diff options
Diffstat (limited to 'arch/arm')
| -rw-r--r-- | arch/arm/mach-davinci/Kconfig | 11 | ||||
| -rw-r--r-- | arch/arm/mach-davinci/board-da850-evm.c | 113 |
2 files changed, 0 insertions, 124 deletions
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index cd30f6f5f2ff..dd8f5312b2c0 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -200,17 +200,6 @@ config DA850_UI_SD_VIDEO_PORT endchoice -config DA850_WL12XX - bool "AM18x wl1271 daughter board" - depends on MACH_DAVINCI_DA850_EVM - help - The wl1271 daughter card for AM18x EVMs is a combo wireless - connectivity add-on card, based on the LS Research TiWi module with - Texas Instruments' wl1271 solution. - Say Y if you want to use a wl1271 expansion card connected to the - AM18x EVM. - - config MACH_MITYOMAPL138 bool "Critical Link MityDSP-L138/MityARM-1808 SoM" depends on ARCH_DAVINCI_DA850 diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index 853b941b710e..1ed545cc2b83 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -38,7 +38,6 @@ #include <linux/regulator/fixed.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> -#include <linux/wl12xx.h> #include <mach/common.h> #include <mach/cp_intc.h> @@ -60,9 +59,6 @@ #define DA850_MMCSD_CD_PIN GPIO_TO_PIN(4, 0) #define DA850_MMCSD_WP_PIN GPIO_TO_PIN(4, 1) -#define DA850_WLAN_EN GPIO_TO_PIN(6, 9) -#define DA850_WLAN_IRQ GPIO_TO_PIN(6, 10) - #define DA850_MII_MDIO_CLKEN_PIN GPIO_TO_PIN(2, 6) static struct mtd_partition da850evm_spiflash_part[] = { @@ -1343,110 +1339,6 @@ static __init void da850_vpif_init(void) static __init void da850_vpif_init(void) {} #endif -#ifdef CONFIG_DA850_WL12XX - -static void wl12xx_set_power(int index, bool power_on) -{ - static bool power_state; - - pr_debug("Powering %s wl12xx", power_on ? "on" : "off"); - - if (power_on == power_state) - return; - power_state = power_on; - - if (power_on) { - /* Power up sequence required for wl127x devices */ - gpio_set_value(DA850_WLAN_EN, 1); - usleep_range(15000, 15000); - gpio_set_value(DA850_WLAN_EN, 0); - usleep_range(1000, 1000); - gpio_set_value(DA850_WLAN_EN, 1); - msleep(70); - } else { - gpio_set_value(DA850_WLAN_EN, 0); - } -} - -static struct davinci_mmc_config da850_wl12xx_mmc_config = { - .set_power = wl12xx_set_power, - .wires = 4, - .max_freq = 25000000, - .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_NONREMOVABLE | - MMC_CAP_POWER_OFF_CARD, -}; - -static const short da850_wl12xx_pins[] __initconst = { - DA850_MMCSD1_DAT_0, DA850_MMCSD1_DAT_1, DA850_MMCSD1_DAT_2, - DA850_MMCSD1_DAT_3, DA850_MMCSD1_CLK, DA850_MMCSD1_CMD, - DA850_GPIO6_9, DA850_GPIO6_10, - -1 -}; - -static struct wl12xx_platform_data da850_wl12xx_wlan_data __initdata = { - .irq = -1, - .irq_trigger = IRQ_TYPE_EDGE_RISING, - .ref_clock_freq = 38400000, - .ref_clock_xtal = false, -}; - -static __init int da850_wl12xx_init(void) -{ - int ret; - - ret = davinci_cfg_reg_list(da850_wl12xx_pins); - if (ret) { - pr_err("wl12xx/mmc mux setup failed: %d\n", ret); - goto exit; - } - - ret = da850_register_mmcsd1(&da850_wl12xx_mmc_config); - if (ret) { - pr_err("wl12xx/mmc registration failed: %d\n", ret); - goto exit; - } - - ret = gpio_request_one(DA850_WLAN_EN, GPIOF_OUT_INIT_LOW, "wl12xx_en"); - if (ret) { - pr_err("Could not request wl12xx enable gpio: %d\n", ret); - goto exit; - } - - ret = gpio_request_one(DA850_WLAN_IRQ, GPIOF_IN, "wl12xx_irq"); - if (ret) { - pr_err("Could not request wl12xx irq gpio: %d\n", ret); - goto free_wlan_en; - } - - da850_wl12xx_wlan_data.irq = gpio_to_irq(DA850_WLAN_IRQ); - - ret = wl12xx_set_platform_data(&da850_wl12xx_wlan_data); - if (ret) { - pr_err("Could not set wl12xx data: %d\n", ret); - goto free_wlan_irq; - } - - return 0; - -free_wlan_irq: - gpio_free(DA850_WLAN_IRQ); - -free_wlan_en: - gpio_free(DA850_WLAN_EN); - -exit: - return ret; -} - -#else /* CONFIG_DA850_WL12XX */ - -static __init int da850_wl12xx_init(void) -{ - return 0; -} - -#endif /* CONFIG_DA850_WL12XX */ - #define DA850EVM_SATA_REFCLKPN_RATE (100 * 1000 * 1000) static __init void da850_evm_init(void) @@ -1503,11 +1395,6 @@ static __init void da850_evm_init(void) if (ret) pr_warn("%s: MMCSD0 registration failed: %d\n", __func__, ret); - - ret = da850_wl12xx_init(); - if (ret) - pr_warn("%s: WL12xx initialization failed: %d\n", - __func__, ret); } davinci_serial_init(da8xx_serial_device); |