; }; diff --git a/arch/arm/boot/dts/spear1310.dtsi b/arch/arm/boot/dts/spear1310.dtsi index 1513c1927cc8..122ae94076c8 100644 --- a/arch/arm/boot/dts/spear1310.dtsi +++ b/arch/arm/boot/dts/spear1310.dtsi @@ -89,7 +89,7 @@ pinmux: pinmux@e0700000 { compatible = "st,spear1310-pinmux"; reg = <0xe0700000 0x1000>; - #gpio-range-cells = <2>; + #gpio-range-cells = <3>; }; apb { @@ -212,7 +212,7 @@ interrupt-controller; gpio-controller; #gpio-cells = <2>; - gpio-ranges = <&pinmux 0 246>; + gpio-ranges = <&pinmux 0 0 246>; status = "disabled"; st-plgpio,ngpio = <246>; diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi index 34da11aa6795..54d128d35681 100644 --- a/arch/arm/boot/dts/spear1340.dtsi +++ b/arch/arm/boot/dts/spear1340.dtsi @@ -63,7 +63,7 @@ pinmux: pinmux@e0700000 { compatible = "st,spear1340-pinmux"; reg = <0xe0700000 0x1000>; - #gpio-range-cells = <2>; + #gpio-range-cells = <3>; }; pwm: pwm@e0180000 { @@ -113,6 +113,9 @@ reg = <0xb4100000 0x1000>; interrupts = <0 105 0x4>; status = "disabled"; + dmas = <&dwdma0 0x600 0 0 1>, /* 0xC << 11 */ + <&dwdma0 0x680 0 1 0>; /* 0xD << 7 */ + dma-names = "tx", "rx"; }; thermal@e07008c4 { @@ -127,7 +130,7 @@ interrupt-controller; gpio-controller; #gpio-cells = <2>; - gpio-ranges = <&pinmux 0 252>; + gpio-ranges = <&pinmux 0 0 252>; status = "disabled"; st-plgpio,ngpio = <250>; diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi index b4ca60f4eb42..45597fd91050 100644 --- a/arch/arm/boot/dts/spear13xx.dtsi +++ b/arch/arm/boot/dts/spear13xx.dtsi @@ -98,13 +98,24 @@ reg = <0xb2800000 0x1000>; interrupts = <0 29 0x4>; status = "disabled"; + dmas = <&dwdma0 0 0 0 0>; + dma-names = "data"; }; - dma@ea800000 { + dwdma0: dma@ea800000 { compatible = "snps,dma-spear1340"; reg = <0xea800000 0x1000>; interrupts = <0 19 0x4>; status = "disabled"; + + dma-channels = <8>; + #dma-cells = <3>; + dma-requests = <32>; + chan_allocation_order = <1>; + chan_priority = <1>; + block_size = <0xfff>; + dma-masters = <2>; + data_width = <3 3 0 0>; }; dma@eb000000 { @@ -112,6 +123,15 @@ reg = <0xeb000000 0x1000>; interrupts = <0 59 0x4>; status = "disabled"; + + dma-requests = <32>; + dma-channels = <8>; + dma-masters = <2>; + #dma-cells = <3>; + chan_allocation_order = <1>; + chan_priority = <1>; + block_size = <0xfff>; + data_width = <3 3 0 0>; }; fsmc: flash@b0000000 { @@ -261,6 +281,9 @@ #size-cells = <0>; interrupts = <0 31 0x4>; status = "disabled"; + dmas = <&dwdma0 0x2000 0 0 0>, /* 0x4 << 11 */ + <&dwdma0 0x0280 0 0 0>; /* 0x5 << 7 */ + dma-names = "tx", "rx"; }; rtc@e0580000 { diff --git a/arch/arm/boot/dts/spear310.dtsi b/arch/arm/boot/dts/spear310.dtsi index ab45b8c81982..95372080eea6 100644 --- a/arch/arm/boot/dts/spear310.dtsi +++ b/arch/arm/boot/dts/spear310.dtsi @@ -25,7 +25,7 @@ pinmux: pinmux@b4000000 { compatible = "st,spear310-pinmux"; reg = <0xb4000000 0x1000>; - #gpio-range-cells = <2>; + #gpio-range-cells = <3>; }; fsmc: flash@44000000 { @@ -102,7 +102,7 @@ interrupt-controller; gpio-controller; #gpio-cells = <2>; - gpio-ranges = <&pinmux 0 102>; + gpio-ranges = <&pinmux 0 0 102>; status = "disabled"; st-plgpio,ngpio = <102>; diff --git a/arch/arm/boot/dts/spear320.dtsi b/arch/arm/boot/dts/spear320.dtsi index caa5520b1fd4..ffea342aeec9 100644 --- a/arch/arm/boot/dts/spear320.dtsi +++ b/arch/arm/boot/dts/spear320.dtsi @@ -24,7 +24,7 @@ pinmux: pinmux@b3000000 { compatible = "st,spear320-pinmux"; reg = <0xb3000000 0x1000>; - #gpio-range-cells = <2>; + #gpio-range-cells = <3>; }; clcd@90000000 { @@ -130,7 +130,7 @@ interrupt-controller; gpio-controller; #gpio-cells = <2>; - gpio-ranges = <&pinmux 0 102>; + gpio-ranges = <&pinmux 0 0 102>; status = "disabled"; st-plgpio,ngpio = <102>; diff --git a/arch/arm/boot/dts/stuib.dtsi b/arch/arm/boot/dts/stuib.dtsi index 39446a247e79..615392a75676 100644 --- a/arch/arm/boot/dts/stuib.dtsi +++ b/arch/arm/boot/dts/stuib.dtsi @@ -15,7 +15,7 @@ stmpe1601: stmpe1601@40 { compatible = "st,stmpe1601"; reg = <0x40>; - interrupts = <26 0x1>; + interrupts = <26 0x2>; interrupt-parent = <&gpio6>; interrupt-controller; diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts index 5cab82540437..b70fe0db6bb7 100644 --- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts @@ -26,13 +26,37 @@ bootargs = "earlyprintk console=ttyS0,115200"; }; - soc { - uart0: uart@01c28000 { - status = "okay"; + soc@01c20000 { + pinctrl@01c20800 { + led_pins_cubieboard: led_pins@0 { + allwinner,pins = "PH20", "PH21"; + allwinner,function = "gpio_out"; + allwinner,drive = <1>; + allwinner,pull = <0>; + }; }; - uart1: uart@01c28400 { + uart0: serial@01c28000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; status = "okay"; }; }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_cubieboard>; + + blue { + label = "cubieboard::blue"; + gpios = <&pio 7 21 0>; /* LED1 */ + }; + + green { + label = "cubieboard::green"; + gpios = <&pio 7 20 0>; /* LED2 */ + linux,default-trigger = "heartbeat"; + }; + }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts index f84549ad791e..b9efac100c85 100644 --- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts +++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts @@ -22,8 +22,10 @@ bootargs = "earlyprintk console=ttyS0,115200"; }; - soc { - uart0: uart@01c28000 { + soc@01c20000 { + uart0: serial@01c28000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts new file mode 100644 index 000000000000..4a7c35d6726a --- /dev/null +++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts @@ -0,0 +1,32 @@ +/* + * Copyright 2012 Maxime Ripard + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "sun4i-a10.dtsi" + +/ { + model = "PineRiver Mini X-Plus"; + compatible = "pineriver,mini-xplus", "allwinner,sun4i-a10"; + + chosen { + bootargs = "earlyprintk console=ttyS0,115200"; + }; + + soc { + uart0: uart@01c28000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index f99f60dadf5d..e7ef619a70a2 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -10,19 +10,174 @@ * http://www.gnu.org/copyleft/gpl.html */ -/include/ "sunxi.dtsi" +/include/ "skeleton.dtsi" / { + interrupt-parent = <&intc>; + + cpus { + cpu@0 { + compatible = "arm,cortex-a8"; + }; + }; + memory { reg = <0x40000000 0x80000000>; }; - soc { - pinctrl@01c20800 { + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* + * This is a dummy clock, to be used as placeholder on + * other mux clocks when a specific parent clock is not + * yet implemented. It should be dropped when the driver + * is complete. + */ + dummy: dummy { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + + osc24M: osc24M@01c20050 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-osc-clk"; + reg = <0x01c20050 0x4>; + clock-frequency = <24000000>; + }; + + osc32k: osc32k { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + + pll1: pll1@01c20000 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-pll1-clk"; + reg = <0x01c20000 0x4>; + clocks = <&osc24M>; + }; + + /* dummy is 200M */ + cpu: cpu@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-cpu-clk"; + reg = <0x01c20054 0x4>; + clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>; + }; + + axi: axi@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-axi-clk"; + reg = <0x01c20054 0x4>; + clocks = <&cpu>; + }; + + axi_gates: axi_gates@01c2005c { + #clock-cells = <1>; + compatible = "allwinner,sun4i-axi-gates-clk"; + reg = <0x01c2005c 0x4>; + clocks = <&axi>; + clock-output-names = "axi_dram"; + }; + + ahb: ahb@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-ahb-clk"; + reg = <0x01c20054 0x4>; + clocks = <&axi>; + }; + + ahb_gates: ahb_gates@01c20060 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-ahb-gates-clk"; + reg = <0x01c20060 0x8>; + clocks = <&ahb>; + clock-output-names = "ahb_usb0", "ahb_ehci0", + "ahb_ohci0", "ahb_ehci1", "ahb_ohci1", "ahb_ss", + "ahb_dma", "ahb_bist", "ahb_mmc0", "ahb_mmc1", + "ahb_mmc2", "ahb_mmc3", "ahb_ms", "ahb_nand", + "ahb_sdram", "ahb_ace", "ahb_emac", "ahb_ts", + "ahb_spi0", "ahb_spi1", "ahb_spi2", "ahb_spi3", + "ahb_pata", "ahb_sata", "ahb_gps", "ahb_ve", + "ahb_tvd", "ahb_tve0", "ahb_tve1", "ahb_lcd0", + "ahb_lcd1", "ahb_csi0", "ahb_csi1", "ahb_hdmi", + "ahb_de_be0", "ahb_de_be1", "ahb_de_fe0", + "ahb_de_fe1", "ahb_mp", "ahb_mali400"; + }; + + apb0: apb0@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-apb0-clk"; + reg = <0x01c20054 0x4>; + clocks = <&ahb>; + }; + + apb0_gates: apb0_gates@01c20068 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-apb0-gates-clk"; + reg = <0x01c20068 0x4>; + clocks = <&apb0>; + clock-output-names = "apb0_codec", "apb0_spdif", + "apb0_ac97", "apb0_iis", "apb0_pio", "apb0_ir0", + "apb0_ir1", "apb0_keypad"; + }; + + /* dummy is pll62 */ + apb1_mux: apb1_mux@01c20058 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-apb1-mux-clk"; + reg = <0x01c20058 0x4>; + clocks = <&osc24M>, <&dummy>, <&osc32k>; + }; + + apb1: apb1@01c20058 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-apb1-clk"; + reg = <0x01c20058 0x4>; + clocks = <&apb1_mux>; + }; + + apb1_gates: apb1_gates@01c2006c { + #clock-cells = <1>; + compatible = "allwinner,sun4i-apb1-gates-clk"; + reg = <0x01c2006c 0x4>; + clocks = <&apb1>; + clock-output-names = "apb1_i2c0", "apb1_i2c1", + "apb1_i2c2", "apb1_can", "apb1_scr", + "apb1_ps20", "apb1_ps21", "apb1_uart0", + "apb1_uart1", "apb1_uart2", "apb1_uart3", + "apb1_uart4", "apb1_uart5", "apb1_uart6", + "apb1_uart7"; + }; + }; + + soc@01c20000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x01c20000 0x300000>; + ranges; + + intc: interrupt-controller@01c20400 { + compatible = "allwinner,sun4i-ic"; + reg = <0x01c20400 0x400>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + pio: pinctrl@01c20800 { compatible = "allwinner,sun4i-a10-pinctrl"; reg = <0x01c20800 0x400>; + clocks = <&apb0_gates 5>; + gpio-controller; #address-cells = <1>; #size-cells = <0>; + #gpio-cells = <3>; uart0_pins_a: uart0@0 { allwinner,pins = "PB22", "PB23"; @@ -45,5 +200,97 @@ allwinner,pull = <0>; }; }; + + timer@01c20c00 { + compatible = "allwinner,sun4i-timer"; + reg = <0x01c20c00 0x90>; + interrupts = <22>; + clocks = <&osc24M>; + }; + + wdt: watchdog@01c20c90 { + compatible = "allwinner,sun4i-wdt"; + reg = <0x01c20c90 0x10>; + }; + + uart0: serial@01c28000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28000 0x400>; + interrupts = <1>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb1_gates 16>; + status = "disabled"; + }; + + uart1: serial@01c28400 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28400 0x400>; + interrupts = <2>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb1_gates 17>; + status = "disabled"; + }; + + uart2: serial@01c28800 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28800 0x400>; + interrupts = <3>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb1_gates 18>; + status = "disabled"; + }; + + uart3: serial@01c28c00 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28c00 0x400>; + interrupts = <4>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb1_gates 19>; + status = "disabled"; + }; + + uart4: serial@01c29000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c29000 0x400>; + interrupts = <17>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb1_gates 20>; + status = "disabled"; + }; + + uart5: serial@01c29400 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c29400 0x400>; + interrupts = <18>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb1_gates 21>; + status = "disabled"; + }; + + uart6: serial@01c29800 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c29800 0x400>; + interrupts = <19>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb1_gates 22>; + status = "disabled"; + }; + + uart7: serial@01c29c00 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c29c00 0x400>; + interrupts = <20>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb1_gates 23>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts index 4a1e45d4aace..3ca55067f868 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts @@ -22,11 +22,31 @@ bootargs = "earlyprintk console=ttyS0,115200"; }; - soc { - uart1: uart@01c28400 { + soc@01c20000 { + pinctrl@01c20800 { + led_pins_olinuxino: led_pins@0 { + allwinner,pins = "PG9"; + allwinner,function = "gpio_out"; + allwinner,drive = <1>; + allwinner,pull = <0>; + }; + }; + + uart1: serial@01c28400 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins_b>; status = "okay"; }; }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_olinuxino>; + + power { + gpios = <&pio 6 9 0>; + default-state = "on"; + }; + }; }; diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index e1121890fb29..31fa38f8cc98 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -11,19 +11,174 @@ * http://www.gnu.org/copyleft/gpl.html */ -/include/ "sunxi.dtsi" +/include/ "skeleton.dtsi" / { + interrupt-parent = <&intc>; + + cpus { + cpu@0 { + compatible = "arm,cortex-a8"; + }; + }; + memory { reg = <0x40000000 0x20000000>; }; - soc { - pinctrl@01c20800 { + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* + * This is a dummy clock, to be used as placeholder on + * other mux clocks when a specific parent clock is not + * yet implemented. It should be dropped when the driver + * is complete. + */ + dummy: dummy { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + + osc24M: osc24M@01c20050 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-osc-clk"; + reg = <0x01c20050 0x4>; + clock-frequency = <24000000>; + }; + + osc32k: osc32k { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + + pll1: pll1@01c20000 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-pll1-clk"; + reg = <0x01c20000 0x4>; + clocks = <&osc24M>; + }; + + /* dummy is 200M */ + cpu: cpu@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-cpu-clk"; + reg = <0x01c20054 0x4>; + clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>; + }; + + axi: axi@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-axi-clk"; + reg = <0x01c20054 0x4>; + clocks = <&cpu>; + }; + + axi_gates: axi_gates@01c2005c { + #clock-cells = <1>; + compatible = "allwinner,sun4i-axi-gates-clk"; + reg = <0x01c2005c 0x4>; + clocks = <&axi>; + clock-output-names = "axi_dram"; + }; + + ahb: ahb@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-ahb-clk"; + reg = <0x01c20054 0x4>; + clocks = <&axi>; + }; + + ahb_gates: ahb_gates@01c20060 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-ahb-gates-clk"; + reg = <0x01c20060 0x8>; + clocks = <&ahb>; + clock-output-names = "ahb_usb0", "ahb_ehci0", + "ahb_ohci0", "ahb_ehci1", "ahb_ohci1", "ahb_ss", + "ahb_dma", "ahb_bist", "ahb_mmc0", "ahb_mmc1", + "ahb_mmc2", "ahb_mmc3", "ahb_ms", "ahb_nand", + "ahb_sdram", "ahb_ace", "ahb_emac", "ahb_ts", + "ahb_spi0", "ahb_spi1", "ahb_spi2", "ahb_spi3", + "ahb_pata", "ahb_sata", "ahb_gps", "ahb_ve", + "ahb_tvd", "ahb_tve0", "ahb_tve1", "ahb_lcd0", + "ahb_lcd1", "ahb_csi0", "ahb_csi1", "ahb_hdmi", + "ahb_de_be0", "ahb_de_be1", "ahb_de_fe0", + "ahb_de_fe1", "ahb_mp", "ahb_mali400"; + }; + + apb0: apb0@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-apb0-clk"; + reg = <0x01c20054 0x4>; + clocks = <&ahb>; + }; + + apb0_gates: apb0_gates@01c20068 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-apb0-gates-clk"; + reg = <0x01c20068 0x4>; + clocks = <&apb0>; + clock-output-names = "apb0_codec", "apb0_spdif", + "apb0_ac97", "apb0_iis", "apb0_pio", "apb0_ir0", + "apb0_ir1", "apb0_keypad"; + }; + + /* dummy is pll62 */ + apb1_mux: apb1_mux@01c20058 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-apb1-mux-clk"; + reg = <0x01c20058 0x4>; + clocks = <&osc24M>, <&dummy>, <&osc32k>; + }; + + apb1: apb1@01c20058 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-apb1-clk"; + reg = <0x01c20058 0x4>; + clocks = <&apb1_mux>; + }; + + apb1_gates: apb1_gates@01c2006c { + #clock-cells = <1>; + compatible = "allwinner,sun4i-apb1-gates-clk"; + reg = <0x01c2006c 0x4>; + clocks = <&apb1>; + clock-output-names = "apb1_i2c0", "apb1_i2c1", + "apb1_i2c2", "apb1_can", "apb1_scr", + "apb1_ps20", "apb1_ps21", "apb1_uart0", + "apb1_uart1", "apb1_uart2", "apb1_uart3", + "apb1_uart4", "apb1_uart5", "apb1_uart6", + "apb1_uart7"; + }; + }; + + soc@01c20000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x01c20000 0x300000>; + ranges; + + intc: interrupt-controller@01c20400 { + compatible = "allwinner,sun4i-ic"; + reg = <0x01c20400 0x400>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + pio: pinctrl@01c20800 { compatible = "allwinner,sun5i-a13-pinctrl"; reg = <0x01c20800 0x400>; + clocks = <&apb0_gates 5>; + gpio-controller; #address-cells = <1>; #size-cells = <0>; + #gpio-cells = <3>; uart1_pins_a: uart1@0 { allwinner,pins = "PE10", "PE11"; @@ -39,5 +194,37 @@ allwinner,pull = <0>; }; }; + + timer@01c20c00 { + compatible = "allwinner,sun4i-timer"; + reg = <0x01c20c00 0x90>; + interrupts = <22>; + clocks = <&osc24M>; + }; + + wdt: watchdog@01c20c90 { + compatible = "allwinner,sun4i-wdt"; + reg = <0x01c20c90 0x10>; + }; + + uart1: serial@01c28400 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28400 0x400>; + interrupts = <2>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb1_gates 17>; + status = "disabled"; + }; + + uart3: serial@01c28c00 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28c00 0x400>; + interrupts = <4>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb1_gates 19>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/sunxi.dtsi b/arch/arm/boot/dts/sunxi.dtsi deleted file mode 100644 index 8b36abea9f2e..000000000000 --- a/arch/arm/boot/dts/sunxi.dtsi +++ /dev/null @@ -1,82 +0,0 @@ -/* - * Copyright 2012 Maxime Ripard - * - * Maxime Ripard <maxime.ripard@free-electrons.com> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -/include/ "skeleton.dtsi" - -/ { - interrupt-parent = <&intc>; - - cpus { - cpu@0 { - compatible = "arm,cortex-a8"; - }; - }; - - clocks { - #address-cells = <1>; - #size-cells = <0>; - - osc: oscillator { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <24000000>; - }; - }; - - soc { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x01c20000 0x300000>; - ranges; - - timer@01c20c00 { - compatible = "allwinner,sunxi-timer"; - reg = <0x01c20c00 0x90>; - interrupts = <22>; - clocks = <&osc>; - }; - - wdt: watchdog@01c20c90 { - compatible = "allwinner,sunxi-wdt"; - reg = <0x01c20c90 0x10>; - }; - - intc: interrupt-controller@01c20400 { - compatible = "allwinner,sunxi-ic"; - reg = <0x01c20400 0x400>; - interrupt-controller; - #interrupt-cells = <1>; - }; - - uart0: uart@01c28000 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c28000 0x400>; - interrupts = <1>; - reg-shift = <2>; - reg-io-width = <4>; - clock-frequency = <24000000>; - status = "disabled"; - }; - - uart1: uart@01c28400 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c28400 0x400>; - interrupts = <2>; - reg-shift = <2>; - reg-io-width = <4>; - clock-frequency = <24000000>; - status = "disabled"; - }; - }; -}; diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts index a30aca62658a..72c1f27af7f3 100644 --- a/arch/arm/boot/dts/tegra114-dalmore.dts +++ b/arch/arm/boot/dts/tegra114-dalmore.dts @@ -10,12 +10,915 @@ reg = <0x80000000 0x40000000>; }; + pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + clk1_out_pw4 { + nvidia,pins = "clk1_out_pw4"; + nvidia,function = "extperiph1"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + dap1_din_pn1 { + nvidia,pins = "dap1_din_pn1"; + nvidia,function = "i2s0"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + nvidia,enable-input = <1>; + }; + dap1_dout_pn2 { + nvidia,pins = "dap1_dout_pn2", + "dap1_fs_pn0", + "dap1_sclk_pn3"; + nvidia,function = "i2s0"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + dap2_din_pa4 { + nvidia,pins = "dap2_din_pa4"; + nvidia,function = "i2s1"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + nvidia,enable-input = <1>; + }; + dap2_dout_pa5 { + nvidia,pins = "dap2_dout_pa5", + "dap2_fs_pa2", + "dap2_sclk_pa3"; + nvidia,function = "i2s1"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + dap4_din_pp5 { + nvidia,pins = "dap4_din_pp5", + "dap4_dout_pp6", + "dap4_fs_pp4", + "dap4_sclk_pp7"; + nvidia,function = "i2s3"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + dvfs_pwm_px0 { + nvidia,pins = "dvfs_pwm_px0", + "dvfs_clk_px2"; + nvidia,function = "cldvfs"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + ulpi_clk_py0 { + nvidia,pins = "ulpi_clk_py0", + "ulpi_data0_po1", + "ulpi_data1_po2", + "ulpi_data2_po3", + "ulpi_data3_po4", + "ulpi_data4_po5", + "ulpi_data5_po6", + "ulpi_data6_po7", + "ulpi_data7_po0"; + nvidia,function = "ulpi"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + ulpi_dir_py1 { + nvidia,pins = "ulpi_dir_py1", + "ulpi_nxt_py2"; + nvidia,function = "ulpi"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + nvidia,enable-input = <1>; + }; + ulpi_stp_py3 { + nvidia,pins = "ulpi_stp_py3"; + nvidia,function = "ulpi"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + cam_i2c_scl_pbb1 { + nvidia,pins = "cam_i2c_scl_pbb1", + "cam_i2c_sda_pbb2"; + nvidia,function = "i2c3"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + nvidia,lock = <0>; + nvidia,open-drain = <0>; + }; + cam_mclk_pcc0 { + nvidia,pins = "cam_mclk_pcc0", + "pbb0"; + nvidia,function = "vi_alt3"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + nvidia,lock = <0>; + }; + gen2_i2c_scl_pt5 { + nvidia,pins = "gen2_i2c_scl_pt5", + "gen2_i2c_sda_pt6"; + nvidia,function = "i2c2"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + nvidia,lock = <0>; + nvidia,open-drain = <0>; + }; + gmi_a16_pj7 { + nvidia,pins = "gmi_a16_pj7"; + nvidia,function = "uartd"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + gmi_a17_pb0 { + nvidia,pins = "gmi_a17_pb0", + "gmi_a18_pb1"; + nvidia,function = "uartd"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + nvidia,enable-input = <1>; + }; + gmi_a19_pk7 { + nvidia,pins = "gmi_a19_pk7"; + nvidia,function = "uartd"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + gmi_ad5_pg5 { + nvidia,pins = "gmi_ad5_pg5", + "gmi_cs6_n_pi3", + "gmi_wr_n_pi0"; + nvidia,function = "spi4"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + gmi_ad6_pg6 { + nvidia,pins = "gmi_ad6_pg6", + "gmi_ad7_pg7"; + nvidia,function = "spi4"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + gmi_ad12_ph4 { + nvidia,pins = "gmi_ad12_ph4"; + nvidia,function = "rsvd4"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + gmi_ad9_ph1 { + nvidia,pins = "gmi_ad9_ph1"; + nvidia,function = "pwm1"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + gmi_cs1_n_pj2 { + nvidia,pins = "gmi_cs1_n_pj2", + "gmi_oe_n_pi1"; + nvidia,function = "soc"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + nvidia,enable-input = <1>; + }; + clk2_out_pw5 { + nvidia,pins = "clk2_out_pw5"; + nvidia,function = "extperiph2"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + sdmmc1_clk_pz0 { + nvidia,pins = "sdmmc1_clk_pz0"; + nvidia,function = "sdmmc1"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + sdmmc1_cmd_pz1 { + nvidia,pins = "sdmmc1_cmd_pz1", + "sdmmc1_dat0_py7", + "sdmmc1_dat1_py6", + "sdmmc1_dat2_py5", + "sdmmc1_dat3_py4"; + nvidia,function = "sdmmc1"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + sdmmc1_wp_n_pv3 { + nvidia,pins = "sdmmc1_wp_n_pv3"; + nvidia,function = "spi4"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + sdmmc3_clk_pa6 { + nvidia,pins = "sdmmc3_clk_pa6"; + nvidia,function = "sdmmc3"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + sdmmc3_cmd_pa7 { + nvidia,pins = "sdmmc3_cmd_pa7", + "sdmmc3_dat0_pb7", + "sdmmc3_dat1_pb6", + "sdmmc3_dat2_pb5", + "sdmmc3_dat3_pb4", + "kb_col4_pq4", + "sdmmc3_clk_lb_out_pee4", + "sdmmc3_clk_lb_in_pee5"; + nvidia,function = "sdmmc3"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + sdmmc4_clk_pcc4 { + nvidia,pins = "sdmmc4_clk_pcc4"; + nvidia,function = "sdmmc4"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + sdmmc4_cmd_pt7 { + nvidia,pins = "sdmmc4_cmd_pt7", + "sdmmc4_dat0_paa0", + "sdmmc4_dat1_paa1", + "sdmmc4_dat2_paa2", + "sdmmc4_dat3_paa3", + "sdmmc4_dat4_paa4", + "sdmmc4_dat5_paa5", + "sdmmc4_dat6_paa6", + "sdmmc4_dat7_paa7"; + nvidia,function = "sdmmc4"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + clk_32k_out_pa0 { + nvidia,pins = "clk_32k_out_pa0"; + nvidia,function = "blink"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + kb_col0_pq0 { + nvidia,pins = "kb_col0_pq0", + "kb_col1_pq1", + "kb_col2_pq2", + "kb_row0_pr0", + "kb_row1_pr1", + "kb_row2_pr2"; + nvidia,function = "kbc"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + dap3_din_pp1 { + nvidia,pins = "dap3_din_pp1", + "dap3_sclk_pp3"; + nvidia,function = "displayb"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + nvidia,enable-input = <0>; + }; + pv0 { + nvidia,pins = "pv0"; + nvidia,function = "rsvd4"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + nvidia,enable-input = <0>; + }; + kb_row7_pr7 { + nvidia,pins = "kb_row7_pr7"; + nvidia,function = "rsvd2"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + kb_row10_ps2 { + nvidia,pins = "kb_row10_ps2"; + nvidia,function = "uarta"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + nvidia,enable-input = <1>; + }; + kb_row9_ps1 { + nvidia,pins = "kb_row9_ps1"; + nvidia,function = "uarta"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + pwr_i2c_scl_pz6 { + nvidia,pins = "pwr_i2c_scl_pz6", + "pwr_i2c_sda_pz7"; + nvidia,function = "i2cpwr"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + nvidia,lock = <0>; + nvidia,open-drain = <0>; + }; + sys_clk_req_pz5 { + nvidia,pins = "sys_clk_req_pz5"; + nvidia,function = "sysclk"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + core_pwr_req { + nvidia,pins = "core_pwr_req"; + nvidia,function = "pwron"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + cpu_pwr_req { + nvidia,pins = "cpu_pwr_req"; + nvidia,function = "cpu"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + pwr_int_n { + nvidia,pins = "pwr_int_n"; + nvidia,function = "pmi"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + nvidia,enable-input = <1>; + }; + reset_out_n { + nvidia,pins = "reset_out_n"; + nvidia,function = "reset_out_n"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + clk3_out_pee0 { + nvidia,pins = "clk3_out_pee0"; + nvidia,function = "extperiph3"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + gen1_i2c_scl_pc4 { + nvidia,pins = "gen1_i2c_scl_pc4", + "gen1_i2c_sda_pc5"; + nvidia,function = "i2c1"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + nvidia,lock = <0>; + nvidia,open-drain = <0>; + }; + uart2_cts_n_pj5 { + nvidia,pins = "uart2_cts_n_pj5"; + nvidia,function = "uartb"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + nvidia,enable-input = <1>; + }; + uart2_rts_n_pj6 { + nvidia,pins = "uart2_rts_n_pj6"; + nvidia,function = "uartb"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + uart2_rxd_pc3 { + nvidia,pins = "uart2_rxd_pc3"; + nvidia,function = "irda"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + nvidia,enable-input = <1>; + }; + uart2_txd_pc2 { + nvidia,pins = "uart2_txd_pc2"; + nvidia,function = "irda"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + uart3_cts_n_pa1 { + nvidia,pins = "uart3_cts_n_pa1", + "uart3_rxd_pw7"; + nvidia,function = "uartc"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + nvidia,enable-input = <1>; + }; + uart3_rts_n_pc0 { + nvidia,pins = "uart3_rts_n_pc0", + "uart3_txd_pw6"; + nvidia,function = "uartc"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + owr { + nvidia,pins = "owr"; + nvidia,function = "owr"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + hdmi_cec_pee3 { + nvidia,pins = "hdmi_cec_pee3"; + nvidia,function = "cec"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + nvidia,lock = <0>; + nvidia,open-drain = <0>; + }; + ddc_scl_pv4 { + nvidia,pins = "ddc_scl_pv4", + "ddc_sda_pv5"; + nvidia,function = "i2c4"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + nvidia,lock = <0>; + nvidia,rcv-sel = <1>; + }; + spdif_in_pk6 { + nvidia,pins = "spdif_in_pk6"; + nvidia,function = "usb"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + nvidia,lock = <0>; + }; + usb_vbus_en0_pn4 { + nvidia,pins = "usb_vbus_en0_pn4"; + nvidia,function = "usb"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + nvidia,lock = <0>; + nvidia,open-drain = <1>; + }; + gpio_x6_aud_px6 { + nvidia,pins = "gpio_x6_aud_px6"; + nvidia,function = "spi6"; + nvidia,pull = <2>; + nvidia,tristate = <1>; + nvidia,enable-input = <1>; + }; + gpio_x4_aud_px4 { + nvidia,pins = "gpio_x4_aud_px4", + "gpio_x7_aud_px7"; + nvidia,function = "rsvd1"; + nvidia,pull = <1>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + gpio_x5_aud_px5 { + nvidia,pins = "gpio_x5_aud_px5"; + nvidia,function = "rsvd1"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + gpio_w2_aud_pw2 { + nvidia,pins = "gpio_w2_aud_pw2"; + nvidia,function = "rsvd2"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + gpio_w3_aud_pw3 { + nvidia,pins = "gpio_w3_aud_pw3"; + nvidia,function = "spi6"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + gpio_x1_aud_px1 { + nvidia,pins = "gpio_x1_aud_px1"; + nvidia,function = "rsvd4"; + nvidia,pull = <1>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + gpio_x3_aud_px3 { + nvidia,pins = "gpio_x3_aud_px3"; + nvidia,function = "rsvd4"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + dap3_fs_pp0 { + nvidia,pins = "dap3_fs_pp0"; + nvidia,function = "i2s2"; + nvidia,pull = <1>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + dap3_dout_pp2 { + nvidia,pins = "dap3_dout_pp2"; + nvidia,function = "i2s2"; + nvidia,pull = <1>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + pv1 { + nvidia,pins = "pv1"; + nvidia,function = "rsvd1"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + pbb3 { + nvidia,pins = "pbb3", + "pbb5", + "pbb6", + "pbb7"; + nvidia,function = "rsvd4"; + nvidia,pull = <1>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + pcc1 { + nvidia,pins = "pcc1", + "pcc2"; + nvidia,function = "rsvd4"; + nvidia,pull = <1>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + gmi_ad0_pg0 { + nvidia,pins = "gmi_ad0_pg0", + "gmi_ad1_pg1"; + nvidia,function = "gmi"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + gmi_ad10_ph2 { + nvidia,pins = "gmi_ad10_ph2", + "gmi_ad11_ph3", + "gmi_ad13_ph5", + "gmi_ad8_ph0", + "gmi_clk_pk1"; + nvidia,function = "gmi"; + nvidia,pull = <1>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + gmi_ad2_pg2 { + nvidia,pins = "gmi_ad2_pg2", + "gmi_ad3_pg3"; + nvidia,function = "gmi"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + gmi_adv_n_pk0 { + nvidia,pins = "gmi_adv_n_pk0", + "gmi_cs0_n_pj0", + "gmi_cs2_n_pk3", + "gmi_cs4_n_pk2", + "gmi_cs7_n_pi6", + "gmi_dqs_p_pj3", + "gmi_iordy_pi5", + "gmi_wp_n_pc7"; + nvidia,function = "gmi"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + gmi_cs3_n_pk4 { + nvidia,pins = "gmi_cs3_n_pk4"; + nvidia,function = "gmi"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + clk2_req_pcc5 { + nvidia,pins = "clk2_req_pcc5"; + nvidia,function = "rsvd4"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + kb_col3_pq3 { + nvidia,pins = "kb_col3_pq3", + "kb_col6_pq6", + "kb_col7_pq7"; + nvidia,function = "kbc"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + kb_col5_pq5 { + nvidia,pins = "kb_col5_pq5"; + nvidia,function = "kbc"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + kb_row3_pr3 { + nvidia,pins = "kb_row3_pr3", + "kb_row4_pr4", + "kb_row6_pr6", + "kb_row8_ps0"; + nvidia,function = "kbc"; + nvidia,pull = <1>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + clk3_req_pee1 { + nvidia,pins = "clk3_req_pee1"; + nvidia,function = "rsvd4"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + pu4 { + nvidia,pins = "pu4"; + nvidia,function = "displayb"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + pu5 { + nvidia,pins = "pu5", + "pu6"; + nvidia,function = "displayb"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + hdmi_int_pn7 { + nvidia,pins = "hdmi_int_pn7"; + nvidia,function = "rsvd1"; + nvidia,pull = <1>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + clk1_req_pee2 { + nvidia,pins = "clk1_req_pee2", + "usb_vbus_en1_pn5"; + nvidia,function = "rsvd4"; + nvidia,pull = <1>; + nvidia,tristate = <1>; + nvidia,enable-input = <0>; + }; + + drive_sdio1 { + nvidia,pins = "drive_sdio1"; + nvidia,high-speed-mode = <1>; + nvidia,schmitt = <0>; + nvidia,low-power-mode = <3>; + nvidia,pull-down-strength = <36>; + nvidia,pull-up-strength = <20>; + nvidia,slew-rate-rising = <2>; + nvidia,slew-rate-falling = <2>; + }; + drive_sdio3 { + nvidia,pins = "drive_sdio3"; + nvidia,high-speed-mode = <1>; + nvidia,schmitt = <0>; + nvidia,low-power-mode = <3>; + nvidia,pull-down-strength = <22>; + nvidia,pull-up-strength = <36>; + nvidia,slew-rate-rising = <0>; + nvidia,slew-rate-falling = <0>; + }; + drive_gma { + nvidia,pins = "drive_gma"; + nvidia,high-speed-mode = <1>; + nvidia,schmitt = <0>; + nvidia,low-power-mode = <3>; + nvidia,pull-down-strength = <2>; + nvidia,pull-up-strength = <1>; + nvidia,slew-rate-rising = <0>; + nvidia,slew-rate-falling = <0>; + nvidia,drive-type = <1>; + }; + }; + }; + serial@70006300 { status = "okay"; - clock-frequency = <408000000>; + }; + + i2c@7000c000 { + status = "okay"; + clock-frequency = <100000>; + + battery: smart-battery { + compatible = "ti,bq20z45", "sbs,sbs-battery"; + reg = <0xb>; + battery-name = "battery"; + sbs,i2c-retry-count = <2>; + sbs,poll-retry-count = <100>; + }; + }; + + i2c@7000d000 { + status = "okay"; + clock-frequency = <400000>; + + tps51632 { + compatible = "ti,tps51632"; + reg = <0x43>; + regulator-name = "vdd-cpu"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1520000>; + regulator-boot-on; + regulator-always-on; + }; + + tps65090 { + compatible = "ti,tps65090"; + reg = <0x48>; + interrupt-parent = <&gpio>; + interrupts = <72 0x04>; /* gpio PJ0 */ + + vsys1-supply = <&vdd_ac_bat_reg>; + vsys2-supply = <&vdd_ac_bat_reg>; + vsys3-supply = <&vdd_ac_bat_reg>; + infet1-supply = <&vdd_ac_bat_reg>; + infet2-supply = <&vdd_ac_bat_reg>; + infet3-supply = <&tps65090_dcdc2_reg>; + infet4-supply = <&tps65090_dcdc2_reg>; + infet5-supply = <&tps65090_dcdc2_reg>; + infet6-supply = <&tps65090_dcdc2_reg>; + infet7-supply = <&tps65090_dcdc2_reg>; + vsys-l1-supply = <&vdd_ac_bat_reg>; + vsys-l2-supply = <&vdd_ac_bat_reg>; + + regulators { + tps65090_dcdc1_reg: dcdc1 { + regulator-name = "vdd-sys-5v0"; + regulator-always-on; + regulator-boot-on; + }; + + tps65090_dcdc2_reg: dcdc2 { + regulator-name = "vdd-sys-3v3"; + regulator-always-on; + regulator-boot-on; + }; + + dcdc3 { + regulator-name = "vdd-ao"; + regulator-always-on; + regulator-boot-on; + }; + + fet1 { + regulator-name = "vdd-lcd-bl"; + }; + + fet3 { + regulator-name = "vdd-modem-3v3"; + }; + + fet4 { + regulator-name = "avdd-lcd"; + }; + + fet5 { + regulator-name = "vdd-lvds"; + }; + + fet6 { + regulator-name = "vdd-sd-slot"; + regulator-always-on; + regulator-boot-on; + }; + + fet7 { + regulator-name = "vdd-com-3v3"; + }; + + ldo1 { + regulator-name = "vdd-sby-5v0"; + regulator-always-on; + regulator-boot-on; + }; + + ldo2 { + regulator-name = "vdd-sby-3v3"; + regulator-always-on; + regulator-boot-on; + }; + }; + }; }; pmc { nvidia,invert-interrupt; }; + + sdhci@78000400 { + cd-gpios = <&gpio 170 1>; /* gpio PV2 */ + bus-width = <4>; + status = "okay"; + }; + + sdhci@78000600 { + bus-width = <8>; + status = "okay"; + non-removable; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + vdd_ac_bat_reg: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "vdd_ac_bat"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + dvdd_ts_reg: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "dvdd_ts"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + enable-active-high; + gpio = <&gpio 61 0>; /* GPIO PH5 */ + }; + + lcd_bl_en_reg: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "lcd_bl_en"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio 58 0>; /* GPIO PH2 */ + }; + + usb1_vbus_reg: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio 108 0>; /* GPIO PN4 */ + gpio-open-drain; + vin-supply = <&tps65090_dcdc1_reg>; + }; + + usb3_vbus_reg: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "usb2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio 86 0>; /* GPIO PK6 */ + gpio-open-drain; + vin-supply = <&tps65090_dcdc1_reg>; + }; + + vdd_hdmi_reg: regulator@5 { + compatible = "regulator-fixed"; + reg = <5>; + regulator-name = "vdd_hdmi_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio 81 0>; /* GPIO PK1 */ + vin-supply = <&tps65090_dcdc1_reg>; + }; + }; }; diff --git a/arch/arm/boot/dts/tegra114-pluto.dts b/arch/arm/boot/dts/tegra114-pluto.dts index 9bea8f57aa47..6bbc8efae9c0 100644 --- a/arch/arm/boot/dts/tegra114-pluto.dts +++ b/arch/arm/boot/dts/tegra114-pluto.dts @@ -12,10 +12,22 @@ serial@70006300 { status = "okay"; - clock-frequency = <408000000>; }; pmc { nvidia,invert-interrupt; }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; }; diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi index 1dfaf2874c57..629415ffd8dc 100644 --- a/arch/arm/boot/dts/tegra114.dtsi +++ b/arch/arm/boot/dts/tegra114.dtsi @@ -4,6 +4,13 @@ compatible = "nvidia,tegra114"; interrupt-parent = <&gic>; + aliases { + serial0 = &uarta; + serial1 = &uartb; + serial2 = &uartc; + serial3 = &uartd; + }; + gic: interrupt-controller { compatible = "arm,cortex-a15-gic"; #interrupt-cells = <3>; @@ -24,14 +31,53 @@ 0 42 0x04 0 121 0x04 0 122 0x04>; + clocks = <&tegra_car 5>; }; tegra_car: clock { - compatible = "nvidia,tegra114-car, nvidia,tegra30-car"; + compatible = "nvidia,tegra114-car"; reg = <0x60006000 0x1000>; #clock-cells = <1>; }; + apbdma: dma { + compatible = "nvidia,tegra114-apbdma"; + reg = <0x6000a000 0x1400>; + interrupts = <0 104 0x04 + 0 105 0x04 + 0 106 0x04 + 0 107 0x04 + 0 108 0x04 + 0 109 0x04 + 0 110 0x04 + 0 111 0x04 + 0 112 0x04 + 0 113 0x04 + 0 114 0x04 + 0 115 0x04 + 0 116 0x04 + 0 117 0x04 + 0 118 0x04 + 0 119 0x04 + 0 128 0x04 + 0 129 0x04 + 0 130 0x04 + 0 131 0x04 + 0 132 0x04 + 0 133 0x04 + 0 134 0x04 + 0 135 0x04 + 0 136 0x04 + 0 137 0x04 + 0 138 0x04 + 0 139 0x04 + 0 140 0x04 + 0 141 0x04 + 0 142 0x04 + 0 143 0x04>; + clocks = <&tegra_car 34>; + }; + ahb: ahb { compatible = "nvidia,tegra114-ahb", "nvidia,tegra30-ahb"; reg = <0x6000c004 0x14c>; @@ -60,35 +106,186 @@ 0x70003000 0x40c>; /* Mux registers */ }; - serial@70006000 { + /* + * There are two serial driver i.e. 8250 based simple serial + * driver and APB DMA based serial driver for higher baudrate + * and performace. To enable the 8250 based driver, the compatible + * is "nvidia,tegra114-uart", "nvidia,tegra20-uart" and to enable + * the APB DMA based serial driver, the comptible is + * "nvidia,tegra114-hsuart", "nvidia,tegra30-hsuart". + */ + uarta: serial@70006000 { compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart"; reg = <0x70006000 0x40>; reg-shift = <2>; interrupts = <0 36 0x04>; + nvidia,dma-request-selector = <&apbdma 8>; status = "disabled"; + clocks = <&tegra_car 6>; }; - serial@70006040 { + uartb: serial@70006040 { compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart"; reg = <0x70006040 0x40>; reg-shift = <2>; interrupts = <0 37 0x04>; + nvidia,dma-request-selector = <&apbdma 9>; status = "disabled"; + clocks = <&tegra_car 192>; }; - serial@70006200 { + uartc: serial@70006200 { compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart"; reg = <0x70006200 0x100>; reg-shift = <2>; interrupts = <0 46 0x04>; + nvidia,dma-request-selector = <&apbdma 10>; status = "disabled"; + clocks = <&tegra_car 55>; }; - serial@70006300 { + uartd: serial@70006300 { compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart"; reg = <0x70006300 0x100>; reg-shift = <2>; interrupts = <0 90 0x04>; + nvidia,dma-request-selector = <&apbdma 19>; + status = "disabled"; + clocks = <&tegra_car 65>; + }; + + pwm: pwm { + compatible = "nvidia,tegra114-pwm", "nvidia,tegra20-pwm"; + reg = <0x7000a000 0x100>; + #pwm-cells = <2>; + clocks = <&tegra_car 17>; + status = "disabled"; + }; + + i2c@7000c000 { + compatible = "nvidia,tegra114-i2c"; + reg = <0x7000c000 0x100>; + interrupts = <0 38 0x04>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car 12>; + clock-names = "div-clk"; + status = "disabled"; + }; + + i2c@7000c400 { + compatible = "nvidia,tegra114-i2c"; + reg = <0x7000c400 0x100>; + interrupts = <0 84 0x04>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car 54>; + clock-names = "div-clk"; + status = "disabled"; + }; + + i2c@7000c500 { + compatible = "nvidia,tegra114-i2c"; + reg = <0x7000c500 0x100>; + interrupts = <0 92 0x04>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car 67>; + clock-names = "div-clk"; + status = "disabled"; + }; + + i2c@7000c700 { + compatible = "nvidia,tegra114-i2c"; + reg = <0x7000c700 0x100>; + interrupts = <0 120 0x04>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car 103>; + clock-names = "div-clk"; + status = "disabled"; + }; + + i2c@7000d000 { + compatible = "nvidia,tegra114-i2c"; + reg = <0x7000d000 0x100>; + interrupts = <0 53 0x04>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car 47>; + clock-names = "div-clk"; + status = "disabled"; + }; + + spi@7000d400 { + compatible = "nvidia,tegra114-spi"; + reg = <0x7000d400 0x200>; + interrupts = <0 59 0x04>; + nvidia,dma-request-selector = <&apbdma 15>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car 41>; + clock-names = "spi"; + status = "disabled"; + }; + + spi@7000d600 { + compatible = "nvidia,tegra114-spi"; + reg = <0x7000d600 0x200>; + interrupts = <0 82 0x04>; + nvidia,dma-request-selector = <&apbdma 16>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car 44>; + clock-names = "spi"; + status = "disabled"; + }; + + spi@7000d800 { + compatible = "nvidia,tegra114-spi"; + reg = <0x7000d800 0x200>; + interrupts = <0 83 0x04>; + nvidia,dma-request-selector = <&apbdma 17>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car 46>; + clock-names = "spi"; + status = "disabled"; + }; + + spi@7000da00 { + compatible = "nvidia,tegra114-spi"; + reg = <0x7000da00 0x200>; + interrupts = <0 93 0x04>; + nvidia,dma-request-selector = <&apbdma 18>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car 68>; + clock-names = "spi"; + status = "disabled"; + }; + + spi@7000dc00 { + compatible = "nvidia,tegra114-spi"; + reg = <0x7000dc00 0x200>; + interrupts = <0 94 0x04>; + nvidia,dma-request-selector = <&apbdma 27>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car 104>; + clock-names = "spi"; + status = "disabled"; + }; + + spi@7000de00 { + compatible = "nvidia,tegra114-spi"; + reg = <0x7000de00 0x200>; + interrupts = <0 79 0x04>; + nvidia,dma-request-selector = <&apbdma 28>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car 105>; + clock-names = "spi"; status = "disabled"; }; @@ -96,11 +293,22 @@ compatible = "nvidia,tegra114-rtc", "nvidia,tegra20-rtc"; reg = <0x7000e000 0x100>; interrupts = <0 2 0x04>; + clocks = <&tegra_car 4>; + }; + + kbc { + compatible = "nvidia,tegra114-kbc"; + reg = <0x7000e200 0x100>; + interrupts = <0 85 0x04>; + clocks = <&tegra_car 36>; + status = "disabled"; }; pmc { - compatible = "nvidia,tegra114-pmc", "nvidia,tegra30-pmc"; + compatible = "nvidia,tegra114-pmc"; reg = <0x7000e400 0x400>; + clocks = <&tegra_car 261>, <&clk32k_in>; + clock-names = "pclk", "clk32k_in"; }; iommu { @@ -114,6 +322,38 @@ nvidia,ahb = <&ahb>; }; + sdhci@78000000 { + compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci"; + reg = <0x78000000 0x200>; + interrupts = <0 14 0x04>; + clocks = <&tegra_car 14>; + status = "disable"; + }; + + sdhci@78000200 { + compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci"; + reg = <0x78000200 0x200>; + interrupts = <0 15 0x04>; + clocks = <&tegra_car 9>; + status = "disable"; + }; + + sdhci@78000400 { + compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci"; + reg = <0x78000400 0x200>; + interrupts = <0 19 0x04>; + clocks = <&tegra_car 69>; + status = "disable"; + }; + + sdhci@78000600 { + compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci"; + reg = <0x78000600 0x200>; + interrupts = <0 31 0x04>; + clocks = <&tegra_car 15>; + status = "disable"; + }; + cpus { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/tegra20-colibri-512.dtsi b/arch/arm/boot/dts/tegra20-colibri-512.dtsi index 444162090042..a573b94b7c93 100644 --- a/arch/arm/boot/dts/tegra20-colibri-512.dtsi +++ b/arch/arm/boot/dts/tegra20-colibri-512.dtsi @@ -361,6 +361,15 @@ }; }; + pmc { + nvidia,suspend-mode = <2>; + nvidia,cpu-pwr-good-time = <5000>; + nvidia,cpu-pwr-off-time = <5000>; + nvidia,core-pwr-good-time = <3845 3845>; + nvidia,core-pwr-off-time = <3875>; + nvidia,sys-clock-req-active-high; + }; + memory-controller@7000f400 { emc-table@83250 { reg = <83250>; @@ -444,7 +453,20 @@ }; sdhci@c8000600 { - cd-gpios = <&gpio 23 0>; /* gpio PC7 */ + cd-gpios = <&gpio 23 1>; /* gpio PC7 */ + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; }; sound { @@ -460,6 +482,9 @@ "Mic", "MIC1"; nvidia,ac97-controller = <&ac97>; + + clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>; + clock-names = "pll_a", "pll_a_out0", "mclk"; }; regulators { diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts index 61d027f03617..e7d5de4e00b9 100644 --- a/arch/arm/boot/dts/tegra20-harmony.dts +++ b/arch/arm/boot/dts/tegra20-harmony.dts @@ -416,6 +416,12 @@ pmc { nvidia,invert-interrupt; + nvidia,suspend-mode = <2>; + nvidia,cpu-pwr-good-time = <5000>; + nvidia,cpu-pwr-off-time = <5000>; + nvidia,core-pwr-good-time = <3845 3845>; + nvidia,core-pwr-off-time = <3875>; + nvidia,sys-clock-req-active-high; }; usb@c5000000 { @@ -437,7 +443,7 @@ sdhci@c8000200 { status = "okay"; - cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + cd-gpios = <&gpio 69 1>; /* gpio PI5 */ wp-gpios = <&gpio 57 0>; /* gpio PH1 */ power-gpios = <&gpio 155 0>; /* gpio PT3 */ bus-width = <4>; @@ -445,12 +451,36 @@ sdhci@c8000600 { status = "okay"; - cd-gpios = <&gpio 58 0>; /* gpio PH2 */ + cd-gpios = <&gpio 58 1>; /* gpio PH2 */ wp-gpios = <&gpio 59 0>; /* gpio PH3 */ power-gpios = <&gpio 70 0>; /* gpio PI6 */ bus-width = <8>; }; + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power { + label = "Power"; + gpios = <&gpio 170 1>; /* gpio PV2, active low */ + linux,code = <116>; /* KEY_POWER */ + gpio-key,wakeup; + }; + }; + kbc { status = "okay"; nvidia,debounce-delay-ms = <2>; @@ -656,5 +686,8 @@ nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ nvidia,int-mic-en-gpios = <&gpio 184 0>; /*gpio PX0 */ nvidia,ext-mic-en-gpios = <&gpio 185 0>; /* gpio PX1 */ + + clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>; + clock-names = "pll_a", "pll_a_out0", "mclk"; }; }; diff --git a/arch/arm/boot/dts/tegra20-medcom-wide.dts b/arch/arm/boot/dts/tegra20-medcom-wide.dts index a2d6d6541f83..ace23437da89 100644 --- a/arch/arm/boot/dts/tegra20-medcom-wide.dts +++ b/arch/arm/boot/dts/tegra20-medcom-wide.dts @@ -6,6 +6,10 @@ model = "Avionic Design Medcom-Wide board"; compatible = "ad,medcom-wide", "ad,tamonten", "nvidia,tegra20"; + pwm { + status = "okay"; + }; + i2c@7000c000 { wm8903: wm8903@1a { compatible = "wlf,wm8903"; @@ -54,5 +58,8 @@ nvidia,spkr-en-gpios = <&wm8903 2 0>; nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ + + clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>; + clock-names = "pll_a", "pll_a_out0", "mclk"; }; }; diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts index 54d6fce00a59..e3e0c9977df4 100644 --- a/arch/arm/boot/dts/tegra20-paz00.dts +++ b/arch/arm/boot/dts/tegra20-paz00.dts @@ -415,6 +415,12 @@ pmc { nvidia,invert-interrupt; + nvidia,suspend-mode = <2>; + nvidia,cpu-pwr-good-time = <2000>; + nvidia,cpu-pwr-off-time = <0>; + nvidia,core-pwr-good-time = <3845 3845>; + nvidia,core-pwr-off-time = <0>; + nvidia,sys-clock-req-active-high; }; usb@c5000000 { @@ -436,7 +442,7 @@ sdhci@c8000000 { status = "okay"; - cd-gpios = <&gpio 173 0>; /* gpio PV5 */ + cd-gpios = <&gpio 173 1>; /* gpio PV5 */ wp-gpios = <&gpio 57 0>; /* gpio PH1 */ power-gpios = <&gpio 169 0>; /* gpio PV1 */ bus-width = <4>; @@ -445,6 +451,20 @@ sdhci@c8000600 { status = "okay"; bus-width = <8>; + non-removable; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; }; gpio-keys { @@ -501,5 +521,8 @@ nvidia,audio-codec = <&alc5632>; nvidia,i2s-controller = <&tegra_i2s1>; nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ + + clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>; + clock-names = "pll_a", "pll_a_out0", "mclk"; }; }; diff --git a/arch/arm/boot/dts/tegra20-plutux.dts b/arch/arm/boot/dts/tegra20-plutux.dts index 289480026fbf..1a17cc30bb9d 100644 --- a/arch/arm/boot/dts/tegra20-plutux.dts +++ b/arch/arm/boot/dts/tegra20-plutux.dts @@ -52,5 +52,8 @@ nvidia,spkr-en-gpios = <&wm8903 2 0>; nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ + + clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>; + clock-names = "pll_a", "pll_a_out0", "mclk"; }; }; diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts index 37b3a57ec0f1..cee4c34010fe 100644 --- a/arch/arm/boot/dts/tegra20-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -517,6 +517,12 @@ pmc { nvidia,invert-interrupt; + nvidia,suspend-mode = <2>; + nvidia,cpu-pwr-good-time = <5000>; + nvidia,cpu-pwr-off-time = <5000>; + nvidia,core-pwr-good-time = <3845 3845>; + nvidia,core-pwr-off-time = <3875>; + nvidia,sys-clock-req-active-high; }; memory-controller@7000f400 { @@ -580,11 +586,12 @@ status = "okay"; power-gpios = <&gpio 86 0>; /* gpio PK6 */ bus-width = <4>; + keep-power-in-suspend; }; sdhci@c8000400 { status = "okay"; - cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + cd-gpios = <&gpio 69 1>; /* gpio PI5 */ wp-gpios = <&gpio 57 0>; /* gpio PH1 */ power-gpios = <&gpio 70 0>; /* gpio PI6 */ bus-width = <4>; @@ -593,6 +600,20 @@ sdhci@c8000600 { status = "okay"; bus-width = <8>; + non-removable; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; }; gpio-keys { @@ -808,5 +829,8 @@ nvidia,spkr-en-gpios = <&wm8903 2 0>; nvidia,hp-det-gpios = <&gpio 185 0>; /* gpio PX1 */ + + clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>; + clock-names = "pll_a", "pll_a_out0", "mclk"; }; }; diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi index 4766abae7a72..50b3ec16b93a 100644 --- a/arch/arm/boot/dts/tegra20-tamonten.dtsi +++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi @@ -458,6 +458,12 @@ pmc { nvidia,invert-interrupt; + nvidia,suspend-mode = <2>; + nvidia,cpu-pwr-good-time = <5000>; + nvidia,cpu-pwr-off-time = <5000>; + nvidia,core-pwr-good-time = <3845 3845>; + nvidia,core-pwr-off-time = <3875>; + nvidia,sys-clock-req-active-high; }; usb@c5008000 { @@ -465,12 +471,25 @@ }; sdhci@c8000600 { - cd-gpios = <&gpio 58 0>; /* gpio PH2 */ + cd-gpios = <&gpio 58 1>; /* gpio PH2 */ wp-gpios = <&gpio 59 0>; /* gpio PH3 */ bus-width = <4>; status = "okay"; }; + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + regulators { compatible = "simple-bus"; diff --git a/arch/arm/boot/dts/tegra20-tec.dts b/arch/arm/boot/dts/tegra20-tec.dts index 402b21004bef..742f0b38d21d 100644 --- a/arch/arm/boot/dts/tegra20-tec.dts +++ b/arch/arm/boot/dts/tegra20-tec.dts @@ -52,5 +52,8 @@ nvidia,spkr-en-gpios = <&wm8903 2 0>; nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ + + clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>; + clock-names = "pll_a", "pll_a_out0", "mclk"; }; }; diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts index 5d79e4fc49a6..9cc78a15d739 100644 --- a/arch/arm/boot/dts/tegra20-trimslice.dts +++ b/arch/arm/boot/dts/tegra20-trimslice.dts @@ -300,6 +300,15 @@ }; }; + pmc { + nvidia,suspend-mode = <2>; + nvidia,cpu-pwr-good-time = <5000>; + nvidia,cpu-pwr-off-time = <5000>; + nvidia,core-pwr-good-time = <3845 3845>; + nvidia,core-pwr-off-time = <3875>; + nvidia,sys-clock-req-active-high; + }; + usb@c5000000 { status = "okay"; nvidia,vbus-gpio = <&gpio 170 0>; /* gpio PV2 */ @@ -325,11 +334,35 @@ sdhci@c8000600 { status = "okay"; - cd-gpios = <&gpio 121 0>; /* gpio PP1 */ + cd-gpios = <&gpio 121 1>; /* gpio PP1 */ wp-gpios = <&gpio 122 0>; /* gpio PP2 */ bus-width = <4>; }; + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power { + label = "Power"; + gpios = <&gpio 190 1>; /* gpio PX6, active low */ + linux,code = <116>; /* KEY_POWER */ + gpio-key,wakeup; + }; + }; + poweroff { compatible = "gpio-poweroff"; gpios = <&gpio 191 1>; /* gpio PX7, active low */ @@ -363,5 +396,8 @@ compatible = "nvidia,tegra-audio-trimslice"; nvidia,i2s-controller = <&tegra_i2s1>; nvidia,audio-codec = <&codec>; + + clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>; + clock-names = "pll_a", "pll_a_out0", "mclk"; }; }; diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts index 425c89000c20..dd38f1f03834 100644 --- a/arch/arm/boot/dts/tegra20-ventana.dts +++ b/arch/arm/boot/dts/tegra20-ventana.dts @@ -493,6 +493,12 @@ pmc { nvidia,invert-interrupt; + nvidia,suspend-mode = <2>; + nvidia,cpu-pwr-good-time = <2000>; + nvidia,cpu-pwr-off-time = <100>; + nvidia,core-pwr-good-time = <3845 3845>; + nvidia,core-pwr-off-time = <458>; + nvidia,sys-clock-req-active-high; }; usb@c5000000 { @@ -516,11 +522,12 @@ status = "okay"; power-gpios = <&gpio 86 0>; /* gpio PK6 */ bus-width = <4>; + keep-power-in-suspend; }; sdhci@c8000400 { status = "okay"; - cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + cd-gpios = <&gpio 69 1>; /* gpio PI5 */ wp-gpios = <&gpio 57 0>; /* gpio PH1 */ power-gpios = <&gpio 70 0>; /* gpio PI6 */ bus-width = <4>; @@ -529,6 +536,31 @@ sdhci@c8000600 { status = "okay"; bus-width = <8>; + non-removable; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power { + label = "Power"; + gpios = <&gpio 170 1>; /* gpio PV2, active low */ + linux,code = <116>; /* KEY_POWER */ + gpio-key,wakeup; + }; }; regulators { @@ -607,5 +639,8 @@ nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ nvidia,int-mic-en-gpios = <&gpio 184 0>; /* gpio PX0 */ nvidia,ext-mic-en-gpios = <&gpio 185 0>; /* gpio PX1 */ + + clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>; + clock-names = "pll_a", "pll_a_out0", "mclk"; }; }; diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts index ea57c0f6dcce..d2567f83aaff 100644 --- a/arch/arm/boot/dts/tegra20-whistler.dts +++ b/arch/arm/boot/dts/tegra20-whistler.dts @@ -496,6 +496,14 @@ pmc { nvidia,invert-interrupt; + nvidia,suspend-mode = <2>; + nvidia,cpu-pwr-good-time = <2000>; + nvidia,cpu-pwr-off-time = <1000>; + nvidia,core-pwr-good-time = <0 3845>; + nvidia,core-pwr-off-time = <93727>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; + nvidia,combined-power-req; }; usb@c5000000 { @@ -510,6 +518,7 @@ sdhci@c8000400 { status = "okay"; + cd-gpios = <&gpio 69 1>; /* gpio PI5 */ wp-gpios = <&gpio 173 0>; /* gpio PV5 */ bus-width = <8>; }; @@ -517,6 +526,20 @@ sdhci@c8000600 { status = "okay"; bus-width = <8>; + non-removable; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; }; kbc { @@ -525,6 +548,7 @@ nvidia,repeat-delay-ms = <160>; nvidia,kbc-row-pins = <0 1 2>; nvidia,kbc-col-pins = <16 17>; + nvidia,wakeup-source; linux,keymap = <0x00000074 /* KEY_POWER */ 0x01000066 /* KEY_HOME */ 0x0101009E /* KEY_BACK */ @@ -559,5 +583,8 @@ nvidia,i2s-controller = <&tegra_i2s1>; nvidia,audio-codec = <&codec>; + + clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>; + clock-names = "pll_a", "pll_a_out0", "mclk"; }; }; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 3d3f64d2111a..56a91106041b 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -145,6 +145,7 @@ 0 1 0x04 0 41 0x04 0 42 0x04>; + clocks = <&tegra_car 5>; }; tegra_car: clock { @@ -208,7 +209,7 @@ compatible = "nvidia,tegra20-das"; reg = <0x70000c00 0x80>; }; - + tegra_ac97: ac97 { compatible = "nvidia,tegra20-ac97"; reg = <0x70002000 0x200>; @@ -298,12 +299,14 @@ reg = <0x7000a000 0x100>; #pwm-cells = <2>; clocks = <&tegra_car 17>; + status = "disabled"; }; rtc { compatible = "nvidia,tegra20-rtc"; reg = <0x7000e000 0x100>; interrupts = <0 2 0x04>; + clocks = <&tegra_car 4>; }; i2c@7000c000 { @@ -416,6 +419,8 @@ pmc { compatible = "nvidia,tegra20-pmc"; reg = <0x7000e400 0x400>; + clocks = <&tegra_car 110>, <&clk32k_in>; + clock-names = "pclk", "clk32k_in"; }; memory-controller@7000f000 { @@ -438,31 +443,6 @@ #size-cells = <0>; }; - phy1: usb-phy@c5000400 { - compatible = "nvidia,tegra20-usb-phy"; - reg = <0xc5000400 0x3c00>; - phy_type = "utmi"; - nvidia,has-legacy-mode; - clocks = <&tegra_car 22>, <&tegra_car 127>; - clock-names = "phy", "pll_u"; - }; - - phy2: usb-phy@c5004400 { - compatible = "nvidia,tegra20-usb-phy"; - reg = <0xc5004400 0x3c00>; - phy_type = "ulpi"; - clocks = <&tegra_car 94>, <&tegra_car 127>; - clock-names = "phy", "pll_u"; - }; - - phy3: usb-phy@c5008400 { - compatible = "nvidia,tegra20-usb-phy"; - reg = <0xc5008400 0x3C00>; - phy_type = "utmi"; - clocks = <&tegra_car 22>, <&tegra_car 127>; - clock-names = "phy", "pll_u"; - }; - usb@c5000000 { compatible = "nvidia,tegra20-ehci", "usb-ehci"; reg = <0xc5000000 0x4000>; @@ -475,6 +455,15 @@ status = "disabled"; }; + phy1: usb-phy@c5000400 { + compatible = "nvidia,tegra20-usb-phy"; + reg = <0xc5000400 0x3c00>; + phy_type = "utmi"; + nvidia,has-legacy-mode; + clocks = <&tegra_car 22>, <&tegra_car 127>; + clock-names = "phy", "pll_u"; + }; + usb@c5004000 { compatible = "nvidia,tegra20-ehci", "usb-ehci"; reg = <0xc5004000 0x4000>; @@ -485,6 +474,14 @@ status = "disabled"; }; + phy2: usb-phy@c5004400 { + compatible = "nvidia,tegra20-usb-phy"; + reg = <0xc5004400 0x3c00>; + phy_type = "ulpi"; + clocks = <&tegra_car 93>, <&tegra_car 127>; + clock-names = "phy", "pll_u"; + }; + usb@c5008000 { compatible = "nvidia,tegra20-ehci", "usb-ehci"; reg = <0xc5008000 0x4000>; @@ -495,6 +492,14 @@ status = "disabled"; }; + phy3: usb-phy@c5008400 { + compatible = "nvidia,tegra20-usb-phy"; + reg = <0xc5008400 0x3c00>; + phy_type = "utmi"; + clocks = <&tegra_car 22>, <&tegra_car 127>; + clock-names = "phy", "pll_u"; + }; + sdhci@c8000000 { compatible = "nvidia,tegra20-sdhci"; reg = <0xc8000000 0x200>; diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts index 8ff2ff20e4a3..b732f7c13a66 100644 --- a/arch/arm/boot/dts/tegra30-beaver.dts +++ b/arch/arm/boot/dts/tegra30-beaver.dts @@ -253,11 +253,18 @@ pmc { status = "okay"; nvidia,invert-interrupt; + nvidia,suspend-mode = <2>; + nvidia,cpu-pwr-good-time = <2000>; + nvidia,cpu-pwr-off-time = <200>; + nvidia,core-pwr-good-time = <3845 3845>; + nvidia,core-pwr-off-time = <0>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; }; sdhci@78000000 { status = "okay"; - cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + cd-gpios = <&gpio 69 1>; /* gpio PI5 */ wp-gpios = <&gpio 155 0>; /* gpio PT3 */ power-gpios = <&gpio 31 0>; /* gpio PD7 */ bus-width = <4>; @@ -266,6 +273,20 @@ sdhci@78000600 { status = "okay"; bus-width = <8>; + non-removable; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; }; regulators { diff --git a/arch/arm/boot/dts/tegra30-cardhu-a02.dts b/arch/arm/boot/dts/tegra30-cardhu-a02.dts index adc88aa50eb6..e392bd2dab9b 100644 --- a/arch/arm/boot/dts/tegra30-cardhu-a02.dts +++ b/arch/arm/boot/dts/tegra30-cardhu-a02.dts @@ -88,6 +88,7 @@ status = "okay"; power-gpios = <&gpio 28 0>; /* gpio PD4 */ bus-width = <4>; + keep-power-in-suspend; }; }; diff --git a/arch/arm/boot/dts/tegra30-cardhu-a04.dts b/arch/arm/boot/dts/tegra30-cardhu-a04.dts index 08163e145d57..d0db6c7e774f 100644 --- a/arch/arm/boot/dts/tegra30-cardhu-a04.dts +++ b/arch/arm/boot/dts/tegra30-cardhu-a04.dts @@ -100,5 +100,6 @@ status = "okay"; power-gpios = <&gpio 27 0>; /* gpio PD3 */ bus-width = <4>; + keep-power-in-suspend; }; }; diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi index 17499272a4ef..01b4c26fad96 100644 --- a/arch/arm/boot/dts/tegra30-cardhu.dtsi +++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi @@ -307,11 +307,18 @@ pmc { status = "okay"; nvidia,invert-interrupt; + nvidia,suspend-mode = <2>; + nvidia,cpu-pwr-good-time = <2000>; + nvidia,cpu-pwr-off-time = <200>; + nvidia,core-pwr-good-time = <3845 3845>; + nvidia,core-pwr-off-time = <0>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; }; sdhci@78000000 { status = "okay"; - cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + cd-gpios = <&gpio 69 1>; /* gpio PI5 */ wp-gpios = <&gpio 155 0>; /* gpio PT3 */ power-gpios = <&gpio 31 0>; /* gpio PD7 */ bus-width = <4>; @@ -320,6 +327,20 @@ sdhci@78000600 { status = "okay"; bus-width = <8>; + non-removable; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; }; regulators { @@ -496,5 +517,8 @@ nvidia,spkr-en-gpios = <&wm8903 2 0>; nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ + + clocks = <&tegra_car 184>, <&tegra_car 185>, <&tegra_car 120>; + clock-names = "pll_a", "pll_a_out0", "mclk"; }; }; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index dbf46c272562..15ded605142a 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -148,6 +148,7 @@ 0 42 0x04 0 121 0x04 0 122 0x04>; + clocks = <&tegra_car 5>; }; tegra_car: clock { @@ -285,12 +286,14 @@ reg = <0x7000a000 0x100>; #pwm-cells = <2>; clocks = <&tegra_car 17>; + status = "disabled"; }; rtc { compatible = "nvidia,tegra30-rtc", "nvidia,tegra20-rtc"; reg = <0x7000e000 0x100>; interrupts = <0 2 0x04>; + clocks = <&tegra_car 4>; }; i2c@7000c000 { @@ -423,8 +426,10 @@ }; pmc { - compatible = "nvidia,tegra20-pmc", "nvidia,tegra30-pmc"; + compatible = "nvidia,tegra30-pmc"; reg = <0x7000e400 0x400>; + clocks = <&tegra_car 218>, <&clk32k_in>; + clock-names = "pclk", "clk32k_in"; }; memory-controller { diff --git a/arch/arm/boot/dts/tps6507x.dtsi b/arch/arm/boot/dts/tps6507x.dtsi new file mode 100644 index 000000000000..4c326e591e5a --- /dev/null +++ b/arch/arm/boot/dts/tps6507x.dtsi @@ -0,0 +1,47 @@ +/* + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * Integrated Power Management Chip + * http://www.ti.com/lit/ds/symlink/tps65070.pdf + */ + +&tps { + compatible = "ti,tps6507x"; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + vdcdc1_reg: regulator@0 { + reg = <0>; + regulator-compatible = "VDCDC1"; + }; + + vdcdc2_reg: regulator@1 { + reg = <1>; + regulator-compatible = "VDCDC2"; + }; + + vdcdc3_reg: regulator@2 { + reg = <2>; + regulator-compatible = "VDCDC3"; + }; + + ldo1_reg: regulator@3 { + reg = <3>; + regulator-compatible = "LDO1"; + }; + + ldo2_reg: regulator@4 { + reg = <4>; + regulator-compatible = "LDO2"; + }; + + }; +}; diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi index ed0bc9546837..b3034da00a37 100644 --- a/arch/arm/boot/dts/twl4030.dtsi +++ b/arch/arm/boot/dts/twl4030.dtsi @@ -23,6 +23,12 @@ compatible = "ti,twl4030-wdt"; }; + vcc: regulator-vdd1 { + compatible = "ti,twl4030-vdd1"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1450000>; + }; + vdac: regulator-vdac { compatible = "ti,twl4030-vdac"; regulator-min-microvolt = <1800000>; @@ -67,7 +73,7 @@ #interrupt-cells = <1>; }; - twl4030-usb { + usb2_phy: twl4030-usb { compatible = "ti,twl4030-usb"; interrupts = <10>, <4>; usb1v5-supply = <&vusb1v5>; @@ -75,4 +81,14 @@ usb3v1-supply = <&vusb3v1>; usb_mode = <1>; }; + + twl_pwm: pwm { + compatible = "ti,twl4030-pwm"; + #pwm-cells = <2>; + }; + + twl_pwmled: pwmled { + compatible = "ti,twl4030-pwmled"; + #pwm-cells = <2>; + }; }; diff --git a/arch/arm/boot/dts/twl6030.dtsi b/arch/arm/boot/dts/twl6030.dtsi index 9996cfc5ee80..2e3bd3172b23 100644 --- a/arch/arm/boot/dts/twl6030.dtsi +++ b/arch/arm/boot/dts/twl6030.dtsi @@ -91,4 +91,16 @@ compatible = "ti,twl6030-usb"; interrupts = <4>, <10>; }; + + twl_pwm: pwm { + /* provides two PWMs (id 0, 1 for PWM1 and PWM2) */ + compatible = "ti,twl6030-pwm"; + #pwm-cells = <2>; + }; + + twl_pwmled: pwmled { + /* provides one PWM (id 0 for Charging indicator LED) */ + compatible = "ti,twl6030-pwmled"; + #pwm-cells = <2>; + }; }; diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts index e2fe3195c0d1..dde75ae8b4b1 100644 --- a/arch/arm/boot/dts/versatile-ab.dts +++ b/arch/arm/boot/dts/versatile-ab.dts @@ -121,6 +121,18 @@ interrupts = <0>; }; + timer@101e2000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x101e2000 0x1000>; + interrupts = <4>; + }; + + timer@101e3000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x101e3000 0x1000>; + interrupts = <5>; + }; + gpio0: gpio@101e4000 { compatible = "arm,pl061", "arm,primecell"; reg = <0x101e4000 0x1000>; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts index 73187173117c..9420053acc14 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts @@ -117,7 +117,7 @@ }; pmu { - compatible = "arm,cortex-a15-pmu", "arm,cortex-a9-pmu"; + compatible = "arm,cortex-a15-pmu"; interrupts = <0 68 4>, <0 69 4>; }; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts index dfe371ec2749..d2803be4e1a8 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts @@ -134,7 +134,7 @@ }; pmu { - compatible = "arm,cortex-a15-pmu", "arm,cortex-a9-pmu"; + compatible = "arm,cortex-a15-pmu"; interrupts = <0 68 4>, <0 69 4>; }; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts index 6328cbc71d30..c544a5504591 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts @@ -111,7 +111,7 @@ }; pmu { - compatible = "arm,cortex-a5-pmu", "arm,cortex-a9-pmu"; + compatible = "arm,cortex-a5-pmu"; interrupts = <0 68 4>, <0 69 4>; }; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/vexpress-v2p-ca9.dts index 1420bb14d95c..62d9b225dcce 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca9.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca9.dts @@ -98,6 +98,7 @@ <0 49 4>; clocks = <&oscclk2>, <&oscclk2>; clock-names = "timclk", "apb_pclk"; + status = "disabled"; }; watchdog@100e5000 { diff --git a/arch/arm/boot/dts/vt8500-bv07.dts b/arch/arm/boot/dts/vt8500-bv07.dts index 567cf4e8ab84..877b33afa7ed 100644 --- a/arch/arm/boot/dts/vt8500-bv07.dts +++ b/arch/arm/boot/dts/vt8500-bv07.dts @@ -11,26 +11,22 @@ / { model = "Benign BV07 Netbook"; +}; - /* - * Display node is based on Sascha Hauer's patch on dri-devel. - * Added a bpp property to calculate the size of the framebuffer - * until the binding is formalized. - */ - display: display@0 { - modes { - mode0: mode@0 { - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hfront-porch = <40>; - hsync-len = <0>; - vback-porch = <32>; - vfront-porch = <11>; - vsync-len = <1>; - clock = <0>; /* unused but required */ - bpp = <16>; /* non-standard but required */ - }; +&fb { + bits-per-pixel = <16>; + display-timings { + native-mode = <&timing0>; + timing0: 800x480 { + clock-frequency = <0>; /* unused but required */ + hactive = <800>; + vactive = <480>; + hfront-porch = <40>; + hback-porch = <88>; + hsync-len = <0>; + vback-porch = <32>; + vfront-porch = <11>; + vsync-len = <1>; }; }; }; diff --git a/arch/arm/boot/dts/vt8500.dtsi b/arch/arm/boot/dts/vt8500.dtsi index cf31ced46602..4a4b96f6827e 100644 --- a/arch/arm/boot/dts/vt8500.dtsi +++ b/arch/arm/boot/dts/vt8500.dtsi @@ -25,11 +25,13 @@ #interrupt-cells = <1>; }; - gpio: gpio-controller@d8110000 { - compatible = "via,vt8500-gpio"; - gpio-controller; + pinctrl: pinctrl@d8110000 { + compatible = "via,vt8500-pinctrl"; reg = <0xd8110000 0x10000>; - #gpio-cells = <3>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; }; pmc@d8130000 { @@ -98,12 +100,10 @@ interrupts = <43>; }; - fb@d800e400 { + fb: fb@d8050800 { compatible = "via,vt8500-fb"; reg = <0xd800e400 0x400>; interrupts = <12>; - display = <&display>; - default-mode = <&mode0>; }; ge_rops@d8050400 { diff --git a/arch/arm/boot/dts/wm8505-ref.dts b/arch/arm/boot/dts/wm8505-ref.dts index fd4e248074c6..edd2cec3d37f 100644 --- a/arch/arm/boot/dts/wm8505-ref.dts +++ b/arch/arm/boot/dts/wm8505-ref.dts @@ -11,26 +11,22 @@ / { model = "Wondermedia WM8505 Netbook"; +}; - /* - * Display node is based on Sascha Hauer's patch on dri-devel. - * Added a bpp property to calculate the size of the framebuffer - * until the binding is formalized. - */ - display: display@0 { - modes { - mode0: mode@0 { - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hfront-porch = <40>; - hsync-len = <0>; - vback-porch = <32>; - vfront-porch = <11>; - vsync-len = <1>; - clock = <0>; /* unused but required */ - bpp = <32>; /* non-standard but required */ - }; +&fb { + bits-per-pixel = <32>; + display-timings { + native-mode = <&timing0>; + timing0: 800x480 { + clock-frequency = <0>; /* unused but required */ + hactive = <800>; + vactive = <480>; + hfront-porch = <40>; + hback-porch = <88>; + hsync-len = <0>; + vback-porch = <32>; + vfront-porch = <11>; + vsync-len = <1>; }; }; }; diff --git a/arch/arm/boot/dts/wm8505.dtsi b/arch/arm/boot/dts/wm8505.dtsi index e74a1c0fb9a2..b2bf359e852f 100644 --- a/arch/arm/boot/dts/wm8505.dtsi +++ b/arch/arm/boot/dts/wm8505.dtsi @@ -40,11 +40,13 @@ interrupts = <56 57 58 59 60 61 62 63>; }; - gpio: gpio-controller@d8110000 { - compatible = "wm,wm8505-gpio"; - gpio-controller; + pinctrl: pinctrl@d8110000 { + compatible = "wm,wm8505-pinctrl"; reg = <0xd8110000 0x10000>; - #gpio-cells = <3>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; }; pmc@d8130000 { @@ -60,6 +62,19 @@ clock-frequency = <24000000>; }; + ref25: ref25M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <25000000>; + }; + + pllb: pllb { + #clock-cells = <0>; + compatible = "via,vt8500-pll-clock"; + clocks = <&ref25>; + reg = <0x204>; + }; + clkuart0: uart0 { #clock-cells = <0>; compatible = "via,vt8500-device-clock"; @@ -107,6 +122,16 @@ enable-reg = <0x250>; enable-bit = <23>; }; + + clksdhc: sdhc { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&pllb>; + divisor-reg = <0x328>; + divisor-mask = <0x3f>; + enable-reg = <0x254>; + enable-bit = <18>; + }; }; }; @@ -128,11 +153,9 @@ interrupts = <0>; }; - fb@d8050800 { + fb: fb@d8050800 { compatible = "wm,wm8505-fb"; reg = <0xd8050800 0x200>; - display = <&display>; - default-mode = <&mode0>; }; ge_rops@d8050400 { @@ -187,5 +210,13 @@ reg = <0xd8100000 0x10000>; interrupts = <48>; }; + + sdhc@d800a000 { + compatible = "wm,wm8505-sdhc"; + reg = <0xd800a000 0x1000>; + interrupts = <20 21>; + clocks = <&clksdhc>; + bus-width = <4>; + }; }; }; diff --git a/arch/arm/boot/dts/wm8650-mid.dts b/arch/arm/boot/dts/wm8650-mid.dts index cefd938f842f..61671a0d9ede 100644 --- a/arch/arm/boot/dts/wm8650-mid.dts +++ b/arch/arm/boot/dts/wm8650-mid.dts @@ -11,26 +11,24 @@ / { model = "Wondermedia WM8650-MID Tablet"; +}; + +&fb { + bits-per-pixel = <16>; - /* - * Display node is based on Sascha Hauer's patch on dri-devel. - * Added a bpp property to calculate the size of the framebuffer - * until the binding is formalized. - */ - display: display@0 { - modes { - mode0: mode@0 { - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hfront-porch = <40>; - hsync-len = <0>; - vback-porch = <32>; - vfront-porch = <11>; - vsync-len = <1>; - clock = <0>; /* unused but required */ - bpp = <16>; /* non-standard but required */ - }; + display-timings { + native-mode = <&timing0>; + timing0: 800x480 { + clock-frequency = <0>; /* unused but required */ + hactive = <800>; + vactive = <480>; + hfront-porch = <40>; + hback-porch = <88>; + hsync-len = <0>; + vback-porch = <32>; + vfront-porch = <11>; + vsync-len = <1>; }; }; }; + diff --git a/arch/arm/boot/dts/wm8650.dtsi b/arch/arm/boot/dts/wm8650.dtsi index db3c0a12e052..dd8464eeb40d 100644 --- a/arch/arm/boot/dts/wm8650.dtsi +++ b/arch/arm/boot/dts/wm8650.dtsi @@ -34,11 +34,13 @@ interrupts = <56 57 58 59 60 61 62 63>; }; - gpio: gpio-controller@d8110000 { - compatible = "wm,wm8650-gpio"; - gpio-controller; + pinctrl: pinctrl@d8110000 { + compatible = "wm,wm8650-pinctrl"; reg = <0xd8110000 0x10000>; - #gpio-cells = <3>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; }; pmc@d8130000 { @@ -128,11 +130,9 @@ interrupts = <43>; }; - fb@d8050800 { + fb: fb@d8050800 { compatible = "wm,wm8505-fb"; reg = <0xd8050800 0x200>; - display = <&display>; - default-mode = <&mode0>; }; ge_rops@d8050400 { diff --git a/arch/arm/boot/dts/wm8850-w70v2.dts b/arch/arm/boot/dts/wm8850-w70v2.dts index fcc660c89540..32d22532cd6c 100644 --- a/arch/arm/boot/dts/wm8850-w70v2.dts +++ b/arch/arm/boot/dts/wm8850-w70v2.dts @@ -15,28 +15,6 @@ / { model = "Wondermedia WM8850-W70v2 Tablet"; - /* - * Display node is based on Sascha Hauer's patch on dri-devel. - * Added a bpp property to calculate the size of the framebuffer - * until the binding is formalized. - */ - display: display@0 { - modes { - mode0: mode@0 { - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hfront-porch = <40>; - hsync-len = <0>; - vback-porch = <32>; - vfront-porch = <11>; - vsync-len = <1>; - clock = <0>; /* unused but required */ - bpp = <16>; /* non-standard but required */ - }; - }; - }; - backlight { compatible = "pwm-backlight"; pwms = <&pwm 0 50000 1>; /* duty inverted */ @@ -45,3 +23,21 @@ default-brightness-level = <5>; }; }; + +&fb { + bits-per-pixel = <16>; + display-timings { + native-mode = <&timing0>; + timing0: 800x480 { + clock-frequency = <0>; /* unused but required */ + hactive = <800>; + vactive = <480>; + hfront-porch = <40>; + hback-porch = <88>; + hsync-len = <0>; + vback-porch = <32>; + vfront-porch = <11>; + vsync-len = <1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/wm8850.dtsi b/arch/arm/boot/dts/wm8850.dtsi index e8cbfdc87bba..fc790d0aee66 100644 --- a/arch/arm/boot/dts/wm8850.dtsi +++ b/arch/arm/boot/dts/wm8850.dtsi @@ -41,11 +41,13 @@ interrupts = <56 57 58 59 60 61 62 63>; }; - gpio: gpio-controller@d8110000 { - compatible = "wm,wm8650-gpio"; - gpio-controller; + pinctrl: pinctrl@d8110000 { + compatible = "wm,wm8850-pinctrl"; reg = <0xd8110000 0x10000>; - #gpio-cells = <3>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; }; pmc@d8130000 { @@ -135,11 +137,9 @@ }; }; - fb@d8051700 { + fb: fb@d8051700 { compatible = "wm,wm8505-fb"; reg = <0xd8051700 0x200>; - display = <&display>; - default-mode = <&mode0>; }; ge_rops@d8050400 { diff --git a/arch/arm/boot/dts/xenvm-4.2.dts b/arch/arm/boot/dts/xenvm-4.2.dts index ec3f9528e180..336915151398 100644 --- a/arch/arm/boot/dts/xenvm-4.2.dts +++ b/arch/arm/boot/dts/xenvm-4.2.dts @@ -29,6 +29,19 @@ compatible = "arm,cortex-a15"; reg = <0>; }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <1>; + }; + }; + + psci { + compatible = "arm,psci"; + method = "hvc"; + cpu_off = <1>; + cpu_on = <2>; }; memory@80000000 { diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index 5914b5654591..14fb2e609bab 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -15,6 +15,13 @@ / { compatible = "xlnx,zynq-7000"; + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = <0 5 4>, <0 6 4>; + interrupt-parent = <&intc>; + reg = < 0xf8891000 0x1000 0xf8893000 0x1000 >; + }; + amba { compatible = "simple-bus"; #address-cells = <1>; @@ -111,56 +118,30 @@ }; ttc0: ttc0@f8001000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "xlnx,ttc"; + interrupt-parent = <&intc>; + interrupts = < 0 10 4 0 11 4 0 12 4 >; + compatible = "cdns,ttc"; reg = <0xF8001000 0x1000>; clocks = <&cpu_clk 3>; clock-names = "cpu_1x"; clock-ranges; - - ttc0_0: ttc0.0 { - status = "disabled"; - reg = <0>; - interrupts = <0 10 4>; - }; - ttc0_1: ttc0.1 { - status = "disabled"; - reg = <1>; - interrupts = <0 11 4>; - }; - ttc0_2: ttc0.2 { - status = "disabled"; - reg = <2>; - interrupts = <0 12 4>; - }; }; ttc1: ttc1@f8002000 { - #interrupt-parent = <&intc>; - #address-cells = <1>; - #size-cells = <0>; - compatible = "xlnx,ttc"; + interrupt-parent = <&intc>; + interrupts = < 0 37 4 0 38 4 0 39 4 >; + compatible = "cdns,ttc"; reg = <0xF8002000 0x1000>; clocks = <&cpu_clk 3>; clock-names = "cpu_1x"; clock-ranges; - - ttc1_0: ttc1.0 { - status = "disabled"; - reg = <0>; - interrupts = <0 37 4>; - }; - ttc1_1: ttc1.1 { - status = "disabled"; - reg = <1>; - interrupts = <0 38 4>; - }; - ttc1_2: ttc1.2 { - status = "disabled"; - reg = <2>; - interrupts = <0 39 4>; - }; }; + scutimer: scutimer@f8f00600 { + interrupt-parent = <&intc>; + interrupts = < 1 13 0x301 >; + compatible = "arm,cortex-a9-twd-timer"; + reg = < 0xf8f00600 0x20 >; + clocks = <&cpu_clk 1>; + } ; }; }; diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts index c772942a399a..86f44d5b0265 100644 --- a/arch/arm/boot/dts/zynq-zc702.dts +++ b/arch/arm/boot/dts/zynq-zc702.dts @@ -32,13 +32,3 @@ &ps_clk { clock-frequency = <33333330>; }; - -&ttc0_0 { - status = "ok"; - compatible = "xlnx,ttc-counter-clocksource"; -}; - -&ttc0_1 { - status = "ok"; - compatible = "xlnx,ttc-counter-clockevent"; -}; diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile index dc8dd0de5c0f..48434cbe3e89 100644 --- a/arch/arm/common/Makefile +++ b/arch/arm/common/Makefile @@ -2,6 +2,8 @@ # Makefile for the linux kernel. # +obj-y += firmware.o + obj-$(CONFIG_ICST) += icst.o obj-$(CONFIG_SA1111) += sa1111.o obj-$(CONFIG_PCI_HOST_VIA82C505) += via82c505.o @@ -11,3 +13,6 @@ obj-$(CONFIG_SHARP_PARAM) += sharpsl_param.o obj-$(CONFIG_SHARP_SCOOP) += scoop.o obj-$(CONFIG_PCI_HOST_ITE8152) += it8152.o obj-$(CONFIG_ARM_TIMER_SP804) += timer-sp.o +obj-$(CONFIG_MCPM) += mcpm_head.o mcpm_entry.o mcpm_platsmp.o vlock.o +AFLAGS_mcpm_head.o := -march=armv7-a +AFLAGS_vlock.o := -march=armv7-a diff --git a/arch/arm/common/firmware.c b/arch/arm/common/firmware.c new file mode 100644 index 000000000000..27ddccb1131f --- /dev/null +++ b/arch/arm/common/firmware.c @@ -0,0 +1,18 @@ +/* + * Copyright (C) 2012 Samsung Electronics. + * Kyungmin Park <kyungmin.park@samsung.com> + * Tomasz Figa <t.figa@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/suspend.h> + +#include <asm/firmware.h> + +static const struct firmware_ops default_firmware_ops; + +const struct firmware_ops *firmware_ops = &default_firmware_ops; diff --git a/arch/arm/common/mcpm_entry.c b/arch/arm/common/mcpm_entry.c new file mode 100644 index 000000000000..370236dd1a03 --- /dev/null +++ b/arch/arm/common/mcpm_entry.c @@ -0,0 +1,263 @@ +/* + * arch/arm/common/mcpm_entry.c -- entry point for multi-cluster PM + * + * Created by: Nicolas Pitre, March 2012 + * Copyright: (C) 2012-2013 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/irqflags.h> + +#include <asm/mcpm.h> +#include <asm/cacheflush.h> +#include <asm/idmap.h> +#include <asm/cputype.h> + +extern unsigned long mcpm_entry_vectors[MAX_NR_CLUSTERS][MAX_CPUS_PER_CLUSTER]; + +void mcpm_set_entry_vector(unsigned cpu, unsigned cluster, void *ptr) +{ + unsigned long val = ptr ? virt_to_phys(ptr) : 0; + mcpm_entry_vectors[cluster][cpu] = val; + sync_cache_w(&mcpm_entry_vectors[cluster][cpu]); +} + +static const struct mcpm_platform_ops *platform_ops; + +int __init mcpm_platform_register(const struct mcpm_platform_ops *ops) +{ + if (platform_ops) + return -EBUSY; + platform_ops = ops; + return 0; +} + +int mcpm_cpu_power_up(unsigned int cpu, unsigned int cluster) +{ + if (!platform_ops) + return -EUNATCH; /* try not to shadow power_up errors */ + might_sleep(); + return platform_ops->power_up(cpu, cluster); +} + +typedef void (*phys_reset_t)(unsigned long); + +void mcpm_cpu_power_down(void) +{ + phys_reset_t phys_reset; + + BUG_ON(!platform_ops); + BUG_ON(!irqs_disabled()); + + /* + * Do this before calling into the power_down method, + * as it might not always be safe to do afterwards. + */ + setup_mm_for_reboot(); + + platform_ops->power_down(); + + /* + * It is possible for a power_up request to happen concurrently + * with a power_down request for the same CPU. In this case the + * power_down method might not be able to actually enter a + * powered down state with the WFI instruction if the power_up + * method has removed the required reset condition. The + * power_down method is then allowed to return. We must perform + * a re-entry in the kernel as if the power_up method just had + * deasserted reset on the CPU. + * + * To simplify race issues, the platform specific implementation + * must accommodate for the possibility of unordered calls to + * power_down and power_up with a usage count. Therefore, if a + * call to power_up is issued for a CPU that is not down, then + * the next call to power_down must not attempt a full shutdown + * but only do the minimum (normally disabling L1 cache and CPU + * coherency) and return just as if a concurrent power_up request + * had happened as described above. + */ + + phys_reset = (phys_reset_t)(unsigned long)virt_to_phys(cpu_reset); + phys_reset(virt_to_phys(mcpm_entry_point)); + + /* should never get here */ + BUG(); +} + +void mcpm_cpu_suspend(u64 expected_residency) +{ + phys_reset_t phys_reset; + + BUG_ON(!platform_ops); + BUG_ON(!irqs_disabled()); + + /* Very similar to mcpm_cpu_power_down() */ + setup_mm_for_reboot(); + platform_ops->suspend(expected_residency); + phys_reset = (phys_reset_t)(unsigned long)virt_to_phys(cpu_reset); + phys_reset(virt_to_phys(mcpm_entry_point)); + BUG(); +} + +int mcpm_cpu_powered_up(void) +{ + if (!platform_ops) + return -EUNATCH; + if (platform_ops->powered_up) + platform_ops->powered_up(); + return 0; +} + +struct sync_struct mcpm_sync; + +/* + * __mcpm_cpu_going_down: Indicates that the cpu is being torn down. + * This must be called at the point of committing to teardown of a CPU. + * The CPU cache (SCTRL.C bit) is expected to still be active. + */ +void __mcpm_cpu_going_down(unsigned int cpu, unsigned int cluster) +{ + mcpm_sync.clusters[cluster].cpus[cpu].cpu = CPU_GOING_DOWN; + sync_cache_w(&mcpm_sync.clusters[cluster].cpus[cpu].cpu); +} + +/* + * __mcpm_cpu_down: Indicates that cpu teardown is complete and that the + * cluster can be torn down without disrupting this CPU. + * To avoid deadlocks, this must be called before a CPU is powered down. + * The CPU cache (SCTRL.C bit) is expected to be off. + * However L2 cache might or might not be active. + */ +void __mcpm_cpu_down(unsigned int cpu, unsigned int cluster) +{ + dmb(); + mcpm_sync.clusters[cluster].cpus[cpu].cpu = CPU_DOWN; + sync_cache_w(&mcpm_sync.clusters[cluster].cpus[cpu].cpu); + dsb_sev(); +} + +/* + * __mcpm_outbound_leave_critical: Leave the cluster teardown critical section. + * @state: the final state of the cluster: + * CLUSTER_UP: no destructive teardown was done and the cluster has been + * restored to the previous state (CPU cache still active); or + * CLUSTER_DOWN: the cluster has been torn-down, ready for power-off + * (CPU cache disabled, L2 cache either enabled or disabled). + */ +void __mcpm_outbound_leave_critical(unsigned int cluster, int state) +{ + dmb(); + mcpm_sync.clusters[cluster].cluster = state; + sync_cache_w(&mcpm_sync.clusters[cluster].cluster); + dsb_sev(); +} + +/* + * __mcpm_outbound_enter_critical: Enter the cluster teardown critical section. + * This function should be called by the last man, after local CPU teardown + * is complete. CPU cache expected to be active. + * + * Returns: + * false: the critical section was not entered because an inbound CPU was + * observed, or the cluster is already being set up; + * true: the critical section was entered: it is now safe to tear down the + * cluster. + */ +bool __mcpm_outbound_enter_critical(unsigned int cpu, unsigned int cluster) +{ + unsigned int i; + struct mcpm_sync_struct *c = &mcpm_sync.clusters[cluster]; + + /* Warn inbound CPUs that the cluster is being torn down: */ + c->cluster = CLUSTER_GOING_DOWN; + sync_cache_w(&c->cluster); + + /* Back out if the inbound cluster is already in the critical region: */ + sync_cache_r(&c->inbound); + if (c->inbound == INBOUND_COMING_UP) + goto abort; + + /* + * Wait for all CPUs to get out of the GOING_DOWN state, so that local + * teardown is complete on each CPU before tearing down the cluster. + * + * If any CPU has been woken up again from the DOWN state, then we + * shouldn't be taking the cluster down at all: abort in that case. + */ + sync_cache_r(&c->cpus); + for (i = 0; i < MAX_CPUS_PER_CLUSTER; i++) { + int cpustate; + + if (i == cpu) + continue; + + while (1) { + cpustate = c->cpus[i].cpu; + if (cpustate != CPU_GOING_DOWN) + break; + + wfe(); + sync_cache_r(&c->cpus[i].cpu); + } + + switch (cpustate) { + case CPU_DOWN: + continue; + + default: + goto abort; + } + } + + return true; + +abort: + __mcpm_outbound_leave_critical(cluster, CLUSTER_UP); + return false; +} + +int __mcpm_cluster_state(unsigned int cluster) +{ + sync_cache_r(&mcpm_sync.clusters[cluster].cluster); + return mcpm_sync.clusters[cluster].cluster; +} + +extern unsigned long mcpm_power_up_setup_phys; + +int __init mcpm_sync_init( + void (*power_up_setup)(unsigned int affinity_level)) +{ + unsigned int i, j, mpidr, this_cluster; + + BUILD_BUG_ON(MCPM_SYNC_CLUSTER_SIZE * MAX_NR_CLUSTERS != sizeof mcpm_sync); + BUG_ON((unsigned long)&mcpm_sync & (__CACHE_WRITEBACK_GRANULE - 1)); + + /* + * Set initial CPU and cluster states. + * Only one cluster is assumed to be active at this point. + */ + for (i = 0; i < MAX_NR_CLUSTERS; i++) { + mcpm_sync.clusters[i].cluster = CLUSTER_DOWN; + mcpm_sync.clusters[i].inbound = INBOUND_NOT_COMING_UP; + for (j = 0; j < MAX_CPUS_PER_CLUSTER; j++) + mcpm_sync.clusters[i].cpus[j].cpu = CPU_DOWN; + } + mpidr = read_cpuid_mpidr(); + this_cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); + for_each_online_cpu(i) + mcpm_sync.clusters[this_cluster].cpus[i].cpu = CPU_UP; + mcpm_sync.clusters[this_cluster].cluster = CLUSTER_UP; + sync_cache_w(&mcpm_sync); + + if (power_up_setup) { + mcpm_power_up_setup_phys = virt_to_phys(power_up_setup); + sync_cache_w(&mcpm_power_up_setup_phys); + } + + return 0; +} diff --git a/arch/arm/common/mcpm_head.S b/arch/arm/common/mcpm_head.S new file mode 100644 index 000000000000..8178705c4b24 --- /dev/null +++ b/arch/arm/common/mcpm_head.S @@ -0,0 +1,219 @@ +/* + * arch/arm/common/mcpm_head.S -- kernel entry point for multi-cluster PM + * + * Created by: Nicolas Pitre, March 2012 + * Copyright: (C) 2012-2013 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * + * Refer to Documentation/arm/cluster-pm-race-avoidance.txt + * for details of the synchronisation algorithms used here. + */ + +#include <linux/linkage.h> +#include <asm/mcpm.h> + +#include "vlock.h" + +.if MCPM_SYNC_CLUSTER_CPUS +.error "cpus must be the first member of struct mcpm_sync_struct" +.endif + + .macro pr_dbg string +#if defined(CONFIG_DEBUG_LL) && defined(DEBUG) + b 1901f +1902: .asciz "CPU" +1903: .asciz " cluster" +1904: .asciz ": \string" + .align +1901: adr r0, 1902b + bl printascii + mov r0, r9 + bl printhex8 + adr r0, 1903b + bl printascii + mov r0, r10 + bl printhex8 + adr r0, 1904b + bl printascii +#endif + .endm + + .arm + .align + +ENTRY(mcpm_entry_point) + + THUMB( adr r12, BSYM(1f) ) + THUMB( bx r12 ) + THUMB( .thumb ) +1: + mrc p15, 0, r0, c0, c0, 5 @ MPIDR + ubfx r9, r0, #0, #8 @ r9 = cpu + ubfx r10, r0, #8, #8 @ r10 = cluster + mov r3, #MAX_CPUS_PER_CLUSTER + mla r4, r3, r10, r9 @ r4 = canonical CPU index + cmp r4, #(MAX_CPUS_PER_CLUSTER * MAX_NR_CLUSTERS) + blo 2f + + /* We didn't expect this CPU. Try to cheaply make it quiet. */ +1: wfi + wfe + b 1b + +2: pr_dbg "kernel mcpm_entry_point\n" + + /* + * MMU is off so we need to get to various variables in a + * position independent way. + */ + adr r5, 3f + ldmia r5, {r6, r7, r8, r11} + add r6, r5, r6 @ r6 = mcpm_entry_vectors + ldr r7, [r5, r7] @ r7 = mcpm_power_up_setup_phys + add r8, r5, r8 @ r8 = mcpm_sync + add r11, r5, r11 @ r11 = first_man_locks + + mov r0, #MCPM_SYNC_CLUSTER_SIZE + mla r8, r0, r10, r8 @ r8 = sync cluster base + + @ Signal that this CPU is coming UP: + mov r0, #CPU_COMING_UP + mov r5, #MCPM_SYNC_CPU_SIZE + mla r5, r9, r5, r8 @ r5 = sync cpu address + strb r0, [r5] + + @ At this point, the cluster cannot unexpectedly enter the GOING_DOWN + @ state, because there is at least one active CPU (this CPU). + + mov r0, #VLOCK_SIZE + mla r11, r0, r10, r11 @ r11 = cluster first man lock + mov r0, r11 + mov r1, r9 @ cpu + bl vlock_trylock @ implies DMB + + cmp r0, #0 @ failed to get the lock? + bne mcpm_setup_wait @ wait for cluster setup if so + + ldrb r0, [r8, #MCPM_SYNC_CLUSTER_CLUSTER] + cmp r0, #CLUSTER_UP @ cluster already up? + bne mcpm_setup @ if not, set up the cluster + + @ Otherwise, release the first man lock and skip setup: + mov r0, r11 + bl vlock_unlock + b mcpm_setup_complete + +mcpm_setup: + @ Control dependency implies strb not observable before previous ldrb. + + @ Signal that the cluster is being brought up: + mov r0, #INBOUND_COMING_UP + strb r0, [r8, #MCPM_SYNC_CLUSTER_INBOUND] + dmb + + @ Any CPU trying to take the cluster into CLUSTER_GOING_DOWN from this + @ point onwards will observe INBOUND_COMING_UP and abort. + + @ Wait for any previously-pending cluster teardown operations to abort + @ or complete: +mcpm_teardown_wait: + ldrb r0, [r8, #MCPM_SYNC_CLUSTER_CLUSTER] + cmp r0, #CLUSTER_GOING_DOWN + bne first_man_setup + wfe + b mcpm_teardown_wait + +first_man_setup: + dmb + + @ If the outbound gave up before teardown started, skip cluster setup: + + cmp r0, #CLUSTER_UP + beq mcpm_setup_leave + + @ power_up_setup is now responsible for setting up the cluster: + + cmp r7, #0 + mov r0, #1 @ second (cluster) affinity level + blxne r7 @ Call power_up_setup if defined + dmb + + mov r0, #CLUSTER_UP + strb r0, [r8, #MCPM_SYNC_CLUSTER_CLUSTER] + dmb + +mcpm_setup_leave: + @ Leave the cluster setup critical section: + + mov r0, #INBOUND_NOT_COMING_UP + strb r0, [r8, #MCPM_SYNC_CLUSTER_INBOUND] + dsb + sev + + mov r0, r11 + bl vlock_unlock @ implies DMB + b mcpm_setup_complete + + @ In the contended case, non-first men wait here for cluster setup + @ to complete: +mcpm_setup_wait: + ldrb r0, [r8, #MCPM_SYNC_CLUSTER_CLUSTER] + cmp r0, #CLUSTER_UP + wfene + bne mcpm_setup_wait + dmb + +mcpm_setup_complete: + @ If a platform-specific CPU setup hook is needed, it is + @ called from here. + + cmp r7, #0 + mov r0, #0 @ first (CPU) affinity level + blxne r7 @ Call power_up_setup if defined + dmb + + @ Mark the CPU as up: + + mov r0, #CPU_UP + strb r0, [r5] + + @ Observability order of CPU_UP and opening of the gate does not matter. + +mcpm_entry_gated: + ldr r5, [r6, r4, lsl #2] @ r5 = CPU entry vector + cmp r5, #0 + wfeeq + beq mcpm_entry_gated + dmb + + pr_dbg "released\n" + bx r5 + + .align 2 + +3: .word mcpm_entry_vectors - . + .word mcpm_power_up_setup_phys - 3b + .word mcpm_sync - 3b + .word first_man_locks - 3b + +ENDPROC(mcpm_entry_point) + + .bss + + .align CACHE_WRITEBACK_ORDER + .type first_man_locks, #object +first_man_locks: + .space VLOCK_SIZE * MAX_NR_CLUSTERS + .align CACHE_WRITEBACK_ORDER + + .type mcpm_entry_vectors, #object +ENTRY(mcpm_entry_vectors) + .space 4 * MAX_NR_CLUSTERS * MAX_CPUS_PER_CLUSTER + + .type mcpm_power_up_setup_phys, #object +ENTRY(mcpm_power_up_setup_phys) + .space 4 @ set by mcpm_sync_init() diff --git a/arch/arm/common/mcpm_platsmp.c b/arch/arm/common/mcpm_platsmp.c new file mode 100644 index 000000000000..52b88d81b7bb --- /dev/null +++ b/arch/arm/common/mcpm_platsmp.c @@ -0,0 +1,92 @@ +/* + * linux/arch/arm/mach-vexpress/mcpm_platsmp.c + * + * Created by: Nicolas Pitre, November 2012 + * Copyright: (C) 2012-2013 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Code to handle secondary CPU bringup and hotplug for the cluster power API. + */ + +#include <linux/init.h> +#include <linux/smp.h> +#include <linux/spinlock.h> + +#include <linux/irqchip/arm-gic.h> + +#include <asm/mcpm.h> +#include <asm/smp.h> +#include <asm/smp_plat.h> + +static void __init simple_smp_init_cpus(void) +{ +} + +static int __cpuinit mcpm_boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + unsigned int mpidr, pcpu, pcluster, ret; + extern void secondary_startup(void); + + mpidr = cpu_logical_map(cpu); + pcpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); + pcluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); + pr_debug("%s: logical CPU %d is physical CPU %d cluster %d\n", + __func__, cpu, pcpu, pcluster); + + mcpm_set_entry_vector(pcpu, pcluster, NULL); + ret = mcpm_cpu_power_up(pcpu, pcluster); + if (ret) + return ret; + mcpm_set_entry_vector(pcpu, pcluster, secondary_startup); + arch_send_wakeup_ipi_mask(cpumask_of(cpu)); + dsb_sev(); + return 0; +} + +static void __cpuinit mcpm_secondary_init(unsigned int cpu) +{ + mcpm_cpu_powered_up(); + gic_secondary_init(0); +} + +#ifdef CONFIG_HOTPLUG_CPU + +static int mcpm_cpu_disable(unsigned int cpu) +{ + /* + * We assume all CPUs may be shut down. + * This would be the hook to use for eventual Secure + * OS migration requests as described in the PSCI spec. + */ + return 0; +} + +static void mcpm_cpu_die(unsigned int cpu) +{ + unsigned int mpidr, pcpu, pcluster; + mpidr = read_cpuid_mpidr(); + pcpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); + pcluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); + mcpm_set_entry_vector(pcpu, pcluster, NULL); + mcpm_cpu_power_down(); +} + +#endif + +static struct smp_operations __initdata mcpm_smp_ops = { + .smp_init_cpus = simple_smp_init_cpus, + .smp_boot_secondary = mcpm_boot_secondary, + .smp_secondary_init = mcpm_secondary_init, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_disable = mcpm_cpu_disable, + .cpu_die = mcpm_cpu_die, +#endif +}; + +void __init mcpm_smp_set_ops(void) +{ + smp_set_ops(&mcpm_smp_ops); +} diff --git a/arch/arm/common/timer-sp.c b/arch/arm/common/timer-sp.c index 9d2d3ba339ff..ddc740769601 100644 --- a/arch/arm/common/timer-sp.c +++ b/arch/arm/common/timer-sp.c @@ -25,33 +25,29 @@ #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> #include <asm/sched_clock.h> #include <asm/hardware/arm_timer.h> +#include <asm/hardware/timer-sp.h> -static long __init sp804_get_clock_rate(const char *name) +static long __init sp804_get_clock_rate(struct clk *clk) { - struct clk *clk; long rate; int err; - clk = clk_get_sys("sp804", name); - if (IS_ERR(clk)) { - pr_err("sp804: %s clock not found: %d\n", name, - (int)PTR_ERR(clk)); - return PTR_ERR(clk); - } - err = clk_prepare(clk); if (err) { - pr_err("sp804: %s clock failed to prepare: %d\n", name, err); + pr_err("sp804: clock failed to prepare: %d\n", err); clk_put(clk); return err; } err = clk_enable(clk); if (err) { - pr_err("sp804: %s clock failed to enable: %d\n", name, err); + pr_err("sp804: clock failed to enable: %d\n", err); clk_unprepare(clk); clk_put(clk); return err; @@ -59,7 +55,7 @@ static long __init sp804_get_clock_rate(const char *name) rate = clk_get_rate(clk); if (rate < 0) { - pr_err("sp804: %s clock failed to get rate: %ld\n", name, rate); + pr_err("sp804: clock failed to get rate: %ld\n", rate); clk_disable(clk); clk_unprepare(clk); clk_put(clk); @@ -77,9 +73,21 @@ static u32 sp804_read(void) void __init __sp804_clocksource_and_sched_clock_init(void __iomem *base, const char *name, + struct clk *clk, int use_sched_clock) { - long rate = sp804_get_clock_rate(name); + long rate; + + if (!clk) { + clk = clk_get_sys("sp804", name); + if (IS_ERR(clk)) { + pr_err("sp804: clock not found: %d\n", + (int)PTR_ERR(clk)); + return; + } + } + + rate = sp804_get_clock_rate(clk); if (rate < 0) return; @@ -171,12 +179,20 @@ static struct irqaction sp804_timer_irq = { .dev_id = &sp804_clockevent, }; -void __init sp804_clockevents_init(void __iomem *base, unsigned int irq, - const char *name) +void __init __sp804_clockevents_init(void __iomem *base, unsigned int irq, struct clk *clk, const char *name) { struct clock_event_device *evt = &sp804_clockevent; - long rate = sp804_get_clock_rate(name); + long rate; + if (!clk) + clk = clk_get_sys("sp804", name); + if (IS_ERR(clk)) { + pr_err("sp804: %s clock not found: %d\n", name, + (int)PTR_ERR(clk)); + return; + } + + rate = sp804_get_clock_rate(clk); if (rate < 0) return; @@ -186,6 +202,98 @@ void __init sp804_clockevents_init(void __iomem *base, unsigned int irq, evt->irq = irq; evt->cpumask = cpu_possible_mask; + writel(0, base + TIMER_CTRL); + setup_irq(irq, &sp804_timer_irq); clockevents_config_and_register(evt, rate, 0xf, 0xffffffff); } + +static void __init sp804_of_init(struct device_node *np) +{ + static bool initialized = false; + void __iomem *base; + int irq; + u32 irq_num = 0; + struct clk *clk1, *clk2; + const char *name = of_get_property(np, "compatible", NULL); + + base = of_iomap(np, 0); + if (WARN_ON(!base)) + return; + + /* Ensure timers are disabled */ + writel(0, base + TIMER_CTRL); + writel(0, base + TIMER_2_BASE + TIMER_CTRL); + + if (initialized || !of_device_is_available(np)) + goto err; + + clk1 = of_clk_get(np, 0); + if (IS_ERR(clk1)) + clk1 = NULL; + + /* Get the 2nd clock if the timer has 2 timer clocks */ + if (of_count_phandle_with_args(np, "clocks", "#clock-cells") == 3) { + clk2 = of_clk_get(np, 1); + if (IS_ERR(clk2)) { + pr_err("sp804: %s clock not found: %d\n", np->name, + (int)PTR_ERR(clk2)); + goto err; + } + } else + clk2 = clk1; + + irq = irq_of_parse_and_map(np, 0); + if (irq <= 0) + goto err; + + of_property_read_u32(np, "arm,sp804-has-irq", &irq_num); + if (irq_num == 2) { + __sp804_clockevents_init(base + TIMER_2_BASE, irq, clk2, name); + __sp804_clocksource_and_sched_clock_init(base, name, clk1, 1); + } else { + __sp804_clockevents_init(base, irq, clk1 , name); + __sp804_clocksource_and_sched_clock_init(base + TIMER_2_BASE, + name, clk2, 1); + } + initialized = true; + + return; +err: + iounmap(base); +} +CLOCKSOURCE_OF_DECLARE(sp804, "arm,sp804", sp804_of_init); + +static void __init integrator_cp_of_init(struct device_node *np) +{ + static int init_count = 0; + void __iomem *base; + int irq; + const char *name = of_get_property(np, "compatible", NULL); + + base = of_iomap(np, 0); + if (WARN_ON(!base)) + return; + + /* Ensure timer is disabled */ + writel(0, base + TIMER_CTRL); + + if (init_count == 2 || !of_device_is_available(np)) + goto err; + + if (!init_count) + sp804_clocksource_init(base, name); + else { + irq = irq_of_parse_and_map(np, 0); + if (irq <= 0) + goto err; + + sp804_clockevents_init(base, irq, name); + } + + init_count++; + return; +err: + iounmap(base); +} +CLOCKSOURCE_OF_DECLARE(intcp, "arm,integrator-cp-timer", integrator_cp_of_init); diff --git a/arch/arm/common/vlock.S b/arch/arm/common/vlock.S new file mode 100644 index 000000000000..ff198583f683 --- /dev/null +++ b/arch/arm/common/vlock.S @@ -0,0 +1,108 @@ +/* + * vlock.S - simple voting lock implementation for ARM + * + * Created by: Dave Martin, 2012-08-16 + * Copyright: (C) 2012-2013 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * + * This algorithm is described in more detail in + * Documentation/arm/vlocks.txt. + */ + +#include <linux/linkage.h> +#include "vlock.h" + +/* Select different code if voting flags can fit in a single word. */ +#if VLOCK_VOTING_SIZE > 4 +#define FEW(x...) +#define MANY(x...) x +#else +#define FEW(x...) x +#define MANY(x...) +#endif + +@ voting lock for first-man coordination + +.macro voting_begin rbase:req, rcpu:req, rscratch:req + mov \rscratch, #1 + strb \rscratch, [\rbase, \rcpu] + dmb +.endm + +.macro voting_end rbase:req, rcpu:req, rscratch:req + dmb + mov \rscratch, #0 + strb \rscratch, [\rbase, \rcpu] + dsb + sev +.endm + +/* + * The vlock structure must reside in Strongly-Ordered or Device memory. + * This implementation deliberately eliminates most of the barriers which + * would be required for other memory types, and assumes that independent + * writes to neighbouring locations within a cacheline do not interfere + * with one another. + */ + +@ r0: lock structure base +@ r1: CPU ID (0-based index within cluster) +ENTRY(vlock_trylock) + add r1, r1, #VLOCK_VOTING_OFFSET + + voting_begin r0, r1, r2 + + ldrb r2, [r0, #VLOCK_OWNER_OFFSET] @ check whether lock is held + cmp r2, #VLOCK_OWNER_NONE + bne trylock_fail @ fail if so + + @ Control dependency implies strb not observable before previous ldrb. + + strb r1, [r0, #VLOCK_OWNER_OFFSET] @ submit my vote + + voting_end r0, r1, r2 @ implies DMB + + @ Wait for the current round of voting to finish: + + MANY( mov r3, #VLOCK_VOTING_OFFSET ) +0: + MANY( ldr r2, [r0, r3] ) + FEW( ldr r2, [r0, #VLOCK_VOTING_OFFSET] ) + cmp r2, #0 + wfene + bne 0b + MANY( add r3, r3, #4 ) + MANY( cmp r3, #VLOCK_VOTING_OFFSET + VLOCK_VOTING_SIZE ) + MANY( bne 0b ) + + @ Check who won: + + dmb + ldrb r2, [r0, #VLOCK_OWNER_OFFSET] + eor r0, r1, r2 @ zero if I won, else nonzero + bx lr + +trylock_fail: + voting_end r0, r1, r2 + mov r0, #1 @ nonzero indicates that I lost + bx lr +ENDPROC(vlock_trylock) + +@ r0: lock structure base +ENTRY(vlock_unlock) + dmb + mov r1, #VLOCK_OWNER_NONE + strb r1, [r0, #VLOCK_OWNER_OFFSET] + dsb + sev + bx lr +ENDPROC(vlock_unlock) diff --git a/arch/arm/common/vlock.h b/arch/arm/common/vlock.h new file mode 100644 index 000000000000..3b441475a59b --- /dev/null +++ b/arch/arm/common/vlock.h @@ -0,0 +1,29 @@ +/* + * vlock.h - simple voting lock implementation + * + * Created by: Dave Martin, 2012-08-16 + * Copyright: (C) 2012-2013 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __VLOCK_H +#define __VLOCK_H + +#include <asm/mcpm.h> + +/* Offsets and sizes are rounded to a word (4 bytes) */ +#define VLOCK_OWNER_OFFSET 0 +#define VLOCK_VOTING_OFFSET 4 +#define VLOCK_VOTING_SIZE ((MAX_CPUS_PER_CLUSTER + 3) / 4 * 4) +#define VLOCK_SIZE (VLOCK_VOTING_OFFSET + VLOCK_VOTING_SIZE) +#define VLOCK_OWNER_NONE 0 + +#endif /* ! __VLOCK_H */ diff --git a/arch/arm/configs/ape6evm_defconfig b/arch/arm/configs/ape6evm_defconfig new file mode 100644 index 000000000000..dab5a7dfadc6 --- /dev/null +++ b/arch/arm/configs/ape6evm_defconfig @@ -0,0 +1,95 @@ +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_CGROUPS=y +CONFIG_CGROUP_SCHED=y +CONFIG_KALLSYMS_ALL=y +CONFIG_EMBEDDED=y +CONFIG_PERF_EVENTS=y +CONFIG_SLAB=y +# CONFIG_BLOCK is not set +CONFIG_ARCH_SHMOBILE=y +CONFIG_ARCH_R8A73A4=y +CONFIG_MACH_APE6EVM=y +# CONFIG_ARM_THUMB is not set +CONFIG_CPU_BPREDICT_DISABLE=y +CONFIG_PL310_ERRATA_588369=y +CONFIG_ARM_ERRATA_754322=y +CONFIG_SMP=y +CONFIG_SCHED_MC=y +CONFIG_HAVE_ARM_ARCH_TIMER=y +CONFIG_NR_CPUS=8 +CONFIG_AEABI=y +CONFIG_HIGHMEM=y +CONFIG_HIGHPTE=y +# CONFIG_HW_PERF_EVENTS is not set +# CONFIG_COMPACTION is not set +# CONFIG_CROSS_MEMORY_ATTACH is not set +CONFIG_ARM_APPENDED_DTB=y +CONFIG_VFP=y +CONFIG_NEON=y +CONFIG_BINFMT_MISC=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_XFRM_USER=y +CONFIG_NET_KEY=y +CONFIG_NET_KEY_MIGRATE=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_INET_LRO is not set +# CONFIG_IPV6_SIT is not set +CONFIG_NETFILTER=y +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_FW_LOADER_USER_HELPER is not set +CONFIG_NETDEVICES=y +# CONFIG_NET_CADENCE is not set +CONFIG_SMC91X=y +CONFIG_SMSC911X=y +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_SERIO is not set +CONFIG_SERIAL_NONSTANDARD=y +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=12 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_GPIO_SH_PFC=y +CONFIG_GPIOLIB=y +# CONFIG_HWMON is not set +CONFIG_THERMAL=y +CONFIG_RCAR_THERMAL=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_REGULATOR_GPIO=y +# CONFIG_HID is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_IOMMU_SUPPORT is not set +# CONFIG_DNOTIFY is not set +CONFIG_TMPFS=y +# CONFIG_MISC_FILESYSTEMS is not set +CONFIG_NFS_FS=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_NFS_V4_1=y +CONFIG_ROOT_NFS=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_ENABLE_DEFAULT_TRACERS=y +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=y +CONFIG_CRYPTO_TWOFISH=y +CONFIG_CRC_CCITT=y +CONFIG_CRC16=y +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=y +CONFIG_CRC7=y +CONFIG_LIBCRC32C=y diff --git a/arch/arm/configs/armadillo800eva_defconfig b/arch/arm/configs/armadillo800eva_defconfig index 0b98100d2ae7..0f2d80da7378 100644 --- a/arch/arm/configs/armadillo800eva_defconfig +++ b/arch/arm/configs/armadillo800eva_defconfig @@ -20,15 +20,19 @@ CONFIG_ARCH_R8A7740=y CONFIG_MACH_ARMADILLO800EVA=y # CONFIG_SH_TIMER_TMU is not set CONFIG_ARM_THUMB=y -CONFIG_CPU_BPREDICT_DISABLE=y CONFIG_CACHE_L2X0=y CONFIG_ARM_ERRATA_430973=y CONFIG_ARM_ERRATA_458693=y CONFIG_ARM_ERRATA_460075=y +CONFIG_PL310_ERRATA_588369=y CONFIG_ARM_ERRATA_720789=y +CONFIG_PL310_ERRATA_727915=y CONFIG_ARM_ERRATA_743622=y CONFIG_ARM_ERRATA_751472=y +CONFIG_PL310_ERRATA_753970=y CONFIG_ARM_ERRATA_754322=y +CONFIG_PL310_ERRATA_769419=y +CONFIG_ARM_ERRATA_775420=y CONFIG_AEABI=y # CONFIG_OABI_COMPAT is not set CONFIG_FORCE_MAX_ZONEORDER=13 @@ -37,6 +41,7 @@ CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y CONFIG_KEXEC=y CONFIG_VFP=y +CONFIG_NEON=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_PM_RUNTIME=y CONFIG_NET=y @@ -88,6 +93,7 @@ CONFIG_I2C=y CONFIG_I2C_GPIO=y CONFIG_I2C_SH_MOBILE=y # CONFIG_HWMON is not set +CONFIG_REGULATOR=y CONFIG_MEDIA_SUPPORT=y CONFIG_VIDEO_DEV=y CONFIG_MEDIA_CAMERA_SUPPORT=y diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig index 1ea959019fcd..047f2a415309 100644 --- a/arch/arm/configs/at91_dt_defconfig +++ b/arch/arm/configs/at91_dt_defconfig @@ -20,7 +20,7 @@ CONFIG_SOC_AT91SAM9263=y CONFIG_SOC_AT91SAM9G45=y CONFIG_SOC_AT91SAM9X5=y CONFIG_SOC_AT91SAM9N12=y -CONFIG_MACH_AT91SAM_DT=y +CONFIG_MACH_AT91SAM9_DT=y CONFIG_AT91_PROGRAMMABLE_CLOCKS=y CONFIG_AT91_TIMER_HZ=128 CONFIG_AEABI=y diff --git a/arch/arm/configs/at91sam9260_defconfig b/arch/arm/configs/at91sam9260_defconfig index 0ea5d2c97fc4..05618eb694f8 100644 --- a/arch/arm/configs/at91sam9260_defconfig +++ b/arch/arm/configs/at91sam9260_defconfig @@ -22,7 +22,7 @@ CONFIG_MACH_QIL_A9260=y CONFIG_MACH_CPU9260=y CONFIG_MACH_FLEXIBITY=y CONFIG_MACH_SNAPPER_9260=y -CONFIG_MACH_AT91SAM_DT=y +CONFIG_MACH_AT91SAM9_DT=y CONFIG_AT91_PROGRAMMABLE_CLOCKS=y # CONFIG_ARM_THUMB is not set CONFIG_ZBOOT_ROM_TEXT=0x0 diff --git a/arch/arm/configs/at91sam9g20_defconfig b/arch/arm/configs/at91sam9g20_defconfig index 3b1881033ad8..892e8287ed73 100644 --- a/arch/arm/configs/at91sam9g20_defconfig +++ b/arch/arm/configs/at91sam9g20_defconfig @@ -22,7 +22,7 @@ CONFIG_MACH_PCONTROL_G20=y CONFIG_MACH_GSIA18S=y CONFIG_MACH_USB_A9G20=y CONFIG_MACH_SNAPPER_9260=y -CONFIG_MACH_AT91SAM_DT=y +CONFIG_MACH_AT91SAM9_DT=y CONFIG_AT91_PROGRAMMABLE_CLOCKS=y # CONFIG_ARM_THUMB is not set CONFIG_AEABI=y diff --git a/arch/arm/configs/at91sam9g45_defconfig b/arch/arm/configs/at91sam9g45_defconfig index 606d48f3b8f8..18964cdacd68 100644 --- a/arch/arm/configs/at91sam9g45_defconfig +++ b/arch/arm/configs/at91sam9g45_defconfig @@ -18,7 +18,7 @@ CONFIG_MODULE_UNLOAD=y CONFIG_ARCH_AT91=y CONFIG_ARCH_AT91SAM9G45=y CONFIG_MACH_AT91SAM9M10G45EK=y -CONFIG_MACH_AT91SAM_DT=y +CONFIG_MACH_AT91SAM9_DT=y CONFIG_AT91_PROGRAMMABLE_CLOCKS=y CONFIG_AT91_SLOW_CLOCK=y CONFIG_AEABI=y @@ -173,7 +173,6 @@ CONFIG_MMC=y # CONFIG_MMC_BLOCK_BOUNCE is not set CONFIG_SDIO_UART=m CONFIG_MMC_ATMELMCI=y -CONFIG_MMC_ATMELMCI_DMA=y CONFIG_LEDS_ATMEL_PWM=y CONFIG_LEDS_GPIO=y CONFIG_LEDS_TRIGGER_TIMER=y diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig index af472e4ed451..ce987211a609 100644 --- a/arch/arm/configs/bcm2835_defconfig +++ b/arch/arm/configs/bcm2835_defconfig @@ -29,6 +29,8 @@ CONFIG_EMBEDDED=y CONFIG_PROFILING=y CONFIG_OPROFILE=y CONFIG_JUMP_LABEL=y +CONFIG_ARCH_MULTI_V6=y +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_BCM2835=y CONFIG_PREEMPT_VOLUNTARY=y CONFIG_AEABI=y @@ -59,10 +61,13 @@ CONFIG_DEVTMPFS_MOUNT=y CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y CONFIG_TTY_PRINTK=y -# CONFIG_HW_RANDOM is not set +CONFIG_HW_RANDOM=y +CONFIG_HW_RANDOM_BCM2835=y CONFIG_I2C=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_BCM2835=y +CONFIG_SPI=y +CONFIG_SPI_BCM2835=y CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set # CONFIG_USB_SUPPORT is not set @@ -108,9 +113,5 @@ CONFIG_TEST_KSTRTOX=y CONFIG_STRICT_DEVMEM=y CONFIG_DEBUG_LL=y CONFIG_EARLY_PRINTK=y -# CONFIG_XZ_DEC_X86 is not set -# CONFIG_XZ_DEC_POWERPC is not set -# CONFIG_XZ_DEC_IA64 is not set # CONFIG_XZ_DEC_ARM is not set # CONFIG_XZ_DEC_ARMTHUMB is not set -# CONFIG_XZ_DEC_SPARC is not set diff --git a/arch/arm/configs/bockw_defconfig b/arch/arm/configs/bockw_defconfig new file mode 100644 index 000000000000..6524cdf3b08d --- /dev/null +++ b/arch/arm/configs/bockw_defconfig @@ -0,0 +1,94 @@ +# CONFIG_ARM_PATCH_PHYS_VIRT is not set +CONFIG_KERNEL_LZMA=y +CONFIG_NO_HZ=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_SYSCTL_SYSCALL=y +CONFIG_EMBEDDED=y +CONFIG_SLAB=y +# CONFIG_IOSCHED_CFQ is not set +CONFIG_ARCH_SHMOBILE=y +CONFIG_ARCH_R8A7778=y +CONFIG_MACH_BOCKW=y +CONFIG_MEMORY_START=0x60000000 +CONFIG_MEMORY_SIZE=0x10000000 +CONFIG_SHMOBILE_TIMER_HZ=1024 +# CONFIG_SH_TIMER_CMT is not set +# CONFIG_EM_TIMER_STI is not set +CONFIG_ARM_ERRATA_430973=y +CONFIG_ARM_ERRATA_458693=y +CONFIG_ARM_ERRATA_460075=y +CONFIG_ARM_ERRATA_743622=y +CONFIG_ARM_ERRATA_754322=y +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +CONFIG_HIGHMEM=y +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_ARM_APPENDED_DTB=y +CONFIG_CMDLINE="console=ttySC0,115200 ignore_loglevel root=/dev/nfs ip=dhcp" +CONFIG_CMDLINE_FORCE=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_SUSPEND is not set +CONFIG_NET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_IPV6 is not set +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +# CONFIG_FW_LOADER is not set +CONFIG_NETDEVICES=y +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CIRRUS is not set +# CONFIG_NET_VENDOR_FARADAY is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +CONFIG_SMSC911X=y +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_WIZNET is not set +# CONFIG_INPUT is not set +# CONFIG_SERIO is not set +# CONFIG_VT is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_DEVKMEM is not set +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=6 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +# CONFIG_HW_RANDOM is not set +# CONFIG_HWMON is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_UIO=y +CONFIG_UIO_PDRV_GENIRQ=y +# CONFIG_IOMMU_SUPPORT is not set +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY_USER is not set +CONFIG_TMPFS=y +# CONFIG_MISC_FILESYSTEMS is not set +CONFIG_NFS_FS=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_NFS_SWAP=y +CONFIG_NFS_V4_1=y +CONFIG_ROOT_NFS=y +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +# CONFIG_SCHED_DEBUG is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_FTRACE is not set +# CONFIG_ARM_UNWIND is not set +CONFIG_AVERAGE=y diff --git a/arch/arm/configs/cns3420vb_defconfig b/arch/arm/configs/cns3420vb_defconfig index 313627adf46c..b1ff5cdba9a1 100644 --- a/arch/arm/configs/cns3420vb_defconfig +++ b/arch/arm/configs/cns3420vb_defconfig @@ -19,8 +19,11 @@ CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_BLK_DEV_BSG is not set CONFIG_IOSCHED_CFQ=m +CONFIG_ARCH_MULTI_V6=y +#CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_CNS3XXX=y CONFIG_MACH_CNS3420VB=y +CONFIG_DEBUG_CNS3XXX=y CONFIG_AEABI=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 diff --git a/arch/arm/configs/da8xx_omapl_defconfig b/arch/arm/configs/da8xx_omapl_defconfig index 9aaad36a1728..7c868139bdb0 100644 --- a/arch/arm/configs/da8xx_omapl_defconfig +++ b/arch/arm/configs/da8xx_omapl_defconfig @@ -5,6 +5,7 @@ CONFIG_POSIX_MQUEUE=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 +CONFIG_CGROUPS=y CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y CONFIG_MODULES=y diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig index 3edc78a40b66..c86fd75e181a 100644 --- a/arch/arm/configs/davinci_all_defconfig +++ b/arch/arm/configs/davinci_all_defconfig @@ -5,6 +5,7 @@ CONFIG_POSIX_MQUEUE=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 +CONFIG_CGROUPS=y CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y CONFIG_MODULES=y diff --git a/arch/arm/configs/dove_defconfig b/arch/arm/configs/dove_defconfig index 3fe8dae8d32d..4364eff5b01e 100644 --- a/arch/arm/configs/dove_defconfig +++ b/arch/arm/configs/dove_defconfig @@ -75,6 +75,8 @@ CONFIG_I2C_MV64XXX=y CONFIG_SPI=y CONFIG_SPI_ORION=y # CONFIG_HWMON is not set +CONFIG_THERMAL=y +CONFIG_DOVE_THERMAL=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y diff --git a/arch/arm/configs/h7201_defconfig b/arch/arm/configs/h7201_defconfig deleted file mode 100644 index bee94d29655e..000000000000 --- a/arch/arm/configs/h7201_defconfig +++ /dev/null @@ -1,27 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_MODULES=y -CONFIG_ARCH_H720X=y -CONFIG_ARCH_H7201=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_FPE_NWFPE=y -CONFIG_MTD=y -CONFIG_MTD_DEBUG=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_VGA_CONSOLE is not set -CONFIG_SOUND=m -CONFIG_EXT2_FS=y -CONFIG_JFFS2_FS=y -CONFIG_DEBUG_USER=y diff --git a/arch/arm/configs/h7202_defconfig b/arch/arm/configs/h7202_defconfig deleted file mode 100644 index e16d3f372e2a..000000000000 --- a/arch/arm/configs/h7202_defconfig +++ /dev/null @@ -1,47 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_MODULES=y -CONFIG_ARCH_H720X=y -CONFIG_ARCH_H7202=y -# CONFIG_ARM_THUMB is not set -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,19200" -CONFIG_FPE_NWFPE=y -CONFIG_FPE_NWFPE_XP=y -CONFIG_NET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IPV6 is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_H720X=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_FB=y -CONFIG_FB_MODE_HELPERS=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_USB_GADGET=m -CONFIG_USB_ZERO=m -CONFIG_USB_GADGETFS=m -CONFIG_USB_MASS_STORAGE=m -CONFIG_USB_G_SERIAL=m -CONFIG_EXT2_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_USER=y diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig index 02c657af4005..f07a847b00c9 100644 --- a/arch/arm/configs/imx_v4_v5_defconfig +++ b/arch/arm/configs/imx_v4_v5_defconfig @@ -109,6 +109,7 @@ CONFIG_I2C_IMX=y CONFIG_SPI=y CONFIG_SPI_IMX=y CONFIG_SPI_SPIDEV=y +CONFIG_GPIO_SYSFS=y CONFIG_W1=y CONFIG_W1_MASTER_MXC=y CONFIG_W1_SLAVE_THERM=y diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index e36b01025321..6ec010f248b5 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -9,6 +9,7 @@ CONFIG_CGROUPS=y CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y +CONFIG_PERF_EVENTS=y # CONFIG_SLUB_DEBUG is not set # CONFIG_COMPAT_BRK is not set CONFIG_MODULES=y @@ -188,6 +189,7 @@ CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_MXC=y CONFIG_USB_CHIPIDEA=y CONFIG_USB_CHIPIDEA_HOST=y +CONFIG_USB_PHY=y CONFIG_USB_MXS_PHY=y CONFIG_USB_STORAGE=y CONFIG_MMC=y diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig index 13482ea58b09..a1d8252e9ec7 100644 --- a/arch/arm/configs/kirkwood_defconfig +++ b/arch/arm/configs/kirkwood_defconfig @@ -10,45 +10,48 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set CONFIG_ARCH_KIRKWOOD=y +CONFIG_MACH_D2NET_V2=y CONFIG_MACH_DB88F6281_BP=y +CONFIG_MACH_DOCKSTAR=y +CONFIG_MACH_ESATA_SHEEVAPLUG=y +CONFIG_MACH_GURUPLUG=y +CONFIG_MACH_INETSPACE_V2=y +CONFIG_MACH_MV88F6281GTW_GE=y +CONFIG_MACH_NET2BIG_V2=y +CONFIG_MACH_NET5BIG_V2=y +CONFIG_MACH_NETSPACE_MAX_V2=y +CONFIG_MACH_NETSPACE_V2=y +CONFIG_MACH_OPENRD_BASE=y +CONFIG_MACH_OPENRD_CLIENT=y +CONFIG_MACH_OPENRD_ULTIMATE=y CONFIG_MACH_RD88F6192_NAS=y CONFIG_MACH_RD88F6281=y -CONFIG_MACH_MV88F6281GTW_GE=y CONFIG_MACH_SHEEVAPLUG=y -CONFIG_MACH_ESATA_SHEEVAPLUG=y -CONFIG_MACH_GURUPLUG=y -CONFIG_MACH_DREAMPLUG_DT=y -CONFIG_MACH_ICONNECT_DT=y +CONFIG_MACH_T5325=y +CONFIG_MACH_TS219=y +CONFIG_MACH_TS41X=y +CONFIG_MACH_CLOUDBOX_DT=y CONFIG_MACH_DLINK_KIRKWOOD_DT=y -CONFIG_MACH_IB62X0_DT=y -CONFIG_MACH_TS219_DT=y CONFIG_MACH_DOCKSTAR_DT=y +CONFIG_MACH_DREAMPLUG_DT=y CONFIG_MACH_GOFLEXNET_DT=y -CONFIG_MACH_LSXL_DT=y +CONFIG_MACH_GURUPLUG_DT=y +CONFIG_MACH_IB62X0_DT=y +CONFIG_MACH_ICONNECT_DT=y +CONFIG_MACH_INETSPACE_V2_DT=y CONFIG_MACH_IOMEGA_IX2_200_DT=y CONFIG_MACH_KM_KIRKWOOD_DT=y -CONFIG_MACH_INETSPACE_V2_DT=y +CONFIG_MACH_LSXL_DT=y CONFIG_MACH_MPLCEC4_DT=y -CONFIG_MACH_NETSPACE_V2_DT=y -CONFIG_MACH_NETSPACE_MAX_V2_DT=y CONFIG_MACH_NETSPACE_LITE_V2_DT=y +CONFIG_MACH_NETSPACE_MAX_V2_DT=y CONFIG_MACH_NETSPACE_MINI_V2_DT=y +CONFIG_MACH_NETSPACE_V2_DT=y +CONFIG_MACH_NSA310_DT=y CONFIG_MACH_OPENBLOCKS_A6_DT=y +CONFIG_MACH_READYNAS_DT=y CONFIG_MACH_TOPKICK_DT=y -CONFIG_MACH_TS219=y -CONFIG_MACH_TS41X=y -CONFIG_MACH_DOCKSTAR=y -CONFIG_MACH_OPENRD_BASE=y -CONFIG_MACH_OPENRD_CLIENT=y -CONFIG_MACH_OPENRD_ULTIMATE=y -CONFIG_MACH_NETSPACE_V2=y -CONFIG_MACH_INETSPACE_V2=y -CONFIG_MACH_NETSPACE_MAX_V2=y -CONFIG_MACH_D2NET_V2=y -CONFIG_MACH_NET2BIG_V2=y -CONFIG_MACH_NET5BIG_V2=y -CONFIG_MACH_T5325=y -CONFIG_MACH_NSA310_DT=y +CONFIG_MACH_TS219_DT=y # CONFIG_CPU_FEROCEON_OLD_ID is not set CONFIG_PREEMPT=y CONFIG_AEABI=y @@ -56,7 +59,6 @@ CONFIG_AEABI=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CPU_IDLE=y -CONFIG_CPU_IDLE_KIRKWOOD=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -119,6 +121,8 @@ CONFIG_SPI=y CONFIG_SPI_ORION=y CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set +CONFIG_THERMAL=y +CONFIG_KIRKWOOD_THERMAL=y CONFIG_WATCHDOG=y CONFIG_ORION_WATCHDOG=y CONFIG_HID_DRAGONRISE=y diff --git a/arch/arm/configs/kzm9g_defconfig b/arch/arm/configs/kzm9g_defconfig index 670c3b60f936..f6e585b353a4 100644 --- a/arch/arm/configs/kzm9g_defconfig +++ b/arch/arm/configs/kzm9g_defconfig @@ -33,7 +33,6 @@ CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_SMP=y CONFIG_SCHED_MC=y -CONFIG_PREEMPT=y CONFIG_AEABI=y # CONFIG_OABI_COMPAT is not set CONFIG_HIGHMEM=y @@ -86,7 +85,6 @@ CONFIG_I2C_SH_MOBILE=y CONFIG_GPIO_PCF857X=y # CONFIG_HWMON is not set CONFIG_REGULATOR=y -CONFIG_REGULATOR_DUMMY=y CONFIG_FB=y CONFIG_FB_SH_MOBILE_LCDC=y CONFIG_FRAMEBUFFER_CONSOLE=y diff --git a/arch/arm/configs/lpc32xx_defconfig b/arch/arm/configs/lpc32xx_defconfig index 92386b20bd09..398a367ffce8 100644 --- a/arch/arm/configs/lpc32xx_defconfig +++ b/arch/arm/configs/lpc32xx_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y @@ -18,6 +17,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set CONFIG_PARTITION_ADVANCED=y CONFIG_ARCH_LPC32XX=y +CONFIG_GPIO_PCA953X=y CONFIG_KEYBOARD_GPIO_POLLED=y CONFIG_PREEMPT=y CONFIG_AEABI=y @@ -48,6 +48,8 @@ CONFIG_IPV6=y CONFIG_IPV6_PRIVACY=y # CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y # CONFIG_FW_LOADER is not set CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y @@ -55,7 +57,6 @@ CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_MUSEUM_IDS=y CONFIG_MTD_NAND_SLC_LPC32XX=y CONFIG_MTD_NAND_MLC_LPC32XX=y CONFIG_BLK_DEV_LOOP=y @@ -70,7 +71,6 @@ CONFIG_BLK_DEV_SD=y CONFIG_NETDEVICES=y CONFIG_MII=y # CONFIG_NET_VENDOR_BROADCOM is not set -# CONFIG_NET_VENDOR_CHELSIO is not set # CONFIG_NET_VENDOR_CIRRUS is not set # CONFIG_NET_VENDOR_FARADAY is not set # CONFIG_NET_VENDOR_INTEL is not set @@ -84,7 +84,6 @@ CONFIG_LPC_ENET=y # CONFIG_NET_VENDOR_STMICRO is not set CONFIG_SMSC_PHY=y # CONFIG_WLAN is not set -CONFIG_INPUT_MATRIXKMAP=y # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_MOUSEDEV_SCREEN_X=240 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320 @@ -108,6 +107,19 @@ CONFIG_I2C_PNX=y CONFIG_SPI=y CONFIG_SPI_PL022=y CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_GENERIC_PLATFORM=y +CONFIG_GPIO_EM=y +CONFIG_GPIO_PL061=y +CONFIG_GPIO_MAX7300=y +CONFIG_GPIO_MAX732X=y +CONFIG_GPIO_PCF857X=y +CONFIG_GPIO_SX150X=y +CONFIG_GPIO_ADP5588=y +CONFIG_GPIO_ADNP=y +CONFIG_GPIO_MAX7301=y +CONFIG_GPIO_MCP23S08=y +CONFIG_GPIO_MC33880=y +CONFIG_GPIO_74X164=y CONFIG_SENSORS_DS620=y CONFIG_SENSORS_MAX6639=y CONFIG_WATCHDOG=y @@ -134,6 +146,7 @@ CONFIG_SND_DEBUG_VERBOSE=y # CONFIG_SND_SPI is not set CONFIG_SND_SOC=y CONFIG_USB=y +CONFIG_USB_PHY=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y @@ -143,6 +156,7 @@ CONFIG_USB_G_SERIAL=m CONFIG_MMC=y # CONFIG_MMC_BLOCK_BOUNCE is not set CONFIG_MMC_ARMMMCI=y +CONFIG_MMC_SPI=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_PCA9532=y diff --git a/arch/arm/configs/mackerel_defconfig b/arch/arm/configs/mackerel_defconfig index 7594b3aff259..9fb11895b2e2 100644 --- a/arch/arm/configs/mackerel_defconfig +++ b/arch/arm/configs/mackerel_defconfig @@ -75,6 +75,7 @@ CONFIG_I2C=y CONFIG_I2C_SH_MOBILE=y # CONFIG_HWMON is not set # CONFIG_MFD_SUPPORT is not set +CONFIG_REGULATOR=y CONFIG_FB=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_SH_MOBILE_LCDC=y @@ -94,6 +95,9 @@ CONFIG_USB_RENESAS_USBHS=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_RENESAS_USBHS_UDC=y +CONFIG_MMC=y +CONFIG_MMC_SDHI=y +CONFIG_MMC_SH_MMCIF=y CONFIG_DMADEVICES=y CONFIG_SH_DMAE=y CONFIG_EXT2_FS=y diff --git a/arch/arm/configs/marzen_defconfig b/arch/arm/configs/marzen_defconfig index afb17d630d44..494e70aeb9e1 100644 --- a/arch/arm/configs/marzen_defconfig +++ b/arch/arm/configs/marzen_defconfig @@ -49,6 +49,10 @@ CONFIG_DEVTMPFS_MOUNT=y # CONFIG_FW_LOADER is not set CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y +CONFIG_ATA=y +CONFIG_ATA_SFF=y +CONFIG_ATA_BMDMA=y +CONFIG_SATA_RCAR=y CONFIG_NETDEVICES=y # CONFIG_NET_VENDOR_BROADCOM is not set # CONFIG_NET_VENDOR_FARADAY is not set @@ -75,6 +79,7 @@ CONFIG_I2C_RCAR=y CONFIG_SPI=y CONFIG_SPI_SH_HSPI=y CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_RCAR=y # CONFIG_HWMON is not set CONFIG_THERMAL=y CONFIG_RCAR_THERMAL=y @@ -88,6 +93,9 @@ CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PLATFORM=y CONFIG_USB_EHCI_HCD_PLATFORM=y CONFIG_USB_STORAGE=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y CONFIG_UIO=y CONFIG_UIO_PDRV_GENIRQ=y # CONFIG_IOMMU_SUPPORT is not set diff --git a/arch/arm/configs/msm_defconfig b/arch/arm/configs/msm_defconfig index 2b8f7affc1eb..690b5f9c7462 100644 --- a/arch/arm/configs/msm_defconfig +++ b/arch/arm/configs/msm_defconfig @@ -1,72 +1,137 @@ -CONFIG_EXPERIMENTAL=y +CONFIG_SYSVIPC=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_BLK_DEV_INITRD=y -CONFIG_SLAB=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS_ALL=y +CONFIG_EMBEDDED=y +# CONFIG_SLUB_DEBUG is not set +# CONFIG_COMPAT_BRK is not set +CONFIG_PROFILING=y +CONFIG_OPROFILE=y +CONFIG_KPROBES=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_PARTITION_ADVANCED=y CONFIG_ARCH_MSM=y -CONFIG_MACH_HALIBUT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y +CONFIG_ARCH_MSM8X60=y +CONFIG_ARCH_MSM8960=y +CONFIG_SMP=y CONFIG_PREEMPT=y CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=64M console=ttyMSM,115200n8" -CONFIG_PM=y +CONFIG_HIGHMEM=y +CONFIG_HIGHPTE=y +CONFIG_CLEANCACHE=y +CONFIG_CC_STACKPROTECTOR=y +CONFIG_ARM_APPENDED_DTB=y +CONFIG_ARM_ATAG_DTB_COMPAT=y +CONFIG_AUTO_ZRELADDR=y +CONFIG_VFP=y +CONFIG_NEON=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_NET=y +CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_INET=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_DIAG is not set +# CONFIG_INET_LRO is not set # CONFIG_IPV6 is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y +CONFIG_CFG80211=y +CONFIG_RFKILL=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_SCSI=y +CONFIG_SCSI_TGT=y +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_SG=y +CONFIG_CHR_DEV_SCH=y +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_CONSTANTS=y +CONFIG_SCSI_LOGGING=y +CONFIG_SCSI_SCAN_ASYNC=y CONFIG_NETDEVICES=y CONFIG_DUMMY=y -CONFIG_NET_ETHERNET=y -CONFIG_SMC91X=y -CONFIG_PPP=y -CONFIG_PPP_ASYNC=y -CONFIG_PPP_DEFLATE=y -CONFIG_PPP_BSDCOMP=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_PHYLIB=y +CONFIG_SLIP=y +CONFIG_SLIP_COMPRESSED=y +CONFIG_SLIP_MODE_SLIP6=y +CONFIG_USB_USBNET=y +# CONFIG_USB_NET_AX8817X is not set +# CONFIG_USB_NET_ZAURUS is not set CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_INPUT_MOUSE is not set +# CONFIG_MOUSE_PS2 is not set +CONFIG_INPUT_JOYSTICK=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_INPUT_MISC=y -# CONFIG_SERIO is not set -CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_INPUT_UINPUT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_MSM=y CONFIG_SERIAL_MSM_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_HW_RANDOM is not set +CONFIG_HW_RANDOM=y CONFIG_I2C=y -# CONFIG_HWMON is not set -CONFIG_VIDEO_OUTPUT_CONTROL=y +CONFIG_I2C_CHARDEV=y +CONFIG_SPI=y +CONFIG_SSBI=y +CONFIG_DEBUG_GPIO=y +CONFIG_GPIO_SYSFS=y +CONFIG_POWER_SUPPLY=y +CONFIG_THERMAL=y +CONFIG_REGULATOR=y +CONFIG_MEDIA_SUPPORT=y CONFIG_FB=y -CONFIG_FB_MODE_HELPERS=y -CONFIG_FB_TILEBLITTING=y -CONFIG_FB_MSM=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_DYNAMIC_MINORS=y +# CONFIG_SND_ARM is not set +# CONFIG_SND_SPI is not set +# CONFIG_SND_USB is not set +CONFIG_SND_SOC=y +CONFIG_HID_BATTERY_STRENGTH=y +CONFIG_USB=y +CONFIG_USB_PHY=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y +CONFIG_USB_MON=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_MSM=y +CONFIG_USB_ACM=y +CONFIG_USB_SERIAL=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_DEBUG_FILES=y +CONFIG_USB_GADGET_VBUS_DRAW=500 CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_INOTIFY=y +CONFIG_RTC_CLASS=y +CONFIG_STAGING=y +CONFIG_MSM_IOMMU=y +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT4_FS=y +CONFIG_FUSE_FS=y +CONFIG_VFAT_FS=y CONFIG_TMPFS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_CIFS=y +CONFIG_PRINTK_TIME=y CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -CONFIG_SCHEDSTATS=y -CONFIG_DEBUG_MUTEXES=y -CONFIG_DEBUG_SPINLOCK_SLEEP=y +CONFIG_LOCKUP_DETECTOR=y +# CONFIG_DETECT_HUNG_TASK is not set +# CONFIG_SCHED_DEBUG is not set +CONFIG_TIMER_STATS=y CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_LL=y +CONFIG_DYNAMIC_DEBUG=y diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index e31d442343c8..2e67a272df70 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -3,13 +3,19 @@ CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_ARCH_MVEBU=y CONFIG_MACH_ARMADA_370=y +CONFIG_ARCH_SIRF=y CONFIG_MACH_ARMADA_XP=y CONFIG_ARCH_HIGHBANK=y CONFIG_ARCH_SOCFPGA=y CONFIG_ARCH_SUNXI=y +CONFIG_ARCH_WM8850=y # CONFIG_ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA is not set CONFIG_ARCH_ZYNQ=y CONFIG_ARM_ERRATA_754322=y +CONFIG_PLAT_SPEAR=y +CONFIG_ARCH_SPEAR13XX=y +CONFIG_MACH_SPEAR1310=y +CONFIG_MACH_SPEAR1340=y CONFIG_SMP=y CONFIG_ARM_ARCH_TIMER=y CONFIG_AEABI=y @@ -23,6 +29,7 @@ CONFIG_BLK_DEV_SD=y CONFIG_ATA=y CONFIG_SATA_HIGHBANK=y CONFIG_SATA_MV=y +CONFIG_SATA_AHCI_PLATFORM=y CONFIG_NETDEVICES=y CONFIG_NET_CALXEDA_XGMAC=y CONFIG_SMSC911X=y @@ -31,17 +38,26 @@ CONFIG_SERIO_AMBAKMI=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_DW=y +CONFIG_KEYBOARD_SPEAR=y CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_SERIAL_SIRFSOC=y +CONFIG_SERIAL_SIRFSOC_CONSOLE=y +CONFIG_SERIAL_VT8500=y +CONFIG_SERIAL_VT8500_CONSOLE=y CONFIG_IPMI_HANDLER=y CONFIG_IPMI_SI=y CONFIG_I2C=y CONFIG_I2C_DESIGNWARE_PLATFORM=y +CONFIG_I2C_SIRF=y CONFIG_SPI=y CONFIG_SPI_PL022=y +CONFIG_SPI_SIRF=y +CONFIG_GPIO_PL061=y CONFIG_FB=y CONFIG_FB_ARMCLCD=y +CONFIG_FB_WM8505=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_USB=y CONFIG_USB_ISP1760_HCD=y @@ -50,11 +66,18 @@ CONFIG_MMC=y CONFIG_MMC_ARMMMCI=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MMC_SDHCI_SPEAR=y +CONFIG_MMC_WMT=y CONFIG_EDAC=y CONFIG_EDAC_MM_EDAC=y CONFIG_EDAC_HIGHBANK_MC=y CONFIG_EDAC_HIGHBANK_L2=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_PL031=y +CONFIG_RTC_DRV_VT8500=y +CONFIG_PWM=y +CONFIG_PWM_VT8500=y CONFIG_DMADEVICES=y CONFIG_PL330_DMA=y +CONFIG_SIRF_DMA=y +CONFIG_DW_DMAC=y diff --git a/arch/arm/configs/mvebu_defconfig b/arch/arm/configs/mvebu_defconfig index 2ec8119cff73..f3e8ae001ff1 100644 --- a/arch/arm/configs/mvebu_defconfig +++ b/arch/arm/configs/mvebu_defconfig @@ -46,9 +46,16 @@ CONFIG_I2C_MV64XXX=y CONFIG_MTD=y CONFIG_MTD_CHAR=y CONFIG_MTD_M25P80=y +CONFIG_MTD_CFI=y +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_STAA=y +CONFIG_MTD_PHYSMAP_OF=y CONFIG_SERIAL_8250_DW=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y +CONFIG_THERMAL=y +CONFIG_ARMADA_THERMAL=y CONFIG_USB_SUPPORT=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y @@ -65,6 +72,8 @@ CONFIG_RTC_DRV_S35390A=y CONFIG_RTC_DRV_MV=y CONFIG_DMADEVICES=y CONFIG_MV_XOR=y +CONFIG_MEMORY=y +CONFIG_MVEBU_DEVBUS=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig index 6a99e30f81d2..1d6d8fb7f4a1 100644 --- a/arch/arm/configs/mxs_defconfig +++ b/arch/arm/configs/mxs_defconfig @@ -22,8 +22,8 @@ CONFIG_MODVERSIONS=y CONFIG_BLK_DEV_INTEGRITY=y # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_MXS=y -CONFIG_MACH_MXS_DT=y # CONFIG_ARM_THUMB is not set CONFIG_PREEMPT_VOLUNTARY=y CONFIG_AEABI=y @@ -75,7 +75,7 @@ CONFIG_REALTEK_PHY=y CONFIG_MICREL_PHY=y # CONFIG_WLAN is not set # CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_EVDEV=m +CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y @@ -99,6 +99,8 @@ CONFIG_SPI_MXS=y CONFIG_DEBUG_GPIO=y CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_STMP3XXX_RTC_WATCHDOG=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_FB=y @@ -120,8 +122,10 @@ CONFIG_USB_EHCI_HCD=y CONFIG_USB_CHIPIDEA=y CONFIG_USB_CHIPIDEA_HOST=y CONFIG_USB_STORAGE=y +CONFIG_USB_PHY=y CONFIG_USB_MXS_PHY=y CONFIG_MMC=y +CONFIG_MMC_UNSAFE_RESUME=y CONFIG_MMC_MXS=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y diff --git a/arch/arm/configs/nhk8815_defconfig b/arch/arm/configs/nhk8815_defconfig index 86cfd2959c47..b01e7632ed2e 100644 --- a/arch/arm/configs/nhk8815_defconfig +++ b/arch/arm/configs/nhk8815_defconfig @@ -1,11 +1,9 @@ -CONFIG_EXPERIMENTAL=y # CONFIG_LOCALVERSION_AUTO is not set # CONFIG_SWAP is not set CONFIG_SYSVIPC=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y CONFIG_KALLSYMS_ALL=y @@ -13,6 +11,7 @@ CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_NOMADIK=y CONFIG_MACH_NOMADIK_8815NHK=y CONFIG_PREEMPT=y @@ -20,7 +19,6 @@ CONFIG_AEABI=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_FPE_NWFPE=y -CONFIG_PM=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -32,14 +30,10 @@ CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_NET_IPIP=y -CONFIG_NET_IPGRE=y -CONFIG_NET_IPGRE_BROADCAST=y CONFIG_IP_MROUTE=y # CONFIG_INET_LRO is not set # CONFIG_IPV6 is not set CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m CONFIG_BT_RFCOMM=m CONFIG_BT_RFCOMM_TTY=y CONFIG_BT_BNEP=m @@ -53,14 +47,16 @@ CONFIG_BT_HCIVHCI=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y CONFIG_MTD_TESTS=m +CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y -CONFIG_MTD_NAND=y CONFIG_MTD_NAND_ECC_SMC=y +CONFIG_MTD_NAND=y CONFIG_MTD_NAND_FSMC=y CONFIG_MTD_ONENAND=y CONFIG_MTD_ONENAND_VERIFY_WRITE=y CONFIG_MTD_ONENAND_GENERIC=y +CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=y CONFIG_BLK_DEV_RAM=y @@ -72,47 +68,48 @@ CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y CONFIG_SCSI_SCAN_ASYNC=y CONFIG_NETDEVICES=y +CONFIG_NETCONSOLE=m CONFIG_TUN=y -CONFIG_NET_ETHERNET=y CONFIG_SMC91X=y CONFIG_PPP=m -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m CONFIG_PPP_MPPE=m CONFIG_PPPOE=m -CONFIG_NETCONSOLE=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m # CONFIG_INPUT_MOUSEDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set # CONFIG_MOUSE_PS2 is not set # CONFIG_SERIO is not set +# CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y +CONFIG_HW_RANDOM=y +CONFIG_HW_RANDOM_NOMADIK=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_GPIO=y +CONFIG_I2C_NOMADIK=y CONFIG_DEBUG_GPIO=y -CONFIG_PINCTRL_NOMADIK=y # CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set +CONFIG_MMC=y +CONFIG_MMC_CLKGATE=y +CONFIG_MMC_ARMMMCI=y CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_PL031=y +CONFIG_DMADEVICES=y +CONFIG_AMBA_PL08X=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y -CONFIG_INOTIFY=y CONFIG_FUSE_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_JFFS2_FS=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_ROOT_NFS=y -CONFIG_SMB_FS=m CONFIG_CIFS=m CONFIG_CIFS_WEAK_PW_HASH=y CONFIG_NLS_CODEPAGE_437=y @@ -120,12 +117,11 @@ CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_15=y # CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_DEBUG_KERNEL=y +CONFIG_DEBUG_FS=y # CONFIG_SCHED_DEBUG is not set # CONFIG_DEBUG_PREEMPT is not set # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=y CONFIG_CRYPTO_DES=y diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig index 42eab9a2a0fd..7e0ebb64a7f9 100644 --- a/arch/arm/configs/omap1_defconfig +++ b/arch/arm/configs/omap1_defconfig @@ -195,6 +195,7 @@ CONFIG_SND_SOC=y CONFIG_SND_OMAP_SOC=y # CONFIG_USB_HID is not set CONFIG_USB=y +CONFIG_USB_PHY=y CONFIG_USB_DEBUG=y CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index bd07864f14a0..33903ca0d879 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -93,6 +93,7 @@ CONFIG_BLK_DEV_RAM_SIZE=16384 CONFIG_SENSORS_LIS3LV02D=m CONFIG_SENSORS_TSL2550=m CONFIG_SENSORS_LIS3_I2C=m +CONFIG_BMP085_I2C=m CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig new file mode 100644 index 000000000000..4d0dc3c16063 --- /dev/null +++ b/arch/arm/configs/sama5_defconfig @@ -0,0 +1,181 @@ +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_IRQ_DOMAIN_DEBUG=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_EMBEDDED=y +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_LBDAF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_ARCH_AT91=y +CONFIG_SOC_SAM_V7=y +CONFIG_SOC_SAMA5D3=y +CONFIG_MACH_SAMA5_DT=y +CONFIG_AT91_PROGRAMMABLE_CLOCKS=y +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +CONFIG_UACCESS_WITH_MEMCPY=y +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw" +CONFIG_AUTO_ZRELADDR=y +CONFIG_VFP=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_PM_RUNTIME=y +CONFIG_PM_DEBUG=y +CONFIG_PM_ADVANCED_DEBUG=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_PNP=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +CONFIG_IPV6=y +# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET6_XFRM_MODE_TUNNEL is not set +# CONFIG_INET6_XFRM_MODE_BEET is not set +CONFIG_IPV6_SIT_6RD=y +CONFIG_CAN=y +CONFIG_CAN_AT91=y +CONFIG_CFG80211=y +CONFIG_MAC80211=y +CONFIG_MAC80211_LEDS=y +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_MTD=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_CFI=y +CONFIG_MTD_M25P80=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_ATMEL=y +CONFIG_MTD_UBI=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=4 +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_ATMEL_TCLIB=y +CONFIG_ATMEL_SSC=y +CONFIG_EEPROM_AT24=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_LOWLEVEL is not set +CONFIG_NETDEVICES=y +CONFIG_MII=y +CONFIG_MACB=y +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CIRRUS is not set +# CONFIG_NET_VENDOR_FARADAY is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_MICROCHIP is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_WIZNET is not set +CONFIG_MICREL_PHY=y +# CONFIG_WLAN is not set +# CONFIG_INPUT_MOUSEDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_KEYBOARD_ATKBD is not set +CONFIG_KEYBOARD_QT1070=y +CONFIG_KEYBOARD_GPIO=y +# CONFIG_INPUT_MOUSE is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ATMEL_MXT=y +CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y +# CONFIG_SERIO is not set +CONFIG_LEGACY_PTY_COUNT=4 +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +CONFIG_HW_RANDOM=y +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_AT91=y +CONFIG_I2C_GPIO=y +CONFIG_SPI=y +CONFIG_SPI_ATMEL=y +CONFIG_SPI_GPIO=y +CONFIG_GPIO_SYSFS=y +# CONFIG_HWMON is not set +CONFIG_SSB=m +CONFIG_FB=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_GENERIC is not set +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_HID_GENERIC is not set +CONFIG_USB=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_ACM=y +CONFIG_USB_STORAGE=y +CONFIG_USB_GADGET=y +CONFIG_USB_AT91=y +CONFIG_USB_MASS_STORAGE=m +CONFIG_MMC=y +# CONFIG_MMC_BLOCK_BOUNCE is not set +CONFIG_MMC_ATMELMCI=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_GPIO=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_AT91RM9200=y +CONFIG_DMADEVICES=y +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_IIO=y +CONFIG_AT91_ADC=y +CONFIG_EXT2_FS=y +CONFIG_FANOTIFY=y +CONFIG_VFAT_FS=y +CONFIG_TMPFS=y +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_SUMMARY=y +CONFIG_UBIFS_FS=y +CONFIG_NFS_FS=y +CONFIG_ROOT_NFS=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_850=y +CONFIG_NLS_ISO8859_1=y +CONFIG_STRIP_ASM_SYMS=y +CONFIG_DEBUG_FS=y +# CONFIG_SCHED_DEBUG is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_FTRACE is not set +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_LL=y +CONFIG_EARLY_PRINTK=y +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m +CONFIG_CRYPTO_DEV_ATMEL_AES=y +CONFIG_CRYPTO_DEV_ATMEL_TDES=y +CONFIG_CRYPTO_DEV_ATMEL_SHA=y +CONFIG_CRC_CCITT=m +CONFIG_CRC_ITU_T=m diff --git a/arch/arm/configs/spear3xx_defconfig b/arch/arm/configs/spear3xx_defconfig index 865980c5f212..7ff23a077f5d 100644 --- a/arch/arm/configs/spear3xx_defconfig +++ b/arch/arm/configs/spear3xx_defconfig @@ -6,7 +6,9 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_PARTITION_ADVANCED=y +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_PLAT_SPEAR=y +CONFIG_ARCH_SPEAR3XX=y CONFIG_MACH_SPEAR300=y CONFIG_MACH_SPEAR310=y CONFIG_MACH_SPEAR320=y diff --git a/arch/arm/configs/spear6xx_defconfig b/arch/arm/configs/spear6xx_defconfig index a2a1265f86b6..7822980d7d55 100644 --- a/arch/arm/configs/spear6xx_defconfig +++ b/arch/arm/configs/spear6xx_defconfig @@ -6,6 +6,7 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_PARTITION_ADVANCED=y +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_PLAT_SPEAR=y CONFIG_ARCH_SPEAR6XX=y CONFIG_BINFMT_MISC=y diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig index aba4881d20e5..a5f0485133cf 100644 --- a/arch/arm/configs/tegra_defconfig +++ b/arch/arm/configs/tegra_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y @@ -20,15 +19,14 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set CONFIG_PARTITION_ADVANCED=y -CONFIG_EFI_PARTITION=y # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set CONFIG_ARCH_TEGRA=y CONFIG_GPIO_PCA953X=y CONFIG_ARCH_TEGRA_2x_SOC=y CONFIG_ARCH_TEGRA_3x_SOC=y +CONFIG_ARCH_TEGRA_114_SOC=y CONFIG_TEGRA_PCI=y -CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA=y CONFIG_TEGRA_EMC_SCALING_ENABLE=y CONFIG_SMP=y CONFIG_PREEMPT=y @@ -37,8 +35,8 @@ CONFIG_AEABI=y CONFIG_HIGHMEM=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_AUTO_ZRELADDR=y CONFIG_KEXEC=y +CONFIG_AUTO_ZRELADDR=y CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_IDLE=y @@ -108,6 +106,7 @@ CONFIG_RT2X00=y CONFIG_RT2800USB=m CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_TEGRA=y +CONFIG_KEYBOARD_GPIO=y CONFIG_INPUT_MISC=y CONFIG_INPUT_MPU3050=y # CONFIG_LEGACY_PTYS is not set @@ -117,7 +116,6 @@ CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_TEGRA=y CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_HW_RANDOM is not set -CONFIG_I2C=y # CONFIG_I2C_COMPAT is not set CONFIG_I2C_MUX=y CONFIG_I2C_MUX_PINCTRL=y @@ -126,6 +124,7 @@ CONFIG_SPI=y CONFIG_SPI_TEGRA20_SFLASH=y CONFIG_SPI_TEGRA20_SLINK=y CONFIG_GPIO_PCA953X_IRQ=y +CONFIG_GPIO_PALMAS=y CONFIG_GPIO_TPS6586X=y CONFIG_GPIO_TPS65910=y CONFIG_POWER_SUPPLY=y @@ -136,12 +135,17 @@ CONFIG_SENSORS_LM90=y CONFIG_MFD_TPS6586X=y CONFIG_MFD_TPS65910=y CONFIG_MFD_MAX8907=y +CONFIG_MFD_TPS65090=y +CONFIG_MFD_PALMAS=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_VIRTUAL_CONSUMER=y CONFIG_REGULATOR_GPIO=y CONFIG_REGULATOR_MAX8907=y +CONFIG_REGULATOR_PALMAS=y +CONFIG_REGULATOR_TPS51632=y CONFIG_REGULATOR_TPS62360=y +CONFIG_REGULATOR_TPS65090=y CONFIG_REGULATOR_TPS6586X=y CONFIG_REGULATOR_TPS65910=y CONFIG_MEDIA_SUPPORT=y @@ -187,10 +191,8 @@ CONFIG_LEDS_GPIO=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_GPIO=y CONFIG_RTC_CLASS=y -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y CONFIG_RTC_DRV_MAX8907=y +CONFIG_RTC_DRV_PALMAS=y CONFIG_RTC_DRV_TPS6586X=y CONFIG_RTC_DRV_TPS65910=y CONFIG_RTC_DRV_EM3027=y diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index 426270fe080d..c037aa1065b7 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -5,7 +5,6 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_KALLSYMS_ALL=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -# CONFIG_LBDAF is not set # CONFIG_BLK_DEV_BSG is not set CONFIG_ARCH_U8500=y CONFIG_MACH_HREFV60=y @@ -90,6 +89,8 @@ CONFIG_LEDS_CLASS=y CONFIG_LEDS_LM3530=y CONFIG_LEDS_LP5521=y CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AB8500=y CONFIG_RTC_DRV_PL031=y @@ -103,6 +104,7 @@ CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y CONFIG_EXT3_FS=y +CONFIG_EXT4_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y diff --git a/arch/arm/include/asm/arch_timer.h b/arch/arm/include/asm/arch_timer.h index 7ade91d8cc6f..7c1bfc0aea0c 100644 --- a/arch/arm/include/asm/arch_timer.h +++ b/arch/arm/include/asm/arch_timer.h @@ -10,8 +10,7 @@ #include <clocksource/arm_arch_timer.h> #ifdef CONFIG_ARM_ARCH_TIMER -int arch_timer_of_register(void); -int arch_timer_sched_clock_init(void); +int arch_timer_arch_init(void); /* * These register accessors are marked inline so the compiler can @@ -110,16 +109,6 @@ static inline void __cpuinit arch_counter_set_user_access(void) asm volatile("mcr p15, 0, %0, c14, c1, 0" : : "r" (cntkctl)); } -#else -static inline int arch_timer_of_register(void) -{ - return -ENXIO; -} - -static inline int arch_timer_sched_clock_init(void) -{ - return -ENXIO; -} #endif #endif diff --git a/arch/arm/include/asm/atomic.h b/arch/arm/include/asm/atomic.h index c79f61faa3a5..da1c77d39327 100644 --- a/arch/arm/include/asm/atomic.h +++ b/arch/arm/include/asm/atomic.h @@ -243,6 +243,29 @@ typedef struct { #define ATOMIC64_INIT(i) { (i) } +#ifdef CONFIG_ARM_LPAE +static inline u64 atomic64_read(const atomic64_t *v) +{ + u64 result; + + __asm__ __volatile__("@ atomic64_read\n" +" ldrd %0, %H0, [%1]" + : "=&r" (result) + : "r" (&v->counter), "Qo" (v->counter) + ); + + return result; +} + +static inline void atomic64_set(atomic64_t *v, u64 i) +{ + __asm__ __volatile__("@ atomic64_set\n" +" strd %2, %H2, [%1]" + : "=Qo" (v->counter) + : "r" (&v->counter), "r" (i) + ); +} +#else static inline u64 atomic64_read(const atomic64_t *v) { u64 result; @@ -269,6 +292,7 @@ static inline void atomic64_set(atomic64_t *v, u64 i) : "r" (&v->counter), "r" (i) : "cc"); } +#endif static inline void atomic64_add(u64 i, atomic64_t *v) { diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h index e1489c54cd12..bff71388e72a 100644 --- a/arch/arm/include/asm/cacheflush.h +++ b/arch/arm/include/asm/cacheflush.h @@ -363,4 +363,79 @@ static inline void flush_cache_vunmap(unsigned long start, unsigned long end) flush_cache_all(); } +/* + * Memory synchronization helpers for mixed cached vs non cached accesses. + * + * Some synchronization algorithms have to set states in memory with the + * cache enabled or disabled depending on the code path. It is crucial + * to always ensure proper cache maintenance to update main memory right + * away in that case. + * + * Any cached write must be followed by a cache clean operation. + * Any cached read must be preceded by a cache invalidate operation. + * Yet, in the read case, a cache flush i.e. atomic clean+invalidate + * operation is needed to avoid discarding possible concurrent writes to the + * accessed memory. + * + * Also, in order to prevent a cached writer from interfering with an + * adjacent non-cached writer, each state variable must be located to + * a separate cache line. + */ + +/* + * This needs to be >= the max cache writeback size of all + * supported platforms included in the current kernel configuration. + * This is used to align state variables to their own cache lines. + */ +#define __CACHE_WRITEBACK_ORDER 6 /* guessed from existing platforms */ +#define __CACHE_WRITEBACK_GRANULE (1 << __CACHE_WRITEBACK_ORDER) + +/* + * There is no __cpuc_clean_dcache_area but we use it anyway for + * code intent clarity, and alias it to __cpuc_flush_dcache_area. + */ +#define __cpuc_clean_dcache_area __cpuc_flush_dcache_area + +/* + * Ensure preceding writes to *p by this CPU are visible to + * subsequent reads by other CPUs: + */ +static inline void __sync_cache_range_w(volatile void *p, size_t size) +{ + char *_p = (char *)p; + + __cpuc_clean_dcache_area(_p, size); + outer_clean_range(__pa(_p), __pa(_p + size)); +} + +/* + * Ensure preceding writes to *p by other CPUs are visible to + * subsequent reads by this CPU. We must be careful not to + * discard data simultaneously written by another CPU, hence the + * usage of flush rather than invalidate operations. + */ +static inline void __sync_cache_range_r(volatile void *p, size_t size) +{ + char *_p = (char *)p; + +#ifdef CONFIG_OUTER_CACHE + if (outer_cache.flush_range) { + /* + * Ensure dirty data migrated from other CPUs into our cache + * are cleaned out safely before the outer cache is cleaned: + */ + __cpuc_clean_dcache_area(_p, size); + + /* Clean and invalidate stale data for *p from outer ... */ + outer_flush_range(__pa(_p), __pa(_p + size)); + } +#endif + + /* ... and inner cache: */ + __cpuc_flush_dcache_area(_p, size); +} + +#define sync_cache_w(ptr) __sync_cache_range_w(ptr, sizeof *(ptr)) +#define sync_cache_r(ptr) __sync_cache_range_r(ptr, sizeof *(ptr)) + #endif diff --git a/arch/arm/include/asm/cp15.h b/arch/arm/include/asm/cp15.h index 5ef4d8015a60..1f3262e99d81 100644 --- a/arch/arm/include/asm/cp15.h +++ b/arch/arm/include/asm/cp15.h @@ -42,6 +42,8 @@ #define vectors_high() (0) #endif +#ifdef CONFIG_CPU_CP15 + extern unsigned long cr_no_alignment; /* defined in entry-armv.S */ extern unsigned long cr_alignment; /* defined in entry-armv.S */ @@ -82,6 +84,18 @@ static inline void set_copro_access(unsigned int val) isb(); } -#endif +#else /* ifdef CONFIG_CPU_CP15 */ + +/* + * cr_alignment and cr_no_alignment are tightly coupled to cp15 (at least in the + * minds of the developers). Yielding 0 for machines without a cp15 (and making + * it read-only) is fine for most cases and saves quite some #ifdeffery. + */ +#define cr_no_alignment UL(0) +#define cr_alignment UL(0) + +#endif /* ifdef CONFIG_CPU_CP15 / else */ + +#endif /* ifndef __ASSEMBLY__ */ #endif diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h index ad41ec2471e8..7652712d1d14 100644 --- a/arch/arm/include/asm/cputype.h +++ b/arch/arm/include/asm/cputype.h @@ -38,6 +38,24 @@ #define MPIDR_AFFINITY_LEVEL(mpidr, level) \ ((mpidr >> (MPIDR_LEVEL_BITS * level)) & MPIDR_LEVEL_MASK) +#define ARM_CPU_IMP_ARM 0x41 +#define ARM_CPU_IMP_INTEL 0x69 + +#define ARM_CPU_PART_ARM1136 0xB360 +#define ARM_CPU_PART_ARM1156 0xB560 +#define ARM_CPU_PART_ARM1176 0xB760 +#define ARM_CPU_PART_ARM11MPCORE 0xB020 +#define ARM_CPU_PART_CORTEX_A8 0xC080 +#define ARM_CPU_PART_CORTEX_A9 0xC090 +#define ARM_CPU_PART_CORTEX_A5 0xC050 +#define ARM_CPU_PART_CORTEX_A15 0xC0F0 +#define ARM_CPU_PART_CORTEX_A7 0xC070 + +#define ARM_CPU_XSCALE_ARCH_MASK 0xe000 +#define ARM_CPU_XSCALE_ARCH_V1 0x2000 +#define ARM_CPU_XSCALE_ARCH_V2 0x4000 +#define ARM_CPU_XSCALE_ARCH_V3 0x6000 + extern unsigned int processor_id; #ifdef CONFIG_CPU_CP15 @@ -50,6 +68,7 @@ extern unsigned int processor_id; : "cc"); \ __val; \ }) + #define read_cpuid_ext(ext_reg) \ ({ \ unsigned int __val; \ @@ -59,29 +78,24 @@ extern unsigned int processor_id; : "cc"); \ __val; \ }) -#else -#define read_cpuid(reg) (processor_id) -#define read_cpuid_ext(reg) 0 -#endif -#define ARM_CPU_IMP_ARM 0x41 -#define ARM_CPU_IMP_INTEL 0x69 +#else /* ifdef CONFIG_CPU_CP15 */ -#define ARM_CPU_PART_ARM1136 0xB360 -#define ARM_CPU_PART_ARM1156 0xB560 -#define ARM_CPU_PART_ARM1176 0xB760 -#define ARM_CPU_PART_ARM11MPCORE 0xB020 -#define ARM_CPU_PART_CORTEX_A8 0xC080 -#define ARM_CPU_PART_CORTEX_A9 0xC090 -#define ARM_CPU_PART_CORTEX_A5 0xC050 -#define ARM_CPU_PART_CORTEX_A15 0xC0F0 -#define ARM_CPU_PART_CORTEX_A7 0xC070 +/* + * read_cpuid and read_cpuid_ext should only ever be called on machines that + * have cp15 so warn on other usages. + */ +#define read_cpuid(reg) \ + ({ \ + WARN_ON_ONCE(1); \ + 0; \ + }) -#define ARM_CPU_XSCALE_ARCH_MASK 0xe000 -#define ARM_CPU_XSCALE_ARCH_V1 0x2000 -#define ARM_CPU_XSCALE_ARCH_V2 0x4000 -#define ARM_CPU_XSCALE_ARCH_V3 0x6000 +#define read_cpuid_ext(reg) read_cpuid(reg) + +#endif /* ifdef CONFIG_CPU_CP15 / else */ +#ifdef CONFIG_CPU_CP15 /* * The CPU ID never changes at run time, so we might as well tell the * compiler that it's constant. Use this function to read the CPU ID @@ -92,6 +106,15 @@ static inline unsigned int __attribute_const__ read_cpuid_id(void) return read_cpuid(CPUID_ID); } +#else /* ifdef CONFIG_CPU_CP15 */ + +static inline unsigned int __attribute_const__ read_cpuid_id(void) +{ + return processor_id; +} + +#endif /* ifdef CONFIG_CPU_CP15 / else */ + static inline unsigned int __attribute_const__ read_cpuid_implementor(void) { return (read_cpuid_id() & 0xFF000000) >> 24; diff --git a/arch/arm/include/asm/firmware.h b/arch/arm/include/asm/firmware.h new file mode 100644 index 000000000000..15631300c238 --- /dev/null +++ b/arch/arm/include/asm/firmware.h @@ -0,0 +1,66 @@ +/* + * Copyright (C) 2012 Samsung Electronics. + * Kyungmin Park <kyungmin.park@samsung.com> + * Tomasz Figa <t.figa@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARM_FIRMWARE_H +#define __ASM_ARM_FIRMWARE_H + +#include <linux/bug.h> + +/* + * struct firmware_ops + * + * A structure to specify available firmware operations. + * + * A filled up structure can be registered with register_firmware_ops(). + */ +struct firmware_ops { + /* + * Enters CPU idle mode + */ + int (*do_idle)(void); + /* + * Sets boot address of specified physical CPU + */ + int (*set_cpu_boot_addr)(int cpu, unsigned long boot_addr); + /* + * Boots specified physical CPU + */ + int (*cpu_boot)(int cpu); + /* + * Initializes L2 cache + */ + int (*l2x0_init)(void); +}; + +/* Global pointer for current firmware_ops structure, can't be NULL. */ +extern const struct firmware_ops *firmware_ops; + +/* + * call_firmware_op(op, ...) + * + * Checks if firmware operation is present and calls it, + * otherwise returns -ENOSYS + */ +#define call_firmware_op(op, ...) \ + ((firmware_ops->op) ? firmware_ops->op(__VA_ARGS__) : (-ENOSYS)) + +/* + * register_firmware_ops(ops) + * + * A function to register platform firmware_ops struct. + */ +static inline void register_firmware_ops(const struct firmware_ops *ops) +{ + BUG_ON(!ops); + + firmware_ops = ops; +} + +#endif diff --git a/arch/arm/include/asm/glue-cache.h b/arch/arm/include/asm/glue-cache.h index cca9f15704ed..ea289e1435e7 100644 --- a/arch/arm/include/asm/glue-cache.h +++ b/arch/arm/include/asm/glue-cache.h @@ -19,14 +19,6 @@ #undef _CACHE #undef MULTI_CACHE -#if defined(CONFIG_CPU_CACHE_V3) -# ifdef _CACHE -# define MULTI_CACHE 1 -# else -# define _CACHE v3 -# endif -#endif - #if defined(CONFIG_CPU_CACHE_V4) # ifdef _CACHE # define MULTI_CACHE 1 diff --git a/arch/arm/include/asm/glue-df.h b/arch/arm/include/asm/glue-df.h index 8cacbcda76da..b6e9f2c108b5 100644 --- a/arch/arm/include/asm/glue-df.h +++ b/arch/arm/include/asm/glue-df.h @@ -18,12 +18,12 @@ * ================ * * We have the following to choose from: - * arm6 - ARM6 style * arm7 - ARM7 style * v4_early - ARMv4 without Thumb early abort handler * v4t_late - ARMv4 with Thumb late abort handler * v4t_early - ARMv4 with Thumb early abort handler - * v5tej_early - ARMv5 with Thumb and Java early abort handler + * v5t_early - ARMv5 with Thumb early abort handler + * v5tj_early - ARMv5 with Thumb and Java early abort handler * xscale - ARMv5 with Thumb with Xscale extensions * v6_early - ARMv6 generic early abort handler * v7_early - ARMv7 generic early abort handler @@ -39,19 +39,19 @@ # endif #endif -#ifdef CONFIG_CPU_ABRT_LV4T +#ifdef CONFIG_CPU_ABRT_EV4 # ifdef CPU_DABORT_HANDLER # define MULTI_DABORT 1 # else -# define CPU_DABORT_HANDLER v4t_late_abort +# define CPU_DABORT_HANDLER v4_early_abort # endif #endif -#ifdef CONFIG_CPU_ABRT_EV4 +#ifdef CONFIG_CPU_ABRT_LV4T # ifdef CPU_DABORT_HANDLER # define MULTI_DABORT 1 # else -# define CPU_DABORT_HANDLER v4_early_abort +# define CPU_DABORT_HANDLER v4t_late_abort # endif #endif @@ -63,19 +63,19 @@ # endif #endif -#ifdef CONFIG_CPU_ABRT_EV5TJ +#ifdef CONFIG_CPU_ABRT_EV5T # ifdef CPU_DABORT_HANDLER # define MULTI_DABORT 1 # else -# define CPU_DABORT_HANDLER v5tj_early_abort +# define CPU_DABORT_HANDLER v5t_early_abort # endif #endif -#ifdef CONFIG_CPU_ABRT_EV5T +#ifdef CONFIG_CPU_ABRT_EV5TJ # ifdef CPU_DABORT_HANDLER # define MULTI_DABORT 1 # else -# define CPU_DABORT_HANDLER v5t_early_abort +# define CPU_DABORT_HANDLER v5tj_early_abort # endif #endif diff --git a/arch/arm/include/asm/hardware/iop3xx.h b/arch/arm/include/asm/hardware/iop3xx.h index 02fe2fbe2477..ed94b1a366ae 100644 --- a/arch/arm/include/asm/hardware/iop3xx.h +++ b/arch/arm/include/asm/hardware/iop3xx.h @@ -37,7 +37,7 @@ extern int iop3xx_get_init_atu(void); * IOP3XX processor registers */ #define IOP3XX_PERIPHERAL_PHYS_BASE 0xffffe000 -#define IOP3XX_PERIPHERAL_VIRT_BASE 0xfeffe000 +#define IOP3XX_PERIPHERAL_VIRT_BASE 0xfedfe000 #define IOP3XX_PERIPHERAL_SIZE 0x00002000 #define IOP3XX_PERIPHERAL_UPPER_PA (IOP3XX_PERIPHERAL_PHYS_BASE +\ IOP3XX_PERIPHERAL_SIZE - 1) diff --git a/arch/arm/include/asm/hardware/timer-sp.h b/arch/arm/include/asm/hardware/timer-sp.h index 2dd9d3f83f29..bb28af7c32de 100644 --- a/arch/arm/include/asm/hardware/timer-sp.h +++ b/arch/arm/include/asm/hardware/timer-sp.h @@ -1,15 +1,23 @@ +struct clk; + void __sp804_clocksource_and_sched_clock_init(void __iomem *, - const char *, int); + const char *, struct clk *, int); +void __sp804_clockevents_init(void __iomem *, unsigned int, + struct clk *, const char *); static inline void sp804_clocksource_init(void __iomem *base, const char *name) { - __sp804_clocksource_and_sched_clock_init(base, name, 0); + __sp804_clocksource_and_sched_clock_init(base, name, NULL, 0); } static inline void sp804_clocksource_and_sched_clock_init(void __iomem *base, const char *name) { - __sp804_clocksource_and_sched_clock_init(base, name, 1); + __sp804_clocksource_and_sched_clock_init(base, name, NULL, 1); } -void sp804_clockevents_init(void __iomem *, unsigned int, const char *); +static inline void sp804_clockevents_init(void __iomem *base, unsigned int irq, const char *name) +{ + __sp804_clockevents_init(base, irq, NULL, name); + +} diff --git a/arch/arm/include/asm/idmap.h b/arch/arm/include/asm/idmap.h index 1a66f907e5cc..bf863edb517d 100644 --- a/arch/arm/include/asm/idmap.h +++ b/arch/arm/include/asm/idmap.h @@ -8,7 +8,6 @@ #define __idmap __section(.idmap.text) noinline notrace extern pgd_t *idmap_pgd; -extern pgd_t *hyp_pgd; void setup_mm_for_reboot(void); diff --git a/arch/arm/include/asm/irq.h b/arch/arm/include/asm/irq.h index 35c21c375d81..53c15dec7af6 100644 --- a/arch/arm/include/asm/irq.h +++ b/arch/arm/include/asm/irq.h @@ -30,6 +30,11 @@ extern void asm_do_IRQ(unsigned int, struct pt_regs *); void handle_IRQ(unsigned int, struct pt_regs *); void init_IRQ(void); +#ifdef CONFIG_MULTI_IRQ_HANDLER +extern void (*handle_arch_irq)(struct pt_regs *); +extern void set_handle_irq(void (*handle_irq)(struct pt_regs *)); +#endif + #endif #endif diff --git a/arch/arm/include/asm/kvm_arm.h b/arch/arm/include/asm/kvm_arm.h index 7c3d813e15df..124623e5ef14 100644 --- a/arch/arm/include/asm/kvm_arm.h +++ b/arch/arm/include/asm/kvm_arm.h @@ -211,4 +211,8 @@ #define HSR_HVC_IMM_MASK ((1UL << 16) - 1) +#define HSR_DABT_S1PTW (1U << 7) +#define HSR_DABT_CM (1U << 8) +#define HSR_DABT_EA (1U << 9) + #endif /* __ARM_KVM_ARM_H__ */ diff --git a/arch/arm/include/asm/kvm_asm.h b/arch/arm/include/asm/kvm_asm.h index e4956f4e23e1..18d50322a9e2 100644 --- a/arch/arm/include/asm/kvm_asm.h +++ b/arch/arm/include/asm/kvm_asm.h @@ -75,7 +75,7 @@ extern char __kvm_hyp_code_end[]; extern void __kvm_tlb_flush_vmid(struct kvm *kvm); extern void __kvm_flush_vm_context(void); -extern void __kvm_tlb_flush_vmid(struct kvm *kvm); +extern void __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa); extern int __kvm_vcpu_run(struct kvm_vcpu *vcpu); #endif diff --git a/arch/arm/include/asm/kvm_emulate.h b/arch/arm/include/asm/kvm_emulate.h index fd611996bfb5..82b4babead2c 100644 --- a/arch/arm/include/asm/kvm_emulate.h +++ b/arch/arm/include/asm/kvm_emulate.h @@ -22,11 +22,12 @@ #include <linux/kvm_host.h> #include <asm/kvm_asm.h> #include <asm/kvm_mmio.h> +#include <asm/kvm_arm.h> -u32 *vcpu_reg(struct kvm_vcpu *vcpu, u8 reg_num); -u32 *vcpu_spsr(struct kvm_vcpu *vcpu); +unsigned long *vcpu_reg(struct kvm_vcpu *vcpu, u8 reg_num); +unsigned long *vcpu_spsr(struct kvm_vcpu *vcpu); -int kvm_handle_wfi(struct kvm_vcpu *vcpu, struct kvm_run *run); +bool kvm_condition_valid(struct kvm_vcpu *vcpu); void kvm_skip_instr(struct kvm_vcpu *vcpu, bool is_wide_instr); void kvm_inject_undefined(struct kvm_vcpu *vcpu); void kvm_inject_dabt(struct kvm_vcpu *vcpu, unsigned long addr); @@ -37,14 +38,14 @@ static inline bool vcpu_mode_is_32bit(struct kvm_vcpu *vcpu) return 1; } -static inline u32 *vcpu_pc(struct kvm_vcpu *vcpu) +static inline unsigned long *vcpu_pc(struct kvm_vcpu *vcpu) { - return (u32 *)&vcpu->arch.regs.usr_regs.ARM_pc; + return &vcpu->arch.regs.usr_regs.ARM_pc; } -static inline u32 *vcpu_cpsr(struct kvm_vcpu *vcpu) +static inline unsigned long *vcpu_cpsr(struct kvm_vcpu *vcpu) { - return (u32 *)&vcpu->arch.regs.usr_regs.ARM_cpsr; + return &vcpu->arch.regs.usr_regs.ARM_cpsr; } static inline void vcpu_set_thumb(struct kvm_vcpu *vcpu) @@ -69,4 +70,96 @@ static inline bool kvm_vcpu_reg_is_pc(struct kvm_vcpu *vcpu, int reg) return reg == 15; } +static inline u32 kvm_vcpu_get_hsr(struct kvm_vcpu *vcpu) +{ + return vcpu->arch.fault.hsr; +} + +static inline unsigned long kvm_vcpu_get_hfar(struct kvm_vcpu *vcpu) +{ + return vcpu->arch.fault.hxfar; +} + +static inline phys_addr_t kvm_vcpu_get_fault_ipa(struct kvm_vcpu *vcpu) +{ + return ((phys_addr_t)vcpu->arch.fault.hpfar & HPFAR_MASK) << 8; +} + +static inline unsigned long kvm_vcpu_get_hyp_pc(struct kvm_vcpu *vcpu) +{ + return vcpu->arch.fault.hyp_pc; +} + +static inline bool kvm_vcpu_dabt_isvalid(struct kvm_vcpu *vcpu) +{ + return kvm_vcpu_get_hsr(vcpu) & HSR_ISV; +} + +static inline bool kvm_vcpu_dabt_iswrite(struct kvm_vcpu *vcpu) +{ + return kvm_vcpu_get_hsr(vcpu) & HSR_WNR; +} + +static inline bool kvm_vcpu_dabt_issext(struct kvm_vcpu *vcpu) +{ + return kvm_vcpu_get_hsr(vcpu) & HSR_SSE; +} + +static inline int kvm_vcpu_dabt_get_rd(struct kvm_vcpu *vcpu) +{ + return (kvm_vcpu_get_hsr(vcpu) & HSR_SRT_MASK) >> HSR_SRT_SHIFT; +} + +static inline bool kvm_vcpu_dabt_isextabt(struct kvm_vcpu *vcpu) +{ + return kvm_vcpu_get_hsr(vcpu) & HSR_DABT_EA; +} + +static inline bool kvm_vcpu_dabt_iss1tw(struct kvm_vcpu *vcpu) +{ + return kvm_vcpu_get_hsr(vcpu) & HSR_DABT_S1PTW; +} + +/* Get Access Size from a data abort */ +static inline int kvm_vcpu_dabt_get_as(struct kvm_vcpu *vcpu) +{ + switch ((kvm_vcpu_get_hsr(vcpu) >> 22) & 0x3) { + case 0: + return 1; + case 1: + return 2; + case 2: + return 4; + default: + kvm_err("Hardware is weird: SAS 0b11 is reserved\n"); + return -EFAULT; + } +} + +/* This one is not specific to Data Abort */ +static inline bool kvm_vcpu_trap_il_is32bit(struct kvm_vcpu *vcpu) +{ + return kvm_vcpu_get_hsr(vcpu) & HSR_IL; +} + +static inline u8 kvm_vcpu_trap_get_class(struct kvm_vcpu *vcpu) +{ + return kvm_vcpu_get_hsr(vcpu) >> HSR_EC_SHIFT; +} + +static inline bool kvm_vcpu_trap_is_iabt(struct kvm_vcpu *vcpu) +{ + return kvm_vcpu_trap_get_class(vcpu) == HSR_EC_IABT; +} + +static inline u8 kvm_vcpu_trap_get_fault(struct kvm_vcpu *vcpu) +{ + return kvm_vcpu_get_hsr(vcpu) & HSR_FSC_TYPE; +} + +static inline u32 kvm_vcpu_hvc_get_imm(struct kvm_vcpu *vcpu) +{ + return kvm_vcpu_get_hsr(vcpu) & HSR_HVC_IMM_MASK; +} + #endif /* __ARM_KVM_EMULATE_H__ */ diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h index d1736a53b12d..57cb786a6203 100644 --- a/arch/arm/include/asm/kvm_host.h +++ b/arch/arm/include/asm/kvm_host.h @@ -80,6 +80,15 @@ struct kvm_mmu_memory_cache { void *objects[KVM_NR_MEM_OBJS]; }; +struct kvm_vcpu_fault_info { + u32 hsr; /* Hyp Syndrome Register */ + u32 hxfar; /* Hyp Data/Inst. Fault Address Register */ + u32 hpfar; /* Hyp IPA Fault Address Register */ + u32 hyp_pc; /* PC when exception was taken from Hyp mode */ +}; + +typedef struct vfp_hard_struct kvm_cpu_context_t; + struct kvm_vcpu_arch { struct kvm_regs regs; @@ -93,13 +102,13 @@ struct kvm_vcpu_arch { u32 midr; /* Exception Information */ - u32 hsr; /* Hyp Syndrome Register */ - u32 hxfar; /* Hyp Data/Inst Fault Address Register */ - u32 hpfar; /* Hyp IPA Fault Address Register */ + struct kvm_vcpu_fault_info fault; /* Floating point registers (VFP and Advanced SIMD/NEON) */ struct vfp_hard_struct vfp_guest; - struct vfp_hard_struct *vfp_host; + + /* Host FP context */ + kvm_cpu_context_t *host_cpu_context; /* VGIC state */ struct vgic_cpu vgic_cpu; @@ -122,9 +131,6 @@ struct kvm_vcpu_arch { /* Interrupt related fields */ u32 irq_lines; /* IRQ and FIQ levels */ - /* Hyp exception information */ - u32 hyp_pc; /* PC when exception was taken from Hyp mode */ - /* Cache some mmu pages needed inside spinlock regions */ struct kvm_mmu_memory_cache mmu_page_cache; @@ -181,4 +187,41 @@ struct kvm_one_reg; int kvm_arm_coproc_get_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *); int kvm_arm_coproc_set_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *); +int handle_exit(struct kvm_vcpu *vcpu, struct kvm_run *run, + int exception_index); + +static inline void __cpu_init_hyp_mode(unsigned long long boot_pgd_ptr, + unsigned long long pgd_ptr, + unsigned long hyp_stack_ptr, + unsigned long vector_ptr) +{ + /* + * Call initialization code, and switch to the full blown HYP + * code. The init code doesn't need to preserve these + * registers as r0-r3 are already callee saved according to + * the AAPCS. + * Note that we slightly misuse the prototype by casing the + * stack pointer to a void *. + * + * We don't have enough registers to perform the full init in + * one go. Install the boot PGD first, and then install the + * runtime PGD, stack pointer and vectors. The PGDs are always + * passed as the third argument, in order to be passed into + * r2-r3 to the init code (yes, this is compliant with the + * PCS!). + */ + + kvm_call_hyp(NULL, 0, boot_pgd_ptr); + + kvm_call_hyp((void*)hyp_stack_ptr, vector_ptr, pgd_ptr); +} + +static inline int kvm_arch_dev_ioctl_check_extension(long ext) +{ + return 0; +} + +int kvm_perf_init(void); +int kvm_perf_teardown(void); + #endif /* __ARM_KVM_HOST_H__ */ diff --git a/arch/arm/include/asm/kvm_mmu.h b/arch/arm/include/asm/kvm_mmu.h index 421a20b34874..472ac7091003 100644 --- a/arch/arm/include/asm/kvm_mmu.h +++ b/arch/arm/include/asm/kvm_mmu.h @@ -19,9 +19,33 @@ #ifndef __ARM_KVM_MMU_H__ #define __ARM_KVM_MMU_H__ +#include <asm/memory.h> +#include <asm/page.h> + +/* + * We directly use the kernel VA for the HYP, as we can directly share + * the mapping (HTTBR "covers" TTBR1). + */ +#define HYP_PAGE_OFFSET_MASK UL(~0) +#define HYP_PAGE_OFFSET PAGE_OFFSET +#define KERN_TO_HYP(kva) (kva) + +/* + * Our virtual mapping for the boot-time MMU-enable code. Must be + * shared across all the page-tables. Conveniently, we use the vectors + * page, where no kernel data will ever be shared with HYP. + */ +#define TRAMPOLINE_VA UL(CONFIG_VECTORS_BASE) + +#ifndef __ASSEMBLY__ + +#include <asm/cacheflush.h> +#include <asm/pgalloc.h> + int create_hyp_mappings(void *from, void *to); int create_hyp_io_mappings(void *from, void *to, phys_addr_t); -void free_hyp_pmds(void); +void free_boot_hyp_pgd(void); +void free_hyp_pgds(void); int kvm_alloc_stage2_pgd(struct kvm *kvm); void kvm_free_stage2_pgd(struct kvm *kvm); @@ -33,9 +57,21 @@ int kvm_handle_guest_abort(struct kvm_vcpu *vcpu, struct kvm_run *run); void kvm_mmu_free_memory_caches(struct kvm_vcpu *vcpu); phys_addr_t kvm_mmu_get_httbr(void); +phys_addr_t kvm_mmu_get_boot_httbr(void); +phys_addr_t kvm_get_idmap_vector(void); int kvm_mmu_init(void); void kvm_clear_hyp_idmap(void); +static inline void kvm_set_pte(pte_t *pte, pte_t new_pte) +{ + pte_val(*pte) = new_pte; + /* + * flush_pmd_entry just takes a void pointer and cleans the necessary + * cache entries, so we can reuse the function for ptes. + */ + flush_pmd_entry(pte); +} + static inline bool kvm_is_write_fault(unsigned long hsr) { unsigned long hsr_ec = hsr >> HSR_EC_SHIFT; @@ -47,4 +83,53 @@ static inline bool kvm_is_write_fault(unsigned long hsr) return true; } +static inline void kvm_clean_pgd(pgd_t *pgd) +{ + clean_dcache_area(pgd, PTRS_PER_S2_PGD * sizeof(pgd_t)); +} + +static inline void kvm_clean_pmd_entry(pmd_t *pmd) +{ + clean_pmd_entry(pmd); +} + +static inline void kvm_clean_pte(pte_t *pte) +{ + clean_pte_table(pte); +} + +static inline void kvm_set_s2pte_writable(pte_t *pte) +{ + pte_val(*pte) |= L_PTE_S2_RDWR; +} + +struct kvm; + +static inline void coherent_icache_guest_page(struct kvm *kvm, gfn_t gfn) +{ + /* + * If we are going to insert an instruction page and the icache is + * either VIPT or PIPT, there is a potential problem where the host + * (or another VM) may have used the same page as this guest, and we + * read incorrect data from the icache. If we're using a PIPT cache, + * we can invalidate just that page, but if we are using a VIPT cache + * we need to invalidate the entire icache - damn shame - as written + * in the ARM ARM (DDI 0406C.b - Page B3-1393). + * + * VIVT caches are tagged using both the ASID and the VMID and doesn't + * need any kind of flushing (DDI 0406C.b - Page B3-1392). + */ + if (icache_is_pipt()) { + unsigned long hva = gfn_to_hva(kvm, gfn); + __cpuc_coherent_user_range(hva, hva + PAGE_SIZE); + } else if (!icache_is_vivt_asid_tagged()) { + /* any kind of VIPT cache */ + __flush_icache_all(); + } +} + +#define kvm_flush_dcache_to_poc(a,l) __cpuc_flush_dcache_area((a), (l)) + +#endif /* !__ASSEMBLY__ */ + #endif /* __ARM_KVM_MMU_H__ */ diff --git a/arch/arm/include/asm/kvm_vgic.h b/arch/arm/include/asm/kvm_vgic.h index ab97207d9cd3..343744e4809c 100644 --- a/arch/arm/include/asm/kvm_vgic.h +++ b/arch/arm/include/asm/kvm_vgic.h @@ -21,7 +21,6 @@ #include <linux/kernel.h> #include <linux/kvm.h> -#include <linux/kvm_host.h> #include <linux/irqreturn.h> #include <linux/spinlock.h> #include <linux/types.h> diff --git a/arch/arm/include/asm/mach/irq.h b/arch/arm/include/asm/mach/irq.h index 18c883023339..2092ee1e1300 100644 --- a/arch/arm/include/asm/mach/irq.h +++ b/arch/arm/include/asm/mach/irq.h @@ -20,11 +20,6 @@ struct seq_file; extern void init_FIQ(int); extern int show_fiq_list(struct seq_file *, int); -#ifdef CONFIG_MULTI_IRQ_HANDLER -extern void (*handle_arch_irq)(struct pt_regs *); -extern void set_handle_irq(void (*handle_irq)(struct pt_regs *)); -#endif - /* * This is for easy migration, but should be changed in the source */ @@ -35,35 +30,4 @@ do { \ raw_spin_unlock(&desc->lock); \ } while(0) -#ifndef __ASSEMBLY__ -/* - * Entry/exit functions for chained handlers where the primary IRQ chip - * may implement either fasteoi or level-trigger flow control. - */ -static inline void chained_irq_enter(struct irq_chip *chip, - struct irq_desc *desc) -{ - /* FastEOI controllers require no action on entry. */ - if (chip->irq_eoi) - return; - - if (chip->irq_mask_ack) { - chip->irq_mask_ack(&desc->irq_data); - } else { - chip->irq_mask(&desc->irq_data); - if (chip->irq_ack) - chip->irq_ack(&desc->irq_data); - } -} - -static inline void chained_irq_exit(struct irq_chip *chip, - struct irq_desc *desc) -{ - if (chip->irq_eoi) - chip->irq_eoi(&desc->irq_data); - else - chip->irq_unmask(&desc->irq_data); -} -#endif - #endif diff --git a/arch/arm/include/asm/mach/pci.h b/arch/arm/include/asm/mach/pci.h index 5cf2e979b4be..7d2c3c843801 100644 --- a/arch/arm/include/asm/mach/pci.h +++ b/arch/arm/include/asm/mach/pci.h @@ -30,6 +30,11 @@ struct hw_pci { void (*postinit)(void); u8 (*swizzle)(struct pci_dev *dev, u8 *pin); int (*map_irq)(const struct pci_dev *dev, u8 slot, u8 pin); + resource_size_t (*align_resource)(struct pci_dev *dev, + const struct resource *res, + resource_size_t start, + resource_size_t size, + resource_size_t align); }; /* @@ -51,6 +56,12 @@ struct pci_sys_data { u8 (*swizzle)(struct pci_dev *, u8 *); /* IRQ mapping */ int (*map_irq)(const struct pci_dev *, u8, u8); + /* Resource alignement requirements */ + resource_size_t (*align_resource)(struct pci_dev *dev, + const struct resource *res, + resource_size_t start, + resource_size_t size, + resource_size_t align); void *private_data; /* platform controller private data */ }; diff --git a/arch/arm/include/asm/mcpm.h b/arch/arm/include/asm/mcpm.h new file mode 100644 index 000000000000..0f7b7620e9a5 --- /dev/null +++ b/arch/arm/include/asm/mcpm.h @@ -0,0 +1,209 @@ +/* + * arch/arm/include/asm/mcpm.h + * + * Created by: Nicolas Pitre, April 2012 + * Copyright: (C) 2012-2013 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef MCPM_H +#define MCPM_H + +/* + * Maximum number of possible clusters / CPUs per cluster. + * + * This should be sufficient for quite a while, while keeping the + * (assembly) code simpler. When this starts to grow then we'll have + * to consider dynamic allocation. + */ +#define MAX_CPUS_PER_CLUSTER 4 +#define MAX_NR_CLUSTERS 2 + +#ifndef __ASSEMBLY__ + +#include <linux/types.h> +#include <asm/cacheflush.h> + +/* + * Platform specific code should use this symbol to set up secondary + * entry location for processors to use when released from reset. + */ +extern void mcpm_entry_point(void); + +/* + * This is used to indicate where the given CPU from given cluster should + * branch once it is ready to re-enter the kernel using ptr, or NULL if it + * should be gated. A gated CPU is held in a WFE loop until its vector + * becomes non NULL. + */ +void mcpm_set_entry_vector(unsigned cpu, unsigned cluster, void *ptr); + +/* + * CPU/cluster power operations API for higher subsystems to use. + */ + +/** + * mcpm_cpu_power_up - make given CPU in given cluster runable + * + * @cpu: CPU number within given cluster + * @cluster: cluster number for the CPU + * + * The identified CPU is brought out of reset. If the cluster was powered + * down then it is brought up as well, taking care not to let the other CPUs + * in the cluster run, and ensuring appropriate cluster setup. + * + * Caller must ensure the appropriate entry vector is initialized with + * mcpm_set_entry_vector() prior to calling this. + * + * This must be called in a sleepable context. However, the implementation + * is strongly encouraged to return early and let the operation happen + * asynchronously, especially when significant delays are expected. + * + * If the operation cannot be performed then an error code is returned. + */ +int mcpm_cpu_power_up(unsigned int cpu, unsigned int cluster); + +/** + * mcpm_cpu_power_down - power the calling CPU down + * + * The calling CPU is powered down. + * + * If this CPU is found to be the "last man standing" in the cluster + * then the cluster is prepared for power-down too. + * + * This must be called with interrupts disabled. + * + * This does not return. Re-entry in the kernel is expected via + * mcpm_entry_point. + */ +void mcpm_cpu_power_down(void); + +/** + * mcpm_cpu_suspend - bring the calling CPU in a suspended state + * + * @expected_residency: duration in microseconds the CPU is expected + * to remain suspended, or 0 if unknown/infinity. + * + * The calling CPU is suspended. The expected residency argument is used + * as a hint by the platform specific backend to implement the appropriate + * sleep state level according to the knowledge it has on wake-up latency + * for the given hardware. + * + * If this CPU is found to be the "last man standing" in the cluster + * then the cluster may be prepared for power-down too, if the expected + * residency makes it worthwhile. + * + * This must be called with interrupts disabled. + * + * This does not return. Re-entry in the kernel is expected via + * mcpm_entry_point. + */ +void mcpm_cpu_suspend(u64 expected_residency); + +/** + * mcpm_cpu_powered_up - housekeeping workafter a CPU has been powered up + * + * This lets the platform specific backend code perform needed housekeeping + * work. This must be called by the newly activated CPU as soon as it is + * fully operational in kernel space, before it enables interrupts. + * + * If the operation cannot be performed then an error code is returned. + */ +int mcpm_cpu_powered_up(void); + +/* + * Platform specific methods used in the implementation of the above API. + */ +struct mcpm_platform_ops { + int (*power_up)(unsigned int cpu, unsigned int cluster); + void (*power_down)(void); + void (*suspend)(u64); + void (*powered_up)(void); +}; + +/** + * mcpm_platform_register - register platform specific power methods + * + * @ops: mcpm_platform_ops structure to register + * + * An error is returned if the registration has been done previously. + */ +int __init mcpm_platform_register(const struct mcpm_platform_ops *ops); + +/* Synchronisation structures for coordinating safe cluster setup/teardown: */ + +/* + * When modifying this structure, make sure you update the MCPM_SYNC_ defines + * to match. + */ +struct mcpm_sync_struct { + /* individual CPU states */ + struct { + s8 cpu __aligned(__CACHE_WRITEBACK_GRANULE); + } cpus[MAX_CPUS_PER_CLUSTER]; + + /* cluster state */ + s8 cluster __aligned(__CACHE_WRITEBACK_GRANULE); + + /* inbound-side state */ + s8 inbound __aligned(__CACHE_WRITEBACK_GRANULE); +}; + +struct sync_struct { + struct mcpm_sync_struct clusters[MAX_NR_CLUSTERS]; +}; + +extern unsigned long sync_phys; /* physical address of *mcpm_sync */ + +void __mcpm_cpu_going_down(unsigned int cpu, unsigned int cluster); +void __mcpm_cpu_down(unsigned int cpu, unsigned int cluster); +void __mcpm_outbound_leave_critical(unsigned int cluster, int state); +bool __mcpm_outbound_enter_critical(unsigned int this_cpu, unsigned int cluster); +int __mcpm_cluster_state(unsigned int cluster); + +int __init mcpm_sync_init( + void (*power_up_setup)(unsigned int affinity_level)); + +void __init mcpm_smp_set_ops(void); + +#else + +/* + * asm-offsets.h causes trouble when included in .c files, and cacheflush.h + * cannot be included in asm files. Let's work around the conflict like this. + */ +#include <asm/asm-offsets.h> +#define __CACHE_WRITEBACK_GRANULE CACHE_WRITEBACK_GRANULE + +#endif /* ! __ASSEMBLY__ */ + +/* Definitions for mcpm_sync_struct */ +#define CPU_DOWN 0x11 +#define CPU_COMING_UP 0x12 +#define CPU_UP 0x13 +#define CPU_GOING_DOWN 0x14 + +#define CLUSTER_DOWN 0x21 +#define CLUSTER_UP 0x22 +#define CLUSTER_GOING_DOWN 0x23 + +#define INBOUND_NOT_COMING_UP 0x31 +#define INBOUND_COMING_UP 0x32 + +/* + * Offsets for the mcpm_sync_struct members, for use in asm. + * We don't want to make them global to the kernel via asm-offsets.c. + */ +#define MCPM_SYNC_CLUSTER_CPUS 0 +#define MCPM_SYNC_CPU_SIZE __CACHE_WRITEBACK_GRANULE +#define MCPM_SYNC_CLUSTER_CLUSTER \ + (MCPM_SYNC_CLUSTER_CPUS + MCPM_SYNC_CPU_SIZE * MAX_CPUS_PER_CLUSTER) +#define MCPM_SYNC_CLUSTER_INBOUND \ + (MCPM_SYNC_CLUSTER_CLUSTER + __CACHE_WRITEBACK_GRANULE) +#define MCPM_SYNC_CLUSTER_SIZE \ + (MCPM_SYNC_CLUSTER_INBOUND + __CACHE_WRITEBACK_GRANULE) + +#endif diff --git a/arch/arm/include/asm/pgtable-3level.h b/arch/arm/include/asm/pgtable-3level.h index 6ef8afd1b64c..86b8fe398b95 100644 --- a/arch/arm/include/asm/pgtable-3level.h +++ b/arch/arm/include/asm/pgtable-3level.h @@ -111,7 +111,7 @@ #define L_PTE_S2_MT_WRITETHROUGH (_AT(pteval_t, 0xa) << 2) /* MemAttr[3:0] */ #define L_PTE_S2_MT_WRITEBACK (_AT(pteval_t, 0xf) << 2) /* MemAttr[3:0] */ #define L_PTE_S2_RDONLY (_AT(pteval_t, 1) << 6) /* HAP[1] */ -#define L_PTE_S2_RDWR (_AT(pteval_t, 2) << 6) /* HAP[2:1] */ +#define L_PTE_S2_RDWR (_AT(pteval_t, 3) << 6) /* HAP[2:1] */ /* * Hyp-mode PL2 PTE definitions for LPAE. diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index 80d6fc4dbe4a..9bcd262a9008 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -61,6 +61,15 @@ extern void __pgd_error(const char *file, int line, pgd_t); #define FIRST_USER_ADDRESS PAGE_SIZE /* + * Use TASK_SIZE as the ceiling argument for free_pgtables() and + * free_pgd_range() to avoid freeing the modules pmd when LPAE is enabled (pmd + * page shared between user and kernel). + */ +#ifdef CONFIG_ARM_LPAE +#define USER_PGTABLES_CEILING TASK_SIZE +#endif + +/* * The pgprot_* and protection_map entries will be fixed up in runtime * to include the cachable and bufferable bits based on memory policy, * as well as any architecture dependent bits like global/ASID and SMP diff --git a/arch/arm/include/asm/sched_clock.h b/arch/arm/include/asm/sched_clock.h index e3f757263438..3d520ddca61b 100644 --- a/arch/arm/include/asm/sched_clock.h +++ b/arch/arm/include/asm/sched_clock.h @@ -11,4 +11,6 @@ extern void sched_clock_postinit(void); extern void setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate); +extern unsigned long long (*sched_clock_func)(void); + #endif diff --git a/arch/arm/include/asm/smp_twd.h b/arch/arm/include/asm/smp_twd.h index 0f01f4677bd2..7b2899c2f7fc 100644 --- a/arch/arm/include/asm/smp_twd.h +++ b/arch/arm/include/asm/smp_twd.h @@ -34,12 +34,4 @@ struct twd_local_timer name __initdata = { \ int twd_local_timer_register(struct twd_local_timer *); -#ifdef CONFIG_HAVE_ARM_TWD -void twd_local_timer_of_register(void); -#else -static inline void twd_local_timer_of_register(void) -{ -} -#endif - #endif diff --git a/arch/arm/include/asm/system_misc.h b/arch/arm/include/asm/system_misc.h index 5a85f148b607..21a23e378bbe 100644 --- a/arch/arm/include/asm/system_misc.h +++ b/arch/arm/include/asm/system_misc.h @@ -21,9 +21,6 @@ extern void (*arm_pm_idle)(void); extern unsigned int user_debug; -extern void disable_hlt(void); -extern void enable_hlt(void); - #endif /* !__ASSEMBLY__ */ #endif /* __ASM_ARM_SYSTEM_MISC_H */ diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h index cddda1f41f0f..1995d1a84060 100644 --- a/arch/arm/include/asm/thread_info.h +++ b/arch/arm/include/asm/thread_info.h @@ -152,6 +152,7 @@ extern int vfp_restore_user_hwstate(struct user_vfp __user *, #define TIF_SYSCALL_AUDIT 9 #define TIF_SYSCALL_TRACEPOINT 10 #define TIF_SECCOMP 11 /* seccomp syscall filtering active */ +#define TIF_NOHZ 12 /* in adaptive nohz mode */ #define TIF_USING_IWMMXT 17 #define TIF_MEMDIE 18 /* is terminating due to OOM killer */ #define TIF_RESTORE_SIGMASK 20 diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h index 9e9c041358ca..a3625d141c1d 100644 --- a/arch/arm/include/asm/tlbflush.h +++ b/arch/arm/include/asm/tlbflush.h @@ -14,7 +14,6 @@ #include <asm/glue.h> -#define TLB_V3_PAGE (1 << 0) #define TLB_V4_U_PAGE (1 << 1) #define TLB_V4_D_PAGE (1 << 2) #define TLB_V4_I_PAGE (1 << 3) @@ -22,7 +21,6 @@ #define TLB_V6_D_PAGE (1 << 5) #define TLB_V6_I_PAGE (1 << 6) -#define TLB_V3_FULL (1 << 8) #define TLB_V4_U_FULL (1 << 9) #define TLB_V4_D_FULL (1 << 10) #define TLB_V4_I_FULL (1 << 11) @@ -52,7 +50,6 @@ * ============= * * We have the following to choose from: - * v3 - ARMv3 * v4 - ARMv4 without write buffer * v4wb - ARMv4 with write buffer without I TLB flush entry instruction * v4wbi - ARMv4 with write buffer with I TLB flush entry instruction @@ -169,7 +166,7 @@ # define v6wbi_always_flags (-1UL) #endif -#define v7wbi_tlb_flags_smp (TLB_WB | TLB_DCLEAN | TLB_BARRIER | \ +#define v7wbi_tlb_flags_smp (TLB_WB | TLB_BARRIER | \ TLB_V7_UIS_FULL | TLB_V7_UIS_PAGE | \ TLB_V7_UIS_ASID | TLB_V7_UIS_BP) #define v7wbi_tlb_flags_up (TLB_WB | TLB_DCLEAN | TLB_BARRIER | \ @@ -330,7 +327,6 @@ static inline void local_flush_tlb_all(void) if (tlb_flag(TLB_WB)) dsb(); - tlb_op(TLB_V3_FULL, "c6, c0, 0", zero); tlb_op(TLB_V4_U_FULL | TLB_V6_U_FULL, "c8, c7, 0", zero); tlb_op(TLB_V4_D_FULL | TLB_V6_D_FULL, "c8, c6, 0", zero); tlb_op(TLB_V4_I_FULL | TLB_V6_I_FULL, "c8, c5, 0", zero); @@ -351,9 +347,8 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm) if (tlb_flag(TLB_WB)) dsb(); - if (possible_tlb_flags & (TLB_V3_FULL|TLB_V4_U_FULL|TLB_V4_D_FULL|TLB_V4_I_FULL)) { + if (possible_tlb_flags & (TLB_V4_U_FULL|TLB_V4_D_FULL|TLB_V4_I_FULL)) { if (cpumask_test_cpu(get_cpu(), mm_cpumask(mm))) { - tlb_op(TLB_V3_FULL, "c6, c0, 0", zero); tlb_op(TLB_V4_U_FULL, "c8, c7, 0", zero); tlb_op(TLB_V4_D_FULL, "c8, c6, 0", zero); tlb_op(TLB_V4_I_FULL, "c8, c5, 0", zero); @@ -385,9 +380,8 @@ local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr) if (tlb_flag(TLB_WB)) dsb(); - if (possible_tlb_flags & (TLB_V3_PAGE|TLB_V4_U_PAGE|TLB_V4_D_PAGE|TLB_V4_I_PAGE|TLB_V4_I_FULL) && + if (possible_tlb_flags & (TLB_V4_U_PAGE|TLB_V4_D_PAGE|TLB_V4_I_PAGE|TLB_V4_I_FULL) && cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) { - tlb_op(TLB_V3_PAGE, "c6, c0, 0", uaddr); tlb_op(TLB_V4_U_PAGE, "c8, c7, 1", uaddr); tlb_op(TLB_V4_D_PAGE, "c8, c6, 1", uaddr); tlb_op(TLB_V4_I_PAGE, "c8, c5, 1", uaddr); @@ -418,7 +412,6 @@ static inline void local_flush_tlb_kernel_page(unsigned long kaddr) if (tlb_flag(TLB_WB)) dsb(); - tlb_op(TLB_V3_PAGE, "c6, c0, 0", kaddr); tlb_op(TLB_V4_U_PAGE, "c8, c7, 1", kaddr); tlb_op(TLB_V4_D_PAGE, "c8, c6, 1", kaddr); tlb_op(TLB_V4_I_PAGE, "c8, c5, 1", kaddr); diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h index e4ddfb39ca34..141baa3f9a72 100644 --- a/arch/arm/include/asm/unistd.h +++ b/arch/arm/include/asm/unistd.h @@ -44,14 +44,6 @@ #define __ARCH_WANT_SYS_CLONE /* - * "Conditional" syscalls - * - * What we want is __attribute__((weak,alias("sys_ni_syscall"))), - * but it doesn't work on all toolchains, so we just do it by hand - */ -#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall") - -/* * Unimplemented (or alternatively implemented) syscalls */ #define __IGNORE_fadvise64_64 diff --git a/arch/arm/include/asm/xen/hypercall.h b/arch/arm/include/asm/xen/hypercall.h index 8a823253d775..799f42ecca63 100644 --- a/arch/arm/include/asm/xen/hypercall.h +++ b/arch/arm/include/asm/xen/hypercall.h @@ -46,6 +46,7 @@ int HYPERVISOR_event_channel_op(int cmd, void *arg); unsigned long HYPERVISOR_hvm_op(int op, void *arg); int HYPERVISOR_memory_op(unsigned int cmd, void *arg); int HYPERVISOR_physdev_op(int cmd, void *arg); +int HYPERVISOR_vcpu_op(int cmd, int vcpuid, void *extra_args); static inline void MULTI_update_va_mapping(struct multicall_entry *mcl, unsigned long va, diff --git a/arch/arm/mach-bcm2835/include/mach/debug-macro.S b/arch/arm/include/debug/bcm2835.S index 8a161e44ae28..aed9199bd847 100644 --- a/arch/arm/mach-bcm2835/include/mach/debug-macro.S +++ b/arch/arm/include/debug/bcm2835.S @@ -11,7 +11,8 @@ * */ -#include <mach/bcm2835_soc.h> +#define BCM2835_DEBUG_PHYS 0x20201000 +#define BCM2835_DEBUG_VIRT 0xf0201000 .macro addruart, rp, rv, tmp ldr \rp, =BCM2835_DEBUG_PHYS diff --git a/arch/arm/mach-cns3xxx/include/mach/debug-macro.S b/arch/arm/include/debug/cns3xxx.S index d04c150baa1c..d04c150baa1c 100644 --- a/arch/arm/mach-cns3xxx/include/mach/debug-macro.S +++ b/arch/arm/include/debug/cns3xxx.S diff --git a/arch/arm/mach-exynos/include/mach/debug-macro.S b/arch/arm/include/debug/exynos.S index e0c86ea475e7..b17fdb7fbd34 100644 --- a/arch/arm/mach-exynos/include/mach/debug-macro.S +++ b/arch/arm/include/debug/exynos.S @@ -1,10 +1,7 @@ -/* linux/arch/arm/mach-exynos4/include/mach/debug-macro.S - * +/* * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. * http://www.samsung.com * - * Based on arch/arm/mach-s3c6400/include/mach/debug-macro.S - * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. @@ -12,7 +9,10 @@ /* pull in the relevant register and map files. */ -#include <mach/map.h> +#define S3C_ADDR_BASE 0xF6000000 +#define S3C_VA_UART S3C_ADDR_BASE + 0x01000000 +#define EXYNOS4_PA_UART 0x13800000 +#define EXYNOS5_PA_UART 0x12C00000 /* note, for the boot process to work we have to keep the UART * virtual address aligned to an 1MiB boundary for the L1 @@ -36,4 +36,4 @@ #define fifo_full fifo_full_s5pv210 #define fifo_level fifo_level_s5pv210 -#include <plat/debug-macro.S> +#include <debug/samsung.S> diff --git a/arch/arm/include/debug/mvebu.S b/arch/arm/include/debug/mvebu.S index 865c6d02b332..df191afa3be1 100644 --- a/arch/arm/include/debug/mvebu.S +++ b/arch/arm/include/debug/mvebu.S @@ -12,7 +12,7 @@ */ #define ARMADA_370_XP_REGS_PHYS_BASE 0xd0000000 -#define ARMADA_370_XP_REGS_VIRT_BASE 0xfeb00000 +#define ARMADA_370_XP_REGS_VIRT_BASE 0xfec00000 .macro addruart, rp, rv, tmp ldr \rp, =ARMADA_370_XP_REGS_PHYS_BASE diff --git a/arch/arm/mach-mxs/include/mach/debug-macro.S b/arch/arm/include/debug/mxs.S index 90c6b7836ad3..d86951551ca1 100644 --- a/arch/arm/mach-mxs/include/mach/debug-macro.S +++ b/arch/arm/include/debug/mxs.S @@ -11,16 +11,13 @@ * */ -#include <mach/mx23.h> -#include <mach/mx28.h> - #ifdef CONFIG_DEBUG_IMX23_UART -#define UART_PADDR MX23_DUART_BASE_ADDR +#define UART_PADDR 0x80070000 #elif defined (CONFIG_DEBUG_IMX28_UART) -#define UART_PADDR MX28_DUART_BASE_ADDR +#define UART_PADDR 0x80074000 #endif -#define UART_VADDR MXS_IO_ADDRESS(UART_PADDR) +#define UART_VADDR 0xfe100000 .macro addruart, rp, rv, tmp ldr \rp, =UART_PADDR @ physical diff --git a/arch/arm/mach-nomadik/include/mach/debug-macro.S b/arch/arm/include/debug/nomadik.S index 735417922ce2..735417922ce2 100644 --- a/arch/arm/mach-nomadik/include/mach/debug-macro.S +++ b/arch/arm/include/debug/nomadik.S diff --git a/arch/arm/include/debug/pxa.S b/arch/arm/include/debug/pxa.S new file mode 100644 index 000000000000..e1e795aa3d7f --- /dev/null +++ b/arch/arm/include/debug/pxa.S @@ -0,0 +1,33 @@ +/* + * Early serial output macro for Marvell PXA/MMP SoC + * + * Copyright (C) 1994-1999 Russell King + * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks + * + * Copyright (C) 2013 Haojian Zhuang + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#if defined(CONFIG_DEBUG_PXA_UART1) +#define PXA_UART_REG_PHYS_BASE 0x40100000 +#define PXA_UART_REG_VIRT_BASE 0xf2100000 +#elif defined(CONFIG_DEBUG_MMP_UART2) +#define PXA_UART_REG_PHYS_BASE 0xd4017000 +#define PXA_UART_REG_VIRT_BASE 0xfe017000 +#elif defined(CONFIG_DEBUG_MMP_UART3) +#define PXA_UART_REG_PHYS_BASE 0xd4018000 +#define PXA_UART_REG_VIRT_BASE 0xfe018000 +#else +#error "Select uart for DEBUG_LL" +#endif + + .macro addruart, rp, rv, tmp + ldr \rp, =PXA_UART_REG_PHYS_BASE + ldr \rv, =PXA_UART_REG_VIRT_BASE + .endm + +#define UART_SHIFT 2 +#include <asm/hardware/debug-8250.S> diff --git a/arch/arm/plat-samsung/include/plat/debug-macro.S b/arch/arm/include/debug/samsung.S index f3a9cff6d5d4..f3a9cff6d5d4 100644 --- a/arch/arm/plat-samsung/include/plat/debug-macro.S +++ b/arch/arm/include/debug/samsung.S diff --git a/arch/arm/mach-prima2/include/mach/uart.h b/arch/arm/include/debug/sirf.S index c10510d01a44..dbf250cf18e6 100644 --- a/arch/arm/mach-prima2/include/mach/uart.h +++ b/arch/arm/include/debug/sirf.S @@ -1,15 +1,11 @@ /* - * arch/arm/mach-prima2/include/mach/uart.h + * arch/arm/mach-prima2/include/mach/debug-macro.S * * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. * * Licensed under GPLv2 or later. */ -#ifndef __MACH_PRIMA2_SIRFSOC_UART_H -#define __MACH_PRIMA2_SIRFSOC_UART_H - -/* UART-1: used as serial debug port */ #if defined(CONFIG_DEBUG_SIRFPRIMA2_UART1) #define SIRFSOC_UART1_PA_BASE 0xb0060000 #elif defined(CONFIG_DEBUG_SIRFMARCO_UART1) @@ -17,8 +13,8 @@ #else #define SIRFSOC_UART1_PA_BASE 0 #endif -#define SIRFSOC_UART1_VA_BASE SIRFSOC_VA(0x060000) -#define SIRFSOC_UART1_SIZE SZ_4K + +#define SIRFSOC_UART1_VA_BASE 0xFEC60000 #define SIRFSOC_UART_TXFIFO_STATUS 0x0114 #define SIRFSOC_UART_TXFIFO_DATA 0x0118 @@ -26,4 +22,21 @@ #define SIRFSOC_UART1_TXFIFO_FULL (1 << 5) #define SIRFSOC_UART1_TXFIFO_EMPTY (1 << 6) -#endif + .macro addruart, rp, rv, tmp + ldr \rp, =SIRFSOC_UART1_PA_BASE @ physical + ldr \rv, =SIRFSOC_UART1_VA_BASE @ virtual + .endm + + .macro senduart,rd,rx + str \rd, [\rx, #SIRFSOC_UART_TXFIFO_DATA] + .endm + + .macro busyuart,rd,rx + .endm + + .macro waituart,rd,rx +1001: ldr \rd, [\rx, #SIRFSOC_UART_TXFIFO_STATUS] + tst \rd, #SIRFSOC_UART1_TXFIFO_EMPTY + beq 1001b + .endm + diff --git a/arch/arm/include/debug/uncompress.h b/arch/arm/include/debug/uncompress.h new file mode 100644 index 000000000000..0e2949b0fae9 --- /dev/null +++ b/arch/arm/include/debug/uncompress.h @@ -0,0 +1,7 @@ +#ifdef CONFIG_DEBUG_UNCOMPRESS +extern void putc(int c); +#else +static inline void putc(int c) {} +#endif +static inline void flush(void) {} +static inline void arch_decomp_setup(void) {} diff --git a/arch/arm/include/debug/ux500.S b/arch/arm/include/debug/ux500.S new file mode 100644 index 000000000000..2848857f5b62 --- /dev/null +++ b/arch/arm/include/debug/ux500.S @@ -0,0 +1,48 @@ +/* + * Debugging macro include header + * + * Copyright (C) 2009 ST-Ericsson + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + + +#if CONFIG_UX500_DEBUG_UART > 2 +#error Invalid Ux500 debug UART +#endif + +/* + * DEBUG_LL only works if only one SOC is built in. We don't use #else below + * in order to get "__UX500_UART redefined" warnings if more than one SOC is + * built, so that there's some hint during the build that something is wrong. + */ + +#ifdef CONFIG_UX500_SOC_DB8500 +#define U8500_UART0_PHYS_BASE (0x80120000) +#define U8500_UART1_PHYS_BASE (0x80121000) +#define U8500_UART2_PHYS_BASE (0x80007000) +#define U8500_UART0_VIRT_BASE (0xa8120000) +#define U8500_UART1_VIRT_BASE (0xa8121000) +#define U8500_UART2_VIRT_BASE (0xa8007000) +#define __UX500_PHYS_UART(n) U8500_UART##n##_PHYS_BASE +#define __UX500_VIRT_UART(n) U8500_UART##n##_VIRT_BASE +#endif + +#if !defined(__UX500_PHYS_UART) || !defined(__UX500_VIRT_UART) +#error Unknown SOC +#endif + +#define UX500_PHYS_UART(n) __UX500_PHYS_UART(n) +#define UX500_VIRT_UART(n) __UX500_VIRT_UART(n) +#define UART_PHYS_BASE UX500_PHYS_UART(CONFIG_UX500_DEBUG_UART) +#define UART_VIRT_BASE UX500_VIRT_UART(CONFIG_UX500_DEBUG_UART) + + .macro addruart, rp, rv, tmp + ldr \rp, =UART_PHYS_BASE @ no, physical address + ldr \rv, =UART_VIRT_BASE @ yes, virtual address + .endm + +#include <asm/hardware/debug-pl01x.S> diff --git a/arch/arm/include/uapi/asm/kvm.h b/arch/arm/include/uapi/asm/kvm.h index 023bfeb367bf..c1ee007523d7 100644 --- a/arch/arm/include/uapi/asm/kvm.h +++ b/arch/arm/include/uapi/asm/kvm.h @@ -53,12 +53,12 @@ #define KVM_ARM_FIQ_spsr fiq_regs[7] struct kvm_regs { - struct pt_regs usr_regs;/* R0_usr - R14_usr, PC, CPSR */ - __u32 svc_regs[3]; /* SP_svc, LR_svc, SPSR_svc */ - __u32 abt_regs[3]; /* SP_abt, LR_abt, SPSR_abt */ - __u32 und_regs[3]; /* SP_und, LR_und, SPSR_und */ - __u32 irq_regs[3]; /* SP_irq, LR_irq, SPSR_irq */ - __u32 fiq_regs[8]; /* R8_fiq - R14_fiq, SPSR_fiq */ + struct pt_regs usr_regs; /* R0_usr - R14_usr, PC, CPSR */ + unsigned long svc_regs[3]; /* SP_svc, LR_svc, SPSR_svc */ + unsigned long abt_regs[3]; /* SP_abt, LR_abt, SPSR_abt */ + unsigned long und_regs[3]; /* SP_und, LR_und, SPSR_und */ + unsigned long irq_regs[3]; /* SP_irq, LR_irq, SPSR_irq */ + unsigned long fiq_regs[8]; /* R8_fiq - R14_fiq, SPSR_fiq */ }; /* Supported Processor Types */ diff --git a/arch/arm/kernel/arch_timer.c b/arch/arm/kernel/arch_timer.c index d957a51435d8..59dcdced6e30 100644 --- a/arch/arm/kernel/arch_timer.c +++ b/arch/arm/kernel/arch_timer.c @@ -22,9 +22,11 @@ static unsigned long arch_timer_read_counter_long(void) return arch_timer_read_counter(); } -static u32 arch_timer_read_counter_u32(void) +static u32 sched_clock_mult __read_mostly; + +static unsigned long long notrace arch_timer_sched_clock(void) { - return arch_timer_read_counter(); + return arch_timer_read_counter() * sched_clock_mult; } static struct delay_timer arch_delay_timer; @@ -37,25 +39,20 @@ static void __init arch_timer_delay_timer_register(void) register_current_timer_delay(&arch_delay_timer); } -int __init arch_timer_of_register(void) +int __init arch_timer_arch_init(void) { - int ret; + u32 arch_timer_rate = arch_timer_get_rate(); - ret = arch_timer_init(); - if (ret) - return ret; + if (arch_timer_rate == 0) + return -ENXIO; arch_timer_delay_timer_register(); - return 0; -} - -int __init arch_timer_sched_clock_init(void) -{ - if (arch_timer_get_rate() == 0) - return -ENXIO; + /* Cache the sched_clock multiplier to save a divide in the hot path. */ + sched_clock_mult = NSEC_PER_SEC / arch_timer_rate; + sched_clock_func = arch_timer_sched_clock; + pr_info("sched_clock: ARM arch timer >56 bits at %ukHz, resolution %uns\n", + arch_timer_rate / 1000, sched_clock_mult); - setup_sched_clock(arch_timer_read_counter_u32, - 32, arch_timer_get_rate()); return 0; } diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c index 923eec7105cf..ee68cce6b48e 100644 --- a/arch/arm/kernel/asm-offsets.c +++ b/arch/arm/kernel/asm-offsets.c @@ -149,12 +149,16 @@ int main(void) DEFINE(DMA_BIDIRECTIONAL, DMA_BIDIRECTIONAL); DEFINE(DMA_TO_DEVICE, DMA_TO_DEVICE); DEFINE(DMA_FROM_DEVICE, DMA_FROM_DEVICE); + BLANK(); + DEFINE(CACHE_WRITEBACK_ORDER, __CACHE_WRITEBACK_ORDER); + DEFINE(CACHE_WRITEBACK_GRANULE, __CACHE_WRITEBACK_GRANULE); + BLANK(); #ifdef CONFIG_KVM_ARM_HOST DEFINE(VCPU_KVM, offsetof(struct kvm_vcpu, kvm)); DEFINE(VCPU_MIDR, offsetof(struct kvm_vcpu, arch.midr)); DEFINE(VCPU_CP15, offsetof(struct kvm_vcpu, arch.cp15)); DEFINE(VCPU_VFP_GUEST, offsetof(struct kvm_vcpu, arch.vfp_guest)); - DEFINE(VCPU_VFP_HOST, offsetof(struct kvm_vcpu, arch.vfp_host)); + DEFINE(VCPU_VFP_HOST, offsetof(struct kvm_vcpu, arch.host_cpu_context)); DEFINE(VCPU_REGS, offsetof(struct kvm_vcpu, arch.regs)); DEFINE(VCPU_USR_REGS, offsetof(struct kvm_vcpu, arch.regs.usr_regs)); DEFINE(VCPU_SVC_REGS, offsetof(struct kvm_vcpu, arch.regs.svc_regs)); @@ -165,10 +169,10 @@ int main(void) DEFINE(VCPU_PC, offsetof(struct kvm_vcpu, arch.regs.usr_regs.ARM_pc)); DEFINE(VCPU_CPSR, offsetof(struct kvm_vcpu, arch.regs.usr_regs.ARM_cpsr)); DEFINE(VCPU_IRQ_LINES, offsetof(struct kvm_vcpu, arch.irq_lines)); - DEFINE(VCPU_HSR, offsetof(struct kvm_vcpu, arch.hsr)); - DEFINE(VCPU_HxFAR, offsetof(struct kvm_vcpu, arch.hxfar)); - DEFINE(VCPU_HPFAR, offsetof(struct kvm_vcpu, arch.hpfar)); - DEFINE(VCPU_HYP_PC, offsetof(struct kvm_vcpu, arch.hyp_pc)); + DEFINE(VCPU_HSR, offsetof(struct kvm_vcpu, arch.fault.hsr)); + DEFINE(VCPU_HxFAR, offsetof(struct kvm_vcpu, arch.fault.hxfar)); + DEFINE(VCPU_HPFAR, offsetof(struct kvm_vcpu, arch.fault.hpfar)); + DEFINE(VCPU_HYP_PC, offsetof(struct kvm_vcpu, arch.fault.hyp_pc)); #ifdef CONFIG_KVM_ARM_VGIC DEFINE(VCPU_VGIC_CPU, offsetof(struct kvm_vcpu, arch.vgic_cpu)); DEFINE(VGIC_CPU_HCR, offsetof(struct vgic_cpu, vgic_hcr)); diff --git a/arch/arm/kernel/atags_proc.c b/arch/arm/kernel/atags_proc.c index 42a1a1415fa6..c7ff8073416f 100644 --- a/arch/arm/kernel/atags_proc.c +++ b/arch/arm/kernel/atags_proc.c @@ -9,24 +9,18 @@ struct buffer { char data[]; }; -static int -read_buffer(char* page, char** start, off_t off, int count, - int* eof, void* data) +static ssize_t atags_read(struct file *file, char __user *buf, + size_t count, loff_t *ppos) { - struct buffer *buffer = (struct buffer *)data; - - if (off >= buffer->size) { - *eof = 1; - return 0; - } - - count = min((int) (buffer->size - off), count); - - memcpy(page, &buffer->data[off], count); - - return count; + struct buffer *b = PDE_DATA(file_inode(file)); + return simple_read_from_buffer(buf, count, ppos, b->data, b->size); } +static const struct file_operations atags_fops = { + .read = atags_read, + .llseek = default_llseek, +}; + #define BOOT_PARAMS_SIZE 1536 static char __initdata atags_copy[BOOT_PARAMS_SIZE]; @@ -66,9 +60,7 @@ static int __init init_atags_procfs(void) b->size = size; memcpy(b->data, atags_copy, size); - tags_entry = create_proc_read_entry("atags", 0400, - NULL, read_buffer, b); - + tags_entry = proc_create_data("atags", 0400, NULL, &atags_fops, b); if (!tags_entry) goto nomem; diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c index a1f73b502ef0..b2ed73c45489 100644 --- a/arch/arm/kernel/bios32.c +++ b/arch/arm/kernel/bios32.c @@ -462,6 +462,7 @@ static void pcibios_init_hw(struct hw_pci *hw, struct list_head *head) sys->busnr = busnr; sys->swizzle = hw->swizzle; sys->map_irq = hw->map_irq; + sys->align_resource = hw->align_resource; INIT_LIST_HEAD(&sys->resources); if (hw->private_data) @@ -574,6 +575,8 @@ char * __init pcibios_setup(char *str) resource_size_t pcibios_align_resource(void *data, const struct resource *res, resource_size_t size, resource_size_t align) { + struct pci_dev *dev = data; + struct pci_sys_data *sys = dev->sysdata; resource_size_t start = res->start; if (res->flags & IORESOURCE_IO && start & 0x300) @@ -581,6 +584,9 @@ resource_size_t pcibios_align_resource(void *data, const struct resource *res, start = (start + align - 1) & ~(align - 1); + if (sys->align_resource) + return sys->align_resource(dev, res, start, size, align); + return start; } diff --git a/arch/arm/kernel/early_printk.c b/arch/arm/kernel/early_printk.c index 85aa2b292692..43076536965c 100644 --- a/arch/arm/kernel/early_printk.c +++ b/arch/arm/kernel/early_printk.c @@ -29,28 +29,17 @@ static void early_console_write(struct console *con, const char *s, unsigned n) early_write(s, n); } -static struct console early_console = { +static struct console early_console_dev = { .name = "earlycon", .write = early_console_write, .flags = CON_PRINTBUFFER | CON_BOOT, .index = -1, }; -asmlinkage void early_printk(const char *fmt, ...) -{ - char buf[512]; - int n; - va_list ap; - - va_start(ap, fmt); - n = vscnprintf(buf, sizeof(buf), fmt, ap); - early_write(buf, n); - va_end(ap); -} - static int __init setup_early_printk(char *buf) { - register_console(&early_console); + early_console = &early_console_dev; + register_console(&early_console_dev); return 0; } diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 0f82098c9bfe..582b405befc5 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -192,18 +192,6 @@ __dabt_svc: svc_entry mov r2, sp dabt_helper - - @ - @ IRQs off again before pulling preserved data off the stack - @ - disable_irq_notrace - -#ifdef CONFIG_TRACE_IRQFLAGS - tst r5, #PSR_I_BIT - bleq trace_hardirqs_on - tst r5, #PSR_I_BIT - blne trace_hardirqs_off -#endif svc_exit r5 @ return from exception UNWIND(.fnend ) ENDPROC(__dabt_svc) @@ -223,12 +211,7 @@ __irq_svc: blne svc_preempt #endif -#ifdef CONFIG_TRACE_IRQFLAGS - @ The parent context IRQs must have been enabled to get here in - @ the first place, so there's no point checking the PSR I bit. - bl trace_hardirqs_on -#endif - svc_exit r5 @ return from exception + svc_exit r5, irq = 1 @ return from exception UNWIND(.fnend ) ENDPROC(__irq_svc) @@ -295,22 +278,8 @@ __und_svc_fault: mov r0, sp @ struct pt_regs *regs bl __und_fault - @ - @ IRQs off again before pulling preserved data off the stack - @ __und_svc_finish: - disable_irq_notrace - - @ - @ restore SPSR and restart the instruction - @ ldr r5, [sp, #S_PSR] @ Get SVC cpsr -#ifdef CONFIG_TRACE_IRQFLAGS - tst r5, #PSR_I_BIT - bleq trace_hardirqs_on - tst r5, #PSR_I_BIT - blne trace_hardirqs_off -#endif svc_exit r5 @ return from exception UNWIND(.fnend ) ENDPROC(__und_svc) @@ -320,18 +289,6 @@ __pabt_svc: svc_entry mov r2, sp @ regs pabt_helper - - @ - @ IRQs off again before pulling preserved data off the stack - @ - disable_irq_notrace - -#ifdef CONFIG_TRACE_IRQFLAGS - tst r5, #PSR_I_BIT - bleq trace_hardirqs_on - tst r5, #PSR_I_BIT - blne trace_hardirqs_off -#endif svc_exit r5 @ return from exception UNWIND(.fnend ) ENDPROC(__pabt_svc) @@ -396,6 +353,7 @@ ENDPROC(__pabt_svc) #ifdef CONFIG_IRQSOFF_TRACER bl trace_hardirqs_off #endif + ct_user_exit save = 0 .endm .macro kuser_cmpxchg_check @@ -562,21 +520,21 @@ ENDPROC(__und_usr) @ Fall-through from Thumb-2 __und_usr @ #ifdef CONFIG_NEON + get_thread_info r10 @ get current thread adr r6, .LCneon_thumb_opcodes b 2f #endif call_fpe: + get_thread_info r10 @ get current thread #ifdef CONFIG_NEON adr r6, .LCneon_arm_opcodes -2: - ldr r7, [r6], #4 @ mask value - cmp r7, #0 @ end mask? - beq 1f - and r8, r0, r7 +2: ldr r5, [r6], #4 @ mask value ldr r7, [r6], #4 @ opcode bits matching in mask + cmp r5, #0 @ end mask? + beq 1f + and r8, r0, r5 cmp r8, r7 @ NEON instruction? bne 2b - get_thread_info r10 mov r7, #1 strb r7, [r10, #TI_USED_CP + 10] @ mark CP#10 as used strb r7, [r10, #TI_USED_CP + 11] @ mark CP#11 as used @@ -586,7 +544,6 @@ call_fpe: tst r0, #0x08000000 @ only CDP/CPRT/LDC/STC have bit 27 tstne r0, #0x04000000 @ bit 26 set on both ARM and Thumb-2 moveq pc, lr - get_thread_info r10 @ get current thread and r8, r0, #0x00000f00 @ mask out CP number THUMB( lsr r8, r8, #8 ) mov r7, #1 diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index fefd7f971437..bc5bc0a97131 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -35,12 +35,11 @@ ret_fast_syscall: ldr r1, [tsk, #TI_FLAGS] tst r1, #_TIF_WORK_MASK bne fast_work_pending -#if defined(CONFIG_IRQSOFF_TRACER) asm_trace_hardirqs_on -#endif /* perform architecture specific actions before user return */ arch_ret_to_user r1, lr + ct_user_enter restore_user_regs fast = 1, offset = S_OFF UNWIND(.fnend ) @@ -71,11 +70,11 @@ ENTRY(ret_to_user_from_irq) tst r1, #_TIF_WORK_MASK bne work_pending no_work_pending: -#if defined(CONFIG_IRQSOFF_TRACER) asm_trace_hardirqs_on -#endif + /* perform architecture specific actions before user return */ arch_ret_to_user r1, lr + ct_user_enter save = 0 restore_user_regs fast = 0, offset = 0 ENDPROC(ret_to_user_from_irq) @@ -406,6 +405,7 @@ ENTRY(vector_swi) mcr p15, 0, ip, c1, c0 @ update control register #endif enable_irq + ct_user_exit get_thread_info tsk adr tbl, sys_call_table @ load syscall table pointer diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S index 9a8531eadd3d..160f3376ba6d 100644 --- a/arch/arm/kernel/entry-header.S +++ b/arch/arm/kernel/entry-header.S @@ -74,7 +74,24 @@ .endm #ifndef CONFIG_THUMB2_KERNEL - .macro svc_exit, rpsr + .macro svc_exit, rpsr, irq = 0 + .if \irq != 0 + @ IRQs already off +#ifdef CONFIG_TRACE_IRQFLAGS + @ The parent context IRQs must have been enabled to get here in + @ the first place, so there's no point checking the PSR I bit. + bl trace_hardirqs_on +#endif + .else + @ IRQs off again before pulling preserved data off the stack + disable_irq_notrace +#ifdef CONFIG_TRACE_IRQFLAGS + tst \rpsr, #PSR_I_BIT + bleq trace_hardirqs_on + tst \rpsr, #PSR_I_BIT + blne trace_hardirqs_off +#endif + .endif msr spsr_cxsf, \rpsr #if defined(CONFIG_CPU_V6) ldr r0, [sp] @@ -120,7 +137,24 @@ mov pc, \reg .endm #else /* CONFIG_THUMB2_KERNEL */ - .macro svc_exit, rpsr + .macro svc_exit, rpsr, irq = 0 + .if \irq != 0 + @ IRQs already off +#ifdef CONFIG_TRACE_IRQFLAGS + @ The parent context IRQs must have been enabled to get here in + @ the first place, so there's no point checking the PSR I bit. + bl trace_hardirqs_on +#endif + .else + @ IRQs off again before pulling preserved data off the stack + disable_irq_notrace +#ifdef CONFIG_TRACE_IRQFLAGS + tst \rpsr, #PSR_I_BIT + bleq trace_hardirqs_on + tst \rpsr, #PSR_I_BIT + blne trace_hardirqs_off +#endif + .endif ldr lr, [sp, #S_SP] @ top of the stack ldrd r0, r1, [sp, #S_LR] @ calling lr and pc clrex @ clear the exclusive monitor @@ -164,6 +198,34 @@ #endif /* !CONFIG_THUMB2_KERNEL */ /* + * Context tracking subsystem. Used to instrument transitions + * between user and kernel mode. + */ + .macro ct_user_exit, save = 1 +#ifdef CONFIG_CONTEXT_TRACKING + .if \save + stmdb sp!, {r0-r3, ip, lr} + bl user_exit + ldmia sp!, {r0-r3, ip, lr} + .else + bl user_exit + .endif +#endif + .endm + + .macro ct_user_enter, save = 1 +#ifdef CONFIG_CONTEXT_TRACKING + .if \save + stmdb sp!, {r0-r3, ip, lr} + bl user_enter + ldmia sp!, {r0-r3, ip, lr} + .else + bl user_enter + .endif +#endif + .endm + +/* * These are the registers used in the syscall handler, and allow us to * have in theory up to 7 arguments to a function - r0 to r6. * diff --git a/arch/arm/kernel/etm.c b/arch/arm/kernel/etm.c index 9b6de8c988f3..8ff0ecdc637f 100644 --- a/arch/arm/kernel/etm.c +++ b/arch/arm/kernel/etm.c @@ -254,7 +254,7 @@ static void sysrq_etm_dump(int key) static struct sysrq_key_op sysrq_etm_op = { .handler = sysrq_etm_dump, - .help_msg = "ETM buffer dump", + .help_msg = "etm-buffer-dump(v)", .action_msg = "etm", }; diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S index 854bd22380d3..5b391a689b47 100644 --- a/arch/arm/kernel/head-common.S +++ b/arch/arm/kernel/head-common.S @@ -98,8 +98,9 @@ __mmap_switched: str r9, [r4] @ Save processor ID str r1, [r5] @ Save machine type str r2, [r6] @ Save atags pointer - bic r4, r0, #CR_A @ Clear 'A' bit - stmia r7, {r0, r4} @ Save control register values + cmp r7, #0 + bicne r4, r0, #CR_A @ Clear 'A' bit + stmneia r7, {r0, r4} @ Save control register values b start_kernel ENDPROC(__mmap_switched) @@ -113,7 +114,11 @@ __mmap_switched_data: .long processor_id @ r4 .long __machine_arch_type @ r5 .long __atags_pointer @ r6 +#ifdef CONFIG_CPU_CP15 .long cr_alignment @ r7 +#else + .long 0 @ r7 +#endif .long init_thread_union + THREAD_START_SP @ sp .size __mmap_switched_data, . - __mmap_switched_data diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S index 2c228a07e58c..6a2e09c952c7 100644 --- a/arch/arm/kernel/head-nommu.S +++ b/arch/arm/kernel/head-nommu.S @@ -32,15 +32,21 @@ * numbers for r1. * */ - .arm __HEAD + +#ifdef CONFIG_CPU_THUMBONLY + .thumb +ENTRY(stext) +#else + .arm ENTRY(stext) THUMB( adr r9, BSYM(1f) ) @ Kernel is always entered in ARM. THUMB( bx r9 ) @ If this is a Thumb-2 kernel, THUMB( .thumb ) @ switch to Thumb now. THUMB(1: ) +#endif setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 @ ensure svc mode @ and irqs disabled diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index 5dc1aa6f0f7d..1fd749ee4a1b 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -1043,7 +1043,7 @@ static int dbg_cpu_pm_notify(struct notifier_block *self, unsigned long action, return NOTIFY_OK; } -static struct notifier_block __cpuinitdata dbg_cpu_pm_nb = { +static struct notifier_block dbg_cpu_pm_nb = { .notifier_call = dbg_cpu_pm_notify, }; diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 8e4ef4c83a74..9723d17b8f38 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -26,6 +26,7 @@ #include <linux/ioport.h> #include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/irqchip.h> #include <linux/random.h> #include <linux/smp.h> #include <linux/init.h> @@ -114,7 +115,10 @@ EXPORT_SYMBOL_GPL(set_irq_flags); void __init init_IRQ(void) { - machine_desc->init_irq(); + if (IS_ENABLED(CONFIG_OF) && !machine_desc->init_irq) + irqchip_init(); + else + machine_desc->init_irq(); } #ifdef CONFIG_MULTI_IRQ_HANDLER diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 146157dfe27c..8c3094d0f7b7 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -253,7 +253,10 @@ validate_event(struct pmu_hw_events *hw_events, struct arm_pmu *armpmu = to_arm_pmu(event->pmu); struct pmu *leader_pmu = event->group_leader->pmu; - if (event->pmu != leader_pmu || event->state <= PERF_EVENT_STATE_OFF) + if (event->pmu != leader_pmu || event->state < PERF_EVENT_STATE_OFF) + return 1; + + if (event->state == PERF_EVENT_STATE_OFF && !event->attr.enable_on_exec) return 1; return armpmu->get_event_idx(hw_events, event) >= 0; diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 047d3e40e470..f21970316836 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -57,38 +57,6 @@ static const char *isa_modes[] = { "ARM" , "Thumb" , "Jazelle", "ThumbEE" }; -static volatile int hlt_counter; - -void disable_hlt(void) -{ - hlt_counter++; -} - -EXPORT_SYMBOL(disable_hlt); - -void enable_hlt(void) -{ - hlt_counter--; - BUG_ON(hlt_counter < 0); -} - -EXPORT_SYMBOL(enable_hlt); - -static int __init nohlt_setup(char *__unused) -{ - hlt_counter = 1; - return 1; -} - -static int __init hlt_setup(char *__unused) -{ - hlt_counter = 0; - return 1; -} - -__setup("nohlt", nohlt_setup); -__setup("hlt", hlt_setup); - extern void call_with_stack(void (*fn)(void *), void *arg, void *sp); typedef void (*phys_reset_t)(unsigned long); @@ -172,54 +140,38 @@ static void default_idle(void) local_irq_enable(); } -/* - * The idle thread. - * We always respect 'hlt_counter' to prevent low power idle. - */ -void cpu_idle(void) +void arch_cpu_idle_prepare(void) { local_fiq_enable(); +} - /* endless idle loop with no priority at all */ - while (1) { - tick_nohz_idle_enter(); - rcu_idle_enter(); - ledtrig_cpu(CPU_LED_IDLE_START); - while (!need_resched()) { -#ifdef CONFIG_HOTPLUG_CPU - if (cpu_is_offline(smp_processor_id())) - cpu_die(); +void arch_cpu_idle_enter(void) +{ + ledtrig_cpu(CPU_LED_IDLE_START); +#ifdef CONFIG_PL310_ERRATA_769419 + wmb(); #endif +} - /* - * We need to disable interrupts here - * to ensure we don't miss a wakeup call. - */ - local_irq_disable(); -#ifdef CONFIG_PL310_ERRATA_769419 - wmb(); +void arch_cpu_idle_exit(void) +{ + ledtrig_cpu(CPU_LED_IDLE_END); +} + +#ifdef CONFIG_HOTPLUG_CPU +void arch_cpu_idle_dead(void) +{ + cpu_die(); +} #endif - if (hlt_counter) { - local_irq_enable(); - cpu_relax(); - } else if (!need_resched()) { - stop_critical_timings(); - if (cpuidle_idle_call()) - default_idle(); - start_critical_timings(); - /* - * default_idle functions must always - * return with IRQs enabled. - */ - WARN_ON(irqs_disabled()); - } else - local_irq_enable(); - } - ledtrig_cpu(CPU_LED_IDLE_END); - rcu_idle_exit(); - tick_nohz_idle_exit(); - schedule_preempt_disabled(); - } + +/* + * Called from the core idle loop. + */ +void arch_cpu_idle(void) +{ + if (cpuidle_idle_call()) + default_idle(); } static char reboot_mode = 'h'; @@ -273,11 +225,8 @@ void __show_regs(struct pt_regs *regs) unsigned long flags; char buf[64]; - printk("CPU: %d %s (%s %.*s)\n", - raw_smp_processor_id(), print_tainted(), - init_utsname()->release, - (int)strcspn(init_utsname()->version, " "), - init_utsname()->version); + show_regs_print_info(KERN_DEFAULT); + print_symbol("PC is at %s\n", instruction_pointer(regs)); print_symbol("LR is at %s\n", regs->ARM_lr); printk("pc : [<%08lx>] lr : [<%08lx>] psr: %08lx\n" @@ -332,7 +281,6 @@ void __show_regs(struct pt_regs *regs) void show_regs(struct pt_regs * regs) { printk("\n"); - printk("Pid: %d, comm: %20s\n", task_pid_nr(current), current->comm); __show_regs(regs); dump_stack(); } @@ -459,15 +407,16 @@ unsigned long arch_randomize_brk(struct mm_struct *mm) * atomic helpers and the signal restart code. Insert it into the * gate_vma so that it is visible through ptrace and /proc/<pid>/mem. */ -static struct vm_area_struct gate_vma; +static struct vm_area_struct gate_vma = { + .vm_start = 0xffff0000, + .vm_end = 0xffff0000 + PAGE_SIZE, + .vm_flags = VM_READ | VM_EXEC | VM_MAYREAD | VM_MAYEXEC, + .vm_mm = &init_mm, +}; static int __init gate_vma_init(void) { - gate_vma.vm_start = 0xffff0000; - gate_vma.vm_end = 0xffff0000 + PAGE_SIZE; - gate_vma.vm_page_prot = PAGE_READONLY_EXEC; - gate_vma.vm_flags = VM_READ | VM_EXEC | - VM_MAYREAD | VM_MAYEXEC; + gate_vma.vm_page_prot = PAGE_READONLY_EXEC; return 0; } arch_initcall(gate_vma_init); diff --git a/arch/arm/kernel/return_address.c b/arch/arm/kernel/return_address.c index 8085417555dd..fafedd86885d 100644 --- a/arch/arm/kernel/return_address.c +++ b/arch/arm/kernel/return_address.c @@ -26,7 +26,7 @@ static int save_return_addr(struct stackframe *frame, void *d) struct return_address_data *data = d; if (!data->level) { - data->addr = (void *)frame->lr; + data->addr = (void *)frame->pc; return 1; } else { @@ -41,7 +41,8 @@ void *return_address(unsigned int level) struct stackframe frame; register unsigned long current_sp asm ("sp"); - data.level = level + 1; + data.level = level + 2; + data.addr = NULL; frame.fp = (unsigned long)__builtin_frame_address(0); frame.sp = current_sp; diff --git a/arch/arm/kernel/sched_clock.c b/arch/arm/kernel/sched_clock.c index bd6f56b9ec21..e8edcaa0e432 100644 --- a/arch/arm/kernel/sched_clock.c +++ b/arch/arm/kernel/sched_clock.c @@ -20,6 +20,7 @@ struct clock_data { u64 epoch_ns; u32 epoch_cyc; u32 epoch_cyc_copy; + unsigned long rate; u32 mult; u32 shift; bool suspended; @@ -45,12 +46,12 @@ static u32 notrace jiffy_sched_clock_read(void) static u32 __read_mostly (*read_sched_clock)(void) = jiffy_sched_clock_read; -static inline u64 cyc_to_ns(u64 cyc, u32 mult, u32 shift) +static inline u64 notrace cyc_to_ns(u64 cyc, u32 mult, u32 shift) { return (cyc * mult) >> shift; } -static unsigned long long cyc_to_sched_clock(u32 cyc, u32 mask) +static unsigned long long notrace cyc_to_sched_clock(u32 cyc, u32 mask) { u64 epoch_ns; u32 epoch_cyc; @@ -113,11 +114,14 @@ void __init setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate) u64 res, wrap; char r_unit; + if (cd.rate > rate) + return; + BUG_ON(bits > 32); WARN_ON(!irqs_disabled()); - WARN_ON(read_sched_clock != jiffy_sched_clock_read); read_sched_clock = read; sched_clock_mask = (1 << bits) - 1; + cd.rate = rate; /* calculate the mult/shift to convert counter ticks to ns. */ clocks_calc_mult_shift(&cd.mult, &cd.shift, rate, NSEC_PER_SEC, 0); @@ -161,12 +165,19 @@ void __init setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate) pr_debug("Registered %pF as sched_clock source\n", read); } -unsigned long long notrace sched_clock(void) +static unsigned long long notrace sched_clock_32(void) { u32 cyc = read_sched_clock(); return cyc_to_sched_clock(cyc, sched_clock_mask); } +unsigned long long __read_mostly (*sched_clock_func)(void) = sched_clock_32; + +unsigned long long notrace sched_clock(void) +{ + return sched_clock_func(); +} + void __init sched_clock_postinit(void) { /* diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index d343a6c3a6d1..728007c4a2b7 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -56,7 +56,6 @@ #include <asm/virt.h> #include "atags.h" -#include "tcm.h" #if defined(CONFIG_FPE_NWFPE) || defined(CONFIG_FPE_FASTFPE) @@ -291,10 +290,10 @@ static int cpu_has_aliasing_icache(unsigned int arch) static void __init cacheid_init(void) { - unsigned int cachetype = read_cpuid_cachetype(); unsigned int arch = cpu_architecture(); if (arch >= CPU_ARCH_ARMv6) { + unsigned int cachetype = read_cpuid_cachetype(); if ((cachetype & (7 << 29)) == 4 << 29) { /* ARMv7 register format */ arch = CPU_ARCH_ARMv7; @@ -390,7 +389,7 @@ static void __init feat_v6_fixup(void) * * cpu_init sets up the per-CPU stacks. */ -void cpu_init(void) +void notrace cpu_init(void) { unsigned int cpu = smp_processor_id(); struct stack *stk = &stacks[cpu]; @@ -798,8 +797,6 @@ void __init setup_arch(char **cmdline_p) reserve_crashkernel(); - tcm_init(); - #ifdef CONFIG_MULTI_IRQ_HANDLER handle_arch_irq = mdesc->handle_irq; #endif diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 1f2ccccaf009..47ab90563bf4 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -211,6 +211,13 @@ void __cpuinit __cpu_die(unsigned int cpu) } printk(KERN_NOTICE "CPU%u: shutdown\n", cpu); + /* + * platform_cpu_kill() is generally expected to do the powering off + * and/or cutting of clocks to the dying CPU. Optionally, this may + * be done by the CPU which is dying in preference to supporting + * this call, but that means there is _no_ synchronisation between + * the requesting CPU and the dying CPU actually losing power. + */ if (!platform_cpu_kill(cpu)) printk("CPU%u: unable to kill\n", cpu); } @@ -230,14 +237,41 @@ void __ref cpu_die(void) idle_task_exit(); local_irq_disable(); - mb(); - /* Tell __cpu_die() that this CPU is now safe to dispose of */ + /* + * Flush the data out of the L1 cache for this CPU. This must be + * before the completion to ensure that data is safely written out + * before platform_cpu_kill() gets called - which may disable + * *this* CPU and power down its cache. + */ + flush_cache_louis(); + + /* + * Tell __cpu_die() that this CPU is now safe to dispose of. Once + * this returns, power and/or clocks can be removed at any point + * from this CPU and its cache by platform_cpu_kill(). + */ RCU_NONIDLE(complete(&cpu_died)); /* - * actual CPU shutdown procedure is at least platform (if not - * CPU) specific. + * Ensure that the cache lines associated with that completion are + * written out. This covers the case where _this_ CPU is doing the + * powering down, to ensure that the completion is visible to the + * CPU waiting for this one. + */ + flush_cache_louis(); + + /* + * The actual CPU shutdown procedure is at least platform (if not + * CPU) specific. This may remove power, or it may simply spin. + * + * Platforms are generally expected *NOT* to return from this call, + * although there are some which do because they have no way to + * power down the CPU. These platforms are the _only_ reason we + * have a return path which uses the fragment of assembly below. + * + * The return path should not be used for platforms which can + * power off the CPU. */ if (smp_ops.cpu_die) smp_ops.cpu_die(cpu); @@ -336,7 +370,7 @@ asmlinkage void __cpuinit secondary_start_kernel(void) /* * OK, it's off to the idle thread for us */ - cpu_idle(); + cpu_startup_entry(CPUHP_ONLINE); } void __init smp_cpus_done(unsigned int max_cpus) diff --git a/arch/arm/kernel/smp_scu.c b/arch/arm/kernel/smp_scu.c index 45eac87ed66a..5bc1a63284e3 100644 --- a/arch/arm/kernel/smp_scu.c +++ b/arch/arm/kernel/smp_scu.c @@ -41,7 +41,7 @@ void scu_enable(void __iomem *scu_base) #ifdef CONFIG_ARM_ERRATA_764369 /* Cortex-A9 only */ - if ((read_cpuid(CPUID_ID) & 0xff0ffff0) == 0x410fc090) { + if ((read_cpuid_id() & 0xff0ffff0) == 0x410fc090) { scu_ctrl = __raw_readl(scu_base + 0x30); if (!(scu_ctrl & 1)) __raw_writel(scu_ctrl | 0x1, scu_base + 0x30); diff --git a/arch/arm/kernel/smp_tlb.c b/arch/arm/kernel/smp_tlb.c index e82e1d248772..9a52a07aa40e 100644 --- a/arch/arm/kernel/smp_tlb.c +++ b/arch/arm/kernel/smp_tlb.c @@ -98,21 +98,21 @@ static void broadcast_tlb_a15_erratum(void) return; dummy_flush_tlb_a15_erratum(); - smp_call_function_many(cpu_online_mask, ipi_flush_tlb_a15_erratum, - NULL, 1); + smp_call_function(ipi_flush_tlb_a15_erratum, NULL, 1); } static void broadcast_tlb_mm_a15_erratum(struct mm_struct *mm) { - int cpu; + int cpu, this_cpu; cpumask_t mask = { CPU_BITS_NONE }; if (!erratum_a15_798181()) return; dummy_flush_tlb_a15_erratum(); + this_cpu = get_cpu(); for_each_online_cpu(cpu) { - if (cpu == smp_processor_id()) + if (cpu == this_cpu) continue; /* * We only need to send an IPI if the other CPUs are running @@ -127,6 +127,7 @@ static void broadcast_tlb_mm_a15_erratum(struct mm_struct *mm) cpumask_set_cpu(cpu, &mask); } smp_call_function_many(&mask, ipi_flush_tlb_a15_erratum, NULL, 1); + put_cpu(); } void flush_tlb_all(void) diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index 3f2565037480..90525d9d290b 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -362,25 +362,13 @@ int __init twd_local_timer_register(struct twd_local_timer *tlt) } #ifdef CONFIG_OF -const static struct of_device_id twd_of_match[] __initconst = { - { .compatible = "arm,cortex-a9-twd-timer", }, - { .compatible = "arm,cortex-a5-twd-timer", }, - { .compatible = "arm,arm11mp-twd-timer", }, - { }, -}; - -void __init twd_local_timer_of_register(void) +static void __init twd_local_timer_of_register(struct device_node *np) { - struct device_node *np; int err; if (!is_smp() || !setup_max_cpus) return; - np = of_find_matching_node(NULL, twd_of_match); - if (!np) - return; - twd_ppi = irq_of_parse_and_map(np, 0); if (!twd_ppi) { err = -EINVAL; @@ -398,4 +386,7 @@ void __init twd_local_timer_of_register(void) out: WARN(err, "twd_local_timer_of_register failed (%d)\n", err); } +CLOCKSOURCE_OF_DECLARE(arm_twd_a9, "arm,cortex-a9-twd-timer", twd_local_timer_of_register); +CLOCKSOURCE_OF_DECLARE(arm_twd_a5, "arm,cortex-a5-twd-timer", twd_local_timer_of_register); +CLOCKSOURCE_OF_DECLARE(arm_twd_11mp, "arm,arm11mp-twd-timer", twd_local_timer_of_register); #endif diff --git a/arch/arm/kernel/swp_emulate.c b/arch/arm/kernel/swp_emulate.c index ab1017bd1667..b1b89882b113 100644 --- a/arch/arm/kernel/swp_emulate.c +++ b/arch/arm/kernel/swp_emulate.c @@ -21,6 +21,7 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/proc_fs.h> +#include <linux/seq_file.h> #include <linux/sched.h> #include <linux/syscalls.h> #include <linux/perf_event.h> @@ -79,27 +80,27 @@ static unsigned long abtcounter; static pid_t previous_pid; #ifdef CONFIG_PROC_FS -static int proc_read_status(char *page, char **start, off_t off, int count, - int *eof, void *data) +static int proc_status_show(struct seq_file *m, void *v) { - char *p = page; - int len; - - p += sprintf(p, "Emulated SWP:\t\t%lu\n", swpcounter); - p += sprintf(p, "Emulated SWPB:\t\t%lu\n", swpbcounter); - p += sprintf(p, "Aborted SWP{B}:\t\t%lu\n", abtcounter); + seq_printf(m, "Emulated SWP:\t\t%lu\n", swpcounter); + seq_printf(m, "Emulated SWPB:\t\t%lu\n", swpbcounter); + seq_printf(m, "Aborted SWP{B}:\t\t%lu\n", abtcounter); if (previous_pid != 0) - p += sprintf(p, "Last process:\t\t%d\n", previous_pid); - - len = (p - page) - off; - if (len < 0) - len = 0; - - *eof = (len <= count) ? 1 : 0; - *start = page + off; + seq_printf(m, "Last process:\t\t%d\n", previous_pid); + return 0; +} - return len; +static int proc_status_open(struct inode *inode, struct file *file) +{ + return single_open(file, proc_status_show, PDE_DATA(inode)); } + +static const struct file_operations proc_status_fops = { + .open = proc_status_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; #endif /* @@ -266,14 +267,8 @@ static struct undef_hook swp_hook = { static int __init swp_emulation_init(void) { #ifdef CONFIG_PROC_FS - struct proc_dir_entry *res; - - res = create_proc_entry("cpu/swp_emulation", S_IRUGO, NULL); - - if (!res) + if (!proc_create("cpu/swp_emulation", S_IRUGO, NULL, &proc_status_fops)) return -ENOMEM; - - res->read_proc = proc_read_status; #endif /* CONFIG_PROC_FS */ printk(KERN_NOTICE "Registering SWP/SWPB emulation handler\n"); diff --git a/arch/arm/kernel/tcm.c b/arch/arm/kernel/tcm.c index 30ae6bb4a310..f50f19e5c138 100644 --- a/arch/arm/kernel/tcm.c +++ b/arch/arm/kernel/tcm.c @@ -17,7 +17,6 @@ #include <asm/mach/map.h> #include <asm/memory.h> #include <asm/system_info.h> -#include "tcm.h" static struct gen_pool *tcm_pool; static bool dtcm_present; diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c index 955d92d265e5..abff4e9aaee0 100644 --- a/arch/arm/kernel/time.c +++ b/arch/arm/kernel/time.c @@ -22,6 +22,7 @@ #include <linux/errno.h> #include <linux/profile.h> #include <linux/timer.h> +#include <linux/clocksource.h> #include <linux/irq.h> #include <asm/thread_info.h> @@ -115,6 +116,10 @@ int __init register_persistent_clock(clock_access_fn read_boot, void __init time_init(void) { - machine_desc->init_time(); + if (machine_desc->init_time) + machine_desc->init_time(); + else + clocksource_of_init(); + sched_clock_postinit(); } diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c index 79282ebcd939..f10316b4ecdc 100644 --- a/arch/arm/kernel/topology.c +++ b/arch/arm/kernel/topology.c @@ -100,7 +100,7 @@ static void __init parse_dt_topology(void) int alloc_size, cpu = 0; alloc_size = nr_cpu_ids * sizeof(struct cpu_capacity); - cpu_capacity = (struct cpu_capacity *)kzalloc(alloc_size, GFP_NOWAIT); + cpu_capacity = kzalloc(alloc_size, GFP_NOWAIT); while ((cn = of_find_node_by_type(cn, "cpu"))) { const u32 *rate, *reg; diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 1c089119b2d7..18b32e8e4497 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -204,13 +204,6 @@ static void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk) } #endif -void dump_stack(void) -{ - dump_backtrace(NULL, NULL); -} - -EXPORT_SYMBOL(dump_stack); - void show_stack(struct task_struct *tsk, unsigned long *sp) { dump_backtrace(NULL, tsk); diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index b571484e9f03..a871b8e00fca 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -20,7 +20,7 @@ VMLINUX_SYMBOL(__idmap_text_start) = .; \ *(.idmap.text) \ VMLINUX_SYMBOL(__idmap_text_end) = .; \ - ALIGN_FUNCTION(); \ + . = ALIGN(32); \ VMLINUX_SYMBOL(__hyp_idmap_text_start) = .; \ *(.hyp.idmap.text) \ VMLINUX_SYMBOL(__hyp_idmap_text_end) = .; @@ -315,3 +315,8 @@ SECTIONS */ ASSERT((__proc_info_end - __proc_info_begin), "missing CPU support") ASSERT((__arch_info_end - __arch_info_begin), "no machine record defined") +/* + * The HYP init code can't be more than a page long. + * The above comment applies as well. + */ +ASSERT(((__hyp_idmap_text_end - __hyp_idmap_text_start) <= PAGE_SIZE), "HYP init code too big") diff --git a/arch/arm/kvm/Kconfig b/arch/arm/kvm/Kconfig index 49dd64e579c2..370e1a8af6ac 100644 --- a/arch/arm/kvm/Kconfig +++ b/arch/arm/kvm/Kconfig @@ -41,9 +41,9 @@ config KVM_ARM_HOST Provides host support for ARM processors. config KVM_ARM_MAX_VCPUS - int "Number maximum supported virtual CPUs per VM" - depends on KVM_ARM_HOST - default 4 + int "Number maximum supported virtual CPUs per VM" if KVM_ARM_HOST + default 4 if KVM_ARM_HOST + default 0 help Static number of max supported virtual CPUs per VM. diff --git a/arch/arm/kvm/Makefile b/arch/arm/kvm/Makefile index fc96ce6f2357..53c5ed83d16f 100644 --- a/arch/arm/kvm/Makefile +++ b/arch/arm/kvm/Makefile @@ -17,7 +17,7 @@ AFLAGS_interrupts.o := -Wa,-march=armv7-a$(plus_virt) kvm-arm-y = $(addprefix ../../../virt/kvm/, kvm_main.o coalesced_mmio.o) obj-y += kvm-arm.o init.o interrupts.o -obj-y += arm.o guest.o mmu.o emulate.o reset.o -obj-y += coproc.o coproc_a15.o mmio.o psci.o +obj-y += arm.o handle_exit.o guest.o mmu.o emulate.o reset.o +obj-y += coproc.o coproc_a15.o mmio.o psci.o perf.o obj-$(CONFIG_KVM_ARM_VGIC) += vgic.o obj-$(CONFIG_KVM_ARM_TIMER) += arch_timer.o diff --git a/arch/arm/kvm/arch_timer.c b/arch/arm/kvm/arch_timer.c index 6ac938d46297..c55b6089e923 100644 --- a/arch/arm/kvm/arch_timer.c +++ b/arch/arm/kvm/arch_timer.c @@ -22,6 +22,7 @@ #include <linux/kvm_host.h> #include <linux/interrupt.h> +#include <clocksource/arm_arch_timer.h> #include <asm/arch_timer.h> #include <asm/kvm_vgic.h> @@ -64,7 +65,7 @@ static void kvm_timer_inject_irq(struct kvm_vcpu *vcpu) { struct arch_timer_cpu *timer = &vcpu->arch.timer_cpu; - timer->cntv_ctl |= 1 << 1; /* Mask the interrupt in the guest */ + timer->cntv_ctl |= ARCH_TIMER_CTRL_IT_MASK; kvm_vgic_inject_irq(vcpu->kvm, vcpu->vcpu_id, vcpu->arch.timer_cpu.irq->irq, vcpu->arch.timer_cpu.irq->level); @@ -133,8 +134,8 @@ void kvm_timer_sync_hwstate(struct kvm_vcpu *vcpu) cycle_t cval, now; u64 ns; - /* Check if the timer is enabled and unmasked first */ - if ((timer->cntv_ctl & 3) != 1) + if ((timer->cntv_ctl & ARCH_TIMER_CTRL_IT_MASK) || + !(timer->cntv_ctl & ARCH_TIMER_CTRL_ENABLE)) return; cval = timer->cntv_cval; diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c index 5a936988eb24..37d216d814cd 100644 --- a/arch/arm/kvm/arm.c +++ b/arch/arm/kvm/arm.c @@ -16,6 +16,7 @@ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */ +#include <linux/cpu.h> #include <linux/errno.h> #include <linux/err.h> #include <linux/kvm_host.h> @@ -30,11 +31,9 @@ #define CREATE_TRACE_POINTS #include "trace.h" -#include <asm/unified.h> #include <asm/uaccess.h> #include <asm/ptrace.h> #include <asm/mman.h> -#include <asm/cputype.h> #include <asm/tlbflush.h> #include <asm/cacheflush.h> #include <asm/virt.h> @@ -44,14 +43,13 @@ #include <asm/kvm_emulate.h> #include <asm/kvm_coproc.h> #include <asm/kvm_psci.h> -#include <asm/opcodes.h> #ifdef REQUIRES_VIRT __asm__(".arch_extension virt"); #endif static DEFINE_PER_CPU(unsigned long, kvm_arm_hyp_stack_page); -static struct vfp_hard_struct __percpu *kvm_host_vfp_state; +static kvm_cpu_context_t __percpu *kvm_host_cpu_state; static unsigned long hyp_default_vectors; /* Per-CPU variable containing the currently running vcpu. */ @@ -201,6 +199,7 @@ int kvm_dev_ioctl_check_extension(long ext) break; case KVM_CAP_ARM_SET_DEVICE_ADDR: r = 1; + break; case KVM_CAP_NR_VCPUS: r = num_online_cpus(); break; @@ -208,7 +207,7 @@ int kvm_dev_ioctl_check_extension(long ext) r = KVM_MAX_VCPUS; break; default: - r = 0; + r = kvm_arch_dev_ioctl_check_extension(ext); break; } return r; @@ -220,27 +219,18 @@ long kvm_arch_dev_ioctl(struct file *filp, return -EINVAL; } -int kvm_arch_set_memory_region(struct kvm *kvm, - struct kvm_userspace_memory_region *mem, - struct kvm_memory_slot old, - int user_alloc) -{ - return 0; -} - int kvm_arch_prepare_memory_region(struct kvm *kvm, struct kvm_memory_slot *memslot, - struct kvm_memory_slot old, struct kvm_userspace_memory_region *mem, - bool user_alloc) + enum kvm_mr_change change) { return 0; } void kvm_arch_commit_memory_region(struct kvm *kvm, struct kvm_userspace_memory_region *mem, - struct kvm_memory_slot old, - bool user_alloc) + const struct kvm_memory_slot *old, + enum kvm_mr_change change) { } @@ -303,22 +293,6 @@ int kvm_cpu_has_pending_timer(struct kvm_vcpu *vcpu) return 0; } -int __attribute_const__ kvm_target_cpu(void) -{ - unsigned long implementor = read_cpuid_implementor(); - unsigned long part_number = read_cpuid_part_number(); - - if (implementor != ARM_CPU_IMP_ARM) - return -EINVAL; - - switch (part_number) { - case ARM_CPU_PART_CORTEX_A15: - return KVM_ARM_TARGET_CORTEX_A15; - default: - return -EINVAL; - } -} - int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu) { int ret; @@ -344,7 +318,7 @@ void kvm_arch_vcpu_uninit(struct kvm_vcpu *vcpu) void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu) { vcpu->cpu = cpu; - vcpu->arch.vfp_host = this_cpu_ptr(kvm_host_vfp_state); + vcpu->arch.host_cpu_context = this_cpu_ptr(kvm_host_cpu_state); /* * Check whether this vcpu requires the cache to be flushed on @@ -481,163 +455,6 @@ static void update_vttbr(struct kvm *kvm) spin_unlock(&kvm_vmid_lock); } -static int handle_svc_hyp(struct kvm_vcpu *vcpu, struct kvm_run *run) -{ - /* SVC called from Hyp mode should never get here */ - kvm_debug("SVC called from Hyp mode shouldn't go here\n"); - BUG(); - return -EINVAL; /* Squash warning */ -} - -static int handle_hvc(struct kvm_vcpu *vcpu, struct kvm_run *run) -{ - trace_kvm_hvc(*vcpu_pc(vcpu), *vcpu_reg(vcpu, 0), - vcpu->arch.hsr & HSR_HVC_IMM_MASK); - - if (kvm_psci_call(vcpu)) - return 1; - - kvm_inject_undefined(vcpu); - return 1; -} - -static int handle_smc(struct kvm_vcpu *vcpu, struct kvm_run *run) -{ - if (kvm_psci_call(vcpu)) - return 1; - - kvm_inject_undefined(vcpu); - return 1; -} - -static int handle_pabt_hyp(struct kvm_vcpu *vcpu, struct kvm_run *run) -{ - /* The hypervisor should never cause aborts */ - kvm_err("Prefetch Abort taken from Hyp mode at %#08x (HSR: %#08x)\n", - vcpu->arch.hxfar, vcpu->arch.hsr); - return -EFAULT; -} - -static int handle_dabt_hyp(struct kvm_vcpu *vcpu, struct kvm_run *run) -{ - /* This is either an error in the ws. code or an external abort */ - kvm_err("Data Abort taken from Hyp mode at %#08x (HSR: %#08x)\n", - vcpu->arch.hxfar, vcpu->arch.hsr); - return -EFAULT; -} - -typedef int (*exit_handle_fn)(struct kvm_vcpu *, struct kvm_run *); -static exit_handle_fn arm_exit_handlers[] = { - [HSR_EC_WFI] = kvm_handle_wfi, - [HSR_EC_CP15_32] = kvm_handle_cp15_32, - [HSR_EC_CP15_64] = kvm_handle_cp15_64, - [HSR_EC_CP14_MR] = kvm_handle_cp14_access, - [HSR_EC_CP14_LS] = kvm_handle_cp14_load_store, - [HSR_EC_CP14_64] = kvm_handle_cp14_access, - [HSR_EC_CP_0_13] = kvm_handle_cp_0_13_access, - [HSR_EC_CP10_ID] = kvm_handle_cp10_id, - [HSR_EC_SVC_HYP] = handle_svc_hyp, - [HSR_EC_HVC] = handle_hvc, - [HSR_EC_SMC] = handle_smc, - [HSR_EC_IABT] = kvm_handle_guest_abort, - [HSR_EC_IABT_HYP] = handle_pabt_hyp, - [HSR_EC_DABT] = kvm_handle_guest_abort, - [HSR_EC_DABT_HYP] = handle_dabt_hyp, -}; - -/* - * A conditional instruction is allowed to trap, even though it - * wouldn't be executed. So let's re-implement the hardware, in - * software! - */ -static bool kvm_condition_valid(struct kvm_vcpu *vcpu) -{ - unsigned long cpsr, cond, insn; - - /* - * Exception Code 0 can only happen if we set HCR.TGE to 1, to - * catch undefined instructions, and then we won't get past - * the arm_exit_handlers test anyway. - */ - BUG_ON(((vcpu->arch.hsr & HSR_EC) >> HSR_EC_SHIFT) == 0); - - /* Top two bits non-zero? Unconditional. */ - if (vcpu->arch.hsr >> 30) - return true; - - cpsr = *vcpu_cpsr(vcpu); - - /* Is condition field valid? */ - if ((vcpu->arch.hsr & HSR_CV) >> HSR_CV_SHIFT) - cond = (vcpu->arch.hsr & HSR_COND) >> HSR_COND_SHIFT; - else { - /* This can happen in Thumb mode: examine IT state. */ - unsigned long it; - - it = ((cpsr >> 8) & 0xFC) | ((cpsr >> 25) & 0x3); - - /* it == 0 => unconditional. */ - if (it == 0) - return true; - - /* The cond for this insn works out as the top 4 bits. */ - cond = (it >> 4); - } - - /* Shift makes it look like an ARM-mode instruction */ - insn = cond << 28; - return arm_check_condition(insn, cpsr) != ARM_OPCODE_CONDTEST_FAIL; -} - -/* - * Return > 0 to return to guest, < 0 on error, 0 (and set exit_reason) on - * proper exit to QEMU. - */ -static int handle_exit(struct kvm_vcpu *vcpu, struct kvm_run *run, - int exception_index) -{ - unsigned long hsr_ec; - - switch (exception_index) { - case ARM_EXCEPTION_IRQ: - return 1; - case ARM_EXCEPTION_UNDEFINED: - kvm_err("Undefined exception in Hyp mode at: %#08x\n", - vcpu->arch.hyp_pc); - BUG(); - panic("KVM: Hypervisor undefined exception!\n"); - case ARM_EXCEPTION_DATA_ABORT: - case ARM_EXCEPTION_PREF_ABORT: - case ARM_EXCEPTION_HVC: - hsr_ec = (vcpu->arch.hsr & HSR_EC) >> HSR_EC_SHIFT; - - if (hsr_ec >= ARRAY_SIZE(arm_exit_handlers) - || !arm_exit_handlers[hsr_ec]) { - kvm_err("Unkown exception class: %#08lx, " - "hsr: %#08x\n", hsr_ec, - (unsigned int)vcpu->arch.hsr); - BUG(); - } - - /* - * See ARM ARM B1.14.1: "Hyp traps on instructions - * that fail their condition code check" - */ - if (!kvm_condition_valid(vcpu)) { - bool is_wide = vcpu->arch.hsr & HSR_IL; - kvm_skip_instr(vcpu, is_wide); - return 1; - } - - return arm_exit_handlers[hsr_ec](vcpu, run); - default: - kvm_pr_unimpl("Unsupported exception type: %d", - exception_index); - run->exit_reason = KVM_EXIT_INTERNAL_ERROR; - return 0; - } -} - static int kvm_vcpu_first_run_init(struct kvm_vcpu *vcpu) { if (likely(vcpu->arch.has_run_once)) @@ -814,7 +631,8 @@ static int vcpu_interrupt_line(struct kvm_vcpu *vcpu, int number, bool level) return 0; } -int kvm_vm_ioctl_irq_line(struct kvm *kvm, struct kvm_irq_level *irq_level) +int kvm_vm_ioctl_irq_line(struct kvm *kvm, struct kvm_irq_level *irq_level, + bool line_status) { u32 irq = irq_level->irq; unsigned int irq_type, vcpu_idx, irq_num; @@ -969,40 +787,48 @@ long kvm_arch_vm_ioctl(struct file *filp, } } -static void cpu_init_hyp_mode(void *vector) +static void cpu_init_hyp_mode(void *dummy) { + unsigned long long boot_pgd_ptr; unsigned long long pgd_ptr; - unsigned long pgd_low, pgd_high; unsigned long hyp_stack_ptr; unsigned long stack_page; unsigned long vector_ptr; /* Switch from the HYP stub to our own HYP init vector */ - __hyp_set_vectors((unsigned long)vector); + __hyp_set_vectors(kvm_get_idmap_vector()); + boot_pgd_ptr = (unsigned long long)kvm_mmu_get_boot_httbr(); pgd_ptr = (unsigned long long)kvm_mmu_get_httbr(); - pgd_low = (pgd_ptr & ((1ULL << 32) - 1)); - pgd_high = (pgd_ptr >> 32ULL); stack_page = __get_cpu_var(kvm_arm_hyp_stack_page); hyp_stack_ptr = stack_page + PAGE_SIZE; vector_ptr = (unsigned long)__kvm_hyp_vector; - /* - * Call initialization code, and switch to the full blown - * HYP code. The init code doesn't need to preserve these registers as - * r1-r3 and r12 are already callee save according to the AAPCS. - * Note that we slightly misuse the prototype by casing the pgd_low to - * a void *. - */ - kvm_call_hyp((void *)pgd_low, pgd_high, hyp_stack_ptr, vector_ptr); + __cpu_init_hyp_mode(boot_pgd_ptr, pgd_ptr, hyp_stack_ptr, vector_ptr); +} + +static int hyp_init_cpu_notify(struct notifier_block *self, + unsigned long action, void *cpu) +{ + switch (action) { + case CPU_STARTING: + case CPU_STARTING_FROZEN: + cpu_init_hyp_mode(NULL); + break; + } + + return NOTIFY_OK; } +static struct notifier_block hyp_init_cpu_nb = { + .notifier_call = hyp_init_cpu_notify, +}; + /** * Inits Hyp-mode on all online CPUs */ static int init_hyp_mode(void) { - phys_addr_t init_phys_addr; int cpu; int err = 0; @@ -1035,24 +861,6 @@ static int init_hyp_mode(void) } /* - * Execute the init code on each CPU. - * - * Note: The stack is not mapped yet, so don't do anything else than - * initializing the hypervisor mode on each CPU using a local stack - * space for temporary storage. - */ - init_phys_addr = virt_to_phys(__kvm_hyp_init); - for_each_online_cpu(cpu) { - smp_call_function_single(cpu, cpu_init_hyp_mode, - (void *)(long)init_phys_addr, 1); - } - - /* - * Unmap the identity mapping - */ - kvm_clear_hyp_idmap(); - - /* * Map the Hyp-code called directly from the host */ err = create_hyp_mappings(__kvm_hyp_code_start, __kvm_hyp_code_end); @@ -1075,33 +883,38 @@ static int init_hyp_mode(void) } /* - * Map the host VFP structures + * Map the host CPU structures */ - kvm_host_vfp_state = alloc_percpu(struct vfp_hard_struct); - if (!kvm_host_vfp_state) { + kvm_host_cpu_state = alloc_percpu(kvm_cpu_context_t); + if (!kvm_host_cpu_state) { err = -ENOMEM; - kvm_err("Cannot allocate host VFP state\n"); + kvm_err("Cannot allocate host CPU state\n"); goto out_free_mappings; } for_each_possible_cpu(cpu) { - struct vfp_hard_struct *vfp; + kvm_cpu_context_t *cpu_ctxt; - vfp = per_cpu_ptr(kvm_host_vfp_state, cpu); - err = create_hyp_mappings(vfp, vfp + 1); + cpu_ctxt = per_cpu_ptr(kvm_host_cpu_state, cpu); + err = create_hyp_mappings(cpu_ctxt, cpu_ctxt + 1); if (err) { - kvm_err("Cannot map host VFP state: %d\n", err); - goto out_free_vfp; + kvm_err("Cannot map host CPU state: %d\n", err); + goto out_free_context; } } /* + * Execute the init code on each CPU. + */ + on_each_cpu(cpu_init_hyp_mode, NULL, 1); + + /* * Init HYP view of VGIC */ err = kvm_vgic_hyp_init(); if (err) - goto out_free_vfp; + goto out_free_context; #ifdef CONFIG_KVM_ARM_VGIC vgic_present = true; @@ -1114,12 +927,19 @@ static int init_hyp_mode(void) if (err) goto out_free_mappings; +#ifndef CONFIG_HOTPLUG_CPU + free_boot_hyp_pgd(); +#endif + + kvm_perf_init(); + kvm_info("Hyp mode initialized successfully\n"); + return 0; -out_free_vfp: - free_percpu(kvm_host_vfp_state); +out_free_context: + free_percpu(kvm_host_cpu_state); out_free_mappings: - free_hyp_pmds(); + free_hyp_pgds(); out_free_stack_pages: for_each_possible_cpu(cpu) free_page(per_cpu(kvm_arm_hyp_stack_page, cpu)); @@ -1128,27 +948,42 @@ out_err: return err; } +static void check_kvm_target_cpu(void *ret) +{ + *(int *)ret = kvm_target_cpu(); +} + /** * Initialize Hyp-mode and memory mappings on all CPUs. */ int kvm_arch_init(void *opaque) { int err; + int ret, cpu; if (!is_hyp_mode_available()) { kvm_err("HYP mode not available\n"); return -ENODEV; } - if (kvm_target_cpu() < 0) { - kvm_err("Target CPU not supported!\n"); - return -ENODEV; + for_each_online_cpu(cpu) { + smp_call_function_single(cpu, check_kvm_target_cpu, &ret, 1); + if (ret < 0) { + kvm_err("Error, CPU %d not supported!\n", cpu); + return -ENODEV; + } } err = init_hyp_mode(); if (err) goto out_err; + err = register_cpu_notifier(&hyp_init_cpu_nb); + if (err) { + kvm_err("Cannot register HYP init CPU notifier (%d)\n", err); + goto out_err; + } + kvm_coproc_table_init(); return 0; out_err: @@ -1158,6 +993,7 @@ out_err: /* NOP: Compiling as a module not supported */ void kvm_arch_exit(void) { + kvm_perf_teardown(); } static int arm_init(void) diff --git a/arch/arm/kvm/coproc.c b/arch/arm/kvm/coproc.c index 4ea9a982269c..8eea97be1ed5 100644 --- a/arch/arm/kvm/coproc.c +++ b/arch/arm/kvm/coproc.c @@ -76,14 +76,14 @@ static bool access_dcsw(struct kvm_vcpu *vcpu, const struct coproc_params *p, const struct coproc_reg *r) { - u32 val; + unsigned long val; int cpu; - cpu = get_cpu(); - if (!p->is_write) return read_from_write_only(vcpu, p); + cpu = get_cpu(); + cpumask_setall(&vcpu->arch.require_dcache_flush); cpumask_clear_cpu(cpu, &vcpu->arch.require_dcache_flush); @@ -293,12 +293,12 @@ static int emulate_cp15(struct kvm_vcpu *vcpu, if (likely(r->access(vcpu, params, r))) { /* Skip instruction, since it was emulated */ - kvm_skip_instr(vcpu, (vcpu->arch.hsr >> 25) & 1); + kvm_skip_instr(vcpu, kvm_vcpu_trap_il_is32bit(vcpu)); return 1; } /* If access function fails, it should complain. */ } else { - kvm_err("Unsupported guest CP15 access at: %08x\n", + kvm_err("Unsupported guest CP15 access at: %08lx\n", *vcpu_pc(vcpu)); print_cp_instr(params); } @@ -315,14 +315,14 @@ int kvm_handle_cp15_64(struct kvm_vcpu *vcpu, struct kvm_run *run) { struct coproc_params params; - params.CRm = (vcpu->arch.hsr >> 1) & 0xf; - params.Rt1 = (vcpu->arch.hsr >> 5) & 0xf; - params.is_write = ((vcpu->arch.hsr & 1) == 0); + params.CRm = (kvm_vcpu_get_hsr(vcpu) >> 1) & 0xf; + params.Rt1 = (kvm_vcpu_get_hsr(vcpu) >> 5) & 0xf; + params.is_write = ((kvm_vcpu_get_hsr(vcpu) & 1) == 0); params.is_64bit = true; - params.Op1 = (vcpu->arch.hsr >> 16) & 0xf; + params.Op1 = (kvm_vcpu_get_hsr(vcpu) >> 16) & 0xf; params.Op2 = 0; - params.Rt2 = (vcpu->arch.hsr >> 10) & 0xf; + params.Rt2 = (kvm_vcpu_get_hsr(vcpu) >> 10) & 0xf; params.CRn = 0; return emulate_cp15(vcpu, ¶ms); @@ -347,14 +347,14 @@ int kvm_handle_cp15_32(struct kvm_vcpu *vcpu, struct kvm_run *run) { struct coproc_params params; - params.CRm = (vcpu->arch.hsr >> 1) & 0xf; - params.Rt1 = (vcpu->arch.hsr >> 5) & 0xf; - params.is_write = ((vcpu->arch.hsr & 1) == 0); + params.CRm = (kvm_vcpu_get_hsr(vcpu) >> 1) & 0xf; + params.Rt1 = (kvm_vcpu_get_hsr(vcpu) >> 5) & 0xf; + params.is_write = ((kvm_vcpu_get_hsr(vcpu) & 1) == 0); params.is_64bit = false; - params.CRn = (vcpu->arch.hsr >> 10) & 0xf; - params.Op1 = (vcpu->arch.hsr >> 14) & 0x7; - params.Op2 = (vcpu->arch.hsr >> 17) & 0x7; + params.CRn = (kvm_vcpu_get_hsr(vcpu) >> 10) & 0xf; + params.Op1 = (kvm_vcpu_get_hsr(vcpu) >> 14) & 0x7; + params.Op2 = (kvm_vcpu_get_hsr(vcpu) >> 17) & 0x7; params.Rt2 = 0; return emulate_cp15(vcpu, ¶ms); diff --git a/arch/arm/kvm/coproc.h b/arch/arm/kvm/coproc.h index 992adfafa2ff..b7301d3e4799 100644 --- a/arch/arm/kvm/coproc.h +++ b/arch/arm/kvm/coproc.h @@ -84,7 +84,7 @@ static inline bool read_zero(struct kvm_vcpu *vcpu, static inline bool write_to_read_only(struct kvm_vcpu *vcpu, const struct coproc_params *params) { - kvm_debug("CP15 write to read-only register at: %08x\n", + kvm_debug("CP15 write to read-only register at: %08lx\n", *vcpu_pc(vcpu)); print_cp_instr(params); return false; @@ -93,7 +93,7 @@ static inline bool write_to_read_only(struct kvm_vcpu *vcpu, static inline bool read_from_write_only(struct kvm_vcpu *vcpu, const struct coproc_params *params) { - kvm_debug("CP15 read to write-only register at: %08x\n", + kvm_debug("CP15 read to write-only register at: %08lx\n", *vcpu_pc(vcpu)); print_cp_instr(params); return false; diff --git a/arch/arm/kvm/emulate.c b/arch/arm/kvm/emulate.c index d61450ac6665..bdede9e7da51 100644 --- a/arch/arm/kvm/emulate.c +++ b/arch/arm/kvm/emulate.c @@ -20,6 +20,7 @@ #include <linux/kvm_host.h> #include <asm/kvm_arm.h> #include <asm/kvm_emulate.h> +#include <asm/opcodes.h> #include <trace/events/kvm.h> #include "trace.h" @@ -109,10 +110,10 @@ static const unsigned long vcpu_reg_offsets[VCPU_NR_MODES][15] = { * Return a pointer to the register number valid in the current mode of * the virtual CPU. */ -u32 *vcpu_reg(struct kvm_vcpu *vcpu, u8 reg_num) +unsigned long *vcpu_reg(struct kvm_vcpu *vcpu, u8 reg_num) { - u32 *reg_array = (u32 *)&vcpu->arch.regs; - u32 mode = *vcpu_cpsr(vcpu) & MODE_MASK; + unsigned long *reg_array = (unsigned long *)&vcpu->arch.regs; + unsigned long mode = *vcpu_cpsr(vcpu) & MODE_MASK; switch (mode) { case USR_MODE...SVC_MODE: @@ -141,9 +142,9 @@ u32 *vcpu_reg(struct kvm_vcpu *vcpu, u8 reg_num) /* * Return the SPSR for the current mode of the virtual CPU. */ -u32 *vcpu_spsr(struct kvm_vcpu *vcpu) +unsigned long *vcpu_spsr(struct kvm_vcpu *vcpu) { - u32 mode = *vcpu_cpsr(vcpu) & MODE_MASK; + unsigned long mode = *vcpu_cpsr(vcpu) & MODE_MASK; switch (mode) { case SVC_MODE: return &vcpu->arch.regs.KVM_ARM_SVC_spsr; @@ -160,20 +161,48 @@ u32 *vcpu_spsr(struct kvm_vcpu *vcpu) } } -/** - * kvm_handle_wfi - handle a wait-for-interrupts instruction executed by a guest - * @vcpu: the vcpu pointer - * @run: the kvm_run structure pointer - * - * Simply sets the wait_for_interrupts flag on the vcpu structure, which will - * halt execution of world-switches and schedule other host processes until - * there is an incoming IRQ or FIQ to the VM. +/* + * A conditional instruction is allowed to trap, even though it + * wouldn't be executed. So let's re-implement the hardware, in + * software! */ -int kvm_handle_wfi(struct kvm_vcpu *vcpu, struct kvm_run *run) +bool kvm_condition_valid(struct kvm_vcpu *vcpu) { - trace_kvm_wfi(*vcpu_pc(vcpu)); - kvm_vcpu_block(vcpu); - return 1; + unsigned long cpsr, cond, insn; + + /* + * Exception Code 0 can only happen if we set HCR.TGE to 1, to + * catch undefined instructions, and then we won't get past + * the arm_exit_handlers test anyway. + */ + BUG_ON(!kvm_vcpu_trap_get_class(vcpu)); + + /* Top two bits non-zero? Unconditional. */ + if (kvm_vcpu_get_hsr(vcpu) >> 30) + return true; + + cpsr = *vcpu_cpsr(vcpu); + + /* Is condition field valid? */ + if ((kvm_vcpu_get_hsr(vcpu) & HSR_CV) >> HSR_CV_SHIFT) + cond = (kvm_vcpu_get_hsr(vcpu) & HSR_COND) >> HSR_COND_SHIFT; + else { + /* This can happen in Thumb mode: examine IT state. */ + unsigned long it; + + it = ((cpsr >> 8) & 0xFC) | ((cpsr >> 25) & 0x3); + + /* it == 0 => unconditional. */ + if (it == 0) + return true; + + /* The cond for this insn works out as the top 4 bits. */ + cond = (it >> 4); + } + + /* Shift makes it look like an ARM-mode instruction */ + insn = cond << 28; + return arm_check_condition(insn, cpsr) != ARM_OPCODE_CONDTEST_FAIL; } /** @@ -257,9 +286,9 @@ static u32 exc_vector_base(struct kvm_vcpu *vcpu) */ void kvm_inject_undefined(struct kvm_vcpu *vcpu) { - u32 new_lr_value; - u32 new_spsr_value; - u32 cpsr = *vcpu_cpsr(vcpu); + unsigned long new_lr_value; + unsigned long new_spsr_value; + unsigned long cpsr = *vcpu_cpsr(vcpu); u32 sctlr = vcpu->arch.cp15[c1_SCTLR]; bool is_thumb = (cpsr & PSR_T_BIT); u32 vect_offset = 4; @@ -291,9 +320,9 @@ void kvm_inject_undefined(struct kvm_vcpu *vcpu) */ static void inject_abt(struct kvm_vcpu *vcpu, bool is_pabt, unsigned long addr) { - u32 new_lr_value; - u32 new_spsr_value; - u32 cpsr = *vcpu_cpsr(vcpu); + unsigned long new_lr_value; + unsigned long new_spsr_value; + unsigned long cpsr = *vcpu_cpsr(vcpu); u32 sctlr = vcpu->arch.cp15[c1_SCTLR]; bool is_thumb = (cpsr & PSR_T_BIT); u32 vect_offset; diff --git a/arch/arm/kvm/guest.c b/arch/arm/kvm/guest.c index 2339d9609d36..152d03612181 100644 --- a/arch/arm/kvm/guest.c +++ b/arch/arm/kvm/guest.c @@ -22,6 +22,7 @@ #include <linux/module.h> #include <linux/vmalloc.h> #include <linux/fs.h> +#include <asm/cputype.h> #include <asm/uaccess.h> #include <asm/kvm.h> #include <asm/kvm_asm.h> @@ -180,6 +181,22 @@ int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu, return -EINVAL; } +int __attribute_const__ kvm_target_cpu(void) +{ + unsigned long implementor = read_cpuid_implementor(); + unsigned long part_number = read_cpuid_part_number(); + + if (implementor != ARM_CPU_IMP_ARM) + return -EINVAL; + + switch (part_number) { + case ARM_CPU_PART_CORTEX_A15: + return KVM_ARM_TARGET_CORTEX_A15; + default: + return -EINVAL; + } +} + int kvm_vcpu_set_target(struct kvm_vcpu *vcpu, const struct kvm_vcpu_init *init) { diff --git a/arch/arm/kvm/handle_exit.c b/arch/arm/kvm/handle_exit.c new file mode 100644 index 000000000000..3d74a0be47db --- /dev/null +++ b/arch/arm/kvm/handle_exit.c @@ -0,0 +1,164 @@ +/* + * Copyright (C) 2012 - Virtual Open Systems and Columbia University + * Author: Christoffer Dall <c.dall@virtualopensystems.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#include <linux/kvm.h> +#include <linux/kvm_host.h> +#include <asm/kvm_emulate.h> +#include <asm/kvm_coproc.h> +#include <asm/kvm_mmu.h> +#include <asm/kvm_psci.h> +#include <trace/events/kvm.h> + +#include "trace.h" + +#include "trace.h" + +typedef int (*exit_handle_fn)(struct kvm_vcpu *, struct kvm_run *); + +static int handle_svc_hyp(struct kvm_vcpu *vcpu, struct kvm_run *run) +{ + /* SVC called from Hyp mode should never get here */ + kvm_debug("SVC called from Hyp mode shouldn't go here\n"); + BUG(); + return -EINVAL; /* Squash warning */ +} + +static int handle_hvc(struct kvm_vcpu *vcpu, struct kvm_run *run) +{ + trace_kvm_hvc(*vcpu_pc(vcpu), *vcpu_reg(vcpu, 0), + kvm_vcpu_hvc_get_imm(vcpu)); + + if (kvm_psci_call(vcpu)) + return 1; + + kvm_inject_undefined(vcpu); + return 1; +} + +static int handle_smc(struct kvm_vcpu *vcpu, struct kvm_run *run) +{ + if (kvm_psci_call(vcpu)) + return 1; + + kvm_inject_undefined(vcpu); + return 1; +} + +static int handle_pabt_hyp(struct kvm_vcpu *vcpu, struct kvm_run *run) +{ + /* The hypervisor should never cause aborts */ + kvm_err("Prefetch Abort taken from Hyp mode at %#08lx (HSR: %#08x)\n", + kvm_vcpu_get_hfar(vcpu), kvm_vcpu_get_hsr(vcpu)); + return -EFAULT; +} + +static int handle_dabt_hyp(struct kvm_vcpu *vcpu, struct kvm_run *run) +{ + /* This is either an error in the ws. code or an external abort */ + kvm_err("Data Abort taken from Hyp mode at %#08lx (HSR: %#08x)\n", + kvm_vcpu_get_hfar(vcpu), kvm_vcpu_get_hsr(vcpu)); + return -EFAULT; +} + +/** + * kvm_handle_wfi - handle a wait-for-interrupts instruction executed by a guest + * @vcpu: the vcpu pointer + * @run: the kvm_run structure pointer + * + * Simply sets the wait_for_interrupts flag on the vcpu structure, which will + * halt execution of world-switches and schedule other host processes until + * there is an incoming IRQ or FIQ to the VM. + */ +static int kvm_handle_wfi(struct kvm_vcpu *vcpu, struct kvm_run *run) +{ + trace_kvm_wfi(*vcpu_pc(vcpu)); + kvm_vcpu_block(vcpu); + return 1; +} + +static exit_handle_fn arm_exit_handlers[] = { + [HSR_EC_WFI] = kvm_handle_wfi, + [HSR_EC_CP15_32] = kvm_handle_cp15_32, + [HSR_EC_CP15_64] = kvm_handle_cp15_64, + [HSR_EC_CP14_MR] = kvm_handle_cp14_access, + [HSR_EC_CP14_LS] = kvm_handle_cp14_load_store, + [HSR_EC_CP14_64] = kvm_handle_cp14_access, + [HSR_EC_CP_0_13] = kvm_handle_cp_0_13_access, + [HSR_EC_CP10_ID] = kvm_handle_cp10_id, + [HSR_EC_SVC_HYP] = handle_svc_hyp, + [HSR_EC_HVC] = handle_hvc, + [HSR_EC_SMC] = handle_smc, + [HSR_EC_IABT] = kvm_handle_guest_abort, + [HSR_EC_IABT_HYP] = handle_pabt_hyp, + [HSR_EC_DABT] = kvm_handle_guest_abort, + [HSR_EC_DABT_HYP] = handle_dabt_hyp, +}; + +static exit_handle_fn kvm_get_exit_handler(struct kvm_vcpu *vcpu) +{ + u8 hsr_ec = kvm_vcpu_trap_get_class(vcpu); + + if (hsr_ec >= ARRAY_SIZE(arm_exit_handlers) || + !arm_exit_handlers[hsr_ec]) { + kvm_err("Unknown exception class: hsr: %#08x\n", + (unsigned int)kvm_vcpu_get_hsr(vcpu)); + BUG(); + } + + return arm_exit_handlers[hsr_ec]; +} + +/* + * Return > 0 to return to guest, < 0 on error, 0 (and set exit_reason) on + * proper exit to userspace. + */ +int handle_exit(struct kvm_vcpu *vcpu, struct kvm_run *run, + int exception_index) +{ + exit_handle_fn exit_handler; + + switch (exception_index) { + case ARM_EXCEPTION_IRQ: + return 1; + case ARM_EXCEPTION_UNDEFINED: + kvm_err("Undefined exception in Hyp mode at: %#08lx\n", + kvm_vcpu_get_hyp_pc(vcpu)); + BUG(); + panic("KVM: Hypervisor undefined exception!