1207 files changed, 44080 insertions, 50579 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 93180845ae16..b649c5904a4f 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1,9 +1,13 @@
 config ARM
 	bool
 	default y
+	select ARCH_HAVE_CUSTOM_GPIO_H
 	select HAVE_AOUT
 	select HAVE_DMA_API_DEBUG
 	select HAVE_IDE if PCI || ISA || PCMCIA
+	select HAVE_DMA_ATTRS
+	select HAVE_DMA_CONTIGUOUS if (CPU_V6 || CPU_V6K || CPU_V7)
+	select CMA if (CPU_V6 || CPU_V6K || CPU_V7)
 	select HAVE_MEMBLOCK
 	select RTC_LIB
 	select SYS_SUPPORTS_APM_EMULATION
@@ -11,6 +15,7 @@ config ARM
 	select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
 	select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL
 	select HAVE_ARCH_KGDB
+	select HAVE_ARCH_TRACEHOOK
 	select HAVE_KPROBES if !XIP_KERNEL
 	select HAVE_KRETPROBES if (HAVE_KPROBES)
 	select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
@@ -30,10 +35,17 @@ config ARM
 	select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7))
 	select HAVE_C_RECORDMCOUNT
 	select HAVE_GENERIC_HARDIRQS
+	select HARDIRQS_SW_RESEND
+	select GENERIC_IRQ_PROBE
 	select GENERIC_IRQ_SHOW
+	select GENERIC_IRQ_PROBE
+	select HARDIRQS_SW_RESEND
 	select CPU_PM if (SUSPEND || CPU_IDLE)
 	select GENERIC_PCI_IOMAP
-	select HAVE_BPF_JIT if NET
+	select HAVE_BPF_JIT
+	select GENERIC_SMP_IDLE_THREAD
+	select KTIME_SCALAR
+	select GENERIC_CLOCKEVENTS_BROADCAST if SMP
 	help
 	  The ARM series is a line of low-power-consumption RISC chip designs
 	  licensed by ARM Ltd and targeted at embedded applications and
@@ -45,33 +57,25 @@ config ARM
 config ARM_HAS_SG_CHAIN
 	bool
 
-config HAVE_PWM
-	bool
-
-config MIGHT_HAVE_PCI
-	bool
-
-config SYS_SUPPORTS_APM_EMULATION
+config NEED_SG_DMA_LENGTH
 	bool
 
-config GENERIC_GPIO
+config ARM_DMA_USE_IOMMU
+	select NEED_SG_DMA_LENGTH
+	select ARM_HAS_SG_CHAIN
 	bool
 
-config ARCH_USES_GETTIMEOFFSET
+config HAVE_PWM
 	bool
-	default n
 
-config GENERIC_CLOCKEVENTS
+config MIGHT_HAVE_PCI
 	bool
 
-config GENERIC_CLOCKEVENTS_BROADCAST
+config SYS_SUPPORTS_APM_EMULATION
 	bool
-	depends on GENERIC_CLOCKEVENTS
-	default y if SMP
 
-config KTIME_SCALAR
+config GENERIC_GPIO
 	bool
-	default y
 
 config HAVE_TCM
 	bool
@@ -101,14 +105,6 @@ config EISA
 config SBUS
 	bool
 
-config MCA
-	bool
-	help
-	  MicroChannel Architecture is found in some IBM PS/2 machines and
-	  laptops.  It is a bus system similar to PCI or ISA. See
-	  <file:Documentation/mca.txt> (and especially the web page given
-	  there) before attempting to build an MCA bus kernel.
-
 config STACKTRACE_SUPPORT
 	bool
 	default y
@@ -126,14 +122,6 @@ config TRACE_IRQFLAGS_SUPPORT
 	bool
 	default y
 
-config HARDIRQS_SW_RESEND
-	bool
-	default y
-
-config GENERIC_IRQ_PROBE
-	bool
-	default y
-
 config GENERIC_LOCKBREAK
 	bool
 	default y
@@ -159,9 +147,6 @@ config ARCH_HAS_CPUFREQ
 	  and that the relevant menu configurations are displayed for
 	  it.
 
-config ARCH_HAS_CPU_IDLE_WAIT
-       def_bool y
-
 config GENERIC_HWEIGHT
 	bool
 	default y
@@ -280,6 +265,7 @@ config ARCH_INTEGRATOR
 	select NEED_MACH_IO_H
 	select NEED_MACH_MEMORY_H
 	select SPARSE_IRQ
+	select MULTI_IRQ_HANDLER
 	help
 	  Support for ARM's Integrator platform.
 
@@ -338,9 +324,10 @@ config ARCH_AT91
 	select HAVE_CLK
 	select CLKDEV_LOOKUP
 	select IRQ_DOMAIN
+	select NEED_MACH_IO_H if PCCARD
 	help
-	  This enables support for systems based on the Atmel AT91RM9200,
-	  AT91SAM9 processors.
+	  This enables support for systems based on Atmel
+	  AT91RM9200 and AT91SAM9* processors.
 
 config ARCH_BCMRING
 	bool "Broadcom BCMRING"
@@ -372,12 +359,12 @@ config ARCH_HIGHBANK
 	  Support for the Calxeda Highbank SoC based boards.
 
 config ARCH_CLPS711X
-	bool "Cirrus Logic CLPS711x/EP721x-based"
+	bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
 	select CPU_ARM720T
 	select ARCH_USES_GETTIMEOFFSET
 	select NEED_MACH_MEMORY_H
 	help
-	  Support for Cirrus Logic 711x/721x based boards.
+	  Support for Cirrus Logic 711x/721x/731x based boards.
 
 config ARCH_CNS3XXX
 	bool "Cavium Networks CNS3XXX family"
@@ -406,6 +393,8 @@ config ARCH_PRIMA2
 	select CLKDEV_LOOKUP
 	select GENERIC_IRQ_CHIP
 	select MIGHT_HAVE_CACHE_L2X0
+	select PINCTRL
+	select PINCTRL_SIRF
 	select USE_OF
 	select ZONE_DMA
 	help
@@ -467,7 +456,10 @@ config ARCH_MXS
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
+	select COMMON_CLK
 	select HAVE_CLK_PREPARE
+	select PINCTRL
+	select USE_OF
 	help
 	  Support for Freescale MXS-based family of processors
 
@@ -527,35 +519,13 @@ config ARCH_IOP33X
 	help
 	  Support for Intel's IOP33X (XScale) family of processors.
 
-config ARCH_IXP23XX
- 	bool "IXP23XX-based"
-	depends on MMU
-	select CPU_XSC3
- 	select PCI
-	select ARCH_USES_GETTIMEOFFSET
-	select NEED_MACH_IO_H
-	select NEED_MACH_MEMORY_H
-	help
-	  Support for Intel's IXP23xx (XScale) family of processors.
-
-config ARCH_IXP2000
-	bool "IXP2400/2800-based"
-	depends on MMU
-	select CPU_XSCALE
-	select PCI
-	select ARCH_USES_GETTIMEOFFSET
-	select NEED_MACH_IO_H
-	select NEED_MACH_MEMORY_H
-	help
-	  Support for Intel's IXP2400/2800 (XScale) family of processors.
-
 config ARCH_IXP4XX
 	bool "IXP4xx-based"
 	depends on MMU
 	select ARCH_HAS_DMA_SET_COHERENT_MASK
 	select CLKSRC_MMIO
 	select CPU_XSCALE
-	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_CLOCKEVENTS
 	select MIGHT_HAVE_PCI
 	select NEED_MACH_IO_H
@@ -596,6 +566,7 @@ config ARCH_LPC32XX
 	select USB_ARCH_HAS_OHCI
 	select CLKDEV_LOOKUP
 	select GENERIC_CLOCKEVENTS
+	select USE_OF
 	help
 	  Support for the NXP LPC32XX family of processors
 
@@ -631,7 +602,7 @@ config ARCH_MMP
 	select CLKDEV_LOOKUP
 	select GENERIC_CLOCKEVENTS
 	select GPIO_PXA
-	select TICK_ONESHOT
+	select IRQ_DOMAIN
 	select PLAT_PXA
 	select SPARSE_IRQ
 	select GENERIC_ALLOCATOR
@@ -715,7 +686,6 @@ config ARCH_PXA
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_CLOCKEVENTS
 	select GPIO_PXA
-	select TICK_ONESHOT
 	select PLAT_PXA
 	select SPARSE_IRQ
 	select AUTO_ZRELADDR
@@ -782,7 +752,6 @@ config ARCH_SA1100
 	select CPU_FREQ
 	select GENERIC_CLOCKEVENTS
 	select CLKDEV_LOOKUP
-	select TICK_ONESHOT
 	select ARCH_REQUIRE_GPIOLIB
 	select HAVE_IDE
 	select NEED_MACH_MEMORY_H
@@ -945,6 +914,7 @@ config ARCH_NOMADIK
 	select CPU_ARM926T
 	select CLKDEV_LOOKUP
 	select GENERIC_CLOCKEVENTS
+	select PINCTRL
 	select MIGHT_HAVE_CACHE_L2X0
 	select ARCH_REQUIRE_GPIOLIB
 	help
@@ -979,6 +949,7 @@ config PLAT_SPEAR
 	select ARM_AMBA
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
+	select COMMON_CLK
 	select CLKSRC_MMIO
 	select GENERIC_CLOCKEVENTS
 	select HAVE_CLK
@@ -1045,10 +1016,6 @@ source "arch/arm/mach-iop13xx/Kconfig"
 
 source "arch/arm/mach-ixp4xx/Kconfig"
 
-source "arch/arm/mach-ixp2000/Kconfig"
-
-source "arch/arm/mach-ixp23xx/Kconfig"
-
 source "arch/arm/mach-kirkwood/Kconfig"
 
 source "arch/arm/mach-ks8695/Kconfig"
@@ -1087,7 +1054,6 @@ source "arch/arm/mach-sa1100/Kconfig"
 
 source "arch/arm/plat-samsung/Kconfig"
 source "arch/arm/plat-s3c24xx/Kconfig"
-source "arch/arm/plat-s5p/Kconfig"
 
 source "arch/arm/plat-spear/Kconfig"
 
@@ -1138,6 +1104,7 @@ config PLAT_ORION
 	bool
 	select CLKSRC_MMIO
 	select GENERIC_IRQ_CHIP
+	select COMMON_CLK
 
 config PLAT_PXA
 	bool
@@ -1185,6 +1152,15 @@ if !MMU
 source "arch/arm/Kconfig-nommu"
 endif
 
+config ARM_ERRATA_326103
+	bool "ARM errata: FSR write bit incorrect on a SWP to read-only memory"
+	depends on CPU_V6
+	help
+	  Executing a SWP instruction to read-only memory does not set bit 11
+	  of the FSR on the ARM 1136 prior to r1p0. This causes the kernel to
+	  treat the access as a read, preventing a COW from occurring and
+	  causing the faulting task to livelock.
+
 config ARM_ERRATA_411920
 	bool "ARM errata: Invalidation of the Instruction Cache operation can fail"
 	depends on CPU_V6 || CPU_V6K
@@ -1463,8 +1439,6 @@ endmenu
 
 menu "Kernel Features"
 
-source "kernel/time/Kconfig"
-
 config HAVE_SMP
 	bool
 	help
@@ -1542,10 +1516,15 @@ config HAVE_ARM_SCU
 	help
 	  This option enables support for the ARM system coherency unit
 
+config ARM_ARCH_TIMER
+	bool "Architected timer support"
+	depends on CPU_V7
+	help
+	  This option enables support for the ARM architected timer
+
 config HAVE_ARM_TWD
 	bool
 	depends on SMP
-	select TICK_ONESHOT
 	help
 	  This options enables support for the ARM timer and watchdog unit
 
@@ -1926,10 +1905,10 @@ choice
 	default ZBOOT_ROM_NONE
 	help
 	  Include experimental SD/MMC loading code in the ROM-able zImage.
-	  With this enabled it is possible to write the the ROM-able zImage
+	  With this enabled it is possible to write the ROM-able zImage
 	  kernel image to an MMC or SD card and boot the kernel straight
 	  from the reset vector. At reset the processor Mask ROM will load
-	  the first part of the the ROM-able zImage which in turn loads the
+	  the first part of the ROM-able zImage which in turn loads the
 	  rest the kernel image to RAM.
 
 config ZBOOT_ROM_NONE
@@ -2271,9 +2250,9 @@ menu "Power management options"
 source "kernel/power/Kconfig"
 
 config ARCH_SUSPEND_POSSIBLE
-	depends on !ARCH_S5PC100
+	depends on !ARCH_S5PC100 && !ARCH_TEGRA
 	depends on CPU_ARM920T || CPU_ARM926T || CPU_SA1100 || \
-		CPU_V6 || CPU_V6K || CPU_V7 || CPU_XSC3 || CPU_XSCALE
+		CPU_V6 || CPU_V6K || CPU_V7 || CPU_XSC3 || CPU_XSCALE || CPU_MOHAWK
 	def_bool y
 
 config ARM_CPU_SUSPEND
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 85348a09d655..01a134141216 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -103,6 +103,35 @@ choice
 		  Say Y here if you want the debug print routines to direct
 		  their output to the second serial port on these devices.
 
+	config DEBUG_DAVINCI_DA8XX_UART1
+		bool "Kernel low-level debugging on DaVinci DA8XX using UART1"
+		depends on ARCH_DAVINCI_DA8XX
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to UART1 serial port on DaVinci DA8XX devices.
+
+	config DEBUG_DAVINCI_DA8XX_UART2
+		bool "Kernel low-level debugging on DaVinci DA8XX using UART2"
+		depends on ARCH_DAVINCI_DA8XX
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to UART2 serial port on DaVinci DA8XX devices.
+
+	config DEBUG_DAVINCI_DMx_UART0
+		bool "Kernel low-level debugging on DaVinci DMx using UART0"
+		depends on ARCH_DAVINCI_DMx
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to UART0 serial port on DaVinci DMx devices.
+
+	config DEBUG_DAVINCI_TNETV107X_UART1
+		bool "Kernel low-level debugging on DaVinci TNETV107x using UART1"
+		depends on ARCH_DAVINCI_TNETV107X
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to UART1 serial port on DaVinci TNETV107X
+		  devices.
+
 	config DEBUG_DC21285_PORT
 		bool "Kernel low-level debugging messages via footbridge serial port"
 		depends on FOOTBRIDGE
@@ -180,6 +209,14 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on i.MX50 or i.MX53.
 
+	config DEBUG_IMX6Q_UART2
+		bool "i.MX6Q Debug UART2"
+		depends on SOC_IMX6Q
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on i.MX6Q UART2. This is correct for e.g. the SabreLite
+                  board.
+
 	config DEBUG_IMX6Q_UART4
 		bool "i.MX6Q Debug UART4"
 		depends on SOC_IMX6Q
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 047a20780fc1..0298b00fe241 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -70,8 +70,6 @@ arch-$(CONFIG_CPU_32v4)		:=-D__LINUX_ARM_ARCH__=4 -march=armv4
 arch-$(CONFIG_CPU_32v3)		:=-D__LINUX_ARM_ARCH__=3 -march=armv3
 
 # This selects how we optimise for the processor.
-tune-$(CONFIG_CPU_ARM610)	:=-mtune=arm610
-tune-$(CONFIG_CPU_ARM710)	:=-mtune=arm710
 tune-$(CONFIG_CPU_ARM7TDMI)	:=-mtune=arm7tdmi
 tune-$(CONFIG_CPU_ARM720T)	:=-mtune=arm7tdmi
 tune-$(CONFIG_CPU_ARM740T)	:=-mtune=arm7tdmi
@@ -119,7 +117,7 @@ KBUILD_AFLAGS	+=$(CFLAGS_ABI) $(AFLAGS_THUMB2) $(arch-y) $(tune-y) -include asm/
 CHECKFLAGS	+= -D__arm__
 
 #Default value
-head-y		:= arch/arm/kernel/head$(MMUEXT).o arch/arm/kernel/init_task.o
+head-y		:= arch/arm/kernel/head$(MMUEXT).o
 textofs-y	:= 0x00008000
 textofs-$(CONFIG_ARCH_CLPS711X) := 0x00028000
 # We don't want the htc bootloader to corrupt kernel during resume
@@ -149,8 +147,6 @@ machine-$(CONFIG_ARCH_INTEGRATOR)	:= integrator
 machine-$(CONFIG_ARCH_IOP13XX)		:= iop13xx
 machine-$(CONFIG_ARCH_IOP32X)		:= iop32x
 machine-$(CONFIG_ARCH_IOP33X)		:= iop33x
-machine-$(CONFIG_ARCH_IXP2000)		:= ixp2000
-machine-$(CONFIG_ARCH_IXP23XX)		:= ixp23xx
 machine-$(CONFIG_ARCH_IXP4XX)		:= ixp4xx
 machine-$(CONFIG_ARCH_KIRKWOOD)		:= kirkwood
 machine-$(CONFIG_ARCH_KS8695)		:= ks8695
@@ -164,9 +160,7 @@ machine-$(CONFIG_ARCH_MXS)		:= mxs
 machine-$(CONFIG_ARCH_NETX)		:= netx
 machine-$(CONFIG_ARCH_NOMADIK)		:= nomadik
 machine-$(CONFIG_ARCH_OMAP1)		:= omap1
-machine-$(CONFIG_ARCH_OMAP2)		:= omap2
-machine-$(CONFIG_ARCH_OMAP3)		:= omap2
-machine-$(CONFIG_ARCH_OMAP4)		:= omap2
+machine-$(CONFIG_ARCH_OMAP2PLUS)	:= omap2
 machine-$(CONFIG_ARCH_ORION5X)		:= orion5x
 machine-$(CONFIG_ARCH_PICOXCELL)	:= picoxcell
 machine-$(CONFIG_ARCH_PNX4008)		:= pnx4008
@@ -192,6 +186,8 @@ machine-$(CONFIG_ARCH_VEXPRESS)		:= vexpress
 machine-$(CONFIG_ARCH_VT8500)		:= vt8500
 machine-$(CONFIG_ARCH_W90X900)		:= w90x900
 machine-$(CONFIG_FOOTBRIDGE)		:= footbridge
+machine-$(CONFIG_MACH_SPEAR1310)	:= spear13xx
+machine-$(CONFIG_MACH_SPEAR1340)	:= spear13xx
 machine-$(CONFIG_MACH_SPEAR300)		:= spear3xx
 machine-$(CONFIG_MACH_SPEAR310)		:= spear3xx
 machine-$(CONFIG_MACH_SPEAR320)		:= spear3xx
@@ -209,7 +205,7 @@ plat-$(CONFIG_PLAT_NOMADIK)	:= nomadik
 plat-$(CONFIG_PLAT_ORION)	:= orion
 plat-$(CONFIG_PLAT_PXA)		:= pxa
 plat-$(CONFIG_PLAT_S3C24XX)	:= s3c24xx samsung
-plat-$(CONFIG_PLAT_S5P)		:= s5p samsung
+plat-$(CONFIG_PLAT_S5P)		:= samsung
 plat-$(CONFIG_PLAT_SPEAR)	:= spear
 plat-$(CONFIG_PLAT_VERSATILE)	:= versatile
 
diff --git a/arch/arm/boot/compressed/atags_to_fdt.c b/arch/arm/boot/compressed/atags_to_fdt.c
index 6ce11c481178..797f04bedb47 100644
--- a/arch/arm/boot/compressed/atags_to_fdt.c
+++ b/arch/arm/boot/compressed/atags_to_fdt.c
@@ -77,6 +77,8 @@ int atags_to_fdt(void *atag_list, void *fdt, int total_space)
 		} else if (atag->hdr.tag == ATAG_MEM) {
 			if (memcount >= sizeof(mem_reg_property)/4)
 				continue;
+			if (!atag->u.mem.size)
+				continue;
 			mem_reg_property[memcount++] = cpu_to_fdt32(atag->u.mem.start);
 			mem_reg_property[memcount++] = cpu_to_fdt32(atag->u.mem.size);
 		} else if (atag->hdr.tag == ATAG_INITRD2) {
diff --git a/arch/arm/boot/compressed/head-xscale.S b/arch/arm/boot/compressed/head-xscale.S
index aa5ee49c5c5a..6ab0599c02dd 100644
--- a/arch/arm/boot/compressed/head-xscale.S
+++ b/arch/arm/boot/compressed/head-xscale.S
@@ -32,10 +32,3 @@ __XScale_start:
 		bic	r0, r0, #0x1000		@ clear Icache
 		mcr	p15, 0, r0, c1, c0, 0
 
-#ifdef CONFIG_ARCH_IXP2000
-		mov	r1, #-1
-		mov	r0, #0xd6000000
-		str	r1, [r0, #0x14]
-		str	r1, [r0, #0x18]
-#endif
-
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 5f6045f1766c..b8c64b80bafc 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -273,7 +273,7 @@ restart:	adr	r0, LC0
 		add	r0, r0, #0x100
 		mov	r1, r6
 		sub	r2, sp, r6
-		blne	atags_to_fdt
+		bleq	atags_to_fdt
 
 		ldmfd	sp!, {r0-r3, ip, lr}
 		sub	sp, sp, #0x10000
@@ -567,6 +567,12 @@ __armv3_mpu_cache_on:
 		mcr	p15, 0, r0, c7, c0, 0	@ invalidate whole cache v3
 		mov	pc, lr
 
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+#define CB_BITS 0x08
+#else
+#define CB_BITS 0x0c
+#endif
+
 __setup_mmu:	sub	r3, r4, #16384		@ Page directory size
 		bic	r3, r3, #0xff		@ Align the pointer
 		bic	r3, r3, #0x3f00
@@ -578,17 +584,14 @@ __setup_mmu:	sub	r3, r4, #16384		@ Page directory size
 		mov	r9, r0, lsr #18
 		mov	r9, r9, lsl #18		@ start of RAM
 		add	r10, r9, #0x10000000	@ a reasonable RAM size
-		mov	r1, #0x12
-		orr	r1, r1, #3 << 10
+		mov	r1, #0x12		@ XN|U + section mapping
+		orr	r1, r1, #3 << 10	@ AP=11
 		add	r2, r3, #16384
 1:		cmp	r1, r9			@ if virt > start of RAM
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-		orrhs	r1, r1, #0x08		@ set cacheable
-#else
-		orrhs	r1, r1, #0x0c		@ set cacheable, bufferable
-#endif
-		cmp	r1, r10			@ if virt > end of RAM
-		bichs	r1, r1, #0x0c		@ clear cacheable, bufferable
+		cmphs	r10, r1			@   && end of RAM > virt
+		bic	r1, r1, #0x1c		@ clear XN|U + C + B
+		orrlo	r1, r1, #0x10		@ Set XN|U for non-RAM
+		orrhs	r1, r1, r6		@ set RAM section settings
 		str	r1, [r0], #4		@ 1:1 mapping
 		add	r1, r1, #1048576
 		teq	r0, r2
@@ -599,7 +602,7 @@ __setup_mmu:	sub	r3, r4, #16384		@ Page directory size
  * so there is no map overlap problem for up to 1 MB compressed kernel.
  * If the execution is in RAM then we would only be duplicating the above.
  */
-		mov	r1, #0x1e
+		orr	r1, r6, #0x04		@ ensure B is set for this
 		orr	r1, r1, #3 << 10
 		mov	r2, pc
 		mov	r2, r2, lsr #20
@@ -620,6 +623,7 @@ __arm926ejs_mmu_cache_on:
 __armv4_mmu_cache_on:
 		mov	r12, lr
 #ifdef CONFIG_MMU
+		mov	r6, #CB_BITS | 0x12	@ U
 		bl	__setup_mmu
 		mov	r0, #0
 		mcr	p15, 0, r0, c7, c10, 4	@ drain write buffer
@@ -641,6 +645,7 @@ __armv7_mmu_cache_on:
 #ifdef CONFIG_MMU
 		mrc	p15, 0, r11, c0, c1, 4	@ read ID_MMFR0
 		tst	r11, #0xf		@ VMSA
+		movne	r6, #CB_BITS | 0x02	@ !XN
 		blne	__setup_mmu
 		mov	r0, #0
 		mcr	p15, 0, r0, c7, c10, 4	@ drain write buffer
@@ -655,7 +660,7 @@ __armv7_mmu_cache_on:
 		orr	r0, r0, #1 << 25	@ big-endian page tables
 #endif
 		orrne	r0, r0, #1		@ MMU enabled
-		movne	r1, #-1
+		movne	r1, #0xfffffffd		@ domain 0 = client
 		mcrne	p15, 0, r3, c2, c0, 0	@ load page table pointer
 		mcrne	p15, 0, r1, c3, c0, 0	@ load domain access control
 #endif
@@ -668,6 +673,7 @@ __armv7_mmu_cache_on:
 
 __fa526_cache_on:
 		mov	r12, lr
+		mov	r6, #CB_BITS | 0x12	@ U
 		bl	__setup_mmu
 		mov	r0, #0
 		mcr	p15, 0, r0, c7, c7, 0	@ Invalidate whole cache
@@ -680,18 +686,6 @@ __fa526_cache_on:
 		mcr	p15, 0, r0, c8, c7, 0	@ flush UTLB
 		mov	pc, r12
 
-__arm6_mmu_cache_on:
-		mov	r12, lr
-		bl	__setup_mmu
-		mov	r0, #0
-		mcr	p15, 0, r0, c7, c0, 0	@ invalidate whole cache v3
-		mcr	p15, 0, r0, c5, c0, 0	@ invalidate whole TLB v3
-		mov	r0, #0x30
-		bl	__common_mmu_cache_on
-		mov	r0, #0
-		mcr	p15, 0, r0, c5, c0, 0	@ invalidate whole TLB v3
-		mov	pc, r12
-
 __common_mmu_cache_on:
 #ifndef CONFIG_THUMB2_KERNEL
 #ifndef DEBUG
@@ -756,16 +750,6 @@ call_cache_fn:	adr	r12, proc_types
 		.align	2
 		.type	proc_types,#object
 proc_types:
-		.word	0x41560600		@ ARM6/610
-		.word	0xffffffe0
-		W(b)	__arm6_mmu_cache_off	@ works, but slow
-		W(b)	__arm6_mmu_cache_off
-		mov	pc, lr
- THUMB(		nop				)
-@		b	__arm6_mmu_cache_on		@ untested
-@		b	__arm6_mmu_cache_off
-@		b	__armv3_mmu_cache_flush
-
 		.word	0x00000000		@ old ARM ID
 		.word	0x0000f000
 		mov	pc, lr
@@ -777,8 +761,10 @@ proc_types:
 
 		.word	0x41007000		@ ARM7/710
 		.word	0xfff8fe00
-		W(b)	__arm7_mmu_cache_off
-		W(b)	__arm7_mmu_cache_off
+		mov	pc, lr
+ THUMB(		nop				)
+		mov	pc, lr
+ THUMB(		nop				)
 		mov	pc, lr
  THUMB(		nop				)
 
@@ -977,21 +963,6 @@ __armv7_mmu_cache_off:
 		mcr	p15, 0, r0, c7, c5, 4	@ ISB
 		mov	pc, r12
 
-__arm6_mmu_cache_off:
-		mov	r0, #0x00000030		@ ARM6 control reg.
-		b	__armv3_mmu_cache_off
-
-__arm7_mmu_cache_off:
-		mov	r0, #0x00000070		@ ARM7 control reg.
-		b	__armv3_mmu_cache_off
-
-__armv3_mmu_cache_off:
-		mcr	p15, 0, r0, c1, c0, 0	@ turn MMU and cache off
-		mov	r0, #0
-		mcr	p15, 0, r0, c7, c0, 0	@ invalidate whole cache v3
-		mcr	p15, 0, r0, c5, c0, 0	@ invalidate whole TLB v3
-		mov	pc, lr
-
 /*
  * Clean and flush the cache to maintain consistency.
  *
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
new file mode 100644
index 000000000000..f449efc9825f
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -0,0 +1,273 @@
+/*
+ * at91sam9260.dtsi - Device Tree Include file for AT91SAM9260 family SoC
+ *
+ *  Copyright (C) 2011 Atmel,
+ *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>,
+ *                2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9260 family SoC";
+	compatible = "atmel,at91sam9260";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		serial1 = &usart0;
+		serial2 = &usart1;
+		serial3 = &usart2;
+		serial4 = &usart3;
+		serial5 = &usart4;
+		serial6 = &usart5;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		tcb0 = &tcb0;
+		tcb1 = &tcb1;
+	};
+	cpus {
+		cpu@0 {
+			compatible = "arm,arm926ejs";
+		};
+	};
+
+	memory {
+		reg = <0x20000000 0x04000000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			aic: interrupt-controller@fffff000 {
+				#interrupt-cells = <2>;
+				compatible = "atmel,at91rm9200-aic";
+				interrupt-controller;
+				reg = <0xfffff000 0x200>;
+			};
+
+			ramc0: ramc@ffffea00 {
+				compatible = "atmel,at91sam9260-sdramc";
+				reg = <0xffffea00 0x200>;
+			};
+
+			pmc: pmc@fffffc00 {
+				compatible = "atmel,at91rm9200-pmc";
+				reg = <0xfffffc00 0x100>;
+			};
+
+			rstc@fffffd00 {
+				compatible = "atmel,at91sam9260-rstc";
+				reg = <0xfffffd00 0x10>;
+			};
+
+			shdwc@fffffd10 {
+				compatible = "atmel,at91sam9260-shdwc";
+				reg = <0xfffffd10 0x10>;
+			};
+
+			pit: timer@fffffd30 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffd30 0xf>;
+				interrupts = <1 4>;
+			};
+
+			tcb0: timer@fffa0000 {
+				compatible = "atmel,at91rm9200-tcb";
+				reg = <0xfffa0000 0x100>;
+				interrupts = <17 4 18 4 19 4>;
+			};
+
+			tcb1: timer@fffdc000 {
+				compatible = "atmel,at91rm9200-tcb";
+				reg = <0xfffdc000 0x100>;
+				interrupts = <26 4 27 4 28 4>;
+			};
+
+			pioA: gpio@fffff400 {
+				compatible = "atmel,at91rm9200-gpio";
+				reg = <0xfffff400 0x100>;
+				interrupts = <2 4>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+			};
+
+			pioB: gpio@fffff600 {
+				compatible = "atmel,at91rm9200-gpio";
+				reg = <0xfffff600 0x100>;
+				interrupts = <3 4>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+			};
+
+			pioC: gpio@fffff800 {
+				compatible = "atmel,at91rm9200-gpio";
+				reg = <0xfffff800 0x100>;
+				interrupts = <4 4>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+			};
+
+			dbgu: serial@fffff200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffff200 0x200>;
+				interrupts = <1 4>;
+				status = "disabled";
+			};
+
+			usart0: serial@fffb0000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb0000 0x200>;
+				interrupts = <6 4>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "disabled";
+			};
+
+			usart1: serial@fffb4000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb4000 0x200>;
+				interrupts = <7 4>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "disabled";
+			};
+
+			usart2: serial@fffb8000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb8000 0x200>;
+				interrupts = <8 4>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "disabled";
+			};
+
+			usart3: serial@fffd0000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffd0000 0x200>;
+				interrupts = <23 4>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "disabled";
+			};
+
+			usart4: serial@fffd4000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffd4000 0x200>;
+				interrupts = <24 4>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "disabled";
+			};
+
+			usart5: serial@fffd8000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffd8000 0x200>;
+				interrupts = <25 4>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "disabled";
+			};
+
+			macb0: ethernet@fffc4000 {
+				compatible = "cdns,at32ap7000-macb", "cdns,macb";
+				reg = <0xfffc4000 0x100>;
+				interrupts = <21 4>;
+				status = "disabled";
+			};
+
+			usb1: gadget@fffa4000 {
+				compatible = "atmel,at91rm9200-udc";
+				reg = <0xfffa4000 0x4000>;
+				interrupts = <10 4>;
+				status = "disabled";
+			};
+
+			adc0: adc@fffe0000 {
+				compatible = "atmel,at91sam9260-adc";
+				reg = <0xfffe0000 0x100>;
+				interrupts = <5 4>;
+				atmel,adc-use-external-triggers;
+				atmel,adc-channels-used = <0xf>;
+				atmel,adc-vref = <3300>;
+				atmel,adc-num-channels = <4>;
+				atmel,adc-startup-time = <15>;
+				atmel,adc-channel-base = <0x30>;
+				atmel,adc-drdy-mask = <0x10000>;
+				atmel,adc-status-register = <0x1c>;
+				atmel,adc-trigger-register = <0x04>;
+
+				trigger@0 {
+					trigger-name = "timer-counter-0";
+					trigger-value = <0x1>;
+				};
+				trigger@1 {
+					trigger-name = "timer-counter-1";
+					trigger-value = <0x3>;
+				};
+
+				trigger@2 {
+					trigger-name = "timer-counter-2";
+					trigger-value = <0x5>;
+				};
+
+				trigger@3 {
+					trigger-name = "external";
+					trigger-value = <0x13>;
+					trigger-external;
+				};
+			};
+		};
+
+		nand0: nand@40000000 {
+			compatible = "atmel,at91rm9200-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x40000000 0x10000000
+			       0xffffe800 0x200
+			      >;
+			atmel,nand-addr-offset = <21>;
+			atmel,nand-cmd-offset = <22>;
+			gpios = <&pioC 13 0
+				 &pioC 14 0
+				 0
+				>;
+			status = "disabled";
+		};
+
+		usb0: ohci@00500000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00500000 0x100000>;
+			interrupts = <20 4>;
+			status = "disabled";
+		};
+	};
+
+	i2c@0 {
+		compatible = "i2c-gpio";
+		gpios = <&pioA 23 0 /* sda */
+			 &pioA 24 0 /* scl */
+			>;
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
new file mode 100644
index 000000000000..0209913a65a2
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -0,0 +1,220 @@
+/*
+ * at91sam9263.dtsi - Device Tree Include file for AT91SAM9263 family SoC
+ *
+ *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2 only.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9263 family SoC";
+	compatible = "atmel,at91sam9263";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		serial1 = &usart0;
+		serial2 = &usart1;
+		serial3 = &usart2;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		gpio3 = &pioD;
+		gpio4 = &pioE;
+		tcb0 = &tcb0;
+	};
+	cpus {
+		cpu@0 {
+			compatible = "arm,arm926ejs";
+		};
+	};
+
+	memory {
+		reg = <0x20000000 0x08000000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			aic: interrupt-controller@fffff000 {
+				#interrupt-cells = <2>;
+				compatible = "atmel,at91rm9200-aic";
+				interrupt-controller;
+				reg = <0xfffff000 0x200>;
+			};
+
+			pmc: pmc@fffffc00 {
+				compatible = "atmel,at91rm9200-pmc";
+				reg = <0xfffffc00 0x100>;
+			};
+
+			ramc: ramc@ffffe200 {
+				compatible = "atmel,at91sam9260-sdramc";
+				reg = <0xffffe200 0x200
+				       0xffffe800 0x200>;
+			};
+
+			pit: timer@fffffd30 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffd30 0xf>;
+				interrupts = <1 4>;
+			};
+
+			tcb0: timer@fff7c000 {
+				compatible = "atmel,at91rm9200-tcb";
+				reg = <0xfff7c000 0x100>;
+				interrupts = <19 4>;
+			};
+
+			rstc@fffffd00 {
+				compatible = "atmel,at91sam9260-rstc";
+				reg = <0xfffffd00 0x10>;
+			};
+
+			shdwc@fffffd10 {
+				compatible = "atmel,at91sam9260-shdwc";
+				reg = <0xfffffd10 0x10>;
+			};
+
+			pioA: gpio@fffff200 {
+				compatible = "atmel,at91rm9200-gpio";
+				reg = <0xfffff200 0x100>;
+				interrupts = <2 4>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+			};
+
+			pioB: gpio@fffff400 {
+				compatible = "atmel,at91rm9200-gpio";
+				reg = <0xfffff400 0x100>;
+				interrupts = <3 4>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+			};
+
+			pioC: gpio@fffff600 {
+				compatible = "atmel,at91rm9200-gpio";
+				reg = <0xfffff600 0x100>;
+				interrupts = <4 4>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+			};
+
+			pioD: gpio@fffff800 {
+				compatible = "atmel,at91rm9200-gpio";
+				reg = <0xfffff800 0x100>;
+				interrupts = <4 4>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+			};
+
+			pioE: gpio@fffffa00 {
+				compatible = "atmel,at91rm9200-gpio";
+				reg = <0xfffffa00 0x100>;
+				interrupts = <4 4>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+			};
+
+			dbgu: serial@ffffee00 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xffffee00 0x200>;
+				interrupts = <1 4>;
+				status = "disabled";
+			};
+
+			usart0: serial@fff8c000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfff8c000 0x200>;
+				interrupts = <7 4>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "disabled";
+			};
+
+			usart1: serial@fff90000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfff90000 0x200>;
+				interrupts = <8 4>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "disabled";
+			};
+
+			usart2: serial@fff94000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfff94000 0x200>;
+				interrupts = <9 4>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "disabled";
+			};
+
+			macb0: ethernet@fffbc000 {
+				compatible = "cdns,at32ap7000-macb", "cdns,macb";
+				reg = <0xfffbc000 0x100>;
+				interrupts = <21 4>;
+				status = "disabled";
+			};
+
+			usb1: gadget@fff78000 {
+				compatible = "atmel,at91rm9200-udc";
+				reg = <0xfff78000 0x4000>;
+				interrupts = <24 4>;
+				status = "disabled";
+			};
+		};
+
+		nand0: nand@40000000 {
+			compatible = "atmel,at91rm9200-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x40000000 0x10000000
+			       0xffffe000 0x200
+			      >;
+			atmel,nand-addr-offset = <21>;
+			atmel,nand-cmd-offset = <22>;
+			gpios = <&pioA 22 0
+				 &pioD 15 0
+				 0
+				>;
+			status = "disabled";
+		};
+
+		usb0: ohci@00a00000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00a00000 0x100000>;
+			interrupts = <29 4>;
+			status = "disabled";
+		};
+	};
+
+	i2c@0 {
+		compatible = "i2c-gpio";
+		gpios = <&pioB 4 0 /* sda */
+			 &pioB 5 0 /* scl */
+			>;
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts
new file mode 100644
index 000000000000..f86ac4b609fc
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9263ek.dts
@@ -0,0 +1,156 @@
+/*
+ * at91sam9263ek.dts - Device Tree file for Atmel at91sam9263 reference board
+ *
+ *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2 only
+ */
+/dts-v1/;
+/include/ "at91sam9263.dtsi"
+
+/ {
+	model = "Atmel at91sam9263ek";
+	compatible = "atmel,at91sam9263ek", "atmel,at91sam9263", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
+	};
+
+	memory {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		main_clock: clock@0 {
+			compatible = "atmel,osc", "fixed-clock";
+			clock-frequency = <16367660>;
+		};
+	};
+
+	ahb {
+		apb {
+			dbgu: serial@ffffee00 {
+				status = "okay";
+			};
+
+			usart0: serial@fff8c000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@fffbc000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			usb1: gadget@fff78000 {
+				atmel,vbus-gpio = <&pioA 25 0>;
+				status = "okay";
+			};
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			nand-on-flash-bbt = <1>;
+			status = "okay";
+
+			at91bootstrap@0 {
+				label = "at91bootstrap";
+				reg = <0x0 0x20000>;
+			};
+
+			barebox@20000 {
+				label = "barebox";
+				reg = <0x20000 0x40000>;
+			};
+
+			bareboxenv@60000 {
+				label = "bareboxenv";
+				reg = <0x60000 0x20000>;
+			};
+
+			bareboxenv2@80000 {
+				label = "bareboxenv2";
+				reg = <0x80000 0x20000>;
+			};
+
+			oftree@80000 {
+				label = "oftree";
+				reg = <0xa0000 0x20000>;
+			};
+
+			kernel@a0000 {
+				label = "kernel";
+				reg = <0xc0000 0x400000>;
+			};
+
+			rootfs@4a0000 {
+				label = "rootfs";
+				reg = <0x4c0000 0x7800000>;
+			};
+
+			data@7ca0000 {
+				label = "data";
+				reg = <0x7cc0000 0x8340000>;
+			};
+		};
+
+		usb0: ohci@00a00000 {
+			num-ports = <2>;
+			status = "okay";
+			atmel,vbus-gpio = <&pioA 24 0
+					   &pioA 21 0
+					  >;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		d3 {
+			label = "d3";
+			gpios = <&pioB 7 0>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		d2 {
+			label = "d2";
+			gpios = <&pioC 29 1>;
+			linux,default-trigger = "nand-disk";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		left_click {
+			label = "left_click";
+			gpios = <&pioC 5 1>;
+			linux,code = <272>;
+			gpio-key,wakeup;
+		};
+
+		right_click {
+			label = "right_click";
+			gpios = <&pioC 4 1>;
+			linux,code = <273>;
+			gpio-key,wakeup;
+		};
+	};
+
+	i2c@0 {
+		status = "okay";
+
+		24c512@50 {
+			compatible = "24c512";
+			reg = <0x50>;
+			pagesize = <128>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi
index 92f36627e7f8..2a1d1ca8bd86 100644
--- a/arch/arm/boot/dts/at91sam9g20.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20.dtsi
@@ -1,239 +1,26 @@
 /*
  * at91sam9g20.dtsi - Device Tree Include file for AT91SAM9G20 family SoC
  *
- *  Copyright (C) 2011 Atmel,
- *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>,
- *                2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
  *
- * Licensed under GPLv2 or later.
+ * Licensed under GPLv2.
  */
 
-/include/ "skeleton.dtsi"
+/include/ "at91sam9260.dtsi"
 
 / {
 	model = "Atmel AT91SAM9G20 family SoC";
 	compatible = "atmel,at91sam9g20";
-	interrupt-parent = <&aic>;
 
