diff options
Diffstat (limited to 'arch/arm')
121 files changed, 787 insertions, 2589 deletions
diff --git a/arch/arm/configs/mmp2_defconfig b/arch/arm/configs/mmp2_defconfig index 47ad3b1a4fee..5a584520db2f 100644 --- a/arch/arm/configs/mmp2_defconfig +++ b/arch/arm/configs/mmp2_defconfig @@ -8,6 +8,7 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set CONFIG_ARCH_MMP=y +CONFIG_MACH_BROWNSTONE=y CONFIG_MACH_FLINT=y CONFIG_MACH_MARVELL_JASPER=y CONFIG_HIGH_RES_TIMERS=y @@ -63,10 +64,16 @@ CONFIG_BACKLIGHT_MAX8925=y # CONFIG_USB_SUPPORT is not set CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_MAX8925=y +CONFIG_MMC=y # CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y +CONFIG_EXT2_FS=y +CONFIG_EXT3_FS=y +CONFIG_EXT4_FS=y +CONFIG_MSDOS_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_JFFS2_FS=y CONFIG_CRAMFS=y CONFIG_NFS_FS=y @@ -81,7 +88,7 @@ CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_PREEMPT is not set CONFIG_DEBUG_INFO=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_DYNAMIC_DEBUG=y +# CONFIG_DYNAMIC_DEBUG is not set CONFIG_DEBUG_USER=y CONFIG_DEBUG_ERRORS=y # CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/arch/arm/mach-at91/include/mach/at91_mci.h b/arch/arm/mach-at91/include/mach/at91_mci.h deleted file mode 100644 index 02182c16a022..000000000000 --- a/arch/arm/mach-at91/include/mach/at91_mci.h +++ /dev/null @@ -1,115 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91_mci.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * MultiMedia Card Interface (MCI) registers. - * Based on AT91RM9200 datasheet revision F. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_MCI_H -#define AT91_MCI_H - -#define AT91_MCI_CR 0x00 /* Control Register */ -#define AT91_MCI_MCIEN (1 << 0) /* Multi-Media Interface Enable */ -#define AT91_MCI_MCIDIS (1 << 1) /* Multi-Media Interface Disable */ -#define AT91_MCI_PWSEN (1 << 2) /* Power Save Mode Enable */ -#define AT91_MCI_PWSDIS (1 << 3) /* Power Save Mode Disable */ -#define AT91_MCI_SWRST (1 << 7) /* Software Reset */ - -#define AT91_MCI_MR 0x04 /* Mode Register */ -#define AT91_MCI_CLKDIV (0xff << 0) /* Clock Divider */ -#define AT91_MCI_PWSDIV (7 << 8) /* Power Saving Divider */ -#define AT91_MCI_RDPROOF (1 << 11) /* Read Proof Enable [SAM926[03] only] */ -#define AT91_MCI_WRPROOF (1 << 12) /* Write Proof Enable [SAM926[03] only] */ -#define AT91_MCI_PDCFBYTE (1 << 13) /* PDC Force Byte Transfer [SAM926[03] only] */ -#define AT91_MCI_PDCPADV (1 << 14) /* PDC Padding Value */ -#define AT91_MCI_PDCMODE (1 << 15) /* PDC-orientated Mode */ -#define AT91_MCI_BLKLEN (0xfff << 18) /* Data Block Length */ - -#define AT91_MCI_DTOR 0x08 /* Data Timeout Register */ -#define AT91_MCI_DTOCYC (0xf << 0) /* Data Timeout Cycle Number */ -#define AT91_MCI_DTOMUL (7 << 4) /* Data Timeout Multiplier */ -#define AT91_MCI_DTOMUL_1 (0 << 4) -#define AT91_MCI_DTOMUL_16 (1 << 4) -#define AT91_MCI_DTOMUL_128 (2 << 4) -#define AT91_MCI_DTOMUL_256 (3 << 4) -#define AT91_MCI_DTOMUL_1K (4 << 4) -#define AT91_MCI_DTOMUL_4K (5 << 4) -#define AT91_MCI_DTOMUL_64K (6 << 4) -#define AT91_MCI_DTOMUL_1M (7 << 4) - -#define AT91_MCI_SDCR 0x0c /* SD Card Register */ -#define AT91_MCI_SDCSEL (3 << 0) /* SD Card Selector */ -#define AT91_MCI_SDCBUS (1 << 7) /* 1-bit or 4-bit bus */ - -#define AT91_MCI_ARGR 0x10 /* Argument Register */ - -#define AT91_MCI_CMDR 0x14 /* Command Register */ -#define AT91_MCI_CMDNB (0x3f << 0) /* Command Number */ -#define AT91_MCI_RSPTYP (3 << 6) /* Response Type */ -#define AT91_MCI_RSPTYP_NONE (0 << 6) -#define AT91_MCI_RSPTYP_48 (1 << 6) -#define AT91_MCI_RSPTYP_136 (2 << 6) -#define AT91_MCI_SPCMD (7 << 8) /* Special Command */ -#define AT91_MCI_SPCMD_NONE (0 << 8) -#define AT91_MCI_SPCMD_INIT (1 << 8) -#define AT91_MCI_SPCMD_SYNC (2 << 8) -#define AT91_MCI_SPCMD_ICMD (4 << 8) -#define AT91_MCI_SPCMD_IRESP (5 << 8) -#define AT91_MCI_OPDCMD (1 << 11) /* Open Drain Command */ -#define AT91_MCI_MAXLAT (1 << 12) /* Max Latency for Command to Response */ -#define AT91_MCI_TRCMD (3 << 16) /* Transfer Command */ -#define AT91_MCI_TRCMD_NONE (0 << 16) -#define AT91_MCI_TRCMD_START (1 << 16) -#define AT91_MCI_TRCMD_STOP (2 << 16) -#define AT91_MCI_TRDIR (1 << 18) /* Transfer Direction */ -#define AT91_MCI_TRTYP (3 << 19) /* Transfer Type */ -#define AT91_MCI_TRTYP_BLOCK (0 << 19) -#define AT91_MCI_TRTYP_MULTIPLE (1 << 19) -#define AT91_MCI_TRTYP_STREAM (2 << 19) -#define AT91_MCI_TRTYP_SDIO_BYTE (4 << 19) -#define AT91_MCI_TRTYP_SDIO_BLOCK (5 << 19) - -#define AT91_MCI_BLKR 0x18 /* Block Register */ -#define AT91_MCI_BLKR_BCNT(n) ((0xffff & (n)) << 0) /* Block count */ -#define AT91_MCI_BLKR_BLKLEN(n) ((0xffff & (n)) << 16) /* Block length */ - -#define AT91_MCI_RSPR(n) (0x20 + ((n) * 4)) /* Response Registers 0-3 */ -#define AT91_MCR_RDR 0x30 /* Receive Data Register */ -#define AT91_MCR_TDR 0x34 /* Transmit Data Register */ - -#define AT91_MCI_SR 0x40 /* Status Register */ -#define AT91_MCI_CMDRDY (1 << 0) /* Command Ready */ -#define AT91_MCI_RXRDY (1 << 1) /* Receiver Ready */ -#define AT91_MCI_TXRDY (1 << 2) /* Transmit Ready */ -#define AT91_MCI_BLKE (1 << 3) /* Data Block Ended */ -#define AT91_MCI_DTIP (1 << 4) /* Data Transfer in Progress */ -#define AT91_MCI_NOTBUSY (1 << 5) /* Data Not Busy */ -#define AT91_MCI_ENDRX (1 << 6) /* End of RX Buffer */ -#define AT91_MCI_ENDTX (1 << 7) /* End fo TX Buffer */ -#define AT91_MCI_SDIOIRQA (1 << 8) /* SDIO Interrupt for Slot A */ -#define AT91_MCI_SDIOIRQB (1 << 9) /* SDIO Interrupt for Slot B */ -#define AT91_MCI_RXBUFF (1 << 14) /* RX Buffer Full */ -#define AT91_MCI_TXBUFE (1 << 15) /* TX Buffer Empty */ -#define AT91_MCI_RINDE (1 << 16) /* Response Index Error */ -#define AT91_MCI_RDIRE (1 << 17) /* Response Direction Error */ -#define AT91_MCI_RCRCE (1 << 18) /* Response CRC Error */ -#define AT91_MCI_RENDE (1 << 19) /* Response End Bit Error */ -#define AT91_MCI_RTOE (1 << 20) /* Response Time-out Error */ -#define AT91_MCI_DCRCE (1 << 21) /* Data CRC Error */ -#define AT91_MCI_DTOE (1 << 22) /* Data Time-out Error */ -#define AT91_MCI_OVRE (1 << 30) /* Overrun */ -#define AT91_MCI_UNRE (1 << 31) /* Underrun */ - -#define AT91_MCI_IER 0x44 /* Interrupt Enable Register */ -#define AT91_MCI_IDR 0x48 /* Interrupt Disable Register */ -#define AT91_MCI_IMR 0x4c /* Interrupt Mask Register */ - -#endif diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index c67f684ee3e5..09a87e61ffcf 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -520,7 +520,7 @@ fail: */ if (have_imager()) { label = "HD imager"; - mux |= 1; + mux |= 2; /* externally mux MMC1/ENET/AIC33 to imager */ mux |= BIT(6) | BIT(5) | BIT(3); @@ -540,7 +540,7 @@ fail: resets &= ~BIT(1); if (have_tvp7002()) { - mux |= 2; + mux |= 1; resets &= ~BIT(2); label = "tvp7002 HD"; } else { diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c index 606a6f27ed6c..5f5d78308873 100644 --- a/arch/arm/mach-davinci/board-mityomapl138.c +++ b/arch/arm/mach-davinci/board-mityomapl138.c @@ -20,6 +20,7 @@ #include <linux/spi/spi.h> #include <linux/spi/flash.h> +#include <asm/io.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <mach/common.h> diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 1e0f809644bb..e00d61e2efbe 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -8,6 +8,7 @@ * is licensed "as is" without any warranty of any kind, whether express * or implied. */ +#include <linux/dma-mapping.h> #include <linux/init.h> #include <linux/clk.h> #include <linux/serial_8250.h> diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c index e7221398e5af..cafbe13a82a5 100644 --- a/arch/arm/mach-davinci/gpio.c +++ b/arch/arm/mach-davinci/gpio.c @@ -254,8 +254,10 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc) { struct davinci_gpio_regs __iomem *g; u32 mask = 0xffff; + struct davinci_gpio_controller *d; - g = (__force struct davinci_gpio_regs __iomem *) irq_desc_get_handler_data(desc); + d = (struct davinci_gpio_controller *)irq_desc_get_handler_data(desc); + g = (struct davinci_gpio_regs __iomem *)d->regs; /* we only care about one bank */ if (irq & 1) @@ -274,11 +276,14 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc) if (!status) break; __raw_writel(status, &g->intstat); - if (irq & 1) - status >>= 16; /* now demux them to the right lowlevel handler */ - n = (int)irq_get_handler_data(irq); + n = d->irq_base; + if (irq & 1) { + n += 16; + status >>= 16; + } + while (status) { res = ffs(status); n += res; @@ -424,7 +429,13 @@ static int __init davinci_gpio_irq_setup(void) /* set up all irqs in this bank */ irq_set_chained_handler(bank_irq, gpio_irq_handler); - irq_set_handler_data(bank_irq, (__force void *)g); + + /* + * Each chip handles 32 gpios, and each irq bank consists of 16 + * gpio irqs. Pass the irq bank's corresponding controller to + * the chained irq handler. + */ + irq_set_handler_data(bank_irq, &chips[gpio / 32]); for (i = 0; i < 16 && gpio < ngpio; i++, irq++, gpio++) { irq_set_chip(irq, &gpio_irqchip); diff --git a/arch/arm/mach-davinci/irq.c b/arch/arm/mach-davinci/irq.c index d8c1af025931..952dc126c390 100644 --- a/arch/arm/mach-davinci/irq.c +++ b/arch/arm/mach-davinci/irq.c @@ -52,6 +52,12 @@ davinci_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num) struct irq_chip_type *ct; gc = irq_alloc_generic_chip("AINTC", 1, irq_start, base, handle_edge_irq); + if (!gc) { + pr_err("%s: irq_alloc_generic_chip for IRQ %u failed\n", + __func__, irq_start); + return; + } + ct = gc->chip_types; ct->chip.irq_ack = irq_gc_ack_set_bit; ct->chip.irq_mask = irq_gc_mask_clr_bit; diff --git a/arch/arm/mach-davinci/pm.c b/arch/arm/mach-davinci/pm.c index 1bd73a04be20..04c49f7543ef 100644 --- a/arch/arm/mach-davinci/pm.c +++ b/arch/arm/mach-davinci/pm.c @@ -17,6 +17,7 @@ #include <asm/cacheflush.h> #include <asm/delay.h> +#include <asm/io.h> #include <mach/da8xx.h> #include <mach/sram.h> diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile index 33ee2c863d18..3cedcf2d39e5 100644 --- a/arch/arm/mach-ep93xx/Makefile +++ b/arch/arm/mach-ep93xx/Makefile @@ -1,11 +1,13 @@ # # Makefile for the linux kernel. # -obj-y := core.o clock.o dma-m2p.o gpio.o +obj-y := core.o clock.o obj-m := obj-n := obj- := +obj-$(CONFIG_EP93XX_DMA) += dma.o + obj-$(CONFIG_MACH_ADSSPHERE) += adssphere.o obj-$(CONFIG_MACH_EDB93XX) += edb93xx.o obj-$(CONFIG_MACH_GESBC9312) += gesbc9312.o diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 6659a0d137a3..c60f081e930b 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -174,14 +174,10 @@ struct sys_timer ep93xx_timer = { /************************************************************************* * EP93xx IRQ handling *************************************************************************/ -extern void ep93xx_gpio_init_irq(void); - void __init ep93xx_init_irq(void) { vic_init(EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK, 0); vic_init(EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK, 0); - - ep93xx_gpio_init_irq(); } @@ -241,6 +237,24 @@ unsigned int ep93xx_chip_revision(void) } /************************************************************************* + * EP93xx GPIO + *************************************************************************/ +static struct resource ep93xx_gpio_resource[] = { + { + .start = EP93XX_GPIO_PHYS_BASE, + .end = EP93XX_GPIO_PHYS_BASE + 0xcc - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device ep93xx_gpio_device = { + .name = "gpio-ep93xx", + .id = -1, + .num_resources = ARRAY_SIZE(ep93xx_gpio_resource), + .resource = ep93xx_gpio_resource, +}; + +/************************************************************************* * EP93xx peripheral handling *************************************************************************/ #define EP93XX_UART_MCR_OFFSET (0x0100) @@ -492,11 +506,15 @@ static struct resource ep93xx_spi_resources[] = { }, }; +static u64 ep93xx_spi_dma_mask = DMA_BIT_MASK(32); + static struct platform_device ep93xx_spi_device = { .name = "ep93xx-spi", .id = 0, .dev = { - .platform_data = &ep93xx_spi_master_data, + .platform_data = &ep93xx_spi_master_data, + .coherent_dma_mask = DMA_BIT_MASK(32), + .dma_mask = &ep93xx_spi_dma_mask, }, .num_resources = ARRAY_SIZE(ep93xx_spi_resources), .resource = ep93xx_spi_resources, @@ -870,14 +888,13 @@ void __init ep93xx_register_ac97(void) platform_device_register(&ep93xx_pcm_device); } -extern void ep93xx_gpio_init(void); - void __init ep93xx_init_devices(void) { /* Disallow access to MaverickCrunch initially */ ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_CPENA); - ep93xx_gpio_init(); + /* Get the GPIO working early, other devices need it */ + platform_device_register(&ep93xx_gpio_device); amba_device_register(&uart1_device, &iomem_resource); amba_device_register(&uart2_device, &iomem_resource); diff --git a/arch/arm/mach-ep93xx/dma-m2p.c b/arch/arm/mach-ep93xx/dma-m2p.c deleted file mode 100644 index a696d354b1f8..000000000000 --- a/arch/arm/mach-ep93xx/dma-m2p.c +++ /dev/null @@ -1,411 +0,0 @@ -/* - * arch/arm/mach-ep93xx/dma-m2p.c - * M2P DMA handling for Cirrus EP93xx chips. - * - * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org> - * Copyright (C) 2006 Applied Data Systems - * - * Copyright (C) 2009 Ryan Mallon <ryan@bluewatersys.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - */ - -/* - * On the EP93xx chip the following peripherals my be allocated to the 10 - * Memory to Internal Peripheral (M2P) channels (5 transmit + 5 receive). - * - * I2S contains 3 Tx and 3 Rx DMA Channels - * AAC contains 3 Tx and 3 Rx DMA Channels - * UART1 contains 1 Tx and 1 Rx DMA Channels - * UART2 contains 1 Tx and 1 Rx DMA Channels - * UART3 contains 1 Tx and 1 Rx DMA Channels - * IrDA contains 1 Tx and 1 Rx DMA Channels - * - * SSP and IDE use the Memory to Memory (M2M) channels and are not covered - * with this implementation. - */ - -#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt - -#include <linux/kernel.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/interrupt.h> -#include <linux/module.h> -#include <linux/io.h> - -#include <mach/dma.h> -#include <mach/hardware.h> - -#define M2P_CONTROL 0x00 -#define M2P_CONTROL_STALL_IRQ_EN (1 << 0) -#define M2P_CONTROL_NFB_IRQ_EN (1 << 1) -#define M2P_CONTROL_ERROR_IRQ_EN (1 << 3) -#define M2P_CONTROL_ENABLE (1 << 4) -#define M2P_INTERRUPT 0x04 -#define M2P_INTERRUPT_STALL (1 << 0) -#define M2P_INTERRUPT_NFB (1 << 1) -#define M2P_INTERRUPT_ERROR (1 << 3) -#define M2P_PPALLOC 0x08 -#define M2P_STATUS 0x0c -#define M2P_REMAIN 0x14 -#define M2P_MAXCNT0 0x20 -#define M2P_BASE0 0x24 -#define M2P_MAXCNT1 0x30 -#define M2P_BASE1 0x34 - -#define STATE_IDLE 0 /* Channel is inactive. */ -#define STATE_STALL 1 /* Channel is active, no buffers pending. */ -#define STATE_ON 2 /* Channel is active, one buffer pending. */ -#define STATE_NEXT 3 /* Channel is active, two buffers pending. */ - -struct m2p_channel { - char *name; - void __iomem *base; - int irq; - - struct clk *clk; - spinlock_t lock; - - void *client; - unsigned next_slot:1; - struct ep93xx_dma_buffer *buffer_xfer; - struct ep93xx_dma_buffer *buffer_next; - struct list_head buffers_pending; -}; - -static struct m2p_channel m2p_rx[] = { - {"m2p1", EP93XX_DMA_BASE + 0x0040, IRQ_EP93XX_DMAM2P1}, - {"m2p3", EP93XX_DMA_BASE + 0x00c0, IRQ_EP93XX_DMAM2P3}, - {"m2p5", EP93XX_DMA_BASE + 0x0200, IRQ_EP93XX_DMAM2P5}, - {"m2p7", EP93XX_DMA_BASE + 0x0280, IRQ_EP93XX_DMAM2P7}, - {"m2p9", EP93XX_DMA_BASE + 0x0300, IRQ_EP93XX_DMAM2P9}, - {NULL}, -}; - -static struct m2p_channel m2p_tx[] = { - {"m2p0", EP93XX_DMA_BASE + 0x0000, IRQ_EP93XX_DMAM2P0}, - {"m2p2", EP93XX_DMA_BASE + 0x0080, IRQ_EP93XX_DMAM2P2}, - {"m2p4", EP93XX_DMA_BASE + 0x0240, IRQ_EP93XX_DMAM2P4}, - {"m2p6", EP93XX_DMA_BASE + 0x02c0, IRQ_EP93XX_DMAM2P6}, - {"m2p8", EP93XX_DMA_BASE + 0x0340, IRQ_EP93XX_DMAM2P8}, - {NULL}, -}; - -static void feed_buf(struct m2p_channel *ch, struct ep93xx_dma_buffer *buf) -{ - if (ch->next_slot == 0) { - writel(buf->size, ch->base + M2P_MAXCNT0); - writel(buf->bus_addr, ch->base + M2P_BASE0); - } else { - writel(buf->size, ch->base + M2P_MAXCNT1); - writel(buf->bus_addr, ch->base + M2P_BASE1); - } - ch->next_slot ^= 1; -} - -static void choose_buffer_xfer(struct m2p_channel *ch) -{ - struct ep93xx_dma_buffer *buf; - - ch->buffer_xfer = NULL; - if (!list_empty(&ch->buffers_pending)) { - buf = list_entry(ch->buffers_pending.next, - struct ep93xx_dma_buffer, list); - list_del(&buf->list); - feed_buf(ch, buf); - ch->buffer_xfer = buf; - } -} - -static void choose_buffer_next(struct m2p_channel *ch) -{ - struct ep93xx_dma_buffer *buf; - - ch->buffer_next = NULL; - if (!list_empty(&ch->buffers_pending)) { - buf = list_entry(ch->buffers_pending.next, - struct ep93xx_dma_buffer, list); - list_del(&buf->list); - feed_buf(ch, buf); - ch->buffer_next = buf; - } -} - -static inline void m2p_set_control(struct m2p_channel *ch, u32 v) -{ - /* - * The control register must be read immediately after being written so - * that the internal state machine is correctly updated. See the ep93xx - * users' guide for details. - */ - writel(v, ch->base + M2P_CONTROL); - readl(ch->base + M2P_CONTROL); -} - -static inline int m2p_channel_state(struct m2p_channel *ch) -{ - return (readl(ch->base + M2P_STATUS) >> 4) & 0x3; -} - -static irqreturn_t m2p_irq(int irq, void *dev_id) -{ - struct m2p_channel *ch = dev_id; - struct ep93xx_dma_m2p_client *cl; - u32 irq_status, v; - int error = 0; - - cl = ch->client; - - spin_lock(&ch->lock); - irq_status = readl(ch->base + M2P_INTERRUPT); - - if (irq_status & M2P_INTERRUPT_ERROR) { - writel(M2P_INTERRUPT_ERROR, ch->base + M2P_INTERRUPT); - error = 1; - } - - if ((irq_status & (M2P_INTERRUPT_STALL | M2P_INTERRUPT_NFB)) == 0) { - spin_unlock(&ch->lock); - return IRQ_NONE; - } - - switch (m2p_channel_state(ch)) { - case STATE_IDLE: - pr_crit("dma interrupt without a dma buffer\n"); - BUG(); - break; - - case STATE_STALL: - cl->buffer_finished(cl->cookie, ch->buffer_xfer, 0, error); - if (ch->buffer_next != NULL) { - cl->buffer_finished(cl->cookie, ch->buffer_next, - 0, error); - } - choose_buffer_xfer(ch); - choose_buffer_next(ch); - if (ch->buffer_xfer != NULL) - cl->buffer_started(cl->cookie, ch->buffer_xfer); - break; - - case STATE_ON: - cl->buffer_finished(cl->cookie, ch->buffer_xfer, 0, error); - ch->buffer_xfer = ch->buffer_next; - choose_buffer_next(ch); - cl->buffer_started(cl->cookie, ch->buffer_xfer); - break; - - case STATE_NEXT: - pr_crit("dma interrupt while next\n"); - BUG(); - break; - } - - v = readl(ch->base + M2P_CONTROL) & ~(M2P_CONTROL_STALL_IRQ_EN | - M2P_CONTROL_NFB_IRQ_EN); - if (ch->buffer_xfer != NULL) - v |= M2P_CONTROL_STALL_IRQ_EN; - if (ch->buffer_next != NULL) - v |= M2P_CONTROL_NFB_IRQ_EN; - m2p_set_control(ch, v); - - spin_unlock(&ch->lock); - return IRQ_HANDLED; -} - -static struct m2p_channel *find_free_channel(struct ep93xx_dma_m2p_client *cl) -{ - struct m2p_channel *ch; - int i; - - if (cl->flags & EP93XX_DMA_M2P_RX) - ch = m2p_rx; - else - ch = m2p_tx; - - for (i = 0; ch[i].base; i++) { - struct ep93xx_dma_m2p_client *client; - - client = ch[i].client; - if (client != NULL) { - int port; - - port = cl->flags & EP93XX_DMA_M2P_PORT_MASK; - if (port == (client->flags & - EP93XX_DMA_M2P_PORT_MASK)) { - pr_warning("DMA channel already used by %s\n", - cl->name ? : "unknown client"); - return ERR_PTR(-EBUSY); - } - } - } - - for (i = 0; ch[i].base; i++) { - if (ch[i].client == NULL) - return ch + i; - } - - pr_warning("No free DMA channel for %s\n", - cl->name ? : "unknown client"); - return ERR_PTR(-ENODEV); -} - -static