diff options
Diffstat (limited to 'arch/arm')
23 files changed, 110 insertions, 44 deletions
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 4bc4b575c99b..31a9e061ddd0 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -204,6 +204,8 @@ tps659038: tps659038@58 { compatible = "ti,tps659038"; reg = <0x58>; + ti,palmas-override-powerhold; + ti,system-power-controller; tps659038_pmic { compatible = "ti,tps659038-pmic"; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 57892f264cea..e7144662af45 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -2017,4 +2017,8 @@ coefficients = <0 2000>; }; +&cpu_crit { + temperature = <120000>; /* milli Celsius */ +}; + /include/ "dra7xx-clocks.dtsi" diff --git a/arch/arm/boot/dts/imx53-qsrb.dts b/arch/arm/boot/dts/imx53-qsrb.dts index de2215832372..4e103a905dc9 100644 --- a/arch/arm/boot/dts/imx53-qsrb.dts +++ b/arch/arm/boot/dts/imx53-qsrb.dts @@ -23,7 +23,7 @@ imx53-qsrb { pinctrl_pmic: pmicgrp { fsl,pins = < - MX53_PAD_CSI0_DAT5__GPIO5_23 0x1e4 /* IRQ */ + MX53_PAD_CSI0_DAT5__GPIO5_23 0x1c4 /* IRQ */ >; }; }; diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts index 5bb8fd57e7f5..d71da30c9cff 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dts +++ b/arch/arm/boot/dts/imx6sx-sdb.dts @@ -12,23 +12,6 @@ model = "Freescale i.MX6 SoloX SDB RevB Board"; }; -&cpu0 { - operating-points = < - /* kHz uV */ - 996000 1250000 - 792000 1175000 - 396000 1175000 - 198000 1175000 - >; - fsl,soc-operating-points = < - /* ARM kHz SOC uV */ - 996000 1250000 - 792000 1175000 - 396000 1175000 - 198000 1175000 - >; -}; - &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/include/arm b/arch/arm/boot/dts/include/arm deleted file mode 120000 index a96aa0ea9d8c..000000000000 --- a/arch/arm/boot/dts/include/arm +++ /dev/null @@ -1 +0,0 @@ -..
\ No newline at end of file diff --git a/arch/arm/boot/dts/include/arm64 b/arch/arm/boot/dts/include/arm64 deleted file mode 120000 index 074a835fca3e..000000000000 --- a/arch/arm/boot/dts/include/arm64 +++ /dev/null @@ -1 +0,0 @@ -../../../../arm64/boot/dts
\ No newline at end of file diff --git a/arch/arm/boot/dts/include/dt-bindings b/arch/arm/boot/dts/include/dt-bindings deleted file mode 120000 index 08c00e4972fa..000000000000 --- a/arch/arm/boot/dts/include/dt-bindings +++ /dev/null @@ -1 +0,0 @@ -../../../../../include/dt-bindings
\ No newline at end of file diff --git a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts index 08cce17a25a0..43e9364083de 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts +++ b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts @@ -249,9 +249,9 @@ OMAP3_CORE1_IOPAD(0x2110, PIN_INPUT | MUX_MODE0) /* cam_xclka.cam_xclka */ OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT | MUX_MODE0) /* cam_pclk.cam_pclk */ - OMAP3_CORE1_IOPAD(0x2114, PIN_INPUT | MUX_MODE0) /* cam_d0.cam_d0 */ - OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT | MUX_MODE0) /* cam_d1.cam_d1 */ - OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT | MUX_MODE0) /* cam_d2.cam_d2 */ + OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT | MUX_MODE0) /* cam_d0.cam_d0 */ + OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT | MUX_MODE0) /* cam_d1.cam_d1 */ + OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE0) /* cam_d2.cam_d2 */ OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE0) /* cam_d3.cam_d3 */ OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT | MUX_MODE0) /* cam_d4.cam_d4 */ OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT | MUX_MODE0) /* cam_d5.cam_d5 */ diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index 402579ab70d2..3a9e9b6aea68 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -72,6 +72,8 @@ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + clock-frequency = <13000000>; + arm,cpu-registers-not-fw-configured; }; watchdog: watchdog@10007000 { diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index b3a8b1f24499..9ec737069369 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -55,7 +55,8 @@ simple-audio-card,bitclock-master = <&telephony_link_master>; simple-audio-card,frame-master = <&telephony_link_master>; simple-audio-card,format = "i2s"; - + simple-audio-card,bitclock-inversion; + simple-audio-card,frame-inversion; simple-audio-card,cpu { sound-dai = <&mcbsp4>; }; diff --git a/arch/arm/boot/dts/omap4-panda-a4.dts b/arch/arm/boot/dts/omap4-panda-a4.dts index 78d363177762..f1a6476af371 100644 --- a/arch/arm/boot/dts/omap4-panda-a4.dts +++ b/arch/arm/boot/dts/omap4-panda-a4.dts @@ -13,7 +13,7 @@ /* Pandaboard Rev A4+ have external pullups on SCL & SDA */ &dss_hdmi_pins { pinctrl-single,pins = < - OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */ + OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) /* hdmi_cec.hdmi_cec */ OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0) /* hdmi_scl.hdmi_scl */ OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0) /* hdmi_sda.hdmi_sda */ >; diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts index 119f8e657edc..940fe4f7c5f6 100644 --- a/arch/arm/boot/dts/omap4-panda-es.dts +++ b/arch/arm/boot/dts/omap4-panda-es.dts @@ -34,7 +34,7 @@ /* PandaboardES has external pullups on SCL & SDA */ &dss_hdmi_pins { pinctrl-single,pins = < - OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */ + OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) /* hdmi_cec.hdmi_cec */ OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0) /* hdmi_scl.hdmi_scl */ OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0) /* hdmi_sda.hdmi_sda */ >; diff --git a/arch/arm/configs/gemini_defconfig b/arch/arm/configs/gemini_defconfig new file mode 100644 index 000000000000..d2d75fa664a6 --- /dev/null +++ b/arch/arm/configs/gemini_defconfig @@ -0,0 +1,68 @@ +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SYSVIPC=y +CONFIG_NO_HZ_IDLE=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_USER_NS=y +CONFIG_RELAY=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_ARCH_MULTI_V4=y +# CONFIG_ARCH_MULTI_V7 is not set +CONFIG_ARCH_GEMINI=y +CONFIG_PCI=y +CONFIG_PREEMPT=y +CONFIG_AEABI=y +CONFIG_CMDLINE="console=ttyS0,115200n8" +CONFIG_KEXEC=y +CONFIG_BINFMT_MISC=y +CONFIG_PM=y +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_MTD=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_CFI=y +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_STAA=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_OF=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_SCSI_PROC_FS is not set +CONFIG_BLK_DEV_SD=y +# CONFIG_SCSI_LOWLEVEL is not set +CONFIG_ATA=y +CONFIG_INPUT_EVDEV=y +CONFIG_KEYBOARD_GPIO=y +# CONFIG_INPUT_MOUSE is not set +# CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=1 +CONFIG_SERIAL_8250_RUNTIME_UARTS=1 +CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_HW_RANDOM is not set +# CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_GEMINI_WATCHDOG=y +CONFIG_USB=y +CONFIG_USB_MON=y +CONFIG_USB_FOTG210_HCD=y +CONFIG_USB_STORAGE=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_GEMINI=y +CONFIG_DMADEVICES=y +# CONFIG_DNOTIFY is not set +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_ROMFS_FS=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ISO8859_1=y +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_DEBUG_FS=y diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 2cd27c830ab6..283e79ab587d 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -335,7 +335,7 @@ static const struct ramc_info ramc_infos[] __initconst = { { .idle = sama5d3_ddr_standby, .memctrl = AT91_MEMCTRL_DDRSDR}, }; -static const struct of_device_id const ramc_ids[] __initconst = { +static const struct of_device_id ramc_ids[] __initconst = { { .compatible = "atmel,at91rm9200-sdramc", .data = &ramc_infos[0] }, { .compatible = "atmel,at91sam9260-sdramc", .data = &ramc_infos[1] }, { .compatible = "atmel,at91sam9g45-ddramc", .data = &ramc_infos[2] }, diff --git a/arch/arm/mach-bcm/bcm_kona_smc.c b/arch/arm/mach-bcm/bcm_kona_smc.c index cf3f8658f0e5..a55a7ecf146a 100644 --- a/arch/arm/mach-bcm/bcm_kona_smc.c +++ b/arch/arm/mach-bcm/bcm_kona_smc.c @@ -33,7 +33,7 @@ struct bcm_kona_smc_data { unsigned result; }; -static const struct of_device_id const bcm_kona_smc_ids[] __initconst = { +static const struct of_device_id bcm_kona_smc_ids[] __initconst = { {.compatible = "brcm,kona-smc"}, {.compatible = "bcm,kona-smc"}, /* deprecated name */ {}, diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c index 03da3813f1ab..7d5a44a06648 100644 --- a/arch/arm/mach-cns3xxx/core.c +++ b/arch/arm/mach-cns3xxx/core.c @@ -346,7 +346,7 @@ static struct usb_ohci_pdata cns3xxx_usb_ohci_pdata = { .power_off = csn3xxx_usb_power_off, }; -static const struct of_dev_auxdata const cns3xxx_auxdata[] __initconst = { +static const struct of_dev_auxdata cns3xxx_auxdata[] __initconst = { { "intel,usb-ehci", CNS3XXX_USB_BASE, "ehci-platform", &cns3xxx_usb_ehci_pdata }, { "intel,usb-ohci", CNS3XXX_USB_OHCI_BASE, "ohci-platform", &cns3xxx_usb_ohci_pdata }, { "cavium,cns3420-ahci", CNS3XXX_SATA2_BASE, "ahci", NULL }, diff --git a/arch/arm/mach-davinci/pm.c