\n"); + case ARM_EXCEPTION_DATA_ABORT: + case ARM_EXCEPTION_PREF_ABORT: + case ARM_EXCEPTION_HVC: + /* + * See ARM ARM B1.14.1: "Hyp traps on instructions + * that fail their condition code check" + */ + if (!kvm_condition_valid(vcpu)) { + kvm_skip_instr(vcpu, kvm_vcpu_trap_il_is32bit(vcpu)); + return 1; + } + + exit_handler = kvm_get_exit_handler(vcpu); + + return exit_handler(vcpu, run); + default: + kvm_pr_unimpl("Unsupported exception type: %d", + exception_index); + run->exit_reason = KVM_EXIT_INTERNAL_ERROR; + return 0; + } +} diff --git a/arch/arm/kvm/init.S b/arch/arm/kvm/init.S index 9f37a79b880b..f048338135f7 100644 --- a/arch/arm/kvm/init.S +++ b/arch/arm/kvm/init.S @@ -21,13 +21,33 @@ #include <asm/asm-offsets.h> #include <asm/kvm_asm.h> #include <asm/kvm_arm.h> +#include <asm/kvm_mmu.h> /******************************************************************** * Hypervisor initialization * - should be called with: - * r0,r1 = Hypervisor pgd pointer - * r2 = top of Hyp stack (kernel VA) - * r3 = pointer to hyp vectors + * r0 = top of Hyp stack (kernel VA) + * r1 = pointer to hyp vectors + * r2,r3 = Hypervisor pgd pointer + * + * The init scenario is: + * - We jump in HYP with four parameters: boot HYP pgd, runtime HYP pgd, + * runtime stack, runtime vectors + * - Enable the MMU with the boot pgd + * - Jump to a target into the trampoline page (remember, this is the same + * physical page!) + * - Now switch to the runtime pgd (same VA, and still the same physical + * page!) + * - Invalidate TLBs + * - Set stack and vectors + * - Profit! (or eret, if you only care about the code). + * + * As we only have four registers available to pass parameters (and we + * need six), we split the init in two phases: + * - Phase 1: r0 = 0, r1 = 0, r2,r3 contain the boot PGD. + * Provides the basic HYP init, and enable the MMU. + * - Phase 2: r0 = ToS, r1 = vectors, r2,r3 contain the runtime PGD. + * Switches to the runtime PGD, set stack and vectors. */ .text @@ -47,22 +67,25 @@ __kvm_hyp_init: W(b) . __do_hyp_init: + cmp r0, #0 @ We have a SP? + bne phase2 @ Yes, second stage init + @ Set the HTTBR to point to the hypervisor PGD pointer passed - mcrr p15, 4, r0, r1, c2 + mcrr p15, 4, r2, r3, c2 @ Set the HTCR and VTCR to the same shareability and cacheability @ settings as the non-secure TTBCR and with T0SZ == 0. mrc p15, 4, r0, c2, c0, 2 @ HTCR - ldr r12, =HTCR_MASK - bic r0, r0, r12 + ldr r2, =HTCR_MASK + bic r0, r0, r2 mrc p15, 0, r1, c2, c0, 2 @ TTBCR and r1, r1, #(HTCR_MASK & ~TTBCR_T0SZ) orr r0, r0, r1 mcr p15, 4, r0, c2, c0, 2 @ HTCR mrc p15, 4, r1, c2, c1, 2 @ VTCR - ldr r12, =VTCR_MASK - bic r1, r1, r12 + ldr r2, =VTCR_MASK + bic r1, r1, r2 bic r0, r0, #(~VTCR_HTCR_SH) @ clear non-reusable HTCR bits orr r1, r0, r1 orr r1, r1, #(KVM_VTCR_SL0 | KVM_VTCR_T0SZ | KVM_VTCR_S) @@ -85,24 +108,41 @@ __do_hyp_init: @ - Memory alignment checks: enabled @ - MMU: enabled (this code must be run from an identity mapping) mrc p15, 4, r0, c1, c0, 0 @ HSCR - ldr r12, =HSCTLR_MASK - bic r0, r0, r12 + ldr r2, =HSCTLR_MASK + bic r0, r0, r2 mrc p15, 0, r1, c1, c0, 0 @ SCTLR - ldr r12, =(HSCTLR_EE | HSCTLR_FI | HSCTLR_I | HSCTLR_C) - and r1, r1, r12 - ARM( ldr r12, =(HSCTLR_M | HSCTLR_A) ) - THUMB( ldr r12, =(HSCTLR_M | HSCTLR_A | HSCTLR_TE) ) - orr r1, r1, r12 + ldr r2, =(HSCTLR_EE | HSCTLR_FI | HSCTLR_I | HSCTLR_C) + and r1, r1, r2 + ARM( ldr r2, =(HSCTLR_M | HSCTLR_A) ) + THUMB( ldr r2, =(HSCTLR_M | HSCTLR_A | HSCTLR_TE) ) + orr r1, r1, r2 orr r0, r0, r1 isb mcr p15, 4, r0, c1, c0, 0 @ HSCR - isb - @ Set stack pointer and return to the kernel - mov sp, r2 + @ End of init phase-1 + eret + +phase2: + @ Set stack pointer + mov sp, r0 @ Set HVBAR to point to the HYP vectors - mcr p15, 4, r3, c12, c0, 0 @ HVBAR + mcr p15, 4, r1, c12, c0, 0 @ HVBAR + + @ Jump to the trampoline page + ldr r0, =TRAMPOLINE_VA + adr r1, target + bfi r0, r1, #0, #PAGE_SHIFT + mov pc, r0 + +target: @ We're now in the trampoline code, switch page tables + mcrr p15, 4, r2, r3, c2 + isb + + @ Invalidate the old TLBs + mcr p15, 4, r0, c8, c7, 0 @ TLBIALLH + dsb eret diff --git a/arch/arm/kvm/interrupts.S b/arch/arm/kvm/interrupts.S index 8ca87ab0919d..f7793df62f58 100644 --- a/arch/arm/kvm/interrupts.S +++ b/arch/arm/kvm/interrupts.S @@ -35,15 +35,18 @@ __kvm_hyp_code_start: /******************************************************************** * Flush per-VMID TLBs * - * void __kvm_tlb_flush_vmid(struct kvm *kvm); + * void __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa); * * We rely on the hardware to broadcast the TLB invalidation to all CPUs * inside the inner-shareable domain (which is the case for all v7 * implementations). If we come across a non-IS SMP implementation, we'll * have to use an IPI based mechanism. Until then, we stick to the simple * hardware assisted version. + * + * As v7 does not support flushing per IPA, just nuke the whole TLB + * instead, ignoring the ipa value. */ -ENTRY(__kvm_tlb_flush_vmid) +ENTRY(__kvm_tlb_flush_vmid_ipa) push {r2, r3} add r0, r0, #KVM_VTTBR @@ -60,7 +63,7 @@ ENTRY(__kvm_tlb_flush_vmid) pop {r2, r3} bx lr -ENDPROC(__kvm_tlb_flush_vmid) +ENDPROC(__kvm_tlb_flush_vmid_ipa) /******************************************************************** * Flush TLBs and instruction caches of all CPUs inside the inner-shareable @@ -235,9 +238,9 @@ ENTRY(kvm_call_hyp) * instruction is issued since all traps are disabled when running the host * kernel as per the Hyp-mode initialization at boot time. * - * HVC instructions cause a trap to the vector page + offset 0x18 (see hyp_hvc + * HVC instructions cause a trap to the vector page + offset 0x14 (see hyp_hvc * below) when the HVC instruction is called from SVC mode (i.e. a guest or the - * host kernel) and they cause a trap to the vector page + offset 0xc when HVC + * host kernel) and they cause a trap to the vector page + offset 0x8 when HVC * instructions are called from within Hyp-mode. * * Hyp-ABI: Calling HYP-mode functions from host (in SVC mode): diff --git a/arch/arm/kvm/mmio.c b/arch/arm/kvm/mmio.c index 98a870ff1a5c..72a12f2171b2 100644 --- a/arch/arm/kvm/mmio.c +++ b/arch/arm/kvm/mmio.c @@ -33,16 +33,16 @@ */ int kvm_handle_mmio_return(struct kvm_vcpu *vcpu, struct kvm_run *run) { - __u32 *dest; + unsigned long *dest; unsigned int len; int mask; if (!run->mmio.is_write) { dest = vcpu_reg(vcpu, vcpu->arch.mmio_decode.rt); - memset(dest, 0, sizeof(int)); + *dest = 0; len = run->mmio.len; - if (len > 4) + if (len > sizeof(unsigned long)) return -EINVAL; memcpy(dest, run->mmio.data, len); @@ -50,7 +50,8 @@ int kvm_handle_mmio_return(struct kvm_vcpu *vcpu, struct kvm_run *run) trace_kvm_mmio(KVM_TRACE_MMIO_READ, len, run->mmio.phys_addr, *((u64 *)run->mmio.data)); - if (vcpu->arch.mmio_decode.sign_extend && len < 4) { + if (vcpu->arch.mmio_decode.sign_extend && + len < sizeof(unsigned long)) { mask = 1U << ((len * 8) - 1); *dest = (*dest ^ mask) - mask; } @@ -65,40 +66,29 @@ static int decode_hsr(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, unsigned long rt, len; bool is_write, sign_extend; - if ((vcpu->arch.hsr >> 8) & 1) { + if (kvm_vcpu_dabt_isextabt(vcpu)) { /* cache operation on I/O addr, tell guest unsupported */ - kvm_inject_dabt(vcpu, vcpu->arch.hxfar); + kvm_inject_dabt(vcpu, kvm_vcpu_get_hfar(vcpu)); return 1; } - if ((vcpu->arch.hsr >> 7) & 1) { + if (kvm_vcpu_dabt_iss1tw(vcpu)) { /* page table accesses IO mem: tell guest to fix its TTBR */ - kvm_inject_dabt(vcpu, vcpu->arch.hxfar); + kvm_inject_dabt(vcpu, kvm_vcpu_get_hfar(vcpu)); return 1; } - switch ((vcpu->arch.hsr >> 22) & 0x3) { - case 0: - len = 1; - break; - case 1: - len = 2; - break; - case 2: - len = 4; - break; - default: - kvm_err("Hardware is weird: SAS 0b11 is reserved\n"); - return -EFAULT; - } + len = kvm_vcpu_dabt_get_as(vcpu); + if (unlikely(len < 0)) + return len; - is_write = vcpu->arch.hsr & HSR_WNR; - sign_extend = vcpu->arch.hsr & HSR_SSE; - rt = (vcpu->arch.hsr & HSR_SRT_MASK) >> HSR_SRT_SHIFT; + is_write = kvm_vcpu_dabt_iswrite(vcpu); + sign_extend = kvm_vcpu_dabt_issext(vcpu); + rt = kvm_vcpu_dabt_get_rd(vcpu); if (kvm_vcpu_reg_is_pc(vcpu, rt)) { /* IO memory trying to read/write pc */ - kvm_inject_pabt(vcpu, vcpu->arch.hxfar); + kvm_inject_pabt(vcpu, kvm_vcpu_get_hfar(vcpu)); return 1; } @@ -112,7 +102,7 @@ static int decode_hsr(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, * The MMIO instruction is emulated and should not be re-executed * in the guest. */ - kvm_skip_instr(vcpu, (vcpu->arch.hsr >> 25) & 1); + kvm_skip_instr(vcpu, kvm_vcpu_trap_il_is32bit(vcpu)); return 0; } @@ -130,7 +120,7 @@ int io_mem_abort(struct kvm_vcpu *vcpu, struct kvm_run *run, * space do its magic. */ - if (vcpu->arch.hsr & HSR_ISV) { + if (kvm_vcpu_dabt_isvalid(vcpu)) { ret = decode_hsr(vcpu, fault_ipa, &mmio); if (ret) return ret; diff --git a/arch/arm/kvm/mmu.c b/arch/arm/kvm/mmu.c index 99e07c7dd745..965706578f13 100644 --- a/arch/arm/kvm/mmu.c +++ b/arch/arm/kvm/mmu.c @@ -20,7 +20,6 @@ #include <linux/kvm_host.h> #include <linux/io.h> #include <trace/events/kvm.h> -#include <asm/idmap.h> #include <asm/pgalloc.h> #include <asm/cacheflush.h> #include <asm/kvm_arm.h> @@ -28,28 +27,23 @@ #include <asm/kvm_mmio.h> #include <asm/kvm_asm.h> #include <asm/kvm_emulate.h> -#include <asm/mach/map.h> -#include <trace/events/kvm.h> #include "trace.h" extern char __hyp_idmap_text_start[], __hyp_idmap_text_end[]; +static pgd_t *boot_hyp_pgd; +static pgd_t *hyp_pgd; static DEFINE_MUTEX(kvm_hyp_pgd_mutex); -static void kvm_tlb_flush_vmid(struct kvm *kvm) -{ - kvm_call_hyp(__kvm_tlb_flush_vmid, kvm); -} +static void *init_bounce_page; +static unsigned long hyp_idmap_start; +static unsigned long hyp_idmap_end; +static phys_addr_t hyp_idmap_vector; -static void kvm_set_pte(pte_t *pte, pte_t new_pte) +static void kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa) { - pte_val(*pte) = new_pte; - /* - * flush_pmd_entry just takes a void pointer and cleans the necessary - * cache entries, so we can reuse the function for ptes. - */ - flush_pmd_entry(pte); + kvm_call_hyp(__kvm_tlb_flush_vmid_ipa, kvm, ipa); } static int mmu_topup_memory_cache(struct kvm_mmu_memory_cache *cache, @@ -84,88 +78,165 @@ static void *mmu_memory_cache_alloc(struct kvm_mmu_memory_cache *mc) return p; } -static void free_ptes(pmd_t *pmd, unsigned long addr) +static void clear_pud_entry(pud_t *pud) { - pte_t *pte; - unsigned int i; + pmd_t *pmd_table = pmd_offset(pud, 0); + pud_clear(pud); + pmd_free(NULL, pmd_table); + put_page(virt_to_page(pud)); +} - for (i = 0; i < PTRS_PER_PMD; i++, addr += PMD_SIZE) { - if (!pmd_none(*pmd) && pmd_table(*pmd)) { - pte = pte_offset_kernel(pmd, addr); - pte_free_kernel(NULL, pte); - } - pmd++; +static void clear_pmd_entry(pmd_t *pmd) +{ + pte_t *pte_table = pte_offset_kernel(pmd, 0); + pmd_clear(pmd); + pte_free_kernel(NULL, pte_table); + put_page(virt_to_page(pmd)); +} + +static bool pmd_empty(pmd_t *pmd) +{ + struct page *pmd_page = virt_to_page(pmd); + return page_count(pmd_page) == 1; +} + +static void clear_pte_entry(pte_t *pte) +{ + if (pte_present(*pte)) { + kvm_set_pte(pte, __pte(0)); + put_page(virt_to_page(pte)); } } -/** - * free_hyp_pmds - free a Hyp-mode level-2 tables and child level-3 tables - * - * Assumes this is a page table used strictly in Hyp-mode and therefore contains - * only mappings in the kernel memory area, which is above PAGE_OFFSET. - */ -void free_hyp_pmds(void) +static bool pte_empty(pte_t *pte) +{ + struct page *pte_page = virt_to_page(pte); + return page_count(pte_page) == 1; +} + +static void unmap_range(pgd_t *pgdp, unsigned long long start, u64 size) { pgd_t *pgd; pud_t *pud; pmd_t *pmd; - unsigned long addr; + pte_t *pte; + unsigned long long addr = start, end = start + size; + u64 range; - mutex_lock(&kvm_hyp_pgd_mutex); - for (addr = PAGE_OFFSET; addr != 0; addr += PGDIR_SIZE) { - pgd = hyp_pgd + pgd_index(addr); + while (addr < end) { + pgd = pgdp + pgd_index(addr); pud = pud_offset(pgd, addr); - - if (pud_none(*pud)) + if (pud_none(*pud)) { + addr += PUD_SIZE; continue; - BUG_ON(pud_bad(*pud)); + } pmd = pmd_offset(pud, addr); - free_ptes(pmd, addr); - pmd_free(NULL, pmd); - pud_clear(pud); + if (pmd_none(*pmd)) { + addr += PMD_SIZE; + continue; + } + + pte = pte_offset_kernel(pmd, addr); + clear_pte_entry(pte); + range = PAGE_SIZE; + + /* If we emptied the pte, walk back up the ladder */ + if (pte_empty(pte)) { + clear_pmd_entry(pmd); + range = PMD_SIZE; + if (pmd_empty(pmd)) { + clear_pud_entry(pud); + range = PUD_SIZE; + } + } + + addr += range; + } +} + +/** + * free_boot_hyp_pgd - free HYP boot page tables + * + * Free the HYP boot page tables. The bounce page is also freed. + */ +void free_boot_hyp_pgd(void) +{ + mutex_lock(&kvm_hyp_pgd_mutex); + + if (boot_hyp_pgd) { + unmap_range(boot_hyp_pgd, hyp_idmap_start, PAGE_SIZE); + unmap_range(boot_hyp_pgd, TRAMPOLINE_VA, PAGE_SIZE); + kfree(boot_hyp_pgd); + boot_hyp_pgd = NULL; } + + if (hyp_pgd) + unmap_range(hyp_pgd, TRAMPOLINE_VA, PAGE_SIZE); + + kfree(init_bounce_page); + init_bounce_page = NULL; + mutex_unlock(&kvm_hyp_pgd_mutex); } -static void create_hyp_pte_mappings(pmd_t *pmd, unsigned long start, - unsigned long end) +/** + * free_hyp_pgds - free Hyp-mode page tables + * + * Assumes hyp_pgd is a page table used strictly in Hyp-mode and + * therefore contains either mappings in the kernel memory area (above + * PAGE_OFFSET), or device mappings in the vmalloc range (from + * VMALLOC_START to VMALLOC_END). + * + * boot_hyp_pgd should only map two pages for the init code. + */ +void free_hyp_pgds(void) { - pte_t *pte; unsigned long addr; - struct page *page; - for (addr = start & PAGE_MASK; addr < end; addr += PAGE_SIZE) { - pte = pte_offset_kernel(pmd, addr); - BUG_ON(!virt_addr_valid(addr)); - page = virt_to_page(addr); - kvm_set_pte(pte, mk_pte(page, PAGE_HYP)); + free_boot_hyp_pgd(); + + mutex_lock(&kvm_hyp_pgd_mutex); + + if (hyp_pgd) { + for (addr = PAGE_OFFSET; virt_addr_valid(addr); addr += PGDIR_SIZE) + unmap_range(hyp_pgd, KERN_TO_HYP(addr), PGDIR_SIZE); + for (addr = VMALLOC_START; is_vmalloc_addr((void*)addr); addr += PGDIR_SIZE) + unmap_range(hyp_pgd, KERN_TO_HYP(addr), PGDIR_SIZE); + kfree(hyp_pgd); + hyp_pgd = NULL; } + + mutex_unlock(&kvm_hyp_pgd_mutex); } -static void create_hyp_io_pte_mappings(pmd_t *pmd, unsigned long start, - unsigned long end, - unsigned long *pfn_base) +static void create_hyp_pte_mappings(pmd_t *pmd, unsigned long start, + unsigned long end, unsigned long pfn, + pgprot_t prot) { pte_t *pte; unsigned long addr; - for (addr = start & PAGE_MASK; addr < end; addr += PAGE_SIZE) { + addr = start; + do { pte = pte_offset_kernel(pmd, addr); - BUG_ON(pfn_valid(*pfn_base)); - kvm_set_pte(pte, pfn_pte(*pfn_base, PAGE_HYP_DEVICE)); - (*pfn_base)++; - } + kvm_set_pte(pte, pfn_pte(pfn, prot)); + get_page(virt_to_page(pte)); + kvm_flush_dcache_to_poc(pte, sizeof(*pte)); + pfn++; + } while (addr += PAGE_SIZE, addr != end); } static int create_hyp_pmd_mappings(pud_t *pud, unsigned long start, - unsigned long end, unsigned long *pfn_base) + unsigned long end, unsigned long pfn, + pgprot_t prot) { pmd_t *pmd; pte_t *pte; unsigned long addr, next; - for (addr = start; addr < end; addr = next) { + addr = start; + do { pmd = pmd_offset(pud, addr); BUG_ON(pmd_sect(*pmd)); @@ -177,42 +248,34 @@ static int create_hyp_pmd_mappings(pud_t *pud, unsigned long start, return -ENOMEM; } pmd_populate_kernel(NULL, pmd, pte); + get_page(virt_to_page(pmd)); + kvm_flush_dcache_to_poc(pmd, sizeof(*pmd)); } next = pmd_addr_end(addr, end); - /* - * If pfn_base is NULL, we map kernel pages into HYP with the - * virtual address. Otherwise, this is considered an I/O - * mapping and we map the physical region starting at - * *pfn_base to [start, end[. - */ - if (!pfn_base) - create_hyp_pte_mappings(pmd, addr, next); - else - create_hyp_io_pte_mappings(pmd, addr, next, pfn_base); - } + create_hyp_pte_mappings(pmd, addr, next, pfn, prot); + pfn += (next - addr) >> PAGE_SHIFT; + } while (addr = next, addr != end); return 0; } -static int __create_hyp_mappings(void *from, void *to, unsigned long *pfn_base) +static int __create_hyp_mappings(pgd_t *pgdp, + unsigned long start, unsigned long end, + unsigned long pfn, pgprot_t prot) { - unsigned long start = (unsigned long)from; - unsigned long end = (unsigned long)to; pgd_t *pgd; pud_t *pud; pmd_t *pmd; unsigned long addr, next; int err = 0; - BUG_ON(start > end); - if (start < PAGE_OFFSET) - return -EINVAL; - mutex_lock(&kvm_hyp_pgd_mutex); - for (addr = start; addr < end; addr = next) { - pgd = hyp_pgd + pgd_index(addr); + addr = start & PAGE_MASK; + end = PAGE_ALIGN(end); + do { + pgd = pgdp + pgd_index(addr); pud = pud_offset(pgd, addr); if (pud_none_or_clear_bad(pud)) { @@ -223,43 +286,64 @@ static int __create_hyp_mappings(void *from, void *to, unsigned long *pfn_base) goto out; } pud_populate(NULL, pud, pmd); + get_page(virt_to_page(pud)); + kvm_flush_dcache_to_poc(pud, sizeof(*pud)); } next = pgd_addr_end(addr, end); - err = create_hyp_pmd_mappings(pud, addr, next, pfn_base); + err = create_hyp_pmd_mappings(pud, addr, next, pfn, prot); if (err) goto out; - } + pfn += (next - addr) >> PAGE_SHIFT; + } while (addr = next, addr != end); out: mutex_unlock(&kvm_hyp_pgd_mutex); return err; } /** - * create_hyp_mappings - map a kernel virtual address range in Hyp mode + * create_hyp_mappings - duplicate a kernel virtual address range in Hyp mode * @from: The virtual kernel start address of the range * @to: The virtual kernel end address of the range (exclusive) * - * The same virtual address as the kernel virtual address is also used in - * Hyp-mode mapping to the same underlying physical pages. - * - * Note: Wrapping around zero in the "to" address is not supported. + * The same virtual address as the kernel virtual address is also used + * in Hyp-mode mapping (modulo HYP_PAGE_OFFSET) to the same underlying + * physical pages. */ int create_hyp_mappings(void *from, void *to) { - return __create_hyp_mappings(from, to, NULL); + unsigned long phys_addr = virt_to_phys(from); + unsigned long start = KERN_TO_HYP((unsigned long)from); + unsigned long end = KERN_TO_HYP((unsigned long)to); + + /* Check for a valid kernel memory mapping */ + if (!virt_addr_valid(from) || !virt_addr_valid(to - 1)) + return -EINVAL; + + return __create_hyp_mappings(hyp_pgd, start, end, + __phys_to_pfn(phys_addr), PAGE_HYP); } /** - * create_hyp_io_mappings - map a physical IO range in Hyp mode - * @from: The virtual HYP start address of the range - * @to: The virtual HYP end address of the range (exclusive) - * @addr: The physical start address which gets mapped + * create_hyp_io_mappings - duplicate a kernel IO mapping into Hyp mode + * @from: The kernel start VA of the range + * @to: The kernel end VA of the range (exclusive) + * @phys_addr: The physical start address which gets mapped + * + * The resulting HYP VA is the same as the kernel VA, modulo + * HYP_PAGE_OFFSET. */ -int create_hyp_io_mappings(void *from, void *to, phys_addr_t addr) +int create_hyp_io_mappings(void *from, void *to, phys_addr_t phys_addr) { - unsigned long pfn = __phys_to_pfn(addr); - return __create_hyp_mappings(from, to, &pfn); + unsigned long start = KERN_TO_HYP((unsigned long)from); + unsigned long end = KERN_TO_HYP((unsigned long)to); + + /* Check for a valid kernel IO mapping */ + if (!is_vmalloc_addr(from) || !is_vmalloc_addr(to - 1)) + return -EINVAL; + + return __create_hyp_mappings(hyp_pgd, start, end, + __phys_to_pfn(phys_addr), PAGE_HYP_DEVICE); } /** @@ -290,48 +374,12 @@ int kvm_alloc_stage2_pgd(struct kvm *kvm) VM_BUG_ON((unsigned long)pgd & (S2_PGD_SIZE - 1)); memset(pgd, 0, PTRS_PER_S2_PGD * sizeof(pgd_t)); - clean_dcache_area(pgd, PTRS_PER_S2_PGD * sizeof(pgd_t)); + kvm_clean_pgd(pgd); kvm->arch.pgd = pgd; return 0; } -static void clear_pud_entry(pud_t *pud) -{ - pmd_t *pmd_table = pmd_offset(pud, 0); - pud_clear(pud); - pmd_free(NULL, pmd_table); - put_page(virt_to_page(pud)); -} - -static void clear_pmd_entry(pmd_t *pmd) -{ - pte_t *pte_table = pte_offset_kernel(pmd, 0); - pmd_clear(pmd); - pte_free_kernel(NULL, pte_table); - put_page(virt_to_page(pmd)); -} - -static bool pmd_empty(pmd_t *pmd) -{ - struct page *pmd_page = virt_to_page(pmd); - return page_count(pmd_page) == 1; -} - -static void clear_pte_entry(pte_t *pte) -{ - if (pte_present(*pte)) { - kvm_set_pte(pte, __pte(0)); - put_page(virt_to_page(pte)); - } -} - -static bool pte_empty(pte_t *pte) -{ - struct page *pte_page = virt_to_page(pte); - return page_count(pte_page) == 1; -} - /** * unmap_stage2_range -- Clear stage2 page table entries to unmap a range * @kvm: The VM pointer @@ -345,43 +393,7 @@ static bool pte_empty(pte_t *pte) */ static void unmap_stage2_range(struct kvm *kvm, phys_addr_t start, u64 size) { - pgd_t *pgd; - pud_t *pud; - pmd_t *pmd; - pte_t *pte; - phys_addr_t addr = start, end = start + size; - u64 range; - - while (addr < end) { - pgd = kvm->arch.pgd + pgd_index(addr); - pud = pud_offset(pgd, addr); - if (pud_none(*pud)) { - addr += PUD_SIZE; - continue; - } - - pmd = pmd_offset(pud, addr); - if (pmd_none(*pmd)) { - addr += PMD_SIZE; - continue; - } - - pte = pte_offset_kernel(pmd, addr); - clear_pte_entry(pte); - range = PAGE_SIZE; - - /* If we emptied the pte, walk back up the ladder */ - if (pte_empty(pte)) { - clear_pmd_entry(pmd); - range = PMD_SIZE; - if (pmd_empty(pmd)) { - clear_pud_entry(pud); - range = PUD_SIZE; - } - } - - addr += range; - } + unmap_range(kvm->arch.pgd, start, size); } /** @@ -422,22 +434,22 @@ static int stage2_set_pte(struct kvm *kvm, struct kvm_mmu_memory_cache *cache, return 0; /* ignore calls from kvm_set_spte_hva */ pmd = mmu_memory_cache_alloc(cache); pud_populate(NULL, pud, pmd); - pmd += pmd_index(addr); get_page(virt_to_page(pud)); - } else - pmd = pmd_offset(pud, addr); + } + + pmd = pmd_offset(pud, addr); /* Create 2nd stage page table mapping - Level 2 */ if (pmd_none(*pmd)) { if (!cache) return 0; /* ignore calls from kvm_set_spte_hva */ pte = mmu_memory_cache_alloc(cache); - clean_pte_table(pte); + kvm_clean_pte(pte); pmd_populate_kernel(NULL, pmd, pte); - pte += pte_index(addr); get_page(virt_to_page(pmd)); - } else - pte = pte_offset_kernel(pmd, addr); + } + + pte = pte_offset_kernel(pmd, addr); if (iomap && pte_present(*pte)) return -EFAULT; @@ -446,7 +458,7 @@ static int stage2_set_pte(struct kvm *kvm, struct kvm_mmu_memory_cache *cache, old_pte = *pte; kvm_set_pte(pte, *new_pte); if (pte_present(old_pte)) - kvm_tlb_flush_vmid(kvm); + kvm_tlb_flush_vmid_ipa(kvm, addr); else get_page(virt_to_page(pte)); @@ -473,7 +485,8 @@ int kvm_phys_addr_ioremap(struct kvm *kvm, phys_addr_t guest_ipa, pfn = __phys_to_pfn(pa); for (addr = guest_ipa; addr < end; addr += PAGE_SIZE) { - pte_t pte = pfn_pte(pfn, PAGE_S2_DEVICE | L_PTE_S2_RDWR); + pte_t pte = pfn_pte(pfn, PAGE_S2_DEVICE); + kvm_set_s2pte_writable(&pte); ret = mmu_topup_memory_cache(&cache, 2, 2); if (ret) @@ -492,29 +505,6 @@ out: return ret; } -static void coherent_icache_guest_page(struct kvm *kvm, gfn_t gfn) -{ - /* - * If we are going to insert an instruction page and the icache is - * either VIPT or PIPT, there is a potential problem where the host - * (or another VM) may have used the same page as this guest, and we - * read incorrect data from the icache. If we're using a PIPT cache, - * we can invalidate just that page, but if we are using a VIPT cache - * we need to invalidate the entire icache - damn shame - as written - * in the ARM ARM (DDI 0406C.b - Page B3-1393). - * - * VIVT caches are tagged using both the ASID and the VMID and doesn't - * need any kind of flushing (DDI 0406C.b - Page B3-1392). - */ - if (icache_is_pipt()) { - unsigned long hva = gfn_to_hva(kvm, gfn); - __cpuc_coherent_user_range(hva, hva + PAGE_SIZE); - } else if (!icache_is_vivt_asid_tagged()) { - /* any kind of VIPT cache */ - __flush_icache_all(); - } -} - static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, gfn_t gfn, struct kvm_memory_slot *memslot, unsigned long fault_status) @@ -526,7 +516,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, unsigned long mmu_seq; struct kvm_mmu_memory_cache *memcache = &vcpu->arch.mmu_page_cache; - write_fault = kvm_is_write_fault(vcpu->arch.hsr); + write_fault = kvm_is_write_fault(kvm_vcpu_get_hsr(vcpu)); if (fault_status == FSC_PERM && !write_fault) { kvm_err("Unexpected L2 read permission error\n"); return -EFAULT; @@ -560,7 +550,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, if (mmu_notifier_retry(vcpu->kvm, mmu_seq)) goto out_unlock; if (writable) { - pte_val(new_pte) |= L_PTE_S2_RDWR; + kvm_set_s2pte_writable(&new_pte); kvm_set_pfn_dirty(pfn); } stage2_set_pte(vcpu->kvm, memcache, fault_ipa, &new_pte, false); @@ -585,7 +575,6 @@ out_unlock: */ int kvm_handle_guest_abort(struct kvm_vcpu *vcpu, struct kvm_run *run) { - unsigned long hsr_ec; unsigned long fault_status; phys_addr_t fault_ipa; struct kvm_memory_slot *memslot; @@ -593,18 +582,17 @@ int kvm_handle_guest_abort(struct kvm_vcpu *vcpu, struct kvm_run *run) gfn_t gfn; int ret, idx; - hsr_ec = vcpu->arch.hsr >> HSR_EC_SHIFT; - is_iabt = (hsr_ec == HSR_EC_IABT); - fault_ipa = ((phys_addr_t)vcpu->arch.hpfar & HPFAR_MASK) << 8; + is_iabt = kvm_vcpu_trap_is_iabt(vcpu); + fault_ipa = kvm_vcpu_get_fault_ipa(vcpu); - trace_kvm_guest_fault(*vcpu_pc(vcpu), vcpu->arch.hsr, - vcpu->arch.hxfar, fault_ipa); + trace_kvm_guest_fault(*vcpu_pc(vcpu), kvm_vcpu_get_hsr(vcpu), + kvm_vcpu_get_hfar(vcpu), fault_ipa); /* Check the stage-2 fault is trans. fault or write fault */ - fault_status = (vcpu->arch.hsr & HSR_FSC_TYPE); + fault_status = kvm_vcpu_trap_get_fault(vcpu); if (fault_status != FSC_FAULT && fault_status != FSC_PERM) { - kvm_err("Unsupported fault status: EC=%#lx DFCS=%#lx\n", - hsr_ec, fault_status); + kvm_err("Unsupported fault status: EC=%#x DFCS=%#lx\n", + kvm_vcpu_trap_get_class(vcpu), fault_status); return -EFAULT; } @@ -614,7 +602,7 @@ int kvm_handle_guest_abort(struct kvm_vcpu *vcpu, struct kvm_run *run) if (!kvm_is_visible_gfn(vcpu->kvm, gfn)) { if (is_iabt) { /* Prefetch Abort on I/O address */ - kvm_inject_pabt(vcpu, vcpu->arch.hxfar); + kvm_inject_pabt(vcpu, kvm_vcpu_get_hfar(vcpu)); ret = 1; goto out_unlock; } @@ -626,8 +614,13 @@ int kvm_handle_guest_abort(struct kvm_vcpu *vcpu, struct kvm_run *run) goto out_unlock; } - /* Adjust page offset */ - fault_ipa |= vcpu->arch.hxfar & ~PAGE_MASK; + /* + * The IPA is reported as [MAX:12], so we need to + * complement it with the bottom 12 bits from the + * faulting VA. This is always 12 bits, irrespective + * of the page size. + */ + fault_ipa |= kvm_vcpu_get_hfar(vcpu) & ((1 << 12) - 1); ret = io_mem_abort(vcpu, run, fault_ipa); goto out_unlock; } @@ -682,7 +675,7 @@ static void handle_hva_to_gpa(struct kvm *kvm, static void kvm_unmap_hva_handler(struct kvm *kvm, gpa_t gpa, void *data) { unmap_stage2_range(kvm, gpa, PAGE_SIZE); - kvm_tlb_flush_vmid(kvm); + kvm_tlb_flush_vmid_ipa(kvm, gpa); } int kvm_unmap_hva(struct kvm *kvm, unsigned long hva) @@ -736,47 +729,105 @@ void kvm_mmu_free_memory_caches(struct kvm_vcpu *vcpu) phys_addr_t kvm_mmu_get_httbr(void) { - VM_BUG_ON(!virt_addr_valid(hyp_pgd)); return virt_to_phys(hyp_pgd); } +phys_addr_t kvm_mmu_get_boot_httbr(void) +{ + return virt_to_phys(boot_hyp_pgd); +} + +phys_addr_t kvm_get_idmap_vector(void) +{ + return hyp_idmap_vector; +} + int kvm_mmu_init(void) { - if (!hyp_pgd) { + int err; + + hyp_idmap_start = virt_to_phys(__hyp_idmap_text_start); + hyp_idmap_end = virt_to_phys(__hyp_idmap_text_end); + hyp_idmap_vector = virt_to_phys(__kvm_hyp_init); + + if ((hyp_idmap_start ^ hyp_idmap_end) & PAGE_MASK) { + /* + * Our init code is crossing a page boundary. Allocate + * a bounce page, copy the code over and use that. + */ + size_t len = __hyp_idmap_text_end - __hyp_idmap_text_start; + phys_addr_t phys_base; + + init_bounce_page = kmalloc(PAGE_SIZE, GFP_KERNEL); + if (!init_bounce_page) { + kvm_err("Couldn't allocate HYP init bounce page\n"); + err = -ENOMEM; + goto out; + } + + memcpy(init_bounce_page, __hyp_idmap_text_start, len); + /* + * Warning: the code we just copied to the bounce page + * must be flushed to the point of coherency. + * Otherwise, the data may be sitting in L2, and HYP + * mode won't be able to observe it as it runs with + * caches off at that point. + */ + kvm_flush_dcache_to_poc(init_bounce_page, len); + + phys_base = virt_to_phys(init_bounce_page); + hyp_idmap_vector += phys_base - hyp_idmap_start; + hyp_idmap_start = phys_base; + hyp_idmap_end = phys_base + len; + + kvm_info("Using HYP init bounce page @%lx\n", + (unsigned long)phys_base); + } + + hyp_pgd = kzalloc(PTRS_PER_PGD * sizeof(pgd_t), GFP_KERNEL); + boot_hyp_pgd = kzalloc(PTRS_PER_PGD * sizeof(pgd_t), GFP_KERNEL); + if (!hyp_pgd || !boot_hyp_pgd) { kvm_err("Hyp mode PGD not allocated\n"); - return -ENOMEM; + err = -ENOMEM; + goto out; } - return 0; -} + /* Create the idmap in the boot page tables */ + err = __create_hyp_mappings(boot_hyp_pgd, + hyp_idmap_start, hyp_idmap_end, + __phys_to_pfn(hyp_idmap_start), + PAGE_HYP); -/** - * kvm_clear_idmap - remove all idmaps from the hyp pgd - * - * Free the underlying pmds for all pgds in range and clear the pgds (but - * don't free them) afterwards. - */ -void kvm_clear_hyp_idmap(void) -{ - unsigned long addr, end; - unsigned long next; - pgd_t *pgd = hyp_pgd; - pud_t *pud; - pmd_t *pmd; + if (err) { + kvm_err("Failed to idmap %lx-%lx\n", + hyp_idmap_start, hyp_idmap_end); + goto out; + } - addr = virt_to_phys(__hyp_idmap_text_start); - end = virt_to_phys(__hyp_idmap_text_end); + /* Map the very same page at the trampoline VA */ + err = __create_hyp_mappings(boot_hyp_pgd, + TRAMPOLINE_VA, TRAMPOLINE_VA + PAGE_SIZE, + __phys_to_pfn(hyp_idmap_start), + PAGE_HYP); + if (err) { + kvm_err("Failed to map trampoline @%lx into boot HYP pgd\n", + TRAMPOLINE_VA); + goto out; + } - pgd += pgd_index(addr); - do { - next = pgd_addr_end(addr, end); - if (pgd_none_or_clear_bad(pgd)) - continue; - pud = pud_offset(pgd, addr); - pmd = pmd_offset(pud, addr); + /* Map the same page again into the runtime page tables */ + err = __create_hyp_mappings(hyp_pgd, + TRAMPOLINE_VA, TRAMPOLINE_VA + PAGE_SIZE, + __phys_to_pfn(hyp_idmap_start), + PAGE_HYP); + if (err) { + kvm_err("Failed to map trampoline @%lx into runtime HYP pgd\n", + TRAMPOLINE_VA); + goto out; + } - pud_clear(pud); - clean_pmd_entry(pmd); - pmd_free(NULL, (pmd_t *)((unsigned long)pmd & PAGE_MASK)); - } while (pgd++, addr = next, addr < end); + return 0; +out: + free_hyp_pgds(); + return err; } diff --git a/arch/arm/kvm/perf.c b/arch/arm/kvm/perf.c new file mode 100644 index 000000000000..1a3849da0b4b --- /dev/null +++ b/arch/arm/kvm/perf.c @@ -0,0 +1,68 @@ +/* + * Based on the x86 implementation. + * + * Copyright (C) 2012 ARM Ltd. + * Author: Marc Zyngier <marc.zyngier@arm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/perf_event.h> +#include <linux/kvm_host.h> + +#include <asm/kvm_emulate.h> + +static int kvm_is_in_guest(void) +{ + return kvm_arm_get_running_vcpu() != NULL; +} + +static int kvm_is_user_mode(void) +{ + struct kvm_vcpu *vcpu; + + vcpu = kvm_arm_get_running_vcpu(); + + if (vcpu) + return !vcpu_mode_priv(vcpu); + + return 0; +} + +static unsigned long kvm_get_guest_ip(void) +{ + struct kvm_vcpu *vcpu; + + vcpu = kvm_arm_get_running_vcpu(); + + if (vcpu) + return *vcpu_pc(vcpu); + + return 0; +} + +static struct perf_guest_info_callbacks kvm_guest_cbs = { + .is_in_guest = kvm_is_in_guest, + .is_user_mode = kvm_is_user_mode, + .get_guest_ip = kvm_get_guest_ip, +}; + +int kvm_perf_init(void) +{ + return perf_register_guest_info_callbacks(&kvm_guest_cbs); +} + +int kvm_perf_teardown(void) +{ + return perf_unregister_guest_info_callbacks(&kvm_guest_cbs); +} diff --git a/arch/arm/kvm/vgic.c b/arch/arm/kvm/vgic.c index 0e4cfe123b38..17c5ac7d10ed 100644 --- a/arch/arm/kvm/vgic.c +++ b/arch/arm/kvm/vgic.c @@ -1477,7 +1477,7 @@ int kvm_vgic_set_addr(struct kvm *kvm, unsigned long type, u64 addr) if (addr & ~KVM_PHYS_MASK) return -E2BIG; - if (addr & ~PAGE_MASK) + if (addr & (SZ_4K - 1)) return -EINVAL; mutex_lock(&kvm->lock); diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 6071f4c3d654..02802386b894 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -1,14 +1,15 @@ if ARCH_AT91 -config HAVE_AT91_DATAFLASH_CARD - bool - config HAVE_AT91_DBGU0 bool config HAVE_AT91_DBGU1 bool +config AT91_PMC_UNIT + bool + default !ARCH_AT91X40 + config AT91_SAM9_ALT_RESET bool default !ARCH_AT91X40 @@ -17,17 +18,59 @@ config AT91_SAM9G45_RESET bool default !ARCH_AT91X40 +config AT91_SAM9_TIME + bool + config SOC_AT91SAM9 bool + select AT91_SAM9_TIME select CPU_ARM926T select GENERIC_CLOCKEVENTS select MULTI_IRQ_HANDLER select SPARSE_IRQ +config SOC_SAMA5 + bool + select AT91_SAM9_TIME + select CPU_V7 + select GENERIC_CLOCKEVENTS + select MULTI_IRQ_HANDLER + select SPARSE_IRQ + menu "Atmel AT91 System-on-Chip" +choice + + prompt "Core type" + +config SOC_SAM_V4_V5 + bool "ARM7/ARM9" + help + Select this if you are using one of Atmel's AT91SAM9, AT91RM9200 + or AT91X40 SoC. + +config SOC_SAM_V7 + bool "Cortex A5" + help + Select this if you are using one of Atmel's SAMA5D3 SoC. + +endchoice + comment "Atmel AT91 Processor" +if SOC_SAM_V7 +config SOC_SAMA5D3 + bool "SAMA5D3 family" + depends on SOC_SAM_V7 + select SOC_SAMA5 + select HAVE_FB_ATMEL + select HAVE_AT91_DBGU1 + help + Select this if you are using one of Atmel's SAMA5D3 family SoC. + This support covers SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35. +endif + +if SOC_SAM_V4_V5 config SOC_AT91RM9200 bool "AT91RM9200" select CPU_ARM920T @@ -93,394 +136,10 @@ config SOC_AT91SAM9N12 help Select this if you are using Atmel's AT91SAM9N12 SoC. -choice - prompt "Atmel AT91 Processor Devices for non DT boards" - -config ARCH_AT91_NONE - bool "None" - -config ARCH_AT91RM9200 - bool "AT91RM9200" - select SOC_AT91RM9200 - -config ARCH_AT91SAM9260 - bool "AT91SAM9260 or AT91SAM9XE" - select SOC_AT91SAM9260 - -config ARCH_AT91SAM9261 - bool "AT91SAM9261" - select SOC_AT91SAM9261 - -config ARCH_AT91SAM9G10 - bool "AT91SAM9G10" - select SOC_AT91SAM9261 - -config ARCH_AT91SAM9263 - bool "AT91SAM9263" - select SOC_AT91SAM9263 - -config ARCH_AT91SAM9RL - bool "AT91SAM9RL" - select SOC_AT91SAM9RL - -config ARCH_AT91SAM9G20 - bool "AT91SAM9G20" - select SOC_AT91SAM9260 - -config ARCH_AT91SAM9G45 - bool "AT91SAM9G45" - select SOC_AT91SAM9G45 - -config ARCH_AT91X40 - bool "AT91x40" - depends on !MMU - select ARCH_USES_GETTIMEOFFSET - select MULTI_IRQ_HANDLER - select SPARSE_IRQ - -endchoice - -config AT91_PMC_UNIT - bool - default !ARCH_AT91X40 - -# ---------------------------------------------------------- - -if ARCH_AT91RM9200 - -comment "AT91RM9200 Board Type" - -config MACH_ONEARM - bool "Ajeco 1ARM Single Board Computer" - help - Select this if you are using Ajeco's 1ARM Single Board Computer. - <http://www.ajeco.fi/> - -config ARCH_AT91RM9200DK - bool "Atmel AT91RM9200-DK Development board" - select HAVE_AT91_DATAFLASH_CARD - help - Select this if you are using Atmel's AT91RM9200-DK Development board. - (Discontinued) - -config MACH_AT91RM9200EK - bool "Atmel AT91RM9200-EK Evaluation Kit" - select HAVE_AT91_DATAFLASH_CARD - help - Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit. - <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507> - -config MACH_CSB337 - bool "Cogent CSB337" - help - Select this if you are using Cogent's CSB337 board. - <http://www.cogcomp.com/csb_csb337.htm> - -config MACH_CSB637 - bool "Cogent CSB637" - help - Select this if you are using Cogent's CSB637 board. - <http://www.cogcomp.com/csb_csb637.htm> - -config MACH_CARMEVA - bool "Conitec ARM&EVA" - help - Select this if you are using Conitec's AT91RM9200-MCU-Module. - <http://www.conitec.net/english/linuxboard.php> - -config MACH_ATEB9200 - bool "Embest ATEB9200" - help - Select this if you are using Embest's ATEB9200 board. - <http://www.embedinfo.com/english/product/ATEB9200.asp> - -config MACH_KB9200 - bool "KwikByte KB920x" - help - Select this if you are using KwikByte's KB920x board. - <http://www.kwikbyte.com/KB9202.html> - -config MACH_PICOTUX2XX - bool "picotux 200" - help - Select this if you are using a picotux 200. - <http://www.picotux.com/> - -config MACH_KAFA - bool "Sperry-Sun KAFA board" - help - Select this if you are using Sperry-Sun's KAFA board. - -config MACH_ECBAT91 - bool "emQbit ECB_AT91 SBC" - select HAVE_AT91_DATAFLASH_CARD - help - Select this if you are using emQbit's ECB_AT91 board. - <http://wiki.emqbit.com/free-ecb-at91> - -config MACH_YL9200 - bool "ucDragon YL-9200" - help - Select this if you are using the ucDragon YL-9200 board. - -config MACH_CPUAT91 - bool "Eukrea CPUAT91" - help - Select this if you are using the Eukrea Electromatique's - CPUAT91 board <http://www.eukrea.com/>. - -config MACH_ECO920 - bool "eco920" - help - Select this if you are using the eco920 board - -config MACH_RSI_EWS - bool "RSI Embedded Webserver" - depends on ARCH_AT91RM9200 - help - Select this if you are using RSIs EWS board. -endif - -# ---------------------------------------------------------- - -if ARCH_AT91SAM9260 - -comment "AT91SAM9260 Variants" - -comment "AT91SAM9260 / AT91SAM9XE Board Type" - -config MACH_AT91SAM9260EK - bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit" - select HAVE_AT91_DATAFLASH_CARD - help - Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit - <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933> - -config MACH_CAM60 - bool "KwikByte KB9260 (CAM60) board" - help - Select this if you are using KwikByte's KB9260 (CAM60) board based on the Atmel AT91SAM9260. - <http://www.kwikbyte.com/KB9260.html> - -config MACH_SAM9_L9260 - bool "Olimex SAM9-L9260 board" - select HAVE_AT91_DATAFLASH_CARD - help - Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260. - <http://www.olimex.com/dev/sam9-L9260.html> - -config MACH_AFEB9260 - bool "Custom afeb9260 board v1" - help - Select this if you are using custom afeb9260 board based on - open hardware design. Select this for revision 1 of the board. - <svn://194.85.238.22/home/users/george/svn/arm9eb> - <http://groups.google.com/group/arm9fpga-evolution-board> - -config MACH_USB_A9260 - bool "CALAO USB-A9260" - help - Select this if you are using a Calao Systems USB-A9260. - <http://www.calao-systems.com> - -config MACH_QIL_A9260 - bool "CALAO QIL-A9260 board" - help - Select this if you are using a Calao Systems QIL-A9260 Board. - <http://www.calao-systems.com> - -config MACH_CPU9260 - bool "Eukrea CPU9260 board" - help - Select this if you are using a Eukrea Electromatique's - CPU9260 Board <http://www.eukrea.com/> - -config MACH_FLEXIBITY - bool "Flexibity Connect board" - help - Select this if you are using Flexibity Connect board - <http://www.flexibity.com> - -endif - -# ---------------------------------------------------------- - -if ARCH_AT91SAM9261 - -comment "AT91SAM9261 Board Type" - -config MACH_AT91SAM9261EK - bool "Atmel AT91SAM9261-EK Evaluation Kit" - select HAVE_AT91_DATAFLASH_CARD - help - Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit. - <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820> - -endif - -# ---------------------------------------------------------- - -if ARCH_AT91SAM9G10 - -comment "AT91SAM9G10 Board Type" - -config MACH_AT91SAM9G10EK - bool "Atmel AT91SAM9G10-EK Evaluation Kit" - select HAVE_AT91_DATAFLASH_CARD - help - Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit. - <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588> - -endif - -# ---------------------------------------------------------- - -if ARCH_AT91SAM9263 - -comment "AT91SAM9263 Board Type" - -config MACH_AT91SAM9263EK - bool "Atmel AT91SAM9263-EK Evaluation Kit" - select HAVE_AT91_DATAFLASH_CARD - help - Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit. - <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057> - -config MACH_USB_A9263 - bool "CALAO USB-A9263" - help - Select this if you are using a Calao Systems USB-A9263. - <http://www.calao-systems.com> - -endif - -# ---------------------------------------------------------- - -if ARCH_AT91SAM9RL - -comment "AT91SAM9RL Board Type" - -config MACH_AT91SAM9RLEK - bool "Atmel AT91SAM9RL-EK Evaluation Kit" - help - Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit. - -endif - # ---------------------------------------------------------- -if ARCH_AT91SAM9G20 - -comment "AT91SAM9G20 Board Type" - -config MACH_AT91SAM9G20EK - bool "Atmel AT91SAM9G20-EK Evaluation Kit" - select HAVE_AT91_DATAFLASH_CARD - help - Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit - that embeds only one SD/MMC slot. - -config MACH_AT91SAM9G20EK_2MMC - depends on MACH_AT91SAM9G20EK - bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots" - help - Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit - with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and - onwards. - <http://www.atmel.com/tools/SAM9G20-EK.aspx> - -config MACH_CPU9G20 - bool "Eukrea CPU9G20 board" - help - Select this if you are using a Eukrea Electromatique's - CPU9G20 Board <http://www.eukrea.com/> - -config MACH_ACMENETUSFOXG20 - bool "Acme Systems srl FOX Board G20" - help - Select this if you are using Acme Systems - FOX Board G20 <http://www.acmesystems.it> - -config MACH_PORTUXG20 - bool "taskit PortuxG20" - help - Select this if you are using taskit's PortuxG20. - <http://www.taskit.de/en/> - -config MACH_STAMP9G20 - bool "taskit Stamp9G20 CPU module" - help - Select this if you are using taskit's Stamp9G20 CPU module on its - evaluation board. - <http://www.taskit.de/en/> - -config MACH_PCONTROL_G20 - bool "PControl G20 CPU module" - help - Select this if you are using taskit's Stamp9G20 CPU module on this - carrier board, beeing the decentralized unit of a building automation - system; featuring nvram, eth-switch, iso-rs485, display, io - -config MACH_GSIA18S - bool "GS_IA18_S board" - help - This enables support for the GS_IA18_S board - produced by GeoSIG Ltd company. This is an internet accelerograph. - <http://www.geosig.com> - -config MACH_USB_A9G20 - bool "CALAO USB-A9G20" - depends on ARCH_AT91SAM9G20 - help - Select this if you are using a Calao Systems USB-A9G20. - <http://www.calao-systems.com> - -endif - -if (ARCH_AT91SAM9260 || ARCH_AT91SAM9G20) -comment "AT91SAM9260/AT91SAM9G20 boards" - -config MACH_SNAPPER_9260 - bool "Bluewater Systems Snapper 9260/9G20 module" - help - Select this if you are using the Bluewater Systems Snapper 9260 or - Snapper 9G20 modules. - <http://www.bluewatersys.com/> -endif - -# ---------------------------------------------------------- - -if ARCH_AT91SAM9G45 - -comment "AT91SAM9G45 Board Type" - -config MACH_AT91SAM9M10G45EK - bool "Atmel AT91SAM9M10G45-EK Evaluation Kits" - help - Select this if you are using Atmel's AT91SAM9M10G45-EK Evaluation Kit. - Those boards can be populated with any SoC of AT91SAM9G45 or AT91SAM9M10 - families: AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11. - <http://www.atmel.com/tools/SAM9M10-G45-EK.aspx> - -endif - -# ---------------------------------------------------------- - -if ARCH_AT91X40 - -comment "AT91X40 Board Type" - -config MACH_AT91EB01 - bool "Atmel AT91EB01 Evaluation Kit" - help - Select this if you are using Atmel's AT91EB01 Evaluation Kit. - It is also a popular target for simulators such as GDB's - ARM simulator (commonly known as the ARMulator) and the - Skyeye simulator. - -endif - -# ---------------------------------------------------------- +source arch/arm/mach-at91/Kconfig.non_dt +endif # SOC_SAM_V4_V5 comment "Generic Board Type" @@ -492,7 +151,7 @@ config MACH_AT91RM9200_DT Select this if you want to experiment device-tree with an Atmel RM9200 Evaluation Kit. -config MACH_AT91SAM_DT +config MACH_AT91SAM9_DT bool "Atmel AT91SAM Evaluation Kits with device-tree support" depends on SOC_AT91SAM9 select USE_OF @@ -500,15 +159,13 @@ config MACH_AT91SAM_DT Select this if you want to experiment device-tree with an Atmel Evaluation Kit. -# ---------------------------------------------------------- - -comment "AT91 Board Options" - -config MTD_AT91_DATAFLASH_CARD - bool "Enable DataFlash Card support" - depends on HAVE_AT91_DATAFLASH_CARD +config MACH_SAMA5_DT + bool "Atmel SAMA5 Evaluation Kits with device-tree support" + depends on SOC_SAMA5 + select USE_OF help - Enable support for the DataFlash card. + Select this if you want to experiment device-tree with + an Atmel Evaluation Kit. # ---------------------------------------------------------- diff --git a/arch/arm/mach-at91/Kconfig.non_dt b/arch/arm/mach-at91/Kconfig.non_dt new file mode 100644 index 000000000000..6c24985515a2 --- /dev/null +++ b/arch/arm/mach-at91/Kconfig.non_dt @@ -0,0 +1,399 @@ +menu "Atmel Non-DT world" + +config HAVE_AT91_DATAFLASH_CARD + bool + +choice + prompt "Atmel AT91 Processor Devices for non DT boards" + +config ARCH_AT91_NONE + bool "None" + +config ARCH_AT91RM9200 + bool "AT91RM9200" + select SOC_AT91RM9200 + +config ARCH_AT91SAM9260 + bool "AT91SAM9260 or AT91SAM9XE" + select SOC_AT91SAM9260 + +config ARCH_AT91SAM9261 + bool "AT91SAM9261" + select SOC_AT91SAM9261 + +config ARCH_AT91SAM9G10 + bool "AT91SAM9G10" + select SOC_AT91SAM9261 + +config ARCH_AT91SAM9263 + bool "AT91SAM9263" + select SOC_AT91SAM9263 + +config ARCH_AT91SAM9RL + bool "AT91SAM9RL" + select SOC_AT91SAM9RL + +config ARCH_AT91SAM9G20 + bool "AT91SAM9G20" + select SOC_AT91SAM9260 + +config ARCH_AT91SAM9G45 + bool "AT91SAM9G45" + select SOC_AT91SAM9G45 + +config ARCH_AT91X40 + bool "AT91x40" + depends on !MMU + select ARCH_USES_GETTIMEOFFSET + select MULTI_IRQ_HANDLER + select SPARSE_IRQ + +endchoice + +# ---------------------------------------------------------- + +if ARCH_AT91RM9200 + +comment "AT91RM9200 Board Type" + +config MACH_ONEARM + bool "Ajeco 1ARM Single Board Computer" + help + Select this if you are using Ajeco's 1ARM Single Board Computer. + <http://www.ajeco.fi/> + +config ARCH_AT91RM9200DK + bool "Atmel AT91RM9200-DK Development board" + select HAVE_AT91_DATAFLASH_CARD + help + Select this if you are using Atmel's AT91RM9200-DK Development board. + (Discontinued) + +config MACH_AT91RM9200EK + bool "Atmel AT91RM9200-EK Evaluation Kit" + select HAVE_AT91_DATAFLASH_CARD + help + Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit. + <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507> + +config MACH_CSB337 + bool "Cogent CSB337" + help + Select this if you are using Cogent's CSB337 board. + <http://www.cogcomp.com/csb_csb337.htm> + +config MACH_CSB637 + bool "Cogent CSB637" + help + Select this if you are using Cogent's CSB637 board. + <http://www.cogcomp.com/csb_csb637.htm> + +config MACH_CARMEVA + bool "Conitec ARM&EVA" + help + Select this if you are using Conitec's AT91RM9200-MCU-Module. + <http://www.conitec.net/english/linuxboard.php> + +config MACH_ATEB9200 + bool "Embest ATEB9200" + help + Select this if you are using Embest's ATEB9200 board. + <http://www.embedinfo.com/english/product/ATEB9200.asp> + +config MACH_KB9200 + bool "KwikByte KB920x" + help + Select this if you are using KwikByte's KB920x board. + <http://www.kwikbyte.com/KB9202.html> + +config MACH_PICOTUX2XX + bool "picotux 200" + help + Select this if you are using a picotux 200. + <http://www.picotux.com/> + +config MACH_KAFA + bool "Sperry-Sun KAFA board" + help + Select this if you are using Sperry-Sun's KAFA board. + +config MACH_ECBAT91 + bool "emQbit ECB_AT91 SBC" + select HAVE_AT91_DATAFLASH_CARD + help + Select this if you are using emQbit's ECB_AT91 board. + <http://wiki.emqbit.com/free-ecb-at91> + +config MACH_YL9200 + bool "ucDragon YL-9200" + help + Select this if you are using the ucDragon YL-9200 board. + +config MACH_CPUAT91 + bool "Eukrea CPUAT91" + help + Select this if you are using the Eukrea Electromatique's + CPUAT91 board <http://www.eukrea.com/>. + +config MACH_ECO920 + bool "eco920" + help + Select this if you are using the eco920 board + +config MACH_RSI_EWS + bool "RSI Embedded Webserver" + depends on ARCH_AT91RM9200 + help + Select this if you are using RSIs EWS board. +endif + +# ---------------------------------------------------------- + +if ARCH_AT91SAM9260 + +comment "AT91SAM9260 Variants" + +comment "AT91SAM9260 / AT91SAM9XE Board Type" + +config MACH_AT91SAM9260EK + bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit" + select HAVE_AT91_DATAFLASH_CARD + help + Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit + <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933> + +config MACH_CAM60 + bool "KwikByte KB9260 (CAM60) board" + help + Select this if you are using KwikByte's KB9260 (CAM60) board based on the Atmel AT91SAM9260. + <http://www.kwikbyte.com/KB9260.html> + +config MACH_SAM9_L9260 + bool "Olimex SAM9-L9260 board" + select HAVE_AT91_DATAFLASH_CARD + help + Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260. + <http://www.olimex.com/dev/sam9-L9260.html> + +config MACH_AFEB9260 + bool "Custom afeb9260 board v1" + help + Select this if you are using custom afeb9260 board based on + open hardware design. Select this for revision 1 of the board. + <svn://194.85.238.22/home/users/george/svn/arm9eb> + <http://groups.google.com/group/arm9fpga-evolution-board> + +config MACH_USB_A9260 + bool "CALAO USB-A9260" + help + Select this if you are using a Calao Systems USB-A9260. + <http://www.calao-systems.com> + +config MACH_QIL_A9260 + bool "CALAO QIL-A9260 board" + help + Select this if you are using a Calao Systems QIL-A9260 Board. + <http://www.calao-systems.com> + +config MACH_CPU9260 + bool "Eukrea CPU9260 board" + help + Select this if you are using a Eukrea Electromatique's + CPU9260 Board <http://www.eukrea.com/> + +config MACH_FLEXIBITY + bool "Flexibity Connect board" + help + Select this if you are using Flexibity Connect board + <http://www.flexibity.com> + +endif + +# ---------------------------------------------------------- + +if ARCH_AT91SAM9261 + +comment "AT91SAM9261 Board Type" + +config MACH_AT91SAM9261EK + bool "Atmel AT91SAM9261-EK Evaluation Kit" + select HAVE_AT91_DATAFLASH_CARD + help + Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit. + <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820> + +endif + +# ---------------------------------------------------------- + +if ARCH_AT91SAM9G10 + +comment "AT91SAM9G10 Board Type" + +config MACH_AT91SAM9G10EK + bool "Atmel AT91SAM9G10-EK Evaluation Kit" + select HAVE_AT91_DATAFLASH_CARD + help + Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit. + <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588> + +endif + +# ---------------------------------------------------------- + +if ARCH_AT91SAM9263 + +comment "AT91SAM9263 Board Type" + +config MACH_AT91SAM9263EK + bool "Atmel AT91SAM9263-EK Evaluation Kit" + select HAVE_AT91_DATAFLASH_CARD + help + Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit. + <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057> + +config MACH_USB_A9263 + bool "CALAO USB-A9263" + help + Select this if you are using a Calao Systems USB-A9263. + <http://www.calao-systems.com> + +endif + +# ---------------------------------------------------------- + +if ARCH_AT91SAM9RL + +comment "AT91SAM9RL Board Type" + +config MACH_AT91SAM9RLEK + bool "Atmel AT91SAM9RL-EK Evaluation Kit" + help + Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit. + +endif + +# ---------------------------------------------------------- + +if ARCH_AT91SAM9G20 + +comment "AT91SAM9G20 Board Type" + +config MACH_AT91SAM9G20EK + bool "Atmel AT91SAM9G20-EK Evaluation Kit" + select HAVE_AT91_DATAFLASH_CARD + help + Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit + that embeds only one SD/MMC slot. + +config MACH_AT91SAM9G20EK_2MMC + depends on MACH_AT91SAM9G20EK + bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots" + help + Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit + with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and + onwards. + <http://www.atmel.com/tools/SAM9G20-EK.aspx> + +config MACH_CPU9G20 + bool "Eukrea CPU9G20 board" + help + Select this if you are using a Eukrea Electromatique's + CPU9G20 Board <http://www.eukrea.com/> + +config MACH_ACMENETUSFOXG20 + bool "Acme Systems srl FOX Board G20" + help + Select this if you are using Acme Systems + FOX Board G20 <http://www.acmesystems.it> + +config MACH_PORTUXG20 + bool "taskit PortuxG20" + help + Select this if you are using taskit's PortuxG20. + <http://www.taskit.de/en/> + +config MACH_STAMP9G20 + bool "taskit Stamp9G20 CPU module" + help + Select this if you are using taskit's Stamp9G20 CPU module on its + evaluation board. + <http://www.taskit.de/en/> + +config MACH_PCONTROL_G20 + bool "PControl G20 CPU module" + help + Select this if you are using taskit's Stamp9G20 CPU module on this + carrier board, beeing the decentralized unit of a building automation + system; featuring nvram, eth-switch, iso-rs485, display, io + +config MACH_GSIA18S + bool "GS_IA18_S board" + help + This enables support for the GS_IA18_S board + produced by GeoSIG Ltd company. This is an internet accelerograph. + <http://www.geosig.com> + +config MACH_USB_A9G20 + bool "CALAO USB-A9G20" + depends on ARCH_AT91SAM9G20 + help + Select this if you are using a Calao Systems USB-A9G20. + <http://www.calao-systems.com> + +endif + +if (ARCH_AT91SAM9260 || ARCH_AT91SAM9G20) +comment "AT91SAM9260/AT91SAM9G20 boards" + +config MACH_SNAPPER_9260 + bool "Bluewater Systems Snapper 9260/9G20 module" + help + Select this if you are using the Bluewater Systems Snapper 9260 or + Snapper 9G20 modules. + <http://www.bluewatersys.com/> +endif + +# ---------------------------------------------------------- + +if ARCH_AT91SAM9G45 + +comment "AT91SAM9G45 Board Type" + +config MACH_AT91SAM9M10G45EK + bool "Atmel AT91SAM9M10G45-EK Evaluation Kits" + help + Select this if you are using Atmel's AT91SAM9M10G45-EK Evaluation Kit. + Those boards can be populated with any SoC of AT91SAM9G45 or AT91SAM9M10 + families: AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11. + <http://www.atmel.com/tools/SAM9M10-G45-EK.aspx> + +endif + +# ---------------------------------------------------------- + +if ARCH_AT91X40 + +comment "AT91X40 Board Type" + +config MACH_AT91EB01 + bool "Atmel AT91EB01 Evaluation Kit" + help + Select this if you are using Atmel's AT91EB01 Evaluation Kit. + It is also a popular target for simulators such as GDB's + ARM simulator (commonly known as the ARMulator) and the + Skyeye simulator. + +endif + +# ---------------------------------------------------------- + +comment "AT91 Board Options" + +config MTD_AT91_DATAFLASH_CARD + bool "Enable DataFlash Card support" + depends on HAVE_AT91_DATAFLASH_CARD + help + Enable support for the DataFlash card. + +endmenu diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 39218ca6d8e8..788562dccb43 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -10,7 +10,8 @@ obj- := obj-$(CONFIG_AT91_PMC_UNIT) += clock.o obj-$(CONFIG_AT91_SAM9_ALT_RESET) += at91sam9_alt_reset.o obj-$(CONFIG_AT91_SAM9G45_RESET) += at91sam9g45_reset.o -obj-$(CONFIG_SOC_AT91SAM9) += at91sam926x_time.o sam9_smc.o +obj-$(CONFIG_AT91_SAM9_TIME) += at91sam926x_time.o +obj-$(CONFIG_SOC_AT91SAM9) += sam9_smc.o # CPU-specific support obj-$(CONFIG_SOC_AT91RM9200) += at91rm9200.o at91rm9200_time.o @@ -21,6 +22,7 @@ obj-$(CONFIG_SOC_AT91SAM9G45) += at91sam9g45.o obj-$(CONFIG_SOC_AT91SAM9N12) += at91sam9n12.o obj-$(CONFIG_SOC_AT91SAM9X5) += at91sam9x5.o obj-$(CONFIG_SOC_AT91SAM9RL) += at91sam9rl.o +obj-$(CONFIG_SOC_SAMA5D3) += sama5d3.o obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200_devices.o obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260_devices.o @@ -87,8 +89,11 @@ obj-$(CONFIG_MACH_SNAPPER_9260) += board-snapper9260.o obj-$(CONFIG_MACH_AT91SAM9M10G45EK) += board-sam9m10g45ek.o # AT91SAM board with device-tree -obj-$(CONFIG_MACH_AT91RM9200_DT) += board-rm9200-dt.o -obj-$(CONFIG_MACH_AT91SAM_DT) += board-dt.o +obj-$(CONFIG_MACH_AT91RM9200_DT) += board-dt-rm9200.o +obj-$(CONFIG_MACH_AT91SAM9_DT) += board-dt-sam9.o + +# SAMA5 board with device-tree +obj-$(CONFIG_MACH_SAMA5_DT) += board-dt-sama5.o # AT91X40 board-specific support obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o diff --git a/arch/arm/mach-at91/at91_rstc.h b/arch/arm/mach-at91/at91_rstc.h index 875fa336800b..a600e6992920 100644 --- a/arch/arm/mach-at91/at91_rstc.h +++ b/arch/arm/mach-at91/at91_rstc.h @@ -23,7 +23,7 @@ extern void __iomem *at91_rstc_base; __raw_readl(at91_rstc_base + field) #define at91_rstc_write(field, value) \ - __raw_writel(value, at91_rstc_base + field); + __raw_writel(value, at91_rstc_base + field) #else .extern at91_rstc_base #endif diff --git a/arch/arm/mach-at91/at91_shdwc.h b/arch/arm/mach-at91/at91_shdwc.h index 60478ea8bd46..9e29f31ec9a6 100644 --- a/arch/arm/mach-at91/at91_shdwc.h +++ b/arch/arm/mach-at91/at91_shdwc.h @@ -23,7 +23,7 @@ extern void __iomem *at91_shdwc_base; __raw_readl(at91_shdwc_base + field) #define at91_shdwc_write(field, value) \ - __raw_writel(value, at91_shdwc_base + field); + __raw_writel(value, at91_shdwc_base + field) #endif #define AT91_SHDW_CR 0x00 /* Shut Down Control Register */ diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index 9706c000f294..d193a409bc45 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -212,6 +212,7 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("t2_clk", "fffa4000.timer", &tc5_clk), CLKDEV_CON_DEV_ID("mci_clk", "fffb4000.mmc", &mmc_clk), CLKDEV_CON_DEV_ID("emac_clk", "fffbc000.ethernet", ðer_clk), + CLKDEV_CON_DEV_ID(NULL, "fffb8000.i2c", &twi_clk), CLKDEV_CON_DEV_ID("hclk", "300000.ohci", &ohci_clk), CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioA_clk), CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioB_clk), @@ -384,7 +385,7 @@ static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = { 0 /* Advanced Interrupt Controller (IRQ6) */ }; -AT91_SOC_START(rm9200) +AT91_SOC_START(at91rm9200) .map_io = at91rm9200_map_io, .default_irq_priority = at91rm9200_default_irq_priority, .ioremap_registers = at91rm9200_ioremap_registers, diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index b67cd5374117..a8ce24538da6 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -232,6 +232,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("t2_clk", "fffdc000.timer", &tc5_clk), CLKDEV_CON_DEV_ID("hclk", "500000.ohci", &ohci_clk), CLKDEV_CON_DEV_ID("mci_clk", "fffa8000.mmc", &mmc_clk), + CLKDEV_CON_DEV_ID("spi_clk", "fffc8000.spi", &spi0_clk), + CLKDEV_CON_DEV_ID("spi_clk", "fffcc000.spi", &spi1_clk), /* fake hclk clock */ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk), CLKDEV_CON_ID("pioA", &pioA_clk), @@ -395,7 +397,7 @@ static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller */ }; -AT91_SOC_START(sam9260) +AT91_SOC_START(at91sam9260) .map_io = at91sam9260_map_io, .default_irq_priority = at91sam9260_default_irq_priority, .ioremap_registers = at91sam9260_ioremap_registers, diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index 2998a08afc2d..25efb5ac30f1 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -169,6 +169,8 @@ static struct clk *periph_clocks[] __initdata = { }; static struct clk_lookup periph_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("hclk", "at91sam9261-lcdfb.0", &hck1), + CLKDEV_CON_DEV_ID("hclk", "at91sam9g10-lcdfb.0", &hck1), CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk), @@ -337,7 +339,7 @@ static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller */ }; -AT91_SOC_START(sam9261) +AT91_SOC_START(at91sam9261) .map_io = at91sam9261_map_io, .default_irq_priority = at91sam9261_default_irq_priority, .ioremap_registers = at91sam9261_ioremap_registers, diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 92e0f861084a..629ea5fc95cf 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -488,7 +488,6 @@ static struct resource lcdc_resources[] = { }; static struct platform_device at91_lcdc_device = { - .name = "atmel_lcdfb", .id = 0, .dev = { .dma_mask = &lcdc_dmamask, @@ -505,6 +504,11 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) return; } + if (cpu_is_at91sam9g10()) + at91_lcdc_device.name = "at91sam9g10-lcdfb"; + else + at91_lcdc_device.name = "at91sam9261-lcdfb"; + #if defined(CONFIG_FB_ATMEL_STN) at91_set_A_periph(AT91_PIN_PB0, 0); /* LCDVSYNC */ at91_set_A_periph(AT91_PIN_PB1, 0); /* LCDHSYNC */ diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index b9fc60d1b33a..f44ffd2105a7 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -190,6 +190,7 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.1", &ssc1_clk), CLKDEV_CON_DEV_ID("pclk", "fff98000.ssc", &ssc0_clk), CLKDEV_CON_DEV_ID("pclk", "fff9c000.ssc", &ssc1_clk), + CLKDEV_CON_DEV_ID("hclk", "at91sam9263-lcdfb.0", &lcdc_clk), CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.0", &mmc0_clk), CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.1", &mmc1_clk), CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), @@ -374,7 +375,7 @@ static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller (IRQ1) */ }; -AT91_SOC_START(sam9263) +AT91_SOC_START(at91sam9263) .map_io = at91sam9263_map_io, .default_irq_priority = at91sam9263_default_irq_priority, .ioremap_registers = at91sam9263_ioremap_registers, diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index ed666f5cb01d..858c8aac2daf 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -848,7 +848,7 @@ static struct resource lcdc_resources[] = { }; static struct platform_device at91_lcdc_device = { - .name = "atmel_lcdfb", + .name = "at91sam9263-lcdfb", .id = 0, .dev = { .dma_mask = &lcdc_dmamask, diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index d3addee43d8d..8b7fce067652 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -228,6 +228,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_ID("hclk", &macb_clk), /* One additional fake clock for ohci */ CLKDEV_CON_ID("ohci_clk", &uhphs_clk), + CLKDEV_CON_DEV_ID("hclk", "at91sam9g45-lcdfb.0", &lcdc_clk), + CLKDEV_CON_DEV_ID("hclk", "at91sam9g45es-lcdfb.0", &lcdc_clk), CLKDEV_CON_DEV_ID("ehci_clk", "atmel-ehci", &uhphs_clk), CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk), CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk), @@ -262,6 +264,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("mci_clk", "fffd0000.mmc", &mmc1_clk), CLKDEV_CON_DEV_ID(NULL, "fff84000.i2c", &twi0_clk), CLKDEV_CON_DEV_ID(NULL, "fff88000.i2c", &twi1_clk), + CLKDEV_CON_DEV_ID("spi_clk", "fffa4000.spi", &spi0_clk), + CLKDEV_CON_DEV_ID("spi_clk", "fffa8000.spi", &spi1_clk), /* fake hclk clock */ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &uhphs_clk), CLKDEV_CON_DEV_ID(NULL, "fffff200.gpio", &pioA_clk), @@ -418,7 +422,7 @@ static unsigned int at91sam9g45_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller (IRQ0) */ }; -AT91_SOC_START(sam9g45) +AT91_SOC_START(at91sam9g45) .map_io = at91sam9g45_map_io, .default_irq_priority = at91sam9g45_default_irq_priority, .ioremap_registers = at91sam9g45_ioremap_registers, diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index 827c9f2a70fb..acb703e13331 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -18,7 +18,7 @@ #include <linux/platform_device.h> #include <linux/i2c-gpio.h> #include <linux/atmel-mci.h> -#include <linux/platform_data/atmel-aes.h> +#include <linux/platform_data/crypto-atmel.h> #include <linux/platform_data/at91_adc.h> @@ -981,7 +981,6 @@ static struct resource lcdc_resources[] = { }; static struct platform_device at91_lcdc_device = { - .name = "atmel_lcdfb", .id = 0, .dev = { .dma_mask = &lcdc_dmamask, @@ -997,6 +996,11 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) if (!data) return; + if (cpu_is_at91sam9g45es()) + at91_lcdc_device.name = "at91sam9g45es-lcdfb"; + else + at91_lcdc_device.name = "at91sam9g45-lcdfb"; + at91_set_A_periph(AT91_PIN_PE0, 0); /* LCDDPWR */ at91_set_A_periph(AT91_PIN_PE2, 0); /* LCDCC */ @@ -1900,7 +1904,8 @@ static void __init at91_add_device_tdes(void) {} * -------------------------------------------------------------------- */ #if defined(CONFIG_CRYPTO_DEV_ATMEL_AES) || defined(CONFIG_CRYPTO_DEV_ATMEL_AES_MODULE) -static struct aes_platform_data aes_data; +static struct crypto_platform_data aes_data; +static struct crypto_dma_data alt_atslave; static u64 aes_dmamask = DMA_BIT_MASK(32); static struct resource aes_resources[] = { @@ -1931,23 +1936,20 @@ static struct platform_device at91sam9g45_aes_device = { static void __init at91_add_device_aes(void) { struct at_dma_slave *atslave; - struct aes_dma_data *alt_atslave; - - alt_atslave = kzalloc(sizeof(struct aes_dma_data), GFP_KERNEL); /* DMA TX slave channel configuration */ - atslave = &alt_atslave->txdata; + atslave = &alt_atslave.txdata; atslave->dma_dev = &at_hdmac_device.dev; atslave->cfg = ATC_FIFOCFG_ENOUGHSPACE | ATC_SRC_H2SEL_HW | ATC_SRC_PER(AT_DMA_ID_AES_RX); /* DMA RX slave channel configuration */ - atslave = &alt_atslave->rxdata; + atslave = &alt_atslave.rxdata; atslave->dma_dev = &at_hdmac_device.dev; atslave->cfg = ATC_FIFOCFG_ENOUGHSPACE | ATC_DST_H2SEL_HW | ATC_DST_PER(AT_DMA_ID_AES_TX); - aes_data.dma_slave = alt_atslave; + aes_data.dma_slave = &alt_atslave; platform_device_register(&at91sam9g45_aes_device); } #else diff --git a/arch/arm/mach-at91/at91sam9n12.c b/arch/arm/mach-at91/at91sam9n12.c index 5dfc8fd87103..13cdbcd48f51 100644 --- a/arch/arm/mach-at91/at91sam9n12.c +++ b/arch/arm/mach-at91/at91sam9n12.c @@ -172,6 +172,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("dma_clk", "ffffec00.dma-controller", &dma_clk), CLKDEV_CON_DEV_ID(NULL, "f8010000.i2c", &twi0_clk), CLKDEV_CON_DEV_ID(NULL, "f8014000.i2c", &twi1_clk), + CLKDEV_CON_DEV_ID("spi_clk", "f0000000.spi", &spi0_clk), + CLKDEV_CON_DEV_ID("spi_clk", "f0004000.spi", &spi1_clk), CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioAB_clk), CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioAB_clk), CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioCD_clk), @@ -226,7 +228,7 @@ void __init at91sam9n12_initialize(void) at91_extern_irq = (1 << AT91SAM9N12_ID_IRQ0); } -AT91_SOC_START(sam9n12) +AT91_SOC_START(at91sam9n12) .map_io = at91sam9n12_map_io, .register_clocks = at91sam9n12_register_clocks, .init = at91sam9n12_initialize, diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index eb98704db2d9..f77fae5591bc 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -179,6 +179,7 @@ static struct clk *periph_clocks[] __initdata = { }; static struct clk_lookup periph_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("hclk", "at91sam9rl-lcdfb.0", &lcdc_clk), CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk), CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk), CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk), @@ -340,7 +341,7 @@ static unsigned int at91sam9rl_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller */ }; -AT91_SOC_START(sam9rl) +AT91_SOC_START(at91sam9rl) .map_io = at91sam9rl_map_io, .default_irq_priority = at91sam9rl_default_irq_priority, .ioremap_registers = at91sam9rl_ioremap_registers, diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index ddf223ff35c4..352468f265a9 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -514,7 +514,7 @@ static struct resource lcdc_resources[] = { }; static struct platform_device at91_lcdc_device = { - .name = "atmel_lcdfb", + .name = "at91sam9rl-lcdfb", .id = 0, .dev = { .dma_mask = &lcdc_dmamask, diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c index 44a9a62dcc13..e631fec040ce 100644 --- a/arch/arm/mach-at91/at91sam9x5.c +++ b/arch/arm/mach-at91/at91sam9x5.c @@ -237,6 +237,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID(NULL, "f8010000.i2c", &twi0_clk), CLKDEV_CON_DEV_ID(NULL, "f8014000.i2c", &twi1_clk), CLKDEV_CON_DEV_ID(NULL, "f8018000.i2c", &twi2_clk), + CLKDEV_CON_DEV_ID("spi_clk", "f0000000.spi", &spi0_clk), + CLKDEV_CON_DEV_ID("spi_clk", "f0004000.spi", &spi1_clk), CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioAB_clk), CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioAB_clk), CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioCD_clk), @@ -320,7 +322,7 @@ static void __init at91sam9x5_map_io(void) * Interrupt initialization * -------------------------------------------------------------------- */ -AT91_SOC_START(sam9x5) +AT91_SOC_START(at91sam9x5) .map_io = at91sam9x5_map_io, .register_clocks = at91sam9x5_register_clocks, AT91_SOC_END diff --git a/arch/arm/mach-at91/at91x40_time.c b/arch/arm/mach-at91/at91x40_time.c index 0c07a4459cb2..2919eba41ff4 100644 --- a/arch/arm/mach-at91/at91x40_time.c +++ b/arch/arm/mach-at91/at91x40_time.c @@ -33,7 +33,7 @@ __raw_readl(AT91_IO_P2V(AT91_TC) + field) #define at91_tc_write(field, value) \ - __raw_writel(value, AT91_IO_P2V(AT91_TC) + field); + __raw_writel(value, AT91_IO_P2V(AT91_TC) + field) /* * 3 counter/timer units present. diff --git a/arch/arm/mach-at91/board-rm9200-dt.c b/arch/arm/mach-at91/board-dt-rm9200.c index 3fcb6623a33e..3fcb6623a33e 100644 --- a/arch/arm/mach-at91/board-rm9200-dt.c +++ b/arch/arm/mach-at91/board-dt-rm9200.c diff --git a/arch/arm/mach-at91/board-dt.c b/arch/arm/mach-at91/board-dt-sam9.c index 8db30132abed..8db30132abed 100644 --- a/arch/arm/mach-at91/board-dt.c +++ b/arch/arm/mach-at91/board-dt-sam9.c diff --git a/arch/arm/mach-at91/board-dt-sama5.c b/arch/arm/mach-at91/board-dt-sama5.c new file mode 100644 index 000000000000..705305e62bbc --- /dev/null +++ b/arch/arm/mach-at91/board-dt-sama5.c @@ -0,0 +1,86 @@ +/* + * Setup code for SAMA5 Evaluation Kits with Device Tree support + * + * Copyright (C) 2013 Atmel, + * 2013 Ludovic Desroches <ludovic.desroches@atmel.com> + * + * Licensed under GPLv2 or later. + */ + +#include <linux/types.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/gpio.h> +#include <linux/micrel_phy.h> +#include <linux/of.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <linux/phy.h> + +#include <asm/setup.h> +#include <asm/irq.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include "at91_aic.h" +#include "generic.h" + + +static const struct of_device_id irq_of_match[] __initconst = { + + { .compatible = "atmel,sama5d3-aic", .data = at91_aic5_of_init }, + { /*sentinel*/ } +}; + +static void __init at91_dt_init_irq(void) +{ + of_irq_init(irq_of_match); +} + +static int ksz9021rn_phy_fixup(struct phy_device *phy) +{ + int value; + +#define GMII_RCCPSR 260 +#define GMII_RRDPSR 261 +#define GMII_ERCR 11 +#define GMII_ERDWR 12 + + /* Set delay values */ + value = GMII_RCCPSR | 0x8000; + phy_write(phy, GMII_ERCR, value); + value = 0xF2F4; + phy_write(phy, GMII_ERDWR, value); + value = GMII_RRDPSR | 0x8000; + phy_write(phy, GMII_ERCR, value); + value = 0x2222; + phy_write(phy, GMII_ERDWR, value); + + return 0; +} + +static void __init sama5_dt_device_init(void) +{ + if (of_machine_is_compatible("atmel,sama5d3xcm")) + phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK, + ksz9021rn_phy_fixup); + + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); +} + +static const char *sama5_dt_board_compat[] __initdata = { + "atmel,sama5", + NULL +}; + +DT_MACHINE_START(sama5_dt, "Atmel SAMA5 (Device Tree)") + /* Maintainer: Atmel */ + .init_time = at91sam926x_pit_init, + .map_io = at91_map_io, + .handle_irq = at91_aic5_handle_irq, + .init_early = at91_dt_initialize, + .init_irq = at91_dt_init_irq, + .init_machine = sama5_dt_device_init, + .dt_compat = sama5_dt_board_compat, +MACHINE_END diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c index 33361505c0cd..da841885d01c 100644 --- a/arch/arm/mach-at91/clock.c +++ b/arch/arm/mach-at91/clock.c @@ -54,7 +54,10 @@ EXPORT_SYMBOL_GPL(at91_pmc_base); */ #define cpu_has_utmi() ( cpu_is_at91sam9rl() \ || cpu_is_at91sam9g45() \ - || cpu_is_at91sam9x5()) + || cpu_is_at91sam9x5() \ + || cpu_is_sama5d3()) + +#define cpu_has_1056M_plla() (cpu_is_sama5d3()) #define cpu_has_800M_plla() ( cpu_is_at91sam9g20() \ || cpu_is_at91sam9g45() \ @@ -75,7 +78,8 @@ EXPORT_SYMBOL_GPL(at91_pmc_base); || cpu_is_at91sam9n12())) #define cpu_has_upll() (cpu_is_at91sam9g45() \ - || cpu_is_at91sam9x5()) + || cpu_is_at91sam9x5() \ + || cpu_is_sama5d3()) /* USB host HS & FS */ #define cpu_has_uhp() (!cpu_is_at91sam9rl()) @@ -83,18 +87,22 @@ EXPORT_SYMBOL_GPL(at91_pmc_base); /* USB device FS only */ #define cpu_has_udpfs() (!(cpu_is_at91sam9rl() \ || cpu_is_at91sam9g45() \ - || cpu_is_at91sam9x5())) + || cpu_is_at91sam9x5() \ + || cpu_is_sama5d3())) #define cpu_has_plladiv2() (cpu_is_at91sam9g45() \ || cpu_is_at91sam9x5() \ - || cpu_is_at91sam9n12()) + || cpu_is_at91sam9n12() \ + || cpu_is_sama5d3()) #define cpu_has_mdiv3() (cpu_is_at91sam9g45() \ || cpu_is_at91sam9x5() \ - || cpu_is_at91sam9n12()) + || cpu_is_at91sam9n12() \ + || cpu_is_sama5d3()) #define cpu_has_alt_prescaler() (cpu_is_at91sam9x5() \ - || cpu_is_at91sam9n12()) + || cpu_is_at91sam9n12() \ + || cpu_is_sama5d3()) static LIST_HEAD(clocks); static DEFINE_SPINLOCK(clk_lock); @@ -210,10 +218,26 @@ struct clk mck = { static void pmc_periph_mode(struct clk *clk, int is_on) { - if (is_on) - at91_pmc_write(AT91_PMC_PCER, clk->pmc_mask); - else - at91_pmc_write(AT91_PMC_PCDR, clk->pmc_mask); + u32 regval = 0; + + /* + * With sama5d3 devices, we are managing clock division so we have to + * use the Peripheral Control Register introduced from at91sam9x5 + * devices. + */ + if (cpu_is_sama5d3()) { + regval |= AT91_PMC_PCR_CMD; /* write command */ + regval |= clk->pid & AT91_PMC_PCR_PID; /* peripheral selection */ + regval |= AT91_PMC_PCR_DIV(clk->div); + if (is_on) + regval |= AT91_PMC_PCR_EN; /* enable clock */ + at91_pmc_write(AT91_PMC_PCR, regval); + } else { + if (is_on) + at91_pmc_write(AT91_PMC_PCER, clk->pmc_mask); + else + at91_pmc_write(AT91_PMC_PCDR, clk->pmc_mask); + } } static struct clk __init *at91_css_to_clk(unsigned long css) @@ -443,14 +467,18 @@ static void __init init_programmable_clock(struct clk *clk) static int at91_clk_show(struct seq_file *s, void *unused) { - u32 scsr, pcsr, uckr = 0, sr; + u32 scsr, pcsr, pcsr1 = 0, uckr = 0, sr; struct clk *clk; scsr = at91_pmc_read(AT91_PMC_SCSR); pcsr = at91_pmc_read(AT91_PMC_PCSR); + if (cpu_is_sama5d3()) + pcsr1 = at91_pmc_read(AT91_PMC_PCSR1); sr = at91_pmc_read(AT91_PMC_SR); seq_printf(s, "SCSR = %8x\n", scsr); seq_printf(s, "PCSR = %8x\n", pcsr); + if (cpu_is_sama5d3()) + seq_printf(s, "PCSR1 = %8x\n", pcsr1); seq_printf(s, "MOR = %8x\n", at91_pmc_read(AT91_CKGR_MOR)); seq_printf(s, "MCFR = %8x\n", at91_pmc_read(AT91_CKGR_MCFR)); seq_printf(s, "PLLA = %8x\n", at91_pmc_read(AT91_CKGR_PLLAR)); @@ -470,20 +498,30 @@ static int at91_clk_show(struct seq_file *s, void *unused) list_for_each_entry(clk, &clocks, node) { char *state; - if (clk->mode == pmc_sys_mode) + if (clk->mode == pmc_sys_mode) { state = (scsr & clk->pmc_mask) ? "on" : "off"; - else if (clk->mode == pmc_periph_mode) - state = (pcsr & clk->pmc_mask) ? "on" : "off"; - else if (clk->mode == pmc_uckr_mode) + } else if (clk->mode == pmc_periph_mode) { + if (cpu_is_sama5d3()) { + u32 pmc_mask = 1 << (clk->pid % 32); + + if (clk->pid > 31) + state = (pcsr1 & pmc_mask) ? "on" : "off"; + else + state = (pcsr & pmc_mask) ? "on" : "off"; + } else { + state = (pcsr & clk->pmc_mask) ? "on" : "off"; + } + } else if (clk->mode == pmc_uckr_mode) { state = (uckr & clk->pmc_mask) ? "on" : "off"; - else if (clk->pmc_mask) + } else if (clk->pmc_mask) { state = (sr & clk->pmc_mask) ? "on" : "off"; - else if (clk == &clk32k || clk == &main_clk) + } else if (clk == &clk32k || clk == &main_clk) { state = "on"; - else + } else { state = ""; + } - seq_printf(s, "%-10s users=%2d %-3s %9ld Hz %s\n", + seq_printf(s, "%-10s users=%2d %-3s %9lu Hz %s\n", clk->name, clk->users, state, clk_get_rate(clk), clk->parent ? clk->parent->name : ""); } @@ -530,6 +568,9 @@ int __init clk_register(struct clk *clk) if (clk_is_peripheral(clk)) { if (!clk->parent) clk->parent = &mck; + if (cpu_is_sama5d3()) + clk->rate_hz = DIV_ROUND_UP(clk->parent->rate_hz, + 1 << clk->div); clk->mode = pmc_periph_mode; } else if (clk_is_sys(clk)) { @@ -555,7 +596,11 @@ static u32 __init at91_pll_rate(struct clk *pll, u32 freq, u32 reg) unsigned mul, div; div = reg & 0xff; - mul = (reg >> 16) & 0x7ff; + if (cpu_is_sama5d3()) + mul = AT91_PMC3_MUL_GET(reg); + else + mul = AT91_PMC_MUL_GET(reg); + if (div && mul) { freq /= div; freq *= mul + 1; @@ -706,12 +751,15 @@ static int __init at91_pmc_init(unsigned long main_clock) /* report if PLLA is more than mildly overclocked */ plla.rate_hz = at91_pll_rate(&plla, main_clock, at91_pmc_read(AT91_CKGR_PLLAR)); - if (cpu_has_300M_plla()) { - if (plla.rate_hz > 300000000) + if (cpu_has_1056M_plla()) { + if (plla.rate_hz > 1056000000) pll_overclock = true; } else if (cpu_has_800M_plla()) { if (plla.rate_hz > 800000000) pll_overclock = true; + } else if (cpu_has_300M_plla()) { + if (plla.rate_hz > 300000000) + pll_overclock = true; } else if (cpu_has_240M_plla()) { if (plla.rate_hz > 240000000) pll_overclock = true; @@ -872,6 +920,7 @@ int __init at91_clock_init(unsigned long main_clock) static int __init at91_clock_reset(void) { unsigned long pcdr = 0; + unsigned long pcdr1 = 0; unsigned long scdr = 0; struct clk *clk; @@ -879,8 +928,17 @@ static int __init at91_clock_reset(void) if (clk->users > 0) continue; - if (clk->mode == pmc_periph_mode) - pcdr |= clk->pmc_mask; + if (clk->mode == pmc_periph_mode) { + if (cpu_is_sama5d3()) { + u32 pmc_mask = 1 << (clk->pid % 32); + + if (clk->pid > 31) + pcdr1 |= pmc_mask; + else + pcdr |= pmc_mask; + } else + pcdr |= clk->pmc_mask; + } if (clk->mode == pmc_sys_mode) scdr |= clk->pmc_mask; @@ -888,8 +946,9 @@ static int __init at91_clock_reset(void) pr_debug("Clocks: disable unused %s\n", clk->name); } - at91_pmc_write(AT91_PMC_PCDR, pcdr); at91_pmc_write(AT91_PMC_SCDR, scdr); + if (cpu_is_sama5d3()) + at91_pmc_write(AT91_PMC_PCDR1, pcdr1); return 0; } diff --git a/arch/arm/mach-at91/clock.h b/arch/arm/mach-at91/clock.h index c2e63e47dcbe..a98a39bbd883 100644 --- a/arch/arm/mach-at91/clock.h +++ b/arch/arm/mach-at91/clock.h @@ -20,7 +20,9 @@ struct clk { const char *name; /* unique clock name */ struct clk_lookup cl; unsigned long rate_hz; + unsigned div; /* parent clock divider */ struct clk *parent; + unsigned pid; /* peripheral ID */ u32 pmc_mask; void (*mode)(struct clk *, int); unsigned id:3; /* PCK0..4, or 32k/main/a/b */ diff --git a/arch/arm/mach-at91/cpuidle.c b/arch/arm/mach-at91/cpuidle.c index 0c6381516a5a..69f9e3bbf4e5 100644 --- a/arch/arm/mach-at91/cpuidle.c +++ b/arch/arm/mach-at91/cpuidle.c @@ -27,8 +27,6 @@ #define AT91_MAX_STATES 2 -static DEFINE_PER_CPU(struct cpuidle_device, at91_cpuidle_device); - /* Actual code that puts the SoC in different idle states */ static int at91_enter_idle(struct cpuidle_device *dev, struct cpuidle_driver *drv, @@ -38,6 +36,8 @@ static int at91_enter_idle(struct cpuidle_device *dev, at91rm9200_standby(); else if (cpu_is_at91sam9g45()) at91sam9g45_standby(); + else if (cpu_is_at91sam9263()) + at91sam9263_standby(); else at91sam9_standby(); @@ -47,7 +47,6 @@ static int at91_enter_idle(struct cpuidle_device *dev, static struct cpuidle_driver at91_idle_driver = { .name = "at91_idle", .owner = THIS_MODULE, - .en_core_tk_irqen = 1, .states[0] = ARM_CPUIDLE_WFI_STATE, .states[1] = { .enter = at91_enter_idle, @@ -61,20 +60,9 @@ static struct cpuidle_driver at91_idle_driver = { }; /* Initialize CPU idle by registering the idle states */ -static int at91_init_cpuidle(void) +static int __init at91_init_cpuidle(void) { - struct cpuidle_device *device; - - device = &per_cpu(at91_cpuidle_device, smp_processor_id()); - device->state_count = AT91_MAX_STATES; - - cpuidle_register_driver(&at91_idle_driver); - - if (cpuidle_register_device(device)) { - printk(KERN_ERR "at91_init_cpuidle: Failed registering\n"); - return -EIO; - } - return 0; + return cpuidle_register(&at91_idle_driver, NULL); } device_initcall(at91_init_cpuidle); diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c index c5d7e1e9d757..a5afcf76550e 100644 --- a/arch/arm/mach-at91/gpio.c +++ b/arch/arm/mach-at91/gpio.c @@ -22,10 +22,9 @@ #include <linux/module.h> #include <linux/io.h> #include <linux/irqdomain.h> +#include <linux/irqchip/chained_irq.h> #include <linux/of_address.h> -#include <asm/mach/irq.h> - #include <mach/hardware.h> #include <mach/at91_pio.h> diff --git a/arch/arm/mach-at91/include/mach/at91_dbgu.h b/arch/arm/mach-at91/include/mach/at91_dbgu.h index 2aa0c5e13495..3b5948566e52 100644 --- a/arch/arm/mach-at91/include/mach/at91_dbgu.h +++ b/arch/arm/mach-at91/include/mach/at91_dbgu.h @@ -16,9 +16,6 @@ #ifndef AT91_DBGU_H #define AT91_DBGU_H -#define dbgu_readl(dbgu, field) \ - __raw_readl(AT91_VA_BASE_SYS + dbgu + AT91_DBGU_ ## field) - #if !defined(CONFIG_ARCH_AT91X40) #define AT91_DBGU_CR (0x00) /* Control Register */ #define AT91_DBGU_MR (0x04) /* Mode Register */ diff --git a/arch/arm/mach-at91/include/mach/at91_matrix.h b/arch/arm/mach-at91/include/mach/at91_matrix.h index 02fae9de746b..f8996c954131 100644 --- a/arch/arm/mach-at91/include/mach/at91_matrix.h +++ b/arch/arm/mach-at91/include/mach/at91_matrix.h @@ -14,7 +14,7 @@ extern void __iomem *at91_matrix_base; __raw_readl(at91_matrix_base + field) #define at91_matrix_write(field, value) \ - __raw_writel(value, at91_matrix_base + field); + __raw_writel(value, at91_matrix_base + field) #else .extern at91_matrix_base diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h index ea2c57a86ca6..31df12029c4e 100644 --- a/arch/arm/mach-at91/include/mach/at91_pmc.h +++ b/arch/arm/mach-at91/include/mach/at91_pmc.h @@ -75,6 +75,9 @@ extern void __iomem *at91_pmc_base; #define AT91_PMC_PLLCOUNT (0x3f << 8) /* PLL Counter */ #define AT91_PMC_OUT (3 << 14) /* PLL Clock Frequency Range */ #define AT91_PMC_MUL (0x7ff << 16) /* PLL Multiplier */ +#define AT91_PMC_MUL_GET(n) ((n) >> 16 & 0x7ff) +#define AT91_PMC3_MUL (0x7f << 18) /* PLL Multiplier [SAMA5 only] */ +#define AT91_PMC3_MUL_GET(n) ((n) >> 18 & 0x7f) #define AT91_PMC_USBDIV (3 << 28) /* USB Divisor (PLLB only) */ #define AT91_PMC_USBDIV_1 (0 << 28) #define AT91_PMC_USBDIV_2 (1 << 28) @@ -167,11 +170,18 @@ extern void __iomem *at91_pmc_base; #define AT91_PMC_WPVS (0x1 << 0) /* Write Protect Violation Status */ #define AT91_PMC_WPVSRC (0xffff << 8) /* Write Protect Violation Source */ -#define AT91_PMC_PCR 0x10c /* Peripheral Control Register [some SAM9] */ +#define AT91_PMC_PCER1 0x100 /* Peripheral Clock Enable Register 1 [SAMA5 only]*/ +#define AT91_PMC_PCDR1 0x104 /* Peripheral Clock Enable Register 1 */ +#define AT91_PMC_PCSR1 0x108 /* Peripheral Clock Enable Register 1 */ + +#define AT91_PMC_PCR 0x10c /* Peripheral Control Register [some SAM9 and SAMA5] */ #define AT91_PMC_PCR_PID (0x3f << 0) /* Peripheral ID */ -#define AT91_PMC_PCR_CMD (0x1 << 12) /* Command */ -#define AT91_PMC_PCR_DIV (0x3 << 16) /* Divisor Value */ -#define AT91_PMC_PCRDIV(n) (((n) << 16) & AT91_PMC_PCR_DIV) +#define AT91_PMC_PCR_CMD (0x1 << 12) /* Command (read=0, write=1) */ +#define AT91_PMC_PCR_DIV(n) ((n) << 16) /* Divisor Value */ +#define AT91_PMC_PCR_DIV0 0x0 /* Peripheral clock is MCK */ +#define AT91_PMC_PCR_DIV2 0x2 /* Peripheral clock is MCK/2 */ +#define AT91_PMC_PCR_DIV4 0x4 /* Peripheral clock is MCK/4 */ +#define AT91_PMC_PCR_DIV8 0x8 /* Peripheral clock is MCK/8 */ #define AT91_PMC_PCR_EN (0x1 << 28) /* Enable */ #endif diff --git a/arch/arm/mach-at91/include/mach/at91_st.h b/arch/arm/mach-at91/include/mach/at91_st.h index 969aac27109f..67fdbd13c3ed 100644 --- a/arch/arm/mach-at91/include/mach/at91_st.h +++ b/arch/arm/mach-at91/include/mach/at91_st.h @@ -23,7 +23,7 @@ extern void __iomem *at91_st_base; __raw_readl(at91_st_base + field) #define at91_st_write(field, value) \ - __raw_writel(value, at91_st_base + field); + __raw_writel(value, at91_st_base + field) #else .extern at91_st_base #endif diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h index b6504c19d55c..d3d7b993846b 100644 --- a/arch/arm/mach-at91/include/mach/cpu.h +++ b/arch/arm/mach-at91/include/mach/cpu.h @@ -36,6 +36,8 @@ #define ARCH_ID_AT91M40807 0x14080745 #define ARCH_ID_AT91R40008 0x44000840 +#define ARCH_ID_SAMA5D3 0x8A5C07C0 + #define ARCH_EXID_AT91SAM9M11 0x00000001 #define ARCH_EXID_AT91SAM9M10 0x00000002 #define ARCH_EXID_AT91SAM9G46 0x00000003 @@ -47,6 +49,11 @@ #define ARCH_EXID_AT91SAM9G25 0x00000003 #define ARCH_EXID_AT91SAM9X25 0x00000004 +#define ARCH_EXID_SAMA5D31 0x00444300 +#define ARCH_EXID_SAMA5D33 0x00414300 +#define ARCH_EXID_SAMA5D34 0x00414301 +#define ARCH_EXID_SAMA5D35 0x00584300 + #define ARCH_FAMILY_AT91X92 0x09200000 #define ARCH_FAMILY_AT91SAM9 0x01900000 #define ARCH_FAMILY_AT91SAM9XE 0x02900000 @@ -75,8 +82,11 @@ enum at91_soc_type { /* SAM9N12 */ AT91_SOC_SAM9N12, + /* SAMA5D3 */ + AT91_SOC_SAMA5D3, + /* Unknown type */ - AT91_SOC_NONE + AT91_SOC_UNKNOWN, }; enum at91_soc_subtype { @@ -93,8 +103,15 @@ enum at91_soc_subtype { AT91_SOC_SAM9G15, AT91_SOC_SAM9G35, AT91_SOC_SAM9X35, AT91_SOC_SAM9G25, AT91_SOC_SAM9X25, + /* SAMA5D3 */ + AT91_SOC_SAMA5D31, AT91_SOC_SAMA5D33, AT91_SOC_SAMA5D34, + AT91_SOC_SAMA5D35, + + /* No subtype for this SoC */ + AT91_SOC_SUBTYPE_NONE, + /* Unknown subtype */ - AT91_SOC_SUBTYPE_NONE + AT91_SOC_SUBTYPE_UNKNOWN, }; struct at91_socinfo { @@ -108,7 +125,7 @@ const char *at91_get_soc_subtype(struct at91_socinfo *c); static inline int at91_soc_is_detected(void) { - return at91_soc_initdata.type != AT91_SOC_NONE; + return at91_soc_initdata.type != AT91_SOC_UNKNOWN; } #ifdef CONFIG_SOC_AT91RM9200 @@ -187,6 +204,12 @@ static inline int at91_soc_is_detected(void) #define cpu_is_at91sam9n12() (0) #endif +#ifdef CONFIG_SOC_SAMA5D3 +#define cpu_is_sama5d3() (at91_soc_initdata.type == AT91_SOC_SAMA5D3) +#else +#define cpu_is_sama5d3() (0) +#endif + /* * Since this is ARM, we will never run on any AVR32 CPU. But these * definitions may reduce clutter in common drivers. diff --git a/arch/arm/mach-at91/include/mach/sama5d3.h b/arch/arm/mach-at91/include/mach/sama5d3.h new file mode 100644 index 000000000000..6dc81ee38048 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/sama5d3.h @@ -0,0 +1,73 @@ +/* + * Chip-specific header file for the SAMA5D3 family + * + * Copyright (C) 2013 Atmel, + * 2013 Ludovic Desroches <ludovic.desroches@atmel.com> + * + * Common definitions. + * Based on SAMA5D3 datasheet. + * + * Licensed under GPLv2 or later. + */ + +#ifndef SAMA5D3_H +#define SAMA5D3_H + +/* + * Peripheral identifiers/interrupts. + */ +#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ +#define AT91_ID_SYS 1 /* System Peripherals */ +#define SAMA5D3_ID_DBGU 2 /* debug Unit (usually no special interrupt line) */ +#define AT91_ID_PIT 3 /* PIT */ +#define SAMA5D3_ID_WDT 4 /* Watchdog Timer Interrupt */ +#define SAMA5D3_ID_HSMC 5 /* Static Memory Controller */ +#define SAMA5D3_ID_PIOA 6 /* PIOA */ +#define SAMA5D3_ID_PIOB 7 /* PIOB */ +#define SAMA5D3_ID_PIOC 8 /* PIOC */ +#define SAMA5D3_ID_PIOD 9 /* PIOD */ +#define SAMA5D3_ID_PIOE 10 /* PIOE */ +#define SAMA5D3_ID_SMD 11 /* SMD Soft Modem */ +#define SAMA5D3_ID_USART0 12 /* USART0 */ +#define SAMA5D3_ID_USART1 13 /* USART1 */ +#define SAMA5D3_ID_USART2 14 /* USART2 */ +#define SAMA5D3_ID_USART3 15 /* USART3 */ +#define SAMA5D3_ID_UART0 16 /* UART 0 */ +#define SAMA5D3_ID_UART1 17 /* UART 1 */ +#define SAMA5D3_ID_TWI0 18 /* Two-Wire Interface 0 */ +#define SAMA5D3_ID_TWI1 19 /* Two-Wire Interface 1 */ +#define SAMA5D3_ID_TWI2 20 /* Two-Wire Interface 2 */ +#define SAMA5D3_ID_HSMCI0 21 /* MCI */ +#define SAMA5D3_ID_HSMCI1 22 /* MCI */ +#define SAMA5D3_ID_HSMCI2 23 /* MCI */ +#define SAMA5D3_ID_SPI0 24 /* Serial Peripheral Interface 0 */ +#define SAMA5D3_ID_SPI1 25 /* Serial Peripheral Interface 1 */ +#define SAMA5D3_ID_TC0 26 /* Timer Counter 0 */ +#define SAMA5D3_ID_TC1 27 /* Timer Counter 2 */ +#define SAMA5D3_ID_PWM 28 /* Pulse Width Modulation Controller */ +#define SAMA5D3_ID_ADC 29 /* Touch Screen ADC Controller */ +#define SAMA5D3_ID_DMA0 30 /* DMA Controller 0 */ +#define SAMA5D3_ID_DMA1 31 /* DMA Controller 1 */ +#define SAMA5D3_ID_UHPHS 32 /* USB Host High Speed */ +#define SAMA5D3_ID_UDPHS 33 /* USB Device High Speed */ +#define SAMA5D3_ID_GMAC 34 /* Gigabit Ethernet MAC */ +#define SAMA5D3_ID_EMAC 35 /* Ethernet MAC */ +#define SAMA5D3_ID_LCDC 36 /* LCD Controller */ +#define SAMA5D3_ID_ISI 37 /* Image Sensor Interface */ +#define SAMA5D3_ID_SSC0 38 /* Synchronous Serial Controller 0 */ +#define SAMA5D3_ID_SSC1 39 /* Synchronous Serial Controller 1 */ +#define SAMA5D3_ID_CAN0 40 /* CAN Controller 0 */ +#define SAMA5D3_ID_CAN1 41 /* CAN Controller 1 */ +#define SAMA5D3_ID_SHA 42 /* Secure Hash Algorithm */ +#define SAMA5D3_ID_AES 43 /* Advanced Encryption Standard */ +#define SAMA5D3_ID_TDES 44 /* Triple Data Encryption Standard */ +#define SAMA5D3_ID_TRNG 45 /* True Random Generator Number */ +#define SAMA5D3_ID_IRQ0 47 /* Advanced Interrupt Controller (IRQ0) */ + +/* + * Internal Memory + */ +#define SAMA5D3_SRAM_BASE 0x00300000 /* Internal SRAM base address */ +#define SAMA5D3_SRAM_SIZE (128 * SZ_1K) /* Internal SRAM size (128Kb) */ + +#endif diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 73f1f250403a..530db304ec5e 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -270,6 +270,8 @@ static int at91_pm_enter(suspend_state_t state) at91rm9200_standby(); else if (cpu_is_at91sam9g45()) at91sam9g45_standby(); + else if (cpu_is_at91sam9263()) + at91sam9263_standby(); else at91sam9_standby(); break; diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h index 38f467c6b710..2f5908f0b8c5 100644 --- a/arch/arm/mach-at91/pm.h +++ b/arch/arm/mach-at91/pm.h @@ -70,13 +70,31 @@ static inline void at91sam9g45_standby(void) at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1); } -#ifdef CONFIG_SOC_AT91SAM9263 -/* - * FIXME either or both the SDRAM controllers (EB0, EB1) might be in use; - * handle those cases both here and in the Suspend-To-RAM support. +/* We manage both DDRAM/SDRAM controllers, we need more than one value to + * remember. */ -#warning Assuming EB1 SDRAM controller is *NOT* used -#endif +static inline void at91sam9263_standby(void) +{ + u32 lpr0, lpr1; + u32 saved_lpr0, saved_lpr1; + + saved_lpr1 = at91_ramc_read(1, AT91_SDRAMC_LPR); + lpr1 = saved_lpr1 & ~AT91_SDRAMC_LPCB; + lpr1 |= AT91_SDRAMC_LPCB_SELF_REFRESH; + + saved_lpr0 = at91_ramc_read(0, AT91_SDRAMC_LPR); + lpr0 = saved_lpr0 & ~AT91_SDRAMC_LPCB; + lpr0 |= AT91_SDRAMC_LPCB_SELF_REFRESH; + + /* self-refresh mode now */ + at91_ramc_write(0, AT91_SDRAMC_LPR, lpr0); + at91_ramc_write(1, AT91_SDRAMC_LPR, lpr1); + + cpu_do_idle(); + + at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr0); + at91_ramc_write(1, AT91_SDRAMC_LPR, saved_lpr1); +} static inline void at91sam9_standby(void) { diff --git a/arch/arm/mach-at91/sama5d3.c b/arch/arm/mach-at91/sama5d3.c new file mode 100644 index 000000000000..401279715ab1 --- /dev/null +++ b/arch/arm/mach-at91/sama5d3.c @@ -0,0 +1,377 @@ +/* + * Chip-specific setup code for the SAMA5D3 family + * + * Copyright (C) 2013 Atmel, + * 2013 Ludovic Desroches <ludovic.desroches@atmel.com> + * + * Licensed under GPLv2 or later. + */ + +#include <linux/module.h> +#include <linux/dma-mapping.h> + +#include <asm/irq.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <mach/sama5d3.h> +#include <mach/at91_pmc.h> +#include <mach/cpu.h> + +#include "soc.h" +#include "generic.h" +#include "clock.h" +#include "sam9_smc.h" + +/* -------------------------------------------------------------------- + * Clocks + * -------------------------------------------------------------------- */ + +/* + * The peripheral clocks. + */ + +static struct clk pioA_clk = { + .name = "pioA_clk", + .pid = SAMA5D3_ID_PIOA, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk pioB_clk = { + .name = "pioB_clk", + .pid = SAMA5D3_ID_PIOB, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk pioC_clk = { + .name = "pioC_clk", + .pid = SAMA5D3_ID_PIOC, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk pioD_clk = { + .name = "pioD_clk", + .pid = SAMA5D3_ID_PIOD, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk pioE_clk = { + .name = "pioE_clk", + .pid = SAMA5D3_ID_PIOE, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk usart0_clk = { + .name = "usart0_clk", + .pid = SAMA5D3_ID_USART0, + .type = CLK_TYPE_PERIPHERAL, + .div = AT91_PMC_PCR_DIV2, +}; +static struct clk usart1_clk = { + .name = "usart1_clk", + .pid = SAMA5D3_ID_USART1, + .type = CLK_TYPE_PERIPHERAL, + .div = AT91_PMC_PCR_DIV2, +}; +static struct clk usart2_clk = { + .name = "usart2_clk", + .pid = SAMA5D3_ID_USART2, + .type = CLK_TYPE_PERIPHERAL, + .div = AT91_PMC_PCR_DIV2, +}; +static struct clk usart3_clk = { + .name = "usart3_clk", + .pid = SAMA5D3_ID_USART3, + .type = CLK_TYPE_PERIPHERAL, + .div = AT91_PMC_PCR_DIV2, +}; +static struct clk uart0_clk = { + .name = "uart0_clk", + .pid = SAMA5D3_ID_UART0, + .type = CLK_TYPE_PERIPHERAL, + .div = AT91_PMC_PCR_DIV2, +}; +static struct clk uart1_clk = { + .name = "uart1_clk", + .pid = SAMA5D3_ID_UART1, + .type = CLK_TYPE_PERIPHERAL, + .div = AT91_PMC_PCR_DIV2, +}; +static struct clk twi0_clk = { + .name = "twi0_clk", + .pid = SAMA5D3_ID_TWI0, + .type = CLK_TYPE_PERIPHERAL, + .div = AT91_PMC_PCR_DIV2, +}; +static struct clk twi1_clk = { + .name = "twi1_clk", + .pid = SAMA5D3_ID_TWI1, + .type = CLK_TYPE_PERIPHERAL, + .div = AT91_PMC_PCR_DIV2, +}; +static struct clk twi2_clk = { + .name = "twi2_clk", + .pid = SAMA5D3_ID_TWI2, + .type = CLK_TYPE_PERIPHERAL, + .div = AT91_PMC_PCR_DIV2, +}; +static struct clk mmc0_clk = { + .name = "mci0_clk", + .pid = SAMA5D3_ID_HSMCI0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk mmc1_clk = { + .name = "mci1_clk", + .pid = SAMA5D3_ID_HSMCI1, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk mmc2_clk = { + .name = "mci2_clk", + .pid = SAMA5D3_ID_HSMCI2, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk spi0_clk = { + .name = "spi0_clk", + .pid = SAMA5D3_ID_SPI0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk spi1_clk = { + .name = "spi1_clk", + .pid = SAMA5D3_ID_SPI1, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk tcb0_clk = { + .name = "tcb0_clk", + .pid = SAMA5D3_ID_TC0, + .type = CLK_TYPE_PERIPHERAL, + .div = AT91_PMC_PCR_DIV2, +}; +static struct clk tcb1_clk = { + .name = "tcb1_clk", + .pid = SAMA5D3_ID_TC1, + .type = CLK_TYPE_PERIPHERAL, + .div = AT91_PMC_PCR_DIV2, +}; +static struct clk adc_clk = { + .name = "adc_clk", + .pid = SAMA5D3_ID_ADC, + .type = CLK_TYPE_PERIPHERAL, + .div = AT91_PMC_PCR_DIV2, +}; +static struct clk adc_op_clk = { + .name = "adc_op_clk", + .type = CLK_TYPE_PERIPHERAL, + .rate_hz = 5000000, +}; +static struct clk dma0_clk = { + .name = "dma0_clk", + .pid = SAMA5D3_ID_DMA0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk dma1_clk = { + .name = "dma1_clk", + .pid = SAMA5D3_ID_DMA1, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk uhphs_clk = { + .name = "uhphs", + .pid = SAMA5D3_ID_UHPHS, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk udphs_clk = { + .name = "udphs_clk", + .pid = SAMA5D3_ID_UDPHS, + .type = CLK_TYPE_PERIPHERAL, +}; +/* gmac only for sama5d33, sama5d34, sama5d35 */ +static struct clk macb0_clk = { + .name = "macb0_clk", + .pid = SAMA5D3_ID_GMAC, + .type = CLK_TYPE_PERIPHERAL, +}; +/* emac only for sama5d31, sama5d35 */ +static struct clk macb1_clk = { + .name = "macb1_clk", + .pid = SAMA5D3_ID_EMAC, + .type = CLK_TYPE_PERIPHERAL, +}; +/* lcd only for sama5d31, sama5d33, sama5d34 */ +static struct clk lcdc_clk = { + .name = "lcdc_clk", + .pid = SAMA5D3_ID_LCDC, + .type = CLK_TYPE_PERIPHERAL, +}; +/* isi only for sama5d33, sama5d35 */ +static struct clk isi_clk = { + .name = "isi_clk", + .pid = SAMA5D3_ID_ISI, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk can0_clk = { + .name = "can0_clk", + .pid = SAMA5D3_ID_CAN0, + .type = CLK_TYPE_PERIPHERAL, + .div = AT91_PMC_PCR_DIV2, +}; +static struct clk can1_clk = { + .name = "can1_clk", + .pid = SAMA5D3_ID_CAN1, + .type = CLK_TYPE_PERIPHERAL, + .div = AT91_PMC_PCR_DIV2, +}; +static struct clk ssc0_clk = { + .name = "ssc0_clk", + .pid = SAMA5D3_ID_SSC0, + .type = CLK_TYPE_PERIPHERAL, + .div = AT91_PMC_PCR_DIV2, +}; +static struct clk ssc1_clk = { + .name = "ssc1_clk", + .pid = SAMA5D3_ID_SSC1, + .type = CLK_TYPE_PERIPHERAL, + .div = AT91_PMC_PCR_DIV2, +}; +static struct clk sha_clk = { + .name = "sha_clk", + .pid = SAMA5D3_ID_SHA, + .type = CLK_TYPE_PERIPHERAL, + .div = AT91_PMC_PCR_DIV8, +}; +static struct clk aes_clk = { + .name = "aes_clk", + .pid = SAMA5D3_ID_AES, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk tdes_clk = { + .name = "tdes_clk", + .pid = SAMA5D3_ID_TDES, + .type = CLK_TYPE_PERIPHERAL, +}; + +static struct clk *periph_clocks[] __initdata = { + &pioA_clk, + &pioB_clk, + &pioC_clk, + &pioD_clk, + &pioE_clk, + &usart0_clk, + &usart1_clk, + &usart2_clk, + &usart3_clk, + &uart0_clk, + &uart1_clk, + &twi0_clk, + &twi1_clk, + &twi2_clk, + &mmc0_clk, + &mmc1_clk, + &mmc2_clk, + &spi0_clk, + &spi1_clk, + &tcb0_clk, + &tcb1_clk, + &adc_clk, + &adc_op_clk, + &dma0_clk, + &dma1_clk, + &uhphs_clk, + &udphs_clk, + &macb0_clk, + &macb1_clk, + &lcdc_clk, + &isi_clk, + &can0_clk, + &can1_clk, + &ssc0_clk, + &ssc1_clk, + &sha_clk, + &aes_clk, + &tdes_clk, +}; + +static struct clk pck0 = { + .name = "pck0", + .pmc_mask = AT91_PMC_PCK0, + .type = CLK_TYPE_PROGRAMMABLE, + .id = 0, +}; + +static struct clk pck1 = { + .name = "pck1", + .pmc_mask = AT91_PMC_PCK1, + .type = CLK_TYPE_PROGRAMMABLE, + .id = 1, +}; + +static struct clk pck2 = { + .name = "pck2", + .pmc_mask = AT91_PMC_PCK2, + .type = CLK_TYPE_PROGRAMMABLE, + .id = 2, +}; + +static struct clk_lookup periph_clocks_lookups[] = { + /* lookup table for DT entries */ + CLKDEV_CON_DEV_ID("usart", "ffffee00.serial", &mck), + CLKDEV_CON_DEV_ID(NULL, "fffff200.gpio", &pioA_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioB_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioC_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioD_clk), + CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioE_clk), + CLKDEV_CON_DEV_ID("usart", "f001c000.serial", &usart0_clk), + CLKDEV_CON_DEV_ID("usart", "f0020000.serial", &usart1_clk), + CLKDEV_CON_DEV_ID("usart", "f8020000.serial", &usart2_clk), + CLKDEV_CON_DEV_ID("usart", "f8024000.serial", &usart3_clk), + CLKDEV_CON_DEV_ID(NULL, "f0014000.i2c", &twi0_clk), + CLKDEV_CON_DEV_ID(NULL, "f0018000.i2c", &twi1_clk), + CLKDEV_CON_DEV_ID(NULL, "f801c000.i2c", &twi2_clk), + CLKDEV_CON_DEV_ID("mci_clk", "f0000000.mmc", &mmc0_clk), + CLKDEV_CON_DEV_ID("mci_clk", "f8000000.mmc", &mmc1_clk), + CLKDEV_CON_DEV_ID("mci_clk", "f8004000.mmc", &mmc2_clk), + CLKDEV_CON_DEV_ID("spi_clk", "f0004000.spi", &spi0_clk), + CLKDEV_CON_DEV_ID("spi_clk", "f8008000.spi", &spi1_clk), + CLKDEV_CON_DEV_ID("t0_clk", "f0010000.timer", &tcb0_clk), + CLKDEV_CON_DEV_ID("t0_clk", "f8014000.timer", &tcb1_clk), + CLKDEV_CON_DEV_ID("tsc_clk", "f8018000.tsadcc", &adc_clk), + CLKDEV_CON_DEV_ID("dma_clk", "ffffe600.dma-controller", &dma0_clk), + CLKDEV_CON_DEV_ID("dma_clk", "ffffe800.dma-controller", &dma1_clk), + CLKDEV_CON_DEV_ID("hclk", "600000.ohci", &uhphs_clk), + CLKDEV_CON_DEV_ID("ohci_clk", "600000.ohci", &uhphs_clk), + CLKDEV_CON_DEV_ID("ehci_clk", "700000.ehci", &uhphs_clk), + CLKDEV_CON_DEV_ID("pclk", "500000.gadget", &udphs_clk), + CLKDEV_CON_DEV_ID("hclk", "500000.gadget", &utmi_clk), + CLKDEV_CON_DEV_ID("hclk", "f0028000.ethernet", &macb0_clk), + CLKDEV_CON_DEV_ID("pclk", "f0028000.ethernet", &macb0_clk), + CLKDEV_CON_DEV_ID("hclk", "f802c000.ethernet", &macb1_clk), + CLKDEV_CON_DEV_ID("pclk", "f802c000.ethernet", &macb1_clk), + CLKDEV_CON_DEV_ID("pclk", "f0008000.ssc", &ssc0_clk), + CLKDEV_CON_DEV_ID("pclk", "f000c000.ssc", &ssc1_clk), + CLKDEV_CON_DEV_ID("can_clk", "f000c000.can", &can0_clk), + CLKDEV_CON_DEV_ID("can_clk", "f8010000.can", &can1_clk), + CLKDEV_CON_DEV_ID("sha_clk", "f8034000.sha", &sha_clk), + CLKDEV_CON_DEV_ID("aes_clk", "f8038000.aes", &aes_clk), + CLKDEV_CON_DEV_ID("tdes_clk", "f803c000.tdes", &tdes_clk), +}; + +static void __init sama5d3_register_clocks(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) + clk_register(periph_clocks[i]); + + clkdev_add_table(periph_clocks_lookups, + ARRAY_SIZE(periph_clocks_lookups)); + + clk_register(&pck0); + clk_register(&pck1); + clk_register(&pck2); +} + +/* -------------------------------------------------------------------- + * AT91SAM9x5 processor initialization + * -------------------------------------------------------------------- */ + +static void __init sama5d3_map_io(void) +{ + at91_init_sram(0, SAMA5D3_SRAM_BASE, SAMA5D3_SRAM_SIZE); +} + +AT91_SOC_START(sama5d3) + .map_io = sama5d3_map_io, + .register_clocks = sama5d3_register_clocks, +AT91_SOC_END diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c index 4b678478cf95..e2f4bdd146d6 100644 --- a/arch/arm/mach-at91/setup.c +++ b/arch/arm/mach-at91/setup.c @@ -105,28 +105,32 @@ static void __init soc_detect(u32 dbgu_base) switch (socid) { case ARCH_ID_AT91RM9200: at91_soc_initdata.type = AT91_SOC_RM9200; - if (at91_soc_initdata.subtype == AT91_SOC_SUBTYPE_NONE) + if (at91_soc_initdata.subtype == AT91_SOC_SUBTYPE_UNKNOWN) at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA; at91_boot_soc = at91rm9200_soc; break; case ARCH_ID_AT91SAM9260: at91_soc_initdata.type = AT91_SOC_SAM9260; + at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE; at91_boot_soc = at91sam9260_soc; break; case ARCH_ID_AT91SAM9261: at91_soc_initdata.type = AT91_SOC_SAM9261; + at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE; at91_boot_soc = at91sam9261_soc; break; case ARCH_ID_AT91SAM9263: at91_soc_initdata.type = AT91_SOC_SAM9263; + at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE; at91_boot_soc = at91sam9263_soc; break; case ARCH_ID_AT91SAM9G20: at91_soc_initdata.type = AT91_SOC_SAM9G20; + at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE; at91_boot_soc = at91sam9260_soc; break; @@ -139,6 +143,7 @@ static void __init soc_detect(u32 dbgu_base) case ARCH_ID_AT91SAM9RL64: at91_soc_initdata.type = AT91_SOC_SAM9RL; + at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE; at91_boot_soc = at91sam9rl_soc; break; @@ -151,11 +156,17 @@ static void __init soc_detect(u32 dbgu_base) at91_soc_initdata.type = AT91_SOC_SAM9N12; at91_boot_soc = at91sam9n12_soc; break; + + case ARCH_ID_SAMA5D3: + at91_soc_initdata.type = AT91_SOC_SAMA5D3; + at91_boot_soc = sama5d3_soc; + break; } /* at91sam9g10 */ if ((socid & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) { at91_soc_initdata.type = AT91_SOC_SAM9G10; + at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE; at91_boot_soc = at91sam9261_soc; } /* at91sam9xe */ @@ -206,6 +217,23 @@ static void __init soc_detect(u32 dbgu_base) break; } } + + if (at91_soc_initdata.type == AT91_SOC_SAMA5D3) { + switch (at91_soc_initdata.exid) { + case ARCH_EXID_SAMA5D31: + at91_soc_initdata.subtype = AT91_SOC_SAMA5D31; + break; + case ARCH_EXID_SAMA5D33: + at91_soc_initdata.subtype = AT91_SOC_SAMA5D33; + break; + case ARCH_EXID_SAMA5D34: + at91_soc_initdata.subtype = AT91_SOC_SAMA5D34; + break; + case ARCH_EXID_SAMA5D35: + at91_soc_initdata.subtype = AT91_SOC_SAMA5D35; + break; + } + } } static const char *soc_name[] = { @@ -219,7 +247,8 @@ static const char *soc_name[] = { [AT91_SOC_SAM9RL] = "at91sam9rl", [AT91_SOC_SAM9X5] = "at91sam9x5", [AT91_SOC_SAM9N12] = "at91sam9n12", - [AT91_SOC_NONE] = "Unknown" + [AT91_SOC_SAMA5D3] = "sama5d3", + [AT91_SOC_UNKNOWN] = "Unknown", }; const char *at91_get_soc_type(struct at91_socinfo *c) @@ -241,7 +270,12 @@ static const char *soc_subtype_name[] = { [AT91_SOC_SAM9X35] = "at91sam9x35", [AT91_SOC_SAM9G25] = "at91sam9g25", [AT91_SOC_SAM9X25] = "at91sam9x25", - [AT91_SOC_SUBTYPE_NONE] = "Unknown" + [AT91_SOC_SAMA5D31] = "sama5d31", + [AT91_SOC_SAMA5D33] = "sama5d33", + [AT91_SOC_SAMA5D34] = "sama5d34", + [AT91_SOC_SAMA5D35] = "sama5d35", + [AT91_SOC_SUBTYPE_NONE] = "None", + [AT91_SOC_SUBTYPE_UNKNOWN] = "Unknown", }; const char *at91_get_soc_subtype(struct at91_socinfo *c) @@ -255,8 +289,8 @@ void __init at91_map_io(void) /* Map peripherals */ iotable_init(&at91_io_desc, 1); - at91_soc_initdata.type = AT91_SOC_NONE; - at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE; + at91_soc_initdata.type = AT91_SOC_UNKNOWN; + at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_UNKNOWN; soc_detect(AT91_BASE_DBGU0); if (!at91_soc_is_detected()) @@ -267,8 +301,9 @@ void __init at91_map_io(void) pr_info("AT91: Detected soc type: %s\n", at91_get_soc_type(&at91_soc_initdata)); - pr_info("AT91: Detected soc subtype: %s\n", - at91_get_soc_subtype(&at91_soc_initdata)); + if (at91_soc_initdata.subtype != AT91_SOC_SUBTYPE_NONE) + pr_info("AT91: Detected soc subtype: %s\n", + at91_get_soc_subtype(&at91_soc_initdata)); if (!at91_soc_is_enabled()) panic("AT91: Soc not enabled"); @@ -333,7 +368,7 @@ static void at91_dt_rstc(void) of_id = of_match_node(rstc_ids, np); if (!of_id) - panic("AT91: rtsc no restart function availlable\n"); + panic("AT91: rtsc no restart function available\n"); arm_pm_restart = of_id->data; @@ -353,7 +388,7 @@ static void at91_dt_ramc(void) np = of_find_matching_node(NULL, ramc_ids); if (!np) - panic("unable to find compatible ram conroller node in dtb\n"); + panic("unable to find compatible ram controller node in dtb\n"); at91_ramc_base[0] = of_iomap(np, 0); if (!at91_ramc_base[0]) @@ -403,7 +438,7 @@ static void at91_dt_shdwc(void) np = of_find_matching_node(NULL, shdwc_ids); if (!np) { - pr_debug("AT91: unable to find compatible shutdown (shdwc) conroller node in dtb\n"); + pr_debug("AT91: unable to find compatible shutdown (shdwc) controller node in dtb\n"); return; } @@ -419,7 +454,7 @@ static void at91_dt_shdwc(void) if (!of_property_read_u32(np, "atmel,wakeup-counter", ®)) { if (reg > AT91_SHDW_CPTWK0_MAX) { - pr_warn("AT91: shdwc wakeup conter 0x%x > 0x%x reduce it to 0x%x\n", + pr_warn("AT91: shdwc wakeup counter 0x%x > 0x%x reduce it to 0x%x\n", reg, AT91_SHDW_CPTWK0_MAX, AT91_SHDW_CPTWK0_MAX); reg = AT91_SHDW_CPTWK0_MAX; } diff --git a/arch/arm/mach-at91/soc.h b/arch/arm/mach-at91/soc.h index 9c6d3d4f9a23..43a225f9e713 100644 --- a/arch/arm/mach-at91/soc.h +++ b/arch/arm/mach-at91/soc.h @@ -22,9 +22,10 @@ extern struct at91_init_soc at91sam9g45_soc; extern struct at91_init_soc at91sam9rl_soc; extern struct at91_init_soc at91sam9x5_soc; extern struct at91_init_soc at91sam9n12_soc; +extern struct at91_init_soc sama5d3_soc; #define AT91_SOC_START(_name) \ -struct at91_init_soc __initdata at91##_name##_soc \ +struct at91_init_soc __initdata _name##_soc \ __used \ = { \ .builtin = 1, \ @@ -68,3 +69,7 @@ static inline int at91_soc_is_enabled(void) #if !defined(CONFIG_SOC_AT91SAM9N12) #define at91sam9n12_soc at91_boot_soc #endif + +#if !defined(CONFIG_SOC_SAMA5D3) +#define sama5d3_soc at91_boot_soc +#endif diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig index bf02471d7e7c..f11289519c39 100644 --- a/arch/arm/mach-bcm/Kconfig +++ b/arch/arm/mach-bcm/Kconfig @@ -6,6 +6,7 @@ config ARCH_BCM select ARM_ERRATA_764369 if SMP select ARM_GIC select CPU_V7 + select CLKSRC_OF select GENERIC_CLOCKEVENTS select GENERIC_TIME select GPIO_BCM diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile index bbf412261e5e..6adb6aecf48f 100644 --- a/arch/arm/mach-bcm/Makefile +++ b/arch/arm/mach-bcm/Makefile @@ -10,4 +10,6 @@ # of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. -obj-$(CONFIG_ARCH_BCM) := board_bcm.o +obj-$(CONFIG_ARCH_BCM) := board_bcm.o bcm_kona_smc.o bcm_kona_smc_asm.o +plus_sec := $(call as-instr,.arch_extension sec,+sec) +AFLAGS_bcm_kona_smc_asm.o :=-Wa,-march=armv7-a$(plus_sec) diff --git a/arch/arm/mach-bcm/bcm_kona_smc.c b/arch/arm/mach-bcm/bcm_kona_smc.c new file mode 100644 index 000000000000..56d9d19b2470 --- /dev/null +++ b/arch/arm/mach-bcm/bcm_kona_smc.c @@ -0,0 +1,118 @@ +/* + * Copyright (C) 2013 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <stdarg.h> +#include <linux/smp.h> +#include <linux/io.h> +#include <linux/ioport.h> + +#include <asm/cacheflush.h> +#include <linux/of_address.h> + +#include "bcm_kona_smc.h" + +struct secure_bridge_data { + void __iomem *bounce; /* virtual address */ + u32 __iomem buffer_addr; /* physical address */ + int initialized; +} bridge_data; + +struct bcm_kona_smc_data { + unsigned service_id; + unsigned arg0; + unsigned arg1; + unsigned arg2; + unsigned arg3; +}; + +static const struct of_device_id bcm_kona_smc_ids[] __initconst = { + {.compatible = "bcm,kona-smc"}, + {}, +}; + +/* Map in the bounce area */ +void __init bcm_kona_smc_init(void) +{ + struct device_node *node; + + /* Read buffer addr and size from the device tree node */ + node = of_find_matching_node(NULL, bcm_kona_smc_ids); + BUG_ON(!node); + + /* Don't care about size or flags of the DT node */ + bridge_data.buffer_addr = + be32_to_cpu(*of_get_address(node, 0, NULL, NULL)); + BUG_ON(!bridge_data.buffer_addr); + + bridge_data.bounce = of_iomap(node, 0); + BUG_ON(!bridge_data.bounce); + + bridge_data.initialized = 1; + + pr_info("Secure API initialized!\n"); +} + +/* __bcm_kona_smc() should only run on CPU 0, with pre-emption disabled */ +static void __bcm_kona_smc(void *info) +{ + struct bcm_kona_smc_data *data = info; + u32 *args = bridge_data.bounce; + int rc = 0; + + /* Must run on CPU 0 */ + BUG_ON(smp_processor_id() != 0); + + /* Check map in the bounce area */ + BUG_ON(!bridge_data.initialized); + + /* Copy one 32 bit word into the bounce area */ + args[0] = data->arg0; + args[1] = data->arg1; + args[2] = data->arg2; + args[3] = data->arg3; + + /* Flush caches for input data passed to Secure Monitor */ + if (data->service_id != SSAPI_BRCM_START_VC_CORE) + flush_cache_all(); + + /* Trap into Secure Monitor */ + rc = bcm_kona_smc_asm(data->service_id, bridge_data.buffer_addr); + + if (rc != SEC_ROM_RET_OK) + pr_err("Secure Monitor call failed (0x%x)!\n", rc); +} + +unsigned bcm_kona_smc(unsigned service_id, unsigned arg0, unsigned arg1, + unsigned arg2, unsigned arg3) +{ + struct bcm_kona_smc_data data; + + data.service_id = service_id; + data.arg0 = arg0; + data.arg1 = arg1; + data.arg2 = arg2; + data.arg3 = arg3; + + /* + * Due to a limitation of the secure monitor, we must use the SMP + * infrastructure to forward all secure monitor calls to Core 0. + */ + if (get_cpu() != 0) + smp_call_function_single(0, __bcm_kona_smc, (void *)&data, 1); + else + __bcm_kona_smc(&data); + + put_cpu(); + + return 0; +} diff --git a/arch/arm/mach-bcm/bcm_kona_smc.h b/arch/arm/mach-bcm/bcm_kona_smc.h new file mode 100644 index 000000000000..3bedbed1c21b --- /dev/null +++ b/arch/arm/mach-bcm/bcm_kona_smc.h @@ -0,0 +1,80 @@ +/* + * Copyright (C) 2013 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef BCM_KONA_SMC_H +#define BCM_KONA_SMC_H + +#include <linux/types.h> +#define FLAGS (SEC_ROM_ICACHE_ENABLE_MASK | SEC_ROM_DCACHE_ENABLE_MASK | \ + SEC_ROM_IRQ_ENABLE_MASK | SEC_ROM_FIQ_ENABLE_MASK) + +/*! + * Definitions for IRQ & FIQ Mask for ARM + */ + +#define FIQ_IRQ_MASK 0xC0 +#define FIQ_MASK 0x40 +#define IRQ_MASK 0x80 + +/*! + * Secure Mode FLAGs + */ + +/* When set, enables ICache within the secure mode */ +#define SEC_ROM_ICACHE_ENABLE_MASK 0x00000001 + +/* When set, enables DCache within the secure mode */ +#define SEC_ROM_DCACHE_ENABLE_MASK 0x00000002 + +/* When set, enables IRQ within the secure mode */ +#define SEC_ROM_IRQ_ENABLE_MASK 0x00000004 + +/* When set, enables FIQ within the secure mode */ +#define SEC_ROM_FIQ_ENABLE_MASK 0x00000008 + +/* When set, enables Unified L2 cache within the secure mode */ +#define SEC_ROM_UL2_CACHE_ENABLE_MASK 0x00000010 + +/* Broadcom Secure Service API Service IDs */ +#define SSAPI_DORMANT_ENTRY_SERV 0x01000000 +#define SSAPI_PUBLIC_OTP_SERV 0x01000001 +#define SSAPI_ENABLE_L2_CACHE 0x01000002 +#define SSAPI_DISABLE_L2_CACHE 0x01000003 +#define SSAPI_WRITE_SCU_STATUS 0x01000004 +#define SSAPI_WRITE_PWR_GATE 0x01000005 + +/* Broadcom Secure Service API Return Codes */ +#define SEC_ROM_RET_OK 0x00000001 +#define SEC_ROM_RET_FAIL 0x00000009 + +#define SSAPI_RET_FROM_INT_SERV 0x4 +#define SEC_EXIT_NORMAL 0x1 + +#define SSAPI_ROW_AES 0x0E000006 +#define SSAPI_BRCM_START_VC_CORE 0x0E000008 + +#ifndef __ASSEMBLY__ +extern void bcm_kona_smc_init(void); + +extern unsigned bcm_kona_smc(unsigned service_id, + unsigned arg0, + unsigned arg1, + unsigned arg2, + unsigned arg3); + +extern int bcm_kona_smc_asm(u32 service_id, + u32 buffer_addr); + +#endif /* __ASSEMBLY__ */ + +#endif /* BCM_KONA_SMC_H */ diff --git a/arch/arm/mach-bcm/bcm_kona_smc_asm.S b/arch/arm/mach-bcm/bcm_kona_smc_asm.S new file mode 100644 index 000000000000..a1608480d60d --- /dev/null +++ b/arch/arm/mach-bcm/bcm_kona_smc_asm.S @@ -0,0 +1,41 @@ +/* + * Copyright (C) 2013 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/linkage.h> +#include "bcm_kona_smc.h" + +/* + * int bcm_kona_smc_asm(u32 service_id, u32 buffer_addr) + */ + +ENTRY(bcm_kona_smc_asm) + stmfd sp!, {r4-r12, lr} + mov r4, r0 @ service_id + mov r5, #3 @ Keep IRQ and FIQ off in SM + /* + * Since interrupts are disabled in the open mode, we must keep + * interrupts disabled in secure mode by setting R5=0x3. If interrupts + * are enabled in open mode, we can set R5=0x0 to allow interrupts in + * secure mode. If we did this, the secure monitor would return back + * control to the open mode to handle the interrupt prior to completing + * the secure service. If this happened, R12 would not be + * SEC_EXIT_NORMAL and we would need to call SMC again after resetting + * R5 (it gets clobbered by the secure monitor) and setting R4 to + * SSAPI_RET_FROM_INT_SERV to indicate that we want the secure monitor + * to finish up the previous uncompleted secure service. + */ + mov r6, r1 @ buffer_addr + smc #0 + /* Check r12 for SEC_EXIT_NORMAL here if interrupts are enabled */ + ldmfd sp!, {r4-r12, pc} +ENDPROC(bcm_kona_smc_asm) diff --git a/arch/arm/mach-bcm/board_bcm.c b/arch/arm/mach-bcm/board_bcm.c index f0f9abafad29..22e8421b1df3 100644 --- a/arch/arm/mach-bcm/board_bcm.c +++ b/arch/arm/mach-bcm/board_bcm.c @@ -16,26 +16,46 @@ #include <linux/device.h> #include <linux/platform_device.h> #include <linux/irqchip.h> +#include <linux/clocksource.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> +#include <asm/hardware/cache-l2x0.h> -static void timer_init(void) + +#include "bcm_kona_smc.h" + +static int __init kona_l2_cache_init(void) { -} + if (!IS_ENABLED(CONFIG_CACHE_L2X0)) + return 0; + + bcm_kona_smc(SSAPI_ENABLE_L2_CACHE, 0, 0, 0, 0); + /* + * The aux_val and aux_mask have no effect since L2 cache is already + * enabled. Pass 0s for aux_val and 1s for aux_mask for default value. + */ + l2x0_of_init(0, ~0); + + return 0; +} static void __init board_init(void) { of_platform_populate(NULL, of_default_bus_match_table, NULL, &platform_bus); + + bcm_kona_smc_init(); + + kona_l2_cache_init(); } static const char * const bcm11351_dt_compat[] = { "bcm,bcm11351", NULL, }; DT_MACHINE_START(BCM11351_DT, "Broadcom Application Processor") .init_irq = irqchip_init, - .init_time = timer_init, + .init_time = clocksource_of_init, .init_machine = board_init, .dt_compat = bcm11351_dt_compat, MACHINE_END diff --git a/arch/arm/mach-bcm2835/Kconfig b/arch/arm/mach-bcm2835/Kconfig new file mode 100644 index 000000000000..560045cafc34 --- /dev/null +++ b/arch/arm/mach-bcm2835/Kconfig @@ -0,0 +1,15 @@ +config ARCH_BCM2835 + bool "Broadcom BCM2835 family" if ARCH_MULTI_V6 + select ARCH_REQUIRE_GPIOLIB + select ARM_AMBA + select ARM_ERRATA_411920 + select ARM_TIMER_SP804 + select CLKDEV_LOOKUP + select CLKSRC_OF + select CPU_V6 + select GENERIC_CLOCKEVENTS + select PINCTRL + select PINCTRL_BCM2835 + help + This enables support for the Broadcom BCM2835 SoC. This SoC is + use in the Raspberry Pi, and Roku 2 devices. diff --git a/arch/arm/mach-bcm2835/Makefile.boot b/arch/arm/mach-bcm2835/Makefile.boot deleted file mode 100644 index b3271754e9fd..000000000000 --- a/arch/arm/mach-bcm2835/Makefile.boot +++ /dev/null @@ -1 +0,0 @@ -zreladdr-y := 0x00008000 diff --git a/arch/arm/mach-bcm2835/bcm2835.c b/arch/arm/mach-bcm2835/bcm2835.c index 6f5785985dd1..740fa9ebe249 100644 --- a/arch/arm/mach-bcm2835/bcm2835.c +++ b/arch/arm/mach-bcm2835/bcm2835.c @@ -23,8 +23,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/bcm2835_soc.h> - #define PM_RSTC 0x1c #define PM_RSTS 0x20 #define PM_WDOG 0x24 @@ -34,6 +32,10 @@ #define PM_RSTC_WRCFG_FULL_RESET 0x00000020 #define PM_RSTS_HADWRH_SET 0x00000040 +#define BCM2835_PERIPH_PHYS 0x20000000 +#define BCM2835_PERIPH_VIRT 0xf0000000 +#define BCM2835_PERIPH_SIZE SZ_16M + static void __iomem *wdt_regs; /* diff --git a/arch/arm/mach-bcm2835/include/mach/bcm2835_soc.h b/arch/arm/mach-bcm2835/include/mach/bcm2835_soc.h deleted file mode 100644 index d4dfcf7a9cda..000000000000 --- a/arch/arm/mach-bcm2835/include/mach/bcm2835_soc.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * Copyright (C) 2012 Stephen Warren - * - * Derived from code: - * Copyright (C) 2010 Broadcom - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __MACH_BCM2835_BCM2835_SOC_H__ -#define __MACH_BCM2835_BCM2835_SOC_H__ - -#include <asm/sizes.h> - -#define BCM2835_PERIPH_PHYS 0x20000000 -#define BCM2835_PERIPH_VIRT 0xf0000000 -#define BCM2835_PERIPH_SIZE SZ_16M -#define BCM2835_DEBUG_PHYS 0x20201000 -#define BCM2835_DEBUG_VIRT 0xf0201000 - -#endif diff --git a/arch/arm/mach-bcm2835/include/mach/gpio.h b/arch/arm/mach-bcm2835/include/mach/gpio.h deleted file mode 100644 index 40a8c178f10d..000000000000 --- a/arch/arm/mach-bcm2835/include/mach/gpio.h +++ /dev/null @@ -1 +0,0 @@ -/* empty */ diff --git a/arch/arm/mach-bcm2835/include/mach/timex.h b/arch/arm/mach-bcm2835/include/mach/timex.h deleted file mode 100644 index 6d021e136ae3..000000000000 --- a/arch/arm/mach-bcm2835/include/mach/timex.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * BCM2835 system clock frequency - * - * Copyright (C) 2010 Broadcom - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -#define CLOCK_TICK_RATE (1000000) - -#endif diff --git a/arch/arm/mach-bcm2835/include/mach/uncompress.h b/arch/arm/mach-bcm2835/include/mach/uncompress.h deleted file mode 100644 index bf86dca3bf71..000000000000 --- a/arch/arm/mach-bcm2835/include/mach/uncompress.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - * Copyright (C) 2010 Broadcom - * Copyright (C) 2003 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/io.h> -#include <linux/amba/serial.h> -#include <mach/bcm2835_soc.h> - -#define UART0_BASE BCM2835_DEBUG_PHYS - -#define BCM2835_UART_DR IOMEM(UART0_BASE + UART01x_DR) -#define BCM2835_UART_FR IOMEM(UART0_BASE + UART01x_FR) -#define BCM2835_UART_CR IOMEM(UART0_BASE + UART011_CR) - -static inline void putc(int c) -{ - while (__raw_readl(BCM2835_UART_FR) & UART01x_FR_TXFF) - barrier(); - - __raw_writel(c, BCM2835_UART_DR); -} - -static inline void flush(void) -{ - int fr; - - do { - fr = __raw_readl(BCM2835_UART_FR); - barrier(); - } while ((fr & (UART011_FR_TXFE | UART01x_FR_BUSY)) != UART011_FR_TXFE); -} - -#define arch_decomp_setup() diff --git a/arch/arm/mach-cns3xxx/Kconfig b/arch/arm/mach-cns3xxx/Kconfig index 9ebfcc46feb1..dbf0df8bb0ac 100644 --- a/arch/arm/mach-cns3xxx/Kconfig +++ b/arch/arm/mach-cns3xxx/Kconfig @@ -1,8 +1,20 @@ +config ARCH_CNS3XXX + bool "Cavium Networks CNS3XXX family" if ARCH_MULTI_V6 + select ARM_GIC + select CPU_V6K + select GENERIC_CLOCKEVENTS + select MIGHT_HAVE_CACHE_L2X0 + select MIGHT_HAVE_PCI + select PCI_DOMAINS if PCI + help + Support for Cavium Networks CNS3XXX platform. + menu "CNS3XXX platform type" depends on ARCH_CNS3XXX config MACH_CNS3420VB bool "Support for CNS3420 Validation Board" + depends on ATAGS help Include support for the Cavium Networks CNS3420 MPCore Platform Baseboard. diff --git a/arch/arm/mach-cns3xxx/Makefile b/arch/arm/mach-cns3xxx/Makefile index 11033f1c2e23..a1ff10848698 100644 --- a/arch/arm/mach-cns3xxx/Makefile +++ b/arch/arm/mach-cns3xxx/Makefile @@ -1,3 +1,5 @@ -obj-$(CONFIG_ARCH_CNS3XXX) += core.o pm.o devices.o -obj-$(CONFIG_PCI) += pcie.o -obj-$(CONFIG_MACH_CNS3420VB) += cns3420vb.o +obj-$(CONFIG_ARCH_CNS3XXX) += cns3xxx.o +cns3xxx-y += core.o pm.o +cns3xxx-$(CONFIG_ATAGS) += devices.o +cns3xxx-$(CONFIG_PCI) += pcie.o +cns3xxx-$(CONFIG_MACH_CNS3420VB) += cns3420vb.o diff --git a/arch/arm/mach-cns3xxx/cns3420vb.c b/arch/arm/mach-cns3xxx/cns3420vb.c index a71867e1d8d6..ce096d678aa4 100644 --- a/arch/arm/mach-cns3xxx/cns3420vb.c +++ b/arch/arm/mach-cns3xxx/cns3420vb.c @@ -31,9 +31,8 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/time.h> -#include <mach/cns3xxx.h> -#include <mach/irqs.h> -#include <mach/pm.h> +#include "cns3xxx.h" +#include "pm.h" #include "core.h" #include "devices.h" @@ -247,6 +246,7 @@ static void __init cns3420_map_io(void) MACHINE_START(CNS3420VB, "Cavium Networks CNS3420 Validation Board") .atag_offset = 0x100, + .nr_irqs = NR_IRQS_CNS3XXX, .map_io = cns3420_map_io, .init_irq = cns3xxx_init_irq, .init_time = cns3xxx_timer_init, diff --git a/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h b/arch/arm/mach-cns3xxx/cns3xxx.h index b1021aafa481..a0f5b60662ae 100644 --- a/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h +++ b/arch/arm/mach-cns3xxx/cns3xxx.h @@ -20,22 +20,16 @@ #define CNS3XXX_SPI_FLASH_BASE 0x60000000 /* SPI Serial Flash Memory */ #define CNS3XXX_SWITCH_BASE 0x70000000 /* Switch and HNAT Control */ -#define CNS3XXX_SWITCH_BASE_VIRT 0xFFF00000 #define CNS3XXX_PPE_BASE 0x70001000 /* HANT */ -#define CNS3XXX_PPE_BASE_VIRT 0xFFF50000 #define CNS3XXX_EMBEDDED_SRAM_BASE 0x70002000 /* HANT Embedded SRAM */ -#define CNS3XXX_EMBEDDED_SRAM_BASE_VIRT 0xFFF60000 #define CNS3XXX_SSP_BASE 0x71000000 /* Synchronous Serial Port - SPI/PCM/I2C */ -#define CNS3XXX_SSP_BASE_VIRT 0xFFF01000 #define CNS3XXX_DMC_BASE 0x72000000 /* DMC Control (DDR2 SDRAM) */ -#define CNS3XXX_DMC_BASE_VIRT 0xFFF02000 #define CNS3XXX_SMC_BASE 0x73000000 /* SMC Control */ -#define CNS3XXX_SMC_BASE_VIRT 0xFFF03000 #define SMC_MEMC_STATUS_OFFSET 0x000 #define SMC_MEMIF_CFG_OFFSET 0x004 @@ -74,13 +68,10 @@ #define SMC_PCELL_ID_3_OFFSET 0xFFC #define CNS3XXX_GPIOA_BASE 0x74000000 /* GPIO port A */ -#define CNS3XXX_GPIOA_BASE_VIRT 0xFFF04000 #define CNS3XXX_GPIOB_BASE 0x74800000 /* GPIO port B */ -#define CNS3XXX_GPIOB_BASE_VIRT 0xFFF05000 #define CNS3XXX_RTC_BASE 0x75000000 /* Real Time Clock */ -#define CNS3XXX_RTC_BASE_VIRT 0xFFF06000 #define RTC_SEC_OFFSET 0x00 #define RTC_MIN_OFFSET 0x04 @@ -112,22 +103,16 @@ #define CNS3XXX_UART0_BASE_VIRT 0xFB002000 #define CNS3XXX_UART1_BASE 0x78400000 /* UART 1 */ -#define CNS3XXX_UART1_BASE_VIRT 0xFFF0A000 #define CNS3XXX_UART2_BASE 0x78800000 /* UART 2 */ -#define CNS3XXX_UART2_BASE_VIRT 0xFFF0B000 #define CNS3XXX_DMAC_BASE 0x79000000 /* Generic DMA Control */ -#define CNS3XXX_DMAC_BASE_VIRT 0xFFF0D000 #define CNS3XXX_CORESIGHT_BASE 0x7A000000 /* CoreSight */ -#define CNS3XXX_CORESIGHT_BASE_VIRT 0xFFF0E000 #define CNS3XXX_CRYPTO_BASE 0x7B000000 /* Crypto */ -#define CNS3XXX_CRYPTO_BASE_VIRT 0xFFF0F000 #define CNS3XXX_I2S_BASE 0x7C000000 /* I2S */ -#define CNS3XXX_I2S_BASE_VIRT 0xFFF10000 #define CNS3XXX_TIMER1_2_3_BASE 0x7C800000 /* Timer */ #define CNS3XXX_TIMER1_2_3_BASE_VIRT 0xFB003000 @@ -150,42 +135,31 @@ #define TIMER_FREERUN_CONTROL_OFFSET 0x44 #define CNS3XXX_HCIE_BASE 0x7D000000 /* HCIE Control */ -#define CNS3XXX_HCIE_BASE_VIRT 0xFFF30000 #define CNS3XXX_RAID_BASE 0x7E000000 /* RAID Control */ -#define CNS3XXX_RAID_BASE_VIRT 0xFFF12000 #define CNS3XXX_AXI_IXC_BASE 0x7F000000 /* AXI IXC */ -#define CNS3XXX_AXI_IXC_BASE_VIRT 0xFFF13000 #define CNS3XXX_CLCD_BASE 0x80000000 /* LCD Control */ -#define CNS3XXX_CLCD_BASE_VIRT 0xFFF14000 #define CNS3XXX_USBOTG_BASE 0x81000000 /* USB OTG Control */ -#define CNS3XXX_USBOTG_BASE_VIRT 0xFFF15000 #define CNS3XXX_USB_BASE 0x82000000 /* USB Host Control */ #define CNS3XXX_SATA2_BASE 0x83000000 /* SATA */ #define CNS3XXX_SATA2_SIZE SZ_16M -#define CNS3XXX_SATA2_BASE_VIRT 0xFFF17000 #define CNS3XXX_CAMERA_BASE 0x84000000 /* Camera Interface */ -#define CNS3XXX_CAMERA_BASE_VIRT 0xFFF18000 #define CNS3XXX_SDIO_BASE 0x85000000 /* SDIO */ -#define CNS3XXX_SDIO_BASE_VIRT 0xFFF19000 #define CNS3XXX_I2S_TDM_BASE 0x86000000 /* I2S TDM */ -#define CNS3XXX_I2S_TDM_BASE_VIRT 0xFFF1A000 #define CNS3XXX_2DG_BASE 0x87000000 /* 2D Graphic Control */ -#define CNS3XXX_2DG_BASE_VIRT 0xFFF1B000 #define CNS3XXX_USB_OHCI_BASE 0x88000000 /* USB OHCI */ #define CNS3XXX_L2C_BASE 0x92000000 /* L2 Cache Control */ -#define CNS3XXX_L2C_BASE_VIRT 0xFFF27000 #define CNS3XXX_PCIE0_MEM_BASE 0xA0000000 /* PCIe Port 0 IO/Memory Space */ #define CNS3XXX_PCIE0_MEM_BASE_VIRT 0xE0000000 @@ -239,7 +213,6 @@ #define CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT (CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x1000) #define CNS3XXX_TC11MP_L220_BASE 0x92002000 /* L220 registers */ -#define CNS3XXX_TC11MP_L220_BASE_VIRT 0xFF002000 /* * Misc block @@ -553,6 +526,8 @@ int cns3xxx_cpu_clock(void); /* * ARM11 MPCore interrupt sources (primary GIC) */ +#define IRQ_TC11MP_GIC_START 32 + #define IRQ_CNS3XXX_PMU (IRQ_TC11MP_GIC_START + 0) #define IRQ_CNS3XXX_SDIO (IRQ_TC11MP_GIC_START + 1) #define IRQ_CNS3XXX_L2CC (IRQ_TC11MP_GIC_START + 2) @@ -624,9 +599,4 @@ int cns3xxx_cpu_clock(void); #define NR_IRQS_CNS3XXX (IRQ_TC11MP_GIC_START + 64) -#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_CNS3XXX) -#undef NR_IRQS -#define NR_IRQS NR_IRQS_CNS3XXX -#endif - #endif /* __MACH_BOARD_CNS3XXX_H */ diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c index 52e4bb5cf12d..e38b279f402c 100644 --- a/arch/arm/mach-cns3xxx/core.c +++ b/arch/arm/mach-cns3xxx/core.c @@ -13,12 +13,18 @@ #include <linux/clockchips.h> #include <linux/io.h> #include <linux/irqchip/arm-gic.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/usb/ehci_pdriver.h> +#include <linux/usb/ohci_pdriver.h> +#include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/time.h> #include <asm/mach/irq.h> #include <asm/hardware/cache-l2x0.h> -#include <mach/cns3xxx.h> +#include "cns3xxx.h" #include "core.h" +#include "pm.h" static struct map_desc cns3xxx_io_desc[] __initdata = { { @@ -32,16 +38,6 @@ static struct map_desc cns3xxx_io_desc[] __initdata = { .length = SZ_4K, .type = MT_DEVICE, }, { - .virtual = CNS3XXX_GPIOA_BASE_VIRT, - .pfn = __phys_to_pfn(CNS3XXX_GPIOA_BASE), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = CNS3XXX_GPIOB_BASE_VIRT, - .pfn = __phys_to_pfn(CNS3XXX_GPIOB_BASE), - .length = SZ_4K, - .type = MT_DEVICE, - }, { .virtual = CNS3XXX_MISC_BASE_VIRT, .pfn = __phys_to_pfn(CNS3XXX_MISC_BASE), .length = SZ_4K, @@ -266,3 +262,116 @@ void __init cns3xxx_l2x0_init(void) } #endif /* CONFIG_CACHE_L2X0 */ + +static int csn3xxx_usb_power_on(struct platform_device *pdev) +{ + /* + * EHCI and OHCI share the same clock and power, + * resetting twice would cause the 1st controller been reset. + * Therefore only do power up at the first up device, and + * power down at the last down device. + * + * Set USB AHB INCR length to 16 + */ + if (atomic_inc_return(&usb_pwr_ref) == 1) { + cns3xxx_pwr_power_up(1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_USB); + cns3xxx_pwr_clk_en(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST); + cns3xxx_pwr_soft_rst(1 << PM_SOFT_RST_REG_OFFST_USB_HOST); + __raw_writel((__raw_readl(MISC_CHIP_CONFIG_REG) | (0X2 << 24)), + MISC_CHIP_CONFIG_REG); + } + + return 0; +} + +static void csn3xxx_usb_power_off(struct platform_device *pdev) +{ + /* + * EHCI and OHCI share the same clock and power, + * resetting twice would cause the 1st controller been reset. + * Therefore only do power up at the first up device, and + * power down at the last down device. + */ + if (atomic_dec_return(&usb_pwr_ref) == 0) + cns3xxx_pwr_clk_dis(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST); +} + +static struct usb_ehci_pdata cns3xxx_usb_ehci_pdata = { + .power_on = csn3xxx_usb_power_on, + .power_off = csn3xxx_usb_power_off, +}; + +static struct usb_ohci_pdata cns3xxx_usb_ohci_pdata = { + .num_ports = 1, + .power_on = csn3xxx_usb_power_on, + .power_off = csn3xxx_usb_power_off, +}; + +static struct of_dev_auxdata cns3xxx_auxdata[] __initconst = { + { "intel,usb-ehci", CNS3XXX_USB_BASE, "ehci-platform", &cns3xxx_usb_ehci_pdata }, + { "intel,usb-ohci", CNS3XXX_USB_OHCI_BASE, "ohci-platform", &cns3xxx_usb_ohci_pdata }, + { "cavium,cns3420-ahci", CNS3XXX_SATA2_BASE, "ahci", NULL }, + { "cavium,cns3420-sdhci", CNS3XXX_SDIO_BASE, "ahci", NULL }, + {}, +}; + +static void __init cns3xxx_init(void) +{ + struct device_node *dn; + + cns3xxx_l2x0_init(); + + dn = of_find_compatible_node(NULL, NULL, "cavium,cns3420-ahci"); + if (of_device_is_available(dn)) { + u32 tmp; + + tmp = __raw_readl(MISC_SATA_POWER_MODE); + tmp |= 0x1 << 16; /* Disable SATA PHY 0 from SLUMBER Mode */ + tmp |= 0x1 << 17; /* Disable SATA PHY 1 from SLUMBER Mode */ + __raw_writel(tmp, MISC_SATA_POWER_MODE); + + /* Enable SATA PHY */ + cns3xxx_pwr_power_up(0x1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY0); + cns3xxx_pwr_power_up(0x1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY1); + + /* Enable SATA Clock */ + cns3xxx_pwr_clk_en(0x1 << PM_CLK_GATE_REG_OFFSET_SATA); + + /* De-Asscer SATA Reset */ + cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SATA)); + } + + dn = of_find_compatible_node(NULL, NULL, "cavium,cns3420-sdhci"); + if (of_device_is_available(dn)) { + u32 __iomem *gpioa = IOMEM(CNS3XXX_MISC_BASE_VIRT + 0x0014); + u32 gpioa_pins = __raw_readl(gpioa); + + /* MMC/SD pins share with GPIOA */ + gpioa_pins |= 0x1fff0004; + __raw_writel(gpioa_pins, gpioa); + + cns3xxx_pwr_clk_en(CNS3XXX_PWR_CLK_EN(SDIO)); + cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SDIO)); + } + + pm_power_off = cns3xxx_power_off; + + of_platform_populate(NULL, of_default_bus_match_table, + cns3xxx_auxdata, NULL); +} + +static const char *cns3xxx_dt_compat[] __initdata = { + "cavium,cns3410", + "cavium,cns3420", + NULL, +}; + +DT_MACHINE_START(CNS3XXX_DT, "Cavium Networks CNS3xxx") + .dt_compat = cns3xxx_dt_compat, + .nr_irqs = NR_IRQS_CNS3XXX, + .map_io = cns3xxx_map_io, + .init_irq = cns3xxx_init_irq, + .init_time = cns3xxx_timer_init, + .init_machine = cns3xxx_init, + .restart = cns3xxx_restart, +MACHINE_END diff --git a/arch/arm/mach-cns3xxx/devices.c b/arch/arm/mach-cns3xxx/devices.c index 1e40c99b015f..7da78a2451f1 100644 --- a/arch/arm/mach-cns3xxx/devices.c +++ b/arch/arm/mach-cns3xxx/devices.c @@ -16,9 +16,8 @@ #include <linux/compiler.h> #include <linux/dma-mapping.h> #include <linux/platform_device.h> -#include <mach/cns3xxx.h> -#include <mach/irqs.h> -#include <mach/pm.h> +#include "cns3xxx.h" +#include "pm.h" #include "core.h" #include "devices.h" diff --git a/arch/arm/mach-cns3xxx/include/mach/irqs.h b/arch/arm/mach-cns3xxx/include/mach/irqs.h deleted file mode 100644 index 2ab96f8085c8..000000000000 --- a/arch/arm/mach-cns3xxx/include/mach/irqs.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * Copyright 2000 Deep Blue Solutions Ltd. - * Copyright 2003 ARM Limited - * Copyright 2008 Cavium Networks - * - * This file is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, Version 2, as - * published by the Free Software Foundation. - */ - -#ifndef __MACH_IRQS_H -#define __MACH_IRQS_H - -#define IRQ_LOCALTIMER 29 -#define IRQ_LOCALWDOG 30 -#define IRQ_TC11MP_GIC_START 32 - -#include <mach/cns3xxx.h> - -#ifndef NR_IRQS -#error "NR_IRQS not defined by the board-specific files" -#endif - -#endif diff --git a/arch/arm/mach-cns3xxx/include/mach/timex.h b/arch/arm/mach-cns3xxx/include/mach/timex.h deleted file mode 100644 index 1fd04217cacb..000000000000 --- a/arch/arm/mach-cns3xxx/include/mach/timex.h +++ /dev/null @@ -1,12 +0,0 @@ -/* - * Cavium Networks architecture timex specifications - * - * Copyright 2003 ARM Limited - * Copyright 2008 Cavium Networks - * - * This file is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, Version 2, as - * published by the Free Software Foundation. - */ - -#define CLOCK_TICK_RATE (50000000 / 16) diff --git a/arch/arm/mach-cns3xxx/include/mach/uncompress.h b/arch/arm/mach-cns3xxx/include/mach/uncompress.h deleted file mode 100644 index 7a030b99df84..000000000000 --- a/arch/arm/mach-cns3xxx/include/mach/uncompress.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * Copyright 2003 ARM Limited - * Copyright 2008 Cavium Networks - * - * This file is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, Version 2, as - * published by the Free Software Foundation. - */ - -#include <asm/mach-types.h> -#include <mach/cns3xxx.h> - -#define AMBA_UART_DR(base) (*(volatile unsigned char *)((base) + 0x00)) -#define AMBA_UART_LCRH(base) (*(volatile unsigned char *)((base) + 0x2c)) -#define AMBA_UART_CR(base) (*(volatile unsigned char *)((base) + 0x30)) -#define AMBA_UART_FR(base) (*(volatile unsigned char *)((base) + 0x18)) - -/* - * Return the UART base address - */ -static inline unsigned long get_uart_base(void) -{ - if (machine_is_cns3420vb()) - return CNS3XXX_UART0_BASE; - else - return 0; -} - -/* - * This does not append a newline - */ -static inline void putc(int c) -{ - unsigned long base = get_uart_base(); - - while (AMBA_UART_FR(base) & (1 << 5)) - barrier(); - - AMBA_UART_DR(base) = c; -} - -static inline void flush(void) -{ - unsigned long base = get_uart_base(); - - while (AMBA_UART_FR(base) & (1 << 3)) - barrier(); -} - -/* - * nothing to do - */ -#define arch_decomp_setup() diff --git a/arch/arm/mach-cns3xxx/pcie.c b/arch/arm/mach-cns3xxx/pcie.c index 311328314163..c7b204bff386 100644 --- a/arch/arm/mach-cns3xxx/pcie.c +++ b/arch/arm/mach-cns3xxx/pcie.c @@ -20,7 +20,7 @@ #include <linux/interrupt.h> #include <linux/ptrace.h> #include <asm/mach/map.h> -#include <mach/cns3xxx.h> +#include "cns3xxx.h" #include "core.h" enum cns3xxx_access_type { diff --git a/arch/arm/mach-cns3xxx/pm.c b/arch/arm/mach-cns3xxx/pm.c index 36458080332a..79e3d47aad65 100644 --- a/arch/arm/mach-cns3xxx/pm.c +++ b/arch/arm/mach-cns3xxx/pm.c @@ -11,8 +11,8 @@ #include <linux/io.h> #include <linux/delay.h> #include <linux/atomic.h> -#include <mach/cns3xxx.h> -#include <mach/pm.h> +#include "cns3xxx.h" +#include "pm.h" #include "core.h" void cns3xxx_pwr_clk_en(unsigned int block) diff --git a/arch/arm/mach-cns3xxx/include/mach/pm.h b/arch/arm/mach-cns3xxx/pm.h index c2588cc991d1..c2588cc991d1 100644 --- a/arch/arm/mach-cns3xxx/include/mach/pm.h +++ b/arch/arm/mach-cns3xxx/pm.h diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index fb5c1aa98a63..dd1ffccc75e9 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile @@ -37,7 +37,6 @@ obj-$(CONFIG_MACH_MITYOMAPL138) += board-mityomapl138.o obj-$(CONFIG_MACH_OMAPL138_HAWKBOARD) += board-omapl138-hawk.o # Power Management -obj-$(CONFIG_CPU_FREQ) += cpufreq.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_SUSPEND) += pm.o sleep.o obj-$(CONFIG_HAVE_CLK) += pm_domain.o diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c index 6da25eebf911..1332de8c52c9 100644 --- a/arch/arm/mach-davinci/board-da830-evm.c +++ b/arch/arm/mach-davinci/board-da830-evm.c @@ -246,7 +246,6 @@ static struct davinci_mmc_config da830_evm_mmc_config = { .wires = 8, .max_freq = 50000000, .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, - .version = MMC_CTLR_VERSION_2, }; static inline void da830_evm_init_mmc(void) @@ -298,11 +297,7 @@ static const short da830_evm_emif25_pins[] = { -1 }; -#if defined(CONFIG_MMC_DAVINCI) || defined(CONFIG_MMC_DAVINCI_MODULE) -#define HAS_MMC 1 -#else -#define HAS_MMC 0 -#endif +#define HAS_MMC IS_ENABLED(CONFIG_MMC_DAVINCI) #ifdef CONFIG_DA830_UI_NAND static struct mtd_partition da830_evm_nand_partitions[] = { diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index c2dfe06563df..8a24b6c6339f 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -335,12 +335,7 @@ static const short da850_evm_nor_pins[] = { -1 }; -#if defined(CONFIG_MMC_DAVINCI) || \ - defined(CONFIG_MMC_DAVINCI_MODULE) -#define HAS_MMC 1 -#else -#define HAS_MMC 0 -#endif +#define HAS_MMC IS_ENABLED(CONFIG_MMC_DAVINCI) static inline void da850_evm_setup_nor_nand(void) { @@ -401,7 +396,7 @@ enum da850_evm_ui_exp_pins { DA850_EVM_UI_EXP_PB1, }; -static const char const *da850_evm_ui_exp[] = { +static const char * const da850_evm_ui_exp[] = { [DA850_EVM_UI_EXP_SEL_C] = "sel_c", [DA850_EVM_UI_EXP_SEL_B] = "sel_b", [DA850_EVM_UI_EXP_SEL_A] = "sel_a", @@ -565,7 +560,7 @@ enum da850_evm_bb_exp_pins { DA850_EVM_BB_EXP_USER_SW8 }; -static const char const *da850_evm_bb_exp[] = { +static const char * const da850_evm_bb_exp[] = { [DA850_EVM_BB_EXP_DEEP_SLEEP_EN] = "deep_sleep_en", [DA850_EVM_BB_EXP_SW_RST] = "sw_rst", [DA850_EVM_BB_EXP_TP_23] = "tp_23", @@ -802,7 +797,6 @@ static struct davinci_mmc_config da850_mmc_config = { .wires = 4, .max_freq = 50000000, .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, - .version = MMC_CTLR_VERSION_2, }; static const short da850_evm_mmcsd0_pins[] __initconst = { @@ -1372,7 +1366,6 @@ static struct davinci_mmc_config da850_wl12xx_mmc_config = { .max_freq = 25000000, .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_NONREMOVABLE | MMC_CAP_POWER_OFF_CARD, - .version = MMC_CTLR_VERSION_2, }; static const short da850_wl12xx_pins[] __initconst = { @@ -1579,6 +1572,11 @@ static __init void da850_evm_init(void) pr_warn("%s: SATA registration failed: %d\n", __func__, ret); da850_evm_setup_mac_addr(); + + ret = da8xx_register_rproc(); + if (ret) + pr_warn("%s: dsp/rproc registration failed: %d\n", + __func__, ret); } #ifdef CONFIG_SERIAL_8250_CONSOLE @@ -1606,4 +1604,5 @@ MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138/AM18x EVM") .init_late = davinci_init_late, .dma_zone_size = SZ_128M, .restart = da8xx_restart, + .reserve = da8xx_rproc_reserve_cma, MACHINE_END diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c index 147b8e1a4407..c2a0a67d09e0 100644 --- a/arch/arm/mach-davinci/board-dm355-evm.c +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -242,6 +242,73 @@ static struct vpfe_config vpfe_cfg = { .ccdc = "DM355 CCDC", }; +/* venc standards timings */ +static struct vpbe_enc_mode_info dm355evm_enc_preset_timing[] = { + { + .name = "ntsc", + .timings_type = VPBE_ENC_STD, + .std_id = V4L2_STD_NTSC, + .interlaced = 1, + .xres = 720, + .yres = 480, + .aspect = {11, 10}, + .fps = {30000, 1001}, + .left_margin = 0x79, + .upper_margin = 0x10, + }, + { + .name = "pal", + .timings_type = VPBE_ENC_STD, + .std_id = V4L2_STD_PAL, + .interlaced = 1, + .xres = 720, + .yres = 576, + .aspect = {54, 59}, + .fps = {25, 1}, + .left_margin = 0x7E, + .upper_margin = 0x16 + }, +}; + +#define VENC_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL) + +/* + * The outputs available from VPBE + ecnoders. Keep the + * the order same as that of encoders. First those from venc followed by that + * from encoders. Index in the output refers to index on a particular encoder. + * Driver uses this index to pass it to encoder when it supports more than + * one output. Application uses index of the array to set an output. + */ +static struct vpbe_output dm355evm_vpbe_outputs[] = { + { + .output = { + .index = 0, + .name = "Composite", + .type = V4L2_OUTPUT_TYPE_ANALOG, + .std = VENC_STD_ALL, + .capabilities = V4L2_OUT_CAP_STD, + }, + .subdev_name = DM355_VPBE_VENC_SUBDEV_NAME, + .default_mode = "ntsc", + .num_modes = ARRAY_SIZE(dm355evm_enc_preset_timing), + .modes = dm355evm_enc_preset_timing, + .if_params = V4L2_MBUS_FMT_FIXED, + }, +}; + +static struct vpbe_config dm355evm_display_cfg = { + .module_name = "dm355-vpbe-display", + .i2c_adapter_id = 1, + .osd = { + .module_name = DM355_VPBE_OSD_SUBDEV_NAME, + }, + .venc = { + .module_name = DM355_VPBE_VENC_SUBDEV_NAME, + }, + .num_outputs = ARRAY_SIZE(dm355evm_vpbe_outputs), + .outputs = dm355evm_vpbe_outputs, +}; + static struct platform_device *davinci_evm_devices[] __initdata = { &dm355evm_dm9000, &davinci_nand_device, @@ -253,8 +320,6 @@ static struct davinci_uart_config uart_config __initdata = { static void __init dm355_evm_map_io(void) { - /* setup input configuration for VPFE input devices */ - dm355_set_vpfe_config(&vpfe_cfg); dm355_init(); } @@ -280,7 +345,6 @@ static struct davinci_mmc_config dm355evm_mmc_config = { .wires = 4, .max_freq = 50000000, .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, - .version = MMC_CTLR_VERSION_1, }; /* Don't connect anything to J10 unless you're only using USB host @@ -344,6 +408,8 @@ static __init void dm355_evm_init(void) davinci_setup_mmc(0, &dm355evm_mmc_config); davinci_setup_mmc(1, &dm355evm_mmc_config); + dm355_init_video(&vpfe_cfg, &dm355evm_display_cfg); + dm355_init_spi0(BIT(0), dm355_evm_spi_info, ARRAY_SIZE(dm355_evm_spi_info)); diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index c2d4958a0cb6..fd38c8d22e3c 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -27,6 +27,7 @@ #include <linux/input.h> #include <linux/spi/spi.h> #include <linux/spi/eeprom.h> +#include <linux/v4l2-dv-timings.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -39,6 +40,7 @@ #include <linux/platform_data/mtd-davinci.h> #include <linux/platform_data/keyscan-davinci.h> +#include <media/ths7303.h> #include <media/tvp514x.h> #include "davinci.h" @@ -253,7 +255,6 @@ static struct davinci_mmc_config dm365evm_mmc_config = { .wires = 4, .max_freq = 50000000, .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, - .version = MMC_CTLR_VERSION_2, }; static void dm365evm_emac_configure(void) @@ -374,6 +375,166 @@ static struct vpfe_config vpfe_cfg = { .ccdc = "ISIF", }; +/* venc standards timings */ +static struct vpbe_enc_mode_info dm365evm_enc_std_timing[] = { + { + .name = "ntsc", + .timings_type = VPBE_ENC_STD, + .std_id = V4L2_STD_NTSC, + .interlaced = 1, + .xres = 720, + .yres = 480, + .aspect = {11, 10}, + .fps = {30000, 1001}, + .left_margin = 0x79, + .upper_margin = 0x10, + }, + { + .name = "pal", + .timings_type = VPBE_ENC_STD, + .std_id = V4L2_STD_PAL, + .interlaced = 1, + .xres = 720, + .yres = 576, + .aspect = {54, 59}, + .fps = {25, 1}, + .left_margin = 0x7E, + .upper_margin = 0x16, + }, +}; + +/* venc dv timings */ +static struct vpbe_enc_mode_info dm365evm_enc_preset_timing[] = { + { + .name = "480p59_94", + .timings_type = VPBE_ENC_DV_TIMINGS, + .dv_timings = V4L2_DV_BT_CEA_720X480P59_94, + .interlaced = 0, + .xres = 720, + .yres = 480, + .aspect = {1, 1}, + .fps = {5994, 100}, + .left_margin = 0x8F, + .upper_margin = 0x2D, + }, + { + .name = "576p50", + .timings_type = VPBE_ENC_DV_TIMINGS, + .dv_timings = V4L2_DV_BT_CEA_720X576P50, + .interlaced = 0, + .xres = 720, + .yres = 576, + .aspect = {1, 1}, + .fps = {50, 1}, + .left_margin = 0x8C, + .upper_margin = 0x36, + }, + { + .name = "720p60", + .timings_type = VPBE_ENC_DV_TIMINGS, + .dv_timings = V4L2_DV_BT_CEA_1280X720P60, + .interlaced = 0, + .xres = 1280, + .yres = 720, + .aspect = {1, 1}, + .fps = {60, 1}, + .left_margin = 0x117, + .right_margin = 70, + .upper_margin = 38, + .lower_margin = 3, + .hsync_len = 80, + .vsync_len = 5, + }, + { + .name = "1080i60", + .timings_type = VPBE_ENC_DV_TIMINGS, + .dv_timings = V4L2_DV_BT_CEA_1920X1080I60, + .interlaced = 1, + .xres = 1920, + .yres = 1080, + .aspect = {1, 1}, + .fps = {30, 1}, + .left_margin = 0xc9, + .right_margin = 80, + .upper_margin = 30, + .lower_margin = 3, + .hsync_len = 88, + .vsync_len = 5, + }, +}; + +#define VENC_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL) + +/* + * The outputs available from VPBE + ecnoders. Keep the + * the order same as that of encoders. First those from venc followed by that + * from encoders. Index in the output refers to index on a particular + * encoder.Driver uses this index to pass it to encoder when it supports more + * than one output. Application uses index of the array to set an output. + */ +static struct vpbe_output dm365evm_vpbe_outputs[] = { + { + .output = { + .index = 0, + .name = "Composite", + .type = V4L2_OUTPUT_TYPE_ANALOG, + .std = VENC_STD_ALL, + .capabilities = V4L2_OUT_CAP_STD, + }, + .subdev_name = DM365_VPBE_VENC_SUBDEV_NAME, + .default_mode = "ntsc", + .num_modes = ARRAY_SIZE(dm365evm_enc_std_timing), + .modes = dm365evm_enc_std_timing, + .if_params = V4L2_MBUS_FMT_FIXED, + }, + { + .output = { + .index = 1, + .name = "Component", + .type = V4L2_OUTPUT_TYPE_ANALOG, + .capabilities = V4L2_OUT_CAP_DV_TIMINGS, + }, + .subdev_name = DM365_VPBE_VENC_SUBDEV_NAME, + .default_mode = "480p59_94", + .num_modes = ARRAY_SIZE(dm365evm_enc_preset_timing), + .modes = dm365evm_enc_preset_timing, + .if_params = V4L2_MBUS_FMT_FIXED, + }, +}; + +/* + * Amplifiers on the board + */ +struct ths7303_platform_data ths7303_pdata = { + .ch_1 = 3, + .ch_2 = 3, + .ch_3 = 3, + .init_enable = 1, +}; + +static struct amp_config_info vpbe_amp = { + .module_name = "ths7303", + .is_i2c = 1, + .board_info = { + I2C_BOARD_INFO("ths7303", 0x2c), + .platform_data = &ths7303_pdata, + } +}; + +static struct vpbe_config dm365evm_display_cfg = { + .module_name = "dm365-vpbe-display", + .i2c_adapter_id = 1, + .amp = &vpbe_amp, + .osd = { + .module_name = DM365_VPBE_OSD_SUBDEV_NAME, + }, + .venc = { + .module_name = DM365_VPBE_VENC_SUBDEV_NAME, + }, + .num_outputs = ARRAY_SIZE(dm365evm_vpbe_outputs), + .outputs = dm365evm_vpbe_outputs, +}; + static void __init evm_init_i2c(void) { davinci_init_i2c(&i2c_pdata); @@ -564,8 +725,6 @@ static struct davinci_uart_config uart_config __initdata = { static void __init dm365_evm_map_io(void) { - /* setup input configuration for VPFE input devices */ - dm365_set_vpfe_config(&vpfe_cfg); dm365_init(); } @@ -597,6 +756,8 @@ static __init void dm365_evm_init(void) davinci_setup_mmc(0, &dm365evm_mmc_config); + dm365_init_video(&vpfe_cfg, &dm365evm_display_cfg); + /* maybe setup mmc1/etc ... _after_ mmc0 */ evm_init_cpld(); diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index 71735e7797cc..a33686a6fbb2 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -570,7 +570,6 @@ static struct davinci_mmc_config dm6446evm_mmc_config = { .get_cd = dm6444evm_mmc_get_cd, .get_ro = dm6444evm_mmc_get_ro, .wires = 4, - .version = MMC_CTLR_VERSION_1 }; static struct i2c_board_info __initdata i2c_info[] = { @@ -622,7 +621,7 @@ static struct vpbe_enc_mode_info dm644xevm_enc_std_timing[] = { { .name = "ntsc", .timings_type = VPBE_ENC_STD, - .std_id = V4L2_STD_525_60, + .std_id = V4L2_STD_NTSC, .interlaced = 1, .xres = 720, .yres = 480, @@ -634,7 +633,7 @@ static struct vpbe_enc_mode_info dm644xevm_enc_std_timing[] = { { .name = "pal", .timings_type = VPBE_ENC_STD, - .std_id = V4L2_STD_625_50, + .std_id = V4L2_STD_PAL, .interlaced = 1, .xres = 720, .yres = 576, @@ -649,7 +648,7 @@ static struct vpbe_enc_mode_info dm644xevm_enc_std_timing[] = { static struct vpbe_enc_mode_info dm644xevm_enc_preset_timing[] = { { .name = "480p59_94", - .timings_type = VPBE_ENC_CUSTOM_TIMINGS, + .timings_type = VPBE_ENC_DV_TIMINGS, .dv_timings = V4L2_DV_BT_CEA_720X480P59_94, .interlaced = 0, .xres = 720, @@ -661,7 +660,7 @@ static struct vpbe_enc_mode_info dm644xevm_enc_preset_timing[] = { }, { .name = "576p50", - .timings_type = VPBE_ENC_CUSTOM_TIMINGS, + .timings_type = VPBE_ENC_DV_TIMINGS, .dv_timings = V4L2_DV_BT_CEA_720X576P50, .interlaced = 0, .xres = 720, @@ -750,26 +749,11 @@ static int davinci_phy_fixup(struct phy_device *phydev) return 0; } -#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ - defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) -#define HAS_ATA 1 -#else -#define HAS_ATA 0 -#endif - -#if defined(CONFIG_MTD_PHYSMAP) || \ - defined(CONFIG_MTD_PHYSMAP_MODULE) -#define HAS_NOR 1 -#else -#define HAS_NOR 0 -#endif - -#if defined(CONFIG_MTD_NAND_DAVINCI) || \ - defined(CONFIG_MTD_NAND_DAVINCI_MODULE) -#define HAS_NAND 1 -#else -#define HAS_NAND 0 -#endif +#define HAS_ATA IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710) + +#define HAS_NOR IS_ENABLED(CONFIG_MTD_PHYSMAP) + +#define HAS_NAND IS_ENABLED(CONFIG_MTD_NAND_DAVINCI) static __init void davinci_evm_init(void) { diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index de7adff324dc..fbb8e5ab1dc1 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -117,12 +117,7 @@ static struct platform_device davinci_nand_device = { }, }; -#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ - defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) -#define HAS_ATA 1 -#else -#define HAS_ATA 0 -#endif +#define HAS_ATA IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710) /* CPLD Register 0 bits to control ATA */ #define DM646X_EVM_ATA_RST BIT(0) @@ -514,7 +509,7 @@ static const struct vpif_output dm6467_ch0_outputs[] = { .index = 1, .name = "Component", .type = V4L2_OUTPUT_TYPE_ANALOG, - .capabilities = V4L2_OUT_CAP_CUSTOM_TIMINGS, + .capabilities = V4L2_OUT_CAP_DV_TIMINGS, }, .subdev_name = "adv7343", .output_route = ADV7343_COMPONENT_ID, diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c index 1c98107527fa..2bc112adf565 100644 --- a/arch/arm/mach-davinci/board-neuros-osd2.c +++ b/arch/arm/mach-davinci/board-neuros-osd2.c @@ -164,23 +164,11 @@ static void __init davinci_ntosd2_map_io(void) static struct davinci_mmc_config davinci_ntosd2_mmc_config = { .wires = 4, - .version = MMC_CTLR_VERSION_1 }; +#define HAS_ATA IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710) -#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ - defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) -#define HAS_ATA 1 -#else -#define HAS_ATA 0 -#endif - -#if defined(CONFIG_MTD_NAND_DAVINCI) || \ - defined(CONFIG_MTD_NAND_DAVINCI_MODULE) -#define HAS_NAND 1 -#else -#define HAS_NAND 0 -#endif +#define HAS_NAND IS_ENABLED(CONFIG_MTD_NAND_DAVINCI) static __init void davinci_ntosd2_init(void) { diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c index 5a2bd44da54d..b8c20de10ca2 100644 --- a/arch/arm/mach-davinci/board-omapl138-hawk.c +++ b/arch/arm/mach-davinci/board-omapl138-hawk.c @@ -136,7 +136,6 @@ static struct davinci_mmc_config da850_mmc_config = { .wires = 4, .max_freq = 50000000, .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, - .version = MMC_CTLR_VERSION_2, }; static __init void omapl138_hawk_mmc_init(void) @@ -311,6 +310,11 @@ static __init void omapl138_hawk_init(void) if (ret) pr_warn("%s: watchdog registration failed: %d\n", __func__, ret); + + ret = da8xx_register_rproc(); + if (ret) + pr_warn("%s: dsp/rproc registration failed: %d\n", + __func__, ret); } #ifdef CONFIG_SERIAL_8250_CONSOLE @@ -338,4 +342,5 @@ MACHINE_START(OMAPL138_HAWKBOARD, "AM18x/OMAP-L138 Hawkboard") .init_late = davinci_init_late, .dma_zone_size = SZ_128M, .restart = da8xx_restart, + .reserve = da8xx_rproc_reserve_cma, MACHINE_END diff --git a/arch/arm/mach-davinci/board-tnetv107x-evm.c b/arch/arm/mach-davinci/board-tnetv107x-evm.c index 4f416023d4e2..ba798370fc96 100644 --- a/arch/arm/mach-davinci/board-tnetv107x-evm.c +++ b/arch/arm/mach-davinci/board-tnetv107x-evm.c @@ -85,7 +85,6 @@ static struct davinci_mmc_config mmc_config = { .wires = 4, .max_freq = 50000000, .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, - .version = MMC_CTLR_VERSION_1, }; static const short sdio1_pins[] __initconst = { diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c index d458558ee84a..dc9a470ff9c5 100644 --- a/arch/arm/mach-davinci/clock.c +++ b/arch/arm/mach-davinci/clock.c @@ -35,19 +35,26 @@ static void __clk_enable(struct clk *clk) { if (clk->parent) __clk_enable(clk->parent); - if (clk->usecount++ == 0 && (clk->flags & CLK_PSC)) - davinci_psc_config(clk->domain, clk->gpsc, clk->lpsc, - true, clk->flags); + if (clk->usecount++ == 0) { + if (clk->flags & CLK_PSC) + davinci_psc_config(clk->domain, clk->gpsc, clk->lpsc, + true, clk->flags); + else if (clk->clk_enable) + clk->clk_enable(clk); + } } static void __clk_disable(struct clk *clk) { if (WARN_ON(clk->usecount == 0)) return; - if (--clk->usecount == 0 && !(clk->flags & CLK_PLL) && - (clk->flags & CLK_PSC)) - davinci_psc_config(clk->domain, clk->gpsc, clk->lpsc, - false, clk->flags); + if (--clk->usecount == 0) { + if (!(clk->flags & CLK_PLL) && (clk->flags & CLK_PSC)) + davinci_psc_config(clk->domain, clk->gpsc, clk->lpsc, + false, clk->flags); + else if (clk->clk_disable) + clk->clk_disable(clk); + } if (clk->parent) __clk_disable(clk->parent); } diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h index 8694b395fc92..1e4e836173a1 100644 --- a/arch/arm/mach-davinci/clock.h +++ b/arch/arm/mach-davinci/clock.h @@ -104,6 +104,8 @@ struct clk { int (*set_rate) (struct clk *clk, unsigned long rate); int (*round_rate) (struct clk *clk, unsigned long rate); int (*reset) (struct clk *clk, bool reset); + void (*clk_enable) (struct clk *clk); + void (*clk_disable) (struct clk *clk); }; /* Clock flags: SoC-specific flags start at BIT(16) */ diff --git a/arch/arm/mach-davinci/cpufreq.c b/arch/arm/mach-davinci/cpufreq.c deleted file mode 100644 index 4729eaab0f40..000000000000 --- a/arch/arm/mach-davinci/cpufreq.c +++ /dev/null @@ -1,248 +0,0 @@ -/* - * CPU frequency scaling for DaVinci - * - * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/ - * - * Based on linux/arch/arm/plat-omap/cpu-omap.c. Original Copyright follows: - * - * Copyright (C) 2005 Nokia Corporation - * Written by Tony Lindgren <tony@atomide.com> - * - * Based on cpu-sa1110.c, Copyright (C) 2001 Russell King - * - * Copyright (C) 2007-2008 Texas Instruments, Inc. - * Updated to support OMAP3 - * Rajendra Nayak <rnayak@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/types.h> -#include <linux/cpufreq.h> -#include <linux/init.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/platform_device.h> -#include <linux/export.h> - -#include <mach/hardware.h> -#include <mach/cpufreq.h> -#include <mach/common.h> - -#include "clock.h" - -struct davinci_cpufreq { - struct device *dev; - struct clk *armclk; - struct clk *asyncclk; - unsigned long asyncrate; -}; -static struct davinci_cpufreq cpufreq; - -static int davinci_verify_speed(struct cpufreq_policy *policy) -{ - struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data; - struct cpufreq_frequency_table *freq_table = pdata->freq_table; - struct clk *armclk = cpufreq.armclk; - - if (freq_table) - return cpufreq_frequency_table_verify(policy, freq_table); - - if (policy->cpu) - return -EINVAL; - - cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, - policy->cpuinfo.max_freq); - - policy->min = clk_round_rate(armclk, policy->min * 1000) / 1000; - policy->max = clk_round_rate(armclk, policy->max * 1000) / 1000; - cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, - policy->cpuinfo.max_freq); - return 0; -} - -static unsigned int davinci_getspeed(unsigned int cpu) -{ - if (cpu) - return 0; - - return clk_get_rate(cpufreq.armclk) / 1000; -} - -static int davinci_target(struct cpufreq_policy *policy, - unsigned int target_freq, unsigned int relation) -{ - int ret = 0; - unsigned int idx; - struct cpufreq_freqs freqs; - struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data; - struct clk *armclk = cpufreq.armclk; - - /* - * Ensure desired rate is within allowed range. Some govenors - * (ondemand) will just pass target_freq=0 to get the minimum. - */ - if (target_freq < policy->cpuinfo.min_freq) - target_freq = policy->cpuinfo.min_freq; - if (target_freq > policy->cpuinfo.max_freq) - target_freq = policy->cpuinfo.max_freq; - - freqs.old = davinci_getspeed(0); - freqs.new = clk_round_rate(armclk, target_freq * 1000) / 1000; - freqs.cpu = 0; - - if (freqs.old == freqs.new) - return ret; - - dev_dbg(cpufreq.dev, "transition: %u --> %u\n", freqs.old, freqs.new); - - ret = cpufreq_frequency_table_target(policy, pdata->freq_table, - freqs.new, relation, &idx); - if (ret) - return -EINVAL; - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - /* if moving to higher frequency, up the voltage beforehand */ - if (pdata->set_voltage && freqs.new > freqs.old) { - ret = pdata->set_voltage(idx); - if (ret) - goto out; - } - - ret = clk_set_rate(armclk, idx); - if (ret) - goto out; - - if (cpufreq.asyncclk) { - ret = clk_set_rate(cpufreq.asyncclk, cpufreq.asyncrate); - if (ret) - goto out; - } - - /* if moving to lower freq, lower the voltage after lowering freq */ - if (pdata->set_voltage && freqs.new < freqs.old) - pdata->set_voltage(idx); - -out: - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - return ret; -} - -static int davinci_cpu_init(struct cpufreq_policy *policy) -{ - int result = 0; - struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data; - struct cpufreq_frequency_table *freq_table = pdata->freq_table; - - if (policy->cpu != 0) - return -EINVAL; - - /* Finish platform specific initialization */ - if (pdata->init) { - result = pdata->init(); - if (result) - return result; - } - - policy->cur = policy->min = policy->max = davinci_getspeed(0); - - if (freq_table) { - result = cpufreq_frequency_table_cpuinfo(policy, freq_table); - if (!result) - cpufreq_frequency_table_get_attr(freq_table, - policy->cpu); - } else { - policy->cpuinfo.min_freq = policy->min; - policy->cpuinfo.max_freq = policy->max; - } - - policy->min = policy->cpuinfo.min_freq; - policy->max = policy->cpuinfo.max_freq; - policy->cur = davinci_getspeed(0); - - /* - * Time measurement across the target() function yields ~1500-1800us - * time taken with no drivers on notification list. - * Setting the latency to 2000 us to accommodate addition of drivers - * to pre/post change notification list. - */ - policy->cpuinfo.transition_latency = 2000 * 1000; - return 0; -} - -static int davinci_cpu_exit(struct cpufreq_policy *policy) -{ - cpufreq_frequency_table_put_attr(policy->cpu); - return 0; -} - -static struct freq_attr *davinci_cpufreq_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static struct cpufreq_driver davinci_driver = { - .flags = CPUFREQ_STICKY, - .verify = davinci_verify_speed, - .target = davinci_target, - .get = davinci_getspeed, - .init = davinci_cpu_init, - .exit = davinci_cpu_exit, - .name = "davinci", - .attr = davinci_cpufreq_attr, -}; - -static int __init davinci_cpufreq_probe(struct platform_device *pdev) -{ - struct davinci_cpufreq_config *pdata = pdev->dev.platform_data; - struct clk *asyncclk; - - if (!pdata) - return -EINVAL; - if (!pdata->freq_table) - return -EINVAL; - - cpufreq.dev = &pdev->dev; - - cpufreq.armclk = clk_get(NULL, "arm"); - if (IS_ERR(cpufreq.armclk)) { - dev_err(cpufreq.dev, "Unable to get ARM clock\n"); - return PTR_ERR(cpufreq.armclk); - } - - asyncclk = clk_get(cpufreq.dev, "async"); - if (!IS_ERR(asyncclk)) { - cpufreq.asyncclk = asyncclk; - cpufreq.asyncrate = clk_get_rate(asyncclk); - } - - return cpufreq_register_driver(&davinci_driver); -} - -static int __exit davinci_cpufreq_remove(struct platform_device *pdev) -{ - clk_put(cpufreq.armclk); - - if (cpufreq.asyncclk) - clk_put(cpufreq.asyncclk); - - return cpufreq_unregister_driver(&davinci_driver); -} - -static struct platform_driver davinci_cpufreq_driver = { - .driver = { - .name = "cpufreq-davinci", - .owner = THIS_MODULE, - }, - .remove = __exit_p(davinci_cpufreq_remove), -}; - -int __init davinci_cpufreq_init(void) -{ - return platform_driver_probe(&davinci_cpufreq_driver, - davinci_cpufreq_probe); -} - diff --git a/arch/arm/mach-davinci/cpuidle.c b/arch/arm/mach-davinci/cpuidle.c index 5ac9e9384b15..36aef3a7dedb 100644 --- a/arch/arm/mach-davinci/cpuidle.c +++ b/arch/arm/mach-davinci/cpuidle.c @@ -25,7 +25,6 @@ #define DAVINCI_CPUIDLE_MAX_STATES 2 -static DEFINE_PER_CPU(struct cpuidle_device, davinci_cpuidle_device); static void __iomem *ddr2_reg_base; static bool ddr2_pdown; @@ -50,14 +49,10 @@ static void davinci_save_ddr_power(int enter, bool pdown) /* Actual code that puts the SoC in different idle states */ static int davinci_enter_idle(struct cpuidle_device *dev, - struct cpuidle_driver *drv, - int index) + struct cpuidle_driver *drv, int index) { davinci_save_ddr_power(1, ddr2_pdown); - - index = cpuidle_wrap_enter(dev, drv, index, - arm_cpuidle_simple_enter); - + cpu_do_idle(); davinci_save_ddr_power(0, ddr2_pdown); return index; @@ -66,7 +61,6 @@ static int davinci_enter_idle(struct cpuidle_device *dev, static struct cpuidle_driver davinci_idle_driver = { .name = "cpuidle-davinci", .owner = THIS_MODULE, - .en_core_tk_irqen = 1, .states[0] = ARM_CPUIDLE_WFI_STATE, .states[1] = { .enter = davinci_enter_idle, @@ -81,12 +75,8 @@ static struct cpuidle_driver davinci_idle_driver = { static int __init davinci_cpuidle_probe(struct platform_device *pdev) { - int ret; - struct cpuidle_device *device; struct davinci_cpuidle_config *pdata = pdev->dev.platform_data; - device = &per_cpu(davinci_cpuidle_device, smp_processor_id()); - if (!pdata) { dev_err(&pdev->dev, "cannot get platform data\n"); return -ENOENT; @@ -96,20 +86,7 @@ static int __init davinci_cpuidle_probe(struct platform_device *pdev) ddr2_pdown = pdata->ddr2_pdown; - ret = cpuidle_register_driver(&davinci_idle_driver); - if (ret) { - dev_err(&pdev->dev, "failed to register driver\n"); - return ret; - } - - ret = cpuidle_register_device(device); - if (ret) { - dev_err(&pdev->dev, "failed to register device\n"); - cpuidle_unregister_driver(&davinci_idle_driver); - return ret; - } - - return 0; + return cpuidle_register(&davinci_idle_driver, NULL); } static struct platform_driver davinci_cpuidle_driver = { diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c index 678a54a64dae..abbaf0270be6 100644 --- a/arch/arm/mach-davinci/da830.c +++ b/arch/arm/mach-davinci/da830.c @@ -394,7 +394,7 @@ static struct clk_lookup da830_clks[] = { CLK(NULL, "tpcc", &tpcc_clk), CLK(NULL, "tptc0", &tptc0_clk), CLK(NULL, "tptc1", &tptc1_clk), - CLK("davinci_mmc.0", NULL, &mmcsd_clk), + CLK("da830-mmc.0", NULL, &mmcsd_clk), CLK(NULL, "uart0", &uart0_clk), CLK(NULL, "uart1", &uart1_clk), CLK(NULL, "uart2", &uart2_clk), diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index 0c4a26ddebba..4d6933848abf 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -383,6 +383,49 @@ static struct clk dsp_clk = { .flags = PSC_LRST | PSC_FORCE, }; +static struct clk ehrpwm_clk = { + .name = "ehrpwm", + .parent = &pll0_sysclk2, + .lpsc = DA8XX_LPSC1_PWM, + .gpsc = 1, + .flags = DA850_CLK_ASYNC3, +}; + +#define DA8XX_EHRPWM_TBCLKSYNC BIT(12) + +static void ehrpwm_tblck_enable(struct clk *clk) +{ + u32 val; + + val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP1_REG)); + val |= DA8XX_EHRPWM_TBCLKSYNC; + writel(val, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP1_REG)); +} + +static void ehrpwm_tblck_disable(struct clk *clk) +{ + u32 val; + + val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP1_REG)); + val &= ~DA8XX_EHRPWM_TBCLKSYNC; + writel(val, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP1_REG)); +} + +static struct clk ehrpwm_tbclk = { + .name = "ehrpwm_tbclk", + .parent = &ehrpwm_clk, + .clk_enable = ehrpwm_tblck_enable, + .clk_disable = ehrpwm_tblck_disable, +}; + +static struct clk ecap_clk = { + .name = "ecap", + .parent = &pll0_sysclk2, + .lpsc = DA8XX_LPSC1_ECAP, + .gpsc = 1, + .flags = DA850_CLK_ASYNC3, +}; + static struct clk_lookup da850_clks[] = { CLK(NULL, "ref", &ref_clk), CLK(NULL, "pll0", &pll0_clk), @@ -420,8 +463,8 @@ static struct clk_lookup da850_clks[] = { CLK("davinci_emac.1", NULL, &emac_clk), CLK("davinci-mcasp.0", NULL, &mcasp_clk), CLK("da8xx_lcdc.0", "fck", &lcdc_clk), - CLK("davinci_mmc.0", NULL, &mmcsd0_clk), - CLK("davinci_mmc.1", NULL, &mmcsd1_clk), + CLK("da830-mmc.0", NULL, &mmcsd0_clk), + CLK("da830-mmc.1", NULL, &mmcsd1_clk), CLK(NULL, "aemif", &aemif_clk), CLK(NULL, "usb11", &usb11_clk), CLK(NULL, "usb20", &usb20_clk), @@ -430,6 +473,9 @@ static struct clk_lookup da850_clks[] = { CLK("vpif", NULL, &vpif_clk), CLK("ahci", NULL, &sata_clk), CLK("davinci-rproc.0", NULL, &dsp_clk), + CLK("ehrpwm", "fck", &ehrpwm_clk), + CLK("ehrpwm", "tbclk", &ehrpwm_tbclk), + CLK("ecap", "fck", &ecap_clk), CLK(NULL, NULL, NULL), }; diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c index 6b7a0a27fbd1..961aea8bbad5 100644 --- a/arch/arm/mach-davinci/da8xx-dt.c +++ b/arch/arm/mach-davinci/da8xx-dt.c @@ -20,7 +20,7 @@ #define DA8XX_NUM_UARTS 3 -void __init da8xx_uart_clk_enable(void) +static void __init da8xx_uart_clk_enable(void) { int i; for (i = 0; i < DA8XX_NUM_UARTS; i++) @@ -37,9 +37,16 @@ static void __init da8xx_init_irq(void) of_irq_init(da8xx_irq_match); } -struct of_dev_auxdata da850_auxdata_lookup[] __initdata = { +static struct of_dev_auxdata da850_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("ti,davinci-i2c", 0x01c22000, "i2c_davinci.1", NULL), OF_DEV_AUXDATA("ti,davinci-wdt", 0x01c21000, "watchdog", NULL), + OF_DEV_AUXDATA("ti,da830-mmc", 0x01c40000, "da830-mmc.0", NULL), + OF_DEV_AUXDATA("ti,da850-ehrpwm", 0x01f00000, "ehrpwm", NULL), + OF_DEV_AUXDATA("ti,da850-ehrpwm", 0x01f02000, "ehrpwm", NULL), + OF_DEV_AUXDATA("ti,da850-ecap", 0x01f06000, "ecap", NULL), + OF_DEV_AUXDATA("ti,da850-ecap", 0x01f07000, "ecap", NULL), + OF_DEV_AUXDATA("ti,da850-ecap", 0x01f08000, "ecap", NULL), + OF_DEV_AUXDATA("ti,da830-spi", 0x01f0e000, "spi_davinci.1", NULL), {} }; diff --git a/arch/arm/mach-davinci/davinci.h b/arch/arm/mach-davinci/davinci.h index 12d544befcfa..1ab3df423dac 100644 --- a/arch/arm/mach-davinci/davinci.h +++ b/arch/arm/mach-davinci/davinci.h @@ -36,12 +36,19 @@ #include <media/davinci/vpbe_osd.h> #define DAVINCI_SYSTEM_MODULE_BASE 0x01c40000 +#define SYSMOD_VDAC_CONFIG 0x2c #define SYSMOD_VIDCLKCTL 0x38 #define SYSMOD_VPSS_CLKCTL 0x44 #define SYSMOD_VDD3P3VPWDN 0x48 #define SYSMOD_VSCLKDIS 0x6c #define SYSMOD_PUPDCTL1 0x7c +/* VPSS CLKCTL bit definitions */ +#define VPSS_MUXSEL_EXTCLK_ENABLE BIT(1) +#define VPSS_VENCCLKEN_ENABLE BIT(3) +#define VPSS_DACCLKEN_ENABLE BIT(4) +#define VPSS_PLLC2SYSCLK5_ENABLE BIT(5) + extern void __iomem *davinci_sysmod_base; #define DAVINCI_SYSMOD_VIRT(x) (davinci_sysmod_base + (x)) void davinci_map_sysmod(void); @@ -74,7 +81,7 @@ void __init dm355_init(void); void dm355_init_spi0(unsigned chipselect_mask, const struct spi_board_info *info, unsigned len); void __init dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata); -void dm355_set_vpfe_config(struct vpfe_config *cfg); +int dm355_init_video(struct vpfe_config *, struct vpbe_config *); /* DM365 function declarations */ void __init dm365_init(void); @@ -84,7 +91,7 @@ void __init dm365_init_ks(struct davinci_ks_platform_data *pdata); void __init dm365_init_rtc(void); void dm365_init_spi0(unsigned chipselect_mask, const struct spi_board_info *info, unsigned len); -void dm365_set_vpfe_config(struct vpfe_config *cfg); +int dm365_init_video(struct vpfe_config *, struct vpbe_config *); /* DM644x function declarations */ void __init dm644x_init(void); diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index fc50243b1481..bf572525175d 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -12,7 +12,7 @@ */ #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/dma-mapping.h> +#include <linux/dma-contiguous.h> #include <linux/serial_8250.h> #include <linux/ahci_platform.h> #include <linux/clk.h> @@ -664,7 +664,7 @@ static struct resource da8xx_mmcsd0_resources[] = { }; static struct platform_device da8xx_mmcsd0_device = { - .name = "davinci_mmc", + .name = "da830-mmc", .id = 0, .num_resources = ARRAY_SIZE(da8xx_mmcsd0_resources), .resource = da8xx_mmcsd0_resources, @@ -701,7 +701,7 @@ static struct resource da850_mmcsd1_resources[] = { }; static struct platform_device da850_mmcsd1_device = { - .name = "davinci_mmc", + .name = "da830-mmc", .id = 1, .num_resources = ARRAY_SIZE(da850_mmcsd1_resources), .resource = da850_mmcsd1_resources, @@ -714,6 +714,92 @@ int __init da850_register_mmcsd1(struct davinci_mmc_config *config) } #endif +static struct resource da8xx_rproc_resources[] = { + { /* DSP boot address */ + .start = DA8XX_SYSCFG0_BASE + DA8XX_HOST1CFG_REG, + .end = DA8XX_SYSCFG0_BASE + DA8XX_HOST1CFG_REG + 3, + .flags = IORESOURCE_MEM, + }, + { /* DSP interrupt registers */ + .start = DA8XX_SYSCFG0_BASE + DA8XX_CHIPSIG_REG, + .end = DA8XX_SYSCFG0_BASE + DA8XX_CHIPSIG_REG + 7, + .flags = IORESOURCE_MEM, + }, + { /* dsp irq */ + .start = IRQ_DA8XX_CHIPINT0, + .end = IRQ_DA8XX_CHIPINT0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device da8xx_dsp = { + .name = "davinci-rproc", + .dev = { + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = ARRAY_SIZE(da8xx_rproc_resources), + .resource = da8xx_rproc_resources, +}; + +#if IS_ENABLED(CONFIG_DA8XX_REMOTEPROC) + +static phys_addr_t rproc_base __initdata; +static unsigned long rproc_size __initdata; + +static int __init early_rproc_mem(char *p) +{ + char *endp; + + if (p == NULL) + return 0; + + rproc_size = memparse(p, &endp); + if (*endp == '@') + rproc_base = memparse(endp + 1, NULL); + + return 0; +} +early_param("rproc_mem", early_rproc_mem); + +void __init da8xx_rproc_reserve_cma(void) +{ + int ret; + + if (!rproc_base || !rproc_size) { + pr_err("%s: 'rproc_mem=nn@address' badly specified\n" + " 'nn' and 'address' must both be non-zero\n", + __func__); + + return; + } + + pr_info("%s: reserving 0x%lx @ 0x%lx...\n", + __func__, rproc_size, (unsigned long)rproc_base); + + ret = dma_declare_contiguous(&da8xx_dsp.dev, rproc_size, rproc_base, 0); + if (ret) + pr_err("%s: dma_declare_contiguous failed %d\n", __func__, ret); +} + +#else + +void __init da8xx_rproc_reserve_cma(void) +{ +} + +#endif + +int __init da8xx_register_rproc(void) +{ + int ret; + + ret = platform_device_register(&da8xx_dsp); + if (ret) + pr_err("%s: can't register DSP device: %d\n", __func__, ret); + + return ret; +}; + static struct resource da8xx_rtc_resources[] = { { .start = DA8XX_RTC_BASE, diff --git a/arch/arm/mach-davinci/devices-tnetv107x.c b/arch/arm/mach-davinci/devices-tnetv107x.c index 773ab07a71a0..cfb194df18ed 100644 --- a/arch/arm/mach-davinci/devices-tnetv107x.c +++ b/arch/arm/mach-davinci/devices-tnetv107x.c @@ -218,7 +218,7 @@ static u64 mmc1_dma_mask = DMA_BIT_MASK(32); static struct platform_device mmc_devices[2] = { { - .name = "davinci_mmc", + .name = "dm6441-mmc", .id = 0, .dev = { .dma_mask = &mmc0_dma_mask, @@ -228,7 +228,7 @@ static struct platform_device mmc_devices[2] = { .resource = mmc0_resources }, { - .name = "davinci_mmc", + .name = "dm6441-mmc", .id = 1, .dev = { .dma_mask = &mmc1_dma_mask, diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c index 4c48a36ee567..a7068a3aa9d3 100644 --- a/arch/arm/mach-davinci/devices.c +++ b/arch/arm/mach-davinci/devices.c @@ -119,7 +119,7 @@ void __init davinci_init_ide(void) platform_device_register(&ide_device); } -#if defined(CONFIG_MMC_DAVINCI) || defined(CONFIG_MMC_DAVINCI_MODULE) +#if IS_ENABLED(CONFIG_MMC_DAVINCI) static u64 mmcsd0_dma_mask = DMA_BIT_MASK(32); @@ -150,7 +150,7 @@ static struct resource mmcsd0_resources[] = { }; static struct platform_device davinci_mmcsd0_device = { - .name = "davinci_mmc", + .name = "dm6441-mmc", .id = 0, .dev = { .dma_mask = &mmcsd0_dma_mask, @@ -187,7 +187,7 @@ static struct resource mmcsd1_resources[] = { }; static struct platform_device davinci_mmcsd1_device = { - .name = "davinci_mmc", + .name = "dm6441-mmc", .id = 1, .dev = { .dma_mask = &mmcsd1_dma_mask, @@ -235,6 +235,7 @@ void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config) mmcsd1_resources[0].end = DM365_MMCSD1_BASE + SZ_4K - 1; mmcsd1_resources[2].start = IRQ_DM365_SDIOINT1; + davinci_mmcsd1_device.name = "da830-mmc"; } else break; @@ -256,6 +257,7 @@ void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config) mmcsd0_resources[0].end = DM365_MMCSD0_BASE + SZ_4K - 1; mmcsd0_resources[2].start = IRQ_DM365_SDIOINT0; + davinci_mmcsd0_device.name = "da830-mmc"; } else if (cpu_is_davinci_dm644x()) { /* REVISIT: should this be in board-init code? */ /* Power-on 3.3V IO cells */ diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index b49c3b77d55e..a11034a358f1 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -35,6 +35,8 @@ #include "asp.h" #define DM355_UART2_BASE (IO_PHYS + 0x206000) +#define DM355_OSD_BASE (IO_PHYS + 0x70200) +#define DM355_VENC_BASE (IO_PHYS + 0x70400) /* * Device specific clocks @@ -345,8 +347,8 @@ static struct clk_lookup dm355_clks[] = { CLK(NULL, "pll1_aux", &pll1_aux_clk), CLK(NULL, "pll1_sysclkbp", &pll1_sysclkbp), CLK(NULL, "vpss_dac", &vpss_dac_clk), - CLK(NULL, "vpss_master", &vpss_master_clk), - CLK(NULL, "vpss_slave", &vpss_slave_clk), + CLK("vpss", "master", &vpss_master_clk), + CLK("vpss", "slave", &vpss_slave_clk), CLK(NULL, "clkout1", &clkout1_clk), CLK(NULL, "clkout2", &clkout2_clk), CLK(NULL, "pll2", &pll2_clk), @@ -361,8 +363,8 @@ static struct clk_lookup dm355_clks[] = { CLK("i2c_davinci.1", NULL, &i2c_clk), CLK("davinci-mcbsp.0", NULL, &asp0_clk), CLK("davinci-mcbsp.1", NULL, &asp1_clk), - CLK("davinci_mmc.0", NULL, &mmcsd0_clk), - CLK("davinci_mmc.1", NULL, &mmcsd1_clk), + CLK("dm6441-mmc.0", NULL, &mmcsd0_clk), + CLK("dm6441-mmc.1", NULL, &mmcsd1_clk), CLK("spi_davinci.0", NULL, &spi0_clk), CLK("spi_davinci.1", NULL, &spi1_clk), CLK("spi_davinci.2", NULL, &spi2_clk), @@ -744,11 +746,146 @@ static struct platform_device vpfe_capture_dev = { }, }; -void dm355_set_vpfe_config(struct vpfe_config *cfg) +static struct resource dm355_osd_resources[] = { + { + .start = DM355_OSD_BASE, + .end = DM355_OSD_BASE + 0x17f, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device dm355_osd_dev = { + .name = DM355_VPBE_OSD_SUBDEV_NAME, + .id = -1, + .num_resources = ARRAY_SIZE(dm355_osd_resources), + .resource = dm355_osd_resources, + .dev = { + .dma_mask = &vpfe_capture_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +static struct resource dm355_venc_resources[] = { + { + .start = IRQ_VENCINT, + .end = IRQ_VENCINT, + .flags = IORESOURCE_IRQ, + }, + /* venc registers io space */ + { + .start = DM355_VENC_BASE, + .end = DM355_VENC_BASE + 0x17f, + .flags = IORESOURCE_MEM, + }, + /* VDAC config register io space */ + { + .start = DAVINCI_SYSTEM_MODULE_BASE + SYSMOD_VDAC_CONFIG, + .end = DAVINCI_SYSTEM_MODULE_BASE + SYSMOD_VDAC_CONFIG + 3, + .flags = IORESOURCE_MEM, + }, +}; + +static struct resource dm355_v4l2_disp_resources[] = { + { + .start = IRQ_VENCINT, + .end = IRQ_VENCINT, + .flags = IORESOURCE_IRQ, + }, + /* venc registers io space */ + { + .start = DM355_VENC_BASE, + .end = DM355_VENC_BASE + 0x17f, + .flags = IORESOURCE_MEM, + }, +}; + +static int dm355_vpbe_setup_pinmux(enum v4l2_mbus_pixelcode if_type, + int field) +{ + switch (if_type) { + case V4L2_MBUS_FMT_SGRBG8_1X8: + davinci_cfg_reg(DM355_VOUT_FIELD_G70); + break; + case V4L2_MBUS_FMT_YUYV10_1X20: + if (field) + davinci_cfg_reg(DM355_VOUT_FIELD); + else + davinci_cfg_reg(DM355_VOUT_FIELD_G70); + break; + default: + return -EINVAL; + } + + davinci_cfg_reg(DM355_VOUT_COUTL_EN); + davinci_cfg_reg(DM355_VOUT_COUTH_EN); + + return 0; +} + +static int dm355_venc_setup_clock(enum vpbe_enc_timings_type type, + unsigned int pclock) { - vpfe_capture_dev.dev.platform_data = cfg; + void __iomem *vpss_clk_ctrl_reg; + + vpss_clk_ctrl_reg = DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL); + + switch (type) { + case VPBE_ENC_STD: + writel(VPSS_DACCLKEN_ENABLE | VPSS_VENCCLKEN_ENABLE, + vpss_clk_ctrl_reg); + break; + case VPBE_ENC_DV_TIMINGS: + if (pclock > 27000000) + /* + * For HD, use external clock source since we cannot + * support HD mode with internal clocks. + */ + writel(VPSS_MUXSEL_EXTCLK_ENABLE, vpss_clk_ctrl_reg); + break; + default: + return -EINVAL; + } + + return 0; } +static struct platform_device dm355_vpbe_display = { + .name = "vpbe-v4l2", + .id = -1, + .num_resources = ARRAY_SIZE(dm355_v4l2_disp_resources), + .resource = dm355_v4l2_disp_resources, + .dev = { + .dma_mask = &vpfe_capture_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +struct venc_platform_data dm355_venc_pdata = { + .setup_pinmux = dm355_vpbe_setup_pinmux, + .setup_clock = dm355_venc_setup_clock, +}; + +static struct platform_device dm355_venc_dev = { + .name = DM355_VPBE_VENC_SUBDEV_NAME, + .id = -1, + .num_resources = ARRAY_SIZE(dm355_venc_resources), + .resource = dm355_venc_resources, + .dev = { + .dma_mask = &vpfe_capture_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = (void *)&dm355_venc_pdata, + }, +}; + +static struct platform_device dm355_vpbe_dev = { + .name = "vpbe_controller", + .id = -1, + .dev = { + .dma_mask = &vpfe_capture_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + /*----------------------------------------------------------------------*/ static struct map_desc dm355_io_desc[] = { @@ -868,19 +1005,36 @@ void __init dm355_init(void) davinci_map_sysmod(); } +int __init dm355_init_video(struct vpfe_config *vpfe_cfg, + struct vpbe_config *vpbe_cfg) +{ + if (vpfe_cfg || vpbe_cfg) + platform_device_register(&dm355_vpss_device); + + if (vpfe_cfg) { + vpfe_capture_dev.dev.platform_data = vpfe_cfg; + platform_device_register(&dm355_ccdc_dev); + platform_device_register(&vpfe_capture_dev); + } + + if (vpbe_cfg) { + dm355_vpbe_dev.dev.platform_data = vpbe_cfg; + platform_device_register(&dm355_osd_dev); + platform_device_register(&dm355_venc_dev); + platform_device_register(&dm355_vpbe_dev); + platform_device_register(&dm355_vpbe_display); + } + + return 0; +} + static int __init dm355_init_devices(void) { if (!cpu_is_davinci_dm355()) return 0; - /* Add ccdc clock aliases */ - clk_add_alias("master", dm355_ccdc_dev.name, "vpss_master", NULL); - clk_add_alias("slave", dm355_ccdc_dev.name, "vpss_master", NULL); davinci_cfg_reg(DM355_INT_EDMA_CC); platform_device_register(&dm355_edma_device); - platform_device_register(&dm355_vpss_device); - platform_device_register(&dm355_ccdc_dev); - platform_device_register(&vpfe_capture_dev); return 0; } diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index 6c3980540be0..40fa4fee9331 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -39,16 +39,13 @@ #include "asp.h" #define DM365_REF_FREQ 24000000 /* 24 MHz on the DM365 EVM */ - -/* Base of key scan register bank */ -#define DM365_KEYSCAN_BASE 0x01c69400 - #define DM365_RTC_BASE 0x01c69000 - +#define DM365_KEYSCAN_BASE 0x01c69400 +#define DM365_OSD_BASE 0x01c71c00 +#define DM365_VENC_BASE 0x01c71e00 #define DAVINCI_DM365_VC_BASE 0x01d0c000 #define DAVINCI_DMA_VC_TX 2 #define DAVINCI_DMA_VC_RX 3 - #define DM365_EMAC_BASE 0x01d07000 #define DM365_EMAC_MDIO_BASE (DM365_EMAC_BASE + 0x4000) #define DM365_EMAC_CNTRL_OFFSET 0x0000 @@ -257,6 +254,12 @@ static struct clk vpss_master_clk = { .flags = CLK_PSC, }; +static struct clk vpss_slave_clk = { + .name = "vpss_slave", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_VPSSSLV, +}; + static struct clk arm_clk = { .name = "arm_clk", .parent = &pll2_sysclk2, @@ -449,13 +452,14 @@ static struct clk_lookup dm365_clks[] = { CLK(NULL, "pll2_sysclk8", &pll2_sysclk8), CLK(NULL, "pll2_sysclk9", &pll2_sysclk9), CLK(NULL, "vpss_dac", &vpss_dac_clk), - CLK(NULL, "vpss_master", &vpss_master_clk), + CLK("vpss", "master", &vpss_master_clk), + CLK("vpss", "slave", &vpss_slave_clk), CLK(NULL, "arm", &arm_clk), CLK(NULL, "uart0", &uart0_clk), CLK(NULL, "uart1", &uart1_clk), CLK("i2c_davinci.1", NULL, &i2c_clk), - CLK("davinci_mmc.0", NULL, &mmcsd0_clk), - CLK("davinci_mmc.1", NULL, &mmcsd1_clk), + CLK("da830-mmc.0", NULL, &mmcsd0_clk), + CLK("da830-mmc.1", NULL, &mmcsd1_clk), CLK("spi_davinci.0", NULL, &spi0_clk), CLK("spi_davinci.1", NULL, &spi1_clk), CLK("spi_davinci.2", NULL, &spi2_clk), @@ -1226,6 +1230,173 @@ static struct platform_device dm365_isif_dev = { }, }; +static struct resource dm365_osd_resources[] = { + { + .start = DM365_OSD_BASE, + .end = DM365_OSD_BASE + 0xff, + .flags = IORESOURCE_MEM, + }, +}; + +static u64 dm365_video_dma_mask = DMA_BIT_MASK(32); + +static struct platform_device dm365_osd_dev = { + .name = DM365_VPBE_OSD_SUBDEV_NAME, + .id = -1, + .num_resources = ARRAY_SIZE(dm365_osd_resources), + .resource = dm365_osd_resources, + .dev = { + .dma_mask = &dm365_video_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +static struct resource dm365_venc_resources[] = { + { + .start = IRQ_VENCINT, + .end = IRQ_VENCINT, + .flags = IORESOURCE_IRQ, + }, + /* venc registers io space */ + { + .start = DM365_VENC_BASE, + .end = DM365_VENC_BASE + 0x177, + .flags = IORESOURCE_MEM, + }, + /* vdaccfg registers io space */ + { + .start = DAVINCI_SYSTEM_MODULE_BASE + SYSMOD_VDAC_CONFIG, + .end = DAVINCI_SYSTEM_MODULE_BASE + SYSMOD_VDAC_CONFIG + 3, + .flags = IORESOURCE_MEM, + }, +}; + +static struct resource dm365_v4l2_disp_resources[] = { + { + .start = IRQ_VENCINT, + .end = IRQ_VENCINT, + .flags = IORESOURCE_IRQ, + }, + /* venc registers io space */ + { + .start = DM365_VENC_BASE, + .end = DM365_VENC_BASE + 0x177, + .flags = IORESOURCE_MEM, + }, +}; + +static int dm365_vpbe_setup_pinmux(enum v4l2_mbus_pixelcode if_type, + int field) +{ + switch (if_type) { + case V4L2_MBUS_FMT_SGRBG8_1X8: + davinci_cfg_reg(DM365_VOUT_FIELD_G81); + davinci_cfg_reg(DM365_VOUT_COUTL_EN); + davinci_cfg_reg(DM365_VOUT_COUTH_EN); + break; + case V4L2_MBUS_FMT_YUYV10_1X20: + if (field) + davinci_cfg_reg(DM365_VOUT_FIELD); + else + davinci_cfg_reg(DM365_VOUT_FIELD_G81); + davinci_cfg_reg(DM365_VOUT_COUTL_EN); + davinci_cfg_reg(DM365_VOUT_COUTH_EN); + break; + default: + return -EINVAL; + } + + return 0; +} + +static int dm365_venc_setup_clock(enum vpbe_enc_timings_type type, + unsigned int pclock) +{ + void __iomem *vpss_clkctl_reg; + u32 val; + + vpss_clkctl_reg = DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL); + + switch (type) { + case VPBE_ENC_STD: + val = VPSS_VENCCLKEN_ENABLE | VPSS_DACCLKEN_ENABLE; + break; + case VPBE_ENC_DV_TIMINGS: + if (pclock <= 27000000) { + val = VPSS_VENCCLKEN_ENABLE | VPSS_DACCLKEN_ENABLE; + } else { + /* set sysclk4 to output 74.25 MHz from pll1 */ + val = VPSS_PLLC2SYSCLK5_ENABLE | VPSS_DACCLKEN_ENABLE | + VPSS_VENCCLKEN_ENABLE; + } + break; + default: + return -EINVAL; + } + writel(val, vpss_clkctl_reg); + + return 0; +} + +static struct platform_device dm365_vpbe_display = { + .name = "vpbe-v4l2", + .id = -1, + .num_resources = ARRAY_SIZE(dm365_v4l2_disp_resources), + .resource = dm365_v4l2_disp_resources, + .dev = { + .dma_mask = &dm365_video_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +struct venc_platform_data dm365_venc_pdata = { + .setup_pinmux = dm365_vpbe_setup_pinmux, + .setup_clock = dm365_venc_setup_clock, +}; + +static struct platform_device dm365_venc_dev = { + .name = DM365_VPBE_VENC_SUBDEV_NAME, + .id = -1, + .num_resources = ARRAY_SIZE(dm365_venc_resources), + .resource = dm365_venc_resources, + .dev = { + .dma_mask = &dm365_video_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = (void *)&dm365_venc_pdata, + }, +}; + +static struct platform_device dm365_vpbe_dev = { + .name = "vpbe_controller", + .id = -1, + .dev = { + .dma_mask = &dm365_video_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +int __init dm365_init_video(struct vpfe_config *vpfe_cfg, + struct vpbe_config *vpbe_cfg) +{ + if (vpfe_cfg || vpbe_cfg) + platform_device_register(&dm365_vpss_device); + + if (vpfe_cfg) { + vpfe_capture_dev.dev.platform_data = vpfe_cfg; + platform_device_register(&dm365_isif_dev); + platform_device_register(&vpfe_capture_dev); + } + if (vpbe_cfg) { + dm365_vpbe_dev.dev.platform_data = vpbe_cfg; + platform_device_register(&dm365_osd_dev); + platform_device_register(&dm365_venc_dev); + platform_device_register(&dm365_vpbe_dev); + platform_device_register(&dm365_vpbe_display); + } + + return 0; +} + static int __init dm365_init_devices(void) { if (!cpu_is_davinci_dm365()) @@ -1239,16 +1410,6 @@ static int __init dm365_init_devices(void) clk_add_alias(NULL, dev_name(&dm365_mdio_device.dev), NULL, &dm365_emac_device.dev); - /* Add isif clock alias */ - clk_add_alias("master", dm365_isif_dev.name, "vpss_master", NULL); - platform_device_register(&dm365_vpss_device); - platform_device_register(&dm365_isif_dev); - platform_device_register(&vpfe_capture_dev); return 0; } postcore_initcall(dm365_init_devices); - -void dm365_set_vpfe_config(struct vpfe_config *cfg) -{ - vpfe_capture_dev.dev.platform_data = cfg; -} diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index db1dd92e00af..4d37d3e2a193 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -300,8 +300,8 @@ static struct clk_lookup dm644x_clks[] = { CLK(NULL, "dsp", &dsp_clk), CLK(NULL, "arm", &arm_clk), CLK(NULL, "vicp", &vicp_clk), - CLK(NULL, "vpss_master", &vpss_master_clk), - CLK(NULL, "vpss_slave", &vpss_slave_clk), + CLK("vpss", "master", &vpss_master_clk), + CLK("vpss", "slave", &vpss_slave_clk), CLK(NULL, "arm", &arm_clk), CLK(NULL, "uart0", &uart0_clk), CLK(NULL, "uart1", &uart1_clk), @@ -310,7 +310,7 @@ static struct clk_lookup dm644x_clks[] = { CLK("i2c_davinci.1", NULL, &i2c_clk), CLK("palm_bk3710", NULL, &ide_clk), CLK("davinci-mcbsp", NULL, &asp_clk), - CLK("davinci_mmc.0", NULL, &mmcsd_clk), + CLK("dm6441-mmc.0", NULL, &mmcsd_clk), CLK(NULL, "spi", &spi_clk), CLK(NULL, "gpio", &gpio_clk), CLK(NULL, "usb", &usb_clk), @@ -706,7 +706,7 @@ static int dm644x_venc_setup_clock(enum vpbe_enc_timings_type type, v |= DM644X_VPSS_DACCLKEN; writel(v, DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL)); break; - case VPBE_ENC_CUSTOM_TIMINGS: + case VPBE_ENC_DV_TIMINGS: if (pclock <= 27000000) { v |= DM644X_VPSS_DACCLKEN; writel(v, DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL)); @@ -901,11 +901,6 @@ int __init dm644x_init_video(struct vpfe_config *vpfe_cfg, dm644x_vpfe_dev.dev.platform_data = vpfe_cfg; platform_device_register(&dm644x_ccdc_dev); platform_device_register(&dm644x_vpfe_dev); - /* Add ccdc clock aliases */ - clk_add_alias("master", dm644x_ccdc_dev.name, - "vpss_master", NULL); - clk_add_alias("slave", dm644x_ccdc_dev.name, - "vpss_slave", NULL); } if (vpbe_cfg) { diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index de439b7b9af1..2e1c9eae0a58 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -54,7 +54,10 @@ extern unsigned int da850_max_speed; #define DA8XX_SYSCFG0_BASE (IO_PHYS + 0x14000) #define DA8XX_SYSCFG0_VIRT(x) (da8xx_syscfg0_base + (x)) #define DA8XX_JTAG_ID_REG 0x18 +#define DA8XX_HOST1CFG_REG 0x44 +#define DA8XX_CHIPSIG_REG 0x174 #define DA8XX_CFGCHIP0_REG 0x17c +#define DA8XX_CFGCHIP1_REG 0x180 #define DA8XX_CFGCHIP2_REG 0x184 #define DA8XX_CFGCHIP3_REG 0x188 @@ -104,6 +107,8 @@ int __init da850_register_vpif_display int __init da850_register_vpif_capture (struct vpif_capture_config *capture_config); void da8xx_restart(char mode, const char *cmd); +void da8xx_rproc_reserve_cma(void); +int da8xx_register_rproc(void); extern struct platform_device da8xx_serial_device; extern struct emac_platform_data da8xx_emac_pdata; diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S index 34290d14754b..b18b8ebc6508 100644 --- a/arch/arm/mach-davinci/include/mach/debug-macro.S +++ b/arch/arm/mach-davinci/include/mach/debug-macro.S @@ -24,8 +24,6 @@ #if defined(CONFIG_DEBUG_DAVINCI_DMx_UART0) #define UART_BASE DAVINCI_UART0_BASE -#elif defined(CONFIG_DEBUG_DAVINCI_DA8XX_UART0) -#define UART_BASE DA8XX_UART0_BASE #elif defined(CONFIG_DEBUG_DAVINCI_DA8XX_UART1) #define UART_BASE DA8XX_UART1_BASE #elif defined(CONFIG_DEBUG_DAVINCI_DA8XX_UART2) diff --git a/arch/arm/mach-davinci/pm.c b/arch/arm/mach-davinci/pm.c index eb8360b33aa9..a508fe587af7 100644 --- a/arch/arm/mach-davinci/pm.c +++ b/arch/arm/mach-davinci/pm.c @@ -19,6 +19,7 @@ #include <asm/delay.h> #include <asm/io.h> +#include <mach/common.h> #include <mach/da8xx.h> #include <mach/sram.h> #include <mach/pm.h> diff --git a/arch/arm/mach-davinci/pm_domain.c b/arch/arm/mach-davinci/pm_domain.c index c90250e3bef8..6b98413cebd6 100644 --- a/arch/arm/mach-davinci/pm_domain.c +++ b/arch/arm/mach-davinci/pm_domain.c @@ -53,7 +53,7 @@ static struct dev_pm_domain davinci_pm_domain = { static struct pm_clk_notifier_block platform_bus_notifier = { .pm_domain = &davinci_pm_domain, - .con_ids = { "fck", NULL, }, + .con_ids = { "fck", "master", "slave", NULL }, }; static int __init davinci_pm_runtime_init(void) diff --git a/arch/arm/mach-davinci/sram.c b/arch/arm/mach-davinci/sram.c index c5f7ee5cc80a..f18928b073f5 100644 --- a/arch/arm/mach-davinci/sram.c +++ b/arch/arm/mach-davinci/sram.c @@ -62,7 +62,7 @@ static int __init sram_init(void) phys_addr_t phys = davinci_soc_info.sram_dma; unsigned len = davinci_soc_info.sram_len; int status = 0; - void *addr; + void __iomem *addr; if (len) { len = min_t(unsigned, len, SRAM_SIZE); @@ -75,7 +75,7 @@ static int __init sram_init(void) addr = ioremap(phys, len); if (!addr) return -ENOMEM; - status = gen_pool_add_virt(sram_pool, (unsigned)addr, + status = gen_pool_add_virt(sram_pool, (unsigned long) addr, phys, len, -1); if (status < 0) iounmap(addr); diff --git a/arch/arm/mach-davinci/tnetv107x.c b/arch/arm/mach-davinci/tnetv107x.c index dc1a209b9b66..3b2a70d43efa 100644 --- a/arch/arm/mach-davinci/tnetv107x.c +++ b/arch/arm/mach-davinci/tnetv107x.c @@ -272,7 +272,7 @@ static struct clk_lookup clks[] = { CLK("tnetv107x-keypad.0", NULL, &clk_keypad), CLK(NULL, "clk_gpio", &clk_gpio), CLK(NULL, "clk_mdio", &clk_mdio), - CLK("davinci_mmc.0", NULL, &clk_sdio0), + CLK("dm6441-mmc.0", NULL, &clk_sdio0), CLK(NULL, "uart0", &clk_uart0), CLK(NULL, "uart1", &clk_uart1), CLK(NULL, "timer0", &clk_timer0), @@ -292,7 +292,7 @@ static struct clk_lookup clks[] = { CLK(NULL, "clk_system", &clk_system), CLK(NULL, "clk_imcop", &clk_imcop), CLK(NULL, "clk_spare", &clk_spare), - CLK("davinci_mmc.1", NULL, &clk_sdio1), + CLK("dm6441-mmc.1", NULL, &clk_sdio1), CLK(NULL, "clk_ddr2_vrst", &clk_ddr2_vrst), CLK(NULL, "clk_ddr2_vctl_rst", &clk_ddr2_vctl_rst), CLK(NULL, NULL, NULL), diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c index 34509ffba221..b0a6b522575f 100644 --- a/arch/arm/mach-davinci/usb.c +++ b/arch/arm/mach-davinci/usb.c @@ -10,6 +10,7 @@ #include <mach/common.h> #include <mach/irqs.h> #include <mach/cputype.h> +#include <mach/da8xx.h> #include <linux/platform_data/usb-davinci.h> #define DAVINCI_USB_OTG_BASE 0x01c64000 @@ -17,7 +18,7 @@ #define DA8XX_USB0_BASE 0x01e00000 #define DA8XX_USB1_BASE 0x01e25000 -#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +#if IS_ENABLED(CONFIG_USB_MUSB_HDRC) static struct musb_hdrc_eps_bits musb_eps[] = { { "ep1_tx", 8, }, { "ep1_rx", 8, }, diff --git a/arch/arm/mach-dove/Makefile b/arch/arm/mach-dove/Makefile index 3f0a858fb597..4d9d2ffc4535 100644 --- a/arch/arm/mach-dove/Makefile +++ b/arch/arm/mach-dove/Makefile @@ -1,4 +1,4 @@ -obj-y += common.o addr-map.o irq.o +obj-y += common.o irq.o obj-$(CONFIG_DOVE_LEGACY) += mpp.o obj-$(CONFIG_PCI) += pcie.o obj-$(CONFIG_MACH_DOVE_DB) += dove-db-setup.o diff --git a/arch/arm/mach-dove/addr-map.c b/arch/arm/mach-dove/addr-map.c deleted file mode 100644 index 2a06c0163418..000000000000 --- a/arch/arm/mach-dove/addr-map.c +++ /dev/null @@ -1,125 +0,0 @@ -/* - * arch/arm/mach-dove/addr-map.c - * - * Address map functions for Marvell Dove 88AP510 SoC - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/mbus.h> -#include <linux/io.h> -#include <asm/mach/arch.h> -#include <asm/setup.h> -#include <mach/dove.h> -#include <plat/addr-map.h> -#include "common.h" - -/* - * Generic Address Decode Windows bit settings - */ -#define TARGET_DDR 0x0 -#define TARGET_BOOTROM 0x1 -#define TARGET_CESA 0x3 -#define TARGET_PCIE0 0x4 -#define TARGET_PCIE1 0x8 -#define TARGET_SCRATCHPAD 0xd - -#define ATTR_CESA 0x01 -#define ATTR_BOOTROM 0xfd -#define ATTR_DEV_SPI0_ROM 0xfe -#define ATTR_DEV_SPI1_ROM 0xfb -#define ATTR_PCIE_IO 0xe0 -#define ATTR_PCIE_MEM 0xe8 -#define ATTR_SCRATCHPAD 0x0 - -static inline void __iomem *ddr_map_sc(int i) -{ - return (void __iomem *)(DOVE_MC_VIRT_BASE + 0x100 + ((i) << 4)); -} - -/* - * Description of the windows needed by the platform code - */ -static struct __initdata orion_addr_map_cfg addr_map_cfg = { - .num_wins = 8, - .remappable_wins = 4, - .bridge_virt_base = BRIDGE_VIRT_BASE, -}; - -static const struct __initdata orion_addr_map_info addr_map_info[] = { - /* - * Windows for PCIe IO+MEM space. - */ - { 0, DOVE_PCIE0_IO_PHYS_BASE, DOVE_PCIE0_IO_SIZE, - TARGET_PCIE0, ATTR_PCIE_IO, DOVE_PCIE0_IO_BUS_BASE - }, - { 1, DOVE_PCIE1_IO_PHYS_BASE, DOVE_PCIE1_IO_SIZE, - TARGET_PCIE1, ATTR_PCIE_IO, DOVE_PCIE1_IO_BUS_BASE - }, - { 2, DOVE_PCIE0_MEM_PHYS_BASE, DOVE_PCIE0_MEM_SIZE, - TARGET_PCIE0, ATTR_PCIE_MEM, -1 - }, - { 3, DOVE_PCIE1_MEM_PHYS_BASE, DOVE_PCIE1_MEM_SIZE, - TARGET_PCIE1, ATTR_PCIE_MEM, -1 - }, - /* - * Window for CESA engine. - */ - { 4, DOVE_CESA_PHYS_BASE, DOVE_CESA_SIZE, - TARGET_CESA, ATTR_CESA, -1 - }, - /* - * Window to the BootROM for Standby and Sleep Resume - */ - { 5, DOVE_BOOTROM_PHYS_BASE, DOVE_BOOTROM_SIZE, - TARGET_BOOTROM, ATTR_BOOTROM, -1 - }, - /* - * Window to the PMU Scratch Pad space - */ - { 6, DOVE_SCRATCHPAD_PHYS_BASE, DOVE_SCRATCHPAD_SIZE, - TARGET_SCRATCHPAD, ATTR_SCRATCHPAD, -1 - }, - /* End marker */ - { -1, 0, 0, 0, 0, 0 } -}; - -void __init dove_setup_cpu_mbus(void) -{ - int i; - int cs; - - /* - * Disable, clear and configure windows. - */ - orion_config_wins(&addr_map_cfg, addr_map_info); - - /* - * Setup MBUS dram target info. - */ - orion_mbus_dram_info.mbus_dram_target_id = TARGET_DDR; - - for (i = 0, cs = 0; i < 2; i++) { - u32 map = readl(ddr_map_sc(i)); - - /* - * Chip select enabled? - */ - if (map & 1) { - struct mbus_dram_window *w; - - w = &orion_mbus_dram_info.cs[cs++]; - w->cs_index = i; - w->mbus_attr = 0; /* CS address decoding done inside */ - /* the DDR controller, no need to */ - /* provide attributes */ - w->base = map & 0xff800000; - w->size = 0x100000 << (((map & 0x000f0000) >> 16) - 4); - } - } - orion_mbus_dram_info.num_cs = cs; -} diff --git a/arch/arm/mach-dove/board-dt.c b/arch/arm/mach-dove/board-dt.c index fbde1dd67113..0b142803b2e1 100644 --- a/arch/arm/mach-dove/board-dt.c +++ b/arch/arm/mach-dove/board-dt.c @@ -64,7 +64,7 @@ static void __init dove_dt_init(void) #ifdef CONFIG_CACHE_TAUROS2 tauros2_init(0); #endif - dove_setup_cpu_mbus(); + dove_setup_cpu_wins(); /* Setup root of clk tree */ dove_of_clk_init(); diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index c6b3b2bb50e7..e2b5da031f96 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -224,6 +224,9 @@ void __init dove_i2c_init(void) void __init dove_init_early(void) { orion_time_set_base(TIMER_VIRT_BASE); + mvebu_mbus_init("marvell,dove-mbus", + BRIDGE_WINS_BASE, BRIDGE_WINS_SZ, + DOVE_MC_WINS_BASE, DOVE_MC_WINS_SZ); } static int __init dove_find_tclk(void) @@ -326,6 +329,40 @@ void __init dove_sdio1_init(void) platform_device_register(&dove_sdio1); } +void __init dove_setup_cpu_wins(void) +{ + /* + * The PCIe windows will no longer be statically allocated + * here once Dove is migrated to the pci-mvebu driver. + */ + mvebu_mbus_add_window_remap_flags("pcie0.0", + DOVE_PCIE0_IO_PHYS_BASE, + DOVE_PCIE0_IO_SIZE, + DOVE_PCIE0_IO_BUS_BASE, + MVEBU_MBUS_PCI_IO); + mvebu_mbus_add_window_remap_flags("pcie1.0", + DOVE_PCIE1_IO_PHYS_BASE, + DOVE_PCIE1_IO_SIZE, + DOVE_PCIE1_IO_BUS_BASE, + MVEBU_MBUS_PCI_IO); + mvebu_mbus_add_window_remap_flags("pcie0.0", + DOVE_PCIE0_MEM_PHYS_BASE, + DOVE_PCIE0_MEM_SIZE, + MVEBU_MBUS_NO_REMAP, + MVEBU_MBUS_PCI_MEM); + mvebu_mbus_add_window_remap_flags("pcie1.0", + DOVE_PCIE1_MEM_PHYS_BASE, + DOVE_PCIE1_MEM_SIZE, + MVEBU_MBUS_NO_REMAP, + MVEBU_MBUS_PCI_MEM); + mvebu_mbus_add_window("cesa", DOVE_CESA_PHYS_BASE, + DOVE_CESA_SIZE); + mvebu_mbus_add_window("bootrom", DOVE_BOOTROM_PHYS_BASE, + DOVE_BOOTROM_SIZE); + mvebu_mbus_add_window("scratchpad", DOVE_SCRATCHPAD_PHYS_BASE, + DOVE_SCRATCHPAD_SIZE); +} + void __init dove_init(void) { pr_info("Dove 88AP510 SoC, TCLK = %d MHz.\n", @@ -334,7 +371,7 @@ void __init dove_init(void) #ifdef CONFIG_CACHE_TAUROS2 tauros2_init(0); #endif - dove_setup_cpu_mbus(); + dove_setup_cpu_wins(); /* Setup root of clk tree */ dove_clk_init(); diff --git a/arch/arm/mach-dove/common.h b/arch/arm/mach-dove/common.h index ee59fba4c6d1..e86347928b67 100644 --- a/arch/arm/mach-dove/common.h +++ b/arch/arm/mach-dove/common.h @@ -23,7 +23,7 @@ void dove_map_io(void); void dove_init(void); void dove_init_early(void); void dove_init_irq(void); -void dove_setup_cpu_mbus(void); +void dove_setup_cpu_wins(void); void dove_ge00_init(struct mv643xx_eth_platform_data *eth_data); void dove_sata_init(struct mv_sata_platform_data *sata_data); #ifdef CONFIG_PCI diff --git a/arch/arm/mach-dove/include/mach/dove.h b/arch/arm/mach-dove/include/mach/dove.h index 661725e3115a..0c4b35f4ee5b 100644 --- a/arch/arm/mach-dove/include/mach/dove.h +++ b/arch/arm/mach-dove/include/mach/dove.h @@ -77,6 +77,8 @@ /* North-South Bridge */ #define BRIDGE_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x20000) #define BRIDGE_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x20000) +#define BRIDGE_WINS_BASE (BRIDGE_PHYS_BASE) +#define BRIDGE_WINS_SZ (0x80) /* Cryptographic Engine */ #define DOVE_CRYPT_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x30000) @@ -168,6 +170,9 @@ #define DOVE_SSP_CLOCK_ENABLE (1 << 1) #define DOVE_SSP_BPB_CLOCK_SRC_SSP (1 << 11) /* Memory Controller */ +#define DOVE_MC_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE + 0x00000) +#define DOVE_MC_WINS_BASE (DOVE_MC_PHYS_BASE + 0x100) +#define DOVE_MC_WINS_SZ (0x8) #define DOVE_MC_VIRT_BASE (DOVE_NB_REGS_VIRT_BASE + 0x00000) /* LCD Controller */ diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 70f94c87479d..d19edff0ea6e 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -14,6 +14,7 @@ menu "SAMSUNG EXYNOS SoCs Support" config ARCH_EXYNOS4 bool "SAMSUNG EXYNOS4" default y + select HAVE_ARM_SCU if SMP select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 help @@ -21,6 +22,7 @@ config ARCH_EXYNOS4 config ARCH_EXYNOS5 bool "SAMSUNG EXYNOS5" + select HAVE_ARM_SCU if SMP select HAVE_SMP help Samsung EXYNOS5 (Cortex-A15) SoC based systems @@ -61,6 +63,7 @@ config SOC_EXYNOS5250 bool "SAMSUNG EXYNOS5250" default y depends on ARCH_EXYNOS5 + select PM_GENERIC_DOMAINS if PM select S5P_PM if PM select S5P_SLEEP if PM select S5P_DEV_MFC @@ -72,18 +75,27 @@ config SOC_EXYNOS5440 bool "SAMSUNG EXYNOS5440" default y depends on ARCH_EXYNOS5 + select ARCH_HAS_OPP select ARM_ARCH_TIMER select AUTO_ZRELADDR select PINCTRL select PINCTRL_EXYNOS5440 + select PM_OPP help Enable EXYNOS5440 SoC support -config EXYNOS4_MCT - bool +config EXYNOS_ATAGS + bool "ATAGS based boot for EXYNOS (deprecated)" + depends on !ARCH_MULTIPLATFORM + depends on ATAGS default y help - Use MCT (Multi Core Timer) as kernel timers + The EXYNOS platform is moving towards being completely probed + through device tree. This enables support for board files using + the traditional ATAGS boot format. + Note that this option is not available for multiplatform builds. + +if EXYNOS_ATAGS config EXYNOS_DEV_DMA bool @@ -95,11 +107,6 @@ config EXYNOS4_DEV_AHCI help Compile in platform device definitions for AHCI -config EXYNOS_DEV_DRM - bool - help - Compile in platform device definitions for core DRM device - config EXYNOS4_SETUP_FIMD0 bool help @@ -199,7 +206,6 @@ config MACH_SMDKV310 select EXYNOS4_SETUP_SDHCI select EXYNOS4_SETUP_USB_PHY select EXYNOS_DEV_DMA - select EXYNOS_DEV_DRM select EXYNOS_DEV_SYSMMU select S3C24XX_PWM select S3C_DEV_HSMMC @@ -253,9 +259,7 @@ config MACH_UNIVERSAL_C210 select EXYNOS4_SETUP_SDHCI select EXYNOS4_SETUP_USB_PHY select EXYNOS_DEV_DMA - select EXYNOS_DEV_DRM select EXYNOS_DEV_SYSMMU - select HAVE_SCHED_CLOCK select S3C_DEV_HSMMC select S3C_DEV_HSMMC2 select S3C_DEV_HSMMC3 @@ -276,8 +280,8 @@ config MACH_UNIVERSAL_C210 select S5P_DEV_ONENAND select S5P_DEV_TV select S5P_GPIO_INT - select S5P_HRT select S5P_SETUP_MIPIPHY + select SAMSUNG_HRT help Machine support for Samsung Mobile Universal S5PC210 Reference Board. @@ -294,7 +298,6 @@ config MACH_NURI select EXYNOS4_SETUP_SDHCI select EXYNOS4_SETUP_USB_PHY select EXYNOS_DEV_DMA - select EXYNOS_DEV_DRM select S3C_DEV_HSMMC select S3C_DEV_HSMMC2 select S3C_DEV_HSMMC3 @@ -330,7 +333,6 @@ config MACH_ORIGEN select EXYNOS4_SETUP_SDHCI select EXYNOS4_SETUP_USB_PHY select EXYNOS_DEV_DMA - select EXYNOS_DEV_DRM select EXYNOS_DEV_SYSMMU select S3C24XX_PWM select S3C_DEV_HSMMC @@ -366,7 +368,6 @@ config MACH_SMDK4212 select EXYNOS4_SETUP_SDHCI select EXYNOS4_SETUP_USB_PHY select EXYNOS_DEV_DMA - select EXYNOS_DEV_DRM select EXYNOS_DEV_SYSMMU select S3C24XX_PWM select S3C_DEV_HSMMC2 @@ -400,16 +401,20 @@ config MACH_SMDK4412 Machine support for Samsung SMDK4412 endif +endif + comment "Flattened Device Tree based board for EXYNOS SoCs" config MACH_EXYNOS4_DT bool "Samsung Exynos4 Machine using device tree" depends on ARCH_EXYNOS4 select ARM_AMBA + select CLKSRC_OF select CPU_EXYNOS4210 - select HAVE_SAMSUNG_KEYPAD if INPUT_KEYBOARD + select KEYBOARD_SAMSUNG if INPUT_KEYBOARD select PINCTRL select PINCTRL_EXYNOS + select S5P_DEV_MFC select USE_OF help Machine support for Samsung Exynos4 machine with device tree enabled. @@ -422,6 +427,7 @@ config MACH_EXYNOS5_DT default y depends on ARCH_EXYNOS5 select ARM_AMBA + select CLKSRC_OF select USE_OF help Machine support for Samsung EXYNOS5 machine with device tree enabled. diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile index 435757e57bb4..b09b027178f3 100644 --- a/arch/arm/mach-exynos/Makefile +++ b/arch/arm/mach-exynos/Makefile @@ -13,10 +13,6 @@ obj- := # Core obj-$(CONFIG_ARCH_EXYNOS) += common.o -obj-$(CONFIG_ARCH_EXYNOS4) += clock-exynos4.o -obj-$(CONFIG_CPU_EXYNOS4210) += clock-exynos4210.o -obj-$(CONFIG_SOC_EXYNOS4212) += clock-exynos4212.o -obj-$(CONFIG_SOC_EXYNOS5250) += clock-exynos5.o obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o @@ -26,10 +22,14 @@ obj-$(CONFIG_ARCH_EXYNOS) += pmu.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o -obj-$(CONFIG_EXYNOS4_MCT) += mct.o - obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o +obj-$(CONFIG_ARCH_EXYNOS) += exynos-smc.o +obj-$(CONFIG_ARCH_EXYNOS) += firmware.o + +plus_sec := $(call as-instr,.arch_extension sec,+sec) +AFLAGS_exynos-smc.o :=-Wa,-march=armv7-a$(plus_sec) + # machine support obj-$(CONFIG_MACH_SMDKC210) += mach-smdkv310.o diff --git a/arch/arm/mach-exynos/clock-exynos4.c b/arch/arm/mach-exynos/clock-exynos4.c deleted file mode 100644 index 8a8468d83c8c..000000000000 --- a/arch/arm/mach-exynos/clock-exynos4.c +++ /dev/null @@ -1,1601 +0,0 @@ -/* - * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS4 - Clock support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/err.h> -#include <linux/io.h> -#include <linux/syscore_ops.h> - -#include <plat/cpu-freq.h> -#include <plat/clock.h> -#include <plat/cpu.h> -#include <plat/pll.h> -#include <plat/s5p-clock.h> -#include <plat/clock-clksrc.h> -#include <plat/pm.h> - -#include <mach/map.h> -#include <mach/regs-clock.h> - -#include "common.h" -#include "clock-exynos4.h" - -#ifdef CONFIG_PM_SLEEP -static struct sleep_save exynos4_clock_save[] = { - SAVE_ITEM(EXYNOS4_CLKDIV_LEFTBUS), - SAVE_ITEM(EXYNOS4_CLKGATE_IP_LEFTBUS), - SAVE_ITEM(EXYNOS4_CLKDIV_RIGHTBUS), - SAVE_ITEM(EXYNOS4_CLKGATE_IP_RIGHTBUS), - SAVE_ITEM(EXYNOS4_CLKSRC_TOP0), - SAVE_ITEM(EXYNOS4_CLKSRC_TOP1), - SAVE_ITEM(EXYNOS4_CLKSRC_CAM), - SAVE_ITEM(EXYNOS4_CLKSRC_TV), - SAVE_ITEM(EXYNOS4_CLKSRC_MFC), - SAVE_ITEM(EXYNOS4_CLKSRC_G3D), - SAVE_ITEM(EXYNOS4_CLKSRC_LCD0), - SAVE_ITEM(EXYNOS4_CLKSRC_MAUDIO), - SAVE_ITEM(EXYNOS4_CLKSRC_FSYS), - SAVE_ITEM(EXYNOS4_CLKSRC_PERIL0), - SAVE_ITEM(EXYNOS4_CLKSRC_PERIL1), - SAVE_ITEM(EXYNOS4_CLKDIV_CAM), - SAVE_ITEM(EXYNOS4_CLKDIV_TV), - SAVE_ITEM(EXYNOS4_CLKDIV_MFC), - SAVE_ITEM(EXYNOS4_CLKDIV_G3D), - SAVE_ITEM(EXYNOS4_CLKDIV_LCD0), - SAVE_ITEM(EXYNOS4_CLKDIV_MAUDIO), - SAVE_ITEM(EXYNOS4_CLKDIV_FSYS0), - SAVE_ITEM(EXYNOS4_CLKDIV_FSYS1), - SAVE_ITEM(EXYNOS4_CLKDIV_FSYS2), - SAVE_ITEM(EXYNOS4_CLKDIV_FSYS3), - SAVE_ITEM(EXYNOS4_CLKDIV_PERIL0), - SAVE_ITEM(EXYNOS4_CLKDIV_PERIL1), - SAVE_ITEM(EXYNOS4_CLKDIV_PERIL2), - SAVE_ITEM(EXYNOS4_CLKDIV_PERIL3), - SAVE_ITEM(EXYNOS4_CLKDIV_PERIL4), - SAVE_ITEM(EXYNOS4_CLKDIV_PERIL5), - SAVE_ITEM(EXYNOS4_CLKDIV_TOP), - SAVE_ITEM(EXYNOS4_CLKSRC_MASK_TOP), - SAVE_ITEM(EXYNOS4_CLKSRC_MASK_CAM), - SAVE_ITEM(EXYNOS4_CLKSRC_MASK_TV), - SAVE_ITEM(EXYNOS4_CLKSRC_MASK_LCD0), - SAVE_ITEM(EXYNOS4_CLKSRC_MASK_MAUDIO), - SAVE_ITEM(EXYNOS4_CLKSRC_MASK_FSYS), - SAVE_ITEM(EXYNOS4_CLKSRC_MASK_PERIL0), - SAVE_ITEM(EXYNOS4_CLKSRC_MASK_PERIL1), - SAVE_ITEM(EXYNOS4_CLKDIV2_RATIO), - SAVE_ITEM(EXYNOS4_CLKGATE_SCLKCAM), - SAVE_ITEM(EXYNOS4_CLKGATE_IP_CAM), - SAVE_ITEM(EXYNOS4_CLKGATE_IP_TV), - SAVE_ITEM(EXYNOS4_CLKGATE_IP_MFC), - SAVE_ITEM(EXYNOS4_CLKGATE_IP_G3D), - SAVE_ITEM(EXYNOS4_CLKGATE_IP_LCD0), - SAVE_ITEM(EXYNOS4_CLKGATE_IP_FSYS), - SAVE_ITEM(EXYNOS4_CLKGATE_IP_GPS), - SAVE_ITEM(EXYNOS4_CLKGATE_IP_PERIL), - SAVE_ITEM(EXYNOS4_CLKGATE_BLOCK), - SAVE_ITEM(EXYNOS4_CLKSRC_MASK_DMC), - SAVE_ITEM(EXYNOS4_CLKSRC_DMC), - SAVE_ITEM(EXYNOS4_CLKDIV_DMC0), - SAVE_ITEM(EXYNOS4_CLKDIV_DMC1), - SAVE_ITEM(EXYNOS4_CLKGATE_IP_DMC), - SAVE_ITEM(EXYNOS4_CLKSRC_CPU), - SAVE_ITEM(EXYNOS4_CLKDIV_CPU), - SAVE_ITEM(EXYNOS4_CLKDIV_CPU + 0x4), - SAVE_ITEM(EXYNOS4_CLKGATE_SCLKCPU), - SAVE_ITEM(EXYNOS4_CLKGATE_IP_CPU), -}; -#endif - -static struct clk exynos4_clk_sclk_hdmi27m = { - .name = "sclk_hdmi27m", - .rate = 27000000, -}; - -static struct clk exynos4_clk_sclk_hdmiphy = { - .name = "sclk_hdmiphy", -}; - -static struct clk exynos4_clk_sclk_usbphy0 = { - .name = "sclk_usbphy0", - .rate = 27000000, -}; - -static struct clk exynos4_clk_sclk_usbphy1 = { - .name = "sclk_usbphy1", -}; - -static struct clk dummy_apb_pclk = { - .name = "apb_pclk", - .id = -1, -}; - -static int exynos4_clksrc_mask_top_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_TOP, clk, enable); -} - -static int exynos4_clksrc_mask_cam_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_CAM, clk, enable); -} - -static int exynos4_clksrc_mask_lcd0_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_LCD0, clk, enable); -} - -int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_FSYS, clk, enable); -} - -static int exynos4_clksrc_mask_peril0_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_PERIL0, clk, enable); -} - -static int exynos4_clksrc_mask_peril1_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_PERIL1, clk, enable); -} - -static int exynos4_clk_ip_mfc_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS4_CLKGATE_IP_MFC, clk, enable); -} - -static int exynos4_clksrc_mask_tv_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_TV, clk, enable); -} - -static int exynos4_clk_ip_cam_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS4_CLKGATE_IP_CAM, clk, enable); -} - -static int exynos4_clk_ip_tv_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS4_CLKGATE_IP_TV, clk, enable); -} - -int exynos4_clk_ip_image_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS4_CLKGATE_IP_IMAGE, clk, enable); -} - -static int exynos4_clk_ip_lcd0_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS4_CLKGATE_IP_LCD0, clk, enable); -} - -int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS4210_CLKGATE_IP_LCD1, clk, enable); -} - -int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS4_CLKGATE_IP_FSYS, clk, enable); -} - -static int exynos4_clk_ip_peril_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS4_CLKGATE_IP_PERIL, clk, enable); -} - -static int exynos4_clk_ip_perir_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS4_CLKGATE_IP_PERIR, clk, enable); -} - -int exynos4_clk_ip_dmc_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS4_CLKGATE_IP_DMC, clk, enable); -} - -static int exynos4_clk_hdmiphy_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_HDMI_PHY_CONTROL, clk, enable); -} - -static int exynos4_clk_dac_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_DAC_PHY_CONTROL, clk, enable); -} - -/* Core list of CMU_CPU side */ - -static struct clksrc_clk exynos4_clk_mout_apll = { - .clk = { - .name = "mout_apll", - }, - .sources = &clk_src_apll, - .reg_src = { .reg = EXYNOS4_CLKSRC_CPU, .shift = 0, .size = 1 }, -}; - -static struct clksrc_clk exynos4_clk_sclk_apll = { - .clk = { - .name = "sclk_apll", - .parent = &exynos4_clk_mout_apll.clk, - }, - .reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 24, .size = 3 }, -}; - -static struct clksrc_clk exynos4_clk_mout_epll = { - .clk = { - .name = "mout_epll", - }, - .sources = &clk_src_epll, - .reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 4, .size = 1 }, -}; - -struct clksrc_clk exynos4_clk_mout_mpll = { - .clk = { - .name = "mout_mpll", - }, - .sources = &clk_src_mpll, - - /* reg_src will be added in each SoCs' clock */ -}; - -static struct clk *exynos4_clkset_moutcore_list[] = { - [0] = &exynos4_clk_mout_apll.clk, - [1] = &exynos4_clk_mout_mpll.clk, -}; - -static struct clksrc_sources exynos4_clkset_moutcore = { - .sources = exynos4_clkset_moutcore_list, - .nr_sources = ARRAY_SIZE(exynos4_clkset_moutcore_list), -}; - -static struct clksrc_clk exynos4_clk_moutcore = { - .clk = { - .name = "moutcore", - }, - .sources = &exynos4_clkset_moutcore, - .reg_src = { .reg = EXYNOS4_CLKSRC_CPU, .shift = 16, .size = 1 }, -}; - -static struct clksrc_clk exynos4_clk_coreclk = { - .clk = { - .name = "core_clk", - .parent = &exynos4_clk_moutcore.clk, - }, - .reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 0, .size = 3 }, -}; - -static struct clksrc_clk exynos4_clk_armclk = { - .clk = { - .name = "armclk", - .parent = &exynos4_clk_coreclk.clk, - }, -}; - -static struct clksrc_clk exynos4_clk_aclk_corem0 = { - .clk = { - .name = "aclk_corem0", - .parent = &exynos4_clk_coreclk.clk, - }, - .reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 4, .size = 3 }, -}; - -static struct clksrc_clk exynos4_clk_aclk_cores = { - .clk = { - .name = "aclk_cores", - .parent = &exynos4_clk_coreclk.clk, - }, - .reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 4, .size = 3 }, -}; - -static struct clksrc_clk exynos4_clk_aclk_corem1 = { - .clk = { - .name = "aclk_corem1", - .parent = &exynos4_clk_coreclk.clk, - }, - .reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 8, .size = 3 }, -}; - -static struct clksrc_clk exynos4_clk_periphclk = { - .clk = { - .name = "periphclk", - .parent = &exynos4_clk_coreclk.clk, - }, - .reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 12, .size = 3 }, -}; - -/* Core list of CMU_CORE side */ - -static struct clk *exynos4_clkset_corebus_list[] = { - [0] = &exynos4_clk_mout_mpll.clk, - [1] = &exynos4_clk_sclk_apll.clk, -}; - -struct clksrc_sources exynos4_clkset_mout_corebus = { - .sources = exynos4_clkset_corebus_list, - .nr_sources = ARRAY_SIZE(exynos4_clkset_corebus_list), -}; - -static struct clksrc_clk exynos4_clk_mout_corebus = { - .clk = { - .name = "mout_corebus", - }, - .sources = &exynos4_clkset_mout_corebus, - .reg_src = { .reg = EXYNOS4_CLKSRC_DMC, .shift = 4, .size = 1 }, -}; - -static struct clksrc_clk exynos4_clk_sclk_dmc = { - .clk = { - .name = "sclk_dmc", - .parent = &exynos4_clk_mout_corebus.clk, - }, - .reg_div = { .reg = EXYNOS4_CLKDIV_DMC0, .shift = 12, .size = 3 }, -}; - -static struct clksrc_clk exynos4_clk_aclk_cored = { - .clk = { - .name = "aclk_cored", - .parent = &exynos4_clk_sclk_dmc.clk, - }, - .reg_div = { .reg = EXYNOS4_CLKDIV_DMC0, .shift = 16, .size = 3 }, -}; - -static struct clksrc_clk exynos4_clk_aclk_corep = { - .clk = { - .name = "aclk_corep", - .parent = &exynos4_clk_aclk_cored.clk, - }, - .reg_div = { .reg = EXYNOS4_CLKDIV_DMC0, .shift = 20, .size = 3 }, -}; - -static struct clksrc_clk exynos4_clk_aclk_acp = { - .clk = { - .name = "aclk_acp", - .parent = &exynos4_clk_mout_corebus.clk, - }, - .reg_div = { .reg = EXYNOS4_CLKDIV_DMC0, .shift = 0, .size = 3 }, -}; - -static struct clksrc_clk exynos4_clk_pclk_acp = { - .clk = { - .name = "pclk_acp", - .parent = &exynos4_clk_aclk_acp.clk, - }, - .reg_div = { .reg = EXYNOS4_CLKDIV_DMC0, .shift = 4, .size = 3 }, -}; - -/* Core list of CMU_TOP side */ - -struct clk *exynos4_clkset_aclk_top_list[] = { - [0] = &exynos4_clk_mout_mpll.clk, - [1] = &exynos4_clk_sclk_apll.clk, -}; - -static struct clksrc_sources exynos4_clkset_aclk = { - .sources = exynos4_clkset_aclk_top_list, - .nr_sources = ARRAY_SIZE(exynos4_clkset_aclk_top_list), -}; - -static struct clksrc_clk exynos4_clk_aclk_200 = { - .clk = { - .name = "aclk_200", - }, - .sources = &exynos4_clkset_aclk, - .reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 12, .size = 1 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_TOP, .shift = 0, .size = 3 }, -}; - -static struct clksrc_clk exynos4_clk_aclk_100 = { - .clk = { - .name = "aclk_100", - }, - .sources = &exynos4_clkset_aclk, - .reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 16, .size = 1 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_TOP, .shift = 4, .size = 4 }, -}; - -static struct clksrc_clk exynos4_clk_aclk_160 = { - .clk = { - .name = "aclk_160", - }, - .sources = &exynos4_clkset_aclk, - .reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 20, .size = 1 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_TOP, .shift = 8, .size = 3 }, -}; - -struct clksrc_clk exynos4_clk_aclk_133 = { - .clk = { - .name = "aclk_133", - }, - .sources = &exynos4_clkset_aclk, - .reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 24, .size = 1 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_TOP, .shift = 12, .size = 3 }, -}; - -static struct clk *exynos4_clkset_vpllsrc_list[] = { - [0] = &clk_fin_vpll, - [1] = &exynos4_clk_sclk_hdmi27m, -}; - -static struct clksrc_sources exynos4_clkset_vpllsrc = { - .sources = exynos4_clkset_vpllsrc_list, - .nr_sources = ARRAY_SIZE(exynos4_clkset_vpllsrc_list), -}; - -static struct clksrc_clk exynos4_clk_vpllsrc = { - .clk = { - .name = "vpll_src", - .enable = exynos4_clksrc_mask_top_ctrl, - .ctrlbit = (1 << 0), - }, - .sources = &exynos4_clkset_vpllsrc, - .reg_src = { .reg = EXYNOS4_CLKSRC_TOP1, .shift = 0, .size = 1 }, -}; - -static struct clk *exynos4_clkset_sclk_vpll_list[] = { - [0] = &exynos4_clk_vpllsrc.clk, - [1] = &clk_fout_vpll, -}; - -static struct clksrc_sources exynos4_clkset_sclk_vpll = { - .sources = exynos4_clkset_sclk_vpll_list, - .nr_sources = ARRAY_SIZE(exynos4_clkset_sclk_vpll_list), -}; - -static struct clksrc_clk exynos4_clk_sclk_vpll = { - .clk = { - .name = "sclk_vpll", - }, - .sources = &exynos4_clkset_sclk_vpll, - .reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 8, .size = 1 }, -}; - -static struct clk exynos4_init_clocks_off[] = { - { - .name = "timers", - .parent = &exynos4_clk_aclk_100.clk, - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1<<24), - }, { - .name = "csis", - .devname = "s5p-mipi-csis.0", - .enable = exynos4_clk_ip_cam_ctrl, - .ctrlbit = (1 << 4), - }, { - .name = "csis", - .devname = "s5p-mipi-csis.1", - .enable = exynos4_clk_ip_cam_ctrl, - .ctrlbit = (1 << 5), - }, { - .name = "jpeg", - .id = 0, - .enable = exynos4_clk_ip_cam_ctrl, - .ctrlbit = (1 << 6), - }, { - .name = "fimc", - .devname = "exynos4-fimc.0", - .enable = exynos4_clk_ip_cam_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "fimc", - .devname = "exynos4-fimc.1", - .enable = exynos4_clk_ip_cam_ctrl, - .ctrlbit = (1 << 1), - }, { - .name = "fimc", - .devname = "exynos4-fimc.2", - .enable = exynos4_clk_ip_cam_ctrl, - .ctrlbit = (1 << 2), - }, { - .name = "fimc", - .devname = "exynos4-fimc.3", - .enable = exynos4_clk_ip_cam_ctrl, - .ctrlbit = (1 << 3), - }, { - .name = "tsi", - .enable = exynos4_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 4), - }, { - .name = "hsmmc", - .devname = "exynos4-sdhci.0", - .parent = &exynos4_clk_aclk_133.clk, - .enable = exynos4_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 5), - }, { - .name = "hsmmc", - .devname = "exynos4-sdhci.1", - .parent = &exynos4_clk_aclk_133.clk, - .enable = exynos4_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 6), - }, { - .name = "hsmmc", - .devname = "exynos4-sdhci.2", - .parent = &exynos4_clk_aclk_133.clk, - .enable = exynos4_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 7), - }, { - .name = "hsmmc", - .devname = "exynos4-sdhci.3", - .parent = &exynos4_clk_aclk_133.clk, - .enable = exynos4_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 8), - }, { - .name = "biu", - .parent = &exynos4_clk_aclk_133.clk, - .enable = exynos4_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 9), - }, { - .name = "onenand", - .enable = exynos4_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 15), - }, { - .name = "nfcon", - .enable = exynos4_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 16), - }, { - .name = "dac", - .devname = "s5p-sdo", - .enable = exynos4_clk_ip_tv_ctrl, - .ctrlbit = (1 << 2), - }, { - .name = "mixer", - .devname = "s5p-mixer", - .enable = exynos4_clk_ip_tv_ctrl, - .ctrlbit = (1 << 1), - }, { - .name = "vp", - .devname = "s5p-mixer", - .enable = exynos4_clk_ip_tv_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "hdmi", - .devname = "exynos4-hdmi", - .enable = exynos4_clk_ip_tv_ctrl, - .ctrlbit = (1 << 3), - }, { - .name = "hdmiphy", - .devname = "exynos4-hdmi", - .enable = exynos4_clk_hdmiphy_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "dacphy", - .devname = "s5p-sdo", - .enable = exynos4_clk_dac_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "adc", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 15), - }, { - .name = "tmu_apbif", - .enable = exynos4_clk_ip_perir_ctrl, - .ctrlbit = (1 << 17), - }, { - .name = "keypad", - .enable = exynos4_clk_ip_perir_ctrl, - .ctrlbit = (1 << 16), - }, { - .name = "rtc", - .enable = exynos4_clk_ip_perir_ctrl, - .ctrlbit = (1 << 15), - }, { - .name = "watchdog", - .parent = &exynos4_clk_aclk_100.clk, - .enable = exynos4_clk_ip_perir_ctrl, - .ctrlbit = (1 << 14), - }, { - .name = "usbhost", - .enable = exynos4_clk_ip_fsys_ctrl , - .ctrlbit = (1 << 12), - }, { - .name = "otg", - .enable = exynos4_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 13), - }, { - .name = "spi", - .devname = "exynos4210-spi.0", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 16), - }, { - .name = "spi", - .devname = "exynos4210-spi.1", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 17), - }, { - .name = "spi", - .devname = "exynos4210-spi.2", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 18), - }, { - .name = "iis", - .devname = "samsung-i2s.1", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 20), - }, { - .name = "iis", - .devname = "samsung-i2s.2", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 21), - }, { - .name = "pcm", - .devname = "samsung-pcm.1", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 22), - }, { - .name = "pcm", - .devname = "samsung-pcm.2", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 23), - }, { - .name = "slimbus", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 25), - }, { - .name = "spdif", - .devname = "samsung-spdif", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 26), - }, { - .name = "ac97", - .devname = "samsung-ac97", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 27), - }, { - .name = "mfc", - .devname = "s5p-mfc", - .enable = exynos4_clk_ip_mfc_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "i2c", - .devname = "s3c2440-i2c.0", - .parent = &exynos4_clk_aclk_100.clk, - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 6), - }, { - .name = "i2c", - .devname = "s3c2440-i2c.1", - .parent = &exynos4_clk_aclk_100.clk, - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 7), - }, { - .name = "i2c", - .devname = "s3c2440-i2c.2", - .parent = &exynos4_clk_aclk_100.clk, - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 8), - }, { - .name = "i2c", - .devname = "s3c2440-i2c.3", - .parent = &exynos4_clk_aclk_100.clk, - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 9), - }, { - .name = "i2c", - .devname = "s3c2440-i2c.4", - .parent = &exynos4_clk_aclk_100.clk, - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 10), - }, { - .name = "i2c", - .devname = "s3c2440-i2c.5", - .parent = &exynos4_clk_aclk_100.clk, - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 11), - }, { - .name = "i2c", - .devname = "s3c2440-i2c.6", - .parent = &exynos4_clk_aclk_100.clk, - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 12), - }, { - .name = "i2c", - .devname = "s3c2440-i2c.7", - .parent = &exynos4_clk_aclk_100.clk, - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 13), - }, { - .name = "i2c", - .devname = "s3c2440-hdmiphy-i2c", - .parent = &exynos4_clk_aclk_100.clk, - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 14), - }, { - .name = "sysmmu", - .devname = "exynos-sysmmu.0", - .enable = exynos4_clk_ip_mfc_ctrl, - .ctrlbit = (1 << 1), - }, { - .name = "sysmmu", - .devname = "exynos-sysmmu.1", - .enable = exynos4_clk_ip_mfc_ctrl, - .ctrlbit = (1 << 2), - }, { - .name = "sysmmu", - .devname = "exynos-sysmmu.2", - .enable = exynos4_clk_ip_tv_ctrl, - .ctrlbit = (1 << 4), - }, { - .name = "sysmmu", - .devname = "exynos-sysmmu.3", - .enable = exynos4_clk_ip_cam_ctrl, - .ctrlbit = (1 << 11), - }, { - .name = "sysmmu", - .devname = "exynos-sysmmu.4", - .enable = exynos4_clk_ip_image_ctrl, - .ctrlbit = (1 << 4), - }, { - .name = "sysmmu", - .devname = "exynos-sysmmu.5", - .enable = exynos4_clk_ip_cam_ctrl, - .ctrlbit = (1 << 7), - }, { - .name = "sysmmu", - .devname = "exynos-sysmmu.6", - .enable = exynos4_clk_ip_cam_ctrl, - .ctrlbit = (1 << 8), - }, { - .name = "sysmmu", - .devname = "exynos-sysmmu.7", - .enable = exynos4_clk_ip_cam_ctrl, - .ctrlbit = (1 << 9), - }, { - .name = "sysmmu", - .devname = "exynos-sysmmu.8", - .enable = exynos4_clk_ip_cam_ctrl, - .ctrlbit = (1 << 10), - }, { - .name = "sysmmu", - .devname = "exynos-sysmmu.10", - .enable = exynos4_clk_ip_lcd0_ctrl, - .ctrlbit = (1 << 4), - } -}; - -static struct clk exynos4_init_clocks_on[] = { - { - .name = "uart", - .devname = "s5pv210-uart.0", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "uart", - .devname = "s5pv210-uart.1", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 1), - }, { - .name = "uart", - .devname = "s5pv210-uart.2", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 2), - }, { - .name = "uart", - .devname = "s5pv210-uart.3", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 3), - }, { - .name = "uart", - .devname = "s5pv210-uart.4", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 4), - }, { - .name = "uart", - .devname = "s5pv210-uart.5", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 5), - } -}; - -static struct clk exynos4_clk_pdma0 = { - .name = "dma", - .devname = "dma-pl330.0", - .enable = exynos4_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 0), -}; - -static struct clk exynos4_clk_pdma1 = { - .name = "dma", - .devname = "dma-pl330.1", - .enable = exynos4_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 1), -}; - -static struct clk exynos4_clk_mdma1 = { - .name = "dma", - .devname = "dma-pl330.2", - .enable = exynos4_clk_ip_image_ctrl, - .ctrlbit = ((1 << 8) | (1 << 5) | (1 << 2)), -}; - -static struct clk exynos4_clk_fimd0 = { - .name = "fimd", - .devname = "exynos4-fb.0", - .enable = exynos4_clk_ip_lcd0_ctrl, - .ctrlbit = (1 << 0), -}; - -struct clk *exynos4_clkset_group_list[] = { - [0] = &clk_ext_xtal_mux, - [1] = &clk_xusbxti, - [2] = &exynos4_clk_sclk_hdmi27m, - [3] = &exynos4_clk_sclk_usbphy0, - [4] = &exynos4_clk_sclk_usbphy1, - [5] = &exynos4_clk_sclk_hdmiphy, - [6] = &exynos4_clk_mout_mpll.clk, - [7] = &exynos4_clk_mout_epll.clk, - [8] = &exynos4_clk_sclk_vpll.clk, -}; - -struct clksrc_sources exynos4_clkset_group = { - .sources = exynos4_clkset_group_list, - .nr_sources = ARRAY_SIZE(exynos4_clkset_group_list), -}; - -static struct clk *exynos4_clkset_mout_g2d0_list[] = { - [0] = &exynos4_clk_mout_mpll.clk, - [1] = &exynos4_clk_sclk_apll.clk, -}; - -struct clksrc_sources exynos4_clkset_mout_g2d0 = { - .sources = exynos4_clkset_mout_g2d0_list, - .nr_sources = ARRAY_SIZE(exynos4_clkset_mout_g2d0_list), -}; - -static struct clk *exynos4_clkset_mout_g2d1_list[] = { - [0] = &exynos4_clk_mout_epll.clk, - [1] = &exynos4_clk_sclk_vpll.clk, -}; - -struct clksrc_sources exynos4_clkset_mout_g2d1 = { - .sources = exynos4_clkset_mout_g2d1_list, - .nr_sources = ARRAY_SIZE(exynos4_clkset_mout_g2d1_list), -}; - -static struct clk *exynos4_clkset_mout_mfc0_list[] = { - [0] = &exynos4_clk_mout_mpll.clk, - [1] = &exynos4_clk_sclk_apll.clk, -}; - -static struct clksrc_sources exynos4_clkset_mout_mfc0 = { - .sources = exynos4_clkset_mout_mfc0_list, - .nr_sources = ARRAY_SIZE(exynos4_clkset_mout_mfc0_list), -}; - -static struct clksrc_clk exynos4_clk_mout_mfc0 = { - .clk = { - .name = "mout_mfc0", - }, - .sources = &exynos4_clkset_mout_mfc0, - .reg_src = { .reg = EXYNOS4_CLKSRC_MFC, .shift = 0, .size = 1 }, -}; - -static struct clk *exynos4_clkset_mout_mfc1_list[] = { - [0] = &exynos4_clk_mout_epll.clk, - [1] = &exynos4_clk_sclk_vpll.clk, -}; - -static struct clksrc_sources exynos4_clkset_mout_mfc1 = { - .sources = exynos4_clkset_mout_mfc1_list, - .nr_sources = ARRAY_SIZE(exynos4_clkset_mout_mfc1_list), -}; - -static struct clksrc_clk exynos4_clk_mout_mfc1 = { - .clk = { - .name = "mout_mfc1", - }, - .sources = &exynos4_clkset_mout_mfc1, - .reg_src = { .reg = EXYNOS4_CLKSRC_MFC, .shift = 4, .size = 1 }, -}; - -static struct clk *exynos4_clkset_mout_mfc_list[] = { - [0] = &exynos4_clk_mout_mfc0.clk, - [1] = &exynos4_clk_mout_mfc1.clk, -}; - -static struct clksrc_sources exynos4_clkset_mout_mfc = { - .sources = exynos4_clkset_mout_mfc_list, - .nr_sources = ARRAY_SIZE(exynos4_clkset_mout_mfc_list), -}; - -static struct clk *exynos4_clkset_sclk_dac_list[] = { - [0] = &exynos4_clk_sclk_vpll.clk, - [1] = &exynos4_clk_sclk_hdmiphy, -}; - -static struct clksrc_sources exynos4_clkset_sclk_dac = { - .sources = exynos4_clkset_sclk_dac_list, - .nr_sources = ARRAY_SIZE(exynos4_clkset_sclk_dac_list), -}; - -static struct clksrc_clk exynos4_clk_sclk_dac = { - .clk = { - .name = "sclk_dac", - .enable = exynos4_clksrc_mask_tv_ctrl, - .ctrlbit = (1 << 8), - }, - .sources = &exynos4_clkset_sclk_dac, - .reg_src = { .reg = EXYNOS4_CLKSRC_TV, .shift = 8, .size = 1 }, -}; - -static struct clksrc_clk exynos4_clk_sclk_pixel = { - .clk = { - .name = "sclk_pixel", - .parent = &exynos4_clk_sclk_vpll.clk, - }, - .reg_div = { .reg = EXYNOS4_CLKDIV_TV, .shift = 0, .size = 4 }, -}; - -static struct clk *exynos4_clkset_sclk_hdmi_list[] = { - [0] = &exynos4_clk_sclk_pixel.clk, - [1] = &exynos4_clk_sclk_hdmiphy, -}; - -static struct clksrc_sources exynos4_clkset_sclk_hdmi = { - .sources = exynos4_clkset_sclk_hdmi_list, - .nr_sources = ARRAY_SIZE(exynos4_clkset_sclk_hdmi_list), -}; - -static struct clksrc_clk exynos4_clk_sclk_hdmi = { - .clk = { - .name = "sclk_hdmi", - .enable = exynos4_clksrc_mask_tv_ctrl, - .ctrlbit = (1 << 0), - }, - .sources = &exynos4_clkset_sclk_hdmi, - .reg_src = { .reg = EXYNOS4_CLKSRC_TV, .shift = 0, .size = 1 }, -}; - -static struct clk *exynos4_clkset_sclk_mixer_list[] = { - [0] = &exynos4_clk_sclk_dac.clk, - [1] = &exynos4_clk_sclk_hdmi.clk, -}; - -static struct clksrc_sources exynos4_clkset_sclk_mixer = { - .sources = exynos4_clkset_sclk_mixer_list, - .nr_sources = ARRAY_SIZE(exynos4_clkset_sclk_mixer_list), -}; - -static struct clksrc_clk exynos4_clk_sclk_mixer = { - .clk = { - .name = "sclk_mixer", - .enable = exynos4_clksrc_mask_tv_ctrl, - .ctrlbit = (1 << 4), - }, - .sources = &exynos4_clkset_sclk_mixer, - .reg_src = { .reg = EXYNOS4_CLKSRC_TV, .shift = 4, .size = 1 }, -}; - -static struct clksrc_clk *exynos4_sclk_tv[] = { - &exynos4_clk_sclk_dac, - &exynos4_clk_sclk_pixel, - &exynos4_clk_sclk_hdmi, - &exynos4_clk_sclk_mixer, -}; - -static struct clksrc_clk exynos4_clk_dout_mmc0 = { - .clk = { - .name = "dout_mmc0", - }, - .sources = &exynos4_clkset_group, - .reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 0, .size = 4 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS1, .shift = 0, .size = 4 }, -}; - -static struct clksrc_clk exynos4_clk_dout_mmc1 = { - .clk = { - .name = "dout_mmc1", - }, - .sources = &exynos4_clkset_group, - .reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 4, .size = 4 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS1, .shift = 16, .size = 4 }, -}; - -static struct clksrc_clk exynos4_clk_dout_mmc2 = { - .clk = { - .name = "dout_mmc2", - }, - .sources = &exynos4_clkset_group, - .reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 8, .size = 4 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS2, .shift = 0, .size = 4 }, -}; - -static struct clksrc_clk exynos4_clk_dout_mmc3 = { - .clk = { - .name = "dout_mmc3", - }, - .sources = &exynos4_clkset_group, - .reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 12, .size = 4 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS2, .shift = 16, .size = 4 }, -}; - -static struct clksrc_clk exynos4_clk_dout_mmc4 = { - .clk = { - .name = "dout_mmc4", - }, - .sources = &exynos4_clkset_group, - .reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 16, .size = 4 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS3, .shift = 0, .size = 4 }, -}; - -static struct clksrc_clk exynos4_clksrcs[] = { - { - .clk = { - .name = "sclk_pwm", - .enable = exynos4_clksrc_mask_peril0_ctrl, - .ctrlbit = (1 << 24), - }, - .sources = &exynos4_clkset_group, - .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL0, .shift = 24, .size = 4 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL3, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "sclk_csis", - .devname = "s5p-mipi-csis.0", - .enable = exynos4_clksrc_mask_cam_ctrl, - .ctrlbit = (1 << 24), - }, - .sources = &exynos4_clkset_group, - .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 24, .size = 4 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 24, .size = 4 }, - }, { - .clk = { - .name = "sclk_csis", - .devname = "s5p-mipi-csis.1", - .enable = exynos4_clksrc_mask_cam_ctrl, - .ctrlbit = (1 << 28), - }, - .sources = &exynos4_clkset_group, - .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 28, .size = 4 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 28, .size = 4 }, - }, { - .clk = { - .name = "sclk_cam0", - .enable = exynos4_clksrc_mask_cam_ctrl, - .ctrlbit = (1 << 16), - }, - .sources = &exynos4_clkset_group, - .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 16, .size = 4 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 16, .size = 4 }, - }, { - .clk = { - .name = "sclk_cam1", - .enable = exynos4_clksrc_mask_cam_ctrl, - .ctrlbit = (1 << 20), - }, - .sources = &exynos4_clkset_group, - .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 20, .size = 4 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 20, .size = 4 }, - }, { - .clk = { - .name = "sclk_fimc", - .devname = "exynos4-fimc.0", - .enable = exynos4_clksrc_mask_cam_ctrl, - .ctrlbit = (1 << 0), - }, - .sources = &exynos4_clkset_group, - .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 0, .size = 4 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "sclk_fimc", - .devname = "exynos4-fimc.1", - .enable = exynos4_clksrc_mask_cam_ctrl, - .ctrlbit = (1 << 4), - }, - .sources = &exynos4_clkset_group, - .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 4, .size = 4 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 4, .size = 4 }, - }, { - .clk = { - .name = "sclk_fimc", - .devname = "exynos4-fimc.2", - .enable = exynos4_clksrc_mask_cam_ctrl, - .ctrlbit = (1 << 8), - }, - .sources = &exynos4_clkset_group, - .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 8, .size = 4 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 8, .size = 4 }, - }, { - .clk = { - .name = "sclk_fimc", - .devname = "exynos4-fimc.3", - .enable = exynos4_clksrc_mask_cam_ctrl, - .ctrlbit = (1 << 12), - }, - .sources = &exynos4_clkset_group, - .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 12, .size = 4 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 12, .size = 4 }, - }, { - .clk = { - .name = "sclk_fimd", - .devname = "exynos4-fb.0", - .enable = exynos4_clksrc_mask_lcd0_ctrl, - .ctrlbit = (1 << 0), - }, - .sources = &exynos4_clkset_group, - .reg_src = { .reg = EXYNOS4_CLKSRC_LCD0, .shift = 0, .size = 4 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_LCD0, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "sclk_mfc", - .devname = "s5p-mfc", - }, - .sources = &exynos4_clkset_mout_mfc, - .reg_src = { .reg = EXYNOS4_CLKSRC_MFC, .shift = 8, .size = 1 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_MFC, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "ciu", - .parent = &exynos4_clk_dout_mmc4.clk, - .enable = exynos4_clksrc_mask_fsys_ctrl, - .ctrlbit = (1 << 16), - }, - .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS3, .shift = 8, .size = 8 }, - } -}; - -static struct clksrc_clk exynos4_clk_sclk_uart0 = { - .clk = { - .name = "uclk1", - .devname = "exynos4210-uart.0", - .enable = exynos4_clksrc_mask_peril0_ctrl, - .ctrlbit = (1 << 0), - }, - .sources = &exynos4_clkset_group, - .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL0, .shift = 0, .size = 4 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL0, .shift = 0, .size = 4 }, -}; - -static struct clksrc_clk exynos4_clk_sclk_uart1 = { - .clk = { - .name = "uclk1", - .devname = "exynos4210-uart.1", - .enable = exynos4_clksrc_mask_peril0_ctrl, - .ctrlbit = (1 << 4), - }, - .sources = &exynos4_clkset_group, - .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL0, .shift = 4, .size = 4 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL0, .shift = 4, .size = 4 }, -}; - -static struct clksrc_clk exynos4_clk_sclk_uart2 = { - .clk = { - .name = "uclk1", - .devname = "exynos4210-uart.2", - .enable = exynos4_clksrc_mask_peril0_ctrl, - .ctrlbit = (1 << 8), - }, - .sources = &exynos4_clkset_group, - .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL0, .shift = 8, .size = 4 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL0, .shift = 8, .size = 4 }, -}; - -static struct clksrc_clk exynos4_clk_sclk_uart3 = { - .clk = { - .name = "uclk1", - .devname = "exynos4210-uart.3", - .enable = exynos4_clksrc_mask_peril0_ctrl, - .ctrlbit = (1 << 12), - }, - .sources = &exynos4_clkset_group, - .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL0, .shift = 12, .size = 4 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL0, .shift = 12, .size = 4 }, -}; - -static struct clksrc_clk exynos4_clk_sclk_mmc0 = { - .clk = { - .name = "sclk_mmc", - .devname = "exynos4-sdhci.0", - .parent = &exynos4_clk_dout_mmc0.clk, - .enable = exynos4_clksrc_mask_fsys_ctrl, - .ctrlbit = (1 << 0), - }, - .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS1, .shift = 8, .size = 8 }, -}; - -static struct clksrc_clk exynos4_clk_sclk_mmc1 = { - .clk = { - .name = "sclk_mmc", - .devname = "exynos4-sdhci.1", - .parent = &exynos4_clk_dout_mmc1.clk, - .enable = exynos4_clksrc_mask_fsys_ctrl, - .ctrlbit = (1 << 4), - }, - .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS1, .shift = 24, .size = 8 }, -}; - -static struct clksrc_clk exynos4_clk_sclk_mmc2 = { - .clk = { - .name = "sclk_mmc", - .devname = "exynos4-sdhci.2", - .parent = &exynos4_clk_dout_mmc2.clk, - .enable = exynos4_clksrc_mask_fsys_ctrl, - .ctrlbit = (1 << 8), - }, - .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS2, .shift = 8, .size = 8 }, -}; - -static struct clksrc_clk exynos4_clk_sclk_mmc3 = { - .clk = { - .name = "sclk_mmc", - .devname = "exynos4-sdhci.3", - .parent = &exynos4_clk_dout_mmc3.clk, - .enable = exynos4_clksrc_mask_fsys_ctrl, - .ctrlbit = (1 << 12), - }, - .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS2, .shift = 24, .size = 8 }, -}; - -static struct clksrc_clk exynos4_clk_mdout_spi0 = { - .clk = { - .name = "mdout_spi", - .devname = "exynos4210-spi.0", - }, - .sources = &exynos4_clkset_group, - .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL1, .shift = 16, .size = 4 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL1, .shift = 0, .size = 4 }, -}; - -static struct clksrc_clk exynos4_clk_mdout_spi1 = { - .clk = { - .name = "mdout_spi", - .devname = "exynos4210-spi.1", - }, - .sources = &exynos4_clkset_group, - .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL1, .shift = 20, .size = 4 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL1, .shift = 16, .size = 4 }, -}; - -static struct clksrc_clk exynos4_clk_mdout_spi2 = { - .clk = { - .name = "mdout_spi", - .devname = "exynos4210-spi.2", - }, - .sources = &exynos4_clkset_group, - .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL1, .shift = 24, .size = 4 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL2, .shift = 0, .size = 4 }, -}; - -static struct clksrc_clk exynos4_clk_sclk_spi0 = { - .clk = { - .name = "sclk_spi", - .devname = "exynos4210-spi.0", - .parent = &exynos4_clk_mdout_spi0.clk, - .enable = exynos4_clksrc_mask_peril1_ctrl, - .ctrlbit = (1 << 16), - }, - .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL1, .shift = 8, .size = 8 }, -}; - -static struct clksrc_clk exynos4_clk_sclk_spi1 = { - .clk = { - .name = "sclk_spi", - .devname = "exynos4210-spi.1", - .parent = &exynos4_clk_mdout_spi1.clk, - .enable = exynos4_clksrc_mask_peril1_ctrl, - .ctrlbit = (1 << 20), - }, - .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL1, .shift = 24, .size = 8 }, -}; - -static struct clksrc_clk exynos4_clk_sclk_spi2 = { - .clk = { - .name = "sclk_spi", - .devname = "exynos4210-spi.2", - .parent = &exynos4_clk_mdout_spi2.clk, - .enable = exynos4_clksrc_mask_peril1_ctrl, - .ctrlbit = (1 << 24), - }, - .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL2, .shift = 8, .size = 8 }, -}; - -/* Clock initialization code */ -static struct clksrc_clk *exynos4_sysclks[] = { - &exynos4_clk_mout_apll, - &exynos4_clk_sclk_apll, - &exynos4_clk_mout_epll, - &exynos4_clk_mout_mpll, - &exynos4_clk_moutcore, - &exynos4_clk_coreclk, - &exynos4_clk_armclk, - &exynos4_clk_aclk_corem0, - &exynos4_clk_aclk_cores, - &exynos4_clk_aclk_corem1, - &exynos4_clk_periphclk, - &exynos4_clk_mout_corebus, - &exynos4_clk_sclk_dmc, - &exynos4_clk_aclk_cored, - &exynos4_clk_aclk_corep, - &exynos4_clk_aclk_acp, - &exynos4_clk_pclk_acp, - &exynos4_clk_vpllsrc, - &exynos4_clk_sclk_vpll, - &exynos4_clk_aclk_200, - &exynos4_clk_aclk_100, - &exynos4_clk_aclk_160, - &exynos4_clk_aclk_133, - &exynos4_clk_dout_mmc0, - &exynos4_clk_dout_mmc1, - &exynos4_clk_dout_mmc2, - &exynos4_clk_dout_mmc3, - &exynos4_clk_dout_mmc4, - &exynos4_clk_mout_mfc0, - &exynos4_clk_mout_mfc1, -}; - -static struct clk *exynos4_clk_cdev[] = { - &exynos4_clk_pdma0, - &exynos4_clk_pdma1, - &exynos4_clk_mdma1, - &exynos4_clk_fimd0, -}; - -static struct clksrc_clk *exynos4_clksrc_cdev[] = { - &exynos4_clk_sclk_uart0, - &exynos4_clk_sclk_uart1, - &exynos4_clk_sclk_uart2, - &exynos4_clk_sclk_uart3, - &exynos4_clk_sclk_mmc0, - &exynos4_clk_sclk_mmc1, - &exynos4_clk_sclk_mmc2, - &exynos4_clk_sclk_mmc3, - &exynos4_clk_sclk_spi0, - &exynos4_clk_sclk_spi1, - &exynos4_clk_sclk_spi2, - &exynos4_clk_mdout_spi0, - &exynos4_clk_mdout_spi1, - &exynos4_clk_mdout_spi2, -}; - -static struct clk_lookup exynos4_clk_lookup[] = { - CLKDEV_INIT("exynos4210-uart.0", "clk_uart_baud0", &exynos4_clk_sclk_uart0.clk), - CLKDEV_INIT("exynos4210-uart.1", "clk_uart_baud0", &exynos4_clk_sclk_uart1.clk), - CLKDEV_INIT("exynos4210-uart.2", "clk_uart_baud0", &exynos4_clk_sclk_uart2.clk), - CLKDEV_INIT("exynos4210-uart.3", "clk_uart_baud0", &exynos4_clk_sclk_uart3.clk), - CLKDEV_INIT("exynos4-sdhci.0", "mmc_busclk.2", &exynos4_clk_sclk_mmc0.clk), - CLKDEV_INIT("exynos4-sdhci.1", "mmc_busclk.2", &exynos4_clk_sclk_mmc1.clk), - CLKDEV_INIT("exynos4-sdhci.2", "mmc_busclk.2", &exynos4_clk_sclk_mmc2.clk), - CLKDEV_INIT("exynos4-sdhci.3", "mmc_busclk.2", &exynos4_clk_sclk_mmc3.clk), - CLKDEV_INIT("exynos4-fb.0", "lcd", &exynos4_clk_fimd0), - CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos4_clk_pdma0), - CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos4_clk_pdma1), - CLKDEV_INIT("dma-pl330.2", "apb_pclk", &exynos4_clk_mdma1), - CLKDEV_INIT("exynos4210-spi.0", "spi_busclk0", &exynos4_clk_sclk_spi0.clk), - CLKDEV_INIT("exynos4210-spi.1", "spi_busclk0", &exynos4_clk_sclk_spi1.clk), - CLKDEV_INIT("exynos4210-spi.2", "spi_busclk0", &exynos4_clk_sclk_spi2.clk), -}; - -static int xtal_rate; - -static unsigned long exynos4_fout_apll_get_rate(struct clk *clk) -{ - if (soc_is_exynos4210()) - return s5p_get_pll45xx(xtal_rate, __raw_readl(EXYNOS4_APLL_CON0), - pll_4508); - else if (soc_is_exynos4212() || soc_is_exynos4412()) - return s5p_get_pll35xx(xtal_rate, __raw_readl(EXYNOS4_APLL_CON0)); - else - return 0; -} - -static struct clk_ops exynos4_fout_apll_ops = { - .get_rate = exynos4_fout_apll_get_rate, -}; - -static u32 exynos4_vpll_div[][8] = { - { 54000000, 3, 53, 3, 1024, 0, 17, 0 }, - { 108000000, 3, 53, 2, 1024, 0, 17, 0 }, -}; - -static unsigned long exynos4_vpll_get_rate(struct clk *clk) -{ - return clk->rate; -} - -static int exynos4_vpll_set_rate(struct clk *clk, unsigned long rate) -{ - unsigned int vpll_con0, vpll_con1 = 0; - unsigned int i; - - /* Return if nothing changed */ - if (clk->rate == rate) - return 0; - - vpll_con0 = __raw_readl(EXYNOS4_VPLL_CON0); - vpll_con0 &= ~(0x1 << 27 | \ - PLL90XX_MDIV_MASK << PLL46XX_MDIV_SHIFT | \ - PLL90XX_PDIV_MASK << PLL46XX_PDIV_SHIFT | \ - PLL90XX_SDIV_MASK << PLL46XX_SDIV_SHIFT); - - vpll_con1 = __raw_readl(EXYNOS4_VPLL_CON1); - vpll_con1 &= ~(PLL46XX_MRR_MASK << PLL46XX_MRR_SHIFT | \ - PLL46XX_MFR_MASK << PLL46XX_MFR_SHIFT | \ - PLL4650C_KDIV_MASK << PLL46XX_KDIV_SHIFT); - - for (i = 0; i < ARRAY_SIZE(exynos4_vpll_div); i++) { - if (exynos4_vpll_div[i][0] == rate) { - vpll_con0 |= exynos4_vpll_div[i][1] << PLL46XX_PDIV_SHIFT; - vpll_con0 |= exynos4_vpll_div[i][2] << PLL46XX_MDIV_SHIFT; - vpll_con0 |= exynos4_vpll_div[i][3] << PLL46XX_SDIV_SHIFT; - vpll_con1 |= exynos4_vpll_div[i][4] << PLL46XX_KDIV_SHIFT; - vpll_con1 |= exynos4_vpll_div[i][5] << PLL46XX_MFR_SHIFT; - vpll_con1 |= exynos4_vpll_div[i][6] << PLL46XX_MRR_SHIFT; - vpll_con0 |= exynos4_vpll_div[i][7] << 27; - break; - } - } - - if (i == ARRAY_SIZE(exynos4_vpll_div)) { - printk(KERN_ERR "%s: Invalid Clock VPLL Frequency\n", - __func__); - return -EINVAL; - } - - __raw_writel(vpll_con0, EXYNOS4_VPLL_CON0); - __raw_writel(vpll_con1, EXYNOS4_VPLL_CON1); - - /* Wait for VPLL lock */ - while (!(__raw_readl(EXYNOS4_VPLL_CON0) & (1 << PLL46XX_LOCKED_SHIFT))) - continue; - - clk->rate = rate; - return 0; -} - -static struct clk_ops exynos4_vpll_ops = { - .get_rate = exynos4_vpll_get_rate, - .set_rate = exynos4_vpll_set_rate, -}; - -void __init_or_cpufreq exynos4_setup_clocks(void) -{ - struct clk *xtal_clk; - unsigned long apll = 0; - unsigned long mpll = 0; - unsigned long epll = 0; - unsigned long vpll = 0; - unsigned long vpllsrc; - unsigned long xtal; - unsigned long armclk; - unsigned long sclk_dmc; - unsigned long aclk_200; - unsigned long aclk_100; - unsigned long aclk_160; - unsigned long aclk_133; - unsigned int ptr; - - printk(KERN_DEBUG "%s: registering clocks\n", __func__); - - xtal_clk = clk_get(NULL, "xtal"); - BUG_ON(IS_ERR(xtal_clk)); - - xtal = clk_get_rate(xtal_clk); - - xtal_rate = xtal; - - clk_put(xtal_clk); - - printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal); - - if (soc_is_exynos4210()) { - apll = s5p_get_pll45xx(xtal, __raw_readl(EXYNOS4_APLL_CON0), - pll_4508); - mpll = s5p_get_pll45xx(xtal, __raw_readl(EXYNOS4_MPLL_CON0), - pll_4508); - epll = s5p_get_pll46xx(xtal, __raw_readl(EXYNOS4_EPLL_CON0), - __raw_readl(EXYNOS4_EPLL_CON1), pll_4600); - - vpllsrc = clk_get_rate(&exynos4_clk_vpllsrc.clk); - vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(EXYNOS4_VPLL_CON0), - __raw_readl(EXYNOS4_VPLL_CON1), pll_4650c); - } else if (soc_is_exynos4212() || soc_is_exynos4412()) { - apll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS4_APLL_CON0)); - mpll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS4_MPLL_CON0)); - epll = s5p_get_pll36xx(xtal, __raw_readl(EXYNOS4_EPLL_CON0), - __raw_readl(EXYNOS4_EPLL_CON1)); - - vpllsrc = clk_get_rate(&exynos4_clk_vpllsrc.clk); - vpll = s5p_get_pll36xx(vpllsrc, __raw_readl(EXYNOS4_VPLL_CON0), - __raw_readl(EXYNOS4_VPLL_CON1)); - } else { - /* nothing */ - } - - clk_fout_apll.ops = &exynos4_fout_apll_ops; - clk_fout_mpll.rate = mpll; - clk_fout_epll.rate = epll; - clk_fout_vpll.ops = &exynos4_vpll_ops; - clk_fout_vpll.rate = vpll; - - printk(KERN_INFO "EXYNOS4: PLL settings, A=%ld, M=%ld, E=%ld V=%ld", - apll, mpll, epll, vpll); - - armclk = clk_get_rate(&exynos4_clk_armclk.clk); - sclk_dmc = clk_get_rate(&exynos4_clk_sclk_dmc.clk); - - aclk_200 = clk_get_rate(&exynos4_clk_aclk_200.clk); - aclk_100 = clk_get_rate(&exynos4_clk_aclk_100.clk); - aclk_160 = clk_get_rate(&exynos4_clk_aclk_160.clk); - aclk_133 = clk_get_rate(&exynos4_clk_aclk_133.clk); - - printk(KERN_INFO "EXYNOS4: ARMCLK=%ld, DMC=%ld, ACLK200=%ld\n" - "ACLK100=%ld, ACLK160=%ld, ACLK133=%ld\n", - armclk, sclk_dmc, aclk_200, - aclk_100, aclk_160, aclk_133); - - clk_f.rate = armclk; - clk_h.rate = sclk_dmc; - clk_p.rate = aclk_100; - - for (ptr = 0; ptr < ARRAY_SIZE(exynos4_clksrcs); ptr++) - s3c_set_clksrc(&exynos4_clksrcs[ptr], true); -} - -static struct clk *exynos4_clks[] __initdata = { - &exynos4_clk_sclk_hdmi27m, - &exynos4_clk_sclk_hdmiphy, - &exynos4_clk_sclk_usbphy0, - &exynos4_clk_sclk_usbphy1, -}; - -#ifdef CONFIG_PM_SLEEP -static int exynos4_clock_suspend(void) -{ - s3c_pm_do_save(exynos4_clock_save, ARRAY_SIZE(exynos4_clock_save)); - return 0; -} - -static void exynos4_clock_resume(void) -{ - s3c_pm_do_restore_core(exynos4_clock_save, ARRAY_SIZE(exynos4_clock_save)); -} - -#else -#define exynos4_clock_suspend NULL -#define exynos4_clock_resume NULL -#endif - -static struct syscore_ops exynos4_clock_syscore_ops = { - .suspend = exynos4_clock_suspend, - .resume = exynos4_clock_resume, -}; - -void __init exynos4_register_clocks(void) -{ - int ptr; - - s3c24xx_register_clocks(exynos4_clks, ARRAY_SIZE(exynos4_clks)); - - for (ptr = 0; ptr < ARRAY_SIZE(exynos4_sysclks); ptr++) - s3c_register_clksrc(exynos4_sysclks[ptr], 1); - - for (ptr = 0; ptr < ARRAY_SIZE(exynos4_sclk_tv); ptr++) - s3c_register_clksrc(exynos4_sclk_tv[ptr], 1); - - for (ptr = 0; ptr < ARRAY_SIZE(exynos4_clksrc_cdev); ptr++) - s3c_register_clksrc(exynos4_clksrc_cdev[ptr], 1); - - s3c_register_clksrc(exynos4_clksrcs, ARRAY_SIZE(exynos4_clksrcs)); - s3c_register_clocks(exynos4_init_clocks_on, ARRAY_SIZE(exynos4_init_clocks_on)); - - s3c24xx_register_clocks(exynos4_clk_cdev, ARRAY_SIZE(exynos4_clk_cdev)); - for (ptr = 0; ptr < ARRAY_SIZE(exynos4_clk_cdev); ptr++) - s3c_disable_clocks(exynos4_clk_cdev[ptr], 1); - - s3c_register_clocks(exynos4_init_clocks_off, ARRAY_SIZE(exynos4_init_clocks_off)); - s3c_disable_clocks(exynos4_init_clocks_off, ARRAY_SIZE(exynos4_init_clocks_off)); - clkdev_add_table(exynos4_clk_lookup, ARRAY_SIZE(exynos4_clk_lookup)); - - register_syscore_ops(&exynos4_clock_syscore_ops); - s3c24xx_register_clock(&dummy_apb_pclk); - - s3c_pwmclk_init(); -} diff --git a/arch/arm/mach-exynos/clock-exynos4.h b/arch/arm/mach-exynos/clock-exynos4.h deleted file mode 100644 index bd12d5f8b63d..000000000000 --- a/arch/arm/mach-exynos/clock-exynos4.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Header file for exynos4 clock support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_CLOCK_H -#define __ASM_ARCH_CLOCK_H __FILE__ - -#include <linux/clk.h> - -extern struct clksrc_clk exynos4_clk_aclk_133; -extern struct clksrc_clk exynos4_clk_mout_mpll; - -extern struct clksrc_sources exynos4_clkset_mout_corebus; -extern struct clksrc_sources exynos4_clkset_group; - -extern struct clk *exynos4_clkset_aclk_top_list[]; -extern struct clk *exynos4_clkset_group_list[]; - -extern struct clksrc_sources exynos4_clkset_mout_g2d0; -extern struct clksrc_sources exynos4_clkset_mout_g2d1; - -extern int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable); -extern int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable); -extern int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable); -extern int exynos4_clk_ip_image_ctrl(struct clk *clk, int enable); -extern int exynos4_clk_ip_dmc_ctrl(struct clk *clk, int enable); - -#endif /* __ASM_ARCH_CLOCK_H */ diff --git a/arch/arm/mach-exynos/clock-exynos4210.c b/arch/arm/mach-exynos/clock-exynos4210.c deleted file mode 100644 index 19af9f783c56..000000000000 --- a/arch/arm/mach-exynos/clock-exynos4210.c +++ /dev/null @@ -1,187 +0,0 @@ -/* - * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS4210 - Clock support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/syscore_ops.h> - -#include <plat/cpu-freq.h> -#include <plat/clock.h> -#include <plat/cpu.h> -#include <plat/pll.h> -#include <plat/s5p-clock.h> -#include <plat/clock-clksrc.h> -#include <plat/pm.h> - -#include <mach/hardware.h> -#include <mach/map.h> -#include <mach/regs-clock.h> - -#include "common.h" -#include "clock-exynos4.h" - -#ifdef CONFIG_PM_SLEEP -static struct sleep_save exynos4210_clock_save[] = { - SAVE_ITEM(EXYNOS4_CLKSRC_IMAGE), - SAVE_ITEM(EXYNOS4_CLKDIV_IMAGE), - SAVE_ITEM(EXYNOS4210_CLKSRC_LCD1), - SAVE_ITEM(EXYNOS4210_CLKDIV_LCD1), - SAVE_ITEM(EXYNOS4210_CLKSRC_MASK_LCD1), - SAVE_ITEM(EXYNOS4210_CLKGATE_IP_IMAGE), - SAVE_ITEM(EXYNOS4210_CLKGATE_IP_LCD1), - SAVE_ITEM(EXYNOS4210_CLKGATE_IP_PERIR), -}; -#endif - -static struct clksrc_clk *sysclks[] = { - /* nothing here yet */ -}; - -static struct clksrc_clk exynos4210_clk_mout_g2d0 = { - .clk = { - .name = "mout_g2d0", - }, - .sources = &exynos4_clkset_mout_g2d0, - .reg_src = { .reg = EXYNOS4_CLKSRC_IMAGE, .shift = 0, .size = 1 }, -}; - -static struct clksrc_clk exynos4210_clk_mout_g2d1 = { - .clk = { - .name = "mout_g2d1", - }, - .sources = &exynos4_clkset_mout_g2d1, - .reg_src = { .reg = EXYNOS4_CLKSRC_IMAGE, .shift = 4, .size = 1 }, -}; - -static struct clk *exynos4210_clkset_mout_g2d_list[] = { - [0] = &exynos4210_clk_mout_g2d0.clk, - [1] = &exynos4210_clk_mout_g2d1.clk, -}; - -static struct clksrc_sources exynos4210_clkset_mout_g2d = { - .sources = exynos4210_clkset_mout_g2d_list, - .nr_sources = ARRAY_SIZE(exynos4210_clkset_mout_g2d_list), -}; - -static int exynos4_clksrc_mask_lcd1_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS4210_CLKSRC_MASK_LCD1, clk, enable); -} - -static struct clksrc_clk clksrcs[] = { - { - .clk = { - .name = "sclk_sata", - .id = -1, - .enable = exynos4_clksrc_mask_fsys_ctrl, - .ctrlbit = (1 << 24), - }, - .sources = &exynos4_clkset_mout_corebus, - .reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 24, .size = 1 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS0, .shift = 20, .size = 4 }, - }, { - .clk = { - .name = "sclk_fimd", - .devname = "exynos4-fb.1", - .enable = exynos4_clksrc_mask_lcd1_ctrl, - .ctrlbit = (1 << 0), - }, - .sources = &exynos4_clkset_group, - .reg_src = { .reg = EXYNOS4210_CLKSRC_LCD1, .shift = 0, .size = 4 }, - .reg_div = { .reg = EXYNOS4210_CLKDIV_LCD1, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "sclk_fimg2d", - }, - .sources = &exynos4210_clkset_mout_g2d, - .reg_src = { .reg = EXYNOS4_CLKSRC_IMAGE, .shift = 8, .size = 1 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_IMAGE, .shift = 0, .size = 4 }, - }, -}; - -static struct clk init_clocks_off[] = { - { - .name = "sataphy", - .id = -1, - .parent = &exynos4_clk_aclk_133.clk, - .enable = exynos4_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 3), - }, { - .name = "sata", - .id = -1, - .parent = &exynos4_clk_aclk_133.clk, - .enable = exynos4_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 10), - }, { - .name = "fimd", - .devname = "exynos4-fb.1", - .enable = exynos4_clk_ip_lcd1_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "sysmmu", - .devname = "exynos-sysmmu.9", - .enable = exynos4_clk_ip_image_ctrl, - .ctrlbit = (1 << 3), - }, { - .name = "sysmmu", - .devname = "exynos-sysmmu.11", - .enable = exynos4_clk_ip_lcd1_ctrl, - .ctrlbit = (1 << 4), - }, { - .name = "fimg2d", - .enable = exynos4_clk_ip_image_ctrl, - .ctrlbit = (1 << 0), - }, -}; - -#ifdef CONFIG_PM_SLEEP -static int exynos4210_clock_suspend(void) -{ - s3c_pm_do_save(exynos4210_clock_save, ARRAY_SIZE(exynos4210_clock_save)); - - return 0; -} - -static void exynos4210_clock_resume(void) -{ - s3c_pm_do_restore_core(exynos4210_clock_save, ARRAY_SIZE(exynos4210_clock_save)); -} - -#else -#define exynos4210_clock_suspend NULL -#define exynos4210_clock_resume NULL -#endif - -static struct syscore_ops exynos4210_clock_syscore_ops = { - .suspend = exynos4210_clock_suspend, - .resume = exynos4210_clock_resume, -}; - -void __init exynos4210_register_clocks(void) -{ - int ptr; - - exynos4_clk_mout_mpll.reg_src.reg = EXYNOS4_CLKSRC_CPU; - exynos4_clk_mout_mpll.reg_src.shift = 8; - exynos4_clk_mout_mpll.reg_src.size = 1; - - for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++) - s3c_register_clksrc(sysclks[ptr], 1); - - s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); - - s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - - register_syscore_ops(&exynos4210_clock_syscore_ops); -} diff --git a/arch/arm/mach-exynos/clock-exynos4212.c b/arch/arm/mach-exynos/clock-exynos4212.c deleted file mode 100644 index 529476f8ec71..000000000000 --- a/arch/arm/mach-exynos/clock-exynos4212.c +++ /dev/null @@ -1,201 +0,0 @@ -/* - * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS4212 - Clock support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/syscore_ops.h> - -#include <plat/cpu-freq.h> -#include <plat/clock.h> -#include <plat/cpu.h> -#include <plat/pll.h> -#include <plat/s5p-clock.h> -#include <plat/clock-clksrc.h> -#include <plat/pm.h> - -#include <mach/hardware.h> -#include <mach/map.h> -#include <mach/regs-clock.h> - -#include "common.h" -#include "clock-exynos4.h" - -#ifdef CONFIG_PM_SLEEP -static struct sleep_save exynos4212_clock_save[] = { - SAVE_ITEM(EXYNOS4_CLKSRC_IMAGE), - SAVE_ITEM(EXYNOS4_CLKDIV_IMAGE), - SAVE_ITEM(EXYNOS4212_CLKGATE_IP_IMAGE), - SAVE_ITEM(EXYNOS4212_CLKGATE_IP_PERIR), -}; -#endif - -static int exynos4212_clk_ip_isp0_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS4_CLKGATE_IP_ISP0, clk, enable); -} - -static int exynos4212_clk_ip_isp1_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS4_CLKGATE_IP_ISP1, clk, enable); -} - -static struct clk *clk_src_mpll_user_list[] = { - [0] = &clk_fin_mpll, - [1] = &exynos4_clk_mout_mpll.clk, -}; - -static struct clksrc_sources clk_src_mpll_user = { - .sources = clk_src_mpll_user_list, - .nr_sources = ARRAY_SIZE(clk_src_mpll_user_list), -}; - -static struct clksrc_clk clk_mout_mpll_user = { - .clk = { - .name = "mout_mpll_user", - }, - .sources = &clk_src_mpll_user, - .reg_src = { .reg = EXYNOS4_CLKSRC_CPU, .shift = 24, .size = 1 }, -}; - -static struct clksrc_clk exynos4x12_clk_mout_g2d0 = { - .clk = { - .name = "mout_g2d0", - }, - .sources = &exynos4_clkset_mout_g2d0, - .reg_src = { .reg = EXYNOS4_CLKSRC_DMC, .shift = 20, .size = 1 }, -}; - -static struct clksrc_clk exynos4x12_clk_mout_g2d1 = { - .clk = { - .name = "mout_g2d1", - }, - .sources = &exynos4_clkset_mout_g2d1, - .reg_src = { .reg = EXYNOS4_CLKSRC_DMC, .shift = 24, .size = 1 }, -}; - -static struct clk *exynos4x12_clkset_mout_g2d_list[] = { - [0] = &exynos4x12_clk_mout_g2d0.clk, - [1] = &exynos4x12_clk_mout_g2d1.clk, -}; - -static struct clksrc_sources exynos4x12_clkset_mout_g2d = { - .sources = exynos4x12_clkset_mout_g2d_list, - .nr_sources = ARRAY_SIZE(exynos4x12_clkset_mout_g2d_list), -}; - -static struct clksrc_clk *sysclks[] = { - &clk_mout_mpll_user, -}; - -static struct clksrc_clk clksrcs[] = { - { - .clk = { - .name = "sclk_fimg2d", - }, - .sources = &exynos4x12_clkset_mout_g2d, - .reg_src = { .reg = EXYNOS4_CLKSRC_DMC, .shift = 28, .size = 1 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_DMC1, .shift = 0, .size = 4 }, - }, -}; - -static struct clk init_clocks_off[] = { - { - .name = "sysmmu", - .devname = "exynos-sysmmu.9", - .enable = exynos4_clk_ip_dmc_ctrl, - .ctrlbit = (1 << 24), - }, { - .name = "sysmmu", - .devname = "exynos-sysmmu.12", - .enable = exynos4212_clk_ip_isp0_ctrl, - .ctrlbit = (7 << 8), - }, { - .name = "sysmmu", - .devname = "exynos-sysmmu.13", - .enable = exynos4212_clk_ip_isp1_ctrl, - .ctrlbit = (1 << 4), - }, { - .name = "sysmmu", - .devname = "exynos-sysmmu.14", - .enable = exynos4212_clk_ip_isp0_ctrl, - .ctrlbit = (1 << 11), - }, { - .name = "sysmmu", - .devname = "exynos-sysmmu.15", - .enable = exynos4212_clk_ip_isp0_ctrl, - .ctrlbit = (1 << 12), - }, { - .name = "flite", - .devname = "exynos-fimc-lite.0", - .enable = exynos4212_clk_ip_isp0_ctrl, - .ctrlbit = (1 << 4), - }, { - .name = "flite", - .devname = "exynos-fimc-lite.1", - .enable = exynos4212_clk_ip_isp0_ctrl, - .ctrlbit = (1 << 3), - }, { - .name = "fimg2d", - .enable = exynos4_clk_ip_dmc_ctrl, - .ctrlbit = (1 << 23), - }, -}; - -#ifdef CONFIG_PM_SLEEP -static int exynos4212_clock_suspend(void) -{ - s3c_pm_do_save(exynos4212_clock_save, ARRAY_SIZE(exynos4212_clock_save)); - - return 0; -} - -static void exynos4212_clock_resume(void) -{ - s3c_pm_do_restore_core(exynos4212_clock_save, ARRAY_SIZE(exynos4212_clock_save)); -} - -#else -#define exynos4212_clock_suspend NULL -#define exynos4212_clock_resume NULL -#endif - -static struct syscore_ops exynos4212_clock_syscore_ops = { - .suspend = exynos4212_clock_suspend, - .resume = exynos4212_clock_resume, -}; - -void __init exynos4212_register_clocks(void) -{ - int ptr; - - /* usbphy1 is removed */ - exynos4_clkset_group_list[4] = NULL; - - /* mout_mpll_user is used */ - exynos4_clkset_group_list[6] = &clk_mout_mpll_user.clk; - exynos4_clkset_aclk_top_list[0] = &clk_mout_mpll_user.clk; - - exynos4_clk_mout_mpll.reg_src.reg = EXYNOS4_CLKSRC_DMC; - exynos4_clk_mout_mpll.reg_src.shift = 12; - exynos4_clk_mout_mpll.reg_src.size = 1; - - for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++) - s3c_register_clksrc(sysclks[ptr], 1); - - s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); - - s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - - register_syscore_ops(&exynos4212_clock_syscore_ops); -} diff --git a/arch/arm/mach-exynos/clock-exynos5.c b/arch/arm/mach-exynos/clock-exynos5.c deleted file mode 100644 index b0ea31fc9fb8..000000000000 --- a/arch/arm/mach-exynos/clock-exynos5.c +++ /dev/null @@ -1,1645 +0,0 @@ -/* - * Copyright (c) 2012 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Clock support for EXYNOS5 SoCs - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/err.h> -#include <linux/io.h> -#include <linux/syscore_ops.h> - -#include <plat/cpu-freq.h> -#include <plat/clock.h> -#include <plat/cpu.h> -#include <plat/pll.h> -#include <plat/s5p-clock.h> -#include <plat/clock-clksrc.h> -#include <plat/pm.h> - -#include <mach/map.h> -#include <mach/regs-clock.h> - -#include "common.h" - -#ifdef CONFIG_PM_SLEEP -static struct sleep_save exynos5_clock_save[] = { - SAVE_ITEM(EXYNOS5_CLKSRC_MASK_TOP), - SAVE_ITEM(EXYNOS5_CLKSRC_MASK_GSCL), - SAVE_ITEM(EXYNOS5_CLKSRC_MASK_DISP1_0), - SAVE_ITEM(EXYNOS5_CLKSRC_MASK_FSYS), - SAVE_ITEM(EXYNOS5_CLKSRC_MASK_MAUDIO), - SAVE_ITEM(EXYNOS5_CLKSRC_MASK_PERIC0), - SAVE_ITEM(EXYNOS5_CLKSRC_MASK_PERIC1), - SAVE_ITEM(EXYNOS5_CLKGATE_IP_GSCL), - SAVE_ITEM(EXYNOS5_CLKGATE_IP_DISP1), - SAVE_ITEM(EXYNOS5_CLKGATE_IP_MFC), - SAVE_ITEM(EXYNOS5_CLKGATE_IP_G3D), - SAVE_ITEM(EXYNOS5_CLKGATE_IP_GEN), - SAVE_ITEM(EXYNOS5_CLKGATE_IP_FSYS), - SAVE_ITEM(EXYNOS5_CLKGATE_IP_PERIC), - SAVE_ITEM(EXYNOS5_CLKGATE_IP_PERIS), - SAVE_ITEM(EXYNOS5_CLKGATE_BLOCK), - SAVE_ITEM(EXYNOS5_CLKDIV_TOP0), - SAVE_ITEM(EXYNOS5_CLKDIV_TOP1), - SAVE_ITEM(EXYNOS5_CLKDIV_GSCL), - SAVE_ITEM(EXYNOS5_CLKDIV_DISP1_0), - SAVE_ITEM(EXYNOS5_CLKDIV_GEN), - SAVE_ITEM(EXYNOS5_CLKDIV_MAUDIO), - SAVE_ITEM(EXYNOS5_CLKDIV_FSYS0), - SAVE_ITEM(EXYNOS5_CLKDIV_FSYS1), - SAVE_ITEM(EXYNOS5_CLKDIV_FSYS2), - SAVE_ITEM(EXYNOS5_CLKDIV_FSYS3), - SAVE_ITEM(EXYNOS5_CLKDIV_PERIC0), - SAVE_ITEM(EXYNOS5_CLKDIV_PERIC1), - SAVE_ITEM(EXYNOS5_CLKDIV_PERIC2), - SAVE_ITEM(EXYNOS5_CLKDIV_PERIC3), - SAVE_ITEM(EXYNOS5_CLKDIV_PERIC4), - SAVE_ITEM(EXYNOS5_CLKDIV_PERIC5), - SAVE_ITEM(EXYNOS5_SCLK_DIV_ISP), - SAVE_ITEM(EXYNOS5_CLKSRC_TOP0), - SAVE_ITEM(EXYNOS5_CLKSRC_TOP1), - SAVE_ITEM(EXYNOS5_CLKSRC_TOP2), - SAVE_ITEM(EXYNOS5_CLKSRC_TOP3), - SAVE_ITEM(EXYNOS5_CLKSRC_GSCL), - SAVE_ITEM(EXYNOS5_CLKSRC_DISP1_0), - SAVE_ITEM(EXYNOS5_CLKSRC_MAUDIO), - SAVE_ITEM(EXYNOS5_CLKSRC_FSYS), - SAVE_ITEM(EXYNOS5_CLKSRC_PERIC0), - SAVE_ITEM(EXYNOS5_CLKSRC_PERIC1), - SAVE_ITEM(EXYNOS5_SCLK_SRC_ISP), - SAVE_ITEM(EXYNOS5_EPLL_CON0), - SAVE_ITEM(EXYNOS5_EPLL_CON1), - SAVE_ITEM(EXYNOS5_EPLL_CON2), - SAVE_ITEM(EXYNOS5_VPLL_CON0), - SAVE_ITEM(EXYNOS5_VPLL_CON1), - SAVE_ITEM(EXYNOS5_VPLL_CON2), - SAVE_ITEM(EXYNOS5_PWR_CTRL1), - SAVE_ITEM(EXYNOS5_PWR_CTRL2), -}; -#endif - -static struct clk exynos5_clk_sclk_dptxphy = { - .name = "sclk_dptx", -}; - -static struct clk exynos5_clk_sclk_hdmi24m = { - .name = "sclk_hdmi24m", - .rate = 24000000, -}; - -static struct clk exynos5_clk_sclk_hdmi27m = { - .name = "sclk_hdmi27m", - .rate = 27000000, -}; - -static struct clk exynos5_clk_sclk_hdmiphy = { - .name = "sclk_hdmiphy", -}; - -static struct clk exynos5_clk_sclk_usbphy = { - .name = "sclk_usbphy", - .rate = 48000000, -}; - -static int exynos5_clksrc_mask_top_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_TOP, clk, enable); -} - -static int exynos5_clksrc_mask_disp1_0_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_DISP1_0, clk, enable); -} - -static int exynos5_clksrc_mask_fsys_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_FSYS, clk, enable); -} - -static int exynos5_clksrc_mask_gscl_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_GSCL, clk, enable); -} - -static int exynos5_clksrc_mask_peric0_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_PERIC0, clk, enable); -} - -static int exynos5_clksrc_mask_peric1_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_PERIC1, clk, enable); -} - -static int exynos5_clk_ip_acp_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS5_CLKGATE_IP_ACP, clk, enable); -} - -static int exynos5_clk_ip_core_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS5_CLKGATE_IP_CORE, clk, enable); -} - -static int exynos5_clk_ip_disp1_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS5_CLKGATE_IP_DISP1, clk, enable); -} - -static int exynos5_clk_ip_fsys_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS5_CLKGATE_IP_FSYS, clk, enable); -} - -static int exynos5_clk_block_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS5_CLKGATE_BLOCK, clk, enable); -} - -static int exynos5_clk_ip_gen_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS5_CLKGATE_IP_GEN, clk, enable); -} - -static int exynos5_clk_ip_mfc_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS5_CLKGATE_IP_MFC, clk, enable); -} - -static int exynos5_clk_ip_peric_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS5_CLKGATE_IP_PERIC, clk, enable); -} - -static int exynos5_clk_ip_peris_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS5_CLKGATE_IP_PERIS, clk, enable); -} - -static int exynos5_clk_ip_gscl_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS5_CLKGATE_IP_GSCL, clk, enable); -} - -static int exynos5_clk_ip_isp0_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS5_CLKGATE_IP_ISP0, clk, enable); -} - -static int exynos5_clk_ip_isp1_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS5_CLKGATE_IP_ISP1, clk, enable); -} - -static int exynos5_clk_hdmiphy_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_HDMI_PHY_CONTROL, clk, enable); -} - -/* Core list of CMU_CPU side */ - -static struct clksrc_clk exynos5_clk_mout_apll = { - .clk = { - .name = "mout_apll", - }, - .sources = &clk_src_apll, - .reg_src = { .reg = EXYNOS5_CLKSRC_CPU, .shift = 0, .size = 1 }, -}; - -static struct clksrc_clk exynos5_clk_sclk_apll = { - .clk = { - .name = "sclk_apll", - .parent = &exynos5_clk_mout_apll.clk, - }, - .reg_div = { .reg = EXYNOS5_CLKDIV_CPU0, .shift = 24, .size = 3 }, -}; - -static struct clksrc_clk exynos5_clk_mout_bpll_fout = { - .clk = { - .name = "mout_bpll_fout", - }, - .sources = &clk_src_bpll_fout, - .reg_src = { .reg = EXYNOS5_PLL_DIV2_SEL, .shift = 0, .size = 1 }, -}; - -static struct clk *exynos5_clk_src_bpll_list[] = { - [0] = &clk_fin_bpll, - [1] = &exynos5_clk_mout_bpll_fout.clk, -}; - -static struct clksrc_sources exynos5_clk_src_bpll = { - .sources = exynos5_clk_src_bpll_list, - .nr_sources = ARRAY_SIZE(exynos5_clk_src_bpll_list), -}; - -static struct clksrc_clk exynos5_clk_mout_bpll = { - .clk = { - .name = "mout_bpll", - }, - .sources = &exynos5_clk_src_bpll, - .reg_src = { .reg = EXYNOS5_CLKSRC_CDREX, .shift = 0, .size = 1 }, -}; - -static struct clk *exynos5_clk_src_bpll_user_list[] = { - [0] = &clk_fin_mpll, - [1] = &exynos5_clk_mout_bpll.clk, -}; - -static struct clksrc_sources exynos5_clk_src_bpll_user = { - .sources = exynos5_clk_src_bpll_user_list, - .nr_sources = ARRAY_SIZE(exynos5_clk_src_bpll_user_list), -}; - -static struct clksrc_clk exynos5_clk_mout_bpll_user = { - .clk = { - .name = "mout_bpll_user", - }, - .sources = &exynos5_clk_src_bpll_user, - .reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 24, .size = 1 }, -}; - -static struct clksrc_clk exynos5_clk_mout_cpll = { - .clk = { - .name = "mout_cpll", - }, - .sources = &clk_src_cpll, - .reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 8, .size = 1 }, -}; - -static struct clksrc_clk exynos5_clk_mout_epll = { - .clk = { - .name = "mout_epll", - }, - .sources = &clk_src_epll, - .reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 12, .size = 1 }, -}; - -static struct clksrc_clk exynos5_clk_mout_mpll_fout = { - .clk = { - .name = "mout_mpll_fout", - }, - .sources = &clk_src_mpll_fout, - .reg_src = { .reg = EXYNOS5_PLL_DIV2_SEL, .shift = 4, .size = 1 }, -}; - -static struct clk *exynos5_clk_src_mpll_list[] = { - [0] = &clk_fin_mpll, - [1] = &exynos5_clk_mout_mpll_fout.clk, -}; - -static struct clksrc_sources exynos5_clk_src_mpll = { - .sources = exynos5_clk_src_mpll_list, - .nr_sources = ARRAY_SIZE(exynos5_clk_src_mpll_list), -}; - -static struct clksrc_clk exynos5_clk_mout_mpll = { - .clk = { - .name = "mout_mpll", - }, - .sources = &exynos5_clk_src_mpll, - .reg_src = { .reg = EXYNOS5_CLKSRC_CORE1, .shift = 8, .size = 1 }, -}; - -static struct clk *exynos_clkset_vpllsrc_list[] = { - [0] = &clk_fin_vpll, - [1] = &exynos5_clk_sclk_hdmi27m, -}; - -static struct clksrc_sources exynos5_clkset_vpllsrc = { - .sources = exynos_clkset_vpllsrc_list, - .nr_sources = ARRAY_SIZE(exynos_clkset_vpllsrc_list), -}; - -static struct clksrc_clk exynos5_clk_vpllsrc = { - .clk = { - .name = "vpll_src", - .enable = exynos5_clksrc_mask_top_ctrl, - .ctrlbit = (1 << 0), - }, - .sources = &exynos5_clkset_vpllsrc, - .reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 0, .size = 1 }, -}; - -static struct clk *exynos5_clkset_sclk_vpll_list[] = { - [0] = &exynos5_clk_vpllsrc.clk, - [1] = &clk_fout_vpll, -}; - -static struct clksrc_sources exynos5_clkset_sclk_vpll = { - .sources = exynos5_clkset_sclk_vpll_list, - .nr_sources = ARRAY_SIZE(exynos5_clkset_sclk_vpll_list), -}; - -static struct clksrc_clk exynos5_clk_sclk_vpll = { - .clk = { - .name = "sclk_vpll", - }, - .sources = &exynos5_clkset_sclk_vpll, - .reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 16, .size = 1 }, -}; - -static struct clksrc_clk exynos5_clk_sclk_pixel = { - .clk = { - .name = "sclk_pixel", - .parent = &exynos5_clk_sclk_vpll.clk, - }, - .reg_div = { .reg = EXYNOS5_CLKDIV_DISP1_0, .shift = 28, .size = 4 }, -}; - -static struct clk *exynos5_clkset_sclk_hdmi_list[] = { - [0] = &exynos5_clk_sclk_pixel.clk, - [1] = &exynos5_clk_sclk_hdmiphy, -}; - -static struct clksrc_sources exynos5_clkset_sclk_hdmi = { - .sources = exynos5_clkset_sclk_hdmi_list, - .nr_sources = ARRAY_SIZE(exynos5_clkset_sclk_hdmi_list), -}; - -static struct clksrc_clk exynos5_clk_sclk_hdmi = { - .clk = { - .name = "sclk_hdmi", - .enable = exynos5_clksrc_mask_disp1_0_ctrl, - .ctrlbit = (1 << 20), - }, - .sources = &exynos5_clkset_sclk_hdmi, - .reg_src = { .reg = EXYNOS5_CLKSRC_DISP1_0, .shift = 20, .size = 1 }, -}; - -static struct clksrc_clk *exynos5_sclk_tv[] = { - &exynos5_clk_sclk_pixel, - &exynos5_clk_sclk_hdmi, -}; - -static struct clk *exynos5_clk_src_mpll_user_list[] = { - [0] = &clk_fin_mpll, - [1] = &exynos5_clk_mout_mpll.clk, -}; - -static struct clksrc_sources exynos5_clk_src_mpll_user = { - .sources = exynos5_clk_src_mpll_user_list, - .nr_sources = ARRAY_SIZE(exynos5_clk_src_mpll_user_list), -}; - -static struct clksrc_clk exynos5_clk_mout_mpll_user = { - .clk = { - .name = "mout_mpll_user", - }, - .sources = &exynos5_clk_src_mpll_user, - .reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 20, .size = 1 }, -}; - -static struct clk *exynos5_clkset_mout_cpu_list[] = { - [0] = &exynos5_clk_mout_apll.clk, - [1] = &exynos5_clk_mout_mpll.clk, -}; - -static struct clksrc_sources exynos5_clkset_mout_cpu = { - .sources = exynos5_clkset_mout_cpu_list, - .nr_sources = ARRAY_SIZE(exynos5_clkset_mout_cpu_list), -}; - -static struct clksrc_clk exynos5_clk_mout_cpu = { - .clk = { - .name = "mout_cpu", - }, - .sources = &exynos5_clkset_mout_cpu, - .reg_src = { .reg = EXYNOS5_CLKSRC_CPU, .shift = 16, .size = 1 }, -}; - -static struct clksrc_clk exynos5_clk_dout_armclk = { - .clk = { - .name = "dout_armclk", - .parent = &exynos5_clk_mout_cpu.clk, - }, - .reg_div = { .reg = EXYNOS5_CLKDIV_CPU0, .shift = 0, .size = 3 }, -}; - -static struct clksrc_clk exynos5_clk_dout_arm2clk = { - .clk = { - .name = "dout_arm2clk", - .parent = &exynos5_clk_dout_armclk.clk, - }, - .reg_div = { .reg = EXYNOS5_CLKDIV_CPU0, .shift = 28, .size = 3 }, -}; - -static struct clk exynos5_clk_armclk = { - .name = "armclk", - .parent = &exynos5_clk_dout_arm2clk.clk, -}; - -/* Core list of CMU_CDREX side */ - -static struct clk *exynos5_clkset_cdrex_list[] = { - [0] = &exynos5_clk_mout_mpll.clk, - [1] = &exynos5_clk_mout_bpll.clk, -}; - -static struct clksrc_sources exynos5_clkset_cdrex = { - .sources = exynos5_clkset_cdrex_list, - .nr_sources = ARRAY_SIZE(exynos5_clkset_cdrex_list), -}; - -static struct clksrc_clk exynos5_clk_cdrex = { - .clk = { - .name = "clk_cdrex", - }, - .sources = &exynos5_clkset_cdrex, - .reg_src = { .reg = EXYNOS5_CLKSRC_CDREX, .shift = 4, .size = 1 }, - .reg_div = { .reg = EXYNOS5_CLKDIV_CDREX, .shift = 16, .size = 3 }, -}; - -static struct clksrc_clk exynos5_clk_aclk_acp = { - .clk = { - .name = "aclk_acp", - .parent = &exynos5_clk_mout_mpll.clk, - }, - .reg_div = { .reg = EXYNOS5_CLKDIV_ACP, .shift = 0, .size = 3 }, -}; - -static struct clksrc_clk exynos5_clk_pclk_acp = { - .clk = { - .name = "pclk_acp", - .parent = &exynos5_clk_aclk_acp.clk, - }, - .reg_div = { .reg = EXYNOS5_CLKDIV_ACP, .shift = 4, .size = 3 }, -}; - -/* Core list of CMU_TOP side */ - -static struct clk *exynos5_clkset_aclk_top_list[] = { - [0] = &exynos5_clk_mout_mpll_user.clk, - [1] = &exynos5_clk_mout_bpll_user.clk, -}; - -static struct clksrc_sources exynos5_clkset_aclk = { - .sources = exynos5_clkset_aclk_top_list, - .nr_sources = ARRAY_SIZE(exynos5_clkset_aclk_top_list), -}; - -static struct clksrc_clk exynos5_clk_aclk_400 = { - .clk = { - .name = "aclk_400", - }, - .sources = &exynos5_clkset_aclk, - .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 20, .size = 1 }, - .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 24, .size = 3 }, -}; - -static struct clk *exynos5_clkset_aclk_333_166_list[] = { - [0] = &exynos5_clk_mout_cpll.clk, - [1] = &exynos5_clk_mout_mpll_user.clk, -}; - -static struct clksrc_sources exynos5_clkset_aclk_333_166 = { - .sources = exynos5_clkset_aclk_333_166_list, - .nr_sources = ARRAY_SIZE(exynos5_clkset_aclk_333_166_list), -}; - -static struct clksrc_clk exynos5_clk_aclk_333 = { - .clk = { - .name = "aclk_333", - }, - .sources = &exynos5_clkset_aclk_333_166, - .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 16, .size = 1 }, - .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 20, .size = 3 }, -}; - -static struct clksrc_clk exynos5_clk_aclk_166 = { - .clk = { - .name = "aclk_166", - }, - .sources = &exynos5_clkset_aclk_333_166, - .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 8, .size = 1 }, - .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 8, .size = 3 }, -}; - -static struct clksrc_clk exynos5_clk_aclk_266 = { - .clk = { - .name = "aclk_266", - .parent = &exynos5_clk_mout_mpll_user.clk, - }, - .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 16, .size = 3 }, -}; - -static struct clksrc_clk exynos5_clk_aclk_200 = { - .clk = { - .name = "aclk_200", - }, - .sources = &exynos5_clkset_aclk, - .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 12, .size = 1 }, - .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 12, .size = 3 }, -}; - -static struct clksrc_clk exynos5_clk_aclk_66_pre = { - .clk = { - .name = "aclk_66_pre", - .parent = &exynos5_clk_mout_mpll_user.clk, - }, - .reg_div = { .reg = EXYNOS5_CLKDIV_TOP1, .shift = 24, .size = 3 }, -}; - -static struct clksrc_clk exynos5_clk_aclk_66 = { - .clk = { - .name = "aclk_66", - .parent = &exynos5_clk_aclk_66_pre.clk, - }, - .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 0, .size = 3 }, -}; - -static struct clksrc_clk exynos5_clk_mout_aclk_300_gscl_mid = { - .clk = { - .name = "mout_aclk_300_gscl_mid", - }, - .sources = &exynos5_clkset_aclk, - .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 24, .size = 1 }, -}; - -static struct clk *exynos5_clkset_aclk_300_mid1_list[] = { - [0] = &exynos5_clk_sclk_vpll.clk, - [1] = &exynos5_clk_mout_cpll.clk, -}; - -static struct clksrc_sources exynos5_clkset_aclk_300_gscl_mid1 = { - .sources = exynos5_clkset_aclk_300_mid1_list, - .nr_sources = ARRAY_SIZE(exynos5_clkset_aclk_300_mid1_list), -}; - -static struct clksrc_clk exynos5_clk_mout_aclk_300_gscl_mid1 = { - .clk = { - .name = "mout_aclk_300_gscl_mid1", - }, - .sources = &exynos5_clkset_aclk_300_gscl_mid1, - .reg_src = { .reg = EXYNOS5_CLKSRC_TOP1, .shift = 12, .size = 1 }, -}; - -static struct clk *exynos5_clkset_aclk_300_gscl_list[] = { - [0] = &exynos5_clk_mout_aclk_300_gscl_mid.clk, - [1] = &exynos5_clk_mout_aclk_300_gscl_mid1.clk, -}; - -static struct clksrc_sources exynos5_clkset_aclk_300_gscl = { - .sources = exynos5_clkset_aclk_300_gscl_list, - .nr_sources = ARRAY_SIZE(exynos5_clkset_aclk_300_gscl_list), -}; - -static struct clksrc_clk exynos5_clk_mout_aclk_300_gscl = { - .clk = { - .name = "mout_aclk_300_gscl", - }, - .sources = &exynos5_clkset_aclk_300_gscl, - .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 25, .size = 1 }, -}; - -static struct clk *exynos5_clk_src_gscl_300_list[] = { - [0] = &clk_ext_xtal_mux, - [1] = &exynos5_clk_mout_aclk_300_gscl.clk, -}; - -static struct clksrc_sources exynos5_clk_src_gscl_300 = { - .sources = exynos5_clk_src_gscl_300_list, - .nr_sources = ARRAY_SIZE(exynos5_clk_src_gscl_300_list), -}; - -static struct clksrc_clk exynos5_clk_aclk_300_gscl = { - .clk = { - .name = "aclk_300_gscl", - }, - .sources = &exynos5_clk_src_gscl_300, - .reg_src = { .reg = EXYNOS5_CLKSRC_TOP3, .shift = 10, .size = 1 }, -}; - -static struct clk exynos5_init_clocks_off[] = { - { - .name = "timers", - .parent = &exynos5_clk_aclk_66.clk, - .enable = exynos5_clk_ip_peric_ctrl, - .ctrlbit = (1 << 24), - }, { - .name = "tmu_apbif", - .parent = &exynos5_clk_aclk_66.clk, - .enable = exynos5_clk_ip_peris_ctrl, - .ctrlbit = (1 << 21), - }, { - .name = "rtc", - .parent = &exynos5_clk_aclk_66.clk, - .enable = exynos5_clk_ip_peris_ctrl, - .ctrlbit = (1 << 20), - }, { - .name = "watchdog", - .parent = &exynos5_clk_aclk_66.clk, - .enable = exynos5_clk_ip_peris_ctrl, - .ctrlbit = (1 << 19), - }, { - .name = "biu", /* bus interface unit clock */ - .devname = "dw_mmc.0", - .parent = &exynos5_clk_aclk_200.clk, - .enable = exynos5_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 12), - }, { - .name = "biu", - .devname = "dw_mmc.1", - .parent = &exynos5_clk_aclk_200.clk, - .enable = exynos5_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 13), - }, { - .name = "biu", - .devname = "dw_mmc.2", - .parent = &exynos5_clk_aclk_200.clk, - .enable = exynos5_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 14), - }, { - .name = "biu", - .devname = "dw_mmc.3", - .parent = &exynos5_clk_aclk_200.clk, - .enable = exynos5_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 15), - }, { - .name = "sata", - .devname = "exynos5-sata", - .parent = &exynos5_clk_aclk_200.clk, - .enable = exynos5_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 6), - }, { - .name = "sata-phy", - .devname = "exynos5-sata-phy", - .parent = &exynos5_clk_aclk_200.clk, - .enable = exynos5_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 24), - }, { - .name = "i2c", - .devname = "exynos5-sata-phy-i2c", - .parent = &exynos5_clk_aclk_200.clk, - .enable = exynos5_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 25), - }, { - .name = "mfc", - .devname = "s5p-mfc-v6", - .enable = exynos5_clk_ip_mfc_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "hdmi", - .devname = "exynos5-hdmi", - .enable = exynos5_clk_ip_disp1_ctrl, - .ctrlbit = (1 << 6), - }, { - .name = "hdmiphy", - .devname = "exynos5-hdmi", - .enable = exynos5_clk_hdmiphy_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "mixer", - .devname = "exynos5-mixer", - .enable = exynos5_clk_ip_disp1_ctrl, - .ctrlbit = (1 << 5), - }, { - .name = "dp", - .devname = "exynos-dp", - .enable = exynos5_clk_ip_disp1_ctrl, - .ctrlbit = (1 << 4), - }, { - .name = "jpeg", - .enable = exynos5_clk_ip_gen_ctrl, - .ctrlbit = (1 << 2), - }, { - .name = "dsim0", - .enable = exynos5_clk_ip_disp1_ctrl, - .ctrlbit = (1 << 3), - }, { - .name = "iis", - .devname = "samsung-i2s.1", - .enable = exynos5_clk_ip_peric_ctrl, - .ctrlbit = (1 << 20), - }, { - .name = "iis", - .devname = "samsung-i2s.2", - .enable = exynos5_clk_ip_peric_ctrl, - .ctrlbit = (1 << 21), - }, { - .name = "pcm", - .devname = "samsung-pcm.1", - .enable = exynos5_clk_ip_peric_ctrl, - .ctrlbit = (1 << 22), - }, { - .name = "pcm", - .devname = "samsung-pcm.2", - .enable = exynos5_clk_ip_peric_ctrl, - .ctrlbit = (1 << 23), - }, { - .name = "spdif", - .devname = "samsung-spdif", - .enable = exynos5_clk_ip_peric_ctrl, - .ctrlbit = (1 << 26), - }, { - .name = "ac97", - .devname = "samsung-ac97", - .enable = exynos5_clk_ip_peric_ctrl, - .ctrlbit = (1 << 27), - }, { - .name = "usbhost", - .enable = exynos5_clk_ip_fsys_ctrl , - .ctrlbit = (1 << 18), - }, { - .name = "usbotg", - .enable = exynos5_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 7), - }, { - .name = "nfcon", - .enable = exynos5_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 22), - }, { - .name = "iop", - .enable = exynos5_clk_ip_fsys_ctrl, - .ctrlbit = ((1 << 30) | (1 << 26) | (1 << 23)), - }, { - .name = "core_iop", - .enable = exynos5_clk_ip_core_ctrl, - .ctrlbit = ((1 << 21) | (1 << 3)), - }, { - .name = "mcu_iop", - .enable = exynos5_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "i2c", - .devname = "s3c2440-i2c.0", - .parent = &exynos5_clk_aclk_66.clk, - .enable = exynos5_clk_ip_peric_ctrl, - .ctrlbit = (1 << 6), - }, { - .name = "i2c", - .devname = "s3c2440-i2c.1", - .parent = &exynos5_clk_aclk_66.clk, - .enable = exynos5_clk_ip_peric_ctrl, - .ctrlbit = (1 << 7), - }, { - .name = "i2c", - .devname = "s3c2440-i2c.2", - .parent = &exynos5_clk_aclk_66.clk, - .enable = exynos5_clk_ip_peric_ctrl, - .ctrlbit = (1 << 8), - }, { - .name = "i2c", - .devname = "s3c2440-i2c.3", - .parent = &exynos5_clk_aclk_66.clk, - .enable = exynos5_clk_ip_peric_ctrl, - .ctrlbit = (1 << 9), - }, { - .name = "i2c", - .devname = "s3c2440-i2c.4", - .parent = &exynos5_clk_aclk_66.clk, - .enable = exynos5_clk_ip_peric_ctrl, - .ctrlbit = (1 << 10), - }, { - .name = "i2c", - .devname = "s3c2440-i2c.5", - .parent = &exynos5_clk_aclk_66.clk, - .enable = exynos5_clk_ip_peric_ctrl, - .ctrlbit = (1 << 11), - }, { - .name = "i2c", - .devname = "s3c2440-i2c.6", - .parent = &exynos5_clk_aclk_66.clk, - .enable = exynos5_clk_ip_peric_ctrl, - .ctrlbit = (1 << 12), - }, { - .name = "i2c", - .devname = "s3c2440-i2c.7", - .parent = &exynos5_clk_aclk_66.clk, - .enable = exynos5_clk_ip_peric_ctrl, - .ctrlbit = (1 << 13), - }, { - .name = "i2c", - .devname = "s3c2440-hdmiphy-i2c", - .parent = &exynos5_clk_aclk_66.clk, - .enable = exynos5_clk_ip_peric_ctrl, - .ctrlbit = (1 << 14), - }, { - .name = "spi", - .devname = "exynos4210-spi.0", - .parent = &exynos5_clk_aclk_66.clk, - .enable = exynos5_clk_ip_peric_ctrl, - .ctrlbit = (1 << 16), - }, { - .name = "spi", - .devname = "exynos4210-spi.1", - .parent = &exynos5_clk_aclk_66.clk, - .enable = exynos5_clk_ip_peric_ctrl, - .ctrlbit = (1 << 17), - }, { - .name = "spi", - .devname = "exynos4210-spi.2", - .parent = &exynos5_clk_aclk_66.clk, - .enable = exynos5_clk_ip_peric_ctrl, - .ctrlbit = (1 << 18), - }, { - .name = "gscl", - .devname = "exynos-gsc.0", - .enable = exynos5_clk_ip_gscl_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "gscl", - .devname = "exynos-gsc.1", - .enable = exynos5_clk_ip_gscl_ctrl, - .ctrlbit = (1 << 1), - }, { - .name = "gscl", - .devname = "exynos-gsc.2", - .enable = exynos5_clk_ip_gscl_ctrl, - .ctrlbit = (1 << 2), - }, { - .name = "gscl", - .devname = "exynos-gsc.3", - .enable = exynos5_clk_ip_gscl_ctrl, - .ctrlbit = (1 << 3), - }, { - .name = "sysmmu", - .devname = "exynos-sysmmu.1", - .enable = &exynos5_clk_ip_mfc_ctrl, - .ctrlbit = (1 << 1), - }, { - .name = "sysmmu", - .devname = "exynos-sysmmu.0", - .enable = &exynos5_clk_ip_mfc_ctrl, - .ctrlbit = (1 << 2), - }, { - .name = "sysmmu", - .devname = "exynos-sysmmu.2", - .enable = &exynos5_clk_ip_disp1_ctrl, - .ctrlbit = (1 << 9) - }, { - .name = "sysmmu", - .devname = "exynos-sysmmu.3", - .enable = &exynos5_clk_ip_gen_ctrl, - .ctrlbit = (1 << 7), - }, { - .name = "sysmmu", - .devname = "exynos-sysmmu.4", - .enable = &exynos5_clk_ip_gen_ctrl, - .ctrlbit = (1 << 6) - }, { - .name = "sysmmu", - .devname = "exynos-sysmmu.5", - .enable = &exynos5_clk_ip_gscl_ctrl, - .ctrlbit = (1 << 7), - }, { - .name = "sysmmu", - .devname = "exynos-sysmmu.6", - .enable = &exynos5_clk_ip_gscl_ctrl, - .ctrlbit = (1 << 8), - }, { - .name = "sysmmu", - .devname = "exynos-sysmmu.7", - .enable = &exynos5_clk_ip_gscl_ctrl, - .ctrlbit = (1 << 9), - }, { - .name = "sysmmu", - .devname = "exynos-sysmmu.8", - .enable = &exynos5_clk_ip_gscl_ctrl, - .ctrlbit = (1 << 10), - }, { - .name = "sysmmu", - .devname = "exynos-sysmmu.9", - .enable = &exynos5_clk_ip_isp0_ctrl, - .ctrlbit = (0x3F << 8), - }, { - .name = "sysmmu", - .devname = "exynos-sysmmu.10", - .enable = &exynos5_clk_ip_isp1_ctrl, - .ctrlbit = (0xF << 4), - }, { - .name = "sysmmu", - .devname = "exynos-sysmmu.11", - .enable = &exynos5_clk_ip_disp1_ctrl, - .ctrlbit = (1 << 8) - }, { - .name = "sysmmu", - .devname = "exynos-sysmmu.12", - .enable = &exynos5_clk_ip_gscl_ctrl, - .ctrlbit = (1 << 11), - }, { - .name = "sysmmu", - .devname = "exynos-sysmmu.13", - .enable = &exynos5_clk_ip_gscl_ctrl, - .ctrlbit = (1 << 12), - }, { - .name = "sysmmu", - .devname = "exynos-sysmmu.14", - .enable = &exynos5_clk_ip_acp_ctrl, - .ctrlbit = (1 << 7) - } -}; - -static struct clk exynos5_init_clocks_on[] = { - { - .name = "uart", - .devname = "s5pv210-uart.0", - .enable = exynos5_clk_ip_peric_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "uart", - .devname = "s5pv210-uart.1", - .enable = exynos5_clk_ip_peric_ctrl, - .ctrlbit = (1 << 1), - }, { - .name = "uart", - .devname = "s5pv210-uart.2", - .enable = exynos5_clk_ip_peric_ctrl, - .ctrlbit = (1 << 2), - }, { - .name = "uart", - .devname = "s5pv210-uart.3", - .enable = exynos5_clk_ip_peric_ctrl, - .ctrlbit = (1 << 3), - }, { - .name = "uart", - .devname = "s5pv210-uart.4", - .enable = exynos5_clk_ip_peric_ctrl, - .ctrlbit = (1 << 4), - }, { - .name = "uart", - .devname = "s5pv210-uart.5", - .enable = exynos5_clk_ip_peric_ctrl, - .ctrlbit = (1 << 5), - } -}; - -static struct clk exynos5_clk_pdma0 = { - .name = "dma", - .devname = "dma-pl330.0", - .enable = exynos5_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 1), -}; - -static struct clk exynos5_clk_pdma1 = { - .name = "dma", - .devname = "dma-pl330.1", - .enable = exynos5_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 2), -}; - -static struct clk exynos5_clk_mdma1 = { - .name = "dma", - .devname = "dma-pl330.2", - .enable = exynos5_clk_ip_gen_ctrl, - .ctrlbit = (1 << 4), -}; - -static struct clk exynos5_clk_fimd1 = { - .name = "fimd", - .devname = "exynos5-fb.1", - .enable = exynos5_clk_ip_disp1_ctrl, - .ctrlbit = (1 << 0), -}; - -static struct clk *exynos5_clkset_group_list[] = { - [0] = &clk_ext_xtal_mux, - [1] = NULL, - [2] = &exynos5_clk_sclk_hdmi24m, - [3] = &exynos5_clk_sclk_dptxphy, - [4] = &exynos5_clk_sclk_usbphy, - [5] = &exynos5_clk_sclk_hdmiphy, - [6] = &exynos5_clk_mout_mpll_user.clk, - [7] = &exynos5_clk_mout_epll.clk, - [8] = &exynos5_clk_sclk_vpll.clk, - [9] = &exynos5_clk_mout_cpll.clk, -}; - -static struct clksrc_sources exynos5_clkset_group = { - .sources = exynos5_clkset_group_list, - .nr_sources = ARRAY_SIZE(exynos5_clkset_group_list), -}; - -/* Possible clock sources for aclk_266_gscl_sub Mux */ -static struct clk *clk_src_gscl_266_list[] = { - [0] = &clk_ext_xtal_mux, - [1] = &exynos5_clk_aclk_266.clk, -}; - -static struct clksrc_sources clk_src_gscl_266 = { - .sources = clk_src_gscl_266_list, - .nr_sources = ARRAY_SIZE(clk_src_gscl_266_list), -}; - -static struct clksrc_clk exynos5_clk_dout_mmc0 = { - .clk = { - .name = "dout_mmc0", - }, - .sources = &exynos5_clkset_group, - .reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 0, .size = 4 }, - .