void channel_enable(struct m2p_channel *ch) -{ - struct ep93xx_dma_m2p_client *cl = ch->client; - u32 v; - - clk_enable(ch->clk); - - v = cl->flags & EP93XX_DMA_M2P_PORT_MASK; - writel(v, ch->base + M2P_PPALLOC); - - v = cl->flags & EP93XX_DMA_M2P_ERROR_MASK; - v |= M2P_CONTROL_ENABLE | M2P_CONTROL_ERROR_IRQ_EN; - m2p_set_control(ch, v); -} - -static void channel_disable(struct m2p_channel *ch) -{ - u32 v; - - v = readl(ch->base + M2P_CONTROL); - v &= ~(M2P_CONTROL_STALL_IRQ_EN | M2P_CONTROL_NFB_IRQ_EN); - m2p_set_control(ch, v); - - while (m2p_channel_state(ch) >= STATE_ON) - cpu_relax(); - - m2p_set_control(ch, 0x0); - - while (m2p_channel_state(ch) == STATE_STALL) - cpu_relax(); - - clk_disable(ch->clk); -} - -int ep93xx_dma_m2p_client_register(struct ep93xx_dma_m2p_client *cl) -{ - struct m2p_channel *ch; - int err; - - ch = find_free_channel(cl); - if (IS_ERR(ch)) - return PTR_ERR(ch); - - err = request_irq(ch->irq, m2p_irq, 0, cl->name ? : "dma-m2p", ch); - if (err) - return err; - - ch->client = cl; - ch->next_slot = 0; - ch->buffer_xfer = NULL; - ch->buffer_next = NULL; - INIT_LIST_HEAD(&ch->buffers_pending); - - cl->channel = ch; - - channel_enable(ch); - - return 0; -} -EXPORT_SYMBOL_GPL(ep93xx_dma_m2p_client_register); - -void ep93xx_dma_m2p_client_unregister(struct ep93xx_dma_m2p_client *cl) -{ - struct m2p_channel *ch = cl->channel; - - channel_disable(ch); - free_irq(ch->irq, ch); - ch->client = NULL; -} -EXPORT_SYMBOL_GPL(ep93xx_dma_m2p_client_unregister); - -void ep93xx_dma_m2p_submit(struct ep93xx_dma_m2p_client *cl, - struct ep93xx_dma_buffer *buf) -{ - struct m2p_channel *ch = cl->channel; - unsigned long flags; - u32 v; - - spin_lock_irqsave(&ch->lock, flags); - v = readl(ch->base + M2P_CONTROL); - if (ch->buffer_xfer == NULL) { - ch->buffer_xfer = buf; - feed_buf(ch, buf); - cl->buffer_started(cl->cookie, buf); - - v |= M2P_CONTROL_STALL_IRQ_EN; - m2p_set_control(ch, v); - - } else if (ch->buffer_next == NULL) { - ch->buffer_next = buf; - feed_buf(ch, buf); - - v |= M2P_CONTROL_NFB_IRQ_EN; - m2p_set_control(ch, v); - } else { - list_add_tail(&buf->list, &ch->buffers_pending); - } - spin_unlock_irqrestore(&ch->lock, flags); -} -EXPORT_SYMBOL_GPL(ep93xx_dma_m2p_submit); - -void ep93xx_dma_m2p_submit_recursive(struct ep93xx_dma_m2p_client *cl, - struct ep93xx_dma_buffer *buf) -{ - struct m2p_channel *ch = cl->channel; - - list_add_tail(&buf->list, &ch->buffers_pending); -} -EXPORT_SYMBOL_GPL(ep93xx_dma_m2p_submit_recursive); - -void ep93xx_dma_m2p_flush(struct ep93xx_dma_m2p_client *cl) -{ - struct m2p_channel *ch = cl->channel; - - channel_disable(ch); - ch->next_slot = 0; - ch->buffer_xfer = NULL; - ch->buffer_next = NULL; - INIT_LIST_HEAD(&ch->buffers_pending); - channel_enable(ch); -} -EXPORT_SYMBOL_GPL(ep93xx_dma_m2p_flush); - -static int init_channel(struct m2p_channel *ch) -{ - ch->clk = clk_get(NULL, ch->name); - if (IS_ERR(ch->clk)) - return PTR_ERR(ch->clk); - - spin_lock_init(&ch->lock); - ch->client = NULL; - - return 0; -} - -static int __init ep93xx_dma_m2p_init(void) -{ - int i; - int ret; - - for (i = 0; m2p_rx[i].base; i++) { - ret = init_channel(m2p_rx + i); - if (ret) - return ret; - } - - for (i = 0; m2p_tx[i].base; i++) { - ret = init_channel(m2p_tx + i); - if (ret) - return ret; - } - - pr_info("M2P DMA subsystem initialized\n"); - return 0; -} -arch_initcall(ep93xx_dma_m2p_init); diff --git a/arch/arm/mach-ep93xx/dma.c b/arch/arm/mach-ep93xx/dma.c new file mode 100644 index 000000000000..5a2570881255 --- /dev/null +++ b/arch/arm/mach-ep93xx/dma.c @@ -0,0 +1,108 @@ +/* + * arch/arm/mach-ep93xx/dma.c + * + * Platform support code for the EP93xx dmaengine driver. + * + * Copyright (C) 2011 Mika Westerberg + * + * This work is based on the original dma-m2p implementation with + * following copyrights: + * + * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org> + * Copyright (C) 2006 Applied Data Systems + * Copyright (C) 2009 Ryan Mallon <rmallon@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ + +#include <linux/dmaengine.h> +#include <linux/dma-mapping.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> + +#include <mach/dma.h> +#include <mach/hardware.h> + +#define DMA_CHANNEL(_name, _base, _irq) \ + { .name = (_name), .base = (_base), .irq = (_irq) } + +/* + * DMA M2P channels. + * + * On the EP93xx chip the following peripherals my be allocated to the 10 + * Memory to Internal Peripheral (M2P) channels (5 transmit + 5 receive). + * + * I2S contains 3 Tx and 3 Rx DMA Channels + * AAC contains 3 Tx and 3 Rx DMA Channels + * UART1 contains 1 Tx and 1 Rx DMA Channels + * UART2 contains 1 Tx and 1 Rx DMA Channels + * UART3 contains 1 Tx and 1 Rx DMA Channels + * IrDA contains 1 Tx and 1 Rx DMA Channels + * + * Registers are mapped statically in ep93xx_map_io(). + */ +static struct ep93xx_dma_chan_data ep93xx_dma_m2p_channels[] = { + DMA_CHANNEL("m2p0", EP93XX_DMA_BASE + 0x0000, IRQ_EP93XX_DMAM2P0), + DMA_CHANNEL("m2p1", EP93XX_DMA_BASE + 0x0040, IRQ_EP93XX_DMAM2P1), + DMA_CHANNEL("m2p2", EP93XX_DMA_BASE + 0x0080, IRQ_EP93XX_DMAM2P2), + DMA_CHANNEL("m2p3", EP93XX_DMA_BASE + 0x00c0, IRQ_EP93XX_DMAM2P3), + DMA_CHANNEL("m2p4", EP93XX_DMA_BASE + 0x0240, IRQ_EP93XX_DMAM2P4), + DMA_CHANNEL("m2p5", EP93XX_DMA_BASE + 0x0200, IRQ_EP93XX_DMAM2P5), + DMA_CHANNEL("m2p6", EP93XX_DMA_BASE + 0x02c0, IRQ_EP93XX_DMAM2P6), + DMA_CHANNEL("m2p7", EP93XX_DMA_BASE + 0x0280, IRQ_EP93XX_DMAM2P7), + DMA_CHANNEL("m2p8", EP93XX_DMA_BASE + 0x0340, IRQ_EP93XX_DMAM2P8), + DMA_CHANNEL("m2p9", EP93XX_DMA_BASE + 0x0300, IRQ_EP93XX_DMAM2P9), +}; + +static struct ep93xx_dma_platform_data ep93xx_dma_m2p_data = { + .channels = ep93xx_dma_m2p_channels, + .num_channels = ARRAY_SIZE(ep93xx_dma_m2p_channels), +}; + +static struct platform_device ep93xx_dma_m2p_device = { + .name = "ep93xx-dma-m2p", + .id = -1, + .dev = { + .platform_data = &ep93xx_dma_m2p_data, + }, +}; + +/* + * DMA M2M channels. + * + * There are 2 M2M channels which support memcpy/memset and in addition simple + * hardware requests from/to SSP and IDE. We do not implement an external + * hardware requests. + * + * Registers are mapped statically in ep93xx_map_io(). + */ +static struct ep93xx_dma_chan_data ep93xx_dma_m2m_channels[] = { + DMA_CHANNEL("m2m0", EP93XX_DMA_BASE + 0x0100, IRQ_EP93XX_DMAM2M0), + DMA_CHANNEL("m2m1", EP93XX_DMA_BASE + 0x0140, IRQ_EP93XX_DMAM2M1), +}; + +static struct ep93xx_dma_platform_data ep93xx_dma_m2m_data = { + .channels = ep93xx_dma_m2m_channels, + .num_channels = ARRAY_SIZE(ep93xx_dma_m2m_channels), +}; + +static struct platform_device ep93xx_dma_m2m_device = { + .name = "ep93xx-dma-m2m", + .id = -1, + .dev = { + .platform_data = &ep93xx_dma_m2m_data, + }, +}; + +static int __init ep93xx_dma_init(void) +{ + platform_device_register(&ep93xx_dma_m2p_device); + platform_device_register(&ep93xx_dma_m2m_device); + return 0; +} +arch_initcall(ep93xx_dma_init); diff --git a/arch/arm/mach-ep93xx/gpio.c b/arch/arm/mach-ep93xx/gpio.c deleted file mode 100644 index 415dce37b88c..000000000000 --- a/arch/arm/mach-ep93xx/gpio.c +++ /dev/null @@ -1,410 +0,0 @@ -/* - * linux/arch/arm/mach-ep93xx/gpio.c - * - * Generic EP93xx GPIO handling - * - * Copyright (c) 2008 Ryan Mallon <ryan@bluewatersys.com> - * - * Based on code originally from: - * linux/arch/arm/mach-ep93xx/core.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/seq_file.h> -#include <linux/io.h> -#include <linux/gpio.h> -#include <linux/irq.h> - -#include <mach/hardware.h> - -/************************************************************************* - * Interrupt handling for EP93xx on-chip GPIOs - *************************************************************************/ -static unsigned char gpio_int_unmasked[3]; -static unsigned char gpio_int_enabled[3]; -static unsigned char gpio_int_type1[3]; -static unsigned char gpio_int_type2[3]; -static unsigned char gpio_int_debounce[3]; - -/* Port ordering is: A B F */ -static const u8 int_type1_register_offset[3] = { 0x90, 0xac, 0x4c }; -static const u8 int_type2_register_offset[3] = { 0x94, 0xb0, 0x50 }; -static const u8 eoi_register_offset[3] = { 0x98, 0xb4, 0x54 }; -static const u8 int_en_register_offset[3] = { 0x9c, 0xb8, 0x58 }; -static const u8 int_debounce_register_offset[3] = { 0xa8, 0xc4, 0x64 }; - -static void ep93xx_gpio_update_int_params(unsigned port) -{ - BUG_ON(port > 2); - - __raw_writeb(0, EP93XX_GPIO_REG(int_en_register_offset[port])); - - __raw_writeb(gpio_int_type2[port], - EP93XX_GPIO_REG(int_type2_register_offset[port])); - - __raw_writeb(gpio_int_type1[port], - EP93XX_GPIO_REG(int_type1_register_offset[port])); - - __raw_writeb(gpio_int_unmasked[port] & gpio_int_enabled[port], - EP93XX_GPIO_REG(int_en_register_offset[port])); -} - -static inline void ep93xx_gpio_int_mask(unsigned line) -{ - gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7)); -} - -static void ep93xx_gpio_int_debounce(unsigned int irq, bool enable) -{ - int line = irq_to_gpio(irq); - int port = line >> 3; - int port_mask = 1 << (line & 7); - - if (enable) - gpio_int_debounce[port] |= port_mask; - else - gpio_int_debounce[port] &= ~port_mask; - - __raw_writeb(gpio_int_debounce[port], - EP93XX_GPIO_REG(int_debounce_register_offset[port])); -} - -static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - unsigned char status; - int i; - - status = __raw_readb(EP93XX_GPIO_A_INT_STATUS); - for (i = 0; i < 8; i++) { - if (status & (1 << i)) { - int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_A(0)) + i; - generic_handle_irq(gpio_irq); - } - } - - status = __raw_readb(EP93XX_GPIO_B_INT_STATUS); - for (i = 0; i < 8; i++) { - if (status & (1 << i)) { - int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_B(0)) + i; - generic_handle_irq(gpio_irq); - } - } -} - -static void ep93xx_gpio_f_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - /* - * map discontiguous hw irq range to continuous sw irq range: - * - * IRQ_EP93XX_GPIO{0..7}MUX -> gpio_to_irq(EP93XX_GPIO_LINE_F({0..7}) - */ - int port_f_idx = ((irq + 1) & 7) ^ 4; /* {19..22,47..50} -> {0..7} */ - int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_F(0)) + port_f_idx; - - generic_handle_irq(gpio_irq); -} - -static void ep93xx_gpio_irq_ack(struct irq_data *d) -{ - int line = irq_to_gpio(d->irq); - int port = line >> 3; - int port_mask = 1 << (line & 7); - - if (irqd_get_trigger_type(d) == IRQ_TYPE_EDGE_BOTH) { - gpio_int_type2[port] ^= port_mask; /* switch edge direction */ - ep93xx_gpio_update_int_params(port); - } - - __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port])); -} - -static void ep93xx_gpio_irq_mask_ack(struct irq_data *d) -{ - int line = irq_to_gpio(d->irq); - int port = line >> 3; - int port_mask = 1 << (line & 7); - - if (irqd_get_trigger_type(d) == IRQ_TYPE_EDGE_BOTH) - gpio_int_type2[port] ^= port_mask; /* switch edge direction */ - - gpio_int_unmasked[port] &= ~port_mask; - ep93xx_gpio_update_int_params(port); - - __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port])); -} - -static void ep93xx_gpio_irq_mask(struct irq_data *d) -{ - int line = irq_to_gpio(d->irq); - int port = line >> 3; - - gpio_int_unmasked[port] &= ~(1 << (line & 7)); - ep93xx_gpio_update_int_params(port); -} - -static void ep93xx_gpio_irq_unmask(struct irq_data *d) -{ - int line = irq_to_gpio(d->irq); - int port = line >> 3; - - gpio_int_unmasked[port] |= 1 << (line & 7); - ep93xx_gpio_update_int_params(port); -} - -/* - * gpio_int_type1 controls whether the interrupt is level (0) or - * edge (1) triggered, while gpio_int_type2 controls whether it - * triggers on low/falling (0) or high/rising (1). - */ -static int ep93xx_gpio_irq_type(struct irq_data *d, unsigned int type) -{ - const int gpio = irq_to_gpio(d->irq); - const int port = gpio >> 3; - const int port_mask = 1 << (gpio & 7); - irq_flow_handler_t handler; - - gpio_direction_input(gpio); - - switch (type) { - case IRQ_TYPE_EDGE_RISING: - gpio_int_type1[port] |= port_mask; - gpio_int_type2[port] |= port_mask; - handler = handle_edge_irq; - break; - case IRQ_TYPE_EDGE_FALLING: - gpio_int_type1[port] |= port_mask; - gpio_int_type2[port] &= ~port_mask; - handler = handle_edge_irq; - break; - case IRQ_TYPE_LEVEL_HIGH: - gpio_int_type1[port] &= ~port_mask; - gpio_int_type2[port] |= port_mask; - handler = handle_level_irq; - break; - case IRQ_TYPE_LEVEL_LOW: - gpio_int_type1[port] &= ~port_mask; - gpio_int_type2[port] &= ~port_mask; - handler = handle_level_irq; - break; - case IRQ_TYPE_EDGE_BOTH: - gpio_int_type1[port] |= port_mask; - /* set initial polarity based on current input level */ - if (gpio_get_value(gpio)) - gpio_int_type2[port] &= ~port_mask; /* falling */ - else - gpio_int_type2[port] |= port_mask; /* rising */ - handler = handle_edge_irq; - break; - default: - pr_err("failed to set irq type %d for gpio %d\n", type, gpio); - return -EINVAL; - } - - __irq_set_handler_locked(d->irq, handler); - - gpio_int_enabled[port] |= port_mask; - - ep93xx_gpio_update_int_params(port); - - return 0; -} - -static struct irq_chip ep93xx_gpio_irq_chip = { - .name = "GPIO", - .irq_ack = ep93xx_gpio_irq_ack, - .irq_mask_ack = ep93xx_gpio_irq_mask_ack, - .irq_mask = ep93xx_gpio_irq_mask, - .irq_unmask = ep93xx_gpio_irq_unmask, - .irq_set_type = ep93xx_gpio_irq_type, -}; - -void __init ep93xx_gpio_init_irq(void) -{ - int gpio_irq; - - for (gpio_irq = gpio_to_irq(0); - gpio_irq <= gpio_to_irq(EP93XX_GPIO_LINE_MAX_IRQ); ++gpio_irq) { - irq_set_chip_and_handler(gpio_irq, &ep93xx_gpio_irq_chip, - handle_level_irq); - set_irq_flags(gpio_irq, IRQF_VALID); - } - - irq_set_chained_handler(IRQ_EP93XX_GPIO_AB, - ep93xx_gpio_ab_irq_handler); - irq_set_chained_handler(IRQ_EP93XX_GPIO0MUX, - ep93xx_gpio_f_irq_handler); - irq_set_chained_handler(IRQ_EP93XX_GPIO1MUX, - ep93xx_gpio_f_irq_handler); - irq_set_chained_handler(IRQ_EP93XX_GPIO2MUX, - ep93xx_gpio_f_irq_handler); - irq_set_chained_handler(IRQ_EP93XX_GPIO3MUX, - ep93xx_gpio_f_irq_handler); - irq_set_chained_handler(IRQ_EP93XX_GPIO4MUX, - ep93xx_gpio_f_irq_handler); - irq_set_chained_handler(IRQ_EP93XX_GPIO5MUX, - ep93xx_gpio_f_irq_handler); - irq_set_chained_handler(IRQ_EP93XX_GPIO6MUX, - ep93xx_gpio_f_irq_handler); - irq_set_chained_handler(IRQ_EP93XX_GPIO7MUX, - ep93xx_gpio_f_irq_handler); -} - - -/************************************************************************* - * gpiolib interface for EP93xx on-chip GPIOs - *************************************************************************/ -struct ep93xx_gpio_chip { - struct gpio_chip chip; - - void __iomem *data_reg; - void __iomem *data_dir_reg; -}; - -#define to_ep93xx_gpio_chip(c) container_of(c, struct ep93xx_gpio_chip, chip) - -static int ep93xx_gpio_direction_input(struct gpio_chip *chip, unsigned offset) -{ - struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip); - unsigned long flags; - u8 v; - - local_irq_save(flags); - v = __raw_readb(ep93xx_chip->data_dir_reg); - v &= ~(1 << offset); - __raw_writeb(v, ep93xx_chip->data_dir_reg); - local_irq_restore(flags); - - return 0; -} - -static int ep93xx_gpio_direction_output(struct gpio_chip *chip, - unsigned offset, int val) -{ - struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip); - unsigned long flags; - int line; - u8 v; - - local_irq_save(flags); - - /* Set the value */ - v = __raw_readb(ep93xx_chip->data_reg); - if (val) - v |= (1 << offset); - else - v &= ~(1 << offset); - __raw_writeb(v, ep93xx_chip->data_reg); - - /* Drive as an output */ - line = chip->base + offset; - if (line <= EP93XX_GPIO_LINE_MAX_IRQ) { - /* Ports A/B/F */ - ep93xx_gpio_int_mask(line); - ep93xx_gpio_update_int_params(line >> 3); - } - - v = __raw_readb(ep93xx_chip->data_dir_reg); - v |= (1 << offset); - __raw_writeb(v, ep93xx_chip->data_dir_reg); - - local_irq_restore(flags); - - return 0; -} - -static int ep93xx_gpio_get(struct gpio_chip *chip, unsigned offset) -{ - struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip); - - return !!(__raw_readb(ep93xx_chip->data_reg) & (1 << offset)); -} - -static void ep93xx_gpio_set(struct gpio_chip *chip, unsigned offset, int val) -{ - struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip); - unsigned long flags; - u8 v; - - local_irq_save(flags); - v = __raw_readb(ep93xx_chip->data_reg); - if (val) - v |= (1 << offset); - else - v &= ~(1 << offset); - __raw_writeb(v, ep93xx_chip->data_reg); - local_irq_restore(flags); -} - -static int ep93xx_gpio_set_debounce(struct gpio_chip *chip, - unsigned offset, unsigned debounce) -{ - int gpio = chip->base + offset; - int irq = gpio_to_irq(gpio); - - if (irq < 0) - return -EINVAL; - - ep93xx_gpio_int_debounce(irq, debounce ? true : false); - - return 0; -} - -#define EP93XX_GPIO_BANK(name, dr, ddr, base_gpio) \ - { \ - .chip = { \ - .label = name, \ - .direction_input = ep93xx_gpio_direction_input, \ - .direction_output = ep93xx_gpio_direction_output, \ - .get = ep93xx_gpio_get, \ - .set = ep93xx_gpio_set, \ - .base = base_gpio, \ - .ngpio = 8, \ - }, \ - .data_reg = EP93XX_GPIO_REG(dr), \ - .data_dir_reg = EP93XX_GPIO_REG(ddr), \ - } - -static struct ep93xx_gpio_chip ep93xx_gpio_banks[] = { - EP93XX_GPIO_BANK("A", 0x00, 0x10, 0), - EP93XX_GPIO_BANK("B", 0x04, 0x14, 8), - EP93XX_GPIO_BANK("C", 0x08, 0x18, 40), - EP93XX_GPIO_BANK("D", 0x0c, 0x1c, 24), - EP93XX_GPIO_BANK("E", 0x20, 0x24, 32), - EP93XX_GPIO_BANK("F", 0x30, 0x34, 16), - EP93XX_GPIO_BANK("G", 0x38, 0x3c, 48), - EP93XX_GPIO_BANK("H", 0x40, 0x44, 56), -}; - -void __init ep93xx_gpio_init(void) -{ - int i; - - /* Set Ports C, D, E, G, and H for GPIO use */ - ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS | - EP93XX_SYSCON_DEVCFG_GONK | - EP93XX_SYSCON_DEVCFG_EONIDE | - EP93XX_SYSCON_DEVCFG_GONIDE | - EP93XX_SYSCON_DEVCFG_HONIDE); - - for (i = 0; i < ARRAY_SIZE(ep93xx_gpio_banks); i++) { - struct gpio_chip *chip = &ep93xx_gpio_banks[i].chip; - - /* - * Ports A, B, and F support input debouncing when - * used as interrupts. - */ - if (!strcmp(chip->label, "A") || - !strcmp(chip->label, "B") || - !strcmp(chip->label, "F")) - chip->set_debounce = ep93xx_gpio_set_debounce; - - gpiochip_add(chip); - } -} diff --git a/arch/arm/mach-ep93xx/include/mach/dma.h b/arch/arm/mach-ep93xx/include/mach/dma.h index 5e31b2b25da9..46d4d876e6fb 100644 --- a/arch/arm/mach-ep93xx/include/mach/dma.h +++ b/arch/arm/mach-ep93xx/include/mach/dma.h @@ -1,149 +1,93 @@ -/** - * DOC: EP93xx DMA M2P memory to peripheral and peripheral to memory engine - * - * The EP93xx DMA M2P subsystem handles DMA transfers between memory and - * peripherals. DMA M2P channels are available for audio, UARTs and IrDA. - * See chapter 10 of the EP93xx users guide for full details on the DMA M2P - * engine. - * - * See sound/soc/ep93xx/ep93xx-pcm.c for an example use of the DMA M2P code. - * - */ - #ifndef __ASM_ARCH_DMA_H #define __ASM_ARCH_DMA_H -#include <linux/list.h> #include <linux/types.h> +#include <linux/dmaengine.h> +#include <linux/dma-mapping.h> -/** - * struct ep93xx_dma_buffer - Information about a buffer to be transferred - * using the DMA M2P engine +/* + * M2P channels. * - * @list: Entry in DMA buffer list - * @bus_addr: Physical address of the buffer - * @size: Size of the buffer in bytes + * Note that these values are also directly used for setting the PPALLOC + * register. */ -struct ep93xx_dma_buffer { - struct list_head list; - u32 bus_addr; - u16 size; -}; +#define EP93XX_DMA_I2S1 0 +#define EP93XX_DMA_I2S2 1 +#define EP93XX_DMA_AAC1 2 +#define EP93XX_DMA_AAC2 3 +#define EP93XX_DMA_AAC3 4 +#define EP93XX_DMA_I2S3 5 +#define EP93XX_DMA_UART1 6 +#define EP93XX_DMA_UART2 7 +#define EP93XX_DMA_UART3 