-	aliases {
-		serial0 = &dbgu;
-		serial1 = &usart0;
-		serial2 = &usart1;
-		serial3 = &usart2;
-		serial4 = &usart3;
-		serial5 = &usart4;
-		serial6 = &usart5;
-		gpio0 = &pioA;
-		gpio1 = &pioB;
-		gpio2 = &pioC;
-		tcb0 = &tcb0;
-		tcb1 = &tcb1;
-	};
-	cpus {
-		cpu@0 {
-			compatible = "arm,arm926ejs";
-		};
-	};
-
-	memory@20000000 {
+	memory {
 		reg = <0x20000000 0x08000000>;
 	};
 
 	ahb {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
 		apb {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			aic: interrupt-controller@fffff000 {
-				#interrupt-cells = <2>;
-				compatible = "atmel,at91rm9200-aic";
-				interrupt-controller;
-				interrupt-parent;
-				reg = <0xfffff000 0x200>;
-			};
-
-			ramc0: ramc@ffffea00 {
-				compatible = "atmel,at91sam9260-sdramc";
-				reg = <0xffffea00 0x200>;
-			};
-
-			pmc: pmc@fffffc00 {
-				compatible = "atmel,at91rm9200-pmc";
-				reg = <0xfffffc00 0x100>;
-			};
-
-			rstc@fffffd00 {
-				compatible = "atmel,at91sam9260-rstc";
-				reg = <0xfffffd00 0x10>;
-			};
-
-			shdwc@fffffd10 {
-				compatible = "atmel,at91sam9260-shdwc";
-				reg = <0xfffffd10 0x10>;
-			};
-
-			pit: timer@fffffd30 {
-				compatible = "atmel,at91sam9260-pit";
-				reg = <0xfffffd30 0xf>;
-				interrupts = <1 4>;
-			};
-
-			tcb0: timer@fffa0000 {
-				compatible = "atmel,at91rm9200-tcb";
-				reg = <0xfffa0000 0x100>;
-				interrupts = <17 4 18 4 19 4>;
-			};
-
-			tcb1: timer@fffdc000 {
-				compatible = "atmel,at91rm9200-tcb";
-				reg = <0xfffdc000 0x100>;
-				interrupts = <26 4 27 4 28 4>;
-			};
-
-			pioA: gpio@fffff400 {
-				compatible = "atmel,at91rm9200-gpio";
-				reg = <0xfffff400 0x100>;
-				interrupts = <2 4>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-			};
-
-			pioB: gpio@fffff600 {
-				compatible = "atmel,at91rm9200-gpio";
-				reg = <0xfffff600 0x100>;
-				interrupts = <3 4>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-			};
-
-			pioC: gpio@fffff800 {
-				compatible = "atmel,at91rm9200-gpio";
-				reg = <0xfffff800 0x100>;
-				interrupts = <4 4>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-			};
-
-			dbgu: serial@fffff200 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfffff200 0x200>;
-				interrupts = <1 4>;
-				status = "disabled";
-			};
-
-			usart0: serial@fffb0000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfffb0000 0x200>;
-				interrupts = <6 4>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				status = "disabled";
-			};
-
-			usart1: serial@fffb4000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfffb4000 0x200>;
-				interrupts = <7 4>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				status = "disabled";
-			};
-
-			usart2: serial@fffb8000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfffb8000 0x200>;
-				interrupts = <8 4>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				status = "disabled";
-			};
-
-			usart3: serial@fffd0000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfffd0000 0x200>;
-				interrupts = <23 4>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				status = "disabled";
-			};
-
-			usart4: serial@fffd4000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfffd4000 0x200>;
-				interrupts = <24 4>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				status = "disabled";
-			};
-
-			usart5: serial@fffd8000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfffd8000 0x200>;
-				interrupts = <25 4>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				status = "disabled";
-			};
-
-			macb0: ethernet@fffc4000 {
-				compatible = "cdns,at32ap7000-macb", "cdns,macb";
-				reg = <0xfffc4000 0x100>;
-				interrupts = <21 4>;
-				status = "disabled";
-			};
-
-			usb1: gadget@fffa4000 {
-				compatible = "atmel,at91rm9200-udc";
-				reg = <0xfffa4000 0x4000>;
-				interrupts = <10 4>;
-				status = "disabled";
+			adc0: adc@fffe0000 {
+				atmel,adc-startup-time = <40>;
 			};
 		};
-
-		nand0: nand@40000000 {
-			compatible = "atmel,at91rm9200-nand";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x40000000 0x10000000
-			       0xffffe800 0x200
-			      >;
-			atmel,nand-addr-offset = <21>;
-			atmel,nand-cmd-offset = <22>;
-			gpios = <&pioC 13 0
-				 &pioC 14 0
-				 0
-				>;
-			status = "disabled";
-		};
-
-		usb0: ohci@00500000 {
-			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
-			reg = <0x00500000 0x100000>;
-			interrupts = <20 4>;
-			status = "disabled";
-		};
-	};
-
-	i2c@0 {
-		compatible = "i2c-gpio";
-		gpios = <&pioA 23 0 /* sda */
-			 &pioA 24 0 /* scl */
-			>;
-		i2c-gpio,sda-open-drain;
-		i2c-gpio,scl-open-drain;
-		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
 	};
 };
diff --git a/arch/arm/boot/dts/at91sam9g20ek.dts b/arch/arm/boot/dts/at91sam9g20ek.dts
new file mode 100644
index 000000000000..e5324bf9d529
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9g20ek.dts
@@ -0,0 +1,29 @@
+/*
+ * at91sam9g20ek.dts - Device Tree file for Atmel at91sam9g20ek board
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+/dts-v1/;
+/include/ "at91sam9g20ek_common.dtsi"
+
+/ {
+	model = "Atmel at91sam9g20ek";
+	compatible = "atmel,at91sam9g20ek", "atmel,at91sam9g20", "atmel,at91sam9";
+
+	leds {
+		compatible = "gpio-leds";
+
+		ds1 {
+			label = "ds1";
+			gpios = <&pioA 9 0>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		ds5 {
+			label = "ds5";
+			gpios = <&pioA 6 1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts b/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts
new file mode 100644
index 000000000000..f1b2e148ac8c
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts
@@ -0,0 +1,29 @@
+/*
+ * at91sam9g20ek_2mmc.dts - Device Tree file for Atmel at91sam9g20ek 2 MMC board
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+/dts-v1/;
+/include/ "at91sam9g20ek_common.dtsi"
+
+/ {
+	model = "Atmel at91sam9g20ek 2 mmc";
+	compatible = "atmel,at91sam9g20ek_2mmc", "atmel,at91sam9g20", "atmel,at91sam9";
+
+	leds {
+		compatible = "gpio-leds";
+
+		ds1 {
+			label = "ds1";
+			gpios = <&pioB 9 0>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		ds5 {
+			label = "ds5";
+			gpios = <&pioB 8 1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
new file mode 100644
index 000000000000..b06c0db273b1
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
@@ -0,0 +1,142 @@
+/*
+ * at91sam9g20ek_common.dtsi - Device Tree file for Atmel at91sam9g20ek board
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+/include/ "at91sam9g20.dtsi"
+
+/ {
+
+	chosen {
+		bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
+	};
+
+	memory {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		main_clock: clock@0 {
+			compatible = "atmel,osc", "fixed-clock";
+			clock-frequency = <18432000>;
+		};
+	};
+
+	ahb {
+		apb {
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			usart0: serial@fffb0000 {
+				status = "okay";
+			};
+
+			usart1: serial@fffb4000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@fffc4000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			usb1: gadget@fffa4000 {
+				atmel,vbus-gpio = <&pioC 5 0>;
+				status = "okay";
+			};
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			nand-on-flash-bbt;
+			status = "okay";
+
+			at91bootstrap@0 {
+				label = "at91bootstrap";
+				reg = <0x0 0x20000>;
+			};
+
+			barebox@20000 {
+				label = "barebox";
+				reg = <0x20000 0x40000>;
+			};
+
+			bareboxenv@60000 {
+				label = "bareboxenv";
+				reg = <0x60000 0x20000>;
+			};
+
+			bareboxenv2@80000 {
+				label = "bareboxenv2";
+				reg = <0x80000 0x20000>;
+			};
+
+			oftree@80000 {
+				label = "oftree";
+				reg = <0xa0000 0x20000>;
+			};
+
+			kernel@a0000 {
+				label = "kernel";
+				reg = <0xc0000 0x400000>;
+			};
+
+			rootfs@4a0000 {
+				label = "rootfs";
+				reg = <0x4c0000 0x7800000>;
+			};
+
+			data@7ca0000 {
+				label = "data";
+				reg = <0x7cc0000 0x8340000>;
+			};
+		};
+
+		usb0: ohci@00500000 {
+			num-ports = <2>;
+			status = "okay";
+		};
+	};
+
+	i2c@0 {
+		status = "okay";
+
+		24c512@50 {
+			compatible = "24c512";
+			reg = <0x50>;
+		};
+
+		wm8731@1b {
+			compatible = "wm8731";
+			reg = <0x1b>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		btn3 {
+			label = "Buttin 3";
+			gpios = <&pioA 30 1>;
+			linux,code = <0x103>;
+			gpio-key,wakeup;
+		};
+
+		btn4 {
+			label = "Buttin 4";
+			gpios = <&pioA 31 1>;
+			linux,code = <0x104>;
+			gpio-key,wakeup;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts
index ac0dc0031dda..7829a4d0cb22 100644
--- a/arch/arm/boot/dts/at91sam9g25ek.dts
+++ b/arch/arm/boot/dts/at91sam9g25ek.dts
@@ -37,8 +37,8 @@
 		usb0: ohci@00600000 {
 			status = "okay";
 			num-ports = <2>;
-			atmel,vbus-gpio = <&pioD 19 0
-					   &pioD 20 0
+			atmel,vbus-gpio = <&pioD 19 1
+					   &pioD 20 1
 					  >;
 		};
 
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index 3d0c32fb218f..7dbccaf199f7 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -36,7 +36,7 @@
 		};
 	};
 
-	memory@70000000 {
+	memory {
 		reg = <0x70000000 0x10000000>;
 	};
 
@@ -56,7 +56,6 @@
 				#interrupt-cells = <2>;
 				compatible = "atmel,at91rm9200-aic";
 				interrupt-controller;
-				interrupt-parent;
 				reg = <0xfffff000 0x200>;
 			};
 
@@ -200,6 +199,43 @@
 				interrupts = <25 4>;
 				status = "disabled";
 			};
+
+			adc0: adc@fffb0000 {
+				compatible = "atmel,at91sam9260-adc";
+				reg = <0xfffb0000 0x100>;
+				interrupts = <20 4>;
+				atmel,adc-use-external-triggers;
+				atmel,adc-channels-used = <0xff>;
+				atmel,adc-vref = <3300>;
+				atmel,adc-num-channels = <8>;
+				atmel,adc-startup-time = <40>;
+				atmel,adc-channel-base = <0x30>;
+				atmel,adc-drdy-mask = <0x10000>;
+				atmel,adc-status-register = <0x1c>;
+				atmel,adc-trigger-register = <0x08>;
+
+				trigger@0 {
+					trigger-name = "external-rising";
+					trigger-value = <0x1>;
+					trigger-external;
+				};
+				trigger@1 {
+					trigger-name = "external-falling";
+					trigger-value = <0x2>;
+					trigger-external;
+				};
+
+				trigger@2 {
+					trigger-name = "external-any";
+					trigger-value = <0x3>;
+					trigger-external;
+				};
+
+				trigger@3 {
+					trigger-name = "continuous";
+					trigger-value = <0x6>;
+				};
+			};
 		};
 
 		nand0: nand@40000000 {
diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
index c4c8ae4123d5..a3633bd13111 100644
--- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
+++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
@@ -17,7 +17,7 @@
 		bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2";
 	};
 
-	memory@70000000 {
+	memory {
 		reg = <0x70000000 0x4000000>;
 	};
 
@@ -73,8 +73,8 @@
 		usb0: ohci@00700000 {
 			status = "okay";
 			num-ports = <2>;
-			atmel,vbus-gpio = <&pioD 1 0
-					   &pioD 3 0>;
+			atmel,vbus-gpio = <&pioD 1 1
+					   &pioD 3 1>;
 		};
 
 		usb1: ehci@00800000 {
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
new file mode 100644
index 000000000000..cb84de791b5a
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -0,0 +1,221 @@
+/*
+ * at91sam9n12.dtsi - Device Tree include file for AT91SAM9N12 SoC
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Hong Xu <hong.xu@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9N12 SoC";
+	compatible = "atmel,at91sam9n12";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		serial1 = &usart0;
+		serial2 = &usart1;
+		serial3 = &usart2;
+		serial4 = &usart3;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		gpio3 = &pioD;
+		tcb0 = &tcb0;
+		tcb1 = &tcb1;
+	};
+	cpus {
+		cpu@0 {
+			compatible = "arm,arm926ejs";
+		};
+	};
+
+	memory {
+		reg = <0x20000000 0x10000000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			aic: interrupt-controller@fffff000 {
+				#interrupt-cells = <2>;
+				compatible = "atmel,at91rm9200-aic";
+				interrupt-controller;
+				reg = <0xfffff000 0x200>;
+			};
+
+			ramc0: ramc@ffffe800 {
+				compatible = "atmel,at91sam9g45-ddramc";
+				reg = <0xffffe800 0x200>;
+			};
+
+			pmc: pmc@fffffc00 {
+				compatible = "atmel,at91rm9200-pmc";
+				reg = <0xfffffc00 0x100>;
+			};
+
+			rstc@fffffe00 {
+				compatible = "atmel,at91sam9g45-rstc";
+				reg = <0xfffffe00 0x10>;
+			};
+
+			pit: timer@fffffe30 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffe30 0xf>;
+				interrupts = <1 4>;
+			};
+
+			shdwc@fffffe10 {
+				compatible = "atmel,at91sam9x5-shdwc";
+				reg = <0xfffffe10 0x10>;
+			};
+
+			tcb0: timer@f8008000 {
+				compatible = "atmel,at91sam9x5-tcb";
+				reg = <0xf8008000 0x100>;
+				interrupts = <17 4>;
+			};
+
+			tcb1: timer@f800c000 {
+				compatible = "atmel,at91sam9x5-tcb";
+				reg = <0xf800c000 0x100>;
+				interrupts = <17 4>;
+			};
+
+			dma: dma-controller@ffffec00 {
+				compatible = "atmel,at91sam9g45-dma";
+				reg = <0xffffec00 0x200>;
+				interrupts = <20 4>;
+			};
+
+			pioA: gpio@fffff400 {
+				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+				reg = <0xfffff400 0x100>;
+				interrupts = <2 4>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+			};
+
+			pioB: gpio@fffff600 {
+				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+				reg = <0xfffff600 0x100>;
+				interrupts = <2 4>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+			};
+
+			pioC: gpio@fffff800 {
+				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+				reg = <0xfffff800 0x100>;
+				interrupts = <3 4>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+			};
+
+			pioD: gpio@fffffa00 {
+				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+				reg = <0xfffffa00 0x100>;
+				interrupts = <3 4>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+			};
+
+			dbgu: serial@fffff200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffff200 0x200>;
+				interrupts = <1 4>;
+				status = "disabled";
+			};
+
+			usart0: serial@f801c000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf801c000 0x4000>;
+				interrupts = <5 4>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "disabled";
+			};
+
+			usart1: serial@f8020000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8020000 0x4000>;
+				interrupts = <6 4>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "disabled";
+			};
+
+			usart2: serial@f8024000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8024000 0x4000>;
+				interrupts = <7 4>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "disabled";
+			};
+
+			usart3: serial@f8028000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8028000 0x4000>;
+				interrupts = <8 4>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "disabled";
+			};
+		};
+
+		nand0: nand@40000000 {
+			compatible = "atmel,at91rm9200-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = < 0x40000000 0x10000000
+				0xffffe000 0x00000600
+				0xffffe600 0x00000200
+				0x00100000 0x00100000
+			       >;
+			atmel,nand-addr-offset = <21>;
+			atmel,nand-cmd-offset = <22>;
+			gpios = <&pioD 5 0
+				 &pioD 4 0
+				 0
+				>;
+			status = "disabled";
+		};
+
+		usb0: ohci@00500000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00500000 0x00100000>;
+			interrupts = <22 4>;
+			status = "disabled";
+		};
+	};
+
+	i2c@0 {
+		compatible = "i2c-gpio";
+		gpios = <&pioA 30 0 /* sda */
+			 &pioA 31 0 /* scl */
+			>;
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts
new file mode 100644
index 000000000000..f4e43e38f3a1
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9n12ek.dts
@@ -0,0 +1,84 @@
+/*
+ * at91sam9n12ek.dts - Device Tree file for AT91SAM9N12-EK board
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Hong Xu <hong.xu@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+/include/ "at91sam9n12.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9N12-EK";
+	compatible = "atmel,at91sam9n12ek", "atmel,at91sam9n12", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "mem=128M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2";
+	};
+
+	memory {
+		reg = <0x20000000 0x10000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		main_clock: clock@0 {
+			compatible = "atmel,osc", "fixed-clock";
+			clock-frequency = <16000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			nand-on-flash-bbt;
+			status = "okay";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		d8 {
+			label = "d8";
+			gpios = <&pioB 4 1>;
+			linux,default-trigger = "mmc0";
+		};
+
+		d9 {
+			label = "d6";
+			gpios = <&pioB 5 1>;
+			linux,default-trigger = "nand-disk";
+		};
+
+		d10 {
+			label = "d7";
+			gpios = <&pioB 6 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		enter {
+			label = "Enter";
+			gpios = <&pioB 4 1>;
+			linux,code = <28>;
+			gpio-key,wakeup;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index c111001f254e..6b3ef4339ae7 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -34,7 +34,7 @@
 		};
 	};
 
-	memory@20000000 {
+	memory {
 		reg = <0x20000000 0x10000000>;
 	};
 
@@ -54,7 +54,6 @@
 				#interrupt-cells = <2>;
 				compatible = "atmel,at91rm9200-aic";
 				interrupt-controller;
-				interrupt-parent;
 				reg = <0xfffff000 0x200>;
 			};
 
@@ -191,6 +190,44 @@
 				interrupts = <27 4>;
 				status = "disabled";
 			};
+
+			adc0: adc@f804c000 {
+				compatible = "atmel,at91sam9260-adc";
+				reg = <0xf804c000 0x100>;
+				interrupts = <19 4>;
+				atmel,adc-use-external;
+				atmel,adc-channels-used = <0xffff>;
+				atmel,adc-vref = <3300>;
+				atmel,adc-num-channels = <12>;
+				atmel,adc-startup-time = <40>;
+				atmel,adc-channel-base = <0x50>;
+				atmel,adc-drdy-mask = <0x1000000>;
+				atmel,adc-status-register = <0x30>;
+				atmel,adc-trigger-register = <0xc0>;
+
+				trigger@0 {
+					trigger-name = "external-rising";
+					trigger-value = <0x1>;
+					trigger-external;
+				};
+
+				trigger@1 {
+					trigger-name = "external-falling";
+					trigger-value = <0x2>;
+					trigger-external;
+				};
+
+				trigger@2 {
+					trigger-name = "external-any";
+					trigger-value = <0x3>;
+					trigger-external;
+				};
+
+				trigger@3 {
+					trigger-name = "continuous";
+					trigger-value = <0x6>;
+				};
+			};
 		};
 
 		nand0: nand@40000000 {
@@ -201,8 +238,8 @@
 			      >;
 			atmel,nand-addr-offset = <21>;
 			atmel,nand-cmd-offset = <22>;
-			gpios = <&pioC 8 0
-				 &pioC 14 0
+			gpios = <&pioD 5 0
+				 &pioD 4 0
 				 0
 				>;
 			status = "disabled";
diff --git a/arch/arm/boot/dts/at91sam9x5cm.dtsi b/arch/arm/boot/dts/at91sam9x5cm.dtsi
index 67936f83c694..31e7be23703d 100644
--- a/arch/arm/boot/dts/at91sam9x5cm.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5cm.dtsi
@@ -8,7 +8,7 @@
  */
 
 / {
-	memory@20000000 {
+	memory {
 		reg = <0x20000000 0x8000000>;
 	};
 
diff --git a/arch/arm/boot/dts/db8500.dtsi b/arch/arm/boot/dts/db8500.dtsi
index d73dce645667..4ad5160018cb 100644
--- a/arch/arm/boot/dts/db8500.dtsi
+++ b/arch/arm/boot/dts/db8500.dtsi
@@ -24,7 +24,6 @@
 			#interrupt-cells = <3>;
 			#address-cells = <1>;
 			interrupt-controller;
-			interrupt-parent;
 			reg = <0xa0411000 0x1000>,
 			      <0xa0410100 0x100>;
 		};
@@ -56,83 +55,123 @@
 
 		gpio0: gpio@8012e000 {
 			compatible = "stericsson,db8500-gpio",
-				"stmicroelectronics,nomadik-gpio";
+				"st,nomadik-gpio";
 			reg =  <0x8012e000 0x80>;
 			interrupts = <0 119 0x4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 			supports-sleepmode;
 			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <0>;
 		};
 
 		gpio1: gpio@8012e080 {
 			compatible = "stericsson,db8500-gpio",
-				"stmicroelectronics,nomadik-gpio";
+				"st,nomadik-gpio";
 			reg =  <0x8012e080 0x80>;
 			interrupts = <0 120 0x4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 			supports-sleepmode;
 			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <1>;
 		};
 
 		gpio2: gpio@8000e000 {
 			compatible = "stericsson,db8500-gpio",
-				"stmicroelectronics,nomadik-gpio";
+				"st,nomadik-gpio";
 			reg =  <0x8000e000 0x80>;
 			interrupts = <0 121 0x4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 			supports-sleepmode;
 			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <2>;
 		};
 
 		gpio3: gpio@8000e080 {
 			compatible = "stericsson,db8500-gpio",
-				"stmicroelectronics,nomadik-gpio";
+				"st,nomadik-gpio";
 			reg =  <0x8000e080 0x80>;
 			interrupts = <0 122 0x4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 			supports-sleepmode;
 			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <3>;
 		};
 
 		gpio4: gpio@8000e100 {
 			compatible = "stericsson,db8500-gpio",
-				"stmicroelectronics,nomadik-gpio";
+				"st,nomadik-gpio";
 			reg =  <0x8000e100 0x80>;
 			interrupts = <0 123 0x4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 			supports-sleepmode;
 			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <4>;
 		};
 
 		gpio5: gpio@8000e180 {
 			compatible = "stericsson,db8500-gpio",
-				"stmicroelectronics,nomadik-gpio";
+				"st,nomadik-gpio";
 			reg =  <0x8000e180 0x80>;
 			interrupts = <0 124 0x4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 			supports-sleepmode;
 			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <5>;
 		};
 
 		gpio6: gpio@8011e000 {
 			compatible = "stericsson,db8500-gpio",
-				"stmicroelectronics,nomadik-gpio";
+				"st,nomadik-gpio";
 			reg =  <0x8011e000 0x80>;
 			interrupts = <0 125 0x4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 			supports-sleepmode;
 			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <6>;
 		};
 
 		gpio7: gpio@8011e080 {
 			compatible = "stericsson,db8500-gpio",
-				"stmicroelectronics,nomadik-gpio";
+				"st,nomadik-gpio";
 			reg =  <0x8011e080 0x80>;
 			interrupts = <0 126 0x4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 			supports-sleepmode;
 			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <7>;
 		};
 
 		gpio8: gpio@a03fe000 {
 			compatible = "stericsson,db8500-gpio",
-				"stmicroelectronics,nomadik-gpio";
+				"st,nomadik-gpio";
 			reg =  <0xa03fe000 0x80>;
 			interrupts = <0 127 0x4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 			supports-sleepmode;
 			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <8>;
+		};
+
+		pinctrl {
+			compatible = "stericsson,nmk_pinctrl";
 		};
 
 		usb@a03e0000 {
@@ -152,19 +191,200 @@
 		prcmu@80157000 {
 			compatible = "stericsson,db8500-prcmu";
 			reg = <0x80157000 0x1000>;
-			interrupts = <46 47>;
+			interrupts = <0 47 0x4>;
 			#address-cells = <1>;
-			#size-cells = <0>;
+			#size-cells = <1>;
+			ranges;
+
+			prcmu-timer-4@80157450 {
+				compatible = "stericsson,db8500-prcmu-timer-4";
+				reg = <0x80157450 0xC>;
+			};
+
+			db8500-prcmu-regulators {
+				compatible = "stericsson,db8500-prcmu-regulator";
+
+				// DB8500_REGULATOR_VAPE
+				db8500_vape_reg: db8500_vape {
+					regulator-name = "db8500-vape";
+					regulator-always-on;
+				};
+
+				// DB8500_REGULATOR_VARM
+				db8500_varm_reg: db8500_varm {
+					regulator-name = "db8500-varm";
+				};
+
+				// DB8500_REGULATOR_VMODEM
+				db8500_vmodem_reg: db8500_vmodem {
+					regulator-name = "db8500-vmodem";
+				};
+
+				// DB8500_REGULATOR_VPLL
+				db8500_vpll_reg: db8500_vpll {
+					regulator-name = "db8500-vpll";
+				};
+
+				// DB8500_REGULATOR_VSMPS1
+				db8500_vsmps1_reg: db8500_vsmps1 {
+					regulator-name = "db8500-vsmps1";
+				};
+
+				// DB8500_REGULATOR_VSMPS2
+				db8500_vsmps2_reg: db8500_vsmps2 {
+					regulator-name = "db8500-vsmps2";
+				};
+
+				// DB8500_REGULATOR_VSMPS3
+				db8500_vsmps3_reg: db8500_vsmps3 {
+					regulator-name = "db8500-vsmps3";
+				};
+
+				// DB8500_REGULATOR_VRF1
+				db8500_vrf1_reg: db8500_vrf1 {
+					regulator-name = "db8500-vrf1";
+				};
+
+				// DB8500_REGULATOR_SWITCH_SVAMMDSP
+				db8500_sva_mmdsp_reg: db8500_sva_mmdsp {
+					regulator-name = "db8500-sva-mmdsp";
+				};
+
+				// DB8500_REGULATOR_SWITCH_SVAMMDSPRET
+				db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret {
+					regulator-name = "db8500-sva-mmdsp-ret";
+				};
+
+				// DB8500_REGULATOR_SWITCH_SVAPIPE
+				db8500_sva_pipe_reg: db8500_sva_pipe {
+					regulator-name = "db8500_sva_pipe";
+				};
+
+				// DB8500_REGULATOR_SWITCH_SIAMMDSP
+				db8500_sia_mmdsp_reg: db8500_sia_mmdsp {
+					regulator-name = "db8500_sia_mmdsp";
+				};
+
+				// DB8500_REGULATOR_SWITCH_SIAMMDSPRET
+				db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret {
+					regulator-name = "db8500-sia-mmdsp-ret";
+				};
+
+				// DB8500_REGULATOR_SWITCH_SIAPIPE
+				db8500_sia_pipe_reg: db8500_sia_pipe {
+					regulator-name = "db8500-sia-pipe";
+				};
+
+				// DB8500_REGULATOR_SWITCH_SGA
+				db8500_sga_reg: db8500_sga {
+					regulator-name = "db8500-sga";
+					vin-supply = <&db8500_vape_reg>;
+				};
+
+				// DB8500_REGULATOR_SWITCH_B2R2_MCDE
+				db8500_b2r2_mcde_reg: db8500_b2r2_mcde {
+					regulator-name = "db8500-b2r2-mcde";
+					vin-supply = <&db8500_vape_reg>;
+				};
+
+				// DB8500_REGULATOR_SWITCH_ESRAM12
+				db8500_esram12_reg: db8500_esram12 {
+					regulator-name = "db8500-esram12";
+				};
+
+				// DB8500_REGULATOR_SWITCH_ESRAM12RET
+				db8500_esram12_ret_reg: db8500_esram12_ret {
+					regulator-name = "db8500-esram12-ret";
+				};
+
+				// DB8500_REGULATOR_SWITCH_ESRAM34
+				db8500_esram34_reg: db8500_esram34 {
+					regulator-name = "db8500-esram34";
+				};
+
+				// DB8500_REGULATOR_SWITCH_ESRAM34RET
+				db8500_esram34_ret_reg: db8500_esram34_ret {
+					regulator-name = "db8500-esram34-ret";
+				};
+			};
 
 			ab8500@5 {
 				compatible = "stericsson,ab8500";
 				reg = <5>; /* mailbox 5 is i2c */
 				interrupts = <0 40 0x4>;
+
+				ab8500-regulators {
+					compatible = "stericsson,ab8500-regulator";
+
+					// supplies to the display/camera
+					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
+						regulator-name = "V-DISPLAY";
+						regulator-min-microvolt = <2500000>;
+						regulator-max-microvolt = <2900000>;
+						regulator-boot-on;
+						/* BUG: If turned off MMC will be affected. */
+						regulator-always-on;
+					};
+
+					// supplies to the on-board eMMC
+					ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
+						regulator-name = "V-eMMC1";
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					// supply for VAUX3; SDcard slots
+					ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
+						regulator-name = "V-MMC-SD";
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					// supply for v-intcore12; VINTCORE12 LDO
+					ab8500_ldo_initcore_reg: ab8500_ldo_initcore {
+						regulator-name = "V-INTCORE";
+					};
+
+					// supply for tvout; gpadc; TVOUT LDO
+					ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
+						regulator-name = "V-TVOUT";
+					};
+
+					// supply for ab8500-usb; USB LDO
+					ab8500_ldo_usb_reg: ab8500_ldo_usb {
+						regulator-name = "dummy";
+					};
+
+					// supply for ab8500-vaudio; VAUDIO LDO
+					ab8500_ldo_audio_reg: ab8500_ldo_audio {
+						regulator-name = "V-AUD";
+					};
+
+					// supply for v-anamic1 VAMic1-LDO
+					ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
+						regulator-name = "V-AMIC1";
+					};
+
+					// supply for v-amic2; VAMIC2 LDO; reuse constants for AMIC1
+					ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 {
+						regulator-name = "V-AMIC2";
+					};
+
+					// supply for v-dmic; VDMIC LDO
+					ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
+						regulator-name = "V-DMIC";
+					};
+
+					// supply for U8500 CSI/DSI; VANA LDO
+					ab8500_ldo_ana_reg: ab8500_ldo_ana {
+						regulator-name = "V-CSI/DSI";
+					};
+				};
 			};
 		};
 
 		i2c@80004000 {
-			compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c";
+			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
 			reg = <0x80004000 0x1000>;
 			interrupts = <0 21 0x4>;
 			#address-cells = <1>;
@@ -172,7 +392,7 @@
 		};
 
 		i2c@80122000 {
-			compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c";
+			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
 			reg = <0x80122000 0x1000>;
 			interrupts = <0 22 0x4>;
 			#address-cells = <1>;
@@ -180,7 +400,7 @@
 		};
 
 		i2c@80128000 {
-			compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c";
+			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
 			reg = <0x80128000 0x1000>;
 			interrupts = <0 55 0x4>;
 			#address-cells = <1>;
@@ -188,7 +408,7 @@
 		};
 
 		i2c@80110000 {
-			compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c";
+			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
 			reg = <0x80110000 0x1000>;
 			interrupts = <0 12 0x4>;
 			#address-cells = <1>;
@@ -196,7 +416,7 @@
 		};
 
 		i2c@8012a000 {
-			compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c";
+			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
 			reg = <0x8012a000 0x1000>;
 			interrupts = <0 51 0x4>;
 			#address-cells = <1>;
@@ -212,7 +432,8 @@
 			status = "disabled";
 
 			// Add one of these for each child device
-			cs-gpios = <&gpio0 31 &gpio4 14 &gpio4 16 &gpio6 22 &gpio7 0>;
+			cs-gpios = <&gpio0 31 0x4 &gpio4 14 0x4 &gpio4 16 0x4
+				    &gpio6 22 0x4 &gpio7 0 0x4>;
 
 		};
 
@@ -271,5 +492,14 @@
 			interrupts = <0 100 0x4>;
 			status = "disabled";
 		};
+
+		external-bus@50000000 {
+			compatible = "simple-bus";
+			reg = <0x50000000 0x4000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x50000000 0x4000000>;
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts
new file mode 100644
index 000000000000..297e3baba71c
--- /dev/null
+++ b/arch/arm/boot/dts/emev2-kzm9d.dts
@@ -0,0 +1,26 @@
+/*
+ * Device Tree Source for the KZM9D board
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+/dts-v1/;
+
+/include/ "emev2.dtsi"
+
+/ {
+	model = "EMEV2 KZM9D Board";
+	compatible = "renesas,kzm9d", "renesas,emev2";
+
+	memory {
+		device_type = "memory";
+		reg = <0x40000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS1,115200n81";
+	};
+};
diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi
new file mode 100644
index 000000000000..eb504a6c0f4a
--- /dev/null
+++ b/arch/arm/boot/dts/emev2.dtsi
@@ -0,0 +1,63 @@
+/*
+ * Device Tree Source for the EMEV2 SoC
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "renesas,emev2";
+	interrupt-parent = <&gic>;
+
+	cpus {
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+		};
+		cpu@1 {
+			compatible = "arm,cortex-a9";
+		};
+	};
+
+	gic: interrupt-controller@e0020000 {
+		compatible = "arm,cortex-a9-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		reg = <0xe0028000 0x1000>,
+		      <0xe0020000 0x0100>;
+	};
+
+	sti@e0180000 {
+		compatible = "renesas,em-sti";
+		reg = <0xe0180000 0x54>;
+		interrupts = <0 125 0>;
+	};
+
+	uart@e1020000 {
+		compatible = "renesas,em-uart";
+		reg = <0xe1020000 0x38>;
+		interrupts = <0 8 0>;
+	};
+
+	uart@e1030000 {
+		compatible = "renesas,em-uart";
+		reg = <0xe1030000 0x38>;
+		interrupts = <0 9 0>;
+	};
+
+	uart@e1040000 {
+		compatible = "renesas,em-uart";
+		reg = <0xe1040000 0x38>;
+		interrupts = <0 10 0>;
+	};
+
+	uart@e1050000 {
+		compatible = "renesas,em-uart";
+		reg = <0xe1050000 0x38>;
+		interrupts = <0 11 0>;
+	};
+};
diff --git a/arch/arm/boot/dts/ethernut5.dts b/arch/arm/boot/dts/ethernut5.dts
new file mode 100644
index 000000000000..1ea9d34460a4
--- /dev/null
+++ b/arch/arm/boot/dts/ethernut5.dts
@@ -0,0 +1,84 @@
+/*
+ * ethernut5.dts - Device Tree file for Ethernut 5 board
+ *
+ * Copyright (C) 2012 egnite GmbH <info@egnite.de>
+ *
+ * Licensed under GPLv2.
+ */
+/dts-v1/;
+/include/ "at91sam9260.dtsi"
+
+/ {
+	model = "Ethernut 5";
+	compatible = "egnite,ethernut5", "atmel,at91sam9260", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 root=/dev/mtdblock0 rw rootfstype=jffs2";
+	};
+
+	memory {
+		reg = <0x20000000 0x08000000>;
+	};
+
+	ahb {
+		apb {
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			usart0: serial@fffb0000 {
+				status = "okay";
+			};
+
+			usart1: serial@fffb4000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@fffc4000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			usb1: gadget@fffa4000 {
+				atmel,vbus-gpio = <&pioC 5 0>;
+				status = "okay";
+			};
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			nand-on-flash-bbt;
+			status = "okay";
+
+			gpios = <0
+				 &pioC 14 0
+				 0
+				>;
+
+			root@0 {
+				label = "root";
+				reg = <0x0 0x08000000>;
+			};
+
+			data@20000 {
+				label = "data";
+				reg = <0x08000000 0x38000000>;
+			};
+		};
+
+		usb0: ohci@00500000 {
+			num-ports = <2>;
+			status = "okay";
+		};
+	};
+
+	i2c@0 {
+		status = "okay";
+
+		pcf8563@50 {
+			compatible = "nxp,pcf8563";
+			reg = <0x51>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 399d17b231d2..49945cc1bc7d 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -23,4 +23,52 @@
 	chosen {
 		bootargs = "root=/dev/ram0 rw ramdisk=8192 console=ttySAC1,115200";
 	};
+
+	i2c@12C60000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <20000>;
+		gpios = <&gpb3 0 2 3 0>,
+			<&gpb3 1 2 3 0>;
+
+		eeprom@50 {
+			compatible = "samsung,s524ad0xd1";
+			reg = <0x50>;
+		};
+	};
+
+	i2c@12C70000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <20000>;
+		gpios = <&gpb3 2 2 3 0>,
+			<&gpb3 3 2 3 0>;
+
+		eeprom@51 {
+			compatible = "samsung,s524ad0xd1";
+			reg = <0x51>;
+		};
+	};
+
+	i2c@12C80000 {
+		status = "disabled";
+	};
+
+	i2c@12C90000 {
+		status = "disabled";
+	};
+
+	i2c@12CA0000 {
+		status = "disabled";
+	};
+
+	i2c@12CB0000 {
+		status = "disabled";
+	};
+
+	i2c@12CC0000 {
+		status = "disabled";
+	};
+
+	i2c@12CD0000 {
+		status = "disabled";
+	};
 };
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index dfc433599436..4272b2949228 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -23,11 +23,27 @@
 	compatible = "samsung,exynos5250";
 	interrupt-parent = <&gic>;
 
-	gic:interrupt-controller@10490000 {
+	gic:interrupt-controller@10481000 {
 		compatible = "arm,cortex-a9-gic";
 		#interrupt-cells = <3>;
 		interrupt-controller;
-		reg = <0x10490000 0x1000>, <0x10480000 0x100>;
+		reg = <0x10481000 0x1000>, <0x10482000 0x2000>;
+	};
+
+	combiner:interrupt-controller@10440000 {
+		compatible = "samsung,exynos4210-combiner";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		samsung,combiner-nr = <32>;
+		reg = <0x10440000 0x1000>;
+		interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
+			     <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
+			     <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
+			     <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
+			     <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
+			     <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
+			     <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
+			     <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
 	};
 
 	watchdog {
@@ -42,30 +58,6 @@
 		interrupts = <0 43 0>, <0 44 0>;
 	};
 
-	sdhci@12200000 {
-		compatible = "samsung,exynos4210-sdhci";
-		reg = <0x12200000 0x100>;
-		interrupts = <0 75 0>;
-	};
-
-	sdhci@12210000 {
-		compatible = "samsung,exynos4210-sdhci";
-		reg = <0x12210000 0x100>;
-		interrupts = <0 76 0>;
-	};
-
-	sdhci@12220000 {
-		compatible = "samsung,exynos4210-sdhci";
-		reg = <0x12220000 0x100>;
-		interrupts = <0 77 0>;
-	};
-
-	sdhci@12230000 {
-		compatible = "samsung,exynos4210-sdhci";
-		reg = <0x12230000 0x100>;
-		interrupts = <0 78 0>;
-	};
-
 	serial@12C00000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x12C00000 0x100>;
@@ -94,48 +86,64 @@
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x12C60000 0x100>;
 		interrupts = <0 56 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 	};
 
 	i2c@12C70000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x12C70000 0x100>;
 		interrupts = <0 57 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 	};
 
 	i2c@12C80000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x12C80000 0x100>;
 		interrupts = <0 58 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 	};
 
 	i2c@12C90000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x12C90000 0x100>;
 		interrupts = <0 59 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 	};
 
 	i2c@12CA0000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x12CA0000 0x100>;
 		interrupts = <0 60 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 	};
 
 	i2c@12CB0000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x12CB0000 0x100>;
 		interrupts = <0 61 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 	};
 
 	i2c@12CC0000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x12CC0000 0x100>;
 		interrupts = <0 62 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 	};
 
 	i2c@12CD0000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x12CD0000 0x100>;
 		interrupts = <0 63 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 	};
 
 	amba {
@@ -157,13 +165,13 @@
 			interrupts = <0 35 0>;
 		};
 
-		mdma0: pdma@10800000 {
+		mdma0: mdma@10800000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x10800000 0x1000>;
 			interrupts = <0 33 0>;
 		};
 
-		mdma1: pdma@11C10000 {
+		mdma1: mdma@11C10000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x11C10000 0x1000>;
 			interrupts = <0 124 0>;
@@ -242,6 +250,12 @@
 			#gpio-cells = <4>;
 		};
 