b/arch/arm/mach-davinci/pm.c index efb80354f303..b5cc05dc2cb2 100644 --- a/arch/arm/mach-davinci/pm.c +++ b/arch/arm/mach-davinci/pm.c @@ -153,7 +153,8 @@ int __init davinci_pm_init(void) davinci_sram_suspend = sram_alloc(davinci_cpu_suspend_sz, NULL); if (!davinci_sram_suspend) { pr_err("PM: cannot allocate SRAM memory\n"); - return -ENOMEM; + ret = -ENOMEM; + goto no_sram_mem; } davinci_sram_push(davinci_sram_suspend, davinci_cpu_suspend, @@ -161,6 +162,10 @@ int __init davinci_pm_init(void) suspend_set_ops(&davinci_pm_ops); + return 0; + +no_sram_mem: + iounmap(pm_config.ddrpsc_reg_base); no_ddrpsc_mem: iounmap(pm_config.ddrpll_reg_base); no_ddrpll_mem: diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index 3089d3bfa19b..8cc6338fcb12 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -266,11 +266,12 @@ extern int omap4_cpu_kill(unsigned int cpu); extern const struct smp_operations omap4_smp_ops; #endif +extern u32 omap4_get_cpu1_ns_pa_addr(void); + #if defined(CONFIG_SMP) && defined(CONFIG_PM) extern int omap4_mpuss_init(void); extern int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state); extern int omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state); -extern u32 omap4_get_cpu1_ns_pa_addr(void); #else static inline int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state) diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c index 03ec6d307c82..4cfc4f9b2c69 100644 --- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c +++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c @@ -213,11 +213,6 @@ static void __init save_l2x0_context(void) {} #endif -u32 omap4_get_cpu1_ns_pa_addr(void) -{ - return old_cpu1_ns_pa_addr; -} - /** * omap4_enter_lowpower: OMAP4 MPUSS Low Power Entry Function * The purpose of this function is to manage low power programming @@ -457,6 +452,11 @@ int __init omap4_mpuss_init(void) #endif +u32 omap4_get_cpu1_ns_pa_addr(void) +{ + return old_cpu1_ns_pa_addr; +} + /* * For kexec, we must set CPU1_WAKEUP_NS_PA_ADDR to point to * current kernel's secondary_startup() early before diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index 3faf454ba487..33e4953c61a8 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -306,7 +306,6 @@ static void __init omap4_smp_maybe_reset_cpu1(struct omap_smp_config *c) cpu1_startup_pa = readl_relaxed(cfg.wakeupgen_base + OMAP_AUX_CORE_BOOT_1); - cpu1_ns_pa_addr = omap4_get_cpu1_ns_pa_addr(); /* Did the configured secondary_startup() get overwritten? */ if (!omap4_smp_cpu1_startup_valid(cpu1_startup_pa)) @@ -316,9 +315,13 @@ static void __init omap4_smp_maybe_reset_cpu1(struct omap_smp_config *c) * If omap4 or 5 has NS_PA_ADDR configured, CPU1 may be in a * deeper idle state in WFI and will wake to an invalid address. */ - if ((soc_is_omap44xx() || soc_is_omap54xx()) && - !omap4_smp_cpu1_startup_valid(cpu1_ns_pa_addr)) - needs_reset = true; + if ((soc_is_omap44xx() || soc_is_omap54xx())) { + cpu1_ns_pa_addr = omap4_get_cpu1_ns_pa_addr(); + if (!omap4_smp_cpu1_startup_valid(cpu1_ns_pa_addr)) + needs_reset = true; + } else { + cpu1_ns_pa_addr = 0; + } if (!needs_reset || !c->cpu1_rstctrl_va) return; diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c index 2b138b65129a..dc11841ca334 100644 --- a/arch/arm/mach-omap2/prm_common.c +++ b/arch/arm/mach-omap2/prm_common.c @@ -711,7 +711,7 @@ static struct omap_prcm_init_data scrm_data __initdata = { }; #endif -static const struct of_device_id const omap_prcm_dt_match_table[] __initconst = { +static const struct of_device_id omap_prcm_dt_match_table[] __initconst = { #ifdef CONFIG_SOC_AM33XX { .compatible = "ti,am3-prcm", .data = &am3_prm_data }, #endif diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c index 2028167fff31..d76b1e5eb8ba 100644 --- a/arch/arm/mach-omap2/vc.c +++ b/arch/arm/mach-omap2/vc.c @@ -559,7 +559,7 @@ struct i2c_init_data { u8 hsscll_12; }; -static const struct i2c_init_data const omap4_i2c_timing_data[] __initconst = { +static const struct i2c_init_data omap4_i2c_timing_data[] __initconst = { { .load = 50, .loadbits = 0x3, diff --git a/arch/arm/mach-spear/time.c b/arch/arm/mach-spear/time.c index 4878ba90026d..289e036c9c30 100644 --- a/arch/arm/mach-spear/time.c +++ b/arch/arm/mach-spear/time.c @@ -204,7 +204,7 @@ static void __init spear_clockevent_init(int irq) setup_irq(irq, &spear_timer_irq); } -static const struct of_device_id const timer_of_match[] __initconst = { +static const struct of_device_id timer_of_match[] __initconst = { { .compatible = "st,spear-timer", }, { }, }; |