8 +#define EP93XX_DMA_IRDA 9 +/* M2M channels */ +#define EP93XX_DMA_SSP 10 +#define EP93XX_DMA_IDE 11 /** - * struct ep93xx_dma_m2p_client - Information about a DMA M2P client - * - * @name: Unique name for this client - * @flags: Client flags - * @cookie: User data to pass to callback functions - * @buffer_started: Non NULL function to call when a transfer is started. - * The arguments are the user data cookie and the DMA - * buffer which is starting. - * @buffer_finished: Non NULL function to call when a transfer is completed. - * The arguments are the user data cookie, the DMA buffer - * which has completed, and a boolean flag indicating if - * the transfer had an error. + * struct ep93xx_dma_data - configuration data for the EP93xx dmaengine + * @port: peripheral which is requesting the channel + * @direction: TX/RX channel + * @name: optional name for the channel, this is displayed in /proc/interrupts + * + * This information is passed as private channel parameter in a filter + * function. Note that this is only needed for slave/cyclic channels. For + * memcpy channels %NULL data should be passed. */ -struct ep93xx_dma_m2p_client { - char *name; - u8 flags; - void *cookie; - void (*buffer_started)(void *cookie, - struct ep93xx_dma_buffer *buf); - void (*buffer_finished)(void *cookie, - struct ep93xx_dma_buffer *buf, - int bytes, int error); - - /* private: Internal use only */ - void *channel; +struct ep93xx_dma_data { + int port; + enum dma_data_direction direction; + const char *name; }; -/* DMA M2P ports */ -#define EP93XX_DMA_M2P_PORT_I2S1 0x00 -#define EP93XX_DMA_M2P_PORT_I2S2 0x01 -#define EP93XX_DMA_M2P_PORT_AAC1 0x02 -#define EP93XX_DMA_M2P_PORT_AAC2 0x03 -#define EP93XX_DMA_M2P_PORT_AAC3 0x04 -#define EP93XX_DMA_M2P_PORT_I2S3 0x05 -#define EP93XX_DMA_M2P_PORT_UART1 0x06 -#define EP93XX_DMA_M2P_PORT_UART2 0x07 -#define EP93XX_DMA_M2P_PORT_UART3 0x08 -#define EP93XX_DMA_M2P_PORT_IRDA 0x09 -#define EP93XX_DMA_M2P_PORT_MASK 0x0f - -/* DMA M2P client flags */ -#define EP93XX_DMA_M2P_TX 0x00 /* Memory to peripheral */ -#define EP93XX_DMA_M2P_RX 0x10 /* Peripheral to memory */ - -/* - * DMA M2P client error handling flags. See the EP93xx users guide - * documentation on the DMA M2P CONTROL register for more details - */ -#define EP93XX_DMA_M2P_ABORT_ON_ERROR 0x20 /* Abort on peripheral error */ -#define EP93XX_DMA_M2P_IGNORE_ERROR 0x40 /* Ignore peripheral errors */ -#define EP93XX_DMA_M2P_ERROR_MASK 0x60 /* Mask of error bits */ - /** - * ep93xx_dma_m2p_client_register - Register a client with the DMA M2P - * subsystem - * - * @m2p: Client information to register - * returns 0 on success - * - * The DMA M2P subsystem allocates a channel and an interrupt line for the DMA - * client + * struct ep93xx_dma_chan_data - platform specific data for a DMA channel + * @name: name of the channel, used for getting the right clock for the channel + * @base: mapped registers + * @irq: interrupt number used by this channel */ -int ep93xx_dma_m2p_client_register(struct ep93xx_dma_m2p_client *m2p); +struct ep93xx_dma_chan_data { + const char *name; + void __iomem *base; + int irq; +}; /** - * ep93xx_dma_m2p_client_unregister - Unregister a client from the DMA M2P - * subsystem - * - * @m2p: Client to unregister + * struct ep93xx_dma_platform_data - platform data for the dmaengine driver + * @channels: array of channels which are passed to the driver + * @num_channels: number of channels in the array * - * Any transfers currently in progress will be completed in hardware, but - * ignored in software. + * This structure is passed to the DMA engine driver via platform data. For + * M2P channels, contract is that even channels are for TX and odd for RX. + * There is no requirement for the M2M channels. */ -void ep93xx_dma_m2p_client_unregister(struct ep93xx_dma_m2p_client *m2p); +struct ep93xx_dma_platform_data { + struct ep93xx_dma_chan_data *channels; + size_t num_channels; +}; -/** - * ep93xx_dma_m2p_submit - Submit a DMA M2P transfer - * - * @m2p: DMA Client to submit the transfer on - * @buf: DMA Buffer to submit - * - * If the current or next transfer positions are free on the M2P client then - * the transfer is started immediately. If not, the transfer is added to the - * list of pending transfers. This function must not be called from the - * buffer_finished callback for an M2P channel. - * - */ -void ep93xx_dma_m2p_submit(struct ep93xx_dma_m2p_client *m2p, - struct ep93xx_dma_buffer *buf); +static inline bool ep93xx_dma_chan_is_m2p(struct dma_chan *chan) +{ + return !strcmp(dev_name(chan->device->dev), "ep93xx-dma-m2p"); +} /** - * ep93xx_dma_m2p_submit_recursive - Put a DMA transfer on the pending list - * for an M2P channel + * ep93xx_dma_chan_direction - returns direction the channel can be used + * @chan: channel * - * @m2p: DMA Client to submit the transfer on - * @buf: DMA Buffer to submit - * - * This function must only be called from the buffer_finished callback for an - * M2P channel. It is commonly used to add the next transfer in a chained list - * of DMA transfers. + * This function can be used in filter functions to find out whether the + * channel supports given DMA direction. Only M2P channels have such + * limitation, for M2M channels the direction is configurable. */ -void ep93xx_dma_m2p_submit_recursive(struct ep93xx_dma_m2p_client *m2p, - struct ep93xx_dma_buffer *buf); +static inline enum dma_data_direction +ep93xx_dma_chan_direction(struct dma_chan *chan) +{ + if (!ep93xx_dma_chan_is_m2p(chan)) + return DMA_NONE; -/** - * ep93xx_dma_m2p_flush - Flush all pending transfers on a DMA M2P client - * - * @m2p: DMA client to flush transfers on - * - * Any transfers currently in progress will be completed in hardware, but - * ignored in software. - * - */ -void ep93xx_dma_m2p_flush(struct ep93xx_dma_m2p_client *m2p); + /* even channels are for TX, odd for RX */ + return (chan->chan_id % 2 == 0) ? DMA_TO_DEVICE : DMA_FROM_DEVICE; +} #endif /* __ASM_ARCH_DMA_H */ diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h index 9ac4d1055097..c4a7b84ef06d 100644 --- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h +++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h @@ -98,6 +98,7 @@ #define EP93XX_SECURITY_BASE EP93XX_APB_IOMEM(0x00030000) +#define EP93XX_GPIO_PHYS_BASE EP93XX_APB_PHYS(0x00040000) #define EP93XX_GPIO_BASE EP93XX_APB_IOMEM(0x00040000) #define EP93XX_GPIO_REG(x) (EP93XX_GPIO_BASE + (x)) #define EP93XX_GPIO_F_INT_STATUS EP93XX_GPIO_REG(0x5c) diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h b/arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h index 0a37961b3453..9bb63ac13f04 100644 --- a/arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h +++ b/arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h @@ -7,9 +7,11 @@ struct spi_device; * struct ep93xx_spi_info - EP93xx specific SPI descriptor * @num_chipselect: number of chip selects on this board, must be * at least one + * @use_dma: use DMA for the transfers */ struct ep93xx_spi_info { int num_chipselect; + bool use_dma; }; /** diff --git a/arch/arm/mach-imx/clock-imx25.c b/arch/arm/mach-imx/clock-imx25.c index a65838fc061c..af1c580b06bc 100644 --- a/arch/arm/mach-imx/clock-imx25.c +++ b/arch/arm/mach-imx/clock-imx25.c @@ -282,9 +282,10 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk) _REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk) _REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk) - _REGISTER_CLOCK("imx25-cspi.0", NULL, cspi1_clk) - _REGISTER_CLOCK("imx25-cspi.1", NULL, cspi2_clk) - _REGISTER_CLOCK("imx25-cspi.2", NULL, cspi3_clk) + /* i.mx25 has the i.mx35 type cspi */ + _REGISTER_CLOCK("imx35-cspi.0", NULL, cspi1_clk) + _REGISTER_CLOCK("imx35-cspi.1", NULL, cspi2_clk) + _REGISTER_CLOCK("imx35-cspi.2", NULL, cspi3_clk) _REGISTER_CLOCK("mxc_pwm.0", NULL, pwm1_clk) _REGISTER_CLOCK("mxc_pwm.1", NULL, pwm2_clk) _REGISTER_CLOCK("mxc_pwm.2", NULL, pwm3_clk) diff --git a/arch/arm/mach-imx/dma-v1.c b/arch/arm/mach-imx/dma-v1.c index 236f1495efad..f8aa5be0eb15 100644 --- a/arch/arm/mach-imx/dma-v1.c +++ b/arch/arm/mach-imx/dma-v1.c @@ -26,6 +26,7 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/interrupt.h> +#include <linux/err.h> #include <linux/errno.h> #include <linux/clk.h> #include <linux/scatterlist.h> diff --git a/arch/arm/mach-imx/mach-apf9328.c b/arch/arm/mach-imx/mach-apf9328.c index 15e45c84e371..59d2a3b137d9 100644 --- a/arch/arm/mach-imx/mach-apf9328.c +++ b/arch/arm/mach-imx/mach-apf9328.c @@ -115,6 +115,8 @@ static struct platform_device *devices[] __initdata = { static void __init apf9328_init(void) { + imx1_soc_init(); + mxc_gpio_setup_multiple_pins(apf9328_pins, ARRAY_SIZE(apf9328_pins), "APF9328"); diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c index ffb40ff619b1..ede2710f8b76 100644 --- a/arch/arm/mach-imx/mach-armadillo5x0.c +++ b/arch/arm/mach-imx/mach-armadillo5x0.c @@ -490,6 +490,8 @@ static struct platform_device *devices[] __initdata = { */ static void __init armadillo5x0_init(void) { + imx31_soc_init(); + mxc_iomux_setup_multiple_pins(armadillo5x0_pins, ARRAY_SIZE(armadillo5x0_pins), "armadillo5x0"); diff --git a/arch/arm/mach-imx/mach-bug.c b/arch/arm/mach-imx/mach-bug.c index 42e4f078a19c..f49470553bdf 100644 --- a/arch/arm/mach-imx/mach-bug.c +++ b/arch/arm/mach-imx/mach-bug.c @@ -42,6 +42,8 @@ static const unsigned int bug_pins[] __initconst = { static void __init bug_board_init(void) { + imx31_soc_init(); + mxc_iomux_setup_multiple_pins(bug_pins, ARRAY_SIZE(bug_pins), "uart-4"); imx31_add_imx_uart4(&uart_pdata); diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c index 46a2e41d43d2..87887ac5806b 100644 --- a/arch/arm/mach-imx/mach-cpuimx27.c +++ b/arch/arm/mach-imx/mach-cpuimx27.c @@ -250,6 +250,8 @@ __setup("otg_mode=", eukrea_cpuimx27_otg_mode); static void __init eukrea_cpuimx27_init(void) { + imx27_soc_init(); + mxc_gpio_setup_multiple_pins(eukrea_cpuimx27_pins, ARRAY_SIZE(eukrea_cpuimx27_pins), "CPUIMX27"); diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c index 3f8ef825fa6f..f39a478ba1a6 100644 --- a/arch/arm/mach-imx/mach-cpuimx35.c +++ b/arch/arm/mach-imx/mach-cpuimx35.c @@ -156,6 +156,8 @@ __setup("otg_mode=", eukrea_cpuimx35_otg_mode); */ static void __init eukrea_cpuimx35_init(void) { + imx35_soc_init(); + mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx35_pads, ARRAY_SIZE(eukrea_cpuimx35_pads)); diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c index 148cff2819b9..da36da52969d 100644 --- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c +++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c @@ -125,6 +125,8 @@ __setup("otg_mode=", eukrea_cpuimx25_otg_mode); static void __init eukrea_cpuimx25_init(void) { + imx25_soc_init(); + if (mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx25_pads, ARRAY_SIZE(eukrea_cpuimx25_pads))) printk(KERN_ERR "error setting cpuimx25 pads !\n"); diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c index 7ae43b1ec517..c6269d60ddbc 100644 --- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c +++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c @@ -231,6 +231,8 @@ static void __init visstrim_m10_board_init(void) { int ret; + imx27_soc_init(); + ret = mxc_gpio_setup_multiple_pins(visstrim_m10_pins, ARRAY_SIZE(visstrim_m10_pins), "VISSTRIM_M10"); if (ret) diff --git a/arch/arm/mach-imx/mach-imx27ipcam.c b/arch/arm/mach-imx/mach-imx27ipcam.c index 9be6cd6fbf8c..272f793e9247 100644 --- a/arch/arm/mach-imx/mach-imx27ipcam.c +++ b/arch/arm/mach-imx/mach-imx27ipcam.c @@ -50,6 +50,8 @@ static const int mx27ipcam_pins[] __initconst = { static void __init mx27ipcam_init(void) { + imx27_soc_init(); + mxc_gpio_setup_multiple_pins(mx27ipcam_pins, ARRAY_SIZE(mx27ipcam_pins), "mx27ipcam"); diff --git a/arch/arm/mach-imx/mach-imx27lite.c b/arch/arm/mach-imx/mach-imx27lite.c index 841140516ede..d81a769fe895 100644 --- a/arch/arm/mach-imx/mach-imx27lite.c +++ b/arch/arm/mach-imx/mach-imx27lite.c @@ -59,6 +59,8 @@ static const struct imxuart_platform_data uart_pdata __initconst = { static void __init mx27lite_init(void) { + imx27_soc_init(); + mxc_gpio_setup_multiple_pins(mx27lite_pins, ARRAY_SIZE(mx27lite_pins), "imx27lite"); imx27_add_imx_uart0(&uart_pdata); diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c index 1ecae20cf4e3..e472a1d88058 100644 --- a/arch/arm/mach-imx/mach-kzm_arm11_01.c +++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c @@ -223,6 +223,8 @@ static int kzm_pins[] __initdata = { */ static void __init kzm_board_init(void) { + imx31_soc_init(); + mxc_iomux_setup_multiple_pins(kzm_pins, ARRAY_SIZE(kzm_pins), "kzm"); kzm_init_ext_uart(); diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c index 38ec5cbbda9b..5cd8bee46960 100644 --- a/arch/arm/mach-imx/mach-mx1ads.c +++ b/arch/arm/mach-imx/mach-mx1ads.c @@ -115,6 +115,8 @@ static struct i2c_board_info mx1ads_i2c_devices[] = { */ static void __init mx1ads_init(void) { + imx1_soc_init(); + mxc_gpio_setup_multiple_pins(mx1ads_pins, ARRAY_SIZE(mx1ads_pins), "mx1ads"); diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c index 74ac88978ddd..d389ecf9b5a8 100644 --- a/arch/arm/mach-imx/mach-mx21ads.c +++ b/arch/arm/mach-imx/mach-mx21ads.c @@ -279,6 +279,8 @@ static struct platform_device *platform_devices[] __initdata = { static void __init mx21ads_board_init(void) { + imx21_soc_init(); + mxc_gpio_setup_multiple_pins(mx21ads_pins, ARRAY_SIZE(mx21ads_pins), "mx21ads"); diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c index 58ea3fdf0911..01534bb61305 100644 --- a/arch/arm/mach-imx/mach-mx25_3ds.c +++ b/arch/arm/mach-imx/mach-mx25_3ds.c @@ -219,6 +219,8 @@ static const struct esdhc_platform_data mx25pdk_esdhc_pdata __initconst = { static void __init mx25pdk_init(void) { + imx25_soc_init(); + mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads, ARRAY_SIZE(mx25pdk_pads)); diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c index 6e1accf93f81..117ce0a50f4e 100644 --- a/arch/arm/mach-imx/mach-mx27_3ds.c +++ b/arch/arm/mach-imx/mach-mx27_3ds.c @@ -267,6 +267,8 @@ static const struct imxi2c_platform_data mx27_3ds_i2c0_data __initconst = { static void __init mx27pdk_init(void) { + imx27_soc_init(); + mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins), "mx27pdk"); mx27_3ds_sdhc1_enable_level_translator(); diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c index 1db79506f5e4..fc26ed71b9ed 100644 --- a/arch/arm/mach-imx/mach-mx27ads.c +++ b/arch/arm/mach-imx/mach-mx27ads.c @@ -288,6 +288,8 @@ static const struct imxuart_platform_data uart_pdata __initconst = { static void __init mx27ads_board_init(void) { + imx27_soc_init(); + mxc_gpio_setup_multiple_pins(mx27ads_pins, ARRAY_SIZE(mx27ads_pins), "mx27ads"); diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c index 9b982449cb52..441fbb83f39c 100644 --- a/arch/arm/mach-imx/mach-mx31_3ds.c +++ b/arch/arm/mach-imx/mach-mx31_3ds.c @@ -13,6 +13,7 @@ */ #include <linux/delay.h> +#include <linux/dma-mapping.h> #include <linux/types.h> #include <linux/init.h> #include <linux/clk.h> @@ -689,6 +690,8 @@ static void __init mx31_3ds_init(void) { int ret; + imx31_soc_init(); + mxc_iomux_setup_multiple_pins(mx31_3ds_pins, ARRAY_SIZE(mx31_3ds_pins), "mx31_3ds"); diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c index f4dee0254634..0ce49478a479 100644 --- a/arch/arm/mach-imx/mach-mx31ads.c +++ b/arch/arm/mach-imx/mach-mx31ads.c @@ -516,6 +516,8 @@ static void __init mx31ads_init_irq(void) static void __init mx31ads_init(void) { + imx31_soc_init(); + mxc_init_extuart(); mxc_init_imx_uart(); mxc_init_i2c(); diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c index 410e676ae087..750368ddf0f9 100644 --- a/arch/arm/mach-imx/mach-mx31lilly.c +++ b/arch/arm/mach-imx/mach-mx31lilly.c @@ -243,6 +243,8 @@ core_param(mx31lilly_baseboard, mx31lilly_baseboard, int, 0444); static void __init mx31lilly_board_init(void) { + imx31_soc_init(); + switch (mx31lilly_baseboard) { case MX31LILLY_NOBOARD: break; diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c index ac9b4cad320e..4b47fd9fdd89 100644 --- a/arch/arm/mach-imx/mach-mx31lite.c +++ b/arch/arm/mach-imx/mach-mx31lite.c @@ -230,6 +230,8 @@ static void __init mx31lite_init(void) { int ret; + imx31_soc_init(); + switch (mx31lite_baseboard) { case MX31LITE_NOBOARD: break; diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c index eaa51e49ca95..a52fd36e2b52 100644 --- a/arch/arm/mach-imx/mach-mx31moboard.c +++ b/arch/arm/mach-imx/mach-mx31moboard.c @@ -507,6 +507,8 @@ core_param(mx31moboard_baseboard, mx31moboard_baseboard, int, 0444); */ static void __init mx31moboard_init(void) { + imx31_soc_init(); + mxc_iomux_setup_multiple_pins(moboard_pins, ARRAY_SIZE(moboard_pins), "moboard"); diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c index 882880ac1bbc..48b3c6fd5cf0 100644 --- a/arch/arm/mach-imx/mach-mx35_3ds.c +++ b/arch/arm/mach-imx/mach-mx35_3ds.c @@ -179,6 +179,8 @@ static const struct imxi2c_platform_data mx35_3ds_i2c0_data __initconst = { */ static void __init mx35_3ds_init(void) { + imx35_soc_init(); + mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads)); imx35_add_fec(NULL); diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c index 2774541511e7..c85876fed663 100644 --- a/arch/arm/mach-imx/mach-mxt_td60.c +++ b/arch/arm/mach-imx/mach-mxt_td60.c @@ -233,6 +233,8 @@ static const struct imxuart_platform_data uart_pdata __initconst = { static void __init mxt_td60_board_init(void) { + imx27_soc_init(); + mxc_gpio_setup_multiple_pins(mxt_td60_pins, ARRAY_SIZE(mxt_td60_pins), "MXT_TD60"); diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c index bbddc5a11c43..71083aa16038 100644 --- a/arch/arm/mach-imx/mach-pca100.c +++ b/arch/arm/mach-imx/mach-pca100.c @@ -357,6 +357,8 @@ static void __init pca100_init(void) { int ret; + imx27_soc_init(); + /* SSI unit */ mxc_audmux_v1_configure_port(MX27_AUDMUX_HPCR1_SSI0, MXC_AUDMUX_V1_PCR_SYN | /* 4wire mode */ diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c index 89c213b81295..f45b7cd72c8a 100644 --- a/arch/arm/mach-imx/mach-pcm037.c +++ b/arch/arm/mach-imx/mach-pcm037.c @@ -576,6 +576,8 @@ static void __init pcm037_init(void) { int ret; + imx31_soc_init(); + mxc_iomux_set_gpr(MUX_PGP_UH2, 1); mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins), diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c index 853bb871c7ed..2d6a64bbac44 100644 --- a/arch/arm/mach-imx/mach-pcm038.c +++ b/arch/arm/mach-imx/mach-pcm038.c @@ -295,6 +295,8 @@ static const struct mxc_usbh_platform_data usbh2_pdata __initconst = { static void __init pcm038_init(void) { + imx27_soc_init(); + mxc_gpio_setup_multiple_pins(pcm038_pins, ARRAY_SIZE(pcm038_pins), "PCM038"); diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c index 026441628dfa..163cc318cafb 100644 --- a/arch/arm/mach-imx/mach-pcm043.c +++ b/arch/arm/mach-imx/mach-pcm043.c @@ -356,6 +356,8 @@ static struct esdhc_platform_data sd1_pdata = { */ static void __init pcm043_init(void) { + imx35_soc_init(); + mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads)); mxc_audmux_v2_configure_port(3, diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c index c16328715939..3626f486498a 100644 --- a/arch/arm/mach-imx/mach-qong.c +++ b/arch/arm/mach-imx/mach-qong.c @@ -244,6 +244,8 @@ static void __init qong_init_fpga(void) */ static void __init qong_init(void) { + imx31_soc_init(); + mxc_init_imx_uart(); qong_init_nor_mtd(); qong_init_fpga(); diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c index dcaee043628e..82805260e19c 100644 --- a/arch/arm/mach-imx/mach-scb9328.c +++ b/arch/arm/mach-imx/mach-scb9328.c @@ -129,6 +129,8 @@ static struct platform_device *devices[] __initdata = { */ static void __init scb9328_init(void) { + imx1_soc_init(); + imx1_add_imx_uart0(&uart_pdata); printk(KERN_INFO"Scb9328: Adding devices\n"); diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c index d74e3473d236..7d8e012a6335 100644 --- a/arch/arm/mach-imx/mach-vpr200.c +++ b/arch/arm/mach-imx/mach-vpr200.c @@ -267,6 +267,8 @@ static struct platform_device *devices[] __initdata = { */ static void __init vpr200_board_init(void) { + imx35_soc_init(); + mxc_iomux_v3_setup_multiple_pads(vpr200_pads, ARRAY_SIZE(vpr200_pads)); imx35_add_fec(NULL); diff --git a/arch/arm/mach-imx/mm-imx1.c b/arch/arm/mach-imx/mm-imx1.c index 2e482ba5a0e7..2bded591d5c2 100644 --- a/arch/arm/mach-imx/mm-imx1.c +++ b/arch/arm/mach-imx/mm-imx1.c @@ -23,7 +23,6 @@ #include <mach/common.h> #include <mach/hardware.h> -#include <mach/gpio.h> #include <mach/irqs.h> #include <mach/iomux-v1.h> @@ -44,15 +43,19 @@ void __init imx1_init_early(void) MX1_NUM_GPIO_PORT); } -static struct mxc_gpio_port imx1_gpio_ports[] = { - DEFINE_IMX_GPIO_PORT_IRQ(MX1, 0, 1, MX1_GPIO_INT_PORTA), - DEFINE_IMX_GPIO_PORT_IRQ(MX1, 1, 2, MX1_GPIO_INT_PORTB), - DEFINE_IMX_GPIO_PORT_IRQ(MX1, 2, 3, MX1_GPIO_INT_PORTC), - DEFINE_IMX_GPIO_PORT_IRQ(MX1, 3, 4, MX1_GPIO_INT_PORTD), -}; - void __init mx1_init_irq(void) { mxc_init_irq(MX1_IO_ADDRESS(MX1_AVIC_BASE_ADDR)); - mxc_gpio_init(imx1_gpio_ports, ARRAY_SIZE(imx1_gpio_ports)); +} + +void __init imx1_soc_init(void) +{ + mxc_register_gpio("imx1-gpio", 0, MX1_GPIO1_BASE_ADDR, SZ_256, + MX1_GPIO_INT_PORTA, 0); + mxc_register_gpio("imx1-gpio", 1, MX1_GPIO2_BASE_ADDR, SZ_256, + MX1_GPIO_INT_PORTB, 0); + mxc_register_gpio("imx1-gpio", 2, MX1_GPIO3_BASE_ADDR, SZ_256, + MX1_GPIO_INT_PORTC, 0); + mxc_register_gpio("imx1-gpio", 3, MX1_GPIO4_BASE_ADDR, SZ_256, + MX1_GPIO_INT_PORTD, 0); } diff --git a/arch/arm/mach-imx/mm-imx21.c b/arch/arm/mach-imx/mm-imx21.c index 7a0c500ac2c8..6d7d518686a5 100644 --- a/arch/arm/mach-imx/mm-imx21.c +++ b/arch/arm/mach-imx/mm-imx21.c @@ -24,7 +24,6 @@ #include <mach/common.h> #include <asm/pgtable.h> #include <asm/mach/map.h> -#include <mach/gpio.h> #include <mach/irqs.h> #include <mach/iomux-v1.h> @@ -70,17 +69,17 @@ void __init imx21_init_early(void) MX21_NUM_GPIO_PORT); } -static struct mxc_gpio_port imx21_gpio_ports[] = { - DEFINE_IMX_GPIO_PORT_IRQ(MX21, 0, 1, MX21_INT_GPIO), - DEFINE_IMX_GPIO_PORT(MX21, 1, 2), - DEFINE_IMX_GPIO_PORT(MX21, 2, 3), - DEFINE_IMX_GPIO_PORT(MX21, 3, 4), - DEFINE_IMX_GPIO_PORT(MX21, 4, 5), - DEFINE_IMX_GPIO_PORT(MX21, 5, 6), -}; - void __init mx21_init_irq(void) { mxc_init_irq(MX21_IO_ADDRESS(MX21_AVIC_BASE_ADDR)); - mxc_gpio_init(imx21_gpio_ports, ARRAY_SIZE(imx21_gpio_ports)); +} + +void __init imx21_soc_init(void) +{ + mxc_register_gpio("imx21-gpio", 0, MX21_GPIO1_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); + mxc_register_gpio("imx21-gpio", 1, MX21_GPIO2_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); + mxc_register_gpio("imx21-gpio", 2, MX21_GPIO3_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); + mxc_register_gpio("imx21-gpio", 3, MX21_GPIO4_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); + mxc_register_gpio("imx21-gpio", 4, MX21_GPIO5_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); + mxc_register_gpio("imx21-gpio", 5, MX21_GPIO6_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); } diff --git a/arch/arm/mach-imx/mm-imx25.c b/arch/arm/mach-imx/mm-imx25.c index 02f7b5c7fa8e..9a1591c2508d 100644 --- a/arch/arm/mach-imx/mm-imx25.c +++ b/arch/arm/mach-imx/mm-imx25.c @@ -27,7 +27,6 @@ #include <mach/hardware.h> #include <mach/mx25.h> #include <mach/iomux-v3.h> -#include <mach/gpio.h> #include <mach/irqs.h> /* @@ -57,16 +56,16 @@ void __init imx25_init_early(void) mxc_arch_reset_init(MX25_IO_ADDRESS(MX25_WDOG_BASE_ADDR)); } -static struct mxc_gpio_port imx25_gpio_ports[] = { - DEFINE_IMX_GPIO_PORT_IRQ(MX25, 0, 1, MX25_INT_GPIO1), - DEFINE_IMX_GPIO_PORT_IRQ(MX25, 1, 2, MX25_INT_GPIO2), - DEFINE_IMX_GPIO_PORT_IRQ(MX25, 2, 3, MX25_INT_GPIO3), - DEFINE_IMX_GPIO_PORT_IRQ(MX25, 3, 4, MX25_INT_GPIO4), -}; - void __init mx25_init_irq(void) { mxc_init_irq(MX25_IO_ADDRESS(MX25_AVIC_BASE_ADDR)); - mxc_gpio_init(imx25_gpio_ports, ARRAY_SIZE(imx25_gpio_ports)); } +void __init imx25_soc_init(void) +{ + /* i.mx25 has the i.mx31 type gpio */ + mxc_register_gpio("imx31-gpio", 0, MX25_GPIO1_BASE_ADDR, SZ_16K, MX25_INT_GPIO1, 0); + mxc_register_gpio("imx31-gpio", 1, MX25_GPIO2_BASE_ADDR, SZ_16K, MX25_INT_GPIO2, 0); + mxc_register_gpio("imx31-gpio", 2, MX25_GPIO3_BASE_ADDR, SZ_16K, MX25_INT_GPIO3, 0); + mxc_register_gpio("imx31-gpio", 3, MX25_GPIO4_BASE_ADDR, SZ_16K, MX25_INT_GPIO4, 0); +} diff --git a/arch/arm/mach-imx/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c index a6761a39f08c..133b30003ddb 100644 --- a/arch/arm/mach-imx/mm-imx27.c +++ b/arch/arm/mach-imx/mm-imx27.c @@ -24,7 +24,6 @@ #include <mach/common.h> #include <asm/pgtable.h> #include <asm/mach/map.h> -#include <mach/gpio.h> #include <mach/irqs.h> #include <mach/iomux-v1.h> @@ -70,17 +69,18 @@ void __init imx27_init_early(void) MX27_NUM_GPIO_PORT); } -static struct mxc_gpio_port imx27_gpio_ports[] = { - DEFINE_IMX_GPIO_PORT_IRQ(MX27, 0, 1, MX27_INT_GPIO), - DEFINE_IMX_GPIO_PORT(MX27, 1, 2), - DEFINE_IMX_GPIO_PORT(MX27, 2, 3), - DEFINE_IMX_GPIO_PORT(MX27, 3, 4), - DEFINE_IMX_GPIO_PORT(MX27, 4, 5), - DEFINE_IMX_GPIO_PORT(MX27, 5, 6), -}; - void __init mx27_init_irq(void) { mxc_init_irq(MX27_IO_ADDRESS(MX27_AVIC_BASE_ADDR)); - mxc_gpio_init(imx27_gpio_ports, ARRAY_SIZE(imx27_gpio_ports)); +} + +void __init imx27_soc_init(void) +{ + /* i.mx27 has the i.mx21 type gpio */ + mxc_register_gpio("imx21-gpio", 0, MX27_GPIO1_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); + mxc_register_gpio("imx21-gpio", 1, MX27_GPIO2_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); + mxc_register_gpio("imx21-gpio", 2, MX27_GPIO3_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); + mxc_register_gpio("imx21-gpio", 3, MX27_GPIO4_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); + mxc_register_gpio("imx21-gpio", 4, MX27_GPIO5_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); + mxc_register_gpio("imx21-gpio", 5, MX27_GPIO6_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); } diff --git a/arch/arm/mach-imx/mm-imx31.c b/arch/arm/mach-imx/mm-imx31.c index 86b9b45864d2..6d103c01b8b9 100644 --- a/arch/arm/mach-imx/mm-imx31.c +++ b/arch/arm/mach-imx/mm-imx31.c @@ -26,7 +26,6 @@ #include <mach/common.h> #include <mach/hardware.h> #include <mach/iomux-v3.h> -#include <mach/gpio.h> #include <mach/irqs.h> static struct map_desc mx31_io_desc[] __initdata = { @@ -53,14 +52,14 @@ void __init imx31_init_early(void) mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR)); } -static struct mxc_gpio_port imx31_gpio_ports[] = { - DEFINE_IMX_GPIO_PORT_IRQ(MX31, 0, 1, MX31_INT_GPIO1), - DEFINE_IMX_GPIO_PORT_IRQ(MX31, 1, 2, MX31_INT_GPIO2), - DEFINE_IMX_GPIO_PORT_IRQ(MX31, 2, 3, MX31_INT_GPIO3), -}; - void __init mx31_init_irq(void) { mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR)); - mxc_gpio_init(imx31_gpio_ports, ARRAY_SIZE(imx31_gpio_ports)); +} + +void __init imx31_soc_init(void) +{ + mxc_register_gpio("imx31-gpio", 0, MX31_GPIO1_BASE_ADDR, SZ_16K, MX31_INT_GPIO1, 0); + mxc_register_gpio("imx31-gpio", 1, MX31_GPIO2_BASE_ADDR, SZ_16K, MX31_INT_GPIO2, 0); + mxc_register_gpio("imx31-gpio", 2, MX31_GPIO3_BASE_ADDR, SZ_16K, MX31_INT_GPIO3, 0); } diff --git a/arch/arm/mach-imx/mm-imx35.c b/arch/arm/mach-imx/mm-imx35.c index c880e6d1ae55..bb068bc8dab7 100644 --- a/arch/arm/mach-imx/mm-imx35.c +++ b/arch/arm/mach-imx/mm-imx35.c @@ -27,7 +27,6 @@ #include <mach/common.h> #include <mach/hardware.h> #include <mach/iomux-v3.h> -#include <mach/gpio.h> #include <mach/irqs.h> static struct map_desc mx35_io_desc[] __initdata = { @@ -50,14 +49,15 @@ void __init imx35_init_early(void) mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR)); } -static struct mxc_gpio_port imx35_gpio_ports[] = { - DEFINE_IMX_GPIO_PORT_IRQ(MX35, 0, 1, MX35_INT_GPIO1), - DEFINE_IMX_GPIO_PORT_IRQ(MX35, 1, 2, MX35_INT_GPIO2), - DEFINE_IMX_GPIO_PORT_IRQ(MX35, 2, 3, MX35_INT_GPIO3), -}; - void __init mx35_init_irq(void) { mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR)); - mxc_gpio_init(imx35_gpio_ports, ARRAY_SIZE(imx35_gpio_ports)); +} + +void __init imx35_soc_init(void) +{ + /* i.mx35 has the i.mx31 type gpio */ + mxc_register_gpio("imx31-gpio", 0, MX35_GPIO1_BASE_ADDR, SZ_16K, MX35_INT_GPIO1, 0); + mxc_register_gpio("imx31-gpio", 1, MX35_GPIO2_BASE_ADDR, SZ_16K, MX35_INT_GPIO2, 0); + mxc_register_gpio("imx31-gpio", 2, MX35_GPIO3_BASE_ADDR, SZ_16K, MX35_INT_GPIO3, 0); } diff --git a/arch/arm/mach-iop13xx/setup.c b/arch/arm/mach-iop13xx/setup.c index 5c147fb66a01..a5b989728b9e 100644 --- a/arch/arm/mach-iop13xx/setup.c +++ b/arch/arm/mach-iop13xx/setup.c @@ -17,6 +17,7 @@ * */ +#include <linux/dma-mapping.h> #include <linux/serial_8250.h> #include <linux/io.h> #ifdef CONFIG_MTD_PHYSMAP diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index 74ed81a3cb1a..07772575d7ab 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -419,14 +419,20 @@ static void notrace ixp4xx_update_sched_clock(void) /* * clocksource */ + +static cycle_t ixp4xx_clocksource_read(struct clocksource *c) +{ + return *IXP4XX_OSTS; +} + unsigned long ixp4xx_timer_freq = IXP4XX_TIMER_FREQ; EXPORT_SYMBOL(ixp4xx_timer_freq); static void __init ixp4xx_clocksource_init(void) { init_sched_clock(&cd, ixp4xx_update_sched_clock, 32, ixp4xx_timer_freq); - clocksource_mmio_init(&IXP4XX_OSTS, "OSTS", ixp4xx_timer_freq, 200, 32, - clocksource_mmio_readl_up); + clocksource_mmio_init(NULL, "OSTS", ixp4xx_timer_freq, 200, 32, + ixp4xx_clocksource_read); } /* diff --git a/arch/arm/mach-mmp/brownstone.c b/arch/arm/mach-mmp/brownstone.c index 7bb78fd5a2a6..c79162a50f28 100644 --- a/arch/arm/mach-mmp/brownstone.c +++ b/arch/arm/mach-mmp/brownstone.c @@ -177,9 +177,16 @@ static struct i2c_board_info brownstone_twsi1_info[] = { }; static struct sdhci_pxa_platdata mmp2_sdh_platdata_mmc0 = { - .max_speed = 25000000, + .clk_delay_cycles = 0x1f, }; +static struct sdhci_pxa_platdata mmp2_sdh_platdata_mmc2 = { + .clk_delay_cycles = 0x1f, + .flags = PXA_FLAG_CARD_PERMANENT + | PXA_FLAG_SD_8_BIT_CAPABLE_SLOT, +}; + + static void __init brownstone_init(void) { mfp_config(ARRAY_AND_SIZE(brownstone_pin_config)); @@ -189,6 +196,7 @@ static void __init brownstone_init(void) mmp2_add_uart(3); mmp2_add_twsi(1, NULL, ARRAY_AND_SIZE(brownstone_twsi1_info)); mmp2_add_sdhost(0, &mmp2_sdh_platdata_mmc0); /* SD/MMC */ + mmp2_add_sdhost(2, &mmp2_sdh_platdata_mmc2); /* eMMC */ /* enable 5v regulator */ platform_device_register(&brownstone_v_5vp_device); diff --git a/arch/arm/mach-mmp/include/mach/mmp2.h b/arch/arm/mach-mmp/include/mach/mmp2.h index 2cbf6df09b82..de7b88826ad7 100644 --- a/arch/arm/mach-mmp/include/mach/mmp2.h +++ b/arch/arm/mach-mmp/include/mach/mmp2.h @@ -1,7 +1,7 @@ #ifndef __ASM_MACH_MMP2_H #define __ASM_MACH_MMP2_H -#include <plat/sdhci.h> +#include <linux/platform_data/pxa_sdhci.h> struct sys_timer; diff --git a/arch/arm/mach-mmp/jasper.c b/arch/arm/mach-mmp/jasper.c index 24172a0aad59..5d6421d63254 100644 --- a/arch/arm/mach-mmp/jasper.c +++ b/arch/arm/mach-mmp/jasper.c @@ -154,7 +154,7 @@ static struct i2c_board_info jasper_twsi1_info[] = { }; static struct sdhci_pxa_platdata mmp2_sdh_platdata_mmc0 = { - .max_speed = 25000000, + .clk_delay_cycles = 0x1f, }; static void __init jasper_init(void) diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c index 8e6c3ac7f7c1..079c18861d5c 100644 --- a/arch/arm/mach-mmp/mmp2.c +++ b/arch/arm/mach-mmp/mmp2.c @@ -168,10 +168,10 @@ static struct clk_lookup mmp2_clkregs[] = { INIT_CLKREG(&clk_twsi5, "pxa2xx-i2c.4", NULL), INIT_CLKREG(&clk_twsi6, "pxa2xx-i2c.5", NULL), INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL), - INIT_CLKREG(&clk_sdh0, "sdhci-pxa.0", "PXA-SDHCLK"), - INIT_CLKREG(&clk_sdh1, "sdhci-pxa.1", "PXA-SDHCLK"), - INIT_CLKREG(&clk_sdh2, "sdhci-pxa.2", "PXA-SDHCLK"), - INIT_CLKREG(&clk_sdh3, "sdhci-pxa.3", "PXA-SDHCLK"), + INIT_CLKREG(&clk_sdh0, "sdhci-pxav3.0", "PXA-SDHCLK"), + INIT_CLKREG(&clk_sdh1, "sdhci-pxav3.1", "PXA-SDHCLK"), + INIT_CLKREG(&clk_sdh2, "sdhci-pxav3.2", "PXA-SDHCLK"), + INIT_CLKREG(&clk_sdh3, "sdhci-pxav3.3", "PXA-SDHCLK"), }; static int __init mmp2_init(void) @@ -222,8 +222,8 @@ MMP2_DEVICE(twsi4, "pxa2xx-i2c", 3, TWSI4, 0xd4033000, 0x70); MMP2_DEVICE(twsi5, "pxa2xx-i2c", 4, TWSI5, 0xd4033800, 0x70); MMP2_DEVICE(twsi6, "pxa2xx-i2c", 5, TWSI6, 0xd4034000, 0x70); MMP2_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x100, 28, 29); -MMP2_DEVICE(sdh0, "sdhci-pxa", 0, MMC, 0xd4280000, 0x120); -MMP2_DEVICE(sdh1, "sdhci-pxa", 1, MMC2, 0xd4280800, 0x120); -MMP2_DEVICE(sdh2, "sdhci-pxa", 2, MMC3, 0xd4281000, 0x120); -MMP2_DEVICE(sdh3, "sdhci-pxa", 3, MMC4, 0xd4281800, 0x120); +MMP2_DEVICE(sdh0, "sdhci-pxav3", 0, MMC, 0xd4280000, 0x120); +MMP2_DEVICE(sdh1, "sdhci-pxav3", 1, MMC2, 0xd4280800, 0x120); +MMP2_DEVICE(sdh2, "sdhci-pxav3", 2, MMC3, 0xd4281000, 0x120); +MMP2_DEVICE(sdh3, "sdhci-pxav3", 3, MMC4, 0xd4281800, 0x120); diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c index 4efa02ee1639..add0d42de7af 100644 --- a/arch/arm/mach-mx5/board-cpuimx51.c +++ b/arch/arm/mach-mx5/board-cpuimx51.c @@ -245,6 +245,8 @@ __setup("otg_mode=", eukrea_cpuimx51_otg_mode); */ static void __init eukrea_cpuimx51_init(void) { + imx51_soc_init(); + mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51_pads, ARRAY_SIZE(eukrea_cpuimx51_pads)); diff --git a/arch/arm/mach-mx5/board-cpuimx51sd.c b/arch/arm/mach-mx5/board-cpuimx51sd.c index 5ef25a596143..ff096d587299 100644 --- a/arch/arm/mach-mx5/board-cpuimx51sd.c +++ b/arch/arm/mach-mx5/board-cpuimx51sd.c @@ -264,6 +264,8 @@ static struct platform_device *platform_devices[] __initdata = { static void __init eukrea_cpuimx51sd_init(void) { + imx51_soc_init(); + mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51sd_pads, ARRAY_SIZE(eukrea_cpuimx51sd_pads)); diff --git a/arch/arm/mach-mx5/board-mx50_rdp.c b/arch/arm/mach-mx5/board-mx50_rdp.c index 11210e1ae42a..7de25c6712eb 100644 --- a/arch/arm/mach-mx5/board-mx50_rdp.c +++ b/arch/arm/mach-mx5/board-mx50_rdp.c @@ -192,6 +192,8 @@ static const struct imxi2c_platform_data i2c_data __initconst = { */ static void __init mx50_rdp_board_init(void) { + imx50_soc_init(); + mxc_iomux_v3_setup_multiple_pads(mx50_rdp_pads, ARRAY_SIZE(mx50_rdp_pads)); diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-mx5/board-mx51_3ds.c index 63dfbeafbc1e..3112d15feebc 100644 --- a/arch/arm/mach-mx5/board-mx51_3ds.c +++ b/arch/arm/mach-mx5/board-mx51_3ds.c @@ -135,6 +135,8 @@ static struct spi_board_info mx51_3ds_spi_nor_device[] = { */ static void __init mx51_3ds_init(void) { + imx51_soc_init(); + mxc_iomux_v3_setup_multiple_pads(mx51_3ds_pads, ARRAY_SIZE(mx51_3ds_pads)); diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c index c7b3fabf50f9..6021dd00ec75 100644 --- a/arch/arm/mach-mx5/board-mx51_babbage.c +++ b/arch/arm/mach-mx5/board-mx51_babbage.c @@ -340,6 +340,8 @@ static void __init mx51_babbage_init(void) iomux_v3_cfg_t power_key = _MX51_PAD_EIM_A27__GPIO2_21 | MUX_PAD_CTRL(PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP); + imx51_soc_init(); + #if defined(CONFIG_CPU_FREQ_IMX) get_cpu_op = mx51_get_cpu_op; #endif diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c index 6e362315291b..3be603b9075a 100644 --- a/arch/arm/mach-mx5/board-mx51_efikamx.c +++ b/arch/arm/mach-mx5/board-mx51_efikamx.c @@ -236,6 +236,8 @@ late_initcall(mx51_efikamx_power_init); static void __init mx51_efikamx_init(void) { + imx51_soc_init(); + mxc_iomux_v3_setup_multiple_pads(mx51efikamx_pads, ARRAY_SIZE(mx51efikamx_pads)); efika_board_common_init(); diff --git a/arch/arm/mach-mx5/board-mx51_efikasb.c b/arch/arm/mach-mx5/board-mx51_efikasb.c index 474fc6e4c6df..4b2e522de0f8 100644 --- a/arch/arm/mach-mx5/board-mx51_efikasb.c +++ b/arch/arm/mach-mx5/board-mx51_efikasb.c @@ -248,6 +248,8 @@ static void __init mx51_efikasb_board_id(void) static void __init efikasb_board_init(void) { + imx51_soc_init(); + mxc_iomux_v3_setup_multiple_pads(mx51efikasb_pads, ARRAY_SIZE(mx51efikasb_pads)); efika_board_common_init(); diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c index f87d571882c6..0d9218a6e2d2 100644 --- a/arch/arm/mach-mx5/board-mx53_evk.c +++ b/arch/arm/mach-mx5/board-mx53_evk.c @@ -117,6 +117,8 @@ static const struct spi_imx_master mx53_evk_spi_data __initconst = { static void __init mx53_evk_board_init(void) { + imx53_soc_init(); + mxc_iomux_v3_setup_multiple_pads(mx53_evk_pads, ARRAY_SIZE(mx53_evk_pads)); mx53_evk_init_uart(); diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c index 1b947e8c9c0c..359c3e248add 100644 --- a/arch/arm/mach-mx5/board-mx53_loco.c +++ b/arch/arm/mach-mx5/board-mx53_loco.c @@ -227,6 +227,8 @@ static const struct imxi2c_platform_data mx53_loco_i2c_data __initconst = { static void __init mx53_loco_board_init(void) { + imx53_soc_init(); + mxc_iomux_v3_setup_multiple_pads(mx53_loco_pads, ARRAY_SIZE(mx53_loco_pads)); imx53_add_imx_uart(0, NULL); diff --git a/arch/arm/mach-mx5/board-mx53_smd.c b/arch/arm/mach-mx5/board-mx53_smd.c index 817c08938f55..bc02894eafef 100644 --- a/arch/arm/mach-mx5/board-mx53_smd.c +++ b/arch/arm/mach-mx5/board-mx53_smd.c @@ -113,6 +113,8 @@ static const struct imxi2c_platform_data mx53_smd_i2c_data __initconst = { static void __init mx53_smd_board_init(void) { + imx53_soc_init(); + mxc_iomux_v3_setup_multiple_pads(mx53_smd_pads, ARRAY_SIZE(mx53_smd_pads)); mx53_smd_init_uart(); diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c index 6b89c1bf4eb2..cd79e3435e28 100644 --- a/arch/arm/mach-mx5/clock-mx51-mx53.c +++ b/arch/arm/mach-mx5/clock-mx51-mx53.c @@ -1442,7 +1442,8 @@ static struct clk_lookup mx51_lookups[] = { _REGISTER_CLOCK(NULL, "gpt_32k", gpt_32k_clk) _REGISTER_CLOCK("imx51-ecspi.0", NULL, ecspi1_clk) _REGISTER_CLOCK("imx51-ecspi.1", NULL, ecspi2_clk) - _REGISTER_CLOCK("imx51-cspi.0", NULL, cspi_clk) + /* i.mx51 has the i.mx35 type cspi */ + _REGISTER_CLOCK("imx35-cspi.0", NULL, cspi_clk) _REGISTER_CLOCK("sdhci-esdhc-imx.0", NULL, esdhc1_clk) _REGISTER_CLOCK("sdhci-esdhc-imx.1", NULL, esdhc2_clk) _REGISTER_CLOCK("sdhci-esdhc-imx.2", NULL, esdhc3_clk) @@ -1471,9 +1472,11 @@ static struct clk_lookup mx53_lookups[] = { _REGISTER_CLOCK("sdhci-esdhc-imx.1", NULL, esdhc2_mx53_clk) _REGISTER_CLOCK("sdhci-esdhc-imx.2", NULL, esdhc3_mx53_clk) _REGISTER_CLOCK("sdhci-esdhc-imx.3", NULL, esdhc4_mx53_clk) - _REGISTER_CLOCK("imx53-ecspi.0", NULL, ecspi1_clk) - _REGISTER_CLOCK("imx53-ecspi.1", NULL, ecspi2_clk) - _REGISTER_CLOCK("imx53-cspi.0", NULL, cspi_clk) + /* i.mx53 has the i.mx51 type ecspi */ + _REGISTER_CLOCK("imx51-ecspi.0", NULL, ecspi1_clk) + _REGISTER_CLOCK("imx51-ecspi.1", NULL, ecspi2_clk) + /* i.mx53 has the i.mx25 type cspi */ + _REGISTER_CLOCK("imx35-cspi.0", NULL, cspi_clk) _REGISTER_CLOCK("imx2-wdt.0", NULL, dummy_clk) _REGISTER_CLOCK("imx2-wdt.1", NULL, dummy_clk) }; diff --git a/arch/arm/mach-mx5/devices.c b/arch/arm/mach-mx5/devices.c index 153ada53e575..371ca8c8414c 100644 --- a/arch/arm/mach-mx5/devices.c +++ b/arch/arm/mach-mx5/devices.c @@ -12,7 +12,6 @@ #include <linux/platform_device.h> #include <linux/dma-mapping.h> -#include <linux/gpio.h> #include <mach/hardware.h> #include <mach/imx-uart.h> #include <mach/irqs.h> @@ -119,66 +118,3 @@ struct platform_device mxc_usbh2_device = { .coherent_dma_mask = DMA_BIT_MASK(32), }, }; - -static struct mxc_gpio_port mxc_gpio_ports[] = { - { - .chip.label = "gpio-0", - .base = MX51_IO_ADDRESS(MX51_GPIO1_BASE_ADDR), - .irq = MX51_MXC_INT_GPIO1_LOW, - .irq_high = MX51_MXC_INT_GPIO1_HIGH, - .virtual_irq_start = MXC_GPIO_IRQ_START - }, - { - .chip.label = "gpio-1", - .base = MX51_IO_ADDRESS(MX51_GPIO2_BASE_ADDR), - .irq = MX51_MXC_INT_GPIO2_LOW, - .irq_high = MX51_MXC_INT_GPIO2_HIGH, - .