+		gpc4: gpio-controller@114002E0 {
+			compatible = "samsung,exynos4-gpio";
+			reg = <0x114002E0 0x20>;
+			#gpio-cells = <4>;
+		};
+
 		gpd0: gpio-controller@11400160 {
 			compatible = "samsung,exynos4-gpio";
 			reg = <0x11400160 0x20>;
@@ -388,19 +402,19 @@
 
 		gpv2: gpio-controller@10D10040 {
 			compatible = "samsung,exynos4-gpio";
-			reg = <0x10D10040 0x20>;
+			reg = <0x10D10060 0x20>;
 			#gpio-cells = <4>;
 		};
 
 		gpv3: gpio-controller@10D10060 {
 			compatible = "samsung,exynos4-gpio";
-			reg = <0x10D10060 0x20>;
+			reg = <0x10D10080 0x20>;
 			#gpio-cells = <4>;
 		};
 
 		gpv4: gpio-controller@10D10080 {
 			compatible = "samsung,exynos4-gpio";
-			reg = <0x10D10080 0x20>;
+			reg = <0x10D100C0 0x20>;
 			#gpio-cells = <4>;
 		};
 
diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts
index 37c0ff9c8b90..83e72294aefb 100644
--- a/arch/arm/boot/dts/highbank.dts
+++ b/arch/arm/boot/dts/highbank.dts
@@ -89,7 +89,6 @@
 			#size-cells = <0>;
 			#address-cells = <1>;
 			interrupt-controller;
-			interrupt-parent;
 			reg = <0xfff11000 0x1000>,
 			      <0xfff10100 0x100>;
 		};
diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts
new file mode 100644
index 000000000000..70bffa929b65
--- /dev/null
+++ b/arch/arm/boot/dts/imx23-evk.dts
@@ -0,0 +1,43 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx23.dtsi"
+
+/ {
+	model = "Freescale i.MX23 Evaluation Kit";
+	compatible = "fsl,imx23-evk", "fsl,imx23";
+
+	memory {
+		reg = <0x40000000 0x08000000>;
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			ssp0: ssp@80010000 {
+				compatible = "fsl,imx23-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_8bit_pins_a &mmc0_pins_fixup>;
+				bus-width = <8>;
+				wp-gpios = <&gpio1 30 0>;
+				status = "okay";
+			};
+		};
+
+		apbx@80040000 {
+			duart: serial@80070000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_a>;
+				status = "okay";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
new file mode 100644
index 000000000000..8c5f9994f3fc
--- /dev/null
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -0,0 +1,295 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	interrupt-parent = <&icoll>;
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+	};
+
+	cpus {
+		cpu@0 {
+			compatible = "arm,arm926ejs";
+		};
+	};
+
+	apb@80000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x80000000 0x80000>;
+		ranges;
+
+		apbh@80000000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x80000000 0x40000>;
+			ranges;
+
+			icoll: interrupt-controller@80000000 {
+				compatible = "fsl,imx23-icoll", "fsl,mxs-icoll";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x80000000 0x2000>;
+			};
+
+			dma-apbh@80004000 {
+				compatible = "fsl,imx23-dma-apbh";
+				reg = <0x80004000 2000>;
+			};
+
+			ecc@80008000 {
+				reg = <0x80008000 2000>;
+				status = "disabled";
+			};
+
+			bch@8000a000 {
+				reg = <0x8000a000 2000>;
+				status = "disabled";
+			};
+
+			gpmi@8000c000 {
+				reg = <0x8000c000 2000>;
+				status = "disabled";
+			};
+
+			ssp0: ssp@80010000 {
+				reg = <0x80010000 2000>;
+				interrupts = <15 14>;
+				fsl,ssp-dma-channel = <1>;
+				status = "disabled";
+			};
+
+			etm@80014000 {
+				reg = <0x80014000 2000>;
+				status = "disabled";
+			};
+
+			pinctrl@80018000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx23-pinctrl", "simple-bus";
+				reg = <0x80018000 2000>;
+
+				gpio0: gpio@0 {
+					compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
+					interrupts = <16>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio1: gpio@1 {
+					compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
+					interrupts = <17>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio2: gpio@2 {
+					compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
+					interrupts = <18>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				duart_pins_a: duart@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <0x11a2 0x11b2>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
+				mmc0_8bit_pins_a: mmc0-8bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <0x2020 0x2030 0x2040
+						0x2050 0x0082 0x0092 0x00a2
+						0x00b2 0x2000 0x2010 0x2060>;
+					fsl,drive-strength = <1>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <1>;
+				};
+
+				mmc0_pins_fixup: mmc0-pins-fixup {
+					fsl,pinmux-ids = <0x2010 0x2060>;
+					fsl,pull-up = <0>;
+				};
+			};
+
+			digctl@8001c000 {
+				reg = <0x8001c000 2000>;
+				status = "disabled";
+			};
+
+			emi@80020000 {
+				reg = <0x80020000 2000>;
+				status = "disabled";
+			};
+
+			dma-apbx@80024000 {
+				compatible = "fsl,imx23-dma-apbx";
+				reg = <0x80024000 2000>;
+			};
+
+			dcp@80028000 {
+				reg = <0x80028000 2000>;
+				status = "disabled";
+			};
+
+			pxp@8002a000 {
+				reg = <0x8002a000 2000>;
+				status = "disabled";
+			};
+
+			ocotp@8002c000 {
+				reg = <0x8002c000 2000>;
+				status = "disabled";
+			};
+
+			axi-ahb@8002e000 {
+				reg = <0x8002e000 2000>;
+				status = "disabled";
+			};
+
+			lcdif@80030000 {
+				reg = <0x80030000 2000>;
+				status = "disabled";
+			};
+
+			ssp1: ssp@80034000 {
+				reg = <0x80034000 2000>;
+				interrupts = <2 20>;
+				fsl,ssp-dma-channel = <2>;
+				status = "disabled";
+			};
+
+			tvenc@80038000 {
+				reg = <0x80038000 2000>;
+				status = "disabled";
+			};
+                };
+
+		apbx@80040000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x80040000 0x40000>;
+			ranges;
+
+			clkctl@80040000 {
+				reg = <0x80040000 2000>;
+				status = "disabled";
+			};
+
+			saif0: saif@80042000 {
+				reg = <0x80042000 2000>;
+				status = "disabled";
+			};
+
+			power@80044000 {
+				reg = <0x80044000 2000>;
+				status = "disabled";
+			};
+
+			saif1: saif@80046000 {
+				reg = <0x80046000 2000>;
+				status = "disabled";
+			};
+
+			audio-out@80048000 {
+				reg = <0x80048000 2000>;
+				status = "disabled";
+			};
+
+			audio-in@8004c000 {
+				reg = <0x8004c000 2000>;
+				status = "disabled";
+			};
+
+			lradc@80050000 {
+				reg = <0x80050000 2000>;
+				status = "disabled";
+			};
+
+			spdif@80054000 {
+				reg = <0x80054000 2000>;
+				status = "disabled";
+			};
+
+			i2c@80058000 {
+				reg = <0x80058000 2000>;
+				status = "disabled";
+			};
+
+			rtc@8005c000 {
+				reg = <0x8005c000 2000>;
+				status = "disabled";
+			};
+
+			pwm@80064000 {
+				reg = <0x80064000 2000>;
+				status = "disabled";
+			};
+
+			timrot@80068000 {
+				reg = <0x80068000 2000>;
+				status = "disabled";
+			};
+
+			auart0: serial@8006c000 {
+				reg = <0x8006c000 0x2000>;
+				status = "disabled";
+			};
+
+			auart1: serial@8006e000 {
+				reg = <0x8006e000 0x2000>;
+				status = "disabled";
+			};
+
+			duart: serial@80070000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x80070000 0x2000>;
+				interrupts = <0>;
+				status = "disabled";
+			};
+
+			usbphy@8007c000 {
+				reg = <0x8007c000 0x2000>;
+				status = "disabled";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x80080000 0x80000>;
+		ranges;
+
+		usbctrl@80080000 {
+			reg = <0x80080000 0x10000>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx27-phytec-phycore.dts b/arch/arm/boot/dts/imx27-phytec-phycore.dts
index a51a08fc2af9..2b0ff60247a4 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycore.dts
+++ b/arch/arm/boot/dts/imx27-phytec-phycore.dts
@@ -27,22 +27,22 @@
 				status = "okay";
 			};
 
-			uart@1000a000 {
+			serial@1000a000 {
 				fsl,uart-has-rtscts;
 				status = "okay";
 			};
 
-			uart@1000b000 {
+			serial@1000b000 {
 				fsl,uart-has-rtscts;
 				status = "okay";
 			};
 
-			uart@1000c000 {
+			serial@1000c000 {
 				fsl,uart-has-rtscts;
 				status = "okay";
 			};
 
-			fec@1002b000 {
+			ethernet@1002b000 {
 				status = "okay";
 			};
 
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index bc5e7d5ddd54..2b1a166d41f9 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -59,28 +59,28 @@
 				status = "disabled";
 			};
 
-			uart1: uart@1000a000 {
+			uart1: serial@1000a000 {
 				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
 				reg = <0x1000a000 0x1000>;
 				interrupts = <20>;
 				status = "disabled";
 			};
 
-			uart2: uart@1000b000 {
+			uart2: serial@1000b000 {
 				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
 				reg = <0x1000b000 0x1000>;
 				interrupts = <19>;
 				status = "disabled";
 			};
 
-			uart3: uart@1000c000 {
+			uart3: serial@1000c000 {
 				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
 				reg = <0x1000c000 0x1000>;
 				interrupts = <18>;
 				status = "disabled";
 			};
 
-			uart4: uart@1000d000 {
+			uart4: serial@1000d000 {
 				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
 				reg = <0x1000d000 0x1000>;
 				interrupts = <17>;
@@ -183,14 +183,14 @@
 				status = "disabled";
 			};
 
-			uart5: uart@1001b000 {
+			uart5: serial@1001b000 {
 				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
 				reg = <0x1001b000 0x1000>;
 				interrupts = <49>;
 				status = "disabled";
 			};
 
-			uart6: uart@1001c000 {
+			uart6: serial@1001c000 {
 				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
 				reg = <0x1001c000 0x1000>;
 				interrupts = <48>;
@@ -206,7 +206,7 @@
 				status = "disabled";
 			};
 
-			fec: fec@1002b000 {
+			fec: ethernet@1002b000 {
 				compatible = "fsl,imx27-fec";
 				reg = <0x1002b000 0x4000>;
 				interrupts = <50>;
diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts
new file mode 100644
index 000000000000..ee520a529cb4
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-evk.dts
@@ -0,0 +1,114 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx28.dtsi"
+
+/ {
+	model = "Freescale i.MX28 Evaluation Kit";
+	compatible = "fsl,imx28-evk", "fsl,imx28";
+
+	memory {
+		reg = <0x40000000 0x08000000>;
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			ssp0: ssp@80010000 {
+				compatible = "fsl,imx28-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_8bit_pins_a
+					&mmc0_cd_cfg &mmc0_sck_cfg>;
+				bus-width = <8>;
+				wp-gpios = <&gpio2 12 0>;
+				status = "okay";
+			};
+
+			ssp1: ssp@80012000 {
+				compatible = "fsl,imx28-mmc";
+				bus-width = <8>;
+				wp-gpios = <&gpio0 28 0>;
+				status = "okay";
+			};
+		};
+
+		apbx@80040000 {
+			saif0: saif@80042000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&saif0_pins_a>;
+				status = "okay";
+			};
+
+			saif1: saif@80046000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&saif1_pins_a>;
+				fsl,saif-master = <&saif0>;
+				status = "okay";
+			};
+
+			i2c0: i2c@80058000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c0_pins_a>;
+				status = "okay";
+
+				sgtl5000: codec@0a {
+					compatible = "fsl,sgtl5000";
+					reg = <0x0a>;
+					VDDA-supply = <&reg_3p3v>;
+					VDDIO-supply = <&reg_3p3v>;
+
+				};
+			};
+
+			duart: serial@80074000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_a>;
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		mac0: ethernet@800f0000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac0_pins_a>;
+			status = "okay";
+		};
+
+		mac1: ethernet@800f4000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac1_pins_a>;
+			status = "okay";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		reg_3p3v: 3p3v {
+			compatible = "regulator-fixed";
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx28-evk-sgtl5000",
+			     "fsl,mxs-audio-sgtl5000";
+		model = "imx28-evk-sgtl5000";
+		saif-controllers = <&saif0 &saif1>;
+		audio-codec = <&sgtl5000>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
new file mode 100644
index 000000000000..4634cb861a59
--- /dev/null
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -0,0 +1,497 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	interrupt-parent = <&icoll>;
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		gpio4 = &gpio4;
+		saif0 = &saif0;
+		saif1 = &saif1;
+	};
+
+	cpus {
+		cpu@0 {
+			compatible = "arm,arm926ejs";
+		};
+	};
+
+	apb@80000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x80000000 0x80000>;
+		ranges;
+
+		apbh@80000000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x80000000 0x3c900>;
+			ranges;
+
+			icoll: interrupt-controller@80000000 {
+				compatible = "fsl,imx28-icoll", "fsl,mxs-icoll";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x80000000 0x2000>;
+			};
+
+			hsadc@80002000 {
+				reg = <0x80002000 2000>;
+				interrupts = <13 87>;
+				status = "disabled";
+			};
+
+			dma-apbh@80004000 {
+				compatible = "fsl,imx28-dma-apbh";
+				reg = <0x80004000 2000>;
+			};
+
+			perfmon@80006000 {
+				reg = <0x80006000 800>;
+				interrupts = <27>;
+				status = "disabled";
+			};
+
+			bch@8000a000 {
+				reg = <0x8000a000 2000>;
+				interrupts = <41>;
+				status = "disabled";
+			};
+
+			gpmi@8000c000 {
+				reg = <0x8000c000 2000>;
+				interrupts = <42 88>;
+				status = "disabled";
+			};
+
+			ssp0: ssp@80010000 {
+				reg = <0x80010000 2000>;
+				interrupts = <96 82>;
+				fsl,ssp-dma-channel = <0>;
+				status = "disabled";
+			};
+
+			ssp1: ssp@80012000 {
+				reg = <0x80012000 2000>;
+				interrupts = <97 83>;
+				fsl,ssp-dma-channel = <1>;
+				status = "disabled";
+			};
+
+			ssp2: ssp@80014000 {
+				reg = <0x80014000 2000>;
+				interrupts = <98 84>;
+				fsl,ssp-dma-channel = <2>;
+				status = "disabled";
+			};
+
+			ssp3: ssp@80016000 {
+				reg = <0x80016000 2000>;
+				interrupts = <99 85>;
+				fsl,ssp-dma-channel = <3>;
+				status = "disabled";
+			};
+
+			pinctrl@80018000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx28-pinctrl", "simple-bus";
+				reg = <0x80018000 2000>;
+
+				gpio0: gpio@0 {
+					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					interrupts = <127>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio1: gpio@1 {
+					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					interrupts = <126>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio2: gpio@2 {
+					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					interrupts = <125>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio3: gpio@3 {
+					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					interrupts = <124>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio4: gpio@4 {
+					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					interrupts = <123>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				duart_pins_a: duart@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <0x3102 0x3112>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
+				mac0_pins_a: mac0@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <0x4000 0x4010 0x4020
+						0x4030 0x4040 0x4060 0x4070
+						0x4080 0x4100>;
+					fsl,drive-strength = <1>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <1>;
+				};
+
+				mac1_pins_a: mac1@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <0x40f1 0x4091 0x40a1
+						0x40e1 0x40b1 0x40c1>;
+					fsl,drive-strength = <1>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <1>;
+				};
+
+				mmc0_8bit_pins_a: mmc0-8bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <0x2000 0x2010 0x2020
+						0x2030 0x2040 0x2050 0x2060
+						0x2070 0x2080 0x2090 0x20a0>;
+					fsl,drive-strength = <1>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <1>;
+				};
+
+				mmc0_cd_cfg: mmc0-cd-cfg {
+					fsl,pinmux-ids = <0x2090>;
+					fsl,pull-up = <0>;
+				};
+
+				mmc0_sck_cfg: mmc0-sck-cfg {
+					fsl,pinmux-ids = <0x20a0>;
+					fsl,drive-strength = <2>;
+					fsl,pull-up = <0>;
+				};
+
+				i2c0_pins_a: i2c0@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <0x3180 0x3190>;
+					fsl,drive-strength = <1>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <1>;
+				};
+
+				saif0_pins_a: saif0@0 {
+					reg = <0>;
+					fsl,pinmux-ids =
+						<0x3140 0x3150 0x3160 0x3170>;
+					fsl,drive-strength = <2>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <1>;
+				};
+
+				saif1_pins_a: saif1@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <0x31a0>;
+					fsl,drive-strength = <2>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <1>;
+				};
+			};
+
+			digctl@8001c000 {
+				reg = <0x8001c000 2000>;
+				interrupts = <89>;
+				status = "disabled";
+			};
+
+			etm@80022000 {
+				reg = <0x80022000 2000>;
+				status = "disabled";
+			};
+
+			dma-apbx@80024000 {
+				compatible = "fsl,imx28-dma-apbx";
+				reg = <0x80024000 2000>;
+			};
+
+			dcp@80028000 {
+				reg = <0x80028000 2000>;
+				interrupts = <52 53 54>;
+				status = "disabled";
+			};
+
+			pxp@8002a000 {
+				reg = <0x8002a000 2000>;
+				interrupts = <39>;
+				status = "disabled";
+			};
+
+			ocotp@8002c000 {
+				reg = <0x8002c000 2000>;
+				status = "disabled";
+			};
+
+			axi-ahb@8002e000 {
+				reg = <0x8002e000 2000>;
+				status = "disabled";
+			};
+
+			lcdif@80030000 {
+				reg = <0x80030000 2000>;
+				interrupts = <38 86>;
+				status = "disabled";
+			};
+
+			can0: can@80032000 {
+				reg = <0x80032000 2000>;
+				interrupts = <8>;
+				status = "disabled";
+			};
+
+			can1: can@80034000 {
+				reg = <0x80034000 2000>;
+				interrupts = <9>;
+				status = "disabled";
+			};
+
+			simdbg@8003c000 {
+				reg = <0x8003c000 200>;
+				status = "disabled";
+			};
+
+			simgpmisel@8003c200 {
+				reg = <0x8003c200 100>;
+				status = "disabled";
+			};
+
+			simsspsel@8003c300 {
+				reg = <0x8003c300 100>;
+				status = "disabled";
+			};
+
+			simmemsel@8003c400 {
+				reg = <0x8003c400 100>;
+				status = "disabled";
+			};
+
+			gpiomon@8003c500 {
+				reg = <0x8003c500 100>;
+				status = "disabled";
+			};
+
+			simenet@8003c700 {
+				reg = <0x8003c700 100>;
+				status = "disabled";
+			};
+
+			armjtag@8003c800 {
+				reg = <0x8003c800 100>;
+				status = "disabled";
+			};
+                };
+
+		apbx@80040000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x80040000 0x40000>;
+			ranges;
+
+			clkctl@80040000 {
+				reg = <0x80040000 2000>;
+				status = "disabled";
+			};
+
+			saif0: saif@80042000 {
+				compatible = "fsl,imx28-saif";
+				reg = <0x80042000 2000>;
+				interrupts = <59 80>;
+				fsl,saif-dma-channel = <4>;
+				status = "disabled";
+			};
+
+			power@80044000 {
+				reg = <0x80044000 2000>;
+				status = "disabled";
+			};
+
+			saif1: saif@80046000 {
+				compatible = "fsl,imx28-saif";
+				reg = <0x80046000 2000>;
+				interrupts = <58 81>;
+				fsl,saif-dma-channel = <5>;
+				status = "disabled";
+			};
+
+			lradc@80050000 {
+				reg = <0x80050000 2000>;
+				status = "disabled";
+			};
+
+			spdif@80054000 {
+				reg = <0x80054000 2000>;
+				interrupts = <45 66>;
+				status = "disabled";
+			};
+
+			rtc@80056000 {
+				reg = <0x80056000 2000>;
+				interrupts = <28 29>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@80058000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx28-i2c";
+				reg = <0x80058000 2000>;
+				interrupts = <111 68>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@8005a000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx28-i2c";
+				reg = <0x8005a000 2000>;
+				interrupts = <110 69>;
+				status = "disabled";
+			};
+
+			pwm@80064000 {
+				reg = <0x80064000 2000>;
+				status = "disabled";
+			};
+
+			timrot@80068000 {
+				reg = <0x80068000 2000>;
+				status = "disabled";
+			};
+
+			auart0: serial@8006a000 {
+				reg = <0x8006a000 0x2000>;
+				interrupts = <112 70 71>;
+				status = "disabled";
+			};
+
+			auart1: serial@8006c000 {
+				reg = <0x8006c000 0x2000>;
+				interrupts = <113 72 73>;
+				status = "disabled";
+			};
+
+			auart2: serial@8006e000 {
+				reg = <0x8006e000 0x2000>;
+				interrupts = <114 74 75>;
+				status = "disabled";
+			};
+
+			auart3: serial@80070000 {
+				reg = <0x80070000 0x2000>;
+				interrupts = <115 76 77>;
+				status = "disabled";
+			};
+
+			auart4: serial@80072000 {
+				reg = <0x80072000 0x2000>;
+				interrupts = <116 78 79>;
+				status = "disabled";
+			};
+
+			duart: serial@80074000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x80074000 0x1000>;
+				interrupts = <47>;
+				status = "disabled";
+			};
+
+			usbphy0: usbphy@8007c000 {
+				reg = <0x8007c000 0x2000>;
+				status = "disabled";
+			};
+
+			usbphy1: usbphy@8007e000 {
+				reg = <0x8007e000 0x2000>;
+				status = "disabled";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x80080000 0x80000>;
+		ranges;
+
+		usbctrl0: usbctrl@80080000 {
+			reg = <0x80080000 0x10000>;
+			status = "disabled";
+		};
+
+		usbctrl1: usbctrl@80090000 {
+			reg = <0x80090000 0x10000>;
+			status = "disabled";
+		};
+
+		dflpt@800c0000 {
+			reg = <0x800c0000 0x10000>;
+			status = "disabled";
+		};
+
+		mac0: ethernet@800f0000 {
+			compatible = "fsl,imx28-fec";
+			reg = <0x800f0000 0x4000>;
+			interrupts = <101>;
+			status = "disabled";
+		};
+
+		mac1: ethernet@800f4000 {
+			compatible = "fsl,imx28-fec";
+			reg = <0x800f4000 0x4000>;
+			interrupts = <102>;
+			status = "disabled";
+		};
+
+		switch@800f8000 {
+			reg = <0x800f8000 0x8000>;
+			status = "disabled";
+		};
+
+	};
+};
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index 9949e6060dee..de065b5976e6 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -17,10 +17,6 @@
 	model = "Freescale i.MX51 Babbage Board";
 	compatible = "fsl,imx51-babbage", "fsl,imx51";
 
-	chosen {
-		bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait";
-	};
-
 	memory {
 		reg = <0x90000000 0x20000000>;
 	};
@@ -40,7 +36,7 @@
 					status = "okay";
 				};
 
-				uart3: uart@7000c000 {
+				uart3: serial@7000c000 {
 					fsl,uart-has-rtscts;
 					status = "okay";
 				};
@@ -166,6 +162,11 @@
 						};
 					};
 				};
+
+				ssi2: ssi@70014000 {
+					fsl,mode = "i2s-slave";
+					status = "okay";
+				};
 			};
 
 			wdog@73f98000 { /* WDOG1 */
@@ -177,12 +178,12 @@
 				reg = <0x73fa8000 0x4000>;
 			};
 
-			uart1: uart@73fbc000 {
+			uart1: serial@73fbc000 {
 				fsl,uart-has-rtscts;
 				status = "okay";
 			};
 
-			uart2: uart@73fc0000 {
+			uart2: serial@73fc0000 {
 				status = "okay";
 			};
 		};
@@ -195,13 +196,20 @@
 			i2c@83fc4000 { /* I2C2 */
 				status = "okay";
 
-				codec: sgtl5000@0a {
+				sgtl5000: codec@0a {
 					compatible = "fsl,sgtl5000";
 					reg = <0x0a>;
+					clock-frequency = <26000000>;
+					VDDA-supply = <&vdig_reg>;
+					VDDIO-supply = <&vvideo_reg>;
 				};
 			};
 
-			fec@83fec000 {
+			audmux@83fd0000 {
+				status = "okay";
+			};
+
+			ethernet@83fec000 {
 				phy-mode = "mii";
 				status = "okay";
 			};
@@ -218,4 +226,18 @@
 			gpio-key,wakeup;
 		};
 	};
+
+	sound {
+		compatible = "fsl,imx51-babbage-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx51-babbage-sgtl5000";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <2>;
+		mux-ext-port = <3>;
+	};
 };
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index 6663986fe1c8..bfa65abe8ef2 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -86,7 +86,7 @@
 					status = "disabled";
 				};
 
-				uart3: uart@7000c000 {
+				uart3: serial@7000c000 {
 					compatible = "fsl,imx51-uart", "fsl,imx21-uart";
 					reg = <0x7000c000 0x4000>;
 					interrupts = <33>;
@@ -102,6 +102,15 @@
 					status = "disabled";
 				};
 
+				ssi2: ssi@70014000 {
+					compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
+					reg = <0x70014000 0x4000>;
+					interrupts = <30>;
+					fsl,fifo-depth = <15>;
+					fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */
+					status = "disabled";
+				};
+
 				esdhc@70020000 { /* ESDHC3 */
 					compatible = "fsl,imx51-esdhc";
 					reg = <0x70020000 0x4000>;
@@ -171,14 +180,14 @@
 				status = "disabled";
 			};
 
-			uart1: uart@73fbc000 {
+			uart1: serial@73fbc000 {
 				compatible = "fsl,imx51-uart", "fsl,imx21-uart";
 				reg = <0x73fbc000 0x4000>;
 				interrupts = <31>;
 				status = "disabled";
 			};
 
-			uart2: uart@73fc0000 {
+			uart2: serial@73fc0000 {
 				compatible = "fsl,imx51-uart", "fsl,imx21-uart";
 				reg = <0x73fc0000 0x4000>;
 				interrupts = <32>;
@@ -235,7 +244,31 @@
 				status = "disabled";
 			};
 
-			fec@83fec000 {
+			ssi1: ssi@83fcc000 {
+				compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
+				reg = <0x83fcc000 0x4000>;
+				interrupts = <29>;
+				fsl,fifo-depth = <15>;
+				fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */
+				status = "disabled";
+			};
+
+			audmux@83fd0000 {
+				compatible = "fsl,imx51-audmux", "fsl,imx31-audmux";
+				reg = <0x83fd0000 0x4000>;
+				status = "disabled";
+			};
+
+			ssi3: ssi@83fe8000 {
+				compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
+				reg = <0x83fe8000 0x4000>;
+				interrupts = <96>;
+				fsl,fifo-depth = <15>;
+				fsl,ssi-dma-events = <47 46 37 35>; /* TX0 RX0 TX1 RX1 */
+				status = "disabled";
+			};
+
+			ethernet@83fec000 {
 				compatible = "fsl,imx51-fec", "fsl,imx27-fec";
 				reg = <0x83fec000 0x4000>;
 				interrupts = <87>;
diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts
index 2dccce46ed81..5b8eafcdbeec 100644
--- a/arch/arm/boot/dts/imx53-ard.dts
+++ b/arch/arm/boot/dts/imx53-ard.dts
@@ -17,10 +17,6 @@
 	model = "Freescale i.MX53 Automotive Reference Design Board";
 	compatible = "fsl,imx53-ard", "fsl,imx53";
 
-	chosen {
-		bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait";
-	};
-
 	memory {
 		reg = <0x70000000 0x40000000>;
 	};
@@ -44,7 +40,7 @@
 				reg = <0x53fa8000 0x4000>;
 			};
 
-			uart1: uart@53fbc000 {
+			uart1: serial@53fbc000 {
 				status = "okay";
 			};
 		};
diff --git a/arch/arm/boot/dts/imx53-evk.dts b/arch/arm/boot/dts/imx53-evk.dts
index 5bac4aa4800b..9c798034675e 100644
--- a/arch/arm/boot/dts/imx53-evk.dts
+++ b/arch/arm/boot/dts/imx53-evk.dts
@@ -17,10 +17,6 @@
 	model = "Freescale i.MX53 Evaluation Kit";
 	compatible = "fsl,imx53-evk", "fsl,imx53";
 
-	chosen {
-		bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait";
-	};
-
 	memory {
 		reg = <0x70000000 0x80000000>;
 	};
@@ -75,7 +71,7 @@
 				reg = <0x53fa8000 0x4000>;
 			};
 
-			uart1: uart@53fbc000 {
+			uart1: serial@53fbc000 {
 				status = "okay";
 			};
 		};
@@ -99,7 +95,7 @@
 				};
 			};
 
-			fec@63fec000 {
+			ethernet@63fec000 {
 				phy-mode = "rmii";
 				phy-reset-gpios = <&gpio7 6 0>;
 				status = "okay";
diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts
index 5c57c8672c36..2d803a9a6949 100644
--- a/arch/arm/boot/dts/imx53-qsb.dts
+++ b/arch/arm/boot/dts/imx53-qsb.dts
@@ -17,10 +17,6 @@
 	model = "Freescale i.MX53 Quick Start Board";
 	compatible = "fsl,imx53-qsb", "fsl,imx53";
 
-	chosen {
-		bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait";
-	};
-
 	memory {
 		reg = <0x70000000 0x40000000>;
 	};
@@ -33,6 +29,11 @@
 					status = "okay";
 				};
 
+				ssi2: ssi@50014000 {
+					fsl,mode = "i2s-slave";
+					status = "okay";
+				};
+
 				esdhc@50020000 { /* ESDHC3 */
 					cd-gpios = <&gpio3 11 0>;
 					wp-gpios = <&gpio3 12 0>;
@@ -49,7 +50,7 @@
 				reg = <0x53fa8000 0x4000>;
 			};
 
-			uart1: uart@53fbc000 {
+			uart1: serial@53fbc000 {
 				status = "okay";
 			};
 		};
@@ -62,9 +63,11 @@
 			i2c@63fc4000 { /* I2C2 */
 				status = "okay";
 
-				codec: sgtl5000@0a {
+				sgtl5000: codec@0a {
 					compatible = "fsl,sgtl5000";
 					reg = <0x0a>;
+					VDDA-supply = <&reg_3p2v>;
+					VDDIO-supply = <&reg_3p2v>;
 				};
 			};
 
@@ -77,12 +80,88 @@
 				};
 
 				pmic: dialog@48 {
-					compatible = "dialog,da9053", "dialog,da9052";
+					compatible = "dlg,da9053-aa", "dlg,da9052";
 					reg = <0x48>;
+
+					regulators {
+						buck0 {
+							regulator-min-microvolt = <500000>;
+							regulator-max-microvolt = <2075000>;
+						};
+
+						buck1 {
+							regulator-min-microvolt = <500000>;
+							regulator-max-microvolt = <2075000>;
+						};
+
+						buck2 {
+							regulator-min-microvolt = <925000>;
+					                regulator-max-microvolt = <2500000>;
+						};
+
+						buck3 {
+							regulator-min-microvolt = <925000>;
+					                regulator-max-microvolt = <2500000>;
+						};
+
+						ldo4 {
+							regulator-min-microvolt = <600000>;
+							regulator-max-microvolt = <1800000>;
+						};
+
+						ldo5 {
+							regulator-min-microvolt = <600000>;
+					                regulator-max-microvolt = <1800000>;
+						};
+
+						ldo6 {
+							regulator-min-microvolt = <1725000>;
+					                regulator-max-microvolt = <3300000>;
+						};
+
+						ldo7 {
+							regulator-min-microvolt = <1725000>;
+					                regulator-max-microvolt = <3300000>;
+						};
+
+						ldo8 {
+							regulator-min-microvolt = <1200000>;
+					                regulator-max-microvolt = <3600000>;
+						};
+
+						ldo9 {
+							regulator-min-microvolt = <1200000>;
+					                regulator-max-microvolt = <3600000>;
+						};
+
+						ldo10 {
+							regulator-min-microvolt = <1200000>;
+					                regulator-max-microvolt = <3600000>;
+						};
+
+						ldo11 {
+							regulator-min-microvolt = <1200000>;
+					                regulator-max-microvolt = <3600000>;
+						};
+
+						ldo12 {
+							regulator-min-microvolt = <1250000>;
+					                regulator-max-microvolt = <3650000>;
+						};
+
+						ldo13 {
+							regulator-min-microvolt = <1200000>;
+					                regulator-max-microvolt = <3600000>;
+						};
+					};
 				};
 			};
 
-			fec@63fec000 {
+			audmux@63fd0000 {
+				status = "okay";
+			};
+
+			ethernet@63fec000 {
 				phy-mode = "rmii";
 				phy-reset-gpios = <&gpio7 6 0>;
 				status = "okay";
@@ -122,4 +201,30 @@
 			linux,default-trigger = "heartbeat";
 		};
 	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		reg_3p2v: 3p2v {
+			compatible = "regulator-fixed";
+			regulator-name = "3P2V";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-always-on;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx53-qsb-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx53-qsb-sgtl5000";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <2>;
+		mux-ext-port = <5>;
+	};
 };
diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts
index c7ee86c2dfb5..08091029168e 100644
--- a/arch/arm/boot/dts/imx53-smd.dts
+++ b/arch/arm/boot/dts/imx53-smd.dts
@@ -17,10 +17,6 @@
 	model = "Freescale i.MX53 Smart Mobile Reference Design Board";
 	compatible = "fsl,imx53-smd", "fsl,imx53";
 
-	chosen {
-		bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait";
-	};
-
 	memory {
 		reg = <0x70000000 0x40000000>;
 	};
@@ -35,11 +31,11 @@
 				};
 
 				esdhc@50008000 { /* ESDHC2 */
-					fsl,card-wired;
+					non-removable;
 					status = "okay";
 				};
 
-				uart3: uart@5000c000 {
+				uart3: serial@5000c000 {
 					fsl,uart-has-rtscts;
 					status = "okay";
 				};
@@ -76,7 +72,7 @@
 				};
 
 				esdhc@50020000 { /* ESDHC3 */
-					fsl,card-wired;
+					non-removable;
 					status = "okay";
 				};
 			};
@@ -90,11 +86,11 @@
 				reg = <0x53fa8000 0x4000>;
 			};
 
-			uart1: uart@53fbc000 {
+			uart1: serial@53fbc000 {
 				status = "okay";
 			};
 
-			uart2: uart@53fc0000 {
+			uart2: serial@53fc0000 {
 				status = "okay";
 			};
 		};
@@ -142,7 +138,7 @@
 				};
 			};
 
-			fec@63fec000 {
+			ethernet@63fec000 {
 				phy-mode = "rmii";
 				phy-reset-gpios = <&gpio7 6 0>;
 				status = "okay";
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 5dd91b942c91..e3e869470cd3 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -88,7 +88,7 @@
 					status = "disabled";
 				};
 
-				uart3: uart@5000c000 {
+				uart3: serial@5000c000 {
 					compatible = "fsl,imx53-uart", "fsl,imx21-uart";
 					reg = <0x5000c000 0x4000>;
 					interrupts = <33>;
@@ -104,6 +104,15 @@
 					status = "disabled";
 				};
 
+				ssi2: ssi@50014000 {
+					compatible = "fsl,imx53-ssi", "fsl,imx21-ssi";
+					reg = <0x50014000 0x4000>;
+					interrupts = <30>;
+					fsl,fifo-depth = <15>;
+					fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */
+					status = "disabled";
+				};
+
 				esdhc@50020000 { /* ESDHC3 */
 					compatible = "fsl,imx53-esdhc";
 					reg = <0x50020000 0x4000>;
@@ -173,14 +182,14 @@
 				status = "disabled";
 			};
 
-			uart1: uart@53fbc000 {
+			uart1: serial@53fbc000 {
 				compatible = "fsl,imx53-uart", "fsl,imx21-uart";
 				reg = <0x53fbc000 0x4000>;
 				interrupts = <31>;
 				status = "disabled";
 			};
 
-			uart2: uart@53fc0000 {
+			uart2: serial@53fc0000 {
 				compatible = "fsl,imx53-uart", "fsl,imx21-uart";
 				reg = <0x53fc0000 0x4000>;
 				interrupts = <32>;
@@ -226,7 +235,7 @@
 				status = "disabled";
 			};
 
-			uart4: uart@53ff0000 {
+			uart4: serial@53ff0000 {
 				compatible = "fsl,imx53-uart", "fsl,imx21-uart";
 				reg = <0x53ff0000 0x4000>;
 				interrupts = <13>;
@@ -241,7 +250,7 @@
 			reg = <0x60000000 0x10000000>;
 			ranges;
 
-			uart5: uart@63f90000 {
+			uart5: serial@63f90000 {
 				compatible = "fsl,imx53-uart", "fsl,imx21-uart";
 				reg = <0x63f90000 0x4000>;
 				interrupts = <86>;
@@ -290,7 +299,31 @@
 				status = "disabled";
 			};
 
-			fec@63fec000 {
+			ssi1: ssi@63fcc000 {
+				compatible = "fsl,imx53-ssi", "fsl,imx21-ssi";
+				reg = <0x63fcc000 0x4000>;
+				interrupts = <29>;
+				fsl,fifo-depth = <15>;
+				fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */
+				status = "disabled";
+			};
+
+			audmux@63fd0000 {
+				compatible = "fsl,imx53-audmux", "fsl,imx31-audmux";
+				reg = <0x63fd0000 0x4000>;
+				status = "disabled";
+			};
+
+			ssi3: ssi@63fe8000 {
+				compatible = "fsl,imx53-ssi", "fsl,imx21-ssi";
+				reg = <0x63fe8000 0x4000>;
+				interrupts = <96>;
+				fsl,fifo-depth = <15>;
+				fsl,ssi-dma-events = <47 46 45 44>; /* TX0 RX0 TX1 RX1 */
+				status = "disabled";
+			};
+
+			ethernet@63fec000 {
 				compatible = "fsl,imx53-fec", "fsl,imx25-fec";
 				reg = <0x63fec000 0x4000>;
 				interrupts = <87>;
diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts
index ce1c8238c897..db4c6096c562 100644
--- a/arch/arm/boot/dts/imx6q-arm2.dts
+++ b/arch/arm/boot/dts/imx6q-arm2.dts
@@ -17,19 +17,14 @@
 	model = "Freescale i.MX6 Quad Armadillo2 Board";
 	compatible = "fsl,imx6q-arm2", "fsl,imx6q";
 
-	chosen {
-		bootargs = "console=ttymxc0,115200 root=/dev/mmcblk3p3 rootwait";
-	};
-
 	memory {
 		reg = <0x10000000 0x80000000>;
 	};
 
 	soc {
 		aips-bus@02100000 { /* AIPS2 */
-			enet@02188000 {
+			ethernet@02188000 {
 				phy-mode = "rgmii";
-				local-mac-address = [00 04 9F 01 1B 61];
 				status = "okay";
 			};
 
@@ -37,16 +32,20 @@
 				cd-gpios = <&gpio6 11 0>;
 				wp-gpios = <&gpio6 14 0>;
 				vmmc-supply = <&reg_3p3v>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usdhc3_1>;
 				status = "okay";
 			};
 
 			usdhc@0219c000 { /* uSDHC4 */
-				fsl,card-wired;
+				non-removable;
 				vmmc-supply = <&reg_3p3v>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usdhc4_1>;
 				status = "okay";
 			};
 
-			uart4: uart@021f0000 {
+			uart4: serial@021f0000 {
 				status = "okay";
 			};
 		};
diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
index 4663a4e5a285..e0ec92973e7e 100644
--- a/arch/arm/boot/dts/imx6q-sabrelite.dts
+++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
@@ -22,8 +22,30 @@
 	};
 
 	soc {
+		aips-bus@02000000 { /* AIPS1 */
+			spba-bus@02000000 {
+				ecspi@02008000 { /* eCSPI1 */
+					fsl,spi-num-chipselects = <1>;
+					cs-gpios = <&gpio3 19 0>;
+					status = "okay";
+
+					flash: m25p80@0 {
+						compatible = "sst,sst25vf016b";
+						spi-max-frequency = <20000000>;
+						reg = <0>;
+					};
+				};
+
+				ssi1: ssi@02028000 {
+					fsl,mode = "i2s-slave";
+					status = "okay";
+				};
+			};
+
+		};
+
 		aips-bus@02100000 { /* AIPS2 */
-			enet@02188000 {
+			ethernet@02188000 {
 				phy-mode = "rgmii";
 				phy-reset-gpios = <&gpio3 23 0>;
 				status = "okay";
@@ -43,13 +65,23 @@
 				status = "okay";
 			};
 
-			uart2: uart@021e8000 {
+			audmux@021d8000 {
+				status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_audmux_1>;
+			};
+
+			uart2: serial@021e8000 {
 				status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_serial2_1>;
 			};
 
 			i2c@021a0000 { /* I2C1 */
 				status = "okay";
 				clock-frequency = <100000>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c1_1>;
 
 				codec: sgtl5000@0a {
 					compatible = "fsl,sgtl5000";
@@ -80,4 +112,18 @@
 			regulator-always-on;
 		};
 	};
+
+	sound {
+		compatible = "fsl,imx6q-sabrelite-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6q-sabrelite-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <4>;
+	};
 };
diff --git a/arch/arm/boot/dts/imx6q-sabresd.dts b/arch/arm/boot/dts/imx6q-sabresd.dts
new file mode 100644
index 000000000000..07509a181178
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-sabresd.dts
@@ -0,0 +1,53 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx6q.dtsi"
+
+/ {
+	model = "Freescale i.MX6Q SABRE Smart Device Board";
+	compatible = "fsl,imx6q-sabresd", "fsl,imx6q";
+
+	memory {
+		reg = <0x10000000 0x40000000>;
+	};
+
+	soc {
+
+		aips-bus@02000000 { /* AIPS1 */
+			spba-bus@02000000 {
+				uart1: serial@02020000 {
+					status = "okay";
+				};
+			};
+		};
+
+		aips-bus@02100000 { /* AIPS2 */
+			ethernet@02188000 {
+				phy-mode = "rgmii";
+				status = "okay";
+			};
+
+			usdhc@02194000 { /* uSDHC2 */
+				cd-gpios = <&gpio2 2 0>;
+				wp-gpios = <&gpio2 3 0>;
+				status = "okay";
+			};
+
+			usdhc@02198000 { /* uSDHC3 */
+				cd-gpios = <&gpio2 0 0>;
+				wp-gpios = <&gpio2 1 0>;
+				status = "okay";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index 4905f51a106f..8c90cbac945f 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -165,7 +165,7 @@
 					status = "disabled";
 				};
 
-				uart1: uart@02020000 {
+				uart1: serial@02020000 {
 					compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
 					reg = <0x02020000 0x4000>;
 					interrupts = <0 26 0x04>;
@@ -177,19 +177,31 @@
 					interrupts = <0 51 0x04>;
 				};
 
-				ssi@02028000 { /* SSI1 */
+				ssi1: ssi@02028000 {
+					compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
 					reg = <0x02028000 0x4000>;
 					interrupts = <0 46 0x04>;
+					fsl,fifo-depth = <15>;
+					fsl,ssi-dma-events = <38 37>;
+					status = "disabled";
 				};
 