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS1, .shift = 0, .size = 4 }, -}; - -static struct clksrc_clk exynos5_clk_dout_mmc1 = { - .clk = { - .name = "dout_mmc1", - }, - .sources = &exynos5_clkset_group, - .reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 4, .size = 4 }, - .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS1, .shift = 16, .size = 4 }, -}; - -static struct clksrc_clk exynos5_clk_dout_mmc2 = { - .clk = { - .name = "dout_mmc2", - }, - .sources = &exynos5_clkset_group, - .reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 8, .size = 4 }, - .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS2, .shift = 0, .size = 4 }, -}; - -static struct clksrc_clk exynos5_clk_dout_mmc3 = { - .clk = { - .name = "dout_mmc3", - }, - .sources = &exynos5_clkset_group, - .reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 12, .size = 4 }, - .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS2, .shift = 16, .size = 4 }, -}; - -static struct clksrc_clk exynos5_clk_dout_mmc4 = { - .clk = { - .name = "dout_mmc4", - }, - .sources = &exynos5_clkset_group, - .reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 16, .size = 4 }, - .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS3, .shift = 0, .size = 4 }, -}; - -static struct clksrc_clk exynos5_clk_sclk_uart0 = { - .clk = { - .name = "uclk1", - .devname = "exynos4210-uart.0", - .enable = exynos5_clksrc_mask_peric0_ctrl, - .ctrlbit = (1 << 0), - }, - .sources = &exynos5_clkset_group, - .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC0, .shift = 0, .size = 4 }, - .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC0, .shift = 0, .size = 4 }, -}; - -static struct clksrc_clk exynos5_clk_sclk_uart1 = { - .clk = { - .name = "uclk1", - .devname = "exynos4210-uart.1", - .enable = exynos5_clksrc_mask_peric0_ctrl, - .ctrlbit = (1 << 4), - }, - .sources = &exynos5_clkset_group, - .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC0, .shift = 4, .size = 4 }, - .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC0, .shift = 4, .size = 4 }, -}; - -static struct clksrc_clk exynos5_clk_sclk_uart2 = { - .clk = { - .name = "uclk1", - .devname = "exynos4210-uart.2", - .enable = exynos5_clksrc_mask_peric0_ctrl, - .ctrlbit = (1 << 8), - }, - .sources = &exynos5_clkset_group, - .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC0, .shift = 8, .size = 4 }, - .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC0, .shift = 8, .size = 4 }, -}; - -static struct clksrc_clk exynos5_clk_sclk_uart3 = { - .clk = { - .name = "uclk1", - .devname = "exynos4210-uart.3", - .enable = exynos5_clksrc_mask_peric0_ctrl, - .ctrlbit = (1 << 12), - }, - .sources = &exynos5_clkset_group, - .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC0, .shift = 12, .size = 4 }, - .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC0, .shift = 12, .size = 4 }, -}; - -static struct clksrc_clk exynos5_clk_sclk_mmc0 = { - .clk = { - .name = "ciu", /* card interface unit clock */ - .devname = "dw_mmc.0", - .parent = &exynos5_clk_dout_mmc0.clk, - .enable = exynos5_clksrc_mask_fsys_ctrl, - .ctrlbit = (1 << 0), - }, - .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS1, .shift = 8, .size = 8 }, -}; - -static struct clksrc_clk exynos5_clk_sclk_mmc1 = { - .clk = { - .name = "ciu", - .devname = "dw_mmc.1", - .parent = &exynos5_clk_dout_mmc1.clk, - .enable = exynos5_clksrc_mask_fsys_ctrl, - .ctrlbit = (1 << 4), - }, - .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS1, .shift = 24, .size = 8 }, -}; - -static struct clksrc_clk exynos5_clk_sclk_mmc2 = { - .clk = { - .name = "ciu", - .devname = "dw_mmc.2", - .parent = &exynos5_clk_dout_mmc2.clk, - .enable = exynos5_clksrc_mask_fsys_ctrl, - .ctrlbit = (1 << 8), - }, - .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS2, .shift = 8, .size = 8 }, -}; - -static struct clksrc_clk exynos5_clk_sclk_mmc3 = { - .clk = { - .name = "ciu", - .devname = "dw_mmc.3", - .parent = &exynos5_clk_dout_mmc3.clk, - .enable = exynos5_clksrc_mask_fsys_ctrl, - .ctrlbit = (1 << 12), - }, - .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS2, .shift = 24, .size = 8 }, -}; - -static struct clksrc_clk exynos5_clk_mdout_spi0 = { - .clk = { - .name = "mdout_spi", - .devname = "exynos4210-spi.0", - }, - .sources = &exynos5_clkset_group, - .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC1, .shift = 16, .size = 4 }, - .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC1, .shift = 0, .size = 4 }, -}; - -static struct clksrc_clk exynos5_clk_mdout_spi1 = { - .clk = { - .name = "mdout_spi", - .devname = "exynos4210-spi.1", - }, - .sources = &exynos5_clkset_group, - .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC1, .shift = 20, .size = 4 }, - .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC1, .shift = 16, .size = 4 }, -}; - -static struct clksrc_clk exynos5_clk_mdout_spi2 = { - .clk = { - .name = "mdout_spi", - .devname = "exynos4210-spi.2", - }, - .sources = &exynos5_clkset_group, - .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC1, .shift = 24, .size = 4 }, - .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC2, .shift = 0, .size = 4 }, -}; - -static struct clksrc_clk exynos5_clk_sclk_spi0 = { - .clk = { - .name = "sclk_spi", - .devname = "exynos4210-spi.0", - .parent = &exynos5_clk_mdout_spi0.clk, - .enable = exynos5_clksrc_mask_peric1_ctrl, - .ctrlbit = (1 << 16), - }, - .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC1, .shift = 8, .size = 8 }, -}; - -static struct clksrc_clk exynos5_clk_sclk_spi1 = { - .clk = { - .name = "sclk_spi", - .devname = "exynos4210-spi.1", - .parent = &exynos5_clk_mdout_spi1.clk, - .enable = exynos5_clksrc_mask_peric1_ctrl, - .ctrlbit = (1 << 20), - }, - .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC1, .shift = 24, .size = 8 }, -}; - -static struct clksrc_clk exynos5_clk_sclk_spi2 = { - .clk = { - .name = "sclk_spi", - .devname = "exynos4210-spi.2", - .parent = &exynos5_clk_mdout_spi2.clk, - .enable = exynos5_clksrc_mask_peric1_ctrl, - .ctrlbit = (1 << 24), - }, - .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC2, .shift = 8, .size = 8 }, -}; - -static struct clksrc_clk exynos5_clk_sclk_fimd1 = { - .clk = { - .name = "sclk_fimd", - .devname = "exynos5-fb.1", - .enable = exynos5_clksrc_mask_disp1_0_ctrl, - .ctrlbit = (1 << 0), - }, - .sources = &exynos5_clkset_group, - .reg_src = { .reg = EXYNOS5_CLKSRC_DISP1_0, .shift = 0, .size = 4 }, - .reg_div = { .reg = EXYNOS5_CLKDIV_DISP1_0, .shift = 0, .size = 4 }, -}; - -static struct clksrc_clk exynos5_clksrcs[] = { - { - .clk = { - .name = "aclk_266_gscl", - }, - .sources = &clk_src_gscl_266, - .reg_src = { .reg = EXYNOS5_CLKSRC_TOP3, .shift = 8, .size = 1 }, - }, { - .clk = { - .name = "sclk_g3d", - .devname = "mali-t604.0", - .enable = exynos5_clk_block_ctrl, - .ctrlbit = (1 << 1), - }, - .sources = &exynos5_clkset_aclk, - .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 20, .size = 1 }, - .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 24, .size = 3 }, - }, { - .clk = { - .name = "sclk_sata", - .devname = "exynos5-sata", - .enable = exynos5_clksrc_mask_fsys_ctrl, - .ctrlbit = (1 << 24), - }, - .sources = &exynos5_clkset_aclk, - .reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 24, .size = 1 }, - .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS0, .shift = 20, .size = 4 }, - }, { - .clk = { - .name = "sclk_gscl_wrap", - .devname = "s5p-mipi-csis.0", - .enable = exynos5_clksrc_mask_gscl_ctrl, - .ctrlbit = (1 << 24), - }, - .sources = &exynos5_clkset_group, - .reg_src = { .reg = EXYNOS5_CLKSRC_GSCL, .shift = 24, .size = 4 }, - .reg_div = { .reg = EXYNOS5_CLKDIV_GSCL, .shift = 24, .size = 4 }, - }, { - .clk = { - .name = "sclk_gscl_wrap", - .devname = "s5p-mipi-csis.1", - .enable = exynos5_clksrc_mask_gscl_ctrl, - .ctrlbit = (1 << 28), - }, - .sources = &exynos5_clkset_group, - .reg_src = { .reg = EXYNOS5_CLKSRC_GSCL, .shift = 28, .size = 4 }, - .reg_div = { .reg = EXYNOS5_CLKDIV_GSCL, .shift = 28, .size = 4 }, - }, { - .clk = { - .name = "sclk_cam0", - .enable = exynos5_clksrc_mask_gscl_ctrl, - .ctrlbit = (1 << 16), - }, - .sources = &exynos5_clkset_group, - .reg_src = { .reg = EXYNOS5_CLKSRC_GSCL, .shift = 16, .size = 4 }, - .reg_div = { .reg = EXYNOS5_CLKDIV_GSCL, .shift = 16, .size = 4 }, - }, { - .clk = { - .name = "sclk_cam1", - .enable = exynos5_clksrc_mask_gscl_ctrl, - .ctrlbit = (1 << 20), - }, - .sources = &exynos5_clkset_group, - .reg_src = { .reg = EXYNOS5_CLKSRC_GSCL, .shift = 20, .size = 4 }, - .reg_div = { .reg = EXYNOS5_CLKDIV_GSCL, .shift = 20, .size = 4 }, - }, { - .clk = { - .name = "sclk_jpeg", - .parent = &exynos5_clk_mout_cpll.clk, - }, - .reg_div = { .reg = EXYNOS5_CLKDIV_GEN, .shift = 4, .size = 3 }, - }, -}; - -/* Clock initialization code */ -static struct clksrc_clk *exynos5_sysclks[] = { - &exynos5_clk_mout_apll, - &exynos5_clk_sclk_apll, - &exynos5_clk_mout_bpll, - &exynos5_clk_mout_bpll_fout, - &exynos5_clk_mout_bpll_user, - &exynos5_clk_mout_cpll, - &exynos5_clk_mout_epll, - &exynos5_clk_mout_mpll, - &exynos5_clk_mout_mpll_fout, - &exynos5_clk_mout_mpll_user, - &exynos5_clk_vpllsrc, - &exynos5_clk_sclk_vpll, - &exynos5_clk_mout_cpu, - &exynos5_clk_dout_armclk, - &exynos5_clk_dout_arm2clk, - &exynos5_clk_cdrex, - &exynos5_clk_aclk_400, - &exynos5_clk_aclk_333, - &exynos5_clk_aclk_266, - &exynos5_clk_aclk_200, - &exynos5_clk_aclk_166, - &exynos5_clk_aclk_300_gscl, - &exynos5_clk_mout_aclk_300_gscl, - &exynos5_clk_mout_aclk_300_gscl_mid, - &exynos5_clk_mout_aclk_300_gscl_mid1, - &exynos5_clk_aclk_66_pre, - &exynos5_clk_aclk_66, - &exynos5_clk_dout_mmc0, - &exynos5_clk_dout_mmc1, - &exynos5_clk_dout_mmc2, - &exynos5_clk_dout_mmc3, - &exynos5_clk_dout_mmc4, - &exynos5_clk_aclk_acp, - &exynos5_clk_pclk_acp, - &exynos5_clk_sclk_spi0, - &exynos5_clk_sclk_spi1, - &exynos5_clk_sclk_spi2, - &exynos5_clk_mdout_spi0, - &exynos5_clk_mdout_spi1, - &exynos5_clk_mdout_spi2, - &exynos5_clk_sclk_fimd1, -}; - -static struct clk *exynos5_clk_cdev[] = { - &exynos5_clk_pdma0, - &exynos5_clk_pdma1, - &exynos5_clk_mdma1, - &exynos5_clk_fimd1, -}; - -static struct clksrc_clk *exynos5_clksrc_cdev[] = { - &exynos5_clk_sclk_uart0, - &exynos5_clk_sclk_uart1, - &exynos5_clk_sclk_uart2, - &exynos5_clk_sclk_uart3, - &exynos5_clk_sclk_mmc0, - &exynos5_clk_sclk_mmc1, - &exynos5_clk_sclk_mmc2, - &exynos5_clk_sclk_mmc3, -}; - -static struct clk_lookup exynos5_clk_lookup[] = { - CLKDEV_INIT("exynos4210-uart.0", "clk_uart_baud0", &exynos5_clk_sclk_uart0.clk), - CLKDEV_INIT("exynos4210-uart.1", "clk_uart_baud0", &exynos5_clk_sclk_uart1.clk), - CLKDEV_INIT("exynos4210-uart.2", "clk_uart_baud0", &exynos5_clk_sclk_uart2.clk), - CLKDEV_INIT("exynos4210-uart.3", "clk_uart_baud0", &exynos5_clk_sclk_uart3.clk), - CLKDEV_INIT("exynos4-sdhci.0", "mmc_busclk.2", &exynos5_clk_sclk_mmc0.clk), - CLKDEV_INIT("exynos4-sdhci.1", "mmc_busclk.2", &exynos5_clk_sclk_mmc1.clk), - CLKDEV_INIT("exynos4-sdhci.2", "mmc_busclk.2", &exynos5_clk_sclk_mmc2.clk), - CLKDEV_INIT("exynos4-sdhci.3", "mmc_busclk.2", &exynos5_clk_sclk_mmc3.clk), - CLKDEV_INIT("exynos4210-spi.0", "spi_busclk0", &exynos5_clk_sclk_spi0.clk), - CLKDEV_INIT("exynos4210-spi.1", "spi_busclk0", &exynos5_clk_sclk_spi1.clk), - CLKDEV_INIT("exynos4210-spi.2", "spi_busclk0", &exynos5_clk_sclk_spi2.clk), - CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos5_clk_pdma0), - CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos5_clk_pdma1), - CLKDEV_INIT("dma-pl330.2", "apb_pclk", &exynos5_clk_mdma1), - CLKDEV_INIT("exynos5-fb.1", "lcd", &exynos5_clk_fimd1), -}; - -static unsigned long exynos5_epll_get_rate(struct clk *clk) -{ - return clk->rate; -} - -static struct clk *exynos5_clks[] __initdata = { - &exynos5_clk_sclk_hdmi27m, - &exynos5_clk_sclk_hdmiphy, - &clk_fout_bpll, - &clk_fout_bpll_div2, - &clk_fout_cpll, - &clk_fout_mpll_div2, - &exynos5_clk_armclk, -}; - -static u32 epll_div[][6] = { - { 192000000, 0, 48, 3, 1, 0 }, - { 180000000, 0, 45, 3, 1, 0 }, - { 73728000, 1, 73, 3, 3, 47710 }, - { 67737600, 1, 90, 4, 3, 20762 }, - { 49152000, 0, 49, 3, 3, 9961 }, - { 45158400, 0, 45, 3, 3, 10381 }, - { 180633600, 0, 45, 3, 1, 10381 }, -}; - -static int exynos5_epll_set_rate(struct clk *clk, unsigned long rate) -{ - unsigned int epll_con, epll_con_k; - unsigned int i; - unsigned int tmp; - unsigned int epll_rate; - unsigned int locktime; - unsigned int lockcnt; - - /* Return if nothing changed */ - if (clk->rate == rate) - return 0; - - if (clk->parent) - epll_rate = clk_get_rate(clk->parent); - else - epll_rate = clk_ext_xtal_mux.rate; - - if (epll_rate != 24000000) { - pr_err("Invalid Clock : recommended clock is 24MHz.\n"); - return -EINVAL; - } - - epll_con = __raw_readl(EXYNOS5_EPLL_CON0); - epll_con &= ~(0x1 << 27 | \ - PLL46XX_MDIV_MASK << PLL46XX_MDIV_SHIFT | \ - PLL46XX_PDIV_MASK << PLL46XX_PDIV_SHIFT | \ - PLL46XX_SDIV_MASK << PLL46XX_SDIV_SHIFT); - - for (i = 0; i < ARRAY_SIZE(epll_div); i++) { - if (epll_div[i][0] == rate) { - epll_con_k = epll_div[i][5] << 0; - epll_con |= epll_div[i][1] << 27; - epll_con |= epll_div[i][2] << PLL46XX_MDIV_SHIFT; - epll_con |= epll_div[i][3] << PLL46XX_PDIV_SHIFT; - epll_con |= epll_div[i][4] << PLL46XX_SDIV_SHIFT; - break; - } - } - - if (i == ARRAY_SIZE(epll_div)) { - printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n", - __func__); - return -EINVAL; - } - - epll_rate /= 1000000; - - /* 3000 max_cycls : specification data */ - locktime = 3000 / epll_rate * epll_div[i][3]; - lockcnt = locktime * 10000 / (10000 / epll_rate); - - __raw_writel(lockcnt, EXYNOS5_EPLL_LOCK); - - __raw_writel(epll_con, EXYNOS5_EPLL_CON0); - __raw_writel(epll_con_k, EXYNOS5_EPLL_CON1); - - do { - tmp = __raw_readl(EXYNOS5_EPLL_CON0); - } while (!(tmp & 0x1 << EXYNOS5_EPLLCON0_LOCKED_SHIFT)); - - clk->rate = rate; - - return 0; -} - -static struct clk_ops exynos5_epll_ops = { - .get_rate = exynos5_epll_get_rate, - .set_rate = exynos5_epll_set_rate, -}; - -static int xtal_rate; - -static unsigned long exynos5_fout_apll_get_rate(struct clk *clk) -{ - return s5p_get_pll35xx(xtal_rate, __raw_readl(EXYNOS5_APLL_CON0)); -} - -static struct clk_ops exynos5_fout_apll_ops = { - .get_rate = exynos5_fout_apll_get_rate, -}; - -#ifdef CONFIG_PM -static int exynos5_clock_suspend(void) -{ - s3c_pm_do_save(exynos5_clock_save, ARRAY_SIZE(exynos5_clock_save)); - - return 0; -} - -static void exynos5_clock_resume(void) -{ - s3c_pm_do_restore_core(exynos5_clock_save, ARRAY_SIZE(exynos5_clock_save)); -} -#else -#define exynos5_clock_suspend NULL -#define exynos5_clock_resume NULL -#endif - -static struct syscore_ops exynos5_clock_syscore_ops = { - .suspend = exynos5_clock_suspend, - .resume = exynos5_clock_resume, -}; - -void __init_or_cpufreq exynos5_setup_clocks(void) -{ - struct clk *xtal_clk; - unsigned long apll; - unsigned long bpll; - unsigned long cpll; - unsigned long mpll; - unsigned long epll; - unsigned long vpll; - unsigned long vpllsrc; - unsigned long xtal; - unsigned long armclk; - unsigned long mout_cdrex; - unsigned long aclk_400; - unsigned long aclk_333; - unsigned long aclk_266; - unsigned long aclk_200; - unsigned long aclk_166; - unsigned long aclk_66; - unsigned int ptr; - - printk(KERN_DEBUG "%s: registering clocks\n", __func__); - - xtal_clk = clk_get(NULL, "xtal"); - BUG_ON(IS_ERR(xtal_clk)); - - xtal = clk_get_rate(xtal_clk); - - xtal_rate = xtal; - - clk_put(xtal_clk); - - printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal); - - apll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS5_APLL_CON0)); - bpll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS5_BPLL_CON0)); - cpll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS5_CPLL_CON0)); - mpll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS5_MPLL_CON0)); - epll = s5p_get_pll36xx(xtal, __raw_readl(EXYNOS5_EPLL_CON0), - __raw_readl(EXYNOS5_EPLL_CON1)); - - vpllsrc = clk_get_rate(&exynos5_clk_vpllsrc.clk); - vpll = s5p_get_pll36xx(vpllsrc, __raw_readl(EXYNOS5_VPLL_CON0), - __raw_readl(EXYNOS5_VPLL_CON1)); - - clk_fout_apll.ops = &exynos5_fout_apll_ops; - clk_fout_bpll.rate = bpll; - clk_fout_bpll_div2.rate = bpll >> 1; - clk_fout_cpll.rate = cpll; - clk_fout_mpll.rate = mpll; - clk_fout_mpll_div2.rate = mpll >> 1; - clk_fout_epll.rate = epll; - clk_fout_vpll.rate = vpll; - - printk(KERN_INFO "EXYNOS5: PLL settings, A=%ld, B=%ld, C=%ld\n" - "M=%ld, E=%ld V=%ld", - apll, bpll, cpll, mpll, epll, vpll); - - armclk = clk_get_rate(&exynos5_clk_armclk); - mout_cdrex = clk_get_rate(&exynos5_clk_cdrex.clk); - - aclk_400 = clk_get_rate(&exynos5_clk_aclk_400.clk); - aclk_333 = clk_get_rate(&exynos5_clk_aclk_333.clk); - aclk_266 = clk_get_rate(&exynos5_clk_aclk_266.clk); - aclk_200 = clk_get_rate(&exynos5_clk_aclk_200.clk); - aclk_166 = clk_get_rate(&exynos5_clk_aclk_166.clk); - aclk_66 = clk_get_rate(&exynos5_clk_aclk_66.clk); - - printk(KERN_INFO "EXYNOS5: ARMCLK=%ld, CDREX=%ld, ACLK400=%ld\n" - "ACLK333=%ld, ACLK266=%ld, ACLK200=%ld\n" - "ACLK166=%ld, ACLK66=%ld\n", - armclk, mout_cdrex, aclk_400, - aclk_333, aclk_266, aclk_200, - aclk_166, aclk_66); - - - clk_fout_epll.ops = &exynos5_epll_ops; - - if (clk_set_parent(&exynos5_clk_mout_epll.clk, &clk_fout_epll)) - printk(KERN_ERR "Unable to set parent %s of clock %s.\n", - clk_fout_epll.name, exynos5_clk_mout_epll.clk.name); - - clk_set_rate(&exynos5_clk_sclk_apll.clk, 100000000); - clk_set_rate(&exynos5_clk_aclk_266.clk, 300000000); - - clk_set_rate(&exynos5_clk_aclk_acp.clk, 267000000); - clk_set_rate(&exynos5_clk_pclk_acp.clk, 134000000); - - for (ptr = 0; ptr < ARRAY_SIZE(exynos5_clksrcs); ptr++) - s3c_set_clksrc(&exynos5_clksrcs[ptr], true); -} - -void __init exynos5_register_clocks(void) -{ - int ptr; - - s3c24xx_register_clocks(exynos5_clks, ARRAY_SIZE(exynos5_clks)); - - for (ptr = 0; ptr < ARRAY_SIZE(exynos5_sysclks); ptr++) - s3c_register_clksrc(exynos5_sysclks[ptr], 1); - - for (ptr = 0; ptr < ARRAY_SIZE(exynos5_sclk_tv); ptr++) - s3c_register_clksrc(exynos5_sclk_tv[ptr], 1); - - for (ptr = 0; ptr < ARRAY_SIZE(exynos5_clksrc_cdev); ptr++) - s3c_register_clksrc(exynos5_clksrc_cdev[ptr], 1); - - s3c_register_clksrc(exynos5_clksrcs, ARRAY_SIZE(exynos5_clksrcs)); - s3c_register_clocks(exynos5_init_clocks_on, ARRAY_SIZE(exynos5_init_clocks_on)); - - s3c24xx_register_clocks(exynos5_clk_cdev, ARRAY_SIZE(exynos5_clk_cdev)); - for (ptr = 0; ptr < ARRAY_SIZE(exynos5_clk_cdev); ptr++) - s3c_disable_clocks(exynos5_clk_cdev[ptr], 1); - - s3c_register_clocks(exynos5_init_clocks_off, ARRAY_SIZE(exynos5_init_clocks_off)); - s3c_disable_clocks(exynos5_init_clocks_off, ARRAY_SIZE(exynos5_init_clocks_off)); - clkdev_add_table(exynos5_clk_lookup, ARRAY_SIZE(exynos5_clk_lookup)); - - register_syscore_ops(&exynos5_clock_syscore_ops); - s3c_pwmclk_init(); -} diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index d63d399c7bae..745e304ad0de 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -23,9 +23,11 @@ #include <linux/of_irq.h> #include <linux/export.h> #include <linux/irqdomain.h> -#include <linux/irqchip.h> #include <linux/of_address.h> +#include <linux/clocksource.h> +#include <linux/clk-provider.h> #include <linux/irqchip/arm-gic.h> +#include <linux/irqchip/chained_irq.h> #include <asm/proc-fns.h> #include <asm/exception.h> @@ -37,9 +39,9 @@ #include <mach/regs-irq.h> #include <mach/regs-pmu.h> #include <mach/regs-gpio.h> +#include <mach/irqs.h> #include <plat/cpu.h> -#include <plat/clock.h> #include <plat/devs.h> #include <plat/pm.h> #include <plat/sdhci.h> @@ -65,17 +67,16 @@ static const char name_exynos5440[] = "EXYNOS5440"; static void exynos4_map_io(void); static void exynos5_map_io(void); static void exynos5440_map_io(void); -static void exynos4_init_clocks(int xtal); -static void exynos5_init_clocks(int xtal); static void exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no); static int exynos_init(void); +unsigned long xxti_f = 0, xusbxti_f = 0; + static struct cpu_table cpu_ids[] __initdata = { { .idcode = EXYNOS4210_CPU_ID, .idmask = EXYNOS4_CPU_MASK, .map_io = exynos4_map_io, - .init_clocks = exynos4_init_clocks, .init_uarts = exynos4_init_uarts, .init = exynos_init, .name = name_exynos4210, @@ -83,7 +84,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = EXYNOS4212_CPU_ID, .idmask = EXYNOS4_CPU_MASK, .map_io = exynos4_map_io, - .init_clocks = exynos4_init_clocks, .init_uarts = exynos4_init_uarts, .init = exynos_init, .name = name_exynos4212, @@ -91,7 +91,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = EXYNOS4412_CPU_ID, .idmask = EXYNOS4_CPU_MASK, .map_io = exynos4_map_io, - .init_clocks = exynos4_init_clocks, .init_uarts = exynos4_init_uarts, .init = exynos_init, .name = name_exynos4412, @@ -99,7 +98,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = EXYNOS5250_SOC_ID, .idmask = EXYNOS5_SOC_MASK, .map_io = exynos5_map_io, - .init_clocks = exynos5_init_clocks, .init = exynos_init, .name = name_exynos5250, }, { @@ -122,17 +120,6 @@ static struct map_desc exynos_iodesc[] __initdata = { }, }; -#ifdef CONFIG_ARCH_EXYNOS5 -static struct map_desc exynos5440_iodesc[] __initdata = { - { - .virtual = (unsigned long)S5P_VA_CHIPID, - .pfn = __phys_to_pfn(EXYNOS5440_PA_CHIPID), - .length = SZ_4K, - .type = MT_DEVICE, - }, -}; -#endif - static struct map_desc exynos4_iodesc[] __initdata = { { .virtual = (unsigned long)S3C_VA_SYS, @@ -235,6 +222,33 @@ static struct map_desc exynos4_iodesc1[] __initdata = { }, }; +static struct map_desc exynos4210_iodesc[] __initdata = { + { + .virtual = (unsigned long)S5P_VA_SYSRAM_NS, + .pfn = __phys_to_pfn(EXYNOS4210_PA_SYSRAM_NS), + .length = SZ_4K, + .type = MT_DEVICE, + }, +}; + +static struct map_desc exynos4x12_iodesc[] __initdata = { + { + .virtual = (unsigned long)S5P_VA_SYSRAM_NS, + .pfn = __phys_to_pfn(EXYNOS4x12_PA_SYSRAM_NS), + .length = SZ_4K, + .type = MT_DEVICE, + }, +}; + +static struct map_desc exynos5250_iodesc[] __initdata = { + { + .virtual = (unsigned long)S5P_VA_SYSRAM_NS, + .pfn = __phys_to_pfn(EXYNOS5250_PA_SYSRAM_NS), + .length = SZ_4K, + .type = MT_DEVICE, + }, +}; + static struct map_desc exynos5_iodesc[] __initdata = { { .virtual = (unsigned long)S3C_VA_SYS, @@ -257,11 +271,6 @@ static struct map_desc exynos5_iodesc[] __initdata = { .length = SZ_4K, .type = MT_DEVICE, }, { - .virtual = (unsigned long)S5P_VA_SYSTIMER, - .pfn = __phys_to_pfn(EXYNOS5_PA_SYSTIMER), - .length = SZ_4K, - .type = MT_DEVICE, - }, { .virtual = (unsigned long)S5P_VA_SYSRAM, .pfn = __phys_to_pfn(EXYNOS5_PA_SYSRAM), .length = SZ_4K, @@ -328,6 +337,31 @@ void __init exynos_init_late(void) exynos_pm_late_initcall(); } +#ifdef CONFIG_OF +int __init exynos_fdt_map_chipid(unsigned long node, const char *uname, + int depth, void *data) +{ + struct map_desc iodesc; + __be32 *reg; + unsigned long len; + + if (!of_flat_dt_is_compatible(node, "samsung,exynos4210-chipid") && + !of_flat_dt_is_compatible(node, "samsung,exynos5440-clock")) + return 0; + + reg = of_get_flat_dt_prop(node, "reg", &len); + if (reg == NULL || len != (sizeof(unsigned long) * 2)) + return 0; + + iodesc.pfn = __phys_to_pfn(be32_to_cpu(reg[0])); + iodesc.length = be32_to_cpu(reg[1]) - 1; + iodesc.virtual = (unsigned long)S5P_VA_CHIPID; + iodesc.type = MT_DEVICE; + iotable_init(&iodesc, 1); + return 1; +} +#endif + /* * exynos_map_io * @@ -336,19 +370,12 @@ void __init exynos_init_late(void) void __init exynos_init_io(struct map_desc *mach_desc, int size) { - struct map_desc *iodesc = exynos_iodesc; - int iodesc_sz = ARRAY_SIZE(exynos_iodesc); -#if defined(CONFIG_OF) && defined(CONFIG_ARCH_EXYNOS5) - unsigned long root = of_get_flat_dt_root(); - - /* initialize the io descriptors we need for initialization */ - if (of_flat_dt_is_compatible(root, "samsung,exynos5440")) { - iodesc = exynos5440_iodesc; - iodesc_sz = ARRAY_SIZE(exynos5440_iodesc); - } +#ifdef CONFIG_OF + if (initial_boot_params) + of_scan_flat_dt(exynos_fdt_map_chipid, NULL); + else #endif - - iotable_init(iodesc, iodesc_sz); + iotable_init(exynos_iodesc, ARRAY_SIZE(exynos_iodesc)); if (mach_desc) iotable_init(mach_desc, size); @@ -368,6 +395,11 @@ static void __init exynos4_map_io(void) else iotable_init(exynos4_iodesc1, ARRAY_SIZE(exynos4_iodesc1)); + if (soc_is_exynos4210()) + iotable_init(exynos4210_iodesc, ARRAY_SIZE(exynos4210_iodesc)); + if (soc_is_exynos4212() || soc_is_exynos4412()) + iotable_init(exynos4x12_iodesc, ARRAY_SIZE(exynos4x12_iodesc)); + /* initialize device information early */ exynos4_default_sdhci0(); exynos4_default_sdhci1(); @@ -400,22 +432,9 @@ static void __init exynos4_map_io(void) static void __init exynos5_map_io(void) { iotable_init(exynos5_iodesc, ARRAY_SIZE(exynos5_iodesc)); -} -static void __init exynos4_init_clocks(int xtal) -{ - printk(KERN_DEBUG "%s: initializing clocks\n", __func__); - - s3c24xx_register_baseclocks(xtal); - s5p_register_clocks(xtal); - - if (soc_is_exynos4210()) - exynos4210_register_clocks(); - else if (soc_is_exynos4212() || soc_is_exynos4412()) - exynos4212_register_clocks(); - - exynos4_register_clocks(); - exynos4_setup_clocks(); + if (soc_is_exynos5250()) + iotable_init(exynos5250_iodesc, ARRAY_SIZE(exynos5250_iodesc)); } static void __init exynos5440_map_io(void) @@ -423,24 +442,36 @@ static void __init exynos5440_map_io(void) iotable_init(exynos5440_iodesc0, ARRAY_SIZE(exynos5440_iodesc0)); } -static void __init exynos5_init_clocks(int xtal) +void __init exynos_init_time(void) { - printk(KERN_DEBUG "%s: initializing clocks\n", __func__); - - /* EXYNOS5440 can support only common clock framework */ - - if (soc_is_exynos5440()) - return; - -#ifdef CONFIG_SOC_EXYNOS5250 - s3c24xx_register_baseclocks(xtal); - s5p_register_clocks(xtal); - - exynos5_register_clocks(); - exynos5_setup_clocks(); + if (of_have_populated_dt()) { +#ifdef CONFIG_OF + of_clk_init(NULL); + clocksource_of_init(); +#endif + } else { + /* todo: remove after migrating legacy E4 platforms to dt */ +#ifdef CONFIG_ARCH_EXYNOS4 + exynos4_clk_init(NULL, !soc_is_exynos4210(), S5P_VA_CMU, readl(S5P_VA_CHIPID + 8) & 1); + exynos4_clk_register_fixed_ext(xxti_f, xusbxti_f); #endif + mct_init(S5P_VA_SYSTIMER, EXYNOS4_IRQ_MCT_G0, EXYNOS4_IRQ_MCT_L0, EXYNOS4_IRQ_MCT_L1); + } +} + +static unsigned int max_combiner_nr(void) +{ + if (soc_is_exynos5250()) + return EXYNOS5_MAX_COMBINER_NR; + else if (soc_is_exynos4412()) + return EXYNOS4412_MAX_COMBINER_NR; + else if (soc_is_exynos4212()) + return EXYNOS4212_MAX_COMBINER_NR; + else + return EXYNOS4210_MAX_COMBINER_NR; } + void __init exynos4_init_irq(void) { unsigned int gic_bank_offset; @@ -455,14 +486,10 @@ void __init exynos4_init_irq(void) #endif if (!of_have_populated_dt()) - combiner_init(S5P_VA_COMBINER_BASE, NULL); + combiner_init(S5P_VA_COMBINER_BASE, NULL, + max_combiner_nr(), COMBINER_IRQ(0, 0)); - /* - * The parameters of s5p_init_irq() are for VIC init. - * Theses parameters should be NULL and 0 because EXYNOS4 - * uses GIC instead of VIC. - */ - s5p_init_irq(NULL, 0); + gic_arch_extn.irq_set_wake = s3c_irq_wake; } void __init exynos5_init_irq(void) @@ -470,14 +497,6 @@ void __init exynos5_init_irq(void) #ifdef CONFIG_OF irqchip_init(); #endif - /* - * The parameters of s5p_init_irq() are for VIC init. - * Theses parameters should be NULL and 0 because EXYNOS4 - * uses GIC instead of VIC. - */ - if (!of_machine_is_compatible("samsung,exynos5440")) - s5p_init_irq(NULL, 0); - gic_arch_extn.irq_set_wake = s3c_irq_wake; } @@ -822,6 +841,7 @@ static int __init exynos_init_irq_eint(void) static const struct of_device_id exynos_pinctrl_ids[] = { { .compatible = "samsung,exynos4210-pinctrl", }, { .compatible = "samsung,exynos4x12-pinctrl", }, + { .compatible = "samsung,exynos5250-pinctrl", }, }; struct device_node *pctrl_np, *wkup_np; const char *wkup_compat = "samsung,exynos4210-wakeup-eint"; @@ -875,3 +895,30 @@ static int __init exynos_init_irq_eint(void) return 0; } arch_initcall(exynos_init_irq_eint); + +static struct resource exynos4_pmu_resource[] = { + DEFINE_RES_IRQ(EXYNOS4_IRQ_PMU), + DEFINE_RES_IRQ(EXYNOS4_IRQ_PMU_CPU1), +#if defined(CONFIG_SOC_EXYNOS4412) + DEFINE_RES_IRQ(EXYNOS4_IRQ_PMU_CPU2), + DEFINE_RES_IRQ(EXYNOS4_IRQ_PMU_CPU3), +#endif +}; + +static struct platform_device exynos4_device_pmu = { + .name = "arm-pmu", + .num_resources = ARRAY_SIZE(exynos4_pmu_resource), + .resource = exynos4_pmu_resource, +}; + +static int __init exynos_armpmu_init(void) +{ + if (!of_have_populated_dt()) { + if (soc_is_exynos4210() || soc_is_exynos4212()) + exynos4_device_pmu.num_resources = 2; + platform_device_register(&exynos4_device_pmu); + } + + return 0; +} +arch_initcall(exynos_armpmu_init); diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index 9339bb8954be..60dd35cc01a6 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -12,7 +12,11 @@ #ifndef __ARCH_ARM_MACH_EXYNOS_COMMON_H #define __ARCH_ARM_MACH_EXYNOS_COMMON_H -extern void exynos4_timer_init(void); +#include <linux/of.h> + +void mct_init(void __iomem *base, int irq_g0, int irq_l0, int irq_l1); +void exynos_init_time(void); +extern unsigned long xxti_f, xusbxti_f; struct map_desc; void exynos_init_io(struct map_desc *mach_desc, int size); @@ -22,6 +26,12 @@ void exynos4_restart(char mode, const char *cmd); void exynos5_restart(char mode, const char *cmd); void exynos_init_late(void); +/* ToDo: remove these after migrating legacy exynos4 platforms to dt */ +void exynos4_clk_init(struct device_node *np, int is_exynos4210, void __iomem *reg_base, unsigned long xom); +void exynos4_clk_register_fixed_ext(unsigned long, unsigned long); + +void exynos_firmware_init(void); + #ifdef CONFIG_PM_GENERIC_DOMAINS int exynos_pm_late_initcall(void); #else @@ -61,7 +71,8 @@ void exynos4212_register_clocks(void); #endif struct device_node; -void combiner_init(void __iomem *combiner_base, struct device_node *np); +void combiner_init(void __iomem *combiner_base, struct device_node *np, + unsigned int max_nr, int irq_base); extern struct smp_operations exynos_smp_ops; diff --git a/arch/arm/mach-exynos/cpuidle.c b/arch/arm/mach-exynos/cpuidle.c index fcfe0251aa3e..17a18ff3d71e 100644 --- a/arch/arm/mach-exynos/cpuidle.c +++ b/arch/arm/mach-exynos/cpuidle.c @@ -41,24 +41,24 @@ static int exynos4_enter_lowpower(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index); -static struct cpuidle_state exynos4_cpuidle_set[] __initdata = { - [0] = ARM_CPUIDLE_WFI_STATE, - [1] = { - .enter = exynos4_enter_lowpower, - .exit_latency = 300, - .target_residency = 100000, - .flags = CPUIDLE_FLAG_TIME_VALID, - .name = "C1", - .desc = "ARM power down", - }, -}; - static DEFINE_PER_CPU(struct cpuidle_device, exynos4_cpuidle_device); static struct cpuidle_driver exynos4_idle_driver = { .name = "exynos4_idle", .owner = THIS_MODULE, - .en_core_tk_irqen = 1, + .states = { + [0] = ARM_CPUIDLE_WFI_STATE, + [1] = { + .enter = exynos4_enter_lowpower, + .exit_latency = 300, + .target_residency = 100000, + .flags = CPUIDLE_FLAG_TIME_VALID, + .name = "C1", + .desc = "ARM power down", + }, + }, + .state_count = 2, + .safe_state_index = 0, }; /* Ext-GIC nIRQ/nFIQ is the only wakeup source in AFTR */ @@ -193,37 +193,30 @@ static void __init exynos5_core_down_clk(void) static int __init exynos4_init_cpuidle(void) { - int i, max_cpuidle_state, cpu_id; + int cpu_id, ret; struct cpuidle_device *device; - struct cpuidle_driver *drv = &exynos4_idle_driver; if (soc_is_exynos5250()) exynos5_core_down_clk(); - /* Setup cpuidle driver */ - drv->state_count = (sizeof(exynos4_cpuidle_set) / - sizeof(struct cpuidle_state)); - max_cpuidle_state = drv->state_count; - for (i = 0; i < max_cpuidle_state; i++) { - memcpy(&drv->states[i], &exynos4_cpuidle_set[i], - sizeof(struct cpuidle_state)); + ret = cpuidle_register_driver(&exynos4_idle_driver); + if (ret) { + printk(KERN_ERR "CPUidle failed to register driver\n"); + return ret; } - drv->safe_state_index = 0; - cpuidle_register_driver(&exynos4_idle_driver); - for_each_cpu(cpu_id, cpu_online_mask) { + for_each_online_cpu(cpu_id) { device = &per_cpu(exynos4_cpuidle_device, cpu_id); device->cpu = cpu_id; - if (cpu_id == 0) - device->state_count = (sizeof(exynos4_cpuidle_set) / - sizeof(struct cpuidle_state)); - else - device->state_count = 1; /* Support IDLE only */ + /* Support IDLE only */ + if (cpu_id != 0) + device->state_count = 1; - if (cpuidle_register_device(device)) { - printk(KERN_ERR "CPUidle register device failed\n,"); - return -EIO; + ret = cpuidle_register_device(device); + if (ret) { + printk(KERN_ERR "CPUidle register device failed\n"); + return ret; } } diff --git a/arch/arm/mach-exynos/dev-ohci.c b/arch/arm/mach-exynos/dev-ohci.c index 4244d02dafbd..d5bc129e6bb7 100644 --- a/arch/arm/mach-exynos/dev-ohci.c +++ b/arch/arm/mach-exynos/dev-ohci.c @@ -12,7 +12,7 @@ #include <linux/dma-mapping.h> #include <linux/platform_device.h> -#include <linux/platform_data/usb-exynos.h> +#include <linux/platform_data/usb-ohci-exynos.h> #include <mach/irqs.h> #include <mach/map.h> diff --git a/arch/arm/mach-exynos/dev-uart.c b/arch/arm/mach-exynos/dev-uart.c index 7c42f4b7c8be..c48aff02c786 100644 --- a/arch/arm/mach-exynos/dev-uart.c +++ b/arch/arm/mach-exynos/dev-uart.c @@ -20,6 +20,7 @@ #include <asm/mach/irq.h> #include <mach/hardware.h> #include <mach/map.h> +#include <mach/irqs.h> #include <plat/devs.h> diff --git a/arch/arm/mach-exynos/exynos-smc.S b/arch/arm/mach-exynos/exynos-smc.S new file mode 100644 index 000000000000..2e27aa3813fd --- /dev/null +++ b/arch/arm/mach-exynos/exynos-smc.S @@ -0,0 +1,22 @@ +/* + * Copyright (C) 2012 Samsung Electronics. + * + * Copied from omap-smc.S Copyright (C) 2010 Texas Instruments, Inc. + * + * This program is free software,you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/linkage.h> + +/* + * Function signature: void exynos_smc(u32 cmd, u32 arg1, u32 arg2, u32 arg3) + */ + +ENTRY(exynos_smc) + stmfd sp!, {r4-r11, lr} + dsb + smc #0 + ldmfd sp!, {r4-r11, pc} +ENDPROC(exynos_smc) diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c new file mode 100644 index 000000000000..ed11f100d479 --- /dev/null +++ b/arch/arm/mach-exynos/firmware.c @@ -0,0 +1,70 @@ +/* + * Copyright (C) 2012 Samsung Electronics. + * Kyungmin Park <kyungmin.park@samsung.com> + * Tomasz Figa <t.figa@samsung.com> + * + * This program is free software,you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/io.h> +#include <linux/init.h> +#include <linux/of.h> +#include <linux/of_address.h> + +#include <asm/firmware.h> + +#include <mach/map.h> + +#include "smc.h" + +static int exynos_do_idle(void) +{ + exynos_smc(SMC_CMD_SLEEP, 0, 0, 0); + return 0; +} + +static int exynos_cpu_boot(int cpu) +{ + exynos_smc(SMC_CMD_CPU1BOOT, cpu, 0, 0); + return 0; +} + +static int exynos_set_cpu_boot_addr(int cpu, unsigned long boot_addr) +{ + void __iomem *boot_reg = S5P_VA_SYSRAM_NS + 0x1c + 4*cpu; + + __raw_writel(boot_addr, boot_reg); + return 0; +} + +static const struct firmware_ops exynos_firmware_ops = { + .do_idle = exynos_do_idle, + .set_cpu_boot_addr = exynos_set_cpu_boot_addr, + .cpu_boot = exynos_cpu_boot, +}; + +void __init exynos_firmware_init(void) +{ + if (of_have_populated_dt()) { + struct device_node *nd; + const __be32 *addr; + + nd = of_find_compatible_node(NULL, NULL, + "samsung,secure-firmware"); + if (!nd) + return; + + addr = of_get_address(nd, 0, NULL, NULL); + if (!addr) { + pr_err("%s: No address specified.\n", __func__); + return; + } + } + + pr_info("Running under secure firmware.\n"); + + register_firmware_ops(&exynos_firmware_ops); +} diff --git a/arch/arm/mach-exynos/hotplug.c b/arch/arm/mach-exynos/hotplug.c index c3f825b27947..af90cfa2f826 100644 --- a/arch/arm/mach-exynos/hotplug.c +++ b/arch/arm/mach-exynos/hotplug.c @@ -28,7 +28,6 @@ static inline void cpu_enter_lowpower_a9(void) { unsigned int v; - flush_cache_all(); asm volatile( " mcr p15, 0, %1, c7, c5, 0\n" " mcr p15, 0, %1, c7, c10, 4\n" diff --git a/arch/arm/mach-exynos/include/mach/irqs.h b/arch/arm/mach-exynos/include/mach/irqs.h index 1f4dc35cd4b9..c72f59d91fce 100644 --- a/arch/arm/mach-exynos/include/mach/irqs.h +++ b/arch/arm/mach-exynos/include/mach/irqs.h @@ -30,8 +30,6 @@ /* For EXYNOS4 and EXYNOS5 */ -#define EXYNOS_IRQ_MCT_LOCALTIMER IRQ_PPI(12) - #define EXYNOS_IRQ_EINT16_31 IRQ_SPI(32) /* For EXYNOS4 SoCs */ @@ -128,7 +126,7 @@ #define EXYNOS4_IRQ_ADC1 IRQ_SPI(107) #define EXYNOS4_IRQ_PEN1 IRQ_SPI(108) #define EXYNOS4_IRQ_KEYPAD IRQ_SPI(109) -#define EXYNOS4_IRQ_PMU IRQ_SPI(110) +#define EXYNOS4_IRQ_POWER_PMU IRQ_SPI(110) #define EXYNOS4_IRQ_GPS IRQ_SPI(111) #define EXYNOS4_IRQ_INTFEEDCTRL_SSS IRQ_SPI(112) #define EXYNOS4_IRQ_SLIMBUS IRQ_SPI(113) @@ -136,6 +134,11 @@ #define EXYNOS4_IRQ_TSI IRQ_SPI(115) #define EXYNOS4_IRQ_SATA IRQ_SPI(116) +#define EXYNOS4_IRQ_PMU COMBINER_IRQ(2, 2) +#define EXYNOS4_IRQ_PMU_CPU1 COMBINER_IRQ(3, 2) +#define EXYNOS4_IRQ_PMU_CPU2 COMBINER_IRQ(18, 2) +#define EXYNOS4_IRQ_PMU_CPU3 COMBINER_IRQ(19, 2) + #define EXYNOS4_IRQ_TMU_TRIG0 COMBINER_IRQ(2, 4) #define EXYNOS4_IRQ_TMU_TRIG1 COMBINER_IRQ(3, 4) @@ -168,7 +171,10 @@ #define EXYNOS4_IRQ_FIMD0_VSYNC COMBINER_IRQ(11, 1) #define EXYNOS4_IRQ_FIMD0_SYSTEM COMBINER_IRQ(11, 2) -#define EXYNOS4_MAX_COMBINER_NR 16 +#define EXYNOS4210_MAX_COMBINER_NR 16 +#define EXYNOS4212_MAX_COMBINER_NR 18 +#define EXYNOS4412_MAX_COMBINER_NR 20 +#define EXYNOS4_MAX_COMBINER_NR EXYNOS4412_MAX_COMBINER_NR #define EXYNOS4_IRQ_GPIO1_NR_GROUPS 16 #define EXYNOS4_IRQ_GPIO2_NR_GROUPS 9 @@ -233,7 +239,6 @@ #define IRQ_TC EXYNOS4_IRQ_PEN0 #define IRQ_KEYPAD EXYNOS4_IRQ_KEYPAD -#define IRQ_PMU EXYNOS4_IRQ_PMU #define IRQ_FIMD0_FIFO EXYNOS4_IRQ_FIMD0_FIFO #define IRQ_FIMD0_VSYNC EXYNOS4_IRQ_FIMD0_VSYNC @@ -323,8 +328,6 @@ #define EXYNOS5_IRQ_CEC IRQ_SPI(114) #define EXYNOS5_IRQ_SATA IRQ_SPI(115) -#define EXYNOS5_IRQ_MCT_L0 IRQ_SPI(120) -#define EXYNOS5_IRQ_MCT_L1 IRQ_SPI(121) #define EXYNOS5_IRQ_MMC44 IRQ_SPI(123) #define EXYNOS5_IRQ_MDMA1 IRQ_SPI(124) #define EXYNOS5_IRQ_FIMC_LITE0 IRQ_SPI(125) @@ -419,8 +422,6 @@ #define EXYNOS5_IRQ_PMU_CPU1 COMBINER_IRQ(22, 4) #define EXYNOS5_IRQ_EINT0 COMBINER_IRQ(23, 0) -#define EXYNOS5_IRQ_MCT_G0 COMBINER_IRQ(23, 3) -#define EXYNOS5_IRQ_MCT_G1 COMBINER_IRQ(23, 4) #define EXYNOS5_IRQ_EINT1 COMBINER_IRQ(24, 0) #define EXYNOS5_IRQ_SYSMMU_LITE1_0 COMBINER_IRQ(24, 1) @@ -466,7 +467,10 @@ #define IRQ_TIMER_BASE (IRQ_GPIO_END + 64) /* Set the default NR_IRQS */ +#define EXYNOS_NR_IRQS (IRQ_TIMER_BASE + IRQ_TIMER_COUNT) -#define NR_IRQS (IRQ_TIMER_BASE + IRQ_TIMER_COUNT) +#ifndef CONFIG_SPARSE_IRQ +#define NR_IRQS EXYNOS_NR_IRQS +#endif #endif /* __ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h index 1df6abbf53b8..92b29bb583cb 100644 --- a/arch/arm/mach-exynos/include/mach/map.h +++ b/arch/arm/mach-exynos/include/mach/map.h @@ -26,6 +26,9 @@ #define EXYNOS4_PA_SYSRAM0 0x02025000 #define EXYNOS4_PA_SYSRAM1 0x02020000 #define EXYNOS5_PA_SYSRAM 0x02020000 +#define EXYNOS4210_PA_SYSRAM_NS 0x0203F000 +#define EXYNOS4x12_PA_SYSRAM_NS 0x0204F000 +#define EXYNOS5250_PA_SYSRAM_NS 0x0204F000 #define EXYNOS4_PA_FIMC0 0x11800000 #define EXYNOS4_PA_FIMC1 0x11810000 @@ -53,7 +56,6 @@ #define EXYNOS4_PA_ONENAND_DMA 0x0C600000 #define EXYNOS_PA_CHIPID 0x10000000 -#define EXYNOS5440_PA_CHIPID 0x00160000 #define EXYNOS4_PA_SYSCON 0x10010000 #define EXYNOS5_PA_SYSCON 0x10050100 @@ -65,7 +67,6 @@ #define EXYNOS5_PA_CMU 0x10010000 #define EXYNOS4_PA_SYSTIMER 0x10050000 -#define EXYNOS5_PA_SYSTIMER 0x101C0000 #define EXYNOS4_PA_WATCHDOG 0x10060000 #define EXYNOS5_PA_WATCHDOG 0x101D0000 diff --git a/arch/arm/mach-exynos/include/mach/pm-core.h b/arch/arm/mach-exynos/include/mach/pm-core.h index a67ecfaf1216..7dbbfec13ea5 100644 --- a/arch/arm/mach-exynos/include/mach/pm-core.h +++ b/arch/arm/mach-exynos/include/mach/pm-core.h @@ -27,13 +27,8 @@ static inline void s3c_pm_debug_init_uart(void) static inline void s3c_pm_arch_prepare_irqs(void) { - unsigned int tmp; - tmp = __raw_readl(S5P_WAKEUP_MASK); - tmp &= ~(1 << 31); - __raw_writel(tmp, S5P_WAKEUP_MASK); - - __raw_writel(s3c_irqwake_intmask, S5P_WAKEUP_MASK); - __raw_writel(s3c_irqwake_eintmask & 0xFFFFFFFE, S5P_EINT_WAKEUP_MASK); + __raw_writel(s3c_irqwake_eintmask, S5P_EINT_WAKEUP_MASK); + __raw_writel(s3c_irqwake_intmask & ~(1 << 31), S5P_WAKEUP_MASK); } static inline void s3c_pm_arch_stop_clocks(void) diff --git a/arch/arm/mach-exynos/include/mach/regs-mct.h b/arch/arm/mach-exynos/include/mach/regs-mct.h deleted file mode 100644 index 80dd02ad6d61..000000000000 --- a/arch/arm/mach-exynos/include/mach/regs-mct.h +++ /dev/null @@ -1,53 +0,0 @@ -/* arch/arm/mach-exynos4/include/mach/regs-mct.h - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS4 MCT configutation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_REGS_MCT_H -#define __ASM_ARCH_REGS_MCT_H __FILE__ - -#include <mach/map.h> - -#define EXYNOS4_MCTREG(x) (S5P_VA_SYSTIMER + (x)) - -#define EXYNOS4_MCT_G_CNT_L EXYNOS4_MCTREG(0x100) -#define EXYNOS4_MCT_G_CNT_U EXYNOS4_MCTREG(0x104) -#define EXYNOS4_MCT_G_CNT_WSTAT EXYNOS4_MCTREG(0x110) - -#define EXYNOS4_MCT_G_COMP0_L EXYNOS4_MCTREG(0x200) -#define EXYNOS4_MCT_G_COMP0_U EXYNOS4_MCTREG(0x204) -#define EXYNOS4_MCT_G_COMP0_ADD_INCR EXYNOS4_MCTREG(0x208) - -#define EXYNOS4_MCT_G_TCON EXYNOS4_MCTREG(0x240) - -#define EXYNOS4_MCT_G_INT_CSTAT EXYNOS4_MCTREG(0x244) -#define EXYNOS4_MCT_G_INT_ENB EXYNOS4_MCTREG(0x248) -#define EXYNOS4_MCT_G_WSTAT EXYNOS4_MCTREG(0x24C) - -#define _EXYNOS4_MCT_L_BASE EXYNOS4_MCTREG(0x300) -#define EXYNOS4_MCT_L_BASE(x) (_EXYNOS4_MCT_L_BASE + (0x100 * x)) -#define EXYNOS4_MCT_L_MASK (0xffffff00) - -#define MCT_L_TCNTB_OFFSET (0x00) -#define MCT_L_ICNTB_OFFSET (0x08) -#define MCT_L_TCON_OFFSET (0x20) -#define MCT_L_INT_CSTAT_OFFSET (0x30) -#define MCT_L_INT_ENB_OFFSET (0x34) -#define MCT_L_WSTAT_OFFSET (0x40) - -#define MCT_G_TCON_START (1 << 8) -#define MCT_G_TCON_COMP0_AUTO_INC (1 << 1) -#define MCT_G_TCON_COMP0_ENABLE (1 << 0) - -#define MCT_L_TCON_INTERVAL_MODE (1 << 2) -#define MCT_L_TCON_INT_START (1 << 1) -#define MCT_L_TCON_TIMER_START (1 << 0) - -#endif /* __ASM_ARCH_REGS_MCT_H */ diff --git a/arch/arm/mach-exynos/mach-armlex4210.c b/arch/arm/mach-exynos/mach-armlex4210.c index 685f29173afa..5f0f55701374 100644 --- a/arch/arm/mach-exynos/mach-armlex4210.c +++ b/arch/arm/mach-exynos/mach-armlex4210.c @@ -25,6 +25,7 @@ #include <plat/regs-srom.h> #include <plat/sdhci.h> +#include <mach/irqs.h> #include <mach/map.h> #include "common.h" @@ -177,7 +178,6 @@ static void __init armlex4210_smsc911x_init(void) static void __init armlex4210_map_io(void) { exynos_init_io(NULL, 0); - s3c24xx_init_clocks(24000000); s3c24xx_init_uarts(armlex4210_uartcfgs, ARRAY_SIZE(armlex4210_uartcfgs)); } @@ -202,6 +202,6 @@ MACHINE_START(ARMLEX4210, "ARMLEX4210") .map_io = armlex4210_map_io, .init_machine = armlex4210_machine_init, .init_late = exynos_init_late, - .init_time = exynos4_timer_init, + .init_time = exynos_init_time, .restart = exynos4_restart, MACHINE_END diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c index 3358088c822a..b9ed834a7eee 100644 --- a/arch/arm/mach-exynos/mach-exynos4-dt.c +++ b/arch/arm/mach-exynos/mach-exynos4-dt.c @@ -11,121 +11,26 @@ * published by the Free Software Foundation. */ +#include <linux/kernel.h> #include <linux/of_platform.h> +#include <linux/of_fdt.h> #include <linux/serial_core.h> +#include <linux/memblock.h> +#include <linux/clocksource.h> #include <asm/mach/arch.h> -#include <mach/map.h> - -#include <plat/cpu.h> -#include <plat/regs-serial.h> +#include <plat/mfc.h> #include "common.h" -/* - * The following lookup table is used to override device names when devices - * are registered from device tree. This is temporarily added to enable - * device tree support addition for the Exynos4 architecture. - * - * For drivers that require platform data to be provided from the machine - * file, a platform data pointer can also be supplied along with the - * devices names. Usually, the platform data elements that cannot be parsed - * from the device tree by the drivers (example: function pointers) are - * supplied. But it should be noted that this is a temporary mechanism and - * at some point, the drivers should be capable of parsing all the platform - * data from the device tree. - */ -static const struct of_dev_auxdata exynos4_auxdata_lookup[] __initconst = { - OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS4_PA_UART0, - "exynos4210-uart.0", NULL), - OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS4_PA_UART1, - "exynos4210-uart.1", NULL), - OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS4_PA_UART2, - "exynos4210-uart.2", NULL), - OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS4_PA_UART3, - "exynos4210-uart.3", NULL), - OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(0), - "exynos4-sdhci.0", NULL), - OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(1), - "exynos4-sdhci.1", NULL), - OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(2), - "exynos4-sdhci.2", NULL), - OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(3), - "exynos4-sdhci.3", NULL), - OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(0), - "s3c2440-i2c.0", NULL), - OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(1), - "s3c2440-i2c.1", NULL), - OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(2), - "s3c2440-i2c.2", NULL), - OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(3), - "s3c2440-i2c.3", NULL), - OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(4), - "s3c2440-i2c.4", NULL), - OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(5), - "s3c2440-i2c.5", NULL), - OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(6), - "s3c2440-i2c.6", NULL), - OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(7), - "s3c2440-i2c.7", NULL), - OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS4_PA_SPI0, - "exynos4210-spi.0", NULL), - OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS4_PA_SPI1, - "exynos4210-spi.1", NULL), - OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS4_PA_SPI2, - "exynos4210-spi.2", NULL), - OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA0, "dma-pl330.0", NULL), - OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA1, "dma-pl330.1", NULL), - OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_MDMA1, "dma-pl330.2", NULL), - OF_DEV_AUXDATA("samsung,exynos4210-tmu", EXYNOS4_PA_TMU, - "exynos-tmu", NULL), - OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13620000, - "exynos-sysmmu.0", NULL), /* MFC_L */ - OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13630000, - "exynos-sysmmu.1", NULL), /* MFC_R */ - OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13E20000, - "exynos-sysmmu.2", NULL), /* TV */ - OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11A60000, - "exynos-sysmmu.3", NULL), /* JPEG */ - OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x12A30000, - "exynos-sysmmu.4", NULL), /* ROTATOR */ - OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11A20000, - "exynos-sysmmu.5", NULL), /* FIMC0 */ - OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11A30000, - "exynos-sysmmu.6", NULL), /* FIMC1 */ - OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11A40000, - "exynos-sysmmu.7", NULL), /* FIMC2 */ - OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11A50000, - "exynos-sysmmu.8", NULL), /* FIMC3 */ - OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x12A20000, - "exynos-sysmmu.9", NULL), /* G2D(4210) */ - OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x10A40000, - "exynos-sysmmu.9", NULL), /* G2D(4x12) */ - OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11E20000, - "exynos-sysmmu.10", NULL), /* FIMD0 */ - OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x12220000, - "exynos-sysmmu.11", NULL), /* FIMD1(4210) */ - OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x12260000, - "exynos-sysmmu.12", NULL), /* IS0(4x12) */ - OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x122B0000, - "exynos-sysmmu.13", NULL), /* IS1(4x12) */ - OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x123B0000, - "exynos-sysmmu.14", NULL), /* FIMC-LITE0(4x12) */ - OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x123C0000, - "exynos-sysmmu.15", NULL), /* FIMC-LITE1(4x12) */ - {}, -}; - static void __init exynos4_dt_map_io(void) { exynos_init_io(NULL, 0); - s3c24xx_init_clocks(24000000); } static void __init exynos4_dt_machine_init(void) { - of_platform_populate(NULL, of_default_bus_match_table, - exynos4_auxdata_lookup, NULL); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } static char const *exynos4_dt_compat[] __initdata = { @@ -135,14 +40,28 @@ static char const *exynos4_dt_compat[] __initdata = { NULL }; +static void __init exynos4_reserve(void) +{ +#ifdef CONFIG_S5P_DEV_MFC + struct s5p_mfc_dt_meminfo mfc_mem; + + /* Reserve memory for MFC only if it's available */ + mfc_mem.compatible = "samsung,mfc-v5"; + if (of_scan_flat_dt(s5p_fdt_find_mfc_mem, &mfc_mem)) + s5p_mfc_reserve_mem(mfc_mem.roff, mfc_mem.rsize, mfc_mem.loff, + mfc_mem.lsize); +#endif +} DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)") /* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */ .smp = smp_ops(exynos_smp_ops), .init_irq = exynos4_init_irq, .map_io = exynos4_dt_map_io, + .init_early = exynos_firmware_init, .init_machine = exynos4_dt_machine_init, .init_late = exynos_init_late, - .init_time = exynos4_timer_init, + .init_time = exynos_init_time, .dt_compat = exynos4_dt_compat, .restart = exynos4_restart, + .reserve = exynos4_reserve, MACHINE_END diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c index acaeb14db54b..753b94f3fca7 100644 --- a/arch/arm/mach-exynos/mach-exynos5-dt.c +++ b/arch/arm/mach-exynos/mach-exynos5-dt.c @@ -11,151 +11,21 @@ #include <linux/of_platform.h> #include <linux/of_fdt.h> -#include <linux/serial_core.h> #include <linux/memblock.h> #include <linux/io.h> +#include <linux/clocksource.h> #include <asm/mach/arch.h> -#include <mach/map.h> #include <mach/regs-pmu.h> #include <plat/cpu.h> -#include <plat/regs-serial.h> #include <plat/mfc.h> #include "common.h" -/* - * The following lookup table is used to override device names when devices - * are registered from device tree. This is temporarily added to enable - * device tree support addition for the EXYNOS5 architecture. - * - * For drivers that require platform data to be provided from the machine - * file, a platform data pointer can also be supplied along with the - * devices names. Usually, the platform data elements that cannot be parsed - * from the device tree by the drivers (example: function pointers) are - * supplied. But it should be noted that this is a temporary mechanism and - * at some point, the drivers should be capable of parsing all the platform - * data from the device tree. - */ -static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = { - OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5_PA_UART0, - "exynos4210-uart.0", NULL), - OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5_PA_UART1, - "exynos4210-uart.1", NULL), - OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5_PA_UART2, - "exynos4210-uart.2", NULL), - OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5_PA_UART3, - "exynos4210-uart.3", NULL), - OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(0), - "s3c2440-i2c.0", NULL), - OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(1), - "s3c2440-i2c.1", NULL), - OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(2), - "s3c2440-i2c.2", NULL), - OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(3), - "s3c2440-i2c.3", NULL), - OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(4), - "s3c2440-i2c.4", NULL), - OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(5), - "s3c2440-i2c.5", NULL), - OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(6), - "s3c2440-i2c.6", NULL), - OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(7), - "s3c2440-i2c.7", NULL), - OF_DEV_AUXDATA("samsung,s3c2440-hdmiphy-i2c", EXYNOS5_PA_IIC(8), - "s3c2440-hdmiphy-i2c", NULL), - OF_DEV_AUXDATA("samsung,exynos5250-dw-mshc", EXYNOS5_PA_DWMCI0, - "dw_mmc.0", NULL), - OF_DEV_AUXDATA("samsung,exynos5250-dw-mshc", EXYNOS5_PA_DWMCI1, - "dw_mmc.1", NULL), - OF_DEV_AUXDATA("samsung,exynos5250-dw-mshc", EXYNOS5_PA_DWMCI2, - "dw_mmc.2", NULL), - OF_DEV_AUXDATA("samsung,exynos5250-dw-mshc", EXYNOS5_PA_DWMCI3, - "dw_mmc.3", NULL), - OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS5_PA_SPI0, - "exynos4210-spi.0", NULL), - OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS5_PA_SPI1, - "exynos4210-spi.1", NULL), - OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS5_PA_SPI2, - "exynos4210-spi.2", NULL), - OF_DEV_AUXDATA("samsung,exynos5-sata-ahci", 0x122F0000, - "exynos5-sata", NULL), - OF_DEV_AUXDATA("samsung,exynos5-sata-phy", 0x12170000, - "exynos5-sata-phy", NULL), - OF_DEV_AUXDATA("samsung,exynos5-sata-phy-i2c", 0x121D0000, - "exynos5-sata-phy-i2c", NULL), - OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA0, "dma-pl330.0", NULL), - OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.1", NULL), - OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_MDMA1, "dma-pl330.2", NULL), - OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC0, - "exynos-gsc.0", NULL), - OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC1, - "exynos-gsc.1", NULL), - OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC2, - "exynos-gsc.2", NULL), - OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC3, - "exynos-gsc.3", NULL), - OF_DEV_AUXDATA("samsung,exynos5-hdmi", 0x14530000, - "exynos5-hdmi", NULL), - OF_DEV_AUXDATA("samsung,exynos5-mixer", 0x14450000, - "exynos5-mixer", NULL), - OF_DEV_AUXDATA("samsung,mfc-v6", 0x11000000, "s5p-mfc-v6", NULL), - OF_DEV_AUXDATA("samsung,exynos5250-tmu", 0x10060000, - "exynos-tmu", NULL), - OF_DEV_AUXDATA("samsung,i2s-v5", 0x03830000, - "samsung-i2s.0", NULL), - OF_DEV_AUXDATA("samsung,i2s-v5", 0x12D60000, - "samsung-i2s.1", NULL), - OF_DEV_AUXDATA("samsung,i2s-v5", 0x12D70000, - "samsung-i2s.2", NULL), - OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11210000, - "exynos-sysmmu.0", "mfc"), /* MFC_L */ - OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11200000, - "exynos-sysmmu.1", "mfc"), /* MFC_R */ - OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x14650000, - "exynos-sysmmu.2", NULL), /* TV */ - OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11F20000, - "exynos-sysmmu.3", "jpeg"), /* JPEG */ - OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11D40000, - "exynos-sysmmu.4", NULL), /* ROTATOR */ - OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13E80000, - "exynos-sysmmu.5", "gscl"), /* GSCL0 */ - OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13E90000, - "exynos-sysmmu.6", "gscl"), /* GSCL1 */ - OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13EA0000, - "exynos-sysmmu.7", "gscl"), /* GSCL2 */ - OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13EB0000, - "exynos-sysmmu.8", "gscl"), /* GSCL3 */ - OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13260000, - "exynos-sysmmu.9", NULL), /* FIMC-IS0 */ - OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x132C0000, - "exynos-sysmmu.10", NULL), /* FIMC-IS1 */ - OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x14640000, - "exynos-sysmmu.11", NULL), /* FIMD1 */ - OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13C40000, - "exynos-sysmmu.12", NULL), /* FIMC-LITE0 */ - OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13C50000, - "exynos-sysmmu.13", NULL), /* FIMC-LITE1 */ - OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x10A60000, - "exynos-sysmmu.14", NULL), /* G2D */ - {}, -}; - -static const struct of_dev_auxdata exynos5440_auxdata_lookup[] __initconst = { - OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5440_PA_UART0, - "exynos4210-uart.0", NULL), - {}, -}; - static void __init exynos5_dt_map_io(void) { - unsigned long root = of_get_flat_dt_root(); - exynos_init_io(NULL, 0); - - if (of_flat_dt_is_compatible(root, "samsung,exynos5250")) - s3c24xx_init_clocks(24000000); } static void __init exynos5_dt_machine_init(void) @@ -182,12 +52,7 @@ static void __init exynos5_dt_machine_init(void) } } - if (of_machine_is_compatible("samsung,exynos5250")) - of_platform_populate(NULL, of_default_bus_match_table, - exynos5250_auxdata_lookup, NULL); - else if (of_machine_is_compatible("samsung,exynos5440")) - of_platform_populate(NULL, of_default_bus_match_table, - exynos5440_auxdata_lookup, NULL); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } static char const *exynos5_dt_compat[] __initdata = { @@ -216,7 +81,7 @@ DT_MACHINE_START(EXYNOS5_DT, "SAMSUNG EXYNOS5 (Flattened Device Tree)") .map_io = exynos5_dt_map_io, .init_machine = exynos5_dt_machine_init, .init_late = exynos_init_late, - .init_time = exynos4_timer_init, + .init_time = exynos_init_time, .dt_compat = exynos5_dt_compat, .restart = exynos5_restart, .reserve = exynos5_reserve, diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c index 1ea79730187f..5c8b2878dbbd 100644 --- a/arch/arm/mach-exynos/mach-nuri.c +++ b/arch/arm/mach-exynos/mach-nuri.c @@ -53,6 +53,7 @@ #include <plat/fimc-core.h> #include <plat/camport.h> +#include <mach/irqs.h> #include <mach/map.h> #include "common.h" @@ -1251,7 +1252,7 @@ static void __init nuri_camera_init(void) } m5mols_board_info.irq = s5p_register_gpio_interrupt(GPIO_CAM_8M_ISP_INT); - if (!IS_ERR_VALUE(m5mols_board_info.irq)) + if (m5mols_board_info.irq >= 0) s3c_gpio_cfgpin(GPIO_CAM_8M_ISP_INT, S3C_GPIO_SFN(0xF)); else pr_err("%s: Failed to configure 8M_ISP_INT GPIO\n", __func__); @@ -1330,8 +1331,9 @@ static struct platform_device *nuri_devices[] __initdata = { static void __init nuri_map_io(void) { exynos_init_io(NULL, 0); - s3c24xx_init_clocks(clk_xusbxti.rate); s3c24xx_init_uarts(nuri_uartcfgs, ARRAY_SIZE(nuri_uartcfgs)); + xxti_f = 0; + xusbxti_f = 24000000; } static void __init nuri_reserve(void) @@ -1380,7 +1382,7 @@ MACHINE_START(NURI, "NURI") .map_io = nuri_map_io, .init_machine = nuri_machine_init, .init_late = exynos_init_late, - .init_time = exynos4_timer_init, + .init_time = exynos_init_time, .reserve = &nuri_reserve, .restart = exynos4_restart, MACHINE_END diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c index 579d2d171daa..27f03ed5d067 100644 --- a/arch/arm/mach-exynos/mach-origen.c +++ b/arch/arm/mach-exynos/mach-origen.c @@ -26,7 +26,7 @@ #include <linux/platform_data/i2c-s3c2410.h> #include <linux/platform_data/s3c-hsotg.h> #include <linux/platform_data/usb-ehci-s5p.h> -#include <linux/platform_data/usb-exynos.h> +#include <linux/platform_data/usb-ohci-exynos.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> @@ -46,6 +46,7 @@ #include <plat/hdmi.h> #include <mach/map.h> +#include <mach/irqs.h> #include <drm/exynos_drm.h> #include "common.h" @@ -754,8 +755,9 @@ static void s5p_tv_setup(void) static void __init origen_map_io(void) { exynos_init_io(NULL, 0); - s3c24xx_init_clocks(clk_xusbxti.rate); s3c24xx_init_uarts(origen_uartcfgs, ARRAY_SIZE(origen_uartcfgs)); + xxti_f = 0; + xusbxti_f = 24000000; } static void __init origen_power_init(void) @@ -815,7 +817,7 @@ MACHINE_START(ORIGEN, "ORIGEN") .map_io = origen_map_io, .init_machine = origen_machine_init, .init_late = exynos_init_late, - .init_time = exynos4_timer_init, + .init_time = exynos_init_time, .reserve = &origen_reserve, .restart = exynos4_restart, MACHINE_END diff --git a/arch/arm/mach-exynos/mach-smdk4x12.c b/arch/arm/mach-exynos/mach-smdk4x12.c index fe6149624b84..2c8af9617920 100644 --- a/arch/arm/mach-exynos/mach-smdk4x12.c +++ b/arch/arm/mach-exynos/mach-smdk4x12.c @@ -39,6 +39,7 @@ #include <plat/regs-serial.h> #include <plat/sdhci.h> +#include <mach/irqs.h> #include <mach/map.h> #include <drm/exynos_drm.h> @@ -322,7 +323,6 @@ static struct platform_device *smdk4x12_devices[] __initdata = { static void __init smdk4x12_map_io(void) { exynos_init_io(NULL, 0); - s3c24xx_init_clocks(clk_xusbxti.rate); s3c24xx_init_uarts(smdk4x12_uartcfgs, ARRAY_SIZE(smdk4x12_uartcfgs)); } @@ -376,7 +376,7 @@ MACHINE_START(SMDK4212, "SMDK4212") .init_irq = exynos4_init_irq, .map_io = smdk4x12_map_io, .init_machine = smdk4x12_machine_init, - .init_time = exynos4_timer_init, + .init_time = exynos_init_time, .restart = exynos4_restart, .reserve = &smdk4x12_reserve, MACHINE_END @@ -390,7 +390,7 @@ MACHINE_START(SMDK4412, "SMDK4412") .map_io = smdk4x12_map_io, .init_machine = smdk4x12_machine_init, .init_late = exynos_init_late, - .init_time = exynos4_timer_init, + .init_time = exynos_init_time, .restart = exynos4_restart, .reserve = &smdk4x12_reserve, MACHINE_END diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c index d71672922b19..d95b8cf85253 100644 --- a/arch/arm/mach-exynos/mach-smdkv310.c +++ b/arch/arm/mach-exynos/mach-smdkv310.c @@ -23,7 +23,7 @@ #include <linux/platform_data/i2c-s3c2410.h> #include <linux/platform_data/s3c-hsotg.h> #include <linux/platform_data/usb-ehci-s5p.h> -#include <linux/platform_data/usb-exynos.h> +#include <linux/platform_data/usb-ohci-exynos.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> @@ -43,6 +43,7 @@ #include <plat/clock.h> #include <plat/hdmi.h> +#include <mach/irqs.h> #include <mach/map.h> #include <drm/exynos_drm.h> @@ -371,8 +372,9 @@ static void s5p_tv_setup(void) static void __init smdkv310_map_io(void) { exynos_init_io(NULL, 0); - s3c24xx_init_clocks(clk_xusbxti.rate); s3c24xx_init_uarts(smdkv310_uartcfgs, ARRAY_SIZE(smdkv310_uartcfgs)); + xxti_f = 12000000; + xusbxti_f = 24000000; } static void __init smdkv310_reserve(void) @@ -423,7 +425,7 @@ MACHINE_START(SMDKV310, "SMDKV310") .init_irq = exynos4_init_irq, .map_io = smdkv310_map_io, .init_machine = smdkv310_machine_init, - .init_time = exynos4_timer_init, + .init_time = exynos_init_time, .reserve = &smdkv310_reserve, .restart = exynos4_restart, MACHINE_END @@ -436,7 +438,7 @@ MACHINE_START(SMDKC210, "SMDKC210") .map_io = smdkv310_map_io, .init_machine = smdkv310_machine_init, .init_late = exynos_init_late, - .init_time = exynos4_timer_init, + .init_time = exynos_init_time, .reserve = &smdkv310_reserve, .restart = exynos4_restart, MACHINE_END diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c index 497fcb793dc1..327d50d4681d 100644 --- a/arch/arm/mach-exynos/mach-universal_c210.c +++ b/arch/arm/mach-exynos/mach-universal_c210.c @@ -41,7 +41,7 @@ #include <plat/mfc.h> #include <plat/sdhci.h> #include <plat/fimc-core.h> -#include <plat/s5p-time.h> +#include <plat/samsung-time.h> #include <plat/camport.h> #include <mach/map.h> @@ -97,6 +97,19 @@ static struct s3c2410_uartcfg universal_uartcfgs[] __initdata = { static struct regulator_consumer_supply max8952_consumer = REGULATOR_SUPPLY("vdd_arm", NULL); +static struct regulator_init_data universal_max8952_reg_data = { + .constraints = { + .name = "VARM_1.2V", + .min_uV = 770000, + .max_uV = 1400000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .always_on = 1, + .boot_on = 1, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &max8952_consumer, +}; + static struct max8952_platform_data universal_max8952_pdata __initdata = { .gpio_vid0 = EXYNOS4_GPX0(3), .gpio_vid1 = EXYNOS4_GPX0(4), @@ -105,19 +118,7 @@ static struct max8952_platform_data universal_max8952_pdata __initdata = { .dvs_mode = { 48, 32, 28, 18 }, /* 1.25, 1.20, 1.05, 0.95V */ .sync_freq = 0, /* default: fastest */ .ramp_speed = 0, /* default: fastest */ - - .reg_data = { - .constraints = { - .name = "VARM_1.2V", - .min_uV = 770000, - .max_uV = 1400000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, - .always_on = 1, - .boot_on = 1, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &max8952_consumer, - }, + .reg_data = &universal_max8952_reg_data, }; static struct regulator_consumer_supply lp3974_buck1_consumer = @@ -1092,9 +1093,10 @@ static struct platform_device *universal_devices[] __initdata = { static void __init universal_map_io(void) { exynos_init_io(NULL, 0); - s3c24xx_init_clocks(clk_xusbxti.rate); s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs)); - s5p_set_timer_source(S5P_PWM2, S5P_PWM4); + samsung_set_timer_source(SAMSUNG_PWM2, SAMSUNG_PWM4); + xxti_f = 0; + xusbxti_f = 24000000; } static void s5p_tv_setup(void) @@ -1152,7 +1154,7 @@ MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210") .map_io = universal_map_io, .init_machine = universal_machine_init, .init_late = exynos_init_late, - .init_time = s5p_timer_init, + .init_time = samsung_timer_init, .reserve = &universal_reserve, .restart = exynos4_restart, MACHINE_END diff --git a/arch/arm/mach-exynos/mct.c b/arch/arm/mach-exynos/mct.c deleted file mode 100644 index c9d6650f9b5d..000000000000 --- a/arch/arm/mach-exynos/mct.c +++ /dev/null @@ -1,485 +0,0 @@ -/* linux/arch/arm/mach-exynos4/mct.c - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS4 MCT(Multi-Core Timer) support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/clockchips.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/percpu.h> -#include <linux/of.h> - -#include <asm/arch_timer.h> -#include <asm/localtimer.h> - -#include <plat/cpu.h> - -#include <mach/map.h> -#include <mach/irqs.h> -#include <mach/regs-mct.h> -#include <asm/mach/time.h> - -#define TICK_BASE_CNT 1 - -enum { - MCT_INT_SPI, - MCT_INT_PPI -}; - -static unsigned long clk_rate; -static unsigned int mct_int_type; - -struct mct_clock_event_device { - struct clock_event_device *evt; - void __iomem *base; - char name[10]; -}; - -static void exynos4_mct_write(unsigned int value, void *addr) -{ - void __iomem *stat_addr; - u32 mask; - u32 i; - - __raw_writel(value, addr); - - if (likely(addr >= EXYNOS4_MCT_L_BASE(0))) { - u32 base = (u32) addr & EXYNOS4_MCT_L_MASK; - switch ((u32) addr & ~EXYNOS4_MCT_L_MASK) { - case (u32) MCT_L_TCON_OFFSET: - stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET; - mask = 1 << 3; /* L_TCON write status */ - break; - case (u32) MCT_L_ICNTB_OFFSET: - stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET; - mask = 1 << 1; /* L_ICNTB write status */ - break; - case (u32) MCT_L_TCNTB_OFFSET: - stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET; - mask = 1 << 0; /* L_TCNTB write status */ - break; - default: - return; - } - } else { - switch ((u32) addr) { - case (u32) EXYNOS4_MCT_G_TCON: - stat_addr = EXYNOS4_MCT_G_WSTAT; - mask = 1 << 16; /* G_TCON write status */ - break; - case (u32) EXYNOS4_MCT_G_COMP0_L: - stat_addr = EXYNOS4_MCT_G_WSTAT; - mask = 1 << 0; /* G_COMP0_L write status */ - break; - case (u32) EXYNOS4_MCT_G_COMP0_U: - stat_addr = EXYNOS4_MCT_G_WSTAT; - mask = 1 << 1; /* G_COMP0_U write status */ - break; - case (u32) EXYNOS4_MCT_G_COMP0_ADD_INCR: - stat_addr = EXYNOS4_MCT_G_WSTAT; - mask = 1 << 2; /* G_COMP0_ADD_INCR w status */ - break; - case (u32) EXYNOS4_MCT_G_CNT_L: - stat_addr = EXYNOS4_MCT_G_CNT_WSTAT; - mask = 1 << 0; /* G_CNT_L write status */ - break; - case (u32) EXYNOS4_MCT_G_CNT_U: - stat_addr = EXYNOS4_MCT_G_CNT_WSTAT; - mask = 1 << 1; /* G_CNT_U write status */ - break; - default: - return; - } - } - - /* Wait maximum 1 ms until written values are applied */ - for (i = 0; i < loops_per_jiffy / 1000 * HZ; i++) - if (__raw_readl(stat_addr) & mask) { - __raw_writel(mask, stat_addr); - return; - } - - panic("MCT hangs after writing %d (addr:0x%08x)\n", value, (u32)addr); -} - -/* Clocksource handling */ -static void exynos4_mct_frc_start(u32 hi, u32 lo) -{ - u32 reg; - - exynos4_mct_write(lo, EXYNOS4_MCT_G_CNT_L); - exynos4_mct_write(hi, EXYNOS4_MCT_G_CNT_U); - - reg = __raw_readl(EXYNOS4_MCT_G_TCON); - reg |= MCT_G_TCON_START; - exynos4_mct_write(reg, EXYNOS4_MCT_G_TCON); -} - -static cycle_t exynos4_frc_read(struct clocksource *cs) -{ - unsigned int lo, hi; - u32 hi2 = __raw_readl(EXYNOS4_MCT_G_CNT_U); - - do { - hi = hi2; - lo = __raw_readl(EXYNOS4_MCT_G_CNT_L); - hi2 = __raw_readl(EXYNOS4_MCT_G_CNT_U); - } while (hi != hi2); - - return ((cycle_t)hi << 32) | lo; -} - -static void exynos4_frc_resume(struct clocksource *cs) -{ - exynos4_mct_frc_start(0, 0); -} - -struct clocksource mct_frc = { - .name = "mct-frc", - .rating = 400, - .read = exynos4_frc_read, - .mask = CLOCKSOURCE_MASK(64), - .flags = CLOCK_SOURCE_IS_CONTINUOUS, - .resume = exynos4_frc_resume, -}; - -static void __init exynos4_clocksource_init(void) -{ - exynos4_mct_frc_start(0, 0); - - if (clocksource_register_hz(&mct_frc, clk_rate)) - panic("%s: can't register clocksource\n", mct_frc.name); -} - -static void exynos4_mct_comp0_stop(void) -{ - unsigned int tcon; - - tcon = __raw_readl(EXYNOS4_MCT_G_TCON); - tcon &= ~(MCT_G_TCON_COMP0_ENABLE | MCT_G_TCON_COMP0_AUTO_INC); - - exynos4_mct_write(tcon, EXYNOS4_MCT_G_TCON); - exynos4_mct_write(0, EXYNOS4_MCT_G_INT_ENB); -} - -static void exynos4_mct_comp0_start(enum clock_event_mode mode, - unsigned long cycles) -{ - unsigned int tcon; - cycle_t comp_cycle; - - tcon = __raw_readl(EXYNOS4_MCT_G_TCON); - - if (mode == CLOCK_EVT_MODE_PERIODIC) { - tcon |= MCT_G_TCON_COMP0_AUTO_INC; - exynos4_mct_write(cycles, EXYNOS4_MCT_G_COMP0_ADD_INCR); - } - - comp_cycle = exynos4_frc_read(&mct_frc) + cycles; - exynos4_mct_write((u32)comp_cycle, EXYNOS4_MCT_G_COMP0_L); - exynos4_mct_write((u32)(comp_cycle >> 32), EXYNOS4_MCT_G_COMP0_U); - - exynos4_mct_write(0x1, EXYNOS4_MCT_G_INT_ENB); - - tcon |= MCT_G_TCON_COMP0_ENABLE; - exynos4_mct_write(tcon , EXYNOS4_MCT_G_TCON); -} - -static int exynos4_comp_set_next_event(unsigned long cycles, - struct clock_event_device *evt) -{ - exynos4_mct_comp0_start(evt->mode, cycles); - - return 0; -} - -static void exynos4_comp_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) -{ - unsigned long cycles_per_jiffy; - exynos4_mct_comp0_stop(); - - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - cycles_per_jiffy = - (((unsigned long long) NSEC_PER_SEC / HZ * evt->mult) >> evt->shift); - exynos4_mct_comp0_start(mode, cycles_per_jiffy); - break; - - case CLOCK_EVT_MODE_ONESHOT: - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_SHUTDOWN: - case CLOCK_EVT_MODE_RESUME: - break; - } -} - -static struct clock_event_device mct_comp_device = { - .name = "mct-comp", - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .rating = 250, - .set_next_event = exynos4_comp_set_next_event, - .set_mode = exynos4_comp_set_mode, -}; - -static irqreturn_t exynos4_mct_comp_isr(int irq, void *dev_id) -{ - struct clock_event_device *evt = dev_id; - - exynos4_mct_write(0x1, EXYNOS4_MCT_G_INT_CSTAT); - - evt->event_handler(evt); - - return IRQ_HANDLED; -} - -static struct irqaction mct_comp_event_irq = { - .name = "mct_comp_irq", - .flags = IRQF_TIMER | IRQF_IRQPOLL, - .handler = exynos4_mct_comp_isr, - .dev_id = &mct_comp_device, -}; - -static void exynos4_clockevent_init(void) -{ - mct_comp_device.cpumask = cpumask_of(0); - clockevents_config_and_register(&mct_comp_device, clk_rate, - 0xf, 0xffffffff); - - if (soc_is_exynos5250()) - setup_irq(EXYNOS5_IRQ_MCT_G0, &mct_comp_event_irq); - else - setup_irq(EXYNOS4_IRQ_MCT_G0, &mct_comp_event_irq); -} - -#ifdef CONFIG_LOCAL_TIMERS - -static DEFINE_PER_CPU(struct mct_clock_event_device, percpu_mct_tick); - -/* Clock event handling */ -static void exynos4_mct_tick_stop(struct mct_clock_event_device *mevt) -{ - unsigned long tmp; - unsigned long mask = MCT_L_TCON_INT_START | MCT_L_TCON_TIMER_START; - void __iomem *addr = mevt->base + MCT_L_TCON_OFFSET; - - tmp = __raw_readl(addr); - if (tmp & mask) { - tmp &= ~mask; - exynos4_mct_write(tmp, addr); - } -} - -static void exynos4_mct_tick_start(unsigned long cycles, - struct mct_clock_event_device *mevt) -{ - unsigned long tmp; - - exynos4_mct_tick_stop(mevt); - - tmp = (1 << 31) | cycles; /* MCT_L_UPDATE_ICNTB */ - - /* update interrupt count buffer */ - exynos4_mct_write(tmp, mevt->base + MCT_L_ICNTB_OFFSET); - - /* enable MCT tick interrupt */ - exynos4_mct_write(0x1, mevt->base + MCT_L_INT_ENB_OFFSET); - - tmp = __raw_readl(mevt->base + MCT_L_TCON_OFFSET); - tmp |= MCT_L_TCON_INT_START | MCT_L_TCON_TIMER_START | - MCT_L_TCON_INTERVAL_MODE; - exynos4_mct_write(tmp, mevt->base + MCT_L_TCON_OFFSET); -} - -static int exynos4_tick_set_next_event(unsigned long cycles, - struct clock_event_device *evt) -{ - struct mct_clock_event_device *mevt = this_cpu_ptr(&percpu_mct_tick); - - exynos4_mct_tick_start(cycles, mevt); - - return 0; -} - -static inline void exynos4_tick_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) -{ - struct mct_clock_event_device *mevt = this_cpu_ptr(&percpu_mct_tick); - unsigned long cycles_per_jiffy; - - exynos4_mct_tick_stop(mevt); - - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - cycles_per_jiffy = - (((unsigned long long) NSEC_PER_SEC / HZ * evt->mult) >> evt->shift); - exynos4_mct_tick_start(cycles_per_jiffy, mevt); - break; - - case CLOCK_EVT_MODE_ONESHOT: - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_SHUTDOWN: - case CLOCK_EVT_MODE_RESUME: - break; - } -} - -static int exynos4_mct_tick_clear(struct mct_clock_event_device *mevt) -{ - struct clock_event_device *evt = mevt->evt; - - /* - * This is for supporting oneshot mode. - * Mct would generate interrupt periodically - * without explicit stopping. - */ - if (evt->mode != CLOCK_EVT_MODE_PERIODIC) - exynos4_mct_tick_stop(mevt); - - /* Clear the MCT tick interrupt */ - if (__raw_readl(mevt->base + MCT_L_INT_CSTAT_OFFSET) & 1) { - exynos4_mct_write(0x1, mevt->base + MCT_L_INT_CSTAT_OFFSET); - return 1; - } else { - return 0; - } -} - -static irqreturn_t exynos4_mct_tick_isr(int irq, void *dev_id) -{ - struct mct_clock_event_device *mevt = dev_id; - struct clock_event_device *evt = mevt->evt; - - exynos4_mct_tick_clear(mevt); - - evt->event_handler(evt); - - return IRQ_HANDLED; -} - -static struct irqaction mct_tick0_event_irq = { - .name = "mct_tick0_irq", - .flags = IRQF_TIMER | IRQF_NOBALANCING, - .handler = exynos4_mct_tick_isr, -}; - -static struct irqaction mct_tick1_event_irq = { - .name = "mct_tick1_irq", - .flags = IRQF_TIMER | IRQF_NOBALANCING, - .handler = exynos4_mct_tick_isr, -}; - -static int __cpuinit exynos4_local_timer_setup(struct clock_event_device *evt) -{ - struct mct_clock_event_device *mevt; - unsigned int cpu = smp_processor_id(); - int mct_lx_irq; - - mevt = this_cpu_ptr(&percpu_mct_tick); - mevt->evt = evt; - - mevt->base = EXYNOS4_MCT_L_BASE(cpu); - sprintf(mevt->name, "mct_tick%d", cpu); - - evt->name = mevt->name; - evt->cpumask = cpumask_of(cpu); - evt->set_next_event = exynos4_tick_set_next_event; - evt->set_mode = exynos4_tick_set_mode; - evt->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT; - evt->rating = 450; - clockevents_config_and_register(evt, clk_rate / (TICK_BASE_CNT + 1), - 0xf, 0x7fffffff); - - exynos4_mct_write(TICK_BASE_CNT, mevt->base + MCT_L_TCNTB_OFFSET); - - if (mct_int_type == MCT_INT_SPI) { - if (cpu == 0) { - mct_lx_irq = soc_is_exynos4210() ? EXYNOS4_IRQ_MCT_L0 : - EXYNOS5_IRQ_MCT_L0; - mct_tick0_event_irq.dev_id = mevt; - evt->irq = mct_lx_irq; - setup_irq(mct_lx_irq, &mct_tick0_event_irq); - } else { - mct_lx_irq = soc_is_exynos4210() ? EXYNOS4_IRQ_MCT_L1 : - EXYNOS5_IRQ_MCT_L1; - mct_tick1_event_irq.dev_id = mevt; - evt->irq = mct_lx_irq; - setup_irq(mct_lx_irq, &mct_tick1_event_irq); - irq_set_affinity(mct_lx_irq, cpumask_of(1)); - } - } else { - enable_percpu_irq(EXYNOS_IRQ_MCT_LOCALTIMER, 0); - } - - return 0; -} - -static void exynos4_local_timer_stop(struct clock_event_device *evt) -{ - unsigned int cpu = smp_processor_id(); - evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt); - if (mct_int_type == MCT_INT_SPI) - if (cpu == 0) - remove_irq(evt->irq, &mct_tick0_event_irq); - else - remove_irq(evt->irq, &mct_tick1_event_irq); - else - disable_percpu_irq(EXYNOS_IRQ_MCT_LOCALTIMER); -} - -static struct local_timer_ops exynos4_mct_tick_ops __cpuinitdata = { - .setup = exynos4_local_timer_setup, - .stop = exynos4_local_timer_stop, -}; -#endif /* CONFIG_LOCAL_TIMERS */ - -static void __init exynos4_timer_resources(void) -{ - struct clk *mct_clk; - mct_clk = clk_get(NULL, "xtal"); - - clk_rate = clk_get_rate(mct_clk); - -#ifdef CONFIG_LOCAL_TIMERS - if (mct_int_type == MCT_INT_PPI) { - int err; - - err = request_percpu_irq(EXYNOS_IRQ_MCT_LOCALTIMER, - exynos4_mct_tick_isr, "MCT", - &percpu_mct_tick); - WARN(err, "MCT: can't request IRQ %d (%d)\n", - EXYNOS_IRQ_MCT_LOCALTIMER, err); - } - - local_timer_register(&exynos4_mct_tick_ops); -#endif /* CONFIG_LOCAL_TIMERS */ -} - -void __init exynos4_timer_init(void) -{ - if (soc_is_exynos5440()) { - arch_timer_of_register(); - return; - } - - if ((soc_is_exynos4210()) || (soc_is_exynos5250())) - mct_int_type = MCT_INT_SPI; - else - mct_int_type = MCT_INT_PPI; - - exynos4_timer_resources(); - exynos4_clocksource_init(); - exynos4_clockevent_init(); -} diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index 60f7c5be057d..a0e8ff7758a4 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -20,11 +20,11 @@ #include <linux/jiffies.h> #include <linux/smp.h> #include <linux/io.h> -#include <linux/irqchip/arm-gic.h> #include <asm/cacheflush.h> #include <asm/smp_plat.h> #include <asm/smp_scu.h> +#include <asm/firmware.h> #include <mach/hardware.h> #include <mach/regs-clock.h> @@ -76,13 +76,6 @@ static DEFINE_SPINLOCK(boot_lock); static void __cpuinit exynos_secondary_init(unsigned int cpu) { /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); - - /* * let the primary processor know we're out of the * pen, then head off into the C entry point */ @@ -145,10 +138,21 @@ static int __cpuinit exynos_boot_secondary(unsigned int cpu, struct task_struct timeout = jiffies + (1 * HZ); while (time_before(jiffies, timeout)) { + unsigned long boot_addr; + smp_rmb(); - __raw_writel(virt_to_phys(exynos4_secondary_startup), - cpu_boot_reg(phys_cpu)); + boot_addr = virt_to_phys(exynos4_secondary_startup); + + /* + * Try to set boot address using firmware first + * and fall back to boot register if it fails. + */ + if (call_firmware_op(set_cpu_boot_addr, phys_cpu, boot_addr)) + __raw_writel(boot_addr, cpu_boot_reg(phys_cpu)); + + call_firmware_op(cpu_boot, phys_cpu); + arch_send_wakeup_ipi_mask(cpumask_of(cpu)); if (pen_release == -1) @@ -204,10 +208,20 @@ static void __init exynos_smp_prepare_cpus(unsigned int max_cpus) * system-wide flags register. The boot monitor waits * until it receives a soft interrupt, and then the * secondary CPU branches to this address. + * + * Try using firmware operation first and fall back to + * boot register if it fails. */ - for (i = 1; i < max_cpus; ++i) - __raw_writel(virt_to_phys(exynos4_secondary_startup), - cpu_boot_reg(cpu_logical_map(i))); + for (i = 1; i < max_cpus; ++i) { + unsigned long phys_cpu; + unsigned long boot_addr; + + phys_cpu = cpu_logical_map(i); + boot_addr = virt_to_phys(exynos4_secondary_startup); + + if (call_firmware_op(set_cpu_boot_addr, phys_cpu, boot_addr)) + __raw_writel(boot_addr, cpu_boot_reg(phys_cpu)); + } } struct smp_operations exynos_smp_ops __initdata = { diff --git a/arch/arm/mach-exynos/setup-sdhci-gpio.c b/arch/arm/mach-exynos/setup-sdhci-gpio.c index e8d08bf8965a..d5b98c866738 100644 --- a/arch/arm/mach-exynos/setup-sdhci-gpio.c +++ b/arch/arm/mach-exynos/setup-sdhci-gpio.c @@ -19,8 +19,8 @@ #include <linux/mmc/host.h> #include <linux/mmc/card.h> +#include <mach/gpio.h> #include <plat/gpio-cfg.h> -#include <plat/regs-sdhci.h> #include <plat/sdhci.h> void exynos4_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) diff --git a/arch/arm/mach-exynos/setup-usb-phy.c b/arch/arm/mach-exynos/setup-usb-phy.c index b81cc569a8dd..6af40662a449 100644 --- a/arch/arm/mach-exynos/setup-usb-phy.c +++ b/arch/arm/mach-exynos/setup-usb-phy.c @@ -204,9 +204,9 @@ static int exynos4210_usb_phy1_exit(struct platform_device *pdev) int s5p_usb_phy_init(struct platform_device *pdev, int type) { - if (type == S5P_USB_PHY_DEVICE) + if (type == USB_PHY_TYPE_DEVICE) return exynos4210_usb_phy0_init(pdev); - else if (type == S5P_USB_PHY_HOST) + else if (type == USB_PHY_TYPE_HOST) return exynos4210_usb_phy1_init(pdev); return -EINVAL; @@ -214,9 +214,9 @@ int s5p_usb_phy_init(struct platform_device *pdev, int type) int s5p_usb_phy_exit(struct platform_device *pdev, int type) { - if (type == S5P_USB_PHY_DEVICE) + if (type == USB_PHY_TYPE_DEVICE) return exynos4210_usb_phy0_exit(pdev); - else if (type == S5P_USB_PHY_HOST) + else if (type == USB_PHY_TYPE_HOST) return exynos4210_usb_phy1_exit(pdev); return -EINVAL; diff --git a/arch/arm/mach-exynos/smc.h b/arch/arm/mach-exynos/smc.h new file mode 100644 index 000000000000..13a1dc8ecbf2 --- /dev/null +++ b/arch/arm/mach-exynos/smc.h @@ -0,0 +1,31 @@ +/* + * Copyright (c) 2012 Samsung Electronics. + * + * EXYNOS - SMC Call + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_EXYNOS_SMC_H +#define __ASM_ARCH_EXYNOS_SMC_H + +#define SMC_CMD_INIT (-1) +#define SMC_CMD_INFO (-2) +/* For Power Management */ +#define SMC_CMD_SLEEP (-3) +#define SMC_CMD_CPU1BOOT (-4) +#define SMC_CMD_CPU0AFTR (-5) +/* For CP15 Access */ +#define SMC_CMD_C15RESUME (-11) +/* For L2 Cache Access */ +#define SMC_CMD_L2X0CTRL (-21) +#define SMC_CMD_L2X0SETUP1 (-22) +#define SMC_CMD_L2X0SETUP2 (-23) +#define SMC_CMD_L2X0INVALL (-24) +#define SMC_CMD_L2X0DEBUG (-25) + +extern void exynos_smc(u32 cmd, u32 arg1, u32 arg2, u32 arg3); + +#endif diff --git a/arch/arm/mach-gemini/Makefile b/arch/arm/mach-gemini/Makefile index 7355c0bbcb5e..7963a77be637 100644 --- a/arch/arm/mach-gemini/Makefile +++ b/arch/arm/mach-gemini/Makefile @@ -4,7 +4,7 @@ # Object file lists. -obj-y := irq.o mm.o time.o devices.o gpio.o idle.o +obj-y := irq.o mm.o time.o devices.o gpio.o idle.o reset.o # Board-specific support obj-$(CONFIG_MACH_NAS4220B) += board-nas4220b.o diff --git a/arch/arm/mach-gemini/board-nas4220b.c b/arch/arm/mach-gemini/board-nas4220b.c index 08bd650c42f3..ca8a25bb3521 100644 --- a/arch/arm/mach-gemini/board-nas4220b.c +++ b/arch/arm/mach-gemini/board-nas4220b.c @@ -103,4 +103,5 @@ MACHINE_START(NAS4220B, "Raidsonic NAS IB-4220-B") .init_irq = gemini_init_irq, .init_time = gemini_timer_init, .init_machine = ib4220b_init, + .restart = gemini_restart, MACHINE_END diff --git a/arch/arm/mach-gemini/board-rut1xx.c b/arch/arm/mach-gemini/board-rut1xx.c index fa0a36337f4d..7a675f88ffd6 100644 --- a/arch/arm/mach-gemini/board-rut1xx.c +++ b/arch/arm/mach-gemini/board-rut1xx.c @@ -14,6 +14,7 @@ #include <linux/leds.h> #include <linux/input.h> #include <linux/gpio_keys.h> +#include <linux/sizes.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -87,4 +88,5 @@ MACHINE_START(RUT100, "Teltonika RUT100") .init_irq = gemini_init_irq, .init_time = gemini_timer_init, .init_machine = rut1xx_init, + .restart = gemini_restart, MACHINE_END diff --git a/arch/arm/mach-gemini/board-wbd111.c b/arch/arm/mach-gemini/board-wbd111.c index 3321cd6cc1f3..418188cd1712 100644 --- a/arch/arm/mach-gemini/board-wbd111.c +++ b/arch/arm/mach-gemini/board-wbd111.c @@ -130,4 +130,5 @@ MACHINE_START(WBD111, "Wiliboard WBD-111") .init_irq = gemini_init_irq, .init_time = gemini_timer_init, .init_machine = wbd111_init, + .restart = gemini_restart, MACHINE_END diff --git a/arch/arm/mach-gemini/board-wbd222.c b/arch/arm/mach-gemini/board-wbd222.c index fe33c825fdaf..266b265090cd 100644 --- a/arch/arm/mach-gemini/board-wbd222.c +++ b/arch/arm/mach-gemini/board-wbd222.c @@ -130,4 +130,5 @@ MACHINE_START(WBD222, "Wiliboard WBD-222") .init_irq = gemini_init_irq, .init_time = gemini_timer_init, .init_machine = wbd222_init, + .restart = gemini_restart, MACHINE_END diff --git a/arch/arm/mach-gemini/common.h b/arch/arm/mach-gemini/common.h index 7670c39acb2f..38a45260a7c8 100644 --- a/arch/arm/mach-gemini/common.h +++ b/arch/arm/mach-gemini/common.h @@ -26,4 +26,6 @@ extern int platform_register_pflash(unsigned int size, struct mtd_partition *parts, unsigned int nr_parts); +extern void gemini_restart(char mode, const char *cmd); + #endif /* __GEMINI_COMMON_H__ */ diff --git a/arch/arm/mach-gemini/gpio.c b/arch/arm/mach-gemini/gpio.c index fdc7ef1391d3..70bfa571b24b 100644 --- a/arch/arm/mach-gemini/gpio.c +++ b/arch/arm/mach-gemini/gpio.c @@ -21,6 +21,7 @@ #include <mach/hardware.h> #include <mach/irqs.h> +#include <mach/gpio.h> #define GPIO_BASE(x) IO_ADDRESS(GEMINI_GPIO_BASE(x)) @@ -44,7 +45,7 @@ #define GPIO_PORT_NUM 3 -static void _set_gpio_irqenable(unsigned int base, unsigned int index, +static void _set_gpio_irqenable(void __iomem *base, unsigned int index, int enable) { unsigned int reg; @@ -57,7 +58,7 @@ static void _set_gpio_irqenable(unsigned int base, unsigned int index, static void gpio_ack_irq(struct irq_data *d) { unsigned int gpio = irq_to_gpio(d->irq); - unsigned int base = GPIO_BASE(gpio / 32); + void __iomem *base = GPIO_BASE(gpio / 32); __raw_writel(1 << (gpio % 32), base + GPIO_INT_CLR); } @@ -65,7 +66,7 @@ static void gpio_ack_irq(struct irq_data *d) static void gpio_mask_irq(struct irq_data *d) { unsigned int gpio = irq_to_gpio(d->irq); - unsigned int base = GPIO_BASE(gpio / 32); + void __iomem *base = GPIO_BASE(gpio / 32); _set_gpio_irqenable(base, gpio % 32, 0); } @@ -73,7 +74,7 @@ static void gpio_mask_irq(struct irq_data *d) static void gpio_unmask_irq(struct irq_data *d) { unsigned int gpio = irq_to_gpio(d->irq); - unsigned int base = GPIO_BASE(gpio / 32); + void __iomem *base = GPIO_BASE(gpio / 32); _set_gpio_irqenable(base, gpio % 32, 1); } @@ -82,7 +83,7 @@ static int gpio_set_irq_type(struct irq_data *d, unsigned int type) { unsigned int gpio = irq_to_gpio(d->irq); unsigned int gpio_mask = 1 << (gpio % 32); - unsigned int base = GPIO_BASE(gpio / 32); + void __iomem *base = GPIO_BASE(gpio / 32); unsigned int reg_both, reg_level, reg_type; reg_type = __raw_readl(base + GPIO_INT_TYPE); @@ -120,7 +121,7 @@ static int gpio_set_irq_type(struct irq_data *d, unsigned int type) __raw_writel(reg_level, base + GPIO_INT_LEVEL); __raw_writel(reg_both, base + GPIO_INT_BOTH_EDGE); - gpio_ack_irq(d->irq); + gpio_ack_irq(d); return 0; } @@ -153,7 +154,7 @@ static struct irq_chip gpio_irq_chip = { static void _set_gpio_direction(struct gpio_chip *chip, unsigned offset, int dir) { - unsigned int base = GPIO_BASE(offset / 32); + void __iomem *base = GPIO_BASE(offset / 32); unsigned int reg; reg = __raw_readl(base + GPIO_DIR); @@ -166,7 +167,7 @@ static void _set_gpio_direction(struct gpio_chip *chip, unsigned offset, static void gemini_gpio_set(struct gpio_chip *chip, unsigned offset, int value) { - unsigned int base = GPIO_BASE(offset / 32); + void __iomem *base = GPIO_BASE(offset / 32); if (value) __raw_writel(1 << (offset % 32), base + GPIO_DATA_SET); @@ -176,7 +177,7 @@ static void gemini_gpio_set(struct gpio_chip *chip, unsigned offset, int value) static int gemini_gpio_get(struct gpio_chip *chip, unsigned offset) { - unsigned int base = GPIO_BASE(offset / 32); + void __iomem *base = GPIO_BASE(offset / 32); return (__raw_readl(base + GPIO_DATA_IN) >> (offset % 32)) & 1; } diff --git a/arch/arm/mach-gemini/idle.c b/arch/arm/mach-gemini/idle.c index 92bbd6bb600a..87dff4f5059e 100644 --- a/arch/arm/mach-gemini/idle.c +++ b/arch/arm/mach-gemini/idle.c @@ -13,9 +13,11 @@ static void gemini_idle(void) * will never wakeup... Acctualy it is not very good to enable * interrupts first since scheduler can miss a tick, but there is * no other way around this. Platforms that needs it for power saving - * should call enable_hlt() in init code, since by default it is + * should enable it in init code, since by default it is * disabled. */ + + /* FIXME: Enabling interrupts here is racy! */ local_irq_enable(); cpu_do_idle(); } diff --git a/arch/arm/mach-gemini/include/mach/hardware.h b/arch/arm/mach-gemini/include/mach/hardware.h index 8c950e1d06be..98e7b0f286bf 100644 --- a/arch/arm/mach-gemini/include/mach/hardware.h +++ b/arch/arm/mach-gemini/include/mach/hardware.h @@ -69,6 +69,6 @@ /* * macro to get at IO space when running virtually */ -#define IO_ADDRESS(x) ((((x) & 0xFFF00000) >> 4) | ((x) & 0x000FFFFF) | 0xF0000000) +#define IO_ADDRESS(x) IOMEM((((x) & 0xFFF00000) >> 4) | ((x) & 0x000FFFFF) | 0xF0000000) #endif diff --git a/arch/arm/mach-gemini/irq.c b/arch/arm/mach-gemini/irq.c index 020852d3bdd8..44f50dcb616d 100644 --- a/arch/arm/mach-gemini/irq.c +++ b/arch/arm/mach-gemini/irq.c @@ -15,6 +15,8 @@ #include <linux/stddef.h> #include <linux/list.h> #include <linux/sched.h> +#include <linux/cpu.h> + #include <asm/irq.h> #include <asm/mach/irq.h> #include <asm/system_misc.h> @@ -65,8 +67,8 @@ static struct irq_chip gemini_irq_chip = { static struct resource irq_resource = { .name = "irq_handler", - .start = IO_ADDRESS(GEMINI_INTERRUPT_BASE), - .end = IO_ADDRESS(FIQ_STATUS(GEMINI_INTERRUPT_BASE)) + 4, + .start = GEMINI_INTERRUPT_BASE, + .end = FIQ_STATUS(GEMINI_INTERRUPT_BASE) + 4, }; void __init gemini_init_irq(void) @@ -77,7 +79,7 @@ void __init gemini_init_irq(void) * Disable the idle handler by default since it is buggy * For more info see arch/arm/mach-gemini/idle.c */ - disable_hlt(); + cpu_idle_poll_ctrl(true); request_resource(&iomem_resource, &irq_resource); diff --git a/arch/arm/mach-gemini/mm.c b/arch/arm/mach-gemini/mm.c index 51948242ec09..2c2cd284bb6a 100644 --- a/arch/arm/mach-gemini/mm.c +++ b/arch/arm/mach-gemini/mm.c @@ -19,57 +19,57 @@ /* Page table mapping for I/O region */ static struct map_desc gemini_io_desc[] __initdata = { { - .virtual = IO_ADDRESS(GEMINI_GLOBAL_BASE), + .virtual = (unsigned long)IO_ADDRESS(GEMINI_GLOBAL_BASE), .pfn =__phys_to_pfn(GEMINI_GLOBAL_BASE), .length = SZ_512K, .type = MT_DEVICE, }, { - .virtual = IO_ADDRESS(GEMINI_UART_BASE), + .virtual = (unsigned long)IO_ADDRESS(GEMINI_UART_BASE), .pfn = __phys_to_pfn(GEMINI_UART_BASE), .length = SZ_512K, .type = MT_DEVICE, }, { - .virtual = IO_ADDRESS(GEMINI_TIMER_BASE), + .virtual = (unsigned long)IO_ADDRESS(GEMINI_TIMER_BASE), .pfn = __phys_to_pfn(GEMINI_TIMER_BASE), .length = SZ_512K, .type = MT_DEVICE, }, { - .virtual = IO_ADDRESS(GEMINI_INTERRUPT_BASE), + .virtual = (unsigned long)IO_ADDRESS(GEMINI_INTERRUPT_BASE), .pfn = __phys_to_pfn(GEMINI_INTERRUPT_BASE), .length = SZ_512K, .type = MT_DEVICE, }, { - .virtual = IO_ADDRESS(GEMINI_POWER_CTRL_BASE), + .virtual = (unsigned long)IO_ADDRESS(GEMINI_POWER_CTRL_BASE), .pfn = __phys_to_pfn(GEMINI_POWER_CTRL_BASE), .length = SZ_512K, .type = MT_DEVICE, }, { - .virtual = IO_ADDRESS(GEMINI_GPIO_BASE(0)), + .virtual = (unsigned long)IO_ADDRESS(GEMINI_GPIO_BASE(0)), .pfn = __phys_to_pfn(GEMINI_GPIO_BASE(0)), .length = SZ_512K, .type = MT_DEVICE, }, { - .virtual = IO_ADDRESS(GEMINI_GPIO_BASE(1)), + .virtual = (unsigned long)IO_ADDRESS(GEMINI_GPIO_BASE(1)), .pfn = __phys_to_pfn(GEMINI_GPIO_BASE(1)), .length = SZ_512K, .type = MT_DEVICE, }, { - .virtual = IO_ADDRESS(GEMINI_GPIO_BASE(2)), + .virtual = (unsigned long)IO_ADDRESS(GEMINI_GPIO_BASE(2)), .pfn = __phys_to_pfn(GEMINI_GPIO_BASE(2)), .length = SZ_512K, .type = MT_DEVICE, }, { - .virtual = IO_ADDRESS(GEMINI_FLASH_CTRL_BASE), + .virtual = (unsigned long)IO_ADDRESS(GEMINI_FLASH_CTRL_BASE), .pfn = __phys_to_pfn(GEMINI_FLASH_CTRL_BASE), .length = SZ_512K, .type = MT_DEVICE, }, { - .virtual = IO_ADDRESS(GEMINI_DRAM_CTRL_BASE), + .virtual = (unsigned long)IO_ADDRESS(GEMINI_DRAM_CTRL_BASE), .pfn = __phys_to_pfn(GEMINI_DRAM_CTRL_BASE), .length = SZ_512K, .type = MT_DEVICE, }, { - .virtual = IO_ADDRESS(GEMINI_GENERAL_DMA_BASE), + .virtual = (unsigned long)IO_ADDRESS(GEMINI_GENERAL_DMA_BASE), .pfn = __phys_to_pfn(GEMINI_GENERAL_DMA_BASE), .length = SZ_512K, .type = MT_DEVICE, diff --git a/arch/arm/mach-gemini/include/mach/system.h b/arch/arm/mach-gemini/reset.c index a33b5a1f8ab4..b26659759e27 100644 --- a/arch/arm/mach-gemini/include/mach/system.h +++ b/arch/arm/mach-gemini/reset.c @@ -14,7 +14,7 @@ #include <mach/hardware.h> #include <mach/global_reg.h> -static inline void arch_reset(char mode, const char *cmd) +void gemini_restart(char mode, const char *cmd) { __raw_writel(RESET_GLOBAL | RESET_CPU1, IO_ADDRESS(GEMINI_GLOBAL_BASE) + GLOBAL_RESET); diff --git a/arch/arm/mach-h720x/Kconfig b/arch/arm/mach-h720x/Kconfig deleted file mode 100644 index 6bb755bcb6f5..000000000000 --- a/arch/arm/mach-h720x/Kconfig +++ /dev/null @@ -1,40 +0,0 @@ -if ARCH_H720X - -menu "h720x Implementations" - -config ARCH_H7201 - bool "gms30c7201" - depends on ARCH_H720X - select CPU_H7201 - select ZONE_DMA - help - Say Y here if you are using the Hynix GMS30C7201 Reference Board - -config ARCH_H7202 - bool "hms30c7202" - depends on ARCH_H720X - select CPU_H7202 - select ZONE_DMA - help - Say Y here if you are using the Hynix HMS30C7202 Reference Board - -endmenu - -config CPU_H7201 - bool - help - Select code specific to h7201 variants - -config CPU_H7202 - bool - help - Select code specific to h7202 variants -config H7202_SERIAL23 - depends on CPU_H7202 - bool "Use serial ports 2+3" - help - Say Y here if you wish to use serial ports 2+3. They share their - pins with the keyboard matrix controller, so you have to decide. - - -endif diff --git a/arch/arm/mach-h720x/Makefile b/arch/arm/mach-h720x/Makefile deleted file mode 100644 index e4cf728948eb..000000000000 --- a/arch/arm/mach-h720x/Makefile +++ /dev/null @@ -1,16 +0,0 @@ -# -# Makefile for the linux kernel. -# - -# Common support -obj-y := common.o -obj-m := -obj-n := -obj- := - -# Specific board support - -obj-$(CONFIG_ARCH_H7201) += h7201-eval.o -obj-$(CONFIG_ARCH_H7202) += h7202-eval.o -obj-$(CONFIG_CPU_H7201) += cpu-h7201.o -obj-$(CONFIG_CPU_H7202) += cpu-h7202.o diff --git a/arch/arm/mach-h720x/Makefile.boot b/arch/arm/mach-h720x/Makefile.boot deleted file mode 100644 index d875a7094dfe..000000000000 --- a/arch/arm/mach-h720x/Makefile.boot +++ /dev/null @@ -1,2 +0,0 @@ - zreladdr-$(CONFIG_ARCH_H720X) += 0x40008000 - diff --git a/arch/arm/mach-h720x/common.c b/arch/arm/mach-h720x/common.c deleted file mode 100644 index 17ef91fa3d56..000000000000 --- a/arch/arm/mach-h720x/common.c +++ /dev/null @@ -1,268 +0,0 @@ -/* - * linux/arch/arm/mach-h720x/common.c - * - * Copyright (C) 2003 Thomas Gleixner <tglx@linutronix.de> - * 2003 Robert Schwebel <r.schwebel@pengutronix.de> - * 2004 Sascha Hauer <s.hauer@pengutronix.de> - * - * common stuff for Hynix h720x processors - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/sched.h> -#include <linux/mman.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/io.h> - -#include <asm/page.h> -#include <asm/pgtable.h> -#include <asm/dma.h> -#include <mach/hardware.h> -#include <asm/irq.h> -#include <asm/system_misc.h> -#include <asm/mach/irq.h> -#include <asm/mach/map.h> -#include <mach/irqs.h> - -#include <asm/mach/dma.h> - -#if 0 -#define IRQDBG(args...) printk(args) -#else -#define IRQDBG(args...) do {} while(0) -#endif - -void __init arch_dma_init(dma_t *dma) -{ -} - -/* - * Return nsecs since last timer reload - * (timercount * (usecs perjiffie)) / (ticks per jiffie) - */ -u32 h720x_gettimeoffset(void) -{ - return ((CPU_REG(TIMER_VIRT, TM0_COUNT) * tick_usec) / LATCH) * 1000; -} - -/* - * mask Global irq's - */ -static void mask_global_irq(struct irq_data *d) -{ - CPU_REG (IRQC_VIRT, IRQC_IER) &= ~(1 << d->irq); -} - -/* - * unmask Global irq's - */ -static void unmask_global_irq(struct irq_data *d) -{ - CPU_REG (IRQC_VIRT, IRQC_IER) |= (1 << d->irq); -} - - -/* - * ack GPIO irq's - * Ack only for edge triggered int's valid - */ -static void inline ack_gpio_irq(struct irq_data *d) -{ - u32 reg_base = GPIO_VIRT(IRQ_TO_REGNO(d->irq)); - u32 bit = IRQ_TO_BIT(d->irq); - if ( (CPU_REG (reg_base, GPIO_EDGE) & bit)) - CPU_REG (reg_base, GPIO_CLR) = bit; -} - -/* - * mask GPIO irq's - */ -static void inline mask_gpio_irq(struct irq_data *d) -{ - u32 reg_base = GPIO_VIRT(IRQ_TO_REGNO(d->irq)); - u32 bit = IRQ_TO_BIT(d->irq); - CPU_REG (reg_base, GPIO_MASK) &= ~bit; -} - -/* - * unmask GPIO irq's - */ -static void inline unmask_gpio_irq(struct irq_data *d) -{ - u32 reg_base = GPIO_VIRT(IRQ_TO_REGNO(d->irq)); - u32 bit = IRQ_TO_BIT(d->irq); - CPU_REG (reg_base, GPIO_MASK) |= bit; -} - -static void -h720x_gpio_handler(unsigned int mask, unsigned int irq, - struct irq_desc *desc) -{ - IRQDBG("%s irq: %d\n", __func__, irq); - while (mask) { - if (mask & 1) { - IRQDBG("handling irq %d\n", irq); - generic_handle_irq(irq); - } - irq++; - mask >>= 1; - } -} - -static void -h720x_gpioa_demux_handler(unsigned int irq_unused, struct irq_desc *desc) -{ - unsigned int mask, irq; - - mask = CPU_REG(GPIO_A_VIRT,GPIO_STAT); - irq = IRQ_CHAINED_GPIOA(0); - IRQDBG("%s mask: 0x%08x irq: %d\n", __func__, mask,irq); - h720x_gpio_handler(mask, irq, desc); -} - -static void -h720x_gpiob_demux_handler(unsigned int irq_unused, struct irq_desc *desc) -{ - unsigned int mask, irq; - mask = CPU_REG(GPIO_B_VIRT,GPIO_STAT); - irq = IRQ_CHAINED_GPIOB(0); - IRQDBG("%s mask: 0x%08x irq: %d\n", __func__, mask,irq); - h720x_gpio_handler(mask, irq, desc); -} - -static void -h720x_gpioc_demux_handler(unsigned int irq_unused, struct irq_desc *desc) -{ - unsigned int mask, irq; - - mask = CPU_REG(GPIO_C_VIRT,GPIO_STAT); - irq = IRQ_CHAINED_GPIOC(0); - IRQDBG("%s mask: 0x%08x irq: %d\n", __func__, mask,irq); - h720x_gpio_handler(mask, irq, desc); -} - -static void -h720x_gpiod_demux_handler(unsigned int irq_unused, struct irq_desc *desc) -{ - unsigned int mask, irq; - - mask = CPU_REG(GPIO_D_VIRT,GPIO_STAT); - irq = IRQ_CHAINED_GPIOD(0); - IRQDBG("%s mask: 0x%08x irq: %d\n", __func__, mask,irq); - h720x_gpio_handler(mask, irq, desc); -} - -#ifdef CONFIG_CPU_H7202 -static void -h720x_gpioe_demux_handler(unsigned int irq_unused, struct irq_desc *desc) -{ - unsigned int mask, irq; - - mask = CPU_REG(GPIO_E_VIRT,GPIO_STAT); - irq = IRQ_CHAINED_GPIOE(0); - IRQDBG("%s mask: 0x%08x irq: %d\n", __func__, mask,irq); - h720x_gpio_handler(mask, irq, desc); -} -#endif - -static struct irq_chip h720x_global_chip = { - .irq_ack = mask_global_irq, - .irq_mask = mask_global_irq, - .irq_unmask = unmask_global_irq, -}; - -static struct irq_chip h720x_gpio_chip = { - .irq_ack = ack_gpio_irq, - .irq_mask = mask_gpio_irq, - .irq_unmask = unmask_gpio_irq, -}; - -/* - * Initialize IRQ's, mask all, enable multiplexed irq's - */ -void __init h720x_init_irq (void) -{ - int irq; - - /* Mask global irq's */ - CPU_REG (IRQC_VIRT, IRQC_IER) = 0x0; - - /* Mask all multiplexed irq's */ - CPU_REG (GPIO_A_VIRT, GPIO_MASK) = 0x0; - CPU_REG (GPIO_B_VIRT, GPIO_MASK) = 0x0; - CPU_REG (GPIO_C_VIRT, GPIO_MASK) = 0x0; - CPU_REG (GPIO_D_VIRT, GPIO_MASK) = 0x0; - - /* Initialize global IRQ's, fast path */ - for (irq = 0; irq < NR_GLBL_IRQS; irq++) { - irq_set_chip_and_handler(irq, &h720x_global_chip, - handle_level_irq); - set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); - } - - /* Initialize multiplexed IRQ's, slow path */ - for (irq = IRQ_CHAINED_GPIOA(0) ; irq <= IRQ_CHAINED_GPIOD(31); irq++) { - irq_set_chip_and_handler(irq, &h720x_gpio_chip, - handle_edge_irq); - set_irq_flags(irq, IRQF_VALID ); - } - irq_set_chained_handler(IRQ_GPIOA, h720x_gpioa_demux_handler); - irq_set_chained_handler(IRQ_GPIOB, h720x_gpiob_demux_handler); - irq_set_chained_handler(IRQ_GPIOC, h720x_gpioc_demux_handler); - irq_set_chained_handler(IRQ_GPIOD, h720x_gpiod_demux_handler); - -#ifdef CONFIG_CPU_H7202 - for (irq = IRQ_CHAINED_GPIOE(0) ; irq <= IRQ_CHAINED_GPIOE(31); irq++) { - irq_set_chip_and_handler(irq, &h720x_gpio_chip, - handle_edge_irq); - set_irq_flags(irq, IRQF_VALID ); - } - irq_set_chained_handler(IRQ_GPIOE, h720x_gpioe_demux_handler); -#endif - - /* Enable multiplexed irq's */ - CPU_REG (IRQC_VIRT, IRQC_IER) = IRQ_ENA_MUX; -} - -static struct map_desc h720x_io_desc[] __initdata = { - { - .virtual = IO_VIRT, - .pfn = __phys_to_pfn(IO_PHYS), - .length = IO_SIZE, - .type = MT_DEVICE - }, -}; - -/* Initialize io tables */ -void __init h720x_map_io(void) -{ - iotable_init(h720x_io_desc,ARRAY_SIZE(h720x_io_desc)); -} - -void h720x_restart(char mode, const char *cmd) -{ - CPU_REG (PMU_BASE, PMU_STAT) |= PMU_WARMRESET; -} - -static void h720x__idle(void) -{ - CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_IDLE; - nop(); - nop(); - CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_RUN; - nop(); - nop(); -} - -static int __init h720x_idle_init(void) -{ - arm_pm_idle = h720x__idle; - return 0; -} - -arch_initcall(h720x_idle_init); diff --git a/arch/arm/mach-h720x/common.h b/arch/arm/mach-h720x/common.h deleted file mode 100644 index 7e738410ca93..000000000000 --- a/arch/arm/mach-h720x/common.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * linux/arch/arm/mach-h720x/common.h - * - * Copyright (C) 2003 Thomas Gleixner <tglx@linutronix.de> - * 2003 Robert Schwebel <r.schwebel@pengutronix.de> - * 2004 Sascha Hauer <s.hauer@pengutronix.de> - * - * Architecture specific stuff for Hynix GMS30C7201 development board - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -extern u32 h720x_gettimeoffset(void); -extern void __init h720x_init_irq(void); -extern void __init h720x_map_io(void); -extern void h720x_restart(char, const char *); - -#ifdef CONFIG_ARCH_H7202 -extern void h7202_timer_init(void); -extern void __init init_hw_h7202(void); -extern void __init h7202_init_irq(void); -extern void __init h7202_init_time(void); -#endif - -#ifdef CONFIG_ARCH_H7201 -extern void h7201_timer_init(void); -#endif diff --git a/arch/arm/mach-h720x/cpu-h7201.c b/arch/arm/mach-h720x/cpu-h7201.c deleted file mode 100644 index 13c741215387..000000000000 --- a/arch/arm/mach-h720x/cpu-h7201.c +++ /dev/null @@ -1,57 +0,0 @@ -/* - * linux/arch/arm/mach-h720x/cpu-h7201.c - * - * Copyright (C) 2003 Thomas Gleixner <tglx@linutronix.de> - * 2003 Robert Schwebel <r.schwebel@pengutronix.de> - * 2004 Sascha Hauer <s.hauer@pengutronix.de> - * - * processor specific stuff for the Hynix h7201 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/module.h> -#include <asm/types.h> -#include <mach/hardware.h> -#include <asm/irq.h> -#include <mach/irqs.h> -#include <asm/mach/irq.h> -#include <asm/mach/time.h> -#include "common.h" -/* - * Timer interrupt handler - */ -static irqreturn_t -h7201_timer_interrupt(int irq, void *dev_id) -{ - CPU_REG (TIMER_VIRT, TIMER_TOPSTAT); - timer_tick(); - - return IRQ_HANDLED; -} - -static struct irqaction h7201_timer_irq = { - .name = "h7201 Timer Tick", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = h7201_timer_interrupt, -}; - -/* - * Setup TIMER0 as system timer - */ -void __init h7201_timer_init(void) -{ - arch_gettimeoffset = h720x_gettimeoffset; - - CPU_REG (TIMER_VIRT, TM0_PERIOD) = LATCH; - CPU_REG (TIMER_VIRT, TM0_CTRL) = TM_RESET; - CPU_REG (TIMER_VIRT, TM0_CTRL) = TM_REPEAT | TM_START; - CPU_REG (TIMER_VIRT, TIMER_TOPCTRL) = ENABLE_TM0_INTR | TIMER_ENABLE_BIT; - - setup_irq(IRQ_TIMER0, &h7201_timer_irq); -} diff --git a/arch/arm/mach-h720x/cpu-h7202.c b/arch/arm/mach-h720x/cpu-h7202.c deleted file mode 100644 index e2ae7e898f9d..000000000000 --- a/arch/arm/mach-h720x/cpu-h7202.c +++ /dev/null @@ -1,225 +0,0 @@ -/* - * linux/arch/arm/mach-h720x/cpu-h7202.c - * - * Copyright (C) 2003 Thomas Gleixner <tglx@linutronix.de> - * 2003 Robert Schwebel <r.schwebel@pengutronix.de> - * 2004 Sascha Hauer <s.hauer@pengutronix.de> - * - * processor specific stuff for the Hynix h7202 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/module.h> -#include <asm/types.h> -#include <mach/hardware.h> -#include <asm/irq.h> -#include <mach/irqs.h> -#include <asm/mach/irq.h> -#include <asm/mach/time.h> -#include <linux/device.h> -#include <linux/serial_8250.h> -#include "common.h" - -static struct resource h7202ps2_resources[] = { - [0] = { - .start = 0x8002c000, - .end = 0x8002c040, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_PS2, - .end = IRQ_PS2, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device h7202ps2_device = { - .name = "h7202ps2", - .id = -1, - .num_resources = ARRAY_SIZE(h7202ps2_resources), - .resource = h7202ps2_resources, -}; - -static struct plat_serial8250_port serial_platform_data[] = { - { - .membase = (void*)SERIAL0_VIRT, - .mapbase = SERIAL0_BASE, - .irq = IRQ_UART0, - .uartclk = 2*1843200, - .regshift = 2, - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, - }, - { - .membase = (void*)SERIAL1_VIRT, - .mapbase = SERIAL1_BASE, - .irq = IRQ_UART1, - .uartclk = 2*1843200, - .regshift = 2, - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, - }, -#ifdef CONFIG_H7202_SERIAL23 - { - .membase = (void*)SERIAL2_VIRT, - .mapbase = SERIAL2_BASE, - .irq = IRQ_UART2, - .uartclk = 2*1843200, - .regshift = 2, - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, - }, - { - .membase = (void*)SERIAL3_VIRT, - .mapbase = SERIAL3_BASE, - .irq = IRQ_UART3, - .uartclk = 2*1843200, - .regshift = 2, - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, - }, -#endif - { }, -}; - -static struct platform_device serial_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = serial_platform_data, - }, -}; - -static struct platform_device *devices[] __initdata = { - &h7202ps2_device, - &serial_device, -}; - -/* Although we have two interrupt lines for the timers, we only have one - * status register which clears all pending timer interrupts on reading. So - * we have to handle all timer interrupts in one place. - */ -static void -h7202_timerx_demux_handler(unsigned int irq_unused, struct irq_desc *desc) -{ - unsigned int mask, irq; - - mask = CPU_REG (TIMER_VIRT, TIMER_TOPSTAT); - - if ( mask & TSTAT_T0INT ) { - timer_tick(); - if( mask == TSTAT_T0INT ) - return; - } - - mask >>= 1; - irq = IRQ_TIMER1; - while (mask) { - if (mask & 1) - generic_handle_irq(irq); - irq++; - mask >>= 1; - } -} - -/* - * Timer interrupt handler - */ -static irqreturn_t -h7202_timer_interrupt(int irq, void *dev_id) -{ - h7202_timerx_demux_handler(0, NULL); - return IRQ_HANDLED; -} - -/* - * mask multiplexed timer IRQs - */ -static void inline __mask_timerx_irq(unsigned int irq) -{ - unsigned int bit; - bit = 2 << ((irq == IRQ_TIMER64B) ? 4 : (irq - IRQ_TIMER1)); - CPU_REG (TIMER_VIRT, TIMER_TOPCTRL) &= ~bit; -} - -static void inline mask_timerx_irq(struct irq_data *d) -{ - __mask_timerx_irq(d->irq); -} - -/* - * unmask multiplexed timer IRQs - */ -static void inline unmask_timerx_irq(struct irq_data *d) -{ - unsigned int bit; - bit = 2 << ((d->irq == IRQ_TIMER64B) ? 4 : (d->irq - IRQ_TIMER1)); - CPU_REG (TIMER_VIRT, TIMER_TOPCTRL) |= bit; -} - -static struct irq_chip h7202_timerx_chip = { - .irq_ack = mask_timerx_irq, - .irq_mask = mask_timerx_irq, - .irq_unmask = unmask_timerx_irq, -}; - -static struct irqaction h7202_timer_irq = { - .name = "h7202 Timer Tick", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = h7202_timer_interrupt, -}; - -/* - * Setup TIMER0 as system timer - */ -void __init h7202_timer_init(void) -{ - arch_gettimeoffset = h720x_gettimeoffset; - - CPU_REG (TIMER_VIRT, TM0_PERIOD) = LATCH; - CPU_REG (TIMER_VIRT, TM0_CTRL) = TM_RESET; - CPU_REG (TIMER_VIRT, TM0_CTRL) = TM_REPEAT | TM_START; - CPU_REG (TIMER_VIRT, TIMER_TOPCTRL) = ENABLE_TM0_INTR | TIMER_ENABLE_BIT; - - setup_irq(IRQ_TIMER0, &h7202_timer_irq); -} - -void __init h7202_init_irq (void) -{ - int irq; - - CPU_REG (GPIO_E_VIRT, GPIO_MASK) = 0x0; - - for (irq = IRQ_TIMER1; - irq < IRQ_CHAINED_TIMERX(NR_TIMERX_IRQS); irq++) { - __mask_timerx_irq(irq); - irq_set_chip_and_handler(irq, &h7202_timerx_chip, - handle_edge_irq); - set_irq_flags(irq, IRQF_VALID ); - } - irq_set_chained_handler(IRQ_TIMERX, h7202_timerx_demux_handler); - - h720x_init_irq(); -} - -void __init init_hw_h7202(void) -{ - /* Enable clocks */ - CPU_REG (PMU_BASE, PMU_PLL_CTRL) |= PLL_2_EN | PLL_1_EN | PLL_3_MUTE; - - CPU_REG (SERIAL0_VIRT, SERIAL_ENABLE) = SERIAL_ENABLE_EN; - CPU_REG (SERIAL1_VIRT, SERIAL_ENABLE) = SERIAL_ENABLE_EN; -#ifdef CONFIG_H7202_SERIAL23 - CPU_REG (SERIAL2_VIRT, SERIAL_ENABLE) = SERIAL_ENABLE_EN; - CPU_REG (SERIAL3_VIRT, SERIAL_ENABLE) = SERIAL_ENABLE_EN; - CPU_IO (GPIO_AMULSEL) = AMULSEL_USIN2 | AMULSEL_USOUT2 | - AMULSEL_USIN3 | AMULSEL_USOUT3; -#endif - (void) platform_add_devices(devices, ARRAY_SIZE(devices)); -} diff --git a/arch/arm/mach-h720x/h7201-eval.c b/arch/arm/mach-h720x/h7201-eval.c deleted file mode 100644 index 4fdeb686c0a9..000000000000 --- a/arch/arm/mach-h720x/h7201-eval.c +++ /dev/null @@ -1,38 +0,0 @@ -/* - * linux/arch/arm/mach-h720x/h7201-eval.c - * - * Copyright (C) 2003 Thomas Gleixner <tglx@linutronix.de> - * 2003 Robert Schwebel <r.schwebel@pengutronix.de> - * 2004 Sascha Hauer <s.hauer@pengutronix.de> - * - * Architecture specific stuff for Hynix GMS30C7201 development board - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/string.h> -#include <linux/device.h> - -#include <asm/setup.h> -#include <asm/types.h> -#include <asm/mach-types.h> -#include <asm/page.h> -#include <asm/mach/arch.h> -#include <mach/hardware.h> -#include "common.h" - -MACHINE_START(H7201, "Hynix GMS30C7201") - /* Maintainer: Robert Schwebel, Pengutronix */ - .atag_offset = 0x1000, - .map_io = h720x_map_io, - .init_irq = h720x_init_irq, - .init_time = h7201_timer_init, - .dma_zone_size = SZ_256M, - .restart = h720x_restart, -MACHINE_END diff --git a/arch/arm/mach-h720x/h7202-eval.c b/arch/arm/mach-h720x/h7202-eval.c deleted file mode 100644 index f68e967a2062..000000000000 --- a/arch/arm/mach-h720x/h7202-eval.c +++ /dev/null @@ -1,81 +0,0 @@ -/* - * linux/arch/arm/mach-h720x/h7202-eval.c - * - * Copyright (C) 2003 Thomas Gleixner <tglx@linutronix.de> - * 2003 Robert Schwebel <r.schwebel@pengutronix.de> - * 2004 Sascha Hauer <s.hauer@pengutronix.de> - * - * Architecture specific stuff for Hynix HMS30C7202 development board - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/string.h> -#include <linux/platform_device.h> - -#include <asm/setup.h> -#include <asm/types.h> -#include <asm/mach-types.h> -#include <asm/page.h> -#include <asm/mach/arch.h> -#include <mach/irqs.h> -#include <mach/hardware.h> -#include "common.h" - -static struct resource cirrus_resources[] = { - [0] = { - .start = ETH0_PHYS + 0x300, - .end = ETH0_PHYS + 0x300 + 0x10, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_CHAINED_GPIOB(8), - .end = IRQ_CHAINED_GPIOB(8), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device cirrus_device = { - .name = "cirrus-cs89x0", - .id = -1, - .num_resources = ARRAY_SIZE(cirrus_resources), - .resource = cirrus_resources, -}; - -static struct platform_device *devices[] __initdata = { - &cirrus_device, -}; - -/* - * Hardware init. This is called early in initcalls - * Place pin inits here. So you avoid adding ugly - * #ifdef stuff to common drivers. - * Use this only, if your bootloader is not able - * to initialize the pins proper. - */ -static void __init init_eval_h7202(void) -{ - init_hw_h7202(); - (void) platform_add_devices(devices, ARRAY_SIZE(devices)); - - /* Enable interrupt on portb bit 8 (ethernet) */ - CPU_REG (GPIO_B_VIRT, GPIO_POL) &= ~(1 << 8); - CPU_REG (GPIO_B_VIRT, GPIO_EN) |= (1 << 8); -} - -MACHINE_START(H7202, "Hynix HMS30C7202") - /* Maintainer: Robert Schwebel, Pengutronix */ - .atag_offset = 0x100, - .map_io = h720x_map_io, - .init_irq = h7202_init_irq, - .init_time = h7202_timer_init, - .init_machine = init_eval_h7202, - .dma_zone_size = SZ_256M, - .restart = h720x_restart, -MACHINE_END diff --git a/arch/arm/mach-h720x/include/mach/boards.h b/arch/arm/mach-h720x/include/mach/boards.h deleted file mode 100644 index 38b8e0d61fbf..000000000000 --- a/arch/arm/mach-h720x/include/mach/boards.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * arch/arm/mach-h720x/include/mach/boards.h - * - * Copyright (C) 2003 Thomas Gleixner <tglx@linutronix.de> - * (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de> - * - * This file contains the board specific defines for various devices - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_HARDWARE_INCMACH_H -#error Do not include this file directly. Include asm/hardware.h instead ! -#endif - -/* Hynix H7202 developer board specific device defines */ -#ifdef CONFIG_ARCH_H7202 - -/* FLASH */ -#define H720X_FLASH_VIRT 0xd0000000 -#define H720X_FLASH_PHYS 0x00000000 -#define H720X_FLASH_SIZE 0x02000000 - -/* onboard LAN controller */ -# define ETH0_PHYS 0x08000000 - -/* Touch screen defines */ -/* GPIO Port */ -#define PEN_GPIO GPIO_B_VIRT -/* Bitmask for pen down interrupt */ -#define PEN_INT_BIT (1<<7) -/* Bitmask for pen up interrupt */ -#define PEN_ENA_BIT (1<<6) -/* pen up interrupt */ -#define IRQ_PEN IRQ_MUX_GPIOB(7) - -#endif - -/* Hynix H7201 developer board specific device defines */ -#if defined (CONFIG_ARCH_H7201) -/* ROM DISK SPACE */ -#define ROM_DISK_BASE 0xc1800000 -#define ROM_DISK_START 0x41800000 -#define ROM_DISK_SIZE 0x00700000 - -/* SRAM DISK SPACE */ -#define SRAM_DISK_BASE 0xf1000000 -#define SRAM_DISK_START 0x04000000 -#define SRAM_DISK_SIZE 0x00400000 -#endif - diff --git a/arch/arm/mach-h720x/include/mach/debug-macro.S b/arch/arm/mach-h720x/include/mach/debug-macro.S deleted file mode 100644 index 8a46157b0582..000000000000 --- a/arch/arm/mach-h720x/include/mach/debug-macro.S +++ /dev/null @@ -1,40 +0,0 @@ -/* arch/arm/mach-h720x/include/mach/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - -#include <mach/hardware.h> - - .equ io_virt, IO_VIRT - .equ io_phys, IO_PHYS - - .macro addruart, rp, rv, tmp - mov \rp, #0x00020000 @ UART1 - add \rv, \rp, #io_virt @ virtual address - add \rp, \rp, #io_phys @ physical base address - .endm - - .macro senduart,rd,rx - str \rd, [\rx, #0x0] @ UARTDR - - .endm - - .macro waituart,rd,rx -1001: ldr \rd, [\rx, #0x18] @ UARTFLG - tst \rd, #1 << 5 @ UARTFLGUTXFF - 1 when full - bne 1001b - .endm - - .macro busyuart,rd,rx -1001: ldr \rd, [\rx, #0x18] @ UARTFLG - tst \rd, #1 << 3 @ UARTFLGUBUSY - 1 when busy - bne 1001b - .endm diff --git a/arch/arm/mach-h720x/include/mach/entry-macro.S b/arch/arm/mach-h720x/include/mach/entry-macro.S deleted file mode 100644 index 75267fad7012..000000000000 --- a/arch/arm/mach-h720x/include/mach/entry-macro.S +++ /dev/null @@ -1,57 +0,0 @@ -/* - * arch/arm/mach-h720x/include/mach/entry-macro.S - * - * Low-level IRQ helper macros for Hynix HMS720x based platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp -#if defined (CONFIG_CPU_H7201) || defined (CONFIG_CPU_H7202) - @ we could use the id register on H7202, but this is not - @ properly updated when we come back from asm_do_irq - @ without a previous return from interrupt - @ (see loops below in irq_svc, irq_usr) - @ We see unmasked pending ints only, as the masked pending ints - @ are not visible here - - mov \base, #0xf0000000 @ base register - orr \base, \base, #0x24000 @ irqbase - ldr \irqstat, [\base, #0x04] @ get interrupt status -#if defined (CONFIG_CPU_H7201) - ldr \tmp, =0x001fffff -#else - mvn \tmp, #0xc0000000 -#endif - and \irqstat, \irqstat, \tmp @ mask out unused ints - mov \irqnr, #0 - - mov \tmp, #0xff00 - orr \tmp, \tmp, #0xff - tst \irqstat, \tmp - addeq \irqnr, \irqnr, #16 - moveq \irqstat, \irqstat, lsr #16 - tst \irqstat, #255 - addeq \irqnr, \irqnr, #8 - moveq \irqstat, \irqstat, lsr #8 - tst \irqstat, #15 - addeq \irqnr, \irqnr, #4 - moveq \irqstat, \irqstat, lsr #4 - tst \irqstat, #3 - addeq \irqnr, \irqnr, #2 - moveq \irqstat, \irqstat, lsr #2 - tst \irqstat, #1 - addeq \irqnr, \irqnr, #1 - moveq \irqstat, \irqstat, lsr #1 - tst \irqstat, #1 @ bit 0 should be set - .endm - -#else -#error hynix processor selection missmatch -#endif - diff --git a/arch/arm/mach-h720x/include/mach/h7201-regs.h b/arch/arm/mach-h720x/include/mach/h7201-regs.h deleted file mode 100644 index 611b4947ccfc..000000000000 --- a/arch/arm/mach-h720x/include/mach/h7201-regs.h +++ /dev/null @@ -1,67 +0,0 @@ -/* - * arch/arm/mach-h720x/include/mach/h7201-regs.h - * - * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc. - * (C) 2003 Thomas Gleixner <tglx@linutronix.de> - * (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de> - * (C) 2004 Sascha Hauer <s.hauer@pengutronix.de> - * - * This file contains the hardware definitions of the h720x processors - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Do not add implementations specific defines here. This files contains - * only defines of the onchip peripherals. Add those defines to boards.h, - * which is included by this file. - */ - -#define SERIAL2_VIRT (IO_VIRT + 0x50100) -#define SERIAL3_VIRT (IO_VIRT + 0x50200) - -/* - * PCMCIA - */ -#define PCMCIA0_ATT_BASE 0xe5000000 -#define PCMCIA0_ATT_SIZE 0x00200000 -#define PCMCIA0_ATT_START 0x20000000 -#define PCMCIA0_MEM_BASE 0xe5200000 -#define PCMCIA0_MEM_SIZE 0x00200000 -#define PCMCIA0_MEM_START 0x24000000 -#define PCMCIA0_IO_BASE 0xe5400000 -#define PCMCIA0_IO_SIZE 0x00200000 -#define PCMCIA0_IO_START 0x28000000 - -#define PCMCIA1_ATT_BASE 0xe5600000 -#define PCMCIA1_ATT_SIZE 0x00200000 -#define PCMCIA1_ATT_START 0x30000000 -#define PCMCIA1_MEM_BASE 0xe5800000 -#define PCMCIA1_MEM_SIZE 0x00200000 -#define PCMCIA1_MEM_START 0x34000000 -#define PCMCIA1_IO_BASE 0xe5a00000 -#define PCMCIA1_IO_SIZE 0x00200000 -#define PCMCIA1_IO_START 0x38000000 - -#define PRIME3C_BASE 0xf0050000 -#define PRIME3C_SIZE 0x00001000 -#define PRIME3C_START 0x10000000 - -/* VGA Controller */ -#define VGA_RAMBASE 0x50 -#define VGA_TIMING0 0x60 -#define VGA_TIMING1 0x64 -#define VGA_TIMING2 0x68 -#define VGA_TIMING3 0x6c - -#define LCD_CTRL_VGA_ENABLE 0x00000100 -#define LCD_CTRL_VGA_BPP_MASK 0x00000600 -#define LCD_CTRL_VGA_4BPP 0x00000000 -#define LCD_CTRL_VGA_8BPP 0x00000200 -#define LCD_CTRL_VGA_16BPP 0x00000300 -#define LCD_CTRL_SHARE_DMA 0x00000800 -#define LCD_CTRL_VDE 0x00100000 -#define LCD_CTRL_LPE 0x00400000 /* LCD Power enable */ -#define LCD_CTRL_BLE 0x00800000 /* LCD backlight enable */ - -#define VGA_PALETTE_BASE (IO_VIRT + 0x10800) diff --git a/arch/arm/mach-h720x/include/mach/h7202-regs.h b/arch/arm/mach-h720x/include/mach/h7202-regs.h deleted file mode 100644 index 17c12eb34995..000000000000 --- a/arch/arm/mach-h720x/include/mach/h7202-regs.h +++ /dev/null @@ -1,155 +0,0 @@ -/* - * arch/arm/mach-h720x/include/mach/h7202-regs.h - * - * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc. - * (C) 2003 Thomas Gleixner <tglx@linutronix.de> - * (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de> - * (C) 2004 Sascha Hauer <s.hauer@pengutronix.de> - * - * This file contains the hardware definitions of the h720x processors - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Do not add implementations specific defines here. This files contains - * only defines of the onchip peripherals. Add those defines to boards.h, - * which is included by this file. - */ - -#define SERIAL2_OFS 0x2d000 -#define SERIAL2_BASE (IO_PHYS + SERIAL2_OFS) -#define SERIAL2_VIRT (IO_VIRT + SERIAL2_OFS) -#define SERIAL3_OFS 0x2e000 -#define SERIAL3_BASE (IO_PHYS + SERIAL3_OFS) -#define SERIAL3_VIRT (IO_VIRT + SERIAL3_OFS) - -/* Matrix Keyboard Controller */ -#define KBD_VIRT (IO_VIRT + 0x22000) -#define KBD_KBCR 0x00 -#define KBD_KBSC 0x04 -#define KBD_KBTR 0x08 -#define KBD_KBVR0 0x0C -#define KBD_KBVR1 0x10 -#define KBD_KBSR 0x18 - -#define KBD_KBCR_SCANENABLE (1 << 7) -#define KBD_KBCR_NPOWERDOWN (1 << 2) -#define KBD_KBCR_CLKSEL_MASK (3) -#define KBD_KBCR_CLKSEL_PCLK2 0x0 -#define KBD_KBCR_CLKSEL_PCLK128 0x1 -#define KBD_KBCR_CLKSEL_PCLK256 0x2 -#define KBD_KBCR_CLKSEL_PCLK512 0x3 - -#define KBD_KBSR_INTR (1 << 0) -#define KBD_KBSR_WAKEUP (1 << 1) - -/* USB device controller */ - -#define USBD_BASE (IO_VIRT + 0x12000) -#define USBD_LENGTH 0x3C - -#define USBD_GCTRL 0x00 -#define USBD_EPCTRL 0x04 -#define USBD_INTMASK 0x08 -#define USBD_INTSTAT 0x0C -#define USBD_PWR 0x10 -#define USBD_DMARXTX 0x14 -#define USBD_DEVID 0x18 -#define USBD_DEVCLASS 0x1C -#define USBD_INTCLASS 0x20 -#define USBD_SETUP0 0x24 -#define USBD_SETUP1 0x28 -#define USBD_ENDP0RD 0x2C -#define USBD_ENDP0WT 0x30 -#define USBD_ENDP1RD 0x34 -#define USBD_ENDP2WT 0x38 - -/* PS/2 port */ -#define PSDATA 0x00 -#define PSSTAT 0x04 -#define PSSTAT_TXEMPTY (1<<0) -#define PSSTAT_TXBUSY (1<<1) -#define PSSTAT_RXFULL (1<<2) -#define PSSTAT_RXBUSY (1<<3) -#define PSSTAT_CLKIN (1<<4) -#define PSSTAT_DATAIN (1<<5) -#define PSSTAT_PARITY (1<<6) - -#define PSCONF 0x08 -#define PSCONF_ENABLE (1<<0) -#define PSCONF_TXINTEN (1<<2) -#define PSCONF_RXINTEN (1<<3) -#define PSCONF_FORCECLKLOW (1<<4) -#define PSCONF_FORCEDATLOW (1<<5) -#define PSCONF_LCE (1<<6) - -#define PSINTR 0x0C -#define PSINTR_TXINT (1<<0) -#define PSINTR_RXINT (1<<1) -#define PSINTR_PAR (1<<2) -#define PSINTR_RXTO (1<<3) -#define PSINTR_TXTO (1<<4) - -#define PSTDLO 0x10 /* clk low before start transmission */ -#define PSTPRI 0x14 /* PRI clock */ -#define PSTXMT 0x18 /* maximum transmission time */ -#define PSTREC 0x20 /* maximum receive time */ -#define PSPWDN 0x3c - -/* ADC converter */ -#define ADC_BASE (IO_VIRT + 0x29000) -#define ADC_CR 0x00 -#define ADC_TSCTRL 0x04 -#define ADC_BT_CTRL 0x08 -#define ADC_MC_CTRL 0x0C -#define ADC_STATUS 0x10 - -/* ADC control register bits */ -#define ADC_CR_PW_CTRL 0x80 -#define ADC_CR_DIRECTC 0x04 -#define ADC_CR_CONTIME_NO 0x00 -#define ADC_CR_CONTIME_2 0x04 -#define ADC_CR_CONTIME_4 0x08 -#define ADC_CR_CONTIME_ADE 0x0c -#define ADC_CR_LONGCALTIME 0x01 - -/* ADC touch panel register bits */ -#define ADC_TSCTRL_ENABLE 0x80 -#define ADC_TSCTRL_INTR 0x40 -#define ADC_TSCTRL_SWBYPSS 0x20 -#define ADC_TSCTRL_SWINVT 0x10 -#define ADC_TSCTRL_S400 0x03 -#define ADC_TSCTRL_S200 0x02 -#define ADC_TSCTRL_S100 0x01 -#define ADC_TSCTRL_S50 0x00 - -/* ADC Interrupt Status Register bits */ -#define ADC_STATUS_TS_BIT 0x80 -#define ADC_STATUS_MBT_BIT 0x40 -#define ADC_STATUS_BBT_BIT 0x20 -#define ADC_STATUS_MIC_BIT 0x10 - -/* Touch data registers */ -#define ADC_TS_X0X1 0x30 -#define ADC_TS_X2X3 0x34 -#define ADC_TS_Y0Y1 0x38 -#define ADC_TS_Y2Y3 0x3c -#define ADC_TS_X4X5 0x40 -#define ADC_TS_X6X7 0x44 -#define ADC_TS_Y4Y5 0x48 -#define ADC_TS_Y6Y7 0x50 - -/* battery data */ -#define ADC_MB_DATA 0x54 -#define ADC_BB_DATA 0x58 - -/* Sound data register */ -#define ADC_SD_DAT0 0x60 -#define ADC_SD_DAT1 0x64 -#define ADC_SD_DAT2 0x68 -#define ADC_SD_DAT3 0x6c -#define ADC_SD_DAT4 0x70 -#define ADC_SD_DAT5 0x74 -#define ADC_SD_DAT6 0x78 -#define ADC_SD_DAT7 0x7c diff --git a/arch/arm/mach-h720x/include/mach/hardware.h b/arch/arm/mach-h720x/include/mach/hardware.h deleted file mode 100644 index c55a52c6541d..000000000000 --- a/arch/arm/mach-h720x/include/mach/hardware.h +++ /dev/null @@ -1,190 +0,0 @@ -/* - * arch/arm/mach-h720x/include/mach/hardware.h - * - * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc. - * (C) 2003 Thomas Gleixner <tglx@linutronix.de> - * (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de> - * - * This file contains the hardware definitions of the h720x processors - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Do not add implementations specific defines here. This files contains - * only defines of the onchip peripherals. Add those defines to boards.h, - * which is included by this file. - */ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#define IOCLK (3686400L) - -/* Onchip peripherals */ - -#define IO_VIRT 0xf0000000 /* IO peripherals */ -#define IO_PHYS 0x80000000 -#define IO_SIZE 0x00050000 - -#ifdef CONFIG_CPU_H7202 -#include "h7202-regs.h" -#elif defined CONFIG_CPU_H7201 -#include "h7201-regs.h" -#else -#error machine definition mismatch -#endif - -/* Macro to access the CPU IO */ -#define CPU_IO(x) (*(volatile u32*)(x)) - -/* Macro to access general purpose regs (base, offset) */ -#define CPU_REG(x,y) CPU_IO(x+y) - -/* Macro to access irq related regs */ -#define IRQ_REG(x) CPU_REG(IRQC_VIRT,x) - -/* CPU registers */ -/* general purpose I/O */ -#define GPIO_VIRT(x) (IO_VIRT + 0x23000 + ((x)<<5)) -#define GPIO_A_VIRT (GPIO_VIRT(0)) -#define GPIO_B_VIRT (GPIO_VIRT(1)) -#define GPIO_C_VIRT (GPIO_VIRT(2)) -#define GPIO_D_VIRT (GPIO_VIRT(3)) -#define GPIO_E_VIRT (GPIO_VIRT(4)) -#define GPIO_AMULSEL (GPIO_VIRT(0) + 0xA4) - -#define AMULSEL_USIN2 (1<<5) -#define AMULSEL_USOUT2 (1<<6) -#define AMULSEL_USIN3 (1<<13) -#define AMULSEL_USOUT3 (1<<14) -#define AMULSEL_IRDIN (1<<15) -#define AMULSEL_IRDOUT (1<<7) - -/* Register offsets general purpose I/O */ -#define GPIO_DATA 0x00 -#define GPIO_DIR 0x04 -#define GPIO_MASK 0x08 -#define GPIO_STAT 0x0C -#define GPIO_EDGE 0x10 -#define GPIO_CLR 0x14 -#define GPIO_POL 0x18 -#define GPIO_EN 0x1C - -/*interrupt controller */ -#define IRQC_VIRT (IO_VIRT + 0x24000) -/* register offset interrupt controller */ -#define IRQC_IER 0x00 -#define IRQC_ISR 0x04 - -/* timer unit */ -#define TIMER_VIRT (IO_VIRT + 0x25000) -/* Register offsets timer unit */ -#define TM0_PERIOD 0x00 -#define TM0_COUNT 0x08 -#define TM0_CTRL 0x10 -#define TM1_PERIOD 0x20 -#define TM1_COUNT 0x28 -#define TM1_CTRL 0x30 -#define TM2_PERIOD 0x40 -#define TM2_COUNT 0x48 -#define TM2_CTRL 0x50 -#define TIMER_TOPCTRL 0x60 -#define TIMER_TOPSTAT 0x64 -#define T64_COUNTL 0x80 -#define T64_COUNTH 0x84 -#define T64_CTRL 0x88 -#define T64_BASEL 0x94 -#define T64_BASEH 0x98 -/* Bitmaks timer unit TOPSTAT reg */ -#define TSTAT_T0INT 0x1 -#define TSTAT_T1INT 0x2 -#define TSTAT_T2INT 0x4 -#define TSTAT_T3INT 0x8 -/* Bit description of TMx_CTRL register */ -#define TM_START 0x1 -#define TM_REPEAT 0x2 -#define TM_RESET 0x4 -/* Bit description of TIMER_CTRL register */ -#define ENABLE_TM0_INTR 0x1 -#define ENABLE_TM1_INTR 0x2 -#define ENABLE_TM2_INTR 0x4 -#define TIMER_ENABLE_BIT 0x8 -#define ENABLE_TIMER64 0x10 -#define ENABLE_TIMER64_INT 0x20 - -/* PMU & PLL */ -#define PMU_BASE (IO_VIRT + 0x1000) -#define PMU_MODE 0x00 -#define PMU_STAT 0x20 -#define PMU_PLL_CTRL 0x28 - -/* PMU Mode bits */ -#define PMU_MODE_SLOW 0x00 -#define PMU_MODE_RUN 0x01 -#define PMU_MODE_IDLE 0x02 -#define PMU_MODE_SLEEP 0x03 -#define PMU_MODE_INIT 0x04 -#define PMU_MODE_DEEPSLEEP 0x07 -#define PMU_MODE_WAKEUP 0x08 - -/* PMU ... */ -#define PLL_2_EN 0x8000 -#define PLL_1_EN 0x4000 -#define PLL_3_MUTE 0x0080 - -/* Control bits for PMU/ PLL */ -#define PMU_WARMRESET 0x00010000 -#define PLL_CTRL_MASK23 0x000080ff - -/* LCD Controller */ -#define LCD_BASE (IO_VIRT + 0x10000) -#define LCD_CTRL 0x00 -#define LCD_STATUS 0x04 -#define LCD_STATUS_M 0x08 -#define LCD_INTERRUPT 0x0C -#define LCD_DBAR 0x10 -#define LCD_DCAR 0x14 -#define LCD_TIMING0 0x20 -#define LCD_TIMING1 0x24 -#define LCD_TIMING2 0x28 -#define LCD_TEST 0x40 - -/* LCD Control Bits */ -#define LCD_CTRL_LCD_ENABLE 0x00000001 -/* Bits per pixel */ -#define LCD_CTRL_LCD_BPP_MASK 0x00000006 -#define LCD_CTRL_LCD_4BPP 0x00000000 -#define LCD_CTRL_LCD_8BPP 0x00000002 -#define LCD_CTRL_LCD_16BPP 0x00000004 -#define LCD_CTRL_LCD_BW 0x00000008 -#define LCD_CTRL_LCD_TFT 0x00000010 -#define LCD_CTRL_BGR 0x00001000 -#define LCD_CTRL_LCD_VCOMP 0x00080000 -#define LCD_CTRL_LCD_MONO8 0x00200000 -#define LCD_CTRL_LCD_PWR 0x00400000 -#define LCD_CTRL_LCD_BLE 0x00800000 -#define LCD_CTRL_LDBUSEN 0x01000000 - -/* Palette */ -#define LCD_PALETTE_BASE (IO_VIRT + 0x10400) - -/* Serial ports */ -#define SERIAL0_OFS 0x20000 -#define SERIAL0_VIRT (IO_VIRT + SERIAL0_OFS) -#define SERIAL0_BASE (IO_PHYS + SERIAL0_OFS) - -#define SERIAL1_OFS 0x21000 -#define SERIAL1_VIRT (IO_VIRT + SERIAL1_OFS) -#define SERIAL1_BASE (IO_PHYS + SERIAL1_OFS) - -#define SERIAL_ENABLE 0x30 -#define SERIAL_ENABLE_EN (1<<0) - -/* General defines to pacify gcc */ - -#define __ASM_ARCH_HARDWARE_INCMACH_H -#include "boards.h" -#undef __ASM_ARCH_HARDWARE_INCMACH_H - -#endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/mach-h720x/include/mach/irqs.h b/arch/arm/mach-h720x/include/mach/irqs.h deleted file mode 100644 index 430a92b492f1..000000000000 --- a/arch/arm/mach-h720x/include/mach/irqs.h +++ /dev/null @@ -1,116 +0,0 @@ -/* - * arch/arm/mach-h720x/include/mach/irqs.h - * - * Copyright (C) 2000 Jungjun Kim - * (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de> - * (C) 2003 Thomas Gleixner <tglx@linutronix.de> - * - */ - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H - -#if defined (CONFIG_CPU_H7201) - -#define IRQ_PMU 0 /* 0x000001 */ -#define IRQ_DMA 1 /* 0x000002 */ -#define IRQ_LCD 2 /* 0x000004 */ -#define IRQ_VGA 3 /* 0x000008 */ -#define IRQ_PCMCIA1 4 /* 0x000010 */ -#define IRQ_PCMCIA2 5 /* 0x000020 */ -#define IRQ_AFE 6 /* 0x000040 */ -#define IRQ_AIC 7 /* 0x000080 */ -#define IRQ_KEYBOARD 8 /* 0x000100 */ -#define IRQ_TIMER0 9 /* 0x000200 */ -#define IRQ_RTC 10 /* 0x000400 */ -#define IRQ_SOUND 11 /* 0x000800 */ -#define IRQ_USB 12 /* 0x001000 */ -#define IRQ_IrDA 13 /* 0x002000 */ -#define IRQ_UART0 14 /* 0x004000 */ -#define IRQ_UART1 15 /* 0x008000 */ -#define IRQ_SPI 16 /* 0x010000 */ -#define IRQ_GPIOA 17 /* 0x020000 */ -#define IRQ_GPIOB 18 /* 0x040000 */ -#define IRQ_GPIOC 19 /* 0x080000 */ -#define IRQ_GPIOD 20 /* 0x100000 */ -#define IRQ_CommRX 21 /* 0x200000 */ -#define IRQ_CommTX 22 /* 0x400000 */ -#define IRQ_Soft 23 /* 0x800000 */ - -#define NR_GLBL_IRQS 24 - -#define IRQ_CHAINED_GPIOA(x) (NR_GLBL_IRQS + x) -#define IRQ_CHAINED_GPIOB(x) (IRQ_CHAINED_GPIOA(32) + x) -#define IRQ_CHAINED_GPIOC(x) (IRQ_CHAINED_GPIOB(32) + x) -#define IRQ_CHAINED_GPIOD(x) (IRQ_CHAINED_GPIOC(32) + x) -#define NR_IRQS IRQ_CHAINED_GPIOD(32) - -/* Enable mask for multiplexed interrupts */ -#define IRQ_ENA_MUX (1<<IRQ_GPIOA) | (1<<IRQ_GPIOB) \ - | (1<<IRQ_GPIOC) | (1<<IRQ_GPIOD) - - -#elif defined (CONFIG_CPU_H7202) - -#define IRQ_PMU 0 /* 0x00000001 */ -#define IRQ_DMA 1 /* 0x00000002 */ -#define IRQ_LCD 2 /* 0x00000004 */ -#define IRQ_SOUND 3 /* 0x00000008 */ -#define IRQ_I2S 4 /* 0x00000010 */ -#define IRQ_USB 5 /* 0x00000020 */ -#define IRQ_MMC 6 /* 0x00000040 */ -#define IRQ_RTC 7 /* 0x00000080 */ -#define IRQ_UART0 8 /* 0x00000100 */ -#define IRQ_UART1 9 /* 0x00000200 */ -#define IRQ_UART2 10 /* 0x00000400 */ -#define IRQ_UART3 11 /* 0x00000800 */ -#define IRQ_KBD 12 /* 0x00001000 */ -#define IRQ_PS2 13 /* 0x00002000 */ -#define IRQ_AIC 14 /* 0x00004000 */ -#define IRQ_TIMER0 15 /* 0x00008000 */ -#define IRQ_TIMERX 16 /* 0x00010000 */ -#define IRQ_WDT 17 /* 0x00020000 */ -#define IRQ_CAN0 18 /* 0x00040000 */ -#define IRQ_CAN1 19 /* 0x00080000 */ -#define IRQ_EXT0 20 /* 0x00100000 */ -#define IRQ_EXT1 21 /* 0x00200000 */ -#define IRQ_GPIOA 22 /* 0x00400000 */ -#define IRQ_GPIOB 23 /* 0x00800000 */ -#define IRQ_GPIOC 24 /* 0x01000000 */ -#define IRQ_GPIOD 25 /* 0x02000000 */ -#define IRQ_GPIOE 26 /* 0x04000000 */ -#define IRQ_COMMRX 27 /* 0x08000000 */ -#define IRQ_COMMTX 28 /* 0x10000000 */ -#define IRQ_SMC 29 /* 0x20000000 */ -#define IRQ_Soft 30 /* 0x40000000 */ -#define IRQ_RESERVED1 31 /* 0x80000000 */ -#define NR_GLBL_IRQS 32 - -#define NR_TIMERX_IRQS 3 - -#define IRQ_CHAINED_GPIOA(x) (NR_GLBL_IRQS + x) -#define IRQ_CHAINED_GPIOB(x) (IRQ_CHAINED_GPIOA(32) + x) -#define IRQ_CHAINED_GPIOC(x) (IRQ_CHAINED_GPIOB(32) + x) -#define IRQ_CHAINED_GPIOD(x) (IRQ_CHAINED_GPIOC(32) + x) -#define IRQ_CHAINED_GPIOE(x) (IRQ_CHAINED_GPIOD(32) + x) -#define IRQ_CHAINED_TIMERX(x) (IRQ_CHAINED_GPIOE(32) + x) -#define IRQ_TIMER1 (IRQ_CHAINED_TIMERX(0)) -#define IRQ_TIMER2 (IRQ_CHAINED_TIMERX(1)) -#define IRQ_TIMER64B (IRQ_CHAINED_TIMERX(2)) - -#define NR_IRQS (IRQ_CHAINED_TIMERX(NR_TIMERX_IRQS)) - -/* Enable mask for multiplexed interrupts */ -#define IRQ_ENA_MUX (1<<IRQ_TIMERX) | (1<<IRQ_GPIOA) | (1<<IRQ_GPIOB) | \ - (1<<IRQ_GPIOC) | (1<<IRQ_GPIOD) | (1<<IRQ_GPIOE) | \ - (1<<IRQ_TIMERX) - -#else -#error cpu definition mismatch -#endif - -/* decode irq number to register number */ -#define IRQ_TO_REGNO(irq) ((irq - NR_GLBL_IRQS) >> 5) -#define IRQ_TO_BIT(irq) (1 << ((irq - NR_GLBL_IRQS) % 32)) - -#endif diff --git a/arch/arm/mach-h720x/include/mach/isa-dma.h b/arch/arm/mach-h720x/include/mach/isa-dma.h deleted file mode 100644 index 3eafb3f163c0..000000000000 --- a/arch/arm/mach-h720x/include/mach/isa-dma.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-h720x/include/mach/isa-dma.h - * - * Architecture DMA routes - * - * Copyright (C) 1997.1998 Russell King - */ -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H - -#if defined (CONFIG_CPU_H7201) -#define MAX_DMA_CHANNELS 3 -#elif defined (CONFIG_CPU_H7202) -#define MAX_DMA_CHANNELS 4 -#else -#error processor definition missmatch -#endif - -#endif /* __ASM_ARCH_DMA_H */ diff --git a/arch/arm/mach-h720x/include/mach/uncompress.h b/arch/arm/mach-h720x/include/mach/uncompress.h deleted file mode 100644 index 43e343c4b50a..000000000000 --- a/arch/arm/mach-h720x/include/mach/uncompress.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * arch/arm/mach-h720x/include/mach/uncompress.h - * - * Copyright (C) 2001-2002 Jungjun Kim - */ - -#ifndef __ASM_ARCH_UNCOMPRESS_H -#define __ASM_ARCH_UNCOMPRESS_H - -#include <mach/hardware.h> - -#define LSR 0x14 -#define TEMPTY 0x40 - -static inline void putc(int c) -{ - volatile unsigned char *p = (volatile unsigned char *)(IO_PHYS+0x20000); - - /* wait until transmit buffer is empty */ - while((p[LSR] & TEMPTY) == 0x0) - barrier(); - - /* write next character */ - *p = c; -} - -static inline void flush(void) -{ -} - -/* - * nothing to do - */ -#define arch_decomp_setup() - -#endif diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig index 44b12f9c1584..cd9fcb1cd7ab 100644 --- a/arch/arm/mach-highbank/Kconfig +++ b/arch/arm/mach-highbank/Kconfig @@ -12,6 +12,7 @@ config ARCH_HIGHBANK select CPU_V7 select GENERIC_CLOCKEVENTS select HAVE_ARM_SCU + select HAVE_ARM_TWD if LOCAL_TIMERS select HAVE_SMP select MAILBOX select PL320_MBOX diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c index a4f9f50247d4..e7df2dd43a40 100644 --- a/arch/arm/mach-highbank/highbank.c +++ b/arch/arm/mach-highbank/highbank.c @@ -15,6 +15,7 @@ */ #include <linux/clk.h> #include <linux/clkdev.h> +#include <linux/clocksource.h> #include <linux/dma-mapping.h> #include <linux/io.h> #include <linux/irq.h> @@ -28,13 +29,9 @@ #include <linux/amba/bus.h> #include <linux/clk-provider.h> -#include <asm/arch_timer.h> #include <asm/cacheflush.h> #include <asm/cputype.h> #include <asm/smp_plat.h> -#include <asm/smp_twd.h> -#include <asm/hardware/arm_timer.h> -#include <asm/hardware/timer-sp.h> #include <asm/hardware/cache-l2x0.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -91,38 +88,18 @@ static void __init highbank_init_irq(void) #endif } -static struct clk_lookup lookup = { - .dev_id = "sp804", - .con_id = NULL, -}; - static void __init highbank_timer_init(void) { - int irq; struct device_node *np; - void __iomem *timer_base; /* Map system registers */ np = of_find_compatible_node(NULL, NULL, "calxeda,hb-sregs"); sregs_base = of_iomap(np, 0); WARN_ON(!sregs_base); - np = of_find_compatible_node(NULL, NULL, "arm,sp804"); - timer_base = of_iomap(np, 0); - WARN_ON(!timer_base); - irq = irq_of_parse_and_map(np, 0); - of_clk_init(NULL); - lookup.clk = of_clk_get(np, 0); - clkdev_add(&lookup); - - sp804_clocksource_and_sched_clock_init(timer_base + 0x20, "timer1"); - sp804_clockevents_init(timer_base, irq, "timer0"); - - twd_local_timer_of_register(); - arch_timer_of_register(); - arch_timer_sched_clock_init(); + clocksource_of_init(); } static void highbank_power_off(void) diff --git a/arch/arm/mach-highbank/hotplug.c b/arch/arm/mach-highbank/hotplug.c index f30c52843396..a019e4e86e51 100644 --- a/arch/arm/mach-highbank/hotplug.c +++ b/arch/arm/mach-highbank/hotplug.c @@ -14,7 +14,6 @@ * this program. If not, see <http://www.gnu.org/licenses/>. */ #include <linux/kernel.h> - #include <asm/cacheflush.h> #include "core.h" @@ -28,13 +27,11 @@ extern void secondary_startup(void); */ void __ref highbank_cpu_die(unsigned int cpu) { - flush_cache_all(); - highbank_set_cpu_jump(cpu, phys_to_virt(0)); - highbank_set_core_pwr(); - cpu_do_idle(); + flush_cache_louis(); + highbank_set_core_pwr(); - /* We should never return from idle */ - panic("highbank: cpu %d unexpectedly exit from shutdown\n", cpu); + while (1) + cpu_do_idle(); } diff --git a/arch/arm/mach-highbank/platsmp.c b/arch/arm/mach-highbank/platsmp.c index 8797a7001720..a984573e0d02 100644 --- a/arch/arm/mach-highbank/platsmp.c +++ b/arch/arm/mach-highbank/platsmp.c @@ -17,7 +17,6 @@ #include <linux/init.h> #include <linux/smp.h> #include <linux/io.h> -#include <linux/irqchip/arm-gic.h> #include <asm/smp_scu.h> @@ -25,11 +24,6 @@ extern void secondary_startup(void); -static void __cpuinit highbank_secondary_init(unsigned int cpu) -{ - gic_secondary_init(0); -} - static int __cpuinit highbank_boot_secondary(unsigned int cpu, struct task_struct *idle) { highbank_set_cpu_jump(cpu, secondary_startup); @@ -67,7 +61,6 @@ static void __init highbank_smp_prepare_cpus(unsigned int max_cpus) struct smp_operations highbank_smp_ops __initdata = { .smp_init_cpus = highbank_smp_init_cpus, .smp_prepare_cpus = highbank_smp_prepare_cpus, - .smp_secondary_init = highbank_secondary_init, .smp_boot_secondary = highbank_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_die = highbank_cpu_die, diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 4c9c6f9d2c55..78f795d73cb6 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -65,6 +65,9 @@ config IRAM_ALLOC bool select GENERIC_ALLOCATOR +config HAVE_IMX_ANATOP + bool + config HAVE_IMX_GPC bool @@ -73,6 +76,7 @@ config HAVE_IMX_MMDC config HAVE_IMX_SRC def_bool y if SMP + select ARCH_HAS_RESET_CONTROLLER config IMX_HAVE_IOMUX_V1 bool @@ -83,24 +87,12 @@ config ARCH_MXC_IOMUX_V3 config ARCH_MX1 bool -config MACH_MX21 - bool - config ARCH_MX25 bool config MACH_MX27 bool -config ARCH_MX5 - bool - -config ARCH_MX51 - bool - -config ARCH_MX53 - bool - config SOC_IMX1 bool select ARCH_MX1 @@ -114,7 +106,6 @@ config SOC_IMX21 select COMMON_CLK select CPU_ARM926T select IMX_HAVE_IOMUX_V1 - select MACH_MX21 select MXC_AVIC config SOC_IMX25 @@ -128,6 +119,8 @@ config SOC_IMX25 config SOC_IMX27 bool + select ARCH_HAS_CPUFREQ + select ARCH_HAS_OPP select COMMON_CLK select CPU_ARM926T select IMX_HAVE_IOMUX_V1 @@ -155,7 +148,7 @@ config SOC_IMX35 config SOC_IMX5 bool select ARCH_HAS_CPUFREQ - select ARCH_MX5 + select ARCH_HAS_OPP select ARCH_MXC_IOMUX_V3 select COMMON_CLK select CPU_V7 @@ -163,8 +156,7 @@ config SOC_IMX5 config SOC_IMX51 bool - select ARCH_MX5 - select ARCH_MX51 + select HAVE_IMX_SRC select PINCTRL select PINCTRL_IMX51 select SOC_IMX5 @@ -481,8 +473,6 @@ config MACH_MX31ADS_WM1133_EV1 depends on MACH_MX31ADS depends on MFD_WM8350_I2C depends on REGULATOR_WM8350 = y - select MFD_WM8350_CONFIG_MODE_0 - select MFD_WM8352_CONFIG_MODE_0 help Include support for the Wolfson Microelectronics 1133-EV1 PMU and audio module for the MX31ADS platform. @@ -789,9 +779,8 @@ comment "Device tree only" config SOC_IMX53 bool "i.MX53 support" - select ARCH_MX5 - select ARCH_MX53 select HAVE_CAN_FLEXCAN if CAN + select HAVE_IMX_SRC select IMX_HAVE_PLATFORM_IMX2_WDT select PINCTRL select PINCTRL_IMX53 @@ -801,7 +790,7 @@ config SOC_IMX53 This enables support for Freescale i.MX53 processor. config SOC_IMX6Q - bool "i.MX6 Quad support" + bool "i.MX6 Quad/DualLite support" select ARCH_HAS_CPUFREQ select ARCH_HAS_OPP select ARM_CPU_SUSPEND if PM @@ -811,8 +800,10 @@ config SOC_IMX6Q select ARM_GIC select COMMON_CLK select CPU_V7 - select HAVE_ARM_SCU + select HAVE_ARM_SCU if SMP + select HAVE_ARM_TWD if LOCAL_TIMERS select HAVE_CAN_FLEXCAN if CAN + select HAVE_IMX_ANATOP select HAVE_IMX_GPC select HAVE_IMX_MMDC select HAVE_IMX_SRC diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index c4ce0906d76a..930958973f81 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -12,7 +12,7 @@ obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clk-imx31.o iomux-imx31.o ehci- obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clk-imx35.o ehci-imx35.o pm-imx3.o imx5-pm-$(CONFIG_PM) += pm-imx5.o -obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o $(imx5-pm-y) cpu_op-mx51.o +obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o $(imx5-pm-y) obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \ clk-pfd.o clk-busy.o clk.o @@ -27,10 +27,9 @@ obj-$(CONFIG_IRAM_ALLOC) += iram_alloc.o obj-$(CONFIG_MXC_ULPI) += ulpi.o obj-$(CONFIG_MXC_USE_EPIT) += epit.o obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o -obj-$(CONFIG_CPU_FREQ_IMX) += cpufreq.o ifeq ($(CONFIG_CPU_IDLE),y) -obj-y += cpuidle.o +obj-$(CONFIG_SOC_IMX5) += cpuidle-imx5.o obj-$(CONFIG_SOC_IMX6Q) += cpuidle-imx6q.o endif @@ -92,6 +91,7 @@ obj-$(CONFIG_MACH_EUKREA_CPUIMX35SD) += mach-cpuimx35.o obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD) += eukrea_mbimxsd35-baseboard.o obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o +obj-$(CONFIG_HAVE_IMX_ANATOP) += anatop.o obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o obj-$(CONFIG_HAVE_IMX_SRC) += src.o diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot deleted file mode 100644 index 41ba1bb0437b..000000000000 --- a/arch/arm/mach-imx/Makefile.boot +++ /dev/null @@ -1,35 +0,0 @@ -zreladdr-$(CONFIG_SOC_IMX1) += 0x08008000 -params_phys-$(CONFIG_SOC_IMX1) := 0x08000100 -initrd_phys-$(CONFIG_SOC_IMX1) := 0x08800000 - -zreladdr-$(CONFIG_SOC_IMX21) += 0xC0008000 -params_phys-$(CONFIG_SOC_IMX21) := 0xC0000100 -initrd_phys-$(CONFIG_SOC_IMX21) := 0xC0800000 - -zreladdr-$(CONFIG_SOC_IMX25) += 0x80008000 -params_phys-$(CONFIG_SOC_IMX25) := 0x80000100 -initrd_phys-$(CONFIG_SOC_IMX25) := 0x80800000 - -zreladdr-$(CONFIG_SOC_IMX27) += 0xA0008000 -params_phys-$(CONFIG_SOC_IMX27) := 0xA0000100 -initrd_phys-$(CONFIG_SOC_IMX27) := 0xA0800000 - -zreladdr-$(CONFIG_SOC_IMX31) += 0x80008000 -params_phys-$(CONFIG_SOC_IMX31) := 0x80000100 -initrd_phys-$(CONFIG_SOC_IMX31) := 0x80800000 - -zreladdr-$(CONFIG_SOC_IMX35) += 0x80008000 -params_phys-$(CONFIG_SOC_IMX35) := 0x80000100 -initrd_phys-$(CONFIG_SOC_IMX35) := 0x80800000 - -zreladdr-$(CONFIG_SOC_IMX51) += 0x90008000 -params_phys-$(CONFIG_SOC_IMX51) := 0x90000100 -initrd_phys-$(CONFIG_SOC_IMX51) := 0x90800000 - -zreladdr-$(CONFIG_SOC_IMX53) += 0x70008000 -params_phys-$(CONFIG_SOC_IMX53) := 0x70000100 -initrd_phys-$(CONFIG_SOC_IMX53) := 0x70800000 - -zreladdr-$(CONFIG_SOC_IMX6Q) += 0x10008000 -params_phys-$(CONFIG_SOC_IMX6Q) := 0x10000100 -initrd_phys-$(CONFIG_SOC_IMX6Q) := 0x10800000 diff --git a/arch/arm/mach-imx/anatop.c b/arch/arm/mach-imx/anatop.c new file mode 100644 index 000000000000..0cfa07dd9aa4 --- /dev/null +++ b/arch/arm/mach-imx/anatop.c @@ -0,0 +1,103 @@ +/* + * Copyright (C) 2013 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/err.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/mfd/syscon.h> +#include <linux/regmap.h> +#include "common.h" + +#define REG_SET 0x4 +#define REG_CLR 0x8 + +#define ANADIG_REG_2P5 0x130 +#define ANADIG_REG_CORE 0x140 +#define ANADIG_ANA_MISC0 0x150 +#define ANADIG_USB1_CHRG_DETECT 0x1b0 +#define ANADIG_USB2_CHRG_DETECT 0x210 +#define ANADIG_DIGPROG 0x260 + +#define BM_ANADIG_REG_2P5_ENABLE_WEAK_LINREG 0x40000 +#define BM_ANADIG_REG_CORE_FET_ODRIVE 0x20000000 +#define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG 0x1000 +#define BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B 0x80000 +#define BM_ANADIG_USB_CHRG_DETECT_EN_B 0x100000 + +static struct regmap *anatop; + +static void imx_anatop_enable_weak2p5(bool enable) +{ + u32 reg, val; + + regmap_read(anatop, ANADIG_ANA_MISC0, &val); + + /* can only be enabled when stop_mode_config is clear. */ + reg = ANADIG_REG_2P5; + reg += (enable && (val & BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG) == 0) ? + REG_SET : REG_CLR; + regmap_write(anatop, reg, BM_ANADIG_REG_2P5_ENABLE_WEAK_LINREG); +} + +static void imx_anatop_enable_fet_odrive(bool enable) +{ + regmap_write(anatop, ANADIG_REG_CORE + (enable ? REG_SET : REG_CLR), + BM_ANADIG_REG_CORE_FET_ODRIVE); +} + +void imx_anatop_pre_suspend(void) +{ + imx_anatop_enable_weak2p5(true); + imx_anatop_enable_fet_odrive(true); +} + +void imx_anatop_post_resume(void) +{ + imx_anatop_enable_fet_odrive(false); + imx_anatop_enable_weak2p5(false); +} + +void imx_anatop_usb_chrg_detect_disable(void) +{ + regmap_write(anatop, ANADIG_USB1_CHRG_DETECT, + BM_ANADIG_USB_CHRG_DETECT_EN_B + | BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B); + regmap_write(anatop, ANADIG_USB2_CHRG_DETECT, + BM_ANADIG_USB_CHRG_DETECT_EN_B | + BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B); +} + +u32 imx_anatop_get_digprog(void) +{ + struct device_node *np; + void __iomem *anatop_base; + static u32 digprog; + + if (digprog) + return digprog; + + np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop"); + anatop_base = of_iomap(np, 0); + WARN_ON(!anatop_base); + digprog = readl_relaxed(anatop_base + ANADIG_DIGPROG); + + return digprog; +} + +void __init imx_anatop_init(void) +{ + anatop = syscon_regmap_lookup_by_compatible("fsl,imx6q-anatop"); + if (IS_ERR(anatop)) { + pr_err("%s: failed to find imx6q-anatop regmap!\n", __func__); + return; + } +} diff --git a/arch/arm/mach-imx/avic.c b/arch/arm/mach-imx/avic.c index 0eff23ed92b9..e163ec7a8441 100644 --- a/arch/arm/mach-imx/avic.c +++ b/arch/arm/mach-imx/avic.c @@ -51,11 +51,9 @@ #define AVIC_NUM_IRQS 64 -void __iomem *avic_base; +static void __iomem *avic_base; static struct irq_domain *domain; -static u32 avic_saved_mask_reg[2]; - #ifdef CONFIG_MXC_IRQ_PRIOR static int avic_irq_set_priority(unsigned char irq, unsigned char prio) { @@ -113,6 +111,8 @@ static struct mxc_extra_irq avic_extra_irq = { }; #ifdef CONFIG_PM +static u32 avic_saved_mask_reg[2]; + static void avic_irq_suspend(struct irq_data *d) { struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); diff --git a/arch/arm/mach-imx/clk-busy.c b/arch/arm/mach-imx/clk-busy.c index 1ab91b5209e6..4bb1bc419b79 100644 --- a/arch/arm/mach-imx/clk-busy.c +++ b/arch/arm/mach-imx/clk-busy.c @@ -147,7 +147,7 @@ static int clk_busy_mux_set_parent(struct clk_hw *hw, u8 index) return ret; } -struct clk_ops clk_busy_mux_ops = { +static struct clk_ops clk_busy_mux_ops = { .get_parent = clk_busy_mux_get_parent, .set_parent = clk_busy_mux_set_parent, }; @@ -169,7 +169,7 @@ struct clk *imx_clk_busy_mux(const char *name, void __iomem *reg, u8 shift, busy->mux.reg = reg; busy->mux.shift = shift; - busy->mux.width = width; + busy->mux.mask = BIT(width) - 1; busy->mux.lock = &imx_ccm_lock; busy->mux_ops = &clk_mux_ops; diff --git a/arch/arm/mach-imx/clk-gate2.c b/arch/arm/mach-imx/clk-gate2.c index cc49c7ae186e..a63e415609a8 100644 --- a/arch/arm/mach-imx/clk-gate2.c +++ b/arch/arm/mach-imx/clk-gate2.c @@ -15,6 +15,7 @@ #include <linux/io.h> #include <linux/err.h> #include <linux/string.h> +#include "clk.h" /** * DOC: basic gatable clock which can gate and ungate it's ouput diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c index 30b3242a7d49..c3cfa4116dc0 100644 --- a/arch/arm/mach-imx/clk-imx27.c +++ b/arch/arm/mach-imx/clk-imx27.c @@ -86,10 +86,12 @@ enum mx27_clks { }; static struct clk *clk[clk_max]; +static struct clk_onecell_data clk_data; int __init mx27_clocks_init(unsigned long fref) { int i; + struct device_node *np; clk[dummy] = imx_clk_fixed("dummy", 0); clk[ckih] = imx_clk_fixed("ckih", fref); @@ -198,6 +200,13 @@ int __init mx27_clocks_init(unsigned long fref) pr_err("i.MX27 clk %d: register failed with %ld\n", i, PTR_ERR(clk[i])); + np = of_find_compatible_node(NULL, NULL, "fsl,imx27-ccm"); + if (np) { + clk_data.clks = clk; + clk_data.clk_num = ARRAY_SIZE(clk); + of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); + } + clk_register_clkdev(clk[uart1_ipg_gate], "ipg", "imx21-uart.0"); clk_register_clkdev(clk[per1_gate], "per", "imx21-uart.0"); clk_register_clkdev(clk[uart2_ipg_gate], "ipg", "imx21-uart.1"); @@ -276,10 +285,8 @@ int __init mx27_clocks_init(unsigned long fref) clk_register_clkdev(clk[ata_ahb_gate], "ata", NULL); clk_register_clkdev(clk[rtc_ipg_gate], NULL, "imx21-rtc"); clk_register_clkdev(clk[scc_ipg_gate], "scc", NULL); - clk_register_clkdev(clk[cpu_div], "cpu", NULL); + clk_register_clkdev(clk[cpu_div], NULL, "cpufreq-cpu0.0"); clk_register_clkdev(clk[emi_ahb_gate], "emi_ahb" , NULL); - clk_register_clkdev(clk[ssi1_baud_gate], "bitrate" , "imx-ssi.0"); - clk_register_clkdev(clk[ssi2_baud_gate], "bitrate" , "imx-ssi.1"); mxc_timer_init(MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR), MX27_INT_GPT1); diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c index 0f39f8c93b94..6fc486b6a3c6 100644 --- a/arch/arm/mach-imx/clk-imx51-imx53.c +++ b/arch/arm/mach-imx/clk-imx51-imx53.c @@ -45,16 +45,40 @@ static const char *mx53_ipu_di1_sel[] = { "di_pred", "osc", "ckih1", "tve_di", " static const char *mx53_ldb_di1_sel[] = { "pll3_sw", "pll4_sw", }; static const char *mx51_tve_ext_sel[] = { "osc", "ckih1", }; static const char *mx53_tve_ext_sel[] = { "pll4_sw", "ckih1", }; -static const char *tve_sel[] = { "tve_pred", "tve_ext_sel", }; +static const char *mx51_tve_sel[] = { "tve_pred", "tve_ext_sel", }; static const char *ipu_sel[] = { "axi_a", "axi_b", "emi_slow_gate", "ahb", }; +static const char *gpu3d_sel[] = { "axi_a", "axi_b", "emi_slow_gate", "ahb" }; +static const char *gpu2d_sel[] = { "axi_a", "axi_b", "emi_slow_gate", "ahb" }; static const char *vpu_sel[] = { "axi_a", "axi_b", "emi_slow_gate", "ahb", }; static const char *mx53_can_sel[] = { "ipg", "ckih1", "ckih2", "lp_apm", }; +static const char *mx53_cko1_sel[] = { + "cpu_podf", "pll1_sw", "pll2_sw", "pll3_sw", + "emi_slow_podf", "pll4_sw", "nfc_podf", "dummy", + "di_pred", "dummy", "dummy", "ahb", + "ipg", "per_root", "ckil", "dummy",}; +static const char *mx53_cko2_sel[] = { + "dummy"/* dptc_core */, "dummy"/* dptc_perich */, + "dummy", "esdhc_a_podf", + "usboh3_podf", "dummy"/* wrck_clk_root */, + "ecspi_podf", "dummy"/* pll1_ref_clk */, + "esdhc_b_podf", "dummy"/* ddr_clk_root */, + "dummy"/* arm_axi_clk_root */, "dummy"/* usb_phy_out */, + "vpu_sel", "ipu_sel", + "osc", "ckih1", + "dummy", "esdhc_c_sel", + "ssi1_root_podf", "ssi2_root_podf", + "dummy", "dummy", + "dummy"/* lpsr_clk_root */, "dummy"/* pgc_clk_root */, + "dummy"/* tve_out */, "usb_phy_sel", + "tve_sel", "lp_apm", + "uart_root", "dummy"/* spdif0_clk_root */, + "dummy", "dummy", }; enum imx5_clks { dummy, ckil, osc, ckih1, ckih2, ahb, ipg, axi_a, axi_b, uart_pred, uart_root, esdhc_a_pred, esdhc_b_pred, esdhc_c_s, esdhc_d_s, emi_sel, emi_slow_podf, nfc_podf, ecspi_pred, ecspi_podf, usboh3_pred, - usboh3_podf, usb_phy_pred, usb_phy_podf, cpu_podf, di_pred, tve_di, + usboh3_podf, usb_phy_pred, usb_phy_podf, cpu_podf, di_pred, tve_di_unused, tve_s, uart1_ipg_gate, uart1_per_gate, uart2_ipg_gate, uart2_per_gate, uart3_ipg_gate, uart3_per_gate, i2c1_gate, i2c2_gate, gpt_ipg_gate, pwm1_ipg_gate, pwm1_hf_gate, pwm2_ipg_gate, pwm2_hf_gate, @@ -83,7 +107,10 @@ enum imx5_clks { ssi2_root_gate, ssi3_root_gate, ssi_ext1_gate, ssi_ext2_gate, epit1_ipg_gate, epit1_hf_gate, epit2_ipg_gate, epit2_hf_gate, can_sel, can1_serial_gate, can1_ipg_gate, - owire_gate, + owire_gate, gpu3d_s, gpu2d_s, gpu3d_gate, gpu2d_gate, garb_gate, + cko1_sel, cko1_podf, cko1, + cko2_sel, cko2_podf, cko2, + srtc_gate, pata_gate, clk_max }; @@ -160,8 +187,6 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, usb_phy_sel_str, ARRAY_SIZE(usb_phy_sel_str)); clk[cpu_podf] = imx_clk_divider("cpu_podf", "pll1_sw", MXC_CCM_CACRR, 0, 3); clk[di_pred] = imx_clk_divider("di_pred", "pll3_sw", MXC_CCM_CDCDR, 6, 3); - clk[tve_di] = imx_clk_fixed("tve_di", 65000000); /* FIXME */ - clk[tve_s] = imx_clk_mux("tve_sel", MXC_CCM_CSCMR1, 7, 1, tve_sel, ARRAY_SIZE(tve_sel)); clk[iim_gate] = imx_clk_gate2("iim_gate", "ipg", MXC_CCM_CCGR0, 30); clk[uart1_ipg_gate] = imx_clk_gate2("uart1_ipg_gate", "ipg", MXC_CCM_CCGR1, 6); clk[uart1_per_gate] = imx_clk_gate2("uart1_per_gate", "uart_root", MXC_CCM_CCGR1, 8); @@ -200,6 +225,11 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, clk[nfc_gate] = imx_clk_gate2("nfc_gate", "nfc_podf", MXC_CCM_CCGR5, 20); clk[ipu_di0_gate] = imx_clk_gate2("ipu_di0_gate", "ipu_di0_sel", MXC_CCM_CCGR6, 10); clk[ipu_di1_gate] = imx_clk_gate2("ipu_di1_gate", "ipu_di1_sel", MXC_CCM_CCGR6, 12); + clk[gpu3d_s] = imx_clk_mux("gpu3d_sel", MXC_CCM_CBCMR, 4, 2, gpu3d_sel, ARRAY_SIZE(gpu3d_sel)); + clk[gpu2d_s] = imx_clk_mux("gpu2d_sel", MXC_CCM_CBCMR, 16, 2, gpu2d_sel, ARRAY_SIZE(gpu2d_sel)); + clk[gpu3d_gate] = imx_clk_gate2("gpu3d_gate", "gpu3d_sel", MXC_CCM_CCGR5, 2); + clk[garb_gate] = imx_clk_gate2("garb_gate", "axi_a", MXC_CCM_CCGR5, 4); + clk[gpu2d_gate] = imx_clk_gate2("gpu2d_gate", "gpu2d_sel", MXC_CCM_CCGR6, 14); clk[vpu_s] = imx_clk_mux("vpu_sel", MXC_CCM_CBCMR, 14, 2, vpu_sel, ARRAY_SIZE(vpu_sel)); clk[vpu_gate] = imx_clk_gate2("vpu_gate", "vpu_sel", MXC_CCM_CCGR5, 6); clk[vpu_reference_gate] = imx_clk_gate2("vpu_reference_gate", "osc", MXC_CCM_CCGR5, 8); @@ -235,6 +265,8 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, clk[epit2_ipg_gate] = imx_clk_gate2("epit2_ipg_gate", "ipg", MXC_CCM_CCGR2, 6); clk[epit2_hf_gate] = imx_clk_gate2("epit2_hf_gate", "per_root", MXC_CCM_CCGR2, 8); clk[owire_gate] = imx_clk_gate2("owire_gate", "per_root", MXC_CCM_CCGR2, 22); + clk[srtc_gate] = imx_clk_gate2("srtc_gate", "per_root", MXC_CCM_CCGR4, 28); + clk[pata_gate] = imx_clk_gate2("pata_gate", "ipg", MXC_CCM_CCGR4, 0); for (i = 0; i < ARRAY_SIZE(clk); i++) if (IS_ERR(clk[i])) @@ -281,12 +313,11 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, clk_register_clkdev(clk[ssi_ext1_gate], "ssi_ext1", NULL); clk_register_clkdev(clk[ssi_ext2_gate], "ssi_ext2", NULL); clk_register_clkdev(clk[sdma_gate], NULL, "imx35-sdma"); - clk_register_clkdev(clk[cpu_podf], "cpu", NULL); + clk_register_clkdev(clk[cpu_podf], NULL, "cpufreq-cpu0.0"); clk_register_clkdev(clk[iim_gate], "iim", NULL); clk_register_clkdev(clk[dummy], NULL, "imx2-wdt.0"); clk_register_clkdev(clk[dummy], NULL, "imx2-wdt.1"); clk_register_clkdev(clk[dummy], NULL, "imx-keypad"); - clk_register_clkdev(clk[tve_gate], NULL, "imx-tve.0"); clk_register_clkdev(clk[ipu_di1_gate], "di1", "imx-tve.0"); clk_register_clkdev(clk[gpc_dvfs], "gpc_dvfs", NULL); clk_register_clkdev(clk[epit1_ipg_gate], "ipg", "imx-epit.0"); @@ -331,8 +362,10 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, mx51_ipu_di0_sel, ARRAY_SIZE(mx51_ipu_di0_sel)); clk[ipu_di1_sel] = imx_clk_mux("ipu_di1_sel", MXC_CCM_CSCMR2, 29, 3, mx51_ipu_di1_sel, ARRAY_SIZE(mx51_ipu_di1_sel)); - clk[tve_ext_sel] = imx_clk_mux("tve_ext_sel", MXC_CCM_CSCMR1, 6, 1, - mx51_tve_ext_sel, ARRAY_SIZE(mx51_tve_ext_sel)); + clk[tve_ext_sel] = imx_clk_mux_flags("tve_ext_sel", MXC_CCM_CSCMR1, 6, 1, + mx51_tve_ext_sel, ARRAY_SIZE(mx51_tve_ext_sel), CLK_SET_RATE_PARENT); + clk[tve_s] = imx_clk_mux("tve_sel", MXC_CCM_CSCMR1, 7, 1, + mx51_tve_sel, ARRAY_SIZE(mx51_tve_sel)); clk[tve_gate] = imx_clk_gate2("tve_gate", "tve_sel", MXC_CCM_CCGR2, 30); clk[tve_pred] = imx_clk_divider("tve_pred", "pll3_sw", MXC_CCM_CDCDR, 28, 3); clk[esdhc1_per_gate] = imx_clk_gate2("esdhc1_per_gate", "esdhc_a_podf", MXC_CCM_CCGR3, 2); @@ -362,9 +395,6 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, clk_register_clkdev(clk[mx51_mipi], "mipi_hsp", NULL); clk_register_clkdev(clk[vpu_gate], NULL, "imx51-vpu.0"); clk_register_clkdev(clk[fec_gate], NULL, "imx27-fec.0"); - clk_register_clkdev(clk[ipu_gate], "bus", "40000000.ipu"); - clk_register_clkdev(clk[ipu_di0_gate], "di0", "40000000.ipu"); - clk_register_clkdev(clk[ipu_di1_gate], "di1", "40000000.ipu"); clk_register_clkdev(clk[usb_phy_gate], "phy", "mxc-ehci.0"); clk_register_clkdev(clk[esdhc1_ipg_gate], "ipg", "sdhci-esdhc-imx51.0"); clk_register_clkdev(clk[dummy], "ahb", "sdhci-esdhc-imx51.0"); @@ -423,23 +453,23 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, clk[pll3_sw] = imx_clk_pllv2("pll3_sw", "osc", MX53_DPLL3_BASE); clk[pll4_sw] = imx_clk_pllv2("pll4_sw", "osc", MX53_DPLL4_BASE); - clk[ldb_di1_sel] = imx_clk_mux("ldb_di1_sel", MXC_CCM_CSCMR2, 9, 1, - mx53_ldb_di1_sel, ARRAY_SIZE(mx53_ldb_di1_sel)); clk[ldb_di1_div_3_5] = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7); - clk[ldb_di1_div] = imx_clk_divider("ldb_di1_div", "ldb_di1_div_3_5", MXC_CCM_CSCMR2, 11, 1); + clk[ldb_di1_div] = imx_clk_divider_flags("ldb_di1_div", "ldb_di1_div_3_5", MXC_CCM_CSCMR2, 11, 1, 0); + clk[ldb_di1_sel] = imx_clk_mux_flags("ldb_di1_sel", MXC_CCM_CSCMR2, 9, 1, + mx53_ldb_di1_sel, ARRAY_SIZE(mx53_ldb_di1_sel), CLK_SET_RATE_PARENT); clk[di_pll4_podf] = imx_clk_divider("di_pll4_podf", "pll4_sw", MXC_CCM_CDCDR, 16, 3); - clk[ldb_di0_sel] = imx_clk_mux("ldb_di0_sel", MXC_CCM_CSCMR2, 8, 1, - mx53_ldb_di0_sel, ARRAY_SIZE(mx53_ldb_di0_sel)); clk[ldb_di0_div_3_5] = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7); - clk[ldb_di0_div] = imx_clk_divider("ldb_di0_div", "ldb_di0_div_3_5", MXC_CCM_CSCMR2, 10, 1); + clk[ldb_di0_div] = imx_clk_divider_flags("ldb_di0_div", "ldb_di0_div_3_5", MXC_CCM_CSCMR2, 10, 1, 0); + clk[ldb_di0_sel] = imx_clk_mux_flags("ldb_di0_sel", MXC_CCM_CSCMR2, 8, 1, + mx53_ldb_di0_sel, ARRAY_SIZE(mx53_ldb_di0_sel), CLK_SET_RATE_PARENT); clk[ldb_di0_gate] = imx_clk_gate2("ldb_di0_gate", "ldb_di0_div", MXC_CCM_CCGR6, 28); clk[ldb_di1_gate] = imx_clk_gate2("ldb_di1_gate", "ldb_di1_div", MXC_CCM_CCGR6, 30); clk[ipu_di0_sel] = imx_clk_mux("ipu_di0_sel", MXC_CCM_CSCMR2, 26, 3, mx53_ipu_di0_sel, ARRAY_SIZE(mx53_ipu_di0_sel)); clk[ipu_di1_sel] = imx_clk_mux("ipu_di1_sel", MXC_CCM_CSCMR2, 29, 3, mx53_ipu_di1_sel, ARRAY_SIZE(mx53_ipu_di1_sel)); - clk[tve_ext_sel] = imx_clk_mux("tve_ext_sel", MXC_CCM_CSCMR1, 6, 1, - mx53_tve_ext_sel, ARRAY_SIZE(mx53_tve_ext_sel)); + clk[tve_ext_sel] = imx_clk_mux_flags("tve_ext_sel", MXC_CCM_CSCMR1, 6, 1, + mx53_tve_ext_sel, ARRAY_SIZE(mx53_tve_ext_sel), CLK_SET_RATE_PARENT); clk[tve_gate] = imx_clk_gate2("tve_gate", "tve_pred", MXC_CCM_CCGR2, 30); clk[tve_pred] = imx_clk_divider("tve_pred", "tve_ext_sel", MXC_CCM_CDCDR, 28, 3); clk[esdhc1_per_gate] = imx_clk_gate2("esdhc1_per_gate", "esdhc_a_podf", MXC_CCM_CCGR3, 2); @@ -456,6 +486,16 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, clk[can2_ipg_gate] = imx_clk_gate2("can2_ipg_gate", "ipg", MXC_CCM_CCGR4, 6); clk[i2c3_gate] = imx_clk_gate2("i2c3_gate", "per_root", MXC_CCM_CCGR1, 22); + clk[cko1_sel] = imx_clk_mux("cko1_sel", MXC_CCM_CCOSR, 0, 4, + mx53_cko1_sel, ARRAY_SIZE(mx53_cko1_sel)); + clk[cko1_podf] = imx_clk_divider("cko1_podf", "cko1_sel", MXC_CCM_CCOSR, 4, 3); + clk[cko1] = imx_clk_gate2("cko1", "cko1_podf", MXC_CCM_CCOSR, 7); + + clk[cko2_sel] = imx_clk_mux("cko2_sel", MXC_CCM_CCOSR, 16, 5, + mx53_cko2_sel, ARRAY_SIZE(mx53_cko2_sel)); + clk[cko2_podf] = imx_clk_divider("cko2_podf", "cko2_sel", MXC_CCM_CCOSR, 21, 3); + clk[cko2] = imx_clk_gate2("cko2", "cko2_podf", MXC_CCM_CCOSR, 24); + for (i = 0; i < ARRAY_SIZE(clk); i++) if (IS_ERR(clk[i])) pr_err("i.MX53 clk %d: register failed with %ld\n", @@ -471,10 +511,6 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, clk_register_clkdev(clk[vpu_gate], NULL, "imx53-vpu.0"); clk_register_clkdev(clk[i2c3_gate], NULL, "imx21-i2c.2"); clk_register_clkdev(clk[fec_gate], NULL, "imx25-fec.0"); - clk_register_clkdev(clk[ipu_gate], "bus", "18000000.ipu"); - clk_register_clkdev(clk[ipu_di0_gate], "di0", "18000000.ipu"); - clk_register_clkdev(clk[ipu_di1_gate], "di1", "18000000.ipu"); - clk_register_clkdev(clk[ipu_gate], "hsp", "18000000.ipu"); clk_register_clkdev(clk[usb_phy1_gate], "usb_phy1", "mxc-ehci.0"); clk_register_clkdev(clk[esdhc1_ipg_gate], "ipg", "sdhci-esdhc-imx53.0"); clk_register_clkdev(clk[dummy], "ahb", "sdhci-esdhc-imx53.0"); diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index d38e54f5b6d7..151259003086 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -1,5 +1,5 @@ /* - * Copyright 2011 Freescale Semiconductor, Inc. + * Copyright 2011-2013 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. * * The code contained herein is licensed under the GNU General Public @@ -14,6 +14,7 @@ #include <linux/types.h> #include <linux/clk.h> #include <linux/clkdev.h> +#include <linux/delay.h> #include <linux/err.h> #include <linux/io.h> #include <linux/of.h> @@ -22,6 +23,12 @@ #include "clk.h" #include "common.h" +#include "hardware.h" + +#define CCR 0x0 +#define BM_CCR_WB_COUNT (0x7 << 16) +#define BM_CCR_RBC_BYPASS_COUNT (0x3f << 21) +#define BM_CCR_RBC_EN (0x1 << 27) #define CCGR0 0x68 #define CCGR1 0x6c @@ -67,6 +74,67 @@ void imx6q_set_chicken_bit(void) writel_relaxed(val, ccm_base + CGPR); } +static void imx6q_enable_rbc(bool enable) +{ + u32 val; + static bool last_rbc_mode; + + if (last_rbc_mode == enable) + return; + /* + * need to mask all interrupts in GPC before + * operating RBC configurations + */ + imx_gpc_mask_all(); + + /* configure RBC enable bit */ + val = readl_relaxed(ccm_base + CCR); + val &= ~BM_CCR_RBC_EN; + val |= enable ? BM_CCR_RBC_EN : 0; + writel_relaxed(val, ccm_base + CCR); + + /* configure RBC count */ + val = readl_relaxed(ccm_base + CCR); + val &= ~BM_CCR_RBC_BYPASS_COUNT; + val |= enable ? BM_CCR_RBC_BYPASS_COUNT : 0; + writel(val, ccm_base + CCR); + + /* + * need to delay at least 2 cycles of CKIL(32K) + * due to hardware design requirement, which is + * ~61us, here we use 65us for safe + */ + udelay(65); + + /* restore GPC interrupt mask settings */ + imx_gpc_restore_all(); + + last_rbc_mode = enable; +} + +static void imx6q_enable_wb(bool enable) +{ + u32 val; + static bool last_wb_mode; + + if (last_wb_mode == enable) + return; + + /* configure well bias enable bit */ + val = readl_relaxed(ccm_base + CLPCR); + val &= ~BM_CLPCR_WB_PER_AT_LPM; + val |= enable ? BM_CLPCR_WB_PER_AT_LPM : 0; + writel_relaxed(val, ccm_base + CLPCR); + + /* configure well bias count */ + val = readl_relaxed(ccm_base + CCR); + val &= ~BM_CCR_WB_COUNT; + val |= enable ? BM_CCR_WB_COUNT : 0; + writel_relaxed(val, ccm_base + CCR); + + last_wb_mode = enable; +} + int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode) { u32 val = readl_relaxed(ccm_base + CLPCR); @@ -74,6 +142,8 @@ int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode) val &= ~BM_CLPCR_LPM; switch (mode) { case WAIT_CLOCKED: + imx6q_enable_wb(false); + imx6q_enable_rbc(false); break; case WAIT_UNCLOCKED: val |= 0x1 << BP_CLPCR_LPM; @@ -92,6 +162,8 @@ int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode) val |= 0x3 << BP_CLPCR_STBY_COUNT; val |= BM_CLPCR_VSTBY; val |= BM_CLPCR_SBYOS; + imx6q_enable_wb(true); + imx6q_enable_rbc(true); break; default: return -EINVAL; @@ -109,29 +181,29 @@ static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", }; static const char *periph_sels[] = { "periph_pre", "periph_clk2", }; static const char *periph2_sels[] = { "periph2_pre", "periph2_clk2", }; static const char *axi_sels[] = { "periph", "pll2_pfd2_396m", "pll3_pfd1_540m", }; -static const char *audio_sels[] = { "pll4_audio", "pll3_pfd2_508m", "pll3_pfd3_454m", "pll3_usb_otg", }; +static const char *audio_sels[] = { "pll4_post_div", "pll3_pfd2_508m", "pll3_pfd3_454m", "pll3_usb_otg", }; static const char *gpu_axi_sels[] = { "axi", "ahb", }; static const char *gpu2d_core_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", }; static const char *gpu3d_core_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd2_396m", }; static const char *gpu3d_shader_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd9_720m", }; static const char *ipu_sels[] = { "mmdc_ch0_axi", "pll2_pfd2_396m", "pll3_120m", "pll3_pfd1_540m", }; static const char *ldb_di_sels[] = { "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "mmdc_ch1_axi", "pll3_usb_otg", }; -static const char *ipu_di_pre_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd1_540m", }; +static const char *ipu_di_pre_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd1_540m", }; static const char *ipu1_di0_sels[] = { "ipu1_di0_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", }; static const char *ipu1_di1_sels[] = { "ipu1_di1_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", }; static const char *ipu2_di0_sels[] = { "ipu2_di0_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", }; static const char *ipu2_di1_sels[] = { "ipu2_di1_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", }; static const char *hsi_tx_sels[] = { "pll3_120m", "pll2_pfd2_396m", }; static const char *pcie_axi_sels[] = { "axi", "ahb", }; -static const char *ssi_sels[] = { "pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_audio", }; +static const char *ssi_sels[] = { "pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_post_div", }; static const char *usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", }; static const char *enfc_sels[] = { "pll2_pfd0_352m", "pll2_bus", "pll3_usb_otg", "pll2_pfd2_396m", }; static const char *emi_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd2_396m", "pll2_pfd0_352m", }; static const char *vdo_axi_sels[] = { "axi", "ahb", }; static const char *vpu_axi_sels[] = { "axi", "pll2_pfd2_396m", "pll2_pfd0_352m", }; -static const char *cko1_sels[] = { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_video", +static const char *cko1_sels[] = { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_video_div", "dummy", "axi", "enfc", "ipu1_di0", "ipu1_di1", "ipu2_di0", - "ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_audio", }; + "ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_post_div", }; enum mx6q_clks { dummy, ckil, ckih, osc, pll2_pfd0_352m, pll2_pfd1_594m, pll2_pfd2_396m, @@ -165,7 +237,7 @@ enum mx6q_clks { pll4_audio, pll5_video, pll8_mlb, pll7_usb_host, pll6_enet, ssi1_ipg, ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5, sata_ref, sata_ref_100m, pcie_ref, pcie_ref_125m, enet_ref, usbphy1_gate, - usbphy2_gate, clk_max + usbphy2_gate, pll4_post_div, pll5_post_div, pll5_video_div, clk_max }; static struct clk *clk[clk_max]; @@ -182,6 +254,21 @@ static struct clk_div_table clk_enet_ref_table[] = { { .val = 3, .div = 4, }, }; +static struct clk_div_table post_div_table[] = { + { .val = 2, .div = 1, }, + { .val = 1, .div = 2, }, + { .val = 0, .div = 4, }, + { } +}; + +static struct clk_div_table video_div_table[] = { + { .val = 0, .div = 1, }, + { .val = 1, .div = 2, }, + { .val = 2, .div = 1, }, + { .val = 3, .div = 4, }, + { } +}; + int __init mx6q_clocks_init(void) { struct device_node *np; @@ -208,6 +295,14 @@ int __init mx6q_clocks_init(void) base = of_iomap(np, 0); WARN_ON(!base); + /* Audio/video PLL post dividers do not work on i.MX6q revision 1.0 */ + if (cpu_is_imx6q() && imx6q_revision() == IMX_CHIP_REVISION_1_0) { + post_div_table[1].div = 1; + post_div_table[2].div = 1; + video_div_table[1].div = 1; + video_div_table[2].div = 1; + }; + /* type name parent_name base div_mask */ clk[pll1_sys] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1_sys", "osc", base, 0x7f); clk[pll2_bus] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2_bus", "osc", base + 0x30, 0x1); @@ -260,6 +355,10 @@ int __init mx6q_clocks_init(void) clk[pll3_60m] = imx_clk_fixed_factor("pll3_60m", "pll3_usb_otg", 1, 8); clk[twd] = imx_clk_fixed_factor("twd", "arm", 1, 2); + clk[pll4_post_div] = clk_register_divider_table(NULL, "pll4_post_div", "pll4_audio", CLK_SET_RATE_PARENT, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock); + clk[pll5_post_div] = clk_register_divider_table(NULL, "pll5_post_div", "pll5_video", CLK_SET_RATE_PARENT, base + 0xa0, 19, 2, 0, post_div_table, &imx_ccm_lock); + clk[pll5_video_div] = clk_register_divider_table(NULL, "pll5_video_div", "pll5_post_div", CLK_SET_RATE_PARENT, base + 0x170, 30, 2, 0, video_div_table, &imx_ccm_lock); + np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-ccm"); base = of_iomap(np, 0); WARN_ON(!base); @@ -283,8 +382,8 @@ int __init mx6q_clocks_init(void) clk[gpu3d_shader_sel] = imx_clk_mux("gpu3d_shader_sel", base + 0x18, 8, 2, gpu3d_shader_sels, ARRAY_SIZE(gpu3d_shader_sels)); clk[ipu1_sel] = imx_clk_mux("ipu1_sel", base + 0x3c, 9, 2, ipu_sels, ARRAY_SIZE(ipu_sels)); clk[ipu2_sel] = imx_clk_mux("ipu2_sel", base + 0x3c, 14, 2, ipu_sels, ARRAY_SIZE(ipu_sels)); - clk[ldb_di0_sel] = imx_clk_mux("ldb_di0_sel", base + 0x2c, 9, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels)); - clk[ldb_di1_sel] = imx_clk_mux("ldb_di1_sel", base + 0x2c, 12, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels)); + clk[ldb_di0_sel] = imx_clk_mux_flags("ldb_di0_sel", base + 0x2c, 9, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels), CLK_SET_RATE_PARENT); + clk[ldb_di1_sel] = imx_clk_mux_flags("ldb_di1_sel", base + 0x2c, 12, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels), CLK_SET_RATE_PARENT); clk[ipu1_di0_pre_sel] = imx_clk_mux("ipu1_di0_pre_sel", base + 0x34, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels)); clk[ipu1_di1_pre_sel] = imx_clk_mux("ipu1_di1_pre_sel", base + 0x34, 15, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels)); clk[ipu2_di0_pre_sel] = imx_clk_mux("ipu2_di0_pre_sel", base + 0x38, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels)); @@ -332,9 +431,9 @@ int __init mx6q_clocks_init(void) clk[ipu1_podf] = imx_clk_divider("ipu1_podf", "ipu1_sel", base + 0x3c, 11, 3); clk[ipu2_podf] = imx_clk_divider("ipu2_podf", "ipu2_sel", base + 0x3c, 16, 3); clk[ldb_di0_div_3_5] = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7); - clk[ldb_di0_podf] = imx_clk_divider("ldb_di0_podf", "ldb_di0_div_3_5", base + 0x20, 10, 1); + clk[ldb_di0_podf] = imx_clk_divider_flags("ldb_di0_podf", "ldb_di0_div_3_5", base + 0x20, 10, 1, 0); clk[ldb_di1_div_3_5] = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7); - clk[ldb_di1_podf] = imx_clk_divider("ldb_di1_podf", "ldb_di1_div_3_5", base + 0x20, 11, 1); + clk[ldb_di1_podf] = imx_clk_divider_flags("ldb_di1_podf", "ldb_di1_div_3_5", base + 0x20, 11, 1, 0); clk[ipu1_di0_pre] = imx_clk_divider("ipu1_di0_pre", "ipu1_di0_pre_sel", base + 0x34, 3, 3); clk[ipu1_di1_pre] = imx_clk_divider("ipu1_di1_pre", "ipu1_di1_pre_sel", base + 0x34, 12, 3); clk[ipu2_di0_pre] = imx_clk_divider("ipu2_di0_pre", "ipu2_di0_pre_sel", base + 0x38, 3, 3); @@ -448,6 +547,11 @@ int __init mx6q_clocks_init(void) clk_register_clkdev(clk[cko1], "cko1", NULL); clk_register_clkdev(clk[arm], NULL, "cpu0"); + if (imx6q_revision() != IMX_CHIP_REVISION_1_0) { + clk_set_parent(clk[ldb_di0_sel], clk[pll5_video_div]); + clk_set_parent(clk[ldb_di1_sel], clk[pll5_video_div]); + } + /* * The gpmi needs 100MHz frequency in the EDO/Sync mode, * We can not get the 100MHz from the pll2_pfd0_352m. diff --git a/arch/arm/mach-imx/clk-pllv1.c b/arch/arm/mach-imx/clk-pllv1.c index abff350ba24c..c1eaee346954 100644 --- a/arch/arm/mach-imx/clk-pllv1.c +++ b/arch/arm/mach-imx/clk-pllv1.c @@ -78,7 +78,7 @@ static unsigned long clk_pllv1_recalc_rate(struct clk_hw *hw, return ll; } -struct clk_ops clk_pllv1_ops = { +static struct clk_ops clk_pllv1_ops = { .recalc_rate = clk_pllv1_recalc_rate, }; diff --git a/arch/arm/mach-imx/clk-pllv2.c b/arch/arm/mach-imx/clk-pllv2.c index 0440379e3628..20889d59b44d 100644 --- a/arch/arm/mach-imx/clk-pllv2.c +++ b/arch/arm/mach-imx/clk-pllv2.c @@ -229,7 +229,7 @@ static void clk_pllv2_unprepare(struct clk_hw *hw) __raw_writel(reg, pllbase + MXC_PLL_DP_CTL); } -struct clk_ops clk_pllv2_ops = { +static struct clk_ops clk_pllv2_ops = { .prepare = clk_pllv2_prepare, .unprepare = clk_pllv2_unprepare, .recalc_rate = clk_pllv2_recalc_rate, diff --git a/arch/arm/mach-imx/clk.c b/arch/arm/mach-imx/clk.c index f5e8be8e7f11..37e884ed1cd4 100644 --- a/arch/arm/mach-imx/clk.c +++ b/arch/arm/mach-imx/clk.c @@ -1,3 +1,4 @@ #include <linux/spinlock.h> +#include "clk.h" DEFINE_SPINLOCK(imx_ccm_lock); diff --git a/arch/arm/mach-imx/clk.h b/arch/arm/mach-imx/clk.h index 9d1f3b99d1d3..d9d9d9c66dff 100644 --- a/arch/arm/mach-imx/clk.h +++ b/arch/arm/mach-imx/clk.h @@ -59,6 +59,14 @@ static inline struct clk *imx_clk_divider(const char *name, const char *parent, reg, shift, width, 0, &imx_ccm_lock); } +static inline struct clk *imx_clk_divider_flags(const char *name, + const char *parent, void __iomem *reg, u8 shift, u8 width, + unsigned long flags) +{ + return clk_register_divider(NULL, name, parent, flags, + reg, shift, width, 0, &imx_ccm_lock); +} + static inline struct clk *imx_clk_gate(const char *name, const char *parent, void __iomem *reg, u8 shift) { @@ -73,6 +81,15 @@ static inline struct clk *imx_clk_mux(const char *name, void __iomem *reg, width, 0, &imx_ccm_lock); } +static inline struct clk *imx_clk_mux_flags(const char *name, + void __iomem *reg, u8 shift, u8 width, const char **parents, + int num_parents, unsigned long flags) +{ + return clk_register_mux(NULL, name, parents, num_parents, + flags, reg, shift, width, 0, + &imx_ccm_lock); +} + static inline struct clk *imx_clk_fixed_factor(const char *name, const char *parent, unsigned int mult, unsigned int div) { diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index 5bf4a97ab241..4cba7dbb079f 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -1,5 +1,5 @@ /* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2004-2013 Freescale Semiconductor, Inc. All Rights Reserved. */ /* @@ -74,6 +74,7 @@ extern void mxc_set_cpu_type(unsigned int type); extern void mxc_restart(char, const char *); extern void mxc_arch_reset_init(void __iomem *); extern int mx53_revision(void); +extern int imx6q_revision(void); extern int mx53_display_revision(void); extern void imx_set_aips(void __iomem *); extern int mxc_device_init(void); @@ -113,7 +114,6 @@ extern void imx_set_cpu_jump(int cpu, void *jump_addr); extern u32 imx_get_cpu_arg(int cpu); extern void imx_set_cpu_arg(int cpu, u32 arg); extern void v7_cpu_resume(void); -extern u32 *pl310_get_save_ptr(void); #ifdef CONFIG_SMP extern void v7_secondary_startup(void); extern void imx_scu_map_io(void); @@ -124,13 +124,18 @@ static inline void imx_scu_map_io(void) {} static inline void imx_smp_prepare(void) {} static inline void imx_scu_standby_enable(void) {} #endif -extern void imx_enable_cpu(int cpu, bool enable); -extern void imx_set_cpu_jump(int cpu, void *jump_addr); extern void imx_src_init(void); extern void imx_src_prepare_restart(void); extern void imx_gpc_init(void); extern void imx_gpc_pre_suspend(void); extern void imx_gpc_post_resume(void); +extern void imx_gpc_mask_all(void); +extern void imx_gpc_restore_all(void); +extern void imx_anatop_init(void); +extern void imx_anatop_pre_suspend(void); +extern void imx_anatop_post_resume(void); +extern void imx_anatop_usb_chrg_detect_disable(void); +extern u32 imx_anatop_get_digprog(void); extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode); extern void imx6q_set_chicken_bit(void); diff --git a/arch/arm/mach-imx/cpu-imx5.c b/arch/arm/mach-imx/cpu-imx5.c index d7ce72252a4e..c1c99a72c6a1 100644 --- a/arch/arm/mach-imx/cpu-imx5.c +++ b/arch/arm/mach-imx/cpu-imx5.c @@ -18,6 +18,7 @@ #include <linux/io.h> #include "hardware.h" +#include "common.h" static int mx5_cpu_rev = -1; diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c index 03fcbd082593..e70e3acbf9bd 100644 --- a/arch/arm/mach-imx/cpu.c +++ b/arch/arm/mach-imx/cpu.c @@ -3,6 +3,7 @@ #include <linux/io.h> #include "hardware.h" +#include "common.h" unsigned int __mxc_cpu_type; EXPORT_SYMBOL(__mxc_cpu_type); diff --git a/arch/arm/mach-imx/cpu_op-mx51.c b/arch/arm/mach-imx/cpu_op-mx51.c deleted file mode 100644 index b9ef692b61a2..000000000000 --- a/arch/arm/mach-imx/cpu_op-mx51.c +++ /dev/null @@ -1,31 +0,0 @@ -/* - * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -#include <linux/bug.h> -#include <linux/types.h> -#include <linux/kernel.h> - -#include "hardware.h" - -static struct cpu_op mx51_cpu_op[] = { - { - .cpu_rate = 160000000,}, - { - .cpu_rate = 800000000,}, -}; - -struct cpu_op *mx51_get_cpu_op(int *op) -{ - *op = ARRAY_SIZE(mx51_cpu_op); - return mx51_cpu_op; -} diff --git a/arch/arm/mach-imx/cpu_op-mx51.h b/arch/arm/mach-imx/cpu_op-mx51.h deleted file mode 100644 index 97477fecb469..000000000000 --- a/arch/arm/mach-imx/cpu_op-mx51.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -extern struct cpu_op *mx51_get_cpu_op(int *op); diff --git a/arch/arm/mach-imx/cpufreq.c b/arch/arm/mach-imx/cpufreq.c deleted file mode 100644 index d8c75c3c925d..000000000000 --- a/arch/arm/mach-imx/cpufreq.c +++ /dev/null @@ -1,206 +0,0 @@ -/* - * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -/* - * A driver for the Freescale Semiconductor i.MXC CPUfreq module. - * The CPUFREQ driver is for controlling CPU frequency. It allows you to change - * the CPU clock speed on the fly. - */ - -#include <linux/module.h> -#include <linux/cpufreq.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/slab.h> - -#include "hardware.h" - -#define CLK32_FREQ 32768 -#define NANOSECOND (1000 * 1000 * 1000) - -struct cpu_op *(*get_cpu_op)(int *op); - -static int cpu_freq_khz_min; -static int cpu_freq_khz_max; - -static struct clk *cpu_clk; -static struct cpufreq_frequency_table *imx_freq_table; - -static int cpu_op_nr; -static struct cpu_op *cpu_op_tbl; - -static int set_cpu_freq(int freq) -{ - int ret = 0; - int org_cpu_rate; - - org_cpu_rate = clk_get_rate(cpu_clk); - if (org_cpu_rate == freq) - return ret; - - ret = clk_set_rate(cpu_clk, freq); - if (ret != 0) { - printk(KERN_DEBUG "cannot set CPU clock rate\n"); - return ret; - } - - return ret; -} - -static int mxc_verify_speed(struct cpufreq_policy *policy) -{ - if (policy->cpu != 0) - return -EINVAL; - - return cpufreq_frequency_table_verify(policy, imx_freq_table); -} - -static unsigned int mxc_get_speed(unsigned int cpu) -{ - if (cpu) - return 0; - - return clk_get_rate(cpu_clk) / 1000; -} - -static int mxc_set_target(struct cpufreq_policy *policy, - unsigned int target_freq, unsigned int relation) -{ - struct cpufreq_freqs freqs; - int freq_Hz; - int ret = 0; - unsigned int index; - - cpufreq_frequency_table_target(policy, imx_freq_table, - target_freq, relation, &index); - freq_Hz = imx_freq_table[index].frequency * 1000; - - freqs.old = clk_get_rate(cpu_clk) / 1000; - freqs.new = freq_Hz / 1000; - freqs.cpu = 0; - freqs.flags = 0; - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - ret = set_cpu_freq(freq_Hz); - - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - return ret; -} - -static int mxc_cpufreq_init(struct cpufreq_policy *policy) -{ - int ret; - int i; - - printk(KERN_INFO "i.MXC CPU frequency driver\n"); - - if (policy->cpu != 0) - return -EINVAL; - - if (!get_cpu_op) - return -EINVAL; - - cpu_clk = clk_get(NULL, "cpu_clk"); - if (IS_ERR(cpu_clk)) { - printk(KERN_ERR "%s: failed to get cpu clock\n", __func__); - return PTR_ERR(cpu_clk); - } - - cpu_op_tbl = get_cpu_op(&cpu_op_nr); - - cpu_freq_khz_min = cpu_op_tbl[0].cpu_rate / 1000; - cpu_freq_khz_max = cpu_op_tbl[0].cpu_rate / 1000; - - imx_freq_table = kmalloc( - sizeof(struct cpufreq_frequency_table) * (cpu_op_nr + 1), - GFP_KERNEL); - if (!imx_freq_table) { - ret = -ENOMEM; - goto err1; - } - - for (i = 0; i < cpu_op_nr; i++) { - imx_freq_table[i].index = i; - imx_freq_table[i].frequency = cpu_op_tbl[i].cpu_rate / 1000; - - if ((cpu_op_tbl[i].cpu_rate / 1000) < cpu_freq_khz_min) - cpu_freq_khz_min = cpu_op_tbl[i].cpu_rate / 1000; - - if ((cpu_op_tbl[i].cpu_rate / 1000) > cpu_freq_khz_max) - cpu_freq_khz_max = cpu_op_tbl[i].cpu_rate / 1000; - } - - imx_freq_table[i].index = i; - imx_freq_table[i].frequency = CPUFREQ_TABLE_END; - - policy->cur = clk_get_rate(cpu_clk) / 1000; - policy->min = policy->cpuinfo.min_freq = cpu_freq_khz_min; - policy->max = policy->cpuinfo.max_freq = cpu_freq_khz_max; - - /* Manual states, that PLL stabilizes in two CLK32 periods */ - policy->cpuinfo.transition_latency = 2 * NANOSECOND / CLK32_FREQ; - - ret = cpufreq_frequency_table_cpuinfo(policy, imx_freq_table); - - if (ret < 0) { - printk(KERN_ERR "%s: failed to register i.MXC CPUfreq with error code %d\n", - __func__, ret); - goto err; - } - - cpufreq_frequency_table_get_attr(imx_freq_table, policy->cpu); - return 0; -err: - kfree(imx_freq_table); -err1: - clk_put(cpu_clk); - return ret; -} - -static int mxc_cpufreq_exit(struct cpufreq_policy *policy) -{ - cpufreq_frequency_table_put_attr(policy->cpu); - - set_cpu_freq(cpu_freq_khz_max * 1000); - clk_put(cpu_clk); - kfree(imx_freq_table); - return 0; -} - -static struct cpufreq_driver mxc_driver = { - .flags = CPUFREQ_STICKY, - .verify = mxc_verify_speed, - .target = mxc_set_target, - .get = mxc_get_speed, - .init = mxc_cpufreq_init, - .exit = mxc_cpufreq_exit, - .name = "imx", -}; - -static int mxc_cpufreq_driver_init(void) -{ - return cpufreq_register_driver(&mxc_driver); -} - -static void mxc_cpufreq_driver_exit(void) -{ - cpufreq_unregister_driver(&mxc_driver); -} - -module_init(mxc_cpufreq_driver_init); -module_exit(mxc_cpufreq_driver_exit); - -MODULE_AUTHOR("Freescale Semiconductor Inc. Yong Shen <yong.shen@linaro.org>"); -MODULE_DESCRIPTION("CPUfreq driver for i.MX"); -MODULE_LICENSE("GPL"); diff --git a/arch/arm/mach-imx/cpuidle-imx5.c b/arch/arm/mach-imx/cpuidle-imx5.c new file mode 100644 index 000000000000..5a47e3c6172f --- /dev/null +++ b/arch/arm/mach-imx/cpuidle-imx5.c @@ -0,0 +1,37 @@ +/* + * Copyright (C) 2012 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/cpuidle.h> +#include <linux/module.h> +#include <asm/system_misc.h> + +static int imx5_cpuidle_enter(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index) +{ + arm_pm_idle(); + return index; +} + +static struct cpuidle_driver imx5_cpuidle_driver = { + .name = "imx5_cpuidle", + .owner = THIS_MODULE, + .states[0] = { + .enter = imx5_cpuidle_enter, + .exit_latency = 2, + .target_residency = 1, + .flags = CPUIDLE_FLAG_TIME_VALID, + .name = "IMX5 SRPG", + .desc = "CPU state retained,powered off", + }, + .state_count = 1, +}; + +int __init imx5_cpuidle_init(void) +{ + return cpuidle_register(&imx5_cpuidle_driver, NULL); +} diff --git a/arch/arm/mach-imx/cpuidle-imx6q.c b/arch/arm/mach-imx/cpuidle-imx6q.c index d533e2695f0e..23ddfb693b2d 100644 --- a/arch/arm/mach-imx/cpuidle-imx6q.c +++ b/arch/arm/mach-imx/cpuidle-imx6q.c @@ -6,7 +6,6 @@ * published by the Free Software Foundation. */ -#include <linux/clockchips.h> #include <linux/cpuidle.h> #include <linux/module.h> #include <asm/cpuidle.h> @@ -21,10 +20,6 @@ static DEFINE_SPINLOCK(master_lock); static int imx6q_enter_wait(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) { - int cpu = dev->cpu; - - clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu); - if (atomic_inc_return(&master) == num_online_cpus()) { /* * With this lock, we prevent other cpu to exit and enter @@ -43,26 +38,13 @@ idle: cpu_do_idle(); done: atomic_dec(&master); - clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu); return index; } -/* - * For each cpu, setup the broadcast timer because local timer - * stops for the states other than WFI. - */ -static void imx6q_setup_broadcast_timer(void *arg) -{ - int cpu = smp_processor_id(); - - clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ON, &cpu); -} - static struct cpuidle_driver imx6q_cpuidle_driver = { .name = "imx6q_cpuidle", .owner = THIS_MODULE, - .en_core_tk_irqen = 1, .states = { /* WFI */ ARM_CPUIDLE_WFI_STATE, @@ -70,7 +52,8 @@ static struct cpuidle_driver imx6q_cpuidle_driver = { { .exit_latency = 50, .target_residency = 75, - .flags = CPUIDLE_FLAG_TIME_VALID, + .flags = CPUIDLE_FLAG_TIME_VALID | + CPUIDLE_FLAG_TIMER_STOP, .enter = imx6q_enter_wait, .name = "WAIT", .desc = "Clock off", @@ -88,8 +71,5 @@ int __init imx6q_cpuidle_init(void) /* Set chicken bit to get a reliable WAIT mode support */ imx6q_set_chicken_bit(); - /* Configure the broadcast timer on each cpu */ - on_each_cpu(imx6q_setup_broadcast_timer, NULL, 1); - - return imx_cpuidle_init(&imx6q_cpuidle_driver); + return cpuidle_register(&imx6q_cpuidle_driver, NULL); } diff --git a/arch/arm/mach-imx/cpuidle.c b/arch/arm/mach-imx/cpuidle.c deleted file mode 100644 index d4cb511a44a8..000000000000 --- a/arch/arm/mach-imx/cpuidle.c +++ /dev/null @@ -1,80 +0,0 @@ -/* - * Copyright 2012 Freescale Semiconductor, Inc. - * Copyright 2012 Linaro Ltd. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -#include <linux/cpuidle.h> -#include <linux/err.h> -#include <linux/hrtimer.h> -#include <linux/io.h> -#include <linux/kernel.h> -#include <linux/slab.h> - -static struct cpuidle_device __percpu * imx_cpuidle_devices; - -static void __init imx_cpuidle_devices_uninit(void) -{ - int cpu_id; - struct cpuidle_device *dev; - - for_each_possible_cpu(cpu_id) { - dev = per_cpu_ptr(imx_cpuidle_devices, cpu_id); - cpuidle_unregister_device(dev); - } - - free_percpu(imx_cpuidle_devices); -} - -int __init imx_cpuidle_init(struct cpuidle_driver *drv) -{ - struct cpuidle_device *dev; - int cpu_id, ret; - - if (drv->state_count > CPUIDLE_STATE_MAX) { - pr_err("%s: state_count exceeds maximum\n", __func__); - return -EINVAL; - } - - ret = cpuidle_register_driver(drv); - if (ret) { - pr_err("%s: Failed to register cpuidle driver with error: %d\n", - __func__, ret); - return ret; - } - - imx_cpuidle_devices = alloc_percpu(struct cpuidle_device); - if (imx_cpuidle_devices == NULL) { - ret = -ENOMEM; - goto unregister_drv; - } - - /* initialize state data for each cpuidle_device */ - for_each_possible_cpu(cpu_id) { - dev = per_cpu_ptr(imx_cpuidle_devices, cpu_id); - dev->cpu = cpu_id; - dev->state_count = drv->state_count; - - ret = cpuidle_register_device(dev); - if (ret) { - pr_err("%s: Failed to register cpu %u, error: %d\n", - __func__, cpu_id, ret); - goto uninit; - } - } - - return 0; - -uninit: - imx_cpuidle_devices_uninit(); - -unregister_drv: - cpuidle_unregister_driver(drv); - return ret; -} diff --git a/arch/arm/mach-imx/cpuidle.h b/arch/arm/mach-imx/cpuidle.h index e092d1359d94..786f98ecc145 100644 --- a/arch/arm/mach-imx/cpuidle.h +++ b/arch/arm/mach-imx/cpuidle.h @@ -10,18 +10,16 @@ * http://www.gnu.org/copyleft/gpl.html */ -#include <linux/cpuidle.h> - #ifdef CONFIG_CPU_IDLE -extern int imx_cpuidle_init(struct cpuidle_driver *drv); +extern int imx5_cpuidle_init(void); extern int imx6q_cpuidle_init(void); #else -static inline int imx_cpuidle_init(struct cpuidle_driver *drv) +static inline int imx5_cpuidle_init(void) { - return -ENODEV; + return 0; } static inline int imx6q_cpuidle_init(void) { - return -ENODEV; + return 0; } #endif diff --git a/arch/arm/mach-imx/devices/Kconfig b/arch/arm/mach-imx/devices/Kconfig index 9b9ba1f4ffe1..3dd2b1b041d1 100644 --- a/arch/arm/mach-imx/devices/Kconfig +++ b/arch/arm/mach-imx/devices/Kconfig @@ -86,7 +86,3 @@ config IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX config IMX_HAVE_PLATFORM_SPI_IMX bool - -config IMX_HAVE_PLATFORM_AHCI - bool - default y if ARCH_MX53 diff --git a/arch/arm/mach-imx/devices/Makefile b/arch/arm/mach-imx/devices/Makefile index 6acf37e0c119..67416fb1dc69 100644 --- a/arch/arm/mach-imx/devices/Makefile +++ b/arch/arm/mach-imx/devices/Makefile @@ -29,5 +29,4 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_RTC) += platform-mxc_rtc.o obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_W1) += platform-mxc_w1.o obj-$(CONFIG_IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX) += platform-sdhci-esdhc-imx.o obj-$(CONFIG_IMX_HAVE_PLATFORM_SPI_IMX) += platform-spi_imx.o -obj-$(CONFIG_IMX_HAVE_PLATFORM_AHCI) += platform-ahci-imx.o obj-$(CONFIG_IMX_HAVE_PLATFORM_MX2_EMMA) += platform-mx2-emma.o diff --git a/arch/arm/mach-imx/devices/devices-common.h b/arch/arm/mach-imx/devices/devices-common.h index 9bd5777ff0e7..453e20bc2657 100644 --- a/arch/arm/mach-imx/devices/devices-common.h +++ b/arch/arm/mach-imx/devices/devices-common.h @@ -344,13 +344,3 @@ struct platform_device *imx_add_imx_dma(char *name, resource_size_t iobase, int irq, int irq_err); struct platform_device *imx_add_imx_sdma(char *name, resource_size_t iobase, int irq, struct sdma_platform_data *pdata); - -#include <linux/ahci_platform.h> -struct imx_ahci_imx_data { - const char *devid; - resource_size_t iobase; - resource_size_t irq; -}; -struct platform_device *__init imx_add_ahci_imx( - const struct imx_ahci_imx_data *data, - const struct ahci_platform_data *pdata); diff --git a/arch/arm/mach-imx/devices/devices.c b/arch/arm/mach-imx/devices/devices.c index 1b37482407f9..1b4366a0e7c0 100644 --- a/arch/arm/mach-imx/devices/devices.c +++ b/arch/arm/mach-imx/devices/devices.c @@ -37,7 +37,7 @@ int __init mxc_device_init(void) int ret; ret = device_register(&mxc_aips_bus); - if (IS_ERR_VALUE(ret)) + if (ret < 0) goto done; ret = device_register(&mxc_ahb_bus); diff --git a/arch/arm/mach-imx/devices/platform-ahci-imx.c b/arch/arm/mach-imx/devices/platform-ahci-imx.c deleted file mode 100644 index 3d87dd9c284a..000000000000 --- a/arch/arm/mach-imx/devices/platform-ahci-imx.c +++ /dev/null @@ -1,157 +0,0 @@ -/* - * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#include <linux/io.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/device.h> -#include <linux/dma-mapping.h> -#include <asm/sizes.h> - -#include "../hardware.h" -#include "devices-common.h" - -#define imx_ahci_imx_data_entry_single(soc, _devid) \ - { \ - .devid = _devid, \ - .iobase = soc ## _SATA_BASE_ADDR, \ - .irq = soc ## _INT_SATA, \ - } - -#ifdef CONFIG_SOC_IMX53 -const struct imx_ahci_imx_data imx53_ahci_imx_data __initconst = - imx_ahci_imx_data_entry_single(MX53, "imx53-ahci"); -#endif - -enum { - HOST_CAP = 0x00, - HOST_CAP_SSS = (1 << 27), /* Staggered Spin-up */ - HOST_PORTS_IMPL = 0x0c, - HOST_TIMER1MS = 0xe0, /* Timer 1-ms */ -}; - -static struct clk *sata_clk, *sata_ref_clk; - -/* AHCI module Initialization, if return 0, initialization is successful. */ -static int imx_sata_init(struct device *dev, void __iomem *addr) -{ - u32 tmpdata; - int ret = 0; - struct clk *clk; - - sata_clk = clk_get(dev, "ahci"); - if (IS_ERR(sata_clk)) { - dev_err(dev, "no sata clock.\n"); - return PTR_ERR(sata_clk); - } - ret = clk_prepare_enable(sata_clk); - if (ret) { - dev_err(dev, "can't prepare/enable sata clock.\n"); - goto put_sata_clk; - } - - /* Get the AHCI SATA PHY CLK */ - sata_ref_clk = clk_get(dev, "ahci_phy"); - if (IS_ERR(sata_ref_clk)) { - dev_err(dev, "no sata ref clock.\n"); - ret = PTR_ERR(sata_ref_clk); - goto release_sata_clk; - } - ret = clk_prepare_enable(sata_ref_clk); - if (ret) { - dev_err(dev, "can't prepare/enable sata ref clock.\n"); - goto put_sata_ref_clk; - } - - /* Get the AHB clock rate, and configure the TIMER1MS reg later */ - clk = clk_get(dev, "ahci_dma"); - if (IS_ERR(clk)) { - dev_err(dev, "no dma clock.\n"); - ret = PTR_ERR(clk); - goto release_sata_ref_clk; - } - tmpdata = clk_get_rate(clk) / 1000; - clk_put(clk); - - writel(tmpdata, addr + HOST_TIMER1MS); - - tmpdata = readl(addr + HOST_CAP); - if (!(tmpdata & HOST_CAP_SSS)) { - tmpdata |= HOST_CAP_SSS; - writel(tmpdata, addr + HOST_CAP); - } - - if (!(readl(addr + HOST_PORTS_IMPL) & 0x1)) - writel((readl(addr + HOST_PORTS_IMPL) | 0x1), - addr + HOST_PORTS_IMPL); - - return 0; - -release_sata_ref_clk: - clk_disable_unprepare(sata_ref_clk); -put_sata_ref_clk: - clk_put(sata_ref_clk); -release_sata_clk: - clk_disable_unprepare(sata_clk); -put_sata_clk: - clk_put(sata_clk); - - return ret; -} - -static void imx_sata_exit(struct device *dev) -{ - clk_disable_unprepare(sata_ref_clk); - clk_put(sata_ref_clk); - - clk_disable_unprepare(sata_clk); - clk_put(sata_clk); - -} -struct platform_device *__init imx_add_ahci_imx( - const struct imx_ahci_imx_data *data, - const struct ahci_platform_data *pdata) -{ - struct resource res[] = { - { - .start = data->iobase, - .end = data->iobase + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = data->irq, - .end = data->irq, - .flags = IORESOURCE_IRQ, - }, - }; - - return imx_add_platform_device_dmamask(data->devid, 0, - res, ARRAY_SIZE(res), - pdata, sizeof(*pdata), DMA_BIT_MASK(32)); -} - -struct platform_device *__init imx53_add_ahci_imx(void) -{ - struct ahci_platform_data pdata = { - .init = imx_sata_init, - .exit = imx_sata_exit, - }; - - return imx_add_ahci_imx(&imx53_ahci_imx_data, &pdata); -} diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c index b4c70028d359..b2f08bfbbdd3 100644 --- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c @@ -46,7 +46,7 @@ static const int eukrea_mbimx27_pins[] __initconst = { PE10_PF_UART3_CTS, PE11_PF_UART3_RTS, /* UART4 */ -#if !defined(MACH_EUKREA_CPUIMX27_USEUART4) +#if !defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4) PB26_AF_UART4_RTS, PB28_AF_UART4_TXD, PB29_AF_UART4_CTS, @@ -306,7 +306,7 @@ void __init eukrea_mbimx27_baseboard_init(void) imx27_add_imx_uart1(&uart_pdata); imx27_add_imx_uart2(&uart_pdata); -#if !defined(MACH_EUKREA_CPUIMX27_USEUART4) +#if !defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4) imx27_add_imx_uart3(&uart_pdata); #endif diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c index a96ccc7f5012..44a65e9ff1fc 100644 --- a/arch/arm/mach-imx/gpc.c +++ b/arch/arm/mach-imx/gpc.c @@ -1,5 +1,5 @@ /* - * Copyright 2011 Freescale Semiconductor, Inc. + * Copyright 2011-2013 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. * * The code contained herein is licensed under the GNU General Public @@ -16,6 +16,7 @@ #include <linux/of_address.h> #include <linux/of_irq.h> #include <linux/irqchip/arm-gic.h> +#include "common.h" #define GPC_IMR1 0x008 #define GPC_PGC_CPU_PDN 0x2a0 @@ -68,6 +69,27 @@ static int imx_gpc_irq_set_wake(struct irq_data *d, unsigned int on) return 0; } +void imx_gpc_mask_all(void) +{ + void __iomem *reg_imr1 = gpc_base + GPC_IMR1; + int i; + + for (i = 0; i < IMR_NUM; i++) { + gpc_saved_imrs[i] = readl_relaxed(reg_imr1 + i * 4); + writel_relaxed(~0, reg_imr1 + i * 4); + } + +} + +void imx_gpc_restore_all(void) +{ + void __iomem *reg_imr1 = gpc_base + GPC_IMR1; + int i; + + for (i = 0; i < IMR_NUM; i++) + writel_relaxed(gpc_saved_imrs[i], reg_imr1 + i * 4); +} + static void imx_gpc_irq_unmask(struct irq_data *d) { void __iomem *reg; diff --git a/arch/arm/mach-imx/hardware.h b/arch/arm/mach-imx/hardware.h index 911e9b31b03f..356131f7b591 100644 --- a/arch/arm/mach-imx/hardware.h +++ b/arch/arm/mach-imx/hardware.h @@ -102,7 +102,6 @@ #include "mxc.h" -#include "mx6q.h" #include "mx51.h" #include "mx53.h" #include "mx3x.h" diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c index 361a253e2b63..5e91112dcbee 100644 --- a/arch/arm/mach-imx/hotplug.c +++ b/arch/arm/mach-imx/hotplug.c @@ -11,7 +11,6 @@ */ #include <linux/errno.h> -#include <asm/cacheflush.h> #include <asm/cp15.h> #include "common.h" @@ -20,7 +19,6 @@ static inline void cpu_enter_lowpower(void) { unsigned int v; - flush_cache_all(); asm volatile( "mcr p15, 0, %1, c7, c5, 0\n" " mcr p15, 0, %1, c7, c10, 4\n" diff --git a/arch/arm/mach-imx/imx27-dt.c b/arch/arm/mach-imx/imx27-dt.c index c915a490a11c..4aaead0a77ff 100644 --- a/arch/arm/mach-imx/imx27-dt.c +++ b/arch/arm/mach-imx/imx27-dt.c @@ -18,25 +18,13 @@ #include "common.h" #include "mx27.h" -static const struct of_dev_auxdata imx27_auxdata_lookup[] __initconst = { - OF_DEV_AUXDATA("fsl,imx27-uart", MX27_UART1_BASE_ADDR, "imx21-uart.0", NULL), - OF_DEV_AUXDATA("fsl,imx27-uart", MX27_UART2_BASE_ADDR, "imx21-uart.1", NULL), - OF_DEV_AUXDATA("fsl,imx27-uart", MX27_UART3_BASE_ADDR, "imx21-uart.2", NULL), - OF_DEV_AUXDATA("fsl,imx27-fec", MX27_FEC_BASE_ADDR, "imx27-fec.0", NULL), - OF_DEV_AUXDATA("fsl,imx27-i2c", MX27_I2C1_BASE_ADDR, "imx21-i2c.0", NULL), - OF_DEV_AUXDATA("fsl,imx27-i2c", MX27_I2C2_BASE_ADDR, "imx21-i2c.1", NULL), - OF_DEV_AUXDATA("fsl,imx27-cspi", MX27_CSPI1_BASE_ADDR, "imx27-cspi.0", NULL), - OF_DEV_AUXDATA("fsl,imx27-cspi", MX27_CSPI2_BASE_ADDR, "imx27-cspi.1", NULL), - OF_DEV_AUXDATA("fsl,imx27-cspi", MX27_CSPI3_BASE_ADDR, "imx27-cspi.2", NULL), - OF_DEV_AUXDATA("fsl,imx27-wdt", MX27_WDOG_BASE_ADDR, "imx2-wdt.0", NULL), - OF_DEV_AUXDATA("fsl,imx27-nand", MX27_NFC_BASE_ADDR, "imx27-nand.0", NULL), - { /* sentinel */ } -}; - static void __init imx27_dt_init(void) { - of_platform_populate(NULL, of_default_bus_match_table, - imx27_auxdata_lookup, NULL); + struct platform_device_info devinfo = { .name = "cpufreq-cpu0", }; + + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); + + platform_device_register_full(&devinfo); } static const char * const imx27_dt_board_compat[] __initconst = { diff --git a/arch/arm/mach-imx/imx51-dt.c b/arch/arm/mach-imx/imx51-dt.c index e2926a8863f8..ab24cc322111 100644 --- a/arch/arm/mach-imx/imx51-dt.c +++ b/arch/arm/mach-imx/imx51-dt.c @@ -21,7 +21,10 @@ static void __init imx51_dt_init(void) { + struct platform_device_info devinfo = { .name = "cpufreq-cpu0", }; + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); + platform_device_register_full(&devinfo); } static const char *imx51_dt_board_compat[] __initdata = { diff --git a/arch/arm/mach-imx/iomux-imx31.c b/arch/arm/mach-imx/iomux-imx31.c index cabefbc5e7c1..7c66805d2cc0 100644 --- a/arch/arm/mach-imx/iomux-imx31.c +++ b/arch/arm/mach-imx/iomux-imx31.c @@ -40,7 +40,7 @@ static DEFINE_SPINLOCK(gpio_mux_lock); #define IOMUX_REG_MASK (IOMUX_PADNUM_MASK & ~0x3) -unsigned long mxc_pin_alloc_map[NB_PORTS * 32 / BITS_PER_LONG]; +static unsigned long mxc_pin_alloc_map[NB_PORTS * 32 / BITS_PER_LONG]; /* * set the mode for a IOMUX pin. */ diff --git a/arch/arm/mach-imx/irq-common.c b/arch/arm/mach-imx/irq-common.c index b6e11458e5ae..4b34f52dc46b 100644 --- a/arch/arm/mach-imx/irq-common.c +++ b/arch/arm/mach-imx/irq-common.c @@ -21,25 +21,6 @@ #include "irq-common.h" -int imx_irq_set_priority(unsigned char irq, unsigned char prio) -{ - struct irq_chip_generic *gc; - struct mxc_extra_irq *exirq; - int ret; - - ret = -ENOSYS; - - gc = irq_get_chip_data(irq); - if (gc && gc->private) { - exirq = gc->private; - if (exirq->set_priority) - ret = exirq->set_priority(irq, prio); - } - - return ret; -} -EXPORT_SYMBOL(imx_irq_set_priority); - int mxc_set_irq_fiq(unsigned int irq, unsigned int type) { struct irq_chip_generic *gc; diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c index 146559311bd2..ea50870bda80 100644 --- a/arch/arm/mach-imx/mach-cpuimx27.c +++ b/arch/arm/mach-imx/mach-cpuimx27.c @@ -48,7 +48,7 @@ static const int eukrea_cpuimx27_pins[] __initconst = { PE14_PF_UART1_CTS, PE15_PF_UART1_RTS, /* UART4 */ -#if defined(MACH_EUKREA_CPUIMX27_USEUART4) +#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4) PB26_AF_UART4_RTS, PB28_AF_UART4_TXD, PB29_AF_UART4_CTS, @@ -272,7 +272,7 @@ static void __init eukrea_cpuimx27_init(void) /* SDHC2 can be used for Wifi */ imx27_add_mxc_mmc(1, NULL); #endif -#if defined(MACH_EUKREA_CPUIMX27_USEUART4) +#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4) /* in which case UART4 is also used for Bluetooth */ imx27_add_imx_uart3(&uart_pdata); #endif diff --git a/arch/arm/mach-imx/mach-cpuimx51sd.c b/arch/arm/mach-imx/mach-cpuimx51sd.c index 9b7393234f6f..9b5ddf5bbd33 100644 --- a/arch/arm/mach-imx/mach-cpuimx51sd.c +++ b/arch/arm/mach-imx/mach-cpuimx51sd.c @@ -33,7 +33,6 @@ #include "common.h" #include "devices-imx51.h" -#include "cpu_op-mx51.h" #include "eukrea-baseboards.h" #include "hardware.h" #include "iomux-mx51.h" @@ -285,10 +284,6 @@ static void __init eukrea_cpuimx51sd_init(void) mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51sd_pads, ARRAY_SIZE(eukrea_cpuimx51sd_pads)); -#if defined(CONFIG_CPU_FREQ_IMX) - get_cpu_op = mx51_get_cpu_op; -#endif - imx51_add_imx_uart(0, &uart_pdata); imx51_add_mxc_nand(&eukrea_cpuimx51sd_nand_board_info); imx51_add_imx2_wdt(0); diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 9ffd103b27e4..5536fd81379a 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -1,5 +1,5 @@ /* - * Copyright 2011 Freescale Semiconductor, Inc. + * Copyright 2011-2013 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. * * The code contained herein is licensed under the GNU General Public @@ -12,6 +12,7 @@ #include <linux/clk.h> #include <linux/clkdev.h> +#include <linux/clocksource.h> #include <linux/cpu.h> #include <linux/delay.h> #include <linux/export.h> @@ -28,52 +29,44 @@ #include <linux/regmap.h> #include <linux/micrel_phy.h> #include <linux/mfd/syscon.h> -#include <asm/smp_twd.h> #include <asm/hardware/cache-l2x0.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <asm/mach/time.h> #include <asm/system_misc.h> #include "common.h" #include "cpuidle.h" #include "hardware.h" -#define IMX6Q_ANALOG_DIGPROG 0x260 +static u32 chip_revision; -static int imx6q_revision(void) +int imx6q_revision(void) { - struct device_node *np; - void __iomem *base; - static u32 rev; - - if (!rev) { - np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop"); - if (!np) - return IMX_CHIP_REVISION_UNKNOWN; - base = of_iomap(np, 0); - if (!base) { - of_node_put(np); - return IMX_CHIP_REVISION_UNKNOWN; - } - rev = readl_relaxed(base + IMX6Q_ANALOG_DIGPROG); - iounmap(base); - of_node_put(np); - } + return chip_revision; +} + +static void __init imx6q_init_revision(void) +{ + u32 rev = imx_anatop_get_digprog(); switch (rev & 0xff) { case 0: - return IMX_CHIP_REVISION_1_0; + chip_revision = IMX_CHIP_REVISION_1_0; + break; case 1: - return IMX_CHIP_REVISION_1_1; + chip_revision = IMX_CHIP_REVISION_1_1; + break; case 2: - return IMX_CHIP_REVISION_1_2; + chip_revision = IMX_CHIP_REVISION_1_2; + break; default: - return IMX_CHIP_REVISION_UNKNOWN; + chip_revision = IMX_CHIP_REVISION_UNKNOWN; } + + mxc_set_cpu_type(rev >> 16 & 0xff); } -void imx6q_restart(char mode, const char *cmd) +static void imx6q_restart(char mode, const char *cmd) { struct device_node *np; void __iomem *wdog_base; @@ -165,29 +158,7 @@ static void __init imx6q_1588_init(void) } static void __init imx6q_usb_init(void) { - struct regmap *anatop; - -#define HW_ANADIG_USB1_CHRG_DETECT 0x000001b0 -#define HW_ANADIG_USB2_CHRG_DETECT 0x00000210 - -#define BM_ANADIG_USB_CHRG_DETECT_EN_B 0x00100000 -#define BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B 0x00080000 - - anatop = syscon_regmap_lookup_by_compatible("fsl,imx6q-anatop"); - if (!IS_ERR(anatop)) { - /* - * The external charger detector needs to be disabled, - * or the signal at DP will be poor - */ - regmap_write(anatop, HW_ANADIG_USB1_CHRG_DETECT, - BM_ANADIG_USB_CHRG_DETECT_EN_B - | BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B); - regmap_write(anatop, HW_ANADIG_USB2_CHRG_DETECT, - BM_ANADIG_USB_CHRG_DETECT_EN_B | - BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B); - } else { - pr_warn("failed to find fsl,imx6q-anatop regmap\n"); - } + imx_anatop_usb_chrg_detect_disable(); } static void __init imx6q_init_machine(void) @@ -197,6 +168,7 @@ static void __init imx6q_init_machine(void) of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); + imx_anatop_init(); imx6q_pm_init(); imx6q_usb_init(); imx6q_1588_init(); @@ -256,7 +228,7 @@ put_node: of_node_put(np); } -struct platform_device imx6q_cpufreq_pdev = { +static struct platform_device imx6q_cpufreq_pdev = { .name = "imx6q-cpufreq", }; @@ -283,6 +255,7 @@ static void __init imx6q_map_io(void) static void __init imx6q_init_irq(void) { + imx6q_init_revision(); l2x0_of_init(0, ~0UL); imx_src_init(); imx_gpc_init(); @@ -292,16 +265,18 @@ static void __init imx6q_init_irq(void) static void __init imx6q_timer_init(void) { mx6q_clocks_init(); - twd_local_timer_of_register(); - imx_print_silicon_rev("i.MX6Q", imx6q_revision()); + clocksource_of_init(); + imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q", + imx6q_revision()); } static const char *imx6q_dt_compat[] __initdata = { + "fsl,imx6dl", "fsl,imx6q", NULL, }; -DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad (Device Tree)") +DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad/DualLite (Device Tree)") .smp = smp_ops(imx_smp_ops), .map_io = imx6q_map_io, .init_irq = imx6q_init_irq, diff --git a/arch/arm/mach-imx/mach-mx51_babbage.c b/arch/arm/mach-imx/mach-mx51_babbage.c index 6c4d7feb4520..f3d264a636fa 100644 --- a/arch/arm/mach-imx/mach-mx51_babbage.c +++ b/arch/arm/mach-imx/mach-mx51_babbage.c @@ -27,7 +27,6 @@ #include "common.h" #include "devices-imx51.h" -#include "cpu_op-mx51.h" #include "hardware.h" #include "iomux-mx51.h" @@ -371,9 +370,6 @@ static void __init mx51_babbage_init(void) imx51_soc_init(); -#if defined(CONFIG_CPU_FREQ_IMX) - get_cpu_op = mx51_get_cpu_op; -#endif imx51_babbage_common_init(); imx51_add_imx_uart(0, &uart_pdata); diff --git a/arch/arm/mach-imx/mm-imx1.c b/arch/arm/mach-imx/mm-imx1.c index 7a146671e65a..3c609c52d3eb 100644 --- a/arch/arm/mach-imx/mm-imx1.c +++ b/arch/arm/mach-imx/mm-imx1.c @@ -51,6 +51,8 @@ void __init mx1_init_irq(void) void __init imx1_soc_init(void) { + mxc_device_init(); + mxc_register_gpio("imx1-gpio", 0, MX1_GPIO1_BASE_ADDR, SZ_256, MX1_GPIO_INT_PORTA, 0); mxc_register_gpio("imx1-gpio", 1, MX1_GPIO2_BASE_ADDR, SZ_256, diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c index cefa047c4053..e0e69a682174 100644 --- a/arch/arm/mach-imx/mm-imx3.c +++ b/arch/arm/mach-imx/mm-imx3.c @@ -82,7 +82,7 @@ static void __iomem *imx3_ioremap_caller(unsigned long phys_addr, size_t size, return __arm_ioremap_caller(phys_addr, size, mtype, caller); } -void __init imx3_init_l2x0(void) +static void __init imx3_init_l2x0(void) { #ifdef CONFIG_CACHE_L2X0 void __iomem *l2x0_base; diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c index cf34994cfe28..b7c4e70e5081 100644 --- a/arch/arm/mach-imx/mm-imx5.c +++ b/arch/arm/mach-imx/mm-imx5.c @@ -84,6 +84,7 @@ void __init imx51_init_early(void) mxc_set_cpu_type(MXC_CPU_MX51); mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR)); mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR)); + imx_src_init(); } void __init imx53_init_early(void) @@ -91,6 +92,7 @@ void __init imx53_init_early(void) mxc_set_cpu_type(MXC_CPU_MX53); mxc_iomux_v3_init(MX53_IO_ADDRESS(MX53_IOMUXC_BASE_ADDR)); mxc_arch_reset_init(MX53_IO_ADDRESS(MX53_WDOG1_BASE_ADDR)); + imx_src_init(); } void __init mx51_init_irq(void) diff --git a/arch/arm/mach-imx/mx6q.h b/arch/arm/mach-imx/mx6q.h deleted file mode 100644 index 19d3f54db5af..000000000000 --- a/arch/arm/mach-imx/mx6q.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2011 Linaro Ltd. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -#ifndef __MACH_MX6Q_H__ -#define __MACH_MX6Q_H__ - -#define MX6Q_IO_P2V(x) IMX_IO_P2V(x) -#define MX6Q_IO_ADDRESS(x) IOMEM(MX6Q_IO_P2V(x)) - -/* - * The following are the blocks that need to be statically mapped. - * For other blocks, the base address really should be retrieved from - * device tree. - */ -#define MX6Q_SCU_BASE_ADDR 0x00a00000 -#define MX6Q_SCU_SIZE 0x1000 -#define MX6Q_CCM_BASE_ADDR 0x020c4000 -#define MX6Q_CCM_SIZE 0x4000 -#define MX6Q_ANATOP_BASE_ADDR 0x020c8000 -#define MX6Q_ANATOP_SIZE 0x1000 - -#endif /* __MACH_MX6Q_H__ */ diff --git a/arch/arm/mach-imx/mxc.h b/arch/arm/mach-imx/mxc.h index 7dce17a9fe6c..8629e5be7ecd 100644 --- a/arch/arm/mach-imx/mxc.h +++ b/arch/arm/mach-imx/mxc.h @@ -34,6 +34,8 @@ #define MXC_CPU_MX35 35 #define MXC_CPU_MX51 51 #define MXC_CPU_MX53 53 +#define MXC_CPU_IMX6DL 0x61 +#define MXC_CPU_IMX6Q 0x63 #define IMX_CHIP_REVISION_1_0 0x10 #define IMX_CHIP_REVISION_1_1 0x11 @@ -150,6 +152,15 @@ extern unsigned int __mxc_cpu_type; #endif #ifndef __ASSEMBLY__ +static inline bool cpu_is_imx6dl(void) +{ + return __mxc_cpu_type == MXC_CPU_IMX6DL; +} + +static inline bool cpu_is_imx6q(void) +{ + return __mxc_cpu_type == MXC_CPU_IMX6Q; +} struct cpu_op { u32 cpu_rate; diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c index 7c0b03f67b05..4a69305db65e 100644 --- a/arch/arm/mach-imx/platsmp.c +++ b/arch/arm/mach-imx/platsmp.c @@ -12,7 +12,6 @@ #include <linux/init.h> #include <linux/smp.h> -#include <linux/irqchip/arm-gic.h> #include <asm/page.h> #include <asm/smp_scu.h> #include <asm/mach/map.h> @@ -52,16 +51,6 @@ void imx_scu_standby_enable(void) writel_relaxed(val, scu_base); } -static void __cpuinit imx_secondary_init(unsigned int cpu) -{ - /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); -} - static int __cpuinit imx_boot_secondary(unsigned int cpu, struct task_struct *idle) { imx_set_cpu_jump(cpu, v7_secondary_startup); @@ -79,8 +68,8 @@ static void __init imx_smp_init_cpus(void) ncores = scu_get_core_count(scu_base); - for (i = 0; i < ncores; i++) - set_cpu_possible(i, true); + for (i = ncores; i < NR_CPUS; i++) + set_cpu_possible(i, false); } void imx_smp_prepare(void) @@ -96,7 +85,6 @@ static void __init imx_smp_prepare_cpus(unsigned int max_cpus) struct smp_operations imx_smp_ops __initdata = { .smp_init_cpus = imx_smp_init_cpus, .smp_prepare_cpus = imx_smp_prepare_cpus, - .smp_secondary_init = imx_secondary_init, .smp_boot_secondary = imx_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_die = imx_cpu_die, diff --git a/arch/arm/mach-imx/pm-imx5.c b/arch/arm/mach-imx/pm-imx5.c index f67fd7ee8127..82e79c658eb2 100644 --- a/arch/arm/mach-imx/pm-imx5.c +++ b/arch/arm/mach-imx/pm-imx5.c @@ -149,33 +149,6 @@ static void imx5_pm_idle(void) imx5_cpu_do_idle(); } -static int imx5_cpuidle_enter(struct cpuidle_device *dev, - struct cpuidle_driver *drv, int idx) -{ - int ret; - - ret = imx5_cpu_do_idle(); - if (ret < 0) - return ret; - - return idx; -} - -static struct cpuidle_driver imx5_cpuidle_driver = { - .name = "imx5_cpuidle", - .owner = THIS_MODULE, - .en_core_tk_irqen = 1, - .states[0] = { - .enter = imx5_cpuidle_enter, - .exit_latency = 2, - .target_residency = 1, - .flags = CPUIDLE_FLAG_TIME_VALID, - .name = "IMX5 SRPG", - .desc = "CPU state retained,powered off", - }, - .state_count = 1, -}; - static int __init imx5_pm_common_init(void) { int ret; @@ -193,8 +166,7 @@ static int __init imx5_pm_common_init(void) /* Set the registers to the default cpu idle state. */ mx5_cpu_lp_set(IMX5_DEFAULT_CPU_IDLE_STATE); - imx_cpuidle_init(&imx5_cpuidle_driver); - return 0; + return imx5_cpuidle_init(); } void __init imx51_pm_init(void) diff --git a/arch/arm/mach-imx/pm-imx6q.c b/arch/arm/mach-imx/pm-imx6q.c index 5faba7a3c95f..204942749e21 100644 --- a/arch/arm/mach-imx/pm-imx6q.c +++ b/arch/arm/mach-imx/pm-imx6q.c @@ -1,5 +1,5 @@ /* - * Copyright 2011 Freescale Semiconductor, Inc. + * Copyright 2011-2013 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. * * The code contained herein is licensed under the GNU General Public @@ -34,10 +34,12 @@ static int imx6q_pm_enter(suspend_state_t state) case PM_SUSPEND_MEM: imx6q_set_lpm(STOP_POWER_OFF); imx_gpc_pre_suspend(); + imx_anatop_pre_suspend(); imx_set_cpu_jump(0, v7_cpu_resume); /* Zzz ... */ cpu_suspend(0, imx6q_suspend_finish); imx_smp_prepare(); + imx_anatop_post_resume(); imx_gpc_post_resume(); imx6q_set_lpm(WAIT_CLOCKED); break; diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c index 09a742f8c7ab..10a6b1a8c5ac 100644 --- a/arch/arm/mach-imx/src.c +++ b/arch/arm/mach-imx/src.c @@ -14,16 +14,73 @@ #include <linux/io.h> #include <linux/of.h> #include <linux/of_address.h> +#include <linux/reset-controller.h> #include <linux/smp.h> #include <asm/smp_plat.h> +#include "common.h" #define SRC_SCR 0x000 #define SRC_GPR1 0x020 #define BP_SRC_SCR_WARM_RESET_ENABLE 0 +#define BP_SRC_SCR_SW_GPU_RST 1 +#define BP_SRC_SCR_SW_VPU_RST 2 +#define BP_SRC_SCR_SW_IPU1_RST 3 +#define BP_SRC_SCR_SW_OPEN_VG_RST 4 +#define BP_SRC_SCR_SW_IPU2_RST 12 #define BP_SRC_SCR_CORE1_RST 14 #define BP_SRC_SCR_CORE1_ENABLE 22 static void __iomem *src_base; +static DEFINE_SPINLOCK(scr_lock); + +static const int sw_reset_bits[5] = { + BP_SRC_SCR_SW_GPU_RST, + BP_SRC_SCR_SW_VPU_RST, + BP_SRC_SCR_SW_IPU1_RST, + BP_SRC_SCR_SW_OPEN_VG_RST, + BP_SRC_SCR_SW_IPU2_RST +}; + +static int imx_src_reset_module(struct reset_controller_dev *rcdev, + unsigned long sw_reset_idx) +{ + unsigned long timeout; + unsigned long flags; + int bit; + u32 val; + + if (!src_base) + return -ENODEV; + + if (sw_reset_idx >= ARRAY_SIZE(sw_reset_bits)) + return -EINVAL; + + bit = 1 << sw_reset_bits[sw_reset_idx]; + + spin_lock_irqsave(&scr_lock, flags); + val = readl_relaxed(src_base + SRC_SCR); + val |= bit; + writel_relaxed(val, src_base + SRC_SCR); + spin_unlock_irqrestore(&scr_lock, flags); + + timeout = jiffies + msecs_to_jiffies(1000); + while (readl(src_base + SRC_SCR) & bit) { + if (time_after(jiffies, timeout)) + return -ETIME; + cpu_relax(); + } + + return 0; +} + +static struct reset_control_ops imx_src_ops = { + .reset = imx_src_reset_module, +}; + +static struct reset_controller_dev imx_reset_controller = { + .ops = &imx_src_ops, + .nr_resets = ARRAY_SIZE(sw_reset_bits), +}; void imx_enable_cpu(int cpu, bool enable) { @@ -31,9 +88,11 @@ void imx_enable_cpu(int cpu, bool enable) cpu = cpu_logical_map(cpu); mask = 1 << (BP_SRC_SCR_CORE1_ENABLE + cpu - 1); + spin_lock(&scr_lock); val = readl_relaxed(src_base + SRC_SCR); val = enable ? val | mask : val & ~mask; writel_relaxed(val, src_base + SRC_SCR); + spin_unlock(&scr_lock); } void imx_set_cpu_jump(int cpu, void *jump_addr) @@ -60,9 +119,11 @@ void imx_src_prepare_restart(void) u32 val; /* clear enable bits of secondary cores */ + spin_lock(&scr_lock); val = readl_relaxed(src_base + SRC_SCR); val &= ~(0x7 << BP_SRC_SCR_CORE1_ENABLE); writel_relaxed(val, src_base + SRC_SCR); + spin_unlock(&scr_lock); /* clear persistent entry register of primary core */ writel_relaxed(0, src_base + SRC_GPR1); @@ -73,15 +134,23 @@ void __init imx_src_init(void) struct device_node *np; u32 val; - np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-src"); + np = of_find_compatible_node(NULL, NULL, "fsl,imx51-src"); + if (!np) + return; src_base = of_iomap(np, 0); WARN_ON(!src_base); + imx_reset_controller.of_node = np; + if (IS_ENABLED(CONFIG_RESET_CONTROLLER)) + reset_controller_register(&imx_reset_controller); + /* * force warm reset sources to generate cold reset * for a more reliable restart */ + spin_lock(&scr_lock); val = readl_relaxed(src_base + SRC_SCR); val &= ~(1 << BP_SRC_SCR_WARM_RESET_ENABLE); writel_relaxed(val, src_base + SRC_SCR); + spin_unlock(&scr_lock); } diff --git a/arch/arm/mach-imx/tzic.c b/arch/arm/mach-imx/tzic.c index 9721161f208f..8183178d5aa3 100644 --- a/arch/arm/mach-imx/tzic.c +++ b/arch/arm/mach-imx/tzic.c @@ -49,7 +49,7 @@ #define TZIC_SWINT 0x0F00 /* Software Interrupt Rigger Register */ #define TZIC_ID0 0x0FD0 /* Indentification Register 0 */ -void __iomem *tzic_base; /* Used as irq controller base in entry-macro.S */ +static void __iomem *tzic_base; static struct irq_domain *domain; #define TZIC_NUM_IRQS 128 diff --git a/arch/arm/mach-integrator/Makefile b/arch/arm/mach-integrator/Makefile index 5521d18bf19a..d14d6b76f4c2 100644 --- a/arch/arm/mach-integrator/Makefile +++ b/arch/arm/mach-integrator/Makefile @@ -9,5 +9,4 @@ obj-$(CONFIG_ARCH_INTEGRATOR_AP) += integrator_ap.o obj-$(CONFIG_ARCH_INTEGRATOR_CP) += integrator_cp.o obj-$(CONFIG_PCI) += pci_v3.o pci.o -obj-$(CONFIG_CPU_FREQ_INTEGRATOR) += cpu.o obj-$(CONFIG_INTEGRATOR_IMPD1) += impd1.o diff --git a/arch/arm/mach-integrator/cpu.c b/arch/arm/mach-integrator/cpu.c deleted file mode 100644 index 590c192cdf4d..000000000000 --- a/arch/arm/mach-integrator/cpu.c +++ /dev/null @@ -1,224 +0,0 @@ -/* - * linux/arch/arm/mach-integrator/cpu.c - * - * Copyright (C) 2001-2002 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * CPU support functions - */ -#include <linux/module.h> -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/cpufreq.h> -#include <linux/sched.h> -#include <linux/smp.h> -#include <linux/init.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <mach/platform.h> -#include <asm/mach-types.h> -#include <asm/hardware/icst.h> - -static struct cpufreq_driver integrator_driver; - -#define CM_ID __io_address(INTEGRATOR_HDR_ID) -#define CM_OSC __io_address(INTEGRATOR_HDR_OSC) -#define CM_STAT __io_address(INTEGRATOR_HDR_STAT) -#define CM_LOCK __io_address(INTEGRATOR_HDR_LOCK) - -static const struct icst_params lclk_params = { - .ref = 24000000, - .vco_max = ICST525_VCO_MAX_5V, - .vco_min = ICST525_VCO_MIN, - .vd_min = 8, - .vd_max = 132, - .rd_min = 24, - .rd_max = 24, - .s2div = icst525_s2div, - .idx2s = icst525_idx2s, -}; - -static const struct icst_params cclk_params = { - .ref = 24000000, - .vco_max = ICST525_VCO_MAX_5V, - .vco_min = ICST525_VCO_MIN, - .vd_min = 12, - .vd_max = 160, - .rd_min = 24, - .rd_max = 24, - .s2div = icst525_s2div, - .idx2s = icst525_idx2s, -}; - -/* - * Validate the speed policy. - */ -static int integrator_verify_policy(struct cpufreq_policy *policy) -{ - struct icst_vco vco; - - cpufreq_verify_within_limits(policy, - policy->cpuinfo.min_freq, - policy->cpuinfo.max_freq); - - vco = icst_hz_to_vco(&cclk_params, policy->max * 1000); - policy->max = icst_hz(&cclk_params, vco) / 1000; - - vco = icst_hz_to_vco(&cclk_params, policy->min * 1000); - policy->min = icst_hz(&cclk_params, vco) / 1000; - - cpufreq_verify_within_limits(policy, - policy->cpuinfo.min_freq, - policy->cpuinfo.max_freq); - - return 0; -} - - -static int integrator_set_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - cpumask_t cpus_allowed; - int cpu = policy->cpu; - struct icst_vco vco; - struct cpufreq_freqs freqs; - u_int cm_osc; - - /* - * Save this threads cpus_allowed mask. - */ - cpus_allowed = current->cpus_allowed; - - /* - * Bind to the specified CPU. When this call returns, - * we should be running on the right CPU. - */ - set_cpus_allowed(current, cpumask_of_cpu(cpu)); - BUG_ON(cpu != smp_processor_id()); - - /* get current setting */ - cm_osc = __raw_readl(CM_OSC); - - if (machine_is_integrator()) { - vco.s = (cm_osc >> 8) & 7; - } else if (machine_is_cintegrator()) { - vco.s = 1; - } - vco.v = cm_osc & 255; - vco.r = 22; - freqs.old = icst_hz(&cclk_params, vco) / 1000; - - /* icst_hz_to_vco rounds down -- so we need the next - * larger freq in case of CPUFREQ_RELATION_L. - */ - if (relation == CPUFREQ_RELATION_L) - target_freq += 999; - if (target_freq > policy->max) - target_freq = policy->max; - vco = icst_hz_to_vco(&cclk_params, target_freq * 1000); - freqs.new = icst_hz(&cclk_params, vco) / 1000; - - freqs.cpu = policy->cpu; - - if (freqs.old == freqs.new) { - set_cpus_allowed(current, cpus_allowed); - return 0; - } - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - cm_osc = __raw_readl(CM_OSC); - - if (machine_is_integrator()) { - cm_osc &= 0xfffff800; - cm_osc |= vco.s << 8; - } else if (machine_is_cintegrator()) { - cm_osc &= 0xffffff00; - } - cm_osc |= vco.v; - - __raw_writel(0xa05f, CM_LOCK); - __raw_writel(cm_osc, CM_OSC); - __raw_writel(0, CM_LOCK); - - /* - * Restore the CPUs allowed mask. - */ - set_cpus_allowed(current, cpus_allowed); - - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - return 0; -} - -static unsigned int integrator_get(unsigned int cpu) -{ - cpumask_t cpus_allowed; - unsigned int current_freq; - u_int cm_osc; - struct icst_vco vco; - - cpus_allowed = current->cpus_allowed; - - set_cpus_allowed(current, cpumask_of_cpu(cpu)); - BUG_ON(cpu != smp_processor_id()); - - /* detect memory etc. */ - cm_osc = __raw_readl(CM_OSC); - - if (machine_is_integrator()) { - vco.s = (cm_osc >> 8) & 7; - } else { - vco.s = 1; - } - vco.v = cm_osc & 255; - vco.r = 22; - - current_freq = icst_hz(&cclk_params, vco) / 1000; /* current freq */ - - set_cpus_allowed(current, cpus_allowed); - - return current_freq; -} - -static int integrator_cpufreq_init(struct cpufreq_policy *policy) -{ - - /* set default policy and cpuinfo */ - policy->cpuinfo.max_freq = 160000; - policy->cpuinfo.min_freq = 12000; - policy->cpuinfo.transition_latency = 1000000; /* 1 ms, assumed */ - policy->cur = policy->min = policy->max = integrator_get(policy->cpu); - - return 0; -} - -static struct cpufreq_driver integrator_driver = { - .verify = integrator_verify_policy, - .target = integrator_set_target, - .get = integrator_get, - .init = integrator_cpufreq_init, - .name = "integrator", -}; - -static int __init integrator_cpu_init(void) -{ - return cpufreq_register_driver(&integrator_driver); -} - -static void __exit integrator_cpu_exit(void) -{ - cpufreq_unregister_driver(&integrator_driver); -} - -MODULE_AUTHOR ("Russell M. King"); -MODULE_DESCRIPTION ("cpufreq driver for ARM Integrator CPUs"); -MODULE_LICENSE ("GPL"); - -module_init(integrator_cpu_init); -module_exit(integrator_cpu_exit); diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index ea961445e0e9..b23c8e4f28e8 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -536,16 +536,14 @@ static void __init ap_init_of(void) 'A' + (ap_sc_id & 0x0f)); soc_dev = soc_device_register(soc_dev_attr); - if (IS_ERR_OR_NULL(soc_dev)) { + if (IS_ERR(soc_dev)) { kfree(soc_dev_attr->revision); kfree(soc_dev_attr); return; } parent = soc_device_to_device(soc_dev); - - if (!IS_ERR_OR_NULL(parent)) - integrator_init_sysfs(parent, ap_sc_id); + integrator_init_sysfs(parent, ap_sc_id); of_platform_populate(root, of_default_bus_match_table, ap_auxdata_lookup, parent); diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index 2b0db82a5381..8c60fcb08a98 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -250,39 +250,6 @@ static void __init intcp_init_early(void) } #ifdef CONFIG_OF - -static void __init cp_of_timer_init(void) -{ - struct device_node *node; - const char *path; - void __iomem *base; - int err; - int irq; - - err = of_property_read_string(of_aliases, - "arm,timer-primary", &path); - if (WARN_ON(err)) - return; - node = of_find_node_by_path(path); - base = of_iomap(node, 0); - if (WARN_ON(!base)) - return; - writel(0, base + TIMER_CTRL); - sp804_clocksource_init(base, node->name); - - err = of_property_read_string(of_aliases, - "arm,timer-secondary", &path); - if (WARN_ON(err)) - return; - node = of_find_node_by_path(path); - base = of_iomap(node, 0); - if (WARN_ON(!base)) - return; - irq = irq_of_parse_and_map(node, 0); - writel(0, base + TIMER_CTRL); - sp804_clockevents_init(base, irq, node->name); -} - static const struct of_device_id fpga_irq_of_match[] __initconst = { { .compatible = "arm,versatile-fpga-irq", .data = fpga_irq_of_init, }, { /* Sentinel */ } @@ -360,17 +327,14 @@ static void __init intcp_init_of(void) 'A' + (intcp_sc_id & 0x0f)); soc_dev = soc_device_register(soc_dev_attr); - if (IS_ERR_OR_NULL(soc_dev)) { + if (IS_ERR(soc_dev)) { kfree(soc_dev_attr->revision); kfree(soc_dev_attr); return; } parent = soc_device_to_device(soc_dev); - - if (!IS_ERR_OR_NULL(parent)) - integrator_init_sysfs(parent, intcp_sc_id); - + integrator_init_sysfs(parent, intcp_sc_id); of_platform_populate(root, of_default_bus_match_table, intcp_auxdata_lookup, parent); } @@ -386,7 +350,6 @@ DT_MACHINE_START(INTEGRATOR_CP_DT, "ARM Integrator/CP (Device Tree)") .init_early = intcp_init_early, .init_irq = intcp_init_irq_of, .handle_irq = fpga_handle_irq, - .init_time = cp_of_timer_init, .init_machine = intcp_init_of, .restart = integrator_restart, .dt_compat = intcp_dt_board_compat, diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index 1dbeb7c99d58..6600cff6bd92 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -29,6 +29,7 @@ #include <linux/io.h> #include <linux/export.h> #include <linux/gpio.h> +#include <linux/cpu.h> #include <mach/udc.h> #include <mach/hardware.h> @@ -239,7 +240,7 @@ void __init ixp4xx_init_irq(void) * ixp4xx does not implement the XScale PWRMODE register * so it must not call cpu_do_idle(). */ - disable_hlt(); + cpu_idle_poll_ctrl(true); /* Route all sources to IRQ instead of FIQ */ *IXP4XX_ICLR = 0x0; diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index 7b6a64bc5f40..7509a89af967 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -2,23 +2,41 @@ if ARCH_KIRKWOOD menu "Marvell Kirkwood Implementations" +config MACH_D2NET_V2 + bool "LaCie d2 Network v2 NAS Board" + help + Say 'Y' here if you want your kernel to support the + LaCie d2 Network v2 NAS. + config MACH_DB88F6281_BP bool "Marvell DB-88F6281-BP Development Board" help Say 'Y' here if you want your kernel to support the Marvell DB-88F6281-BP Development Board. -config MACH_RD88F6192_NAS - bool "Marvell RD-88F6192-NAS Reference Board" +config MACH_DOCKSTAR + bool "Seagate FreeAgent DockStar" help Say 'Y' here if you want your kernel to support the - Marvell RD-88F6192-NAS Reference Board. + Seagate FreeAgent DockStar. -config MACH_RD88F6281 - bool "Marvell RD-88F6281 Reference Board" +config MACH_ESATA_SHEEVAPLUG + bool "Marvell eSATA SheevaPlug Reference Board" help Say 'Y' here if you want your kernel to support the - Marvell RD-88F6281 Reference Board. + Marvell eSATA SheevaPlug Reference Board. + +config MACH_GURUPLUG + bool "Marvell GuruPlug Reference Board" + help + Say 'Y' here if you want your kernel to support the + Marvell GuruPlug Reference Board. + +config MACH_INETSPACE_V2 + bool "LaCie Internet Space v2 NAS Board" + help + Say 'Y' here if you want your kernel to support the + LaCie Internet Space v2 NAS. config MACH_MV88F6281GTW_GE bool "Marvell 88F6281 GTW GE Board" @@ -26,23 +44,93 @@ config MACH_MV88F6281GTW_GE Say 'Y' here if you want your kernel to support the Marvell 88F6281 GTW GE Board. +config MACH_NET2BIG_V2 + bool "LaCie 2Big Network v2 NAS Board" + help + Say 'Y' here if you want your kernel to support the + LaCie 2Big Network v2 NAS. + +config MACH_NET5BIG_V2 + bool "LaCie 5Big Network v2 NAS Board" + help + Say 'Y' here if you want your kernel to support the + LaCie 5Big Network v2 NAS. + +config MACH_NETSPACE_MAX_V2 + bool "LaCie Network Space Max v2 NAS Board" + help + Say 'Y' here if you want your kernel to support the + LaCie Network Space Max v2 NAS. + +config MACH_NETSPACE_V2 + bool "LaCie Network Space v2 NAS Board" + help + Say 'Y' here if you want your kernel to support the + LaCie Network Space v2 NAS. + +config MACH_OPENRD + bool + +config MACH_OPENRD_BASE + bool "Marvell OpenRD Base Board" + select MACH_OPENRD + help + Say 'Y' here if you want your kernel to support the + Marvell OpenRD Base Board. + +config MACH_OPENRD_CLIENT + bool "Marvell OpenRD Client Board" + select MACH_OPENRD + help + Say 'Y' here if you want your kernel to support the + Marvell OpenRD Client Board. + +config MACH_OPENRD_ULTIMATE + bool "Marvell OpenRD Ultimate Board" + select MACH_OPENRD + help + Say 'Y' here if you want your kernel to support the + Marvell OpenRD Ultimate Board. + +config MACH_RD88F6192_NAS + bool "Marvell RD-88F6192-NAS Reference Board" + help + Say 'Y' here if you want your kernel to support the + Marvell RD-88F6192-NAS Reference Board. + +config MACH_RD88F6281 + bool "Marvell RD-88F6281 Reference Board" + help + Say 'Y' here if you want your kernel to support the + Marvell RD-88F6281 Reference Board. + config MACH_SHEEVAPLUG bool "Marvell SheevaPlug Reference Board" help Say 'Y' here if you want your kernel to support the Marvell SheevaPlug Reference Board. -config MACH_ESATA_SHEEVAPLUG - bool "Marvell eSATA SheevaPlug Reference Board" +config MACH_T5325 + bool "HP t5325 Thin Client" help Say 'Y' here if you want your kernel to support the - Marvell eSATA SheevaPlug Reference Board. + HP t5325 Thin Client. -config MACH_GURUPLUG - bool "Marvell GuruPlug Reference Board" +config MACH_TS219 + bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS" help Say 'Y' here if you want your kernel to support the - Marvell GuruPlug Reference Board. + QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and + TS-219P+ Turbo NAS devices. + +config MACH_TS41X + bool "QNAP TS-410, TS-410U, TS-419P, TS-419P+ and TS-419U Turbo NAS" + help + Say 'Y' here if you want your kernel to support the + QNAP TS-410, TS-410U, TS-419P, TS-419P+ and TS-419U Turbo + NAS devices. + +comment "Device tree entries" config ARCH_KIRKWOOD_DT bool "Marvell Kirkwood Flattened Device Tree" @@ -58,12 +146,27 @@ config ARCH_KIRKWOOD_DT Say 'Y' here if you want your kernel to support the Marvell Kirkwood using flattened device tree. -config MACH_GURUPLUG_DT - bool "Marvell GuruPlug Reference Board (Flattened Device Tree)" +config MACH_CLOUDBOX_DT + bool "LaCie CloudBox NAS (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the LaCie + CloudBox NAS, using Flattened Device Tree. + +config MACH_DLINK_KIRKWOOD_DT + bool "D-Link Kirkwood-based NAS (Flattened Device Tree)" select ARCH_KIRKWOOD_DT help Say 'Y' here if you want your kernel to support the - Marvell GuruPlug Reference Board (Flattened Device Tree). + Kirkwood-based D-Link NASes such as DNS-320 & DNS-325, + using Flattened Device Tree. + +config MACH_DOCKSTAR_DT + bool "Seagate FreeAgent Dockstar (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the + Seagate FreeAgent Dockstar (Flattened Device Tree). config MACH_DREAMPLUG_DT bool "Marvell DreamPlug (Flattened Device Tree)" @@ -72,19 +175,19 @@ config MACH_DREAMPLUG_DT Say 'Y' here if you want your kernel to support the Marvell DreamPlug (Flattened Device Tree). -config MACH_ICONNECT_DT - bool "Iomega Iconnect (Flattened Device Tree)" +config MACH_GOFLEXNET_DT + bool "Seagate GoFlex Net (Flattened Device Tree)" select ARCH_KIRKWOOD_DT help - Say 'Y' here to enable Iomega Iconnect support. + Say 'Y' here if you want your kernel to support the + Seagate GoFlex Net (Flattened Device Tree). -config MACH_DLINK_KIRKWOOD_DT - bool "D-Link Kirkwood-based NAS (Flattened Device Tree)" +config MACH_GURUPLUG_DT + bool "Marvell GuruPlug Reference Board (Flattened Device Tree)" select ARCH_KIRKWOOD_DT help Say 'Y' here if you want your kernel to support the - Kirkwood-based D-Link NASes such as DNS-320 & DNS-325, - using Flattened Device Tree. + Marvell GuruPlug Reference Board (Flattened Device Tree). config MACH_IB62X0_DT bool "RaidSonic IB-NAS6210, IB-NAS6220 (Flattened Device Tree)" @@ -94,41 +197,18 @@ config MACH_IB62X0_DT RaidSonic IB-NAS6210 & IB-NAS6220 devices, using Flattened Device Tree. -config MACH_TS219_DT - bool "Device Tree for QNAP TS-11X, TS-21X NAS" - select ARCH_KIRKWOOD_DT - select ARM_APPENDED_DTB - select ARM_ATAG_DTB_COMPAT - help - Say 'Y' here if you want your kernel to support the QNAP - TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and - TS-219P+ Turbo NAS devices using Fattened Device Tree. - There are two different Device Tree descriptions, depending - on if the device is based on an if the board uses the MV6281 - or MV6282. If you have the wrong one, the buttons will not - work. - -config MACH_DOCKSTAR_DT - bool "Seagate FreeAgent Dockstar (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the - Seagate FreeAgent Dockstar (Flattened Device Tree). - -config MACH_GOFLEXNET_DT - bool "Seagate GoFlex Net (Flattened Device Tree)" +config MACH_ICONNECT_DT + bool "Iomega Iconnect (Flattened Device Tree)" select ARCH_KIRKWOOD_DT help - Say 'Y' here if you want your kernel to support the - Seagate GoFlex Net (Flattened Device Tree). + Say 'Y' here to enable Iomega Iconnect support. -config MACH_LSXL_DT - bool "Buffalo Linkstation LS-XHL, LS-CHLv2 (Flattened Device Tree)" +config MACH_INETSPACE_V2_DT + bool "LaCie Internet Space v2 NAS (Flattened Device Tree)" select ARCH_KIRKWOOD_DT help - Say 'Y' here if you want your kernel to support the - Buffalo Linkstation LS-XHL & LS-CHLv2 devices, using - Flattened Device Tree. + Say 'Y' here if you want your kernel to support the LaCie + Internet Space v2 NAS, using Flattened Device Tree. config MACH_IOMEGA_IX2_200_DT bool "Iomega StorCenter ix2-200 (Flattened Device Tree)" @@ -144,12 +224,13 @@ config MACH_KM_KIRKWOOD_DT Say 'Y' here if you want your kernel to support the Keymile Kirkwood Reference Desgin, using Flattened Device Tree. -config MACH_INETSPACE_V2_DT - bool "LaCie Internet Space v2 NAS (Flattened Device Tree)" +config MACH_LSXL_DT + bool "Buffalo Linkstation LS-XHL, LS-CHLv2 (Flattened Device Tree)" select ARCH_KIRKWOOD_DT help - Say 'Y' here if you want your kernel to support the LaCie - Internet Space v2 NAS, using Flattened Device Tree. + Say 'Y' here if you want your kernel to support the + Buffalo Linkstation LS-XHL & LS-CHLv2 devices, using + Flattened Device Tree. config MACH_MPLCEC4_DT bool "MPL CEC4 (Flattened Device Tree)" @@ -158,12 +239,12 @@ config MACH_MPLCEC4_DT Say 'Y' here if you want your kernel to support the MPL CEC4 (Flattened Device Tree). -config MACH_NETSPACE_V2_DT - bool "LaCie Network Space v2 NAS (Flattened Device Tree)" +config MACH_NETSPACE_LITE_V2_DT + bool "LaCie Network Space Lite v2 NAS (Flattened Device Tree)" select ARCH_KIRKWOOD_DT help Say 'Y' here if you want your kernel to support the LaCie - Network Space v2 NAS, using Flattened Device Tree. + Network Space Lite v2 NAS, using Flattened Device Tree. config MACH_NETSPACE_MAX_V2_DT bool "LaCie Network Space Max v2 NAS (Flattened Device Tree)" @@ -172,128 +253,69 @@ config MACH_NETSPACE_MAX_V2_DT Say 'Y' here if you want your kernel to support the LaCie Network Space Max v2 NAS, using Flattened Device Tree. -config MACH_NETSPACE_LITE_V2_DT - bool "LaCie Network Space Lite v2 NAS (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the LaCie - Network Space Lite v2 NAS, using Flattened Device Tree. - config MACH_NETSPACE_MINI_V2_DT bool "LaCie Network Space Mini v2 NAS (Flattened Device Tree)" select ARCH_KIRKWOOD_DT help Say 'Y' here if you want your kernel to support the LaCie - Network Space Mini v2 NAS (aka SafeBox), using Flattened - Device Tree. + Network Space Mini v2 NAS using Flattened Device Tree. -config MACH_OPENBLOCKS_A6_DT - bool "Plat'Home OpenBlocks A6 (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the - Plat'Home OpenBlocks A6 (Flattened Device Tree). + This board is embedded in a product named CloudBox, which + provides automatic backup on a 100GB cloud storage. This + should not confused with a more recent LaCie NAS also named + CloudBox. For this last, the disk capacity is 1TB or above. -config MACH_TOPKICK_DT - bool "USI Topkick (Flattened Device Tree)" +config MACH_NETSPACE_V2_DT + bool "LaCie Network Space v2 NAS (Flattened Device Tree)" select ARCH_KIRKWOOD_DT help - Say 'Y' here if you want your kernel to support the - USI Topkick, using Flattened Device Tree - -config MACH_TS219 - bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS" - help - Say 'Y' here if you want your kernel to support the - QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and - TS-219P+ Turbo NAS devices. - -config MACH_TS41X - bool "QNAP TS-410, TS-410U, TS-419P, TS-419P+ and TS-419U Turbo NAS" - help - Say 'Y' here if you want your kernel to support the - QNAP TS-410, TS-410U, TS-419P, TS-419P+ and TS-419U Turbo - NAS devices. - -config MACH_DOCKSTAR - bool "Seagate FreeAgent DockStar" - help - Say 'Y' here if you want your kernel to support the - Seagate FreeAgent DockStar. - -config MACH_OPENRD - bool - -config MACH_OPENRD_BASE - bool "Marvell OpenRD Base Board" - select MACH_OPENRD - help - Say 'Y' here if you want your kernel to support the - Marvell OpenRD Base Board. - -config MACH_OPENRD_CLIENT - bool "Marvell OpenRD Client Board" - select MACH_OPENRD - help - Say 'Y' here if you want your kernel to support the - Marvell OpenRD Client Board. - -config MACH_OPENRD_ULTIMATE - bool "Marvell OpenRD Ultimate Board" - select MACH_OPENRD - help - Say 'Y' here if you want your kernel to support the - Marvell OpenRD Ultimate Board. - -config MACH_NETSPACE_V2 - bool "LaCie Network Space v2 NAS Board" - help - Say 'Y' here if you want your kernel to support the - LaCie Network Space v2 NAS. - -config MACH_INETSPACE_V2 - bool "LaCie Internet Space v2 NAS Board" - help - Say 'Y' here if you want your kernel to support the - LaCie Internet Space v2 NAS. - -config MACH_NETSPACE_MAX_V2 - bool "LaCie Network Space Max v2 NAS Board" - help - Say 'Y' here if you want your kernel to support the - LaCie Network Space Max v2 NAS. + Say 'Y' here if you want your kernel to support the LaCie + Network Space v2 NAS, using Flattened Device Tree. -config MACH_D2NET_V2 - bool "LaCie d2 Network v2 NAS Board" +config MACH_NSA310_DT + bool "ZyXEL NSA-310 (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + select ARM_ATAG_DTB_COMPAT help Say 'Y' here if you want your kernel to support the - LaCie d2 Network v2 NAS. + ZyXEL NSA-310 board (Flattened Device Tree). -config MACH_NET2BIG_V2 - bool "LaCie 2Big Network v2 NAS Board" +config MACH_OPENBLOCKS_A6_DT + bool "Plat'Home OpenBlocks A6 (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT help Say 'Y' here if you want your kernel to support the - LaCie 2Big Network v2 NAS. + Plat'Home OpenBlocks A6 (Flattened Device Tree). -config MACH_NET5BIG_V2 - bool "LaCie 5Big Network v2 NAS Board" +config MACH_READYNAS_DT + bool "NETGEAR ReadyNAS Duo v2 (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + select ARM_APPENDED_DTB + select ARM_ATAG_DTB_COMPAT help Say 'Y' here if you want your kernel to support the - LaCie 5Big Network v2 NAS. + NETGEAR ReadyNAS Duo v2 using Fattened Device Tree. -config MACH_T5325 - bool "HP t5325 Thin Client" +config MACH_TOPKICK_DT + bool "USI Topkick (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT help Say 'Y' here if you want your kernel to support the - HP t5325 Thin Client. + USI Topkick, using Flattened Device Tree -config MACH_NSA310_DT - bool "ZyXEL NSA-310 (Flattened Device Tree)" +config MACH_TS219_DT + bool "Device Tree for QNAP TS-11X, TS-21X NAS" select ARCH_KIRKWOOD_DT + select ARM_APPENDED_DTB select ARM_ATAG_DTB_COMPAT help - Say 'Y' here if you want your kernel to support the - ZyXEL NSA-310 board (Flattened Device Tree). + Say 'Y' here if you want your kernel to support the QNAP + TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and + TS-219P+ Turbo NAS devices using Fattened Device Tree. + There are two different Device Tree descriptions, depending + on if the device is based on an if the board uses the MV6281 + or MV6282. If you have the wrong one, the buttons will not + work. endmenu diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index 4cc4bee4d0cf..e1f3735d3415 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -1,42 +1,44 @@ -obj-y += common.o addr-map.o irq.o pcie.o mpp.o +obj-y += common.o irq.o pcie.o mpp.o +obj-$(CONFIG_MACH_D2NET_V2) += d2net_v2-setup.o lacie_v2-common.o obj-$(CONFIG_MACH_DB88F6281_BP) += db88f6281-bp-setup.o -obj-$(CONFIG_MACH_RD88F6192_NAS) += rd88f6192-nas-setup.o -obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o -obj-$(CONFIG_MACH_MV88F6281GTW_GE) += mv88f6281gtw_ge-setup.o -obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o +obj-$(CONFIG_MACH_DOCKSTAR) += dockstar-setup.o obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG) += sheevaplug-setup.o obj-$(CONFIG_MACH_GURUPLUG) += guruplug-setup.o -obj-$(CONFIG_MACH_DOCKSTAR) += dockstar-setup.o -obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o -obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o -obj-$(CONFIG_MACH_OPENRD) += openrd-setup.o -obj-$(CONFIG_MACH_NETSPACE_V2) += netspace_v2-setup.o lacie_v2-common.o obj-$(CONFIG_MACH_INETSPACE_V2) += netspace_v2-setup.o lacie_v2-common.o -obj-$(CONFIG_MACH_NETSPACE_MAX_V2) += netspace_v2-setup.o lacie_v2-common.o -obj-$(CONFIG_MACH_D2NET_V2) += d2net_v2-setup.o lacie_v2-common.o +obj-$(CONFIG_MACH_MV88F6281GTW_GE) += mv88f6281gtw_ge-setup.o obj-$(CONFIG_MACH_NET2BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o obj-$(CONFIG_MACH_NET5BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o +obj-$(CONFIG_MACH_NETSPACE_MAX_V2) += netspace_v2-setup.o lacie_v2-common.o +obj-$(CONFIG_MACH_NETSPACE_V2) += netspace_v2-setup.o lacie_v2-common.o +obj-$(CONFIG_MACH_OPENRD) += openrd-setup.o +obj-$(CONFIG_MACH_RD88F6192_NAS) += rd88f6192-nas-setup.o +obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o +obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o obj-$(CONFIG_MACH_T5325) += t5325-setup.o +obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o +obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o obj-$(CONFIG_ARCH_KIRKWOOD_DT) += board-dt.o -obj-$(CONFIG_MACH_DREAMPLUG_DT) += board-dreamplug.o -obj-$(CONFIG_MACH_GURUPLUG_DT) += board-guruplug.o -obj-$(CONFIG_MACH_ICONNECT_DT) += board-iconnect.o +obj-$(CONFIG_MACH_CLOUDBOX_DT) += board-ns2.o obj-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += board-dnskw.o -obj-$(CONFIG_MACH_IB62X0_DT) += board-ib62x0.o -obj-$(CONFIG_MACH_TS219_DT) += board-ts219.o tsx1x-common.o obj-$(CONFIG_MACH_DOCKSTAR_DT) += board-dockstar.o +obj-$(CONFIG_MACH_DREAMPLUG_DT) += board-dreamplug.o obj-$(CONFIG_MACH_GOFLEXNET_DT) += board-goflexnet.o -obj-$(CONFIG_MACH_LSXL_DT) += board-lsxl.o +obj-$(CONFIG_MACH_GURUPLUG_DT) += board-guruplug.o +obj-$(CONFIG_MACH_IB62X0_DT) += board-ib62x0.o +obj-$(CONFIG_MACH_ICONNECT_DT) += board-iconnect.o +obj-$(CONFIG_MACH_INETSPACE_V2_DT) += board-ns2.o obj-$(CONFIG_MACH_IOMEGA_IX2_200_DT) += board-iomega_ix2_200.o obj-$(CONFIG_MACH_KM_KIRKWOOD_DT) += board-km_kirkwood.o -obj-$(CONFIG_MACH_INETSPACE_V2_DT) += board-ns2.o +obj-$(CONFIG_MACH_LSXL_DT) += board-lsxl.o obj-$(CONFIG_MACH_MPLCEC4_DT) += board-mplcec4.o -obj-$(CONFIG_MACH_NETSPACE_V2_DT) += board-ns2.o -obj-$(CONFIG_MACH_NETSPACE_MAX_V2_DT) += board-ns2.o obj-$(CONFIG_MACH_NETSPACE_LITE_V2_DT) += board-ns2.o +obj-$(CONFIG_MACH_NETSPACE_MAX_V2_DT) += board-ns2.o obj-$(CONFIG_MACH_NETSPACE_MINI_V2_DT) += board-ns2.o +obj-$(CONFIG_MACH_NETSPACE_V2_DT) += board-ns2.o obj-$(CONFIG_MACH_NSA310_DT) += board-nsa310.o obj-$(CONFIG_MACH_OPENBLOCKS_A6_DT) += board-openblocks_a6.o +obj-$(CONFIG_MACH_READYNAS_DT) += board-readynas.o obj-$(CONFIG_MACH_TOPKICK_DT) += board-usi_topkick.o +obj-$(CONFIG_MACH_TS219_DT) += board-ts219.o tsx1x-common.o diff --git a/arch/arm/mach-kirkwood/addr-map.c b/arch/arm/mach-kirkwood/addr-map.c deleted file mode 100644 index 8f0d162a1e1d..000000000000 --- a/arch/arm/mach-kirkwood/addr-map.c +++ /dev/null @@ -1,91 +0,0 @@ -/* - * arch/arm/mach-kirkwood/addr-map.c - * - * Address map functions for Marvell Kirkwood SoCs - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/mbus.h> -#include <linux/io.h> -#include <mach/hardware.h> -#include <plat/addr-map.h> -#include "common.h" - -/* - * Generic Address Decode Windows bit settings - */ -#define TARGET_DEV_BUS 1 -#define TARGET_SRAM 3 -#define TARGET_PCIE 4 -#define ATTR_DEV_SPI_ROM 0x1e -#define ATTR_DEV_BOOT 0x1d -#define ATTR_DEV_NAND 0x2f -#define ATTR_DEV_CS3 0x37 -#define ATTR_DEV_CS2 0x3b -#define ATTR_DEV_CS1 0x3d -#define ATTR_DEV_CS0 0x3e -#define ATTR_PCIE_IO 0xe0 -#define ATTR_PCIE_MEM 0xe8 -#define ATTR_PCIE1_IO 0xd0 -#define ATTR_PCIE1_MEM 0xd8 -#define ATTR_SRAM 0x01 - -/* - * Description of the windows needed by the platform code - */ -static struct __initdata orion_addr_map_cfg addr_map_cfg = { - .num_wins = 8, - .remappable_wins = 4, - .bridge_virt_base = BRIDGE_VIRT_BASE, -}; - -static const struct __initdata orion_addr_map_info addr_map_info[] = { - /* - * Windows for PCIe IO+MEM space. - */ - { 0, KIRKWOOD_PCIE_IO_PHYS_BASE, KIRKWOOD_PCIE_IO_SIZE, - TARGET_PCIE, ATTR_PCIE_IO, KIRKWOOD_PCIE_IO_BUS_BASE - }, - { 1, KIRKWOOD_PCIE_MEM_PHYS_BASE, KIRKWOOD_PCIE_MEM_SIZE, - TARGET_PCIE, ATTR_PCIE_MEM, KIRKWOOD_PCIE_MEM_BUS_BASE - }, - { 2, KIRKWOOD_PCIE1_IO_PHYS_BASE, KIRKWOOD_PCIE1_IO_SIZE, - TARGET_PCIE, ATTR_PCIE1_IO, KIRKWOOD_PCIE1_IO_BUS_BASE - }, - { 3, KIRKWOOD_PCIE1_MEM_PHYS_BASE, KIRKWOOD_PCIE1_MEM_SIZE, - TARGET_PCIE, ATTR_PCIE1_MEM, KIRKWOOD_PCIE1_MEM_BUS_BASE - }, - /* - * Window for NAND controller. - */ - { 4, KIRKWOOD_NAND_MEM_PHYS_BASE, KIRKWOOD_NAND_MEM_SIZE, - TARGET_DEV_BUS, ATTR_DEV_NAND, -1 - }, - /* - * Window for SRAM. - */ - { 5, KIRKWOOD_SRAM_PHYS_BASE, KIRKWOOD_SRAM_SIZE, - TARGET_SRAM, ATTR_SRAM, -1 - }, - /* End marker */ - { -1, 0, 0, 0, 0, 0 } -}; - -void __init kirkwood_setup_cpu_mbus(void) -{ - /* - * Disable, clear and configure windows. - */ - orion_config_wins(&addr_map_cfg, addr_map_info); - - /* - * Setup MBUS dram target info. - */ - orion_setup_cpu_mbus_target(&addr_map_cfg, - (void __iomem *) DDR_WINDOW_CPU_BASE); -} diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index d367aa6b47bb..e9647b80cb59 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -93,7 +93,7 @@ static void __init kirkwood_dt_init(void) */ writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG); - kirkwood_setup_cpu_mbus(); + kirkwood_setup_wins(); kirkwood_l2_init(); @@ -139,16 +139,20 @@ static void __init kirkwood_dt_init(void) if (of_machine_is_compatible("keymile,km_kirkwood")) km_kirkwood_init(); - if (of_machine_is_compatible("lacie,inetspace_v2") || - of_machine_is_compatible("lacie,netspace_v2") || - of_machine_is_compatible("lacie,netspace_max_v2") || + if (of_machine_is_compatible("lacie,cloudbox") || + of_machine_is_compatible("lacie,inetspace_v2") || of_machine_is_compatible("lacie,netspace_lite_v2") || - of_machine_is_compatible("lacie,netspace_mini_v2")) + of_machine_is_compatible("lacie,netspace_max_v2") || + of_machine_is_compatible("lacie,netspace_mini_v2") || + of_machine_is_compatible("lacie,netspace_v2")) ns2_init(); if (of_machine_is_compatible("mpl,cec4")) mplcec4_init(); + if (of_machine_is_compatible("netgear,readynas-duo-v2")) + netgear_readynas_init(); + if (of_machine_is_compatible("plathome,openblocks-a6")) openblocks_a6_init(); @@ -171,12 +175,14 @@ static const char * const kirkwood_dt_board_compat[] = { "buffalo,lsxl", "iom,ix2-200", "keymile,km_kirkwood", + "lacie,cloudbox", "lacie,inetspace_v2", - "lacie,netspace_max_v2", - "lacie,netspace_v2", "lacie,netspace_lite_v2", + "lacie,netspace_max_v2", "lacie,netspace_mini_v2", + "lacie,netspace_v2", "mpl,cec4", + "netgear,readynas-duo-v2", "plathome,openblocks-a6", "usi,topkick", "zyxel,nsa310", diff --git a/arch/arm/mach-kirkwood/board-guruplug.c b/arch/arm/mach-kirkwood/board-guruplug.c index 0a0df4554d8b..a857163954a5 100644 --- a/arch/arm/mach-kirkwood/board-guruplug.c +++ b/arch/arm/mach-kirkwood/board-guruplug.c @@ -13,7 +13,6 @@ #include <linux/init.h> #include <linux/mv643xx_eth.h> #include <linux/gpio.h> -#include <linux/platform_data/mmc-mvsdio.h> #include "common.h" static struct mv643xx_eth_platform_data guruplug_ge00_data = { @@ -24,10 +23,6 @@ static struct mv643xx_eth_platform_data guruplug_ge01_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(1), }; -static struct mvsdio_platform_data guruplug_mvsdio_data = { - /* unfortunately the CD signal has not been connected */ -}; - void __init guruplug_dt_init(void) { /* @@ -35,5 +30,4 @@ void __init guruplug_dt_init(void) */ kirkwood_ge00_init(&guruplug_ge00_data); kirkwood_ge01_init(&guruplug_ge01_data); - kirkwood_sdio_init(&guruplug_mvsdio_data); } diff --git a/arch/arm/mach-kirkwood/board-ns2.c b/arch/arm/mach-kirkwood/board-ns2.c index f2ea3b7ad726..f8f660525ace 100644 --- a/arch/arm/mach-kirkwood/board-ns2.c +++ b/arch/arm/mach-kirkwood/board-ns2.c @@ -27,7 +27,8 @@ void __init ns2_init(void) /* * Basic setup. Needs to be called early. */ - if (of_machine_is_compatible("lacie,netspace_lite_v2") || + if (of_machine_is_compatible("lacie,cloudbox") || + of_machine_is_compatible("lacie,netspace_lite_v2") || of_machine_is_compatible("lacie,netspace_mini_v2")) ns2_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0); kirkwood_ge00_init(&ns2_ge00_data); diff --git a/arch/arm/mach-kirkwood/board-readynas.c b/arch/arm/mach-kirkwood/board-readynas.c new file mode 100644 index 000000000000..fb42c20e273f --- /dev/null +++ b/arch/arm/mach-kirkwood/board-readynas.c @@ -0,0 +1,28 @@ +/* + * NETGEAR ReadyNAS Duo v2 Board setup for drivers not already + * converted to DT. + * + * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mv643xx_eth.h> +#include <mach/kirkwood.h> +#include "common.h" + +static struct mv643xx_eth_platform_data netgear_readynas_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +void __init netgear_readynas_init(void) +{ + kirkwood_ge00_init(&netgear_readynas_ge00_data); + kirkwood_pcie_init(KW_PCIE0); +} diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index 49792a0cd2d3..c2cae69e6d2b 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -33,7 +33,6 @@ #include <linux/platform_data/usb-ehci-orion.h> #include <plat/common.h> #include <plat/time.h> -#include <plat/addr-map.h> #include <linux/platform_data/dma-mv_xor.h> #include "common.h" @@ -535,6 +534,9 @@ void __init kirkwood_init_early(void) * the allocations won't fail. */ init_dma_coherent_pool_size(SZ_1M); + mvebu_mbus_init("marvell,kirkwood-mbus", + BRIDGE_WINS_BASE, BRIDGE_WINS_SZ, + DDR_WINDOW_CPU_BASE, DDR_WINDOW_CPU_SZ); } int kirkwood_tclk; @@ -650,6 +652,38 @@ char * __init kirkwood_id(void) } } +void __init kirkwood_setup_wins(void) +{ + /* + * The PCIe windows will no longer be statically allocated + * here once Kirkwood is migrated to the pci-mvebu driver. + */ + mvebu_mbus_add_window_remap_flags("pcie0.0", + KIRKWOOD_PCIE_IO_PHYS_BASE, + KIRKWOOD_PCIE_IO_SIZE, + KIRKWOOD_PCIE_IO_BUS_BASE, + MVEBU_MBUS_PCI_IO); + mvebu_mbus_add_window_remap_flags("pcie0.0", + KIRKWOOD_PCIE_MEM_PHYS_BASE, + KIRKWOOD_PCIE_MEM_SIZE, + MVEBU_MBUS_NO_REMAP, + MVEBU_MBUS_PCI_MEM); + mvebu_mbus_add_window_remap_flags("pcie1.0", + KIRKWOOD_PCIE1_IO_PHYS_BASE, + KIRKWOOD_PCIE1_IO_SIZE, + KIRKWOOD_PCIE1_IO_BUS_BASE, + MVEBU_MBUS_PCI_IO); + mvebu_mbus_add_window_remap_flags("pcie1.0", + KIRKWOOD_PCIE1_MEM_PHYS_BASE, + KIRKWOOD_PCIE1_MEM_SIZE, + MVEBU_MBUS_NO_REMAP, + MVEBU_MBUS_PCI_MEM); + mvebu_mbus_add_window("nand", KIRKWOOD_NAND_MEM_PHYS_BASE, + KIRKWOOD_NAND_MEM_SIZE); + mvebu_mbus_add_window("sram", KIRKWOOD_SRAM_PHYS_BASE, + KIRKWOOD_SRAM_SIZE); +} + void __init kirkwood_l2_init(void) { #ifdef CONFIG_CACHE_FEROCEON_L2 @@ -675,7 +709,7 @@ void __init kirkwood_init(void) */ writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG); - kirkwood_setup_cpu_mbus(); + kirkwood_setup_wins(); kirkwood_l2_init(); diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h index 5ed70565c843..21da3b1ebd7b 100644 --- a/arch/arm/mach-kirkwood/common.h +++ b/arch/arm/mach-kirkwood/common.h @@ -30,7 +30,7 @@ void kirkwood_init(void); void kirkwood_init_early(void); void kirkwood_init_irq(void); -void kirkwood_setup_cpu_mbus(void); +void kirkwood_setup_wins(void); void kirkwood_enable_pcie(void); void kirkwood_pcie_id(u32 *dev, u32 *rev); @@ -141,12 +141,24 @@ void openblocks_a6_init(void); static inline void openblocks_a6_init(void) {}; #endif +#ifdef CONFIG_MACH_READYNAS_DT +void netgear_readynas_init(void); +#else +static inline void netgear_readynas_init(void) {}; +#endif + #ifdef CONFIG_MACH_TOPKICK_DT void usi_topkick_init(void); #else static inline void usi_topkick_init(void) {}; #endif +#ifdef CONFIG_MACH_CLOUDBOX_DT +void cloudbox_init(void); +#else +static inline void cloudbox_init(void) {}; +#endif + /* early init functions not converted to fdt yet */ char *kirkwood_id(void); void kirkwood_l2_init(void); diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h index a05563a31c95..92976cef3910 100644 --- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h +++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h @@ -60,8 +60,9 @@ * Register Map */ #define DDR_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x00000) -#define DDR_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x00000) -#define DDR_WINDOW_CPU_BASE (DDR_VIRT_BASE + 0x1500) +#define DDR_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x00000) +#define DDR_WINDOW_CPU_BASE (DDR_PHYS_BASE + 0x1500) +#define DDR_WINDOW_CPU_SZ (0x20) #define DDR_OPERATION_BASE (DDR_PHYS_BASE + 0x1418) #define DEV_BUS_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x10000) @@ -80,6 +81,8 @@ #define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x20000) #define BRIDGE_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x20000) +#define BRIDGE_WINS_BASE (BRIDGE_PHYS_BASE) +#define BRIDGE_WINS_SZ (0x80) #define CRYPTO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x30000) diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c index d96ad4c09972..7f43e6c2f8c0 100644 --- a/arch/arm/mach-kirkwood/pcie.c +++ b/arch/arm/mach-kirkwood/pcie.c @@ -17,7 +17,6 @@ #include <asm/mach/pci.h> #include <plat/pcie.h> #include <mach/bridge-regs.h> -#include <plat/addr-map.h> #include "common.h" static void kirkwood_enable_pcie_clk(const char *port) diff --git a/arch/arm/mach-l7200/include/mach/debug-macro.S b/arch/arm/mach-l7200/include/mach/debug-macro.S deleted file mode 100644 index 0b4e760159b9..000000000000 --- a/arch/arm/mach-l7200/include/mach/debug-macro.S +++ /dev/null @@ -1,38 +0,0 @@ -/* arch/arm/mach-l7200/include/mach/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - - .equ io_virt, IO_BASE - .equ io_phys, IO_START - - .macro addruart, rp, rv, tmp - mov \rp, #0x00044000 @ UART1 -@ mov \rp, #0x00045000 @ UART2 - add \rv, \rp, #io_virt @ virtual address - add \rp, \rp, #io_phys @ physical base address - .endm - - .macro senduart,rd,rx - str \rd, [\rx, #0x0] @ UARTDR - .endm - - .macro waituart,rd,rx -1001: ldr \rd, [\rx, #0x18] @ UARTFLG - tst \rd, #1 << 5 @ UARTFLGUTXFF - 1 when full - bne 1001b - .endm - - .macro busyuart,rd,rx -1001: ldr \rd, [\rx, #0x18] @ UARTFLG - tst \rd, #1 << 3 @ UARTFLGUBUSY - 1 when busy - bne 1001b - .endm diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c index 9f64d5632e07..5b660ec09ef5 100644 --- a/arch/arm/mach-mmp/aspenite.c +++ b/arch/arm/mach-mmp/aspenite.c @@ -9,6 +9,7 @@ * publishhed by the Free Software Foundation. */ #include <linux/gpio.h> +#include <linux/gpio-pxa.h> #include <linux/init.h> #include <linux/kernel.h> #include <linux/platform_device.h> @@ -110,6 +111,10 @@ static unsigned long common_pin_config[] __initdata = { GPIO121_KP_MKIN4, }; +static struct pxa_gpio_platform_data pxa168_gpio_pdata = { + .irq_base = MMP_GPIO_TO_IRQ(0), +}; + static struct smc91x_platdata smc91x_info = { .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, }; @@ -223,13 +228,7 @@ static struct pxa27x_keypad_platform_data aspenite_keypad_info __initdata = { }; #if defined(CONFIG_USB_EHCI_MV) -static char *pxa168_sph_clock_name[] = { - [0] = "PXA168-USBCLK", -}; - static struct mv_usb_platform_data pxa168_sph_pdata = { - .clknum = 1, - .clkname = pxa168_sph_clock_name, .mode = MV_USB_MODE_HOST, .phy_init = pxa_usb_phy_init, .phy_deinit = pxa_usb_phy_deinit, @@ -248,6 +247,8 @@ static void __init common_init(void) pxa168_add_nand(&aspenite_nand_info); pxa168_add_fb(&aspenite_lcd_info); pxa168_add_keypad(&aspenite_keypad_info); + platform_device_add_data(&pxa168_device_gpio, &pxa168_gpio_pdata, + sizeof(struct pxa_gpio_platform_data)); platform_device_register(&pxa168_device_gpio); /* off-chip devices */ diff --git a/arch/arm/mach-mmp/avengers_lite.c b/arch/arm/mach-mmp/avengers_lite.c index 1f94957b56ae..a451a0f4d512 100644 --- a/arch/arm/mach-mmp/avengers_lite.c +++ b/arch/arm/mach-mmp/avengers_lite.c @@ -12,6 +12,7 @@ #include <linux/init.h> #include <linux/kernel.h> +#include <linux/gpio-pxa.h> #include <linux/platform_device.h> #include <asm/mach-types.h> @@ -32,12 +33,18 @@ static unsigned long avengers_lite_pin_config_V16F[] __initdata = { GPIO89_UART2_RXD, }; +static struct pxa_gpio_platform_data pxa168_gpio_pdata = { + .irq_base = MMP_GPIO_TO_IRQ(0), +}; + static void __init avengers_lite_init(void) { mfp_config(ARRAY_AND_SIZE(avengers_lite_pin_config_V16F)); /* on-chip devices */ pxa168_add_uart(2); + platform_device_add_data(&pxa168_device_gpio, &pxa168_gpio_pdata, + sizeof(struct pxa_gpio_platform_data)); platform_device_register(&pxa168_device_gpio); } diff --git a/arch/arm/mach-mmp/brownstone.c b/arch/arm/mach-mmp/brownstone.c index 2358011c7d8e..ac25544b8cdb 100644 --- a/arch/arm/mach-mmp/brownstone.c +++ b/arch/arm/mach-mmp/brownstone.c @@ -14,6 +14,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/gpio-pxa.h> #include <linux/regulator/machine.h> #include <linux/regulator/max8649.h> #include <linux/regulator/fixed.h> @@ -104,6 +105,10 @@ static unsigned long brownstone_pin_config[] __initdata = { GPIO89_GPIO, }; +static struct pxa_gpio_platform_data mmp2_gpio_pdata = { + .irq_base = MMP_GPIO_TO_IRQ(0), +}; + static struct regulator_consumer_supply max8649_supply[] = { REGULATOR_SUPPLY("vcc_core", NULL), }; @@ -202,6 +207,8 @@ static void __init brownstone_init(void) /* on-chip devices */ mmp2_add_uart(1); mmp2_add_uart(3); + platform_device_add_data(&mmp2_device_gpio, &mmp2_gpio_pdata, + sizeof(struct pxa_gpio_platform_data)); platform_device_register(&mmp2_device_gpio); mmp2_add_twsi(1, NULL, ARRAY_AND_SIZE(brownstone_twsi1_info)); mmp2_add_sdhost(0, &mmp2_sdh_platdata_mmc0); /* SD/MMC */ diff --git a/arch/arm/mach-mmp/clock-mmp2.c b/arch/arm/mach-mmp/clock-mmp2.c index 21d22002cd19..53d77cbd6000 100644 --- a/arch/arm/mach-mmp/clock-mmp2.c +++ b/arch/arm/mach-mmp/clock-mmp2.c @@ -98,7 +98,7 @@ static struct clk_lookup mmp2_clkregs[] = { INIT_CLKREG(&clk_twsi5, "pxa2xx-i2c.4", NULL), INIT_CLKREG(&clk_twsi6, "pxa2xx-i2c.5", NULL), INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL), - INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL), + INIT_CLKREG(&clk_gpio, "mmp2-gpio", NULL), INIT_CLKREG(&clk_sdh0, "sdhci-pxav3.0", "PXA-SDHCLK"), INIT_CLKREG(&clk_sdh1, "sdhci-pxav3.1", "PXA-SDHCLK"), INIT_CLKREG(&clk_sdh2, "sdhci-pxav3.2", "PXA-SDHCLK"), diff --git a/arch/arm/mach-mmp/clock-pxa168.c b/arch/arm/mach-mmp/clock-pxa168.c index 5e6c18ccebd4..c572f219ae26 100644 --- a/arch/arm/mach-mmp/clock-pxa168.c +++ b/arch/arm/mach-mmp/clock-pxa168.c @@ -78,7 +78,7 @@ static struct clk_lookup pxa168_clkregs[] = { INIT_CLKREG(&clk_ssp5, "pxa168-ssp.4", NULL), INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL), INIT_CLKREG(&clk_lcd, "pxa168-fb", NULL), - INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL), + INIT_CLKREG(&clk_gpio, "mmp-gpio", NULL), INIT_CLKREG(&clk_keypad, "pxa27x-keypad", NULL), INIT_CLKREG(&clk_eth, "pxa168-eth", "MFUCLK"), INIT_CLKREG(&clk_usb, NULL, "PXA168-USBCLK"), diff --git a/arch/arm/mach-mmp/clock-pxa910.c b/arch/arm/mach-mmp/clock-pxa910.c index 933ea71d0b56..379e1df61c70 100644 --- a/arch/arm/mach-mmp/clock-pxa910.c +++ b/arch/arm/mach-mmp/clock-pxa910.c @@ -56,7 +56,7 @@ static struct clk_lookup pxa910_clkregs[] = { INIT_CLKREG(&clk_pwm3, "pxa910-pwm.2", NULL), INIT_CLKREG(&clk_pwm4, "pxa910-pwm.3", NULL), INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL), - INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL), + INIT_CLKREG(&clk_gpio, "mmp-gpio", NULL), INIT_CLKREG(&clk_u2o, NULL, "U2OCLK"), INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL), }; diff --git a/arch/arm/mach-mmp/flint.c b/arch/arm/mach-mmp/flint.c index 754c352dd02b..6291c33d83e2 100644 --- a/arch/arm/mach-mmp/flint.c +++ b/arch/arm/mach-mmp/flint.c @@ -16,6 +16,7 @@ #include <linux/smc91x.h> #include <linux/io.h> #include <linux/gpio.h> +#include <linux/gpio-pxa.h> #include <linux/interrupt.h> #include <asm/mach-types.h> @@ -77,6 +78,10 @@ static unsigned long flint_pin_config[] __initdata = { GPIO160_ND_RDY1, }; +static struct pxa_gpio_platform_data mmp2_gpio_pdata = { + .irq_base = MMP_GPIO_TO_IRQ(0), +}; + static struct smc91x_platdata flint_smc91x_info = { .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, }; @@ -111,6 +116,8 @@ static void __init flint_init(void) /* on-chip devices */ mmp2_add_uart(1); mmp2_add_uart(2); + platform_device_add_data(&mmp2_device_gpio, &mmp2_gpio_pdata, + sizeof(struct pxa_gpio_platform_data)); platform_device_register(&mmp2_device_gpio); /* off-chip devices */ diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c index f62b68d926f4..d81b2475e67e 100644 --- a/arch/arm/mach-mmp/gplugd.c +++ b/arch/arm/mach-mmp/gplugd.c @@ -11,6 +11,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/gpio.h> +#include <linux/gpio-pxa.