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 1 - }, - { - .chip.label = "gpio-2", - .base = MX51_IO_ADDRESS(MX51_GPIO3_BASE_ADDR), - .irq = MX51_MXC_INT_GPIO3_LOW, - .irq_high = MX51_MXC_INT_GPIO3_HIGH, - .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 2 - }, - { - .chip.label = "gpio-3", - .base = MX51_IO_ADDRESS(MX51_GPIO4_BASE_ADDR), - .irq = MX51_MXC_INT_GPIO4_LOW, - .irq_high = MX51_MXC_INT_GPIO4_HIGH, - .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 3 - }, - { - .chip.label = "gpio-4", - .base = MX53_IO_ADDRESS(MX53_GPIO5_BASE_ADDR), - .irq = MX53_INT_GPIO5_LOW, - .irq_high = MX53_INT_GPIO5_HIGH, - .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 4 - }, - { - .chip.label = "gpio-5", - .base = MX53_IO_ADDRESS(MX53_GPIO6_BASE_ADDR), - .irq = MX53_INT_GPIO6_LOW, - .irq_high = MX53_INT_GPIO6_HIGH, - .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 5 - }, - { - .chip.label = "gpio-6", - .base = MX53_IO_ADDRESS(MX53_GPIO7_BASE_ADDR), - .irq = MX53_INT_GPIO7_LOW, - .irq_high = MX53_INT_GPIO7_HIGH, - .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 6 - }, -}; - -int __init imx51_register_gpios(void) -{ - return mxc_gpio_init(mxc_gpio_ports, 4); -} - -int __init imx53_register_gpios(void) -{ - return mxc_gpio_init(mxc_gpio_ports, ARRAY_SIZE(mxc_gpio_ports)); -} - diff --git a/arch/arm/mach-mx5/mm-mx50.c b/arch/arm/mach-mx5/mm-mx50.c index b9c363b514a9..77e374c726fa 100644 --- a/arch/arm/mach-mx5/mm-mx50.c +++ b/arch/arm/mach-mx5/mm-mx50.c @@ -26,7 +26,6 @@ #include <mach/hardware.h> #include <mach/common.h> #include <mach/iomux-v3.h> -#include <mach/gpio.h> #include <mach/irqs.h> /* @@ -56,17 +55,18 @@ void __init imx50_init_early(void) mxc_arch_reset_init(MX50_IO_ADDRESS(MX50_WDOG_BASE_ADDR)); } -static struct mxc_gpio_port imx50_gpio_ports[] = { - DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 0, 1, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH), - DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 1, 2, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH), - DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 2, 3, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH), - DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 3, 4, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH), - DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 4, 5, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH), - DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 5, 6, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH), -}; - void __init mx50_init_irq(void) { tzic_init_irq(MX50_IO_ADDRESS(MX50_TZIC_BASE_ADDR)); - mxc_gpio_init(imx50_gpio_ports, ARRAY_SIZE(imx50_gpio_ports)); +} + +void __init imx50_soc_init(void) +{ + /* i.mx50 has the i.mx31 type gpio */ + mxc_register_gpio("imx31-gpio", 0, MX50_GPIO1_BASE_ADDR, SZ_16K, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH); + mxc_register_gpio("imx31-gpio", 1, MX50_GPIO2_BASE_ADDR, SZ_16K, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH); + mxc_register_gpio("imx31-gpio", 2, MX50_GPIO3_BASE_ADDR, SZ_16K, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH); + mxc_register_gpio("imx31-gpio", 3, MX50_GPIO4_BASE_ADDR, SZ_16K, MX50_INT_GPIO4_LOW, MX50_INT_GPIO4_HIGH); + mxc_register_gpio("imx31-gpio", 4, MX50_GPIO5_BASE_ADDR, SZ_16K, MX50_INT_GPIO5_LOW, MX50_INT_GPIO5_HIGH); + mxc_register_gpio("imx31-gpio", 5, MX50_GPIO6_BASE_ADDR, SZ_16K, MX50_INT_GPIO6_LOW, MX50_INT_GPIO6_HIGH); } diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c index ff557301b42b..665843d6c2b2 100644 --- a/arch/arm/mach-mx5/mm.c +++ b/arch/arm/mach-mx5/mm.c @@ -69,8 +69,6 @@ void __init imx53_init_early(void) mxc_arch_reset_init(MX53_IO_ADDRESS(MX53_WDOG1_BASE_ADDR)); } -int imx51_register_gpios(void); - void __init mx51_init_irq(void) { unsigned long tzic_addr; @@ -86,11 +84,8 @@ void __init mx51_init_irq(void) panic("unable to map TZIC interrupt controller\n"); tzic_init_irq(tzic_virt); - imx51_register_gpios(); } -int imx53_register_gpios(void); - void __init mx53_init_irq(void) { unsigned long tzic_addr; @@ -103,5 +98,25 @@ void __init mx53_init_irq(void) panic("unable to map TZIC interrupt controller\n"); tzic_init_irq(tzic_virt); - imx53_register_gpios(); +} + +void __init imx51_soc_init(void) +{ + /* i.mx51 has the i.mx31 type gpio */ + mxc_register_gpio("imx31-gpio", 0, MX51_GPIO1_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO1_LOW, MX51_MXC_INT_GPIO1_HIGH); + mxc_register_gpio("imx31-gpio", 1, MX51_GPIO2_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO2_LOW, MX51_MXC_INT_GPIO2_HIGH); + mxc_register_gpio("imx31-gpio", 2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO3_LOW, MX51_MXC_INT_GPIO3_HIGH); + mxc_register_gpio("imx31-gpio", 3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO4_LOW, MX51_MXC_INT_GPIO4_HIGH); +} + +void __init imx53_soc_init(void) +{ + /* i.mx53 has the i.mx31 type gpio */ + mxc_register_gpio("imx31-gpio", 0, MX53_GPIO1_BASE_ADDR, SZ_16K, MX53_INT_GPIO1_LOW, MX53_INT_GPIO1_HIGH); + mxc_register_gpio("imx31-gpio", 1, MX53_GPIO2_BASE_ADDR, SZ_16K, MX53_INT_GPIO2_LOW, MX53_INT_GPIO2_HIGH); + mxc_register_gpio("imx31-gpio", 2, MX53_GPIO3_BASE_ADDR, SZ_16K, MX53_INT_GPIO3_LOW, MX53_INT_GPIO3_HIGH); + mxc_register_gpio("imx31-gpio", 3, MX53_GPIO4_BASE_ADDR, SZ_16K, MX53_INT_GPIO4_LOW, MX53_INT_GPIO4_HIGH); + mxc_register_gpio("imx31-gpio", 4, MX53_GPIO5_BASE_ADDR, SZ_16K, MX53_INT_GPIO5_LOW, MX53_INT_GPIO5_HIGH); + mxc_register_gpio("imx31-gpio", 5, MX53_GPIO6_BASE_ADDR, SZ_16K, MX53_INT_GPIO6_LOW, MX53_INT_GPIO6_HIGH); + mxc_register_gpio("imx31-gpio", 6, MX53_GPIO7_BASE_ADDR, SZ_16K, MX53_INT_GPIO7_LOW, MX53_INT_GPIO7_HIGH); } diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile index 58e892376bf2..6c38262a3aaa 100644 --- a/arch/arm/mach-mxs/Makefile +++ b/arch/arm/mach-mxs/Makefile @@ -1,5 +1,5 @@ # Common support -obj-y := clock.o devices.o gpio.o icoll.o iomux.o system.o timer.o +obj-y := clock.o devices.o icoll.o iomux.o system.o timer.o obj-$(CONFIG_MXS_OCOTP) += ocotp.o obj-$(CONFIG_PM) += pm.o diff --git a/arch/arm/mach-mxs/devices.c b/arch/arm/mach-mxs/devices.c index cfdb6b284702..fe3e847930c9 100644 --- a/arch/arm/mach-mxs/devices.c +++ b/arch/arm/mach-mxs/devices.c @@ -88,3 +88,14 @@ int __init mxs_add_amba_device(const struct amba_device *dev) return amba_device_register(adev, &iomem_resource); } + +struct device mxs_apbh_bus = { + .init_name = "mxs_apbh", + .parent = &platform_bus, +}; + +static int __init mxs_device_init(void) +{ + return device_register(&mxs_apbh_bus); +} +core_initcall(mxs_device_init); diff --git a/arch/arm/mach-mxs/devices/Makefile b/arch/arm/mach-mxs/devices/Makefile index 324f2824d38d..351915c683ff 100644 --- a/arch/arm/mach-mxs/devices/Makefile +++ b/arch/arm/mach-mxs/devices/Makefile @@ -6,4 +6,5 @@ obj-$(CONFIG_MXS_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_I2C) += platform-mxs-i2c.o obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_MMC) += platform-mxs-mmc.o obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_PWM) += platform-mxs-pwm.o +obj-y += platform-gpio-mxs.o obj-$(CONFIG_MXS_HAVE_PLATFORM_MXSFB) += platform-mxsfb.o diff --git a/arch/arm/mach-mxs/devices/platform-auart.c b/arch/arm/mach-mxs/devices/platform-auart.c index 796606cce0ce..27608f5d2ac8 100644 --- a/arch/arm/mach-mxs/devices/platform-auart.c +++ b/arch/arm/mach-mxs/devices/platform-auart.c @@ -6,6 +6,7 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ +#include <linux/dma-mapping.h> #include <asm/sizes.h> #include <mach/mx23.h> #include <mach/mx28.h> diff --git a/arch/arm/mach-mxs/devices/platform-dma.c b/arch/arm/mach-mxs/devices/platform-dma.c index 295c4424d5d9..6a0202b1016c 100644 --- a/arch/arm/mach-mxs/devices/platform-dma.c +++ b/arch/arm/mach-mxs/devices/platform-dma.c @@ -6,6 +6,7 @@ * Free Software Foundation. */ #include <linux/compiler.h> +#include <linux/dma-mapping.h> #include <linux/err.h> #include <linux/init.h> diff --git a/arch/arm/mach-mxs/devices/platform-fec.c b/arch/arm/mach-mxs/devices/platform-fec.c index 9859cf283335..ae96a4fd8f14 100644 --- a/arch/arm/mach-mxs/devices/platform-fec.c +++ b/arch/arm/mach-mxs/devices/platform-fec.c @@ -6,6 +6,7 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ +#include <linux/dma-mapping.h> #include <asm/sizes.h> #include <mach/mx28.h> #include <mach/devices-common.h> diff --git a/arch/arm/mach-mxs/devices/platform-gpio-mxs.c b/arch/arm/mach-mxs/devices/platform-gpio-mxs.c new file mode 100644 index 000000000000..ed0885e414e0 --- /dev/null +++ b/arch/arm/mach-mxs/devices/platform-gpio-mxs.c @@ -0,0 +1,53 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <linux/compiler.h> +#include <linux/err.h> +#include <linux/init.h> + +#include <mach/mx23.h> +#include <mach/mx28.h> +#include <mach/devices-common.h> + +struct platform_device *__init mxs_add_gpio( + int id, resource_size_t iobase, int irq) +{ + struct resource res[] = { + { + .start = iobase, + .end = iobase + SZ_8K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = irq, + .end = irq, + .flags = IORESOURCE_IRQ, + }, + }; + + return platform_device_register_resndata(&mxs_apbh_bus, + "gpio-mxs", id, res, ARRAY_SIZE(res), NULL, 0); +} + +static int __init mxs_add_mxs_gpio(void) +{ + if (cpu_is_mx23()) { + mxs_add_gpio(0, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO0); + mxs_add_gpio(1, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO1); + mxs_add_gpio(2, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO2); + } + + if (cpu_is_mx28()) { + mxs_add_gpio(0, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO0); + mxs_add_gpio(1, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO1); + mxs_add_gpio(2, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO2); + mxs_add_gpio(3, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO3); + mxs_add_gpio(4, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO4); + } + + return 0; +} +postcore_initcall(mxs_add_mxs_gpio); diff --git a/arch/arm/mach-mxs/gpio.c b/arch/arm/mach-mxs/gpio.c deleted file mode 100644 index 2c950fef71a8..000000000000 --- a/arch/arm/mach-mxs/gpio.c +++ /dev/null @@ -1,331 +0,0 @@ -/* - * MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de> - * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * - * Based on code from Freescale, - * Copyright (C) 2004-2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/io.h> -#include <linux/irq.h> -#include <linux/gpio.h> -#include <mach/mx23.h> -#include <mach/mx28.h> -#include <asm-generic/bug.h> - -#include "gpio.h" - -static struct mxs_gpio_port *mxs_gpio_ports; -static int gpio_table_size; - -#define PINCTRL_DOUT(n) ((cpu_is_mx23() ? 0x0500 : 0x0700) + (n) * 0x10) -#define PINCTRL_DIN(n) ((cpu_is_mx23() ? 0x0600 : 0x0900) + (n) * 0x10) -#define PINCTRL_DOE(n) ((cpu_is_mx23() ? 0x0700 : 0x0b00) + (n) * 0x10) -#define PINCTRL_PIN2IRQ(n) ((cpu_is_mx23() ? 0x0800 : 0x1000) + (n) * 0x10) -#define PINCTRL_IRQEN(n) ((cpu_is_mx23() ? 0x0900 : 0x1100) + (n) * 0x10) -#define PINCTRL_IRQLEV(n) ((cpu_is_mx23() ? 0x0a00 : 0x1200) + (n) * 0x10) -#define PINCTRL_IRQPOL(n) ((cpu_is_mx23() ? 0x0b00 : 0x1300) + (n) * 0x10) -#define PINCTRL_IRQSTAT(n) ((cpu_is_mx23() ? 0x0c00 : 0x1400) + (n) * 0x10) - -#define GPIO_INT_FALL_EDGE 0x0 -#define GPIO_INT_LOW_LEV 0x1 -#define GPIO_INT_RISE_EDGE 0x2 -#define GPIO_INT_HIGH_LEV 0x3 -#define GPIO_INT_LEV_MASK (1 << 0) -#define GPIO_INT_POL_MASK (1 << 1) - -/* Note: This driver assumes 32 GPIOs are handled in one register */ - -static void clear_gpio_irqstatus(struct mxs_gpio_port *port, u32 index) -{ - __mxs_clrl(1 << index, port->base + PINCTRL_IRQSTAT(port->id)); -} - -static void set_gpio_irqenable(struct mxs_gpio_port *port, u32 index, - int enable) -{ - if (enable) { - __mxs_setl(1 << index, port->base + PINCTRL_IRQEN(port->id)); - __mxs_setl(1 << index, port->base + PINCTRL_PIN2IRQ(port->id)); - } else { - __mxs_clrl(1 << index, port->base + PINCTRL_IRQEN(port->id)); - } -} - -static void mxs_gpio_ack_irq(struct irq_data *d) -{ - u32 gpio = irq_to_gpio(d->irq); - clear_gpio_irqstatus(&mxs_gpio_ports[gpio / 32], gpio & 0x1f); -} - -static void mxs_gpio_mask_irq(struct irq_data *d) -{ - u32 gpio = irq_to_gpio(d->irq); - set_gpio_irqenable(&mxs_gpio_ports[gpio / 32], gpio & 0x1f, 0); -} - -static void mxs_gpio_unmask_irq(struct irq_data *d) -{ - u32 gpio = irq_to_gpio(d->irq); - set_gpio_irqenable(&mxs_gpio_ports[gpio / 32], gpio & 0x1f, 1); -} - -static int mxs_gpio_get(struct gpio_chip *chip, unsigned offset); - -static int mxs_gpio_set_irq_type(struct irq_data *d, unsigned int type) -{ - u32 gpio = irq_to_gpio(d->irq); - u32 pin_mask = 1 << (gpio & 31); - struct mxs_gpio_port *port = &mxs_gpio_ports[gpio / 32]; - void __iomem *pin_addr; - int edge; - - switch (type) { - case IRQ_TYPE_EDGE_RISING: - edge = GPIO_INT_RISE_EDGE; - break; - case IRQ_TYPE_EDGE_FALLING: - edge = GPIO_INT_FALL_EDGE; - break; - case IRQ_TYPE_LEVEL_LOW: - edge = GPIO_INT_LOW_LEV; - break; - case IRQ_TYPE_LEVEL_HIGH: - edge = GPIO_INT_HIGH_LEV; - break; - default: - return -EINVAL; - } - - /* set level or edge */ - pin_addr = port->base + PINCTRL_IRQLEV(port->id); - if (edge & GPIO_INT_LEV_MASK) - __mxs_setl(pin_mask, pin_addr); - else - __mxs_clrl(pin_mask, pin_addr); - - /* set polarity */ - pin_addr = port->base + PINCTRL_IRQPOL(port->id); - if (edge & GPIO_INT_POL_MASK) - __mxs_setl(pin_mask, pin_addr); - else - __mxs_clrl(pin_mask, pin_addr); - - clear_gpio_irqstatus(port, gpio & 0x1f); - - return 0; -} - -/* MXS has one interrupt *per* gpio port */ -static void mxs_gpio_irq_handler(u32 irq, struct irq_desc *desc) -{ - u32 irq_stat; - struct mxs_gpio_port *port = (struct mxs_gpio_port *)irq_get_handler_data(irq); - u32 gpio_irq_no_base = port->virtual_irq_start; - - desc->irq_data.chip->irq_ack(&desc->irq_data); - - irq_stat = __raw_readl(port->base + PINCTRL_IRQSTAT(port->id)) & - __raw_readl(port->base + PINCTRL_IRQEN(port->id)); - - while (irq_stat != 0) { - int irqoffset = fls(irq_stat) - 1; - generic_handle_irq(gpio_irq_no_base + irqoffset); - irq_stat &= ~(1 << irqoffset); - } -} - -/* - * Set interrupt number "irq" in the GPIO as a wake-up source. - * While system is running, all registered GPIO interrupts need to have - * wake-up enabled. When system is suspended, only selected GPIO interrupts - * need to have wake-up enabled. - * @param irq interrupt source number - * @param enable enable as wake-up if equal to non-zero - * @return This function returns 0 on success. - */ -static int mxs_gpio_set_wake_irq(struct irq_data *d, unsigned int enable) -{ - u32 gpio = irq_to_gpio(d->irq); - u32 gpio_idx = gpio & 0x1f; - struct mxs_gpio_port *port = &mxs_gpio_ports[gpio / 32]; - - if (enable) { - if (port->irq_high && (gpio_idx >= 16)) - enable_irq_wake(port->irq_high); - else - enable_irq_wake(port->irq); - } else { - if (port->irq_high && (gpio_idx >= 16)) - disable_irq_wake(port->irq_high); - else - disable_irq_wake(port->irq); - } - - return 0; -} - -static struct irq_chip gpio_irq_chip = { - .name = "mxs gpio", - .irq_ack = mxs_gpio_ack_irq, - .irq_mask = mxs_gpio_mask_irq, - .irq_unmask = mxs_gpio_unmask_irq, - .irq_set_type = mxs_gpio_set_irq_type, - .irq_set_wake = mxs_gpio_set_wake_irq, -}; - -static void mxs_set_gpio_direction(struct gpio_chip *chip, unsigned offset, - int dir) -{ - struct mxs_gpio_port *port = - container_of(chip, struct mxs_gpio_port, chip); - void __iomem *pin_addr = port->base + PINCTRL_DOE(port->id); - - if (dir) - __mxs_setl(1 << offset, pin_addr); - else - __mxs_clrl(1 << offset, pin_addr); -} - -static int mxs_gpio_get(struct gpio_chip *chip, unsigned offset) -{ - struct mxs_gpio_port *port = - container_of(chip, struct mxs_gpio_port, chip); - - return (__raw_readl(port->base + PINCTRL_DIN(port->id)) >> offset) & 1; -} - -static void mxs_gpio_set(struct gpio_chip *chip, unsigned offset, int value) -{ - struct mxs_gpio_port *port = - container_of(chip, struct mxs_gpio_port, chip); - void __iomem *pin_addr = port->base + PINCTRL_DOUT(port->id); - - if (value) - __mxs_setl(1 << offset, pin_addr); - else - __mxs_clrl(1 << offset, pin_addr); -} - -static int mxs_gpio_to_irq(struct gpio_chip *chip, unsigned offset) -{ - struct mxs_gpio_port *port = - container_of(chip, struct mxs_gpio_port, chip); - - return port->virtual_irq_start + offset; -} - -static int mxs_gpio_direction_input(struct gpio_chip *chip, unsigned offset) -{ - mxs_set_gpio_direction(chip, offset, 0); - return 0; -} - -static int mxs_gpio_direction_output(struct gpio_chip *chip, - unsigned offset, int value) -{ - mxs_gpio_set(chip, offset, value); - mxs_set_gpio_direction(chip, offset, 1); - return 0; -} - -int __init mxs_gpio_init(struct mxs_gpio_port *port, int cnt) -{ - int i, j; - - /* save for local usage */ - mxs_gpio_ports = port; - gpio_table_size = cnt; - - pr_info("MXS GPIO hardware\n"); - - for (i = 0; i < cnt; i++) { - /* disable the interrupt and clear the status */ - __raw_writel(0, port[i].base + PINCTRL_PIN2IRQ(i)); - __raw_writel(0, port[i].base + PINCTRL_IRQEN(i)); - - /* clear address has to be used to clear IRQSTAT bits */ - __mxs_clrl(~0U, port[i].base + PINCTRL_IRQSTAT(i)); - - for (j = port[i].virtual_irq_start; - j < port[i].virtual_irq_start + 32; j++) { - irq_set_chip_and_handler(j, &gpio_irq_chip, - handle_level_irq); - set_irq_flags(j, IRQF_VALID); - } - - /* setup one handler for each entry */ - irq_set_chained_handler(port[i].irq, mxs_gpio_irq_handler); - irq_set_handler_data(port[i].irq, &port[i]); - - /* register gpio chip */ - port[i].chip.direction_input = mxs_gpio_direction_input; - port[i].chip.direction_output = mxs_gpio_direction_output; - port[i].chip.get = mxs_gpio_get; - port[i].chip.set = mxs_gpio_set; - port[i].chip.to_irq = mxs_gpio_to_irq; - port[i].chip.base = i * 32; - port[i].chip.ngpio = 32; - - /* its a serious configuration bug when it fails */ - BUG_ON(gpiochip_add(&port[i].chip) < 0); - } - - return 0; -} - -#define MX23_GPIO_BASE MX23_IO_ADDRESS(MX23_PINCTRL_BASE_ADDR) -#define MX28_GPIO_BASE MX28_IO_ADDRESS(MX28_PINCTRL_BASE_ADDR) - -#define DEFINE_MXS_GPIO_PORT(_base, _irq, _id) \ - { \ - .chip.label = "gpio-" #_id, \ - .id = _id, \ - .irq = _irq, \ - .base = _base, \ - .virtual_irq_start = MXS_GPIO_IRQ_START + (_id) * 32, \ - } - -#ifdef CONFIG_SOC_IMX23 -static struct mxs_gpio_port mx23_gpio_ports[] = { - DEFINE_MXS_GPIO_PORT(MX23_GPIO_BASE, MX23_INT_GPIO0, 0), - DEFINE_MXS_GPIO_PORT(MX23_GPIO_BASE, MX23_INT_GPIO1, 1), - DEFINE_MXS_GPIO_PORT(MX23_GPIO_BASE, MX23_INT_GPIO2, 2), -}; - -int __init mx23_register_gpios(void) -{ - return mxs_gpio_init(mx23_gpio_ports, ARRAY_SIZE(mx23_gpio_ports)); -} -#endif - -#ifdef CONFIG_SOC_IMX28 -static struct mxs_gpio_port mx28_gpio_ports[] = { - DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO0, 0), - DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO1, 1), - DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO2, 2), - DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO3, 3), - DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO4, 4), -}; - -int __init mx28_register_gpios(void) -{ - return mxs_gpio_init(mx28_gpio_ports, ARRAY_SIZE(mx28_gpio_ports)); -} -#endif diff --git a/arch/arm/mach-mxs/gpio.h b/arch/arm/mach-mxs/gpio.h deleted file mode 100644 index 005bb06630b1..000000000000 --- a/arch/arm/mach-mxs/gpio.