-				ssi@0202c000 { /* SSI2 */
+				ssi2: ssi@0202c000 {
+					compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
 					reg = <0x0202c000 0x4000>;
 					interrupts = <0 47 0x04>;
+					fsl,fifo-depth = <15>;
+					fsl,ssi-dma-events = <42 41>;
+					status = "disabled";
 				};
 
-				ssi@02030000 { /* SSI3 */
+				ssi3: ssi@02030000 {
+					compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
 					reg = <0x02030000 0x4000>;
 					interrupts = <0 48 0x04>;
+					fsl,fifo-depth = <15>;
+					fsl,ssi-dma-events = <46 45>;
+					status = "disabled";
 				};
 
 				asrc@02034000 {
@@ -346,6 +358,90 @@
 				compatible = "fsl,imx6q-anatop";
 				reg = <0x020c8000 0x1000>;
 				interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>;
+
+				regulator-1p1@110 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vdd1p1";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1375000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x110>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <4>;
+					anatop-min-voltage = <800000>;
+					anatop-max-voltage = <1375000>;
+				};
+
+				regulator-3p0@120 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vdd3p0";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <3150000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x120>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <0>;
+					anatop-min-voltage = <2625000>;
+					anatop-max-voltage = <3400000>;
+				};
+
+				regulator-2p5@130 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vdd2p5";
+					regulator-min-microvolt = <2000000>;
+					regulator-max-microvolt = <2750000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x130>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <0>;
+					anatop-min-voltage = <2000000>;
+					anatop-max-voltage = <2750000>;
+				};
+
+				regulator-vddcore@140 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "cpu";
+					regulator-min-microvolt = <725000>;
+					regulator-max-microvolt = <1450000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x140>;
+					anatop-vol-bit-shift = <0>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <1>;
+					anatop-min-voltage = <725000>;
+					anatop-max-voltage = <1450000>;
+				};
+
+				regulator-vddpu@140 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vddpu";
+					regulator-min-microvolt = <725000>;
+					regulator-max-microvolt = <1450000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x140>;
+					anatop-vol-bit-shift = <9>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <1>;
+					anatop-min-voltage = <725000>;
+					anatop-max-voltage = <1450000>;
+				};
+
+				regulator-vddsoc@140 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vddsoc";
+					regulator-min-microvolt = <725000>;
+					regulator-max-microvolt = <1450000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x140>;
+					anatop-vol-bit-shift = <18>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <1>;
+					anatop-min-voltage = <725000>;
+					anatop-max-voltage = <1450000>;
+				};
 			};
 
 			usbphy@020c9000 { /* USBPHY1 */
@@ -386,7 +482,62 @@
 			};
 
 			iomuxc@020e0000 {
+				compatible = "fsl,imx6q-iomuxc";
 				reg = <0x020e0000 0x4000>;
+
+				/* shared pinctrl settings */
+				audmux {
+					pinctrl_audmux_1: audmux-1 {
+						fsl,pins = <18   0x80000000	/* MX6Q_PAD_SD2_DAT0__AUDMUX_AUD4_RXD */
+							    1586 0x80000000	/* MX6Q_PAD_SD2_DAT3__AUDMUX_AUD4_TXC */
+							    11   0x80000000	/* MX6Q_PAD_SD2_DAT2__AUDMUX_AUD4_TXD */
+							    3    0x80000000>;	/* MX6Q_PAD_SD2_DAT1__AUDMUX_AUD4_TXFS */
+					};
+				};
+
+				i2c1 {
+					pinctrl_i2c1_1: i2c1grp-1 {
+						fsl,pins = <137 0x4001b8b1	/* MX6Q_PAD_EIM_D21__I2C1_SCL */
+							    196 0x4001b8b1>;	/* MX6Q_PAD_EIM_D28__I2C1_SDA */
+					};
+				};
+
+				serial2 {
+					pinctrl_serial2_1: serial2grp-1 {
+						fsl,pins = <183 0x1b0b1		/* MX6Q_PAD_EIM_D26__UART2_TXD */
+							    191 0x1b0b1>;	/* MX6Q_PAD_EIM_D27__UART2_RXD */
+					};
+				};
+
+				usdhc3 {
+					pinctrl_usdhc3_1: usdhc3grp-1 {
+						fsl,pins = <1273 0x17059	/* MX6Q_PAD_SD3_CMD__USDHC3_CMD */
+							    1281 0x10059	/* MX6Q_PAD_SD3_CLK__USDHC3_CLK	*/
+							    1289 0x17059	/* MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 */
+							    1297 0x17059	/* MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 */
+							    1305 0x17059	/* MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 */
+							    1312 0x17059	/* MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 */
+							    1265 0x17059	/* MX6Q_PAD_SD3_DAT4__USDHC3_DAT4 */
+							    1257 0x17059	/* MX6Q_PAD_SD3_DAT5__USDHC3_DAT5 */
+							    1249 0x17059	/* MX6Q_PAD_SD3_DAT6__USDHC3_DAT6 */
+							    1241 0x17059>;	/* MX6Q_PAD_SD3_DAT7__USDHC3_DAT7 */
+					};
+				};
+
+				usdhc4 {
+					pinctrl_usdhc4_1: usdhc4grp-1 {
+						fsl,pins = <1386 0x17059	/* MX6Q_PAD_SD4_CMD__USDHC4_CMD */
+							    1392 0x10059	/* MX6Q_PAD_SD4_CLK__USDHC4_CLK	*/
+							    1462 0x17059	/* MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 */
+							    1470 0x17059	/* MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 */
+							    1478 0x17059	/* MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 */
+							    1486 0x17059	/* MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 */
+							    1493 0x17059	/* MX6Q_PAD_SD4_DAT4__USDHC4_DAT4 */
+							    1501 0x17059	/* MX6Q_PAD_SD4_DAT5__USDHC4_DAT5 */
+							    1509 0x17059	/* MX6Q_PAD_SD4_DAT6__USDHC4_DAT6 */
+							    1517 0x17059>;	/* MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 */
+					};
+				};
 			};
 
 			dcic@020e4000 { /* DCIC1 */
@@ -422,7 +573,7 @@
 				reg = <0x0217c000 0x4000>;
 			};
 
-			enet@02188000 {
+			ethernet@02188000 {
 				compatible = "fsl,imx6q-fec";
 				reg = <0x02188000 0x4000>;
 				interrupts = <0 118 0x04 0 119 0x04>;
@@ -527,7 +678,9 @@
 			};
 
 			audmux@021d8000 {
+				compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux";
 				reg = <0x021d8000 0x4000>;
+				status = "disabled";
 			};
 
 			mipi@021dc000 { /* MIPI-CSI */
@@ -543,28 +696,28 @@
 				interrupts = <0 18 0x04>;
 			};
 
-			uart2: uart@021e8000 {
+			uart2: serial@021e8000 {
 				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
 				reg = <0x021e8000 0x4000>;
 				interrupts = <0 27 0x04>;
 				status = "disabled";
 			};
 
-			uart3: uart@021ec000 {
+			uart3: serial@021ec000 {
 				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
 				reg = <0x021ec000 0x4000>;
 				interrupts = <0 28 0x04>;
 				status = "disabled";
 			};
 
-			uart4: uart@021f0000 {
+			uart4: serial@021f0000 {
 				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
 				reg = <0x021f0000 0x4000>;
 				interrupts = <0 29 0x04>;
 				status = "disabled";
 			};
 
-			uart5: uart@021f4000 {
+			uart5: serial@021f4000 {
 				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
 				reg = <0x021f4000 0x4000>;
 				interrupts = <0 30 0x04>;
diff --git a/arch/arm/boot/dts/kirkwood-dns320.dts b/arch/arm/boot/dts/kirkwood-dns320.dts
new file mode 100644
index 000000000000..dc09a735b04a
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-dns320.dts
@@ -0,0 +1,64 @@
+/dts-v1/;
+
+/include/ "kirkwood.dtsi"
+
+/ {
+	model = "D-Link DNS-320 NAS (Rev A1)";
+	compatible = "dlink,dns-320-a1", "dlink,dns-320", "dlink,dns-kirkwood", "mrvl,kirkwood-88f6281", "mrvl,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+
+	ocp@f1000000 {
+		serial@12000 {
+			clock-frequency = <166666667>;
+			status = "okay";
+		};
+
+		serial@12100 {
+			clock-frequency = <166666667>;
+			status = "okay";
+		};
+
+		nand@3000000 {
+			status = "okay";
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0000000 0x100000>;
+				read-only;
+			};
+
+			partition@100000 {
+				label = "uImage";
+				reg = <0x0100000 0x500000>;
+			};
+
+			partition@600000 {
+				label = "ramdisk";
+				reg = <0x0600000 0x500000>;
+			};
+
+			partition@b00000 {
+				label = "image";
+				reg = <0x0b00000 0x6600000>;
+			};
+
+			partition@7100000 {
+				label = "mini firmware";
+				reg = <0x7100000 0xa00000>;
+			};
+
+			partition@7b00000 {
+				label = "config";
+				reg = <0x7b00000 0x500000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-dns325.dts b/arch/arm/boot/dts/kirkwood-dns325.dts
new file mode 100644
index 000000000000..c2a5562525d2
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-dns325.dts
@@ -0,0 +1,59 @@
+/dts-v1/;
+
+/include/ "kirkwood.dtsi"
+
+/ {
+	model = "D-Link DNS-325 NAS (Rev A1)";
+	compatible = "dlink,dns-325-a1", "dlink,dns-325", "dlink,dns-kirkwood", "mrvl,kirkwood-88f6281", "mrvl,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+
+	ocp@f1000000 {
+		serial@12000 {
+			clock-frequency = <200000000>;
+			status = "okay";
+		};
+
+		nand@3000000 {
+			status = "okay";
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0000000 0x100000>;
+				read-only;
+			};
+
+			partition@100000 {
+				label = "uImage";
+				reg = <0x0100000 0x500000>;
+			};
+
+			partition@600000 {
+				label = "ramdisk";
+				reg = <0x0600000 0x500000>;
+			};
+
+			partition@b00000 {
+				label = "image";
+				reg = <0x0b00000 0x6600000>;
+			};
+
+			partition@7100000 {
+				label = "mini firmware";
+				reg = <0x7100000 0xa00000>;
+			};
+
+			partition@7b00000 {
+				label = "config";
+				reg = <0x7b00000 0x500000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts
new file mode 100644
index 000000000000..ada0f0c23085
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts
@@ -0,0 +1,44 @@
+/dts-v1/;
+
+/include/ "kirkwood.dtsi"
+
+/ {
+	model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)";
+	compatible = "raidsonic,ib-nas6210-b", "raidsonic,ib-nas6220-b", "raidsonic,ib-nas6210", "raidsonic,ib-nas6220", "raidsonic,ib-nas62x0",  "mrvl,kirkwood-88f6281", "mrvl,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+
+	ocp@f1000000 {
+		serial@12000 {
+			clock-frequency = <200000000>;
+			status = "okay";
+		};
+
+		nand@3000000 {
+			status = "okay";
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0000000 0x100000>;
+			};
+
+			partition@100000 {
+				label = "uImage";
+				reg = <0x0100000 0x600000>;
+			};
+
+			partition@700000 {
+				label = "root";
+				reg = <0x0700000 0xf900000>;
+			};
+
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts
new file mode 100644
index 000000000000..1ba75d4adecc
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
@@ -0,0 +1,26 @@
+/dts-v1/;
+
+/include/ "kirkwood.dtsi"
+
+/ {
+	model = "Iomega Iconnect";
+	compatible = "iom,iconnect-1.1", "iom,iconnect", "mrvl,kirkwood-88f6281", "mrvl,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk mtdparts=orion_nand:0xc0000@0x0(uboot),0x20000@0xa0000(env),0x300000@0x100000(zImage),0x300000@0x540000(initrd),0x1f400000@0x980000(boot)";
+		linux,initrd-start = <0x4500040>;
+		linux,initrd-end   = <0x4800000>;
+	};
+
+	ocp@f1000000 {
+		serial@12000 {
+			clock-frequency = <200000000>;
+			status = "ok";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
index 3474ef890945..926528b81baa 100644
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -5,7 +5,7 @@
 
 	ocp@f1000000 {
 		compatible = "simple-bus";
-		ranges = <0 0xf1000000 0x1000000>;
+		ranges = <0 0xf1000000 0x4000000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 
@@ -32,5 +32,18 @@
 			reg = <0x10300 0x20>;
 			interrupts = <53>;
 		};
+
+		nand@3000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cle = <0>;
+			ale = <1>;
+			bank-width = <1>;
+			compatible = "mrvl,orion-nand";
+			reg = <0x3000000 0x400>;
+			chip-delay = <25>;
+			/* set partition map and/or chip-delay in board dts */
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/kizbox.dts b/arch/arm/boot/dts/kizbox.dts
new file mode 100644
index 000000000000..e8814fe0e277
--- /dev/null
+++ b/arch/arm/boot/dts/kizbox.dts
@@ -0,0 +1,138 @@
+/*
+ * kizbox.dts - Device Tree file for Overkiz Kizbox board
+ *
+ * Copyright (C) 2012 Boris BREZILLON <linux-arm@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+/dts-v1/;
+/include/ "at91sam9g20.dtsi"
+
+/ {
+
+	model = "Overkiz kizbox";
+	compatible = "overkiz,kizbox", "atmel,at91sam9g20", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "panic=5 ubi.mtd=1 rootfstype=ubifs root=ubi0:root";
+	};
+
+	memory {
+		reg = <0x20000000 0x2000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		main_clock: clock@0 {
+			compatible = "atmel,osc", "fixed-clock";
+			clock-frequency = <18432000>;
+		};
+	};
+
+	ahb {
+		apb {
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			usart0: serial@fffb0000 {
+				status = "okay";
+			};
+
+			usart1: serial@fffb4000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@fffc4000 {
+				phy-mode = "mii";
+				status = "okay";
+			};
+
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			status = "okay";
+
+			bootloaderkernel@0 {
+				label = "bootloader-kernel";
+				reg = <0x0 0xc0000>;
+			};
+
+			ubi@c0000 {
+				label = "ubi";
+				reg = <0xc0000 0x7f40000>;
+			};
+
+		};
+
+		usb0: ohci@00500000 {
+			num-ports = <1>;
+			status = "okay";
+		};
+	};
+
+	i2c@0 {
+		status = "okay";
+
+		pcf8563@51 {
+			/* nxp pcf8563 rtc */
+			compatible = "nxp,pcf8563";
+			reg = <0x51>;
+		};
+
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led1g {
+			label = "led1:green";
+			gpios = <&pioB 0 1>;
+			linux,default-trigger = "none";
+		};
+
+		led1r {
+			label = "led1:red";
+			gpios = <&pioB 1 1>;
+			linux,default-trigger = "none";
+		};
+
+		led2g {
+			label = "led2:green";
+			gpios = <&pioB 2 1>;
+			linux,default-trigger = "none";
+			default-state = "on";
+		};
+
+		led2r {
+			label = "led2:red";
+			gpios = <&pioB 3 1>;
+			linux,default-trigger = "none";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset {
+			label = "reset";
+			gpios = <&pioB 30 1>;
+			linux,code = <0x100>;
+			gpio-key,wakeup;
+		};
+
+		mode {
+			label = "mode";
+			gpios = <&pioB 31 1>;
+			linux,code = <0x101>;
+			gpio-key,wakeup;
+		};
+	};
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi
new file mode 100644
index 000000000000..3f5dad801a98
--- /dev/null
+++ b/arch/arm/boot/dts/lpc32xx.dtsi
@@ -0,0 +1,255 @@
+/*
+ * NXP LPC32xx SoC
+ *
+ * Copyright 2012 Roland Stigge <stigge@antcom.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "nxp,lpc3220";
+	interrupt-parent = <&mic>;
+
+	cpus {
+		cpu@0 {
+			compatible = "arm,arm926ejs";
+		};
+	};
+
+	ahb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0x20000000 0x20000000 0x30000000>;
+
+		/*
+		 * Enable either SLC or MLC
+		 */
+		slc: flash@20020000 {
+			compatible = "nxp,lpc3220-slc";
+			reg = <0x20020000 0x1000>;
+			status = "disable";
+		};
+
+		mlc: flash@200B0000 {
+			compatible = "nxp,lpc3220-mlc";
+			reg = <0x200B0000 0x1000>;
+			status = "disable";
+		};
+
+		dma@31000000 {
+			compatible = "arm,pl080", "arm,primecell";
+			reg = <0x31000000 0x1000>;
+			interrupts = <0x1c 0>;
+		};
+
+		/*
+		 * Enable either ohci or usbd (gadget)!
+		 */
+		ohci@31020000 {
+			compatible = "nxp,ohci-nxp", "usb-ohci";
+			reg = <0x31020000 0x300>;
+			interrupts = <0x3b 0>;
+			status = "disable";
+		};
+
+		usbd@31020000 {
+			compatible = "nxp,lpc3220-udc";
+			reg = <0x31020000 0x300>;
+			interrupts = <0x3d 0>, <0x3e 0>, <0x3c 0>, <0x3a 0>;
+			status = "disable";
+		};
+
+		clcd@31040000 {
+			compatible = "arm,pl110", "arm,primecell";
+			reg = <0x31040000 0x1000>;
+			interrupts = <0x0e 0>;
+			status = "disable";
+		};
+
+		mac: ethernet@31060000 {
+			compatible = "nxp,lpc-eth";
+			reg = <0x31060000 0x1000>;
+			interrupts = <0x1d 0>;
+		};
+
+		apb {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0x20000000 0x20000000 0x30000000>;
+
+			ssp0: ssp@20084000 {
+				compatible = "arm,pl022", "arm,primecell";
+				reg = <0x20084000 0x1000>;
+				interrupts = <0x14 0>;
+			};
+
+			spi1: spi@20088000 {
+				compatible = "nxp,lpc3220-spi";
+				reg = <0x20088000 0x1000>;
+			};
+
+			ssp1: ssp@2008c000 {
+				compatible = "arm,pl022", "arm,primecell";
+				reg = <0x2008c000 0x1000>;
+				interrupts = <0x15 0>;
+			};
+
+			spi2: spi@20090000 {
+				compatible = "nxp,lpc3220-spi";
+				reg = <0x20090000 0x1000>;
+			};
+
+			i2s0: i2s@20094000 {
+				compatible = "nxp,lpc3220-i2s";
+				reg = <0x20094000 0x1000>;
+			};
+
+			sd@20098000 {
+				compatible = "arm,pl180", "arm,primecell";
+				reg = <0x20098000 0x1000>;
+				interrupts = <0x0f 0>, <0x0d 0>;
+			};
+
+			i2s1: i2s@2009C000 {
+				compatible = "nxp,lpc3220-i2s";
+				reg = <0x2009C000 0x1000>;
+			};
+
+			uart3: serial@40080000 {
+				compatible = "nxp,serial";
+				reg = <0x40080000 0x1000>;
+			};
+
+			uart4: serial@40088000 {
+				compatible = "nxp,serial";
+				reg = <0x40088000 0x1000>;
+			};
+
+			uart5: serial@40090000 {
+				compatible = "nxp,serial";
+				reg = <0x40090000 0x1000>;
+			};
+
+			uart6: serial@40098000 {
+				compatible = "nxp,serial";
+				reg = <0x40098000 0x1000>;
+			};
+
+			i2c1: i2c@400A0000 {
+				compatible = "nxp,pnx-i2c";
+				reg = <0x400A0000 0x100>;
+				interrupts = <0x33 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pnx,timeout = <0x64>;
+			};
+
+			i2c2: i2c@400A8000 {
+				compatible = "nxp,pnx-i2c";
+				reg = <0x400A8000 0x100>;
+				interrupts = <0x32 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pnx,timeout = <0x64>;
+			};
+
+			i2cusb: i2c@31020300 {
+				compatible = "nxp,pnx-i2c";
+				reg = <0x31020300 0x100>;
+				interrupts = <0x3f 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pnx,timeout = <0x64>;
+			};
+		};
+
+		fab {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0x20000000 0x20000000 0x30000000>;
+
+			/*
+			 * MIC Interrupt controller includes:
+			 *   MIC @40008000
+			 *   SIC1 @4000C000
+			 *   SIC2 @40010000
+			 */
+			mic: interrupt-controller@40008000 {
+				compatible = "nxp,lpc3220-mic";
+				interrupt-controller;
+				reg = <0x40008000 0xC000>;
+				#interrupt-cells = <2>;
+			};
+
+			uart1: serial@40014000 {
+				compatible = "nxp,serial";
+				reg = <0x40014000 0x1000>;
+			};
+
+			uart2: serial@40018000 {
+				compatible = "nxp,serial";
+				reg = <0x40018000 0x1000>;
+			};
+
+			uart7: serial@4001C000 {
+				compatible = "nxp,serial";
+				reg = <0x4001C000 0x1000>;
+			};
+
+			rtc@40024000 {
+				compatible = "nxp,lpc3220-rtc";
+				reg = <0x40024000 0x1000>;
+				interrupts = <0x34 0>;
+			};
+
+			gpio: gpio@40028000 {
+				compatible = "nxp,lpc3220-gpio";
+				reg = <0x40028000 0x1000>;
+				gpio-controller;
+				#gpio-cells = <3>; /* bank, pin, flags */
+			};
+
+			watchdog@4003C000 {
+				compatible = "nxp,pnx4008-wdt";
+				reg = <0x4003C000 0x1000>;
+			};
+
+			/*
+			 * TSC vs. ADC: Since those two share the same
+			 * hardware, you need to choose from one of the
+			 * following two and do 'status = "okay";' for one of
+			 * them
+			 */
+
+			adc@40048000 {
+				compatible = "nxp,lpc3220-adc";
+				reg = <0x40048000 0x1000>;
+				interrupts = <0x27 0>;
+				status = "disable";
+			};
+
+			tsc@40048000 {
+				compatible = "nxp,lpc3220-tsc";
+				reg = <0x40048000 0x1000>;
+				interrupts = <0x27 0>;
+				status = "disable";
+			};
+
+			key@40050000 {
+				compatible = "nxp,lpc3220-key";
+				reg = <0x40050000 0x1000>;
+			};
+
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/mmp2-brownstone.dts b/arch/arm/boot/dts/mmp2-brownstone.dts
new file mode 100644
index 000000000000..153a4b2d12b5
--- /dev/null
+++ b/arch/arm/boot/dts/mmp2-brownstone.dts
@@ -0,0 +1,38 @@
+/*
+ *  Copyright (C) 2012 Marvell Technology Group Ltd.
+ *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+/dts-v1/;
+/include/ "mmp2.dtsi"
+
+/ {
+	model = "Marvell MMP2 Aspenite Development Board";
+	compatible = "mrvl,mmp2-brownstone", "mrvl,mmp2";
+
+	chosen {
+		bootargs = "console=ttyS2,38400 root=/dev/nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on";
+	};
+
+	memory {
+		reg = <0x00000000 0x04000000>;
+	};
+
+	soc {
+		apb@d4000000 {
+			uart3: uart@d4018000 {
+				status = "okay";
+			};
+			twsi1: i2c@d4011000 {
+				status = "okay";
+			};
+			rtc: rtc@d4010000 {
+				status = "okay";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi
new file mode 100644
index 000000000000..80f74e256408
--- /dev/null
+++ b/arch/arm/boot/dts/mmp2.dtsi
@@ -0,0 +1,220 @@
+/*
+ *  Copyright (C) 2012 Marvell Technology Group Ltd.
+ *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	aliases {
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		i2c0 = &twsi1;
+		i2c1 = &twsi2;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&intc>;
+		ranges;
+
+		axi@d4200000 {	/* AXI */
+			compatible = "mrvl,axi-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xd4200000 0x00200000>;
+			ranges;
+
+			intc: interrupt-controller@d4282000 {
+				compatible = "mrvl,mmp2-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0xd4282000 0x1000>;
+				mrvl,intc-nr-irqs = <64>;
+			};
+
+			intcmux4@d4282150 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <4>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x150 0x4>, <0x168 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <2>;
+			};
+
+			intcmux5: interrupt-controller@d4282154 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <5>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x154 0x4>, <0x16c 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <2>;
+				mrvl,clr-mfp-irq = <1>;
+			};
+
+			intcmux9: interrupt-controller@d4282180 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <9>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x180 0x4>, <0x17c 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <3>;
+			};
+
+			intcmux17: interrupt-controller@d4282158 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <17>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x158 0x4>, <0x170 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <5>;
+			};
+
+			intcmux35: interrupt-controller@d428215c {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <35>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x15c 0x4>, <0x174 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <15>;
+			};
+
+			intcmux51: interrupt-controller@d4282160 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <51>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x160 0x4>, <0x178 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <2>;
+			};
+
+			intcmux55: interrupt-controller@d4282188 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <55>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x188 0x4>, <0x184 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <2>;
+			};
+		};
+
+		apb@d4000000 {	/* APB */
+			compatible = "mrvl,apb-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xd4000000 0x00200000>;
+			ranges;
+
+			timer0: timer@d4014000 {
+				compatible = "mrvl,mmp-timer";
+				reg = <0xd4014000 0x100>;
+				interrupts = <13>;
+			};
+
+			uart1: uart@d4030000 {
+				compatible = "mrvl,mmp-uart";
+				reg = <0xd4030000 0x1000>;
+				interrupts = <27>;
+				status = "disabled";
+			};
+
+			uart2: uart@d4017000 {
+				compatible = "mrvl,mmp-uart";
+				reg = <0xd4017000 0x1000>;
+				interrupts = <28>;
+				status = "disabled";
+			};
+
+			uart3: uart@d4018000 {
+				compatible = "mrvl,mmp-uart";
+				reg = <0xd4018000 0x1000>;
+				interrupts = <24>;
+				status = "disabled";
+			};
+
+			uart4: uart@d4016000 {
+				compatible = "mrvl,mmp-uart";
+				reg = <0xd4016000 0x1000>;
+				interrupts = <46>;
+				status = "disabled";
+			};
+
+			gpio@d4019000 {
+				compatible = "mrvl,mmp-gpio";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xd4019000 0x1000>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupts = <49>;
+				interrupt-names = "gpio_mux";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				ranges;
+
+				gcb0: gpio@d4019000 {
+					reg = <0xd4019000 0x4>;
+				};
+
+				gcb1: gpio@d4019004 {
+					reg = <0xd4019004 0x4>;
+				};
+
+				gcb2: gpio@d4019008 {
+					reg = <0xd4019008 0x4>;
+				};
+
+				gcb3: gpio@d4019100 {
+					reg = <0xd4019100 0x4>;
+				};
+
+				gcb4: gpio@d4019104 {
+					reg = <0xd4019104 0x4>;
+				};
+
+				gcb5: gpio@d4019108 {
+					reg = <0xd4019108 0x4>;
+				};
+			};
+
+			twsi1: i2c@d4011000 {
+				compatible = "mrvl,mmp-twsi";
+				reg = <0xd4011000 0x1000>;
+				interrupts = <7>;
+				mrvl,i2c-fast-mode;
+				status = "disabled";
+			};
+
+			twsi2: i2c@d4025000 {
+				compatible = "mrvl,mmp-twsi";
+				reg = <0xd4025000 0x1000>;
+				interrupts = <58>;
+				status = "disabled";
+			};
+
+			rtc: rtc@d4010000 {
+				compatible = "mrvl,mmp-rtc";
+				reg = <0xd4010000 0x1000>;
+				interrupts = <1 0>;
+				interrupt-names = "rtc 1Hz", "rtc alarm";
+				interrupt-parent = <&intcmux5>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/msm8660-surf.dts b/arch/arm/boot/dts/msm8660-surf.dts
index 15ded0deaa79..45bc4bb04e57 100644
--- a/arch/arm/boot/dts/msm8660-surf.dts
+++ b/arch/arm/boot/dts/msm8660-surf.dts
@@ -10,7 +10,7 @@
 	intc: interrupt-controller@02080000 {
 		compatible = "qcom,msm-8660-qgic";
 		interrupt-controller;
-		#interrupt-cells = <1>;
+		#interrupt-cells = <3>;
 		reg = < 0x02080000 0x1000 >,
 		      < 0x02081000 0x1000 >;
 	};
@@ -19,6 +19,6 @@
 		compatible = "qcom,msm-hsuart", "qcom,msm-uart";
 		reg = <0x19c40000 0x1000>,
 		      <0x19c00000 0x1000>;
-		interrupts = <195>;
+		interrupts = <0 195 0x0>;
 	};
 };
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index 9f72cd4cf308..5b4506c0a8c4 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -18,3 +18,52 @@
 		reg = <0x80000000 0x20000000>; /* 512 MB */
 	};
 };
+
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+
+		vsim: regulator@10 {
+			compatible = "ti,twl4030-vsim";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3000000>;
+		};
+	};
+};
+
+/include/ "twl4030.dtsi"
+
+&i2c2 {
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+
+	/*
+	 * Display monitor features are burnt in the EEPROM
+	 * as EDID data.
+	 */
+	eeprom@50 {
+		compatible = "ti,eeprom";
+		reg = <0x50>;
+	};
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmc1>;
+	vmmc_aux-supply = <&vsim>;
+	bus-width = <8>;
+};
+
+&mmc2 {
+	status = "disable";
+};
+
+&mmc3 {
+	status = "disable";
+};
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index c6121357c1eb..99474fa5fac4 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -69,6 +69,60 @@
 			reg = <0x48200000 0x1000>;
 		};
 
+		gpio1: gpio@48310000 {
+			compatible = "ti,omap3-gpio";
+			ti,hwmods = "gpio1";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio2: gpio@49050000 {
+			compatible = "ti,omap3-gpio";
+			ti,hwmods = "gpio2";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio3: gpio@49052000 {
+			compatible = "ti,omap3-gpio";
+			ti,hwmods = "gpio3";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio4: gpio@49054000 {
+			compatible = "ti,omap3-gpio";
+			ti,hwmods = "gpio4";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio5: gpio@49056000 {
+			compatible = "ti,omap3-gpio";
+			ti,hwmods = "gpio5";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio6: gpio@49058000 {
+			compatible = "ti,omap3-gpio";
+			ti,hwmods = "gpio6";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
 		uart1: serial@4806a000 {
 			compatible = "ti,omap3-uart";
 			ti,hwmods = "uart1";
@@ -113,5 +167,53 @@
 			#size-cells = <0>;
 			ti,hwmods = "i2c3";
 		};
+
+		mcspi1: spi@48098000 {
+			compatible = "ti,omap2-mcspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi1";
+			ti,spi-num-cs = <4>;
+		};
+
+		mcspi2: spi@4809a000 {
+			compatible = "ti,omap2-mcspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi2";
+			ti,spi-num-cs = <2>;
+		};
+
+		mcspi3: spi@480b8000 {
+			compatible = "ti,omap2-mcspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi3";
+			ti,spi-num-cs = <2>;
+		};
+
+		mcspi4: spi@480ba000 {
+			compatible = "ti,omap2-mcspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi4";
+			ti,spi-num-cs = <1>;
+		};
+
+		mmc1: mmc@4809c000 {
+			compatible = "ti,omap3-hsmmc";
+			ti,hwmods = "mmc1";
+			ti,dual-volt;
+		};
+
+		mmc2: mmc@480b4000 {
+			compatible = "ti,omap3-hsmmc";
+			ti,hwmods = "mmc2";
+		};
+
+		mmc3: mmc@480ad000 {
+			compatible = "ti,omap3-hsmmc";
+			ti,hwmods = "mmc3";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts
index 9755ad5917f8..1efe0c587985 100644
--- a/arch/arm/boot/dts/omap4-panda.dts
+++ b/arch/arm/boot/dts/omap4-panda.dts
@@ -17,4 +17,75 @@
 		device_type = "memory";
 		reg = <0x80000000 0x40000000>; /* 1 GB */
 	};
+
+	leds {
+		compatible = "gpio-leds";
+		heartbeat {
+			label = "pandaboard::status1";
+			gpios = <&gpio1 7 0>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		mmc {
+			label = "pandaboard::status2";
+			gpios = <&gpio1 8 0>;
+			linux,default-trigger = "mmc0";
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		/* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
+		interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */
+		interrupt-parent = <&gic>;
+	};
+};
+
+/include/ "twl6030.dtsi"
+
+&i2c2 {
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+
+	/*
+	 * Display monitor features are burnt in their EEPROM as EDID data.
+	 * The EEPROM is connected as I2C slave device.
+	 */
+	eeprom@50 {
+		compatible = "ti,eeprom";
+		reg = <0x50>;
+	};
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmc>;
+	bus-width = <8>;
+};
+
+&mmc2 {
+	status = "disable";
+};
+
+&mmc3 {
+	status = "disable";
+};
+
+&mmc4 {
+	status = "disable";
+};
+
+&mmc5 {
+	ti,non-removable;
+	bus-width = <4>;
 };
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index 63c6b2b2bf42..d08c4d137280 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -17,4 +17,144 @@
 		device_type = "memory";
 		reg = <0x80000000 0x40000000>; /* 1 GB */
 	};
+
+	vdd_eth: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_ETH";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 16 0>;  /* gpio line 48 */
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		debug0 {
+			label = "omap4:green:debug0";
+			gpios = <&gpio2 29 0>; /* 61 */
+		};
+
+		debug1 {
+			label = "omap4:green:debug1";
+			gpios = <&gpio1 30 0>; /* 30 */
+		};
+
+		debug2 {
+			label = "omap4:green:debug2";
+			gpios = <&gpio1 7 0>; /* 7 */
+		};
+
+		debug3 {
+			label = "omap4:green:debug3";
+			gpios = <&gpio1 8 0>; /* 8 */
+		};
+
+		debug4 {
+			label = "omap4:green:debug4";
+			gpios = <&gpio2 18 0>; /* 50 */
+		};
+
+		user1 {
+			label = "omap4:blue:user";
+			gpios = <&gpio6 9 0>; /* 169 */
+		};
+
+		user2 {
+			label = "omap4:red:user";
+			gpios = <&gpio6 10 0>; /* 170 */
+		};
+
+		user3 {
+			label = "omap4:green:user";
+			gpios = <&gpio5 11 0>; /* 139 */
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		/* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
+		interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */
+		interrupt-parent = <&gic>;
+	};
+};
+
+/include/ "twl6030.dtsi"
+
+&i2c2 {
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+
+	/*
+	 * Temperature Sensor
+	 * http://www.ti.com/lit/ds/symlink/tmp105.pdf
+	 */
+	tmp105@48 {
+		compatible = "ti,tmp105";
+		reg = <0x48>;
+	};
+
+	/*
+	 * Ambient Light Sensor
+	 * http://www.rohm.com/products/databook/sensor/pdf/bh1780gli-e.pdf
+	 */
+	bh1780@29 {
+		compatible = "rohm,bh1780";
+		reg = <0x29>;
+	};
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+
+	/*
+	 * 3-Axis Digital Compass
+	 * http://www.sparkfun.com/datasheets/Sensors/Magneto/HMC5843.pdf
+	 */
+	hmc5843@1e {
+		compatible = "honeywell,hmc5843";
+		reg = <0x1e>;
+	};
+};
+
+&mcspi1 {
+	eth@0 {
+		compatible = "ks8851";
+		spi-max-frequency = <24000000>;
+		reg = <0>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <2>; /* gpio line 34 */
+		vdd-supply = <&vdd_eth>;
+	};
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmc>;
+	bus-width = <8>;
+};
+
+&mmc2 {
+	vmmc-supply = <&vaux1>;
+	bus-width = <8>;
+	ti,non-removable;
+};
+
+&mmc3 {
+	status = "disable";
+};
+
+&mmc4 {
+	status = "disable";
+};
+
+&mmc5 {
+	bus-width = <4>;
+	ti,non-removable;
 };
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 3d35559e77bc..359c4979c8aa 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -104,6 +104,60 @@
 			      <0x48240100 0x0100>;
 		};
 
+		gpio1: gpio@4a310000 {
+			compatible = "ti,omap4-gpio";
+			ti,hwmods = "gpio1";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio2: gpio@48055000 {
+			compatible = "ti,omap4-gpio";
+			ti,hwmods = "gpio2";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio3: gpio@48057000 {
+			compatible = "ti,omap4-gpio";
+			ti,hwmods = "gpio3";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio4: gpio@48059000 {
+			compatible = "ti,omap4-gpio";
+			ti,hwmods = "gpio4";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio5: gpio@4805b000 {
+			compatible = "ti,omap4-gpio";
+			ti,hwmods = "gpio5";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio6: gpio@4805d000 {
+			compatible = "ti,omap4-gpio";
+			ti,hwmods = "gpio6";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
 		uart1: serial@4806a000 {
 			compatible = "ti,omap4-uart";
 			ti,hwmods = "uart1";
@@ -155,5 +209,68 @@
 			#size-cells = <0>;
 			ti,hwmods = "i2c4";
 		};
+
+		mcspi1: spi@48098000 {
+			compatible = "ti,omap4-mcspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi1";
+			ti,spi-num-cs = <4>;
+		};
+
+		mcspi2: spi@4809a000 {
+			compatible = "ti,omap4-mcspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi2";
+			ti,spi-num-cs = <2>;
+		};
+
+		mcspi3: spi@480b8000 {
+			compatible = "ti,omap4-mcspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi3";
+			ti,spi-num-cs = <2>;
+		};
+
+		mcspi4: spi@480ba000 {
+			compatible = "ti,omap4-mcspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi4";
+			ti,spi-num-cs = <1>;
+		};
+
+		mmc1: mmc@4809c000 {
+			compatible = "ti,omap4-hsmmc";
+			ti,hwmods = "mmc1";
+			ti,dual-volt;
+			ti,needs-special-reset;
+		};
+
+		mmc2: mmc@480b4000 {
+			compatible = "ti,omap4-hsmmc";
+			ti,hwmods = "mmc2";
+			ti,needs-special-reset;
+		};
+
+		mmc3: mmc@480ad000 {
+			compatible = "ti,omap4-hsmmc";
+			ti,hwmods = "mmc3";
+			ti,needs-special-reset;
+		};
+
+		mmc4: mmc@480d1000 {
+			compatible = "ti,omap4-hsmmc";
+			ti,hwmods = "mmc4";
+			ti,needs-special-reset;
+		};
+
+		mmc5: mmc@480d5000 {
+			compatible = "ti,omap4-hsmmc";
+			ti,hwmods = "mmc5";
+			ti,needs-special-reset;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/phy3250.dts b/arch/arm/boot/dts/phy3250.dts
new file mode 100644
index 000000000000..c4ff6d1a018b
--- /dev/null
+++ b/arch/arm/boot/dts/phy3250.dts
@@ -0,0 +1,145 @@
+/*
+ * PHYTEC phyCORE-LPC3250 board
+ *
+ * Copyright 2012 Roland Stigge <stigge@antcom.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "lpc32xx.dtsi"
+
+/ {
+	model = "PHYTEC phyCORE-LPC3250 board based on NXP LPC3250";
+	compatible = "phytec,phy3250", "nxp,lpc3250";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x4000000>;
+	};
+
+	ahb {
+		mac: ethernet@31060000 {
+			phy-mode = "rmii";
+			use-iram;
+		};
+
+		/* Here, choose exactly one from: ohci, usbd */
+		ohci@31020000 {
+			transceiver = <&isp1301>;
+			status = "okay";
+		};
+
+/*
+		usbd@31020000 {
+			transceiver = <&isp1301>;
+			status = "okay";
+		};
+*/
+
+		clcd@31040000 {
+			status = "okay";
+		};
+
+		/* 64MB Flash via SLC NAND controller */
+		slc: flash@20020000 {
+			status = "okay";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			mtd0@00000000 {
+				label = "phy3250-boot";
+				reg = <0x00000000 0x00064000>;
+				read-only;
+			};
+
+			mtd1@00064000 {
+				label = "phy3250-uboot";
+				reg = <0x00064000 0x00190000>;
+				read-only;
+			};
+
+			mtd2@001f4000 {
+				label = "phy3250-ubt-prms";
+				reg = <0x001f4000 0x00010000>;
+			};
+
+			mtd3@00204000 {
+				label = "phy3250-kernel";
+				reg = <0x00204000 0x00400000>;
+			};
+
+			mtd4@00604000 {
+				label = "phy3250-rootfs";
+				reg = <0x00604000 0x039fc000>;
+			};
+		};
+
+		apb {
+			i2c1: i2c@400A0000 {
+				clock-frequency = <100000>;
+
+				pcf8563: rtc@51 {
+					compatible = "nxp,pcf8563";
+					reg = <0x51>;
+				};
+
+				uda1380: uda1380@18 {
+					compatible = "nxp,uda1380";
+					reg = <0x18>;
+					power-gpio = <&gpio 0x59 0>;
+					reset-gpio = <&gpio 0x51 0>;
+					dac-clk = "wspll";
+				};
+			};
+
+			i2c2: i2c@400A8000 {
+				clock-frequency = <100000>;
+			};
+
+			i2cusb: i2c@31020300 {
+				clock-frequency = <100000>;
+
+				isp1301: usb-transceiver@2c {
+					compatible = "nxp,isp1301";
+					reg = <0x2c>;
+				};
+			};
+
+			ssp0: ssp@20084000 {
+				eeprom: at25@0 {
+					compatible = "atmel,at25";
+				};
+			};
+		};
+
+		fab {
+			tsc@40048000 {
+				status = "okay";
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			gpios = <&gpio 5 1 1>; /* GPO_P3 1, GPIO 80, active low */
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led1 {
+			gpios = <&gpio 5 14 1>; /* GPO_P3 14, GPIO 93, active low */
+			linux,default-trigger = "timer";
+			default-state = "off";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/pxa168.dtsi b/arch/arm/boot/dts/pxa168.dtsi
index d32d5128f225..31a718696080 100644
--- a/arch/arm/boot/dts/pxa168.dtsi
+++ b/arch/arm/boot/dts/pxa168.dtsi
@@ -18,13 +18,6 @@
 		i2c1 = &twsi2;
 	};
 