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> @@ -128,6 +129,10 @@ static unsigned long gplugd_pin_config[] __initdata = { GPIO116_I2S_TXD }; +static struct pxa_gpio_platform_data pxa168_gpio_pdata = { + .irq_base = MMP_GPIO_TO_IRQ(0), +}; + static struct i2c_board_info gplugd_i2c_board_info[] = { { .type = "isl1208", @@ -186,6 +191,8 @@ static void __init gplugd_init(void) pxa168_add_uart(3); pxa168_add_ssp(1); pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(gplugd_i2c_board_info)); + platform_device_add_data(&pxa168_device_gpio, &pxa168_gpio_pdata, + sizeof(struct pxa_gpio_platform_data)); platform_device_register(&pxa168_device_gpio); pxa168_add_eth(&gplugd_eth_platform_data); diff --git a/arch/arm/mach-mmp/include/mach/debug-macro.S b/arch/arm/mach-mmp/include/mach/debug-macro.S deleted file mode 100644 index 5c3cc29688ab..000000000000 --- a/arch/arm/mach-mmp/include/mach/debug-macro.S +++ /dev/null @@ -1,30 +0,0 @@ -/* arch/arm/mach-mmp/include/mach/debug-macro.S - * - * Debugging macro include header - * - * Copied from arch/arm/mach-pxa/include/mach/debug.S - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#if defined(CONFIG_DEBUG_MMP_UART2) -#define MMP_UART_OFFSET 0x00017000 -#elif defined(CONFIG_DEBUG_MMP_UART3) -#define MMP_UART_OFFSET 0x00018000 -#else -#error "Select uart for DEBUG_LL" -#endif - -#include <mach/addr-map.h> - - .macro addruart, rp, rv, tmp - ldr \rp, =APB_PHYS_BASE @ physical - ldr \rv, =APB_VIRT_BASE @ virtual - orr \rp, \rp, #MMP_UART_OFFSET - orr \rv, \rv, #MMP_UART_OFFSET - .endm - -#define UART_SHIFT 2 -#include <asm/hardware/debug-8250.S> diff --git a/arch/arm/mach-mmp/jasper.c b/arch/arm/mach-mmp/jasper.c index 66634fd0ecb0..0e9e5c05b37c 100644 --- a/arch/arm/mach-mmp/jasper.c +++ b/arch/arm/mach-mmp/jasper.c @@ -12,6 +12,7 @@ #include <linux/init.h> #include <linux/kernel.h> +#include <linux/gpio-pxa.h> #include <linux/platform_device.h> #include <linux/io.h> #include <linux/regulator/machine.h> @@ -99,6 +100,10 @@ static unsigned long jasper_pin_config[] __initdata = { GPIO151_MMC3_CLK, }; +static struct pxa_gpio_platform_data mmp2_gpio_pdata = { + .irq_base = MMP_GPIO_TO_IRQ(0), +}; + static struct regulator_consumer_supply max8649_supply[] = { REGULATOR_SUPPLY("vcc_core", NULL), }; @@ -165,6 +170,9 @@ static void __init jasper_init(void) mmp2_add_uart(1); mmp2_add_uart(3); mmp2_add_twsi(1, NULL, ARRAY_AND_SIZE(jasper_twsi1_info)); + platform_device_add_data(&mmp2_device_gpio, &mmp2_gpio_pdata, + sizeof(struct pxa_gpio_platform_data)); + platform_device_register(&mmp2_device_gpio); mmp2_add_sdhost(0, &mmp2_sdh_platdata_mmc0); /* SD/MMC */ regulator_has_full_constraints(); diff --git a/arch/arm/mach-mmp/mmp-dt.c b/arch/arm/mach-mmp/mmp-dt.c index d063efa0a4f1..b37915dc4470 100644 --- a/arch/arm/mach-mmp/mmp-dt.c +++ b/arch/arm/mach-mmp/mmp-dt.c @@ -28,7 +28,7 @@ static const struct of_dev_auxdata pxa168_auxdata_lookup[] __initconst = { OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4026000, "pxa2xx-uart.2", NULL), OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4011000, "pxa2xx-i2c.0", NULL), OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4025000, "pxa2xx-i2c.1", NULL), - OF_DEV_AUXDATA("mrvl,mmp-gpio", 0xd4019000, "pxa-gpio", NULL), + OF_DEV_AUXDATA("marvell,mmp-gpio", 0xd4019000, "mmp-gpio", NULL), OF_DEV_AUXDATA("mrvl,mmp-rtc", 0xd4010000, "sa1100-rtc", NULL), {} }; @@ -39,7 +39,7 @@ static const struct of_dev_auxdata pxa910_auxdata_lookup[] __initconst = { OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4036000, "pxa2xx-uart.2", NULL), OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4011000, "pxa2xx-i2c.0", NULL), OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4037000, "pxa2xx-i2c.1", NULL), - OF_DEV_AUXDATA("mrvl,mmp-gpio", 0xd4019000, "pxa-gpio", NULL), + OF_DEV_AUXDATA("marvell,mmp-gpio", 0xd4019000, "mmp-gpio", NULL), OF_DEV_AUXDATA("mrvl,mmp-rtc", 0xd4010000, "sa1100-rtc", NULL), {} }; diff --git a/arch/arm/mach-mmp/mmp2-dt.c b/arch/arm/mach-mmp/mmp2-dt.c index fad431aa6e09..4ac256720f7d 100644 --- a/arch/arm/mach-mmp/mmp2-dt.c +++ b/arch/arm/mach-mmp/mmp2-dt.c @@ -31,7 +31,7 @@ static const struct of_dev_auxdata mmp2_auxdata_lookup[] __initconst = { OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4016000, "pxa2xx-uart.3", NULL), OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4011000, "pxa2xx-i2c.0", NULL), OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4025000, "pxa2xx-i2c.1", NULL), - OF_DEV_AUXDATA("mrvl,mmp-gpio", 0xd4019000, "pxa-gpio", NULL), + OF_DEV_AUXDATA("marvell,mmp-gpio", 0xd4019000, "mmp2-gpio", NULL), OF_DEV_AUXDATA("mrvl,mmp-rtc", 0xd4010000, "sa1100-rtc", NULL), {} }; diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c index d94d114eef7b..c7592f168bbd 100644 --- a/arch/arm/mach-mmp/mmp2.c +++ b/arch/arm/mach-mmp/mmp2.c @@ -164,7 +164,7 @@ struct resource mmp2_resource_gpio[] = { }; struct platform_device mmp2_device_gpio = { - .name = "pxa-gpio", + .name = "mmp2-gpio", .id = -1, .num_resources = ARRAY_SIZE(mmp2_resource_gpio), .resource = mmp2_resource_gpio, diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c index 9bc7b86a86a7..a30dcf3b7d9e 100644 --- a/arch/arm/mach-mmp/pxa168.c +++ b/arch/arm/mach-mmp/pxa168.c @@ -125,7 +125,7 @@ struct resource pxa168_resource_gpio[] = { }; struct platform_device pxa168_device_gpio = { - .name = "pxa-gpio", + .name = "mmp-gpio", .id = -1, .num_resources = ARRAY_SIZE(pxa168_resource_gpio), .resource = pxa168_resource_gpio, diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c index 36cb321a3d70..ce6393acad86 100644 --- a/arch/arm/mach-mmp/pxa910.c +++ b/arch/arm/mach-mmp/pxa910.c @@ -152,7 +152,7 @@ struct resource pxa910_resource_gpio[] = { }; struct platform_device pxa910_device_gpio = { - .name = "pxa-gpio", + .name = "mmp-gpio", .id = -1, .num_resources = ARRAY_SIZE(pxa910_resource_gpio), .resource = pxa910_resource_gpio, diff --git a/arch/arm/mach-mmp/tavorevb.c b/arch/arm/mach-mmp/tavorevb.c index 4c127d23955d..cdfc9bfee1a4 100644 --- a/arch/arm/mach-mmp/tavorevb.c +++ b/arch/arm/mach-mmp/tavorevb.c @@ -8,6 +8,7 @@ * publishhed by the Free Software Foundation. */ #include <linux/gpio.h> +#include <linux/gpio-pxa.h> #include <linux/init.h> #include <linux/kernel.h> #include <linux/platform_device.h> @@ -60,6 +61,10 @@ static unsigned long tavorevb_pin_config[] __initdata = { DF_RDY0_DF_RDY0, }; +static struct pxa_gpio_platform_data pxa910_gpio_pdata = { + .irq_base = MMP_GPIO_TO_IRQ(0), +}; + static struct smc91x_platdata tavorevb_smc91x_info = { .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, }; @@ -93,6 +98,8 @@ static void __init tavorevb_init(void) /* on-chip devices */ pxa910_add_uart(1); + platform_device_add_data(&pxa910_device_gpio, &pxa910_gpio_pdata, + sizeof(struct pxa_gpio_platform_data)); platform_device_register(&pxa910_device_gpio); /* off-chip devices */ diff --git a/arch/arm/mach-mmp/teton_bga.c b/arch/arm/mach-mmp/teton_bga.c index 8609967975ed..e4d95b4c6bb2 100644 --- a/arch/arm/mach-mmp/teton_bga.c +++ b/arch/arm/mach-mmp/teton_bga.c @@ -16,6 +16,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/gpio.h> +#include <linux/gpio-pxa.h> #include <linux/input.h> #include <linux/platform_data/keypad-pxa27x.h> #include <linux/i2c.h> @@ -49,6 +50,10 @@ static unsigned long teton_bga_pin_config[] __initdata = { GPIO78_GPIO, }; +static struct pxa_gpio_platform_data pxa168_gpio_pdata = { + .irq_base = MMP_GPIO_TO_IRQ(0), +}; + static unsigned int teton_bga_matrix_key_map[] = { KEY(0, 6, KEY_ESC), KEY(0, 7, KEY_ENTER), @@ -79,6 +84,8 @@ static void __init teton_bga_init(void) pxa168_add_uart(1); pxa168_add_keypad(&teton_bga_keypad_info); pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(teton_bga_i2c_info)); + platform_device_add_data(&pxa168_device_gpio, &pxa168_gpio_pdata, + sizeof(struct pxa_gpio_platform_data)); platform_device_register(&pxa168_device_gpio); } diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c index 22a9058f9f4d..8483906d4308 100644 --- a/arch/arm/mach-mmp/ttc_dkb.c +++ b/arch/arm/mach-mmp/ttc_dkb.c @@ -17,6 +17,7 @@ #include <linux/interrupt.h> #include <linux/i2c/pca953x.h> #include <linux/gpio.h> +#include <linux/gpio-pxa.h> #include <linux/mfd/88pm860x.h> #include <linux/platform_data/mv_usb.h> #include <linux/spi/spi.h> @@ -75,6 +76,10 @@ static unsigned long ttc_dkb_pin_config[] __initdata = { DF_RDY0_DF_RDY0, }; +static struct pxa_gpio_platform_data pxa910_gpio_pdata = { + .irq_base = MMP_GPIO_TO_IRQ(0), +}; + static struct mtd_partition ttc_dkb_onenand_partitions[] = { { .name = "bootloader", @@ -162,13 +167,7 @@ static struct i2c_board_info ttc_dkb_i2c_info[] = { #ifdef CONFIG_USB_SUPPORT #if defined(CONFIG_USB_MV_UDC) || defined(CONFIG_USB_EHCI_MV_U2O) -static char *pxa910_usb_clock_name[] = { - [0] = "U2OCLK", -}; - static struct mv_usb_platform_data ttc_usb_pdata = { - .clknum = 1, - .clkname = pxa910_usb_clock_name, .vbus = NULL, .mode = MV_USB_MODE_OTG, .otg_force_a_bus_req = 1, @@ -284,6 +283,8 @@ static void __init ttc_dkb_init(void) /* off-chip devices */ pxa910_add_twsi(0, NULL, ARRAY_AND_SIZE(ttc_dkb_i2c_info)); + platform_device_add_data(&pxa910_device_gpio, &pxa910_gpio_pdata, + sizeof(struct pxa_gpio_platform_data)); platform_add_devices(ARRAY_AND_SIZE(ttc_dkb_devices)); #ifdef CONFIG_USB_MV_UDC diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig index b61908594b47..fceb093b9494 100644 --- a/arch/arm/mach-msm/Kconfig +++ b/arch/arm/mach-msm/Kconfig @@ -44,10 +44,10 @@ endchoice config ARCH_MSM8X60 bool "MSM8X60" - select ARCH_MSM_SCORPIONMP select ARM_GIC select CPU_V7 select GPIO_MSM_V2 + select HAVE_SMP select MSM_GPIOMUX select MSM_SCM if SMP select MSM_V2_TLMM @@ -55,9 +55,9 @@ config ARCH_MSM8X60 config ARCH_MSM8960 bool "MSM8960" - select ARCH_MSM_SCORPIONMP select ARM_GIC select CPU_V7 + select HAVE_SMP select MSM_GPIOMUX select MSM_SCM if SMP select MSM_V2_TLMM @@ -68,9 +68,6 @@ config MSM_HAS_DEBUG_UART_HS config MSM_SOC_REV_A bool -config ARCH_MSM_SCORPIONMP - bool - select HAVE_SMP config ARCH_MSM_ARM11 bool diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c index 84d720af34ab..82eaf88d2026 100644 --- a/arch/arm/mach-msm/board-halibut.c +++ b/arch/arm/mach-msm/board-halibut.c @@ -59,6 +59,7 @@ static struct platform_device smc91x_device = { }; static struct platform_device *devices[] __initdata = { + &msm_device_gpio_7201, &msm_device_uart3, &msm_device_smd, &msm_device_nand, diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c index 7bc3f82e3ec9..520c141acd03 100644 --- a/arch/arm/mach-msm/board-msm7x30.c +++ b/arch/arm/mach-msm/board-msm7x30.c @@ -89,6 +89,7 @@ struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = { }; static struct platform_device *devices[] __initdata = { + &msm_device_gpio_7x30, #if defined(CONFIG_SERIAL_MSM) || defined(CONFIG_MSM_SERIAL_DEBUGGER) &msm_device_uart2, #endif diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c index 686e7949a73a..38a532d6937c 100644 --- a/arch/arm/mach-msm/board-qsd8x50.c +++ b/arch/arm/mach-msm/board-qsd8x50.c @@ -89,6 +89,7 @@ static struct msm_otg_platform_data msm_otg_pdata = { }; static struct platform_device *devices[] __initdata = { + &msm_device_gpio_8x50, &msm_device_uart3, &msm_device_smd, &msm_device_otg, diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c index 919bfa32871a..80fe1c5ff5c1 100644 --- a/arch/arm/mach-msm/board-trout.c +++ b/arch/arm/mach-msm/board-trout.c @@ -36,6 +36,7 @@ extern int trout_init_mmc(unsigned int); static struct platform_device *devices[] __initdata = { + &msm_device_gpio_7201, &msm_device_uart3, &msm_device_smd, &msm_device_nand, diff --git a/arch/arm/mach-msm/devices-msm7x00.c b/arch/arm/mach-msm/devices-msm7x00.c index f66ee6ea8720..1a0a2306b115 100644 --- a/arch/arm/mach-msm/devices-msm7x00.c +++ b/arch/arm/mach-msm/devices-msm7x00.c @@ -29,6 +29,37 @@ #include "clock-pcom.h" #include <linux/platform_data/mmc-msm_sdcc.h> +static struct resource msm_gpio_resources[] = { + { + .start = 32 + 0, + .end = 32 + 0, + .flags = IORESOURCE_IRQ, + }, + { + .start = 32 + 1, + .end = 32 + 1, + .flags = IORESOURCE_IRQ, + }, + { + .start = 0xa9200800, + .end = 0xa9200800 + SZ_4K - 1, + .flags = IORESOURCE_MEM, + .name = "gpio1" + }, + { + .start = 0xa9300C00, + .end = 0xa9300C00 + SZ_4K - 1, + .flags = IORESOURCE_MEM, + .name = "gpio2" + }, +}; + +struct platform_device msm_device_gpio_7201 = { + .name = "gpio-msm-7201", + .num_resources = ARRAY_SIZE(msm_gpio_resources), + .resource = msm_gpio_resources, +}; + static struct resource resources_uart1[] = { { .start = INT_UART1, diff --git a/arch/arm/mach-msm/devices-msm7x30.c b/arch/arm/mach-msm/devices-msm7x30.c index e90ab5938c5f..12f482c07740 100644 --- a/arch/arm/mach-msm/devices-msm7x30.c +++ b/arch/arm/mach-msm/devices-msm7x30.c @@ -33,6 +33,37 @@ #include <linux/platform_data/mmc-msm_sdcc.h> +static struct resource msm_gpio_resources[] = { + { + .start = 32 + 18, + .end = 32 + 18, + .flags = IORESOURCE_IRQ, + }, + { + .start = 32 + 19, + .end = 32 + 19, + .flags = IORESOURCE_IRQ, + }, + { + .start = 0xac001000, + .end = 0xac001000 + SZ_4K - 1, + .flags = IORESOURCE_MEM, + .name = "gpio1" + }, + { + .start = 0xac101400, + .end = 0xac101400 + SZ_4K - 1, + .flags = IORESOURCE_MEM, + .name = "gpio2" + }, +}; + +struct platform_device msm_device_gpio_7x30 = { + .name = "gpio-msm-7x30", + .num_resources = ARRAY_SIZE(msm_gpio_resources), + .resource = msm_gpio_resources, +}; + static struct resource resources_uart2[] = { { .start = INT_UART2, diff --git a/arch/arm/mach-msm/devices-qsd8x50.c b/arch/arm/mach-msm/devices-qsd8x50.c index 4db61d5fe317..2e1b3ec9dfc7 100644 --- a/arch/arm/mach-msm/devices-qsd8x50.c +++ b/arch/arm/mach-msm/devices-qsd8x50.c @@ -30,6 +30,37 @@ #include <linux/platform_data/mmc-msm_sdcc.h> #include "clock-pcom.h" +static struct resource msm_gpio_resources[] = { + { + .start = 64 + 165 + 9, + .end = 64 + 165 + 9, + .flags = IORESOURCE_IRQ, + }, + { + .start = 64 + 165 + 10, + .end = 64 + 165 + 10, + .flags = IORESOURCE_IRQ, + }, + { + .start = 0xa9000800, + .end = 0xa9000800 + SZ_4K - 1, + .flags = IORESOURCE_MEM, + .name = "gpio1" + }, + { + .start = 0xa9100C00, + .end = 0xa9100C00 + SZ_4K - 1, + .flags = IORESOURCE_MEM, + .name = "gpio2" + }, +}; + +struct platform_device msm_device_gpio_8x50 = { + .name = "gpio-msm-8x50", + .num_resources = ARRAY_SIZE(msm_gpio_resources), + .resource = msm_gpio_resources, +}; + static struct resource resources_uart3[] = { { .start = INT_UART3, diff --git a/arch/arm/mach-msm/devices.h b/arch/arm/mach-msm/devices.h index 9545c196c6e8..da902cf51161 100644 --- a/arch/arm/mach-msm/devices.h +++ b/arch/arm/mach-msm/devices.h @@ -20,6 +20,10 @@ #include "clock.h" +extern struct platform_device msm_device_gpio_7201; +extern struct platform_device msm_device_gpio_7x30; +extern struct platform_device msm_device_gpio_8x50; + extern struct platform_device msm_device_uart1; extern struct platform_device msm_device_uart2; extern struct platform_device msm_device_uart3; diff --git a/arch/arm/mach-msm/dma.c b/arch/arm/mach-msm/dma.c index 354b91d4c3ac..b279fd8a31b1 100644 --- a/arch/arm/mach-msm/dma.c +++ b/arch/arm/mach-msm/dma.c @@ -19,9 +19,35 @@ #include <linux/interrupt.h> #include <linux/completion.h> #include <mach/dma.h> +#include <mach/msm_iomap.h> #define MSM_DMOV_CHANNEL_COUNT 16 +#define DMOV_SD0(off, ch) (MSM_DMOV_BASE + 0x0000 + (off) + ((ch) << 2)) +#define DMOV_SD1(off, ch) (MSM_DMOV_BASE + 0x0400 + (off) + ((ch) << 2)) +#define DMOV_SD2(off, ch) (MSM_DMOV_BASE + 0x0800 + (off) + ((ch) << 2)) +#define DMOV_SD3(off, ch) (MSM_DMOV_BASE + 0x0C00 + (off) + ((ch) << 2)) + +#if defined(CONFIG_ARCH_MSM7X30) +#define DMOV_SD_AARM DMOV_SD2 +#else +#define DMOV_SD_AARM DMOV_SD3 +#endif + +#define DMOV_CMD_PTR(ch) DMOV_SD_AARM(0x000, ch) +#define DMOV_RSLT(ch) DMOV_SD_AARM(0x040, ch) +#define DMOV_FLUSH0(ch) DMOV_SD_AARM(0x080, ch) +#define DMOV_FLUSH1(ch) DMOV_SD_AARM(0x0C0, ch) +#define DMOV_FLUSH2(ch) DMOV_SD_AARM(0x100, ch) +#define DMOV_FLUSH3(ch) DMOV_SD_AARM(0x140, ch) +#define DMOV_FLUSH4(ch) DMOV_SD_AARM(0x180, ch) +#define DMOV_FLUSH5(ch) DMOV_SD_AARM(0x1C0, ch) + +#define DMOV_STATUS(ch) DMOV_SD_AARM(0x200, ch) +#define DMOV_ISR DMOV_SD_AARM(0x380, 0) + +#define DMOV_CONFIG(ch) DMOV_SD_AARM(0x300, ch) + enum { MSM_DMOV_PRINT_ERRORS = 1, MSM_DMOV_PRINT_IO = 2, diff --git a/arch/arm/mach-msm/hotplug.c b/arch/arm/mach-msm/hotplug.c index 750446feb444..326a87261f9a 100644 --- a/arch/arm/mach-msm/hotplug.c +++ b/arch/arm/mach-msm/hotplug.c @@ -10,16 +10,12 @@ #include <linux/errno.h> #include <linux/smp.h> -#include <asm/cacheflush.h> #include <asm/smp_plat.h> #include "common.h" static inline void cpu_enter_lowpower(void) { - /* Just flush the cache. Changing the coherency is not yet - * available on msm. */ - flush_cache_all(); } static inline void cpu_leave_lowpower(void) diff --git a/arch/arm/mach-msm/include/mach/cpu.h b/arch/arm/mach-msm/include/mach/cpu.h deleted file mode 100644 index a9481b08d5c7..000000000000 --- a/arch/arm/mach-msm/include/mach/cpu.h +++ /dev/null @@ -1,54 +0,0 @@ -/* Copyright (c) 2011, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - */ - -#ifndef __ARCH_ARM_MACH_MSM_CPU_H__ -#define __ARCH_ARM_MACH_MSM_CPU_H__ - -/* TODO: For now, only one CPU can be compiled at a time. */ - -#define cpu_is_msm7x01() 0 -#define cpu_is_msm7x30() 0 -#define cpu_is_qsd8x50() 0 -#define cpu_is_msm8x60() 0 -#define cpu_is_msm8960() 0 - -#ifdef CONFIG_ARCH_MSM7X00A -# undef cpu_is_msm7x01 -# define cpu_is_msm7x01() 1 -#endif - -#ifdef CONFIG_ARCH_MSM7X30 -# undef cpu_is_msm7x30 -# define cpu_is_msm7x30() 1 -#endif - -#ifdef CONFIG_ARCH_QSD8X50 -# undef cpu_is_qsd8x50 -# define cpu_is_qsd8x50() 1 -#endif - -#ifdef CONFIG_ARCH_MSM8X60 -# undef cpu_is_msm8x60 -# define cpu_is_msm8x60() 1 -#endif - -#ifdef CONFIG_ARCH_MSM8960 -# undef cpu_is_msm8960 -# define cpu_is_msm8960() 1 -#endif - -#endif diff --git a/arch/arm/mach-msm/include/mach/dma.h b/arch/arm/mach-msm/include/mach/dma.h index 05583f569524..a72d48d42342 100644 --- a/arch/arm/mach-msm/include/mach/dma.h +++ b/arch/arm/mach-msm/include/mach/dma.h @@ -16,7 +16,6 @@ #ifndef __ASM_ARCH_MSM_DMA_H #include <linux/list.h> -#include <mach/msm_iomap.h> struct msm_dmov_errdata { uint32_t flush[6]; @@ -45,48 +44,23 @@ static inline int msm_dmov_exec_cmd(unsigned id, unsigned int cmdptr) { return -EIO; } #endif - -#define DMOV_SD0(off, ch) (MSM_DMOV_BASE + 0x0000 + (off) + ((ch) << 2)) -#define DMOV_SD1(off, ch) (MSM_DMOV_BASE + 0x0400 + (off) + ((ch) << 2)) -#define DMOV_SD2(off, ch) (MSM_DMOV_BASE + 0x0800 + (off) + ((ch) << 2)) -#define DMOV_SD3(off, ch) (MSM_DMOV_BASE + 0x0C00 + (off) + ((ch) << 2)) - -#if defined(CONFIG_ARCH_MSM7X30) -#define DMOV_SD_AARM DMOV_SD2 -#else -#define DMOV_SD_AARM DMOV_SD3 -#endif - -#define DMOV_CMD_PTR(ch) DMOV_SD_AARM(0x000, ch) #define DMOV_CMD_LIST (0 << 29) /* does not work */ #define DMOV_CMD_PTR_LIST (1 << 29) /* works */ #define DMOV_CMD_INPUT_CFG (2 << 29) /* untested */ #define DMOV_CMD_OUTPUT_CFG (3 << 29) /* untested */ #define DMOV_CMD_ADDR(addr) ((addr) >> 3) -#define DMOV_RSLT(ch) DMOV_SD_AARM(0x040, ch) #define DMOV_RSLT_VALID (1 << 31) /* 0 == host has empties result fifo */ #define DMOV_RSLT_ERROR (1 << 3) #define DMOV_RSLT_FLUSH (1 << 2) #define DMOV_RSLT_DONE (1 << 1) /* top pointer done */ #define DMOV_RSLT_USER (1 << 0) /* command with FR force result */ -#define DMOV_FLUSH0(ch) DMOV_SD_AARM(0x080, ch) -#define DMOV_FLUSH1(ch) DMOV_SD_AARM(0x0C0, ch) -#define DMOV_FLUSH2(ch) DMOV_SD_AARM(0x100, ch) -#define DMOV_FLUSH3(ch) DMOV_SD_AARM(0x140, ch) -#define DMOV_FLUSH4(ch) DMOV_SD_AARM(0x180, ch) -#define DMOV_FLUSH5(ch) DMOV_SD_AARM(0x1C0, ch) - -#define DMOV_STATUS(ch) DMOV_SD_AARM(0x200, ch) #define DMOV_STATUS_RSLT_COUNT(n) (((n) >> 29)) #define DMOV_STATUS_CMD_COUNT(n) (((n) >> 27) & 3) #define DMOV_STATUS_RSLT_VALID (1 << 1) #define DMOV_STATUS_CMD_PTR_RDY (1 << 0) -#define DMOV_ISR DMOV_SD_AARM(0x380, 0) - -#define DMOV_CONFIG(ch) DMOV_SD_AARM(0x300, ch) #define DMOV_CONFIG_FORCE_TOP_PTR_RSLT (1 << 2) #define DMOV_CONFIG_FORCE_FLUSH_RSLT (1 << 1) #define DMOV_CONFIG_IRQ_EN (1 << 0) diff --git a/arch/arm/mach-msm/include/mach/uncompress.h b/arch/arm/mach-msm/include/mach/uncompress.h index fa97a10d8695..94324870fb04 100644 --- a/arch/arm/mach-msm/include/mach/uncompress.h +++ b/arch/arm/mach-msm/include/mach/uncompress.h @@ -37,7 +37,7 @@ static void putc(int c) * Wait for TX_READY to be set; but skip it if we have a * TX underrun. */ - if (UART_DM_SR & 0x08) + if (!(UART_DM_SR & 0x08)) while (!(UART_DM_ISR & 0x80)) cpu_relax(); diff --git a/arch/arm/mach-msm/last_radio_log.c b/arch/arm/mach-msm/last_radio_log.c index 1e243f46a969..9c392a29fc7e 100644 --- a/arch/arm/mach-msm/last_radio_log.c +++ b/arch/arm/mach-msm/last_radio_log.c @@ -31,20 +31,8 @@ extern void *smem_item(unsigned id, unsigned *size); static ssize_t last_radio_log_read(struct file *file, char __user *buf, size_t len, loff_t *offset) { - loff_t pos = *offset; - ssize_t count; - - if (pos >= radio_log_size) - return 0; - - count = min(len, (size_t)(radio_log_size - pos)); - if (copy_to_user(buf, radio_log_base + pos, count)) { - pr_err("%s: copy to user failed\n", __func__); - return -EFAULT; - } - - *offset += count; - return count; + return simple_read_from_buffer(buf, len, offset, + radio_log_base, radio_log_size); } static struct file_operations last_radio_log_fops = { @@ -67,7 +55,8 @@ void msm_init_last_radio_log(struct module *owner) return; } - entry = create_proc_entry("last_radio_log", S_IFREG | S_IRUGO, NULL); + entry = proc_create("last_radio_log", S_IRUGO, NULL, + &last_radio_log_fops); if (!entry) { pr_err("%s: could not create proc entry for radio log\n", __func__); @@ -77,7 +66,6 @@ void msm_init_last_radio_log(struct module *owner) pr_err("%s: last radio log is %d bytes long\n", __func__, radio_log_size); last_radio_log_fops.owner = owner; - entry->proc_fops = &last_radio_log_fops; - entry->size = radio_log_size; + proc_set_size(entry, radio_log_size); } EXPORT_SYMBOL(msm_init_last_radio_log); diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c index 42932865416a..00cdb0a5dac8 100644 --- a/arch/arm/mach-msm/platsmp.c +++ b/arch/arm/mach-msm/platsmp.c @@ -15,7 +15,6 @@ #include <linux/jiffies.h> #include <linux/smp.h> #include <linux/io.h> -#include <linux/irqchip/arm-gic.h> #include <asm/cacheflush.h> #include <asm/cputype.h> @@ -42,13 +41,6 @@ static inline int get_core_count(void) static void __cpuinit msm_secondary_init(unsigned int cpu) { /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); - - /* * let the primary processor know we're out of the * pen, then head off into the C entry point */ diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c index f9fd77e8f1f5..284313f3e02c 100644 --- a/arch/arm/mach-msm/timer.c +++ b/arch/arm/mach-msm/timer.c @@ -30,19 +30,22 @@ #include "common.h" -#define TIMER_MATCH_VAL 0x0000 -#define TIMER_COUNT_VAL 0x0004 -#define TIMER_ENABLE 0x0008 -#define TIMER_ENABLE_CLR_ON_MATCH_EN BIT(1) -#define TIMER_ENABLE_EN BIT(0) -#define TIMER_CLEAR 0x000C -#define DGT_CLK_CTL_DIV_4 0x3 +#define TIMER_MATCH_VAL 0x0000 +#define TIMER_COUNT_VAL 0x0004 +#define TIMER_ENABLE 0x0008 +#define TIMER_ENABLE_CLR_ON_MATCH_EN BIT(1) +#define TIMER_ENABLE_EN BIT(0) +#define TIMER_CLEAR 0x000C +#define DGT_CLK_CTL 0x10 +#define DGT_CLK_CTL_DIV_4 0x3 +#define TIMER_STS_GPT0_CLR_PEND BIT(10) #define GPT_HZ 32768 #define MSM_DGT_SHIFT 5 static void __iomem *event_base; +static void __iomem *sts_base; static irqreturn_t msm_timer_interrupt(int irq, void *dev_id) { @@ -67,6 +70,11 @@ static int msm_timer_set_next_event(unsigned long cycles, writel_relaxed(ctrl, event_base + TIMER_CLEAR); writel_relaxed(cycles, event_base + TIMER_MATCH_VAL); + + if (sts_base) + while (readl_relaxed(sts_base) & TIMER_STS_GPT0_CLR_PEND) + cpu_relax(); + writel_relaxed(ctrl | TIMER_ENABLE_EN, event_base + TIMER_ENABLE); return 0; } @@ -137,9 +145,6 @@ static int __cpuinit msm_local_timer_setup(struct clock_event_device *evt) if (!smp_processor_id()) return 0; - writel_relaxed(0, event_base + TIMER_ENABLE); - writel_relaxed(0, event_base + TIMER_CLEAR); - writel_relaxed(~0, event_base + TIMER_MATCH_VAL); evt->irq = msm_clockevent.irq; evt->name = "local_timer"; evt->features = msm_clockevent.features; @@ -177,9 +182,6 @@ static void __init msm_timer_init(u32 dgt_hz, int sched_bits, int irq, struct clocksource *cs = &msm_clocksource; int res; - writel_relaxed(0, event_base + TIMER_ENABLE); - writel_relaxed(0, event_base + TIMER_CLEAR); - writel_relaxed(~0, event_base + TIMER_MATCH_VAL); ce->cpumask = cpumask_of(0); ce->irq = irq; @@ -217,13 +219,9 @@ err: } #ifdef CONFIG_OF -static const struct of_device_id msm_dgt_match[] __initconst = { - { .compatible = "qcom,msm-dgt" }, - { }, -}; - -static const struct of_device_id msm_gpt_match[] __initconst = { - { .compatible = "qcom,msm-gpt" }, +static const struct of_device_id msm_timer_match[] __initconst = { + { .compatible = "qcom,kpss-timer" }, + { .compatible = "qcom,scss-timer" }, { }, }; @@ -234,33 +232,29 @@ void __init msm_dt_timer_init(void) int irq; struct resource res; u32 percpu_offset; - void __iomem *dgt_clk_ctl; + void __iomem *base; + void __iomem *cpu0_base; - np = of_find_matching_node(NULL, msm_gpt_match); + np = of_find_matching_node(NULL, msm_timer_match); if (!np) { - pr_err("Can't find GPT DT node\n"); + pr_err("Can't find msm timer DT node\n"); return; } - event_base = of_iomap(np, 0); - if (!event_base) { + base = of_iomap(np, 0); + if (!base) { pr_err("Failed to map event base\n"); return; } - irq = irq_of_parse_and_map(np, 0); + /* We use GPT0 for the clockevent */ + irq = irq_of_parse_and_map(np, 1); if (irq <= 0) { pr_err("Can't get irq\n"); return; } - of_node_put(np); - - np = of_find_matching_node(NULL, msm_dgt_match); - if (!np) { - pr_err("Can't find DGT DT node\n"); - return; - } + /* We use CPU0's DGT for the clocksource */ if (of_property_read_u32(np, "cpu-offset", &percpu_offset)) percpu_offset = 0; @@ -269,45 +263,43 @@ void __init msm_dt_timer_init(void) return; } - source_base = ioremap(res.start + percpu_offset, resource_size(&res)); - if (!source_base) { + cpu0_base = ioremap(res.start + percpu_offset, resource_size(&res)); + if (!cpu0_base) { pr_err("Failed to map source base\n"); return; } - if (!of_address_to_resource(np, 1, &res)) { - dgt_clk_ctl = ioremap(res.start + percpu_offset, - resource_size(&res)); - if (!dgt_clk_ctl) { - pr_err("Failed to map DGT control base\n"); - return; - } - writel_relaxed(DGT_CLK_CTL_DIV_4, dgt_clk_ctl); - iounmap(dgt_clk_ctl); - } - if (of_property_read_u32(np, "clock-frequency", &freq)) { pr_err("Unknown frequency\n"); return; } of_node_put(np); + event_base = base + 0x4; + sts_base = base + 0x88; + source_base = cpu0_base + 0x24; + freq /= 4; + writel_relaxed(DGT_CLK_CTL_DIV_4, source_base + DGT_CLK_CTL); + msm_timer_init(freq, 32, irq, !!percpu_offset); } #endif -static int __init msm_timer_map(phys_addr_t event, phys_addr_t source) +static int __init msm_timer_map(phys_addr_t addr, u32 event, u32 source, + u32 sts) { - event_base = ioremap(event, SZ_64); - if (!event_base) { - pr_err("Failed to map event base\n"); - return 1; - } - source_base = ioremap(source, SZ_64); - if (!source_base) { - pr_err("Failed to map source base\n"); - return 1; + void __iomem *base; + + base = ioremap(addr, SZ_256); + if (!base) { + pr_err("Failed to map timer base\n"); + return -ENOMEM; } + event_base = base + event; + source_base = base + source; + if (sts) + sts_base = base + sts; + return 0; } @@ -315,7 +307,7 @@ void __init msm7x01_timer_init(void) { struct clocksource *cs = &msm_clocksource; - if (msm_timer_map(0xc0100000, 0xc0100010)) + if (msm_timer_map(0xc0100000, 0x0, 0x10, 0x0)) return; cs->read = msm_read_timer_count_shift; cs->mask = CLOCKSOURCE_MASK((32 - MSM_DGT_SHIFT)); @@ -326,14 +318,14 @@ void __init msm7x01_timer_init(void) void __init msm7x30_timer_init(void) { - if (msm_timer_map(0xc0100004, 0xc0100024)) + if (msm_timer_map(0xc0100000, 0x4, 0x24, 0x80)) return; msm_timer_init(24576000 / 4, 32, 1, false); } void __init qsd8x50_timer_init(void) { - if (msm_timer_map(0xAC100000, 0xAC100010)) + if (msm_timer_map(0xAC100000, 0x0, 0x10, 0x34)) return; msm_timer_init(19200000 / 4, 32, 7, false); } diff --git a/arch/arm/mach-mv78xx0/Makefile b/arch/arm/mach-mv78xx0/Makefile index 67a13f9bfe64..7cd04634d302 100644 --- a/arch/arm/mach-mv78xx0/Makefile +++ b/arch/arm/mach-mv78xx0/Makefile @@ -1,4 +1,4 @@ -obj-y += common.o addr-map.o mpp.o irq.o pcie.o +obj-y += common.o mpp.o irq.o pcie.o obj-$(CONFIG_MACH_DB78X00_BP) += db78x00-bp-setup.o obj-$(CONFIG_MACH_RD78X00_MASA) += rd78x00-masa-setup.o obj-$(CONFIG_MACH_TERASTATION_WXL) += buffalo-wxl-setup.o diff --git a/arch/arm/mach-mv78xx0/addr-map.c b/arch/arm/mach-mv78xx0/addr-map.c deleted file mode 100644 index 26e9876b50e9..000000000000 --- a/arch/arm/mach-mv78xx0/addr-map.c +++ /dev/null @@ -1,93 +0,0 @@ -/* - * arch/arm/mach-mv78xx0/addr-map.c - * - * Address map functions for Marvell MV78xx0 SoCs - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/mbus.h> -#include <linux/io.h> -#include <plat/addr-map.h> -#include <mach/mv78xx0.h> -#include "common.h" - -/* - * Generic Address Decode Windows bit settings - */ -#define TARGET_DEV_BUS 1 -#define TARGET_PCIE0 4 -#define TARGET_PCIE1 8 -#define TARGET_PCIE(i) ((i) ? TARGET_PCIE1 : TARGET_PCIE0) -#define ATTR_DEV_SPI_ROM 0x1f -#define ATTR_DEV_BOOT 0x2f -#define ATTR_DEV_CS3 0x37 -#define ATTR_DEV_CS2 0x3b -#define ATTR_DEV_CS1 0x3d -#define ATTR_DEV_CS0 0x3e -#define ATTR_PCIE_IO(l) (0xf0 & ~(0x10 << (l))) -#define ATTR_PCIE_MEM(l) (0xf8 & ~(0x10 << (l))) - -/* - * CPU Address Decode Windows registers - */ -#define WIN0_OFF(n) (BRIDGE_VIRT_BASE + 0x0000 + ((n) << 4)) -#define WIN8_OFF(n) (BRIDGE_VIRT_BASE + 0x0900 + (((n) - 8) << 4)) - -static void __init __iomem *win_cfg_base(const struct orion_addr_map_cfg *cfg, int win) -{ - /* - * Find the control register base address for this window. - * - * BRIDGE_VIRT_BASE points to the right (CPU0's or CPU1's) - * MBUS bridge depending on which CPU core we're running on, - * so we don't need to take that into account here. - */ - - return (win < 8) ? WIN0_OFF(win) : WIN8_OFF(win); -} - -/* - * Description of the windows needed by the platform code - */ -static struct orion_addr_map_cfg addr_map_cfg __initdata = { - .num_wins = 14, - .remappable_wins = 8, - .win_cfg_base = win_cfg_base, -}; - -void __init mv78xx0_setup_cpu_mbus(void) -{ - /* - * Disable, clear and configure windows. - */ - orion_config_wins(&addr_map_cfg, NULL); - - /* - * Setup MBUS dram target info. - */ - if (mv78xx0_core_index() == 0) - orion_setup_cpu_mbus_target(&addr_map_cfg, - (void __iomem *) DDR_WINDOW_CPU0_BASE); - else - orion_setup_cpu_mbus_target(&addr_map_cfg, - (void __iomem *) DDR_WINDOW_CPU1_BASE); -} - -void __init mv78xx0_setup_pcie_io_win(int window, u32 base, u32 size, - int maj, int min) -{ - orion_setup_cpu_win(&addr_map_cfg, window, base, size, - TARGET_PCIE(maj), ATTR_PCIE_IO(min), 0); -} - -void __init mv78xx0_setup_pcie_mem_win(int window, u32 base, u32 size, - int maj, int min) -{ - orion_setup_cpu_win(&addr_map_cfg, window, base, size, - TARGET_PCIE(maj), ATTR_PCIE_MEM(min), -1); -} diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c index 0efa14498ebc..749a7f8c4992 100644 --- a/arch/arm/mach-mv78xx0/common.c +++ b/arch/arm/mach-mv78xx0/common.c @@ -334,6 +334,14 @@ void __init mv78xx0_uart3_init(void) void __init mv78xx0_init_early(void) { orion_time_set_base(TIMER_VIRT_BASE); + if (mv78xx0_core_index() == 0) + mvebu_mbus_init("marvell,mv78xx0-mbus", + BRIDGE_WINS_CPU0_BASE, BRIDGE_WINS_SZ, + DDR_WINDOW_CPU0_BASE, DDR_WINDOW_CPU_SZ); + else + mvebu_mbus_init("marvell,mv78xx0-mbus", + BRIDGE_WINS_CPU1_BASE, BRIDGE_WINS_SZ, + DDR_WINDOW_CPU1_BASE, DDR_WINDOW_CPU_SZ); } void __init_refok mv78xx0_timer_init(void) @@ -397,8 +405,6 @@ void __init mv78xx0_init(void) printk("HCLK = %dMHz, ", (hclk + 499999) / 1000000); printk("TCLK = %dMHz\n", (get_tclk() + 499999) / 1000000); - mv78xx0_setup_cpu_mbus(); - #ifdef CONFIG_CACHE_FEROCEON_L2 feroceon_l2_init(is_l2_writethrough()); #endif diff --git a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h index 46200a183cf2..723748d8ba7d 100644 --- a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h +++ b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h @@ -60,13 +60,18 @@ */ #define BRIDGE_VIRT_BASE (MV78XX0_CORE_REGS_VIRT_BASE) #define BRIDGE_PHYS_BASE (MV78XX0_CORE_REGS_PHYS_BASE) +#define BRIDGE_WINS_CPU0_BASE (MV78XX0_CORE0_REGS_PHYS_BASE) +#define BRIDGE_WINS_CPU1_BASE (MV78XX0_CORE1_REGS_PHYS_BASE) +#define BRIDGE_WINS_SZ (0xA000) /* * Register Map */ #define DDR_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x00000) -#define DDR_WINDOW_CPU0_BASE (DDR_VIRT_BASE + 0x1500) -#define DDR_WINDOW_CPU1_BASE (DDR_VIRT_BASE + 0x1570) +#define DDR_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x00000) +#define DDR_WINDOW_CPU0_BASE (DDR_PHYS_BASE + 0x1500) +#define DDR_WINDOW_CPU1_BASE (DDR_PHYS_BASE + 0x1570) +#define DDR_WINDOW_CPU_SZ (0x20) #define DEV_BUS_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x10000) #define DEV_BUS_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x10000) diff --git a/arch/arm/mach-mv78xx0/pcie.c b/arch/arm/mach-mv78xx0/pcie.c index ee8c0b51df2c..dc26a654c496 100644 --- a/arch/arm/mach-mv78xx0/pcie.c +++ b/arch/arm/mach-mv78xx0/pcie.c @@ -10,11 +10,11 @@ #include <linux/kernel.h> #include <linux/pci.h> +#include <linux/mbus.h> #include <video/vga.h> #include <asm/irq.h> #include <asm/mach/pci.h> #include <plat/pcie.h> -#include <plat/addr-map.h> #include <mach/mv78xx0.h> #include "common.h" @@ -54,7 +54,6 @@ static void __init mv78xx0_pcie_preinit(void) int i; u32 size_each; u32 start; - int win = 0; pcie_io_space.name = "PCIe I/O Space"; pcie_io_space.start = MV78XX0_PCIE_IO_PHYS_BASE(0); @@ -72,6 +71,7 @@ static void __init mv78xx0_pcie_preinit(void) start = MV78XX0_PCIE_MEM_PHYS_BASE; for (i = 0; i < num_pcie_ports; i++) { struct pcie_port *pp = pcie_port + i; + char winname[MVEBU_MBUS_MAX_WINNAME_SZ]; snprintf(pp->mem_space_name, sizeof(pp->mem_space_name), "PCIe %d.%d MEM", pp->maj, pp->min); @@ -85,12 +85,17 @@ static void __init mv78xx0_pcie_preinit(void) if (request_resource(&iomem_resource, &pp->res)) panic("can't allocate PCIe MEM sub-space"); - mv78xx0_setup_pcie_mem_win(win + i + 8, pp->res.start, - resource_size(&pp->res), - pp->maj, pp->min); - - mv78xx0_setup_pcie_io_win(win + i, i * SZ_64K, SZ_64K, - pp->maj, pp->min); + snprintf(winname, sizeof(winname), "pcie%d.%d", + pp->maj, pp->min); + + mvebu_mbus_add_window_remap_flags(winname, + pp->res.start, + resource_size(&pp->res), + MVEBU_MBUS_NO_REMAP, + MVEBU_MBUS_PCI_MEM); + mvebu_mbus_add_window_remap_flags(winname, + i * SZ_64K, SZ_64K, + 0, MVEBU_MBUS_PCI_IO); } } diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index 440b13ef1fed..e11acbb0a46d 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -13,6 +13,8 @@ config ARCH_MVEBU select MVEBU_CLK_CORE select MVEBU_CLK_CPU select MVEBU_CLK_GATING + select MVEBU_MBUS + select ZONE_DMA if ARM_LPAE if ARCH_MVEBU diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile index da93bcbc74c1..2d04f0e21870 100644 --- a/arch/arm/mach-mvebu/Makefile +++ b/arch/arm/mach-mvebu/Makefile @@ -5,6 +5,6 @@ AFLAGS_coherency_ll.o := -Wa,-march=armv7-a obj-y += system-controller.o obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o -obj-$(CONFIG_ARCH_MVEBU) += addr-map.o coherency.o coherency_ll.o pmsu.o irq-armada-370-xp.o +obj-$(CONFIG_ARCH_MVEBU) += coherency.o coherency_ll.o pmsu.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o diff --git a/arch/arm/mach-mvebu/addr-map.c b/arch/arm/mach-mvebu/addr-map.c deleted file mode 100644 index ab9b3bd4fef5..000000000000 --- a/arch/arm/mach-mvebu/addr-map.c +++ /dev/null @@ -1,137 +0,0 @@ -/* - * Address map functions for Marvell 370 / XP SoCs - * - * Copyright (C) 2012 Marvell - * - * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/mbus.h> -#include <linux/io.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <plat/addr-map.h> - -/* - * Generic Address Decode Windows bit settings - */ -#define ARMADA_XP_TARGET_DEV_BUS 1 -#define ARMADA_XP_ATTR_DEV_BOOTROM 0x1D -#define ARMADA_XP_TARGET_ETH1 3 -#define ARMADA_XP_TARGET_PCIE_0_2 4 -#define ARMADA_XP_TARGET_ETH0 7 -#define ARMADA_XP_TARGET_PCIE_1_3 8 - -#define ARMADA_370_TARGET_DEV_BUS 1 -#define ARMADA_370_ATTR_DEV_BOOTROM 0x1D -#define ARMADA_370_TARGET_PCIE_0 4 -#define ARMADA_370_TARGET_PCIE_1 8 - -#define ARMADA_WINDOW_8_PLUS_OFFSET 0x90 -#define ARMADA_SDRAM_ADDR_DECODING_OFFSET 0x180 - -static const struct __initdata orion_addr_map_info -armada_xp_addr_map_info[] = { - /* - * Window for the BootROM, needed for SMP on Armada XP - */ - { 0, 0xfff00000, SZ_1M, ARMADA_XP_TARGET_DEV_BUS, - ARMADA_XP_ATTR_DEV_BOOTROM, -1 }, - /* End marker */ - { -1, 0, 0, 0, 0, 0 }, -}; - -static const struct __initdata orion_addr_map_info -armada_370_addr_map_info[] = { - /* End marker */ - { -1, 0, 0, 0, 0, 0 }, -}; - -static struct of_device_id of_addr_decoding_controller_table[] = { - { .compatible = "marvell,armada-addr-decoding-controller" }, - { /* end of list */ }, -}; - -static void __iomem * -armada_cfg_base(const struct orion_addr_map_cfg *cfg, int win) -{ - unsigned int offset; - - /* The register layout is a bit annoying and the below code - * tries to cope with it. - * - At offset 0x0, there are the registers for the first 8 - * windows, with 4 registers of 32 bits per window (ctrl, - * base, remap low, remap high) - * - Then at offset 0x80, there is a hole of 0x10 bytes for - * the internal registers base address and internal units - * sync barrier register. - * - Then at offset 0x90, there the registers for 12 - * windows, with only 2 registers of 32 bits per window - * (ctrl, base). - */ - if (win < 8) - offset = (win << 4); - else - offset = ARMADA_WINDOW_8_PLUS_OFFSET + ((win - 8) << 3); - - return cfg->bridge_virt_base + offset; -} - -static struct __initdata orion_addr_map_cfg addr_map_cfg = { - .num_wins = 20, - .remappable_wins = 8, - .win_cfg_base = armada_cfg_base, -}; - -static int __init armada_setup_cpu_mbus(void) -{ - struct device_node *np; - void __iomem *mbus_unit_addr_decoding_base; - void __iomem *sdram_addr_decoding_base; - - np = of_find_matching_node(NULL, of_addr_decoding_controller_table); - if (!np) - return -ENODEV; - - mbus_unit_addr_decoding_base = of_iomap(np, 0); - BUG_ON(!mbus_unit_addr_decoding_base); - - sdram_addr_decoding_base = - mbus_unit_addr_decoding_base + - ARMADA_SDRAM_ADDR_DECODING_OFFSET; - - addr_map_cfg.bridge_virt_base = mbus_unit_addr_decoding_base; - - if (of_find_compatible_node(NULL, NULL, "marvell,coherency-fabric")) - addr_map_cfg.hw_io_coherency = 1; - - /* - * Disable, clear and configure windows. - */ - if (of_machine_is_compatible("marvell,armadaxp")) - orion_config_wins(&addr_map_cfg, armada_xp_addr_map_info); - else if (of_machine_is_compatible("marvell,armada370")) - orion_config_wins(&addr_map_cfg, armada_370_addr_map_info); - else { - pr_err("Unsupported SoC\n"); - return -EINVAL; - } - - /* - * Setup MBUS dram target info. - */ - orion_setup_cpu_mbus_target(&addr_map_cfg, - sdram_addr_decoding_base); - return 0; -} - -/* Using a early_initcall is needed so that this initialization gets - * done before the SMP initialization, which requires the BootROM to - * be remapped. */ -early_initcall(armada_setup_cpu_mbus); diff --git a/arch/arm/mach-mvebu/armada-370-xp.c b/arch/arm/mach-mvebu/armada-370-xp.c index a5ea616d6d12..42a4cb3087e2 100644 --- a/arch/arm/mach-mvebu/armada-370-xp.c +++ b/arch/arm/mach-mvebu/armada-370-xp.c @@ -19,6 +19,9 @@ #include <linux/time-armada-370-xp.h> #include <linux/clk/mvebu.h> #include <linux/dma-mapping.h> +#include <linux/mbus.h> +#include <linux/irqchip.h> +#include <asm/hardware/cache-l2x0.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/time.h> @@ -48,12 +51,33 @@ void __init armada_370_xp_timer_and_clk_init(void) void __init armada_370_xp_init_early(void) { + char *mbus_soc_name; + /* * Some Armada 370/XP devices allocate their coherent buffers * from atomic context. Increase size of atomic coherent pool * to make sure such the allocations won't fail. */ init_dma_coherent_pool_size(SZ_1M); + + /* + * This initialization will be replaced by a DT-based + * initialization once the mvebu-mbus driver gains DT support. + */ + if (of_machine_is_compatible("marvell,armada370")) + mbus_soc_name = "marvell,armada370-mbus"; + else + mbus_soc_name = "marvell,armadaxp-mbus"; + + mvebu_mbus_init(mbus_soc_name, + ARMADA_370_XP_MBUS_WINS_BASE, + ARMADA_370_XP_MBUS_WINS_SIZE, + ARMADA_370_XP_SDRAM_WINS_BASE, + ARMADA_370_XP_SDRAM_WINS_SIZE); + +#ifdef CONFIG_CACHE_L2X0 + l2x0_of_init(0, ~0UL); +#endif } static void __init armada_370_xp_dt_init(void) @@ -72,8 +96,7 @@ DT_MACHINE_START(ARMADA_XP_DT, "Marvell Armada 370/XP (Device Tree)") .init_machine = armada_370_xp_dt_init, .map_io = armada_370_xp_map_io, .init_early = armada_370_xp_init_early, - .init_irq = armada_370_xp_init_irq, - .handle_irq = armada_370_xp_handle_irq, + .init_irq = irqchip_init, .init_time = armada_370_xp_timer_and_clk_init, .restart = mvebu_restart, .dt_compat = armada_370_xp_dt_compat, diff --git a/arch/arm/mach-mvebu/armada-370-xp.h b/arch/arm/mach-mvebu/armada-370-xp.h index c6a7d74fddfe..2070e1b4f342 100644 --- a/arch/arm/mach-mvebu/armada-370-xp.h +++ b/arch/arm/mach-mvebu/armada-370-xp.h @@ -16,9 +16,15 @@ #define __MACH_ARMADA_370_XP_H #define ARMADA_370_XP_REGS_PHYS_BASE 0xd0000000 -#define ARMADA_370_XP_REGS_VIRT_BASE IOMEM(0xfeb00000) +#define ARMADA_370_XP_REGS_VIRT_BASE IOMEM(0xfec00000) #define ARMADA_370_XP_REGS_SIZE SZ_1M +/* These defines can go away once mvebu-mbus has a DT binding */ +#define ARMADA_370_XP_MBUS_WINS_BASE (ARMADA_370_XP_REGS_PHYS_BASE + 0x20000) +#define ARMADA_370_XP_MBUS_WINS_SIZE 0x100 +#define ARMADA_370_XP_SDRAM_WINS_BASE (ARMADA_370_XP_REGS_PHYS_BASE + 0x20180) +#define ARMADA_370_XP_SDRAM_WINS_SIZE 0x20 + #ifdef CONFIG_SMP #include <linux/cpumask.h> diff --git a/arch/arm/mach-mvebu/irq-armada-370-xp.c b/arch/arm/mach-mvebu/irq-armada-370-xp.c deleted file mode 100644 index d5970f5a1e8d..000000000000 --- a/arch/arm/mach-mvebu/irq-armada-370-xp.c +++ /dev/null @@ -1,292 +0,0 @@ -/* - * Marvell Armada 370 and Armada XP SoC IRQ handling - * - * Copyright (C) 2012 Marvell - * - * Lior Amsalem <alior@marvell.com> - * Gregory CLEMENT <gregory.clement@free-electrons.com> - * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> - * Ben Dooks <ben.dooks@codethink.co.uk> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/interrupt.h> -#include <linux/io.h> -#include <linux/of_address.h> -#include <linux/of_irq.h> -#include <linux/irqdomain.h> -#include <asm/mach/arch.h> -#include <asm/exception.h> -#include <asm/smp_plat.h> -#include <asm/hardware/cache-l2x0.h> - -/* Interrupt Controller Registers Map */ -#define ARMADA_370_XP_INT_SET_MASK_OFFS (0x48) -#define ARMADA_370_XP_INT_CLEAR_MASK_OFFS (0x4C) - -#define ARMADA_370_XP_INT_CONTROL (0x00) -#define ARMADA_370_XP_INT_SET_ENABLE_OFFS (0x30) -#define ARMADA_370_XP_INT_CLEAR_ENABLE_OFFS (0x34) -#define ARMADA_370_XP_INT_SOURCE_CTL(irq) (0x100 + irq*4) - -#define ARMADA_370_XP_CPU_INTACK_OFFS (0x44) - -#define ARMADA_370_XP_SW_TRIG_INT_OFFS (0x4) -#define ARMADA_370_XP_IN_DRBEL_MSK_OFFS (0xc) -#define ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS (0x8) - -#define ARMADA_370_XP_MAX_PER_CPU_IRQS (28) - -#define ARMADA_370_XP_TIMER0_PER_CPU_IRQ (5) - -#define ACTIVE_DOORBELLS (8) - -static DEFINE_RAW_SPINLOCK(irq_controller_lock); - -static void __iomem *per_cpu_int_base; -static void __iomem *main_int_base; -static struct irq_domain *armada_370_xp_mpic_domain; - -/* - * In SMP mode: - * For shared global interrupts, mask/unmask global enable bit - * For CPU interrtups, mask/unmask the calling CPU's bit - */ -static void armada_370_xp_irq_mask(struct irq_data *d) -{ - irq_hw_number_t hwirq = irqd_to_hwirq(d); - - if (hwirq != ARMADA_370_XP_TIMER0_PER_CPU_IRQ) - writel(hwirq, main_int_base + - ARMADA_370_XP_INT_CLEAR_ENABLE_OFFS); - else - writel(hwirq, per_cpu_int_base + - ARMADA_370_XP_INT_SET_MASK_OFFS); -} - -static void armada_370_xp_irq_unmask(struct irq_data *d) -{ - irq_hw_number_t hwirq = irqd_to_hwirq(d); - - if (hwirq != ARMADA_370_XP_TIMER0_PER_CPU_IRQ) - writel(hwirq, main_int_base + - ARMADA_370_XP_INT_SET_ENABLE_OFFS); - else - writel(hwirq, per_cpu_int_base + - ARMADA_370_XP_INT_CLEAR_MASK_OFFS); -} - -#ifdef CONFIG_SMP -static int armada_xp_set_affinity(struct irq_data *d, - const struct cpumask *mask_val, bool force) -{ - unsigned long reg; - unsigned long new_mask = 0; - unsigned long online_mask = 0; - unsigned long count = 0; - irq_hw_number_t hwirq = irqd_to_hwirq(d); - int cpu; - - for_each_cpu(cpu, mask_val) { - new_mask |= 1 << cpu_logical_map(cpu); - count++; - } - - /* - * Forbid mutlicore interrupt affinity - * This is required since the MPIC HW doesn't limit - * several CPUs from acknowledging the same interrupt. - */ - if (count > 1) - return -EINVAL; - - for_each_cpu(cpu, cpu_online_mask) - online_mask |= 1 << cpu_logical_map(cpu); - - raw_spin_lock(&irq_controller_lock); - - reg = readl(main_int_base + ARMADA_370_XP_INT_SOURCE_CTL(hwirq)); - reg = (reg & (~online_mask)) | new_mask; - writel(reg, main_int_base + ARMADA_370_XP_INT_SOURCE_CTL(hwirq)); - - raw_spin_unlock(&irq_controller_lock); - - return 0; -} -#endif - -static struct irq_chip armada_370_xp_irq_chip = { - .name = "armada_370_xp_irq", - .irq_mask = armada_370_xp_irq_mask, - .irq_mask_ack = armada_370_xp_irq_mask, - .irq_unmask = armada_370_xp_irq_unmask, -#ifdef CONFIG_SMP - .irq_set_affinity = armada_xp_set_affinity, -#endif -}; - -static int armada_370_xp_mpic_irq_map(struct irq_domain *h, - unsigned int virq, irq_hw_number_t hw) -{ - armada_370_xp_irq_mask(irq_get_irq_data(virq)); - if (hw != ARMADA_370_XP_TIMER0_PER_CPU_IRQ) - writel(hw, per_cpu_int_base + - ARMADA_370_XP_INT_CLEAR_MASK_OFFS); - else - writel(hw, main_int_base + ARMADA_370_XP_INT_SET_ENABLE_OFFS); - irq_set_status_flags(virq, IRQ_LEVEL); - - if (hw == ARMADA_370_XP_TIMER0_PER_CPU_IRQ) { - irq_set_percpu_devid(virq); - irq_set_chip_and_handler(virq, &armada_370_xp_irq_chip, - handle_percpu_devid_irq); - - } else { - irq_set_chip_and_handler(virq, &armada_370_xp_irq_chip, - handle_level_irq); - } - set_irq_flags(virq, IRQF_VALID | IRQF_PROBE); - - return 0; -} - -#ifdef CONFIG_SMP -void armada_mpic_send_doorbell(const struct cpumask *mask, unsigned int irq) -{ - int cpu; - unsigned long map = 0; - - /* Convert our logical CPU mask into a physical one. */ - for_each_cpu(cpu, mask) - map |= 1 << cpu_logical_map(cpu); - - /* - * Ensure that stores to Normal memory are visible to the - * other CPUs before issuing the IPI. - */ - dsb(); - - /* submit softirq */ - writel((map << 8) | irq, main_int_base + - ARMADA_370_XP_SW_TRIG_INT_OFFS); -} - -void armada_xp_mpic_smp_cpu_init(void) -{ - /* Clear pending IPIs */ - writel(0, per_cpu_int_base + ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS); - - /* Enable first 8 IPIs */ - writel((1 << ACTIVE_DOORBELLS) - 1, per_cpu_int_base + - ARMADA_370_XP_IN_DRBEL_MSK_OFFS); - - /* Unmask IPI interrupt */ - writel(0, per_cpu_int_base + ARMADA_370_XP_INT_CLEAR_MASK_OFFS); -} -#endif /* CONFIG_SMP */ - -static struct irq_domain_ops armada_370_xp_mpic_irq_ops = { - .map = armada_370_xp_mpic_irq_map, - .xlate = irq_domain_xlate_onecell, -}; - -static int __init armada_370_xp_mpic_of_init(struct device_node *node, - struct device_node *parent) -{ - u32 control; - - main_int_base = of_iomap(node, 0); - per_cpu_int_base = of_iomap(node, 1); - - BUG_ON(!main_int_base); - BUG_ON(!per_cpu_int_base); - - control = readl(main_int_base + ARMADA_370_XP_INT_CONTROL); - - armada_370_xp_mpic_domain = - irq_domain_add_linear(node, (control >> 2) & 0x3ff, - &armada_370_xp_mpic_irq_ops, NULL); - - if (!armada_370_xp_mpic_domain) - panic("Unable to add Armada_370_Xp MPIC irq domain (DT)\n"); - - irq_set_default_host(armada_370_xp_mpic_domain); - -#ifdef CONFIG_SMP - armada_xp_mpic_smp_cpu_init(); - - /* - * Set the default affinity from all CPUs to the boot cpu. - * This is required since the MPIC doesn't limit several CPUs - * from acknowledging the same interrupt. - */ - cpumask_clear(irq_default_affinity); - cpumask_set_cpu(smp_processor_id(), irq_default_affinity); - -#endif - - return 0; -} - -asmlinkage void __exception_irq_entry armada_370_xp_handle_irq(struct pt_regs - *regs) -{ - u32 irqstat, irqnr; - - do { - irqstat = readl_relaxed(per_cpu_int_base + - ARMADA_370_XP_CPU_INTACK_OFFS); - irqnr = irqstat & 0x3FF; - - if (irqnr > 1022) - break; - - if (irqnr > 0) { - irqnr = irq_find_mapping(armada_370_xp_mpic_domain, - irqnr); - handle_IRQ(irqnr, regs); - continue; - } -#ifdef CONFIG_SMP - /* IPI Handling */ - if (irqnr == 0) { - u32 ipimask, ipinr; - - ipimask = readl_relaxed(per_cpu_int_base + - ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS) - & 0xFF; - - writel(0x0, per_cpu_int_base + - ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS); - - /* Handle all pending doorbells */ - for (ipinr = 0; ipinr < ACTIVE_DOORBELLS; ipinr++) { - if (ipimask & (0x1 << ipinr)) - handle_IPI(ipinr, regs); - } - continue; - } -#endif - - } while (1); -} - -static const struct of_device_id mpic_of_match[] __initconst = { - {.compatible = "marvell,mpic", .data = armada_370_xp_mpic_of_init}, - {}, -}; - -void __init armada_370_xp_init_irq(void) -{ - of_irq_init(mpic_of_match); -#ifdef CONFIG_CACHE_L2X0 - l2x0_of_init(0, ~0UL); -#endif -} diff --git a/arch/arm/mach-mvebu/platsmp.c b/arch/arm/mach-mvebu/platsmp.c index fe16aaf7c19c..875ea748391c 100644 --- a/arch/arm/mach-mvebu/platsmp.c +++ b/arch/arm/mach-mvebu/platsmp.c @@ -21,6 +21,7 @@ #include <linux/smp.h> #include <linux/clk.h> #include <linux/of.h> +#include <linux/mbus.h> #include <asm/cacheflush.h> #include <asm/smp_plat.h> #include "common.h" @@ -109,6 +110,7 @@ void __init armada_xp_smp_prepare_cpus(unsigned int max_cpus) set_secondary_cpus_clock(); flush_cache_all(); set_cpu_coherent(cpu_logical_map(smp_processor_id()), 0); + mvebu_mbus_add_window("bootrom", 0xfff00000, SZ_1M); } struct smp_operations armada_xp_smp_ops __initdata = { diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index ecc431909d6f..4dc2fbba0ecd 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -1,8 +1,7 @@ -if ARCH_MXS - config SOC_IMX23 bool select ARM_AMBA + select ARM_CPU_SUSPEND if PM select CPU_ARM926T select HAVE_PWM select PINCTRL_IMX23 @@ -10,19 +9,24 @@ config SOC_IMX23 config SOC_IMX28 bool select ARM_AMBA + select ARM_CPU_SUSPEND if PM select CPU_ARM926T select HAVE_CAN_FLEXCAN if CAN select HAVE_PWM select PINCTRL_IMX28 -comment "MXS platforms:" - -config MACH_MXS_DT - bool "Support MXS platforms from device tree" +config ARCH_MXS + bool "Freescale MXS (i.MX23, i.MX28) support" + depends on ARCH_MULTI_V5 + select ARCH_REQUIRE_GPIOLIB + select CLKDEV_LOOKUP + select CLKSRC_MMIO + select CLKSRC_OF + select GENERIC_CLOCKEVENTS + select HAVE_CLK_PREPARE + select PINCTRL select SOC_IMX23 select SOC_IMX28 + select STMP_DEVICE help - Include support for Freescale MXS platforms(i.MX23 and i.MX28) - using the device tree for discovery - -endif + Support for Freescale MXS-based family of processors diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile index 3d3c8a973062..cc2bf6748ade 100644 --- a/arch/arm/mach-mxs/Makefile +++ b/arch/arm/mach-mxs/Makefile @@ -1,6 +1,2 @@ -# Common support -obj-y := icoll.o ocotp.o system.o timer.o mm.o - obj-$(CONFIG_PM) += pm.o - -obj-$(CONFIG_MACH_MXS_DT) += mach-mxs.o +obj-$(CONFIG_ARCH_MXS) += mach-mxs.o diff --git a/arch/arm/mach-mxs/Makefile.boot b/arch/arm/mach-mxs/Makefile.boot deleted file mode 100644 index 07b11fe6453f..000000000000 --- a/arch/arm/mach-mxs/Makefile.boot +++ /dev/null @@ -1 +0,0 @@ -zreladdr-y += 0x40008000 diff --git a/arch/arm/mach-mxs/icoll.c b/arch/arm/mach-mxs/icoll.c deleted file mode 100644 index e26eeba46598..000000000000 --- a/arch/arm/mach-mxs/icoll.c +++ /dev/null @@ -1,125 +0,0 @@ -/* - * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/irqdomain.h> -#include <linux/io.h> -#include <linux/of.h> -#include <linux/of_irq.h> -#include <asm/exception.h> -#include <mach/mxs.h> -#include <mach/common.h> - -#define HW_ICOLL_VECTOR 0x0000 -#define HW_ICOLL_LEVELACK 0x0010 -#define HW_ICOLL_CTRL 0x0020 -#define HW_ICOLL_STAT_OFFSET 0x0070 -#define HW_ICOLL_INTERRUPTn_SET(n) (0x0124 + (n) * 0x10) -#define HW_ICOLL_INTERRUPTn_CLR(n) (0x0128 + (n) * 0x10) -#define BM_ICOLL_INTERRUPTn_ENABLE 0x00000004 -#define BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0 0x1 - -#define ICOLL_NUM_IRQS 128 - -static void __iomem *icoll_base = MXS_IO_ADDRESS(MXS_ICOLL_BASE_ADDR); -static struct irq_domain *icoll_domain; - -static void icoll_ack_irq(struct irq_data *d) -{ - /* - * The Interrupt Collector is able to prioritize irqs. - * Currently only level 0 is used. So acking can use - * BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0 unconditionally. - */ - __raw_writel(BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0, - icoll_base + HW_ICOLL_LEVELACK); -} - -static void icoll_mask_irq(struct irq_data *d) -{ - __raw_writel(BM_ICOLL_INTERRUPTn_ENABLE, - icoll_base + HW_ICOLL_INTERRUPTn_CLR(d->hwirq)); -} - -static void icoll_unmask_irq(struct irq_data *d) -{ - __raw_writel(BM_ICOLL_INTERRUPTn_ENABLE, - icoll_base + HW_ICOLL_INTERRUPTn_SET(d->hwirq)); -} - -static struct irq_chip mxs_icoll_chip = { - .irq_ack = icoll_ack_irq, - .irq_mask = icoll_mask_irq, - .irq_unmask = icoll_unmask_irq, -}; - -asmlinkage void __exception_irq_entry icoll_handle_irq(struct pt_regs *regs) -{ - u32 irqnr; - - do { - irqnr = __raw_readl(icoll_base + HW_ICOLL_STAT_OFFSET); - if (irqnr != 0x7f) { - __raw_writel(irqnr, icoll_base + HW_ICOLL_VECTOR); - irqnr = irq_find_mapping(icoll_domain, irqnr); - handle_IRQ(irqnr, regs); - continue; - } - break; - } while (1); -} - -static int icoll_irq_domain_map(struct irq_domain *d, unsigned int virq, - irq_hw_number_t hw) -{ - irq_set_chip_and_handler(virq, &mxs_icoll_chip, handle_level_irq); - set_irq_flags(virq, IRQF_VALID); - - return 0; -} - -static struct irq_domain_ops icoll_irq_domain_ops = { - .map = icoll_irq_domain_map, - .xlate = irq_domain_xlate_onecell, -}; - -static void __init icoll_of_init(struct device_node *np, - struct device_node *interrupt_parent) -{ - /* - * Interrupt Collector reset, which initializes the priority - * for each irq to level 0. - */ - mxs_reset_block(icoll_base + HW_ICOLL_CTRL); - - icoll_domain = irq_domain_add_linear(np, ICOLL_NUM_IRQS, - &icoll_irq_domain_ops, NULL); - WARN_ON(!icoll_domain); -} - -static const struct of_device_id icoll_of_match[] __initconst = { - {.compatible = "fsl,icoll", .data = icoll_of_init}, - { /* sentinel */ } -}; - -void __init icoll_init_irq(void) -{ - of_irq_init(icoll_of_match); -} diff --git a/arch/arm/mach-mxs/include/mach/common.h b/arch/arm/mach-mxs/include/mach/common.h deleted file mode 100644 index be5a9c93cb2a..000000000000 --- a/arch/arm/mach-mxs/include/mach/common.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __MACH_MXS_COMMON_H__ -#define __MACH_MXS_COMMON_H__ - -extern const u32 *mxs_get_ocotp(void); -extern int mxs_reset_block(void __iomem *); -extern void mxs_timer_init(void); -extern void mxs_restart(char, const char *); -extern int mxs_saif_clkmux_select(unsigned int clkmux); - -extern int mx23_clocks_init(void); -extern void mx23_map_io(void); - -extern int mx28_clocks_init(void); -extern void mx28_map_io(void); - -extern void icoll_init_irq(void); -extern void icoll_handle_irq(struct pt_regs *); - -#endif /* __MACH_MXS_COMMON_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/digctl.h b/arch/arm/mach-mxs/include/mach/digctl.h deleted file mode 100644 index 17964066303f..000000000000 --- a/arch/arm/mach-mxs/include/mach/digctl.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __MACH_DIGCTL_H__ -#define __MACH_DIGCTL_H__ - -/* MXS DIGCTL SAIF CLKMUX */ -#define MXS_DIGCTL_SAIF_CLKMUX_DIRECT 0x0 -#define MXS_DIGCTL_SAIF_CLKMUX_CROSSINPUT 0x1 -#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0 0x2 -#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR1 0x3 - -#define HW_DIGCTL_CTRL 0x0 -#define BP_DIGCTL_CTRL_SAIF_CLKMUX 10 -#define BM_DIGCTL_CTRL_SAIF_CLKMUX (0x3 << 10) -#define HW_DIGCTL_CHIPID 0x310 -#endif diff --git a/arch/arm/mach-mxs/include/mach/hardware.h b/arch/arm/mach-mxs/include/mach/hardware.h deleted file mode 100644 index 4c0e8a64d8c7..000000000000 --- a/arch/arm/mach-mxs/include/mach/hardware.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __MACH_MXS_HARDWARE_H__ -#define __MACH_MXS_HARDWARE_H__ - -#endif /* __MACH_MXS_HARDWARE_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/mx23.h b/arch/arm/mach-mxs/include/mach/mx23.h deleted file mode 100644 index 599094bc99de..000000000000 --- a/arch/arm/mach-mxs/include/mach/mx23.h +++ /dev/null @@ -1,169 +0,0 @@ -/* - * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#ifndef __MACH_MX23_H__ -#define __MACH_MX23_H__ - -#include <mach/mxs.h> - -/* - * OCRAM - */ -#define MX23_OCRAM_BASE_ADDR 0x00000000 -#define MX23_OCRAM_SIZE SZ_32K - -/* - * IO - */ -#define MX23_IO_BASE_ADDR 0x80000000 -#define MX23_IO_SIZE SZ_1M - -#define MX23_ICOLL_BASE_ADDR (MX23_IO_BASE_ADDR + 0x000000) -#define MX23_APBH_DMA_BASE_ADDR (MX23_IO_BASE_ADDR + 0x004000) -#define MX23_BCH_BASE_ADDR (MX23_IO_BASE_ADDR + 0x00a000) -#define MX23_GPMI_BASE_ADDR (MX23_IO_BASE_ADDR + 0x00c000) -#define MX23_SSP1_BASE_ADDR (MX23_IO_BASE_ADDR + 0x010000) -#define MX23_PINCTRL_BASE_ADDR (MX23_IO_BASE_ADDR + 0x018000) -#define MX23_DIGCTL_BASE_ADDR (MX23_IO_BASE_ADDR + 0x01c000) -#define MX23_ETM_BASE_ADDR (MX23_IO_BASE_ADDR + 0x020000) -#define MX23_APBX_DMA_BASE_ADDR (MX23_IO_BASE_ADDR + 0x024000) -#define MX23_DCP_BASE_ADDR (MX23_IO_BASE_ADDR + 0x028000) -#define MX23_PXP_BASE_ADDR (MX23_IO_BASE_ADDR + 0x02a000) -#define MX23_OCOTP_BASE_ADDR (MX23_IO_BASE_ADDR + 0x02c000) -#define MX23_AXI_AHB0_BASE_ADDR (MX23_IO_BASE_ADDR + 0x02e000) -#define MX23_LCDIF_BASE_ADDR (MX23_IO_BASE_ADDR + 0x030000) -#define MX23_SSP2_BASE_ADDR (MX23_IO_BASE_ADDR + 0x034000) -#define MX23_TVENC_BASE_ADDR (MX23_IO_BASE_ADDR + 0x038000) -#define MX23_CLKCTRL_BASE_ADDR (MX23_IO_BASE_ADDR + 0x040000) -#define MX23_SAIF0_BASE_ADDR (MX23_IO_BASE_ADDR + 0x042000) -#define MX23_POWER_BASE_ADDR (MX23_IO_BASE_ADDR + 0x044000) -#define MX23_SAIF1_BASE_ADDR (MX23_IO_BASE_ADDR + 0x046000) -#define MX23_AUDIOOUT_BASE_ADDR (MX23_IO_BASE_ADDR + 0x048000) -#define MX23_AUDIOIN_BASE_ADDR (MX23_IO_BASE_ADDR + 0x04c000) -#define MX23_LRADC_BASE_ADDR (MX23_IO_BASE_ADDR + 0x050000) -#define MX23_SPDIF_BASE_ADDR (MX23_IO_BASE_ADDR + 0x054000) -#define MX23_I2C_BASE_ADDR (MX23_IO_BASE_ADDR + 0x058000) -#define MX23_RTC_BASE_ADDR (MX23_IO_BASE_ADDR + 0x05c000) -#define MX23_PWM_BASE_ADDR (MX23_IO_BASE_ADDR + 0x064000) -#define MX23_TIMROT_BASE_ADDR (MX23_IO_BASE_ADDR + 0x068000) -#define MX23_AUART1_BASE_ADDR (MX23_IO_BASE_ADDR + 0x06c000) -#define MX23_AUART2_BASE_ADDR (MX23_IO_BASE_ADDR + 0x06e000) -#define MX23_DUART_BASE_ADDR (MX23_IO_BASE_ADDR + 0x070000) -#define MX23_USBPHY_BASE_ADDR (MX23_IO_BASE_ADDR + 0x07c000) -#define MX23_USBCTRL_BASE_ADDR (MX23_IO_BASE_ADDR + 0x080000) -#define MX23_DRAM_BASE_ADDR (MX23_IO_BASE_ADDR + 0x0e0000) - -#define MX23_IO_P2V(x) MXS_IO_P2V(x) -#define MX23_IO_ADDRESS(x) IOMEM(MX23_IO_P2V(x)) - -/* - * IRQ - */ -#define MX23_INT_DUART 0 -#define MX23_INT_COMMS_RX 1 -#define MX23_INT_COMMS_TX 1 -#define MX23_INT_SSP2_ERROR 2 -#define MX23_INT_VDD5V 3 -#define MX23_INT_HEADPHONE_SHORT 4 -#define MX23_INT_DAC_DMA 5 -#define MX23_INT_DAC_ERROR 6 -#define MX23_INT_ADC_DMA 7 -#define MX23_INT_ADC_ERROR 8 -#define MX23_INT_SPDIF_DMA 9 -#define MX23_INT_SAIF2_DMA 9 -#define MX23_INT_SPDIF_ERROR 10 -#define MX23_INT_SAIF1_IRQ 10 -#define MX23_INT_SAIF2_IRQ 10 -#define MX23_INT_USB_CTRL 11 -#define MX23_INT_USB_WAKEUP 12 -#define MX23_INT_GPMI_DMA 13 -#define MX23_INT_SSP1_DMA 14 -#define MX23_INT_SSP1_ERROR 15 -#define MX23_INT_GPIO0 16 -#define MX23_INT_GPIO1 17 -#define MX23_INT_GPIO2 18 -#define MX23_INT_SAIF1_DMA 19 -#define MX23_INT_SSP2_DMA 20 -#define MX23_INT_ECC8_IRQ 21 -#define MX23_INT_RTC_ALARM 22 -#define MX23_INT_AUART1_TX_DMA 23 -#define MX23_INT_AUART1 24 -#define MX23_INT_AUART1_RX_DMA 25 -#define MX23_INT_I2C_DMA 26 -#define MX23_INT_I2C_ERROR 27 -#define MX23_INT_TIMER0 28 -#define MX23_INT_TIMER1 29 -#define MX23_INT_TIMER2 30 -#define MX23_INT_TIMER3 31 -#define MX23_INT_BATT_BRNOUT 32 -#define MX23_INT_VDDD_BRNOUT 33 -#define MX23_INT_VDDIO_BRNOUT 34 -#define MX23_INT_VDD18_BRNOUT 35 -#define MX23_INT_TOUCH_DETECT 36 -#define MX23_INT_LRADC_CH0 37 -#define MX23_INT_LRADC_CH1 38 -#define MX23_INT_LRADC_CH2 39 -#define MX23_INT_LRADC_CH3 40 -#define MX23_INT_LRADC_CH4 41 -#define MX23_INT_LRADC_CH5 42 -#define MX23_INT_LRADC_CH6 43 -#define MX23_INT_LRADC_CH7 44 -#define MX23_INT_LCDIF_DMA 45 -#define MX23_INT_LCDIF_ERROR 46 -#define MX23_INT_DIGCTL_DEBUG_TRAP 47 -#define MX23_INT_RTC_1MSEC 48 -#define MX23_INT_DRI_DMA 49 -#define MX23_INT_DRI_ATTENTION 50 -#define MX23_INT_GPMI_ATTENTION 51 -#define MX23_INT_IR 52 -#define MX23_INT_DCP_VMI 53 -#define MX23_INT_DCP 54 -#define MX23_INT_BCH 56 -#define MX23_INT_PXP 57 -#define MX23_INT_AUART2_TX_DMA 58 -#define MX23_INT_AUART2 59 -#define MX23_INT_AUART2_RX_DMA 60 -#define MX23_INT_VDAC_DETECT 61 -#define MX23_INT_VDD5V_DROOP 64 -#define MX23_INT_DCDC4P2_BO 65 - -/* - * APBH DMA - */ -#define MX23_DMA_SSP1 1 -#define MX23_DMA_SSP2 2 -#define MX23_DMA_GPMI0 4 -#define MX23_DMA_GPMI1 5 -#define MX23_DMA_GPMI2 6 -#define MX23_DMA_GPMI3 7 - -/* - * APBX DMA - */ -#define MX23_DMA_ADC 0 -#define MX23_DMA_DAC 1 -#define MX23_DMA_SPDIF 2 -#define MX23_DMA_I2C 3 -#define MX23_DMA_SAIF0 4 -#define MX23_DMA_UART0_RX 6 -#define MX23_DMA_UART0_TX 7 -#define MX23_DMA_UART1_RX 8 -#define MX23_DMA_UART1_TX 9 -#define MX23_DMA_SAIF1 10 - -#endif /* __MACH_MX23_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/mx28.h b/arch/arm/mach-mxs/include/mach/mx28.h deleted file mode 100644 index 30c7990f3c01..000000000000 --- a/arch/arm/mach-mxs/include/mach/mx28.h +++ /dev/null @@ -1,225 +0,0 @@ -/* - * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#ifndef __MACH_MX28_H__ -#define __MACH_MX28_H__ - -#include <mach/mxs.h> - -/* - * OCRAM - */ -#define MX28_OCRAM_BASE_ADDR 0x00000000 -#define MX28_OCRAM_SIZE SZ_128K - -/* - * IO - */ -#define MX28_IO_BASE_ADDR 0x80000000 -#define MX28_IO_SIZE SZ_1M - -#define MX28_ICOLL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x000000) -#define MX28_HSADC_BASE_ADDR (MX28_IO_BASE_ADDR + 0x002000) -#define MX28_APBH_DMA_BASE_ADDR (MX28_IO_BASE_ADDR + 0x004000) -#define MX28_PERFMON_BASE_ADDR (MX28_IO_BASE_ADDR + 0x006000) -#define MX28_BCH_BASE_ADDR (MX28_IO_BASE_ADDR + 0x00a000) -#define MX28_GPMI_BASE_ADDR (MX28_IO_BASE_ADDR + 0x00c000) -#define MX28_SSP0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x010000) -#define MX28_SSP1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x012000) -#define MX28_SSP2_BASE_ADDR (MX28_IO_BASE_ADDR + 0x014000) -#define MX28_SSP3_BASE_ADDR (MX28_IO_BASE_ADDR + 0x016000) -#define MX28_PINCTRL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x018000) -#define MX28_DIGCTL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x01c000) -#define MX28_ETM_BASE_ADDR (MX28_IO_BASE_ADDR + 0x022000) -#define MX28_APBX_DMA_BASE_ADDR (MX28_IO_BASE_ADDR + 0x024000) -#define MX28_DCP_BASE_ADDR (MX28_IO_BASE_ADDR + 0x028000) -#define MX28_PXP_BASE_ADDR (MX28_IO_BASE_ADDR + 0x02a000) -#define MX28_OCOTP_BASE_ADDR (MX28_IO_BASE_ADDR + 0x02c000) -#define MX28_AXI_AHB0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x02e000) -#define MX28_LCDIF_BASE_ADDR (MX28_IO_BASE_ADDR + 0x030000) -#define MX28_CAN0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x032000) -#define MX28_CAN1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x034000) -#define MX28_SIMDBG_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c000) -#define MX28_SIMGPMISEL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c200) -#define MX28_SIMSSPSEL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c300) -#define MX28_SIMMEMSEL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c400) -#define MX28_GPIOMON_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c500) -#define MX28_SIMENET_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c700) -#define MX28_ARMJTAG_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c800) -#define MX28_CLKCTRL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x040000) -#define MX28_SAIF0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x042000) -#define MX28_POWER_BASE_ADDR (MX28_IO_BASE_ADDR + 0x044000) -#define MX28_SAIF1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x046000) -#define MX28_LRADC_BASE_ADDR (MX28_IO_BASE_ADDR + 0x050000) -#define MX28_SPDIF_BASE_ADDR (MX28_IO_BASE_ADDR + 0x054000) -#define MX28_RTC_BASE_ADDR (MX28_IO_BASE_ADDR + 0x056000) -#define MX28_I2C0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x058000) -#define MX28_I2C1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x05a000) -#define MX28_PWM_BASE_ADDR (MX28_IO_BASE_ADDR + 0x064000) -#define MX28_TIMROT_BASE_ADDR (MX28_IO_BASE_ADDR + 0x068000) -#define MX28_AUART0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x06a000) -#define MX28_AUART1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x06c000) -#define MX28_AUART2_BASE_ADDR (MX28_IO_BASE_ADDR + 0x06e000) -#define MX28_AUART3_BASE_ADDR (MX28_IO_BASE_ADDR + 0x070000) -#define MX28_AUART4_BASE_ADDR (MX28_IO_BASE_ADDR + 0x072000) -#define MX28_DUART_BASE_ADDR (MX28_IO_BASE_ADDR + 0x074000) -#define MX28_USBPHY0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x07C000) -#define MX28_USBPHY1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x07e000) -#define MX28_USBCTRL0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x080000) -#define MX28_USBCTRL1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x090000) -#define MX28_DFLPT_BASE_ADDR (MX28_IO_BASE_ADDR + 0x0c0000) -#define MX28_DRAM_BASE_ADDR (MX28_IO_BASE_ADDR + 0x0e0000) -#define MX28_ENET_MAC0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x0f0000) -#define MX28_ENET_MAC1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x0f4000) - -#define MX28_IO_P2V(x) MXS_IO_P2V(x) -#define MX28_IO_ADDRESS(x) IOMEM(MX28_IO_P2V(x)) - -/* - * IRQ - */ -#define MX28_INT_BATT_BRNOUT 0 -#define MX28_INT_VDDD_BRNOUT 1 -#define MX28_INT_VDDIO_BRNOUT 2 -#define MX28_INT_VDDA_BRNOUT 3 -#define MX28_INT_VDD5V_DROOP 4 -#define MX28_INT_DCDC4P2_BRNOUT 5 -#define MX28_INT_VDD5V 6 -#define MX28_INT_CAN0 8 -#define MX28_INT_CAN1 9 -#define MX28_INT_LRADC_TOUCH 10 -#define MX28_INT_HSADC 13 -#define MX28_INT_LRADC_THRESH0 14 -#define MX28_INT_LRADC_THRESH1 15 -#define MX28_INT_LRADC_CH0 16 -#define MX28_INT_LRADC_CH1 17 -#define MX28_INT_LRADC_CH2 18 -#define MX28_INT_LRADC_CH3 19 -#define MX28_INT_LRADC_CH4 20 -#define MX28_INT_LRADC_CH5 21 -#define MX28_INT_LRADC_CH6 22 -#define MX28_INT_LRADC_CH7 23 -#define MX28_INT_LRADC_BUTTON0 24 -#define MX28_INT_LRADC_BUTTON1 25 -#define MX28_INT_PERFMON 27 -#define MX28_INT_RTC_1MSEC 28 -#define MX28_INT_RTC_ALARM 29 -#define MX28_INT_COMMS 31 -#define MX28_INT_EMI_ERR 32 -#define MX28_INT_LCDIF 38 -#define MX28_INT_PXP 39 -#define MX28_INT_BCH 41 -#define MX28_INT_GPMI 42 -#define MX28_INT_SPDIF_ERROR 45 -#define MX28_INT_DUART 47 -#define MX28_INT_TIMER0 48 -#define MX28_INT_TIMER1 49 -#define MX28_INT_TIMER2 50 -#define MX28_INT_TIMER3 51 -#define MX28_INT_DCP_VMI 52 -#define MX28_INT_DCP 53 -#define MX28_INT_DCP_SECURE 54 -#define MX28_INT_SAIF1 58 -#define MX28_INT_SAIF0 59 -#define MX28_INT_SPDIF_DMA 66 -#define MX28_INT_I2C0_DMA 68 -#define MX28_INT_I2C1_DMA 69 -#define MX28_INT_AUART0_RX_DMA 70 -#define MX28_INT_AUART0_TX_DMA 71 -#define MX28_INT_AUART1_RX_DMA 72 -#define MX28_INT_AUART1_TX_DMA 73 -#define MX28_INT_AUART2_RX_DMA 74 -#define MX28_INT_AUART2_TX_DMA 75 -#define MX28_INT_AUART3_RX_DMA 76 -#define MX28_INT_AUART3_TX_DMA 77 -#define MX28_INT_AUART4_RX_DMA 78 -#define MX28_INT_AUART4_TX_DMA 79 -#define MX28_INT_SAIF0_DMA 80 -#define MX28_INT_SAIF1_DMA 81 -#define MX28_INT_SSP0_DMA 82 -#define MX28_INT_SSP1_DMA 83 -#define MX28_INT_SSP2_DMA 84 -#define MX28_INT_SSP3_DMA 85 -#define MX28_INT_LCDIF_DMA 86 -#define MX28_INT_HSADC_DMA 87 -#define MX28_INT_GPMI_DMA 88 -#define MX28_INT_DIGCTL_DEBUG_TRAP 89 -#define MX28_INT_USB1 92 -#define MX28_INT_USB0 93 -#define MX28_INT_USB1_WAKEUP 94 -#define MX28_INT_USB0_WAKEUP 95 -#define MX28_INT_SSP0_ERROR 96 -#define MX28_INT_SSP1_ERROR 97 -#define MX28_INT_SSP2_ERROR 98 -#define MX28_INT_SSP3_ERROR 99 -#define MX28_INT_ENET_SWI 100 -#define MX28_INT_ENET_MAC0 101 -#define MX28_INT_ENET_MAC1 102 -#define MX28_INT_ENET_MAC0_1588 103 -#define MX28_INT_ENET_MAC1_1588 104 -#define MX28_INT_I2C1_ERROR 110 -#define MX28_INT_I2C0_ERROR 111 -#define MX28_INT_AUART0 112 -#define MX28_INT_AUART1 113 -#define MX28_INT_AUART2 114 -#define MX28_INT_AUART3 115 -#define MX28_INT_AUART4 116 -#define MX28_INT_GPIO4 123 -#define MX28_INT_GPIO3 124 -#define MX28_INT_GPIO2 125 -#define MX28_INT_GPIO1 126 -#define MX28_INT_GPIO0 127 - -/* - * APBH DMA - */ -#define MX28_DMA_SSP0 0 -#define MX28_DMA_SSP1 1 -#define MX28_DMA_SSP2 2 -#define MX28_DMA_SSP3 3 -#define MX28_DMA_GPMI0 4 -#define MX28_DMA_GPMI1 5 -#define MX28_DMA_GPMI2 6 -#define MX28_DMA_GPMI3 7 -#define MX28_DMA_GPMI4 8 -#define MX28_DMA_GPMI5 9 -#define MX28_DMA_GPMI6 10 -#define MX28_DMA_GPMI7 11 -#define MX28_DMA_HSADC 12 -#define MX28_DMA_LCDIF 13 - -/* - * APBX DMA - */ -#define MX28_DMA_AUART4_RX 0 -#define MX28_DMA_AUART4_TX 1 -#define MX28_DMA_SPDIF_TX 2 -#define MX28_DMA_SAIF0 4 -#define MX28_DMA_SAIF1 5 -#define MX28_DMA_I2C0 6 -#define MX28_DMA_I2C1 7 -#define MX28_DMA_AUART0_RX 8 -#define MX28_DMA_AUART0_TX 9 -#define MX28_DMA_AUART1_RX 10 -#define MX28_DMA_AUART1_TX 11 -#define MX28_DMA_AUART2_RX 12 -#define MX28_DMA_AUART2_TX 13 -#define MX28_DMA_AUART3_RX 14 -#define MX28_DMA_AUART3_TX 15 - -#endif /* __MACH_MX28_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/mxs.h b/arch/arm/mach-mxs/include/mach/mxs.h deleted file mode 100644 index 7d4fb6d0afda..000000000000 --- a/arch/arm/mach-mxs/include/mach/mxs.h +++ /dev/null @@ -1,117 +0,0 @@ -/* - * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#ifndef __MACH_MXS_H__ -#define __MACH_MXS_H__ - -#ifndef __ASSEMBLER__ -#include <linux/io.h> -#endif -#include <asm/mach-types.h> -#include <mach/digctl.h> -#include <mach/hardware.h> - -/* - * IO addresses common to MXS-based - */ -#define MXS_IO_BASE_ADDR 0x80000000 -#define MXS_IO_SIZE SZ_1M - -#define MXS_ICOLL_BASE_ADDR (MXS_IO_BASE_ADDR + 0x000000) -#define MXS_APBH_DMA_BASE_ADDR (MXS_IO_BASE_ADDR + 0x004000) -#define MXS_BCH_BASE_ADDR (MXS_IO_BASE_ADDR + 0x00a000) -#define MXS_GPMI_BASE_ADDR (MXS_IO_BASE_ADDR + 0x00c000) -#define MXS_PINCTRL_BASE_ADDR (MXS_IO_BASE_ADDR + 0x018000) -#define MXS_DIGCTL_BASE_ADDR (MXS_IO_BASE_ADDR + 0x01c000) -#define MXS_APBX_DMA_BASE_ADDR (MXS_IO_BASE_ADDR + 0x024000) -#define MXS_DCP_BASE_ADDR (MXS_IO_BASE_ADDR + 0x028000) -#define MXS_PXP_BASE_ADDR (MXS_IO_BASE_ADDR + 0x02a000) -#define MXS_OCOTP_BASE_ADDR (MXS_IO_BASE_ADDR + 0x02c000) -#define MXS_AXI_AHB0_BASE_ADDR (MXS_IO_BASE_ADDR + 0x02e000) -#define MXS_LCDIF_BASE_ADDR (MXS_IO_BASE_ADDR + 0x030000) -#define MXS_CLKCTRL_BASE_ADDR (MXS_IO_BASE_ADDR + 0x040000) -#define MXS_SAIF0_BASE_ADDR (MXS_IO_BASE_ADDR + 0x042000) -#define MXS_POWER_BASE_ADDR (MXS_IO_BASE_ADDR + 0x044000) -#define MXS_SAIF1_BASE_ADDR (MXS_IO_BASE_ADDR + 0x046000) -#define MXS_LRADC_BASE_ADDR (MXS_IO_BASE_ADDR + 0x050000) -#define MXS_SPDIF_BASE_ADDR (MXS_IO_BASE_ADDR + 0x054000) -#define MXS_I2C0_BASE_ADDR (MXS_IO_BASE_ADDR + 0x058000) -#define MXS_PWM_BASE_ADDR (MXS_IO_BASE_ADDR + 0x064000) -#define MXS_TIMROT_BASE_ADDR (MXS_IO_BASE_ADDR + 0x068000) -#define MXS_AUART1_BASE_ADDR (MXS_IO_BASE_ADDR + 0x06c000) -#define MXS_AUART2_BASE_ADDR (MXS_IO_BASE_ADDR + 0x06e000) -#define MXS_DRAM_BASE_ADDR (MXS_IO_BASE_ADDR + 0x0e0000) - -/* - * It maps the whole address space to [0xf4000000, 0xf50fffff]. - * - * OCRAM 0x00000000+0x020000 -> 0xf4000000+0x020000 - * IO 0x80000000+0x100000 -> 0xf5000000+0x100000 - */ -#define MXS_IO_P2V(x) (0xf4000000 + \ - (((x) & 0x80000000) >> 7) + \ - (((x) & 0x000fffff))) - -#define MXS_IO_ADDRESS(x) IOMEM(MXS_IO_P2V(x)) - -#define mxs_map_entry(soc, name, _type) { \ - .virtual = soc ## _IO_P2V(soc ## _ ## name ## _BASE_ADDR), \ - .pfn = __phys_to_pfn(soc ## _ ## name ## _BASE_ADDR), \ - .length = soc ## _ ## name ## _SIZE, \ - .type = _type, \ -} - -#define MXS_GPIO_NR(bank, nr) ((bank) * 32 + (nr)) - -#define MXS_SET_ADDR 0x4 -#define MXS_CLR_ADDR 0x8 -#define MXS_TOG_ADDR 0xc - -#ifndef __ASSEMBLER__ -static inline void __mxs_setl(u32 mask, void __iomem *reg) -{ - __raw_writel(mask, reg + MXS_SET_ADDR); -} - -static inline void __mxs_clrl(u32 mask, void __iomem *reg) -{ - __raw_writel(mask, reg + MXS_CLR_ADDR); -} - -static inline void __mxs_togl(u32 mask, void __iomem *reg) -{ - __raw_writel(mask, reg + MXS_TOG_ADDR); -} - -/* - * MXS CPU types - */ -#define MXS_CHIPID (MXS_IO_ADDRESS(MXS_DIGCTL_BASE_ADDR) + HW_DIGCTL_CHIPID) - -static inline int cpu_is_mx23(void) -{ - return ((__raw_readl(MXS_CHIPID) >> 16) == 0x3780); -} - -static inline int cpu_is_mx28(void) -{ - return ((__raw_readl(MXS_CHIPID) >> 16) == 0x2800); -} -#endif - -#endif /* __MACH_MXS_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/timex.h b/arch/arm/mach-mxs/include/mach/timex.h deleted file mode 100644 index 734ce8984a64..000000000000 --- a/arch/arm/mach-mxs/include/mach/timex.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * Copyright (C) 1999 ARM Limited - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __MACH_MXS_TIMEX_H__ -#define __MACH_MXS_TIMEX_H__ - -#define CLOCK_TICK_RATE 32000 /* 32K */ - -#endif /* __MACH_MXS_TIMEX_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/uncompress.h b/arch/arm/mach-mxs/include/mach/uncompress.h deleted file mode 100644 index 533f5186e200..000000000000 --- a/arch/arm/mach-mxs/include/mach/uncompress.h +++ /dev/null @@ -1,76 +0,0 @@ -/* - * arch/arm/mach-mxs/include/mach/uncompress.h - * - * Copyright (C) 1999 ARM Limited - * Copyright (C) Shane Nay (shane@minirl.com) - * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#ifndef __MACH_MXS_UNCOMPRESS_H__ -#define __MACH_MXS_UNCOMPRESS_H__ - -unsigned long mxs_duart_base; - -#define MXS_DUART(x) (*(volatile unsigned long *)(mxs_duart_base + (x))) - -#define MXS_DUART_DR 0x00 -#define MXS_DUART_FR 0x18 -#define MXS_DUART_FR_TXFE (1 << 7) -#define MXS_DUART_CR 0x30 -#define MXS_DUART_CR_UARTEN (1 << 0) - -/* - * The following code assumes the serial port has already been - * initialized by the bootloader. If it's not, the output is - * simply discarded. - */ - -static void putc(int ch) -{ - if (!mxs_duart_base) - return; - if (!(MXS_DUART(MXS_DUART_CR) & MXS_DUART_CR_UARTEN)) - return; - - while (!(MXS_DUART(MXS_DUART_FR) & MXS_DUART_FR_TXFE)) - barrier(); - - MXS_DUART(MXS_DUART_DR) = ch; -} - -static inline void flush(void) -{ -} - -#define MX23_DUART_BASE_ADDR 0x80070000 -#define MX28_DUART_BASE_ADDR 0x80074000 -#define MXS_DIGCTL_CHIPID 0x8001c310 - -static inline void __arch_decomp_setup(unsigned long arch_id) -{ - u16 chipid = (*(volatile unsigned long *) MXS_DIGCTL_CHIPID) >> 16; - - switch (chipid) { - case 0x3780: - mxs_duart_base = MX23_DUART_BASE_ADDR; - break; - case 0x2800: - mxs_duart_base = MX28_DUART_BASE_ADDR; - break; - default: - break; - } -} - -#define arch_decomp_setup() __arch_decomp_setup(arch_id) - -#endif /* __MACH_MXS_UNCOMPRESS_H__ */ diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c index e7b781d3788f..5b62b6489d4b 100644 --- a/arch/arm/mach-mxs/mach-mxs.c +++ b/arch/arm/mach-mxs/mach-mxs.c @@ -11,122 +11,54 @@ */ #include <linux/clk.h> +#include <linux/clk/mxs.h> #include <linux/clkdev.h> +#include <linux/clocksource.h> #include <linux/can/platform/flexcan.h> #include <linux/delay.h> #include <linux/err.h> #include <linux/gpio.h> #include <linux/init.h> +#include <linux/irqchip.h> +#include <linux/irqchip/mxs.h> #include <linux/micrel_phy.h> -#include <linux/mxsfb.h> +#include <linux/of_address.h> #include <linux/of_platform.h> #include <linux/phy.h> #include <linux/pinctrl/consumer.h> #include <asm/mach/arch.h> +#include <asm/mach/map.h> #include <asm/mach/time.h> -#include <mach/common.h> -#include <mach/digctl.h> -#include <mach/mxs.h> - -static struct fb_videomode mx23evk_video_modes[] = { - { - .name = "Samsung-LMS430HF02", - .refresh = 60, - .xres = 480, - .yres = 272, - .pixclock = 108096, /* picosecond (9.2 MHz) */ - .left_margin = 15, - .right_margin = 8, - .upper_margin = 12, - .lower_margin = 4, - .hsync_len = 1, - .vsync_len = 1, - }, -}; +#include <asm/system_misc.h> -static struct fb_videomode mx28evk_video_modes[] = { - { - .name = "Seiko-43WVF1G", - .refresh = 60, - .xres = 800, - .yres = 480, - .pixclock = 29851, /* picosecond (33.5 MHz) */ - .left_margin = 89, - .right_margin = 164, - .upper_margin = 23, - .lower_margin = 10, - .hsync_len = 10, - .vsync_len = 10, - }, -}; +#include "pm.h" -static struct fb_videomode m28evk_video_modes[] = { - { - .name = "Ampire AM-800480R2TMQW-T01H", - .refresh = 60, - .xres = 800, - .yres = 480, - .pixclock = 30066, /* picosecond (33.26 MHz) */ - .left_margin = 0, - .right_margin = 256, - .upper_margin = 0, - .lower_margin = 45, - .hsync_len = 1, - .vsync_len = 1, - }, -}; +/* MXS DIGCTL SAIF CLKMUX */ +#define MXS_DIGCTL_SAIF_CLKMUX_DIRECT 0x0 +#define MXS_DIGCTL_SAIF_CLKMUX_CROSSINPUT 0x1 +#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0 0x2 +#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR1 0x3 -static struct fb_videomode apx4devkit_video_modes[] = { - { - .name = "HannStar PJ70112A", - .refresh = 60, - .xres = 800, - .yres = 480, - .pixclock = 33333, /* picosecond (30.00 MHz) */ - .left_margin = 88, - .right_margin = 40, - .upper_margin = 32, - .lower_margin = 13, - .hsync_len = 48, - .vsync_len = 3, - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, - }, -}; +#define MXS_GPIO_NR(bank, nr) ((bank) * 32 + (nr)) -static struct fb_videomode apf28dev_video_modes[] = { - { - .name = "LW700", - .refresh = 60, - .xres = 800, - .yres = 480, - .pixclock = 30303, /* picosecond */ - .left_margin = 96, - .right_margin = 96, /* at least 3 & 1 */ - .upper_margin = 0x14, - .lower_margin = 0x15, - .hsync_len = 64, - .vsync_len = 4, - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, - }, -}; +#define MXS_SET_ADDR 0x4 +#define MXS_CLR_ADDR 0x8 +#define MXS_TOG_ADDR 0xc -static struct fb_videomode cfa10049_video_modes[] = { - { - .name = "Himax HX8357-B", - .refresh = 60, - .xres = 320, - .yres = 480, - .pixclock = 108506, /* picosecond (9.216 MHz) */ - .left_margin = 2, - .right_margin = 2, - .upper_margin = 2, - .lower_margin = 2, - .hsync_len = 15, - .vsync_len = 15, - }, -}; +static inline void __mxs_setl(u32 mask, void __iomem *reg) +{ + __raw_writel(mask, reg + MXS_SET_ADDR); +} -static struct mxsfb_platform_data mxsfb_pdata __initdata; +static inline void __mxs_clrl(u32 mask, void __iomem *reg) +{ + __raw_writel(mask, reg + MXS_CLR_ADDR); +} + +static inline void __mxs_togl(u32 mask, void __iomem *reg) +{ + __raw_writel(mask, reg + MXS_TOG_ADDR); +} /* * MX28EVK_FLEXCAN_SWITCH is shared between both flexcan controllers @@ -158,21 +90,85 @@ static void mx28evk_flexcan1_switch(int enable) static struct flexcan_platform_data flexcan_pdata[2]; static struct of_dev_auxdata mxs_auxdata_lookup[] __initdata = { - OF_DEV_AUXDATA("fsl,imx23-lcdif", 0x80030000, NULL, &mxsfb_pdata), - OF_DEV_AUXDATA("fsl,imx28-lcdif", 0x80030000, NULL, &mxsfb_pdata), OF_DEV_AUXDATA("fsl,imx28-flexcan", 0x80032000, NULL, &flexcan_pdata[0]), OF_DEV_AUXDATA("fsl,imx28-flexcan", 0x80034000, NULL, &flexcan_pdata[1]), { /* sentinel */ } }; -static void __init imx23_timer_init(void) -{ - mx23_clocks_init(); -} +#define OCOTP_WORD_OFFSET 0x20 +#define OCOTP_WORD_COUNT 0x20 + +#define BM_OCOTP_CTRL_BUSY (1 << 8) +#define BM_OCOTP_CTRL_ERROR (1 << 9) +#define BM_OCOTP_CTRL_RD_BANK_OPEN (1 << 12) -static void __init imx28_timer_init(void) +static DEFINE_MUTEX(ocotp_mutex); +static u32 ocotp_words[OCOTP_WORD_COUNT]; + +static const u32 *mxs_get_ocotp(void) { - mx28_clocks_init(); + struct device_node *np; + void __iomem *ocotp_base; + int timeout = 0x400; + size_t i; + static int once; + + if (once) + return ocotp_words; + + np = of_find_compatible_node(NULL, NULL, "fsl,ocotp"); + ocotp_base = of_iomap(np, 0); + WARN_ON(!ocotp_base); + + mutex_lock(&ocotp_mutex); + + /* + * clk_enable(hbus_clk) for ocotp can be skipped + * as it must be on when system is running. + */ + + /* try to clear ERROR bit */ + __mxs_clrl(BM_OCOTP_CTRL_ERROR, ocotp_base); + + /* check both BUSY and ERROR cleared */ + while ((__raw_readl(ocotp_base) & + (BM_OCOTP_CTRL_BUSY | BM_OCOTP_CTRL_ERROR)) && --timeout) + cpu_relax(); + + if (unlikely(!timeout)) + goto error_unlock; + + /* open OCOTP banks for read */ + __mxs_setl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base); + + /* approximately wait 32 hclk cycles */ + udelay(1); + + /* poll BUSY bit becoming cleared */ + timeout = 0x400; + while ((__raw_readl(ocotp_base) & BM_OCOTP_CTRL_BUSY) && --timeout) + cpu_relax(); + + if (unlikely(!timeout)) + goto error_unlock; + + for (i = 0; i < OCOTP_WORD_COUNT; i++) + ocotp_words[i] = __raw_readl(ocotp_base + OCOTP_WORD_OFFSET + + i * 0x10); + + /* close banks for power saving */ + __mxs_clrl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base); + + once = 1; + + mutex_unlock(&ocotp_mutex); + + return ocotp_words; + +error_unlock: + mutex_unlock(&ocotp_mutex); + pr_err("%s: timeout in reading OCOTP\n", __func__); + return NULL; } enum mac_oui { @@ -243,16 +239,6 @@ static void __init update_fec_mac_prop(enum mac_oui oui) } } -static void __init imx23_evk_init(void) -{ - mxsfb_pdata.mode_list = mx23evk_video_modes; - mxsfb_pdata.mode_count = ARRAY_SIZE(mx23evk_video_modes); - mxsfb_pdata.default_bpp = 32; - mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT; - mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT | - MXSFB_SYNC_DOTCLK_FAILING_ACT; -} - static inline void enable_clk_enet_out(void) { struct clk *clk = clk_get_sys("enet_out", NULL); @@ -263,16 +249,8 @@ static inline void enable_clk_enet_out(void) static void __init imx28_evk_init(void) { - enable_clk_enet_out(); update_fec_mac_prop(OUI_FSL); - mxsfb_pdata.mode_list = mx28evk_video_modes; - mxsfb_pdata.mode_count = ARRAY_SIZE(mx28evk_video_modes); - mxsfb_pdata.default_bpp = 32; - mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT; - mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT | - MXSFB_SYNC_DOTCLK_FAILING_ACT; - mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0); } @@ -285,20 +263,6 @@ static void __init imx28_evk_post_init(void) } } -static void __init m28evk_init(void) -{ - mxsfb_pdata.mode_list = m28evk_video_modes; - mxsfb_pdata.mode_count = ARRAY_SIZE(m28evk_video_modes); - mxsfb_pdata.default_bpp = 16; - mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT; - mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT; -} - -static void __init sc_sps1_init(void) -{ - enable_clk_enet_out(); -} - static int apx4devkit_phy_fixup(struct phy_device *phy) { phy->dev_flags |= MICREL_PHY_50MHZ_CLK; @@ -312,13 +276,6 @@ static void __init apx4devkit_init(void) if (IS_BUILTIN(CONFIG_PHYLIB)) phy_register_fixup_for_uid(PHY_ID_KSZ8051, MICREL_PHY_ID_MASK, apx4devkit_phy_fixup); - - mxsfb_pdata.mode_list = apx4devkit_video_modes; - mxsfb_pdata.mode_count = ARRAY_SIZE(apx4devkit_video_modes); - mxsfb_pdata.default_bpp = 32; - mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT; - mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT | - MXSFB_SYNC_DOTCLK_FAILING_ACT; } #define ENET0_MDC__GPIO_4_0 MXS_GPIO_NR(4, 0) @@ -397,52 +354,24 @@ static void __init tx28_post_init(void) static void __init cfa10049_init(void) { - enable_clk_enet_out(); update_fec_mac_prop(OUI_CRYSTALFONTZ); - - mxsfb_pdata.mode_list = cfa10049_video_modes; - mxsfb_pdata.mode_count = ARRAY_SIZE(cfa10049_video_modes); - mxsfb_pdata.default_bpp = 32; - mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT; - mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT; } static void __init cfa10037_init(void) { - enable_clk_enet_out(); update_fec_mac_prop(OUI_CRYSTALFONTZ); } -static void __init apf28_init(void) -{ - enable_clk_enet_out(); - - mxsfb_pdata.mode_list = apf28dev_video_modes; - mxsfb_pdata.mode_count = ARRAY_SIZE(apf28dev_video_modes); - mxsfb_pdata.default_bpp = 16; - mxsfb_pdata.ld_intf_width = STMLCDIF_16BIT; - mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT | - MXSFB_SYNC_DOTCLK_FAILING_ACT; -} - static void __init mxs_machine_init(void) { if (of_machine_is_compatible("fsl,imx28-evk")) imx28_evk_init(); - else if (of_machine_is_compatible("fsl,imx23-evk")) - imx23_evk_init(); - else if (of_machine_is_compatible("denx,m28evk")) - m28evk_init(); else if (of_machine_is_compatible("bluegiga,apx4devkit")) apx4devkit_init(); else if (of_machine_is_compatible("crystalfontz,cfa10037")) cfa10037_init(); else if (of_machine_is_compatible("crystalfontz,cfa10049")) cfa10049_init(); - else if (of_machine_is_compatible("armadeus,imx28-apf28")) - apf28_init(); - else if (of_machine_is_compatible("schulercontrol,imx28-sps1")) - sc_sps1_init(); of_platform_populate(NULL, of_default_bus_match_table, mxs_auxdata_lookup, NULL); @@ -454,32 +383,63 @@ static void __init mxs_machine_init(void) imx28_evk_post_init(); } -static const char *imx23_dt_compat[] __initdata = { - "fsl,imx23", - NULL, -}; +#define MX23_CLKCTRL_RESET_OFFSET 0x120 +#define MX28_CLKCTRL_RESET_OFFSET 0x1e0 +#define MXS_CLKCTRL_RESET_CHIP (1 << 1) -static const char *imx28_dt_compat[] __initdata = { +/* + * Reset the system. It is called by machine_restart(). + */ +static void mxs_restart(char mode, const char *cmd) +{ + struct device_node *np; + void __iomem *reset_addr; + + np = of_find_compatible_node(NULL, NULL, "fsl,clkctrl"); + reset_addr = of_iomap(np, 0); + if (!reset_addr) + goto soft; + + if (of_device_is_compatible(np, "fsl,imx23-clkctrl")) + reset_addr += MX23_CLKCTRL_RESET_OFFSET; + else + reset_addr += MX28_CLKCTRL_RESET_OFFSET; + + /* reset the chip */ + __mxs_setl(MXS_CLKCTRL_RESET_CHIP, reset_addr); + + pr_err("Failed to assert the chip reset\n"); + + /* Delay to allow the serial port to show the message */ + mdelay(50); + +soft: + /* We'll take a jump through zero as a poor second */ + soft_restart(0); +} + +static void __init mxs_timer_init(void) +{ + if (of_machine_is_compatible("fsl,imx23")) + mx23_clocks_init(); + else + mx28_clocks_init(); + clocksource_of_init(); +} + +static const char *mxs_dt_compat[] __initdata = { "fsl,imx28", + "fsl,imx23", NULL, }; -DT_MACHINE_START(IMX23, "Freescale i.MX23 (Device Tree)") - .map_io = mx23_map_io, - .init_irq = icoll_init_irq, - .handle_irq = icoll_handle_irq, - .init_time = imx23_timer_init, - .init_machine = mxs_machine_init, - .dt_compat = imx23_dt_compat, - .restart = mxs_restart, -MACHINE_END - -DT_MACHINE_START(IMX28, "Freescale i.MX28 (Device Tree)") - .map_io = mx28_map_io, - .init_irq = icoll_init_irq, +DT_MACHINE_START(MXS, "Freescale MXS (Device Tree)") + .map_io = debug_ll_io_init, + .init_irq = irqchip_init, .handle_irq = icoll_handle_irq, - .init_time = imx28_timer_init, + .init_time = mxs_timer_init, .init_machine = mxs_machine_init, - .dt_compat = imx28_dt_compat, + .init_late = mxs_pm_init, + .dt_compat = mxs_dt_compat, .restart = mxs_restart, MACHINE_END diff --git a/arch/arm/mach-mxs/mm.c b/arch/arm/mach-mxs/mm.c deleted file mode 100644 index e63b7d87acbd..000000000000 --- a/arch/arm/mach-mxs/mm.c +++ /dev/null @@ -1,52 +0,0 @@ -/* - * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - * - * Create static mapping between physical to virtual memory. - */ - -#include <linux/mm.h> -#include <linux/init.h> - -#include <asm/mach/map.h> - -#include <mach/mx23.h> -#include <mach/mx28.h> -#include <mach/common.h> - -/* - * Define the MX23 memory map. - */ -static struct map_desc mx23_io_desc[] __initdata = { - mxs_map_entry(MX23, OCRAM, MT_DEVICE), - mxs_map_entry(MX23, IO, MT_DEVICE), -}; - -/* - * Define the MX28 memory map. - */ -static struct map_desc mx28_io_desc[] __initdata = { - mxs_map_entry(MX28, OCRAM, MT_DEVICE), - mxs_map_entry(MX28, IO, MT_DEVICE), -}; - -/* - * This function initializes the memory map. It is called during the - * system startup to create static physical to virtual memory mappings - * for the IO modules. - */ -void __init mx23_map_io(void) -{ - iotable_init(mx23_io_desc, ARRAY_SIZE(mx23_io_desc)); -} - -void __init mx28_map_io(void) -{ - iotable_init(mx28_io_desc, ARRAY_SIZE(mx28_io_desc)); -} diff --git a/arch/arm/mach-mxs/ocotp.c b/arch/arm/mach-mxs/ocotp.c deleted file mode 100644 index 1dff46703753..000000000000 --- a/arch/arm/mach-mxs/ocotp.c +++ /dev/null @@ -1,93 +0,0 @@ -/* - * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/mutex.h> - -#include <asm/processor.h> /* for cpu_relax() */ - -#include <mach/mxs.h> -#include <mach/common.h> - -#define OCOTP_WORD_OFFSET 0x20 -#define OCOTP_WORD_COUNT 0x20 - -#define BM_OCOTP_CTRL_BUSY (1 << 8) -#define BM_OCOTP_CTRL_ERROR (1 << 9) -#define BM_OCOTP_CTRL_RD_BANK_OPEN (1 << 12) - -static DEFINE_MUTEX(ocotp_mutex); -static u32 ocotp_words[OCOTP_WORD_COUNT]; - -const u32 *mxs_get_ocotp(void) -{ - void __iomem *ocotp_base = MXS_IO_ADDRESS(MXS_OCOTP_BASE_ADDR); - int timeout = 0x400; - size_t i; - static int once = 0; - - if (once) - return ocotp_words; - - mutex_lock(&ocotp_mutex); - - /* - * clk_enable(hbus_clk) for ocotp can be skipped - * as it must be on when system is running. - */ - - /* try to clear ERROR bit */ - __mxs_clrl(BM_OCOTP_CTRL_ERROR, ocotp_base); - - /* check both BUSY and ERROR cleared */ - while ((__raw_readl(ocotp_base) & - (BM_OCOTP_CTRL_BUSY | BM_OCOTP_CTRL_ERROR)) && --timeout) - cpu_relax(); - - if (unlikely(!timeout)) - goto error_unlock; - - /* open OCOTP banks for read */ - __mxs_setl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base); - - /* approximately wait 32 hclk cycles */ - udelay(1); - - /* poll BUSY bit becoming cleared */ - timeout = 0x400; - while ((__raw_readl(ocotp_base) & BM_OCOTP_CTRL_BUSY) && --timeout) - cpu_relax(); - - if (unlikely(!timeout)) - goto error_unlock; - - for (i = 0; i < OCOTP_WORD_COUNT; i++) - ocotp_words[i] = __raw_readl(ocotp_base + OCOTP_WORD_OFFSET + - i * 0x10); - - /* close banks for power saving */ - __mxs_clrl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base); - - once = 1; - - mutex_unlock(&ocotp_mutex); - - return ocotp_words; - -error_unlock: - mutex_unlock(&ocotp_mutex); - pr_err("%s: timeout in reading OCOTP\n", __func__); - return NULL; -} diff --git a/arch/arm/mach-mxs/pm.c b/arch/arm/mach-mxs/pm.c index a9b4bbcdafb4..b2494d2db2c4 100644 --- a/arch/arm/mach-mxs/pm.c +++ b/arch/arm/mach-mxs/pm.c @@ -34,9 +34,7 @@ static struct platform_suspend_ops mxs_suspend_ops = { .valid = suspend_valid_only_mem, }; -static int __init mxs_pm_init(void) +void __init mxs_pm_init(void) { suspend_set_ops(&mxs_suspend_ops); - return 0; } -device_initcall(mxs_pm_init); diff --git a/arch/arm/mach-h720x/include/mach/timex.h b/arch/arm/mach-mxs/pm.h index 3f2f447ff36b..f57e7cdece2e 100644 --- a/arch/arm/mach-h720x/include/mach/timex.h +++ b/arch/arm/mach-mxs/pm.h @@ -1,15 +1,14 @@ /* - * arch/arm/mach-h720x/include/mach/timex.h - * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc. + * Copyright (C) 2013 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#ifndef __ASM_ARCH_TIMEX -#define __ASM_ARCH_TIMEX +#ifndef __ARCH_MXS_PM_H +#define __ARCH_MXS_PM_H -#define CLOCK_TICK_RATE 3686400 +void mxs_pm_init(void); #endif diff --git a/arch/arm/mach-mxs/system.c b/arch/arm/mach-mxs/system.c deleted file mode 100644 index 30042e23bfa7..000000000000 --- a/arch/arm/mach-mxs/system.c +++ /dev/null @@ -1,139 +0,0 @@ -/* - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * Copyright 2006-2007,2010 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * Copyright 2009 Ilya Yanok, Emcraft Systems Ltd, yanok@emcraft.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/kernel.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/err.h> -#include <linux/delay.h> -#include <linux/init.h> -#include <linux/module.h> - -#include <asm/proc-fns.h> -#include <asm/system_misc.h> - -#include <mach/mxs.h> -#include <mach/common.h> - -#define MX23_CLKCTRL_RESET_OFFSET 0x120 -#define MX28_CLKCTRL_RESET_OFFSET 0x1e0 -#define MXS_CLKCTRL_RESET_CHIP (1 << 1) - -#define MXS_MODULE_CLKGATE (1 << 30) -#define MXS_MODULE_SFTRST (1 << 31) - -static void __iomem *mxs_clkctrl_reset_addr; - -/* - * Reset the system. It is called by machine_restart(). - */ -void mxs_restart(char mode, const char *cmd) -{ - /* reset the chip */ - __mxs_setl(MXS_CLKCTRL_RESET_CHIP, mxs_clkctrl_reset_addr); - - pr_err("Failed to assert the chip reset\n"); - - /* Delay to allow the serial port to show the message */ - mdelay(50); - - /* We'll take a jump through zero as a poor second */ - soft_restart(0); -} - -static int __init mxs_arch_reset_init(void) -{ - struct clk *clk; - - mxs_clkctrl_reset_addr = MXS_IO_ADDRESS(MXS_CLKCTRL_BASE_ADDR) + - (cpu_is_mx23() ? MX23_CLKCTRL_RESET_OFFSET : - MX28_CLKCTRL_RESET_OFFSET); - - clk = clk_get_sys("rtc", NULL); - if (!IS_ERR(clk)) - clk_prepare_enable(clk); - - return 0; -} -core_initcall(mxs_arch_reset_init); - -/* - * Clear the bit and poll it cleared. This is usually called with - * a reset address and mask being either SFTRST(bit 31) or CLKGATE - * (bit 30). - */ -static int clear_poll_bit(void __iomem *addr, u32 mask) -{ - int timeout = 0x400; - - /* clear the bit */ - __mxs_clrl(mask, addr); - - /* - * SFTRST needs 3 GPMI clocks to settle, the reference manual - * recommends to wait 1us. - */ - udelay(1); - - /* poll the bit becoming clear */ - while ((__raw_readl(addr) & mask) && --timeout) - /* nothing */; - - return !timeout; -} - -int mxs_reset_block(void __iomem *reset_addr) -{ - int ret; - int timeout = 0x400; - - /* clear and poll SFTRST */ - ret = clear_poll_bit(reset_addr, MXS_MODULE_SFTRST); - if (unlikely(ret)) - goto error; - - /* clear CLKGATE */ - __mxs_clrl(MXS_MODULE_CLKGATE, reset_addr); - - /* set SFTRST to reset the block */ - __mxs_setl(MXS_MODULE_SFTRST, reset_addr); - udelay(1); - - /* poll CLKGATE becoming set */ - while ((!(__raw_readl(reset_addr) & MXS_MODULE_CLKGATE)) && --timeout) - /* nothing */; - if (unlikely(!timeout)) - goto error; - - /* clear and poll SFTRST */ - ret = clear_poll_bit(reset_addr, MXS_MODULE_SFTRST); - if (unlikely(ret)) - goto error; - - /* clear and poll CLKGATE */ - ret = clear_poll_bit(reset_addr, MXS_MODULE_CLKGATE); - if (unlikely(ret)) - goto error; - - return 0; - -error: - pr_err("%s(%p): module reset timeout\n", __func__, reset_addr); - return -ETIMEDOUT; -} -EXPORT_SYMBOL(mxs_reset_block); diff --git a/arch/arm/mach-mxs/timer.c b/arch/arm/mach-mxs/timer.c deleted file mode 100644 index 421020498a1b..000000000000 --- a/arch/arm/mach-mxs/timer.c +++ /dev/null @@ -1,306 +0,0 @@ -/* - * Copyright (C) 2000-2001 Deep Blue Solutions - * Copyright (C) 2002 Shane Nay (shane@minirl.com) - * Copyright (C) 2006-2007 Pavel Pisa (ppisa@pikron.com) - * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) - * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#include <linux/err.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/clockchips.h> -#include <linux/clk.h> -#include <linux/of.h> -#include <linux/of_irq.h> - -#include <asm/mach/time.h> -#include <asm/sched_clock.h> -#include <mach/mxs.h> -#include <mach/common.h> - -/* - * There are 2 versions of the timrot on Freescale MXS-based SoCs. - * The v1 on MX23 only gets 16 bits counter, while v2 on MX28 - * extends the counter to 32 bits. - * - * The implementation uses two timers, one for clock_event and - * another for clocksource. MX28 uses timrot 0 and 1, while MX23 - * uses 0 and 2. - */ - -#define MX23_TIMROT_VERSION_OFFSET 0x0a0 -#define MX28_TIMROT_VERSION_OFFSET 0x120 -#define BP_TIMROT_MAJOR_VERSION 24 -#define BV_TIMROT_VERSION_1 0x01 -#define BV_TIMROT_VERSION_2 0x02 -#define timrot_is_v1() (timrot_major_version == BV_TIMROT_VERSION_1) - -/* - * There are 4 registers for each timrotv2 instance, and 2 registers - * for each timrotv1. So address step 0x40 in macros below strides - * one instance of timrotv2 while two instances of timrotv1. - * - * As the result, HW_TIMROT_XXXn(1) defines the address of timrot1 - * on MX28 while timrot2 on MX23. - */ -/* common between v1 and v2 */ -#define HW_TIMROT_ROTCTRL 0x00 -#define HW_TIMROT_TIMCTRLn(n) (0x20 + (n) * 0x40) -/* v1 only */ -#define HW_TIMROT_TIMCOUNTn(n) (0x30 + (n) * 0x40) -/* v2 only */ -#define HW_TIMROT_RUNNING_COUNTn(n) (0x30 + (n) * 0x40) -#define HW_TIMROT_FIXED_COUNTn(n) (0x40 + (n) * 0x40) - -#define BM_TIMROT_TIMCTRLn_RELOAD (1 << 6) -#define BM_TIMROT_TIMCTRLn_UPDATE (1 << 7) -#define BM_TIMROT_TIMCTRLn_IRQ_EN (1 << 14) -#define BM_TIMROT_TIMCTRLn_IRQ (1 << 15) -#define BP_TIMROT_TIMCTRLn_SELECT 0 -#define BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL 0x8 -#define BV_TIMROTv2_TIMCTRLn_SELECT__32KHZ_XTAL 0xb -#define BV_TIMROTv2_TIMCTRLn_SELECT__TICK_ALWAYS 0xf - -static struct clock_event_device mxs_clockevent_device; -static enum clock_event_mode mxs_clockevent_mode = CLOCK_EVT_MODE_UNUSED; - -static void __iomem *mxs_timrot_base = MXS_IO_ADDRESS(MXS_TIMROT_BASE_ADDR); -static u32 timrot_major_version; - -static inline void timrot_irq_disable(void) -{ - __mxs_clrl(BM_TIMROT_TIMCTRLn_IRQ_EN, - mxs_timrot_base + HW_TIMROT_TIMCTRLn(0)); -} - -static inline void timrot_irq_enable(void) -{ - __mxs_setl(BM_TIMROT_TIMCTRLn_IRQ_EN, - mxs_timrot_base + HW_TIMROT_TIMCTRLn(0)); -} - -static void timrot_irq_acknowledge(void) -{ - __mxs_clrl(BM_TIMROT_TIMCTRLn_IRQ, - mxs_timrot_base + HW_TIMROT_TIMCTRLn(0)); -} - -static cycle_t timrotv1_get_cycles(struct clocksource *cs) -{ - return ~((__raw_readl(mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1)) - & 0xffff0000) >> 16); -} - -static int timrotv1_set_next_event(unsigned long evt, - struct clock_event_device *dev) -{ - /* timrot decrements the count */ - __raw_writel(evt, mxs_timrot_base + HW_TIMROT_TIMCOUNTn(0)); - - return 0; -} - -static int timrotv2_set_next_event(unsigned long evt, - struct clock_event_device *dev) -{ - /* timrot decrements the count */ - __raw_writel(evt, mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(0)); - - return 0; -} - -static irqreturn_t mxs_timer_interrupt(int irq, void *dev_id) -{ - struct clock_event_device *evt = dev_id; - - timrot_irq_acknowledge(); - evt->event_handler(evt); - - return IRQ_HANDLED; -} - -static struct irqaction mxs_timer_irq = { - .name = "MXS Timer Tick", - .dev_id = &mxs_clockevent_device, - .flags = IRQF_TIMER | IRQF_IRQPOLL, - .handler = mxs_timer_interrupt, -}; - -#ifdef DEBUG -static const char *clock_event_mode_label[] const = { - [CLOCK_EVT_MODE_PERIODIC] = "CLOCK_EVT_MODE_PERIODIC", - [CLOCK_EVT_MODE_ONESHOT] = "CLOCK_EVT_MODE_ONESHOT", - [CLOCK_EVT_MODE_SHUTDOWN] = "CLOCK_EVT_MODE_SHUTDOWN", - [CLOCK_EVT_MODE_UNUSED] = "CLOCK_EVT_MODE_UNUSED" -}; -#endif /* DEBUG */ - -static void mxs_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) -{ - /* Disable interrupt in timer module */ - timrot_irq_disable(); - - if (mode != mxs_clockevent_mode) { - /* Set event time into the furthest future */ - if (timrot_is_v1()) - __raw_writel(0xffff, - mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1)); - else - __raw_writel(0xffffffff, - mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(1)); - - /* Clear pending interrupt */ - timrot_irq_acknowledge(); - } - -#ifdef DEBUG - pr_info("%s: changing mode from %s to %s\n", __func__, - clock_event_mode_label[mxs_clockevent_mode], - clock_event_mode_label[mode]); -#endif /* DEBUG */ - - /* Remember timer mode */ - mxs_clockevent_mode = mode; - - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - pr_err("%s: Periodic mode is not implemented\n", __func__); - break; - case CLOCK_EVT_MODE_ONESHOT: - timrot_irq_enable(); - break; - case CLOCK_EVT_MODE_SHUTDOWN: - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_RESUME: - /* Left event sources disabled, no more interrupts appear */ - break; - } -} - -static struct clock_event_device mxs_clockevent_device = { - .name = "mxs_timrot", - .features = CLOCK_EVT_FEAT_ONESHOT, - .set_mode = mxs_set_mode, - .set_next_event = timrotv2_set_next_event, - .rating = 200, -}; - -static int __init mxs_clockevent_init(struct clk *timer_clk) -{ - if (timrot_is_v1()) - mxs_clockevent_device.set_next_event = timrotv1_set_next_event; - mxs_clockevent_device.cpumask = cpumask_of(0); - clockevents_config_and_register(&mxs_clockevent_device, - clk_get_rate(timer_clk), - timrot_is_v1() ? 0xf : 0x2, - timrot_is_v1() ? 0xfffe : 0xfffffffe); - - return 0; -} - -static struct clocksource clocksource_mxs = { - .name = "mxs_timer", - .rating = 200, - .read = timrotv1_get_cycles, - .mask = CLOCKSOURCE_MASK(16), - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - -static u32 notrace mxs_read_sched_clock_v2(void) -{ - return ~readl_relaxed(mxs_timrot_base + HW_TIMROT_RUNNING_COUNTn(1)); -} - -static int __init mxs_clocksource_init(struct clk *timer_clk) -{ - unsigned int c = clk_get_rate(timer_clk); - - if (timrot_is_v1()) - clocksource_register_hz(&clocksource_mxs, c); - else { - clocksource_mmio_init(mxs_timrot_base + HW_TIMROT_RUNNING_COUNTn(1), - "mxs_timer", c, 200, 32, clocksource_mmio_readl_down); - setup_sched_clock(mxs_read_sched_clock_v2, 32, c); - } - - return 0; -} - -void __init mxs_timer_init(void) -{ - struct device_node *np; - struct clk *timer_clk; - int irq; - - np = of_find_compatible_node(NULL, NULL, "fsl,timrot"); - if (!np) { - pr_err("%s: failed find timrot node\n", __func__); - return; - } - - timer_clk = clk_get_sys("timrot", NULL); - if (IS_ERR(timer_clk)) { - pr_err("%s: failed to get clk\n", __func__); - return; - } - - clk_prepare_enable(timer_clk); - - /* - * Initialize timers to a known state - */ - mxs_reset_block(mxs_timrot_base + HW_TIMROT_ROTCTRL); - - /* get timrot version */ - timrot_major_version = __raw_readl(mxs_timrot_base + - (cpu_is_mx23() ? MX23_TIMROT_VERSION_OFFSET : - MX28_TIMROT_VERSION_OFFSET)); - timrot_major_version >>= BP_TIMROT_MAJOR_VERSION; - - /* one for clock_event */ - __raw_writel((timrot_is_v1() ? - BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL : - BV_TIMROTv2_TIMCTRLn_SELECT__TICK_ALWAYS) | - BM_TIMROT_TIMCTRLn_UPDATE | - BM_TIMROT_TIMCTRLn_IRQ_EN, - mxs_timrot_base + HW_TIMROT_TIMCTRLn(0)); - - /* another for clocksource */ - __raw_writel((timrot_is_v1() ? - BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL : - BV_TIMROTv2_TIMCTRLn_SELECT__TICK_ALWAYS) | - BM_TIMROT_TIMCTRLn_RELOAD, - mxs_timrot_base + HW_TIMROT_TIMCTRLn(1)); - - /* set clocksource timer fixed count to the maximum */ - if (timrot_is_v1()) - __raw_writel(0xffff, - mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1)); - else - __raw_writel(0xffffffff, - mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(1)); - - /* init and register the timer to the framework */ - mxs_clocksource_init(timer_clk); - mxs_clockevent_init(timer_clk); - - /* Make irqs happen */ - irq = irq_of_parse_and_map(np, 0); - setup_irq(irq, &mxs_timer_irq); -} diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig index 82226a5d60ef..9b9d105f194c 100644 --- a/arch/arm/mach-nomadik/Kconfig +++ b/arch/arm/mach-nomadik/Kconfig @@ -1,5 +1,24 @@ -if ARCH_NOMADIK +config ARCH_NOMADIK + bool "ST-Ericsson Nomadik" + depends on ARCH_MULTI_V5 + select ARCH_REQUIRE_GPIOLIB + select ARM_AMBA + select ARM_VIC + select CLKSRC_NOMADIK_MTU + select CLKSRC_NOMADIK_MTU_SCHED_CLOCK + select COMMON_CLK + select CPU_ARM926T + select GENERIC_CLOCKEVENTS + select MIGHT_HAVE_CACHE_L2X0 + select PINCTRL + select PINCTRL_NOMADIK + select PINCTRL_STN8815 + select SPARSE_IRQ + select USE_OF + help + Support for the Nomadik platform by ST-Ericsson +if ARCH_NOMADIK menu "Nomadik boards" config MACH_NOMADIK_8815NHK @@ -9,8 +28,8 @@ config MACH_NOMADIK_8815NHK select I2C_ALGOBIT endmenu +endif config NOMADIK_8815 + depends on ARCH_NOMADIK bool - -endif diff --git a/arch/arm/mach-nomadik/Makefile.boot b/arch/arm/mach-nomadik/Makefile.boot deleted file mode 100644 index ff0a4b5b0a82..000000000000 --- a/arch/arm/mach-nomadik/Makefile.boot +++ /dev/null @@ -1,4 +0,0 @@ - zreladdr-y += 0x00008000 -params_phys-y := 0x00000100 -initrd_phys-y := 0x00800000 - diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c index 21c1aa512640..59f6ff5c9bae 100644 --- a/arch/arm/mach-nomadik/cpu-8815.c +++ b/arch/arm/mach-nomadik/cpu-8815.c @@ -38,7 +38,6 @@ #include <linux/gpio.h> #include <linux/amba/mmci.h> -#include <mach/irqs.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/time.h> diff --git a/arch/arm/mach-nomadik/include/mach/irqs.h b/arch/arm/mach-nomadik/include/mach/irqs.h deleted file mode 100644 index 90ac965a92fe..000000000000 --- a/arch/arm/mach-nomadik/include/mach/irqs.h +++ /dev/null @@ -1,79 +0,0 @@ -/* - * mach-nomadik/include/mach/irqs.h - * - * Copyright (C) ST Microelectronics - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H - -#define IRQ_VIC_START 32 /* first VIC interrupt is 1 */ - -/* - * Interrupt numbers generic for all Nomadik Chip cuts - */ -#define IRQ_WATCHDOG (IRQ_VIC_START+0) -#define IRQ_SOFTINT (IRQ_VIC_START+1) -#define IRQ_CRYPTO (IRQ_VIC_START+2) -#define IRQ_OWM (IRQ_VIC_START+3) -#define IRQ_MTU0 (IRQ_VIC_START+4) -#define IRQ_MTU1 (IRQ_VIC_START+5) -#define IRQ_GPIO0 (IRQ_VIC_START+6) -#define IRQ_GPIO1 (IRQ_VIC_START+7) -#define IRQ_GPIO2 (IRQ_VIC_START+8) -#define IRQ_GPIO3 (IRQ_VIC_START+9) -#define IRQ_RTC_RTT (IRQ_VIC_START+10) -#define IRQ_SSP (IRQ_VIC_START+11) -#define IRQ_UART0 (IRQ_VIC_START+12) -#define IRQ_DMA1 (IRQ_VIC_START+13) -#define IRQ_CLCD_MDIF (IRQ_VIC_START+14) -#define IRQ_DMA0 (IRQ_VIC_START+15) -#define IRQ_PWRFAIL (IRQ_VIC_START+16) -#define IRQ_UART1 (IRQ_VIC_START+17) -#define IRQ_FIRDA (IRQ_VIC_START+18) -#define IRQ_MSP0 (IRQ_VIC_START+19) -#define IRQ_I2C0 (IRQ_VIC_START+20) -#define IRQ_I2C1 (IRQ_VIC_START+21) -#define IRQ_SDMMC (IRQ_VIC_START+22) -#define IRQ_USBOTG (IRQ_VIC_START+23) -#define IRQ_SVA_IT0 (IRQ_VIC_START+24) -#define IRQ_SVA_IT1 (IRQ_VIC_START+25) -#define IRQ_SAA_IT0 (IRQ_VIC_START+26) -#define IRQ_SAA_IT1 (IRQ_VIC_START+27) -#define IRQ_UART2 (IRQ_VIC_START+28) -#define IRQ_MSP2 (IRQ_VIC_START+29) -#define IRQ_L2CC (IRQ_VIC_START+30) -#define IRQ_HPI (IRQ_VIC_START+31) -#define IRQ_SKE (IRQ_VIC_START+32) -#define IRQ_KP (IRQ_VIC_START+33) -#define IRQ_MEMST (IRQ_VIC_START+34) -#define IRQ_SGA_IT (IRQ_VIC_START+35) -#define IRQ_USBM (IRQ_VIC_START+36) -#define IRQ_MSP1 (IRQ_VIC_START+37) - -#define NOMADIK_GPIO_OFFSET (IRQ_VIC_START+64) - -/* After chip-specific IRQ numbers we have the GPIO ones */ -#define NOMADIK_NR_GPIO 128 /* last 4 not wired to pins */ -#define NOMADIK_GPIO_TO_IRQ(gpio) ((gpio) + NOMADIK_GPIO_OFFSET) -#define NOMADIK_IRQ_TO_GPIO(irq) ((irq) - NOMADIK_GPIO_OFFSET) -#define NOMADIK_NR_IRQS NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO) - -/* Following two are used by entry_macro.S, to access our dual-vic */ -#define VIC_REG_IRQSR0 0 -#define VIC_REG_IRQSR1 0x20 - -#endif /* __ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-nomadik/include/mach/timex.h b/arch/arm/mach-nomadik/include/mach/timex.h deleted file mode 100644 index 318b8896ce96..000000000000 --- a/arch/arm/mach-nomadik/include/mach/timex.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -#define CLOCK_TICK_RATE 2400000 - -#endif diff --git a/arch/arm/mach-nomadik/include/mach/uncompress.h b/arch/arm/mach-nomadik/include/mach/uncompress.h deleted file mode 100644 index 106fccca2021..000000000000 --- a/arch/arm/mach-nomadik/include/mach/uncompress.h +++ /dev/null @@ -1,60 +0,0 @@ -/* - * Copyright (C) 2008 STMicroelectronics - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_UNCOMPRESS_H -#define __ASM_ARCH_UNCOMPRESS_H - -#include <asm/setup.h> -#include <asm/io.h> - -/* we need the constants in amba/serial.h, but it refers to amba_device */ -struct amba_device; -#include <linux/amba/serial.h> - -#define NOMADIK_UART_DR (void __iomem *)0x101FB000 -#define NOMADIK_UART_LCRH (void __iomem *)0x101FB02c -#define NOMADIK_UART_CR (void __iomem *)0x101FB030 -#define NOMADIK_UART_FR (void __iomem *)0x101FB018 - -static void putc(const char c) -{ - /* Do nothing if the UART is not enabled. */ - if (!(readb(NOMADIK_UART_CR) & UART01x_CR_UARTEN)) - return; - - if (c == '\n') - putc('\r'); - - while (readb(NOMADIK_UART_FR) & UART01x_FR_TXFF) - barrier(); - writeb(c, NOMADIK_UART_DR); -} - -static void flush(void) -{ - if (!(readb(NOMADIK_UART_CR) & UART01x_CR_UARTEN)) - return; - while (readb(NOMADIK_UART_FR) & UART01x_FR_BUSY) - barrier(); -} - -static inline void arch_decomp_setup(void) -{ -} - -#endif /* __ASM_ARCH_UNCOMPRESS_H */ diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index 903da8eb886c..cdd05f2e67ee 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -55,12 +55,6 @@ config MACH_OMAP_H3 TI OMAP 1710 H3 board support. Say Y here if you have such a board. -config MACH_OMAP_HTCWIZARD - bool "HTC Wizard" - depends on ARCH_OMAP850 - help - HTC Wizard smartphone support (AKA QTEK 9100, ...) - config MACH_HERALD bool "HTC Herald" depends on ARCH_OMAP850 diff --git a/arch/arm/mach-omap1/dma.h b/arch/arm/mach-omap1/dma.h index da6345dab03f..d05909c96715 100644 --- a/arch/arm/mach-omap1/dma.h +++ b/arch/arm/mach-omap1/dma.h @@ -21,21 +21,10 @@ /* DMA channels for omap1 */ #define OMAP_DMA_NO_DEVICE 0 -#define OMAP_DMA_MCSI1_TX 1 -#define OMAP_DMA_MCSI1_RX 2 -#define OMAP_DMA_I2C_RX 3 -#define OMAP_DMA_I2C_TX 4 -#define OMAP_DMA_EXT_NDMA_REQ 5 -#define OMAP_DMA_EXT_NDMA_REQ2 6 -#define OMAP_DMA_UWIRE_TX 7 #define OMAP_DMA_MCBSP1_TX 8 #define OMAP_DMA_MCBSP1_RX 9 #define OMAP_DMA_MCBSP3_TX 10 #define OMAP_DMA_MCBSP3_RX 11 -#define OMAP_DMA_UART1_TX 12 -#define OMAP_DMA_UART1_RX 13 -#define OMAP_DMA_UART2_TX 14 -#define OMAP_DMA_UART2_RX 15 #define OMAP_DMA_MCBSP2_TX 16 #define OMAP_DMA_MCBSP2_RX 17 #define OMAP_DMA_UART3_TX 18 @@ -43,41 +32,11 @@ #define OMAP_DMA_CAMERA_IF_RX 20 #define OMAP_DMA_MMC_TX 21 #define OMAP_DMA_MMC_RX 22 -#define OMAP_DMA_NAND 23 -#define OMAP_DMA_IRQ_LCD_LINE 24 -#define OMAP_DMA_MEMORY_STICK 25 #define OMAP_DMA_USB_W2FC_RX0 26 -#define OMAP_DMA_USB_W2FC_RX1 27 -#define OMAP_DMA_USB_W2FC_RX2 28 #define OMAP_DMA_USB_W2FC_TX0 29 -#define OMAP_DMA_USB_W2FC_TX1 30 -#define OMAP_DMA_USB_W2FC_TX2 31 /* These are only for 1610 */ -#define OMAP_DMA_CRYPTO_DES_IN 32 -#define OMAP_DMA_SPI_TX 33 -#define OMAP_DMA_SPI_RX 34 -#define OMAP_DMA_CRYPTO_HASH 35 -#define OMAP_DMA_CCP_ATTN 36 -#define OMAP_DMA_CCP_FIFO_NOT_EMPTY 37 -#define OMAP_DMA_CMT_APE_TX_CHAN_0 38 -#define OMAP_DMA_CMT_APE_RV_CHAN_0 39 -#define OMAP_DMA_CMT_APE_TX_CHAN_1 40 -#define OMAP_DMA_CMT_APE_RV_CHAN_1 41 -#define OMAP_DMA_CMT_APE_TX_CHAN_2 42 -#define OMAP_DMA_CMT_APE_RV_CHAN_2 43 -#define OMAP_DMA_CMT_APE_TX_CHAN_3 44 -#define OMAP_DMA_CMT_APE_RV_CHAN_3 45 -#define OMAP_DMA_CMT_APE_TX_CHAN_4 46 -#define OMAP_DMA_CMT_APE_RV_CHAN_4 47 -#define OMAP_DMA_CMT_APE_TX_CHAN_5 48 -#define OMAP_DMA_CMT_APE_RV_CHAN_5 49 -#define OMAP_DMA_CMT_APE_TX_CHAN_6 50 -#define OMAP_DMA_CMT_APE_RV_CHAN_6 51 -#define OMAP_DMA_CMT_APE_TX_CHAN_7 52 -#define OMAP_DMA_CMT_APE_RV_CHAN_7 53 #define OMAP_DMA_MMC2_TX 54 #define OMAP_DMA_MMC2_RX 55 -#define OMAP_DMA_CRYPTO_DES_OUT 56 #endif /* __OMAP1_DMA_CHANNEL_H */ diff --git a/arch/arm/mach-omap1/include/mach/usb.h b/arch/arm/mach-omap1/include/mach/usb.h index 753cd5ce6949..45e5ac707cbb 100644 --- a/arch/arm/mach-omap1/include/mach/usb.h +++ b/arch/arm/mach-omap1/include/mach/usb.h @@ -2,7 +2,7 @@ * FIXME correct answer depends on hmc_mode, * as does (on omap1) any nonzero value for config->otg port number */ -#ifdef CONFIG_USB_GADGET_OMAP +#if IS_ENABLED(CONFIG_USB_OMAP) #define is_usb0_device(config) 1 #else #define is_usb0_device(config) 0 diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index 7a7690ab6cb8..358b82cb9f78 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -37,12 +37,14 @@ #include <linux/suspend.h> #include <linux/sched.h> -#include <linux/proc_fs.h> +#include <linux/debugfs.h> +#include <linux/seq_file.h> #include <linux/interrupt.h> #include <linux/sysfs.h> #include <linux/module.h> #include <linux/io.h> #include <linux/atomic.h> +#include <linux/cpu.h> #include <asm/fncpy.h> #include <asm/system_misc.h> @@ -422,23 +424,12 @@ void omap1_pm_suspend(void) omap_rev()); } -#if defined(DEBUG) && defined(CONFIG_PROC_FS) -static int g_read_completed; - +#ifdef CONFIG_DEBUG_FS /* * Read system PM registers for debugging */ -static int omap_pm_read_proc( - char *page_buffer, - char **my_first_byte, - off_t virtual_start, - int length, - int *eof, - void *data) +static int omap_pm_debug_show(struct seq_file *m, void *v) { - int my_buffer_offset = 0; - char * const my_base = page_buffer; - ARM_SAVE(ARM_CKCTL); ARM_SAVE(ARM_IDLECT1); ARM_SAVE(ARM_IDLECT2); @@ -479,10 +470,7 @@ static int omap_pm_read_proc( MPUI1610_SAVE(EMIFS_CONFIG); } - if (virtual_start == 0) { - g_read_completed = 0; - - my_buffer_offset += sprintf(my_base + my_buffer_offset, + seq_printf(m, "ARM_CKCTL_REG: 0x%-8x \n" "ARM_IDLECT1_REG: 0x%-8x \n" "ARM_IDLECT2_REG: 0x%-8x \n" @@ -512,8 +500,8 @@ static int omap_pm_read_proc( ULPD_SHOW(ULPD_STATUS_REQ), ULPD_SHOW(ULPD_POWER_CTRL)); - if (cpu_is_omap7xx()) { - my_buffer_offset += sprintf(my_base + my_buffer_offset, + if (cpu_is_omap7xx()) { + seq_printf(m, "MPUI7XX_CTRL_REG 0x%-8x \n" "MPUI7XX_DSP_STATUS_REG: 0x%-8x \n" "MPUI7XX_DSP_BOOT_CONFIG_REG: 0x%-8x \n" @@ -526,8 +514,8 @@ static int omap_pm_read_proc( MPUI7XX_SHOW(MPUI_DSP_API_CONFIG), MPUI7XX_SHOW(EMIFF_SDRAM_CONFIG), MPUI7XX_SHOW(EMIFS_CONFIG)); - } else if (cpu_is_omap15xx()) { - my_buffer_offset += sprintf(my_base + my_buffer_offset, + } else if (cpu_is_omap15xx()) { + seq_printf(m, "MPUI1510_CTRL_REG 0x%-8x \n" "MPUI1510_DSP_STATUS_REG: 0x%-8x \n" "MPUI1510_DSP_BOOT_CONFIG_REG: 0x%-8x \n" @@ -540,8 +528,8 @@ static int omap_pm_read_proc( MPUI1510_SHOW(MPUI_DSP_API_CONFIG), MPUI1510_SHOW(EMIFF_SDRAM_CONFIG), MPUI1510_SHOW(EMIFS_CONFIG)); - } else if (cpu_is_omap16xx()) { - my_buffer_offset += sprintf(my_base + my_buffer_offset, + } else if (cpu_is_omap16xx()) { + seq_printf(m, "MPUI1610_CTRL_REG 0x%-8x \n" "MPUI1610_DSP_STATUS_REG: 0x%-8x \n" "MPUI1610_DSP_BOOT_CONFIG_REG: 0x%-8x \n" @@ -554,28 +542,37 @@ static int omap_pm_read_proc( MPUI1610_SHOW(MPUI_DSP_API_CONFIG), MPUI1610_SHOW(EMIFF_SDRAM_CONFIG), MPUI1610_SHOW(EMIFS_CONFIG)); - } - - g_read_completed++; - } else if (g_read_completed >= 1) { - *eof = 1; - return 0; } - g_read_completed++; - *my_first_byte = page_buffer; - return my_buffer_offset; + return 0; } -static void omap_pm_init_proc(void) +static int omap_pm_debug_open(struct inode *inode, struct file *file) { - /* XXX Appears to leak memory */ - create_proc_read_entry("driver/omap_pm", - S_IWUSR | S_IRUGO, NULL, - omap_pm_read_proc, NULL); + return single_open(file, omap_pm_debug_show, + &inode->i_private); } -#endif /* DEBUG && CONFIG_PROC_FS */ +static const struct file_operations omap_pm_debug_fops = { + .open = omap_pm_debug_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static void omap_pm_init_debugfs(void) +{ + struct dentry *d; + + d = debugfs_create_dir("pm_debug", NULL); + if (!d) + return; + + (void) debugfs_create_file("omap_pm", S_IWUSR | S_IRUGO, + d, NULL, &omap_pm_debug_fops); +} + +#endif /* CONFIG_DEBUG_FS */ /* * omap_pm_prepare - Do preliminary suspend work. @@ -584,8 +581,7 @@ static void omap_pm_init_proc(void) static int omap_pm_prepare(void) { /* We cannot sleep in idle until we have resumed */ - disable_hlt(); - + cpu_idle_poll_ctrl(true); return 0; } @@ -621,7 +617,7 @@ static int omap_pm_enter(suspend_state_t state) static void omap_pm_finish(void) { - enable_hlt(); + cpu_idle_poll_ctrl(false); } @@ -701,8 +697,8 @@ static int __init omap_pm_init(void) suspend_set_ops(&omap_pm_ops); -#if defined(DEBUG) && defined(CONFIG_PROC_FS) - omap_pm_init_proc(); +#ifdef CONFIG_DEBUG_FS + omap_pm_init_debugfs(); #endif #ifdef CONFIG_OMAP_32K_TIMER diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c index 1a1db5971cd9..4118db50d5e8 100644 --- a/arch/arm/mach-omap1/usb.c +++ b/arch/arm/mach-omap1/usb.c @@ -123,7 +123,7 @@ omap_otg_init(struct omap_usb_config *config) syscon = omap_readl(OTG_SYSCON_1); syscon |= HST_IDLE_EN|DEV_IDLE_EN|OTG_IDLE_EN; -#ifdef CONFIG_USB_GADGET_OMAP +#if IS_ENABLED(CONFIG_USB_OMAP) if (config->otg || config->register_dev) { struct platform_device *udc_device = config->udc_device; int status; @@ -169,7 +169,7 @@ omap_otg_init(struct omap_usb_config *config) void omap_otg_init(struct omap_usb_config *config) {} #endif -#ifdef CONFIG_USB_GADGET_OMAP +#if IS_ENABLED(CONFIG_USB_OMAP) static struct resource udc_resources[] = { /* order is significant! */ @@ -600,7 +600,7 @@ static void __init omap_1510_usb_init(struct omap_usb_config *config) while (!(omap_readw(ULPD_DPLL_CTRL) & DPLL_LOCK)) cpu_relax(); -#ifdef CONFIG_USB_GADGET_OMAP +#if IS_ENABLED(CONFIG_USB_OMAP) if (config->register_dev) { int status; diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 8111cd9ff3e5..857b1f097fd8 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -15,6 +15,7 @@ config ARCH_OMAP2PLUS select OMAP_DM_TIMER select PINCTRL select PROC_DEVICETREE if PROC_FS + select SOC_BUS select SPARSE_IRQ select USE_OF help @@ -55,6 +56,7 @@ config SOC_HAS_REALTIME_COUNTER config ARCH_OMAP2 bool "TI OMAP2" depends on ARCH_OMAP2PLUS + depends on ARCH_MULTI_V6 default y select CPU_V6 select MULTI_IRQ_HANDLER @@ -64,6 +66,7 @@ config ARCH_OMAP2 config ARCH_OMAP3 bool "TI OMAP3" depends on ARCH_OMAP2PLUS + depends on ARCH_MULTI_V7 default y select ARCH_HAS_OPP select ARM_CPU_SUSPEND if PM @@ -80,6 +83,7 @@ config ARCH_OMAP4 bool "TI OMAP4" default y depends on ARCH_OMAP2PLUS + depends on ARCH_MULTI_V7 select ARCH_HAS_OPP select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP select ARM_CPU_SUSPEND if PM @@ -87,6 +91,8 @@ config ARCH_OMAP4 select ARM_GIC select CACHE_L2X0 select CPU_V7 + select HAVE_ARM_SCU if SMP + select HAVE_ARM_TWD if LOCAL_TIMERS select HAVE_SMP select LOCAL_TIMERS if SMP select OMAP_INTERCONNECT @@ -96,9 +102,12 @@ config ARCH_OMAP4 select PM_RUNTIME if CPU_IDLE select USB_ARCH_HAS_EHCI if USB_SUPPORT select COMMON_CLK + select ARM_ERRATA_754322 + select ARM_ERRATA_775420 config SOC_OMAP5 bool "TI OMAP5" + depends on ARCH_MULTI_V7 select ARM_CPU_SUSPEND if PM select ARM_GIC select CPU_V7 @@ -135,6 +144,7 @@ config SOC_TI81XX config SOC_AM33XX bool "AM33XX support" + depends on ARCH_MULTI_V7 default y select ARM_CPU_SUSPEND if PM select CPU_V7 @@ -408,7 +418,7 @@ config OMAP3_SDRC_AC_TIMING config OMAP4_ERRATA_I688 bool "OMAP4 errata: Async Bridge Corruption" - depends on ARCH_OMAP4 && !ARCH_MULTIPLATFORM + depends on (ARCH_OMAP4 || SOC_OMAP5) && !ARCH_MULTIPLATFORM select ARCH_HAS_BARRIERS help If a data is stalled inside asynchronous bridge because of back diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index b068b7fe99ef..62bb352c2d37 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -229,7 +229,6 @@ obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o -obj-$(CONFIG_MACH_ENCORE) += board-omap3encore.o obj-$(CONFIG_MACH_OVERO) += board-overo.o obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o @@ -255,8 +254,6 @@ obj-$(CONFIG_MACH_TOUCHBOOK) += board-omap3touchbook.o obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o obj-$(CONFIG_MACH_OMAP4_PANDA) += board-omap4panda.o -obj-$(CONFIG_MACH_PCM049) += board-omap4pcm049.o - obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o obj-$(CONFIG_MACH_CRANEBOARD) += board-am3517crane.o diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index a3e0aaa4886b..244d8a5aa54b 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -38,7 +38,7 @@ #include "gpmc-smc91x.h" #include <video/omapdss.h> -#include <video/omap-panel-generic-dpi.h> +#include <video/omap-panel-data.h> #include "mux.h" #include "hsmmc.h" @@ -108,24 +108,13 @@ static struct platform_device *sdp2430_devices[] __initdata = { #define SDP2430_LCD_PANEL_BACKLIGHT_GPIO 91 #define SDP2430_LCD_PANEL_ENABLE_GPIO 154 -static int sdp2430_panel_enable_lcd(struct omap_dss_device *dssdev) -{ - gpio_direction_output(SDP2430_LCD_PANEL_ENABLE_GPIO, 1); - gpio_direction_output(SDP2430_LCD_PANEL_BACKLIGHT_GPIO, 1); - - return 0; -} - -static void sdp2430_panel_disable_lcd(struct omap_dss_device *dssdev) -{ - gpio_direction_output(SDP2430_LCD_PANEL_ENABLE_GPIO, 0); - gpio_direction_output(SDP2430_LCD_PANEL_BACKLIGHT_GPIO, 0); -} - static struct panel_generic_dpi_data sdp2430_panel_data = { .name = "nec_nl2432dr22-11b", - .platform_enable = sdp2430_panel_enable_lcd, - .platform_disable = sdp2430_panel_disable_lcd, + .num_gpios = 2, + .gpios = { + SDP2430_LCD_PANEL_ENABLE_GPIO, + SDP2430_LCD_PANEL_BACKLIGHT_GPIO, + }, }; static struct omap_dss_device sdp2430_lcd_device = { @@ -146,27 +135,7 @@ static struct omap_dss_board_info sdp2430_dss_data = { .default_device = &sdp2430_lcd_device, }; -static void __init sdp2430_display_init(void) -{ - int r; - - static struct gpio gpios[] __initdata = { - { SDP2430_LCD_PANEL_ENABLE_GPIO, GPIOF_OUT_INIT_LOW, - "LCD reset" }, - { SDP2430_LCD_PANEL_BACKLIGHT_GPIO, GPIOF_OUT_INIT_LOW, - "LCD Backlight" }, - }; - - r = gpio_request_array(gpios, ARRAY_SIZE(gpios)); - if (r) { - pr_err("Cannot request LCD GPIOs, error %d\n", r); - return; - } - - omap_display_init(&sdp2430_dss_data); -} - -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91x_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) static struct omap_smc91x_platform_data board_smc91x_data = { .cs = 5, @@ -273,7 +242,7 @@ static void __init omap_2430sdp_init(void) gpio_request_one(SECONDARY_LCD_GPIO, GPIOF_OUT_INIT_LOW, "Secondary LCD backlight"); - sdp2430_display_init(); + omap_display_init(&sdp2430_dss_data); } MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board") diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index ce812decfaca..23b004afa3f8 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -35,7 +35,7 @@ #include "common.h" #include <linux/omap-dma.h> #include <video/omapdss.h> -#include <video/omap-panel-tfp410.h> +#include <video/omap-panel-data.h> #include "gpmc.h" #include "gpmc-smc91x.h" @@ -108,53 +108,38 @@ static struct twl4030_keypad_data sdp3430_kp_data = { #define SDP3430_LCD_PANEL_BACKLIGHT_GPIO 8 #define SDP3430_LCD_PANEL_ENABLE_GPIO 5 -static struct gpio sdp3430_dss_gpios[] __initdata = { - {SDP3430_LCD_PANEL_ENABLE_GPIO, GPIOF_OUT_INIT_LOW, "LCD reset" }, - {SDP3430_LCD_PANEL_BACKLIGHT_GPIO, GPIOF_OUT_INIT_LOW, "LCD Backlight"}, -}; - static void __init sdp3430_display_init(void) { int r; - r = gpio_request_array(sdp3430_dss_gpios, - ARRAY_SIZE(sdp3430_dss_gpios)); + /* + * the backlight GPIO doesn't directly go to the panel, it enables + * an internal circuit on 3430sdp to create the signal V_BKL_28V, + * this is connected to LED+ pin of the sharp panel. This GPIO + * is left enabled in the board file, and not passed to the panel + * as platform_data. + */ + r = gpio_request_one(SDP3430_LCD_PANEL_BACKLIGHT_GPIO, + GPIOF_OUT_INIT_HIGH, "LCD Backlight"); if (r) - printk(KERN_ERR "failed to get LCD control GPIOs\n"); - -} - -static int sdp3430_panel_enable_lcd(struct omap_dss_device *dssdev) -{ - gpio_direction_output(SDP3430_LCD_PANEL_ENABLE_GPIO, 1); - gpio_direction_output(SDP3430_LCD_PANEL_BACKLIGHT_GPIO, 1); + pr_err("failed to get LCD Backlight GPIO\n"); - return 0; -} - -static void sdp3430_panel_disable_lcd(struct omap_dss_device *dssdev) -{ - gpio_direction_output(SDP3430_LCD_PANEL_ENABLE_GPIO, 0); - gpio_direction_output(SDP3430_LCD_PANEL_BACKLIGHT_GPIO, 0); -} - -static int sdp3430_panel_enable_tv(struct omap_dss_device *dssdev) -{ - return 0; -} - -static void sdp3430_panel_disable_tv(struct omap_dss_device *dssdev) -{ } +static struct panel_sharp_ls037v7dw01_data sdp3430_lcd_data = { + .resb_gpio = SDP3430_LCD_PANEL_ENABLE_GPIO, + .ini_gpio = -1, + .mo_gpio = -1, + .lr_gpio = -1, + .ud_gpio = -1, +}; static struct omap_dss_device sdp3430_lcd_device = { .name = "lcd", .driver_name = "sharp_ls_panel", .type = OMAP_DISPLAY_TYPE_DPI, .phy.dpi.data_lines = 16, - .platform_enable = sdp3430_panel_enable_lcd, - .platform_disable = sdp3430_panel_disable_lcd, + .data = &sdp3430_lcd_data, }; static struct tfp410_platform_data dvi_panel = { @@ -175,8 +160,6 @@ static struct omap_dss_device sdp3430_tv_device = { .driver_name = "venc", .type = OMAP_DISPLAY_TYPE_VENC, .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, - .platform_enable = sdp3430_panel_enable_tv, - .platform_disable = sdp3430_panel_disable_tv, }; @@ -445,16 +428,23 @@ static void enable_board_wakeup_source(void) OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP); } +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 1, + .reset_gpio = 57, + .vcc_gpio = -EINVAL, + }, + { + .port = 2, + .reset_gpio = 61, + .vcc_gpio = -EINVAL, + }, +}; + static struct usbhs_omap_platform_data usbhs_bdata __initdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = 57, - .reset_gpio_port[1] = 61, - .reset_gpio_port[2] = -EINVAL }; #ifdef CONFIG_OMAP_MUX @@ -606,6 +596,8 @@ static void __init omap_3430sdp_init(void) board_flash_init(sdp_flash_partitions, chip_sel_3430, 0); sdp3430_display_init(); enable_board_wakeup_source(); + + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&usbhs_bdata); } diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c index 67447bd4564f..20d6d8189240 100644 --- a/arch/arm/mach-omap2/board-3630sdp.c +++ b/arch/arm/mach-omap2/board-3630sdp.c @@ -53,16 +53,23 @@ static void enable_board_wakeup_source(void) OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP); } +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 1, + .reset_gpio = 126, + .vcc_gpio = -EINVAL, + }, + { + .port = 2, + .reset_gpio = 61, + .vcc_gpio = -EINVAL, + }, +}; + static struct usbhs_omap_platform_data usbhs_bdata __initdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = 126, - .reset_gpio_port[1] = 61, - .reset_gpio_port[2] = -EINVAL }; #ifdef CONFIG_OMAP_MUX @@ -199,6 +206,8 @@ static void __init omap_sdp_init(void) board_smc91x_init(); board_flash_init(sdp_flash_partitions, chip_sel_sdp, NAND_BUSWIDTH_16); enable_board_wakeup_source(); + + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&usbhs_bdata); } diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 35f3ad0cb7c7..56a9a4f855c7 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -291,6 +291,10 @@ static struct platform_device sdp4430_leds_pwm = { }, }; +/* Dummy regulator for pwm-backlight driver */ +static struct regulator_consumer_supply backlight_supply = + REGULATOR_SUPPLY("enable", "pwm-backlight"); + static struct platform_pwm_backlight_data sdp4430_backlight_data = { .max_brightness = 127, .dft_brightness = 127, @@ -718,13 +722,15 @@ static void __init omap_4430sdp_init(void) omap4_i2c_init(); omap_sfh7741prox_init(); + regulator_register_always_on(0, "backlight-enable", + &backlight_supply, 1, 0); platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices)); omap_serial_init(); omap_sdrc_init(NULL, NULL); omap4_sdp4430_wifi_init(); omap4_twl6030_hsmmc_init(mmc); - usb_bind_phy("musb-hdrc.0.auto", 0, "omap-usb2.1.auto"); + usb_bind_phy("musb-hdrc.2.auto", 0, "omap-usb2.3.auto"); usb_musb_init(&musb_board_data); status = omap_ethernet_init(); diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c index 7d3358b2e593..fc53911d0d13 100644 --- a/arch/arm/mach-omap2/board-am3517crane.c +++ b/arch/arm/mach-omap2/board-am3517crane.c @@ -47,15 +47,17 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 1, + .reset_gpio = GPIO_USB_NRESET, + .vcc_gpio = GPIO_USB_POWER, + .vcc_polarity = 1, + }, +}; + static struct usbhs_omap_platform_data usbhs_bdata __initdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = GPIO_USB_NRESET, - .reset_gpio_port[1] = -EINVAL, - .reset_gpio_port[2] = -EINVAL }; static struct mtd_partition crane_nand_partitions[] = { @@ -131,13 +133,7 @@ static void __init am3517_crane_init(void) return; } - ret = gpio_request_one(GPIO_USB_POWER, GPIOF_OUT_INIT_HIGH, - "usb_ehci_enable"); - if (ret < 0) { - pr_err("Can not request GPIO %d\n", GPIO_USB_POWER); - return; - } - + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&usbhs_bdata); am35xx_emac_init(AM35XX_DEFAULT_MDIO_FREQUENCY, 1); } diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index 9fb85908a61e..d63f14b534b5 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -35,8 +35,7 @@ #include "common.h" #include <video/omapdss.h> -#include <video/omap-panel-generic-dpi.h> -#include <video/omap-panel-tfp410.h> +#include <video/omap-panel-data.h> #include "am35xx-emac.h" #include "mux.h" @@ -121,63 +120,14 @@ static int __init am3517_evm_i2c_init(void) return 0; } -static int lcd_enabled; -static int dvi_enabled; - -#if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \ - defined(CONFIG_PANEL_SHARP_LQ043T1DG01_MODULE) -static struct gpio am3517_evm_dss_gpios[] __initdata = { - /* GPIO 182 = LCD Backlight Power */ - { LCD_PANEL_BKLIGHT_PWR, GPIOF_OUT_INIT_HIGH, "lcd_backlight_pwr" }, - /* GPIO 181 = LCD Panel PWM */ - { LCD_PANEL_PWM, GPIOF_OUT_INIT_HIGH, "lcd bl enable" }, - /* GPIO 176 = LCD Panel Power enable pin */ - { LCD_PANEL_PWR, GPIOF_OUT_INIT_HIGH, "dvi enable" }, -}; - -static void __init am3517_evm_display_init(void) -{ - int r; - - omap_mux_init_gpio(LCD_PANEL_PWR, OMAP_PIN_INPUT_PULLUP); - omap_mux_init_gpio(LCD_PANEL_BKLIGHT_PWR, OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_gpio(LCD_PANEL_PWM, OMAP_PIN_INPUT_PULLDOWN); - - r = gpio_request_array(am3517_evm_dss_gpios, - ARRAY_SIZE(am3517_evm_dss_gpios)); - if (r) { - printk(KERN_ERR "failed to get DSS panel control GPIOs\n"); - return; - } - - printk(KERN_INFO "Display initialized successfully\n"); -} -#else -static void __init am3517_evm_display_init(void) {} -#endif - -static int am3517_evm_panel_enable_lcd(struct omap_dss_device *dssdev) -{ - if (dvi_enabled) { - printk(KERN_ERR "cannot enable LCD, DVI is enabled\n"); - return -EINVAL; - } - gpio_set_value(LCD_PANEL_PWR, 1); - lcd_enabled = 1; - - return 0; -} - -static void am3517_evm_panel_disable_lcd(struct omap_dss_device *dssdev) -{ - gpio_set_value(LCD_PANEL_PWR, 0); - lcd_enabled = 0; -} - static struct panel_generic_dpi_data lcd_panel = { .name = "sharp_lq", - .platform_enable = am3517_evm_panel_enable_lcd, - .platform_disable = am3517_evm_panel_disable_lcd, + .num_gpios = 3, + .gpios = { + LCD_PANEL_PWR, + LCD_PANEL_BKLIGHT_PWR, + LCD_PANEL_PWM, + }, }; static struct omap_dss_device am3517_evm_lcd_device = { @@ -188,22 +138,11 @@ static struct omap_dss_device am3517_evm_lcd_device = { .phy.dpi.data_lines = 16, }; -static int am3517_evm_panel_enable_tv(struct omap_dss_device *dssdev) -{ - return 0; -} - -static void am3517_evm_panel_disable_tv(struct omap_dss_device *dssdev) -{ -} - static struct omap_dss_device am3517_evm_tv_device = { .type = OMAP_DISPLAY_TYPE_VENC, .name = "tv", .driver_name = "venc", .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, - .platform_enable = am3517_evm_panel_enable_tv, - .platform_disable = am3517_evm_panel_disable_tv, }; static struct tfp410_platform_data dvi_panel = { @@ -274,6 +213,14 @@ static __init void am3517_evm_mcbsp1_init(void) omap_ctrl_writel(devconf0, OMAP2_CONTROL_DEVCONF0); } +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 1, + .reset_gpio = 57, + .vcc_gpio = -EINVAL, + }, +}; + static struct usbhs_omap_platform_data usbhs_bdata __initdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, #if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \ @@ -282,12 +229,6 @@ static struct usbhs_omap_platform_data usbhs_bdata __initdata = { #else .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, #endif - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = 57, - .reset_gpio_port[1] = -EINVAL, - .reset_gpio_port[2] = -EINVAL }; #ifdef CONFIG_OMAP_MUX @@ -349,7 +290,6 @@ static struct omap2_hsmmc_info mmc[] = { {} /* Terminator */ }; - static void __init am3517_evm_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); @@ -361,10 +301,10 @@ static void __init am3517_evm_init(void) /* Configure GPIO for EHCI port */ omap_mux_init_gpio(57, OMAP_PIN_OUTPUT); + + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&usbhs_bdata); am3517_evm_hecc_init(&am3517_evm_hecc_pdata); - /* DSS */ - am3517_evm_display_init(); /* RTC - S35390A */ am3517_evm_rtc_init(); diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index af2bb219e214..ee6218c74807 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -41,8 +41,7 @@ #include <linux/platform_data/mtd-nand-omap2.h> #include <video/omapdss.h> -#include <video/omap-panel-generic-dpi.h> -#include <video/omap-panel-tfp410.h> +#include <video/omap-panel-data.h> #include <linux/platform_data/spi-omap2-mcspi.h> #include "common.h" @@ -191,45 +190,12 @@ static inline void cm_t35_init_nand(void) {} #define CM_T35_LCD_BL_GPIO 58 #define CM_T35_DVI_EN_GPIO 54 -static int lcd_enabled; -static int dvi_enabled; - -static int cm_t35_panel_enable_lcd(struct omap_dss_device *dssdev) -{ - if (dvi_enabled) { - printk(KERN_ERR "cannot enable LCD, DVI is enabled\n"); - return -EINVAL; - } - - gpio_set_value(CM_T35_LCD_EN_GPIO, 1); - gpio_set_value(CM_T35_LCD_BL_GPIO, 1); - - lcd_enabled = 1; - - return 0; -} - -static void cm_t35_panel_disable_lcd(struct omap_dss_device *dssdev) -{ - lcd_enabled = 0; - - gpio_set_value(CM_T35_LCD_BL_GPIO, 0); - gpio_set_value(CM_T35_LCD_EN_GPIO, 0); -} - -static int cm_t35_panel_enable_tv(struct omap_dss_device *dssdev) -{ - return 0; -} - -static void cm_t35_panel_disable_tv(struct omap_dss_device *dssdev) -{ -} - static struct panel_generic_dpi_data lcd_panel = { .name = "toppoly_tdo35s", - .platform_enable = cm_t35_panel_enable_lcd, - .platform_disable = cm_t35_panel_disable_lcd, + .num_gpios = 1, + .gpios = { + CM_T35_LCD_BL_GPIO, + }, }; static struct omap_dss_device cm_t35_lcd_device = { @@ -258,8 +224,6 @@ static struct omap_dss_device cm_t35_tv_device = { .driver_name = "venc", .type = OMAP_DISPLAY_TYPE_VENC, .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, - .platform_enable = cm_t35_panel_enable_tv, - .platform_disable = cm_t35_panel_disable_tv, }; static struct omap_dss_device *cm_t35_dss_devices[] = { @@ -293,11 +257,6 @@ static struct spi_board_info cm_t35_lcd_spi_board_info[] __initdata = { }, }; -static struct gpio cm_t35_dss_gpios[] __initdata = { - { CM_T35_LCD_EN_GPIO, GPIOF_OUT_INIT_LOW, "lcd enable" }, - { CM_T35_LCD_BL_GPIO, GPIOF_OUT_INIT_LOW, "lcd bl enable" }, -}; - static void __init cm_t35_init_display(void) { int err; @@ -305,23 +264,21 @@ static void __init cm_t35_init_display(void) spi_register_board_info(cm_t35_lcd_spi_board_info, ARRAY_SIZE(cm_t35_lcd_spi_board_info)); - err = gpio_request_array(cm_t35_dss_gpios, - ARRAY_SIZE(cm_t35_dss_gpios)); + + err = gpio_request_one(CM_T35_LCD_EN_GPIO, GPIOF_OUT_INIT_LOW, + "lcd bl enable"); if (err) { - pr_err("CM-T35: failed to request DSS control GPIOs\n"); + pr_err("CM-T35: failed to request LCD EN GPIO\n"); return; } - gpio_export(CM_T35_LCD_EN_GPIO, 0); - gpio_export(CM_T35_LCD_BL_GPIO, 0); - msleep(50); gpio_set_value(CM_T35_LCD_EN_GPIO, 1); err = omap_display_init(&cm_t35_dss_data); if (err) { pr_err("CM-T35: failed to register DSS device\n"); - gpio_free_array(cm_t35_dss_gpios, ARRAY_SIZE(cm_t35_dss_gpios)); + gpio_free(CM_T35_LCD_EN_GPIO); } } @@ -419,15 +376,22 @@ static struct omap2_hsmmc_info mmc[] = { {} /* Terminator */ }; +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 1, + .reset_gpio = OMAP_MAX_GPIO_LINES + 6, + .vcc_gpio = -EINVAL, + }, + { + .port = 2, + .reset_gpio = OMAP_MAX_GPIO_LINES + 7, + .vcc_gpio = -EINVAL, + }, +}; + static struct usbhs_omap_platform_data usbhs_bdata __initdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = OMAP_MAX_GPIO_LINES + 6, - .reset_gpio_port[1] = OMAP_MAX_GPIO_LINES + 7, - .reset_gpio_port[2] = -EINVAL }; static void __init cm_t35_init_usbh(void) @@ -444,6 +408,7 @@ static void __init cm_t35_init_usbh(void) msleep(1); } + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&usbhs_bdata); } diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c index a66da808cc4a..4eb5e6f2f7f5 100644 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ b/arch/arm/mach-omap2/board-cm-t3517.c @@ -188,15 +188,22 @@ static inline void cm_t3517_init_rtc(void) {} #define HSUSB2_RESET_GPIO (147) #define USB_HUB_RESET_GPIO (152) +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 1, + .reset_gpio = HSUSB1_RESET_GPIO, + .vcc_gpio = -EINVAL, + }, + { + .port = 2, + .reset_gpio = HSUSB2_RESET_GPIO, + .vcc_gpio = -EINVAL, + }, +}; + static struct usbhs_omap_platform_data cm_t3517_ehci_pdata __initdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = HSUSB1_RESET_GPIO, - .reset_gpio_port[1] = HSUSB2_RESET_GPIO, - .reset_gpio_port[2] = -EINVAL, }; static int __init cm_t3517_init_usbh(void) @@ -213,6 +220,7 @@ static int __init cm_t3517_init_usbh(void) msleep(1); } + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&cm_t3517_ehci_pdata); return 0; @@ -324,6 +332,6 @@ MACHINE_START(CM_T3517, "Compulab CM-T3517") .handle_irq = omap3_intc_handle_irq, .init_machine = cm_t3517_init, .init_late = am35xx_init_late, - .init_time = omap3_gp_gptimer_timer_init, + .init_time = omap3_gptimer_timer_init, .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 53056c3b0836..576420544178 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -43,8 +43,7 @@ #include "gpmc.h" #include <linux/platform_data/mtd-nand-omap2.h> #include <video/omapdss.h> -#include <video/omap-panel-generic-dpi.h> -#include <video/omap-panel-tfp410.h> +#include <video/omap-panel-data.h> #include <linux/platform_data/spi-omap2-mcspi.h> #include <linux/input/matrix_keypad.h> @@ -104,19 +103,6 @@ static struct omap2_hsmmc_info mmc[] = { {} /* Terminator */ }; -static int devkit8000_panel_enable_lcd(struct omap_dss_device *dssdev) -{ - if (gpio_is_valid(dssdev->reset_gpio)) - gpio_set_value_cansleep(dssdev->reset_gpio, 1); - return 0; -} - -static void devkit8000_panel_disable_lcd(struct omap_dss_device *dssdev) -{ - if (gpio_is_valid(dssdev->reset_gpio)) - gpio_set_value_cansleep(dssdev->reset_gpio, 0); -} - static struct regulator_consumer_supply devkit8000_vmmc1_supply[] = { REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), }; @@ -128,8 +114,7 @@ static struct regulator_consumer_supply devkit8000_vio_supply[] = { static struct panel_generic_dpi_data lcd_panel = { .name = "innolux_at070tn83", - .platform_enable = devkit8000_panel_enable_lcd, - .platform_disable = devkit8000_panel_disable_lcd, + /* gpios filled in code */ }; static struct omap_dss_device devkit8000_lcd_device = { @@ -211,8 +196,6 @@ static struct gpio_led gpio_leds[]; static int devkit8000_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { - int ret; - /* gpio + 0 is "mmc0_cd" (input/IRQ) */ mmc[0].gpio_cd = gpio + 0; omap_hsmmc_late_init(mmc); @@ -221,13 +204,8 @@ static int devkit8000_twl_gpio_setup(struct device *dev, gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; /* TWL4030_GPIO_MAX + 0 is "LCD_PWREN" (out, active high) */ - devkit8000_lcd_device.reset_gpio = gpio + TWL4030_GPIO_MAX + 0; - ret = gpio_request_one(devkit8000_lcd_device.reset_gpio, - GPIOF_OUT_INIT_LOW, "LCD_PWREN"); - if (ret < 0) { - devkit8000_lcd_device.reset_gpio = -EINVAL; - printk(KERN_ERR "Failed to request GPIO for LCD_PWRN\n"); - } + lcd_panel.num_gpios = 1; + lcd_panel.gpios[0] = gpio + TWL4030_GPIO_MAX + 0; /* gpio + 7 is "DVI_PD" (out, active low) */ dvi_panel.power_down_gpio = gpio + 7; @@ -437,15 +415,7 @@ static struct platform_device *devkit8000_devices[] __initdata = { }; static struct usbhs_omap_platform_data usbhs_bdata __initdata = { - .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = -EINVAL, - .reset_gpio_port[2] = -EINVAL }; #ifdef CONFIG_OMAP_MUX diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index e54a48060198..88aa6b1835c3 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -110,6 +110,7 @@ MACHINE_END static const char *omap3_gp_boards_compat[] __initdata = { "ti,omap3-beagle", + "timll,omap3-devkit8000", NULL, }; @@ -140,7 +141,7 @@ DT_MACHINE_START(AM33XX_DT, "Generic AM33XX (Flattened Device Tree)") .init_irq = omap_intc_of_init, .handle_irq = omap3_intc_handle_irq, .init_machine = omap_generic_init, - .init_time = omap3_am33xx_gptimer_timer_init, + .init_time = omap3_gptimer_timer_init, .dt_compat = am33xx_boards_compat, .restart = am33xx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index 812c829fa46f..69c0acf5aa63 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -34,7 +34,7 @@ #include <asm/mach/map.h> #include <video/omapdss.h> -#include <video/omap-panel-generic-dpi.h> +#include <video/omap-panel-data.h> #include "common.h" #include "mux.h" @@ -246,7 +246,7 @@ static u32 is_gpmc_muxed(void) return 0; } -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91x_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) static struct omap_smc91x_platform_data board_smc91x_data = { .cs = 1, diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index bf92678a01d0..b54562d1235e 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -31,7 +31,7 @@ #include <asm/mach/arch.h> #include <video/omapdss.h> -#include <video/omap-panel-tfp410.h> +#include <video/omap-panel-data.h> #include <linux/platform_data/mtd-onenand-omap2.h> #include "common.h" @@ -527,26 +527,28 @@ static void __init igep_i2c_init(void) omap3_pmic_init("twl4030", &igep_twldata); } +static struct usbhs_phy_data igep2_phy_data[] __initdata = { + { + .port = 1, + .reset_gpio = IGEP2_GPIO_USBH_NRESET, + .vcc_gpio = -EINVAL, + }, +}; + +static struct usbhs_phy_data igep3_phy_data[] __initdata = { + { + .port = 2, + .reset_gpio = IGEP3_GPIO_USBH_NRESET, + .vcc_gpio = -EINVAL, + }, +}; + static struct usbhs_omap_platform_data igep2_usbhs_bdata __initdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = IGEP2_GPIO_USBH_NRESET, - .reset_gpio_port[1] = -EINVAL, - .reset_gpio_port[2] = -EINVAL, }; static struct usbhs_omap_platform_data igep3_usbhs_bdata __initdata = { - .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = IGEP3_GPIO_USBH_NRESET, - .reset_gpio_port[2] = -EINVAL, }; #ifdef CONFIG_OMAP_MUX @@ -642,8 +644,10 @@ static void __init igep_init(void) if (machine_is_igep0020()) { omap_display_init(&igep2_dss_data); igep2_init_smsc911x(); + usbhs_init_phys(igep2_phy_data, ARRAY_SIZE(igep2_phy_data)); usbhs_init(&igep2_usbhs_bdata); } else { + usbhs_init_phys(igep3_phy_data, ARRAY_SIZE(igep3_phy_data)); usbhs_init(&igep3_usbhs_bdata); } } diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index b12fe966a7b9..d0d17bc58d9b 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -41,7 +41,7 @@ #include "gpmc-smsc911x.h" #include <video/omapdss.h> -#include <video/omap-panel-generic-dpi.h> +#include <video/omap-panel-data.h> #include "board-flash.h" #include "mux.h" @@ -181,34 +181,13 @@ static inline void __init ldp_init_smsc911x(void) /* LCD */ -static int ldp_backlight_gpio; -static int ldp_lcd_enable_gpio; - #define LCD_PANEL_RESET_GPIO 55 #define LCD_PANEL_QVGA_GPIO 56 -static int ldp_panel_enable_lcd(struct omap_dss_device *dssdev) -{ - if (gpio_is_valid(ldp_lcd_enable_gpio)) - gpio_direction_output(ldp_lcd_enable_gpio, 1); - if (gpio_is_valid(ldp_backlight_gpio)) - gpio_direction_output(ldp_backlight_gpio, 1); - - return 0; -} - -static void ldp_panel_disable_lcd(struct omap_dss_device *dssdev) -{ - if (gpio_is_valid(ldp_lcd_enable_gpio)) - gpio_direction_output(ldp_lcd_enable_gpio, 0); - if (gpio_is_valid(ldp_backlight_gpio)) - gpio_direction_output(ldp_backlight_gpio, 0); -} - static struct panel_generic_dpi_data ldp_panel_data = { .name = "nec_nl2432dr22-11b", - .platform_enable = ldp_panel_enable_lcd, - .platform_disable = ldp_panel_disable_lcd, + .num_gpios = 4, + /* gpios filled in code */ }; static struct omap_dss_device ldp_lcd_device = { @@ -231,41 +210,19 @@ static struct omap_dss_board_info ldp_dss_data = { static void __init ldp_display_init(void) { - int r; - - static struct gpio gpios[] __initdata = { - {LCD_PANEL_RESET_GPIO, GPIOF_OUT_INIT_HIGH, "LCD RESET"}, - {LCD_PANEL_QVGA_GPIO, GPIOF_OUT_INIT_HIGH, "LCD QVGA"}, - }; - - r = gpio_request_array(gpios, ARRAY_SIZE(gpios)); - if (r) { - pr_err("Cannot request LCD GPIOs, error %d\n", r); - return; - } + ldp_panel_data.gpios[2] = LCD_PANEL_RESET_GPIO; + ldp_panel_data.gpios[3] = LCD_PANEL_QVGA_GPIO; omap_display_init(&ldp_dss_data); } static int ldp_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { - int r; - - struct gpio gpios[] = { - {gpio + 7 , GPIOF_OUT_INIT_LOW, "LCD ENABLE"}, - {gpio + 15, GPIOF_OUT_INIT_LOW, "LCD BACKLIGHT"}, - }; - - r = gpio_request_array(gpios, ARRAY_SIZE(gpios)); - if (r) { - pr_err("Cannot request LCD GPIOs, error %d\n", r); - ldp_backlight_gpio = -EINVAL; - ldp_lcd_enable_gpio = -EINVAL; - return r; - } - - ldp_backlight_gpio = gpio + 15; - ldp_lcd_enable_gpio = gpio + 7; + ldp_panel_data.gpios[0] = gpio + 7; + ldp_panel_data.gpio_invert[0] = true; + + ldp_panel_data.gpios[1] = gpio + 15; + ldp_panel_data.gpio_invert[1] = true; return 0; } diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index c3558f93d42c..6de78605c0af 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -33,6 +33,7 @@ #include <linux/mtd/nand.h> #include <linux/mmc/host.h> #include <linux/usb/phy.h> +#include <linux/usb/nop-usb-xceiv.h> #include <linux/regulator/machine.h> #include <linux/i2c/twl.h> @@ -43,7 +44,7 @@ #include <asm/mach/flash.h> #include <video/omapdss.h> -#include <video/omap-panel-tfp410.h> +#include <video/omap-panel-data.h> #include <linux/platform_data/mtd-nand-omap2.h> #include "common.h" @@ -277,6 +278,21 @@ static struct regulator_consumer_supply beagle_vsim_supply[] = { static struct gpio_led gpio_leds[]; +/* PHY's VCC regulator might be added later, so flag that we need it */ +static struct nop_usb_xceiv_platform_data hsusb2_phy_data = { + .needs_vcc = true, +}; + +static struct usbhs_phy_data phy_data[] = { + { + .port = 2, + .reset_gpio = 147, + .vcc_gpio = -1, /* updated in beagle_twl_gpio_setup */ + .vcc_polarity = 1, /* updated in beagle_twl_gpio_setup */ + .platform_data = &hsusb2_phy_data, + }, +}; + static int beagle_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { @@ -318,9 +334,11 @@ static int beagle_twl_gpio_setup(struct device *dev, } dvi_panel.power_down_gpio = beagle_config.dvi_pd_gpio; - gpio_request_one(gpio + TWL4030_GPIO_MAX, beagle_config.usb_pwr_level, - "nEN_USB_PWR"); + /* TWL4030_GPIO_MAX i.e. LED_GPO controls HS USB Port 2 power */ + phy_data[0].vcc_gpio = gpio + TWL4030_GPIO_MAX; + phy_data[0].vcc_polarity = beagle_config.usb_pwr_level; + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); return 0; } @@ -453,15 +471,7 @@ static struct platform_device *omap3_beagle_devices[] __initdata = { }; static struct usbhs_omap_platform_data usbhs_bdata __initdata = { - - .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = 147, - .reset_gpio_port[2] = -EINVAL }; #ifdef CONFIG_OMAP_MUX @@ -479,7 +489,7 @@ static int __init beagle_opp_init(void) /* Initialize the omap3 opp table if not already created. */ r = omap3_opp_init(); - if (IS_ERR_VALUE(r) && (r != -EEXIST)) { + if (r < 0 && (r != -EEXIST)) { pr_err("%s: opp default init failed\n", __func__); return r; } @@ -543,7 +553,9 @@ static void __init omap3_beagle_init(void) usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); usb_musb_init(NULL); + usbhs_init(&usbhs_bdata); + board_nand_init(omap3beagle_nand_partitions, ARRAY_SIZE(omap3beagle_nand_partitions), NAND_CS, NAND_BUSWIDTH_16, NULL); diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 48789e0bb915..f76d0de7b406 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -51,7 +51,7 @@ #include "common.h" #include <linux/platform_data/spi-omap2-mcspi.h> #include <video/omapdss.h> -#include <video/omap-panel-tfp410.h> +#include <video/omap-panel-data.h> #include "soc.h" #include "mux.h" @@ -155,61 +155,43 @@ static inline void __init omap3evm_init_smsc911x(void) { return; } #define OMAP3EVM_LCD_PANEL_LR 2 #define OMAP3EVM_LCD_PANEL_UD 3 #define OMAP3EVM_LCD_PANEL_INI 152 -#define OMAP3EVM_LCD_PANEL_ENVDD 153 #define OMAP3EVM_LCD_PANEL_QVGA 154 #define OMAP3EVM_LCD_PANEL_RESB 155 + +#define OMAP3EVM_LCD_PANEL_ENVDD 153 #define OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO 210 + +/* + * OMAP3EVM DVI control signals + */ #define OMAP3EVM_DVI_PANEL_EN_GPIO 199 -static struct gpio omap3_evm_dss_gpios[] __initdata = { - { OMAP3EVM_LCD_PANEL_RESB, GPIOF_OUT_INIT_HIGH, "lcd_panel_resb" }, - { OMAP3EVM_LCD_PANEL_INI, GPIOF_OUT_INIT_HIGH, "lcd_panel_ini" }, - { OMAP3EVM_LCD_PANEL_QVGA, GPIOF_OUT_INIT_LOW, "lcd_panel_qvga" }, - { OMAP3EVM_LCD_PANEL_LR, GPIOF_OUT_INIT_HIGH, "lcd_panel_lr" }, - { OMAP3EVM_LCD_PANEL_UD, GPIOF_OUT_INIT_HIGH, "lcd_panel_ud" }, - { OMAP3EVM_LCD_PANEL_ENVDD, GPIOF_OUT_INIT_LOW, "lcd_panel_envdd" }, +static struct panel_sharp_ls037v7dw01_data omap3_evm_lcd_data = { + .resb_gpio = OMAP3EVM_LCD_PANEL_RESB, + .ini_gpio = OMAP3EVM_LCD_PANEL_INI, + .mo_gpio = OMAP3EVM_LCD_PANEL_QVGA, + .lr_gpio = OMAP3EVM_LCD_PANEL_LR, + .ud_gpio = OMAP3EVM_LCD_PANEL_UD, }; -static int lcd_enabled; -static int dvi_enabled; - static void __init omap3_evm_display_init(void) { int r; - r = gpio_request_array(omap3_evm_dss_gpios, - ARRAY_SIZE(omap3_evm_dss_gpios)); + r = gpio_request_one(OMAP3EVM_LCD_PANEL_ENVDD, GPIOF_OUT_INIT_LOW, + "lcd_panel_envdd"); if (r) - printk(KERN_ERR "failed to get lcd_panel_* gpios\n"); -} + pr_err("failed to get lcd_panel_envdd GPIO\n"); -static int omap3_evm_enable_lcd(struct omap_dss_device *dssdev) -{ - if (dvi_enabled) { - printk(KERN_ERR "cannot enable LCD, DVI is enabled\n"); - return -EINVAL; - } - gpio_set_value(OMAP3EVM_LCD_PANEL_ENVDD, 0); + r = gpio_request_one(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, + GPIOF_OUT_INIT_LOW, "lcd_panel_bklight"); + if (r) + pr_err("failed to get lcd_panel_bklight GPIO\n"); if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 0); else gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 1); - - lcd_enabled = 1; - return 0; -} - -static void omap3_evm_disable_lcd(struct omap_dss_device *dssdev) -{ - gpio_set_value(OMAP3EVM_LCD_PANEL_ENVDD, 1); - - if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) - gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 1); - else - gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 0); - - lcd_enabled = 0; } static struct omap_dss_device omap3_evm_lcd_device = { @@ -217,26 +199,14 @@ static struct omap_dss_device omap3_evm_lcd_device = { .driver_name = "sharp_ls_panel", .type = OMAP_DISPLAY_TYPE_DPI, .phy.dpi.data_lines = 18, - .platform_enable = omap3_evm_enable_lcd, - .platform_disable = omap3_evm_disable_lcd, + .data = &omap3_evm_lcd_data, }; -static int omap3_evm_enable_tv(struct omap_dss_device *dssdev) -{ - return 0; -} - -static void omap3_evm_disable_tv(struct omap_dss_device *dssdev) -{ -} - static struct omap_dss_device omap3_evm_tv_device = { .name = "tv", .driver_name = "venc", .type = OMAP_DISPLAY_TYPE_VENC, .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, - .platform_enable = omap3_evm_enable_tv, - .platform_disable = omap3_evm_disable_tv, }; static struct tfp410_platform_data dvi_panel = { @@ -496,7 +466,7 @@ struct wl12xx_platform_data omap3evm_wlan_data __initdata = { static struct regulator_consumer_supply omap3evm_vaux2_supplies[] = { REGULATOR_SUPPLY("VDD_CSIPHY1", "omap3isp"), /* OMAP ISP */ REGULATOR_SUPPLY("VDD_CSIPHY2", "omap3isp"), /* OMAP ISP */ - REGULATOR_SUPPLY("hsusb1", "ehci-omap.0"), + REGULATOR_SUPPLY("vcc", "nop_usb_xceiv.2"), /* hsusb port 2 */ REGULATOR_SUPPLY("vaux2", NULL), }; @@ -539,17 +509,16 @@ static int __init omap3_evm_i2c_init(void) return 0; } -static struct usbhs_omap_platform_data usbhs_bdata __initdata = { +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 2, + .reset_gpio = -1, /* set at runtime */ + .vcc_gpio = -EINVAL, + }, +}; - .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, +static struct usbhs_omap_platform_data usbhs_bdata __initdata = { .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - /* PHY reset GPIO will be runtime programmed based on EVM version */ - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = -EINVAL, - .reset_gpio_port[2] = -EINVAL }; #ifdef CONFIG_OMAP_MUX @@ -725,7 +694,7 @@ static void __init omap3_evm_init(void) /* setup EHCI phy reset config */ omap_mux_init_gpio(21, OMAP_PIN_INPUT_PULLUP); - usbhs_bdata.reset_gpio_port[1] = 21; + phy_data[0].reset_gpio = 21; /* EVM REV >= E can supply 500mA with EXTVBUS programming */ musb_board_data.power = 500; @@ -733,10 +702,12 @@ static void __init omap3_evm_init(void) } else { /* setup EHCI phy reset on MDC */ omap_mux_init_gpio(135, OMAP_PIN_OUTPUT); - usbhs_bdata.reset_gpio_port[1] = 135; + phy_data[0].reset_gpio = 135; } usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); usb_musb_init(&musb_board_data); + + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&usbhs_bdata); board_nand_init(omap3evm_nand_partitions, ARRAY_SIZE(omap3evm_nand_partitions), NAND_CS, diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 2bba362148a0..28133d5b4fed 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -44,6 +44,7 @@ #include "common.h" #include <video/omapdss.h> +#include <video/omap-panel-data.h> #include <linux/platform_data/mtd-nand-omap2.h> #include "mux.h" @@ -230,12 +231,16 @@ static struct twl4030_keypad_data pandora_kp_data = { .rep = 1, }; +static struct panel_tpo_td043_data lcd_data = { + .nreset_gpio = 157, +}; + static struct omap_dss_device pandora_lcd_device = { .name = "lcd", .driver_name = "tpo_td043mtea1_panel", .type = OMAP_DISPLAY_TYPE_DPI, .phy.dpi.data_lines = 24, - .reset_gpio = 157, + .data = &lcd_data, }; static struct omap_dss_device pandora_tv_device = { @@ -346,7 +351,7 @@ static struct regulator_consumer_supply pandora_vcc_lcd_supply[] = { }; static struct regulator_consumer_supply pandora_usb_phy_supply[] = { - REGULATOR_SUPPLY("hsusb1", "ehci-omap.0"), + REGULATOR_SUPPLY("vcc", "nop_usb_xceiv.2"), /* hsusb port 2 */ }; /* ads7846 on SPI and 2 nub controllers on I2C */ @@ -561,6 +566,14 @@ fail: printk(KERN_ERR "wl1251 board initialisation failed\n"); } +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 2, + .reset_gpio = 16, + .vcc_gpio = -EINVAL, + }, +}; + static struct platform_device *omap3pandora_devices[] __initdata = { &pandora_leds_gpio, &pandora_keys_gpio, @@ -569,15 +582,7 @@ static struct platform_device *omap3pandora_devices[] __initdata = { }; static struct usbhs_omap_platform_data usbhs_bdata __initdata = { - - .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = 16, - .reset_gpio_port[2] = -EINVAL }; #ifdef CONFIG_OMAP_MUX @@ -601,7 +606,10 @@ static void __init omap3pandora_init(void) spi_register_board_info(omap3pandora_spi_board_info, ARRAY_SIZE(omap3pandora_spi_board_info)); omap_ads7846_init(1, OMAP3_PANDORA_TS_GPIO, 0, NULL); + + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&usbhs_bdata); + usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); usb_musb_init(NULL); gpmc_nand_init(&pandora_nand_data, NULL); diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index 95c10b3aa678..d37e6b187ae4 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -44,8 +44,7 @@ #include "gpmc.h" #include <linux/platform_data/mtd-nand-omap2.h> #include <video/omapdss.h> -#include <video/omap-panel-generic-dpi.h> -#include <video/omap-panel-tfp410.h> +#include <video/omap-panel-data.h> #include <linux/platform_data/spi-omap2-mcspi.h> @@ -95,15 +94,6 @@ static void __init omap3_stalker_display_init(void) return; } -static int omap3_stalker_enable_tv(struct omap_dss_device *dssdev) -{ - return 0; -} - -static void omap3_stalker_disable_tv(struct omap_dss_device *dssdev) -{ -} - static struct omap_dss_device omap3_stalker_tv_device = { .name = "tv", .driver_name = "venc", @@ -113,8 +103,6 @@ static struct omap_dss_device omap3_stalker_tv_device = { #elif defined(CONFIG_OMAP2_VENC_OUT_TYPE_COMPOSITE) .u.venc.type = OMAP_DSS_VENC_TYPE_COMPOSITE, #endif - .platform_enable = omap3_stalker_enable_tv, - .platform_disable = omap3_stalker_disable_tv, }; static struct tfp410_platform_data dvi_panel = { @@ -358,19 +346,20 @@ static int __init omap3_stalker_i2c_init(void) #define OMAP3_STALKER_TS_GPIO 175 +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 2, + .reset_gpio = 21, + .vcc_gpio = -EINVAL, + }, +}; + static struct platform_device *omap3_stalker_devices[] __initdata = { &keys_gpio, }; static struct usbhs_omap_platform_data usbhs_bdata __initdata = { - .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = 21, - .reset_gpio_port[2] = -EINVAL, }; #ifdef CONFIG_OMAP_MUX @@ -407,6 +396,8 @@ static void __init omap3_stalker_init(void) omap_sdrc_init(mt46h32m32lf6_sdrc_params, NULL); usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); usb_musb_init(NULL); + + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&usbhs_bdata); omap_ads7846_init(1, OMAP3_STALKER_TS_GPIO, 310, NULL); diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index bcd44fbcd877..7da48bc42bbf 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -305,21 +305,22 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 2, + .reset_gpio = 147, + .vcc_gpio = -EINVAL, + }, +}; + static struct platform_device *omap3_touchbook_devices[] __initdata = { &leds_gpio, &keys_gpio, }; static struct usbhs_omap_platform_data usbhs_bdata __initdata = { - .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = 147, - .reset_gpio_port[2] = -EINVAL }; static void omap3_touchbook_poweroff(void) @@ -368,6 +369,8 @@ static void __init omap3_touchbook_init(void) omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata); usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); usb_musb_init(NULL); + + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&usbhs_bdata); board_nand_init(omap3touchbook_nand_partitions, ARRAY_SIZE(omap3touchbook_nand_partitions), NAND_CS, diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index b02c2f00609b..1e2c75eee912 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -31,6 +31,7 @@ #include <linux/ti_wilink_st.h> #include <linux/usb/musb.h> #include <linux/usb/phy.h> +#include <linux/usb/nop-usb-xceiv.h> #include <linux/wl12xx.h> #include <linux/irqchip/arm-gic.h> #include <linux/platform_data/omap-abe-twl6040.h> @@ -132,6 +133,22 @@ static struct platform_device btwilink_device = { .id = -1, }; +/* PHY device on HS USB Port 1 i.e. nop_usb_xceiv.1 */ +static struct nop_usb_xceiv_platform_data hsusb1_phy_data = { + /* FREF_CLK3 provides the 19.2 MHz reference clock to the PHY */ + .clk_rate = 19200000, +}; + +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 1, + .reset_gpio = GPIO_HUB_NRESET, + .vcc_gpio = GPIO_HUB_POWER, + .vcc_polarity = 1, + .platform_data = &hsusb1_phy_data, + }, +}; + static struct platform_device *panda_devices[] __initdata = { &leds_gpio, &wl1271_device, @@ -142,49 +159,19 @@ static struct platform_device *panda_devices[] __initdata = { static struct usbhs_omap_platform_data usbhs_bdata __initdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - .phy_reset = false, - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = -EINVAL, - .reset_gpio_port[2] = -EINVAL -}; - -static struct gpio panda_ehci_gpios[] __initdata = { - { GPIO_HUB_POWER, GPIOF_OUT_INIT_LOW, "hub_power" }, - { GPIO_HUB_NRESET, GPIOF_OUT_INIT_LOW, "hub_nreset" }, }; static void __init omap4_ehci_init(void) { int ret; - struct clk *phy_ref_clk; /* FREF_CLK3 provides the 19.2 MHz reference clock to the PHY */ - phy_ref_clk = clk_get(NULL, "auxclk3_ck"); - if (IS_ERR(phy_ref_clk)) { - pr_err("Cannot request auxclk3\n"); - return; - } - clk_set_rate(phy_ref_clk, 19200000); - clk_prepare_enable(phy_ref_clk); - - /* disable the power to the usb hub prior to init and reset phy+hub */ - ret = gpio_request_array(panda_ehci_gpios, - ARRAY_SIZE(panda_ehci_gpios)); - if (ret) { - pr_err("Unable to initialize EHCI power/reset\n"); - return; - } - - gpio_export(GPIO_HUB_POWER, 0); - gpio_export(GPIO_HUB_NRESET, 0); - gpio_set_value(GPIO_HUB_NRESET, 1); + ret = clk_add_alias("main_clk", "nop_usb_xceiv.1", "auxclk3_ck", NULL); + if (ret) + pr_err("Failed to add main_clk alias to auxclk3_ck\n"); + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&usbhs_bdata); - - /* enable power to hub */ - gpio_set_value(GPIO_HUB_POWER, 1); } static struct omap_musb_board_data musb_board_data = { @@ -448,7 +435,7 @@ static void __init omap4_panda_init(void) omap_sdrc_init(NULL, NULL); omap4_twl6030_hsmmc_init(mmc); omap4_ehci_init(); - usb_bind_phy("musb-hdrc.0.auto", 0, "omap-usb2.1.auto"); + usb_bind_phy("musb-hdrc.2.auto", 0, "omap-usb2.3.auto"); usb_musb_init(&musb_board_data); omap4_panda_display_init(); } diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 86bab51154ee..4ca6b680aa72 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -47,8 +47,7 @@ #include <asm/mach/map.h> #include <video/omapdss.h> -#include <video/omap-panel-generic-dpi.h> -#include <video/omap-panel-tfp410.h> +#include <video/omap-panel-data.h> #include "common.h" #include "mux.h" @@ -146,28 +145,9 @@ static inline void __init overo_init_smsc911x(void) { return; } #endif /* DSS */ -static int lcd_enabled; -static int dvi_enabled; - #define OVERO_GPIO_LCD_EN 144 #define OVERO_GPIO_LCD_BL 145 -static struct gpio overo_dss_gpios[] __initdata = { - { OVERO_GPIO_LCD_EN, GPIOF_OUT_INIT_HIGH, "OVERO_GPIO_LCD_EN" }, - { OVERO_GPIO_LCD_BL, GPIOF_OUT_INIT_HIGH, "OVERO_GPIO_LCD_BL" }, -}; - -static void __init overo_display_init(void) -{ - if (gpio_request_array(overo_dss_gpios, ARRAY_SIZE(overo_dss_gpios))) { - printk(KERN_ERR "could not obtain DSS control GPIOs\n"); - return; - } - - gpio_export(OVERO_GPIO_LCD_EN, 0); - gpio_export(OVERO_GPIO_LCD_BL, 0); -} - static struct tfp410_platform_data dvi_panel = { .i2c_bus_num = 3, .power_down_gpio = -1, @@ -188,30 +168,13 @@ static struct omap_dss_device overo_tv_device = { .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, }; -static int overo_panel_enable_lcd(struct omap_dss_device *dssdev) -{ - if (dvi_enabled) { - printk(KERN_ERR "cannot enable LCD, DVI is enabled\n"); - return -EINVAL; - } - - gpio_set_value(OVERO_GPIO_LCD_EN, 1); - gpio_set_value(OVERO_GPIO_LCD_BL, 1); - lcd_enabled = 1; - return 0; -} - -static void overo_panel_disable_lcd(struct omap_dss_device *dssdev) -{ - gpio_set_value(OVERO_GPIO_LCD_EN, 0); - gpio_set_value(OVERO_GPIO_LCD_BL, 0); - lcd_enabled = 0; -} - static struct panel_generic_dpi_data lcd43_panel = { .name = "samsung_lte430wq_f0c", - .platform_enable = overo_panel_enable_lcd, - .platform_disable = overo_panel_disable_lcd, + .num_gpios = 2, + .gpios = { + OVERO_GPIO_LCD_EN, + OVERO_GPIO_LCD_BL + }, }; static struct omap_dss_device overo_lcd43_device = { @@ -224,13 +187,20 @@ static struct omap_dss_device overo_lcd43_device = { #if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \ defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE) +static struct panel_generic_dpi_data lcd35_panel = { + .num_gpios = 2, + .gpios = { + OVERO_GPIO_LCD_EN, + OVERO_GPIO_LCD_BL + }, +}; + static struct omap_dss_device overo_lcd35_device = { .type = OMAP_DISPLAY_TYPE_DPI, .name = "lcd35", .driver_name = "lgphilips_lb035q02_panel", .phy.dpi.data_lines = 24, - .platform_enable = overo_panel_enable_lcd, - .platform_disable = overo_panel_disable_lcd, + .data = &lcd35_panel, }; #endif @@ -458,14 +428,16 @@ static int __init overo_spi_init(void) return 0; } +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 2, + .reset_gpio = OVERO_GPIO_USBH_NRESET, + .vcc_gpio = -EINVAL, + }, +}; + static struct usbhs_omap_platform_data usbhs_bdata __initdata = { - .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - .phy_reset = true, - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = OVERO_GPIO_USBH_NRESET, - .reset_gpio_port[2] = -EINVAL }; #ifdef CONFIG_OMAP_MUX @@ -502,10 +474,11 @@ static void __init overo_init(void) ARRAY_SIZE(overo_nand_partitions), NAND_CS, 0, NULL); usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); usb_musb_init(NULL); + + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&usbhs_bdata); overo_spi_init(); overo_init_smsc911x(); - overo_display_init(); overo_init_led(); overo_init_keys(); omap_twl4030_audio_init("overo", NULL); diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 3a077df6b8df..1a884670a6c4 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -547,12 +547,16 @@ static struct regulator_consumer_supply rx51_vio_supplies[] = { REGULATOR_SUPPLY("DVDD", "2-0019"), /* Si4713 IO supply */ REGULATOR_SUPPLY("vio", "2-0063"), + /* lis3lv02d */ + REGULATOR_SUPPLY("Vdd_IO", "3-001d"), }; static struct regulator_consumer_supply rx51_vaux1_consumers[] = { REGULATOR_SUPPLY("vdds_sdi", "omapdss"), /* Si4713 supply */ REGULATOR_SUPPLY("vdd", "2-0063"), + /* lis3lv02d */ + REGULATOR_SUPPLY("Vdd", "3-001d"), }; static struct regulator_init_data rx51_vaux1 = { diff --git a/arch/arm/mach-omap2/board-rx51-video.c b/arch/arm/mach-omap2/board-rx51-video.c index eb667261df08..bd74f9f6063b 100644 --- a/arch/arm/mach-omap2/board-rx51-video.c +++ b/arch/arm/mach-omap2/board-rx51-video.c @@ -16,6 +16,8 @@ #include <linux/mm.h> #include <asm/mach-types.h> #include <video/omapdss.h> +#include <video/omap-panel-data.h> + #include <linux/platform_data/spi-omap2-mcspi.h> #include "soc.h" @@ -27,25 +29,16 @@ #if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE) -static int rx51_lcd_enable(struct omap_dss_device *dssdev) -{ - gpio_set_value(dssdev->reset_gpio, 1); - return 0; -} - -static void rx51_lcd_disable(struct omap_dss_device *dssdev) -{ - gpio_set_value(dssdev->reset_gpio, 0); -} +static struct panel_acx565akm_data lcd_data = { + .reset_gpio = RX51_LCD_RESET_GPIO, +}; static struct omap_dss_device rx51_lcd_device = { .name = "lcd", .driver_name = "panel-acx565akm", .type = OMAP_DISPLAY_TYPE_SDI, .phy.sdi.datapairs = 2, - .reset_gpio = RX51_LCD_RESET_GPIO, - .platform_enable = rx51_lcd_enable, - .platform_disable = rx51_lcd_disable, + .data = &lcd_data, }; static struct omap_dss_device rx51_tv_device = { @@ -76,13 +69,8 @@ static int __init rx51_video_init(void) return 0; } - if (gpio_request_one(RX51_LCD_RESET_GPIO, GPIOF_OUT_INIT_HIGH, - "LCD ACX565AKM reset")) { - pr_err("%s failed to get LCD Reset GPIO\n", __func__); - return 0; - } - omap_display_init(&rx51_dss_board_info); + return 0; } diff --git a/arch/arm/mach-omap2/board-zoom-display.c b/arch/arm/mach-omap2/board-zoom-display.c index 8cef477d6b00..c2a079cb76fc 100644 --- a/arch/arm/mach-omap2/board-zoom-display.c +++ b/arch/arm/mach-omap2/board-zoom-display.c @@ -12,12 +12,12 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/gpio.h> -#include <linux/i2c/twl.h> #include <linux/spi/spi.h> #include <linux/platform_data/spi-omap2-mcspi.h> #include <video/omapdss.h> -#include "board-zoom.h" +#include <video/omap-panel-data.h> +#include "board-zoom.h" #include "soc.h" #include "common.h" @@ -25,92 +25,17 @@ #define LCD_PANEL_RESET_GPIO_PILOT 55 #define LCD_PANEL_QVGA_GPIO 56 -static struct gpio zoom_lcd_gpios[] __initdata = { - { -EINVAL, GPIOF_OUT_INIT_HIGH, "lcd reset" }, - { LCD_PANEL_QVGA_GPIO, GPIOF_OUT_INIT_HIGH, "lcd qvga" }, +static struct panel_nec_nl8048_data zoom_lcd_data = { + /* res_gpio filled in code */ + .qvga_gpio = LCD_PANEL_QVGA_GPIO, }; -static void __init zoom_lcd_panel_init(void) -{ - zoom_lcd_gpios[0].gpio = (omap_rev() > OMAP3430_REV_ES3_0) ? - LCD_PANEL_RESET_GPIO_PROD : - LCD_PANEL_RESET_GPIO_PILOT; - - if (gpio_request_array(zoom_lcd_gpios, ARRAY_SIZE(zoom_lcd_gpios))) - pr_err("%s: Failed to get LCD GPIOs.\n", __func__); -} - -static int zoom_panel_enable_lcd(struct omap_dss_device *dssdev) -{ - return 0; -} - -static void zoom_panel_disable_lcd(struct omap_dss_device *dssdev) -{ -} - -/* Register offsets in TWL4030_MODULE_INTBR */ -#define TWL_INTBR_PMBR1 0xD -#define TWL_INTBR_GPBR1 0xC - -/* Register offsets in TWL_MODULE_PWM */ -#define TWL_LED_PWMON 0x3 -#define TWL_LED_PWMOFF 0x4 - -static int zoom_set_bl_intensity(struct omap_dss_device *dssdev, int level) -{ -#ifdef CONFIG_TWL4030_CORE - unsigned char c; - u8 mux_pwm, enb_pwm; - - if (level > 100) - return -1; - - twl_i2c_read_u8(TWL4030_MODULE_INTBR, &mux_pwm, TWL_INTBR_PMBR1); - twl_i2c_read_u8(TWL4030_MODULE_INTBR, &enb_pwm, TWL_INTBR_GPBR1); - - if (level == 0) { - /* disable pwm1 output and clock */ - enb_pwm = enb_pwm & 0xF5; - /* change pwm1 pin to gpio pin */ - mux_pwm = mux_pwm & 0xCF; - twl_i2c_write_u8(TWL4030_MODULE_INTBR, - enb_pwm, TWL_INTBR_GPBR1); - twl_i2c_write_u8(TWL4030_MODULE_INTBR, - mux_pwm, TWL_INTBR_PMBR1); - return 0; - } - - if (!((enb_pwm & 0xA) && (mux_pwm & 0x30))) { - /* change gpio pin to pwm1 pin */ - mux_pwm = mux_pwm | 0x30; - /* enable pwm1 output and clock*/ - enb_pwm = enb_pwm | 0x0A; - twl_i2c_write_u8(TWL4030_MODULE_INTBR, - mux_pwm, TWL_INTBR_PMBR1); - twl_i2c_write_u8(TWL4030_MODULE_INTBR, - enb_pwm, TWL_INTBR_GPBR1); - } - - c = ((50 * (100 - level)) / 100) + 1; - twl_i2c_write_u8(TWL_MODULE_PWM, 0x7F, TWL_LED_PWMOFF); - twl_i2c_write_u8(TWL_MODULE_PWM, c, TWL_LED_PWMON); -#else - pr_warn("Backlight not enabled\n"); -#endif - - return 0; -} - static struct omap_dss_device zoom_lcd_device = { .name = "lcd", .driver_name = "NEC_8048_panel", .type = OMAP_DISPLAY_TYPE_DPI, .phy.dpi.data_lines = 24, - .platform_enable = zoom_panel_enable_lcd, - .platform_disable = zoom_panel_disable_lcd, - .max_backlight_level = 100, - .set_backlight = zoom_set_bl_intensity, + .data = &zoom_lcd_data, }; static struct omap_dss_device *zoom_dss_devices[] = { @@ -123,6 +48,13 @@ static struct omap_dss_board_info zoom_dss_data = { .default_device = &zoom_lcd_device, }; +static void __init zoom_lcd_panel_init(void) +{ + zoom_lcd_data.res_gpio = (omap_rev() > OMAP3430_REV_ES3_0) ? + LCD_PANEL_RESET_GPIO_PROD : + LCD_PANEL_RESET_GPIO_PILOT; +} + static struct omap2_mcspi_device_config dss_lcd_mcspi_config = { .turbo_mode = 1, }; diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index cdc0c1021863..a90375d5b2b6 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -22,6 +22,9 @@ #include <linux/platform_data/gpio-omap.h> #include <linux/platform_data/omap-twl4030.h> #include <linux/usb/phy.h> +#include <linux/pwm.h> +#include <linux/leds_pwm.h> +#include <linux/pwm_backlight.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -193,6 +196,53 @@ static struct platform_device omap_vwlan_device = { }, }; +static struct pwm_lookup zoom_pwm_lookup[] = { + PWM_LOOKUP("twl-pwm", 0, "leds_pwm", "zoom::keypad"), + PWM_LOOKUP("twl-pwm", 1, "pwm-backlight", "backlight"), +}; + +static struct led_pwm zoom_pwm_leds[] = { + { + .name = "zoom::keypad", + .max_brightness = 127, + .pwm_period_ns = 7812500, + }, +}; + +static struct led_pwm_platform_data zoom_pwm_data = { + .num_leds = ARRAY_SIZE(zoom_pwm_leds), + .leds = zoom_pwm_leds, +}; + +static struct platform_device zoom_leds_pwm = { + .name = "leds_pwm", + .id = -1, + .dev = { + .platform_data = &zoom_pwm_data, + }, +}; + +static struct platform_pwm_backlight_data zoom_backlight_data = { + .pwm_id = 1, + .max_brightness = 127, + .dft_brightness = 127, + .pwm_period_ns = 7812500, +}; + +static struct platform_device zoom_backlight_pwm = { + .name = "pwm-backlight", + .id = -1, + .dev = { + .platform_data = &zoom_backlight_data, + }, +}; + +static struct platform_device *zoom_devices[] __initdata = { + &omap_vwlan_device, + &zoom_leds_pwm, + &zoom_backlight_pwm, +}; + static struct wl12xx_platform_data omap_zoom_wlan_data __initdata = { .board_ref_clock = WL12XX_REFCLOCK_26, /* 26 MHz */ }; @@ -301,7 +351,8 @@ void __init zoom_peripherals_init(void) omap_hsmmc_init(mmc); omap_i2c_init(); - platform_device_register(&omap_vwlan_device); + pwm_add_table(zoom_pwm_lookup, ARRAY_SIZE(zoom_pwm_lookup)); + platform_add_devices(zoom_devices, ARRAY_SIZE(zoom_devices)); usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); usb_musb_init(NULL); enable_board_wakeup_source(); diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c index 5e4d4c9fe61a..1a3dd865d8eb 100644 --- a/arch/arm/mach-omap2/board-zoom.c +++ b/arch/arm/mach-omap2/board-zoom.c @@ -92,14 +92,16 @@ static struct mtd_partition zoom_nand_partitions[] = { }, }; +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 2, + .reset_gpio = ZOOM3_EHCI_RESET_GPIO, + .vcc_gpio = -EINVAL, + }, +}; + static struct usbhs_omap_platform_data usbhs_bdata __initdata = { - .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - .phy_reset = true, - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = ZOOM3_EHCI_RESET_GPIO, - .reset_gpio_port[2] = -EINVAL, }; static void __init omap_zoom_init(void) @@ -109,6 +111,8 @@ static void __init omap_zoom_init(void) } else if (machine_is_omap_zoom3()) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBP); omap_mux_init_gpio(ZOOM3_EHCI_RESET_GPIO, OMAP_PIN_OUTPUT); + + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&usbhs_bdata); } diff --git a/arch/arm/mach-omap2/cclock2420_data.c b/arch/arm/mach-omap2/cclock2420_data.c index 0f0a97c1fcc0..3662f4d4c8ea 100644 --- a/arch/arm/mach-omap2/cclock2420_data.c +++ b/arch/arm/mach-omap2/cclock2420_data.c @@ -1739,153 +1739,153 @@ DEFINE_STRUCT_CLK(wdt4_ick, aes_ick_parent_names, aes_ick_ops); static struct omap_clk omap2420_clks[] = { /* external root sources */ - CLK(NULL, "func_32k_ck", &func_32k_ck, CK_242X), - CLK(NULL, "secure_32k_ck", &secure_32k_ck, CK_242X), - CLK(NULL, "osc_ck", &osc_ck, CK_242X), - CLK(NULL, "sys_ck", &sys_ck, CK_242X), - CLK(NULL, "alt_ck", &alt_ck, CK_242X), - CLK(NULL, "mcbsp_clks", &mcbsp_clks, CK_242X), + CLK(NULL, "func_32k_ck", &func_32k_ck), + CLK(NULL, "secure_32k_ck", &secure_32k_ck), + CLK(NULL, "osc_ck", &osc_ck), + CLK(NULL, "sys_ck", &sys_ck), + CLK(NULL, "alt_ck", &alt_ck), + CLK(NULL, "mcbsp_clks", &mcbsp_clks), /* internal analog sources */ - CLK(NULL, "dpll_ck", &dpll_ck, CK_242X), - CLK(NULL, "apll96_ck", &apll96_ck, CK_242X), - CLK(NULL, "apll54_ck", &apll54_ck, CK_242X), + CLK(NULL, "dpll_ck", &dpll_ck), + CLK(NULL, "apll96_ck", &apll96_ck), + CLK(NULL, "apll54_ck", &apll54_ck), /* internal prcm root sources */ - CLK(NULL, "func_54m_ck", &func_54m_ck, CK_242X), - CLK(NULL, "core_ck", &core_ck, CK_242X), - CLK(NULL, "func_96m_ck", &func_96m_ck, CK_242X), - CLK(NULL, "func_48m_ck", &func_48m_ck, CK_242X), - CLK(NULL, "func_12m_ck", &func_12m_ck, CK_242X), - CLK(NULL, "sys_clkout_src", &sys_clkout_src, CK_242X), - CLK(NULL, "sys_clkout", &sys_clkout, CK_242X), - CLK(NULL, "sys_clkout2_src", &sys_clkout2_src, CK_242X), - CLK(NULL, "sys_clkout2", &sys_clkout2, CK_242X), - CLK(NULL, "emul_ck", &emul_ck, CK_242X), + CLK(NULL, "func_54m_ck", &func_54m_ck), + CLK(NULL, "core_ck", &core_ck), + CLK(NULL, "func_96m_ck", &func_96m_ck), + CLK(NULL, "func_48m_ck", &func_48m_ck), + CLK(NULL, "func_12m_ck", &func_12m_ck), + CLK(NULL, "sys_clkout_src", &sys_clkout_src), + CLK(NULL, "sys_clkout", &sys_clkout), + CLK(NULL, "sys_clkout2_src", &sys_clkout2_src), + CLK(NULL, "sys_clkout2", &sys_clkout2), + CLK(NULL, "emul_ck", &emul_ck), /* mpu domain clocks */ - CLK(NULL, "mpu_ck", &mpu_ck, CK_242X), + CLK(NULL, "mpu_ck", &mpu_ck), /* dsp domain clocks */ - CLK(NULL, "dsp_fck", &dsp_fck, CK_242X), - CLK(NULL, "dsp_ick", &dsp_ick, CK_242X), - CLK(NULL, "iva1_ifck", &iva1_ifck, CK_242X), - CLK(NULL, "iva1_mpu_int_ifck", &iva1_mpu_int_ifck, CK_242X), + CLK(NULL, "dsp_fck", &dsp_fck), + CLK(NULL, "dsp_ick", &dsp_ick), + CLK(NULL, "iva1_ifck", &iva1_ifck), + CLK(NULL, "iva1_mpu_int_ifck", &iva1_mpu_int_ifck), /* GFX domain clocks */ - CLK(NULL, "gfx_3d_fck", &gfx_3d_fck, CK_242X), - CLK(NULL, "gfx_2d_fck", &gfx_2d_fck, CK_242X), - CLK(NULL, "gfx_ick", &gfx_ick, CK_242X), + CLK(NULL, "gfx_3d_fck", &gfx_3d_fck), + CLK(NULL, "gfx_2d_fck", &gfx_2d_fck), + CLK(NULL, "gfx_ick", &gfx_ick), /* DSS domain clocks */ - CLK("omapdss_dss", "ick", &dss_ick, CK_242X), - CLK(NULL, "dss_ick", &dss_ick, CK_242X), - CLK(NULL, "dss1_fck", &dss1_fck, CK_242X), - CLK(NULL, "dss2_fck", &dss2_fck, CK_242X), - CLK(NULL, "dss_54m_fck", &dss_54m_fck, CK_242X), + CLK("omapdss_dss", "ick", &dss_ick), + CLK(NULL, "dss_ick", &dss_ick), + CLK(NULL, "dss1_fck", &dss1_fck), + CLK(NULL, "dss2_fck", &dss2_fck), + CLK(NULL, "dss_54m_fck", &dss_54m_fck), /* L3 domain clocks */ - CLK(NULL, "core_l3_ck", &core_l3_ck, CK_242X), - CLK(NULL, "ssi_fck", &ssi_ssr_sst_fck, CK_242X), - CLK(NULL, "usb_l4_ick", &usb_l4_ick, CK_242X), + CLK(NULL, "core_l3_ck", &core_l3_ck), + CLK(NULL, "ssi_fck", &ssi_ssr_sst_fck), + CLK(NULL, "usb_l4_ick", &usb_l4_ick), /* L4 domain clocks */ - CLK(NULL, "l4_ck", &l4_ck, CK_242X), - CLK(NULL, "ssi_l4_ick", &ssi_l4_ick, CK_242X), + CLK(NULL, "l4_ck", &l4_ck), + CLK(NULL, "ssi_l4_ick", &ssi_l4_ick), /* virtual meta-group clock */ - CLK(NULL, "virt_prcm_set", &virt_prcm_set, CK_242X), + CLK(NULL, "virt_prcm_set", &virt_prcm_set), /* general l4 interface ck, multi-parent functional clk */ - CLK(NULL, "gpt1_ick", &gpt1_ick, CK_242X), - CLK(NULL, "gpt1_fck", &gpt1_fck, CK_242X), - CLK(NULL, "gpt2_ick", &gpt2_ick, CK_242X), - CLK(NULL, "gpt2_fck", &gpt2_fck, CK_242X), - CLK(NULL, "gpt3_ick", &gpt3_ick, CK_242X), - CLK(NULL, "gpt3_fck", &gpt3_fck, CK_242X), - CLK(NULL, "gpt4_ick", &gpt4_ick, CK_242X), - CLK(NULL, "gpt4_fck", &gpt4_fck, CK_242X), - CLK(NULL, "gpt5_ick", &gpt5_ick, CK_242X), - CLK(NULL, "gpt5_fck", &gpt5_fck, CK_242X), - CLK(NULL, "gpt6_ick", &gpt6_ick, CK_242X), - CLK(NULL, "gpt6_fck", &gpt6_fck, CK_242X), - CLK(NULL, "gpt7_ick", &gpt7_ick, CK_242X), - CLK(NULL, "gpt7_fck", &gpt7_fck, CK_242X), - CLK(NULL, "gpt8_ick", &gpt8_ick, CK_242X), - CLK(NULL, "gpt8_fck", &gpt8_fck, CK_242X), - CLK(NULL, "gpt9_ick", &gpt9_ick, CK_242X), - CLK(NULL, "gpt9_fck", &gpt9_fck, CK_242X), - CLK(NULL, "gpt10_ick", &gpt10_ick, CK_242X), - CLK(NULL, "gpt10_fck", &gpt10_fck, CK_242X), - CLK(NULL, "gpt11_ick", &gpt11_ick, CK_242X), - CLK(NULL, "gpt11_fck", &gpt11_fck, CK_242X), - CLK(NULL, "gpt12_ick", &gpt12_ick, CK_242X), - CLK(NULL, "gpt12_fck", &gpt12_fck, CK_242X), - CLK("omap-mcbsp.1", "ick", &mcbsp1_ick, CK_242X), - CLK(NULL, "mcbsp1_ick", &mcbsp1_ick, CK_242X), - CLK(NULL, "mcbsp1_fck", &mcbsp1_fck, CK_242X), - CLK("omap-mcbsp.2", "ick", &mcbsp2_ick, CK_242X), - CLK(NULL, "mcbsp2_ick", &mcbsp2_ick, CK_242X), - CLK(NULL, "mcbsp2_fck", &mcbsp2_fck, CK_242X), - CLK("omap2_mcspi.1", "ick", &mcspi1_ick, CK_242X), - CLK(NULL, "mcspi1_ick", &mcspi1_ick, CK_242X), - CLK(NULL, "mcspi1_fck", &mcspi1_fck, CK_242X), - CLK("omap2_mcspi.2", "ick", &mcspi2_ick, CK_242X), - CLK(NULL, "mcspi2_ick", &mcspi2_ick, CK_242X), - CLK(NULL, "mcspi2_fck", &mcspi2_fck, CK_242X), - CLK(NULL, "uart1_ick", &uart1_ick, CK_242X), - CLK(NULL, "uart1_fck", &uart1_fck, CK_242X), - CLK(NULL, "uart2_ick", &uart2_ick, CK_242X), - CLK(NULL, "uart2_fck", &uart2_fck, CK_242X), - CLK(NULL, "uart3_ick", &uart3_ick, CK_242X), - CLK(NULL, "uart3_fck", &uart3_fck, CK_242X), - CLK(NULL, "gpios_ick", &gpios_ick, CK_242X), - CLK(NULL, "gpios_fck", &gpios_fck, CK_242X), - CLK("omap_wdt", "ick", &mpu_wdt_ick, CK_242X), - CLK(NULL, "mpu_wdt_ick", &mpu_wdt_ick, CK_242X), - CLK(NULL, "mpu_wdt_fck", &mpu_wdt_fck, CK_242X), - CLK(NULL, "sync_32k_ick", &sync_32k_ick, CK_242X), - CLK(NULL, "wdt1_ick", &wdt1_ick, CK_242X), - CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_242X), - CLK("omap24xxcam", "fck", &cam_fck, CK_242X), - CLK(NULL, "cam_fck", &cam_fck, CK_242X), - CLK("omap24xxcam", "ick", &cam_ick, CK_242X), - CLK(NULL, "cam_ick", &cam_ick, CK_242X), - CLK(NULL, "mailboxes_ick", &mailboxes_ick, CK_242X), - CLK(NULL, "wdt4_ick", &wdt4_ick, CK_242X), - CLK(NULL, "wdt4_fck", &wdt4_fck, CK_242X), - CLK(NULL, "wdt3_ick", &wdt3_ick, CK_242X), - CLK(NULL, "wdt3_fck", &wdt3_fck, CK_242X), - CLK(NULL, "mspro_ick", &mspro_ick, CK_242X), - CLK(NULL, "mspro_fck", &mspro_fck, CK_242X), - CLK("mmci-omap.0", "ick", &mmc_ick, CK_242X), - CLK(NULL, "mmc_ick", &mmc_ick, CK_242X), - CLK("mmci-omap.0", "fck", &mmc_fck, CK_242X), - CLK(NULL, "mmc_fck", &mmc_fck, CK_242X), - CLK(NULL, "fac_ick", &fac_ick, CK_242X), - CLK(NULL, "fac_fck", &fac_fck, CK_242X), - CLK(NULL, "eac_ick", &eac_ick, CK_242X), - CLK(NULL, "eac_fck", &eac_fck, CK_242X), - CLK("omap_hdq.0", "ick", &hdq_ick, CK_242X), - CLK(NULL, "hdq_ick", &hdq_ick, CK_242X), - CLK("omap_hdq.0", "fck", &hdq_fck, CK_242X), - CLK(NULL, "hdq_fck", &hdq_fck, CK_242X), - CLK("omap_i2c.1", "ick", &i2c1_ick, CK_242X), - CLK(NULL, "i2c1_ick", &i2c1_ick, CK_242X), - CLK(NULL, "i2c1_fck", &i2c1_fck, CK_242X), - CLK("omap_i2c.2", "ick", &i2c2_ick, CK_242X), - CLK(NULL, "i2c2_ick", &i2c2_ick, CK_242X), - CLK(NULL, "i2c2_fck", &i2c2_fck, CK_242X), - CLK(NULL, "gpmc_fck", &gpmc_fck, CK_242X), - CLK(NULL, "sdma_fck", &sdma_fck, CK_242X), - CLK(NULL, "sdma_ick", &sdma_ick, CK_242X), - CLK(NULL, "sdrc_ick", &sdrc_ick, CK_242X), - CLK(NULL, "vlynq_ick", &vlynq_ick, CK_242X), - CLK(NULL, "vlynq_fck", &vlynq_fck, CK_242X), - CLK(NULL, "des_ick", &des_ick, CK_242X), - CLK("omap-sham", "ick", &sha_ick, CK_242X), - CLK(NULL, "sha_ick", &sha_ick, CK_242X), - CLK("omap_rng", "ick", &rng_ick, CK_242X), - CLK(NULL, "rng_ick", &rng_ick, CK_242X), - CLK("omap-aes", "ick", &aes_ick, CK_242X), - CLK(NULL, "aes_ick", &aes_ick, CK_242X), - CLK(NULL, "pka_ick", &pka_ick, CK_242X), - CLK(NULL, "usb_fck", &usb_fck, CK_242X), - CLK("musb-hdrc", "fck", &osc_ck, CK_242X), - CLK(NULL, "timer_32k_ck", &func_32k_ck, CK_242X), - CLK(NULL, "timer_sys_ck", &sys_ck, CK_242X), - CLK(NULL, "timer_ext_ck", &alt_ck, CK_242X), - CLK(NULL, "cpufreq_ck", &virt_prcm_set, CK_242X), + CLK(NULL, "gpt1_ick", &gpt1_ick), + CLK(NULL, "gpt1_fck", &gpt1_fck), + CLK(NULL, "gpt2_ick", &gpt2_ick), + CLK(NULL, "gpt2_fck", &gpt2_fck), + CLK(NULL, "gpt3_ick", &gpt3_ick), + CLK(NULL, "gpt3_fck", &gpt3_fck), + CLK(NULL, "gpt4_ick", &gpt4_ick), + CLK(NULL, "gpt4_fck", &gpt4_fck), + CLK(NULL, "gpt5_ick", &gpt5_ick), + CLK(NULL, "gpt5_fck", &gpt5_fck), + CLK(NULL, "gpt6_ick", &gpt6_ick), + CLK(NULL, "gpt6_fck", &gpt6_fck), + CLK(NULL, "gpt7_ick", &gpt7_ick), + CLK(NULL, "gpt7_fck", &gpt7_fck), + CLK(NULL, "gpt8_ick", &gpt8_ick), + CLK(NULL, "gpt8_fck", &gpt8_fck), + CLK(NULL, "gpt9_ick", &gpt9_ick), + CLK(NULL, "gpt9_fck", &gpt9_fck), + CLK(NULL, "gpt10_ick", &gpt10_ick), + CLK(NULL, "gpt10_fck", &gpt10_fck), + CLK(NULL, "gpt11_ick", &gpt11_ick), + CLK(NULL, "gpt11_fck", &gpt11_fck), + CLK(NULL, "gpt12_ick", &gpt12_ick), + CLK(NULL, "gpt12_fck", &gpt12_fck), + CLK("omap-mcbsp.1", "ick", &mcbsp1_ick), + CLK(NULL, "mcbsp1_ick", &mcbsp1_ick), + CLK(NULL, "mcbsp1_fck", &mcbsp1_fck), + CLK("omap-mcbsp.2", "ick", &mcbsp2_ick), + CLK(NULL, "mcbsp2_ick", &mcbsp2_ick), + CLK(NULL, "mcbsp2_fck", &mcbsp2_fck), + CLK("omap2_mcspi.1", "ick", &mcspi1_ick), + CLK(NULL, "mcspi1_ick", &mcspi1_ick), + CLK(NULL, "mcspi1_fck", &mcspi1_fck), + CLK("omap2_mcspi.2", "ick", &mcspi2_ick), + CLK(NULL, "mcspi2_ick", &mcspi2_ick), + CLK(NULL, "mcspi2_fck", &mcspi2_fck), + CLK(NULL, "uart1_ick", &uart1_ick), + CLK(NULL, "uart1_fck", &uart1_fck), + CLK(NULL, "uart2_ick", &uart2_ick), + CLK(NULL, "uart2_fck", &uart2_fck), + CLK(NULL, "uart3_ick", &uart3_ick), + CLK(NULL, "uart3_fck", &uart3_fck), + CLK(NULL, "gpios_ick", &gpios_ick), + CLK(NULL, "gpios_fck", &gpios_fck), + CLK("omap_wdt", "ick", &mpu_wdt_ick), + CLK(NULL, "mpu_wdt_ick", &mpu_wdt_ick), + CLK(NULL, "mpu_wdt_fck", &mpu_wdt_fck), + CLK(NULL, "sync_32k_ick", &sync_32k_ick), + CLK(NULL, "wdt1_ick", &wdt1_ick), + CLK(NULL, "omapctrl_ick", &omapctrl_ick), + CLK("omap24xxcam", "fck", &cam_fck), + CLK(NULL, "cam_fck", &cam_fck), + CLK("omap24xxcam", "ick", &cam_ick), + CLK(NULL, "cam_ick", &cam_ick), + CLK(NULL, "mailboxes_ick", &mailboxes_ick), + CLK(NULL, "wdt4_ick", &wdt4_ick), + CLK(NULL, "wdt4_fck", &wdt4_fck), + CLK(NULL, "wdt3_ick", &wdt3_ick), + CLK(NULL, "wdt3_fck", &wdt3_fck), + CLK(NULL, "mspro_ick", &mspro_ick), + CLK(NULL, "mspro_fck", &mspro_fck), + CLK("mmci-omap.0", "ick", &mmc_ick), + CLK(NULL, "mmc_ick", &mmc_ick), + CLK("mmci-omap.0", "fck", &mmc_fck), + CLK(NULL, "mmc_fck", &mmc_fck), + CLK(NULL, "fac_ick", &fac_ick), + CLK(NULL, "fac_fck", &fac_fck), + CLK(NULL, "eac_ick", &eac_ick), + CLK(NULL, "eac_fck", &eac_fck), + CLK("omap_hdq.0", "ick", &hdq_ick), + CLK(NULL, "hdq_ick", &hdq_ick), + CLK("omap_hdq.0", "fck", &hdq_fck), + CLK(NULL, "hdq_fck", &hdq_fck), + CLK("omap_i2c.1", "ick", &i2c1_ick), + CLK(NULL, "i2c1_ick", &i2c1_ick), + CLK(NULL, "i2c1_fck", &i2c1_fck), + CLK("omap_i2c.2", "ick", &i2c2_ick), + CLK(NULL, "i2c2_ick", &i2c2_ick), + CLK(NULL, "i2c2_fck", &i2c2_fck), + CLK(NULL, "gpmc_fck", &gpmc_fck), + CLK(NULL, "sdma_fck", &sdma_fck), + CLK(NULL, "sdma_ick", &sdma_ick), + CLK(NULL, "sdrc_ick", &sdrc_ick), + CLK(NULL, "vlynq_ick", &vlynq_ick), + CLK(NULL, "vlynq_fck", &vlynq_fck), + CLK(NULL, "des_ick", &des_ick), + CLK("omap-sham", "ick", &sha_ick), + CLK(NULL, "sha_ick", &sha_ick), + CLK("omap_rng", "ick", &rng_ick), + CLK(NULL, "rng_ick", &rng_ick), + CLK("omap-aes", "ick", &aes_ick), + CLK(NULL, "aes_ick", &aes_ick), + CLK(NULL, "pka_ick", &pka_ick), + CLK(NULL, "usb_fck", &usb_fck), + CLK("musb-hdrc", "fck", &osc_ck), + CLK(NULL, "timer_32k_ck", &func_32k_ck), + CLK(NULL, "timer_sys_ck", &sys_ck), + CLK(NULL, "timer_ext_ck", &alt_ck), + CLK(NULL, "cpufreq_ck", &virt_prcm_set), }; @@ -1904,8 +1904,6 @@ static const char *enable_init_clks[] = { int __init omap2420_clk_init(void) { - struct omap_clk *c; - prcm_clksrc_ctrl = OMAP2420_PRCM_CLKSRC_CTRL; cpu_mask = RATE_IN_242X; rate_table = omap2420_rate_table; @@ -1914,12 +1912,7 @@ int __init omap2420_clk_init(void) omap2xxx_clkt_vps_check_bootloader_rates(); - for (c = omap2420_clks; c < omap2420_clks + ARRAY_SIZE(omap2420_clks); - c++) { - clkdev_add(&c->lk); - if (!__clk_init(NULL, c->lk.clk)) - omap2_init_clk_hw_omap_clocks(c->lk.clk); - } + omap_clocks_register(omap2420_clks, ARRAY_SIZE(omap2420_clks)); omap2xxx_clkt_vps_late_init(); diff --git a/arch/arm/mach-omap2/cclock2430_data.c b/arch/arm/mach-omap2/cclock2430_data.c index aed8f74ca076..5e4b037bb24c 100644 --- a/arch/arm/mach-omap2/cclock2430_data.c +++ b/arch/arm/mach-omap2/cclock2430_data.c @@ -1840,168 +1840,170 @@ DEFINE_STRUCT_CLK(wdt4_ick, aes_ick_parent_names, aes_ick_ops); static struct omap_clk omap2430_clks[] = { /* external root sources */ - CLK(NULL, "func_32k_ck", &func_32k_ck, CK_243X), - CLK(NULL, "secure_32k_ck", &secure_32k_ck, CK_243X), - CLK(NULL, "osc_ck", &osc_ck, CK_243X), - CLK("twl", "fck", &osc_ck, CK_243X), - CLK(NULL, "sys_ck", &sys_ck, CK_243X), - CLK(NULL, "alt_ck", &alt_ck, CK_243X), - CLK(NULL, "mcbsp_clks", &mcbsp_clks, CK_243X), + CLK(NULL, "func_32k_ck", &func_32k_ck), + CLK(NULL, "secure_32k_ck", &secure_32k_ck), + CLK(NULL, "osc_ck", &osc_ck), + CLK("twl", "fck", &osc_ck), + CLK(NULL, "sys_ck", &sys_ck), + CLK(NULL, "alt_ck", &alt_ck), + CLK(NULL, "mcbsp_clks", &mcbsp_clks), /* internal analog sources */ - CLK(NULL, "dpll_ck", &dpll_ck, CK_243X), - CLK(NULL, "apll96_ck", &apll96_ck, CK_243X), - CLK(NULL, "apll54_ck", &apll54_ck, CK_243X), + CLK(NULL, "dpll_ck", &dpll_ck), + CLK(NULL, "apll96_ck", &apll96_ck), + CLK(NULL, "apll54_ck", &apll54_ck), /* internal prcm root sources */ - CLK(NULL, "func_54m_ck", &func_54m_ck, CK_243X), - CLK(NULL, "core_ck", &core_ck, CK_243X), - CLK(NULL, "func_96m_ck", &func_96m_ck, CK_243X), - CLK(NULL, "func_48m_ck", &func_48m_ck, CK_243X), - CLK(NULL, "func_12m_ck", &func_12m_ck, CK_243X), - CLK(NULL, "sys_clkout_src", &sys_clkout_src, CK_243X), - CLK(NULL, "sys_clkout", &sys_clkout, CK_243X), - CLK(NULL, "emul_ck", &emul_ck, CK_243X), + CLK(NULL, "func_54m_ck", &func_54m_ck), + CLK(NULL, "core_ck", &core_ck), + CLK(NULL, "func_96m_ck", &func_96m_ck), + CLK(NULL, "func_48m_ck", &func_48m_ck), + CLK(NULL, "func_12m_ck", &func_12m_ck), + CLK(NULL, "sys_clkout_src", &sys_clkout_src), + CLK(NULL, "sys_clkout", &sys_clkout), + CLK(NULL, "emul_ck", &emul_ck), /* mpu domain clocks */ - CLK(NULL, "mpu_ck", &mpu_ck, CK_243X), + CLK(NULL, "mpu_ck", &mpu_ck), /* dsp domain clocks */ - CLK(NULL, "dsp_fck", &dsp_fck, CK_243X), - CLK(NULL, "iva2_1_ick", &iva2_1_ick, CK_243X), + CLK(NULL, "dsp_fck", &dsp_fck), + CLK(NULL, "iva2_1_ick", &iva2_1_ick), /* GFX domain clocks */ - CLK(NULL, "gfx_3d_fck", &gfx_3d_fck, CK_243X), - CLK(NULL, "gfx_2d_fck", &gfx_2d_fck, CK_243X), - CLK(NULL, "gfx_ick", &gfx_ick, CK_243X), + CLK(NULL, "gfx_3d_fck", &gfx_3d_fck), + CLK(NULL, "gfx_2d_fck", &gfx_2d_fck), + CLK(NULL, "gfx_ick", &gfx_ick), /* Modem domain clocks */ - CLK(NULL, "mdm_ick", &mdm_ick, CK_243X), - CLK(NULL, "mdm_osc_ck", &mdm_osc_ck, CK_243X), + CLK(NULL, "mdm_ick", &mdm_ick), + CLK(NULL, "mdm_osc_ck", &mdm_osc_ck), /* DSS domain clocks */ - CLK("omapdss_dss", "ick", &dss_ick, CK_243X), - CLK(NULL, "dss_ick", &dss_ick, CK_243X), - CLK(NULL, "dss1_fck", &dss1_fck, CK_243X), - CLK(NULL, "dss2_fck", &dss2_fck, CK_243X), - CLK(NULL, "dss_54m_fck", &dss_54m_fck, CK_243X), + CLK("omapdss_dss", "ick", &dss_ick), + CLK(NULL, "dss_ick", &dss_ick), + CLK(NULL, "dss1_fck", &dss1_fck), + CLK(NULL, "dss2_fck", &dss2_fck), + CLK(NULL, "dss_54m_fck", &dss_54m_fck), /* L3 domain clocks */ - CLK(NULL, "core_l3_ck", &core_l3_ck, CK_243X), - CLK(NULL, "ssi_fck", &ssi_ssr_sst_fck, CK_243X), - CLK(NULL, "usb_l4_ick", &usb_l4_ick, CK_243X), + CLK(NULL, "core_l3_ck", &core_l3_ck), + CLK(NULL, "ssi_fck", &ssi_ssr_sst_fck), + CLK(NULL, "usb_l4_ick", &usb_l4_ick), /* L4 domain clocks */ - CLK(NULL, "l4_ck", &l4_ck, CK_243X), - CLK(NULL, "ssi_l4_ick", &ssi_l4_ick, CK_243X), + CLK(NULL, "l4_ck", &l4_ck), + CLK(NULL, "ssi_l4_ick", &ssi_l4_ick), /* virtual meta-group clock */ - CLK(NULL, "virt_prcm_set", &virt_prcm_set, CK_243X), + CLK(NULL, "virt_prcm_set", &virt_prcm_set), /* general l4 interface ck, multi-parent functional clk */ - CLK(NULL, "gpt1_ick", &gpt1_ick, CK_243X), - CLK(NULL, "gpt1_fck", &gpt1_fck, CK_243X), - CLK(NULL, "gpt2_ick", &gpt2_ick, CK_243X), - CLK(NULL, "gpt2_fck", &gpt2_fck, CK_243X), - CLK(NULL, "gpt3_ick", &gpt3_ick, CK_243X), - CLK(NULL, "gpt3_fck", &gpt3_fck, CK_243X), - CLK(NULL, "gpt4_ick", &gpt4_ick, CK_243X), - CLK(NULL, "gpt4_fck", &gpt4_fck, CK_243X), - CLK(NULL, "gpt5_ick", &gpt5_ick, CK_243X), - CLK(NULL, "gpt5_fck", &gpt5_fck, CK_243X), - CLK(NULL, "gpt6_ick", &gpt6_ick, CK_243X), - CLK(NULL, "gpt6_fck", &gpt6_fck, CK_243X), - CLK(NULL, "gpt7_ick", &gpt7_ick, CK_243X), - CLK(NULL, "gpt7_fck", &gpt7_fck, CK_243X), - CLK(NULL, "gpt8_ick", &gpt8_ick, CK_243X), - CLK(NULL, "gpt8_fck", &gpt8_fck, CK_243X), - CLK(NULL, "gpt9_ick", &gpt9_ick, CK_243X), - CLK(NULL, "gpt9_fck", &gpt9_fck, CK_243X), - CLK(NULL, "gpt10_ick", &gpt10_ick, CK_243X), - CLK(NULL, "gpt10_fck", &gpt10_fck, CK_243X), - CLK(NULL, "gpt11_ick", &gpt11_ick, CK_243X), - CLK(NULL, "gpt11_fck", &gpt11_fck, CK_243X), - CLK(NULL, "gpt12_ick", &gpt12_ick, CK_243X), - CLK(NULL, "gpt12_fck", &gpt12_fck, CK_243X), - CLK("omap-mcbsp.1", "ick", &mcbsp1_ick, CK_243X), - CLK(NULL, "mcbsp1_ick", &mcbsp1_ick, CK_243X), - CLK(NULL, "mcbsp1_fck", &mcbsp1_fck, CK_243X), - CLK("omap-mcbsp.2", "ick", &mcbsp2_ick, CK_243X), - CLK(NULL, "mcbsp2_ick", &mcbsp2_ick, CK_243X), - CLK(NULL, "mcbsp2_fck", &mcbsp2_fck, CK_243X), - CLK("omap-mcbsp.3", "ick", &mcbsp3_ick, CK_243X), - CLK(NULL, "mcbsp3_ick", &mcbsp3_ick, CK_243X), - CLK(NULL, "mcbsp3_fck", &mcbsp3_fck, CK_243X), - CLK("omap-mcbsp.4", "ick", &mcbsp4_ick, CK_243X), - CLK(NULL, "mcbsp4_ick", &mcbsp4_ick, CK_243X), - CLK(NULL, "mcbsp4_fck", &mcbsp4_fck, CK_243X), - CLK("omap-mcbsp.5", "ick", &mcbsp5_ick, CK_243X), - CLK(NULL, "mcbsp5_ick", &mcbsp5_ick, CK_243X), - CLK(NULL, "mcbsp5_fck", &mcbsp5_fck, CK_243X), - CLK("omap2_mcspi.1", "ick", &mcspi1_ick, CK_243X), - CLK(NULL, "mcspi1_ick", &mcspi1_ick, CK_243X), - CLK(NULL, "mcspi1_fck", &mcspi1_fck, CK_243X), - CLK("omap2_mcspi.2", "ick", &mcspi2_ick, CK_243X), - CLK(NULL, "mcspi2_ick", &mcspi2_ick, CK_243X), - CLK(NULL, "mcspi2_fck", &mcspi2_fck, CK_243X), - CLK("omap2_mcspi.3", "ick", &mcspi3_ick, CK_243X), - CLK(NULL, "mcspi3_ick", &mcspi3_ick, CK_243X), - CLK(NULL, "mcspi3_fck", &mcspi3_fck, CK_243X), - CLK(NULL, "uart1_ick", &uart1_ick, CK_243X), - CLK(NULL, "uart1_fck", &uart1_fck, CK_243X), - CLK(NULL, "uart2_ick", &uart2_ick, CK_243X), - CLK(NULL, "uart2_fck", &uart2_fck, CK_243X), - CLK(NULL, "uart3_ick", &uart3_ick, CK_243X), - CLK(NULL, "uart3_fck", &uart3_fck, CK_243X), - CLK(NULL, "gpios_ick", &gpios_ick, CK_243X), - CLK(NULL, "gpios_fck", &gpios_fck, CK_243X), - CLK("omap_wdt", "ick", &mpu_wdt_ick, CK_243X), - CLK(NULL, "mpu_wdt_ick", &mpu_wdt_ick, CK_243X), - CLK(NULL, "mpu_wdt_fck", &mpu_wdt_fck, CK_243X), - CLK(NULL, "sync_32k_ick", &sync_32k_ick, CK_243X), - CLK(NULL, "wdt1_ick", &wdt1_ick, CK_243X), - CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_243X), - CLK(NULL, "icr_ick", &icr_ick, CK_243X), - CLK("omap24xxcam", "fck", &cam_fck, CK_243X), - CLK(NULL, "cam_fck", &cam_fck, CK_243X), - CLK("omap24xxcam", "ick", &cam_ick, CK_243X), - CLK(NULL, "cam_ick", &cam_ick, CK_243X), - CLK(NULL, "mailboxes_ick", &mailboxes_ick, CK_243X), - CLK(NULL, "wdt4_ick", &wdt4_ick, CK_243X), - CLK(NULL, "wdt4_fck", &wdt4_fck, CK_243X), - CLK(NULL, "mspro_ick", &mspro_ick, CK_243X), - CLK(NULL, "mspro_fck", &mspro_fck, CK_243X), - CLK(NULL, "fac_ick", &fac_ick, CK_243X), - CLK(NULL, "fac_fck", &fac_fck, CK_243X), - CLK("omap_hdq.0", "ick", &hdq_ick, CK_243X), - CLK(NULL, "hdq_ick", &hdq_ick, CK_243X), - CLK("omap_hdq.1", "fck", &hdq_fck, CK_243X), - CLK(NULL, "hdq_fck", &hdq_fck, CK_243X), - CLK("omap_i2c.1", "ick", &i2c1_ick, CK_243X), - CLK(NULL, "i2c1_ick", &i2c1_ick, CK_243X), - CLK(NULL, "i2chs1_fck", &i2chs1_fck, CK_243X), - CLK("omap_i2c.2", "ick", &i2c2_ick, CK_243X), - CLK(NULL, "i2c2_ick", &i2c2_ick, CK_243X), - CLK(NULL, "i2chs2_fck", &i2chs2_fck, CK_243X), - CLK(NULL, "gpmc_fck", &gpmc_fck, CK_243X), - CLK(NULL, "sdma_fck", &sdma_fck, CK_243X), - CLK(NULL, "sdma_ick", &sdma_ick, CK_243X), - CLK(NULL, "sdrc_ick", &sdrc_ick, CK_243X), - CLK(NULL, "des_ick", &des_ick, CK_243X), - CLK("omap-sham", "ick", &sha_ick, CK_243X), - CLK("omap_rng", "ick", &rng_ick, CK_243X), - CLK(NULL, "rng_ick", &rng_ick, CK_243X), - CLK("omap-aes", "ick", &aes_ick, CK_243X), - CLK(NULL, "pka_ick", &pka_ick, CK_243X), - CLK(NULL, "usb_fck", &usb_fck, CK_243X), - CLK("musb-omap2430", "ick", &usbhs_ick, CK_243X), - CLK(NULL, "usbhs_ick", &usbhs_ick, CK_243X), - CLK("omap_hsmmc.0", "ick", &mmchs1_ick, CK_243X), - CLK(NULL, "mmchs1_ick", &mmchs1_ick, CK_243X), - CLK(NULL, "mmchs1_fck", &mmchs1_fck, CK_243X), - CLK("omap_hsmmc.1", "ick", &mmchs2_ick, CK_243X), - CLK(NULL, "mmchs2_ick", &mmchs2_ick, CK_243X), - CLK(NULL, "mmchs2_fck", &mmchs2_fck, CK_243X), - CLK(NULL, "gpio5_ick", &gpio5_ick, CK_243X), - CLK(NULL, "gpio5_fck", &gpio5_fck, CK_243X), - CLK(NULL, "mdm_intc_ick", &mdm_intc_ick, CK_243X), - CLK("omap_hsmmc.0", "mmchsdb_fck", &mmchsdb1_fck, CK_243X), - CLK(NULL, "mmchsdb1_fck", &mmchsdb1_fck, CK_243X), - CLK("omap_hsmmc.1", "mmchsdb_fck", &mmchsdb2_fck, CK_243X), - CLK(NULL, "mmchsdb2_fck", &mmchsdb2_fck, CK_243X), - CLK(NULL, "timer_32k_ck", &func_32k_ck, CK_243X), - CLK(NULL, "timer_sys_ck", &sys_ck, CK_243X), - CLK(NULL, "timer_ext_ck", &alt_ck, CK_243X), - CLK(NULL, "cpufreq_ck", &virt_prcm_set, CK_243X), + CLK(NULL, "gpt1_ick", &gpt1_ick), + CLK(NULL, "gpt1_fck", &gpt1_fck), + CLK(NULL, "gpt2_ick", &gpt2_ick), + CLK(NULL, "gpt2_fck", &gpt2_fck), + CLK(NULL, "gpt3_ick", &gpt3_ick), + CLK(NULL, "gpt3_fck", &gpt3_fck), + CLK(NULL, "gpt4_ick", &gpt4_ick), + CLK(NULL, "gpt4_fck", &gpt4_fck), + CLK(NULL, "gpt5_ick", &gpt5_ick), + CLK(NULL, "gpt5_fck", &gpt5_fck), + CLK(NULL, "gpt6_ick", &gpt6_ick), + CLK(NULL, "gpt6_fck", &gpt6_fck), + CLK(NULL, "gpt7_ick", &gpt7_ick), + CLK(NULL, "gpt7_fck", &gpt7_fck), + CLK(NULL, "gpt8_ick", &gpt8_ick), + CLK(NULL, "gpt8_fck", &gpt8_fck), + CLK(NULL, "gpt9_ick", &gpt9_ick), + CLK(NULL, "gpt9_fck", &gpt9_fck), + CLK(NULL, "gpt10_ick", &gpt10_ick), + CLK(NULL, "gpt10_fck", &gpt10_fck), + CLK(NULL, "gpt11_ick", &gpt11_ick), + CLK(NULL, "gpt11_fck", &gpt11_fck), + CLK(NULL, "gpt12_ick", &gpt12_ick), + CLK(NULL, "gpt12_fck", &gpt12_fck), + CLK("omap-mcbsp.1", "ick", &mcbsp1_ick), + CLK(NULL, "mcbsp1_ick", &mcbsp1_ick), + CLK(NULL, "mcbsp1_fck", &mcbsp1_fck), + CLK("omap-mcbsp.2", "ick", &mcbsp2_ick), + CLK(NULL, "mcbsp2_ick", &mcbsp2_ick), + CLK(NULL, "mcbsp2_fck", &mcbsp2_fck), + CLK("omap-mcbsp.3", "ick", &mcbsp3_ick), + CLK(NULL, "mcbsp3_ick", &mcbsp3_ick), + CLK(NULL, "mcbsp3_fck", &mcbsp3_fck), + CLK("omap-mcbsp.4", "ick", &mcbsp4_ick), + CLK(NULL, "mcbsp4_ick", &mcbsp4_ick), + CLK(NULL, "mcbsp4_fck", &mcbsp4_fck), + CLK("omap-mcbsp.5", "ick", &mcbsp5_ick), + CLK(NULL, "mcbsp5_ick", &mcbsp5_ick), + CLK(NULL, "mcbsp5_fck", &mcbsp5_fck), + CLK("omap2_mcspi.1", "ick", &mcspi1_ick), + CLK(NULL, "mcspi1_ick", &mcspi1_ick), + CLK(NULL, "mcspi1_fck", &mcspi1_fck), + CLK("omap2_mcspi.2", "ick", &mcspi2_ick), + CLK(NULL, "mcspi2_ick", &mcspi2_ick), + CLK(NULL, "mcspi2_fck", &mcspi2_fck), + CLK("omap2_mcspi.3", "ick", &mcspi3_ick), + CLK(NULL, "mcspi3_ick", &mcspi3_ick), + CLK(NULL, "mcspi3_fck", &mcspi3_fck), + CLK(NULL, "uart1_ick", &uart1_ick), + CLK(NULL, "uart1_fck", &uart1_fck), + CLK(NULL, "uart2_ick", &uart2_ick), + CLK(NULL, "uart2_fck", &uart2_fck), + CLK(NULL, "uart3_ick", &uart3_ick), + CLK(NULL, "uart3_fck", &uart3_fck), + CLK(NULL, "gpios_ick", &gpios_ick), + CLK(NULL, "gpios_fck", &gpios_fck), + CLK("omap_wdt", "ick", &mpu_wdt_ick), + CLK(NULL, "mpu_wdt_ick", &mpu_wdt_ick), + CLK(NULL, "mpu_wdt_fck", &mpu_wdt_fck), + CLK(NULL, "sync_32k_ick", &sync_32k_ick), + CLK(NULL, "wdt1_ick", &wdt1_ick), + CLK(NULL, "omapctrl_ick", &omapctrl_ick), + CLK(NULL, "icr_ick", &icr_ick), + CLK("omap24xxcam", "fck", &cam_fck), + CLK(NULL, "cam_fck", &cam_fck), + CLK("omap24xxcam", "ick", &cam_ick), + CLK(NULL, "cam_ick", &cam_ick), + CLK(NULL, "mailboxes_ick", &mailboxes_ick), + CLK(NULL, "wdt4_ick", &wdt4_ick), + CLK(NULL, "wdt4_fck", &wdt4_fck), + CLK(NULL, "mspro_ick", &mspro_ick), + CLK(NULL, "mspro_fck", &mspro_fck), + CLK(NULL, "fac_ick", &fac_ick), + CLK(NULL, "fac_fck", &fac_fck), + CLK("omap_hdq.0", "ick", &hdq_ick), + CLK(NULL, "hdq_ick", &hdq_ick), + CLK("omap_hdq.1", "fck", &hdq_fck), + CLK(NULL, "hdq_fck", &hdq_fck), + CLK("omap_i2c.1", "ick", &i2c1_ick), + CLK(NULL, "i2c1_ick", &i2c1_ick), + CLK(NULL, "i2chs1_fck", &i2chs1_fck), + CLK("omap_i2c.2", "ick", &i2c2_ick), + CLK(NULL, "i2c2_ick", &i2c2_ick), + CLK(NULL, "i2chs2_fck", &i2chs2_fck), + CLK(NULL, "gpmc_fck", &gpmc_fck), + CLK(NULL, "sdma_fck", &sdma_fck), + CLK(NULL, "sdma_ick", &sdma_ick), + CLK(NULL, "sdrc_ick", &sdrc_ick), + CLK(NULL, "des_ick", &des_ick), + CLK("omap-sham", "ick", &sha_ick), + CLK(NULL, "sha_ick", &sha_ick), + CLK("omap_rng", "ick", &rng_ick), + CLK(NULL, "rng_ick", &rng_ick), + CLK("omap-aes", "ick", &aes_ick), + CLK(NULL, "aes_ick", &aes_ick), + CLK(NULL, "pka_ick", &pka_ick), + CLK(NULL, "usb_fck", &usb_fck), + CLK("musb-omap2430", "ick", &usbhs_ick), + CLK(NULL, "usbhs_ick", &usbhs_ick), + CLK("omap_hsmmc.0", "ick", &mmchs1_ick), + CLK(NULL, "mmchs1_ick", &mmchs1_ick), + CLK(NULL, "mmchs1_fck", &mmchs1_fck), + CLK("omap_hsmmc.1", "ick", &mmchs2_ick), + CLK(NULL, "mmchs2_ick", &mmchs2_ick), + CLK(NULL, "mmchs2_fck", &mmchs2_fck), + CLK(NULL, "gpio5_ick", &gpio5_ick), + CLK(NULL, "gpio5_fck", &gpio5_fck), + CLK(NULL, "mdm_intc_ick", &mdm_intc_ick), + CLK("omap_hsmmc.0", "mmchsdb_fck", &mmchsdb1_fck), + CLK(NULL, "mmchsdb1_fck", &mmchsdb1_fck), + CLK("omap_hsmmc.1", "mmchsdb_fck", &mmchsdb2_fck), + CLK(NULL, "mmchsdb2_fck", &mmchsdb2_fck), + CLK(NULL, "timer_32k_ck", &func_32k_ck), + CLK(NULL, "timer_sys_ck", &sys_ck), + CLK(NULL, "timer_ext_ck", &alt_ck), + CLK(NULL, "cpufreq_ck", &virt_prcm_set), }; static const char *enable_init_clks[] = { @@ -2019,8 +2021,6 @@ static const char *enable_init_clks[] = { int __init omap2430_clk_init(void) { - struct omap_clk *c; - prcm_clksrc_ctrl = OMAP2430_PRCM_CLKSRC_CTRL; cpu_mask = RATE_IN_243X; rate_table = omap2430_rate_table; @@ -2029,12 +2029,7 @@ int __init omap2430_clk_init(void) omap2xxx_clkt_vps_check_bootloader_rates(); - for (c = omap2430_clks; c < omap2430_clks + ARRAY_SIZE(omap2430_clks); - c++) { - clkdev_add(&c->lk); - if (!__clk_init(NULL, c->lk.clk)) - omap2_init_clk_hw_omap_clocks(c->lk.clk); - } + omap_clocks_register(omap2430_clks, ARRAY_SIZE(omap2430_clks)); omap2xxx_clkt_vps_late_init(); diff --git a/arch/arm/mach-omap2/cclock33xx_data.c b/arch/arm/mach-omap2/cclock33xx_data.c index 476b82066cb6..6ebc7803bc3e 100644 --- a/arch/arm/mach-omap2/cclock33xx_data.c +++ b/arch/arm/mach-omap2/cclock33xx_data.c @@ -413,6 +413,14 @@ static struct clk smartreflex1_fck; DEFINE_STRUCT_CLK_HW_OMAP(smartreflex1_fck, NULL); DEFINE_STRUCT_CLK(smartreflex1_fck, dpll_core_ck_parents, clk_ops_null); +static struct clk sha0_fck; +DEFINE_STRUCT_CLK_HW_OMAP(sha0_fck, NULL); +DEFINE_STRUCT_CLK(sha0_fck, dpll_core_ck_parents, clk_ops_null); + +static struct clk aes0_fck; +DEFINE_STRUCT_CLK_HW_OMAP(aes0_fck, NULL); +DEFINE_STRUCT_CLK(aes0_fck, dpll_core_ck_parents, clk_ops_null); + /* * Modules clock nodes * @@ -838,80 +846,82 @@ DEFINE_STRUCT_CLK(wdt1_fck, wdt_ck_parents, gpio_fck_ops); * clkdev */ static struct omap_clk am33xx_clks[] = { - CLK(NULL, "clk_32768_ck", &clk_32768_ck, CK_AM33XX), - CLK(NULL, "clk_rc32k_ck", &clk_rc32k_ck, CK_AM33XX), - CLK(NULL, "virt_19200000_ck", &virt_19200000_ck, CK_AM33XX), - CLK(NULL, "virt_24000000_ck", &virt_24000000_ck, CK_AM33XX), - CLK(NULL, "virt_25000000_ck", &virt_25000000_ck, CK_AM33XX), - CLK(NULL, "virt_26000000_ck", &virt_26000000_ck, CK_AM33XX), - CLK(NULL, "sys_clkin_ck", &sys_clkin_ck, CK_AM33XX), - CLK(NULL, "tclkin_ck", &tclkin_ck, CK_AM33XX), - CLK(NULL, "dpll_core_ck", &dpll_core_ck, CK_AM33XX), - CLK(NULL, "dpll_core_x2_ck", &dpll_core_x2_ck, CK_AM33XX), - CLK(NULL, "dpll_core_m4_ck", &dpll_core_m4_ck, CK_AM33XX), - CLK(NULL, "dpll_core_m5_ck", &dpll_core_m5_ck, CK_AM33XX), - CLK(NULL, "dpll_core_m6_ck", &dpll_core_m6_ck, CK_AM33XX), - CLK(NULL, "dpll_mpu_ck", &dpll_mpu_ck, CK_AM33XX), - CLK("cpu0", NULL, &dpll_mpu_ck, CK_AM33XX), - CLK(NULL, "dpll_mpu_m2_ck", &dpll_mpu_m2_ck, CK_AM33XX), - CLK(NULL, "dpll_ddr_ck", &dpll_ddr_ck, CK_AM33XX), - CLK(NULL, "dpll_ddr_m2_ck", &dpll_ddr_m2_ck, CK_AM33XX), - CLK(NULL, "dpll_ddr_m2_div2_ck", &dpll_ddr_m2_div2_ck, CK_AM33XX), - CLK(NULL, "dpll_disp_ck", &dpll_disp_ck, CK_AM33XX), - CLK(NULL, "dpll_disp_m2_ck", &dpll_disp_m2_ck, CK_AM33XX), - CLK(NULL, "dpll_per_ck", &dpll_per_ck, CK_AM33XX), - CLK(NULL, "dpll_per_m2_ck", &dpll_per_m2_ck, CK_AM33XX), - CLK(NULL, "dpll_per_m2_div4_wkupdm_ck", &dpll_per_m2_div4_wkupdm_ck, CK_AM33XX), - CLK(NULL, "dpll_per_m2_div4_ck", &dpll_per_m2_div4_ck, CK_AM33XX), - CLK(NULL, "adc_tsc_fck", &adc_tsc_fck, CK_AM33XX), - CLK(NULL, "cefuse_fck", &cefuse_fck, CK_AM33XX), - CLK(NULL, "clkdiv32k_ck", &clkdiv32k_ck, CK_AM33XX), - CLK(NULL, "clkdiv32k_ick", &clkdiv32k_ick, CK_AM33XX), - CLK(NULL, "dcan0_fck", &dcan0_fck, CK_AM33XX), - CLK("481cc000.d_can", NULL, &dcan0_fck, CK_AM33XX), - CLK(NULL, "dcan1_fck", &dcan1_fck, CK_AM33XX), - CLK("481d0000.d_can", NULL, &dcan1_fck, CK_AM33XX), - CLK(NULL, "debugss_ick", &debugss_ick, CK_AM33XX), - CLK(NULL, "pruss_ocp_gclk", &pruss_ocp_gclk, CK_AM33XX), - CLK(NULL, "mcasp0_fck", &mcasp0_fck, CK_AM33XX), - CLK(NULL, "mcasp1_fck", &mcasp1_fck, CK_AM33XX), - CLK(NULL, "mmu_fck", &mmu_fck, CK_AM33XX), - CLK(NULL, "smartreflex0_fck", &smartreflex0_fck, CK_AM33XX), - CLK(NULL, "smartreflex1_fck", &smartreflex1_fck, CK_AM33XX), - CLK(NULL, "timer1_fck", &timer1_fck, CK_AM33XX), - CLK(NULL, "timer2_fck", &timer2_fck, CK_AM33XX), - CLK(NULL, "timer3_fck", &timer3_fck, CK_AM33XX), - CLK(NULL, "timer4_fck", &timer4_fck, CK_AM33XX), - CLK(NULL, "timer5_fck", &timer5_fck, CK_AM33XX), - CLK(NULL, "timer6_fck", &timer6_fck, CK_AM33XX), - CLK(NULL, "timer7_fck", &timer7_fck, CK_AM33XX), - CLK(NULL, "usbotg_fck", &usbotg_fck, CK_AM33XX), - CLK(NULL, "ieee5000_fck", &ieee5000_fck, CK_AM33XX), - CLK(NULL, "wdt1_fck", &wdt1_fck, CK_AM33XX), - CLK(NULL, "l4_rtc_gclk", &l4_rtc_gclk, CK_AM33XX), - CLK(NULL, "l3_gclk", &l3_gclk, CK_AM33XX), - CLK(NULL, "dpll_core_m4_div2_ck", &dpll_core_m4_div2_ck, CK_AM33XX), - CLK(NULL, "l4hs_gclk", &l4hs_gclk, CK_AM33XX), - CLK(NULL, "l3s_gclk", &l3s_gclk, CK_AM33XX), - CLK(NULL, "l4fw_gclk", &l4fw_gclk, CK_AM33XX), - CLK(NULL, "l4ls_gclk", &l4ls_gclk, CK_AM33XX), - CLK(NULL, "clk_24mhz", &clk_24mhz, CK_AM33XX), - CLK(NULL, "sysclk_div_ck", &sysclk_div_ck, CK_AM33XX), - CLK(NULL, "cpsw_125mhz_gclk", &cpsw_125mhz_gclk, CK_AM33XX), - CLK(NULL, "cpsw_cpts_rft_clk", &cpsw_cpts_rft_clk, CK_AM33XX), - CLK(NULL, "gpio0_dbclk_mux_ck", &gpio0_dbclk_mux_ck, CK_AM33XX), - CLK(NULL, "gpio0_dbclk", &gpio0_dbclk, CK_AM33XX), - CLK(NULL, "gpio1_dbclk", &gpio1_dbclk, CK_AM33XX), - CLK(NULL, "gpio2_dbclk", &gpio2_dbclk, CK_AM33XX), - CLK(NULL, "gpio3_dbclk", &gpio3_dbclk, CK_AM33XX), - CLK(NULL, "lcd_gclk", &lcd_gclk, CK_AM33XX), - CLK(NULL, "mmc_clk", &mmc_clk, CK_AM33XX), - CLK(NULL, "gfx_fclk_clksel_ck", &gfx_fclk_clksel_ck, CK_AM33XX), - CLK(NULL, "gfx_fck_div_ck", &gfx_fck_div_ck, CK_AM33XX), - CLK(NULL, "sysclkout_pre_ck", &sysclkout_pre_ck, CK_AM33XX), - CLK(NULL, "clkout2_div_ck", &clkout2_div_ck, CK_AM33XX), - CLK(NULL, "timer_32k_ck", &clkdiv32k_ick, CK_AM33XX), - CLK(NULL, "timer_sys_ck", &sys_clkin_ck, CK_AM33XX), + CLK(NULL, "clk_32768_ck", &clk_32768_ck), + CLK(NULL, "clk_rc32k_ck", &clk_rc32k_ck), + CLK(NULL, "virt_19200000_ck", &virt_19200000_ck), + CLK(NULL, "virt_24000000_ck", &virt_24000000_ck), + CLK(NULL, "virt_25000000_ck", &virt_25000000_ck), + CLK(NULL, "virt_26000000_ck", &virt_26000000_ck), + CLK(NULL, "sys_clkin_ck", &sys_clkin_ck), + CLK(NULL, "tclkin_ck", &tclkin_ck), + CLK(NULL, "dpll_core_ck", &dpll_core_ck), + CLK(NULL, "dpll_core_x2_ck", &dpll_core_x2_ck), + CLK(NULL, "dpll_core_m4_ck", &dpll_core_m4_ck), + CLK(NULL, "dpll_core_m5_ck", &dpll_core_m5_ck), + CLK(NULL, "dpll_core_m6_ck", &dpll_core_m6_ck), + CLK(NULL, "dpll_mpu_ck", &dpll_mpu_ck), + CLK("cpu0", NULL, &dpll_mpu_ck), + CLK(NULL, "dpll_mpu_m2_ck", &dpll_mpu_m2_ck), + CLK(NULL, "dpll_ddr_ck", &dpll_ddr_ck), + CLK(NULL, "dpll_ddr_m2_ck", &dpll_ddr_m2_ck), + CLK(NULL, "dpll_ddr_m2_div2_ck", &dpll_ddr_m2_div2_ck), + CLK(NULL, "dpll_disp_ck", &dpll_disp_ck), + CLK(NULL, "dpll_disp_m2_ck", &dpll_disp_m2_ck), + CLK(NULL, "dpll_per_ck", &dpll_per_ck), + CLK(NULL, "dpll_per_m2_ck", &dpll_per_m2_ck), + CLK(NULL, "dpll_per_m2_div4_wkupdm_ck", &dpll_per_m2_div4_wkupdm_ck), + CLK(NULL, "dpll_per_m2_div4_ck", &dpll_per_m2_div4_ck), + CLK(NULL, "adc_tsc_fck", &adc_tsc_fck), + CLK(NULL, "cefuse_fck", &cefuse_fck), + CLK(NULL, "clkdiv32k_ck", &clkdiv32k_ck), + CLK(NULL, "clkdiv32k_ick", &clkdiv32k_ick), + CLK(NULL, "dcan0_fck", &dcan0_fck), + CLK("481cc000.d_can", NULL, &dcan0_fck), + CLK(NULL, "dcan1_fck", &dcan1_fck), + CLK("481d0000.d_can", NULL, &dcan1_fck), + CLK(NULL, "debugss_ick", &debugss_ick), + CLK(NULL, "pruss_ocp_gclk", &pruss_ocp_gclk), + CLK(NULL, "mcasp0_fck", &mcasp0_fck), + CLK(NULL, "mcasp1_fck", &mcasp1_fck), + CLK(NULL, "mmu_fck", &mmu_fck), + CLK(NULL, "smartreflex0_fck", &smartreflex0_fck), + CLK(NULL, "smartreflex1_fck", &smartreflex1_fck), + CLK(NULL, "sha0_fck", &sha0_fck), + CLK(NULL, "aes0_fck", &aes0_fck), + CLK(NULL, "timer1_fck", &timer1_fck), + CLK(NULL, "timer2_fck", &timer2_fck), + CLK(NULL, "timer3_fck", &timer3_fck), + CLK(NULL, "timer4_fck", &timer4_fck), + CLK(NULL, "timer5_fck", &timer5_fck), + CLK(NULL, "timer6_fck", &timer6_fck), + CLK(NULL, "timer7_fck", &timer7_fck), + CLK(NULL, "usbotg_fck", &usbotg_fck), + CLK(NULL, "ieee5000_fck", &ieee5000_fck), + CLK(NULL, "wdt1_fck", &wdt1_fck), + CLK(NULL, "l4_rtc_gclk", &l4_rtc_gclk), + CLK(NULL, "l3_gclk", &l3_gclk), + CLK(NULL, "dpll_core_m4_div2_ck", &dpll_core_m4_div2_ck), + CLK(NULL, "l4hs_gclk", &l4hs_gclk), + CLK(NULL, "l3s_gclk", &l3s_gclk), + CLK(NULL, "l4fw_gclk", &l4fw_gclk), + CLK(NULL, "l4ls_gclk", &l4ls_gclk), + CLK(NULL, "clk_24mhz", &clk_24mhz), + CLK(NULL, "sysclk_div_ck", &sysclk_div_ck), + CLK(NULL, "cpsw_125mhz_gclk", &cpsw_125mhz_gclk), + CLK(NULL, "cpsw_cpts_rft_clk", &cpsw_cpts_rft_clk), + CLK(NULL, "gpio0_dbclk_mux_ck", &gpio0_dbclk_mux_ck), + CLK(NULL, "gpio0_dbclk", &gpio0_dbclk), + CLK(NULL, "gpio1_dbclk", &gpio1_dbclk), + CLK(NULL, "gpio2_dbclk", &gpio2_dbclk), + CLK(NULL, "gpio3_dbclk", &gpio3_dbclk), + CLK(NULL, "lcd_gclk", &lcd_gclk), + CLK(NULL, "mmc_clk", &mmc_clk), + CLK(NULL, "gfx_fclk_clksel_ck", &gfx_fclk_clksel_ck), + CLK(NULL, "gfx_fck_div_ck", &gfx_fck_div_ck), + CLK(NULL, "sysclkout_pre_ck", &sysclkout_pre_ck), + CLK(NULL, "clkout2_div_ck", &clkout2_div_ck), + CLK(NULL, "timer_32k_ck", &clkdiv32k_ick), + CLK(NULL, "timer_sys_ck", &sys_clkin_ck), }; @@ -926,21 +936,10 @@ static const char *enable_init_clks[] = { int __init am33xx_clk_init(void) { - struct omap_clk *c; - u32 cpu_clkflg; - - if (soc_is_am33xx()) { + if (soc_is_am33xx()) cpu_mask = RATE_IN_AM33XX; - cpu_clkflg = CK_AM33XX; - } - for (c = am33xx_clks; c < am33xx_clks + ARRAY_SIZE(am33xx_clks); c++) { - if (c->cpu & cpu_clkflg) { - clkdev_add(&c->lk); - if (!__clk_init(NULL, c->lk.clk)) - omap2_init_clk_hw_omap_clocks(c->lk.clk); - } - } + omap_clocks_register(am33xx_clks, ARRAY_SIZE(am33xx_clks)); omap2_clk_disable_autoidle_all(); @@ -958,6 +957,14 @@ int __init am33xx_clk_init(void) clk_set_parent(&timer3_fck, &sys_clkin_ck); clk_set_parent(&timer6_fck, &sys_clkin_ck); + /* + * The On-Chip 32K RC Osc clock is not an accurate clock-source as per + * the design/spec, so as a result, for example, timer which supposed + * to get expired @60Sec, but will expire somewhere ~@40Sec, which is + * not expected by any use-case, so change WDT1 clock source to PRCM + * 32KHz clock. + */ + clk_set_parent(&wdt1_fck, &clkdiv32k_ick); return 0; } diff --git a/arch/arm/mach-omap2/cclock3xxx_data.c b/arch/arm/mach-omap2/cclock3xxx_data.c index 4579c3c5338f..45cd26430d1f 100644 --- a/arch/arm/mach-omap2/cclock3xxx_data.c +++ b/arch/arm/mach-omap2/cclock3xxx_data.c @@ -3219,289 +3219,327 @@ static struct clk_hw_omap wdt3_ick_hw = { DEFINE_STRUCT_CLK(wdt3_ick, gpio2_ick_parent_names, aes2_ick_ops); /* - * clkdev + * clocks specific to omap3430es1 + */ +static struct omap_clk omap3430es1_clks[] = { + CLK(NULL, "gfx_l3_ck", &gfx_l3_ck), + CLK(NULL, "gfx_l3_fck", &gfx_l3_fck), + CLK(NULL, "gfx_l3_ick", &gfx_l3_ick), + CLK(NULL, "gfx_cg1_ck", &gfx_cg1_ck), + CLK(NULL, "gfx_cg2_ck", &gfx_cg2_ck), + CLK(NULL, "d2d_26m_fck", &d2d_26m_fck), + CLK(NULL, "fshostusb_fck", &fshostusb_fck), + CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck_3430es1), + CLK(NULL, "ssi_sst_fck", &ssi_sst_fck_3430es1), + CLK("musb-omap2430", "ick", &hsotgusb_ick_3430es1), + CLK(NULL, "hsotgusb_ick", &hsotgusb_ick_3430es1), + CLK(NULL, "fac_ick", &fac_ick), + CLK(NULL, "ssi_ick", &ssi_ick_3430es1), + CLK(NULL, "usb_l4_ick", &usb_l4_ick), + CLK(NULL, "dss1_alwon_fck", &dss1_alwon_fck_3430es1), + CLK("omapdss_dss", "ick", &dss_ick_3430es1), + CLK(NULL, "dss_ick", &dss_ick_3430es1), +}; + +/* + * clocks specific to am35xx + */ +static struct omap_clk am35xx_clks[] = { + CLK(NULL, "ipss_ick", &ipss_ick), + CLK(NULL, "rmii_ck", &rmii_ck), + CLK(NULL, "pclk_ck", &pclk_ck), + CLK(NULL, "emac_ick", &emac_ick), + CLK(NULL, "emac_fck", &emac_fck), + CLK("davinci_emac.0", NULL, &emac_ick), + CLK("davinci_mdio.0", NULL, &emac_fck), + CLK("vpfe-capture", "master", &vpfe_ick), + CLK("vpfe-capture", "slave", &vpfe_fck), + CLK(NULL, "hsotgusb_ick", &hsotgusb_ick_am35xx), + CLK(NULL, "hsotgusb_fck", &hsotgusb_fck_am35xx), + CLK(NULL, "hecc_ck", &hecc_ck), + CLK(NULL, "uart4_ick", &uart4_ick_am35xx), + CLK(NULL, "uart4_fck", &uart4_fck_am35xx), +}; + +/* + * clocks specific to omap36xx + */ +static struct omap_clk omap36xx_clks[] = { + CLK(NULL, "omap_192m_alwon_fck", &omap_192m_alwon_fck), + CLK(NULL, "uart4_fck", &uart4_fck), +}; + +/* + * clocks common to omap36xx omap34xx + */ +static struct omap_clk omap34xx_omap36xx_clks[] = { + CLK(NULL, "aes1_ick", &aes1_ick), + CLK("omap_rng", "ick", &rng_ick), + CLK(NULL, "sha11_ick", &sha11_ick), + CLK(NULL, "des1_ick", &des1_ick), + CLK(NULL, "cam_mclk", &cam_mclk), + CLK(NULL, "cam_ick", &cam_ick), + CLK(NULL, "csi2_96m_fck", &csi2_96m_fck), + CLK(NULL, "security_l3_ick", &security_l3_ick), + CLK(NULL, "pka_ick", &pka_ick), + CLK(NULL, "icr_ick", &icr_ick), + CLK("omap-aes", "ick", &aes2_ick), + CLK("omap-sham", "ick", &sha12_ick), + CLK(NULL, "des2_ick", &des2_ick), + CLK(NULL, "mspro_ick", &mspro_ick), + CLK(NULL, "mailboxes_ick", &mailboxes_ick), + CLK(NULL, "ssi_l4_ick", &ssi_l4_ick), + CLK(NULL, "sr1_fck", &sr1_fck), + CLK(NULL, "sr2_fck", &sr2_fck), + CLK(NULL, "sr_l4_ick", &sr_l4_ick), + CLK(NULL, "security_l4_ick2", &security_l4_ick2), + CLK(NULL, "wkup_l4_ick", &wkup_l4_ick), + CLK(NULL, "dpll2_fck", &dpll2_fck), + CLK(NULL, "iva2_ck", &iva2_ck), + CLK(NULL, "modem_fck", &modem_fck), + CLK(NULL, "sad2d_ick", &sad2d_ick), + CLK(NULL, "mad2d_ick", &mad2d_ick), + CLK(NULL, "mspro_fck", &mspro_fck), + CLK(NULL, "dpll2_ck", &dpll2_ck), + CLK(NULL, "dpll2_m2_ck", &dpll2_m2_ck), +}; + +/* + * clocks common to omap36xx and omap3430es2plus + */ +static struct omap_clk omap36xx_omap3430es2plus_clks[] = { + CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck_3430es2), + CLK(NULL, "ssi_sst_fck", &ssi_sst_fck_3430es2), + CLK("musb-omap2430", "ick", &hsotgusb_ick_3430es2), + CLK(NULL, "hsotgusb_ick", &hsotgusb_ick_3430es2), + CLK(NULL, "ssi_ick", &ssi_ick_3430es2), + CLK(NULL, "usim_fck", &usim_fck), + CLK(NULL, "usim_ick", &usim_ick), +}; + +/* + * clocks common to am35xx omap36xx and omap3430es2plus + */ +static struct omap_clk omap36xx_am35xx_omap3430es2plus_clks[] = { + CLK(NULL, "virt_16_8m_ck", &virt_16_8m_ck), + CLK(NULL, "dpll5_ck", &dpll5_ck), + CLK(NULL, "dpll5_m2_ck", &dpll5_m2_ck), + CLK(NULL, "sgx_fck", &sgx_fck), + CLK(NULL, "sgx_ick", &sgx_ick), + CLK(NULL, "cpefuse_fck", &cpefuse_fck), + CLK(NULL, "ts_fck", &ts_fck), + CLK(NULL, "usbtll_fck", &usbtll_fck), + CLK("usbhs_omap", "usbtll_fck", &usbtll_fck), + CLK("usbhs_tll", "usbtll_fck", &usbtll_fck), + CLK(NULL, "usbtll_ick", &usbtll_ick), + CLK("usbhs_omap", "usbtll_ick", &usbtll_ick), + CLK("usbhs_tll", "usbtll_ick", &usbtll_ick), + CLK("omap_hsmmc.2", "ick", &mmchs3_ick), + CLK(NULL, "mmchs3_ick", &mmchs3_ick), + CLK(NULL, "mmchs3_fck", &mmchs3_fck), + CLK(NULL, "dss1_alwon_fck", &dss1_alwon_fck_3430es2), + CLK("omapdss_dss", "ick", &dss_ick_3430es2), + CLK(NULL, "dss_ick", &dss_ick_3430es2), + CLK(NULL, "usbhost_120m_fck", &usbhost_120m_fck), + CLK(NULL, "usbhost_48m_fck", &usbhost_48m_fck), + CLK(NULL, "usbhost_ick", &usbhost_ick), + CLK("usbhs_omap", "usbhost_ick", &usbhost_ick), +}; + +/* + * common clocks */ static struct omap_clk omap3xxx_clks[] = { - CLK(NULL, "apb_pclk", &dummy_apb_pclk, CK_3XXX), - CLK(NULL, "omap_32k_fck", &omap_32k_fck, CK_3XXX), - CLK(NULL, "virt_12m_ck", &virt_12m_ck, CK_3XXX), - CLK(NULL, "virt_13m_ck", &virt_13m_ck, CK_3XXX), - CLK(NULL, "virt_16_8m_ck", &virt_16_8m_ck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK(NULL, "virt_19200000_ck", &virt_19200000_ck, CK_3XXX), - CLK(NULL, "virt_26000000_ck", &virt_26000000_ck, CK_3XXX), - CLK(NULL, "virt_38_4m_ck", &virt_38_4m_ck, CK_3XXX), - CLK(NULL, "osc_sys_ck", &osc_sys_ck, CK_3XXX), - CLK("twl", "fck", &osc_sys_ck, CK_3XXX), - CLK(NULL, "sys_ck", &sys_ck, CK_3XXX), - CLK(NULL, "sys_altclk", &sys_altclk, CK_3XXX), - CLK(NULL, "mcbsp_clks", &mcbsp_clks, CK_3XXX), - CLK(NULL, "sys_clkout1", &sys_clkout1, CK_3XXX), - CLK(NULL, "dpll1_ck", &dpll1_ck, CK_3XXX), - CLK(NULL, "dpll1_x2_ck", &dpll1_x2_ck, CK_3XXX), - CLK(NULL, "dpll1_x2m2_ck", &dpll1_x2m2_ck, CK_3XXX), - CLK(NULL, "dpll2_ck", &dpll2_ck, CK_34XX | CK_36XX), - CLK(NULL, "dpll2_m2_ck", &dpll2_m2_ck, CK_34XX | CK_36XX), - CLK(NULL, "dpll3_ck", &dpll3_ck, CK_3XXX), - CLK(NULL, "core_ck", &core_ck, CK_3XXX), - CLK(NULL, "dpll3_x2_ck", &dpll3_x2_ck, CK_3XXX), - CLK(NULL, "dpll3_m2_ck", &dpll3_m2_ck, CK_3XXX), - CLK(NULL, "dpll3_m2x2_ck", &dpll3_m2x2_ck, CK_3XXX), - CLK(NULL, "dpll3_m3_ck", &dpll3_m3_ck, CK_3XXX), - CLK(NULL, "dpll3_m3x2_ck", &dpll3_m3x2_ck, CK_3XXX), - CLK("etb", "emu_core_alwon_ck", &emu_core_alwon_ck, CK_3XXX), - CLK(NULL, "dpll4_ck", &dpll4_ck, CK_3XXX), - CLK(NULL, "dpll4_x2_ck", &dpll4_x2_ck, CK_3XXX), - CLK(NULL, "omap_192m_alwon_fck", &omap_192m_alwon_fck, CK_36XX), - CLK(NULL, "omap_96m_alwon_fck", &omap_96m_alwon_fck, CK_3XXX), - CLK(NULL, "omap_96m_fck", &omap_96m_fck, CK_3XXX), - CLK(NULL, "cm_96m_fck", &cm_96m_fck, CK_3XXX), - CLK(NULL, "omap_54m_fck", &omap_54m_fck, CK_3XXX), - CLK(NULL, "omap_48m_fck", &omap_48m_fck, CK_3XXX), - CLK(NULL, "omap_12m_fck", &omap_12m_fck, CK_3XXX), - CLK(NULL, "dpll4_m2_ck", &dpll4_m2_ck, CK_3XXX), - CLK(NULL, "dpll4_m2x2_ck", &dpll4_m2x2_ck, CK_3XXX), - CLK(NULL, "dpll4_m3_ck", &dpll4_m3_ck, CK_3XXX), - CLK(NULL, "dpll4_m3x2_ck", &dpll4_m3x2_ck, CK_3XXX), - CLK(NULL, "dpll4_m4_ck", &dpll4_m4_ck, CK_3XXX), - CLK(NULL, "dpll4_m4x2_ck", &dpll4_m4x2_ck, CK_3XXX), - CLK(NULL, "dpll4_m5_ck", &dpll4_m5_ck, CK_3XXX), - CLK(NULL, "dpll4_m5x2_ck", &dpll4_m5x2_ck, CK_3XXX), - CLK(NULL, "dpll4_m6_ck", &dpll4_m6_ck, CK_3XXX), - CLK(NULL, "dpll4_m6x2_ck", &dpll4_m6x2_ck, CK_3XXX), - CLK("etb", "emu_per_alwon_ck", &emu_per_alwon_ck, CK_3XXX), - CLK(NULL, "dpll5_ck", &dpll5_ck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK(NULL, "dpll5_m2_ck", &dpll5_m2_ck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK(NULL, "clkout2_src_ck", &clkout2_src_ck, CK_3XXX), - CLK(NULL, "sys_clkout2", &sys_clkout2, CK_3XXX), - CLK(NULL, "corex2_fck", &corex2_fck, CK_3XXX), - CLK(NULL, "dpll1_fck", &dpll1_fck, CK_3XXX), - CLK(NULL, "mpu_ck", &mpu_ck, CK_3XXX), - CLK(NULL, "arm_fck", &arm_fck, CK_3XXX), - CLK("etb", "emu_mpu_alwon_ck", &emu_mpu_alwon_ck, CK_3XXX), - CLK(NULL, "dpll2_fck", &dpll2_fck, CK_34XX | CK_36XX), - CLK(NULL, "iva2_ck", &iva2_ck, CK_34XX | CK_36XX), - CLK(NULL, "l3_ick", &l3_ick, CK_3XXX), - CLK(NULL, "l4_ick", &l4_ick, CK_3XXX), - CLK(NULL, "rm_ick", &rm_ick, CK_3XXX), - CLK(NULL, "gfx_l3_ck", &gfx_l3_ck, CK_3430ES1), - CLK(NULL, "gfx_l3_fck", &gfx_l3_fck, CK_3430ES1), - CLK(NULL, "gfx_l3_ick", &gfx_l3_ick, CK_3430ES1), - CLK(NULL, "gfx_cg1_ck", &gfx_cg1_ck, CK_3430ES1), - CLK(NULL, "gfx_cg2_ck", &gfx_cg2_ck, CK_3430ES1), - CLK(NULL, "sgx_fck", &sgx_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK(NULL, "sgx_ick", &sgx_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK(NULL, "d2d_26m_fck", &d2d_26m_fck, CK_3430ES1), - CLK(NULL, "modem_fck", &modem_fck, CK_34XX | CK_36XX), - CLK(NULL, "sad2d_ick", &sad2d_ick, CK_34XX | CK_36XX), - CLK(NULL, "mad2d_ick", &mad2d_ick, CK_34XX | CK_36XX), - CLK(NULL, "gpt10_fck", &gpt10_fck, CK_3XXX), - CLK(NULL, "gpt11_fck", &gpt11_fck, CK_3XXX), - CLK(NULL, "cpefuse_fck", &cpefuse_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK(NULL, "ts_fck", &ts_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK(NULL, "usbtll_fck", &usbtll_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("usbhs_omap", "usbtll_fck", &usbtll_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("usbhs_tll", "usbtll_fck", &usbtll_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK(NULL, "core_96m_fck", &core_96m_fck, CK_3XXX), - CLK(NULL, "mmchs3_fck", &mmchs3_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK(NULL, "mmchs2_fck", &mmchs2_fck, CK_3XXX), - CLK(NULL, "mspro_fck", &mspro_fck, CK_34XX | CK_36XX), - CLK(NULL, "mmchs1_fck", &mmchs1_fck, CK_3XXX), - CLK(NULL, "i2c3_fck", &i2c3_fck, CK_3XXX), - CLK(NULL, "i2c2_fck", &i2c2_fck, CK_3XXX), - CLK(NULL, "i2c1_fck", &i2c1_fck, CK_3XXX), - CLK(NULL, "mcbsp5_fck", &mcbsp5_fck, CK_3XXX), - CLK(NULL, "mcbsp1_fck", &mcbsp1_fck, CK_3XXX), - CLK(NULL, "core_48m_fck", &core_48m_fck, CK_3XXX), - CLK(NULL, "mcspi4_fck", &mcspi4_fck, CK_3XXX), - CLK(NULL, "mcspi3_fck", &mcspi3_fck, CK_3XXX), - CLK(NULL, "mcspi2_fck", &mcspi2_fck, CK_3XXX), - CLK(NULL, "mcspi1_fck", &mcspi1_fck, CK_3XXX), - CLK(NULL, "uart2_fck", &uart2_fck, CK_3XXX), - CLK(NULL, "uart1_fck", &uart1_fck, CK_3XXX), - CLK(NULL, "fshostusb_fck", &fshostusb_fck, CK_3430ES1), - CLK(NULL, "core_12m_fck", &core_12m_fck, CK_3XXX), - CLK("omap_hdq.0", "fck", &hdq_fck, CK_3XXX), - CLK(NULL, "hdq_fck", &hdq_fck, CK_3XXX), - CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck_3430es1, CK_3430ES1), - CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck_3430es2, CK_3430ES2PLUS | CK_36XX), - CLK(NULL, "ssi_sst_fck", &ssi_sst_fck_3430es1, CK_3430ES1), - CLK(NULL, "ssi_sst_fck", &ssi_sst_fck_3430es2, CK_3430ES2PLUS | CK_36XX), - CLK(NULL, "core_l3_ick", &core_l3_ick, CK_3XXX), - CLK("musb-omap2430", "ick", &hsotgusb_ick_3430es1, CK_3430ES1), - CLK("musb-omap2430", "ick", &hsotgusb_ick_3430es2, CK_3430ES2PLUS | CK_36XX), - CLK(NULL, "hsotgusb_ick", &hsotgusb_ick_3430es1, CK_3430ES1), - CLK(NULL, "hsotgusb_ick", &hsotgusb_ick_3430es2, CK_3430ES2PLUS | CK_36XX), - CLK(NULL, "sdrc_ick", &sdrc_ick, CK_3XXX), - CLK(NULL, "gpmc_fck", &gpmc_fck, CK_3XXX), - CLK(NULL, "security_l3_ick", &security_l3_ick, CK_34XX | CK_36XX), - CLK(NULL, "pka_ick", &pka_ick, CK_34XX | CK_36XX), - CLK(NULL, "core_l4_ick", &core_l4_ick, CK_3XXX), - CLK(NULL, "usbtll_ick", &usbtll_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("usbhs_omap", "usbtll_ick", &usbtll_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("usbhs_tll", "usbtll_ick", &usbtll_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("omap_hsmmc.2", "ick", &mmchs3_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK(NULL, "mmchs3_ick", &mmchs3_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK(NULL, "icr_ick", &icr_ick, CK_34XX | CK_36XX), - CLK("omap-aes", "ick", &aes2_ick, CK_34XX | CK_36XX), - CLK("omap-sham", "ick", &sha12_ick, CK_34XX | CK_36XX), - CLK(NULL, "des2_ick", &des2_ick, CK_34XX | CK_36XX), - CLK("omap_hsmmc.1", "ick", &mmchs2_ick, CK_3XXX), - CLK("omap_hsmmc.0", "ick", &mmchs1_ick, CK_3XXX), - CLK(NULL, "mmchs2_ick", &mmchs2_ick, CK_3XXX), - CLK(NULL, "mmchs1_ick", &mmchs1_ick, CK_3XXX), - CLK(NULL, "mspro_ick", &mspro_ick, CK_34XX | CK_36XX), - CLK("omap_hdq.0", "ick", &hdq_ick, CK_3XXX), - CLK(NULL, "hdq_ick", &hdq_ick, CK_3XXX), - CLK("omap2_mcspi.4", "ick", &mcspi4_ick, CK_3XXX), - CLK("omap2_mcspi.3", "ick", &mcspi3_ick, CK_3XXX), - CLK("omap2_mcspi.2", "ick", &mcspi2_ick, CK_3XXX), - CLK("omap2_mcspi.1", "ick", &mcspi1_ick, CK_3XXX), - CLK(NULL, "mcspi4_ick", &mcspi4_ick, CK_3XXX), - CLK(NULL, "mcspi3_ick", &mcspi3_ick, CK_3XXX), - CLK(NULL, "mcspi2_ick", &mcspi2_ick, CK_3XXX), - CLK(NULL, "mcspi1_ick", &mcspi1_ick, CK_3XXX), - CLK("omap_i2c.3", "ick", &i2c3_ick, CK_3XXX), - CLK("omap_i2c.2", "ick", &i2c2_ick, CK_3XXX), - CLK("omap_i2c.1", "ick", &i2c1_ick, CK_3XXX), - CLK(NULL, "i2c3_ick", &i2c3_ick, CK_3XXX), - CLK(NULL, "i2c2_ick", &i2c2_ick, CK_3XXX), - CLK(NULL, "i2c1_ick", &i2c1_ick, CK_3XXX), - CLK(NULL, "uart2_ick", &uart2_ick, CK_3XXX), - CLK(NULL, "uart1_ick", &uart1_ick, CK_3XXX), - CLK(NULL, "gpt11_ick", &gpt11_ick, CK_3XXX), - CLK(NULL, "gpt10_ick", &gpt10_ick, CK_3XXX), - CLK("omap-mcbsp.5", "ick", &mcbsp5_ick, CK_3XXX), - CLK("omap-mcbsp.1", "ick", &mcbsp1_ick, CK_3XXX), - CLK(NULL, "mcbsp5_ick", &mcbsp5_ick, CK_3XXX), - CLK(NULL, "mcbsp1_ick", &mcbsp1_ick, CK_3XXX), - CLK(NULL, "fac_ick", &fac_ick, CK_3430ES1), - CLK(NULL, "mailboxes_ick", &mailboxes_ick, CK_34XX | CK_36XX), - CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_3XXX), - CLK(NULL, "ssi_l4_ick", &ssi_l4_ick, CK_34XX | CK_36XX), - CLK(NULL, "ssi_ick", &ssi_ick_3430es1, CK_3430ES1), - CLK(NULL, "ssi_ick", &ssi_ick_3430es2, CK_3430ES2PLUS | CK_36XX), - CLK(NULL, "usb_l4_ick", &usb_l4_ick, CK_3430ES1), - CLK(NULL, "security_l4_ick2", &security_l4_ick2, CK_34XX | CK_36XX), - CLK(NULL, "aes1_ick", &aes1_ick, CK_34XX | CK_36XX), - CLK("omap_rng", "ick", &rng_ick, CK_34XX | CK_36XX), - CLK(NULL, "sha11_ick", &sha11_ick, CK_34XX | CK_36XX), - CLK(NULL, "des1_ick", &des1_ick, CK_34XX | CK_36XX), - CLK(NULL, "dss1_alwon_fck", &dss1_alwon_fck_3430es1, CK_3430ES1), - CLK(NULL, "dss1_alwon_fck", &dss1_alwon_fck_3430es2, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK(NULL, "dss_tv_fck", &dss_tv_fck, CK_3XXX), - CLK(NULL, "dss_96m_fck", &dss_96m_fck, CK_3XXX), - CLK(NULL, "dss2_alwon_fck", &dss2_alwon_fck, CK_3XXX), - CLK("omapdss_dss", "ick", &dss_ick_3430es1, CK_3430ES1), - CLK(NULL, "dss_ick", &dss_ick_3430es1, CK_3430ES1), - CLK("omapdss_dss", "ick", &dss_ick_3430es2, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK(NULL, "dss_ick", &dss_ick_3430es2, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK(NULL, "cam_mclk", &cam_mclk, CK_34XX | CK_36XX), - CLK(NULL, "cam_ick", &cam_ick, CK_34XX | CK_36XX), - CLK(NULL, "csi2_96m_fck", &csi2_96m_fck, CK_34XX | CK_36XX), - CLK(NULL, "usbhost_120m_fck", &usbhost_120m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK(NULL, "usbhost_48m_fck", &usbhost_48m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK(NULL, "usbhost_ick", &usbhost_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("usbhs_omap", "usbhost_ick", &usbhost_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK(NULL, "utmi_p1_gfclk", &dummy_ck, CK_3XXX), - CLK(NULL, "utmi_p2_gfclk", &dummy_ck, CK_3XXX), - CLK(NULL, "xclk60mhsp1_ck", &dummy_ck, CK_3XXX), - CLK(NULL, "xclk60mhsp2_ck", &dummy_ck, CK_3XXX), - CLK(NULL, "usb_host_hs_utmi_p1_clk", &dummy_ck, CK_3XXX), - CLK(NULL, "usb_host_hs_utmi_p2_clk", &dummy_ck, CK_3XXX), - CLK("usbhs_omap", "usb_tll_hs_usb_ch0_clk", &dummy_ck, CK_3XXX), - CLK("usbhs_omap", "usb_tll_hs_usb_ch1_clk", &dummy_ck, CK_3XXX), - CLK("usbhs_tll", "usb_tll_hs_usb_ch0_clk", &dummy_ck, CK_3XXX), - CLK("usbhs_tll", "usb_tll_hs_usb_ch1_clk", &dummy_ck, CK_3XXX), - CLK(NULL, "init_60m_fclk", &dummy_ck, CK_3XXX), - CLK(NULL, "usim_fck", &usim_fck, CK_3430ES2PLUS | CK_36XX), - CLK(NULL, "gpt1_fck", &gpt1_fck, CK_3XXX), - CLK(NULL, "wkup_32k_fck", &wkup_32k_fck, CK_3XXX), - CLK(NULL, "gpio1_dbck", &gpio1_dbck, CK_3XXX), - CLK(NULL, "wdt2_fck", &wdt2_fck, CK_3XXX), - CLK(NULL, "wkup_l4_ick", &wkup_l4_ick, CK_34XX | CK_36XX), - CLK(NULL, "usim_ick", &usim_ick, CK_3430ES2PLUS | CK_36XX), - CLK("omap_wdt", "ick", &wdt2_ick, CK_3XXX), - CLK(NULL, "wdt2_ick", &wdt2_ick, CK_3XXX), - CLK(NULL, "wdt1_ick", &wdt1_ick, CK_3XXX), - CLK(NULL, "gpio1_ick", &gpio1_ick, CK_3XXX), - CLK(NULL, "omap_32ksync_ick", &omap_32ksync_ick, CK_3XXX), - CLK(NULL, "gpt12_ick", &gpt12_ick, CK_3XXX), - CLK(NULL, "gpt1_ick", &gpt1_ick, CK_3XXX), - CLK(NULL, "per_96m_fck", &per_96m_fck, CK_3XXX), - CLK(NULL, "per_48m_fck", &per_48m_fck, CK_3XXX), - CLK(NULL, "uart3_fck", &uart3_fck, CK_3XXX), - CLK(NULL, "uart4_fck", &uart4_fck, CK_36XX), - CLK(NULL, "uart4_fck", &uart4_fck_am35xx, CK_AM35XX), - CLK(NULL, "gpt2_fck", &gpt2_fck, CK_3XXX), - CLK(NULL, "gpt3_fck", &gpt3_fck, CK_3XXX), - CLK(NULL, "gpt4_fck", &gpt4_fck, CK_3XXX), - CLK(NULL, "gpt5_fck", &gpt5_fck, CK_3XXX), - CLK(NULL, "gpt6_fck", &gpt6_fck, CK_3XXX), - CLK(NULL, "gpt7_fck", &gpt7_fck, CK_3XXX), - CLK(NULL, "gpt8_fck", &gpt8_fck, CK_3XXX), - CLK(NULL, "gpt9_fck", &gpt9_fck, CK_3XXX), - CLK(NULL, "per_32k_alwon_fck", &per_32k_alwon_fck, CK_3XXX), - CLK(NULL, "gpio6_dbck", &gpio6_dbck, CK_3XXX), - CLK(NULL, "gpio5_dbck", &gpio5_dbck, CK_3XXX), - CLK(NULL, "gpio4_dbck", &gpio4_dbck, CK_3XXX), - CLK(NULL, "gpio3_dbck", &gpio3_dbck, CK_3XXX), - CLK(NULL, "gpio2_dbck", &gpio2_dbck, CK_3XXX), - CLK(NULL, "wdt3_fck", &wdt3_fck, CK_3XXX), - CLK(NULL, "per_l4_ick", &per_l4_ick, CK_3XXX), - CLK(NULL, "gpio6_ick", &gpio6_ick, CK_3XXX), - CLK(NULL, "gpio5_ick", &gpio5_ick, CK_3XXX), - CLK(NULL, "gpio4_ick", &gpio4_ick, CK_3XXX), - CLK(NULL, "gpio3_ick", &gpio3_ick, CK_3XXX), - CLK(NULL, "gpio2_ick", &gpio2_ick, CK_3XXX), - CLK(NULL, "wdt3_ick", &wdt3_ick, CK_3XXX), - CLK(NULL, "uart3_ick", &uart3_ick, CK_3XXX), - CLK(NULL, "uart4_ick", &uart4_ick, CK_36XX), - CLK(NULL, "gpt9_ick", &gpt9_ick, CK_3XXX), - CLK(NULL, "gpt8_ick", &gpt8_ick, CK_3XXX), - CLK(NULL, "gpt7_ick", &gpt7_ick, CK_3XXX), - CLK(NULL, "gpt6_ick", &gpt6_ick, CK_3XXX), - CLK(NULL, "gpt5_ick", &gpt5_ick, CK_3XXX), - CLK(NULL, "gpt4_ick", &gpt4_ick, CK_3XXX), - CLK(NULL, "gpt3_ick", &gpt3_ick, CK_3XXX), - CLK(NULL, "gpt2_ick", &gpt2_ick, CK_3XXX), - CLK("omap-mcbsp.2", "ick", &mcbsp2_ick, CK_3XXX), - CLK("omap-mcbsp.3", "ick", &mcbsp3_ick, CK_3XXX), - CLK("omap-mcbsp.4", "ick", &mcbsp4_ick, CK_3XXX), - CLK(NULL, "mcbsp4_ick", &mcbsp2_ick, CK_3XXX), - CLK(NULL, "mcbsp3_ick", &mcbsp3_ick, CK_3XXX), - CLK(NULL, "mcbsp2_ick", &mcbsp4_ick, CK_3XXX), - CLK(NULL, "mcbsp2_fck", &mcbsp2_fck, CK_3XXX), - CLK(NULL, "mcbsp3_fck", &mcbsp3_fck, CK_3XXX), - CLK(NULL, "mcbsp4_fck", &mcbsp4_fck, CK_3XXX), - CLK("etb", "emu_src_ck", &emu_src_ck, CK_3XXX), - CLK(NULL, "emu_src_ck", &emu_src_ck, CK_3XXX), - CLK(NULL, "pclk_fck", &pclk_fck, CK_3XXX), - CLK(NULL, "pclkx2_fck", &pclkx2_fck, CK_3XXX), - CLK(NULL, "atclk_fck", &atclk_fck, CK_3XXX), - CLK(NULL, "traceclk_src_fck", &traceclk_src_fck, CK_3XXX), - CLK(NULL, "traceclk_fck", &traceclk_fck, CK_3XXX), - CLK(NULL, "sr1_fck", &sr1_fck, CK_34XX | CK_36XX), - CLK(NULL, "sr2_fck", &sr2_fck, CK_34XX | CK_36XX), - CLK(NULL, "sr_l4_ick", &sr_l4_ick, CK_34XX | CK_36XX), - CLK(NULL, "secure_32k_fck", &secure_32k_fck, CK_3XXX), - CLK(NULL, "gpt12_fck", &gpt12_fck, CK_3XXX), - CLK(NULL, "wdt1_fck", &wdt1_fck, CK_3XXX), - CLK(NULL, "ipss_ick", &ipss_ick, CK_AM35XX), - CLK(NULL, "rmii_ck", &rmii_ck, CK_AM35XX), - CLK(NULL, "pclk_ck", &pclk_ck, CK_AM35XX), - CLK(NULL, "emac_ick", &emac_ick, CK_AM35XX), - CLK(NULL, "emac_fck", &emac_fck, CK_AM35XX), - CLK("davinci_emac.0", NULL, &emac_ick, CK_AM35XX), - CLK("davinci_mdio.0", NULL, &emac_fck, CK_AM35XX), - CLK("vpfe-capture", "master", &vpfe_ick, CK_AM35XX), - CLK("vpfe-capture", "slave", &vpfe_fck, CK_AM35XX), - CLK(NULL, "hsotgusb_ick", &hsotgusb_ick_am35xx, CK_AM35XX), - CLK(NULL, "hsotgusb_fck", &hsotgusb_fck_am35xx, CK_AM35XX), - CLK(NULL, "hecc_ck", &hecc_ck, CK_AM35XX), - CLK(NULL, "uart4_ick", &uart4_ick_am35xx, CK_AM35XX), - CLK(NULL, "timer_32k_ck", &omap_32k_fck, CK_3XXX), - CLK(NULL, "timer_sys_ck", &sys_ck, CK_3XXX), - CLK(NULL, "cpufreq_ck", &dpll1_ck, CK_3XXX), + CLK(NULL, "apb_pclk", &dummy_apb_pclk), + CLK(NULL, "omap_32k_fck", &omap_32k_fck), + CLK(NULL, "virt_12m_ck", &virt_12m_ck), + CLK(NULL, "virt_13m_ck", &virt_13m_ck), + CLK(NULL, "virt_19200000_ck", &virt_19200000_ck), + CLK(NULL, "virt_26000000_ck", &virt_26000000_ck), + CLK(NULL, "virt_38_4m_ck", &virt_38_4m_ck), + CLK(NULL, "osc_sys_ck", &osc_sys_ck), + CLK("twl", "fck", &osc_sys_ck), + CLK(NULL, "sys_ck", &sys_ck), + CLK(NULL, "omap_96m_alwon_fck", &omap_96m_alwon_fck), + CLK("etb", "emu_core_alwon_ck", &emu_core_alwon_ck), + CLK(NULL, "sys_altclk", &sys_altclk), + CLK(NULL, "mcbsp_clks", &mcbsp_clks), + CLK(NULL, "sys_clkout1", &sys_clkout1), + CLK(NULL, "dpll1_ck", &dpll1_ck), + CLK(NULL, "dpll1_x2_ck", &dpll1_x2_ck), + CLK(NULL, "dpll1_x2m2_ck", &dpll1_x2m2_ck), + CLK(NULL, "dpll3_ck", &dpll3_ck), + CLK(NULL, "core_ck", &core_ck), + CLK(NULL, "dpll3_x2_ck", &dpll3_x2_ck), + CLK(NULL, "dpll3_m2_ck", &dpll3_m2_ck), + CLK(NULL, "dpll3_m2x2_ck", &dpll3_m2x2_ck), + CLK(NULL, "dpll3_m3_ck", &dpll3_m3_ck), + CLK(NULL, "dpll3_m3x2_ck", &dpll3_m3x2_ck), + CLK(NULL, "dpll4_ck", &dpll4_ck), + CLK(NULL, "dpll4_x2_ck", &dpll4_x2_ck), + CLK(NULL, "omap_96m_fck", &omap_96m_fck), + CLK(NULL, "cm_96m_fck", &cm_96m_fck), + CLK(NULL, "omap_54m_fck", &omap_54m_fck), + CLK(NULL, "omap_48m_fck", &omap_48m_fck), + CLK(NULL, "omap_12m_fck", &omap_12m_fck), + CLK(NULL, "dpll4_m2_ck", &dpll4_m2_ck), + CLK(NULL, "dpll4_m2x2_ck", &dpll4_m2x2_ck), + CLK(NULL, "dpll4_m3_ck", &dpll4_m3_ck), + CLK(NULL, "dpll4_m3x2_ck", &dpll4_m3x2_ck), + CLK(NULL, "dpll4_m4_ck", &dpll4_m4_ck), + CLK(NULL, "dpll4_m4x2_ck", &dpll4_m4x2_ck), + CLK(NULL, "dpll4_m5_ck", &dpll4_m5_ck), + CLK(NULL, "dpll4_m5x2_ck", &dpll4_m5x2_ck), + CLK(NULL, "dpll4_m6_ck", &dpll4_m6_ck), + CLK(NULL, "dpll4_m6x2_ck", &dpll4_m6x2_ck), + CLK("etb", "emu_per_alwon_ck", &emu_per_alwon_ck), + CLK(NULL, "clkout2_src_ck", &clkout2_src_ck), + CLK(NULL, "sys_clkout2", &sys_clkout2), + CLK(NULL, "corex2_fck", &corex2_fck), + CLK(NULL, "dpll1_fck", &dpll1_fck), + CLK(NULL, "mpu_ck", &mpu_ck), + CLK(NULL, "arm_fck", &arm_fck), + CLK("etb", "emu_mpu_alwon_ck", &emu_mpu_alwon_ck), + CLK(NULL, "l3_ick", &l3_ick), + CLK(NULL, "l4_ick", &l4_ick), + CLK(NULL, "rm_ick", &rm_ick), + CLK(NULL, "gpt10_fck", &gpt10_fck), + CLK(NULL, "gpt11_fck", &gpt11_fck), + CLK(NULL, "core_96m_fck", &core_96m_fck), + CLK(NULL, "mmchs2_fck", &mmchs2_fck), + CLK(NULL, "mmchs1_fck", &mmchs1_fck), + CLK(NULL, "i2c3_fck", &i2c3_fck), + CLK(NULL, "i2c2_fck", &i2c2_fck), + CLK(NULL, "i2c1_fck", &i2c1_fck), + CLK(NULL, "mcbsp5_fck", &mcbsp5_fck), + CLK(NULL, "mcbsp1_fck", &mcbsp1_fck), + CLK(NULL, "core_48m_fck", &core_48m_fck), + CLK(NULL, "mcspi4_fck", &mcspi4_fck), + CLK(NULL, "mcspi3_fck", &mcspi3_fck), + CLK(NULL, "mcspi2_fck", &mcspi2_fck), + CLK(NULL, "mcspi1_fck", &mcspi1_fck), + CLK(NULL, "uart2_fck", &uart2_fck), + CLK(NULL, "uart1_fck", &uart1_fck), + CLK(NULL, "core_12m_fck", &core_12m_fck), + CLK("omap_hdq.0", "fck", &hdq_fck), + CLK(NULL, "hdq_fck", &hdq_fck), + CLK(NULL, "core_l3_ick", &core_l3_ick), + CLK(NULL, "sdrc_ick", &sdrc_ick), + CLK(NULL, "gpmc_fck", &gpmc_fck), + CLK(NULL, "core_l4_ick", &core_l4_ick), + CLK("omap_hsmmc.1", "ick", &mmchs2_ick), + CLK("omap_hsmmc.0", "ick", &mmchs1_ick), + CLK(NULL, "mmchs2_ick", &mmchs2_ick), + CLK(NULL, "mmchs1_ick", &mmchs1_ick), + CLK("omap_hdq.0", "ick", &hdq_ick), + CLK(NULL, "hdq_ick", &hdq_ick), + CLK("omap2_mcspi.4", "ick", &mcspi4_ick), + CLK("omap2_mcspi.3", "ick", &mcspi3_ick), + CLK("omap2_mcspi.2", "ick", &mcspi2_ick), + CLK("omap2_mcspi.1", "ick", &mcspi1_ick), + CLK(NULL, "mcspi4_ick", &mcspi4_ick), + CLK(NULL, "mcspi3_ick", &mcspi3_ick), + CLK(NULL, "mcspi2_ick", &mcspi2_ick), + CLK(NULL, "mcspi1_ick", &mcspi1_ick), + CLK("omap_i2c.3", "ick", &i2c3_ick), + CLK("omap_i2c.2", "ick", &i2c2_ick), + CLK("omap_i2c.1", "ick", &i2c1_ick), + CLK(NULL, "i2c3_ick", &i2c3_ick), + CLK(NULL, "i2c2_ick", &i2c2_ick), + CLK(NULL, "i2c1_ick", &i2c1_ick), + CLK(NULL, "uart2_ick", &uart2_ick), + CLK(NULL, "uart1_ick", &uart1_ick), + CLK(NULL, "gpt11_ick", &gpt11_ick), + CLK(NULL, "gpt10_ick", &gpt10_ick), + CLK("omap-mcbsp.5", "ick", &mcbsp5_ick), + CLK("omap-mcbsp.1", "ick", &mcbsp1_ick), + CLK(NULL, "mcbsp5_ick", &mcbsp5_ick), + CLK(NULL, "mcbsp1_ick", &mcbsp1_ick), + CLK(NULL, "omapctrl_ick", &omapctrl_ick), + CLK(NULL, "dss_tv_fck", &dss_tv_fck), + CLK(NULL, "dss_96m_fck", &dss_96m_fck), + CLK(NULL, "dss2_alwon_fck", &dss2_alwon_fck), + CLK(NULL, "utmi_p1_gfclk", &dummy_ck), + CLK(NULL, "utmi_p2_gfclk", &dummy_ck), + CLK(NULL, "xclk60mhsp1_ck", &dummy_ck), + CLK(NULL, "xclk60mhsp2_ck", &dummy_ck), + CLK(NULL, "usb_host_hs_utmi_p1_clk", &dummy_ck), + CLK(NULL, "usb_host_hs_utmi_p2_clk", &dummy_ck), + CLK("usbhs_omap", "usb_tll_hs_usb_ch0_clk", &dummy_ck), + CLK("usbhs_omap", "usb_tll_hs_usb_ch1_clk", &dummy_ck), + CLK("usbhs_tll", "usb_tll_hs_usb_ch0_clk", &dummy_ck), + CLK("usbhs_tll", "usb_tll_hs_usb_ch1_clk", &dummy_ck), + CLK(NULL, "init_60m_fclk", &dummy_ck), + CLK(NULL, "gpt1_fck", &gpt1_fck), + CLK(NULL, "aes2_ick", &aes2_ick), + CLK(NULL, "wkup_32k_fck", &wkup_32k_fck), + CLK(NULL, "gpio1_dbck", &gpio1_dbck), + CLK(NULL, "sha12_ick", &sha12_ick), + CLK(NULL, "wdt2_fck", &wdt2_fck), + CLK("omap_wdt", "ick", &wdt2_ick), + CLK(NULL, "wdt2_ick", &wdt2_ick), + CLK(NULL, "wdt1_ick", &wdt1_ick), + CLK(NULL, "gpio1_ick", &gpio1_ick), + CLK(NULL, "omap_32ksync_ick", &omap_32ksync_ick), + CLK(NULL, "gpt12_ick", &gpt12_ick), + CLK(NULL, "gpt1_ick", &gpt1_ick), + CLK(NULL, "per_96m_fck", &per_96m_fck), + CLK(NULL, "per_48m_fck", &per_48m_fck), + CLK(NULL, "uart3_fck", &uart3_fck), + CLK(NULL, "gpt2_fck", &gpt2_fck), + CLK(NULL, "gpt3_fck", &gpt3_fck), + CLK(NULL, "gpt4_fck", &gpt4_fck), + CLK(NULL, "gpt5_fck", &gpt5_fck), + CLK(NULL, "gpt6_fck", &gpt6_fck), + CLK(NULL, "gpt7_fck", &gpt7_fck), + CLK(NULL, "gpt8_fck", &gpt8_fck), + CLK(NULL, "gpt9_fck", &gpt9_fck), + CLK(NULL, "per_32k_alwon_fck", &per_32k_alwon_fck), + CLK(NULL, "gpio6_dbck", &gpio6_dbck), + CLK(NULL, "gpio5_dbck", &gpio5_dbck), + CLK(NULL, "gpio4_dbck", &gpio4_dbck), + CLK(NULL, "gpio3_dbck", &gpio3_dbck), + CLK(NULL, "gpio2_dbck", &gpio2_dbck), + CLK(NULL, "wdt3_fck", &wdt3_fck), + CLK(NULL, "per_l4_ick", &per_l4_ick), + CLK(NULL, "gpio6_ick", &gpio6_ick), + CLK(NULL, "gpio5_ick", &gpio5_ick), + CLK(NULL, "gpio4_ick", &gpio4_ick), + CLK(NULL, "gpio3_ick", &gpio3_ick), + CLK(NULL, "gpio2_ick", &gpio2_ick), + CLK(NULL, "wdt3_ick", &wdt3_ick), + CLK(NULL, "uart3_ick", &uart3_ick), + CLK(NULL, "uart4_ick", &uart4_ick), + CLK(NULL, "gpt9_ick", &gpt9_ick), + CLK(NULL, "gpt8_ick", &gpt8_ick), + CLK(NULL, "gpt7_ick", &gpt7_ick), + CLK(NULL, "gpt6_ick", &gpt6_ick), + CLK(NULL, "gpt5_ick", &gpt5_ick), + CLK(NULL, "gpt4_ick", &gpt4_ick), + CLK(NULL, "gpt3_ick", &gpt3_ick), + CLK(NULL, "gpt2_ick", &gpt2_ick), + CLK("omap-mcbsp.2", "ick", &mcbsp2_ick), + CLK("omap-mcbsp.3", "ick", &mcbsp3_ick), + CLK("omap-mcbsp.4", "ick", &mcbsp4_ick), + CLK(NULL, "mcbsp4_ick", &mcbsp2_ick), + CLK(NULL, "mcbsp3_ick", &mcbsp3_ick), + CLK(NULL, "mcbsp2_ick", &mcbsp4_ick), + CLK(NULL, "mcbsp2_fck", &mcbsp2_fck), + CLK(NULL, "mcbsp3_fck", &mcbsp3_fck), + CLK(NULL, "mcbsp4_fck", &mcbsp4_fck), + CLK("etb", "emu_src_ck", &emu_src_ck), + CLK(NULL, "emu_src_ck", &emu_src_ck), + CLK(NULL, "pclk_fck", &pclk_fck), + CLK(NULL, "pclkx2_fck", &pclkx2_fck), + CLK(NULL, "atclk_fck", &atclk_fck), + CLK(NULL, "traceclk_src_fck", &traceclk_src_fck), + CLK(NULL, "traceclk_fck", &traceclk_fck), + CLK(NULL, "secure_32k_fck", &secure_32k_fck), + CLK(NULL, "gpt12_fck", &gpt12_fck), + CLK(NULL, "wdt1_fck", &wdt1_fck), + CLK(NULL, "timer_32k_ck", &omap_32k_fck), + CLK(NULL, "timer_sys_ck", &sys_ck), + CLK(NULL, "cpufreq_ck", &dpll1_ck), }; static const char *enable_init_clks[] = { @@ -3512,8 +3550,27 @@ static const char *enable_init_clks[] = { int __init omap3xxx_clk_init(void) { - struct omap_clk *c; - u32 cpu_clkflg = 0; + if (omap3_has_192mhz_clk()) + omap_96m_alwon_fck = omap_96m_alwon_fck_3630; + + if (cpu_is_omap3630()) { + dpll3_m3x2_ck = dpll3_m3x2_ck_3630; + dpll4_m2x2_ck = dpll4_m2x2_ck_3630; + dpll4_m3x2_ck = dpll4_m3x2_ck_3630; + dpll4_m4x2_ck = dpll4_m4x2_ck_3630; + dpll4_m5x2_ck = dpll4_m5x2_ck_3630; + dpll4_m6x2_ck = dpll4_m6x2_ck_3630; + } + + /* + * XXX This type of dynamic rewriting of the clock tree is + * deprecated and should be revised soon. + */ + if (cpu_is_omap3630()) + dpll4_dd = dpll4_dd_3630; + else + dpll4_dd = dpll4_dd_34xx; + /* * 3505 must be tested before 3517, since 3517 returns true @@ -3523,13 +3580,20 @@ int __init omap3xxx_clk_init(void) */ if (soc_is_am35xx()) { cpu_mask = RATE_IN_34XX; - cpu_clkflg = CK_AM35XX; + omap_clocks_register(am35xx_clks, ARRAY_SIZE(am35xx_clks)); + omap_clocks_register(omap36xx_am35xx_omap3430es2plus_clks, + ARRAY_SIZE(omap36xx_am35xx_omap3430es2plus_clks)); + omap_clocks_register(omap3xxx_clks, ARRAY_SIZE(omap3xxx_clks)); } else if (cpu_is_omap3630()) { cpu_mask = (RATE_IN_34XX | RATE_IN_36XX); - cpu_clkflg = CK_36XX; - } else if (cpu_is_ti816x()) { - cpu_mask = RATE_IN_TI816X; - cpu_clkflg = CK_TI816X; + omap_clocks_register(omap36xx_clks, ARRAY_SIZE(omap36xx_clks)); + omap_clocks_register(omap36xx_omap3430es2plus_clks, + ARRAY_SIZE(omap36xx_omap3430es2plus_clks)); + omap_clocks_register(omap34xx_omap36xx_clks, + ARRAY_SIZE(omap34xx_omap36xx_clks)); + omap_clocks_register(omap36xx_am35xx_omap3430es2plus_clks, + ARRAY_SIZE(omap36xx_am35xx_omap3430es2plus_clks)); + omap_clocks_register(omap3xxx_clks, ARRAY_SIZE(omap3xxx_clks)); } else if (soc_is_am33xx()) { cpu_mask = RATE_IN_AM33XX; } else if (cpu_is_ti814x()) { @@ -3537,49 +3601,32 @@ int __init omap3xxx_clk_init(void) } else if (cpu_is_omap34xx()) { if (omap_rev() == OMAP3430_REV_ES1_0) { cpu_mask = RATE_IN_3430ES1; - cpu_clkflg = CK_3430ES1; + omap_clocks_register(omap3430es1_clks, + ARRAY_SIZE(omap3430es1_clks)); + omap_clocks_register(omap34xx_omap36xx_clks, + ARRAY_SIZE(omap34xx_omap36xx_clks)); + omap_clocks_register(omap3xxx_clks, + ARRAY_SIZE(omap3xxx_clks)); } else { /* * Assume that anything that we haven't matched yet * has 3430ES2-type clocks. */ cpu_mask = RATE_IN_3430ES2PLUS; - cpu_clkflg = CK_3430ES2PLUS; + omap_clocks_register(omap34xx_omap36xx_clks, + ARRAY_SIZE(omap34xx_omap36xx_clks)); + omap_clocks_register(omap36xx_omap3430es2plus_clks, + ARRAY_SIZE(omap36xx_omap3430es2plus_clks)); + omap_clocks_register(omap36xx_am35xx_omap3430es2plus_clks, + ARRAY_SIZE(omap36xx_am35xx_omap3430es2plus_clks)); + omap_clocks_register(omap3xxx_clks, + ARRAY_SIZE(omap3xxx_clks)); } } else { WARN(1, "clock: could not identify OMAP3 variant\n"); } - if (omap3_has_192mhz_clk()) - omap_96m_alwon_fck = omap_96m_alwon_fck_3630; - - if (cpu_is_omap3630()) { - dpll3_m3x2_ck = dpll3_m3x2_ck_3630; - dpll4_m2x2_ck = dpll4_m2x2_ck_3630; - dpll4_m3x2_ck = dpll4_m3x2_ck_3630; - dpll4_m4x2_ck = dpll4_m4x2_ck_3630; - dpll4_m5x2_ck = dpll4_m5x2_ck_3630; - dpll4_m6x2_ck = dpll4_m6x2_ck_3630; - } - - /* - * XXX This type of dynamic rewriting of the clock tree is - * deprecated and should be revised soon. - */ - if (cpu_is_omap3630()) - dpll4_dd = dpll4_dd_3630; - else - dpll4_dd = dpll4_dd_34xx; - - for (c = omap3xxx_clks; c < omap3xxx_clks + ARRAY_SIZE(omap3xxx_clks); - c++) - if (c->cpu & cpu_clkflg) { - clkdev_add(&c->lk); - if (!__clk_init(NULL, c->lk.clk)) - omap2_init_clk_hw_omap_clocks(c->lk.clk); - } - - omap2_clk_disable_autoidle_all(); + omap2_clk_disable_autoidle_all(); omap2_clk_enable_init_clocks(enable_init_clks, ARRAY_SIZE(enable_init_clks)); diff --git a/arch/arm/mach-omap2/cclock44xx_data.c b/arch/arm/mach-omap2/cclock44xx_data.c index 0c6834ae1fc4..88e37a474334 100644 --- a/arch/arm/mach-omap2/cclock44xx_data.c +++ b/arch/arm/mach-omap2/cclock44xx_data.c @@ -1424,284 +1424,285 @@ DEFINE_CLK_MUX(auxclkreq5_ck, auxclkreq_ck_parents, NULL, 0x0, 0x0, NULL); /* - * clkdev + * clocks specific to omap4460 */ +static struct omap_clk omap446x_clks[] = { + CLK(NULL, "div_ts_ck", &div_ts_ck), + CLK(NULL, "bandgap_ts_fclk", &bandgap_ts_fclk), +}; + +/* + * clocks specific to omap4430 + */ +static struct omap_clk omap443x_clks[] = { + CLK(NULL, "bandgap_fclk", &bandgap_fclk), +}; +/* + * clocks common to omap44xx + */ static struct omap_clk omap44xx_clks[] = { - CLK(NULL, "extalt_clkin_ck", &extalt_clkin_ck, CK_443X), - CLK(NULL, "pad_clks_src_ck", &pad_clks_src_ck, CK_443X), - CLK(NULL, "pad_clks_ck", &pad_clks_ck, CK_443X), - CLK(NULL, "pad_slimbus_core_clks_ck", &pad_slimbus_core_clks_ck, CK_443X), - CLK(NULL, "secure_32k_clk_src_ck", &secure_32k_clk_src_ck, CK_443X), - CLK(NULL, "slimbus_src_clk", &slimbus_src_clk, CK_443X), - CLK(NULL, "slimbus_clk", &slimbus_clk, CK_443X), - CLK(NULL, "sys_32k_ck", &sys_32k_ck, CK_443X), - CLK(NULL, "virt_12000000_ck", &virt_12000000_ck, CK_443X), - CLK(NULL, "virt_13000000_ck", &virt_13000000_ck, CK_443X), - CLK(NULL, "virt_16800000_ck", &virt_16800000_ck, CK_443X), - CLK(NULL, "virt_19200000_ck", &virt_19200000_ck, CK_443X), - CLK(NULL, "virt_26000000_ck", &virt_26000000_ck, CK_443X), - CLK(NULL, "virt_27000000_ck", &virt_27000000_ck, CK_443X), - CLK(NULL, "virt_38400000_ck", &virt_38400000_ck, CK_443X), - CLK(NULL, "sys_clkin_ck", &sys_clkin_ck, CK_443X), - CLK(NULL, "tie_low_clock_ck", &tie_low_clock_ck, CK_443X), - CLK(NULL, "utmi_phy_clkout_ck", &utmi_phy_clkout_ck, CK_443X), - CLK(NULL, "xclk60mhsp1_ck", &xclk60mhsp1_ck, CK_443X), - CLK(NULL, "xclk60mhsp2_ck", &xclk60mhsp2_ck, CK_443X), - CLK(NULL, "xclk60motg_ck", &xclk60motg_ck, CK_443X), - CLK(NULL, "abe_dpll_bypass_clk_mux_ck", &abe_dpll_bypass_clk_mux_ck, CK_443X), - CLK(NULL, "abe_dpll_refclk_mux_ck", &abe_dpll_refclk_mux_ck, CK_443X), - CLK(NULL, "dpll_abe_ck", &dpll_abe_ck, CK_443X), - CLK(NULL, "dpll_abe_x2_ck", &dpll_abe_x2_ck, CK_443X), - CLK(NULL, "dpll_abe_m2x2_ck", &dpll_abe_m2x2_ck, CK_443X), - CLK(NULL, "abe_24m_fclk", &abe_24m_fclk, CK_443X), - CLK(NULL, "abe_clk", &abe_clk, CK_443X), - CLK(NULL, "aess_fclk", &aess_fclk, CK_443X), - CLK(NULL, "dpll_abe_m3x2_ck", &dpll_abe_m3x2_ck, CK_443X), - CLK(NULL, "core_hsd_byp_clk_mux_ck", &core_hsd_byp_clk_mux_ck, CK_443X), - CLK(NULL, "dpll_core_ck", &dpll_core_ck, CK_443X), - CLK(NULL, "dpll_core_x2_ck", &dpll_core_x2_ck, CK_443X), - CLK(NULL, "dpll_core_m6x2_ck", &dpll_core_m6x2_ck, CK_443X), - CLK(NULL, "dbgclk_mux_ck", &dbgclk_mux_ck, CK_443X), - CLK(NULL, "dpll_core_m2_ck", &dpll_core_m2_ck, CK_443X), - CLK(NULL, "ddrphy_ck", &ddrphy_ck, CK_443X), - CLK(NULL, "dpll_core_m5x2_ck", &dpll_core_m5x2_ck, CK_443X), - CLK(NULL, "div_core_ck", &div_core_ck, CK_443X), - CLK(NULL, "div_iva_hs_clk", &div_iva_hs_clk, CK_443X), - CLK(NULL, "div_mpu_hs_clk", &div_mpu_hs_clk, CK_443X), - CLK(NULL, "dpll_core_m4x2_ck", &dpll_core_m4x2_ck, CK_443X), - CLK(NULL, "dll_clk_div_ck", &dll_clk_div_ck, CK_443X), - CLK(NULL, "dpll_abe_m2_ck", &dpll_abe_m2_ck, CK_443X), - CLK(NULL, "dpll_core_m3x2_ck", &dpll_core_m3x2_ck, CK_443X), - CLK(NULL, "dpll_core_m7x2_ck", &dpll_core_m7x2_ck, CK_443X), - CLK(NULL, "iva_hsd_byp_clk_mux_ck", &iva_hsd_byp_clk_mux_ck, CK_443X), - CLK(NULL, "dpll_iva_ck", &dpll_iva_ck, CK_443X), - CLK(NULL, "dpll_iva_x2_ck", &dpll_iva_x2_ck, CK_443X), - CLK(NULL, "dpll_iva_m4x2_ck", &dpll_iva_m4x2_ck, CK_443X), - CLK(NULL, "dpll_iva_m5x2_ck", &dpll_iva_m5x2_ck, CK_443X), - CLK(NULL, "dpll_mpu_ck", &dpll_mpu_ck, CK_443X), - CLK(NULL, "dpll_mpu_m2_ck", &dpll_mpu_m2_ck, CK_443X), - CLK(NULL, "per_hs_clk_div_ck", &per_hs_clk_div_ck, CK_443X), - CLK(NULL, "per_hsd_byp_clk_mux_ck", &per_hsd_byp_clk_mux_ck, CK_443X), - CLK(NULL, "dpll_per_ck", &dpll_per_ck, CK_443X), - CLK(NULL, "dpll_per_m2_ck", &dpll_per_m2_ck, CK_443X), - CLK(NULL, "dpll_per_x2_ck", &dpll_per_x2_ck, CK_443X), - CLK(NULL, "dpll_per_m2x2_ck", &dpll_per_m2x2_ck, CK_443X), - CLK(NULL, "dpll_per_m3x2_ck", &dpll_per_m3x2_ck, CK_443X), - CLK(NULL, "dpll_per_m4x2_ck", &dpll_per_m4x2_ck, CK_443X), - CLK(NULL, "dpll_per_m5x2_ck", &dpll_per_m5x2_ck, CK_443X), - CLK(NULL, "dpll_per_m6x2_ck", &dpll_per_m6x2_ck, CK_443X), - CLK(NULL, "dpll_per_m7x2_ck", &dpll_per_m7x2_ck, CK_443X), - CLK(NULL, "usb_hs_clk_div_ck", &usb_hs_clk_div_ck, CK_443X), - CLK(NULL, "dpll_usb_ck", &dpll_usb_ck, CK_443X), - CLK(NULL, "dpll_usb_clkdcoldo_ck", &dpll_usb_clkdcoldo_ck, CK_443X), - CLK(NULL, "dpll_usb_m2_ck", &dpll_usb_m2_ck, CK_443X), - CLK(NULL, "ducati_clk_mux_ck", &ducati_clk_mux_ck, CK_443X), - CLK(NULL, "func_12m_fclk", &func_12m_fclk, CK_443X), - CLK(NULL, "func_24m_clk", &func_24m_clk, CK_443X), - CLK(NULL, "func_24mc_fclk", &func_24mc_fclk, CK_443X), - CLK(NULL, "func_48m_fclk", &func_48m_fclk, CK_443X), - CLK(NULL, "func_48mc_fclk", &func_48mc_fclk, CK_443X), - CLK(NULL, "func_64m_fclk", &func_64m_fclk, CK_443X), - CLK(NULL, "func_96m_fclk", &func_96m_fclk, CK_443X), - CLK(NULL, "init_60m_fclk", &init_60m_fclk, CK_443X), - CLK(NULL, "l3_div_ck", &l3_div_ck, CK_443X), - CLK(NULL, "l4_div_ck", &l4_div_ck, CK_443X), - CLK(NULL, "lp_clk_div_ck", &lp_clk_div_ck, CK_443X), - CLK(NULL, "l4_wkup_clk_mux_ck", &l4_wkup_clk_mux_ck, CK_443X), - CLK("smp_twd", NULL, &mpu_periphclk, CK_443X), - CLK(NULL, "ocp_abe_iclk", &ocp_abe_iclk, CK_443X), - CLK(NULL, "per_abe_24m_fclk", &per_abe_24m_fclk, CK_443X), - CLK(NULL, "per_abe_nc_fclk", &per_abe_nc_fclk, CK_443X), - CLK(NULL, "syc_clk_div_ck", &syc_clk_div_ck, CK_443X), - CLK(NULL, "aes1_fck", &aes1_fck, CK_443X), - CLK(NULL, "aes2_fck", &aes2_fck, CK_443X), - CLK(NULL, "bandgap_fclk", &bandgap_fclk, CK_443X), - CLK(NULL, "div_ts_ck", &div_ts_ck, CK_446X), - CLK(NULL, "bandgap_ts_fclk", &bandgap_ts_fclk, CK_446X), - CLK(NULL, "dmic_sync_mux_ck", &dmic_sync_mux_ck, CK_443X), - CLK(NULL, "func_dmic_abe_gfclk", &func_dmic_abe_gfclk, CK_443X), - CLK(NULL, "dss_sys_clk", &dss_sys_clk, CK_443X), - CLK(NULL, "dss_tv_clk", &dss_tv_clk, CK_443X), - CLK(NULL, "dss_dss_clk", &dss_dss_clk, CK_443X), - CLK(NULL, "dss_48mhz_clk", &dss_48mhz_clk, CK_443X), - CLK(NULL, "dss_fck", &dss_fck, CK_443X), - CLK("omapdss_dss", "ick", &dss_fck, CK_443X), - CLK(NULL, "fdif_fck", &fdif_fck, CK_443X), - CLK(NULL, "gpio1_dbclk", &gpio1_dbclk, CK_443X), - CLK(NULL, "gpio2_dbclk", &gpio2_dbclk, CK_443X), - CLK(NULL, "gpio3_dbclk", &gpio3_dbclk, CK_443X), - CLK(NULL, "gpio4_dbclk", &gpio4_dbclk, CK_443X), - CLK(NULL, "gpio5_dbclk", &gpio5_dbclk, CK_443X), - CLK(NULL, "gpio6_dbclk", &gpio6_dbclk, CK_443X), - CLK(NULL, "sgx_clk_mux", &sgx_clk_mux, CK_443X), - CLK(NULL, "hsi_fck", &hsi_fck, CK_443X), - CLK(NULL, "iss_ctrlclk", &iss_ctrlclk, CK_443X), - CLK(NULL, "mcasp_sync_mux_ck", &mcasp_sync_mux_ck, CK_443X), - CLK(NULL, "func_mcasp_abe_gfclk", &func_mcasp_abe_gfclk, CK_443X), - CLK(NULL, "mcbsp1_sync_mux_ck", &mcbsp1_sync_mux_ck, CK_443X), - CLK(NULL, "func_mcbsp1_gfclk", &func_mcbsp1_gfclk, CK_443X), - CLK(NULL, "mcbsp2_sync_mux_ck", &mcbsp2_sync_mux_ck, CK_443X), - CLK(NULL, "func_mcbsp2_gfclk", &func_mcbsp2_gfclk, CK_443X), - CLK(NULL, "mcbsp3_sync_mux_ck", &mcbsp3_sync_mux_ck, CK_443X), - CLK(NULL, "func_mcbsp3_gfclk", &func_mcbsp3_gfclk, CK_443X), - CLK(NULL, "mcbsp4_sync_mux_ck", &mcbsp4_sync_mux_ck, CK_443X), - CLK(NULL, "per_mcbsp4_gfclk", &per_mcbsp4_gfclk, CK_443X), - CLK(NULL, "hsmmc1_fclk", &hsmmc1_fclk, CK_443X), - CLK(NULL, "hsmmc2_fclk", &hsmmc2_fclk, CK_443X), - CLK(NULL, "ocp2scp_usb_phy_phy_48m", &ocp2scp_usb_phy_phy_48m, CK_443X), - CLK(NULL, "sha2md5_fck", &sha2md5_fck, CK_443X), - CLK(NULL, "slimbus1_fclk_1", &slimbus1_fclk_1, CK_443X), - CLK(NULL, "slimbus1_fclk_0", &slimbus1_fclk_0, CK_443X), - CLK(NULL, "slimbus1_fclk_2", &slimbus1_fclk_2, CK_443X), - CLK(NULL, "slimbus1_slimbus_clk", &slimbus1_slimbus_clk, CK_443X), - CLK(NULL, "slimbus2_fclk_1", &slimbus2_fclk_1, CK_443X), - CLK(NULL, "slimbus2_fclk_0", &slimbus2_fclk_0, CK_443X), - CLK(NULL, "slimbus2_slimbus_clk", &slimbus2_slimbus_clk, CK_443X), - CLK(NULL, "smartreflex_core_fck", &smartreflex_core_fck, CK_443X), - CLK(NULL, "smartreflex_iva_fck", &smartreflex_iva_fck, CK_443X), - CLK(NULL, "smartreflex_mpu_fck", &smartreflex_mpu_fck, CK_443X), - CLK(NULL, "dmt1_clk_mux", &dmt1_clk_mux, CK_443X), - CLK(NULL, "cm2_dm10_mux", &cm2_dm10_mux, CK_443X), - CLK(NULL, "cm2_dm11_mux", &cm2_dm11_mux, CK_443X), - CLK(NULL, "cm2_dm2_mux", &cm2_dm2_mux, CK_443X), - CLK(NULL, "cm2_dm3_mux", &cm2_dm3_mux, CK_443X), - CLK(NULL, "cm2_dm4_mux", &cm2_dm4_mux, CK_443X), - CLK(NULL, "timer5_sync_mux", &timer5_sync_mux, CK_443X), - CLK(NULL, "timer6_sync_mux", &timer6_sync_mux, CK_443X), - CLK(NULL, "timer7_sync_mux", &timer7_sync_mux, CK_443X), - CLK(NULL, "timer8_sync_mux", &timer8_sync_mux, CK_443X), - CLK(NULL, "cm2_dm9_mux", &cm2_dm9_mux, CK_443X), - CLK(NULL, "usb_host_fs_fck", &usb_host_fs_fck, CK_443X), - CLK("usbhs_omap", "fs_fck", &usb_host_fs_fck, CK_443X), - CLK(NULL, "utmi_p1_gfclk", &utmi_p1_gfclk, CK_443X), - CLK(NULL, "usb_host_hs_utmi_p1_clk", &usb_host_hs_utmi_p1_clk, CK_443X), - CLK(NULL, "utmi_p2_gfclk", &utmi_p2_gfclk, CK_443X), - CLK(NULL, "usb_host_hs_utmi_p2_clk", &usb_host_hs_utmi_p2_clk, CK_443X), - CLK(NULL, "usb_host_hs_utmi_p3_clk", &usb_host_hs_utmi_p3_clk, CK_443X), - CLK(NULL, "usb_host_hs_hsic480m_p1_clk", &usb_host_hs_hsic480m_p1_clk, CK_443X), - CLK(NULL, "usb_host_hs_hsic60m_p1_clk", &usb_host_hs_hsic60m_p1_clk, CK_443X), - CLK(NULL, "usb_host_hs_hsic60m_p2_clk", &usb_host_hs_hsic60m_p2_clk, CK_443X), - CLK(NULL, "usb_host_hs_hsic480m_p2_clk", &usb_host_hs_hsic480m_p2_clk, CK_443X), - CLK(NULL, "usb_host_hs_func48mclk", &usb_host_hs_func48mclk, CK_443X), - CLK(NULL, "usb_host_hs_fck", &usb_host_hs_fck, CK_443X), - CLK("usbhs_omap", "hs_fck", &usb_host_hs_fck, CK_443X), - CLK(NULL, "otg_60m_gfclk", &otg_60m_gfclk, CK_443X), - CLK(NULL, "usb_otg_hs_xclk", &usb_otg_hs_xclk, CK_443X), - CLK(NULL, "usb_otg_hs_ick", &usb_otg_hs_ick, CK_443X), - CLK("musb-omap2430", "ick", &usb_otg_hs_ick, CK_443X), - CLK(NULL, "usb_phy_cm_clk32k", &usb_phy_cm_clk32k, CK_443X), - CLK(NULL, "usb_tll_hs_usb_ch2_clk", &usb_tll_hs_usb_ch2_clk, CK_443X), - CLK(NULL, "usb_tll_hs_usb_ch0_clk", &usb_tll_hs_usb_ch0_clk, CK_443X), - CLK(NULL, "usb_tll_hs_usb_ch1_clk", &usb_tll_hs_usb_ch1_clk, CK_443X), - CLK(NULL, "usb_tll_hs_ick", &usb_tll_hs_ick, CK_443X), - CLK("usbhs_omap", "usbtll_ick", &usb_tll_hs_ick, CK_443X), - CLK("usbhs_tll", "usbtll_ick", &usb_tll_hs_ick, CK_443X), - CLK(NULL, "usim_ck", &usim_ck, CK_443X), - CLK(NULL, "usim_fclk", &usim_fclk, CK_443X), - CLK(NULL, "pmd_stm_clock_mux_ck", &pmd_stm_clock_mux_ck, CK_443X), - CLK(NULL, "pmd_trace_clk_mux_ck", &pmd_trace_clk_mux_ck, CK_443X), - CLK(NULL, "stm_clk_div_ck", &stm_clk_div_ck, CK_443X), - CLK(NULL, "trace_clk_div_ck", &trace_clk_div_ck, CK_443X), - CLK(NULL, "auxclk0_src_ck", &auxclk0_src_ck, CK_443X), - CLK(NULL, "auxclk0_ck", &auxclk0_ck, CK_443X), - CLK(NULL, "auxclkreq0_ck", &auxclkreq0_ck, CK_443X), - CLK(NULL, "auxclk1_src_ck", &auxclk1_src_ck, CK_443X), - CLK(NULL, "auxclk1_ck", &auxclk1_ck, CK_443X), - CLK(NULL, "auxclkreq1_ck", &auxclkreq1_ck, CK_443X), - CLK(NULL, "auxclk2_src_ck", &auxclk2_src_ck, CK_443X), - CLK(NULL, "auxclk2_ck", &auxclk2_ck, CK_443X), - CLK(NULL, "auxclkreq2_ck", &auxclkreq2_ck, CK_443X), - CLK(NULL, "auxclk3_src_ck", &auxclk3_src_ck, CK_443X), - CLK(NULL, "auxclk3_ck", &auxclk3_ck, CK_443X), - CLK(NULL, "auxclkreq3_ck", &auxclkreq3_ck, CK_443X), - CLK(NULL, "auxclk4_src_ck", &auxclk4_src_ck, CK_443X), - CLK(NULL, "auxclk4_ck", &auxclk4_ck, CK_443X), - CLK(NULL, "auxclkreq4_ck", &auxclkreq4_ck, CK_443X), - CLK(NULL, "auxclk5_src_ck", &auxclk5_src_ck, CK_443X), - CLK(NULL, "auxclk5_ck", &auxclk5_ck, CK_443X), - CLK(NULL, "auxclkreq5_ck", &auxclkreq5_ck, CK_443X), - CLK("omap-gpmc", "fck", &dummy_ck, CK_443X), - CLK("omap_i2c.1", "ick", &dummy_ck, CK_443X), - CLK("omap_i2c.2", "ick", &dummy_ck, CK_443X), - CLK("omap_i2c.3", "ick", &dummy_ck, CK_443X), - CLK("omap_i2c.4", "ick", &dummy_ck, CK_443X), - CLK(NULL, "mailboxes_ick", &dummy_ck, CK_443X), - CLK("omap_hsmmc.0", "ick", &dummy_ck, CK_443X), - CLK("omap_hsmmc.1", "ick", &dummy_ck, CK_443X), - CLK("omap_hsmmc.2", "ick", &dummy_ck, CK_443X), - CLK("omap_hsmmc.3", "ick", &dummy_ck, CK_443X), - CLK("omap_hsmmc.4", "ick", &dummy_ck, CK_443X), - CLK("omap-mcbsp.1", "ick", &dummy_ck, CK_443X), - CLK("omap-mcbsp.2", "ick", &dummy_ck, CK_443X), - CLK("omap-mcbsp.3", "ick", &dummy_ck, CK_443X), - CLK("omap-mcbsp.4", "ick", &dummy_ck, CK_443X), - CLK("omap2_mcspi.1", "ick", &dummy_ck, CK_443X), - CLK("omap2_mcspi.2", "ick", &dummy_ck, CK_443X), - CLK("omap2_mcspi.3", "ick", &dummy_ck, CK_443X), - CLK("omap2_mcspi.4", "ick", &dummy_ck, CK_443X), - CLK(NULL, "uart1_ick", &dummy_ck, CK_443X), - CLK(NULL, "uart2_ick", &dummy_ck, CK_443X), - CLK(NULL, "uart3_ick", &dummy_ck, CK_443X), - CLK(NULL, "uart4_ick", &dummy_ck, CK_443X), - CLK("usbhs_omap", "usbhost_ick", &dummy_ck, CK_443X), - CLK("usbhs_omap", "usbtll_fck", &dummy_ck, CK_443X), - CLK("usbhs_tll", "usbtll_fck", &dummy_ck, CK_443X), - CLK("omap_wdt", "ick", &dummy_ck, CK_443X), - CLK(NULL, "timer_32k_ck", &sys_32k_ck, CK_443X), + CLK(NULL, "extalt_clkin_ck", &extalt_clkin_ck), + CLK(NULL, "pad_clks_src_ck", &pad_clks_src_ck), + CLK(NULL, "pad_clks_ck", &pad_clks_ck), + CLK(NULL, "pad_slimbus_core_clks_ck", &pad_slimbus_core_clks_ck), + CLK(NULL, "secure_32k_clk_src_ck", &secure_32k_clk_src_ck), + CLK(NULL, "slimbus_src_clk", &slimbus_src_clk), + CLK(NULL, "slimbus_clk", &slimbus_clk), + CLK(NULL, "sys_32k_ck", &sys_32k_ck), + CLK(NULL, "virt_12000000_ck", &virt_12000000_ck), + CLK(NULL, "virt_13000000_ck", &virt_13000000_ck), + CLK(NULL, "virt_16800000_ck", &virt_16800000_ck), + CLK(NULL, "virt_19200000_ck", &virt_19200000_ck), + CLK(NULL, "virt_26000000_ck", &virt_26000000_ck), + CLK(NULL, "virt_27000000_ck", &virt_27000000_ck), + CLK(NULL, "virt_38400000_ck", &virt_38400000_ck), + CLK(NULL, "sys_clkin_ck", &sys_clkin_ck), + CLK(NULL, "tie_low_clock_ck", &tie_low_clock_ck), + CLK(NULL, "utmi_phy_clkout_ck", &utmi_phy_clkout_ck), + CLK(NULL, "xclk60mhsp1_ck", &xclk60mhsp1_ck), + CLK(NULL, "xclk60mhsp2_ck", &xclk60mhsp2_ck), + CLK(NULL, "xclk60motg_ck", &xclk60motg_ck), + CLK(NULL, "abe_dpll_bypass_clk_mux_ck", &abe_dpll_bypass_clk_mux_ck), + CLK(NULL, "abe_dpll_refclk_mux_ck", &abe_dpll_refclk_mux_ck), + CLK(NULL, "dpll_abe_ck", &dpll_abe_ck), + CLK(NULL, "dpll_abe_x2_ck", &dpll_abe_x2_ck), + CLK(NULL, "dpll_abe_m2x2_ck", &dpll_abe_m2x2_ck), + CLK(NULL, "abe_24m_fclk", &abe_24m_fclk), + CLK(NULL, "abe_clk", &abe_clk), + CLK(NULL, "aess_fclk", &aess_fclk), + CLK(NULL, "dpll_abe_m3x2_ck", &dpll_abe_m3x2_ck), + CLK(NULL, "core_hsd_byp_clk_mux_ck", &core_hsd_byp_clk_mux_ck), + CLK(NULL, "dpll_core_ck", &dpll_core_ck), + CLK(NULL, "dpll_core_x2_ck", &dpll_core_x2_ck), + CLK(NULL, "dpll_core_m6x2_ck", &dpll_core_m6x2_ck), + CLK(NULL, "dbgclk_mux_ck", &dbgclk_mux_ck), + CLK(NULL, "dpll_core_m2_ck", &dpll_core_m2_ck), + CLK(NULL, "ddrphy_ck", &ddrphy_ck), + CLK(NULL, "dpll_core_m5x2_ck", &dpll_core_m5x2_ck), + CLK(NULL, "div_core_ck", &div_core_ck), + CLK(NULL, "div_iva_hs_clk", &div_iva_hs_clk), + CLK(NULL, "div_mpu_hs_clk", &div_mpu_hs_clk), + CLK(NULL, "dpll_core_m4x2_ck", &dpll_core_m4x2_ck), + CLK(NULL, "dll_clk_div_ck", &dll_clk_div_ck), + CLK(NULL, "dpll_abe_m2_ck", &dpll_abe_m2_ck), + CLK(NULL, "dpll_core_m3x2_ck", &dpll_core_m3x2_ck), + CLK(NULL, "dpll_core_m7x2_ck", &dpll_core_m7x2_ck), + CLK(NULL, "iva_hsd_byp_clk_mux_ck", &iva_hsd_byp_clk_mux_ck), + CLK(NULL, "dpll_iva_ck", &dpll_iva_ck), + CLK(NULL, "dpll_iva_x2_ck", &dpll_iva_x2_ck), + CLK(NULL, "dpll_iva_m4x2_ck", &dpll_iva_m4x2_ck), + CLK(NULL, "dpll_iva_m5x2_ck", &dpll_iva_m5x2_ck), + CLK(NULL, "dpll_mpu_ck", &dpll_mpu_ck), + CLK(NULL, "dpll_mpu_m2_ck", &dpll_mpu_m2_ck), + CLK(NULL, "per_hs_clk_div_ck", &per_hs_clk_div_ck), + CLK(NULL, "per_hsd_byp_clk_mux_ck", &per_hsd_byp_clk_mux_ck), + CLK(NULL, "dpll_per_ck", &dpll_per_ck), + CLK(NULL, "dpll_per_m2_ck", &dpll_per_m2_ck), + CLK(NULL, "dpll_per_x2_ck", &dpll_per_x2_ck), + CLK(NULL, "dpll_per_m2x2_ck", &dpll_per_m2x2_ck), + CLK(NULL, "dpll_per_m3x2_ck", &dpll_per_m3x2_ck), + CLK(NULL, "dpll_per_m4x2_ck", &dpll_per_m4x2_ck), + CLK(NULL, "dpll_per_m5x2_ck", &dpll_per_m5x2_ck), + CLK(NULL, "dpll_per_m6x2_ck", &dpll_per_m6x2_ck), + CLK(NULL, "dpll_per_m7x2_ck", &dpll_per_m7x2_ck), + CLK(NULL, "usb_hs_clk_div_ck", &usb_hs_clk_div_ck), + CLK(NULL, "dpll_usb_ck", &dpll_usb_ck), + CLK(NULL, "dpll_usb_clkdcoldo_ck", &dpll_usb_clkdcoldo_ck), + CLK(NULL, "dpll_usb_m2_ck", &dpll_usb_m2_ck), + CLK(NULL, "ducati_clk_mux_ck", &ducati_clk_mux_ck), + CLK(NULL, "func_12m_fclk", &func_12m_fclk), + CLK(NULL, "func_24m_clk", &func_24m_clk), + CLK(NULL, "func_24mc_fclk", &func_24mc_fclk), + CLK(NULL, "func_48m_fclk", &func_48m_fclk), + CLK(NULL, "func_48mc_fclk", &func_48mc_fclk), + CLK(NULL, "func_64m_fclk", &func_64m_fclk), + CLK(NULL, "func_96m_fclk", &func_96m_fclk), + CLK(NULL, "init_60m_fclk", &init_60m_fclk), + CLK(NULL, "l3_div_ck", &l3_div_ck), + CLK(NULL, "l4_div_ck", &l4_div_ck), + CLK(NULL, "lp_clk_div_ck", &lp_clk_div_ck), + CLK(NULL, "l4_wkup_clk_mux_ck", &l4_wkup_clk_mux_ck), + CLK("smp_twd", NULL, &mpu_periphclk), + CLK(NULL, "ocp_abe_iclk", &ocp_abe_iclk), + CLK(NULL, "per_abe_24m_fclk", &per_abe_24m_fclk), + CLK(NULL, "per_abe_nc_fclk", &per_abe_nc_fclk), + CLK(NULL, "syc_clk_div_ck", &syc_clk_div_ck), + CLK(NULL, "aes1_fck", &aes1_fck), + CLK(NULL, "aes2_fck", &aes2_fck), + CLK(NULL, "dmic_sync_mux_ck", &dmic_sync_mux_ck), + CLK(NULL, "func_dmic_abe_gfclk", &func_dmic_abe_gfclk), + CLK(NULL, "dss_sys_clk", &dss_sys_clk), + CLK(NULL, "dss_tv_clk", &dss_tv_clk), + CLK(NULL, "dss_dss_clk", &dss_dss_clk), + CLK(NULL, "dss_48mhz_clk", &dss_48mhz_clk), + CLK(NULL, "dss_fck", &dss_fck), + CLK("omapdss_dss", "ick", &dss_fck), + CLK(NULL, "fdif_fck", &fdif_fck), + CLK(NULL, "gpio1_dbclk", &gpio1_dbclk), + CLK(NULL, "gpio2_dbclk", &gpio2_dbclk), + CLK(NULL, "gpio3_dbclk", &gpio3_dbclk), + CLK(NULL, "gpio4_dbclk", &gpio4_dbclk), + CLK(NULL, "gpio5_dbclk", &gpio5_dbclk), + CLK(NULL, "gpio6_dbclk", &gpio6_dbclk), + CLK(NULL, "sgx_clk_mux", &sgx_clk_mux), + CLK(NULL, "hsi_fck", &hsi_fck), + CLK(NULL, "iss_ctrlclk", &iss_ctrlclk), + CLK(NULL, "mcasp_sync_mux_ck", &mcasp_sync_mux_ck), + CLK(NULL, "func_mcasp_abe_gfclk", &func_mcasp_abe_gfclk), + CLK(NULL, "mcbsp1_sync_mux_ck", &mcbsp1_sync_mux_ck), + CLK(NULL, "func_mcbsp1_gfclk", &func_mcbsp1_gfclk), + CLK(NULL, "mcbsp2_sync_mux_ck", &mcbsp2_sync_mux_ck), + CLK(NULL, "func_mcbsp2_gfclk", &func_mcbsp2_gfclk), + CLK(NULL, "mcbsp3_sync_mux_ck", &mcbsp3_sync_mux_ck), + CLK(NULL, "func_mcbsp3_gfclk", &func_mcbsp3_gfclk), + CLK(NULL, "mcbsp4_sync_mux_ck", &mcbsp4_sync_mux_ck), + CLK(NULL, "per_mcbsp4_gfclk", &per_mcbsp4_gfclk), + CLK(NULL, "hsmmc1_fclk", &hsmmc1_fclk), + CLK(NULL, "hsmmc2_fclk", &hsmmc2_fclk), + CLK(NULL, "ocp2scp_usb_phy_phy_48m", &ocp2scp_usb_phy_phy_48m), + CLK(NULL, "sha2md5_fck", &sha2md5_fck), + CLK(NULL, "slimbus1_fclk_1", &slimbus1_fclk_1), + CLK(NULL, "slimbus1_fclk_0", &slimbus1_fclk_0), + CLK(NULL, "slimbus1_fclk_2", &slimbus1_fclk_2), + CLK(NULL, "slimbus1_slimbus_clk", &slimbus1_slimbus_clk), + CLK(NULL, "slimbus2_fclk_1", &slimbus2_fclk_1), + CLK(NULL, "slimbus2_fclk_0", &slimbus2_fclk_0), + CLK(NULL, "slimbus2_slimbus_clk", &slimbus2_slimbus_clk), + CLK(NULL, "smartreflex_core_fck", &smartreflex_core_fck), + CLK(NULL, "smartreflex_iva_fck", &smartreflex_iva_fck), + CLK(NULL, "smartreflex_mpu_fck", &smartreflex_mpu_fck), + CLK(NULL, "dmt1_clk_mux", &dmt1_clk_mux), + CLK(NULL, "cm2_dm10_mux", &cm2_dm10_mux), + CLK(NULL, "cm2_dm11_mux", &cm2_dm11_mux), + CLK(NULL, "cm2_dm2_mux", &cm2_dm2_mux), + CLK(NULL, "cm2_dm3_mux", &cm2_dm3_mux), + CLK(NULL, "cm2_dm4_mux", &cm2_dm4_mux), + CLK(NULL, "timer5_sync_mux", &timer5_sync_mux), + CLK(NULL, "timer6_sync_mux", &timer6_sync_mux), + CLK(NULL, "timer7_sync_mux", &timer7_sync_mux), + CLK(NULL, "timer8_sync_mux", &timer8_sync_mux), + CLK(NULL, "cm2_dm9_mux", &cm2_dm9_mux), + CLK(NULL, "usb_host_fs_fck", &usb_host_fs_fck), + CLK("usbhs_omap", "fs_fck", &usb_host_fs_fck), + CLK(NULL, "utmi_p1_gfclk", &utmi_p1_gfclk), + CLK(NULL, "usb_host_hs_utmi_p1_clk", &usb_host_hs_utmi_p1_clk), + CLK(NULL, "utmi_p2_gfclk", &utmi_p2_gfclk), + CLK(NULL, "usb_host_hs_utmi_p2_clk", &usb_host_hs_utmi_p2_clk), + CLK(NULL, "usb_host_hs_utmi_p3_clk", &usb_host_hs_utmi_p3_clk), + CLK(NULL, "usb_host_hs_hsic480m_p1_clk", &usb_host_hs_hsic480m_p1_clk), + CLK(NULL, "usb_host_hs_hsic60m_p1_clk", &usb_host_hs_hsic60m_p1_clk), + CLK(NULL, "usb_host_hs_hsic60m_p2_clk", &usb_host_hs_hsic60m_p2_clk), + CLK(NULL, "usb_host_hs_hsic480m_p2_clk", &usb_host_hs_hsic480m_p2_clk), + CLK(NULL, "usb_host_hs_func48mclk", &usb_host_hs_func48mclk), + CLK(NULL, "usb_host_hs_fck", &usb_host_hs_fck), + CLK("usbhs_omap", "hs_fck", &usb_host_hs_fck), + CLK(NULL, "otg_60m_gfclk", &otg_60m_gfclk), + CLK(NULL, "usb_otg_hs_xclk", &usb_otg_hs_xclk), + CLK(NULL, "usb_otg_hs_ick", &usb_otg_hs_ick), + CLK("musb-omap2430", "ick", &usb_otg_hs_ick), + CLK(NULL, "usb_phy_cm_clk32k", &usb_phy_cm_clk32k), + CLK(NULL, "usb_tll_hs_usb_ch2_clk", &usb_tll_hs_usb_ch2_clk), + CLK(NULL, "usb_tll_hs_usb_ch0_clk", &usb_tll_hs_usb_ch0_clk), + CLK(NULL, "usb_tll_hs_usb_ch1_clk", &usb_tll_hs_usb_ch1_clk), + CLK(NULL, "usb_tll_hs_ick", &usb_tll_hs_ick), + CLK("usbhs_omap", "usbtll_ick", &usb_tll_hs_ick), + CLK("usbhs_tll", "usbtll_ick", &usb_tll_hs_ick), + CLK(NULL, "usim_ck", &usim_ck), + CLK(NULL, "usim_fclk", &usim_fclk), + CLK(NULL, "pmd_stm_clock_mux_ck", &pmd_stm_clock_mux_ck), + CLK(NULL, "pmd_trace_clk_mux_ck", &pmd_trace_clk_mux_ck), + CLK(NULL, "stm_clk_div_ck", &stm_clk_div_ck), + CLK(NULL, "trace_clk_div_ck", &trace_clk_div_ck), + CLK(NULL, "auxclk0_src_ck", &auxclk0_src_ck), + CLK(NULL, "auxclk0_ck", &auxclk0_ck), + CLK(NULL, "auxclkreq0_ck", &auxclkreq0_ck), + CLK(NULL, "auxclk1_src_ck", &auxclk1_src_ck), + CLK(NULL, "auxclk1_ck", &auxclk1_ck), + CLK(NULL, "auxclkreq1_ck", &auxclkreq1_ck), + CLK(NULL, "auxclk2_src_ck", &auxclk2_src_ck), + CLK(NULL, "auxclk2_ck", &auxclk2_ck), + CLK(NULL, "auxclkreq2_ck", &auxclkreq2_ck), + CLK(NULL, "auxclk3_src_ck", &auxclk3_src_ck), + CLK(NULL, "auxclk3_ck", &auxclk3_ck), + CLK(NULL, "auxclkreq3_ck", &auxclkreq3_ck), + CLK(NULL, "auxclk4_src_ck", &auxclk4_src_ck), + CLK(NULL, "auxclk4_ck", &auxclk4_ck), + CLK(NULL, "auxclkreq4_ck", &auxclkreq4_ck), + CLK(NULL, "auxclk5_src_ck", &auxclk5_src_ck), + CLK(NULL, "auxclk5_ck", &auxclk5_ck), + CLK(NULL, "auxclkreq5_ck", &auxclkreq5_ck), + CLK("omap-gpmc", "fck", &dummy_ck), + CLK("omap_i2c.1", "ick", &dummy_ck), + CLK("omap_i2c.2", "ick", &dummy_ck), + CLK("omap_i2c.3", "ick", &dummy_ck), + CLK("omap_i2c.4", "ick", &dummy_ck), + CLK(NULL, "mailboxes_ick", &dummy_ck), + CLK("omap_hsmmc.0", "ick", &dummy_ck), + CLK("omap_hsmmc.1", "ick", &dummy_ck), + CLK("omap_hsmmc.2", "ick", &dummy_ck), + CLK("omap_hsmmc.3", "ick", &dummy_ck), + CLK("omap_hsmmc.4", "ick", &dummy_ck), + CLK("omap-mcbsp.1", "ick", &dummy_ck), + CLK("omap-mcbsp.2", "ick", &dummy_ck), + CLK("omap-mcbsp.3", "ick", &dummy_ck), + CLK("omap-mcbsp.4", "ick", &dummy_ck), + CLK("omap2_mcspi.1", "ick", &dummy_ck), + CLK("omap2_mcspi.2", "ick", &dummy_ck), + CLK("omap2_mcspi.3", "ick", &dummy_ck), + CLK("omap2_mcspi.4", "ick", &dummy_ck), + CLK(NULL, "uart1_ick", &dummy_ck), + CLK(NULL, "uart2_ick", &dummy_ck), + CLK(NULL, "uart3_ick", &dummy_ck), + CLK(NULL, "uart4_ick", &dummy_ck), + CLK("usbhs_omap", "usbhost_ick", &dummy_ck), + CLK("usbhs_omap", "usbtll_fck", &dummy_ck), + CLK("usbhs_tll", "usbtll_fck", &dummy_ck), + CLK("omap_wdt", "ick", &dummy_ck), + CLK(NULL, "timer_32k_ck", &sys_32k_ck), /* TODO: Remove "omap_timer.X" aliases once DT migration is complete */ - CLK("omap_timer.1", "timer_sys_ck", &sys_clkin_ck, CK_443X), - CLK("omap_timer.2", "timer_sys_ck", &sys_clkin_ck, CK_443X), - CLK("omap_timer.3", "timer_sys_ck", &sys_clkin_ck, CK_443X), - CLK("omap_timer.4", "timer_sys_ck", &sys_clkin_ck, CK_443X), - CLK("omap_timer.9", "timer_sys_ck", &sys_clkin_ck, CK_443X), - CLK("omap_timer.10", "timer_sys_ck", &sys_clkin_ck, CK_443X), - CLK("omap_timer.11", "timer_sys_ck", &sys_clkin_ck, CK_443X), - CLK("omap_timer.5", "timer_sys_ck", &syc_clk_div_ck, CK_443X), - CLK("omap_timer.6", "timer_sys_ck", &syc_clk_div_ck, CK_443X), - CLK("omap_timer.7", "timer_sys_ck", &syc_clk_div_ck, CK_443X), - CLK("omap_timer.8", "timer_sys_ck", &syc_clk_div_ck, CK_443X), - CLK("4a318000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X), - CLK("48032000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X), - CLK("48034000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X), - CLK("48036000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X), - CLK("4803e000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X), - CLK("48086000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X), - CLK("48088000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X), - CLK("40138000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X), - CLK("4013a000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X), - CLK("4013c000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X), - CLK("4013e000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X), - CLK(NULL, "cpufreq_ck", &dpll_mpu_ck, CK_443X), + CLK("omap_timer.1", "timer_sys_ck", &sys_clkin_ck), + CLK("omap_timer.2", "timer_sys_ck", &sys_clkin_ck), + CLK("omap_timer.3", "timer_sys_ck", &sys_clkin_ck), + CLK("omap_timer.4", "timer_sys_ck", &sys_clkin_ck), + CLK("omap_timer.9", "timer_sys_ck", &sys_clkin_ck), + CLK("omap_timer.10", "timer_sys_ck", &sys_clkin_ck), + CLK("omap_timer.11", "timer_sys_ck", &sys_clkin_ck), + CLK("omap_timer.5", "timer_sys_ck", &syc_clk_div_ck), + CLK("omap_timer.6", "timer_sys_ck", &syc_clk_div_ck), + CLK("omap_timer.7", "timer_sys_ck", &syc_clk_div_ck), + CLK("omap_timer.8", "timer_sys_ck", &syc_clk_div_ck), + CLK("4a318000.timer", "timer_sys_ck", &sys_clkin_ck), + CLK("48032000.timer", "timer_sys_ck", &sys_clkin_ck), + CLK("48034000.timer", "timer_sys_ck", &sys_clkin_ck), + CLK("48036000.timer", "timer_sys_ck", &sys_clkin_ck), + CLK("4803e000.timer", "timer_sys_ck", &sys_clkin_ck), + CLK("48086000.timer", "timer_sys_ck", &sys_clkin_ck), + CLK("48088000.timer", "timer_sys_ck", &sys_clkin_ck), + CLK("40138000.timer", "timer_sys_ck", &syc_clk_div_ck), + CLK("4013a000.timer", "timer_sys_ck", &syc_clk_div_ck), + CLK("4013c000.timer", "timer_sys_ck", &syc_clk_div_ck), + CLK("4013e000.timer", "timer_sys_ck", &syc_clk_div_ck), + CLK(NULL, "cpufreq_ck", &dpll_mpu_ck), }; int __init omap4xxx_clk_init(void) { - u32 cpu_clkflg; - struct omap_clk *c; int rc; if (cpu_is_omap443x()) { cpu_mask = RATE_IN_4430; - cpu_clkflg = CK_443X; + omap_clocks_register(omap443x_clks, ARRAY_SIZE(omap443x_clks)); } else if (cpu_is_omap446x() || cpu_is_omap447x()) { cpu_mask = RATE_IN_4460 | RATE_IN_4430; - cpu_clkflg = CK_446X | CK_443X; - + omap_clocks_register(omap446x_clks, ARRAY_SIZE(omap446x_clks)); if (cpu_is_omap447x()) pr_warn("WARNING: OMAP4470 clock data incomplete!