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __MXS_GPIO_H__ -#define __MXS_GPIO_H__ - -struct mxs_gpio_port { - void __iomem *base; - int id; - int irq; - int irq_high; - int virtual_irq_start; - struct gpio_chip chip; -}; - -int mxs_gpio_init(struct mxs_gpio_port*, int); - -#endif /* __MXS_GPIO_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h b/arch/arm/mach-mxs/include/mach/devices-common.h index 7a37469ed5bf..812d7a813a78 100644 --- a/arch/arm/mach-mxs/include/mach/devices-common.h +++ b/arch/arm/mach-mxs/include/mach/devices-common.h @@ -11,6 +11,8 @@ #include <linux/init.h> #include <linux/amba/bus.h> +extern struct device mxs_apbh_bus; + struct platform_device *mxs_add_platform_device_dmamask( const char *name, int id, const struct resource *res, unsigned int num_resources, diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c index eacdc6b0e70a..56767a5cce0e 100644 --- a/arch/arm/mach-mxs/mach-mx28evk.c +++ b/arch/arm/mach-mxs/mach-mx28evk.c @@ -26,7 +26,6 @@ #include <mach/iomux-mx28.h> #include "devices-mx28.h" -#include "gpio.h" #define MX28EVK_FLEXCAN_SWITCH MXS_GPIO_NR(2, 13) #define MX28EVK_FEC_PHY_POWER MXS_GPIO_NR(2, 15) diff --git a/arch/arm/mach-mxs/mm-mx23.c b/arch/arm/mach-mxs/mm-mx23.c index 5148cd64a6b7..1b2345ac1a87 100644 --- a/arch/arm/mach-mxs/mm-mx23.c +++ b/arch/arm/mach-mxs/mm-mx23.c @@ -41,5 +41,4 @@ void __init mx23_map_io(void) void __init mx23_init_irq(void) { icoll_init_irq(); - mx23_register_gpios(); } diff --git a/arch/arm/mach-mxs/mm-mx28.c b/arch/arm/mach-mxs/mm-mx28.c index 7e4cea32ebc6..b6e18ddb92c0 100644 --- a/arch/arm/mach-mxs/mm-mx28.c +++ b/arch/arm/mach-mxs/mm-mx28.c @@ -41,5 +41,4 @@ void __init mx28_map_io(void) void __init mx28_init_irq(void) { icoll_init_irq(); - mx28_register_gpios(); } diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c index 364137c2042c..399da4ce017b 100644 --- a/arch/arm/mach-omap1/gpio15xx.c +++ b/arch/arm/mach-omap1/gpio15xx.c @@ -34,11 +34,22 @@ static struct __initdata resource omap15xx_mpu_gpio_resources[] = { }, }; +static struct omap_gpio_reg_offs omap15xx_mpuio_regs = { + .revision = USHRT_MAX, + .direction = OMAP_MPUIO_IO_CNTL, + .datain = OMAP_MPUIO_INPUT_LATCH, + .dataout = OMAP_MPUIO_OUTPUT, + .irqstatus = OMAP_MPUIO_GPIO_INT, + .irqenable = OMAP_MPUIO_GPIO_MASKIT, + .irqenable_inv = true, +}; + static struct __initdata omap_gpio_platform_data omap15xx_mpu_gpio_config = { .virtual_irq_start = IH_MPUIO_BASE, .bank_type = METHOD_MPUIO, .bank_width = 16, .bank_stride = 1, + .regs = &omap15xx_mpuio_regs, }; static struct platform_device omap15xx_mpu_gpio = { @@ -64,10 +75,21 @@ static struct __initdata resource omap15xx_gpio_resources[] = { }, }; +static struct omap_gpio_reg_offs omap15xx_gpio_regs = { + .revision = USHRT_MAX, + .direction = OMAP1510_GPIO_DIR_CONTROL, + .datain = OMAP1510_GPIO_DATA_INPUT, + .dataout = OMAP1510_GPIO_DATA_OUTPUT, + .irqstatus = OMAP1510_GPIO_INT_STATUS, + .irqenable = OMAP1510_GPIO_INT_MASK, + .irqenable_inv = true, +}; + static struct __initdata omap_gpio_platform_data omap15xx_gpio_config = { .virtual_irq_start = IH_GPIO_BASE, .bank_type = METHOD_GPIO_1510, .bank_width = 16, + .regs = &omap15xx_gpio_regs, }; static struct platform_device omap15xx_gpio = { diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c index 293a246e2824..0f399bd0e70e 100644 --- a/arch/arm/mach-omap1/gpio16xx.c +++ b/arch/arm/mach-omap1/gpio16xx.c @@ -37,11 +37,22 @@ static struct __initdata resource omap16xx_mpu_gpio_resources[] = { }, }; +static struct omap_gpio_reg_offs omap16xx_mpuio_regs = { + .revision = USHRT_MAX, + .direction = OMAP_MPUIO_IO_CNTL, + .datain = OMAP_MPUIO_INPUT_LATCH, + .dataout = OMAP_MPUIO_OUTPUT, + .irqstatus = OMAP_MPUIO_GPIO_INT, + .irqenable = OMAP_MPUIO_GPIO_MASKIT, + .irqenable_inv = true, +}; + static struct __initdata omap_gpio_platform_data omap16xx_mpu_gpio_config = { .virtual_irq_start = IH_MPUIO_BASE, .bank_type = METHOD_MPUIO, .bank_width = 16, .bank_stride = 1, + .regs = &omap16xx_mpuio_regs, }; static struct platform_device omap16xx_mpu_gpio = { @@ -67,10 +78,24 @@ static struct __initdata resource omap16xx_gpio1_resources[] = { }, }; +static struct omap_gpio_reg_offs omap16xx_gpio_regs = { + .revision = OMAP1610_GPIO_REVISION, + .direction = OMAP1610_GPIO_DIRECTION, + .set_dataout = OMAP1610_GPIO_SET_DATAOUT, + .clr_dataout = OMAP1610_GPIO_CLEAR_DATAOUT, + .datain = OMAP1610_GPIO_DATAIN, + .dataout = OMAP1610_GPIO_DATAOUT, + .irqstatus = OMAP1610_GPIO_IRQSTATUS1, + .irqenable = OMAP1610_GPIO_IRQENABLE1, + .set_irqenable = OMAP1610_GPIO_SET_IRQENABLE1, + .clr_irqenable = OMAP1610_GPIO_CLEAR_IRQENABLE1, +}; + static struct __initdata omap_gpio_platform_data omap16xx_gpio1_config = { .virtual_irq_start = IH_GPIO_BASE, .bank_type = METHOD_GPIO_1610, .bank_width = 16, + .regs = &omap16xx_gpio_regs, }; static struct platform_device omap16xx_gpio1 = { @@ -100,6 +125,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_gpio2_config = { .virtual_irq_start = IH_GPIO_BASE + 16, .bank_type = METHOD_GPIO_1610, .bank_width = 16, + .regs = &omap16xx_gpio_regs, }; static struct platform_device omap16xx_gpio2 = { @@ -129,6 +155,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_gpio3_config = { .virtual_irq_start = IH_GPIO_BASE + 32, .bank_type = METHOD_GPIO_1610, .bank_width = 16, + .regs = &omap16xx_gpio_regs, }; static struct platform_device omap16xx_gpio3 = { @@ -158,6 +185,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_gpio4_config = { .virtual_irq_start = IH_GPIO_BASE + 48, .bank_type = METHOD_GPIO_1610, .bank_width = 16, + .regs = &omap16xx_gpio_regs, }; static struct platform_device omap16xx_gpio4 = { diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c index c6ad248d63a6..5ab63eab0ff5 100644 --- a/arch/arm/mach-omap1/gpio7xx.c +++ b/arch/arm/mach-omap1/gpio7xx.c @@ -39,11 +39,22 @@ static struct __initdata resource omap7xx_mpu_gpio_resources[] = { }, }; +static struct omap_gpio_reg_offs omap7xx_mpuio_regs = { + .revision = USHRT_MAX, + .direction = OMAP_MPUIO_IO_CNTL / 2, + .datain = OMAP_MPUIO_INPUT_LATCH / 2, + .dataout = OMAP_MPUIO_OUTPUT / 2, + .irqstatus = OMAP_MPUIO_GPIO_INT / 2, + .irqenable = OMAP_MPUIO_GPIO_MASKIT / 2, + .irqenable_inv = true, +}; + static struct __initdata omap_gpio_platform_data omap7xx_mpu_gpio_config = { .virtual_irq_start = IH_MPUIO_BASE, .bank_type = METHOD_MPUIO, .bank_width = 32, .bank_stride = 2, + .regs = &omap7xx_mpuio_regs, }; static struct platform_device omap7xx_mpu_gpio = { @@ -69,10 +80,21 @@ static struct __initdata resource omap7xx_gpio1_resources[] = { }, }; +static struct omap_gpio_reg_offs omap7xx_gpio_regs = { + .revision = USHRT_MAX, + .direction = OMAP7XX_GPIO_DIR_CONTROL, + .datain = OMAP7XX_GPIO_DATA_INPUT, + .dataout = OMAP7XX_GPIO_DATA_OUTPUT, + .irqstatus = OMAP7XX_GPIO_INT_STATUS, + .irqenable = OMAP7XX_GPIO_INT_MASK, + .irqenable_inv = true, +}; + static struct __initdata omap_gpio_platform_data omap7xx_gpio1_config = { .virtual_irq_start = IH_GPIO_BASE, .bank_type = METHOD_GPIO_7XX, .bank_width = 32, + .regs = &omap7xx_gpio_regs, }; static struct platform_device omap7xx_gpio1 = { @@ -102,6 +124,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio2_config = { .virtual_irq_start = IH_GPIO_BASE + 32, .bank_type = METHOD_GPIO_7XX, .bank_width = 32, + .regs = &omap7xx_gpio_regs, }; static struct platform_device omap7xx_gpio2 = { @@ -131,6 +154,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio3_config = { .virtual_irq_start = IH_GPIO_BASE + 64, .bank_type = METHOD_GPIO_7XX, .bank_width = 32, + .regs = &omap7xx_gpio_regs, }; static struct platform_device omap7xx_gpio3 = { @@ -160,6 +184,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio4_config = { .virtual_irq_start = IH_GPIO_BASE + 96, .bank_type = METHOD_GPIO_7XX, .bank_width = 32, + .regs = &omap7xx_gpio_regs, }; static struct platform_device omap7xx_gpio4 = { @@ -189,6 +214,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio5_config = { .virtual_irq_start = IH_GPIO_BASE + 128, .bank_type = METHOD_GPIO_7XX, .bank_width = 32, + .regs = &omap7xx_gpio_regs, }; static struct platform_device omap7xx_gpio5 = { @@ -218,6 +244,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio6_config = { .virtual_irq_start = IH_GPIO_BASE + 160, .bank_type = METHOD_GPIO_7XX, .bank_width = 32, + .regs = &omap7xx_gpio_regs, }; static struct platform_device omap7xx_gpio6 = { diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c index 48e5eced6b51..2765cdc3152d 100644 --- a/arch/arm/mach-omap2/gpio.c +++ b/arch/arm/mach-omap2/gpio.c @@ -61,13 +61,45 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused) pdata->dbck_flag = dev_attr->dbck_flag; pdata->virtual_irq_start = IH_GPIO_BASE + 32 * (id - 1); + pdata->regs = kzalloc(sizeof(struct omap_gpio_reg_offs), GFP_KERNEL); + if (!pdata) { + pr_err("gpio%d: Memory allocation failed\n", id); + return -ENOMEM; + } + switch (oh->class->rev) { case 0: case 1: pdata->bank_type = METHOD_GPIO_24XX; + pdata->regs->revision = OMAP24XX_GPIO_REVISION; + pdata->regs->direction = OMAP24XX_GPIO_OE; + pdata->regs->datain = OMAP24XX_GPIO_DATAIN; + pdata->regs->dataout = OMAP24XX_GPIO_DATAOUT; + pdata->regs->set_dataout = OMAP24XX_GPIO_SETDATAOUT; + pdata->regs->clr_dataout = OMAP24XX_GPIO_CLEARDATAOUT; + pdata->regs->irqstatus = OMAP24XX_GPIO_IRQSTATUS1; + pdata->regs->irqstatus2 = OMAP24XX_GPIO_IRQSTATUS2; + pdata->regs->irqenable = OMAP24XX_GPIO_IRQENABLE1; + pdata->regs->set_irqenable = OMAP24XX_GPIO_SETIRQENABLE1; + pdata->regs->clr_irqenable = OMAP24XX_GPIO_CLEARIRQENABLE1; + pdata->regs->debounce = OMAP24XX_GPIO_DEBOUNCE_VAL; + pdata->regs->debounce_en = OMAP24XX_GPIO_DEBOUNCE_EN; break; case 2: pdata->bank_type = METHOD_GPIO_44XX; + pdata->regs->revision = OMAP4_GPIO_REVISION; + pdata->regs->direction = OMAP4_GPIO_OE; + pdata->regs->datain = OMAP4_GPIO_DATAIN; + pdata->regs->dataout = OMAP4_GPIO_DATAOUT; + pdata->regs->set_dataout = OMAP4_GPIO_SETDATAOUT; + pdata->regs->clr_dataout = OMAP4_GPIO_CLEARDATAOUT; + pdata->regs->irqstatus = OMAP4_GPIO_IRQSTATUS0; + pdata->regs->irqstatus2 = OMAP4_GPIO_IRQSTATUS1; + pdata->regs->irqenable = OMAP4_GPIO_IRQSTATUSSET0; + pdata->regs->set_irqenable = OMAP4_GPIO_IRQSTATUSSET0; + pdata->regs->clr_irqenable = OMAP4_GPIO_IRQSTATUSCLR0; + pdata->regs->debounce = OMAP4_GPIO_DEBOUNCINGTIME; + pdata->regs->debounce_en = OMAP4_GPIO_DEBOUNCENABLE; break; default: WARN(1, "Invalid gpio bank_type\n"); diff --git a/arch/arm/mach-s3c2410/include/mach/spi-gpio.h b/arch/arm/mach-s3c2410/include/mach/spi-gpio.h deleted file mode 100644 index dcef2287cb38..000000000000 --- a/arch/arm/mach-s3c2410/include/mach/spi-gpio.h +++ /dev/null @@ -1,28 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/spi-gpio.h - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2410 - SPI Controller platform_device info - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_SPIGPIO_H -#define __ASM_ARCH_SPIGPIO_H __FILE__ - -struct s3c2410_spigpio_info { - unsigned long pin_clk; - unsigned long pin_mosi; - unsigned long pin_miso; - - int num_chipselect; - int bus_num; - - void (*chip_select)(struct s3c2410_spigpio_info *spi, int cs); -}; - - -#endif /* __ASM_ARCH_SPIGPIO_H */ diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c index e8f49feef28c..f44f77531b1e 100644 --- a/arch/arm/mach-s3c2410/mach-qt2410.c +++ b/arch/arm/mach-s3c2410/mach-qt2410.c @@ -32,7 +32,7 @@ #include <linux/platform_device.h> #include <linux/serial_core.h> #include <linux/spi/spi.h> -#include <linux/spi/spi_bitbang.h> +#include <linux/spi/spi_gpio.h> #include <linux/io.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> @@ -53,8 +53,6 @@ #include <mach/fb.h> #include <plat/nand.h> #include <plat/udc.h> -#include <mach/spi.h> -#include <mach/spi-gpio.h> #include <plat/iic.h> #include <plat/common-smdk.h> @@ -216,32 +214,16 @@ static struct platform_device qt2410_led = { /* SPI */ -static void spi_gpio_cs(struct s3c2410_spigpio_info *spi, int cs) -{ - switch (cs) { - case BITBANG_CS_ACTIVE: - gpio_set_value(S3C2410_GPB(5), 0); - break; - case BITBANG_CS_INACTIVE: - gpio_set_value(S3C2410_GPB(5), 1); - break; - } -} - -static struct s3c2410_spigpio_info spi_gpio_cfg = { - .pin_clk = S3C2410_GPG(7), - .pin_mosi = S3C2410_GPG(6), - .pin_miso = S3C2410_GPG(5), - .chip_select = &spi_gpio_cs, +static struct spi_gpio_platform_data spi_gpio_cfg = { + .sck = S3C2410_GPG(7), + .mosi = S3C2410_GPG(6), + .miso = S3C2410_GPG(5), }; - static struct platform_device qt2410_spi = { - .name = "s3c24xx-spi-gpio", - .id = 1, - .dev = { - .platform_data = &spi_gpio_cfg, - }, + .name = "spi-gpio", + .id = 1, + .dev.platform_data = &spi_gpio_cfg, }; /* Board devices */ diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c index 85dcaeb9e62f..5eeb47580b0c 100644 --- a/arch/arm/mach-s3c2412/mach-jive.c +++ b/arch/arm/mach-s3c2412/mach-jive.c @@ -25,6 +25,7 @@ #include <video/ili9320.h> #include <linux/spi/spi.h> +#include <linux/spi/spi_gpio.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -38,7 +39,6 @@ #include <mach/regs-gpio.h> #include <mach/regs-mem.h> #include <mach/regs-lcd.h> -#include <mach/spi-gpio.h> #include <mach/fb.h> #include <asm/mach-types.h> @@ -389,45 +389,30 @@ static struct ili9320_platdata jive_lcm_config = { /* LCD SPI support */ -static void jive_lcd_spi_chipselect(struct s3c2410_spigpio_info *spi, int cs) -{ - gpio_set_value(S3C2410_GPB(7), cs ? 0 : 1); -} - -static struct s3c2410_spigpio_info jive_lcd_spi = { - .bus_num = 1, - .pin_clk = S3C2410_GPG(8), - .pin_mosi = S3C2410_GPB(8), - .num_chipselect = 1, - .chip_select = jive_lcd_spi_chipselect, +static struct spi_gpio_platform_data jive_lcd_spi = { + .sck = S3C2410_GPG(8), + .mosi = S3C2410_GPB(8), + .miso = SPI_GPIO_NO_MISO, }; static struct platform_device jive_device_lcdspi = { - .name = "spi_s3c24xx_gpio", + .name = "spi-gpio", .id = 1, - .num_resources = 0, .dev.platform_data = &jive_lcd_spi, }; -/* WM8750 audio code SPI definition */ -static void jive_wm8750_chipselect(struct s3c2410_spigpio_info *spi, int cs) -{ - gpio_set_value(S3C2410_GPH(10), cs ? 0 : 1); -} +/* WM8750 audio code SPI definition */ -static struct s3c2410_spigpio_info jive_wm8750_spi = { - .bus_num = 2, - .pin_clk = S3C2410_GPB(4), - .pin_mosi = S3C2410_GPB(9), - .num_chipselect = 1, - .chip_select = jive_wm8750_chipselect, +static struct spi_gpio_platform_data jive_wm8750_spi = { + .sck = S3C2410_GPB(4), + .mosi = S3C2410_GPB(9), + .miso = SPI_GPIO_NO_MISO, }; static struct platform_device jive_device_wm8750 = { - .name = "spi_s3c24xx_gpio", + .name = "spi-gpio", .id = 2, - .num_resources = 0, .dev.platform_data = &jive_wm8750_spi, }; @@ -441,12 +426,14 @@ static struct spi_board_info __initdata jive_spi_devs[] = { .mode = SPI_MODE_3, /* CPOL=1, CPHA=1 */ .max_speed_hz = 100000, .platform_data = &jive_lcm_config, + .controller_data = (void *)S3C2410_GPB(7), }, { .modalias = "WM8750", .bus_num = 2, .chip_select = 0, .mode = SPI_MODE_0, /* CPOL=0, CPHA=0 */ .max_speed_hz = 100000, + .controller_data = (void *)S3C2410_GPH(10), }, }; diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c index 716662008ce2..c10ddf4ed7f1 100644 --- a/arch/arm/mach-s3c2440/mach-gta02.c +++ b/arch/arm/mach-s3c2440/mach-gta02.c @@ -74,7 +74,6 @@ #include <mach/fb.h> #include <mach/spi.h> -#include <mach/spi-gpio.h> #include <plat/usb-control.h> #include <mach/regs-mem.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c index b197171e7d03..204bfafe4bfc 100644 --- a/arch/arm/mach-s3c64xx/dma.c +++ b/arch/arm/mach-s3c64xx/dma.c @@ -113,7 +113,7 @@ found: return chan; } -int s3c2410_dma_config(unsigned int channel, int xferunit) +int s3c2410_dma_config(enum dma_ch channel, int xferunit) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); @@ -297,7 +297,7 @@ static int s3c64xx_dma_flush(struct s3c2410_dma_chan *chan) return 0; } -int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op) +int s3c2410_dma_ctrl(enum dma_ch channel, enum s3c2410_chan_op op) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); @@ -331,7 +331,7 @@ EXPORT_SYMBOL(s3c2410_dma_ctrl); * */ -int s3c2410_dma_enqueue(unsigned int channel, void *id, +int s3c2410_dma_enqueue(enum dma_ch channel, void *id, dma_addr_t data, int size) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); @@ -415,7 +415,7 @@ err_buff: EXPORT_SYMBOL(s3c2410_dma_enqueue); -int s3c2410_dma_devconfig(unsigned int channel, +int s3c2410_dma_devconfig(enum dma_ch channel, enum s3c2410_dmasrc source, unsigned long devaddr) { @@ -463,7 +463,7 @@ int s3c2410_dma_devconfig(unsigned int channel, EXPORT_SYMBOL(s3c2410_dma_devconfig); -int s3c2410_dma_getposition(unsigned int channel, +int s3c2410_dma_getposition(enum dma_ch channel, dma_addr_t *src, dma_addr_t *dst) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); @@ -487,7 +487,7 @@ EXPORT_SYMBOL(s3c2410_dma_getposition); * get control of an dma channel */ -int s3c2410_dma_request(unsigned int channel, +int s3c2410_dma_request(enum dma_ch channel, struct s3c2410_dma_client *client, void *dev) { @@ -533,7 +533,7 @@ EXPORT_SYMBOL(s3c2410_dma_request); * allowed to go through. */ -int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *client) +int s3c2410_dma_free(enum dma_ch channel, struct s3c2410_dma_client *client) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); unsigned long flags; diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile index 823c703e573c..ed58ef9019b5 100644 --- a/arch/arm/mach-tegra/Makefile +++ b/arch/arm/mach-tegra/Makefile @@ -4,7 +4,6 @@ obj-y += io.o obj-y += irq.o obj-y += clock.o obj-y += timer.o -obj-y += gpio.o obj-y += pinmux.o obj-y += powergate.o obj-y += fuse.o diff --git a/arch/arm/mach-tegra/gpio.c b/arch/arm/mach-tegra/gpio.c deleted file mode 100644 index 919d63837736..000000000000 --- a/arch/arm/mach-tegra/gpio.c +++ /dev/null @@ -1,431 +0,0 @@ -/* - * arch/arm/mach-tegra/gpio.c - * - * Copyright (c) 2010 Google, Inc - * - * Author: - * Erik Gilling <konkers@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/interrupt.h> - -#include <linux/io.h> -#include <linux/gpio.h> - -#include <asm/mach/irq.h> - -#include <mach/iomap.h> -#include <mach/suspend.h> - -#define GPIO_BANK(x) ((x) >> 5) -#define GPIO_PORT(x) (((x) >> 3) & 0x3) -#define GPIO_BIT(x) ((x) & 0x7) - -#define GPIO_REG(x) (IO_TO_VIRT(TEGRA_GPIO_BASE) + \ - GPIO_BANK(x) * 0x80 + \ - GPIO_PORT(x) * 4) - -#define GPIO_CNF(x) (GPIO_REG(x) + 0x00) -#define GPIO_OE(x) (GPIO_REG(x) + 0x10) -#define GPIO_OUT(x) (GPIO_REG(x) + 0X20) -#define GPIO_IN(x) (GPIO_REG(x) + 0x30) -#define GPIO_INT_STA(x) (GPIO_REG(x) + 0x40) -#define GPIO_INT_ENB(x) (GPIO_REG(x) + 0x50) -#define GPIO_INT_LVL(x) (GPIO_REG(x) + 0x60) -#define GPIO_INT_CLR(x) (GPIO_REG(x) + 0x70) - -#define GPIO_MSK_CNF(x) (GPIO_REG(x) + 0x800) -#define GPIO_MSK_OE(x) (GPIO_REG(x) + 0x810) -#define GPIO_MSK_OUT(x) (GPIO_REG(x) + 0X820) -#define GPIO_MSK_INT_STA(x) (GPIO_REG(x) + 0x840) -#define GPIO_MSK_INT_ENB(x) (GPIO_REG(x) + 0x850) -#define GPIO_MSK_INT_LVL(x) (GPIO_REG(x) + 0x860) - -#define GPIO_INT_LVL_MASK 0x010101 -#define GPIO_INT_LVL_EDGE_RISING 0x000101 -#define GPIO_INT_LVL_EDGE_FALLING 0x000100 -#define GPIO_INT_LVL_EDGE_BOTH 0x010100 -#define GPIO_INT_LVL_LEVEL_HIGH 0x000001 -#define GPIO_INT_LVL_LEVEL_LOW 0x000000 - -struct tegra_gpio_bank { - int bank; - int irq; - spinlock_t lvl_lock[4]; -#ifdef