-	intc: intc-interrupt-controller@d4282000 {
-		compatible = "mrvl,mmp-intc", "mrvl,intc";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		reg = <0xd4282000 0x1000>;
-	};
-
 	soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -32,6 +25,23 @@
 		interrupt-parent = <&intc>;
 		ranges;
 
+		axi@d4200000 {	/* AXI */
+			compatible = "mrvl,axi-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xd4200000 0x00200000>;
+			ranges;
+
+			intc: interrupt-controller@d4282000 {
+				compatible = "mrvl,mmp-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0xd4282000 0x1000>;
+				mrvl,intc-nr-irqs = <64>;
+			};
+
+		};
+
 		apb@d4000000 {	/* APB */
 			compatible = "mrvl,apb-bus", "simple-bus";
 			#address-cells = <1>;
@@ -39,40 +49,65 @@
 			reg = <0xd4000000 0x00200000>;
 			ranges;
 
+			timer0: timer@d4014000 {
+				compatible = "mrvl,mmp-timer";
+				reg = <0xd4014000 0x100>;
+				interrupts = <13>;
+			};
+
 			uart1: uart@d4017000 {
-				compatible = "mrvl,mmp-uart", "mrvl,pxa-uart";
+				compatible = "mrvl,mmp-uart";
 				reg = <0xd4017000 0x1000>;
 				interrupts = <27>;
 				status = "disabled";
 			};
 
 			uart2: uart@d4018000 {
-				compatible = "mrvl,mmp-uart", "mrvl,pxa-uart";
+				compatible = "mrvl,mmp-uart";
 				reg = <0xd4018000 0x1000>;
 				interrupts = <28>;
 				status = "disabled";
 			};
 
 			uart3: uart@d4026000 {
-				compatible = "mrvl,mmp-uart", "mrvl,pxa-uart";
+				compatible = "mrvl,mmp-uart";
 				reg = <0xd4026000 0x1000>;
 				interrupts = <29>;
 				status = "disabled";
 			};
 
-			gpio: gpio@d4019000 {
-				compatible = "mrvl,mmp-gpio", "mrvl,pxa-gpio";
+			gpio@d4019000 {
+				compatible = "mrvl,mmp-gpio";
+				#address-cells = <1>;
+				#size-cells = <1>;
 				reg = <0xd4019000 0x1000>;
+				gpio-controller;
+				#gpio-cells = <2>;
 				interrupts = <49>;
 				interrupt-names = "gpio_mux";
-				gpio-controller;
-				#gpio-cells = <1>;
 				interrupt-controller;
 				#interrupt-cells = <1>;
+				ranges;
+
+				gcb0: gpio@d4019000 {
+					reg = <0xd4019000 0x4>;
+				};
+
+				gcb1: gpio@d4019004 {
+					reg = <0xd4019004 0x4>;
+				};
+
+				gcb2: gpio@d4019008 {
+					reg = <0xd4019008 0x4>;
+				};
+
+				gcb3: gpio@d4019100 {
+					reg = <0xd4019100 0x4>;
+				};
 			};
 
 			twsi1: i2c@d4011000 {
-				compatible = "mrvl,mmp-twsi", "mrvl,pxa-i2c";
+				compatible = "mrvl,mmp-twsi";
 				reg = <0xd4011000 0x1000>;
 				interrupts = <7>;
 				mrvl,i2c-fast-mode;
@@ -80,7 +115,7 @@
 			};
 
 			twsi2: i2c@d4025000 {
-				compatible = "mrvl,mmp-twsi", "mrvl,pxa-i2c";
+				compatible = "mrvl,mmp-twsi";
 				reg = <0xd4025000 0x1000>;
 				interrupts = <58>;
 				status = "disabled";
diff --git a/arch/arm/boot/dts/pxa910-dkb.dts b/arch/arm/boot/dts/pxa910-dkb.dts
new file mode 100644
index 000000000000..e92be5a474e7
--- /dev/null
+++ b/arch/arm/boot/dts/pxa910-dkb.dts
@@ -0,0 +1,38 @@
+/*
+ *  Copyright (C) 2012 Marvell Technology Group Ltd.
+ *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+/dts-v1/;
+/include/ "pxa910.dtsi"
+
+/ {
+	model = "Marvell PXA910 DKB Development Board";
+	compatible = "mrvl,pxa910-dkb", "mrvl,pxa910";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 root=/dev/nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on";
+	};
+
+	memory {
+		reg = <0x00000000 0x10000000>;
+	};
+
+	soc {
+		apb@d4000000 {
+			uart1: uart@d4017000 {
+				status = "okay";
+			};
+			twsi1: i2c@d4011000 {
+				status = "okay";
+			};
+			rtc: rtc@d4010000 {
+				status = "okay";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/pxa910.dtsi b/arch/arm/boot/dts/pxa910.dtsi
new file mode 100644
index 000000000000..aebf32de73b4
--- /dev/null
+++ b/arch/arm/boot/dts/pxa910.dtsi
@@ -0,0 +1,140 @@
+/*
+ *  Copyright (C) 2012 Marvell Technology Group Ltd.
+ *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	aliases {
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		i2c0 = &twsi1;
+		i2c1 = &twsi2;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&intc>;
+		ranges;
+
+		axi@d4200000 {	/* AXI */
+			compatible = "mrvl,axi-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xd4200000 0x00200000>;
+			ranges;
+
+			intc: interrupt-controller@d4282000 {
+				compatible = "mrvl,mmp-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0xd4282000 0x1000>;
+				mrvl,intc-nr-irqs = <64>;
+			};
+
+		};
+
+		apb@d4000000 {	/* APB */
+			compatible = "mrvl,apb-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xd4000000 0x00200000>;
+			ranges;
+
+			timer0: timer@d4014000 {
+				compatible = "mrvl,mmp-timer";
+				reg = <0xd4014000 0x100>;
+				interrupts = <13>;
+			};
+
+			timer1: timer@d4016000 {
+				compatible = "mrvl,mmp-timer";
+				reg = <0xd4016000 0x100>;
+				interrupts = <29>;
+				status = "disabled";
+			};
+
+			uart1: uart@d4017000 {
+				compatible = "mrvl,mmp-uart";
+				reg = <0xd4017000 0x1000>;
+				interrupts = <27>;
+				status = "disabled";
+			};
+
+			uart2: uart@d4018000 {
+				compatible = "mrvl,mmp-uart";
+				reg = <0xd4018000 0x1000>;
+				interrupts = <28>;
+				status = "disabled";
+			};
+
+			uart3: uart@d4036000 {
+				compatible = "mrvl,mmp-uart";
+				reg = <0xd4036000 0x1000>;
+				interrupts = <59>;
+				status = "disabled";
+			};
+
+			gpio@d4019000 {
+				compatible = "mrvl,mmp-gpio";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xd4019000 0x1000>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupts = <49>;
+				interrupt-names = "gpio_mux";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				ranges;
+
+				gcb0: gpio@d4019000 {
+					reg = <0xd4019000 0x4>;
+				};
+
+				gcb1: gpio@d4019004 {
+					reg = <0xd4019004 0x4>;
+				};
+
+				gcb2: gpio@d4019008 {
+					reg = <0xd4019008 0x4>;
+				};
+
+				gcb3: gpio@d4019100 {
+					reg = <0xd4019100 0x4>;
+				};
+			};
+
+			twsi1: i2c@d4011000 {
+				compatible = "mrvl,mmp-twsi";
+				reg = <0xd4011000 0x1000>;
+				interrupts = <7>;
+				mrvl,i2c-fast-mode;
+				status = "disabled";
+			};
+
+			twsi2: i2c@d4037000 {
+				compatible = "mrvl,mmp-twsi";
+				reg = <0xd4037000 0x1000>;
+				interrupts = <54>;
+				status = "disabled";
+			};
+
+			rtc: rtc@d4010000 {
+				compatible = "mrvl,mmp-rtc";
+				reg = <0xd4010000 0x1000>;
+				interrupts = <5 6>;
+				interrupt-names = "rtc 1Hz", "rtc alarm";
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
new file mode 100644
index 000000000000..a7505a95a3b7
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
@@ -0,0 +1,22 @@
+/*
+ * Device Tree Source for the armadillo 800 eva board
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+/include/ "skeleton.dtsi"
+
+/ {
+	model = "armadillo 800 eva";
+	compatible = "renesas,armadillo800eva";
+
+	memory {
+		device_type = "memory";
+		reg = <0x40000000 0x20000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/sh7372.dtsi b/arch/arm/boot/dts/sh7372.dtsi
new file mode 100644
index 000000000000..677fc603f8b3
--- /dev/null
+++ b/arch/arm/boot/dts/sh7372.dtsi
@@ -0,0 +1,21 @@
+/*
+ * Device Tree Source for the sh7372 SoC
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "renesas,sh7372";
+
+	cpus {
+		cpu@0 {
+			compatible = "arm,cortex-a8";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sh73a0-kzm9g.dts b/arch/arm/boot/dts/sh73a0-kzm9g.dts
new file mode 100644
index 000000000000..bcb911951978
--- /dev/null
+++ b/arch/arm/boot/dts/sh73a0-kzm9g.dts
@@ -0,0 +1,22 @@
+/*
+ * Device Tree Source for the KZM-A9-GT board
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+/include/ "skeleton.dtsi"
+
+/ {
+	model = "KZM-A9-GT";
+	compatible = "renesas,kzm9g", "renesas,sh73a0";
+
+	memory {
+		device_type = "memory";
+		reg = <0x41000000 0x1e800000>;
+	};
+};
diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts
index 359c6d679156..ec3c33975110 100644
--- a/arch/arm/boot/dts/snowball.dts
+++ b/arch/arm/boot/dts/snowball.dts
@@ -20,6 +20,16 @@
 		reg = <0x00000000 0x20000000>;
 	};
 
+	en_3v3_reg: en_3v3 {
+		compatible = "regulator-fixed";
+                regulator-name = "en-3v3-fixed-supply";
+                regulator-min-microvolt = <3300000>;
+                regulator-max-microvolt = <3300000>;
+                gpios = <&gpio0 26  0x4>; // 26
+                startup-delay-us = <5000>;
+                enable-active-high;
+	};
+
 	gpio_keys {
 		compatible = "gpio-keys";
 		#address-cells = <1>;
@@ -30,35 +40,35 @@
 			wakeup = <1>;
 			linux,code = <2>;
 			label = "userpb";
-			gpios = <&gpio1 0>;
+			gpios = <&gpio1 0 0x4>;
 		};
 		button@2 {
 			debounce_interval = <50>;
 			wakeup = <1>;
 			linux,code = <3>;
-			label = "userpb";
-			gpios = <&gpio4 23>;
+			label = "extkb1";
+			gpios = <&gpio4 23 0x4>;
 		};
 		button@3 {
 			debounce_interval = <50>;
 			wakeup = <1>;
 			linux,code = <4>;
-			label = "userpb";
-			gpios = <&gpio4 23>;
+			label = "extkb2";
+			gpios = <&gpio4 24 0x4>;
 		};
 		button@4 {
 			debounce_interval = <50>;
 			wakeup = <1>;
 			linux,code = <5>;
-			label = "userpb";
-			gpios = <&gpio5 1>;
+			label = "extkb3";
+			gpios = <&gpio5 1 0x4>;
 		};
 		button@5 {
 			debounce_interval = <50>;
 			wakeup = <1>;
 			linux,code = <6>;
-			label = "userpb";
-			gpios = <&gpio5 2>;
+			label = "extkb4";
+			gpios = <&gpio5 2 0x4>;
 		};
 	};
 
@@ -66,34 +76,40 @@
 		compatible = "gpio-leds";
 		used-led {
 			label = "user_led";
-			gpios = <&gpio4 14>;
+			gpios = <&gpio4 14 0x4>;
 		};
 	};
 
 	soc-u9500 {
-
 		external-bus@50000000 {
-			compatible = "simple-bus";
-			reg = <0x50000000 0x10000000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			ethernet@50000000 {
-				compatible = "smsc,9111";
-				reg = <0x50000000 0x10000>;
-				interrupts = <12>;
+			status = "okay";
+
+			ethernet@0 {
+				compatible = "smsc,lan9115";
+				reg = <0 0x10000>;
+				interrupts = <12 0x1>;
 				interrupt-parent = <&gpio4>;
+				vdd33a-supply = <&en_3v3_reg>;
+				vddvario-supply = <&db8500_vape_reg>;
+
+
+				reg-shift = <1>;
+				reg-io-width = <2>;
+				smsc,force-internal-phy;
+				smsc,irq-active-high;
+				smsc,irq-push-pull;
 			};
 		};
 
 		sdi@80126000 {
 			status = "enabled";
-			cd-gpios = <&gpio6 26>;
+			vmmc-supply = <&ab8500_ldo_aux3_reg>;
+			cd-gpios  = <&gpio6 26 0x4>; // 218
 		};
 
 		sdi@80114000 {
 			status = "enabled";
+			vmmc-supply = <&ab8500_ldo_aux2_reg>;
 		};
 
 		uart@80120000 {
@@ -112,7 +128,7 @@
 			tc3589x@42 {
 				//compatible = "tc3589x";
 				reg = <0x42>;
-				interrupts = <25>;
+				gpios = <&gpio6 25 0x4>;
 				interrupt-parent = <&gpio6>;
 			};
 			tps61052@33 {
diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts
new file mode 100644
index 000000000000..8314e4171884
--- /dev/null
+++ b/arch/arm/boot/dts/spear1310-evb.dts
@@ -0,0 +1,292 @@
+/*
+ * DTS file for SPEAr1310 Evaluation Baord
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "spear1310.dtsi"
+
+/ {
+	model = "ST SPEAr1310 Evaluation Board";
+	compatible = "st,spear1310-evb", "st,spear1310";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory {
+		reg = <0 0x40000000>;
+	};
+
+	ahb {
+		pinmux@e0700000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				i2c0-pmx {
+					st,pins = "i2c0_grp";
+					st,function = "i2c0";
+				};
+				i2s1 {
+					st,pins = "i2s1_grp";
+					st,function = "i2s1";
+				};
+				gpio {
+					st,pins = "arm_gpio_grp";
+					st,function = "arm_gpio";
+				};
+				eth {
+					st,pins = "gmii_grp";
+					st,function = "gmii";
+				};
+				ssp0 {
+					st,pins = "ssp0_grp";
+					st,function = "ssp0";
+				};
+				kbd {
+					st,pins = "keyboard_6x6_grp";
+					st,function = "keyboard";
+				};
+				sdhci {
+					st,pins = "sdhci_grp";
+					st,function = "sdhci";
+				};
+				smi-pmx {
+					st,pins = "smi_2_chips_grp";
+					st,function = "smi";
+				};
+				uart0 {
+					st,pins = "uart0_grp";
+					st,function = "uart0";
+				};
+				rs485 {
+					st,pins = "rs485_0_1_tdm_0_1_grp";
+					st,function = "rs485_0_1_tdm_0_1";
+				};
+				i2c1_2 {
+					st,pins = "i2c_1_2_grp";
+					st,function = "i2c_1_2";
+				};
+				pci {
+					st,pins = "pcie0_grp","pcie1_grp",
+						"pcie2_grp";
+					st,function = "pci";
+				};
+				smii {
+					st,pins = "smii_0_1_2_grp";
+					st,function = "smii_0_1_2";
+				};
+				nand {
+					st,pins = "nand_8bit_grp",
+						"nand_16bit_grp";
+					st,function = "nand";
+				};
+			};
+		};
+
+		ahci@b1000000 {
+			status = "okay";
+		};
+
+		cf@b2800000 {
+			status = "okay";
+		};
+
+		dma@ea800000 {
+			status = "okay";
+		};
+
+		dma@eb000000 {
+			status = "okay";
+		};
+
+		fsmc: flash@b0000000 {
+			status = "okay";
+		};
+
+		gmac0: eth@e2000000 {
+			status = "okay";
+		};
+
+		sdhci@b3000000 {
+			status = "okay";
+		};
+
+		smi: flash@ea000000 {
+			status = "okay";
+			clock-rate=<50000000>;
+
+			flash@e6000000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xe6000000 0x800000>;
+				st,smi-fast-mode;
+
+				partition@0 {
+					label = "xloader";
+					reg = <0x0 0x10000>;
+				};
+				partition@10000 {
+					label = "u-boot";
+					reg = <0x10000 0x40000>;
+				};
+				partition@50000 {
+					label = "linux";
+					reg = <0x50000 0x2c0000>;
+				};
+				partition@310000 {
+					label = "rootfs";
+					reg = <0x310000 0x4f0000>;
+				};
+			};
+		};
+
+		spi0: spi@e0100000 {
+			status = "okay";
+		};
+
+		ehci@e4800000 {
+			status = "okay";
+		};
+
+		ehci@e5800000 {
+			status = "okay";
+		};
+
+		ohci@e4000000 {
+			status = "okay";
+		};
+
+		ohci@e5000000 {
+			status = "okay";
+		};
+
+		apb {
+			adc@e0080000 {
+				status = "okay";
+			};
+
+			gpio0: gpio@e0600000 {
+			       status = "okay";
+			};
+
+			gpio1: gpio@e0680000 {
+			       status = "okay";
+			};
+
+			i2c0: i2c@e0280000 {
+			       status = "okay";
+			};
+
+			i2c1: i2c@5cd00000 {
+			       status = "okay";
+			};
+
+			kbd@e0300000 {
+				linux,keymap = < 0x00000001
+						 0x00010002
+						 0x00020003
+						 0x00030004
+						 0x00040005
+						 0x00050006
+						 0x00060007
+						 0x00070008
+						 0x00080009
+						 0x0100000a
+						 0x0101000c
+						 0x0102000d
+						 0x0103000e
+						 0x0104000f
+						 0x01050010
+						 0x01060011
+						 0x01070012
+						 0x01080013
+						 0x02000014
+						 0x02010015
+						 0x02020016
+						 0x02030017
+						 0x02040018
+						 0x02050019
+						 0x0206001a
+						 0x0207001b
+						 0x0208001c
+						 0x0300001d
+						 0x0301001e
+						 0x0302001f
+						 0x03030020
+						 0x03040021
+						 0x03050022
+						 0x03060023
+						 0x03070024
+						 0x03080025
+						 0x04000026
+						 0x04010027
+						 0x04020028
+						 0x04030029
+						 0x0404002a
+						 0x0405002b
+						 0x0406002c
+						 0x0407002d
+						 0x0408002e
+						 0x0500002f
+						 0x05010030
+						 0x05020031
+						 0x05030032
+						 0x05040033
+						 0x05050034
+						 0x05060035
+						 0x05070036
+						 0x05080037
+						 0x06000038
+						 0x06010039
+						 0x0602003a
+						 0x0603003b
+						 0x0604003c
+						 0x0605003d
+						 0x0606003e
+						 0x0607003f
+						 0x06080040
+						 0x07000041
+						 0x07010042
+						 0x07020043
+						 0x07030044
+						 0x07040045
+						 0x07050046
+						 0x07060047
+						 0x07070048
+						 0x07080049
+						 0x0800004a
+						 0x0801004b
+						 0x0802004c
+						 0x0803004d
+						 0x0804004e
+						 0x0805004f
+						 0x08060050
+						 0x08070051
+						 0x08080052 >;
+			       autorepeat;
+			       st,mode = <0>;
+			       status = "okay";
+			};
+
+			rtc@e0580000 {
+			       status = "okay";
+			};
+
+			serial@e0000000 {
+			       status = "okay";
+			};
+
+			wdt@ec800620 {
+			       status = "okay";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/spear1310.dtsi b/arch/arm/boot/dts/spear1310.dtsi
new file mode 100644
index 000000000000..9e61da404d57
--- /dev/null
+++ b/arch/arm/boot/dts/spear1310.dtsi
@@ -0,0 +1,184 @@
+/*
+ * DTS file for all SPEAr1310 SoCs
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "spear13xx.dtsi"
+
+/ {
+	compatible = "st,spear1310";
+
+	ahb {
+		ahci@b1000000 {
+			compatible = "snps,spear-ahci";
+			reg = <0xb1000000 0x10000>;
+			interrupts = <0 68 0x4>;
+			status = "disabled";
+		};
+
+		ahci@b1800000 {
+			compatible = "snps,spear-ahci";
+			reg = <0xb1800000 0x10000>;
+			interrupts = <0 69 0x4>;
+			status = "disabled";
+		};
+
+		ahci@b4000000 {
+			compatible = "snps,spear-ahci";
+			reg = <0xb4000000 0x10000>;
+			interrupts = <0 70 0x4>;
+			status = "disabled";
+		};
+
+		gmac1: eth@5c400000 {
+			compatible = "st,spear600-gmac";
+			reg = <0x5c400000 0x8000>;
+			interrupts = <0 95 0x4>;
+			interrupt-names = "macirq";
+			status = "disabled";
+		};
+
+		gmac2: eth@5c500000 {
+			compatible = "st,spear600-gmac";
+			reg = <0x5c500000 0x8000>;
+			interrupts = <0 96 0x4>;
+			interrupt-names = "macirq";
+			status = "disabled";
+		};
+
+		gmac3: eth@5c600000 {
+			compatible = "st,spear600-gmac";
+			reg = <0x5c600000 0x8000>;
+			interrupts = <0 97 0x4>;
+			interrupt-names = "macirq";
+			status = "disabled";
+		};
+
+		gmac4: eth@5c700000 {
+			compatible = "st,spear600-gmac";
+			reg = <0x5c700000 0x8000>;
+			interrupts = <0 98 0x4>;
+			interrupt-names = "macirq";
+			status = "disabled";
+		};
+
+		spi1: spi@5d400000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x5d400000 0x1000>;
+			interrupts = <0 99 0x4>;
+			status = "disabled";
+		};
+
+		apb {
+			i2c1: i2c@5cd00000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0x5cd00000 0x1000>;
+				interrupts = <0 87 0x4>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@5ce00000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0x5ce00000 0x1000>;
+				interrupts = <0 88 0x4>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@5cf00000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0x5cf00000 0x1000>;
+				interrupts = <0 89 0x4>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@5d000000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0x5d000000 0x1000>;
+				interrupts = <0 90 0x4>;
+				status = "disabled";
+			};
+
+			i2c5: i2c@5d100000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0x5d100000 0x1000>;
+				interrupts = <0 91 0x4>;
+				status = "disabled";
+			};
+
+			i2c6: i2c@5d200000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0x5d200000 0x1000>;
+				interrupts = <0 92 0x4>;
+				status = "disabled";
+			};
+
+			i2c7: i2c@5d300000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0x5d300000 0x1000>;
+				interrupts = <0 93 0x4>;
+				status = "disabled";
+			};
+
+			serial@5c800000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x5c800000 0x1000>;
+				interrupts = <0 82 0x4>;
+				status = "disabled";
+			};
+
+			serial@5c900000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x5c900000 0x1000>;
+				interrupts = <0 83 0x4>;
+				status = "disabled";
+			};
+
+			serial@5ca00000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x5ca00000 0x1000>;
+				interrupts = <0 84 0x4>;
+				status = "disabled";
+			};
+
+			serial@5cb00000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x5cb00000 0x1000>;
+				interrupts = <0 85 0x4>;
+				status = "disabled";
+			};
+
+			serial@5cc00000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x5cc00000 0x1000>;
+				interrupts = <0 86 0x4>;
+				status = "disabled";
+			};
+
+			thermal@e07008c4 {
+				st,thermal-flags = <0x7000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/spear1340-evb.dts
new file mode 100644
index 000000000000..0d8472e5ab9f
--- /dev/null
+++ b/arch/arm/boot/dts/spear1340-evb.dts
@@ -0,0 +1,308 @@
+/*
+ * DTS file for SPEAr1340 Evaluation Baord
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "spear1340.dtsi"
+
+/ {
+	model = "ST SPEAr1340 Evaluation Board";
+	compatible = "st,spear1340-evb", "st,spear1340";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory {
+		reg = <0 0x40000000>;
+	};
+
+	ahb {
+		pinmux@e0700000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				pads_as_gpio {
+					st,pins = "pads_as_gpio_grp";
+					st,function = "pads_as_gpio";
+				};
+				fsmc {
+					st,pins = "fsmc_8bit_grp";
+					st,function = "fsmc";
+				};
+				kbd {
+					st,pins = "keyboard_row_col_grp",
+						"keyboard_col5_grp";
+					st,function = "keyboard";
+				};
+				uart0 {
+					st,pins = "uart0_grp", "uart0_enh_grp";
+					st,function = "uart0";
+				};
+				i2c0-pmx {
+					st,pins = "i2c0_grp";
+					st,function = "i2c0";
+				};
+				i2c1-pmx {
+					st,pins = "i2c1_grp";
+					st,function = "i2c1";
+				};
+				spdif-in {
+					st,pins = "spdif_in_grp";
+					st,function = "spdif_in";
+				};
+				spdif-out {
+					st,pins = "spdif_out_grp";
+					st,function = "spdif_out";
+				};
+				ssp0 {
+					st,pins = "ssp0_grp", "ssp0_cs1_grp",
+						"ssp0_cs3_grp";
+					st,function = "ssp0";
+				};
+				pwm {
+					st,pins = "pwm2_grp", "pwm3_grp";
+					st,function = "pwm";
+				};
+				smi-pmx {
+					st,pins = "smi_grp";
+					st,function = "smi";
+				};
+				i2s {
+					st,pins = "i2s_in_grp", "i2s_out_grp";
+					st,function = "i2s";
+				};
+				gmac {
+					st,pins = "gmii_grp", "rgmii_grp";
+					st,function = "gmac";
+				};
+				cam3 {
+					st,pins = "cam3_grp";
+					st,function = "cam3";
+				};
+				cec0 {
+					st,pins = "cec0_grp";
+					st,function = "cec0";
+				};
+				cec1 {
+					st,pins = "cec1_grp";
+					st,function = "cec1";
+				};
+				sdhci {
+					st,pins = "sdhci_grp";
+					st,function = "sdhci";
+				};
+				clcd {
+					st,pins = "clcd_grp";
+					st,function = "clcd";
+				};
+				sata {
+					st,pins = "sata_grp";
+					st,function = "sata";
+				};
+			};
+		};
+
+		dma@ea800000 {
+			status = "okay";
+		};
+
+		dma@eb000000 {
+			status = "okay";
+		};
+
+		fsmc: flash@b0000000 {
+			status = "okay";
+		};
+
+		gmac0: eth@e2000000 {
+			status = "okay";
+		};
+
+		sdhci@b3000000 {
+			status = "okay";
+		};
+
+		smi: flash@ea000000 {
+			status = "okay";
+			clock-rate=<50000000>;
+
+			flash@e6000000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xe6000000 0x800000>;
+				st,smi-fast-mode;
+
+				partition@0 {
+					label = "xloader";
+					reg = <0x0 0x10000>;
+				};
+				partition@10000 {
+					label = "u-boot";
+					reg = <0x10000 0x40000>;
+				};
+				partition@50000 {
+					label = "linux";
+					reg = <0x50000 0x2c0000>;
+				};
+				partition@310000 {
+					label = "rootfs";
+					reg = <0x310000 0x4f0000>;
+				};
+			};
+		};
+
+		spi0: spi@e0100000 {
+			status = "okay";
+		};
+
+		ehci@e4800000 {
+			status = "okay";
+		};
+
+		ehci@e5800000 {
+			status = "okay";
+		};
+
+		ohci@e4000000 {
+			status = "okay";
+		};
+
+		ohci@e5000000 {
+			status = "okay";
+		};
+
+		apb {
+			adc@e0080000 {
+				status = "okay";
+			};
+
+			gpio0: gpio@e0600000 {
+			       status = "okay";
+			};
+
+			gpio1: gpio@e0680000 {
+			       status = "okay";
+			};
+
+			i2c0: i2c@e0280000 {
+			       status = "okay";
+			};
+
+			i2c1: i2c@b4000000 {
+			       status = "okay";
+			};
+
+			kbd@e0300000 {
+				linux,keymap = < 0x00000001
+						 0x00010002
+						 0x00020003
+						 0x00030004
+						 0x00040005
+						 0x00050006
+						 0x00060007
+						 0x00070008
+						 0x00080009
+						 0x0100000a
+						 0x0101000c
+						 0x0102000d
+						 0x0103000e
+						 0x0104000f
+						 0x01050010
+						 0x01060011
+						 0x01070012
+						 0x01080013
+						 0x02000014
+						 0x02010015
+						 0x02020016
+						 0x02030017
+						 0x02040018
+						 0x02050019
+						 0x0206001a
+						 0x0207001b
+						 0x0208001c
+						 0x0300001d
+						 0x0301001e
+						 0x0302001f
+						 0x03030020
+						 0x03040021
+						 0x03050022
+						 0x03060023
+						 0x03070024
+						 0x03080025
+						 0x04000026
+						 0x04010027
+						 0x04020028
+						 0x04030029
+						 0x0404002a
+						 0x0405002b
+						 0x0406002c
+						 0x0407002d
+						 0x0408002e
+						 0x0500002f
+						 0x05010030
+						 0x05020031
+						 0x05030032
+						 0x05040033
+						 0x05050034
+						 0x05060035
+						 0x05070036
+						 0x05080037
+						 0x06000038
+						 0x06010039
+						 0x0602003a
+						 0x0603003b
+						 0x0604003c
+						 0x0605003d
+						 0x0606003e
+						 0x0607003f
+						 0x06080040
+						 0x07000041
+						 0x07010042
+						 0x07020043
+						 0x07030044
+						 0x07040045
+						 0x07050046
+						 0x07060047
+						 0x07070048
+						 0x07080049
+						 0x0800004a
+						 0x0801004b
+						 0x0802004c
+						 0x0803004d
+						 0x0804004e
+						 0x0805004f
+						 0x08060050
+						 0x08070051
+						 0x08080052 >;
+			       autorepeat;
+			       st,mode = <0>;
+			       status = "okay";
+			};
+
+			rtc@e0580000 {
+			       status = "okay";
+			};
+
+			serial@e0000000 {
+			       status = "okay";
+			};
+
+			serial@b4100000 {
+			       status = "okay";
+			};
+
+			wdt@ec800620 {
+			       status = "okay";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi
new file mode 100644
index 000000000000..a26fc47a55e8
--- /dev/null
+++ b/arch/arm/boot/dts/spear1340.dtsi
@@ -0,0 +1,56 @@
+/*
+ * DTS file for all SPEAr1340 SoCs
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "spear13xx.dtsi"
+
+/ {
+	compatible = "st,spear1340";
+
+	ahb {
+		ahci@b1000000 {
+			compatible = "snps,spear-ahci";
+			reg = <0xb1000000 0x10000>;
+			interrupts = <0 72 0x4>;
+			status = "disabled";
+		};
+
+		spi1: spi@5d400000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x5d400000 0x1000>;
+			interrupts = <0 99 0x4>;
+			status = "disabled";
+		};
+
+		apb {
+			i2c1: i2c@b4000000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0xb4000000 0x1000>;
+				interrupts = <0 104 0x4>;
+				status = "disabled";
+			};
+
+			serial@b4100000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xb4100000 0x1000>;
+				interrupts = <0 105 0x4>;
+				status = "disabled";
+			};
+
+			thermal@e07008c4 {
+				st,thermal-flags = <0x2a00>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi
new file mode 100644
index 000000000000..1f8e1e1481df
--- /dev/null
+++ b/arch/arm/boot/dts/spear13xx.dtsi
@@ -0,0 +1,262 @@
+/*
+ * DTS file for all SPEAr13xx SoCs
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	gic: interrupt-controller@ec801000 {
+		compatible = "arm,cortex-a9-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		reg = < 0xec801000 0x1000 >,
+		      < 0xec800100 0x0100 >;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <0 8 0x04
+			      0 9 0x04>;
+	};
+
+	L2: l2-cache {
+		    compatible = "arm,pl310-cache";
+		    reg = <0xed000000 0x1000>;
+		    cache-unified;
+		    cache-level = <2>;
+	};
+
+	memory {
+		name = "memory";
+		device_type = "memory";
+		reg = <0 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyAMA0,115200";
+	};
+
+	ahb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0x50000000 0x50000000 0x10000000
+			  0xb0000000 0xb0000000 0x10000000
+			  0xe0000000 0xe0000000 0x10000000>;
+
+		sdhci@b3000000 {
+			compatible = "st,sdhci-spear";
+			reg = <0xb3000000 0x100>;
+			interrupts = <0 28 0x4>;
+			status = "disabled";
+		};
+
+		cf@b2800000 {
+			compatible = "arasan,cf-spear1340";
+			reg = <0xb2800000 0x100>;
+			interrupts = <0 29 0x4>;
+			status = "disabled";
+		};
+
+		dma@ea800000 {
+			compatible = "snps,dma-spear1340";
+			reg = <0xea800000 0x1000>;
+			interrupts = <0 19 0x4>;
+			status = "disabled";
+		};
+
+		dma@eb000000 {
+			compatible = "snps,dma-spear1340";
+			reg = <0xeb000000 0x1000>;
+			interrupts = <0 59 0x4>;
+			status = "disabled";
+		};
+
+		fsmc: flash@b0000000 {
+			compatible = "st,spear600-fsmc-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xb0000000 0x1000	/* FSMC Register */
+			       0xb0800000 0x0010>;	/* NAND Base */
+			reg-names = "fsmc_regs", "nand_data";
+			interrupts = <0 20 0x4
+				      0 21 0x4
+				      0 22 0x4
+				      0 23 0x4>;
+			st,ale-off = <0x20000>;
+			st,cle-off = <0x10000>;
+			status = "disabled";
+		};
+
+		gmac0: eth@e2000000 {
+			compatible = "st,spear600-gmac";
+			reg = <0xe2000000 0x8000>;
+			interrupts = <0 23 0x4
+				      0 24 0x4>;
+			interrupt-names = "macirq", "eth_wake_irq";
+			status = "disabled";
+		};
+
+		smi: flash@ea000000 {
+			compatible = "st,spear600-smi";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xea000000 0x1000>;
+			interrupts = <0 30 0x4>;
+			status = "disabled";
+		};
+
+		spi0: spi@e0100000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0xe0100000 0x1000>;
+			interrupts = <0 31 0x4>;
+			status = "disabled";
+		};
+
+		ehci@e4800000 {
+			compatible = "st,spear600-ehci", "usb-ehci";
+			reg = <0xe4800000 0x1000>;
+			interrupts = <0 64 0x4>;
+			status = "disabled";
+		};
+
+		ehci@e5800000 {
+			compatible = "st,spear600-ehci", "usb-ehci";
+			reg = <0xe5800000 0x1000>;
+			interrupts = <0 66 0x4>;
+			status = "disabled";
+		};
+
+		ohci@e4000000 {
+			compatible = "st,spear600-ohci", "usb-ohci";
+			reg = <0xe4000000 0x1000>;
+			interrupts = <0 65 0x4>;
+			status = "disabled";
+		};
+
+		ohci@e5000000 {
+			compatible = "st,spear600-ohci", "usb-ohci";
+			reg = <0xe5000000 0x1000>;
+			interrupts = <0 67 0x4>;
+			status = "disabled";
+		};
+
+		apb {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0x50000000 0x50000000 0x10000000
+				  0xb0000000 0xb0000000 0x10000000
+				  0xe0000000 0xe0000000 0x10000000>;
+
+			gpio0: gpio@e0600000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xe0600000 0x1000>;
+				interrupts = <0 24 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			gpio1: gpio@e0680000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xe0680000 0x1000>;
+				interrupts = <0 25 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			kbd@e0300000 {
+				compatible = "st,spear300-kbd";
+				reg = <0xe0300000 0x1000>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@e0280000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0xe0280000 0x1000>;
+				interrupts = <0 41 0x4>;
+				status = "disabled";
+			};
+
+			rtc@e0580000 {
+				compatible = "st,spear-rtc";
+				reg = <0xe0580000 0x1000>;
+				interrupts = <0 36 0x4>;
+				status = "disabled";
+			};
+
+			serial@e0000000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xe0000000 0x1000>;
+				interrupts = <0 36 0x4>;
+				status = "disabled";
+			};
+
+			adc@e0080000 {
+				compatible = "st,spear600-adc";
+				reg = <0xe0080000 0x1000>;
+				interrupts = <0 44 0x4>;
+				status = "disabled";
+			};
+
+			timer@e0380000 {
+				compatible = "st,spear-timer";
+				reg = <0xe0380000 0x400>;
+				interrupts = <0 37 0x4>;
+			};
+
+			timer@ec800600 {
+				compatible = "arm,cortex-a9-twd-timer";
+				reg = <0xec800600 0x20>;
+				interrupts = <1 13 0x301>;
+			};
+
+			wdt@ec800620 {
+				compatible = "arm,cortex-a9-twd-wdt";
+				reg = <0xec800620 0x20>;
+				status = "disabled";
+			};
+
+			thermal@e07008c4 {
+				compatible = "st,thermal-spear1340";
+				reg = <0xe07008c4 0x4>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/spear300-evb.dts b/arch/arm/boot/dts/spear300-evb.dts
new file mode 100644
index 000000000000..fc82b1a26458
--- /dev/null
+++ b/arch/arm/boot/dts/spear300-evb.dts
@@ -0,0 +1,246 @@
+/*
+ * DTS file for SPEAr300 Evaluation Baord
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "spear300.dtsi"
+
+/ {
+	model = "ST SPEAr300 Evaluation Board";
+	compatible = "st,spear300-evb", "st,spear300";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory {
+		reg = <0 0x40000000>;
+	};
+
+	ahb {
+		pinmux@99000000 {
+			st,pinmux-mode = <2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				i2c0 {
+					st,pins = "i2c0_grp";
+					st,function = "i2c0";
+				};
+				ssp0 {
+					st,pins = "ssp0_grp";
+					st,function = "ssp0";
+				};
+				mii0 {
+					st,pins = "mii0_grp";
+					st,function = "mii0";
+				};
+				uart0 {
+					st,pins = "uart0_grp";
+					st,function = "uart0";
+				};
+				clcd {
+					st,pins = "clcd_pfmode_grp";
+					st,function = "clcd";
+				};
+				sdhci {
+					st,pins = "sdhci_4bit_grp";
+					st,function = "sdhci";
+				};
+				gpio1 {
+					st,pins = "gpio1_4_to_7_grp",
+						"gpio1_0_to_3_grp";
+					st,function = "gpio1";
+				};
+			};
+		};
+
+		clcd@60000000 {
+			status = "okay";
+		};
+
+		dma@fc400000 {
+			status = "okay";
+		};
+
+		fsmc: flash@94000000 {
+			status = "okay";
+		};
+
+		gmac: eth@e0800000 {
+			status = "okay";
+		};
+
+		sdhci@70000000 {
+			int-gpio = <&gpio1 0 0>;
+			power-gpio = <&gpio1 2 1>;
+			status = "okay";
+		};
+
+		smi: flash@fc000000 {
+			status = "okay";
+			clock-rate=<50000000>;
+
+			flash@f8000000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xf8000000 0x800000>;
+				st,smi-fast-mode;
+
+				partition@0 {
+					label = "xloader";
+					reg = <0x0 0x10000>;
+				};
+				partition@10000 {
+					label = "u-boot";
+					reg = <0x10000 0x40000>;
+				};
+				partition@50000 {
+					label = "linux";
+					reg = <0x50000 0x2c0000>;
+				};
+				partition@310000 {
+					label = "rootfs";
+					reg = <0x310000 0x4f0000>;
+				};
+			};
+		};
+
+		spi0: spi@d0100000 {
+			status = "okay";
+		};
+
+		ehci@e1800000 {
+			status = "okay";
+		};
+
+		ohci@e1900000 {
+			status = "okay";
+		};
+
+		ohci@e2100000 {
+			status = "okay";
+		};
+
+		apb {
+			gpio0: gpio@fc980000 {
+			       status = "okay";
+			};
+
+			gpio1: gpio@a9000000 {
+			       status = "okay";
+			};
+
+			i2c0: i2c@d0180000 {
+			       status = "okay";
+			};
+
+			kbd@a0000000 {
+				linux,keymap = < 0x00000001
+						 0x00010002
+						 0x00020003
+						 0x00030004
+						 0x00040005
+						 0x00050006
+						 0x00060007
+						 0x00070008
+						 0x00080009
+						 0x0100000a
+						 0x0101000c
+						 0x0102000d
+						 0x0103000e
+						 0x0104000f
+						 0x01050010
+						 0x01060011
+						 0x01070012
+						 0x01080013
+						 0x02000014
+						 0x02010015
+						 0x02020016
+						 0x02030017
+						 0x02040018
+						 0x02050019
+						 0x0206001a
+						 0x0207001b
+						 0x0208001c
+						 0x0300001d
+						 0x0301001e
+						 0x0302001f
+						 0x03030020
+						 0x03040021
+						 0x03050022
+						 0x03060023
+						 0x03070024
+						 0x03080025
+						 0x04000026
+						 0x04010027
+						 0x04020028
+						 0x04030029
+						 0x0404002a
+						 0x0405002b
+						 0x0406002c
+						 0x0407002d
+						 0x0408002e
+						 0x0500002f
+						 0x05010030
+						 0x05020031
+						 0x05030032
+						 0x05040033
+						 0x05050034
+						 0x05060035
+						 0x05070036
+						 0x05080037
+						 0x06000038
+						 0x06010039
+						 0x0602003a
+						 0x0603003b
+						 0x0604003c
+						 0x0605003d
+						 0x0606003e
+						 0x0607003f
+						 0x06080040
+						 0x07000041
+						 0x07010042
+						 0x07020043
+						 0x07030044
+						 0x07040045
+						 0x07050046
+						 0x07060047
+						 0x07070048
+						 0x07080049
+						 0x0800004a
+						 0x0801004b
+						 0x0802004c
+						 0x0803004d
+						 0x0804004e
+						 0x0805004f
+						 0x08060050
+						 0x08070051
+						 0x08080052 >;
+			       autorepeat;
+			       st,mode = <0>;
+			       status = "okay";
+			};
+
+			rtc@fc900000 {
+			       status = "okay";
+			};
+
+			serial@d0000000 {
+			       status = "okay";
+			};
+
+			wdt@fc880000 {
+			       status = "okay";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/spear300.dtsi b/arch/arm/boot/dts/spear300.dtsi
new file mode 100644
index 000000000000..01c5e358fdb2
--- /dev/null
+++ b/arch/arm/boot/dts/spear300.dtsi
@@ -0,0 +1,77 @@
+/*
+ * DTS file for SPEAr300 SoC
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "spear3xx.dtsi"
+
+/ {
+	ahb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0x60000000 0x60000000 0x50000000
+			  0xd0000000 0xd0000000 0x30000000>;
+
+		pinmux@99000000 {
+			compatible = "st,spear300-pinmux";
+			reg = <0x99000000 0x1000>;
+		};
+
+		clcd@60000000 {
+			compatible = "arm,clcd-pl110", "arm,primecell";
+			reg = <0x60000000 0x1000>;
+			interrupts = <30>;
+			status = "disabled";
+		};
+
+		fsmc: flash@94000000 {
+			compatible = "st,spear600-fsmc-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x94000000 0x1000	/* FSMC Register */
+			       0x80000000 0x0010>;	/* NAND Base */
+			reg-names = "fsmc_regs", "nand_data";
+			st,ale-off = <0x20000>;
+			st,cle-off = <0x10000>;
+			status = "disabled";
+		};
+
+		sdhci@70000000 {
+			compatible = "st,sdhci-spear";
+			reg = <0x70000000 0x100>;
+			interrupts = <1>;
+			status = "disabled";
+		};
+
+		apb {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0xa0000000 0xa0000000 0x10000000
+				  0xd0000000 0xd0000000 0x30000000>;
+
+			gpio1: gpio@a9000000 {
+				#gpio-cells = <2>;
+				compatible = "arm,pl061", "arm,primecell";
+				gpio-controller;
+				reg = <0xa9000000 0x1000>;
+				status = "disabled";
+			};
+
+			kbd@a0000000 {
+				compatible = "st,spear300-kbd";
+				reg = <0xa0000000 0x1000>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/spear310-evb.dts b/arch/arm/boot/dts/spear310-evb.dts
new file mode 100644
index 000000000000..dc5e2d445a93
--- /dev/null
+++ b/arch/arm/boot/dts/spear310-evb.dts
@@ -0,0 +1,188 @@
+/*
+ * DTS file for SPEAr310 Evaluation Baord
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "spear310.dtsi"
+
+/ {
+	model = "ST SPEAr310 Evaluation Board";
+	compatible = "st,spear310-evb", "st,spear310";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory {
+		reg = <0 0x40000000>;
+	};
+
+	ahb {
+		pinmux@b4000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				gpio0 {
+					st,pins = "gpio0_pin0_grp",
+						"gpio0_pin1_grp",
+						"gpio0_pin2_grp",
+						"gpio0_pin3_grp",
+						"gpio0_pin4_grp",
+						"gpio0_pin5_grp";
+					st,function = "gpio0";
+				};
+				i2c0 {
+					st,pins = "i2c0_grp";
+					st,function = "i2c0";
+				};
+				mii0 {
+					st,pins = "mii0_grp";
+					st,function = "mii0";
+				};
+				ssp0 {
+					st,pins = "ssp0_grp";
+					st,function = "ssp0";
+				};
+				uart0 {
+					st,pins = "uart0_grp";
+					st,function = "uart0";
+				};
+				emi {
+					st,pins = "emi_cs_0_to_5_grp";
+					st,function = "emi";
+				};
+				fsmc {
+					st,pins = "fsmc_grp";
+					st,function = "fsmc";
+				};
+				uart1 {
+					st,pins = "uart1_grp";
+					st,function = "uart1";
+				};
+				uart2 {
+					st,pins = "uart2_grp";
+					st,function = "uart2";
+				};
+				uart3 {
+					st,pins = "uart3_grp";
+					st,function = "uart3";
+				};
+				uart4 {
+					st,pins = "uart4_grp";
+					st,function = "uart4";
+				};
+				uart5 {
+					st,pins = "uart5_grp";
+					st,function = "uart5";
+				};
+			};
+		};
+
+		dma@fc400000 {
+			status = "okay";
+		};
+
+		fsmc: flash@44000000 {
+			status = "okay";
+		};
+
+		gmac: eth@e0800000 {
+			status = "okay";
+		};
+
+		smi: flash@fc000000 {
+			status = "okay";
+			clock-rate=<50000000>;
+
+			flash@f8000000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xf8000000 0x800000>;
+				st,smi-fast-mode;
+
+				partition@0 {
+					label = "xloader";
+					reg = <0x0 0x10000>;
+				};
+				partition@10000 {
+					label = "u-boot";
+					reg = <0x10000 0x40000>;
+				};
+				partition@50000 {
+					label = "linux";
+					reg = <0x50000 0x2c0000>;
+				};
+				partition@310000 {
+					label = "rootfs";
+					reg = <0x310000 0x4f0000>;
+				};
+			};
+		};
+
+		spi0: spi@d0100000 {
+			status = "okay";
+		};
+
+		ehci@e1800000 {
+			status = "okay";
+		};
+
+		ohci@e1900000 {
+			status = "okay";
+		};
+
+		ohci@e2100000 {
+			status = "okay";
+		};
+
+		apb {
+			gpio0: gpio@fc980000 {
+			       status = "okay";
+			};
+
+			i2c0: i2c@d0180000 {
+			       status = "okay";
+			};
+
+			rtc@fc900000 {
+			       status = "okay";
+			};
+
+			serial@d0000000 {
+			       status = "okay";
+			};
+
+			serial@b2000000 {
+			       status = "okay";
+			};
+
+			serial@b2080000 {
+			       status = "okay";
+			};
+
+			serial@b2100000 {
+			       status = "okay";
+			};
+
+			serial@b2180000 {
+			       status = "okay";
+			};
+
+			serial@b2200000 {
+			       status = "okay";
+			};
+
+			wdt@fc880000 {
+			       status = "okay";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/spear310.dtsi b/arch/arm/boot/dts/spear310.dtsi
new file mode 100644
index 000000000000..e47081c494d9
--- /dev/null
+++ b/arch/arm/boot/dts/spear310.dtsi
@@ -0,0 +1,80 @@
+/*
+ * DTS file for SPEAr310 SoC
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "spear3xx.dtsi"
+
+/ {
+	ahb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0x40000000 0x40000000 0x10000000
+			  0xb0000000 0xb0000000 0x10000000
+			  0xd0000000 0xd0000000 0x30000000>;
+
+		pinmux@b4000000 {
+			compatible = "st,spear310-pinmux";
+			reg = <0xb4000000 0x1000>;
+		};
+
+		fsmc: flash@44000000 {
+			compatible = "st,spear600-fsmc-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x44000000 0x1000	/* FSMC Register */
+			       0x40000000 0x0010>;	/* NAND Base */
+			reg-names = "fsmc_regs", "nand_data";
+			st,ale-off = <0x10000>;
+			st,cle-off = <0x20000>;
+			status = "disabled";
+		};
+
+		apb {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0xb0000000 0xb0000000 0x10000000
+				  0xd0000000 0xd0000000 0x30000000>;
+
+			serial@b2000000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xb2000000 0x1000>;
+				status = "disabled";
+			};
+
+			serial@b2080000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xb2080000 0x1000>;
+				status = "disabled";
+			};
+
+			serial@b2100000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xb2100000 0x1000>;
+				status = "disabled";
+			};
+
+			serial@b2180000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xb2180000 0x1000>;
+				status = "disabled";
+			};
+
+			serial@b2200000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xb2200000 0x1000>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/spear320-evb.dts b/arch/arm/boot/dts/spear320-evb.dts
new file mode 100644
index 000000000000..6308fa3bec1e
--- /dev/null
+++ b/arch/arm/boot/dts/spear320-evb.dts
@@ -0,0 +1,198 @@
+/*
+ * DTS file for SPEAr320 Evaluation Baord
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "spear320.dtsi"
+
+/ {
+	model = "ST SPEAr300 Evaluation Board";
+	compatible = "st,spear300-evb", "st,spear300";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory {
+		reg = <0 0x40000000>;
+	};
+
+	ahb {
+		pinmux@b3000000 {
+			st,pinmux-mode = <3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				i2c0 {
+					st,pins = "i2c0_grp";
+					st,function = "i2c0";
+				};
+				mii0 {
+					st,pins = "mii0_grp";
+					st,function = "mii0";
+				};
+				ssp0 {
+					st,pins = "ssp0_grp";
+					st,function = "ssp0";
+				};
+				uart0 {
+					st,pins = "uart0_grp";
+					st,function = "uart0";
+				};
+				sdhci {
+					st,pins = "sdhci_cd_51_grp";
+					st,function = "sdhci";
+				};
+				i2s {
+					st,pins = "i2s_grp";
+					st,function = "i2s";
+				};
+				uart1 {
+					st,pins = "uart1_grp";
+					st,function = "uart1";
+				};
+				uart2 {
+					st,pins = "uart2_grp";
+					st,function = "uart2";
+				};
+				can0 {
+					st,pins = "can0_grp";
+					st,function = "can0";
+				};
+				can1 {
+					st,pins = "can1_grp";
+					st,function = "can1";
+				};
+				mii2 {
+					st,pins = "mii2_grp";
+					st,function = "mii2";
+				};
+				pwm0_1 {
+					st,pins = "pwm0_1_pin_14_15_grp";
+					st,function = "pwm0_1";
+				};
+				pwm2 {
+					st,pins = "pwm2_pin_13_grp";
+					st,function = "pwm2";
+				};
+			};
+		};
+
+		clcd@90000000 {
+			status = "okay";
+		};
+
+		dma@fc400000 {
+			status = "okay";
+		};
+
+		fsmc: flash@4c000000 {
+			status = "okay";
+		};
+
+		gmac: eth@e0800000 {
+			status = "okay";
+		};
+
+		sdhci@70000000 {
+			power-gpio = <&gpio0 2 1>;
+			power_always_enb;
+			status = "okay";
+		};
+
+		smi: flash@fc000000 {
+			status = "okay";
+			clock-rate=<50000000>;
+
+			flash@f8000000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xf8000000 0x800000>;
+				st,smi-fast-mode;
+
+				partition@0 {
+					label = "xloader";
+					reg = <0x0 0x10000>;
+				};
+				partition@10000 {
+					label = "u-boot";
+					reg = <0x10000 0x40000>;
+				};
+				partition@50000 {
+					label = "linux";
+					reg = <0x50000 0x2c0000>;
+				};
+				partition@310000 {
+					label = "rootfs";
+					reg = <0x310000 0x4f0000>;
+				};
+			};
+		};
+
+		spi0: spi@d0100000 {
+			status = "okay";
+		};
+
+		spi1: spi@a5000000 {
+			status = "okay";
+		};
+
+		spi2: spi@a6000000 {
+			status = "okay";
+		};
+
+		ehci@e1800000 {
+			status = "okay";
+		};
+
+		ohci@e1900000 {
+			status = "okay";
+		};
+
+		ohci@e2100000 {
+			status = "okay";
+		};
+
+		apb {
+			gpio0: gpio@fc980000 {
+			       status = "okay";
+			};
+
+			i2c0: i2c@d0180000 {
+			       status = "okay";
+			};
+
+			i2c1: i2c@a7000000 {
+			       status = "okay";
+			};
+
+			rtc@fc900000 {
+			       status = "okay";
+			};
+
+			serial@d0000000 {
+			       status = "okay";
+			};
+
+			serial@a3000000 {
+			       status = "okay";
+			};
+
+			serial@a4000000 {
+			       status = "okay";
+			};
+
+			wdt@fc880000 {
+			       status = "okay";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/spear320.dtsi b/arch/arm/boot/dts/spear320.dtsi
new file mode 100644
index 000000000000..5372ca399b1f
--- /dev/null
+++ b/arch/arm/boot/dts/spear320.dtsi
@@ -0,0 +1,95 @@
+/*
+ * DTS file for SPEAr320 SoC
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "spear3xx.dtsi"
+
+/ {
+	ahb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0x40000000 0x40000000 0x80000000
+			  0xd0000000 0xd0000000 0x30000000>;
+
+		pinmux@b3000000 {
+			compatible = "st,spear320-pinmux";
+			reg = <0xb3000000 0x1000>;
+		};
+
+		clcd@90000000 {
+			compatible = "arm,clcd-pl110", "arm,primecell";
+			reg = <0x90000000 0x1000>;
+			interrupts = <33>;
+			status = "disabled";
+		};
+
+		fsmc: flash@4c000000 {
+			compatible = "st,spear600-fsmc-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x4c000000 0x1000	/* FSMC Register */
+			       0x50000000 0x0010>;	/* NAND Base */
+			reg-names = "fsmc_regs", "nand_data";
+			st,ale-off = <0x20000>;
+			st,cle-off = <0x10000>;
+			status = "disabled";
+		};
+
+		sdhci@70000000 {
+			compatible = "st,sdhci-spear";
+			reg = <0x70000000 0x100>;
+			interrupts = <29>;
+			status = "disabled";
+		};
+
+		spi1: spi@a5000000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0xa5000000 0x1000>;
+			status = "disabled";
+		};
+
+		spi2: spi@a6000000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0xa6000000 0x1000>;
+			status = "disabled";
+		};
+
+		apb {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0xa0000000 0xa0000000 0x10000000
+				  0xd0000000 0xd0000000 0x30000000>;
+
+			i2c1: i2c@a7000000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0xa7000000 0x1000>;
+				status = "disabled";
+			};
+
+			serial@a3000000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xa3000000 0x1000>;
+				status = "disabled";
+			};
+
+			serial@a4000000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xa4000000 0x1000>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/spear3xx.dtsi b/arch/arm/boot/dts/spear3xx.dtsi
new file mode 100644
index 000000000000..91072553963f
--- /dev/null
+++ b/arch/arm/boot/dts/spear3xx.dtsi
@@ -0,0 +1,150 @@
+/*
+ * DTS file for all SPEAr3xx SoCs
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	interrupt-parent = <&vic>;
+
+	cpus {
+		cpu@0 {
+			compatible = "arm,arm926ejs";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x40000000>;
+	};
+
+	ahb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0xd0000000 0xd0000000 0x30000000>;
+
+		vic: interrupt-controller@f1100000 {
+			compatible = "arm,pl190-vic";
+			interrupt-controller;
+			reg = <0xf1100000 0x1000>;
+			#interrupt-cells = <1>;
+		};
+
+		dma@fc400000 {
+			compatible = "arm,pl080", "arm,primecell";
+			reg = <0xfc400000 0x1000>;
+			interrupt-parent = <&vic>;
+			interrupts = <8>;
+			status = "disabled";
+		};
+
+		gmac: eth@e0800000 {
+			compatible = "st,spear600-gmac";
+			reg = <0xe0800000 0x8000>;
+			interrupts = <23 22>;
+			interrupt-names = "macirq", "eth_wake_irq";
+			status = "disabled";
+		};
+
+		smi: flash@fc000000 {
+			compatible = "st,spear600-smi";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xfc000000 0x1000>;
+			interrupts = <9>;
+			status = "disabled";
+		};
+
+		spi0: spi@d0100000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0xd0100000 0x1000>;
+			interrupts = <20>;
+			status = "disabled";
+		};
+
+		ehci@e1800000 {
+			compatible = "st,spear600-ehci", "usb-ehci";
+			reg = <0xe1800000 0x1000>;
+			interrupts = <26>;
+			status = "disabled";
+		};
+
+		ohci@e1900000 {
+			compatible = "st,spear600-ohci", "usb-ohci";
+			reg = <0xe1900000 0x1000>;
+			interrupts = <25>;
+			status = "disabled";
+		};
+
+		ohci@e2100000 {
+			compatible = "st,spear600-ohci", "usb-ohci";
+			reg = <0xe2100000 0x1000>;
+			interrupts = <27>;
+			status = "disabled";
+		};
+
+		apb {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0xd0000000 0xd0000000 0x30000000>;
+
+			gpio0: gpio@fc980000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xfc980000 0x1000>;
+				interrupts = <11>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@d0180000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0xd0180000 0x1000>;
+				interrupts = <21>;
+				status = "disabled";
+			};
+
+			rtc@fc900000 {
+				compatible = "st,spear-rtc";
+				reg = <0xfc900000 0x1000>;
+				interrupts = <10>;
+				status = "disabled";
+			};
+
+			serial@d0000000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xd0000000 0x1000>;
+				interrupts = <19>;
+				status = "disabled";
+			};
+
+			wdt@fc880000 {
+				compatible = "arm,sp805", "arm,primecell";
+				reg = <0xfc880000 0x1000>;
+				interrupts = <12>;
+				status = "disabled";
+			};
+
+			timer@f0000000 {
+				compatible = "st,spear-timer";
+				reg = <0xf0000000 0x400>;
+				interrupts = <2>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/spear600-evb.dts b/arch/arm/boot/dts/spear600-evb.dts
index 636292e18c90..1119c22c9a82 100644
--- a/arch/arm/boot/dts/spear600-evb.dts
+++ b/arch/arm/boot/dts/spear600-evb.dts
@@ -24,11 +24,44 @@
 	};
 