\n"); } else { return 0; } - for (c = omap44xx_clks; c < omap44xx_clks + ARRAY_SIZE(omap44xx_clks); - c++) { - if (c->cpu & cpu_clkflg) { - clkdev_add(&c->lk); - if (!__clk_init(NULL, c->lk.clk)) - omap2_init_clk_hw_omap_clocks(c->lk.clk); - } - } + omap_clocks_register(omap44xx_clks, ARRAY_SIZE(omap44xx_clks)); omap2_clk_disable_autoidle_all(); diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index e4ec3a69ee2e..0c38ca96c840 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -23,7 +23,7 @@ #include <linux/clk-provider.h> #include <linux/io.h> #include <linux/bitops.h> - +#include <linux/clk-private.h> #include <asm/cpu.h> @@ -569,6 +569,21 @@ const struct clk_hw_omap_ops clkhwops_wait = { }; /** + * omap_clocks_register - register an array of omap_clk + * @ocs: pointer to an array of omap_clk to register + */ +void __init omap_clocks_register(struct omap_clk oclks[], int cnt) +{ + struct omap_clk *c; + + for (c = oclks; c < oclks + cnt; c++) { + clkdev_add(&c->lk); + if (!__clk_init(NULL, c->lk.clk)) + omap2_init_clk_hw_omap_clocks(c->lk.clk); + } +} + +/** * omap2_clk_switch_mpurate_at_boot - switch ARM MPU rate by boot-time argument * @mpurate_ck_name: clk name of the clock to change rate * @@ -596,7 +611,7 @@ int __init omap2_clk_switch_mpurate_at_boot(const char *mpurate_ck_name) return -ENOENT; r = clk_set_rate(mpurate_ck, mpurate); - if (IS_ERR_VALUE(r)) { + if (r < 0) { WARN(1, "clock: %s: unable to set MPU rate to %d: %d\n", mpurate_ck_name, mpurate, r); clk_put(mpurate_ck); diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index 60ddd8612b4d..7aa32cd292f9 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -27,9 +27,8 @@ struct omap_clk { struct clk_lookup lk; }; -#define CLK(dev, con, ck, cp) \ +#define CLK(dev, con, ck) \ { \ - .cpu = cp, \ .lk = { \ .dev_id = dev, \ .con_id = con, \ @@ -37,22 +36,6 @@ struct omap_clk { }, \ } -/* Platform flags for the clkdev-OMAP integration code */ -#define CK_242X (1 << 0) -#define CK_243X (1 << 1) /* 243x, 253x */ -#define CK_3430ES1 (1 << 2) /* 34xxES1 only */ -#define CK_3430ES2PLUS (1 << 3) /* 34xxES2, ES3, non-Sitara 35xx only */ -#define CK_AM35XX (1 << 4) /* Sitara AM35xx */ -#define CK_36XX (1 << 5) /* 36xx/37xx-specific clocks */ -#define CK_443X (1 << 6) -#define CK_TI816X (1 << 7) -#define CK_446X (1 << 8) -#define CK_AM33XX (1 << 9) /* AM33xx specific clocks */ - - -#define CK_34XX (CK_3430ES1 | CK_3430ES2PLUS) -#define CK_3XXX (CK_34XX | CK_AM35XX | CK_36XX) - struct clockdomain; #define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw) @@ -480,4 +463,5 @@ extern int am33xx_clk_init(void); extern int omap2_clkops_enable_clkdm(struct clk_hw *hw); extern void omap2_clkops_disable_clkdm(struct clk_hw *hw); +extern void omap_clocks_register(struct omap_clk *oclks, int cnt); #endif diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index d6ba13e1c540..d555cf2459e1 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -82,8 +82,7 @@ extern void omap2_init_common_infrastructure(void); extern void omap2_sync32k_timer_init(void); extern void omap3_sync32k_timer_init(void); extern void omap3_secure_sync32k_timer_init(void); -extern void omap3_gp_gptimer_timer_init(void); -extern void omap3_am33xx_gptimer_timer_init(void); +extern void omap3_gptimer_timer_init(void); extern void omap4_local_timer_init(void); extern void omap5_realtime_timer_init(void); @@ -110,6 +109,14 @@ void am35xx_init_late(void); void ti81xx_init_late(void); int omap2_common_pm_late_init(void); +#ifdef CONFIG_SOC_BUS +void omap_soc_device_init(void); +#else +static inline void omap_soc_device_init(void) +{ +} +#endif + #if defined(CONFIG_SOC_OMAP2420) || defined(CONFIG_SOC_OMAP2430) void omap2xxx_restart(char mode, const char *cmd); #else @@ -249,7 +256,6 @@ extern int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state); extern int omap4_finish_suspend(unsigned long cpu_state); extern void omap4_cpu_resume(void); extern int omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state); -extern u32 omap4_mpuss_read_prev_context_state(void); #else static inline int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state) @@ -277,10 +283,6 @@ static inline int omap4_finish_suspend(unsigned long cpu_state) static inline void omap4_cpu_resume(void) {} -static inline u32 omap4_mpuss_read_prev_context_state(void) -{ - return 0; -} #endif struct omap_sdrc_params; diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index 80392fca86c6..e18709d3b95d 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -26,6 +26,7 @@ #include <linux/cpuidle.h> #include <linux/export.h> #include <linux/cpu_pm.h> +#include <asm/cpuidle.h> #include "powerdomain.h" #include "clockdomain.h" @@ -99,16 +100,18 @@ static struct omap3_idle_statedata omap3_idle_data[] = { }, }; -/* Private functions */ - -static int __omap3_enter_idle(struct cpuidle_device *dev, - struct cpuidle_driver *drv, - int index) +/** + * omap3_enter_idle - Programs OMAP3 to enter the specified state + * @dev: cpuidle device + * @drv: cpuidle driver + * @index: the index of state to be entered + */ +static int omap3_enter_idle(struct cpuidle_device *dev, + struct cpuidle_driver *drv, + int index) { struct omap3_idle_statedata *cx = &omap3_idle_data[index]; - local_fiq_disable(); - if (omap_irq_pending() || need_resched()) goto return_sleep_time; @@ -143,28 +146,11 @@ static int __omap3_enter_idle(struct cpuidle_device *dev, clkdm_allow_idle(mpu_pd->pwrdm_clkdms[0]); return_sleep_time: - local_fiq_enable(); return index; } /** - * omap3_enter_idle - Programs OMAP3 to enter the specified state - * @dev: cpuidle device - * @drv: cpuidle driver - * @index: the index of state to be entered - * - * Called from the CPUidle framework to program the device to the - * specified target state selected by the governor. - */ -static inline int omap3_enter_idle(struct cpuidle_device *dev, - struct cpuidle_driver *drv, - int index) -{ - return cpuidle_wrap_enter(dev, drv, index, __omap3_enter_idle); -} - -/** * next_valid_state - Find next valid C-state * @dev: cpuidle device * @drv: cpuidle driver @@ -271,11 +257,9 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev, return ret; } -static DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev); - static struct cpuidle_driver omap3_idle_driver = { - .name = "omap3_idle", - .owner = THIS_MODULE, + .name = "omap3_idle", + .owner = THIS_MODULE, .states = { { .enter = omap3_enter_idle_bm, @@ -348,8 +332,6 @@ static struct cpuidle_driver omap3_idle_driver = { */ int __init omap3_idle_init(void) { - struct cpuidle_device *dev; - mpu_pd = pwrdm_lookup("mpu_pwrdm"); core_pd = pwrdm_lookup("core_pwrdm"); per_pd = pwrdm_lookup("per_pwrdm"); @@ -358,16 +340,5 @@ int __init omap3_idle_init(void) if (!mpu_pd || !core_pd || !per_pd || !cam_pd) return -ENODEV; - cpuidle_register_driver(&omap3_idle_driver); - - dev = &per_cpu(omap3_idle_dev, smp_processor_id()); - dev->cpu = 0; - - if (cpuidle_register_device(dev)) { - printk(KERN_ERR "%s: CPUidle register device failed\n", - __func__); - return -EIO; - } - - return 0; + return cpuidle_register(&omap3_idle_driver, NULL); } diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c index d639aef0deda..c443f2e97e10 100644 --- a/arch/arm/mach-omap2/cpuidle44xx.c +++ b/arch/arm/mach-omap2/cpuidle44xx.c @@ -1,7 +1,7 @@ /* - * OMAP4 CPU idle Routines + * OMAP4+ CPU idle Routines * - * Copyright (C) 2011 Texas Instruments, Inc. + * Copyright (C) 2011-2013 Texas Instruments, Inc. * Santosh Shilimkar <santosh.shilimkar@ti.com> * Rajendra Nayak <rnayak@ti.com> * @@ -14,8 +14,8 @@ #include <linux/cpuidle.h> #include <linux/cpu_pm.h> #include <linux/export.h> -#include <linux/clockchips.h> +#include <asm/cpuidle.h> #include <asm/proc-fns.h> #include "common.h" @@ -24,13 +24,13 @@ #include "clockdomain.h" /* Machine specific information */ -struct omap4_idle_statedata { +struct idle_statedata { u32 cpu_state; u32 mpu_logic_state; u32 mpu_state; }; -static struct omap4_idle_statedata omap4_idle_data[] = { +static struct idle_statedata omap4_idle_data[] = { { .cpu_state = PWRDM_POWER_ON, .mpu_state = PWRDM_POWER_ON, @@ -53,11 +53,12 @@ static struct clockdomain *cpu_clkdm[NR_CPUS]; static atomic_t abort_barrier; static bool cpu_done[NR_CPUS]; +static struct idle_statedata *state_ptr = &omap4_idle_data[0]; /* Private functions */ /** - * omap4_enter_idle_coupled_[simple/coupled] - OMAP4 cpuidle entry functions + * omap_enter_idle_[simple/coupled] - OMAP4PLUS cpuidle entry functions * @dev: cpuidle device * @drv: cpuidle driver * @index: the index of state to be entered @@ -66,25 +67,19 @@ static bool cpu_done[NR_CPUS]; * specified low power state selected by the governor. * Returns the amount of time spent in the low power state. */ -static int omap4_enter_idle_simple(struct cpuidle_device *dev, +static int omap_enter_idle_simple(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) { - local_fiq_disable(); omap_do_wfi(); - local_fiq_enable(); - return index; } -static int omap4_enter_idle_coupled(struct cpuidle_device *dev, +static int omap_enter_idle_coupled(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) { - struct omap4_idle_statedata *cx = &omap4_idle_data[index]; - int cpu_id = smp_processor_id(); - - local_fiq_disable(); + struct idle_statedata *cx = state_ptr + index; /* * CPU0 has to wait and stay ON until CPU1 is OFF state. @@ -109,8 +104,6 @@ static int omap4_enter_idle_coupled(struct cpuidle_device *dev, } } - clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu_id); - /* * Call idle CPU PM enter notifier chain so that * VFP and per CPU interrupt context is saved. @@ -136,6 +129,7 @@ static int omap4_enter_idle_coupled(struct cpuidle_device *dev, /* Wakeup CPU1 only if it is not offlined */ if (dev->cpu == 0 && cpumask_test_cpu(1, cpu_online_mask)) { clkdm_wakeup(cpu_clkdm[1]); + omap_set_pwrdm_state(cpu_pd[1], PWRDM_POWER_ON); clkdm_allow_idle(cpu_clkdm[1]); } @@ -149,63 +143,49 @@ static int omap4_enter_idle_coupled(struct cpuidle_device *dev, * Call idle CPU cluster PM exit notifier chain * to restore GIC and wakeupgen context. */ - if (omap4_mpuss_read_prev_context_state()) + if ((cx->mpu_state == PWRDM_POWER_RET) && + (cx->mpu_logic_state == PWRDM_POWER_OFF)) cpu_cluster_pm_exit(); - clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu_id); - fail: cpuidle_coupled_parallel_barrier(dev, &abort_barrier); cpu_done[dev->cpu] = false; - local_fiq_enable(); - return index; } -/* - * For each cpu, setup the broadcast timer because local timers - * stops for the states above C1. - */ -static void omap_setup_broadcast_timer(void *arg) -{ - int cpu = smp_processor_id(); - clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ON, &cpu); -} - -static DEFINE_PER_CPU(struct cpuidle_device, omap4_idle_dev); - static struct cpuidle_driver omap4_idle_driver = { .name = "omap4_idle", .owner = THIS_MODULE, - .en_core_tk_irqen = 1, .states = { { /* C1 - CPU0 ON + CPU1 ON + MPU ON */ .exit_latency = 2 + 2, .target_residency = 5, .flags = CPUIDLE_FLAG_TIME_VALID, - .enter = omap4_enter_idle_simple, + .enter = omap_enter_idle_simple, .name = "C1", - .desc = "MPUSS ON" + .desc = "CPUx ON, MPUSS ON" }, { /* C2 - CPU0 OFF + CPU1 OFF + MPU CSWR */ .exit_latency = 328 + 440, .target_residency = 960, - .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED, - .enter = omap4_enter_idle_coupled, + .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED | + CPUIDLE_FLAG_TIMER_STOP, + .enter = omap_enter_idle_coupled, .name = "C2", - .desc = "MPUSS CSWR", + .desc = "CPUx OFF, MPUSS CSWR", }, { /* C3 - CPU0 OFF + CPU1 OFF + MPU OSWR */ .exit_latency = 460 + 518, .target_residency = 1100, - .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED, - .enter = omap4_enter_idle_coupled, + .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED | + CPUIDLE_FLAG_TIMER_STOP, + .enter = omap_enter_idle_coupled, .name = "C3", - .desc = "MPUSS OSWR", + .desc = "CPUx OFF, MPUSS OSWR", }, }, .state_count = ARRAY_SIZE(omap4_idle_data), @@ -215,16 +195,13 @@ static struct cpuidle_driver omap4_idle_driver = { /* Public functions */ /** - * omap4_idle_init - Init routine for OMAP4 idle + * omap4_idle_init - Init routine for OMAP4+ idle * - * Registers the OMAP4 specific cpuidle driver to the cpuidle + * Registers the OMAP4+ specific cpuidle driver to the cpuidle * framework with the valid set of states. */ int __init omap4_idle_init(void) { - struct cpuidle_device *dev; - unsigned int cpu_id = 0; - mpu_pd = pwrdm_lookup("mpu_pwrdm"); cpu_pd[0] = pwrdm_lookup("cpu0_pwrdm"); cpu_pd[1] = pwrdm_lookup("cpu1_pwrdm"); @@ -236,22 +213,5 @@ int __init omap4_idle_init(void) if (!cpu_clkdm[0] || !cpu_clkdm[1]) return -ENODEV; - /* Configure the broadcast timer on each cpu */ - on_each_cpu(omap_setup_broadcast_timer, NULL, 1); - - for_each_cpu(cpu_id, cpu_online_mask) { - dev = &per_cpu(omap4_idle_dev, cpu_id); - dev->cpu = cpu_id; -#ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED - dev->coupled_cpus = *cpu_online_mask; -#endif - cpuidle_register_driver(&omap4_idle_driver); - - if (cpuidle_register_device(dev)) { - pr_err("%s: CPUidle register failed\n", __func__); - return -EIO; - } - } - - return 0; + return cpuidle_register(&omap4_idle_driver, cpu_online_mask); } diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 1ec7f0597710..4269fc145698 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -504,140 +504,31 @@ static void omap_init_rng(void) WARN(IS_ERR(pdev), "Can't build omap_device for omap_rng\n"); } -#if defined(CONFIG_CRYPTO_DEV_OMAP_SHAM) || defined(CONFIG_CRYPTO_DEV_OMAP_SHAM_MODULE) - -#ifdef CONFIG_ARCH_OMAP2 -static struct resource omap2_sham_resources[] = { - { - .start = OMAP24XX_SEC_SHA1MD5_BASE, - .end = OMAP24XX_SEC_SHA1MD5_BASE + 0x64, - .flags = IORESOURCE_MEM, - }, - { - .start = 51 + OMAP_INTC_START, - .flags = IORESOURCE_IRQ, - } -}; -static int omap2_sham_resources_sz = ARRAY_SIZE(omap2_sham_resources); -#else -#define omap2_sham_resources NULL -#define omap2_sham_resources_sz 0 -#endif - -#ifdef CONFIG_ARCH_OMAP3 -static struct resource omap3_sham_resources[] = { - { - .start = OMAP34XX_SEC_SHA1MD5_BASE, - .end = OMAP34XX_SEC_SHA1MD5_BASE + 0x64, - .flags = IORESOURCE_MEM, - }, - { - .start = 49 + OMAP_INTC_START, - .flags = IORESOURCE_IRQ, - }, - { - .start = OMAP34XX_DMA_SHA1MD5_RX, - .flags = IORESOURCE_DMA, - } -}; -static int omap3_sham_resources_sz = ARRAY_SIZE(omap3_sham_resources); -#else -#define omap3_sham_resources NULL -#define omap3_sham_resources_sz 0 -#endif - -static struct platform_device sham_device = { - .name = "omap-sham", - .id = -1, -}; - -static void omap_init_sham(void) +static void __init omap_init_sham(void) { - if (cpu_is_omap24xx()) { - sham_device.resource = omap2_sham_resources; - sham_device.num_resources = omap2_sham_resources_sz; - } else if (cpu_is_omap34xx()) { - sham_device.resource = omap3_sham_resources; - sham_device.num_resources = omap3_sham_resources_sz; - } else { - pr_err("%s: platform not supported\n", __func__); - return; - } - platform_device_register(&sham_device); -} -#else -static inline void omap_init_sham(void) { } -#endif - -#if defined(CONFIG_CRYPTO_DEV_OMAP_AES) || defined(CONFIG_CRYPTO_DEV_OMAP_AES_MODULE) - -#ifdef CONFIG_ARCH_OMAP2 -static struct resource omap2_aes_resources[] = { - { - .start = OMAP24XX_SEC_AES_BASE, - .end = OMAP24XX_SEC_AES_BASE + 0x4C, - .flags = IORESOURCE_MEM, - }, - { - .start = OMAP24XX_DMA_AES_TX, - .flags = IORESOURCE_DMA, - }, - { - .start = OMAP24XX_DMA_AES_RX, - .flags = IORESOURCE_DMA, - } -}; -static int omap2_aes_resources_sz = ARRAY_SIZE(omap2_aes_resources); -#else -#define omap2_aes_resources NULL -#define omap2_aes_resources_sz 0 -#endif + struct omap_hwmod *oh; + struct platform_device *pdev; -#ifdef CONFIG_ARCH_OMAP3 -static struct resource omap3_aes_resources[] = { - { - .start = OMAP34XX_SEC_AES_BASE, - .end = OMAP34XX_SEC_AES_BASE + 0x4C, - .flags = IORESOURCE_MEM, - }, - { - .start = OMAP34XX_DMA_AES2_TX, - .flags = IORESOURCE_DMA, - }, - { - .start = OMAP34XX_DMA_AES2_RX, - .flags = IORESOURCE_DMA, - } -}; -static int omap3_aes_resources_sz = ARRAY_SIZE(omap3_aes_resources); -#else -#define omap3_aes_resources NULL -#define omap3_aes_resources_sz 0 -#endif + oh = omap_hwmod_lookup("sham"); + if (!oh) + return; -static struct platform_device aes_device = { - .name = "omap-aes", - .id = -1, -}; + pdev = omap_device_build("omap-sham", -1, oh, NULL, 0); + WARN(IS_ERR(pdev), "Can't build omap_device for omap-sham\n"); +} -static void omap_init_aes(void) +static void __init omap_init_aes(void) { - if (cpu_is_omap24xx()) { - aes_device.resource = omap2_aes_resources; - aes_device.num_resources = omap2_aes_resources_sz; - } else if (cpu_is_omap34xx()) { - aes_device.resource = omap3_aes_resources; - aes_device.num_resources = omap3_aes_resources_sz; - } else { - pr_err("%s: platform not supported\n", __func__); + struct omap_hwmod *oh; + struct platform_device *pdev; + + oh = omap_hwmod_lookup("aes"); + if (!oh) return; - } - platform_device_register(&aes_device); -} -#else -static inline void omap_init_aes(void) { } -#endif + pdev = omap_device_build("omap-aes", -1, oh, NULL, 0); + WARN(IS_ERR(pdev), "Can't build omap_device for omap-aes\n"); +} /*-------------------------------------------------------------------------*/ @@ -764,11 +655,11 @@ static int __init omap2_init_devices(void) omap_init_dmic(); omap_init_mcpdm(); omap_init_mcspi(); + omap_init_sham(); + omap_init_aes(); } omap_init_sti(); omap_init_rng(); - omap_init_sham(); - omap_init_aes(); omap_init_vout(); omap_init_ocp2scp(); diff --git a/arch/arm/mach-omap2/dma.h b/arch/arm/mach-omap2/dma.h index eba80dbc5218..65f80cacf178 100644 --- a/arch/arm/mach-omap2/dma.h +++ b/arch/arm/mach-omap2/dma.h @@ -22,69 +22,20 @@ /* DMA channels for 24xx */ #define OMAP24XX_DMA_NO_DEVICE 0 -#define OMAP24XX_DMA_XTI_DMA 1 /* S_DMA_0 */ #define OMAP24XX_DMA_EXT_DMAREQ0 2 /* S_DMA_1 */ #define OMAP24XX_DMA_EXT_DMAREQ1 3 /* S_DMA_2 */ #define OMAP24XX_DMA_GPMC 4 /* S_DMA_3 */ -#define OMAP24XX_DMA_GFX 5 /* S_DMA_4 */ -#define OMAP24XX_DMA_DSS 6 /* S_DMA_5 */ -#define OMAP242X_DMA_VLYNQ_TX 7 /* S_DMA_6 */ -#define OMAP24XX_DMA_EXT_DMAREQ2 7 /* S_DMA_6 */ -#define OMAP24XX_DMA_CWT 8 /* S_DMA_7 */ #define OMAP24XX_DMA_AES_TX 9 /* S_DMA_8 */ #define OMAP24XX_DMA_AES_RX 10 /* S_DMA_9 */ -#define OMAP24XX_DMA_DES_TX 11 /* S_DMA_10 */ -#define OMAP24XX_DMA_DES_RX 12 /* S_DMA_11 */ -#define OMAP24XX_DMA_SHA1MD5_RX 13 /* S_DMA_12 */ -#define OMAP34XX_DMA_SHA2MD5_RX 13 /* S_DMA_12 */ #define OMAP242X_DMA_EXT_DMAREQ2 14 /* S_DMA_13 */ #define OMAP242X_DMA_EXT_DMAREQ3 15 /* S_DMA_14 */ #define OMAP242X_DMA_EXT_DMAREQ4 16 /* S_DMA_15 */ -#define OMAP242X_DMA_EAC_AC_RD 17 /* S_DMA_16 */ -#define OMAP242X_DMA_EAC_AC_WR 18 /* S_DMA_17 */ -#define OMAP242X_DMA_EAC_MD_UL_RD 19 /* S_DMA_18 */ -#define OMAP242X_DMA_EAC_MD_UL_WR 20 /* S_DMA_19 */ -#define OMAP242X_DMA_EAC_MD_DL_RD 21 /* S_DMA_20 */ -#define OMAP242X_DMA_EAC_MD_DL_WR 22 /* S_DMA_21 */ -#define OMAP242X_DMA_EAC_BT_UL_RD 23 /* S_DMA_22 */ -#define OMAP242X_DMA_EAC_BT_UL_WR 24 /* S_DMA_23 */ -#define OMAP242X_DMA_EAC_BT_DL_RD 25 /* S_DMA_24 */ -#define OMAP242X_DMA_EAC_BT_DL_WR 26 /* S_DMA_25 */ -#define OMAP243X_DMA_EXT_DMAREQ3 14 /* S_DMA_13 */ -#define OMAP24XX_DMA_SPI3_TX0 15 /* S_DMA_14 */ -#define OMAP24XX_DMA_SPI3_RX0 16 /* S_DMA_15 */ -#define OMAP24XX_DMA_MCBSP3_TX 17 /* S_DMA_16 */ -#define OMAP24XX_DMA_MCBSP3_RX 18 /* S_DMA_17 */ -#define OMAP24XX_DMA_MCBSP4_TX 19 /* S_DMA_18 */ -#define OMAP24XX_DMA_MCBSP4_RX 20 /* S_DMA_19 */ -#define OMAP24XX_DMA_MCBSP5_TX 21 /* S_DMA_20 */ -#define OMAP24XX_DMA_MCBSP5_RX 22 /* S_DMA_21 */ -#define OMAP24XX_DMA_SPI3_TX1 23 /* S_DMA_22 */ -#define OMAP24XX_DMA_SPI3_RX1 24 /* S_DMA_23 */ -#define OMAP243X_DMA_EXT_DMAREQ4 25 /* S_DMA_24 */ -#define OMAP243X_DMA_EXT_DMAREQ5 26 /* S_DMA_25 */ #define OMAP34XX_DMA_I2C3_TX 25 /* S_DMA_24 */ #define OMAP34XX_DMA_I2C3_RX 26 /* S_DMA_25 */ #define OMAP24XX_DMA_I2C1_TX 27 /* S_DMA_26 */ #define OMAP24XX_DMA_I2C1_RX 28 /* S_DMA_27 */ #define OMAP24XX_DMA_I2C2_TX 29 /* S_DMA_28 */ #define OMAP24XX_DMA_I2C2_RX 30 /* S_DMA_29 */ -#define OMAP24XX_DMA_MCBSP1_TX 31 /* S_DMA_30 */ -#define OMAP24XX_DMA_MCBSP1_RX 32 /* S_DMA_31 */ -#define OMAP24XX_DMA_MCBSP2_TX 33 /* S_DMA_32 */ -#define OMAP24XX_DMA_MCBSP2_RX 34 /* S_DMA_33 */ -#define OMAP24XX_DMA_SPI1_TX0 35 /* S_DMA_34 */ -#define OMAP24XX_DMA_SPI1_RX0 36 /* S_DMA_35 */ -#define OMAP24XX_DMA_SPI1_TX1 37 /* S_DMA_36 */ -#define OMAP24XX_DMA_SPI1_RX1 38 /* S_DMA_37 */ -#define OMAP24XX_DMA_SPI1_TX2 39 /* S_DMA_38 */ -#define OMAP24XX_DMA_SPI1_RX2 40 /* S_DMA_39 */ -#define OMAP24XX_DMA_SPI1_TX3 41 /* S_DMA_40 */ -#define OMAP24XX_DMA_SPI1_RX3 42 /* S_DMA_41 */ -#define OMAP24XX_DMA_SPI2_TX0 43 /* S_DMA_42 */ -#define OMAP24XX_DMA_SPI2_RX0 44 /* S_DMA_43 */ -#define OMAP24XX_DMA_SPI2_TX1 45 /* S_DMA_44 */ -#define OMAP24XX_DMA_SPI2_RX1 46 /* S_DMA_45 */ #define OMAP24XX_DMA_MMC2_TX 47 /* S_DMA_46 */ #define OMAP24XX_DMA_MMC2_RX 48 /* S_DMA_47 */ #define OMAP24XX_DMA_UART1_TX 49 /* S_DMA_48 */ @@ -93,33 +44,12 @@ #define OMAP24XX_DMA_UART2_RX 52 /* S_DMA_51 */ #define OMAP24XX_DMA_UART3_TX 53 /* S_DMA_52 */ #define OMAP24XX_DMA_UART3_RX 54 /* S_DMA_53 */ -#define OMAP24XX_DMA_USB_W2FC_TX0 55 /* S_DMA_54 */ -#define OMAP24XX_DMA_USB_W2FC_RX0 56 /* S_DMA_55 */ -#define OMAP24XX_DMA_USB_W2FC_TX1 57 /* S_DMA_56 */ -#define OMAP24XX_DMA_USB_W2FC_RX1 58 /* S_DMA_57 */ -#define OMAP24XX_DMA_USB_W2FC_TX2 59 /* S_DMA_58 */ -#define OMAP24XX_DMA_USB_W2FC_RX2 60 /* S_DMA_59 */ #define OMAP24XX_DMA_MMC1_TX 61 /* S_DMA_60 */ #define OMAP24XX_DMA_MMC1_RX 62 /* S_DMA_61 */ -#define OMAP24XX_DMA_MS 63 /* S_DMA_62 */ #define OMAP242X_DMA_EXT_DMAREQ5 64 /* S_DMA_63 */ -#define OMAP243X_DMA_EXT_DMAREQ6 64 /* S_DMA_63 */ -#define OMAP34XX_DMA_EXT_DMAREQ3 64 /* S_DMA_63 */ #define OMAP34XX_DMA_AES2_TX 65 /* S_DMA_64 */ #define OMAP34XX_DMA_AES2_RX 66 /* S_DMA_65 */ -#define OMAP34XX_DMA_DES2_TX 67 /* S_DMA_66 */ -#define OMAP34XX_DMA_DES2_RX 68 /* S_DMA_67 */ #define OMAP34XX_DMA_SHA1MD5_RX 69 /* S_DMA_68 */ -#define OMAP34XX_DMA_SPI4_TX0 70 /* S_DMA_69 */ -#define OMAP34XX_DMA_SPI4_RX0 71 /* S_DMA_70 */ -#define OMAP34XX_DSS_DMA0 72 /* S_DMA_71 */ -#define OMAP34XX_DSS_DMA1 73 /* S_DMA_72 */ -#define OMAP34XX_DSS_DMA2 74 /* S_DMA_73 */ -#define OMAP34XX_DSS_DMA3 75 /* S_DMA_74 */ -#define OMAP34XX_DMA_MMC3_TX 77 /* S_DMA_76 */ -#define OMAP34XX_DMA_MMC3_RX 78 /* S_DMA_77 */ -#define OMAP34XX_DMA_USIM_TX 79 /* S_DMA_78 */ -#define OMAP34XX_DMA_USIM_RX 80 /* S_DMA_79 */ #define OMAP36XX_DMA_UART4_TX 81 /* S_DMA_80 */ #define OMAP36XX_DMA_UART4_RX 82 /* S_DMA_81 */ diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c index 3aed4b0b9563..3a0296cfcace 100644 --- a/arch/arm/mach-omap2/dpll3xxx.c +++ b/arch/arm/mach-omap2/dpll3xxx.c @@ -307,10 +307,10 @@ static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 freqsel) _omap3_noncore_dpll_bypass(clk); /* - * Set jitter correction. No jitter correction for OMAP4 and 3630 - * since freqsel field is no longer present + * Set jitter correction. Jitter correction applicable for OMAP343X + * only since freqsel field is no longer present on other devices. */ - if (!soc_is_am33xx() && !cpu_is_omap44xx() && !cpu_is_omap3630()) { + if (cpu_is_omap343x()) { v = __raw_readl(dd->control_reg); v &= ~dd->freqsel_mask; v |= freqsel << __ffs(dd->freqsel_mask); @@ -480,29 +480,30 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate, if (!dd) return -EINVAL; - __clk_prepare(dd->clk_bypass); - clk_enable(dd->clk_bypass); - __clk_prepare(dd->clk_ref); - clk_enable(dd->clk_ref); - if (__clk_get_rate(dd->clk_bypass) == rate && (dd->modes & (1 << DPLL_LOW_POWER_BYPASS))) { pr_debug("%s: %s: set rate: entering bypass.\n", __func__, __clk_get_name(hw->clk)); + __clk_prepare(dd->clk_bypass); + clk_enable(dd->clk_bypass); ret = _omap3_noncore_dpll_bypass(clk); if (!ret) new_parent = dd->clk_bypass; + clk_disable(dd->clk_bypass); + __clk_unprepare(dd->clk_bypass); } else { + __clk_prepare(dd->clk_ref); + clk_enable(dd->clk_ref); + if (dd->last_rounded_rate != rate) rate = __clk_round_rate(hw->clk, rate); if (dd->last_rounded_rate == 0) return -EINVAL; - /* No freqsel on AM335x, OMAP4 and OMAP3630 */ - if (!soc_is_am33xx() && !cpu_is_omap44xx() && - !cpu_is_omap3630()) { + /* Freqsel is available only on OMAP343X devices */ + if (cpu_is_omap343x()) { freqsel = _omap3_dpll_compute_freqsel(clk, dd->last_rounded_n); WARN_ON(!freqsel); @@ -514,6 +515,8 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate, ret = omap3_noncore_dpll_program(clk, freqsel); if (!ret) new_parent = dd->clk_ref; + clk_disable(dd->clk_ref); + __clk_unprepare(dd->clk_ref); } /* * FIXME - this is all wrong. common code handles reparenting and @@ -525,11 +528,6 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate, if (!ret) __clk_reparent(hw->clk, new_parent); - clk_disable(dd->clk_ref); - __clk_unprepare(dd->clk_ref); - clk_disable(dd->clk_bypass); - __clk_unprepare(dd->clk_bypass); - return 0; } diff --git a/arch/arm/mach-omap2/dsp.c b/arch/arm/mach-omap2/dsp.c index b155500e84a8..b8208b4b1bd9 100644 --- a/arch/arm/mach-omap2/dsp.c +++ b/arch/arm/mach-omap2/dsp.c @@ -26,7 +26,7 @@ #include "control.h" #include "cm2xxx_3xxx.h" #include "prm2xxx_3xxx.h" -#ifdef CONFIG_BRIDGE_DVFS +#ifdef CONFIG_TIDSPBRIDGE_DVFS #include "omap-pm.h" #endif @@ -35,7 +35,7 @@ static struct platform_device *omap_dsp_pdev; static struct omap_dsp_platform_data omap_dsp_pdata __initdata = { -#ifdef CONFIG_BRIDGE_DVFS +#ifdef CONFIG_TIDSPBRIDGE_DVFS .dsp_set_min_opp = omap_pm_dsp_set_min_opp, .dsp_get_opp = omap_pm_dsp_get_opp, .cpu_set_freq = omap_pm_cpu_set_freq, diff --git a/arch/arm/mach-omap2/dss-common.c b/arch/arm/mach-omap2/dss-common.c index 4be5cfc81ab8..393aeefaebb0 100644 --- a/arch/arm/mach-omap2/dss-common.c +++ b/arch/arm/mach-omap2/dss-common.c @@ -27,9 +27,7 @@ #include <linux/gpio.h> #include <video/omapdss.h> -#include <video/omap-panel-tfp410.h> -#include <video/omap-panel-nokia-dsi.h> -#include <video/omap-panel-picodlp.h> +#include <video/omap-panel-data.h> #include "soc.h" #include "dss-common.h" @@ -54,7 +52,6 @@ static struct omap_dss_device omap4_panda_dvi_device = { .driver_name = "tfp410", .data = &omap4_dvi_panel, .phy.dpi.data_lines = 24, - .reset_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO, .channel = OMAP_DSS_CHANNEL_LCD2, }; @@ -179,45 +176,12 @@ static struct picodlp_panel_data sdp4430_picodlp_pdata = { .pwrgood_gpio = 45, }; -static void sdp4430_picodlp_init(void) -{ - int r; - const struct gpio picodlp_gpios[] = { - {DLP_POWER_ON_GPIO, GPIOF_OUT_INIT_LOW, - "DLP POWER ON"}, - {sdp4430_picodlp_pdata.emu_done_gpio, GPIOF_IN, - "DLP EMU DONE"}, - {sdp4430_picodlp_pdata.pwrgood_gpio, GPIOF_OUT_INIT_LOW, - "DLP PWRGOOD"}, - }; - - r = gpio_request_array(picodlp_gpios, ARRAY_SIZE(picodlp_gpios)); - if (r) - pr_err("Cannot request PicoDLP GPIOs, error %d\n", r); -} - -static int sdp4430_panel_enable_picodlp(struct omap_dss_device *dssdev) -{ - gpio_set_value(DISPLAY_SEL_GPIO, 0); - gpio_set_value(DLP_POWER_ON_GPIO, 1); - - return 0; -} - -static void sdp4430_panel_disable_picodlp(struct omap_dss_device *dssdev) -{ - gpio_set_value(DLP_POWER_ON_GPIO, 0); - gpio_set_value(DISPLAY_SEL_GPIO, 1); -} - static struct omap_dss_device sdp4430_picodlp_device = { .name = "picodlp", .driver_name = "picodlp_panel", .type = OMAP_DISPLAY_TYPE_DPI, .phy.dpi.data_lines = 24, .channel = OMAP_DSS_CHANNEL_LCD2, - .platform_enable = sdp4430_panel_enable_picodlp, - .platform_disable = sdp4430_panel_disable_picodlp, .data = &sdp4430_picodlp_pdata, }; @@ -234,17 +198,26 @@ static struct omap_dss_board_info sdp4430_dss_data = { .default_device = &sdp4430_lcd_device, }; +/* + * we select LCD2 by default (instead of Pico DLP) by setting DISPLAY_SEL_GPIO. + * Setting DLP_POWER_ON gpio enables the VDLP_2V5 VDLP_1V8 and VDLP_1V0 rails + * used by picodlp on the 4430sdp platform. Keep this gpio disabled as LCD2 is + * selected by default + */ void __init omap_4430sdp_display_init(void) { int r; - /* Enable LCD2 by default (instead of Pico DLP) */ r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH, "display_sel"); if (r) pr_err("%s: Could not get display_sel GPIO\n", __func__); - sdp4430_picodlp_init(); + r = gpio_request_one(DLP_POWER_ON_GPIO, GPIOF_OUT_INIT_LOW, + "DLP POWER ON"); + if (r) + pr_err("%s: Could not get DLP POWER ON GPIO\n", __func__); + omap_display_init(&sdp4430_dss_data); /* * OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and @@ -264,12 +237,15 @@ void __init omap_4430sdp_display_init_of(void) { int r; - /* Enable LCD2 by default (instead of Pico DLP) */ r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH, "display_sel"); if (r) pr_err("%s: Could not get display_sel GPIO\n", __func__); - sdp4430_picodlp_init(); + r = gpio_request_one(DLP_POWER_ON_GPIO, GPIOF_OUT_INIT_LOW, + "DLP POWER ON"); + if (r) + pr_err("%s: Could not get DLP POWER ON GPIO\n", __func__); + omap_display_init(&sdp4430_dss_data); } diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c index afc1e8c32d6c..d9c27195caf0 100644 --- a/arch/arm/mach-omap2/gpmc-nand.c +++ b/arch/arm/mach-omap2/gpmc-nand.c @@ -74,14 +74,6 @@ static int omap2_nand_gpmc_retime( t.cs_wr_off = gpmc_t->cs_wr_off; t.wr_cycle = gpmc_t->wr_cycle; - /* Configure GPMC */ - if (gpmc_nand_data->devsize == NAND_BUSWIDTH_16) - gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_DEV_SIZE, 1); - else - gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_DEV_SIZE, 0); - gpmc_cs_configure(gpmc_nand_data->cs, - GPMC_CONFIG_DEV_TYPE, GPMC_DEVICETYPE_NAND); - gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_WP, 0); err = gpmc_cs_set_timings(gpmc_nand_data->cs, &t); if (err) return err; @@ -115,14 +107,18 @@ int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data, struct gpmc_timings *gpmc_t) { int err = 0; + struct gpmc_settings s; struct device *dev = &gpmc_nand_device.dev; + memset(&s, 0, sizeof(struct gpmc_settings)); + gpmc_nand_device.dev.platform_data = gpmc_nand_data; err = gpmc_cs_request(gpmc_nand_data->cs, NAND_IO_SIZE, (unsigned long *)&gpmc_nand_resource[0].start); if (err < 0) { - dev_err(dev, "Cannot request GPMC CS\n"); + dev_err(dev, "Cannot request GPMC CS %d, error %d\n", + gpmc_nand_data->cs, err); return err; } @@ -140,11 +136,31 @@ int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data, dev_err(dev, "Unable to set gpmc timings: %d\n", err); return err; } - } - /* Enable RD PIN Monitoring Reg */ - if (gpmc_nand_data->dev_ready) { - gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_RDY_BSY, 1); + if (gpmc_nand_data->of_node) { + gpmc_read_settings_dt(gpmc_nand_data->of_node, &s); + } else { + s.device_nand = true; + + /* Enable RD PIN Monitoring Reg */ + if (gpmc_nand_data->dev_ready) { + s.wait_on_read = true; + s.wait_on_write = true; + } + } + + if (gpmc_nand_data->devsize == NAND_BUSWIDTH_16) + s.device_width = GPMC_DEVWIDTH_16BIT; + else + s.device_width = GPMC_DEVWIDTH_8BIT; + + err = gpmc_cs_program_settings(gpmc_nand_data->cs, &s); + if (err < 0) + goto out_free_cs; + + err = gpmc_configure(GPMC_CONFIG_WP, 0); + if (err < 0) + goto out_free_cs; } gpmc_update_nand_reg(&gpmc_nand_data->reg, gpmc_nand_data->cs); diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c index fadd87435cd0..64b5a8346982 100644 --- a/arch/arm/mach-omap2/gpmc-onenand.c +++ b/arch/arm/mach-omap2/gpmc-onenand.c @@ -47,11 +47,23 @@ static struct platform_device gpmc_onenand_device = { .resource = &gpmc_onenand_resource, }; -static struct gpmc_timings omap2_onenand_calc_async_timings(void) +static struct gpmc_settings onenand_async = { + .device_width = GPMC_DEVWIDTH_16BIT, + .mux_add_data = GPMC_MUX_AD, +}; + +static struct gpmc_settings onenand_sync = { + .burst_read = true, + .burst_wrap = true, + .burst_len = GPMC_BURST_16, + .device_width = GPMC_DEVWIDTH_16BIT, + .mux_add_data = GPMC_MUX_AD, + .wait_pin = 0, +}; + +static void omap2_onenand_calc_async_timings(struct gpmc_timings *t) { struct gpmc_device_timings dev_t; - struct gpmc_timings t; - const int t_cer = 15; const int t_avdp = 12; const int t_aavdh = 7; @@ -64,7 +76,6 @@ static struct gpmc_timings omap2_onenand_calc_async_timings(void) memset(&dev_t, 0, sizeof(dev_t)); - dev_t.mux = true; dev_t.t_avdp_r = max_t(int, t_avdp, t_cer) * 1000; dev_t.t_avdp_w = dev_t.t_avdp_r; dev_t.t_aavdh = t_aavdh * 1000; @@ -76,19 +87,7 @@ static struct gpmc_timings omap2_onenand_calc_async_timings(void) dev_t.t_wpl = t_wpl * 1000; dev_t.t_wph = t_wph * 1000; - gpmc_calc_timings(&t, &dev_t); - - return t; -} - -static int gpmc_set_async_mode(int cs, struct gpmc_timings *t) -{ - /* Configure GPMC for asynchronous read */ - gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, - GPMC_CONFIG1_DEVICESIZE_16 | - GPMC_CONFIG1_MUXADDDATA); - - return gpmc_cs_set_timings(cs, t); + gpmc_calc_timings(t, &onenand_async, &dev_t); } static void omap2_onenand_set_async_mode(void __iomem *onenand_base) @@ -158,12 +157,11 @@ static int omap2_onenand_get_freq(struct omap_onenand_platform_data *cfg, return freq; } -static struct gpmc_timings -omap2_onenand_calc_sync_timings(struct omap_onenand_platform_data *cfg, - int freq) +static void omap2_onenand_calc_sync_timings(struct gpmc_timings *t, + unsigned int flags, + int freq) { struct gpmc_device_timings dev_t; - struct gpmc_timings t; const int t_cer = 15; const int t_avdp = 12; const int t_cez = 20; /* max of t_cez, t_oez */ @@ -172,9 +170,9 @@ omap2_onenand_calc_sync_timings(struct omap_onenand_platform_data *cfg, int min_gpmc_clk_period, t_ces, t_avds, t_avdh, t_ach, t_aavdh, t_rdyo; int div, gpmc_clk_ns; - if (cfg->flags & ONENAND_SYNC_READ) + if (flags & ONENAND_SYNC_READ) onenand_flags = ONENAND_FLAG_SYNCREAD; - else if (cfg->flags & ONENAND_SYNC_READWRITE) + else if (flags & ONENAND_SYNC_READWRITE) onenand_flags = ONENAND_FLAG_SYNCREAD | ONENAND_FLAG_SYNCWRITE; switch (freq) { @@ -239,10 +237,11 @@ omap2_onenand_calc_sync_timings(struct omap_onenand_platform_data *cfg, /* Set synchronous read timings */ memset(&dev_t, 0, sizeof(dev_t)); - dev_t.mux = true; - dev_t.sync_read = true; + if (onenand_flags & ONENAND_FLAG_SYNCREAD) + onenand_sync.sync_read = true; if (onenand_flags & ONENAND_FLAG_SYNCWRITE) { - dev_t.sync_write = true; + onenand_sync.sync_write = true; + onenand_sync.burst_write = true; } else { dev_t.t_avdp_w = max(t_avdp, t_cer) * 1000; dev_t.t_wpl = t_wpl * 1000; @@ -265,32 +264,7 @@ omap2_onenand_calc_sync_timings(struct omap_onenand_platform_data *cfg, dev_t.cyc_aavdh_oe = 1; dev_t.t_rdyo = t_rdyo * 1000 + min_gpmc_clk_period; - gpmc_calc_timings(&t, &dev_t); - - return t; -} - -static int gpmc_set_sync_mode(int cs, struct gpmc_timings *t) -{ - unsigned sync_read = onenand_flags & ONENAND_FLAG_SYNCREAD; - unsigned sync_write = onenand_flags & ONENAND_FLAG_SYNCWRITE; - - /* Configure GPMC for synchronous read */ - gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, - GPMC_CONFIG1_WRAPBURST_SUPP | - GPMC_CONFIG1_READMULTIPLE_SUPP | - (sync_read ? GPMC_CONFIG1_READTYPE_SYNC : 0) | - (sync_write ? GPMC_CONFIG1_WRITEMULTIPLE_SUPP : 0) | - (sync_write ? GPMC_CONFIG1_WRITETYPE_SYNC : 0) | - GPMC_CONFIG1_PAGE_LEN(2) | - (cpu_is_omap34xx() ? 0 : - (GPMC_CONFIG1_WAIT_READ_MON | - GPMC_CONFIG1_WAIT_PIN_SEL(0))) | - GPMC_CONFIG1_DEVICESIZE_16 | - GPMC_CONFIG1_DEVICETYPE_NOR | - GPMC_CONFIG1_MUXADDDATA); - - return gpmc_cs_set_timings(cs, t); + gpmc_calc_timings(t, &onenand_sync, &dev_t); } static int omap2_onenand_setup_async(void __iomem *onenand_base) @@ -298,12 +272,20 @@ static int omap2_onenand_setup_async(void __iomem *onenand_base) struct gpmc_timings t; int ret; + if (gpmc_onenand_data->of_node) + gpmc_read_settings_dt(gpmc_onenand_data->of_node, + &onenand_async); + omap2_onenand_set_async_mode(onenand_base); - t = omap2_onenand_calc_async_timings(); + omap2_onenand_calc_async_timings(&t); + + ret = gpmc_cs_program_settings(gpmc_onenand_data->cs, &onenand_async); + if (ret < 0) + return ret; - ret = gpmc_set_async_mode(gpmc_onenand_data->cs, &t); - if (IS_ERR_VALUE(ret)) + ret = gpmc_cs_set_timings(gpmc_onenand_data->cs, &t); + if (ret < 0) return ret; omap2_onenand_set_async_mode(onenand_base); @@ -322,10 +304,26 @@ static int omap2_onenand_setup_sync(void __iomem *onenand_base, int *freq_ptr) set_onenand_cfg(onenand_base); } - t = omap2_onenand_calc_sync_timings(gpmc_onenand_data, freq); + if (gpmc_onenand_data->of_node) { + gpmc_read_settings_dt(gpmc_onenand_data->of_node, + &onenand_sync); + } else { + /* + * FIXME: Appears to be legacy code from initial ONENAND commit. + * Unclear what boards this is for and if this can be removed. + */ + if (!cpu_is_omap34xx()) + onenand_sync.wait_on_read = true; + } + + omap2_onenand_calc_sync_timings(&t, gpmc_onenand_data->flags, freq); - ret = gpmc_set_sync_mode(gpmc_onenand_data->cs, &t); - if (IS_ERR_VALUE(ret)) + ret = gpmc_cs_program_settings(gpmc_onenand_data->cs, &onenand_sync); + if (ret < 0) + return ret; + + ret = gpmc_cs_set_timings(gpmc_onenand_data->cs, &t); + if (ret < 0) return ret; set_onenand_cfg(onenand_base); @@ -359,6 +357,7 @@ static int gpmc_onenand_setup(void __iomem *onenand_base, int *freq_ptr) void gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data) { int err; + struct device *dev = &gpmc_onenand_device.dev; gpmc_onenand_data = _onenand_data; gpmc_onenand_data->onenand_setup = gpmc_onenand_setup; @@ -366,7 +365,7 @@ void gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data) if (cpu_is_omap24xx() && (gpmc_onenand_data->flags & ONENAND_SYNC_READWRITE)) { - printk(KERN_ERR "Onenand using only SYNC_READ on 24xx\n"); + dev_warn(dev, "OneNAND using only SYNC_READ on 24xx\n"); gpmc_onenand_data->flags &= ~ONENAND_SYNC_READWRITE; gpmc_onenand_data->flags |= ONENAND_SYNC_READ; } @@ -379,7 +378,8 @@ void gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data) err = gpmc_cs_request(gpmc_onenand_data->cs, ONENAND_IO_SIZE, (unsigned long *)&gpmc_onenand_resource.start); if (err < 0) { - pr_err("%s: Cannot request GPMC CS\n", __func__); + dev_err(dev, "Cannot request GPMC CS %d, error %d\n", + gpmc_onenand_data->cs, err); return; } @@ -387,7 +387,7 @@ void gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data) ONENAND_IO_SIZE - 1; if (platform_device_register(&gpmc_onenand_device) < 0) { - pr_err("%s: Unable to register OneNAND device\n", __func__); + dev_err(dev, "Unable to register OneNAND device\n"); gpmc_cs_free(gpmc_onenand_data->cs); return; } diff --git a/arch/arm/mach-omap2/gpmc-smc91x.c b/arch/arm/mach-omap2/gpmc-smc91x.c index 11d0b756f098..61a063595e66 100644 --- a/arch/arm/mach-omap2/gpmc-smc91x.c +++ b/arch/arm/mach-omap2/gpmc-smc91x.c @@ -49,6 +49,10 @@ static struct platform_device gpmc_smc91x_device = { .resource = gpmc_smc91x_resources, }; +static struct gpmc_settings smc91x_settings = { + .device_width = GPMC_DEVWIDTH_16BIT, +}; + /* * Set the gpmc timings for smc91c96. The timings are taken * from the data sheet available at: @@ -67,18 +71,6 @@ static int smc91c96_gpmc_retime(void) const int t7 = 5; /* Figure 12.4 write */ const int t8 = 5; /* Figure 12.4 write */ const int t20 = 185; /* Figure 12.2 read and 12.4 write */ - u32 l; - - l = GPMC_CONFIG1_DEVICESIZE_16; - if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA) - l |= GPMC_CONFIG1_MUXADDDATA; - if (gpmc_cfg->flags & GPMC_READ_MON) - l |= GPMC_CONFIG1_WAIT_READ_MON; - if (gpmc_cfg->flags & GPMC_WRITE_MON) - l |= GPMC_CONFIG1_WAIT_WRITE_MON; - if (gpmc_cfg->wait_pin) - l |= GPMC_CONFIG1_WAIT_PIN_SEL(gpmc_cfg->wait_pin); - gpmc_cs_write_reg(gpmc_cfg->cs, GPMC_CS_CONFIG1, l); /* * FIXME: Calculate the address and data bus muxed timings. @@ -104,7 +96,7 @@ static int smc91c96_gpmc_retime(void) dev_t.t_cez_w = t4_w * 1000; dev_t.t_wr_cycle = (t20 - t3) * 1000; - gpmc_calc_timings(&t, &dev_t); + gpmc_calc_timings(&t, &smc91x_settings, &dev_t); return gpmc_cs_set_timings(gpmc_cfg->cs, &t); } @@ -133,6 +125,18 @@ void __init gpmc_smc91x_init(struct omap_smc91x_platform_data *board_data) gpmc_smc91x_resources[0].end = cs_mem_base + 0x30f; gpmc_smc91x_resources[1].flags |= (gpmc_cfg->flags & IRQF_TRIGGER_MASK); + if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA) + smc91x_settings.mux_add_data = GPMC_MUX_AD; + if (gpmc_cfg->flags & GPMC_READ_MON) + smc91x_settings.wait_on_read = true; + if (gpmc_cfg->flags & GPMC_WRITE_MON) + smc91x_settings.wait_on_write = true; + if (gpmc_cfg->wait_pin) + smc91x_settings.wait_pin = gpmc_cfg->wait_pin; + ret = gpmc_cs_program_settings(gpmc_cfg->cs, &smc91x_settings); + if (ret < 0) + goto free1; + if (gpmc_cfg->retime) { ret = gpmc_cfg->retime(); if (ret != 0) diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 410e1bac7815..ed946df5ad8a 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -26,6 +26,7 @@ #include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/of.h> +#include <linux/of_address.h> #include <linux/of_mtd.h> #include <linux/of_device.h> #include <linux/mtd/nand.h> @@ -91,9 +92,7 @@ #define GPMC_CS_SIZE 0x30 #define GPMC_BCH_SIZE 0x10 -#define GPMC_MEM_START 0x00000000 #define GPMC_MEM_END 0x3FFFFFFF -#define BOOT_ROM_SPACE 0x100000 /* 1MB */ #define GPMC_CHUNK_SHIFT 24 /* 16 MB */ #define GPMC_SECTION_SHIFT 28 /* 128 MB */ @@ -107,6 +106,9 @@ #define GPMC_HAS_WR_ACCESS 0x1 #define GPMC_HAS_WR_DATA_MUX_BUS 0x2 +#define GPMC_HAS_MUX_AAD 0x4 + +#define GPMC_NR_WAITPINS 4 /* XXX: Only NAND irq has been considered,currently these are the only ones used */ @@ -153,6 +155,7 @@ static struct resource gpmc_cs_mem[GPMC_CS_NUM]; static DEFINE_SPINLOCK(gpmc_mem_lock); /* Define chip-selects as reserved by default until probe completes */ static unsigned int gpmc_cs_map = ((1 << GPMC_CS_NUM) - 1); +static unsigned int gpmc_nr_waitpins; static struct device *gpmc_dev; static int gpmc_irq; static resource_size_t phys_base, mem_size; @@ -181,7 +184,7 @@ void gpmc_cs_write_reg(int cs, int idx, u32 val) __raw_writel(val, reg_addr); } -u32 gpmc_cs_read_reg(int cs, int idx) +static u32 gpmc_cs_read_reg(int cs, int idx) { void __iomem *reg_addr; @@ -190,7 +193,7 @@ u32 gpmc_cs_read_reg(int cs, int idx) } /* TODO: Add support for gpmc_fck to clock framework and use it */ -unsigned long gpmc_get_fclk_period(void) +static unsigned long gpmc_get_fclk_period(void) { unsigned long rate = clk_get_rate(gpmc_l3_clk); @@ -205,7 +208,7 @@ unsigned long gpmc_get_fclk_period(void) return rate; } -unsigned int gpmc_ns_to_ticks(unsigned int time_ns) +static unsigned int gpmc_ns_to_ticks(unsigned int time_ns) { unsigned long tick_ps; @@ -215,7 +218,7 @@ unsigned int gpmc_ns_to_ticks(unsigned int time_ns) return (time_ns * 1000 + tick_ps - 1) / tick_ps; } -unsigned int gpmc_ps_to_ticks(unsigned int time_ps) +static unsigned int gpmc_ps_to_ticks(unsigned int time_ps) { unsigned long tick_ps; @@ -230,13 +233,6 @@ unsigned int gpmc_ticks_to_ns(unsigned int ticks) return ticks * gpmc_get_fclk_period() / 1000; } -unsigned int gpmc_round_ns_to_ticks(unsigned int time_ns) -{ - unsigned long ticks = gpmc_ns_to_ticks(time_ns); - - return ticks * gpmc_get_fclk_period() / 1000; -} - static unsigned int gpmc_ticks_to_ps(unsigned int ticks) { return ticks * gpmc_get_fclk_period(); @@ -405,11 +401,18 @@ int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t) return 0; } -static void gpmc_cs_enable_mem(int cs, u32 base, u32 size) +static int gpmc_cs_enable_mem(int cs, u32 base, u32 size) { u32 l; u32 mask; + /* + * Ensure that base address is aligned on a + * boundary equal to or greater than size. + */ + if (base & (size - 1)) + return -EINVAL; + mask = (1 << GPMC_SECTION_SHIFT) - size; l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7); l &= ~0x3f; @@ -418,6 +421,8 @@ static void gpmc_cs_enable_mem(int cs, u32 base, u32 size) l |= ((mask >> GPMC_CHUNK_SHIFT) & 0x0f) << 8; l |= GPMC_CONFIG7_CSVALID; gpmc_cs_write_reg(cs, GPMC_CS_CONFIG7, l); + + return 0; } static void gpmc_cs_disable_mem(int cs) @@ -448,22 +453,14 @@ static int gpmc_cs_mem_enabled(int cs) return l & GPMC_CONFIG7_CSVALID; } -int gpmc_cs_set_reserved(int cs, int reserved) +static void gpmc_cs_set_reserved(int cs, int reserved) { - if (cs > GPMC_CS_NUM) - return -ENODEV; - gpmc_cs_map &= ~(1 << cs); gpmc_cs_map |= (reserved ? 1 : 0) << cs; - - return 0; } -int gpmc_cs_reserved(int cs) +static bool gpmc_cs_reserved(int cs) { - if (cs > GPMC_CS_NUM) - return -ENODEV; - return gpmc_cs_map & (1 << cs); } @@ -510,6 +507,39 @@ static int gpmc_cs_delete_mem(int cs) return r; } +/** + * gpmc_cs_remap - remaps a chip-select physical base address + * @cs: chip-select to remap + * @base: physical base address to re-map chip-select to + * + * Re-maps a chip-select to a new physical base address specified by + * "base". Returns 0 on success and appropriate negative error code + * on failure. + */ +static int gpmc_cs_remap(int cs, u32 base) +{ + int ret; + u32 old_base, size; + + if (cs > GPMC_CS_NUM) + return -ENODEV; + gpmc_cs_get_memconf(cs, &old_base, &size); + if (base == old_base) + return 0; + gpmc_cs_disable_mem(cs); + ret = gpmc_cs_delete_mem(cs); + if (ret < 0) + return ret; + ret = gpmc_cs_insert_mem(cs, base, size); + if (ret < 0) + return ret; + ret = gpmc_cs_enable_mem(cs, base, size); + if (ret < 0) + return ret; + + return 0; +} + int gpmc_cs_request(int cs, unsigned long size, unsigned long *base) { struct resource *res = &gpmc_cs_mem[cs]; @@ -535,7 +565,12 @@ int gpmc_cs_request(int cs, unsigned long size, unsigned long *base) if (r < 0) goto out; - gpmc_cs_enable_mem(cs, res->start, resource_size(res)); + r = gpmc_cs_enable_mem(cs, res->start, resource_size(res)); + if (r < 0) { + release_resource(res); + goto out; + } + *base = res->start; gpmc_cs_set_reserved(cs, 1); out: @@ -561,16 +596,14 @@ void gpmc_cs_free(int cs) EXPORT_SYMBOL(gpmc_cs_free); /** - * gpmc_cs_configure - write request to configure gpmc - * @cs: chip select number + * gpmc_configure - write request to configure gpmc * @cmd: command type * @wval: value to write * @return status of the operation */ -int gpmc_cs_configure(int cs, int cmd, int wval) +int gpmc_configure(int cmd, int wval) { - int err = 0; - u32 regval = 0; + u32 regval; switch (cmd) { case GPMC_ENABLE_IRQ: @@ -590,43 +623,14 @@ int gpmc_cs_configure(int cs, int cmd, int wval) gpmc_write_reg(GPMC_CONFIG, regval); break; - case GPMC_CONFIG_RDY_BSY: - regval = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); - if (wval) - regval |= WR_RD_PIN_MONITORING; - else - regval &= ~WR_RD_PIN_MONITORING; - gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval); - break; - - case GPMC_CONFIG_DEV_SIZE: - regval = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); - - /* clear 2 target bits */ - regval &= ~GPMC_CONFIG1_DEVICESIZE(3); - - /* set the proper value */ - regval |= GPMC_CONFIG1_DEVICESIZE(wval); - - gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval); - break; - - case GPMC_CONFIG_DEV_TYPE: - regval = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); - regval |= GPMC_CONFIG1_DEVICETYPE(wval); - if (wval == GPMC_DEVICETYPE_NOR) - regval |= GPMC_CONFIG1_MUXADDDATA; - gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval); - break; - default: - printk(KERN_ERR "gpmc_configure_cs: Not supported\n"); - err = -EINVAL; + pr_err("%s: command not supported\n", __func__); + return -EINVAL; } - return err; + return 0; } -EXPORT_SYMBOL(gpmc_cs_configure); +EXPORT_SYMBOL(gpmc_configure); void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs) { @@ -716,7 +720,7 @@ static int gpmc_setup_irq(void) return -EINVAL; gpmc_irq_start = irq_alloc_descs(-1, 0, GPMC_NR_IRQ, 0); - if (IS_ERR_VALUE(gpmc_irq_start)) { + if (gpmc_irq_start < 0) { pr_err("irq_alloc_descs failed\n"); return gpmc_irq_start; } @@ -781,16 +785,16 @@ static void gpmc_mem_exit(void) } -static int gpmc_mem_init(void) +static void gpmc_mem_init(void) { - int cs, rc; - unsigned long boot_rom_space = 0; + int cs; - /* never allocate the first page, to facilitate bug detection; - * even if we didn't boot from ROM. + /* + * The first 1MB of GPMC address space is typically mapped to + * the internal ROM. Never allocate the first page, to + * facilitate bug detection; even if we didn't boot from ROM. */ - boot_rom_space = BOOT_ROM_SPACE; - gpmc_mem_root.start = GPMC_MEM_START + boot_rom_space; + gpmc_mem_root.start = SZ_1M; gpmc_mem_root.end = GPMC_MEM_END; /* Reserve all regions that has been set up by bootloader */ @@ -800,16 +804,12 @@ static int gpmc_mem_init(void) if (!gpmc_cs_mem_enabled(cs)) continue; gpmc_cs_get_memconf(cs, &base, &size); - rc = gpmc_cs_insert_mem(cs, base, size); - if (IS_ERR_VALUE(rc)) { - while (--cs >= 0) - if (gpmc_cs_mem_enabled(cs)) - gpmc_cs_delete_mem(cs); - return rc; + if (gpmc_cs_insert_mem(cs, base, size)) { + pr_warn("%s: disabling cs %d mapped at 0x%x-0x%x\n", + __func__, cs, base, base + size); + gpmc_cs_disable_mem(cs); } } - - return 0; } static u32 gpmc_round_ps_to_sync_clk(u32 time_ps, u32 sync_clk) @@ -825,9 +825,9 @@ static u32 gpmc_round_ps_to_sync_clk(u32 time_ps, u32 sync_clk) /* XXX: can the cycles be avoided ? */ static int gpmc_calc_sync_read_timings(struct gpmc_timings *gpmc_t, - struct gpmc_device_timings *dev_t) + struct gpmc_device_timings *dev_t, + bool mux) { - bool mux = dev_t->mux; u32 temp; /* adv_rd_off */ @@ -880,9 +880,9 @@ static int gpmc_calc_sync_read_timings(struct gpmc_timings *gpmc_t, } static int gpmc_calc_sync_write_timings(struct gpmc_timings *gpmc_t, - struct gpmc_device_timings *dev_t) + struct gpmc_device_timings *dev_t, + bool mux) { - bool mux = dev_t->mux; u32 temp; /* adv_wr_off */ @@ -942,9 +942,9 @@ static int gpmc_calc_sync_write_timings(struct gpmc_timings *gpmc_t, } static int gpmc_calc_async_read_timings(struct gpmc_timings *gpmc_t, - struct gpmc_device_timings *dev_t) + struct gpmc_device_timings *dev_t, + bool mux) { - bool mux = dev_t->mux; u32 temp; /* adv_rd_off */ @@ -982,9 +982,9 @@ static int gpmc_calc_async_read_timings(struct gpmc_timings *gpmc_t, } static int gpmc_calc_async_write_timings(struct gpmc_timings *gpmc_t, - struct gpmc_device_timings *dev_t) + struct gpmc_device_timings *dev_t, + bool mux) { - bool mux = dev_t->mux; u32 temp; /* adv_wr_off */ @@ -1054,7 +1054,8 @@ static int gpmc_calc_sync_common_timings(struct gpmc_timings *gpmc_t, } static int gpmc_calc_common_timings(struct gpmc_timings *gpmc_t, - struct gpmc_device_timings *dev_t) + struct gpmc_device_timings *dev_t, + bool sync) { u32 temp; @@ -1068,7 +1069,7 @@ static int gpmc_calc_common_timings(struct gpmc_timings *gpmc_t, gpmc_t->cs_on + dev_t->t_ce_avd); gpmc_t->adv_on = gpmc_round_ps_to_ticks(temp); - if (dev_t->sync_write || dev_t->sync_read) + if (sync) gpmc_calc_sync_common_timings(gpmc_t, dev_t); return 0; @@ -1103,21 +1104,29 @@ static void gpmc_convert_ps_to_ns(struct gpmc_timings *t) } int gpmc_calc_timings(struct gpmc_timings *gpmc_t, - struct gpmc_device_timings *dev_t) + struct gpmc_settings *gpmc_s, + struct gpmc_device_timings *dev_t) { + bool mux = false, sync = false; + + if (gpmc_s) { + mux = gpmc_s->mux_add_data ? true : false; + sync = (gpmc_s->sync_read || gpmc_s->sync_write); + } + memset(gpmc_t, 0, sizeof(*gpmc_t)); - gpmc_calc_common_timings(gpmc_t, dev_t); + gpmc_calc_common_timings(gpmc_t, dev_t, sync); - if (dev_t->sync_read) - gpmc_calc_sync_read_timings(gpmc_t, dev_t); + if (gpmc_s && gpmc_s->sync_read) + gpmc_calc_sync_read_timings(gpmc_t, dev_t, mux); else - gpmc_calc_async_read_timings(gpmc_t, dev_t); + gpmc_calc_async_read_timings(gpmc_t, dev_t, mux); - if (dev_t->sync_write) - gpmc_calc_sync_write_timings(gpmc_t, dev_t); + if (gpmc_s && gpmc_s->sync_write) + gpmc_calc_sync_write_timings(gpmc_t, dev_t, mux); else - gpmc_calc_async_write_timings(gpmc_t, dev_t); + gpmc_calc_async_write_timings(gpmc_t, dev_t, mux); /* TODO: remove, see function definition */ gpmc_convert_ps_to_ns(gpmc_t); @@ -1125,6 +1134,90 @@ int gpmc_calc_timings(struct gpmc_timings *gpmc_t, return 0; } +/** + * gpmc_cs_program_settings - programs non-timing related settings + * @cs: GPMC chip-select to program + * @p: pointer to GPMC settings structure + * + * Programs non-timing related settings for a GPMC chip-select, such as + * bus-width, burst configuration, etc. Function should be called once + * for each chip-select that is being used and must be called before + * calling gpmc_cs_set_timings() as timing parameters in the CONFIG1 + * register will be initialised to zero by this function. Returns 0 on + * success and appropriate negative error code on failure. + */ +int gpmc_cs_program_settings(int cs, struct gpmc_settings *p) +{ + u32 config1; + + if ((!p->device_width) || (p->device_width > GPMC_DEVWIDTH_16BIT)) { + pr_err("%s: invalid width %d!", __func__, p->device_width); + return -EINVAL; + } + + /* Address-data multiplexing not supported for NAND devices */ + if (p->device_nand && p->mux_add_data) { + pr_err("%s: invalid configuration!\n", __func__); + return -EINVAL; + } + + if ((p->mux_add_data > GPMC_MUX_AD) || + ((p->mux_add_data == GPMC_MUX_AAD) && + !(gpmc_capability & GPMC_HAS_MUX_AAD))) { + pr_err("%s: invalid multiplex configuration!\n", __func__); + return -EINVAL; + } + + /* Page/burst mode supports lengths of 4, 8 and 16 bytes */ + if (p->burst_read || p->burst_write) { + switch (p->burst_len) { + case GPMC_BURST_4: + case GPMC_BURST_8: + case GPMC_BURST_16: + break; + default: + pr_err("%s: invalid page/burst-length (%d)\n", + __func__, p->burst_len); + return -EINVAL; + } + } + + if ((p->wait_on_read || p->wait_on_write) && + (p->wait_pin > gpmc_nr_waitpins)) { + pr_err("%s: invalid wait-pin (%d)\n", __func__, p->wait_pin); + return -EINVAL; + } + + config1 = GPMC_CONFIG1_DEVICESIZE((p->device_width - 1)); + + if (p->sync_read) + config1 |= GPMC_CONFIG1_READTYPE_SYNC; + if (p->sync_write) + config1 |= GPMC_CONFIG1_WRITETYPE_SYNC; + if (p->wait_on_read) + config1 |= GPMC_CONFIG1_WAIT_READ_MON; + if (p->wait_on_write) + config1 |= GPMC_CONFIG1_WAIT_WRITE_MON; + if (p->wait_on_read || p->wait_on_write) + config1 |= GPMC_CONFIG1_WAIT_PIN_SEL(p->wait_pin); + if (p->device_nand) + config1 |= GPMC_CONFIG1_DEVICETYPE(GPMC_DEVICETYPE_NAND); + if (p->mux_add_data) + config1 |= GPMC_CONFIG1_MUXTYPE(p->mux_add_data); + if (p->burst_read) + config1 |= GPMC_CONFIG1_READMULTIPLE_SUPP; + if (p->burst_write) + config1 |= GPMC_CONFIG1_WRITEMULTIPLE_SUPP; + if (p->burst_read || p->burst_write) { + config1 |= GPMC_CONFIG1_PAGE_LEN(p->burst_len >> 3); + config1 |= p->burst_wrap ? GPMC_CONFIG1_WRAPBURST_SUPP : 0; + } + + gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, config1); + + return 0; +} + #ifdef CONFIG_OF static struct of_device_id gpmc_dt_ids[] = { { .compatible = "ti,omap2420-gpmc" }, @@ -1136,70 +1229,110 @@ static struct of_device_id gpmc_dt_ids[] = { }; MODULE_DEVICE_TABLE(of, gpmc_dt_ids); +/** + * gpmc_read_settings_dt - read gpmc settings from device-tree + * @np: pointer to device-tree node for a gpmc child device + * @p: pointer to gpmc settings structure + * + * Reads the GPMC settings for a GPMC child device from device-tree and + * stores them in the GPMC settings structure passed. The GPMC settings + * structure is initialised to zero by this function and so any + * previously stored settings will be cleared. + */ +void gpmc_read_settings_dt(struct device_node *np, struct gpmc_settings *p) +{ + memset(p, 0, sizeof(struct gpmc_settings)); + + p->sync_read = of_property_read_bool(np, "gpmc,sync-read"); + p->sync_write = of_property_read_bool(np, "gpmc,sync-write"); + p->device_nand = of_property_read_bool(np, "gpmc,device-nand"); + of_property_read_u32(np, "gpmc,device-width", &p->device_width); + of_property_read_u32(np, "gpmc,mux-add-data", &p->mux_add_data); + + if (!of_property_read_u32(np, "gpmc,burst-length", &p->burst_len)) { + p->burst_wrap = of_property_read_bool(np, "gpmc,burst-wrap"); + p->burst_read = of_property_read_bool(np, "gpmc,burst-read"); + p->burst_write = of_property_read_bool(np, "gpmc,burst-write"); + if (!p->burst_read && !p->burst_write) + pr_warn("%s: page/burst-length set but not used!\n", + __func__); + } + + if (!of_property_read_u32(np, "gpmc,wait-pin", &p->wait_pin)) { + p->wait_on_read = of_property_read_bool(np, + "gpmc,wait-on-read"); + p->wait_on_write = of_property_read_bool(np, + "gpmc,wait-on-write"); + if (!p->wait_on_read && !p->wait_on_write) + pr_warn("%s: read/write wait monitoring not enabled!\n", + __func__); + } +} + static void __maybe_unused gpmc_read_timings_dt(struct device_node *np, struct gpmc_timings *gpmc_t) { - u32 val; + struct gpmc_bool_timings *p; + + if (!np || !gpmc_t) + return; memset(gpmc_t, 0, sizeof(*gpmc_t)); /* minimum clock period for syncronous mode */ - if (!of_property_read_u32(np, "gpmc,sync-clk", &val)) - gpmc_t->sync_clk = val; + of_property_read_u32(np, "gpmc,sync-clk-ps", &gpmc_t->sync_clk); /* chip select timtings */ - if (!of_property_read_u32(np, "gpmc,cs-on", &val)) - gpmc_t->cs_on = val; - - if (!of_property_read_u32(np, "gpmc,cs-rd-off", &val)) - gpmc_t->cs_rd_off = val; - - if (!of_property_read_u32(np, "gpmc,cs-wr-off", &val)) - gpmc_t->cs_wr_off = val; + of_property_read_u32(np, "gpmc,cs-on-ns", &gpmc_t->cs_on); + of_property_read_u32(np, "gpmc,cs-rd-off-ns", &gpmc_t->cs_rd_off); + of_property_read_u32(np, "gpmc,cs-wr-off-ns", &gpmc_t->cs_wr_off); /* ADV signal timings */ - if (!of_property_read_u32(np, "gpmc,adv-on", &val)) - gpmc_t->adv_on = val; - - if (!of_property_read_u32(np, "gpmc,adv-rd-off", &val)) - gpmc_t->adv_rd_off = val; - - if (!of_property_read_u32(np, "gpmc,adv-wr-off", &val)) - gpmc_t->adv_wr_off = val; + of_property_read_u32(np, "gpmc,adv-on-ns", &gpmc_t->adv_on); + of_property_read_u32(np, "gpmc,adv-rd-off-ns", &gpmc_t->adv_rd_off); + of_property_read_u32(np, "gpmc,adv-wr-off-ns", &gpmc_t->adv_wr_off); /* WE signal timings */ - if (!of_property_read_u32(np, "gpmc,we-on", &val)) - gpmc_t->we_on = val; - - if (!of_property_read_u32(np, "gpmc,we-off", &val)) - gpmc_t->we_off = val; + of_property_read_u32(np, "gpmc,we-on-ns", &gpmc_t->we_on); + of_property_read_u32(np, "gpmc,we-off-ns", &gpmc_t->we_off); /* OE signal timings */ - if (!of_property_read_u32(np, "gpmc,oe-on", &val)) - gpmc_t->oe_on = val; - - if (!of_property_read_u32(np, "gpmc,oe-off", &val)) - gpmc_t->oe_off = val; + of_property_read_u32(np, "gpmc,oe-on-ns", &gpmc_t->oe_on); + of_property_read_u32(np, "gpmc,oe-off-ns", &gpmc_t->oe_off); /* access and cycle timings */ - if (!of_property_read_u32(np, "gpmc,page-burst-access", &val)) - gpmc_t->page_burst_access = val; - - if (!of_property_read_u32(np, "gpmc,access", &val)) - gpmc_t->access = val; - - if (!of_property_read_u32(np, "gpmc,rd-cycle", &val)) - gpmc_t->rd_cycle = val; - - if (!of_property_read_u32(np, "gpmc,wr-cycle", &val)) - gpmc_t->wr_cycle = val; - - /* only for OMAP3430 */ - if (!of_property_read_u32(np, "gpmc,wr-access", &val)) - gpmc_t->wr_access = val; - - if (!of_property_read_u32(np, "gpmc,wr-data-mux-bus", &val)) - gpmc_t->wr_data_mux_bus = val; + of_property_read_u32(np, "gpmc,page-burst-access-ns", + &gpmc_t->page_burst_access); + of_property_read_u32(np, "gpmc,access-ns", &gpmc_t->access); + of_property_read_u32(np, "gpmc,rd-cycle-ns", &gpmc_t->rd_cycle); + of_property_read_u32(np, "gpmc,wr-cycle-ns", &gpmc_t->wr_cycle); + of_property_read_u32(np, "gpmc,bus-turnaround-ns", + &gpmc_t->bus_turnaround); + of_property_read_u32(np, "gpmc,cycle2cycle-delay-ns", + &gpmc_t->cycle2cycle_delay); + of_property_read_u32(np, "gpmc,wait-monitoring-ns", + &gpmc_t->wait_monitoring); + of_property_read_u32(np, "gpmc,clk-activation-ns", + &gpmc_t->clk_activation); + + /* only applicable to OMAP3+ */ + of_property_read_u32(np, "gpmc,wr-access-ns", &gpmc_t->wr_access); + of_property_read_u32(np, "gpmc,wr-data-mux-bus-ns", + &gpmc_t->wr_data_mux_bus); + + /* bool timing parameters */ + p = &gpmc_t->bool_timings; + + p->cycle2cyclediffcsen = + of_property_read_bool(np, "gpmc,cycle2cycle-diffcsen"); + p->cycle2cyclesamecsen = + of_property_read_bool(np, "gpmc,cycle2cycle-samecsen"); + p->we_extra_delay = of_property_read_bool(np, "gpmc,we-extra-delay"); + p->oe_extra_delay = of_property_read_bool(np, "gpmc,oe-extra-delay"); + p->adv_extra_delay = of_property_read_bool(np, "gpmc,adv-extra-delay"); + p->cs_extra_delay = of_property_read_bool(np, "gpmc,cs-extra-delay"); + p->time_para_granularity = + of_property_read_bool(np, "gpmc,time-para-granularity"); } #ifdef CONFIG_MTD_NAND @@ -1295,6 +1428,81 @@ static int gpmc_probe_onenand_child(struct platform_device *pdev, } #endif +/** + * gpmc_probe_generic_child - configures the gpmc for a child device + * @pdev: pointer to gpmc platform device + * @child: pointer to device-tree node for child device + * + * Allocates and configures a GPMC chip-select for a child device. + * Returns 0 on success and appropriate negative error code on failure. + */ +static int gpmc_probe_generic_child(struct platform_device *pdev, + struct device_node *child) +{ + struct gpmc_settings gpmc_s; + struct gpmc_timings gpmc_t; + struct resource res; + unsigned long base; + int ret, cs; + + if (of_property_read_u32(child, "reg", &cs) < 0) { + dev_err(&pdev->dev, "%s has no 'reg' property\n", + child->full_name); + return -ENODEV; + } + + if (of_address_to_resource(child, 0, &res) < 0) { + dev_err(&pdev->dev, "%s has malformed 'reg' property\n", + child->full_name); + return -ENODEV; + } + + ret = gpmc_cs_request(cs, resource_size(&res), &base); + if (ret < 0) { + dev_err(&pdev->dev, "cannot request GPMC CS %d\n", cs); + return ret; + } + + /* + * FIXME: gpmc_cs_request() will map the CS to an arbitary + * location in the gpmc address space. When booting with + * device-tree we want the NOR flash to be mapped to the + * location specified in the device-tree blob. So remap the + * CS to this location. Once DT migration is complete should + * just make gpmc_cs_request() map a specific address. + */ + ret = gpmc_cs_remap(cs, res.start); + if (ret < 0) { + dev_err(&pdev->dev, "cannot remap GPMC CS %d to 0x%x\n", + cs, res.start); + goto err; + } + + gpmc_read_settings_dt(child, &gpmc_s); + + ret = of_property_read_u32(child, "bank-width", &gpmc_s.device_width); + if (ret < 0) + goto err; + + ret = gpmc_cs_program_settings(cs, &gpmc_s); + if (ret < 0) + goto err; + + gpmc_read_timings_dt(child, &gpmc_t); + gpmc_cs_set_timings(cs, &gpmc_t); + + if (of_platform_device_create(child, NULL, &pdev->dev)) + return 0; + + dev_err(&pdev->dev, "failed to create gpmc child %s\n", child->name); + ret = -ENODEV; + +err: + gpmc_cs_free(cs); + + return ret; +} + static int gpmc_probe_dt(struct platform_device *pdev) { int ret; @@ -1305,6 +1513,13 @@ static int gpmc_probe_dt(struct platform_device *pdev) if (!of_id) return 0; + ret = of_property_read_u32(pdev->dev.of_node, "gpmc,num-waitpins", + &gpmc_nr_waitpins); + if (ret < 0) { + pr_err("%s: number of wait pins not found!\n", __func__); + return ret; + } + for_each_node_by_name(child, "nand") { ret = gpmc_probe_nand_child(pdev, child); if (ret < 0) { @@ -1320,6 +1535,23 @@ static int gpmc_probe_dt(struct platform_device *pdev) return ret; } } + + for_each_node_by_name(child, "nor") { + ret = gpmc_probe_generic_child(pdev, child); + if (ret < 0) { + of_node_put(child); + return ret; + } + } + + for_each_node_by_name(child, "ethernet") { + ret = gpmc_probe_generic_child(pdev, child); + if (ret < 0) { + of_node_put(child); + return ret; + } + } + return 0; } #else @@ -1364,25 +1596,37 @@ static int gpmc_probe(struct platform_device *pdev) gpmc_dev = &pdev->dev; l = gpmc_read_reg(GPMC_REVISION); + + /* + * FIXME: Once device-tree migration is complete the below flags + * should be populated based upon the device-tree compatible + * string. For now just use the IP revision. OMAP3+ devices have + * the wr_access and wr_data_mux_bus register fields. OMAP4+ + * devices support the addr-addr-data multiplex protocol. + * + * GPMC IP revisions: + * - OMAP24xx = 2.0 + * - OMAP3xxx = 5.0 + * - OMAP44xx/54xx/AM335x = 6.0 + */ if (GPMC_REVISION_MAJOR(l) > 0x4) gpmc_capability = GPMC_HAS_WR_ACCESS | GPMC_HAS_WR_DATA_MUX_BUS; + if (GPMC_REVISION_MAJOR(l) > 0x5) + gpmc_capability |= GPMC_HAS_MUX_AAD; dev_info(gpmc_dev, "GPMC revision %d.%d\n", GPMC_REVISION_MAJOR(l), GPMC_REVISION_MINOR(l)); - rc = gpmc_mem_init(); - if (IS_ERR_VALUE(rc)) { - clk_disable_unprepare(gpmc_l3_clk); - clk_put(gpmc_l3_clk); - dev_err(gpmc_dev, "failed to reserve memory\n"); - return rc; - } + gpmc_mem_init(); - if (IS_ERR_VALUE(gpmc_setup_irq())) + if (gpmc_setup_irq() < 0) dev_warn(gpmc_dev, "gpmc_setup_irq failed\n"); /* Now the GPMC is initialised, unreserve the chip-selects */ gpmc_cs_map = 0; + if (!pdev->dev.of_node) + gpmc_nr_waitpins = GPMC_NR_WAITPINS; + rc = gpmc_probe_dt(pdev); if (rc < 0) { clk_disable_unprepare(gpmc_l3_clk); diff --git a/arch/arm/mach-omap2/gpmc.h b/arch/arm/mach-omap2/gpmc.h index fe0a844d5007..707f6d58edd5 100644 --- a/arch/arm/mach-omap2/gpmc.h +++ b/arch/arm/mach-omap2/gpmc.h @@ -58,7 +58,7 @@ #define GPMC_CONFIG1_DEVICESIZE_16 GPMC_CONFIG1_DEVICESIZE(1) #define GPMC_CONFIG1_DEVICETYPE(val) ((val & 3) << 10) #define GPMC_CONFIG1_DEVICETYPE_NOR GPMC_CONFIG1_DEVICETYPE(0) -#define GPMC_CONFIG1_MUXADDDATA (1 << 9) +#define GPMC_CONFIG1_MUXTYPE(val) ((val & 3) << 8) #define GPMC_CONFIG1_TIME_PARA_GRAN (1 << 4) #define GPMC_CONFIG1_FCLK_DIV(val) (val & 3) #define GPMC_CONFIG1_FCLK_DIV2 (GPMC_CONFIG1_FCLK_DIV(1)) @@ -73,6 +73,13 @@ #define GPMC_IRQ_FIFOEVENTENABLE 0x01 #define GPMC_IRQ_COUNT_EVENT 0x02 +#define GPMC_BURST_4 4 /* 4 word burst */ +#define GPMC_BURST_8 8 /* 8 word burst */ +#define GPMC_BURST_16 16 /* 16 word burst */ +#define GPMC_DEVWIDTH_8BIT 1 /* 8-bit device width */ +#define GPMC_DEVWIDTH_16BIT 2 /* 16-bit device width */ +#define GPMC_MUX_AAD 1 /* Addr-Addr-Data multiplex */ +#define GPMC_MUX_AD 2 /* Addr-Data multiplex */ /* bool type time settings */ struct gpmc_bool_timings { @@ -178,10 +185,6 @@ struct gpmc_device_timings { u8 cyc_wpl; /* write deassertion time in cycles */ u32 cyc_iaa; /* initial access time in cycles */ - bool mux; /* address & data muxed */ - bool sync_write;/* synchronous write */ - bool sync_read; /* synchronous read */ - /* extra delays */ bool ce_xdelay; bool avd_xdelay; @@ -189,28 +192,40 @@ struct gpmc_device_timings { bool we_xdelay; }; +struct gpmc_settings { + bool burst_wrap; /* enables wrap bursting */ + bool burst_read; /* enables read page/burst mode */ + bool burst_write; /* enables write page/burst mode */ + bool device_nand; /* device is NAND */ + bool sync_read; /* enables synchronous reads */ + bool sync_write; /* enables synchronous writes */ + bool wait_on_read; /* monitor wait on reads */ + bool wait_on_write; /* monitor wait on writes */ + u32 burst_len; /* page/burst length */ + u32 device_width; /* device bus width (8 or 16 bit) */ + u32 mux_add_data; /* multiplex address & data */ + u32 wait_pin; /* wait-pin to be used */ +}; + extern int gpmc_calc_timings(struct gpmc_timings *gpmc_t, - struct gpmc_device_timings *dev_t); + struct gpmc_settings *gpmc_s, + struct gpmc_device_timings *dev_t); extern void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs); extern int gpmc_get_client_irq(unsigned irq_config); -extern unsigned int gpmc_ns_to_ticks(unsigned int time_ns); -extern unsigned int gpmc_ps_to_ticks(unsigned int time_ps); extern unsigned int gpmc_ticks_to_ns(unsigned int ticks); -extern unsigned int gpmc_round_ns_to_ticks(unsigned int time_ns); -extern unsigned long gpmc_get_fclk_period(void); extern void gpmc_cs_write_reg(int cs, int idx, u32 val); -extern u32 gpmc_cs_read_reg(int cs, int idx); extern int gpmc_calc_divider(unsigned int sync_clk); extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t); +extern int gpmc_cs_program_settings(int cs, struct gpmc_settings *p); extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base); extern void gpmc_cs_free(int cs); -extern int gpmc_cs_set_reserved(int cs, int reserved); -extern int gpmc_cs_reserved(int cs); extern void omap3_gpmc_save_context(void); extern void omap3_gpmc_restore_context(void); -extern int gpmc_cs_configure(int cs, int cmd, int wval); +extern int gpmc_configure(int cmd, int wval); +extern void gpmc_read_settings_dt(struct device_node *np, + struct gpmc_settings *p); #endif diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 8a68f1ec66b9..0f4c18e6e60c 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -18,6 +18,11 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/io.h> +#include <linux/slab.h> + +#ifdef CONFIG_SOC_BUS +#include <linux/sys_soc.h> +#endif #include <asm/cputype.h> @@ -31,8 +36,11 @@ #define OMAP4_SILICON_TYPE_STANDARD 0x01 #define OMAP4_SILICON_TYPE_PERFORMANCE 0x02 +#define OMAP_SOC_MAX_NAME_LENGTH 16 + static unsigned int omap_revision; -static const char *cpu_rev; +static char soc_name[OMAP_SOC_MAX_NAME_LENGTH]; +static char soc_rev[OMAP_SOC_MAX_NAME_LENGTH]; u32 omap_features; unsigned int omap_rev(void) @@ -169,9 +177,12 @@ void __init omap2xxx_check_revision(void) j = i; } - pr_info("OMAP%04x", omap_rev() >> 16); + sprintf(soc_name, "OMAP%04x", omap_rev() >> 16); + sprintf(soc_rev, "ES%x", (omap_rev() >> 12) & 0xf); + + pr_info("%s", soc_name); if ((omap_rev() >> 8) & 0x0f) - pr_info("ES%x", (omap_rev() >> 12) & 0xf); + pr_info("%s", soc_rev); pr_info("\n"); } @@ -211,8 +222,10 @@ static void __init omap3_cpuinfo(void) cpu_name = "OMAP3503"; } + sprintf(soc_name, "%s", cpu_name); + /* Print verbose information */ - pr_info("%s ES%s (", cpu_name, cpu_rev); + pr_info("%s %s (", soc_name, soc_rev); OMAP3_SHOW_FEATURE(l2cache); OMAP3_SHOW_FEATURE(iva); @@ -291,6 +304,7 @@ void __init ti81xx_check_features(void) void __init omap3xxx_check_revision(void) { + const char *cpu_rev; u32 cpuid, idcode; u16 hawkeye; u8 rev; @@ -300,7 +314,7 @@ void __init omap3xxx_check_revision(void) * If the processor type is Cortex-A8 and the revision is 0x0 * it means its Cortex r0p0 which is 3430 ES1.0. */ - cpuid = read_cpuid(CPUID_ID); + cpuid = read_cpuid_id(); if ((((cpuid >> 4) & 0xfff) == 0xc08) && ((cpuid & 0xf) == 0x0)) { omap_revision = OMAP3430_REV_ES1_0; cpu_rev = "1.0"; @@ -438,6 +452,7 @@ void __init omap3xxx_check_revision(void) cpu_rev = "1.2"; pr_warn("Warning: unknown chip type; assuming OMAP3630ES1.2\n"); } + sprintf(soc_rev, "ES%s", cpu_rev); } void __init omap4xxx_check_revision(void) @@ -460,7 +475,7 @@ void __init omap4xxx_check_revision(void) * Use ARM register to detect the correct ES version */ if (!rev && (hawkeye != 0xb94e) && (hawkeye != 0xb975)) { - idcode = read_cpuid(CPUID_ID); + idcode = read_cpuid_id(); rev = (idcode & 0xf) - 1; } @@ -512,8 +527,10 @@ void __init omap4xxx_check_revision(void) omap_revision = OMAP4430_REV_ES2_3; } - pr_info("OMAP%04x ES%d.%d\n", omap_rev() >> 16, - ((omap_rev() >> 12) & 0xf), ((omap_rev() >> 8) & 0xf)); + sprintf(soc_name, "OMAP%04x", omap_rev() >> 16); + sprintf(soc_rev, "ES%d.%d", (omap_rev() >> 12) & 0xf, + (omap_rev() >> 8) & 0xf); + pr_info("%s %s\n", soc_name, soc_rev); } void __init omap5xxx_check_revision(void) @@ -529,26 +546,34 @@ void __init omap5xxx_check_revision(void) case 0xb942: switch (rev) { case 0: - default: omap_revision = OMAP5430_REV_ES1_0; + break; + case 1: + default: + omap_revision = OMAP5430_REV_ES2_0; } break; case 0xb998: switch (rev) { case 0: - default: omap_revision = OMAP5432_REV_ES1_0; + break; + case 1: + default: + omap_revision = OMAP5432_REV_ES2_0; } break; default: /* Unknown default to latest silicon rev as default*/ - omap_revision = OMAP5430_REV_ES1_0; + omap_revision = OMAP5430_REV_ES2_0; } - pr_info("OMAP%04x ES%d.0\n", - omap_rev() >> 16, ((omap_rev() >> 12) & 0xf)); + sprintf(soc_name, "OMAP%04x", omap_rev() >> 16); + sprintf(soc_rev, "ES%d.0", (omap_rev() >> 12) & 0xf); + + pr_info("%s %s\n", soc_name, soc_rev); } /* @@ -569,3 +594,63 @@ void __init omap2_set_globals_tap(u32 class, void __iomem *tap) else tap_prod_id = 0x0208; } + +#ifdef CONFIG_SOC_BUS + +static const char const *omap_types[] = { + [OMAP2_DEVICE_TYPE_TEST] = "TST", + [OMAP2_DEVICE_TYPE_EMU] = "EMU", + [OMAP2_DEVICE_TYPE_SEC] = "HS", + [OMAP2_DEVICE_TYPE_GP] = "GP", + [OMAP2_DEVICE_TYPE_BAD] = "BAD", +}; + +static const char * __init omap_get_family(void) +{ + if (cpu_is_omap24xx()) + return kasprintf(GFP_KERNEL, "OMAP2"); + else if (cpu_is_omap34xx()) + return kasprintf(GFP_KERNEL, "OMAP3"); + else if (cpu_is_omap44xx()) + return kasprintf(GFP_KERNEL, "OMAP4"); + else if (soc_is_omap54xx()) + return kasprintf(GFP_KERNEL, "OMAP5"); + else + return kasprintf(GFP_KERNEL, "Unknown"); +} + +static ssize_t omap_get_type(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + return sprintf(buf, "%s\n", omap_types[omap_type()]); +} + +static struct device_attribute omap_soc_attr = + __ATTR(type, S_IRUGO, omap_get_type, NULL); + +void __init omap_soc_device_init(void) +{ + struct device *parent; + struct soc_device *soc_dev; + struct soc_device_attribute *soc_dev_attr; + + soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); + if (!soc_dev_attr) + return; + + soc_dev_attr->machine = soc_name; + soc_dev_attr->family = omap_get_family(); + soc_dev_attr->revision = soc_rev; + + soc_dev = soc_device_register(soc_dev_attr); + if (IS_ERR_OR_NULL(soc_dev)) { + kfree(soc_dev_attr); + return; + } + + parent = soc_device_to_device(soc_dev); + if (!IS_ERR_OR_NULL(parent)) + device_create_file(parent, &omap_soc_attr); +} +#endif /* CONFIG_SOC_BUS */ diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 5c445ca1e271..09abf99e9e57 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -277,6 +277,14 @@ static struct map_desc omap54xx_io_desc[] __initdata = { .length = L4_PER_54XX_SIZE, .type = MT_DEVICE, }, +#ifdef CONFIG_OMAP4_ERRATA_I688 + { + .virtual = OMAP4_SRAM_VA, + .pfn = __phys_to_pfn(OMAP4_SRAM_PA), + .length = PAGE_SIZE, + .type = MT_MEMORY_SO, + }, +#endif }; #endif @@ -329,6 +337,7 @@ void __init omap4_map_io(void) void __init omap5_map_io(void) { iotable_init(omap54xx_io_desc, ARRAY_SIZE(omap54xx_io_desc)); + omap_barriers_init(); } #endif /* @@ -385,6 +394,13 @@ static void __init omap_hwmod_init_postsetup(void) omap_pm_if_early_init(); } +static void __init omap_common_late_init(void) +{ + omap_mux_late_init(); + omap2_common_pm_late_init(); + omap_soc_device_init(); +} + #ifdef CONFIG_SOC_OMAP2420 void __init omap2420_init_early(void) { @@ -408,8 +424,7 @@ void __init omap2420_init_early(void) void __init omap2420_init_late(void) { - omap_mux_late_init(); - omap2_common_pm_late_init(); + omap_common_late_init(); omap2_pm_init(); omap2_clk_enable_autoidle_all(); } @@ -438,8 +453,7 @@ void __init omap2430_init_early(void) void __init omap2430_init_late(void) { - omap_mux_late_init(); - omap2_common_pm_late_init(); + omap_common_late_init(); omap2_pm_init(); omap2_clk_enable_autoidle_all(); } @@ -511,48 +525,42 @@ void __init ti81xx_init_early(void) void __init omap3_init_late(void) { - omap_mux_late_init(); - omap2_common_pm_late_init(); + omap_common_late_init(); omap3_pm_init(); omap2_clk_enable_autoidle_all(); } void __init omap3430_init_late(void) { - omap_mux_late_init(); - omap2_common_pm_late_init(); + omap_common_late_init(); omap3_pm_init(); omap2_clk_enable_autoidle_all(); } void __init omap35xx_init_late(void) { - omap_mux_late_init(); - omap2_common_pm_late_init(); + omap_common_late_init(); omap3_pm_init(); omap2_clk_enable_autoidle_all(); } void __init omap3630_init_late(void) { - omap_mux_late_init(); - omap2_common_pm_late_init(); + omap_common_late_init(); omap3_pm_init(); omap2_clk_enable_autoidle_all(); } void __init am35xx_init_late(void) { - omap_mux_late_init(); - omap2_common_pm_late_init(); + omap_common_late_init(); omap3_pm_init(); omap2_clk_enable_autoidle_all(); } void __init ti81xx_init_late(void) { - omap_mux_late_init(); - omap2_common_pm_late_init(); + omap_common_late_init(); omap3_pm_init(); omap2_clk_enable_autoidle_all(); } @@ -604,8 +612,7 @@ void __init omap4430_init_early(void) void __init omap4430_init_late(void) { - omap_mux_late_init(); - omap2_common_pm_late_init(); + omap_common_late_init(); omap4_pm_init(); omap2_clk_enable_autoidle_all(); } diff --git a/arch/arm/mach-omap2/omap-hotplug.c b/arch/arm/mach-omap2/omap-hotplug.c index e712d1725a8b..458f72f9dc8f 100644 --- a/arch/arm/mach-omap2/omap-hotplug.c +++ b/arch/arm/mach-omap2/omap-hotplug.c @@ -19,11 +19,8 @@ #include <linux/smp.h> #include <linux/io.h> -#include <asm/cacheflush.h> #include "omap-wakeupgen.h" - #include "common.h" - #include "powerdomain.h" /* @@ -35,9 +32,6 @@ void __ref omap4_cpu_die(unsigned int cpu) unsigned int boot_cpu = 0; void __iomem *base = omap_get_wakeupgen_base(); - flush_cache_all(); - dsb(); - /* * we're ready for shutdown now, so do it */ diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c index 8bcb64bcdcdb..e80327b6c81f 100644 --- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c +++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c @@ -139,20 +139,6 @@ static inline void cpu_clear_prev_logic_pwrst(unsigned int cpu_id) } } -/** - * omap4_mpuss_read_prev_context_state: - * Function returns the MPUSS previous context state - */ -u32 omap4_mpuss_read_prev_context_state(void) -{ - u32 reg; - - reg = omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION, - OMAP4430_PRM_MPU_INST, OMAP4_RM_MPU_MPU_CONTEXT_OFFSET); - reg &= OMAP4430_LOSTCONTEXT_DFF_MASK; - return reg; -} - /* * Store the CPU cluster state for L2X0 low power operations. */ diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index d9727218dd0a..2a551f997aea 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -21,7 +21,6 @@ #include <linux/io.h> #include <linux/irqchip/arm-gic.h> -#include <asm/cacheflush.h> #include <asm/smp_scu.h> #include "omap-secure.h" @@ -67,13 +66,6 @@ static void __cpuinit omap4_secondary_init(unsigned int cpu) 4, 0, 0, 0, 0, 0); /* - * If any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); - - /* * Synchronise with the boot thread. */ spin_lock(&boot_lock); @@ -84,6 +76,7 @@ static int __cpuinit omap4_boot_secondary(unsigned int cpu, struct task_struct * { static struct clockdomain *cpu1_clkdm; static bool booted; + static struct powerdomain *cpu1_pwrdm; void __iomem *base = omap_get_wakeupgen_base(); /* @@ -103,11 +96,10 @@ static int __cpuinit omap4_boot_secondary(unsigned int cpu, struct task_struct * else __raw_writel(0x20, base + OMAP_AUX_CORE_BOOT_0); - flush_cache_all(); - smp_wmb(); - - if (!cpu1_clkdm) + if (!cpu1_clkdm && !cpu1_pwrdm) { cpu1_clkdm = clkdm_lookup("mpu1_clkdm"); + cpu1_pwrdm = pwrdm_lookup("cpu1_pwrdm"); + } /* * The SGI(Software Generated Interrupts) are not wakeup capable @@ -120,7 +112,7 @@ static int __cpuinit omap4_boot_secondary(unsigned int cpu, struct task_struct * * Section : * 4.3.4.2 Power States of CPU0 and CPU1 */ - if (booted) { + if (booted && cpu1_pwrdm && cpu1_clkdm) { /* * GIC distributor control register has changed between * CortexA9 r1pX and r2pX. The Control Register secure @@ -141,7 +133,12 @@ static int __cpuinit omap4_boot_secondary(unsigned int cpu, struct task_struct * gic_dist_disable(); } + /* + * Ensure that CPU power state is set to ON to avoid CPU + * powerdomain transition on wfi + */ clkdm_wakeup(cpu1_clkdm); + omap_set_pwrdm_state(cpu1_pwrdm, PWRDM_POWER_ON); clkdm_allow_idle(cpu1_clkdm); if (IS_PM44XX_ERRATUM(PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD)) { @@ -168,38 +165,6 @@ static int __cpuinit omap4_boot_secondary(unsigned int cpu, struct task_struct * return 0; } -static void __init wakeup_secondary(void) -{ - void *startup_addr = omap_secondary_startup; - void __iomem *base = omap_get_wakeupgen_base(); - - if (cpu_is_omap446x()) { - startup_addr = omap_secondary_startup_4460; - pm44xx_errata |= PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD; - } - - /* - * Write the address of secondary startup routine into the - * AuxCoreBoot1 where ROM code will jump and start executing - * on secondary core once out of WFE - * A barrier is added to ensure that write buffer is drained - */ - if (omap_secure_apis_support()) - omap_auxcoreboot_addr(virt_to_phys(startup_addr)); - else - __raw_writel(virt_to_phys(omap5_secondary_startup), - base + OMAP_AUX_CORE_BOOT_1); - - smp_wmb(); - - /* - * Send a 'sev' to wake the secondary core from WFE. - * Drain the outstanding writes to memory - */ - dsb_sev(); - mb(); -} - /* * Initialise the CPU possible map early - this describes the CPUs * which may be present or become present in the system. @@ -209,7 +174,7 @@ static void __init omap4_smp_init_cpus(void) unsigned int i = 0, ncores = 1, cpu_id; /* Use ARM cpuid check here, as SoC detection will not work so early */ - cpu_id = read_cpuid(CPUID_ID) & CPU_MASK; + cpu_id = read_cpuid_id() & CPU_MASK; if (cpu_id == CPU_CORTEX_A9) { /* * Currently we can't call ioremap here because @@ -235,6 +200,8 @@ static void __init omap4_smp_init_cpus(void) static void __init omap4_smp_prepare_cpus(unsigned int max_cpus) { + void *startup_addr = omap_secondary_startup; + void __iomem *base = omap_get_wakeupgen_base(); /* * Initialise the SCU and wake up the secondary core using @@ -242,7 +209,24 @@ static void __init omap4_smp_prepare_cpus(unsigned int max_cpus) */ if (scu_base) scu_enable(scu_base); - wakeup_secondary(); + + if (cpu_is_omap446x()) { + startup_addr = omap_secondary_startup_4460; + pm44xx_errata |= PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD; + } + + /* + * Write the address of secondary startup routine into the + * AuxCoreBoot1 where ROM code will jump and start executing + * on secondary core once out of WFE + * A barrier is added to ensure that write buffer is drained + */ + if (omap_secure_apis_support()) + omap_auxcoreboot_addr(virt_to_phys(startup_addr)); + else + __raw_writel(virt_to_phys(omap5_secondary_startup), + base + OMAP_AUX_CORE_BOOT_1); + } struct smp_operations omap4_smp_ops __initdata = { diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index 708bb115a27f..13b27ffaf45e 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -22,6 +22,7 @@ #include <linux/of_platform.h> #include <linux/export.h> #include <linux/irqchip/arm-gic.h> +#include <linux/of_address.h> #include <asm/hardware/cache-l2x0.h> #include <asm/mach/map.h> @@ -240,15 +241,21 @@ void __iomem *omap4_get_sar_ram_base(void) */ static int __init omap4_sar_ram_init(void) { + unsigned long sar_base; + /* * To avoid code running on other OMAPs in * multi-omap builds */ - if (!cpu_is_omap44xx()) + if (cpu_is_omap44xx()) + sar_base = OMAP44XX_SAR_RAM_BASE; + else if (soc_is_omap54xx()) + sar_base = OMAP54XX_SAR_RAM_BASE; + else return -ENOMEM; /* Static mapping, never released */ - sar_ram_base = ioremap(OMAP44XX_SAR_RAM_BASE, SZ_16K); + sar_ram_base = ioremap(sar_base, SZ_16K); if (WARN_ON(!sar_ram_base)) return -ENOMEM; @@ -258,6 +265,21 @@ omap_early_initcall(omap4_sar_ram_init); void __init omap_gic_of_init(void) { + struct device_node *np; + + /* Extract GIC distributor and TWD bases for OMAP4460 ROM Errata WA */ + if (!cpu_is_omap446x()) + goto skip_errata_init; + + np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-gic"); + gic_dist_base_addr = of_iomap(np, 0); + WARN_ON(!gic_dist_base_addr); + + np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-twd-timer"); + twd_base = of_iomap(np, 0); + WARN_ON(!twd_base); + +skip_errata_init: omap_wakeupgen_init(); irqchip_init(); } diff --git a/arch/arm/mach-omap2/omap4-sar-layout.h b/arch/arm/mach-omap2/omap4-sar-layout.h index e170fe803b04..792b1069f724 100644 --- a/arch/arm/mach-omap2/omap4-sar-layout.h +++ b/arch/arm/mach-omap2/omap4-sar-layout.h @@ -20,13 +20,13 @@ #define SAR_BANK4_OFFSET 0x3000 /* Scratch pad memory offsets from SAR_BANK1 */ -#define SCU_OFFSET0 0xd00 -#define SCU_OFFSET1 0xd04 -#define OMAP_TYPE_OFFSET 0xd10 -#define L2X0_SAVE_OFFSET0 0xd14 -#define L2X0_SAVE_OFFSET1 0xd18 -#define L2X0_AUXCTRL_OFFSET 0xd1c -#define L2X0_PREFETCH_CTRL_OFFSET 0xd20 +#define SCU_OFFSET0 0xfe4 +#define SCU_OFFSET1 0xfe8 +#define OMAP_TYPE_OFFSET 0xfec +#define L2X0_SAVE_OFFSET0 0xff0 +#define L2X0_SAVE_OFFSET1 0xff4 +#define L2X0_AUXCTRL_OFFSET 0xff8 +#define L2X0_PREFETCH_CTRL_OFFSET 0xffc /* CPUx Wakeup Non-Secure Physical Address offsets in SAR_BANK3 */ #define CPU0_WAKEUP_NS_PA_ADDR_OFFSET 0xa04 @@ -48,13 +48,13 @@ #define SAR_BACKUP_STATUS_WAKEUPGEN 0x10 /* WakeUpGen save restore offset from OMAP54XX_SAR_RAM_BASE */ -#define OMAP5_WAKEUPGENENB_OFFSET_CPU0 (SAR_BANK3_OFFSET + 0x8d4) -#define OMAP5_WAKEUPGENENB_SECURE_OFFSET_CPU0 (SAR_BANK3_OFFSET + 0x8e8) -#define OMAP5_WAKEUPGENENB_OFFSET_CPU1 (SAR_BANK3_OFFSET + 0x8fc) -#define OMAP5_WAKEUPGENENB_SECURE_OFFSET_CPU1 (SAR_BANK3_OFFSET + 0x910) -#define OMAP5_AUXCOREBOOT0_OFFSET (SAR_BANK3_OFFSET + 0x924) -#define OMAP5_AUXCOREBOOT1_OFFSET (SAR_BANK3_OFFSET + 0x928) -#define OMAP5_AMBA_IF_MODE_OFFSET (SAR_BANK3_OFFSET + 0x92c) +#define OMAP5_WAKEUPGENENB_OFFSET_CPU0 (SAR_BANK3_OFFSET + 0x9dc) +#define OMAP5_WAKEUPGENENB_SECURE_OFFSET_CPU0 (SAR_BANK3_OFFSET + 0x9f0) +#define OMAP5_WAKEUPGENENB_OFFSET_CPU1 (SAR_BANK3_OFFSET + 0xa04) +#define OMAP5_WAKEUPGENENB_SECURE_OFFSET_CPU1 (SAR_BANK3_OFFSET + 0xa18) +#define OMAP5_AUXCOREBOOT0_OFFSET (SAR_BANK3_OFFSET + 0xa2c) +#define OMAP5_AUXCOREBOOT1_OFFSET (SAR_BANK3_OFFSET + 0x930) +#define OMAP5_AMBA_IF_MODE_OFFSET (SAR_BANK3_OFFSET + 0xa34) #define OMAP5_SAR_BACKUP_STATUS_OFFSET (SAR_BANK3_OFFSET + 0x800) #endif diff --git a/arch/arm/mach-omap2/omap54xx.h b/arch/arm/mach-omap2/omap54xx.h index a2582bb3cab3..a086ba15868b 100644 --- a/arch/arm/mach-omap2/omap54xx.h +++ b/arch/arm/mach-omap2/omap54xx.h @@ -28,5 +28,6 @@ #define OMAP54XX_PRCM_MPU_BASE 0x48243000 #define OMAP54XX_SCM_BASE 0x4a002000 #define OMAP54XX_CTRL_BASE 0x4a002800 +#define OMAP54XX_SAR_RAM_BASE 0x4ae26000 #endif /* __ASM_SOC_OMAP555554XX_H */ diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index 381be7ac0c17..eeea4fa28fbc 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -131,7 +131,7 @@ static int omap_device_build_from_dt(struct platform_device *pdev) int oh_cnt, i, ret = 0; oh_cnt = of_property_count_strings(node, "ti,hwmods"); - if (!oh_cnt || IS_ERR_VALUE(oh_cnt)) { + if (oh_cnt <= 0) { dev_dbg(&pdev->dev, "No 'hwmods' to build omap_device\n"); return -ENODEV; } @@ -815,20 +815,17 @@ struct device *omap_device_get_by_hwmod_name(const char *oh_name) } oh = omap_hwmod_lookup(oh_name); - if (IS_ERR_OR_NULL(oh)) { + if (!oh) { WARN(1, "%s: no hwmod for %s\n", __func__, oh_name); - return ERR_PTR(oh ? PTR_ERR(oh) : -ENODEV); + return ERR_PTR(-ENODEV); } - if (IS_ERR_OR_NULL(oh->od)) { + if (!oh->od) { WARN(1, "%s: no omap_device for %s\n", __func__, oh_name); - return ERR_PTR(oh->od ? PTR_ERR(oh->od) : -ENODEV); + return ERR_PTR(-ENODEV); } - if (IS_ERR_OR_NULL(oh->od->pdev)) - return ERR_PTR(oh->od->pdev ? PTR_ERR(oh->od->pdev) : -ENODEV); - return &oh->od->pdev->dev; } diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index a202a4785104..d25a95fe9921 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -138,6 +138,9 @@ #include <linux/spinlock.h> #include <linux/slab.h> #include <linux/bootmem.h> +#include <linux/cpu.h> +#include <linux/of.h> +#include <linux/of_address.h> #include <asm/system_misc.h> @@ -610,8 +613,6 @@ static int _enable_wakeup(struct omap_hwmod *oh, u32 *v) /* XXX test pwrdm_get_wken for this hwmod's subsystem */ - oh->_int_flags |= _HWMOD_WAKEUP_ENABLED; - return 0; } @@ -645,8 +646,6 @@ static int _disable_wakeup(struct omap_hwmod *oh, u32 *v) /* XXX test pwrdm_get_wken for this hwmod's subsystem */ - oh->_int_flags &= ~_HWMOD_WAKEUP_ENABLED; - return 0; } @@ -1666,7 +1665,7 @@ static int _deassert_hardreset(struct omap_hwmod *oh, const char *name) return -ENOSYS; ret = _lookup_hardreset(oh, name, &ohri); - if (IS_ERR_VALUE(ret)) + if (ret < 0) return ret; if (oh->clkdm) { @@ -2157,7 +2156,7 @@ static int _enable(struct omap_hwmod *oh) if (soc_ops.enable_module) soc_ops.enable_module(oh); if (oh->flags & HWMOD_BLOCK_WFI) - disable_hlt(); + cpu_idle_poll_ctrl(true); if (soc_ops.update_context_lost) soc_ops.update_context_lost(oh); @@ -2221,7 +2220,7 @@ static int _idle(struct omap_hwmod *oh) _del_initiator_dep(oh, mpu_oh); if (oh->flags & HWMOD_BLOCK_WFI) - enable_hlt(); + cpu_idle_poll_ctrl(false); if (soc_ops.disable_module) soc_ops.disable_module(oh); @@ -2331,7 +2330,7 @@ static int _shutdown(struct omap_hwmod *oh) _del_initiator_dep(oh, mpu_oh); /* XXX what about the other system initiators here? dma, dsp */ if (oh->flags & HWMOD_BLOCK_WFI) - enable_hlt(); + cpu_idle_poll_ctrl(false); if (soc_ops.disable_module) soc_ops.disable_module(oh); _disable_clocks(oh); @@ -2353,6 +2352,34 @@ static int _shutdown(struct omap_hwmod *oh) } /** + * of_dev_hwmod_lookup - look up needed hwmod from dt blob + * @np: struct device_node * + * @oh: struct omap_hwmod * + * + * Parse the dt blob and find out needed hwmod. Recursive function is + * implemented to take care hierarchical dt blob parsing. + * Return: The device node on success or NULL on failure. + */ +static struct device_node *of_dev_hwmod_lookup(struct device_node *np, + struct omap_hwmod *oh) +{ + struct device_node *np0 = NULL, *np1 = NULL; + const char *p; + + for_each_child_of_node(np, np0) { + if (of_find_property(np0, "ti,hwmods", NULL)) { + p = of_get_property(np0, "ti,hwmods", NULL); + if (!strcmp(p, oh->name)) + return np0; + np1 = of_dev_hwmod_lookup(np0, oh); + if (np1) + return np1; + } + } + return NULL; +} + +/** * _init_mpu_rt_base - populate the virtual address for a hwmod * @oh: struct omap_hwmod * to locate the virtual address * @@ -2364,7 +2391,8 @@ static int _shutdown(struct omap_hwmod *oh) static void __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data) { struct omap_hwmod_addr_space *mem; - void __iomem *va_start; + void __iomem *va_start = NULL; + struct device_node *np; if (!oh) return; @@ -2378,10 +2406,18 @@ static void __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data) if (!mem) { pr_debug("omap_hwmod: %s: no MPU register target found\n", oh->name); - return; + + /* Extract the IO space from device tree blob */ + if (!of_have_populated_dt()) + return; + + np = of_dev_hwmod_lookup(of_find_node_by_name(NULL, "ocp"), oh); + if (np) + va_start = of_iomap(np, 0); + } else { + va_start = ioremap(mem->pa_start, mem->pa_end - mem->pa_start); } - va_start = ioremap(mem->pa_start, mem->pa_end - mem->pa_start); if (!va_start) { pr_err("omap_hwmod: %s: Could not ioremap\n", oh->name); return; @@ -2413,10 +2449,11 @@ static int __init _init(struct omap_hwmod *oh, void *data) if (oh->_state != _HWMOD_STATE_REGISTERED) return 0; - _init_mpu_rt_base(oh, NULL); + if (oh->class->sysc) + _init_mpu_rt_base(oh, NULL); r = _init_clocks(oh, NULL); - if (IS_ERR_VALUE(r)) { + if (r < 0) { WARN(1, "omap_hwmod: %s: couldn't init clocks\n", oh->name); return -EINVAL; } diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index d5dc935f6060..fe5962921f07 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -482,15 +482,13 @@ struct omap_hwmod_omap4_prcm { * These are for internal use only and are managed by the omap_hwmod code. * * _HWMOD_NO_MPU_PORT: no path exists for the MPU to write to this module - * _HWMOD_WAKEUP_ENABLED: set when the omap_hwmod code has enabled ENAWAKEUP * _HWMOD_SYSCONFIG_LOADED: set when the OCP_SYSCONFIG value has been cached * _HWMOD_SKIP_ENABLE: set if hwmod enabled during init (HWMOD_INIT_NO_IDLE) - * causes the first call to _enable() to only update the pinmux */ #define _HWMOD_NO_MPU_PORT (1 << 0) -#define _HWMOD_WAKEUP_ENABLED (1 << 1) -#define _HWMOD_SYSCONFIG_LOADED (1 << 2) -#define _HWMOD_SKIP_ENABLE (1 << 3) +#define _HWMOD_SYSCONFIG_LOADED (1 << 1) +#define _HWMOD_SKIP_ENABLE (1 << 2) /* * omap_hwmod._state definitions diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index 6a764af6c6d3..5137cc84b504 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -610,6 +610,8 @@ static struct omap_hwmod_ocp_if *omap2420_hwmod_ocp_ifs[] __initdata = { &omap2420_l4_core__mcbsp2, &omap2420_l4_core__msdi1, &omap2xxx_l4_core__rng, + &omap2xxx_l4_core__sham, + &omap2xxx_l4_core__aes, &omap2420_l4_core__hdq1w, &omap2420_l4_wkup__counter_32k, &omap2420_l3__gpmc, diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index d2d3840557c3..4ce999ee3ee9 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -963,6 +963,8 @@ static struct omap_hwmod_ocp_if *omap2430_hwmod_ocp_ifs[] __initdata = { &omap2430_l4_core__mcbsp5, &omap2430_l4_core__hdq1w, &omap2xxx_l4_core__rng, + &omap2xxx_l4_core__sham, + &omap2xxx_l4_core__aes, &omap2430_l4_wkup__counter_32k, &omap2430_l3__gpmc, NULL, diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c index 47901a5e76de..5fd40d4a989e 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c @@ -138,6 +138,24 @@ static struct omap_hwmod_addr_space omap2_rng_addr_space[] = { { } }; +static struct omap_hwmod_addr_space omap2xxx_sham_addrs[] = { + { + .pa_start = 0x480a4000, + .pa_end = 0x480a4000 + 0x64 - 1, + .flags = ADDR_TYPE_RT + }, + { } +}; + +static struct omap_hwmod_addr_space omap2xxx_aes_addrs[] = { + { + .pa_start = 0x480a6000, + .pa_end = 0x480a6000 + 0x50 - 1, + .flags = ADDR_TYPE_RT + }, + { } +}; + /* * Common interconnect data */ @@ -389,3 +407,21 @@ struct omap_hwmod_ocp_if omap2xxx_l4_core__rng = { .addr = omap2_rng_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, }; + +/* l4 core -> sham interface */ +struct omap_hwmod_ocp_if omap2xxx_l4_core__sham = { + .master = &omap2xxx_l4_core_hwmod, + .slave = &omap2xxx_sham_hwmod, + .clk = "sha_ick", + .addr = omap2xxx_sham_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4 core -> aes interface */ +struct omap_hwmod_ocp_if omap2xxx_l4_core__aes = { + .master = &omap2xxx_l4_core_hwmod, + .slave = &omap2xxx_aes_hwmod, + .clk = "aes_ick", + .addr = omap2xxx_aes_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c index e596117004d4..c8c64b3e1acc 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c @@ -864,3 +864,84 @@ struct omap_hwmod omap2xxx_rng_hwmod = { .flags = HWMOD_INIT_NO_RESET, .class = &omap2_rng_hwmod_class, }; + +/* SHAM */ + +static struct omap_hwmod_class_sysconfig omap2_sham_sysc = { + .rev_offs = 0x5c, + .sysc_offs = 0x60, + .syss_offs = 0x64, + .sysc_flags = (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE | + SYSS_HAS_RESET_STATUS), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap2xxx_sham_class = { + .name = "sham", + .sysc = &omap2_sham_sysc, +}; + +static struct omap_hwmod_irq_info omap2_sham_mpu_irqs[] = { + { .irq = 51 + OMAP_INTC_START, }, + { .irq = -1 } +}; + +static struct omap_hwmod_dma_info omap2_sham_sdma_chs[] = { + { .name = "rx", .dma_req = 13 }, + { .dma_req = -1 } +}; + +struct omap_hwmod omap2xxx_sham_hwmod = { + .name = "sham", + .mpu_irqs = omap2_sham_mpu_irqs, + .sdma_reqs = omap2_sham_sdma_chs, + .main_clk = "l4_ck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 4, + .module_bit = OMAP24XX_EN_SHA_SHIFT, + .idlest_reg_id = 4, + .idlest_idle_bit = OMAP24XX_ST_SHA_SHIFT, + }, + }, + .class = &omap2xxx_sham_class, +}; + +/* AES */ + +static struct omap_hwmod_class_sysconfig omap2_aes_sysc = { + .rev_offs = 0x44, + .sysc_offs = 0x48, + .syss_offs = 0x4c, + .sysc_flags = (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE | + SYSS_HAS_RESET_STATUS), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap2xxx_aes_class = { + .name = "aes", + .sysc = &omap2_aes_sysc, +}; + +static struct omap_hwmod_dma_info omap2_aes_sdma_chs[] = { + { .name = "tx", .dma_req = 9 }, + { .name = "rx", .dma_req = 10 }, + { .dma_req = -1 } +}; + +struct omap_hwmod omap2xxx_aes_hwmod = { + .name = "aes", + .sdma_reqs = omap2_aes_sdma_chs, + .main_clk = "l4_ck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 4, + .module_bit = OMAP24XX_EN_AES_SHIFT, + .idlest_reg_id = 4, + .idlest_idle_bit = OMAP24XX_ST_AES_SHIFT, + }, + }, + .class = &omap2xxx_aes_class, +}; diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c index 26eee4a556ad..01d8f324450a 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c @@ -28,6 +28,7 @@ #include "prm-regbits-33xx.h" #include "i2c.h" #include "mmc.h" +#include "wd_timer.h" /* * IP blocks @@ -417,8 +418,6 @@ static struct omap_hwmod am33xx_adc_tsc_hwmod = { * - clkdiv32k * - debugss * - ocp watch point - * - aes0 - * - sha0 */ #if 0 /* @@ -499,25 +498,41 @@ static struct omap_hwmod am33xx_ocpwp_hwmod = { }, }, }; +#endif /* - * 'aes' class + * 'aes0' class */ -static struct omap_hwmod_class am33xx_aes_hwmod_class = { - .name = "aes", +static struct omap_hwmod_class_sysconfig am33xx_aes0_sysc = { + .rev_offs = 0x80, + .sysc_offs = 0x84, + .syss_offs = 0x88, + .sysc_flags = SYSS_HAS_RESET_STATUS, +}; + +static struct omap_hwmod_class am33xx_aes0_hwmod_class = { + .name = "aes0", + .sysc = &am33xx_aes0_sysc, }; static struct omap_hwmod_irq_info am33xx_aes0_irqs[] = { - { .irq = 102 + OMAP_INTC_START, }, + { .irq = 103 + OMAP_INTC_START, }, { .irq = -1 }, }; +static struct omap_hwmod_dma_info am33xx_aes0_edma_reqs[] = { + { .name = "tx", .dma_req = 6, }, + { .name = "rx", .dma_req = 5, }, + { .dma_req = -1 } +}; + static struct omap_hwmod am33xx_aes0_hwmod = { - .name = "aes0", - .class = &am33xx_aes_hwmod_class, + .name = "aes", + .class = &am33xx_aes0_hwmod_class, .clkdm_name = "l3_clkdm", .mpu_irqs = am33xx_aes0_irqs, - .main_clk = "l3_gclk", + .sdma_reqs = am33xx_aes0_edma_reqs, + .main_clk = "aes0_fck", .prcm = { .omap4 = { .clkctrl_offs = AM33XX_CM_PER_AES0_CLKCTRL_OFFSET, @@ -526,21 +541,35 @@ static struct omap_hwmod am33xx_aes0_hwmod = { }, }; -/* sha0 */ +/* sha0 HIB2 (the 'P' (public) device) */ +static struct omap_hwmod_class_sysconfig am33xx_sha0_sysc = { + .rev_offs = 0x100, + .sysc_offs = 0x110, + .syss_offs = 0x114, + .sysc_flags = SYSS_HAS_RESET_STATUS, +}; + static struct omap_hwmod_class am33xx_sha0_hwmod_class = { .name = "sha0", + .sysc = &am33xx_sha0_sysc, }; static struct omap_hwmod_irq_info am33xx_sha0_irqs[] = { - { .irq = 108 + OMAP_INTC_START, }, + { .irq = 109 + OMAP_INTC_START, }, { .irq = -1 }, }; +static struct omap_hwmod_dma_info am33xx_sha0_edma_reqs[] = { + { .name = "rx", .dma_req = 36, }, + { .dma_req = -1 } +}; + static struct omap_hwmod am33xx_sha0_hwmod = { - .name = "sha0", + .name = "sham", .class = &am33xx_sha0_hwmod_class, .clkdm_name = "l3_clkdm", .mpu_irqs = am33xx_sha0_irqs, + .sdma_reqs = am33xx_sha0_edma_reqs, .main_clk = "l3_gclk", .prcm = { .omap4 = { @@ -550,8 +579,6 @@ static struct omap_hwmod am33xx_sha0_hwmod = { }, }; -#endif - /* ocmcram */ static struct omap_hwmod_class am33xx_ocmcram_hwmod_class = { .name = "ocmcram", @@ -2087,8 +2114,21 @@ static struct omap_hwmod am33xx_uart6_hwmod = { }; /* 'wd_timer' class */ +static struct omap_hwmod_class_sysconfig wdt_sysc = { + .rev_offs = 0x0, + .sysc_offs = 0x10, + .syss_offs = 0x14, + .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + SIDLE_SMART_WKUP), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + static struct omap_hwmod_class am33xx_wd_timer_hwmod_class = { .name = "wd_timer", + .sysc = &wdt_sysc, + .pre_shutdown = &omap2_wd_timer_disable, }; /* @@ -2099,6 +2139,7 @@ static struct omap_hwmod am33xx_wd_timer1_hwmod = { .name = "wd_timer2", .class = &am33xx_wd_timer_hwmod_class, .clkdm_name = "l4_wkup_clkdm", + .flags = HWMOD_SWSUP_SIDLE, .main_clk = "wdt1_fck", .prcm = { .omap4 = { @@ -3434,6 +3475,42 @@ static struct omap_hwmod_ocp_if am33xx_l3_main__ocmc = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +/* l3 main -> sha0 HIB2 */ +static struct omap_hwmod_addr_space am33xx_sha0_addrs[] = { + { + .pa_start = 0x53100000, + .pa_end = 0x53100000 + SZ_512 - 1, + .flags = ADDR_TYPE_RT + }, + { } +}; + +static struct omap_hwmod_ocp_if am33xx_l3_main__sha0 = { + .master = &am33xx_l3_main_hwmod, + .slave = &am33xx_sha0_hwmod, + .clk = "sha0_fck", + .addr = am33xx_sha0_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l3 main -> AES0 HIB2 */ +static struct omap_hwmod_addr_space am33xx_aes0_addrs[] = { + { + .pa_start = 0x53500000, + .pa_end = 0x53500000 + SZ_1M - 1, + .flags = ADDR_TYPE_RT + }, + { } +}; + +static struct omap_hwmod_ocp_if am33xx_l3_main__aes0 = { + .master = &am33xx_l3_main_hwmod, + .slave = &am33xx_aes0_hwmod, + .clk = "aes0_fck", + .addr = am33xx_aes0_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = { &am33xx_l4_fw__emif_fw, &am33xx_l3_main__emif, @@ -3514,6 +3591,8 @@ static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = { &am33xx_l3_s__usbss, &am33xx_l4_hs__cpgmac0, &am33xx_cpgmac0__mdio, + &am33xx_l3_main__sha0, + &am33xx_l3_main__aes0, NULL, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 5112d04e7b79..4083606ea1da 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -3550,6 +3550,132 @@ static struct omap_hwmod_ocp_if omap3xxx_l3_main__gpmc = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +/* l4_core -> SHAM2 (SHA1/MD5) (similar to omap24xx) */ +static struct omap_hwmod_sysc_fields omap3_sham_sysc_fields = { + .sidle_shift = 4, + .srst_shift = 1, + .autoidle_shift = 0, +}; + +static struct omap_hwmod_class_sysconfig omap3_sham_sysc = { + .rev_offs = 0x5c, + .sysc_offs = 0x60, + .syss_offs = 0x64, + .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | + SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS), + .sysc_fields = &omap3_sham_sysc_fields, +}; + +static struct omap_hwmod_class omap3xxx_sham_class = { + .name = "sham", + .sysc = &omap3_sham_sysc, +}; + +static struct omap_hwmod_irq_info omap3_sham_mpu_irqs[] = { + { .irq = 49 + OMAP_INTC_START, }, + { .irq = -1 } +}; + +static struct omap_hwmod_dma_info omap3_sham_sdma_reqs[] = { + { .name = "rx", .dma_req = OMAP34XX_DMA_SHA1MD5_RX, }, + { .dma_req = -1 } +}; + +static struct omap_hwmod omap3xxx_sham_hwmod = { + .name = "sham", + .mpu_irqs = omap3_sham_mpu_irqs, + .sdma_reqs = omap3_sham_sdma_reqs, + .main_clk = "sha12_ick", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_SHA12_SHIFT, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430_ST_SHA12_SHIFT, + }, + }, + .class = &omap3xxx_sham_class, +}; + +static struct omap_hwmod_addr_space omap3xxx_sham_addrs[] = { + { + .pa_start = 0x480c3000, + .pa_end = 0x480c3000 + 0x64 - 1, + .flags = ADDR_TYPE_RT + }, + { } +}; + +static struct omap_hwmod_ocp_if omap3xxx_l4_core__sham = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap3xxx_sham_hwmod, + .clk = "sha12_ick", + .addr = omap3xxx_sham_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_core -> AES */ +static struct omap_hwmod_sysc_fields omap3xxx_aes_sysc_fields = { + .sidle_shift = 6, + .srst_shift = 1, + .autoidle_shift = 0, +}; + +static struct omap_hwmod_class_sysconfig omap3_aes_sysc = { + .rev_offs = 0x44, + .sysc_offs = 0x48, + .syss_offs = 0x4c, + .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | + SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap3xxx_aes_sysc_fields, +}; + +static struct omap_hwmod_class omap3xxx_aes_class = { + .name = "aes", + .sysc = &omap3_aes_sysc, +}; + +static struct omap_hwmod_dma_info omap3_aes_sdma_reqs[] = { + { .name = "tx", .dma_req = OMAP34XX_DMA_AES2_TX, }, + { .name = "rx", .dma_req = OMAP34XX_DMA_AES2_RX, }, + { .dma_req = -1 } +}; + +static struct omap_hwmod omap3xxx_aes_hwmod = { + .name = "aes", + .sdma_reqs = omap3_aes_sdma_reqs, + .main_clk = "aes2_ick", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_AES2_SHIFT, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430_ST_AES2_SHIFT, + }, + }, + .class = &omap3xxx_aes_class, +}; + +static struct omap_hwmod_addr_space omap3xxx_aes_addrs[] = { + { + .pa_start = 0x480c5000, + .pa_end = 0x480c5000 + 0x50 - 1, + .flags = ADDR_TYPE_RT + }, + { } +}; + +static struct omap_hwmod_ocp_if omap3xxx_l4_core__aes = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap3xxx_aes_hwmod, + .clk = "aes2_ick", + .addr = omap3xxx_aes_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + static struct omap_hwmod_ocp_if *omap3xxx_hwmod_ocp_ifs[] __initdata = { &omap3xxx_l3_main__l4_core, &omap3xxx_l3_main__l4_per, @@ -3601,8 +3727,32 @@ static struct omap_hwmod_ocp_if *omap3xxx_hwmod_ocp_ifs[] __initdata = { }; /* GP-only hwmod links */ -static struct omap_hwmod_ocp_if *omap3xxx_gp_hwmod_ocp_ifs[] __initdata = { +static struct omap_hwmod_ocp_if *omap34xx_gp_hwmod_ocp_ifs[] __initdata = { &omap3xxx_l4_sec__timer12, + &omap3xxx_l4_core__sham, + &omap3xxx_l4_core__aes, + NULL +}; + +static struct omap_hwmod_ocp_if *omap36xx_gp_hwmod_ocp_ifs[] __initdata = { + &omap3xxx_l4_sec__timer12, + &omap3xxx_l4_core__sham, + &omap3xxx_l4_core__aes, + NULL +}; + +static struct omap_hwmod_ocp_if *am35xx_gp_hwmod_ocp_ifs[] __initdata = { + &omap3xxx_l4_sec__timer12, + /* + * Apparently the SHA/MD5 and AES accelerator IP blocks are + * only present on some AM35xx chips, and no one knows which + * ones. See + * http://www.spinics.net/lists/arm-kernel/msg215466.html So + * if you need these IP blocks on an AM35xx, try uncommenting + * the following lines. + */ + /* &omap3xxx_l4_core__sham, */ + /* &omap3xxx_l4_core__aes, */ NULL }; @@ -3709,7 +3859,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_hwmod_ocp_ifs[] __initdata = { int __init omap3xxx_hwmod_init(void) { int r; - struct omap_hwmod_ocp_if **h = NULL; + struct omap_hwmod_ocp_if **h = NULL, **h_gp = NULL; unsigned int rev; omap_hwmod_init(); @@ -3719,13 +3869,6 @@ int __init omap3xxx_hwmod_init(void) if (r < 0) return r; - /* Register GP-only hwmod links. */ - if (omap_type() == OMAP2_DEVICE_TYPE_GP) { - r = omap_hwmod_register_links(omap3xxx_gp_hwmod_ocp_ifs); - if (r < 0) - return r; - } - rev = omap_rev(); /* @@ -3737,11 +3880,14 @@ int __init omap3xxx_hwmod_init(void) rev == OMAP3430_REV_ES2_1 || rev == OMAP3430_REV_ES3_0 || rev == OMAP3430_REV_ES3_1 || rev == OMAP3430_REV_ES3_1_2) { h = omap34xx_hwmod_ocp_ifs; + h_gp = omap34xx_gp_hwmod_ocp_ifs; } else if (rev == AM35XX_REV_ES1_0 || rev == AM35XX_REV_ES1_1) { h = am35xx_hwmod_ocp_ifs; + h_gp = am35xx_gp_hwmod_ocp_ifs; } else if (rev == OMAP3630_REV_ES1_0 || rev == OMAP3630_REV_ES1_1 || rev == OMAP3630_REV_ES1_2) { h = omap36xx_hwmod_ocp_ifs; + h_gp = omap36xx_gp_hwmod_ocp_ifs; } else { WARN(1, "OMAP3 hwmod family init: unknown chip type\n"); return -EINVAL; @@ -3751,6 +3897,14 @@ int __init omap3xxx_hwmod_init(void) if (r < 0) return r; + /* Register GP-only hwmod links. */ + if (h_gp && omap_type() == OMAP2_DEVICE_TYPE_GP) { + r = omap_hwmod_register_links(h_gp); + if (r < 0) + return r; + } + + /* * Register hwmod links specific to certain ES levels of a * particular family of silicon (e.g., 34xx ES1.0) diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 9e0576569e07..eaba9dc91a0d 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -2714,16 +2714,22 @@ static struct omap_ocp2scp_dev ocp2scp_dev_attr[] = { { } }; -static struct omap_hwmod_opt_clk ocp2scp_usb_phy_opt_clks[] = { - { .role = "48mhz", .clk = "ocp2scp_usb_phy_phy_48m" }, -}; - /* ocp2scp_usb_phy */ static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = { .name = "ocp2scp_usb_phy", .class = &omap44xx_ocp2scp_hwmod_class, .clkdm_name = "l3_init_clkdm", - .main_clk = "func_48m_fclk", + /* + * ocp2scp_usb_phy_phy_48m is provided by the OMAP4 PRCM IP + * block as an "optional clock," and normally should never be + * specified as the main_clk for an OMAP IP block. However it + * turns out that this clock is actually the main clock for + * the ocp2scp_usb_phy IP block: + * http://lists.infradead.org/pipermail/linux-arm-kernel/2012-September/119943.html + * So listing ocp2scp_usb_phy_phy_48m as a main_clk here seems + * to be the best workaround. + */ + .main_clk = "ocp2scp_usb_phy_phy_48m", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL_OFFSET, @@ -2732,8 +2738,6 @@ static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = { }, }, .dev_attr = ocp2scp_dev_attr, - .opt_clks = ocp2scp_usb_phy_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(ocp2scp_usb_phy_opt_clks), }; /* diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.h b/arch/arm/mach-omap2/omap_hwmod_common_data.h index cfcce299177c..6e04ff7065e1 100644 --- a/arch/arm/mach-omap2/omap_hwmod_common_data.h +++ b/arch/arm/mach-omap2/omap_hwmod_common_data.h @@ -78,6 +78,8 @@ extern struct omap_hwmod omap2xxx_mcspi2_hwmod; extern struct omap_hwmod omap2xxx_counter_32k_hwmod; extern struct omap_hwmod omap2xxx_gpmc_hwmod; extern struct omap_hwmod omap2xxx_rng_hwmod; +extern struct omap_hwmod omap2xxx_sham_hwmod; +extern struct omap_hwmod omap2xxx_aes_hwmod; /* Common interface data across OMAP2xxx */ extern struct omap_hwmod_ocp_if omap2xxx_l3_main__l4_core; @@ -105,6 +107,8 @@ extern struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_dispc; extern struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_rfbi; extern struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_venc; extern struct omap_hwmod_ocp_if omap2xxx_l4_core__rng; +extern struct omap_hwmod_ocp_if omap2xxx_l4_core__sham; +extern struct omap_hwmod_ocp_if omap2xxx_l4_core__aes; /* Common IP block data */ extern struct omap_hwmod_dma_info omap2_uart1_sdma_reqs[]; diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c index 1edd000a8143..0b339861d751 100644 --- a/arch/arm/mach-omap2/pm-debug.c +++ b/arch/arm/mach-omap2/pm-debug.c @@ -217,7 +217,7 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *dir) return 0; d = debugfs_create_dir(pwrdm->name, (struct dentry *)dir); - if (!(IS_ERR_OR_NULL(d))) + if (d) (void) debugfs_create_file("suspend", S_IRUGO|S_IWUSR, d, (void *)pwrdm, &pwrdm_suspend_fops); @@ -261,8 +261,8 @@ static int __init pm_dbg_init(void) return 0; d = debugfs_create_dir("pm_debug", NULL); - if (IS_ERR_OR_NULL(d)) - return PTR_ERR(d); + if (!d) + return -EINVAL; (void) debugfs_create_file("count", S_IRUGO, d, (void *)DEBUG_FILE_COUNTERS, &debug_fops); diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 673a4c1d1d76..e742118fcfd2 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -218,7 +218,7 @@ static int omap_pm_enter(suspend_state_t suspend_state) static int omap_pm_begin(suspend_state_t state) { - disable_hlt(); + cpu_idle_poll_ctrl(true); if (cpu_is_omap34xx()) omap_prcm_irq_prepare(); return 0; @@ -226,8 +226,7 @@ static int omap_pm_begin(suspend_state_t state) static void omap_pm_end(void) { - enable_hlt(); - return; + cpu_idle_poll_ctrl(false); } static void omap_pm_finish(void) @@ -265,6 +264,12 @@ static void __init omap4_init_voltages(void) omap2_set_init_voltage("iva", "dpll_iva_m5x2_ck", "iva"); } +static inline void omap_init_cpufreq(void) +{ + struct platform_device_info devinfo = { .name = "omap-cpufreq", }; + platform_device_register_full(&devinfo); +} + static int __init omap2_common_pm_init(void) { if (!of_have_populated_dt()) @@ -294,6 +299,9 @@ int __init omap2_common_pm_late_init(void) /* Smartreflex device init */ omap_devinit_smartreflex(); + + /* cpufreq dummy device instantiation */ + omap_init_cpufreq(); } #ifdef CONFIG_SUSPEND diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index b59d93908341..ce956b0a7ba4 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -200,22 +200,17 @@ static int omap2_can_sleep(void) static void omap2_pm_idle(void) { - local_fiq_disable(); - if (!omap2_can_sleep()) { if (omap_irq_pending()) - goto out; + return; omap2_enter_mpu_retention(); - goto out; + return; } if (omap_irq_pending()) - goto out; + return; omap2_enter_full_retention(); - -out: - local_fiq_enable(); } static void __init prcm_setup_regs(void) diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 2d93d8b23835..c01859398b54 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -346,19 +346,14 @@ void omap_sram_idle(void) static void omap3_pm_idle(void) { - local_fiq_disable(); - if (omap_irq_pending()) - goto out; + return; trace_cpu_idle(1, smp_processor_id()); omap_sram_idle(); trace_cpu_idle(PWR_EVENT_EXIT, smp_processor_id()); - -out: - local_fiq_enable(); } #ifdef CONFIG_SUSPEND @@ -757,14 +752,12 @@ int __init omap3_pm_init(void) pr_err("Memory allocation failed when allocating for secure sram context\n"); local_irq_disable(); - local_fiq_disable(); omap_dma_global_context_save(); omap3_save_secure_ram_context(); omap_dma_global_context_restore(); local_irq_enable(); - local_fiq_enable(); } omap3_save_scratchpad_contents(); diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c index ea62e75ef21d..a251f87fa2a2 100644 --- a/arch/arm/mach-omap2/pm44xx.c +++ b/arch/arm/mach-omap2/pm44xx.c @@ -126,16 +126,12 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused) * omap_default_idle - OMAP4 default ilde routine.' * * Implements OMAP4 memory, IO ordering requirements which can't be addressed - * with default cpu_do_idle() hook. Used by all CPUs with !CONFIG_CPUIDLE and - * by secondary CPU with CONFIG_CPUIDLE. + * with default cpu_do_idle() hook. Used by all CPUs with !CONFIG_CPU_IDLE and + * by secondary CPU with CONFIG_CPU_IDLE. */ static void omap_default_idle(void) { - local_fiq_disable(); - omap_do_wfi(); - - local_fiq_enable(); } /** @@ -147,8 +143,8 @@ static void omap_default_idle(void) int __init omap4_pm_init(void) { int ret; - struct clockdomain *emif_clkdm, *mpuss_clkdm, *l3_1_clkdm, *l4wkup; - struct clockdomain *ducati_clkdm, *l3_2_clkdm, *l4_per_clkdm; + struct clockdomain *emif_clkdm, *mpuss_clkdm, *l3_1_clkdm; + struct clockdomain *ducati_clkdm, *l3_2_clkdm; if (omap_rev() == OMAP4430_REV_ES1_0) { WARN(1, "Power Management not supported on OMAP4430 ES1.0\n"); @@ -175,27 +171,19 @@ int __init omap4_pm_init(void) * MPUSS -> L4_PER/L3_* and DUCATI -> L3_* doesn't work as * expected. The hardware recommendation is to enable static * dependencies for these to avoid system lock ups or random crashes. - * The L4 wakeup depedency is added to workaround the OCP sync hardware - * BUG with 32K synctimer which lead to incorrect timer value read - * from the 32K counter. The BUG applies for GPTIMER1 and WDT2 which - * are part of L4 wakeup clockdomain. */ mpuss_clkdm = clkdm_lookup("mpuss_clkdm"); emif_clkdm = clkdm_lookup("l3_emif_clkdm"); l3_1_clkdm = clkdm_lookup("l3_1_clkdm"); l3_2_clkdm = clkdm_lookup("l3_2_clkdm"); - l4_per_clkdm = clkdm_lookup("l4_per_clkdm"); - l4wkup = clkdm_lookup("l4_wkup_clkdm"); ducati_clkdm = clkdm_lookup("ducati_clkdm"); - if ((!mpuss_clkdm) || (!emif_clkdm) || (!l3_1_clkdm) || (!l4wkup) || - (!l3_2_clkdm) || (!ducati_clkdm) || (!l4_per_clkdm)) + if ((!mpuss_clkdm) || (!emif_clkdm) || (!l3_1_clkdm) || + (!l3_2_clkdm) || (!ducati_clkdm)) goto err2; ret = clkdm_add_wkdep(mpuss_clkdm, emif_clkdm); ret |= clkdm_add_wkdep(mpuss_clkdm, l3_1_clkdm); ret |= clkdm_add_wkdep(mpuss_clkdm, l3_2_clkdm); - ret |= clkdm_add_wkdep(mpuss_clkdm, l4_per_clkdm); - ret |= clkdm_add_wkdep(mpuss_clkdm, l4wkup); ret |= clkdm_add_wkdep(ducati_clkdm, l3_1_clkdm); ret |= clkdm_add_wkdep(ducati_clkdm, l3_2_clkdm); if (ret) { diff --git a/arch/arm/mach-omap2/pmu.c b/arch/arm/mach-omap2/pmu.c index 9debf822687c..9ace8eae7ee8 100644 --- a/arch/arm/mach-omap2/pmu.c +++ b/arch/arm/mach-omap2/pmu.c @@ -11,6 +11,8 @@ * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. */ +#include <linux/of.h> + #include <asm/pmu.h> #include "soc.h" @@ -63,6 +65,15 @@ static int __init omap_init_pmu(void) unsigned oh_num; char **oh_names; + /* XXX Remove this check when the CTI driver is available */ + if (cpu_is_omap443x()) { + pr_info("ARM PMU: not yet supported on OMAP4430 due to missing CTI driver\n"); + return 0; + } + + if (of_have_populated_dt()) + return 0; + /* * To create an ARM-PMU device the following HWMODs * are required for the various OMAP2+ devices. @@ -75,9 +86,6 @@ static int __init omap_init_pmu(void) if (cpu_is_omap443x()) { oh_num = ARRAY_SIZE(omap4430_pmu_oh_names); oh_names = omap4430_pmu_oh_names; - /* XXX Remove the next two lines when CTI driver available */ - pr_info("ARM PMU: not yet supported on OMAP4430 due to missing CTI driver\n"); - return 0; } else if (cpu_is_omap34xx() || cpu_is_omap44xx()) { oh_num = ARRAY_SIZE(omap3_pmu_oh_names); oh_names = omap3_pmu_oh_names; diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index 8e61d80bf6b3..86babd740d41 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -52,7 +52,6 @@ enum { #define ALREADYACTIVE_SWITCH 0 #define FORCEWAKEUP_SWITCH 1 #define LOWPOWERSTATE_SWITCH 2 -#define ERROR_SWITCH 3 /* pwrdm_list contains all registered struct powerdomains */ static LIST_HEAD(pwrdm_list); @@ -233,10 +232,7 @@ static u8 _pwrdm_save_clkdm_state_and_activate(struct powerdomain *pwrdm, { u8 sleep_switch; - if (curr_pwrst < 0) { - WARN_ON(1); - sleep_switch = ERROR_SWITCH; - } else if (curr_pwrst < PWRDM_POWER_ON) { + if (curr_pwrst < PWRDM_POWER_ON) { if (curr_pwrst > pwrst && pwrdm->flags & PWRDM_HAS_LOWPOWERSTATECHANGE && arch_pwrdm->pwrdm_set_lowpwrstchange) { @@ -1091,7 +1087,8 @@ int pwrdm_post_transition(struct powerdomain *pwrdm) */ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u8 pwrst) { - u8 curr_pwrst, next_pwrst, sleep_switch; + u8 next_pwrst, sleep_switch; + int curr_pwrst; int ret = 0; bool hwsup = false; @@ -1107,16 +1104,17 @@ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u8 pwrst) pwrdm_lock(pwrdm); curr_pwrst = pwrdm_read_pwrst(pwrdm); + if (curr_pwrst < 0) { + ret = -EINVAL; + goto osps_out; + } + next_pwrst = pwrdm_read_next_pwrst(pwrdm); if (curr_pwrst == pwrst && next_pwrst == pwrst) goto osps_out; sleep_switch = _pwrdm_save_clkdm_state_and_activate(pwrdm, curr_pwrst, pwrst, &hwsup); - if (sleep_switch == ERROR_SWITCH) { - ret = -EINVAL; - goto osps_out; - } ret = pwrdm_set_next_pwrst(pwrdm, pwrst); if (ret) @@ -1182,7 +1180,7 @@ bool pwrdm_can_ever_lose_context(struct powerdomain *pwrdm) { int i; - if (IS_ERR_OR_NULL(pwrdm)) { + if (!pwrdm) { pr_debug("powerdomain: %s: invalid powerdomain pointer\n", __func__); return 1; diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c index d35f98aabf7a..415c7e0c9393 100644 --- a/arch/arm/mach-omap2/prm44xx.c +++ b/arch/arm/mach-omap2/prm44xx.c @@ -81,13 +81,13 @@ static struct prm_reset_src_map omap44xx_prm_reset_src_map[] = { /* Read a register in a CM/PRM instance in the PRM module */ u32 omap4_prm_read_inst_reg(s16 inst, u16 reg) { - return __raw_readl(OMAP44XX_PRM_REGADDR(inst, reg)); + return __raw_readl(prm_base + inst + reg); } /* Write into a register in a CM/PRM instance in the PRM module */ void omap4_prm_write_inst_reg(u32 val, s16 inst, u16 reg) { - __raw_writel(val, OMAP44XX_PRM_REGADDR(inst, reg)); + __raw_writel(val, prm_base + inst + reg); } /* Read-modify-write a register in a PRM module. Caller must lock */ @@ -650,7 +650,7 @@ static struct prm_ll_data omap44xx_prm_ll_data = { int __init omap44xx_prm_init(void) { - if (!cpu_is_omap44xx()) + if (!cpu_is_omap44xx() && !soc_is_omap54xx()) return 0; return prm_register(&omap44xx_prm_ll_data); diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h index c62116bbc760..18fdeeb3a44a 100644 --- a/arch/arm/mach-omap2/soc.h +++ b/arch/arm/mach-omap2/soc.h @@ -413,7 +413,9 @@ IS_OMAP_TYPE(3430, 0x3430) #define OMAP54XX_CLASS 0x54000054 #define OMAP5430_REV_ES1_0 (OMAP54XX_CLASS | (0x30 << 16) | (0x10 << 8)) +#define OMAP5430_REV_ES2_0 (OMAP54XX_CLASS | (0x30 << 16) | (0x20 << 8)) #define OMAP5432_REV_ES1_0 (OMAP54XX_CLASS | (0x32 << 16) | (0x10 << 8)) +#define OMAP5432_REV_ES2_0 (OMAP54XX_CLASS | (0x32 << 16) | (0x20 << 8)) void omap2xxx_check_revision(void); void omap3xxx_check_revision(void); diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index f62b509ed08d..f8b23b8040d9 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -46,7 +46,6 @@ #include <asm/smp_twd.h> #include <asm/sched_clock.h> -#include <asm/arch_timer.h> #include "omap_hwmod.h" #include "omap_device.h" #include <plat/counter-32k.h> @@ -57,15 +56,6 @@ #include "common.h" #include "powerdomain.h" -/* Parent clocks, eventually these will come from the clock framework */ - -#define OMAP2_MPU_SOURCE "sys_ck" -#define OMAP3_MPU_SOURCE OMAP2_MPU_SOURCE -#define OMAP4_MPU_SOURCE "sys_clkin_ck" -#define OMAP2_32K_SOURCE "func_32k_ck" -#define OMAP3_32K_SOURCE "omap_32k_fck" -#define OMAP4_32K_SOURCE "sys_32k_ck" - #define REALTIME_COUNTER_BASE 0x48243200 #define INCREMENTER_NUMERATOR_OFFSET 0x10 #define INCREMENTER_DENUMERATOR_RELOAD_OFFSET 0x14 @@ -129,7 +119,6 @@ static void omap2_gp_timer_set_mode(enum clock_event_mode mode, } static struct clock_event_device clockevent_gpt = { - .name = "gp_timer", .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, .rating = 300, .set_next_event = omap2_gp_timer_set_next_event, @@ -143,7 +132,12 @@ static struct property device_disabled = { }; static struct of_device_id omap_timer_match[] __initdata = { - { .compatible = "ti,omap2-timer", }, + { .compatible = "ti,omap2420-timer", }, + { .compatible = "ti,omap3430-timer", }, + { .compatible = "ti,omap4430-timer", }, + { .compatible = "ti,omap5430-timer", }, + { .compatible = "ti,am335x-timer", }, + { .compatible = "ti,am335x-timer-1ms", }, { } }; @@ -170,6 +164,12 @@ static struct device_node * __init omap_get_timer_dt(struct of_device_id *match, if (property && !of_get_property(np, property, NULL)) continue; + if (!property && (of_get_property(np, "ti,timer-alwon", NULL) || + of_get_property(np, "ti,timer-dsp", NULL) || + of_get_property(np, "ti,timer-pwm", NULL) || + of_get_property(np, "ti,timer-secure", NULL))) + continue; + of_add_property(np, &device_disabled); return np; } @@ -214,16 +214,17 @@ static u32 __init omap_dm_timer_get_errata(void) } static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer, - int gptimer_id, - const char *fck_source, - const char *property, - int posted) + const char *fck_source, + const char *property, + const char **timer_name, + int posted) { char name[10]; /* 10 = sizeof("gptXX_Xck0") */ const char *oh_name; struct device_node *np; struct omap_hwmod *oh; struct resource irq, mem; + struct clk *src; int r = 0; if (of_have_populated_dt()) { @@ -243,10 +244,10 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer, of_node_put(np); } else { - if (omap_dm_timer_reserve_systimer(gptimer_id)) + if (omap_dm_timer_reserve_systimer(timer->id)) return -ENODEV; - sprintf(name, "timer%d", gptimer_id); + sprintf(name, "timer%d", timer->id); oh_name = name; } @@ -254,6 +255,8 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer, if (!oh) return -ENODEV; + *timer_name = oh->name; + if (!of_have_populated_dt()) { r = omap_hwmod_get_resource_byname(oh, IORESOURCE_IRQ, NULL, &irq); @@ -276,24 +279,24 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer, /* After the dmtimer is using hwmod these clocks won't be needed */ timer->fclk = clk_get(NULL, omap_hwmod_get_main_clk(oh)); if (IS_ERR(timer->fclk)) - return -ENODEV; + return PTR_ERR(timer->fclk); - /* FIXME: Need to remove hard-coded test on timer ID */ - if (gptimer_id != 12) { - struct clk *src; - - src = clk_get(NULL, fck_source); - if (IS_ERR(src)) { - r = -EINVAL; - } else { - r = clk_set_parent(timer->fclk, src); - if (IS_ERR_VALUE(r)) - pr_warn("%s: %s cannot set source\n", - __func__, oh->name); + src = clk_get(NULL, fck_source); + if (IS_ERR(src)) + return PTR_ERR(src); + + if (clk_get_parent(timer->fclk) != src) { + r = clk_set_parent(timer->fclk, src); + if (r < 0) { + pr_warn("%s: %s cannot set source\n", __func__, + oh->name); clk_put(src); + return r; } } + clk_put(src); + omap_hwmod_setup_one(oh_name); omap_hwmod_enable(oh); __omap_dm_timer_init_regs(timer); @@ -317,6 +320,7 @@ static void __init omap2_gp_clockevent_init(int gptimer_id, { int res; + clkev.id = gptimer_id; clkev.errata = omap_dm_timer_get_errata(); /* @@ -326,8 +330,8 @@ static void __init omap2_gp_clockevent_init(int gptimer_id, */ __omap_dm_timer_override_errata(&clkev, OMAP_TIMER_ERRATA_I103_I767); - res = omap_dm_timer_init_one(&clkev, gptimer_id, fck_source, property, - OMAP_TIMER_POSTED); + res = omap_dm_timer_init_one(&clkev, fck_source, property, + &clockevent_gpt.name, OMAP_TIMER_POSTED); BUG_ON(res); omap2_gp_timer_irq.dev_id = &clkev; @@ -341,8 +345,8 @@ static void __init omap2_gp_clockevent_init(int gptimer_id, 3, /* Timer internal resynch latency */ 0xffffffff); - pr_info("OMAP clockevent source: GPTIMER%d at %lu Hz\n", - gptimer_id, clkev.rate); + pr_info("OMAP clockevent source: %s at %lu Hz\n", clockevent_gpt.name, + clkev.rate); } /* Clocksource code */ @@ -359,7 +363,6 @@ static cycle_t clocksource_read_cycles(struct clocksource *cs) } static struct clocksource clocksource_gpt = { - .name = "gp_timer", .rating = 300, .read = clocksource_read_cycles, .mask = CLOCKSOURCE_MASK(32), @@ -442,13 +445,16 @@ static int __init __maybe_unused omap2_sync32k_clocksource_init(void) } static void __init omap2_gptimer_clocksource_init(int gptimer_id, - const char *fck_source) + const char *fck_source, + const char *property) { int res; + clksrc.id = gptimer_id; clksrc.errata = omap_dm_timer_get_errata(); - res = omap_dm_timer_init_one(&clksrc, gptimer_id, fck_source, NULL, + res = omap_dm_timer_init_one(&clksrc, fck_source, property, + &clocksource_gpt.name, OMAP_TIMER_NONPOSTED); BUG_ON(res); @@ -461,8 +467,8 @@ static void __init omap2_gptimer_clocksource_init(int gptimer_id, pr_err("Could not register clocksource %s\n", clocksource_gpt.name); else - pr_info("OMAP clocksource: GPTIMER%d at %lu Hz\n", - gptimer_id, clksrc.rate); + pr_info("OMAP clocksource: %s at %lu Hz\n", + clocksource_gpt.name, clksrc.rate); } #ifdef CONFIG_SOC_HAS_REALTIME_COUNTER @@ -487,7 +493,7 @@ static void __init realtime_counter_init(void) pr_err("%s: ioremap failed\n", __func__); return; } - sys_clk = clk_get(NULL, "sys_clkin_ck"); + sys_clk = clk_get(NULL, "sys_clkin"); if (IS_ERR(sys_clk)) { pr_err("%s: failed to get system clock handle\n", __func__); iounmap(base); @@ -544,18 +550,19 @@ static inline void __init realtime_counter_init(void) #endif #define OMAP_SYS_GP_TIMER_INIT(name, clkev_nr, clkev_src, clkev_prop, \ - clksrc_nr, clksrc_src) \ + clksrc_nr, clksrc_src, clksrc_prop) \ void __init omap##name##_gptimer_timer_init(void) \ { \ if (omap_clk_init) \ omap_clk_init(); \ omap_dmtimer_init(); \ omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop); \ - omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src); \ + omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src, \ + clksrc_prop); \ } #define OMAP_SYS_32K_TIMER_INIT(name, clkev_nr, clkev_src, clkev_prop, \ - clksrc_nr, clksrc_src) \ + clksrc_nr, clksrc_src, clksrc_prop) \ void __init omap##name##_sync32k_timer_init(void) \ { \ if (omap_clk_init) \ @@ -564,33 +571,35 @@ void __init omap##name##_sync32k_timer_init(void) \ omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop); \ /* Enable the use of clocksource="gp_timer" kernel parameter */ \ if (use_gptimer_clksrc) \ - omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src);\ + omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src, \ + clksrc_prop); \ else \ omap2_sync32k_clocksource_init(); \ } #ifdef CONFIG_ARCH_OMAP2 -OMAP_SYS_32K_TIMER_INIT(2, 1, OMAP2_32K_SOURCE, "ti,timer-alwon", - 2, OMAP2_MPU_SOURCE); +OMAP_SYS_32K_TIMER_INIT(2, 1, "timer_32k_ck", "ti,timer-alwon", + 2, "timer_sys_ck", NULL); #endif /* CONFIG_ARCH_OMAP2 */ #ifdef CONFIG_ARCH_OMAP3 -OMAP_SYS_32K_TIMER_INIT(3, 1, OMAP3_32K_SOURCE, "ti,timer-alwon", - 2, OMAP3_MPU_SOURCE); -OMAP_SYS_32K_TIMER_INIT(3_secure, 12, OMAP3_32K_SOURCE, "ti,timer-secure", - 2, OMAP3_MPU_SOURCE); -OMAP_SYS_GP_TIMER_INIT(3_gp, 1, OMAP3_MPU_SOURCE, "ti,timer-alwon", - 2, OMAP3_MPU_SOURCE); +OMAP_SYS_32K_TIMER_INIT(3, 1, "timer_32k_ck", "ti,timer-alwon", + 2, "timer_sys_ck", NULL); +OMAP_SYS_32K_TIMER_INIT(3_secure, 12, "secure_32k_fck", "ti,timer-secure", + 2, "timer_sys_ck", NULL); #endif /* CONFIG_ARCH_OMAP3 */ -#ifdef CONFIG_SOC_AM33XX -OMAP_SYS_GP_TIMER_INIT(3_am33xx, 1, OMAP4_MPU_SOURCE, "ti,timer-alwon", - 2, OMAP4_MPU_SOURCE); -#endif /* CONFIG_SOC_AM33XX */ +#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX) +OMAP_SYS_GP_TIMER_INIT(3, 2, "timer_sys_ck", NULL, + 1, "timer_sys_ck", "ti,timer-alwon"); +#endif + +#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) +static OMAP_SYS_32K_TIMER_INIT(4, 1, "timer_32k_ck", "ti,timer-alwon", + 2, "sys_clkin_ck", NULL); +#endif #ifdef CONFIG_ARCH_OMAP4 -OMAP_SYS_32K_TIMER_INIT(4, 1, OMAP4_32K_SOURCE, "ti,timer-alwon", - 2, OMAP4_MPU_SOURCE); #ifdef CONFIG_LOCAL_TIMERS static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, OMAP44XX_LOCAL_TWD_BASE, 29); void __init omap4_local_timer_init(void) @@ -601,7 +610,7 @@ void __init omap4_local_timer_init(void) int err; if (of_have_populated_dt()) { - twd_local_timer_of_register(); + clocksource_of_init(); return; } @@ -619,18 +628,12 @@ void __init omap4_local_timer_init(void) #endif /* CONFIG_ARCH_OMAP4 */ #ifdef CONFIG_SOC_OMAP5 -OMAP_SYS_32K_TIMER_INIT(5, 1, OMAP4_32K_SOURCE, "ti,timer-alwon", - 2, OMAP4_MPU_SOURCE); void __init omap5_realtime_timer_init(void) { - int err; - - omap5_sync32k_timer_init(); + omap4_sync32k_timer_init(); realtime_counter_init(); - err = arch_timer_of_register(); - if (err) - pr_err("%s: arch_timer_register failed %d\n", __func__, err); + clocksource_of_init(); } #endif /* CONFIG_SOC_OMAP5 */ diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c index 5706bdccf45e..aa27d7f5cbb7 100644 --- a/arch/arm/mach-omap2/usb-host.c +++ b/arch/arm/mach-omap2/usb-host.c @@ -22,8 +22,12 @@ #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/dma-mapping.h> - -#include <asm/io.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h> +#include <linux/string.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <linux/usb/phy.h> #include "soc.h" #include "omap_device.h" @@ -526,3 +530,155 @@ void __init usbhs_init(struct usbhs_omap_platform_data *pdata) } #endif + +/* Template for PHY regulators */ +static struct fixed_voltage_config hsusb_reg_config = { + /* .supply_name filled later */ + .microvolts = 3300000, + .gpio = -1, /* updated later */ + .startup_delay = 70000, /* 70msec */ + .enable_high = 1, /* updated later */ + .enabled_at_boot = 0, /* keep in RESET */ + /* .init_data filled later */ +}; + +static const char *nop_name = "nop_usb_xceiv"; /* NOP PHY driver */ +static const char *reg_name = "reg-fixed-voltage"; /* Regulator driver */ + +/** + * usbhs_add_regulator - Add a gpio based fixed voltage regulator device + * @name: name for the regulator + * @dev_id: device id of the device this regulator supplies power to + * @dev_supply: supply name that the device expects + * @gpio: GPIO number + * @polarity: 1 - Active high, 0 - Active low + */ +static int usbhs_add_regulator(char *name, char *dev_id, char *dev_supply, + int gpio, int polarity) +{ + struct regulator_consumer_supply *supplies; + struct regulator_init_data *reg_data; + struct fixed_voltage_config *config; + struct platform_device *pdev; + int ret; + + supplies = kzalloc(sizeof(*supplies), GFP_KERNEL); + if (!supplies) + return -ENOMEM; + + supplies->supply = dev_supply; + supplies->dev_name = dev_id; + + reg_data = kzalloc(sizeof(*reg_data), GFP_KERNEL); + if (!reg_data) + return -ENOMEM; + + reg_data->constraints.valid_ops_mask = REGULATOR_CHANGE_STATUS; + reg_data->consumer_supplies = supplies; + reg_data->num_consumer_supplies = 1; + + config = kmemdup(&hsusb_reg_config, sizeof(hsusb_reg_config), + GFP_KERNEL); + if (!config) + return -ENOMEM; + + config->supply_name = name; + config->gpio = gpio; + config->enable_high = polarity; + config->init_data = reg_data; + + /* create a regulator device */ + pdev = kzalloc(sizeof(*pdev), GFP_KERNEL); + if (!pdev) + return -ENOMEM; + + pdev->id = PLATFORM_DEVID_AUTO; + pdev->name = reg_name; + pdev->dev.platform_data = config; + + ret = platform_device_register(pdev); + if (ret) + pr_err("%s: Failed registering regulator %s for %s\n", + __func__, name, dev_id); + + return ret; +} + +int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys) +{ + char *rail_name; + int i, len; + struct platform_device *pdev; + char *phy_id; + + /* the phy_id will be something like "nop_usb_xceiv.1" */ + len = strlen(nop_name) + 3; /* 3 -> ".1" and NULL terminator */ + + for (i = 0; i < num_phys; i++) { + + if (!phy->port) { + pr_err("%s: Invalid port 0. Must start from 1\n", + __func__); + continue; + } + + /* do we need a NOP PHY device ? */ + if (!gpio_is_valid(phy->reset_gpio) && + !gpio_is_valid(phy->vcc_gpio)) + continue; + + /* create a NOP PHY device */ + pdev = kzalloc(sizeof(*pdev), GFP_KERNEL); + if (!pdev) + return -ENOMEM; + + pdev->id = phy->port; + pdev->name = nop_name; + pdev->dev.platform_data = phy->platform_data; + + phy_id = kmalloc(len, GFP_KERNEL); + if (!phy_id) + return -ENOMEM; + + scnprintf(phy_id, len, "nop_usb_xceiv.%d\n", + pdev->id); + + if (platform_device_register(pdev)) { + pr_err("%s: Failed to register device %s\n", + __func__, phy_id); + continue; + } + + usb_bind_phy("ehci-omap.0", phy->port - 1, phy_id); + + /* Do we need RESET regulator ? */ + if (gpio_is_valid(phy->reset_gpio)) { + + rail_name = kmalloc(13, GFP_KERNEL); + if (!rail_name) + return -ENOMEM; + + scnprintf(rail_name, 13, "hsusb%d_reset", phy->port); + + usbhs_add_regulator(rail_name, phy_id, "reset", + phy->reset_gpio, 1); + } + + /* Do we need VCC regulator ? */ + if (gpio_is_valid(phy->vcc_gpio)) { + + rail_name = kmalloc(13, GFP_KERNEL); + if (!rail_name) + return -ENOMEM; + + scnprintf(rail_name, 13, "hsusb%d_vcc", phy->port); + + usbhs_add_regulator(rail_name, phy_id, "vcc", + phy->vcc_gpio, phy->vcc_polarity); + } + + phy++; + } + + return 0; +} diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c index c5a3c6f9504e..e832bc7b8e2d 100644 --- a/arch/arm/mach-omap2/usb-tusb6010.c +++ b/arch/arm/mach-omap2/usb-tusb6010.c @@ -8,6 +8,7 @@ * published by the Free Software Foundation. */ +#include <linux/err.h> #include <linux/string.h> #include <linux/types.h> #include <linux/errno.h> @@ -26,6 +27,24 @@ static u8 async_cs, sync_cs; static unsigned refclk_psec; +static struct gpmc_settings tusb_async = { + .wait_on_read = true, + .wait_on_write = true, + .device_width = GPMC_DEVWIDTH_16BIT, + .mux_add_data = GPMC_MUX_AD, +}; + +static struct gpmc_settings tusb_sync = { + .burst_read = true, + .burst_write = true, + .sync_read = true, + .sync_write = true, + .wait_on_read = true, + .wait_on_write = true, + .burst_len = GPMC_BURST_16, + .device_width = GPMC_DEVWIDTH_16BIT, + .mux_add_data = GPMC_MUX_AD, +}; /* NOTE: timings are from tusb 6010 datasheet Rev 1.8, 12-Sept 2006 */ @@ -37,8 +56,6 @@ static int tusb_set_async_mode(unsigned sysclk_ps) memset(&dev_t, 0, sizeof(dev_t)); - dev_t.mux = true; - dev_t.t_ceasu = 8 * 1000; dev_t.t_avdasu = t_acsnh_advnh - 7000; dev_t.t_ce_avd = 1000; @@ -52,7 +69,7 @@ static int tusb_set_async_mode(unsigned sysclk_ps) dev_t.t_wpl = 300; dev_t.cyc_aavdh_we = 1; - gpmc_calc_timings(&t, &dev_t); + gpmc_calc_timings(&t, &tusb_async, &dev_t); return gpmc_cs_set_timings(async_cs, &t); } @@ -65,10 +82,6 @@ static int tusb_set_sync_mode(unsigned sysclk_ps) memset(&dev_t, 0, sizeof(dev_t)); - dev_t.mux = true; - dev_t.sync_read = true; - dev_t.sync_write = true; - dev_t.clk = 11100; dev_t.t_bacc = 1000; dev_t.t_ces = 1000; @@ -84,7 +97,7 @@ static int tusb_set_sync_mode(unsigned sysclk_ps) dev_t.cyc_wpl = 6; dev_t.t_ce_rdyz = 7000; - gpmc_calc_timings(&t, &dev_t); + gpmc_calc_timings(&t, &tusb_sync, &dev_t); return gpmc_cs_set_timings(sync_cs, &t); } @@ -165,18 +178,12 @@ tusb6010_setup_interface(struct musb_hdrc_platform_data *data, return status; } tusb_resources[0].end = tusb_resources[0].start + 0x9ff; + tusb_async.wait_pin = waitpin; async_cs = async; - gpmc_cs_write_reg(async, GPMC_CS_CONFIG1, - GPMC_CONFIG1_PAGE_LEN(2) - | GPMC_CONFIG1_WAIT_READ_MON - | GPMC_CONFIG1_WAIT_WRITE_MON - | GPMC_CONFIG1_WAIT_PIN_SEL(waitpin) - | GPMC_CONFIG1_READTYPE_ASYNC - | GPMC_CONFIG1_WRITETYPE_ASYNC - | GPMC_CONFIG1_DEVICESIZE_16 - | GPMC_CONFIG1_DEVICETYPE_NOR - | GPMC_CONFIG1_MUXADDDATA); + status = gpmc_cs_program_settings(async_cs, &tusb_async); + if (status < 0) + return status; /* SYNC region, primarily for DMA */ status = gpmc_cs_request(sync, SZ_16M, (unsigned long *) @@ -186,21 +193,12 @@ tusb6010_setup_interface(struct musb_hdrc_platform_data *data, return status; } tusb_resources[1].end = tusb_resources[1].start + 0x9ff; + tusb_sync.wait_pin = waitpin; sync_cs = sync; - gpmc_cs_write_reg(sync, GPMC_CS_CONFIG1, - GPMC_CONFIG1_READMULTIPLE_SUPP - | GPMC_CONFIG1_READTYPE_SYNC - | GPMC_CONFIG1_WRITEMULTIPLE_SUPP - | GPMC_CONFIG1_WRITETYPE_SYNC - | GPMC_CONFIG1_PAGE_LEN(2) - | GPMC_CONFIG1_WAIT_READ_MON - | GPMC_CONFIG1_WAIT_WRITE_MON - | GPMC_CONFIG1_WAIT_PIN_SEL(waitpin) - | GPMC_CONFIG1_DEVICESIZE_16 - | GPMC_CONFIG1_DEVICETYPE_NOR - | GPMC_CONFIG1_MUXADDDATA - /* fclk divider gets set later */ - ); + + status = gpmc_cs_program_settings(sync_cs, &tusb_sync); + if (status < 0) + return status; /* IRQ */ status = gpio_request_one(irq, GPIOF_IN, "TUSB6010 irq"); diff --git a/arch/arm/mach-omap2/usb.h b/arch/arm/mach-omap2/usb.h index 3319f5cf47a3..e7261ebcf7b0 100644 --- a/arch/arm/mach-omap2/usb.h +++ b/arch/arm/mach-omap2/usb.h @@ -53,8 +53,17 @@ #define USBPHY_OTGSESSEND_EN (1 << 20) #define USBPHY_DATA_POLARITY (1 << 23) +struct usbhs_phy_data { + int port; /* 1 indexed port number */ + int reset_gpio; + int vcc_gpio; + bool vcc_polarity; /* 1 active high, 0 active low */ + void *platform_data; +}; + extern void usb_musb_init(struct omap_musb_board_data *board_data); extern void usbhs_init(struct usbhs_omap_platform_data *pdata); +extern int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys); extern void am35x_musb_reset(void); extern void am35x_musb_phy_power(u8 on); diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile index 9e809a7c05c0..45da805fb236 100644 --- a/arch/arm/mach-orion5x/Makefile +++ b/arch/arm/mach-orion5x/Makefile @@ -1,4 +1,4 @@ -obj-y += common.o addr-map.o pci.o irq.o mpp.o +obj-y += common.o pci.o irq.o mpp.o obj-$(CONFIG_MACH_DB88F5281) += db88f5281-setup.o obj-$(CONFIG_MACH_RD88F5182) += rd88f5182-setup.o obj-$(CONFIG_MACH_KUROBOX_PRO) += kurobox_pro-setup.o diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c deleted file mode 100644 index b5efc0fd31cb..000000000000 --- a/arch/arm/mach-orion5x/addr-map.c +++ /dev/null @@ -1,155 +0,0 @@ -/* - * arch/arm/mach-orion5x/addr-map.c - * - * Address map functions for Marvell Orion 5x SoCs - * - * Maintainer: Tzachi Perelstein <tzachi@marvell.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/mbus.h> -#include <linux/io.h> -#include <mach/hardware.h> -#include <plat/addr-map.h> -#include "common.h" - -/* - * The Orion has fully programmable address map. There's a separate address - * map for each of the device _master_ interfaces, e.g. CPU, PCI, PCIe, USB, - * Gigabit Ethernet, DMA/XOR engines, etc. Each interface has its own - * address decode windows that allow it to access any of the Orion resources. - * - * CPU address decoding -- - * Linux assumes that it is the boot loader that already setup the access to - * DDR and internal registers. - * Setup access to PCI and PCIe IO/MEM space is issued by this file. - * Setup access to various devices located on the device bus interface (e.g. - * flashes, RTC, etc) should be issued by machine-setup.c according to - * specific board population (by using orion5x_setup_*_win()). - * - * Non-CPU Masters address decoding -- - * Unlike the CPU, we setup the access from Orion's master interfaces to DDR - * banks only (the typical use case). - * Setup access for each master to DDR is issued by platform device setup. - */ - -/* - * Generic Address Decode Windows bit settings - */ -#define TARGET_DEV_BUS 1 -#define TARGET_PCI 3 -#define TARGET_PCIE 4 -#define TARGET_SRAM 9 -#define ATTR_PCIE_MEM 0x59 -#define ATTR_PCIE_IO 0x51 -#define ATTR_PCIE_WA 0x79 -#define ATTR_PCI_MEM 0x59 -#define ATTR_PCI_IO 0x51 -#define ATTR_DEV_CS0 0x1e -#define ATTR_DEV_CS1 0x1d -#define ATTR_DEV_CS2 0x1b -#define ATTR_DEV_BOOT 0xf -#define ATTR_SRAM 0x0 - -static int __initdata win_alloc_count; - -static int __init cpu_win_can_remap(const struct orion_addr_map_cfg *cfg, - const int win) -{ - u32 dev, rev; - - orion5x_pcie_id(&dev, &rev); - if ((dev == MV88F5281_DEV_ID && win < 4) - || (dev == MV88F5182_DEV_ID && win < 2) - || (dev == MV88F5181_DEV_ID && win < 2) - || (dev == MV88F6183_DEV_ID && win < 4)) - return 1; - - return 0; -} - -/* - * Description of the windows needed by the platform code - */ -static struct orion_addr_map_cfg addr_map_cfg __initdata = { - .num_wins = 8, - .cpu_win_can_remap = cpu_win_can_remap, - .bridge_virt_base = ORION5X_BRIDGE_VIRT_BASE, -}; - -static const struct __initdata orion_addr_map_info addr_map_info[] = { - /* - * Setup windows for PCI+PCIe IO+MEM space. - */ - { 0, ORION5X_PCIE_IO_PHYS_BASE, ORION5X_PCIE_IO_SIZE, - TARGET_PCIE, ATTR_PCIE_IO, ORION5X_PCIE_IO_BUS_BASE - }, - { 1, ORION5X_PCI_IO_PHYS_BASE, ORION5X_PCI_IO_SIZE, - TARGET_PCI, ATTR_PCI_IO, ORION5X_PCI_IO_BUS_BASE - }, - { 2, ORION5X_PCIE_MEM_PHYS_BASE, ORION5X_PCIE_MEM_SIZE, - TARGET_PCIE, ATTR_PCIE_MEM, -1 - }, - { 3, ORION5X_PCI_MEM_PHYS_BASE, ORION5X_PCI_MEM_SIZE, - TARGET_PCI, ATTR_PCI_MEM, -1 - }, - /* End marker */ - { -1, 0, 0, 0, 0, 0 } -}; - -void __init orion5x_setup_cpu_mbus_bridge(void) -{ - /* - * Disable, clear and configure windows. - */ - orion_config_wins(&addr_map_cfg, addr_map_info); - win_alloc_count = 4; - - /* - * Setup MBUS dram target info. - */ - orion_setup_cpu_mbus_target(&addr_map_cfg, - (void __iomem *) ORION5X_DDR_WINDOW_CPU_BASE); -} - -void __init orion5x_setup_dev_boot_win(u32 base, u32 size) -{ - orion_setup_cpu_win(&addr_map_cfg, win_alloc_count++, base, size, - TARGET_DEV_BUS, ATTR_DEV_BOOT, -1); -} - -void __init orion5x_setup_dev0_win(u32 base, u32 size) -{ - orion_setup_cpu_win(&addr_map_cfg, win_alloc_count++, base, size, - TARGET_DEV_BUS, ATTR_DEV_CS0, -1); -} - -void __init orion5x_setup_dev1_win(u32 base, u32 size) -{ - orion_setup_cpu_win(&addr_map_cfg, win_alloc_count++, base, size, - TARGET_DEV_BUS, ATTR_DEV_CS1, -1); -} - -void __init orion5x_setup_dev2_win(u32 base, u32 size) -{ - orion_setup_cpu_win(&addr_map_cfg, win_alloc_count++, base, size, - TARGET_DEV_BUS, ATTR_DEV_CS2, -1); -} - -void __init orion5x_setup_pcie_wa_win(u32 base, u32 size) -{ - orion_setup_cpu_win(&addr_map_cfg, win_alloc_count++, base, size, - TARGET_PCIE, ATTR_PCIE_WA, -1); -} - -void __init orion5x_setup_sram_win(void) -{ - orion_setup_cpu_win(&addr_map_cfg, win_alloc_count++, - ORION5X_SRAM_PHYS_BASE, ORION5X_SRAM_SIZE, - TARGET_SRAM, ATTR_SRAM, -1); -} diff --git a/arch/arm/mach-orion5x/board-dt.c b/arch/arm/mach-orion5x/board-dt.c index 35a8014529ca..b91002ca92f3 100644 --- a/arch/arm/mach-orion5x/board-dt.c +++ b/arch/arm/mach-orion5x/board-dt.c @@ -14,6 +14,7 @@ #include <linux/init.h> #include <linux/of.h> #include <linux/of_platform.h> +#include <linux/cpu.h> #include <asm/system_misc.h> #include <asm/mach/arch.h> #include <mach/orion5x.h> @@ -41,7 +42,7 @@ static void __init orion5x_dt_init(void) /* * Setup Orion address map */ - orion5x_setup_cpu_mbus_bridge(); + orion5x_setup_wins(); /* Setup root of clk tree */ clk_init(); @@ -52,7 +53,7 @@ static void __init orion5x_dt_init(void) */ if (dev == MV88F5281_DEV_ID && rev == MV88F5281_REV_D0) { printk(KERN_INFO "Orion: Applying 5281 D0 WFI workaround.\n"); - disable_hlt(); + cpu_idle_poll_ctrl(true); } if (of_machine_is_compatible("lacie,ethernet-disk-mini-v2")) diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index d068f1431c40..b97fd672e89d 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -19,6 +19,7 @@ #include <linux/ata_platform.h> #include <linux/delay.h> #include <linux/clk-provider.h> +#include <linux/cpu.h> #include <net/dsa.h> #include <asm/page.h> #include <asm/setup.h> @@ -34,7 +35,6 @@ #include <linux/platform_data/usb-ehci-orion.h> #include <plat/time.h> #include <plat/common.h> -#include <plat/addr-map.h> #include "common.h" /***************************************************************************** @@ -174,7 +174,8 @@ void __init orion5x_xor_init(void) ****************************************************************************/ static void __init orion5x_crypto_init(void) { - orion5x_setup_sram_win(); + mvebu_mbus_add_window("sram", ORION5X_SRAM_PHYS_BASE, + ORION5X_SRAM_SIZE); orion_crypto_init(ORION5X_CRYPTO_PHYS_BASE, ORION5X_SRAM_PHYS_BASE, SZ_8K, IRQ_ORION5X_CESA); } @@ -193,6 +194,9 @@ void __init orion5x_wdt_init(void) ****************************************************************************/ void __init orion5x_init_early(void) { + u32 rev, dev; + const char *mbus_soc_name; + orion_time_set_base(TIMER_VIRT_BASE); /* @@ -201,6 +205,46 @@ void __init orion5x_init_early(void) * the allocations won't fail. */ init_dma_coherent_pool_size(SZ_1M); + + /* Initialize the MBUS driver */ + orion5x_pcie_id(&dev, &rev); + if (dev == MV88F5281_DEV_ID) + mbus_soc_name = "marvell,orion5x-88f5281-mbus"; + else if (dev == MV88F5182_DEV_ID) + mbus_soc_name = "marvell,orion5x-88f5182-mbus"; + else if (dev == MV88F5181_DEV_ID) + mbus_soc_name = "marvell,orion5x-88f5181-mbus"; + else if (dev == MV88F6183_DEV_ID) + mbus_soc_name = "marvell,orion5x-88f6183-mbus"; + else + mbus_soc_name = NULL; + mvebu_mbus_init(mbus_soc_name, ORION5X_BRIDGE_WINS_BASE, + ORION5X_BRIDGE_WINS_SZ, + ORION5X_DDR_WINS_BASE, ORION5X_DDR_WINS_SZ); +} + +void orion5x_setup_wins(void) +{ + /* + * The PCIe windows will no longer be statically allocated + * here once Orion5x is migrated to the pci-mvebu driver. + */ + mvebu_mbus_add_window_remap_flags("pcie0.0", ORION5X_PCIE_IO_PHYS_BASE, + ORION5X_PCIE_IO_SIZE, + ORION5X_PCIE_IO_BUS_BASE, + MVEBU_MBUS_PCI_IO); + mvebu_mbus_add_window_remap_flags("pcie0.0", ORION5X_PCIE_MEM_PHYS_BASE, + ORION5X_PCIE_MEM_SIZE, + MVEBU_MBUS_NO_REMAP, + MVEBU_MBUS_PCI_MEM); + mvebu_mbus_add_window_remap_flags("pci0.0", ORION5X_PCI_IO_PHYS_BASE, + ORION5X_PCI_IO_SIZE, + ORION5X_PCI_IO_BUS_BASE, + MVEBU_MBUS_PCI_IO); + mvebu_mbus_add_window_remap_flags("pci0.0", ORION5X_PCI_MEM_PHYS_BASE, + ORION5X_PCI_MEM_SIZE, + MVEBU_MBUS_NO_REMAP, + MVEBU_MBUS_PCI_MEM); } int orion5x_tclk; @@ -282,7 +326,7 @@ void __init orion5x_init(void) /* * Setup Orion address map */ - orion5x_setup_cpu_mbus_bridge(); + orion5x_setup_wins(); /* Setup root of clk tree */ clk_init(); @@ -293,7 +337,7 @@ void __init orion5x_init(void) */ if (dev == MV88F5281_DEV_ID && rev == MV88F5281_REV_D0) { printk(KERN_INFO "Orion: Applying 5281 D0 WFI workaround.\n"); - disable_hlt(); + cpu_idle_poll_ctrl(true); } /* diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h index e60345760283..cdaa01f3d186 100644 --- a/arch/arm/mach-orion5x/common.h +++ b/arch/arm/mach-orion5x/common.h @@ -17,18 +17,7 @@ void clk_init(void); extern int orion5x_tclk; extern void orion5x_timer_init(void); -/* - * Enumerations and functions for Orion windows mapping. Used by Orion core - * functions to map its interfaces and by the machine-setup to map its on- - * board devices. Details in /mach-orion/addr-map.c - */ -void orion5x_setup_cpu_mbus_bridge(void); -void orion5x_setup_dev_boot_win(u32 base, u32 size); -void orion5x_setup_dev0_win(u32 base, u32 size); -void orion5x_setup_dev1_win(u32 base, u32 size); -void orion5x_setup_dev2_win(u32 base, u32 size); -void orion5x_setup_pcie_wa_win(u32 base, u32 size); -void orion5x_setup_sram_win(void); +void orion5x_setup_wins(void); void orion5x_ehci0_init(void); void orion5x_ehci1_init(void); diff --git a/arch/arm/mach-orion5x/d2net-setup.c b/arch/arm/mach-orion5x/d2net-setup.c index 57d0af74874d..16c88bbabc98 100644 --- a/arch/arm/mach-orion5x/d2net-setup.c +++ b/arch/arm/mach-orion5x/d2net-setup.c @@ -317,8 +317,8 @@ static void __init d2net_init(void) d2net_sata_power_init(); orion5x_sata_init(&d2net_sata_data); - orion5x_setup_dev_boot_win(D2NET_NOR_BOOT_BASE, - D2NET_NOR_BOOT_SIZE); + mvebu_mbus_add_window("devbus-boot", D2NET_NOR_BOOT_BASE, + D2NET_NOR_BOOT_SIZE); platform_device_register(&d2net_nor_flash); platform_device_register(&d2net_gpio_buttons); diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c index 76665640087b..4e1263da38bb 100644 --- a/arch/arm/mach-orion5x/db88f5281-setup.c +++ b/arch/arm/mach-orion5x/db88f5281-setup.c @@ -340,16 +340,19 @@ static void __init db88f5281_init(void) orion5x_uart0_init(); orion5x_uart1_init(); - orion5x_setup_dev_boot_win(DB88F5281_NOR_BOOT_BASE, - DB88F5281_NOR_BOOT_SIZE); + mvebu_mbus_add_window("devbus-boot", DB88F5281_NOR_BOOT_BASE, + DB88F5281_NOR_BOOT_SIZE); platform_device_register(&db88f5281_boot_flash); - orion5x_setup_dev0_win(DB88F5281_7SEG_BASE, DB88F5281_7SEG_SIZE); + mvebu_mbus_add_window("devbus-cs0", DB88F5281_7SEG_BASE, + DB88F5281_7SEG_SIZE); - orion5x_setup_dev1_win(DB88F5281_NOR_BASE, DB88F5281_NOR_SIZE); + mvebu_mbus_add_window("devbus-cs1", DB88F5281_NOR_BASE, + DB88F5281_NOR_SIZE); platform_device_register(&db88f5281_nor_flash); - orion5x_setup_dev2_win(DB88F5281_NAND_BASE, DB88F5281_NAND_SIZE); + mvebu_mbus_add_window("devbus-cs2", DB88F5281_NAND_BASE, + DB88F5281_NAND_SIZE); platform_device_register(&db88f5281_nand_flash); i2c_register_board_info(0, &db88f5281_i2c_rtc, 1); diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c index 6eb1732757fd..9e6baf581ed3 100644 --- a/arch/arm/mach-orion5x/dns323-setup.c +++ b/arch/arm/mach-orion5x/dns323-setup.c @@ -611,7 +611,8 @@ static void __init dns323_init(void) /* setup flash mapping * CS3 holds a 8 MB Spansion S29GL064M90TFIR4 */ - orion5x_setup_dev_boot_win(DNS323_NOR_BOOT_BASE, DNS323_NOR_BOOT_SIZE); + mvebu_mbus_add_window("devbus-boot", DNS323_NOR_BOOT_BASE, + DNS323_NOR_BOOT_SIZE); platform_device_register(&dns323_nor_flash); /* Sort out LEDs, Buttons and i2c devices */ diff --git a/arch/arm/mach-orion5x/edmini_v2-setup.c b/arch/arm/mach-orion5x/edmini_v2-setup.c index d675e727803d..147615510dd0 100644 --- a/arch/arm/mach-orion5x/edmini_v2-setup.c +++ b/arch/arm/mach-orion5x/edmini_v2-setup.c @@ -154,8 +154,8 @@ void __init edmini_v2_init(void) orion5x_ehci0_init(); orion5x_eth_init(&edmini_v2_eth_data); - orion5x_setup_dev_boot_win(EDMINI_V2_NOR_BOOT_BASE, - EDMINI_V2_NOR_BOOT_SIZE); + mvebu_mbus_add_window("devbus-boot", EDMINI_V2_NOR_BOOT_BASE, + EDMINI_V2_NOR_BOOT_SIZE); platform_device_register(&edmini_v2_nor_flash); pr_notice("edmini_v2: USB device port, flash write and power-off " diff --git a/arch/arm/mach-orion5x/include/mach/orion5x.h b/arch/arm/mach-orion5x/include/mach/orion5x.h index d265f5484a8e..b78ff3248868 100644 --- a/arch/arm/mach-orion5x/include/mach/orion5x.h +++ b/arch/arm/mach-orion5x/include/mach/orion5x.h @@ -66,8 +66,10 @@ * Orion Registers Map ******************************************************************************/ +#define ORION5X_DDR_PHYS_BASE (ORION5X_REGS_PHYS_BASE + 0x00000) +#define ORION5X_DDR_WINS_BASE (ORION5X_DDR_PHYS_BASE + 0x1500) +#define ORION5X_DDR_WINS_SZ (0x10) #define ORION5X_DDR_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0x00000) -#define ORION5X_DDR_WINDOW_CPU_BASE (ORION5X_DDR_VIRT_BASE + 0x1500) #define ORION5X_DEV_BUS_PHYS_BASE (ORION5X_REGS_PHYS_BASE + 0x10000) #define ORION5X_DEV_BUS_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0x10000) #define ORION5X_DEV_BUS_REG(x) (ORION5X_DEV_BUS_VIRT_BASE + (x)) @@ -81,6 +83,8 @@ #define ORION5X_BRIDGE_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0x20000) #define ORION5X_BRIDGE_PHYS_BASE (ORION5X_REGS_PHYS_BASE + 0x20000) +#define ORION5X_BRIDGE_WINS_BASE (ORION5X_BRIDGE_PHYS_BASE) +#define ORION5X_BRIDGE_WINS_SZ (0x80) #define ORION5X_PCI_VIRT_BASE (ORION5X_REGS_VIRT_BASE + 0x30000) diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c index b98403526218..aae10e4a917c 100644 --- a/arch/arm/mach-orion5x/kurobox_pro-setup.c +++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c @@ -359,13 +359,13 @@ static void __init kurobox_pro_init(void) orion5x_uart1_init(); orion5x_xor_init(); - orion5x_setup_dev_boot_win(KUROBOX_PRO_NOR_BOOT_BASE, - KUROBOX_PRO_NOR_BOOT_SIZE); + mvebu_mbus_add_window("devbus-boot", KUROBOX_PRO_NOR_BOOT_BASE, + KUROBOX_PRO_NOR_BOOT_SIZE); platform_device_register(&kurobox_pro_nor_flash); if (machine_is_kurobox_pro()) { - orion5x_setup_dev0_win(KUROBOX_PRO_NAND_BASE, - KUROBOX_PRO_NAND_SIZE); + mvebu_mbus_add_window("devbus-cs0", KUROBOX_PRO_NAND_BASE, + KUROBOX_PRO_NAND_SIZE); platform_device_register(&kurobox_pro_nand_flash); } diff --git a/arch/arm/mach-orion5x/ls-chl-setup.c b/arch/arm/mach-orion5x/ls-chl-setup.c index 044da5b6a6ae..24f4e14e5893 100644 --- a/arch/arm/mach-orion5x/ls-chl-setup.c +++ b/arch/arm/mach-orion5x/ls-chl-setup.c @@ -294,8 +294,8 @@ static void __init lschl_init(void) orion5x_uart0_init(); orion5x_xor_init(); - orion5x_setup_dev_boot_win(LSCHL_NOR_BOOT_BASE, - LSCHL_NOR_BOOT_SIZE); + mvebu_mbus_add_window("devbus-boot", LSCHL_NOR_BOOT_BASE, + LSCHL_NOR_BOOT_SIZE); platform_device_register(&lschl_nor_flash); platform_device_register(&lschl_leds); diff --git a/arch/arm/mach-orion5x/ls_hgl-setup.c b/arch/arm/mach-orion5x/ls_hgl-setup.c index d49f93423f52..fc653bb41e78 100644 --- a/arch/arm/mach-orion5x/ls_hgl-setup.c +++ b/arch/arm/mach-orion5x/ls_hgl-setup.c @@ -243,8 +243,8 @@ static void __init ls_hgl_init(void) orion5x_uart0_init(); orion5x_xor_init(); - orion5x_setup_dev_boot_win(LS_HGL_NOR_BOOT_BASE, - LS_HGL_NOR_BOOT_SIZE); + mvebu_mbus_add_window("devbus-boot", LS_HGL_NOR_BOOT_BASE, + LS_HGL_NOR_BOOT_SIZE); platform_device_register(&ls_hgl_nor_flash); platform_device_register(&ls_hgl_button_device); diff --git a/arch/arm/mach-orion5x/lsmini-setup.c b/arch/arm/mach-orion5x/lsmini-setup.c index 8e3965c6c0fe..18e66e617dc2 100644 --- a/arch/arm/mach-orion5x/lsmini-setup.c +++ b/arch/arm/mach-orion5x/lsmini-setup.c @@ -244,8 +244,8 @@ static void __init lsmini_init(void) orion5x_uart0_init(); orion5x_xor_init(); - orion5x_setup_dev_boot_win(LSMINI_NOR_BOOT_BASE, - LSMINI_NOR_BOOT_SIZE); + mvebu_mbus_add_window("devbus-boot", LSMINI_NOR_BOOT_BASE, + LSMINI_NOR_BOOT_SIZE); platform_device_register(&lsmini_nor_flash); platform_device_register(&lsmini_button_device); diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c index 0ec94a1f2b16..827acbafc9dc 100644 --- a/arch/arm/mach-orion5x/mss2-setup.c +++ b/arch/arm/mach-orion5x/mss2-setup.c @@ -241,7 +241,8 @@ static void __init mss2_init(void) orion5x_uart0_init(); orion5x_xor_init(); - orion5x_setup_dev_boot_win(MSS2_NOR_BOOT_BASE, MSS2_NOR_BOOT_SIZE); + mvebu_mbus_add_window("devbus-boot", MSS2_NOR_BOOT_BASE, + MSS2_NOR_BOOT_SIZE); platform_device_register(&mss2_nor_flash); platform_device_register(&mss2_button_device); diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c index 18143f2a9093..92600ae2b4b6 100644 --- a/arch/arm/mach-orion5x/mv2120-setup.c +++ b/arch/arm/mach-orion5x/mv2120-setup.c @@ -204,7 +204,8 @@ static void __init mv2120_init(void) orion5x_uart0_init(); orion5x_xor_init(); - orion5x_setup_dev_boot_win(MV2120_NOR_BOOT_BASE, MV2120_NOR_BOOT_SIZE); + mvebu_mbus_add_window("devbus-boot", MV2120_NOR_BOOT_BASE, + MV2120_NOR_BOOT_SIZE); platform_device_register(&mv2120_nor_flash); platform_device_register(&mv2120_button_device); diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c index 282e503b003e..dd0641a0d074 100644 --- a/arch/arm/mach-orion5x/net2big-setup.c +++ b/arch/arm/mach-orion5x/net2big-setup.c @@ -397,8 +397,8 @@ static void __init net2big_init(void) net2big_sata_power_init(); orion5x_sata_init(&net2big_sata_data); - orion5x_setup_dev_boot_win(NET2BIG_NOR_BOOT_BASE, - NET2BIG_NOR_BOOT_SIZE); + mvebu_mbus_add_window("devbus-boot", NET2BIG_NOR_BOOT_BASE, + NET2BIG_NOR_BOOT_SIZE); platform_device_register(&net2big_nor_flash); platform_device_register(&net2big_gpio_buttons); diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c index d9c7c3bf0d9c..503368023bb1 100644 --- a/arch/arm/mach-orion5x/pci.c +++ b/arch/arm/mach-orion5x/pci.c @@ -157,8 +157,11 @@ static int __init pcie_setup(struct pci_sys_data *sys) if (dev == MV88F5181_DEV_ID || dev == MV88F5182_DEV_ID) { printk(KERN_NOTICE "Applying Orion-1/Orion-NAS PCIe config " "read transaction workaround\n"); - orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE, - ORION5X_PCIE_WA_SIZE); + mvebu_mbus_add_window_remap_flags("pcie0.0", + ORION5X_PCIE_WA_PHYS_BASE, + ORION5X_PCIE_WA_SIZE, + MVEBU_MBUS_NO_REMAP, + MVEBU_MBUS_PCI_WA); pcie_ops.read = pcie_rd_conf_wa; } @@ -402,8 +405,9 @@ static void __init orion5x_pci_master_slave_enable(void) orion5x_pci_hw_wr_conf(bus_nr, 0, func, reg, 4, val | 0x7); } -static void __init orion5x_setup_pci_wins(struct mbus_dram_target_info *dram) +static void __init orion5x_setup_pci_wins(void) { + const struct mbus_dram_target_info *dram = mv_mbus_dram_info(); u32 win_enable; int bus; int i; @@ -420,7 +424,7 @@ static void __init orion5x_setup_pci_wins(struct mbus_dram_target_info *dram) bus = orion5x_pci_local_bus_nr(); for (i = 0; i < dram->num_cs; i++) { - struct mbus_dram_window *cs = dram->cs + i; + const struct mbus_dram_window *cs = dram->cs + i; u32 func = PCI_CONF_FUNC_BAR_CS(cs->cs_index); u32 reg; u32 val; @@ -467,7 +471,7 @@ static int __init pci_setup(struct pci_sys_data *sys) /* * Point PCI unit MBUS decode windows to DRAM space. */ - orion5x_setup_pci_wins(&orion_mbus_dram_info); + orion5x_setup_pci_wins(); /* * Master + Slave enable diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c index d6e72f672afb..1c4498bf650a 100644 --- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c +++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c @@ -123,8 +123,8 @@ static void __init rd88f5181l_fxo_init(void) orion5x_eth_switch_init(&rd88f5181l_fxo_switch_plat_data, NO_IRQ); orion5x_uart0_init(); - orion5x_setup_dev_boot_win(RD88F5181L_FXO_NOR_BOOT_BASE, - RD88F5181L_FXO_NOR_BOOT_SIZE); + mvebu_mbus_add_window("devbus-boot", RD88F5181L_FXO_NOR_BOOT_BASE, + RD88F5181L_FXO_NOR_BOOT_SIZE); platform_device_register(&rd88f5181l_fxo_nor_boot_flash); } diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c index c8b7913310e5..adabe34c4fc6 100644 --- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c +++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c @@ -130,8 +130,8 @@ static void __init rd88f5181l_ge_init(void) orion5x_i2c_init(); orion5x_uart0_init(); - orion5x_setup_dev_boot_win(RD88F5181L_GE_NOR_BOOT_BASE, - RD88F5181L_GE_NOR_BOOT_SIZE); + mvebu_mbus_add_window("devbus-boot", RD88F5181L_GE_NOR_BOOT_BASE, + RD88F5181L_GE_NOR_BOOT_SIZE); platform_device_register(&rd88f5181l_ge_nor_boot_flash); i2c_register_board_info(0, &rd88f5181l_ge_i2c_rtc, 1); diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c index f9e156725d7c..66e77ec91532 100644 --- a/arch/arm/mach-orion5x/rd88f5182-setup.c +++ b/arch/arm/mach-orion5x/rd88f5182-setup.c @@ -264,10 +264,11 @@ static void __init rd88f5182_init(void) orion5x_uart0_init(); orion5x_xor_init(); - orion5x_setup_dev_boot_win(RD88F5182_NOR_BOOT_BASE, - RD88F5182_NOR_BOOT_SIZE); + mvebu_mbus_add_window("devbus-boot", RD88F5182_NOR_BOOT_BASE, + RD88F5182_NOR_BOOT_SIZE); - orion5x_setup_dev1_win(RD88F5182_NOR_BASE, RD88F5182_NOR_SIZE); + mvebu_mbus_add_window("devbus-cs1", RD88F5182_NOR_BASE, + RD88F5182_NOR_SIZE); platform_device_register(&rd88f5182_nor_flash); platform_device_register(&rd88f5182_gpio_leds); diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c index acc0877ec1c9..a0bfa53e7556 100644 --- a/arch/arm/mach-orion5x/terastation_pro2-setup.c +++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c @@ -329,8 +329,8 @@ static void __init tsp2_init(void) /* * Configure peripherals. */ - orion5x_setup_dev_boot_win(TSP2_NOR_BOOT_BASE, - TSP2_NOR_BOOT_SIZE); + mvebu_mbus_add_window("devbus-boot", TSP2_NOR_BOOT_BASE, + TSP2_NOR_BOOT_SIZE); platform_device_register(&tsp2_nor_flash); orion5x_ehci0_init(); diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c index 9c17f0c2b488..80174f0f168e 100644 --- a/arch/arm/mach-orion5x/ts209-setup.c +++ b/arch/arm/mach-orion5x/ts209-setup.c @@ -286,8 +286,8 @@ static void __init qnap_ts209_init(void) /* * Configure peripherals. */ - orion5x_setup_dev_boot_win(QNAP_TS209_NOR_BOOT_BASE, - QNAP_TS209_NOR_BOOT_SIZE); + mvebu_mbus_add_window("devbus-boot", QNAP_TS209_NOR_BOOT_BASE, + QNAP_TS209_NOR_BOOT_SIZE); platform_device_register(&qnap_ts209_nor_flash); orion5x_ehci0_init(); diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c index 8cc5ab6c503e..92592790d6da 100644 --- a/arch/arm/mach-orion5x/ts409-setup.c +++ b/arch/arm/mach-orion5x/ts409-setup.c @@ -277,8 +277,8 @@ static void __init qnap_ts409_init(void) /* * Configure peripherals. */ - orion5x_setup_dev_boot_win(QNAP_TS409_NOR_BOOT_BASE, - QNAP_TS409_NOR_BOOT_SIZE); + mvebu_mbus_add_window("devbus-boot", QNAP_TS409_NOR_BOOT_BASE, + QNAP_TS409_NOR_BOOT_SIZE); platform_device_register(&qnap_ts409_nor_flash); orion5x_ehci0_init(); diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c index 66552ca7e05d..6b84863c018d 100644 --- a/arch/arm/mach-orion5x/wnr854t-setup.c +++ b/arch/arm/mach-orion5x/wnr854t-setup.c @@ -127,8 +127,8 @@ static void __init wnr854t_init(void) orion5x_eth_switch_init(&wnr854t_switch_plat_data, NO_IRQ); orion5x_uart0_init(); - orion5x_setup_dev_boot_win(WNR854T_NOR_BOOT_BASE, - WNR854T_NOR_BOOT_SIZE); + mvebu_mbus_add_window("devbus-boot", WNR854T_NOR_BOOT_BASE, + WNR854T_NOR_BOOT_SIZE); platform_device_register(&wnr854t_nor_flash); } diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c index 2c5408e2e689..fae684bc54f2 100644 --- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c +++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c @@ -213,8 +213,8 @@ static void __init wrt350n_v2_init(void) orion5x_eth_switch_init(&wrt350n_v2_switch_plat_data, NO_IRQ); orion5x_uart0_init(); - orion5x_setup_dev_boot_win(WRT350N_V2_NOR_BOOT_BASE, - WRT350N_V2_NOR_BOOT_SIZE); + mvebu_mbus_add_window("devbus-boot", WRT350N_V2_NOR_BOOT_BASE, + WRT350N_V2_NOR_BOOT_SIZE); platform_device_register(&wrt350n_v2_nor_flash); platform_device_register(&wrt350n_v2_leds); platform_device_register(&wrt350n_v2_button_device); diff --git a/arch/arm/mach-prima2/Kconfig b/arch/arm/mach-prima2/Kconfig index 4f7379fe01e2..80ca974b2f82 100644 --- a/arch/arm/mach-prima2/Kconfig +++ b/arch/arm/mach-prima2/Kconfig @@ -1,6 +1,26 @@ +config ARCH_SIRF + bool "CSR SiRF" if ARCH_MULTI_V7 + select ARCH_REQUIRE_GPIOLIB + select GENERIC_CLOCKEVENTS + select GENERIC_IRQ_CHIP + select MIGHT_HAVE_CACHE_L2X0 + select NO_IOPORT + select PINCTRL + select PINCTRL_SIRF + help + Support for CSR SiRFprimaII/Marco/Polo platforms + if ARCH_SIRF -menu "CSR SiRF primaII/Marco/Polo Specific Features" +menu "CSR SiRF atlas6/primaII/Marco/Polo Specific Features" + +config ARCH_ATLAS6 + bool "CSR SiRFSoC ATLAS6 ARM Cortex A9 Platform" + default y + select CPU_V7 + select SIRF_IRQ + help + Support for CSR SiRFSoC ARM Cortex A9 Platform config ARCH_PRIMA2 bool "CSR SiRFSoC PRIMA2 ARM Cortex A9 Platform" @@ -16,6 +36,7 @@ config ARCH_MARCO default y select ARM_GIC select CPU_V7 + select HAVE_ARM_SCU if SMP select HAVE_SMP select SMP_ON_UP help diff --git a/arch/arm/mach-prima2/Makefile b/arch/arm/mach-prima2/Makefile index bfe360cbd177..7a6b4a323125 100644 --- a/arch/arm/mach-prima2/Makefile +++ b/arch/arm/mach-prima2/Makefile @@ -4,8 +4,7 @@ obj-y += rtciobrg.o obj-$(CONFIG_DEBUG_LL) += lluart.o obj-$(CONFIG_CACHE_L2X0) += l2x0.o obj-$(CONFIG_SUSPEND) += pm.o sleep.o -obj-$(CONFIG_SIRF_IRQ) += irq.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o -obj-$(CONFIG_ARCH_PRIMA2) += timer-prima2.o -obj-$(CONFIG_ARCH_MARCO) += timer-marco.o + +CFLAGS_hotplug.o += -march=armv7-a diff --git a/arch/arm/mach-prima2/common.c b/arch/arm/mach-prima2/common.c index 2d57aa479a7b..4f94cd87972a 100644 --- a/arch/arm/mach-prima2/common.c +++ b/arch/arm/mach-prima2/common.c @@ -6,6 +6,7 @@ * Licensed under GPLv2 or later. */ +#include <linux/clocksource.h> #include <linux/init.h> #include <linux/kernel.h> #include <linux/irqchip.h> @@ -31,12 +32,38 @@ void __init sirfsoc_init_late(void) sirfsoc_pm_init(); } +static __init void sirfsoc_init_time(void) +{ + /* initialize clocking early, we want to set the OS timer */ + sirfsoc_of_clk_init(); + clocksource_of_init(); +} + static __init void sirfsoc_map_io(void) { sirfsoc_map_lluart(); sirfsoc_map_scu(); } +#ifdef CONFIG_ARCH_ATLAS6 +static const char *atlas6_dt_match[] __initdata = { + "sirf,atlas6", + NULL +}; + +DT_MACHINE_START(ATLAS6_DT, "Generic ATLAS6 (Flattened Device Tree)") + /* Maintainer: Barry Song <baohua.song@csr.com> */ + .nr_irqs = 128, + .map_io = sirfsoc_map_io, + .init_irq = irqchip_init, + .init_time = sirfsoc_init_time, + .init_machine = sirfsoc_mach_init, + .init_late = sirfsoc_init_late, + .dt_compat = atlas6_dt_match, + .restart = sirfsoc_restart, +MACHINE_END +#endif + #ifdef CONFIG_ARCH_PRIMA2 static const char *prima2_dt_match[] __initdata = { "sirf,prima2", @@ -45,12 +72,10 @@ static const char *prima2_dt_match[] __initdata = { DT_MACHINE_START(PRIMA2_DT, "Generic PRIMA2 (Flattened Device Tree)") /* Maintainer: Barry Song <baohua.song@csr.com> */ + .nr_irqs = 128, .map_io = sirfsoc_map_io, - .init_irq = sirfsoc_of_irq_init, - .init_time = sirfsoc_prima2_timer_init, -#ifdef CONFIG_MULTI_IRQ_HANDLER - .handle_irq = sirfsoc_handle_irq, -#endif + .init_irq = irqchip_init, + .init_time = sirfsoc_init_time, .dma_zone_size = SZ_256M, .init_machine = sirfsoc_mach_init, .init_late = sirfsoc_init_late, @@ -70,7 +95,7 @@ DT_MACHINE_START(MARCO_DT, "Generic MARCO (Flattened Device Tree)") .smp = smp_ops(sirfsoc_smp_ops), .map_io = sirfsoc_map_io, .init_irq = irqchip_init, - .init_time = sirfsoc_marco_timer_init, + .init_time = sirfsoc_init_time, .init_machine = sirfsoc_mach_init, .init_late = sirfsoc_init_late, .dt_compat = marco_dt_match, diff --git a/arch/arm/mach-prima2/common.h b/arch/arm/mach-prima2/common.h index b7c26b62e4a7..81135cd88e54 100644 --- a/arch/arm/mach-prima2/common.h +++ b/arch/arm/mach-prima2/common.h @@ -13,8 +13,8 @@ #include <asm/mach/time.h> #include <asm/exception.h> -extern void sirfsoc_prima2_timer_init(void); -extern void sirfsoc_marco_timer_init(void); +#define SIRFSOC_VA_BASE _AC(0xFEC00000, UL) +#define SIRFSOC_VA(x) (SIRFSOC_VA_BASE + ((x) & 0x00FFF000)) extern struct smp_operations sirfsoc_smp_ops; extern void sirfsoc_secondary_startup(void); diff --git a/arch/arm/mach-prima2/hotplug.c b/arch/arm/mach-prima2/hotplug.c index f4b17cbababd..0ab2f8bae28e 100644 --- a/arch/arm/mach-prima2/hotplug.c +++ b/arch/arm/mach-prima2/hotplug.c @@ -10,13 +10,10 @@ #include <linux/errno.h> #include <linux/smp.h> -#include <asm/cacheflush.h> #include <asm/smp_plat.h> static inline void platform_do_lowpower(unsigned int cpu) { - flush_cache_all(); - /* we put the platform to just WFI */ for (;;) { __asm__ __volatile__("dsb\n\t" "wfi\n\t" diff --git a/arch/arm/mach-prima2/include/mach/clkdev.h b/arch/arm/mach-prima2/include/mach/clkdev.h deleted file mode 100644 index 66932518b1b7..000000000000 --- a/arch/arm/mach-prima2/include/mach/clkdev.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * arch/arm/mach-prima2/include/mach/clkdev.h - * - * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. - * - * Licensed under GPLv2 or later. - */ - -#ifndef __MACH_CLKDEV_H -#define __MACH_CLKDEV_H - -#define __clk_get(clk) ({ 1; }) -#define __clk_put(clk) do { } while (0) - -#endif diff --git a/arch/arm/mach-prima2/include/mach/debug-macro.S b/arch/arm/mach-prima2/include/mach/debug-macro.S deleted file mode 100644 index cd97492bb075..000000000000 --- a/arch/arm/mach-prima2/include/mach/debug-macro.S +++ /dev/null @@ -1,29 +0,0 @@ -/* - * arch/arm/mach-prima2/include/mach/debug-macro.S - * - * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. - * - * Licensed under GPLv2 or later. - */ - -#include <mach/hardware.h> -#include <mach/uart.h> - - .macro addruart, rp, rv, tmp - ldr \rp, =SIRFSOC_UART1_PA_BASE @ physical - ldr \rv, =SIRFSOC_UART1_VA_BASE @ virtual - .endm - - .macro senduart,rd,rx - str \rd, [\rx, #SIRFSOC_UART_TXFIFO_DATA] - .endm - - .macro busyuart,rd,rx - .endm - - .macro waituart,rd,rx -1001: ldr \rd, [\rx, #SIRFSOC_UART_TXFIFO_STATUS] - tst \rd, #SIRFSOC_UART1_TXFIFO_EMPTY - beq 1001b - .endm - diff --git a/arch/arm/mach-prima2/include/mach/entry-macro.S b/arch/arm/mach-prima2/include/mach/entry-macro.S deleted file mode 100644 index 86434e7a5be9..000000000000 --- a/arch/arm/mach-prima2/include/mach/entry-macro.S +++ /dev/null @@ -1,22 +0,0 @@ -/* - * arch/arm/mach-prima2/include/mach/entry-macro.S - * - * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. - * - * Licensed under GPLv2 or later. - */ - -#include <mach/hardware.h> - -#define SIRFSOC_INT_ID 0x38 - - .macro get_irqnr_preamble, base, tmp - ldr \base, =sirfsoc_intc_base - ldr \base, [\base] - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \irqnr, [\base, #SIRFSOC_INT_ID] @ Get the highest priority irq - cmp \irqnr, #0x40 @ the irq num can't be larger than 0x3f - movges \irqnr, #0 - .endm diff --git a/arch/arm/mach-prima2/include/mach/hardware.h b/arch/arm/mach-prima2/include/mach/hardware.h deleted file mode 100644 index 105b96964f25..000000000000 --- a/arch/arm/mach-prima2/include/mach/hardware.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * arch/arm/mach-prima2/include/mach/hardware.h - * - * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. - * - * Licensed under GPLv2 or later. - */ - -#ifndef __MACH_HARDWARE_H__ -#define __MACH_HARDWARE_H__ - -#include <asm/sizes.h> -#include <mach/map.h> - -#endif diff --git a/arch/arm/mach-prima2/include/mach/irqs.h b/arch/arm/mach-prima2/include/mach/irqs.h deleted file mode 100644 index b778a0f248ed..000000000000 --- a/arch/arm/mach-prima2/include/mach/irqs.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * arch/arm/mach-prima2/include/mach/irqs.h - * - * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. - * - * Licensed under GPLv2 or later. - */ - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H - -#define SIRFSOC_INTENAL_IRQ_START 0 -#define SIRFSOC_INTENAL_IRQ_END 127 -#define SIRFSOC_GPIO_IRQ_START (SIRFSOC_INTENAL_IRQ_END + 1) -#define NR_IRQS 288 - -#endif diff --git a/arch/arm/mach-prima2/include/mach/map.h b/arch/arm/mach-prima2/include/mach/map.h deleted file mode 100644 index 6f243532570c..000000000000 --- a/arch/arm/mach-prima2/include/mach/map.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * memory & I/O static mapping definitions for CSR SiRFprimaII - * - * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. - * - * Licensed under GPLv2 or later. - */ - -#ifndef __MACH_PRIMA2_MAP_H__ -#define __MACH_PRIMA2_MAP_H__ - -#include <linux/const.h> - -#define SIRFSOC_VA_BASE _AC(0xFEC00000, UL) - -#define SIRFSOC_VA(x) (SIRFSOC_VA_BASE + ((x) & 0x00FFF000)) - -#endif diff --git a/arch/arm/mach-prima2/include/mach/timex.h b/arch/arm/mach-prima2/include/mach/timex.h deleted file mode 100644 index d6f98a75e562..000000000000 --- a/arch/arm/mach-prima2/include/mach/timex.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * arch/arm/mach-prima2/include/mach/timex.h - * - * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. - * - * Licensed under GPLv2 or later. - */ - -#ifndef __MACH_TIMEX_H__ -#define __MACH_TIMEX_H__ - -#define CLOCK_TICK_RATE 1000000 - -#endif diff --git a/arch/arm/mach-prima2/include/mach/uncompress.h b/arch/arm/mach-prima2/include/mach/uncompress.h deleted file mode 100644 index d1513a33709a..000000000000 --- a/arch/arm/mach-prima2/include/mach/uncompress.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - * arch/arm/mach-prima2/include/mach/uncompress.h - * - * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. - * - * Licensed under GPLv2 or later. - */ - -#ifndef __ASM_ARCH_UNCOMPRESS_H -#define __ASM_ARCH_UNCOMPRESS_H - -#include <linux/io.h> -#include <mach/hardware.h> -#include <mach/uart.h> - -void arch_decomp_setup(void) -{ -} - -static __inline__ void putc(char c) -{ - /* - * during kernel decompression, all mappings are flat: - * virt_addr == phys_addr - */ - if (!SIRFSOC_UART1_PA_BASE) - return; - - while (__raw_readl((void __iomem *)SIRFSOC_UART1_PA_BASE + SIRFSOC_UART_TXFIFO_STATUS) - & SIRFSOC_UART1_TXFIFO_FULL) - barrier(); - - __raw_writel(c, (void __iomem *)SIRFSOC_UART1_PA_BASE + SIRFSOC_UART_TXFIFO_DATA); -} - -static inline void flush(void) -{ -} - -#endif - diff --git a/arch/arm/mach-prima2/irq.c b/arch/arm/mach-prima2/irq.c deleted file mode 100644 index 6c0f3e9c43fb..000000000000 --- a/arch/arm/mach-prima2/irq.c +++ /dev/null @@ -1,129 +0,0 @@ -/* - * interrupt controller support for CSR SiRFprimaII - * - * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. - * - * Licensed under GPLv2 or later. - */ - -#include <linux/init.h> -#include <linux/io.h> -#include <linux/irq.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/irqdomain.h> -#include <linux/syscore_ops.h> -#include <asm/mach/irq.h> -#include <asm/exception.h> -#include <mach/hardware.h> - -#define SIRFSOC_INT_RISC_MASK0 0x0018 -#define SIRFSOC_INT_RISC_MASK1 0x001C -#define SIRFSOC_INT_RISC_LEVEL0 0x0020 -#define SIRFSOC_INT_RISC_LEVEL1 0x0024 -#define SIRFSOC_INIT_IRQ_ID 0x0038 - -void __iomem *sirfsoc_intc_base; - -static __init void -sirfsoc_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num) -{ - struct irq_chip_generic *gc; - struct irq_chip_type *ct; - - gc = irq_alloc_generic_chip("SIRFINTC", 1, irq_start, base, handle_level_irq); - ct = gc->chip_types; - - ct->chip.irq_mask = irq_gc_mask_clr_bit; - ct->chip.irq_unmask = irq_gc_mask_set_bit; - ct->regs.mask = SIRFSOC_INT_RISC_MASK0; - - irq_setup_generic_chip(gc, IRQ_MSK(num), IRQ_GC_INIT_MASK_CACHE, IRQ_NOREQUEST, 0); -} - -static __init void sirfsoc_irq_init(void) -{ - sirfsoc_alloc_gc(sirfsoc_intc_base, 0, 32); - sirfsoc_alloc_gc(sirfsoc_intc_base + 4, 32, - SIRFSOC_INTENAL_IRQ_END + 1 - 32); - - writel_relaxed(0, sirfsoc_intc_base + SIRFSOC_INT_RISC_LEVEL0); - writel_relaxed(0, sirfsoc_intc_base + SIRFSOC_INT_RISC_LEVEL1); - - writel_relaxed(0, sirfsoc_intc_base + SIRFSOC_INT_RISC_MASK0); - writel_relaxed(0, sirfsoc_intc_base + SIRFSOC_INT_RISC_MASK1); -} - -asmlinkage void __exception_irq_entry sirfsoc_handle_irq(struct pt_regs *regs) -{ - u32 irqstat, irqnr; - - irqstat = readl_relaxed(sirfsoc_intc_base + SIRFSOC_INIT_IRQ_ID); - irqnr = irqstat & 0xff; - - handle_IRQ(irqnr, regs); -} - -static struct of_device_id intc_ids[] = { - { .compatible = "sirf,prima2-intc" }, - {}, -}; - -void __init sirfsoc_of_irq_init(void) -{ - struct device_node *np; - - np = of_find_matching_node(NULL, intc_ids); - if (!np) - return; - - sirfsoc_intc_base = of_iomap(np, 0); - if (!sirfsoc_intc_base) - panic("unable to map intc cpu registers\n"); - - irq_domain_add_legacy(np, SIRFSOC_INTENAL_IRQ_END + 1, 0, 0, - &irq_domain_simple_ops, NULL); - - of_node_put(np); - - sirfsoc_irq_init(); -} - -struct sirfsoc_irq_status { - u32 mask0; - u32 mask1; - u32 level0; - u32 level1; -}; - -static struct sirfsoc_irq_status sirfsoc_irq_st; - -static int sirfsoc_irq_suspend(void) -{ - sirfsoc_irq_st.mask0 = readl_relaxed(sirfsoc_intc_base + SIRFSOC_INT_RISC_MASK0); - sirfsoc_irq_st.mask1 = readl_relaxed(sirfsoc_intc_base + SIRFSOC_INT_RISC_MASK1); - sirfsoc_irq_st.level0 = readl_relaxed(sirfsoc_intc_base + SIRFSOC_INT_RISC_LEVEL0); - sirfsoc_irq_st.level1 = readl_relaxed(sirfsoc_intc_base + SIRFSOC_INT_RISC_LEVEL1); - - return 0; -} - -static void sirfsoc_irq_resume(void) -{ - writel_relaxed(sirfsoc_irq_st.mask0, sirfsoc_intc_base + SIRFSOC_INT_RISC_MASK0); - writel_relaxed(sirfsoc_irq_st.mask1, sirfsoc_intc_base + SIRFSOC_INT_RISC_MASK1); - writel_relaxed(sirfsoc_irq_st.level0, sirfsoc_intc_base + SIRFSOC_INT_RISC_LEVEL0); - writel_relaxed(sirfsoc_irq_st.level1, sirfsoc_intc_base + SIRFSOC_INT_RISC_LEVEL1); -} - -static struct syscore_ops sirfsoc_irq_syscore_ops = { - .suspend = sirfsoc_irq_suspend, - .resume = sirfsoc_irq_resume, -}; - -static int __init sirfsoc_irq_pm_init(void) -{ - register_syscore_ops(&sirfsoc_irq_syscore_ops); - return 0; -} -device_initcall(sirfsoc_irq_pm_init); diff --git a/arch/arm/mach-prima2/lluart.c b/arch/arm/mach-prima2/lluart.c index a89f9b3c8cc5..99c0c927ca4a 100644 --- a/arch/arm/mach-prima2/lluart.c +++ b/arch/arm/mach-prima2/lluart.c @@ -9,8 +9,18 @@ #include <linux/kernel.h> #include <asm/page.h> #include <asm/mach/map.h> -#include <mach/map.h> -#include <mach/uart.h> +#include "common.h" + +#if defined(CONFIG_DEBUG_SIRFPRIMA2_UART1) +#define SIRFSOC_UART1_PA_BASE 0xb0060000 +#elif defined(CONFIG_DEBUG_SIRFMARCO_UART1) +#define SIRFSOC_UART1_PA_BASE 0xcc060000 +#else +#define SIRFSOC_UART1_PA_BASE 0 +#endif + +#define SIRFSOC_UART1_VA_BASE SIRFSOC_VA(0x060000) +#define SIRFSOC_UART1_SIZE SZ_4K void __init sirfsoc_map_lluart(void) { diff --git a/arch/arm/mach-prima2/platsmp.c b/arch/arm/mach-prima2/platsmp.c index 4b788310f6a6..1c3de7bed841 100644 --- a/arch/arm/mach-prima2/platsmp.c +++ b/arch/arm/mach-prima2/platsmp.c @@ -11,14 +11,12 @@ #include <linux/delay.h> #include <linux/of.h> #include <linux/of_address.h> -#include <linux/irqchip/arm-gic.h> #include <asm/page.h> #include <asm/mach/map.h> #include <asm/smp_plat.h> #include <asm/smp_scu.h> #include <asm/cacheflush.h> #include <asm/cputype.h> -#include <mach/map.h> #include "common.h" @@ -49,13 +47,6 @@ void __init sirfsoc_map_scu(void) static void __cpuinit sirfsoc_secondary_init(unsigned int cpu) { /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); - - /* * let the primary processor know we're out of the * pen, then head off into the C entry point */ diff --git a/arch/arm/mach-prima2/timer-marco.c b/arch/arm/mach-prima2/timer-marco.c deleted file mode 100644 index f4eea2e97eb0..000000000000 --- a/arch/arm/mach-prima2/timer-marco.c +++ /dev/null @@ -1,316 +0,0 @@ -/* - * System timer for CSR SiRFprimaII - * - * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. - * - * Licensed under GPLv2 or later. - */ - -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/clockchips.h> -#include <linux/clocksource.h> -#include <linux/bitops.h> -#include <linux/irq.h> -#include <linux/clk.h> -#include <linux/slab.h> -#include <linux/of.h> -#include <linux/of_irq.h> -#include <linux/of_address.h> -#include <asm/sched_clock.h> -#include <asm/localtimer.h> -#include <asm/mach/time.h> - -#include "common.h" - -#define SIRFSOC_TIMER_32COUNTER_0_CTRL 0x0000 -#define SIRFSOC_TIMER_32COUNTER_1_CTRL 0x0004 -#define SIRFSOC_TIMER_MATCH_0 0x0018 -#define SIRFSOC_TIMER_MATCH_1 0x001c -#define SIRFSOC_TIMER_COUNTER_0 0x0048 -#define SIRFSOC_TIMER_COUNTER_1 0x004c -#define SIRFSOC_TIMER_INTR_STATUS 0x0060 -#define SIRFSOC_TIMER_WATCHDOG_EN 0x0064 -#define SIRFSOC_TIMER_64COUNTER_CTRL 0x0068 -#define SIRFSOC_TIMER_64COUNTER_LO 0x006c -#define SIRFSOC_TIMER_64COUNTER_HI 0x0070 -#define SIRFSOC_TIMER_64COUNTER_LOAD_LO 0x0074 -#define SIRFSOC_TIMER_64COUNTER_LOAD_HI 0x0078 -#define SIRFSOC_TIMER_64COUNTER_RLATCHED_LO 0x007c -#define SIRFSOC_TIMER_64COUNTER_RLATCHED_HI 0x0080 - -#define SIRFSOC_TIMER_REG_CNT 6 - -static const u32 sirfsoc_timer_reg_list[SIRFSOC_TIMER_REG_CNT] = { - SIRFSOC_TIMER_WATCHDOG_EN, - SIRFSOC_TIMER_32COUNTER_0_CTRL, - SIRFSOC_TIMER_32COUNTER_1_CTRL, - SIRFSOC_TIMER_64COUNTER_CTRL, - SIRFSOC_TIMER_64COUNTER_RLATCHED_LO, - SIRFSOC_TIMER_64COUNTER_RLATCHED_HI, -}; - -static u32 sirfsoc_timer_reg_val[SIRFSOC_TIMER_REG_CNT]; - -static void __iomem *sirfsoc_timer_base; -static void __init sirfsoc_of_timer_map(void); - -/* disable count and interrupt */ -static inline void sirfsoc_timer_count_disable(int idx) -{ - writel_relaxed(readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_0_CTRL + 4 * idx) & ~0x7, - sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_0_CTRL + 4 * idx); -} - -/* enable count and interrupt */ -static inline void sirfsoc_timer_count_enable(int idx) -{ - writel_relaxed(readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_0_CTRL + 4 * idx) | 0x7, - sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_0_CTRL + 4 * idx); -} - -/* timer interrupt handler */ -static irqreturn_t sirfsoc_timer_interrupt(int irq, void *dev_id) -{ - struct clock_event_device *ce = dev_id; - int cpu = smp_processor_id(); - - /* clear timer interrupt */ - writel_relaxed(BIT(cpu), sirfsoc_timer_base + SIRFSOC_TIMER_INTR_STATUS); - - if (ce->mode == CLOCK_EVT_MODE_ONESHOT) - sirfsoc_timer_count_disable(cpu); - - ce->event_handler(ce); - - return IRQ_HANDLED; -} - -/* read 64-bit timer counter */ -static cycle_t sirfsoc_timer_read(struct clocksource *cs) -{ - u64 cycles; - - writel_relaxed((readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL) | - BIT(0)) & ~BIT(1), sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL); - - cycles = readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_RLATCHED_HI); - cycles = (cycles << 32) | readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_RLATCHED_LO); - - return cycles; -} - -static int sirfsoc_timer_set_next_event(unsigned long delta, - struct clock_event_device *ce) -{ - int cpu = smp_processor_id(); - - writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_0 + - 4 * cpu); - writel_relaxed(delta, sirfsoc_timer_base + SIRFSOC_TIMER_MATCH_0 + - 4 * cpu); - - /* enable the tick */ - sirfsoc_timer_count_enable(cpu); - - return 0; -} - -static void sirfsoc_timer_set_mode(enum clock_event_mode mode, - struct clock_event_device *ce) -{ - switch (mode) { - case CLOCK_EVT_MODE_ONESHOT: - /* enable in set_next_event */ - break; - default: - break; - } - - sirfsoc_timer_count_disable(smp_processor_id()); -} - -static void sirfsoc_clocksource_suspend(struct clocksource *cs) -{ - int i; - - for (i = 0; i < SIRFSOC_TIMER_REG_CNT; i++) - sirfsoc_timer_reg_val[i] = readl_relaxed(sirfsoc_timer_base + sirfsoc_timer_reg_list[i]); -} - -static void sirfsoc_clocksource_resume(struct clocksource *cs) -{ - int i; - - for (i = 0; i < SIRFSOC_TIMER_REG_CNT - 2; i++) - writel_relaxed(sirfsoc_timer_reg_val[i], sirfsoc_timer_base + sirfsoc_timer_reg_list[i]); - - writel_relaxed(sirfsoc_timer_reg_val[SIRFSOC_TIMER_REG_CNT - 2], - sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_LOAD_LO); - writel_relaxed(sirfsoc_timer_reg_val[SIRFSOC_TIMER_REG_CNT - 1], - sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_LOAD_HI); - - writel_relaxed(readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL) | - BIT(1) | BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL); -} - -static struct clock_event_device sirfsoc_clockevent = { - .name = "sirfsoc_clockevent", - .rating = 200, - .features = CLOCK_EVT_FEAT_ONESHOT, - .set_mode = sirfsoc_timer_set_mode, - .set_next_event = sirfsoc_timer_set_next_event, -}; - -static struct clocksource sirfsoc_clocksource = { - .name = "sirfsoc_clocksource", - .rating = 200, - .mask = CLOCKSOURCE_MASK(64), - .flags = CLOCK_SOURCE_IS_CONTINUOUS, - .read = sirfsoc_timer_read, - .suspend = sirfsoc_clocksource_suspend, - .resume = sirfsoc_clocksource_resume, -}; - -static struct irqaction sirfsoc_timer_irq = { - .name = "sirfsoc_timer0", - .flags = IRQF_TIMER | IRQF_NOBALANCING, - .handler = sirfsoc_timer_interrupt, - .dev_id = &sirfsoc_clockevent, -}; - -#ifdef CONFIG_LOCAL_TIMERS - -static struct irqaction sirfsoc_timer1_irq = { - .name = "sirfsoc_timer1", - .flags = IRQF_TIMER | IRQF_NOBALANCING, - .handler = sirfsoc_timer_interrupt, -}; - -static int __cpuinit sirfsoc_local_timer_setup(struct clock_event_device *ce) -{ - /* Use existing clock_event for cpu 0 */ - if (!smp_processor_id()) - return 0; - - ce->irq = sirfsoc_timer1_irq.irq; - ce->name = "local_timer"; - ce->features = sirfsoc_clockevent.features; - ce->rating = sirfsoc_clockevent.rating; - ce->set_mode = sirfsoc_timer_set_mode; - ce->set_next_event = sirfsoc_timer_set_next_event; - ce->shift = sirfsoc_clockevent.shift; - ce->mult = sirfsoc_clockevent.mult; - ce->max_delta_ns = sirfsoc_clockevent.max_delta_ns; - ce->min_delta_ns = sirfsoc_clockevent.min_delta_ns; - - sirfsoc_timer1_irq.dev_id = ce; - BUG_ON(setup_irq(ce->irq, &sirfsoc_timer1_irq)); - irq_set_affinity(sirfsoc_timer1_irq.irq, cpumask_of(1)); - - clockevents_register_device(ce); - return 0; -} - -static void sirfsoc_local_timer_stop(struct clock_event_device *ce) -{ - sirfsoc_timer_count_disable(1); - - remove_irq(sirfsoc_timer1_irq.irq, &sirfsoc_timer1_irq); -} - -static struct local_timer_ops sirfsoc_local_timer_ops __cpuinitdata = { - .setup = sirfsoc_local_timer_setup, - .stop = sirfsoc_local_timer_stop, -}; -#endif /* CONFIG_LOCAL_TIMERS */ - -static void __init sirfsoc_clockevent_init(void) -{ - clockevents_calc_mult_shift(&sirfsoc_clockevent, CLOCK_TICK_RATE, 60); - - sirfsoc_clockevent.max_delta_ns = - clockevent_delta2ns(-2, &sirfsoc_clockevent); - sirfsoc_clockevent.min_delta_ns = - clockevent_delta2ns(2, &sirfsoc_clockevent); - - sirfsoc_clockevent.cpumask = cpumask_of(0); - clockevents_register_device(&sirfsoc_clockevent); -#ifdef CONFIG_LOCAL_TIMERS - local_timer_register(&sirfsoc_local_timer_ops); -#endif -} - -/* initialize the kernel jiffy timer source */ -void __init sirfsoc_marco_timer_init(void) -{ - unsigned long rate; - u32 timer_div; - struct clk *clk; - - /* initialize clocking early, we want to set the OS timer */ - sirfsoc_of_clk_init(); - - /* timer's input clock is io clock */ - clk = clk_get_sys("io", NULL); - - BUG_ON(IS_ERR(clk)); - rate = clk_get_rate(clk); - - BUG_ON(rate < CLOCK_TICK_RATE); - BUG_ON(rate % CLOCK_TICK_RATE); - - sirfsoc_of_timer_map(); - - /* Initialize the timer dividers */ - timer_div = rate / CLOCK_TICK_RATE - 1; - writel_relaxed(timer_div << 16, sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL); - writel_relaxed(timer_div << 16, sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_0_CTRL); - writel_relaxed(timer_div << 16, sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_1_CTRL); - - /* Initialize timer counters to 0 */ - writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_LOAD_LO); - writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_LOAD_HI); - writel_relaxed(readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL) | - BIT(1) | BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL); - writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_0); - writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_1); - - /* Clear all interrupts */ - writel_relaxed(0xFFFF, sirfsoc_timer_base + SIRFSOC_TIMER_INTR_STATUS); - - BUG_ON(clocksource_register_hz(&sirfsoc_clocksource, CLOCK_TICK_RATE)); - - BUG_ON(setup_irq(sirfsoc_timer_irq.irq, &sirfsoc_timer_irq)); - - sirfsoc_clockevent_init(); -} - -static struct of_device_id timer_ids[] = { - { .compatible = "sirf,marco-tick" }, - {}, -}; - -static void __init sirfsoc_of_timer_map(void) -{ - struct device_node *np; - - np = of_find_matching_node(NULL, timer_ids); - if (!np) - return; - sirfsoc_timer_base = of_iomap(np, 0); - if (!sirfsoc_timer_base) - panic("unable to map timer cpu registers\n"); - - sirfsoc_timer_irq.irq = irq_of_parse_and_map(np, 0); - if (!sirfsoc_timer_irq.irq) - panic("No irq passed for timer0 via DT\n"); - -#ifdef CONFIG_LOCAL_TIMERS - sirfsoc_timer1_irq.irq = irq_of_parse_and_map(np, 1); - if (!sirfsoc_timer1_irq.irq) - panic("No irq passed for timer1 via DT\n"); -#endif - - of_node_put(np); -} diff --git a/arch/arm/mach-prima2/timer-prima2.c b/arch/arm/mach-prima2/timer-prima2.c deleted file mode 100644 index 6da584f8a949..000000000000 --- a/arch/arm/mach-prima2/timer-prima2.c +++ /dev/null @@ -1,241 +0,0 @@ -/* - * System timer for CSR SiRFprimaII - * - * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. - * - * Licensed under GPLv2 or later. - */ - -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/clockchips.h> -#include <linux/clocksource.h> -#include <linux/bitops.h> -#include <linux/irq.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/slab.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <mach/map.h> -#include <asm/sched_clock.h> -#include <asm/mach/time.h> - -#include "common.h" - -#define SIRFSOC_TIMER_COUNTER_LO 0x0000 -#define SIRFSOC_TIMER_COUNTER_HI 0x0004 -#define SIRFSOC_TIMER_MATCH_0 0x0008 -#define SIRFSOC_TIMER_MATCH_1 0x000C -#define SIRFSOC_TIMER_MATCH_2 0x0010 -#define SIRFSOC_TIMER_MATCH_3 0x0014 -#define SIRFSOC_TIMER_MATCH_4 0x0018 -#define SIRFSOC_TIMER_MATCH_5 0x001C -#define SIRFSOC_TIMER_STATUS 0x0020 -#define SIRFSOC_TIMER_INT_EN 0x0024 -#define SIRFSOC_TIMER_WATCHDOG_EN 0x0028 -#define SIRFSOC_TIMER_DIV 0x002C -#define SIRFSOC_TIMER_LATCH 0x0030 -#define SIRFSOC_TIMER_LATCHED_LO 0x0034 -#define SIRFSOC_TIMER_LATCHED_HI 0x0038 - -#define SIRFSOC_TIMER_WDT_INDEX 5 - -#define SIRFSOC_TIMER_LATCH_BIT BIT(0) - -#define SIRFSOC_TIMER_REG_CNT 11 - -static const u32 sirfsoc_timer_reg_list[SIRFSOC_TIMER_REG_CNT] = { - SIRFSOC_TIMER_MATCH_0, SIRFSOC_TIMER_MATCH_1, SIRFSOC_TIMER_MATCH_2, - SIRFSOC_TIMER_MATCH_3, SIRFSOC_TIMER_MATCH_4, SIRFSOC_TIMER_MATCH_5, - SIRFSOC_TIMER_INT_EN, SIRFSOC_TIMER_WATCHDOG_EN, SIRFSOC_TIMER_DIV, - SIRFSOC_TIMER_LATCHED_LO, SIRFSOC_TIMER_LATCHED_HI, -}; - -static u32 sirfsoc_timer_reg_val[SIRFSOC_TIMER_REG_CNT]; - -static void __iomem *sirfsoc_timer_base; -static void __init sirfsoc_of_timer_map(void); - -/* timer0 interrupt handler */ -static irqreturn_t sirfsoc_timer_interrupt(int irq, void *dev_id) -{ - struct clock_event_device *ce = dev_id; - - WARN_ON(!(readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_STATUS) & BIT(0))); - - /* clear timer0 interrupt */ - writel_relaxed(BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_STATUS); - - ce->event_handler(ce); - - return IRQ_HANDLED; -} - -/* read 64-bit timer counter */ -static cycle_t sirfsoc_timer_read(struct clocksource *cs) -{ - u64 cycles; - - /* latch the 64-bit timer counter */ - writel_relaxed(SIRFSOC_TIMER_LATCH_BIT, sirfsoc_timer_base + SIRFSOC_TIMER_LATCH); - cycles = readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_LATCHED_HI); - cycles = (cycles << 32) | readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_LATCHED_LO); - - return cycles; -} - -static int sirfsoc_timer_set_next_event(unsigned long delta, - struct clock_event_device *ce) -{ - unsigned long now, next; - - writel_relaxed(SIRFSOC_TIMER_LATCH_BIT, sirfsoc_timer_base + SIRFSOC_TIMER_LATCH); - now = readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_LATCHED_LO); - next = now + delta; - writel_relaxed(next, sirfsoc_timer_base + SIRFSOC_TIMER_MATCH_0); - writel_relaxed(SIRFSOC_TIMER_LATCH_BIT, sirfsoc_timer_base + SIRFSOC_TIMER_LATCH); - now = readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_LATCHED_LO); - - return next - now > delta ? -ETIME : 0; -} - -static void sirfsoc_timer_set_mode(enum clock_event_mode mode, - struct clock_event_device *ce) -{ - u32 val = readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_INT_EN); - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - WARN_ON(1); - break; - case CLOCK_EVT_MODE_ONESHOT: - writel_relaxed(val | BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_INT_EN); - break; - case CLOCK_EVT_MODE_SHUTDOWN: - writel_relaxed(val & ~BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_INT_EN); - break; - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_RESUME: - break; - } -} - -static void sirfsoc_clocksource_suspend(struct clocksource *cs) -{ - int i; - - writel_relaxed(SIRFSOC_TIMER_LATCH_BIT, sirfsoc_timer_base + SIRFSOC_TIMER_LATCH); - - for (i = 0; i < SIRFSOC_TIMER_REG_CNT; i++) - sirfsoc_timer_reg_val[i] = readl_relaxed(sirfsoc_timer_base + sirfsoc_timer_reg_list[i]); -} - -static void sirfsoc_clocksource_resume(struct clocksource *cs) -{ - int i; - - for (i = 0; i < SIRFSOC_TIMER_REG_CNT - 2; i++) - writel_relaxed(sirfsoc_timer_reg_val[i], sirfsoc_timer_base + sirfsoc_timer_reg_list[i]); - - writel_relaxed(sirfsoc_timer_reg_val[SIRFSOC_TIMER_REG_CNT - 2], sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_LO); - writel_relaxed(sirfsoc_timer_reg_val[SIRFSOC_TIMER_REG_CNT - 1], sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_HI); -} - -static struct clock_event_device sirfsoc_clockevent = { - .name = "sirfsoc_clockevent", - .rating = 200, - .features = CLOCK_EVT_FEAT_ONESHOT, - .set_mode = sirfsoc_timer_set_mode, - .set_next_event = sirfsoc_timer_set_next_event, -}; - -static struct clocksource sirfsoc_clocksource = { - .name = "sirfsoc_clocksource", - .rating = 200, - .mask = CLOCKSOURCE_MASK(64), - .flags = CLOCK_SOURCE_IS_CONTINUOUS, - .read = sirfsoc_timer_read, - .suspend = sirfsoc_clocksource_suspend, - .resume = sirfsoc_clocksource_resume, -}; - -static struct irqaction sirfsoc_timer_irq = { - .name = "sirfsoc_timer0", - .flags = IRQF_TIMER, - .irq = 0, - .handler = sirfsoc_timer_interrupt, - .dev_id = &sirfsoc_clockevent, -}; - -/* Overwrite weak default sched_clock with more precise one */ -static u32 notrace sirfsoc_read_sched_clock(void) -{ - return (u32)(sirfsoc_timer_read(NULL) & 0xffffffff); -} - -static void __init sirfsoc_clockevent_init(void) -{ - sirfsoc_clockevent.cpumask = cpumask_of(0); - clockevents_config_and_register(&sirfsoc_clockevent, CLOCK_TICK_RATE, - 2, -2); -} - -/* initialize the kernel jiffy timer source */ -void __init sirfsoc_prima2_timer_init(void) -{ - unsigned long rate; - struct clk *clk; - - /* initialize clocking early, we want to set the OS timer */ - sirfsoc_of_clk_init(); - - /* timer's input clock is io clock */ - clk = clk_get_sys("io", NULL); - - BUG_ON(IS_ERR(clk)); - - rate = clk_get_rate(clk); - - BUG_ON(rate < CLOCK_TICK_RATE); - BUG_ON(rate % CLOCK_TICK_RATE); - - sirfsoc_of_timer_map(); - - writel_relaxed(rate / CLOCK_TICK_RATE / 2 - 1, sirfsoc_timer_base + SIRFSOC_TIMER_DIV); - writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_LO); - writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_HI); - writel_relaxed(BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_STATUS); - - BUG_ON(clocksource_register_hz(&sirfsoc_clocksource, CLOCK_TICK_RATE)); - - setup_sched_clock(sirfsoc_read_sched_clock, 32, CLOCK_TICK_RATE); - - BUG_ON(setup_irq(sirfsoc_timer_irq.irq, &sirfsoc_timer_irq)); - - sirfsoc_clockevent_init(); -} - -static struct of_device_id timer_ids[] = { - { .compatible = "sirf,prima2-tick" }, - {}, -}; - -static void __init sirfsoc_of_timer_map(void) -{ - struct device_node *np; - const unsigned int *intspec; - - np = of_find_matching_node(NULL, timer_ids); - if (!np) - return; - sirfsoc_timer_base = of_iomap(np, 0); - if (!sirfsoc_timer_base) - panic("unable to map timer cpu registers\n"); - - /* Get the interrupts property */ - intspec = of_get_property(np, "interrupts", NULL); - BUG_ON(!intspec); - sirfsoc_timer_irq.irq = be32_to_cpup(intspec); - - of_node_put(np); -} diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 86eec4159cbc..9075461999c1 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -51,11 +51,13 @@ config MACH_LITTLETON config MACH_TAVOREVB bool "PXA930 Evaluation Board (aka TavorEVB)" select CPU_PXA930 + select CPU_PXA935 select PXA3xx config MACH_SAAR bool "PXA930 Handheld Platform (aka SAAR)" select CPU_PXA930 + select CPU_PXA935 select PXA3xx comment "Third Party Dev Platforms (sorted by vendor name)" diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index 12c500558387..648867a8caa8 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -7,12 +7,6 @@ obj-y += clock.o devices.o generic.o irq.o \ time.o reset.o obj-$(CONFIG_PM) += pm.o sleep.o standby.o -ifeq ($(CONFIG_CPU_FREQ),y) -obj-$(CONFIG_PXA25x) += cpufreq-pxa2xx.o -obj-$(CONFIG_PXA27x) += cpufreq-pxa2xx.o -obj-$(CONFIG_PXA3xx) += cpufreq-pxa3xx.o -endif - # Generic drivers that other drivers may depend upon # SoC-specific code diff --git a/arch/arm/mach-pxa/cpufreq-pxa2xx.c b/arch/arm/mach-pxa/cpufreq-pxa2xx.c deleted file mode 100644 index 6a7aeab42f6c..000000000000 --- a/arch/arm/mach-pxa/cpufreq-pxa2xx.c +++ /dev/null @@ -1,494 +0,0 @@ -/* - * linux/arch/arm/mach-pxa/cpufreq-pxa2xx.c - * - * Copyright (C) 2002,2003 Intrinsyc Software - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * History: - * 31-Jul-2002 : Initial version [FB] - * 29-Jan-2003 : added PXA255 support [FB] - * 20-Apr-2003 : ported to v2.5 (Dustin McIntire, Sensoria Corp.) - * - * Note: - * This driver may change the memory bus clock rate, but will not do any - * platform specific access timing changes... for example if you have flash - * memory connected to CS0, you will need to register a platform specific - * notifier which will adjust the memory access strobes to maintain a - * minimum strobe width. - * - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/sched.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <linux/err.h> -#include <linux/regulator/consumer.h> -#include <linux/io.h> - -#include <mach/pxa2xx-regs.h> -#include <mach/smemc.h> - -#ifdef DEBUG -static unsigned int freq_debug; -module_param(freq_debug, uint, 0); -MODULE_PARM_DESC(freq_debug, "Set the debug messages to on=1/off=0"); -#else -#define freq_debug 0 -#endif - -static struct regulator *vcc_core; - -static unsigned int pxa27x_maxfreq; -module_param(pxa27x_maxfreq, uint, 0); -MODULE_PARM_DESC(pxa27x_maxfreq, "Set the pxa27x maxfreq in MHz" - "(typically 624=>pxa270, 416=>pxa271, 520=>pxa272)"); - -typedef struct { - unsigned int khz; - unsigned int membus; - unsigned int cccr; - unsigned int div2; - unsigned int cclkcfg; - int vmin; - int vmax; -} pxa_freqs_t; - -/* Define the refresh period in mSec for the SDRAM and the number of rows */ -#define SDRAM_TREF 64 /* standard 64ms SDRAM */ -static unsigned int sdram_rows; - -#define CCLKCFG_TURBO 0x1 -#define CCLKCFG_FCS 0x2 -#define CCLKCFG_HALFTURBO 0x4 -#define CCLKCFG_FASTBUS 0x8 -#define MDREFR_DB2_MASK (MDREFR_K2DB2 | MDREFR_K1DB2) -#define MDREFR_DRI_MASK 0xFFF - -#define MDCNFG_DRAC2(mdcnfg) (((mdcnfg) >> 21) & 0x3) -#define MDCNFG_DRAC0(mdcnfg) (((mdcnfg) >> 5) & 0x3) - -/* - * PXA255 definitions - */ -/* Use the run mode frequencies for the CPUFREQ_POLICY_PERFORMANCE policy */ -#define CCLKCFG CCLKCFG_TURBO | CCLKCFG_FCS - -static pxa_freqs_t pxa255_run_freqs[] = -{ - /* CPU MEMBUS CCCR DIV2 CCLKCFG run turbo PXbus SDRAM */ - { 99500, 99500, 0x121, 1, CCLKCFG, -1, -1}, /* 99, 99, 50, 50 */ - {132700, 132700, 0x123, 1, CCLKCFG, -1, -1}, /* 133, 133, 66, 66 */ - {199100, 99500, 0x141, 0, CCLKCFG, -1, -1}, /* 199, 199, 99, 99 */ - {265400, 132700, 0x143, 1, CCLKCFG, -1, -1}, /* 265, 265, 133, 66 */ - {331800, 165900, 0x145, 1, CCLKCFG, -1, -1}, /* 331, 331, 166, 83 */ - {398100, 99500, 0x161, 0, CCLKCFG, -1, -1}, /* 398, 398, 196, 99 */ -}; - -/* Use the turbo mode frequencies for the CPUFREQ_POLICY_POWERSAVE policy */ -static pxa_freqs_t pxa255_turbo_freqs[] = -{ - /* CPU MEMBUS CCCR DIV2 CCLKCFG run turbo PXbus SDRAM */ - { 99500, 99500, 0x121, 1, CCLKCFG, -1, -1}, /* 99, 99, 50, 50 */ - {199100, 99500, 0x221, 0, CCLKCFG, -1, -1}, /* 99, 199, 50, 99 */ - {298500, 99500, 0x321, 0, CCLKCFG, -1, -1}, /* 99, 287, 50, 99 */ - {298600, 99500, 0x1c1, 0, CCLKCFG, -1, -1}, /* 199, 287, 99, 99 */ - {398100, 99500, 0x241, 0, CCLKCFG, -1, -1}, /* 199, 398, 99, 99 */ -}; - -#define NUM_PXA25x_RUN_FREQS ARRAY_SIZE(pxa255_run_freqs) -#define NUM_PXA25x_TURBO_FREQS ARRAY_SIZE(pxa255_turbo_freqs) - -static struct cpufreq_frequency_table - pxa255_run_freq_table[NUM_PXA25x_RUN_FREQS+1]; -static struct cpufreq_frequency_table - pxa255_turbo_freq_table[NUM_PXA25x_TURBO_FREQS+1]; - -static unsigned int pxa255_turbo_table; -module_param(pxa255_turbo_table, uint, 0); -MODULE_PARM_DESC(pxa255_turbo_table, "Selects the frequency table (0 = run table, !0 = turbo table)"); - -/* - * PXA270 definitions - * - * For the PXA27x: - * Control variables are A, L, 2N for CCCR; B, HT, T for CLKCFG. - * - * A = 0 => memory controller clock from table 3-7, - * A = 1 => memory controller clock = system bus clock - * Run mode frequency = 13 MHz * L - * Turbo mode frequency = 13 MHz * L * N - * System bus frequency = 13 MHz * L / (B + 1) - * - * In CCCR: - * A = 1 - * L = 16 oscillator to run mode ratio - * 2N = 6 2 * (turbo mode to run mode ratio) - * - * In CCLKCFG: - * B = 1 Fast bus mode - * HT = 0 Half-Turbo mode - * T = 1 Turbo mode - * - * For now, just support some of the combinations in table 3-7 of - * PXA27x Processor Family Developer's Manual to simplify frequency - * change sequences. - */ -#define PXA27x_CCCR(A, L, N2) (A << 25 | N2 << 7 | L) -#define CCLKCFG2(B, HT, T) \ - (CCLKCFG_FCS | \ - ((B) ? CCLKCFG_FASTBUS : 0) | \ - ((HT) ? CCLKCFG_HALFTURBO : 0) | \ - ((T) ? CCLKCFG_TURBO : 0)) - -static pxa_freqs_t pxa27x_freqs[] = { - {104000, 104000, PXA27x_CCCR(1, 8, 2), 0, CCLKCFG2(1, 0, 1), 900000, 1705000 }, - {156000, 104000, PXA27x_CCCR(1, 8, 3), 0, CCLKCFG2(1, 0, 1), 1000000, 1705000 }, - {208000, 208000, PXA27x_CCCR(0, 16, 2), 1, CCLKCFG2(0, 0, 1), 1180000, 1705000 }, - {312000, 208000, PXA27x_CCCR(1, 16, 3), 1, CCLKCFG2(1, 0, 1), 1250000, 1705000 }, - {416000, 208000, PXA27x_CCCR(1, 16, 4), 1, CCLKCFG2(1, 0, 1), 1350000, 1705000 }, - {520000, 208000, PXA27x_CCCR(1, 16, 5), 1, CCLKCFG2(1, 0, 1), 1450000, 1705000 }, - {624000, 208000, PXA27x_CCCR(1, 16, 6), 1, CCLKCFG2(1, 0, 1), 1550000, 1705000 } -}; - -#define NUM_PXA27x_FREQS ARRAY_SIZE(pxa27x_freqs) -static struct cpufreq_frequency_table - pxa27x_freq_table[NUM_PXA27x_FREQS+1]; - -extern unsigned get_clk_frequency_khz(int info); - -#ifdef CONFIG_REGULATOR - -static int pxa_cpufreq_change_voltage(pxa_freqs_t *pxa_freq) -{ - int ret = 0; - int vmin, vmax; - - if (!cpu_is_pxa27x()) - return 0; - - vmin = pxa_freq->vmin; - vmax = pxa_freq->vmax; - if ((vmin == -1) || (vmax == -1)) - return 0; - - ret = regulator_set_voltage(vcc_core, vmin, vmax); - if (ret) - pr_err("cpufreq: Failed to set vcc_core in [%dmV..%dmV]\n", - vmin, vmax); - return ret; -} - -static __init void pxa_cpufreq_init_voltages(void) -{ - vcc_core = regulator_get(NULL, "vcc_core"); - if (IS_ERR(vcc_core)) { - pr_info("cpufreq: Didn't find vcc_core regulator\n"); - vcc_core = NULL; - } else { - pr_info("cpufreq: Found vcc_core regulator\n"); - } -} -#else -static int pxa_cpufreq_change_voltage(pxa_freqs_t *pxa_freq) -{ - return 0; -} - -static __init void pxa_cpufreq_init_voltages(void) { } -#endif - -static void find_freq_tables(struct cpufreq_frequency_table **freq_table, - pxa_freqs_t **pxa_freqs) -{ - if (cpu_is_pxa25x()) { - if (!pxa255_turbo_table) { - *pxa_freqs = pxa255_run_freqs; - *freq_table = pxa255_run_freq_table; - } else { - *pxa_freqs = pxa255_turbo_freqs; - *freq_table = pxa255_turbo_freq_table; - } - } - if (cpu_is_pxa27x()) { - *pxa_freqs = pxa27x_freqs; - *freq_table = pxa27x_freq_table; - } -} - -static void pxa27x_guess_max_freq(void) -{ - if (!pxa27x_maxfreq) { - pxa27x_maxfreq = 416000; - printk(KERN_INFO "PXA CPU 27x max frequency not defined " - "(pxa27x_maxfreq), assuming pxa271 with %dkHz maxfreq\n", - pxa27x_maxfreq); - } else { - pxa27x_maxfreq *= 1000; - } -} - -static void init_sdram_rows(void) -{ - uint32_t mdcnfg = __raw_readl(MDCNFG); - unsigned int drac2 = 0, drac0 = 0; - - if (mdcnfg & (MDCNFG_DE2 | MDCNFG_DE3)) - drac2 = MDCNFG_DRAC2(mdcnfg); - - if (mdcnfg & (MDCNFG_DE0 | MDCNFG_DE1)) - drac0 = MDCNFG_DRAC0(mdcnfg); - - sdram_rows = 1 << (11 + max(drac0, drac2)); -} - -static u32 mdrefr_dri(unsigned int freq) -{ - u32 interval = freq * SDRAM_TREF / sdram_rows; - - return (interval - (cpu_is_pxa27x() ? 31 : 0)) / 32; -} - -/* find a valid frequency point */ -static int pxa_verify_policy(struct cpufreq_policy *policy) -{ - struct cpufreq_frequency_table *pxa_freqs_table; - pxa_freqs_t *pxa_freqs; - int ret; - - find_freq_tables(&pxa_freqs_table, &pxa_freqs); - ret = cpufreq_frequency_table_verify(policy, pxa_freqs_table); - - if (freq_debug) - pr_debug("Verified CPU policy: %dKhz min to %dKhz max\n", - policy->min, policy->max); - - return ret; -} - -static unsigned int pxa_cpufreq_get(unsigned int cpu) -{ - return get_clk_frequency_khz(0); -} - -static int pxa_set_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - struct cpufreq_frequency_table *pxa_freqs_table; - pxa_freqs_t *pxa_freq_settings; - struct cpufreq_freqs freqs; - unsigned int idx; - unsigned long flags; - unsigned int new_freq_cpu, new_freq_mem; - unsigned int unused, preset_mdrefr, postset_mdrefr, cclkcfg; - int ret = 0; - - /* Get the current policy */ - find_freq_tables(&pxa_freqs_table, &pxa_freq_settings); - - /* Lookup the next frequency */ - if (cpufreq_frequency_table_target(policy, pxa_freqs_table, - target_freq, relation, &idx)) { - return -EINVAL; - } - - new_freq_cpu = pxa_freq_settings[idx].khz; - new_freq_mem = pxa_freq_settings[idx].membus; - freqs.old = policy->cur; - freqs.new = new_freq_cpu; - freqs.cpu = policy->cpu; - - if (freq_debug) - pr_debug("Changing CPU frequency to %d Mhz, (SDRAM %d Mhz)\n", - freqs.new / 1000, (pxa_freq_settings[idx].div2) ? - (new_freq_mem / 2000) : (new_freq_mem / 1000)); - - if (vcc_core && freqs.new > freqs.old) - ret = pxa_cpufreq_change_voltage(&pxa_freq_settings[idx]); - if (ret) - return ret; - /* - * Tell everyone what we're about to do... - * you should add a notify client with any platform specific - * Vcc changing capability - */ - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - /* Calculate the next MDREFR. If we're slowing down the SDRAM clock - * we need to preset the smaller DRI before the change. If we're - * speeding up we need to set the larger DRI value after the change. - */ - preset_mdrefr = postset_mdrefr = __raw_readl(MDREFR); - if ((preset_mdrefr & MDREFR_DRI_MASK) > mdrefr_dri(new_freq_mem)) { - preset_mdrefr = (preset_mdrefr & ~MDREFR_DRI_MASK); - preset_mdrefr |= mdrefr_dri(new_freq_mem); - } - postset_mdrefr = - (postset_mdrefr & ~MDREFR_DRI_MASK) | mdrefr_dri(new_freq_mem); - - /* If we're dividing the memory clock by two for the SDRAM clock, this - * must be set prior to the change. Clearing the divide must be done - * after the change. - */ - if (pxa_freq_settings[idx].div2) { - preset_mdrefr |= MDREFR_DB2_MASK; - postset_mdrefr |= MDREFR_DB2_MASK; - } else { - postset_mdrefr &= ~MDREFR_DB2_MASK; - } - - local_irq_save(flags); - - /* Set new the CCCR and prepare CCLKCFG */ - CCCR = pxa_freq_settings[idx].cccr; - cclkcfg = pxa_freq_settings[idx].cclkcfg; - - asm volatile(" \n\ - ldr r4, [%1] /* load MDREFR */ \n\ - b 2f \n\ - .align 5 \n\ -1: \n\ - str %3, [%1] /* preset the MDREFR */ \n\ - mcr p14, 0, %2, c6, c0, 0 /* set CCLKCFG[FCS] */ \n\ - str %4, [%1] /* postset the MDREFR */ \n\ - \n\ - b 3f \n\ -2: b 1b \n\ -3: nop \n\ - " - : "=&r" (unused) - : "r" (MDREFR), "r" (cclkcfg), - "r" (preset_mdrefr), "r" (postset_mdrefr) - : "r4", "r5"); - local_irq_restore(flags); - - /* - * Tell everyone what we've just done... - * you should add a notify client with any platform specific - * SDRAM refresh timer adjustments - */ - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - /* - * Even if voltage setting fails, we don't report it, as the frequency - * change succeeded. The voltage reduction is not a critical failure, - * only power savings will suffer from this. - * - * Note: if the voltage change fails, and a return value is returned, a - * bug is triggered (seems a deadlock). Should anybody find out where, - * the "return 0" should become a "return ret". - */ - if (vcc_core && freqs.new < freqs.old) - ret = pxa_cpufreq_change_voltage(&pxa_freq_settings[idx]); - - return 0; -} - -static int pxa_cpufreq_init(struct cpufreq_policy *policy) -{ - int i; - unsigned int freq; - struct cpufreq_frequency_table *pxa255_freq_table; - pxa_freqs_t *pxa255_freqs; - - /* try to guess pxa27x cpu */ - if (cpu_is_pxa27x()) - pxa27x_guess_max_freq(); - - pxa_cpufreq_init_voltages(); - - init_sdram_rows(); - - /* set default policy and cpuinfo */ - policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */ - policy->cur = get_clk_frequency_khz(0); /* current freq */ - policy->min = policy->max = policy->cur; - - /* Generate pxa25x the run cpufreq_frequency_table struct */ - for (i = 0; i < NUM_PXA25x_RUN_FREQS; i++) { - pxa255_run_freq_table[i].frequency = pxa255_run_freqs[i].khz; - pxa255_run_freq_table[i].index = i; - } - pxa255_run_freq_table[i].frequency = CPUFREQ_TABLE_END; - - /* Generate pxa25x the turbo cpufreq_frequency_table struct */ - for (i = 0; i < NUM_PXA25x_TURBO_FREQS; i++) { - pxa255_turbo_freq_table[i].frequency = - pxa255_turbo_freqs[i].khz; - pxa255_turbo_freq_table[i].index = i; - } - pxa255_turbo_freq_table[i].frequency = CPUFREQ_TABLE_END; - - pxa255_turbo_table = !!pxa255_turbo_table; - - /* Generate the pxa27x cpufreq_frequency_table struct */ - for (i = 0; i < NUM_PXA27x_FREQS; i++) { - freq = pxa27x_freqs[i].khz; - if (freq > pxa27x_maxfreq) - break; - pxa27x_freq_table[i].frequency = freq; - pxa27x_freq_table[i].index = i; - } - pxa27x_freq_table[i].index = i; - pxa27x_freq_table[i].frequency = CPUFREQ_TABLE_END; - - /* - * Set the policy's minimum and maximum frequencies from the tables - * just constructed. This sets cpuinfo.mxx_freq, min and max. - */ - if (cpu_is_pxa25x()) { - find_freq_tables(&pxa255_freq_table, &pxa255_freqs); - pr_info("PXA255 cpufreq using %s frequency table\n", - pxa255_turbo_table ? "turbo" : "run"); - cpufreq_frequency_table_cpuinfo(policy, pxa255_freq_table); - } - else if (cpu_is_pxa27x()) - cpufreq_frequency_table_cpuinfo(policy, pxa27x_freq_table); - - printk(KERN_INFO "PXA CPU frequency change support initialized\n"); - - return 0; -} - -static struct cpufreq_driver pxa_cpufreq_driver = { - .verify = pxa_verify_policy, - .target = pxa_set_target, - .init = pxa_cpufreq_init, - .get = pxa_cpufreq_get, - .name = "PXA2xx", -}; - -static int __init pxa_cpu_init(void) -{ - int ret = -ENODEV; - if (cpu_is_pxa25x() || cpu_is_pxa27x()) - ret = cpufreq_register_driver(&pxa_cpufreq_driver); - return ret; -} - -static void __exit pxa_cpu_exit(void) -{ - cpufreq_unregister_driver(&pxa_cpufreq_driver); -} - - -MODULE_AUTHOR("Intrinsyc Software Inc."); -MODULE_DESCRIPTION("CPU frequency changing driver for the PXA architecture"); -MODULE_LICENSE("GPL"); -module_init(pxa_cpu_init); -module_exit(pxa_cpu_exit); diff --git a/arch/arm/mach-pxa/cpufreq-pxa3xx.c b/arch/arm/mach-pxa/cpufreq-pxa3xx.c deleted file mode 100644 index b85b4ab7aac6..000000000000 --- a/arch/arm/mach-pxa/cpufreq-pxa3xx.c +++ /dev/null @@ -1,258 +0,0 @@ -/* - * linux/arch/arm/mach-pxa/cpufreq-pxa3xx.c - * - * Copyright (C) 2008 Marvell International Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/sched.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <linux/slab.h> -#include <linux/io.h> - -#include <mach/pxa3xx-regs.h> - -#include "generic.h" - -#define HSS_104M (0) -#define HSS_156M (1) -#define HSS_208M (2) -#define HSS_312M (3) - -#define SMCFS_78M (0) -#define SMCFS_104M (2) -#define SMCFS_208M (5) - -#define SFLFS_104M (0) -#define SFLFS_156M (1) -#define SFLFS_208M (2) -#define SFLFS_312M (3) - -#define XSPCLK_156M (0) -#define XSPCLK_NONE (3) - -#define DMCFS_26M (0) -#define DMCFS_260M (3) - -struct pxa3xx_freq_info { - unsigned int cpufreq_mhz; - unsigned int core_xl : 5; - unsigned int core_xn : 3; - unsigned int hss : 2; - unsigned int dmcfs : 2; - unsigned int smcfs : 3; - unsigned int sflfs : 2; - unsigned int df_clkdiv : 3; - - int vcc_core; /* in mV */ - int vcc_sram; /* in mV */ -}; - -#define OP(cpufreq, _xl, _xn, _hss, _dmc, _smc, _sfl, _dfi, vcore, vsram) \ -{ \ - .cpufreq_mhz = cpufreq, \ - .core_xl = _xl, \ - .core_xn = _xn, \ - .hss = HSS_##_hss##M, \ - .dmcfs = DMCFS_##_dmc##M, \ - .smcfs = SMCFS_##_smc##M, \ - .sflfs = SFLFS_##_sfl##M, \ - .df_clkdiv = _dfi, \ - .vcc_core = vcore, \ - .vcc_sram = vsram, \ -} - -static struct pxa3xx_freq_info pxa300_freqs[] = { - /* CPU XL XN HSS DMEM SMEM SRAM DFI VCC_CORE VCC_SRAM */ - OP(104, 8, 1, 104, 260, 78, 104, 3, 1000, 1100), /* 104MHz */ - OP(208, 16, 1, 104, 260, 104, 156, 2, 1000, 1100), /* 208MHz */ - OP(416, 16, 2, 156, 260, 104, 208, 2, 1100, 1200), /* 416MHz */ - OP(624, 24, 2, 208, 260, 208, 312, 3, 1375, 1400), /* 624MHz */ -}; - -static struct pxa3xx_freq_info pxa320_freqs[] = { - /* CPU XL XN HSS DMEM SMEM SRAM DFI VCC_CORE VCC_SRAM */ - OP(104, 8, 1, 104, 260, 78, 104, 3, 1000, 1100), /* 104MHz */ - OP(208, 16, 1, 104, 260, 104, 156, 2, 1000, 1100), /* 208MHz */ - OP(416, 16, 2, 156, 260, 104, 208, 2, 1100, 1200), /* 416MHz */ - OP(624, 24, 2, 208, 260, 208, 312, 3, 1375, 1400), /* 624MHz */ - OP(806, 31, 2, 208, 260, 208, 312, 3, 1400, 1400), /* 806MHz */ -}; - -static unsigned int pxa3xx_freqs_num; -static struct pxa3xx_freq_info *pxa3xx_freqs; -static struct cpufreq_frequency_table *pxa3xx_freqs_table; - -static int setup_freqs_table(struct cpufreq_policy *policy, - struct pxa3xx_freq_info *freqs, int num) -{ - struct cpufreq_frequency_table *table; - int i; - - table = kzalloc((num + 1) * sizeof(*table), GFP_KERNEL); - if (table == NULL) - return -ENOMEM; - - for (i = 0; i < num; i++) { - table[i].index = i; - table[i].frequency = freqs[i].cpufreq_mhz * 1000; - } - table[num].index = i; - table[num].frequency = CPUFREQ_TABLE_END; - - pxa3xx_freqs = freqs; - pxa3xx_freqs_num = num; - pxa3xx_freqs_table = table; - - return cpufreq_frequency_table_cpuinfo(policy, table); -} - -static void __update_core_freq(struct pxa3xx_freq_info *info) -{ - uint32_t mask = ACCR_XN_MASK | ACCR_XL_MASK; - uint32_t accr = ACCR; - uint32_t xclkcfg; - - accr &= ~(ACCR_XN_MASK | ACCR_XL_MASK | ACCR_XSPCLK_MASK); - accr |= ACCR_XN(info->core_xn) | ACCR_XL(info->core_xl); - - /* No clock until core PLL is re-locked */ - accr |= ACCR_XSPCLK(XSPCLK_NONE); - - xclkcfg = (info->core_xn == 2) ? 0x3 : 0x2; /* turbo bit */ - - ACCR = accr; - __asm__("mcr p14, 0, %0, c6, c0, 0\n" : : "r"(xclkcfg)); - - while ((ACSR & mask) != (accr & mask)) - cpu_relax(); -} - -static void __update_bus_freq(struct pxa3xx_freq_info *info) -{ - uint32_t mask; - uint32_t accr = ACCR; - - mask = ACCR_SMCFS_MASK | ACCR_SFLFS_MASK | ACCR_HSS_MASK | - ACCR_DMCFS_MASK; - - accr &= ~mask; - accr |= ACCR_SMCFS(info->smcfs) | ACCR_SFLFS(info->sflfs) | - ACCR_HSS(info->hss) | ACCR_DMCFS(info->dmcfs); - - ACCR = accr; - - while ((ACSR & mask) != (accr & mask)) - cpu_relax(); -} - -static int pxa3xx_cpufreq_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, pxa3xx_freqs_table); -} - -static unsigned int pxa3xx_cpufreq_get(unsigned int cpu) -{ - return pxa3xx_get_clk_frequency_khz(0); -} - -static int pxa3xx_cpufreq_set(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - struct pxa3xx_freq_info *next; - struct cpufreq_freqs freqs; - unsigned long flags; - int idx; - - if (policy->cpu != 0) - return -EINVAL; - - /* Lookup the next frequency */ - if (cpufreq_frequency_table_target(policy, pxa3xx_freqs_table, - target_freq, relation, &idx)) - return -EINVAL; - - next = &pxa3xx_freqs[idx]; - - freqs.old = policy->cur; - freqs.new = next->cpufreq_mhz * 1000; - freqs.cpu = policy->cpu; - - pr_debug("CPU frequency from %d MHz to %d MHz%s\n", - freqs.old / 1000, freqs.new / 1000, - (freqs.old == freqs.new) ? " (skipped)" : ""); - - if (freqs.old == target_freq) - return 0; - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - local_irq_save(flags); - __update_core_freq(next); - __update_bus_freq(next); - local_irq_restore(flags); - - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - return 0; -} - -static int pxa3xx_cpufreq_init(struct cpufreq_policy *policy) -{ - int ret = -EINVAL; - - /* set default policy and cpuinfo */ - policy->cpuinfo.min_freq = 104000; - policy->cpuinfo.max_freq = (cpu_is_pxa320()) ? 806000 : 624000; - policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */ - policy->max = pxa3xx_get_clk_frequency_khz(0); - policy->cur = policy->min = policy->max; - - if (cpu_is_pxa300() || cpu_is_pxa310()) - ret = setup_freqs_table(policy, ARRAY_AND_SIZE(pxa300_freqs)); - - if (cpu_is_pxa320()) - ret = setup_freqs_table(policy, ARRAY_AND_SIZE(pxa320_freqs)); - - if (ret) { - pr_err("failed to setup frequency table\n"); - return ret; - } - - pr_info("CPUFREQ support for PXA3xx initialized\n"); - return 0; -} - -static struct cpufreq_driver pxa3xx_cpufreq_driver = { - .verify = pxa3xx_cpufreq_verify, - .target = pxa3xx_cpufreq_set, - .init = pxa3xx_cpufreq_init, - .get = pxa3xx_cpufreq_get, - .name = "pxa3xx-cpufreq", -}; - -static int __init cpufreq_init(void) -{ - if (cpu_is_pxa3xx()) - return cpufreq_register_driver(&pxa3xx_cpufreq_driver); - - return 0; -} -module_init(cpufreq_init); - -static void __exit cpufreq_exit(void) -{ - cpufreq_unregister_driver(&pxa3xx_cpufreq_driver); -} -module_exit(cpufreq_exit); - -MODULE_DESCRIPTION("CPU frequency scaling driver for PXA3xx"); -MODULE_LICENSE("GPL"); diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index daa86d39ed9e..666094315ab1 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -1107,8 +1107,33 @@ struct resource pxa_resource_gpio[] = { }, }; -struct platform_device pxa_device_gpio = { - .name = "pxa-gpio", +struct platform_device pxa25x_device_gpio = { +#ifdef CONFIG_CPU_PXA26x + .name = "pxa26x-gpio", +#else + .name = "pxa25x-gpio", +#endif + .id = -1, + .num_resources = ARRAY_SIZE(pxa_resource_gpio), + .resource = pxa_resource_gpio, +}; + +struct platform_device pxa27x_device_gpio = { + .name = "pxa27x-gpio", + .id = -1, + .num_resources = ARRAY_SIZE(pxa_resource_gpio), + .resource = pxa_resource_gpio, +}; + +struct platform_device pxa3xx_device_gpio = { + .name = "pxa3xx-gpio", + .id = -1, + .num_resources = ARRAY_SIZE(pxa_resource_gpio), + .resource = pxa_resource_gpio, +}; + +struct platform_device pxa93x_device_gpio = { + .name = "pxa93x-gpio", .id = -1, .num_resources = ARRAY_SIZE(pxa_resource_gpio), .resource = pxa_resource_gpio, diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h index 1475db107254..0f3fd0d65b12 100644 --- a/arch/arm/mach-pxa/devices.h +++ b/arch/arm/mach-pxa/devices.h @@ -16,7 +16,6 @@ extern struct platform_device pxa_device_ficp; extern struct platform_device sa1100_device_rtc; extern struct platform_device pxa_device_rtc; extern struct platform_device pxa_device_ac97; -extern struct platform_device pxa_device_gpio; extern struct platform_device pxa27x_device_i2c_power; extern struct platform_device pxa27x_device_ohci; @@ -46,4 +45,9 @@ extern struct platform_device pxa_device_asoc_ssp2; extern struct platform_device pxa_device_asoc_ssp3; extern struct platform_device pxa_device_asoc_ssp4; +extern struct platform_device pxa25x_device_gpio; +extern struct platform_device pxa27x_device_gpio; +extern struct platform_device pxa3xx_device_gpio; +extern struct platform_device pxa93x_device_gpio; + void __init pxa_register_device(struct platform_device *dev, void *data); diff --git a/arch/arm/mach-pxa/include/mach/debug-macro.S b/arch/arm/mach-pxa/include/mach/debug-macro.S deleted file mode 100644 index 70b112e8ef68..000000000000 --- a/arch/arm/mach-pxa/include/mach/debug-macro.S +++ /dev/null @@ -1,23 +0,0 @@ -/* arch/arm/mach-pxa/include/mach/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - -#include "hardware.h" - - .macro addruart, rp, rv, tmp - mov \rp, #0x00100000 - orr \rv, \rp, #io_p2v(0x40000000) @ virtual - orr \rp, \rp, #0x40000000 @ physical - .endm - -#define UART_SHIFT 2 -#include <asm/hardware/debug-8250.S> diff --git a/arch/arm/mach-pxa/include/mach/generic.h b/arch/arm/mach-pxa/include/mach/generic.h new file mode 100644 index 000000000000..665542e0c9e2 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/generic.h @@ -0,0 +1 @@ +#include "../../generic.h" diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index 3f5171eaf67b..f2c28972084d 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -208,7 +208,11 @@ static struct clk_lookup pxa25x_clkregs[] = { INIT_CLKREG(&clk_pxa25x_gpio11, NULL, "GPIO11_CLK"), INIT_CLKREG(&clk_pxa25x_gpio12, NULL, "GPIO12_CLK"), INIT_CLKREG(&clk_pxa25x_mem, "pxa2xx-pcmcia", NULL), - INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL), +#ifdef CONFIG_CPU_PXA26x + INIT_CLKREG(&clk_dummy, "pxa26x-gpio", NULL), +#else + INIT_CLKREG(&clk_dummy, "pxa25x-gpio", NULL), +#endif INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), }; @@ -340,7 +344,8 @@ void __init pxa25x_map_io(void) } static struct pxa_gpio_platform_data pxa25x_gpio_info __initdata = { - .gpio_set_wake = gpio_set_wake, + .irq_base = PXA_GPIO_TO_IRQ(0), + .gpio_set_wake = gpio_set_wake, }; static struct platform_device *pxa25x_devices[] __initdata = { @@ -375,7 +380,7 @@ static int __init pxa25x_init(void) register_syscore_ops(&pxa2xx_mfp_syscore_ops); register_syscore_ops(&pxa2xx_clock_syscore_ops); - pxa_register_device(&pxa_device_gpio, &pxa25x_gpio_info); + pxa_register_device(&pxa25x_device_gpio, &pxa25x_gpio_info); ret = platform_add_devices(pxa25x_devices, ARRAY_SIZE(pxa25x_devices)); if (ret) diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 3203a9f5b4a2..301471a07a10 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -237,7 +237,7 @@ static struct clk_lookup pxa27x_clkregs[] = { INIT_CLKREG(&clk_pxa27x_im, NULL, "IMCLK"), INIT_CLKREG(&clk_pxa27x_memc, NULL, "MEMCLK"), INIT_CLKREG(&clk_pxa27x_mem, "pxa2xx-pcmcia", NULL), - INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL), + INIT_CLKREG(&clk_dummy, "pxa27x-gpio", NULL), INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), }; @@ -431,7 +431,8 @@ void __init pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info) } static struct pxa_gpio_platform_data pxa27x_gpio_info __initdata = { - .gpio_set_wake = gpio_set_wake, + .irq_base = PXA_GPIO_TO_IRQ(0), + .gpio_set_wake = gpio_set_wake, }; static struct platform_device *devices[] __initdata = { @@ -470,7 +471,7 @@ static int __init pxa27x_init(void) register_syscore_ops(&pxa2xx_mfp_syscore_ops); register_syscore_ops(&pxa2xx_clock_syscore_ops); - pxa_register_device(&pxa_device_gpio, &pxa27x_gpio_info); + pxa_register_device(&pxa27x_device_gpio, &pxa27x_gpio_info); ret = platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index 656a1bb16d14..87011f3de69d 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -15,6 +15,7 @@ #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> +#include <linux/gpio-pxa.h> #include <linux/pm.h> #include <linux/platform_device.h> #include <linux/irq.h> @@ -92,7 +93,8 @@ static struct clk_lookup pxa3xx_clkregs[] = { INIT_CLKREG(&clk_pxa3xx_mmc1, "pxa2xx-mci.0", NULL), INIT_CLKREG(&clk_pxa3xx_mmc2, "pxa2xx-mci.1", NULL), INIT_CLKREG(&clk_pxa3xx_smemc, "pxa2xx-pcmcia", NULL), - INIT_CLKREG(&clk_pxa3xx_gpio, "pxa-gpio", NULL), + INIT_CLKREG(&clk_pxa3xx_gpio, "pxa3xx-gpio", NULL), + INIT_CLKREG(&clk_pxa3xx_gpio, "pxa93x-gpio", NULL), INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), }; @@ -435,8 +437,11 @@ void __init pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info) pxa_register_device(&pxa3xx_device_i2c_power, info); } +static struct pxa_gpio_platform_data pxa3xx_gpio_pdata = { + .irq_base = PXA_GPIO_TO_IRQ(0), +}; + static struct platform_device *devices[] __initdata = { - &pxa_device_gpio, &pxa27x_device_udc, &pxa_device_pmu, &pxa_device_i2s, @@ -482,8 +487,18 @@ static int __init pxa3xx_init(void) register_syscore_ops(&pxa3xx_mfp_syscore_ops); register_syscore_ops(&pxa3xx_clock_syscore_ops); - if (!of_have_populated_dt()) - ret = platform_add_devices(devices, ARRAY_SIZE(devices)); + if (of_have_populated_dt()) + return 0; + + ret = platform_add_devices(devices, ARRAY_SIZE(devices)); + if (ret) + return ret; + if (cpu_is_pxa300() || cpu_is_pxa310() || cpu_is_pxa320()) { + platform_device_add_data(&pxa3xx_device_gpio, + &pxa3xx_gpio_pdata, + sizeof(pxa3xx_gpio_pdata)); + ret = platform_device_register(&pxa3xx_device_gpio); + } } return ret; diff --git a/arch/arm/mach-pxa/pxa930.c b/arch/arm/mach-pxa/pxa930.c index 8aeacf908784..ab624487cf39 100644 --- a/arch/arm/mach-pxa/pxa930.c +++ b/arch/arm/mach-pxa/pxa930.c @@ -12,12 +12,15 @@ #include <linux/module.h> #include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/irq.h> #include <linux/dma-mapping.h> +#include <linux/irq.h> +#include <linux/gpio-pxa.h> +#include <linux/platform_device.h> #include <mach/pxa930.h> +#include "devices.h" + static struct mfp_addr_map pxa930_mfp_addr_map[] __initdata = { MFP_ADDR(GPIO0, 0x02e0), @@ -190,11 +193,21 @@ static struct mfp_addr_map pxa935_mfp_addr_map[] __initdata = { MFP_ADDR_END, }; +static struct pxa_gpio_platform_data pxa93x_gpio_pdata = { + .irq_base = PXA_GPIO_TO_IRQ(0), +}; + static int __init pxa930_init(void) { + int ret = 0; + if (cpu_is_pxa93x()) { mfp_init_base(io_p2v(MFPR_BASE)); mfp_init_addr(pxa930_mfp_addr_map); + platform_device_add_data(&pxa93x_device_gpio, + &pxa93x_gpio_pdata, + sizeof(pxa93x_gpio_pdata)); + ret = platform_device_register(&pxa93x_device_gpio); } if (cpu_is_pxa935()) diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig index 14c1d47e1abf..d210c0f9c2c4 100644 --- a/arch/arm/mach-realview/Kconfig +++ b/arch/arm/mach-realview/Kconfig @@ -12,6 +12,8 @@ config REALVIEW_EB_A9MP bool "Support Multicore Cortex-A9 Tile" depends on MACH_REALVIEW_EB select CPU_V7 + select HAVE_ARM_SCU if SMP + select HAVE_ARM_TWD if LOCAL_TIMERS select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 help @@ -23,6 +25,8 @@ config REALVIEW_EB_ARM11MP depends on MACH_REALVIEW_EB select ARCH_HAS_BARRIERS if SMP select CPU_V6K + select HAVE_ARM_SCU if SMP + select HAVE_ARM_TWD if LOCAL_TIMERS select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 help @@ -43,6 +47,8 @@ config MACH_REALVIEW_PB11MP select ARCH_HAS_BARRIERS if SMP select ARM_GIC select CPU_V6K + select HAVE_ARM_SCU if SMP + select HAVE_ARM_TWD if LOCAL_TIMERS select HAVE_PATA_PLATFORM select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 @@ -85,6 +91,8 @@ config MACH_REALVIEW_PBX bool "Support RealView(R) Platform Baseboard Explore" select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !REALVIEW_HIGH_PHYS_OFFSET select ARM_GIC + select HAVE_ARM_SCU if SMP + select HAVE_ARM_TWD if LOCAL_TIMERS select HAVE_PATA_PLATFORM select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 diff --git a/arch/arm/mach-realview/hotplug.c b/arch/arm/mach-realview/hotplug.c index 53818e5cd3ad..ac22dd41b135 100644 --- a/arch/arm/mach-realview/hotplug.c +++ b/arch/arm/mach-realview/hotplug.c @@ -12,7 +12,6 @@ #include <linux/errno.h> #include <linux/smp.h> -#include <asm/cacheflush.h> #include <asm/cp15.h> #include <asm/smp_plat.h> @@ -20,7 +19,6 @@ static inline void cpu_enter_lowpower(void) { unsigned int v; - flush_cache_all(); asm volatile( " mcr p15, 0, %1, c7, c5, 0\n" " mcr p15, 0, %1, c7, c10, 4\n" diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index 37f513d1588e..f2f7088bfd22 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -30,29 +30,30 @@ config CPU_S3C2410 select S3C2410_CLOCK select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX select S3C2410_PM if PM + select SAMSUNG_HRT help Support for S3C2410 and S3C2410A family from the S3C24XX line of Samsung Mobile CPUs. config CPU_S3C2412 bool "SAMSUNG S3C2412" - depends on ARCH_S3C24XX select CPU_ARM926T select CPU_LLSERIAL_S3C2440 select S3C2412_DMA if S3C24XX_DMA select S3C2412_PM if PM + select SAMSUNG_HRT help Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line config CPU_S3C2416 bool "SAMSUNG S3C2416/S3C2450" - depends on ARCH_S3C24XX select CPU_ARM926T select CPU_LLSERIAL_S3C2440 select S3C2416_PM if PM select S3C2443_COMMON select S3C2443_DMA if S3C24XX_DMA select SAMSUNG_CLKSRC + select SAMSUNG_HRT help Support for the S3C2416 SoC from the S3C24XX line @@ -63,6 +64,7 @@ config CPU_S3C2440 select S3C2410_CLOCK select S3C2410_PM if PM select S3C2440_DMA if S3C24XX_DMA + select SAMSUNG_HRT help Support for S3C2440 Samsung Mobile CPU based systems. @@ -72,6 +74,7 @@ config CPU_S3C2442 select CPU_LLSERIAL_S3C2440 select S3C2410_CLOCK select S3C2410_PM if PM + select SAMSUNG_HRT help Support for S3C2442 Samsung Mobile CPU based systems. @@ -81,12 +84,12 @@ config CPU_S3C244X config CPU_S3C2443 bool "SAMSUNG S3C2443" - depends on ARCH_S3C24XX select CPU_ARM920T select CPU_LLSERIAL_S3C2440 select S3C2443_COMMON select S3C2443_DMA if S3C24XX_DMA select SAMSUNG_CLKSRC + select SAMSUNG_HRT help Support for the S3C2443 SoC from the S3C24XX line @@ -133,7 +136,6 @@ config S3C24XX_SETUP_TS config S3C24XX_DMA bool "S3C2410 DMA support" - depends on ARCH_S3C24XX select S3C_DMA help S3C2410 DMA support. This is needed for drivers like sound which @@ -142,7 +144,7 @@ config S3C24XX_DMA config S3C2410_DMA_DEBUG bool "S3C2410 DMA support debug" - depends on ARCH_S3C24XX && S3C2410_DMA + depends on S3C2410_DMA help Enable debugging output for the DMA code. This option sends info to the kernel log, at priority KERN_DEBUG. @@ -233,7 +235,7 @@ if CPU_S3C2410 config S3C2410_CPUFREQ bool - depends on CPU_FREQ_S3C24XX && CPU_S3C2410 + depends on CPU_FREQ_S3C24XX select S3C2410_CPUFREQ_UTILS help CPU Frequency scaling support for S3C2410 @@ -320,7 +322,6 @@ config PM_H1940 config MACH_N30 bool "Acer N30 family" - select MACH_N35 select S3C_DEV_NAND select S3C_DEV_USB_HOST help @@ -380,14 +381,13 @@ if CPU_S3C2412 config CPU_S3C2412_ONLY bool - depends on ARCH_S3C24XX && !CPU_S3C2410 && \ - !CPU_S3C2416 && !CPU_S3C2440 && !CPU_S3C2442 && \ - !CPU_S3C2443 && CPU_S3C2412 + depends on !CPU_S3C2410 && !CPU_S3C2416 && !CPU_S3C2440 && \ + !CPU_S3C2442 && !CPU_S3C2443 default y config S3C2412_CPUFREQ bool - depends on CPU_FREQ_S3C24XX && CPU_S3C2412 + depends on CPU_FREQ_S3C24XX default y select S3C2412_IOTIMING help @@ -401,6 +401,7 @@ config S3C2412_DMA config S3C2412_PM bool select S3C2412_PM_SLEEP + select SAMSUNG_WAKEMASK help Internal config node to apply S3C2412 power management @@ -642,7 +643,6 @@ comment "S3C2442 Boards" config MACH_NEO1973_GTA02 bool "Openmoko GTA02 / Freerunner phone" select I2C - select MACH_NEO1973 select MFD_PCF50633 select PCF50633_GPIO select POWER_SUPPLY @@ -663,10 +663,7 @@ config MACH_RX1950 help Say Y here if you're using HP iPAQ rx1950 -config SMDK2440_CPU2442 - bool "SMDM2440 with S3C2442 CPU module" - -endif # CPU_S3C2440 +endif # CPU_S3C2442 if CPU_S3C2443 || CPU_S3C2416 diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile index af53d27d5c36..6f46ecfc8396 100644 --- a/arch/arm/mach-s3c24xx/Makefile +++ b/arch/arm/mach-s3c24xx/Makefile @@ -14,7 +14,7 @@ obj- := # core -obj-y += common.o irq.o +obj-y += common.o obj-$(CONFIG_CPU_S3C2410) += s3c2410.o obj-$(CONFIG_S3C2410_CPUFREQ) += cpufreq-s3c2410.o @@ -22,7 +22,7 @@ obj-$(CONFIG_S3C2410_DMA) += dma-s3c2410.o obj-$(CONFIG_S3C2410_PLL) += pll-s3c2410.o obj-$(CONFIG_S3C2410_PM) += pm-s3c2410.o sleep-s3c2410.o -obj-$(CONFIG_CPU_S3C2412) += s3c2412.o irq-s3c2412.o clock-s3c2412.o +obj-$(CONFIG_CPU_S3C2412) += s3c2412.o clock-s3c2412.o obj-$(CONFIG_S3C2412_CPUFREQ) += cpufreq-s3c2412.o obj-$(CONFIG_S3C2412_DMA) += dma-s3c2412.o obj-$(CONFIG_S3C2412_PM) += pm-s3c2412.o @@ -31,9 +31,9 @@ obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep-s3c2412.o obj-$(CONFIG_CPU_S3C2416) += s3c2416.o clock-s3c2416.o obj-$(CONFIG_S3C2416_PM) += pm-s3c2416.o -obj-$(CONFIG_CPU_S3C2440) += s3c2440.o irq-s3c2440.o clock-s3c2440.o +obj-$(CONFIG_CPU_S3C2440) += s3c2440.o clock-s3c2440.o obj-$(CONFIG_CPU_S3C2442) += s3c2442.o -obj-$(CONFIG_CPU_S3C244X) += s3c244x.o irq-s3c244x.o clock-s3c244x.o +obj-$(CONFIG_CPU_S3C244X) += s3c244x.o clock-s3c244x.o obj-$(CONFIG_S3C2440_CPUFREQ) += cpufreq-s3c2440.o obj-$(CONFIG_S3C2440_DMA) += dma-s3c2440.o obj-$(CONFIG_S3C2440_PLL_12000000) += pll-s3c2440-12000000.o diff --git a/arch/arm/mach-s3c24xx/bast-irq.c b/arch/arm/mach-s3c24xx/bast-irq.c index c0daa9590b4c..cb1b791954de 100644 --- a/arch/arm/mach-s3c24xx/bast-irq.c +++ b/arch/arm/mach-s3c24xx/bast-irq.c @@ -34,8 +34,6 @@ #include <mach/hardware.h> #include <mach/regs-irq.h> -#include <plat/irq.h> - #include "bast.h" #define irqdbf(x...) diff --git a/arch/arm/mach-s3c24xx/clock-s3c2410.c b/arch/arm/mach-s3c24xx/clock-s3c2410.c index 641266f3d152..34fffdf6fc1d 100644 --- a/arch/arm/mach-s3c24xx/clock-s3c2410.c +++ b/arch/arm/mach-s3c24xx/clock-s3c2410.c @@ -40,7 +40,6 @@ #include <mach/regs-clock.h> #include <mach/regs-gpio.h> -#include <plat/s3c2410.h> #include <plat/clock.h> #include <plat/cpu.h> diff --git a/arch/arm/mach-s3c24xx/clock-s3c2412.c b/arch/arm/mach-s3c24xx/clock-s3c2412.c index d10b695a9066..2cc017da88fe 100644 --- a/arch/arm/mach-s3c24xx/clock-s3c2412.c +++ b/arch/arm/mach-s3c24xx/clock-s3c2412.c @@ -41,7 +41,6 @@ #include <mach/regs-clock.h> #include <mach/regs-gpio.h> -#include <plat/s3c2412.h> #include <plat/clock.h> #include <plat/cpu.h> diff --git a/arch/arm/mach-s3c24xx/clock-s3c2416.c b/arch/arm/mach-s3c24xx/clock-s3c2416.c index 14a81c2317a4..036056cea57c 100644 --- a/arch/arm/mach-s3c24xx/clock-s3c2416.c +++ b/arch/arm/mach-s3c24xx/clock-s3c2416.c @@ -14,7 +14,6 @@ #include <linux/init.h> #include <linux/clk.h> -#include <plat/s3c2416.h> #include <plat/clock.h> #include <plat/clock-clksrc.h> #include <plat/cpu.h> diff --git a/arch/arm/mach-s3c24xx/clock-s3c2440.c b/arch/arm/mach-s3c24xx/clock-s3c2440.c index 04b87ec92537..1069b5680826 100644 --- a/arch/arm/mach-s3c24xx/clock-s3c2440.c +++ b/arch/arm/mach-s3c24xx/clock-s3c2440.c @@ -123,6 +123,11 @@ static struct clk s3c2440_clk_ac97 = { .ctrlbit = S3C2440_CLKCON_AC97, }; +#define S3C24XX_VA_UART0 (S3C_VA_UART) +#define S3C24XX_VA_UART1 (S3C_VA_UART + 0x4000 ) +#define S3C24XX_VA_UART2 (S3C_VA_UART + 0x8000 ) +#define S3C24XX_VA_UART3 (S3C_VA_UART + 0xC000 ) + static unsigned long s3c2440_fclk_n_getrate(struct clk *clk) { unsigned long ucon0, ucon1, ucon2, divisor; diff --git a/arch/arm/mach-s3c24xx/clock-s3c2443.c b/arch/arm/mach-s3c24xx/clock-s3c2443.c index bdaba59b42dc..0a53051b0787 100644 --- a/arch/arm/mach-s3c24xx/clock-s3c2443.c +++ b/arch/arm/mach-s3c24xx/clock-s3c2443.c @@ -41,7 +41,6 @@ #include <plat/cpu-freq.h> -#include <plat/s3c2443.h> #include <plat/clock.h> #include <plat/clock-clksrc.h> #include <plat/cpu.h> diff --git a/arch/arm/mach-s3c24xx/common-smdk.c b/arch/arm/mach-s3c24xx/common-smdk.c index 3b2cf6db3634..404444dd3840 100644 --- a/arch/arm/mach-s3c24xx/common-smdk.c +++ b/arch/arm/mach-s3c24xx/common-smdk.c @@ -41,11 +41,12 @@ #include <linux/platform_data/mtd-nand-s3c2410.h> -#include <plat/common-smdk.h> #include <plat/gpio-cfg.h> #include <plat/devs.h> #include <plat/pm.h> +#include "common-smdk.h" + /* LED devices */ static struct s3c24xx_led_platdata smdk_pdata_led4 = { diff --git a/arch/arm/plat-samsung/include/plat/common-smdk.h b/arch/arm/mach-s3c24xx/common-smdk.h index ba028f1ed30b..98f733e1cb42 100644 --- a/arch/arm/plat-samsung/include/plat/common-smdk.h +++ b/arch/arm/mach-s3c24xx/common-smdk.h @@ -1,5 +1,4 @@ -/* linux/arch/arm/plat-samsung/include/plat/common-smdk.h - * +/* * Copyright (c) 2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c index 6bcf87f65f9e..c157103ed8eb 100644 --- a/arch/arm/mach-s3c24xx/common.c +++ b/arch/arm/mach-s3c24xx/common.c @@ -47,14 +47,11 @@ #include <plat/cpu.h> #include <plat/devs.h> #include <plat/clock.h> -#include <plat/s3c2410.h> -#include <plat/s3c2412.h> -#include <plat/s3c2416.h> -#include <plat/s3c244x.h> -#include <plat/s3c2443.h> #include <plat/cpu-freq.h> #include <plat/pll.h> +#include "common.h" + /* table of supported CPUs */ static const char name_s3c2410[] = "S3C2410"; @@ -239,6 +236,11 @@ void __init s3c24xx_init_io(struct map_desc *mach_desc, int size) /* Serial port registrations */ +#define S3C2410_PA_UART0 (S3C24XX_PA_UART) +#define S3C2410_PA_UART1 (S3C24XX_PA_UART + 0x4000 ) +#define S3C2410_PA_UART2 (S3C24XX_PA_UART + 0x8000 ) +#define S3C2443_PA_UART3 (S3C24XX_PA_UART + 0xC000 ) + static struct resource s3c2410_uart0_resource[] = { [0] = DEFINE_RES_MEM(S3C2410_PA_UART0, SZ_16K), [1] = DEFINE_RES_NAMED(IRQ_S3CUART_RX0, \ diff --git a/arch/arm/mach-s3c24xx/common.h b/arch/arm/mach-s3c24xx/common.h index ed6276fcaa3b..307c3714be55 100644 --- a/arch/arm/mach-s3c24xx/common.h +++ b/arch/arm/mach-s3c24xx/common.h @@ -12,8 +12,98 @@ #ifndef __ARCH_ARM_MACH_S3C24XX_COMMON_H #define __ARCH_ARM_MACH_S3C24XX_COMMON_H __FILE__ -void s3c2410_restart(char mode, const char *cmd); -void s3c244x_restart(char mode, const char *cmd); +struct s3c2410_uartcfg; + +#ifdef CONFIG_CPU_S3C2410 +extern int s3c2410_init(void); +extern int s3c2410a_init(void); +extern void s3c2410_map_io(void); +extern void s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no); +extern void s3c2410_init_clocks(int xtal); +extern void s3c2410_restart(char mode, const char *cmd); +extern void s3c2410_init_irq(void); +#else +#define s3c2410_init_clocks NULL +#define s3c2410_init_uarts NULL +#define s3c2410_map_io NULL +#define s3c2410_init NULL +#define s3c2410a_init NULL +#endif + +#ifdef CONFIG_CPU_S3C2412 +extern int s3c2412_init(void); +extern void s3c2412_map_io(void); +extern void s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no); +extern void s3c2412_init_clocks(int xtal); +extern int s3c2412_baseclk_add(void); +extern void s3c2412_restart(char mode, const char *cmd); +extern void s3c2412_init_irq(void); +#else +#define s3c2412_init_clocks NULL +#define s3c2412_init_uarts NULL +#define s3c2412_map_io NULL +#define s3c2412_init NULL +#endif + +#ifdef CONFIG_CPU_S3C2416 +extern int s3c2416_init(void); +extern void s3c2416_map_io(void); +extern void s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no); +extern void s3c2416_init_clocks(int xtal); +extern int s3c2416_baseclk_add(void); +extern void s3c2416_restart(char mode, const char *cmd); +extern void s3c2416_init_irq(void); + +extern struct syscore_ops s3c2416_irq_syscore_ops; +#else +#define s3c2416_init_clocks NULL +#define s3c2416_init_uarts NULL +#define s3c2416_map_io NULL +#define s3c2416_init NULL +#endif + +#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442) +extern void s3c244x_map_io(void); +extern void s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no); +extern void s3c244x_init_clocks(int xtal); +extern void s3c244x_restart(char mode, const char *cmd); +#else +#define s3c244x_init_clocks NULL +#define s3c244x_init_uarts NULL +#endif + +#ifdef CONFIG_CPU_S3C2440 +extern int s3c2440_init(void); +extern void s3c2440_map_io(void); +extern void s3c2440_init_irq(void); +#else +#define s3c2440_init NULL +#define s3c2440_map_io NULL +#endif + +#ifdef CONFIG_CPU_S3C2442 +extern int s3c2442_init(void); +extern void s3c2442_map_io(void); +extern void s3c2442_init_irq(void); +#else +#define s3c2442_init NULL +#define s3c2442_map_io NULL +#endif + +#ifdef CONFIG_CPU_S3C2443 +extern int s3c2443_init(void); +extern void s3c2443_map_io(void); +extern void s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no); +extern void s3c2443_init_clocks(int xtal); +extern int s3c2443_baseclk_add(void); +extern void s3c2443_restart(char mode, const char *cmd); +extern void s3c2443_init_irq(void); +#else +#define s3c2443_init_clocks NULL +#define s3c2443_init_uarts NULL +#define s3c2443_map_io NULL +#define s3c2443_init NULL +#endif extern struct syscore_ops s3c24xx_irq_syscore_ops; diff --git a/arch/arm/mach-s3c24xx/cpufreq.c b/arch/arm/mach-s3c24xx/cpufreq.c index 5f181e733eee..3c0e78ede0da 100644 --- a/arch/arm/mach-s3c24xx/cpufreq.c +++ b/arch/arm/mach-s3c24xx/cpufreq.c @@ -204,7 +204,6 @@ static int s3c_cpufreq_settarget(struct cpufreq_policy *policy, freqs.old = cpu_cur.freq; freqs.new = cpu_new.freq; - freqs.freqs.cpu = 0; freqs.freqs.old = cpu_cur.freq.armclk / 1000; freqs.freqs.new = cpu_new.freq.armclk / 1000; @@ -218,9 +217,7 @@ static int s3c_cpufreq_settarget(struct cpufreq_policy *policy, s3c_cpufreq_updateclk(clk_pclk, cpu_new.freq.pclk); /* start the frequency change */ - - if (policy) - cpufreq_notify_transition(&freqs.freqs, CPUFREQ_PRECHANGE); + cpufreq_notify_transition(policy, &freqs.freqs, CPUFREQ_PRECHANGE); /* If hclk is staying the same, then we do not need to * re-write the IO or the refresh timings whilst we are changing @@ -264,8 +261,7 @@ static int s3c_cpufreq_settarget(struct cpufreq_policy *policy, local_irq_restore(flags); /* notify everyone we've done this */ - if (policy) - cpufreq_notify_transition(&freqs.freqs, CPUFREQ_POSTCHANGE); + cpufreq_notify_transition(policy, &freqs.freqs, CPUFREQ_POSTCHANGE); s3c_freq_dbg("%s: finished\n", __func__); return 0; diff --git a/arch/arm/mach-s3c24xx/dma-s3c2410.c b/arch/arm/mach-s3c24xx/dma-s3c2410.c index 25d085adc93c..30aa53ff07a6 100644 --- a/arch/arm/mach-s3c24xx/dma-s3c2410.c +++ b/arch/arm/mach-s3c24xx/dma-s3c2410.c @@ -25,11 +25,8 @@ #include <plat/regs-serial.h> #include <mach/regs-gpio.h> -#include <plat/regs-ac97.h> #include <plat/regs-dma.h> #include <mach/regs-lcd.h> -#include <mach/regs-sdi.h> -#include <plat/regs-iis.h> #include <plat/regs-spi.h> static struct s3c24xx_dma_map __initdata s3c2410_dma_mappings[] = { diff --git a/arch/arm/mach-s3c24xx/dma-s3c2412.c b/arch/arm/mach-s3c24xx/dma-s3c2412.c index d2408ba372cb..ab1700ec8e64 100644 --- a/arch/arm/mach-s3c24xx/dma-s3c2412.c +++ b/arch/arm/mach-s3c24xx/dma-s3c2412.c @@ -25,11 +25,8 @@ #include <plat/regs-serial.h> #include <mach/regs-gpio.h> -#include <plat/regs-ac97.h> #include <plat/regs-dma.h> #include <mach/regs-lcd.h> -#include <mach/regs-sdi.h> -#include <plat/regs-iis.h> #include <plat/regs-spi.h> #define MAP(x) { (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID } diff --git a/arch/arm/mach-s3c24xx/dma-s3c2440.c b/arch/arm/mach-s3c24xx/dma-s3c2440.c index 0b86e74d104f..cd25de28804c 100644 --- a/arch/arm/mach-s3c24xx/dma-s3c2440.c +++ b/arch/arm/mach-s3c24xx/dma-s3c2440.c @@ -25,11 +25,8 @@ #include <plat/regs-serial.h> #include <mach/regs-gpio.h> -#include <plat/regs-ac97.h> #include <plat/regs-dma.h> #include <mach/regs-lcd.h> -#include <mach/regs-sdi.h> -#include <plat/regs-iis.h> #include <plat/regs-spi.h> static struct s3c24xx_dma_map __initdata s3c2440_dma_mappings[] = { diff --git a/arch/arm/mach-s3c24xx/dma-s3c2443.c b/arch/arm/mach-s3c24xx/dma-s3c2443.c index 05536254a3f8..5fe3539dc2b5 100644 --- a/arch/arm/mach-s3c24xx/dma-s3c2443.c +++ b/arch/arm/mach-s3c24xx/dma-s3c2443.c @@ -25,11 +25,8 @@ #include <plat/regs-serial.h> #include <mach/regs-gpio.h> -#include <plat/regs-ac97.h> #include <plat/regs-dma.h> #include <mach/regs-lcd.h> -#include <mach/regs-sdi.h> -#include <plat/regs-iis.h> #include <plat/regs-spi.h> #define MAP(x) { \ diff --git a/arch/arm/mach-s3c24xx/include/mach/debug-macro.S b/arch/arm/mach-s3c24xx/include/mach/debug-macro.S index 13ed33c69113..2558952e3147 100644 --- a/arch/arm/mach-s3c24xx/include/mach/debug-macro.S +++ b/arch/arm/mach-s3c24xx/include/mach/debug-macro.S @@ -98,4 +98,4 @@ /* include the reset of the code which will do the work */ -#include <plat/debug-macro.S> +#include <debug/samsung.S> diff --git a/arch/arm/mach-s3c24xx/include/mach/dma.h b/arch/arm/mach-s3c24xx/include/mach/dma.h index 6b72d5a4b377..b55da1d8cd8f 100644 --- a/arch/arm/mach-s3c24xx/include/mach/dma.h +++ b/arch/arm/mach-s3c24xx/include/mach/dma.h @@ -24,7 +24,6 @@ */ enum dma_ch { - DMACH_DT_PROP = -1, /* not yet supported, do not use */ DMACH_XD0 = 0, DMACH_XD1, DMACH_SDI, diff --git a/arch/arm/mach-s3c24xx/include/mach/entry-macro.S b/arch/arm/mach-s3c24xx/include/mach/entry-macro.S deleted file mode 100644 index 6a21beeba1da..000000000000 --- a/arch/arm/mach-s3c24xx/include/mach/entry-macro.S +++ /dev/null @@ -1,70 +0,0 @@ -/* - * arch/arm/mach-s3c2410/include/mach/entry-macro.S - * - * Low-level IRQ helper macros for S3C2410-based platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. -*/ - -/* We have a problem that the INTOFFSET register does not always - * show one interrupt. Occasionally we get two interrupts through - * the prioritiser, and this causes the INTOFFSET register to show - * what looks like the logical-or of the two interrupt numbers. - * - * Thanks to Klaus, Shannon, et al for helping to debug this problem -*/ - -#define INTPND (0x10) -#define INTOFFSET (0x14) - -#include <mach/hardware.h> -#include <asm/irq.h> - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - - mov \base, #S3C24XX_VA_IRQ - - @@ try the interrupt offset register, since it is there - - ldr \irqstat, [\base, #INTPND ] - teq \irqstat, #0 - beq 1002f - ldr \irqnr, [\base, #INTOFFSET ] - mov \tmp, #1 - tst \irqstat, \tmp, lsl \irqnr - bne 1001f - - @@ the number specified is not a valid irq, so try - @@ and work it out for ourselves - - mov \irqnr, #0 @@ start here - - @@ work out which irq (if any) we got - - movs \tmp, \irqstat, lsl#16 - addeq \irqnr, \irqnr, #16 - moveq \irqstat, \irqstat, lsr#16 - tst \irqstat, #0xff - addeq \irqnr, \irqnr, #8 - moveq \irqstat, \irqstat, lsr#8 - tst \irqstat, #0xf - addeq \irqnr, \irqnr, #4 - moveq \irqstat, \irqstat, lsr#4 - tst \irqstat, #0x3 - addeq \irqnr, \irqnr, #2 - moveq \irqstat, \irqstat, lsr#2 - tst \irqstat, #0x1 - addeq \irqnr, \irqnr, #1 - - @@ we have the value -1001: - adds \irqnr, \irqnr, #IRQ_EINT0 -1002: - @@ exit here, Z flag unset if IRQ - - .endm diff --git a/arch/arm/mach-s3c24xx/include/mach/irqs.h b/arch/arm/mach-s3c24xx/include/mach/irqs.h index 1e73f5fa8659..b6dd4cb5a2ec 100644 --- a/arch/arm/mach-s3c24xx/include/mach/irqs.h +++ b/arch/arm/mach-s3c24xx/include/mach/irqs.h @@ -59,49 +59,53 @@ #define IRQ_ADCPARENT S3C2410_IRQ(31) /* interrupts generated from the external interrupts sources */ -#define IRQ_EINT4 S3C2410_IRQ(32) /* 48 */ -#define IRQ_EINT5 S3C2410_IRQ(33) -#define IRQ_EINT6 S3C2410_IRQ(34) -#define IRQ_EINT7 S3C2410_IRQ(35) -#define IRQ_EINT8 S3C2410_IRQ(36) -#define IRQ_EINT9 S3C2410_IRQ(37) -#define IRQ_EINT10 S3C2410_IRQ(38) -#define IRQ_EINT11 S3C2410_IRQ(39) -#define IRQ_EINT12 S3C2410_IRQ(40) -#define IRQ_EINT13 S3C2410_IRQ(41) -#define IRQ_EINT14 S3C2410_IRQ(42) -#define IRQ_EINT15 S3C2410_IRQ(43) -#define IRQ_EINT16 S3C2410_IRQ(44) -#define IRQ_EINT17 S3C2410_IRQ(45) -#define IRQ_EINT18 S3C2410_IRQ(46) -#define IRQ_EINT19 S3C2410_IRQ(47) -#define IRQ_EINT20 S3C2410_IRQ(48) /* 64 */ -#define IRQ_EINT21 S3C2410_IRQ(49) -#define IRQ_EINT22 S3C2410_IRQ(50) -#define IRQ_EINT23 S3C2410_IRQ(51) +#define IRQ_EINT0_2412 S3C2410_IRQ(32) +#define IRQ_EINT1_2412 S3C2410_IRQ(33) +#define IRQ_EINT2_2412 S3C2410_IRQ(34) +#define IRQ_EINT3_2412 S3C2410_IRQ(35) +#define IRQ_EINT4 S3C2410_IRQ(36) /* 52 */ +#define IRQ_EINT5 S3C2410_IRQ(37) +#define IRQ_EINT6 S3C2410_IRQ(38) +#define IRQ_EINT7 S3C2410_IRQ(39) +#define IRQ_EINT8 S3C2410_IRQ(40) +#define IRQ_EINT9 S3C2410_IRQ(41) +#define IRQ_EINT10 S3C2410_IRQ(42) +#define IRQ_EINT11 S3C2410_IRQ(43) +#define IRQ_EINT12 S3C2410_IRQ(44) +#define IRQ_EINT13 S3C2410_IRQ(45) +#define IRQ_EINT14 S3C2410_IRQ(46) +#define IRQ_EINT15 S3C2410_IRQ(47) +#define IRQ_EINT16 S3C2410_IRQ(48) +#define IRQ_EINT17 S3C2410_IRQ(49) +#define IRQ_EINT18 S3C2410_IRQ(50) +#define IRQ_EINT19 S3C2410_IRQ(51) +#define IRQ_EINT20 S3C2410_IRQ(52) /* 68 */ +#define IRQ_EINT21 S3C2410_IRQ(53) +#define IRQ_EINT22 S3C2410_IRQ(54) +#define IRQ_EINT23 S3C2410_IRQ(55) #define IRQ_EINT_BIT(x) ((x) - IRQ_EINT4 + 4) #define IRQ_EINT(x) (((x) >= 4) ? (IRQ_EINT4 + (x) - 4) : (IRQ_EINT0 + (x))) -#define IRQ_LCD_FIFO S3C2410_IRQ(52) -#define IRQ_LCD_FRAME S3C2410_IRQ(53) +#define IRQ_LCD_FIFO S3C2410_IRQ(56) +#define IRQ_LCD_FRAME S3C2410_IRQ(57) /* IRQs for the interal UARTs, and ADC * these need to be ordered in number of appearance in the * SUBSRC mask register */ -#define S3C2410_IRQSUB(x) S3C2410_IRQ((x)+54) +#define S3C2410_IRQSUB(x) S3C2410_IRQ((x)+58) -#define IRQ_S3CUART_RX0 S3C2410_IRQSUB(0) /* 70 */ +#define IRQ_S3CUART_RX0 S3C2410_IRQSUB(0) /* 74 */ #define IRQ_S3CUART_TX0 S3C2410_IRQSUB(1) #define IRQ_S3CUART_ERR0 S3C2410_IRQSUB(2) -#define IRQ_S3CUART_RX1 S3C2410_IRQSUB(3) /* 73 */ +#define IRQ_S3CUART_RX1 S3C2410_IRQSUB(3) /* 77 */ #define IRQ_S3CUART_TX1 S3C2410_IRQSUB(4) #define IRQ_S3CUART_ERR1 S3C2410_IRQSUB(5) -#define IRQ_S3CUART_RX2 S3C2410_IRQSUB(6) /* 76 */ +#define IRQ_S3CUART_RX2 S3C2410_IRQSUB(6) /* 80 */ #define IRQ_S3CUART_TX2 S3C2410_IRQSUB(7) #define IRQ_S3CUART_ERR2 S3C2410_IRQSUB(8) @@ -136,7 +140,7 @@ /* second interrupt-register of s3c2416/s3c2450 */ -#define S3C2416_IRQ(x) S3C2410_IRQ((x) + 54 + 29) +#define S3C2416_IRQ(x) S3C2410_IRQ((x) + 58 + 29) #define IRQ_S3C2416_2D S3C2416_IRQ(0) #define IRQ_S3C2416_IIC1 S3C2416_IRQ(1) #define IRQ_S3C2416_RESERVED2 S3C2416_IRQ(2) diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-sdi.h b/arch/arm/mach-s3c24xx/include/mach/regs-sdi.h deleted file mode 100644 index cbf2d8884e30..000000000000 --- a/arch/arm/mach-s3c24xx/include/mach/regs-sdi.h +++ /dev/null @@ -1,127 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-sdi.h - * - * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk> - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2410 MMC/SDIO register definitions -*/ - -#ifndef __ASM_ARM_REGS_SDI -#define __ASM_ARM_REGS_SDI "regs-sdi.h" - -#define S3C2410_SDICON (0x00) -#define S3C2410_SDIPRE (0x04) -#define S3C2410_SDICMDARG (0x08) -#define S3C2410_SDICMDCON (0x0C) -#define S3C2410_SDICMDSTAT (0x10) -#define S3C2410_SDIRSP0 (0x14) -#define S3C2410_SDIRSP1 (0x18) -#define S3C2410_SDIRSP2 (0x1C) -#define S3C2410_SDIRSP3 (0x20) -#define S3C2410_SDITIMER (0x24) -#define S3C2410_SDIBSIZE (0x28) -#define S3C2410_SDIDCON (0x2C) -#define S3C2410_SDIDCNT (0x30) -#define S3C2410_SDIDSTA (0x34) -#define S3C2410_SDIFSTA (0x38) - -#define S3C2410_SDIDATA (0x3C) -#define S3C2410_SDIIMSK (0x40) - -#define S3C2440_SDIDATA (0x40) -#define S3C2440_SDIIMSK (0x3C) - -#define S3C2440_SDICON_SDRESET (1<<8) -#define S3C2440_SDICON_MMCCLOCK (1<<5) -#define S3C2410_SDICON_BYTEORDER (1<<4) -#define S3C2410_SDICON_SDIOIRQ (1<<3) -#define S3C2410_SDICON_RWAITEN (1<<2) -#define S3C2410_SDICON_FIFORESET (1<<1) -#define S3C2410_SDICON_CLOCKTYPE (1<<0) - -#define S3C2410_SDICMDCON_ABORT (1<<12) -#define S3C2410_SDICMDCON_WITHDATA (1<<11) -#define S3C2410_SDICMDCON_LONGRSP (1<<10) -#define S3C2410_SDICMDCON_WAITRSP (1<<9) -#define S3C2410_SDICMDCON_CMDSTART (1<<8) -#define S3C2410_SDICMDCON_SENDERHOST (1<<6) -#define S3C2410_SDICMDCON_INDEX (0x3f) - -#define S3C2410_SDICMDSTAT_CRCFAIL (1<<12) -#define S3C2410_SDICMDSTAT_CMDSENT (1<<11) -#define S3C2410_SDICMDSTAT_CMDTIMEOUT (1<<10) -#define S3C2410_SDICMDSTAT_RSPFIN (1<<9) -#define S3C2410_SDICMDSTAT_XFERING (1<<8) -#define S3C2410_SDICMDSTAT_INDEX (0xff) - -#define S3C2440_SDIDCON_DS_BYTE (0<<22) -#define S3C2440_SDIDCON_DS_HALFWORD (1<<22) -#define S3C2440_SDIDCON_DS_WORD (2<<22) -#define S3C2410_SDIDCON_IRQPERIOD (1<<21) -#define S3C2410_SDIDCON_TXAFTERRESP (1<<20) -#define S3C2410_SDIDCON_RXAFTERCMD (1<<19) -#define S3C2410_SDIDCON_BUSYAFTERCMD (1<<18) -#define S3C2410_SDIDCON_BLOCKMODE (1<<17) -#define S3C2410_SDIDCON_WIDEBUS (1<<16) -#define S3C2410_SDIDCON_DMAEN (1<<15) -#define S3C2410_SDIDCON_STOP (1<<14) -#define S3C2440_SDIDCON_DATSTART (1<<14) -#define S3C2410_SDIDCON_DATMODE (3<<12) -#define S3C2410_SDIDCON_BLKNUM (0x7ff) - -/* constants for S3C2410_SDIDCON_DATMODE */ -#define S3C2410_SDIDCON_XFER_READY (0<<12) -#define S3C2410_SDIDCON_XFER_CHKSTART (1<<12) -#define S3C2410_SDIDCON_XFER_RXSTART (2<<12) -#define S3C2410_SDIDCON_XFER_TXSTART (3<<12) - -#define S3C2410_SDIDCON_BLKNUM_MASK (0xFFF) -#define S3C2410_SDIDCNT_BLKNUM_SHIFT (12) - -#define S3C2410_SDIDSTA_RDYWAITREQ (1<<10) -#define S3C2410_SDIDSTA_SDIOIRQDETECT (1<<9) -#define S3C2410_SDIDSTA_FIFOFAIL (1<<8) /* reserved on 2440 */ -#define S3C2410_SDIDSTA_CRCFAIL (1<<7) -#define S3C2410_SDIDSTA_RXCRCFAIL (1<<6) -#define S3C2410_SDIDSTA_DATATIMEOUT (1<<5) -#define S3C2410_SDIDSTA_XFERFINISH (1<<4) -#define S3C2410_SDIDSTA_BUSYFINISH (1<<3) -#define S3C2410_SDIDSTA_SBITERR (1<<2) /* reserved on 2410a/2440 */ -#define S3C2410_SDIDSTA_TXDATAON (1<<1) -#define S3C2410_SDIDSTA_RXDATAON (1<<0) - -#define S3C2440_SDIFSTA_FIFORESET (1<<16) -#define S3C2440_SDIFSTA_FIFOFAIL (3<<14) /* 3 is correct (2 bits) */ -#define S3C2410_SDIFSTA_TFDET (1<<13) -#define S3C2410_SDIFSTA_RFDET (1<<12) -#define S3C2410_SDIFSTA_TFHALF (1<<11) -#define S3C2410_SDIFSTA_TFEMPTY (1<<10) -#define S3C2410_SDIFSTA_RFLAST (1<<9) -#define S3C2410_SDIFSTA_RFFULL (1<<8) -#define S3C2410_SDIFSTA_RFHALF (1<<7) -#define S3C2410_SDIFSTA_COUNTMASK (0x7f) - -#define S3C2410_SDIIMSK_RESPONSECRC (1<<17) -#define S3C2410_SDIIMSK_CMDSENT (1<<16) -#define S3C2410_SDIIMSK_CMDTIMEOUT (1<<15) -#define S3C2410_SDIIMSK_RESPONSEND (1<<14) -#define S3C2410_SDIIMSK_READWAIT (1<<13) -#define S3C2410_SDIIMSK_SDIOIRQ (1<<12) -#define S3C2410_SDIIMSK_FIFOFAIL (1<<11) -#define S3C2410_SDIIMSK_CRCSTATUS (1<<10) -#define S3C2410_SDIIMSK_DATACRC (1<<9) -#define S3C2410_SDIIMSK_DATATIMEOUT (1<<8) -#define S3C2410_SDIIMSK_DATAFINISH (1<<7) -#define S3C2410_SDIIMSK_BUSYFINISH (1<<6) -#define S3C2410_SDIIMSK_SBITERR (1<<5) /* reserved 2440/2410a */ -#define S3C2410_SDIIMSK_TXFIFOHALF (1<<4) -#define S3C2410_SDIIMSK_TXFIFOEMPTY (1<<3) -#define S3C2410_SDIIMSK_RXFIFOLAST (1<<2) -#define S3C2410_SDIIMSK_RXFIFOFULL (1<<1) -#define S3C2410_SDIIMSK_RXFIFOHALF (1<<0) - -#endif /* __ASM_ARM_REGS_SDI */ diff --git a/arch/arm/mach-s3c24xx/irq-pm.c b/arch/arm/mach-s3c24xx/irq-pm.c index e1199599873e..b91341ef2b2e 100644 --- a/arch/arm/mach-s3c24xx/irq-pm.c +++ b/arch/arm/mach-s3c24xx/irq-pm.c @@ -16,10 +16,15 @@ #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/syscore_ops.h> +#include <linux/io.h> #include <plat/cpu.h> #include <plat/pm.h> -#include <plat/irq.h> +#include <plat/map-base.h> +#include <plat/map-s3c.h> + +#include <mach/regs-irq.h> +#include <mach/regs-gpio.h> #include <asm/irq.h> diff --git a/arch/arm/mach-s3c24xx/irq-s3c2412.c b/arch/arm/mach-s3c24xx/irq-s3c2412.c deleted file mode 100644 index 67d763178d3f..000000000000 --- a/arch/arm/mach-s3c24xx/irq-s3c2412.c +++ /dev/null @@ -1,215 +0,0 @@ -/* linux/arch/arm/mach-s3c2412/irq.c - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/device.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <asm/irq.h> - -#include <asm/mach/irq.h> - -#include <mach/regs-irq.h> -#include <mach/regs-gpio.h> - -#include <plat/cpu.h> -#include <plat/irq.h> -#include <plat/pm.h> - -#include "s3c2412-power.h" - -#define INTMSK(start, end) ((1 << ((end) + 1 - (start))) - 1) -#define INTMSK_SUB(start, end) (INTMSK(start, end) << ((start - S3C2410_IRQSUB(0)))) - -/* the s3c2412 changes the behaviour of IRQ_EINT0 through IRQ_EINT3 by - * having them turn up in both the INT* and the EINT* registers. Whilst - * both show the status, they both now need to be acked when the IRQs - * go off. -*/ - -static void -s3c2412_irq_mask(struct irq_data *data) -{ - unsigned long bitval = 1UL << (data->irq - IRQ_EINT0); - unsigned long mask; - - mask = __raw_readl(S3C2410_INTMSK); - __raw_writel(mask | bitval, S3C2410_INTMSK); - - mask = __raw_readl(S3C2412_EINTMASK); - __raw_writel(mask | bitval, S3C2412_EINTMASK); -} - -static inline void -s3c2412_irq_ack(struct irq_data *data) -{ - unsigned long bitval = 1UL << (data->irq - IRQ_EINT0); - - __raw_writel(bitval, S3C2412_EINTPEND); - __raw_writel(bitval, S3C2410_SRCPND); - __raw_writel(bitval, S3C2410_INTPND); -} - -static inline void -s3c2412_irq_maskack(struct irq_data *data) -{ - unsigned long bitval = 1UL << (data->irq - IRQ_EINT0); - unsigned long mask; - - mask = __raw_readl(S3C2410_INTMSK); - __raw_writel(mask|bitval, S3C2410_INTMSK); - - mask = __raw_readl(S3C2412_EINTMASK); - __raw_writel(mask | bitval, S3C2412_EINTMASK); - - __raw_writel(bitval, S3C2412_EINTPEND); - __raw_writel(bitval, S3C2410_SRCPND); - __raw_writel(bitval, S3C2410_INTPND); -} - -static void -s3c2412_irq_unmask(struct irq_data *data) -{ - unsigned long bitval = 1UL << (data->irq - IRQ_EINT0); - unsigned long mask; - - mask = __raw_readl(S3C2412_EINTMASK); - __raw_writel(mask & ~bitval, S3C2412_EINTMASK); - - mask = __raw_readl(S3C2410_INTMSK); - __raw_writel(mask & ~bitval, S3C2410_INTMSK); -} - -static struct irq_chip s3c2412_irq_eint0t4 = { - .irq_ack = s3c2412_irq_ack, - .irq_mask = s3c2412_irq_mask, - .irq_unmask = s3c2412_irq_unmask, - .irq_set_wake = s3c_irq_wake, - .irq_set_type = s3c_irqext_type, -}; - -#define INTBIT(x) (1 << ((x) - S3C2410_IRQSUB(0))) - -/* CF and SDI sub interrupts */ - -static void s3c2412_irq_demux_cfsdi(unsigned int irq, struct irq_desc *desc) -{ - unsigned int subsrc, submsk; - - subsrc = __raw_readl(S3C2410_SUBSRCPND); - submsk = __raw_readl(S3C2410_INTSUBMSK); - - subsrc &= ~submsk; - - if (subsrc & INTBIT(IRQ_S3C2412_SDI)) - generic_handle_irq(IRQ_S3C2412_SDI); - - if (subsrc & INTBIT(IRQ_S3C2412_CF)) - generic_handle_irq(IRQ_S3C2412_CF); -} - -#define INTMSK_CFSDI (1UL << (IRQ_S3C2412_CFSDI - IRQ_EINT0)) -#define SUBMSK_CFSDI INTMSK_SUB(IRQ_S3C2412_SDI, IRQ_S3C2412_CF) - -static void s3c2412_irq_cfsdi_mask(struct irq_data *data) -{ - s3c_irqsub_mask(data->irq, INTMSK_CFSDI, SUBMSK_CFSDI); -} - -static void s3c2412_irq_cfsdi_unmask(struct irq_data *data) -{ - s3c_irqsub_unmask(data->irq, INTMSK_CFSDI); -} - -static void s3c2412_irq_cfsdi_ack(struct irq_data *data) -{ - s3c_irqsub_maskack(data->irq, INTMSK_CFSDI, SUBMSK_CFSDI); -} - -static struct irq_chip s3c2412_irq_cfsdi = { - .name = "s3c2412-cfsdi", - .irq_ack = s3c2412_irq_cfsdi_ack, - .irq_mask = s3c2412_irq_cfsdi_mask, - .irq_unmask = s3c2412_irq_cfsdi_unmask, -}; - -static int s3c2412_irq_rtc_wake(struct irq_data *data, unsigned int state) -{ - unsigned long pwrcfg; - - pwrcfg = __raw_readl(S3C2412_PWRCFG); - if (state) - pwrcfg &= ~S3C2412_PWRCFG_RTC_MASKIRQ; - else - pwrcfg |= S3C2412_PWRCFG_RTC_MASKIRQ; - __raw_writel(pwrcfg, S3C2412_PWRCFG); - - return s3c_irq_chip.irq_set_wake(data, state); -} - -static struct irq_chip s3c2412_irq_rtc_chip; - -static int s3c2412_irq_add(struct device *dev, struct subsys_interface *sif) -{ - unsigned int irqno; - - for (irqno = IRQ_EINT0; irqno <= IRQ_EINT3; irqno++) { - irq_set_chip_and_handler(irqno, &s3c2412_irq_eint0t4, - handle_edge_irq); - set_irq_flags(irqno, IRQF_VALID); - } - - /* add demux support for CF/SDI */ - - irq_set_chained_handler(IRQ_S3C2412_CFSDI, s3c2412_irq_demux_cfsdi); - - for (irqno = IRQ_S3C2412_SDI; irqno <= IRQ_S3C2412_CF; irqno++) { - irq_set_chip_and_handler(irqno, &s3c2412_irq_cfsdi, - handle_level_irq); - set_irq_flags(irqno, IRQF_VALID); - } - - /* change RTC IRQ's set wake method */ - - s3c2412_irq_rtc_chip = s3c_irq_chip; - s3c2412_irq_rtc_chip.irq_set_wake = s3c2412_irq_rtc_wake; - - irq_set_chip(IRQ_RTC, &s3c2412_irq_rtc_chip); - - return 0; -} - -static struct subsys_interface s3c2412_irq_interface = { - .name = "s3c2412_irq", - .subsys = &s3c2412_subsys, - .add_dev = s3c2412_irq_add, -}; - -static int s3c2412_irq_init(void) -{ - return subsys_interface_register(&s3c2412_irq_interface); -} - -arch_initcall(s3c2412_irq_init); diff --git a/arch/arm/mach-s3c24xx/irq-s3c2440.c b/arch/arm/mach-s3c24xx/irq-s3c2440.c deleted file mode 100644 index 4a18cde439cc..000000000000 --- a/arch/arm/mach-s3c24xx/irq-s3c2440.c +++ /dev/null @@ -1,128 +0,0 @@ -/* linux/arch/arm/mach-s3c2440/irq.c - * - * Copyright (c) 2003-2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/device.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <asm/irq.h> - -#include <asm/mach/irq.h> - -#include <mach/regs-irq.h> -#include <mach/regs-gpio.h> - -#include <plat/cpu.h> -#include <plat/pm.h> -#include <plat/irq.h> - -/* WDT/AC97 */ - -static void s3c_irq_demux_wdtac97(unsigned int irq, - struct irq_desc *desc) -{ - unsigned int subsrc, submsk; - - /* read the current pending interrupts, and the mask - * for what it is available */ - - subsrc = __raw_readl(S3C2410_SUBSRCPND); - submsk = __raw_readl(S3C2410_INTSUBMSK); - - subsrc &= ~submsk; - subsrc >>= 13; - subsrc &= 3; - - if (subsrc != 0) { - if (subsrc & 1) { - generic_handle_irq(IRQ_S3C2440_WDT); - } - if (subsrc & 2) { - generic_handle_irq(IRQ_S3C2440_AC97); - } - } -} - - -#define INTMSK_WDT (1UL << (IRQ_WDT - IRQ_EINT0)) - -static void -s3c_irq_wdtac97_mask(struct irq_data *data) -{ - s3c_irqsub_mask(data->irq, INTMSK_WDT, 3 << 13); -} - -static void -s3c_irq_wdtac97_unmask(struct irq_data *data) -{ - s3c_irqsub_unmask(data->irq, INTMSK_WDT); -} - -static void -s3c_irq_wdtac97_ack(struct irq_data *data) -{ - s3c_irqsub_maskack(data->irq, INTMSK_WDT, 3 << 13); -} - -static struct irq_chip s3c_irq_wdtac97 = { - .irq_mask = s3c_irq_wdtac97_mask, - .irq_unmask = s3c_irq_wdtac97_unmask, - .irq_ack = s3c_irq_wdtac97_ack, -}; - -static int s3c2440_irq_add(struct device *dev, struct subsys_interface *sif) -{ - unsigned int irqno; - - printk("S3C2440: IRQ Support\n"); - - /* add new chained handler for wdt, ac7 */ - - irq_set_chip_and_handler(IRQ_WDT, &s3c_irq_level_chip, - handle_level_irq); - irq_set_chained_handler(IRQ_WDT, s3c_irq_demux_wdtac97); - - for (irqno = IRQ_S3C2440_WDT; irqno <= IRQ_S3C2440_AC97; irqno++) { - irq_set_chip_and_handler(irqno, &s3c_irq_wdtac97, - handle_level_irq); - set_irq_flags(irqno, IRQF_VALID); - } - - return 0; -} - -static struct subsys_interface s3c2440_irq_interface = { - .name = "s3c2440_irq", - .subsys = &s3c2440_subsys, - .add_dev = s3c2440_irq_add, -}; - -static int s3c2440_irq_init(void) -{ - return subsys_interface_register(&s3c2440_irq_interface); -} - -arch_initcall(s3c2440_irq_init); - diff --git a/arch/arm/mach-s3c24xx/irq-s3c244x.c b/arch/arm/mach-s3c24xx/irq-s3c244x.c deleted file mode 100644 index 5fe8e58d3afd..000000000000 --- a/arch/arm/mach-s3c24xx/irq-s3c244x.c +++ /dev/null @@ -1,142 +0,0 @@ -/* linux/arch/arm/plat-s3c24xx/s3c244x-irq.c - * - * Copyright (c) 2003-2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/device.