CONFIG_PM - u32 cnf[4]; - u32 out[4]; - u32 oe[4]; - u32 int_enb[4]; - u32 int_lvl[4]; -#endif -}; - - -static struct tegra_gpio_bank tegra_gpio_banks[] = { - {.bank = 0, .irq = INT_GPIO1}, - {.bank = 1, .irq = INT_GPIO2}, - {.bank = 2, .irq = INT_GPIO3}, - {.bank = 3, .irq = INT_GPIO4}, - {.bank = 4, .irq = INT_GPIO5}, - {.bank = 5, .irq = INT_GPIO6}, - {.bank = 6, .irq = INT_GPIO7}, -}; - -static int tegra_gpio_compose(int bank, int port, int bit) -{ - return (bank << 5) | ((port & 0x3) << 3) | (bit & 0x7); -} - -static void tegra_gpio_mask_write(u32 reg, int gpio, int value) -{ - u32 val; - - val = 0x100 << GPIO_BIT(gpio); - if (value) - val |= 1 << GPIO_BIT(gpio); - __raw_writel(val, reg); -} - -void tegra_gpio_enable(int gpio) -{ - tegra_gpio_mask_write(GPIO_MSK_CNF(gpio), gpio, 1); -} - -void tegra_gpio_disable(int gpio) -{ - tegra_gpio_mask_write(GPIO_MSK_CNF(gpio), gpio, 0); -} - -static void tegra_gpio_set(struct gpio_chip *chip, unsigned offset, int value) -{ - tegra_gpio_mask_write(GPIO_MSK_OUT(offset), offset, value); -} - -static int tegra_gpio_get(struct gpio_chip *chip, unsigned offset) -{ - return (__raw_readl(GPIO_IN(offset)) >> GPIO_BIT(offset)) & 0x1; -} - -static int tegra_gpio_direction_input(struct gpio_chip *chip, unsigned offset) -{ - tegra_gpio_mask_write(GPIO_MSK_OE(offset), offset, 0); - return 0; -} - -static int tegra_gpio_direction_output(struct gpio_chip *chip, unsigned offset, - int value) -{ - tegra_gpio_set(chip, offset, value); - tegra_gpio_mask_write(GPIO_MSK_OE(offset), offset, 1); - return 0; -} - - - -static struct gpio_chip tegra_gpio_chip = { - .label = "tegra-gpio", - .direction_input = tegra_gpio_direction_input, - .get = tegra_gpio_get, - .direction_output = tegra_gpio_direction_output, - .set = tegra_gpio_set, - .base = 0, - .ngpio = TEGRA_NR_GPIOS, -}; - -static void tegra_gpio_irq_ack(struct irq_data *d) -{ - int gpio = d->irq - INT_GPIO_BASE; - - __raw_writel(1 << GPIO_BIT(gpio), GPIO_INT_CLR(gpio)); -} - -static void tegra_gpio_irq_mask(struct irq_data *d) -{ - int gpio = d->irq - INT_GPIO_BASE; - - tegra_gpio_mask_write(GPIO_MSK_INT_ENB(gpio), gpio, 0); -} - -static void tegra_gpio_irq_unmask(struct irq_data *d) -{ - int gpio = d->irq - INT_GPIO_BASE; - - tegra_gpio_mask_write(GPIO_MSK_INT_ENB(gpio), gpio, 1); -} - -static int tegra_gpio_irq_set_type(struct irq_data *d, unsigned int type) -{ - int gpio = d->irq - INT_GPIO_BASE; - struct tegra_gpio_bank *bank = irq_data_get_irq_chip_data(d); - int port = GPIO_PORT(gpio); - int lvl_type; - int val; - unsigned long flags; - - switch (type & IRQ_TYPE_SENSE_MASK) { - case IRQ_TYPE_EDGE_RISING: - lvl_type = GPIO_INT_LVL_EDGE_RISING; - break; - - case IRQ_TYPE_EDGE_FALLING: - lvl_type = GPIO_INT_LVL_EDGE_FALLING; - break; - - case IRQ_TYPE_EDGE_BOTH: - lvl_type = GPIO_INT_LVL_EDGE_BOTH; - break; - - case IRQ_TYPE_LEVEL_HIGH: - lvl_type = GPIO_INT_LVL_LEVEL_HIGH; - break; - - case IRQ_TYPE_LEVEL_LOW: - lvl_type = GPIO_INT_LVL_LEVEL_LOW; - break; - - default: - return -EINVAL; - } - - spin_lock_irqsave(&bank->lvl_lock[port], flags); - - val = __raw_readl(GPIO_INT_LVL(gpio)); - val &= ~(GPIO_INT_LVL_MASK << GPIO_BIT(gpio)); - val |= lvl_type << GPIO_BIT(gpio); - __raw_writel(val, GPIO_INT_LVL(gpio)); - - spin_unlock_irqrestore(&bank->lvl_lock[port], flags); - - if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH)) - __irq_set_handler_locked(d->irq, handle_level_irq); - else if (type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)) - __irq_set_handler_locked(d->irq, handle_edge_irq); - - return 0; -} - -static void tegra_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - struct tegra_gpio_bank *bank; - int port; - int pin; - int unmasked = 0; - struct irq_chip *chip = irq_desc_get_chip(desc); - - chained_irq_enter(chip, desc); - - bank = irq_get_handler_data(irq); - - for (port = 0; port < 4; port++) { - int gpio = tegra_gpio_compose(bank->bank, port, 0); - unsigned long sta = __raw_readl(GPIO_INT_STA(gpio)) & - __raw_readl(GPIO_INT_ENB(gpio)); - u32 lvl = __raw_readl(GPIO_INT_LVL(gpio)); - - for_each_set_bit(pin, &sta, 8) { - __raw_writel(1 << pin, GPIO_INT_CLR(gpio)); - - /* if gpio is edge triggered, clear condition - * before executing the hander so that we don't - * miss edges - */ - if (lvl & (0x100 << pin)) { - unmasked = 1; - chained_irq_exit(chip, desc); - } - - generic_handle_irq(gpio_to_irq(gpio + pin)); - } - } - - if (!unmasked) - chained_irq_exit(chip, desc); - -} - -#ifdef CONFIG_PM -void tegra_gpio_resume(void) -{ - unsigned long flags; - int b; - int p; - - local_irq_save(flags); - - for (b = 0; b < ARRAY_SIZE(tegra_gpio_banks); b++) { - struct tegra_gpio_bank *bank = &tegra_gpio_banks[b]; - - for (p = 0; p < ARRAY_SIZE(bank->oe); p++) { - unsigned int gpio = (b<<5) | (p<<3); - __raw_writel(bank->cnf[p], GPIO_CNF(gpio)); - __raw_writel(bank->out[p], GPIO_OUT(gpio)); - __raw_writel(bank->oe[p], GPIO_OE(gpio)); - __raw_writel(bank->int_lvl[p], GPIO_INT_LVL(gpio)); - __raw_writel(bank->int_enb[p], GPIO_INT_ENB(gpio)); - } - } - - local_irq_restore(flags); -} - -void tegra_gpio_suspend(void) -{ - unsigned long flags; - int b; - int p; - - local_irq_save(flags); - for (b = 0; b < ARRAY_SIZE(tegra_gpio_banks); b++) { - struct tegra_gpio_bank *bank = &tegra_gpio_banks[b]; - - for (p = 0; p < ARRAY_SIZE(bank->oe); p++) { - unsigned int gpio = (b<<5) | (p<<3); - bank->cnf[p] = __raw_readl(GPIO_CNF(gpio)); - bank->out[p] = __raw_readl(GPIO_OUT(gpio)); - bank->oe[p] = __raw_readl(GPIO_OE(gpio)); - bank->int_enb[p] = __raw_readl(GPIO_INT_ENB(gpio)); - bank->int_lvl[p] = __raw_readl(GPIO_INT_LVL(gpio)); - } - } - local_irq_restore(flags); -} - -static int tegra_gpio_wake_enable(struct irq_data *d, unsigned int enable) -{ - struct tegra_gpio_bank *bank = irq_data_get_irq_chip_data(d); - return irq_set_irq_wake(bank->irq, enable); -} -#endif - -static struct irq_chip tegra_gpio_irq_chip = { - .name = "GPIO", - .irq_ack = tegra_gpio_irq_ack, - .irq_mask = tegra_gpio_irq_mask, - .irq_unmask = tegra_gpio_irq_unmask, - .irq_set_type = tegra_gpio_irq_set_type, -#ifdef CONFIG_PM - .irq_set_wake = tegra_gpio_wake_enable, -#endif -}; - - -/* This lock class tells lockdep that GPIO irqs are in a different - * category than their parents, so it won't report false recursion. - */ -static struct lock_class_key gpio_lock_class; - -static int __init tegra_gpio_init(void) -{ - struct tegra_gpio_bank *bank; - int i; - int j; - - for (i = 0; i < 7; i++) { - for (j = 0; j < 4; j++) { - int gpio = tegra_gpio_compose(i, j, 0); - __raw_writel(0x00, GPIO_INT_ENB(gpio)); - } - } - - gpiochip_add(&tegra_gpio_chip); - - for (i = INT_GPIO_BASE; i < (INT_GPIO_BASE + TEGRA_NR_GPIOS); i++) { - bank = &tegra_gpio_banks[GPIO_BANK(irq_to_gpio(i))]; - - irq_set_lockdep_class(i, &gpio_lock_class); - irq_set_chip_data(i, bank); - irq_set_chip_and_handler(i, &tegra_gpio_irq_chip, - handle_simple_irq); - set_irq_flags(i, IRQF_VALID); - } - - for (i = 0; i < ARRAY_SIZE(tegra_gpio_banks); i++) { - bank = &tegra_gpio_banks[i]; - - irq_set_chained_handler(bank->irq, tegra_gpio_irq_handler); - irq_set_handler_data(bank->irq, bank); - - for (j = 0; j < 4; j++) - spin_lock_init(&bank->lvl_lock[j]); - } - - return 0; -} - -postcore_initcall(tegra_gpio_init); - -void __init tegra_gpio_config(struct tegra_gpio_table *table, int num) -{ - int i; - - for (i = 0; i < num; i++) { - int gpio = table[i].gpio; - - if (table[i].enable) - tegra_gpio_enable(gpio); - else - tegra_gpio_disable(gpio); - } -} - -#ifdef CONFIG_DEBUG_FS - -#include <linux/debugfs.h> -#include <linux/seq_file.h> - -static int dbg_gpio_show(struct seq_file *s, void *unused) -{ - int i; - int j; - - for (i = 0; i < 7; i++) { - for (j = 0; j < 4; j++) { - int gpio = tegra_gpio_compose(i, j, 0); - seq_printf(s, - "%d:%d %02x %02x %02x %02x %02x %02x %06x\n", - i, j, - __raw_readl(GPIO_CNF(gpio)), - __raw_readl(GPIO_OE(gpio)), - __raw_readl(GPIO_OUT(gpio)), - __raw_readl(GPIO_IN(gpio)), - __raw_readl(GPIO_INT_STA(gpio)), - __raw_readl(GPIO_INT_ENB(gpio)), - __raw_readl(GPIO_INT_LVL(gpio))); - } - } - return 0; -} - -static int dbg_gpio_open(struct inode *inode, struct file *file) -{ - return single_open(file, dbg_gpio_show, &inode->i_private); -} - -static const struct file_operations debug_fops = { - .open = dbg_gpio_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static int __init tegra_gpio_debuginit(void) -{ - (void) debugfs_create_file("tegra_gpio", S_IRUGO, - NULL, NULL, &debug_fops); - return 0; -} -late_initcall(tegra_gpio_debuginit); -#endif diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile index a1387875a491..d53c35fe2ea7 100644 --- a/arch/arm/plat-mxc/Makefile +++ b/arch/arm/plat-mxc/Makefile @@ -3,7 +3,7 @@ # # Common support -obj-y := clock.o gpio.o time.o devices.o cpu.o system.o irq-common.o +obj-y := clock.o time.o devices.o cpu.o system.o irq-common.o # MX51 uses the TZIC interrupt controller, older platforms use AVIC obj-$(CONFIG_MXC_TZIC) += tzic.o diff --git a/arch/arm/plat-mxc/devices.c b/arch/arm/plat-mxc/devices.c index eee1b6096a08..fb166b20f60f 100644 --- a/arch/arm/plat-mxc/devices.c +++ b/arch/arm/plat-mxc/devices.c @@ -89,3 +89,14 @@ err: return pdev; } + +struct device mxc_aips_bus = { + .init_name = "mxc_aips", + .parent = &platform_bus, +}; + +static int __init mxc_device_init(void) +{ + return device_register(&mxc_aips_bus); +} +core_initcall(mxc_device_init); diff --git a/arch/arm/plat-mxc/devices/Makefile b/arch/arm/plat-mxc/devices/Makefile index ad2922acf480..b41bf972b54b 100644 --- a/arch/arm/plat-mxc/devices/Makefile +++ b/arch/arm/plat-mxc/devices/Makefile @@ -2,6 +2,7 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_FEC) += platform-fec.o obj-$(CONFIG_IMX_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o obj-$(CONFIG_IMX_HAVE_PLATFORM_FSL_USB2_UDC) += platform-fsl-usb2-udc.o obj-$(CONFIG_IMX_HAVE_PLATFORM_GPIO_KEYS) += platform-gpio_keys.o +obj-y += platform-gpio-mxc.o obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX21_HCD) += platform-imx21-hcd.o obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX2_WDT) += platform-imx2-wdt.o obj-$(CONFIG_IMX_HAVE_PLATFORM_IMXDI_RTC) += platform-imxdi_rtc.o diff --git a/arch/arm/plat-mxc/devices/platform-fec.c b/arch/arm/plat-mxc/devices/platform-fec.c index ccc789e21daa..4fc6ffc2a13e 100644 --- a/arch/arm/plat-mxc/devices/platform-fec.c +++ b/arch/arm/plat-mxc/devices/platform-fec.c @@ -6,6 +6,7 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ +#include <linux/dma-mapping.h> #include <asm/sizes.h> #include <mach/hardware.h> #include <mach/devices-common.h> diff --git a/arch/arm/plat-mxc/devices/platform-fsl-usb2-udc.c b/arch/arm/plat-mxc/devices/platform-fsl-usb2-udc.c index 59c33f6e401c..23ce08e6ffd2 100644 --- a/arch/arm/plat-mxc/devices/platform-fsl-usb2-udc.c +++ b/arch/arm/plat-mxc/devices/platform-fsl-usb2-udc.c @@ -6,6 +6,7 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ +#include <linux/dma-mapping.h> #include <mach/hardware.h> #include <mach/devices-common.h> diff --git a/arch/arm/plat-mxc/devices/platform-gpio-mxc.c b/arch/arm/plat-mxc/devices/platform-gpio-mxc.c new file mode 100644 index 000000000000..a7919a241032 --- /dev/null +++ b/arch/arm/plat-mxc/devices/platform-gpio-mxc.c @@ -0,0 +1,32 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2011 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <mach/devices-common.h> + +struct platform_device *__init mxc_register_gpio(char *name, int id, + resource_size_t iobase, resource_size_t iosize, int irq, int irq_high) +{ + struct resource res[] = { + { + .start = iobase, + .end = iobase + iosize - 1, + .flags = IORESOURCE_MEM, + }, { + .start = irq, + .end = irq, + .flags = IORESOURCE_IRQ, + }, { + .start = irq_high, + .end = irq_high, + .flags = IORESOURCE_IRQ, + }, + }; + + return platform_device_register_resndata(&mxc_aips_bus, + name, id, res, ARRAY_SIZE(res), NULL, 0); +} diff --git a/arch/arm/plat-mxc/devices/platform-imx-fb.c b/arch/arm/plat-mxc/devices/platform-imx-fb.c index 79a1cb18a5b0..2b0b5e0aa998 100644 --- a/arch/arm/plat-mxc/devices/platform-imx-fb.c +++ b/arch/arm/plat-mxc/devices/platform-imx-fb.c @@ -6,6 +6,7 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ +#include <linux/dma-mapping.h> #include <mach/hardware.h> #include <mach/devices-common.h> diff --git a/arch/arm/plat-mxc/devices/platform-ipu-core.c b/arch/arm/plat-mxc/devices/platform-ipu-core.c index edf65034aea5..79d340ae0af1 100644 --- a/arch/arm/plat-mxc/devices/platform-ipu-core.c +++ b/arch/arm/plat-mxc/devices/platform-ipu-core.c @@ -6,6 +6,7 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ +#include <linux/dma-mapping.h> #include <mach/hardware.h> #include <mach/devices-common.h> diff --git a/arch/arm/plat-mxc/devices/platform-mxc-ehci.c b/arch/arm/plat-mxc/devices/platform-mxc-ehci.c index cc488f4b6204..e1763e03e7cb 100644 --- a/arch/arm/plat-mxc/devices/platform-mxc-ehci.c +++ b/arch/arm/plat-mxc/devices/platform-mxc-ehci.c @@ -6,6 +6,7 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ +#include <linux/dma-mapping.h> #include <mach/hardware.h> #include <mach/devices-common.h> diff --git a/arch/arm/plat-mxc/devices/platform-mxc-mmc.c b/arch/arm/plat-mxc/devices/platform-mxc-mmc.c index 90d762f6f93b..540d3a7d92df 100644 --- a/arch/arm/plat-mxc/devices/platform-mxc-mmc.c +++ b/arch/arm/plat-mxc/devices/platform-mxc-mmc.c @@ -6,6 +6,7 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ +#include <linux/dma-mapping.h> #include <mach/hardware.h> #include <mach/devices-common.h> diff --git a/arch/arm/plat-mxc/devices/platform-spi_imx.c b/arch/arm/plat-mxc/devices/platform-spi_imx.c index f97eb3615b2c..9bfae8bd5b8d 100644 --- a/arch/arm/plat-mxc/devices/platform-spi_imx.c +++ b/arch/arm/plat-mxc/devices/platform-spi_imx.c @@ -40,9 +40,10 @@ const struct imx_spi_imx_data imx21_cspi_data[] __initconst = { #endif #ifdef CONFIG_SOC_IMX25 +/* i.mx25 has the i.mx35 type cspi */ const struct imx_spi_imx_data imx25_cspi_data[] __initconst = { #define imx25_cspi_data_entry(_id, _hwid) \ - imx_spi_imx_data_entry(MX25, CSPI, "imx25-cspi", _id, _hwid, SZ_16K) + imx_spi_imx_data_entry(MX25, CSPI, "imx35-cspi", _id, _hwid, SZ_16K) imx25_cspi_data_entry(0, 1), imx25_cspi_data_entry(1, 2), imx25_cspi_data_entry(2, 3), @@ -79,8 +80,9 @@ const struct imx_spi_imx_data imx35_cspi_data[] __initconst = { #endif /* ifdef CONFIG_SOC_IMX35 */ #ifdef CONFIG_SOC_IMX51 +/* i.mx51 has the i.mx35 type cspi */ const struct imx_spi_imx_data imx51_cspi_data __initconst = - imx_spi_imx_data_entry_single(MX51, CSPI, "imx51-cspi", 2, , SZ_4K); + imx_spi_imx_data_entry_single(MX51, CSPI, "imx35-cspi", 2, , SZ_4K); const struct imx_spi_imx_data imx51_ecspi_data[] __initconst = { #define imx51_ecspi_data_entry(_id, _hwid) \ @@ -91,12 +93,14 @@ const struct imx_spi_imx_data imx51_ecspi_data[] __initconst = { #endif /* ifdef CONFIG_SOC_IMX51 */ #ifdef CONFIG_SOC_IMX53 +/* i.mx53 has the i.mx35 type cspi */ const struct imx_spi_imx_data imx53_cspi_data __initconst = - imx_spi_imx_data_entry_single(MX53, CSPI, "imx53-cspi", 0, , SZ_4K); + imx_spi_imx_data_entry_single(MX53, CSPI, "imx35-cspi", 0, , SZ_4K); +/* i.mx53 has the i.mx51 type ecspi */ const struct imx_spi_imx_data imx53_ecspi_data[] __initconst = { #define imx53_ecspi_data_entry(_id, _hwid) \ - imx_spi_imx_data_entry(MX53, ECSPI, "imx53-ecspi", _id, _hwid, SZ_4K) + imx_spi_imx_data_entry(MX53, ECSPI, "imx51-ecspi", _id, _hwid, SZ_4K) imx53_ecspi_data_entry(0, 1), imx53_ecspi_data_entry(1, 2), }; diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c deleted file mode 100644 index 6cd6d7f686f6..000000000000 --- a/arch/arm/plat-mxc/gpio.c +++ /dev/null @@ -1,361 +0,0 @@ -/* - * MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de> - * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * - * Based on code from Freescale, - * Copyright (C) 2004-2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - */ - -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/io.h> -#include <linux/irq.h> -#include <linux/gpio.h> -#include <mach/hardware.h> -#include <asm-generic/bug.h> - -static struct mxc_gpio_port *mxc_gpio_ports; -static int gpio_table_size; - -#define cpu_is_mx1_mx2() (cpu_is_mx1() || cpu_is_mx2()) - -#define GPIO_DR (cpu_is_mx1_mx2() ? 0x1c : 0x00) -#define GPIO_GDIR (cpu_is_mx1_mx2() ? 0x00 : 0x04) -#define GPIO_PSR (cpu_is_mx1_mx2() ? 0x24 : 0x08) -#define GPIO_ICR1 (cpu_is_mx1_mx2() ? 0x28 : 0x0C) -#define GPIO_ICR2 (cpu_is_mx1_mx2() ? 0x2C : 0x10) -#define GPIO_IMR (cpu_is_mx1_mx2() ? 0x30 : 0x14) -#define GPIO_ISR (cpu_is_mx1_mx2() ? 0x34 : 0x18) - -#define GPIO_INT_LOW_LEV (cpu_is_mx1_mx2() ? 0x3 : 0x0) -#define GPIO_INT_HIGH_LEV (cpu_is_mx1_mx2() ? 0x2 : 0x1) -#define GPIO_INT_RISE_EDGE (cpu_is_mx1_mx2() ? 0x0 : 0x2) -#define GPIO_INT_FALL_EDGE (cpu_is_mx1_mx2() ? 