 	ahb {
+		dma@fc400000 {
+			status = "okay";
+		};
+
 		gmac: ethernet@e0800000 {
 			phy-mode = "gmii";
 			status = "okay";
 		};
 
+		smi: flash@fc000000 {
+			status = "okay";
+			clock-rate=<50000000>;
+
+			flash@f8000000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xf8000000 0x800000>;
+				st,smi-fast-mode;
+
+				partition@0 {
+					label = "xloader";
+					reg = <0x0 0x10000>;
+				};
+				partition@10000 {
+					label = "u-boot";
+					reg = <0x10000 0x40000>;
+				};
+				partition@50000 {
+					label = "linux";
+					reg = <0x50000 0x2c0000>;
+				};
+				partition@310000 {
+					label = "rootfs";
+					reg = <0x310000 0x4f0000>;
+				};
+			};
+		};
+
 		apb {
 			serial@d0000000 {
 				status = "okay";
diff --git a/arch/arm/boot/dts/spear600.dtsi b/arch/arm/boot/dts/spear600.dtsi
index ebe0885a2b98..089f0a42c50e 100644
--- a/arch/arm/boot/dts/spear600.dtsi
+++ b/arch/arm/boot/dts/spear600.dtsi
@@ -45,6 +45,14 @@
 			#interrupt-cells = <1>;
 		};
 
+		dma@fc400000 {
+			compatible = "arm,pl080", "arm,primecell";
+			reg = <0xfc400000 0x1000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <10>;
+			status = "disabled";
+		};
+
 		gmac: ethernet@e0800000 {
 			compatible = "st,spear600-gmac";
 			reg = <0xe0800000 0x8000>;
@@ -169,6 +177,12 @@
 				interrupts = <28>;
 				status = "disabled";
 			};
+
+			timer@f0000000 {
+				compatible = "st,spear-timer";
+				reg = <0xf0000000 0x400>;
+				interrupts = <16>;
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/tegra-cardhu.dts b/arch/arm/boot/dts/tegra-cardhu.dts
index ac3fb7558459..36321bceec46 100644
--- a/arch/arm/boot/dts/tegra-cardhu.dts
+++ b/arch/arm/boot/dts/tegra-cardhu.dts
@@ -7,64 +7,166 @@
 	compatible = "nvidia,cardhu", "nvidia,tegra30";
 
 	memory {
-		reg = < 0x80000000 0x40000000 >;
+		reg = <0x80000000 0x40000000>;
 	};
 
-	serial@70006000 {
-		clock-frequency = < 408000000 >;
-	};
-
-	serial@70006040 {
-		status = "disable";
-	};
-
-	serial@70006200 {
-		status = "disable";
-	};
-
-	serial@70006300 {
-		status = "disable";
+	pinmux {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			sdmmc1_clk_pz0 {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <0>;
+				nvidia,tristate = <0>;
+			};
+			sdmmc1_cmd_pz1 {
+				nvidia,pins =	"sdmmc1_cmd_pz1",
+						"sdmmc1_dat0_py7",
+						"sdmmc1_dat1_py6",
+						"sdmmc1_dat2_py5",
+						"sdmmc1_dat3_py4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <2>;
+				nvidia,tristate = <0>;
+			};
+			sdmmc4_clk_pcc4 {
+				nvidia,pins =	"sdmmc4_clk_pcc4",
+						"sdmmc4_rst_n_pcc3";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <0>;
+				nvidia,tristate = <0>;
+			};
+			sdmmc4_dat0_paa0 {
+				nvidia,pins =	"sdmmc4_dat0_paa0",
+						"sdmmc4_dat1_paa1",
+						"sdmmc4_dat2_paa2",
+						"sdmmc4_dat3_paa3",
+						"sdmmc4_dat4_paa4",
+						"sdmmc4_dat5_paa5",
+						"sdmmc4_dat6_paa6",
+						"sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <2>;
+				nvidia,tristate = <0>;
+			};
+			dap2_fs_pa2 {
+				nvidia,pins =	"dap2_fs_pa2",
+						"dap2_sclk_pa3",
+						"dap2_din_pa4",
+						"dap2_dout_pa5";
+				nvidia,function = "i2s1";
+				nvidia,pull = <0>;
+				nvidia,tristate = <0>;
+			};
+		};
 	};
 
-	serial@70006400 {
-		status = "disable";
+	serial@70006000 {
+		status = "okay";
+		clock-frequency = <408000000>;
 	};
 
 	i2c@7000c000 {
+		status = "okay";
 		clock-frequency = <100000>;
 	};
 
 	i2c@7000c400 {
+		status = "okay";
 		clock-frequency = <100000>;
 	};
 
 	i2c@7000c500 {
+		status = "okay";
 		clock-frequency = <100000>;
+
+		/* ALS and Proximity sensor */
+		isl29028@44 {
+			compatible = "isil,isl29028";
+			reg = <0x44>;
+			interrupt-parent = <&gpio>;
+			interrupts = <88 0x04>; /*gpio PL0 */
+		};
 	};
 
 	i2c@7000c700 {
+		status = "okay";
 		clock-frequency = <100000>;
 	};
 
 	i2c@7000d000 {
+		status = "okay";
 		clock-frequency = <100000>;
+
+		wm8903: wm8903@1a {
+			compatible = "wlf,wm8903";
+			reg = <0x1a>;
+			interrupt-parent = <&gpio>;
+			interrupts = <179 0x04>; /* gpio PW3 */
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			micdet-cfg = <0>;
+			micdet-delay = <100>;
+			gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
+		};
+
+		tps62361 {
+			compatible = "ti,tps62361";
+			reg = <0x60>;
+
+			regulator-name = "tps62361-vout";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-boot-on;
+			regulator-always-on;
+			ti,vsel0-state-high;
+			ti,vsel1-state-high;
+		};
+	};
+
+	ahub {
+		i2s@70080400 {
+			status = "okay";
+		};
 	};
 
 	sdhci@78000000 {
+		status = "okay";
 		cd-gpios = <&gpio 69 0>; /* gpio PI5 */
 		wp-gpios = <&gpio 155 0>; /* gpio PT3 */
 		power-gpios = <&gpio 31 0>; /* gpio PD7 */
+		bus-width = <4>;
 	};
 
-	sdhci@78000200 {
-		status = "disable";
-	};
-
-	sdhci@78000400 {
-		status = "disable";
+	sdhci@78000600 {
+		status = "okay";
+		support-8bit;
+		bus-width = <8>;
 	};
 
-	sdhci@78000400 {
-		support-8bit;
+	sound {
+		compatible = "nvidia,tegra-audio-wm8903-cardhu",
+			     "nvidia,tegra-audio-wm8903";
+		nvidia,model = "NVIDIA Tegra Cardhu";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"Int Spk", "ROP",
+			"Int Spk", "RON",
+			"Int Spk", "LOP",
+			"Int Spk", "LON",
+			"Mic Jack", "MICBIAS",
+			"IN1L", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&wm8903>;
+
+		nvidia,spkr-en-gpios = <&wm8903 2 0>;
+		nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
 	};
 };
diff --git a/arch/arm/boot/dts/tegra-harmony.dts b/arch/arm/boot/dts/tegra-harmony.dts
index 6e8447dc0202..7de701365fce 100644
--- a/arch/arm/boot/dts/tegra-harmony.dts
+++ b/arch/arm/boot/dts/tegra-harmony.dts
@@ -6,46 +6,309 @@
 	model = "NVIDIA Tegra2 Harmony evaluation board";
 	compatible = "nvidia,harmony", "nvidia,tegra20";
 
-	memory@0 {
-		reg = < 0x00000000 0x40000000 >;
+	memory {
+		reg = <0x00000000 0x40000000>;
 	};
 
-	pmc@7000f400 {
-		nvidia,invert-interrupt;
+	pinmux {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			ata {
+				nvidia,pins = "ata";
+				nvidia,function = "ide";
+			};
+			atb {
+				nvidia,pins = "atb", "gma", "gme";
+				nvidia,function = "sdio4";
+			};
+			atc {
+				nvidia,pins = "atc";
+				nvidia,function = "nand";
+			};
+			atd {
+				nvidia,pins = "atd", "ate", "gmb", "gmd", "gpu",
+					"spia", "spib", "spic";
+				nvidia,function = "gmi";
+			};
+			cdev1 {
+				nvidia,pins = "cdev1";
+				nvidia,function = "plla_out";
+			};
+			cdev2 {
+				nvidia,pins = "cdev2";
+				nvidia,function = "pllp_out4";
+			};
+			crtp {
+				nvidia,pins = "crtp";
+				nvidia,function = "crt";
+			};
+			csus {
+				nvidia,pins = "csus";
+				nvidia,function = "vi_sensor_clk";
+			};
+			dap1 {
+				nvidia,pins = "dap1";
+				nvidia,function = "dap1";
+			};
+			dap2 {
+				nvidia,pins = "dap2";
+				nvidia,function = "dap2";
+			};
+			dap3 {
+				nvidia,pins = "dap3";
+				nvidia,function = "dap3";
+			};
+			dap4 {
+				nvidia,pins = "dap4";
+				nvidia,function = "dap4";
+			};
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "i2c2";
+			};
+			dta {
+				nvidia,pins = "dta", "dtd";
+				nvidia,function = "sdio2";
+			};
+			dtb {
+				nvidia,pins = "dtb", "dtc", "dte";
+				nvidia,function = "rsvd1";
+			};
+			dtf {
+				nvidia,pins = "dtf";
+				nvidia,function = "i2c3";
+			};
+			gmc {
+				nvidia,pins = "gmc";
+				nvidia,function = "uartd";
+			};
+			gpu7 {
+				nvidia,pins = "gpu7";
+				nvidia,function = "rtck";
+			};
+			gpv {
+				nvidia,pins = "gpv", "slxa", "slxk";
+				nvidia,function = "pcie";
+			};
+			hdint {
+				nvidia,pins = "hdint", "pta";
+				nvidia,function = "hdmi";
+			};
+			i2cp {
+				nvidia,pins = "i2cp";
+				nvidia,function = "i2cp";
+			};
+			irrx {
+				nvidia,pins = "irrx", "irtx";
+				nvidia,function = "uarta";
+			};
+			kbca {
+				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+					"kbce", "kbcf";
+				nvidia,function = "kbc";
+			};
+			lcsn {
+				nvidia,pins = "lcsn", "ld0", "ld1", "ld2",
+					"ld3", "ld4", "ld5", "ld6", "ld7",
+					"ld8", "ld9", "ld10", "ld11", "ld12",
+					"ld13", "ld14", "ld15", "ld16", "ld17",
+					"ldc", "ldi", "lhp0", "lhp1", "lhp2",
+					"lhs", "lm0", "lm1", "lpp", "lpw0",
+					"lpw1", "lpw2", "lsc0", "lsc1", "lsck",
+					"lsda", "lsdi", "lspi", "lvp0", "lvp1",
+					"lvs";
+				nvidia,function = "displaya";
+			};
+			owc {
+				nvidia,pins = "owc", "spdi", "spdo", "uac";
+				nvidia,function = "rsvd2";
+			};
+			pmc {
+				nvidia,pins = "pmc";
+				nvidia,function = "pwr_on";
+			};
+			rm {
+				nvidia,pins = "rm";
+				nvidia,function = "i2c1";
+			};
+			sdb {
+				nvidia,pins = "sdb", "sdc", "sdd";
+				nvidia,function = "pwm";
+			};
+			sdio1 {
+				nvidia,pins = "sdio1";
+				nvidia,function = "sdio1";
+			};
+			slxc {
+				nvidia,pins = "slxc", "slxd";
+				nvidia,function = "spdif";
+			};
+			spid {
+				nvidia,pins = "spid", "spie", "spif";
+				nvidia,function = "spi1";
+			};
+			spig {
+				nvidia,pins = "spig", "spih";
+				nvidia,function = "spi2_alt";
+			};
+			uaa {
+				nvidia,pins = "uaa", "uab", "uda";
+				nvidia,function = "ulpi";
+			};
+			uad {
+				nvidia,pins = "uad";
+				nvidia,function = "irda";
+			};
+			uca {
+				nvidia,pins = "uca", "ucb";
+				nvidia,function = "uartc";
+			};
+			conf_ata {
+				nvidia,pins = "ata", "atb", "atc", "atd", "ate",
+					"cdev1", "cdev2", "dap1", "dtb", "gma",
+					"gmb", "gmc", "gmd", "gme", "gpu7",
+					"gpv", "i2cp", "pta", "rm", "slxa",
+					"slxk", "spia", "spib", "uac";
+				nvidia,pull = <0>;
+				nvidia,tristate = <0>;
+			};
+			conf_ck32 {
+				nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
+					"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
+				nvidia,pull = <0>;
+			};
+			conf_csus {
+				nvidia,pins = "csus", "spid", "spif";
+				nvidia,pull = <1>;
+				nvidia,tristate = <1>;
+			};
+			conf_crtp {
+				nvidia,pins = "crtp", "dap2", "dap3", "dap4",
+					"dtc", "dte", "dtf", "gpu", "sdio1",
+					"slxc", "slxd", "spdi", "spdo", "spig",
+					"uda";
+				nvidia,pull = <0>;
+				nvidia,tristate = <1>;
+			};
+			conf_ddc {
+				nvidia,pins = "ddc", "dta", "dtd", "kbca",
+					"kbcb", "kbcc", "kbcd", "kbce", "kbcf",
+					"sdc";
+				nvidia,pull = <2>;
+				nvidia,tristate = <0>;
+			};
+			conf_hdint {
+				nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
+					"lpw1", "lsc1", "lsck", "lsda", "lsdi",
+					"lvp0", "owc", "sdb";
+				nvidia,tristate = <1>;
+			};
+			conf_irrx {
+				nvidia,pins = "irrx", "irtx", "sdd", "spic",
+					"spie", "spih", "uaa", "uab", "uad",
+					"uca", "ucb";
+				nvidia,pull = <2>;
+				nvidia,tristate = <1>;
+			};
+			conf_lc {
+				nvidia,pins = "lc", "ls";
+				nvidia,pull = <2>;
+			};
+			conf_ld0 {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+					"ld5", "ld6", "ld7", "ld8", "ld9",
+					"ld10", "ld11", "ld12", "ld13", "ld14",
+					"ld15", "ld16", "ld17", "ldi", "lhp0",
+					"lhp1", "lhp2", "lhs", "lm0", "lpp",
+					"lpw0", "lpw2", "lsc0", "lspi", "lvp1",
+					"lvs", "pmc";
+				nvidia,tristate = <0>;
+			};
+			conf_ld17_0 {
+				nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
+					"ld23_22";
+				nvidia,pull = <1>;
+			};
+		};
+	};
+
+	i2s@70002800 {
+		status = "okay";
+	};
+
+	serial@70006300 {
+		status = "okay";
+		clock-frequency = <216000000>;
 	};
 
 	i2c@7000c000 {
+		status = "okay";
 		clock-frequency = <400000>;
 
 		wm8903: wm8903@1a {
 			compatible = "wlf,wm8903";
 			reg = <0x1a>;
 			interrupt-parent = <&gpio>;
-			interrupts = < 187 0x04 >;
+			interrupts = <187 0x04>;
 
 			gpio-controller;
 			#gpio-cells = <2>;
 
 			micdet-cfg = <0>;
 			micdet-delay = <100>;
-			gpio-cfg = < 0xffffffff 0xffffffff 0 0xffffffff 0xffffffff >;
+			gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
 		};
 	};
 
 	i2c@7000c400 {
+		status = "okay";
 		clock-frequency = <400000>;
 	};
 
 	i2c@7000c500 {
+		status = "okay";
 		clock-frequency = <400000>;
 	};
 
 	i2c@7000d000 {
+		status = "okay";
 		clock-frequency = <400000>;
 	};
 
-	i2s@70002a00 {
-		status = "disable";
+	pmc {
+		nvidia,invert-interrupt;
+	};
+
+	usb@c5000000 {
+		status = "okay";
+	};
+
+	usb@c5004000 {
+		status = "okay";
+		nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */
+	};
+
+	usb@c5008000 {
+		status = "okay";
+	};
+
+	sdhci@c8000200 {
+		status = "okay";
+		cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+		wp-gpios = <&gpio 57 0>; /* gpio PH1 */
+		power-gpios = <&gpio 155 0>; /* gpio PT3 */
+		bus-width = <4>;
+	};
+
+	sdhci@c8000600 {
+		status = "okay";
+		cd-gpios = <&gpio 58 0>; /* gpio PH2 */
+		wp-gpios = <&gpio 59 0>; /* gpio PH3 */
+		power-gpios = <&gpio 70 0>; /* gpio PI6 */
+		support-8bit;
+		bus-width = <8>;
 	};
 
 	sound {
@@ -71,45 +334,4 @@
 		nvidia,int-mic-en-gpios = <&gpio 184 0>; /*gpio PX0 */
 		nvidia,ext-mic-en-gpios = <&gpio 185 0>; /* gpio PX1 */
 	};
-
-	serial@70006000 {
-		status = "disable";
-	};
-
-	serial@70006040 {
-		status = "disable";
-	};
-
-	serial@70006200 {
-		status = "disable";
-	};
-
-	serial@70006300 {
-		clock-frequency = < 216000000 >;
-	};
-
-	serial@70006400 {
-		status = "disable";
-	};
-
-	sdhci@c8000000 {
-		status = "disable";
-	};
-
-	sdhci@c8000200 {
-		cd-gpios = <&gpio 69 0>; /* gpio PI5 */
-		wp-gpios = <&gpio 57 0>; /* gpio PH1 */
-		power-gpios = <&gpio 155 0>; /* gpio PT3 */
-	};
-
-	sdhci@c8000400 {
-		status = "disable";
-	};
-
-	sdhci@c8000600 {
-		cd-gpios = <&gpio 58 0>; /* gpio PH2 */
-		wp-gpios = <&gpio 59 0>; /* gpio PH3 */
-		power-gpios = <&gpio 70 0>; /* gpio PI6 */
-		support-8bit;
-	};
 };
diff --git a/arch/arm/boot/dts/tegra-paz00.dts b/arch/arm/boot/dts/tegra-paz00.dts
index 6c02abb469d4..bfeb117d5aea 100644
--- a/arch/arm/boot/dts/tegra-paz00.dts
+++ b/arch/arm/boot/dts/tegra-paz00.dts
@@ -6,11 +6,242 @@
 	model = "Toshiba AC100 / Dynabook AZ";
 	compatible = "compal,paz00", "nvidia,tegra20";
 
-	memory@0 {
+	memory {
 		reg = <0x00000000 0x20000000>;
 	};
 
+	pinmux {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			ata {
+				nvidia,pins = "ata", "atc", "atd", "ate",
+					"dap2", "gmb", "gmc", "gmd", "spia",
+					"spib", "spic", "spid", "spie";
+				nvidia,function = "gmi";
+			};
+			atb {
+				nvidia,pins = "atb", "gma", "gme";
+				nvidia,function = "sdio4";
+			};
+			cdev1 {
+				nvidia,pins = "cdev1";
+				nvidia,function = "plla_out";
+			};
+			cdev2 {
+				nvidia,pins = "cdev2";
+				nvidia,function = "pllp_out4";
+			};
+			crtp {
+				nvidia,pins = "crtp";
+				nvidia,function = "crt";
+			};
+			csus {
+				nvidia,pins = "csus";
+				nvidia,function = "pllc_out1";
+			};
+			dap1 {
+				nvidia,pins = "dap1";
+				nvidia,function = "dap1";
+			};
+			dap3 {
+				nvidia,pins = "dap3";
+				nvidia,function = "dap3";
+			};
+			dap4 {
+				nvidia,pins = "dap4";
+				nvidia,function = "dap4";
+			};
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "i2c2";
+			};
+			dta {
+				nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte";
+				nvidia,function = "rsvd1";
+			};
+			dtf {
+				nvidia,pins = "dtf";
+				nvidia,function = "i2c3";
+			};
+			gpu {
+				nvidia,pins = "gpu", "sdb", "sdd";
+				nvidia,function = "pwm";
+			};
+			gpu7 {
+				nvidia,pins = "gpu7";
+				nvidia,function = "rtck";
+			};
+			gpv {
+				nvidia,pins = "gpv", "slxa", "slxk";
+				nvidia,function = "pcie";
+			};
+			hdint {
+				nvidia,pins = "hdint", "pta";
+				nvidia,function = "hdmi";
+			};
+			i2cp {
+				nvidia,pins = "i2cp";
+				nvidia,function = "i2cp";
+			};
+			irrx {
+				nvidia,pins = "irrx", "irtx";
+				nvidia,function = "uarta";
+			};
+			kbca {
+				nvidia,pins = "kbca", "kbcc", "kbce", "kbcf";
+				nvidia,function = "kbc";
+			};
+			kbcb {
+				nvidia,pins = "kbcb", "kbcd";
+				nvidia,function = "sdio2";
+			};
+			lcsn {
+				nvidia,pins = "lcsn", "ld0", "ld1", "ld2",
+					"ld3", "ld4", "ld5", "ld6", "ld7",
+					"ld8", "ld9", "ld10", "ld11", "ld12",
+					"ld13", "ld14", "ld15", "ld16", "ld17",
+					"ldc", "ldi", "lhp0", "lhp1", "lhp2",
+					"lhs", "lm0", "lm1", "lpp", "lpw0",
+					"lpw1", "lpw2", "lsc0", "lsc1", "lsck",
+					"lsda", "lsdi", "lspi", "lvp0", "lvp1",
+					"lvs";
+				nvidia,function = "displaya";
+			};
+			owc {
+				nvidia,pins = "owc";
+				nvidia,function = "owr";
+			};
+			pmc {
+				nvidia,pins = "pmc";
+				nvidia,function = "pwr_on";
+			};
+			rm {
+				nvidia,pins = "rm";
+				nvidia,function = "i2c1";
+			};
+			sdc {
+				nvidia,pins = "sdc";
+				nvidia,function = "twc";
+			};
+			sdio1 {
+				nvidia,pins = "sdio1";
+				nvidia,function = "sdio1";
+			};
+			slxc {
+				nvidia,pins = "slxc", "slxd";
+				nvidia,function = "spi4";
+			};
+			spdi {
+				nvidia,pins = "spdi", "spdo";
+				nvidia,function = "rsvd2";
+			};
+			spif {
+				nvidia,pins = "spif", "uac";
+				nvidia,function = "rsvd4";
+			};
+			spig {
+				nvidia,pins = "spig", "spih";
+				nvidia,function = "spi2_alt";
+			};
+			uaa {
+				nvidia,pins = "uaa", "uab", "uda";
+				nvidia,function = "ulpi";
+			};
+			uad {
+				nvidia,pins = "uad";
+				nvidia,function = "spdif";
+			};
+			uca {
+				nvidia,pins = "uca", "ucb";
+				nvidia,function = "uartc";
+			};
+			conf_ata {
+				nvidia,pins = "ata", "atb", "atc", "atd", "ate",
+					"cdev1", "cdev2", "dap1", "dap2", "dtf",
+					"gma", "gmb", "gmc", "gmd", "gme",
+					"gpu", "gpu7", "gpv", "i2cp", "pta",
+					"rm", "sdio1", "slxk", "spdo", "uac",
+					"uda";
+				nvidia,pull = <0>;
+				nvidia,tristate = <0>;
+			};
+			conf_ck32 {
+				nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
+					"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
+				nvidia,pull = <0>;
+			};
+			conf_crtp {
+				nvidia,pins = "crtp", "dap3", "dap4", "dtb",
+					"dtc", "dte", "slxa", "slxc", "slxd",
+					"spdi";
+				nvidia,pull = <0>;
+				nvidia,tristate = <1>;
+			};
+			conf_csus {
+				nvidia,pins = "csus", "spia", "spib", "spid",
+					"spif";
+				nvidia,pull = <1>;
+				nvidia,tristate = <1>;
+			};
+			conf_ddc {
+				nvidia,pins = "ddc", "irrx", "irtx", "kbca",
+					"kbcb", "kbcc", "kbcd", "kbce", "kbcf",
+					"spic", "spig", "uaa", "uab";
+				nvidia,pull = <2>;
+				nvidia,tristate = <0>;
+			};
+			conf_dta {
+				nvidia,pins = "dta", "dtd", "owc", "sdc", "sdd",
+					"spie", "spih", "uad", "uca", "ucb";
+				nvidia,pull = <2>;
+				nvidia,tristate = <1>;
+			};
+			conf_hdint {
+				nvidia,pins = "hdint", "ld0", "ld1", "ld2",
+					"ld3", "ld4", "ld5", "ld6", "ld7",
+					"ld8", "ld9", "ld10", "ld11", "ld12",
+					"ld13", "ld14", "ld15", "ld16", "ld17",
+					"ldc", "ldi", "lhs", "lsc0", "lspi",
+					"lvs", "pmc";
+				nvidia,tristate = <0>;
+			};
+			conf_lc {
+				nvidia,pins = "lc", "ls";
+				nvidia,pull = <2>;
+			};
+			conf_lcsn {
+				nvidia,pins = "lcsn", "lhp0", "lhp1", "lhp2",
+					"lm0", "lm1", "lpp", "lpw0", "lpw1",
+					"lpw2", "lsc1", "lsck", "lsda", "lsdi",
+					"lvp0", "lvp1", "sdb";
+				nvidia,tristate = <1>;
+			};
+			conf_ld17_0 {
+				nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
+					"ld23_22";
+				nvidia,pull = <1>;
+			};
+		};
+	};
+
+	i2s@70002800 {
+		status = "okay";
+	};
+
+	serial@70006000 {
+		status = "okay";
+		clock-frequency = <216000000>;
+	};
+
+	serial@70006200 {
+		status = "okay";
+		clock-frequency = <216000000>;
+	};
+
 	i2c@7000c000 {
+		status = "okay";
 		clock-frequency = <400000>;
 
 		alc5632: alc5632@1e {
@@ -22,25 +253,23 @@
 	};
 
 	i2c@7000c400 {
+		status = "okay";
 		clock-frequency = <400000>;
 	};
 