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <asm/irq.h> - -#include <asm/mach/irq.h> - -#include <mach/regs-irq.h> -#include <mach/regs-gpio.h> - -#include <plat/cpu.h> -#include <plat/pm.h> -#include <plat/irq.h> - -/* camera irq */ - -static void s3c_irq_demux_cam(unsigned int irq, - struct irq_desc *desc) -{ - unsigned int subsrc, submsk; - - /* read the current pending interrupts, and the mask - * for what it is available */ - - subsrc = __raw_readl(S3C2410_SUBSRCPND); - submsk = __raw_readl(S3C2410_INTSUBMSK); - - subsrc &= ~submsk; - subsrc >>= 11; - subsrc &= 3; - - if (subsrc != 0) { - if (subsrc & 1) { - generic_handle_irq(IRQ_S3C2440_CAM_C); - } - if (subsrc & 2) { - generic_handle_irq(IRQ_S3C2440_CAM_P); - } - } -} - -#define INTMSK_CAM (1UL << (IRQ_CAM - IRQ_EINT0)) - -static void -s3c_irq_cam_mask(struct irq_data *data) -{ - s3c_irqsub_mask(data->irq, INTMSK_CAM, 3 << 11); -} - -static void -s3c_irq_cam_unmask(struct irq_data *data) -{ - s3c_irqsub_unmask(data->irq, INTMSK_CAM); -} - -static void -s3c_irq_cam_ack(struct irq_data *data) -{ - s3c_irqsub_maskack(data->irq, INTMSK_CAM, 3 << 11); -} - -static struct irq_chip s3c_irq_cam = { - .irq_mask = s3c_irq_cam_mask, - .irq_unmask = s3c_irq_cam_unmask, - .irq_ack = s3c_irq_cam_ack, -}; - -static int s3c244x_irq_add(struct device *dev, struct subsys_interface *sif) -{ - unsigned int irqno; - - irq_set_chip_and_handler(IRQ_NFCON, &s3c_irq_level_chip, - handle_level_irq); - set_irq_flags(IRQ_NFCON, IRQF_VALID); - - /* add chained handler for camera */ - - irq_set_chip_and_handler(IRQ_CAM, &s3c_irq_level_chip, - handle_level_irq); - irq_set_chained_handler(IRQ_CAM, s3c_irq_demux_cam); - - for (irqno = IRQ_S3C2440_CAM_C; irqno <= IRQ_S3C2440_CAM_P; irqno++) { - irq_set_chip_and_handler(irqno, &s3c_irq_cam, - handle_level_irq); - set_irq_flags(irqno, IRQF_VALID); - } - - return 0; -} - -static struct subsys_interface s3c2440_irq_interface = { - .name = "s3c2440_irq", - .subsys = &s3c2440_subsys, - .add_dev = s3c244x_irq_add, -}; - -static int s3c2440_irq_init(void) -{ - return subsys_interface_register(&s3c2440_irq_interface); -} - -arch_initcall(s3c2440_irq_init); - -static struct subsys_interface s3c2442_irq_interface = { - .name = "s3c2442_irq", - .subsys = &s3c2442_subsys, - .add_dev = s3c244x_irq_add, -}; - - -static int s3c2442_irq_init(void) -{ - return subsys_interface_register(&s3c2442_irq_interface); -} - -arch_initcall(s3c2442_irq_init); diff --git a/arch/arm/mach-s3c24xx/irq.c b/arch/arm/mach-s3c24xx/irq.c deleted file mode 100644 index d8ba9bee4c7e..000000000000 --- a/arch/arm/mach-s3c24xx/irq.c +++ /dev/null @@ -1,822 +0,0 @@ -/* - * S3C24XX IRQ handling - * - * Copyright (c) 2003-2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * Copyright (c) 2012 Heiko Stuebner <heiko@sntech.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. -*/ - -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/module.h> -#include <linux/io.h> -#include <linux/err.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/device.h> -#include <linux/irqdomain.h> - -#include <asm/mach/irq.h> - -#include <mach/regs-irq.h> -#include <mach/regs-gpio.h> - -#include <plat/cpu.h> -#include <plat/regs-irqtype.h> -#include <plat/pm.h> -#include <plat/irq.h> - -#define S3C_IRQTYPE_NONE 0 -#define S3C_IRQTYPE_EINT 1 -#define S3C_IRQTYPE_EDGE 2 -#define S3C_IRQTYPE_LEVEL 3 - -struct s3c_irq_data { - unsigned int type; - unsigned long parent_irq; - - /* data gets filled during init */ - struct s3c_irq_intc *intc; - unsigned long sub_bits; - struct s3c_irq_intc *sub_intc; -}; - -/* - * Sructure holding the controller data - * @reg_pending register holding pending irqs - * @reg_intpnd special register intpnd in main intc - * @reg_mask mask register - * @domain irq_domain of the controller - * @parent parent controller for ext and sub irqs - * @irqs irq-data, always s3c_irq_data[32] - */ -struct s3c_irq_intc { - void __iomem *reg_pending; - void __iomem *reg_intpnd; - void __iomem *reg_mask; - struct irq_domain *domain; - struct s3c_irq_intc *parent; - struct s3c_irq_data *irqs; -}; - -static void s3c_irq_mask(struct irq_data *data) -{ - struct s3c_irq_intc *intc = data->domain->host_data; - struct s3c_irq_intc *parent_intc = intc->parent; - struct s3c_irq_data *irq_data = &intc->irqs[data->hwirq]; - struct s3c_irq_data *parent_data; - unsigned long mask; - unsigned int irqno; - - mask = __raw_readl(intc->reg_mask); - mask |= (1UL << data->hwirq); - __raw_writel(mask, intc->reg_mask); - - if (parent_intc && irq_data->parent_irq) { - parent_data = &parent_intc->irqs[irq_data->parent_irq]; - - /* check to see if we need to mask the parent IRQ */ - if ((mask & parent_data->sub_bits) == parent_data->sub_bits) { - irqno = irq_find_mapping(parent_intc->domain, - irq_data->parent_irq); - s3c_irq_mask(irq_get_irq_data(irqno)); - } - } -} - -static void s3c_irq_unmask(struct irq_data *data) -{ - struct s3c_irq_intc *intc = data->domain->host_data; - struct s3c_irq_intc *parent_intc = intc->parent; - struct s3c_irq_data *irq_data = &intc->irqs[data->hwirq]; - unsigned long mask; - unsigned int irqno; - - mask = __raw_readl(intc->reg_mask); - mask &= ~(1UL << data->hwirq); - __raw_writel(mask, intc->reg_mask); - - if (parent_intc && irq_data->parent_irq) { - irqno = irq_find_mapping(parent_intc->domain, - irq_data->parent_irq); - s3c_irq_unmask(irq_get_irq_data(irqno)); - } -} - -static inline void s3c_irq_ack(struct irq_data *data) -{ - struct s3c_irq_intc *intc = data->domain->host_data; - unsigned long bitval = 1UL << data->hwirq; - - __raw_writel(bitval, intc->reg_pending); - if (intc->reg_intpnd) - __raw_writel(bitval, intc->reg_intpnd); -} - -static int s3c_irqext_type_set(void __iomem *gpcon_reg, - void __iomem *extint_reg, - unsigned long gpcon_offset, - unsigned long extint_offset, - unsigned int type) -{ - unsigned long newvalue = 0, value; - - /* Set the GPIO to external interrupt mode */ - value = __raw_readl(gpcon_reg); - value = (value & ~(3 << gpcon_offset)) | (0x02 << gpcon_offset); - __raw_writel(value, gpcon_reg); - - /* Set the external interrupt to pointed trigger type */ - switch (type) - { - case IRQ_TYPE_NONE: - pr_warn("No edge setting!\n"); - break; - - case IRQ_TYPE_EDGE_RISING: - newvalue = S3C2410_EXTINT_RISEEDGE; - break; - - case IRQ_TYPE_EDGE_FALLING: - newvalue = S3C2410_EXTINT_FALLEDGE; - break; - - case IRQ_TYPE_EDGE_BOTH: - newvalue = S3C2410_EXTINT_BOTHEDGE; - break; - - case IRQ_TYPE_LEVEL_LOW: - newvalue = S3C2410_EXTINT_LOWLEV; - break; - - case IRQ_TYPE_LEVEL_HIGH: - newvalue = S3C2410_EXTINT_HILEV; - break; - - default: - pr_err("No such irq type %d", type); - return -EINVAL; - } - - value = __raw_readl(extint_reg); - value = (value & ~(7 << extint_offset)) | (newvalue << extint_offset); - __raw_writel(value, extint_reg); - - return 0; -} - -/* FIXME: make static when it's out of plat-samsung/irq.h */ -int s3c_irqext_type(struct irq_data *data, unsigned int type) -{ - void __iomem *extint_reg; - void __iomem *gpcon_reg; - unsigned long gpcon_offset, extint_offset; - - if ((data->hwirq >= 4) && (data->hwirq <= 7)) { - gpcon_reg = S3C2410_GPFCON; - extint_reg = S3C24XX_EXTINT0; - gpcon_offset = (data->hwirq) * 2; - extint_offset = (data->hwirq) * 4; - } else if ((data->hwirq >= 8) && (data->hwirq <= 15)) { - gpcon_reg = S3C2410_GPGCON; - extint_reg = S3C24XX_EXTINT1; - gpcon_offset = (data->hwirq - 8) * 2; - extint_offset = (data->hwirq - 8) * 4; - } else if ((data->hwirq >= 16) && (data->hwirq <= 23)) { - gpcon_reg = S3C2410_GPGCON; - extint_reg = S3C24XX_EXTINT2; - gpcon_offset = (data->hwirq - 8) * 2; - extint_offset = (data->hwirq - 16) * 4; - } else { - return -EINVAL; - } - - return s3c_irqext_type_set(gpcon_reg, extint_reg, gpcon_offset, - extint_offset, type); -} - -static int s3c_irqext0_type(struct irq_data *data, unsigned int type) -{ - void __iomem *extint_reg; - void __iomem *gpcon_reg; - unsigned long gpcon_offset, extint_offset; - - if ((data->hwirq >= 0) && (data->hwirq <= 3)) { - gpcon_reg = S3C2410_GPFCON; - extint_reg = S3C24XX_EXTINT0; - gpcon_offset = (data->hwirq) * 2; - extint_offset = (data->hwirq) * 4; - } else { - return -EINVAL; - } - - return s3c_irqext_type_set(gpcon_reg, extint_reg, gpcon_offset, - extint_offset, type); -} - -struct irq_chip s3c_irq_chip = { - .name = "s3c", - .irq_ack = s3c_irq_ack, - .irq_mask = s3c_irq_mask, - .irq_unmask = s3c_irq_unmask, - .irq_set_wake = s3c_irq_wake -}; - -struct irq_chip s3c_irq_level_chip = { - .name = "s3c-level", - .irq_mask = s3c_irq_mask, - .irq_unmask = s3c_irq_unmask, - .irq_ack = s3c_irq_ack, -}; - -static struct irq_chip s3c_irqext_chip = { - .name = "s3c-ext", - .irq_mask = s3c_irq_mask, - .irq_unmask = s3c_irq_unmask, - .irq_ack = s3c_irq_ack, - .irq_set_type = s3c_irqext_type, - .irq_set_wake = s3c_irqext_wake -}; - -static struct irq_chip s3c_irq_eint0t4 = { - .name = "s3c-ext0", - .irq_ack = s3c_irq_ack, - .irq_mask = s3c_irq_mask, - .irq_unmask = s3c_irq_unmask, - .irq_set_wake = s3c_irq_wake, - .irq_set_type = s3c_irqext0_type, -}; - -static void s3c_irq_demux(unsigned int irq, struct irq_desc *desc) -{ - struct irq_chip *chip = irq_desc_get_chip(desc); - struct s3c_irq_intc *intc = desc->irq_data.domain->host_data; - struct s3c_irq_data *irq_data = &intc->irqs[desc->irq_data.hwirq]; - struct s3c_irq_intc *sub_intc = irq_data->sub_intc; - unsigned long src; - unsigned long msk; - unsigned int n; - - chained_irq_enter(chip, desc); - - src = __raw_readl(sub_intc->reg_pending); - msk = __raw_readl(sub_intc->reg_mask); - - src &= ~msk; - src &= irq_data->sub_bits; - - while (src) { - n = __ffs(src); - src &= ~(1 << n); - generic_handle_irq(irq_find_mapping(sub_intc->domain, n)); - } - - chained_irq_exit(chip, desc); -} - -#ifdef CONFIG_FIQ -/** - * s3c24xx_set_fiq - set the FIQ routing - * @irq: IRQ number to route to FIQ on processor. - * @on: Whether to route @irq to the FIQ, or to remove the FIQ routing. - * - * Change the state of the IRQ to FIQ routing depending on @irq and @on. If - * @on is true, the @irq is checked to see if it can be routed and the - * interrupt controller updated to route the IRQ. If @on is false, the FIQ - * routing is cleared, regardless of which @irq is specified. - */ -int s3c24xx_set_fiq(unsigned int irq, bool on) -{ - u32 intmod; - unsigned offs; - - if (on) { - offs = irq - FIQ_START; - if (offs > 31) - return -EINVAL; - - intmod = 1 << offs; - } else { - intmod = 0; - } - - __raw_writel(intmod, S3C2410_INTMOD); - return 0; -} - -EXPORT_SYMBOL_GPL(s3c24xx_set_fiq); -#endif - -static int s3c24xx_irq_map(struct irq_domain *h, unsigned int virq, - irq_hw_number_t hw) -{ - struct s3c_irq_intc *intc = h->host_data; - struct s3c_irq_data *irq_data = &intc->irqs[hw]; - struct s3c_irq_intc *parent_intc; - struct s3c_irq_data *parent_irq_data; - unsigned int irqno; - - if (!intc) { - pr_err("irq-s3c24xx: no controller found for hwirq %lu\n", hw); - return -EINVAL; - } - - if (!irq_data) { - pr_err("irq-s3c24xx: no irq data found for hwirq %lu\n", hw); - return -EINVAL; - } - - /* attach controller pointer to irq_data */ - irq_data->intc = intc; - - /* set handler and flags */ - switch (irq_data->type) { - case S3C_IRQTYPE_NONE: - return 0; - case S3C_IRQTYPE_EINT: - if (irq_data->parent_irq) - irq_set_chip_and_handler(virq, &s3c_irqext_chip, - handle_edge_irq); - else - irq_set_chip_and_handler(virq, &s3c_irq_eint0t4, - handle_edge_irq); - break; - case S3C_IRQTYPE_EDGE: - if (irq_data->parent_irq || - intc->reg_pending == S3C2416_SRCPND2) - irq_set_chip_and_handler(virq, &s3c_irq_level_chip, - handle_edge_irq); - else - irq_set_chip_and_handler(virq, &s3c_irq_chip, - handle_edge_irq); - break; - case S3C_IRQTYPE_LEVEL: - if (irq_data->parent_irq) - irq_set_chip_and_handler(virq, &s3c_irq_level_chip, - handle_level_irq); - else - irq_set_chip_and_handler(virq, &s3c_irq_chip, - handle_level_irq); - break; - default: - pr_err("irq-s3c24xx: unsupported irqtype %d\n", irq_data->type); - return -EINVAL; - } - set_irq_flags(virq, IRQF_VALID); - - if (irq_data->parent_irq) { - parent_intc = intc->parent; - if (!parent_intc) { - pr_err("irq-s3c24xx: no parent controller found for hwirq %lu\n", - hw); - goto err; - } - - parent_irq_data = &parent_intc->irqs[irq_data->parent_irq]; - if (!irq_data) { - pr_err("irq-s3c24xx: no irq data found for hwirq %lu\n", - hw); - goto err; - } - - parent_irq_data->sub_intc = intc; - parent_irq_data->sub_bits |= (1UL << hw); - - /* attach the demuxer to the parent irq */ - irqno = irq_find_mapping(parent_intc->domain, - irq_data->parent_irq); - if (!irqno) { - pr_err("irq-s3c24xx: could not find mapping for parent irq %lu\n", - irq_data->parent_irq); - goto err; - } - irq_set_chained_handler(irqno, s3c_irq_demux); - } - - return 0; - -err: - set_irq_flags(virq, 0); - - /* the only error can result from bad mapping data*/ - return -EINVAL; -} - -static struct irq_domain_ops s3c24xx_irq_ops = { - .map = s3c24xx_irq_map, - .xlate = irq_domain_xlate_twocell, -}; - -static void s3c24xx_clear_intc(struct s3c_irq_intc *intc) -{ - void __iomem *reg_source; - unsigned long pend; - unsigned long last; - int i; - - /* if intpnd is set, read the next pending irq from there */ - reg_source = intc->reg_intpnd ? intc->reg_intpnd : intc->reg_pending; - - last = 0; - for (i = 0; i < 4; i++) { - pend = __raw_readl(reg_source); - - if (pend == 0 || pend == last) - break; - - __raw_writel(pend, intc->reg_pending); - if (intc->reg_intpnd) - __raw_writel(pend, intc->reg_intpnd); - - pr_info("irq: clearing pending status %08x\n", (int)pend); - last = pend; - } -} - -struct s3c_irq_intc *s3c24xx_init_intc(struct device_node *np, - struct s3c_irq_data *irq_data, - struct s3c_irq_intc *parent, - unsigned long address) -{ - struct s3c_irq_intc *intc; - void __iomem *base = (void *)0xf6000000; /* static mapping */ - int irq_num; - int irq_start; - int irq_offset; - int ret; - - intc = kzalloc(sizeof(struct s3c_irq_intc), GFP_KERNEL); - if (!intc) - return ERR_PTR(-ENOMEM); - - intc->irqs = irq_data; - - if (parent) - intc->parent = parent; - - /* select the correct data for the controller. - * Need to hard code the irq num start and offset - * to preserve the static mapping for now - */ - switch (address) { - case 0x4a000000: - pr_debug("irq: found main intc\n"); - intc->reg_pending = base; - intc->reg_mask = base + 0x08; - intc->reg_intpnd = base + 0x10; - irq_num = 32; - irq_start = S3C2410_IRQ(0); - irq_offset = 0; - break; - case 0x4a000018: - pr_debug("irq: found subintc\n"); - intc->reg_pending = base + 0x18; - intc->reg_mask = base + 0x1c; - irq_num = 29; - irq_start = S3C2410_IRQSUB(0); - irq_offset = 0; - break; - case 0x4a000040: - pr_debug("irq: found intc2\n"); - intc->reg_pending = base + 0x40; - intc->reg_mask = base + 0x48; - intc->reg_intpnd = base + 0x50; - irq_num = 8; - irq_start = S3C2416_IRQ(0); - irq_offset = 0; - break; - case 0x560000a4: - pr_debug("irq: found eintc\n"); - base = (void *)0xfd000000; - - intc->reg_mask = base + 0xa4; - intc->reg_pending = base + 0xa8; - irq_num = 20; - irq_start = S3C2410_IRQ(32); - irq_offset = 4; - break; - default: - pr_err("irq: unsupported controller address\n"); - ret = -EINVAL; - goto err; - } - - /* now that all the data is complete, init the irq-domain */ - s3c24xx_clear_intc(intc); - intc->domain = irq_domain_add_legacy(np, irq_num, irq_start, - irq_offset, &s3c24xx_irq_ops, - intc); - if (!intc->domain) { - pr_err("irq: could not create irq-domain\n"); - ret = -EINVAL; - goto err; - } - - return intc; - -err: - kfree(intc); - return ERR_PTR(ret); -} - -/* s3c24xx_init_irq - * - * Initialise S3C2410 IRQ system -*/ - -static struct s3c_irq_data init_base[32] = { - { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */ - { .type = S3C_IRQTYPE_NONE, }, /* reserved */ - { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */ - { .type = S3C_IRQTYPE_EDGE, }, /* TICK */ - { .type = S3C_IRQTYPE_EDGE, }, /* WDT */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */ - { .type = S3C_IRQTYPE_EDGE, }, /* LCD */ - { .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */ - { .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */ - { .type = S3C_IRQTYPE_EDGE, }, /* SDI */ - { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */ - { .type = S3C_IRQTYPE_NONE, }, /* reserved */ - { .type = S3C_IRQTYPE_EDGE, }, /* USBD */ - { .type = S3C_IRQTYPE_EDGE, }, /* USBH */ - { .type = S3C_IRQTYPE_EDGE, }, /* IIC */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* RTC */ - { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */ -}; - -static struct s3c_irq_data init_eint[32] = { - { .type = S3C_IRQTYPE_NONE, }, /* reserved */ - { .type = S3C_IRQTYPE_NONE, }, /* reserved */ - { .type = S3C_IRQTYPE_NONE, }, /* reserved */ - { .type = S3C_IRQTYPE_NONE, }, /* reserved */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT4 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT5 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT6 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT7 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT8 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT9 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT10 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT11 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT12 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT13 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT14 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT15 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT16 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT17 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT18 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT19 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT20 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT21 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT22 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT23 */ -}; - -static struct s3c_irq_data init_subint[32] = { - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */ - { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */ - { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */ -}; - -void __init s3c24xx_init_irq(void) -{ - struct s3c_irq_intc *main_intc; - -#ifdef CONFIG_FIQ - init_FIQ(FIQ_START); -#endif - - main_intc = s3c24xx_init_intc(NULL, &init_base[0], NULL, 0x4a000000); - if (IS_ERR(main_intc)) { - pr_err("irq: could not create main interrupt controller\n"); - return; - } - - s3c24xx_init_intc(NULL, &init_subint[0], main_intc, 0x4a000018); - s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4); -} - -#ifdef CONFIG_CPU_S3C2416 -static struct s3c_irq_data init_s3c2416base[32] = { - { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */ - { .type = S3C_IRQTYPE_NONE, }, /* reserved */ - { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */ - { .type = S3C_IRQTYPE_EDGE, }, /* TICK */ - { .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* LCD */ - { .type = S3C_IRQTYPE_LEVEL, }, /* DMA */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART3 */ - { .type = S3C_IRQTYPE_NONE, }, /* reserved */ - { .type = S3C_IRQTYPE_EDGE, }, /* SDI1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* SDI0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* NAND */ - { .type = S3C_IRQTYPE_EDGE, }, /* USBD */ - { .type = S3C_IRQTYPE_EDGE, }, /* USBH */ - { .type = S3C_IRQTYPE_EDGE, }, /* IIC */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */ - { .type = S3C_IRQTYPE_NONE, }, - { .type = S3C_IRQTYPE_EDGE, }, /* RTC */ - { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */ -}; - -static struct s3c_irq_data init_s3c2416subint[32] = { - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */ - { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */ - { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */ - { .type = S3C_IRQTYPE_NONE }, /* reserved */ - { .type = S3C_IRQTYPE_NONE }, /* reserved */ - { .type = S3C_IRQTYPE_NONE }, /* reserved */ - { .type = S3C_IRQTYPE_NONE }, /* reserved */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD2 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD3 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD4 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA0 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA1 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA2 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA3 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA4 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA5 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */ -}; - -static struct s3c_irq_data init_s3c2416_second[32] = { - { .type = S3C_IRQTYPE_EDGE }, /* 2D */ - { .type = S3C_IRQTYPE_EDGE }, /* IIC1 */ - { .type = S3C_IRQTYPE_NONE }, /* reserved */ - { .type = S3C_IRQTYPE_NONE }, /* reserved */ - { .type = S3C_IRQTYPE_EDGE }, /* PCM0 */ - { .type = S3C_IRQTYPE_EDGE }, /* PCM1 */ - { .type = S3C_IRQTYPE_EDGE }, /* I2S0 */ - { .type = S3C_IRQTYPE_EDGE }, /* I2S1 */ -}; - -void __init s3c2416_init_irq(void) -{ - struct s3c_irq_intc *main_intc; - - pr_info("S3C2416: IRQ Support\n"); - -#ifdef CONFIG_FIQ - init_FIQ(FIQ_START); -#endif - - main_intc = s3c24xx_init_intc(NULL, &init_s3c2416base[0], NULL, 0x4a000000); - if (IS_ERR(main_intc)) { - pr_err("irq: could not create main interrupt controller\n"); - return; - } - - s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4); - s3c24xx_init_intc(NULL, &init_s3c2416subint[0], main_intc, 0x4a000018); - - s3c24xx_init_intc(NULL, &init_s3c2416_second[0], NULL, 0x4a000040); -} - -#endif - -#ifdef CONFIG_CPU_S3C2443 -static struct s3c_irq_data init_s3c2443base[32] = { - { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */ - { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* CAM */ - { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */ - { .type = S3C_IRQTYPE_EDGE, }, /* TICK */ - { .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */ - { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* LCD */ - { .type = S3C_IRQTYPE_LEVEL, }, /* DMA */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART3 */ - { .type = S3C_IRQTYPE_EDGE, }, /* CFON */ - { .type = S3C_IRQTYPE_EDGE, }, /* SDI1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* SDI0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* NAND */ - { .type = S3C_IRQTYPE_EDGE, }, /* USBD */ - { .type = S3C_IRQTYPE_EDGE, }, /* USBH */ - { .type = S3C_IRQTYPE_EDGE, }, /* IIC */ - { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */ - { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */ - { .type = S3C_IRQTYPE_EDGE, }, /* RTC */ - { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */ -}; - - -static struct s3c_irq_data init_s3c2443subint[32] = { - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */ - { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */ - { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_C */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_P */ - { .type = S3C_IRQTYPE_NONE }, /* reserved */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD1 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD2 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD3 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD4 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA0 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA1 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA2 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA3 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA4 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA5 */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-RX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-TX */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-ERR */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */ -}; - -void __init s3c2443_init_irq(void) -{ - struct s3c_irq_intc *main_intc; - - pr_info("S3C2443: IRQ Support\n"); - -#ifdef CONFIG_FIQ - init_FIQ(FIQ_START); -#endif - - main_intc = s3c24xx_init_intc(NULL, &init_s3c2443base[0], NULL, 0x4a000000); - if (IS_ERR(main_intc)) { - pr_err("irq: could not create main interrupt controller\n"); - return; - } - - s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4); - s3c24xx_init_intc(NULL, &init_s3c2443subint[0], main_intc, 0x4a000018); -} -#endif diff --git a/arch/arm/mach-s3c24xx/mach-amlm5900.c b/arch/arm/mach-s3c24xx/mach-amlm5900.c index 0e0279e79150..e27b5c91b3db 100644 --- a/arch/arm/mach-s3c24xx/mach-amlm5900.c +++ b/arch/arm/mach-s3c24xx/mach-amlm5900.c @@ -63,6 +63,8 @@ #include <linux/mtd/map.h> #include <linux/mtd/physmap.h> +#include <plat/samsung-time.h> + #include "common.h" static struct resource amlm5900_nor_resource = @@ -160,6 +162,7 @@ static void __init amlm5900_map_io(void) s3c24xx_init_io(amlm5900_iodesc, ARRAY_SIZE(amlm5900_iodesc)); s3c24xx_init_clocks(0); s3c24xx_init_uarts(amlm5900_uartcfgs, ARRAY_SIZE(amlm5900_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } #ifdef CONFIG_FB_S3C2410 @@ -235,8 +238,8 @@ static void __init amlm5900_init(void) MACHINE_START(AML_M5900, "AML_M5900") .atag_offset = 0x100, .map_io = amlm5900_map_io, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2410_init_irq, .init_machine = amlm5900_init, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-anubis.c b/arch/arm/mach-s3c24xx/mach-anubis.c index bb595f15ce36..c1fb6c37867f 100644 --- a/arch/arm/mach-s3c24xx/mach-anubis.c +++ b/arch/arm/mach-s3c24xx/mach-anubis.c @@ -49,6 +49,7 @@ #include <plat/devs.h> #include <plat/cpu.h> #include <linux/platform_data/asoc-s3c24xx_simtec.h> +#include <plat/samsung-time.h> #include "anubis.h" #include "common.h" @@ -410,6 +411,7 @@ static void __init anubis_map_io(void) s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc)); s3c24xx_init_clocks(0); s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); /* check for the newer revision boards with large page nand */ @@ -443,7 +445,7 @@ MACHINE_START(ANUBIS, "Simtec-Anubis") .atag_offset = 0x100, .map_io = anubis_map_io, .init_machine = anubis_init, - .init_irq = s3c24xx_init_irq, - .init_time = s3c24xx_timer_init, + .init_irq = s3c2440_init_irq, + .init_time = samsung_timer_init, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-at2440evb.c b/arch/arm/mach-s3c24xx/mach-at2440evb.c index b4bc60c78ebb..6dfeeb7ef469 100644 --- a/arch/arm/mach-s3c24xx/mach-at2440evb.c +++ b/arch/arm/mach-s3c24xx/mach-at2440evb.c @@ -48,6 +48,7 @@ #include <plat/devs.h> #include <plat/cpu.h> #include <linux/platform_data/mmc-s3cmci.h> +#include <plat/samsung-time.h> #include "common.h" @@ -192,6 +193,7 @@ static void __init at2440evb_map_io(void) s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc)); s3c24xx_init_clocks(16934400); s3c24xx_init_uarts(at2440evb_uartcfgs, ARRAY_SIZE(at2440evb_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init at2440evb_init(void) @@ -209,7 +211,7 @@ MACHINE_START(AT2440EVB, "AT2440EVB") .atag_offset = 0x100, .map_io = at2440evb_map_io, .init_machine = at2440evb_init, - .init_irq = s3c24xx_init_irq, - .init_time = s3c24xx_timer_init, + .init_irq = s3c2440_init_irq, + .init_time = samsung_timer_init, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-bast.c b/arch/arm/mach-s3c24xx/mach-bast.c index ca6618081041..22d6ae926d91 100644 --- a/arch/arm/mach-s3c24xx/mach-bast.c +++ b/arch/arm/mach-s3c24xx/mach-bast.c @@ -55,6 +55,7 @@ #include <plat/devs.h> #include <plat/gpio-cfg.h> #include <plat/regs-serial.h> +#include <plat/samsung-time.h> #include "bast.h" #include "common.h" @@ -576,6 +577,7 @@ static void __init bast_map_io(void) s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc)); s3c24xx_init_clocks(0); s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init bast_init(void) @@ -603,8 +605,8 @@ MACHINE_START(BAST, "Simtec-BAST") /* Maintainer: Ben Dooks <ben@simtec.co.uk> */ .atag_offset = 0x100, .map_io = bast_map_io, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2410_init_irq, .init_machine = bast_init, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c index a25e8c5a7b4c..13d8d073675a 100644 --- a/arch/arm/mach-s3c24xx/mach-gta02.c +++ b/arch/arm/mach-s3c24xx/mach-gta02.c @@ -81,6 +81,7 @@ #include <plat/gpio-cfg.h> #include <plat/pm.h> #include <plat/regs-serial.h> +#include <plat/samsung-time.h> #include "common.h" #include "gta02.h" @@ -501,6 +502,7 @@ static void __init gta02_map_io(void) s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc)); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(gta02_uartcfgs, ARRAY_SIZE(gta02_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } @@ -587,8 +589,8 @@ MACHINE_START(NEO1973_GTA02, "GTA02") /* Maintainer: Nelson Castillo <arhuaco@freaks-unidos.net> */ .atag_offset = 0x100, .map_io = gta02_map_io, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2442_init_irq, .init_machine = gta02_machine_init, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c index 79bc0830d740..af4334d6b4d5 100644 --- a/arch/arm/mach-s3c24xx/mach-h1940.c +++ b/arch/arm/mach-s3c24xx/mach-h1940.c @@ -62,7 +62,7 @@ #include <plat/pll.h> #include <plat/pm.h> #include <plat/regs-serial.h> - +#include <plat/samsung-time.h> #include "common.h" #include "h1940.h" @@ -646,6 +646,7 @@ static void __init h1940_map_io(void) s3c24xx_init_io(h1940_iodesc, ARRAY_SIZE(h1940_iodesc)); s3c24xx_init_clocks(0); s3c24xx_init_uarts(h1940_uartcfgs, ARRAY_SIZE(h1940_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); /* setup PM */ @@ -666,11 +667,6 @@ static void __init h1940_reserve(void) memblock_reserve(0x30081000, 0x1000); } -static void __init h1940_init_irq(void) -{ - s3c24xx_init_irq(); -} - static void __init h1940_init(void) { u32 tmp; @@ -739,8 +735,8 @@ MACHINE_START(H1940, "IPAQ-H1940") .atag_offset = 0x100, .map_io = h1940_map_io, .reserve = h1940_reserve, - .init_irq = h1940_init_irq, + .init_irq = s3c2410_init_irq, .init_machine = h1940_init, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c index 54e83c1f780c..a45fcd8ccf79 100644 --- a/arch/arm/mach-s3c24xx/mach-jive.c +++ b/arch/arm/mach-s3c24xx/mach-jive.c @@ -46,14 +46,15 @@ #include <linux/mtd/nand_ecc.h> #include <linux/mtd/partitions.h> -#include <plat/s3c2412.h> #include <plat/gpio-cfg.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/pm.h> #include <linux/platform_data/usb-s3c2410_udc.h> +#include <plat/samsung-time.h> +#include "common.h" #include "s3c2412-power.h" static struct map_desc jive_iodesc[] __initdata = { @@ -506,6 +507,7 @@ static void __init jive_map_io(void) s3c24xx_init_io(jive_iodesc, ARRAY_SIZE(jive_iodesc)); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(jive_uartcfgs, ARRAY_SIZE(jive_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void jive_power_off(void) @@ -658,9 +660,9 @@ MACHINE_START(JIVE, "JIVE") /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ .atag_offset = 0x100, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2412_init_irq, .map_io = jive_map_io, .init_machine = jive_machine_init, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c2412_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c index 2865e5919f2c..a83db46320bc 100644 --- a/arch/arm/mach-s3c24xx/mach-mini2440.c +++ b/arch/arm/mach-s3c24xx/mach-mini2440.c @@ -56,6 +56,7 @@ #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> +#include <plat/samsung-time.h> #include <sound/s3c24xx_uda134x.h> @@ -525,6 +526,7 @@ static void __init mini2440_map_io(void) s3c24xx_init_io(mini2440_iodesc, ARRAY_SIZE(mini2440_iodesc)); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(mini2440_uartcfgs, ARRAY_SIZE(mini2440_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } /* @@ -686,7 +688,7 @@ MACHINE_START(MINI2440, "MINI2440") .atag_offset = 0x100, .map_io = mini2440_map_io, .init_machine = mini2440_init, - .init_irq = s3c24xx_init_irq, - .init_time = s3c24xx_timer_init, + .init_irq = s3c2440_init_irq, + .init_time = samsung_timer_init, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-n30.c b/arch/arm/mach-s3c24xx/mach-n30.c index d9d04b240295..2cb46c37c920 100644 --- a/arch/arm/mach-s3c24xx/mach-n30.c +++ b/arch/arm/mach-s3c24xx/mach-n30.c @@ -48,8 +48,8 @@ #include <plat/cpu.h> #include <plat/devs.h> #include <linux/platform_data/mmc-s3cmci.h> -#include <plat/s3c2410.h> #include <linux/platform_data/usb-s3c2410_udc.h> +#include <plat/samsung-time.h> #include "common.h" @@ -536,6 +536,7 @@ static void __init n30_map_io(void) n30_hwinit(); s3c24xx_init_clocks(0); s3c24xx_init_uarts(n30_uartcfgs, ARRAY_SIZE(n30_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } /* GPB3 is the line that controls the pull-up for the USB D+ line */ @@ -589,9 +590,9 @@ MACHINE_START(N30, "Acer-N30") Ben Dooks <ben-linux@fluff.org> */ .atag_offset = 0x100, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .init_machine = n30_init, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2410_init_irq, .map_io = n30_map_io, .restart = s3c2410_restart, MACHINE_END @@ -600,9 +601,9 @@ MACHINE_START(N35, "Acer-N35") /* Maintainer: Christer Weinigel <christer@weinigel.se> */ .atag_offset = 0x100, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .init_machine = n30_init, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2410_init_irq, .map_io = n30_map_io, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-nexcoder.c b/arch/arm/mach-s3c24xx/mach-nexcoder.c index a454e2461860..01f4354206f9 100644 --- a/arch/arm/mach-s3c24xx/mach-nexcoder.c +++ b/arch/arm/mach-s3c24xx/mach-nexcoder.c @@ -41,11 +41,10 @@ #include <linux/platform_data/i2c-s3c2410.h> #include <plat/gpio-cfg.h> -#include <plat/s3c2410.h> -#include <plat/s3c244x.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> +#include <plat/samsung-time.h> #include "common.h" @@ -137,6 +136,7 @@ static void __init nexcoder_map_io(void) s3c24xx_init_io(nexcoder_iodesc, ARRAY_SIZE(nexcoder_iodesc)); s3c24xx_init_clocks(0); s3c24xx_init_uarts(nexcoder_uartcfgs, ARRAY_SIZE(nexcoder_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); nexcoder_sensorboard_init(); } @@ -152,7 +152,7 @@ MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440") .atag_offset = 0x100, .map_io = nexcoder_map_io, .init_machine = nexcoder_init, - .init_irq = s3c24xx_init_irq, - .init_time = s3c24xx_timer_init, + .init_irq = s3c2440_init_irq, + .init_time = samsung_timer_init, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-osiris.c b/arch/arm/mach-s3c24xx/mach-osiris.c index ae2cbdf3e3ca..58d6fbe5bf1f 100644 --- a/arch/arm/mach-s3c24xx/mach-osiris.c +++ b/arch/arm/mach-s3c24xx/mach-osiris.c @@ -45,6 +45,7 @@ #include <plat/devs.h> #include <plat/gpio-cfg.h> #include <plat/regs-serial.h> +#include <plat/samsung-time.h> #include <mach/hardware.h> #include <mach/regs-gpio.h> @@ -384,6 +385,7 @@ static void __init osiris_map_io(void) s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc)); s3c24xx_init_clocks(0); s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); /* check for the newer revision boards with large page nand */ @@ -424,8 +426,8 @@ MACHINE_START(OSIRIS, "Simtec-OSIRIS") /* Maintainer: Ben Dooks <ben@simtec.co.uk> */ .atag_offset = 0x100, .map_io = osiris_map_io, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2440_init_irq, .init_machine = osiris_init, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-otom.c b/arch/arm/mach-s3c24xx/mach-otom.c index 40a47d6c6a85..7e16b0740ec1 100644 --- a/arch/arm/mach-s3c24xx/mach-otom.c +++ b/arch/arm/mach-s3c24xx/mach-otom.c @@ -33,7 +33,7 @@ #include <plat/cpu.h> #include <plat/devs.h> #include <plat/regs-serial.h> -#include <plat/s3c2410.h> +#include <plat/samsung-time.h> #include "common.h" #include "otom.h" @@ -102,6 +102,7 @@ static void __init otom11_map_io(void) s3c24xx_init_io(otom11_iodesc, ARRAY_SIZE(otom11_iodesc)); s3c24xx_init_clocks(0); s3c24xx_init_uarts(otom11_uartcfgs, ARRAY_SIZE(otom11_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init otom11_init(void) @@ -115,7 +116,7 @@ MACHINE_START(OTOM, "Nex Vision - Otom 1.1") .atag_offset = 0x100, .map_io = otom11_map_io, .init_machine = otom11_init, - .init_irq = s3c24xx_init_irq, - .init_time = s3c24xx_timer_init, + .init_irq = s3c2410_init_irq, + .init_time = samsung_timer_init, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c index 56175f0941b1..f8feaeadb55a 100644 --- a/arch/arm/mach-s3c24xx/mach-qt2410.c +++ b/arch/arm/mach-s3c24xx/mach-qt2410.c @@ -55,13 +55,14 @@ #include <linux/platform_data/usb-s3c2410_udc.h> #include <linux/platform_data/i2c-s3c2410.h> -#include <plat/common-smdk.h> #include <plat/gpio-cfg.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/pm.h> +#include <plat/samsung-time.h> #include "common.h" +#include "common-smdk.h" static struct map_desc qt2410_iodesc[] __initdata = { { 0xe0000000, __phys_to_pfn(S3C2410_CS3+0x01000000), SZ_1M, MT_DEVICE } @@ -304,6 +305,7 @@ static void __init qt2410_map_io(void) s3c24xx_init_io(qt2410_iodesc, ARRAY_SIZE(qt2410_iodesc)); s3c24xx_init_clocks(12*1000*1000); s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init qt2410_machine_init(void) @@ -341,8 +343,8 @@ static void __init qt2410_machine_init(void) MACHINE_START(QT2410, "QT2410") .atag_offset = 0x100, .map_io = qt2410_map_io, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2410_init_irq, .init_machine = qt2410_machine_init, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c index 1f9ba2ae5288..44ca018e1f96 100644 --- a/arch/arm/mach-s3c24xx/mach-rx1950.c +++ b/arch/arm/mach-s3c24xx/mach-rx1950.c @@ -56,8 +56,8 @@ #include <plat/cpu.h> #include <plat/devs.h> #include <plat/pm.h> -#include <plat/regs-iic.h> #include <plat/regs-serial.h> +#include <plat/samsung-time.h> #include "common.h" #include "h1940.h" @@ -741,6 +741,7 @@ static void __init rx1950_map_io(void) s3c24xx_init_io(rx1950_iodesc, ARRAY_SIZE(rx1950_iodesc)); s3c24xx_init_clocks(16934000); s3c24xx_init_uarts(rx1950_uartcfgs, ARRAY_SIZE(rx1950_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); /* setup PM */ @@ -811,8 +812,8 @@ MACHINE_START(RX1950, "HP iPAQ RX1950") .atag_offset = 0x100, .map_io = rx1950_map_io, .reserve = rx1950_reserve, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2442_init_irq, .init_machine = rx1950_init_machine, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-rx3715.c b/arch/arm/mach-s3c24xx/mach-rx3715.c index f20418a2fb1b..3bc6231d0a1f 100644 --- a/arch/arm/mach-s3c24xx/mach-rx3715.c +++ b/arch/arm/mach-s3c24xx/mach-rx3715.c @@ -49,6 +49,7 @@ #include <plat/devs.h> #include <plat/pm.h> #include <plat/regs-serial.h> +#include <plat/samsung-time.h> #include "common.h" #include "h1940.h" @@ -179,6 +180,7 @@ static void __init rx3715_map_io(void) s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc)); s3c24xx_init_clocks(16934000); s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } /* H1940 and RX3715 need to reserve this for suspend */ @@ -188,11 +190,6 @@ static void __init rx3715_reserve(void) memblock_reserve(0x30081000, 0x1000); } -static void __init rx3715_init_irq(void) -{ - s3c24xx_init_irq(); -} - static void __init rx3715_init_machine(void) { #ifdef CONFIG_PM_H1940 @@ -210,8 +207,8 @@ MACHINE_START(RX3715, "IPAQ-RX3715") .atag_offset = 0x100, .map_io = rx3715_map_io, .reserve = rx3715_reserve, - .init_irq = rx3715_init_irq, + .init_irq = s3c2440_init_irq, .init_machine = rx3715_init_machine, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-smdk2410.c b/arch/arm/mach-s3c24xx/mach-smdk2410.c index e184bfa9613a..a773789e4f38 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2410.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2410.c @@ -51,10 +51,10 @@ #include <plat/devs.h> #include <plat/cpu.h> - -#include <plat/common-smdk.h> +#include <plat/samsung-time.h> #include "common.h" +#include "common-smdk.h" static struct map_desc smdk2410_iodesc[] __initdata = { /* nothing here yet */ @@ -101,6 +101,7 @@ static void __init smdk2410_map_io(void) s3c24xx_init_io(smdk2410_iodesc, ARRAY_SIZE(smdk2410_iodesc)); s3c24xx_init_clocks(0); s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init smdk2410_init(void) @@ -115,8 +116,8 @@ MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switc /* Maintainer: Jonas Dietsche */ .atag_offset = 0x100, .map_io = smdk2410_map_io, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2410_init_irq, .init_machine = smdk2410_init, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-smdk2413.c b/arch/arm/mach-s3c24xx/mach-smdk2413.c index 86d7847c9d45..8146e920f10d 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2413.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2413.c @@ -41,13 +41,13 @@ #include <linux/platform_data/i2c-s3c2410.h> #include <mach/fb.h> -#include <plat/s3c2410.h> -#include <plat/s3c2412.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> +#include <plat/samsung-time.h> -#include <plat/common-smdk.h> +#include "common.h" +#include "common-smdk.h" static struct map_desc smdk2413_iodesc[] __initdata = { }; @@ -106,6 +106,7 @@ static void __init smdk2413_map_io(void) s3c24xx_init_io(smdk2413_iodesc, ARRAY_SIZE(smdk2413_iodesc)); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(smdk2413_uartcfgs, ARRAY_SIZE(smdk2413_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init smdk2413_machine_init(void) @@ -129,10 +130,10 @@ MACHINE_START(S3C2413, "S3C2413") .atag_offset = 0x100, .fixup = smdk2413_fixup, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2412_init_irq, .map_io = smdk2413_map_io, .init_machine = smdk2413_machine_init, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c2412_restart, MACHINE_END @@ -141,10 +142,10 @@ MACHINE_START(SMDK2412, "SMDK2412") .atag_offset = 0x100, .fixup = smdk2413_fixup, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2412_init_irq, .map_io = smdk2413_map_io, .init_machine = smdk2413_machine_init, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c2412_restart, MACHINE_END @@ -153,9 +154,9 @@ MACHINE_START(SMDK2413, "SMDK2413") .atag_offset = 0x100, .fixup = smdk2413_fixup, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2412_init_irq, .map_io = smdk2413_map_io, .init_machine = smdk2413_machine_init, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c2412_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-smdk2416.c b/arch/arm/mach-s3c24xx/mach-smdk2416.c index ebb2e61f3d07..cb46847c66b4 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2416.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2416.c @@ -42,7 +42,6 @@ #include <linux/platform_data/leds-s3c24xx.h> #include <linux/platform_data/i2c-s3c2410.h> -#include <plat/s3c2416.h> #include <plat/gpio-cfg.h> #include <plat/clock.h> #include <plat/devs.h> @@ -51,10 +50,12 @@ #include <plat/sdhci.h> #include <linux/platform_data/usb-s3c2410_udc.h> #include <linux/platform_data/s3c-hsudc.h> +#include <plat/samsung-time.h> #include <plat/fb.h> -#include <plat/common-smdk.h> +#include "common.h" +#include "common-smdk.h" static struct map_desc smdk2416_iodesc[] __initdata = { /* ISA IO Space map (memory space selected by A24) */ @@ -221,6 +222,7 @@ static void __init smdk2416_map_io(void) s3c24xx_init_io(smdk2416_iodesc, ARRAY_SIZE(smdk2416_iodesc)); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(smdk2416_uartcfgs, ARRAY_SIZE(smdk2416_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init smdk2416_machine_init(void) @@ -253,6 +255,6 @@ MACHINE_START(SMDK2416, "SMDK2416") .init_irq = s3c2416_init_irq, .map_io = smdk2416_map_io, .init_machine = smdk2416_machine_init, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c2416_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-smdk2440.c b/arch/arm/mach-s3c24xx/mach-smdk2440.c index 08cc38c8a4ae..de2e5d39a847 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2440.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2440.c @@ -38,15 +38,13 @@ #include <mach/fb.h> #include <linux/platform_data/i2c-s3c2410.h> -#include <plat/s3c2410.h> -#include <plat/s3c244x.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> - -#include <plat/common-smdk.h> +#include <plat/samsung-time.h> #include "common.h" +#include "common-smdk.h" static struct map_desc smdk2440_iodesc[] __initdata = { /* ISA IO Space map (memory space selected by A24) */ @@ -163,6 +161,7 @@ static void __init smdk2440_map_io(void) s3c24xx_init_io(smdk2440_iodesc, ARRAY_SIZE(smdk2440_iodesc)); s3c24xx_init_clocks(16934400); s3c24xx_init_uarts(smdk2440_uartcfgs, ARRAY_SIZE(smdk2440_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init smdk2440_machine_init(void) @@ -178,9 +177,9 @@ MACHINE_START(S3C2440, "SMDK2440") /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ .atag_offset = 0x100, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2440_init_irq, .map_io = smdk2440_map_io, .init_machine = smdk2440_machine_init, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-smdk2443.c b/arch/arm/mach-s3c24xx/mach-smdk2443.c index fc65d74d3c73..9435c3bef18a 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2443.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2443.c @@ -38,13 +38,13 @@ #include <mach/fb.h> #include <linux/platform_data/i2c-s3c2410.h> -#include <plat/s3c2410.h> -#include <plat/s3c2443.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> +#include <plat/samsung-time.h> -#include <plat/common-smdk.h> +#include "common.h" +#include "common-smdk.h" static struct map_desc smdk2443_iodesc[] __initdata = { /* ISA IO Space map (memory space selected by A24) */ @@ -122,6 +122,7 @@ static void __init smdk2443_map_io(void) s3c24xx_init_io(smdk2443_iodesc, ARRAY_SIZE(smdk2443_iodesc)); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(smdk2443_uartcfgs, ARRAY_SIZE(smdk2443_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init smdk2443_machine_init(void) @@ -143,6 +144,6 @@ MACHINE_START(SMDK2443, "SMDK2443") .init_irq = s3c2443_init_irq, .map_io = smdk2443_map_io, .init_machine = smdk2443_machine_init, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c2443_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-tct_hammer.c b/arch/arm/mach-s3c24xx/mach-tct_hammer.c index 24b3d79e7b2c..7fad8f055cab 100644 --- a/arch/arm/mach-s3c24xx/mach-tct_hammer.c +++ b/arch/arm/mach-s3c24xx/mach-tct_hammer.c @@ -53,6 +53,7 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/map.h> #include <linux/mtd/physmap.h> +#include <plat/samsung-time.h> #include "common.h" @@ -136,6 +137,7 @@ static void __init tct_hammer_map_io(void) s3c24xx_init_io(tct_hammer_iodesc, ARRAY_SIZE(tct_hammer_iodesc)); s3c24xx_init_clocks(0); s3c24xx_init_uarts(tct_hammer_uartcfgs, ARRAY_SIZE(tct_hammer_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init tct_hammer_init(void) @@ -147,8 +149,8 @@ static void __init tct_hammer_init(void) MACHINE_START(TCT_HAMMER, "TCT_HAMMER") .atag_offset = 0x100, .map_io = tct_hammer_map_io, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2410_init_irq, .init_machine = tct_hammer_init, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-vr1000.c b/arch/arm/mach-s3c24xx/mach-vr1000.c index ec42d1e4e465..42e7187fed60 100644 --- a/arch/arm/mach-s3c24xx/mach-vr1000.c +++ b/arch/arm/mach-s3c24xx/mach-vr1000.c @@ -45,6 +45,7 @@ #include <plat/cpu.h> #include <plat/devs.h> #include <plat/regs-serial.h> +#include <plat/samsung-time.h> #include "bast.h" #include "common.h" @@ -332,6 +333,7 @@ static void __init vr1000_map_io(void) s3c24xx_init_io(vr1000_iodesc, ARRAY_SIZE(vr1000_iodesc)); s3c24xx_init_clocks(0); s3c24xx_init_uarts(vr1000_uartcfgs, ARRAY_SIZE(vr1000_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init vr1000_init(void) @@ -353,7 +355,7 @@ MACHINE_START(VR1000, "Thorcom-VR1000") .atag_offset = 0x100, .map_io = vr1000_map_io, .init_machine = vr1000_init, - .init_irq = s3c24xx_init_irq, - .init_time = s3c24xx_timer_init, + .init_irq = s3c2410_init_irq, + .init_time = samsung_timer_init, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c index 3e2bfddc9df1..b66588428ec9 100644 --- a/arch/arm/mach-s3c24xx/mach-vstms.c +++ b/arch/arm/mach-s3c24xx/mach-vstms.c @@ -41,12 +41,12 @@ #include <linux/platform_data/i2c-s3c2410.h> #include <linux/platform_data/mtd-nand-s3c2410.h> -#include <plat/s3c2410.h> -#include <plat/s3c2412.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> +#include <plat/samsung-time.h> +#include "common.h" static struct map_desc vstms_iodesc[] __initdata = { }; @@ -143,6 +143,7 @@ static void __init vstms_map_io(void) s3c24xx_init_io(vstms_iodesc, ARRAY_SIZE(vstms_iodesc)); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(vstms_uartcfgs, ARRAY_SIZE(vstms_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init vstms_init(void) @@ -157,9 +158,9 @@ MACHINE_START(VSTMS, "VSTMS") .atag_offset = 0x100, .fixup = vstms_fixup, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2412_init_irq, .init_machine = vstms_init, .map_io = vstms_map_io, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c2412_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/pm-s3c2412.c b/arch/arm/mach-s3c24xx/pm-s3c2412.c index 668a78a8b195..d75f95e487ee 100644 --- a/arch/arm/mach-s3c24xx/pm-s3c2412.c +++ b/arch/arm/mach-s3c24xx/pm-s3c2412.c @@ -29,7 +29,7 @@ #include <plat/cpu.h> #include <plat/pm.h> -#include <plat/s3c2412.h> +#include <plat/wakeup-mask.h> #include "regs-dsc.h" #include "s3c2412-power.h" @@ -52,8 +52,15 @@ static int s3c2412_cpu_suspend(unsigned long arg) return 1; /* Aborting suspend */ } +/* mapping of interrupts to parts of the wakeup mask */ +static struct samsung_wakeup_mask wake_irqs[] = { + { .irq = IRQ_RTC, .bit = S3C2412_PWRCFG_RTC_MASKIRQ, }, +}; + static void s3c2412_pm_prepare(void) { + samsung_sync_wakemask(S3C2412_PWRCFG, + wake_irqs, ARRAY_SIZE(wake_irqs)); } static int s3c2412_pm_add(struct device *dev, struct subsys_interface *sif) diff --git a/arch/arm/mach-s3c24xx/regs-dsc.h b/arch/arm/mach-s3c24xx/regs-dsc.h index 98fd4a05587c..61b3d1387d76 100644 --- a/arch/arm/mach-s3c24xx/regs-dsc.h +++ b/arch/arm/mach-s3c24xx/regs-dsc.h @@ -1,5 +1,4 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-dsc.h - * +/* * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk> * http://www.simtec.co.uk/products/SWLINUX/ * @@ -12,209 +11,15 @@ #ifndef __ASM_ARCH_REGS_DSC_H -#define __ASM_ARCH_REGS_DSC_H "2440-dsc" +#define __ASM_ARCH_REGS_DSC_H __FILE__ -#if defined(CONFIG_CPU_S3C2412) +/* S3C2412 */ #define S3C2412_DSC0 S3C2410_GPIOREG(0xdc) #define S3C2412_DSC1 S3C2410_GPIOREG(0xe0) -#endif - -#if defined(CONFIG_CPU_S3C2416) -#define S3C2416_DSC0 S3C2410_GPIOREG(0xc0) -#define S3C2416_DSC1 S3C2410_GPIOREG(0xc4) -#define S3C2416_DSC2 S3C2410_GPIOREG(0xc8) -#define S3C2416_DSC3 S3C2410_GPIOREG(0x110) - -#define S3C2416_SELECT_DSC0 (0 << 30) -#define S3C2416_SELECT_DSC1 (1 << 30) -#define S3C2416_SELECT_DSC2 (2 << 30) -#define S3C2416_SELECT_DSC3 (3 << 30) - -#define S3C2416_DSC_GETSHIFT(x) (x & 30) - -#define S3C2416_DSC0_CF (S3C2416_SELECT_DSC0 | 28) -#define S3C2416_DSC0_CF_5mA (0 << 28) -#define S3C2416_DSC0_CF_10mA (1 << 28) -#define S3C2416_DSC0_CF_15mA (2 << 28) -#define S3C2416_DSC0_CF_21mA (3 << 28) -#define S3C2416_DSC0_CF_MASK (3 << 28) - -#define S3C2416_DSC0_nRBE (S3C2416_SELECT_DSC0 | 26) -#define S3C2416_DSC0_nRBE_5mA (0 << 26) -#define S3C2416_DSC0_nRBE_10mA (1 << 26) -#define S3C2416_DSC0_nRBE_15mA (2 << 26) -#define S3C2416_DSC0_nRBE_21mA (3 << 26) -#define S3C2416_DSC0_nRBE_MASK (3 << 26) - -#define S3C2416_DSC0_nROE (S3C2416_SELECT_DSC0 | 24) -#define S3C2416_DSC0_nROE_5mA (0 << 24) -#define S3C2416_DSC0_nROE_10mA (1 << 24) -#define S3C2416_DSC0_nROE_15mA (2 << 24) -#define S3C2416_DSC0_nROE_21mA (3 << 24) -#define S3C2416_DSC0_nROE_MASK (3 << 24) - -#endif - -#if defined(CONFIG_CPU_S3C244X) +/* S3C2440 */ #define S3C2440_DSC0 S3C2410_GPIOREG(0xc4) #define S3C2440_DSC1 S3C2410_GPIOREG(0xc8) -#define S3C2440_SELECT_DSC0 (0) -#define S3C2440_SELECT_DSC1 (1<<31) - -#define S3C2440_DSC_GETSHIFT(x) ((x) & 31) - -#define S3C2440_DSC0_DISABLE (1<<31) - -#define S3C2440_DSC0_ADDR (S3C2440_SELECT_DSC0 | 8) -#define S3C2440_DSC0_ADDR_12mA (0<<8) -#define S3C2440_DSC0_ADDR_10mA (1<<8) -#define S3C2440_DSC0_ADDR_8mA (2<<8) -#define S3C2440_DSC0_ADDR_6mA (3<<8) -#define S3C2440_DSC0_ADDR_MASK (3<<8) - -/* D24..D31 */ -#define S3C2440_DSC0_DATA3 (S3C2440_SELECT_DSC0 | 6) -#define S3C2440_DSC0_DATA3_12mA (0<<6) -#define S3C2440_DSC0_DATA3_10mA (1<<6) -#define S3C2440_DSC0_DATA3_8mA (2<<6) -#define S3C2440_DSC0_DATA3_6mA (3<<6) -#define S3C2440_DSC0_DATA3_MASK (3<<6) - -/* D16..D23 */ -#define S3C2440_DSC0_DATA2 (S3C2440_SELECT_DSC0 | 4) -#define S3C2440_DSC0_DATA2_12mA (0<<4) -#define S3C2440_DSC0_DATA2_10mA (1<<4) -#define S3C2440_DSC0_DATA2_8mA (2<<4) -#define S3C2440_DSC0_DATA2_6mA (3<<4) -#define S3C2440_DSC0_DATA2_MASK (3<<4) - -/* D8..D15 */ -#define S3C2440_DSC0_DATA1 (S3C2440_SELECT_DSC0 | 2) -#define S3C2440_DSC0_DATA1_12mA (0<<2) -#define S3C2440_DSC0_DATA1_10mA (1<<2) -#define S3C2440_DSC0_DATA1_8mA (2<<2) -#define S3C2440_DSC0_DATA1_6mA (3<<2) -#define S3C2440_DSC0_DATA1_MASK (3<<2) - -/* D0..D7 */ -#define S3C2440_DSC0_DATA0 (S3C2440_SELECT_DSC0 | 0) -#define S3C2440_DSC0_DATA0_12mA (0<<0) -#define S3C2440_DSC0_DATA0_10mA (1<<0) -#define S3C2440_DSC0_DATA0_8mA (2<<0) -#define S3C2440_DSC0_DATA0_6mA (3<<0) -#define S3C2440_DSC0_DATA0_MASK (3<<0) - -#define S3C2440_DSC1_SCK1 (S3C2440_SELECT_DSC1 | 28) -#define S3C2440_DSC1_SCK1_12mA (0<<28) -#define S3C2440_DSC1_SCK1_10mA (1<<28) -#define S3C2440_DSC1_SCK1_8mA (2<<28) -#define S3C2440_DSC1_SCK1_6mA (3<<28) -#define S3C2440_DSC1_SCK1_MASK (3<<28) - -#define S3C2440_DSC1_SCK0 (S3C2440_SELECT_DSC1 | 26) -#define S3C2440_DSC1_SCK0_12mA (0<<26) -#define S3C2440_DSC1_SCK0_10mA (1<<26) -#define S3C2440_DSC1_SCK0_8mA (2<<26) -#define S3C2440_DSC1_SCK0_6mA (3<<26) -#define S3C2440_DSC1_SCK0_MASK (3<<26) - -#define S3C2440_DSC1_SCKE (S3C2440_SELECT_DSC1 | 24) -#define S3C2440_DSC1_SCKE_10mA (0<<24) -#define S3C2440_DSC1_SCKE_8mA (1<<24) -#define S3C2440_DSC1_SCKE_6mA (2<<24) -#define S3C2440_DSC1_SCKE_4mA (3<<24) -#define S3C2440_DSC1_SCKE_MASK (3<<24) - -/* SDRAM nRAS/nCAS */ -#define S3C2440_DSC1_SDR (S3C2440_SELECT_DSC1 | 22) -#define S3C2440_DSC1_SDR_10mA (0<<22) -#define S3C2440_DSC1_SDR_8mA (1<<22) -#define S3C2440_DSC1_SDR_6mA (2<<22) -#define S3C2440_DSC1_SDR_4mA (3<<22) -#define S3C2440_DSC1_SDR_MASK (3<<22) - -/* NAND Flash Controller */ -#define S3C2440_DSC1_NFC (S3C2440_SELECT_DSC1 | 20) -#define S3C2440_DSC1_NFC_10mA (0<<20) -#define S3C2440_DSC1_NFC_8mA (1<<20) -#define S3C2440_DSC1_NFC_6mA (2<<20) -#define S3C2440_DSC1_NFC_4mA (3<<20) -#define S3C2440_DSC1_NFC_MASK (3<<20) - -/* nBE[0..3] */ -#define S3C2440_DSC1_nBE (S3C2440_SELECT_DSC1 | 18) -#define S3C2440_DSC1_nBE_10mA (0<<18) -#define S3C2440_DSC1_nBE_8mA (1<<18) -#define S3C2440_DSC1_nBE_6mA (2<<18) -#define S3C2440_DSC1_nBE_4mA (3<<18) -#define S3C2440_DSC1_nBE_MASK (3<<18) - -#define S3C2440_DSC1_WOE (S3C2440_SELECT_DSC1 | 16) -#define S3C2440_DSC1_WOE_10mA (0<<16) -#define S3C2440_DSC1_WOE_8mA (1<<16) -#define S3C2440_DSC1_WOE_6mA (2<<16) -#define S3C2440_DSC1_WOE_4mA (3<<16) -#define S3C2440_DSC1_WOE_MASK (3<<16) - -#define S3C2440_DSC1_CS7 (S3C2440_SELECT_DSC1 | 14) -#define S3C2440_DSC1_CS7_10mA (0<<14) -#define S3C2440_DSC1_CS7_8mA (1<<14) -#define S3C2440_DSC1_CS7_6mA (2<<14) -#define S3C2440_DSC1_CS7_4mA (3<<14) -#define S3C2440_DSC1_CS7_MASK (3<<14) - -#define S3C2440_DSC1_CS6 (S3C2440_SELECT_DSC1 | 12) -#define S3C2440_DSC1_CS6_10mA (0<<12) -#define S3C2440_DSC1_CS6_8mA (1<<12) -#define S3C2440_DSC1_CS6_6mA (2<<12) -#define S3C2440_DSC1_CS6_4mA (3<<12) -#define S3C2440_DSC1_CS6_MASK (3<<12) - -#define S3C2440_DSC1_CS5 (S3C2440_SELECT_DSC1 | 10) -#define S3C2440_DSC1_CS5_10mA (0<<10) -#define S3C2440_DSC1_CS5_8mA (1<<10) -#define S3C2440_DSC1_CS5_6mA (2<<10) -#define S3C2440_DSC1_CS5_4mA (3<<10) -#define S3C2440_DSC1_CS5_MASK (3<<10) - -#define S3C2440_DSC1_CS4 (S3C2440_SELECT_DSC1 | 8) -#define S3C2440_DSC1_CS4_10mA (0<<8) -#define S3C2440_DSC1_CS4_8mA (1<<8) -#define S3C2440_DSC1_CS4_6mA (2<<8) -#define S3C2440_DSC1_CS4_4mA (3<<8) -#define S3C2440_DSC1_CS4_MASK (3<<8) - -#define S3C2440_DSC1_CS3 (S3C2440_SELECT_DSC1 | 6) -#define S3C2440_DSC1_CS3_10mA (0<<6) -#define S3C2440_DSC1_CS3_8mA (1<<6) -#define S3C2440_DSC1_CS3_6mA (2<<6) -#define S3C2440_DSC1_CS3_4mA (3<<6) -#define S3C2440_DSC1_CS3_MASK (3<<6) - -#define S3C2440_DSC1_CS2 (S3C2440_SELECT_DSC1 | 4) -#define S3C2440_DSC1_CS2_10mA (0<<4) -#define S3C2440_DSC1_CS2_8mA (1<<4) -#define S3C2440_DSC1_CS2_6mA (2<<4) -#define S3C2440_DSC1_CS2_4mA (3<<4) -#define S3C2440_DSC1_CS2_MASK (3<<4) - -#define S3C2440_DSC1_CS1 (S3C2440_SELECT_DSC1 | 2) -#define S3C2440_DSC1_CS1_10mA (0<<2) -#define S3C2440_DSC1_CS1_8mA (1<<2) -#define S3C2440_DSC1_CS1_6mA (2<<2) -#define S3C2440_DSC1_CS1_4mA (3<<2) -#define S3C2440_DSC1_CS1_MASK (3<<2) - -#define S3C2440_DSC1_CS0 (S3C2440_SELECT_DSC1 | 0) -#define S3C2440_DSC1_CS0_10mA (0<<0) -#define S3C2440_DSC1_CS0_8mA (1<<0) -#define S3C2440_DSC1_CS0_6mA (2<<0) -#define S3C2440_DSC1_CS0_4mA (3<<0) -#define S3C2440_DSC1_CS0_MASK (3<<0) - -#endif /* CONFIG_CPU_S3C2440 */ - #endif /* __ASM_ARCH_REGS_DSC_H */ diff --git a/arch/arm/mach-s3c24xx/s3c2410.c b/arch/arm/mach-s3c24xx/s3c2410.c index 9ebef95da721..d850ea5adac2 100644 --- a/arch/arm/mach-s3c24xx/s3c2410.c +++ b/arch/arm/mach-s3c24xx/s3c2410.c @@ -37,7 +37,6 @@ #include <mach/regs-clock.h> #include <plat/regs-serial.h> -#include <plat/s3c2410.h> #include <plat/cpu.h> #include <plat/devs.h> #include <plat/clock.h> diff --git a/arch/arm/mach-s3c24xx/s3c2412.c b/arch/arm/mach-s3c24xx/s3c2412.c index 0d592159a5c3..0f864d4c97de 100644 --- a/arch/arm/mach-s3c24xx/s3c2412.c +++ b/arch/arm/mach-s3c24xx/s3c2412.c @@ -44,7 +44,6 @@ #include <plat/pm.h> #include <plat/regs-serial.h> #include <plat/regs-spi.h> -#include <plat/s3c2412.h> #include "common.h" #include "regs-dsc.h" diff --git a/arch/arm/mach-s3c24xx/s3c2416.c b/arch/arm/mach-s3c24xx/s3c2416.c index e30476db0295..b9c5d382dafb 100644 --- a/arch/arm/mach-s3c24xx/s3c2416.c +++ b/arch/arm/mach-s3c24xx/s3c2416.c @@ -50,7 +50,6 @@ #include <plat/gpio-core.h> #include <plat/gpio-cfg.h> #include <plat/gpio-cfg-helpers.h> -#include <plat/s3c2416.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/sdhci.h> diff --git a/arch/arm/mach-s3c24xx/s3c2440.c b/arch/arm/mach-s3c24xx/s3c2440.c index 559e394e8989..5f9d6569475d 100644 --- a/arch/arm/mach-s3c24xx/s3c2440.c +++ b/arch/arm/mach-s3c24xx/s3c2440.c @@ -33,7 +33,6 @@ #include <plat/devs.h> #include <plat/cpu.h> -#include <plat/s3c244x.h> #include <plat/pm.h> #include <plat/gpio-core.h> diff --git a/arch/arm/mach-s3c24xx/s3c2442.c b/arch/arm/mach-s3c24xx/s3c2442.c index f732826c2359..6819961f6b19 100644 --- a/arch/arm/mach-s3c24xx/s3c2442.c +++ b/arch/arm/mach-s3c24xx/s3c2442.c @@ -44,7 +44,6 @@ #include <plat/clock.h> #include <plat/cpu.h> -#include <plat/s3c244x.h> #include <plat/pm.h> #include <plat/gpio-core.h> diff --git a/arch/arm/mach-s3c24xx/s3c2443.c b/arch/arm/mach-s3c24xx/s3c2443.c index 165b6a6b3daa..8328cd65bf3d 100644 --- a/arch/arm/mach-s3c24xx/s3c2443.c +++ b/arch/arm/mach-s3c24xx/s3c2443.c @@ -36,7 +36,6 @@ #include <plat/gpio-core.h> #include <plat/gpio-cfg.h> #include <plat/gpio-cfg-helpers.h> -#include <plat/s3c2443.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/fb-core.h> diff --git a/arch/arm/mach-s3c24xx/s3c244x.c b/arch/arm/mach-s3c24xx/s3c244x.c index ad2671baa910..2a35edb67354 100644 --- a/arch/arm/mach-s3c24xx/s3c244x.c +++ b/arch/arm/mach-s3c24xx/s3c244x.c @@ -37,8 +37,6 @@ #include <plat/regs-serial.h> #include <mach/regs-gpio.h> -#include <plat/s3c2410.h> -#include <plat/s3c244x.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig index 131c86284711..20578536aec7 100644 --- a/arch/arm/mach-s3c64xx/Kconfig +++ b/arch/arm/mach-s3c64xx/Kconfig @@ -17,11 +17,13 @@ config PLAT_S3C64XX # Configuration options for the S3C6410 CPU config CPU_S3C6400 + select SAMSUNG_HRT bool help Enable S3C6400 CPU support config CPU_S3C6410 + select SAMSUNG_HRT bool help Enable S3C6410 CPU support @@ -198,10 +200,7 @@ endchoice config SMDK6410_WM1190_EV1 bool "Support Wolfson Microelectronics 1190-EV1 PMIC card" depends on MACH_SMDK6410 - select MFD_WM8350_CONFIG_MODE_0 - select MFD_WM8350_CONFIG_MODE_3 select MFD_WM8350_I2C - select MFD_WM8352_CONFIG_MODE_0 select REGULATOR select REGULATOR_WM8350 select SAMSUNG_GPIO_EXTRA64 diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile index f9ce1dc28ce4..31d0c9101272 100644 --- a/arch/arm/mach-s3c64xx/Makefile +++ b/arch/arm/mach-s3c64xx/Makefile @@ -32,7 +32,6 @@ obj-$(CONFIG_S3C64XX_DMA) += dma.o obj-y += dev-uart.o obj-y += dev-audio.o -obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o # Device setup diff --git a/arch/arm/mach-s3c64xx/cpuidle.c b/arch/arm/mach-s3c64xx/cpuidle.c index ead5fab0dbb5..3c8ab07c2012 100644 --- a/arch/arm/mach-s3c64xx/cpuidle.c +++ b/arch/arm/mach-s3c64xx/cpuidle.c @@ -40,12 +40,9 @@ static int s3c64xx_enter_idle(struct cpuidle_device *dev, return index; } -static DEFINE_PER_CPU(struct cpuidle_device, s3c64xx_cpuidle_device); - static struct cpuidle_driver s3c64xx_cpuidle_driver = { .name = "s3c64xx_cpuidle", .owner = THIS_MODULE, - .en_core_tk_irqen = 1, .states = { { .enter = s3c64xx_enter_idle, @@ -61,16 +58,6 @@ static struct cpuidle_driver s3c64xx_cpuidle_driver = { static int __init s3c64xx_init_cpuidle(void) { - int ret; - - cpuidle_register_driver(&s3c64xx_cpuidle_driver); - - ret = cpuidle_register_device(&s3c64xx_cpuidle_device); - if (ret) { - pr_err("Failed to register cpuidle device: %d\n", ret); - return ret; - } - - return 0; + return cpuidle_register(&s3c64xx_cpuidle_driver, NULL); } device_initcall(s3c64xx_init_cpuidle); diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c index 6af1aa1ef213..759846c28d12 100644 --- a/arch/arm/mach-s3c64xx/dma.c +++ b/arch/arm/mach-s3c64xx/dma.c @@ -509,6 +509,7 @@ int s3c2410_dma_request(enum dma_ch channel, chan->client = client; chan->in_use = 1; chan->peripheral = channel; + chan->flags = 0; local_irq_restore(flags); diff --git a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S index c0c076a90f27..dd9ccca5de1f 100644 --- a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S +++ b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S @@ -35,4 +35,4 @@ * will be fine with us. */ -#include <plat/debug-macro.S> +#include <debug/samsung.S> diff --git a/arch/arm/mach-s3c64xx/include/mach/dma.h b/arch/arm/mach-s3c64xx/include/mach/dma.h index 57b1ff4b2d7c..fe1a98cf0e4c 100644 --- a/arch/arm/mach-s3c64xx/include/mach/dma.h +++ b/arch/arm/mach-s3c64xx/include/mach/dma.h @@ -21,7 +21,6 @@ */ enum dma_ch { /* DMA0/SDMA0 */ - DMACH_DT_PROP = -1, /* not yet supported, do not use */ DMACH_UART0 = 0, DMACH_UART0_SRC2, DMACH_UART1, diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c index 728eef3296b2..35e3f54574ef 100644 --- a/arch/arm/mach-s3c64xx/mach-anw6410.c +++ b/arch/arm/mach-s3c64xx/mach-anw6410.c @@ -49,6 +49,7 @@ #include <plat/devs.h> #include <plat/cpu.h> #include <mach/regs-gpio.h> +#include <plat/samsung-time.h> #include "common.h" #include "regs-modem.h" @@ -208,6 +209,7 @@ static void __init anw6410_map_io(void) s3c64xx_init_io(anw6410_iodesc, ARRAY_SIZE(anw6410_iodesc)); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(anw6410_uartcfgs, ARRAY_SIZE(anw6410_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); anw6410_lcd_mode_set(); } @@ -232,6 +234,6 @@ MACHINE_START(ANW6410, "A&W6410") .map_io = anw6410_map_io, .init_machine = anw6410_machine_init, .init_late = s3c64xx_init_late, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c64xx_restart, MACHINE_END diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c index bf3d1c09b085..7ccfef227c77 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c @@ -208,8 +208,9 @@ static const struct i2c_board_info wm1277_devs[] = { static struct arizona_pdata wm5102_reva_pdata = { .ldoena = S3C64XX_GPN(7), .gpio_base = CODEC_GPIO_BASE, - .irq_active_high = true, + .irq_flags = IRQF_TRIGGER_HIGH, .micd_pol_gpio = CODEC_GPIO_BASE + 4, + .micd_rate = 6, .gpio_defaults = { [2] = 0x10000, /* AIF3TXLRCLK */ [3] = 0x4, /* OPCLK */ @@ -237,7 +238,7 @@ static struct spi_board_info wm5102_reva_spi_devs[] = { static struct arizona_pdata wm5102_pdata = { .ldoena = S3C64XX_GPN(7), .gpio_base = CODEC_GPIO_BASE, - .irq_active_high = true, + .irq_flags = IRQF_TRIGGER_HIGH, .micd_pol_gpio = CODEC_GPIO_BASE + 2, .gpio_defaults = { [2] = 0x10000, /* AIF3TXLRCLK */ diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index 1acf02bace57..8ad88ace795a 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -64,6 +64,7 @@ #include <plat/adc.h> #include <linux/platform_data/i2c-s3c2410.h> #include <plat/pm.h> +#include <plat/samsung-time.h> #include "common.h" #include "crag6410.h" @@ -744,6 +745,7 @@ static void __init crag6410_map_io(void) s3c64xx_init_io(NULL, 0); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(crag6410_uartcfgs, ARRAY_SIZE(crag6410_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); /* LCD type and Bypass set by bootloader */ } @@ -868,6 +870,6 @@ MACHINE_START(WLF_CRAGG_6410, "Wolfson Cragganmore 6410") .map_io = crag6410_map_io, .init_machine = crag6410_machine_init, .init_late = s3c64xx_init_late, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c64xx_restart, MACHINE_END diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c index 7212eb9cfeb9..5b7f357d8c22 100644 --- a/arch/arm/mach-s3c64xx/mach-hmt.c +++ b/arch/arm/mach-s3c64xx/mach-hmt.c @@ -41,6 +41,7 @@ #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> +#include <plat/samsung-time.h> #include "common.h" @@ -248,6 +249,7 @@ static void __init hmt_map_io(void) s3c64xx_init_io(hmt_iodesc, ARRAY_SIZE(hmt_iodesc)); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(hmt_uartcfgs, ARRAY_SIZE(hmt_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init hmt_machine_init(void) @@ -275,6 +277,6 @@ MACHINE_START(HMT, "Airgoo-HMT") .map_io = hmt_map_io, .init_machine = hmt_machine_init, .init_late = s3c64xx_init_late, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c64xx_restart, MACHINE_END diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c index 4b41fcdaa7b6..fc043e3ecdf8 100644 --- a/arch/arm/mach-s3c64xx/mach-mini6410.c +++ b/arch/arm/mach-s3c64xx/mach-mini6410.c @@ -41,6 +41,7 @@ #include <video/platform_lcd.h> #include <video/samsung_fimd.h> +#include <plat/samsung-time.h> #include "common.h" #include "regs-modem.h" @@ -232,6 +233,7 @@ static void __init mini6410_map_io(void) s3c64xx_init_io(NULL, 0); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(mini6410_uartcfgs, ARRAY_SIZE(mini6410_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); /* set the LCD type */ tmp = __raw_readl(S3C64XX_SPCON); @@ -354,6 +356,6 @@ MACHINE_START(MINI6410, "MINI6410") .map_io = mini6410_map_io, .init_machine = mini6410_machine_init, .init_late = s3c64xx_init_late, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c64xx_restart, MACHINE_END diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c index 8d3cedd995ff..7e2c3908f1f8 100644 --- a/arch/arm/mach-s3c64xx/mach-ncp.c +++ b/arch/arm/mach-s3c64xx/mach-ncp.c @@ -43,6 +43,7 @@ #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> +#include <plat/samsung-time.h> #include "common.h" @@ -87,6 +88,7 @@ static void __init ncp_map_io(void) s3c64xx_init_io(ncp_iodesc, ARRAY_SIZE(ncp_iodesc)); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(ncp_uartcfgs, ARRAY_SIZE(ncp_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init ncp_machine_init(void) @@ -103,6 +105,6 @@ MACHINE_START(NCP, "NCP") .map_io = ncp_map_io, .init_machine = ncp_machine_init, .init_late = s3c64xx_init_late, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c64xx_restart, MACHINE_END diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c index fa12bd21ad82..8bed37b3d5ac 100644 --- a/arch/arm/mach-s3c64xx/mach-real6410.c +++ b/arch/arm/mach-s3c64xx/mach-real6410.c @@ -42,6 +42,7 @@ #include <video/platform_lcd.h> #include <video/samsung_fimd.h> +#include <plat/samsung-time.h> #include "common.h" #include "regs-modem.h" @@ -211,6 +212,7 @@ static void __init real6410_map_io(void) s3c64xx_init_io(NULL, 0); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(real6410_uartcfgs, ARRAY_SIZE(real6410_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); /* set the LCD type */ tmp = __raw_readl(S3C64XX_SPCON); @@ -333,6 +335,6 @@ MACHINE_START(REAL6410, "REAL6410") .map_io = real6410_map_io, .init_machine = real6410_machine_init, .init_late = s3c64xx_init_late, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c64xx_restart, MACHINE_END diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c index fc3e9b32e26f..58ac99041274 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq.c +++ b/arch/arm/mach-s3c64xx/mach-smartq.c @@ -38,6 +38,7 @@ #include <linux/platform_data/touchscreen-s3c2410.h> #include <video/platform_lcd.h> +#include <plat/samsung-time.h> #include "common.h" #include "regs-modem.h" @@ -378,6 +379,7 @@ void __init smartq_map_io(void) s3c64xx_init_io(smartq_iodesc, ARRAY_SIZE(smartq_iodesc)); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(smartq_uartcfgs, ARRAY_SIZE(smartq_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); smartq_lcd_mode_set(); } diff --git a/arch/arm/mach-s3c64xx/mach-smartq5.c b/arch/arm/mach-s3c64xx/mach-smartq5.c index ca2afcfce573..8aca5daf3d05 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq5.c +++ b/arch/arm/mach-s3c64xx/mach-smartq5.c @@ -28,6 +28,7 @@ #include <plat/devs.h> #include <plat/fb.h> #include <plat/gpio-cfg.h> +#include <plat/samsung-time.h> #include "common.h" #include "mach-smartq.h" @@ -155,6 +156,6 @@ MACHINE_START(SMARTQ5, "SmartQ 5") .map_io = smartq_map_io, .init_machine = smartq5_machine_init, .init_late = s3c64xx_init_late, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c64xx_restart, MACHINE_END diff --git a/arch/arm/mach-s3c64xx/mach-smartq7.c b/arch/arm/mach-s3c64xx/mach-smartq7.c index 37bb0c632a5e..a052e107c0b4 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq7.c +++ b/arch/arm/mach-s3c64xx/mach-smartq7.c @@ -28,6 +28,7 @@ #include <plat/devs.h> #include <plat/fb.h> #include <plat/gpio-cfg.h> +#include <plat/samsung-time.h> #include "common.h" #include "mach-smartq.h" @@ -171,6 +172,6 @@ MACHINE_START(SMARTQ7, "SmartQ 7") .map_io = smartq_map_io, .init_machine = smartq7_machine_init, .init_late = s3c64xx_init_late, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c64xx_restart, MACHINE_END diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c index a392869c8342..d70c0843aea2 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6400.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c @@ -35,6 +35,7 @@ #include <plat/devs.h> #include <plat/cpu.h> #include <linux/platform_data/i2c-s3c2410.h> +#include <plat/samsung-time.h> #include "common.h" @@ -66,6 +67,7 @@ static void __init smdk6400_map_io(void) s3c64xx_init_io(smdk6400_iodesc, ARRAY_SIZE(smdk6400_iodesc)); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(smdk6400_uartcfgs, ARRAY_SIZE(smdk6400_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static struct platform_device *smdk6400_devices[] __initdata = { @@ -92,6 +94,6 @@ MACHINE_START(SMDK6400, "SMDK6400") .map_io = smdk6400_map_io, .init_machine = smdk6400_machine_init, .init_late = s3c64xx_init_late, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c64xx_restart, MACHINE_END diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c index ba7544e2d04d..bd3295a19ad7 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c @@ -69,6 +69,7 @@ #include <linux/platform_data/touchscreen-s3c2410.h> #include <plat/keypad.h> #include <plat/backlight.h> +#include <plat/samsung-time.h> #include "common.h" #include "regs-modem.h" @@ -634,6 +635,7 @@ static void __init smdk6410_map_io(void) s3c64xx_init_io(smdk6410_iodesc, ARRAY_SIZE(smdk6410_iodesc)); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(smdk6410_uartcfgs, ARRAY_SIZE(smdk6410_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); /* set the LCD type */ @@ -702,6 +704,6 @@ MACHINE_START(SMDK6410, "SMDK6410") .map_io = smdk6410_map_io, .init_machine = smdk6410_machine_init, .init_late = s3c64xx_init_late, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c64xx_restart, MACHINE_END diff --git a/arch/arm/mach-s3c64xx/setup-usb-phy.c b/arch/arm/mach-s3c64xx/setup-usb-phy.c index c8174d95339b..ca960bda02fd 100644 --- a/arch/arm/mach-s3c64xx/setup-usb-phy.c +++ b/arch/arm/mach-s3c64xx/setup-usb-phy.c @@ -76,7 +76,7 @@ static int s3c_usb_otgphy_exit(struct platform_device *pdev) int s5p_usb_phy_init(struct platform_device *pdev, int type) { - if (type == S5P_USB_PHY_DEVICE) + if (type == USB_PHY_TYPE_DEVICE) return s3c_usb_otgphy_init(pdev); return -EINVAL; @@ -84,7 +84,7 @@ int s5p_usb_phy_init(struct platform_device *pdev, int type) int s5p_usb_phy_exit(struct platform_device *pdev, int type) { - if (type == S5P_USB_PHY_DEVICE) + if (type == USB_PHY_TYPE_DEVICE) return s3c_usb_otgphy_exit(pdev); return -EINVAL; diff --git a/arch/arm/mach-s5p64x0/Kconfig b/arch/arm/mach-s5p64x0/Kconfig index e8742cb7ddd9..5a707bdb9ea0 100644 --- a/arch/arm/mach-s5p64x0/Kconfig +++ b/arch/arm/mach-s5p64x0/Kconfig @@ -9,16 +9,16 @@ if ARCH_S5P64X0 config CPU_S5P6440 bool - select S5P_HRT select S5P_SLEEP if PM select SAMSUNG_DMADEV + select SAMSUNG_HRT select SAMSUNG_WAKEMASK if PM help Enable S5P6440 CPU support config CPU_S5P6450 bool - select S5P_HRT + select SAMSUNG_HRT select S5P_SLEEP if PM select SAMSUNG_DMADEV select SAMSUNG_WAKEMASK if PM diff --git a/arch/arm/mach-s5p64x0/include/mach/debug-macro.S b/arch/arm/mach-s5p64x0/include/mach/debug-macro.S index e80ba3c69814..5e2916fb19a9 100644 --- a/arch/arm/mach-s5p64x0/include/mach/debug-macro.S +++ b/arch/arm/mach-s5p64x0/include/mach/debug-macro.S @@ -30,4 +30,4 @@ #endif .endm -#include <plat/debug-macro.S> +#include <debug/samsung.S> diff --git a/arch/arm/mach-s5p64x0/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c index e23723a5a214..73f71a698a34 100644 --- a/arch/arm/mach-s5p64x0/mach-smdk6440.c +++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c @@ -48,7 +48,7 @@ #include <plat/pll.h> #include <plat/adc.h> #include <linux/platform_data/touchscreen-s3c2410.h> -#include <plat/s5p-time.h> +#include <plat/samsung-time.h> #include <plat/backlight.h> #include <plat/fb.h> #include <plat/sdhci.h> @@ -229,7 +229,7 @@ static void __init smdk6440_map_io(void) s5p64x0_init_io(NULL, 0); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(smdk6440_uartcfgs, ARRAY_SIZE(smdk6440_uartcfgs)); - s5p_set_timer_source(S5P_PWM3, S5P_PWM4); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void s5p6440_set_lcd_interface(void) @@ -273,6 +273,6 @@ MACHINE_START(SMDK6440, "SMDK6440") .init_irq = s5p6440_init_irq, .map_io = smdk6440_map_io, .init_machine = smdk6440_machine_init, - .init_time = s5p_timer_init, + .init_time = samsung_timer_init, .restart = s5p64x0_restart, MACHINE_END diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c index ca10963a959e..18303e12019f 100644 --- a/arch/arm/mach-s5p64x0/mach-smdk6450.c +++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c @@ -48,7 +48,7 @@ #include <plat/pll.h> #include <plat/adc.h> #include <linux/platform_data/touchscreen-s3c2410.h> -#include <plat/s5p-time.h> +#include <plat/samsung-time.h> #include <plat/backlight.h> #include <plat/fb.h> #include <plat/sdhci.h> @@ -248,7 +248,7 @@ static void __init smdk6450_map_io(void) s5p64x0_init_io(NULL, 0); s3c24xx_init_clocks(19200000); s3c24xx_init_uarts(smdk6450_uartcfgs, ARRAY_SIZE(smdk6450_uartcfgs)); - s5p_set_timer_source(S5P_PWM3, S5P_PWM4); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void s5p6450_set_lcd_interface(void) @@ -292,6 +292,6 @@ MACHINE_START(SMDK6450, "SMDK6450") .init_irq = s5p6450_init_irq, .map_io = smdk6450_map_io, .init_machine = smdk6450_machine_init, - .init_time = s5p_timer_init, + .init_time = samsung_timer_init, .restart = s5p64x0_restart, MACHINE_END diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig index 15170be97a74..2f456a4533ba 100644 --- a/arch/arm/mach-s5pc100/Kconfig +++ b/arch/arm/mach-s5pc100/Kconfig @@ -11,6 +11,7 @@ config CPU_S5PC100 bool select S5P_EXT_INT select SAMSUNG_DMADEV + select SAMSUNG_HRT help Enable S5PC100 CPU support diff --git a/arch/arm/mach-s5pc100/common.h b/arch/arm/mach-s5pc100/common.h index 9fbd3ae2b401..c41f912e9e1f 100644 --- a/arch/arm/mach-s5pc100/common.h +++ b/arch/arm/mach-s5pc100/common.h @@ -20,18 +20,9 @@ void s5pc100_setup_clocks(void); void s5pc100_restart(char mode, const char *cmd); -#ifdef CONFIG_CPU_S5PC100 - extern int s5pc100_init(void); extern void s5pc100_map_io(void); extern void s5pc100_init_clocks(int xtal); extern void s5pc100_init_uarts(struct s3c2410_uartcfg *cfg, int no); -#else -#define s5pc100_init_clocks NULL -#define s5pc100_init_uarts NULL -#define s5pc100_map_io NULL -#define s5pc100_init NULL -#endif - #endif /* __ARCH_ARM_MACH_S5PC100_COMMON_H */ diff --git a/arch/arm/mach-s5pc100/include/mach/debug-macro.S b/arch/arm/mach-s5pc100/include/mach/debug-macro.S index 694f75937000..66cb7f16bf2a 100644 --- a/arch/arm/mach-s5pc100/include/mach/debug-macro.S +++ b/arch/arm/mach-s5pc100/include/mach/debug-macro.S @@ -36,4 +36,4 @@ * will be fine with us. */ -#include <plat/debug-macro.S> +#include <debug/samsung.S> diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c index 185a19583898..8c880f76f274 100644 --- a/arch/arm/mach-s5pc100/mach-smdkc100.c +++ b/arch/arm/mach-s5pc100/mach-smdkc100.c @@ -51,6 +51,7 @@ #include <linux/platform_data/touchscreen-s3c2410.h> #include <linux/platform_data/asoc-s3c.h> #include <plat/backlight.h> +#include <plat/samsung-time.h> #include "common.h" @@ -221,6 +222,7 @@ static void __init smdkc100_map_io(void) s5pc100_init_io(NULL, 0); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(smdkc100_uartcfgs, ARRAY_SIZE(smdkc100_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init smdkc100_machine_init(void) @@ -255,6 +257,6 @@ MACHINE_START(SMDKC100, "SMDKC100") .init_irq = s5pc100_init_irq, .map_io = smdkc100_map_io, .init_machine = smdkc100_machine_init, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s5pc100_restart, MACHINE_END diff --git a/arch/arm/mach-s5pc100/setup-sdhci-gpio.c b/arch/arm/mach-s5pc100/setup-sdhci-gpio.c index 03c02d04c68c..6010c0310cb5 100644 --- a/arch/arm/mach-s5pc100/setup-sdhci-gpio.c +++ b/arch/arm/mach-s5pc100/setup-sdhci-gpio.c @@ -19,7 +19,6 @@ #include <linux/mmc/card.h> #include <plat/gpio-cfg.h> -#include <plat/regs-sdhci.h> #include <plat/sdhci.h> void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig index 92ad72f0ef98..0963283a7c5d 100644 --- a/arch/arm/mach-s5pv210/Kconfig +++ b/arch/arm/mach-s5pv210/Kconfig @@ -12,10 +12,10 @@ if ARCH_S5PV210 config CPU_S5PV210 bool select S5P_EXT_INT - select S5P_HRT select S5P_PM if PM select S5P_SLEEP if PM select SAMSUNG_DMADEV + select SAMSUNG_HRT help Enable S5PV210 CPU support diff --git a/arch/arm/mach-s5pv210/common.h b/arch/arm/mach-s5pv210/common.h index 6ed2af5c7518..0a1cc0aef720 100644 --- a/arch/arm/mach-s5pv210/common.h +++ b/arch/arm/mach-s5pv210/common.h @@ -20,18 +20,9 @@ void s5pv210_setup_clocks(void); void s5pv210_restart(char mode, const char *cmd); -#ifdef CONFIG_CPU_S5PV210 - extern int s5pv210_init(void); extern void s5pv210_map_io(void); extern void s5pv210_init_clocks(int xtal); extern void s5pv210_init_uarts(struct s3c2410_uartcfg *cfg, int no); -#else -#define s5pv210_init_clocks NULL -#define s5pv210_init_uarts NULL -#define s5pv210_map_io NULL -#define s5pv210_init NULL -#endif - #endif /* __ARCH_ARM_MACH_S5PV210_COMMON_H */ diff --git a/arch/arm/mach-s5pv210/include/mach/debug-macro.S b/arch/arm/mach-s5pv210/include/mach/debug-macro.S index 79e55597ab63..80c21996c943 100644 --- a/arch/arm/mach-s5pv210/include/mach/debug-macro.S +++ b/arch/arm/mach-s5pv210/include/mach/debug-macro.S @@ -38,4 +38,4 @@ * will be fine with us. */ -#include <plat/debug-macro.S> +#include <debug/samsung.S> diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c index 11900a8e88a3..ed2b85485b9d 100644 --- a/arch/arm/mach-s5pv210/mach-aquila.c +++ b/arch/arm/mach-s5pv210/mach-aquila.c @@ -38,7 +38,7 @@ #include <plat/fb.h> #include <plat/fimc-core.h> #include <plat/sdhci.h> -#include <plat/s5p-time.h> +#include <plat/samsung-time.h> #include "common.h" @@ -651,7 +651,7 @@ static void __init aquila_map_io(void) s5pv210_init_io(NULL, 0); s3c24xx_init_clocks(24000000); s3c24xx_init_uarts(aquila_uartcfgs, ARRAY_SIZE(aquila_uartcfgs)); - s5p_set_timer_source(S5P_PWM3, S5P_PWM4); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init aquila_machine_init(void) @@ -686,6 +686,6 @@ MACHINE_START(AQUILA, "Aquila") .init_irq = s5pv210_init_irq, .map_io = aquila_map_io, .init_machine = aquila_machine_init, - .init_time = s5p_timer_init, + .init_time = samsung_timer_init, .restart = s5pv210_restart, MACHINE_END diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index e373de44a8b6..30b24ad84f49 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -47,7 +47,7 @@ #include <plat/keypad.h> #include <plat/sdhci.h> #include <plat/clock.h> -#include <plat/s5p-time.h> +#include <plat/samsung-time.h> #include <plat/mfc.h> #include <plat/camport.h> @@ -908,7 +908,7 @@ static void __init goni_map_io(void) s5pv210_init_io(NULL, 0); s3c24xx_init_clocks(clk_xusbxti.rate); s3c24xx_init_uarts(goni_uartcfgs, ARRAY_SIZE(goni_uartcfgs)); - s5p_set_timer_source(S5P_PWM3, S5P_PWM4); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init goni_reserve(void) @@ -973,7 +973,7 @@ MACHINE_START(GONI, "GONI") .init_irq = s5pv210_init_irq, .map_io = goni_map_io, .init_machine = goni_machine_init, - .init_time = s5p_timer_init, + .init_time = samsung_timer_init, .reserve = &goni_reserve, .restart = s5pv210_restart, MACHINE_END diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c index 28bd0248a3e2..7c0ed07a78a3 100644 --- a/arch/arm/mach-s5pv210/mach-smdkc110.c +++ b/arch/arm/mach-s5pv210/mach-smdkc110.c @@ -29,7 +29,7 @@ #include <linux/platform_data/ata-samsung_cf.h> #include <linux/platform_data/i2c-s3c2410.h> #include <plat/pm.h> -#include <plat/s5p-time.h> +#include <plat/samsung-time.h> #include <plat/mfc.h> #include "common.h" @@ -120,7 +120,7 @@ static void __init smdkc110_map_io(void) s5pv210_init_io(NULL, 0); s3c24xx_init_clocks(24000000); s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs)); - s5p_set_timer_source(S5P_PWM3, S5P_PWM4); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init smdkc110_reserve(void) @@ -153,7 +153,7 @@ MACHINE_START(SMDKC110, "SMDKC110") .init_irq = s5pv210_init_irq, .map_io = smdkc110_map_io, .init_machine = smdkc110_machine_init, - .init_time = s5p_timer_init, + .init_time = samsung_timer_init, .restart = s5pv210_restart, .reserve = &smdkc110_reserve, MACHINE_END diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c index 3c73f36869bb..d50b6f124465 100644 --- a/arch/arm/mach-s5pv210/mach-smdkv210.c +++ b/arch/arm/mach-s5pv210/mach-smdkv210.c @@ -44,7 +44,7 @@ #include <plat/keypad.h> #include <plat/pm.h> #include <plat/fb.h> -#include <plat/s5p-time.h> +#include <plat/samsung-time.h> #include <plat/backlight.h> #include <plat/mfc.h> #include <plat/clock.h> @@ -285,7 +285,7 @@ static void __init smdkv210_map_io(void) s5pv210_init_io(NULL, 0); s3c24xx_init_clocks(clk_xusbxti.rate); s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs)); - s5p_set_timer_source(S5P_PWM2, S5P_PWM4); + samsung_set_timer_source(SAMSUNG_PWM2, SAMSUNG_PWM4); } static void __init smdkv210_reserve(void) @@ -329,7 +329,7 @@ MACHINE_START(SMDKV210, "SMDKV210") .init_irq = s5pv210_init_irq, .map_io = smdkv210_map_io, .init_machine = smdkv210_machine_init, - .init_time = s5p_timer_init, + .init_time = samsung_timer_init, .restart = s5pv210_restart, .reserve = &smdkv210_reserve, MACHINE_END diff --git a/arch/arm/mach-s5pv210/mach-torbreck.c b/arch/arm/mach-s5pv210/mach-torbreck.c index 2d4c5531819c..579afe89842a 100644 --- a/arch/arm/mach-s5pv210/mach-torbreck.c +++ b/arch/arm/mach-s5pv210/mach-torbreck.c @@ -26,7 +26,7 @@ #include <plat/devs.h> #include <plat/cpu.h> #include <linux/platform_data/i2c-s3c2410.h> -#include <plat/s5p-time.h> +#include <plat/samsung-time.h> #include "common.h" @@ -106,7 +106,7 @@ static void __init torbreck_map_io(void) s5pv210_init_io(NULL, 0); s3c24xx_init_clocks(24000000); s3c24xx_init_uarts(torbreck_uartcfgs, ARRAY_SIZE(torbreck_uartcfgs)); - s5p_set_timer_source(S5P_PWM3, S5P_PWM4); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init torbreck_machine_init(void) @@ -130,6 +130,6 @@ MACHINE_START(TORBRECK, "TORBRECK") .init_irq = s5pv210_init_irq, .map_io = torbreck_map_io, .init_machine = torbreck_machine_init, - .init_time = s5p_timer_init, + .init_time = samsung_timer_init, .restart = s5pv210_restart, MACHINE_END diff --git a/arch/arm/mach-s5pv210/setup-sdhci-gpio.c b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c index 3e3ac05bb7b1..0512ada00522 100644 --- a/arch/arm/mach-s5pv210/setup-sdhci-gpio.c +++ b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c @@ -20,7 +20,6 @@ #include <linux/mmc/card.h> #include <plat/gpio-cfg.h> -#include <plat/regs-sdhci.h> #include <plat/sdhci.h> void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) diff --git a/arch/arm/mach-s5pv210/setup-usb-phy.c b/arch/arm/mach-s5pv210/setup-usb-phy.c index 356a0900af03..b2ee5333f89c 100644 --- a/arch/arm/mach-s5pv210/setup-usb-phy.c +++ b/arch/arm/mach-s5pv210/setup-usb-phy.c @@ -80,7 +80,7 @@ static int s5pv210_usb_otgphy_exit(struct platform_device *pdev) int s5p_usb_phy_init(struct platform_device *pdev, int type) { - if (type == S5P_USB_PHY_DEVICE) + if (type == USB_PHY_TYPE_DEVICE) return s5pv210_usb_otgphy_init(pdev); return -EINVAL; @@ -88,7 +88,7 @@ int s5p_usb_phy_init(struct platform_device *pdev, int type) int s5p_usb_phy_exit(struct platform_device *pdev, int type) { - if (type == S5P_USB_PHY_DEVICE) + if (type == USB_PHY_TYPE_DEVICE) return s5pv210_usb_otgphy_exit(pdev); return -EINVAL; diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig index ca14dbdcfb22..04f9784ff0ed 100644 --- a/arch/arm/mach-sa1100/Kconfig +++ b/arch/arm/mach-sa1100/Kconfig @@ -4,7 +4,7 @@ menu "SA11x0 Implementations" config SA1100_ASSABET bool "Assabet" - select CPU_FREQ_SA1110 + select ARM_SA1110_CPUFREQ help Say Y here if you are using the Intel(R) StrongARM(R) SA-1110 Microprocessor Development Board (also known as the Assabet). @@ -20,7 +20,7 @@ config ASSABET_NEPONSET config SA1100_CERF bool "CerfBoard" - select CPU_FREQ_SA1110 + select ARM_SA1110_CPUFREQ help The Intrinsyc CerfBoard is based on the StrongARM 1110 (Discontinued). More information is available at: @@ -47,7 +47,7 @@ endchoice config SA1100_COLLIE bool "Sharp Zaurus SL5500" - # FIXME: select CPU_FREQ_SA11x0 + # FIXME: select ARM_SA11x0_CPUFREQ select SHARP_LOCOMO select SHARP_PARAM select SHARP_SCOOP @@ -56,7 +56,7 @@ config SA1100_COLLIE config SA1100_H3100 bool "Compaq iPAQ H3100" - select CPU_FREQ_SA1110 + select ARM_SA1110_CPUFREQ select HTC_EGPIO help Say Y here if you intend to run this kernel on the Compaq iPAQ @@ -67,7 +67,7 @@ config SA1100_H3100 config SA1100_H3600 bool "Compaq iPAQ H3600/H3700" - select CPU_FREQ_SA1110 + select ARM_SA1110_CPUFREQ select HTC_EGPIO help Say Y here if you intend to run this kernel on the Compaq iPAQ @@ -78,7 +78,7 @@ config SA1100_H3600 config SA1100_BADGE4 bool "HP Labs BadgePAD 4" - select CPU_FREQ_SA1100 + select ARM_SA1100_CPUFREQ select SA1111 help Say Y here if you want to build a kernel for the HP Laboratories @@ -86,7 +86,7 @@ config SA1100_BADGE4 config SA1100_JORNADA720 bool "HP Jornada 720" - # FIXME: select CPU_FREQ_SA11x0 + # FIXME: select ARM_SA11x0_CPUFREQ select SA1111 help Say Y here if you want to build a kernel for the HP Jornada 720 @@ -105,14 +105,14 @@ config SA1100_JORNADA720_SSP config SA1100_HACKKIT bool "HackKit Core CPU Board" - select CPU_FREQ_SA1100 + select ARM_SA1100_CPUFREQ help Say Y here to support the HackKit Core CPU Board <http://hackkit.eletztrick.de>; config SA1100_LART bool "LART" - select CPU_FREQ_SA1100 + select ARM_SA1100_CPUFREQ help Say Y here if you are using the Linux Advanced Radio Terminal (also known as the LART). See <http://www.lartmaker.nl/> for @@ -120,7 +120,7 @@ config SA1100_LART config SA1100_NANOENGINE bool "nanoEngine" - select CPU_FREQ_SA1110 + select ARM_SA1110_CPUFREQ select PCI select PCI_NANOENGINE help @@ -130,7 +130,7 @@ config SA1100_NANOENGINE config SA1100_PLEB bool "PLEB" - select CPU_FREQ_SA1100 + select ARM_SA1100_CPUFREQ help Say Y here if you are using version 1 of the Portable Linux Embedded Board (also known as PLEB). @@ -139,7 +139,7 @@ config SA1100_PLEB config SA1100_SHANNON bool "Shannon" - select CPU_FREQ_SA1100 + select ARM_SA1100_CPUFREQ help The Shannon (also known as a Tuxscreen, and also as a IS2630) was a limited edition webphone produced by Philips. The Shannon is a SA1100 @@ -148,7 +148,7 @@ config SA1100_SHANNON config SA1100_SIMPAD bool "Simpad" - select CPU_FREQ_SA1110 + select ARM_SA1110_CPUFREQ help The SIEMENS webpad SIMpad is based on the StrongARM 1110. There are two different versions CL4 and SL4. CL4 has 32MB RAM and 16MB diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile index 1aed9e70465d..2732eef48966 100644 --- a/arch/arm/mach-sa1100/Makefile +++ b/arch/arm/mach-sa1100/Makefile @@ -8,9 +8,6 @@ obj-m := obj-n := obj- := -obj-$(CONFIG_CPU_FREQ_SA1100) += cpu-sa1100.o -obj-$(CONFIG_CPU_FREQ_SA1110) += cpu-sa1110.o - # Specific board support obj-$(CONFIG_SA1100_ASSABET) += assabet.o obj-$(CONFIG_ASSABET_NEPONSET) += neponset.o diff --git a/arch/arm/mach-sa1100/cpu-sa1100.c b/arch/arm/mach-sa1100/cpu-sa1100.c deleted file mode 100644 index e8f4d1e19233..000000000000 --- a/arch/arm/mach-sa1100/cpu-sa1100.c +++ /dev/null @@ -1,249 +0,0 @@ -/* - * cpu-sa1100.c: clock scaling for the SA1100 - * - * Copyright (C) 2000 2001, The Delft University of Technology - * - * Authors: - * - Johan Pouwelse (J.A.Pouwelse@its.tudelft.nl): initial version - * - Erik Mouw (J.A.K.Mouw@its.tudelft.nl): - * - major rewrite for linux-2.3.99 - * - rewritten for the more generic power management scheme in - * linux-2.4.5-rmk1 - * - * This software has been developed while working on the LART - * computing board (http://www.lartmaker.nl/), which is - * sponsored by the Mobile Multi-media Communications - * (http://www.mobimedia.org/) and Ubiquitous Communications - * (http://www.ubicom.tudelft.nl/) projects. - * - * The authors can be reached at: - * - * Erik Mouw - * Information and Communication Theory Group - * Faculty of Information Technology and Systems - * Delft University of Technology - * P.O. Box 5031 - * 2600 GA Delft - * The Netherlands - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * - * Theory of operations - * ==================== - * - * Clock scaling can be used to lower the power consumption of the CPU - * core. This will give you a somewhat longer running time. - * - * The SA-1100 has a single register to change the core clock speed: - * - * PPCR 0x90020014 PLL config - * - * However, the DRAM timings are closely related to the core clock - * speed, so we need to change these, too. The used registers are: - * - * MDCNFG 0xA0000000 DRAM config - * MDCAS0 0xA0000004 Access waveform - * MDCAS1 0xA0000008 Access waveform - * MDCAS2 0xA000000C Access waveform - * - * Care must be taken to change the DRAM parameters the correct way, - * because otherwise the DRAM becomes unusable and the kernel will - * crash. - * - * The simple solution to avoid a kernel crash is to put the actual - * clock change in ROM and jump to that code from the kernel. The main - * disadvantage is that the ROM has to be modified, which is not - * possible on all SA-1100 platforms. Another disadvantage is that - * jumping to ROM makes clock switching unnecessary complicated. - * - * The idea behind this driver is that the memory configuration can be - * changed while running from DRAM (even with interrupts turned on!) - * as long as all re-configuration steps yield a valid DRAM - * configuration. The advantages are clear: it will run on all SA-1100 - * platforms, and the code is very simple. - * - * If you really want to understand what is going on in - * sa1100_update_dram_timings(), you'll have to read sections 8.2, - * 9.5.7.3, and 10.2 from the "Intel StrongARM SA-1100 Microprocessor - * Developers Manual" (available for free from Intel). - * - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <linux/io.h> - -#include <asm/cputype.h> - -#include <mach/hardware.h> - -#include "generic.h" - -struct sa1100_dram_regs { - int speed; - u32 mdcnfg; - u32 mdcas0; - u32 mdcas1; - u32 mdcas2; -}; - - -static struct cpufreq_driver sa1100_driver; - -static struct sa1100_dram_regs sa1100_dram_settings[] = { - /*speed, mdcnfg, mdcas0, mdcas1, mdcas2, clock freq */ - { 59000, 0x00dc88a3, 0xcccccccf, 0xfffffffc, 0xffffffff},/* 59.0 MHz */ - { 73700, 0x011490a3, 0xcccccccf, 0xfffffffc, 0xffffffff},/* 73.7 MHz */ - { 88500, 0x014e90a3, 0xcccccccf, 0xfffffffc, 0xffffffff},/* 88.5 MHz */ - {103200, 0x01889923, 0xcccccccf, 0xfffffffc, 0xffffffff},/* 103.2 MHz */ - {118000, 0x01c29923, 0x9999998f, 0xfffffff9, 0xffffffff},/* 118.0 MHz */ - {132700, 0x01fb2123, 0x9999998f, 0xfffffff9, 0xffffffff},/* 132.7 MHz */ - {147500, 0x02352123, 0x3333330f, 0xfffffff3, 0xffffffff},/* 147.5 MHz */ - {162200, 0x026b29a3, 0x38e38e1f, 0xfff8e38e, 0xffffffff},/* 162.2 MHz */ - {176900, 0x02a329a3, 0x71c71c1f, 0xfff1c71c, 0xffffffff},/* 176.9 MHz */ - {191700, 0x02dd31a3, 0xe38e383f, 0xffe38e38, 0xffffffff},/* 191.7 MHz */ - {206400, 0x03153223, 0xc71c703f, 0xffc71c71, 0xffffffff},/* 206.4 MHz */ - {221200, 0x034fba23, 0xc71c703f, 0xffc71c71, 0xffffffff},/* 221.2 MHz */ - {235900, 0x03853a23, 0xe1e1e07f, 0xe1e1e1e1, 0xffffffe1},/* 235.9 MHz */ - {250700, 0x03bf3aa3, 0xc3c3c07f, 0xc3c3c3c3, 0xffffffc3},/* 250.7 MHz */ - {265400, 0x03f7c2a3, 0xc3c3c07f, 0xc3c3c3c3, 0xffffffc3},/* 265.4 MHz */ - {280200, 0x0431c2a3, 0x878780ff, 0x87878787, 0xffffff87},/* 280.2 MHz */ - { 0, 0, 0, 0, 0 } /* last entry */ -}; - -static void sa1100_update_dram_timings(int current_speed, int new_speed) -{ - struct sa1100_dram_regs *settings = sa1100_dram_settings; - - /* find speed */ - while (settings->speed != 0) { - if (new_speed == settings->speed) - break; - - settings++; - } - - if (settings->speed == 0) { - panic("%s: couldn't find dram setting for speed %d\n", - __func__, new_speed); - } - - /* No risk, no fun: run with interrupts on! */ - if (new_speed > current_speed) { - /* We're going FASTER, so first relax the memory - * timings before changing the core frequency - */ - - /* Half the memory access clock */ - MDCNFG |= MDCNFG_CDB2; - - /* The order of these statements IS important, keep 8 - * pulses!! - */ - MDCAS2 = settings->mdcas2; - MDCAS1 = settings->mdcas1; - MDCAS0 = settings->mdcas0; - MDCNFG = settings->mdcnfg; - } else { - /* We're going SLOWER: first decrease the core - * frequency and then tighten the memory settings. - */ - - /* Half the memory access clock */ - MDCNFG |= MDCNFG_CDB2; - - /* The order of these statements IS important, keep 8 - * pulses!! - */ - MDCAS0 = settings->mdcas0; - MDCAS1 = settings->mdcas1; - MDCAS2 = settings->mdcas2; - MDCNFG = settings->mdcnfg; - } -} - -static int sa1100_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - unsigned int cur = sa11x0_getspeed(0); - unsigned int new_ppcr; - struct cpufreq_freqs freqs; - - new_ppcr = sa11x0_freq_to_ppcr(target_freq); - switch (relation) { - case CPUFREQ_RELATION_L: - if (sa11x0_ppcr_to_freq(new_ppcr) > policy->max) - new_ppcr--; - break; - case CPUFREQ_RELATION_H: - if ((sa11x0_ppcr_to_freq(new_ppcr) > target_freq) && - (sa11x0_ppcr_to_freq(new_ppcr - 1) >= policy->min)) - new_ppcr--; - break; - } - - freqs.old = cur; - freqs.new = sa11x0_ppcr_to_freq(new_ppcr); - freqs.cpu = 0; - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - if (freqs.new > cur) - sa1100_update_dram_timings(cur, freqs.new); - - PPCR = new_ppcr; - - if (freqs.new < cur) - sa1100_update_dram_timings(cur, freqs.new); - - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - return 0; -} - -static int __init sa1100_cpu_init(struct cpufreq_policy *policy) -{ - if (policy->cpu != 0) - return -EINVAL; - policy->cur = policy->min = policy->max = sa11x0_getspeed(0); - policy->cpuinfo.min_freq = 59000; - policy->cpuinfo.max_freq = 287000; - policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; - return 0; -} - -static struct cpufreq_driver sa1100_driver __refdata = { - .flags = CPUFREQ_STICKY, - .verify = sa11x0_verify_speed, - .target = sa1100_target, - .get = sa11x0_getspeed, - .init = sa1100_cpu_init, - .name = "sa1100", -}; - -static int __init sa1100_dram_init(void) -{ - if (cpu_is_sa1100()) - return cpufreq_register_driver(&sa1100_driver); - else - return -ENODEV; -} - -arch_initcall(sa1100_dram_init); diff --git a/arch/arm/mach-sa1100/cpu-sa1110.c b/arch/arm/mach-sa1100/cpu-sa1110.c deleted file mode 100644 index 48c45b0c92bb..000000000000 --- a/arch/arm/mach-sa1100/cpu-sa1110.c +++ /dev/null @@ -1,408 +0,0 @@ -/* - * linux/arch/arm/mach-sa1100/cpu-sa1110.c - * - * Copyright (C) 2001 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Note: there are two erratas that apply to the SA1110 here: - * 7 - SDRAM auto-power-up failure (rev A0) - * 13 - Corruption of internal register reads/writes following - * SDRAM reads (rev A0, B0, B1) - * - * We ignore rev. A0 and B0 devices; I don't think they're worth supporting. - * - * The SDRAM type can be passed on the command line as cpu_sa1110.sdram=type - */ -#include <linux/cpufreq.h> -#include <linux/delay.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/kernel.h> -#include <linux/moduleparam.h> -#include <linux/types.h> - -#include <asm/cputype.h> -#include <asm/mach-types.h> - -#include <mach/hardware.h> - -#include "generic.h" - -#undef DEBUG - -struct sdram_params { - const char name[20]; - u_char rows; /* bits */ - u_char cas_latency; /* cycles */ - u_char tck; /* clock cycle time (ns) */ - u_char trcd; /* activate to r/w (ns) */ - u_char trp; /* precharge to activate (ns) */ - u_char twr; /* write recovery time (ns) */ - u_short refresh; /* refresh time for array (us) */ -}; - -struct sdram_info { - u_int mdcnfg; - u_int mdrefr; - u_int mdcas[3]; -}; - -static struct sdram_params sdram_tbl[] __initdata = { - { /* Toshiba TC59SM716 CL2 */ - .name = "TC59SM716-CL2", - .rows = 12, - .tck = 10, - .trcd = 20, - .trp = 20, - .twr = 10, - .refresh = 64000, - .cas_latency = 2, - }, { /* Toshiba TC59SM716 CL3 */ - .name = "TC59SM716-CL3", - .rows = 12, - .tck = 8, - .trcd = 20, - .trp = 20, - .twr = 8, - .refresh = 64000, - .cas_latency = 3, - }, { /* Samsung K4S641632D TC75 */ - .name = "K4S641632D", - .rows = 14, - .tck = 9, - .trcd = 27, - .trp = 20, - .twr = 9, - .refresh = 64000, - .cas_latency = 3, - }, { /* Samsung K4S281632B-1H */ - .name = "K4S281632B-1H", - .rows = 12, - .tck = 10, - .trp = 20, - .twr = 10, - .refresh = 64000, - .cas_latency = 3, - }, { /* Samsung KM416S4030CT */ - .name = "KM416S4030CT", - .rows = 13, - .tck = 8, - .trcd = 24, /* 3 CLKs */ - .trp = 24, /* 3 CLKs */ - .twr = 16, /* Trdl: 2 CLKs */ - .refresh = 64000, - .cas_latency = 3, - }, { /* Winbond W982516AH75L CL3 */ - .name = "W982516AH75L", - .rows = 16, - .tck = 8, - .trcd = 20, - .trp = 20, - .twr = 8, - .refresh = 64000, - .cas_latency = 3, - }, { /* Micron MT48LC8M16A2TG-75 */ - .name = "MT48LC8M16A2TG-75", - .rows = 12, - .tck = 8, - .trcd = 20, - .trp = 20, - .twr = 8, - .refresh = 64000, - .cas_latency = 3, - }, -}; - -static struct sdram_params sdram_params; - -/* - * Given a period in ns and frequency in khz, calculate the number of - * cycles of frequency in period. Note that we round up to the next - * cycle, even if we are only slightly over. - */ -static inline u_int ns_to_cycles(u_int ns, u_int khz) -{ - return (ns * khz + 999999) / 1000000; -} - -/* - * Create the MDCAS register bit pattern. - */ -static inline void set_mdcas(u_int *mdcas, int delayed, u_int rcd) -{ - u_int shift; - - rcd = 2 * rcd - 1; - shift = delayed + 1 + rcd; - - mdcas[0] = (1 << rcd) - 1; - mdcas[0] |= 0x55555555 << shift; - mdcas[1] = mdcas[2] = 0x55555555 << (shift & 1); -} - -static void -sdram_calculate_timing(struct sdram_info *sd, u_int cpu_khz, - struct sdram_params *sdram) -{ - u_int mem_khz, sd_khz, trp, twr; - - mem_khz = cpu_khz / 2; - sd_khz = mem_khz; - - /* - * If SDCLK would invalidate the SDRAM timings, - * run SDCLK at half speed. - * - * CPU steppings prior to B2 must either run the memory at - * half speed or use delayed read latching (errata 13). - */ - if ((ns_to_cycles(sdram->tck, sd_khz) > 1) || - (CPU_REVISION < CPU_SA1110_B2 && sd_khz < 62000)) - sd_khz /= 2; - - sd->mdcnfg = MDCNFG & 0x007f007f; - - twr = ns_to_cycles(sdram->twr, mem_khz); - - /* trp should always be >1 */ - trp = ns_to_cycles(sdram->trp, mem_khz) - 1; - if (trp < 1) - trp = 1; - - sd->mdcnfg |= trp << 8; - sd->mdcnfg |= trp << 24; - sd->mdcnfg |= sdram->cas_latency << 12; - sd->mdcnfg |= sdram->cas_latency << 28; - sd->mdcnfg |= twr << 14; - sd->mdcnfg |= twr << 30; - - sd->mdrefr = MDREFR & 0xffbffff0; - sd->mdrefr |= 7; - - if (sd_khz != mem_khz) - sd->mdrefr |= MDREFR_K1DB2; - - /* initial number of '1's in MDCAS + 1 */ - set_mdcas(sd->mdcas, sd_khz >= 62000, - ns_to_cycles(sdram->trcd, mem_khz)); - -#ifdef DEBUG - printk(KERN_DEBUG "MDCNFG: %08x MDREFR: %08x MDCAS0: %08x MDCAS1: %08x MDCAS2: %08x\n", - sd->mdcnfg, sd->mdrefr, sd->mdcas[0], sd->mdcas[1], - sd->mdcas[2]); -#endif -} - -/* - * Set the SDRAM refresh rate. - */ -static inline void sdram_set_refresh(u_int dri) -{ - MDREFR = (MDREFR & 0xffff000f) | (dri << 4); - (void) MDREFR; -} - -/* - * Update the refresh period. We do this such that we always refresh - * the SDRAMs within their permissible period. The refresh period is - * always a multiple of the memory clock (fixed at cpu_clock / 2). - * - * FIXME: we don't currently take account of burst accesses here, - * but neither do Intels DM nor Angel. - */ -static void -sdram_update_refresh(u_int cpu_khz, struct sdram_params *sdram) -{ - u_int ns_row = (sdram->refresh * 1000) >> sdram->rows; - u_int dri = ns_to_cycles(ns_row, cpu_khz / 2) / 32; - -#ifdef DEBUG - mdelay(250); - printk(KERN_DEBUG "new dri value = %d\n", dri); -#endif - - sdram_set_refresh(dri); -} - -/* - * Ok, set the CPU frequency. - */ -static int sa1110_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - struct sdram_params *sdram = &sdram_params; - struct cpufreq_freqs freqs; - struct sdram_info sd; - unsigned long flags; - unsigned int ppcr, unused; - - switch (relation) { - case CPUFREQ_RELATION_L: - ppcr = sa11x0_freq_to_ppcr(target_freq); - if (sa11x0_ppcr_to_freq(ppcr) > policy->max) - ppcr--; - break; - case CPUFREQ_RELATION_H: - ppcr = sa11x0_freq_to_ppcr(target_freq); - if (ppcr && (sa11x0_ppcr_to_freq(ppcr) > target_freq) && - (sa11x0_ppcr_to_freq(ppcr-1) >= policy->min)) - ppcr--; - break; - default: - return -EINVAL; - } - - freqs.old = sa11x0_getspeed(0); - freqs.new = sa11x0_ppcr_to_freq(ppcr); - freqs.cpu = 0; - - sdram_calculate_timing(&sd, freqs.new, sdram); - -#if 0 - /* - * These values are wrong according to the SA1110 documentation - * and errata, but they seem to work. Need to get a storage - * scope on to the SDRAM signals to work out why. - */ - if (policy->max < 147500) { - sd.mdrefr |= MDREFR_K1DB2; - sd.mdcas[0] = 0xaaaaaa7f; - } else { - sd.mdrefr &= ~MDREFR_K1DB2; - sd.mdcas[0] = 0xaaaaaa9f; - } - sd.mdcas[1] = 0xaaaaaaaa; - sd.mdcas[2] = 0xaaaaaaaa; -#endif - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - /* - * The clock could be going away for some time. Set the SDRAMs - * to refresh rapidly (every 64 memory clock cycles). To get - * through the whole array, we need to wait 262144 mclk cycles. - * We wait 20ms to be safe. - */ - sdram_set_refresh(2); - if (!irqs_disabled()) - msleep(20); - else - mdelay(20); - - /* - * Reprogram the DRAM timings with interrupts disabled, and - * ensure that we are doing this within a complete cache line. - * This means that we won't access SDRAM for the duration of - * the programming. - */ - local_irq_save(flags); - asm("mcr p15, 0, %0, c7, c10, 4" : : "r" (0)); - udelay(10); - __asm__ __volatile__("\n\ - b 2f \n\ - .align 5 \n\ -1: str %3, [%1, #0] @ MDCNFG \n\ - str %4, [%1, #28] @ MDREFR \n\ - str %5, [%1, #4] @ MDCAS0 \n\ - str %6, [%1, #8] @ MDCAS1 \n\ - str %7, [%1, #12] @ MDCAS2 \n\ - str %8, [%2, #0] @ PPCR \n\ - ldr %0, [%1, #0] \n\ - b 3f \n\ -2: b 1b \n\ -3: nop \n\ - nop" - : "=&r" (unused) - : "r" (&MDCNFG), "r" (&PPCR), "0" (sd.mdcnfg), - "r" (sd.mdrefr), "r" (sd.mdcas[0]), - "r" (sd.mdcas[1]), "r" (sd.mdcas[2]), "r" (ppcr)); - local_irq_restore(flags); - - /* - * Now, return the SDRAM refresh back to normal. - */ - sdram_update_refresh(freqs.new, sdram); - - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - return 0; -} - -static int __init sa1110_cpu_init(struct cpufreq_policy *policy) -{ - if (policy->cpu != 0) - return -EINVAL; - policy->cur = policy->min = policy->max = sa11x0_getspeed(0); - policy->cpuinfo.min_freq = 59000; - policy->cpuinfo.max_freq = 287000; - policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; - return 0; -} - -/* sa1110_driver needs __refdata because it must remain after init registers - * it with cpufreq_register_driver() */ -static struct cpufreq_driver sa1110_driver __refdata = { - .flags = CPUFREQ_STICKY, - .verify = sa11x0_verify_speed, - .target = sa1110_target, - .get = sa11x0_getspeed, - .init = sa1110_cpu_init, - .name = "sa1110", -}; - -static struct sdram_params *sa1110_find_sdram(const char *name) -{ - struct sdram_params *sdram; - - for (sdram = sdram_tbl; sdram < sdram_tbl + ARRAY_SIZE(sdram_tbl); - sdram++) - if (strcmp(name, sdram->name) == 0) - return sdram; - - return NULL; -} - -static char sdram_name[16]; - -static int __init sa1110_clk_init(void) -{ - struct sdram_params *sdram; - const char *name = sdram_name; - - if (!cpu_is_sa1110()) - return -ENODEV; - - if (!name[0]) { - if (machine_is_assabet()) - name = "TC59SM716-CL3"; - if (machine_is_pt_system3()) - name = "K4S641632D"; - if (machine_is_h3100()) - name = "KM416S4030CT"; - if (machine_is_jornada720()) - name = "K4S281632B-1H"; - if (machine_is_nanoengine()) - name = "MT48LC8M16A2TG-75"; - } - - sdram = sa1110_find_sdram(name); - if (sdram) { - printk(KERN_DEBUG "SDRAM: tck: %d trcd: %d trp: %d" - " twr: %d refresh: %d cas_latency: %d\n", - sdram->tck, sdram->trcd, sdram->trp, - sdram->twr, sdram->refresh, sdram->cas_latency); - - memcpy(&sdram_params, sdram, sizeof(sdram_params)); - - return cpufreq_register_driver(&sa1110_driver); - } - - return 0; -} - -module_param_string(sdram, sdram_name, sizeof(sdram_name), 0); -arch_initcall(sa1110_clk_init); diff --git a/arch/arm/mach-sa1100/include/mach/generic.h b/arch/arm/mach-sa1100/include/mach/generic.h new file mode 100644 index 000000000000..665542e0c9e2 --- /dev/null +++ b/arch/arm/mach-sa1100/include/mach/generic.h @@ -0,0 +1 @@ +#include "../../generic.h" diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c index b63dec848195..153555724988 100644 --- a/arch/arm/mach-shark/core.c +++ b/arch/arm/mach-shark/core.c @@ -10,6 +10,7 @@ #include <linux/sched.h> #include <linux/serial_8250.h> #include <linux/io.h> +#include <linux/cpu.h> #include <asm/setup.h> #include <asm/mach-types.h> @@ -130,7 +131,7 @@ static void __init shark_timer_init(void) static void shark_init_early(void) { - disable_hlt(); + cpu_idle_poll_ctrl(true); } MACHINE_START(SHARK, "Shark") diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 9255546e7bf6..1a517e2fe449 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -16,12 +16,30 @@ config ARCH_SH73A0 select CPU_V7 select I2C select SH_CLK_CPG + select RENESAS_INTC_IRQPIN + +config ARCH_R8A73A4 + bool "R-Mobile APE6 (R8A73A40)" + select ARCH_WANT_OPTIONAL_GPIOLIB + select ARM_GIC + select CPU_V7 + select ARM_ARCH_TIMER + select SH_CLK_CPG + select RENESAS_IRQC config ARCH_R8A7740 bool "R-Mobile A1 (R8A77400)" select ARCH_WANT_OPTIONAL_GPIOLIB + select ARM_GIC select CPU_V7 select SH_CLK_CPG + select RENESAS_INTC_IRQPIN + +config ARCH_R8A7778 + bool "R-Car M1 (R8A77780)" + select CPU_V7 + select SH_CLK_CPG + select ARM_GIC config ARCH_R8A7779 bool "R-Car H1 (R8A77790)" @@ -31,6 +49,16 @@ config ARCH_R8A7779 select SH_CLK_CPG select USB_ARCH_HAS_EHCI select USB_ARCH_HAS_OHCI + select RENESAS_INTC_IRQPIN + +config ARCH_R8A7790 + bool "R-Car H2 (R8A77900)" + select ARCH_WANT_OPTIONAL_GPIOLIB + select ARM_GIC + select CPU_V7 + select ARM_ARCH_TIMER + select SH_CLK_CPG + select RENESAS_IRQC config ARCH_EMEV2 bool "Emma Mobile EV2" @@ -68,6 +96,11 @@ config MACH_AG5EVM select REGULATOR_FIXED_VOLTAGE if REGULATOR select SH_LCD_MIPI_DSI +config MACH_APE6EVM + bool "APE6EVM board" + depends on ARCH_R8A73A4 + select USE_OF + config MACH_MACKEREL bool "mackerel board" depends on ARCH_SH7372 @@ -96,12 +129,37 @@ config MACH_ARMADILLO800EVA select SND_SOC_WM8978 if SND_SIMPLE_CARD select USE_OF +config MACH_BOCKW + bool "BOCK-W platform" + depends on ARCH_R8A7778 + select ARCH_REQUIRE_GPIOLIB + select RENESAS_INTC_IRQPIN + select USE_OF + config MACH_MARZEN bool "MARZEN board" depends on ARCH_R8A7779 select ARCH_REQUIRE_GPIOLIB select REGULATOR_FIXED_VOLTAGE if REGULATOR +config MACH_MARZEN_REFERENCE + bool "MARZEN board - Reference Device Tree Implementation" + depends on ARCH_R8A7779 + select ARCH_REQUIRE_GPIOLIB + select REGULATOR_FIXED_VOLTAGE if REGULATOR + select USE_OF + ---help--- + Use reference implementation of Marzen board support + which makes use of device tree at the expense + of not supporting a number of devices. + + This is intended to aid developers + +config MACH_LAGER + bool "Lager board" + depends on ARCH_R8A7790 + select USE_OF + config MACH_KZM9D bool "KZM9D board" depends on ARCH_EMEV2 @@ -116,6 +174,20 @@ config MACH_KZM9G select SND_SOC_AK4642 if SND_SIMPLE_CARD select USE_OF +config MACH_KZM9G_REFERENCE + bool "KZM-A9-GT board - Reference Device Tree Implementation" + depends on ARCH_SH73A0 + select ARCH_REQUIRE_GPIOLIB + select REGULATOR_FIXED_VOLTAGE if REGULATOR + select SND_SOC_AK4642 if SND_SIMPLE_CARD + select USE_OF + ---help--- + Use reference implementation of KZM-A9-GT board support + which makes as greater use of device tree at the expense + of not supporting a number of devices. + + This is intended to aid developers + comment "SH-Mobile System Configuration" config CPU_HAS_INTEVT @@ -128,7 +200,8 @@ config MEMORY_START hex "Physical memory start address" default "0x40000000" if MACH_AP4EVB || MACH_AG5EVM || \ MACH_MACKEREL || MACH_BONITO || \ - MACH_ARMADILLO800EVA + MACH_ARMADILLO800EVA || MACH_APE6EVM || \ + MACH_LAGER default "0x41000000" if MACH_KOTA2 default "0x00000000" ---help--- @@ -138,6 +211,8 @@ config MEMORY_START config MEMORY_SIZE hex "Physical memory size" + default "0x80000000" if MACH_LAGER + default "0x40000000" if MACH_APE6EVM default "0x20000000" if MACH_AG5EVM || MACH_BONITO || \ MACH_ARMADILLO800EVA default "0x1e000000" if MACH_KOTA2 diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index e1fac57514b9..068f1dadc46b 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -8,16 +8,18 @@ obj-y := timer.o console.o clock.o # CPU objects obj-$(CONFIG_ARCH_SH7372) += setup-sh7372.o clock-sh7372.o intc-sh7372.o obj-$(CONFIG_ARCH_SH73A0) += setup-sh73a0.o clock-sh73a0.o intc-sh73a0.o +obj-$(CONFIG_ARCH_R8A73A4) += setup-r8a73a4.o clock-r8a73a4.o obj-$(CONFIG_ARCH_R8A7740) += setup-r8a7740.o clock-r8a7740.o intc-r8a7740.o +obj-$(CONFIG_ARCH_R8A7778) += setup-r8a7778.o clock-r8a7778.o obj-$(CONFIG_ARCH_R8A7779) += setup-r8a7779.o clock-r8a7779.o intc-r8a7779.o +obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o clock-r8a7790.o obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o clock-emev2.o # SMP objects smp-y := platsmp.o headsmp.o -smp-$(CONFIG_HOTPLUG_CPU) += hotplug.o -smp-$(CONFIG_ARCH_SH73A0) += smp-sh73a0.o headsmp-sh73a0.o -smp-$(CONFIG_ARCH_R8A7779) += smp-r8a7779.o -smp-$(CONFIG_ARCH_EMEV2) += smp-emev2.o +smp-$(CONFIG_ARCH_SH73A0) += smp-sh73a0.o headsmp-scu.o +smp-$(CONFIG_ARCH_R8A7779) += smp-r8a7779.o headsmp-scu.o +smp-$(CONFIG_ARCH_EMEV2) += smp-emev2.o headsmp-scu.o # IRQ objects obj-$(CONFIG_ARCH_SH7372) += entry-intc.o @@ -35,13 +37,18 @@ obj-$(CONFIG_ARCH_SH73A0) += pm-sh73a0.o # Board objects obj-$(CONFIG_MACH_AP4EVB) += board-ap4evb.o obj-$(CONFIG_MACH_AG5EVM) += board-ag5evm.o +obj-$(CONFIG_MACH_APE6EVM) += board-ape6evm.o obj-$(CONFIG_MACH_MACKEREL) += board-mackerel.o obj-$(CONFIG_MACH_KOTA2) += board-kota2.o obj-$(CONFIG_MACH_BONITO) += board-bonito.o +obj-$(CONFIG_MACH_BOCKW) += board-bockw.o obj-$(CONFIG_MACH_MARZEN) += board-marzen.o +obj-$(CONFIG_MACH_MARZEN_REFERENCE) += board-marzen-reference.o +obj-$(CONFIG_MACH_LAGER) += board-lager.o obj-$(CONFIG_MACH_ARMADILLO800EVA) += board-armadillo800eva.o obj-$(CONFIG_MACH_KZM9D) += board-kzm9d.o obj-$(CONFIG_MACH_KZM9G) += board-kzm9g.o +obj-$(CONFIG_MACH_KZM9G_REFERENCE) += board-kzm9g-reference.o # Framework support obj-$(CONFIG_SMP) += $(smp-y) diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index 8ff53a19c48c..c7540710906f 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -23,6 +23,8 @@ #include <linux/init.h> #include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/pinctrl/machine.h> +#include <linux/pinctrl/pinconf-generic.h> #include <linux/platform_device.h> #include <linux/delay.h> #include <linux/io.h> @@ -304,9 +306,9 @@ static int lcd_backlight_set_brightness(int brightness) if (brightness == 0) { /* Reset the chip */ - gpio_set_value(GPIO_PORT235, 0); + gpio_set_value(235, 0); mdelay(24); - gpio_set_value(GPIO_PORT235, 1); + gpio_set_value(235, 1); return 0; } @@ -406,7 +408,7 @@ static struct sh_mobile_sdhi_info sdhi0_info = { .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD, .tmio_caps = MMC_CAP_SD_HIGHSPEED, .tmio_ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29, - .cd_gpio = GPIO_PORT251, + .cd_gpio = 251, }; static struct resource sdhi0_resources[] = { @@ -461,7 +463,7 @@ static struct regulator_init_data cn4_power_init_data = { static struct fixed_voltage_config cn4_power_info = { .supply_name = "CN4 SD/MMC Vdd", .microvolts = 3300000, - .gpio = GPIO_PORT114, + .gpio = 114, .enable_high = 1, .init_data = &cn4_power_init_data, }; @@ -479,10 +481,10 @@ static void ag5evm_sdhi1_set_pwr(struct platform_device *pdev, int state) static int power_gpio = -EINVAL; if (power_gpio < 0) { - int ret = gpio_request_one(GPIO_PORT114, GPIOF_OUT_INIT_LOW, + int ret = gpio_request_one(114, GPIOF_OUT_INIT_LOW, "sdhi1_power"); if (!ret) - power_gpio = GPIO_PORT114; + power_gpio = 114; } /* @@ -493,7 +495,7 @@ static void ag5evm_sdhi1_set_pwr(struct platform_device *pdev, int state) * regulator driver. We have to live with the race in case the driver * gets unloaded and the GPIO freed between these two steps. */ - gpio_set_value(GPIO_PORT114, state); + gpio_set_value(114, state); } static struct sh_mobile_sdhi_info sh_sdhi1_info = { @@ -550,6 +552,77 @@ static struct platform_device *ag5evm_devices[] __initdata = { &sdhi1_device, }; +static unsigned long pin_pullup_conf[] = { + PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_UP, 0), +}; + +static const struct pinctrl_map ag5evm_pinctrl_map[] = { + /* FSIA */ + PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0", + "fsia_mclk_in", "fsia"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0", + "fsia_sclk_in", "fsia"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0", + "fsia_data_in", "fsia"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0", + "fsia_data_out", "fsia"), + /* I2C2 & I2C3 */ + PIN_MAP_MUX_GROUP_DEFAULT("i2c-sh_mobile.2", "pfc-sh73a0", + "i2c2_0", "i2c2"), + PIN_MAP_MUX_GROUP_DEFAULT("i2c-sh_mobile.3", "pfc-sh73a0", + "i2c3_0", "i2c3"), + /* IrDA */ + PIN_MAP_MUX_GROUP_DEFAULT("sh_irda.0", "pfc-sh73a0", + "irda_0", "irda"), + /* KEYSC */ + PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0", + "keysc_in8", "keysc"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0", + "keysc_out04", "keysc"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0", + "keysc_out5", "keysc"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0", + "keysc_out6_0", "keysc"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0", + "keysc_out7_0", "keysc"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0", + "keysc_out8_0", "keysc"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0", + "keysc_out9_2", "keysc"), + PIN_MAP_CONFIGS_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0", + "keysc_in8", pin_pullup_conf), + /* MMCIF */ + PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0", + "mmc0_data8_0", "mmc0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0", + "mmc0_ctrl_0", "mmc0"), + PIN_MAP_CONFIGS_PIN_DEFAULT("sh_mmcif.0", "pfc-sh73a0", + "PORT279", pin_pullup_conf), + PIN_MAP_CONFIGS_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0", + "mmc0_data8_0", pin_pullup_conf), + /* SCIFA2 */ + PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "pfc-sh73a0", + "scifa2_data_0", "scifa2"), + PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "pfc-sh73a0", + "scifa2_ctrl_0", "scifa2"), + /* SDHI0 (CN15 [SD I/F]) */ + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0", + "sdhi0_data4", "sdhi0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0", + "sdhi0_ctrl", "sdhi0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0", + "sdhi0_wp", "sdhi0"), + /* SDHI1 (CN4 [WLAN I/F]) */ + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh73a0", + "sdhi1_data4", "sdhi1"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh73a0", + "sdhi1_ctrl", "sdhi1"), + PIN_MAP_CONFIGS_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh73a0", + "sdhi1_data4", pin_pullup_conf), + PIN_MAP_CONFIGS_PIN_DEFAULT("sh_mobile_sdhi.1", "pfc-sh73a0", + "PORT263", pin_pullup_conf), +}; + static void __init ag5evm_init(void) { regulator_register_always_on(0, "fixed-1.8V", fixed1v8_power_consumers, @@ -558,96 +631,27 @@ static void __init ag5evm_init(void) ARRAY_SIZE(fixed2v8_power_consumers), 3300000); regulator_register_fixed(3, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + pinctrl_register_mappings(ag5evm_pinctrl_map, + ARRAY_SIZE(ag5evm_pinctrl_map)); sh73a0_pinmux_init(); - /* enable SCIFA2 */ - gpio_request(GPIO_FN_SCIFA2_TXD1, NULL); - gpio_request(GPIO_FN_SCIFA2_RXD1, NULL); - gpio_request(GPIO_FN_SCIFA2_RTS1_, NULL); - gpio_request(GPIO_FN_SCIFA2_CTS1_, NULL); - - /* enable KEYSC */ - gpio_request(GPIO_FN_KEYIN0_PU, NULL); - gpio_request(GPIO_FN_KEYIN1_PU, NULL); - gpio_request(GPIO_FN_KEYIN2_PU, NULL); - gpio_request(GPIO_FN_KEYIN3_PU, NULL); - gpio_request(GPIO_FN_KEYIN4_PU, NULL); - gpio_request(GPIO_FN_KEYIN5_PU, NULL); - gpio_request(GPIO_FN_KEYIN6_PU, NULL); - gpio_request(GPIO_FN_KEYIN7_PU, NULL); - gpio_request(GPIO_FN_KEYOUT0, NULL); - gpio_request(GPIO_FN_KEYOUT1, NULL); - gpio_request(GPIO_FN_KEYOUT2, NULL); - gpio_request(GPIO_FN_KEYOUT3, NULL); - gpio_request(GPIO_FN_KEYOUT4, NULL); - gpio_request(GPIO_FN_KEYOUT5, NULL); - gpio_request(GPIO_FN_PORT59_KEYOUT6, NULL); - gpio_request(GPIO_FN_PORT58_KEYOUT7, NULL); - gpio_request(GPIO_FN_KEYOUT8, NULL); - gpio_request(GPIO_FN_PORT149_KEYOUT9, NULL); - - /* enable I2C channel 2 and 3 */ - gpio_request(GPIO_FN_PORT236_I2C_SDA2, NULL); - gpio_request(GPIO_FN_PORT237_I2C_SCL2, NULL); - gpio_request(GPIO_FN_PORT248_I2C_SCL3, NULL); - gpio_request(GPIO_FN_PORT249_I2C_SDA3, NULL); - /* enable MMCIF */ - gpio_request(GPIO_FN_MMCCLK0, NULL); - gpio_request(GPIO_FN_MMCCMD0_PU, NULL); - gpio_request(GPIO_FN_MMCD0_0_PU, NULL); - gpio_request(GPIO_FN_MMCD0_1_PU, NULL); - gpio_request(GPIO_FN_MMCD0_2_PU, NULL); - gpio_request(GPIO_FN_MMCD0_3_PU, NULL); - gpio_request(GPIO_FN_MMCD0_4_PU, NULL); - gpio_request(GPIO_FN_MMCD0_5_PU, NULL); - gpio_request(GPIO_FN_MMCD0_6_PU, NULL); - gpio_request(GPIO_FN_MMCD0_7_PU, NULL); - gpio_request_one(GPIO_PORT208, GPIOF_OUT_INIT_HIGH, NULL); /* Reset */ + gpio_request_one(208, GPIOF_OUT_INIT_HIGH, NULL); /* Reset */ /* enable SMSC911X */ - gpio_request_one(GPIO_PORT144, GPIOF_IN, NULL); /* PINTA2 */ - gpio_request_one(GPIO_PORT145, GPIOF_OUT_INIT_HIGH, NULL); /* RESET */ - - /* FSI A */ - gpio_request(GPIO_FN_FSIACK, NULL); - gpio_request(GPIO_FN_FSIAILR, NULL); - gpio_request(GPIO_FN_FSIAIBT, NULL); - gpio_request(GPIO_FN_FSIAISLD, NULL); - gpio_request(GPIO_FN_FSIAOSLD, NULL); - - /* IrDA */ - gpio_request(GPIO_FN_PORT241_IRDA_OUT, NULL); - gpio_request(GPIO_FN_PORT242_IRDA_IN, NULL); - gpio_request(GPIO_FN_PORT243_IRDA_FIRSEL, NULL); + gpio_request_one(144, GPIOF_IN, NULL); /* PINTA2 */ + gpio_request_one(145, GPIOF_OUT_INIT_HIGH, NULL); /* RESET */ /* LCD panel */ - gpio_request_one(GPIO_PORT217, GPIOF_OUT_INIT_LOW, NULL); /* RESET */ + gpio_request_one(217, GPIOF_OUT_INIT_LOW, NULL); /* RESET */ mdelay(1); - gpio_set_value(GPIO_PORT217, 1); + gpio_set_value(217, 1); mdelay(100); /* LCD backlight controller */ - gpio_request_one(GPIO_PORT235, GPIOF_OUT_INIT_LOW, NULL); /* RESET */ + gpio_request_one(235, GPIOF_OUT_INIT_LOW, NULL); /* RESET */ lcd_backlight_set_brightness(0); - /* enable SDHI0 on CN15 [SD I/F] */ - gpio_request(GPIO_FN_SDHIWP0, NULL); - gpio_request(GPIO_FN_SDHICMD0, NULL); - gpio_request(GPIO_FN_SDHICLK0, NULL); - gpio_request(GPIO_FN_SDHID0_3, NULL); - gpio_request(GPIO_FN_SDHID0_2, NULL); - gpio_request(GPIO_FN_SDHID0_1, NULL); - gpio_request(GPIO_FN_SDHID0_0, NULL); - - /* enable SDHI1 on CN4 [WLAN I/F] */ - gpio_request(GPIO_FN_SDHICLK1, NULL); - gpio_request(GPIO_FN_SDHICMD1_PU, NULL); - gpio_request(GPIO_FN_SDHID1_3_PU, NULL); - gpio_request(GPIO_FN_SDHID1_2_PU, NULL); - gpio_request(GPIO_FN_SDHID1_1_PU, NULL); - gpio_request(GPIO_FN_SDHID1_0_PU, NULL); - #ifdef CONFIG_CACHE_L2X0 /* Shared attribute override enable, 64K*8way */ l2x0_init(IOMEM(0xf0100000), 0x00460000, 0xc2000fff); diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index 38f1259a0daf..45f78cadec1d 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -34,6 +34,7 @@ #include <linux/i2c.h> #include <linux/i2c/tsc2007.h> #include <linux/io.h> +#include <linux/pinctrl/machine.h> #include <linux/regulator/fixed.h> #include <linux/regulator/machine.h> #include <linux/smsc911x.h> @@ -273,11 +274,11 @@ static struct platform_device smc911x_device = { /* * The card detect pin of the top SD/MMC slot (CN7) is active low and is - * connected to GPIO A22 of SH7372 (GPIO_PORT41). + * connected to GPIO A22 of SH7372 (GPIO 41). */ static int slot_cn7_get_cd(struct platform_device *pdev) { - return !gpio_get_value(GPIO_PORT41); + return !gpio_get_value(41); } /* MERAM */ static struct sh_mobile_meram_info meram_info = { @@ -838,22 +839,22 @@ static struct platform_device fsi_hdmi_device = { static struct gpio_led ap4evb_leds[] = { { .name = "led4", - .gpio = GPIO_PORT185, + .gpio = 185, .default_state = LEDS_GPIO_DEFSTATE_ON, }, { .name = "led2", - .gpio = GPIO_PORT186, + .gpio = 186, .default_state = LEDS_GPIO_DEFSTATE_ON, }, { .name = "led3", - .gpio = GPIO_PORT187, + .gpio = 187, .default_state = LEDS_GPIO_DEFSTATE_ON, }, { .name = "led1", - .gpio = GPIO_PORT188, + .gpio = 188, .default_state = LEDS_GPIO_DEFSTATE_ON, } }; @@ -1026,10 +1027,10 @@ out: /* TouchScreen */ #ifdef CONFIG_AP4EVB_QHD # define GPIO_TSC_IRQ GPIO_FN_IRQ28_123 -# define GPIO_TSC_PORT GPIO_PORT123 +# define GPIO_TSC_PORT 123 #else /* WVGA */ # define GPIO_TSC_IRQ GPIO_FN_IRQ7_40 -# define GPIO_TSC_PORT GPIO_PORT40 +# define GPIO_TSC_PORT 40 #endif #define IRQ28 evt2irq(0x3380) /* IRQ28A */ @@ -1084,6 +1085,28 @@ static struct i2c_board_info i2c1_devices[] = { }; +static const struct pinctrl_map ap4evb_pinctrl_map[] = { + /* MMCIF */ + PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh7372", + "mmc0_data8_0", "mmc0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh7372", + "mmc0_ctrl_0", "mmc0"), + /* SDHI0 */ + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372", + "sdhi0_data4", "sdhi0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372", + "sdhi0_ctrl", "sdhi0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372", + "sdhi0_cd", "sdhi0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372", + "sdhi0_wp", "sdhi0"), + /* SDHI1 */ + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh7372", + "sdhi1_data4", "sdhi1"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh7372", + "sdhi1_ctrl", "sdhi1"), +}; + #define GPIO_PORT9CR IOMEM(0xE6051009) #define GPIO_PORT10CR IOMEM(0xE605100A) #define USCCR1 IOMEM(0xE6058144) @@ -1110,6 +1133,8 @@ static void __init ap4evb_init(void) /* External clock source */ clk_set_rate(&sh7372_dv_clki_clk, 27000000); + pinctrl_register_mappings(ap4evb_pinctrl_map, + ARRAY_SIZE(ap4evb_pinctrl_map)); sh7372_pinmux_init(); /* enable SCIFA0 */ @@ -1121,40 +1146,10 @@ static void __init ap4evb_init(void) gpio_request(GPIO_FN_IRQ6_39, NULL); /* enable Debug switch (S6) */ - gpio_request_one(GPIO_PORT32, GPIOF_IN | GPIOF_EXPORT, NULL); - gpio_request_one(GPIO_PORT33, GPIOF_IN | GPIOF_EXPORT, NULL); - gpio_request_one(GPIO_PORT34, GPIOF_IN | GPIOF_EXPORT, NULL); - gpio_request_one(GPIO_PORT35, GPIOF_IN | GPIOF_EXPORT, NULL); - - /* SDHI0 */ - gpio_request(GPIO_FN_SDHICD0, NULL); - gpio_request(GPIO_FN_SDHIWP0, NULL); - gpio_request(GPIO_FN_SDHICMD0, NULL); - gpio_request(GPIO_FN_SDHICLK0, NULL); - gpio_request(GPIO_FN_SDHID0_3, NULL); - gpio_request(GPIO_FN_SDHID0_2, NULL); - gpio_request(GPIO_FN_SDHID0_1, NULL); - gpio_request(GPIO_FN_SDHID0_0, NULL); - - /* SDHI1 */ - gpio_request(GPIO_FN_SDHICMD1, NULL); - gpio_request(GPIO_FN_SDHICLK1, NULL); - gpio_request(GPIO_FN_SDHID1_3, NULL); - gpio_request(GPIO_FN_SDHID1_2, NULL); - gpio_request(GPIO_FN_SDHID1_1, NULL); - gpio_request(GPIO_FN_SDHID1_0, NULL); - - /* MMCIF */ - gpio_request(GPIO_FN_MMCD0_0, NULL); - gpio_request(GPIO_FN_MMCD0_1, NULL); - gpio_request(GPIO_FN_MMCD0_2, NULL); - gpio_request(GPIO_FN_MMCD0_3, NULL); - gpio_request(GPIO_FN_MMCD0_4, NULL); - gpio_request(GPIO_FN_MMCD0_5, NULL); - gpio_request(GPIO_FN_MMCD0_6, NULL); - gpio_request(GPIO_FN_MMCD0_7, NULL); - gpio_request(GPIO_FN_MMCCMD0, NULL); - gpio_request(GPIO_FN_MMCCLK0, NULL); + gpio_request_one(32, GPIOF_IN | GPIOF_EXPORT, NULL); + gpio_request_one(33, GPIOF_IN | GPIOF_EXPORT, NULL); + gpio_request_one(34, GPIOF_IN | GPIOF_EXPORT, NULL); + gpio_request_one(35, GPIOF_IN | GPIOF_EXPORT, NULL); /* USB enable */ gpio_request(GPIO_FN_VBUS0_1, NULL); @@ -1172,15 +1167,15 @@ static void __init ap4evb_init(void) gpio_request(GPIO_FN_FSIAILR, NULL); gpio_request(GPIO_FN_FSIAISLD, NULL); gpio_request(GPIO_FN_FSIAOSLD, NULL); - gpio_request_one(GPIO_PORT161, GPIOF_OUT_INIT_LOW, NULL); /* slave */ + gpio_request_one(161, GPIOF_OUT_INIT_LOW, NULL); /* slave */ - gpio_request(GPIO_PORT9, NULL); - gpio_request(GPIO_PORT10, NULL); + gpio_request(9, NULL); + gpio_request(10, NULL); gpio_direction_none(GPIO_PORT9CR); /* FSIAOBT needs no direction */ gpio_direction_none(GPIO_PORT10CR); /* FSIAOLR needs no direction */ /* card detect pin for MMC slot (CN7) */ - gpio_request_one(GPIO_PORT41, GPIOF_IN, NULL); + gpio_request_one(41, GPIOF_IN, NULL); /* setup FSI2 port B (HDMI) */ gpio_request(GPIO_FN_FSIBCK, NULL); @@ -1268,8 +1263,8 @@ static void __init ap4evb_init(void) gpio_request(GPIO_FN_LCDDISP, NULL); gpio_request(GPIO_FN_LCDDCK, NULL); - gpio_request_one(GPIO_PORT189, GPIOF_OUT_INIT_HIGH, NULL); /* backlight */ - gpio_request_one(GPIO_PORT151, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */ + gpio_request_one(189, GPIOF_OUT_INIT_HIGH, NULL); /* backlight */ + gpio_request_one(151, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */ lcdc_info.clock_source = LCDC_CLK_BUS; lcdc_info.ch[0].interface_type = RGB18; diff --git a/arch/arm/mach-shmobile/board-ape6evm.c b/arch/arm/mach-shmobile/board-ape6evm.c new file mode 100644 index 000000000000..55b8c9fef954 --- /dev/null +++ b/arch/arm/mach-shmobile/board-ape6evm.c @@ -0,0 +1,94 @@ +/* + * APE6EVM board support + * + * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/gpio.h> +#include <linux/interrupt.h> +#include <linux/irqchip.h> +#include <linux/kernel.h> +#include <linux/pinctrl/machine.h> +#include <linux/platform_device.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> +#include <linux/smsc911x.h> +#include <mach/common.h> +#include <mach/irqs.h> +#include <mach/r8a73a4.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x"), + REGULATOR_SUPPLY("vdd33a", "smsc911x"), +}; + +/* SMSC LAN9220 */ +static const struct resource lan9220_res[] = { + DEFINE_RES_MEM(0x08000000, 0x1000), + { + .start = irq_pin(40), /* IRQ40 */ + .flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH, + }, +}; + +static const struct smsc911x_platform_config lan9220_data = { + .flags = SMSC911X_USE_32BIT, + .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH, +}; + +static const struct pinctrl_map ape6evm_pinctrl_map[] = { + /* SCIFA0 console */ + PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a73a4", + "scifa0_data", "scifa0"), + /* SMSC */ + PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-r8a73a4", + "irqc_irq40", "irqc"), +}; + +static void __init ape6evm_add_standard_devices(void) +{ + r8a73a4_clock_init(); + pinctrl_register_mappings(ape6evm_pinctrl_map, + ARRAY_SIZE(ape6evm_pinctrl_map)); + r8a73a4_pinmux_init(); + r8a73a4_add_standard_devices(); + + /* LAN9220 ethernet */ + gpio_request_one(270, GPIOF_OUT_INIT_HIGH, NULL); /* smsc9220 RESET */ + + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + + platform_device_register_resndata(&platform_bus, "smsc911x", -1, + lan9220_res, ARRAY_SIZE(lan9220_res), + &lan9220_data, sizeof(lan9220_data)); +} + +static const char *ape6evm_boards_compat_dt[] __initdata = { + "renesas,ape6evm", + NULL, +}; + +DT_MACHINE_START(APE6EVM_DT, "ape6evm") + .init_irq = irqchip_init, + .init_time = shmobile_timer_init, + .init_machine = ape6evm_add_standard_devices, + .dt_compat = ape6evm_boards_compat_dt, +MACHINE_END diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index f2ec0777cfbe..b85b2882dbd0 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -24,11 +24,15 @@ #include <linux/err.h> #include <linux/kernel.h> #include <linux/input.h> +#include <linux/platform_data/st1232_pdata.h> #include <linux/irq.h> #include <linux/platform_device.h> #include <linux/gpio.h> #include <linux/gpio_keys.h> +#include <linux/regulator/driver.h> +#include <linux/pinctrl/machine.h> #include <linux/regulator/fixed.h> +#include <linux/regulator/gpio-regulator.h> #include <linux/regulator/machine.h> #include <linux/sh_eth.h> #include <linux/videodev2.h> @@ -145,7 +149,7 @@ * see * usbhsf_power_ctrl() */ -#define IRQ7 evt2irq(0x02e0) +#define IRQ7 irq_pin(7) #define USBCR1 IOMEM(0xe605810a) #define USBH 0xC6700000 #define USBH_USBCTR 0x10834 @@ -169,7 +173,7 @@ static int usbhsf_get_id(struct platform_device *pdev) return USBHS_GADGET; } -static void usbhsf_power_ctrl(struct platform_device *pdev, +static int usbhsf_power_ctrl(struct platform_device *pdev, void __iomem *base, int enable) { struct usbhsf_private *priv = usbhsf_get_priv(pdev); @@ -223,11 +227,13 @@ static void usbhsf_power_ctrl(struct platform_device *pdev, clk_disable(priv->pci); /* usb work around */ clk_disable(priv->usb24); /* usb work around */ } + + return 0; } static int usbhsf_get_vbus(struct platform_device *pdev) { - return gpio_get_value(GPIO_PORT209); + return gpio_get_value(209); } static irqreturn_t usbhsf_interrupt(int irq, void *data) @@ -239,7 +245,7 @@ static irqreturn_t usbhsf_interrupt(int irq, void *data) return IRQ_HANDLED; } -static void usbhsf_hardware_exit(struct platform_device *pdev) +static int usbhsf_hardware_exit(struct platform_device *pdev) { struct usbhsf_private *priv = usbhsf_get_priv(pdev); @@ -264,6 +270,8 @@ static void usbhsf_hardware_exit(struct platform_device *pdev) priv->usbh_base = NULL; free_irq(IRQ7, pdev); + + return 0; } static int usbhsf_hardware_init(struct platform_device *pdev) @@ -330,7 +338,7 @@ static struct resource usbhsf_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = evt2irq(0x0A20), + .start = gic_spi(51), .flags = IORESOURCE_IRQ, }, }; @@ -363,7 +371,7 @@ static struct resource sh_eth_resources[] = { .end = 0xe9a02000 - 1, .flags = IORESOURCE_MEM, }, { - .start = evt2irq(0x0500), + .start = gic_spi(110), .flags = IORESOURCE_IRQ, }, }; @@ -417,7 +425,7 @@ static struct resource lcdc0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = intcs_evt2irq(0x580), + .start = gic_spi(177), .flags = IORESOURCE_IRQ, }, }; @@ -452,7 +460,7 @@ static struct resource hdmi_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = evt2irq(0x1700), + .start = gic_spi(131), .flags = IORESOURCE_IRQ, }, [2] = { @@ -514,7 +522,7 @@ static struct resource hdmi_lcdc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = intcs_evt2irq(0x1780), + .start = gic_spi(178), .flags = IORESOURCE_IRQ, }, }; @@ -535,10 +543,10 @@ static struct platform_device hdmi_lcdc_device = { { .code = c, .gpio = g, .desc = d, .active_low = 1, __VA_ARGS__ } static struct gpio_keys_button gpio_buttons[] = { - GPIO_KEY(KEY_POWER, GPIO_PORT99, "SW3", .wakeup = 1), - GPIO_KEY(KEY_BACK, GPIO_PORT100, "SW4"), - GPIO_KEY(KEY_MENU, GPIO_PORT97, "SW5"), - GPIO_KEY(KEY_HOME, GPIO_PORT98, "SW6"), + GPIO_KEY(KEY_POWER, 99, "SW3", .wakeup = 1), + GPIO_KEY(KEY_BACK, 100, "SW4"), + GPIO_KEY(KEY_MENU, 97, "SW5"), + GPIO_KEY(KEY_HOME, 98, "SW6"), }; static struct gpio_keys_platform_data gpio_key_info = { @@ -554,15 +562,119 @@ static struct platform_device gpio_keys_device = { }, }; -/* Fixed 3.3V regulator to be used by SDHI0, SDHI1, MMCIF */ -static struct regulator_consumer_supply fixed3v3_power_consumers[] = -{ +/* Fixed 3.3V regulator to be used by SDHI1, MMCIF */ +static struct regulator_consumer_supply fixed3v3_power_consumers[] = { + REGULATOR_SUPPLY("vmmc", "sh_mmcif"), + REGULATOR_SUPPLY("vqmmc", "sh_mmcif"), +}; + +/* Fixed 3.3V regulator to be used by SDHI0 */ +static struct regulator_consumer_supply vcc_sdhi0_consumers[] = { REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), +}; + +static struct regulator_init_data vcc_sdhi0_init_data = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(vcc_sdhi0_consumers), + .consumer_supplies = vcc_sdhi0_consumers, +}; + +static struct fixed_voltage_config vcc_sdhi0_info = { + .supply_name = "SDHI0 Vcc", + .microvolts = 3300000, + .gpio = GPIO_PORT75, + .enable_high = 1, + .init_data = &vcc_sdhi0_init_data, +}; + +static struct platform_device vcc_sdhi0 = { + .name = "reg-fixed-voltage", + .id = 1, + .dev = { + .platform_data = &vcc_sdhi0_info, + }, +}; + +/* 1.8 / 3.3V SDHI0 VccQ regulator */ +static struct regulator_consumer_supply vccq_sdhi0_consumers[] = { REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), +}; + +static struct regulator_init_data vccq_sdhi0_init_data = { + .constraints = { + .input_uV = 3300000, + .min_uV = 1800000, + .max_uV = 3300000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(vccq_sdhi0_consumers), + .consumer_supplies = vccq_sdhi0_consumers, +}; + +static struct gpio vccq_sdhi0_gpios[] = { + {GPIO_PORT17, GPIOF_OUT_INIT_LOW, "vccq-sdhi0" }, +}; + +static struct gpio_regulator_state vccq_sdhi0_states[] = { + { .value = 3300000, .gpios = (0 << 0) }, + { .value = 1800000, .gpios = (1 << 0) }, +}; + +static struct gpio_regulator_config vccq_sdhi0_info = { + .supply_name = "vqmmc", + + .enable_gpio = GPIO_PORT74, + .enable_high = 1, + .enabled_at_boot = 0, + + .gpios = vccq_sdhi0_gpios, + .nr_gpios = ARRAY_SIZE(vccq_sdhi0_gpios), + + .states = vccq_sdhi0_states, + .nr_states = ARRAY_SIZE(vccq_sdhi0_states), + + .type = REGULATOR_VOLTAGE, + .init_data = &vccq_sdhi0_init_data, +}; + +static struct platform_device vccq_sdhi0 = { + .name = "gpio-regulator", + .id = -1, + .dev = { + .platform_data = &vccq_sdhi0_info, + }, +}; + +/* Fixed 3.3V regulator to be used by SDHI1 */ +static struct regulator_consumer_supply vcc_sdhi1_consumers[] = { REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"), - REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"), - REGULATOR_SUPPLY("vmmc", "sh_mmcif"), - REGULATOR_SUPPLY("vqmmc", "sh_mmcif"), +}; + +static struct regulator_init_data vcc_sdhi1_init_data = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(vcc_sdhi1_consumers), + .consumer_supplies = vcc_sdhi1_consumers, +}; + +static struct fixed_voltage_config vcc_sdhi1_info = { + .supply_name = "SDHI1 Vcc", + .microvolts = 3300000, + .gpio = GPIO_PORT16, + .enable_high = 1, + .init_data = &vcc_sdhi1_init_data, +}; + +static struct platform_device vcc_sdhi1 = { + .name = "reg-fixed-voltage", + .id = 2, + .dev = { + .platform_data = &vcc_sdhi1_info, + }, }; /* SDHI0 */ @@ -574,14 +686,14 @@ static struct regulator_consumer_supply fixed3v3_power_consumers[] = * We can use IRQ31 as card detect irq, * but it needs chattering removal operation */ -#define IRQ31 evt2irq(0x33E0) +#define IRQ31 irq_pin(31) static struct sh_mobile_sdhi_info sdhi0_info = { .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, - .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |\ - MMC_CAP_NEEDS_POLL, - .tmio_ocr_mask = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, - .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT, + .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ | + MMC_CAP_POWER_OFF_CARD, + .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD, + .cd_gpio = GPIO_PORT167, }; static struct resource sdhi0_resources[] = { @@ -596,12 +708,12 @@ static struct resource sdhi0_resources[] = { */ { .name = SH_MOBILE_SDHI_IRQ_SDCARD, - .start = evt2irq(0x0E20), + .start = gic_spi(118), .flags = IORESOURCE_IRQ, }, { .name = SH_MOBILE_SDHI_IRQ_SDIO, - .start = evt2irq(0x0E40), + .start = gic_spi(119), .flags = IORESOURCE_IRQ, }, }; @@ -620,9 +732,11 @@ static struct platform_device sdhi0_device = { static struct sh_mobile_sdhi_info sdhi1_info = { .dma_slave_tx = SHDMA_SLAVE_SDHI1_TX, .dma_slave_rx = SHDMA_SLAVE_SDHI1_RX, - .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ, - .tmio_ocr_mask = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, - .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT, + .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ | + MMC_CAP_POWER_OFF_CARD, + .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD, + /* Port72 cannot generate IRQs, will be used in polling mode. */ + .cd_gpio = GPIO_PORT72, }; static struct resource sdhi1_resources[] = { @@ -633,15 +747,15 @@ static struct resource sdhi1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = evt2irq(0x0E80), + .start = gic_spi(121), .flags = IORESOURCE_IRQ, }, [2] = { - .start = evt2irq(0x0EA0), + .start = gic_spi(122), .flags = IORESOURCE_IRQ, }, [3] = { - .start = evt2irq(0x0EC0), + .start = gic_spi(123), .flags = IORESOURCE_IRQ, }, }; @@ -656,10 +770,20 @@ static struct platform_device sdhi1_device = { .resource = sdhi1_resources, }; +static const struct pinctrl_map eva_sdhi1_pinctrl_map[] = { + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7740", + "sdhi1_data4", "sdhi1"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7740", + "sdhi1_ctrl", "sdhi1"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7740", + "sdhi1_cd", "sdhi1"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7740", + "sdhi1_wp", "sdhi1"), +}; + /* MMCIF */ static struct sh_mmcif_plat_data sh_mmcif_plat = { .sup_pclk = 0, - .ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE, @@ -674,12 +798,12 @@ static struct resource sh_mmcif_resources[] = { }, [1] = { /* MMC ERR */ - .start = evt2irq(0x1AC0), + .start = gic_spi(56), .flags = IORESOURCE_IRQ, }, [2] = { /* MMC NOR */ - .start = evt2irq(0x1AE0), + .start = gic_spi(57), .flags = IORESOURCE_IRQ, }, }; @@ -708,9 +832,9 @@ static int mt9t111_power(struct device *dev, int mode) /* video1 (= CON1 camera) expect 24MHz */ clk_set_rate(mclk, clk_round_rate(mclk, 24000000)); clk_enable(mclk); - gpio_set_value(GPIO_PORT158, 1); + gpio_set_value(158, 1); } else { - gpio_set_value(GPIO_PORT158, 0); + gpio_set_value(158, 0); clk_disable(mclk); } @@ -756,7 +880,7 @@ static struct resource ceu0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = intcs_evt2irq(0x0500), + .start = gic_spi(160), .flags = IORESOURCE_IRQ, }, [2] = { @@ -798,7 +922,7 @@ static struct resource fsi_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = evt2irq(0x1840), + .start = gic_spi(9), .flags = IORESOURCE_IRQ, }, }; @@ -864,8 +988,8 @@ static struct platform_device fsi_hdmi_device = { /* RTC: RTC connects i2c-gpio. */ static struct i2c_gpio_platform_data i2c_gpio_data = { - .sda_pin = GPIO_PORT208, - .scl_pin = GPIO_PORT91, + .sda_pin = 208, + .scl_pin = 91, .udelay = 5, /* 100 kHz */ }; @@ -878,10 +1002,15 @@ static struct platform_device i2c_gpio_device = { }; /* I2C */ +static struct st1232_pdata st1232_i2c0_pdata = { + .reset_gpio = 166, +}; + static struct i2c_board_info i2c0_devices[] = { { I2C_BOARD_INFO("st1232-ts", 0x55), - .irq = evt2irq(0x0340), + .irq = irq_pin(10), + .platform_data = &st1232_i2c0_pdata, }, { I2C_BOARD_INFO("wm8978", 0x1a), @@ -902,6 +1031,8 @@ static struct platform_device *eva_devices[] __initdata = { &lcdc0_device, &gpio_keys_device, &sh_eth_device, + &vcc_sdhi0, + &vccq_sdhi0, &sdhi0_device, &sh_mmcif_device, &hdmi_device, @@ -914,6 +1045,28 @@ static struct platform_device *eva_devices[] __initdata = { &i2c_gpio_device, }; +static const struct pinctrl_map eva_pinctrl_map[] = { + /* LCD0 */ + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-r8a7740", + "lcd0_data24_0", "lcd0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-r8a7740", + "lcd0_lclk_1", "lcd0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-r8a7740", + "lcd0_sync", "lcd0"), + /* MMCIF */ + PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-r8a7740", + "mmc0_data8_1", "mmc0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-r8a7740", + "mmc0_ctrl_1", "mmc0"), + /* SDHI0 */ + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7740", + "sdhi0_data4", "sdhi0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7740", + "sdhi0_ctrl", "sdhi0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7740", + "sdhi0_wp", "sdhi0"), +}; + static void __init eva_clock_init(void) { struct clk *system = clk_get(NULL, "system_clk"); @@ -961,6 +1114,8 @@ static void __init eva_init(void) regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers, ARRAY_SIZE(fixed3v3_power_consumers), 3300000); + pinctrl_register_mappings(eva_pinctrl_map, ARRAY_SIZE(eva_pinctrl_map)); + r8a7740_pinmux_init(); r8a7740_meram_workaround(); @@ -970,42 +1125,12 @@ static void __init eva_init(void) /* LCDC0 */ gpio_request(GPIO_FN_LCDC0_SELECT, NULL); - gpio_request(GPIO_FN_LCD0_D0, NULL); - gpio_request(GPIO_FN_LCD0_D1, NULL); - gpio_request(GPIO_FN_LCD0_D2, NULL); - gpio_request(GPIO_FN_LCD0_D3, NULL); - gpio_request(GPIO_FN_LCD0_D4, NULL); - gpio_request(GPIO_FN_LCD0_D5, NULL); - gpio_request(GPIO_FN_LCD0_D6, NULL); - gpio_request(GPIO_FN_LCD0_D7, NULL); - gpio_request(GPIO_FN_LCD0_D8, NULL); - gpio_request(GPIO_FN_LCD0_D9, NULL); - gpio_request(GPIO_FN_LCD0_D10, NULL); - gpio_request(GPIO_FN_LCD0_D11, NULL); - gpio_request(GPIO_FN_LCD0_D12, NULL); - gpio_request(GPIO_FN_LCD0_D13, NULL); - gpio_request(GPIO_FN_LCD0_D14, NULL); - gpio_request(GPIO_FN_LCD0_D15, NULL); - gpio_request(GPIO_FN_LCD0_D16, NULL); - gpio_request(GPIO_FN_LCD0_D17, NULL); - gpio_request(GPIO_FN_LCD0_D18_PORT40, NULL); - gpio_request(GPIO_FN_LCD0_D19_PORT4, NULL); - gpio_request(GPIO_FN_LCD0_D20_PORT3, NULL); - gpio_request(GPIO_FN_LCD0_D21_PORT2, NULL); - gpio_request(GPIO_FN_LCD0_D22_PORT0, NULL); - gpio_request(GPIO_FN_LCD0_D23_PORT1, NULL); - gpio_request(GPIO_FN_LCD0_DCK, NULL); - gpio_request(GPIO_FN_LCD0_VSYN, NULL); - gpio_request(GPIO_FN_LCD0_HSYN, NULL); - gpio_request(GPIO_FN_LCD0_DISP, NULL); - gpio_request(GPIO_FN_LCD0_LCLK_PORT165, NULL); - - gpio_request_one(GPIO_PORT61, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */ - gpio_request_one(GPIO_PORT202, GPIOF_OUT_INIT_LOW, NULL); /* LCD0_LED_CONT */ + + gpio_request_one(61, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */ + gpio_request_one(202, GPIOF_OUT_INIT_LOW, NULL); /* LCD0_LED_CONT */ /* Touchscreen */ gpio_request(GPIO_FN_IRQ10, NULL); /* TP_INT */ - gpio_request_one(GPIO_PORT166, GPIOF_OUT_INIT_HIGH, NULL); /* TP_RST_B */ /* GETHER */ gpio_request(GPIO_FN_ET_CRS, NULL); @@ -1028,12 +1153,12 @@ static void __init eva_init(void) gpio_request(GPIO_FN_ET_RX_DV, NULL); gpio_request(GPIO_FN_ET_RX_CLK, NULL); - gpio_request_one(GPIO_PORT18, GPIOF_OUT_INIT_HIGH, NULL); /* PHY_RST */ + gpio_request_one(18, GPIOF_OUT_INIT_HIGH, NULL); /* PHY_RST */ /* USB */ - gpio_request_one(GPIO_PORT159, GPIOF_IN, NULL); /* USB_DEVICE_MODE */ + gpio_request_one(159, GPIOF_IN, NULL); /* USB_DEVICE_MODE */ - if (gpio_get_value(GPIO_PORT159)) { + if (gpio_get_value(159)) { /* USB Host */ } else { /* USB Func */ @@ -1042,47 +1167,15 @@ static void __init eva_init(void) * OTOH, usbhs interrupt needs its value (HI/LOW) to decide * USB connection/disconnection (usbhsf_get_vbus()). * This means we needs to select GPIO_FN_IRQ7_PORT209 first, - * and select GPIO_PORT209 here + * and select GPIO 209 here */ gpio_request(GPIO_FN_IRQ7_PORT209, NULL); - gpio_request_one(GPIO_PORT209, GPIOF_IN, NULL); + gpio_request_one(209, GPIOF_IN, NULL); platform_device_register(&usbhsf_device); usb = &usbhsf_device; } - /* SDHI0 */ - gpio_request(GPIO_FN_SDHI0_CMD, NULL); - gpio_request(GPIO_FN_SDHI0_CLK, NULL); - gpio_request(GPIO_FN_SDHI0_D0, NULL); - gpio_request(GPIO_FN_SDHI0_D1, NULL); - gpio_request(GPIO_FN_SDHI0_D2, NULL); - gpio_request(GPIO_FN_SDHI0_D3, NULL); - gpio_request(GPIO_FN_SDHI0_WP, NULL); - - gpio_request_one(GPIO_PORT17, GPIOF_OUT_INIT_LOW, NULL); /* SDHI0_18/33_B */ - gpio_request_one(GPIO_PORT74, GPIOF_OUT_INIT_HIGH, NULL); /* SDHI0_PON */ - gpio_request_one(GPIO_PORT75, GPIOF_OUT_INIT_HIGH, NULL); /* SDSLOT1_PON */ - - /* we can use GPIO_FN_IRQ31_PORT167 here for SDHI0 CD irq */ - - /* - * MMCIF - * - * Here doesn't care SW1.4 status, - * since CON2 is not mounted. - */ - gpio_request(GPIO_FN_MMC1_CLK_PORT103, NULL); - gpio_request(GPIO_FN_MMC1_CMD_PORT104, NULL); - gpio_request(GPIO_FN_MMC1_D0_PORT149, NULL); - gpio_request(GPIO_FN_MMC1_D1_PORT148, NULL); - gpio_request(GPIO_FN_MMC1_D2_PORT147, NULL); - gpio_request(GPIO_FN_MMC1_D3_PORT146, NULL); - gpio_request(GPIO_FN_MMC1_D4_PORT145, NULL); - gpio_request(GPIO_FN_MMC1_D5_PORT144, NULL); - gpio_request(GPIO_FN_MMC1_D6_PORT143, NULL); - gpio_request(GPIO_FN_MMC1_D7_PORT142, NULL); - /* CEU0 */ gpio_request(GPIO_FN_VIO0_D7, NULL); gpio_request(GPIO_FN_VIO0_D6, NULL); @@ -1099,10 +1192,10 @@ static void __init eva_init(void) gpio_request(GPIO_FN_VIO_CKO, NULL); /* CON1/CON15 Camera */ - gpio_request_one(GPIO_PORT173, GPIOF_OUT_INIT_LOW, NULL); /* STANDBY */ - gpio_request_one(GPIO_PORT172, GPIOF_OUT_INIT_HIGH, NULL); /* RST */ + gpio_request_one(173, GPIOF_OUT_INIT_LOW, NULL); /* STANDBY */ + gpio_request_one(172, GPIOF_OUT_INIT_HIGH, NULL); /* RST */ /* see mt9t111_power() */ - gpio_request_one(GPIO_PORT158, GPIOF_OUT_INIT_LOW, NULL); /* CAM_PON */ + gpio_request_one(158, GPIOF_OUT_INIT_LOW, NULL); /* CAM_PON */ /* FSI-WM8978 */ gpio_request(GPIO_FN_FSIAIBT, NULL); @@ -1111,8 +1204,8 @@ static void __init eva_init(void) gpio_request(GPIO_FN_FSIAOSLD, NULL); gpio_request(GPIO_FN_FSIAISLD_PORT5, NULL); - gpio_request(GPIO_PORT7, NULL); - gpio_request(GPIO_PORT8, NULL); + gpio_request(7, NULL); + gpio_request(8, NULL); gpio_direction_none(GPIO_PORT7CR); /* FSIAOBT needs no direction */ gpio_direction_none(GPIO_PORT8CR); /* FSIAOLR needs no direction */ @@ -1129,29 +1222,21 @@ static void __init eva_init(void) * DBGMD/LCDC0/FSIA MUX * DBGMD_SELECT_B should be set after setting PFC Function. */ - gpio_request_one(GPIO_PORT176, GPIOF_OUT_INIT_HIGH, NULL); + gpio_request_one(176, GPIOF_OUT_INIT_HIGH, NULL); /* * We can switch CON8/CON14 by SW1.5, * but it needs after DBGMD_SELECT_B */ - gpio_request_one(GPIO_PORT6, GPIOF_IN, NULL); - if (gpio_get_value(GPIO_PORT6)) { + gpio_request_one(6, GPIOF_IN, NULL); + if (gpio_get_value(6)) { /* CON14 enable */ } else { /* CON8 (SDHI1) enable */ - gpio_request(GPIO_FN_SDHI1_CLK, NULL); - gpio_request(GPIO_FN_SDHI1_CMD, NULL); - gpio_request(GPIO_FN_SDHI1_D0, NULL); - gpio_request(GPIO_FN_SDHI1_D1, NULL); - gpio_request(GPIO_FN_SDHI1_D2, NULL); - gpio_request(GPIO_FN_SDHI1_D3, NULL); - gpio_request(GPIO_FN_SDHI1_CD, NULL); - gpio_request(GPIO_FN_SDHI1_WP, NULL); - - /* SDSLOT2_PON */ - gpio_request_one(GPIO_PORT16, GPIOF_OUT_INIT_HIGH, NULL); + pinctrl_register_mappings(eva_sdhi1_pinctrl_map, + ARRAY_SIZE(eva_sdhi1_pinctrl_map)); + platform_device_register(&vcc_sdhi1); platform_device_register(&sdhi1_device); } @@ -1207,7 +1292,6 @@ DT_MACHINE_START(ARMADILLO800EVA_DT, "armadillo800eva") .map_io = r8a7740_map_io, .init_early = eva_add_early_devices, .init_irq = r8a7740_init_irq, - .handle_irq = shmobile_handle_irq_intc, .init_machine = eva_init, .init_late = shmobile_init_late, .init_time = eva_earlytimer_init, diff --git a/arch/arm/mach-shmobile/board-bockw.c b/arch/arm/mach-shmobile/board-bockw.c new file mode 100644 index 000000000000..38e5e50fb318 --- /dev/null +++ b/arch/arm/mach-shmobile/board-bockw.c @@ -0,0 +1,81 @@ +/* + * Bock-W board support + * + * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/platform_device.h> +#include <linux/smsc911x.h> +#include <mach/common.h> +#include <mach/irqs.h> +#include <mach/r8a7778.h> +#include <asm/mach/arch.h> + +static struct smsc911x_platform_config smsc911x_data = { + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, + .flags = SMSC911X_USE_32BIT, + .phy_interface = PHY_INTERFACE_MODE_MII, +}; + +static struct resource smsc911x_resources[] = { + DEFINE_RES_MEM(0x18300000, 0x1000), + DEFINE_RES_IRQ(irq_pin(0)), /* IRQ 0 */ +}; + +#define IRQ0MR 0x30 +static void __init bockw_init(void) +{ + void __iomem *fpga; + + r8a7778_clock_init(); + r8a7778_init_irq_extpin(1); + r8a7778_add_standard_devices(); + + fpga = ioremap_nocache(0x18200000, SZ_1M); + if (fpga) { + /* + * CAUTION + * + * IRQ0/1 is cascaded interrupt from FPGA. + * it should be cared in the future + * Now, it is assuming IRQ0 was used only from SMSC. + */ + u16 val = ioread16(fpga + IRQ0MR); + val &= ~(1 << 4); /* enable SMSC911x */ + iowrite16(val, fpga + IRQ0MR); + iounmap(fpga); + + platform_device_register_resndata( + &platform_bus, "smsc911x", -1, + smsc911x_resources, ARRAY_SIZE(smsc911x_resources), + &smsc911x_data, sizeof(smsc911x_data)); + } +} + +static const char *bockw_boards_compat_dt[] __initdata = { + "renesas,bockw", + NULL, +}; + +DT_MACHINE_START(BOCKW_DT, "bockw") + .init_early = r8a7778_init_delay, + .init_irq = r8a7778_init_irq_dt, + .init_machine = bockw_init, + .init_time = shmobile_timer_init, + .dt_compat = bockw_boards_compat_dt, +MACHINE_END diff --git a/arch/arm/mach-shmobile/board-bonito.c b/arch/arm/mach-shmobile/board-bonito.c index e50f86691539..70d992c540ae 100644 --- a/arch/arm/mach-shmobile/board-bonito.c +++ b/arch/arm/mach-shmobile/board-bonito.c @@ -24,6 +24,7 @@ #include <linux/init.h> #include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/pinctrl/machine.h> #include <linux/platform_device.h> #include <linux/gpio.h> #include <linux/regulator/fixed.h> @@ -288,6 +289,16 @@ static struct platform_device lcdc0_device = { }, }; +static const struct pinctrl_map lcdc0_pinctrl_map[] = { + /* LCD0 */ + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-r8a7740", + "lcd0_data24_1", "lcd0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-r8a7740", + "lcd0_lclk_1", "lcd0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-r8a7740", + "lcd0_sync", "lcd0"), +}; + /* * SMSC 9221 */ @@ -392,8 +403,8 @@ static void __init bonito_init(void) /* * base board settings */ - gpio_request_one(GPIO_PORT176, GPIOF_IN, NULL); - if (!gpio_get_value(GPIO_PORT176)) { + gpio_request_one(176, GPIOF_IN, NULL); + if (!gpio_get_value(176)) { u16 bsw2; u16 bsw3; u16 bsw4; @@ -430,38 +441,11 @@ static void __init bonito_init(void) */ if (BIT_ON(bsw2, 3) && /* S38.1 = OFF */ BIT_ON(bsw2, 2)) { /* S38.2 = OFF */ - gpio_request(GPIO_FN_LCDC0_SELECT, NULL); - gpio_request(GPIO_FN_LCD0_D0, NULL); - gpio_request(GPIO_FN_LCD0_D1, NULL); - gpio_request(GPIO_FN_LCD0_D2, NULL); - gpio_request(GPIO_FN_LCD0_D3, NULL); - gpio_request(GPIO_FN_LCD0_D4, NULL); - gpio_request(GPIO_FN_LCD0_D5, NULL); - gpio_request(GPIO_FN_LCD0_D6, NULL); - gpio_request(GPIO_FN_LCD0_D7, NULL); - gpio_request(GPIO_FN_LCD0_D8, NULL); - gpio_request(GPIO_FN_LCD0_D9, NULL); - gpio_request(GPIO_FN_LCD0_D10, NULL); - gpio_request(GPIO_FN_LCD0_D11, NULL); - gpio_request(GPIO_FN_LCD0_D12, NULL); - gpio_request(GPIO_FN_LCD0_D13, NULL); - gpio_request(GPIO_FN_LCD0_D14, NULL); - gpio_request(GPIO_FN_LCD0_D15, NULL); - gpio_request(GPIO_FN_LCD0_D16, NULL); - gpio_request(GPIO_FN_LCD0_D17, NULL); - gpio_request(GPIO_FN_LCD0_D18_PORT163, NULL); - gpio_request(GPIO_FN_LCD0_D19_PORT162, NULL); - gpio_request(GPIO_FN_LCD0_D20_PORT161, NULL); - gpio_request(GPIO_FN_LCD0_D21_PORT158, NULL); - gpio_request(GPIO_FN_LCD0_D22_PORT160, NULL); - gpio_request(GPIO_FN_LCD0_D23_PORT159, NULL); - gpio_request(GPIO_FN_LCD0_DCK, NULL); - gpio_request(GPIO_FN_LCD0_VSYN, NULL); - gpio_request(GPIO_FN_LCD0_HSYN, NULL); - gpio_request(GPIO_FN_LCD0_DISP, NULL); - gpio_request(GPIO_FN_LCD0_LCLK_PORT165, NULL); - - gpio_request_one(GPIO_PORT61, GPIOF_OUT_INIT_HIGH, + pinctrl_register_mappings(lcdc0_pinctrl_map, + ARRAY_SIZE(lcdc0_pinctrl_map)); + gpio_request(GPIO_FN_LCDC0_SELECT, NULL); + + gpio_request_one(61, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */ /* backlight on */ diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c index 2ccc860403ef..ef5ca0ef0cb5 100644 --- a/arch/arm/mach-shmobile/board-kota2.c +++ b/arch/arm/mach-shmobile/board-kota2.c @@ -24,6 +24,8 @@ #include <linux/init.h> #include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/pinctrl/machine.h> +#include <linux/pinctrl/pinconf-generic.h> #include <linux/platform_device.h> #include <linux/delay.h> #include <linux/io.h> @@ -135,17 +137,17 @@ static struct platform_device keysc_device = { #define GPIO_KEY(c, g, d) { .code = c, .gpio = g, .desc = d, .active_low = 1 } static struct gpio_keys_button gpio_buttons[] = { - GPIO_KEY(KEY_VOLUMEUP, GPIO_PORT56, "+"), /* S2: VOL+ [IRQ9] */ - GPIO_KEY(KEY_VOLUMEDOWN, GPIO_PORT54, "-"), /* S3: VOL- [IRQ10] */ - GPIO_KEY(KEY_MENU, GPIO_PORT27, "Menu"), /* S4: MENU [IRQ30] */ - GPIO_KEY(KEY_HOMEPAGE, GPIO_PORT26, "Home"), /* S5: HOME [IRQ31] */ - GPIO_KEY(KEY_BACK, GPIO_PORT11, "Back"), /* S6: BACK [IRQ0] */ - GPIO_KEY(KEY_PHONE, GPIO_PORT238, "Tel"), /* S7: TEL [IRQ11] */ - GPIO_KEY(KEY_POWER, GPIO_PORT239, "C1"), /* S8: CAM [IRQ13] */ - GPIO_KEY(KEY_MAIL, GPIO_PORT224, "Mail"), /* S9: MAIL [IRQ3] */ - /* Omitted button "C3?": GPIO_PORT223 - S10: CUST [IRQ8] */ - GPIO_KEY(KEY_CAMERA, GPIO_PORT164, "C2"), /* S11: CAM_HALF [IRQ25] */ - /* Omitted button "?": GPIO_PORT152 - S12: CAM_FULL [No IRQ] */ + GPIO_KEY(KEY_VOLUMEUP, 56, "+"), /* S2: VOL+ [IRQ9] */ + GPIO_KEY(KEY_VOLUMEDOWN, 54, "-"), /* S3: VOL- [IRQ10] */ + GPIO_KEY(KEY_MENU, 27, "Menu"), /* S4: MENU [IRQ30] */ + GPIO_KEY(KEY_HOMEPAGE, 26, "Home"), /* S5: HOME [IRQ31] */ + GPIO_KEY(KEY_BACK, 11, "Back"), /* S6: BACK [IRQ0] */ + GPIO_KEY(KEY_PHONE, 238, "Tel"), /* S7: TEL [IRQ11] */ + GPIO_KEY(KEY_POWER, 239, "C1"), /* S8: CAM [IRQ13] */ + GPIO_KEY(KEY_MAIL, 224, "Mail"), /* S9: MAIL [IRQ3] */ + /* Omitted button "C3?": 223 - S10: CUST [IRQ8] */ + GPIO_KEY(KEY_CAMERA, 164, "C2"), /* S11: CAM_HALF [IRQ25] */ + /* Omitted button "?": 152 - S12: CAM_FULL [No IRQ] */ }; static struct gpio_keys_platform_data gpio_key_info = { @@ -165,9 +167,9 @@ static struct platform_device gpio_keys_device = { #define GPIO_LED(n, g) { .name = n, .gpio = g } static struct gpio_led gpio_leds[] = { - GPIO_LED("G", GPIO_PORT20), /* PORT20 [GPO0] -> LED7 -> "G" */ - GPIO_LED("H", GPIO_PORT21), /* PORT21 [GPO1] -> LED8 -> "H" */ - GPIO_LED("J", GPIO_PORT22), /* PORT22 [GPO2] -> LED9 -> "J" */ + GPIO_LED("G", 20), /* PORT20 [GPO0] -> LED7 -> "G" */ + GPIO_LED("H", 21), /* PORT21 [GPO1] -> LED8 -> "H" */ + GPIO_LED("J", 22), /* PORT22 [GPO2] -> LED9 -> "J" */ }; static struct gpio_led_platform_data gpio_leds_info = { @@ -187,7 +189,7 @@ static struct platform_device gpio_leds_device = { static struct led_renesas_tpu_config led_renesas_tpu12_pdata = { .name = "V2513", .pin_gpio_fn = GPIO_FN_TPU1TO2, - .pin_gpio = GPIO_PORT153, + .pin_gpio = 153, .channel_offset = 0x90, .timer_bit = 2, .max_brightness = 1000, @@ -215,7 +217,7 @@ static struct platform_device leds_tpu12_device = { static struct led_renesas_tpu_config led_renesas_tpu41_pdata = { .name = "V2514", .pin_gpio_fn = GPIO_FN_TPU4TO1, - .pin_gpio = GPIO_PORT199, + .pin_gpio = 199, .channel_offset = 0x50, .timer_bit = 1, .max_brightness = 1000, @@ -243,7 +245,7 @@ static struct platform_device leds_tpu41_device = { static struct led_renesas_tpu_config led_renesas_tpu21_pdata = { .name = "V2515", .pin_gpio_fn = GPIO_FN_TPU2TO1, - .pin_gpio = GPIO_PORT197, + .pin_gpio = 197, .channel_offset = 0x50, .timer_bit = 1, .max_brightness = 1000, @@ -271,7 +273,7 @@ static struct platform_device leds_tpu21_device = { static struct led_renesas_tpu_config led_renesas_tpu30_pdata = { .name = "KEYLED", .pin_gpio_fn = GPIO_FN_TPU3TO0, - .pin_gpio = GPIO_PORT163, + .pin_gpio = 163, .channel_offset = 0x10, .timer_bit = 0, .max_brightness = 1000, @@ -433,6 +435,85 @@ static struct platform_device *kota2_devices[] __initdata = { &sdhi1_device, }; +static unsigned long pin_pullup_conf[] = { + PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_UP, 0), +}; + +static const struct pinctrl_map kota2_pinctrl_map[] = { + /* KEYSC */ + PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0", + "keysc_in8", "keysc"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0", + "keysc_out04", "keysc"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0", + "keysc_out5", "keysc"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0", + "keysc_out6_0", "keysc"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0", + "keysc_out7_0", "keysc"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0", + "keysc_out8_0", "keysc"), + PIN_MAP_CONFIGS_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0", + "keysc_in8", pin_pullup_conf), + /* MMCIF */ + PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0", + "mmc0_data8_0", "mmc0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0", + "mmc0_ctrl_0", "mmc0"), + PIN_MAP_CONFIGS_PIN_DEFAULT("sh_mmcif.0", "pfc-sh73a0", + "PORT279", pin_pullup_conf), + PIN_MAP_CONFIGS_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0", + "mmc0_data8_0", pin_pullup_conf), + /* SCIFA2 (UART2) */ + PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "pfc-sh73a0", + "scifa2_data_0", "scifa2"), + PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "pfc-sh73a0", + "scifa2_ctrl_0", "scifa2"), + /* SCIFA4 (UART1) */ + PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-sh73a0", + "scifa4_data", "scifa4"), + PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-sh73a0", + "scifa4_ctrl", "scifa4"), + /* SCIFB (BT) */ + PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.8", "pfc-sh73a0", + "scifb_data_0", "scifb"), + PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.8", "pfc-sh73a0", + "scifb_clk_0", "scifb"), + PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.8", "pfc-sh73a0", + "scifb_ctrl_0", "scifb"), + /* SDHI0 (microSD) */ + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0", + "sdhi0_data4", "sdhi0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0", + "sdhi0_ctrl", "sdhi0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0", + "sdhi0_cd", "sdhi0"), + PIN_MAP_CONFIGS_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0", + "sdhi0_data4", pin_pullup_conf), + PIN_MAP_CONFIGS_PIN_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0", + "PORT256", pin_pullup_conf), + PIN_MAP_CONFIGS_PIN_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0", + "PORT251", pin_pullup_conf), + /* SDHI1 (BCM4330) */ + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh73a0", + "sdhi1_data4", "sdhi1"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh73a0", + "sdhi1_ctrl", "sdhi1"), + PIN_MAP_CONFIGS_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh73a0", + "sdhi1_data4", pin_pullup_conf), + PIN_MAP_CONFIGS_PIN_DEFAULT("sh_mobile_sdhi.1", "pfc-sh73a0", + "PORT263", pin_pullup_conf), + /* SMSC911X */ + PIN_MAP_MUX_GROUP_DEFAULT("smsc911x.0", "pfc-sh73a0", + "bsc_data_0_7", "bsc"), + PIN_MAP_MUX_GROUP_DEFAULT("smsc911x.0", "pfc-sh73a0", + "bsc_data_8_15", "bsc"), + PIN_MAP_MUX_GROUP_DEFAULT("smsc911x.0", "pfc-sh73a0", + "bsc_cs5_a", "bsc"), + PIN_MAP_MUX_GROUP_DEFAULT("smsc911x.0", "pfc-sh73a0", + "bsc_we0", "bsc"), +}; + static void __init kota2_init(void) { regulator_register_always_on(0, "fixed-1.8V", fixed1v8_power_consumers, @@ -441,97 +522,16 @@ static void __init kota2_init(void) ARRAY_SIZE(fixed3v3_power_consumers), 3300000); regulator_register_fixed(2, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + pinctrl_register_mappings(kota2_pinctrl_map, + ARRAY_SIZE(kota2_pinctrl_map)); sh73a0_pinmux_init(); - /* SCIFA2 (UART2) */ - gpio_request(GPIO_FN_SCIFA2_TXD1, NULL); - gpio_request(GPIO_FN_SCIFA2_RXD1, NULL); - gpio_request(GPIO_FN_SCIFA2_RTS1_, NULL); - gpio_request(GPIO_FN_SCIFA2_CTS1_, NULL); - - /* SCIFA4 (UART1) */ - gpio_request(GPIO_FN_SCIFA4_TXD, NULL); - gpio_request(GPIO_FN_SCIFA4_RXD, NULL); - gpio_request(GPIO_FN_SCIFA4_RTS_, NULL); - gpio_request(GPIO_FN_SCIFA4_CTS_, NULL); - /* SMSC911X */ - gpio_request(GPIO_FN_D0_NAF0, NULL); - gpio_request(GPIO_FN_D1_NAF1, NULL); - gpio_request(GPIO_FN_D2_NAF2, NULL); - gpio_request(GPIO_FN_D3_NAF3, NULL); - gpio_request(GPIO_FN_D4_NAF4, NULL); - gpio_request(GPIO_FN_D5_NAF5, NULL); - gpio_request(GPIO_FN_D6_NAF6, NULL); - gpio_request(GPIO_FN_D7_NAF7, NULL); - gpio_request(GPIO_FN_D8_NAF8, NULL); - gpio_request(GPIO_FN_D9_NAF9, NULL); - gpio_request(GPIO_FN_D10_NAF10, NULL); - gpio_request(GPIO_FN_D11_NAF11, NULL); - gpio_request(GPIO_FN_D12_NAF12, NULL); - gpio_request(GPIO_FN_D13_NAF13, NULL); - gpio_request(GPIO_FN_D14_NAF14, NULL); - gpio_request(GPIO_FN_D15_NAF15, NULL); - gpio_request(GPIO_FN_CS5A_, NULL); - gpio_request(GPIO_FN_WE0__FWE, NULL); - gpio_request_one(GPIO_PORT144, GPIOF_IN, NULL); /* PINTA2 */ - gpio_request_one(GPIO_PORT145, GPIOF_OUT_INIT_HIGH, NULL); /* RESET */ - - /* KEYSC */ - gpio_request(GPIO_FN_KEYIN0_PU, NULL); - gpio_request(GPIO_FN_KEYIN1_PU, NULL); - gpio_request(GPIO_FN_KEYIN2_PU, NULL); - gpio_request(GPIO_FN_KEYIN3_PU, NULL); - gpio_request(GPIO_FN_KEYIN4_PU, NULL); - gpio_request(GPIO_FN_KEYIN5_PU, NULL); - gpio_request(GPIO_FN_KEYIN6_PU, NULL); - gpio_request(GPIO_FN_KEYIN7_PU, NULL); - gpio_request(GPIO_FN_KEYOUT0, NULL); - gpio_request(GPIO_FN_KEYOUT1, NULL); - gpio_request(GPIO_FN_KEYOUT2, NULL); - gpio_request(GPIO_FN_KEYOUT3, NULL); - gpio_request(GPIO_FN_KEYOUT4, NULL); - gpio_request(GPIO_FN_KEYOUT5, NULL); - gpio_request(GPIO_FN_PORT59_KEYOUT6, NULL); - gpio_request(GPIO_FN_PORT58_KEYOUT7, NULL); - gpio_request(GPIO_FN_KEYOUT8, NULL); + gpio_request_one(144, GPIOF_IN, NULL); /* PINTA2 */ + gpio_request_one(145, GPIOF_OUT_INIT_HIGH, NULL); /* RESET */ /* MMCIF */ - gpio_request(GPIO_FN_MMCCLK0, NULL); - gpio_request(GPIO_FN_MMCD0_0, NULL); - gpio_request(GPIO_FN_MMCD0_1, NULL); - gpio_request(GPIO_FN_MMCD0_2, NULL); - gpio_request(GPIO_FN_MMCD0_3, NULL); - gpio_request(GPIO_FN_MMCD0_4, NULL); - gpio_request(GPIO_FN_MMCD0_5, NULL); - gpio_request(GPIO_FN_MMCD0_6, NULL); - gpio_request(GPIO_FN_MMCD0_7, NULL); - gpio_request(GPIO_FN_MMCCMD0, NULL); - gpio_request_one(GPIO_PORT208, GPIOF_OUT_INIT_HIGH, NULL); /* Reset */ - - /* SDHI0 (microSD) */ - gpio_request(GPIO_FN_SDHICD0_PU, NULL); - gpio_request(GPIO_FN_SDHICMD0_PU, NULL); - gpio_request(GPIO_FN_SDHICLK0, NULL); - gpio_request(GPIO_FN_SDHID0_3_PU, NULL); - gpio_request(GPIO_FN_SDHID0_2_PU, NULL); - gpio_request(GPIO_FN_SDHID0_1_PU, NULL); - gpio_request(GPIO_FN_SDHID0_0_PU, NULL); - - /* SCIFB (BT) */ - gpio_request(GPIO_FN_PORT159_SCIFB_SCK, NULL); - gpio_request(GPIO_FN_PORT160_SCIFB_TXD, NULL); - gpio_request(GPIO_FN_PORT161_SCIFB_CTS_, NULL); - gpio_request(GPIO_FN_PORT162_SCIFB_RXD, NULL); - gpio_request(GPIO_FN_PORT163_SCIFB_RTS_, NULL); - - /* SDHI1 (BCM4330) */ - gpio_request(GPIO_FN_SDHICLK1, NULL); - gpio_request(GPIO_FN_SDHICMD1_PU, NULL); - gpio_request(GPIO_FN_SDHID1_3_PU, NULL); - gpio_request(GPIO_FN_SDHID1_2_PU, NULL); - gpio_request(GPIO_FN_SDHID1_1_PU, NULL); - gpio_request(GPIO_FN_SDHID1_0_PU, NULL); + gpio_request_one(208, GPIOF_OUT_INIT_HIGH, NULL); /* Reset */ #ifdef CONFIG_CACHE_L2X0 /* Early BRESP enable, Shared attribute override enable, 64K*8way */ diff --git a/arch/arm/mach-shmobile/board-kzm9d.c b/arch/arm/mach-shmobile/board-kzm9d.c index c254782aa727..c016ccd92433 100644 --- a/arch/arm/mach-shmobile/board-kzm9d.c +++ b/arch/arm/mach-shmobile/board-kzm9d.c @@ -90,6 +90,5 @@ DT_MACHINE_START(KZM9D_DT, "kzm9d") .init_irq = emev2_init_irq, .init_machine = kzm9d_add_standard_devices, .init_late = shmobile_init_late, - .init_time = shmobile_timer_init, .dt_compat = kzm9d_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/board-kzm9g-reference.c b/arch/arm/mach-shmobile/board-kzm9g-reference.c new file mode 100644 index 000000000000..aefa50d385b7 --- /dev/null +++ b/arch/arm/mach-shmobile/board-kzm9g-reference.c @@ -0,0 +1,107 @@ +/* + * KZM-A9-GT board support - Reference Device Tree Implementation + * + * Copyright (C) 2012 Horms Solutions Ltd. + * + * Based on board-kzm9g.c + * Copyright (C) 2012 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/delay.h> +#include <linux/gpio.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/irqchip.h> +#include <linux/input.h> +#include <linux/of_platform.h> +#include <linux/pinctrl/machine.h> +#include <linux/pinctrl/pinconf-generic.h> +#include <mach/sh73a0.h> +#include <mach/common.h> +#include <asm/hardware/cache-l2x0.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +static unsigned long pin_pullup_conf[] = { + PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_UP, 0), +}; + +static const struct pinctrl_map kzm_pinctrl_map[] = { + PIN_MAP_MUX_GROUP_DEFAULT("e6826000.i2c", "pfc-sh73a0", + "i2c3_1", "i2c3"), + /* MMCIF */ + PIN_MAP_MUX_GROUP_DEFAULT("e6bd0000.mmcif", "pfc-sh73a0", + "mmc0_data8_0", "mmc0"), + PIN_MAP_MUX_GROUP_DEFAULT("e6bd0000.mmcif", "pfc-sh73a0", + "mmc0_ctrl_0", "mmc0"), + PIN_MAP_CONFIGS_PIN_DEFAULT("e6bd0000.mmcif", "pfc-sh73a0", + "PORT279", pin_pullup_conf), + PIN_MAP_CONFIGS_GROUP_DEFAULT("e6bd0000.mmcif", "pfc-sh73a0", + "mmc0_data8_0", pin_pullup_conf), + /* SCIFA4 */ + PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-sh73a0", + "scifa4_data", "scifa4"), + PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-sh73a0", + "scifa4_ctrl", "scifa4"), + /* SDHI0 */ + PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "pfc-sh73a0", + "sdhi0_data4", "sdhi0"), + PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "pfc-sh73a0", + "sdhi0_ctrl", "sdhi0"), + PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "pfc-sh73a0", + "sdhi0_cd", "sdhi0"), + PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "pfc-sh73a0", + "sdhi0_wp", "sdhi0"), + /* SDHI2 */ + PIN_MAP_MUX_GROUP_DEFAULT("ee140000.sdhi", "pfc-sh73a0", + "sdhi2_data4", "sdhi2"), + PIN_MAP_MUX_GROUP_DEFAULT("ee140000.sdhi", "pfc-sh73a0", + "sdhi2_ctrl", "sdhi2"), +}; + +static void __init kzm_init(void) +{ + sh73a0_add_standard_devices_dt(); + pinctrl_register_mappings(kzm_pinctrl_map, ARRAY_SIZE(kzm_pinctrl_map)); + sh73a0_pinmux_init(); + + /* enable SD */ + gpio_request(GPIO_FN_SDHI0_VCCQ_MC0_ON, NULL); + gpio_request_one(15, GPIOF_OUT_INIT_HIGH, NULL); /* power */ + + gpio_request_one(14, GPIOF_OUT_INIT_HIGH, NULL); /* power */ + +#ifdef CONFIG_CACHE_L2X0 + /* Early BRESP enable, Shared attribute override enable, 64K*8way */ + l2x0_init(IOMEM(0xf0100000), 0x40460000, 0x82000fff); +#endif +} + +static const char *kzm9g_boards_compat_dt[] __initdata = { + "renesas,kzm9g-reference", + NULL, +}; + +DT_MACHINE_START(KZM9G_DT, "kzm9g-reference") + .smp = smp_ops(sh73a0_smp_ops), + .map_io = sh73a0_map_io, + .init_early = sh73a0_init_delay, + .nr_irqs = NR_IRQS_LEGACY, + .init_irq = irqchip_init, + .init_machine = kzm_init, + .init_time = shmobile_timer_init, + .dt_compat = kzm9g_boards_compat_dt, +MACHINE_END diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c index 7f3a6b7e7b7c..e6b775a10aad 100644 --- a/arch/arm/mach-shmobile/board-kzm9g.c +++ b/arch/arm/mach-shmobile/board-kzm9g.c @@ -30,6 +30,8 @@ #include <linux/mmc/sh_mmcif.h> #include <linux/mmc/sh_mobile_sdhi.h> #include <linux/mfd/tmio.h> +#include <linux/pinctrl/machine.h> +#include <linux/pinctrl/pinconf-generic.h> #include <linux/platform_device.h> #include <linux/regulator/fixed.h> #include <linux/regulator/machine.h> @@ -61,8 +63,8 @@ /* Dummy supplies, where voltage doesn't matter */ static struct regulator_consumer_supply dummy_supplies[] = { - REGULATOR_SUPPLY("vddvario", "smsc911x"), - REGULATOR_SUPPLY("vdd33a", "smsc911x"), + REGULATOR_SUPPLY("vddvario", "smsc911x.0"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), }; /* @@ -81,7 +83,7 @@ static struct resource smsc9221_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = intcs_evt2irq(0x260), /* IRQ3 */ + .start = irq_pin(3), /* IRQ3 */ .flags = IORESOURCE_IRQ, }, }; @@ -115,7 +117,7 @@ static struct resource usb_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = intcs_evt2irq(0x220), /* IRQ1 */ + .start = irq_pin(1), /* IRQ1 */ .flags = IORESOURCE_IRQ, }, }; @@ -138,7 +140,7 @@ struct usbhs_private { struct renesas_usbhs_platform_info info; }; -#define IRQ15 intcs_evt2irq(0x03e0) +#define IRQ15 irq_pin(15) #define USB_PHY_MODE (1 << 4) #define USB_PHY_INT_EN ((1 << 3) | (1 << 2)) #define USB_PHY_ON (1 << 1) @@ -155,12 +157,14 @@ static int usbhs_get_vbus(struct platform_device *pdev) return !((1 << 7) & __raw_readw(priv->cr2)); } -static void usbhs_phy_reset(struct platform_device *pdev) +static int usbhs_phy_reset(struct platform_device *pdev) { struct usbhs_private *priv = usbhs_get_priv(pdev); /* init phy */ __raw_writew(0x8a0a, priv->cr2); + + return 0; } static int usbhs_get_id(struct platform_device *pdev) @@ -202,7 +206,7 @@ static int usbhs_hardware_init(struct platform_device *pdev) return 0; } -static void usbhs_hardware_exit(struct platform_device *pdev) +static int usbhs_hardware_exit(struct platform_device *pdev) { struct usbhs_private *priv = usbhs_get_priv(pdev); @@ -210,6 +214,8 @@ static void usbhs_hardware_exit(struct platform_device *pdev) __raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->phy); free_irq(IRQ15, pdev); + + return 0; } static u32 usbhs_pipe_cfg[] = { @@ -373,13 +379,64 @@ static struct platform_device mmc_device = { .resource = sh_mmcif_resources, }; -/* Fixed 2.8V regulators to be used by SDHI0 and SDHI2 */ -static struct regulator_consumer_supply fixed2v8_power_consumers[] = +/* Fixed 3.3V regulators to be used by SDHI0 */ +static struct regulator_consumer_supply vcc_sdhi0_consumers[] = { REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), - REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), +}; + +static struct regulator_init_data vcc_sdhi0_init_data = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(vcc_sdhi0_consumers), + .consumer_supplies = vcc_sdhi0_consumers, +}; + +static struct fixed_voltage_config vcc_sdhi0_info = { + .supply_name = "SDHI0 Vcc", + .microvolts = 3300000, + .gpio = 15, + .enable_high = 1, + .init_data = &vcc_sdhi0_init_data, +}; + +static struct platform_device vcc_sdhi0 = { + .name = "reg-fixed-voltage", + .id = 0, + .dev = { + .platform_data = &vcc_sdhi0_info, + }, +}; + +/* Fixed 3.3V regulators to be used by SDHI2 */ +static struct regulator_consumer_supply vcc_sdhi2_consumers[] = +{ REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.2"), - REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.2"), +}; + +static struct regulator_init_data vcc_sdhi2_init_data = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(vcc_sdhi2_consumers), + .consumer_supplies = vcc_sdhi2_consumers, +}; + +static struct fixed_voltage_config vcc_sdhi2_info = { + .supply_name = "SDHI2 Vcc", + .microvolts = 3300000, + .gpio = 14, + .enable_high = 1, + .init_data = &vcc_sdhi2_init_data, +}; + +static struct platform_device vcc_sdhi2 = { + .name = "reg-fixed-voltage", + .id = 1, + .dev = { + .platform_data = &vcc_sdhi2_info, + }, }; /* SDHI */ @@ -387,8 +444,8 @@ static struct sh_mobile_sdhi_info sdhi0_info = { .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT, - .tmio_caps = MMC_CAP_SD_HIGHSPEED, - .tmio_ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29, + .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ | + MMC_CAP_POWER_OFF_CARD, }; static struct resource sdhi0_resources[] = { @@ -431,9 +488,8 @@ static struct sh_mobile_sdhi_info sdhi2_info = { .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD | TMIO_MMC_WRPROTECT_DISABLE, - .tmio_caps = MMC_CAP_SD_HIGHSPEED, - .tmio_ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29, - .cd_gpio = GPIO_PORT13, + .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_POWER_OFF_CARD, + .cd_gpio = 13, }; static struct resource sdhi2_resources[] = { @@ -563,25 +619,25 @@ static struct i2c_board_info i2c0_devices[] = { }, { I2C_BOARD_INFO("ak8975", 0x0c), - .irq = intcs_evt2irq(0x3380), /* IRQ28 */ + .irq = irq_pin(28), /* IRQ28 */ }, { I2C_BOARD_INFO("adxl34x", 0x1d), - .irq = intcs_evt2irq(0x3340), /* IRQ26 */ + .irq = irq_pin(26), /* IRQ26 */ }, }; static struct i2c_board_info i2c1_devices[] = { { I2C_BOARD_INFO("st1232-ts", 0x55), - .irq = intcs_evt2irq(0x300), /* IRQ8 */ + .irq = irq_pin(8), /* IRQ8 */ }, }; static struct i2c_board_info i2c3_devices[] = { { I2C_BOARD_INFO("pcf8575", 0x20), - .irq = intcs_evt2irq(0x3260), /* IRQ19 */ + .irq = irq_pin(19), /* IRQ19 */ .platform_data = &pcf8575_pdata, }, }; @@ -592,6 +648,8 @@ static struct platform_device *kzm_devices[] __initdata = { &usbhs_device, &lcdc_device, &mmc_device, + &vcc_sdhi0, + &vcc_sdhi2, &sdhi0_device, &sdhi2_device, &gpio_keys_device, @@ -599,6 +657,64 @@ static struct platform_device *kzm_devices[] __initdata = { &fsi_ak4648_device, }; +static unsigned long pin_pullup_conf[] = { + PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_UP, 0), +}; + +static const struct pinctrl_map kzm_pinctrl_map[] = { + /* FSIA (AK4648) */ + PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0", + "fsia_mclk_in", "fsia"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0", + "fsia_sclk_in", "fsia"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0", + "fsia_data_in", "fsia"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0", + "fsia_data_out", "fsia"), + /* I2C3 */ + PIN_MAP_MUX_GROUP_DEFAULT("i2c-sh_mobile.3", "pfc-sh73a0", + "i2c3_1", "i2c3"), + /* LCD */ + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-sh73a0", + "lcd_data24", "lcd"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-sh73a0", + "lcd_sync", "lcd"), + /* MMCIF */ + PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0", + "mmc0_data8_0", "mmc0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0", + "mmc0_ctrl_0", "mmc0"), + PIN_MAP_CONFIGS_PIN_DEFAULT("sh_mmcif.0", "pfc-sh73a0", + "PORT279", pin_pullup_conf), + PIN_MAP_CONFIGS_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0", + "mmc0_data8_0", pin_pullup_conf), + /* SCIFA4 */ + PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-sh73a0", + "scifa4_data", "scifa4"), + PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-sh73a0", + "scifa4_ctrl", "scifa4"), + /* SDHI0 */ + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0", + "sdhi0_data4", "sdhi0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0", + "sdhi0_ctrl", "sdhi0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0", + "sdhi0_cd", "sdhi0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0", + "sdhi0_wp", "sdhi0"), + /* SDHI2 */ + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-sh73a0", + "sdhi2_data4", "sdhi2"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-sh73a0", + "sdhi2_ctrl", "sdhi2"), + /* SMSC */ + PIN_MAP_MUX_GROUP_DEFAULT("smsc911x.0", "pfc-sh73a0", + "bsc_cs4", "bsc"), + /* USB */ + PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs", "pfc-sh73a0", + "usb_vbus", "usb"), +}; + /* * FIXME * @@ -654,106 +770,26 @@ device_initcall(as3711_enable_lcdc_backlight); static void __init kzm_init(void) { - regulator_register_always_on(0, "fixed-1.8V", fixed1v8_power_consumers, + regulator_register_always_on(2, "fixed-1.8V", fixed1v8_power_consumers, ARRAY_SIZE(fixed1v8_power_consumers), 1800000); - regulator_register_always_on(1, "fixed-2.8V", fixed2v8_power_consumers, - ARRAY_SIZE(fixed2v8_power_consumers), 2800000); - regulator_register_fixed(2, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + regulator_register_fixed(3, dummy_supplies, ARRAY_SIZE(dummy_supplies)); - sh73a0_pinmux_init(); - - /* enable SCIFA4 */ - gpio_request(GPIO_FN_SCIFA4_TXD, NULL); - gpio_request(GPIO_FN_SCIFA4_RXD, NULL); - gpio_request(GPIO_FN_SCIFA4_RTS_, NULL); - gpio_request(GPIO_FN_SCIFA4_CTS_, NULL); + pinctrl_register_mappings(kzm_pinctrl_map, ARRAY_SIZE(kzm_pinctrl_map)); - /* CS4 for SMSC/USB */ - gpio_request(GPIO_FN_CS4_, NULL); /* CS4 */ + sh73a0_pinmux_init(); /* SMSC */ - gpio_request_one(GPIO_PORT224, GPIOF_IN, NULL); /* IRQ3 */ + gpio_request_one(224, GPIOF_IN, NULL); /* IRQ3 */ /* LCDC */ - gpio_request(GPIO_FN_LCDD23, NULL); - gpio_request(GPIO_FN_LCDD22, NULL); - gpio_request(GPIO_FN_LCDD21, NULL); - gpio_request(GPIO_FN_LCDD20, NULL); - gpio_request(GPIO_FN_LCDD19, NULL); - gpio_request(GPIO_FN_LCDD18, NULL); - gpio_request(GPIO_FN_LCDD17, NULL); - gpio_request(GPIO_FN_LCDD16, NULL); - gpio_request(GPIO_FN_LCDD15, NULL); - gpio_request(GPIO_FN_LCDD14, NULL); - gpio_request(GPIO_FN_LCDD13, NULL); - gpio_request(GPIO_FN_LCDD12, NULL); - gpio_request(GPIO_FN_LCDD11, NULL); - gpio_request(GPIO_FN_LCDD10, NULL); - gpio_request(GPIO_FN_LCDD9, NULL); - gpio_request(GPIO_FN_LCDD8, NULL); - gpio_request(GPIO_FN_LCDD7, NULL); - gpio_request(GPIO_FN_LCDD6, NULL); - gpio_request(GPIO_FN_LCDD5, NULL); - gpio_request(GPIO_FN_LCDD4, NULL); - gpio_request(GPIO_FN_LCDD3, NULL); - gpio_request(GPIO_FN_LCDD2, NULL); - gpio_request(GPIO_FN_LCDD1, NULL); - gpio_request(GPIO_FN_LCDD0, NULL); - gpio_request(GPIO_FN_LCDDISP, NULL); - gpio_request(GPIO_FN_LCDDCK, NULL); - - gpio_request_one(GPIO_PORT222, GPIOF_OUT_INIT_HIGH, NULL); /* LCDCDON */ - gpio_request_one(GPIO_PORT226, GPIOF_OUT_INIT_HIGH, NULL); /* SC */ + gpio_request_one(222, GPIOF_OUT_INIT_HIGH, NULL); /* LCDCDON */ + gpio_request_one(226, GPIOF_OUT_INIT_HIGH, NULL); /* SC */ /* Touchscreen */ - gpio_request_one(GPIO_PORT223, GPIOF_IN, NULL); /* IRQ8 */ - - /* enable MMCIF */ - gpio_request(GPIO_FN_MMCCLK0, NULL); - gpio_request(GPIO_FN_MMCCMD0_PU, NULL); - gpio_request(GPIO_FN_MMCD0_0_PU, NULL); - gpio_request(GPIO_FN_MMCD0_1_PU, NULL); - gpio_request(GPIO_FN_MMCD0_2_PU, NULL); - gpio_request(GPIO_FN_MMCD0_3_PU, NULL); - gpio_request(GPIO_FN_MMCD0_4_PU, NULL); - gpio_request(GPIO_FN_MMCD0_5_PU, NULL); - gpio_request(GPIO_FN_MMCD0_6_PU, NULL); - gpio_request(GPIO_FN_MMCD0_7_PU, NULL); + gpio_request_one(223, GPIOF_IN, NULL); /* IRQ8 */ /* enable SD */ - gpio_request(GPIO_FN_SDHIWP0, NULL); - gpio_request(GPIO_FN_SDHICD0, NULL); - gpio_request(GPIO_FN_SDHICMD0, NULL); - gpio_request(GPIO_FN_SDHICLK0, NULL); - gpio_request(GPIO_FN_SDHID0_3, NULL); - gpio_request(GPIO_FN_SDHID0_2, NULL); - gpio_request(GPIO_FN_SDHID0_1, NULL); - gpio_request(GPIO_FN_SDHID0_0, NULL); gpio_request(GPIO_FN_SDHI0_VCCQ_MC0_ON, NULL); - gpio_request_one(GPIO_PORT15, GPIOF_OUT_INIT_HIGH, NULL); /* power */ - - /* enable Micro SD */ - gpio_request(GPIO_FN_SDHID2_0, NULL); - gpio_request(GPIO_FN_SDHID2_1, NULL); - gpio_request(GPIO_FN_SDHID2_2, NULL); - gpio_request(GPIO_FN_SDHID2_3, NULL); - gpio_request(GPIO_FN_SDHICMD2, NULL); - gpio_request(GPIO_FN_SDHICLK2, NULL); - gpio_request_one(GPIO_PORT14, GPIOF_OUT_INIT_HIGH, NULL); /* power */ - - /* I2C 3 */ - gpio_request(GPIO_FN_PORT27_I2C_SCL3, NULL); - gpio_request(GPIO_FN_PORT28_I2C_SDA3, NULL); - - /* enable FSI2 port A (ak4648) */ - gpio_request(GPIO_FN_FSIACK, NULL); - gpio_request(GPIO_FN_FSIAILR, NULL); - gpio_request(GPIO_FN_FSIAIBT, NULL); - gpio_request(GPIO_FN_FSIAISLD, NULL); - gpio_request(GPIO_FN_FSIAOSLD, NULL); - - /* enable USB */ - gpio_request(GPIO_FN_VBUS_0, NULL); #ifdef CONFIG_CACHE_L2X0 /* Early BRESP enable, Shared attribute override enable, 64K*8way */ diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c new file mode 100644 index 000000000000..f587187a8603 --- /dev/null +++ b/arch/arm/mach-shmobile/board-lager.c @@ -0,0 +1,46 @@ +/* + * Lager board support + * + * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/interrupt.h> +#include <linux/irqchip.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <mach/common.h> +#include <mach/r8a7790.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +static void __init lager_add_standard_devices(void) +{ + r8a7790_clock_init(); + r8a7790_add_standard_devices(); +} + +static const char *lager_boards_compat_dt[] __initdata = { + "renesas,lager", + NULL, +}; + +DT_MACHINE_START(LAGER_DT, "lager") + .init_irq = irqchip_init, + .init_time = r8a7790_timer_init, + .init_machine = lager_add_standard_devices, + .dt_compat = lager_boards_compat_dt, +MACHINE_END diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index db968a585ff0..fa3407da682a 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -40,6 +40,7 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> #include <linux/mtd/sh_flctl.h> +#include <linux/pinctrl/machine.h> #include <linux/pm_clock.h> #include <linux/regulator/fixed.h> #include <linux/regulator/machine.h> @@ -363,7 +364,7 @@ static struct fb_videomode mackerel_lcdc_modes[] = { static int mackerel_set_brightness(int brightness) { - gpio_set_value(GPIO_PORT31, brightness); + gpio_set_value(31, brightness); return 0; } @@ -596,12 +597,14 @@ static int usbhs_get_vbus(struct platform_device *pdev) return usbhs_is_connected(usbhs_get_priv(pdev)); } -static void usbhs_phy_reset(struct platform_device *pdev) +static int usbhs_phy_reset(struct platform_device *pdev) { struct usbhs_private *priv = usbhs_get_priv(pdev); /* init phy */ __raw_writew(0x8a0a, priv->usbcrcaddr); + + return 0; } static int usbhs0_get_id(struct platform_device *pdev) @@ -628,11 +631,13 @@ static int usbhs0_hardware_init(struct platform_device *pdev) return 0; } -static void usbhs0_hardware_exit(struct platform_device *pdev) +static int usbhs0_hardware_exit(struct platform_device *pdev) { struct usbhs_private *priv = usbhs_get_priv(pdev); cancel_delayed_work_sync(&priv->work); + + return 0; } static struct usbhs_private usbhs0_private = { @@ -735,7 +740,7 @@ static int usbhs1_hardware_init(struct platform_device *pdev) return 0; } -static void usbhs1_hardware_exit(struct platform_device *pdev) +static int usbhs1_hardware_exit(struct platform_device *pdev) { struct usbhs_private *priv = usbhs_get_priv(pdev); @@ -743,6 +748,8 @@ static void usbhs1_hardware_exit(struct platform_device *pdev) __raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->usbphyaddr); free_irq(IRQ8, pdev); + + return 0; } static int usbhs1_get_id(struct platform_device *pdev) @@ -819,22 +826,22 @@ static struct platform_device usbhs1_device = { static struct gpio_led mackerel_leds[] = { { .name = "led0", - .gpio = GPIO_PORT0, + .gpio = 0, .default_state = LEDS_GPIO_DEFSTATE_ON, }, { .name = "led1", - .gpio = GPIO_PORT1, + .gpio = 1, .default_state = LEDS_GPIO_DEFSTATE_ON, }, { .name = "led2", - .gpio = GPIO_PORT2, + .gpio = 2, .default_state = LEDS_GPIO_DEFSTATE_ON, }, { .name = "led3", - .gpio = GPIO_PORT159, + .gpio = 159, .default_state = LEDS_GPIO_DEFSTATE_ON, } }; @@ -962,40 +969,27 @@ static struct platform_device nand_flash_device = { }, }; -/* - * The card detect pin of the top SD/MMC slot (CN7) is active low and is - * connected to GPIO A22 of SH7372 (GPIO_PORT41). - */ -static int slot_cn7_get_cd(struct platform_device *pdev) -{ - return !gpio_get_value(GPIO_PORT41); -} - /* SDHI0 */ static struct sh_mobile_sdhi_info sdhi0_info = { .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, .tmio_flags = TMIO_MMC_USE_GPIO_CD, .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ, - .cd_gpio = GPIO_PORT172, + .cd_gpio = 172, }; static struct resource sdhi0_resources[] = { - [0] = { + { .name = "SDHI0", .start = 0xe6850000, .end = 0xe68500ff, .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x0e00) /* SDHI0_SDHI0I0 */, - .flags = IORESOURCE_IRQ, - }, - [2] = { + }, { + .name = SH_MOBILE_SDHI_IRQ_SDCARD, .start = evt2irq(0x0e20) /* SDHI0_SDHI0I1 */, .flags = IORESOURCE_IRQ, - }, - [3] = { + }, { + .name = SH_MOBILE_SDHI_IRQ_SDIO, .start = evt2irq(0x0e40) /* SDHI0_SDHI0I2 */, .flags = IORESOURCE_IRQ, }, @@ -1011,36 +1005,30 @@ static struct platform_device sdhi0_device = { }, }; -#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE) +#if !IS_ENABLED(CONFIG_MMC_SH_MMCIF) /* SDHI1 */ + +/* GPIO 41 can trigger IRQ8, but it is used by USBHS1, we have to poll */ static struct sh_mobile_sdhi_info sdhi1_info = { .dma_slave_tx = SHDMA_SLAVE_SDHI1_TX, .dma_slave_rx = SHDMA_SLAVE_SDHI1_RX, - .tmio_ocr_mask = MMC_VDD_165_195, - .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE, + .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_USE_GPIO_CD, .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ | MMC_CAP_NEEDS_POLL, - .get_cd = slot_cn7_get_cd, + .cd_gpio = 41, }; static struct resource sdhi1_resources[] = { - [0] = { + { .name = "SDHI1", .start = 0xe6860000, .end = 0xe68600ff, .flags = IORESOURCE_MEM, - }, - [1] = { - .name = SH_MOBILE_SDHI_IRQ_CARD_DETECT, - .start = evt2irq(0x0e80), /* SDHI1_SDHI1I0 */ - .flags = IORESOURCE_IRQ, - }, - [2] = { + }, { .name = SH_MOBILE_SDHI_IRQ_SDCARD, .start = evt2irq(0x0ea0), /* SDHI1_SDHI1I1 */ .flags = IORESOURCE_IRQ, - }, - [3] = { + }, { .name = SH_MOBILE_SDHI_IRQ_SDIO, .start = evt2irq(0x0ec0), /* SDHI1_SDHI1I2 */ .flags = IORESOURCE_IRQ, @@ -1058,43 +1046,32 @@ static struct platform_device sdhi1_device = { }; #endif +/* SDHI2 */ + /* * The card detect pin of the top SD/MMC slot (CN23) is active low and is - * connected to GPIO SCIFB_SCK of SH7372 (GPIO_PORT162). + * connected to GPIO SCIFB_SCK of SH7372 (GPIO 162). */ -static int slot_cn23_get_cd(struct platform_device *pdev) -{ - return !gpio_get_value(GPIO_PORT162); -} - -/* SDHI2 */ static struct sh_mobile_sdhi_info sdhi2_info = { .dma_slave_tx = SHDMA_SLAVE_SDHI2_TX, .dma_slave_rx = SHDMA_SLAVE_SDHI2_RX, - .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE, + .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_USE_GPIO_CD, .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ | MMC_CAP_NEEDS_POLL, - .get_cd = slot_cn23_get_cd, + .cd_gpio = 162, }; static struct resource sdhi2_resources[] = { - [0] = { + { .name = "SDHI2", .start = 0xe6870000, .end = 0xe68700ff, .flags = IORESOURCE_MEM, - }, - [1] = { - .name = SH_MOBILE_SDHI_IRQ_CARD_DETECT, - .start = evt2irq(0x1200), /* SDHI2_SDHI2I0 */ - .flags = IORESOURCE_IRQ, - }, - [2] = { + }, { .name = SH_MOBILE_SDHI_IRQ_SDCARD, .start = evt2irq(0x1220), /* SDHI2_SDHI2I1 */ .flags = IORESOURCE_IRQ, - }, - [3] = { + }, { .name = SH_MOBILE_SDHI_IRQ_SDIO, .start = evt2irq(0x1240), /* SDHI2_SDHI2I2 */ .flags = IORESOURCE_IRQ, @@ -1112,6 +1089,7 @@ static struct platform_device sdhi2_device = { }; /* SH_MMCIF */ +#if IS_ENABLED(CONFIG_MMC_SH_MMCIF) static struct resource sh_mmcif_resources[] = { [0] = { .name = "MMCIF", @@ -1133,11 +1111,12 @@ static struct resource sh_mmcif_resources[] = { static struct sh_mmcif_plat_data sh_mmcif_plat = { .sup_pclk = 0, - .ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA | MMC_CAP_NEEDS_POLL, - .get_cd = slot_cn7_get_cd, + .use_cd_gpio = true, + /* card detect pin for SD/MMC slot (CN7) */ + .cd_gpio = 41, .slave_id_tx = SHDMA_SLAVE_MMCIF_TX, .slave_id_rx = SHDMA_SLAVE_MMCIF_RX, }; @@ -1153,7 +1132,7 @@ static struct platform_device sh_mmcif_device = { .num_resources = ARRAY_SIZE(sh_mmcif_resources), .resource = sh_mmcif_resources, }; - +#endif static int mackerel_camera_add(struct soc_camera_device *icd); static void mackerel_camera_del(struct soc_camera_device *icd); @@ -1260,11 +1239,12 @@ static struct platform_device *mackerel_devices[] __initdata = { &fsi_hdmi_device, &nand_flash_device, &sdhi0_device, -#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE) +#if !IS_ENABLED(CONFIG_MMC_SH_MMCIF) &sdhi1_device, +#else + &sh_mmcif_device, #endif &sdhi2_device, - &sh_mmcif_device, &ceu_device, &mackerel_camera, &hdmi_device, @@ -1328,6 +1308,34 @@ static struct i2c_board_info i2c1_devices[] = { }, }; +static const struct pinctrl_map mackerel_pinctrl_map[] = { + /* SDHI0 */ + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372", + "sdhi0_data4", "sdhi0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372", + "sdhi0_ctrl", "sdhi0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372", + "sdhi0_wp", "sdhi0"), + /* SDHI1 */ +#if !IS_ENABLED(CONFIG_MMC_SH_MMCIF) + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh7372", + "sdhi1_data4", "sdhi1"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh7372", + "sdhi1_ctrl", "sdhi1"), +#else + /* MMCIF */ + PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh7372", + "mmc0_data8_0", "mmc0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh7372", + "mmc0_ctrl_0", "mmc0"), +#endif + /* SDHI2 */ + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-sh7372", + "sdhi2_data4", "sdhi2"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-sh7372", + "sdhi2_ctrl", "sdhi2"), +}; + #define GPIO_PORT9CR IOMEM(0xE6051009) #define GPIO_PORT10CR IOMEM(0xE605100A) #define GPIO_PORT167CR IOMEM(0xE60520A7) @@ -1344,10 +1352,11 @@ static void __init mackerel_init(void) { "A3SP", &usbhs0_device, }, { "A3SP", &usbhs1_device, }, { "A3SP", &nand_flash_device, }, - { "A3SP", &sh_mmcif_device, }, { "A3SP", &sdhi0_device, }, -#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE) +#if !IS_ENABLED(CONFIG_MMC_SH_MMCIF) { "A3SP", &sdhi1_device, }, +#else + { "A3SP", &sh_mmcif_device, }, #endif { "A3SP", &sdhi2_device, }, { "A4R", &ceu_device, }, @@ -1364,6 +1373,8 @@ static void __init mackerel_init(void) /* External clock source */ clk_set_rate(&sh7372_dv_clki_clk, 27000000); + pinctrl_register_mappings(mackerel_pinctrl_map, + ARRAY_SIZE(mackerel_pinctrl_map)); sh7372_pinmux_init(); /* enable SCIFA0 */ @@ -1403,9 +1414,9 @@ static void __init mackerel_init(void) gpio_request(GPIO_FN_LCDDCK, NULL); /* backlight, off by default */ - gpio_request_one(GPIO_PORT31, GPIOF_OUT_INIT_LOW, NULL); + gpio_request_one(31, GPIOF_OUT_INIT_LOW, NULL); - gpio_request_one(GPIO_PORT151, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */ + gpio_request_one(151, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */ /* USBHS0 */ gpio_request(GPIO_FN_VBUS0_0, NULL); @@ -1421,10 +1432,10 @@ static void __init mackerel_init(void) gpio_request(GPIO_FN_FSIAILR, NULL); gpio_request(GPIO_FN_FSIAISLD, NULL); gpio_request(GPIO_FN_FSIAOSLD, NULL); - gpio_request_one(GPIO_PORT161, GPIOF_OUT_INIT_LOW, NULL); /* slave */ + gpio_request_one(161, GPIOF_OUT_INIT_LOW, NULL); /* slave */ - gpio_request(GPIO_PORT9, NULL); - gpio_request(GPIO_PORT10, NULL); + gpio_request(9, NULL); + gpio_request(10, NULL); gpio_direction_none(GPIO_PORT9CR); /* FSIAOBT needs no direction */ gpio_direction_none(GPIO_PORT10CR); /* FSIAOLR needs no direction */ @@ -1453,53 +1464,9 @@ static void __init mackerel_init(void) gpio_request(GPIO_FN_IRQ21, NULL); irq_set_irq_type(IRQ21, IRQ_TYPE_LEVEL_HIGH); - /* enable SDHI0 */ - gpio_request(GPIO_FN_SDHIWP0, NULL); - gpio_request(GPIO_FN_SDHICMD0, NULL); - gpio_request(GPIO_FN_SDHICLK0, NULL); - gpio_request(GPIO_FN_SDHID0_3, NULL); - gpio_request(GPIO_FN_SDHID0_2, NULL); - gpio_request(GPIO_FN_SDHID0_1, NULL); - gpio_request(GPIO_FN_SDHID0_0, NULL); - /* SDHI0 PORT172 card-detect IRQ26 */ gpio_request(GPIO_FN_IRQ26_172, NULL); -#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE) - /* enable SDHI1 */ - gpio_request(GPIO_FN_SDHICMD1, NULL); - gpio_request(GPIO_FN_SDHICLK1, NULL); - gpio_request(GPIO_FN_SDHID1_3, NULL); - gpio_request(GPIO_FN_SDHID1_2, NULL); - gpio_request(GPIO_FN_SDHID1_1, NULL); - gpio_request(GPIO_FN_SDHID1_0, NULL); -#endif - /* card detect pin for MMC slot (CN7) */ - gpio_request_one(GPIO_PORT41, GPIOF_IN, NULL); - - /* enable SDHI2 */ - gpio_request(GPIO_FN_SDHICMD2, NULL); - gpio_request(GPIO_FN_SDHICLK2, NULL); - gpio_request(GPIO_FN_SDHID2_3, NULL); - gpio_request(GPIO_FN_SDHID2_2, NULL); - gpio_request(GPIO_FN_SDHID2_1, NULL); - gpio_request(GPIO_FN_SDHID2_0, NULL); - - /* card detect pin for microSD slot (CN23) */ - gpio_request_one(GPIO_PORT162, GPIOF_IN, NULL); - - /* MMCIF */ - gpio_request(GPIO_FN_MMCD0_0, NULL); - gpio_request(GPIO_FN_MMCD0_1, NULL); - gpio_request(GPIO_FN_MMCD0_2, NULL); - gpio_request(GPIO_FN_MMCD0_3, NULL); - gpio_request(GPIO_FN_MMCD0_4, NULL); - gpio_request(GPIO_FN_MMCD0_5, NULL); - gpio_request(GPIO_FN_MMCD0_6, NULL); - gpio_request(GPIO_FN_MMCD0_7, NULL); - gpio_request(GPIO_FN_MMCCMD0, NULL); - gpio_request(GPIO_FN_MMCCLK0, NULL); - /* FLCTL */ gpio_request(GPIO_FN_D0_NAF0, NULL); gpio_request(GPIO_FN_D1_NAF1, NULL); diff --git a/arch/arm/mach-shmobile/board-marzen-reference.c b/arch/arm/mach-shmobile/board-marzen-reference.c new file mode 100644 index 000000000000..480d882e42c7 --- /dev/null +++ b/arch/arm/mach-shmobile/board-marzen-reference.c @@ -0,0 +1,75 @@ +/* + * marzen board support - Reference DT implementation + * + * Copyright (C) 2011 Renesas Solutions Corp. + * Copyright (C) 2011 Magnus Damm + * Copyright (C) 2013 Simon Horman + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/pinctrl/machine.h> +#include <mach/r8a7779.h> +#include <mach/common.h> +#include <mach/irqs.h> +#include <asm/irq.h> +#include <asm/mach/arch.h> + +static const struct pinctrl_map marzen_pinctrl_map[] = { + /* SCIF2 (CN18: DEBUG0) */ + PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "pfc-r8a7779", + "scif2_data_c", "scif2"), + /* SCIF4 (CN19: DEBUG1) */ + PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-r8a7779", + "scif4_data", "scif4"), + /* SDHI0 */ + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779", + "sdhi0_data4", "sdhi0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779", + "sdhi0_ctrl", "sdhi0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779", + "sdhi0_cd", "sdhi0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779", + "sdhi0_wp", "sdhi0"), + /* SMSC */ + PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-r8a7779", + "intc_irq1_b", "intc"), + PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-r8a7779", + "lbsc_ex_cs0", "lbsc"), +}; + +static void __init marzen_init(void) +{ + pinctrl_register_mappings(marzen_pinctrl_map, + ARRAY_SIZE(marzen_pinctrl_map)); + r8a7779_pinmux_init(); + + r8a7779_add_standard_devices_dt(); +} + +static const char *marzen_boards_compat_dt[] __initdata = { + "renesas,marzen-reference", + NULL, +}; + +DT_MACHINE_START(MARZEN, "marzen") + .smp = smp_ops(r8a7779_smp_ops), + .map_io = r8a7779_map_io, + .init_early = r8a7779_init_delay, + .nr_irqs = NR_IRQS_LEGACY, + .init_irq = r8a7779_init_irq_dt, + .init_machine = marzen_init, + .init_time = shmobile_timer_init, + .dt_compat = marzen_boards_compat_dt, +MACHINE_END diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c index fec49ebc359a..91052855cc12 100644 --- a/arch/arm/mach-shmobile/board-marzen.c +++ b/arch/arm/mach-shmobile/board-marzen.c @@ -25,8 +25,9 @@ #include <linux/platform_device.h> #include <linux/delay.h> #include <linux/io.h> -#include <linux/gpio.h> +#include <linux/leds.h> #include <linux/dma-mapping.h> +#include <linux/pinctrl/machine.h> #include <linux/regulator/fixed.h> #include <linux/regulator/machine.h> #include <linux/smsc911x.h> @@ -67,7 +68,7 @@ static struct resource smsc911x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = gic_spi(28), /* IRQ 1 */ + .start = gic_iid(0x3c), /* IRQ 1 */ .flags = IORESOURCE_IRQ, }, }; @@ -97,7 +98,7 @@ static struct resource sdhi0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = gic_spi(104), + .start = gic_iid(0x88), .flags = IORESOURCE_IRQ, }, }; @@ -168,12 +169,43 @@ static struct platform_device usb_phy_device = { .num_resources = ARRAY_SIZE(usb_phy_resources), }; +/* LEDS */ +static struct gpio_led marzen_leds[] = { + { + .name = "led2", + .gpio = 157, + .default_state = LEDS_GPIO_DEFSTATE_ON, + }, { + .name = "led3", + .gpio = 158, + .default_state = LEDS_GPIO_DEFSTATE_ON, + }, { + .name = "led4", + .gpio = 159, + .default_state = LEDS_GPIO_DEFSTATE_ON, + }, +}; + +static struct gpio_led_platform_data marzen_leds_pdata = { + .leds = marzen_leds, + .num_leds = ARRAY_SIZE(marzen_leds), +}; + +static struct platform_device leds_device = { + .name = "leds-gpio", + .id = 0, + .dev = { + .platform_data = &marzen_leds_pdata, + }, +}; + static struct platform_device *marzen_devices[] __initdata = { ð_device, &sdhi0_device, &thermal_device, &hspi_device, &usb_phy_device, + &leds_device, }; /* USB */ @@ -215,7 +247,7 @@ static struct resource ehci0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = gic_spi(44), + .start = gic_iid(0x4c), .flags = IORESOURCE_IRQ, }, }; @@ -239,7 +271,7 @@ static struct resource ehci1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = gic_spi(45), + .start = gic_iid(0x4d), .flags = IORESOURCE_IRQ, }, }; @@ -269,7 +301,7 @@ static struct resource ohci0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = gic_spi(44), + .start = gic_iid(0x4c), .flags = IORESOURCE_IRQ, }, }; @@ -293,7 +325,7 @@ static struct resource ohci1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = gic_spi(45), + .start = gic_iid(0x4d), .flags = IORESOURCE_IRQ, }, }; @@ -327,6 +359,41 @@ void __init marzen_init_late(void) ARRAY_SIZE(marzen_late_devices)); } +static const struct pinctrl_map marzen_pinctrl_map[] = { + /* HSPI0 */ + PIN_MAP_MUX_GROUP_DEFAULT("sh-hspi.0", "pfc-r8a7779", + "hspi0", "hspi0"), + /* SCIF2 (CN18: DEBUG0) */ + PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "pfc-r8a7779", + "scif2_data_c", "scif2"), + /* SCIF4 (CN19: DEBUG1) */ + PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-r8a7779", + "scif4_data", "scif4"), + /* SDHI0 */ + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779", + "sdhi0_data4", "sdhi0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779", + "sdhi0_ctrl", "sdhi0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779", + "sdhi0_cd", "sdhi0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779", + "sdhi0_wp", "sdhi0"), + /* SMSC */ + PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-r8a7779", + "intc_irq1_b", "intc"), + PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-r8a7779", + "lbsc_ex_cs0", "lbsc"), + /* USB0 */ + PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform.0", "pfc-r8a7779", + "usb0", "usb0"), + /* USB1 */ + PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform.0", "pfc-r8a7779", + "usb1", "usb1"), + /* USB2 */ + PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform.1", "pfc-r8a7779", + "usb2", "usb2"), +}; + static void __init marzen_init(void) { regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers, @@ -334,44 +401,10 @@ static void __init marzen_init(void) regulator_register_fixed(1, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + pinctrl_register_mappings(marzen_pinctrl_map, + ARRAY_SIZE(marzen_pinctrl_map)); r8a7779_pinmux_init(); - /* SCIF2 (CN18: DEBUG0) */ - gpio_request(GPIO_FN_TX2_C, NULL); - gpio_request(GPIO_FN_RX2_C, NULL); - - /* SCIF4 (CN19: DEBUG1) */ - gpio_request(GPIO_FN_TX4, NULL); - gpio_request(GPIO_FN_RX4, NULL); - - /* LAN89218 */ - gpio_request(GPIO_FN_EX_CS0, NULL); /* nCS */ - gpio_request(GPIO_FN_IRQ1_B, NULL); /* IRQ + PME */ - - /* SD0 (CN20) */ - gpio_request(GPIO_FN_SD0_CLK, NULL); - gpio_request(GPIO_FN_SD0_CMD, NULL); - gpio_request(GPIO_FN_SD0_DAT0, NULL); - gpio_request(GPIO_FN_SD0_DAT1, NULL); - gpio_request(GPIO_FN_SD0_DAT2, NULL); - gpio_request(GPIO_FN_SD0_DAT3, NULL); - gpio_request(GPIO_FN_SD0_CD, NULL); - gpio_request(GPIO_FN_SD0_WP, NULL); - - /* HSPI 0 */ - gpio_request(GPIO_FN_HSPI_CLK0, NULL); - gpio_request(GPIO_FN_HSPI_CS0, NULL); - gpio_request(GPIO_FN_HSPI_TX0, NULL); - gpio_request(GPIO_FN_HSPI_RX0, NULL); - - /* USB (CN21) */ - gpio_request(GPIO_FN_USB_OVC0, NULL); - gpio_request(GPIO_FN_USB_OVC1, NULL); - gpio_request(GPIO_FN_USB_OVC2, NULL); - - /* USB (CN22) */ - gpio_request(GPIO_FN_USB_PENC2, NULL); - r8a7779_add_standard_devices(); platform_add_devices(marzen_devices, ARRAY_SIZE(marzen_devices)); } diff --git a/arch/arm/mach-shmobile/clock-r8a73a4.c b/arch/arm/mach-shmobile/clock-r8a73a4.c new file mode 100644 index 000000000000..e710c00c3822 --- /dev/null +++ b/arch/arm/mach-shmobile/clock-r8a73a4.c @@ -0,0 +1,115 @@ +/* + * r8a73a4 clock framework support + * + * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include <linux/init.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/sh_clk.h> +#include <linux/clkdev.h> +#include <mach/common.h> + +#define CPG_BASE 0xe6150000 +#define CPG_LEN 0x270 + +#define MPCKCR 0xe6150080 +#define SMSTPCR2 0xe6150138 +#define SMSTPCR5 0xe6150144 + +static struct clk_mapping cpg_mapping = { + .phys = CPG_BASE, + .len = CPG_LEN, +}; + +static struct clk extalr_clk = { + .rate = 32768, + .mapping = &cpg_mapping, +}; + +static struct clk extal1_clk = { + .rate = 26000000, + .mapping = &cpg_mapping, +}; + +static struct clk extal2_clk = { + .rate = 48000000, + .mapping = &cpg_mapping, +}; + +static struct clk *main_clks[] = { + &extalr_clk, + &extal1_clk, + &extal2_clk, +}; + +enum { + MSTP217, MSTP216, MSTP207, MSTP206, MSTP204, MSTP203, + MSTP522, + MSTP_NR +}; + +static struct clk mstp_clks[MSTP_NR] = { + [MSTP204] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 4, 0), /* SCIFA0 */ + [MSTP203] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 3, 0), /* SCIFA1 */ + [MSTP206] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 6, 0), /* SCIFB0 */ + [MSTP207] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 7, 0), /* SCIFB1 */ + [MSTP216] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 16, 0), /* SCIFB2 */ + [MSTP217] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 17, 0), /* SCIFB3 */ + [MSTP522] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR5, 22, 0), /* Thermal */ +}; + +static struct clk_lookup lookups[] = { + CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), + CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), + CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP206]), + CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP207]), + CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP216]), + CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP217]), + CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]), + + /* for DT */ + CLKDEV_DEV_ID("e61f0000.thermal", &mstp_clks[MSTP522]), +}; + +void __init r8a73a4_clock_init(void) +{ + void __iomem *cpg_base, *reg; + int k, ret = 0; + + /* fix MPCLK to EXTAL2 for now. + * this is needed until more detailed clock topology is supported + */ + cpg_base = ioremap_nocache(CPG_BASE, CPG_LEN); + BUG_ON(!cpg_base); + reg = cpg_base + (MPCKCR - CPG_BASE); + iowrite32(ioread32(reg) | 1 << 7 | 0x0c, reg); /* set CKSEL */ + iounmap(cpg_base); + + for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++) + ret = clk_register(main_clks[k]); + + if (!ret) + ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); + + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); + + if (!ret) + shmobile_clk_init(); + else + panic("failed to setup r8a73a4 clocks\n"); +} diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c index 19ce885a3b43..c0d39aa6de50 100644 --- a/arch/arm/mach-shmobile/clock-r8a7740.c +++ b/arch/arm/mach-shmobile/clock-r8a7740.c @@ -22,6 +22,7 @@ #include <linux/io.h> #include <linux/sh_clk.h> #include <linux/clkdev.h> +#include <mach/clock.h> #include <mach/common.h> #include <mach/r8a7740.h> @@ -97,42 +98,13 @@ static struct clk dv_clk = { .rate = 27000000, }; -static unsigned long div_recalc(struct clk *clk) -{ - return clk->parent->rate / (int)(clk->priv); -} - -static struct sh_clk_ops div_clk_ops = { - .recalc = div_recalc, -}; - -/* extal1 / 2 */ -static struct clk extal1_div2_clk = { - .ops = &div_clk_ops, - .priv = (void *)2, - .parent = &extal1_clk, -}; - -/* extal1 / 1024 */ -static struct clk extal1_div1024_clk = { - .ops = &div_clk_ops, - .priv = (void *)1024, - .parent = &extal1_clk, -}; - -/* extal1 / 2 / 1024 */ -static struct clk extal1_div2048_clk = { - .ops = &div_clk_ops, - .priv = (void *)1024, - .parent = &extal1_div2_clk, -}; +SH_CLK_RATIO(div2, 1, 2); +SH_CLK_RATIO(div1k, 1, 1024); -/* extal2 / 2 */ -static struct clk extal2_div2_clk = { - .ops = &div_clk_ops, - .priv = (void *)2, - .parent = &extal2_clk, -}; +SH_FIXED_RATIO_CLK(extal1_div2_clk, extal1_clk, div2); +SH_FIXED_RATIO_CLK(extal1_div1024_clk, extal1_clk, div1k); +SH_FIXED_RATIO_CLK(extal1_div2048_clk, extal1_div2_clk, div1k); +SH_FIXED_RATIO_CLK(extal2_div2_clk, extal2_clk, div2); static struct sh_clk_ops followparent_clk_ops = { .recalc = followparent_recalc, @@ -143,11 +115,7 @@ static struct clk system_clk = { .ops = &followparent_clk_ops, }; -static struct clk system_div2_clk = { - .ops = &div_clk_ops, - .priv = (void *)2, - .parent = &system_clk, -}; +SH_FIXED_RATIO_CLK(system_div2_clk, system_clk, div2); /* r_clk */ static struct clk r_clk = { @@ -184,11 +152,7 @@ static struct clk pllc1_clk = { }; /* PLLC1 / 2 */ -static struct clk pllc1_div2_clk = { - .ops = &div_clk_ops, - .priv = (void *)2, - .parent = &pllc1_clk, -}; +SH_FIXED_RATIO_CLK(pllc1_div2_clk, pllc1_clk, div2); /* USB clock */ /* @@ -323,6 +287,7 @@ struct clk *main_clks[] = { &fsibck_clk, }; +/* DIV4 clocks */ static void div4_kick(struct clk *clk) { unsigned long value; @@ -346,6 +311,26 @@ static struct clk_div4_table div4_table = { .kick = div4_kick, }; +enum { + DIV4_I, DIV4_ZG, DIV4_B, DIV4_M1, DIV4_HP, + DIV4_HPP, DIV4_USBP, DIV4_S, DIV4_ZB, DIV4_M3, DIV4_CP, + DIV4_NR +}; + +struct clk div4_clks[DIV4_NR] = { + [DIV4_I] = SH_CLK_DIV4(&pllc1_clk, FRQCRA, 20, 0x6fff, CLK_ENABLE_ON_INIT), + [DIV4_ZG] = SH_CLK_DIV4(&pllc1_clk, FRQCRA, 16, 0x6fff, CLK_ENABLE_ON_INIT), + [DIV4_B] = SH_CLK_DIV4(&pllc1_clk, FRQCRA, 8, 0x6fff, CLK_ENABLE_ON_INIT), + [DIV4_M1] = SH_CLK_DIV4(&pllc1_clk, FRQCRA, 4, 0x6fff, CLK_ENABLE_ON_INIT), + [DIV4_HP] = SH_CLK_DIV4(&pllc1_clk, FRQCRB, 4, 0x6fff, 0), + [DIV4_HPP] = SH_CLK_DIV4(&pllc1_clk, FRQCRC, 20, 0x6fff, 0), + [DIV4_USBP] = SH_CLK_DIV4(&pllc1_clk, FRQCRC, 16, 0x6fff, 0), + [DIV4_S] = SH_CLK_DIV4(&pllc1_clk, FRQCRC, 12, 0x6fff, 0), + [DIV4_ZB] = SH_CLK_DIV4(&pllc1_clk, FRQCRC, 8, 0x6fff, 0), + [DIV4_M3] = SH_CLK_DIV4(&pllc1_clk, FRQCRC, 4, 0x6fff, 0), + [DIV4_CP] = SH_CLK_DIV4(&pllc1_clk, FRQCRC, 0, 0x6fff, 0), +}; + /* DIV6 reparent */ enum { DIV6_HDMI, @@ -391,6 +376,16 @@ static struct clk div6_reparent_clks[DIV6_REPARENT_NR] = { fsib_parents, ARRAY_SIZE(fsib_parents), 6, 2), }; +/* DIV6 clocks */ +enum { + DIV6_SUB, + DIV6_NR +}; + +static struct clk div6_clks[DIV6_NR] = { + [DIV6_SUB] = SH_CLK_DIV6(&pllc1_div2_clk, SUBCKCR, 0), +}; + /* HDMI1/2 clock */ static unsigned long hdmi12_recalc(struct clk *clk) { @@ -456,35 +451,6 @@ static struct clk fsidivs[] = { /* MSTP */ enum { - DIV4_I, DIV4_ZG, DIV4_B, DIV4_M1, DIV4_HP, - DIV4_HPP, DIV4_USBP, DIV4_S, DIV4_ZB, DIV4_M3, DIV4_CP, - DIV4_NR -}; - -struct clk div4_clks[DIV4_NR] = { - [DIV4_I] = SH_CLK_DIV4(&pllc1_clk, FRQCRA, 20, 0x6fff, CLK_ENABLE_ON_INIT), - [DIV4_ZG] = SH_CLK_DIV4(&pllc1_clk, FRQCRA, 16, 0x6fff, CLK_ENABLE_ON_INIT), - [DIV4_B] = SH_CLK_DIV4(&pllc1_clk, FRQCRA, 8, 0x6fff, CLK_ENABLE_ON_INIT), - [DIV4_M1] = SH_CLK_DIV4(&pllc1_clk, FRQCRA, 4, 0x6fff, CLK_ENABLE_ON_INIT), - [DIV4_HP] = SH_CLK_DIV4(&pllc1_clk, FRQCRB, 4, 0x6fff, 0), - [DIV4_HPP] = SH_CLK_DIV4(&pllc1_clk, FRQCRC, 20, 0x6fff, 0), - [DIV4_USBP] = SH_CLK_DIV4(&pllc1_clk, FRQCRC, 16, 0x6fff, 0), - [DIV4_S] = SH_CLK_DIV4(&pllc1_clk, FRQCRC, 12, 0x6fff, 0), - [DIV4_ZB] = SH_CLK_DIV4(&pllc1_clk, FRQCRC, 8, 0x6fff, 0), - [DIV4_M3] = SH_CLK_DIV4(&pllc1_clk, FRQCRC, 4, 0x6fff, 0), - [DIV4_CP] = SH_CLK_DIV4(&pllc1_clk, FRQCRC, 0, 0x6fff, 0), -}; - -enum { - DIV6_SUB, - DIV6_NR -}; - -static struct clk div6_clks[DIV6_NR] = { - [DIV6_SUB] = SH_CLK_DIV6(&pllc1_div2_clk, SUBCKCR, 0), -}; - -enum { MSTP128, MSTP127, MSTP125, MSTP116, MSTP111, MSTP100, MSTP117, @@ -593,29 +559,42 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh_mobile_ceu.1", &mstp_clks[MSTP128]), CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]), + CLKDEV_DEV_ID("e6c80000.sci", &mstp_clks[MSTP200]), CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP201]), + CLKDEV_DEV_ID("e6c70000.sci", &mstp_clks[MSTP201]), CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP202]), + CLKDEV_DEV_ID("e6c60000.sci", &mstp_clks[MSTP202]), CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), + CLKDEV_DEV_ID("e6c50000.sci", &mstp_clks[MSTP203]), CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), + CLKDEV_DEV_ID("e6c40000.sci", &mstp_clks[MSTP204]), CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP206]), + CLKDEV_DEV_ID("e6c30000.sci", &mstp_clks[MSTP206]), CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), + CLKDEV_DEV_ID("e6cb0000.sci", &mstp_clks[MSTP207]), CLKDEV_DEV_ID("sh-dma-engine.3", &mstp_clks[MSTP214]), CLKDEV_DEV_ID("sh-dma-engine.2", &mstp_clks[MSTP216]), CLKDEV_DEV_ID("sh-dma-engine.1", &mstp_clks[MSTP217]), CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]), CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP222]), + CLKDEV_DEV_ID("e6cd0000.sci", &mstp_clks[MSTP222]), CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP230]), + CLKDEV_DEV_ID("e6cc0000.sci", &mstp_clks[MSTP230]), CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), CLKDEV_DEV_ID("renesas_usbhs", &mstp_clks[MSTP320]), CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), + CLKDEV_DEV_ID("e6850000.sdhi", &mstp_clks[MSTP314]), CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), + CLKDEV_DEV_ID("e6860000.sdhi", &mstp_clks[MSTP313]), CLKDEV_DEV_ID("sh_mmcif", &mstp_clks[MSTP312]), + CLKDEV_DEV_ID("e6bd0000.mmcif", &mstp_clks[MSTP312]), CLKDEV_DEV_ID("sh-eth", &mstp_clks[MSTP309]), CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP415]), + CLKDEV_DEV_ID("e6870000.sdhi", &mstp_clks[MSTP415]), /* ICK */ CLKDEV_ICK_ID("host", "renesas_usbhs", &mstp_clks[MSTP416]), diff --git a/arch/arm/mach-shmobile/clock-r8a7778.c b/arch/arm/mach-shmobile/clock-r8a7778.c new file mode 100644 index 000000000000..cd6855290b1f --- /dev/null +++ b/arch/arm/mach-shmobile/clock-r8a7778.c @@ -0,0 +1,107 @@ +/* + * r8a7778 clock framework support + * + * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> + * + * based on r8a7779 + * + * Copyright (C) 2011 Renesas Solutions Corp. + * Copyright (C) 2011 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/io.h> +#include <linux/sh_clk.h> +#include <linux/clkdev.h> +#include <mach/common.h> + +#define MSTPCR0 IOMEM(0xffc80030) +#define MSTPCR1 IOMEM(0xffc80034) +#define MSTPCR3 IOMEM(0xffc8003c) +#define MSTPSR1 IOMEM(0xffc80044) +#define MSTPSR4 IOMEM(0xffc80048) +#define MSTPSR6 IOMEM(0xffc8004c) +#define MSTPCR4 IOMEM(0xffc80050) +#define MSTPCR5 IOMEM(0xffc80054) +#define MSTPCR6 IOMEM(0xffc80058) + +/* ioremap() through clock mapping mandatory to avoid + * collision with ARM coherent DMA virtual memory range. + */ + +static struct clk_mapping cpg_mapping = { + .phys = 0xffc80000, + .len = 0x80, +}; + +static struct clk clkp = { + .rate = 62500000, /* FIXME: shortcut */ + .flags = CLK_ENABLE_ON_INIT, + .mapping = &cpg_mapping, +}; + +static struct clk *main_clks[] = { + &clkp, +}; + +enum { + MSTP114, + MSTP026, MSTP025, MSTP024, MSTP023, MSTP022, MSTP021, + MSTP016, MSTP015, + MSTP_NR }; + +static struct clk mstp_clks[MSTP_NR] = { + [MSTP114] = SH_CLK_MSTP32(&clkp, MSTPCR1, 14, 0), /* Ether */ + [MSTP026] = SH_CLK_MSTP32(&clkp, MSTPCR0, 26, 0), /* SCIF0 */ + [MSTP025] = SH_CLK_MSTP32(&clkp, MSTPCR0, 25, 0), /* SCIF1 */ + [MSTP024] = SH_CLK_MSTP32(&clkp, MSTPCR0, 24, 0), /* SCIF2 */ + [MSTP023] = SH_CLK_MSTP32(&clkp, MSTPCR0, 23, 0), /* SCIF3 */ + [MSTP022] = SH_CLK_MSTP32(&clkp, MSTPCR0, 22, 0), /* SCIF4 */ + [MSTP021] = SH_CLK_MSTP32(&clkp, MSTPCR0, 21, 0), /* SCIF5 */ + [MSTP016] = SH_CLK_MSTP32(&clkp, MSTPCR0, 16, 0), /* TMU0 */ + [MSTP015] = SH_CLK_MSTP32(&clkp, MSTPCR0, 15, 0), /* TMU1 */ +}; + +static struct clk_lookup lookups[] = { + /* MSTP32 clocks */ + CLKDEV_DEV_ID("sh-eth", &mstp_clks[MSTP114]), /* Ether */ + CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP026]), /* SCIF0 */ + CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP025]), /* SCIF1 */ + CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP024]), /* SCIF2 */ + CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP023]), /* SCIF3 */ + CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP022]), /* SCIF4 */ + CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP021]), /* SCIF6 */ + CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP016]), /* TMU00 */ + CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP015]), /* TMU01 */ +}; + +void __init r8a7778_clock_init(void) +{ + int k, ret = 0; + + for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++) + ret = clk_register(main_clks[k]); + + if (!ret) + ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); + + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); + + if (!ret) + shmobile_clk_init(); + else + panic("failed to setup r8a7778 clocks\n"); +} diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c index 1db36537255c..31d5cd4d9787 100644 --- a/arch/arm/mach-shmobile/clock-r8a7779.c +++ b/arch/arm/mach-shmobile/clock-r8a7779.c @@ -17,13 +17,36 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +#include <linux/bitops.h> #include <linux/init.h> #include <linux/kernel.h> #include <linux/io.h> #include <linux/sh_clk.h> #include <linux/clkdev.h> +#include <mach/clock.h> #include <mach/common.h> +/* + * MD1 = 1 MD1 = 0 + * (PLLA = 1500) (PLLA = 1600) + * (MHz) (MHz) + *------------------------------------------------+-------------------- + * clkz 1000 (2/3) 800 (1/2) + * clkzs 250 (1/6) 200 (1/8) + * clki 750 (1/2) 800 (1/2) + * clks 250 (1/6) 200 (1/8) + * clks1 125 (1/12) 100 (1/16) + * clks3 187.5 (1/8) 200 (1/8) + * clks4 93.7 (1/16) 100 (1/16) + * clkp 62.5 (1/24) 50 (1/32) + * clkg 62.5 (1/24) 66.6 (1/24) + * clkb, CLKOUT + * (MD2 = 0) 62.5 (1/24) 66.6 (1/24) + * (MD2 = 1) 41.6 (1/36) 50 (1/32) +*/ + +#define MD(nr) BIT(nr) + #define FRQMR IOMEM(0xffc80014) #define MSTPCR0 IOMEM(0xffc80030) #define MSTPCR1 IOMEM(0xffc80034) @@ -36,6 +59,9 @@ #define MSTPCR6 IOMEM(0xffc80058) #define MSTPCR7 IOMEM(0xffc80040) +#define MODEMR 0xffcc0020 + + /* ioremap() through clock mapping mandatory to avoid * collision with ARM coherent DMA virtual memory range. */ @@ -50,44 +76,44 @@ static struct clk_mapping cpg_mapping = { * from the platform code. */ static struct clk plla_clk = { - .rate = 1500000000, + /* .rate will be updated on r8a7779_clock_init() */ .mapping = &cpg_mapping, }; +/* + * clock ratio of these clock will be updated + * on r8a7779_clock_init() + */ +SH_FIXED_RATIO_CLK_SET(clkz_clk, plla_clk, 1, 1); +SH_FIXED_RATIO_CLK_SET(clkzs_clk, plla_clk, 1, 1); +SH_FIXED_RATIO_CLK_SET(clki_clk, plla_clk, 1, 1); +SH_FIXED_RATIO_CLK_SET(clks_clk, plla_clk, 1, 1); +SH_FIXED_RATIO_CLK_SET(clks1_clk, plla_clk, 1, 1); +SH_FIXED_RATIO_CLK_SET(clks3_clk, plla_clk, 1, 1); +SH_FIXED_RATIO_CLK_SET(clks4_clk, plla_clk, 1, 1); +SH_FIXED_RATIO_CLK_SET(clkb_clk, plla_clk, 1, 1); +SH_FIXED_RATIO_CLK_SET(clkout_clk, plla_clk, 1, 1); +SH_FIXED_RATIO_CLK_SET(clkp_clk, plla_clk, 1, 1); +SH_FIXED_RATIO_CLK_SET(clkg_clk, plla_clk, 1, 1); + static struct clk *main_clks[] = { &plla_clk, -}; - -static int divisors[] = { 0, 0, 0, 6, 8, 12, 16, 0, 24, 32, 36, 0, 0, 0, 0, 0 }; - -static struct clk_div_mult_table div4_div_mult_table = { - .divisors = divisors, - .nr_divisors = ARRAY_SIZE(divisors), -}; - -static struct clk_div4_table div4_table = { - .div_mult_table = &div4_div_mult_table, -}; - -enum { DIV4_S, DIV4_OUT, DIV4_S4, DIV4_S3, DIV4_S1, DIV4_P, DIV4_NR }; - -static struct clk div4_clks[DIV4_NR] = { - [DIV4_S] = SH_CLK_DIV4(&plla_clk, FRQMR, 20, - 0x0018, CLK_ENABLE_ON_INIT), - [DIV4_OUT] = SH_CLK_DIV4(&plla_clk, FRQMR, 16, - 0x0700, CLK_ENABLE_ON_INIT), - [DIV4_S4] = SH_CLK_DIV4(&plla_clk, FRQMR, 12, - 0x0040, CLK_ENABLE_ON_INIT), - [DIV4_S3] = SH_CLK_DIV4(&plla_clk, FRQMR, 8, - 0x0010, CLK_ENABLE_ON_INIT), - [DIV4_S1] = SH_CLK_DIV4(&plla_clk, FRQMR, 4, - 0x0060, CLK_ENABLE_ON_INIT), - [DIV4_P] = SH_CLK_DIV4(&plla_clk, FRQMR, 0, - 0x0300, CLK_ENABLE_ON_INIT), + &clkz_clk, + &clkzs_clk, + &clki_clk, + &clks_clk, + &clks1_clk, + &clks3_clk, + &clks4_clk, + &clkb_clk, + &clkout_clk, + &clkp_clk, + &clkg_clk, }; enum { MSTP323, MSTP322, MSTP321, MSTP320, - MSTP101, MSTP100, + MSTP115, MSTP114, + MSTP103, MSTP101, MSTP100, MSTP030, MSTP029, MSTP028, MSTP027, MSTP026, MSTP025, MSTP024, MSTP023, MSTP022, MSTP021, MSTP016, MSTP015, MSTP014, @@ -95,50 +121,29 @@ enum { MSTP323, MSTP322, MSTP321, MSTP320, MSTP_NR }; static struct clk mstp_clks[MSTP_NR] = { - [MSTP323] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 23, 0), /* SDHI0 */ - [MSTP322] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 22, 0), /* SDHI1 */ - [MSTP321] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 21, 0), /* SDHI2 */ - [MSTP320] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 20, 0), /* SDHI3 */ - [MSTP101] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 1, 0), /* USB2 */ - [MSTP100] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 0, 0), /* USB0/1 */ - [MSTP030] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 30, 0), /* I2C0 */ - [MSTP029] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 29, 0), /* I2C1 */ - [MSTP028] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 28, 0), /* I2C2 */ - [MSTP027] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 27, 0), /* I2C3 */ - [MSTP026] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 26, 0), /* SCIF0 */ - [MSTP025] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 25, 0), /* SCIF1 */ - [MSTP024] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 24, 0), /* SCIF2 */ - [MSTP023] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 23, 0), /* SCIF3 */ - [MSTP022] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 22, 0), /* SCIF4 */ - [MSTP021] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 21, 0), /* SCIF5 */ - [MSTP016] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 16, 0), /* TMU0 */ - [MSTP015] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 15, 0), /* TMU1 */ - [MSTP014] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 14, 0), /* TMU2 */ - [MSTP007] = SH_CLK_MSTP32(&div4_clks[DIV4_S], MSTPCR0, 7, 0), /* HSPI */ -}; - -static unsigned long mul4_recalc(struct clk *clk) -{ - return clk->parent->rate * 4; -} - -static struct sh_clk_ops mul4_clk_ops = { - .recalc = mul4_recalc, -}; - -struct clk clkz_clk = { - .ops = &mul4_clk_ops, - .parent = &div4_clks[DIV4_S], -}; - -struct clk clkzs_clk = { - /* clks x 4 / 4 = clks */ - .parent = &div4_clks[DIV4_S], -}; - -static struct clk *late_main_clks[] = { - &clkz_clk, - &clkzs_clk, + [MSTP323] = SH_CLK_MSTP32(&clkp_clk, MSTPCR3, 23, 0), /* SDHI0 */ + [MSTP322] = SH_CLK_MSTP32(&clkp_clk, MSTPCR3, 22, 0), /* SDHI1 */ + [MSTP321] = SH_CLK_MSTP32(&clkp_clk, MSTPCR3, 21, 0), /* SDHI2 */ + [MSTP320] = SH_CLK_MSTP32(&clkp_clk, MSTPCR3, 20, 0), /* SDHI3 */ + [MSTP115] = SH_CLK_MSTP32(&clkp_clk, MSTPCR1, 15, 0), /* SATA */ + [MSTP114] = SH_CLK_MSTP32(&clkp_clk, MSTPCR1, 14, 0), /* Ether */ + [MSTP103] = SH_CLK_MSTP32(&clks_clk, MSTPCR1, 3, 0), /* DU */ + [MSTP101] = SH_CLK_MSTP32(&clkp_clk, MSTPCR1, 1, 0), /* USB2 */ + [MSTP100] = SH_CLK_MSTP32(&clkp_clk, MSTPCR1, 0, 0), /* USB0/1 */ + [MSTP030] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 30, 0), /* I2C0 */ + [MSTP029] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 29, 0), /* I2C1 */ + [MSTP028] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 28, 0), /* I2C2 */ + [MSTP027] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 27, 0), /* I2C3 */ + [MSTP026] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 26, 0), /* SCIF0 */ + [MSTP025] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 25, 0), /* SCIF1 */ + [MSTP024] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 24, 0), /* SCIF2 */ + [MSTP023] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 23, 0), /* SCIF3 */ + [MSTP022] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 22, 0), /* SCIF4 */ + [MSTP021] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 21, 0), /* SCIF5 */ + [MSTP016] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 16, 0), /* TMU0 */ + [MSTP015] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 15, 0), /* TMU1 */ + [MSTP014] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 14, 0), /* TMU2 */ + [MSTP007] = SH_CLK_MSTP32(&clks_clk, MSTPCR0, 7, 0), /* HSPI */ }; static struct clk_lookup lookups[] = { @@ -148,14 +153,17 @@ static struct clk_lookup lookups[] = { CLKDEV_CON_ID("clkzs_clk", &clkzs_clk), /* DIV4 clocks */ - CLKDEV_CON_ID("shyway_clk", &div4_clks[DIV4_S]), - CLKDEV_CON_ID("bus_clk", &div4_clks[DIV4_OUT]), - CLKDEV_CON_ID("shyway4_clk", &div4_clks[DIV4_S4]), - CLKDEV_CON_ID("shyway3_clk", &div4_clks[DIV4_S3]), - CLKDEV_CON_ID("shyway1_clk", &div4_clks[DIV4_S1]), - CLKDEV_CON_ID("peripheral_clk", &div4_clks[DIV4_P]), + CLKDEV_CON_ID("shyway_clk", &clks_clk), + CLKDEV_CON_ID("bus_clk", &clkout_clk), + CLKDEV_CON_ID("shyway4_clk", &clks4_clk), + CLKDEV_CON_ID("shyway3_clk", &clks3_clk), + CLKDEV_CON_ID("shyway1_clk", &clks1_clk), + CLKDEV_CON_ID("peripheral_clk", &clkp_clk), /* MSTP32 clocks */ + CLKDEV_DEV_ID("sata_rcar", &mstp_clks[MSTP115]), /* SATA */ + CLKDEV_DEV_ID("fc600000.sata", &mstp_clks[MSTP115]), /* SATA w/DT */ + CLKDEV_DEV_ID("sh-eth", &mstp_clks[MSTP114]), /* Ether */ CLKDEV_DEV_ID("ehci-platform.1", &mstp_clks[MSTP101]), /* USB EHCI port2 */ CLKDEV_DEV_ID("ohci-platform.1", &mstp_clks[MSTP101]), /* USB OHCI port2 */ CLKDEV_DEV_ID("ehci-platform.0", &mstp_clks[MSTP100]), /* USB EHCI port0/1 */ @@ -180,24 +188,65 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP322]), /* SDHI1 */ CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP321]), /* SDHI2 */ CLKDEV_DEV_ID("sh_mobile_sdhi.3", &mstp_clks[MSTP320]), /* SDHI3 */ + CLKDEV_DEV_ID("rcar-du.0", &mstp_clks[MSTP103]), /* DU */ }; void __init r8a7779_clock_init(void) { + void __iomem *modemr = ioremap_nocache(MODEMR, PAGE_SIZE); + u32 mode; int k, ret = 0; + BUG_ON(!modemr); + mode = ioread32(modemr); + iounmap(modemr); + + if (mode & MD(1)) { + plla_clk.rate = 1500000000; + + SH_CLK_SET_RATIO(&clkz_clk_ratio, 2, 3); + SH_CLK_SET_RATIO(&clkzs_clk_ratio, 1, 6); + SH_CLK_SET_RATIO(&clki_clk_ratio, 1, 2); + SH_CLK_SET_RATIO(&clks_clk_ratio, 1, 6); + SH_CLK_SET_RATIO(&clks1_clk_ratio, 1, 12); + SH_CLK_SET_RATIO(&clks3_clk_ratio, 1, 8); + SH_CLK_SET_RATIO(&clks4_clk_ratio, 1, 16); + SH_CLK_SET_RATIO(&clkp_clk_ratio, 1, 24); + SH_CLK_SET_RATIO(&clkg_clk_ratio, 1, 24); + if (mode & MD(2)) { + SH_CLK_SET_RATIO(&clkb_clk_ratio, 1, 36); + SH_CLK_SET_RATIO(&clkout_clk_ratio, 1, 36); + } else { + SH_CLK_SET_RATIO(&clkb_clk_ratio, 1, 24); + SH_CLK_SET_RATIO(&clkout_clk_ratio, 1, 24); + } + } else { + plla_clk.rate = 1600000000; + + SH_CLK_SET_RATIO(&clkz_clk_ratio, 1, 2); + SH_CLK_SET_RATIO(&clkzs_clk_ratio, 1, 8); + SH_CLK_SET_RATIO(&clki_clk_ratio, 1, 2); + SH_CLK_SET_RATIO(&clks_clk_ratio, 1, 8); + SH_CLK_SET_RATIO(&clks1_clk_ratio, 1, 16); + SH_CLK_SET_RATIO(&clks3_clk_ratio, 1, 8); + SH_CLK_SET_RATIO(&clks4_clk_ratio, 1, 16); + SH_CLK_SET_RATIO(&clkp_clk_ratio, 1, 32); + SH_CLK_SET_RATIO(&clkg_clk_ratio, 1, 24); + if (mode & MD(2)) { + SH_CLK_SET_RATIO(&clkb_clk_ratio, 1, 32); + SH_CLK_SET_RATIO(&clkout_clk_ratio, 1, 32); + } else { + SH_CLK_SET_RATIO(&clkb_clk_ratio, 1, 24); + SH_CLK_SET_RATIO(&clkout_clk_ratio, 1, 24); + } + } + for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++) ret = clk_register(main_clks[k]); if (!ret) - ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table); - - if (!ret) ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); - for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++) - ret = clk_register(late_main_clks[k]); - clkdev_add_table(lookups, ARRAY_SIZE(lookups)); if (!ret) diff --git a/arch/arm/mach-shmobile/clock-r8a7790.c b/arch/arm/mach-shmobile/clock-r8a7790.c new file mode 100644 index 000000000000..bad9bf2e34d6 --- /dev/null +++ b/arch/arm/mach-shmobile/clock-r8a7790.c @@ -0,0 +1,93 @@ +/* + * r8a7790 clock framework support + * + * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include <linux/init.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/sh_clk.h> +#include <linux/clkdev.h> +#include <mach/common.h> + +#define CPG_BASE 0xe6150000 +#define CPG_LEN 0x1000 + +#define SMSTPCR2 0xe6150138 +#define SMSTPCR7 0xe615014c + +static struct clk_mapping cpg_mapping = { + .phys = CPG_BASE, + .len = CPG_LEN, +}; + +static struct clk p_clk = { + .rate = 65000000, /* shortcut for now */ + .mapping = &cpg_mapping, +}; + +static struct clk mp_clk = { + .rate = 52000000, /* shortcut for now */ + .mapping = &cpg_mapping, +}; + +static struct clk *main_clks[] = { + &p_clk, + &mp_clk, +}; + +enum { MSTP721, MSTP720, + MSTP216, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP_NR }; +static struct clk mstp_clks[MSTP_NR] = { + [MSTP721] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 21, 0), /* SCIF0 */ + [MSTP720] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 20, 0), /* SCIF1 */ + [MSTP216] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 16, 0), /* SCIFB2 */ + [MSTP207] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 7, 0), /* SCIFB1 */ + [MSTP206] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 6, 0), /* SCIFB0 */ + [MSTP204] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 4, 0), /* SCIFA0 */ + [MSTP203] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 3, 0), /* SCIFA1 */ + [MSTP202] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 2, 0), /* SCIFA2 */ +}; + +static struct clk_lookup lookups[] = { + CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), + CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), + CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP206]), + CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP207]), + CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP216]), + CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP202]), + CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP721]), + CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP720]), +}; + +void __init r8a7790_clock_init(void) +{ + int k, ret = 0; + + for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++) + ret = clk_register(main_clks[k]); + + if (!ret) + ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); + + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); + + if (!ret) + shmobile_clk_init(); + else + panic("failed to setup r8a7790 clocks\n"); +} diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c index 45d21fe317f4..7e105932c09d 100644 --- a/arch/arm/mach-shmobile/clock-sh7372.c +++ b/arch/arm/mach-shmobile/clock-sh7372.c @@ -21,6 +21,7 @@ #include <linux/io.h> #include <linux/sh_clk.h> #include <linux/clkdev.h> +#include <mach/clock.h> #include <mach/common.h> /* SH7372 registers */ @@ -83,39 +84,12 @@ struct clk sh7372_extal2_clk = { .rate = 48000000, }; -/* A fixed divide-by-2 block */ -static unsigned long div2_recalc(struct clk *clk) -{ - return clk->parent->rate / 2; -} - -static struct sh_clk_ops div2_clk_ops = { - .recalc = div2_recalc, -}; +SH_CLK_RATIO(div2, 1, 2); -/* Divide dv_clki by two */ -struct clk sh7372_dv_clki_div2_clk = { - .ops = &div2_clk_ops, - .parent = &sh7372_dv_clki_clk, -}; - -/* Divide extal1 by two */ -static struct clk extal1_div2_clk = { - .ops = &div2_clk_ops, - .parent = &sh7372_extal1_clk, -}; - -/* Divide extal2 by two */ -static struct clk extal2_div2_clk = { - .ops = &div2_clk_ops, - .parent = &sh7372_extal2_clk, -}; - -/* Divide extal2 by four */ -static struct clk extal2_div4_clk = { - .ops = &div2_clk_ops, - .parent = &extal2_div2_clk, -}; +SH_FIXED_RATIO_CLKg(sh7372_dv_clki_div2_clk, sh7372_dv_clki_clk, div2); +SH_FIXED_RATIO_CLK(extal1_div2_clk, sh7372_extal1_clk, div2); +SH_FIXED_RATIO_CLK(extal2_div2_clk, sh7372_extal2_clk, div2); +SH_FIXED_RATIO_CLK(extal2_div4_clk, extal2_div2_clk, div2); /* PLLC0 and PLLC1 */ static unsigned long pllc01_recalc(struct clk *clk) @@ -147,10 +121,7 @@ static struct clk pllc1_clk = { }; /* Divide PLLC1 by two */ -static struct clk pllc1_div2_clk = { - .ops = &div2_clk_ops, - .parent = &pllc1_clk, -}; +SH_FIXED_RATIO_CLK(pllc1_div2_clk, pllc1_clk, div2); /* PLLC2 */ @@ -342,7 +313,7 @@ static struct clk_div4_table div4_table = { }; enum { DIV4_I, DIV4_ZG, DIV4_B, DIV4_M1, DIV4_CSIR, - DIV4_ZTR, DIV4_ZT, DIV4_ZX, DIV4_HP, + DIV4_ZX, DIV4_HP, DIV4_ISPB, DIV4_S, DIV4_ZB, DIV4_ZB3, DIV4_CP, DIV4_DDRP, DIV4_NR }; @@ -355,8 +326,6 @@ static struct clk div4_clks[DIV4_NR] = { [DIV4_B] = DIV4(FRQCRA, 8, 0x6fff, CLK_ENABLE_ON_INIT), [DIV4_M1] = DIV4(FRQCRA, 4, 0x6fff, CLK_ENABLE_ON_INIT), [DIV4_CSIR] = DIV4(FRQCRA, 0, 0x6fff, 0), - [DIV4_ZTR] = DIV4(FRQCRB, 20, 0x6fff, 0), - [DIV4_ZT] = DIV4(FRQCRB, 16, 0x6fff, 0), [DIV4_ZX] = DIV4(FRQCRB, 12, 0x6fff, 0), [DIV4_HP] = DIV4(FRQCRB, 4, 0x6fff, 0), [DIV4_ISPB] = DIV4(FRQCRC, 20, 0x6fff, 0), @@ -516,8 +485,6 @@ static struct clk_lookup lookups[] = { CLKDEV_CON_ID("b_clk", &div4_clks[DIV4_B]), CLKDEV_CON_ID("m1_clk", &div4_clks[DIV4_M1]), CLKDEV_CON_ID("csir_clk", &div4_clks[DIV4_CSIR]), - CLKDEV_CON_ID("ztr_clk", &div4_clks[DIV4_ZTR]), - CLKDEV_CON_ID("zt_clk", &div4_clks[DIV4_ZT]), CLKDEV_CON_ID("zx_clk", &div4_clks[DIV4_ZX]), CLKDEV_CON_ID("hp_clk", &div4_clks[DIV4_HP]), CLKDEV_CON_ID("ispb_clk", &div4_clks[DIV4_ISPB]), @@ -654,5 +621,4 @@ void __init sh7372_clock_init(void) shmobile_clk_init(); else panic("failed to setup sh7372 clocks\n"); - } diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c index afa5423a0f93..784fbaa4cc55 100644 --- a/arch/arm/mach-shmobile/clock-sh73a0.c +++ b/arch/arm/mach-shmobile/clock-sh73a0.c @@ -21,6 +21,8 @@ #include <linux/io.h> #include <linux/sh_clk.h> #include <linux/clkdev.h> +#include <asm/processor.h> +#include <mach/clock.h> #include <mach/common.h> #define FRQCRA IOMEM(0xe6150000) @@ -82,61 +84,16 @@ struct clk sh73a0_extal2_clk = { .rate = 48000000, }; -/* A fixed divide-by-2 block */ -static unsigned long div2_recalc(struct clk *clk) -{ - return clk->parent->rate / 2; -} - -static struct sh_clk_ops div2_clk_ops = { - .recalc = div2_recalc, -}; - -static unsigned long div7_recalc(struct clk *clk) -{ - return clk->parent->rate / 7; -} - -static struct sh_clk_ops div7_clk_ops = { - .recalc = div7_recalc, -}; - -static unsigned long div13_recalc(struct clk *clk) -{ - return clk->parent->rate / 13; -} - -static struct sh_clk_ops div13_clk_ops = { - .recalc = div13_recalc, -}; - -/* Divide extal1 by two */ -static struct clk extal1_div2_clk = { - .ops = &div2_clk_ops, - .parent = &sh73a0_extal1_clk, -}; - -/* Divide extal2 by two */ -static struct clk extal2_div2_clk = { - .ops = &div2_clk_ops, - .parent = &sh73a0_extal2_clk, -}; - static struct sh_clk_ops main_clk_ops = { .recalc = followparent_recalc, }; /* Main clock */ static struct clk main_clk = { + /* .parent wll be set on sh73a0_clock_init() */ .ops = &main_clk_ops, }; -/* Divide Main clock by two */ -static struct clk main_div2_clk = { - .ops = &div2_clk_ops, - .parent = &main_clk, -}; - /* PLL0, PLL1, PLL2, PLL3 */ static unsigned long pll_recalc(struct clk *clk) { @@ -192,21 +149,17 @@ static struct clk pll3_clk = { .enable_bit = 3, }; -/* Divide PLL */ -static struct clk pll1_div2_clk = { - .ops = &div2_clk_ops, - .parent = &pll1_clk, -}; - -static struct clk pll1_div7_clk = { - .ops = &div7_clk_ops, - .parent = &pll1_clk, -}; +/* A fixed divide block */ +SH_CLK_RATIO(div2, 1, 2); +SH_CLK_RATIO(div7, 1, 7); +SH_CLK_RATIO(div13, 1, 13); -static struct clk pll1_div13_clk = { - .ops = &div13_clk_ops, - .parent = &pll1_clk, -}; +SH_FIXED_RATIO_CLK(extal1_div2_clk, sh73a0_extal1_clk, div2); +SH_FIXED_RATIO_CLK(extal2_div2_clk, sh73a0_extal2_clk, div2); +SH_FIXED_RATIO_CLK(main_div2_clk, main_clk, div2); +SH_FIXED_RATIO_CLK(pll1_div2_clk, pll1_clk, div2); +SH_FIXED_RATIO_CLK(pll1_div7_clk, pll1_clk, div7); +SH_FIXED_RATIO_CLK(pll1_div13_clk, pll1_clk, div13); /* External input clock */ struct clk sh73a0_extcki_clk = { @@ -234,14 +187,24 @@ static struct clk *main_clks[] = { &sh73a0_extalr_clk, }; -static void div4_kick(struct clk *clk) +static int frqcr_kick(void) { - unsigned long value; + int i; + + /* set KICK bit in FRQCRB to update hardware setting, check success */ + __raw_writel(__raw_readl(FRQCRB) | (1 << 31), FRQCRB); + for (i = 1000; i; i--) + if (__raw_readl(FRQCRB) & (1 << 31)) + cpu_relax(); + else + return i; - /* set KICK bit in FRQCRB to update hardware setting */ - value = __raw_readl(FRQCRB); - value |= (1 << 31); - __raw_writel(value, FRQCRB); + return -ETIMEDOUT; +} + +static void div4_kick(struct clk *clk) +{ + frqcr_kick(); } static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 18, @@ -258,25 +221,37 @@ static struct clk_div4_table div4_table = { }; enum { DIV4_I, DIV4_ZG, DIV4_M3, DIV4_B, DIV4_M1, DIV4_M2, - DIV4_Z, DIV4_ZTR, DIV4_ZT, DIV4_ZX, DIV4_HP, DIV4_NR }; + DIV4_Z, DIV4_ZX, DIV4_HP, DIV4_NR }; #define DIV4(_reg, _bit, _mask, _flags) \ SH_CLK_DIV4(&pll1_clk, _reg, _bit, _mask, _flags) static struct clk div4_clks[DIV4_NR] = { [DIV4_I] = DIV4(FRQCRA, 20, 0xdff, CLK_ENABLE_ON_INIT), - [DIV4_ZG] = DIV4(FRQCRA, 16, 0xd7f, CLK_ENABLE_ON_INIT), + [DIV4_ZG] = SH_CLK_DIV4(&pll0_clk, FRQCRA, 16, 0xd7f, CLK_ENABLE_ON_INIT), [DIV4_M3] = DIV4(FRQCRA, 12, 0x1dff, CLK_ENABLE_ON_INIT), [DIV4_B] = DIV4(FRQCRA, 8, 0xdff, CLK_ENABLE_ON_INIT), [DIV4_M1] = DIV4(FRQCRA, 4, 0x1dff, 0), [DIV4_M2] = DIV4(FRQCRA, 0, 0x1dff, 0), - [DIV4_Z] = DIV4(FRQCRB, 24, 0x97f, 0), - [DIV4_ZTR] = DIV4(FRQCRB, 20, 0xdff, 0), - [DIV4_ZT] = DIV4(FRQCRB, 16, 0xdff, 0), + [DIV4_Z] = SH_CLK_DIV4(&pll0_clk, FRQCRB, 24, 0x97f, 0), [DIV4_ZX] = DIV4(FRQCRB, 12, 0xdff, 0), [DIV4_HP] = DIV4(FRQCRB, 4, 0xdff, 0), }; +static unsigned long twd_recalc(struct clk *clk) +{ + return clk_get_rate(clk->parent) / 4; +} + +static struct sh_clk_ops twd_clk_ops = { + .recalc = twd_recalc, +}; + +static struct clk twd_clk = { + .parent = &div4_clks[DIV4_Z], + .ops = &twd_clk_ops, +}; + enum { DIV6_VCK1, DIV6_VCK2, DIV6_VCK3, DIV6_ZB1, DIV6_FLCTL, DIV6_SDHI0, DIV6_SDHI1, DIV6_SDHI2, DIV6_FSIA, DIV6_FSIB, DIV6_SUB, @@ -471,6 +446,7 @@ static struct clk dsi1phy_clk = { static struct clk *late_main_clks[] = { &dsi0phy_clk, &dsi1phy_clk, + &twd_clk, }; enum { MSTP001, @@ -535,6 +511,7 @@ static struct clk mstp_clks[MSTP_NR] = { static struct clk_lookup lookups[] = { /* main clocks */ CLKDEV_CON_ID("r_clk", &r_clk), + CLKDEV_DEV_ID("smp_twd", &twd_clk), /* smp_twd */ /* DIV6 clocks */ CLKDEV_CON_ID("vck1_clk", &div6_clks[DIV6_VCK1]), @@ -581,10 +558,13 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("e6822000.i2c", &mstp_clks[MSTP323]), /* I2C1 */ CLKDEV_DEV_ID("renesas_usbhs", &mstp_clks[MSTP322]), /* USB */ CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */ + CLKDEV_DEV_ID("ee100000.sdhi", &mstp_clks[MSTP314]), /* SDHI0 */ CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */ + CLKDEV_DEV_ID("ee120000.sdhi", &mstp_clks[MSTP313]), /* SDHI1 */ CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMCIF0 */ CLKDEV_DEV_ID("e6bd0000.mmcif", &mstp_clks[MSTP312]), /* MMCIF0 */ CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP311]), /* SDHI2 */ + CLKDEV_DEV_ID("ee140000.sdhi", &mstp_clks[MSTP311]), /* SDHI2 */ CLKDEV_DEV_ID("leds-renesas-tpu.12", &mstp_clks[MSTP303]), /* TPU1 */ CLKDEV_DEV_ID("leds-renesas-tpu.21", &mstp_clks[MSTP302]), /* TPU2 */ CLKDEV_DEV_ID("leds-renesas-tpu.30", &mstp_clks[MSTP301]), /* TPU3 */ diff --git a/arch/arm/mach-shmobile/clock.c b/arch/arm/mach-shmobile/clock.c index e816ca9bd213..ad7df629d995 100644 --- a/arch/arm/mach-shmobile/clock.c +++ b/arch/arm/mach-shmobile/clock.c @@ -23,6 +23,19 @@ #include <linux/init.h> #include <linux/sh_clk.h> #include <linux/export.h> +#include <mach/clock.h> +#include <mach/common.h> + +unsigned long shmobile_fixed_ratio_clk_recalc(struct clk *clk) +{ + struct clk_ratio *p = clk->priv; + + return clk->parent->rate / p->div * p->mul; +}; + +struct sh_clk_ops shmobile_fixed_ratio_clk_ops = { + .recalc = shmobile_fixed_ratio_clk_recalc, +}; int __init shmobile_clk_init(void) { diff --git a/arch/arm/mach-shmobile/cpuidle.c b/arch/arm/mach-shmobile/cpuidle.c index 9e050268cde4..0afeb5c7061c 100644 --- a/arch/arm/mach-shmobile/cpuidle.c +++ b/arch/arm/mach-shmobile/cpuidle.c @@ -16,39 +16,22 @@ #include <asm/cpuidle.h> #include <asm/io.h> -int shmobile_enter_wfi(struct cpuidle_device *dev, struct cpuidle_driver *drv, - int index) -{ - cpu_do_idle(); - return 0; -} - -static struct cpuidle_device shmobile_cpuidle_dev; static struct cpuidle_driver shmobile_cpuidle_default_driver = { .name = "shmobile_cpuidle", .owner = THIS_MODULE, - .en_core_tk_irqen = 1, .states[0] = ARM_CPUIDLE_WFI_STATE, - .states[0].enter = shmobile_enter_wfi, .safe_state_index = 0, /* C1 */ .state_count = 1, }; static struct cpuidle_driver *cpuidle_drv = &shmobile_cpuidle_default_driver; -void shmobile_cpuidle_set_driver(struct cpuidle_driver *drv) +void __init shmobile_cpuidle_set_driver(struct cpuidle_driver *drv) { cpuidle_drv = drv; } -int shmobile_cpuidle_init(void) +int __init shmobile_cpuidle_init(void) { - struct cpuidle_device *dev = &shmobile_cpuidle_dev; - - cpuidle_register_driver(cpuidle_drv); - - dev->state_count = cpuidle_drv->state_count; - cpuidle_register_device(dev); - - return 0; + return cpuidle_register(cpuidle_drv, NULL); } diff --git a/arch/arm/mach-shmobile/headsmp-sh73a0.S b/arch/arm/mach-shmobile/headsmp-scu.S index bec4c0d9b713..7d113f898e7f 100644 --- a/arch/arm/mach-shmobile/headsmp-sh73a0.S +++ b/arch/arm/mach-shmobile/headsmp-scu.S @@ -1,5 +1,5 @@ /* - * SMP support for SoC sh73a0 + * Shared SCU setup for mach-shmobile * * Copyright (C) 2012 Bastian Hecht * @@ -35,11 +35,12 @@ * the physical address as the MMU is still turned off. */ .align 12 -ENTRY(sh73a0_secondary_vector) +ENTRY(shmobile_secondary_vector_scu) mrc p15, 0, r0, c0, c0, 5 @ read MIPDR and r0, r0, #3 @ mask out cpu ID lsl r0, r0, #3 @ we will shift by cpu_id * 8 bits - mov r1, #0xf0000000 @ SCU base address + ldr r1, 2f + ldr r1, [r1] @ SCU base address ldr r2, [r1, #8] @ SCU Power Status Register mov r3, #3 bic r2, r2, r3, lsl r0 @ Clear bits of our CPU (Run Mode) @@ -47,4 +48,10 @@ ENTRY(sh73a0_secondary_vector) ldr pc, 1f 1: .long shmobile_invalidate_start - PAGE_OFFSET + PLAT_PHYS_OFFSET -ENDPROC(sh73a0_secondary_vector) +2: .long shmobile_scu_base - PAGE_OFFSET + PLAT_PHYS_OFFSET +ENDPROC(shmobile_secondary_vector_scu) + + .text + .globl shmobile_scu_base +shmobile_scu_base: + .space 4 diff --git a/arch/arm/mach-shmobile/hotplug.c b/arch/arm/mach-shmobile/hotplug.c deleted file mode 100644 index a1524e3367b0..000000000000 --- a/arch/arm/mach-shmobile/hotplug.c +++ /dev/null @@ -1,68 +0,0 @@ -/* - * SMP support for R-Mobile / SH-Mobile - * - * Copyright (C) 2010 Magnus Damm - * - * Based on realview, Copyright (C) 2002 ARM Ltd, All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/smp.h> -#include <linux/cpumask.h> -#include <linux/delay.h> -#include <linux/of.h> -#include <mach/common.h> -#include <mach/r8a7779.h> -#include <mach/emev2.h> -#include <asm/cacheflush.h> -#include <asm/mach-types.h> - -static cpumask_t dead_cpus; - -void shmobile_cpu_die(unsigned int cpu) -{ - /* hardware shutdown code running on the CPU that is being offlined */ - flush_cache_all(); - dsb(); - - /* notify platform_cpu_kill() that hardware shutdown is finished */ - cpumask_set_cpu(cpu, &dead_cpus); - - /* wait for SoC code in platform_cpu_kill() to shut off CPU core - * power. CPU bring up starts from the reset vector. - */ - while (1) { - /* - * here's the WFI - */ - asm(".word 0xe320f003\n" - : - : - : "memory", "cc"); - } -} - -int shmobile_cpu_disable(unsigned int cpu) -{ - cpumask_clear_cpu(cpu, &dead_cpus); - /* - * we don't allow CPU 0 to be shutdown (it is still too special - * e.g. clock tick interrupts) - */ - return cpu == 0 ? -EPERM : 0; -} - -int shmobile_cpu_disable_any(unsigned int cpu) -{ - cpumask_clear_cpu(cpu, &dead_cpus); - return 0; -} - -int shmobile_cpu_is_dead(unsigned int cpu) -{ - return cpumask_test_cpu(cpu, &dead_cpus); -} diff --git a/arch/arm/mach-shmobile/include/mach/clock.h b/arch/arm/mach-shmobile/include/mach/clock.h new file mode 100644 index 000000000000..76ac61292e48 --- /dev/null +++ b/arch/arm/mach-shmobile/include/mach/clock.h @@ -0,0 +1,39 @@ +#ifndef CLOCK_H +#define CLOCK_H + +unsigned long shmobile_fixed_ratio_clk_recalc(struct clk *clk); +extern struct sh_clk_ops shmobile_fixed_ratio_clk_ops; + +/* clock ratio */ +struct clk_ratio { + int mul; + int div; +}; + +#define SH_CLK_RATIO(name, m, d) \ +static struct clk_ratio name ##_ratio = { \ + .mul = m, \ + .div = d, \ +} + +#define SH_FIXED_RATIO_CLKg(name, p, r) \ +struct clk name = { \ + .parent = &p, \ + .ops = &shmobile_fixed_ratio_clk_ops,\ + .priv = &r ## _ratio, \ +} + +#define SH_FIXED_RATIO_CLK(name, p, r) \ +static SH_FIXED_RATIO_CLKg(name, p, r); + +#define SH_FIXED_RATIO_CLK_SET(name, p, m, d) \ + SH_CLK_RATIO(name, m, d); \ + SH_FIXED_RATIO_CLK(name, p, name); + +#define SH_CLK_SET_RATIO(p, m, d) \ +{ \ + (p)->mul = m; \ + (p)->div = d; \ +} + +#endif diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h index e48606d8a2be..4634a5d4b63f 100644 --- a/arch/arm/mach-shmobile/include/mach/common.h +++ b/arch/arm/mach-shmobile/include/mach/common.h @@ -8,68 +8,14 @@ extern void shmobile_setup_delay(unsigned int max_cpu_core_mhz, struct twd_local_timer; extern void shmobile_setup_console(void); extern void shmobile_secondary_vector(void); +extern void shmobile_secondary_vector_scu(void); struct clk; extern int shmobile_clk_init(void); extern void shmobile_handle_irq_intc(struct pt_regs *); extern struct platform_suspend_ops shmobile_suspend_ops; struct cpuidle_driver; -struct cpuidle_device; -extern int shmobile_enter_wfi(struct cpuidle_device *dev, - struct cpuidle_driver *drv, int index); extern void shmobile_cpuidle_set_driver(struct cpuidle_driver *drv); -extern void sh7372_init_irq(void); -extern void sh7372_map_io(void); -extern void sh7372_earlytimer_init(void); -extern void sh7372_add_early_devices(void); -extern void sh7372_add_standard_devices(void); -extern void sh7372_add_early_devices_dt(void); -extern void sh7372_add_standard_devices_dt(void); -extern void sh7372_clock_init(void); -extern void sh7372_pinmux_init(void); -extern void sh7372_pm_init(void); -extern void sh7372_resume_core_standby_sysc(void); -extern int sh7372_do_idle_sysc(unsigned long sleep_mode); -extern struct clk sh7372_extal1_clk; -extern struct clk sh7372_extal2_clk; - -extern void sh73a0_init_irq(void); -extern void sh73a0_init_irq_dt(void); -extern void sh73a0_map_io(void); -extern void sh73a0_earlytimer_init(void); -extern void sh73a0_add_early_devices(void); -extern void sh73a0_add_early_devices_dt(void); -extern void sh73a0_add_standard_devices(void); -extern void sh73a0_add_standard_devices_dt(void); -extern void sh73a0_clock_init(void); -extern void sh73a0_pinmux_init(void); -extern void sh73a0_pm_init(void); -extern void sh73a0_secondary_vector(void); -extern struct clk sh73a0_extal1_clk; -extern struct clk sh73a0_extal2_clk; -extern struct clk sh73a0_extcki_clk; -extern struct clk sh73a0_extalr_clk; - -extern void r8a7740_init_irq(void); -extern void r8a7740_map_io(void); -extern void r8a7740_add_early_devices(void); -extern void r8a7740_add_standard_devices(void); -extern void r8a7740_clock_init(u8 md_ck); -extern void r8a7740_pinmux_init(void); -extern void r8a7740_pm_init(void); - -extern void r8a7779_init_irq(void); -extern void r8a7779_map_io(void); -extern void r8a7779_earlytimer_init(void); -extern void r8a7779_add_early_devices(void); -extern void r8a7779_add_standard_devices(void); -extern void r8a7779_clock_init(void); -extern void r8a7779_pinmux_init(void); -extern void r8a7779_pm_init(void); -extern void r8a7740_meram_workaround(void); - -extern void r8a7779_register_twd(void); - #ifdef CONFIG_SUSPEND int shmobile_suspend_init(void); #else @@ -82,16 +28,7 @@ int shmobile_cpuidle_init(void); static inline int shmobile_cpuidle_init(void) { return 0; } #endif -extern void shmobile_cpu_die(unsigned int cpu); -extern int shmobile_cpu_disable(unsigned int cpu); -extern int shmobile_cpu_disable_any(unsigned int cpu); - -#ifdef CONFIG_HOTPLUG_CPU -extern int shmobile_cpu_is_dead(unsigned int cpu); -#else -static inline int shmobile_cpu_is_dead(unsigned int cpu) { return 1; } -#endif - +extern void __iomem *shmobile_scu_base; extern void shmobile_smp_init_cpus(unsigned int ncores); static inline void __init shmobile_init_late(void) diff --git a/arch/arm/mach-shmobile/include/mach/irqs.h b/arch/arm/mach-shmobile/include/mach/irqs.h index 06a5da3c3050..b2074e2acb15 100644 --- a/arch/arm/mach-shmobile/include/mach/irqs.h +++ b/arch/arm/mach-shmobile/include/mach/irqs.h @@ -5,10 +5,15 @@ /* GIC */ #define gic_spi(nr) ((nr) + 32) +#define gic_iid(nr) (nr) /* ICCIAR / interrupt ID */ /* INTCS */ #define INTCS_VECT_BASE 0x3400 #define INTCS_VECT(n, vect) INTC_VECT((n), INTCS_VECT_BASE + (vect)) #define intcs_evt2irq(evt) evt2irq(INTCS_VECT_BASE + (evt)) +/* External IRQ pins */ +#define IRQPIN_BASE 2000 +#define irq_pin(nr) ((nr) + IRQPIN_BASE) + #endif /* __ASM_MACH_IRQS_H */ diff --git a/arch/arm/mach-shmobile/include/mach/r8a73a4.h b/arch/arm/mach-shmobile/include/mach/r8a73a4.h new file mode 100644 index 000000000000..f043103e32c9 --- /dev/null +++ b/arch/arm/mach-shmobile/include/mach/r8a73a4.h @@ -0,0 +1,8 @@ +#ifndef __ASM_R8A73A4_H__ +#define __ASM_R8A73A4_H__ + +void r8a73a4_add_standard_devices(void); +void r8a73a4_clock_init(void); +void r8a73a4_pinmux_init(void); + +#endif /* __ASM_R8A73A4_H__ */ diff --git a/arch/arm/mach-shmobile/include/mach/r8a7740.h b/arch/arm/mach-shmobile/include/mach/r8a7740.h index 59d252f4cf97..abdc4d4efa28 100644 --- a/arch/arm/mach-shmobile/include/mach/r8a7740.h +++ b/arch/arm/mach-shmobile/include/mach/r8a7740.h @@ -241,48 +241,9 @@ enum { /* LCD0 */ GPIO_FN_LCDC0_SELECT, - GPIO_FN_LCD0_D0, GPIO_FN_LCD0_D1, GPIO_FN_LCD0_D2, - GPIO_FN_LCD0_D3, GPIO_FN_LCD0_D4, GPIO_FN_LCD0_D5, - GPIO_FN_LCD0_D6, GPIO_FN_LCD0_D7, GPIO_FN_LCD0_D8, - GPIO_FN_LCD0_D9, GPIO_FN_LCD0_D10, GPIO_FN_LCD0_D11, - GPIO_FN_LCD0_D12, GPIO_FN_LCD0_D13, GPIO_FN_LCD0_D14, - GPIO_FN_LCD0_D15, GPIO_FN_LCD0_D16, GPIO_FN_LCD0_D17, - GPIO_FN_LCD0_DON, GPIO_FN_LCD0_VCPWC, GPIO_FN_LCD0_VEPWC, - - GPIO_FN_LCD0_DCK, GPIO_FN_LCD0_VSYN, /* for RGB */ - GPIO_FN_LCD0_HSYN, GPIO_FN_LCD0_DISP, /* for RGB */ - - GPIO_FN_LCD0_WR, GPIO_FN_LCD0_RD, /* for SYS */ - GPIO_FN_LCD0_CS, GPIO_FN_LCD0_RS, /* for SYS */ - - GPIO_FN_LCD0_D18_PORT163, GPIO_FN_LCD0_D19_PORT162, - GPIO_FN_LCD0_D20_PORT161, GPIO_FN_LCD0_D21_PORT158, - GPIO_FN_LCD0_D22_PORT160, GPIO_FN_LCD0_D23_PORT159, - GPIO_FN_LCD0_LCLK_PORT165, /* MSEL5CR_6_1 */ - - GPIO_FN_LCD0_D18_PORT40, GPIO_FN_LCD0_D19_PORT4, - GPIO_FN_LCD0_D20_PORT3, GPIO_FN_LCD0_D21_PORT2, - GPIO_FN_LCD0_D22_PORT0, GPIO_FN_LCD0_D23_PORT1, - GPIO_FN_LCD0_LCLK_PORT102, /* MSEL5CR_6_0 */ /* LCD1 */ GPIO_FN_LCDC1_SELECT, - GPIO_FN_LCD1_D0, GPIO_FN_LCD1_D1, GPIO_FN_LCD1_D2, - GPIO_FN_LCD1_D3, GPIO_FN_LCD1_D4, GPIO_FN_LCD1_D5, - GPIO_FN_LCD1_D6, GPIO_FN_LCD1_D7, GPIO_FN_LCD1_D8, - GPIO_FN_LCD1_D9, GPIO_FN_LCD1_D10, GPIO_FN_LCD1_D11, - GPIO_FN_LCD1_D12, GPIO_FN_LCD1_D13, GPIO_FN_LCD1_D14, - GPIO_FN_LCD1_D15, GPIO_FN_LCD1_D16, GPIO_FN_LCD1_D17, - GPIO_FN_LCD1_D18, GPIO_FN_LCD1_D19, GPIO_FN_LCD1_D20, - GPIO_FN_LCD1_D21, GPIO_FN_LCD1_D22, GPIO_FN_LCD1_D23, - GPIO_FN_LCD1_DON, GPIO_FN_LCD1_VCPWC, - GPIO_FN_LCD1_LCLK, GPIO_FN_LCD1_VEPWC, - - GPIO_FN_LCD1_DCK, GPIO_FN_LCD1_VSYN, /* for RGB */ - GPIO_FN_LCD1_HSYN, GPIO_FN_LCD1_DISP, /* for RGB */ - - GPIO_FN_LCD1_WR, GPIO_FN_LCD1_RD, /* for SYS */ - GPIO_FN_LCD1_CS, GPIO_FN_LCD1_RS, /* for SYS */ /* RSPI */ GPIO_FN_RSPI_SSL0_A, GPIO_FN_RSPI_SSL1_A, @@ -346,26 +307,6 @@ enum { GPIO_FN_SIM_D_PORT22, /* SIM_D Port 22/199 */ GPIO_FN_SIM_D_PORT199, - /* SDHI0 */ - GPIO_FN_SDHI0_D0, GPIO_FN_SDHI0_D1, GPIO_FN_SDHI0_D2, - GPIO_FN_SDHI0_D3, GPIO_FN_SDHI0_CD, GPIO_FN_SDHI0_WP, - GPIO_FN_SDHI0_CMD, GPIO_FN_SDHI0_CLK, - - /* SDHI1 */ - GPIO_FN_SDHI1_D0, GPIO_FN_SDHI1_D1, GPIO_FN_SDHI1_D2, - GPIO_FN_SDHI1_D3, GPIO_FN_SDHI1_CD, GPIO_FN_SDHI1_WP, - GPIO_FN_SDHI1_CMD, GPIO_FN_SDHI1_CLK, - - /* SDHI2 */ - GPIO_FN_SDHI2_D0, GPIO_FN_SDHI2_D1, GPIO_FN_SDHI2_D2, - GPIO_FN_SDHI2_D3, GPIO_FN_SDHI2_CLK, GPIO_FN_SDHI2_CMD, - - GPIO_FN_SDHI2_CD_PORT24, /* MSEL5CR_19_0 */ - GPIO_FN_SDHI2_WP_PORT25, - - GPIO_FN_SDHI2_WP_PORT177, /* MSEL5CR_19_1 */ - GPIO_FN_SDHI2_CD_PORT202, - /* MSIOF2 */ GPIO_FN_MSIOF2_TXD, GPIO_FN_MSIOF2_RXD, GPIO_FN_MSIOF2_TSCK, GPIO_FN_MSIOF2_SS2, GPIO_FN_MSIOF2_TSYNC, GPIO_FN_MSIOF2_SS1, @@ -417,21 +358,6 @@ enum { GPIO_FN_MEMC_DREQ1, GPIO_FN_MEMC_A0, - /* MMC */ - GPIO_FN_MMC0_D0_PORT68, GPIO_FN_MMC0_D1_PORT69, - GPIO_FN_MMC0_D2_PORT70, GPIO_FN_MMC0_D3_PORT71, - GPIO_FN_MMC0_D4_PORT72, GPIO_FN_MMC0_D5_PORT73, - GPIO_FN_MMC0_D6_PORT74, GPIO_FN_MMC0_D7_PORT75, - GPIO_FN_MMC0_CLK_PORT66, - GPIO_FN_MMC0_CMD_PORT67, /* MSEL4CR_15_0 */ - - GPIO_FN_MMC1_D0_PORT149, GPIO_FN_MMC1_D1_PORT148, - GPIO_FN_MMC1_D2_PORT147, GPIO_FN_MMC1_D3_PORT146, - GPIO_FN_MMC1_D4_PORT145, GPIO_FN_MMC1_D5_PORT144, - GPIO_FN_MMC1_D6_PORT143, GPIO_FN_MMC1_D7_PORT142, - GPIO_FN_MMC1_CLK_PORT103, - GPIO_FN_MMC1_CMD_PORT104, /* MSEL4CR_15_1 */ - /* MSIOF0 */ GPIO_FN_MSIOF0_SS1, GPIO_FN_MSIOF0_SS2, GPIO_FN_MSIOF0_RXD, GPIO_FN_MSIOF0_TXD, @@ -606,6 +532,15 @@ enum { SHDMA_SLAVE_USBHS_RX, }; +extern void r8a7740_meram_workaround(void); +extern void r8a7740_init_irq(void); +extern void r8a7740_map_io(void); +extern void r8a7740_add_early_devices(void); +extern void r8a7740_add_standard_devices(void); +extern void r8a7740_clock_init(u8 md_ck); +extern void r8a7740_pinmux_init(void); +extern void r8a7740_pm_init(void); + #ifdef CONFIG_PM extern void __init r8a7740_init_pm_domains(void); #else diff --git a/arch/arm/mach-shmobile/include/mach/r8a7778.h b/arch/arm/mach-shmobile/include/mach/r8a7778.h new file mode 100644 index 000000000000..951149e6bcca --- /dev/null +++ b/arch/arm/mach-shmobile/include/mach/r8a7778.h @@ -0,0 +1,32 @@ +/* + * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#ifndef __ASM_R8A7778_H__ +#define __ASM_R8A7778_H__ + +#include <linux/sh_eth.h> + +extern void r8a7778_add_standard_devices(void); +extern void r8a7778_add_standard_devices_dt(void); +extern void r8a7778_add_ether_device(struct sh_eth_plat_data *pdata); +extern void r8a7778_init_delay(void); +extern void r8a7778_init_irq(void); +extern void r8a7778_init_irq_dt(void); +extern void r8a7778_clock_init(void); +extern void r8a7778_init_irq_extpin(int irlm); + +#endif /* __ASM_R8A7778_H__ */ diff --git a/arch/arm/mach-shmobile/include/mach/r8a7779.h b/arch/arm/mach-shmobile/include/mach/r8a7779.h index 8ab0cd6ad6b0..188b295938a5 100644 --- a/arch/arm/mach-shmobile/include/mach/r8a7779.h +++ b/arch/arm/mach-shmobile/include/mach/r8a7779.h @@ -3,327 +3,7 @@ #include <linux/sh_clk.h> #include <linux/pm_domain.h> - -/* Pin Function Controller: - * GPIO_FN_xx - GPIO used to select pin function - * GPIO_GP_x_x - GPIO mapped to real I/O pin on CPU - */ -enum { - GPIO_GP_0_0, GPIO_GP_0_1, GPIO_GP_0_2, GPIO_GP_0_3, - GPIO_GP_0_4, GPIO_GP_0_5, GPIO_GP_0_6, GPIO_GP_0_7, - GPIO_GP_0_8, GPIO_GP_0_9, GPIO_GP_0_10, GPIO_GP_0_11, - GPIO_GP_0_12, GPIO_GP_0_13, GPIO_GP_0_14, GPIO_GP_0_15, - GPIO_GP_0_16, GPIO_GP_0_17, GPIO_GP_0_18, GPIO_GP_0_19, - GPIO_GP_0_20, GPIO_GP_0_21, GPIO_GP_0_22, GPIO_GP_0_23, - GPIO_GP_0_24, GPIO_GP_0_25, GPIO_GP_0_26, GPIO_GP_0_27, - GPIO_GP_0_28, GPIO_GP_0_29, GPIO_GP_0_30, GPIO_GP_0_31, - - GPIO_GP_1_0, GPIO_GP_1_1, GPIO_GP_1_2, GPIO_GP_1_3, - GPIO_GP_1_4, GPIO_GP_1_5, GPIO_GP_1_6, GPIO_GP_1_7, - GPIO_GP_1_8, GPIO_GP_1_9, GPIO_GP_1_10, GPIO_GP_1_11, - GPIO_GP_1_12, GPIO_GP_1_13, GPIO_GP_1_14, GPIO_GP_1_15, - GPIO_GP_1_16, GPIO_GP_1_17, GPIO_GP_1_18, GPIO_GP_1_19, - GPIO_GP_1_20, GPIO_GP_1_21, GPIO_GP_1_22, GPIO_GP_1_23, - GPIO_GP_1_24, GPIO_GP_1_25, GPIO_GP_1_26, GPIO_GP_1_27, - GPIO_GP_1_28, GPIO_GP_1_29, GPIO_GP_1_30, GPIO_GP_1_31, - - GPIO_GP_2_0, GPIO_GP_2_1, GPIO_GP_2_2, GPIO_GP_2_3, - GPIO_GP_2_4, GPIO_GP_2_5, GPIO_GP_2_6, GPIO_GP_2_7, - GPIO_GP_2_8, GPIO_GP_2_9, GPIO_GP_2_10, GPIO_GP_2_11, - GPIO_GP_2_12, GPIO_GP_2_13, GPIO_GP_2_14, GPIO_GP_2_15, - GPIO_GP_2_16, GPIO_GP_2_17, GPIO_GP_2_18, GPIO_GP_2_19, - GPIO_GP_2_20, GPIO_GP_2_21, GPIO_GP_2_22, GPIO_GP_2_23, - GPIO_GP_2_24, GPIO_GP_2_25, GPIO_GP_2_26, GPIO_GP_2_27, - GPIO_GP_2_28, GPIO_GP_2_29, GPIO_GP_2_30, GPIO_GP_2_31, - - GPIO_GP_3_0, GPIO_GP_3_1, GPIO_GP_3_2, GPIO_GP_3_3, - GPIO_GP_3_4, GPIO_GP_3_5, GPIO_GP_3_6, GPIO_GP_3_7, - GPIO_GP_3_8, GPIO_GP_3_9, GPIO_GP_3_10, GPIO_GP_3_11, - GPIO_GP_3_12, GPIO_GP_3_13, GPIO_GP_3_14, GPIO_GP_3_15, - GPIO_GP_3_16, GPIO_GP_3_17, GPIO_GP_3_18, GPIO_GP_3_19, - GPIO_GP_3_20, GPIO_GP_3_21, GPIO_GP_3_22, GPIO_GP_3_23, - GPIO_GP_3_24, GPIO_GP_3_25, GPIO_GP_3_26, GPIO_GP_3_27, - GPIO_GP_3_28, GPIO_GP_3_29, GPIO_GP_3_30, GPIO_GP_3_31, - - GPIO_GP_4_0, GPIO_GP_4_1, GPIO_GP_4_2, GPIO_GP_4_3, - GPIO_GP_4_4, GPIO_GP_4_5, GPIO_GP_4_6, GPIO_GP_4_7, - GPIO_GP_4_8, GPIO_GP_4_9, GPIO_GP_4_10, GPIO_GP_4_11, - GPIO_GP_4_12, GPIO_GP_4_13, GPIO_GP_4_14, GPIO_GP_4_15, - GPIO_GP_4_16, GPIO_GP_4_17, GPIO_GP_4_18, GPIO_GP_4_19, - GPIO_GP_4_20, GPIO_GP_4_21, GPIO_GP_4_22, GPIO_GP_4_23, - GPIO_GP_4_24, GPIO_GP_4_25, GPIO_GP_4_26, GPIO_GP_4_27, - GPIO_GP_4_28, GPIO_GP_4_29, GPIO_GP_4_30, GPIO_GP_4_31, - - GPIO_GP_5_0, GPIO_GP_5_1, GPIO_GP_5_2, GPIO_GP_5_3, - GPIO_GP_5_4, GPIO_GP_5_5, GPIO_GP_5_6, GPIO_GP_5_7, - GPIO_GP_5_8, GPIO_GP_5_9, GPIO_GP_5_10, GPIO_GP_5_11, - GPIO_GP_5_12, GPIO_GP_5_13, GPIO_GP_5_14, GPIO_GP_5_15, - GPIO_GP_5_16, GPIO_GP_5_17, GPIO_GP_5_18, GPIO_GP_5_19, - GPIO_GP_5_20, GPIO_GP_5_21, GPIO_GP_5_22, GPIO_GP_5_23, - GPIO_GP_5_24, GPIO_GP_5_25, GPIO_GP_5_26, GPIO_GP_5_27, - GPIO_GP_5_28, GPIO_GP_5_29, GPIO_GP_5_30, GPIO_GP_5_31, - - GPIO_GP_6_0, GPIO_GP_6_1, GPIO_GP_6_2, GPIO_GP_6_3, - GPIO_GP_6_4, GPIO_GP_6_5, GPIO_GP_6_6, GPIO_GP_6_7, - GPIO_GP_6_8, - - GPIO_FN_AVS1, GPIO_FN_AVS2, GPIO_FN_A17, GPIO_FN_A18, - GPIO_FN_A19, - - /* IPSR0 */ - GPIO_FN_USB_PENC2, GPIO_FN_SCK0, GPIO_FN_PWM1, GPIO_FN_PWMFSW0, - GPIO_FN_SCIF_CLK, GPIO_FN_TCLK0_C, GPIO_FN_BS, GPIO_FN_SD1_DAT2, - GPIO_FN_MMC0_D2, GPIO_FN_FD2, GPIO_FN_ATADIR0, GPIO_FN_SDSELF, - GPIO_FN_HCTS1, GPIO_FN_TX4_C, GPIO_FN_A0, GPIO_FN_SD1_DAT3, - GPIO_FN_MMC0_D3, GPIO_FN_FD3, GPIO_FN_A20, GPIO_FN_TX5_D, - GPIO_FN_HSPI_TX2_B, GPIO_FN_A21, GPIO_FN_SCK5_D, GPIO_FN_HSPI_CLK2_B, - GPIO_FN_A22, GPIO_FN_RX5_D, GPIO_FN_HSPI_RX2_B, GPIO_FN_VI1_R0, - GPIO_FN_A23, GPIO_FN_FCLE, GPIO_FN_HSPI_CLK2, GPIO_FN_VI1_R1, - GPIO_FN_A24, GPIO_FN_SD1_CD, GPIO_FN_MMC0_D4, GPIO_FN_FD4, - GPIO_FN_HSPI_CS2, GPIO_FN_VI1_R2, GPIO_FN_SSI_WS78_B, GPIO_FN_A25, - GPIO_FN_SD1_WP, GPIO_FN_MMC0_D5, GPIO_FN_FD5, GPIO_FN_HSPI_RX2, - GPIO_FN_VI1_R3, GPIO_FN_TX5_B, GPIO_FN_SSI_SDATA7_B, GPIO_FN_CTS0_B, - GPIO_FN_CLKOUT, GPIO_FN_TX3C_IRDA_TX_C, GPIO_FN_PWM0_B, GPIO_FN_CS0, - GPIO_FN_HSPI_CS2_B, GPIO_FN_CS1_A26, GPIO_FN_HSPI_TX2, - GPIO_FN_SDSELF_B, GPIO_FN_RD_WR, GPIO_FN_FWE, GPIO_FN_ATAG0, - GPIO_FN_VI1_R7, GPIO_FN_HRTS1, GPIO_FN_RX4_C, - - /* IPSR1 */ - GPIO_FN_EX_CS0, GPIO_FN_RX3_C_IRDA_RX_C, GPIO_FN_MMC0_D6, - GPIO_FN_FD6, GPIO_FN_EX_CS1, GPIO_FN_MMC0_D7, GPIO_FN_FD7, - GPIO_FN_EX_CS2, GPIO_FN_SD1_CLK, GPIO_FN_MMC0_CLK, GPIO_FN_FALE, - GPIO_FN_ATACS00, GPIO_FN_EX_CS3, GPIO_FN_SD1_CMD, GPIO_FN_MMC0_CMD, - GPIO_FN_FRE, GPIO_FN_ATACS10, GPIO_FN_VI1_R4, GPIO_FN_RX5_B, - GPIO_FN_HSCK1, GPIO_FN_SSI_SDATA8_B, GPIO_FN_RTS0_B_TANS_B, - GPIO_FN_SSI_SDATA9, GPIO_FN_EX_CS4, GPIO_FN_SD1_DAT0, GPIO_FN_MMC0_D0, - GPIO_FN_FD0, GPIO_FN_ATARD0, GPIO_FN_VI1_R5, GPIO_FN_SCK5_B, - GPIO_FN_HTX1, GPIO_FN_TX2_E, GPIO_FN_TX0_B, GPIO_FN_SSI_SCK9, - GPIO_FN_EX_CS5, GPIO_FN_SD1_DAT1, GPIO_FN_MMC0_D1, GPIO_FN_FD1, - GPIO_FN_ATAWR0, GPIO_FN_VI1_R6, GPIO_FN_HRX1, GPIO_FN_RX2_E, - GPIO_FN_RX0_B, GPIO_FN_SSI_WS9, GPIO_FN_MLB_CLK, GPIO_FN_PWM2, - GPIO_FN_SCK4, GPIO_FN_MLB_SIG, GPIO_FN_PWM3, GPIO_FN_TX4, - GPIO_FN_MLB_DAT, GPIO_FN_PWM4, GPIO_FN_RX4, GPIO_FN_HTX0, - GPIO_FN_TX1, GPIO_FN_SDATA, GPIO_FN_CTS0_C, GPIO_FN_SUB_TCK, - GPIO_FN_CC5_STATE2, GPIO_FN_CC5_STATE10, GPIO_FN_CC5_STATE18, - GPIO_FN_CC5_STATE26, GPIO_FN_CC5_STATE34, - - /* IPSR2 */ - GPIO_FN_HRX0, GPIO_FN_RX1, GPIO_FN_SCKZ, GPIO_FN_RTS0_C_TANS_C, - GPIO_FN_SUB_TDI, GPIO_FN_CC5_STATE3, GPIO_FN_CC5_STATE11, - GPIO_FN_CC5_STATE19, GPIO_FN_CC5_STATE27, GPIO_FN_CC5_STATE35, - GPIO_FN_HSCK0, GPIO_FN_SCK1, GPIO_FN_MTS, GPIO_FN_PWM5, - GPIO_FN_SCK0_C, GPIO_FN_SSI_SDATA9_B, GPIO_FN_SUB_TDO, - GPIO_FN_CC5_STATE0, GPIO_FN_CC5_STATE8, GPIO_FN_CC5_STATE16, - GPIO_FN_CC5_STATE24, GPIO_FN_CC5_STATE32, GPIO_FN_HCTS0, GPIO_FN_CTS1, - GPIO_FN_STM, GPIO_FN_PWM0_D, GPIO_FN_RX0_C, GPIO_FN_SCIF_CLK_C, - GPIO_FN_SUB_TRST, GPIO_FN_TCLK1_B, GPIO_FN_CC5_OSCOUT, GPIO_FN_HRTS0, - GPIO_FN_RTS1_TANS, GPIO_FN_MDATA, GPIO_FN_TX0_C, GPIO_FN_SUB_TMS, - GPIO_FN_CC5_STATE1, GPIO_FN_CC5_STATE9, GPIO_FN_CC5_STATE17, - GPIO_FN_CC5_STATE25, GPIO_FN_CC5_STATE33, GPIO_FN_DU0_DR0, - GPIO_FN_LCDOUT0, GPIO_FN_DREQ0, GPIO_FN_GPS_CLK_B, GPIO_FN_AUDATA0, - GPIO_FN_TX5_C, GPIO_FN_DU0_DR1, GPIO_FN_LCDOUT1, GPIO_FN_DACK0, - GPIO_FN_DRACK0, GPIO_FN_GPS_SIGN_B, GPIO_FN_AUDATA1, GPIO_FN_RX5_C, - GPIO_FN_DU0_DR2, GPIO_FN_LCDOUT2, GPIO_FN_DU0_DR3, GPIO_FN_LCDOUT3, - GPIO_FN_DU0_DR4, GPIO_FN_LCDOUT4, GPIO_FN_DU0_DR5, GPIO_FN_LCDOUT5, - GPIO_FN_DU0_DR6, GPIO_FN_LCDOUT6, GPIO_FN_DU0_DR7, GPIO_FN_LCDOUT7, - GPIO_FN_DU0_DG0, GPIO_FN_LCDOUT8, GPIO_FN_DREQ1, GPIO_FN_SCL2, - GPIO_FN_AUDATA2, - - /* IPSR3 */ - GPIO_FN_DU0_DG1, GPIO_FN_LCDOUT9, GPIO_FN_DACK1, GPIO_FN_SDA2, - GPIO_FN_AUDATA3, GPIO_FN_DU0_DG2, GPIO_FN_LCDOUT10, GPIO_FN_DU0_DG3, - GPIO_FN_LCDOUT11, GPIO_FN_DU0_DG4, GPIO_FN_LCDOUT12, GPIO_FN_DU0_DG5, - GPIO_FN_LCDOUT13, GPIO_FN_DU0_DG6, GPIO_FN_LCDOUT14, GPIO_FN_DU0_DG7, - GPIO_FN_LCDOUT15, GPIO_FN_DU0_DB0, GPIO_FN_LCDOUT16, GPIO_FN_EX_WAIT1, - GPIO_FN_SCL1, GPIO_FN_TCLK1, GPIO_FN_AUDATA4, GPIO_FN_DU0_DB1, - GPIO_FN_LCDOUT17, GPIO_FN_EX_WAIT2, GPIO_FN_SDA1, GPIO_FN_GPS_MAG_B, - GPIO_FN_AUDATA5, GPIO_FN_SCK5_C, GPIO_FN_DU0_DB2, GPIO_FN_LCDOUT18, - GPIO_FN_DU0_DB3, GPIO_FN_LCDOUT19, GPIO_FN_DU0_DB4, GPIO_FN_LCDOUT20, - GPIO_FN_DU0_DB5, GPIO_FN_LCDOUT21, GPIO_FN_DU0_DB6, GPIO_FN_LCDOUT22, - GPIO_FN_DU0_DB7, GPIO_FN_LCDOUT23, GPIO_FN_DU0_DOTCLKIN, - GPIO_FN_QSTVA_QVS, GPIO_FN_TX3_D_IRDA_TX_D, GPIO_FN_SCL3_B, - GPIO_FN_DU0_DOTCLKOUT0, GPIO_FN_QCLK, GPIO_FN_DU0_DOTCLKOUT1, - GPIO_FN_QSTVB_QVE, GPIO_FN_RX3_D_IRDA_RX_D, GPIO_FN_SDA3_B, - GPIO_FN_SDA2_C, GPIO_FN_DACK0_B, GPIO_FN_DRACK0_B, - GPIO_FN_DU0_EXHSYNC_DU0_HSYNC, GPIO_FN_QSTH_QHS, - GPIO_FN_DU0_EXVSYNC_DU0_VSYNC, GPIO_FN_QSTB_QHE, - GPIO_FN_DU0_EXODDF_DU0_ODDF_DISP_CDE, GPIO_FN_QCPV_QDE, - GPIO_FN_CAN1_TX, GPIO_FN_TX2_C, GPIO_FN_SCL2_C, GPIO_FN_REMOCON, - - /* IPSR4 */ - GPIO_FN_DU0_DISP, GPIO_FN_QPOLA, GPIO_FN_CAN_CLK_C, GPIO_FN_SCK2_C, - GPIO_FN_DU0_CDE, GPIO_FN_QPOLB, GPIO_FN_CAN1_RX, GPIO_FN_RX2_C, - GPIO_FN_DREQ0_B, GPIO_FN_SSI_SCK78_B, GPIO_FN_SCK0_B, GPIO_FN_DU1_DR0, - GPIO_FN_VI2_DATA0_VI2_B0, GPIO_FN_PWM6, GPIO_FN_SD3_CLK, - GPIO_FN_TX3_E_IRDA_TX_E, GPIO_FN_AUDCK, GPIO_FN_PWMFSW0_B, - GPIO_FN_DU1_DR1, GPIO_FN_VI2_DATA1_VI2_B1, GPIO_FN_PWM0, - GPIO_FN_SD3_CMD, GPIO_FN_RX3_E_IRDA_RX_E, GPIO_FN_AUDSYNC, - GPIO_FN_CTS0_D, GPIO_FN_DU1_DR2, GPIO_FN_VI2_G0, GPIO_FN_DU1_DR3, - GPIO_FN_VI2_G1, GPIO_FN_DU1_DR4, GPIO_FN_VI2_G2, GPIO_FN_DU1_DR5, - GPIO_FN_VI2_G3, GPIO_FN_DU1_DR6, GPIO_FN_VI2_G4, GPIO_FN_DU1_DR7, - GPIO_FN_VI2_G5, GPIO_FN_DU1_DG0, GPIO_FN_VI2_DATA2_VI2_B2, - GPIO_FN_SCL1_B, GPIO_FN_SD3_DAT2, GPIO_FN_SCK3_E, GPIO_FN_AUDATA6, - GPIO_FN_TX0_D, GPIO_FN_DU1_DG1, GPIO_FN_VI2_DATA3_VI2_B3, - GPIO_FN_SDA1_B, GPIO_FN_SD3_DAT3, GPIO_FN_SCK5, GPIO_FN_AUDATA7, - GPIO_FN_RX0_D, GPIO_FN_DU1_DG2, GPIO_FN_VI2_G6, GPIO_FN_DU1_DG3, - GPIO_FN_VI2_G7, GPIO_FN_DU1_DG4, GPIO_FN_VI2_R0, GPIO_FN_DU1_DG5, - GPIO_FN_VI2_R1, GPIO_FN_DU1_DG6, GPIO_FN_VI2_R2, GPIO_FN_DU1_DG7, - GPIO_FN_VI2_R3, GPIO_FN_DU1_DB0, GPIO_FN_VI2_DATA4_VI2_B4, - GPIO_FN_SCL2_B, GPIO_FN_SD3_DAT0, GPIO_FN_TX5, GPIO_FN_SCK0_D, - - /* IPSR5 */ - GPIO_FN_DU1_DB1, GPIO_FN_VI2_DATA5_VI2_B5, GPIO_FN_SDA2_B, - GPIO_FN_SD3_DAT1, GPIO_FN_RX5, GPIO_FN_RTS0_D_TANS_D, - GPIO_FN_DU1_DB2, GPIO_FN_VI2_R4, GPIO_FN_DU1_DB3, GPIO_FN_VI2_R5, - GPIO_FN_DU1_DB4, GPIO_FN_VI2_R6, GPIO_FN_DU1_DB5, GPIO_FN_VI2_R7, - GPIO_FN_DU1_DB6, GPIO_FN_SCL2_D, GPIO_FN_DU1_DB7, GPIO_FN_SDA2_D, - GPIO_FN_DU1_DOTCLKIN, GPIO_FN_VI2_CLKENB, GPIO_FN_HSPI_CS1, - GPIO_FN_SCL1_D, GPIO_FN_DU1_DOTCLKOUT, GPIO_FN_VI2_FIELD, - GPIO_FN_SDA1_D, GPIO_FN_DU1_EXHSYNC_DU1_HSYNC, GPIO_FN_VI2_HSYNC, - GPIO_FN_VI3_HSYNC, GPIO_FN_DU1_EXVSYNC_DU1_VSYNC, GPIO_FN_VI2_VSYNC, - GPIO_FN_VI3_VSYNC, GPIO_FN_DU1_EXODDF_DU1_ODDF_DISP_CDE, - GPIO_FN_VI2_CLK, GPIO_FN_TX3_B_IRDA_TX_B, GPIO_FN_SD3_CD, - GPIO_FN_HSPI_TX1, GPIO_FN_VI1_CLKENB, GPIO_FN_VI3_CLKENB, - GPIO_FN_AUDIO_CLKC, GPIO_FN_TX2_D, GPIO_FN_SPEEDIN, - GPIO_FN_GPS_SIGN_D, GPIO_FN_DU1_DISP, GPIO_FN_VI2_DATA6_VI2_B6, - GPIO_FN_TCLK0, GPIO_FN_QSTVA_B_QVS_B, GPIO_FN_HSPI_CLK1, - GPIO_FN_SCK2_D, GPIO_FN_AUDIO_CLKOUT_B, GPIO_FN_GPS_MAG_D, - GPIO_FN_DU1_CDE, GPIO_FN_VI2_DATA7_VI2_B7, GPIO_FN_RX3_B_IRDA_RX_B, - GPIO_FN_SD3_WP, GPIO_FN_HSPI_RX1, GPIO_FN_VI1_FIELD, GPIO_FN_VI3_FIELD, - GPIO_FN_AUDIO_CLKOUT, GPIO_FN_RX2_D, GPIO_FN_GPS_CLK_C, - GPIO_FN_GPS_CLK_D, GPIO_FN_AUDIO_CLKA, GPIO_FN_CAN_TXCLK, - GPIO_FN_AUDIO_CLKB, GPIO_FN_USB_OVC2, GPIO_FN_CAN_DEBUGOUT0, - GPIO_FN_MOUT0, - - /* IPSR6 */ - GPIO_FN_SSI_SCK0129, GPIO_FN_CAN_DEBUGOUT1, GPIO_FN_MOUT1, - GPIO_FN_SSI_WS0129, GPIO_FN_CAN_DEBUGOUT2, GPIO_FN_MOUT2, - GPIO_FN_SSI_SDATA0, GPIO_FN_CAN_DEBUGOUT3, GPIO_FN_MOUT5, - GPIO_FN_SSI_SDATA1, GPIO_FN_CAN_DEBUGOUT4, GPIO_FN_MOUT6, - GPIO_FN_SSI_SDATA2, GPIO_FN_CAN_DEBUGOUT5, GPIO_FN_SSI_SCK34, - GPIO_FN_CAN_DEBUGOUT6, GPIO_FN_CAN0_TX_B, GPIO_FN_IERX, - GPIO_FN_SSI_SCK9_C, GPIO_FN_SSI_WS34, GPIO_FN_CAN_DEBUGOUT7, - GPIO_FN_CAN0_RX_B, GPIO_FN_IETX, GPIO_FN_SSI_WS9_C, - GPIO_FN_SSI_SDATA3, GPIO_FN_PWM0_C, GPIO_FN_CAN_DEBUGOUT8, - GPIO_FN_CAN_CLK_B, GPIO_FN_IECLK, GPIO_FN_SCIF_CLK_B, GPIO_FN_TCLK0_B, - GPIO_FN_SSI_SDATA4, GPIO_FN_CAN_DEBUGOUT9, GPIO_FN_SSI_SDATA9_C, - GPIO_FN_SSI_SCK5, GPIO_FN_ADICLK, GPIO_FN_CAN_DEBUGOUT10, - GPIO_FN_SCK3, GPIO_FN_TCLK0_D, GPIO_FN_SSI_WS5, GPIO_FN_ADICS_SAMP, - GPIO_FN_CAN_DEBUGOUT11, GPIO_FN_TX3_IRDA_TX, GPIO_FN_SSI_SDATA5, - GPIO_FN_ADIDATA, GPIO_FN_CAN_DEBUGOUT12, GPIO_FN_RX3_IRDA_RX, - GPIO_FN_SSI_SCK6, GPIO_FN_ADICHS0, GPIO_FN_CAN0_TX, GPIO_FN_IERX_B, - - /* IPSR7 */ - GPIO_FN_SSI_WS6, GPIO_FN_ADICHS1, GPIO_FN_CAN0_RX, GPIO_FN_IETX_B, - GPIO_FN_SSI_SDATA6, GPIO_FN_ADICHS2, GPIO_FN_CAN_CLK, GPIO_FN_IECLK_B, - GPIO_FN_SSI_SCK78, GPIO_FN_CAN_DEBUGOUT13, GPIO_FN_IRQ0_B, - GPIO_FN_SSI_SCK9_B, GPIO_FN_HSPI_CLK1_C, GPIO_FN_SSI_WS78, - GPIO_FN_CAN_DEBUGOUT14, GPIO_FN_IRQ1_B, GPIO_FN_SSI_WS9_B, - GPIO_FN_HSPI_CS1_C, GPIO_FN_SSI_SDATA7, GPIO_FN_CAN_DEBUGOUT15, - GPIO_FN_IRQ2_B, GPIO_FN_TCLK1_C, GPIO_FN_HSPI_TX1_C, - GPIO_FN_SSI_SDATA8, GPIO_FN_VSP, GPIO_FN_IRQ3_B, GPIO_FN_HSPI_RX1_C, - GPIO_FN_SD0_CLK, GPIO_FN_ATACS01, GPIO_FN_SCK1_B, GPIO_FN_SD0_CMD, - GPIO_FN_ATACS11, GPIO_FN_TX1_B, GPIO_FN_CC5_TDO, GPIO_FN_SD0_DAT0, - GPIO_FN_ATADIR1, GPIO_FN_RX1_B, GPIO_FN_CC5_TRST, GPIO_FN_SD0_DAT1, - GPIO_FN_ATAG1, GPIO_FN_SCK2_B, GPIO_FN_CC5_TMS, GPIO_FN_SD0_DAT2, - GPIO_FN_ATARD1, GPIO_FN_TX2_B, GPIO_FN_CC5_TCK, GPIO_FN_SD0_DAT3, - GPIO_FN_ATAWR1, GPIO_FN_RX2_B, GPIO_FN_CC5_TDI, GPIO_FN_SD0_CD, - GPIO_FN_DREQ2, GPIO_FN_RTS1_B_TANS_B, GPIO_FN_SD0_WP, GPIO_FN_DACK2, - GPIO_FN_CTS1_B, - - /* IPSR8 */ - GPIO_FN_HSPI_CLK0, GPIO_FN_CTS0, GPIO_FN_USB_OVC0, GPIO_FN_AD_CLK, - GPIO_FN_CC5_STATE4, GPIO_FN_CC5_STATE12, GPIO_FN_CC5_STATE20, - GPIO_FN_CC5_STATE28, GPIO_FN_CC5_STATE36, GPIO_FN_HSPI_CS0, - GPIO_FN_RTS0_TANS, GPIO_FN_USB_OVC1, GPIO_FN_AD_DI, - GPIO_FN_CC5_STATE5, GPIO_FN_CC5_STATE13, GPIO_FN_CC5_STATE21, - GPIO_FN_CC5_STATE29, GPIO_FN_CC5_STATE37, GPIO_FN_HSPI_TX0, - GPIO_FN_TX0, GPIO_FN_CAN_DEBUG_HW_TRIGGER, GPIO_FN_AD_DO, - GPIO_FN_CC5_STATE6, GPIO_FN_CC5_STATE14, GPIO_FN_CC5_STATE22, - GPIO_FN_CC5_STATE30, GPIO_FN_CC5_STATE38, GPIO_FN_HSPI_RX0, - GPIO_FN_RX0, GPIO_FN_CAN_STEP0, GPIO_FN_AD_NCS, GPIO_FN_CC5_STATE7, - GPIO_FN_CC5_STATE15, GPIO_FN_CC5_STATE23, GPIO_FN_CC5_STATE31, - GPIO_FN_CC5_STATE39, GPIO_FN_FMCLK, GPIO_FN_RDS_CLK, GPIO_FN_PCMOE, - GPIO_FN_BPFCLK, GPIO_FN_PCMWE, GPIO_FN_FMIN, GPIO_FN_RDS_DATA, - GPIO_FN_VI0_CLK, GPIO_FN_MMC1_CLK, GPIO_FN_VI0_CLKENB, GPIO_FN_TX1_C, - GPIO_FN_HTX1_B, GPIO_FN_MT1_SYNC, GPIO_FN_VI0_FIELD, GPIO_FN_RX1_C, - GPIO_FN_HRX1_B, GPIO_FN_VI0_HSYNC, GPIO_FN_VI0_DATA0_B_VI0_B0_B, - GPIO_FN_CTS1_C, GPIO_FN_TX4_D, GPIO_FN_MMC1_CMD, GPIO_FN_HSCK1_B, - GPIO_FN_VI0_VSYNC, GPIO_FN_VI0_DATA1_B_VI0_B1_B, - GPIO_FN_RTS1_C_TANS_C, GPIO_FN_RX4_D, GPIO_FN_PWMFSW0_C, - - /* IPSR9 */ - GPIO_FN_VI0_DATA0_VI0_B0, GPIO_FN_HRTS1_B, GPIO_FN_MT1_VCXO, - GPIO_FN_VI0_DATA1_VI0_B1, GPIO_FN_HCTS1_B, GPIO_FN_MT1_PWM, - GPIO_FN_VI0_DATA2_VI0_B2, GPIO_FN_MMC1_D0, GPIO_FN_VI0_DATA3_VI0_B3, - GPIO_FN_MMC1_D1, GPIO_FN_VI0_DATA4_VI0_B4, GPIO_FN_MMC1_D2, - GPIO_FN_VI0_DATA5_VI0_B5, GPIO_FN_MMC1_D3, GPIO_FN_VI0_DATA6_VI0_B6, - GPIO_FN_MMC1_D4, GPIO_FN_ARM_TRACEDATA_0, GPIO_FN_VI0_DATA7_VI0_B7, - GPIO_FN_MMC1_D5, GPIO_FN_ARM_TRACEDATA_1, GPIO_FN_VI0_G0, - GPIO_FN_SSI_SCK78_C, GPIO_FN_IRQ0, GPIO_FN_ARM_TRACEDATA_2, - GPIO_FN_VI0_G1, GPIO_FN_SSI_WS78_C, GPIO_FN_IRQ1, - GPIO_FN_ARM_TRACEDATA_3, GPIO_FN_VI0_G2, GPIO_FN_ETH_TXD1, - GPIO_FN_MMC1_D6, GPIO_FN_ARM_TRACEDATA_4, GPIO_FN_TS_SPSYNC0, - GPIO_FN_VI0_G3, GPIO_FN_ETH_CRS_DV, GPIO_FN_MMC1_D7, - GPIO_FN_ARM_TRACEDATA_5, GPIO_FN_TS_SDAT0, GPIO_FN_VI0_G4, - GPIO_FN_ETH_TX_EN, GPIO_FN_SD2_DAT0_B, GPIO_FN_ARM_TRACEDATA_6, - GPIO_FN_VI0_G5, GPIO_FN_ETH_RX_ER, GPIO_FN_SD2_DAT1_B, - GPIO_FN_ARM_TRACEDATA_7, GPIO_FN_VI0_G6, GPIO_FN_ETH_RXD0, - GPIO_FN_SD2_DAT2_B, GPIO_FN_ARM_TRACEDATA_8, GPIO_FN_VI0_G7, - GPIO_FN_ETH_RXD1, GPIO_FN_SD2_DAT3_B, GPIO_FN_ARM_TRACEDATA_9, - - /* IPSR10 */ - GPIO_FN_VI0_R0, GPIO_FN_SSI_SDATA7_C, GPIO_FN_SCK1_C, GPIO_FN_DREQ1_B, - GPIO_FN_ARM_TRACEDATA_10, GPIO_FN_DREQ0_C, GPIO_FN_VI0_R1, - GPIO_FN_SSI_SDATA8_C, GPIO_FN_DACK1_B, GPIO_FN_ARM_TRACEDATA_11, - GPIO_FN_DACK0_C, GPIO_FN_DRACK0_C, GPIO_FN_VI0_R2, GPIO_FN_ETH_LINK, - GPIO_FN_SD2_CLK_B, GPIO_FN_IRQ2, GPIO_FN_ARM_TRACEDATA_12, - GPIO_FN_VI0_R3, GPIO_FN_ETH_MAGIC, GPIO_FN_SD2_CMD_B, GPIO_FN_IRQ3, - GPIO_FN_ARM_TRACEDATA_13, GPIO_FN_VI0_R4, GPIO_FN_ETH_REFCLK, - GPIO_FN_SD2_CD_B, GPIO_FN_HSPI_CLK1_B, GPIO_FN_ARM_TRACEDATA_14, - GPIO_FN_MT1_CLK, GPIO_FN_TS_SCK0, GPIO_FN_VI0_R5, GPIO_FN_ETH_TXD0, - GPIO_FN_SD2_WP_B, GPIO_FN_HSPI_CS1_B, GPIO_FN_ARM_TRACEDATA_15, - GPIO_FN_MT1_D, GPIO_FN_TS_SDEN0, GPIO_FN_VI0_R6, GPIO_FN_ETH_MDC, - GPIO_FN_DREQ2_C, GPIO_FN_HSPI_TX1_B, GPIO_FN_TRACECLK, - GPIO_FN_MT1_BEN, GPIO_FN_PWMFSW0_D, GPIO_FN_VI0_R7, GPIO_FN_ETH_MDIO, - GPIO_FN_DACK2_C, GPIO_FN_HSPI_RX1_B, GPIO_FN_SCIF_CLK_D, - GPIO_FN_TRACECTL, GPIO_FN_MT1_PEN, GPIO_FN_VI1_CLK, GPIO_FN_SIM_D, - GPIO_FN_SDA3, GPIO_FN_VI1_HSYNC, GPIO_FN_VI3_CLK, GPIO_FN_SSI_SCK4, - GPIO_FN_GPS_SIGN_C, GPIO_FN_PWMFSW0_E, GPIO_FN_VI1_VSYNC, - GPIO_FN_AUDIO_CLKOUT_C, GPIO_FN_SSI_WS4, GPIO_FN_SIM_CLK, - GPIO_FN_GPS_MAG_C, GPIO_FN_SPV_TRST, GPIO_FN_SCL3, - - /* IPSR11 */ - GPIO_FN_VI1_DATA0_VI1_B0, GPIO_FN_SD2_DAT0, GPIO_FN_SIM_RST, - GPIO_FN_SPV_TCK, GPIO_FN_ADICLK_B, GPIO_FN_VI1_DATA1_VI1_B1, - GPIO_FN_SD2_DAT1, GPIO_FN_MT0_CLK, GPIO_FN_SPV_TMS, - GPIO_FN_ADICS_B_SAMP_B, GPIO_FN_VI1_DATA2_VI1_B2, GPIO_FN_SD2_DAT2, - GPIO_FN_MT0_D, GPIO_FN_SPVTDI, GPIO_FN_ADIDATA_B, - GPIO_FN_VI1_DATA3_VI1_B3, GPIO_FN_SD2_DAT3, GPIO_FN_MT0_BEN, - GPIO_FN_SPV_TDO, GPIO_FN_ADICHS0_B, GPIO_FN_VI1_DATA4_VI1_B4, - GPIO_FN_SD2_CLK, GPIO_FN_MT0_PEN, GPIO_FN_SPA_TRST, - GPIO_FN_HSPI_CLK1_D, GPIO_FN_ADICHS1_B, GPIO_FN_VI1_DATA5_VI1_B5, - GPIO_FN_SD2_CMD, GPIO_FN_MT0_SYNC, GPIO_FN_SPA_TCK, - GPIO_FN_HSPI_CS1_D, GPIO_FN_ADICHS2_B, GPIO_FN_VI1_DATA6_VI1_B6, - GPIO_FN_SD2_CD, GPIO_FN_MT0_VCXO, GPIO_FN_SPA_TMS, GPIO_FN_HSPI_TX1_D, - GPIO_FN_VI1_DATA7_VI1_B7, GPIO_FN_SD2_WP, GPIO_FN_MT0_PWM, - GPIO_FN_SPA_TDI, GPIO_FN_HSPI_RX1_D, GPIO_FN_VI1_G0, GPIO_FN_VI3_DATA0, - GPIO_FN_DU1_DOTCLKOUT1, GPIO_FN_TS_SCK1, GPIO_FN_DREQ2_B, GPIO_FN_TX2, - GPIO_FN_SPA_TDO, GPIO_FN_HCTS0_B, GPIO_FN_VI1_G1, GPIO_FN_VI3_DATA1, - GPIO_FN_SSI_SCK1, GPIO_FN_TS_SDEN1, GPIO_FN_DACK2_B, GPIO_FN_RX2, - GPIO_FN_HRTS0_B, - - /* IPSR12 */ - GPIO_FN_VI1_G2, GPIO_FN_VI3_DATA2, GPIO_FN_SSI_WS1, GPIO_FN_TS_SPSYNC1, - GPIO_FN_SCK2, GPIO_FN_HSCK0_B, GPIO_FN_VI1_G3, GPIO_FN_VI3_DATA3, - GPIO_FN_SSI_SCK2, GPIO_FN_TS_SDAT1, GPIO_FN_SCL1_C, GPIO_FN_HTX0_B, - GPIO_FN_VI1_G4, GPIO_FN_VI3_DATA4, GPIO_FN_SSI_WS2, GPIO_FN_SDA1_C, - GPIO_FN_SIM_RST_B, GPIO_FN_HRX0_B, GPIO_FN_VI1_G5, GPIO_FN_VI3_DATA5, - GPIO_FN_GPS_CLK, GPIO_FN_FSE, GPIO_FN_TX4_B, GPIO_FN_SIM_D_B, - GPIO_FN_VI1_G6, GPIO_FN_VI3_DATA6, GPIO_FN_GPS_SIGN, GPIO_FN_FRB, - GPIO_FN_RX4_B, GPIO_FN_SIM_CLK_B, GPIO_FN_VI1_G7, GPIO_FN_VI3_DATA7, - GPIO_FN_GPS_MAG, GPIO_FN_FCE, GPIO_FN_SCK4_B, -}; +#include <linux/sh_eth.h> struct platform_device; @@ -343,6 +23,20 @@ static inline struct r8a7779_pm_ch *to_r8a7779_ch(struct generic_pm_domain *d) return &container_of(d, struct r8a7779_pm_domain, genpd)->ch; } +extern void r8a7779_init_delay(void); +extern void r8a7779_init_irq(void); +extern void r8a7779_init_irq_extpin(int irlm); +extern void r8a7779_init_irq_dt(void); +extern void r8a7779_map_io(void); +extern void r8a7779_earlytimer_init(void); +extern void r8a7779_add_early_devices(void); +extern void r8a7779_add_standard_devices(void); +extern void r8a7779_add_standard_devices_dt(void); +extern void r8a7779_add_ether_device(struct sh_eth_plat_data *pdata); +extern void r8a7779_clock_init(void); +extern void r8a7779_pinmux_init(void); +extern void r8a7779_pm_init(void); +extern void r8a7779_register_twd(void); extern int r8a7779_sysc_power_down(struct r8a7779_pm_ch *r8a7779_ch); extern int r8a7779_sysc_power_up(struct r8a7779_pm_ch *r8a7779_ch); diff --git a/arch/arm/mach-shmobile/include/mach/r8a7790.h b/arch/arm/mach-shmobile/include/mach/r8a7790.h new file mode 100644 index 000000000000..2e919e61fa0d --- /dev/null +++ b/arch/arm/mach-shmobile/include/mach/r8a7790.h @@ -0,0 +1,9 @@ +#ifndef __ASM_R8A7790_H__ +#define __ASM_R8A7790_H__ + +void r8a7790_add_standard_devices(void); +void r8a7790_clock_init(void); +void r8a7790_pinmux_init(void); +void r8a7790_timer_init(void); + +#endif /* __ASM_R8A7790_H__ */ diff --git a/arch/arm/mach-shmobile/include/mach/sh7372.h b/arch/arm/mach-shmobile/include/mach/sh7372.h index b582facc1cf6..fd7cba024c39 100644 --- a/arch/arm/mach-shmobile/include/mach/sh7372.h +++ b/arch/arm/mach-shmobile/include/mach/sh7372.h @@ -294,21 +294,6 @@ enum { GPIO_FN_D12_NAF12, GPIO_FN_D13_NAF13, GPIO_FN_D14_NAF14, GPIO_FN_D15_NAF15, - /* - * MMCIF(1) (PORT 84, 85, 86, 87, 88, 89, - * 90, 91, 92, 99) - */ - GPIO_FN_MMCD0_0, GPIO_FN_MMCD0_1, GPIO_FN_MMCD0_2, - GPIO_FN_MMCD0_3, GPIO_FN_MMCD0_4, GPIO_FN_MMCD0_5, - GPIO_FN_MMCD0_6, GPIO_FN_MMCD0_7, - GPIO_FN_MMCCMD0, GPIO_FN_MMCCLK0, - - /* MMCIF(2) (PORT 54, 55, 56, 57, 58, 59, 60, 61, 66, 67) */ - GPIO_FN_MMCD1_0, GPIO_FN_MMCD1_1, GPIO_FN_MMCD1_2, - GPIO_FN_MMCD1_3, GPIO_FN_MMCD1_4, GPIO_FN_MMCD1_5, - GPIO_FN_MMCD1_6, GPIO_FN_MMCD1_7, - GPIO_FN_MMCCLK1, GPIO_FN_MMCCMD1, - /* SPU2 (PORT 65) */ GPIO_FN_VINT_I, @@ -416,20 +401,6 @@ enum { /* HDMI (PORT 169, 170) */ GPIO_FN_HDMI_HPD, GPIO_FN_HDMI_CEC, - /* SDHI0 (PORT 171, 172, 173, 174, 175, 176, 177, 178) */ - GPIO_FN_SDHICLK0, GPIO_FN_SDHICD0, - GPIO_FN_SDHICMD0, GPIO_FN_SDHIWP0, - GPIO_FN_SDHID0_0, GPIO_FN_SDHID0_1, - GPIO_FN_SDHID0_2, GPIO_FN_SDHID0_3, - - /* SDHI1 (PORT 179, 180, 181, 182, 183, 184) */ - GPIO_FN_SDHICLK1, GPIO_FN_SDHICMD1, GPIO_FN_SDHID1_0, - GPIO_FN_SDHID1_1, GPIO_FN_SDHID1_2, GPIO_FN_SDHID1_3, - - /* SDHI2 (PORT 185, 186, 187, 188, 189, 190) */ - GPIO_FN_SDHICLK2, GPIO_FN_SDHICMD2, GPIO_FN_SDHID2_0, - GPIO_FN_SDHID2_1, GPIO_FN_SDHID2_2, GPIO_FN_SDHID2_3, - /* SDENC see MSEL4CR 19 */ GPIO_FN_SDENC_CPG, GPIO_FN_SDENC_DV_CLKI, @@ -478,6 +449,18 @@ extern struct clk sh7372_dv_clki_clk; extern struct clk sh7372_dv_clki_div2_clk; extern struct clk sh7372_pllc2_clk; +extern void sh7372_init_irq(void); +extern void sh7372_map_io(void); +extern void sh7372_earlytimer_init(void); +extern void sh7372_add_early_devices(void); +extern void sh7372_add_standard_devices(void); +extern void sh7372_add_early_devices_dt(void); +extern void sh7372_add_standard_devices_dt(void); +extern void sh7372_clock_init(void); +extern void sh7372_pinmux_init(void); +extern void sh7372_pm_init(void); +extern void sh7372_resume_core_standby_sysc(void); +extern int sh7372_do_idle_sysc(unsigned long sleep_mode); extern void sh7372_intcs_suspend(void); extern void sh7372_intcs_resume(void); extern void sh7372_intca_suspend(void); diff --git a/arch/arm/mach-shmobile/include/mach/sh73a0.h b/arch/arm/mach-shmobile/include/mach/sh73a0.h index 606d31d02a4e..eb7a4320d487 100644 --- a/arch/arm/mach-shmobile/include/mach/sh73a0.h +++ b/arch/arm/mach-shmobile/include/mach/sh73a0.h @@ -94,8 +94,7 @@ enum { GPIO_PORT305, GPIO_PORT306, GPIO_PORT307, GPIO_PORT308, GPIO_PORT309, /* Table 25-1 (Function 0-7) */ - GPIO_FN_VBUS_0, - GPIO_FN_GPI0, + GPIO_FN_GPI0 = 310, GPIO_FN_GPI1, GPIO_FN_GPI2, GPIO_FN_GPI3, @@ -103,15 +102,11 @@ enum { GPIO_FN_GPI5, GPIO_FN_GPI6, GPIO_FN_GPI7, - GPIO_FN_SCIFA7_RXD, - GPIO_FN_SCIFA7_CTS_, GPIO_FN_GPO7, GPIO_FN_MFG0_OUT2, GPIO_FN_GPO6, GPIO_FN_MFG1_OUT2, - GPIO_FN_GPO5, GPIO_FN_SCIFA0_SCK, GPIO_FN_FSICOSLDT3, \ + GPIO_FN_GPO5, GPIO_FN_PORT16_VIO_CKOR, - GPIO_FN_SCIFA0_TXD, - GPIO_FN_SCIFA7_TXD, - GPIO_FN_SCIFA7_RTS_, GPIO_FN_PORT19_VIO_CKO2, + GPIO_FN_PORT19_VIO_CKO2, GPIO_FN_GPO0, GPIO_FN_GPO1, GPIO_FN_GPO2, GPIO_FN_STATUS0, @@ -119,83 +114,44 @@ enum { GPIO_FN_GPO4, GPIO_FN_STATUS2, GPIO_FN_VINT, GPIO_FN_TCKON, - GPIO_FN_XDVFS1, GPIO_FN_PORT27_I2C_SCL2, GPIO_FN_PORT27_I2C_SCL3, \ + GPIO_FN_XDVFS1, GPIO_FN_MFG0_OUT1, GPIO_FN_PORT27_IROUT, - GPIO_FN_XDVFS2, GPIO_FN_PORT28_I2C_SDA2, GPIO_FN_PORT28_I2C_SDA3, \ + GPIO_FN_XDVFS2, GPIO_FN_PORT28_TPU1TO1, GPIO_FN_SIM_RST, GPIO_FN_PORT29_TPU1TO1, GPIO_FN_SIM_CLK, GPIO_FN_PORT30_VIO_CKOR, GPIO_FN_SIM_D, GPIO_FN_PORT31_IROUT, - GPIO_FN_SCIFA4_TXD, - GPIO_FN_SCIFA4_RXD, GPIO_FN_XWUP, - GPIO_FN_SCIFA4_RTS_, - GPIO_FN_SCIFA4_CTS_, - GPIO_FN_FSIBOBT, GPIO_FN_FSIBIBT, - GPIO_FN_FSIBOLR, GPIO_FN_FSIBILR, - GPIO_FN_FSIBOSLD, - GPIO_FN_FSIBISLD, + GPIO_FN_XWUP, GPIO_FN_VACK, GPIO_FN_XTAL1L, - GPIO_FN_SCIFA0_RTS_, GPIO_FN_FSICOSLDT2, - GPIO_FN_SCIFA0_RXD, - GPIO_FN_SCIFA0_CTS_, GPIO_FN_FSICOSLDT1, - GPIO_FN_FSICOBT, GPIO_FN_FSICIBT, GPIO_FN_FSIDOBT, GPIO_FN_FSIDIBT, - GPIO_FN_FSICOLR, GPIO_FN_FSICILR, GPIO_FN_FSIDOLR, GPIO_FN_FSIDILR, - GPIO_FN_FSICOSLD, GPIO_FN_PORT47_FSICSPDIF, - GPIO_FN_FSICISLD, GPIO_FN_FSIDISLD, - GPIO_FN_FSIACK, GPIO_FN_PORT49_IRDA_OUT, GPIO_FN_PORT49_IROUT, \ - GPIO_FN_FSIAOMC, - GPIO_FN_FSIAOLR, GPIO_FN_BBIF2_TSYNC2, GPIO_FN_TPU2TO2, GPIO_FN_FSIAILR, - - GPIO_FN_FSIAOBT, GPIO_FN_BBIF2_TSCK2, GPIO_FN_TPU2TO3, GPIO_FN_FSIAIBT, - GPIO_FN_FSIAOSLD, GPIO_FN_BBIF2_TXD2, - GPIO_FN_FSIASPDIF, GPIO_FN_PORT53_IRDA_IN, GPIO_FN_TPU3TO3, \ - GPIO_FN_FSIBSPDIF, GPIO_FN_PORT53_FSICSPDIF, - GPIO_FN_FSIBCK, GPIO_FN_PORT54_IRDA_FIRSEL, GPIO_FN_TPU3TO2, \ - GPIO_FN_FSIBOMC, GPIO_FN_FSICCK, GPIO_FN_FSICOMC, - GPIO_FN_FSIAISLD, GPIO_FN_TPU0TO0, + GPIO_FN_PORT49_IROUT, + GPIO_FN_BBIF2_TSYNC2, GPIO_FN_TPU2TO2, + + GPIO_FN_BBIF2_TSCK2, GPIO_FN_TPU2TO3, + GPIO_FN_BBIF2_TXD2, + GPIO_FN_TPU3TO3, + GPIO_FN_TPU3TO2, + GPIO_FN_TPU0TO0, GPIO_FN_A0, GPIO_FN_BS_, - GPIO_FN_A12, GPIO_FN_PORT58_KEYOUT7, GPIO_FN_TPU4TO2, - GPIO_FN_A13, GPIO_FN_PORT59_KEYOUT6, GPIO_FN_TPU0TO1, - GPIO_FN_A14, GPIO_FN_KEYOUT5, - GPIO_FN_A15, GPIO_FN_KEYOUT4, - GPIO_FN_A16, GPIO_FN_KEYOUT3, GPIO_FN_MSIOF0_SS1, - GPIO_FN_A17, GPIO_FN_KEYOUT2, GPIO_FN_MSIOF0_TSYNC, - GPIO_FN_A18, GPIO_FN_KEYOUT1, GPIO_FN_MSIOF0_TSCK, - GPIO_FN_A19, GPIO_FN_KEYOUT0, GPIO_FN_MSIOF0_TXD, - GPIO_FN_A20, GPIO_FN_KEYIN0, GPIO_FN_MSIOF0_RSCK, - GPIO_FN_A21, GPIO_FN_KEYIN1, GPIO_FN_MSIOF0_RSYNC, - GPIO_FN_A22, GPIO_FN_KEYIN2, GPIO_FN_MSIOF0_MCK0, - GPIO_FN_A23, GPIO_FN_KEYIN3, GPIO_FN_MSIOF0_MCK1, - GPIO_FN_A24, GPIO_FN_KEYIN4, GPIO_FN_MSIOF0_RXD, - GPIO_FN_A25, GPIO_FN_KEYIN5, GPIO_FN_MSIOF0_SS2, - GPIO_FN_A26, GPIO_FN_KEYIN6, - GPIO_FN_KEYIN7, - GPIO_FN_D0_NAF0, - GPIO_FN_D1_NAF1, - GPIO_FN_D2_NAF2, - GPIO_FN_D3_NAF3, - GPIO_FN_D4_NAF4, - GPIO_FN_D5_NAF5, - GPIO_FN_D6_NAF6, - GPIO_FN_D7_NAF7, - GPIO_FN_D8_NAF8, - GPIO_FN_D9_NAF9, - GPIO_FN_D10_NAF10, - GPIO_FN_D11_NAF11, - GPIO_FN_D12_NAF12, - GPIO_FN_D13_NAF13, - GPIO_FN_D14_NAF14, - GPIO_FN_D15_NAF15, - GPIO_FN_CS4_, - GPIO_FN_CS5A_, GPIO_FN_PORT91_RDWR, - GPIO_FN_CS5B_, GPIO_FN_FCE1_, - GPIO_FN_CS6B_, GPIO_FN_DACK0, - GPIO_FN_FCE0_, GPIO_FN_CS6A_, + GPIO_FN_A12, GPIO_FN_TPU4TO2, + GPIO_FN_A13, GPIO_FN_TPU0TO1, + GPIO_FN_A14, + GPIO_FN_A15, + GPIO_FN_A16, GPIO_FN_MSIOF0_SS1, + GPIO_FN_A17, GPIO_FN_MSIOF0_TSYNC, + GPIO_FN_A18, GPIO_FN_MSIOF0_TSCK, + GPIO_FN_A19, GPIO_FN_MSIOF0_TXD, + GPIO_FN_A20, GPIO_FN_MSIOF0_RSCK, + GPIO_FN_A21, GPIO_FN_MSIOF0_RSYNC, + GPIO_FN_A22, GPIO_FN_MSIOF0_MCK0, + GPIO_FN_A23, GPIO_FN_MSIOF0_MCK1, + GPIO_FN_A24, GPIO_FN_MSIOF0_RXD, + GPIO_FN_A25, GPIO_FN_MSIOF0_SS2, + GPIO_FN_A26, + GPIO_FN_FCE1_, + GPIO_FN_DACK0, + GPIO_FN_FCE0_, GPIO_FN_WAIT_, GPIO_FN_DREQ0, - GPIO_FN_RD__FSC, - GPIO_FN_WE0__FWE, GPIO_FN_RDWR_FWE, - GPIO_FN_WE1_, GPIO_FN_FRB, GPIO_FN_CKO, GPIO_FN_NBRSTOUT_, @@ -204,145 +160,118 @@ enum { GPIO_FN_BBIF2_RXD, GPIO_FN_BBIF2_SYNC, GPIO_FN_BBIF2_SCK, - GPIO_FN_SCIFA3_CTS_, GPIO_FN_MFG3_IN2, - GPIO_FN_SCIFA3_RXD, GPIO_FN_MFG3_IN1, - GPIO_FN_BBIF1_SS2, GPIO_FN_SCIFA3_RTS_, GPIO_FN_MFG3_OUT1, - GPIO_FN_SCIFA3_TXD, + GPIO_FN_MFG3_IN2, + GPIO_FN_MFG3_IN1, + GPIO_FN_BBIF1_SS2, GPIO_FN_MFG3_OUT1, GPIO_FN_HSI_RX_DATA, GPIO_FN_BBIF1_RXD, GPIO_FN_HSI_TX_WAKE, GPIO_FN_BBIF1_TSCK, GPIO_FN_HSI_TX_DATA, GPIO_FN_BBIF1_TSYNC, GPIO_FN_HSI_TX_READY, GPIO_FN_BBIF1_TXD, - GPIO_FN_HSI_RX_READY, GPIO_FN_BBIF1_RSCK, GPIO_FN_PORT115_I2C_SCL2, \ - GPIO_FN_PORT115_I2C_SCL3, - GPIO_FN_HSI_RX_WAKE, GPIO_FN_BBIF1_RSYNC, GPIO_FN_PORT116_I2C_SDA2, \ - GPIO_FN_PORT116_I2C_SDA3, + GPIO_FN_HSI_RX_READY, GPIO_FN_BBIF1_RSCK, + GPIO_FN_HSI_RX_WAKE, GPIO_FN_BBIF1_RSYNC, GPIO_FN_HSI_RX_FLAG, GPIO_FN_BBIF1_SS1, GPIO_FN_BBIF1_FLOW, GPIO_FN_HSI_TX_FLAG, - GPIO_FN_VIO_VD, GPIO_FN_PORT128_LCD2VSYN, GPIO_FN_VIO2_VD, \ - GPIO_FN_LCD2D0, - - GPIO_FN_VIO_HD, GPIO_FN_PORT129_LCD2HSYN, GPIO_FN_PORT129_LCD2CS_, \ - GPIO_FN_VIO2_HD, GPIO_FN_LCD2D1, - GPIO_FN_VIO_D0, GPIO_FN_PORT130_MSIOF2_RXD, GPIO_FN_LCD2D10, - GPIO_FN_VIO_D1, GPIO_FN_PORT131_KEYOUT6, GPIO_FN_PORT131_MSIOF2_SS1, \ - GPIO_FN_PORT131_KEYOUT11, GPIO_FN_LCD2D11, - GPIO_FN_VIO_D2, GPIO_FN_PORT132_KEYOUT7, GPIO_FN_PORT132_MSIOF2_SS2, \ - GPIO_FN_PORT132_KEYOUT10, GPIO_FN_LCD2D12, - GPIO_FN_VIO_D3, GPIO_FN_MSIOF2_TSYNC, GPIO_FN_LCD2D13, - GPIO_FN_VIO_D4, GPIO_FN_MSIOF2_TXD, GPIO_FN_LCD2D14, - GPIO_FN_VIO_D5, GPIO_FN_MSIOF2_TSCK, GPIO_FN_LCD2D15, - GPIO_FN_VIO_D6, GPIO_FN_PORT136_KEYOUT8, GPIO_FN_LCD2D16, - GPIO_FN_VIO_D7, GPIO_FN_PORT137_KEYOUT9, GPIO_FN_LCD2D17, - GPIO_FN_VIO_D8, GPIO_FN_PORT138_KEYOUT8, GPIO_FN_VIO2_D0, \ - GPIO_FN_LCD2D6, - GPIO_FN_VIO_D9, GPIO_FN_PORT139_KEYOUT9, GPIO_FN_VIO2_D1, \ - GPIO_FN_LCD2D7, - GPIO_FN_VIO_D10, GPIO_FN_TPU0TO2, GPIO_FN_VIO2_D2, GPIO_FN_LCD2D8, - GPIO_FN_VIO_D11, GPIO_FN_TPU0TO3, GPIO_FN_VIO2_D3, GPIO_FN_LCD2D9, - GPIO_FN_VIO_D12, GPIO_FN_PORT142_KEYOUT10, GPIO_FN_VIO2_D4, \ - GPIO_FN_LCD2D2, - GPIO_FN_VIO_D13, GPIO_FN_PORT143_KEYOUT11, GPIO_FN_PORT143_KEYOUT6, \ - GPIO_FN_VIO2_D5, GPIO_FN_LCD2D3, - GPIO_FN_VIO_D14, GPIO_FN_PORT144_KEYOUT7, GPIO_FN_VIO2_D6, \ - GPIO_FN_LCD2D4, - GPIO_FN_VIO_D15, GPIO_FN_TPU1TO3, GPIO_FN_PORT145_LCD2DISP, \ - GPIO_FN_PORT145_LCD2RS, GPIO_FN_VIO2_D7, GPIO_FN_LCD2D5, - GPIO_FN_VIO_CLK, GPIO_FN_LCD2DCK, GPIO_FN_PORT146_LCD2WR_, \ - GPIO_FN_VIO2_CLK, GPIO_FN_LCD2D18, - GPIO_FN_VIO_FIELD, GPIO_FN_LCD2RD_, GPIO_FN_VIO2_FIELD, GPIO_FN_LCD2D19, + GPIO_FN_VIO_VD, GPIO_FN_VIO2_VD, + + GPIO_FN_VIO_HD, + GPIO_FN_VIO2_HD, + GPIO_FN_VIO_D0, GPIO_FN_PORT130_MSIOF2_RXD, + GPIO_FN_VIO_D1, GPIO_FN_PORT131_MSIOF2_SS1, + GPIO_FN_VIO_D2, GPIO_FN_PORT132_MSIOF2_SS2, + GPIO_FN_VIO_D3, GPIO_FN_MSIOF2_TSYNC, + GPIO_FN_VIO_D4, GPIO_FN_MSIOF2_TXD, + GPIO_FN_VIO_D5, GPIO_FN_MSIOF2_TSCK, + GPIO_FN_VIO_D6, + GPIO_FN_VIO_D7, + GPIO_FN_VIO_D8, GPIO_FN_VIO2_D0, + GPIO_FN_VIO_D9, GPIO_FN_VIO2_D1, + GPIO_FN_VIO_D10, GPIO_FN_TPU0TO2, GPIO_FN_VIO2_D2, + GPIO_FN_VIO_D11, GPIO_FN_TPU0TO3, GPIO_FN_VIO2_D3, + GPIO_FN_VIO_D12, GPIO_FN_VIO2_D4, + GPIO_FN_VIO_D13, + GPIO_FN_VIO2_D5, + GPIO_FN_VIO_D14, GPIO_FN_VIO2_D6, + GPIO_FN_VIO_D15, GPIO_FN_TPU1TO3, + GPIO_FN_VIO2_D7, + GPIO_FN_VIO_CLK, + GPIO_FN_VIO2_CLK, + GPIO_FN_VIO_FIELD, GPIO_FN_VIO2_FIELD, GPIO_FN_VIO_CKO, - GPIO_FN_A27, GPIO_FN_PORT149_RDWR, GPIO_FN_MFG0_IN1, \ - GPIO_FN_PORT149_KEYOUT9, + GPIO_FN_A27, GPIO_FN_MFG0_IN1, GPIO_FN_MFG0_IN2, GPIO_FN_TS_SPSYNC3, GPIO_FN_MSIOF2_RSCK, GPIO_FN_TS_SDAT3, GPIO_FN_MSIOF2_RSYNC, GPIO_FN_TPU1TO2, GPIO_FN_TS_SDEN3, GPIO_FN_PORT153_MSIOF2_SS1, - GPIO_FN_SCIFA2_TXD1, GPIO_FN_MSIOF2_MCK0, - GPIO_FN_SCIFA2_RXD1, GPIO_FN_MSIOF2_MCK1, - GPIO_FN_SCIFA2_RTS1_, GPIO_FN_PORT156_MSIOF2_SS2, - GPIO_FN_SCIFA2_CTS1_, GPIO_FN_PORT157_MSIOF2_RXD, - GPIO_FN_DINT_, GPIO_FN_SCIFA2_SCK1, GPIO_FN_TS_SCK3, - GPIO_FN_PORT159_SCIFB_SCK, GPIO_FN_PORT159_SCIFA5_SCK, GPIO_FN_NMI, - GPIO_FN_PORT160_SCIFB_TXD, GPIO_FN_PORT160_SCIFA5_TXD, - GPIO_FN_PORT161_SCIFB_CTS_, GPIO_FN_PORT161_SCIFA5_CTS_, - GPIO_FN_PORT162_SCIFB_RXD, GPIO_FN_PORT162_SCIFA5_RXD, - GPIO_FN_PORT163_SCIFB_RTS_, GPIO_FN_PORT163_SCIFA5_RTS_, \ + GPIO_FN_MSIOF2_MCK0, + GPIO_FN_MSIOF2_MCK1, + GPIO_FN_PORT156_MSIOF2_SS2, + GPIO_FN_PORT157_MSIOF2_RXD, + GPIO_FN_DINT_, GPIO_FN_TS_SCK3, + GPIO_FN_NMI, GPIO_FN_TPU3TO0, - GPIO_FN_LCDD0, - GPIO_FN_LCDD1, GPIO_FN_PORT193_SCIFA5_CTS_, GPIO_FN_BBIF2_TSYNC1, - GPIO_FN_LCDD2, GPIO_FN_PORT194_SCIFA5_RTS_, GPIO_FN_BBIF2_TSCK1, - GPIO_FN_LCDD3, GPIO_FN_PORT195_SCIFA5_RXD, GPIO_FN_BBIF2_TXD1, - GPIO_FN_LCDD4, GPIO_FN_PORT196_SCIFA5_TXD, - GPIO_FN_LCDD5, GPIO_FN_PORT197_SCIFA5_SCK, GPIO_FN_MFG2_OUT2, \ + GPIO_FN_BBIF2_TSYNC1, + GPIO_FN_BBIF2_TSCK1, + GPIO_FN_BBIF2_TXD1, + GPIO_FN_MFG2_OUT2, GPIO_FN_TPU2TO1, - GPIO_FN_LCDD6, - GPIO_FN_LCDD7, GPIO_FN_TPU4TO1, GPIO_FN_MFG4_OUT2, - GPIO_FN_LCDD8, GPIO_FN_D16, - GPIO_FN_LCDD9, GPIO_FN_D17, - GPIO_FN_LCDD10, GPIO_FN_D18, - GPIO_FN_LCDD11, GPIO_FN_D19, - GPIO_FN_LCDD12, GPIO_FN_D20, - GPIO_FN_LCDD13, GPIO_FN_D21, - GPIO_FN_LCDD14, GPIO_FN_D22, - GPIO_FN_LCDD15, GPIO_FN_PORT207_MSIOF0L_SS1, GPIO_FN_D23, - GPIO_FN_LCDD16, GPIO_FN_PORT208_MSIOF0L_SS2, GPIO_FN_D24, - GPIO_FN_LCDD17, GPIO_FN_D25, - GPIO_FN_LCDD18, GPIO_FN_DREQ2, GPIO_FN_PORT210_MSIOF0L_SS1, GPIO_FN_D26, - GPIO_FN_LCDD19, GPIO_FN_PORT211_MSIOF0L_SS2, GPIO_FN_D27, - GPIO_FN_LCDD20, GPIO_FN_TS_SPSYNC1, GPIO_FN_MSIOF0L_MCK0, GPIO_FN_D28, - GPIO_FN_LCDD21, GPIO_FN_TS_SDAT1, GPIO_FN_MSIOF0L_MCK1, GPIO_FN_D29, - GPIO_FN_LCDD22, GPIO_FN_TS_SDEN1, GPIO_FN_MSIOF0L_RSCK, GPIO_FN_D30, - GPIO_FN_LCDD23, GPIO_FN_TS_SCK1, GPIO_FN_MSIOF0L_RSYNC, GPIO_FN_D31, - GPIO_FN_LCDDCK, GPIO_FN_LCDWR_, - GPIO_FN_LCDRD_, GPIO_FN_DACK2, GPIO_FN_PORT217_LCD2RS, \ - GPIO_FN_MSIOF0L_TSYNC, GPIO_FN_VIO2_FIELD3, GPIO_FN_PORT217_LCD2DISP, - GPIO_FN_LCDHSYN, GPIO_FN_LCDCS_, GPIO_FN_LCDCS2_, GPIO_FN_DACK3, \ + GPIO_FN_TPU4TO1, GPIO_FN_MFG4_OUT2, + GPIO_FN_D16, + GPIO_FN_D17, + GPIO_FN_D18, + GPIO_FN_D19, + GPIO_FN_D20, + GPIO_FN_D21, + GPIO_FN_D22, + GPIO_FN_PORT207_MSIOF0L_SS1, GPIO_FN_D23, + GPIO_FN_PORT208_MSIOF0L_SS2, GPIO_FN_D24, + GPIO_FN_D25, + GPIO_FN_DREQ2, GPIO_FN_PORT210_MSIOF0L_SS1, GPIO_FN_D26, + GPIO_FN_PORT211_MSIOF0L_SS2, GPIO_FN_D27, + GPIO_FN_TS_SPSYNC1, GPIO_FN_MSIOF0L_MCK0, GPIO_FN_D28, + GPIO_FN_TS_SDAT1, GPIO_FN_MSIOF0L_MCK1, GPIO_FN_D29, + GPIO_FN_TS_SDEN1, GPIO_FN_MSIOF0L_RSCK, GPIO_FN_D30, + GPIO_FN_TS_SCK1, GPIO_FN_MSIOF0L_RSYNC, GPIO_FN_D31, + GPIO_FN_DACK2, + GPIO_FN_MSIOF0L_TSYNC, GPIO_FN_VIO2_FIELD3, + GPIO_FN_DACK3, GPIO_FN_PORT218_VIO_CKOR, - GPIO_FN_LCDDISP, GPIO_FN_LCDRS, GPIO_FN_PORT219_LCD2WR_, \ GPIO_FN_DREQ3, GPIO_FN_MSIOF0L_TSCK, GPIO_FN_VIO2_CLK3, \ - GPIO_FN_LCD2DCK_2, - GPIO_FN_LCDVSYN, GPIO_FN_LCDVSYN2, - GPIO_FN_LCDLCLK, GPIO_FN_DREQ1, GPIO_FN_PORT221_LCD2CS_, \ + GPIO_FN_DREQ1, GPIO_FN_PWEN, GPIO_FN_MSIOF0L_RXD, GPIO_FN_VIO2_HD3, \ - GPIO_FN_PORT221_LCD2HSYN, - GPIO_FN_LCDDON, GPIO_FN_LCDDON2, GPIO_FN_DACK1, GPIO_FN_OVCN, \ - GPIO_FN_MSIOF0L_TXD, GPIO_FN_VIO2_VD3, GPIO_FN_PORT222_LCD2VSYN, - - GPIO_FN_SCIFA1_TXD, GPIO_FN_OVCN2, - GPIO_FN_EXTLP, GPIO_FN_SCIFA1_SCK, GPIO_FN_PORT226_VIO_CKO2, - GPIO_FN_SCIFA1_RTS_, GPIO_FN_IDIN, - GPIO_FN_SCIFA1_RXD, - GPIO_FN_SCIFA1_CTS_, GPIO_FN_MFG1_IN1, - GPIO_FN_MSIOF1_TXD, GPIO_FN_SCIFA2_TXD2, - GPIO_FN_MSIOF1_TSYNC, GPIO_FN_SCIFA2_CTS2_, - GPIO_FN_MSIOF1_TSCK, GPIO_FN_SCIFA2_SCK2, - GPIO_FN_MSIOF1_RXD, GPIO_FN_SCIFA2_RXD2, - GPIO_FN_MSIOF1_RSCK, GPIO_FN_SCIFA2_RTS2_, GPIO_FN_VIO2_CLK2, \ - GPIO_FN_LCD2D20, + GPIO_FN_DACK1, GPIO_FN_OVCN, + GPIO_FN_MSIOF0L_TXD, GPIO_FN_VIO2_VD3, + + GPIO_FN_OVCN2, + GPIO_FN_EXTLP, GPIO_FN_PORT226_VIO_CKO2, + GPIO_FN_IDIN, + GPIO_FN_MFG1_IN1, + GPIO_FN_MSIOF1_TXD, + GPIO_FN_MSIOF1_TSYNC, + GPIO_FN_MSIOF1_TSCK, + GPIO_FN_MSIOF1_RXD, + GPIO_FN_MSIOF1_RSCK, GPIO_FN_VIO2_CLK2, GPIO_FN_MSIOF1_RSYNC, GPIO_FN_MFG1_IN2, GPIO_FN_VIO2_VD2, \ - GPIO_FN_LCD2D21, - GPIO_FN_MSIOF1_MCK0, GPIO_FN_PORT236_I2C_SDA2, - GPIO_FN_MSIOF1_MCK1, GPIO_FN_PORT237_I2C_SCL2, - GPIO_FN_MSIOF1_SS1, GPIO_FN_VIO2_FIELD2, GPIO_FN_LCD2D22, - GPIO_FN_MSIOF1_SS2, GPIO_FN_VIO2_HD2, GPIO_FN_LCD2D23, - GPIO_FN_SCIFA6_TXD, - GPIO_FN_PORT241_IRDA_OUT, GPIO_FN_PORT241_IROUT, GPIO_FN_MFG4_OUT1, \ + GPIO_FN_MSIOF1_MCK0, + GPIO_FN_MSIOF1_MCK1, + GPIO_FN_MSIOF1_SS1, GPIO_FN_VIO2_FIELD2, + GPIO_FN_MSIOF1_SS2, GPIO_FN_VIO2_HD2, + GPIO_FN_PORT241_IROUT, GPIO_FN_MFG4_OUT1, \ GPIO_FN_TPU4TO0, - GPIO_FN_PORT242_IRDA_IN, GPIO_FN_MFG4_IN2, - GPIO_FN_PORT243_IRDA_FIRSEL, GPIO_FN_PORT243_VIO_CKO2, - GPIO_FN_PORT244_SCIFA5_CTS_, GPIO_FN_MFG2_IN1, \ - GPIO_FN_PORT244_SCIFB_CTS_, GPIO_FN_MSIOF2R_RXD, - GPIO_FN_PORT245_SCIFA5_RTS_, GPIO_FN_MFG2_IN2, \ - GPIO_FN_PORT245_SCIFB_RTS_, GPIO_FN_MSIOF2R_TXD, - GPIO_FN_PORT246_SCIFA5_RXD, GPIO_FN_MFG1_OUT1, \ - GPIO_FN_PORT246_SCIFB_RXD, GPIO_FN_TPU1TO0, - GPIO_FN_PORT247_SCIFA5_TXD, GPIO_FN_MFG3_OUT2, \ - GPIO_FN_PORT247_SCIFB_TXD, GPIO_FN_TPU3TO1, - GPIO_FN_PORT248_SCIFA5_SCK, GPIO_FN_MFG2_OUT1, \ - GPIO_FN_PORT248_SCIFB_SCK, GPIO_FN_TPU2TO0, \ - GPIO_FN_PORT248_I2C_SCL3, GPIO_FN_MSIOF2R_TSCK, + GPIO_FN_MFG4_IN2, + GPIO_FN_PORT243_VIO_CKO2, + GPIO_FN_MFG2_IN1, + GPIO_FN_MSIOF2R_RXD, + GPIO_FN_MFG2_IN2, + GPIO_FN_MSIOF2R_TXD, + GPIO_FN_MFG1_OUT1, + GPIO_FN_TPU1TO0, + GPIO_FN_MFG3_OUT2, + GPIO_FN_TPU3TO1, + GPIO_FN_MFG2_OUT1, + GPIO_FN_TPU2TO0, + GPIO_FN_MSIOF2R_TSCK, GPIO_FN_PORT249_IROUT, GPIO_FN_MFG4_IN1, \ - GPIO_FN_PORT249_I2C_SDA3, GPIO_FN_MSIOF2R_TSYNC, + GPIO_FN_MSIOF2R_TSYNC, GPIO_FN_SDHICLK0, GPIO_FN_SDHICD0, GPIO_FN_SDHID0_0, @@ -435,54 +364,12 @@ enum { GPIO_FN_IRQ9_MEM_INT, GPIO_FN_IRQ9_MCP_INT, GPIO_FN_A11, - GPIO_FN_KEYOUT8, GPIO_FN_TPU4TO3, GPIO_FN_RESETA_N_PU_ON, GPIO_FN_RESETA_N_PU_OFF, GPIO_FN_EDBGREQ_PD, GPIO_FN_EDBGREQ_PU, - /* Functions with pull-ups */ - GPIO_FN_KEYIN0_PU, - GPIO_FN_KEYIN1_PU, - GPIO_FN_KEYIN2_PU, - GPIO_FN_KEYIN3_PU, - GPIO_FN_KEYIN4_PU, - GPIO_FN_KEYIN5_PU, - GPIO_FN_KEYIN6_PU, - GPIO_FN_KEYIN7_PU, - GPIO_FN_SDHICD0_PU, - GPIO_FN_SDHID0_0_PU, - GPIO_FN_SDHID0_1_PU, - GPIO_FN_SDHID0_2_PU, - GPIO_FN_SDHID0_3_PU, - GPIO_FN_SDHICMD0_PU, - GPIO_FN_SDHIWP0_PU, - GPIO_FN_SDHID1_0_PU, - GPIO_FN_SDHID1_1_PU, - GPIO_FN_SDHID1_2_PU, - GPIO_FN_SDHID1_3_PU, - GPIO_FN_SDHICMD1_PU, - GPIO_FN_SDHID2_0_PU, - GPIO_FN_SDHID2_1_PU, - GPIO_FN_SDHID2_2_PU, - GPIO_FN_SDHID2_3_PU, - GPIO_FN_SDHICMD2_PU, - GPIO_FN_MMCCMD0_PU, - GPIO_FN_MMCCMD1_PU, - GPIO_FN_MMCD0_0_PU, - GPIO_FN_MMCD0_1_PU, - GPIO_FN_MMCD0_2_PU, - GPIO_FN_MMCD0_3_PU, - GPIO_FN_MMCD0_4_PU, - GPIO_FN_MMCD0_5_PU, - GPIO_FN_MMCD0_6_PU, - GPIO_FN_MMCD0_7_PU, - GPIO_FN_FSIACK_PU, - GPIO_FN_FSIAILR_PU, - GPIO_FN_FSIAIBT_PU, - GPIO_FN_FSIAISLD_PU, - /* end of GPIO */ GPIO_NR, }; @@ -557,6 +444,21 @@ enum { #define SH73A0_PINT0_IRQ(irq) ((irq) + 700) #define SH73A0_PINT1_IRQ(irq) ((irq) + 732) +extern void sh73a0_init_delay(void); +extern void sh73a0_init_irq(void); +extern void sh73a0_init_irq_dt(void); +extern void sh73a0_map_io(void); +extern void sh73a0_earlytimer_init(void); +extern void sh73a0_add_early_devices(void); +extern void sh73a0_add_standard_devices(void); +extern void sh73a0_add_standard_devices_dt(void); +extern void sh73a0_clock_init(void); +extern void sh73a0_pinmux_init(void); +extern void sh73a0_pm_init(void); +extern struct clk sh73a0_extal1_clk; +extern struct clk sh73a0_extal2_clk; +extern struct clk sh73a0_extcki_clk; +extern struct clk sh73a0_extalr_clk; extern struct smp_operations sh73a0_smp_ops; #endif /* __ASM_SH73A0_H__ */ diff --git a/arch/arm/mach-shmobile/intc-r8a7740.c b/arch/arm/mach-shmobile/intc-r8a7740.c index 9a69a31918ba..b741c8409a5a 100644 --- a/arch/arm/mach-shmobile/intc-r8a7740.c +++ b/arch/arm/mach-shmobile/intc-r8a7740.c @@ -18,620 +18,39 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -#include <linux/kernel.h> #include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/irq.h> #include <linux/io.h> -#include <linux/sh_intc.h> -#include <mach/intc.h> -#include <mach/irqs.