0x1 : 0x3) -#define GPIO_INT_NONE 0x4 - -/* Note: This driver assumes 32 GPIOs are handled in one register */ - -static void _clear_gpio_irqstatus(struct mxc_gpio_port *port, u32 index) -{ - __raw_writel(1 << index, port->base + GPIO_ISR); -} - -static void _set_gpio_irqenable(struct mxc_gpio_port *port, u32 index, - int enable) -{ - u32 l; - - l = __raw_readl(port->base + GPIO_IMR); - l = (l & (~(1 << index))) | (!!enable << index); - __raw_writel(l, port->base + GPIO_IMR); -} - -static void gpio_ack_irq(struct irq_data *d) -{ - u32 gpio = irq_to_gpio(d->irq); - _clear_gpio_irqstatus(&mxc_gpio_ports[gpio / 32], gpio & 0x1f); -} - -static void gpio_mask_irq(struct irq_data *d) -{ - u32 gpio = irq_to_gpio(d->irq); - _set_gpio_irqenable(&mxc_gpio_ports[gpio / 32], gpio & 0x1f, 0); -} - -static void gpio_unmask_irq(struct irq_data *d) -{ - u32 gpio = irq_to_gpio(d->irq); - _set_gpio_irqenable(&mxc_gpio_ports[gpio / 32], gpio & 0x1f, 1); -} - -static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset); - -static int gpio_set_irq_type(struct irq_data *d, u32 type) -{ - u32 gpio = irq_to_gpio(d->irq); - struct mxc_gpio_port *port = &mxc_gpio_ports[gpio / 32]; - u32 bit, val; - int edge; - void __iomem *reg = port->base; - - port->both_edges &= ~(1 << (gpio & 31)); - switch (type) { - case IRQ_TYPE_EDGE_RISING: - edge = GPIO_INT_RISE_EDGE; - break; - case IRQ_TYPE_EDGE_FALLING: - edge = GPIO_INT_FALL_EDGE; - break; - case IRQ_TYPE_EDGE_BOTH: - val = mxc_gpio_get(&port->chip, gpio & 31); - if (val) { - edge = GPIO_INT_LOW_LEV; - pr_debug("mxc: set GPIO %d to low trigger\n", gpio); - } else { - edge = GPIO_INT_HIGH_LEV; - pr_debug("mxc: set GPIO %d to high trigger\n", gpio); - } - port->both_edges |= 1 << (gpio & 31); - break; - case IRQ_TYPE_LEVEL_LOW: - edge = GPIO_INT_LOW_LEV; - break; - case IRQ_TYPE_LEVEL_HIGH: - edge = GPIO_INT_HIGH_LEV; - break; - default: - return -EINVAL; - } - - reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */ - bit = gpio & 0xf; - val = __raw_readl(reg) & ~(0x3 << (bit << 1)); - __raw_writel(val | (edge << (bit << 1)), reg); - _clear_gpio_irqstatus(port, gpio & 0x1f); - - return 0; -} - -static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio) -{ - void __iomem *reg = port->base; - u32 bit, val; - int edge; - - reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */ - bit = gpio & 0xf; - val = __raw_readl(reg); - edge = (val >> (bit << 1)) & 3; - val &= ~(0x3 << (bit << 1)); - if (edge == GPIO_INT_HIGH_LEV) { - edge = GPIO_INT_LOW_LEV; - pr_debug("mxc: switch GPIO %d to low trigger\n", gpio); - } else if (edge == GPIO_INT_LOW_LEV) { - edge = GPIO_INT_HIGH_LEV; - pr_debug("mxc: switch GPIO %d to high trigger\n", gpio); - } else { - pr_err("mxc: invalid configuration for GPIO %d: %x\n", - gpio, edge); - return; - } - __raw_writel(val | (edge << (bit << 1)), reg); -} - -/* handle 32 interrupts in one status register */ -static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat) -{ - u32 gpio_irq_no_base = port->virtual_irq_start; - - while (irq_stat != 0) { - int irqoffset = fls(irq_stat) - 1; - - if (port->both_edges & (1 << irqoffset)) - mxc_flip_edge(port, irqoffset); - - generic_handle_irq(gpio_irq_no_base + irqoffset); - - irq_stat &= ~(1 << irqoffset); - } -} - -/* MX1 and MX3 has one interrupt *per* gpio port */ -static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc) -{ - u32 irq_stat; - struct mxc_gpio_port *port = irq_get_handler_data(irq); - - irq_stat = __raw_readl(port->base + GPIO_ISR) & - __raw_readl(port->base + GPIO_IMR); - - mxc_gpio_irq_handler(port, irq_stat); -} - -/* MX2 has one interrupt *for all* gpio ports */ -static void mx2_gpio_irq_handler(u32 irq, struct irq_desc *desc) -{ - int i; - u32 irq_msk, irq_stat; - struct mxc_gpio_port *port = irq_get_handler_data(irq); - - /* walk through all interrupt status registers */ - for (i = 0; i < gpio_table_size; i++) { - irq_msk = __raw_readl(port[i].base + GPIO_IMR); - if (!irq_msk) - continue; - - irq_stat = __raw_readl(port[i].base + GPIO_ISR) & irq_msk; - if (irq_stat) - mxc_gpio_irq_handler(&port[i], irq_stat); - } -} - -/* - * Set interrupt number "irq" in the GPIO as a wake-up source. - * While system is running, all registered GPIO interrupts need to have - * wake-up enabled. When system is suspended, only selected GPIO interrupts - * need to have wake-up enabled. - * @param irq interrupt source number - * @param enable enable as wake-up if equal to non-zero - * @return This function returns 0 on success. - */ -static int gpio_set_wake_irq(struct irq_data *d, u32 enable) -{ - u32 gpio = irq_to_gpio(d->irq); - u32 gpio_idx = gpio & 0x1F; - struct mxc_gpio_port *port = &mxc_gpio_ports[gpio / 32]; - - if (enable) { - if (port->irq_high && (gpio_idx >= 16)) - enable_irq_wake(port->irq_high); - else - enable_irq_wake(port->irq); - } else { - if (port->irq_high && (gpio_idx >= 16)) - disable_irq_wake(port->irq_high); - else - disable_irq_wake(port->irq); - } - - return 0; -} - -static struct irq_chip gpio_irq_chip = { - .name = "GPIO", - .irq_ack = gpio_ack_irq, - .irq_mask = gpio_mask_irq, - .irq_unmask = gpio_unmask_irq, - .irq_set_type = gpio_set_irq_type, - .irq_set_wake = gpio_set_wake_irq, -}; - -static void _set_gpio_direction(struct gpio_chip *chip, unsigned offset, - int dir) -{ - struct mxc_gpio_port *port = - container_of(chip, struct mxc_gpio_port, chip); - u32 l; - unsigned long flags; - - spin_lock_irqsave(&port->lock, flags); - l = __raw_readl(port->base + GPIO_GDIR); - if (dir) - l |= 1 << offset; - else - l &= ~(1 << offset); - __raw_writel(l, port->base + GPIO_GDIR); - spin_unlock_irqrestore(&port->lock, flags); -} - -static void mxc_gpio_set(struct gpio_chip *chip, unsigned offset, int value) -{ - struct mxc_gpio_port *port = - container_of(chip, struct mxc_gpio_port, chip); - void __iomem *reg = port->base + GPIO_DR; - u32 l; - unsigned long flags; - - spin_lock_irqsave(&port->lock, flags); - l = (__raw_readl(reg) & (~(1 << offset))) | (!!value << offset); - __raw_writel(l, reg); - spin_unlock_irqrestore(&port->lock, flags); -} - -static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset) -{ - struct mxc_gpio_port *port = - container_of(chip, struct mxc_gpio_port, chip); - - return (__raw_readl(port->base + GPIO_PSR) >> offset) & 1; -} - -static int mxc_gpio_direction_input(struct gpio_chip *chip, unsigned offset) -{ - _set_gpio_direction(chip, offset, 0); - return 0; -} - -static int mxc_gpio_direction_output(struct gpio_chip *chip, - unsigned offset, int value) -{ - mxc_gpio_set(chip, offset, value); - _set_gpio_direction(chip, offset, 1); - return 0; -} - -/* - * This lock class tells lockdep that GPIO irqs are in a different - * category than their parents, so it won't report false recursion. - */ -static struct lock_class_key gpio_lock_class; - -int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt) -{ - int i, j; - - /* save for local usage */ - mxc_gpio_ports = port; - gpio_table_size = cnt; - - printk(KERN_INFO "MXC GPIO hardware\n"); - - for (i = 0; i < cnt; i++) { - /* disable the interrupt and clear the status */ - __raw_writel(0, port[i].base + GPIO_IMR); - __raw_writel(~0, port[i].base + GPIO_ISR); - for (j = port[i].virtual_irq_start; - j < port[i].virtual_irq_start + 32; j++) { - irq_set_lockdep_class(j, &gpio_lock_class); - irq_set_chip_and_handler(j, &gpio_irq_chip, - handle_level_irq); - set_irq_flags(j, IRQF_VALID); - } - - /* register gpio chip */ - port[i].chip.direction_input = mxc_gpio_direction_input; - port[i].chip.direction_output = mxc_gpio_direction_output; - port[i].chip.get = mxc_gpio_get; - port[i].chip.set = mxc_gpio_set; - port[i].chip.base = i * 32; - port[i].chip.ngpio = 32; - - spin_lock_init(&port[i].lock); - - /* its a serious configuration bug when it fails */ - BUG_ON( gpiochip_add(&port[i].chip) < 0 ); - - if (cpu_is_mx1() || cpu_is_mx3() || cpu_is_mx25() || cpu_is_mx51()) { - /* setup one handler for each entry */ - irq_set_chained_handler(port[i].irq, - mx3_gpio_irq_handler); - irq_set_handler_data(port[i].irq, &port[i]); - if (port[i].irq_high) { - /* setup handler for GPIO 16 to 31 */ - irq_set_chained_handler(port[i].irq_high, - mx3_gpio_irq_handler); - irq_set_handler_data(port[i].irq_high, - &port[i]); - } - } - } - - if (cpu_is_mx2()) { - /* setup one handler for all GPIO interrupts */ - irq_set_chained_handler(port[0].irq, mx2_gpio_irq_handler); - irq_set_handler_data(port[0].irq, port); - } - - return 0; -} diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h index da7991832af6..4e3d97890d69 100644 --- a/arch/arm/plat-mxc/include/mach/common.h +++ b/arch/arm/plat-mxc/include/mach/common.h @@ -43,6 +43,15 @@ extern void mx35_init_irq(void); extern void mx50_init_irq(void); extern void mx51_init_irq(void); extern void mx53_init_irq(void); +extern void imx1_soc_init(void); +extern void imx21_soc_init(void); +extern void imx25_soc_init(void); +extern void imx27_soc_init(void); +extern void imx31_soc_init(void); +extern void imx35_soc_init(void); +extern void imx50_soc_init(void); +extern void imx51_soc_init(void); +extern void imx53_soc_init(void); extern void epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq); extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int); extern int mx1_clocks_init(unsigned long fref); @@ -55,7 +64,8 @@ extern int mx51_clocks_init(unsigned long ckil, unsigned long osc, unsigned long ckih1, unsigned long ckih2); extern int mx53_clocks_init(unsigned long ckil, unsigned long osc, unsigned long ckih1, unsigned long ckih2); -extern int mxc_register_gpios(void); +extern struct platform_device *mxc_register_gpio(char *name, int id, + resource_size_t iobase, resource_size_t iosize, int irq, int irq_high); extern int mxc_register_device(struct platform_device *pdev, void *data); extern void mxc_set_cpu_type(unsigned int type); extern void mxc_arch_reset_init(void __iomem *); diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/plat-mxc/include/mach/devices-common.h index fa8477337f91..03f626645374 100644 --- a/arch/arm/plat-mxc/include/mach/devices-common.h +++ b/arch/arm/plat-mxc/include/mach/devices-common.h @@ -10,6 +10,8 @@ #include <linux/platform_device.h> #include <linux/init.h> +extern struct device mxc_aips_bus; + struct platform_device *imx_add_platform_device_dmamask( const char *name, int id, const struct resource *res, unsigned int num_resources, diff --git a/arch/arm/plat-mxc/include/mach/gpio.h b/arch/arm/plat-mxc/include/mach/gpio.h index a2747f12813e..31c820c1b796 100644 --- a/arch/arm/plat-mxc/include/mach/gpio.h +++ b/arch/arm/plat-mxc/include/mach/gpio.h @@ -36,31 +36,4 @@ #define gpio_to_irq(gpio) (MXC_GPIO_IRQ_START + (gpio)) #define irq_to_gpio(irq) ((irq) - MXC_GPIO_IRQ_START) -struct mxc_gpio_port { - void __iomem *base; - int irq; - int irq_high; - int virtual_irq_start; - struct gpio_chip chip; - u32 both_edges; - spinlock_t lock; -}; - -#define DEFINE_IMX_GPIO_PORT_IRQ_HIGH(soc, _id, _hwid, _irq, _irq_high) \ - { \ - .chip.label = "gpio-" #_id, \ - .irq = _irq, \ - .irq_high = _irq_high, \ - .base = soc ## _IO_ADDRESS( \ - soc ## _GPIO ## _hwid ## _BASE_ADDR), \ - .virtual_irq_start = MXC_GPIO_IRQ_START + (_id) * 32, \ - } - -#define DEFINE_IMX_GPIO_PORT_IRQ(soc, _id, _hwid, _irq) \ - DEFINE_IMX_GPIO_PORT_IRQ_HIGH(soc, _id, _hwid, _irq, 0) -#define DEFINE_IMX_GPIO_PORT(soc, _id, _hwid) \ - DEFINE_IMX_GPIO_PORT_IRQ(soc, _id, _hwid, 0) - -int mxc_gpio_init(struct mxc_gpio_port*, int); - #endif diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h index 35c89bcdf758..00e812bbd81d 100644 --- a/arch/arm/plat-mxc/include/mach/irqs.h +++ b/arch/arm/plat-mxc/include/mach/irqs.h @@ -11,6 +11,8 @@ #ifndef __ASM_ARCH_MXC_IRQS_H__ #define __ASM_ARCH_MXC_IRQS_H__ +#include <asm-generic/gpio.h> + /* * SoCs with TZIC interrupt controller have 128 IRQs, those with AVIC have 64 */ @@ -22,30 +24,13 @@ #define MXC_GPIO_IRQ_START MXC_INTERNAL_IRQS -/* these are ordered by size to support multi-SoC kernels */ -#if defined CONFIG_SOC_IMX53 -#define MXC_GPIO_IRQS (32 * 7) -#elif defined CONFIG_ARCH_MX2 -#define MXC_GPIO_IRQS (32 * 6) -#elif defined CONFIG_SOC_IMX50 -#define MXC_GPIO_IRQS (32 * 6) -#elif defined CONFIG_ARCH_MX1 -#define MXC_GPIO_IRQS (32 * 4) -#elif defined CONFIG_ARCH_MX25 -#define MXC_GPIO_IRQS (32 * 4) -#elif defined CONFIG_SOC_IMX51 -#define MXC_GPIO_IRQS (32 * 4) -#elif defined CONFIG_ARCH_MX3 -#define MXC_GPIO_IRQS (32 * 3) -#endif - /* * The next 16 interrupts are for board specific purposes. Since * the kernel can only run on one machine at a time, we can re-use * these. If you need more, increase MXC_BOARD_IRQS, but keep it * within sensible limits. */ -#define MXC_BOARD_IRQ_START (MXC_INTERNAL_IRQS + MXC_GPIO_IRQS) +#define MXC_BOARD_IRQ_START (MXC_INTERNAL_IRQS + ARCH_NR_GPIOS) #ifdef CONFIG_MACH_MX31ADS_WM1133_EV1 #define MXC_BOARD_IRQS 80 diff --git a/arch/arm/plat-nomadik/include/plat/ste_dma40.h b/arch/arm/plat-nomadik/include/plat/ste_dma40.h index c44886062f8e..685c78716d95 100644 --- a/arch/arm/plat-nomadik/include/plat/ste_dma40.h +++ b/arch/arm/plat-nomadik/include/plat/ste_dma40.h @@ -10,6 +10,7 @@ #define STE_DMA40_H #include <linux/dmaengine.h> +#include <linux/scatterlist.h> #include <linux/workqueue.h> #include <linux/interrupt.h> diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h index ec97e00cb581..91e8de3db085 100644 --- a/arch/arm/plat-omap/include/plat/gpio.h +++ b/arch/arm/plat-omap/include/plat/gpio.h @@ -174,12 +174,32 @@ struct omap_gpio_dev_attr { bool dbck_flag; /* dbck required or not - True for OMAP3&4 */ }; +struct omap_gpio_reg_offs { + u16 revision; + u16 direction; + u16 datain; + u16 dataout; + u16 set_dataout; + u16 clr_dataout; + u16 irqstatus; + u16 irqstatus2; + u16 irqenable; + u16 set_irqenable; + u16 clr_irqenable; + u16 debounce; + u16 debounce_en; + + bool irqenable_inv; +}; + struct omap_gpio_platform_data { u16 virtual_irq_start; int bank_type; int bank_width; /* GPIO bank width */ int bank_stride; /* Only needed for omap1 MPUIO */ bool dbck_flag; /* dbck required or not - True for OMAP3&4 */ + + struct omap_gpio_reg_offs *regs; }; /* TODO: Analyze removing gpio_bank_count usage from driver code */ diff --git a/arch/arm/plat-pxa/include/plat/sdhci.h b/arch/arm/plat-pxa/include/plat/sdhci.h deleted file mode 100644 index 1ab332e37d7d..000000000000 --- a/arch/arm/plat-pxa/include/plat/sdhci.h +++ /dev/null @@ -1,35 +0,0 @@ -/* linux/arch/arm/plat-pxa/include/plat/sdhci.h - * - * Copyright 2010 Marvell - * Zhangfei Gao <zhangfei.gao@marvell.com> - * - * PXA Platform - SDHCI platform data definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __PLAT_PXA_SDHCI_H -#define __PLAT_PXA_SDHCI_H - -/* pxa specific flag */ -/* Require clock free running */ -#define PXA_FLAG_DISABLE_CLOCK_GATING (1<<0) - -/* Board design supports 8-bit data on SD/SDIO BUS */ -#define PXA_FLAG_SD_8_BIT_CAPABLE_SLOT (1<<2) - -/* - * struct pxa_sdhci_platdata() - Platform device data for PXA SDHCI - * @max_speed: the maximum speed supported - * @quirks: quirks of specific device - * @flags: flags for platform requirement - */ -struct sdhci_pxa_platdata { - unsigned int max_speed; - unsigned int quirks; - unsigned int flags; -}; - -#endif /* __PLAT_PXA_SDHCI_H */ diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index a79a8ccd25f6..539bd0e3defd 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -712,7 +712,7 @@ static struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel); * get control of an dma channel */ -int s3c2410_dma_request(unsigned int channel, +int s3c2410_dma_request(enum dma_ch channel, struct s3c2410_dma_client *client, void *dev) { @@ -783,7 +783,7 @@ EXPORT_SYMBOL(s3c2410_dma_request); * allowed to go through. */ -int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *client) +int s3c2410_dma_free(enum dma_ch channel, struct s3c2410_dma_client *client) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); unsigned long flags; @@ -974,7 +974,7 @@ static int s3c2410_dma_started(struct s3c2410_dma_chan *chan) } int -s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op) +s3c2410_dma_ctrl(enum dma_ch channel, enum s3c2410_chan_op op) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); @@ -1021,7 +1021,7 @@ EXPORT_SYMBOL(s3c2410_dma_ctrl); * xfersize: size of unit in bytes (1,2,4) */ -int s3c2410_dma_config(unsigned int channel, +int s3c2410_dma_config(enum dma_ch channel, int xferunit) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); @@ -1100,7 +1100,7 @@ EXPORT_SYMBOL(s3c2410_dma_config); * devaddr: physical address of the source */ -int s3c2410_dma_devconfig(unsigned int channel, +int s3c2410_dma_devconfig(enum dma_ch channel, enum s3c2410_dmasrc source, unsigned long devaddr) { @@ -1173,7 +1173,7 @@ EXPORT_SYMBOL(s3c2410_dma_devconfig); * returns the current transfer points for the dma source and destination */ -int s3c2410_dma_getposition(unsigned int channel, dma_addr_t *src, dma_addr_t *dst) +int s3c2410_dma_getposition(enum dma_ch channel, dma_addr_t *src, dma_addr_t *dst) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); diff --git a/arch/arm/plat-samsung/dma.c b/arch/arm/plat-samsung/dma.c index cb459dd95459..6143aa147688 100644 --- a/arch/arm/plat-samsung/dma.c +++ b/arch/arm/plat-samsung/dma.c @@ -41,7 +41,7 @@ struct s3c2410_dma_chan *s3c_dma_lookup_channel(unsigned int channel) * irq? */ -int s3c2410_dma_set_opfn(unsigned int channel, s3c2410_dma_opfn_t rtn) +int s3c2410_dma_set_opfn(enum dma_ch channel, s3c2410_dma_opfn_t rtn) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); @@ -56,7 +56,7 @@ int s3c2410_dma_set_opfn(unsigned int channel, s3c2410_dma_opfn_t rtn) } EXPORT_SYMBOL(s3c2410_dma_set_opfn); -int s3c2410_dma_set_buffdone_fn(unsigned int channel, s3c2410_dma_cbfn_t rtn) +int s3c2410_dma_set_buffdone_fn(enum dma_ch channel, s3c2410_dma_cbfn_t rtn) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); @@ -71,7 +71,7 @@ int s3c2410_dma_set_buffdone_fn(unsigned int channel, s3c2410_dma_cbfn_t rtn) } EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn); -int s3c2410_dma_setflags(unsigned int channel, unsigned int flags) +int s3c2410_dma_setflags(enum dma_ch channel, unsigned int flags) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); diff --git a/arch/arm/plat-samsung/include/plat/dma.h b/arch/arm/plat-samsung/include/plat/dma.h index 2e8f8c6560d7..8c273b7a6f56 100644 --- a/arch/arm/plat-samsung/include/plat/dma.h +++ b/arch/arm/plat-samsung/include/plat/dma.h @@ -42,6 +42,7 @@ struct s3c2410_dma_client { }; struct s3c2410_dma_chan; +enum dma_ch; /* s3c2410_dma_cbfn_t * @@ -62,7 +63,7 @@ typedef int (*s3c2410_dma_opfn_t)(struct s3c2410_dma_chan *, * request a dma channel exclusivley */ -extern int s3c2410_dma_request(unsigned int channel, +extern int s3c2410_dma_request(enum dma_ch channel, struct s3c2410_dma_client *, void *dev); @@ -71,14 +72,14 @@ extern int s3c2410_dma_request(unsigned int channel, * change the state of the dma channel */ -extern int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op); +extern int s3c2410_dma_ctrl(enum dma_ch channel, enum s3c2410_chan_op op); /* s3c2410_dma_setflags * * set the channel's flags to a given state */ -extern int s3c2410_dma_setflags(unsigned int channel, +extern int s3c2410_dma_setflags(enum dma_ch channel, unsigned int flags); /* s3c2410_dma_free @@ -86,7 +87,7 @@ extern int s3c2410_dma_setflags(unsigned int channel, * free the dma channel (will also abort any outstanding operations) */ -extern int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *); +extern int s3c2410_dma_free(enum dma_ch channel, struct s3c2410_dma_client *); /* s3c2410_dma_enqueue * @@ -95,7 +96,7 @@ extern int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *); * drained before the buffer is given to the DMA system. */ -extern int s3c2410_dma_enqueue(unsigned int channel, void *id, +extern int s3c2410_dma_enqueue(enum dma_ch channel, void *id, dma_addr_t data, int size); /* s3c2410_dma_config @@ -103,14 +104,14 @@ extern int s3c2410_dma_enqueue(unsigned int channel, void *id, * configure the dma channel */ -extern int s3c2410_dma_config(unsigned int channel, int xferunit); +extern int s3c2410_dma_config(enum dma_ch channel, int xferunit); /* s3c2410_dma_devconfig * * configure the device we're talking to */ -extern int s3c2410_dma_devconfig(unsigned int channel, +extern int s3c2410_dma_devconfig(enum dma_ch channel, enum s3c2410_dmasrc source, unsigned long devaddr); /* s3c2410_dma_getposition @@ -118,10 +119,10 @@ extern int s3c2410_dma_devconfig(unsigned int channel, * get the position that the dma transfer is currently at */ -extern int s3c2410_dma_getposition(unsigned int channel, +extern int s3c2410_dma_getposition(enum dma_ch channel, dma_addr_t *src, dma_addr_t *dest); -extern int s3c2410_dma_set_opfn(unsigned int, s3c2410_dma_opfn_t rtn); -extern int s3c2410_dma_set_buffdone_fn(unsigned int, s3c2410_dma_cbfn_t rtn); +extern int s3c2410_dma_set_opfn(enum dma_ch, s3c2410_dma_opfn_t rtn); +extern int s3c2410_dma_set_buffdone_fn(enum dma_ch, s3c2410_dma_cbfn_t rtn); diff --git a/arch/arm/plat-samsung/irq-uart.c b/arch/arm/plat-samsung/irq-uart.c index 0e46588d847b..657405c481d0 100644 --- a/arch/arm/plat-samsung/irq-uart.c +++ b/arch/arm/plat-samsung/irq-uart.c @@ -54,6 +54,13 @@ static void __init s3c_init_uart_irq(struct s3c_uart_irq *uirq) gc = irq_alloc_generic_chip("s3c-uart", 1, uirq->base_irq, reg_base, handle_level_irq); + + if (!gc) { + pr_err("%s: irq_alloc_generic_chip for IRQ %u failed\n", + __func__, uirq->base_irq); + return; + } + ct = gc->chip_types; ct->chip.irq_ack = irq_gc_ack_set_bit; ct->chip.irq_mask = irq_gc_mask_set_bit; diff --git a/arch/arm/plat-samsung/irq-vic-timer.c b/arch/arm/plat-samsung/irq-vic-timer.c index a607546ddbd0..f714d060370d 100644 --- a/arch/arm/plat-samsung/irq-vic-timer.c +++ b/arch/arm/plat-samsung/irq-vic-timer.c @@ -54,6 +54,13 @@ void __init s3c_init_vic_timer_irq(unsigned int num, unsigned int timer_irq) s3c_tgc = irq_alloc_generic_chip("s3c-timer", 1, timer_irq, S3C64XX_TINT_CSTAT, handle_level_irq); + + if (!s3c_tgc) { + pr_err("%s: irq_alloc_generic_chip for IRQ %d failed\n", + __func__, timer_irq); + return; + } + ct = s3c_tgc->chip_types; ct->chip.irq_mask = irq_gc_mask_clr_bit; ct->chip.irq_unmask = irq_gc_mask_set_bit; |