-	i2c@7000c500 {
-		status = "disable";
-	};
-
-	nvec@7000c500 {
-		#address-cells = <1>;
-		#size-cells = <0>;
+	nvec {
 		compatible = "nvidia,nvec";
-		reg = <0x7000C500 0x100>;
+		reg = <0x7000c500 0x100>;
 		interrupts = <0 92 0x04>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 		clock-frequency = <80000>;
-		request-gpios = <&gpio 170 0>;
+		request-gpios = <&gpio 170 0>; /* gpio PV2 */
 		slave-addr = <138>;
 	};
 
 	i2c@7000d000 {
+		status = "okay";
 		clock-frequency = <400000>;
 
 		adt7461@4c {
@@ -49,66 +278,31 @@
 		};
 	};
 
-	i2s@70002a00 {
-		status = "disable";
-	};
-
-	sound {
-		compatible = "nvidia,tegra-audio-alc5632-paz00",
-			"nvidia,tegra-audio-alc5632";
-
-		nvidia,model = "Compal PAZ00";
-
-		nvidia,audio-routing =
-			"Int Spk", "SPKOUT",
-			"Int Spk", "SPKOUTN",
-			"Headset Mic", "MICBIAS1",
-			"MIC1", "Headset Mic",
-			"Headset Stereophone", "HPR",
-			"Headset Stereophone", "HPL",
-			"DMICDAT", "Digital Mic";
-
-		nvidia,audio-codec = <&alc5632>;
-		nvidia,i2s-controller = <&tegra_i2s1>;
-		nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
-	};
-
-	serial@70006000 {
-		clock-frequency = <216000000>;
+	usb@c5000000 {
+		status = "okay";
 	};
 
-	serial@70006040 {
-		status = "disable";
+	usb@c5004000 {
+		status = "okay";
+		nvidia,phy-reset-gpio = <&gpio 168 0>; /* gpio PV0 */
 	};
 
-	serial@70006200 {
-		clock-frequency = <216000000>;
-	};
-
-	serial@70006300 {
-		status = "disable";
-	};
-
-	serial@70006400 {
-		status = "disable";
+	usb@c5008000 {
+		status = "okay";
 	};
 
 	sdhci@c8000000 {
+		status = "okay";
 		cd-gpios = <&gpio 173 0>; /* gpio PV5 */
 		wp-gpios = <&gpio 57 0>;  /* gpio PH1 */
 		power-gpios = <&gpio 169 0>; /* gpio PV1 */
-	};
-
-	sdhci@c8000200 {
-		status = "disable";
-	};
-
-	sdhci@c8000400 {
-		status = "disable";
+		bus-width = <4>;
 	};
 
 	sdhci@c8000600 {
+		status = "okay";
 		support-8bit;
+		bus-width = <8>;
 	};
 
 	gpio-keys {
@@ -127,8 +321,28 @@
 
 		wifi {
 			label = "wifi-led";
-			gpios = <&gpio 24 0>;
+			gpios = <&gpio 24 0>; /* gpio PD0 */
 			linux,default-trigger = "rfkill0";
 		};
 	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-alc5632-paz00",
+			"nvidia,tegra-audio-alc5632";
+
+		nvidia,model = "Compal PAZ00";
+
+		nvidia,audio-routing =
+			"Int Spk", "SPKOUT",
+			"Int Spk", "SPKOUTN",
+			"Headset Mic", "MICBIAS1",
+			"MIC1", "Headset Mic",
+			"Headset Stereophone", "HPR",
+			"Headset Stereophone", "HPL",
+			"DMICDAT", "Digital Mic";
+
+		nvidia,audio-codec = <&alc5632>;
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
+	};
 };
diff --git a/arch/arm/boot/dts/tegra-seaboard.dts b/arch/arm/boot/dts/tegra-seaboard.dts
index dbf1c5a171c2..89cb7f2acd92 100644
--- a/arch/arm/boot/dts/tegra-seaboard.dts
+++ b/arch/arm/boot/dts/tegra-seaboard.dts
@@ -7,112 +7,398 @@
 	compatible = "nvidia,seaboard", "nvidia,tegra20";
 
 	memory {
-		device_type = "memory";
-		reg = < 0x00000000 0x40000000 >;
+		reg = <0x00000000 0x40000000>;
+	};
+
+	pinmux {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			ata {
+				nvidia,pins = "ata";
+				nvidia,function = "ide";
+			};
+			atb {
+				nvidia,pins = "atb", "gma", "gme";
+				nvidia,function = "sdio4";
+			};
+			atc {
+				nvidia,pins = "atc";
+				nvidia,function = "nand";
+			};
+			atd {
+				nvidia,pins = "atd", "ate", "gmb", "spia",
+					"spib", "spic";
+				nvidia,function = "gmi";
+			};
+			cdev1 {
+				nvidia,pins = "cdev1";
+				nvidia,function = "plla_out";
+			};
+			cdev2 {
+				nvidia,pins = "cdev2";
+				nvidia,function = "pllp_out4";
+			};
+			crtp {
+				nvidia,pins = "crtp", "lm1";
+				nvidia,function = "crt";
+			};
+			csus {
+				nvidia,pins = "csus";
+				nvidia,function = "vi_sensor_clk";
+			};
+			dap1 {
+				nvidia,pins = "dap1";
+				nvidia,function = "dap1";
+			};
+			dap2 {
+				nvidia,pins = "dap2";
+				nvidia,function = "dap2";
+			};
+			dap3 {
+				nvidia,pins = "dap3";
+				nvidia,function = "dap3";
+			};
+			dap4 {
+				nvidia,pins = "dap4";
+				nvidia,function = "dap4";
+			};
+			ddc {
+				nvidia,pins = "ddc", "owc", "spdi", "spdo",
+					"uac";
+				nvidia,function = "rsvd2";
+			};
+			dta {
+				nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte";
+				nvidia,function = "vi";
+			};
+			dtf {
+				nvidia,pins = "dtf";
+				nvidia,function = "i2c3";
+			};
+			gmc {
+				nvidia,pins = "gmc";
+				nvidia,function = "uartd";
+			};
+			gmd {
+				nvidia,pins = "gmd";
+				nvidia,function = "sflash";
+			};
+			gpu {
+				nvidia,pins = "gpu";
+				nvidia,function = "pwm";
+			};
+			gpu7 {
+				nvidia,pins = "gpu7";
+				nvidia,function = "rtck";
+			};
+			gpv {
+				nvidia,pins = "gpv", "slxa", "slxk";
+				nvidia,function = "pcie";
+			};
+			hdint {
+				nvidia,pins = "hdint", "lpw0", "lpw2", "lsc1",
+					"lsck", "lsda";
+				nvidia,function = "hdmi";
+			};
+			i2cp {
+				nvidia,pins = "i2cp";
+				nvidia,function = "i2cp";
+			};
+			irrx {
+				nvidia,pins = "irrx", "irtx";
+				nvidia,function = "uartb";
+			};
+			kbca {
+				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+					"kbce", "kbcf";
+				nvidia,function = "kbc";
+			};
+			lcsn {
+				nvidia,pins = "lcsn", "ldc", "lm0", "lpw1",
+					"lsdi", "lvp0";
+				nvidia,function = "rsvd4";
+			};
+			ld0 {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+					"ld5", "ld6", "ld7", "ld8", "ld9",
+					"ld10", "ld11", "ld12", "ld13", "ld14",
+					"ld15", "ld16", "ld17", "ldi", "lhp0",
+					"lhp1", "lhp2", "lhs", "lpp", "lsc0",
+					"lspi", "lvp1", "lvs";
+				nvidia,function = "displaya";
+			};
+			pmc {
+				nvidia,pins = "pmc";
+				nvidia,function = "pwr_on";
+			};
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "i2c2";
+			};
+			rm {
+				nvidia,pins = "rm";
+				nvidia,function = "i2c1";
+			};
+			sdb {
+				nvidia,pins = "sdb", "sdc", "sdd";
+				nvidia,function = "sdio3";
+			};
+			sdio1 {
+				nvidia,pins = "sdio1";
+				nvidia,function = "sdio1";
+			};
+			slxc {
+				nvidia,pins = "slxc", "slxd";
+				nvidia,function = "spdif";
+			};
+			spid {
+				nvidia,pins = "spid", "spie", "spif";
+				nvidia,function = "spi1";
+			};
+			spig {
+				nvidia,pins = "spig", "spih";
+				nvidia,function = "spi2_alt";
+			};
+			uaa {
+				nvidia,pins = "uaa", "uab", "uda";
+				nvidia,function = "ulpi";
+			};
+			uad {
+				nvidia,pins = "uad";
+				nvidia,function = "irda";
+			};
+			uca {
+				nvidia,pins = "uca", "ucb";
+				nvidia,function = "uartc";
+			};
+			conf_ata {
+				nvidia,pins = "ata", "atb", "atc", "atd",
+					"cdev1", "cdev2", "dap1", "dap2",
+					"dap4", "dtf", "gma", "gmc", "gmd",
+					"gme", "gpu", "gpu7", "i2cp", "irrx",
+					"irtx", "pta", "rm", "sdc", "sdd",
+					"slxd", "slxk", "spdi", "spdo", "uac",
+					"uad", "uca", "ucb", "uda";
+				nvidia,pull = <0>;
+				nvidia,tristate = <0>;
+			};
+			conf_ate {
+				nvidia,pins = "ate", "csus", "dap3", "ddc",
+					"gpv", "owc", "slxc", "spib", "spid",
+					"spie";
+				nvidia,pull = <0>;
+				nvidia,tristate = <1>;
+			};
+			conf_ck32 {
+				nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
+					"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
+				nvidia,pull = <0>;
+			};
+			conf_crtp {
+				nvidia,pins = "crtp", "gmb", "slxa", "spia",
+					"spig", "spih";
+				nvidia,pull = <2>;
+				nvidia,tristate = <1>;
+			};
+			conf_dta {
+				nvidia,pins = "dta", "dtb", "dtc", "dtd";
+				nvidia,pull = <1>;
+				nvidia,tristate = <0>;
+			};
+			conf_dte {
+				nvidia,pins = "dte", "spif";
+				nvidia,pull = <1>;
+				nvidia,tristate = <1>;
+			};
+			conf_hdint {
+				nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
+					"lpw1", "lsc1", "lsck", "lsda", "lsdi",
+					"lvp0";
+				nvidia,tristate = <1>;
+			};
+			conf_kbca {
+				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+					"kbce", "kbcf", "sdio1", "spic", "uaa",
+					"uab";
+				nvidia,pull = <2>;
+				nvidia,tristate = <0>;
+			};
+			conf_lc {
+				nvidia,pins = "lc", "ls";
+				nvidia,pull = <2>;
+			};
+			conf_ld0 {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+					"ld5", "ld6", "ld7", "ld8", "ld9",
+					"ld10", "ld11", "ld12", "ld13", "ld14",
+					"ld15", "ld16", "ld17", "ldi", "lhp0",
+					"lhp1", "lhp2", "lhs", "lm0", "lpp",
+					"lpw0", "lpw2", "lsc0", "lspi", "lvp1",
+					"lvs", "pmc", "sdb";
+				nvidia,tristate = <0>;
+			};
+			conf_ld17_0 {
+				nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
+					"ld23_22";
+				nvidia,pull = <1>;
+			};
+			drive_sdio1 {
+				nvidia,pins = "drive_sdio1";
+				nvidia,high-speed-mode = <0>;
+				nvidia,schmitt = <0>;
+				nvidia,low-power-mode = <3>;
+				nvidia,pull-down-strength = <31>;
+				nvidia,pull-up-strength = <31>;
+				nvidia,slew-rate-rising = <3>;
+				nvidia,slew-rate-falling = <3>;
+			};
+		};
+	};
+
+	i2s@70002800 {
+		status = "okay";
+	};
+
+	serial@70006300 {
+		status = "okay";
+		clock-frequency = <216000000>;
 	};
 
 	i2c@7000c000 {
+		status = "okay";
 		clock-frequency = <400000>;
 
 		wm8903: wm8903@1a {
 			compatible = "wlf,wm8903";
 			reg = <0x1a>;
 			interrupt-parent = <&gpio>;
-			interrupts = < 187 0x04 >;
+			interrupts = <187 0x04>;
 
 			gpio-controller;
 			#gpio-cells = <2>;
 
 			micdet-cfg = <0>;
 			micdet-delay = <100>;
-			gpio-cfg = < 0xffffffff 0xffffffff 0 0xffffffff 0xffffffff >;
+			gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
+		};
+
+		/* ALS and proximity sensor */
+		isl29018@44 {
+			compatible = "isil,isl29018";
+			reg = <0x44>;
+			interrupt-parent = <&gpio>;
+			interrupts = <202 0x04>; /* GPIO PZ2 */
+		};
+
+		gyrometer@68 {
+			compatible = "invn,mpu3050";
+			reg = <0x68>;
+			interrupt-parent = <&gpio>;
+			interrupts = <204 0x04>; /* gpio PZ4 */
 		};
 	};
 
 	i2c@7000c400 {
-		clock-frequency = <400000>;
+		status = "okay";
+		clock-frequency = <100000>;
+
+		smart-battery@b {
+			compatible = "ti,bq20z75", "smart-battery-1.1";
+			reg = <0xb>;
+			ti,i2c-retry-count = <2>;
+			ti,poll-retry-count = <10>;
+		};
 	};
 
 	i2c@7000c500 {
+		status = "okay";
 		clock-frequency = <400000>;
 	};
 
 	i2c@7000d000 {
+		status = "okay";
 		clock-frequency = <400000>;
 
-		adt7461@4c {
-			compatible = "adt7461";
+		temperature-sensor@4c {
+			compatible = "nct1008";
 			reg = <0x4c>;
 		};
-	};
-
-	i2s@70002a00 {
-		status = "disable";
-	};
-
-	sound {
-		compatible = "nvidia,tegra-audio-wm8903-seaboard",
-			     "nvidia,tegra-audio-wm8903";
-		nvidia,model = "NVIDIA Tegra Seaboard";
-
-		nvidia,audio-routing =
-			"Headphone Jack", "HPOUTR",
-			"Headphone Jack", "HPOUTL",
-			"Int Spk", "ROP",
-			"Int Spk", "RON",
-			"Int Spk", "LOP",
-			"Int Spk", "LON",
-			"Mic Jack", "MICBIAS",
-			"IN1R", "Mic Jack";
-
-		nvidia,i2s-controller = <&tegra_i2s1>;
-		nvidia,audio-codec = <&wm8903>;
-
-		nvidia,spkr-en-gpios = <&wm8903 2 0>;
-		nvidia,hp-det-gpios = <&gpio 185 0>; /* gpio PX1 */
-	};
-
-	serial@70006000 {
-		status = "disable";
-	};
 
-	serial@70006040 {
-		status = "disable";
+		magnetometer@c {
+			compatible = "ak8975";
+			reg = <0xc>;
+			interrupt-parent = <&gpio>;
+			interrupts = <109 0x04>; /* gpio PN5 */
+		};
 	};
 
-	serial@70006200 {
-		status = "disable";
-	};
+	emc {
+		emc-table@190000 {
+			reg = <190000>;
+			compatible = "nvidia,tegra20-emc-table";
+			clock-frequency = <190000>;
+			nvidia,emc-registers = <0x0000000c 0x00000026
+				0x00000009 0x00000003 0x00000004 0x00000004
+				0x00000002 0x0000000c 0x00000003 0x00000003
+				0x00000002 0x00000001 0x00000004 0x00000005
+				0x00000004 0x00000009 0x0000000d 0x0000059f
+				0x00000000 0x00000003 0x00000003 0x00000003
+				0x00000003 0x00000001 0x0000000b 0x000000c8
+				0x00000003 0x00000007 0x00000004 0x0000000f
+				0x00000002 0x00000000 0x00000000 0x00000002
+				0x00000000 0x00000000 0x00000083 0xa06204ae
+				0x007dc010 0x00000000 0x00000000 0x00000000
+				0x00000000 0x00000000 0x00000000 0x00000000>;
+		};
 
-	serial@70006300 {
-		clock-frequency = < 216000000 >;
+		emc-table@380000 {
+			reg = <380000>;
+			compatible = "nvidia,tegra20-emc-table";
+			clock-frequency = <380000>;
+			nvidia,emc-registers = <0x00000017 0x0000004b
+				0x00000012 0x00000006 0x00000004 0x00000005
+				0x00000003 0x0000000c 0x00000006 0x00000006
+				0x00000003 0x00000001 0x00000004 0x00000005
+				0x00000004 0x00000009 0x0000000d 0x00000b5f
+				0x00000000 0x00000003 0x00000003 0x00000006
+				0x00000006 0x00000001 0x00000011 0x000000c8
+				0x00000003 0x0000000e 0x00000007 0x0000000f
+				0x00000002 0x00000000 0x00000000 0x00000002
+				0x00000000 0x00000000 0x00000083 0xe044048b
+				0x007d8010 0x00000000 0x00000000 0x00000000
+				0x00000000 0x00000000 0x00000000 0x00000000>;
+		};
 	};
 
-	serial@70006400 {
-		status = "disable";
+	usb@c5000000 {
+		status = "okay";
+		nvidia,vbus-gpio = <&gpio 24 0>; /* PD0 */
+		dr_mode = "otg";
 	};
 
-	sdhci@c8000000 {
-		status = "disable";
+	usb@c5004000 {
+		status = "okay";
+		nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */
 	};
 
-	sdhci@c8000200 {
-		status = "disable";
+	usb@c5008000 {
+		status = "okay";
 	};
 
 	sdhci@c8000400 {
+		status = "okay";
 		cd-gpios = <&gpio 69 0>; /* gpio PI5 */
 		wp-gpios = <&gpio 57 0>; /* gpio PH1 */
 		power-gpios = <&gpio 70 0>; /* gpio PI6 */
+		bus-width = <4>;
 	};
 
 	sdhci@c8000600 {
+		status = "okay";
 		support-8bit;
-	};
-
-	usb@c5000000 {
-		nvidia,vbus-gpio = <&gpio 24 0>; /* PD0 */
-		dr_mode = "otg";
+		bus-width = <8>;
 	};
 
 	gpio-keys {
@@ -135,41 +421,25 @@
 		};
 	};
 
-	emc@7000f400 {
-		emc-table@190000 {
-			reg = < 190000 >;
-			compatible = "nvidia,tegra20-emc-table";
-			clock-frequency = < 190000 >;
-			nvidia,emc-registers = < 0x0000000c 0x00000026
-				0x00000009 0x00000003 0x00000004 0x00000004
-				0x00000002 0x0000000c 0x00000003 0x00000003
-				0x00000002 0x00000001 0x00000004 0x00000005
-				0x00000004 0x00000009 0x0000000d 0x0000059f
-				0x00000000 0x00000003 0x00000003 0x00000003
-				0x00000003 0x00000001 0x0000000b 0x000000c8
-				0x00000003 0x00000007 0x00000004 0x0000000f
-				0x00000002 0x00000000 0x00000000 0x00000002
-				0x00000000 0x00000000 0x00000083 0xa06204ae
-				0x007dc010 0x00000000 0x00000000 0x00000000
-				0x00000000 0x00000000 0x00000000 0x00000000 >;
-		};
+	sound {
+		compatible = "nvidia,tegra-audio-wm8903-seaboard",
+			     "nvidia,tegra-audio-wm8903";
+		nvidia,model = "NVIDIA Tegra Seaboard";
 
-		emc-table@380000 {
-			reg = < 380000 >;
-			compatible = "nvidia,tegra20-emc-table";
-			clock-frequency = < 380000 >;
-			nvidia,emc-registers = < 0x00000017 0x0000004b
-				0x00000012 0x00000006 0x00000004 0x00000005
-				0x00000003 0x0000000c 0x00000006 0x00000006
-				0x00000003 0x00000001 0x00000004 0x00000005
-				0x00000004 0x00000009 0x0000000d 0x00000b5f
-				0x00000000 0x00000003 0x00000003 0x00000006
-				0x00000006 0x00000001 0x00000011 0x000000c8
-				0x00000003 0x0000000e 0x00000007 0x0000000f
-				0x00000002 0x00000000 0x00000000 0x00000002
-				0x00000000 0x00000000 0x00000083 0xe044048b
-				0x007d8010 0x00000000 0x00000000 0x00000000
-				0x00000000 0x00000000 0x00000000 0x00000000 >;
-		};
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"Int Spk", "ROP",
+			"Int Spk", "RON",
+			"Int Spk", "LOP",
+			"Int Spk", "LON",
+			"Mic Jack", "MICBIAS",
+			"IN1R", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&wm8903>;
+
+		nvidia,spkr-en-gpios = <&wm8903 2 0>;
+		nvidia,hp-det-gpios = <&gpio 185 0>; /* gpio PX1 */
 	};
 };
diff --git a/arch/arm/boot/dts/tegra-trimslice.dts b/arch/arm/boot/dts/tegra-trimslice.dts
index 252476867b54..9de5636023f6 100644
--- a/arch/arm/boot/dts/tegra-trimslice.dts
+++ b/arch/arm/boot/dts/tegra-trimslice.dts
@@ -6,72 +6,301 @@
 	model = "Compulab TrimSlice board";
 	compatible = "compulab,trimslice", "nvidia,tegra20";
 
-	memory@0 {
-		reg = < 0x00000000 0x40000000 >;
+	memory {
+		reg = <0x00000000 0x40000000>;
 	};
 
-	i2c@7000c000 {
-		clock-frequency = <400000>;
-	};
+	pinmux {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
 
-	i2c@7000c400 {
-		clock-frequency = <400000>;
+		state_default: pinmux {
+			ata {
+				nvidia,pins = "ata";
+				nvidia,function = "ide";
+			};
+			atb {
+				nvidia,pins = "atb", "gma";
+				nvidia,function = "sdio4";
+			};
+			atc {
+				nvidia,pins = "atc", "gmb";
+				nvidia,function = "nand";
+			};
+			atd {
+				nvidia,pins = "atd", "ate", "gme", "pta";
+				nvidia,function = "gmi";
+			};
+			cdev1 {
+				nvidia,pins = "cdev1";
+				nvidia,function = "plla_out";
+			};
+			cdev2 {
+				nvidia,pins = "cdev2";
+				nvidia,function = "pllp_out4";
+			};
+			crtp {
+				nvidia,pins = "crtp";
+				nvidia,function = "crt";
+			};
+			csus {
+				nvidia,pins = "csus";
+				nvidia,function = "vi_sensor_clk";
+			};
+			dap1 {
+				nvidia,pins = "dap1";
+				nvidia,function = "dap1";
+			};
+			dap2 {
+				nvidia,pins = "dap2";
+				nvidia,function = "dap2";
+			};
+			dap3 {
+				nvidia,pins = "dap3";
+				nvidia,function = "dap3";
+			};
+			dap4 {
+				nvidia,pins = "dap4";
+				nvidia,function = "dap4";
+			};
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "i2c2";
+			};
+			dta {
+				nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte";
+				nvidia,function = "vi";
+			};
+			dtf {
+				nvidia,pins = "dtf";
+				nvidia,function = "i2c3";
+			};
+			gmc {
+				nvidia,pins = "gmc", "gmd";
+				nvidia,function = "sflash";
+			};
+			gpu {
+				nvidia,pins = "gpu";
+				nvidia,function = "uarta";
+			};
+			gpu7 {
+				nvidia,pins = "gpu7";
+				nvidia,function = "rtck";
+			};
+			gpv {
+				nvidia,pins = "gpv", "slxa", "slxk";
+				nvidia,function = "pcie";
+			};
+			hdint {
+				nvidia,pins = "hdint";
+				nvidia,function = "hdmi";
+			};
+			i2cp {
+				nvidia,pins = "i2cp";
+				nvidia,function = "i2cp";
+			};
+			irrx {
+				nvidia,pins = "irrx", "irtx";
+				nvidia,function = "uartb";
+			};
+			kbca {
+				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+					"kbce", "kbcf";
+				nvidia,function = "kbc";
+			};
+			lcsn {
+				nvidia,pins = "lcsn", "ld0", "ld1", "ld2",
+					"ld3", "ld4", "ld5", "ld6", "ld7",
+					"ld8", "ld9", "ld10", "ld11", "ld12",
+					"ld13", "ld14", "ld15", "ld16", "ld17",
+					"ldc", "ldi", "lhp0", "lhp1", "lhp2",
+					"lhs", "lm0", "lm1", "lpp", "lpw0",
+					"lpw1", "lpw2", "lsc0", "lsc1", "lsck",
+					"lsda", "lsdi", "lspi", "lvp0", "lvp1",
+					"lvs";
+				nvidia,function = "displaya";
+			};
+			owc {
+				nvidia,pins = "owc", "uac";
+				nvidia,function = "rsvd2";
+			};
+			pmc {
+				nvidia,pins = "pmc";
+				nvidia,function = "pwr_on";
+			};
+			rm {
+				nvidia,pins = "rm";
+				nvidia,function = "i2c1";
+			};
+			sdb {
+				nvidia,pins = "sdb", "sdc", "sdd";
+				nvidia,function = "pwm";
+			};
+			sdio1 {
+				nvidia,pins = "sdio1";
+				nvidia,function = "sdio1";
+			};
+			slxc {
+				nvidia,pins = "slxc", "slxd";
+				nvidia,function = "sdio3";
+			};
+			spdi {
+				nvidia,pins = "spdi", "spdo";
+				nvidia,function = "spdif";
+			};
+			spia {
+				nvidia,pins = "spia", "spib", "spic";
+				nvidia,function = "spi2";
+			};
+			spid {
+				nvidia,pins = "spid", "spie", "spif";
+				nvidia,function = "spi1";
+			};
+			spig {
+				nvidia,pins = "spig", "spih";
+				nvidia,function = "spi2_alt";
+			};
+			uaa {
+				nvidia,pins = "uaa", "uab", "uda";
+				nvidia,function = "ulpi";
+			};
+			uad {
+				nvidia,pins = "uad";
+				nvidia,function = "irda";
+			};
+			uca {
+				nvidia,pins = "uca", "ucb";
+				nvidia,function = "uartc";
+			};
+			conf_ata {
+				nvidia,pins = "ata", "atc", "atd", "ate",
+					"crtp", "dap2", "dap3", "dap4", "dta",
+					"dtb", "dtc", "dtd", "dte", "gmb",
+					"gme", "i2cp", "pta", "slxc", "slxd",
+					"spdi", "spdo", "uda";
+				nvidia,pull = <0>;
+				nvidia,tristate = <1>;
+			};
+			conf_atb {
+				nvidia,pins = "atb", "cdev1", "cdev2", "dap1",
+					"gma", "gmc", "gmd", "gpu", "gpu7",
+					"gpv", "sdio1", "slxa", "slxk", "uac";
+				nvidia,pull = <0>;
+				nvidia,tristate = <0>;
+			};
+			conf_ck32 {
+				nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
+					"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
+				nvidia,pull = <0>;
+			};
+			conf_csus {
+				nvidia,pins = "csus", "spia", "spib",
+					"spid", "spif";
+				nvidia,pull = <1>;
+				nvidia,tristate = <1>;
+			};
+			conf_ddc {
+				nvidia,pins = "ddc", "dtf", "rm", "sdc", "sdd";
+				nvidia,pull = <2>;
+				nvidia,tristate = <0>;
+			};
+			conf_hdint {
+				nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
+					"lpw1", "lsc1", "lsck", "lsda", "lsdi",
+					"lvp0", "pmc";
+				nvidia,tristate = <1>;
+			};
+			conf_irrx {
+				nvidia,pins = "irrx", "irtx", "kbca", "kbcb",
+					"kbcc", "kbcd", "kbce", "kbcf", "owc",
+					"spic", "spie", "spig", "spih", "uaa",
+					"uab", "uad", "uca", "ucb";
+				nvidia,pull = <2>;
+				nvidia,tristate = <1>;
+			};
+			conf_lc {
+				nvidia,pins = "lc", "ls";
+				nvidia,pull = <2>;
+			};
+			conf_ld0 {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+					"ld5", "ld6", "ld7", "ld8", "ld9",
+					"ld10", "ld11", "ld12", "ld13", "ld14",
+					"ld15", "ld16", "ld17", "ldi", "lhp0",
+					"lhp1", "lhp2", "lhs", "lm0", "lpp",
+					"lpw0", "lpw2", "lsc0", "lspi", "lvp1",
+					"lvs", "sdb";
+				nvidia,tristate = <0>;
+			};
+			conf_ld17_0 {
+				nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
+					"ld23_22";
+				nvidia,pull = <1>;
+			};
+		};
 	};
 
-	i2c@7000c500 {
-		clock-frequency = <400000>;
+	i2s@70002800 {
+		status = "okay";
 	};
 
-	i2c@7000d000 {
-		status = "disable";
+	serial@70006000 {
+		status = "okay";
+		clock-frequency = <216000000>;
 	};
 
-	i2s@70002800 {
-		status = "disable";
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <400000>;
 	};
 
-	i2s@70002a00 {
-		status = "disable";
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <400000>;
 	};
 
-	das@70000c00 {
-		status = "disable";
-	};
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <400000>;
 
-	serial@70006000 {
-		clock-frequency = < 216000000 >;
-	};
+		codec: codec@1a {
+			compatible = "ti,tlv320aic23";
+			reg = <0x1a>;
+		};
 
-	serial@70006040 {
-		status = "disable";
+		rtc@56 {
+			compatible = "emmicro,em3027";
+			reg = <0x56>;
+		};
 	};
 
-	serial@70006200 {
-		status = "disable";
+	usb@c5000000 {
+		status = "okay";
 	};
 
-	serial@70006300 {
-		status = "disable";
+	usb@c5004000 {
+		nvidia,phy-reset-gpio = <&gpio 168 0>; /* gpio PV0 */
 	};
 
-	serial@70006400 {
-		status = "disable";
+	usb@c5008000 {
+		status = "okay";
 	};
 
 	sdhci@c8000000 {
-		status = "disable";
-	};
-
-	sdhci@c8000200 {
-		status = "disable";
+		status = "okay";
+		bus-width = <4>;
 	};
 
-	sdhci@c8000400 {
-		status = "disable";
+	sdhci@c8000600 {
+		status = "okay";
+		cd-gpios = <&gpio 121 0>; /* gpio PP1 */
+		wp-gpios = <&gpio 122 0>; /* gpio PP2 */
+		bus-width = <4>;
 	};
 
-	sdhci@c8000600 {
-		cd-gpios = <&gpio 121 0>;
-		wp-gpios = <&gpio 122 0>;
+	sound {
+		compatible = "nvidia,tegra-audio-trimslice";
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&codec>;
 	};
 };
diff --git a/arch/arm/boot/dts/tegra-ventana.dts b/arch/arm/boot/dts/tegra-ventana.dts
index 2dcff8728e90..445343b0fbdd 100644
--- a/arch/arm/boot/dts/tegra-ventana.dts
+++ b/arch/arm/boot/dts/tegra-ventana.dts
@@ -7,41 +7,315 @@
 	compatible = "nvidia,ventana", "nvidia,tegra20";
 
 	memory {
-		reg = < 0x00000000 0x40000000 >;
+		reg = <0x00000000 0x40000000>;
+	};
+
+	pinmux {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			ata {
+				nvidia,pins = "ata";
+				nvidia,function = "ide";
+			};
+			atb {
+				nvidia,pins = "atb", "gma", "gme";
+				nvidia,function = "sdio4";
+			};
+			atc {
+				nvidia,pins = "atc";
+				nvidia,function = "nand";
+			};
+			atd {
+				nvidia,pins = "atd", "ate", "gmb", "spia",
+					"spib", "spic";
+				nvidia,function = "gmi";
+			};
+			cdev1 {
+				nvidia,pins = "cdev1";
+				nvidia,function = "plla_out";
+			};
+			cdev2 {
+				nvidia,pins = "cdev2";
+				nvidia,function = "pllp_out4";
+			};
+			crtp {
+				nvidia,pins = "crtp", "lm1";
+				nvidia,function = "crt";
+			};
+			csus {
+				nvidia,pins = "csus";
+				nvidia,function = "vi_sensor_clk";
+			};
+			dap1 {
+				nvidia,pins = "dap1";
+				nvidia,function = "dap1";
+			};
+			dap2 {
+				nvidia,pins = "dap2";
+				nvidia,function = "dap2";
+			};
+			dap3 {
+				nvidia,pins = "dap3";
+				nvidia,function = "dap3";
+			};
+			dap4 {
+				nvidia,pins = "dap4";
+				nvidia,function = "dap4";
+			};
+			ddc {
+				nvidia,pins = "ddc", "owc", "spdi", "spdo",
+					"uac";
+				nvidia,function = "rsvd2";
+			};
+			dta {
+				nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte";
+				nvidia,function = "vi";
+			};
+			dtf {
+				nvidia,pins = "dtf";
+				nvidia,function = "i2c3";
+			};
+			gmc {
+				nvidia,pins = "gmc";
+				nvidia,function = "uartd";
+			};
+			gmd {
+				nvidia,pins = "gmd";
+				nvidia,function = "sflash";
+			};
+			gpu {
+				nvidia,pins = "gpu";
+				nvidia,function = "pwm";
+			};
+			gpu7 {
+				nvidia,pins = "gpu7";
+				nvidia,function = "rtck";
+			};
+			gpv {
+				nvidia,pins = "gpv", "slxa", "slxk";
+				nvidia,function = "pcie";
+			};
+			hdint {
+				nvidia,pins = "hdint", "pta";
+				nvidia,function = "hdmi";
+			};
+			i2cp {
+				nvidia,pins = "i2cp";
+				nvidia,function = "i2cp";
+			};
+			irrx {
+				nvidia,pins = "irrx", "irtx";
+				nvidia,function = "uartb";
+			};
+			kbca {
+				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+					"kbce", "kbcf";
+				nvidia,function = "kbc";
+			};
+			lcsn {
+				nvidia,pins = "lcsn", "ldc", "lm0", "lpw1",
+					"lsdi", "lvp0";
+				nvidia,function = "rsvd4";
+			};
+			ld0 {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+					"ld5", "ld6", "ld7", "ld8", "ld9",
+					"ld10", "ld11", "ld12", "ld13", "ld14",
+					"ld15", "ld16", "ld17", "ldi", "lhp0",
+					"lhp1", "lhp2", "lhs", "lpp", "lpw0",
+					"lpw2", "lsc0", "lsc1", "lsck", "lsda",
+					"lspi", "lvp1", "lvs";
+				nvidia,function = "displaya";
+			};
+			pmc {
+				nvidia,pins = "pmc";
+				nvidia,function = "pwr_on";
+			};
+			rm {
+				nvidia,pins = "rm";
+				nvidia,function = "i2c1";
+			};
+			sdb {
+				nvidia,pins = "sdb", "sdc", "sdd", "slxc";
+				nvidia,function = "sdio3";
+			};
+			sdio1 {
+				nvidia,pins = "sdio1";
+				nvidia,function = "sdio1";
+			};
+			slxd {
+				nvidia,pins = "slxd";
+				nvidia,function = "spdif";
+			};
+			spid {
+				nvidia,pins = "spid", "spie", "spif";
+				nvidia,function = "spi1";
+			};
+			spig {
+				nvidia,pins = "spig", "spih";
+				nvidia,function = "spi2_alt";
+			};
+			uaa {
+				nvidia,pins = "uaa", "uab", "uda";
+				nvidia,function = "ulpi";
+			};
+			uad {
+				nvidia,pins = "uad";
+				nvidia,function = "irda";
+			};
+			uca {
+				nvidia,pins = "uca", "ucb";
+				nvidia,function = "uartc";
+			};
+			conf_ata {
+				nvidia,pins = "ata", "atb", "atc", "atd",
+					"cdev1", "cdev2", "dap1", "dap2",
+					"dap4", "ddc", "dtf", "gma", "gmc",
+					"gme", "gpu", "gpu7", "i2cp", "irrx",
+					"irtx", "pta", "rm", "sdc", "sdd",
+					"slxc", "slxd", "slxk", "spdi", "spdo",
+					"uac", "uad", "uca", "ucb", "uda";
+				nvidia,pull = <0>;
+				nvidia,tristate = <0>;
+			};
+			conf_ate {
+				nvidia,pins = "ate", "csus", "dap3", "gmd",
+					"gpv", "owc", "spia", "spib", "spic",
+					"spid", "spie", "spig";
+				nvidia,pull = <0>;
+				nvidia,tristate = <1>;
+			};
+			conf_ck32 {
+				nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
+					"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
+				nvidia,pull = <0>;
+			};
+			conf_crtp {
+				nvidia,pins = "crtp", "gmb", "slxa", "spih";
+				nvidia,pull = <2>;
+				nvidia,tristate = <1>;
+			};
+			conf_dta {
+				nvidia,pins = "dta", "dtb", "dtc", "dtd";
+				nvidia,pull = <1>;
+				nvidia,tristate = <0>;
+			};
+			conf_dte {
+				nvidia,pins = "dte", "spif";
+				nvidia,pull = <1>;
+				nvidia,tristate = <1>;
+			};
+			conf_hdint {
+				nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
+					"lpw1", "lsck", "lsda", "lsdi", "lvp0";
+				nvidia,tristate = <1>;
+			};
+			conf_kbca {
+				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+					"kbce", "kbcf", "sdio1", "uaa", "uab";
+				nvidia,pull = <2>;
+				nvidia,tristate = <0>;
+			};
+			conf_lc {
+				nvidia,pins = "lc", "ls";
+				nvidia,pull = <2>;
+			};
+			conf_ld0 {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+					"ld5", "ld6", "ld7", "ld8", "ld9",
+					"ld10", "ld11", "ld12", "ld13", "ld14",
+					"ld15", "ld16", "ld17", "ldi", "lhp0",
+					"lhp1", "lhp2", "lhs", "lm0", "lpp",
+					"lpw0", "lpw2", "lsc0", "lsc1", "lspi",
+					"lvp1", "lvs", "pmc", "sdb";
+				nvidia,tristate = <0>;
+			};
+			conf_ld17_0 {
+				nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
+					"ld23_22";
+				nvidia,pull = <1>;
+			};
+		};
+	};
+
+	i2s@70002800 {
+		status = "okay";
+	};
+
+	serial@70006300 {
+		status = "okay";
+		clock-frequency = <216000000>;
 	};
 
 	i2c@7000c000 {
+		status = "okay";
 		clock-frequency = <400000>;
 
 		wm8903: wm8903@1a {
 			compatible = "wlf,wm8903";
 			reg = <0x1a>;
 			interrupt-parent = <&gpio>;
-			interrupts = < 187 0x04 >;
+			interrupts = <187 0x04>;
 
 			gpio-controller;
 			#gpio-cells = <2>;
 
 			micdet-cfg = <0>;
 			micdet-delay = <100>;
-			gpio-cfg = < 0xffffffff 0xffffffff 0 0xffffffff 0xffffffff >;
+			gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
+		};
+
+		/* ALS and proximity sensor */
+		isl29018@44 {
+			compatible = "isil,isl29018";
+			reg = <0x44>;
+			interrupt-parent = <&gpio>;
+			interrupts = <202 0x04>; /*gpio PZ2 */
 		};
 	};
 
 	i2c@7000c400 {
+		status = "okay";
 		clock-frequency = <400000>;
 	};
 
 	i2c@7000c500 {
+		status = "okay";
 		clock-frequency = <400000>;
 	};
 
 	i2c@7000d000 {
+		status = "okay";
 		clock-frequency = <400000>;
 	};
 
-	i2s@70002a00 {
-		status = "disable";
+	usb@c5000000 {
+		status = "okay";
+	};
+
+	usb@c5004000 {
+		status = "okay";
+		nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */
+	};
+
+	usb@c5008000 {
+		status = "okay";
+	};
+
+	sdhci@c8000400 {
+		status = "okay";
+		cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+		wp-gpios = <&gpio 57 0>; /* gpio PH1 */
+		power-gpios = <&gpio 70 0>; /* gpio PI6 */
+		bus-width = <4>;
+	};
+
+	sdhci@c8000600 {
+		status = "okay";
+		support-8bit;
+		bus-width = <8>;
 	};
 
 	sound {
@@ -64,45 +338,7 @@
 
 		nvidia,spkr-en-gpios = <&wm8903 2 0>;
 		nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
-		nvidia,int-mic-en-gpios = <&gpio 184 0>; /*gpio PX0 */
+		nvidia,int-mic-en-gpios = <&gpio 184 0>; /* gpio PX0 */
 		nvidia,ext-mic-en-gpios = <&gpio 185 0>; /* gpio PX1 */
 	};
-
-	serial@70006000 {
-		status = "disable";
-	};
-
-	serial@70006040 {
-		status = "disable";
-	};
-
-	serial@70006200 {
-		status = "disable";
-	};
-
-	serial@70006300 {
-		clock-frequency = < 216000000 >;
-	};
-
-	serial@70006400 {
-		status = "disable";
-	};
-
-	sdhci@c8000000 {
-		status = "disable";
-	};
-
-	sdhci@c8000200 {
-		status = "disable";
-	};
-
-	sdhci@c8000400 {
-		cd-gpios = <&gpio 69 0>; /* gpio PI5 */
-		wp-gpios = <&gpio 57 0>; /* gpio PH1 */
-		power-gpios = <&gpio 70 0>; /* gpio PI6 */
-	};
-
-	sdhci@c8000600 {
-		support-8bit;
-	};
 };
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index 108e894a8926..c417d67e9027 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -4,207 +4,242 @@
 	compatible = "nvidia,tegra20";
 	interrupt-parent = <&intc>;
 