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -/* - * INTCA - */ -enum { - UNUSED_INTCA = 0, - - /* interrupt sources INTCA */ - DIRC, - ATAPI, - IIC1_ALI, IIC1_TACKI, IIC1_WAITI, IIC1_DTEI, - AP_ARM_COMMTX, AP_ARM_COMMRX, - MFI, MFIS, - BBIF1, BBIF2, - USBHSDMAC, - USBF_OUL_SOF, USBF_IXL_INT, - SGX540, - CMT1_0, CMT1_1, CMT1_2, CMT1_3, - CMT2, - CMT3, - KEYSC, - SCIFA0, SCIFA1, SCIFA2, SCIFA3, - MSIOF2, MSIOF1, - SCIFA4, SCIFA5, SCIFB, - FLCTL_FLSTEI, FLCTL_FLTENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I, - SDHI0_0, SDHI0_1, SDHI0_2, SDHI0_3, - SDHI1_0, SDHI1_1, SDHI1_2, SDHI1_3, - AP_ARM_L2CINT, - IRDA, - TPU0, - SCIFA6, SCIFA7, - GbEther, - ICBS0, - DDM, - SDHI2_0, SDHI2_1, SDHI2_2, SDHI2_3, - RWDT0, - DMAC1_1_DEI0, DMAC1_1_DEI1, DMAC1_1_DEI2, DMAC1_1_DEI3, - DMAC1_2_DEI4, DMAC1_2_DEI5, DMAC1_2_DADERR, - DMAC2_1_DEI0, DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3, - DMAC2_2_DEI4, DMAC2_2_DEI5, DMAC2_2_DADERR, - DMAC3_1_DEI0, DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3, - DMAC3_2_DEI4, DMAC3_2_DEI5, DMAC3_2_DADERR, - SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM, - HDMI, - USBH_INT, USBH_OHCI, USBH_EHCI, USBH_PME, USBH_BIND, - RSPI_OVRF, RSPI_SPTEF, RSPI_SPRF, - SPU2_0, SPU2_1, - FSI, FMSI, - HDMI_SSS, HDMI_KEY, - IPMMU, - AP_ARM_CTIIRQ, AP_ARM_PMURQ, - MFIS2, - CPORTR2S, - CMT14, CMT15, - MMCIF_0, MMCIF_1, MMCIF_2, - SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEI, - STPRO_0, STPRO_1, STPRO_2, STPRO_3, STPRO_4, - - /* interrupt groups INTCA */ - DMAC1_1, DMAC1_2, - DMAC2_1, DMAC2_2, - DMAC3_1, DMAC3_2, - AP_ARM1, AP_ARM2, - SDHI0, SDHI1, SDHI2, - SHWYSTAT, - USBF, USBH1, USBH2, - RSPI, SPU2, FLCTL, IIC1, -}; - -static struct intc_vect intca_vectors[] __initdata = { - INTC_VECT(DIRC, 0x0560), - INTC_VECT(ATAPI, 0x05E0), - INTC_VECT(IIC1_ALI, 0x0780), - INTC_VECT(IIC1_TACKI, 0x07A0), - INTC_VECT(IIC1_WAITI, 0x07C0), - INTC_VECT(IIC1_DTEI, 0x07E0), - INTC_VECT(AP_ARM_COMMTX, 0x0840), - INTC_VECT(AP_ARM_COMMRX, 0x0860), - INTC_VECT(MFI, 0x0900), - INTC_VECT(MFIS, 0x0920), - INTC_VECT(BBIF1, 0x0940), - INTC_VECT(BBIF2, 0x0960), - INTC_VECT(USBHSDMAC, 0x0A00), - INTC_VECT(USBF_OUL_SOF, 0x0A20), - INTC_VECT(USBF_IXL_INT, 0x0A40), - INTC_VECT(SGX540, 0x0A60), - INTC_VECT(CMT1_0, 0x0B00), - INTC_VECT(CMT1_1, 0x0B20), - INTC_VECT(CMT1_2, 0x0B40), - INTC_VECT(CMT1_3, 0x0B60), - INTC_VECT(CMT2, 0x0B80), - INTC_VECT(CMT3, 0x0BA0), - INTC_VECT(KEYSC, 0x0BE0), - INTC_VECT(SCIFA0, 0x0C00), - INTC_VECT(SCIFA1, 0x0C20), - INTC_VECT(SCIFA2, 0x0C40), - INTC_VECT(SCIFA3, 0x0C60), - INTC_VECT(MSIOF2, 0x0C80), - INTC_VECT(MSIOF1, 0x0D00), - INTC_VECT(SCIFA4, 0x0D20), - INTC_VECT(SCIFA5, 0x0D40), - INTC_VECT(SCIFB, 0x0D60), - INTC_VECT(FLCTL_FLSTEI, 0x0D80), - INTC_VECT(FLCTL_FLTENDI, 0x0DA0), - INTC_VECT(FLCTL_FLTREQ0I, 0x0DC0), - INTC_VECT(FLCTL_FLTREQ1I, 0x0DE0), - INTC_VECT(SDHI0_0, 0x0E00), - INTC_VECT(SDHI0_1, 0x0E20), - INTC_VECT(SDHI0_2, 0x0E40), - INTC_VECT(SDHI0_3, 0x0E60), - INTC_VECT(SDHI1_0, 0x0E80), - INTC_VECT(SDHI1_1, 0x0EA0), - INTC_VECT(SDHI1_2, 0x0EC0), - INTC_VECT(SDHI1_3, 0x0EE0), - INTC_VECT(AP_ARM_L2CINT, 0x0FA0), - INTC_VECT(IRDA, 0x0480), - INTC_VECT(TPU0, 0x04A0), - INTC_VECT(SCIFA6, 0x04C0), - INTC_VECT(SCIFA7, 0x04E0), - INTC_VECT(GbEther, 0x0500), - INTC_VECT(ICBS0, 0x0540), - INTC_VECT(DDM, 0x1140), - INTC_VECT(SDHI2_0, 0x1200), - INTC_VECT(SDHI2_1, 0x1220), - INTC_VECT(SDHI2_2, 0x1240), - INTC_VECT(SDHI2_3, 0x1260), - INTC_VECT(RWDT0, 0x1280), - INTC_VECT(DMAC1_1_DEI0, 0x2000), - INTC_VECT(DMAC1_1_DEI1, 0x2020), - INTC_VECT(DMAC1_1_DEI2, 0x2040), - INTC_VECT(DMAC1_1_DEI3, 0x2060), - INTC_VECT(DMAC1_2_DEI4, 0x2080), - INTC_VECT(DMAC1_2_DEI5, 0x20A0), - INTC_VECT(DMAC1_2_DADERR, 0x20C0), - INTC_VECT(DMAC2_1_DEI0, 0x2100), - INTC_VECT(DMAC2_1_DEI1, 0x2120), - INTC_VECT(DMAC2_1_DEI2, 0x2140), - INTC_VECT(DMAC2_1_DEI3, 0x2160), - INTC_VECT(DMAC2_2_DEI4, 0x2180), - INTC_VECT(DMAC2_2_DEI5, 0x21A0), - INTC_VECT(DMAC2_2_DADERR, 0x21C0), - INTC_VECT(DMAC3_1_DEI0, 0x2200), - INTC_VECT(DMAC3_1_DEI1, 0x2220), - INTC_VECT(DMAC3_1_DEI2, 0x2240), - INTC_VECT(DMAC3_1_DEI3, 0x2260), - INTC_VECT(DMAC3_2_DEI4, 0x2280), - INTC_VECT(DMAC3_2_DEI5, 0x22A0), - INTC_VECT(DMAC3_2_DADERR, 0x22C0), - INTC_VECT(SHWYSTAT_RT, 0x1300), - INTC_VECT(SHWYSTAT_HS, 0x1320), - INTC_VECT(SHWYSTAT_COM, 0x1340), - INTC_VECT(USBH_INT, 0x1540), - INTC_VECT(USBH_OHCI, 0x1560), - INTC_VECT(USBH_EHCI, 0x1580), - INTC_VECT(USBH_PME, 0x15A0), - INTC_VECT(USBH_BIND, 0x15C0), - INTC_VECT(HDMI, 0x1700), - INTC_VECT(RSPI_OVRF, 0x1780), - INTC_VECT(RSPI_SPTEF, 0x17A0), - INTC_VECT(RSPI_SPRF, 0x17C0), - INTC_VECT(SPU2_0, 0x1800), - INTC_VECT(SPU2_1, 0x1820), - INTC_VECT(FSI, 0x1840), - INTC_VECT(FMSI, 0x1860), - INTC_VECT(HDMI_SSS, 0x18A0), - INTC_VECT(HDMI_KEY, 0x18C0), - INTC_VECT(IPMMU, 0x1920), - INTC_VECT(AP_ARM_CTIIRQ, 0x1980), - INTC_VECT(AP_ARM_PMURQ, 0x19A0), - INTC_VECT(MFIS2, 0x1A00), - INTC_VECT(CPORTR2S, 0x1A20), - INTC_VECT(CMT14, 0x1A40), - INTC_VECT(CMT15, 0x1A60), - INTC_VECT(MMCIF_0, 0x1AA0), - INTC_VECT(MMCIF_1, 0x1AC0), - INTC_VECT(MMCIF_2, 0x1AE0), - INTC_VECT(SIM_ERI, 0x1C00), - INTC_VECT(SIM_RXI, 0x1C20), - INTC_VECT(SIM_TXI, 0x1C40), - INTC_VECT(SIM_TEI, 0x1C60), - INTC_VECT(STPRO_0, 0x1C80), - INTC_VECT(STPRO_1, 0x1CA0), - INTC_VECT(STPRO_2, 0x1CC0), - INTC_VECT(STPRO_3, 0x1CE0), - INTC_VECT(STPRO_4, 0x1D00), -}; - -static struct intc_group intca_groups[] __initdata = { - INTC_GROUP(DMAC1_1, - DMAC1_1_DEI0, DMAC1_1_DEI1, DMAC1_1_DEI2, DMAC1_1_DEI3), - INTC_GROUP(DMAC1_2, - DMAC1_2_DEI4, DMAC1_2_DEI5, DMAC1_2_DADERR), - INTC_GROUP(DMAC2_1, - DMAC2_1_DEI0, DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3), - INTC_GROUP(DMAC2_2, - DMAC2_2_DEI4, DMAC2_2_DEI5, DMAC2_2_DADERR), - INTC_GROUP(DMAC3_1, - DMAC3_1_DEI0, DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3), - INTC_GROUP(DMAC3_2, - DMAC3_2_DEI4, DMAC3_2_DEI5, DMAC3_2_DADERR), - INTC_GROUP(AP_ARM1, - AP_ARM_COMMTX, AP_ARM_COMMRX), - INTC_GROUP(AP_ARM2, - AP_ARM_CTIIRQ, AP_ARM_PMURQ), - INTC_GROUP(USBF, - USBF_OUL_SOF, USBF_IXL_INT), - INTC_GROUP(SDHI0, - SDHI0_0, SDHI0_1, SDHI0_2, SDHI0_3), - INTC_GROUP(SDHI1, - SDHI1_0, SDHI1_1, SDHI1_2, SDHI1_3), - INTC_GROUP(SDHI2, - SDHI2_0, SDHI2_1, SDHI2_2, SDHI2_3), - INTC_GROUP(SHWYSTAT, - SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM), - INTC_GROUP(USBH1, /* FIXME */ - USBH_INT, USBH_OHCI), - INTC_GROUP(USBH2, /* FIXME */ - USBH_EHCI, - USBH_PME, USBH_BIND), - INTC_GROUP(RSPI, - RSPI_OVRF, RSPI_SPTEF, RSPI_SPRF), - INTC_GROUP(SPU2, - SPU2_0, SPU2_1), - INTC_GROUP(FLCTL, - FLCTL_FLSTEI, FLCTL_FLTENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I), - INTC_GROUP(IIC1, - IIC1_ALI, IIC1_TACKI, IIC1_WAITI, IIC1_DTEI), -}; - -static struct intc_mask_reg intca_mask_registers[] __initdata = { - { /* IMR0A / IMCR0A */ 0xe6940080, 0xe69400c0, 8, - { DMAC2_1_DEI3, DMAC2_1_DEI2, DMAC2_1_DEI1, DMAC2_1_DEI0, - 0, 0, AP_ARM_COMMTX, AP_ARM_COMMRX } }, - { /* IMR1A / IMCR1A */ 0xe6940084, 0xe69400c4, 8, - { ATAPI, 0, DIRC, 0, - DMAC1_1_DEI3, DMAC1_1_DEI2, DMAC1_1_DEI1, DMAC1_1_DEI0 } }, - { /* IMR2A / IMCR2A */ 0xe6940088, 0xe69400c8, 8, - { 0, 0, 0, 0, - BBIF1, BBIF2, MFIS, MFI } }, - { /* IMR3A / IMCR3A */ 0xe694008c, 0xe69400cc, 8, - { DMAC3_1_DEI3, DMAC3_1_DEI2, DMAC3_1_DEI1, DMAC3_1_DEI0, - DMAC3_2_DADERR, DMAC3_2_DEI5, DMAC3_2_DEI4, IRDA } }, - { /* IMR4A / IMCR4A */ 0xe6940090, 0xe69400d0, 8, - { DDM, 0, 0, 0, - 0, 0, 0, 0 } }, - { /* IMR5A / IMCR5A */ 0xe6940094, 0xe69400d4, 8, - { KEYSC, DMAC1_2_DADERR, DMAC1_2_DEI5, DMAC1_2_DEI4, - SCIFA3, SCIFA2, SCIFA1, SCIFA0 } }, - { /* IMR6A / IMCR6A */ 0xe6940098, 0xe69400d8, 8, - { SCIFB, SCIFA5, SCIFA4, MSIOF1, - 0, 0, MSIOF2, 0 } }, - { /* IMR7A / IMCR7A */ 0xe694009c, 0xe69400dc, 8, - { SDHI0_3, SDHI0_2, SDHI0_1, SDHI0_0, - FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLTENDI, FLCTL_FLSTEI } }, - { /* IMR8A / IMCR8A */ 0xe69400a0, 0xe69400e0, 8, - { SDHI1_3, SDHI1_2, SDHI1_1, SDHI1_0, - 0, USBHSDMAC, 0, AP_ARM_L2CINT } }, - { /* IMR9A / IMCR9A */ 0xe69400a4, 0xe69400e4, 8, - { CMT1_3, CMT1_2, CMT1_1, CMT1_0, - CMT2, USBF_IXL_INT, USBF_OUL_SOF, SGX540 } }, - { /* IMR10A / IMCR10A */ 0xe69400a8, 0xe69400e8, 8, - { 0, DMAC2_2_DADERR, DMAC2_2_DEI5, DMAC2_2_DEI4, - 0, 0, 0, 0 } }, - { /* IMR11A / IMCR11A */ 0xe69400ac, 0xe69400ec, 8, - { IIC1_DTEI, IIC1_WAITI, IIC1_TACKI, IIC1_ALI, - ICBS0, 0, 0, 0 } }, - { /* IMR12A / IMCR12A */ 0xe69400b0, 0xe69400f0, 8, - { 0, 0, TPU0, SCIFA6, - SCIFA7, GbEther, 0, 0 } }, - { /* IMR13A / IMCR13A */ 0xe69400b4, 0xe69400f4, 8, - { SDHI2_3, SDHI2_2, SDHI2_1, SDHI2_0, - 0, CMT3, 0, RWDT0 } }, - { /* IMR0A3 / IMCR0A3 */ 0xe6950080, 0xe69500c0, 8, - { SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM, 0, - 0, 0, 0, 0 } }, - /* IMR1A3 / IMCR1A3 */ - { /* IMR2A3 / IMCR2A3 */ 0xe6950088, 0xe69500c8, 8, - { 0, 0, USBH_INT, USBH_OHCI, - USBH_EHCI, USBH_PME, USBH_BIND, 0 } }, - /* IMR3A3 / IMCR3A3 */ - { /* IMR4A3 / IMCR4A3 */ 0xe6950090, 0xe69500d0, 8, - { HDMI, 0, 0, 0, - RSPI_OVRF, RSPI_SPTEF, RSPI_SPRF, 0 } }, - { /* IMR5A3 / IMCR5A3 */ 0xe6950094, 0xe69500d4, 8, - { SPU2_0, SPU2_1, FSI, FMSI, - 0, HDMI_SSS, HDMI_KEY, 0 } }, - { /* IMR6A3 / IMCR6A3 */ 0xe6950098, 0xe69500d8, 8, - { 0, IPMMU, 0, 0, - AP_ARM_CTIIRQ, AP_ARM_PMURQ, 0, 0 } }, - { /* IMR7A3 / IMCR7A3 */ 0xe695009c, 0xe69500dc, 8, - { MFIS2, CPORTR2S, CMT14, CMT15, - 0, MMCIF_0, MMCIF_1, MMCIF_2 } }, - /* IMR8A3 / IMCR8A3 */ - { /* IMR9A3 / IMCR9A3 */ 0xe69500a4, 0xe69500e4, 8, - { SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEI, - STPRO_0, STPRO_1, STPRO_2, STPRO_3 } }, - { /* IMR10A3 / IMCR10A3 */ 0xe69500a8, 0xe69500e8, 8, - { STPRO_4, 0, 0, 0, - 0, 0, 0, 0 } }, -}; - -static struct intc_prio_reg intca_prio_registers[] __initdata = { - { 0xe6940000, 0, 16, 4, /* IPRAA */ { DMAC3_1, DMAC3_2, CMT2, ICBS0 } }, - { 0xe6940004, 0, 16, 4, /* IPRBA */ { IRDA, 0, BBIF1, BBIF2 } }, - { 0xe6940008, 0, 16, 4, /* IPRCA */ { ATAPI, 0, CMT1_1, AP_ARM1 } }, - { 0xe694000c, 0, 16, 4, /* IPRDA */ { 0, 0, CMT1_2, 0 } }, - { 0xe6940010, 0, 16, 4, /* IPREA */ { DMAC1_1, MFIS, MFI, USBF } }, - { 0xe6940014, 0, 16, 4, /* IPRFA */ { KEYSC, DMAC1_2, - SGX540, CMT1_0 } }, - { 0xe6940018, 0, 16, 4, /* IPRGA */ { SCIFA0, SCIFA1, - SCIFA2, SCIFA3 } }, - { 0xe694001c, 0, 16, 4, /* IPRGH */ { MSIOF2, USBHSDMAC, - FLCTL, SDHI0 } }, - { 0xe6940020, 0, 16, 4, /* IPRIA */ { MSIOF1, SCIFA4, 0, IIC1 } }, - { 0xe6940024, 0, 16, 4, /* IPRJA */ { DMAC2_1, DMAC2_2, - AP_ARM_L2CINT, 0 } }, - { 0xe6940028, 0, 16, 4, /* IPRKA */ { 0, CMT1_3, 0, SDHI1 } }, - { 0xe694002c, 0, 16, 4, /* IPRLA */ { TPU0, SCIFA6, - SCIFA7, GbEther } }, - { 0xe6940030, 0, 16, 4, /* IPRMA */ { 0, CMT3, 0, RWDT0 } }, - { 0xe6940034, 0, 16, 4, /* IPRNA */ { SCIFB, SCIFA5, 0, DDM } }, - { 0xe6940038, 0, 16, 4, /* IPROA */ { 0, 0, DIRC, SDHI2 } }, - { 0xe6950000, 0, 16, 4, /* IPRAA3 */ { SHWYSTAT, 0, 0, 0 } }, - /* IPRBA3 */ - /* IPRCA3 */ - /* IPRDA3 */ - { 0xe6950010, 0, 16, 4, /* IPREA3 */ { USBH1, 0, 0, 0 } }, - { 0xe6950014, 0, 16, 4, /* IPRFA3 */ { USBH2, 0, 0, 0 } }, - /* IPRGA3 */ - /* IPRHA3 */ - { 0xe6950020, 0, 16, 4, /* IPRIA3 */ { HDMI, 0, 0, 0 } }, - { 0xe6950024, 0, 16, 4, /* IPRJA3 */ { RSPI, 0, 0, 0 } }, - { 0xe6950028, 0, 16, 4, /* IPRKA3 */ { SPU2, 0, FSI, FMSI } }, - { 0xe695002c, 0, 16, 4, /* IPRLA3 */ { 0, HDMI_SSS, HDMI_KEY, 0 } }, - { 0xe6950030, 0, 16, 4, /* IPRMA3 */ { IPMMU, 0, 0, 0 } }, - { 0xe6950034, 0, 16, 4, /* IPRNA3 */ { AP_ARM2, 0, 0, 0 } }, - { 0xe6950038, 0, 16, 4, /* IPROA3 */ { MFIS2, CPORTR2S, - CMT14, CMT15 } }, - { 0xe695003c, 0, 16, 4, /* IPRPA3 */ { 0, MMCIF_0, MMCIF_1, MMCIF_2 } }, - /* IPRQA3 */ - /* IPRRA3 */ - { 0xe6950048, 0, 16, 4, /* IPRSA3 */ { SIM_ERI, SIM_RXI, - SIM_TXI, SIM_TEI } }, - { 0xe695004c, 0, 16, 4, /* IPRTA3 */ { STPRO_0, STPRO_1, - STPRO_2, STPRO_3 } }, - { 0xe6950050, 0, 16, 4, /* IPRUA3 */ { STPRO_4, 0, 0, 0 } }, -}; - -static DECLARE_INTC_DESC(intca_desc, "r8a7740-intca", - intca_vectors, intca_groups, - intca_mask_registers, intca_prio_registers, - NULL); - -INTC_IRQ_PINS_32(intca_irq_pins, 0xe6900000, - INTC_VECT, "r8a7740-intca-irq-pins"); - - -/* - * INTCS - */ -enum { - UNUSED_INTCS = 0, - - INTCS, - - /* interrupt sources INTCS */ - - /* HUDI */ - /* STPRO */ - /* RTDMAC(1) */ - VPU5HA2, - _2DG_TRAP, _2DG_GPM_INT, _2DG_CER_INT, - /* MFI */ - /* BBIF2 */ - VPU5F, - _2DG_BRK_INT, - /* SGX540 */ - /* 2DDMAC */ - /* IPMMU */ - /* RTDMAC 2 */ - /* KEYSC */ - /* MSIOF */ - IIC0_ALI, IIC0_TACKI, IIC0_WAITI, IIC0_DTEI, - TMU0_0, TMU0_1, TMU0_2, - CMT0, - /* CMT2 */ - LMB, - CTI, - VOU, - /* RWDT0 */ - ICB, - VIO6C, - CEU20, CEU21, - JPU, - LCDC0, - LCRC, - /* RTDMAC2(1) */ - /* RTDMAC2(2) */ - LCDC1, - /* SPU2 */ - /* FSI */ - /* FMSI */ - TMU1_0, TMU1_1, TMU1_2, - CMT4, - DISP, - DSRV, - /* MFIS2 */ - CPORTS2R, - - /* interrupt groups INTCS */ - _2DG1, - IIC0, TMU1, -}; - -static struct intc_vect intcs_vectors[] = { - /* HUDI */ - /* STPRO */ - /* RTDMAC(1) */ - INTCS_VECT(VPU5HA2, 0x0880), - INTCS_VECT(_2DG_TRAP, 0x08A0), - INTCS_VECT(_2DG_GPM_INT, 0x08C0), - INTCS_VECT(_2DG_CER_INT, 0x08E0), - /* MFI */ - /* BBIF2 */ - INTCS_VECT(VPU5F, 0x0980), - INTCS_VECT(_2DG_BRK_INT, 0x09A0), - /* SGX540 */ - /* 2DDMAC */ - /* IPMMU */ - /* RTDMAC(2) */ - /* KEYSC */ - /* MSIOF */ - INTCS_VECT(IIC0_ALI, 0x0E00), - INTCS_VECT(IIC0_TACKI, 0x0E20), - INTCS_VECT(IIC0_WAITI, 0x0E40), - INTCS_VECT(IIC0_DTEI, 0x0E60), - INTCS_VECT(TMU0_0, 0x0E80), - INTCS_VECT(TMU0_1, 0x0EA0), - INTCS_VECT(TMU0_2, 0x0EC0), - INTCS_VECT(CMT0, 0x0F00), - /* CMT2 */ - INTCS_VECT(LMB, 0x0F60), - INTCS_VECT(CTI, 0x0400), - INTCS_VECT(VOU, 0x0420), - /* RWDT0 */ - INTCS_VECT(ICB, 0x0480), - INTCS_VECT(VIO6C, 0x04E0), - INTCS_VECT(CEU20, 0x0500), - INTCS_VECT(CEU21, 0x0520), - INTCS_VECT(JPU, 0x0560), - INTCS_VECT(LCDC0, 0x0580), - INTCS_VECT(LCRC, 0x05A0), - /* RTDMAC2(1) */ - /* RTDMAC2(2) */ - INTCS_VECT(LCDC1, 0x1780), - /* SPU2 */ - /* FSI */ - /* FMSI */ - INTCS_VECT(TMU1_0, 0x1900), - INTCS_VECT(TMU1_1, 0x1920), - INTCS_VECT(TMU1_2, 0x1940), - INTCS_VECT(CMT4, 0x1980), - INTCS_VECT(DISP, 0x19A0), - INTCS_VECT(DSRV, 0x19C0), - /* MFIS2 */ - INTCS_VECT(CPORTS2R, 0x1A20), - - INTC_VECT(INTCS, 0xf80), -}; - -static struct intc_group intcs_groups[] __initdata = { - INTC_GROUP(_2DG1, /*FIXME*/ - _2DG_CER_INT, _2DG_GPM_INT, _2DG_TRAP), - INTC_GROUP(IIC0, - IIC0_DTEI, IIC0_WAITI, IIC0_TACKI, IIC0_ALI), - INTC_GROUP(TMU1, - TMU1_0, TMU1_1, TMU1_2), -}; - -static struct intc_mask_reg intcs_mask_registers[] = { - /* IMR0SA / IMCR0SA */ /* all 0 */ - { /* IMR1SA / IMCR1SA */ 0xffd20184, 0xffd201c4, 8, - { _2DG_CER_INT, _2DG_GPM_INT, _2DG_TRAP, VPU5HA2, - 0, 0, 0, 0 /*STPRO*/ } }, - { /* IMR2SA / IMCR2SA */ 0xffd20188, 0xffd201c8, 8, - { 0/*STPRO*/, 0, CEU21, VPU5F, - 0/*BBIF2*/, 0, 0, 0/*MFI*/ } }, - { /* IMR3SA / IMCR3SA */ 0xffd2018c, 0xffd201cc, 8, - { 0, 0, 0, 0, /*2DDMAC*/ - VIO6C, 0, 0, ICB } }, - { /* IMR4SA / IMCR4SA */ 0xffd20190, 0xffd201d0, 8, - { 0, 0, VOU, CTI, - JPU, 0, LCRC, LCDC0 } }, - /* IMR5SA / IMCR5SA */ /*KEYSC/RTDMAC2/RTDMAC1*/ - /* IMR6SA / IMCR6SA */ /*MSIOF/SGX540*/ - { /* IMR7SA / IMCR7SA */ 0xffd2019c, 0xffd201dc, 8, - { 0, TMU0_2, TMU0_1, TMU0_0, - 0, 0, 0, 0 } }, - { /* IMR8SA / IMCR8SA */ 0xffd201a0, 0xffd201e0, 8, - { 0, 0, 0, 0, - CEU20, 0, 0, 0 } }, - { /* IMR9SA / IMCR9SA */ 0xffd201a4, 0xffd201e4, 8, - { 0, 0/*RWDT0*/, 0/*CMT2*/, CMT0, - 0, 0, 0, 0 } }, - /* IMR10SA / IMCR10SA */ /*IPMMU*/ - { /* IMR11SA / IMCR11SA */ 0xffd201ac, 0xffd201ec, 8, - { IIC0_DTEI, IIC0_WAITI, IIC0_TACKI, IIC0_ALI, - 0, _2DG_BRK_INT, LMB, 0 } }, - /* IMR12SA / IMCR12SA */ - /* IMR13SA / IMCR13SA */ - /* IMR0SA3 / IMCR0SA3 */ /*RTDMAC2(1)/RTDMAC2(2)*/ - /* IMR1SA3 / IMCR1SA3 */ - /* IMR2SA3 / IMCR2SA3 */ - /* IMR3SA3 / IMCR3SA3 */ - { /* IMR4SA3 / IMCR4SA3 */ 0xffd50190, 0xffd501d0, 8, - { 0, 0, 0, 0, - LCDC1, 0, 0, 0 } }, - /* IMR5SA3 / IMCR5SA3 */ /* SPU2/FSI/FMSI */ - { /* IMR6SA3 / IMCR6SA3 */ 0xffd50198, 0xffd501d8, 8, - { TMU1_0, TMU1_1, TMU1_2, 0, - CMT4, DISP, DSRV, 0 } }, - { /* IMR7SA3 / IMCR7SA3 */ 0xffd5019c, 0xffd501dc, 8, - { 0/*MFIS2*/, CPORTS2R, 0, 0, - 0, 0, 0, 0 } }, - { /* INTAMASK */ 0xffd20104, 0, 16, - { 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, INTCS } }, -}; - -/* Priority is needed for INTCA to receive the INTCS interrupt */ -static struct intc_prio_reg intcs_prio_registers[] = { - { 0xffd20000, 0, 16, 4, /* IPRAS */ { CTI, VOU, 0/*2DDMAC*/, ICB } }, - { 0xffd20004, 0, 16, 4, /* IPRBS */ { JPU, LCDC0, 0, LCRC } }, - /* IPRCS */ /*BBIF2*/ - /* IPRDS */ - { 0xffd20010, 0, 16, 4, /* IPRES */ { 0/*RTDMAC(1)*/, VPU5HA2, - 0/*MFI*/, VPU5F } }, - { 0xffd20014, 0, 16, 4, /* IPRFS */ { 0/*KEYSC*/, 0/*RTDMAC(2)*/, - 0/*CMT2*/, CMT0 } }, - { 0xffd20018, 0, 16, 4, /* IPRGS */ { TMU0_0, TMU0_1, - TMU0_2, _2DG1 } }, - { 0xffd2001c, 0, 16, 4, /* IPRHS */ { 0, 0/*STPRO*/, 0/*STPRO*/, - _2DG_BRK_INT/*FIXME*/ } }, - { 0xffd20020, 0, 16, 4, /* IPRIS */ { 0, 0/*MSIOF*/, 0, IIC0 } }, - { 0xffd20024, 0, 16, 4, /* IPRJS */ { CEU20, 0/*SGX540*/, 0, 0 } }, - { 0xffd20028, 0, 16, 4, /* IPRKS */ { VIO6C, 0, LMB, 0 } }, - { 0xffd2002c, 0, 16, 4, /* IPRLS */ { 0/*IPMMU*/, 0, CEU21, 0 } }, - /* IPRMS */ /*RWDT0*/ - /* IPRAS3 */ /*RTDMAC2(1)*/ - /* IPRBS3 */ /*RTDMAC2(2)*/ - /* IPRCS3 */ - /* IPRDS3 */ - /* IPRES3 */ - /* IPRFS3 */ - /* IPRGS3 */ - /* IPRHS3 */ - /* IPRIS3 */ - { 0xffd50024, 0, 16, 4, /* IPRJS3 */ { LCDC1, 0, 0, 0 } }, - /* IPRKS3 */ /*SPU2/FSI/FMSi*/ - /* IPRLS3 */ - { 0xffd50030, 0, 16, 4, /* IPRMS3 */ { TMU1, 0, 0, 0 } }, - { 0xffd50034, 0, 16, 4, /* IPRNS3 */ { CMT4, DISP, DSRV, 0 } }, - { 0xffd50038, 0, 16, 4, /* IPROS3 */ { 0/*MFIS2*/, CPORTS2R, 0, 0 } }, - /* IPRPS3 */ -}; - -static struct resource intcs_resources[] __initdata = { - [0] = { - .start = 0xffd20000, - .end = 0xffd201ff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 0xffd50000, - .end = 0xffd501ff, - .flags = IORESOURCE_MEM, - } -}; - -static struct intc_desc intcs_desc __initdata = { - .name = "r8a7740-intcs", - .resource = intcs_resources, - .num_resources = ARRAY_SIZE(intcs_resources), - .hw = INTC_HW_DESC(intcs_vectors, intcs_groups, intcs_mask_registers, - intcs_prio_registers, NULL, NULL), -}; - -static void intcs_demux(unsigned int irq, struct irq_desc *desc) -{ - void __iomem *reg = (void *)irq_get_handler_data(irq); - unsigned int evtcodeas = ioread32(reg); - - generic_handle_irq(intcs_evt2irq(evtcodeas)); -} +#include <linux/irqchip/arm-gic.h> void __init r8a7740_init_irq(void) { - void __iomem *intevtsa = ioremap_nocache(0xffd20100, PAGE_SIZE); - - register_intc_controller(&intca_desc); - register_intc_controller(&intca_irq_pins_desc); - register_intc_controller(&intcs_desc); - - /* demux using INTEVTSA */ - irq_set_handler_data(evt2irq(0xf80), (void *)intevtsa); - irq_set_chained_handler(evt2irq(0xf80), intcs_demux); + void __iomem *gic_dist_base = ioremap_nocache(0xc2800000, 0x1000); + void __iomem *gic_cpu_base = ioremap_nocache(0xc2000000, 0x1000); + void __iomem *intc_prio_base = ioremap_nocache(0xe6900010, 0x10); + void __iomem *intc_msk_base = ioremap_nocache(0xe6900040, 0x10); + void __iomem *pfc_inta_ctrl = ioremap_nocache(0xe605807c, 0x4); + + /* initialize the Generic Interrupt Controller PL390 r0p0 */ + gic_init(0, 29, gic_dist_base, gic_cpu_base); + + /* route signals to GIC */ + iowrite32(0x0, pfc_inta_ctrl); + + /* + * To mask the shared interrupt to SPI 149 we must ensure to set + * PRIO *and* MASK. Else we run into IRQ floods when registering + * the intc_irqpin devices + */ + iowrite32(0x0, intc_prio_base + 0x0); + iowrite32(0x0, intc_prio_base + 0x4); + iowrite32(0x0, intc_prio_base + 0x8); + iowrite32(0x0, intc_prio_base + 0xc); + iowrite8(0xff, intc_msk_base + 0x0); + iowrite8(0xff, intc_msk_base + 0x4); + iowrite8(0xff, intc_msk_base + 0x8); + iowrite8(0xff, intc_msk_base + 0xc); + + iounmap(intc_prio_base); + iounmap(intc_msk_base); + iounmap(pfc_inta_ctrl); } diff --git a/arch/arm/mach-shmobile/intc-r8a7779.c b/arch/arm/mach-shmobile/intc-r8a7779.c index 8807c27f71f9..b86dc8908724 100644 --- a/arch/arm/mach-shmobile/intc-r8a7779.c +++ b/arch/arm/mach-shmobile/intc-r8a7779.c @@ -19,12 +19,16 @@ */ #include <linux/kernel.h> #include <linux/init.h> +#include <linux/platform_device.h> #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/io.h> #include <linux/irqchip/arm-gic.h> +#include <linux/platform_data/irq-renesas-intc-irqpin.h> +#include <linux/irqchip.h> #include <mach/common.h> #include <mach/intc.h> +#include <mach/irqs.h> #include <mach/r8a7779.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -38,18 +42,61 @@ #define INT2NTSR0 IOMEM(0xfe700060) #define INT2NTSR1 IOMEM(0xfe700064) +static struct renesas_intc_irqpin_config irqpin0_platform_data = { + .irq_base = irq_pin(0), /* IRQ0 -> IRQ3 */ + .sense_bitfield_width = 2, +}; + +static struct resource irqpin0_resources[] = { + DEFINE_RES_MEM(0xfe78001c, 4), /* ICR1 */ + DEFINE_RES_MEM(0xfe780010, 4), /* INTPRI */ + DEFINE_RES_MEM(0xfe780024, 4), /* INTREQ */ + DEFINE_RES_MEM(0xfe780044, 4), /* INTMSK0 */ + DEFINE_RES_MEM(0xfe780064, 4), /* INTMSKCLR0 */ + DEFINE_RES_IRQ(gic_spi(27)), /* IRQ0 */ + DEFINE_RES_IRQ(gic_spi(28)), /* IRQ1 */ + DEFINE_RES_IRQ(gic_spi(29)), /* IRQ2 */ + DEFINE_RES_IRQ(gic_spi(30)), /* IRQ3 */ +}; + +static struct platform_device irqpin0_device = { + .name = "renesas_intc_irqpin", + .id = 0, + .resource = irqpin0_resources, + .num_resources = ARRAY_SIZE(irqpin0_resources), + .dev = { + .platform_data = &irqpin0_platform_data, + }, +}; + +void __init r8a7779_init_irq_extpin(int irlm) +{ + void __iomem *icr0 = ioremap_nocache(0xfe780000, PAGE_SIZE); + unsigned long tmp; + + if (icr0) { + tmp = ioread32(icr0); + if (irlm) + tmp |= 1 << 23; /* IRQ0 -> IRQ3 as individual pins */ + else + tmp &= ~(1 << 23); /* IRL mode - not supported */ + tmp |= (1 << 21); /* LVLMODE = 1 */ + iowrite32(tmp, icr0); + iounmap(icr0); + + if (irlm) + platform_device_register(&irqpin0_device); + } else + pr_warn("r8a7779: unable to setup external irq pin mode\n"); +} + static int r8a7779_set_wake(struct irq_data *data, unsigned int on) { return 0; /* always allow wakeup */ } -void __init r8a7779_init_irq(void) +static void __init r8a7779_init_irq_common(void) { - void __iomem *gic_dist_base = IOMEM(0xf0001000); - void __iomem *gic_cpu_base = IOMEM(0xf0000100); - - /* use GIC to handle interrupts */ - gic_init(0, 29, gic_dist_base, gic_cpu_base); gic_arch_extn.irq_set_wake = r8a7779_set_wake; /* route all interrupts to ARM */ @@ -63,3 +110,22 @@ void __init r8a7779_init_irq(void) __raw_writel(0xbffffffc, INT2SMSKCR3); __raw_writel(0x003fee3f, INT2SMSKCR4); } + +void __init r8a7779_init_irq(void) +{ + void __iomem *gic_dist_base = IOMEM(0xf0001000); + void __iomem *gic_cpu_base = IOMEM(0xf0000100); + + /* use GIC to handle interrupts */ + gic_init(0, 29, gic_dist_base, gic_cpu_base); + + r8a7779_init_irq_common(); +} + +#ifdef CONFIG_OF +void __init r8a7779_init_irq_dt(void) +{ + irqchip_init(); + r8a7779_init_irq_common(); +} +#endif diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c index 91faba666d46..19a26f4579b3 100644 --- a/arch/arm/mach-shmobile/intc-sh73a0.c +++ b/arch/arm/mach-shmobile/intc-sh73a0.c @@ -260,108 +260,6 @@ static int sh73a0_set_wake(struct irq_data *data, unsigned int on) return 0; /* always allow wakeup */ } -#define RELOC_BASE 0x1200 - -/* INTCA IRQ pins at INTCS + RELOC_BASE to make space for GIC+INTC handling */ -#define INTCS_VECT_RELOC(n, vect) INTCS_VECT((n), (vect) + RELOC_BASE) - -INTC_IRQ_PINS_32(intca_irq_pins, 0xe6900000, - INTCS_VECT_RELOC, "sh73a0-intca-irq-pins"); - -static int to_gic_irq(struct irq_data *data) -{ - unsigned int vect = irq2evt(data->irq) - INTCS_VECT_BASE; - - if (vect >= 0x3200) - vect -= 0x3000; - else - vect -= 0x0200; - - return gic_spi((vect >> 5) + 1); -} - -static int to_intca_reloc_irq(struct irq_data *data) -{ - return data->irq + (RELOC_BASE >> 5); -} - -#define irq_cb(cb, irq) irq_get_chip(irq)->cb(irq_get_irq_data(irq)) -#define irq_cbp(cb, irq, p...) irq_get_chip(irq)->cb(irq_get_irq_data(irq), p) - -static void intca_gic_enable(struct irq_data *data) -{ - irq_cb(irq_unmask, to_intca_reloc_irq(data)); - irq_cb(irq_unmask, to_gic_irq(data)); -} - -static void intca_gic_disable(struct irq_data *data) -{ - irq_cb(irq_mask, to_gic_irq(data)); - irq_cb(irq_mask, to_intca_reloc_irq(data)); -} - -static void intca_gic_mask_ack(struct irq_data *data) -{ - irq_cb(irq_mask, to_gic_irq(data)); - irq_cb(irq_mask_ack, to_intca_reloc_irq(data)); -} - -static void intca_gic_eoi(struct irq_data *data) -{ - irq_cb(irq_eoi, to_gic_irq(data)); -} - -static int intca_gic_set_type(struct irq_data *data, unsigned int type) -{ - return irq_cbp(irq_set_type, to_intca_reloc_irq(data), type); -} - -#ifdef CONFIG_SMP -static int intca_gic_set_affinity(struct irq_data *data, - const struct cpumask *cpumask, - bool force) -{ - return irq_cbp(irq_set_affinity, to_gic_irq(data), cpumask, force); -} -#endif - -struct irq_chip intca_gic_irq_chip = { - .name = "INTCA-GIC", - .irq_mask = intca_gic_disable, - .irq_unmask = intca_gic_enable, - .irq_mask_ack = intca_gic_mask_ack, - .irq_eoi = intca_gic_eoi, - .irq_enable = intca_gic_enable, - .irq_disable = intca_gic_disable, - .irq_shutdown = intca_gic_disable, - .irq_set_type = intca_gic_set_type, - .irq_set_wake = sh73a0_set_wake, -#ifdef CONFIG_SMP - .irq_set_affinity = intca_gic_set_affinity, -#endif -}; - -static int to_intc_vect(int irq) -{ - unsigned int irq_pin = irq - gic_spi(1); - unsigned int offs; - - if (irq_pin < 16) - offs = 0x0200; - else - offs = 0x3000; - - return offs + (irq_pin << 5); -} - -static irqreturn_t sh73a0_irq_pin_demux(int irq, void *dev_id) -{ - generic_handle_irq(intcs_evt2irq(to_intc_vect(irq))); - return IRQ_HANDLED; -} - -static struct irqaction sh73a0_irq_pin_cascade[32]; - #define PINTER0_PHYS 0xe69000a0 #define PINTER1_PHYS 0xe69000a4 #define PINTER0_VIRT IOMEM(0xe69000a0) @@ -422,13 +320,11 @@ void __init sh73a0_init_irq(void) void __iomem *gic_dist_base = IOMEM(0xf0001000); void __iomem *gic_cpu_base = IOMEM(0xf0000100); void __iomem *intevtsa = ioremap_nocache(0xffd20100, PAGE_SIZE); - int k, n; gic_init(0, 29, gic_dist_base, gic_cpu_base); gic_arch_extn.irq_set_wake = sh73a0_set_wake; register_intc_controller(&intcs_desc); - register_intc_controller(&intca_irq_pins_desc); register_intc_controller(&intc_pint0_desc); register_intc_controller(&intc_pint1_desc); @@ -438,19 +334,6 @@ void __init sh73a0_init_irq(void) sh73a0_intcs_cascade.dev_id = intevtsa; setup_irq(gic_spi(50), &sh73a0_intcs_cascade); - /* IRQ pins require special handling through INTCA and GIC */ - for (k = 0; k < 32; k++) { - sh73a0_irq_pin_cascade[k].name = "INTCA-GIC cascade"; - sh73a0_irq_pin_cascade[k].handler = sh73a0_irq_pin_demux; - setup_irq(gic_spi(1 + k), &sh73a0_irq_pin_cascade[k]); - - n = intcs_evt2irq(to_intc_vect(gic_spi(1 + k))); - WARN_ON(irq_alloc_desc_at(n, numa_node_id()) != n); - irq_set_chip_and_handler_name(n, &intca_gic_irq_chip, - handle_level_irq, "level"); - set_irq_flags(n, IRQF_VALID); /* yuck */ - } - /* PINT pins are sanely tied to the GIC as SPI */ sh73a0_pint0_cascade.name = "PINT0 cascade"; sh73a0_pint0_cascade.handler = sh73a0_pint0_demux; @@ -460,11 +343,3 @@ void __init sh73a0_init_irq(void) sh73a0_pint1_cascade.handler = sh73a0_pint1_demux; setup_irq(gic_spi(34), &sh73a0_pint1_cascade); } - -#ifdef CONFIG_OF -void __init sh73a0_init_irq_dt(void) -{ - irqchip_init(); - gic_arch_extn.irq_set_wake = sh73a0_set_wake; -} -#endif diff --git a/arch/arm/mach-shmobile/pm-sh7372.c b/arch/arm/mach-shmobile/pm-sh7372.c index a0826a48dd08..dec9293bb90d 100644 --- a/arch/arm/mach-shmobile/pm-sh7372.c +++ b/arch/arm/mach-shmobile/pm-sh7372.c @@ -410,11 +410,9 @@ static int sh7372_enter_a4s(struct cpuidle_device *dev, static struct cpuidle_driver sh7372_cpuidle_driver = { .name = "sh7372_cpuidle", .owner = THIS_MODULE, - .en_core_tk_irqen = 1, .state_count = 5, .safe_state_index = 0, /* C1 */ .states[0] = ARM_CPUIDLE_WFI_STATE, - .states[0].enter = shmobile_enter_wfi, .states[1] = { .name = "C2", .desc = "Core Standby Mode", @@ -450,12 +448,12 @@ static struct cpuidle_driver sh7372_cpuidle_driver = { }, }; -static void sh7372_cpuidle_init(void) +static void __init sh7372_cpuidle_init(void) { shmobile_cpuidle_set_driver(&sh7372_cpuidle_driver); } #else -static void sh7372_cpuidle_init(void) {} +static void __init sh7372_cpuidle_init(void) {} #endif #ifdef CONFIG_SUSPEND diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c index 47662a581c0a..899a86c31ec9 100644 --- a/arch/arm/mach-shmobile/setup-emev2.c +++ b/arch/arm/mach-shmobile/setup-emev2.c @@ -404,7 +404,7 @@ void __init emev2_add_standard_devices(void) ARRAY_SIZE(emev2_late_devices)); } -void __init emev2_init_delay(void) +static void __init emev2_init_delay(void) { shmobile_setup_delay(533, 1, 3); /* Cortex-A9 @ 533MHz */ } @@ -439,7 +439,7 @@ static const struct of_dev_auxdata emev2_auxdata_lookup[] __initconst = { { } }; -void __init emev2_add_standard_devices_dt(void) +static void __init emev2_add_standard_devices_dt(void) { of_platform_populate(NULL, of_default_bus_match_table, emev2_auxdata_lookup, NULL); @@ -456,7 +456,6 @@ DT_MACHINE_START(EMEV2_DT, "Generic Emma Mobile EV2 (Flattened Device Tree)") .nr_irqs = NR_IRQS_LEGACY, .init_irq = irqchip_init, .init_machine = emev2_add_standard_devices_dt, - .init_time = shmobile_timer_init, .dt_compat = emev2_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/setup-r8a73a4.c b/arch/arm/mach-shmobile/setup-r8a73a4.c new file mode 100644 index 000000000000..c5a75a7a508f --- /dev/null +++ b/arch/arm/mach-shmobile/setup-r8a73a4.c @@ -0,0 +1,202 @@ +/* + * r8a73a4 processor support + * + * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include <linux/irq.h> +#include <linux/irqchip.h> +#include <linux/kernel.h> +#include <linux/of_platform.h> +#include <linux/platform_data/irq-renesas-irqc.h> +#include <linux/serial_sci.h> +#include <mach/common.h> +#include <mach/irqs.h> +#include <mach/r8a73a4.h> +#include <asm/mach/arch.h> + +static const struct resource pfc_resources[] = { + DEFINE_RES_MEM(0xe6050000, 0x9000), +}; + +void __init r8a73a4_pinmux_init(void) +{ + platform_device_register_simple("pfc-r8a73a4", -1, pfc_resources, + ARRAY_SIZE(pfc_resources)); +} + +#define SCIF_COMMON(scif_type, baseaddr, irq) \ + .type = scif_type, \ + .mapbase = baseaddr, \ + .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, \ + .scbrr_algo_id = SCBRR_ALGO_4, \ + .irqs = SCIx_IRQ_MUXED(irq) + +#define SCIFA_DATA(index, baseaddr, irq) \ +[index] = { \ + SCIF_COMMON(PORT_SCIFA, baseaddr, irq), \ + .scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE0, \ +} + +#define SCIFB_DATA(index, baseaddr, irq) \ +[index] = { \ + SCIF_COMMON(PORT_SCIFB, baseaddr, irq), \ + .scscr = SCSCR_RE | SCSCR_TE, \ +} + +enum { SCIFA0, SCIFA1, SCIFB0, SCIFB1, SCIFB2, SCIFB3 }; + +static const struct plat_sci_port scif[] = { + SCIFA_DATA(SCIFA0, 0xe6c40000, gic_spi(144)), /* SCIFA0 */ + SCIFA_DATA(SCIFA1, 0xe6c50000, gic_spi(145)), /* SCIFA1 */ + SCIFB_DATA(SCIFB0, 0xe6c50000, gic_spi(145)), /* SCIFB0 */ + SCIFB_DATA(SCIFB1, 0xe6c30000, gic_spi(149)), /* SCIFB1 */ + SCIFB_DATA(SCIFB2, 0xe6ce0000, gic_spi(150)), /* SCIFB2 */ + SCIFB_DATA(SCIFB3, 0xe6cf0000, gic_spi(151)), /* SCIFB3 */ +}; + +static inline void r8a73a4_register_scif(int idx) +{ + platform_device_register_data(&platform_bus, "sh-sci", idx, &scif[idx], + sizeof(struct plat_sci_port)); +} + +static const struct renesas_irqc_config irqc0_data = { + .irq_base = irq_pin(0), /* IRQ0 -> IRQ31 */ +}; + +static const struct resource irqc0_resources[] = { + DEFINE_RES_MEM(0xe61c0000, 0x200), /* IRQC Event Detector Block_0 */ + DEFINE_RES_IRQ(gic_spi(0)), /* IRQ0 */ + DEFINE_RES_IRQ(gic_spi(1)), /* IRQ1 */ + DEFINE_RES_IRQ(gic_spi(2)), /* IRQ2 */ + DEFINE_RES_IRQ(gic_spi(3)), /* IRQ3 */ + DEFINE_RES_IRQ(gic_spi(4)), /* IRQ4 */ + DEFINE_RES_IRQ(gic_spi(5)), /* IRQ5 */ + DEFINE_RES_IRQ(gic_spi(6)), /* IRQ6 */ + DEFINE_RES_IRQ(gic_spi(7)), /* IRQ7 */ + DEFINE_RES_IRQ(gic_spi(8)), /* IRQ8 */ + DEFINE_RES_IRQ(gic_spi(9)), /* IRQ9 */ + DEFINE_RES_IRQ(gic_spi(10)), /* IRQ10 */ + DEFINE_RES_IRQ(gic_spi(11)), /* IRQ11 */ + DEFINE_RES_IRQ(gic_spi(12)), /* IRQ12 */ + DEFINE_RES_IRQ(gic_spi(13)), /* IRQ13 */ + DEFINE_RES_IRQ(gic_spi(14)), /* IRQ14 */ + DEFINE_RES_IRQ(gic_spi(15)), /* IRQ15 */ + DEFINE_RES_IRQ(gic_spi(16)), /* IRQ16 */ + DEFINE_RES_IRQ(gic_spi(17)), /* IRQ17 */ + DEFINE_RES_IRQ(gic_spi(18)), /* IRQ18 */ + DEFINE_RES_IRQ(gic_spi(19)), /* IRQ19 */ + DEFINE_RES_IRQ(gic_spi(20)), /* IRQ20 */ + DEFINE_RES_IRQ(gic_spi(21)), /* IRQ21 */ + DEFINE_RES_IRQ(gic_spi(22)), /* IRQ22 */ + DEFINE_RES_IRQ(gic_spi(23)), /* IRQ23 */ + DEFINE_RES_IRQ(gic_spi(24)), /* IRQ24 */ + DEFINE_RES_IRQ(gic_spi(25)), /* IRQ25 */ + DEFINE_RES_IRQ(gic_spi(26)), /* IRQ26 */ + DEFINE_RES_IRQ(gic_spi(27)), /* IRQ27 */ + DEFINE_RES_IRQ(gic_spi(28)), /* IRQ28 */ + DEFINE_RES_IRQ(gic_spi(29)), /* IRQ29 */ + DEFINE_RES_IRQ(gic_spi(30)), /* IRQ30 */ + DEFINE_RES_IRQ(gic_spi(31)), /* IRQ31 */ +}; + +static const struct renesas_irqc_config irqc1_data = { + .irq_base = irq_pin(32), /* IRQ32 -> IRQ57 */ +}; + +static const struct resource irqc1_resources[] = { + DEFINE_RES_MEM(0xe61c0200, 0x200), /* IRQC Event Detector Block_1 */ + DEFINE_RES_IRQ(gic_spi(32)), /* IRQ32 */ + DEFINE_RES_IRQ(gic_spi(33)), /* IRQ33 */ + DEFINE_RES_IRQ(gic_spi(34)), /* IRQ34 */ + DEFINE_RES_IRQ(gic_spi(35)), /* IRQ35 */ + DEFINE_RES_IRQ(gic_spi(36)), /* IRQ36 */ + DEFINE_RES_IRQ(gic_spi(37)), /* IRQ37 */ + DEFINE_RES_IRQ(gic_spi(38)), /* IRQ38 */ + DEFINE_RES_IRQ(gic_spi(39)), /* IRQ39 */ + DEFINE_RES_IRQ(gic_spi(40)), /* IRQ40 */ + DEFINE_RES_IRQ(gic_spi(41)), /* IRQ41 */ + DEFINE_RES_IRQ(gic_spi(42)), /* IRQ42 */ + DEFINE_RES_IRQ(gic_spi(43)), /* IRQ43 */ + DEFINE_RES_IRQ(gic_spi(44)), /* IRQ44 */ + DEFINE_RES_IRQ(gic_spi(45)), /* IRQ45 */ + DEFINE_RES_IRQ(gic_spi(46)), /* IRQ46 */ + DEFINE_RES_IRQ(gic_spi(47)), /* IRQ47 */ + DEFINE_RES_IRQ(gic_spi(48)), /* IRQ48 */ + DEFINE_RES_IRQ(gic_spi(49)), /* IRQ49 */ + DEFINE_RES_IRQ(gic_spi(50)), /* IRQ50 */ + DEFINE_RES_IRQ(gic_spi(51)), /* IRQ51 */ + DEFINE_RES_IRQ(gic_spi(52)), /* IRQ52 */ + DEFINE_RES_IRQ(gic_spi(53)), /* IRQ53 */ + DEFINE_RES_IRQ(gic_spi(54)), /* IRQ54 */ + DEFINE_RES_IRQ(gic_spi(55)), /* IRQ55 */ + DEFINE_RES_IRQ(gic_spi(56)), /* IRQ56 */ + DEFINE_RES_IRQ(gic_spi(57)), /* IRQ57 */ +}; + +#define r8a73a4_register_irqc(idx) \ + platform_device_register_resndata(&platform_bus, "renesas_irqc", \ + idx, irqc##idx##_resources, \ + ARRAY_SIZE(irqc##idx##_resources), \ + &irqc##idx##_data, \ + sizeof(struct renesas_irqc_config)) + +/* Thermal0 -> Thermal2 */ +static const struct resource thermal0_resources[] = { + DEFINE_RES_MEM(0xe61f0000, 0x14), + DEFINE_RES_MEM(0xe61f0100, 0x38), + DEFINE_RES_MEM(0xe61f0200, 0x38), + DEFINE_RES_MEM(0xe61f0300, 0x38), + DEFINE_RES_IRQ(gic_spi(69)), +}; + +#define r8a73a4_register_thermal() \ + platform_device_register_simple("rcar_thermal", -1, \ + thermal0_resources, \ + ARRAY_SIZE(thermal0_resources)) + +void __init r8a73a4_add_standard_devices(void) +{ + r8a73a4_register_scif(SCIFA0); + r8a73a4_register_scif(SCIFA1); + r8a73a4_register_scif(SCIFB0); + r8a73a4_register_scif(SCIFB1); + r8a73a4_register_scif(SCIFB2); + r8a73a4_register_scif(SCIFB3); + r8a73a4_register_irqc(0); + r8a73a4_register_irqc(1); + r8a73a4_register_thermal(); +} + +#ifdef CONFIG_USE_OF +void __init r8a73a4_add_standard_devices_dt(void) +{ + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); +} + +static const char *r8a73a4_boards_compat_dt[] __initdata = { + "renesas,r8a73a4", + NULL, +}; + +DT_MACHINE_START(R8A73A4_DT, "Generic R8A73A4 (Flattened Device Tree)") + .init_irq = irqchip_init, + .init_machine = r8a73a4_add_standard_devices_dt, + .init_time = shmobile_timer_init, + .dt_compat = r8a73a4_boards_compat_dt, +MACHINE_END +#endif /* CONFIG_USE_OF */ diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c index 8b85d4d8fab6..326a4ab0bd5f 100644 --- a/arch/arm/mach-shmobile/setup-r8a7740.c +++ b/arch/arm/mach-shmobile/setup-r8a7740.c @@ -22,6 +22,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/io.h> +#include <linux/platform_data/irq-renesas-intc-irqpin.h> #include <linux/platform_device.h> #include <linux/of_platform.h> #include <linux/serial_sci.h> @@ -94,6 +95,126 @@ void __init r8a7740_pinmux_init(void) platform_device_register(&r8a7740_pfc_device); } +static struct renesas_intc_irqpin_config irqpin0_platform_data = { + .irq_base = irq_pin(0), /* IRQ0 -> IRQ7 */ +}; + +static struct resource irqpin0_resources[] = { + DEFINE_RES_MEM(0xe6900000, 4), /* ICR1A */ + DEFINE_RES_MEM(0xe6900010, 4), /* INTPRI00A */ + DEFINE_RES_MEM(0xe6900020, 1), /* INTREQ00A */ + DEFINE_RES_MEM(0xe6900040, 1), /* INTMSK00A */ + DEFINE_RES_MEM(0xe6900060, 1), /* INTMSKCLR00A */ + DEFINE_RES_IRQ(gic_spi(149)), /* IRQ0 */ + DEFINE_RES_IRQ(gic_spi(149)), /* IRQ1 */ + DEFINE_RES_IRQ(gic_spi(149)), /* IRQ2 */ + DEFINE_RES_IRQ(gic_spi(149)), /* IRQ3 */ + DEFINE_RES_IRQ(gic_spi(149)), /* IRQ4 */ + DEFINE_RES_IRQ(gic_spi(149)), /* IRQ5 */ + DEFINE_RES_IRQ(gic_spi(149)), /* IRQ6 */ + DEFINE_RES_IRQ(gic_spi(149)), /* IRQ7 */ +}; + +static struct platform_device irqpin0_device = { + .name = "renesas_intc_irqpin", + .id = 0, + .resource = irqpin0_resources, + .num_resources = ARRAY_SIZE(irqpin0_resources), + .dev = { + .platform_data = &irqpin0_platform_data, + }, +}; + +static struct renesas_intc_irqpin_config irqpin1_platform_data = { + .irq_base = irq_pin(8), /* IRQ8 -> IRQ15 */ +}; + +static struct resource irqpin1_resources[] = { + DEFINE_RES_MEM(0xe6900004, 4), /* ICR2A */ + DEFINE_RES_MEM(0xe6900014, 4), /* INTPRI10A */ + DEFINE_RES_MEM(0xe6900024, 1), /* INTREQ10A */ + DEFINE_RES_MEM(0xe6900044, 1), /* INTMSK10A */ + DEFINE_RES_MEM(0xe6900064, 1), /* INTMSKCLR10A */ + DEFINE_RES_IRQ(gic_spi(149)), /* IRQ8 */ + DEFINE_RES_IRQ(gic_spi(149)), /* IRQ9 */ + DEFINE_RES_IRQ(gic_spi(149)), /* IRQ10 */ + DEFINE_RES_IRQ(gic_spi(149)), /* IRQ11 */ + DEFINE_RES_IRQ(gic_spi(149)), /* IRQ12 */ + DEFINE_RES_IRQ(gic_spi(149)), /* IRQ13 */ + DEFINE_RES_IRQ(gic_spi(149)), /* IRQ14 */ + DEFINE_RES_IRQ(gic_spi(149)), /* IRQ15 */ +}; + +static struct platform_device irqpin1_device = { + .name = "renesas_intc_irqpin", + .id = 1, + .resource = irqpin1_resources, + .num_resources = ARRAY_SIZE(irqpin1_resources), + .dev = { + .platform_data = &irqpin1_platform_data, + }, +}; + +static struct renesas_intc_irqpin_config irqpin2_platform_data = { + .irq_base = irq_pin(16), /* IRQ16 -> IRQ23 */ +}; + +static struct resource irqpin2_resources[] = { + DEFINE_RES_MEM(0xe6900008, 4), /* ICR3A */ + DEFINE_RES_MEM(0xe6900018, 4), /* INTPRI30A */ + DEFINE_RES_MEM(0xe6900028, 1), /* INTREQ30A */ + DEFINE_RES_MEM(0xe6900048, 1), /* INTMSK30A */ + DEFINE_RES_MEM(0xe6900068, 1), /* INTMSKCLR30A */ + DEFINE_RES_IRQ(gic_spi(149)), /* IRQ16 */ + DEFINE_RES_IRQ(gic_spi(149)), /* IRQ17 */ + DEFINE_RES_IRQ(gic_spi(149)), /* IRQ18 */ + DEFINE_RES_IRQ(gic_spi(149)), /* IRQ19 */ + DEFINE_RES_IRQ(gic_spi(149)), /* IRQ20 */ + DEFINE_RES_IRQ(gic_spi(149)), /* IRQ21 */ + DEFINE_RES_IRQ(gic_spi(149)), /* IRQ22 */ + DEFINE_RES_IRQ(gic_spi(149)), /* IRQ23 */ +}; + +static struct platform_device irqpin2_device = { + .name = "renesas_intc_irqpin", + .id = 2, + .resource = irqpin2_resources, + .num_resources = ARRAY_SIZE(irqpin2_resources), + .dev = { + .platform_data = &irqpin2_platform_data, + }, +}; + +static struct renesas_intc_irqpin_config irqpin3_platform_data = { + .irq_base = irq_pin(24), /* IRQ24 -> IRQ31 */ +}; + +static struct resource irqpin3_resources[] = { + DEFINE_RES_MEM(0xe690000c, 4), /* ICR3A */ + DEFINE_RES_MEM(0xe690001c, 4), /* INTPRI30A */ + DEFINE_RES_MEM(0xe690002c, 1), /* INTREQ30A */ + DEFINE_RES_MEM(0xe690004c, 1), /* INTMSK30A */ + DEFINE_RES_MEM(0xe690006c, 1), /* INTMSKCLR30A */ + DEFINE_RES_IRQ(gic_spi(149)), /* IRQ24 */ + DEFINE_RES_IRQ(gic_spi(149)), /* IRQ25 */ + DEFINE_RES_IRQ(gic_spi(149)), /* IRQ26 */ + DEFINE_RES_IRQ(gic_spi(149)), /* IRQ27 */ + DEFINE_RES_IRQ(gic_spi(149)), /* IRQ28 */ + DEFINE_RES_IRQ(gic_spi(149)), /* IRQ29 */ + DEFINE_RES_IRQ(gic_spi(149)), /* IRQ30 */ + DEFINE_RES_IRQ(gic_spi(149)), /* IRQ31 */ +}; + +static struct platform_device irqpin3_device = { + .name = "renesas_intc_irqpin", + .id = 3, + .resource = irqpin3_resources, + .num_resources = ARRAY_SIZE(irqpin3_resources), + .dev = { + .platform_data = &irqpin3_platform_data, + }, +}; + /* SCIFA0 */ static struct plat_sci_port scif0_platform_data = { .mapbase = 0xe6c40000, @@ -101,7 +222,7 @@ static struct plat_sci_port scif0_platform_data = { .scscr = SCSCR_RE | SCSCR_TE, .scbrr_algo_id = SCBRR_ALGO_4, .type = PORT_SCIFA, - .irqs = SCIx_IRQ_MUXED(evt2irq(0x0c00)), + .irqs = SCIx_IRQ_MUXED(gic_spi(100)), }; static struct platform_device scif0_device = { @@ -119,7 +240,7 @@ static struct plat_sci_port scif1_platform_data = { .scscr = SCSCR_RE | SCSCR_TE, .scbrr_algo_id = SCBRR_ALGO_4, .type = PORT_SCIFA, - .irqs = SCIx_IRQ_MUXED(evt2irq(0x0c20)), + .irqs = SCIx_IRQ_MUXED(gic_spi(101)), }; static struct platform_device scif1_device = { @@ -137,7 +258,7 @@ static struct plat_sci_port scif2_platform_data = { .scscr = SCSCR_RE | SCSCR_TE, .scbrr_algo_id = SCBRR_ALGO_4, .type = PORT_SCIFA, - .irqs = SCIx_IRQ_MUXED(evt2irq(0x0c40)), + .irqs = SCIx_IRQ_MUXED(gic_spi(102)), }; static struct platform_device scif2_device = { @@ -155,7 +276,7 @@ static struct plat_sci_port scif3_platform_data = { .scscr = SCSCR_RE | SCSCR_TE, .scbrr_algo_id = SCBRR_ALGO_4, .type = PORT_SCIFA, - .irqs = SCIx_IRQ_MUXED(evt2irq(0x0c60)), + .irqs = SCIx_IRQ_MUXED(gic_spi(103)), }; static struct platform_device scif3_device = { @@ -173,7 +294,7 @@ static struct plat_sci_port scif4_platform_data = { .scscr = SCSCR_RE | SCSCR_TE, .scbrr_algo_id = SCBRR_ALGO_4, .type = PORT_SCIFA, - .irqs = SCIx_IRQ_MUXED(evt2irq(0x0d20)), + .irqs = SCIx_IRQ_MUXED(gic_spi(104)), }; static struct platform_device scif4_device = { @@ -191,7 +312,7 @@ static struct plat_sci_port scif5_platform_data = { .scscr = SCSCR_RE | SCSCR_TE, .scbrr_algo_id = SCBRR_ALGO_4, .type = PORT_SCIFA, - .irqs = SCIx_IRQ_MUXED(evt2irq(0x0d40)), + .irqs = SCIx_IRQ_MUXED(gic_spi(105)), }; static struct platform_device scif5_device = { @@ -209,7 +330,7 @@ static struct plat_sci_port scif6_platform_data = { .scscr = SCSCR_RE | SCSCR_TE, .scbrr_algo_id = SCBRR_ALGO_4, .type = PORT_SCIFA, - .irqs = SCIx_IRQ_MUXED(evt2irq(0x04c0)), + .irqs = SCIx_IRQ_MUXED(gic_spi(106)), }; static struct platform_device scif6_device = { @@ -227,7 +348,7 @@ static struct plat_sci_port scif7_platform_data = { .scscr = SCSCR_RE | SCSCR_TE, .scbrr_algo_id = SCBRR_ALGO_4, .type = PORT_SCIFA, - .irqs = SCIx_IRQ_MUXED(evt2irq(0x04e0)), + .irqs = SCIx_IRQ_MUXED(gic_spi(107)), }; static struct platform_device scif7_device = { @@ -245,7 +366,7 @@ static struct plat_sci_port scifb_platform_data = { .scscr = SCSCR_RE | SCSCR_TE, .scbrr_algo_id = SCBRR_ALGO_4, .type = PORT_SCIFB, - .irqs = SCIx_IRQ_MUXED(evt2irq(0x0d60)), + .irqs = SCIx_IRQ_MUXED(gic_spi(108)), }; static struct platform_device scifb_device = { @@ -273,7 +394,7 @@ static struct resource cmt10_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = evt2irq(0x0b00), + .start = gic_spi(58), .flags = IORESOURCE_IRQ, }, }; @@ -304,7 +425,7 @@ static struct resource tmu00_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = intcs_evt2irq(0xe80), + .start = gic_spi(198), .flags = IORESOURCE_IRQ, }, }; @@ -334,7 +455,7 @@ static struct resource tmu01_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = intcs_evt2irq(0xea0), + .start = gic_spi(199), .flags = IORESOURCE_IRQ, }, }; @@ -364,7 +485,7 @@ static struct resource tmu02_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = intcs_evt2irq(0xec0), + .start = gic_spi(200), .flags = IORESOURCE_IRQ, }, }; @@ -411,6 +532,10 @@ static struct platform_device ipmmu_device = { }; static struct platform_device *r8a7740_early_devices[] __initdata = { + &irqpin0_device, + &irqpin1_device, + &irqpin2_device, + &irqpin3_device, &scif0_device, &scif1_device, &scif2_device, @@ -525,14 +650,14 @@ static struct resource r8a7740_dmae0_resources[] = { }, { .name = "error_irq", - .start = evt2irq(0x20c0), - .end = evt2irq(0x20c0), + .start = gic_spi(34), + .end = gic_spi(34), .flags = IORESOURCE_IRQ, }, { /* IRQ for channels 0-5 */ - .start = evt2irq(0x2000), - .end = evt2irq(0x20a0), + .start = gic_spi(28), + .end = gic_spi(33), .flags = IORESOURCE_IRQ, }, }; @@ -553,14 +678,14 @@ static struct resource r8a7740_dmae1_resources[] = { }, { .name = "error_irq", - .start = evt2irq(0x21c0), - .end = evt2irq(0x21c0), + .start = gic_spi(41), + .end = gic_spi(41), .flags = IORESOURCE_IRQ, }, { /* IRQ for channels 0-5 */ - .start = evt2irq(0x2100), - .end = evt2irq(0x21a0), + .start = gic_spi(35), + .end = gic_spi(40), .flags = IORESOURCE_IRQ, }, }; @@ -581,14 +706,14 @@ static struct resource r8a7740_dmae2_resources[] = { }, { .name = "error_irq", - .start = evt2irq(0x22c0), - .end = evt2irq(0x22c0), + .start = gic_spi(48), + .end = gic_spi(48), .flags = IORESOURCE_IRQ, }, { /* IRQ for channels 0-5 */ - .start = evt2irq(0x2200), - .end = evt2irq(0x22a0), + .start = gic_spi(42), + .end = gic_spi(47), .flags = IORESOURCE_IRQ, }, }; @@ -677,8 +802,8 @@ static struct resource r8a7740_usb_dma_resources[] = { }, { /* IRQ for channels */ - .start = evt2irq(0x0a00), - .end = evt2irq(0x0a00), + .start = gic_spi(49), + .end = gic_spi(49), .flags = IORESOURCE_IRQ, }, }; @@ -702,8 +827,8 @@ static struct resource i2c0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = intcs_evt2irq(0xe00), - .end = intcs_evt2irq(0xe60), + .start = gic_spi(201), + .end = gic_spi(204), .flags = IORESOURCE_IRQ, }, }; @@ -716,8 +841,8 @@ static struct resource i2c1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = evt2irq(0x780), /* IIC1_ALI1 */ - .end = evt2irq(0x7e0), /* IIC1_DTEI1 */ + .start = gic_spi(70), /* IIC1_ALI1 */ + .end = gic_spi(73), /* IIC1_DTEI1 */ .flags = IORESOURCE_IRQ, }, }; @@ -738,8 +863,8 @@ static struct platform_device i2c1_device = { static struct resource pmu_resources[] = { [0] = { - .start = evt2irq(0x19a0), - .end = evt2irq(0x19a0), + .start = gic_spi(83), + .end = gic_spi(83), .flags = IORESOURCE_IRQ, }, }; @@ -904,9 +1029,7 @@ DT_MACHINE_START(R8A7740_DT, "Generic R8A7740 (Flattened Device Tree)") .map_io = r8a7740_map_io, .init_early = r8a7740_add_early_devices_dt, .init_irq = r8a7740_init_irq, - .handle_irq = shmobile_handle_irq_intc, .init_machine = r8a7740_add_standard_devices_dt, - .init_time = shmobile_timer_init, .dt_compat = r8a7740_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c new file mode 100644 index 000000000000..30b4a336308f --- /dev/null +++ b/arch/arm/mach-shmobile/setup-r8a7778.c @@ -0,0 +1,244 @@ +/* + * r8a7778 processor support + * + * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> + * Copyright (C) 2013 Cogent Embedded, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/kernel.h> +#include <linux/io.h> +#include <linux/irqchip/arm-gic.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/platform_data/irq-renesas-intc-irqpin.h> +#include <linux/platform_device.h> +#include <linux/irqchip.h> +#include <linux/serial_sci.h> +#include <linux/sh_timer.h> +#include <mach/irqs.h> +#include <mach/r8a7778.h> +#include <mach/common.h> +#include <asm/mach/arch.h> +#include <asm/hardware/cache-l2x0.h> + +/* SCIF */ +#define SCIF_INFO(baseaddr, irq) \ +{ \ + .mapbase = baseaddr, \ + .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, \ + .scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE1, \ + .scbrr_algo_id = SCBRR_ALGO_2, \ + .type = PORT_SCIF, \ + .irqs = SCIx_IRQ_MUXED(irq), \ +} + +static struct plat_sci_port scif_platform_data[] = { + SCIF_INFO(0xffe40000, gic_iid(0x66)), + SCIF_INFO(0xffe41000, gic_iid(0x67)), + SCIF_INFO(0xffe42000, gic_iid(0x68)), + SCIF_INFO(0xffe43000, gic_iid(0x69)), + SCIF_INFO(0xffe44000, gic_iid(0x6a)), + SCIF_INFO(0xffe45000, gic_iid(0x6b)), +}; + +/* TMU */ +static struct resource sh_tmu0_resources[] = { + DEFINE_RES_MEM(0xffd80008, 12), + DEFINE_RES_IRQ(gic_iid(0x40)), +}; + +static struct sh_timer_config sh_tmu0_platform_data = { + .name = "TMU00", + .channel_offset = 0x4, + .timer_bit = 0, + .clockevent_rating = 200, +}; + +static struct resource sh_tmu1_resources[] = { + DEFINE_RES_MEM(0xffd80014, 12), + DEFINE_RES_IRQ(gic_iid(0x41)), +}; + +static struct sh_timer_config sh_tmu1_platform_data = { + .name = "TMU01", + .channel_offset = 0x10, + .timer_bit = 1, + .clocksource_rating = 200, +}; + +/* Ether */ +static struct resource ether_resources[] = { + DEFINE_RES_MEM(0xfde00000, 0x400), + DEFINE_RES_IRQ(gic_iid(0x89)), +}; + +#define r8a7778_register_tmu(idx) \ + platform_device_register_resndata( \ + &platform_bus, "sh_tmu", idx, \ + sh_tmu##idx##_resources, \ + ARRAY_SIZE(sh_tmu##idx##_resources), \ + &sh_tmu##idx##_platform_data, \ + sizeof(sh_tmu##idx##_platform_data)) + +void __init r8a7778_add_standard_devices(void) +{ + int i; + +#ifdef CONFIG_CACHE_L2X0 + void __iomem *base = ioremap_nocache(0xf0100000, 0x1000); + if (base) { + /* + * Early BRESP enable, Shared attribute override enable, 64K*16way + * don't call iounmap(base) + */ + l2x0_init(base, 0x40470000, 0x82000fff); + } +#endif + + for (i = 0; i < ARRAY_SIZE(scif_platform_data); i++) + platform_device_register_data(&platform_bus, "sh-sci", i, + &scif_platform_data[i], + sizeof(struct plat_sci_port)); + + r8a7778_register_tmu(0); + r8a7778_register_tmu(1); +} + +void __init r8a7778_add_ether_device(struct sh_eth_plat_data *pdata) +{ + platform_device_register_resndata(&platform_bus, "sh_eth", -1, + ether_resources, + ARRAY_SIZE(ether_resources), + pdata, sizeof(*pdata)); +} + +static struct renesas_intc_irqpin_config irqpin_platform_data = { + .irq_base = irq_pin(0), /* IRQ0 -> IRQ3 */ + .sense_bitfield_width = 2, +}; + +static struct resource irqpin_resources[] = { + DEFINE_RES_MEM(0xfe78001c, 4), /* ICR1 */ + DEFINE_RES_MEM(0xfe780010, 4), /* INTPRI */ + DEFINE_RES_MEM(0xfe780024, 4), /* INTREQ */ + DEFINE_RES_MEM(0xfe780044, 4), /* INTMSK0 */ + DEFINE_RES_MEM(0xfe780064, 4), /* INTMSKCLR0 */ + DEFINE_RES_IRQ(gic_iid(0x3b)), /* IRQ0 */ + DEFINE_RES_IRQ(gic_iid(0x3c)), /* IRQ1 */ + DEFINE_RES_IRQ(gic_iid(0x3d)), /* IRQ2 */ + DEFINE_RES_IRQ(gic_iid(0x3e)), /* IRQ3 */ +}; + +void __init r8a7778_init_irq_extpin(int irlm) +{ + void __iomem *icr0 = ioremap_nocache(0xfe780000, PAGE_SIZE); + unsigned long tmp; + + if (!icr0) { + pr_warn("r8a7778: unable to setup external irq pin mode\n"); + return; + } + + tmp = ioread32(icr0); + if (irlm) + tmp |= 1 << 23; /* IRQ0 -> IRQ3 as individual pins */ + else + tmp &= ~(1 << 23); /* IRL mode - not supported */ + tmp |= (1 << 21); /* LVLMODE = 1 */ + iowrite32(tmp, icr0); + iounmap(icr0); + + if (irlm) + platform_device_register_resndata( + &platform_bus, "renesas_intc_irqpin", -1, + irqpin_resources, ARRAY_SIZE(irqpin_resources), + &irqpin_platform_data, sizeof(irqpin_platform_data)); +} + +#define INT2SMSKCR0 0x82288 /* 0xfe782288 */ +#define INT2SMSKCR1 0x8228c /* 0xfe78228c */ + +#define INT2NTSR0 0x00018 /* 0xfe700018 */ +#define INT2NTSR1 0x0002c /* 0xfe70002c */ +static void __init r8a7778_init_irq_common(void) +{ + void __iomem *base = ioremap_nocache(0xfe700000, 0x00100000); + + BUG_ON(!base); + + /* route all interrupts to ARM */ + __raw_writel(0x73ffffff, base + INT2NTSR0); + __raw_writel(0xffffffff, base + INT2NTSR1); + + /* unmask all known interrupts in INTCS2 */ + __raw_writel(0x08330773, base + INT2SMSKCR0); + __raw_writel(0x00311110, base + INT2SMSKCR1); + + iounmap(base); +} + +void __init r8a7778_init_irq(void) +{ + void __iomem *gic_dist_base; + void __iomem *gic_cpu_base; + + gic_dist_base = ioremap_nocache(0xfe438000, PAGE_SIZE); + gic_cpu_base = ioremap_nocache(0xfe430000, PAGE_SIZE); + BUG_ON(!gic_dist_base || !gic_cpu_base); + + /* use GIC to handle interrupts */ + gic_init(0, 29, gic_dist_base, gic_cpu_base); + + r8a7778_init_irq_common(); +} + +void __init r8a7778_init_delay(void) +{ + shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */ +} + +#ifdef CONFIG_USE_OF +void __init r8a7778_init_irq_dt(void) +{ + irqchip_init(); + r8a7778_init_irq_common(); +} + +static const struct of_dev_auxdata r8a7778_auxdata_lookup[] __initconst = { + {}, +}; + +void __init r8a7778_add_standard_devices_dt(void) +{ + of_platform_populate(NULL, of_default_bus_match_table, + r8a7778_auxdata_lookup, NULL); +} + +static const char *r8a7778_compat_dt[] __initdata = { + "renesas,r8a7778", + NULL, +}; + +DT_MACHINE_START(R8A7778_DT, "Generic R8A7778 (Flattened Device Tree)") + .init_early = r8a7778_init_delay, + .init_irq = r8a7778_init_irq_dt, + .init_machine = r8a7778_add_standard_devices_dt, + .init_time = shmobile_timer_init, + .dt_compat = r8a7778_compat_dt, +MACHINE_END + +#endif /* CONFIG_USE_OF */ diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c index c54ff9b29fe5..b0b394842ea5 100644 --- a/arch/arm/mach-shmobile/setup-r8a7779.c +++ b/arch/arm/mach-shmobile/setup-r8a7779.c @@ -1,8 +1,9 @@ /* * r8a7779 processor support * - * Copyright (C) 2011 Renesas Solutions Corp. + * Copyright (C) 2011, 2013 Renesas Solutions Corp. * Copyright (C) 2011 Magnus Damm + * Copyright (C) 2013 Cogent Embedded, Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -21,6 +22,8 @@ #include <linux/init.h> #include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/of_platform.h> +#include <linux/platform_data/gpio-rcar.h> #include <linux/platform_device.h> #include <linux/delay.h> #include <linux/input.h> @@ -28,6 +31,7 @@ #include <linux/serial_sci.h> #include <linux/sh_intc.h> #include <linux/sh_timer.h> +#include <linux/dma-mapping.h> #include <mach/hardware.h> #include <mach/irqs.h> #include <mach/r8a7779.h> @@ -66,11 +70,6 @@ static struct resource r8a7779_pfc_resources[] = { .end = 0xfffc023b, .flags = IORESOURCE_MEM, }, - [1] = { - .start = 0xffc40000, - .end = 0xffc46fff, - .flags = IORESOURCE_MEM, - } }; static struct platform_device r8a7779_pfc_device = { @@ -80,9 +79,59 @@ static struct platform_device r8a7779_pfc_device = { .num_resources = ARRAY_SIZE(r8a7779_pfc_resources), }; +#define R8A7779_GPIO(idx, npins) \ +static struct resource r8a7779_gpio##idx##_resources[] = { \ + [0] = { \ + .start = 0xffc40000 + 0x1000 * (idx), \ + .end = 0xffc4002b + 0x1000 * (idx), \ + .flags = IORESOURCE_MEM, \ + }, \ + [1] = { \ + .start = gic_iid(0xad + (idx)), \ + .flags = IORESOURCE_IRQ, \ + } \ +}; \ + \ +static struct gpio_rcar_config r8a7779_gpio##idx##_platform_data = { \ + .gpio_base = 32 * (idx), \ + .irq_base = 0, \ + .number_of_pins = npins, \ + .pctl_name = "pfc-r8a7779", \ +}; \ + \ +static struct platform_device r8a7779_gpio##idx##_device = { \ + .name = "gpio_rcar", \ + .id = idx, \ + .resource = r8a7779_gpio##idx##_resources, \ + .num_resources = ARRAY_SIZE(r8a7779_gpio##idx##_resources), \ + .dev = { \ + .platform_data = &r8a7779_gpio##idx##_platform_data, \ + }, \ +} + +R8A7779_GPIO(0, 32); +R8A7779_GPIO(1, 32); +R8A7779_GPIO(2, 32); +R8A7779_GPIO(3, 32); +R8A7779_GPIO(4, 32); +R8A7779_GPIO(5, 32); +R8A7779_GPIO(6, 9); + +static struct platform_device *r8a7779_pinctrl_devices[] __initdata = { + &r8a7779_pfc_device, + &r8a7779_gpio0_device, + &r8a7779_gpio1_device, + &r8a7779_gpio2_device, + &r8a7779_gpio3_device, + &r8a7779_gpio4_device, + &r8a7779_gpio5_device, + &r8a7779_gpio6_device, +}; + void __init r8a7779_pinmux_init(void) { - platform_device_register(&r8a7779_pfc_device); + platform_add_devices(r8a7779_pinctrl_devices, + ARRAY_SIZE(r8a7779_pinctrl_devices)); } static struct plat_sci_port scif0_platform_data = { @@ -91,7 +140,7 @@ static struct plat_sci_port scif0_platform_data = { .scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE1, .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCIF, - .irqs = SCIx_IRQ_MUXED(gic_spi(88)), + .irqs = SCIx_IRQ_MUXED(gic_iid(0x78)), }; static struct platform_device scif0_device = { @@ -108,7 +157,7 @@ static struct plat_sci_port scif1_platform_data = { .scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE1, .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCIF, - .irqs = SCIx_IRQ_MUXED(gic_spi(89)), + .irqs = SCIx_IRQ_MUXED(gic_iid(0x79)), }; static struct platform_device scif1_device = { @@ -125,7 +174,7 @@ static struct plat_sci_port scif2_platform_data = { .scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE1, .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCIF, - .irqs = SCIx_IRQ_MUXED(gic_spi(90)), + .irqs = SCIx_IRQ_MUXED(gic_iid(0x7a)), }; static struct platform_device scif2_device = { @@ -142,7 +191,7 @@ static struct plat_sci_port scif3_platform_data = { .scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE1, .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCIF, - .irqs = SCIx_IRQ_MUXED(gic_spi(91)), + .irqs = SCIx_IRQ_MUXED(gic_iid(0x7b)), }; static struct platform_device scif3_device = { @@ -159,7 +208,7 @@ static struct plat_sci_port scif4_platform_data = { .scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE1, .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCIF, - .irqs = SCIx_IRQ_MUXED(gic_spi(92)), + .irqs = SCIx_IRQ_MUXED(gic_iid(0x7c)), }; static struct platform_device scif4_device = { @@ -176,7 +225,7 @@ static struct plat_sci_port scif5_platform_data = { .scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE1, .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCIF, - .irqs = SCIx_IRQ_MUXED(gic_spi(93)), + .irqs = SCIx_IRQ_MUXED(gic_iid(0x7d)), }; static struct platform_device scif5_device = { @@ -203,7 +252,7 @@ static struct resource tmu00_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = gic_spi(32), + .start = gic_iid(0x40), .flags = IORESOURCE_IRQ, }, }; @@ -233,7 +282,7 @@ static struct resource tmu01_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = gic_spi(33), + .start = gic_iid(0x41), .flags = IORESOURCE_IRQ, }, }; @@ -255,7 +304,7 @@ static struct resource rcar_i2c0_res[] = { .end = 0xffc70fff, .flags = IORESOURCE_MEM, }, { - .start = gic_spi(79), + .start = gic_iid(0x6f), .flags = IORESOURCE_IRQ, }, }; @@ -273,7 +322,7 @@ static struct resource rcar_i2c1_res[] = { .end = 0xffc71fff, .flags = IORESOURCE_MEM, }, { - .start = gic_spi(82), + .start = gic_iid(0x72), .flags = IORESOURCE_IRQ, }, }; @@ -291,7 +340,7 @@ static struct resource rcar_i2c2_res[] = { .end = 0xffc72fff, .flags = IORESOURCE_MEM, }, { - .start = gic_spi(80), + .start = gic_iid(0x70), .flags = IORESOURCE_IRQ, }, }; @@ -309,7 +358,7 @@ static struct resource rcar_i2c3_res[] = { .end = 0xffc73fff, .flags = IORESOURCE_MEM, }, { - .start = gic_spi(81), + .start = gic_iid(0x71), .flags = IORESOURCE_IRQ, }, }; @@ -321,7 +370,43 @@ static struct platform_device i2c3_device = { .num_resources = ARRAY_SIZE(rcar_i2c3_res), }; -static struct platform_device *r8a7779_early_devices[] __initdata = { +static struct resource sata_resources[] = { + [0] = { + .name = "rcar-sata", + .start = 0xfc600000, + .end = 0xfc601fff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = gic_iid(0x84), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device sata_device = { + .name = "sata_rcar", + .id = -1, + .resource = sata_resources, + .num_resources = ARRAY_SIZE(sata_resources), + .dev = { + .dma_mask = &sata_device.dev.coherent_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +/* Ether */ +static struct resource ether_resources[] = { + { + .start = 0xfde00000, + .end = 0xfde003ff, + .flags = IORESOURCE_MEM, + }, { + .start = gic_iid(0xb4), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device *r8a7779_devices_dt[] __initdata = { &scif0_device, &scif1_device, &scif2_device, @@ -330,13 +415,14 @@ static struct platform_device *r8a7779_early_devices[] __initdata = { &scif5_device, &tmu00_device, &tmu01_device, +}; + +static struct platform_device *r8a7779_late_devices[] __initdata = { &i2c0_device, &i2c1_device, &i2c2_device, &i2c3_device, -}; - -static struct platform_device *r8a7779_late_devices[] __initdata = { + &sata_device, }; void __init r8a7779_add_standard_devices(void) @@ -349,12 +435,20 @@ void __init r8a7779_add_standard_devices(void) r8a7779_init_pm_domains(); - platform_add_devices(r8a7779_early_devices, - ARRAY_SIZE(r8a7779_early_devices)); + platform_add_devices(r8a7779_devices_dt, + ARRAY_SIZE(r8a7779_devices_dt)); platform_add_devices(r8a7779_late_devices, ARRAY_SIZE(r8a7779_late_devices)); } +void __init r8a7779_add_ether_device(struct sh_eth_plat_data *pdata) +{ + platform_device_register_resndata(&platform_bus, "sh_eth", -1, + ether_resources, + ARRAY_SIZE(ether_resources), + pdata, sizeof(*pdata)); +} + /* do nothing for !CONFIG_SMP or !CONFIG_HAVE_TWD */ void __init __weak r8a7779_register_twd(void) { } @@ -367,8 +461,8 @@ void __init r8a7779_earlytimer_init(void) void __init r8a7779_add_early_devices(void) { - early_platform_add_devices(r8a7779_early_devices, - ARRAY_SIZE(r8a7779_early_devices)); + early_platform_add_devices(r8a7779_devices_dt, + ARRAY_SIZE(r8a7779_devices_dt)); /* Early serial console setup is not included here due to * memory map collisions. The SCIF serial ports in r8a7779 @@ -386,3 +480,40 @@ void __init r8a7779_add_early_devices(void) * command line in case of the marzen board. */ } + +#ifdef CONFIG_USE_OF +void __init r8a7779_init_delay(void) +{ + shmobile_setup_delay(1000, 2, 4); /* Cortex-A9 @ 1000MHz */ +} + +static const struct of_dev_auxdata r8a7779_auxdata_lookup[] __initconst = { + {}, +}; + +void __init r8a7779_add_standard_devices_dt(void) +{ + /* clocks are setup late during boot in the case of DT */ + r8a7779_clock_init(); + + platform_add_devices(r8a7779_devices_dt, + ARRAY_SIZE(r8a7779_devices_dt)); + of_platform_populate(NULL, of_default_bus_match_table, + r8a7779_auxdata_lookup, NULL); +} + +static const char *r8a7779_compat_dt[] __initdata = { + "renesas,r8a7779", + NULL, +}; + +DT_MACHINE_START(R8A7779_DT, "Generic R8A7779 (Flattened Device Tree)") + .map_io = r8a7779_map_io, + .init_early = r8a7779_init_delay, + .nr_irqs = NR_IRQS_LEGACY, + .init_irq = r8a7779_init_irq_dt, + .init_machine = r8a7779_add_standard_devices_dt, + .init_time = shmobile_timer_init, + .dt_compat = r8a7779_compat_dt, +MACHINE_END +#endif /* CONFIG_USE_OF */ diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c new file mode 100644 index 000000000000..49de2d56f86d --- /dev/null +++ b/arch/arm/mach-shmobile/setup-r8a7790.c @@ -0,0 +1,150 @@ +/* + * r8a7790 processor support + * + * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/irq.h> +#include <linux/irqchip.h> +#include <linux/kernel.h> +#include <linux/of_platform.h> +#include <linux/serial_sci.h> +#include <linux/platform_data/irq-renesas-irqc.h> +#include <mach/common.h> +#include <mach/irqs.h> +#include <mach/r8a7790.h> +#include <asm/mach/arch.h> + +static const struct resource pfc_resources[] = { + DEFINE_RES_MEM(0xe6060000, 0x250), + DEFINE_RES_MEM(0xe6050000, 0x5050), +}; + +void __init r8a7790_pinmux_init(void) +{ + platform_device_register_simple("pfc-r8a7790", -1, pfc_resources, + ARRAY_SIZE(pfc_resources)); +} + +#define SCIF_COMMON(scif_type, baseaddr, irq) \ + .type = scif_type, \ + .mapbase = baseaddr, \ + .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, \ + .irqs = SCIx_IRQ_MUXED(irq) + +#define SCIFA_DATA(index, baseaddr, irq) \ +[index] = { \ + SCIF_COMMON(PORT_SCIFA, baseaddr, irq), \ + .scbrr_algo_id = SCBRR_ALGO_4, \ + .scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE0, \ +} + +#define SCIFB_DATA(index, baseaddr, irq) \ +[index] = { \ + SCIF_COMMON(PORT_SCIFB, baseaddr, irq), \ + .scbrr_algo_id = SCBRR_ALGO_4, \ + .scscr = SCSCR_RE | SCSCR_TE, \ +} + +#define SCIF_DATA(index, baseaddr, irq) \ +[index] = { \ + SCIF_COMMON(PORT_SCIF, baseaddr, irq), \ + .scbrr_algo_id = SCBRR_ALGO_2, \ + .scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE1, \ +} + +enum { SCIFA0, SCIFA1, SCIFB0, SCIFB1, SCIFB2, SCIFA2, SCIF0, SCIF1 }; + +static const struct plat_sci_port scif[] = { + SCIFA_DATA(SCIFA0, 0xe6c40000, gic_spi(144)), /* SCIFA0 */ + SCIFA_DATA(SCIFA1, 0xe6c50000, gic_spi(145)), /* SCIFA1 */ + SCIFB_DATA(SCIFB0, 0xe6c20000, gic_spi(148)), /* SCIFB0 */ + SCIFB_DATA(SCIFB1, 0xe6c30000, gic_spi(149)), /* SCIFB1 */ + SCIFB_DATA(SCIFB2, 0xe6ce0000, gic_spi(150)), /* SCIFB2 */ + SCIFA_DATA(SCIFA2, 0xe6c60000, gic_spi(151)), /* SCIFA2 */ + SCIF_DATA(SCIF0, 0xe6e60000, gic_spi(152)), /* SCIF0 */ + SCIF_DATA(SCIF1, 0xe6e68000, gic_spi(153)), /* SCIF1 */ +}; + +static inline void r8a7790_register_scif(int idx) +{ + platform_device_register_data(&platform_bus, "sh-sci", idx, &scif[idx], + sizeof(struct plat_sci_port)); +} + +static struct renesas_irqc_config irqc0_data = { + .irq_base = irq_pin(0), /* IRQ0 -> IRQ3 */ +}; + +static struct resource irqc0_resources[] = { + DEFINE_RES_MEM(0xe61c0000, 0x200), /* IRQC Event Detector Block_0 */ + DEFINE_RES_IRQ(gic_spi(0)), /* IRQ0 */ + DEFINE_RES_IRQ(gic_spi(1)), /* IRQ1 */ + DEFINE_RES_IRQ(gic_spi(2)), /* IRQ2 */ + DEFINE_RES_IRQ(gic_spi(3)), /* IRQ3 */ +}; + +#define r8a7790_register_irqc(idx) \ + platform_device_register_resndata(&platform_bus, "renesas_irqc", \ + idx, irqc##idx##_resources, \ + ARRAY_SIZE(irqc##idx##_resources), \ + &irqc##idx##_data, \ + sizeof(struct renesas_irqc_config)) + +void __init r8a7790_add_standard_devices(void) +{ + r8a7790_register_scif(SCIFA0); + r8a7790_register_scif(SCIFA1); + r8a7790_register_scif(SCIFB0); + r8a7790_register_scif(SCIFB1); + r8a7790_register_scif(SCIFB2); + r8a7790_register_scif(SCIFA2); + r8a7790_register_scif(SCIF0); + r8a7790_register_scif(SCIF1); + r8a7790_register_irqc(0); +} + +void __init r8a7790_timer_init(void) +{ + void __iomem *cntcr; + + /* make sure arch timer is started by setting bit 0 of CNTCT */ + cntcr = ioremap(0xe6080000, PAGE_SIZE); + iowrite32(1, cntcr); + iounmap(cntcr); + + shmobile_timer_init(); +} + +#ifdef CONFIG_USE_OF +void __init r8a7790_add_standard_devices_dt(void) +{ + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); +} + +static const char *r8a7790_boards_compat_dt[] __initdata = { + "renesas,r8a7790", + NULL, +}; + +DT_MACHINE_START(R8A7790_DT, "Generic R8A7790 (Flattened Device Tree)") + .init_irq = irqchip_init, + .init_machine = r8a7790_add_standard_devices_dt, + .init_time = r8a7790_timer_init, + .dt_compat = r8a7790_boards_compat_dt, +MACHINE_END +#endif /* CONFIG_USE_OF */ diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c index 59c7146bf66f..5502d624aca6 100644 --- a/arch/arm/mach-shmobile/setup-sh7372.c +++ b/arch/arm/mach-shmobile/setup-sh7372.c @@ -1175,7 +1175,6 @@ DT_MACHINE_START(SH7372_DT, "Generic SH7372 (Flattened Device Tree)") .init_irq = sh7372_init_irq, .handle_irq = shmobile_handle_irq_intc, .init_machine = sh7372_add_standard_devices_dt, - .init_time = shmobile_timer_init, .dt_compat = sh7372_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c index bdab575f88bc..fdf3894b1cc3 100644 --- a/arch/arm/mach-shmobile/setup-sh73a0.c +++ b/arch/arm/mach-shmobile/setup-sh73a0.c @@ -22,6 +22,7 @@ #include <linux/init.h> #include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/irqchip.h> #include <linux/platform_device.h> #include <linux/of_platform.h> #include <linux/delay.h> @@ -32,6 +33,7 @@ #include <linux/sh_intc.h> #include <linux/sh_timer.h> #include <linux/platform_data/sh_ipmmu.h> +#include <linux/platform_data/irq-renesas-intc-irqpin.h> #include <mach/dma-register.h> #include <mach/hardware.h> #include <mach/irqs.h> @@ -810,7 +812,128 @@ static struct platform_device ipmmu_device = { .num_resources = ARRAY_SIZE(ipmmu_resources), }; -static struct platform_device *sh73a0_early_devices_dt[] __initdata = { +static struct renesas_intc_irqpin_config irqpin0_platform_data = { + .irq_base = irq_pin(0), /* IRQ0 -> IRQ7 */ +}; + +static struct resource irqpin0_resources[] = { + DEFINE_RES_MEM(0xe6900000, 4), /* ICR1A */ + DEFINE_RES_MEM(0xe6900010, 4), /* INTPRI00A */ + DEFINE_RES_MEM(0xe6900020, 1), /* INTREQ00A */ + DEFINE_RES_MEM(0xe6900040, 1), /* INTMSK00A */ + DEFINE_RES_MEM(0xe6900060, 1), /* INTMSKCLR00A */ + DEFINE_RES_IRQ(gic_spi(1)), /* IRQ0 */ + DEFINE_RES_IRQ(gic_spi(2)), /* IRQ1 */ + DEFINE_RES_IRQ(gic_spi(3)), /* IRQ2 */ + DEFINE_RES_IRQ(gic_spi(4)), /* IRQ3 */ + DEFINE_RES_IRQ(gic_spi(5)), /* IRQ4 */ + DEFINE_RES_IRQ(gic_spi(6)), /* IRQ5 */ + DEFINE_RES_IRQ(gic_spi(7)), /* IRQ6 */ + DEFINE_RES_IRQ(gic_spi(8)), /* IRQ7 */ +}; + +static struct platform_device irqpin0_device = { + .name = "renesas_intc_irqpin", + .id = 0, + .resource = irqpin0_resources, + .num_resources = ARRAY_SIZE(irqpin0_resources), + .dev = { + .platform_data = &irqpin0_platform_data, + }, +}; + +static struct renesas_intc_irqpin_config irqpin1_platform_data = { + .irq_base = irq_pin(8), /* IRQ8 -> IRQ15 */ + .control_parent = true, /* Disable spurious IRQ10 */ +}; + +static struct resource irqpin1_resources[] = { + DEFINE_RES_MEM(0xe6900004, 4), /* ICR2A */ + DEFINE_RES_MEM(0xe6900014, 4), /* INTPRI10A */ + DEFINE_RES_MEM(0xe6900024, 1), /* INTREQ10A */ + DEFINE_RES_MEM(0xe6900044, 1), /* INTMSK10A */ + DEFINE_RES_MEM(0xe6900064, 1), /* INTMSKCLR10A */ + DEFINE_RES_IRQ(gic_spi(9)), /* IRQ8 */ + DEFINE_RES_IRQ(gic_spi(10)), /* IRQ9 */ + DEFINE_RES_IRQ(gic_spi(11)), /* IRQ10 */ + DEFINE_RES_IRQ(gic_spi(12)), /* IRQ11 */ + DEFINE_RES_IRQ(gic_spi(13)), /* IRQ12 */ + DEFINE_RES_IRQ(gic_spi(14)), /* IRQ13 */ + DEFINE_RES_IRQ(gic_spi(15)), /* IRQ14 */ + DEFINE_RES_IRQ(gic_spi(16)), /* IRQ15 */ +}; + +static struct platform_device irqpin1_device = { + .name = "renesas_intc_irqpin", + .id = 1, + .resource = irqpin1_resources, + .num_resources = ARRAY_SIZE(irqpin1_resources), + .dev = { + .platform_data = &irqpin1_platform_data, + }, +}; + +static struct renesas_intc_irqpin_config irqpin2_platform_data = { + .irq_base = irq_pin(16), /* IRQ16 -> IRQ23 */ +}; + +static struct resource irqpin2_resources[] = { + DEFINE_RES_MEM(0xe6900008, 4), /* ICR3A */ + DEFINE_RES_MEM(0xe6900018, 4), /* INTPRI20A */ + DEFINE_RES_MEM(0xe6900028, 1), /* INTREQ20A */ + DEFINE_RES_MEM(0xe6900048, 1), /* INTMSK20A */ + DEFINE_RES_MEM(0xe6900068, 1), /* INTMSKCLR20A */ + DEFINE_RES_IRQ(gic_spi(17)), /* IRQ16 */ + DEFINE_RES_IRQ(gic_spi(18)), /* IRQ17 */ + DEFINE_RES_IRQ(gic_spi(19)), /* IRQ18 */ + DEFINE_RES_IRQ(gic_spi(20)), /* IRQ19 */ + DEFINE_RES_IRQ(gic_spi(21)), /* IRQ20 */ + DEFINE_RES_IRQ(gic_spi(22)), /* IRQ21 */ + DEFINE_RES_IRQ(gic_spi(23)), /* IRQ22 */ + DEFINE_RES_IRQ(gic_spi(24)), /* IRQ23 */ +}; + +static struct platform_device irqpin2_device = { + .name = "renesas_intc_irqpin", + .id = 2, + .resource = irqpin2_resources, + .num_resources = ARRAY_SIZE(irqpin2_resources), + .dev = { + .platform_data = &irqpin2_platform_data, + }, +}; + +static struct renesas_intc_irqpin_config irqpin3_platform_data = { + .irq_base = irq_pin(24), /* IRQ24 -> IRQ31 */ +}; + +static struct resource irqpin3_resources[] = { + DEFINE_RES_MEM(0xe690000c, 4), /* ICR4A */ + DEFINE_RES_MEM(0xe690001c, 4), /* INTPRI30A */ + DEFINE_RES_MEM(0xe690002c, 1), /* INTREQ30A */ + DEFINE_RES_MEM(0xe690004c, 1), /* INTMSK30A */ + DEFINE_RES_MEM(0xe690006c, 1), /* INTMSKCLR30A */ + DEFINE_RES_IRQ(gic_spi(25)), /* IRQ24 */ + DEFINE_RES_IRQ(gic_spi(26)), /* IRQ25 */ + DEFINE_RES_IRQ(gic_spi(27)), /* IRQ26 */ + DEFINE_RES_IRQ(gic_spi(28)), /* IRQ27 */ + DEFINE_RES_IRQ(gic_spi(29)), /* IRQ28 */ + DEFINE_RES_IRQ(gic_spi(30)), /* IRQ29 */ + DEFINE_RES_IRQ(gic_spi(31)), /* IRQ30 */ + DEFINE_RES_IRQ(gic_spi(32)), /* IRQ31 */ +}; + +static struct platform_device irqpin3_device = { + .name = "renesas_intc_irqpin", + .id = 3, + .resource = irqpin3_resources, + .num_resources = ARRAY_SIZE(irqpin3_resources), + .dev = { + .platform_data = &irqpin3_platform_data, + }, +}; + +static struct platform_device *sh73a0_devices_dt[] __initdata = { &scif0_device, &scif1_device, &scif2_device, @@ -838,6 +961,10 @@ static struct platform_device *sh73a0_late_devices[] __initdata = { &dma0_device, &mpdma0_device, &pmu_device, + &irqpin0_device, + &irqpin1_device, + &irqpin2_device, + &irqpin3_device, }; #define SRCR2 IOMEM(0xe61580b0) @@ -847,8 +974,8 @@ void __init sh73a0_add_standard_devices(void) /* Clear software reset bit on SY-DMAC module */ __raw_writel(__raw_readl(SRCR2) & ~(1 << 18), SRCR2); - platform_add_devices(sh73a0_early_devices_dt, - ARRAY_SIZE(sh73a0_early_devices_dt)); + platform_add_devices(sh73a0_devices_dt, + ARRAY_SIZE(sh73a0_devices_dt)); platform_add_devices(sh73a0_early_devices, ARRAY_SIZE(sh73a0_early_devices)); platform_add_devices(sh73a0_late_devices, @@ -867,8 +994,8 @@ void __init sh73a0_earlytimer_init(void) void __init sh73a0_add_early_devices(void) { - early_platform_add_devices(sh73a0_early_devices_dt, - ARRAY_SIZE(sh73a0_early_devices_dt)); + early_platform_add_devices(sh73a0_devices_dt, + ARRAY_SIZE(sh73a0_devices_dt)); early_platform_add_devices(sh73a0_early_devices, ARRAY_SIZE(sh73a0_early_devices)); @@ -878,23 +1005,9 @@ void __init sh73a0_add_early_devices(void) #ifdef CONFIG_USE_OF -/* Please note that the clock initialisation shcheme used in - * sh73a0_add_early_devices_dt() and sh73a0_add_standard_devices_dt() - * does not work with SMP as there is a yet to be resolved lock-up in - * workqueue initialisation. - * - * CONFIG_SMP should be disabled when using this code. - */ - -void __init sh73a0_add_early_devices_dt(void) +void __init sh73a0_init_delay(void) { shmobile_setup_delay(1196, 44, 46); /* Cortex-A9 @ 1196MHz */ - - early_platform_add_devices(sh73a0_early_devices_dt, - ARRAY_SIZE(sh73a0_early_devices_dt)); - - /* setup early console here as well */ - shmobile_setup_console(); } static const struct of_dev_auxdata sh73a0_auxdata_lookup[] __initconst = { @@ -906,8 +1019,8 @@ void __init sh73a0_add_standard_devices_dt(void) /* clocks are setup late during boot in the case of DT */ sh73a0_clock_init(); - platform_add_devices(sh73a0_early_devices_dt, - ARRAY_SIZE(sh73a0_early_devices_dt)); + platform_add_devices(sh73a0_devices_dt, + ARRAY_SIZE(sh73a0_devices_dt)); of_platform_populate(NULL, of_default_bus_match_table, sh73a0_auxdata_lookup, NULL); } @@ -918,12 +1031,12 @@ static const char *sh73a0_boards_compat_dt[] __initdata = { }; DT_MACHINE_START(SH73A0_DT, "Generic SH73A0 (Flattened Device Tree)") + .smp = smp_ops(sh73a0_smp_ops), .map_io = sh73a0_map_io, - .init_early = sh73a0_add_early_devices_dt, + .init_early = sh73a0_init_delay, .nr_irqs = NR_IRQS_LEGACY, - .init_irq = sh73a0_init_irq_dt, + .init_irq = irqchip_init, .init_machine = sh73a0_add_standard_devices_dt, - .init_time = shmobile_timer_init, .dt_compat = sh73a0_boards_compat_dt, MACHINE_END #endif /* CONFIG_USE_OF */ diff --git a/arch/arm/mach-shmobile/smp-emev2.c b/arch/arm/mach-shmobile/smp-emev2.c index 953eb1f9388d..e38691b4d0dd 100644 --- a/arch/arm/mach-shmobile/smp-emev2.c +++ b/arch/arm/mach-shmobile/smp-emev2.c @@ -23,100 +23,39 @@ #include <linux/spinlock.h> #include <linux/io.h> #include <linux/delay.h> -#include <linux/irqchip/arm-gic.h> #include <mach/common.h> #include <mach/emev2.h> #include <asm/smp_plat.h> #include <asm/smp_scu.h> -#include <asm/cacheflush.h> #define EMEV2_SCU_BASE 0x1e000000 -static DEFINE_SPINLOCK(scu_lock); -static void __iomem *scu_base; - -static void modify_scu_cpu_psr(unsigned long set, unsigned long clr) -{ - unsigned long tmp; - - /* we assume this code is running on a different cpu - * than the one that is changing coherency setting */ - spin_lock(&scu_lock); - tmp = readl(scu_base + 8); - tmp &= ~clr; - tmp |= set; - writel(tmp, scu_base + 8); - spin_unlock(&scu_lock); - -} - -static unsigned int __init emev2_get_core_count(void) -{ - if (!scu_base) { - scu_base = ioremap(EMEV2_SCU_BASE, PAGE_SIZE); - emev2_clock_init(); /* need ioremapped SMU */ - } - - WARN_ON_ONCE(!scu_base); - - return scu_base ? scu_get_core_count(scu_base) : 1; -} - -static int emev2_platform_cpu_kill(unsigned int cpu) -{ - return 0; /* not supported yet */ -} - -static int __maybe_unused emev2_cpu_kill(unsigned int cpu) -{ - int k; - - /* this function is running on another CPU than the offline target, - * here we need wait for shutdown code in platform_cpu_die() to - * finish before asking SoC-specific code to power off the CPU core. - */ - for (k = 0; k < 1000; k++) { - if (shmobile_cpu_is_dead(cpu)) - return emev2_platform_cpu_kill(cpu); - mdelay(1); - } - - return 0; -} - - -static void __cpuinit emev2_secondary_init(unsigned int cpu) -{ - gic_secondary_init(0); -} - static int __cpuinit emev2_boot_secondary(unsigned int cpu, struct task_struct *idle) { - cpu = cpu_logical_map(cpu); - - /* enable cache coherency */ - modify_scu_cpu_psr(0, 3 << (cpu * 8)); - - /* Tell ROM loader about our vector (in headsmp.S) */ - emev2_set_boot_vector(__pa(shmobile_secondary_vector)); - - arch_send_wakeup_ipi_mask(cpumask_of(cpu)); + arch_send_wakeup_ipi_mask(cpumask_of(cpu_logical_map(cpu))); return 0; } static void __init emev2_smp_prepare_cpus(unsigned int max_cpus) { - int cpu = cpu_logical_map(0); + scu_enable(shmobile_scu_base); - scu_enable(scu_base); + /* Tell ROM loader about our vector (in headsmp-scu.S) */ + emev2_set_boot_vector(__pa(shmobile_secondary_vector_scu)); - /* enable cache coherency on CPU0 */ - modify_scu_cpu_psr(0, 3 << (cpu * 8)); + /* enable cache coherency on booting CPU */ + scu_power_mode(shmobile_scu_base, SCU_PM_NORMAL); } static void __init emev2_smp_init_cpus(void) { - unsigned int ncores = emev2_get_core_count(); + unsigned int ncores; + + /* setup EMEV2 specific SCU base */ + shmobile_scu_base = ioremap(EMEV2_SCU_BASE, PAGE_SIZE); + emev2_clock_init(); /* need ioremapped SMU */ + + ncores = shmobile_scu_base ? scu_get_core_count(shmobile_scu_base) : 1; shmobile_smp_init_cpus(ncores); } @@ -124,11 +63,5 @@ static void __init emev2_smp_init_cpus(void) struct smp_operations emev2_smp_ops __initdata = { .smp_init_cpus = emev2_smp_init_cpus, .smp_prepare_cpus = emev2_smp_prepare_cpus, - .smp_secondary_init = emev2_secondary_init, .smp_boot_secondary = emev2_boot_secondary, -#ifdef CONFIG_HOTPLUG_CPU - .cpu_kill = emev2_cpu_kill, - .cpu_die = shmobile_cpu_die, - .cpu_disable = shmobile_cpu_disable, -#endif }; diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c index 3a4acf23edcf..a853bf182ed5 100644 --- a/arch/arm/mach-shmobile/smp-r8a7779.c +++ b/arch/arm/mach-shmobile/smp-r8a7779.c @@ -23,14 +23,15 @@ #include <linux/spinlock.h> #include <linux/io.h> #include <linux/delay.h> -#include <linux/irqchip/arm-gic.h> #include <mach/common.h> #include <mach/r8a7779.h> +#include <asm/cacheflush.h> #include <asm/smp_plat.h> #include <asm/smp_scu.h> #include <asm/smp_twd.h> #define AVECR IOMEM(0xfe700040) +#define R8A7779_SCU_BASE 0xf0000000 static struct r8a7779_pm_ch r8a7779_ch_cpu1 = { .chan_offs = 0x40, /* PWRSR0 .. PWRER0 */ @@ -56,44 +57,14 @@ static struct r8a7779_pm_ch *r8a7779_ch_cpu[4] = { [3] = &r8a7779_ch_cpu3, }; -static void __iomem *scu_base_addr(void) -{ - return (void __iomem *)0xf0000000; -} - -static DEFINE_SPINLOCK(scu_lock); -static unsigned long tmp; - #ifdef CONFIG_HAVE_ARM_TWD -static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, 0xf0000600, 29); - +static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, R8A7779_SCU_BASE + 0x600, 29); void __init r8a7779_register_twd(void) { twd_local_timer_register(&twd_local_timer); } #endif -static void modify_scu_cpu_psr(unsigned long set, unsigned long clr) -{ - void __iomem *scu_base = scu_base_addr(); - - spin_lock(&scu_lock); - tmp = __raw_readl(scu_base + 8); - tmp &= ~clr; - tmp |= set; - spin_unlock(&scu_lock); - - /* disable cache coherency after releasing the lock */ - __raw_writel(tmp, scu_base + 8); -} - -static unsigned int __init r8a7779_get_core_count(void) -{ - void __iomem *scu_base = scu_base_addr(); - - return scu_get_core_count(scu_base); -} - static int r8a7779_platform_cpu_kill(unsigned int cpu) { struct r8a7779_pm_ch *ch = NULL; @@ -101,9 +72,6 @@ static int r8a7779_platform_cpu_kill(unsigned int cpu) cpu = cpu_logical_map(cpu); - /* disable cache coherency */ - modify_scu_cpu_psr(3 << (cpu * 8), 0); - if (cpu < ARRAY_SIZE(r8a7779_ch_cpu)) ch = r8a7779_ch_cpu[cpu]; @@ -113,30 +81,6 @@ static int r8a7779_platform_cpu_kill(unsigned int cpu) return ret ? ret : 1; } -static int __maybe_unused r8a7779_cpu_kill(unsigned int cpu) -{ - int k; - - /* this function is running on another CPU than the offline target, - * here we need wait for shutdown code in platform_cpu_die() to - * finish before asking SoC-specific code to power off the CPU core. - */ - for (k = 0; k < 1000; k++) { - if (shmobile_cpu_is_dead(cpu)) - return r8a7779_platform_cpu_kill(cpu); - - mdelay(1); - } - - return 0; -} - - -static void __cpuinit r8a7779_secondary_init(unsigned int cpu) -{ - gic_secondary_init(0); -} - static int __cpuinit r8a7779_boot_secondary(unsigned int cpu, struct task_struct *idle) { struct r8a7779_pm_ch *ch = NULL; @@ -144,9 +88,6 @@ static int __cpuinit r8a7779_boot_secondary(unsigned int cpu, struct task_struct cpu = cpu_logical_map(cpu); - /* enable cache coherency */ - modify_scu_cpu_psr(0, 3 << (cpu * 8)); - if (cpu < ARRAY_SIZE(r8a7779_ch_cpu)) ch = r8a7779_ch_cpu[cpu]; @@ -158,15 +99,13 @@ static int __cpuinit r8a7779_boot_secondary(unsigned int cpu, struct task_struct static void __init r8a7779_smp_prepare_cpus(unsigned int max_cpus) { - int cpu = cpu_logical_map(0); - - scu_enable(scu_base_addr()); + scu_enable(shmobile_scu_base); - /* Map the reset vector (in headsmp.S) */ - __raw_writel(__pa(shmobile_secondary_vector), AVECR); + /* Map the reset vector (in headsmp-scu.S) */ + __raw_writel(__pa(shmobile_secondary_vector_scu), AVECR); - /* enable cache coherency on CPU0 */ - modify_scu_cpu_psr(0, 3 << (cpu * 8)); + /* enable cache coherency on booting CPU */ + scu_power_mode(shmobile_scu_base, SCU_PM_NORMAL); r8a7779_pm_init(); @@ -178,19 +117,68 @@ static void __init r8a7779_smp_prepare_cpus(unsigned int max_cpus) static void __init r8a7779_smp_init_cpus(void) { - unsigned int ncores = r8a7779_get_core_count(); + /* setup r8a7779 specific SCU base */ + shmobile_scu_base = IOMEM(R8A7779_SCU_BASE); + + shmobile_smp_init_cpus(scu_get_core_count(shmobile_scu_base)); +} + +#ifdef CONFIG_HOTPLUG_CPU +static int r8a7779_scu_psr_core_disabled(int cpu) +{ + unsigned long mask = 3 << (cpu * 8); + + if ((__raw_readl(shmobile_scu_base + 8) & mask) == mask) + return 1; + + return 0; +} + +static int r8a7779_cpu_kill(unsigned int cpu) +{ + int k; - shmobile_smp_init_cpus(ncores); + /* this function is running on another CPU than the offline target, + * here we need wait for shutdown code in platform_cpu_die() to + * finish before asking SoC-specific code to power off the CPU core. + */ + for (k = 0; k < 1000; k++) { + if (r8a7779_scu_psr_core_disabled(cpu)) + return r8a7779_platform_cpu_kill(cpu); + + mdelay(1); + } + + return 0; +} + +static void r8a7779_cpu_die(unsigned int cpu) +{ + dsb(); + flush_cache_all(); + + /* disable cache coherency */ + scu_power_mode(shmobile_scu_base, SCU_PM_POWEROFF); + + /* Endless loop until power off from r8a7779_cpu_kill() */ + while (1) + cpu_do_idle(); +} + +static int r8a7779_cpu_disable(unsigned int cpu) +{ + /* only CPU1->3 have power domains, do not allow hotplug of CPU0 */ + return cpu == 0 ? -EPERM : 0; } +#endif /* CONFIG_HOTPLUG_CPU */ struct smp_operations r8a7779_smp_ops __initdata = { .smp_init_cpus = r8a7779_smp_init_cpus, .smp_prepare_cpus = r8a7779_smp_prepare_cpus, - .smp_secondary_init = r8a7779_secondary_init, .smp_boot_secondary = r8a7779_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_kill = r8a7779_cpu_kill, - .cpu_die = shmobile_cpu_die, - .cpu_disable = shmobile_cpu_disable, + .cpu_die = r8a7779_cpu_die, + .cpu_disable = r8a7779_cpu_disable, #endif }; diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c index acb46a94ccdf..496592b6c763 100644 --- a/arch/arm/mach-shmobile/smp-sh73a0.c +++ b/arch/arm/mach-shmobile/smp-sh73a0.c @@ -23,7 +23,6 @@ #include <linux/spinlock.h> #include <linux/io.h> #include <linux/delay.h> -#include <linux/irqchip/arm-gic.h> #include <mach/common.h> #include <asm/cacheflush.h> #include <asm/smp_plat.h> @@ -39,31 +38,16 @@ #define PSTR_SHUTDOWN_MODE 3 -static void __iomem *scu_base_addr(void) -{ - return (void __iomem *)0xf0000000; -} +#define SH73A0_SCU_BASE 0xf0000000 #ifdef CONFIG_HAVE_ARM_TWD -static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, 0xf0000600, 29); +static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, SH73A0_SCU_BASE + 0x600, 29); void __init sh73a0_register_twd(void) { twd_local_timer_register(&twd_local_timer); } #endif -static unsigned int __init sh73a0_get_core_count(void) -{ - void __iomem *scu_base = scu_base_addr(); - - return scu_get_core_count(scu_base); -} - -static void __cpuinit sh73a0_secondary_init(unsigned int cpu) -{ - gic_secondary_init(0); -} - static int __cpuinit sh73a0_boot_secondary(unsigned int cpu, struct task_struct *idle) { cpu = cpu_logical_map(cpu); @@ -78,21 +62,22 @@ static int __cpuinit sh73a0_boot_secondary(unsigned int cpu, struct task_struct static void __init sh73a0_smp_prepare_cpus(unsigned int max_cpus) { - scu_enable(scu_base_addr()); + scu_enable(shmobile_scu_base); - /* Map the reset vector (in headsmp-sh73a0.S) */ + /* Map the reset vector (in headsmp-scu.S) */ __raw_writel(0, APARMBAREA); /* 4k */ - __raw_writel(__pa(sh73a0_secondary_vector), SBAR); + __raw_writel(__pa(shmobile_secondary_vector_scu), SBAR); /* enable cache coherency on booting CPU */ - scu_power_mode(scu_base_addr(), SCU_PM_NORMAL); + scu_power_mode(shmobile_scu_base, SCU_PM_NORMAL); } static void __init sh73a0_smp_init_cpus(void) { - unsigned int ncores = sh73a0_get_core_count(); + /* setup sh73a0 specific SCU base */ + shmobile_scu_base = IOMEM(SH73A0_SCU_BASE); - shmobile_smp_init_cpus(ncores); + shmobile_smp_init_cpus(scu_get_core_count(shmobile_scu_base)); } #ifdef CONFIG_HOTPLUG_CPU @@ -119,30 +104,26 @@ static int sh73a0_cpu_kill(unsigned int cpu) static void sh73a0_cpu_die(unsigned int cpu) { - /* - * The ARM MPcore does not issue a cache coherency request for the L1 - * cache when powering off single CPUs. We must take care of this and - * further caches. - */ - dsb(); - flush_cache_all(); - /* Set power off mode. This takes the CPU out of the MP cluster */ - scu_power_mode(scu_base_addr(), SCU_PM_POWEROFF); + scu_power_mode(shmobile_scu_base, SCU_PM_POWEROFF); /* Enter shutdown mode */ cpu_do_idle(); } + +static int sh73a0_cpu_disable(unsigned int cpu) +{ + return 0; /* CPU0 and CPU1 supported */ +} #endif /* CONFIG_HOTPLUG_CPU */ struct smp_operations sh73a0_smp_ops __initdata = { .smp_init_cpus = sh73a0_smp_init_cpus, .smp_prepare_cpus = sh73a0_smp_prepare_cpus, - .smp_secondary_init = sh73a0_secondary_init, .smp_boot_secondary = sh73a0_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_kill = sh73a0_cpu_kill, .cpu_die = sh73a0_cpu_die, - .cpu_disable = shmobile_cpu_disable_any, + .cpu_disable = sh73a0_cpu_disable, #endif }; diff --git a/arch/arm/mach-shmobile/suspend.c b/arch/arm/mach-shmobile/suspend.c index 47d83f7a70b6..5d92b5dd486b 100644 --- a/arch/arm/mach-shmobile/suspend.c +++ b/arch/arm/mach-shmobile/suspend.c @@ -12,6 +12,8 @@ #include <linux/suspend.h> #include <linux/module.h> #include <linux/err.h> +#include <linux/cpu.h> + #include <asm/io.h> #include <asm/system_misc.h> @@ -23,13 +25,13 @@ static int shmobile_suspend_default_enter(suspend_state_t suspend_state) static int shmobile_suspend_begin(suspend_state_t state) { - disable_hlt(); + cpu_idle_poll_ctrl(true); return 0; } static void shmobile_suspend_end(void) { - enable_hlt(); + cpu_idle_poll_ctrl(false); } struct platform_suspend_ops shmobile_suspend_ops = { diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c index 3d16d4dff01b..f321dbeb2379 100644 --- a/arch/arm/mach-shmobile/timer.c +++ b/arch/arm/mach-shmobile/timer.c @@ -19,10 +19,8 @@ * */ #include <linux/platform_device.h> +#include <linux/clocksource.h> #include <linux/delay.h> -#include <asm/arch_timer.h> -#include <asm/mach/time.h> -#include <asm/smp_twd.h> void __init shmobile_setup_delay(unsigned int max_cpu_core_mhz, unsigned int mult, unsigned int div) @@ -63,6 +61,5 @@ void __init shmobile_earlytimer_init(void) void __init shmobile_timer_init(void) { - arch_timer_of_register(); - arch_timer_sched_clock_init(); + clocksource_of_init(); } diff --git a/arch/arm/mach-socfpga/core.h b/arch/arm/mach-socfpga/core.h index 315edff610f2..572b8f719ffb 100644 --- a/arch/arm/mach-socfpga/core.h +++ b/arch/arm/mach-socfpga/core.h @@ -20,12 +20,23 @@ #ifndef __MACH_CORE_H #define __MACH_CORE_H +#define SOCFPGA_RSTMGR_CTRL 0x04 +#define SOCFPGA_RSTMGR_MODPERRST 0x14 +#define SOCFPGA_RSTMGR_BRGMODRST 0x1c + +/* System Manager bits */ +#define RSTMGR_CTRL_SWCOLDRSTREQ 0x1 /* Cold Reset */ +#define RSTMGR_CTRL_SWWARMRSTREQ 0x2 /* Warm Reset */ + extern void socfpga_secondary_startup(void); extern void __iomem *socfpga_scu_base_addr; extern void socfpga_init_clocks(void); extern void socfpga_sysmgr_init(void); +extern void __iomem *sys_manager_base_addr; +extern void __iomem *rst_manager_base_addr; + extern struct smp_operations socfpga_smp_ops; extern char secondary_trampoline, secondary_trampoline_end; diff --git a/arch/arm/mach-socfpga/platsmp.c b/arch/arm/mach-socfpga/platsmp.c index 84c60fa8daa0..b51ce8c7929d 100644 --- a/arch/arm/mach-socfpga/platsmp.c +++ b/arch/arm/mach-socfpga/platsmp.c @@ -22,7 +22,6 @@ #include <linux/io.h> #include <linux/of.h> #include <linux/of_address.h> -#include <linux/irqchip/arm-gic.h> #include <asm/cacheflush.h> #include <asm/smp_scu.h> @@ -30,19 +29,6 @@ #include "core.h" -extern void __iomem *sys_manager_base_addr; -extern void __iomem *rst_manager_base_addr; - -static void __cpuinit socfpga_secondary_init(unsigned int cpu) -{ - /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); -} - static int __cpuinit socfpga_boot_secondary(unsigned int cpu, struct task_struct *idle) { int trampoline_size = &secondary_trampoline_end - &secondary_trampoline; @@ -109,7 +95,6 @@ static void socfpga_cpu_die(unsigned int cpu) struct smp_operations socfpga_smp_ops __initdata = { .smp_init_cpus = socfpga_smp_init_cpus, .smp_prepare_cpus = socfpga_smp_prepare_cpus, - .smp_secondary_init = socfpga_secondary_init, .smp_boot_secondary = socfpga_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_die = socfpga_cpu_die, diff --git a/arch/arm/mach-socfpga/socfpga.c b/arch/arm/mach-socfpga/socfpga.c index 1042c023cf24..46a051359f02 100644 --- a/arch/arm/mach-socfpga/socfpga.c +++ b/arch/arm/mach-socfpga/socfpga.c @@ -15,6 +15,7 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include <linux/dw_apb_timer.h> +#include <linux/clk-provider.h> #include <linux/irqchip.h> #include <linux/of_address.h> #include <linux/of_irq.h> @@ -29,6 +30,7 @@ void __iomem *socfpga_scu_base_addr = ((void __iomem *)(SOCFPGA_SCU_VIRT_BASE)); void __iomem *sys_manager_base_addr; void __iomem *rst_manager_base_addr; +void __iomem *clk_mgr_base_addr; unsigned long cpu1start_addr; static struct map_desc scu_io_desc __initdata = { @@ -77,6 +79,9 @@ void __init socfpga_sysmgr_init(void) np = of_find_compatible_node(NULL, NULL, "altr,rst-mgr"); rst_manager_base_addr = of_iomap(np, 0); + + np = of_find_compatible_node(NULL, NULL, "altr,clk-mgr"); + clk_mgr_base_addr = of_iomap(np, 0); } static void __init socfpga_init_irq(void) @@ -87,13 +92,22 @@ static void __init socfpga_init_irq(void) static void socfpga_cyclone5_restart(char mode, const char *cmd) { - /* TODO: */ + u32 temp; + + temp = readl(rst_manager_base_addr + SOCFPGA_RSTMGR_CTRL); + + if (mode == 'h') + temp |= RSTMGR_CTRL_SWCOLDRSTREQ; + else + temp |= RSTMGR_CTRL_SWWARMRSTREQ; + writel(temp, rst_manager_base_addr + SOCFPGA_RSTMGR_CTRL); } static void __init socfpga_cyclone5_init(void) { l2x0_of_init(0, ~0UL); of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); + of_clk_init(NULL); socfpga_init_clocks(); } diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig new file mode 100644 index 000000000000..442917eedff3 --- /dev/null +++ b/arch/arm/mach-spear/Kconfig @@ -0,0 +1,105 @@ +# +# SPEAr Platform configuration file +# + +menuconfig PLAT_SPEAR + bool "ST SPEAr Family" if ARCH_MULTI_V7 || ARCH_MULTI_V5 + default PLAT_SPEAR_SINGLE + select ARCH_REQUIRE_GPIOLIB + select ARM_AMBA + select CLKDEV_LOOKUP + select CLKSRC_MMIO + select COMMON_CLK + select GENERIC_CLOCKEVENTS + select HAVE_CLK + +if PLAT_SPEAR + +config ARCH_SPEAR13XX + bool "ST SPEAr13xx" + depends on ARCH_MULTI_V7 || PLAT_SPEAR_SINGLE + select ARCH_HAS_CPUFREQ + select ARM_GIC + select CPU_V7 + select GPIO_SPEAR_SPICS + select HAVE_ARM_SCU if SMP + select HAVE_ARM_TWD if LOCAL_TIMERS + select HAVE_SMP + select MIGHT_HAVE_CACHE_L2X0 + select PINCTRL + select USE_OF + help + Supports for ARM's SPEAR13XX family + +if ARCH_SPEAR13XX + +config MACH_SPEAR1310 + bool "SPEAr1310 Machine support with Device Tree" + select PINCTRL_SPEAR1310 + help + Supports ST SPEAr1310 machine configured via the device-tree + +config MACH_SPEAR1340 + bool "SPEAr1340 Machine support with Device Tree" + select PINCTRL_SPEAR1340 + help + Supports ST SPEAr1340 machine configured via the device-tree + +endif #ARCH_SPEAR13XX + +config ARCH_SPEAR3XX + bool "ST SPEAr3xx" + depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE + depends on !ARCH_SPEAR13XX + select ARM_VIC + select CPU_ARM926T + select PINCTRL + select USE_OF + help + Supports for ARM's SPEAR3XX family + +if ARCH_SPEAR3XX + +config MACH_SPEAR300 + bool "SPEAr300 Machine support with Device Tree" + select PINCTRL_SPEAR300 + help + Supports ST SPEAr300 machine configured via the device-tree + +config MACH_SPEAR310 + bool "SPEAr310 Machine support with Device Tree" + select PINCTRL_SPEAR310 + help + Supports ST SPEAr310 machine configured via the device-tree + +config MACH_SPEAR320 + bool "SPEAr320 Machine support with Device Tree" + select PINCTRL_SPEAR320 + help + Supports ST SPEAr320 machine configured via the device-tree + +endif + +config ARCH_SPEAR6XX + bool "ST SPEAr6XX" + depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE + depends on !ARCH_SPEAR13XX + select ARM_VIC + select CPU_ARM926T + help + Supports for ARM's SPEAR6XX family + +config MACH_SPEAR600 + def_bool y + depends on ARCH_SPEAR6XX + select USE_OF + help + Supports ST SPEAr600 boards configured via the device-treesource "arch/arm/mach-spear6xx/Kconfig" + +config ARCH_SPEAR_AUTO + def_bool PLAT_SPEAR_SINGLE + depends on !ARCH_SPEAR13XX && !ARCH_SPEAR6XX + select ARCH_SPEAR3XX + +endif + diff --git a/arch/arm/mach-spear/Makefile b/arch/arm/mach-spear/Makefile new file mode 100644 index 000000000000..a946c19ab31a --- /dev/null +++ b/arch/arm/mach-spear/Makefile @@ -0,0 +1,26 @@ +# +# SPEAr Platform specific Makefile +# + +ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include + +# Common support +obj-y := restart.o time.o + +smp-$(CONFIG_SMP) += headsmp.o platsmp.o +smp-$(CONFIG_HOTPLUG_CPU) += hotplug.o + +obj-$(CONFIG_ARCH_SPEAR13XX) += spear13xx.o $(smp-y) +obj-$(CONFIG_MACH_SPEAR1310) += spear1310.o +obj-$(CONFIG_MACH_SPEAR1340) += spear1340.o + +obj-$(CONFIG_ARCH_SPEAR3XX) += spear3xx.o +obj-$(CONFIG_ARCH_SPEAR3XX) += pl080.o +obj-$(CONFIG_MACH_SPEAR300) += spear300.o +obj-$(CONFIG_MACH_SPEAR310) += spear310.o +obj-$(CONFIG_MACH_SPEAR320) += spear320.o + +obj-$(CONFIG_ARCH_SPEAR6XX) += spear6xx.o +obj-$(CONFIG_ARCH_SPEAR6XX) += pl080.o + +CFLAGS_hotplug.o += -march=armv7-a diff --git a/arch/arm/mach-spear13xx/Makefile.boot b/arch/arm/mach-spear/Makefile.boot index 4674a4c221db..4674a4c221db 100644 --- a/arch/arm/mach-spear13xx/Makefile.boot +++ b/arch/arm/mach-spear/Makefile.boot diff --git a/arch/arm/mach-spear13xx/include/mach/generic.h b/arch/arm/mach-spear/generic.h index 633e678e01a3..a9fd45362fee 100644 --- a/arch/arm/mach-spear13xx/include/mach/generic.h +++ b/arch/arm/mach-spear/generic.h @@ -1,9 +1,8 @@ /* - * arch/arm/mach-spear13xx/include/mach/generic.h + * spear machine family generic header file * - * spear13xx machine family generic header file - * - * Copyright (C) 2012 ST Microelectronics + * Copyright (C) 2009-2012 ST Microelectronics + * Rajeev Kumar <rajeev-dlh.kumar@st.com> * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public @@ -15,37 +14,41 @@ #define __MACH_GENERIC_H #include <linux/dmaengine.h> +#include <linux/amba/pl08x.h> +#include <linux/init.h> #include <asm/mach/time.h> -/* Add spear13xx structure declarations here */ extern void spear13xx_timer_init(void); +extern void spear3xx_timer_init(void); extern struct pl022_ssp_controller pl022_plat_data; -extern struct dw_dma_platform_data dmac_plat_data; -extern struct dw_dma_slave cf_dma_priv; -extern struct dw_dma_slave nand_read_dma_priv; -extern struct dw_dma_slave nand_write_dma_priv; +extern struct pl08x_platform_data pl080_plat_data; -/* Add spear13xx family function declarations here */ void __init spear_setup_of_timer(void); +void __init spear3xx_clk_init(void __iomem *misc_base, + void __iomem *soc_config_base); +void __init spear3xx_map_io(void); +void __init spear3xx_dt_init_irq(void); +void __init spear6xx_clk_init(void __iomem *misc_base); void __init spear13xx_map_io(void); void __init spear13xx_l2x0_init(void); -bool dw_dma_filter(struct dma_chan *chan, void *slave); + void spear_restart(char, const char *); + void spear13xx_secondary_startup(void); void __cpuinit spear13xx_cpu_die(unsigned int cpu); extern struct smp_operations spear13xx_smp_ops; #ifdef CONFIG_MACH_SPEAR1310 -void __init spear1310_clk_init(void); +void __init spear1310_clk_init(void __iomem *misc_base, void __iomem *ras_base); #else -static inline void spear1310_clk_init(void) {} +static inline void spear1310_clk_init(void __iomem *misc_base, void __iomem *ras_base) {} #endif #ifdef CONFIG_MACH_SPEAR1340 -void __init spear1340_clk_init(void); +void __init spear1340_clk_init(void __iomem *misc_base); #else -static inline void spear1340_clk_init(void) {} +static inline void spear1340_clk_init(void __iomem *misc_base) {} #endif #endif /* __MACH_GENERIC_H */ diff --git a/arch/arm/mach-spear13xx/headsmp.S b/arch/arm/mach-spear/headsmp.S index ed85473a047f..ed85473a047f 100644 --- a/arch/arm/mach-spear13xx/headsmp.S +++ b/arch/arm/mach-spear/headsmp.S diff --git a/arch/arm/mach-spear13xx/hotplug.c b/arch/arm/mach-spear/hotplug.c index a7d2dd11a4f2..d97749c642ce 100644 --- a/arch/arm/mach-spear13xx/hotplug.c +++ b/arch/arm/mach-spear/hotplug.c @@ -13,7 +13,6 @@ #include <linux/kernel.h> #include <linux/errno.h> #include <linux/smp.h> -#include <asm/cacheflush.h> #include <asm/cp15.h> #include <asm/smp_plat.h> @@ -21,7 +20,6 @@ static inline void cpu_enter_lowpower(void) { unsigned int v; - flush_cache_all(); asm volatile( " mcr p15, 0, %1, c7, c5, 0\n" " dsb\n" diff --git a/arch/arm/plat-spear/include/plat/debug-macro.S b/arch/arm/mach-spear/include/mach/debug-macro.S index 75b05ad0fbad..75b05ad0fbad 100644 --- a/arch/arm/plat-spear/include/plat/debug-macro.S +++ b/arch/arm/mach-spear/include/mach/debug-macro.S diff --git a/arch/arm/mach-spear6xx/include/mach/irqs.h b/arch/arm/mach-spear/include/mach/irqs.h index 37a5c411a866..92da0a8c6bce 100644 --- a/arch/arm/mach-spear6xx/include/mach/irqs.h +++ b/arch/arm/mach-spear/include/mach/irqs.h @@ -1,10 +1,9 @@ /* - * arch/arm/mach-spear6xx/include/mach/irqs.h + * IRQ helper macros for spear machine family * - * IRQ helper macros for SPEAr6xx machine family - * - * Copyright (C) 2009 ST Microelectronics - * Rajeev Kumar<rajeev-dlh.kumar@st.com> + * Copyright (C) 2009-2012 ST Microelectronics + * Rajeev Kumar <rajeev-dlh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any @@ -14,6 +13,11 @@ #ifndef __MACH_IRQS_H #define __MACH_IRQS_H +#ifdef CONFIG_ARCH_SPEAR3XX +#define NR_IRQS 256 +#endif + +#ifdef CONFIG_ARCH_SPEAR6XX /* IRQ definitions */ /* VIC 1 */ #define IRQ_VIC_END 64 @@ -21,5 +25,11 @@ /* GPIO pins virtual irqs */ #define VIRTUAL_IRQS 24 #define NR_IRQS (IRQ_VIC_END + VIRTUAL_IRQS) +#endif + +#ifdef CONFIG_ARCH_SPEAR13XX +#define IRQ_GIC_END 160 +#define NR_IRQS IRQ_GIC_END +#endif -#endif /* __MACH_IRQS_H */ +#endif /* __MACH_IRQS_H */ diff --git a/arch/arm/mach-spear3xx/include/mach/misc_regs.h b/arch/arm/mach-spear/include/mach/misc_regs.h index 6309bf68d6f8..935639ce59ba 100644 --- a/arch/arm/mach-spear3xx/include/mach/misc_regs.h +++ b/arch/arm/mach-spear/include/mach/misc_regs.h @@ -16,7 +16,7 @@ #include <mach/spear.h> -#define MISC_BASE IOMEM(VA_SPEAR3XX_ICM3_MISC_REG_BASE) +#define MISC_BASE (VA_SPEAR_ICM3_MISC_REG_BASE) #define DMA_CHN_CFG (MISC_BASE + 0x0A0) #endif /* __MACH_MISC_REGS_H */ diff --git a/arch/arm/mach-spear/include/mach/spear.h b/arch/arm/mach-spear/include/mach/spear.h new file mode 100644 index 000000000000..cf3a5369eeca --- /dev/null +++ b/arch/arm/mach-spear/include/mach/spear.h @@ -0,0 +1,93 @@ +/* + * SPEAr3xx/6xx Machine family specific definition + * + * Copyright (C) 2009,2012 ST Microelectronics + * Rajeev Kumar<rajeev-dlh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_SPEAR_H +#define __MACH_SPEAR_H + +#include <asm/memory.h> + +#if defined(CONFIG_ARCH_SPEAR3XX) || defined (CONFIG_ARCH_SPEAR6XX) + +/* ICM1 - Low speed connection */ +#define SPEAR_ICM1_2_BASE UL(0xD0000000) +#define VA_SPEAR_ICM1_2_BASE IOMEM(0xFD000000) +#define SPEAR_ICM1_UART_BASE UL(0xD0000000) +#define VA_SPEAR_ICM1_UART_BASE (VA_SPEAR_ICM1_2_BASE - SPEAR_ICM1_2_BASE + SPEAR_ICM1_UART_BASE) +#define SPEAR3XX_ICM1_SSP_BASE UL(0xD0100000) + +/* ML-1, 2 - Multi Layer CPU Subsystem */ +#define SPEAR_ICM3_ML1_2_BASE UL(0xF0000000) +#define VA_SPEAR6XX_ML_CPU_BASE IOMEM(0xF0000000) + +/* ICM3 - Basic Subsystem */ +#define SPEAR_ICM3_SMI_CTRL_BASE UL(0xFC000000) +#define VA_SPEAR_ICM3_SMI_CTRL_BASE IOMEM(0xFC000000) +#define SPEAR_ICM3_DMA_BASE UL(0xFC400000) +#define SPEAR_ICM3_SYS_CTRL_BASE UL(0xFCA00000) +#define VA_SPEAR_ICM3_SYS_CTRL_BASE (VA_SPEAR_ICM3_SMI_CTRL_BASE - SPEAR_ICM3_SMI_CTRL_BASE + SPEAR_ICM3_SYS_CTRL_BASE) +#define SPEAR_ICM3_MISC_REG_BASE UL(0xFCA80000) +#define VA_SPEAR_ICM3_MISC_REG_BASE (VA_SPEAR_ICM3_SMI_CTRL_BASE - SPEAR_ICM3_SMI_CTRL_BASE + SPEAR_ICM3_MISC_REG_BASE) + +/* Debug uart for linux, will be used for debug and uncompress messages */ +#define SPEAR_DBG_UART_BASE SPEAR_ICM1_UART_BASE +#define VA_SPEAR_DBG_UART_BASE VA_SPEAR_ICM1_UART_BASE + +/* Sysctl base for spear platform */ +#define SPEAR_SYS_CTRL_BASE SPEAR_ICM3_SYS_CTRL_BASE +#define VA_SPEAR_SYS_CTRL_BASE VA_SPEAR_ICM3_SYS_CTRL_BASE +#endif /* SPEAR3xx || SPEAR6XX */ + +/* SPEAr320 Macros */ +#define SPEAR320_SOC_CONFIG_BASE UL(0xB3000000) +#define VA_SPEAR320_SOC_CONFIG_BASE IOMEM(0xFE000000) + +#ifdef CONFIG_ARCH_SPEAR13XX + +#define PERIP_GRP2_BASE UL(0xB3000000) +#define VA_PERIP_GRP2_BASE IOMEM(0xFE000000) +#define MCIF_SDHCI_BASE UL(0xB3000000) +#define SYSRAM0_BASE UL(0xB3800000) +#define VA_SYSRAM0_BASE IOMEM(0xFE800000) +#define SYS_LOCATION (VA_SYSRAM0_BASE + 0x600) + +#define PERIP_GRP1_BASE UL(0xE0000000) +#define VA_PERIP_GRP1_BASE IOMEM(0xFD000000) +#define UART_BASE UL(0xE0000000) +#define VA_UART_BASE IOMEM(0xFD000000) +#define SSP_BASE UL(0xE0100000) +#define MISC_BASE UL(0xE0700000) +#define VA_MISC_BASE IOMEM(0xFD700000) + +#define A9SM_AND_MPMC_BASE UL(0xEC000000) +#define VA_A9SM_AND_MPMC_BASE IOMEM(0xFC000000) + +#define SPEAR1310_RAS_BASE UL(0xD8400000) +#define VA_SPEAR1310_RAS_BASE IOMEM(UL(0xFA400000)) + +/* A9SM peripheral offsets */ +#define A9SM_PERIP_BASE UL(0xEC800000) +#define VA_A9SM_PERIP_BASE IOMEM(0xFC800000) +#define VA_SCU_BASE (VA_A9SM_PERIP_BASE + 0x00) + +#define L2CC_BASE UL(0xED000000) +#define VA_L2CC_BASE IOMEM(UL(0xFB000000)) + +/* others */ +#define MCIF_CF_BASE UL(0xB2800000) + +/* Debug uart for linux, will be used for debug and uncompress messages */ +#define SPEAR_DBG_UART_BASE UART_BASE +#define VA_SPEAR_DBG_UART_BASE VA_UART_BASE + +#endif /* SPEAR13XX */ + +#endif /* __MACH_SPEAR_H */ diff --git a/arch/arm/plat-spear/include/plat/timex.h b/arch/arm/mach-spear/include/mach/timex.h index ef95e5b780bd..ef95e5b780bd 100644 --- a/arch/arm/plat-spear/include/plat/timex.h +++ b/arch/arm/mach-spear/include/mach/timex.h diff --git a/arch/arm/plat-spear/include/plat/uncompress.h b/arch/arm/mach-spear/include/mach/uncompress.h index 51b2dc93e4da..51b2dc93e4da 100644 --- a/arch/arm/plat-spear/include/plat/uncompress.h +++ b/arch/arm/mach-spear/include/mach/uncompress.h diff --git a/arch/arm/plat-spear/pl080.c b/arch/arm/mach-spear/pl080.c index cfa1199d0f4a..cfa1199d0f4a 100644 --- a/arch/arm/plat-spear/pl080.c +++ b/arch/arm/mach-spear/pl080.c diff --git a/arch/arm/plat-spear/include/plat/pl080.h b/arch/arm/mach-spear/pl080.h index eb6590ded40d..eb6590ded40d 100644 --- a/arch/arm/plat-spear/include/plat/pl080.h +++ b/arch/arm/mach-spear/pl080.h diff --git a/arch/arm/mach-spear13xx/platsmp.c b/arch/arm/mach-spear/platsmp.c index af4ade61cd95..9c4c722c954e 100644 --- a/arch/arm/mach-spear13xx/platsmp.c +++ b/arch/arm/mach-spear/platsmp.c @@ -15,11 +15,10 @@ #include <linux/jiffies.h> #include <linux/io.h> #include <linux/smp.h> -#include <linux/irqchip/arm-gic.h> #include <asm/cacheflush.h> #include <asm/smp_scu.h> #include <mach/spear.h> -#include <mach/generic.h> +#include "generic.h" static DEFINE_SPINLOCK(boot_lock); @@ -28,13 +27,6 @@ static void __iomem *scu_base = IOMEM(VA_SCU_BASE); static void __cpuinit spear13xx_secondary_init(unsigned int cpu) { /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); - - /* * let the primary processor know we're out of the * pen, then head off into the C entry point */ diff --git a/arch/arm/plat-spear/restart.c b/arch/arm/mach-spear/restart.c index 7d4616d5df11..2b44500bb718 100644 --- a/arch/arm/plat-spear/restart.c +++ b/arch/arm/mach-spear/restart.c @@ -14,7 +14,7 @@ #include <linux/amba/sp810.h> #include <asm/system_misc.h> #include <mach/spear.h> -#include <mach/generic.h> +#include "generic.h" #define SPEAR13XX_SYS_SW_RES (VA_MISC_BASE + 0x204) void spear_restart(char mode, const char *cmd) @@ -26,7 +26,8 @@ void spear_restart(char mode, const char *cmd) /* hardware reset, Use on-chip reset capability */ #ifdef CONFIG_ARCH_SPEAR13XX writel_relaxed(0x01, SPEAR13XX_SYS_SW_RES); -#else +#endif +#if defined(CONFIG_ARCH_SPEAR3XX) || defined(CONFIG_ARCH_SPEAR6XX) sysctl_soft_reset((void __iomem *)VA_SPEAR_SYS_CTRL_BASE); #endif } diff --git a/arch/arm/mach-spear13xx/spear1310.c b/arch/arm/mach-spear/spear1310.c index 56214d1076ef..9eaac2c881ea 100644 --- a/arch/arm/mach-spear13xx/spear1310.c +++ b/arch/arm/mach-spear/spear1310.c @@ -19,46 +19,16 @@ #include <linux/pata_arasan_cf_data.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/generic.h> +#include "generic.h" #include <mach/spear.h> /* Base addresses */ -#define SPEAR1310_SSP1_BASE UL(0x5D400000) -#define SPEAR1310_SATA0_BASE UL(0xB1000000) -#define SPEAR1310_SATA1_BASE UL(0xB1800000) -#define SPEAR1310_SATA2_BASE UL(0xB4000000) - #define SPEAR1310_RAS_GRP1_BASE UL(0xD8000000) #define VA_SPEAR1310_RAS_GRP1_BASE UL(0xFA000000) -#define SPEAR1310_RAS_BASE UL(0xD8400000) -#define VA_SPEAR1310_RAS_BASE IOMEM(UL(0xFA400000)) - -static struct arasan_cf_pdata cf_pdata = { - .cf_if_clk = CF_IF_CLK_166M, - .quirk = CF_BROKEN_UDMA, - .dma_priv = &cf_dma_priv, -}; - -/* ssp device registration */ -static struct pl022_ssp_controller ssp1_plat_data = { - .enable_dma = 0, -}; - -/* Add SPEAr1310 auxdata to pass platform data */ -static struct of_dev_auxdata spear1310_auxdata_lookup[] __initdata = { - OF_DEV_AUXDATA("arasan,cf-spear1340", MCIF_CF_BASE, NULL, &cf_pdata), - OF_DEV_AUXDATA("snps,dma-spear1340", DMAC0_BASE, NULL, &dmac_plat_data), - OF_DEV_AUXDATA("snps,dma-spear1340", DMAC1_BASE, NULL, &dmac_plat_data), - OF_DEV_AUXDATA("arm,pl022", SSP_BASE, NULL, &pl022_plat_data), - - OF_DEV_AUXDATA("arm,pl022", SPEAR1310_SSP1_BASE, NULL, &ssp1_plat_data), - {} -}; static void __init spear1310_dt_init(void) { - of_platform_populate(NULL, of_default_bus_match_table, - spear1310_auxdata_lookup, NULL); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } static const char * const spear1310_dt_board_compat[] = { diff --git a/arch/arm/mach-spear13xx/spear1340.c b/arch/arm/mach-spear/spear1340.c index 9a28beb2a113..a04a7fe76f71 100644 --- a/arch/arm/mach-spear13xx/spear1340.c +++ b/arch/arm/mach-spear/spear1340.c @@ -16,17 +16,16 @@ #include <linux/ahci_platform.h> #include <linux/amba/serial.h> #include <linux/delay.h> -#include <linux/dw_dmac.h> #include <linux/of_platform.h> #include <linux/irqchip.h> #include <asm/mach/arch.h> -#include <mach/dma.h> -#include <mach/generic.h> +#include "generic.h" #include <mach/spear.h> +/* FIXME: Move SATA PHY code into a standalone driver */ + /* Base addresses */ #define SPEAR1340_SATA_BASE UL(0xB1000000) -#define SPEAR1340_UART1_BASE UL(0xB4100000) /* Power Management Registers */ #define SPEAR1340_PCM_CFG (VA_MISC_BASE + 0x100) @@ -78,28 +77,6 @@ (SPEAR1340_MIPHY_OSC_BYPASS_EXT | \ SPEAR1340_MIPHY_PLL_RATIO_TOP(25)) -static struct dw_dma_slave uart1_dma_param[] = { - { - /* Tx */ - .cfg_hi = DWC_CFGH_DST_PER(SPEAR1340_DMA_REQ_UART1_TX), - .cfg_lo = 0, - .src_master = DMA_MASTER_MEMORY, - .dst_master = SPEAR1340_DMA_MASTER_UART1, - }, { - /* Rx */ - .cfg_hi = DWC_CFGH_SRC_PER(SPEAR1340_DMA_REQ_UART1_RX), - .cfg_lo = 0, - .src_master = SPEAR1340_DMA_MASTER_UART1, - .dst_master = DMA_MASTER_MEMORY, - } -}; - -static struct amba_pl011_data uart1_data = { - .dma_filter = dw_dma_filter, - .dma_tx_param = &uart1_dma_param[0], - .dma_rx_param = &uart1_dma_param[1], -}; - /* SATA device registration */ static int sata_miphy_init(struct device *dev, void __iomem *addr) { @@ -158,14 +135,8 @@ static struct ahci_platform_data sata_pdata = { /* Add SPEAr1340 auxdata to pass platform data */ static struct of_dev_auxdata spear1340_auxdata_lookup[] __initdata = { - OF_DEV_AUXDATA("arasan,cf-spear1340", MCIF_CF_BASE, NULL, &cf_dma_priv), - OF_DEV_AUXDATA("snps,dma-spear1340", DMAC0_BASE, NULL, &dmac_plat_data), - OF_DEV_AUXDATA("snps,dma-spear1340", DMAC1_BASE, NULL, &dmac_plat_data), - OF_DEV_AUXDATA("arm,pl022", SSP_BASE, NULL, &pl022_plat_data), - OF_DEV_AUXDATA("snps,spear-ahci", SPEAR1340_SATA_BASE, NULL, &sata_pdata), - OF_DEV_AUXDATA("arm,pl011", SPEAR1340_UART1_BASE, NULL, &uart1_data), {} }; diff --git a/arch/arm/mach-spear13xx/spear13xx.c b/arch/arm/mach-spear/spear13xx.c index c7d2b4a8d8cc..3621599c38ad 100644 --- a/arch/arm/mach-spear13xx/spear13xx.c +++ b/arch/arm/mach-spear/spear13xx.c @@ -15,70 +15,13 @@ #include <linux/amba/pl022.h> #include <linux/clk.h> -#include <linux/dw_dmac.h> +#include <linux/clocksource.h> #include <linux/err.h> #include <linux/of.h> #include <asm/hardware/cache-l2x0.h> #include <asm/mach/map.h> -#include <asm/smp_twd.h> -#include <mach/dma.h> -#include <mach/generic.h> #include <mach/spear.h> - -/* common dw_dma filter routine to be used by peripherals */ -bool dw_dma_filter(struct dma_chan *chan, void *slave) -{ - struct dw_dma_slave *dws = (struct dw_dma_slave *)slave; - - if (chan->device->dev == dws->dma_dev) { - chan->private = slave; - return true; - } else { - return false; - } -} - -/* ssp device registration */ -static struct dw_dma_slave ssp_dma_param[] = { - { - /* Tx */ - .cfg_hi = DWC_CFGH_DST_PER(DMA_REQ_SSP0_TX), - .cfg_lo = 0, - .src_master = DMA_MASTER_MEMORY, - .dst_master = DMA_MASTER_SSP0, - }, { - /* Rx */ - .cfg_hi = DWC_CFGH_SRC_PER(DMA_REQ_SSP0_RX), - .cfg_lo = 0, - .src_master = DMA_MASTER_SSP0, - .dst_master = DMA_MASTER_MEMORY, - } -}; - -struct pl022_ssp_controller pl022_plat_data = { - .enable_dma = 1, - .dma_filter = dw_dma_filter, - .dma_rx_param = &ssp_dma_param[1], - .dma_tx_param = &ssp_dma_param[0], -}; - -/* CF device registration */ -struct dw_dma_slave cf_dma_priv = { - .cfg_hi = 0, - .cfg_lo = 0, - .src_master = 0, - .dst_master = 0, -}; - -/* dmac device registeration */ -struct dw_dma_platform_data dmac_plat_data = { - .nr_channels = 8, - .chan_allocation_order = CHAN_ALLOCATION_DESCENDING, - .chan_priority = CHAN_PRIORITY_DESCENDING, - .block_size = 4095U, - .nr_masters = 2, - .data_width = { 3, 3, 0, 0 }, -}; +#include "generic.h" void __init spear13xx_l2x0_init(void) { @@ -145,9 +88,9 @@ void __init spear13xx_map_io(void) static void __init spear13xx_clk_init(void) { if (of_machine_is_compatible("st,spear1310")) - spear1310_clk_init(); + spear1310_clk_init(VA_MISC_BASE, VA_SPEAR1310_RAS_BASE); else if (of_machine_is_compatible("st,spear1340")) - spear1340_clk_init(); + spear1340_clk_init(VA_MISC_BASE); else pr_err("%s: Unknown machine\n", __func__); } @@ -179,5 +122,5 @@ void __init spear13xx_timer_init(void) clk_put(pclk); spear_setup_of_timer(); - twd_local_timer_of_register(); + clocksource_of_init(); } diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear/spear300.c index bbc9b7e9c62c..bac56e845f7a 100644 --- a/arch/arm/mach-spear3xx/spear300.c +++ b/arch/arm/mach-spear/spear300.c @@ -17,7 +17,7 @@ #include <linux/irqchip.h> #include <linux/of_platform.h> #include <asm/mach/arch.h> -#include <mach/generic.h> +#include "generic.h" #include <mach/spear.h> /* DMAC platform data's slave info */ @@ -185,7 +185,7 @@ struct pl08x_channel_data spear300_dma_info[] = { static struct of_dev_auxdata spear300_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("arm,pl022", SPEAR3XX_ICM1_SSP_BASE, NULL, &pl022_plat_data), - OF_DEV_AUXDATA("arm,pl080", SPEAR3XX_ICM3_DMA_BASE, NULL, + OF_DEV_AUXDATA("arm,pl080", SPEAR_ICM3_DMA_BASE, NULL, &pl080_plat_data), {} }; diff --git a/arch/arm/mach-spear3xx/spear310.c b/arch/arm/mach-spear/spear310.c index c13a434a8195..6ffbc63d516d 100644 --- a/arch/arm/mach-spear3xx/spear310.c +++ b/arch/arm/mach-spear/spear310.c @@ -18,7 +18,7 @@ #include <linux/irqchip.h> #include <linux/of_platform.h> #include <asm/mach/arch.h> -#include <mach/generic.h> +#include "generic.h" #include <mach/spear.h> #define SPEAR310_UART1_BASE UL(0xB2000000) @@ -217,7 +217,7 @@ static struct amba_pl011_data spear310_uart_data[] = { static struct of_dev_auxdata spear310_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("arm,pl022", SPEAR3XX_ICM1_SSP_BASE, NULL, &pl022_plat_data), - OF_DEV_AUXDATA("arm,pl080", SPEAR3XX_ICM3_DMA_BASE, NULL, + OF_DEV_AUXDATA("arm,pl080", SPEAR_ICM3_DMA_BASE, NULL, &pl080_plat_data), OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART1_BASE, NULL, &spear310_uart_data[0]), diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear/spear320.c index e1c77079a3e5..6eb3eec65f96 100644 --- a/arch/arm/mach-spear3xx/spear320.c +++ b/arch/arm/mach-spear/spear320.c @@ -19,7 +19,8 @@ #include <linux/irqchip.h> #include <linux/of_platform.h> #include <asm/mach/arch.h> -#include <mach/generic.h> +#include <asm/mach/map.h> +#include "generic.h" #include <mach/spear.h> #define SPEAR320_UART1_BASE UL(0xA3000000) @@ -222,7 +223,7 @@ static struct amba_pl011_data spear320_uart_data[] = { static struct of_dev_auxdata spear320_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("arm,pl022", SPEAR3XX_ICM1_SSP_BASE, NULL, &pl022_plat_data), - OF_DEV_AUXDATA("arm,pl080", SPEAR3XX_ICM3_DMA_BASE, NULL, + OF_DEV_AUXDATA("arm,pl080", SPEAR_ICM3_DMA_BASE, NULL, &pl080_plat_data), OF_DEV_AUXDATA("arm,pl022", SPEAR320_SSP0_BASE, NULL, &spear320_ssp_data[0]), @@ -253,7 +254,7 @@ static const char * const spear320_dt_board_compat[] = { struct map_desc spear320_io_desc[] __initdata = { { - .virtual = VA_SPEAR320_SOC_CONFIG_BASE, + .virtual = (unsigned long)VA_SPEAR320_SOC_CONFIG_BASE, .pfn = __phys_to_pfn(SPEAR320_SOC_CONFIG_BASE), .length = SZ_16M, .type = MT_DEVICE diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear/spear3xx.c index d2b3937c4014..0227c97797cd 100644 --- a/arch/arm/mach-spear3xx/spear3xx.c +++ b/arch/arm/mach-spear/spear3xx.c @@ -15,10 +15,13 @@ #include <linux/amba/pl022.h> #include <linux/amba/pl080.h> +#include <linux/clk.h> #include <linux/io.h> -#include <plat/pl080.h> -#include <mach/generic.h> +#include <asm/mach/map.h> +#include "pl080.h" +#include "generic.h" #include <mach/spear.h> +#include <mach/misc_regs.h> /* ssp device registration */ struct pl022_ssp_controller pl022_plat_data = { @@ -65,13 +68,13 @@ struct pl08x_platform_data pl080_plat_data = { */ struct map_desc spear3xx_io_desc[] __initdata = { { - .virtual = VA_SPEAR3XX_ICM1_2_BASE, - .pfn = __phys_to_pfn(SPEAR3XX_ICM1_2_BASE), + .virtual = (unsigned long)VA_SPEAR_ICM1_2_BASE, + .pfn = __phys_to_pfn(SPEAR_ICM1_2_BASE), .length = SZ_16M, .type = MT_DEVICE }, { - .virtual = VA_SPEAR3XX_ICM3_SMI_CTRL_BASE, - .pfn = __phys_to_pfn(SPEAR3XX_ICM3_SMI_CTRL_BASE), + .virtual = (unsigned long)VA_SPEAR_ICM3_SMI_CTRL_BASE, + .pfn = __phys_to_pfn(SPEAR_ICM3_SMI_CTRL_BASE), .length = SZ_16M, .type = MT_DEVICE }, @@ -88,7 +91,7 @@ void __init spear3xx_timer_init(void) char pclk_name[] = "pll3_clk"; struct clk *gpt_clk, *pclk; - spear3xx_clk_init(); + spear3xx_clk_init(MISC_BASE, VA_SPEAR320_SOC_CONFIG_BASE); /* get the system timer clock */ gpt_clk = clk_get_sys("gpt0", NULL); diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear/spear6xx.c index 8904d8a52d84..ec8eefbbdfad 100644 --- a/arch/arm/mach-spear6xx/spear6xx.c +++ b/arch/arm/mach-spear/spear6xx.c @@ -24,9 +24,10 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/mach/map.h> -#include <plat/pl080.h> -#include <mach/generic.h> +#include "pl080.h" +#include "generic.h" #include <mach/spear.h> +#include <mach/misc_regs.h> /* dmac device registration */ static struct pl08x_channel_data spear600_dma_info[] = { @@ -321,7 +322,7 @@ static struct pl08x_channel_data spear600_dma_info[] = { }, }; -struct pl08x_platform_data pl080_plat_data = { +static struct pl08x_platform_data spear6xx_pl080_plat_data = { .memcpy_channel = { .bus_id = "memcpy", .cctl_memcpy = @@ -350,18 +351,18 @@ struct pl08x_platform_data pl080_plat_data = { */ struct map_desc spear6xx_io_desc[] __initdata = { { - .virtual = VA_SPEAR6XX_ML_CPU_BASE, - .pfn = __phys_to_pfn(SPEAR6XX_ML_CPU_BASE), + .virtual = (unsigned long)VA_SPEAR6XX_ML_CPU_BASE, + .pfn = __phys_to_pfn(SPEAR_ICM3_ML1_2_BASE), .length = 2 * SZ_16M, .type = MT_DEVICE }, { - .virtual = VA_SPEAR6XX_ICM1_BASE, - .pfn = __phys_to_pfn(SPEAR6XX_ICM1_BASE), + .virtual = (unsigned long)VA_SPEAR_ICM1_2_BASE, + .pfn = __phys_to_pfn(SPEAR_ICM1_2_BASE), .length = SZ_16M, .type = MT_DEVICE }, { - .virtual = VA_SPEAR6XX_ICM3_SMI_CTRL_BASE, - .pfn = __phys_to_pfn(SPEAR6XX_ICM3_SMI_CTRL_BASE), + .virtual = (unsigned long)VA_SPEAR_ICM3_SMI_CTRL_BASE, + .pfn = __phys_to_pfn(SPEAR_ICM3_SMI_CTRL_BASE), .length = SZ_16M, .type = MT_DEVICE }, @@ -378,7 +379,7 @@ void __init spear6xx_timer_init(void) char pclk_name[] = "pll3_clk"; struct clk *gpt_clk, *pclk; - spear6xx_clk_init(); + spear6xx_clk_init(MISC_BASE); /* get the system timer clock */ gpt_clk = clk_get_sys("gpt0", NULL); @@ -404,8 +405,8 @@ void __init spear6xx_timer_init(void) /* Add auxdata to pass platform data */ struct of_dev_auxdata spear6xx_auxdata_lookup[] __initdata = { - OF_DEV_AUXDATA("arm,pl080", SPEAR6XX_ICM3_DMA_BASE, NULL, - &pl080_plat_data), + OF_DEV_AUXDATA("arm,pl080", SPEAR_ICM3_DMA_BASE, NULL, + &spear6xx_pl080_plat_data), {} }; diff --git a/arch/arm/plat-spear/time.c b/arch/arm/mach-spear/time.c index bd5c53cd6962..d449673e40f7 100644 --- a/arch/arm/plat-spear/time.c +++ b/arch/arm/mach-spear/time.c @@ -23,7 +23,7 @@ #include <linux/time.h> #include <linux/irq.h> #include <asm/mach/time.h> -#include <mach/generic.h> +#include "generic.h" /* * We would use TIMER0 and TIMER1 as clockevent and clocksource. diff --git a/arch/arm/mach-spear13xx/Kconfig b/arch/arm/mach-spear13xx/Kconfig deleted file mode 100644 index eaadc66d96b3..000000000000 --- a/arch/arm/mach-spear13xx/Kconfig +++ /dev/null @@ -1,20 +0,0 @@ -# -# SPEAr13XX Machine configuration file -# - -if ARCH_SPEAR13XX - -menu "SPEAr13xx Implementations" -config MACH_SPEAR1310 - bool "SPEAr1310 Machine support with Device Tree" - select PINCTRL_SPEAR1310 - help - Supports ST SPEAr1310 machine configured via the device-tree - -config MACH_SPEAR1340 - bool "SPEAr1340 Machine support with Device Tree" - select PINCTRL_SPEAR1340 - help - Supports ST SPEAr1340 machine configured via the device-tree -endmenu -endif #ARCH_SPEAR13XX diff --git a/arch/arm/mach-spear13xx/Makefile b/arch/arm/mach-spear13xx/Makefile deleted file mode 100644 index 3435ea78c15d..000000000000 --- a/arch/arm/mach-spear13xx/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -# -# Makefile for SPEAr13XX machine series -# - -obj-$(CONFIG_SMP) += headsmp.o platsmp.o -obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o - -obj-$(CONFIG_ARCH_SPEAR13XX) += spear13xx.o -obj-$(CONFIG_MACH_SPEAR1310) += spear1310.o -obj-$(CONFIG_MACH_SPEAR1340) += spear1340.o diff --git a/arch/arm/mach-spear13xx/include/mach/debug-macro.S b/arch/arm/mach-spear13xx/include/mach/debug-macro.S deleted file mode 100644 index 9e3ae6bfe50d..000000000000 --- a/arch/arm/mach-spear13xx/include/mach/debug-macro.S +++ /dev/null @@ -1,14 +0,0 @@ -/* - * arch/arm/mach-spear13xx/include/mach/debug-macro.S - * - * Debugging macro include header spear13xx machine family - * - * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.linux@gmail.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <plat/debug-macro.S> diff --git a/arch/arm/mach-spear13xx/include/mach/dma.h b/arch/arm/mach-spear13xx/include/mach/dma.h deleted file mode 100644 index d50bdb605925..000000000000 --- a/arch/arm/mach-spear13xx/include/mach/dma.h +++ /dev/null @@ -1,128 +0,0 @@ -/* - * arch/arm/mach-spear13xx/include/mach/dma.h - * - * DMA information for SPEAr13xx machine family - * - * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.linux@gmail.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __MACH_DMA_H -#define __MACH_DMA_H - -/* request id of all the peripherals */ -enum dma_master_info { - /* Accessible from only one master */ - DMA_MASTER_MCIF = 0, - DMA_MASTER_FSMC = 1, - /* Accessible from both 0 & 1 */ - DMA_MASTER_MEMORY = 0, - DMA_MASTER_ADC = 0, - DMA_MASTER_UART0 = 0, - DMA_MASTER_SSP0 = 0, - DMA_MASTER_I2C0 = 0, - -#ifdef CONFIG_MACH_SPEAR1310 - /* Accessible from only one master */ - SPEAR1310_DMA_MASTER_JPEG = 1, - - /* Accessible from both 0 & 1 */ - SPEAR1310_DMA_MASTER_I2S = 0, - SPEAR1310_DMA_MASTER_UART1 = 0, - SPEAR1310_DMA_MASTER_UART2 = 0, - SPEAR1310_DMA_MASTER_UART3 = 0, - SPEAR1310_DMA_MASTER_UART4 = 0, - SPEAR1310_DMA_MASTER_UART5 = 0, - SPEAR1310_DMA_MASTER_I2C1 = 0, - SPEAR1310_DMA_MASTER_I2C2 = 0, - SPEAR1310_DMA_MASTER_I2C3 = 0, - SPEAR1310_DMA_MASTER_I2C4 = 0, - SPEAR1310_DMA_MASTER_I2C5 = 0, - SPEAR1310_DMA_MASTER_I2C6 = 0, - SPEAR1310_DMA_MASTER_I2C7 = 0, - SPEAR1310_DMA_MASTER_SSP1 = 0, -#endif - -#ifdef CONFIG_MACH_SPEAR1340 - /* Accessible from only one master */ - SPEAR1340_DMA_MASTER_I2S_PLAY = 1, - SPEAR1340_DMA_MASTER_I2S_REC = 1, - SPEAR1340_DMA_MASTER_I2C1 = 1, - SPEAR1340_DMA_MASTER_UART1 = 1, - - /* following are accessible from both master 0 & 1 */ - SPEAR1340_DMA_MASTER_SPDIF = 0, - SPEAR1340_DMA_MASTER_CAM = 1, - SPEAR1340_DMA_MASTER_VIDEO_IN = 0, - SPEAR1340_DMA_MASTER_MALI = 0, -#endif -}; - -enum request_id { - DMA_REQ_ADC = 0, - DMA_REQ_SSP0_TX = 4, - DMA_REQ_SSP0_RX = 5, - DMA_REQ_UART0_TX = 6, - DMA_REQ_UART0_RX = 7, - DMA_REQ_I2C0_TX = 8, - DMA_REQ_I2C0_RX = 9, - -#ifdef CONFIG_MACH_SPEAR1310 - SPEAR1310_DMA_REQ_FROM_JPEG = 2, - SPEAR1310_DMA_REQ_TO_JPEG = 3, - SPEAR1310_DMA_REQ_I2S_TX = 10, - SPEAR1310_DMA_REQ_I2S_RX = 11, - - SPEAR1310_DMA_REQ_I2C1_RX = 0, - SPEAR1310_DMA_REQ_I2C1_TX = 1, - SPEAR1310_DMA_REQ_I2C2_RX = 2, - SPEAR1310_DMA_REQ_I2C2_TX = 3, - SPEAR1310_DMA_REQ_I2C3_RX = 4, - SPEAR1310_DMA_REQ_I2C3_TX = 5, - SPEAR1310_DMA_REQ_I2C4_RX = 6, - SPEAR1310_DMA_REQ_I2C4_TX = 7, - SPEAR1310_DMA_REQ_I2C5_RX = 8, - SPEAR1310_DMA_REQ_I2C5_TX = 9, - SPEAR1310_DMA_REQ_I2C6_RX = 10, - SPEAR1310_DMA_REQ_I2C6_TX = 11, - SPEAR1310_DMA_REQ_UART1_RX = 12, - SPEAR1310_DMA_REQ_UART1_TX = 13, - SPEAR1310_DMA_REQ_UART2_RX = 14, - SPEAR1310_DMA_REQ_UART2_TX = 15, - SPEAR1310_DMA_REQ_UART5_RX = 16, - SPEAR1310_DMA_REQ_UART5_TX = 17, - SPEAR1310_DMA_REQ_SSP1_RX = 18, - SPEAR1310_DMA_REQ_SSP1_TX = 19, - SPEAR1310_DMA_REQ_I2C7_RX = 20, - SPEAR1310_DMA_REQ_I2C7_TX = 21, - SPEAR1310_DMA_REQ_UART3_RX = 28, - SPEAR1310_DMA_REQ_UART3_TX = 29, - SPEAR1310_DMA_REQ_UART4_RX = 30, - SPEAR1310_DMA_REQ_UART4_TX = 31, -#endif - -#ifdef CONFIG_MACH_SPEAR1340 - SPEAR1340_DMA_REQ_SPDIF_TX = 2, - SPEAR1340_DMA_REQ_SPDIF_RX = 3, - SPEAR1340_DMA_REQ_I2S_TX = 10, - SPEAR1340_DMA_REQ_I2S_RX = 11, - SPEAR1340_DMA_REQ_UART1_TX = 12, - SPEAR1340_DMA_REQ_UART1_RX = 13, - SPEAR1340_DMA_REQ_I2C1_TX = 14, - SPEAR1340_DMA_REQ_I2C1_RX = 15, - SPEAR1340_DMA_REQ_CAM0_EVEN = 0, - SPEAR1340_DMA_REQ_CAM0_ODD = 1, - SPEAR1340_DMA_REQ_CAM1_EVEN = 2, - SPEAR1340_DMA_REQ_CAM1_ODD = 3, - SPEAR1340_DMA_REQ_CAM2_EVEN = 4, - SPEAR1340_DMA_REQ_CAM2_ODD = 5, - SPEAR1340_DMA_REQ_CAM3_EVEN = 6, - SPEAR1340_DMA_REQ_CAM3_ODD = 7, -#endif -}; - -#endif /* __MACH_DMA_H */ diff --git a/arch/arm/mach-spear13xx/include/mach/hardware.h b/arch/arm/mach-spear13xx/include/mach/hardware.h deleted file mode 100644 index 40a8c178f10d..000000000000 --- a/arch/arm/mach-spear13xx/include/mach/hardware.h +++ /dev/null @@ -1 +0,0 @@ -/* empty */ diff --git a/arch/arm/mach-spear13xx/include/mach/irqs.h b/arch/arm/mach-spear13xx/include/mach/irqs.h deleted file mode 100644 index 271a62b4cd31..000000000000 --- a/arch/arm/mach-spear13xx/include/mach/irqs.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * arch/arm/mach-spear13xx/include/mach/irqs.h - * - * IRQ helper macros for spear13xx machine family - * - * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.linux@gmail.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __MACH_IRQS_H -#define __MACH_IRQS_H - -#define IRQ_GIC_END 160 -#define NR_IRQS IRQ_GIC_END - -#endif /* __MACH_IRQS_H */ diff --git a/arch/arm/mach-spear13xx/include/mach/spear.h b/arch/arm/mach-spear13xx/include/mach/spear.h deleted file mode 100644 index 7cfa6818865a..000000000000 --- a/arch/arm/mach-spear13xx/include/mach/spear.h +++ /dev/null @@ -1,54 +0,0 @@ -/* - * arch/arm/mach-spear13xx/include/mach/spear.h - * - * spear13xx Machine family specific definition - * - * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.linux@gmail.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __MACH_SPEAR13XX_H -#define __MACH_SPEAR13XX_H - -#include <asm/memory.h> - -#define PERIP_GRP2_BASE UL(0xB3000000) -#define VA_PERIP_GRP2_BASE IOMEM(0xFE000000) -#define MCIF_SDHCI_BASE UL(0xB3000000) -#define SYSRAM0_BASE UL(0xB3800000) -#define VA_SYSRAM0_BASE IOMEM(0xFE800000) -#define SYS_LOCATION (VA_SYSRAM0_BASE + 0x600) - -#define PERIP_GRP1_BASE UL(0xE0000000) -#define VA_PERIP_GRP1_BASE IOMEM(0xFD000000) -#define UART_BASE UL(0xE0000000) -#define VA_UART_BASE IOMEM(0xFD000000) -#define SSP_BASE UL(0xE0100000) -#define MISC_BASE UL(0xE0700000) -#define VA_MISC_BASE IOMEM(0xFD700000) - -#define A9SM_AND_MPMC_BASE UL(0xEC000000) -#define VA_A9SM_AND_MPMC_BASE IOMEM(0xFC000000) - -/* A9SM peripheral offsets */ -#define A9SM_PERIP_BASE UL(0xEC800000) -#define VA_A9SM_PERIP_BASE IOMEM(0xFC800000) -#define VA_SCU_BASE (VA_A9SM_PERIP_BASE + 0x00) - -#define L2CC_BASE UL(0xED000000) -#define VA_L2CC_BASE IOMEM(UL(0xFB000000)) - -/* others */ -#define DMAC0_BASE UL(0xEA800000) -#define DMAC1_BASE UL(0xEB000000) -#define MCIF_CF_BASE UL(0xB2800000) - -/* Debug uart for linux, will be used for debug and uncompress messages */ -#define SPEAR_DBG_UART_BASE UART_BASE -#define VA_SPEAR_DBG_UART_BASE VA_UART_BASE - -#endif /* __MACH_SPEAR13XX_H */ diff --git a/arch/arm/mach-spear13xx/include/mach/timex.h b/arch/arm/mach-spear13xx/include/mach/timex.h deleted file mode 100644 index 3a58b8284a6a..000000000000 --- a/arch/arm/mach-spear13xx/include/mach/timex.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-spear3xx/include/mach/timex.h - * - * SPEAr3XX machine family specific timex definitions - * - * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.linux@gmail.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __MACH_TIMEX_H -#define __MACH_TIMEX_H - -#include <plat/timex.h> - -#endif /* __MACH_TIMEX_H */ diff --git a/arch/arm/mach-spear13xx/include/mach/uncompress.h b/arch/arm/mach-spear13xx/include/mach/uncompress.h deleted file mode 100644 index 70fe72f05dea..000000000000 --- a/arch/arm/mach-spear13xx/include/mach/uncompress.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-spear13xx/include/mach/uncompress.h - * - * Serial port stubs for kernel decompress status messages - * - * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.linux@gmail.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __MACH_UNCOMPRESS_H -#define __MACH_UNCOMPRESS_H - -#include <plat/uncompress.h> - -#endif /* __MACH_UNCOMPRESS_H */ diff --git a/arch/arm/mach-spear3xx/Kconfig b/arch/arm/mach-spear3xx/Kconfig deleted file mode 100644 index 8bd37291fa4f..000000000000 --- a/arch/arm/mach-spear3xx/Kconfig +++ /dev/null @@ -1,26 +0,0 @@ -# -# SPEAr3XX Machine configuration file -# - -if ARCH_SPEAR3XX - -menu "SPEAr3xx Implementations" -config MACH_SPEAR300 - bool "SPEAr300 Machine support with Device Tree" - select PINCTRL_SPEAR300 - help - Supports ST SPEAr300 machine configured via the device-tree - -config MACH_SPEAR310 - bool "SPEAr310 Machine support with Device Tree" - select PINCTRL_SPEAR310 - help - Supports ST SPEAr310 machine configured via the device-tree - -config MACH_SPEAR320 - bool "SPEAr320 Machine support with Device Tree" - select PINCTRL_SPEAR320 - help - Supports ST SPEAr320 machine configured via the device-tree -endmenu -endif #ARCH_SPEAR3XX diff --git a/arch/arm/mach-spear3xx/Makefile b/arch/arm/mach-spear3xx/Makefile deleted file mode 100644 index 8d12faa178fd..000000000000 --- a/arch/arm/mach-spear3xx/Makefile +++ /dev/null @@ -1,15 +0,0 @@ -# -# Makefile for SPEAr3XX machine series -# - -# common files -obj-$(CONFIG_ARCH_SPEAR3XX) += spear3xx.o - -# spear300 specific files -obj-$(CONFIG_MACH_SPEAR300) += spear300.o - -# spear310 specific files -obj-$(CONFIG_MACH_SPEAR310) += spear310.o - -# spear320 specific files -obj-$(CONFIG_MACH_SPEAR320) += spear320.o diff --git a/arch/arm/mach-spear3xx/Makefile.boot b/arch/arm/mach-spear3xx/Makefile.boot deleted file mode 100644 index 4674a4c221db..000000000000 --- a/arch/arm/mach-spear3xx/Makefile.boot +++ /dev/null @@ -1,3 +0,0 @@ -zreladdr-y += 0x00008000 -params_phys-y := 0x00000100 -initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-spear3xx/include/mach/debug-macro.S b/arch/arm/mach-spear3xx/include/mach/debug-macro.S deleted file mode 100644 index 0a6381fad5d9..000000000000 --- a/arch/arm/mach-spear3xx/include/mach/debug-macro.S +++ /dev/null @@ -1,14 +0,0 @@ -/* - * arch/arm/mach-spear3xx/include/mach/debug-macro.S - * - * Debugging macro include header spear3xx machine family - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.linux@gmail.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <plat/debug-macro.S> diff --git a/arch/arm/mach-spear3xx/include/mach/generic.h b/arch/arm/mach-spear3xx/include/mach/generic.h deleted file mode 100644 index df310799e416..000000000000 --- a/arch/arm/mach-spear3xx/include/mach/generic.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * arch/arm/mach-spear3xx/generic.h - * - * SPEAr3XX machine family generic header file - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.linux@gmail.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __MACH_GENERIC_H -#define __MACH_GENERIC_H - -#include <linux/amba/pl08x.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/amba/bus.h> -#include <asm/mach/time.h> -#include <asm/mach/map.h> - -/* Add spear3xx family device structure declarations here */ -extern void spear3xx_timer_init(void); -extern struct pl022_ssp_controller pl022_plat_data; -extern struct pl08x_platform_data pl080_plat_data; - -/* Add spear3xx family function declarations here */ -void __init spear_setup_of_timer(void); -void __init spear3xx_clk_init(void); -void __init spear3xx_map_io(void); - -void spear_restart(char, const char *); - -#endif /* __MACH_GENERIC_H */ diff --git a/arch/arm/mach-spear3xx/include/mach/hardware.h b/arch/arm/mach-spear3xx/include/mach/hardware.h deleted file mode 100644 index 40a8c178f10d..000000000000 --- a/arch/arm/mach-spear3xx/include/mach/hardware.h +++ /dev/null @@ -1 +0,0 @@ -/* empty */ diff --git a/arch/arm/mach-spear3xx/include/mach/irqs.h b/arch/arm/mach-spear3xx/include/mach/irqs.h deleted file mode 100644 index f95e5b2b6686..000000000000 --- a/arch/arm/mach-spear3xx/include/mach/irqs.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-spear3xx/include/mach/irqs.h - * - * IRQ helper macros for SPEAr3xx machine family - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar <viresh.linux@gmail.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __MACH_IRQS_H -#define __MACH_IRQS_H - -#define NR_IRQS 256 - -#endif /* __MACH_IRQS_H */ diff --git a/arch/arm/mach-spear3xx/include/mach/spear.h b/arch/arm/mach-spear3xx/include/mach/spear.h deleted file mode 100644 index 8cca95193d4d..000000000000 --- a/arch/arm/mach-spear3xx/include/mach/spear.h +++ /dev/null @@ -1,60 +0,0 @@ -/* - * arch/arm/mach-spear3xx/include/mach/spear.h - * - * SPEAr3xx Machine family specific definition - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar <viresh.linux@gmail.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __MACH_SPEAR3XX_H -#define __MACH_SPEAR3XX_H - -#include <asm/memory.h> - -/* ICM1 - Low speed connection */ -#define SPEAR3XX_ICM1_2_BASE UL(0xD0000000) -#define VA_SPEAR3XX_ICM1_2_BASE UL(0xFD000000) -#define SPEAR3XX_ICM1_UART_BASE UL(0xD0000000) -#define VA_SPEAR3XX_ICM1_UART_BASE (VA_SPEAR3XX_ICM1_2_BASE | SPEAR3XX_ICM1_UART_BASE) -#define SPEAR3XX_ICM1_SSP_BASE UL(0xD0100000) - -/* ML1 - Multi Layer CPU Subsystem */ -#define SPEAR3XX_ICM3_ML1_2_BASE UL(0xF0000000) -#define VA_SPEAR6XX_ML_CPU_BASE UL(0xF0000000) - -/* ICM3 - Basic Subsystem */ -#define SPEAR3XX_ICM3_SMI_CTRL_BASE UL(0xFC000000) -#define VA_SPEAR3XX_ICM3_SMI_CTRL_BASE UL(0xFC000000) -#define SPEAR3XX_ICM3_DMA_BASE UL(0xFC400000) -#define SPEAR3XX_ICM3_SYS_CTRL_BASE UL(0xFCA00000) -#define VA_SPEAR3XX_ICM3_SYS_CTRL_BASE (VA_SPEAR3XX_ICM3_SMI_CTRL_BASE | SPEAR3XX_ICM3_SYS_CTRL_BASE) -#define SPEAR3XX_ICM3_MISC_REG_BASE UL(0xFCA80000) -#define VA_SPEAR3XX_ICM3_MISC_REG_BASE (VA_SPEAR3XX_ICM3_SMI_CTRL_BASE | SPEAR3XX_ICM3_MISC_REG_BASE) - -/* Debug uart for linux, will be used for debug and uncompress messages */ -#define SPEAR_DBG_UART_BASE SPEAR3XX_ICM1_UART_BASE -#define VA_SPEAR_DBG_UART_BASE VA_SPEAR3XX_ICM1_UART_BASE - -/* Sysctl base for spear platform */ -#define SPEAR_SYS_CTRL_BASE SPEAR3XX_ICM3_SYS_CTRL_BASE -#define VA_SPEAR_SYS_CTRL_BASE VA_SPEAR3XX_ICM3_SYS_CTRL_BASE - -/* SPEAr320 Macros */ -#define SPEAR320_SOC_CONFIG_BASE UL(0xB3000000) -#define VA_SPEAR320_SOC_CONFIG_BASE UL(0xFE000000) -#define SPEAR320_CONTROL_REG IOMEM(VA_SPEAR320_SOC_CONFIG_BASE) -#define SPEAR320_EXT_CTRL_REG IOMEM(VA_SPEAR320_SOC_CONFIG_BASE + 0x0018) - #define SPEAR320_UARTX_PCLK_MASK 0x1 - #define SPEAR320_UART2_PCLK_SHIFT 8 - #define SPEAR320_UART3_PCLK_SHIFT 9 - #define SPEAR320_UART4_PCLK_SHIFT 10 - #define SPEAR320_UART5_PCLK_SHIFT 11 - #define SPEAR320_UART6_PCLK_SHIFT 12 - #define SPEAR320_RS485_PCLK_SHIFT 13 - -#endif /* __MACH_SPEAR3XX_H */ diff --git a/arch/arm/mach-spear3xx/include/mach/timex.h b/arch/arm/mach-spear3xx/include/mach/timex.h deleted file mode 100644 index 9f5d08bd0c44..000000000000 --- a/arch/arm/mach-spear3xx/include/mach/timex.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-spear3xx/include/mach/timex.h - * - * SPEAr3XX machine family specific timex definitions - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar <viresh.linux@gmail.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __MACH_TIMEX_H -#define __MACH_TIMEX_H - -#include <plat/timex.h> - -#endif /* __MACH_TIMEX_H */ diff --git a/arch/arm/mach-spear3xx/include/mach/uncompress.h b/arch/arm/mach-spear3xx/include/mach/uncompress.h deleted file mode 100644 index b909b011f7c8..000000000000 --- a/arch/arm/mach-spear3xx/include/mach/uncompress.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-spear3xx/include/mach/uncompress.h - * - * Serial port stubs for kernel decompress status messages - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar <viresh.linux@gmail.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __MACH_UNCOMPRESS_H -#define __MACH_UNCOMPRESS_H - -#include <plat/uncompress.h> - -#endif /* __MACH_UNCOMPRESS_H */ diff --git a/arch/arm/mach-spear6xx/Kconfig b/arch/arm/mach-spear6xx/Kconfig deleted file mode 100644 index 339f397dea70..000000000000 --- a/arch/arm/mach-spear6xx/Kconfig +++ /dev/null @@ -1,10 +0,0 @@ -# -# SPEAr6XX Machine configuration file -# - -config MACH_SPEAR600 - def_bool y - depends on ARCH_SPEAR6XX - select USE_OF - help - Supports ST SPEAr600 boards configured via the device-tree diff --git a/arch/arm/mach-spear6xx/Makefile b/arch/arm/mach-spear6xx/Makefile deleted file mode 100644 index 898831d93f37..000000000000 --- a/arch/arm/mach-spear6xx/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# -# Makefile for SPEAr6XX machine series -# - -# common files -obj-y += spear6xx.o diff --git a/arch/arm/mach-spear6xx/Makefile.boot b/arch/arm/mach-spear6xx/Makefile.boot deleted file mode 100644 index 4674a4c221db..000000000000 --- a/arch/arm/mach-spear6xx/Makefile.boot +++ /dev/null @@ -1,3 +0,0 @@ -zreladdr-y += 0x00008000 -params_phys-y := 0x00000100 -initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-spear6xx/include/mach/debug-macro.S b/arch/arm/mach-spear6xx/include/mach/debug-macro.S deleted file mode 100644 index 0f3ea39edd96..000000000000 --- a/arch/arm/mach-spear6xx/include/mach/debug-macro.S +++ /dev/null @@ -1,14 +0,0 @@ -/* - * arch/arm/mach-spear6xx/include/mach/debug-macro.S - * - * Debugging macro include header for SPEAr6xx machine family - * - * Copyright (C) 2009 ST Microelectronics - * Rajeev Kumar<rajeev-dlh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <plat/debug-macro.S> diff --git a/arch/arm/mach-spear6xx/include/mach/generic.h b/arch/arm/mach-spear6xx/include/mach/generic.h deleted file mode 100644 index 65514b159370..000000000000 --- a/arch/arm/mach-spear6xx/include/mach/generic.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * arch/arm/mach-spear6xx/include/mach/generic.h - * - * SPEAr6XX machine family specific generic header file - * - * Copyright (C) 2009 ST Microelectronics - * Rajeev Kumar<rajeev-dlh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __MACH_GENERIC_H -#define __MACH_GENERIC_H - -#include <linux/init.h> - -void __init spear_setup_of_timer(void); -void spear_restart(char, const char *); -void __init spear6xx_clk_init(void); - -#endif /* __MACH_GENERIC_H */ diff --git a/arch/arm/mach-spear6xx/include/mach/hardware.h b/arch/arm/mach-spear6xx/include/mach/hardware.h deleted file mode 100644 index 40a8c178f10d..000000000000 --- a/arch/arm/mach-spear6xx/include/mach/hardware.h +++ /dev/null @@ -1 +0,0 @@ -/* empty */ diff --git a/arch/arm/mach-spear6xx/include/mach/misc_regs.h b/arch/arm/mach-spear6xx/include/mach/misc_regs.h deleted file mode 100644 index c34acc201d34..000000000000 --- a/arch/arm/mach-spear6xx/include/mach/misc_regs.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * arch/arm/mach-spear6xx/include/mach/misc_regs.h - * - * Miscellaneous registers definitions for SPEAr6xx machine family - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar <viresh.linux@gmail.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __MACH_MISC_REGS_H -#define __MACH_MISC_REGS_H - -#include <mach/spear.h> - -#define MISC_BASE IOMEM(VA_SPEAR6XX_ICM3_MISC_REG_BASE) -#define DMA_CHN_CFG (MISC_BASE + 0x0A0) - -#endif /* __MACH_MISC_REGS_H */ diff --git a/arch/arm/mach-spear6xx/include/mach/spear.h b/arch/arm/mach-spear6xx/include/mach/spear.h deleted file mode 100644 index cb8ed2f4dc85..000000000000 --- a/arch/arm/mach-spear6xx/include/mach/spear.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * arch/arm/mach-spear6xx/include/mach/spear.h - * - * SPEAr6xx Machine family specific definition - * - * Copyright (C) 2009 ST Microelectronics - * Rajeev Kumar<rajeev-dlh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __MACH_SPEAR6XX_H -#define __MACH_SPEAR6XX_H - -#include <asm/memory.h> - -/* ICM1 - Low speed connection */ -#define SPEAR6XX_ICM1_BASE UL(0xD0000000) -#define VA_SPEAR6XX_ICM1_BASE UL(0xFD000000) -#define SPEAR6XX_ICM1_UART0_BASE UL(0xD0000000) -#define VA_SPEAR6XX_ICM1_UART0_BASE (VA_SPEAR6XX_ICM1_2_BASE | SPEAR6XX_ICM1_UART0_BASE) - -/* ML-1, 2 - Multi Layer CPU Subsystem */ -#define SPEAR6XX_ML_CPU_BASE UL(0xF0000000) -#define VA_SPEAR6XX_ML_CPU_BASE UL(0xF0000000) - -/* ICM3 - Basic Subsystem */ -#define SPEAR6XX_ICM3_SMI_CTRL_BASE UL(0xFC000000) -#define VA_SPEAR6XX_ICM3_SMI_CTRL_BASE UL(0xFC000000) -#define SPEAR6XX_ICM3_DMA_BASE UL(0xFC400000) -#define SPEAR6XX_ICM3_SYS_CTRL_BASE UL(0xFCA00000) -#define VA_SPEAR6XX_ICM3_SYS_CTRL_BASE (VA_SPEAR6XX_ICM3_SMI_CTRL_BASE | SPEAR6XX_ICM3_SYS_CTRL_BASE) -#define SPEAR6XX_ICM3_MISC_REG_BASE UL(0xFCA80000) -#define VA_SPEAR6XX_ICM3_MISC_REG_BASE (VA_SPEAR6XX_ICM3_SMI_CTRL_BASE | SPEAR6XX_ICM3_MISC_REG_BASE) - -/* Debug uart for linux, will be used for debug and uncompress messages */ -#define SPEAR_DBG_UART_BASE SPEAR6XX_ICM1_UART0_BASE -#define VA_SPEAR_DBG_UART_BASE VA_SPEAR6XX_ICM1_UART0_BASE - -/* Sysctl base for spear platform */ -#define SPEAR_SYS_CTRL_BASE SPEAR6XX_ICM3_SYS_CTRL_BASE -#define VA_SPEAR_SYS_CTRL_BASE VA_SPEAR6XX_ICM3_SYS_CTRL_BASE - -#endif /* __MACH_SPEAR6XX_H */ diff --git a/arch/arm/mach-spear6xx/include/mach/timex.h b/arch/arm/mach-spear6xx/include/mach/timex.h deleted file mode 100644 index ac1c5b005695..000000000000 --- a/arch/arm/mach-spear6xx/include/mach/timex.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-spear6xx/include/mach/timex.h - * - * SPEAr6XX machine family specific timex definitions - * - * Copyright (C) 2009 ST Microelectronics - * Rajeev Kumar<rajeev-dlh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __MACH_TIMEX_H -#define __MACH_TIMEX_H - -#include <plat/timex.h> - -#endif /* __MACH_TIMEX_H */ diff --git a/arch/arm/mach-spear6xx/include/mach/uncompress.h b/arch/arm/mach-spear6xx/include/mach/uncompress.h deleted file mode 100644 index 77f0765e21e1..000000000000 --- a/arch/arm/mach-spear6xx/include/mach/uncompress.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-spear6xx/include/mach/uncompress.h - * - * Serial port stubs for kernel decompress status messages - * - * Copyright (C) 2009 ST Microelectronics - * Rajeev Kumar<rajeev-dlh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __MACH_UNCOMPRESS_H -#define __MACH_UNCOMPRESS_H - -#include <plat/uncompress.h> - -#endif /* __MACH_UNCOMPRESS_H */ diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index 8709a39bd34c..d259c782d742 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -1,10 +1,11 @@ config ARCH_SUNXI bool "Allwinner A1X SOCs" if ARCH_MULTI_V7 select CLKSRC_MMIO + select CLKSRC_OF select COMMON_CLK select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP select PINCTRL select SPARSE_IRQ - select SUNXI_TIMER - select PINCTRL_SUNXI
\ No newline at end of file + select SUN4I_TIMER + select PINCTRL_SUNXI diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c index 23afb732cb40..706ce35396b8 100644 --- a/arch/arm/mach-sunxi/sunxi.c +++ b/arch/arm/mach-sunxi/sunxi.c @@ -10,63 +10,77 @@ * warranty of any kind, whether express or implied. */ +#include <linux/clocksource.h> #include <linux/delay.h> #include <linux/kernel.h> #include <linux/init.h> +#include <linux/irqchip.h> #include <linux/of_address.h> #include <linux/of_irq.h> #include <linux/of_platform.h> #include <linux/io.h> -#include <linux/sunxi_timer.h> -#include <linux/irqchip/sunxi.h> +#include <linux/clk/sunxi.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <asm/system_misc.h> #include "sunxi.h" -#define WATCHDOG_CTRL_REG 0x00 -#define WATCHDOG_CTRL_RESTART (1 << 0) -#define WATCHDOG_MODE_REG 0x04 -#define WATCHDOG_MODE_ENABLE (1 << 0) -#define WATCHDOG_MODE_RESET_ENABLE (1 << 1) +#define SUN4I_WATCHDOG_CTRL_REG 0x00 +#define SUN4I_WATCHDOG_CTRL_RESTART (1 << 0) +#define SUN4I_WATCHDOG_MODE_REG 0x04 +#define SUN4I_WATCHDOG_MODE_ENABLE (1 << 0) +#define SUN4I_WATCHDOG_MODE_RESET_ENABLE (1 << 1) static void __iomem *wdt_base; -static void sunxi_setup_restart(void) -{ - struct device_node *np = of_find_compatible_node(NULL, NULL, - "allwinner,sunxi-wdt"); - if (WARN(!np, "unable to setup watchdog restart")) - return; - - wdt_base = of_iomap(np, 0); - WARN(!wdt_base, "failed to map watchdog base address"); -} - -static void sunxi_restart(char mode, const char *cmd) +static void sun4i_restart(char mode, const char *cmd) { if (!wdt_base) return; /* Enable timer and set reset bit in the watchdog */ - writel(WATCHDOG_MODE_ENABLE | WATCHDOG_MODE_RESET_ENABLE, - wdt_base + WATCHDOG_MODE_REG); + writel(SUN4I_WATCHDOG_MODE_ENABLE | SUN4I_WATCHDOG_MODE_RESET_ENABLE, + wdt_base + SUN4I_WATCHDOG_MODE_REG); /* * Restart the watchdog. The default (and lowest) interval * value for the watchdog is 0.5s. */ - writel(WATCHDOG_CTRL_RESTART, wdt_base + WATCHDOG_CTRL_REG); + writel(SUN4I_WATCHDOG_CTRL_RESTART, wdt_base + SUN4I_WATCHDOG_CTRL_REG); while (1) { mdelay(5); - writel(WATCHDOG_MODE_ENABLE | WATCHDOG_MODE_RESET_ENABLE, - wdt_base + WATCHDOG_MODE_REG); + writel(SUN4I_WATCHDOG_MODE_ENABLE | SUN4I_WATCHDOG_MODE_RESET_ENABLE, + wdt_base + SUN4I_WATCHDOG_MODE_REG); } } +static struct of_device_id sunxi_restart_ids[] = { + { .compatible = "allwinner,sun4i-wdt", .data = sun4i_restart }, + { /*sentinel*/ } +}; + +static void sunxi_setup_restart(void) +{ + const struct of_device_id *of_id; + struct device_node *np; + + np = of_find_matching_node(NULL, sunxi_restart_ids); + if (WARN(!np, "unable to setup watchdog restart")) + return; + + wdt_base = of_iomap(np, 0); + WARN(!wdt_base, "failed to map watchdog base address"); + + of_id = of_match_node(sunxi_restart_ids, np); + WARN(!of_id, "restart function not available"); + + arm_pm_restart = of_id->data; +} + static struct map_desc sunxi_io_desc[] __initdata = { { .virtual = (unsigned long) SUNXI_REGS_VIRT_BASE, @@ -81,6 +95,12 @@ void __init sunxi_map_io(void) iotable_init(sunxi_io_desc, ARRAY_SIZE(sunxi_io_desc)); } +static void __init sunxi_timer_init(void) +{ + sunxi_init_clocks(); + clocksource_of_init(); +} + static void __init sunxi_dt_init(void) { sunxi_setup_restart(); @@ -97,9 +117,7 @@ static const char * const sunxi_board_dt_compat[] = { DT_MACHINE_START(SUNXI_DT, "Allwinner A1X (Device Tree)") .init_machine = sunxi_dt_init, .map_io = sunxi_map_io, - .init_irq = sunxi_init_irq, - .handle_irq = sunxi_handle_irq, - .restart = sunxi_restart, - .init_time = &sunxi_timer_init, + .init_irq = irqchip_init, + .init_time = sunxi_timer_init, .dt_compat = sunxi_board_dt_compat, MACHINE_END diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index d1c4893894ce..20c3b372cdf5 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -1,13 +1,30 @@ -if ARCH_TEGRA +config ARCH_TEGRA + bool "NVIDIA Tegra" if ARCH_MULTI_V7 + select ARCH_HAS_CPUFREQ + select ARCH_REQUIRE_GPIOLIB + select CLKDEV_LOOKUP + select CLKSRC_MMIO + select CLKSRC_OF + select COMMON_CLK + select GENERIC_CLOCKEVENTS + select HAVE_ARM_SCU if SMP + select HAVE_ARM_TWD if LOCAL_TIMERS + select HAVE_CLK + select HAVE_SMP + select MIGHT_HAVE_CACHE_L2X0 + select SOC_BUS + select SPARSE_IRQ + select USE_OF + help + This enables support for NVIDIA Tegra based systems. -comment "NVIDIA Tegra options" +menu "NVIDIA Tegra options" + depends on ARCH_TEGRA config ARCH_TEGRA_2x_SOC bool "Enable support for Tegra20 family" select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP select ARM_ERRATA_720789 - select ARM_ERRATA_742230 if SMP - select ARM_ERRATA_751472 select ARM_ERRATA_754327 if SMP select ARM_ERRATA_764369 if SMP select ARM_GIC @@ -18,16 +35,14 @@ config ARCH_TEGRA_2x_SOC select PL310_ERRATA_727915 if CACHE_L2X0 select PL310_ERRATA_769419 if CACHE_L2X0 select USB_ARCH_HAS_EHCI if USB_SUPPORT - select USB_ULPI if USB - select USB_ULPI_VIEWPORT if USB_SUPPORT + select USB_ULPI if USB_PHY + select USB_ULPI_VIEWPORT if USB_PHY help Support for NVIDIA Tegra AP20 and T20 processors, based on the ARM CortexA9MP CPU and the ARM PL310 L2 cache controller config ARCH_TEGRA_3x_SOC bool "Enable support for Tegra30 family" - select ARM_ERRATA_743622 - select ARM_ERRATA_751472 select ARM_ERRATA_754322 select ARM_ERRATA_764369 if SMP select ARM_GIC @@ -37,8 +52,8 @@ config ARCH_TEGRA_3x_SOC select PINCTRL_TEGRA30 select PL310_ERRATA_769419 if CACHE_L2X0 select USB_ARCH_HAS_EHCI if USB_SUPPORT - select USB_ULPI if USB - select USB_ULPI_VIEWPORT if USB_SUPPORT + select USB_ULPI if USB_PHY + select USB_ULPI_VIEWPORT if USB_PHY help Support for NVIDIA Tegra T30 processor family, based on the ARM CortexA9MP CPU and the ARM PL310 L2 cache controller @@ -71,4 +86,4 @@ config TEGRA_AHB config TEGRA_EMC_SCALING_ENABLE bool "Enable scaling the memory frequency" -endif +endmenu diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile index f6b46ae2b7f8..d011f0ad49c4 100644 --- a/arch/arm/mach-tegra/Makefile +++ b/arch/arm/mach-tegra/Makefile @@ -1,3 +1,5 @@ +asflags-y += -march=armv7-a + obj-y += common.o obj-y += io.o obj-y += irq.o @@ -10,6 +12,7 @@ obj-y += pm.o obj-y += reset.o obj-y += reset-handler.o obj-y += sleep.o +obj-y += tegra.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20_speedo.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra2_emc.o @@ -24,12 +27,9 @@ obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += cpuidle-tegra30.o endif obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o -obj-$(CONFIG_CPU_FREQ) += cpu-tegra.o obj-$(CONFIG_TEGRA_PCI) += pcie.o -obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += board-dt-tegra20.o -obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += board-dt-tegra30.o -obj-$(CONFIG_ARCH_TEGRA_114_SOC) += board-dt-tegra114.o +obj-$(CONFIG_ARCH_TEGRA_114_SOC) += tegra114_speedo.o ifeq ($(CONFIG_CPU_IDLE),y) obj-$(CONFIG_ARCH_TEGRA_114_SOC) += cpuidle-tegra114.o endif diff --git a/arch/arm/mach-tegra/Makefile.boot b/arch/arm/mach-tegra/Makefile.boot deleted file mode 100644 index 29433816233c..000000000000 --- a/arch/arm/mach-tegra/Makefile.boot +++ /dev/null @@ -1,3 +0,0 @@ -zreladdr-$(CONFIG_ARCH_TEGRA_2x_SOC) += 0x00008000 -params_phys-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00000100 -initrd_phys-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00800000 diff --git a/arch/arm/mach-tegra/board-dt-tegra114.c b/arch/arm/mach-tegra/board-dt-tegra114.c deleted file mode 100644 index 085d63637b62..000000000000 --- a/arch/arm/mach-tegra/board-dt-tegra114.c +++ /dev/null @@ -1,46 +0,0 @@ -/* - * NVIDIA Tegra114 device tree board support - * - * Copyright (C) 2013 NVIDIA Corporation - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/of.h> -#include <linux/of_platform.h> -#include <linux/clocksource.h> - -#include <asm/mach/arch.h> - -#include "board.h" -#include "common.h" - -static void __init tegra114_dt_init(void) -{ - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); -} - -static const char * const tegra114_dt_board_compat[] = { - "nvidia,tegra114", - NULL, -}; - -DT_MACHINE_START(TEGRA114_DT, "NVIDIA Tegra114 (Flattened Device Tree)") - .smp = smp_ops(tegra_smp_ops), - .map_io = tegra_map_common_io, - .init_early = tegra114_init_early, - .init_irq = tegra_dt_init_irq, - .init_time = clocksource_of_init, - .init_machine = tegra114_dt_init, - .init_late = tegra_init_late, - .restart = tegra_assert_system_reset, - .dt_compat = tegra114_dt_board_compat, -MACHINE_END diff --git a/arch/arm/mach-tegra/board-dt-tegra30.c b/arch/arm/mach-tegra/board-dt-tegra30.c deleted file mode 100644 index bf68567e549d..000000000000 --- a/arch/arm/mach-tegra/board-dt-tegra30.c +++ /dev/null @@ -1,60 +0,0 @@ -/* - * arch/arm/mach-tegra/board-dt-tegra30.c - * - * NVIDIA Tegra30 device tree board support - * - * Copyright (C) 2011 NVIDIA Corporation - * - * Derived from: - * - * arch/arm/mach-tegra/board-dt-tegra20.c - * - * Copyright (C) 2010 Secret Lab Technologies, Ltd. - * Copyright (C) 2010 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/clocksource.h> -#include <linux/kernel.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/of_fdt.h> -#include <linux/of_irq.h> -#include <linux/of_platform.h> - -#include <asm/mach/arch.h> - -#include "board.h" -#include "common.h" -#include "iomap.h" - -static void __init tegra30_dt_init(void) -{ - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); -} - -static const char *tegra30_dt_board_compat[] = { - "nvidia,tegra30", - NULL -}; - -DT_MACHINE_START(TEGRA30_DT, "NVIDIA Tegra30 (Flattened Device Tree)") - .smp = smp_ops(tegra_smp_ops), - .map_io = tegra_map_common_io, - .init_early = tegra30_init_early, - .init_irq = tegra_dt_init_irq, - .init_time = clocksource_of_init, - .init_machine = tegra30_dt_init, - .init_late = tegra_init_late, - .restart = tegra_assert_system_reset, - .dt_compat = tegra30_dt_board_compat, -MACHINE_END diff --git a/arch/arm/mach-tegra/board-harmony-pcie.c b/arch/arm/mach-tegra/board-harmony-pcie.c index 3cdc1bb8254c..035b240b9e15 100644 --- a/arch/arm/mach-tegra/board-harmony-pcie.c +++ b/arch/arm/mach-tegra/board-harmony-pcie.c @@ -56,13 +56,17 @@ int __init harmony_pcie_init(void) gpio_direction_output(en_vdd_1v05, 1); regulator = regulator_get(NULL, "vdd_ldo0,vddio_pex_clk"); - if (IS_ERR_OR_NULL(regulator)) { - pr_err("%s: regulator_get failed: %d\n", __func__, - (int)PTR_ERR(regulator)); + if (IS_ERR(regulator)) { + err = PTR_ERR(regulator); + pr_err("%s: regulator_get failed: %d\n", __func__, err); goto err_reg; } - regulator_enable(regulator); + err = regulator_enable(regulator); + if (err) { + pr_err("%s: regulator_enable failed: %d\n", __func__, err); + goto err_en; + } err = tegra_pcie_init(true, true); if (err) { @@ -74,6 +78,7 @@ int __init harmony_pcie_init(void) err_pcie: regulator_disable(regulator); +err_en: regulator_put(regulator); err_reg: gpio_free(en_vdd_1v05); diff --git a/arch/arm/mach-tegra/board.h b/arch/arm/mach-tegra/board.h index 86851c81a350..1787327fae3a 100644 --- a/arch/arm/mach-tegra/board.h +++ b/arch/arm/mach-tegra/board.h @@ -26,9 +26,7 @@ void tegra_assert_system_reset(char mode, const char *cmd); -void __init tegra20_init_early(void); -void __init tegra30_init_early(void); -void __init tegra114_init_early(void); +void __init tegra_init_early(void); void __init tegra_map_common_io(void); void __init tegra_init_irq(void); void __init tegra_dt_init_irq(void); @@ -42,6 +40,7 @@ int tegra_clk_debugfs_init(void); static inline int tegra_clk_debugfs_init(void) { return 0; } #endif +int __init tegra_powergate_init(void); #if defined(CONFIG_ARCH_TEGRA_2x_SOC) && defined(CONFIG_DEBUG_FS) int __init tegra_powergate_debugfs_init(void); #else diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c index 5449a3f2977b..9f852c6fe5b9 100644 --- a/arch/arm/mach-tegra/common.c +++ b/arch/arm/mach-tegra/common.c @@ -27,12 +27,11 @@ #include <asm/hardware/cache-l2x0.h> -#include <mach/powergate.h> - #include "board.h" #include "common.h" #include "fuse.h" #include "iomap.h" +#include "irq.h" #include "pmc.h" #include "apbio.h" #include "sleep.h" @@ -61,8 +60,10 @@ u32 tegra_uart_config[4] = { void __init tegra_dt_init_irq(void) { tegra_clocks_init(); + tegra_pmc_init(); tegra_init_irq(); irqchip_init(); + tegra_legacy_irq_syscore_init(); } #endif @@ -94,40 +95,18 @@ static void __init tegra_init_cache(void) } -static void __init tegra_init_early(void) +void __init tegra_init_early(void) { tegra_cpu_reset_handler_init(); tegra_apb_io_init(); tegra_init_fuse(); tegra_init_cache(); - tegra_pmc_init(); tegra_powergate_init(); + tegra_hotplug_init(); } -#ifdef CONFIG_ARCH_TEGRA_2x_SOC -void __init tegra20_init_early(void) -{ - tegra_init_early(); - tegra20_hotplug_init(); -} -#endif - -#ifdef CONFIG_ARCH_TEGRA_3x_SOC -void __init tegra30_init_early(void) -{ - tegra_init_early(); - tegra30_hotplug_init(); -} -#endif - -#ifdef CONFIG_ARCH_TEGRA_114_SOC -void __init tegra114_init_early(void) -{ - tegra_init_early(); -} -#endif - void __init tegra_init_late(void) { + tegra_init_suspend(); tegra_powergate_debugfs_init(); } diff --git a/arch/arm/mach-tegra/common.h b/arch/arm/mach-tegra/common.h index 32f8eb3fe344..5900cc44f780 100644 --- a/arch/arm/mach-tegra/common.h +++ b/arch/arm/mach-tegra/common.h @@ -2,4 +2,3 @@ extern struct smp_operations tegra_smp_ops; extern int tegra_cpu_kill(unsigned int cpu); extern void tegra_cpu_die(unsigned int cpu); -extern int tegra_cpu_disable(unsigned int cpu); diff --git a/arch/arm/mach-tegra/cpu-tegra.c b/arch/arm/mach-tegra/cpu-tegra.c deleted file mode 100644 index e3d6e15ff188..000000000000 --- a/arch/arm/mach-tegra/cpu-tegra.c +++ /dev/null @@ -1,293 +0,0 @@ -/* - * arch/arm/mach-tegra/cpu-tegra.c - * - * Copyright (C) 2010 Google, Inc. - * - * Author: - * Colin Cross <ccross@google.com> - * Based on arch/arm/plat-omap/cpu-omap.c, (C) 2005 Nokia Corporation - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/types.h> -#include <linux/sched.h> -#include <linux/cpufreq.h> -#include <linux/delay.h> -#include <linux/init.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/suspend.h> - -/* Frequency table index must be sequential starting at 0 */ -static struct cpufreq_frequency_table freq_table[] = { - { 0, 216000 }, - { 1, 312000 }, - { 2, 456000 }, - { 3, 608000 }, - { 4, 760000 }, - { 5, 816000 }, - { 6, 912000 }, - { 7, 1000000 }, - { 8, CPUFREQ_TABLE_END }, -}; - -#define NUM_CPUS 2 - -static struct clk *cpu_clk; -static struct clk *pll_x_clk; -static struct clk *pll_p_clk; -static struct clk *emc_clk; - -static unsigned long target_cpu_speed[NUM_CPUS]; -static DEFINE_MUTEX(tegra_cpu_lock); -static bool is_suspended; - -static int tegra_verify_speed(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, freq_table); -} - -static unsigned int tegra_getspeed(unsigned int cpu) -{ - unsigned long rate; - - if (cpu >= NUM_CPUS) - return 0; - - rate = clk_get_rate(cpu_clk) / 1000; - return rate; -} - -static int tegra_cpu_clk_set_rate(unsigned long rate) -{ - int ret; - - /* - * Take an extra reference to the main pll so it doesn't turn - * off when we move the cpu off of it - */ - clk_prepare_enable(pll_x_clk); - - ret = clk_set_parent(cpu_clk, pll_p_clk); - if (ret) { - pr_err("Failed to switch cpu to clock pll_p\n"); - goto out; - } - - if (rate == clk_get_rate(pll_p_clk)) - goto out; - - ret = clk_set_rate(pll_x_clk, rate); - if (ret) { - pr_err("Failed to change pll_x to %lu\n", rate); - goto out; - } - - ret = clk_set_parent(cpu_clk, pll_x_clk); - if (ret) { - pr_err("Failed to switch cpu to clock pll_x\n"); - goto out; - } - -out: - clk_disable_unprepare(pll_x_clk); - return ret; -} - -static int tegra_update_cpu_speed(unsigned long rate) -{ - int ret = 0; - struct cpufreq_freqs freqs; - - freqs.old = tegra_getspeed(0); - freqs.new = rate; - - if (freqs.old == freqs.new) - return ret; - - /* - * Vote on memory bus frequency based on cpu frequency - * This sets the minimum frequency, display or avp may request higher - */ - if (rate >= 816000) - clk_set_rate(emc_clk, 600000000); /* cpu 816 MHz, emc max */ - else if (rate >= 456000) - clk_set_rate(emc_clk, 300000000); /* cpu 456 MHz, emc 150Mhz */ - else - clk_set_rate(emc_clk, 100000000); /* emc 50Mhz */ - - for_each_online_cpu(freqs.cpu) - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - -#ifdef CONFIG_CPU_FREQ_DEBUG - printk(KERN_DEBUG "cpufreq-tegra: transition: %u --> %u\n", - freqs.old, freqs.new); -#endif - - ret = tegra_cpu_clk_set_rate(freqs.new * 1000); - if (ret) { - pr_err("cpu-tegra: Failed to set cpu frequency to %d kHz\n", - freqs.new); - return ret; - } - - for_each_online_cpu(freqs.cpu) - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - return 0; -} - -static unsigned long tegra_cpu_highest_speed(void) -{ - unsigned long rate = 0; - int i; - - for_each_online_cpu(i) - rate = max(rate, target_cpu_speed[i]); - return rate; -} - -static int tegra_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - unsigned int idx; - unsigned int freq; - int ret = 0; - - mutex_lock(&tegra_cpu_lock); - - if (is_suspended) { - ret = -EBUSY; - goto out; - } - - cpufreq_frequency_table_target(policy, freq_table, target_freq, - relation, &idx); - - freq = freq_table[idx].frequency; - - target_cpu_speed[policy->cpu] = freq; - - ret = tegra_update_cpu_speed(tegra_cpu_highest_speed()); - -out: - mutex_unlock(&tegra_cpu_lock); - return ret; -} - -static int tegra_pm_notify(struct notifier_block *nb, unsigned long event, - void *dummy) -{ - mutex_lock(&tegra_cpu_lock); - if (event == PM_SUSPEND_PREPARE) { - is_suspended = true; - pr_info("Tegra cpufreq suspend: setting frequency to %d kHz\n", - freq_table[0].frequency); - tegra_update_cpu_speed(freq_table[0].frequency); - } else if (event == PM_POST_SUSPEND) { - is_suspended = false; - } - mutex_unlock(&tegra_cpu_lock); - - return NOTIFY_OK; -} - -static struct notifier_block tegra_cpu_pm_notifier = { - .notifier_call = tegra_pm_notify, -}; - -static int tegra_cpu_init(struct cpufreq_policy *policy) -{ - if (policy->cpu >= NUM_CPUS) - return -EINVAL; - - clk_prepare_enable(emc_clk); - clk_prepare_enable(cpu_clk); - - cpufreq_frequency_table_cpuinfo(policy, freq_table); - cpufreq_frequency_table_get_attr(freq_table, policy->cpu); - policy->cur = tegra_getspeed(policy->cpu); - target_cpu_speed[policy->cpu] = policy->cur; - - /* FIXME: what's the actual transition time? */ - policy->cpuinfo.transition_latency = 300 * 1000; - - cpumask_copy(policy->cpus, cpu_possible_mask); - - if (policy->cpu == 0) - register_pm_notifier(&tegra_cpu_pm_notifier); - - return 0; -} - -static int tegra_cpu_exit(struct cpufreq_policy *policy) -{ - cpufreq_frequency_table_cpuinfo(policy, freq_table); - clk_disable_unprepare(emc_clk); - return 0; -} - -static struct freq_attr *tegra_cpufreq_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static struct cpufreq_driver tegra_cpufreq_driver = { - .verify = tegra_verify_speed, - .target = tegra_target, - .get = tegra_getspeed, - .init = tegra_cpu_init, - .exit = tegra_cpu_exit, - .name = "tegra", - .attr = tegra_cpufreq_attr, -}; - -static int __init tegra_cpufreq_init(void) -{ - cpu_clk = clk_get_sys(NULL, "cpu"); - if (IS_ERR(cpu_clk)) - return PTR_ERR(cpu_clk); - - pll_x_clk = clk_get_sys(NULL, "pll_x"); - if (IS_ERR(pll_x_clk)) - return PTR_ERR(pll_x_clk); - - pll_p_clk = clk_get_sys(NULL, "pll_p_cclk"); - if (IS_ERR(pll_p_clk)) - return PTR_ERR(pll_p_clk); - - emc_clk = clk_get_sys("cpu", "emc"); - if (IS_ERR(emc_clk)) { - clk_put(cpu_clk); - return PTR_ERR(emc_clk); - } - - return cpufreq_register_driver(&tegra_cpufreq_driver); -} - -static void __exit tegra_cpufreq_exit(void) -{ - cpufreq_unregister_driver(&tegra_cpufreq_driver); - clk_put(emc_clk); - clk_put(cpu_clk); -} - - -MODULE_AUTHOR("Colin Cross <ccross@android.com>"); -MODULE_DESCRIPTION("cpufreq driver for Nvidia Tegra2"); -MODULE_LICENSE("GPL"); -module_init(tegra_cpufreq_init); -module_exit(tegra_cpufreq_exit); diff --git a/arch/arm/mach-tegra/cpuidle-tegra114.c b/arch/arm/mach-tegra/cpuidle-tegra114.c index 0f4e8c483b34..1d1c6023f4a2 100644 --- a/arch/arm/mach-tegra/cpuidle-tegra114.c +++ b/arch/arm/mach-tegra/cpuidle-tegra114.c @@ -23,39 +23,13 @@ static struct cpuidle_driver tegra_idle_driver = { .name = "tegra_idle", .owner = THIS_MODULE, - .en_core_tk_irqen = 1, .state_count = 1, .states = { [0] = ARM_CPUIDLE_WFI_STATE_PWR(600), }, }; -static DEFINE_PER_CPU(struct cpuidle_device, tegra_idle_device); - int __init tegra114_cpuidle_init(void) { - int ret; - unsigned int cpu; - struct cpuidle_device *dev; - struct cpuidle_driver *drv = &tegra_idle_driver; - - ret = cpuidle_register_driver(&tegra_idle_driver); - if (ret) { - pr_err("CPUidle driver registration failed\n"); - return ret; - } - - for_each_possible_cpu(cpu) { - dev = &per_cpu(tegra_idle_device, cpu); - dev->cpu = cpu; - - dev->state_count = drv->state_count; - ret = cpuidle_register_device(dev); - if (ret) { - pr_err("CPU%u: CPUidle device registration failed\n", - cpu); - return ret; - } - } - return 0; + return cpuidle_register(&tegra_idle_driver, NULL); } diff --git a/arch/arm/mach-tegra/cpuidle-tegra20.c b/arch/arm/mach-tegra/cpuidle-tegra20.c index 825ced4f7a40..0cdba8de8c77 100644 --- a/arch/arm/mach-tegra/cpuidle-tegra20.c +++ b/arch/arm/mach-tegra/cpuidle-tegra20.c @@ -43,32 +43,33 @@ static atomic_t abort_barrier; static int tegra20_idle_lp2_coupled(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index); +#define TEGRA20_MAX_STATES 2 +#else +#define TEGRA20_MAX_STATES 1 #endif -static struct cpuidle_state tegra_idle_states[] = { - [0] = ARM_CPUIDLE_WFI_STATE_PWR(600), -#ifdef CONFIG_PM_SLEEP - [1] = { - .enter = tegra20_idle_lp2_coupled, - .exit_latency = 5000, - .target_residency = 10000, - .power_usage = 0, - .flags = CPUIDLE_FLAG_TIME_VALID | - CPUIDLE_FLAG_COUPLED, - .name = "powered-down", - .desc = "CPU power gated", - }, -#endif -}; - static struct cpuidle_driver tegra_idle_driver = { .name = "tegra_idle", .owner = THIS_MODULE, - .en_core_tk_irqen = 1, + .states = { + ARM_CPUIDLE_WFI_STATE_PWR(600), +#ifdef CONFIG_PM_SLEEP + { + .enter = tegra20_idle_lp2_coupled, + .exit_latency = 5000, + .target_residency = 10000, + .power_usage = 0, + .flags = CPUIDLE_FLAG_TIME_VALID | + CPUIDLE_FLAG_COUPLED, + .name = "powered-down", + .desc = "CPU power gated", + }, +#endif + }, + .state_count = TEGRA20_MAX_STATES, + .safe_state_index = 0, }; -static DEFINE_PER_CPU(struct cpuidle_device, tegra_idle_device); - #ifdef CONFIG_PM_SLEEP #ifdef CONFIG_SMP static void __iomem *pmc = IO_ADDRESS(TEGRA_PMC_BASE); @@ -130,10 +131,6 @@ static bool tegra20_cpu_cluster_power_down(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) { - struct cpuidle_state *state = &drv->states[index]; - u32 cpu_on_time = state->exit_latency; - u32 cpu_off_time = state->target_residency - state->exit_latency; - while (tegra20_cpu_is_resettable_soon()) cpu_relax(); @@ -142,7 +139,7 @@ static bool tegra20_cpu_cluster_power_down(struct cpuidle_device *dev, clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &dev->cpu); - tegra_idle_lp2_last(cpu_on_time, cpu_off_time); + tegra_idle_lp2_last(); clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &dev->cpu); @@ -217,39 +214,8 @@ static int tegra20_idle_lp2_coupled(struct cpuidle_device *dev, int __init tegra20_cpuidle_init(void) { - int ret; - unsigned int cpu; - struct cpuidle_device *dev; - struct cpuidle_driver *drv = &tegra_idle_driver; - #ifdef CONFIG_PM_SLEEP tegra_tear_down_cpu = tegra20_tear_down_cpu; #endif - - drv->state_count = ARRAY_SIZE(tegra_idle_states); - memcpy(drv->states, tegra_idle_states, - drv->state_count * sizeof(drv->states[0])); - - ret = cpuidle_register_driver(&tegra_idle_driver); - if (ret) { - pr_err("CPUidle driver registration failed\n"); - return ret; - } - - for_each_possible_cpu(cpu) { - dev = &per_cpu(tegra_idle_device, cpu); - dev->cpu = cpu; -#ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED - dev->coupled_cpus = *cpu_possible_mask; -#endif - - dev->state_count = drv->state_count; - ret = cpuidle_register_device(dev); - if (ret) { - pr_err("CPU%u: CPUidle device registration failed\n", - cpu); - return ret; - } - } - return 0; + return cpuidle_register(&tegra_idle_driver, cpu_possible_mask); } diff --git a/arch/arm/mach-tegra/cpuidle-tegra30.c b/arch/arm/mach-tegra/cpuidle-tegra30.c index 8b50cf4ddd6f..3cf9aca5f3ea 100644 --- a/arch/arm/mach-tegra/cpuidle-tegra30.c +++ b/arch/arm/mach-tegra/cpuidle-tegra30.c @@ -43,7 +43,6 @@ static int tegra30_idle_lp2(struct cpuidle_device *dev, static struct cpuidle_driver tegra_idle_driver = { .name = "tegra_idle", .owner = THIS_MODULE, - .en_core_tk_irqen = 1, #ifdef CONFIG_PM_SLEEP .state_count = 2, #else @@ -65,17 +64,11 @@ static struct cpuidle_driver tegra_idle_driver = { }, }; -static DEFINE_PER_CPU(struct cpuidle_device, tegra_idle_device); - #ifdef CONFIG_PM_SLEEP static bool tegra30_cpu_cluster_power_down(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) { - struct cpuidle_state *state = &drv->states[index]; - u32 cpu_on_time = state->exit_latency; - u32 cpu_off_time = state->target_residency - state->exit_latency; - /* All CPUs entering LP2 is not working. * Don't let CPU0 enter LP2 when any secondary CPU is online. */ @@ -86,7 +79,7 @@ static bool tegra30_cpu_cluster_power_down(struct cpuidle_device *dev, clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &dev->cpu); - tegra_idle_lp2_last(cpu_on_time, cpu_off_time); + tegra_idle_lp2_last(); clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &dev->cpu); @@ -102,12 +95,8 @@ static bool tegra30_cpu_core_power_down(struct cpuidle_device *dev, smp_wmb(); - save_cpu_arch_register(); - cpu_suspend(0, tegra30_sleep_cpu_secondary_finish); - restore_cpu_arch_register(); - clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &dev->cpu); return true; @@ -157,32 +146,8 @@ static int tegra30_idle_lp2(struct cpuidle_device *dev, int __init tegra30_cpuidle_init(void) { - int ret; - unsigned int cpu; - struct cpuidle_device *dev; - struct cpuidle_driver *drv = &tegra_idle_driver; - #ifdef CONFIG_PM_SLEEP tegra_tear_down_cpu = tegra30_tear_down_cpu; #endif - - ret = cpuidle_register_driver(&tegra_idle_driver); - if (ret) { - pr_err("CPUidle driver registration failed\n"); - return ret; - } - - for_each_possible_cpu(cpu) { - dev = &per_cpu(tegra_idle_device, cpu); - dev->cpu = cpu; - - dev->state_count = drv->state_count; - ret = cpuidle_register_device(dev); - if (ret) { - pr_err("CPU%u: CPUidle device registration failed\n", - cpu); - return ret; - } - } - return 0; + return cpuidle_register(&tegra_idle_driver, NULL); } diff --git a/arch/arm/mach-tegra/fuse.c b/arch/arm/mach-tegra/fuse.c index f7db0782a6b6..e035cd284a6e 100644 --- a/arch/arm/mach-tegra/fuse.c +++ b/arch/arm/mach-tegra/fuse.c @@ -2,6 +2,7 @@ * arch/arm/mach-tegra/fuse.c * * Copyright (C) 2010 Google, Inc. + * Copyright (c) 2013, NVIDIA CORPORATION. All rights reserved. * * Author: * Colin Cross <ccross@android.com> @@ -137,6 +138,9 @@ void tegra_init_fuse(void) tegra_fuse_spare_bit = TEGRA30_FUSE_SPARE_BIT; tegra_init_speedo_data = &tegra30_init_speedo_data; break; + case TEGRA114: + tegra_init_speedo_data = &tegra114_init_speedo_data; + break; default: pr_warn("Tegra: unknown chip id %d\n", tegra_chip_id); tegra_fuse_spare_bit = TEGRA20_FUSE_SPARE_BIT; diff --git a/arch/arm/mach-tegra/fuse.h b/arch/arm/mach-tegra/fuse.h index da78434678c7..aacc00d05980 100644 --- a/arch/arm/mach-tegra/fuse.h +++ b/arch/arm/mach-tegra/fuse.h @@ -1,5 +1,6 @@ /* * Copyright (C) 2010 Google, Inc. + * Copyright (c) 2013, NVIDIA CORPORATION. All rights reserved. * * Author: * Colin Cross <ccross@android.com> @@ -66,4 +67,10 @@ void tegra30_init_speedo_data(void); static inline void tegra30_init_speedo_data(void) {} #endif +#ifdef CONFIG_ARCH_TEGRA_114_SOC +void tegra114_init_speedo_data(void); +#else +static inline void tegra114_init_speedo_data(void) {} +#endif + #endif diff --git a/arch/arm/mach-tegra/headsmp.S b/arch/arm/mach-tegra/headsmp.S index fd473f2b4c3d..045c16f2dd51 100644 --- a/arch/arm/mach-tegra/headsmp.S +++ b/arch/arm/mach-tegra/headsmp.S @@ -7,8 +7,5 @@ ENTRY(tegra_secondary_startup) bl v7_invalidate_l1 - /* Enable coresight */ - mov32 r0, 0xC5ACCE55 - mcr p14, 0, r0, c7, c12, 6 b secondary_startup ENDPROC(tegra_secondary_startup) diff --git a/arch/arm/mach-tegra/hotplug.c b/arch/arm/mach-tegra/hotplug.c index a599f6e36dea..184914a68d73 100644 --- a/arch/arm/mach-tegra/hotplug.c +++ b/arch/arm/mach-tegra/hotplug.c @@ -1,8 +1,7 @@ /* - * * Copyright (C) 2002 ARM Ltd. * All Rights Reserved - * Copyright (c) 2010, 2012 NVIDIA Corporation. All rights reserved. + * Copyright (c) 2010, 2012-2013, NVIDIA Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -12,9 +11,9 @@ #include <linux/smp.h> #include <linux/clk/tegra.h> -#include <asm/cacheflush.h> #include <asm/smp_plat.h> +#include "fuse.h" #include "sleep.h" static void (*tegra_hotplug_shutdown)(void); @@ -47,27 +46,13 @@ void __ref tegra_cpu_die(unsigned int cpu) BUG(); } -int tegra_cpu_disable(unsigned int cpu) -{ - /* - * we don't allow CPU 0 to be shutdown (it is still too special - * e.g. clock tick interrupts) - */ - return cpu == 0 ? -EPERM : 0; -} - -#ifdef CONFIG_ARCH_TEGRA_2x_SOC -extern void tegra20_hotplug_shutdown(void); -void __init tegra20_hotplug_init(void) +void __init tegra_hotplug_init(void) { - tegra_hotplug_shutdown = tegra20_hotplug_shutdown; -} -#endif + if (!IS_ENABLED(CONFIG_HOTPLUG_CPU)) + return; -#ifdef CONFIG_ARCH_TEGRA_3x_SOC -extern void tegra30_hotplug_shutdown(void); -void __init tegra30_hotplug_init(void) -{ - tegra_hotplug_shutdown = tegra30_hotplug_shutdown; + if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC) && tegra_chip_id == TEGRA20) + tegra_hotplug_shutdown = tegra20_hotplug_shutdown; + if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) && tegra_chip_id == TEGRA30) + tegra_hotplug_shutdown = tegra30_hotplug_shutdown; } -#endif diff --git a/arch/arm/mach-tegra/include/mach/powergate.h b/arch/arm/mach-tegra/include/mach/powergate.h deleted file mode 100644 index 06763fe7529d..000000000000 --- a/arch/arm/mach-tegra/include/mach/powergate.h +++ /dev/null @@ -1,54 +0,0 @@ -/* - * drivers/regulator/tegra-regulator.c - * - * Copyright (c) 2010 Google, Inc - * - * Author: - * Colin Cross <ccross@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef _MACH_TEGRA_POWERGATE_H_ -#define _MACH_TEGRA_POWERGATE_H_ - -struct clk; - -#define TEGRA_POWERGATE_CPU 0 -#define TEGRA_POWERGATE_3D 1 -#define TEGRA_POWERGATE_VENC 2 -#define TEGRA_POWERGATE_PCIE 3 -#define TEGRA_POWERGATE_VDEC 4 -#define TEGRA_POWERGATE_L2 5 -#define TEGRA_POWERGATE_MPE 6 -#define TEGRA_POWERGATE_HEG 7 -#define TEGRA_POWERGATE_SATA 8 -#define TEGRA_POWERGATE_CPU1 9 -#define TEGRA_POWERGATE_CPU2 10 -#define TEGRA_POWERGATE_CPU3 11 -#define TEGRA_POWERGATE_CELP 12 -#define TEGRA_POWERGATE_3D1 13 - -#define TEGRA_POWERGATE_CPU0 TEGRA_POWERGATE_CPU -#define TEGRA_POWERGATE_3D0 TEGRA_POWERGATE_3D - -int __init tegra_powergate_init(void); - -int tegra_cpu_powergate_id(int cpuid); -int tegra_powergate_is_powered(int id); -int tegra_powergate_power_on(int id); -int tegra_powergate_power_off(int id); -int tegra_powergate_remove_clamping(int id); - -/* Must be called with clk disabled, and returns with clk enabled */ -int tegra_powergate_sequence_power_up(int id, struct clk *clk); - -#endif /* _MACH_TEGRA_POWERGATE_H_ */ diff --git a/arch/arm/mach-tegra/include/mach/timex.h b/arch/arm/mach-tegra/include/mach/timex.h deleted file mode 100644 index a44ccbdb7dbf..000000000000 --- a/arch/arm/mach-tegra/include/mach/timex.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * arch/arm/mach-tegra/include/mach/timex.h - * - * Copyright (C) 2010 Google, Inc. - * - * Author: - * Colin Cross <ccross@google.com> - * Erik Gilling <konkers@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __MACH_TEGRA_TIMEX_H -#define __MACH_TEGRA_TIMEX_H - -#define CLOCK_TICK_RATE 1000000 - -#endif diff --git a/arch/arm/mach-tegra/include/mach/uncompress.h b/arch/arm/mach-tegra/include/mach/uncompress.h deleted file mode 100644 index 08386418196f..000000000000 --- a/arch/arm/mach-tegra/include/mach/uncompress.h +++ /dev/null @@ -1,175 +0,0 @@ -/* - * arch/arm/mach-tegra/include/mach/uncompress.h - * - * Copyright (C) 2010 Google, Inc. - * Copyright (C) 2011 Google, Inc. - * Copyright (C) 2011-2012 NVIDIA CORPORATION. All Rights Reserved. - * - * Author: - * Colin Cross <ccross@google.com> - * Erik Gilling <konkers@google.com> - * Doug Anderson <dianders@chromium.org> - * Stephen Warren <swarren@nvidia.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __MACH_TEGRA_UNCOMPRESS_H -#define __MACH_TEGRA_UNCOMPRESS_H - -#include <linux/types.h> -#include <linux/serial_reg.h> - -#include "../../iomap.h" - -#define BIT(x) (1 << (x)) -#define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0])) - -#define DEBUG_UART_SHIFT 2 - -volatile u8 *uart; - -static void putc(int c) -{ - if (uart == NULL) - return; - - while (!(uart[UART_LSR << DEBUG_UART_SHIFT] & UART_LSR_THRE)) - barrier(); - uart[UART_TX << DEBUG_UART_SHIFT] = c; -} - -static inline void flush(void) -{ -} - -static const struct { - u32 base; - u32 reset_reg; - u32 clock_reg; - u32 bit; -} uarts[] = { - { - TEGRA_UARTA_BASE, - TEGRA_CLK_RESET_BASE + 0x04, - TEGRA_CLK_RESET_BASE + 0x10, - 6, - }, - { - TEGRA_UARTB_BASE, - TEGRA_CLK_RESET_BASE + 0x04, - TEGRA_CLK_RESET_BASE + 0x10, - 7, - }, - { - TEGRA_UARTC_BASE, - TEGRA_CLK_RESET_BASE + 0x08, - TEGRA_CLK_RESET_BASE + 0x14, - 23, - }, - { - TEGRA_UARTD_BASE, - TEGRA_CLK_RESET_BASE + 0x0c, - TEGRA_CLK_RESET_BASE + 0x18, - 1, - }, - { - TEGRA_UARTE_BASE, - TEGRA_CLK_RESET_BASE + 0x0c, - TEGRA_CLK_RESET_BASE + 0x18, - 2, - }, -}; - -static inline bool uart_clocked(int i) -{ - if (*(u8 *)uarts[i].reset_reg & BIT(uarts[i].bit)) - return false; - - if (!(*(u8 *)uarts[i].clock_reg & BIT(uarts[i].bit))) - return false; - - return true; -} - -#ifdef CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA -int auto_odmdata(void) -{ - volatile u32 *pmc = (volatile u32 *)TEGRA_PMC_BASE; - u32 odmdata = pmc[0xa0 / 4]; - - /* - * Bits 19:18 are the console type: 0=default, 1=none, 2==DCC, 3==UART - * Some boards apparently swap the last two values, but we don't have - * any way of catering for that here, so we just accept either. If this - * doesn't make sense for your board, just don't enable this feature. - * - * Bits 17:15 indicate the UART to use, 0/1/2/3/4 are UART A/B/C/D/E. - */ - - switch ((odmdata >> 18) & 3) { - case 2: - case 3: - break; - default: - return -1; - } - - return (odmdata >> 15) & 7; -} -#endif - -/* - * Setup before decompression. This is where we do UART selection for - * earlyprintk and init the uart_base register. - */ -static inline void arch_decomp_setup(void) -{ - int uart_id; - volatile u32 *apb_misc = (volatile u32 *)TEGRA_APB_MISC_BASE; - u32 chip, div; - -#if defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA) - uart_id = auto_odmdata(); -#elif defined(CONFIG_TEGRA_DEBUG_UARTA) - uart_id = 0; -#elif defined(CONFIG_TEGRA_DEBUG_UARTB) - uart_id = 1; -#elif defined(CONFIG_TEGRA_DEBUG_UARTC) - uart_id = 2; -#elif defined(CONFIG_TEGRA_DEBUG_UARTD) - uart_id = 3; -#elif defined(CONFIG_TEGRA_DEBUG_UARTE) - uart_id = 4; -#endif - - if (uart_id < 0 || uart_id >= ARRAY_SIZE(uarts) || - !uart_clocked(uart_id)) - uart = NULL; - else - uart = (volatile u8 *)uarts[uart_id].base; - - if (uart == NULL) - return; - - chip = (apb_misc[0x804 / 4] >> 8) & 0xff; - if (chip == 0x20) - div = 0x0075; - else - div = 0x00dd; - - uart[UART_LCR << DEBUG_UART_SHIFT] |= UART_LCR_DLAB; - uart[UART_DLL << DEBUG_UART_SHIFT] = div & 0xff; - uart[UART_DLM << DEBUG_UART_SHIFT] = div >> 8; - uart[UART_LCR << DEBUG_UART_SHIFT] = 3; -} - -#endif diff --git a/arch/arm/mach-tegra/irq.c b/arch/arm/mach-tegra/irq.c index 1952e82797cc..0de4eed1493d 100644 --- a/arch/arm/mach-tegra/irq.c +++ b/arch/arm/mach-tegra/irq.c @@ -4,7 +4,7 @@ * Author: * Colin Cross <ccross@android.com> * - * Copyright (C) 2010, NVIDIA Corporation + * Copyright (C) 2010,2013, NVIDIA Corporation * * This software is licensed under the terms of the GNU General Public * License version 2, as published by the Free Software Foundation, and @@ -23,6 +23,7 @@ #include <linux/io.h> #include <linux/of.h> #include <linux/irqchip/arm-gic.h> +#include <linux/syscore_ops.h> #include "board.h" #include "iomap.h" @@ -43,6 +44,7 @@ #define ICTLR_COP_IEP_CLASS 0x3c #define FIRST_LEGACY_IRQ 32 +#define TEGRA_MAX_NUM_ICTLRS 5 #define SGI_MASK 0xFFFF @@ -56,6 +58,15 @@ static void __iomem *ictlr_reg_base[] = { IO_ADDRESS(TEGRA_QUINARY_ICTLR_BASE), }; +#ifdef CONFIG_PM_SLEEP +static u32 cop_ier[TEGRA_MAX_NUM_ICTLRS]; +static u32 cop_iep[TEGRA_MAX_NUM_ICTLRS]; +static u32 cpu_ier[TEGRA_MAX_NUM_ICTLRS]; +static u32 cpu_iep[TEGRA_MAX_NUM_ICTLRS]; + +static u32 ictlr_wake_mask[TEGRA_MAX_NUM_ICTLRS]; +#endif + bool tegra_pending_sgi(void) { u32 pending_set; @@ -125,6 +136,87 @@ static int tegra_retrigger(struct irq_data *d) return 1; } +#ifdef CONFIG_PM_SLEEP +static int tegra_set_wake(struct irq_data *d, unsigned int enable) +{ + u32 irq = d->irq; + u32 index, mask; + + if (irq < FIRST_LEGACY_IRQ || + irq >= FIRST_LEGACY_IRQ + num_ictlrs * 32) + return -EINVAL; + + index = ((irq - FIRST_LEGACY_IRQ) / 32); + mask = BIT((irq - FIRST_LEGACY_IRQ) % 32); + if (enable) + ictlr_wake_mask[index] |= mask; + else + ictlr_wake_mask[index] &= ~mask; + + return 0; +} + +static int tegra_legacy_irq_suspend(void) +{ + unsigned long flags; + int i; + + local_irq_save(flags); + for (i = 0; i < num_ictlrs; i++) { + void __iomem *ictlr = ictlr_reg_base[i]; + /* Save interrupt state */ + cpu_ier[i] = readl_relaxed(ictlr + ICTLR_CPU_IER); + cpu_iep[i] = readl_relaxed(ictlr + ICTLR_CPU_IEP_CLASS); + cop_ier[i] = readl_relaxed(ictlr + ICTLR_COP_IER); + cop_iep[i] = readl_relaxed(ictlr + ICTLR_COP_IEP_CLASS); + + /* Disable COP interrupts */ + writel_relaxed(~0ul, ictlr + ICTLR_COP_IER_CLR); + + /* Disable CPU interrupts */ + writel_relaxed(~0ul, ictlr + ICTLR_CPU_IER_CLR); + + /* Enable the wakeup sources of ictlr */ + writel_relaxed(ictlr_wake_mask[i], ictlr + ICTLR_CPU_IER_SET); + } + local_irq_restore(flags); + + return 0; +} + +static void tegra_legacy_irq_resume(void) +{ + unsigned long flags; + int i; + + local_irq_save(flags); + for (i = 0; i < num_ictlrs; i++) { + void __iomem *ictlr = ictlr_reg_base[i]; + writel_relaxed(cpu_iep[i], ictlr + ICTLR_CPU_IEP_CLASS); + writel_relaxed(~0ul, ictlr + ICTLR_CPU_IER_CLR); + writel_relaxed(cpu_ier[i], ictlr + ICTLR_CPU_IER_SET); + writel_relaxed(cop_iep[i], ictlr + ICTLR_COP_IEP_CLASS); + writel_relaxed(~0ul, ictlr + ICTLR_COP_IER_CLR); + writel_relaxed(cop_ier[i], ictlr + ICTLR_COP_IER_SET); + } + local_irq_restore(flags); +} + +static struct syscore_ops tegra_legacy_irq_syscore_ops = { + .suspend = tegra_legacy_irq_suspend, + .resume = tegra_legacy_irq_resume, +}; + +int tegra_legacy_irq_syscore_init(void) +{ + register_syscore_ops(&tegra_legacy_irq_syscore_ops); + + return 0; +} +#else +#define tegra_set_wake NULL +#endif + void __init tegra_init_irq(void) { int i; @@ -150,6 +242,8 @@ void __init tegra_init_irq(void) gic_arch_extn.irq_mask = tegra_mask; gic_arch_extn.irq_unmask = tegra_unmask; gic_arch_extn.irq_retrigger = tegra_retrigger; + gic_arch_extn.irq_set_wake = tegra_set_wake; + gic_arch_extn.flags = IRQCHIP_MASK_ON_SUSPEND; /* * Check if there is a devicetree present, since the GIC will be diff --git a/arch/arm/mach-tegra/irq.h b/arch/arm/mach-tegra/irq.h index 5142649bba05..bc05ce5613fb 100644 --- a/arch/arm/mach-tegra/irq.h +++ b/arch/arm/mach-tegra/irq.h @@ -19,4 +19,10 @@ bool tegra_pending_sgi(void); +#ifdef CONFIG_PM_SLEEP +int tegra_legacy_irq_syscore_init(void); +#else +static inline int tegra_legacy_irq_syscore_init(void) { return 0; } +#endif + #endif diff --git a/arch/arm/mach-tegra/pcie.c b/arch/arm/mach-tegra/pcie.c index b60165f1ca02..46144a19a7e7 100644 --- a/arch/arm/mach-tegra/pcie.c +++ b/arch/arm/mach-tegra/pcie.c @@ -34,12 +34,11 @@ #include <linux/delay.h> #include <linux/export.h> #include <linux/clk/tegra.h> +#include <linux/tegra-powergate.h> #include <asm/sizes.h> #include <asm/mach/pci.h> -#include <mach/powergate.h> - #include "board.h" #include "iomap.h" diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c index 2c6b3d55213b..fad4226ef710 100644 --- a/arch/arm/mach-tegra/platsmp.c +++ b/arch/arm/mach-tegra/platsmp.c @@ -18,7 +18,6 @@ #include <linux/jiffies.h> #include <linux/smp.h> #include <linux/io.h> -#include <linux/irqchip/arm-gic.h> #include <linux/clk/tegra.h> #include <asm/cacheflush.h> @@ -26,53 +25,58 @@ #include <asm/smp_scu.h> #include <asm/smp_plat.h> -#include <mach/powergate.h> - #include "fuse.h" #include "flowctrl.h" #include "reset.h" +#include "pmc.h" #include "common.h" #include "iomap.h" -extern void tegra_secondary_startup(void); - static cpumask_t tegra_cpu_init_mask; -#define EVP_CPU_RESET_VECTOR \ - (IO_ADDRESS(TEGRA_EXCEPTION_VECTORS_BASE) + 0x100) - static void __cpuinit tegra_secondary_init(unsigned int cpu) { - /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); - cpumask_set_cpu(cpu, &tegra_cpu_init_mask); } -static int tegra20_power_up_cpu(unsigned int cpu) + +static int tegra20_boot_secondary(unsigned int cpu, struct task_struct *idle) { - /* Enable the CPU clock. */ - tegra_enable_cpu_clock(cpu); + cpu = cpu_logical_map(cpu); + + /* + * Force the CPU into reset. The CPU must remain in reset when + * the flow controller state is cleared (which will cause the + * flow controller to stop driving reset if the CPU has been + * power-gated via the flow controller). This will have no + * effect on first boot of the CPU since it should already be + * in reset. + */ + tegra_put_cpu_in_reset(cpu); - /* Clear flow controller CSR. */ - flowctrl_write_cpu_csr(cpu, 0); + /* + * Unhalt the CPU. If the flow controller was used to + * power-gate the CPU this will cause the flow controller to + * stop driving reset. The CPU will remain in reset because the + * clock and reset block is now driving reset. + */ + flowctrl_write_cpu_halt(cpu, 0); + tegra_enable_cpu_clock(cpu); + flowctrl_write_cpu_csr(cpu, 0); /* Clear flow controller CSR. */ + tegra_cpu_out_of_reset(cpu); return 0; } -static int tegra30_power_up_cpu(unsigned int cpu) +static int tegra30_boot_secondary(unsigned int cpu, struct task_struct *idle) { - int ret, pwrgateid; + int ret; unsigned long timeout; - pwrgateid = tegra_cpu_powergate_id(cpu); - if (pwrgateid < 0) - return pwrgateid; + cpu = cpu_logical_map(cpu); + tegra_put_cpu_in_reset(cpu); + flowctrl_write_cpu_halt(cpu, 0); /* * The power up sequence of cold boot CPU and warm boot CPU @@ -85,13 +89,13 @@ static int tegra30_power_up_cpu(unsigned int cpu) * the IO clamps. * For cold boot CPU, do not wait. After the cold boot CPU be * booted, it will run to tegra_secondary_init() and set - * tegra_cpu_init_mask which influences what tegra30_power_up_cpu() + * tegra_cpu_init_mask which influences what tegra30_boot_secondary() * next time around. */ if (cpumask_test_cpu(cpu, &tegra_cpu_init_mask)) { timeout = jiffies + msecs_to_jiffies(50); do { - if (!tegra_powergate_is_powered(pwrgateid)) + if (tegra_pmc_cpu_is_powered(cpu)) goto remove_clamps; udelay(10); } while (time_before(jiffies, timeout)); @@ -103,14 +107,14 @@ static int tegra30_power_up_cpu(unsigned int cpu) * be un-gated by un-toggling the power gate register * manually. */ - if (!tegra_powergate_is_powered(pwrgateid)) { - ret = tegra_powergate_power_on(pwrgateid); + if (!tegra_pmc_cpu_is_powered(cpu)) { + ret = tegra_pmc_cpu_power_on(cpu); if (ret) return ret; /* Wait for the power to come up. */ timeout = jiffies + msecs_to_jiffies(100); - while (tegra_powergate_is_powered(pwrgateid)) { + while (tegra_pmc_cpu_is_powered(cpu)) { if (time_after(jiffies, timeout)) return -ETIMEDOUT; udelay(10); @@ -123,57 +127,34 @@ remove_clamps: udelay(10); /* Remove I/O clamps. */ - ret = tegra_powergate_remove_clamping(pwrgateid); - udelay(10); + ret = tegra_pmc_cpu_remove_clamping(cpu); + if (ret) + return ret; - /* Clear flow controller CSR. */ - flowctrl_write_cpu_csr(cpu, 0); + udelay(10); + flowctrl_write_cpu_csr(cpu, 0); /* Clear flow controller CSR. */ + tegra_cpu_out_of_reset(cpu); return 0; } -static int __cpuinit tegra_boot_secondary(unsigned int cpu, struct task_struct *idle) +static int tegra114_boot_secondary(unsigned int cpu, struct task_struct *idle) { - int status; - cpu = cpu_logical_map(cpu); + return tegra_pmc_cpu_power_on(cpu); +} - /* - * Force the CPU into reset. The CPU must remain in reset when the - * flow controller state is cleared (which will cause the flow - * controller to stop driving reset if the CPU has been power-gated - * via the flow controller). This will have no effect on first boot - * of the CPU since it should already be in reset. - */ - tegra_put_cpu_in_reset(cpu); - - /* - * Unhalt the CPU. If the flow controller was used to power-gate the - * CPU this will cause the flow controller to stop driving reset. - * The CPU will remain in reset because the clock and reset block - * is now driving reset. - */ - flowctrl_write_cpu_halt(cpu, 0); - - switch (tegra_chip_id) { - case TEGRA20: - status = tegra20_power_up_cpu(cpu); - break; - case TEGRA30: - status = tegra30_power_up_cpu(cpu); - break; - default: - status = -EINVAL; - break; - } - - if (status) - goto done; - - /* Take the CPU out of reset. */ - tegra_cpu_out_of_reset(cpu); -done: - return status; +static int __cpuinit tegra_boot_secondary(unsigned int cpu, + struct task_struct *idle) +{ + if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC) && tegra_chip_id == TEGRA20) + return tegra20_boot_secondary(cpu, idle); + if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) && tegra_chip_id == TEGRA30) + return tegra30_boot_secondary(cpu, idle); + if (IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) && tegra_chip_id == TEGRA114) + return tegra114_boot_secondary(cpu, idle); + + return -EINVAL; } static void __init tegra_smp_prepare_cpus(unsigned int max_cpus) @@ -192,6 +173,5 @@ struct smp_operations tegra_smp_ops __initdata = { #ifdef CONFIG_HOTPLUG_CPU .cpu_kill = tegra_cpu_kill, .cpu_die = tegra_cpu_die, - .cpu_disable = tegra_cpu_disable, #endif }; diff --git a/arch/arm/mach-tegra/pm.c b/arch/arm/mach-tegra/pm.c index 523604de666f..45cf52c7e528 100644 --- a/arch/arm/mach-tegra/pm.c +++ b/arch/arm/mach-tegra/pm.c @@ -22,7 +22,7 @@ #include <linux/cpumask.h> #include <linux/delay.h> #include <linux/cpu_pm.h> -#include <linux/clk.h> +#include <linux/suspend.h> #include <linux/err.h> #include <linux/clk/tegra.h> @@ -37,67 +37,13 @@ #include "reset.h" #include "flowctrl.h" #include "fuse.h" +#include "pmc.h" #include "sleep.h" -#define TEGRA_POWER_CPU_PWRREQ_OE (1 << 16) /* CPU pwr req enable */ - -#define PMC_CTRL 0x0 -#define PMC_CPUPWRGOOD_TIMER 0xc8 -#define PMC_CPUPWROFF_TIMER 0xcc - #ifdef CONFIG_PM_SLEEP -static unsigned int g_diag_reg; static DEFINE_SPINLOCK(tegra_lp2_lock); -static void __iomem *pmc = IO_ADDRESS(TEGRA_PMC_BASE); -static struct clk *tegra_pclk; void (*tegra_tear_down_cpu)(void); -void save_cpu_arch_register(void) -{ - /* read diagnostic register */ - asm("mrc p15, 0, %0, c15, c0, 1" : "=r"(g_diag_reg) : : "cc"); - return; -} - -void restore_cpu_arch_register(void) -{ - /* write diagnostic register */ - asm("mcr p15, 0, %0, c15, c0, 1" : : "r"(g_diag_reg) : "cc"); - return; -} - -static void set_power_timers(unsigned long us_on, unsigned long us_off) -{ - unsigned long long ticks; - unsigned long long pclk; - unsigned long rate; - static unsigned long tegra_last_pclk; - - if (tegra_pclk == NULL) { - tegra_pclk = clk_get_sys(NULL, "pclk"); - WARN_ON(IS_ERR(tegra_pclk)); - } - - rate = clk_get_rate(tegra_pclk); - - if (WARN_ON_ONCE(rate <= 0)) - pclk = 100000000; - else - pclk = rate; - - if ((rate != tegra_last_pclk)) { - ticks = (us_on * pclk) + 999999ull; - do_div(ticks, 1000000); - writel((unsigned long)ticks, pmc + PMC_CPUPWRGOOD_TIMER); - - ticks = (us_off * pclk) + 999999ull; - do_div(ticks, 1000000); - writel((unsigned long)ticks, pmc + PMC_CPUPWROFF_TIMER); - wmb(); - } - tegra_last_pclk = pclk; -} - /* * restore_cpu_complex * @@ -119,8 +65,6 @@ static void restore_cpu_complex(void) tegra_cpu_clock_resume(); flowctrl_cpu_suspend_exit(cpu); - - restore_cpu_arch_register(); } /* @@ -145,8 +89,6 @@ static void suspend_cpu_complex(void) tegra_cpu_clock_suspend(); flowctrl_cpu_suspend_enter(cpu); - - save_cpu_arch_register(); } void tegra_clear_cpu_in_lp2(int phy_cpu_id) @@ -181,14 +123,14 @@ bool tegra_set_cpu_in_lp2(int phy_cpu_id) return last_cpu; } -static int tegra_sleep_cpu(unsigned long v2p) +int tegra_cpu_do_idle(void) { - /* Switch to the identity mapping. */ - cpu_switch_mm(idmap_pgd, &init_mm); - - /* Flush the TLB. */ - local_flush_tlb_all(); + return cpu_do_idle(); +} +static int tegra_sleep_cpu(unsigned long v2p) +{ + setup_mm_for_reboot(); tegra_sleep_cpu_finish(v2p); /* should never here */ @@ -197,16 +139,9 @@ static int tegra_sleep_cpu(unsigned long v2p) return 0; } -void tegra_idle_lp2_last(u32 cpu_on_time, u32 cpu_off_time) +void tegra_idle_lp2_last(void) { - u32 mode; - - /* Only the last cpu down does the final suspend steps */ - mode = readl(pmc + PMC_CTRL); - mode |= TEGRA_POWER_CPU_PWRREQ_OE; - writel(mode, pmc + PMC_CTRL); - - set_power_timers(cpu_on_time, cpu_off_time); + tegra_pmc_pm_set(TEGRA_SUSPEND_LP2); cpu_cluster_pm_enter(); suspend_cpu_complex(); @@ -216,4 +151,81 @@ void tegra_idle_lp2_last(u32 cpu_on_time, u32 cpu_off_time) restore_cpu_complex(); cpu_cluster_pm_exit(); } + +enum tegra_suspend_mode tegra_pm_validate_suspend_mode( + enum tegra_suspend_mode mode) +{ + /* Tegra114 didn't support any suspending mode yet. */ + if (tegra_chip_id == TEGRA114) + return TEGRA_SUSPEND_NONE; + + /* + * The Tegra devices only support suspending to LP2 currently. + */ + if (mode > TEGRA_SUSPEND_LP2) + return TEGRA_SUSPEND_LP2; + + return mode; +} + +static const char *lp_state[TEGRA_MAX_SUSPEND_MODE] = { + [TEGRA_SUSPEND_NONE] = "none", + [TEGRA_SUSPEND_LP2] = "LP2", + [TEGRA_SUSPEND_LP1] = "LP1", + [TEGRA_SUSPEND_LP0] = "LP0", +}; + +static int __cpuinit tegra_suspend_enter(suspend_state_t state) +{ + enum tegra_suspend_mode mode = tegra_pmc_get_suspend_mode(); + + if (WARN_ON(mode < TEGRA_SUSPEND_NONE || + mode >= TEGRA_MAX_SUSPEND_MODE)) + return -EINVAL; + + pr_info("Entering suspend state %s\n", lp_state[mode]); + + tegra_pmc_pm_set(mode); + + local_fiq_disable(); + + suspend_cpu_complex(); + switch (mode) { + case TEGRA_SUSPEND_LP2: + tegra_set_cpu_in_lp2(0); + break; + default: + break; + } + + cpu_suspend(PHYS_OFFSET - PAGE_OFFSET, &tegra_sleep_cpu); + + switch (mode) { + case TEGRA_SUSPEND_LP2: + tegra_clear_cpu_in_lp2(0); + break; + default: + break; + } + restore_cpu_complex(); + + local_fiq_enable(); + + return 0; +} + +static const struct platform_suspend_ops tegra_suspend_ops = { + .valid = suspend_valid_only_mem, + .enter = tegra_suspend_enter, +}; + +void __init tegra_init_suspend(void) +{ + if (tegra_pmc_get_suspend_mode() == TEGRA_SUSPEND_NONE) + return; + + tegra_pmc_suspend_init(); + + suspend_set_ops(&tegra_suspend_ops); +} #endif diff --git a/arch/arm/mach-tegra/pm.h b/arch/arm/mach-tegra/pm.h index 787335cc964c..778a4aa7c3fa 100644 --- a/arch/arm/mach-tegra/pm.h +++ b/arch/arm/mach-tegra/pm.h @@ -21,6 +21,8 @@ #ifndef _MACH_TEGRA_PM_H_ #define _MACH_TEGRA_PM_H_ +#include "pmc.h" + extern unsigned long l2x0_saved_regs_addr; void save_cpu_arch_register(void); @@ -29,7 +31,20 @@ void restore_cpu_arch_register(void); void tegra_clear_cpu_in_lp2(int phy_cpu_id); bool tegra_set_cpu_in_lp2(int phy_cpu_id); -void tegra_idle_lp2_last(u32 cpu_on_time, u32 cpu_off_time); +void tegra_idle_lp2_last(void); extern void (*tegra_tear_down_cpu)(void); +#ifdef CONFIG_PM_SLEEP +enum tegra_suspend_mode tegra_pm_validate_suspend_mode( + enum tegra_suspend_mode mode); +void tegra_init_suspend(void); +#else +static inline enum tegra_suspend_mode tegra_pm_validate_suspend_mode( + enum tegra_suspend_mode mode) +{ + return TEGRA_SUSPEND_NONE; +} +static inline void tegra_init_suspend(void) {} +#endif + #endif /* _MACH_TEGRA_PM_H_ */ diff --git a/arch/arm/mach-tegra/pmc.c b/arch/arm/mach-tegra/pmc.c index d4fdb5fcec20..32360e540ce6 100644 --- a/arch/arm/mach-tegra/pmc.c +++ b/arch/arm/mach-tegra/pmc.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2012 NVIDIA CORPORATION. All rights reserved. + * Copyright (C) 2012,2013 NVIDIA CORPORATION. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, @@ -16,59 +16,313 @@ */ #include <linux/kernel.h> +#include <linux/clk.h> #include <linux/io.h> #include <linux/of.h> +#include <linux/of_address.h> -#include "iomap.h" +#include "fuse.h" +#include "pm.h" +#include "pmc.h" +#include "sleep.h" -#define PMC_CTRL 0x0 -#define PMC_CTRL_INTR_LOW (1 << 17) +#define TEGRA_POWER_EFFECT_LP0 (1 << 14) /* LP0 when CPU pwr gated */ +#define TEGRA_POWER_CPU_PWRREQ_POLARITY (1 << 15) /* CPU pwr req polarity */ +#define TEGRA_POWER_CPU_PWRREQ_OE (1 << 16) /* CPU pwr req enable */ + +#define PMC_CTRL 0x0 +#define PMC_CTRL_INTR_LOW (1 << 17) +#define PMC_PWRGATE_TOGGLE 0x30 +#define PMC_PWRGATE_TOGGLE_START (1 << 8) +#define PMC_REMOVE_CLAMPING 0x34 +#define PMC_PWRGATE_STATUS 0x38 + +#define PMC_CPUPWRGOOD_TIMER 0xc8 +#define PMC_CPUPWROFF_TIMER 0xcc + +#define TEGRA_POWERGATE_PCIE 3 +#define TEGRA_POWERGATE_VDEC 4 +#define TEGRA_POWERGATE_CPU1 9 +#define TEGRA_POWERGATE_CPU2 10 +#define TEGRA_POWERGATE_CPU3 11 + +static u8 tegra_cpu_domains[] = { + 0xFF, /* not available for CPU0 */ + TEGRA_POWERGATE_CPU1, + TEGRA_POWERGATE_CPU2, + TEGRA_POWERGATE_CPU3, +}; +static DEFINE_SPINLOCK(tegra_powergate_lock); + +static void __iomem *tegra_pmc_base; +static bool tegra_pmc_invert_interrupt; +static struct clk *tegra_pclk; + +struct pmc_pm_data { + u32 cpu_good_time; /* CPU power good time in uS */ + u32 cpu_off_time; /* CPU power off time in uS */ + u32 core_osc_time; /* Core power good osc time in uS */ + u32 core_pmu_time; /* Core power good pmu time in uS */ + u32 core_off_time; /* Core power off time in uS */ + bool corereq_high; /* Core power request active-high */ + bool sysclkreq_high; /* System clock request active-high */ + bool combined_req; /* Combined pwr req for CPU & Core */ + bool cpu_pwr_good_en; /* CPU power good signal is enabled */ + u32 lp0_vec_phy_addr; /* The phy addr of LP0 warm boot code */ + u32 lp0_vec_size; /* The size of LP0 warm boot code */ + enum tegra_suspend_mode suspend_mode; +}; +static struct pmc_pm_data pmc_pm_data; static inline u32 tegra_pmc_readl(u32 reg) { - return readl(IO_ADDRESS(TEGRA_PMC_BASE + reg)); + return readl(tegra_pmc_base + reg); } static inline void tegra_pmc_writel(u32 val, u32 reg) { - writel(val, IO_ADDRESS(TEGRA_PMC_BASE + reg)); + writel(val, tegra_pmc_base + reg); +} + +static int tegra_pmc_get_cpu_powerdomain_id(int cpuid) +{ + if (cpuid <= 0 || cpuid >= num_possible_cpus()) + return -EINVAL; + return tegra_cpu_domains[cpuid]; +} + +static bool tegra_pmc_powergate_is_powered(int id) +{ + return (tegra_pmc_readl(PMC_PWRGATE_STATUS) >> id) & 1; +} + +static int tegra_pmc_powergate_set(int id, bool new_state) +{ + bool old_state; + unsigned long flags; + + spin_lock_irqsave(&tegra_powergate_lock, flags); + + old_state = tegra_pmc_powergate_is_powered(id); + WARN_ON(old_state == new_state); + + tegra_pmc_writel(PMC_PWRGATE_TOGGLE_START | id, PMC_PWRGATE_TOGGLE); + + spin_unlock_irqrestore(&tegra_powergate_lock, flags); + + return 0; +} + +static int tegra_pmc_powergate_remove_clamping(int id) +{ + u32 mask; + + /* + * Tegra has a bug where PCIE and VDE clamping masks are + * swapped relatively to the partition ids. + */ + if (id == TEGRA_POWERGATE_VDEC) + mask = (1 << TEGRA_POWERGATE_PCIE); + else if (id == TEGRA_POWERGATE_PCIE) + mask = (1 << TEGRA_POWERGATE_VDEC); + else + mask = (1 << id); + + tegra_pmc_writel(mask, PMC_REMOVE_CLAMPING); + + return 0; +} + +bool tegra_pmc_cpu_is_powered(int cpuid) +{ + int id; + + id = tegra_pmc_get_cpu_powerdomain_id(cpuid); + if (id < 0) + return false; + return tegra_pmc_powergate_is_powered(id); } -#ifdef CONFIG_OF +int tegra_pmc_cpu_power_on(int cpuid) +{ + int id; + + id = tegra_pmc_get_cpu_powerdomain_id(cpuid); + if (id < 0) + return id; + return tegra_pmc_powergate_set(id, true); +} + +int tegra_pmc_cpu_remove_clamping(int cpuid) +{ + int id; + + id = tegra_pmc_get_cpu_powerdomain_id(cpuid); + if (id < 0) + return id; + return tegra_pmc_powergate_remove_clamping(id); +} + +#ifdef CONFIG_PM_SLEEP +static void set_power_timers(u32 us_on, u32 us_off, unsigned long rate) +{ + unsigned long long ticks; + unsigned long long pclk; + static unsigned long tegra_last_pclk; + + if (WARN_ON_ONCE(rate <= 0)) + pclk = 100000000; + else + pclk = rate; + + if ((rate != tegra_last_pclk)) { + ticks = (us_on * pclk) + 999999ull; + do_div(ticks, 1000000); + tegra_pmc_writel((unsigned long)ticks, PMC_CPUPWRGOOD_TIMER); + + ticks = (us_off * pclk) + 999999ull; + do_div(ticks, 1000000); + tegra_pmc_writel((unsigned long)ticks, PMC_CPUPWROFF_TIMER); + wmb(); + } + tegra_last_pclk = pclk; +} + +enum tegra_suspend_mode tegra_pmc_get_suspend_mode(void) +{ + return pmc_pm_data.suspend_mode; +} + +void tegra_pmc_pm_set(enum tegra_suspend_mode mode) +{ + u32 reg; + unsigned long rate = 0; + + reg = tegra_pmc_readl(PMC_CTRL); + reg |= TEGRA_POWER_CPU_PWRREQ_OE; + reg &= ~TEGRA_POWER_EFFECT_LP0; + + switch (mode) { + case TEGRA_SUSPEND_LP2: + rate = clk_get_rate(tegra_pclk); + break; + default: + break; + } + + set_power_timers(pmc_pm_data.cpu_good_time, pmc_pm_data.cpu_off_time, + rate); + + tegra_pmc_writel(reg, PMC_CTRL); +} + +void tegra_pmc_suspend_init(void) +{ + u32 reg; + + /* Always enable CPU power request */ + reg = tegra_pmc_readl(PMC_CTRL); + reg |= TEGRA_POWER_CPU_PWRREQ_OE; + tegra_pmc_writel(reg, PMC_CTRL); +} +#endif + static const struct of_device_id matches[] __initconst = { + { .compatible = "nvidia,tegra114-pmc" }, + { .compatible = "nvidia,tegra30-pmc" }, { .compatible = "nvidia,tegra20-pmc" }, { } }; -#endif -void __init tegra_pmc_init(void) +static void tegra_pmc_parse_dt(void) { - /* - * For now, Harmony is the only board that uses the PMC, and it wants - * the signal inverted. Seaboard would too if it used the PMC. - * Hopefully by the time other boards want to use the PMC, everything - * will be device-tree, or they also want it inverted. - */ - bool invert_interrupt = true; - u32 val; + struct device_node *np; + u32 prop; + enum tegra_suspend_mode suspend_mode; + u32 core_good_time[2] = {0, 0}; + u32 lp0_vec[2] = {0, 0}; -#ifdef CONFIG_OF - if (of_have_populated_dt()) { - struct device_node *np; + np = of_find_matching_node(NULL, matches); + BUG_ON(!np); - invert_interrupt = false; + tegra_pmc_base = of_iomap(np, 0); - np = of_find_matching_node(NULL, matches); - if (np) { - if (of_find_property(np, "nvidia,invert-interrupt", - NULL)) - invert_interrupt = true; + tegra_pmc_invert_interrupt = of_property_read_bool(np, + "nvidia,invert-interrupt"); + tegra_pclk = of_clk_get_by_name(np, "pclk"); + WARN_ON(IS_ERR(tegra_pclk)); + + /* Grabbing the power management configurations */ + if (of_property_read_u32(np, "nvidia,suspend-mode", &prop)) { + suspend_mode = TEGRA_SUSPEND_NONE; + } else { + switch (prop) { + case 0: + suspend_mode = TEGRA_SUSPEND_LP0; + break; + case 1: + suspend_mode = TEGRA_SUSPEND_LP1; + break; + case 2: + suspend_mode = TEGRA_SUSPEND_LP2; + break; + default: + suspend_mode = TEGRA_SUSPEND_NONE; + break; } } -#endif + suspend_mode = tegra_pm_validate_suspend_mode(suspend_mode); + + if (of_property_read_u32(np, "nvidia,cpu-pwr-good-time", &prop)) + suspend_mode = TEGRA_SUSPEND_NONE; + pmc_pm_data.cpu_good_time = prop; + + if (of_property_read_u32(np, "nvidia,cpu-pwr-off-time", &prop)) + suspend_mode = TEGRA_SUSPEND_NONE; + pmc_pm_data.cpu_off_time = prop; + + if (of_property_read_u32_array(np, "nvidia,core-pwr-good-time", + core_good_time, ARRAY_SIZE(core_good_time))) + suspend_mode = TEGRA_SUSPEND_NONE; + pmc_pm_data.core_osc_time = core_good_time[0]; + pmc_pm_data.core_pmu_time = core_good_time[1]; + + if (of_property_read_u32(np, "nvidia,core-pwr-off-time", + &prop)) + suspend_mode = TEGRA_SUSPEND_NONE; + pmc_pm_data.core_off_time = prop; + + pmc_pm_data.corereq_high = of_property_read_bool(np, + "nvidia,core-power-req-active-high"); + + pmc_pm_data.sysclkreq_high = of_property_read_bool(np, + "nvidia,sys-clock-req-active-high"); + + pmc_pm_data.combined_req = of_property_read_bool(np, + "nvidia,combined-power-req"); + + pmc_pm_data.cpu_pwr_good_en = of_property_read_bool(np, + "nvidia,cpu-pwr-good-en"); + + if (of_property_read_u32_array(np, "nvidia,lp0-vec", lp0_vec, + ARRAY_SIZE(lp0_vec))) + if (suspend_mode == TEGRA_SUSPEND_LP0) + suspend_mode = TEGRA_SUSPEND_LP1; + + pmc_pm_data.lp0_vec_phy_addr = lp0_vec[0]; + pmc_pm_data.lp0_vec_size = lp0_vec[1]; + + pmc_pm_data.suspend_mode = suspend_mode; +} + +void __init tegra_pmc_init(void) +{ + u32 val; + + tegra_pmc_parse_dt(); val = tegra_pmc_readl(PMC_CTRL); - if (invert_interrupt) + if (tegra_pmc_invert_interrupt) val |= PMC_CTRL_INTR_LOW; else val &= ~PMC_CTRL_INTR_LOW; diff --git a/arch/arm/mach-tegra/pmc.h b/arch/arm/mach-tegra/pmc.h index 8995ee4a8768..e1c2df272f7d 100644 --- a/arch/arm/mach-tegra/pmc.h +++ b/arch/arm/mach-tegra/pmc.h @@ -18,6 +18,24 @@ #ifndef __MACH_TEGRA_PMC_H #define __MACH_TEGRA_PMC_H +enum tegra_suspend_mode { + TEGRA_SUSPEND_NONE = 0, + TEGRA_SUSPEND_LP2, /* CPU voltage off */ + TEGRA_SUSPEND_LP1, /* CPU voltage off, DRAM self-refresh */ + TEGRA_SUSPEND_LP0, /* CPU + core voltage off, DRAM self-refresh */ + TEGRA_MAX_SUSPEND_MODE, +}; + +#ifdef CONFIG_PM_SLEEP +enum tegra_suspend_mode tegra_pmc_get_suspend_mode(void); +void tegra_pmc_pm_set(enum tegra_suspend_mode mode); +void tegra_pmc_suspend_init(void); +#endif + +bool tegra_pmc_cpu_is_powered(int cpuid); +int tegra_pmc_cpu_power_on(int cpuid); +int tegra_pmc_cpu_remove_clamping(int cpuid); + void tegra_pmc_init(void); #endif diff --git a/arch/arm/mach-tegra/powergate.c b/arch/arm/mach-tegra/powergate.c index c6bc8f85759c..f076f0f80fcd 100644 --- a/arch/arm/mach-tegra/powergate.c +++ b/arch/arm/mach-tegra/powergate.c @@ -22,13 +22,13 @@ #include <linux/debugfs.h> #include <linux/delay.h> #include <linux/err.h> +#include <linux/export.h> #include <linux/init.h> #include <linux/io.h> #include <linux/seq_file.h> #include <linux/spinlock.h> #include <linux/clk/tegra.h> - -#include <mach/powergate.h> +#include <linux/tegra-powergate.h> #include "fuse.h" #include "iomap.h" @@ -75,7 +75,7 @@ static int tegra_powergate_set(int id, bool new_state) if (status == new_state) { spin_unlock_irqrestore(&tegra_powergate_lock, flags); - return -EINVAL; + return 0; } pmc_write(PWRGATE_TOGGLE_START | id, PWRGATE_TOGGLE); @@ -168,6 +168,7 @@ err_clk: err_power: return ret; } +EXPORT_SYMBOL(tegra_powergate_sequence_power_up); int tegra_cpu_powergate_id(int cpuid) { diff --git a/arch/arm/mach-tegra/reset-handler.S b/arch/arm/mach-tegra/reset-handler.S index 54382ceade4a..e6de88a2ea06 100644 --- a/arch/arm/mach-tegra/reset-handler.S +++ b/arch/arm/mach-tegra/reset-handler.S @@ -41,12 +41,10 @@ */ ENTRY(tegra_resume) bl v7_invalidate_l1 - /* Enable coresight */ - mov32 r0, 0xC5ACCE55 - mcr p14, 0, r0, c7, c12, 6 cpu_id r0 cmp r0, #0 @ CPU0? + THUMB( it ne ) bne cpu_resume @ no #ifdef CONFIG_ARCH_TEGRA_3x_SOC @@ -99,6 +97,8 @@ ENTRY(__tegra_cpu_reset_handler_start) * * Register usage within the reset handler: * + * Others: scratch + * R6 = SoC ID << 8 * R7 = CPU present (to the OS) mask * R8 = CPU in LP1 state mask * R9 = CPU in LP2 state mask @@ -114,6 +114,40 @@ ENTRY(__tegra_cpu_reset_handler_start) ENTRY(__tegra_cpu_reset_handler) cpsid aif, 0x13 @ SVC mode, interrupts disabled + + mov32 r6, TEGRA_APB_MISC_BASE + ldr r6, [r6, #APB_MISC_GP_HIDREV] + and r6, r6, #0xff00 +#ifdef CONFIG_ARCH_TEGRA_2x_SOC +t20_check: + cmp r6, #(0x20 << 8) + bne after_t20_check +t20_errata: + # Tegra20 is a Cortex-A9 r1p1 + mrc p15, 0, r0, c1, c0, 0 @ read system control register + orr r0, r0, #1 << 14 @ erratum 716044 + mcr p15, 0, r0, c1, c0, 0 @ write system control register + mrc p15, 0, r0, c15, c0, 1 @ read diagnostic register + orr r0, r0, #1 << 4 @ erratum 742230 + orr r0, r0, #1 << 11 @ erratum 751472 + mcr p15, 0, r0, c15, c0, 1 @ write diagnostic register + b after_errata +after_t20_check: +#endif +#ifdef CONFIG_ARCH_TEGRA_3x_SOC +t30_check: + cmp r6, #(0x30 << 8) + bne after_t30_check +t30_errata: + # Tegra30 is a Cortex-A9 r2p9 + mrc p15, 0, r0, c15, c0, 1 @ read diagnostic register + orr r0, r0, #1 << 6 @ erratum 743622 + orr r0, r0, #1 << 11 @ erratum 751472 + mcr p15, 0, r0, c15, c0, 1 @ write diagnostic register + b after_errata +after_t30_check: +#endif +after_errata: mrc p15, 0, r10, c0, c0, 5 @ MPIDR and r10, r10, #0x3 @ R10 = CPU number mov r11, #1 @@ -129,16 +163,13 @@ ENTRY(__tegra_cpu_reset_handler) #ifdef CONFIG_ARCH_TEGRA_2x_SOC /* Are we on Tegra20? */ - mov32 r6, TEGRA_APB_MISC_BASE - ldr r0, [r6, #APB_MISC_GP_HIDREV] - and r0, r0, #0xff00 - cmp r0, #(0x20 << 8) + cmp r6, #(0x20 << 8) bne 1f /* If not CPU0, don't let CPU0 reset CPU1 now that CPU1 is coming up. */ - mov32 r6, TEGRA_PMC_BASE + mov32 r5, TEGRA_PMC_BASE mov r0, #0 cmp r10, #0 - strne r0, [r6, #PMC_SCRATCH41] + strne r0, [r5, #PMC_SCRATCH41] 1: #endif diff --git a/arch/arm/mach-tegra/sleep-tegra20.S b/arch/arm/mach-tegra/sleep-tegra20.S index 9f6bfafdd512..e3f2417c420e 100644 --- a/arch/arm/mach-tegra/sleep-tegra20.S +++ b/arch/arm/mach-tegra/sleep-tegra20.S @@ -197,7 +197,7 @@ ENTRY(tegra20_sleep_cpu_secondary_finish) mov r3, #CPU_RESETTABLE str r3, [r0] - bl cpu_do_idle + bl tegra_cpu_do_idle /* * cpu may be reset while in wfi, which will return through diff --git a/arch/arm/mach-tegra/sleep-tegra30.S b/arch/arm/mach-tegra/sleep-tegra30.S index 63a15bd9b653..d29dfcce948d 100644 --- a/arch/arm/mach-tegra/sleep-tegra30.S +++ b/arch/arm/mach-tegra/sleep-tegra30.S @@ -66,7 +66,9 @@ ENTRY(tegra30_cpu_shutdown) FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG | \ FLOW_CTRL_CSR_ENABLE mov r4, #(1 << 4) - orr r12, r12, r4, lsl r3 + ARM( orr r12, r12, r4, lsl r3 ) + THUMB( lsl r4, r4, r3 ) + THUMB( orr r12, r12, r4 ) str r12, [r1] /* Halt this CPU. */ diff --git a/arch/arm/mach-tegra/sleep.h b/arch/arm/mach-tegra/sleep.h index 4ffae541726e..2080fb12ce26 100644 --- a/arch/arm/mach-tegra/sleep.h +++ b/arch/arm/mach-tegra/sleep.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2010-2012, NVIDIA Corporation. All rights reserved. + * Copyright (c) 2010-2013, NVIDIA Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, @@ -92,7 +92,7 @@ #ifdef CONFIG_CACHE_L2X0 .macro l2_cache_resume, tmp1, tmp2, tmp3, phys_l2x0_saved_regs - adr \tmp1, \phys_l2x0_saved_regs + W(adr) \tmp1, \phys_l2x0_saved_regs ldr \tmp1, [\tmp1] ldr \tmp2, [\tmp1, #L2X0_R_PHY_BASE] ldr \tmp3, [\tmp2, #L2X0_CTRL] @@ -124,11 +124,11 @@ int tegra_sleep_cpu_finish(unsigned long); void tegra_disable_clean_inv_dcache(void); #ifdef CONFIG_HOTPLUG_CPU -void tegra20_hotplug_init(void); -void tegra30_hotplug_init(void); +void tegra20_hotplug_shutdown(void); +void tegra30_hotplug_shutdown(void); +void tegra_hotplug_init(void); #else -static inline void tegra20_hotplug_init(void) {} -static inline void tegra30_hotplug_init(void) {} +static inline void tegra_hotplug_init(void) {} #endif void tegra20_cpu_shutdown(int cpu); diff --git a/arch/arm/mach-tegra/board-dt-tegra20.c b/arch/arm/mach-tegra/tegra.c index a0edf2510280..0d1e4128d460 100644 --- a/arch/arm/mach-tegra/board-dt-tegra20.c +++ b/arch/arm/mach-tegra/tegra.c @@ -1,6 +1,7 @@ /* - * nVidia Tegra device tree board support + * NVIDIA Tegra SoC device tree board support * + * Copyright (C) 2011, 2013, NVIDIA Corporation * Copyright (C) 2010 Secret Lab Technologies, Ltd. * Copyright (C) 2010 Google, Inc. * @@ -30,9 +31,10 @@ #include <linux/pda_power.h> #include <linux/platform_data/tegra_usb.h> #include <linux/io.h> -#include <linux/i2c.h> -#include <linux/i2c-tegra.h> +#include <linux/slab.h> +#include <linux/sys_soc.h> #include <linux/usb/tegra_usb_phy.h> +#include <linux/clk/tegra.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -41,6 +43,7 @@ #include "board.h" #include "common.h" +#include "fuse.h" #include "iomap.h" static struct tegra_ehci_platform_data tegra_ehci1_pdata = { @@ -79,12 +82,38 @@ static struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = { static void __init tegra_dt_init(void) { + struct soc_device_attribute *soc_dev_attr; + struct soc_device *soc_dev; + struct device *parent = NULL; + + tegra_clocks_apply_init_table(); + + soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); + if (!soc_dev_attr) + goto out; + + soc_dev_attr->family = kasprintf(GFP_KERNEL, "Tegra"); + soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%d", tegra_revision); + soc_dev_attr->soc_id = kasprintf(GFP_KERNEL, "%d", tegra_chip_id); + + soc_dev = soc_device_register(soc_dev_attr); + if (IS_ERR(soc_dev)) { + kfree(soc_dev_attr->family); + kfree(soc_dev_attr->revision); + kfree(soc_dev_attr->soc_id); + kfree(soc_dev_attr); + goto out; + } + + parent = soc_device_to_device(soc_dev); + /* * Finished with the static registrations now; fill in the missing * devices */ +out: of_platform_populate(NULL, of_default_bus_match_table, - tegra20_auxdata_lookup, NULL); + tegra20_auxdata_lookup, parent); } static void __init trimslice_init(void) @@ -111,7 +140,8 @@ static void __init harmony_init(void) static void __init paz00_init(void) { - tegra_paz00_wifikill_init(); + if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC)) + tegra_paz00_wifikill_init(); } static struct { @@ -137,19 +167,21 @@ static void __init tegra_dt_init_late(void) } } -static const char *tegra20_dt_board_compat[] = { +static const char * const tegra_dt_board_compat[] = { + "nvidia,tegra114", + "nvidia,tegra30", "nvidia,tegra20", NULL }; -DT_MACHINE_START(TEGRA_DT, "nVidia Tegra20 (Flattened Device Tree)") +DT_MACHINE_START(TEGRA_DT, "NVIDIA Tegra SoC (Flattened Device Tree)") .map_io = tegra_map_common_io, .smp = smp_ops(tegra_smp_ops), - .init_early = tegra20_init_early, + .init_early = tegra_init_early, .init_irq = tegra_dt_init_irq, .init_time = clocksource_of_init, .init_machine = tegra_dt_init, .init_late = tegra_dt_init_late, .restart = tegra_assert_system_reset, - .dt_compat = tegra20_dt_board_compat, + .dt_compat = tegra_dt_board_compat, MACHINE_END diff --git a/arch/arm/mach-tegra/tegra114_speedo.c b/arch/arm/mach-tegra/tegra114_speedo.c new file mode 100644 index 000000000000..5218d4853cd3 --- /dev/null +++ b/arch/arm/mach-tegra/tegra114_speedo.c @@ -0,0 +1,104 @@ +/* + * Copyright (c) 2013, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/kernel.h> +#include <linux/bug.h> + +#include "fuse.h" + +#define CORE_PROCESS_CORNERS_NUM 2 +#define CPU_PROCESS_CORNERS_NUM 2 + +enum { + THRESHOLD_INDEX_0, + THRESHOLD_INDEX_1, + THRESHOLD_INDEX_COUNT, +}; + +static const u32 core_process_speedos[][CORE_PROCESS_CORNERS_NUM] = { + {1123, UINT_MAX}, + {0, UINT_MAX}, +}; + +static const u32 cpu_process_speedos[][CPU_PROCESS_CORNERS_NUM] = { + {1695, UINT_MAX}, + {0, UINT_MAX}, +}; + +static void rev_sku_to_speedo_ids(int rev, int sku, int *threshold) +{ + u32 tmp; + + switch (sku) { + case 0x00: + case 0x10: + case 0x05: + case 0x06: + tegra_cpu_speedo_id = 1; + tegra_soc_speedo_id = 0; + *threshold = THRESHOLD_INDEX_0; + break; + + case 0x03: + case 0x04: + tegra_cpu_speedo_id = 2; + tegra_soc_speedo_id = 1; + *threshold = THRESHOLD_INDEX_1; + break; + + default: + pr_err("Tegra114 Unknown SKU %d\n", sku); + tegra_cpu_speedo_id = 0; + tegra_soc_speedo_id = 0; + *threshold = THRESHOLD_INDEX_0; + break; + } + + if (rev == TEGRA_REVISION_A01) { + tmp = tegra_fuse_readl(0x270) << 1; + tmp |= tegra_fuse_readl(0x26c); + if (!tmp) + tegra_cpu_speedo_id = 0; + } +} + +void tegra114_init_speedo_data(void) +{ + u32 cpu_speedo_val; + u32 core_speedo_val; + int threshold; + int i; + + BUILD_BUG_ON(ARRAY_SIZE(cpu_process_speedos) != + THRESHOLD_INDEX_COUNT); + BUILD_BUG_ON(ARRAY_SIZE(core_process_speedos) != + THRESHOLD_INDEX_COUNT); + + rev_sku_to_speedo_ids(tegra_revision, tegra_sku_id, &threshold); + + cpu_speedo_val = tegra_fuse_readl(0x12c) + 1024; + core_speedo_val = tegra_fuse_readl(0x134); + + for (i = 0; i < CPU_PROCESS_CORNERS_NUM; i++) + if (cpu_speedo_val < cpu_process_speedos[threshold][i]) + break; + tegra_cpu_process_id = i; + + for (i = 0; i < CORE_PROCESS_CORNERS_NUM; i++) + if (core_speedo_val < core_process_speedos[threshold][i]) + break; + tegra_core_process_id = i; +} diff --git a/arch/arm/mach-tegra/tegra2_emc.c b/arch/arm/mach-tegra/tegra2_emc.c index ce7ce42a1ac9..9e8bdfa2b369 100644 --- a/arch/arm/mach-tegra/tegra2_emc.c +++ b/arch/arm/mach-tegra/tegra2_emc.c @@ -276,7 +276,7 @@ static struct tegra_emc_pdata *tegra_emc_fill_pdata(struct platform_device *pdev int i; WARN_ON(pdev->dev.platform_data); - BUG_ON(IS_ERR_OR_NULL(c)); + BUG_ON(IS_ERR(c)); pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); pdata->tables = devm_kzalloc(&pdev->dev, sizeof(*pdata->tables), diff --git a/arch/arm/mach-u300/include/mach/u300-regs.h b/arch/arm/mach-u300/include/mach/u300-regs.h index 1e49d901f2c9..0320495efc4d 100644 --- a/arch/arm/mach-u300/include/mach/u300-regs.h +++ b/arch/arm/mach-u300/include/mach/u300-regs.h @@ -95,7 +95,7 @@ #define U300_SPI_BASE (U300_FAST_PER_PHYS_BASE+0x6000) /* Fast UART1 on U335 only */ -#define U300_UART1_BASE (U300_SLOW_PER_PHYS_BASE+0x7000) +#define U300_UART1_BASE (U300_FAST_PER_PHYS_BASE+0x7000) /* * SLOW peripherals diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 3e5bbd0e5b23..f66d7deae46d 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -1,3 +1,19 @@ +config ARCH_U8500 + bool "ST-Ericsson U8500 Series" if ARCH_MULTI_V7 + depends on MMU + select ARCH_HAS_CPUFREQ + select ARCH_REQUIRE_GPIOLIB + select ARM_AMBA + select CLKDEV_LOOKUP + select CPU_V7 + select GENERIC_CLOCKEVENTS + select HAVE_ARM_SCU if SMP + select HAVE_ARM_TWD if LOCAL_TIMERS + select HAVE_SMP + select MIGHT_HAVE_CACHE_L2X0 + help + Support for ST-Ericsson's Ux500 architecture + if ARCH_U8500 config UX500_SOC_COMMON diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile index f24710dfc395..bf9b6be5b180 100644 --- a/arch/arm/mach-ux500/Makefile +++ b/arch/arm/mach-ux500/Makefile @@ -3,7 +3,7 @@ # obj-y := cpu.o devices.o devices-common.o \ - id.o usb.o timer.o + id.o usb.o timer.o pm.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o @@ -15,3 +15,5 @@ obj-$(CONFIG_MACH_MOP500) += board-mop500.o board-mop500-sdi.o \ board-mop500-audio.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o + +CFLAGS_hotplug.o += -march=armv7-a diff --git a/arch/arm/mach-ux500/board-mop500-audio.c b/arch/arm/mach-ux500/board-mop500-audio.c index 7209db7cdc72..aba9e5692958 100644 --- a/arch/arm/mach-ux500/board-mop500-audio.c +++ b/arch/arm/mach-ux500/board-mop500-audio.c @@ -10,10 +10,9 @@ #include <linux/platform_data/pinctrl-nomadik.h> #include <linux/platform_data/dma-ste-dma40.h> -#include <mach/devices.h> -#include <mach/hardware.h> -#include <mach/irqs.h> -#include <mach/msp.h> +#include "devices.h" +#include "irqs.h" +#include <linux/platform_data/asoc-ux500-msp.h> #include "ste-dma40-db8500.h" #include "board-mop500.h" diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c index 0a3f30df1eb8..947bd9eca079 100644 --- a/arch/arm/mach-ux500/board-mop500-pins.c +++ b/arch/arm/mach-ux500/board-mop500-pins.c @@ -13,8 +13,6 @@ #include <asm/mach-types.h> -#include <mach/hardware.h> - #include "pins-db8500.h" #include "board-mop500.h" @@ -48,8 +46,12 @@ BIAS(slpm_in_nopull_wkup, PIN_SLEEPMODE_ENABLED| PIN_SLPM_DIR_INPUT|PIN_SLPM_PULL_NONE|PIN_SLPM_WAKEUP_ENABLE); BIAS(slpm_in_wkup_pdis, PIN_SLEEPMODE_ENABLED| PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); +BIAS(slpm_in_wkup_pdis_en, PIN_SLEEPMODE_ENABLED| + PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_ENABLED); BIAS(slpm_wkup_pdis, PIN_SLEEPMODE_ENABLED| PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); +BIAS(slpm_wkup_pdis_en, PIN_SLEEPMODE_ENABLED| + PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_ENABLED); BIAS(slpm_out_lo_pdis, PIN_SLEEPMODE_ENABLED| PIN_SLPM_OUTPUT_LOW|PIN_SLPM_WAKEUP_DISABLE|PIN_SLPM_PDIS_DISABLED); BIAS(slpm_out_lo_wkup, PIN_SLEEPMODE_ENABLED| @@ -78,9 +80,6 @@ BIAS(out_wkup_pdis, PIN_SLPM_DIR_OUTPUT|PIN_SLPM_WAKEUP_ENABLE| PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-db8500", group, func) #define DB8500_PIN_HOG(pin,conf) \ PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-db8500", pin, conf) -#define DB8500_PIN_SLEEP(pin, conf, dev) \ - PIN_MAP_CONFIGS_PIN(dev, PINCTRL_STATE_SLEEP, "pinctrl-db8500", \ - pin, conf) /* These are default states associated with device and changed runtime */ #define DB8500_MUX(group,func,dev) \ @@ -309,8 +308,23 @@ static struct pinctrl_map __initdata mop500_family_pinmap[] = { DB8500_PIN_SLEEP("GPIO207_AJ23", slpm_in_wkup_pdis, "sdi4"), /* DAT4 */ /* Mux in USB pins, drive STP high */ - DB8500_MUX("usb_a_1", "usb", "musb-ux500.0"), - DB8500_PIN("GPIO257_AE29", out_hi, "musb-ux500.0"), /* STP */ + /* USB default state */ + DB8500_MUX("usb_a_1", "usb", "ab8500-usb.0"), + DB8500_PIN("GPIO257_AE29", out_hi, "ab8500-usb.0"), /* STP */ + /* USB sleep state */ + DB8500_PIN_SLEEP("GPIO256_AF28", slpm_wkup_pdis_en, "ab8500-usb.0"), /* NXT */ + DB8500_PIN_SLEEP("GPIO257_AE29", slpm_out_hi_wkup_pdis, "ab8500-usb.0"), /* STP */ + DB8500_PIN_SLEEP("GPIO258_AD29", slpm_wkup_pdis_en, "ab8500-usb.0"), /* XCLK */ + DB8500_PIN_SLEEP("GPIO259_AC29", slpm_wkup_pdis_en, "ab8500-usb.0"), /* DIR */ + DB8500_PIN_SLEEP("GPIO260_AD28", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT7 */ + DB8500_PIN_SLEEP("GPIO261_AD26", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT6 */ + DB8500_PIN_SLEEP("GPIO262_AE26", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT5 */ + DB8500_PIN_SLEEP("GPIO263_AG29", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT4 */ + DB8500_PIN_SLEEP("GPIO264_AE27", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT3 */ + DB8500_PIN_SLEEP("GPIO265_AD27", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT2 */ + DB8500_PIN_SLEEP("GPIO266_AC28", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT1 */ + DB8500_PIN_SLEEP("GPIO267_AC27", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT0 */ + /* Mux in SPI2 pins on the "other C1" altfunction */ DB8500_MUX("spi2_oc1_2", "spi2", "spi2"), DB8500_PIN("GPIO216_AG12", gpio_out_hi, "spi2"), /* FRM */ @@ -318,9 +332,9 @@ static struct pinctrl_map __initdata mop500_family_pinmap[] = { DB8500_PIN("GPIO215_AH13", out_lo, "spi2"), /* TXD */ DB8500_PIN("GPIO217_AH12", out_lo, "spi2"), /* CLK */ /* SPI2 idle state */ - DB8500_PIN_SLEEP("GPIO218_AH11", slpm_in_wkup_pdis, "spi2"), /* RXD */ - DB8500_PIN_SLEEP("GPIO215_AH13", slpm_out_lo_wkup_pdis, "spi2"), /* TXD */ - DB8500_PIN_SLEEP("GPIO217_AH12", slpm_wkup_pdis, "spi2"), /* CLK */ + DB8500_PIN_IDLE("GPIO218_AH11", slpm_in_wkup_pdis, "spi2"), /* RXD */ + DB8500_PIN_IDLE("GPIO215_AH13", slpm_out_lo_wkup_pdis, "spi2"), /* TXD */ + DB8500_PIN_IDLE("GPIO217_AH12", slpm_wkup_pdis, "spi2"), /* CLK */ /* SPI2 sleep state */ DB8500_PIN_SLEEP("GPIO216_AG12", slpm_in_wkup_pdis, "spi2"), /* FRM */ DB8500_PIN_SLEEP("GPIO218_AH11", slpm_in_wkup_pdis, "spi2"), /* RXD */ @@ -747,6 +761,8 @@ static struct pinctrl_map __initdata snowball_pinmap[] = { DB8500_PIN_HOG("GPIO21_AB3", out_hi), /* Mux in "SM" which is used for the SMSC911x Ethernet adapter */ DB8500_MUX_HOG("sm_b_1", "sm"), + /* User LED */ + DB8500_PIN_HOG("GPIO142_C11", gpio_out_hi), /* Drive RSTn_LAN high */ DB8500_PIN_HOG("GPIO141_C12", gpio_out_hi), /* Accelerometer/Magnetometer */ diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c index 2a17bc506cff..33c353bc1c4a 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.c +++ b/arch/arm/mach-ux500/board-mop500-regulators.c @@ -5,6 +5,7 @@ * * Authors: Sundar Iyer <sundar.iyer@stericsson.com> * Bengt Jonsson <bengt.g.jonsson@stericsson.com> + * Daniel Willerud <daniel.willerud@stericsson.com> * * MOP500 board specific initialization for regulators */ @@ -12,6 +13,7 @@ #include <linux/regulator/machine.h> #include <linux/regulator/ab8500.h> #include "board-mop500-regulators.h" +#include "id.h" static struct regulator_consumer_supply gpio_en_3v3_consumers[] = { REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), @@ -28,6 +30,20 @@ struct regulator_init_data gpio_en_3v3_regulator = { .consumer_supplies = gpio_en_3v3_consumers, }; +static struct regulator_consumer_supply sdi0_reg_consumers[] = { + REGULATOR_SUPPLY("vqmmc", "sdi0"), +}; + +struct regulator_init_data sdi0_reg_init_data = { + .constraints = { + .min_uV = 1800000, + .max_uV = 2900000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE|REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(sdi0_reg_consumers), + .consumer_supplies = sdi0_reg_consumers, +}; + /* * TPS61052 regulator */ @@ -53,21 +69,37 @@ struct regulator_init_data tps61052_regulator = { }; static struct regulator_consumer_supply ab8500_vaux1_consumers[] = { - /* External displays, connector on board 2v5 power supply */ - REGULATOR_SUPPLY("vaux12v5", "mcde.0"), + /* Main display, u8500 R3 uib */ + REGULATOR_SUPPLY("vddi", "mcde_disp_sony_acx424akp.0"), + /* Main display, u8500 uib and ST uib */ + REGULATOR_SUPPLY("vdd1", "samsung_s6d16d0.0"), + /* Secondary display, ST uib */ + REGULATOR_SUPPLY("vdd1", "samsung_s6d16d0.1"), /* SFH7741 proximity sensor */ REGULATOR_SUPPLY("vcc", "gpio-keys.0"), /* BH1780GLS ambient light sensor */ REGULATOR_SUPPLY("vcc", "2-0029"), /* lsm303dlh accelerometer */ - REGULATOR_SUPPLY("vdd", "3-0018"), + REGULATOR_SUPPLY("vdd", "2-0018"), + /* lsm303dlhc accelerometer */ + REGULATOR_SUPPLY("vdd", "2-0019"), /* lsm303dlh magnetometer */ - REGULATOR_SUPPLY("vdd", "3-001e"), + REGULATOR_SUPPLY("vdd", "2-001e"), /* Rohm BU21013 Touchscreen devices */ REGULATOR_SUPPLY("avdd", "3-005c"), REGULATOR_SUPPLY("avdd", "3-005d"), /* Synaptics RMI4 Touchscreen device */ REGULATOR_SUPPLY("vdd", "3-004b"), + /* L3G4200D Gyroscope device */ + REGULATOR_SUPPLY("vdd", "2-0068"), + /* Ambient light sensor device */ + REGULATOR_SUPPLY("vdd", "3-0029"), + /* Pressure sensor device */ + REGULATOR_SUPPLY("vdd", "2-005c"), + /* Cypress TrueTouch Touchscreen device */ + REGULATOR_SUPPLY("vcpin", "spi8.0"), + /* Camera device */ + REGULATOR_SUPPLY("vaux12v5", "mmio_camera"), }; static struct regulator_consumer_supply ab8500_vaux2_consumers[] = { @@ -75,18 +107,50 @@ static struct regulator_consumer_supply ab8500_vaux2_consumers[] = { REGULATOR_SUPPLY("vmmc", "sdi4"), /* AB8500 audio codec */ REGULATOR_SUPPLY("vcc-N2158", "ab8500-codec.0"), + /* AB8500 accessory detect 1 */ + REGULATOR_SUPPLY("vcc-N2158", "ab8500-acc-det.0"), + /* AB8500 Tv-out device */ + REGULATOR_SUPPLY("vcc-N2158", "mcde_tv_ab8500.4"), + /* AV8100 HDMI device */ + REGULATOR_SUPPLY("vcc-N2158", "av8100_hdmi.3"), }; static struct regulator_consumer_supply ab8500_vaux3_consumers[] = { + REGULATOR_SUPPLY("v-SD-STM", "stm"), /* External MMC slot power */ REGULATOR_SUPPLY("vmmc", "sdi0"), }; +static struct regulator_consumer_supply ab8505_vaux4_consumers[] = { +}; + +static struct regulator_consumer_supply ab8505_vaux5_consumers[] = { +}; + +static struct regulator_consumer_supply ab8505_vaux6_consumers[] = { +}; + +static struct regulator_consumer_supply ab8505_vaux8_consumers[] = { + /* AB8500 audio codec device */ + REGULATOR_SUPPLY("v-aux8", NULL), +}; + +static struct regulator_consumer_supply ab8505_vadc_consumers[] = { + /* Internal general-purpose ADC */ + REGULATOR_SUPPLY("vddadc", "ab8500-gpadc.0"), + /* ADC for charger */ + REGULATOR_SUPPLY("vddadc", "ab8500-charger.0"), +}; + static struct regulator_consumer_supply ab8500_vtvout_consumers[] = { /* TV-out DENC supply */ REGULATOR_SUPPLY("vtvout", "ab8500-denc.0"), /* Internal general-purpose ADC */ REGULATOR_SUPPLY("vddadc", "ab8500-gpadc.0"), + /* ADC for charger */ + REGULATOR_SUPPLY("vddadc", "ab8500-charger.0"), + /* AB8500 Tv-out device */ + REGULATOR_SUPPLY("vtvout", "mcde_tv_ab8500.4"), }; static struct regulator_consumer_supply ab8500_vaud_consumers[] = { @@ -114,77 +178,90 @@ static struct regulator_consumer_supply ab8500_vintcore_consumers[] = { REGULATOR_SUPPLY("v-intcore", NULL), /* USB Transceiver */ REGULATOR_SUPPLY("vddulpivio18", "ab8500-usb.0"), + /* Handled by abx500 clk driver */ + REGULATOR_SUPPLY("v-intcore", "abx500-clk.0"), +}; + +static struct regulator_consumer_supply ab8505_usb_consumers[] = { + /* HS USB OTG physical interface */ + REGULATOR_SUPPLY("v-ape", NULL), }; static struct regulator_consumer_supply ab8500_vana_consumers[] = { - /* External displays, connector on board, 1v8 power supply */ - REGULATOR_SUPPLY("vsmps2", "mcde.0"), + /* DB8500 DSI */ + REGULATOR_SUPPLY("vdddsi1v2", "mcde"), + REGULATOR_SUPPLY("vdddsi1v2", "b2r2_core"), + REGULATOR_SUPPLY("vdddsi1v2", "b2r2_1_core"), + REGULATOR_SUPPLY("vdddsi1v2", "dsilink.0"), + REGULATOR_SUPPLY("vdddsi1v2", "dsilink.1"), + REGULATOR_SUPPLY("vdddsi1v2", "dsilink.2"), + /* DB8500 CSI */ + REGULATOR_SUPPLY("vddcsi1v2", "mmio_camera"), }; /* ab8500 regulator register initialization */ -struct ab8500_regulator_reg_init -ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = { +static struct ab8500_regulator_reg_init ab8500_reg_init[] = { /* * VanaRequestCtrl = HP/LP depending on VxRequest * VextSupply1RequestCtrl = HP/LP depending on VxRequest */ - INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL2, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL2, 0xf0, 0x00), /* * VextSupply2RequestCtrl = HP/LP depending on VxRequest * VextSupply3RequestCtrl = HP/LP depending on VxRequest * Vaux1RequestCtrl = HP/LP depending on VxRequest * Vaux2RequestCtrl = HP/LP depending on VxRequest */ - INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL3, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL3, 0xff, 0x00), /* * Vaux3RequestCtrl = HP/LP depending on VxRequest * SwHPReq = Control through SWValid disabled */ - INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL4, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL4, 0x07, 0x00), /* * VanaSysClkReq1HPValid = disabled * Vaux1SysClkReq1HPValid = disabled * Vaux2SysClkReq1HPValid = disabled * Vaux3SysClkReq1HPValid = disabled */ - INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID1, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID1, 0xe8, 0x00), /* * VextSupply1SysClkReq1HPValid = disabled * VextSupply2SysClkReq1HPValid = disabled * VextSupply3SysClkReq1HPValid = SysClkReq1 controlled */ - INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID2, 0x40), + INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID2, 0x70, 0x40), /* * VanaHwHPReq1Valid = disabled * Vaux1HwHPreq1Valid = disabled * Vaux2HwHPReq1Valid = disabled * Vaux3HwHPReqValid = disabled */ - INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID1, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID1, 0xe8, 0x00), /* * VextSupply1HwHPReq1Valid = disabled * VextSupply2HwHPReq1Valid = disabled * VextSupply3HwHPReq1Valid = disabled */ - INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID2, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID2, 0x07, 0x00), /* * VanaHwHPReq2Valid = disabled * Vaux1HwHPReq2Valid = disabled * Vaux2HwHPReq2Valid = disabled * Vaux3HwHPReq2Valid = disabled */ - INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID1, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID1, 0xe8, 0x00), /* * VextSupply1HwHPReq2Valid = disabled * VextSupply2HwHPReq2Valid = disabled * VextSupply3HwHPReq2Valid = HWReq2 controlled */ - INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID2, 0x04), + INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID2, 0x07, 0x04), /* * VanaSwHPReqValid = disabled * Vaux1SwHPReqValid = disabled */ - INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID1, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID1, 0xa0, 0x00), /* * Vaux2SwHPReqValid = disabled * Vaux3SwHPReqValid = disabled @@ -192,7 +269,7 @@ ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = { * VextSupply2SwHPReqValid = disabled * VextSupply3SwHPReqValid = disabled */ - INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID2, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID2, 0x1f, 0x00), /* * SysClkReq2Valid1 = SysClkReq2 controlled * SysClkReq3Valid1 = disabled @@ -202,7 +279,7 @@ ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = { * SysClkReq7Valid1 = disabled * SysClkReq8Valid1 = disabled */ - INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID1, 0x2a), + INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID1, 0xfe, 0x2a), /* * SysClkReq2Valid2 = disabled * SysClkReq3Valid2 = disabled @@ -212,7 +289,7 @@ ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = { * SysClkReq7Valid2 = disabled * SysClkReq8Valid2 = disabled */ - INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID2, 0x20), + INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID2, 0xfe, 0x20), /* * VTVoutEna = disabled * Vintcore12Ena = disabled @@ -220,66 +297,62 @@ ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = { * Vintcore12LP = inactive (HP) * VTVoutLP = inactive (HP) */ - INIT_REGULATOR_REGISTER(AB8500_REGUMISC1, 0x10), + INIT_REGULATOR_REGISTER(AB8500_REGUMISC1, 0xfe, 0x10), /* * VaudioEna = disabled * VdmicEna = disabled * Vamic1Ena = disabled * Vamic2Ena = disabled */ - INIT_REGULATOR_REGISTER(AB8500_VAUDIOSUPPLY, 0x00), + INIT_REGULATOR_REGISTER(AB8500_VAUDIOSUPPLY, 0x1e, 0x00), /* * Vamic1_dzout = high-Z when Vamic1 is disabled * Vamic2_dzout = high-Z when Vamic2 is disabled */ - INIT_REGULATOR_REGISTER(AB8500_REGUCTRL1VAMIC, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUCTRL1VAMIC, 0x03, 0x00), /* - * VPll = Hw controlled + * VPll = Hw controlled (NOTE! PRCMU bits) * VanaRegu = force off */ - INIT_REGULATOR_REGISTER(AB8500_VPLLVANAREGU, 0x02), + INIT_REGULATOR_REGISTER(AB8500_VPLLVANAREGU, 0x0f, 0x02), /* * VrefDDREna = disabled * VrefDDRSleepMode = inactive (no pulldown) */ - INIT_REGULATOR_REGISTER(AB8500_VREFDDR, 0x00), + INIT_REGULATOR_REGISTER(AB8500_VREFDDR, 0x03, 0x00), /* - * VextSupply1Regu = HW control - * VextSupply2Regu = HW control - * VextSupply3Regu = HW control + * VextSupply1Regu = force LP + * VextSupply2Regu = force OFF + * VextSupply3Regu = force HP (-> STBB2=LP and TPS=LP) * ExtSupply2Bypass = ExtSupply12LPn ball is 0 when Ena is 0 * ExtSupply3Bypass = ExtSupply3LPn ball is 0 when Ena is 0 */ - INIT_REGULATOR_REGISTER(AB8500_EXTSUPPLYREGU, 0x2a), + INIT_REGULATOR_REGISTER(AB8500_EXTSUPPLYREGU, 0xff, 0x13), /* * Vaux1Regu = force HP * Vaux2Regu = force off */ - INIT_REGULATOR_REGISTER(AB8500_VAUX12REGU, 0x01), - /* - * Vaux3regu = force off - */ - INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3REGU, 0x00), + INIT_REGULATOR_REGISTER(AB8500_VAUX12REGU, 0x0f, 0x01), /* - * Vsmps1 = 1.15V + * Vaux3Regu = force off */ - INIT_REGULATOR_REGISTER(AB8500_VSMPS1SEL1, 0x24), + INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3REGU, 0x03, 0x00), /* - * Vaux1Sel = 2.5 V + * Vaux1Sel = 2.8 V */ - INIT_REGULATOR_REGISTER(AB8500_VAUX1SEL, 0x08), + INIT_REGULATOR_REGISTER(AB8500_VAUX1SEL, 0x0f, 0x0C), /* * Vaux2Sel = 2.9 V */ - INIT_REGULATOR_REGISTER(AB8500_VAUX2SEL, 0x0d), + INIT_REGULATOR_REGISTER(AB8500_VAUX2SEL, 0x0f, 0x0d), /* * Vaux3Sel = 2.91 V */ - INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3SEL, 0x07), + INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3SEL, 0x07, 0x07), /* * VextSupply12LP = disabled (no LP) */ - INIT_REGULATOR_REGISTER(AB8500_REGUCTRL2SPARE, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUCTRL2SPARE, 0x01, 0x00), /* * Vaux1Disch = short discharge time * Vaux2Disch = short discharge time @@ -288,33 +361,26 @@ ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = { * VTVoutDisch = short discharge time * VaudioDisch = short discharge time */ - INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH, 0xfc, 0x00), /* * VanaDisch = short discharge time * VdmicPullDownEna = pulldown disabled when Vdmic is disabled * VdmicDisch = short discharge time */ - INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH2, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH2, 0x16, 0x00), }; /* AB8500 regulators */ -struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { +static struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { /* supplies to the display/camera */ [AB8500_LDO_AUX1] = { .constraints = { .name = "V-DISPLAY", - .min_uV = 2500000, - .max_uV = 2900000, + .min_uV = 2800000, + .max_uV = 3300000, .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, .boot_on = 1, /* display is on at boot */ - /* - * This voltage cannot be disabled right now because - * it is somehow affecting the external MMC - * functionality, though that typically will use - * AUX3. - */ - .always_on = 1, }, .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux1_consumers), .consumer_supplies = ab8500_vaux1_consumers, @@ -326,7 +392,10 @@ struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { .min_uV = 1100000, .max_uV = 3300000, .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, + REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, }, .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux2_consumers), .consumer_supplies = ab8500_vaux2_consumers, @@ -338,7 +407,10 @@ struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { .min_uV = 1100000, .max_uV = 3300000, .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, + REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, }, .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux3_consumers), .consumer_supplies = ab8500_vaux3_consumers, @@ -392,18 +464,614 @@ struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { [AB8500_LDO_INTCORE] = { .constraints = { .name = "V-INTCORE", - .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .min_uV = 1250000, + .max_uV = 1350000, + .input_uV = 1800000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE | + REGULATOR_CHANGE_DRMS, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, }, .num_consumer_supplies = ARRAY_SIZE(ab8500_vintcore_consumers), .consumer_supplies = ab8500_vintcore_consumers, }, - /* supply for U8500 CSI/DSI, VANA LDO */ + /* supply for U8500 CSI-DSI, VANA LDO */ [AB8500_LDO_ANA] = { .constraints = { - .name = "V-CSI/DSI", + .name = "V-CSI-DSI", .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, .num_consumer_supplies = ARRAY_SIZE(ab8500_vana_consumers), .consumer_supplies = ab8500_vana_consumers, }, }; + +/* supply for VextSupply3 */ +static struct regulator_consumer_supply ab8500_ext_supply3_consumers[] = { + /* SIM supply for 3 V SIM cards */ + REGULATOR_SUPPLY("vinvsim", "sim-detect.0"), +}; + +/* extended configuration for VextSupply2, only used for HREFP_V20 boards */ +static struct ab8500_ext_regulator_cfg ab8500_ext_supply2 = { + .hwreq = true, +}; + +/* + * AB8500 external regulators + */ +static struct regulator_init_data ab8500_ext_regulators[] = { + /* fixed Vbat supplies VSMPS1_EXT_1V8 */ + [AB8500_EXT_SUPPLY1] = { + .constraints = { + .name = "ab8500-ext-supply1", + .min_uV = 1800000, + .max_uV = 1800000, + .initial_mode = REGULATOR_MODE_IDLE, + .boot_on = 1, + .always_on = 1, + }, + }, + /* fixed Vbat supplies VSMPS2_EXT_1V36 and VSMPS5_EXT_1V15 */ + [AB8500_EXT_SUPPLY2] = { + .constraints = { + .name = "ab8500-ext-supply2", + .min_uV = 1360000, + .max_uV = 1360000, + }, + }, + /* fixed Vbat supplies VSMPS3_EXT_3V4 and VSMPS4_EXT_3V4 */ + [AB8500_EXT_SUPPLY3] = { + .constraints = { + .name = "ab8500-ext-supply3", + .min_uV = 3400000, + .max_uV = 3400000, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .boot_on = 1, + }, + .num_consumer_supplies = + ARRAY_SIZE(ab8500_ext_supply3_consumers), + .consumer_supplies = ab8500_ext_supply3_consumers, + }, +}; + +/* ab8505 regulator register initialization */ +static struct ab8500_regulator_reg_init ab8505_reg_init[] = { + /* + * VarmRequestCtrl + * VsmpsCRequestCtrl + * VsmpsARequestCtrl + * VsmpsBRequestCtrl + */ + INIT_REGULATOR_REGISTER(AB8505_REGUREQUESTCTRL1, 0x00, 0x00), + /* + * VsafeRequestCtrl + * VpllRequestCtrl + * VanaRequestCtrl = HP/LP depending on VxRequest + */ + INIT_REGULATOR_REGISTER(AB8505_REGUREQUESTCTRL2, 0x30, 0x00), + /* + * Vaux1RequestCtrl = HP/LP depending on VxRequest + * Vaux2RequestCtrl = HP/LP depending on VxRequest + */ + INIT_REGULATOR_REGISTER(AB8505_REGUREQUESTCTRL3, 0xf0, 0x00), + /* + * Vaux3RequestCtrl = HP/LP depending on VxRequest + * SwHPReq = Control through SWValid disabled + */ + INIT_REGULATOR_REGISTER(AB8505_REGUREQUESTCTRL4, 0x07, 0x00), + /* + * VsmpsASysClkReq1HPValid + * VsmpsBSysClkReq1HPValid + * VsafeSysClkReq1HPValid + * VanaSysClkReq1HPValid = disabled + * VpllSysClkReq1HPValid + * Vaux1SysClkReq1HPValid = disabled + * Vaux2SysClkReq1HPValid = disabled + * Vaux3SysClkReq1HPValid = disabled + */ + INIT_REGULATOR_REGISTER(AB8505_REGUSYSCLKREQ1HPVALID1, 0xe8, 0x00), + /* + * VsmpsCSysClkReq1HPValid + * VarmSysClkReq1HPValid + * VbbSysClkReq1HPValid + * VsmpsMSysClkReq1HPValid + */ + INIT_REGULATOR_REGISTER(AB8505_REGUSYSCLKREQ1HPVALID2, 0x00, 0x00), + /* + * VsmpsAHwHPReq1Valid + * VsmpsBHwHPReq1Valid + * VsafeHwHPReq1Valid + * VanaHwHPReq1Valid = disabled + * VpllHwHPReq1Valid + * Vaux1HwHPreq1Valid = disabled + * Vaux2HwHPReq1Valid = disabled + * Vaux3HwHPReqValid = disabled + */ + INIT_REGULATOR_REGISTER(AB8505_REGUHWHPREQ1VALID1, 0xe8, 0x00), + /* + * VsmpsMHwHPReq1Valid + */ + INIT_REGULATOR_REGISTER(AB8505_REGUHWHPREQ1VALID2, 0x00, 0x00), + /* + * VsmpsAHwHPReq2Valid + * VsmpsBHwHPReq2Valid + * VsafeHwHPReq2Valid + * VanaHwHPReq2Valid = disabled + * VpllHwHPReq2Valid + * Vaux1HwHPReq2Valid = disabled + * Vaux2HwHPReq2Valid = disabled + * Vaux3HwHPReq2Valid = disabled + */ + INIT_REGULATOR_REGISTER(AB8505_REGUHWHPREQ2VALID1, 0xe8, 0x00), + /* + * VsmpsMHwHPReq2Valid + */ + INIT_REGULATOR_REGISTER(AB8505_REGUHWHPREQ2VALID2, 0x00, 0x00), + /** + * VsmpsCSwHPReqValid + * VarmSwHPReqValid + * VsmpsASwHPReqValid + * VsmpsBSwHPReqValid + * VsafeSwHPReqValid + * VanaSwHPReqValid + * VanaSwHPReqValid = disabled + * VpllSwHPReqValid + * Vaux1SwHPReqValid = disabled + */ + INIT_REGULATOR_REGISTER(AB8505_REGUSWHPREQVALID1, 0xa0, 0x00), + /* + * Vaux2SwHPReqValid = disabled + * Vaux3SwHPReqValid = disabled + * VsmpsMSwHPReqValid + */ + INIT_REGULATOR_REGISTER(AB8505_REGUSWHPREQVALID2, 0x03, 0x00), + /* + * SysClkReq2Valid1 = SysClkReq2 controlled + * SysClkReq3Valid1 = disabled + * SysClkReq4Valid1 = SysClkReq4 controlled + */ + INIT_REGULATOR_REGISTER(AB8505_REGUSYSCLKREQVALID1, 0x0e, 0x0a), + /* + * SysClkReq2Valid2 = disabled + * SysClkReq3Valid2 = disabled + * SysClkReq4Valid2 = disabled + */ + INIT_REGULATOR_REGISTER(AB8505_REGUSYSCLKREQVALID2, 0x0e, 0x00), + /* + * Vaux4SwHPReqValid + * Vaux4HwHPReq2Valid + * Vaux4HwHPReq1Valid + * Vaux4SysClkReq1HPValid + */ + INIT_REGULATOR_REGISTER(AB8505_REGUVAUX4REQVALID, 0x00, 0x00), + /* + * VadcEna = disabled + * VintCore12Ena = disabled + * VintCore12Sel = 1.25 V + * VintCore12LP = inactive (HP) + * VadcLP = inactive (HP) + */ + INIT_REGULATOR_REGISTER(AB8505_REGUMISC1, 0xfe, 0x10), + /* + * VaudioEna = disabled + * Vaux8Ena = disabled + * Vamic1Ena = disabled + * Vamic2Ena = disabled + */ + INIT_REGULATOR_REGISTER(AB8505_VAUDIOSUPPLY, 0x1e, 0x00), + /* + * Vamic1_dzout = high-Z when Vamic1 is disabled + * Vamic2_dzout = high-Z when Vamic2 is disabled + */ + INIT_REGULATOR_REGISTER(AB8505_REGUCTRL1VAMIC, 0x03, 0x00), + /* + * VsmpsARegu + * VsmpsASelCtrl + * VsmpsAAutoMode + * VsmpsAPWMMode + */ + INIT_REGULATOR_REGISTER(AB8505_VSMPSAREGU, 0x00, 0x00), + /* + * VsmpsBRegu + * VsmpsBSelCtrl + * VsmpsBAutoMode + * VsmpsBPWMMode + */ + INIT_REGULATOR_REGISTER(AB8505_VSMPSBREGU, 0x00, 0x00), + /* + * VsafeRegu + * VsafeSelCtrl + * VsafeAutoMode + * VsafePWMMode + */ + INIT_REGULATOR_REGISTER(AB8505_VSAFEREGU, 0x00, 0x00), + /* + * VPll = Hw controlled (NOTE! PRCMU bits) + * VanaRegu = force off + */ + INIT_REGULATOR_REGISTER(AB8505_VPLLVANAREGU, 0x0f, 0x02), + /* + * VextSupply1Regu = force OFF (OTP_ExtSupply12LPnPolarity 1) + * VextSupply2Regu = force OFF (OTP_ExtSupply12LPnPolarity 1) + * VextSupply3Regu = force OFF (OTP_ExtSupply3LPnPolarity 0) + * ExtSupply2Bypass = ExtSupply12LPn ball is 0 when Ena is 0 + * ExtSupply3Bypass = ExtSupply3LPn ball is 0 when Ena is 0 + */ + INIT_REGULATOR_REGISTER(AB8505_EXTSUPPLYREGU, 0xff, 0x30), + /* + * Vaux1Regu = force HP + * Vaux2Regu = force off + */ + INIT_REGULATOR_REGISTER(AB8505_VAUX12REGU, 0x0f, 0x01), + /* + * Vaux3Regu = force off + */ + INIT_REGULATOR_REGISTER(AB8505_VRF1VAUX3REGU, 0x03, 0x00), + /* + * VsmpsASel1 + */ + INIT_REGULATOR_REGISTER(AB8505_VSMPSASEL1, 0x00, 0x00), + /* + * VsmpsASel2 + */ + INIT_REGULATOR_REGISTER(AB8505_VSMPSASEL2, 0x00, 0x00), + /* + * VsmpsASel3 + */ + INIT_REGULATOR_REGISTER(AB8505_VSMPSASEL3, 0x00, 0x00), + /* + * VsmpsBSel1 + */ + INIT_REGULATOR_REGISTER(AB8505_VSMPSBSEL1, 0x00, 0x00), + /* + * VsmpsBSel2 + */ + INIT_REGULATOR_REGISTER(AB8505_VSMPSBSEL2, 0x00, 0x00), + /* + * VsmpsBSel3 + */ + INIT_REGULATOR_REGISTER(AB8505_VSMPSBSEL3, 0x00, 0x00), + /* + * VsafeSel1 + */ + INIT_REGULATOR_REGISTER(AB8505_VSAFESEL1, 0x00, 0x00), + /* + * VsafeSel2 + */ + INIT_REGULATOR_REGISTER(AB8505_VSAFESEL2, 0x00, 0x00), + /* + * VsafeSel3 + */ + INIT_REGULATOR_REGISTER(AB8505_VSAFESEL3, 0x00, 0x00), + /* + * Vaux1Sel = 2.8 V + */ + INIT_REGULATOR_REGISTER(AB8505_VAUX1SEL, 0x0f, 0x0C), + /* + * Vaux2Sel = 2.9 V + */ + INIT_REGULATOR_REGISTER(AB8505_VAUX2SEL, 0x0f, 0x0d), + /* + * Vaux3Sel = 2.91 V + */ + INIT_REGULATOR_REGISTER(AB8505_VRF1VAUX3SEL, 0x07, 0x07), + /* + * Vaux4RequestCtrl + */ + INIT_REGULATOR_REGISTER(AB8505_VAUX4REQCTRL, 0x00, 0x00), + /* + * Vaux4Regu + */ + INIT_REGULATOR_REGISTER(AB8505_VAUX4REGU, 0x00, 0x00), + /* + * Vaux4Sel + */ + INIT_REGULATOR_REGISTER(AB8505_VAUX4SEL, 0x00, 0x00), + /* + * Vaux1Disch = short discharge time + * Vaux2Disch = short discharge time + * Vaux3Disch = short discharge time + * Vintcore12Disch = short discharge time + * VTVoutDisch = short discharge time + * VaudioDisch = short discharge time + */ + INIT_REGULATOR_REGISTER(AB8505_REGUCTRLDISCH, 0xfc, 0x00), + /* + * VanaDisch = short discharge time + * Vaux8PullDownEna = pulldown disabled when Vaux8 is disabled + * Vaux8Disch = short discharge time + */ + INIT_REGULATOR_REGISTER(AB8505_REGUCTRLDISCH2, 0x16, 0x00), + /* + * Vaux4Disch = short discharge time + */ + INIT_REGULATOR_REGISTER(AB8505_REGUCTRLDISCH3, 0x01, 0x00), + /* + * Vaux5Sel + * Vaux5LP + * Vaux5Ena + * Vaux5Disch + * Vaux5DisSfst + * Vaux5DisPulld + */ + INIT_REGULATOR_REGISTER(AB8505_CTRLVAUX5, 0x00, 0x00), + /* + * Vaux6Sel + * Vaux6LP + * Vaux6Ena + * Vaux6DisPulld + */ + INIT_REGULATOR_REGISTER(AB8505_CTRLVAUX6, 0x00, 0x00), +}; + +struct regulator_init_data ab8505_regulators[AB8505_NUM_REGULATORS] = { + /* supplies to the display/camera */ + [AB8505_LDO_AUX1] = { + .constraints = { + .name = "V-DISPLAY", + .min_uV = 2800000, + .max_uV = 3300000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, + .boot_on = 1, /* display is on at boot */ + }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux1_consumers), + .consumer_supplies = ab8500_vaux1_consumers, + }, + /* supplies to the on-board eMMC */ + [AB8505_LDO_AUX2] = { + .constraints = { + .name = "V-eMMC1", + .min_uV = 1100000, + .max_uV = 3300000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux2_consumers), + .consumer_supplies = ab8500_vaux2_consumers, + }, + /* supply for VAUX3, supplies to SDcard slots */ + [AB8505_LDO_AUX3] = { + .constraints = { + .name = "V-MMC-SD", + .min_uV = 1100000, + .max_uV = 3300000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux3_consumers), + .consumer_supplies = ab8500_vaux3_consumers, + }, + /* supply for VAUX4, supplies to NFC and standalone secure element */ + [AB8505_LDO_AUX4] = { + .constraints = { + .name = "V-NFC-SE", + .min_uV = 1100000, + .max_uV = 3300000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8505_vaux4_consumers), + .consumer_supplies = ab8505_vaux4_consumers, + }, + /* supply for VAUX5, supplies to TBD */ + [AB8505_LDO_AUX5] = { + .constraints = { + .name = "V-AUX5", + .min_uV = 1050000, + .max_uV = 2790000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8505_vaux5_consumers), + .consumer_supplies = ab8505_vaux5_consumers, + }, + /* supply for VAUX6, supplies to TBD */ + [AB8505_LDO_AUX6] = { + .constraints = { + .name = "V-AUX6", + .min_uV = 1050000, + .max_uV = 2790000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8505_vaux6_consumers), + .consumer_supplies = ab8505_vaux6_consumers, + }, + /* supply for gpadc, ADC LDO */ + [AB8505_LDO_ADC] = { + .constraints = { + .name = "V-ADC", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8505_vadc_consumers), + .consumer_supplies = ab8505_vadc_consumers, + }, + /* supply for ab8500-vaudio, VAUDIO LDO */ + [AB8505_LDO_AUDIO] = { + .constraints = { + .name = "V-AUD", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vaud_consumers), + .consumer_supplies = ab8500_vaud_consumers, + }, + /* supply for v-anamic1 VAMic1-LDO */ + [AB8505_LDO_ANAMIC1] = { + .constraints = { + .name = "V-AMIC1", + .valid_ops_mask = REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vamic1_consumers), + .consumer_supplies = ab8500_vamic1_consumers, + }, + /* supply for v-amic2, VAMIC2 LDO, reuse constants for AMIC1 */ + [AB8505_LDO_ANAMIC2] = { + .constraints = { + .name = "V-AMIC2", + .valid_ops_mask = REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vamic2_consumers), + .consumer_supplies = ab8500_vamic2_consumers, + }, + /* supply for v-aux8, VAUX8 LDO */ + [AB8505_LDO_AUX8] = { + .constraints = { + .name = "V-AUX8", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8505_vaux8_consumers), + .consumer_supplies = ab8505_vaux8_consumers, + }, + /* supply for v-intcore12, VINTCORE12 LDO */ + [AB8505_LDO_INTCORE] = { + .constraints = { + .name = "V-INTCORE", + .min_uV = 1250000, + .max_uV = 1350000, + .input_uV = 1800000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE | + REGULATOR_CHANGE_DRMS, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vintcore_consumers), + .consumer_supplies = ab8500_vintcore_consumers, + }, + /* supply for LDO USB */ + [AB8505_LDO_USB] = { + .constraints = { + .name = "V-USB", + .valid_ops_mask = REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8505_usb_consumers), + .consumer_supplies = ab8505_usb_consumers, + }, + /* supply for U8500 CSI-DSI, VANA LDO */ + [AB8505_LDO_ANA] = { + .constraints = { + .name = "V-CSI-DSI", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vana_consumers), + .consumer_supplies = ab8500_vana_consumers, + }, +}; + +struct ab8500_regulator_platform_data ab8500_regulator_plat_data = { + .reg_init = ab8500_reg_init, + .num_reg_init = ARRAY_SIZE(ab8500_reg_init), + .regulator = ab8500_regulators, + .num_regulator = ARRAY_SIZE(ab8500_regulators), + .ext_regulator = ab8500_ext_regulators, + .num_ext_regulator = ARRAY_SIZE(ab8500_ext_regulators), +}; + +/* Use the AB8500 init settings for AB8505 as they are the same right now */ +struct ab8500_regulator_platform_data ab8505_regulator_plat_data = { + .reg_init = ab8505_reg_init, + .num_reg_init = ARRAY_SIZE(ab8505_reg_init), + .regulator = ab8505_regulators, + .num_regulator = ARRAY_SIZE(ab8505_regulators), +}; + +static void ab8500_modify_reg_init(int id, u8 mask, u8 value) +{ + int i; + + if (cpu_is_u8520()) { + for (i = ARRAY_SIZE(ab8505_reg_init) - 1; i >= 0; i--) { + if (ab8505_reg_init[i].id == id) { + u8 initval = ab8505_reg_init[i].value; + initval = (initval & ~mask) | (value & mask); + ab8505_reg_init[i].value = initval; + + BUG_ON(mask & ~ab8505_reg_init[i].mask); + return; + } + } + } else { + for (i = ARRAY_SIZE(ab8500_reg_init) - 1; i >= 0; i--) { + if (ab8500_reg_init[i].id == id) { + u8 initval = ab8500_reg_init[i].value; + initval = (initval & ~mask) | (value & mask); + ab8500_reg_init[i].value = initval; + + BUG_ON(mask & ~ab8500_reg_init[i].mask); + return; + } + } + } + + BUG_ON(1); +} + +void mop500_regulator_init(void) +{ + struct regulator_init_data *regulator; + + /* + * Temporarily turn on Vaux2 on 8520 machine + */ + if (cpu_is_u8520()) { + /* Vaux2 initialized to be on */ + ab8500_modify_reg_init(AB8505_VAUX12REGU, 0x0f, 0x05); + } + + /* + * Handle AB8500_EXT_SUPPLY2 on HREFP_V20_V50 boards (do it for + * all HREFP_V20 boards) + */ + if (cpu_is_u8500v20()) { + /* VextSupply2RequestCtrl = HP/OFF depending on VxRequest */ + ab8500_modify_reg_init(AB8500_REGUREQUESTCTRL3, 0x01, 0x01); + + /* VextSupply2SysClkReq1HPValid = SysClkReq1 controlled */ + ab8500_modify_reg_init(AB8500_REGUSYSCLKREQ1HPVALID2, + 0x20, 0x20); + + /* VextSupply2 = force HP at initialization */ + ab8500_modify_reg_init(AB8500_EXTSUPPLYREGU, 0x0c, 0x04); + + /* enable VextSupply2 during platform active */ + regulator = &ab8500_ext_regulators[AB8500_EXT_SUPPLY2]; + regulator->constraints.always_on = 1; + + /* disable VextSupply2 in suspend */ + regulator = &ab8500_ext_regulators[AB8500_EXT_SUPPLY2]; + regulator->constraints.state_mem.disabled = 1; + regulator->constraints.state_standby.disabled = 1; + + /* enable VextSupply2 HW control (used in suspend) */ + regulator->driver_data = (void *)&ab8500_ext_supply2; + } +} diff --git a/arch/arm/mach-ux500/board-mop500-regulators.h b/arch/arm/mach-ux500/board-mop500-regulators.h index 78a0642a2206..039f5132c370 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.h +++ b/arch/arm/mach-ux500/board-mop500-regulators.h @@ -14,10 +14,12 @@ #include <linux/regulator/machine.h> #include <linux/regulator/ab8500.h> -extern struct ab8500_regulator_reg_init -ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS]; -extern struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS]; +extern struct ab8500_regulator_platform_data ab8500_regulator_plat_data; +extern struct ab8500_regulator_platform_data ab8505_regulator_plat_data; extern struct regulator_init_data tps61052_regulator; extern struct regulator_init_data gpio_en_3v3_regulator; +extern struct regulator_init_data sdi0_reg_init_data; + +void mop500_regulator_init(void); #endif diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c index 7f2cb6c5e2c1..0ef38775a0c1 100644 --- a/arch/arm/mach-ux500/board-mop500-sdi.c +++ b/arch/arm/mach-ux500/board-mop500-sdi.c @@ -14,9 +14,9 @@ #include <linux/platform_data/dma-ste-dma40.h> #include <asm/mach-types.h> -#include <mach/devices.h> -#include <mach/hardware.h> +#include "devices.h" +#include "db8500-regs.h" #include "devices-db8500.h" #include "board-mop500.h" #include "ste-dma40-db8500.h" @@ -31,35 +31,6 @@ * SDI 0 (MicroSD slot) */ -/* GPIO pins used by the sdi0 level shifter */ -static int sdi0_en = -1; -static int sdi0_vsel = -1; - -static int mop500_sdi0_ios_handler(struct device *dev, struct mmc_ios *ios) -{ - switch (ios->power_mode) { - case MMC_POWER_UP: - case MMC_POWER_ON: - /* - * Level shifter voltage should depend on vdd to when deciding - * on either 1.8V or 2.9V. Once the decision has been made the - * level shifter must be disabled and re-enabled with a changed - * select signal in order to switch the voltage. Since there is - * no framework support yet for indicating 1.8V in vdd, use the - * default 2.9V. - */ - gpio_direction_output(sdi0_vsel, 0); - gpio_direction_output(sdi0_en, 1); - break; - case MMC_POWER_OFF: - gpio_direction_output(sdi0_vsel, 0); - gpio_direction_output(sdi0_en, 0); - break; - } - - return 0; -} - #ifdef CONFIG_STE_DMA40 struct stedma40_chan_cfg mop500_sdi0_dma_cfg_rx = { .mode = STEDMA40_MODE_LOGICAL, @@ -100,22 +71,6 @@ struct mmci_platform_data mop500_sdi0_data = { static void sdi0_configure(struct device *parent) { - int ret; - - ret = gpio_request(sdi0_en, "level shifter enable"); - if (!ret) - ret = gpio_request(sdi0_vsel, - "level shifter 1v8-3v select"); - - if (ret) { - pr_warning("unable to config sdi0 gpios for level shifter.\n"); - return; - } - - /* Select the default 2.9V and enable level shifter */ - gpio_direction_output(sdi0_vsel, 0); - gpio_direction_output(sdi0_en, 1); - /* Add the device, force v2 to subrevision 1 */ db8500_add_sdi0(parent, &mop500_sdi0_data, U8500_SDI_V2_PERIPHID); } @@ -123,8 +78,6 @@ static void sdi0_configure(struct device *parent) void mop500_sdi_tc35892_init(struct device *parent) { mop500_sdi0_data.gpio_cd = GPIO_SDMMC_CD; - sdi0_en = GPIO_SDMMC_EN; - sdi0_vsel = GPIO_SDMMC_1V8_3V_SEL; sdi0_configure(parent); } @@ -263,8 +216,6 @@ void __init snowball_sdi_init(struct device *parent) /* External Micro SD slot */ mop500_sdi0_data.gpio_cd = SNOWBALL_SDMMC_CD_GPIO; mop500_sdi0_data.cd_invert = true; - sdi0_en = SNOWBALL_SDMMC_EN_GPIO; - sdi0_vsel = SNOWBALL_SDMMC_1V8_3V_GPIO; sdi0_configure(parent); } @@ -276,8 +227,6 @@ void __init hrefv60_sdi_init(struct device *parent) db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID); /* External Micro SD slot */ mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO; - sdi0_en = HREFV60_SDMMC_EN_GPIO; - sdi0_vsel = HREFV60_SDMMC_1V8_3V_GPIO; sdi0_configure(parent); /* WLAN SDIO channel */ db8500_add_sdi1(parent, &mop500_sdi1_data, U8500_SDI_V2_PERIPHID); diff --git a/arch/arm/mach-ux500/board-mop500-u8500uib.c b/arch/arm/mach-ux500/board-mop500-u8500uib.c index ead91c968ff4..d397c19570af 100644 --- a/arch/arm/mach-ux500/board-mop500-u8500uib.c +++ b/arch/arm/mach-ux500/board-mop500-u8500uib.c @@ -12,12 +12,15 @@ #include <linux/mfd/tc3589x.h> #include <linux/input/matrix_keypad.h> -#include <mach/irqs.h> +#include "irqs.h" #include "board-mop500.h" -/* Dummy data that can be overridden by staging driver */ -struct i2c_board_info __initdata __weak mop500_i2c3_devices_u8500[] = { +static struct i2c_board_info __initdata mop500_i2c3_devices_u8500[] = { + { + I2C_BOARD_INFO("synaptics_rmi4_i2c", 0x4B), + .irq = NOMADIK_GPIO_TO_IRQ(84), + }, }; /* diff --git a/arch/arm/mach-ux500/board-mop500-uib.c b/arch/arm/mach-ux500/board-mop500-uib.c index 7037d3687e9f..bdaa422da028 100644 --- a/arch/arm/mach-ux500/board-mop500-uib.c +++ b/arch/arm/mach-ux500/board-mop500-uib.c @@ -11,7 +11,6 @@ #include <linux/init.h> #include <linux/i2c.h> -#include <mach/hardware.h> #include "board-mop500.h" #include "id.h" diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 87d2d7b38ce9..a15dd6b63a8f 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -25,6 +25,8 @@ #include <linux/mfd/abx500/ab8500.h> #include <linux/regulator/ab8500.h> #include <linux/regulator/fixed.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/gpio-regulator.h> #include <linux/mfd/tc3589x.h> #include <linux/mfd/tps6105x.h> #include <linux/mfd/abx500/ab8500-gpio.h> @@ -42,13 +44,13 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/hardware.h> -#include <mach/setup.h> -#include <mach/devices.h> -#include <mach/irqs.h> +#include "setup.h" +#include "devices.h" +#include "irqs.h" #include <linux/platform_data/crypto-ux500.h> #include "ste-dma40-db8500.h" +#include "db8500-regs.h" #include "devices-db8500.h" #include "board-mop500.h" #include "board-mop500-regulators.h" @@ -90,6 +92,37 @@ static struct platform_device snowball_gpio_en_3v3_regulator_dev = { }, }; +/* Dynamically populated. */ +static struct gpio sdi0_reg_gpios[] = { + { 0, GPIOF_OUT_INIT_LOW, "mmci_vsel" }, +}; + +static struct gpio_regulator_state sdi0_reg_states[] = { + { .value = 2900000, .gpios = (0 << 0) }, + { .value = 1800000, .gpios = (1 << 0) }, +}; + +static struct gpio_regulator_config sdi0_reg_info = { + .supply_name = "ext-mmc-level-shifter", + .gpios = sdi0_reg_gpios, + .nr_gpios = ARRAY_SIZE(sdi0_reg_gpios), + .states = sdi0_reg_states, + .nr_states = ARRAY_SIZE(sdi0_reg_states), + .type = REGULATOR_VOLTAGE, + .enable_high = 1, + .enabled_at_boot = 0, + .init_data = &sdi0_reg_init_data, + .startup_delay = 100, +}; + +static struct platform_device sdi0_regulator = { + .name = "gpio-regulator", + .id = -1, + .dev = { + .platform_data = &sdi0_reg_info, + }, +}; + static struct abx500_gpio_platform_data ab8500_gpio_pdata = { .gpio_base = MOP500_AB8500_PIN_GPIO(1), }; @@ -199,71 +232,11 @@ static struct platform_device snowball_sbnet_dev = { struct ab8500_platform_data ab8500_platdata = { .irq_base = MOP500_AB8500_IRQ_BASE, - .regulator_reg_init = ab8500_regulator_reg_init, - .num_regulator_reg_init = ARRAY_SIZE(ab8500_regulator_reg_init), - .regulator = ab8500_regulators, - .num_regulator = ARRAY_SIZE(ab8500_regulators), + .regulator = &ab8500_regulator_plat_data, .gpio = &ab8500_gpio_pdata, .codec = &ab8500_codec_pdata, }; -/* - * Thermal Sensor - */ - -static struct resource db8500_thsens_resources[] = { - { - .name = "IRQ_HOTMON_LOW", - .start = IRQ_PRCMU_HOTMON_LOW, - .end = IRQ_PRCMU_HOTMON_LOW, - .flags = IORESOURCE_IRQ, - }, - { - .name = "IRQ_HOTMON_HIGH", - .start = IRQ_PRCMU_HOTMON_HIGH, - .end = IRQ_PRCMU_HOTMON_HIGH, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct db8500_thsens_platform_data db8500_thsens_data = { - .trip_points[0] = { - .temp = 70000, - .type = THERMAL_TRIP_ACTIVE, - .cdev_name = { - [0] = "thermal-cpufreq-0", - }, - }, - .trip_points[1] = { - .temp = 75000, - .type = THERMAL_TRIP_ACTIVE, - .cdev_name = { - [0] = "thermal-cpufreq-0", - }, - }, - .trip_points[2] = { - .temp = 80000, - .type = THERMAL_TRIP_ACTIVE, - .cdev_name = { - [0] = "thermal-cpufreq-0", - }, - }, - .trip_points[3] = { - .temp = 85000, - .type = THERMAL_TRIP_CRITICAL, - }, - .num_trips = 4, -}; - -static struct platform_device u8500_thsens_device = { - .name = "db8500-thermal", - .resource = db8500_thsens_resources, - .num_resources = ARRAY_SIZE(db8500_thsens_resources), - .dev = { - .platform_data = &db8500_thsens_data, - }, -}; - static struct platform_device u8500_cpufreq_cooling_device = { .name = "db8500-cpufreq-cooling", }; @@ -491,6 +464,7 @@ static struct hash_platform_data u8500_hash1_platform_data = { /* add any platform devices here - TODO */ static struct platform_device *mop500_platform_devs[] __initdata = { &mop500_gpio_keys_device, + &sdi0_regulator, }; #ifdef CONFIG_STE_DMA40 @@ -632,8 +606,8 @@ static struct platform_device *snowball_platform_devs[] __initdata = { &snowball_key_dev, &snowball_sbnet_dev, &snowball_gpio_en_3v3_regulator_dev, - &u8500_thsens_device, &u8500_cpufreq_cooling_device, + &sdi0_regulator, }; static void __init mop500_init_machine(void) @@ -645,6 +619,9 @@ static void __init mop500_init_machine(void) platform_device_register(&db8500_prcmu_device); mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR; + sdi0_reg_info.enable_gpio = GPIO_SDMMC_EN; + sdi0_reg_info.gpios[0].gpio = GPIO_SDMMC_1V8_3V_SEL; + mop500_pinmaps_init(); parent = u8500_init_devices(&ab8500_platdata); @@ -678,6 +655,10 @@ static void __init snowball_init_machine(void) int i; platform_device_register(&db8500_prcmu_device); + + sdi0_reg_info.enable_gpio = SNOWBALL_SDMMC_EN_GPIO; + sdi0_reg_info.gpios[0].gpio = SNOWBALL_SDMMC_1V8_3V_GPIO; + snowball_pinmaps_init(); parent = u8500_init_devices(&ab8500_platdata); @@ -713,6 +694,9 @@ static void __init hrefv60_init_machine(void) */ mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO; + sdi0_reg_info.enable_gpio = HREFV60_SDMMC_EN_GPIO; + sdi0_reg_info.gpios[0].gpio = HREFV60_SDMMC_1V8_3V_GPIO; + hrefv60_pinmaps_init(); parent = u8500_init_devices(&ab8500_platdata); diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h index d38951be70df..49514b825034 100644 --- a/arch/arm/mach-ux500/board-mop500.h +++ b/arch/arm/mach-ux500/board-mop500.h @@ -8,8 +8,8 @@ #define __BOARD_MOP500_H /* For NOMADIK_NR_GPIO */ -#include <mach/irqs.h> -#include <mach/msp.h> +#include "irqs.h" +#include <linux/platform_data/asoc-ux500-msp.h> #include <linux/amba/mmci.h> /* Snowball specific GPIO assignments, this board has no GPIO expander */ diff --git a/arch/arm/mach-ux500/cache-l2x0.c b/arch/arm/mach-ux500/cache-l2x0.c index 1c1609da76ce..f58615b5c601 100644 --- a/arch/arm/mach-ux500/cache-l2x0.c +++ b/arch/arm/mach-ux500/cache-l2x0.c @@ -9,8 +9,8 @@ #include <asm/cacheflush.h> #include <asm/hardware/cache-l2x0.h> -#include <mach/hardware.h> +#include "db8500-regs.h" #include "id.h" static void __iomem *l2x0_base; @@ -47,8 +47,8 @@ static int __init ux500_l2x0_init(void) /* Unlock before init */ ux500_l2x0_unlock(); - /* DB9540's L2 has 128KB way size */ - if (cpu_is_u9540()) + /* DBx540's L2 has 128KB way size */ + if (cpu_is_ux540_family()) /* 128KB way size */ aux_val |= (0x4 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT); else diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index f1a581844372..995928ba22fd 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -28,15 +28,13 @@ #include <asm/mach/map.h> #include <asm/mach/arch.h> -#include <mach/hardware.h> -#include <mach/setup.h> -#include <mach/devices.h> -#include <mach/db8500-regs.h> -#include <mach/irqs.h> +#include "setup.h" +#include "devices.h" +#include "irqs.h" #include "devices-db8500.h" #include "ste-dma40-db8500.h" - +#include "db8500-regs.h" #include "board-mop500.h" #include "id.h" @@ -94,8 +92,6 @@ void __init u8500_map_io(void) iotable_init(u9540_io_desc, ARRAY_SIZE(u9540_io_desc)); else iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc)); - - _PRCMU_BASE = __io_address(U8500_PRCMU_BASE); } static struct resource db8500_pmu_resources[] = { @@ -282,6 +278,7 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL), OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu", &db8500_prcmu_pdata), + OF_DEV_AUXDATA("smsc,lan9115", 0x50000000, "smsc911x", NULL), /* Requires device name bindings. */ OF_DEV_AUXDATA("stericsson,nmk-pinctrl", U8500_PRCMU_BASE, "pinctrl-db8500", NULL), diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c index 537870d3fea8..b6145ea51641 100644 --- a/arch/arm/mach-ux500/cpu.c +++ b/arch/arm/mach-ux500/cpu.c @@ -8,7 +8,7 @@ #include <linux/platform_device.h> #include <linux/io.h> -#include <linux/mfd/db8500-prcmu.h> +#include <linux/mfd/dbx500-prcmu.h> #include <linux/clksrc-dbx500-prcmu.h> #include <linux/sys_soc.h> #include <linux/err.h> @@ -20,18 +20,17 @@ #include <linux/irqchip.h> #include <linux/irqchip/arm-gic.h> #include <linux/platform_data/clk-ux500.h> +#include <linux/platform_data/arm-ux500-pm.h> #include <asm/mach/map.h> -#include <mach/hardware.h> -#include <mach/setup.h> -#include <mach/devices.h> +#include "setup.h" +#include "devices.h" #include "board-mop500.h" +#include "db8500-regs.h" #include "id.h" -void __iomem *_PRCMU_BASE; - /* * FIXME: Should we set up the GPIO domain here? * @@ -68,13 +67,23 @@ void __init ux500_init_irq(void) * Init clocks here so that they are available for system timer * initialization. */ - if (cpu_is_u8500_family() || cpu_is_u9540()) - db8500_prcmu_early_init(); - - if (cpu_is_u8500_family() || cpu_is_u9540()) - u8500_clk_init(); - else if (cpu_is_u8540()) + if (cpu_is_u8500_family()) { + prcmu_early_init(U8500_PRCMU_BASE, SZ_8K - 1); + ux500_pm_init(U8500_PRCMU_BASE, SZ_8K - 1); + u8500_clk_init(U8500_CLKRST1_BASE, U8500_CLKRST2_BASE, + U8500_CLKRST3_BASE, U8500_CLKRST5_BASE, + U8500_CLKRST6_BASE); + } else if (cpu_is_u9540()) { + prcmu_early_init(U8500_PRCMU_BASE, SZ_8K - 1); + ux500_pm_init(U8500_PRCMU_BASE, SZ_8K - 1); + u8500_clk_init(U8500_CLKRST1_BASE, U8500_CLKRST2_BASE, + U8500_CLKRST3_BASE, U8500_CLKRST5_BASE, + U8500_CLKRST6_BASE); + } else if (cpu_is_u8540()) { + prcmu_early_init(U8500_PRCMU_BASE, SZ_8K + SZ_4K - 1); + ux500_pm_init(U8500_PRCMU_BASE, SZ_8K + SZ_4K - 1); u8540_clk_init(); + } } void __init ux500_init_late(void) @@ -140,14 +149,13 @@ struct device * __init ux500_soc_device_init(const char *soc_id) soc_info_populate(soc_dev_attr, soc_id); soc_dev = soc_device_register(soc_dev_attr); - if (IS_ERR_OR_NULL(soc_dev)) { + if (IS_ERR(soc_dev)) { kfree(soc_dev_attr); return NULL; } parent = soc_device_to_device(soc_dev); - if (!IS_ERR_OR_NULL(parent)) - device_create_file(parent, &ux500_soc_attr); + device_create_file(parent, &ux500_soc_attr); return parent; } diff --git a/arch/arm/mach-ux500/cpuidle.c b/arch/arm/mach-ux500/cpuidle.c index ce9149302cc3..317a2be129fb 100644 --- a/arch/arm/mach-ux500/cpuidle.c +++ b/arch/arm/mach-ux500/cpuidle.c @@ -11,18 +11,19 @@ #include <linux/module.h> #include <linux/cpuidle.h> -#include <linux/clockchips.h> #include <linux/spinlock.h> #include <linux/atomic.h> #include <linux/smp.h> #include <linux/mfd/dbx500-prcmu.h> +#include <linux/platform_data/arm-ux500-pm.h> #include <asm/cpuidle.h> #include <asm/proc-fns.h> +#include "db8500-regs.h" + static atomic_t master = ATOMIC_INIT(0); static DEFINE_SPINLOCK(master_lock); -static DEFINE_PER_CPU(struct cpuidle_device, ux500_cpuidle_device); static inline int ux500_enter_idle(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) @@ -30,8 +31,6 @@ static inline int ux500_enter_idle(struct cpuidle_device *dev, int this_cpu = smp_processor_id(); bool recouple = false; - clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &this_cpu); - if (atomic_inc_return(&master) == num_online_cpus()) { /* With this lock, we prevent the other cpu to exit and enter @@ -91,22 +90,20 @@ out: spin_unlock(&master_lock); } - clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &this_cpu); - return index; } static struct cpuidle_driver ux500_idle_driver = { .name = "ux500_idle", .owner = THIS_MODULE, - .en_core_tk_irqen = 1, .states = { ARM_CPUIDLE_WFI_STATE, { .enter = ux500_enter_idle, .exit_latency = 70, .target_residency = 260, - .flags = CPUIDLE_FLAG_TIME_VALID, + .flags = CPUIDLE_FLAG_TIME_VALID | + CPUIDLE_FLAG_TIMER_STOP, .name = "ApIdle", .desc = "ARM Retention", }, @@ -115,59 +112,13 @@ static struct cpuidle_driver ux500_idle_driver = { .state_count = 2, }; -/* - * For each cpu, setup the broadcast timer because we will - * need to migrate the timers for the states >= ApIdle. - */ -static void ux500_setup_broadcast_timer(void *arg) -{ - int cpu = smp_processor_id(); - clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ON, &cpu); -} - int __init ux500_idle_init(void) { - int ret, cpu; - struct cpuidle_device *device; - - /* Configure wake up reasons */ + /* Configure wake up reasons */ prcmu_enable_wakeups(PRCMU_WAKEUP(ARM) | PRCMU_WAKEUP(RTC) | PRCMU_WAKEUP(ABB)); - /* - * Configure the timer broadcast for each cpu, that must - * be done from the cpu context, so we use a smp cross - * call with 'on_each_cpu'. - */ - on_each_cpu(ux500_setup_broadcast_timer, NULL, 1); - - ret = cpuidle_register_driver(&ux500_idle_driver); - if (ret) { - printk(KERN_ERR "failed to register ux500 idle driver\n"); - return ret; - } - - for_each_online_cpu(cpu) { - device = &per_cpu(ux500_cpuidle_device, cpu); - device->cpu = cpu; - ret = cpuidle_register_device(device); - if (ret) { - printk(KERN_ERR "Failed to register cpuidle " - "device for cpu%d\n", cpu); - goto out_unregister; - } - } -out: - return ret; - -out_unregister: - for_each_online_cpu(cpu) { - device = &per_cpu(ux500_cpuidle_device, cpu); - cpuidle_unregister_device(device); - } - - cpuidle_unregister_driver(&ux500_idle_driver); - goto out; + return cpuidle_register(&ux500_idle_driver, NULL); } device_initcall(ux500_idle_init); diff --git a/arch/arm/mach-ux500/include/mach/db8500-regs.h b/arch/arm/mach-ux500/db8500-regs.h index 1530d493879d..b2d7a0b98629 100644 --- a/arch/arm/mach-ux500/include/mach/db8500-regs.h +++ b/arch/arm/mach-ux500/db8500-regs.h @@ -170,4 +170,32 @@ /* SoC identification number information */ #define U8500_BB_UID_BASE (U8500_BACKUPRAM1_BASE + 0xFC0) +/* Offsets to specific addresses in some IP blocks for DMA */ +#define MSP_TX_RX_REG_OFFSET 0 +#define CRYP1_RX_REG_OFFSET 0x10 +#define CRYP1_TX_REG_OFFSET 0x8 +#define HASH1_TX_REG_OFFSET 0x4 + +/* + * Macros to get at IO space when running virtually + * We dont map all the peripherals, let ioremap do + * this for us. We map only very basic peripherals here. + */ +#define U8500_IO_VIRTUAL 0xf0000000 +#define U8500_IO_PHYSICAL 0xa0000000 +/* This is where we map in the ROM to check ASIC IDs */ +#define UX500_VIRT_ROM 0xf0000000 + +/* This macro is used in assembly, so no cast */ +#define IO_ADDRESS(x) \ + (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + U8500_IO_VIRTUAL) + +/* typesafe io address */ +#define __io_address(n) IOMEM(IO_ADDRESS(n)) + +/* Used by some plat-nomadik code */ +#define io_p2v(n) __io_address(n) + +#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x) + #endif diff --git a/arch/arm/mach-ux500/devices-common.c b/arch/arm/mach-ux500/devices-common.c index 16b5f71e6974..f71b3d7bd4fb 100644 --- a/arch/arm/mach-ux500/devices-common.c +++ b/arch/arm/mach-ux500/devices-common.c @@ -13,8 +13,7 @@ #include <linux/platform_device.h> #include <linux/platform_data/pinctrl-nomadik.h> -#include <mach/hardware.h> -#include <mach/irqs.h> +#include "irqs.h" #include "devices-common.h" diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c index f3d9419f75d3..1cf94ce0feec 100644 --- a/arch/arm/mach-ux500/devices-db8500.c +++ b/arch/arm/mach-ux500/devices-db8500.c @@ -15,10 +15,10 @@ #include <linux/platform_data/dma-ste-dma40.h> #include <linux/mfd/dbx500-prcmu.h> -#include <mach/hardware.h> -#include <mach/setup.h> -#include <mach/irqs.h> +#include "setup.h" +#include "irqs.h" +#include "db8500-regs.h" #include "devices-db8500.h" #include "ste-dma40-db8500.h" @@ -199,6 +199,8 @@ struct platform_device u8500_ske_keypad_device = { struct prcmu_pdata db8500_prcmu_pdata = { .ab_platdata = &ab8500_platdata, + .ab_irq = IRQ_DB8500_AB8500, + .irq_base = IRQ_PRCMU_BASE, .version_offset = DB8500_PRCMU_FW_VERSION_OFFSET, .legacy_offset = DB8500_PRCMU_LEGACY_OFFSET, }; diff --git a/arch/arm/mach-ux500/devices-db8500.h b/arch/arm/mach-ux500/devices-db8500.h index dbcb35c48f06..321998320f98 100644 --- a/arch/arm/mach-ux500/devices-db8500.h +++ b/arch/arm/mach-ux500/devices-db8500.h @@ -9,7 +9,8 @@ #define __DEVICES_DB8500_H #include <linux/platform_data/usb-musb-ux500.h> -#include <mach/irqs.h> +#include "irqs.h" +#include "db8500-regs.h" #include "devices-common.h" struct ske_keypad_platform_data; diff --git a/arch/arm/mach-ux500/devices.c b/arch/arm/mach-ux500/devices.c index ea0a2f92ca70..0f9e52b95935 100644 --- a/arch/arm/mach-ux500/devices.c +++ b/arch/arm/mach-ux500/devices.c @@ -11,8 +11,9 @@ #include <linux/io.h> #include <linux/amba/bus.h> -#include <mach/hardware.h> -#include <mach/setup.h> +#include "setup.h" + +#include "db8500-regs.h" void __init amba_add_devices(struct amba_device *devs[], int num) { diff --git a/arch/arm/mach-ux500/include/mach/devices.h b/arch/arm/mach-ux500/devices.h index cbc6f1e4104d..cbc6f1e4104d 100644 --- a/arch/arm/mach-ux500/include/mach/devices.h +++ b/arch/arm/mach-ux500/devices.h diff --git a/arch/arm/mach-ux500/hotplug.c b/arch/arm/mach-ux500/hotplug.c index 2f6af259015d..2bc00b085e38 100644 --- a/arch/arm/mach-ux500/hotplug.c +++ b/arch/arm/mach-ux500/hotplug.c @@ -12,10 +12,9 @@ #include <linux/errno.h> #include <linux/smp.h> -#include <asm/cacheflush.h> #include <asm/smp_plat.h> -#include <mach/setup.h> +#include "setup.h" /* * platform-specific code to shutdown a CPU @@ -24,8 +23,6 @@ */ void __ref ux500_cpu_die(unsigned int cpu) { - flush_cache_all(); - /* directly enter low power state, skipping secure registers */ for (;;) { __asm__ __volatile__("dsb\n\t" "wfi\n\t" diff --git a/arch/arm/mach-ux500/id.c b/arch/arm/mach-ux500/id.c index 9f951842e1e5..0d33d1a06955 100644 --- a/arch/arm/mach-ux500/id.c +++ b/arch/arm/mach-ux500/id.c @@ -14,9 +14,9 @@ #include <asm/cacheflush.h> #include <asm/mach/map.h> -#include <mach/hardware.h> -#include <mach/setup.h> +#include "setup.h" +#include "db8500-regs.h" #include "id.h" struct dbx500_asic_id dbx500_id; diff --git a/arch/arm/mach-ux500/include/mach/debug-macro.S b/arch/arm/mach-ux500/include/mach/debug-macro.S deleted file mode 100644 index 67035223334a..000000000000 --- a/arch/arm/mach-ux500/include/mach/debug-macro.S +++ /dev/null @@ -1,39 +0,0 @@ -/* - * Debugging macro include header - * - * Copyright (C) 2009 ST-Ericsson - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ -#include <mach/hardware.h> - -#if CONFIG_UX500_DEBUG_UART > 2 -#error Invalid Ux500 debug UART -#endif - -/* - * DEBUG_LL only works if only one SOC is built in. We don't use #else below - * in order to get "__UX500_UART redefined" warnings if more than one SOC is - * built, so that there's some hint during the build that something is wrong. - */ - -#ifdef CONFIG_UX500_SOC_DB8500 -#define __UX500_UART(n) U8500_UART##n##_BASE -#endif - -#ifndef __UX500_UART -#error Unknown SOC -#endif - -#define UX500_UART(n) __UX500_UART(n) -#define UART_BASE UX500_UART(CONFIG_UX500_DEBUG_UART) - - .macro addruart, rp, rv, tmp - ldr \rp, =UART_BASE @ no, physical address - ldr \rv, =IO_ADDRESS(UART_BASE) @ yes, virtual address - .endm - -#include <asm/hardware/debug-pl01x.S> diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h deleted file mode 100644 index 5201ddace503..000000000000 --- a/arch/arm/mach-ux500/include/mach/hardware.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * Copyright (C) 2009 ST-Ericsson. - * - * U8500 hardware definitions - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#ifndef __MACH_HARDWARE_H -#define __MACH_HARDWARE_H - -/* - * Macros to get at IO space when running virtually - * We dont map all the peripherals, let ioremap do - * this for us. We map only very basic peripherals here. - */ -#define U8500_IO_VIRTUAL 0xf0000000 -#define U8500_IO_PHYSICAL 0xa0000000 -/* This is where we map in the ROM to check ASIC IDs */ -#define UX500_VIRT_ROM 0xf0000000 - -/* This macro is used in assembly, so no cast */ -#define IO_ADDRESS(x) \ - (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + U8500_IO_VIRTUAL) - -/* typesafe io address */ -#define __io_address(n) IOMEM(IO_ADDRESS(n)) - -/* Used by some plat-nomadik code */ -#define io_p2v(n) __io_address(n) - -#include <mach/db8500-regs.h> - -#define MSP_TX_RX_REG_OFFSET 0 -#define CRYP1_RX_REG_OFFSET 0x10 -#define CRYP1_TX_REG_OFFSET 0x8 -#define HASH1_TX_REG_OFFSET 0x4 - -#ifndef __ASSEMBLY__ - -extern void __iomem *_PRCMU_BASE; - -#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x) - -#endif /* __ASSEMBLY__ */ -#endif /* __MACH_HARDWARE_H */ diff --git a/arch/arm/mach-ux500/include/mach/msp.h b/arch/arm/mach-ux500/include/mach/msp.h deleted file mode 100644 index 9991aea3d577..000000000000 --- a/arch/arm/mach-ux500/include/mach/msp.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson - * License terms: GNU General Public License (GPL), version 2. - */ - -#ifndef __MSP_H -#define __MSP_H - -#include <linux/platform_data/dma-ste-dma40.h> - -enum msp_i2s_id { - MSP_I2S_0 = 0, - MSP_I2S_1, - MSP_I2S_2, - MSP_I2S_3, -}; - -/* Platform data structure for a MSP I2S-device */ -struct msp_i2s_platform_data { - enum msp_i2s_id id; - struct stedma40_chan_cfg *msp_i2s_dma_rx; - struct stedma40_chan_cfg *msp_i2s_dma_tx; -}; - -#endif diff --git a/arch/arm/mach-ux500/include/mach/timex.h b/arch/arm/mach-ux500/include/mach/timex.h deleted file mode 100644 index d0942c174018..000000000000 --- a/arch/arm/mach-ux500/include/mach/timex.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -#define CLOCK_TICK_RATE 110000000 - -#endif diff --git a/arch/arm/mach-ux500/include/mach/uncompress.h b/arch/arm/mach-ux500/include/mach/uncompress.h deleted file mode 100644 index 36969d52e53a..000000000000 --- a/arch/arm/mach-ux500/include/mach/uncompress.h +++ /dev/null @@ -1,57 +0,0 @@ -/* - * Copyright (C) 2009 ST-Ericsson - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_UNCOMPRESS_H -#define __ASM_ARCH_UNCOMPRESS_H - -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <linux/io.h> -#include <linux/amba/serial.h> -#include <mach/hardware.h> - -void __iomem *ux500_uart_base; - -static void putc(const char c) -{ - /* Do nothing if the UART is not enabled. */ - if (!(__raw_readb(ux500_uart_base + UART011_CR) & 0x1)) - return; - - if (c == '\n') - putc('\r'); - - while (__raw_readb(ux500_uart_base + UART01x_FR) & (1 << 5)) - barrier(); - __raw_writeb(c, ux500_uart_base + UART01x_DR); -} - -static void flush(void) -{ - if (!(__raw_readb(ux500_uart_base + UART011_CR) & 0x1)) - return; - while (__raw_readb(ux500_uart_base + UART01x_FR) & (1 << 3)) - barrier(); -} - -static inline void arch_decomp_setup(void) -{ - /* Use machine_is_foo() macro if you need to switch base someday */ - ux500_uart_base = (void __iomem *)U8500_UART2_BASE; -} - -#endif /* __ASM_ARCH_UNCOMPRESS_H */ diff --git a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h b/arch/arm/mach-ux500/irqs-board-mop500.h index d526dd8e87d3..d526dd8e87d3 100644 --- a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h +++ b/arch/arm/mach-ux500/irqs-board-mop500.h diff --git a/arch/arm/mach-ux500/include/mach/irqs-db8500.h b/arch/arm/mach-ux500/irqs-db8500.h index 68bc14974608..f3a9d5947ef3 100644 --- a/arch/arm/mach-ux500/include/mach/irqs-db8500.h +++ b/arch/arm/mach-ux500/irqs-db8500.h @@ -109,31 +109,6 @@ /* Virtual interrupts corresponding to the PRCMU wakeups. */ #define IRQ_PRCMU_BASE IRQ_SOC_START -#define NUM_PRCMU_WAKEUPS (IRQ_PRCMU_END - IRQ_PRCMU_BASE) - -#define IRQ_PRCMU_RTC (IRQ_PRCMU_BASE) -#define IRQ_PRCMU_RTT0 (IRQ_PRCMU_BASE + 1) -#define IRQ_PRCMU_RTT1 (IRQ_PRCMU_BASE + 2) -#define IRQ_PRCMU_HSI0 (IRQ_PRCMU_BASE + 3) -#define IRQ_PRCMU_HSI1 (IRQ_PRCMU_BASE + 4) -#define IRQ_PRCMU_CA_WAKE (IRQ_PRCMU_BASE + 5) -#define IRQ_PRCMU_USB (IRQ_PRCMU_BASE + 6) -#define IRQ_PRCMU_ABB (IRQ_PRCMU_BASE + 7) -#define IRQ_PRCMU_ABB_FIFO (IRQ_PRCMU_BASE + 8) -#define IRQ_PRCMU_ARM (IRQ_PRCMU_BASE + 9) -#define IRQ_PRCMU_MODEM_SW_RESET_REQ (IRQ_PRCMU_BASE + 10) -#define IRQ_PRCMU_GPIO0 (IRQ_PRCMU_BASE + 11) -#define IRQ_PRCMU_GPIO1 (IRQ_PRCMU_BASE + 12) -#define IRQ_PRCMU_GPIO2 (IRQ_PRCMU_BASE + 13) -#define IRQ_PRCMU_GPIO3 (IRQ_PRCMU_BASE + 14) -#define IRQ_PRCMU_GPIO4 (IRQ_PRCMU_BASE + 15) -#define IRQ_PRCMU_GPIO5 (IRQ_PRCMU_BASE + 16) -#define IRQ_PRCMU_GPIO6 (IRQ_PRCMU_BASE + 17) -#define IRQ_PRCMU_GPIO7 (IRQ_PRCMU_BASE + 18) -#define IRQ_PRCMU_GPIO8 (IRQ_PRCMU_BASE + 19) -#define IRQ_PRCMU_CA_SLEEP (IRQ_PRCMU_BASE + 20) -#define IRQ_PRCMU_HOTMON_LOW (IRQ_PRCMU_BASE + 21) -#define IRQ_PRCMU_HOTMON_HIGH (IRQ_PRCMU_BASE + 22) #define IRQ_PRCMU_END (IRQ_PRCMU_BASE + 23) /* diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/irqs.h index fc77b4274c8d..15b2af698ed7 100644 --- a/arch/arm/mach-ux500/include/mach/irqs.h +++ b/arch/arm/mach-ux500/irqs.h @@ -10,8 +10,6 @@ #ifndef ASM_ARCH_IRQS_H #define ASM_ARCH_IRQS_H -#include <mach/hardware.h> - #define IRQ_LOCALTIMER 29 #define IRQ_LOCALWDOG 30 @@ -36,14 +34,14 @@ /* This will be overridden by SoC-specific irq headers */ #define IRQ_SOC_END IRQ_SOC_START -#include <mach/irqs-db8500.h> +#include "irqs-db8500.h" #define IRQ_BOARD_START IRQ_SOC_END /* This will be overridden by board-specific irq headers */ #define IRQ_BOARD_END IRQ_BOARD_START #ifdef CONFIG_MACH_MOP500 -#include <mach/irqs-board-mop500.h> +#include "irqs-board-mop500.h" #endif #define UX500_NR_IRQS IRQ_BOARD_END diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c index 18f7af339dc9..14d90469392f 100644 --- a/arch/arm/mach-ux500/platsmp.c +++ b/arch/arm/mach-ux500/platsmp.c @@ -16,15 +16,14 @@ #include <linux/device.h> #include <linux/smp.h> #include <linux/io.h> -#include <linux/irqchip/arm-gic.h> #include <asm/cacheflush.h> #include <asm/smp_plat.h> #include <asm/smp_scu.h> -#include <mach/hardware.h> -#include <mach/setup.h> +#include "setup.h" +#include "db8500-regs.h" #include "id.h" /* This is called from headsmp.S to wakeup the secondary core */ @@ -58,13 +57,6 @@ static DEFINE_SPINLOCK(boot_lock); static void __cpuinit ux500_secondary_init(unsigned int cpu) { /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); - - /* * let the primary processor know we're out of the * pen, then head off into the C entry point */ diff --git a/arch/arm/mach-ux500/pm.c b/arch/arm/mach-ux500/pm.c new file mode 100644 index 000000000000..1a468f0fd22e --- /dev/null +++ b/arch/arm/mach-ux500/pm.c @@ -0,0 +1,167 @@ +/* + * Copyright (C) ST-Ericsson SA 2010-2013 + * Author: Rickard Andersson <rickard.andersson@stericsson.com> for + * ST-Ericsson. + * Author: Daniel Lezcano <daniel.lezcano@linaro.org> for Linaro. + * License terms: GNU General Public License (GPL) version 2 + * + */ + +#include <linux/kernel.h> +#include <linux/irqchip/arm-gic.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/platform_data/arm-ux500-pm.h> + +#include "db8500-regs.h" + +/* ARM WFI Standby signal register */ +#define PRCM_ARM_WFI_STANDBY (prcmu_base + 0x130) +#define PRCM_ARM_WFI_STANDBY_WFI0 0x08 +#define PRCM_ARM_WFI_STANDBY_WFI1 0x10 +#define PRCM_IOCR (prcmu_base + 0x310) +#define PRCM_IOCR_IOFORCE 0x1 + +/* Dual A9 core interrupt management unit registers */ +#define PRCM_A9_MASK_REQ (prcmu_base + 0x328) +#define PRCM_A9_MASK_REQ_PRCM_A9_MASK_REQ 0x1 + +#define PRCM_A9_MASK_ACK (prcmu_base + 0x32c) +#define PRCM_ARMITMSK31TO0 (prcmu_base + 0x11c) +#define PRCM_ARMITMSK63TO32 (prcmu_base + 0x120) +#define PRCM_ARMITMSK95TO64 (prcmu_base + 0x124) +#define PRCM_ARMITMSK127TO96 (prcmu_base + 0x128) +#define PRCM_POWER_STATE_VAL (prcmu_base + 0x25C) +#define PRCM_ARMITVAL31TO0 (prcmu_base + 0x260) +#define PRCM_ARMITVAL63TO32 (prcmu_base + 0x264) +#define PRCM_ARMITVAL95TO64 (prcmu_base + 0x268) +#define PRCM_ARMITVAL127TO96 (prcmu_base + 0x26C) + +static void __iomem *prcmu_base; + +/* This function decouple the gic from the prcmu */ +int prcmu_gic_decouple(void) +{ + u32 val = readl(PRCM_A9_MASK_REQ); + + /* Set bit 0 register value to 1 */ + writel(val | PRCM_A9_MASK_REQ_PRCM_A9_MASK_REQ, + PRCM_A9_MASK_REQ); + + /* Make sure the register is updated */ + readl(PRCM_A9_MASK_REQ); + + /* Wait a few cycles for the gic mask completion */ + udelay(1); + + return 0; +} + +/* This function recouple the gic with the prcmu */ +int prcmu_gic_recouple(void) +{ + u32 val = readl(PRCM_A9_MASK_REQ); + + /* Set bit 0 register value to 0 */ + writel(val & ~PRCM_A9_MASK_REQ_PRCM_A9_MASK_REQ, PRCM_A9_MASK_REQ); + + return 0; +} + +#define PRCMU_GIC_NUMBER_REGS 5 + +/* + * This function checks if there are pending irq on the gic. It only + * makes sense if the gic has been decoupled before with the + * db8500_prcmu_gic_decouple function. Disabling an interrupt only + * disables the forwarding of the interrupt to any CPU interface. It + * does not prevent the interrupt from changing state, for example + * becoming pending, or active and pending if it is already + * active. Hence, we have to check the interrupt is pending *and* is + * active. + */ +bool prcmu_gic_pending_irq(void) +{ + u32 pr; /* Pending register */ + u32 er; /* Enable register */ + void __iomem *dist_base = __io_address(U8500_GIC_DIST_BASE); + int i; + + /* 5 registers. STI & PPI not skipped */ + for (i = 0; i < PRCMU_GIC_NUMBER_REGS; i++) { + + pr = readl_relaxed(dist_base + GIC_DIST_PENDING_SET + i * 4); + er = readl_relaxed(dist_base + GIC_DIST_ENABLE_SET + i * 4); + + if (pr & er) + return true; /* There is a pending interrupt */ + } + + return false; +} + +/* + * This function checks if there are pending interrupt on the + * prcmu which has been delegated to monitor the irqs with the + * db8500_prcmu_copy_gic_settings function. + */ +bool prcmu_pending_irq(void) +{ + u32 it, im; + int i; + + for (i = 0; i < PRCMU_GIC_NUMBER_REGS - 1; i++) { + it = readl(PRCM_ARMITVAL31TO0 + i * 4); + im = readl(PRCM_ARMITMSK31TO0 + i * 4); + if (it & im) + return true; /* There is a pending interrupt */ + } + + return false; +} + +/* + * This function checks if the specified cpu is in in WFI. It's usage + * makes sense only if the gic is decoupled with the db8500_prcmu_gic_decouple + * function. Of course passing smp_processor_id() to this function will + * always return false... + */ +bool prcmu_is_cpu_in_wfi(int cpu) +{ + return readl(PRCM_ARM_WFI_STANDBY) & cpu ? PRCM_ARM_WFI_STANDBY_WFI1 : + PRCM_ARM_WFI_STANDBY_WFI0; +} + +/* + * This function copies the gic SPI settings to the prcmu in order to + * monitor them and abort/finish the retention/off sequence or state. + */ +int prcmu_copy_gic_settings(void) +{ + u32 er; /* Enable register */ + void __iomem *dist_base = __io_address(U8500_GIC_DIST_BASE); + int i; + + /* We skip the STI and PPI */ + for (i = 0; i < PRCMU_GIC_NUMBER_REGS - 1; i++) { + er = readl_relaxed(dist_base + + GIC_DIST_ENABLE_SET + (i + 1) * 4); + writel(er, PRCM_ARMITMSK31TO0 + i * 4); + } + + return 0; +} + +void __init ux500_pm_init(u32 phy_base, u32 size) +{ + prcmu_base = ioremap(phy_base, size); + if (!prcmu_base) { + pr_err("could not remap PRCMU for PM functions\n"); + return; + } + /* + * On watchdog reboot the GIC is in some cases decoupled. + * This will make sure that the GIC is correctly configured. + */ + prcmu_gic_recouple(); +} diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/setup.h index bddce2b49372..bddce2b49372 100644 --- a/arch/arm/mach-ux500/include/mach/setup.h +++ b/arch/arm/mach-ux500/setup.h diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c index a6af0b8732ba..b6bd0efcbe64 100644 --- a/arch/arm/mach-ux500/timer.c +++ b/arch/arm/mach-ux500/timer.c @@ -7,16 +7,17 @@ #include <linux/io.h> #include <linux/errno.h> #include <linux/clksrc-dbx500-prcmu.h> +#include <linux/clocksource.h> #include <linux/of.h> #include <linux/of_address.h> #include <linux/platform_data/clocksource-nomadik-mtu.h> #include <asm/smp_twd.h> -#include <mach/setup.h> -#include <mach/hardware.h> -#include <mach/irqs.h> +#include "setup.h" +#include "irqs.h" +#include "db8500-regs.h" #include "id.h" #ifdef CONFIG_HAVE_ARM_TWD @@ -32,7 +33,7 @@ static void __init ux500_twd_init(void) twd_local_timer = &u8500_twd_local_timer; if (of_have_populated_dt()) - twd_local_timer_of_register(); + clocksource_of_init(); else { err = twd_local_timer_register(twd_local_timer); if (err) diff --git a/arch/arm/mach-ux500/usb.c b/arch/arm/mach-ux500/usb.c index 78ac65f62e87..2dfc72f7cd8a 100644 --- a/arch/arm/mach-ux500/usb.c +++ b/arch/arm/mach-ux500/usb.c @@ -10,7 +10,7 @@ #include <linux/platform_data/usb-musb-ux500.h> #include <linux/platform_data/dma-ste-dma40.h> -#include <mach/hardware.h> +#include "db8500-regs.h" #define MUSB_DMA40_RX_CH { \ .mode = STEDMA40_MODE_LOGICAL, \ diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index 25160aeaa3b7..54bb80b012ac 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -749,12 +749,25 @@ void versatile_restart(char mode, const char *cmd) /* Early initializations */ void __init versatile_init_early(void) { + u32 val; void __iomem *sys = __io_address(VERSATILE_SYS_BASE); osc4_clk.vcoreg = sys + VERSATILE_SYS_OSCCLCD_OFFSET; clkdev_add_table(lookups, ARRAY_SIZE(lookups)); versatile_sched_clock_init(sys + VERSATILE_SYS_24MHz_OFFSET, 24000000); + + /* + * set clock frequency: + * VERSATILE_REFCLK is 32KHz + * VERSATILE_TIMCLK is 1MHz + */ + val = readl(__io_address(VERSATILE_SCTL_BASE)); + writel((VERSATILE_TIMCLK << VERSATILE_TIMER1_EnSel) | + (VERSATILE_TIMCLK << VERSATILE_TIMER2_EnSel) | + (VERSATILE_TIMCLK << VERSATILE_TIMER3_EnSel) | + (VERSATILE_TIMCLK << VERSATILE_TIMER4_EnSel) | val, + __io_address(VERSATILE_SCTL_BASE)); } void __init versatile_init(void) @@ -785,19 +798,6 @@ void __init versatile_init(void) */ void __init versatile_timer_init(void) { - u32 val; - - /* - * set clock frequency: - * VERSATILE_REFCLK is 32KHz - * VERSATILE_TIMCLK is 1MHz - */ - val = readl(__io_address(VERSATILE_SCTL_BASE)); - writel((VERSATILE_TIMCLK << VERSATILE_TIMER1_EnSel) | - (VERSATILE_TIMCLK << VERSATILE_TIMER2_EnSel) | - (VERSATILE_TIMCLK << VERSATILE_TIMER3_EnSel) | - (VERSATILE_TIMCLK << VERSATILE_TIMER4_EnSel) | val, - __io_address(VERSATILE_SCTL_BASE)); /* * Initialise to a known state (all timers off) diff --git a/arch/arm/mach-versatile/versatile_dt.c b/arch/arm/mach-versatile/versatile_dt.c index 2558f2e957c3..3621b000a0f6 100644 --- a/arch/arm/mach-versatile/versatile_dt.c +++ b/arch/arm/mach-versatile/versatile_dt.c @@ -45,7 +45,6 @@ DT_MACHINE_START(VERSATILE_PB, "ARM-Versatile (Device Tree Support)") .map_io = versatile_map_io, .init_early = versatile_init_early, .init_irq = versatile_init_irq, - .init_time = versatile_timer_init, .init_machine = versatile_dt_init, .dt_compat = versatile_dt_match, .restart = versatile_restart, diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig index 52d315b792c8..5907e10c37fd 100644 --- a/arch/arm/mach-vexpress/Kconfig +++ b/arch/arm/mach-vexpress/Kconfig @@ -9,6 +9,8 @@ config ARCH_VEXPRESS select COMMON_CLK_VERSATILE select CPU_V7 select GENERIC_CLOCKEVENTS + select HAVE_ARM_SCU if SMP + select HAVE_ARM_TWD if LOCAL_TIMERS select HAVE_CLK select HAVE_PATA_PLATFORM select HAVE_SMP @@ -17,6 +19,9 @@ config ARCH_VEXPRESS select NO_IOPORT select PLAT_VERSATILE select PLAT_VERSATILE_CLCD + select POWER_RESET + select POWER_RESET_VEXPRESS + select POWER_SUPPLY select REGULATOR_FIXED_VOLTAGE if REGULATOR select VEXPRESS_CONFIG help diff --git a/arch/arm/mach-vexpress/Makefile b/arch/arm/mach-vexpress/Makefile index 80b64971fbdd..42703e8b4d3b 100644 --- a/arch/arm/mach-vexpress/Makefile +++ b/arch/arm/mach-vexpress/Makefile @@ -4,7 +4,7 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \ -I$(srctree)/arch/arm/plat-versatile/include -obj-y := v2m.o reset.o +obj-y := v2m.o obj-$(CONFIG_ARCH_VEXPRESS_CA9X4) += ct-ca9x4.o obj-$(CONFIG_SMP) += platsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o diff --git a/arch/arm/mach-vexpress/hotplug.c b/arch/arm/mach-vexpress/hotplug.c index a141b98d84fe..f0ce6b8f5e71 100644 --- a/arch/arm/mach-vexpress/hotplug.c +++ b/arch/arm/mach-vexpress/hotplug.c @@ -12,7 +12,6 @@ #include <linux/errno.h> #include <linux/smp.h> -#include <asm/cacheflush.h> #include <asm/smp_plat.h> #include <asm/cp15.h> @@ -20,7 +19,6 @@ static inline void cpu_enter_lowpower(void) { unsigned int v; - flush_cache_all(); asm volatile( "mcr p15, 0, %1, c7, c5, 0\n" " mcr p15, 0, %1, c7, c10, 4\n" diff --git a/arch/arm/mach-vexpress/reset.c b/arch/arm/mach-vexpress/reset.c deleted file mode 100644 index 465923aa3819..000000000000 --- a/arch/arm/mach-vexpress/reset.c +++ /dev/null @@ -1,141 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Copyright (C) 2012 ARM Limited - */ - -#include <linux/jiffies.h> -#include <linux/of.h> -#include <linux/of_device.h> -#include <linux/platform_device.h> -#include <linux/stat.h> -#include <linux/vexpress.h> - -static void vexpress_reset_do(struct device *dev, const char *what) -{ - int err = -ENOENT; - struct vexpress_config_func *func = - vexpress_config_func_get_by_dev(dev); - - if (func) { - unsigned long timeout; - - err = vexpress_config_write(func, 0, 0); - - timeout = jiffies + HZ; - while (time_before(jiffies, timeout)) - cpu_relax(); - } - - dev_emerg(dev, "Unable to %s (%d)\n", what, err); -} - -static struct device *vexpress_power_off_device; - -void vexpress_power_off(void) -{ - vexpress_reset_do(vexpress_power_off_device, "power off"); -} - -static struct device *vexpress_restart_device; - -void vexpress_restart(char str, const char *cmd) -{ - vexpress_reset_do(vexpress_restart_device, "restart"); -} - -static ssize_t vexpress_reset_active_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - return sprintf(buf, "%d\n", vexpress_restart_device == dev); -} - -static ssize_t vexpress_reset_active_store(struct device *dev, - struct device_attribute *attr, const char *buf, size_t count) -{ - long value; - int err = kstrtol(buf, 0, &value); - - if (!err && value) - vexpress_restart_device = dev; - - return err ? err : count; -} - -DEVICE_ATTR(active, S_IRUGO | S_IWUSR, vexpress_reset_active_show, - vexpress_reset_active_store); - - -enum vexpress_reset_func { FUNC_RESET, FUNC_SHUTDOWN, FUNC_REBOOT }; - -static struct of_device_id vexpress_reset_of_match[] = { - { - .compatible = "arm,vexpress-reset", - .data = (void *)FUNC_RESET, - }, { - .compatible = "arm,vexpress-shutdown", - .data = (void *)FUNC_SHUTDOWN - }, { - .compatible = "arm,vexpress-reboot", - .data = (void *)FUNC_REBOOT - }, - {} -}; - -static int vexpress_reset_probe(struct platform_device *pdev) -{ - enum vexpress_reset_func func; - const struct of_device_id *match = - of_match_device(vexpress_reset_of_match, &pdev->dev); - - if (match) - func = (enum vexpress_reset_func)match->data; - else - func = pdev->id_entry->driver_data; - - switch (func) { - case FUNC_SHUTDOWN: - vexpress_power_off_device = &pdev->dev; - break; - case FUNC_RESET: - if (!vexpress_restart_device) - vexpress_restart_device = &pdev->dev; - device_create_file(&pdev->dev, &dev_attr_active); - break; - case FUNC_REBOOT: - vexpress_restart_device = &pdev->dev; - device_create_file(&pdev->dev, &dev_attr_active); - break; - }; - - return 0; -} - -static const struct platform_device_id vexpress_reset_id_table[] = { - { .name = "vexpress-reset", .driver_data = FUNC_RESET, }, - { .name = "vexpress-shutdown", .driver_data = FUNC_SHUTDOWN, }, - { .name = "vexpress-reboot", .driver_data = FUNC_REBOOT, }, - {} -}; - -static struct platform_driver vexpress_reset_driver = { - .probe = vexpress_reset_probe, - .driver = { - .name = "vexpress-reset", - .of_match_table = vexpress_reset_of_match, - }, - .id_table = vexpress_reset_id_table, -}; - -static int __init vexpress_reset_init(void) -{ - return platform_driver_register(&vexpress_reset_driver); -} -device_initcall(vexpress_reset_init); diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index 915683cb67d6..8802030df98d 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -1,10 +1,12 @@ /* * Versatile Express V2M Motherboard Support */ +#include <linux/clocksource.h> #include <linux/device.h> #include <linux/amba/bus.h> #include <linux/amba/mmci.h> #include <linux/io.h> +#include <linux/clocksource.h> #include <linux/smp.h> #include <linux/init.h> #include <linux/irqchip.h> @@ -21,11 +23,11 @@ #include <linux/regulator/fixed.h> #include <linux/regulator/machine.h> #include <linux/vexpress.h> +#include <linux/clk-provider.h> +#include <linux/clkdev.h> -#include <asm/arch_timer.h> #include <asm/mach-types.h> #include <asm/sizes.h> -#include <asm/smp_twd.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/time.h> @@ -61,9 +63,6 @@ static void __init v2m_sp804_init(void __iomem *base, unsigned int irq) if (WARN_ON(!base || irq == NO_IRQ)) return; - writel(0, base + TIMER_1_BASE + TIMER_CTRL); - writel(0, base + TIMER_2_BASE + TIMER_CTRL); - sp804_clocksource_init(base + TIMER_2_BASE, "v2m-timer1"); sp804_clockevents_init(base + TIMER_1_BASE, irq, "v2m-timer0"); } @@ -361,8 +360,6 @@ static void __init v2m_init(void) for (i = 0; i < ARRAY_SIZE(v2m_amba_devs); i++) amba_device_register(v2m_amba_devs[i], &iomem_resource); - pm_power_off = vexpress_power_off; - ct_desc->init_tile(); } @@ -374,7 +371,6 @@ MACHINE_START(VEXPRESS, "ARM-Versatile Express") .init_irq = v2m_init_irq, .init_time = v2m_timer_init, .init_machine = v2m_init, - .restart = vexpress_restart, MACHINE_END static struct map_desc v2m_rs1_io_desc __initdata = { @@ -431,25 +427,11 @@ void __init v2m_dt_init_early(void) static void __init v2m_dt_timer_init(void) { - struct device_node *node = NULL; - - vexpress_clk_of_init(); - - do { - node = of_find_compatible_node(node, NULL, "arm,sp804"); - } while (node && vexpress_get_site_by_node(node) != VEXPRESS_SITE_MB); - if (node) { - pr_info("Using SP804 '%s' as a clock & events source\n", - node->full_name); - v2m_sp804_init(of_iomap(node, 0), - irq_of_parse_and_map(node, 0)); - } + of_clk_init(NULL); - if (arch_timer_of_register() != 0) - twd_local_timer_of_register(); + clocksource_of_init(); - if (arch_timer_sched_clock_init() != 0) - versatile_sched_clock_init(vexpress_get_24mhz_clock_base(), + versatile_sched_clock_init(vexpress_get_24mhz_clock_base(), 24000000); } @@ -464,12 +446,10 @@ static void __init v2m_dt_init(void) { l2x0_of_init(0x00400000, 0xfe0fffff); of_platform_populate(NULL, v2m_dt_bus_match, NULL, NULL); - pm_power_off = vexpress_power_off; } static const char * const v2m_dt_match[] __initconst = { "arm,vexpress", - "xen,xenvm", NULL, }; @@ -481,5 +461,4 @@ DT_MACHINE_START(VEXPRESS_DT, "ARM-Versatile Express") .init_irq = irqchip_init, .init_time = v2m_dt_timer_init, .init_machine = v2m_dt_init, - .restart = vexpress_restart, MACHINE_END diff --git a/arch/arm/mach-virt/platsmp.c b/arch/arm/mach-virt/platsmp.c index 8badaabe70a1..f4143f5bfa5b 100644 --- a/arch/arm/mach-virt/platsmp.c +++ b/arch/arm/mach-virt/platsmp.c @@ -21,8 +21,6 @@ #include <linux/smp.h> #include <linux/of.h> -#include <linux/irqchip/arm-gic.h> - #include <asm/psci.h> #include <asm/smp_plat.h> @@ -45,14 +43,8 @@ static int __cpuinit virt_boot_secondary(unsigned int cpu, return -ENODEV; } -static void __cpuinit virt_secondary_init(unsigned int cpu) -{ - gic_secondary_init(0); -} - struct smp_operations __initdata virt_smp_ops = { .smp_init_cpus = virt_smp_init_cpus, .smp_prepare_cpus = virt_smp_prepare_cpus, - .smp_secondary_init = virt_secondary_init, .smp_boot_secondary = virt_boot_secondary, }; diff --git a/arch/arm/mach-virt/virt.c b/arch/arm/mach-virt/virt.c index 31666f6b4373..061f283f579e 100644 --- a/arch/arm/mach-virt/virt.c +++ b/arch/arm/mach-virt/virt.c @@ -23,23 +23,16 @@ #include <linux/of_platform.h> #include <linux/smp.h> -#include <asm/arch_timer.h> #include <asm/mach/arch.h> -#include <asm/mach/time.h> static void __init virt_init(void) { of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } -static void __init virt_timer_init(void) -{ - WARN_ON(arch_timer_of_register() != 0); - WARN_ON(arch_timer_sched_clock_init() != 0); -} - static const char *virt_dt_match[] = { "linux,dummy-virt", + "xen,xenvm", NULL }; @@ -47,7 +40,6 @@ extern struct smp_operations virt_smp_ops; DT_MACHINE_START(VIRT, "Dummy Virtual Machine") .init_irq = irqchip_init, - .init_time = virt_timer_init, .init_machine = virt_init, .smp = smp_ops(virt_smp_ops), .dt_compat = virt_dt_match, diff --git a/arch/arm/mach-vt8500/Kconfig b/arch/arm/mach-vt8500/Kconfig index e3e94b2fa145..9b252934b206 100644 --- a/arch/arm/mach-vt8500/Kconfig +++ b/arch/arm/mach-vt8500/Kconfig @@ -7,6 +7,7 @@ config ARCH_VT8500 select GENERIC_CLOCKEVENTS select HAVE_CLK select VT8500_TIMER + select PINCTRL help Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip. diff --git a/arch/arm/mach-vt8500/Makefile b/arch/arm/mach-vt8500/Makefile index 92ceb2436b60..4c8a84637594 100644 --- a/arch/arm/mach-vt8500/Makefile +++ b/arch/arm/mach-vt8500/Makefile @@ -1 +1 @@ -obj-$(CONFIG_ARCH_VT8500) += irq.o vt8500.o +obj-$(CONFIG_ARCH_VT8500) += vt8500.o diff --git a/arch/arm/mach-vt8500/common.h b/arch/arm/mach-vt8500/common.h index 77611a6968d6..087787af62f1 100644 --- a/arch/arm/mach-vt8500/common.h +++ b/arch/arm/mach-vt8500/common.h @@ -18,13 +18,7 @@ #include <linux/of.h> -int __init vt8500_irq_init(struct device_node *node, - struct device_node *parent); - /* defined in drivers/clk/clk-vt8500.c */ void __init vtwm_clk_init(void __iomem *pmc_base); -/* defined in irq.c */ -asmlinkage void vt8500_handle_irq(struct pt_regs *regs); - #endif diff --git a/arch/arm/mach-vt8500/irq.c b/arch/arm/mach-vt8500/irq.c deleted file mode 100644 index b9cf5ce9efbb..000000000000 --- a/arch/arm/mach-vt8500/irq.c +++ /dev/null @@ -1,253 +0,0 @@ -/* - * arch/arm/mach-vt8500/irq.c - * - * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz> - * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -/* - * This file is copied and modified from the original irq.c provided by - * Alexey Charkov. Minor changes have been made for Device Tree Support. - */ - -#include <linux/slab.h> -#include <linux/io.h> -#include <linux/irq.h> -#include <linux/irqdomain.h> -#include <linux/interrupt.h> -#include <linux/bitops.h> - -#include <linux/of.h> -#include <linux/of_irq.h> -#include <linux/of_address.h> - -#include <asm/irq.h> -#include <asm/exception.h> - -#define VT8500_ICPC_IRQ 0x20 -#define VT8500_ICPC_FIQ 0x24 -#define VT8500_ICDC 0x40 /* Destination Control 64*u32 */ -#define VT8500_ICIS 0x80 /* Interrupt status, 16*u32 */ - -/* ICPC */ -#define ICPC_MASK 0x3F -#define ICPC_ROTATE BIT(6) - -/* IC_DCTR */ -#define ICDC_IRQ 0x00 -#define ICDC_FIQ 0x01 -#define ICDC_DSS0 0x02 -#define ICDC_DSS1 0x03 -#define ICDC_DSS2 0x04 -#define ICDC_DSS3 0x05 -#define ICDC_DSS4 0x06 -#define ICDC_DSS5 0x07 - -#define VT8500_INT_DISABLE 0 -#define VT8500_INT_ENABLE BIT(3) - -#define VT8500_TRIGGER_HIGH 0 -#define VT8500_TRIGGER_RISING BIT(5) -#define VT8500_TRIGGER_FALLING BIT(6) -#define VT8500_EDGE ( VT8500_TRIGGER_RISING \ - | VT8500_TRIGGER_FALLING) - -/* vt8500 has 1 intc, wm8505 and wm8650 have 2 */ -#define VT8500_INTC_MAX 2 - -struct vt8500_irq_data { - void __iomem *base; /* IO Memory base address */ - struct irq_domain *domain; /* Domain for this controller */ -}; - -/* Global variable for accessing io-mem addresses */ -static struct vt8500_irq_data intc[VT8500_INTC_MAX]; -static u32 active_cnt = 0; - -static void vt8500_irq_mask(struct irq_data *d) -{ - struct vt8500_irq_data *priv = d->domain->host_data; - void __iomem *base = priv->base; - void __iomem *stat_reg = base + VT8500_ICIS + (d->hwirq < 32 ? 0 : 4); - u8 edge, dctr; - u32 status; - - edge = readb(base + VT8500_ICDC + d->hwirq) & VT8500_EDGE; - if (edge) { - status = readl(stat_reg); - - status |= (1 << (d->hwirq & 0x1f)); - writel(status, stat_reg); - } else { - dctr = readb(base + VT8500_ICDC + d->hwirq); - dctr &= ~VT8500_INT_ENABLE; - writeb(dctr, base + VT8500_ICDC + d->hwirq); - } -} - -static void vt8500_irq_unmask(struct irq_data *d) -{ - struct vt8500_irq_data *priv = d->domain->host_data; - void __iomem *base = priv->base; - u8 dctr; - - dctr = readb(base + VT8500_ICDC + d->hwirq); - dctr |= VT8500_INT_ENABLE; - writeb(dctr, base + VT8500_ICDC + d->hwirq); -} - -static int vt8500_irq_set_type(struct irq_data *d, unsigned int flow_type) -{ - struct vt8500_irq_data *priv = d->domain->host_data; - void __iomem *base = priv->base; - u8 dctr; - - dctr = readb(base + VT8500_ICDC + d->hwirq); - dctr &= ~VT8500_EDGE; - - switch (flow_type) { - case IRQF_TRIGGER_LOW: - return -EINVAL; - case IRQF_TRIGGER_HIGH: - dctr |= VT8500_TRIGGER_HIGH; - __irq_set_handler_locked(d->irq, handle_level_irq); - break; - case IRQF_TRIGGER_FALLING: - dctr |= VT8500_TRIGGER_FALLING; - __irq_set_handler_locked(d->irq, handle_edge_irq); - break; - case IRQF_TRIGGER_RISING: - dctr |= VT8500_TRIGGER_RISING; - __irq_set_handler_locked(d->irq, handle_edge_irq); - break; - } - writeb(dctr, base + VT8500_ICDC + d->hwirq); - - return 0; -} - -static struct irq_chip vt8500_irq_chip = { - .name = "vt8500", - .irq_ack = vt8500_irq_mask, - .irq_mask = vt8500_irq_mask, - .irq_unmask = vt8500_irq_unmask, - .irq_set_type = vt8500_irq_set_type, -}; - -static void __init vt8500_init_irq_hw(void __iomem *base) -{ - u32 i; - - /* Enable rotating priority for IRQ */ - writel(ICPC_ROTATE, base + VT8500_ICPC_IRQ); - writel(0x00, base + VT8500_ICPC_FIQ); - - /* Disable all interrupts and route them to IRQ */ - for (i = 0; i < 64; i++) - writeb(VT8500_INT_DISABLE | ICDC_IRQ, base + VT8500_ICDC + i); -} - -static int vt8500_irq_map(struct irq_domain *h, unsigned int virq, - irq_hw_number_t hw) -{ - irq_set_chip_and_handler(virq, &vt8500_irq_chip, handle_level_irq); - set_irq_flags(virq, IRQF_VALID); - - return 0; -} - -static struct irq_domain_ops vt8500_irq_domain_ops = { - .map = vt8500_irq_map, - .xlate = irq_domain_xlate_onecell, -}; - -asmlinkage void __exception_irq_entry vt8500_handle_irq(struct pt_regs *regs) -{ - u32 stat, i; - int irqnr, virq; - void __iomem *base; - - /* Loop through each active controller */ - for (i=0; i<active_cnt; i++) { - base = intc[i].base; - irqnr = readl_relaxed(base) & 0x3F; - /* - Highest Priority register default = 63, so check that this - is a real interrupt by checking the status register - */ - if (irqnr == 63) { - stat = readl_relaxed(base + VT8500_ICIS + 4); - if (!(stat & BIT(31))) - continue; - } - - virq = irq_find_mapping(intc[i].domain, irqnr); - handle_IRQ(virq, regs); - } -} - -int __init vt8500_irq_init(struct device_node *node, struct device_node *parent) -{ - int irq, i; - struct device_node *np = node; - - if (active_cnt == VT8500_INTC_MAX) { - pr_err("%s: Interrupt controllers > VT8500_INTC_MAX\n", - __func__); - goto out; - } - - intc[active_cnt].base = of_iomap(np, 0); - intc[active_cnt].domain = irq_domain_add_linear(node, 64, - &vt8500_irq_domain_ops, &intc[active_cnt]); - - if (!intc[active_cnt].base) { - pr_err("%s: Unable to map IO memory\n", __func__); - goto out; - } - - if (!intc[active_cnt].domain) { - pr_err("%s: Unable to add irq domain!\n", __func__); - goto out; - } - - vt8500_init_irq_hw(intc[active_cnt].base); - - pr_info("vt8500-irq: Added interrupt controller\n"); - - active_cnt++; - - /* check if this is a slaved controller */ - if (of_irq_count(np) != 0) { - /* check that we have the correct number of interrupts */ - if (of_irq_count(np) != 8) { - pr_err("%s: Incorrect IRQ map for slaved controller\n", - __func__); - return -EINVAL; - } - - for (i = 0; i < 8; i++) { - irq = irq_of_parse_and_map(np, i); - enable_irq(irq); - } - - pr_info("vt8500-irq: Enabled slave->parent interrupts\n"); - } -out: - return 0; -} - diff --git a/arch/arm/mach-vt8500/vt8500.c b/arch/arm/mach-vt8500/vt8500.c index 49e80053d828..1dd281efc020 100644 --- a/arch/arm/mach-vt8500/vt8500.c +++ b/arch/arm/mach-vt8500/vt8500.c @@ -20,6 +20,7 @@ #include <linux/clocksource.h> #include <linux/io.h> +#include <linux/irqchip.h> #include <linux/pm.h> #include <asm/mach-types.h> @@ -166,16 +167,6 @@ void __init vt8500_init(void) of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } -static const struct of_device_id vt8500_irq_match[] __initconst = { - { .compatible = "via,vt8500-intc", .data = vt8500_irq_init, }, - { /* sentinel */ }, -}; - -static void __init vt8500_init_irq(void) -{ - of_irq_init(vt8500_irq_match); -}; - static const char * const vt8500_dt_compat[] = { "via,vt8500", "wm,wm8650", @@ -187,10 +178,9 @@ static const char * const vt8500_dt_compat[] = { DT_MACHINE_START(WMT_DT, "VIA/Wondermedia SoC (Device Tree Support)") .dt_compat = vt8500_dt_compat, .map_io = vt8500_map_io, - .init_irq = vt8500_init_irq, + .init_irq = irqchip_init, .init_machine = vt8500_init, .init_time = clocksource_of_init, .restart = vt8500_restart, - .handle_irq = vt8500_handle_irq, MACHINE_END diff --git a/arch/arm/mach-w90x900/dev.c b/arch/arm/mach-w90x900/dev.c index 7abdb9645c5b..e65a80a1ac75 100644 --- a/arch/arm/mach-w90x900/dev.c +++ b/arch/arm/mach-w90x900/dev.c @@ -19,6 +19,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/slab.h> +#include <linux/cpu.h> #include <linux/mtd/physmap.h> #include <linux/mtd/mtd.h> @@ -531,7 +532,7 @@ static struct platform_device *nuc900_public_dev[] __initdata = { void __init nuc900_board_init(struct platform_device **device, int size) { - disable_hlt(); + cpu_idle_poll_ctrl(true); platform_add_devices(device, size); platform_add_devices(nuc900_public_dev, ARRAY_SIZE(nuc900_public_dev)); spi_register_board_info(nuc900_spi_board_info, diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig index adb6c0ea0e53..c1d61f281e68 100644 --- a/arch/arm/mach-zynq/Kconfig +++ b/arch/arm/mach-zynq/Kconfig @@ -5,9 +5,13 @@ config ARCH_ZYNQ select COMMON_CLK select CPU_V7 select GENERIC_CLOCKEVENTS + select HAVE_ARM_SCU if SMP + select HAVE_ARM_TWD if LOCAL_TIMERS select ICST select MIGHT_HAVE_CACHE_L2X0 select USE_OF + select HAVE_SMP select SPARSE_IRQ + select CADENCE_TTC_TIMER help Support for Xilinx Zynq ARM Cortex A9 Platform diff --git a/arch/arm/mach-zynq/Makefile b/arch/arm/mach-zynq/Makefile index 397268c1b250..1b25d92ebf22 100644 --- a/arch/arm/mach-zynq/Makefile +++ b/arch/arm/mach-zynq/Makefile @@ -3,4 +3,8 @@ # # Common support -obj-y := common.o timer.o +obj-y := common.o slcr.o +CFLAGS_REMOVE_hotplug.o =-march=armv6k +CFLAGS_hotplug.o =-Wa,-march=armv7-a -mcpu=cortex-a9 +obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o +obj-$(CONFIG_SMP) += headsmp.o platsmp.o diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c index 5c8983218183..5bfe7035b73d 100644 --- a/arch/arm/mach-zynq/common.c +++ b/arch/arm/mach-zynq/common.c @@ -20,6 +20,7 @@ #include <linux/platform_device.h> #include <linux/clk.h> #include <linux/clk/zynq.h> +#include <linux/clocksource.h> #include <linux/of_address.h> #include <linux/of_irq.h> #include <linux/of_platform.h> @@ -32,20 +33,23 @@ #include <asm/mach-types.h> #include <asm/page.h> #include <asm/pgtable.h> +#include <asm/smp_scu.h> #include <asm/hardware/cache-l2x0.h> #include "common.h" +void __iomem *zynq_scu_base; + static struct of_device_id zynq_of_bus_ids[] __initdata = { { .compatible = "simple-bus", }, {} }; /** - * xilinx_init_machine() - System specific initialization, intended to be - * called from board specific initialization. + * zynq_init_machine - System specific initialization, intended to be + * called from board specific initialization. */ -static void __init xilinx_init_machine(void) +static void __init zynq_init_machine(void) { /* * 64KB way size, 8-way associativity, parity disabled @@ -55,50 +59,56 @@ static void __init xilinx_init_machine(void) of_platform_bus_probe(NULL, zynq_of_bus_ids, NULL); } -#define SCU_PERIPH_PHYS 0xF8F00000 -#define SCU_PERIPH_SIZE SZ_8K -#define SCU_PERIPH_VIRT (VMALLOC_END - SCU_PERIPH_SIZE) +static void __init zynq_timer_init(void) +{ + zynq_slcr_init(); + clocksource_of_init(); +} -static struct map_desc scu_desc __initdata = { - .virtual = SCU_PERIPH_VIRT, - .pfn = __phys_to_pfn(SCU_PERIPH_PHYS), - .length = SCU_PERIPH_SIZE, - .type = MT_DEVICE, +static struct map_desc zynq_cortex_a9_scu_map __initdata = { + .length = SZ_256, + .type = MT_DEVICE, }; -static void __init xilinx_zynq_timer_init(void) +static void __init zynq_scu_map_io(void) { - struct device_node *np; - void __iomem *slcr; - - np = of_find_compatible_node(NULL, NULL, "xlnx,zynq-slcr"); - slcr = of_iomap(np, 0); - WARN_ON(!slcr); + unsigned long base; - xilinx_zynq_clocks_init(slcr); - - xttcps_timer_init(); + base = scu_a9_get_base(); + zynq_cortex_a9_scu_map.pfn = __phys_to_pfn(base); + /* Expected address is in vmalloc area that's why simple assign here */ + zynq_cortex_a9_scu_map.virtual = base; + iotable_init(&zynq_cortex_a9_scu_map, 1); + zynq_scu_base = (void __iomem *)base; + BUG_ON(!zynq_scu_base); } /** - * xilinx_map_io() - Create memory mappings needed for early I/O. + * zynq_map_io - Create memory mappings needed for early I/O. */ -static void __init xilinx_map_io(void) +static void __init zynq_map_io(void) { debug_ll_io_init(); - iotable_init(&scu_desc, 1); + zynq_scu_map_io(); +} + +static void zynq_system_reset(char mode, const char *cmd) +{ + zynq_slcr_system_reset(); } -static const char *xilinx_dt_match[] = { +static const char * const zynq_dt_match[] = { "xlnx,zynq-zc702", "xlnx,zynq-7000", NULL }; MACHINE_START(XILINX_EP107, "Xilinx Zynq Platform") - .map_io = xilinx_map_io, + .smp = smp_ops(zynq_smp_ops), + .map_io = zynq_map_io, .init_irq = irqchip_init, - .init_machine = xilinx_init_machine, - .init_time = xilinx_zynq_timer_init, - .dt_compat = xilinx_dt_match, + .init_machine = zynq_init_machine, + .init_time = zynq_timer_init, + .dt_compat = zynq_dt_match, + .restart = zynq_system_reset, MACHINE_END diff --git a/arch/arm/mach-zynq/common.h b/arch/arm/mach-zynq/common.h index 8b4dbbaa01cf..fbbd0e21c404 100644 --- a/arch/arm/mach-zynq/common.h +++ b/arch/arm/mach-zynq/common.h @@ -17,6 +17,24 @@ #ifndef __MACH_ZYNQ_COMMON_H__ #define __MACH_ZYNQ_COMMON_H__ -void __init xttcps_timer_init(void); +extern int zynq_slcr_init(void); +extern void zynq_slcr_system_reset(void); +extern void zynq_slcr_cpu_stop(int cpu); +extern void zynq_slcr_cpu_start(int cpu); + +#ifdef CONFIG_SMP +extern void secondary_startup(void); +extern char zynq_secondary_trampoline; +extern char zynq_secondary_trampoline_jump; +extern char zynq_secondary_trampoline_end; +extern int __cpuinit zynq_cpun_start(u32 address, int cpu); +extern struct smp_operations zynq_smp_ops __initdata; +#endif + +extern void __iomem *zynq_slcr_base; +extern void __iomem *zynq_scu_base; + +/* Hotplug */ +extern void zynq_platform_cpu_die(unsigned int cpu); #endif diff --git a/arch/arm/mach-zynq/headsmp.S b/arch/arm/mach-zynq/headsmp.S new file mode 100644 index 000000000000..d183cd234a9b --- /dev/null +++ b/arch/arm/mach-zynq/headsmp.S @@ -0,0 +1,24 @@ +/* + * Copyright (c) 2013 Steffen Trumtrar <s.trumtrar@pengutronix.de> + * Copyright (c) 2012-2013 Xilinx + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/linkage.h> +#include <linux/init.h> + + __CPUINIT + +ENTRY(zynq_secondary_trampoline) + ldr r0, [pc] + bx r0 +.globl zynq_secondary_trampoline_jump +zynq_secondary_trampoline_jump: + /* Space for jumping address */ + .word /* cpu 1 */ +.globl zynq_secondary_trampoline_end +zynq_secondary_trampoline_end: + +ENDPROC(zynq_secondary_trampoline) diff --git a/arch/arm/mach-zynq/hotplug.c b/arch/arm/mach-zynq/hotplug.c new file mode 100644 index 000000000000..c89672bd1de2 --- /dev/null +++ b/arch/arm/mach-zynq/hotplug.c @@ -0,0 +1,104 @@ +/* + * Copyright (C) 2012-2013 Xilinx + * + * based on linux/arch/arm/mach-realview/hotplug.c + * + * Copyright (C) 2002 ARM Ltd. + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/smp.h> + +#include <asm/cacheflush.h> +#include <asm/cp15.h> +#include "common.h" + +static inline void zynq_cpu_enter_lowpower(void) +{ + unsigned int v; + + flush_cache_all(); + asm volatile( + " mcr p15, 0, %1, c7, c5, 0\n" + " dsb\n" + /* + * Turn off coherency + */ + " mrc p15, 0, %0, c1, c0, 1\n" + " bic %0, %0, #0x40\n" + " mcr p15, 0, %0, c1, c0, 1\n" + " mrc p15, 0, %0, c1, c0, 0\n" + " bic %0, %0, %2\n" + " mcr p15, 0, %0, c1, c0, 0\n" + : "=&r" (v) + : "r" (0), "Ir" (CR_C) + : "cc"); +} + +static inline void zynq_cpu_leave_lowpower(void) +{ + unsigned int v; + + asm volatile( + " mrc p15, 0, %0, c1, c0, 0\n" + " orr %0, %0, %1\n" + " mcr p15, 0, %0, c1, c0, 0\n" + " mrc p15, 0, %0, c1, c0, 1\n" + " orr %0, %0, #0x40\n" + " mcr p15, 0, %0, c1, c0, 1\n" + : "=&r" (v) + : "Ir" (CR_C) + : "cc"); +} + +static inline void zynq_platform_do_lowpower(unsigned int cpu, int *spurious) +{ + /* + * there is no power-control hardware on this platform, so all + * we can do is put the core into WFI; this is safe as the calling + * code will have already disabled interrupts + */ + for (;;) { + dsb(); + wfi(); + + /* + * Getting here, means that we have come out of WFI without + * having been woken up - this shouldn't happen + * + * Just note it happening - when we're woken, we can report + * its occurrence. + */ + (*spurious)++; + } +} + +/* + * platform-specific code to shutdown a CPU + * + * Called with IRQs disabled + */ +void zynq_platform_cpu_die(unsigned int cpu) +{ + int spurious = 0; + + /* + * we're ready for shutdown now, so do it + */ + zynq_cpu_enter_lowpower(); + zynq_platform_do_lowpower(cpu, &spurious); + + /* + * bring this CPU back into the world of cache + * coherency, and then restore interrupts + */ + zynq_cpu_leave_lowpower(); + + if (spurious) + pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious); +} diff --git a/arch/arm/mach-zynq/platsmp.c b/arch/arm/mach-zynq/platsmp.c new file mode 100644 index 000000000000..5fc167e07619 --- /dev/null +++ b/arch/arm/mach-zynq/platsmp.c @@ -0,0 +1,136 @@ +/* + * This file contains Xilinx specific SMP code, used to start up + * the second processor. + * + * Copyright (C) 2011-2013 Xilinx + * + * based on linux/arch/arm/mach-realview/platsmp.c + * + * Copyright (C) 2002 ARM Ltd. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/export.h> +#include <linux/jiffies.h> +#include <linux/init.h> +#include <linux/io.h> +#include <asm/cacheflush.h> +#include <asm/smp_scu.h> +#include <linux/irqchip/arm-gic.h> +#include "common.h" + +/* + * Store number of cores in the system + * Because of scu_get_core_count() must be in __init section and can't + * be called from zynq_cpun_start() because it is in __cpuinit section. + */ +static int ncores; + +int __cpuinit zynq_cpun_start(u32 address, int cpu) +{ + u32 trampoline_code_size = &zynq_secondary_trampoline_end - + &zynq_secondary_trampoline; + + if (cpu > ncores) { + pr_warn("CPU No. is not available in the system\n"); + return -1; + } + + /* MS: Expectation that SLCR are directly map and accessible */ + /* Not possible to jump to non aligned address */ + if (!(address & 3) && (!address || (address >= trampoline_code_size))) { + /* Store pointer to ioremap area which points to address 0x0 */ + static u8 __iomem *zero; + u32 trampoline_size = &zynq_secondary_trampoline_jump - + &zynq_secondary_trampoline; + + zynq_slcr_cpu_stop(cpu); + + if (__pa(PAGE_OFFSET)) { + zero = ioremap(0, trampoline_code_size); + if (!zero) { + pr_warn("BOOTUP jump vectors not accessible\n"); + return -1; + } + } else { + zero = (__force u8 __iomem *)PAGE_OFFSET; + } + + /* + * This is elegant way how to jump to any address + * 0x0: Load address at 0x8 to r0 + * 0x4: Jump by mov instruction + * 0x8: Jumping address + */ + memcpy((__force void *)zero, &zynq_secondary_trampoline, + trampoline_size); + writel(address, zero + trampoline_size); + + flush_cache_all(); + outer_flush_range(0, trampoline_code_size); + smp_wmb(); + + if (__pa(PAGE_OFFSET)) + iounmap(zero); + + zynq_slcr_cpu_start(cpu); + + return 0; + } + + pr_warn("Can't start CPU%d: Wrong starting address %x\n", cpu, address); + + return -1; +} +EXPORT_SYMBOL(zynq_cpun_start); + +static int __cpuinit zynq_boot_secondary(unsigned int cpu, + struct task_struct *idle) +{ + return zynq_cpun_start(virt_to_phys(secondary_startup), cpu); +} + +/* + * Initialise the CPU possible map early - this describes the CPUs + * which may be present or become present in the system. + */ +static void __init zynq_smp_init_cpus(void) +{ + int i; + + ncores = scu_get_core_count(zynq_scu_base); + + for (i = 0; i < ncores && i < CONFIG_NR_CPUS; i++) + set_cpu_possible(i, true); +} + +static void __init zynq_smp_prepare_cpus(unsigned int max_cpus) +{ + int i; + + /* + * Initialise the present map, which describes the set of CPUs + * actually populated at the present time. + */ + for (i = 0; i < max_cpus; i++) + set_cpu_present(i, true); + + scu_enable(zynq_scu_base); +} + +struct smp_operations zynq_smp_ops __initdata = { + .smp_init_cpus = zynq_smp_init_cpus, + .smp_prepare_cpus = zynq_smp_prepare_cpus, + .smp_boot_secondary = zynq_boot_secondary, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_die = zynq_platform_cpu_die, +#endif +}; diff --git a/arch/arm/mach-zynq/slcr.c b/arch/arm/mach-zynq/slcr.c new file mode 100644 index 000000000000..c70969b9c258 --- /dev/null +++ b/arch/arm/mach-zynq/slcr.c @@ -0,0 +1,125 @@ +/* + * Xilinx SLCR driver + * + * Copyright (c) 2011-2013 Xilinx Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * You should have received a copy of the GNU General Public + * License along with this program; if not, write to the Free + * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA + * 02139, USA. + */ + +#include <linux/export.h> +#include <linux/io.h> +#include <linux/fs.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/uaccess.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/clk/zynq.h> +#include "common.h" + +#define SLCR_UNLOCK_MAGIC 0xDF0D +#define SLCR_UNLOCK 0x8 /* SCLR unlock register */ + +#define SLCR_PS_RST_CTRL_OFFSET 0x200 /* PS Software Reset Control */ + +#define SLCR_A9_CPU_CLKSTOP 0x10 +#define SLCR_A9_CPU_RST 0x1 + +#define SLCR_A9_CPU_RST_CTRL 0x244 /* CPU Software Reset Control */ +#define SLCR_REBOOT_STATUS 0x258 /* PS Reboot Status */ + +void __iomem *zynq_slcr_base; + +/** + * zynq_slcr_system_reset - Reset the entire system. + */ +void zynq_slcr_system_reset(void) +{ + u32 reboot; + + /* + * Unlock the SLCR then reset the system. + * Note that this seems to require raw i/o + * functions or there's a lockup? + */ + writel(SLCR_UNLOCK_MAGIC, zynq_slcr_base + SLCR_UNLOCK); + + /* + * Clear 0x0F000000 bits of reboot status register to workaround + * the FSBL not loading the bitstream after soft-reboot + * This is a temporary solution until we know more. + */ + reboot = readl(zynq_slcr_base + SLCR_REBOOT_STATUS); + writel(reboot & 0xF0FFFFFF, zynq_slcr_base + SLCR_REBOOT_STATUS); + writel(1, zynq_slcr_base + SLCR_PS_RST_CTRL_OFFSET); +} + +/** + * zynq_slcr_cpu_start - Start cpu + * @cpu: cpu number + */ +void zynq_slcr_cpu_start(int cpu) +{ + /* enable CPUn */ + writel(SLCR_A9_CPU_CLKSTOP << cpu, + zynq_slcr_base + SLCR_A9_CPU_RST_CTRL); + /* enable CLK for CPUn */ + writel(0x0 << cpu, zynq_slcr_base + SLCR_A9_CPU_RST_CTRL); +} + +/** + * zynq_slcr_cpu_stop - Stop cpu + * @cpu: cpu number + */ +void zynq_slcr_cpu_stop(int cpu) +{ + /* stop CLK and reset CPUn */ + writel((SLCR_A9_CPU_CLKSTOP | SLCR_A9_CPU_RST) << cpu, + zynq_slcr_base + SLCR_A9_CPU_RST_CTRL); +} + +/** + * zynq_slcr_init + * Returns 0 on success, negative errno otherwise. + * + * Called early during boot from platform code to remap SLCR area. + */ +int __init zynq_slcr_init(void) +{ + struct device_node *np; + + np = of_find_compatible_node(NULL, NULL, "xlnx,zynq-slcr"); + if (!np) { + pr_err("%s: no slcr node found\n", __func__); + BUG(); + } + + zynq_slcr_base = of_iomap(np, 0); + if (!zynq_slcr_base) { + pr_err("%s: Unable to map I/O memory\n", __func__); + BUG(); + } + + /* unlock the SLCR so that registers can be changed */ + writel(SLCR_UNLOCK_MAGIC, zynq_slcr_base + SLCR_UNLOCK); + + pr_info("%s mapped to %p\n", np->name, zynq_slcr_base); + + xilinx_zynq_clocks_init(zynq_slcr_base); + + of_node_put(np); + + return 0; +} diff --git a/arch/arm/mach-zynq/timer.c b/arch/arm/mach-zynq/timer.c deleted file mode 100644 index f9fbc9c1e7a6..000000000000 --- a/arch/arm/mach-zynq/timer.c +++ /dev/null @@ -1,324 +0,0 @@ -/* - * This file contains driver for the Xilinx PS Timer Counter IP. - * - * Copyright (C) 2011 Xilinx - * - * based on arch/mips/kernel/time.c timer driver - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/interrupt.h> -#include <linux/clockchips.h> -#include <linux/of_address.h> -#include <linux/of_irq.h> -#include <linux/slab.h> -#include <linux/clk-provider.h> -#include "common.h" - -/* - * Timer Register Offset Definitions of Timer 1, Increment base address by 4 - * and use same offsets for Timer 2 - */ -#define XTTCPS_CLK_CNTRL_OFFSET 0x00 /* Clock Control Reg, RW */ -#define XTTCPS_CNT_CNTRL_OFFSET 0x0C /* Counter Control Reg, RW */ -#define XTTCPS_COUNT_VAL_OFFSET 0x18 /* Counter Value Reg, RO */ -#define XTTCPS_INTR_VAL_OFFSET 0x24 /* Interval Count Reg, RW */ -#define XTTCPS_ISR_OFFSET 0x54 /* Interrupt Status Reg, RO */ -#define XTTCPS_IER_OFFSET 0x60 /* Interrupt Enable Reg, RW */ - -#define XTTCPS_CNT_CNTRL_DISABLE_MASK 0x1 - -/* - * Setup the timers to use pre-scaling, using a fixed value for now that will - * work across most input frequency, but it may need to be more dynamic - */ -#define PRESCALE_EXPONENT 11 /* 2 ^ PRESCALE_EXPONENT = PRESCALE */ -#define PRESCALE 2048 /* The exponent must match this */ -#define CLK_CNTRL_PRESCALE ((PRESCALE_EXPONENT - 1) << 1) -#define CLK_CNTRL_PRESCALE_EN 1 -#define CNT_CNTRL_RESET (1<<4) - -/** - * struct xttcps_timer - This definition defines local timer structure - * - * @base_addr: Base address of timer - **/ -struct xttcps_timer { - void __iomem *base_addr; -}; - -struct xttcps_timer_clocksource { - struct xttcps_timer xttc; - struct clocksource cs; -}; - -#define to_xttcps_timer_clksrc(x) \ - container_of(x, struct xttcps_timer_clocksource, cs) - -struct xttcps_timer_clockevent { - struct xttcps_timer xttc; - struct clock_event_device ce; - struct clk *clk; -}; - -#define to_xttcps_timer_clkevent(x) \ - container_of(x, struct xttcps_timer_clockevent, ce) - -/** - * xttcps_set_interval - Set the timer interval value - * - * @timer: Pointer to the timer instance - * @cycles: Timer interval ticks - **/ -static void xttcps_set_interval(struct xttcps_timer *timer, - unsigned long cycles) -{ - u32 ctrl_reg; - - /* Disable the counter, set the counter value and re-enable counter */ - ctrl_reg = __raw_readl(timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET); - ctrl_reg |= XTTCPS_CNT_CNTRL_DISABLE_MASK; - __raw_writel(ctrl_reg, timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET); - - __raw_writel(cycles, timer->base_addr + XTTCPS_INTR_VAL_OFFSET); - - /* - * Reset the counter (0x10) so that it starts from 0, one-shot - * mode makes this needed for timing to be right. - */ - ctrl_reg |= CNT_CNTRL_RESET; - ctrl_reg &= ~XTTCPS_CNT_CNTRL_DISABLE_MASK; - __raw_writel(ctrl_reg, timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET); -} - -/** - * xttcps_clock_event_interrupt - Clock event timer interrupt handler - * - * @irq: IRQ number of the Timer - * @dev_id: void pointer to the xttcps_timer instance - * - * returns: Always IRQ_HANDLED - success - **/ -static irqreturn_t xttcps_clock_event_interrupt(int irq, void *dev_id) -{ - struct xttcps_timer_clockevent *xttce = dev_id; - struct xttcps_timer *timer = &xttce->xttc; - - /* Acknowledge the interrupt and call event handler */ - __raw_readl(timer->base_addr + XTTCPS_ISR_OFFSET); - - xttce->ce.event_handler(&xttce->ce); - - return IRQ_HANDLED; -} - -/** - * __xttc_clocksource_read - Reads the timer counter register - * - * returns: Current timer counter register value - **/ -static cycle_t __xttc_clocksource_read(struct clocksource *cs) -{ - struct xttcps_timer *timer = &to_xttcps_timer_clksrc(cs)->xttc; - - return (cycle_t)__raw_readl(timer->base_addr + - XTTCPS_COUNT_VAL_OFFSET); -} - -/** - * xttcps_set_next_event - Sets the time interval for next event - * - * @cycles: Timer interval ticks - * @evt: Address of clock event instance - * - * returns: Always 0 - success - **/ -static int xttcps_set_next_event(unsigned long cycles, - struct clock_event_device *evt) -{ - struct xttcps_timer_clockevent *xttce = to_xttcps_timer_clkevent(evt); - struct xttcps_timer *timer = &xttce->xttc; - - xttcps_set_interval(timer, cycles); - return 0; -} - -/** - * xttcps_set_mode - Sets the mode of timer - * - * @mode: Mode to be set - * @evt: Address of clock event instance - **/ -static void xttcps_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) -{ - struct xttcps_timer_clockevent *xttce = to_xttcps_timer_clkevent(evt); - struct xttcps_timer *timer = &xttce->xttc; - u32 ctrl_reg; - - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - xttcps_set_interval(timer, - DIV_ROUND_CLOSEST(clk_get_rate(xttce->clk), - PRESCALE * HZ)); - break; - case CLOCK_EVT_MODE_ONESHOT: - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_SHUTDOWN: - ctrl_reg = __raw_readl(timer->base_addr + - XTTCPS_CNT_CNTRL_OFFSET); - ctrl_reg |= XTTCPS_CNT_CNTRL_DISABLE_MASK; - __raw_writel(ctrl_reg, - timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET); - break; - case CLOCK_EVT_MODE_RESUME: - ctrl_reg = __raw_readl(timer->base_addr + - XTTCPS_CNT_CNTRL_OFFSET); - ctrl_reg &= ~XTTCPS_CNT_CNTRL_DISABLE_MASK; - __raw_writel(ctrl_reg, - timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET); - break; - } -} - -static void __init zynq_ttc_setup_clocksource(struct device_node *np, - void __iomem *base) -{ - struct xttcps_timer_clocksource *ttccs; - struct clk *clk; - int err; - u32 reg; - - ttccs = kzalloc(sizeof(*ttccs), GFP_KERNEL); - if (WARN_ON(!ttccs)) - return; - - err = of_property_read_u32(np, "reg", ®); - if (WARN_ON(err)) - return; - - clk = of_clk_get_by_name(np, "cpu_1x"); - if (WARN_ON(IS_ERR(clk))) - return; - - err = clk_prepare_enable(clk); - if (WARN_ON(err)) - return; - - ttccs->xttc.base_addr = base + reg * 4; - - ttccs->cs.name = np->name; - ttccs->cs.rating = 200; - ttccs->cs.read = __xttc_clocksource_read; - ttccs->cs.mask = CLOCKSOURCE_MASK(16); - ttccs->cs.flags = CLOCK_SOURCE_IS_CONTINUOUS; - - __raw_writel(0x0, ttccs->xttc.base_addr + XTTCPS_IER_OFFSET); - __raw_writel(CLK_CNTRL_PRESCALE | CLK_CNTRL_PRESCALE_EN, - ttccs->xttc.base_addr + XTTCPS_CLK_CNTRL_OFFSET); - __raw_writel(CNT_CNTRL_RESET, - ttccs->xttc.base_addr + XTTCPS_CNT_CNTRL_OFFSET); - - err = clocksource_register_hz(&ttccs->cs, clk_get_rate(clk) / PRESCALE); - if (WARN_ON(err)) - return; -} - -static void __init zynq_ttc_setup_clockevent(struct device_node *np, - void __iomem *base) -{ - struct xttcps_timer_clockevent *ttcce; - int err, irq; - u32 reg; - - ttcce = kzalloc(sizeof(*ttcce), GFP_KERNEL); - if (WARN_ON(!ttcce)) - return; - - err = of_property_read_u32(np, "reg", ®); - if (WARN_ON(err)) - return; - - ttcce->xttc.base_addr = base + reg * 4; - - ttcce->clk = of_clk_get_by_name(np, "cpu_1x"); - if (WARN_ON(IS_ERR(ttcce->clk))) - return; - - err = clk_prepare_enable(ttcce->clk); - if (WARN_ON(err)) - return; - - irq = irq_of_parse_and_map(np, 0); - if (WARN_ON(!irq)) - return; - - ttcce->ce.name = np->name; - ttcce->ce.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT; - ttcce->ce.set_next_event = xttcps_set_next_event; - ttcce->ce.set_mode = xttcps_set_mode; - ttcce->ce.rating = 200; - ttcce->ce.irq = irq; - ttcce->ce.cpumask = cpu_possible_mask; - - __raw_writel(0x23, ttcce->xttc.base_addr + XTTCPS_CNT_CNTRL_OFFSET); - __raw_writel(CLK_CNTRL_PRESCALE | CLK_CNTRL_PRESCALE_EN, - ttcce->xttc.base_addr + XTTCPS_CLK_CNTRL_OFFSET); - __raw_writel(0x1, ttcce->xttc.base_addr + XTTCPS_IER_OFFSET); - - err = request_irq(irq, xttcps_clock_event_interrupt, IRQF_TIMER, - np->name, ttcce); - if (WARN_ON(err)) - return; - - clockevents_config_and_register(&ttcce->ce, - clk_get_rate(ttcce->clk) / PRESCALE, - 1, 0xfffe); -} - -static const __initconst struct of_device_id zynq_ttc_match[] = { - { .compatible = "xlnx,ttc-counter-clocksource", - .data = zynq_ttc_setup_clocksource, }, - { .compatible = "xlnx,ttc-counter-clockevent", - .data = zynq_ttc_setup_clockevent, }, - {} -}; - -/** - * xttcps_timer_init - Initialize the timer - * - * Initializes the timer hardware and register the clock source and clock event - * timers with Linux kernal timer framework - **/ -void __init xttcps_timer_init(void) -{ - struct device_node *np; - - for_each_compatible_node(np, NULL, "xlnx,ttc") { - struct device_node *np_chld; - void __iomem *base; - - base = of_iomap(np, 0); - if (WARN_ON(!base)) - return; - - for_each_available_child_of_node(np, np_chld) { - int (*cb)(struct device_node *np, void __iomem *base); - const struct of_device_id *match; - - match = of_match_node(zynq_ttc_match, np_chld); - if (match) { - cb = match->data; - cb(np_chld, base); - } - } - } -} diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 025d17328730..35955b54944c 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -43,7 +43,7 @@ config CPU_ARM740T depends on !MMU select CPU_32v4T select CPU_ABRT_LV4T - select CPU_CACHE_V3 # although the core is v4t + select CPU_CACHE_V4 select CPU_CP15_MPU select CPU_PABRT_LEGACY help @@ -397,6 +397,13 @@ config CPU_V7 select CPU_PABRT_V7 select CPU_TLB_V7 if MMU +config CPU_THUMBONLY + bool + # There are no CPUs available with MMU that don't implement an ARM ISA: + depends on !MMU + help + Select this if your CPU doesn't support the 32 bit ARM instructions. + # Figure out what processor architecture version we should be using. # This defines the compiler instruction set which depends on the machine type. config CPU_32v3 @@ -469,9 +476,6 @@ config CPU_PABRT_V7 bool # The cache model -config CPU_CACHE_V3 - bool - config CPU_CACHE_V4 bool @@ -608,7 +612,7 @@ config ARCH_DMA_ADDR_T_64BIT bool config ARM_THUMB - bool "Support Thumb user binaries" + bool "Support Thumb user binaries" if !CPU_THUMBONLY depends on CPU_ARM720T || CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_V6 || CPU_V6K || CPU_V7 || CPU_FEROCEON default y help diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile index 4e333fa2756f..9e51be96f635 100644 --- a/arch/arm/mm/Makefile +++ b/arch/arm/mm/Makefile @@ -33,7 +33,6 @@ obj-$(CONFIG_CPU_PABRT_LEGACY) += pabort-legacy.o obj-$(CONFIG_CPU_PABRT_V6) += pabort-v6.o obj-$(CONFIG_CPU_PABRT_V7) += pabort-v7.o -obj-$(CONFIG_CPU_CACHE_V3) += cache-v3.o obj-$(CONFIG_CPU_CACHE_V4) += cache-v4.o obj-$(CONFIG_CPU_CACHE_V4WT) += cache-v4wt.o obj-$(CONFIG_CPU_CACHE_V4WB) += cache-v4wb.o diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index db26e2e543f4..6f4585b89078 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -961,12 +961,14 @@ static int __init alignment_init(void) return -ENOMEM; #endif +#ifdef CONFIG_CPU_CP15 if (cpu_is_v6_unaligned()) { cr_alignment &= ~CR_A; cr_no_alignment &= ~CR_A; set_cr(cr_alignment); ai_usermode = safe_usermode(ai_usermode, false); } +#endif hook_fault_code(FAULT_CODE_ALIGNMENT, do_alignment, SIGBUS, BUS_ADRALN, "alignment exception"); diff --git a/arch/arm/mm/cache-feroceon-l2.c b/arch/arm/mm/cache-feroceon-l2.c index dd3d59122cc3..48bc3c0a87ce 100644 --- a/arch/arm/mm/cache-feroceon-l2.c +++ b/arch/arm/mm/cache-feroceon-l2.c @@ -343,6 +343,7 @@ void __init feroceon_l2_init(int __l2_wt_override) outer_cache.inv_range = feroceon_l2_inv_range; outer_cache.clean_range = feroceon_l2_clean_range; outer_cache.flush_range = feroceon_l2_flush_range; + outer_cache.inv_all = l2_inv_all; enable_l2(); diff --git a/arch/arm/mm/cache-v3.S b/arch/arm/mm/cache-v3.S deleted file mode 100644 index 8a3fadece8d3..000000000000 --- a/arch/arm/mm/cache-v3.S +++ /dev/null @@ -1,137 +0,0 @@ -/* - * linux/arch/arm/mm/cache-v3.S - * - * Copyright (C) 1997-2002 Russell king - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/linkage.h> -#include <linux/init.h> -#include <asm/page.h> -#include "proc-macros.S" - -/* - * flush_icache_all() - * - * Unconditionally clean and invalidate the entire icache. - */ -ENTRY(v3_flush_icache_all) - mov pc, lr -ENDPROC(v3_flush_icache_all) - -/* - * flush_user_cache_all() - * - * Invalidate all cache entries in a particular address - * space. - * - * - mm - mm_struct describing address space - */ -ENTRY(v3_flush_user_cache_all) - /* FALLTHROUGH */ -/* - * flush_kern_cache_all() - * - * Clean and invalidate the entire cache. - */ -ENTRY(v3_flush_kern_cache_all) - /* FALLTHROUGH */ - -/* - * flush_user_cache_range(start, end, flags) - * - * Invalidate a range of cache entries in the specified - * address space. - * - * - start - start address (may not be aligned) - * - end - end address (exclusive, may not be aligned) - * - flags - vma_area_struct flags describing address space - */ -ENTRY(v3_flush_user_cache_range) - mov ip, #0 - mcreq p15, 0, ip, c7, c0, 0 @ flush ID cache - mov pc, lr - -/* - * coherent_kern_range(start, end) - * - * Ensure coherency between the Icache and the Dcache in the - * region described by start. If you have non-snooping - * Harvard caches, you need to implement this function. - * - * - start - virtual start address - * - end - virtual end address - */ -ENTRY(v3_coherent_kern_range) - /* FALLTHROUGH */ - -/* - * coherent_user_range(start, end) - * - * Ensure coherency between the Icache and the Dcache in the - * region described by start. If you have non-snooping - * Harvard caches, you need to implement this function. - * - * - start - virtual start address - * - end - virtual end address - */ -ENTRY(v3_coherent_user_range) - mov r0, #0 - mov pc, lr - -/* - * flush_kern_dcache_area(void *page, size_t size) - * - * Ensure no D cache aliasing occurs, either with itself or - * the I cache - * - * - addr - kernel address - * - size - region size - */ -ENTRY(v3_flush_kern_dcache_area) - /* FALLTHROUGH */ - -/* - * dma_flush_range(start, end) - * - * Clean and invalidate the specified virtual address range. - * - * - start - virtual start address - * - end - virtual end address - */ -ENTRY(v3_dma_flush_range) - mov r0, #0 - mcr p15, 0, r0, c7, c0, 0 @ flush ID cache - mov pc, lr - -/* - * dma_unmap_area(start, size, dir) - * - start - kernel virtual start address - * - size - size of region - * - dir - DMA direction - */ -ENTRY(v3_dma_unmap_area) - teq r2, #DMA_TO_DEVICE - bne v3_dma_flush_range - /* FALLTHROUGH */ - -/* - * dma_map_area(start, size, dir) - * - start - kernel virtual start address - * - size - size of region - * - dir - DMA direction - */ -ENTRY(v3_dma_map_area) - mov pc, lr -ENDPROC(v3_dma_unmap_area) -ENDPROC(v3_dma_map_area) - - .globl v3_flush_kern_cache_louis - .equ v3_flush_kern_cache_louis, v3_flush_kern_cache_all - - __INITDATA - - @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S) - define_cache_functions v3 diff --git a/arch/arm/mm/cache-v4.S b/arch/arm/mm/cache-v4.S index 43e5d77be677..a7ba68f59f0c 100644 --- a/arch/arm/mm/cache-v4.S +++ b/arch/arm/mm/cache-v4.S @@ -58,7 +58,7 @@ ENTRY(v4_flush_kern_cache_all) ENTRY(v4_flush_user_cache_range) #ifdef CONFIG_CPU_CP15 mov ip, #0 - mcreq p15, 0, ip, c7, c7, 0 @ flush ID cache + mcr p15, 0, ip, c7, c7, 0 @ flush ID cache mov pc, lr #else /* FALLTHROUGH */ diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index e9db6b4bf65a..ef3e0f3aac96 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -823,16 +823,17 @@ static void dma_cache_maint_page(struct page *page, unsigned long offset, if (PageHighMem(page)) { if (len + offset > PAGE_SIZE) len = PAGE_SIZE - offset; - vaddr = kmap_high_get(page); - if (vaddr) { - vaddr += offset; - op(vaddr, len, dir); - kunmap_high(page); - } else if (cache_is_vipt()) { - /* unmapped pages might still be cached */ + + if (cache_is_vipt_nonaliasing()) { vaddr = kmap_atomic(page); op(vaddr + offset, len, dir); kunmap_atomic(vaddr); + } else { + vaddr = kmap_high_get(page); + if (vaddr) { + op(vaddr + offset, len, dir); + kunmap_high(page); + } } } else { vaddr = page_address(page) + offset; diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c index 1c8f7f564175..0d473cce501c 100644 --- a/arch/arm/mm/flush.c +++ b/arch/arm/mm/flush.c @@ -170,15 +170,18 @@ void __flush_dcache_page(struct address_space *mapping, struct page *page) if (!PageHighMem(page)) { __cpuc_flush_dcache_area(page_address(page), PAGE_SIZE); } else { - void *addr = kmap_high_get(page); - if (addr) { - __cpuc_flush_dcache_area(addr, PAGE_SIZE); - kunmap_high(page); - } else if (cache_is_vipt()) { - /* unmapped pages might still be cached */ + void *addr; + + if (cache_is_vipt_nonaliasing()) { addr = kmap_atomic(page); __cpuc_flush_dcache_area(addr, PAGE_SIZE); kunmap_atomic(addr); + } else { + addr = kmap_high_get(page); + if (addr) { + __cpuc_flush_dcache_area(addr, PAGE_SIZE); + kunmap_high(page); + } } } diff --git a/arch/arm/mm/idmap.c b/arch/arm/mm/idmap.c index 5ee505c937d1..83cb3ac27095 100644 --- a/arch/arm/mm/idmap.c +++ b/arch/arm/mm/idmap.c @@ -8,7 +8,6 @@ #include <asm/pgtable.h> #include <asm/sections.h> #include <asm/system_info.h> -#include <asm/virt.h> pgd_t *idmap_pgd; @@ -83,37 +82,10 @@ static void identity_mapping_add(pgd_t *pgd, const char *text_start, } while (pgd++, addr = next, addr != end); } -#if defined(CONFIG_ARM_VIRT_EXT) && defined(CONFIG_ARM_LPAE) -pgd_t *hyp_pgd; - -extern char __hyp_idmap_text_start[], __hyp_idmap_text_end[]; - -static int __init init_static_idmap_hyp(void) -{ - hyp_pgd = kzalloc(PTRS_PER_PGD * sizeof(pgd_t), GFP_KERNEL); - if (!hyp_pgd) - return -ENOMEM; - - pr_info("Setting up static HYP identity map for 0x%p - 0x%p\n", - __hyp_idmap_text_start, __hyp_idmap_text_end); - identity_mapping_add(hyp_pgd, __hyp_idmap_text_start, - __hyp_idmap_text_end, PMD_SECT_AP1); - - return 0; -} -#else -static int __init init_static_idmap_hyp(void) -{ - return 0; -} -#endif - extern char __idmap_text_start[], __idmap_text_end[]; static int __init init_static_idmap(void) { - int ret; - idmap_pgd = pgd_alloc(&init_mm); if (!idmap_pgd) return -ENOMEM; @@ -123,12 +95,10 @@ static int __init init_static_idmap(void) identity_mapping_add(idmap_pgd, __idmap_text_start, __idmap_text_end, 0); - ret = init_static_idmap_hyp(); - /* Flush L1 for the hardware to see this page table content */ flush_cache_louis(); - return ret; + return 0; } early_initcall(init_static_idmap); diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index ad722f1208a5..9a5cdc01fcdf 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -99,6 +99,9 @@ void show_mem(unsigned int filter) printk("Mem-info:\n"); show_free_areas(filter); + if (filter & SHOW_MEM_FILTER_PAGE_COUNT) + return; + for_each_bank (i, mi) { struct membank *bank = &mi->bank[i]; unsigned int pfn1, pfn2; @@ -424,24 +427,6 @@ void __init bootmem_init(void) max_pfn = max_high - PHYS_PFN_OFFSET; } -static inline int free_area(unsigned long pfn, unsigned long end, char *s) -{ - unsigned int pages = 0, size = (end - pfn) << (PAGE_SHIFT - 10); - - for (; pfn < end; pfn++) { - struct page *page = pfn_to_page(pfn); - ClearPageReserved(page); - init_page_count(page); - __free_page(page); - pages++; - } - - if (size && s) - printk(KERN_INFO "Freeing %s memory: %dK\n", s, size); - - return pages; -} - /* * Poison init memory with an undefined instruction (ARM) or a branch to an * undefined instruction (Thumb). @@ -534,6 +519,14 @@ static void __init free_unused_memmap(struct meminfo *mi) #endif } +#ifdef CONFIG_HIGHMEM +static inline void free_area_high(unsigned long pfn, unsigned long end) +{ + for (; pfn < end; pfn++) + free_highmem_page(pfn_to_page(pfn)); +} +#endif + static void __init free_highpages(void) { #ifdef CONFIG_HIGHMEM @@ -569,8 +562,7 @@ static void __init free_highpages(void) if (res_end > end) res_end = end; if (res_start != start) - totalhigh_pages += free_area(start, res_start, - NULL); + free_area_high(start, res_start); start = res_end; if (start == end) break; @@ -578,9 +570,8 @@ static void __init free_highpages(void) /* And now free anything which remains */ if (start < end) - totalhigh_pages += free_area(start, end, NULL); + free_area_high(start, end); } - totalram_pages += totalhigh_pages; #endif } @@ -609,8 +600,7 @@ void __init mem_init(void) #ifdef CONFIG_SA1111 /* now that our DMA memory is actually so designated, we can free it */ - totalram_pages += free_area(PHYS_PFN_OFFSET, - __phys_to_pfn(__pa(swapper_pg_dir)), NULL); + free_reserved_area(__va(PHYS_PFN_OFFSET), swapper_pg_dir, 0, NULL); #endif free_highpages(); @@ -738,16 +728,12 @@ void free_initmem(void) extern char __tcm_start, __tcm_end; poison_init_mem(&__tcm_start, &__tcm_end - &__tcm_start); - totalram_pages += free_area(__phys_to_pfn(__pa(&__tcm_start)), - __phys_to_pfn(__pa(&__tcm_end)), - "TCM link"); + free_reserved_area(&__tcm_start, &__tcm_end, 0, "TCM link"); #endif poison_init_mem(__init_begin, __init_end - __init_begin); if (!machine_is_integrator() && !machine_is_cintegrator()) - totalram_pages += free_area(__phys_to_pfn(__pa(__init_begin)), - __phys_to_pfn(__pa(__init_end)), - "init"); + free_initmem_default(0); } #ifdef CONFIG_BLK_DEV_INITRD @@ -758,9 +744,7 @@ void free_initrd_mem(unsigned long start, unsigned long end) { if (!keep_initrd) { poison_init_mem((void *)start, PAGE_ALIGN(end) - start); - totalram_pages += free_area(__phys_to_pfn(__pa(start)), - __phys_to_pfn(__pa(end)), - "initrd"); + free_reserved_area(start, end, 0, "initrd"); } } diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 78978945492a..e0d8565671a6 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -34,6 +34,7 @@ #include <asm/mach/pci.h> #include "mm.h" +#include "tcm.h" /* * empty_zero_page is a special page that is used for @@ -112,6 +113,7 @@ static struct cachepolicy cache_policies[] __initdata = { } }; +#ifdef CONFIG_CPU_CP15 /* * These are useful for identifying cache coherency * problems by allowing the cache or the cache and @@ -210,6 +212,22 @@ void adjust_cr(unsigned long mask, unsigned long set) } #endif +#else /* ifdef CONFIG_CPU_CP15 */ + +static int __init early_cachepolicy(char *p) +{ + pr_warning("cachepolicy kernel parameter not supported without cp15\n"); +} +early_param("cachepolicy", early_cachepolicy); + +static int __init noalign_setup(char *__unused) +{ + pr_warning("noalign kernel parameter not supported without cp15\n"); +} +__setup("noalign", noalign_setup); + +#endif /* ifdef CONFIG_CPU_CP15 / else */ + #define PROT_PTE_DEVICE L_PTE_PRESENT|L_PTE_YOUNG|L_PTE_DIRTY|L_PTE_XN #define PROT_SECT_DEVICE PMD_TYPE_SECT|PMD_SECT_AP_WRITE @@ -1277,6 +1295,7 @@ void __init paging_init(struct machine_desc *mdesc) dma_contiguous_remap(); devicemaps_init(mdesc); kmap_init(); + tcm_init(); top_pmd = pmd_off_k(0xffff0000); diff --git a/arch/arm/mm/proc-arm740.S b/arch/arm/mm/proc-arm740.S index dc5de5d53f20..fde2d2a794cf 100644 --- a/arch/arm/mm/proc-arm740.S +++ b/arch/arm/mm/proc-arm740.S @@ -77,24 +77,27 @@ __arm740_setup: mcr p15, 0, r0, c6, c0 @ set area 0, default ldr r0, =(CONFIG_DRAM_BASE & 0xFFFFF000) @ base[31:12] of RAM - ldr r1, =(CONFIG_DRAM_SIZE >> 12) @ size of RAM (must be >= 4KB) - mov r2, #10 @ 11 is the minimum (4KB) -1: add r2, r2, #1 @ area size *= 2 - mov r1, r1, lsr #1 + ldr r3, =(CONFIG_DRAM_SIZE >> 12) @ size of RAM (must be >= 4KB) + mov r4, #10 @ 11 is the minimum (4KB) +1: add r4, r4, #1 @ area size *= 2 + movs r3, r3, lsr #1 bne 1b @ count not zero r-shift - orr r0, r0, r2, lsl #1 @ the area register value + orr r0, r0, r4, lsl #1 @ the area register value orr r0, r0, #1 @ set enable bit mcr p15, 0, r0, c6, c1 @ set area 1, RAM ldr r0, =(CONFIG_FLASH_MEM_BASE & 0xFFFFF000) @ base[31:12] of FLASH - ldr r1, =(CONFIG_FLASH_SIZE >> 12) @ size of FLASH (must be >= 4KB) - mov r2, #10 @ 11 is the minimum (4KB) -1: add r2, r2, #1 @ area size *= 2 - mov r1, r1, lsr #1 + ldr r3, =(CONFIG_FLASH_SIZE >> 12) @ size of FLASH (must be >= 4KB) + cmp r3, #0 + moveq r0, #0 + beq 2f + mov r4, #10 @ 11 is the minimum (4KB) +1: add r4, r4, #1 @ area size *= 2 + movs r3, r3, lsr #1 bne 1b @ count not zero r-shift - orr r0, r0, r2, lsl #1 @ the area register value + orr r0, r0, r4, lsl #1 @ the area register value orr r0, r0, #1 @ set enable bit - mcr p15, 0, r0, c6, c2 @ set area 2, ROM/FLASH +2: mcr p15, 0, r0, c6, c2 @ set area 2, ROM/FLASH mov r0, #0x06 mcr p15, 0, r0, c2, c0 @ Region 1&2 cacheable @@ -137,13 +140,14 @@ __arm740_proc_info: .long 0x41807400 .long 0xfffffff0 .long 0 + .long 0 b __arm740_setup .long cpu_arch_name .long cpu_elf_name - .long HWCAP_SWP | HWCAP_HALF | HWCAP_26BIT + .long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB | HWCAP_26BIT .long cpu_arm740_name .long arm740_processor_functions .long 0 .long 0 - .long v3_cache_fns @ cache model + .long v4_cache_fns @ cache model .size __arm740_proc_info, . - __arm740_proc_info diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S index 2c3b9421ab5e..2556cf1c2da1 100644 --- a/arch/arm/mm/proc-arm920.S +++ b/arch/arm/mm/proc-arm920.S @@ -387,7 +387,7 @@ ENTRY(cpu_arm920_set_pte_ext) /* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */ .globl cpu_arm920_suspend_size .equ cpu_arm920_suspend_size, 4 * 3 -#ifdef CONFIG_PM_SLEEP +#ifdef CONFIG_ARM_CPU_SUSPEND ENTRY(cpu_arm920_do_suspend) stmfd sp!, {r4 - r6, lr} mrc p15, 0, r4, c13, c0, 0 @ PID diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S index f1803f7e2972..344c8a548cc0 100644 --- a/arch/arm/mm/proc-arm926.S +++ b/arch/arm/mm/proc-arm926.S @@ -402,7 +402,7 @@ ENTRY(cpu_arm926_set_pte_ext) /* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */ .globl cpu_arm926_suspend_size .equ cpu_arm926_suspend_size, 4 * 3 -#ifdef CONFIG_PM_SLEEP +#ifdef CONFIG_ARM_CPU_SUSPEND ENTRY(cpu_arm926_do_suspend) stmfd sp!, {r4 - r6, lr} mrc p15, 0, r4, c13, c0, 0 @ PID diff --git a/arch/arm/mm/proc-mohawk.S b/arch/arm/mm/proc-mohawk.S index 82f9cdc751d6..0b60dd3d742a 100644 --- a/arch/arm/mm/proc-mohawk.S +++ b/arch/arm/mm/proc-mohawk.S @@ -350,7 +350,7 @@ ENTRY(cpu_mohawk_set_pte_ext) .globl cpu_mohawk_suspend_size .equ cpu_mohawk_suspend_size, 4 * 6 -#ifdef CONFIG_PM_SLEEP +#ifdef CONFIG_ARM_CPU_SUSPEND ENTRY(cpu_mohawk_do_suspend) stmfd sp!, {r4 - r9, lr} mrc p14, 0, r4, c6, c0, 0 @ clock configuration, for turbo mode diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S index 3aa0da11fd84..d92dfd081429 100644 --- a/arch/arm/mm/proc-sa1100.S +++ b/arch/arm/mm/proc-sa1100.S @@ -172,7 +172,7 @@ ENTRY(cpu_sa1100_set_pte_ext) .globl cpu_sa1100_suspend_size .equ cpu_sa1100_suspend_size, 4 * 3 -#ifdef CONFIG_PM_SLEEP +#ifdef CONFIG_ARM_CPU_SUSPEND ENTRY(cpu_sa1100_do_suspend) stmfd sp!, {r4 - r6, lr} mrc p15, 0, r4, c3, c0, 0 @ domain ID diff --git a/arch/arm/mm/proc-syms.c b/arch/arm/mm/proc-syms.c index 3e6210b4d6d4..054b491ff764 100644 --- a/arch/arm/mm/proc-syms.c +++ b/arch/arm/mm/proc-syms.c @@ -17,7 +17,9 @@ #ifndef MULTI_CPU EXPORT_SYMBOL(cpu_dcache_clean_area); +#ifdef CONFIG_MMU EXPORT_SYMBOL(cpu_set_pte_ext); +#endif #else EXPORT_SYMBOL(processor); #endif diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index bcaaa8de9325..919405e20b80 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -80,12 +80,10 @@ ENTRY(cpu_v6_do_idle) mov pc, lr ENTRY(cpu_v6_dcache_clean_area) -#ifndef TLB_CAN_READ_FROM_L1_CACHE 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry add r0, r0, #D_CACHE_LINE_SIZE subs r1, r1, #D_CACHE_LINE_SIZE bhi 1b -#endif mov pc, lr /* @@ -138,7 +136,7 @@ ENTRY(cpu_v6_set_pte_ext) /* Suspend/resume support: taken from arch/arm/mach-s3c64xx/sleep.S */ .globl cpu_v6_suspend_size .equ cpu_v6_suspend_size, 4 * 6 -#ifdef CONFIG_PM_SLEEP +#ifdef CONFIG_ARM_CPU_SUSPEND ENTRY(cpu_v6_do_suspend) stmfd sp!, {r4 - r9, lr} mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID diff --git a/arch/arm/mm/proc-v7-2level.S b/arch/arm/mm/proc-v7-2level.S index 78f520bc0e99..9704097c450e 100644 --- a/arch/arm/mm/proc-v7-2level.S +++ b/arch/arm/mm/proc-v7-2level.S @@ -110,7 +110,8 @@ ENTRY(cpu_v7_set_pte_ext) ARM( str r3, [r0, #2048]! ) THUMB( add r0, r0, #2048 ) THUMB( str r3, [r0] ) - mcr p15, 0, r0, c7, c10, 1 @ flush_pte + ALT_SMP(mov pc,lr) + ALT_UP (mcr p15, 0, r0, c7, c10, 1) @ flush_pte #endif mov pc, lr ENDPROC(cpu_v7_set_pte_ext) diff --git a/arch/arm/mm/proc-v7-3level.S b/arch/arm/mm/proc-v7-3level.S index 6ffd78c0f9ab..363027e811d6 100644 --- a/arch/arm/mm/proc-v7-3level.S +++ b/arch/arm/mm/proc-v7-3level.S @@ -73,7 +73,8 @@ ENTRY(cpu_v7_set_pte_ext) tst r3, #1 << (55 - 32) @ L_PTE_DIRTY orreq r2, #L_PTE_RDONLY 1: strd r2, r3, [r0] - mcr p15, 0, r0, c7, c10, 1 @ flush_pte + ALT_SMP(mov pc, lr) + ALT_UP (mcr p15, 0, r0, c7, c10, 1) @ flush_pte #endif mov pc, lr ENDPROC(cpu_v7_set_pte_ext) diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index f584d3f5b37c..2c73a7301ff7 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -75,14 +75,14 @@ ENTRY(cpu_v7_do_idle) ENDPROC(cpu_v7_do_idle) ENTRY(cpu_v7_dcache_clean_area) -#ifndef TLB_CAN_READ_FROM_L1_CACHE + ALT_SMP(mov pc, lr) @ MP extensions imply L1 PTW + ALT_UP(W(nop)) dcache_line_size r2, r3 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry add r0, r0, r2 subs r1, r1, r2 bhi 1b dsb -#endif mov pc, lr ENDPROC(cpu_v7_dcache_clean_area) @@ -402,6 +402,8 @@ __v7_ca9mp_proc_info: __v7_proc __v7_ca9mp_setup .size __v7_ca9mp_proc_info, . - __v7_ca9mp_proc_info +#endif /* CONFIG_ARM_LPAE */ + /* * Marvell PJ4B processor. */ @@ -411,7 +413,6 @@ __v7_pj4b_proc_info: .long 0xfffffff0 __v7_proc __v7_pj4b_setup .size __v7_pj4b_proc_info, . - __v7_pj4b_proc_info -#endif /* CONFIG_ARM_LPAE */ /* * ARM Ltd. Cortex A7 processor. diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S index eb93d6487f35..e8efd83b6f25 100644 --- a/arch/arm/mm/proc-xsc3.S +++ b/arch/arm/mm/proc-xsc3.S @@ -413,7 +413,7 @@ ENTRY(cpu_xsc3_set_pte_ext) .globl cpu_xsc3_suspend_size .equ cpu_xsc3_suspend_size, 4 * 6 -#ifdef CONFIG_PM_SLEEP +#ifdef CONFIG_ARM_CPU_SUSPEND ENTRY(cpu_xsc3_do_suspend) stmfd sp!, {r4 - r9, lr} mrc p14, 0, r4, c6, c0, 0 @ clock configuration, for turbo mode diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S index 25510361aa18..e766f889bfd6 100644 --- a/arch/arm/mm/proc-xscale.S +++ b/arch/arm/mm/proc-xscale.S @@ -528,7 +528,7 @@ ENTRY(cpu_xscale_set_pte_ext) .globl cpu_xscale_suspend_size .equ cpu_xscale_suspend_size, 4 * 6 -#ifdef CONFIG_PM_SLEEP +#ifdef CONFIG_ARM_CPU_SUSPEND ENTRY(cpu_xscale_do_suspend) stmfd sp!, {r4 - r9, lr} mrc p14, 0, r4, c6, c0, 0 @ clock configuration, for turbo mode diff --git a/arch/arm/kernel/tcm.h b/arch/arm/mm/tcm.h index 8015ad434a40..8015ad434a40 100644 --- a/arch/arm/kernel/tcm.h +++ b/arch/arm/mm/tcm.h diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c index a0bd8a755bdf..1a643ee8e082 100644 --- a/arch/arm/net/bpf_jit_32.c +++ b/arch/arm/net/bpf_jit_32.c @@ -918,9 +918,8 @@ void bpf_jit_compile(struct sk_filter *fp) #endif if (bpf_jit_enable > 1) - print_hex_dump(KERN_INFO, "BPF JIT code: ", - DUMP_PREFIX_ADDRESS, 16, 4, ctx.target, - alloc_size, false); + /* there are 2 passes here */ + bpf_jit_dump(fp->len, alloc_size, 2, ctx.target); fp->bpf_func = (void *)ctx.target; out: diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index a0daa2fb5de6..869254cebf84 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -52,6 +52,13 @@ static u32 omap_reserved_systimers; static LIST_HEAD(omap_timer_list); static DEFINE_SPINLOCK(dm_timer_lock); +enum { + REQUEST_ANY = 0, + REQUEST_BY_ID, + REQUEST_BY_CAP, + REQUEST_BY_NODE, +}; + /** * omap_dm_timer_read_reg - read timer registers in posted and non-posted mode * @timer: timer pointer over which read operation to perform @@ -140,8 +147,7 @@ static int omap_dm_timer_prepare(struct omap_dm_timer *timer) */ if (!(timer->capability & OMAP_TIMER_NEEDS_RESET)) { timer->fclk = clk_get(&timer->pdev->dev, "fck"); - if (WARN_ON_ONCE(IS_ERR_OR_NULL(timer->fclk))) { - timer->fclk = NULL; + if (WARN_ON_ONCE(IS_ERR(timer->fclk))) { dev_err(&timer->pdev->dev, ": No fclk handle.\n"); return -EINVAL; } @@ -178,29 +184,82 @@ int omap_dm_timer_reserve_systimer(int id) return 0; } -struct omap_dm_timer *omap_dm_timer_request(void) +static struct omap_dm_timer *_omap_dm_timer_request(int req_type, void *data) { struct omap_dm_timer *timer = NULL, *t; + struct device_node *np = NULL; unsigned long flags; - int ret = 0; + u32 cap = 0; + int id = 0; + + switch (req_type) { + case REQUEST_BY_ID: + id = *(int *)data; + break; + case REQUEST_BY_CAP: + cap = *(u32 *)data; + break; + case REQUEST_BY_NODE: + np = (struct device_node *)data; + break; + default: + /* REQUEST_ANY */ + break; + } spin_lock_irqsave(&dm_timer_lock, flags); list_for_each_entry(t, &omap_timer_list, node) { if (t->reserved) continue; - timer = t; - timer->reserved = 1; - break; + switch (req_type) { + case REQUEST_BY_ID: + if (id == t->pdev->id) { + timer = t; + timer->reserved = 1; + goto found; + } + break; + case REQUEST_BY_CAP: + if (cap == (t->capability & cap)) { + /* + * If timer is not NULL, we have already found + * one timer but it was not an exact match + * because it had more capabilites that what + * was required. Therefore, unreserve the last + * timer found and see if this one is a better + * match. + */ + if (timer) + timer->reserved = 0; + timer = t; + timer->reserved = 1; + + /* Exit loop early if we find an exact match */ + if (t->capability == cap) + goto found; + } + break; + case REQUEST_BY_NODE: + if (np == t->pdev->dev.of_node) { + timer = t; + timer->reserved = 1; + goto found; + } + break; + default: + /* REQUEST_ANY */ + timer = t; + timer->reserved = 1; + goto found; + } } +found: spin_unlock_irqrestore(&dm_timer_lock, flags); - if (timer) { - ret = omap_dm_timer_prepare(timer); - if (ret) { - timer->reserved = 0; - timer = NULL; - } + if (timer && omap_dm_timer_prepare(timer)) { + timer->reserved = 0; + timer = NULL; } if (!timer) @@ -208,43 +267,23 @@ struct omap_dm_timer *omap_dm_timer_request(void) return timer; } + +struct omap_dm_timer *omap_dm_timer_request(void) +{ + return _omap_dm_timer_request(REQUEST_ANY, NULL); +} EXPORT_SYMBOL_GPL(omap_dm_timer_request); struct omap_dm_timer *omap_dm_timer_request_specific(int id) { - struct omap_dm_timer *timer = NULL, *t; - unsigned long flags; - int ret = 0; - /* Requesting timer by ID is not supported when device tree is used */ if (of_have_populated_dt()) { - pr_warn("%s: Please use omap_dm_timer_request_by_cap()\n", + pr_warn("%s: Please use omap_dm_timer_request_by_cap/node()\n", __func__); return NULL; } - spin_lock_irqsave(&dm_timer_lock, flags); - list_for_each_entry(t, &omap_timer_list, node) { - if (t->pdev->id == id && !t->reserved) { - timer = t; - timer->reserved = 1; - break; - } - } - spin_unlock_irqrestore(&dm_timer_lock, flags); - - if (timer) { - ret = omap_dm_timer_prepare(timer); - if (ret) { - timer->reserved = 0; - timer = NULL; - } - } - - if (!timer) - pr_debug("%s: timer%d request failed!\n", __func__, id); - - return timer; + return _omap_dm_timer_request(REQUEST_BY_ID, &id); } EXPORT_SYMBOL_GPL(omap_dm_timer_request_specific); @@ -259,46 +298,25 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_request_specific); */ struct omap_dm_timer *omap_dm_timer_request_by_cap(u32 cap) { - struct omap_dm_timer *timer = NULL, *t; - unsigned long flags; + return _omap_dm_timer_request(REQUEST_BY_CAP, &cap); +} +EXPORT_SYMBOL_GPL(omap_dm_timer_request_by_cap); - if (!cap) +/** + * omap_dm_timer_request_by_node - Request a timer by device-tree node + * @np: Pointer to device-tree timer node + * + * Request a timer based upon a device node pointer. Returns pointer to + * timer handle on success and a NULL pointer on failure. + */ +struct omap_dm_timer *omap_dm_timer_request_by_node(struct device_node *np) +{ + if (!np) return NULL; - spin_lock_irqsave(&dm_timer_lock, flags); - list_for_each_entry(t, &omap_timer_list, node) { - if ((!t->reserved) && ((t->capability & cap) == cap)) { - /* - * If timer is not NULL, we have already found one timer - * but it was not an exact match because it had more - * capabilites that what was required. Therefore, - * unreserve the last timer found and see if this one - * is a better match. - */ - if (timer) - timer->reserved = 0; - - timer = t; - timer->reserved = 1; - - /* Exit loop early if we find an exact match */ - if (t->capability == cap) - break; - } - } - spin_unlock_irqrestore(&dm_timer_lock, flags); - - if (timer && omap_dm_timer_prepare(timer)) { - timer->reserved = 0; - timer = NULL; - } - - if (!timer) - pr_debug("%s: timer request failed!\n", __func__); - - return timer; + return _omap_dm_timer_request(REQUEST_BY_NODE, np); } -EXPORT_SYMBOL_GPL(omap_dm_timer_request_by_cap); +EXPORT_SYMBOL_GPL(omap_dm_timer_request_by_node); int omap_dm_timer_free(struct omap_dm_timer *timer) { @@ -315,7 +333,21 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_free); void omap_dm_timer_enable(struct omap_dm_timer *timer) { + int c; + pm_runtime_get_sync(&timer->pdev->dev); + + if (!(timer->capability & OMAP_TIMER_ALWON)) { + if (timer->get_context_loss_count) { + c = timer->get_context_loss_count(&timer->pdev->dev); + if (c != timer->ctx_loss_count) { + omap_timer_restore_context(timer); + timer->ctx_loss_count = c; + } + } else { + omap_timer_restore_context(timer); + } + } } EXPORT_SYMBOL_GPL(omap_dm_timer_enable); @@ -373,7 +405,7 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_modify_idlect_mask); struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer) { - if (timer) + if (timer && !IS_ERR(timer->fclk)) return timer->fclk; return NULL; } @@ -410,13 +442,6 @@ int omap_dm_timer_start(struct omap_dm_timer *timer) omap_dm_timer_enable(timer); - if (!(timer->capability & OMAP_TIMER_ALWON)) { - if (timer->get_context_loss_count && - timer->get_context_loss_count(&timer->pdev->dev) != - timer->ctx_loss_count) - omap_timer_restore_context(timer); - } - l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG); if (!(l & OMAP_TIMER_CTRL_ST)) { l |= OMAP_TIMER_CTRL_ST; @@ -441,12 +466,6 @@ int omap_dm_timer_stop(struct omap_dm_timer *timer) __omap_dm_timer_stop(timer, timer->posted, rate); - if (!(timer->capability & OMAP_TIMER_ALWON)) { - if (timer->get_context_loss_count) - timer->ctx_loss_count = - timer->get_context_loss_count(&timer->pdev->dev); - } - /* * Since the register values are computed and written within * __omap_dm_timer_stop, we need to use read to retrieve the @@ -482,7 +501,7 @@ int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) if (pdata && pdata->set_timer_src) return pdata->set_timer_src(timer->pdev, source); - if (!timer->fclk) + if (IS_ERR(timer->fclk)) return -EINVAL; switch (source) { @@ -500,13 +519,13 @@ int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) } parent = clk_get(&timer->pdev->dev, parent_name); - if (IS_ERR_OR_NULL(parent)) { + if (IS_ERR(parent)) { pr_err("%s: %s not found\n", __func__, parent_name); return -EINVAL; } ret = clk_set_parent(timer->fclk, parent); - if (IS_ERR_VALUE(ret)) + if (ret < 0) pr_err("%s: failed to set %s as parent\n", __func__, parent_name); @@ -553,13 +572,6 @@ int omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, omap_dm_timer_enable(timer); - if (!(timer->capability & OMAP_TIMER_ALWON)) { - if (timer->get_context_loss_count && - timer->get_context_loss_count(&timer->pdev->dev) != - timer->ctx_loss_count) - omap_timer_restore_context(timer); - } - l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG); if (autoreload) { l |= OMAP_TIMER_CTRL_AR; @@ -770,6 +782,8 @@ int omap_dm_timers_active(void) } EXPORT_SYMBOL_GPL(omap_dm_timers_active); +static const struct of_device_id omap_timer_match[]; + /** * omap_dm_timer_probe - probe function called for every registered device * @pdev: pointer to current timer platform device @@ -783,7 +797,11 @@ static int omap_dm_timer_probe(struct platform_device *pdev) struct omap_dm_timer *timer; struct resource *mem, *irq; struct device *dev = &pdev->dev; - struct dmtimer_platform_data *pdata = pdev->dev.platform_data; + const struct of_device_id *match; + const struct dmtimer_platform_data *pdata; + + match = of_match_device(of_match_ptr(omap_timer_match), dev); + pdata = match ? match->data : dev->platform_data; if (!pdata && !dev->of_node) { dev_err(dev, "%s: no platform data.\n", __func__); @@ -808,6 +826,7 @@ static int omap_dm_timer_probe(struct platform_device *pdev) return -ENOMEM; } + timer->fclk = ERR_PTR(-ENODEV); timer->io_base = devm_ioremap_resource(dev, mem); if (IS_ERR(timer->io_base)) return PTR_ERR(timer->io_base); @@ -823,12 +842,14 @@ static int omap_dm_timer_probe(struct platform_device *pdev) timer->capability |= OMAP_TIMER_SECURE; } else { timer->id = pdev->id; - timer->errata = pdata->timer_errata; timer->capability = pdata->timer_capability; timer->reserved = omap_dm_timer_reserved_systimer(timer->id); timer->get_context_loss_count = pdata->get_context_loss_count; } + if (pdata) + timer->errata = pdata->timer_errata; + timer->irq = irq->start; timer->pdev = pdev; @@ -881,8 +902,34 @@ static int omap_dm_timer_remove(struct platform_device *pdev) return ret; } +static const struct dmtimer_platform_data omap3plus_pdata = { + .timer_errata = OMAP_TIMER_ERRATA_I103_I767, +}; + static const struct of_device_id omap_timer_match[] = { - { .compatible = "ti,omap2-timer", }, + { + .compatible = "ti,omap2420-timer", + }, + { + .compatible = "ti,omap3430-timer", + .data = &omap3plus_pdata, + }, + { + .compatible = "ti,omap4430-timer", + .data = &omap3plus_pdata, + }, + { + .compatible = "ti,omap5430-timer", + .data = &omap3plus_pdata, + }, + { + .compatible = "ti,am335x-timer", + .data = &omap3plus_pdata, + }, + { + .compatible = "ti,am335x-timer-1ms", + .data = &omap3plus_pdata, + }, {}, }; MODULE_DEVICE_TABLE(of, omap_timer_match); diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h index a3fbc48c332e..fb92abb91628 100644 --- a/arch/arm/plat-omap/include/plat/dmtimer.h +++ b/arch/arm/plat-omap/include/plat/dmtimer.h @@ -128,6 +128,7 @@ int omap_dm_timer_reserve_systimer(int id); struct omap_dm_timer *omap_dm_timer_request(void); struct omap_dm_timer *omap_dm_timer_request_specific(int timer_id); struct omap_dm_timer *omap_dm_timer_request_by_cap(u32 cap); +struct omap_dm_timer *omap_dm_timer_request_by_node(struct device_node *np); int omap_dm_timer_free(struct omap_dm_timer *timer); void omap_dm_timer_enable(struct omap_dm_timer *timer); void omap_dm_timer_disable(struct omap_dm_timer *timer); diff --git a/arch/arm/plat-orion/Makefile b/arch/arm/plat-orion/Makefile index a82cecb84948..2eca54b65906 100644 --- a/arch/arm/plat-orion/Makefile +++ b/arch/arm/plat-orion/Makefile @@ -3,8 +3,6 @@ # ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include -obj-y += addr-map.o - orion-gpio-$(CONFIG_GENERIC_GPIO) += gpio.o obj-$(CONFIG_PLAT_ORION_LEGACY) += irq.o pcie.o time.o common.o mpp.o obj-$(CONFIG_PLAT_ORION_LEGACY) += $(orion-gpio-y) diff --git a/arch/arm/plat-orion/addr-map.c b/arch/arm/plat-orion/addr-map.c deleted file mode 100644 index 807ac8e5cbc0..000000000000 --- a/arch/arm/plat-orion/addr-map.c +++ /dev/null @@ -1,178 +0,0 @@ -/* - * arch/arm/plat-orion/addr-map.c - * - * Address map functions for Marvell Orion based SoCs - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/mbus.h> -#include <linux/io.h> -#include <plat/addr-map.h> - -struct mbus_dram_target_info orion_mbus_dram_info; - -const struct mbus_dram_target_info *mv_mbus_dram_info(void) -{ - return &orion_mbus_dram_info; -} -EXPORT_SYMBOL_GPL(mv_mbus_dram_info); - -/* - * DDR target is the same on all Orion platforms. - */ -#define TARGET_DDR 0 - -/* - * Helpers to get DDR bank info - */ -#define DDR_BASE_CS_OFF(n) (0x0000 + ((n) << 3)) -#define DDR_SIZE_CS_OFF(n) (0x0004 + ((n) << 3)) - -/* - * CPU Address Decode Windows registers - */ -#define WIN_CTRL_OFF 0x0000 -#define WIN_BASE_OFF 0x0004 -#define WIN_REMAP_LO_OFF 0x0008 -#define WIN_REMAP_HI_OFF 0x000c - -#define ATTR_HW_COHERENCY (0x1 << 4) - -/* - * Default implementation - */ -static void __init __iomem * -orion_win_cfg_base(const struct orion_addr_map_cfg *cfg, int win) -{ - return cfg->bridge_virt_base + (win << 4); -} - -/* - * Default implementation - */ -static int __init orion_cpu_win_can_remap(const struct orion_addr_map_cfg *cfg, - const int win) -{ - if (win < cfg->remappable_wins) - return 1; - - return 0; -} - -void __init orion_setup_cpu_win(const struct orion_addr_map_cfg *cfg, - const int win, const u32 base, - const u32 size, const u8 target, - const u8 attr, const int remap) -{ - void __iomem *addr = cfg->win_cfg_base(cfg, win); - u32 ctrl, base_high, remap_addr; - - if (win >= cfg->num_wins) { - printk(KERN_ERR "setup_cpu_win: trying to allocate window " - "%d when only %d allowed\n", win, cfg->num_wins); - } - - base_high = base & 0xffff0000; - ctrl = ((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1; - - writel(base_high, addr + WIN_BASE_OFF); - writel(ctrl, addr + WIN_CTRL_OFF); - if (cfg->cpu_win_can_remap(cfg, win)) { - if (remap < 0) - remap_addr = base; - else - remap_addr = remap; - writel(remap_addr & 0xffff0000, addr + WIN_REMAP_LO_OFF); - writel(0, addr + WIN_REMAP_HI_OFF); - } -} - -/* - * Configure a number of windows. - */ -static void __init orion_setup_cpu_wins(const struct orion_addr_map_cfg * cfg, - const struct orion_addr_map_info *info) -{ - while (info->win != -1) { - orion_setup_cpu_win(cfg, info->win, info->base, info->size, - info->target, info->attr, info->remap); - info++; - } -} - -static void __init orion_disable_wins(const struct orion_addr_map_cfg * cfg) -{ - void __iomem *addr; - int i; - - for (i = 0; i < cfg->num_wins; i++) { - addr = cfg->win_cfg_base(cfg, i); - - writel(0, addr + WIN_BASE_OFF); - writel(0, addr + WIN_CTRL_OFF); - if (cfg->cpu_win_can_remap(cfg, i)) { - writel(0, addr + WIN_REMAP_LO_OFF); - writel(0, addr + WIN_REMAP_HI_OFF); - } - } -} - -/* - * Disable, clear and configure windows. - */ -void __init orion_config_wins(struct orion_addr_map_cfg * cfg, - const struct orion_addr_map_info *info) -{ - if (!cfg->cpu_win_can_remap) - cfg->cpu_win_can_remap = orion_cpu_win_can_remap; - - if (!cfg->win_cfg_base) - cfg->win_cfg_base = orion_win_cfg_base; - - orion_disable_wins(cfg); - - if (info) - orion_setup_cpu_wins(cfg, info); -} - -/* - * Setup MBUS dram target info. - */ -void __init orion_setup_cpu_mbus_target(const struct orion_addr_map_cfg *cfg, - const void __iomem *ddr_window_cpu_base) -{ - int i; - int cs; - - orion_mbus_dram_info.mbus_dram_target_id = TARGET_DDR; - - for (i = 0, cs = 0; i < 4; i++) { - u32 base = readl(ddr_window_cpu_base + DDR_BASE_CS_OFF(i)); - u32 size = readl(ddr_window_cpu_base + DDR_SIZE_CS_OFF(i)); - - /* - * We only take care of entries for which the chip - * select is enabled, and that don't have high base - * address bits set (devices can only access the first - * 32 bits of the memory). - */ - if ((size & 1) && !(base & 0xF)) { - struct mbus_dram_window *w; - - w = &orion_mbus_dram_info.cs[cs++]; - w->cs_index = i; - w->mbus_attr = 0xf & ~(1 << i); - if (cfg->hw_io_coherency) - w->mbus_attr |= ATTR_HW_COHERENCY; - w->base = base & 0xffff0000; - w->size = (size | 0x0000ffff) + 1; - } - } - orion_mbus_dram_info.num_cs = cs; -} diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c index 2d4b6414609f..251f827271e9 100644 --- a/arch/arm/plat-orion/common.c +++ b/arch/arm/plat-orion/common.c @@ -238,6 +238,7 @@ static __init void ge_complete( struct mv643xx_eth_shared_platform_data *orion_ge_shared_data, struct resource *orion_ge_resource, unsigned long irq, struct platform_device *orion_ge_shared, + struct platform_device *orion_ge_mvmdio, struct mv643xx_eth_platform_data *eth_data, struct platform_device *orion_ge) { @@ -247,6 +248,8 @@ static __init void ge_complete( orion_ge->dev.platform_data = eth_data; platform_device_register(orion_ge_shared); + if (orion_ge_mvmdio) + platform_device_register(orion_ge_mvmdio); platform_device_register(orion_ge); } @@ -258,8 +261,6 @@ struct mv643xx_eth_shared_platform_data orion_ge00_shared_data; static struct resource orion_ge00_shared_resources[] = { { .name = "ge00 base", - }, { - .name = "ge00 err irq", }, }; @@ -271,6 +272,19 @@ static struct platform_device orion_ge00_shared = { }, }; +static struct resource orion_ge_mvmdio_resources[] = { + { + .name = "ge00 mvmdio base", + }, { + .name = "ge00 mvmdio err irq", + }, +}; + +static struct platform_device orion_ge_mvmdio = { + .name = "orion-mdio", + .id = -1, +}; + static struct resource orion_ge00_resources[] = { { .name = "ge00 irq", @@ -295,26 +309,25 @@ void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data, unsigned int tx_csum_limit) { fill_resources(&orion_ge00_shared, orion_ge00_shared_resources, - mapbase + 0x2000, SZ_16K - 1, irq_err); + mapbase + 0x2000, SZ_16K - 1, NO_IRQ); + fill_resources(&orion_ge_mvmdio, orion_ge_mvmdio_resources, + mapbase + 0x2004, 0x84 - 1, irq_err); orion_ge00_shared_data.tx_csum_limit = tx_csum_limit; ge_complete(&orion_ge00_shared_data, orion_ge00_resources, irq, &orion_ge00_shared, + &orion_ge_mvmdio, eth_data, &orion_ge00); } /***************************************************************************** * GE01 ****************************************************************************/ -struct mv643xx_eth_shared_platform_data orion_ge01_shared_data = { - .shared_smi = &orion_ge00_shared, -}; +struct mv643xx_eth_shared_platform_data orion_ge01_shared_data; static struct resource orion_ge01_shared_resources[] = { { .name = "ge01 base", - }, { - .name = "ge01 err irq", - }, + } }; static struct platform_device orion_ge01_shared = { @@ -349,26 +362,23 @@ void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data, unsigned int tx_csum_limit) { fill_resources(&orion_ge01_shared, orion_ge01_shared_resources, - mapbase + 0x2000, SZ_16K - 1, irq_err); + mapbase + 0x2000, SZ_16K - 1, NO_IRQ); orion_ge01_shared_data.tx_csum_limit = tx_csum_limit; ge_complete(&orion_ge01_shared_data, orion_ge01_resources, irq, &orion_ge01_shared, + NULL, eth_data, &orion_ge01); } /***************************************************************************** * GE10 ****************************************************************************/ -struct mv643xx_eth_shared_platform_data orion_ge10_shared_data = { - .shared_smi = &orion_ge00_shared, -}; +struct mv643xx_eth_shared_platform_data orion_ge10_shared_data; static struct resource orion_ge10_shared_resources[] = { { .name = "ge10 base", - }, { - .name = "ge10 err irq", - }, + } }; static struct platform_device orion_ge10_shared = { @@ -402,24 +412,21 @@ void __init orion_ge10_init(struct mv643xx_eth_platform_data *eth_data, unsigned long irq_err) { fill_resources(&orion_ge10_shared, orion_ge10_shared_resources, - mapbase + 0x2000, SZ_16K - 1, irq_err); + mapbase + 0x2000, SZ_16K - 1, NO_IRQ); ge_complete(&orion_ge10_shared_data, orion_ge10_resources, irq, &orion_ge10_shared, + NULL, eth_data, &orion_ge10); } /***************************************************************************** * GE11 ****************************************************************************/ -struct mv643xx_eth_shared_platform_data orion_ge11_shared_data = { - .shared_smi = &orion_ge00_shared, -}; +struct mv643xx_eth_shared_platform_data orion_ge11_shared_data; static struct resource orion_ge11_shared_resources[] = { { .name = "ge11 base", - }, { - .name = "ge11 err irq", }, }; @@ -454,9 +461,10 @@ void __init orion_ge11_init(struct mv643xx_eth_platform_data *eth_data, unsigned long irq_err) { fill_resources(&orion_ge11_shared, orion_ge11_shared_resources, - mapbase + 0x2000, SZ_16K - 1, irq_err); + mapbase + 0x2000, SZ_16K - 1, NO_IRQ); ge_complete(&orion_ge11_shared_data, orion_ge11_resources, irq, &orion_ge11_shared, + NULL, eth_data, &orion_ge11); } diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c index c29ee7ea200b..e39c2ba6e2fb 100644 --- a/arch/arm/plat-orion/gpio.c +++ b/arch/arm/plat-orion/gpio.c @@ -439,6 +439,64 @@ static void gpio_irq_handler(unsigned irq, struct irq_desc *desc) } } +#ifdef CONFIG_DEBUG_FS +#include <linux/seq_file.h> + +static void orion_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip) +{ + struct orion_gpio_chip *ochip = + container_of(chip, struct orion_gpio_chip, chip); + u32 out, io_conf, blink, in_pol, data_in, cause, edg_msk, lvl_msk; + int i; + + out = readl_relaxed(GPIO_OUT(ochip)); + io_conf = readl_relaxed(GPIO_IO_CONF(ochip)); + blink = readl_relaxed(GPIO_BLINK_EN(ochip)); + in_pol = readl_relaxed(GPIO_IN_POL(ochip)); + data_in = readl_relaxed(GPIO_DATA_IN(ochip)); + cause = readl_relaxed(GPIO_EDGE_CAUSE(ochip)); + edg_msk = readl_relaxed(GPIO_EDGE_MASK(ochip)); + lvl_msk = readl_relaxed(GPIO_LEVEL_MASK(ochip)); + + for (i = 0; i < chip->ngpio; i++) { + const char *label; + u32 msk; + bool is_out; + + label = gpiochip_is_requested(chip, i); + if (!label) + continue; + + msk = 1 << i; + is_out = !(io_conf & msk); + + seq_printf(s, " gpio-%-3d (%-20.20s)", chip->base + i, label); + + if (is_out) { + seq_printf(s, " out %s %s\n", + out & msk ? "hi" : "lo", + blink & msk ? "(blink )" : ""); + continue; + } + + seq_printf(s, " in %s (act %s) - IRQ", + (data_in ^ in_pol) & msk ? "hi" : "lo", + in_pol & msk ? "lo" : "hi"); + if (!((edg_msk | lvl_msk) & msk)) { + seq_printf(s, " disabled\n"); + continue; + } + if (edg_msk & msk) + seq_printf(s, " edge "); + if (lvl_msk & msk) + seq_printf(s, " level"); + seq_printf(s, " (%s)\n", cause & msk ? "pending" : "clear "); + } +} +#else +#define orion_gpio_dbg_show NULL +#endif + void __init orion_gpio_init(struct device_node *np, int gpio_base, int ngpio, void __iomem *base, int mask_offset, @@ -471,6 +529,7 @@ void __init orion_gpio_init(struct device_node *np, #ifdef CONFIG_OF ochip->chip.of_node = np; #endif + ochip->chip.dbg_show = orion_gpio_dbg_show; spin_lock_init(&ochip->lock); ochip->base = (void __iomem *)base; diff --git a/arch/arm/plat-orion/pcie.c b/arch/arm/plat-orion/pcie.c index f20a321088a2..8b8c06d2e9c4 100644 --- a/arch/arm/plat-orion/pcie.c +++ b/arch/arm/plat-orion/pcie.c @@ -120,12 +120,14 @@ void __init orion_pcie_reset(void __iomem *base) * BAR[0,2] -> disabled, BAR[1] -> covers all DRAM banks * WIN[0-3] -> DRAM bank[0-3] */ -static void __init orion_pcie_setup_wins(void __iomem *base, - struct mbus_dram_target_info *dram) +static void __init orion_pcie_setup_wins(void __iomem *base) { + const struct mbus_dram_target_info *dram; u32 size; int i; + dram = mv_mbus_dram_info(); + /* * First, disable and clear BARs and windows. */ @@ -150,7 +152,7 @@ static void __init orion_pcie_setup_wins(void __iomem *base, */ size = 0; for (i = 0; i < dram->num_cs; i++) { - struct mbus_dram_window *cs = dram->cs + i; + const struct mbus_dram_window *cs = dram->cs + i; writel(cs->base & 0xffff0000, base + PCIE_WIN04_BASE_OFF(i)); writel(0, base + PCIE_WIN04_REMAP_OFF(i)); @@ -184,7 +186,7 @@ void __init orion_pcie_setup(void __iomem *base) /* * Point PCIe unit MBUS decode windows to DRAM space. */ - orion_pcie_setup_wins(base, &orion_mbus_dram_info); + orion_pcie_setup_wins(base); /* * Master + slave enable. diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index a9d52167e16e..f8ed2de0a678 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -25,7 +25,7 @@ config PLAT_S5P select PLAT_SAMSUNG select S3C_GPIO_TRACK select S5P_GPIO_DRVSTR - select SAMSUNG_CLKSRC + select SAMSUNG_CLKSRC if !COMMON_CLK select SAMSUNG_GPIOLIB_4BIT select SAMSUNG_IRQ_VIC_TIMER help @@ -37,14 +37,6 @@ if PLAT_SAMSUNG comment "Boot options" -config S3C_BOOT_WATCHDOG - bool "S3C Initialisation watchdog" - depends on S3C2410_WATCHDOG - help - Say y to enable the watchdog during the kernel decompression - stage. If the kernel fails to uncompress, then the watchdog - will trigger a reset and the system should restart. - config S3C_BOOT_ERROR_RESET bool "S3C Reboot on decompression error" help @@ -70,7 +62,7 @@ config S3C_LOWLEVEL_UART_PORT # timer options -config S5P_HRT +config SAMSUNG_HRT bool select SAMSUNG_DEV_PWM help @@ -89,7 +81,7 @@ config SAMSUNG_CLKSRC used by newer systems such as the S3C64XX. config S5P_CLOCK - def_bool (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS) + def_bool (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210) help Support common clock part for ARCH_S5P and ARCH_EXYNOS SoCs @@ -101,9 +93,9 @@ config SAMSUNG_IRQ_VIC_TIMER Internal configuration to build the VIC timer interrupt code. config S5P_IRQ - def_bool (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS) + def_bool (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210) help - Support common interrup part for ARCH_S5P and ARCH_EXYNOS SoCs + Support common interrupt part for ARCH_S5P SoCs config S5P_EXT_INT bool @@ -125,12 +117,6 @@ config SAMSUNG_GPIOLIB_4BIT configuration. GPIOlib shall be compiled only for S3C64XX and S5P series of processors. -config S3C_GPIO_CFG_S3C64XX - bool - help - Internal configuration to enable S3C64XX style GPIO configuration - functions. - config S5P_GPIO_DRVSTR bool help diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile index 3a7c64d1814a..a23c460299a1 100644 --- a/arch/arm/plat-samsung/Makefile +++ b/arch/arm/plat-samsung/Makefile @@ -12,8 +12,7 @@ obj- := # Objects we always build independent of SoC choice obj-y += init.o cpu.o -obj-$(CONFIG_ARCH_USES_GETTIMEOFFSET) += time.o -obj-$(CONFIG_S5P_HRT) += s5p-time.o +obj-$(CONFIG_SAMSUNG_HRT) += samsung-time.o obj-$(CONFIG_SAMSUNG_CLOCK) += clock.o obj-$(CONFIG_SAMSUNG_CLOCK) += pwm-clock.o diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 51afedda9ab6..30c2fe243f76 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -10,6 +10,7 @@ * published by the Free Software Foundation. */ +#include <linux/amba/pl330.h> #include <linux/kernel.h> #include <linux/types.h> #include <linux/interrupt.h> @@ -62,7 +63,6 @@ #include <linux/platform_data/usb-s3c2410_udc.h> #include <linux/platform_data/usb-ohci-s3c2410.h> #include <plat/usb-phy.h> -#include <plat/regs-iic.h> #include <plat/regs-serial.h> #include <plat/regs-spi.h> #include <linux/platform_data/spi-s3c64xx.h> @@ -146,14 +146,20 @@ struct platform_device s3c_device_camif = { /* ASOC DMA */ +#ifdef CONFIG_PLAT_S5P +static struct resource samsung_asoc_idma_resource = DEFINE_RES_IRQ(IRQ_I2S0); + struct platform_device samsung_asoc_idma = { .name = "samsung-idma", .id = -1, + .num_resources = 1, + .resource = &samsung_asoc_idma_resource, .dev = { .dma_mask = &samsung_device_dma_mask, .coherent_dma_mask = DMA_BIT_MASK(32), } }; +#endif /* FB */ @@ -878,51 +884,6 @@ void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd) } #endif /* CONFIG_PLAT_S3C24XX */ -/* MFC */ - -#ifdef CONFIG_S5P_DEV_MFC -static struct resource s5p_mfc_resource[] = { - [0] = DEFINE_RES_MEM(S5P_PA_MFC, SZ_64K), - [1] = DEFINE_RES_IRQ(IRQ_MFC), -}; - -struct platform_device s5p_device_mfc = { - .name = "s5p-mfc", - .id = -1, - .num_resources = ARRAY_SIZE(s5p_mfc_resource), - .resource = s5p_mfc_resource, -}; - -/* - * MFC hardware has 2 memory interfaces which are modelled as two separate - * platform devices to let dma-mapping distinguish between them. - * - * MFC parent device (s5p_device_mfc) must be registered before memory - * interface specific devices (s5p_device_mfc_l and s5p_device_mfc_r). - */ - -struct platform_device s5p_device_mfc_l = { - .name = "s5p-mfc-l", - .id = -1, - .dev = { - .parent = &s5p_device_mfc.dev, - .dma_mask = &samsung_device_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -struct platform_device s5p_device_mfc_r = { - .name = "s5p-mfc-r", - .id = -1, - .dev = { - .parent = &s5p_device_mfc.dev, - .dma_mask = &samsung_device_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -#endif /* CONFIG_S5P_DEV_MFC */ - /* MIPI CSIS */ #ifdef CONFIG_S5P_DEV_CSIS0 @@ -1113,7 +1074,7 @@ struct platform_device s5p_device_onenand = { /* PMU */ -#ifdef CONFIG_PLAT_S5P +#if defined(CONFIG_PLAT_S5P) && !defined(CONFIG_ARCH_EXYNOS) static struct resource s5p_pmu_resource[] = { DEFINE_RES_IRQ(IRQ_PMU) }; @@ -1552,6 +1513,9 @@ void __init s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, pd.num_cs = num_cs; pd.src_clk_nr = src_clk_nr; pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi0_cfg_gpio; +#ifdef CONFIG_PL330_DMA + pd.filter = pl330_filter; +#endif s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi0); } @@ -1590,6 +1554,9 @@ void __init s3c64xx_spi1_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, pd.num_cs = num_cs; pd.src_clk_nr = src_clk_nr; pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi1_cfg_gpio; +#ifdef CONFIG_PL330_DMA + pd.filter = pl330_filter; +#endif s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi1); } @@ -1628,6 +1595,9 @@ void __init s3c64xx_spi2_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, pd.num_cs = num_cs; pd.src_clk_nr = src_clk_nr; pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi2_cfg_gpio; +#ifdef CONFIG_PL330_DMA + pd.filter = pl330_filter; +#endif s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi2); } diff --git a/arch/arm/plat-samsung/dma-ops.c b/arch/arm/plat-samsung/dma-ops.c index 71d58ddea9c1..ec0d731b0e7b 100644 --- a/arch/arm/plat-samsung/dma-ops.c +++ b/arch/arm/plat-samsung/dma-ops.c @@ -23,23 +23,15 @@ static unsigned samsung_dmadev_request(enum dma_ch dma_ch, struct device *dev, char *ch_name) { dma_cap_mask_t mask; - void *filter_param; dma_cap_zero(mask); dma_cap_set(param->cap, mask); - /* - * If a dma channel property of a device node from device tree is - * specified, use that as the fliter parameter. - */ - filter_param = (dma_ch == DMACH_DT_PROP) ? - (void *)param->dt_dmach_prop : (void *)dma_ch; - if (dev->of_node) return (unsigned)dma_request_slave_channel(dev, ch_name); else return (unsigned)dma_request_channel(mask, pl330_filter, - filter_param); + (void *)dma_ch); } static int samsung_dmadev_release(unsigned ch, void *param) diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h index 37703ef6dfc7..989fefe18be6 100644 --- a/arch/arm/plat-samsung/include/plat/cpu.h +++ b/arch/arm/plat-samsung/include/plat/cpu.h @@ -23,6 +23,9 @@ extern unsigned long samsung_cpu_id; #define S3C24XX_CPU_ID 0x32400000 #define S3C24XX_CPU_MASK 0xFFF00000 +#define S3C2412_CPU_ID 0x32412000 +#define S3C2412_CPU_MASK 0xFFFFF000 + #define S3C6400_CPU_ID 0x36400000 #define S3C6410_CPU_ID 0x36410000 #define S3C64XX_CPU_MASK 0xFFFFF000 @@ -53,6 +56,7 @@ static inline int is_samsung_##name(void) \ } IS_SAMSUNG_CPU(s3c24xx, S3C24XX_CPU_ID, S3C24XX_CPU_MASK) +IS_SAMSUNG_CPU(s3c2412, S3C2412_CPU_ID, S3C2412_CPU_MASK) IS_SAMSUNG_CPU(s3c6400, S3C6400_CPU_ID, S3C64XX_CPU_MASK) IS_SAMSUNG_CPU(s3c6410, S3C6410_CPU_ID, S3C64XX_CPU_MASK) IS_SAMSUNG_CPU(s5p6440, S5P6440_CPU_ID, S5P64XX_CPU_MASK) @@ -74,6 +78,12 @@ IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID, EXYNOS5_SOC_MASK) # define soc_is_s3c24xx() 0 #endif +#if defined(CONFIG_CPU_S3C2412) +# define soc_is_s3c2412() is_samsung_s3c2412() +#else +# define soc_is_s3c2412() 0 +#endif + #if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410) # define soc_is_s3c64xx() (is_samsung_s3c6400() || is_samsung_s3c6410()) #else @@ -173,7 +183,6 @@ extern void s3c_init_cpu(unsigned long idcode, /* core initialisation functions */ -extern void s3c24xx_init_irq(void); extern void s5p_init_irq(u32 *vic, u32 num_vic); extern void s3c24xx_init_io(struct map_desc *mach_desc, int size); @@ -192,10 +201,6 @@ extern void s3c24xx_init_uartdevs(char *name, struct s3c24xx_uart_resources *res, struct s3c2410_uartcfg *cfg, int no); -/* timer for 2410/2440 */ - -extern void s3c24xx_timer_init(void); - extern struct syscore_ops s3c2410_pm_syscore_ops; extern struct syscore_ops s3c2412_pm_syscore_ops; extern struct syscore_ops s3c2416_pm_syscore_ops; diff --git a/arch/arm/plat-samsung/include/plat/dma-ops.h b/arch/arm/plat-samsung/include/plat/dma-ops.h index 114178268b75..ce6d7634b6cb 100644 --- a/arch/arm/plat-samsung/include/plat/dma-ops.h +++ b/arch/arm/plat-samsung/include/plat/dma-ops.h @@ -18,7 +18,6 @@ struct samsung_dma_req { enum dma_transaction_type cap; - struct property *dt_dmach_prop; struct s3c2410_dma_client *client; }; diff --git a/arch/arm/plat-samsung/include/plat/dma-pl330.h b/arch/arm/plat-samsung/include/plat/dma-pl330.h index d384a8016b47..abe07fae71db 100644 --- a/arch/arm/plat-samsung/include/plat/dma-pl330.h +++ b/arch/arm/plat-samsung/include/plat/dma-pl330.h @@ -21,7 +21,6 @@ * use these just as IDs. */ enum dma_ch { - DMACH_DT_PROP = -1, DMACH_UART0_RX = 0, DMACH_UART0_TX, DMACH_UART1_RX, diff --git a/arch/arm/plat-samsung/include/plat/fb.h b/arch/arm/plat-samsung/include/plat/fb.h index b885322717a1..9ae507270785 100644 --- a/arch/arm/plat-samsung/include/plat/fb.h +++ b/arch/arm/plat-samsung/include/plat/fb.h @@ -15,55 +15,7 @@ #ifndef __PLAT_S3C_FB_H #define __PLAT_S3C_FB_H __FILE__ -/* S3C_FB_MAX_WIN - * Set to the maximum number of windows that any of the supported hardware - * can use. Since the platform data uses this for an array size, having it - * set to the maximum of any version of the hardware can do is safe. - */ -#define S3C_FB_MAX_WIN (5) - -/** - * struct s3c_fb_pd_win - per window setup data - * @xres : The window X size. - * @yres : The window Y size. - * @virtual_x: The virtual X size. - * @virtual_y: The virtual Y size. - */ -struct s3c_fb_pd_win { - unsigned short default_bpp; - unsigned short max_bpp; - unsigned short xres; - unsigned short yres; - unsigned short virtual_x; - unsigned short virtual_y; -}; - -/** - * struct s3c_fb_platdata - S3C driver platform specific information - * @setup_gpio: Setup the external GPIO pins to the right state to transfer - * the data from the display system to the connected display - * device. - * @vidcon0: The base vidcon0 values to control the panel data format. - * @vidcon1: The base vidcon1 values to control the panel data output. - * @vtiming: Video timing when connected to a RGB type panel. - * @win: The setup data for each hardware window, or NULL for unused. - * @display_mode: The LCD output display mode. - * - * The platform data supplies the video driver with all the information - * it requires to work with the display(s) attached to the machine. It - * controls the initial mode, the number of display windows (0 is always - * the base framebuffer) that are initialised etc. - * - */ -struct s3c_fb_platdata { - void (*setup_gpio)(void); - - struct s3c_fb_pd_win *win[S3C_FB_MAX_WIN]; - struct fb_videomode *vtiming; - - u32 vidcon0; - u32 vidcon1; -}; +#include <linux/platform_data/video_s3c.h> /** * s3c_fb_set_platdata() - Setup the FB device with platform data. diff --git a/arch/arm/plat-samsung/include/plat/irq.h b/arch/arm/plat-samsung/include/plat/irq.h deleted file mode 100644 index e21a89bc26c9..000000000000 --- a/arch/arm/plat-samsung/include/plat/irq.h +++ /dev/null @@ -1,116 +0,0 @@ -/* linux/arch/arm/plat-samsung/include/plat/irq.h - * - * Copyright (c) 2004-2005 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Header file for S3C24XX CPU IRQ support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/io.h> - -#include <mach/hardware.h> -#include <mach/regs-irq.h> -#include <mach/regs-gpio.h> - -#define irqdbf(x...) -#define irqdbf2(x...) - -#define EXTINT_OFF (IRQ_EINT4 - 4) - -/* these are exported for arch/arm/mach-* usage */ -extern struct irq_chip s3c_irq_level_chip; -extern struct irq_chip s3c_irq_chip; - -static inline void s3c_irqsub_mask(unsigned int irqno, - unsigned int parentbit, - int subcheck) -{ - unsigned long mask; - unsigned long submask; - - submask = __raw_readl(S3C2410_INTSUBMSK); - mask = __raw_readl(S3C2410_INTMSK); - - submask |= (1UL << (irqno - IRQ_S3CUART_RX0)); - - /* check to see if we need to mask the parent IRQ */ - - if ((submask & subcheck) == subcheck) - __raw_writel(mask | parentbit, S3C2410_INTMSK); - - /* write back masks */ - __raw_writel(submask, S3C2410_INTSUBMSK); - -} - -static inline void s3c_irqsub_unmask(unsigned int irqno, - unsigned int parentbit) -{ - unsigned long mask; - unsigned long submask; - - submask = __raw_readl(S3C2410_INTSUBMSK); - mask = __raw_readl(S3C2410_INTMSK); - - submask &= ~(1UL << (irqno - IRQ_S3CUART_RX0)); - mask &= ~parentbit; - - /* write back masks */ - __raw_writel(submask, S3C2410_INTSUBMSK); - __raw_writel(mask, S3C2410_INTMSK); -} - - -static inline void s3c_irqsub_maskack(unsigned int irqno, - unsigned int parentmask, - unsigned int group) -{ - unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0); - - s3c_irqsub_mask(irqno, parentmask, group); - - __raw_writel(bit, S3C2410_SUBSRCPND); - - /* only ack parent if we've got all the irqs (seems we must - * ack, all and hope that the irq system retriggers ok when - * the interrupt goes off again) - */ - - if (1) { - __raw_writel(parentmask, S3C2410_SRCPND); - __raw_writel(parentmask, S3C2410_INTPND); - } -} - -static inline void s3c_irqsub_ack(unsigned int irqno, - unsigned int parentmask, - unsigned int group) -{ - unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0); - - __raw_writel(bit, S3C2410_SUBSRCPND); - - /* only ack parent if we've got all the irqs (seems we must - * ack, all and hope that the irq system retriggers ok when - * the interrupt goes off again) - */ - - if (1) { - __raw_writel(parentmask, S3C2410_SRCPND); - __raw_writel(parentmask, S3C2410_INTPND); - } -} - -/* exported for use in arch/arm/mach-s3c2410 */ - -#ifdef CONFIG_PM -extern int s3c_irq_wake(struct irq_data *data, unsigned int state); -#else -#define s3c_irq_wake NULL -#endif - -extern int s3c_irqext_type(struct irq_data *d, unsigned int type); diff --git a/arch/arm/plat-samsung/include/plat/map-s5p.h b/arch/arm/plat-samsung/include/plat/map-s5p.h index c2d7bdae5891..c18678610bc0 100644 --- a/arch/arm/plat-samsung/include/plat/map-s5p.h +++ b/arch/arm/plat-samsung/include/plat/map-s5p.h @@ -22,6 +22,7 @@ #define S5P_VA_GPIO3 S3C_ADDR(0x02280000) #define S5P_VA_SYSRAM S3C_ADDR(0x02400000) +#define S5P_VA_SYSRAM_NS S3C_ADDR(0x02410000) #define S5P_VA_DMC0 S3C_ADDR(0x02440000) #define S5P_VA_DMC1 S3C_ADDR(0x02480000) #define S5P_VA_SROMC S3C_ADDR(0x024C0000) diff --git a/arch/arm/plat-samsung/include/plat/regs-ac97.h b/arch/arm/plat-samsung/include/plat/regs-ac97.h deleted file mode 100644 index c3878f7acb83..000000000000 --- a/arch/arm/plat-samsung/include/plat/regs-ac97.h +++ /dev/null @@ -1,67 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-ac97.h - * - * Copyright (c) 2006 Simtec Electronics <linux@simtec.co.uk> - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2440 AC97 Controller -*/ - -#ifndef __ASM_ARCH_REGS_AC97_H -#define __ASM_ARCH_REGS_AC97_H __FILE__ - -#define S3C_AC97_GLBCTRL (0x00) - -#define S3C_AC97_GLBCTRL_CODECREADYIE (1<<22) -#define S3C_AC97_GLBCTRL_PCMOUTURIE (1<<21) -#define S3C_AC97_GLBCTRL_PCMINORIE (1<<20) -#define S3C_AC97_GLBCTRL_MICINORIE (1<<19) -#define S3C_AC97_GLBCTRL_PCMOUTTIE (1<<18) -#define S3C_AC97_GLBCTRL_PCMINTIE (1<<17) -#define S3C_AC97_GLBCTRL_MICINTIE (1<<16) -#define S3C_AC97_GLBCTRL_PCMOUTTM_OFF (0<<12) -#define S3C_AC97_GLBCTRL_PCMOUTTM_PIO (1<<12) -#define S3C_AC97_GLBCTRL_PCMOUTTM_DMA (2<<12) -#define S3C_AC97_GLBCTRL_PCMOUTTM_MASK (3<<12) -#define S3C_AC97_GLBCTRL_PCMINTM_OFF (0<<10) -#define S3C_AC97_GLBCTRL_PCMINTM_PIO (1<<10) -#define S3C_AC97_GLBCTRL_PCMINTM_DMA (2<<10) -#define S3C_AC97_GLBCTRL_PCMINTM_MASK (3<<10) -#define S3C_AC97_GLBCTRL_MICINTM_OFF (0<<8) -#define S3C_AC97_GLBCTRL_MICINTM_PIO (1<<8) -#define S3C_AC97_GLBCTRL_MICINTM_DMA (2<<8) -#define S3C_AC97_GLBCTRL_MICINTM_MASK (3<<8) -#define S3C_AC97_GLBCTRL_TRANSFERDATAENABLE (1<<3) -#define S3C_AC97_GLBCTRL_ACLINKON (1<<2) -#define S3C_AC97_GLBCTRL_WARMRESET (1<<1) -#define S3C_AC97_GLBCTRL_COLDRESET (1<<0) - -#define S3C_AC97_GLBSTAT (0x04) - -#define S3C_AC97_GLBSTAT_CODECREADY (1<<22) -#define S3C_AC97_GLBSTAT_PCMOUTUR (1<<21) -#define S3C_AC97_GLBSTAT_PCMINORI (1<<20) -#define S3C_AC97_GLBSTAT_MICINORI (1<<19) -#define S3C_AC97_GLBSTAT_PCMOUTTI (1<<18) -#define S3C_AC97_GLBSTAT_PCMINTI (1<<17) -#define S3C_AC97_GLBSTAT_MICINTI (1<<16) -#define S3C_AC97_GLBSTAT_MAINSTATE_IDLE (0<<0) -#define S3C_AC97_GLBSTAT_MAINSTATE_INIT (1<<0) -#define S3C_AC97_GLBSTAT_MAINSTATE_READY (2<<0) -#define S3C_AC97_GLBSTAT_MAINSTATE_ACTIVE (3<<0) -#define S3C_AC97_GLBSTAT_MAINSTATE_LP (4<<0) -#define S3C_AC97_GLBSTAT_MAINSTATE_WARM (5<<0) - -#define S3C_AC97_CODEC_CMD (0x08) - -#define S3C_AC97_CODEC_CMD_READ (1<<23) - -#define S3C_AC97_STAT (0x0c) -#define S3C_AC97_PCM_ADDR (0x10) -#define S3C_AC97_PCM_DATA (0x18) -#define S3C_AC97_MIC_DATA (0x1C) - -#endif /* __ASM_ARCH_REGS_AC97_H */ diff --git a/arch/arm/plat-samsung/include/plat/regs-iic.h b/arch/arm/plat-samsung/include/plat/regs-iic.h deleted file mode 100644 index 2f7c17de8ac8..000000000000 --- a/arch/arm/plat-samsung/include/plat/regs-iic.h +++ /dev/null @@ -1,56 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-iic.h - * - * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk> - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2410 I2C Controller -*/ - -#ifndef __ASM_ARCH_REGS_IIC_H -#define __ASM_ARCH_REGS_IIC_H __FILE__ - -/* see s3c2410x user guide, v1.1, section 9 (p447) for more info */ - -#define S3C2410_IICREG(x) (x) - -#define S3C2410_IICCON S3C2410_IICREG(0x00) -#define S3C2410_IICSTAT S3C2410_IICREG(0x04) -#define S3C2410_IICADD S3C2410_IICREG(0x08) -#define S3C2410_IICDS S3C2410_IICREG(0x0C) -#define S3C2440_IICLC S3C2410_IICREG(0x10) - -#define S3C2410_IICCON_ACKEN (1<<7) -#define S3C2410_IICCON_TXDIV_16 (0<<6) -#define S3C2410_IICCON_TXDIV_512 (1<<6) -#define S3C2410_IICCON_IRQEN (1<<5) -#define S3C2410_IICCON_IRQPEND (1<<4) -#define S3C2410_IICCON_SCALE(x) ((x)&15) -#define S3C2410_IICCON_SCALEMASK (0xf) - -#define S3C2410_IICSTAT_MASTER_RX (2<<6) -#define S3C2410_IICSTAT_MASTER_TX (3<<6) -#define S3C2410_IICSTAT_SLAVE_RX (0<<6) -#define S3C2410_IICSTAT_SLAVE_TX (1<<6) -#define S3C2410_IICSTAT_MODEMASK (3<<6) - -#define S3C2410_IICSTAT_START (1<<5) -#define S3C2410_IICSTAT_BUSBUSY (1<<5) -#define S3C2410_IICSTAT_TXRXEN (1<<4) -#define S3C2410_IICSTAT_ARBITR (1<<3) -#define S3C2410_IICSTAT_ASSLAVE (1<<2) -#define S3C2410_IICSTAT_ADDR0 (1<<1) -#define S3C2410_IICSTAT_LASTBIT (1<<0) - -#define S3C2410_IICLC_SDA_DELAY0 (0 << 0) -#define S3C2410_IICLC_SDA_DELAY5 (1 << 0) -#define S3C2410_IICLC_SDA_DELAY10 (2 << 0) -#define S3C2410_IICLC_SDA_DELAY15 (3 << 0) -#define S3C2410_IICLC_SDA_DELAY_MASK (3 << 0) - -#define S3C2410_IICLC_FILTER_ON (1<<2) - -#endif /* __ASM_ARCH_REGS_IIC_H */ diff --git a/arch/arm/plat-samsung/include/plat/regs-iis.h b/arch/arm/plat-samsung/include/plat/regs-iis.h deleted file mode 100644 index a18d35e7a735..000000000000 --- a/arch/arm/plat-samsung/include/plat/regs-iis.h +++ /dev/null @@ -1,70 +0,0 @@ -/* arch/arm/plat-samsung/include/plat/regs-iis.h - * - * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk> - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2410 IIS register definition -*/ - -#ifndef __ASM_ARCH_REGS_IIS_H -#define __ASM_ARCH_REGS_IIS_H - -#define S3C2410_IISCON (0x00) - -#define S3C2410_IISCON_LRINDEX (1 << 8) -#define S3C2410_IISCON_TXFIFORDY (1 << 7) -#define S3C2410_IISCON_RXFIFORDY (1 << 6) -#define S3C2410_IISCON_TXDMAEN (1 << 5) -#define S3C2410_IISCON_RXDMAEN (1 << 4) -#define S3C2410_IISCON_TXIDLE (1 << 3) -#define S3C2410_IISCON_RXIDLE (1 << 2) -#define S3C2410_IISCON_PSCEN (1 << 1) -#define S3C2410_IISCON_IISEN (1 << 0) - -#define S3C2410_IISMOD (0x04) - -#define S3C2440_IISMOD_MPLL (1 << 9) -#define S3C2410_IISMOD_SLAVE (1 << 8) -#define S3C2410_IISMOD_NOXFER (0 << 6) -#define S3C2410_IISMOD_RXMODE (1 << 6) -#define S3C2410_IISMOD_TXMODE (2 << 6) -#define S3C2410_IISMOD_TXRXMODE (3 << 6) -#define S3C2410_IISMOD_LR_LLOW (0 << 5) -#define S3C2410_IISMOD_LR_RLOW (1 << 5) -#define S3C2410_IISMOD_IIS (0 << 4) -#define S3C2410_IISMOD_MSB (1 << 4) -#define S3C2410_IISMOD_8BIT (0 << 3) -#define S3C2410_IISMOD_16BIT (1 << 3) -#define S3C2410_IISMOD_BITMASK (1 << 3) -#define S3C2410_IISMOD_256FS (0 << 2) -#define S3C2410_IISMOD_384FS (1 << 2) -#define S3C2410_IISMOD_16FS (0 << 0) -#define S3C2410_IISMOD_32FS (1 << 0) -#define S3C2410_IISMOD_48FS (2 << 0) -#define S3C2410_IISMOD_FS_MASK (3 << 0) - -#define S3C2410_IISPSR (0x08) - -#define S3C2410_IISPSR_INTMASK (31 << 5) -#define S3C2410_IISPSR_INTSHIFT (5) -#define S3C2410_IISPSR_EXTMASK (31 << 0) -#define S3C2410_IISPSR_EXTSHFIT (0) - -#define S3C2410_IISFCON (0x0c) - -#define S3C2410_IISFCON_TXDMA (1 << 15) -#define S3C2410_IISFCON_RXDMA (1 << 14) -#define S3C2410_IISFCON_TXENABLE (1 << 13) -#define S3C2410_IISFCON_RXENABLE (1 << 12) -#define S3C2410_IISFCON_TXMASK (0x3f << 6) -#define S3C2410_IISFCON_TXSHIFT (6) -#define S3C2410_IISFCON_RXMASK (0x3f) -#define S3C2410_IISFCON_RXSHIFT (0) - -#define S3C2410_IISFIFO (0x10) - -#endif /* __ASM_ARCH_REGS_IIS_H */ diff --git a/arch/arm/plat-samsung/include/plat/regs-onenand.h b/arch/arm/plat-samsung/include/plat/regs-onenand.h deleted file mode 100644 index 930ea8b88ed3..000000000000 --- a/arch/arm/plat-samsung/include/plat/regs-onenand.h +++ /dev/null @@ -1,63 +0,0 @@ -/* - * linux/arch/arm/plat-s3c/include/plat/regs-onenand.h - * - * Copyright (C) 2008-2010 Samsung Electronics - * Kyungmin Park <kyungmin.park@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __SAMSUNG_ONENAND_H__ -#define __SAMSUNG_ONENAND_H__ - -#include <mach/hardware.h> - -/* - * OneNAND Controller - */ -#define MEM_CFG_OFFSET 0x0000 -#define BURST_LEN_OFFSET 0x0010 -#define MEM_RESET_OFFSET 0x0020 -#define INT_ERR_STAT_OFFSET 0x0030 -#define INT_ERR_MASK_OFFSET 0x0040 -#define INT_ERR_ACK_OFFSET 0x0050 -#define ECC_ERR_STAT_OFFSET 0x0060 -#define MANUFACT_ID_OFFSET 0x0070 -#define DEVICE_ID_OFFSET 0x0080 -#define DATA_BUF_SIZE_OFFSET 0x0090 -#define BOOT_BUF_SIZE_OFFSET 0x00A0 -#define BUF_AMOUNT_OFFSET 0x00B0 -#define TECH_OFFSET 0x00C0 -#define FBA_WIDTH_OFFSET 0x00D0 -#define FPA_WIDTH_OFFSET 0x00E0 -#define FSA_WIDTH_OFFSET 0x00F0 -#define TRANS_SPARE_OFFSET 0x0140 -#define DBS_DFS_WIDTH_OFFSET 0x0160 -#define INT_PIN_ENABLE_OFFSET 0x01A0 -#define ACC_CLOCK_OFFSET 0x01C0 -#define FLASH_VER_ID_OFFSET 0x01F0 -#define FLASH_AUX_CNTRL_OFFSET 0x0300 /* s3c64xx only */ - -#define ONENAND_MEM_RESET_HOT 0x3 -#define ONENAND_MEM_RESET_COLD 0x2 -#define ONENAND_MEM_RESET_WARM 0x1 - -#define CACHE_OP_ERR (1 << 13) -#define RST_CMP (1 << 12) -#define RDY_ACT (1 << 11) -#define INT_ACT (1 << 10) -#define UNSUP_CMD (1 << 9) -#define LOCKED_BLK (1 << 8) -#define BLK_RW_CMP (1 << 7) -#define ERS_CMP (1 << 6) -#define PGM_CMP (1 << 5) -#define LOAD_CMP (1 << 4) -#define ERS_FAIL (1 << 3) -#define PGM_FAIL (1 << 2) -#define INT_TO (1 << 1) -#define LD_FAIL_ECC_ERR (1 << 0) - -#define TSRF (1 << 0) - -#endif diff --git a/arch/arm/plat-samsung/include/plat/regs-rtc.h b/arch/arm/plat-samsung/include/plat/regs-rtc.h deleted file mode 100644 index 0f8263e93eea..000000000000 --- a/arch/arm/plat-samsung/include/plat/regs-rtc.h +++ /dev/null @@ -1,71 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-rtc.h - * - * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk> - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2410 Internal RTC register definition -*/ - -#ifndef __ASM_ARCH_REGS_RTC_H -#define __ASM_ARCH_REGS_RTC_H __FILE__ - -#define S3C2410_RTCREG(x) (x) -#define S3C2410_INTP S3C2410_RTCREG(0x30) -#define S3C2410_INTP_ALM (1 << 1) -#define S3C2410_INTP_TIC (1 << 0) - -#define S3C2410_RTCCON S3C2410_RTCREG(0x40) -#define S3C2410_RTCCON_RTCEN (1 << 0) -#define S3C2410_RTCCON_CNTSEL (1 << 2) -#define S3C2410_RTCCON_CLKRST (1 << 3) -#define S3C2443_RTCCON_TICSEL (1 << 4) -#define S3C64XX_RTCCON_TICEN (1 << 8) - -#define S3C2410_TICNT S3C2410_RTCREG(0x44) -#define S3C2410_TICNT_ENABLE (1 << 7) - -/* S3C2443: tick count is 15 bit wide - * TICNT[6:0] contains upper 7 bits - * TICNT1[7:0] contains lower 8 bits - */ -#define S3C2443_TICNT_PART(x) ((x & 0x7f00) >> 8) -#define S3C2443_TICNT1 S3C2410_RTCREG(0x4C) -#define S3C2443_TICNT1_PART(x) (x & 0xff) - -/* S3C2416: tick count is 32 bit wide - * TICNT[6:0] contains bits [14:8] - * TICNT1[7:0] contains lower 8 bits - * TICNT2[16:0] contains upper 17 bits - */ -#define S3C2416_TICNT2 S3C2410_RTCREG(0x48) -#define S3C2416_TICNT2_PART(x) ((x & 0xffff8000) >> 15) - -#define S3C2410_RTCALM S3C2410_RTCREG(0x50) -#define S3C2410_RTCALM_ALMEN (1 << 6) -#define S3C2410_RTCALM_YEAREN (1 << 5) -#define S3C2410_RTCALM_MONEN (1 << 4) -#define S3C2410_RTCALM_DAYEN (1 << 3) -#define S3C2410_RTCALM_HOUREN (1 << 2) -#define S3C2410_RTCALM_MINEN (1 << 1) -#define S3C2410_RTCALM_SECEN (1 << 0) - -#define S3C2410_ALMSEC S3C2410_RTCREG(0x54) -#define S3C2410_ALMMIN S3C2410_RTCREG(0x58) -#define S3C2410_ALMHOUR S3C2410_RTCREG(0x5c) - -#define S3C2410_ALMDATE S3C2410_RTCREG(0x60) -#define S3C2410_ALMMON S3C2410_RTCREG(0x64) -#define S3C2410_ALMYEAR S3C2410_RTCREG(0x68) - -#define S3C2410_RTCSEC S3C2410_RTCREG(0x70) -#define S3C2410_RTCMIN S3C2410_RTCREG(0x74) -#define S3C2410_RTCHOUR S3C2410_RTCREG(0x78) -#define S3C2410_RTCDATE S3C2410_RTCREG(0x7c) -#define S3C2410_RTCMON S3C2410_RTCREG(0x84) -#define S3C2410_RTCYEAR S3C2410_RTCREG(0x88) - -#endif /* __ASM_ARCH_REGS_RTC_H */ diff --git a/arch/arm/plat-samsung/include/plat/regs-sdhci.h b/arch/arm/plat-samsung/include/plat/regs-sdhci.h deleted file mode 100644 index e34049ad44cc..000000000000 --- a/arch/arm/plat-samsung/include/plat/regs-sdhci.h +++ /dev/null @@ -1,87 +0,0 @@ -/* linux/arch/arm/plat-s3c/include/plat/regs-sdhci.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C Platform - SDHCI (HSMMC) register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __PLAT_S3C_SDHCI_REGS_H -#define __PLAT_S3C_SDHCI_REGS_H __FILE__ - -#define S3C_SDHCI_CONTROL2 (0x80) -#define S3C_SDHCI_CONTROL3 (0x84) -#define S3C64XX_SDHCI_CONTROL4 (0x8C) - -#define S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR (1 << 31) -#define S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK (1 << 30) -#define S3C_SDHCI_CTRL2_CDINVRXD3 (1 << 29) -#define S3C_SDHCI_CTRL2_SLCARDOUT (1 << 28) - -#define S3C_SDHCI_CTRL2_FLTCLKSEL_MASK (0xf << 24) -#define S3C_SDHCI_CTRL2_FLTCLKSEL_SHIFT (24) -#define S3C_SDHCI_CTRL2_FLTCLKSEL(_x) ((_x) << 24) - -#define S3C_SDHCI_CTRL2_LVLDAT_MASK (0xff << 16) -#define S3C_SDHCI_CTRL2_LVLDAT_SHIFT (16) -#define S3C_SDHCI_CTRL2_LVLDAT(_x) ((_x) << 16) - -#define S3C_SDHCI_CTRL2_ENFBCLKTX (1 << 15) -#define S3C_SDHCI_CTRL2_ENFBCLKRX (1 << 14) -#define S3C_SDHCI_CTRL2_SDCDSEL (1 << 13) -#define S3C_SDHCI_CTRL2_SDSIGPC (1 << 12) -#define S3C_SDHCI_CTRL2_ENBUSYCHKTXSTART (1 << 11) - -#define S3C_SDHCI_CTRL2_DFCNT_MASK (0x3 << 9) -#define S3C_SDHCI_CTRL2_DFCNT_SHIFT (9) -#define S3C_SDHCI_CTRL2_DFCNT_NONE (0x0 << 9) -#define S3C_SDHCI_CTRL2_DFCNT_4SDCLK (0x1 << 9) -#define S3C_SDHCI_CTRL2_DFCNT_16SDCLK (0x2 << 9) -#define S3C_SDHCI_CTRL2_DFCNT_64SDCLK (0x3 << 9) - -#define S3C_SDHCI_CTRL2_ENCLKOUTHOLD (1 << 8) -#define S3C_SDHCI_CTRL2_RWAITMODE (1 << 7) -#define S3C_SDHCI_CTRL2_DISBUFRD (1 << 6) -#define S3C_SDHCI_CTRL2_SELBASECLK_MASK (0x3 << 4) -#define S3C_SDHCI_CTRL2_SELBASECLK_SHIFT (4) -#define S3C_SDHCI_CTRL2_PWRSYNC (1 << 3) -#define S3C_SDHCI_CTRL2_ENCLKOUTMSKCON (1 << 1) -#define S3C_SDHCI_CTRL2_HWINITFIN (1 << 0) - -#define S3C_SDHCI_CTRL3_FCSEL3 (1 << 31) -#define S3C_SDHCI_CTRL3_FCSEL2 (1 << 23) -#define S3C_SDHCI_CTRL3_FCSEL1 (1 << 15) -#define S3C_SDHCI_CTRL3_FCSEL0 (1 << 7) - -#define S3C_SDHCI_CTRL3_FIA3_MASK (0x7f << 24) -#define S3C_SDHCI_CTRL3_FIA3_SHIFT (24) -#define S3C_SDHCI_CTRL3_FIA3(_x) ((_x) << 24) - -#define S3C_SDHCI_CTRL3_FIA2_MASK (0x7f << 16) -#define S3C_SDHCI_CTRL3_FIA2_SHIFT (16) -#define S3C_SDHCI_CTRL3_FIA2(_x) ((_x) << 16) - -#define S3C_SDHCI_CTRL3_FIA1_MASK (0x7f << 8) -#define S3C_SDHCI_CTRL3_FIA1_SHIFT (8) -#define S3C_SDHCI_CTRL3_FIA1(_x) ((_x) << 8) - -#define S3C_SDHCI_CTRL3_FIA0_MASK (0x7f << 0) -#define S3C_SDHCI_CTRL3_FIA0_SHIFT (0) -#define S3C_SDHCI_CTRL3_FIA0(_x) ((_x) << 0) - -#define S3C64XX_SDHCI_CONTROL4_DRIVE_MASK (0x3 << 16) -#define S3C64XX_SDHCI_CONTROL4_DRIVE_SHIFT (16) -#define S3C64XX_SDHCI_CONTROL4_DRIVE_2mA (0x0 << 16) -#define S3C64XX_SDHCI_CONTROL4_DRIVE_4mA (0x1 << 16) -#define S3C64XX_SDHCI_CONTROL4_DRIVE_7mA (0x2 << 16) -#define S3C64XX_SDHCI_CONTROL4_DRIVE_9mA (0x3 << 16) - -#define S3C64XX_SDHCI_CONTROL4_BUSY (1) - -#endif /* __PLAT_S3C_SDHCI_REGS_H */ diff --git a/arch/arm/plat-samsung/include/plat/regs-serial.h b/arch/arm/plat-samsung/include/plat/regs-serial.h index 29c26a818842..f05f2afa440d 100644 --- a/arch/arm/plat-samsung/include/plat/regs-serial.h +++ b/arch/arm/plat-samsung/include/plat/regs-serial.h @@ -1,281 +1 @@ -/* arch/arm/plat-samsung/include/plat/regs-serial.h - * - * From linux/include/asm-arm/hardware/serial_s3c2410.h - * - * Internal header file for Samsung S3C2410 serial ports (UART0-2) - * - * Copyright (C) 2002 Shane Nay (shane@minirl.com) - * - * Additional defines, Copyright 2003 Simtec Electronics (linux@simtec.co.uk) - * - * Adapted from: - * - * Internal header file for MX1ADS serial ports (UART1 & 2) - * - * Copyright (C) 2002 Shane Nay (shane@minirl.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#ifndef __ASM_ARM_REGS_SERIAL_H -#define __ASM_ARM_REGS_SERIAL_H - -#define S3C24XX_VA_UART0 (S3C_VA_UART) -#define S3C24XX_VA_UART1 (S3C_VA_UART + 0x4000 ) -#define S3C24XX_VA_UART2 (S3C_VA_UART + 0x8000 ) -#define S3C24XX_VA_UART3 (S3C_VA_UART + 0xC000 ) - -#define S3C2410_PA_UART0 (S3C24XX_PA_UART) -#define S3C2410_PA_UART1 (S3C24XX_PA_UART + 0x4000 ) -#define S3C2410_PA_UART2 (S3C24XX_PA_UART + 0x8000 ) -#define S3C2443_PA_UART3 (S3C24XX_PA_UART + 0xC000 ) - -#define S3C2410_URXH (0x24) -#define S3C2410_UTXH (0x20) -#define S3C2410_ULCON (0x00) -#define S3C2410_UCON (0x04) -#define S3C2410_UFCON (0x08) -#define S3C2410_UMCON (0x0C) -#define S3C2410_UBRDIV (0x28) -#define S3C2410_UTRSTAT (0x10) -#define S3C2410_UERSTAT (0x14) -#define S3C2410_UFSTAT (0x18) -#define S3C2410_UMSTAT (0x1C) - -#define S3C2410_LCON_CFGMASK ((0xF<<3)|(0x3)) - -#define S3C2410_LCON_CS5 (0x0) -#define S3C2410_LCON_CS6 (0x1) -#define S3C2410_LCON_CS7 (0x2) -#define S3C2410_LCON_CS8 (0x3) -#define S3C2410_LCON_CSMASK (0x3) - -#define S3C2410_LCON_PNONE (0x0) -#define S3C2410_LCON_PEVEN (0x5 << 3) -#define S3C2410_LCON_PODD (0x4 << 3) -#define S3C2410_LCON_PMASK (0x7 << 3) - -#define S3C2410_LCON_STOPB (1<<2) -#define S3C2410_LCON_IRM (1<<6) - -#define S3C2440_UCON_CLKMASK (3<<10) -#define S3C2440_UCON_CLKSHIFT (10) -#define S3C2440_UCON_PCLK (0<<10) -#define S3C2440_UCON_UCLK (1<<10) -#define S3C2440_UCON_PCLK2 (2<<10) -#define S3C2440_UCON_FCLK (3<<10) -#define S3C2443_UCON_EPLL (3<<10) - -#define S3C6400_UCON_CLKMASK (3<<10) -#define S3C6400_UCON_CLKSHIFT (10) -#define S3C6400_UCON_PCLK (0<<10) -#define S3C6400_UCON_PCLK2 (2<<10) -#define S3C6400_UCON_UCLK0 (1<<10) -#define S3C6400_UCON_UCLK1 (3<<10) - -#define S3C2440_UCON2_FCLK_EN (1<<15) -#define S3C2440_UCON0_DIVMASK (15 << 12) -#define S3C2440_UCON1_DIVMASK (15 << 12) -#define S3C2440_UCON2_DIVMASK (7 << 12) -#define S3C2440_UCON_DIVSHIFT (12) - -#define S3C2412_UCON_CLKMASK (3<<10) -#define S3C2412_UCON_CLKSHIFT (10) -#define S3C2412_UCON_UCLK (1<<10) -#define S3C2412_UCON_USYSCLK (3<<10) -#define S3C2412_UCON_PCLK (0<<10) -#define S3C2412_UCON_PCLK2 (2<<10) - -#define S3C2410_UCON_CLKMASK (1 << 10) -#define S3C2410_UCON_CLKSHIFT (10) -#define S3C2410_UCON_UCLK (1<<10) -#define S3C2410_UCON_SBREAK (1<<4) - -#define S3C2410_UCON_TXILEVEL (1<<9) -#define S3C2410_UCON_RXILEVEL (1<<8) -#define S3C2410_UCON_TXIRQMODE (1<<2) -#define S3C2410_UCON_RXIRQMODE (1<<0) -#define S3C2410_UCON_RXFIFO_TOI (1<<7) -#define S3C2443_UCON_RXERR_IRQEN (1<<6) -#define S3C2443_UCON_LOOPBACK (1<<5) - -#define S3C2410_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ - S3C2410_UCON_RXILEVEL | \ - S3C2410_UCON_TXIRQMODE | \ - S3C2410_UCON_RXIRQMODE | \ - S3C2410_UCON_RXFIFO_TOI) - -#define S3C2410_UFCON_FIFOMODE (1<<0) -#define S3C2410_UFCON_TXTRIG0 (0<<6) -#define S3C2410_UFCON_RXTRIG8 (1<<4) -#define S3C2410_UFCON_RXTRIG12 (2<<4) - -/* S3C2440 FIFO trigger levels */ -#define S3C2440_UFCON_RXTRIG1 (0<<4) -#define S3C2440_UFCON_RXTRIG8 (1<<4) -#define S3C2440_UFCON_RXTRIG16 (2<<4) -#define S3C2440_UFCON_RXTRIG32 (3<<4) - -#define S3C2440_UFCON_TXTRIG0 (0<<6) -#define S3C2440_UFCON_TXTRIG16 (1<<6) -#define S3C2440_UFCON_TXTRIG32 (2<<6) -#define S3C2440_UFCON_TXTRIG48 (3<<6) - -#define S3C2410_UFCON_RESETBOTH (3<<1) -#define S3C2410_UFCON_RESETTX (1<<2) -#define S3C2410_UFCON_RESETRX (1<<1) - -#define S3C2410_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ - S3C2410_UFCON_TXTRIG0 | \ - S3C2410_UFCON_RXTRIG8 ) - -#define S3C2410_UMCOM_AFC (1<<4) -#define S3C2410_UMCOM_RTS_LOW (1<<0) - -#define S3C2412_UMCON_AFC_63 (0<<5) /* same as s3c2443 */ -#define S3C2412_UMCON_AFC_56 (1<<5) -#define S3C2412_UMCON_AFC_48 (2<<5) -#define S3C2412_UMCON_AFC_40 (3<<5) -#define S3C2412_UMCON_AFC_32 (4<<5) -#define S3C2412_UMCON_AFC_24 (5<<5) -#define S3C2412_UMCON_AFC_16 (6<<5) -#define S3C2412_UMCON_AFC_8 (7<<5) - -#define S3C2410_UFSTAT_TXFULL (1<<9) -#define S3C2410_UFSTAT_RXFULL (1<<8) -#define S3C2410_UFSTAT_TXMASK (15<<4) -#define S3C2410_UFSTAT_TXSHIFT (4) -#define S3C2410_UFSTAT_RXMASK (15<<0) -#define S3C2410_UFSTAT_RXSHIFT (0) - -/* UFSTAT S3C2443 same as S3C2440 */ -#define S3C2440_UFSTAT_TXFULL (1<<14) -#define S3C2440_UFSTAT_RXFULL (1<<6) -#define S3C2440_UFSTAT_TXSHIFT (8) -#define S3C2440_UFSTAT_RXSHIFT (0) -#define S3C2440_UFSTAT_TXMASK (63<<8) -#define S3C2440_UFSTAT_RXMASK (63) - -#define S3C2410_UTRSTAT_TXE (1<<2) -#define S3C2410_UTRSTAT_TXFE (1<<1) -#define S3C2410_UTRSTAT_RXDR (1<<0) - -#define S3C2410_UERSTAT_OVERRUN (1<<0) -#define S3C2410_UERSTAT_FRAME (1<<2) -#define S3C2410_UERSTAT_BREAK (1<<3) -#define S3C2443_UERSTAT_PARITY (1<<1) - -#define S3C2410_UERSTAT_ANY (S3C2410_UERSTAT_OVERRUN | \ - S3C2410_UERSTAT_FRAME | \ - S3C2410_UERSTAT_BREAK) - -#define S3C2410_UMSTAT_CTS (1<<0) -#define S3C2410_UMSTAT_DeltaCTS (1<<2) - -#define S3C2443_DIVSLOT (0x2C) - -/* S3C64XX interrupt registers. */ -#define S3C64XX_UINTP 0x30 -#define S3C64XX_UINTSP 0x34 -#define S3C64XX_UINTM 0x38 - -#define S3C64XX_UINTM_RXD (0) -#define S3C64XX_UINTM_TXD (2) -#define S3C64XX_UINTM_RXD_MSK (1 << S3C64XX_UINTM_RXD) -#define S3C64XX_UINTM_TXD_MSK (1 << S3C64XX_UINTM_TXD) - -/* Following are specific to S5PV210 */ -#define S5PV210_UCON_CLKMASK (1<<10) -#define S5PV210_UCON_CLKSHIFT (10) -#define S5PV210_UCON_PCLK (0<<10) -#define S5PV210_UCON_UCLK (1<<10) - -#define S5PV210_UFCON_TXTRIG0 (0<<8) -#define S5PV210_UFCON_TXTRIG4 (1<<8) -#define S5PV210_UFCON_TXTRIG8 (2<<8) -#define S5PV210_UFCON_TXTRIG16 (3<<8) -#define S5PV210_UFCON_TXTRIG32 (4<<8) -#define S5PV210_UFCON_TXTRIG64 (5<<8) -#define S5PV210_UFCON_TXTRIG128 (6<<8) -#define S5PV210_UFCON_TXTRIG256 (7<<8) - -#define S5PV210_UFCON_RXTRIG1 (0<<4) -#define S5PV210_UFCON_RXTRIG4 (1<<4) -#define S5PV210_UFCON_RXTRIG8 (2<<4) -#define S5PV210_UFCON_RXTRIG16 (3<<4) -#define S5PV210_UFCON_RXTRIG32 (4<<4) -#define S5PV210_UFCON_RXTRIG64 (5<<4) -#define S5PV210_UFCON_RXTRIG128 (6<<4) -#define S5PV210_UFCON_RXTRIG256 (7<<4) - -#define S5PV210_UFSTAT_TXFULL (1<<24) -#define S5PV210_UFSTAT_RXFULL (1<<8) -#define S5PV210_UFSTAT_TXMASK (255<<16) -#define S5PV210_UFSTAT_TXSHIFT (16) -#define S5PV210_UFSTAT_RXMASK (255<<0) -#define S5PV210_UFSTAT_RXSHIFT (0) - -#define S3C2410_UCON_CLKSEL0 (1 << 0) -#define S3C2410_UCON_CLKSEL1 (1 << 1) -#define S3C2410_UCON_CLKSEL2 (1 << 2) -#define S3C2410_UCON_CLKSEL3 (1 << 3) - -/* Default values for s5pv210 UCON and UFCON uart registers */ -#define S5PV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ - S3C2410_UCON_RXILEVEL | \ - S3C2410_UCON_TXIRQMODE | \ - S3C2410_UCON_RXIRQMODE | \ - S3C2410_UCON_RXFIFO_TOI | \ - S3C2443_UCON_RXERR_IRQEN) - -#define S5PV210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ - S5PV210_UFCON_TXTRIG4 | \ - S5PV210_UFCON_RXTRIG4) - -#ifndef __ASSEMBLY__ - -/* configuration structure for per-machine configurations for the - * serial port - * - * the pointer is setup by the machine specific initialisation from the - * arch/arm/mach-s3c2410/ directory. -*/ - -struct s3c2410_uartcfg { - unsigned char hwport; /* hardware port number */ - unsigned char unused; - unsigned short flags; - upf_t uart_flags; /* default uart flags */ - unsigned int clk_sel; - - unsigned int has_fracval; - - unsigned long ucon; /* value of ucon for port */ - unsigned long ulcon; /* value of ulcon for port */ - unsigned long ufcon; /* value of ufcon for port */ -}; - -/* s3c24xx_uart_devs - * - * this is exported from the core as we cannot use driver_register(), - * or platform_add_device() before the console_initcall() -*/ - -extern struct platform_device *s3c24xx_uart_devs[4]; - -#endif /* __ASSEMBLY__ */ - -#endif /* __ASM_ARM_REGS_SERIAL_H */ - +#include <linux/serial_s3c.h> diff --git a/arch/arm/plat-samsung/include/plat/rtc-core.h b/arch/arm/plat-samsung/include/plat/rtc-core.h index 21d8594d37ca..7b542f7b7938 100644 --- a/arch/arm/plat-samsung/include/plat/rtc-core.h +++ b/arch/arm/plat-samsung/include/plat/rtc-core.h @@ -19,7 +19,7 @@ /* re-define device name depending on support. */ static inline void s3c_rtc_setname(char *name) { -#if defined(CONFIG_SAMSUNG_DEV_RTC) || defined(CONFIG_PLAT_S3C24XX) +#if defined(CONFIG_S3C_DEV_RTC) || defined(CONFIG_PLAT_S3C24XX) s3c_device_rtc.name = name; #endif } diff --git a/arch/arm/plat-samsung/include/plat/s3c2410.h b/arch/arm/plat-samsung/include/plat/s3c2410.h deleted file mode 100644 index 55b0e5f51e97..000000000000 --- a/arch/arm/plat-samsung/include/plat/s3c2410.h +++ /dev/null @@ -1,31 +0,0 @@ -/* linux/arch/arm/plat-samsung/include/plat/s3c2410.h - * - * Copyright (c) 2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Header file for s3c2410 machine directory - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - -#ifdef CONFIG_CPU_S3C2410 - -extern int s3c2410_init(void); -extern int s3c2410a_init(void); - -extern void s3c2410_map_io(void); - -extern void s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no); - -extern void s3c2410_init_clocks(int xtal); - -#else -#define s3c2410_init_clocks NULL -#define s3c2410_init_uarts NULL -#define s3c2410_map_io NULL -#define s3c2410_init NULL -#define s3c2410a_init NULL -#endif diff --git a/arch/arm/plat-samsung/include/plat/s3c2412.h b/arch/arm/plat-samsung/include/plat/s3c2412.h deleted file mode 100644 index cbae50ddacc8..000000000000 --- a/arch/arm/plat-samsung/include/plat/s3c2412.h +++ /dev/null @@ -1,32 +0,0 @@ -/* linux/arch/arm/plat-samsung/include/plat/s3c2412.h - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Header file for s3c2412 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifdef CONFIG_CPU_S3C2412 - -extern int s3c2412_init(void); - -extern void s3c2412_map_io(void); - -extern void s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no); - -extern void s3c2412_init_clocks(int xtal); - -extern int s3c2412_baseclk_add(void); - -extern void s3c2412_restart(char mode, const char *cmd); -#else -#define s3c2412_init_clocks NULL -#define s3c2412_init_uarts NULL -#define s3c2412_map_io NULL -#define s3c2412_init NULL -#define s3c2412_restart NULL -#endif diff --git a/arch/arm/plat-samsung/include/plat/s3c2416.h b/arch/arm/plat-samsung/include/plat/s3c2416.h deleted file mode 100644 index f27399a3c68d..000000000000 --- a/arch/arm/plat-samsung/include/plat/s3c2416.h +++ /dev/null @@ -1,37 +0,0 @@ -/* linux/arch/arm/plat-samsung/include/plat/s3c2416.h - * - * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com> - * - * Header file for s3c2416 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifdef CONFIG_CPU_S3C2416 - -struct s3c2410_uartcfg; - -extern int s3c2416_init(void); - -extern void s3c2416_map_io(void); - -extern void s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no); - -extern void s3c2416_init_clocks(int xtal); - -extern int s3c2416_baseclk_add(void); - -extern void s3c2416_restart(char mode, const char *cmd); - -extern void s3c2416_init_irq(void); -extern struct syscore_ops s3c2416_irq_syscore_ops; - -#else -#define s3c2416_init_clocks NULL -#define s3c2416_init_uarts NULL -#define s3c2416_map_io NULL -#define s3c2416_init NULL -#define s3c2416_restart NULL -#endif diff --git a/arch/arm/plat-samsung/include/plat/s3c2443.h b/arch/arm/plat-samsung/include/plat/s3c2443.h deleted file mode 100644 index 71b88ec48956..000000000000 --- a/arch/arm/plat-samsung/include/plat/s3c2443.h +++ /dev/null @@ -1,36 +0,0 @@ -/* linux/arch/arm/plat-samsung/include/plat/s3c2443.h - * - * Copyright (c) 2004-2005 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Header file for s3c2443 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifdef CONFIG_CPU_S3C2443 - -struct s3c2410_uartcfg; - -extern int s3c2443_init(void); - -extern void s3c2443_map_io(void); - -extern void s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no); - -extern void s3c2443_init_clocks(int xtal); - -extern int s3c2443_baseclk_add(void); - -extern void s3c2443_restart(char mode, const char *cmd); - -extern void s3c2443_init_irq(void); -#else -#define s3c2443_init_clocks NULL -#define s3c2443_init_uarts NULL -#define s3c2443_map_io NULL -#define s3c2443_init NULL -#define s3c2443_restart NULL -#endif diff --git a/arch/arm/plat-samsung/include/plat/s3c244x.h b/arch/arm/plat-samsung/include/plat/s3c244x.h deleted file mode 100644 index ea0c961b7603..000000000000 --- a/arch/arm/plat-samsung/include/plat/s3c244x.h +++ /dev/null @@ -1,42 +0,0 @@ -/* linux/arch/arm/plat-samsung/include/plat/s3c244x.h - * - * Copyright (c) 2004-2005 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Header file for S3C2440 and S3C2442 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442) - -extern void s3c244x_map_io(void); - -extern void s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no); - -extern void s3c244x_init_clocks(int xtal); - -#else -#define s3c244x_init_clocks NULL -#define s3c244x_init_uarts NULL -#endif - -#ifdef CONFIG_CPU_S3C2440 -extern int s3c2440_init(void); - -extern void s3c2440_map_io(void); -#else -#define s3c2440_init NULL -#define s3c2440_map_io NULL -#endif - -#ifdef CONFIG_CPU_S3C2442 -extern int s3c2442_init(void); - -extern void s3c2442_map_io(void); -#else -#define s3c2442_init NULL -#define s3c2442_map_io NULL -#endif diff --git a/arch/arm/plat-samsung/include/plat/s5p-time.h b/arch/arm/plat-samsung/include/plat/s5p-time.h deleted file mode 100644 index 9c96f3586ce0..000000000000 --- a/arch/arm/plat-samsung/include/plat/s5p-time.h +++ /dev/null @@ -1,40 +0,0 @@ -/* linux/arch/arm/plat-samsung/include/plat/s5p-time.h - * - * Copyright 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Header file for s5p time support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_PLAT_S5P_TIME_H -#define __ASM_PLAT_S5P_TIME_H __FILE__ - -/* S5P HR-Timer Clock mode */ -enum s5p_timer_mode { - S5P_PWM0, - S5P_PWM1, - S5P_PWM2, - S5P_PWM3, - S5P_PWM4, -}; - -struct s5p_timer_source { - unsigned int event_id; - unsigned int source_id; -}; - -/* Be able to sleep for atleast 4 seconds (usually more) */ -#define S5PTIMER_MIN_RANGE 4 - -#define TCNT_MAX 0xffffffff -#define NON_PERIODIC 0 -#define PERIODIC 1 - -extern void __init s5p_set_timer_source(enum s5p_timer_mode event, - enum s5p_timer_mode source); -extern void s5p_timer_init(void); -#endif /* __ASM_PLAT_S5P_TIME_H */ diff --git a/arch/arm/plat-samsung/include/plat/samsung-time.h b/arch/arm/plat-samsung/include/plat/samsung-time.h new file mode 100644 index 000000000000..4cc99bb1f176 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/samsung-time.h @@ -0,0 +1,53 @@ +/* linux/arch/arm/plat-samsung/include/plat/samsung-time.h + * + * Copyright 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Header file for samsung s3c and s5p time support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_PLAT_SAMSUNG_TIME_H +#define __ASM_PLAT_SAMSUNG_TIME_H __FILE__ + +/* SAMSUNG HR-Timer Clock mode */ +enum samsung_timer_mode { + SAMSUNG_PWM0, + SAMSUNG_PWM1, + SAMSUNG_PWM2, + SAMSUNG_PWM3, + SAMSUNG_PWM4, +}; + +struct samsung_timer_source { + unsigned int event_id; + unsigned int source_id; +}; + +/* Be able to sleep for atleast 4 seconds (usually more) */ +#define SAMSUNG_TIMER_MIN_RANGE 4 + +#if defined(CONFIG_ARCH_S3C24XX) || defined(CONFIG_ARCH_S5PC100) +#define TCNT_MAX 0xffff +#define TSCALER_DIV 25 +#define TDIV 50 +#define TSIZE 16 +#else +#define TCNT_MAX 0xffffffff +#define TSCALER_DIV 2 +#define TDIV 2 +#define TSIZE 32 +#endif + +#define NON_PERIODIC 0 +#define PERIODIC 1 + +extern void __init samsung_set_timer_source(enum samsung_timer_mode event, + enum samsung_timer_mode source); + +extern void __init samsung_timer_init(void); + +#endif /* __ASM_PLAT_SAMSUNG_TIME_H */ diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h index 9b87f38fc4f4..ce1d0f785efd 100644 --- a/arch/arm/plat-samsung/include/plat/sdhci.h +++ b/arch/arm/plat-samsung/include/plat/sdhci.h @@ -18,62 +18,9 @@ #ifndef __PLAT_S3C_SDHCI_H #define __PLAT_S3C_SDHCI_H __FILE__ +#include <linux/platform_data/mmc-sdhci-s3c.h> #include <plat/devs.h> -struct platform_device; -struct mmc_host; -struct mmc_card; -struct mmc_ios; - -enum cd_types { - S3C_SDHCI_CD_INTERNAL, /* use mmc internal CD line */ - S3C_SDHCI_CD_EXTERNAL, /* use external callback */ - S3C_SDHCI_CD_GPIO, /* use external gpio pin for CD line */ - S3C_SDHCI_CD_NONE, /* no CD line, use polling to detect card */ - S3C_SDHCI_CD_PERMANENT, /* no CD line, card permanently wired to host */ -}; - -/** - * struct s3c_sdhci_platdata() - Platform device data for Samsung SDHCI - * @max_width: The maximum number of data bits supported. - * @host_caps: Standard MMC host capabilities bit field. - * @host_caps2: The second standard MMC host capabilities bit field. - * @cd_type: Type of Card Detection method (see cd_types enum above) - * @ext_cd_init: Initialize external card detect subsystem. Called on - * sdhci-s3c driver probe when cd_type == S3C_SDHCI_CD_EXTERNAL. - * notify_func argument is a callback to the sdhci-s3c driver - * that triggers the card detection event. Callback arguments: - * dev is pointer to platform device of the host controller, - * state is new state of the card (0 - removed, 1 - inserted). - * @ext_cd_cleanup: Cleanup external card detect subsystem. Called on - * sdhci-s3c driver remove when cd_type == S3C_SDHCI_CD_EXTERNAL. - * notify_func argument is the same callback as for ext_cd_init. - * @ext_cd_gpio: gpio pin used for external CD line, valid only if - * cd_type == S3C_SDHCI_CD_GPIO - * @ext_cd_gpio_invert: invert values for external CD gpio line - * @cfg_gpio: Configure the GPIO for a specific card bit-width - * - * Initialisation data specific to either the machine or the platform - * for the device driver to use or call-back when configuring gpio or - * card speed information. -*/ -struct s3c_sdhci_platdata { - unsigned int max_width; - unsigned int host_caps; - unsigned int host_caps2; - unsigned int pm_caps; - enum cd_types cd_type; - - int ext_cd_gpio; - bool ext_cd_gpio_invert; - int (*ext_cd_init)(void (*notify_func)(struct platform_device *, - int state)); - int (*ext_cd_cleanup)(void (*notify_func)(struct platform_device *, - int state)); - - void (*cfg_gpio)(struct platform_device *dev, int width); -}; - /* s3c_sdhci_set_platdata() - common helper for setting SDHCI platform data * @pd: The default platform data for this device. * @set: Pointer to the platform data to fill in. @@ -206,7 +153,7 @@ static inline void s3c6400_default_sdhci2(void) { } /* S5P64X0 SDHCI setup */ -#ifdef CONFIG_S5P64X0_SETUP_SDHCI +#ifdef CONFIG_S5P64X0_SETUP_SDHCI_GPIO static inline void s5p64x0_default_sdhci0(void) { #ifdef CONFIG_S3C_DEV_HSMMC @@ -241,7 +188,7 @@ static inline void s5p64x0_default_sdhci1(void) { } static inline void s5p6440_default_sdhci2(void) { } static inline void s5p6450_default_sdhci2(void) { } -#endif /* CONFIG_S5P64X0_SETUP_SDHCI */ +#endif /* CONFIG_S5P64X0_SETUP_SDHCI_GPIO */ /* S5PC100 SDHCI setup */ @@ -378,5 +325,4 @@ static inline void s3c_sdhci_setname(int id, char *name) break; } } - #endif /* __PLAT_S3C_SDHCI_H */ diff --git a/arch/arm/plat-samsung/include/plat/usb-phy.h b/arch/arm/plat-samsung/include/plat/usb-phy.h index 959bcdb03a25..ab34dfadb7f9 100644 --- a/arch/arm/plat-samsung/include/plat/usb-phy.h +++ b/arch/arm/plat-samsung/include/plat/usb-phy.h @@ -11,10 +11,7 @@ #ifndef __PLAT_SAMSUNG_USB_PHY_H #define __PLAT_SAMSUNG_USB_PHY_H __FILE__ -enum s5p_usb_phy_type { - S5P_USB_PHY_DEVICE, - S5P_USB_PHY_HOST, -}; +#include <linux/usb/samsung_usb_phy.h> extern int s5p_usb_phy_init(struct platform_device *pdev, int type); extern int s5p_usb_phy_exit(struct platform_device *pdev, int type); diff --git a/arch/arm/plat-samsung/irq-vic-timer.c b/arch/arm/plat-samsung/irq-vic-timer.c index f980cf3d2baa..0fceb4273824 100644 --- a/arch/arm/plat-samsung/irq-vic-timer.c +++ b/arch/arm/plat-samsung/irq-vic-timer.c @@ -16,15 +16,15 @@ #include <linux/kernel.h> #include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/irqchip/chained_irq.h> #include <linux/io.h> #include <mach/map.h> +#include <mach/irqs.h> #include <plat/cpu.h> #include <plat/irq-vic-timer.h> #include <plat/regs-timer.h> -#include <asm/mach/irq.h> - static void s3c_irq_demux_vic_timer(unsigned int irq, struct irq_desc *desc) { struct irq_chip *chip = irq_get_chip(irq); diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c index 002b1472293b..53210ec4e8ec 100644 --- a/arch/arm/plat-samsung/pm.c +++ b/arch/arm/plat-samsung/pm.c @@ -27,6 +27,7 @@ #include <plat/regs-serial.h> #include <mach/regs-clock.h> #include <mach/regs-irq.h> +#include <mach/irqs.h> #include <asm/irq.h> #include <plat/pm.h> diff --git a/arch/arm/plat-samsung/s5p-dev-mfc.c b/arch/arm/plat-samsung/s5p-dev-mfc.c index 5ec104b5408b..a93fb6fb6606 100644 --- a/arch/arm/plat-samsung/s5p-dev-mfc.c +++ b/arch/arm/plat-samsung/s5p-dev-mfc.c @@ -18,10 +18,50 @@ #include <linux/of.h> #include <mach/map.h> +#include <mach/irqs.h> #include <plat/devs.h> -#include <plat/irqs.h> #include <plat/mfc.h> +static struct resource s5p_mfc_resource[] = { + [0] = DEFINE_RES_MEM(S5P_PA_MFC, SZ_64K), + [1] = DEFINE_RES_IRQ(IRQ_MFC), +}; + +struct platform_device s5p_device_mfc = { + .name = "s5p-mfc", + .id = -1, + .num_resources = ARRAY_SIZE(s5p_mfc_resource), + .resource = s5p_mfc_resource, +}; + +/* + * MFC hardware has 2 memory interfaces which are modelled as two separate + * platform devices to let dma-mapping distinguish between them. + * + * MFC parent device (s5p_device_mfc) must be registered before memory + * interface specific devices (s5p_device_mfc_l and s5p_device_mfc_r). + */ + +struct platform_device s5p_device_mfc_l = { + .name = "s5p-mfc-l", + .id = -1, + .dev = { + .parent = &s5p_device_mfc.dev, + .dma_mask = &s5p_device_mfc_l.dev.coherent_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +struct platform_device s5p_device_mfc_r = { + .name = "s5p-mfc-r", + .id = -1, + .dev = { + .parent = &s5p_device_mfc.dev, + .dma_mask = &s5p_device_mfc_r.dev.coherent_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + struct s5p_mfc_reserved_mem { phys_addr_t base; unsigned long size; diff --git a/arch/arm/plat-samsung/s5p-irq-gpioint.c b/arch/arm/plat-samsung/s5p-irq-gpioint.c index bae56131a50a..fafdb059043a 100644 --- a/arch/arm/plat-samsung/s5p-irq-gpioint.c +++ b/arch/arm/plat-samsung/s5p-irq-gpioint.c @@ -14,6 +14,7 @@ #include <linux/kernel.h> #include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/irqchip/chained_irq.h> #include <linux/io.h> #include <linux/gpio.h> #include <linux/slab.h> @@ -22,8 +23,6 @@ #include <plat/gpio-core.h> #include <plat/gpio-cfg.h> -#include <asm/mach/irq.h> - #define GPIO_BASE(chip) ((void __iomem *)((unsigned long)((chip)->base) & 0xFFFFF000u)) #define CON_OFFSET 0x700 diff --git a/arch/arm/plat-samsung/s5p-irq.c b/arch/arm/plat-samsung/s5p-irq.c index 103e371f5e35..ff1a76011b1e 100644 --- a/arch/arm/plat-samsung/s5p-irq.c +++ b/arch/arm/plat-samsung/s5p-irq.c @@ -15,6 +15,7 @@ #include <linux/io.h> #include <linux/irqchip/arm-vic.h> +#include <mach/irqs.h> #include <mach/map.h> #include <plat/regs-timer.h> #include <plat/cpu.h> diff --git a/arch/arm/plat-samsung/s5p-sleep.S b/arch/arm/plat-samsung/s5p-sleep.S index bdf6dadf8790..a030e7301da8 100644 --- a/arch/arm/plat-samsung/s5p-sleep.S +++ b/arch/arm/plat-samsung/s5p-sleep.S @@ -25,6 +25,9 @@ #include <asm/asm-offsets.h> #include <asm/hardware/cache-l2x0.h> +#define CPU_MASK 0xff0ffff0 +#define CPU_CORTEX_A9 0x410fc090 + /* * The following code is located into the .data section. This is to * allow l2x0_regs_phys to be accessed with a relative load while we @@ -51,6 +54,12 @@ ENTRY(s3c_cpu_resume) #ifdef CONFIG_CACHE_L2X0 + mrc p15, 0, r0, c0, c0, 0 + ldr r1, =CPU_MASK + and r0, r0, r1 + ldr r1, =CPU_CORTEX_A9 + cmp r0, r1 + bne resume_l2on adr r0, l2x0_regs_phys ldr r0, [r0] ldr r1, [r0, #L2X0_R_PHY_BASE] diff --git a/arch/arm/plat-samsung/s5p-time.c b/arch/arm/plat-samsung/samsung-time.c index e92510cf82ee..f899cbc9b288 100644 --- a/arch/arm/plat-samsung/s5p-time.c +++ b/arch/arm/plat-samsung/samsung-time.c @@ -2,7 +2,7 @@ * Copyright (c) 2011 Samsung Electronics Co., Ltd. * http://www.samsung.com/ * - * S5P - Common hr-timer support + * samsung - Common hr-timer support (s3c and s5p) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -25,41 +25,41 @@ #include <mach/map.h> #include <plat/devs.h> #include <plat/regs-timer.h> -#include <plat/s5p-time.h> +#include <plat/samsung-time.h> static struct clk *tin_event; static struct clk *tin_source; static struct clk *tdiv_event; static struct clk *tdiv_source; static struct clk *timerclk; -static struct s5p_timer_source timer_source; +static struct samsung_timer_source timer_source; static unsigned long clock_count_per_tick; -static void s5p_timer_resume(void); +static void samsung_timer_resume(void); -static void s5p_time_stop(enum s5p_timer_mode mode) +static void samsung_time_stop(enum samsung_timer_mode mode) { unsigned long tcon; tcon = __raw_readl(S3C2410_TCON); switch (mode) { - case S5P_PWM0: + case SAMSUNG_PWM0: tcon &= ~S3C2410_TCON_T0START; break; - case S5P_PWM1: + case SAMSUNG_PWM1: tcon &= ~S3C2410_TCON_T1START; break; - case S5P_PWM2: + case SAMSUNG_PWM2: tcon &= ~S3C2410_TCON_T2START; break; - case S5P_PWM3: + case SAMSUNG_PWM3: tcon &= ~S3C2410_TCON_T3START; break; - case S5P_PWM4: + case SAMSUNG_PWM4: tcon &= ~S3C2410_TCON_T4START; break; @@ -70,7 +70,7 @@ static void s5p_time_stop(enum s5p_timer_mode mode) __raw_writel(tcon, S3C2410_TCON); } -static void s5p_time_setup(enum s5p_timer_mode mode, unsigned long tcnt) +static void samsung_time_setup(enum samsung_timer_mode mode, unsigned long tcnt) { unsigned long tcon; @@ -79,27 +79,27 @@ static void s5p_time_setup(enum s5p_timer_mode mode, unsigned long tcnt) tcnt--; switch (mode) { - case S5P_PWM0: + case SAMSUNG_PWM0: tcon &= ~(0x0f << 0); tcon |= S3C2410_TCON_T0MANUALUPD; break; - case S5P_PWM1: + case SAMSUNG_PWM1: tcon &= ~(0x0f << 8); tcon |= S3C2410_TCON_T1MANUALUPD; break; - case S5P_PWM2: + case SAMSUNG_PWM2: tcon &= ~(0x0f << 12); tcon |= S3C2410_TCON_T2MANUALUPD; break; - case S5P_PWM3: + case SAMSUNG_PWM3: tcon &= ~(0x0f << 16); tcon |= S3C2410_TCON_T3MANUALUPD; break; - case S5P_PWM4: + case SAMSUNG_PWM4: tcon &= ~(0x07 << 20); tcon |= S3C2410_TCON_T4MANUALUPD; break; @@ -114,14 +114,14 @@ static void s5p_time_setup(enum s5p_timer_mode mode, unsigned long tcnt) __raw_writel(tcon, S3C2410_TCON); } -static void s5p_time_start(enum s5p_timer_mode mode, bool periodic) +static void samsung_time_start(enum samsung_timer_mode mode, bool periodic) { unsigned long tcon; tcon = __raw_readl(S3C2410_TCON); switch (mode) { - case S5P_PWM0: + case SAMSUNG_PWM0: tcon |= S3C2410_TCON_T0START; tcon &= ~S3C2410_TCON_T0MANUALUPD; @@ -131,7 +131,7 @@ static void s5p_time_start(enum s5p_timer_mode mode, bool periodic) tcon &= ~S3C2410_TCON_T0RELOAD; break; - case S5P_PWM1: + case SAMSUNG_PWM1: tcon |= S3C2410_TCON_T1START; tcon &= ~S3C2410_TCON_T1MANUALUPD; @@ -141,7 +141,7 @@ static void s5p_time_start(enum s5p_timer_mode mode, bool periodic) tcon &= ~S3C2410_TCON_T1RELOAD; break; - case S5P_PWM2: + case SAMSUNG_PWM2: tcon |= S3C2410_TCON_T2START; tcon &= ~S3C2410_TCON_T2MANUALUPD; @@ -151,7 +151,7 @@ static void s5p_time_start(enum s5p_timer_mode mode, bool periodic) tcon &= ~S3C2410_TCON_T2RELOAD; break; - case S5P_PWM3: + case SAMSUNG_PWM3: tcon |= S3C2410_TCON_T3START; tcon &= ~S3C2410_TCON_T3MANUALUPD; @@ -161,7 +161,7 @@ static void s5p_time_start(enum s5p_timer_mode mode, bool periodic) tcon &= ~S3C2410_TCON_T3RELOAD; break; - case S5P_PWM4: + case SAMSUNG_PWM4: tcon |= S3C2410_TCON_T4START; tcon &= ~S3C2410_TCON_T4MANUALUPD; @@ -178,24 +178,24 @@ static void s5p_time_start(enum s5p_timer_mode mode, bool periodic) __raw_writel(tcon, S3C2410_TCON); } -static int s5p_set_next_event(unsigned long cycles, +static int samsung_set_next_event(unsigned long cycles, struct clock_event_device *evt) { - s5p_time_setup(timer_source.event_id, cycles); - s5p_time_start(timer_source.event_id, NON_PERIODIC); + samsung_time_setup(timer_source.event_id, cycles); + samsung_time_start(timer_source.event_id, NON_PERIODIC); return 0; } -static void s5p_set_mode(enum clock_event_mode mode, +static void samsung_set_mode(enum clock_event_mode mode, struct clock_event_device *evt) { - s5p_time_stop(timer_source.event_id); + samsung_time_stop(timer_source.event_id); switch (mode) { case CLOCK_EVT_MODE_PERIODIC: - s5p_time_setup(timer_source.event_id, clock_count_per_tick); - s5p_time_start(timer_source.event_id, PERIODIC); + samsung_time_setup(timer_source.event_id, clock_count_per_tick); + samsung_time_start(timer_source.event_id, PERIODIC); break; case CLOCK_EVT_MODE_ONESHOT: @@ -206,24 +206,24 @@ static void s5p_set_mode(enum clock_event_mode mode, break; case CLOCK_EVT_MODE_RESUME: - s5p_timer_resume(); + samsung_timer_resume(); break; } } -static void s5p_timer_resume(void) +static void samsung_timer_resume(void) { /* event timer restart */ - s5p_time_setup(timer_source.event_id, clock_count_per_tick); - s5p_time_start(timer_source.event_id, PERIODIC); + samsung_time_setup(timer_source.event_id, clock_count_per_tick); + samsung_time_start(timer_source.event_id, PERIODIC); /* source timer restart */ - s5p_time_setup(timer_source.source_id, TCNT_MAX); - s5p_time_start(timer_source.source_id, PERIODIC); + samsung_time_setup(timer_source.source_id, TCNT_MAX); + samsung_time_start(timer_source.source_id, PERIODIC); } -void __init s5p_set_timer_source(enum s5p_timer_mode event, - enum s5p_timer_mode source) +void __init samsung_set_timer_source(enum samsung_timer_mode event, + enum samsung_timer_mode source) { s3c_device_timer[event].dev.bus = &platform_bus_type; s3c_device_timer[source].dev.bus = &platform_bus_type; @@ -233,14 +233,14 @@ void __init s5p_set_timer_source(enum s5p_timer_mode event, } static struct clock_event_device time_event_device = { - .name = "s5p_event_timer", + .name = "samsung_event_timer", .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, .rating = 200, - .set_next_event = s5p_set_next_event, - .set_mode = s5p_set_mode, + .set_next_event = samsung_set_next_event, + .set_mode = samsung_set_mode, }; -static irqreturn_t s5p_clock_event_isr(int irq, void *dev_id) +static irqreturn_t samsung_clock_event_isr(int irq, void *dev_id) { struct clock_event_device *evt = dev_id; @@ -249,14 +249,14 @@ static irqreturn_t s5p_clock_event_isr(int irq, void *dev_id) return IRQ_HANDLED; } -static struct irqaction s5p_clock_event_irq = { - .name = "s5p_time_irq", +static struct irqaction samsung_clock_event_irq = { + .name = "samsung_time_irq", .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = s5p_clock_event_isr, + .handler = samsung_clock_event_isr, .dev_id = &time_event_device, }; -static void __init s5p_clockevent_init(void) +static void __init samsung_clockevent_init(void) { unsigned long pclk; unsigned long clock_rate; @@ -267,8 +267,8 @@ static void __init s5p_clockevent_init(void) tscaler = clk_get_parent(tdiv_event); - clk_set_rate(tscaler, pclk / 2); - clk_set_rate(tdiv_event, pclk / 2); + clk_set_rate(tscaler, pclk / TSCALER_DIV); + clk_set_rate(tdiv_event, pclk / TDIV); clk_set_parent(tin_event, tdiv_event); clock_rate = clk_get_rate(tin_event); @@ -278,22 +278,22 @@ static void __init s5p_clockevent_init(void) clockevents_config_and_register(&time_event_device, clock_rate, 1, -1); irq_number = timer_source.event_id + IRQ_TIMER0; - setup_irq(irq_number, &s5p_clock_event_irq); + setup_irq(irq_number, &samsung_clock_event_irq); } -static void __iomem *s5p_timer_reg(void) +static void __iomem *samsung_timer_reg(void) { unsigned long offset = 0; switch (timer_source.source_id) { - case S5P_PWM0: - case S5P_PWM1: - case S5P_PWM2: - case S5P_PWM3: + case SAMSUNG_PWM0: + case SAMSUNG_PWM1: + case SAMSUNG_PWM2: + case SAMSUNG_PWM3: offset = (timer_source.source_id * 0x0c) + 0x14; break; - case S5P_PWM4: + case SAMSUNG_PWM4: offset = 0x40; break; @@ -312,9 +312,9 @@ static void __iomem *s5p_timer_reg(void) * this wraps around for now, since it is just a relative time * stamp. (Inspired by U300 implementation.) */ -static u32 notrace s5p_read_sched_clock(void) +static u32 notrace samsung_read_sched_clock(void) { - void __iomem *reg = s5p_timer_reg(); + void __iomem *reg = samsung_timer_reg(); if (!reg) return 0; @@ -322,29 +322,29 @@ static u32 notrace s5p_read_sched_clock(void) return ~__raw_readl(reg); } -static void __init s5p_clocksource_init(void) +static void __init samsung_clocksource_init(void) { unsigned long pclk; unsigned long clock_rate; pclk = clk_get_rate(timerclk); - clk_set_rate(tdiv_source, pclk / 2); + clk_set_rate(tdiv_source, pclk / TDIV); clk_set_parent(tin_source, tdiv_source); clock_rate = clk_get_rate(tin_source); - s5p_time_setup(timer_source.source_id, TCNT_MAX); - s5p_time_start(timer_source.source_id, PERIODIC); + samsung_time_setup(timer_source.source_id, TCNT_MAX); + samsung_time_start(timer_source.source_id, PERIODIC); - setup_sched_clock(s5p_read_sched_clock, 32, clock_rate); + setup_sched_clock(samsung_read_sched_clock, TSIZE, clock_rate); - if (clocksource_mmio_init(s5p_timer_reg(), "s5p_clocksource_timer", - clock_rate, 250, 32, clocksource_mmio_readl_down)) - panic("s5p_clocksource_timer: can't register clocksource\n"); + if (clocksource_mmio_init(samsung_timer_reg(), "samsung_clocksource_timer", + clock_rate, 250, TSIZE, clocksource_mmio_readl_down)) + panic("samsung_clocksource_timer: can't register clocksource\n"); } -static void __init s5p_timer_resources(void) +static void __init samsung_timer_resources(void) { unsigned long event_id = timer_source.event_id; @@ -386,9 +386,9 @@ static void __init s5p_timer_resources(void) clk_enable(tin_source); } -void __init s5p_timer_init(void) +void __init samsung_timer_init(void) { - s5p_timer_resources(); - s5p_clockevent_init(); - s5p_clocksource_init(); + samsung_timer_resources(); + samsung_clockevent_init(); + samsung_clocksource_init(); } diff --git a/arch/arm/plat-samsung/setup-mipiphy.c b/arch/arm/plat-samsung/setup-mipiphy.c index 147459327601..66df315990a7 100644 --- a/arch/arm/plat-samsung/setup-mipiphy.c +++ b/arch/arm/plat-samsung/setup-mipiphy.c @@ -8,6 +8,7 @@ * published by the Free Software Foundation. */ +#include <linux/export.h> #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/io.h> @@ -50,8 +51,10 @@ int s5p_csis_phy_enable(int id, bool on) { return __s5p_mipi_phy_control(id, on, S5P_MIPI_DPHY_SRESETN); } +EXPORT_SYMBOL(s5p_csis_phy_enable); int s5p_dsim_phy_enable(struct platform_device *pdev, bool on) { return __s5p_mipi_phy_control(pdev->id, on, S5P_MIPI_DPHY_MRESETN); } +EXPORT_SYMBOL(s5p_dsim_phy_enable); diff --git a/arch/arm/plat-samsung/time.c b/arch/arm/plat-samsung/time.c deleted file mode 100644 index 73defd00c3e4..000000000000 --- a/arch/arm/plat-samsung/time.c +++ /dev/null @@ -1,287 +0,0 @@ -/* linux/arch/arm/plat-samsung/time.c - * - * Copyright (C) 2003-2005 Simtec Electronics - * Ben Dooks, <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/platform_device.h> -#include <linux/syscore_ops.h> - -#include <asm/mach-types.h> - -#include <asm/irq.h> -#include <mach/map.h> -#include <plat/regs-timer.h> -#include <mach/regs-irq.h> -#include <asm/mach/time.h> -#include <mach/tick.h> - -#include <plat/clock.h> -#include <plat/cpu.h> - -static unsigned long timer_startval; -static unsigned long timer_usec_ticks; - -#ifndef TICK_MAX -#define TICK_MAX (0xffff) -#endif - -#define TIMER_USEC_SHIFT 16 - -/* we use the shifted arithmetic to work out the ratio of timer ticks - * to usecs, as often the peripheral clock is not a nice even multiple - * of 1MHz. - * - * shift of 14 and 15 are too low for the 12MHz, 16 seems to be ok - * for the current HZ value of 200 without producing overflows. - * - * Original patch by Dimitry Andric, updated by Ben Dooks -*/ - - -/* timer_mask_usec_ticks - * - * given a clock and divisor, make the value to pass into timer_ticks_to_usec - * to scale the ticks into usecs -*/ - -static inline unsigned long -timer_mask_usec_ticks(unsigned long scaler, unsigned long pclk) -{ - unsigned long den = pclk / 1000; - - return ((1000 << TIMER_USEC_SHIFT) * scaler + (den >> 1)) / den; -} - -/* timer_ticks_to_usec - * - * convert timer ticks to usec. -*/ - -static inline unsigned long timer_ticks_to_usec(unsigned long ticks) -{ - unsigned long res; - - res = ticks * timer_usec_ticks; - res += 1 << (TIMER_USEC_SHIFT - 4); /* round up slightly */ - - return res >> TIMER_USEC_SHIFT; -} - -/*** - * Returns microsecond since last clock interrupt. Note that interrupts - * will have been disabled by do_gettimeoffset() - * IRQs are disabled before entering here from do_gettimeofday() - */ - -static u32 s3c2410_gettimeoffset(void) -{ - unsigned long tdone; - unsigned long tval; - - /* work out how many ticks have gone since last timer interrupt */ - - tval = __raw_readl(S3C2410_TCNTO(4)); - tdone = timer_startval - tval; - - /* check to see if there is an interrupt pending */ - - if (s3c24xx_ostimer_pending()) { - /* re-read the timer, and try and fix up for the missed - * interrupt. Note, the interrupt may go off before the - * timer has re-loaded from wrapping. - */ - - tval = __raw_readl(S3C2410_TCNTO(4)); - tdone = timer_startval - tval; - - if (tval != 0) - tdone += timer_startval; - } - - return timer_ticks_to_usec(tdone) * 1000; -} - - -/* - * IRQ handler for the timer - */ -static irqreturn_t -s3c2410_timer_interrupt(int irq, void *dev_id) -{ - timer_tick(); - return IRQ_HANDLED; -} - -static struct irqaction s3c2410_timer_irq = { - .name = "S3C2410 Timer Tick", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = s3c2410_timer_interrupt, -}; - -#define use_tclk1_12() ( \ - machine_is_bast() || \ - machine_is_vr1000() || \ - machine_is_anubis() || \ - machine_is_osiris()) - -static struct clk *tin; -static struct clk *tdiv; -static struct clk *timerclk; - -/* - * Set up timer interrupt, and return the current time in seconds. - * - * Currently we only use timer4, as it is the only timer which has no - * other function that can be exploited externally - */ -static void s3c2410_timer_setup (void) -{ - unsigned long tcon; - unsigned long tcnt; - unsigned long tcfg1; - unsigned long tcfg0; - - tcnt = TICK_MAX; /* default value for tcnt */ - - /* configure the system for whichever machine is in use */ - - if (use_tclk1_12()) { - /* timer is at 12MHz, scaler is 1 */ - timer_usec_ticks = timer_mask_usec_ticks(1, 12000000); - tcnt = 12000000 / HZ; - - tcfg1 = __raw_readl(S3C2410_TCFG1); - tcfg1 &= ~S3C2410_TCFG1_MUX4_MASK; - tcfg1 |= S3C2410_TCFG1_MUX4_TCLK1; - __raw_writel(tcfg1, S3C2410_TCFG1); - } else { - unsigned long pclk; - struct clk *tscaler; - - /* for the h1940 (and others), we use the pclk from the core - * to generate the timer values. since values around 50 to - * 70MHz are not values we can directly generate the timer - * value from, we need to pre-scale and divide before using it. - * - * for instance, using 50.7MHz and dividing by 6 gives 8.45MHz - * (8.45 ticks per usec) - */ - - pclk = clk_get_rate(timerclk); - - /* configure clock tick */ - - timer_usec_ticks = timer_mask_usec_ticks(6, pclk); - - tscaler = clk_get_parent(tdiv); - - clk_set_rate(tscaler, pclk / 3); - clk_set_rate(tdiv, pclk / 6); - clk_set_parent(tin, tdiv); - - tcnt = clk_get_rate(tin) / HZ; - } - - tcon = __raw_readl(S3C2410_TCON); - tcfg0 = __raw_readl(S3C2410_TCFG0); - tcfg1 = __raw_readl(S3C2410_TCFG1); - - /* timers reload after counting zero, so reduce the count by 1 */ - - tcnt--; - - printk(KERN_DEBUG "timer tcon=%08lx, tcnt %04lx, tcfg %08lx,%08lx, usec %08lx\n", - tcon, tcnt, tcfg0, tcfg1, timer_usec_ticks); - - /* check to see if timer is within 16bit range... */ - if (tcnt > TICK_MAX) { - panic("setup_timer: HZ is too small, cannot configure timer!"); - return; - } - - __raw_writel(tcfg1, S3C2410_TCFG1); - __raw_writel(tcfg0, S3C2410_TCFG0); - - timer_startval = tcnt; - __raw_writel(tcnt, S3C2410_TCNTB(4)); - - /* ensure timer is stopped... */ - - tcon &= ~(7<<20); - tcon |= S3C2410_TCON_T4RELOAD; - tcon |= S3C2410_TCON_T4MANUALUPD; - - __raw_writel(tcon, S3C2410_TCON); - __raw_writel(tcnt, S3C2410_TCNTB(4)); - __raw_writel(tcnt, S3C2410_TCMPB(4)); - - /* start the timer running */ - tcon |= S3C2410_TCON_T4START; - tcon &= ~S3C2410_TCON_T4MANUALUPD; - __raw_writel(tcon, S3C2410_TCON); -} - -static void __init s3c2410_timer_resources(void) -{ - struct platform_device tmpdev; - - tmpdev.dev.bus = &platform_bus_type; - tmpdev.id = 4; - - timerclk = clk_get(NULL, "timers"); - if (IS_ERR(timerclk)) - panic("failed to get clock for system timer"); - - clk_enable(timerclk); - - if (!use_tclk1_12()) { - tmpdev.id = 4; - tmpdev.dev.init_name = "s3c24xx-pwm.4"; - tin = clk_get(&tmpdev.dev, "pwm-tin"); - if (IS_ERR(tin)) - panic("failed to get pwm-tin clock for system timer"); - - tdiv = clk_get(&tmpdev.dev, "pwm-tdiv"); - if (IS_ERR(tdiv)) - panic("failed to get pwm-tdiv clock for system timer"); - } - - clk_enable(tin); -} - -static struct syscore_ops s3c24xx_syscore_ops = { - .resume = s3c2410_timer_setup, -}; - -void __init s3c24xx_timer_init(void) -{ - arch_gettimeoffset = s3c2410_gettimeoffset; - - s3c2410_timer_resources(); - s3c2410_timer_setup(); - setup_irq(IRQ_TIMER4, &s3c2410_timer_irq); - register_syscore_ops(&s3c24xx_syscore_ops); -} diff --git a/arch/arm/plat-spear/Kconfig b/arch/arm/plat-spear/Kconfig deleted file mode 100644 index 8a08c31b5e20..000000000000 --- a/arch/arm/plat-spear/Kconfig +++ /dev/null @@ -1,47 +0,0 @@ -# -# SPEAr Platform configuration file -# - -if PLAT_SPEAR - -choice - prompt "ST SPEAr Family" - default ARCH_SPEAR3XX - -config ARCH_SPEAR13XX - bool "ST SPEAr13xx with Device Tree" - select ARCH_HAS_CPUFREQ - select ARM_GIC - select CPU_V7 - select GPIO_SPEAR_SPICS - select HAVE_SMP - select MIGHT_HAVE_CACHE_L2X0 - select PINCTRL - select USE_OF - help - Supports for ARM's SPEAR13XX family - -config ARCH_SPEAR3XX - bool "ST SPEAr3xx with Device Tree" - select ARM_VIC - select CPU_ARM926T - select PINCTRL - select USE_OF - help - Supports for ARM's SPEAR3XX family - -config ARCH_SPEAR6XX - bool "SPEAr6XX" - select ARM_VIC - select CPU_ARM926T - help - Supports for ARM's SPEAR6XX family - -endchoice - -# Adding SPEAr machine specific configuration files -source "arch/arm/mach-spear13xx/Kconfig" -source "arch/arm/mach-spear3xx/Kconfig" -source "arch/arm/mach-spear6xx/Kconfig" - -endif diff --git a/arch/arm/plat-spear/Makefile b/arch/arm/plat-spear/Makefile deleted file mode 100644 index 01e88532a5db..000000000000 --- a/arch/arm/plat-spear/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# SPEAr Platform specific Makefile -# - -# Common support -obj-y := restart.o time.o - -obj-$(CONFIG_ARCH_SPEAR3XX) += pl080.o -obj-$(CONFIG_ARCH_SPEAR6XX) += pl080.o diff --git a/arch/arm/plat-versatile/platsmp.c b/arch/arm/plat-versatile/platsmp.c index f2ac15561778..1e1b2d769748 100644 --- a/arch/arm/plat-versatile/platsmp.c +++ b/arch/arm/plat-versatile/platsmp.c @@ -14,7 +14,6 @@ #include <linux/device.h> #include <linux/jiffies.h> #include <linux/smp.h> -#include <linux/irqchip/arm-gic.h> #include <asm/cacheflush.h> #include <asm/smp_plat.h> @@ -37,13 +36,6 @@ static DEFINE_SPINLOCK(boot_lock); void __cpuinit versatile_secondary_init(unsigned int cpu) { /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); - - /* * let the primary processor know we're out of the * pen, then head off into the C entry point */ diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 831e1fdfdb2f..a10297da122b 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -16,7 +16,7 @@ # are merged into mainline or have been edited in the machine database # within the last 12 months. References to machine_is_NAME() do not count! # -# Last update: Thu Apr 26 08:44:23 2012 +# Last update: Fri Mar 22 17:24:50 2013 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -64,8 +64,8 @@ h7201 ARCH_H7201 H7201 161 h7202 ARCH_H7202 H7202 162 iq80321 ARCH_IQ80321 IQ80321 169 ks8695 ARCH_KS8695 KS8695 180 -karo ARCH_KARO KARO 190 smdk2410 ARCH_SMDK2410 SMDK2410 193 +ceiva ARCH_CEIVA CEIVA 200 voiceblue MACH_VOICEBLUE VOICEBLUE 218 h5400 ARCH_H5400 H5400 220 omap_innovator MACH_OMAP_INNOVATOR OMAP_INNOVATOR 234 @@ -95,6 +95,7 @@ lpd7a400 MACH_LPD7A400 LPD7A400 389 lpd7a404 MACH_LPD7A404 LPD7A404 390 csb337 MACH_CSB337 CSB337 399 mainstone MACH_MAINSTONE MAINSTONE 406 +lite300 MACH_LITE300 LITE300 408 xcep MACH_XCEP XCEP 413 arcom_vulcan MACH_ARCOM_VULCAN ARCOM_VULCAN 414 nomadik MACH_NOMADIK NOMADIK 420 @@ -131,12 +132,14 @@ kb9200 MACH_KB9200 KB9200 612 sx1 MACH_SX1 SX1 613 ixdp465 MACH_IXDP465 IXDP465 618 ixdp2351 MACH_IXDP2351 IXDP2351 619 +cm4008 MACH_CM4008 CM4008 624 iq80332 MACH_IQ80332 IQ80332 629 gtwx5715 MACH_GTWX5715 GTWX5715 641 csb637 MACH_CSB637 CSB637 648 n30 MACH_N30 N30 656 nec_mp900 MACH_NEC_MP900 NEC_MP900 659 kafa MACH_KAFA KAFA 662 +cm41xx MACH_CM41XX CM41XX 672 ts72xx MACH_TS72XX TS72XX 673 otom MACH_OTOM OTOM 680 nexcoder_2440 MACH_NEXCODER_2440 NEXCODER_2440 681 @@ -149,6 +152,7 @@ colibri MACH_COLIBRI COLIBRI 729 gateway7001 MACH_GATEWAY7001 GATEWAY7001 731 pcm027 MACH_PCM027 PCM027 732 anubis MACH_ANUBIS ANUBIS 734 +xboardgp8 MACH_XBOARDGP8 XBOARDGP8 742 akita MACH_AKITA AKITA 744 e330 MACH_E330 E330 753 nokia770 MACH_NOKIA770 NOKIA770 755 @@ -157,9 +161,11 @@ edb9315a MACH_EDB9315A EDB9315A 772 stargate2 MACH_STARGATE2 STARGATE2 774 intelmote2 MACH_INTELMOTE2 INTELMOTE2 775 trizeps4 MACH_TRIZEPS4 TRIZEPS4 776 +pnx4008 MACH_PNX4008 PNX4008 782 cpuat91 MACH_CPUAT91 CPUAT91 787 iq81340sc MACH_IQ81340SC IQ81340SC 799 iq81340mc MACH_IQ81340MC IQ81340MC 801 +se4200 MACH_SE4200 SE4200 809 micro9 MACH_MICRO9 MICRO9 811 micro9l MACH_MICRO9L MICRO9L 812 omap_palmte MACH_OMAP_PALMTE OMAP_PALMTE 817 @@ -178,6 +184,7 @@ mx21ads MACH_MX21ADS MX21ADS 851 ams_delta MACH_AMS_DELTA AMS_DELTA 862 nas100d MACH_NAS100D NAS100D 865 magician MACH_MAGICIAN MAGICIAN 875 +cm4002 MACH_CM4002 CM4002 876 nxdkn MACH_NXDKN NXDKN 880 palmtx MACH_PALMTX PALMTX 885 s3c2413 MACH_S3C2413 S3C2413 887 @@ -203,7 +210,6 @@ omap_fsample MACH_OMAP_FSAMPLE OMAP_FSAMPLE 970 snapper_cl15 MACH_SNAPPER_CL15 SNAPPER_CL15 986 omap_palmz71 MACH_OMAP_PALMZ71 OMAP_PALMZ71 993 smdk2412 MACH_SMDK2412 SMDK2412 1009 -bkde303 MACH_BKDE303 BKDE303 1021 smdk2413 MACH_SMDK2413 SMDK2413 1022 aml_m5900 MACH_AML_M5900 AML_M5900 1024 balloon3 MACH_BALLOON3 BALLOON3 1029 @@ -214,6 +220,7 @@ fsg MACH_FSG FSG 1091 at91sam9260ek MACH_AT91SAM9260EK AT91SAM9260EK 1099 glantank MACH_GLANTANK GLANTANK 1100 n2100 MACH_N2100 N2100 1101 +im42xx MACH_IM42XX IM42XX 1105 qt2410 MACH_QT2410 QT2410 1108 kixrp435 MACH_KIXRP435 KIXRP435 1109 cc9p9360dev MACH_CC9P9360DEV CC9P9360DEV 1114 @@ -247,6 +254,7 @@ csb726 MACH_CSB726 CSB726 1359 davinci_dm6467_evm MACH_DAVINCI_DM6467_EVM DAVINCI_DM6467_EVM 1380 davinci_dm355_evm MACH_DAVINCI_DM355_EVM DAVINCI_DM355_EVM 1381 littleton MACH_LITTLETON LITTLETON 1388 +im4004 MACH_IM4004 IM4004 1400 realview_pb11mp MACH_REALVIEW_PB11MP REALVIEW_PB11MP 1407 mx27_3ds MACH_MX27_3DS MX27_3DS 1430 halibut MACH_HALIBUT HALIBUT 1439 @@ -268,6 +276,7 @@ dns323 MACH_DNS323 DNS323 1542 omap3_beagle MACH_OMAP3_BEAGLE OMAP3_BEAGLE 1546 nokia_n810 MACH_NOKIA_N810 NOKIA_N810 1548 pcm038 MACH_PCM038 PCM038 1551 +sg310 MACH_SG310 SG310 1564 ts209 MACH_TS209 TS209 1565 at91cap9adk MACH_AT91CAP9ADK AT91CAP9ADK 1566 mx31moboard MACH_MX31MOBOARD MX31MOBOARD 1574 @@ -371,7 +380,6 @@ pcm043 MACH_PCM043 PCM043 2072 sheevaplug MACH_SHEEVAPLUG SHEEVAPLUG 2097 avengers_lite MACH_AVENGERS_LITE AVENGERS_LITE 2104 mx51_babbage MACH_MX51_BABBAGE MX51_BABBAGE 2125 -tx37 MACH_TX37 TX37 2127 rd78x00_masa MACH_RD78X00_MASA RD78X00_MASA 2135 dm355_leopard MACH_DM355_LEOPARD DM355_LEOPARD 2138 ts219 MACH_TS219 TS219 2139 @@ -380,12 +388,12 @@ davinci_da850_evm MACH_DAVINCI_DA850_EVM DAVINCI_DA850_EVM 2157 at91sam9g10ek MACH_AT91SAM9G10EK AT91SAM9G10EK 2159 omap_4430sdp MACH_OMAP_4430SDP OMAP_4430SDP 2160 magx_zn5 MACH_MAGX_ZN5 MAGX_ZN5 2162 -tx25 MACH_TX25 TX25 2177 omap3_torpedo MACH_OMAP3_TORPEDO OMAP3_TORPEDO 2178 anw6410 MACH_ANW6410 ANW6410 2183 imx27_visstrim_m10 MACH_IMX27_VISSTRIM_M10 IMX27_VISSTRIM_M10 2187 portuxg20 MACH_PORTUXG20 PORTUXG20 2191 smdkc110 MACH_SMDKC110 SMDKC110 2193 +cabespresso MACH_CABESPRESSO CABESPRESSO 2194 omap3517evm MACH_OMAP3517EVM OMAP3517EVM 2200 netspace_v2 MACH_NETSPACE_V2 NETSPACE_V2 2201 netspace_max_v2 MACH_NETSPACE_MAX_V2 NETSPACE_MAX_V2 2202 @@ -404,6 +412,7 @@ bigdisk MACH_BIGDISK BIGDISK 2283 at91sam9g20ek_2mmc MACH_AT91SAM9G20EK_2MMC AT91SAM9G20EK_2MMC 2288 bcmring MACH_BCMRING BCMRING 2289 mahimahi MACH_MAHIMAHI MAHIMAHI 2304 +cerebric MACH_CEREBRIC CEREBRIC 2311 smdk6442 MACH_SMDK6442 SMDK6442 2324 openrd_base MACH_OPENRD_BASE OPENRD_BASE 2325 devkit8000 MACH_DEVKIT8000 DEVKIT8000 2330 @@ -423,10 +432,10 @@ raumfeld_rc MACH_RAUMFELD_RC RAUMFELD_RC 2413 raumfeld_connector MACH_RAUMFELD_CONNECTOR RAUMFELD_CONNECTOR 2414 raumfeld_speaker MACH_RAUMFELD_SPEAKER RAUMFELD_SPEAKER 2415 tnetv107x MACH_TNETV107X TNETV107X 2418 -mx51_m2id MACH_MX51_M2ID MX51_M2ID 2428 smdkv210 MACH_SMDKV210 SMDKV210 2456 omap_zoom3 MACH_OMAP_ZOOM3 OMAP_ZOOM3 2464 omap_3630sdp MACH_OMAP_3630SDP OMAP_3630SDP 2465 +cybook2440 MACH_CYBOOK2440 CYBOOK2440 2466 smartq7 MACH_SMARTQ7 SMARTQ7 2479 watson_efm_plugin MACH_WATSON_EFM_PLUGIN WATSON_EFM_PLUGIN 2491 g4evm MACH_G4EVM G4EVM 2493 @@ -434,12 +443,10 @@ omapl138_hawkboard MACH_OMAPL138_HAWKBOARD OMAPL138_HAWKBOARD 2495 ts41x MACH_TS41X TS41X 2502 phy3250 MACH_PHY3250 PHY3250 2511 mini6410 MACH_MINI6410 MINI6410 2520 -tx51 MACH_TX51 TX51 2529 mx28evk MACH_MX28EVK MX28EVK 2531 smartq5 MACH_SMARTQ5 SMARTQ5 2534 davinci_dm6467tevm MACH_DAVINCI_DM6467TEVM DAVINCI_DM6467TEVM 2548 mxt_td60 MACH_MXT_TD60 MXT_TD60 2550 -pca101 MACH_PCA101 PCA101 2595 capc7117 MACH_CAPC7117 CAPC7117 2612 icontrol MACH_ICONTROL ICONTROL 2624 gplugd MACH_GPLUGD GPLUGD 2625 @@ -465,6 +472,7 @@ igep0030 MACH_IGEP0030 IGEP0030 2717 sbc3530 MACH_SBC3530 SBC3530 2722 saarb MACH_SAARB SAARB 2727 harmony MACH_HARMONY HARMONY 2731 +cybook_orizon MACH_CYBOOK_ORIZON CYBOOK_ORIZON 2733 msm7x30_fluid MACH_MSM7X30_FLUID MSM7X30_FLUID 2741 cm_t3517 MACH_CM_T3517 CM_T3517 2750 wbd222 MACH_WBD222 WBD222 2753 @@ -480,10 +488,8 @@ eukrea_cpuimx35sd MACH_EUKREA_CPUIMX35SD EUKREA_CPUIMX35SD 2821 eukrea_cpuimx51sd MACH_EUKREA_CPUIMX51SD EUKREA_CPUIMX51SD 2822 eukrea_cpuimx51 MACH_EUKREA_CPUIMX51 EUKREA_CPUIMX51 2823 smdkc210 MACH_SMDKC210 SMDKC210 2838 -pcaal1 MACH_PCAAL1 PCAAL1 2843 t5325 MACH_T5325 T5325 2846 income MACH_INCOME INCOME 2849 -mx257sx MACH_MX257SX MX257SX 2861 goni MACH_GONI GONI 2862 bv07 MACH_BV07 BV07 2882 openrd_ultimate MACH_OPENRD_ULTIMATE OPENRD_ULTIMATE 2884 @@ -491,7 +497,6 @@ devixp MACH_DEVIXP DEVIXP 2885 miccpt MACH_MICCPT MICCPT 2886 mic256 MACH_MIC256 MIC256 2887 u5500 MACH_U5500 U5500 2890 -pov15hd MACH_POV15HD POV15HD 2910 linkstation_lschl MACH_LINKSTATION_LSCHL LINKSTATION_LSCHL 2913 smdkv310 MACH_SMDKV310 SMDKV310 2925 wm8505_7in_netbook MACH_WM8505_7IN_NETBOOK WM8505_7IN_NETBOOK 2928 @@ -518,7 +523,6 @@ prima2_evb MACH_PRIMA2_EVB PRIMA2_EVB 3103 paz00 MACH_PAZ00 PAZ00 3128 acmenetusfoxg20 MACH_ACMENETUSFOXG20 ACMENETUSFOXG20 3129 ag5evm MACH_AG5EVM AG5EVM 3189 -tsunagi MACH_TSUNAGI TSUNAGI 3197 ics_if_voip MACH_ICS_IF_VOIP ICS_IF_VOIP 3206 wlf_cragg_6410 MACH_WLF_CRAGG_6410 WLF_CRAGG_6410 3207 trimslice MACH_TRIMSLICE TRIMSLICE 3209 @@ -529,8 +533,6 @@ msm8960_sim MACH_MSM8960_SIM MSM8960_SIM 3230 msm8960_rumi3 MACH_MSM8960_RUMI3 MSM8960_RUMI3 3231 gsia18s MACH_GSIA18S GSIA18S 3234 mx53_loco MACH_MX53_LOCO MX53_LOCO 3273 -tx53 MACH_TX53 TX53 3279 -encore MACH_ENCORE ENCORE 3284 wario MACH_WARIO WARIO 3288 cm_t3730 MACH_CM_T3730 CM_T3730 3290 hrefv60 MACH_HREFV60 HREFV60 3293 @@ -538,603 +540,24 @@ armlex4210 MACH_ARMLEX4210 ARMLEX4210 3361 snowball MACH_SNOWBALL SNOWBALL 3363 xilinx_ep107 MACH_XILINX_EP107 XILINX_EP107 3378 nuri MACH_NURI NURI 3379 -wtplug MACH_WTPLUG WTPLUG 3412 -veridis_a300 MACH_VERIDIS_A300 VERIDIS_A300 3448 origen MACH_ORIGEN ORIGEN 3455 -wm8650refboard MACH_WM8650REFBOARD WM8650REFBOARD 3472 -xarina MACH_XARINA XARINA 3476 -sdvr MACH_SDVR SDVR 3478 -acer_maya MACH_ACER_MAYA ACER_MAYA 3479 -pico MACH_PICO PICO 3480 -cwmx233 MACH_CWMX233 CWMX233 3481 -cwam1808 MACH_CWAM1808 CWAM1808 3482 -cwdm365 MACH_CWDM365 CWDM365 3483 -mx51_moray MACH_MX51_MORAY MX51_MORAY 3484 -thales_cbc MACH_THALES_CBC THALES_CBC 3485 -bluepoint MACH_BLUEPOINT BLUEPOINT 3486 -dir665 MACH_DIR665 DIR665 3487 -acmerover1 MACH_ACMEROVER1 ACMEROVER1 3488 -shooter_ct MACH_SHOOTER_CT SHOOTER_CT 3489 -bliss MACH_BLISS BLISS 3490 -blissc MACH_BLISSC BLISSC 3491 -thales_adc MACH_THALES_ADC THALES_ADC 3492 -ubisys_p9d_evp MACH_UBISYS_P9D_EVP UBISYS_P9D_EVP 3493 -atdgp318 MACH_ATDGP318 ATDGP318 3494 -dma210u MACH_DMA210U DMA210U 3495 -em_t3 MACH_EM_T3 EM_T3 3496 -htx3250 MACH_HTX3250 HTX3250 3497 -g50 MACH_G50 G50 3498 -eco5 MACH_ECO5 ECO5 3499 -wintergrasp MACH_WINTERGRASP WINTERGRASP 3500 -puro MACH_PURO PURO 3501 -shooter_k MACH_SHOOTER_K SHOOTER_K 3502 nspire MACH_NSPIRE NSPIRE 3503 -mickxx MACH_MICKXX MICKXX 3504 -lxmb MACH_LXMB LXMB 3505 -adam MACH_ADAM ADAM 3507 -b1004 MACH_B1004 B1004 3508 -oboea MACH_OBOEA OBOEA 3509 -a1015 MACH_A1015 A1015 3510 -robin_vbdt30 MACH_ROBIN_VBDT30 ROBIN_VBDT30 3511 -tegra_enterprise MACH_TEGRA_ENTERPRISE TEGRA_ENTERPRISE 3512 -rfl108200_mk10 MACH_RFL108200_MK10 RFL108200_MK10 3513 -rfl108300_mk16 MACH_RFL108300_MK16 RFL108300_MK16 3514 -rover_v7 MACH_ROVER_V7 ROVER_V7 3515 -miphone MACH_MIPHONE MIPHONE 3516 -femtobts MACH_FEMTOBTS FEMTOBTS 3517 -monopoli MACH_MONOPOLI MONOPOLI 3518 -boss MACH_BOSS BOSS 3519 -davinci_dm368_vtam MACH_DAVINCI_DM368_VTAM DAVINCI_DM368_VTAM 3520 -clcon MACH_CLCON CLCON 3521 nokia_rm696 MACH_NOKIA_RM696 NOKIA_RM696 3522 -tahiti MACH_TAHITI TAHITI 3523 -fighter MACH_FIGHTER FIGHTER 3524 -sgh_i710 MACH_SGH_I710 SGH_I710 3525 -integreproscb MACH_INTEGREPROSCB INTEGREPROSCB 3526 -monza MACH_MONZA MONZA 3527 -calimain MACH_CALIMAIN CALIMAIN 3528 -mx6q_sabreauto MACH_MX6Q_SABREAUTO MX6Q_SABREAUTO 3529 -gma01x MACH_GMA01X GMA01X 3530 -sbc51 MACH_SBC51 SBC51 3531 -fit MACH_FIT FIT 3532 -steelhead MACH_STEELHEAD STEELHEAD 3533 -panther MACH_PANTHER PANTHER 3534 -msm8960_liquid MACH_MSM8960_LIQUID MSM8960_LIQUID 3535 -lexikonct MACH_LEXIKONCT LEXIKONCT 3536 -ns2816_stb MACH_NS2816_STB NS2816_STB 3537 -sei_mm2_lpc3250 MACH_SEI_MM2_LPC3250 SEI_MM2_LPC3250 3538 -cmimx53 MACH_CMIMX53 CMIMX53 3539 -sandwich MACH_SANDWICH SANDWICH 3540 -chief MACH_CHIEF CHIEF 3541 -pogo_e02 MACH_POGO_E02 POGO_E02 3542 mikrap_x168 MACH_MIKRAP_X168 MIKRAP_X168 3543 -htcmozart MACH_HTCMOZART HTCMOZART 3544 -htcgold MACH_HTCGOLD HTCGOLD 3545 -mt72xx MACH_MT72XX MT72XX 3546 -mx51_ivy MACH_MX51_IVY MX51_IVY 3547 -mx51_lvd MACH_MX51_LVD MX51_LVD 3548 -omap3_wiser2 MACH_OMAP3_WISER2 OMAP3_WISER2 3549 -dreamplug MACH_DREAMPLUG DREAMPLUG 3550 -cobas_c_111 MACH_COBAS_C_111 COBAS_C_111 3551 -cobas_u_411 MACH_COBAS_U_411 COBAS_U_411 3552 -hssd MACH_HSSD HSSD 3553 -iom35x MACH_IOM35X IOM35X 3554 -psom_omap MACH_PSOM_OMAP PSOM_OMAP 3555 -iphone_2g MACH_IPHONE_2G IPHONE_2G 3556 -iphone_3g MACH_IPHONE_3G IPHONE_3G 3557 -ipod_touch_1g MACH_IPOD_TOUCH_1G IPOD_TOUCH_1G 3558 -pharos_tpc MACH_PHAROS_TPC PHAROS_TPC 3559 -mx53_hydra MACH_MX53_HYDRA MX53_HYDRA 3560 -ns2816_dev_board MACH_NS2816_DEV_BOARD NS2816_DEV_BOARD 3561 -iphone_3gs MACH_IPHONE_3GS IPHONE_3GS 3562 -iphone_4 MACH_IPHONE_4 IPHONE_4 3563 -ipod_touch_4g MACH_IPOD_TOUCH_4G IPOD_TOUCH_4G 3564 -dragon_e1100 MACH_DRAGON_E1100 DRAGON_E1100 3565 -topside MACH_TOPSIDE TOPSIDE 3566 -irisiii MACH_IRISIII IRISIII 3567 deto_macarm9 MACH_DETO_MACARM9 DETO_MACARM9 3568 -eti_d1 MACH_ETI_D1 ETI_D1 3569 -som3530sdk MACH_SOM3530SDK SOM3530SDK 3570 -oc_engine MACH_OC_ENGINE OC_ENGINE 3571 -apq8064_sim MACH_APQ8064_SIM APQ8064_SIM 3572 -alps MACH_ALPS ALPS 3575 -tny_t3730 MACH_TNY_T3730 TNY_T3730 3576 -geryon_nfe MACH_GERYON_NFE GERYON_NFE 3577 -ns2816_ref_board MACH_NS2816_REF_BOARD NS2816_REF_BOARD 3578 -silverstone MACH_SILVERSTONE SILVERSTONE 3579 -mtt2440 MACH_MTT2440 MTT2440 3580 -ynicdb MACH_YNICDB YNICDB 3581 -bct MACH_BCT BCT 3582 -tuscan MACH_TUSCAN TUSCAN 3583 -xbt_sam9g45 MACH_XBT_SAM9G45 XBT_SAM9G45 3584 -enbw_cmc MACH_ENBW_CMC ENBW_CMC 3585 -ch104mx257 MACH_CH104MX257 CH104MX257 3587 -openpri MACH_OPENPRI OPENPRI 3588 -am335xevm MACH_AM335XEVM AM335XEVM 3589 -picodmb MACH_PICODMB PICODMB 3590 -waluigi MACH_WALUIGI WALUIGI 3591 -punicag7 MACH_PUNICAG7 PUNICAG7 3592 -ipad_1g MACH_IPAD_1G IPAD_1G 3593 -appletv_2g MACH_APPLETV_2G APPLETV_2G 3594 -mach_ecog45 MACH_MACH_ECOG45 MACH_ECOG45 3595 -ait_cam_enc_4xx MACH_AIT_CAM_ENC_4XX AIT_CAM_ENC_4XX 3596 -runnymede MACH_RUNNYMEDE RUNNYMEDE 3597 -play MACH_PLAY PLAY 3598 -hw90260 MACH_HW90260 HW90260 3599 -tagh MACH_TAGH TAGH 3600 -filbert MACH_FILBERT FILBERT 3601 -getinge_netcomv3 MACH_GETINGE_NETCOMV3 GETINGE_NETCOMV3 3602 -cw20 MACH_CW20 CW20 3603 -cinema MACH_CINEMA CINEMA 3604 -cinema_tea MACH_CINEMA_TEA CINEMA_TEA 3605 -cinema_coffee MACH_CINEMA_COFFEE CINEMA_COFFEE 3606 -cinema_juice MACH_CINEMA_JUICE CINEMA_JUICE 3607 -mx53_mirage2 MACH_MX53_MIRAGE2 MX53_MIRAGE2 3609 -mx53_efikasb MACH_MX53_EFIKASB MX53_EFIKASB 3610 -stm_b2000 MACH_STM_B2000 STM_B2000 3612 m28evk MACH_M28EVK M28EVK 3613 -pda MACH_PDA PDA 3614 -meraki_mr58 MACH_MERAKI_MR58 MERAKI_MR58 3615 kota2 MACH_KOTA2 KOTA2 3616 -letcool MACH_LETCOOL LETCOOL 3617 -mx27iat MACH_MX27IAT MX27IAT 3618 -apollo_td MACH_APOLLO_TD APOLLO_TD 3619 -arena MACH_ARENA ARENA 3620 -gsngateway MACH_GSNGATEWAY GSNGATEWAY 3621 -lf2000 MACH_LF2000 LF2000 3622 bonito MACH_BONITO BONITO 3623 -asymptote MACH_ASYMPTOTE ASYMPTOTE 3624 -bst2brd MACH_BST2BRD BST2BRD 3625 -tx335s MACH_TX335S TX335S 3626 -pelco_tesla MACH_PELCO_TESLA PELCO_TESLA 3627 -rrhtestplat MACH_RRHTESTPLAT RRHTESTPLAT 3628 -vidtonic_pro MACH_VIDTONIC_PRO VIDTONIC_PRO 3629 -pl_apollo MACH_PL_APOLLO PL_APOLLO 3630 -pl_phoenix MACH_PL_PHOENIX PL_PHOENIX 3631 -m28cu3 MACH_M28CU3 M28CU3 3632 -vvbox_hd MACH_VVBOX_HD VVBOX_HD 3633 -coreware_sam9260_ MACH_COREWARE_SAM9260_ COREWARE_SAM9260_ 3634 -marmaduke MACH_MARMADUKE MARMADUKE 3635 -amg_xlcore_camera MACH_AMG_XLCORE_CAMERA AMG_XLCORE_CAMERA 3636 omap3_egf MACH_OMAP3_EGF OMAP3_EGF 3637 smdk4212 MACH_SMDK4212 SMDK4212 3638 -dnp9200 MACH_DNP9200 DNP9200 3639 -tf101 MACH_TF101 TF101 3640 -omap3silvio MACH_OMAP3SILVIO OMAP3SILVIO 3641 -picasso2 MACH_PICASSO2 PICASSO2 3642 -vangogh2 MACH_VANGOGH2 VANGOGH2 3643 -olpc_xo_1_75 MACH_OLPC_XO_1_75 OLPC_XO_1_75 3644 -gx400 MACH_GX400 GX400 3645 -gs300 MACH_GS300 GS300 3646 -acer_a9 MACH_ACER_A9 ACER_A9 3647 -vivow_evm MACH_VIVOW_EVM VIVOW_EVM 3648 -veloce_cxq MACH_VELOCE_CXQ VELOCE_CXQ 3649 -veloce_cxm MACH_VELOCE_CXM VELOCE_CXM 3650 -p1852 MACH_P1852 P1852 3651 -naxy100 MACH_NAXY100 NAXY100 3652 -taishan MACH_TAISHAN TAISHAN 3653 -touchlink MACH_TOUCHLINK TOUCHLINK 3654 -stm32f103ze MACH_STM32F103ZE STM32F103ZE 3655 -mcx MACH_MCX MCX 3656 -stm_nmhdk_fli7610 MACH_STM_NMHDK_FLI7610 STM_NMHDK_FLI7610 3657 -top28x MACH_TOP28X TOP28X 3658 -okl4vp_microvisor MACH_OKL4VP_MICROVISOR OKL4VP_MICROVISOR 3659 -pop MACH_POP POP 3660 -layer MACH_LAYER LAYER 3661 -trondheim MACH_TRONDHEIM TRONDHEIM 3662 -eva MACH_EVA EVA 3663 -trust_taurus MACH_TRUST_TAURUS TRUST_TAURUS 3664 -ns2816_huashan MACH_NS2816_HUASHAN NS2816_HUASHAN 3665 -ns2816_yangcheng MACH_NS2816_YANGCHENG NS2816_YANGCHENG 3666 -p852 MACH_P852 P852 3667 -flea3 MACH_FLEA3 FLEA3 3668 -bowfin MACH_BOWFIN BOWFIN 3669 -mv88de3100 MACH_MV88DE3100 MV88DE3100 3670 -pia_am35x MACH_PIA_AM35X PIA_AM35X 3671 -cedar MACH_CEDAR CEDAR 3672 -picasso_e MACH_PICASSO_E PICASSO_E 3673 -samsung_e60 MACH_SAMSUNG_E60 SAMSUNG_E60 3674 -sdvr_mini MACH_SDVR_MINI SDVR_MINI 3676 -omap3_ij3k MACH_OMAP3_IJ3K OMAP3_IJ3K 3677 -modasmc1 MACH_MODASMC1 MODASMC1 3678 -apq8064_rumi3 MACH_APQ8064_RUMI3 APQ8064_RUMI3 3679 -matrix506 MACH_MATRIX506 MATRIX506 3680 -msm9615_mtp MACH_MSM9615_MTP MSM9615_MTP 3681 -dm36x_spawndc MACH_DM36X_SPAWNDC DM36X_SPAWNDC 3682 -sff792 MACH_SFF792 SFF792 3683 -am335xiaevm MACH_AM335XIAEVM AM335XIAEVM 3684 -g3c2440 MACH_G3C2440 G3C2440 3685 -tion270 MACH_TION270 TION270 3686 -w22q7arm02 MACH_W22Q7ARM02 W22Q7ARM02 3687 -omap_cat MACH_OMAP_CAT OMAP_CAT 3688 -at91sam9n12ek MACH_AT91SAM9N12EK AT91SAM9N12EK 3689 -morrison MACH_MORRISON MORRISON 3690 -svdu MACH_SVDU SVDU 3691 -lpp01 MACH_LPP01 LPP01 3692 -ubc283 MACH_UBC283 UBC283 3693 -zeppelin MACH_ZEPPELIN ZEPPELIN 3694 -motus MACH_MOTUS MOTUS 3695 -neomainboard MACH_NEOMAINBOARD NEOMAINBOARD 3696 -devkit3250 MACH_DEVKIT3250 DEVKIT3250 3697 -devkit7000 MACH_DEVKIT7000 DEVKIT7000 3698 -fmc_uic MACH_FMC_UIC FMC_UIC 3699 -fmc_dcm MACH_FMC_DCM FMC_DCM 3700 -batwm MACH_BATWM BATWM 3701 -atlas6cb MACH_ATLAS6CB ATLAS6CB 3702 -blue MACH_BLUE BLUE 3705 -colorado MACH_COLORADO COLORADO 3706 -popc MACH_POPC POPC 3707 -promwad_jade MACH_PROMWAD_JADE PROMWAD_JADE 3708 -amp MACH_AMP AMP 3709 -gnet_amp MACH_GNET_AMP GNET_AMP 3710 -toques MACH_TOQUES TOQUES 3711 apx4devkit MACH_APX4DEVKIT APX4DEVKIT 3712 -dct_storm MACH_DCT_STORM DCT_STORM 3713 -owl MACH_OWL OWL 3715 -cogent_csb1741 MACH_COGENT_CSB1741 COGENT_CSB1741 3716 -adillustra610 MACH_ADILLUSTRA610 ADILLUSTRA610 3718 -ecafe_na04 MACH_ECAFE_NA04 ECAFE_NA04 3719 -popct MACH_POPCT POPCT 3720 -omap3_helena MACH_OMAP3_HELENA OMAP3_HELENA 3721 -ach MACH_ACH ACH 3722 -module_dtb MACH_MODULE_DTB MODULE_DTB 3723 -oslo_elisabeth MACH_OSLO_ELISABETH OSLO_ELISABETH 3725 -tt01 MACH_TT01 TT01 3726 -msm8930_cdp MACH_MSM8930_CDP MSM8930_CDP 3727 -msm8930_mtp MACH_MSM8930_MTP MSM8930_MTP 3728 -msm8930_fluid MACH_MSM8930_FLUID MSM8930_FLUID 3729 -ltu11 MACH_LTU11 LTU11 3730 -am1808_spawnco MACH_AM1808_SPAWNCO AM1808_SPAWNCO 3731 -flx6410 MACH_FLX6410 FLX6410 3732 -mx6q_qsb MACH_MX6Q_QSB MX6Q_QSB 3733 -mx53_plt424 MACH_MX53_PLT424 MX53_PLT424 3734 -jasmine MACH_JASMINE JASMINE 3735 -l138_owlboard_plus MACH_L138_OWLBOARD_PLUS L138_OWLBOARD_PLUS 3736 -wr21 MACH_WR21 WR21 3737 -peaboy MACH_PEABOY PEABOY 3739 -mx28_plato MACH_MX28_PLATO MX28_PLATO 3740 -kacom2 MACH_KACOM2 KACOM2 3741 -slco MACH_SLCO SLCO 3742 -imx51pico MACH_IMX51PICO IMX51PICO 3743 -glink1 MACH_GLINK1 GLINK1 3744 -diamond MACH_DIAMOND DIAMOND 3745 -d9000 MACH_D9000 D9000 3746 -w5300e01 MACH_W5300E01 W5300E01 3747 -im6000 MACH_IM6000 IM6000 3748 -mx51_fred51 MACH_MX51_FRED51 MX51_FRED51 3749 -stm32f2 MACH_STM32F2 STM32F2 3750 -ville MACH_VILLE VILLE 3751 -ptip_murnau MACH_PTIP_MURNAU PTIP_MURNAU 3752 -ptip_classic MACH_PTIP_CLASSIC PTIP_CLASSIC 3753 -mx53grb MACH_MX53GRB MX53GRB 3754 -gagarin MACH_GAGARIN GAGARIN 3755 -nas2big MACH_NAS2BIG NAS2BIG 3757 -superfemto MACH_SUPERFEMTO SUPERFEMTO 3758 -teufel MACH_TEUFEL TEUFEL 3759 -dinara MACH_DINARA DINARA 3760 -vanquish MACH_VANQUISH VANQUISH 3761 -zipabox1 MACH_ZIPABOX1 ZIPABOX1 3762 -u9540 MACH_U9540 U9540 3763 -jet MACH_JET JET 3764 smdk4412 MACH_SMDK4412 SMDK4412 3765 -elite MACH_ELITE ELITE 3766 -spear320_hmi MACH_SPEAR320_HMI SPEAR320_HMI 3767 -ontario MACH_ONTARIO ONTARIO 3768 -mx6q_sabrelite MACH_MX6Q_SABRELITE MX6Q_SABRELITE 3769 -vc200 MACH_VC200 VC200 3770 -msm7625a_ffa MACH_MSM7625A_FFA MSM7625A_FFA 3771 -msm7625a_surf MACH_MSM7625A_SURF MSM7625A_SURF 3772 -benthossbp MACH_BENTHOSSBP BENTHOSSBP 3773 -smdk5210 MACH_SMDK5210 SMDK5210 3774 -empq2300 MACH_EMPQ2300 EMPQ2300 3775 -minipos MACH_MINIPOS MINIPOS 3776 -omap5_sevm MACH_OMAP5_SEVM OMAP5_SEVM 3777 -shelter MACH_SHELTER SHELTER 3778 -omap3_devkit8500 MACH_OMAP3_DEVKIT8500 OMAP3_DEVKIT8500 3779 -edgetd MACH_EDGETD EDGETD 3780 -copperyard MACH_COPPERYARD COPPERYARD 3781 -edge_u MACH_EDGE_U EDGE_U 3783 -edge_td MACH_EDGE_TD EDGE_TD 3784 -wdss MACH_WDSS WDSS 3785 -dl_pb25 MACH_DL_PB25 DL_PB25 3786 -dss11 MACH_DSS11 DSS11 3787 -cpa MACH_CPA CPA 3788 -aptp2000 MACH_APTP2000 APTP2000 3789 marzen MACH_MARZEN MARZEN 3790 -st_turbine MACH_ST_TURBINE ST_TURBINE 3791 -gtl_it3300 MACH_GTL_IT3300 GTL_IT3300 3792 -mx6_mule MACH_MX6_MULE MX6_MULE 3793 -v7pxa_dt MACH_V7PXA_DT V7PXA_DT 3794 -v7mmp_dt MACH_V7MMP_DT V7MMP_DT 3795 -dragon7 MACH_DRAGON7 DRAGON7 3796 krome MACH_KROME KROME 3797 -oratisdante MACH_ORATISDANTE ORATISDANTE 3798 -fathom MACH_FATHOM FATHOM 3799 -dns325 MACH_DNS325 DNS325 3800 -sarnen MACH_SARNEN SARNEN 3801 -ubisys_g1 MACH_UBISYS_G1 UBISYS_G1 3802 -mx53_pf1 MACH_MX53_PF1 MX53_PF1 3803 -asanti MACH_ASANTI ASANTI 3804 -volta MACH_VOLTA VOLTA 3805 -knight MACH_KNIGHT KNIGHT 3807 -beaglebone MACH_BEAGLEBONE BEAGLEBONE 3808 -becker MACH_BECKER BECKER 3809 -fc360 MACH_FC360 FC360 3810 -pmi2_xls MACH_PMI2_XLS PMI2_XLS 3811 -taranto MACH_TARANTO TARANTO 3812 -plutux MACH_PLUTUX PLUTUX 3813 -ipmp_medcom MACH_IPMP_MEDCOM IPMP_MEDCOM 3814 -absolut MACH_ABSOLUT ABSOLUT 3815 -awpb3 MACH_AWPB3 AWPB3 3816 -nfp32xx_dt MACH_NFP32XX_DT NFP32XX_DT 3817 -dl_pb53 MACH_DL_PB53 DL_PB53 3818 -acu_ii MACH_ACU_II ACU_II 3819 -avalon MACH_AVALON AVALON 3820 -sphinx MACH_SPHINX SPHINX 3821 -titan_t MACH_TITAN_T TITAN_T 3822 -harvest_boris MACH_HARVEST_BORIS HARVEST_BORIS 3823 -mach_msm7x30_m3s MACH_MACH_MSM7X30_M3S MACH_MSM7X30_M3S 3824 -smdk5250 MACH_SMDK5250 SMDK5250 3825 -imxt_lite MACH_IMXT_LITE IMXT_LITE 3826 -imxt_std MACH_IMXT_STD IMXT_STD 3827 -imxt_log MACH_IMXT_LOG IMXT_LOG 3828 -imxt_nav MACH_IMXT_NAV IMXT_NAV 3829 -imxt_full MACH_IMXT_FULL IMXT_FULL 3830 -ag09015 MACH_AG09015 AG09015 3831 -am3517_mt_ventoux MACH_AM3517_MT_VENTOUX AM3517_MT_VENTOUX 3832 -dp1arm9 MACH_DP1ARM9 DP1ARM9 3833 -picasso_m MACH_PICASSO_M PICASSO_M 3834 -video_gadget MACH_VIDEO_GADGET VIDEO_GADGET 3835 -mtt_om3x MACH_MTT_OM3X MTT_OM3X 3836 -mx6q_arm2 MACH_MX6Q_ARM2 MX6Q_ARM2 3837 -picosam9g45 MACH_PICOSAM9G45 PICOSAM9G45 3838 -vpm_dm365 MACH_VPM_DM365 VPM_DM365 3839 -bonfire MACH_BONFIRE BONFIRE 3840 -mt2p2d MACH_MT2P2D MT2P2D 3841 -sigpda01 MACH_SIGPDA01 SIGPDA01 3842 -cn27 MACH_CN27 CN27 3843 -mx25_cwtap MACH_MX25_CWTAP MX25_CWTAP 3844 -apf28 MACH_APF28 APF28 3845 -pelco_maxwell MACH_PELCO_MAXWELL PELCO_MAXWELL 3846 -ge_phoenix MACH_GE_PHOENIX GE_PHOENIX 3847 -empc_a500 MACH_EMPC_A500 EMPC_A500 3848 -ims_arm9 MACH_IMS_ARM9 IMS_ARM9 3849 -mini2416 MACH_MINI2416 MINI2416 3850 -mini2450 MACH_MINI2450 MINI2450 3851 -mini310 MACH_MINI310 MINI310 3852 -spear_hurricane MACH_SPEAR_HURRICANE SPEAR_HURRICANE 3853 -mt7208 MACH_MT7208 MT7208 3854 -lpc178x MACH_LPC178X LPC178X 3855 -farleys MACH_FARLEYS FARLEYS 3856 -efm32gg_dk3750 MACH_EFM32GG_DK3750 EFM32GG_DK3750 3857 -zeus_board MACH_ZEUS_BOARD ZEUS_BOARD 3858 -cc51 MACH_CC51 CC51 3859 -fxi_c210 MACH_FXI_C210 FXI_C210 3860 -msm8627_cdp MACH_MSM8627_CDP MSM8627_CDP 3861 -msm8627_mtp MACH_MSM8627_MTP MSM8627_MTP 3862 armadillo800eva MACH_ARMADILLO800EVA ARMADILLO800EVA 3863 -primou MACH_PRIMOU PRIMOU 3864 -primoc MACH_PRIMOC PRIMOC 3865 -primoct MACH_PRIMOCT PRIMOCT 3866 -a9500 MACH_A9500 A9500 3867 -pluto MACH_PLUTO PLUTO 3869 -acfx100 MACH_ACFX100 ACFX100 3870 -msm8625_rumi3 MACH_MSM8625_RUMI3 MSM8625_RUMI3 3871 -valente MACH_VALENTE VALENTE 3872 -crfs_rfeye MACH_CRFS_RFEYE CRFS_RFEYE 3873 -rfeye MACH_RFEYE RFEYE 3874 -phidget_sbc3 MACH_PHIDGET_SBC3 PHIDGET_SBC3 3875 -tcw_mika MACH_TCW_MIKA TCW_MIKA 3876 -imx28_egf MACH_IMX28_EGF IMX28_EGF 3877 -valente_wx MACH_VALENTE_WX VALENTE_WX 3878 -huangshans MACH_HUANGSHANS HUANGSHANS 3879 -bosphorus1 MACH_BOSPHORUS1 BOSPHORUS1 3880 -prima MACH_PRIMA PRIMA 3881 -evita_ulk MACH_EVITA_ULK EVITA_ULK 3884 -merisc600 MACH_MERISC600 MERISC600 3885 -dolak MACH_DOLAK DOLAK 3886 -sbc53 MACH_SBC53 SBC53 3887 -elite_ulk MACH_ELITE_ULK ELITE_ULK 3888 -pov2 MACH_POV2 POV2 3889 -ipod_touch_2g MACH_IPOD_TOUCH_2G IPOD_TOUCH_2G 3890 -da850_pqab MACH_DA850_PQAB DA850_PQAB 3891 -fermi MACH_FERMI FERMI 3892 -ccardwmx28 MACH_CCARDWMX28 CCARDWMX28 3893 -ccardmx28 MACH_CCARDMX28 CCARDMX28 3894 -fs20_fcm2050 MACH_FS20_FCM2050 FS20_FCM2050 3895 -kinetis MACH_KINETIS KINETIS 3896 -kai MACH_KAI KAI 3897 -bcthb2 MACH_BCTHB2 BCTHB2 3898 -inels3_cu MACH_INELS3_CU INELS3_CU 3899 -da850_apollo MACH_DA850_APOLLO DA850_APOLLO 3901 -tracnas MACH_TRACNAS TRACNAS 3902 -mityarm335x MACH_MITYARM335X MITYARM335X 3903 -xcgz7x MACH_XCGZ7X XCGZ7X 3904 -cubox MACH_CUBOX CUBOX 3905 -terminator MACH_TERMINATOR TERMINATOR 3906 -eye03 MACH_EYE03 EYE03 3907 -kota3 MACH_KOTA3 KOTA3 3908 -pscpe MACH_PSCPE PSCPE 3910 -akt1100 MACH_AKT1100 AKT1100 3911 -pcaaxl2 MACH_PCAAXL2 PCAAXL2 3912 -primodd_ct MACH_PRIMODD_CT PRIMODD_CT 3913 -nsbc MACH_NSBC NSBC 3914 -meson2_skt MACH_MESON2_SKT MESON2_SKT 3915 -meson2_ref MACH_MESON2_REF MESON2_REF 3916 -ccardwmx28js MACH_CCARDWMX28JS CCARDWMX28JS 3917 -ccardmx28js MACH_CCARDMX28JS CCARDMX28JS 3918 -indico MACH_INDICO INDICO 3919 -msm8960dt MACH_MSM8960DT MSM8960DT 3920 -primods MACH_PRIMODS PRIMODS 3921 -beluga_m1388 MACH_BELUGA_M1388 BELUGA_M1388 3922 -primotd MACH_PRIMOTD PRIMOTD 3923 -varan_master MACH_VARAN_MASTER VARAN_MASTER 3924 -primodd MACH_PRIMODD PRIMODD 3925 -jetduo MACH_JETDUO JETDUO 3926 mx53_umobo MACH_MX53_UMOBO MX53_UMOBO 3927 -trats MACH_TRATS TRATS 3928 -starcraft MACH_STARCRAFT STARCRAFT 3929 -qseven_tegra2 MACH_QSEVEN_TEGRA2 QSEVEN_TEGRA2 3930 -lichee_sun4i_devbd MACH_LICHEE_SUN4I_DEVBD LICHEE_SUN4I_DEVBD 3931 -movenow MACH_MOVENOW MOVENOW 3932 -golf_u MACH_GOLF_U GOLF_U 3933 -msm7627a_evb MACH_MSM7627A_EVB MSM7627A_EVB 3934 -rambo MACH_RAMBO RAMBO 3935 -golfu MACH_GOLFU GOLFU 3936 -mango310 MACH_MANGO310 MANGO310 3937 -dns343 MACH_DNS343 DNS343 3938 -var_som_om44 MACH_VAR_SOM_OM44 VAR_SOM_OM44 3939 -naon MACH_NAON NAON 3940 -vp4000 MACH_VP4000 VP4000 3941 -impcard MACH_IMPCARD IMPCARD 3942 -smoovcam MACH_SMOOVCAM SMOOVCAM 3943 -cobham3725 MACH_COBHAM3725 COBHAM3725 3944 -cobham3730 MACH_COBHAM3730 COBHAM3730 3945 -cobham3703 MACH_COBHAM3703 COBHAM3703 3946 -quetzal MACH_QUETZAL QUETZAL 3947 -apq8064_cdp MACH_APQ8064_CDP APQ8064_CDP 3948 -apq8064_mtp MACH_APQ8064_MTP APQ8064_MTP 3949 -apq8064_fluid MACH_APQ8064_FLUID APQ8064_FLUID 3950 -apq8064_liquid MACH_APQ8064_LIQUID APQ8064_LIQUID 3951 -mango210 MACH_MANGO210 MANGO210 3952 -mango100 MACH_MANGO100 MANGO100 3953 -mango24 MACH_MANGO24 MANGO24 3954 -mango64 MACH_MANGO64 MANGO64 3955 -nsa320 MACH_NSA320 NSA320 3956 -elv_ccu2 MACH_ELV_CCU2 ELV_CCU2 3957 -triton_x00 MACH_TRITON_X00 TRITON_X00 3958 -triton_1500_2000 MACH_TRITON_1500_2000 TRITON_1500_2000 3959 -pogoplugv4 MACH_POGOPLUGV4 POGOPLUGV4 3960 -venus_cl MACH_VENUS_CL VENUS_CL 3961 -vulcano_g20 MACH_VULCANO_G20 VULCANO_G20 3962 -sgs_i9100 MACH_SGS_I9100 SGS_I9100 3963 -stsv2 MACH_STSV2 STSV2 3964 -csb1724 MACH_CSB1724 CSB1724 3965 -omapl138_lcdk MACH_OMAPL138_LCDK OMAPL138_LCDK 3966 -pvd_mx25 MACH_PVD_MX25 PVD_MX25 3968 -meson6_skt MACH_MESON6_SKT MESON6_SKT 3969 -meson6_ref MACH_MESON6_REF MESON6_REF 3970 -pxm MACH_PXM PXM 3971 -pogoplugv3 MACH_POGOPLUGV3 POGOPLUGV3 3973 -mlp89626 MACH_MLP89626 MLP89626 3974 -iomegahmndce MACH_IOMEGAHMNDCE IOMEGAHMNDCE 3975 -pogoplugv3pci MACH_POGOPLUGV3PCI POGOPLUGV3PCI 3976 -bntv250 MACH_BNTV250 BNTV250 3977 -mx53_qseven MACH_MX53_QSEVEN MX53_QSEVEN 3978 -gtl_it1100 MACH_GTL_IT1100 GTL_IT1100 3979 -mx6q_sabresd MACH_MX6Q_SABRESD MX6Q_SABRESD 3980 mt4 MACH_MT4 MT4 3981 -jumbo_d MACH_JUMBO_D JUMBO_D 3982 -jumbo_i MACH_JUMBO_I JUMBO_I 3983 -fs20_dmp MACH_FS20_DMP FS20_DMP 3984 -dns320 MACH_DNS320 DNS320 3985 -mx28bacos MACH_MX28BACOS MX28BACOS 3986 -tl80 MACH_TL80 TL80 3987 -polatis_nic_1001 MACH_POLATIS_NIC_1001 POLATIS_NIC_1001 3988 -tely MACH_TELY TELY 3989 u8520 MACH_U8520 U8520 3990 -manta MACH_MANTA MANTA 3991 -mpq8064_cdp MACH_MPQ8064_CDP MPQ8064_CDP 3993 -mpq8064_dtv MACH_MPQ8064_DTV MPQ8064_DTV 3995 -dm368som MACH_DM368SOM DM368SOM 3996 -gprisb2 MACH_GPRISB2 GPRISB2 3997 -chammid MACH_CHAMMID CHAMMID 3998 -seoul2 MACH_SEOUL2 SEOUL2 3999 -omap4_nooktablet MACH_OMAP4_NOOKTABLET OMAP4_NOOKTABLET 4000 -aalto MACH_AALTO AALTO 4001 -metro MACH_METRO METRO 4002 -cydm3730 MACH_CYDM3730 CYDM3730 4003 -tqma53 MACH_TQMA53 TQMA53 4004 -msm7627a_qrd3 MACH_MSM7627A_QRD3 MSM7627A_QRD3 4005 -mx28_canby MACH_MX28_CANBY MX28_CANBY 4006 -tiger MACH_TIGER TIGER 4007 -pcats_9307_type_a MACH_PCATS_9307_TYPE_A PCATS_9307_TYPE_A 4008 -pcats_9307_type_o MACH_PCATS_9307_TYPE_O PCATS_9307_TYPE_O 4009 -pcats_9307_type_r MACH_PCATS_9307_TYPE_R PCATS_9307_TYPE_R 4010 -streamplug MACH_STREAMPLUG STREAMPLUG 4011 -icechicken_dev MACH_ICECHICKEN_DEV ICECHICKEN_DEV 4012 -hedgehog MACH_HEDGEHOG HEDGEHOG 4013 -yusend_obc MACH_YUSEND_OBC YUSEND_OBC 4014 -imxninja MACH_IMXNINJA IMXNINJA 4015 -omap4_jarod MACH_OMAP4_JAROD OMAP4_JAROD 4016 -eco5_pk MACH_ECO5_PK ECO5_PK 4017 -qj2440 MACH_QJ2440 QJ2440 4018 -mx6q_mercury MACH_MX6Q_MERCURY MX6Q_MERCURY 4019 -cm6810 MACH_CM6810 CM6810 4020 -omap4_torpedo MACH_OMAP4_TORPEDO OMAP4_TORPEDO 4021 -nsa310 MACH_NSA310 NSA310 4022 -tmx536 MACH_TMX536 TMX536 4023 -ktt20 MACH_KTT20 KTT20 4024 -dragonix MACH_DRAGONIX DRAGONIX 4025 -lungching MACH_LUNGCHING LUNGCHING 4026 -bulogics MACH_BULOGICS BULOGICS 4027 -mx535_sx MACH_MX535_SX MX535_SX 4028 -ngui3250 MACH_NGUI3250 NGUI3250 4029 -salutec_dac MACH_SALUTEC_DAC SALUTEC_DAC 4030 -loco MACH_LOCO LOCO 4031 -ctera_plug_usi MACH_CTERA_PLUG_USI CTERA_PLUG_USI 4032 -scepter MACH_SCEPTER SCEPTER 4033 -sga MACH_SGA SGA 4034 -p_81_j5 MACH_P_81_J5 P_81_J5 4035 -p_81_o4 MACH_P_81_O4 P_81_O4 4036 -msm8625_surf MACH_MSM8625_SURF MSM8625_SURF 4037 -carallon_shark MACH_CARALLON_SHARK CARALLON_SHARK 4038 -ordog MACH_ORDOG ORDOG 4040 -puente_io MACH_PUENTE_IO PUENTE_IO 4041 -msm8625_evb MACH_MSM8625_EVB MSM8625_EVB 4042 -ev_am1707 MACH_EV_AM1707 EV_AM1707 4043 -ev_am1707e2 MACH_EV_AM1707E2 EV_AM1707E2 4044 -ev_am3517e2 MACH_EV_AM3517E2 EV_AM3517E2 4045 -calabria MACH_CALABRIA CALABRIA 4046 -ev_imx287 MACH_EV_IMX287 EV_IMX287 4047 -erau MACH_ERAU ERAU 4048 -sichuan MACH_SICHUAN SICHUAN 4049 -davinci_da850 MACH_DAVINCI_DA850 DAVINCI_DA850 4051 -omap138_trunarc MACH_OMAP138_TRUNARC OMAP138_TRUNARC 4052 -bcm4761 MACH_BCM4761 BCM4761 4053 -picasso_e2 MACH_PICASSO_E2 PICASSO_E2 4054 -picasso_mf MACH_PICASSO_MF PICASSO_MF 4055 -miro MACH_MIRO MIRO 4056 -at91sam9g20ewon3 MACH_AT91SAM9G20EWON3 AT91SAM9G20EWON3 4057 -yoyo MACH_YOYO YOYO 4058 -windjkl MACH_WINDJKL WINDJKL 4059 -monarudo MACH_MONARUDO MONARUDO 4060 -batan MACH_BATAN BATAN 4061 -tadao MACH_TADAO TADAO 4062 -baso MACH_BASO BASO 4063 -mahon MACH_MAHON MAHON 4064 -villec2 MACH_VILLEC2 VILLEC2 4065 -asi1230 MACH_ASI1230 ASI1230 4066 -alaska MACH_ALASKA ALASKA 4067 -swarco_shdsl2 MACH_SWARCO_SHDSL2 SWARCO_SHDSL2 4068 -oxrtu MACH_OXRTU OXRTU 4069 -omap5_panda MACH_OMAP5_PANDA OMAP5_PANDA 4070 -c8000 MACH_C8000 C8000 4072 -bje_display3_5 MACH_BJE_DISPLAY3_5 BJE_DISPLAY3_5 4073 -picomod7 MACH_PICOMOD7 PICOMOD7 4074 -picocom5 MACH_PICOCOM5 PICOCOM5 4075 -qblissa8 MACH_QBLISSA8 QBLISSA8 4076 -armstonea8 MACH_ARMSTONEA8 ARMSTONEA8 4077 -netdcu14 MACH_NETDCU14 NETDCU14 4078 -at91sam9x5_epiphan MACH_AT91SAM9X5_EPIPHAN AT91SAM9X5_EPIPHAN 4079 -p2u MACH_P2U P2U 4080 -doris MACH_DORIS DORIS 4081 -j49 MACH_J49 J49 4082 -vdss2e MACH_VDSS2E VDSS2E 4083 -vc300 MACH_VC300 VC300 4084 -ns115_pad_test MACH_NS115_PAD_TEST NS115_PAD_TEST 4085 -ns115_pad_ref MACH_NS115_PAD_REF NS115_PAD_REF 4086 -ns115_phone_test MACH_NS115_PHONE_TEST NS115_PHONE_TEST 4087 -ns115_phone_ref MACH_NS115_PHONE_REF NS115_PHONE_REF 4088 -golfc MACH_GOLFC GOLFC 4089 -xerox_olympus MACH_XEROX_OLYMPUS XEROX_OLYMPUS 4090 -mx6sl_arm2 MACH_MX6SL_ARM2 MX6SL_ARM2 4091 -csb1701_csb1726 MACH_CSB1701_CSB1726 CSB1701_CSB1726 4092 -at91sam9xeek MACH_AT91SAM9XEEK AT91SAM9XEEK 4093 -ebv210 MACH_EBV210 EBV210 4094 -msm7627a_qrd7 MACH_MSM7627A_QRD7 MSM7627A_QRD7 4095 -svthin MACH_SVTHIN SVTHIN 4096 -duovero MACH_DUOVERO DUOVERO 4097 chupacabra MACH_CHUPACABRA CHUPACABRA 4098 scorpion MACH_SCORPION SCORPION 4099 davinci_he_hmi10 MACH_DAVINCI_HE_HMI10 DAVINCI_HE_HMI10 4100 @@ -1157,7 +580,6 @@ tam335x MACH_TAM335X TAM335X 4116 grouper MACH_GROUPER GROUPER 4117 mpcsa21_9g20 MACH_MPCSA21_9G20 MPCSA21_9G20 4118 m6u_cpu MACH_M6U_CPU M6U_CPU 4119 -davinci_dp10 MACH_DAVINCI_DP10 DAVINCI_DP10 4120 ginkgo MACH_GINKGO GINKGO 4121 cgt_qmx6 MACH_CGT_QMX6 CGT_QMX6 4122 profpga MACH_PROFPGA PROFPGA 4123 @@ -1204,3 +626,384 @@ baileys MACH_BAILEYS BAILEYS 4169 familybox MACH_FAMILYBOX FAMILYBOX 4170 ensemble_mx35 MACH_ENSEMBLE_MX35 ENSEMBLE_MX35 4171 sc_sps_1 MACH_SC_SPS_1 SC_SPS_1 4172 +ucsimply_sam9260 MACH_UCSIMPLY_SAM9260 UCSIMPLY_SAM9260 4173 +unicorn MACH_UNICORN UNICORN 4174 +m9g45a MACH_M9G45A M9G45A 4175 +mtwebif MACH_MTWEBIF MTWEBIF 4176 +playstone MACH_PLAYSTONE PLAYSTONE 4177 +chelsea MACH_CHELSEA CHELSEA 4178 +bayern MACH_BAYERN BAYERN 4179 +mitwo MACH_MITWO MITWO 4180 +mx25_noah MACH_MX25_NOAH MX25_NOAH 4181 +stm_b2020 MACH_STM_B2020 STM_B2020 4182 +annax_src MACH_ANNAX_SRC ANNAX_SRC 4183 +ionics_stratus MACH_IONICS_STRATUS IONICS_STRATUS 4184 +hugo MACH_HUGO HUGO 4185 +em300 MACH_EM300 EM300 4186 +mmp3_qseven MACH_MMP3_QSEVEN MMP3_QSEVEN 4187 +bosphorus2 MACH_BOSPHORUS2 BOSPHORUS2 4188 +tt2200 MACH_TT2200 TT2200 4189 +ocelot3 MACH_OCELOT3 OCELOT3 4190 +tek_cobra MACH_TEK_COBRA TEK_COBRA 4191 +protou MACH_PROTOU PROTOU 4192 +msm8625_evt MACH_MSM8625_EVT MSM8625_EVT 4193 +mx53_sellwood MACH_MX53_SELLWOOD MX53_SELLWOOD 4194 +somiq_am35 MACH_SOMIQ_AM35 SOMIQ_AM35 4195 +somiq_am37 MACH_SOMIQ_AM37 SOMIQ_AM37 4196 +k2_plc_cl MACH_K2_PLC_CL K2_PLC_CL 4197 +tc2 MACH_TC2 TC2 4198 +dulex_j MACH_DULEX_J DULEX_J 4199 +stm_b2044 MACH_STM_B2044 STM_B2044 4200 +deluxe_j MACH_DELUXE_J DELUXE_J 4201 +mango2443 MACH_MANGO2443 MANGO2443 4202 +cp2dcg MACH_CP2DCG CP2DCG 4203 +cp2dtg MACH_CP2DTG CP2DTG 4204 +cp2dug MACH_CP2DUG CP2DUG 4205 +var_som_am33 MACH_VAR_SOM_AM33 VAR_SOM_AM33 4206 +pepper MACH_PEPPER PEPPER 4207 +mango2450 MACH_MANGO2450 MANGO2450 4208 +valente_wx_c9 MACH_VALENTE_WX_C9 VALENTE_WX_C9 4209 +minitv MACH_MINITV MINITV 4210 +u8540 MACH_U8540 U8540 4211 +iv_atlas_i_z7e MACH_IV_ATLAS_I_Z7E IV_ATLAS_I_Z7E 4212 +mach_type_sky MACH_MACH_TYPE_SKY MACH_TYPE_SKY 4214 +bluesky MACH_BLUESKY BLUESKY 4215 +ngrouter MACH_NGROUTER NGROUTER 4216 +mx53_denetim MACH_MX53_DENETIM MX53_DENETIM 4217 +opal MACH_OPAL OPAL 4218 +gnet_us3gref MACH_GNET_US3GREF GNET_US3GREF 4219 +gnet_nc3g MACH_GNET_NC3G GNET_NC3G 4220 +gnet_ge3g MACH_GNET_GE3G GNET_GE3G 4221 +adp2 MACH_ADP2 ADP2 4222 +tqma28 MACH_TQMA28 TQMA28 4223 +kacom3 MACH_KACOM3 KACOM3 4224 +rrhdemo MACH_RRHDEMO RRHDEMO 4225 +protodug MACH_PROTODUG PROTODUG 4226 +lago MACH_LAGO LAGO 4227 +ktt30 MACH_KTT30 KTT30 4228 +ts43xx MACH_TS43XX TS43XX 4229 +mx6q_denso MACH_MX6Q_DENSO MX6Q_DENSO 4230 +comsat_gsmumts8 MACH_COMSAT_GSMUMTS8 COMSAT_GSMUMTS8 4231 +dreamx MACH_DREAMX DREAMX 4232 +thunderstonem MACH_THUNDERSTONEM THUNDERSTONEM 4233 +yoyopad MACH_YOYOPAD YOYOPAD 4234 +yoyopatient MACH_YOYOPATIENT YOYOPATIENT 4235 +a10l MACH_A10L A10L 4236 +mq60 MACH_MQ60 MQ60 4237 +linkstation_lsql MACH_LINKSTATION_LSQL LINKSTATION_LSQL 4238 +am3703gateway MACH_AM3703GATEWAY AM3703GATEWAY 4239 +accipiter MACH_ACCIPITER ACCIPITER 4240 +magnidug MACH_MAGNIDUG MAGNIDUG 4242 +hydra MACH_HYDRA HYDRA 4243 +sun3i MACH_SUN3I SUN3I 4244 +stm_b2078 MACH_STM_B2078 STM_B2078 4245 +at91sam9263deskv2 MACH_AT91SAM9263DESKV2 AT91SAM9263DESKV2 4246 +deluxe_r MACH_DELUXE_R DELUXE_R 4247 +p_98_v MACH_P_98_V P_98_V 4248 +p_98_c MACH_P_98_C P_98_C 4249 +davinci_am18xx_omn MACH_DAVINCI_AM18XX_OMN DAVINCI_AM18XX_OMN 4250 +socfpga_cyclone5 MACH_SOCFPGA_CYCLONE5 SOCFPGA_CYCLONE5 4251 +cabatuin MACH_CABATUIN CABATUIN 4252 +yoyopad_ft MACH_YOYOPAD_FT YOYOPAD_FT 4253 +dan2400evb MACH_DAN2400EVB DAN2400EVB 4254 +dan3400evb MACH_DAN3400EVB DAN3400EVB 4255 +edm_sf_imx6 MACH_EDM_SF_IMX6 EDM_SF_IMX6 4256 +edm_cf_imx6 MACH_EDM_CF_IMX6 EDM_CF_IMX6 4257 +vpos3xx MACH_VPOS3XX VPOS3XX 4258 +vulcano_9x5 MACH_VULCANO_9X5 VULCANO_9X5 4259 +spmp8000 MACH_SPMP8000 SPMP8000 4260 +catalina MACH_CATALINA CATALINA 4261 +rd88f5181l_fe MACH_RD88F5181L_FE RD88F5181L_FE 4262 +mx535_mx MACH_MX535_MX MX535_MX 4263 +armadillo840 MACH_ARMADILLO840 ARMADILLO840 4264 +spc9000baseboard MACH_SPC9000BASEBOARD SPC9000BASEBOARD 4265 +iris MACH_IRIS IRIS 4266 +protodcg MACH_PROTODCG PROTODCG 4267 +palmtree MACH_PALMTREE PALMTREE 4268 +novena MACH_NOVENA NOVENA 4269 +ma_um MACH_MA_UM MA_UM 4270 +ma_am MACH_MA_AM MA_AM 4271 +ems348 MACH_EMS348 EMS348 4272 +cm_fx6 MACH_CM_FX6 CM_FX6 4273 +arndale MACH_ARNDALE ARNDALE 4274 +q5xr5 MACH_Q5XR5 Q5XR5 4275 +willow MACH_WILLOW WILLOW 4276 +omap3621_odyv3 MACH_OMAP3621_ODYV3 OMAP3621_ODYV3 4277 +omapl138_presonus MACH_OMAPL138_PRESONUS OMAPL138_PRESONUS 4278 +dvf99 MACH_DVF99 DVF99 4279 +impression_j MACH_IMPRESSION_J IMPRESSION_J 4280 +qblissa9 MACH_QBLISSA9 QBLISSA9 4281 +robin_heliview10 MACH_ROBIN_HELIVIEW10 ROBIN_HELIVIEW10 4282 +sun7i MACH_SUN7I SUN7I 4283 +mx6q_hdmidongle MACH_MX6Q_HDMIDONGLE MX6Q_HDMIDONGLE 4284 +mx6_sid2 MACH_MX6_SID2 MX6_SID2 4285 +helios_v3 MACH_HELIOS_V3 HELIOS_V3 4286 +helios_v4 MACH_HELIOS_V4 HELIOS_V4 4287 +q7_imx6 MACH_Q7_IMX6 Q7_IMX6 4288 +odroidx MACH_ODROIDX ODROIDX 4289 +robpro MACH_ROBPRO ROBPRO 4290 +research59if_mk1 MACH_RESEARCH59IF_MK1 RESEARCH59IF_MK1 4291 +bobsleigh MACH_BOBSLEIGH BOBSLEIGH 4292 +dcshgwt3 MACH_DCSHGWT3 DCSHGWT3 4293 +gld1018 MACH_GLD1018 GLD1018 4294 +ev10 MACH_EV10 EV10 4295 +nitrogen6x MACH_NITROGEN6X NITROGEN6X 4296 +p_107_bb MACH_P_107_BB P_107_BB 4297 +evita_utl MACH_EVITA_UTL EVITA_UTL 4298 +falconwing MACH_FALCONWING FALCONWING 4299 +dct3 MACH_DCT3 DCT3 4300 +cpx2e_cell MACH_CPX2E_CELL CPX2E_CELL 4301 +amiro MACH_AMIRO AMIRO 4302 +mx6q_brassboard MACH_MX6Q_BRASSBOARD MX6Q_BRASSBOARD 4303 +dalmore MACH_DALMORE DALMORE 4304 +omap3_portal7cp MACH_OMAP3_PORTAL7CP OMAP3_PORTAL7CP 4305 +tegra_pluto MACH_TEGRA_PLUTO TEGRA_PLUTO 4306 +mx6sl_evk MACH_MX6SL_EVK MX6SL_EVK 4307 +m7 MACH_M7 M7 4308 +pxm2 MACH_PXM2 PXM2 4309 +haba_knx_lite MACH_HABA_KNX_LITE HABA_KNX_LITE 4310 +tai MACH_TAI TAI 4311 +prototd MACH_PROTOTD PROTOTD 4312 +dst_tonto MACH_DST_TONTO DST_TONTO 4313 +draco MACH_DRACO DRACO 4314 +dxr2 MACH_DXR2 DXR2 4315 +rut MACH_RUT RUT 4316 +am180x_wsc MACH_AM180X_WSC AM180X_WSC 4317 +deluxe_u MACH_DELUXE_U DELUXE_U 4318 +deluxe_ul MACH_DELUXE_UL DELUXE_UL 4319 +at91sam9260medths MACH_AT91SAM9260MEDTHS AT91SAM9260MEDTHS 4320 +matrix516 MACH_MATRIX516 MATRIX516 4321 +vid401x MACH_VID401X VID401X 4322 +helios_v5 MACH_HELIOS_V5 HELIOS_V5 4323 +playpaq2 MACH_PLAYPAQ2 PLAYPAQ2 4324 +igam MACH_IGAM IGAM 4325 +amico_i MACH_AMICO_I AMICO_I 4326 +amico_e MACH_AMICO_E AMICO_E 4327 +sentient_mm3_ck MACH_SENTIENT_MM3_CK SENTIENT_MM3_CK 4328 +smx6 MACH_SMX6 SMX6 4329 +pango MACH_PANGO PANGO 4330 +ns115_stick MACH_NS115_STICK NS115_STICK 4331 +bctrm3 MACH_BCTRM3 BCTRM3 4332 +doctorws MACH_DOCTORWS DOCTORWS 4333 +m2601 MACH_M2601 M2601 4334 +vgg1111 MACH_VGG1111 VGG1111 4337 +countach MACH_COUNTACH COUNTACH 4338 +visstrim_sm20 MACH_VISSTRIM_SM20 VISSTRIM_SM20 4339 +a639 MACH_A639 A639 4340 +spacemonkey MACH_SPACEMONKEY SPACEMONKEY 4341 +zpdu_stamp MACH_ZPDU_STAMP ZPDU_STAMP 4342 +htc_g7_clone MACH_HTC_G7_CLONE HTC_G7_CLONE 4343 +ft2080_corvus MACH_FT2080_CORVUS FT2080_CORVUS 4344 +fisland MACH_FISLAND FISLAND 4345 +zpdu MACH_ZPDU ZPDU 4346 +urt MACH_URT URT 4347 +conti_ovip MACH_CONTI_OVIP CONTI_OVIP 4348 +omapl138_nagra MACH_OMAPL138_NAGRA OMAPL138_NAGRA 4349 +da850_at3kp1 MACH_DA850_AT3KP1 DA850_AT3KP1 4350 +da850_at3kp2 MACH_DA850_AT3KP2 DA850_AT3KP2 4351 +surma MACH_SURMA SURMA 4352 +stm_b2092 MACH_STM_B2092 STM_B2092 4353 +mx535_ycr MACH_MX535_YCR MX535_YCR 4354 +m7_wl MACH_M7_WL M7_WL 4355 +m7_u MACH_M7_U M7_U 4356 +omap3_stndt_evm MACH_OMAP3_STNDT_EVM OMAP3_STNDT_EVM 4357 +m7_wlv MACH_M7_WLV M7_WLV 4358 +xam3517 MACH_XAM3517 XAM3517 4359 +a220 MACH_A220 A220 4360 +aclima_odie MACH_ACLIMA_ODIE ACLIMA_ODIE 4361 +vibble MACH_VIBBLE VIBBLE 4362 +k2_u MACH_K2_U K2_U 4363 +mx53_egf MACH_MX53_EGF MX53_EGF 4364 +novpek_imx53 MACH_NOVPEK_IMX53 NOVPEK_IMX53 4365 +novpek_imx6x MACH_NOVPEK_IMX6X NOVPEK_IMX6X 4366 +mx25_smartbox MACH_MX25_SMARTBOX MX25_SMARTBOX 4367 +eicg6410 MACH_EICG6410 EICG6410 4368 +picasso_e3 MACH_PICASSO_E3 PICASSO_E3 4369 +motonavigator MACH_MOTONAVIGATOR MOTONAVIGATOR 4370 +varioconnect2 MACH_VARIOCONNECT2 VARIOCONNECT2 4371 +deluxe_tw MACH_DELUXE_TW DELUXE_TW 4372 +kore3 MACH_KORE3 KORE3 4374 +mx6s_drs MACH_MX6S_DRS MX6S_DRS 4375 +cmimx6 MACH_CMIMX6 CMIMX6 4376 +roth MACH_ROTH ROTH 4377 +eq4ux MACH_EQ4UX EQ4UX 4378 +x1plus MACH_X1PLUS X1PLUS 4379 +modimx27 MACH_MODIMX27 MODIMX27 4380 +videon_hduac MACH_VIDEON_HDUAC VIDEON_HDUAC 4381 +blackbird MACH_BLACKBIRD BLACKBIRD 4382 +runmaster MACH_RUNMASTER RUNMASTER 4383 +ceres MACH_CERES CERES 4384 +nad435 MACH_NAD435 NAD435 4385 +ns115_proto_type MACH_NS115_PROTO_TYPE NS115_PROTO_TYPE 4386 +fs20_vcc MACH_FS20_VCC FS20_VCC 4387 +meson6tv_skt MACH_MESON6TV_SKT MESON6TV_SKT 4389 +keystone MACH_KEYSTONE KEYSTONE 4390 +pcm052 MACH_PCM052 PCM052 4391 +qrd_skud_prime MACH_QRD_SKUD_PRIME QRD_SKUD_PRIME 4393 +guf_santaro MACH_GUF_SANTARO GUF_SANTARO 4395 +sheepshead MACH_SHEEPSHEAD SHEEPSHEAD 4396 +mx6_iwg15m_mxm MACH_MX6_IWG15M_MXM MX6_IWG15M_MXM 4397 +mx6_iwg15m_q7 MACH_MX6_IWG15M_Q7 MX6_IWG15M_Q7 4398 +at91sam9263if8mic MACH_AT91SAM9263IF8MIC AT91SAM9263IF8MIC 4399 +marcopolo MACH_MARCOPOLO MARCOPOLO 4401 +mx535_sdcr MACH_MX535_SDCR MX535_SDCR 4402 +mx53_csb2733 MACH_MX53_CSB2733 MX53_CSB2733 4403 +diva MACH_DIVA DIVA 4404 +ncr_7744 MACH_NCR_7744 NCR_7744 4405 +macallan MACH_MACALLAN MACALLAN 4406 +wnr3500 MACH_WNR3500 WNR3500 4407 +pgavrf MACH_PGAVRF PGAVRF 4408 +helios_v6 MACH_HELIOS_V6 HELIOS_V6 4409 +lcct MACH_LCCT LCCT 4410 +csndug MACH_CSNDUG CSNDUG 4411 +wandboard_imx6 MACH_WANDBOARD_IMX6 WANDBOARD_IMX6 4412 +omap4_jet MACH_OMAP4_JET OMAP4_JET 4413 +tegra_roth MACH_TEGRA_ROTH TEGRA_ROTH 4414 +m7dcg MACH_M7DCG M7DCG 4415 +m7dug MACH_M7DUG M7DUG 4416 +m7dtg MACH_M7DTG M7DTG 4417 +ap42x MACH_AP42X AP42X 4418 +var_som_mx6 MACH_VAR_SOM_MX6 VAR_SOM_MX6 4419 +pdlu MACH_PDLU PDLU 4420 +hydrogen MACH_HYDROGEN HYDROGEN 4421 +npa211e MACH_NPA211E NPA211E 4422 +arcadia MACH_ARCADIA ARCADIA 4423 +arcadia_l MACH_ARCADIA_L ARCADIA_L 4424 +msm8930dt MACH_MSM8930DT MSM8930DT 4425 +ktam3874 MACH_KTAM3874 KTAM3874 4426 +cec4 MACH_CEC4 CEC4 4427 +ape6evm MACH_APE6EVM APE6EVM 4428 +tx6 MACH_TX6 TX6 4429 +cfa10037 MACH_CFA10037 CFA10037 4431 +ezp1000 MACH_EZP1000 EZP1000 4433 +wgr826v MACH_WGR826V WGR826V 4434 +exuma MACH_EXUMA EXUMA 4435 +fregate MACH_FREGATE FREGATE 4436 +osirisimx508 MACH_OSIRISIMX508 OSIRISIMX508 4437 +st_exigo MACH_ST_EXIGO ST_EXIGO 4438 +pismo MACH_PISMO PISMO 4439 +atc7 MACH_ATC7 ATC7 4440 +nspireclp MACH_NSPIRECLP NSPIRECLP 4441 +nspiretp MACH_NSPIRETP NSPIRETP 4442 +nspirecx MACH_NSPIRECX NSPIRECX 4443 +maya MACH_MAYA MAYA 4444 +wecct MACH_WECCT WECCT 4445 +m2s MACH_M2S M2S 4446 +msm8625q_evbd MACH_MSM8625Q_EVBD MSM8625Q_EVBD 4447 +tiny210 MACH_TINY210 TINY210 4448 +g3 MACH_G3 G3 4449 +hurricane MACH_HURRICANE HURRICANE 4450 +mx6_pod MACH_MX6_POD MX6_POD 4451 +elondcn MACH_ELONDCN ELONDCN 4452 +cwmx535 MACH_CWMX535 CWMX535 4453 +m7_wlj MACH_M7_WLJ M7_WLJ 4454 +qsp_arm MACH_QSP_ARM QSP_ARM 4455 +msm8625q_skud MACH_MSM8625Q_SKUD MSM8625Q_SKUD 4456 +htcmondrian MACH_HTCMONDRIAN HTCMONDRIAN 4457 +watson_ead MACH_WATSON_EAD WATSON_EAD 4458 +mitwoa MACH_MITWOA MITWOA 4459 +omap3_wolverine MACH_OMAP3_WOLVERINE OMAP3_WOLVERINE 4460 +mapletree MACH_MAPLETREE MAPLETREE 4461 +msm8625_fih_sae MACH_MSM8625_FIH_SAE MSM8625_FIH_SAE 4462 +epc35 MACH_EPC35 EPC35 4463 +smartrtu MACH_SMARTRTU SMARTRTU 4464 +rcm101 MACH_RCM101 RCM101 4465 +amx_imx53_mxx MACH_AMX_IMX53_MXX AMX_IMX53_MXX 4466 +acer_a12 MACH_ACER_A12 ACER_A12 4470 +sbc6x MACH_SBC6X SBC6X 4471 +u2 MACH_U2 U2 4472 +smdk4270 MACH_SMDK4270 SMDK4270 4473 +priscillag MACH_PRISCILLAG PRISCILLAG 4474 +priscillac MACH_PRISCILLAC PRISCILLAC 4475 +priscilla MACH_PRISCILLA PRISCILLA 4476 +innova_shpu_v2 MACH_INNOVA_SHPU_V2 INNOVA_SHPU_V2 4477 +mach_type_dep2410 MACH_MACH_TYPE_DEP2410 MACH_TYPE_DEP2410 4479 +bctre3 MACH_BCTRE3 BCTRE3 4480 +omap_m100 MACH_OMAP_M100 OMAP_M100 4481 +flo MACH_FLO FLO 4482 +nanobone MACH_NANOBONE NANOBONE 4483 +stm_b2105 MACH_STM_B2105 STM_B2105 4484 +omap4_bsc_bap_v3 MACH_OMAP4_BSC_BAP_V3 OMAP4_BSC_BAP_V3 4485 +ss1pam MACH_SS1PAM SS1PAM 4486 +primominiu MACH_PRIMOMINIU PRIMOMINIU 4488 +mrt_35hd_dualnas_e MACH_MRT_35HD_DUALNAS_E MRT_35HD_DUALNAS_E 4489 +kiwi MACH_KIWI KIWI 4490 +hw90496 MACH_HW90496 HW90496 4491 +mep2440 MACH_MEP2440 MEP2440 4492 +colibri_t30 MACH_COLIBRI_T30 COLIBRI_T30 4493 +cwv1 MACH_CWV1 CWV1 4494 +nsa325 MACH_NSA325 NSA325 4495 +dpxmtc MACH_DPXMTC DPXMTC 4497 +tt_stuttgart MACH_TT_STUTTGART TT_STUTTGART 4498 +miranda_apcii MACH_MIRANDA_APCII MIRANDA_APCII 4499 +mx6q_moderox MACH_MX6Q_MODEROX MX6Q_MODEROX 4500 +mudskipper MACH_MUDSKIPPER MUDSKIPPER 4501 +urania MACH_URANIA URANIA 4502 +stm_b2112 MACH_STM_B2112 STM_B2112 4503 +mx6q_ats_phoenix MACH_MX6Q_ATS_PHOENIX MX6Q_ATS_PHOENIX 4505 +stm_b2116 MACH_STM_B2116 STM_B2116 4506 +mythology MACH_MYTHOLOGY MYTHOLOGY 4507 +fc360v1 MACH_FC360V1 FC360V1 4508 +gps_sensor MACH_GPS_SENSOR GPS_SENSOR 4509 +gazelle MACH_GAZELLE GAZELLE 4510 +mpq8064_dma MACH_MPQ8064_DMA MPQ8064_DMA 4511 +wems_asd01 MACH_WEMS_ASD01 WEMS_ASD01 4512 +apalis_t30 MACH_APALIS_T30 APALIS_T30 4513 +armstonea9 MACH_ARMSTONEA9 ARMSTONEA9 4515 +omap_blazetablet MACH_OMAP_BLAZETABLET OMAP_BLAZETABLET 4516 +ar6mxq MACH_AR6MXQ AR6MXQ 4517 +ar6mxs MACH_AR6MXS AR6MXS 4518 +gwventana MACH_GWVENTANA GWVENTANA 4520 +igep0033 MACH_IGEP0033 IGEP0033 4521 +h52c1_concerto MACH_H52C1_CONCERTO H52C1_CONCERTO 4524 +fcmbrd MACH_FCMBRD FCMBRD 4525 +pcaaxs1 MACH_PCAAXS1 PCAAXS1 4526 +ls_orca MACH_LS_ORCA LS_ORCA 4527 +pcm051lb MACH_PCM051LB PCM051LB 4528 +mx6s_lp507_gvci MACH_MX6S_LP507_GVCI MX6S_LP507_GVCI 4529 +dido MACH_DIDO DIDO 4530 +swarco_itc3_9g20 MACH_SWARCO_ITC3_9G20 SWARCO_ITC3_9G20 4531 +robo_roady MACH_ROBO_ROADY ROBO_ROADY 4532 +rskrza1 MACH_RSKRZA1 RSKRZA1 4533 +swarco_sid MACH_SWARCO_SID SWARCO_SID 4534 +mx6_iwg15s_sbc MACH_MX6_IWG15S_SBC MX6_IWG15S_SBC 4535 +mx6q_camaro MACH_MX6Q_CAMARO MX6Q_CAMARO 4536 +hb6mxs MACH_HB6MXS HB6MXS 4537 +lager MACH_LAGER LAGER 4538 +lp8x4x MACH_LP8X4X LP8X4X 4539 +tegratab7 MACH_TEGRATAB7 TEGRATAB7 4540 +andromeda MACH_ANDROMEDA ANDROMEDA 4541 +bootes MACH_BOOTES BOOTES 4542 +nethmi MACH_NETHMI NETHMI 4543 +tegratab MACH_TEGRATAB TEGRATAB 4544 +som5_evb MACH_SOM5_EVB SOM5_EVB 4545 +venaticorum MACH_VENATICORUM VENATICORUM 4546 +stm_b2110 MACH_STM_B2110 STM_B2110 4547 +elux_hathor MACH_ELUX_HATHOR ELUX_HATHOR 4548 +helios_v7 MACH_HELIOS_V7 HELIOS_V7 4549 +xc10v1 MACH_XC10V1 XC10V1 4550 +cp2u MACH_CP2U CP2U 4551 +iap_f MACH_IAP_F IAP_F 4552 +iap_g MACH_IAP_G IAP_G 4553 +aae MACH_AAE AAE 4554 +pegasus MACH_PEGASUS PEGASUS 4555 +cygnus MACH_CYGNUS CYGNUS 4556 +centaurus MACH_CENTAURUS CENTAURUS 4557 +msm8930_qrd8930 MACH_MSM8930_QRD8930 MSM8930_QRD8930 4558 +quby_tim MACH_QUBY_TIM QUBY_TIM 4559 +zedi3250a MACH_ZEDI3250A ZEDI3250A 4560 +grus MACH_GRUS GRUS 4561 +apollo3 MACH_APOLLO3 APOLLO3 4562 +cowon_r7 MACH_COWON_R7 COWON_R7 4563 +tonga3 MACH_TONGA3 TONGA3 4564 +p535 MACH_P535 P535 4565 +sa3874i MACH_SA3874I SA3874I 4566 +mx6_navico_com MACH_MX6_NAVICO_COM MX6_NAVICO_COM 4567 +proxmobil2 MACH_PROXMOBIL2 PROXMOBIL2 4568 +ubinux1 MACH_UBINUX1 UBINUX1 4569 +istos MACH_ISTOS ISTOS 4570 +benvolio4 MACH_BENVOLIO4 BENVOLIO4 4571 +eco5_bx2 MACH_ECO5_BX2 ECO5_BX2 4572 +eukrea_cpuimx28sd MACH_EUKREA_CPUIMX28SD EUKREA_CPUIMX28SD 4573 +domotab MACH_DOMOTAB DOMOTAB 4574 +pfla03 MACH_PFLA03 PFLA03 4575 diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c index 8dc0605a9ce9..d30042e39974 100644 --- a/arch/arm/xen/enlighten.c +++ b/arch/arm/xen/enlighten.c @@ -2,6 +2,7 @@ #include <xen/events.h> #include <xen/grant_table.h> #include <xen/hvm.h> +#include <xen/interface/vcpu.h> #include <xen/interface/xen.h> #include <xen/interface/memory.h> #include <xen/interface/hvm/params.h> @@ -9,9 +10,11 @@ #include <xen/platform_pci.h> #include <xen/xenbus.h> #include <xen/page.h> +#include <xen/interface/sched.h> #include <xen/xen-ops.h> #include <asm/xen/hypervisor.h> #include <asm/xen/hypercall.h> +#include <asm/system_misc.h> #include <linux/interrupt.h> #include <linux/irqreturn.h> #include <linux/module.h> @@ -32,6 +35,7 @@ struct shared_info xen_dummy_shared_info; struct shared_info *HYPERVISOR_shared_info = (void *)&xen_dummy_shared_info; DEFINE_PER_CPU(struct vcpu_info *, xen_vcpu); +static struct vcpu_info __percpu *xen_vcpu_info; /* These are unused until we support booting "pre-ballooned" */ unsigned long xen_released_pages; @@ -148,6 +152,47 @@ int xen_unmap_domain_mfn_range(struct vm_area_struct *vma, } EXPORT_SYMBOL_GPL(xen_unmap_domain_mfn_range); +static int __init xen_secondary_init(unsigned int cpu) +{ + struct vcpu_register_vcpu_info info; + struct vcpu_info *vcpup; + int err; + + pr_info("Xen: initializing cpu%d\n", cpu); + vcpup = per_cpu_ptr(xen_vcpu_info, cpu); + + info.mfn = __pa(vcpup) >> PAGE_SHIFT; + info.offset = offset_in_page(vcpup); + + err = HYPERVISOR_vcpu_op(VCPUOP_register_vcpu_info, cpu, &info); + if (err) { + pr_debug("register_vcpu_info failed: err=%d\n", err); + } else { + /* This cpu is using the registered vcpu info, even if + later ones fail to. */ + per_cpu(xen_vcpu, cpu) = vcpup; + } + return 0; +} + +static void xen_restart(char str, const char *cmd) +{ + struct sched_shutdown r = { .reason = SHUTDOWN_reboot }; + int rc; + rc = HYPERVISOR_sched_op(SCHEDOP_shutdown, &r); + if (rc) + BUG(); +} + +static void xen_power_off(void) +{ + struct sched_shutdown r = { .reason = SHUTDOWN_poweroff }; + int rc; + rc = HYPERVISOR_sched_op(SCHEDOP_shutdown, &r); + if (rc) + BUG(); +} + /* * see Documentation/devicetree/bindings/arm/xen.txt for the * documentation of the Xen Device Tree format. @@ -163,6 +208,7 @@ static int __init xen_guest_init(void) const char *version = NULL; const char *xen_prefix = "xen,xen-"; struct resource res; + int i; node = of_find_compatible_node(NULL, NULL, "xen,xen"); if (!node) { @@ -209,18 +255,26 @@ static int __init xen_guest_init(void) /* xen_vcpu is a pointer to the vcpu_info struct in the shared_info * page, we use it in the event channel upcall and in some pvclock - * related functions. We don't need the vcpu_info placement - * optimizations because we don't use any pv_mmu or pv_irq op on - * HVM. + * related functions. * The shared info contains exactly 1 CPU (the boot CPU). The guest * is required to use VCPUOP_register_vcpu_info to place vcpu info - * for secondary CPUs as they are brought up. */ - per_cpu(xen_vcpu, 0) = &HYPERVISOR_shared_info->vcpu_info[0]; + * for secondary CPUs as they are brought up. + * For uniformity we use VCPUOP_register_vcpu_info even on cpu0. + */ + xen_vcpu_info = __alloc_percpu(sizeof(struct vcpu_info), + sizeof(struct vcpu_info)); + if (xen_vcpu_info == NULL) + return -ENOMEM; + for_each_online_cpu(i) + xen_secondary_init(i); gnttab_init(); if (!xen_initial_domain()) xenbus_probe(NULL); + pm_power_off = xen_power_off; + arm_pm_restart = xen_restart; + return 0; } core_initcall(xen_guest_init); @@ -231,6 +285,11 @@ static irqreturn_t xen_arm_callback(int irq, void *arg) return IRQ_HANDLED; } +static __init void xen_percpu_enable_events(void *unused) +{ + enable_percpu_irq(xen_events_irq, 0); +} + static int __init xen_init_events(void) { if (!xen_domain() || xen_events_irq < 0) @@ -239,12 +298,12 @@ static int __init xen_init_events(void) xen_init_IRQ(); if (request_percpu_irq(xen_events_irq, xen_arm_callback, - "events", xen_vcpu)) { + "events", &xen_vcpu)) { pr_err("Error requesting IRQ %d\n", xen_events_irq); return -EINVAL; } - enable_percpu_irq(xen_events_irq, 0); + on_each_cpu(xen_percpu_enable_events, NULL, 0); return 0; } @@ -259,4 +318,5 @@ EXPORT_SYMBOL_GPL(HYPERVISOR_sched_op); EXPORT_SYMBOL_GPL(HYPERVISOR_hvm_op); EXPORT_SYMBOL_GPL(HYPERVISOR_memory_op); EXPORT_SYMBOL_GPL(HYPERVISOR_physdev_op); +EXPORT_SYMBOL_GPL(HYPERVISOR_vcpu_op); EXPORT_SYMBOL_GPL(privcmd_call); diff --git a/arch/arm/xen/hypercall.S b/arch/arm/xen/hypercall.S index 71f723984cbd..199cb2da7663 100644 --- a/arch/arm/xen/hypercall.S +++ b/arch/arm/xen/hypercall.S @@ -87,6 +87,7 @@ HYPERCALL2(event_channel_op); HYPERCALL2(hvm_op); HYPERCALL2(memory_op); HYPERCALL2(physdev_op); +HYPERCALL3(vcpu_op); ENTRY(privcmd_call) stmdb sp!, {r4} |