-	pmc@7000f400 {
-		compatible = "nvidia,tegra20-pmc";
-		reg = <0x7000e400 0x400>;
-	};
-
-	intc: interrupt-controller@50041000 {
+	intc: interrupt-controller {
 		compatible = "arm,cortex-a9-gic";
+		reg = <0x50041000 0x1000
+		       0x50040100 0x0100>;
 		interrupt-controller;
 		#interrupt-cells = <3>;
-		reg = < 0x50041000 0x1000 >,
-		      < 0x50040100 0x0100 >;
 	};
 
-	pmu {
-		compatible = "arm,cortex-a9-pmu";
-		interrupts = <0 56 0x04
-			      0 57 0x04>;
-	};
-
-	apbdma: dma@6000a000 {
+	apbdma: dma {
 		compatible = "nvidia,tegra20-apbdma";
 		reg = <0x6000a000 0x1200>;
-		interrupts = < 0 104 0x04
-			       0 105 0x04
-			       0 106 0x04
-			       0 107 0x04
-			       0 108 0x04
-			       0 109 0x04
-			       0 110 0x04
-			       0 111 0x04
-			       0 112 0x04
-			       0 113 0x04
-			       0 114 0x04
-			       0 115 0x04
-			       0 116 0x04
-			       0 117 0x04
-			       0 118 0x04
-			       0 119 0x04 >;
-	};
-
-	i2c@7000c000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "nvidia,tegra20-i2c";
-		reg = <0x7000C000 0x100>;
-		interrupts = < 0 38 0x04 >;
-	};
-
-	i2c@7000c400 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "nvidia,tegra20-i2c";
-		reg = <0x7000C400 0x100>;
-		interrupts = < 0 84 0x04 >;
+		interrupts = <0 104 0x04
+			      0 105 0x04
+			      0 106 0x04
+			      0 107 0x04
+			      0 108 0x04
+			      0 109 0x04
+			      0 110 0x04
+			      0 111 0x04
+			      0 112 0x04
+			      0 113 0x04
+			      0 114 0x04
+			      0 115 0x04
+			      0 116 0x04
+			      0 117 0x04
+			      0 118 0x04
+			      0 119 0x04>;
+	};
+
+	ahb {
+		compatible = "nvidia,tegra20-ahb";
+		reg = <0x6000c004 0x10c>; /* AHB Arbitration + Gizmo Controller */
+	};
+
+	gpio: gpio {
+		compatible = "nvidia,tegra20-gpio";
+		reg = <0x6000d000 0x1000>;
+		interrupts = <0 32 0x04
+			      0 33 0x04
+			      0 34 0x04
+			      0 35 0x04
+			      0 55 0x04
+			      0 87 0x04
+			      0 89 0x04>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		#interrupt-cells = <2>;
+		interrupt-controller;
 	};
 
-	i2c@7000c500 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "nvidia,tegra20-i2c";
-		reg = <0x7000C500 0x100>;
-		interrupts = < 0 92 0x04 >;
+	pinmux: pinmux {
+		compatible = "nvidia,tegra20-pinmux";
+		reg = <0x70000014 0x10   /* Tri-state registers */
+		       0x70000080 0x20   /* Mux registers */
+		       0x700000a0 0x14   /* Pull-up/down registers */
+		       0x70000868 0xa8>; /* Pad control registers */
 	};
 
-	i2c@7000d000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "nvidia,tegra20-i2c-dvc";
-		reg = <0x7000D000 0x200>;
-		interrupts = < 0 53 0x04 >;
+	das {
+		compatible = "nvidia,tegra20-das";
+		reg = <0x70000c00 0x80>;
 	};
 
 	tegra_i2s1: i2s@70002800 {
 		compatible = "nvidia,tegra20-i2s";
 		reg = <0x70002800 0x200>;
-		interrupts = < 0 13 0x04 >;
-		nvidia,dma-request-selector = < &apbdma 2 >;
+		interrupts = <0 13 0x04>;
+		nvidia,dma-request-selector = <&apbdma 2>;
+		status = "disable";
 	};
 
 	tegra_i2s2: i2s@70002a00 {
 		compatible = "nvidia,tegra20-i2s";
 		reg = <0x70002a00 0x200>;
-		interrupts = < 0 3 0x04 >;
-		nvidia,dma-request-selector = < &apbdma 1 >;
-	};
-
-	das@70000c00 {
-		compatible = "nvidia,tegra20-das";
-		reg = <0x70000c00 0x80>;
-	};
-
-	gpio: gpio@6000d000 {
-		compatible = "nvidia,tegra20-gpio";
-		reg = < 0x6000d000 0x1000 >;
-		interrupts = < 0 32 0x04
-			       0 33 0x04
-			       0 34 0x04
-			       0 35 0x04
-			       0 55 0x04
-			       0 87 0x04
-			       0 89 0x04 >;
-		#gpio-cells = <2>;
-		gpio-controller;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-	};
-
-	pinmux: pinmux@70000000 {
-		compatible = "nvidia,tegra20-pinmux";
-		reg = < 0x70000014 0x10    /* Tri-state registers */
-			0x70000080 0x20    /* Mux registers */
-			0x700000a0 0x14    /* Pull-up/down registers */
-			0x70000868 0xa8 >; /* Pad control registers */
+		interrupts = <0 3 0x04>;
+		nvidia,dma-request-selector = <&apbdma 1>;
+		status = "disable";
 	};
 
 	serial@70006000 {
 		compatible = "nvidia,tegra20-uart";
 		reg = <0x70006000 0x40>;
 		reg-shift = <2>;
-		interrupts = < 0 36 0x04 >;
+		interrupts = <0 36 0x04>;
+		status = "disable";
 	};
 
 	serial@70006040 {
 		compatible = "nvidia,tegra20-uart";
 		reg = <0x70006040 0x40>;
 		reg-shift = <2>;
-		interrupts = < 0 37 0x04 >;
+		interrupts = <0 37 0x04>;
+		status = "disable";
 	};
 
 	serial@70006200 {
 		compatible = "nvidia,tegra20-uart";
 		reg = <0x70006200 0x100>;
 		reg-shift = <2>;
-		interrupts = < 0 46 0x04 >;
+		interrupts = <0 46 0x04>;
+		status = "disable";
 	};
 
 	serial@70006300 {
 		compatible = "nvidia,tegra20-uart";
 		reg = <0x70006300 0x100>;
 		reg-shift = <2>;
-		interrupts = < 0 90 0x04 >;
+		interrupts = <0 90 0x04>;
+		status = "disable";
 	};
 
 	serial@70006400 {
 		compatible = "nvidia,tegra20-uart";
 		reg = <0x70006400 0x100>;
 		reg-shift = <2>;
-		interrupts = < 0 91 0x04 >;
+		interrupts = <0 91 0x04>;
+		status = "disable";
 	};
 
-	emc@7000f400 {
+	i2c@7000c000 {
+		compatible = "nvidia,tegra20-i2c";
+		reg = <0x7000c000 0x100>;
+		interrupts = <0 38 0x04>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "nvidia,tegra20-emc";
-		reg = <0x7000f400 0x200>;
+		status = "disable";
 	};
 
-	sdhci@c8000000 {
-		compatible = "nvidia,tegra20-sdhci";
-		reg = <0xc8000000 0x200>;
-		interrupts = < 0 14 0x04 >;
+	i2c@7000c400 {
+		compatible = "nvidia,tegra20-i2c";
+		reg = <0x7000c400 0x100>;
+		interrupts = <0 84 0x04>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disable";
 	};
 
-	sdhci@c8000200 {
-		compatible = "nvidia,tegra20-sdhci";
-		reg = <0xc8000200 0x200>;
-		interrupts = < 0 15 0x04 >;
+	i2c@7000c500 {
+		compatible = "nvidia,tegra20-i2c";
+		reg = <0x7000c500 0x100>;
+		interrupts = <0 92 0x04>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disable";
 	};
 
-	sdhci@c8000400 {
-		compatible = "nvidia,tegra20-sdhci";
-		reg = <0xc8000400 0x200>;
-		interrupts = < 0 19 0x04 >;
+	i2c@7000d000 {
+		compatible = "nvidia,tegra20-i2c-dvc";
+		reg = <0x7000d000 0x200>;
+		interrupts = <0 53 0x04>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disable";
 	};
 
-	sdhci@c8000600 {
-		compatible = "nvidia,tegra20-sdhci";
-		reg = <0xc8000600 0x200>;
-		interrupts = < 0 31 0x04 >;
+	pmc {
+		compatible = "nvidia,tegra20-pmc";
+		reg = <0x7000e400 0x400>;
+	};
+
+	mc {
+		compatible = "nvidia,tegra20-mc";
+		reg = <0x7000f000 0x024
+		       0x7000f03c 0x3c4>;
+		interrupts = <0 77 0x04>;
+	};
+
+	gart {
+		compatible = "nvidia,tegra20-gart";
+		reg = <0x7000f024 0x00000018	/* controller registers */
+		       0x58000000 0x02000000>;	/* GART aperture */
+	};
+
+	emc {
+		compatible = "nvidia,tegra20-emc";
+		reg = <0x7000f400 0x200>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 	};
 
 	usb@c5000000 {
 		compatible = "nvidia,tegra20-ehci", "usb-ehci";
 		reg = <0xc5000000 0x4000>;
-		interrupts = < 0 20 0x04 >;
+		interrupts = <0 20 0x04>;
 		phy_type = "utmi";
 		nvidia,has-legacy-mode;
+		status = "disable";
 	};
 
 	usb@c5004000 {
 		compatible = "nvidia,tegra20-ehci", "usb-ehci";
 		reg = <0xc5004000 0x4000>;
-		interrupts = < 0 21 0x04 >;
+		interrupts = <0 21 0x04>;
 		phy_type = "ulpi";
+		status = "disable";
 	};
 
 	usb@c5008000 {
 		compatible = "nvidia,tegra20-ehci", "usb-ehci";
 		reg = <0xc5008000 0x4000>;
-		interrupts = < 0 97 0x04 >;
+		interrupts = <0 97 0x04>;
 		phy_type = "utmi";
+		status = "disable";
+	};
+
+	sdhci@c8000000 {
+		compatible = "nvidia,tegra20-sdhci";
+		reg = <0xc8000000 0x200>;
+		interrupts = <0 14 0x04>;
+		status = "disable";
 	};
-};
 
+	sdhci@c8000200 {
+		compatible = "nvidia,tegra20-sdhci";
+		reg = <0xc8000200 0x200>;
+		interrupts = <0 15 0x04>;
+		status = "disable";
+	};
+
+	sdhci@c8000400 {
+		compatible = "nvidia,tegra20-sdhci";
+		reg = <0xc8000400 0x200>;
+		interrupts = <0 19 0x04>;
+		status = "disable";
+	};
+
+	sdhci@c8000600 {
+		compatible = "nvidia,tegra20-sdhci";
+		reg = <0xc8000600 0x200>;
+		interrupts = <0 31 0x04>;
+		status = "disable";
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <0 56 0x04
+			      0 57 0x04>;
+	};
+};
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index 62a7b39f1c9a..2dcc09e784b5 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -4,183 +4,268 @@
 	compatible = "nvidia,tegra30";
 	interrupt-parent = <&intc>;
 
-	pmc@7000f400 {
-		compatible = "nvidia,tegra20-pmc", "nvidia,tegra30-pmc";
-		reg = <0x7000e400 0x400>;
-	};
-
-	intc: interrupt-controller@50041000 {
+	intc: interrupt-controller {
 		compatible = "arm,cortex-a9-gic";
+		reg = <0x50041000 0x1000
+		       0x50040100 0x0100>;
 		interrupt-controller;
 		#interrupt-cells = <3>;
-		reg = < 0x50041000 0x1000 >,
-		      < 0x50040100 0x0100 >;
 	};
 
-	pmu {
-		compatible = "arm,cortex-a9-pmu";
-		interrupts = <0 144 0x04
-			      0 145 0x04
-			      0 146 0x04
-			      0 147 0x04>;
-	};
-
-	apbdma: dma@6000a000 {
+	apbdma: dma {
 		compatible = "nvidia,tegra30-apbdma", "nvidia,tegra20-apbdma";
 		reg = <0x6000a000 0x1400>;
-		interrupts = < 0 104 0x04
-			       0 105 0x04
-			       0 106 0x04
-			       0 107 0x04
-			       0 108 0x04
-			       0 109 0x04
-			       0 110 0x04
-			       0 111 0x04
-			       0 112 0x04
-			       0 113 0x04
-			       0 114 0x04
-			       0 115 0x04
-			       0 116 0x04
-			       0 117 0x04
-			       0 118 0x04
-			       0 119 0x04
-			       0 128 0x04
-			       0 129 0x04
-			       0 130 0x04
-			       0 131 0x04
-			       0 132 0x04
-			       0 133 0x04
-			       0 134 0x04
-			       0 135 0x04
-			       0 136 0x04
-			       0 137 0x04
-			       0 138 0x04
-			       0 139 0x04
-			       0 140 0x04
-			       0 141 0x04
-			       0 142 0x04
-			       0 143 0x04 >;
-	};
-
-	i2c@7000c000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible =  "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
-		reg = <0x7000C000 0x100>;
-		interrupts = < 0 38 0x04 >;
-	};
-
-	i2c@7000c400 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
-		reg = <0x7000C400 0x100>;
-		interrupts = < 0 84 0x04 >;
-	};
-
-	i2c@7000c500 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
-		reg = <0x7000C500 0x100>;
-		interrupts = < 0 92 0x04 >;
+		interrupts = <0 104 0x04
+			      0 105 0x04
+			      0 106 0x04
+			      0 107 0x04
+			      0 108 0x04
+			      0 109 0x04
+			      0 110 0x04
+			      0 111 0x04
+			      0 112 0x04
+			      0 113 0x04
+			      0 114 0x04
+			      0 115 0x04
+			      0 116 0x04
+			      0 117 0x04
+			      0 118 0x04
+			      0 119 0x04
+			      0 128 0x04
+			      0 129 0x04
+			      0 130 0x04
+			      0 131 0x04
+			      0 132 0x04
+			      0 133 0x04
+			      0 134 0x04
+			      0 135 0x04
+			      0 136 0x04
+			      0 137 0x04
+			      0 138 0x04
+			      0 139 0x04
+			      0 140 0x04
+			      0 141 0x04
+			      0 142 0x04
+			      0 143 0x04>;
 	};
 
-	i2c@7000c700 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
-		reg = <0x7000c700 0x100>;
-		interrupts = < 0 120 0x04 >;
+	ahb: ahb {
+		compatible = "nvidia,tegra30-ahb";
+		reg = <0x6000c004 0x14c>; /* AHB Arbitration + Gizmo Controller */
 	};
 
-	i2c@7000d000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
-		reg = <0x7000D000 0x100>;
-		interrupts = < 0 53 0x04 >;
-	};
-
-	gpio: gpio@6000d000 {
+	gpio: gpio {
 		compatible = "nvidia,tegra30-gpio", "nvidia,tegra20-gpio";
-		reg = < 0x6000d000 0x1000 >;
-		interrupts = < 0 32 0x04
-			       0 33 0x04
-			       0 34 0x04
-			       0 35 0x04
-			       0 55 0x04
-			       0 87 0x04
-			       0 89 0x04
-			       0 125 0x04 >;
+		reg = <0x6000d000 0x1000>;
+		interrupts = <0 32 0x04
+			      0 33 0x04
+			      0 34 0x04
+			      0 35 0x04
+			      0 55 0x04
+			      0 87 0x04
+			      0 89 0x04
+			      0 125 0x04>;
 		#gpio-cells = <2>;
 		gpio-controller;
 		#interrupt-cells = <2>;
 		interrupt-controller;
 	};
 
+	pinmux: pinmux {
+		compatible = "nvidia,tegra30-pinmux";
+		reg = <0x70000868 0xd0    /* Pad control registers */
+		       0x70003000 0x3e0>; /* Mux registers */
+	};
+
 	serial@70006000 {
 		compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
 		reg = <0x70006000 0x40>;
 		reg-shift = <2>;
-		interrupts = < 0 36 0x04 >;
+		interrupts = <0 36 0x04>;
+		status = "disable";
 	};
 
 	serial@70006040 {
 		compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
 		reg = <0x70006040 0x40>;
 		reg-shift = <2>;
-		interrupts = < 0 37 0x04 >;
+		interrupts = <0 37 0x04>;
+		status = "disable";
 	};
 
 	serial@70006200 {
 		compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
 		reg = <0x70006200 0x100>;
 		reg-shift = <2>;
-		interrupts = < 0 46 0x04 >;
+		interrupts = <0 46 0x04>;
+		status = "disable";
 	};
 
 	serial@70006300 {
 		compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
 		reg = <0x70006300 0x100>;
 		reg-shift = <2>;
-		interrupts = < 0 90 0x04 >;
+		interrupts = <0 90 0x04>;
+		status = "disable";
 	};
 
 	serial@70006400 {
 		compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
 		reg = <0x70006400 0x100>;
 		reg-shift = <2>;
-		interrupts = < 0 91 0x04 >;
+		interrupts = <0 91 0x04>;
+		status = "disable";
+	};
+
+	i2c@7000c000 {
+		compatible =  "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
+		reg = <0x7000c000 0x100>;
+		interrupts = <0 38 0x04>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disable";
+	};
+
+	i2c@7000c400 {
+		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
+		reg = <0x7000c400 0x100>;
+		interrupts = <0 84 0x04>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disable";
+	};
+
+	i2c@7000c500 {
+		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
+		reg = <0x7000c500 0x100>;
+		interrupts = <0 92 0x04>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disable";
+	};
+
+	i2c@7000c700 {
+		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
+		reg = <0x7000c700 0x100>;
+		interrupts = <0 120 0x04>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disable";
+	};
+
+	i2c@7000d000 {
+		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
+		reg = <0x7000d000 0x100>;
+		interrupts = <0 53 0x04>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disable";
+	};
+
+	pmc {
+		compatible = "nvidia,tegra20-pmc", "nvidia,tegra30-pmc";
+		reg = <0x7000e400 0x400>;
+	};
+
+	mc {
+		compatible = "nvidia,tegra30-mc";
+		reg = <0x7000f000 0x010
+		       0x7000f03c 0x1b4
+		       0x7000f200 0x028
+		       0x7000f284 0x17c>;
+		interrupts = <0 77 0x04>;
+	};
+
+	smmu {
+		compatible = "nvidia,tegra30-smmu";
+		reg = <0x7000f010 0x02c
+		       0x7000f1f0 0x010
+		       0x7000f228 0x05c>;
+		nvidia,#asids = <4>;		/* # of ASIDs */
+		dma-window = <0 0x40000000>;	/* IOVA start & length */
+		nvidia,ahb = <&ahb>;
+	};
+
+	ahub {
+		compatible = "nvidia,tegra30-ahub";
+		reg = <0x70080000 0x200
+		       0x70080200 0x100>;
+		interrupts = <0 103 0x04>;
+		nvidia,dma-request-selector = <&apbdma 1>;
+
+		ranges;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		tegra_i2s0: i2s@70080300 {
+			compatible = "nvidia,tegra30-i2s";
+			reg = <0x70080300 0x100>;
+			nvidia,ahub-cif-ids = <4 4>;
+			status = "disable";
+		};
+
+		tegra_i2s1: i2s@70080400 {
+			compatible = "nvidia,tegra30-i2s";
+			reg = <0x70080400 0x100>;
+			nvidia,ahub-cif-ids = <5 5>;
+			status = "disable";
+		};
+
+		tegra_i2s2: i2s@70080500 {
+			compatible = "nvidia,tegra30-i2s";
+			reg = <0x70080500 0x100>;
+			nvidia,ahub-cif-ids = <6 6>;
+			status = "disable";
+		};
+
+		tegra_i2s3: i2s@70080600 {
+			compatible = "nvidia,tegra30-i2s";
+			reg = <0x70080600 0x100>;
+			nvidia,ahub-cif-ids = <7 7>;
+			status = "disable";
+		};
+
+		tegra_i2s4: i2s@70080700 {
+			compatible = "nvidia,tegra30-i2s";
+			reg = <0x70080700 0x100>;
+			nvidia,ahub-cif-ids = <8 8>;
+			status = "disable";
+		};
 	};
 
 	sdhci@78000000 {
 		compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
 		reg = <0x78000000 0x200>;
-		interrupts = < 0 14 0x04 >;
+		interrupts = <0 14 0x04>;
+		status = "disable";
 	};
 
 	sdhci@78000200 {
 		compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
 		reg = <0x78000200 0x200>;
-		interrupts = < 0 15 0x04 >;
+		interrupts = <0 15 0x04>;
+		status = "disable";
 	};
 
 	sdhci@78000400 {
 		compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
 		reg = <0x78000400 0x200>;
-		interrupts = < 0 19 0x04 >;
+		interrupts = <0 19 0x04>;
+		status = "disable";
 	};
 
 	sdhci@78000600 {
 		compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
 		reg = <0x78000600 0x200>;
-		interrupts = < 0 31 0x04 >;
+		interrupts = <0 31 0x04>;
+		status = "disable";
 	};
 
-	pinmux: pinmux@70000000 {
-		compatible = "nvidia,tegra30-pinmux";
-		reg = < 0x70000868 0xd0     /* Pad control registers */
-			0x70003000 0x3e0 >; /* Mux registers */
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <0 144 0x04
+			      0 145 0x04
+			      0 146 0x04
+			      0 147 0x04>;
 	};
 };
diff --git a/arch/arm/boot/dts/tny_a9260.dts b/arch/arm/boot/dts/tny_a9260.dts
new file mode 100644
index 000000000000..367a16dcd5ef
--- /dev/null
+++ b/arch/arm/boot/dts/tny_a9260.dts
@@ -0,0 +1,15 @@
+/*
+ * tny_a9260.dts - Device Tree file for Caloa TNY A9260 board
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+/dts-v1/;
+/include/ "at91sam9260.dtsi"
+/include/ "tny_a9260_common.dtsi"
+
+/ {
+	model = "Calao TNY A9260";
+	compatible = "calao,tny-a9260", "atmel,at91sam9260", "atmel,at91sam9";
+};
diff --git a/arch/arm/boot/dts/tny_a9260_common.dtsi b/arch/arm/boot/dts/tny_a9260_common.dtsi
new file mode 100644
index 000000000000..0e6d3de2e09e
--- /dev/null
+++ b/arch/arm/boot/dts/tny_a9260_common.dtsi
@@ -0,0 +1,83 @@
+/*
+ * tny_a9260_common.dtsi - Device Tree file for Caloa TNY A926x board
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+/ {
+	chosen {
+		bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock6 rw rootfstype=ubifs";
+	};
+
+	memory {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		main_clock: clock@0 {
+			compatible = "atmel,osc", "fixed-clock";
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			nand-on-flash-bbt;
+			status = "okay";
+
+			at91bootstrap@0 {
+				label = "at91bootstrap";
+				reg = <0x0 0x20000>;
+			};
+
+			barebox@20000 {
+				label = "barebox";
+				reg = <0x20000 0x40000>;
+			};
+
+			bareboxenv@60000 {
+				label = "bareboxenv";
+				reg = <0x60000 0x20000>;
+			};
+
+			bareboxenv2@80000 {
+				label = "bareboxenv2";
+				reg = <0x80000 0x20000>;
+			};
+
+			oftree@80000 {
+				label = "oftree";
+				reg = <0xa0000 0x20000>;
+			};
+
+			kernel@a0000 {
+				label = "kernel";
+				reg = <0xc0000 0x400000>;
+			};
+
+			rootfs@4a0000 {
+				label = "rootfs";
+				reg = <0x4c0000 0x7800000>;
+			};
+
+			data@7ca0000 {
+				label = "data";
+				reg = <0x7cc0000 0x8340000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tny_a9263.dts b/arch/arm/boot/dts/tny_a9263.dts
new file mode 100644
index 000000000000..dee9c571306b
--- /dev/null
+++ b/arch/arm/boot/dts/tny_a9263.dts
@@ -0,0 +1,97 @@
+/*
+ * usb_a9263.dts - Device Tree file for Caloa USB A9293 board
+ *
+ *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2 only
+ */
+/dts-v1/;
+/include/ "at91sam9263.dtsi"
+
+/ {
+	model = "Calao TNY A9263";
+	compatible = "atmel,tny-a9263", "atmel,at91sam9263", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
+	};
+
+	memory {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		main_clock: clock@0 {
+			compatible = "atmel,osc", "fixed-clock";
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			dbgu: serial@ffffee00 {
+				status = "okay";
+			};
+
+			usb1: gadget@fff78000 {
+				atmel,vbus-gpio = <&pioB 11 0>;
+				status = "okay";
+			};
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			nand-on-flash-bbt;
+			status = "okay";
+
+			at91bootstrap@0 {
+				label = "at91bootstrap";
+				reg = <0x0 0x20000>;
+			};
+
+			barebox@20000 {
+				label = "barebox";
+				reg = <0x20000 0x40000>;
+			};
+
+			bareboxenv@60000 {
+				label = "bareboxenv";
+				reg = <0x60000 0x20000>;
+			};
+
+			bareboxenv2@80000 {
+				label = "bareboxenv2";
+				reg = <0x80000 0x20000>;
+			};
+
+			oftree@80000 {
+				label = "oftree";
+				reg = <0xa0000 0x20000>;
+			};
+
+			kernel@a0000 {
+				label = "kernel";
+				reg = <0xc0000 0x400000>;
+			};
+
+			rootfs@4a0000 {
+				label = "rootfs";
+				reg = <0x4c0000 0x7800000>;
+			};
+
+			data@7ca0000 {
+				label = "data";
+				reg = <0x7cc0000 0x8340000>;
+			};
+		};
+	};
+
+	i2c@0 {
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/tny_a9g20.dts b/arch/arm/boot/dts/tny_a9g20.dts
new file mode 100644
index 000000000000..e1ab64c72dba
--- /dev/null
+++ b/arch/arm/boot/dts/tny_a9g20.dts
@@ -0,0 +1,15 @@
+/*
+ * tny_a9g20.dts - Device Tree file for Caloa TNY A9G20 board
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+/dts-v1/;
+/include/ "at91sam9g20.dtsi"
+/include/ "tny_a9260_common.dtsi"
+
+/ {
+	model = "Calao TNY A9G20";
+	compatible = "calao,tny-a9g20", "atmel,at91sam9g20", "atmel,at91sam9";
+};
diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi
new file mode 100644
index 000000000000..22f4d1394ed3
--- /dev/null
+++ b/arch/arm/boot/dts/twl4030.dtsi
@@ -0,0 +1,47 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Integrated Power Management Chip
+ */
+&twl {
+	compatible = "ti,twl4030";
+	interrupt-controller;
+	#interrupt-cells = <1>;
+
+	rtc {
+		compatible = "ti,twl4030-rtc";
+		interrupts = <11>;
+	};
+
+	vdac: regulator@0 {
+		compatible = "ti,twl4030-vdac";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vpll2: regulator@1 {
+		compatible = "ti,twl4030-vpll2";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vmmc1: regulator@2 {
+		compatible = "ti,twl4030-vmmc1";
+		regulator-min-microvolt = <1850000>;
+		regulator-max-microvolt = <3150000>;
+	};
+
+	twl_gpio: gpio {
+		compatible = "ti,twl4030-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
diff --git a/arch/arm/boot/dts/twl6030.dtsi b/arch/arm/boot/dts/twl6030.dtsi
new file mode 100644
index 000000000000..3b2f3510d7eb
--- /dev/null
+++ b/arch/arm/boot/dts/twl6030.dtsi
@@ -0,0 +1,86 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Integrated Power Management Chip
+ * http://www.ti.com/lit/ds/symlink/twl6030.pdf
+ */
+&twl {
+	compatible = "ti,twl6030";
+	interrupt-controller;
+	#interrupt-cells = <1>;
+
+	rtc {
+		compatible = "ti,twl4030-rtc";
+		interrupts = <11>;
+	};
+
+	vaux1: regulator@0 {
+		compatible = "ti,twl6030-vaux1";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <3000000>;
+	};
+
+	vaux2: regulator@1 {
+		compatible = "ti,twl6030-vaux2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <2800000>;
+	};
+
+	vaux3: regulator@2 {
+		compatible = "ti,twl6030-vaux3";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <3000000>;
+	};
+
+	vmmc: regulator@3 {
+		compatible = "ti,twl6030-vmmc";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <3000000>;
+	};
+
+	vpp: regulator@4 {
+		compatible = "ti,twl6030-vpp";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <2500000>;
+	};
+
+	vusim: regulator@5 {
+		compatible = "ti,twl6030-vusim";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <2900000>;
+	};
+
+	vdac: regulator@6 {
+		compatible = "ti,twl6030-vdac";
+	};
+
+	vana: regulator@7 {
+		compatible = "ti,twl6030-vana";
+	};
+
+	vcxio: regulator@8 {
+		compatible = "ti,twl6030-vcxio";
+	};
+
+	vusb: regulator@9 {
+		compatible = "ti,twl6030-vusb";
+	};
+
+	v1v8: regulator@10 {
+		compatible = "ti,twl6030-v1v8";
+	};
+
+	v2v1: regulator@11 {
+		compatible = "ti,twl6030-v2v1";
+	};
+
+	clk32kg: regulator@12 {
+		compatible = "ti,twl6030-clk32kg";
+	};
+};
diff --git a/arch/arm/boot/dts/usb_a9260.dts b/arch/arm/boot/dts/usb_a9260.dts
new file mode 100644
index 000000000000..296216058c11
--- /dev/null
+++ b/arch/arm/boot/dts/usb_a9260.dts
@@ -0,0 +1,23 @@
+/*
+ * usb_a9260.dts - Device Tree file for Caloa USB A9260 board
+ *
+ *  Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+/include/ "at91sam9260.dtsi"
+/include/ "usb_a9260_common.dtsi"
+
+/ {
+	model = "Calao USB A9260";
+	compatible = "calao,usb-a9260", "atmel,at91sam9260", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
+	};
+
+	memory {
+		reg = <0x20000000 0x4000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/usb_a9260_common.dtsi b/arch/arm/boot/dts/usb_a9260_common.dtsi
new file mode 100644
index 000000000000..e70d229baef5
--- /dev/null
+++ b/arch/arm/boot/dts/usb_a9260_common.dtsi
@@ -0,0 +1,117 @@
+/*
+ * usb_a926x.dts - Device Tree file for Caloa USB A926x board
+ *
+ *  Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/ {
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		main_clock: clock@0 {
+			compatible = "atmel,osc", "fixed-clock";
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			macb0: ethernet@fffc4000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			usb1: gadget@fffa4000 {
+				atmel,vbus-gpio = <&pioC 5 0>;
+				status = "okay";
+			};
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			nand-on-flash-bbt;
+			status = "okay";
+
+			at91bootstrap@0 {
+				label = "at91bootstrap";
+				reg = <0x0 0x20000>;
+			};
+
+			barebox@20000 {
+				label = "barebox";
+				reg = <0x20000 0x40000>;
+			};
+
+			bareboxenv@60000 {
+				label = "bareboxenv";
+				reg = <0x60000 0x20000>;
+			};
+
+			bareboxenv2@80000 {
+				label = "bareboxenv2";
+				reg = <0x80000 0x20000>;
+			};
+
+			oftree@80000 {
+				label = "oftree";
+				reg = <0xa0000 0x20000>;
+			};
+
+			kernel@a0000 {
+				label = "kernel";
+				reg = <0xc0000 0x400000>;
+			};
+
+			rootfs@4a0000 {
+				label = "rootfs";
+				reg = <0x4c0000 0x7800000>;
+			};
+
+			data@7ca0000 {
+				label = "data";
+				reg = <0x7cc0000 0x8340000>;
+			};
+		};
+
+		usb0: ohci@00500000 {
+			num-ports = <2>;
+			status = "okay";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user_led {
+			label = "user_led";
+			gpios = <&pioB 21 1>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user_pb {
+			label = "user_pb";
+			gpios = <&pioB 10 1>;
+			linux,code = <28>;
+			gpio-key,wakeup;
+		};
+	};
+
+	i2c@0 {
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/usb_a9263.dts b/arch/arm/boot/dts/usb_a9263.dts
new file mode 100644
index 000000000000..6fe05ccb6203
--- /dev/null
+++ b/arch/arm/boot/dts/usb_a9263.dts
@@ -0,0 +1,131 @@
+/*
+ * usb_a9263.dts - Device Tree file for Caloa USB A9293 board
+ *
+ *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2 only
+ */
+/dts-v1/;
+/include/ "at91sam9263.dtsi"
+
+/ {
+	model = "Calao USB A9263";
+	compatible = "atmel,usb-a9263", "atmel,at91sam9263", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
+	};
+
+	memory {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		main_clock: clock@0 {
+			compatible = "atmel,osc", "fixed-clock";
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			dbgu: serial@ffffee00 {
+				status = "okay";
+			};
+
+			macb0: ethernet@fffbc000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			usb1: gadget@fff78000 {
+				atmel,vbus-gpio = <&pioB 11 0>;
+				status = "okay";
+			};
+
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			nand-on-flash-bbt;
+			status = "okay";
+
+			at91bootstrap@0 {
+				label = "at91bootstrap";
+				reg = <0x0 0x20000>;
+			};
+
+			barebox@20000 {
+				label = "barebox";
+				reg = <0x20000 0x40000>;
+			};
+
+			bareboxenv@60000 {
+				label = "bareboxenv";
+				reg = <0x60000 0x20000>;
+			};
+
+			bareboxenv2@80000 {
+				label = "bareboxenv2";
+				reg = <0x80000 0x20000>;
+			};
+
+			oftree@80000 {
+				label = "oftree";
+				reg = <0xa0000 0x20000>;
+			};
+
+			kernel@a0000 {
+				label = "kernel";
+				reg = <0xc0000 0x400000>;
+			};
+
+			rootfs@4a0000 {
+				label = "rootfs";
+				reg = <0x4c0000 0x7800000>;
+			};
+
+			data@7ca0000 {
+				label = "data";
+				reg = <0x7cc0000 0x8340000>;
+			};
+		};
+
+		usb0: ohci@00a00000 {
+			num-ports = <2>;
+			status = "okay";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user_led {
+			label = "user_led";
+			gpios = <&pioB 21 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user_pb {
+			label = "user_pb";
+			gpios = <&pioB 10 1>;
+			linux,code = <28>;
+			gpio-key,wakeup;
+		};
+	};
+
+	i2c@0 {
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/usb_a9g20.dts b/arch/arm/boot/dts/usb_a9g20.dts
index 3b3c4e0fa79f..2dacb16ce4ae 100644
--- a/arch/arm/boot/dts/usb_a9g20.dts
+++ b/arch/arm/boot/dts/usb_a9g20.dts
@@ -7,6 +7,7 @@
  */
 /dts-v1/;
 /include/ "at91sam9g20.dtsi"
+/include/ "usb_a9260_common.dtsi"
 
 / {
 	model = "Calao USB A9G20";
@@ -16,112 +17,11 @@
 		bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
 	};
 
-	memory@20000000 {
+	memory {
 		reg = <0x20000000 0x4000000>;
 	};
 
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <12000000>;
-		};
-	};
-
-	ahb {
-		apb {
-			dbgu: serial@fffff200 {
-				status = "okay";
-			};
-
-			macb0: ethernet@fffc4000 {
-				phy-mode = "rmii";
-				status = "okay";
-			};
-
-			usb1: gadget@fffa4000 {
-				atmel,vbus-gpio = <&pioC 5 0>;
-				status = "okay";
-			};
-		};
-
-		nand0: nand@40000000 {
-			nand-bus-width = <8>;
-			nand-ecc-mode = "soft";
-			nand-on-flash-bbt;
-			status = "okay";
-
-			at91bootstrap@0 {
-				label = "at91bootstrap";
-				reg = <0x0 0x20000>;
-			};
-
-			barebox@20000 {
-				label = "barebox";
-				reg = <0x20000 0x40000>;
-			};
-
-			bareboxenv@60000 {
-				label = "bareboxenv";
-				reg = <0x60000 0x20000>;
-			};
-
-			bareboxenv2@80000 {
-				label = "bareboxenv2";
-				reg = <0x80000 0x20000>;
-			};
-
-			kernel@a0000 {
-				label = "kernel";
-				reg = <0xa0000 0x400000>;
-			};
-
-			rootfs@4a0000 {
-				label = "rootfs";
-				reg = <0x4a0000 0x7800000>;
-			};
-
-			data@7ca0000 {
-				label = "data";
-				reg = <0x7ca0000 0x8360000>;
-			};
-		};
-
-		usb0: ohci@00500000 {
-			num-ports = <2>;
-			status = "okay";
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		user_led {
-			label = "user_led";
-			gpios = <&pioB 21 1>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		user_pb {
-			label = "user_pb";
-			gpios = <&pioB 10 1>;
-			linux,code = <28>;
-			gpio-key,wakeup;
-		};
-	};
-
 	i2c@0 {
-		status = "okay";
-
 		rv3029c2@56 {
 			compatible = "rv3029c2";
 			reg = <0x56>;
diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts
index 0b32925f2147..e2fe3195c0d1 100644
--- a/arch/arm/boot/dts/versatile-ab.dts
+++ b/arch/arm/boot/dts/versatile-ab.dts
@@ -173,7 +173,7 @@
 			mmc@5000 {
 				compatible = "arm,primecell";
 				reg = < 0x5000 0x1000>;
-				interrupts = <22>;
+				interrupts = <22 34>;
 			};
 			kmi@6000 {
 				compatible = "arm,pl050", "arm,primecell";
diff --git a/arch/arm/boot/dts/versatile-pb.dts b/arch/arm/boot/dts/versatile-pb.dts
index 166461073b78..7e8175269064 100644
--- a/arch/arm/boot/dts/versatile-pb.dts
+++ b/arch/arm/boot/dts/versatile-pb.dts
@@ -41,7 +41,7 @@
 			mmc@b000 {
 				compatible = "arm,primecell";
 				reg = <0xb000 0x1000>;
-				interrupts = <23>;
+				interrupts = <23 34>;
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
index 941b161ab78c..7e1091d91af8 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
@@ -73,7 +73,10 @@
 		#address-cells = <0>;
 		interrupt-controller;
 		reg = <0x2c001000 0x1000>,
-		      <0x2c002000 0x100>;
+		      <0x2c002000 0x1000>,
+		      <0x2c004000 0x2000>,
+		      <0x2c006000 0x2000>;
+		interrupts = <1 9 0xf04>;
 	};
 
 	memory-controller@7ffd0000 {
@@ -93,6 +96,14 @@
 			     <0 91 4>;
 	};
 
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <1 13 0xf08>,
+			     <1 14 0xf08>,
+			     <1 11 0xf08>,
+			     <1 10 0xf08>;
+	};
+
 	pmu {
 		compatible = "arm,cortex-a15-pmu", "arm,cortex-a9-pmu";
 		interrupts = <0 68 4>,
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
index 6905e66d4748..18917a0f8604 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
@@ -77,13 +77,18 @@
 
 	timer@2c000600 {
 		compatible = "arm,cortex-a5-twd-timer";
-		reg = <0x2c000600 0x38>;
-		interrupts = <1 2 0x304>,
-			     <1 3 0x304>;
+		reg = <0x2c000600 0x20>;
+		interrupts = <1 13 0x304>;
+	};
+
+	watchdog@2c000620 {
+		compatible = "arm,cortex-a5-twd-wdt";
+		reg = <0x2c000620 0x20>;
+		interrupts = <1 14 0x304>;
 	};
 
 	gic: interrupt-controller@2c001000 {
-		compatible = "arm,corex-a5-gic", "arm,cortex-a9-gic";
+		compatible = "arm,cortex-a5-gic", "arm,cortex-a9-gic";
 		#interrupt-cells = <3>;
 		#address-cells = <0>;
 		interrupt-controller;
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/vexpress-v2p-ca9.dts
index da778693be54..3f0c736d31d6 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca9.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca9.dts
@@ -105,8 +105,13 @@
 	timer@1e000600 {
 		compatible = "arm,cortex-a9-twd-timer";
 		reg = <0x1e000600 0x20>;
-		interrupts = <1 2 0xf04>,
-			     <1 3 0xf04>;
+		interrupts = <1 13 0xf04>;
+	};
+
+	watchdog@1e000620 {
+		compatible = "arm,cortex-a9-twd-wdt";
+		reg = <0x1e000620 0x20>;
+		interrupts = <1 14 0xf04>;
 	};
 
 	gic: interrupt-controller@1e001000 {
diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile
index 215816f1775f..e8a4e58f1b82 100644
--- a/arch/arm/common/Makefile
+++ b/arch/arm/common/Makefile
@@ -11,7 +11,5 @@ obj-$(CONFIG_DMABOUNCE)		+= dmabounce.o
 obj-$(CONFIG_SHARP_LOCOMO)	+= locomo.o
 obj-$(CONFIG_SHARP_PARAM)	+= sharpsl_param.o
 obj-$(CONFIG_SHARP_SCOOP)	+= scoop.o
-obj-$(CONFIG_ARCH_IXP2000)	+= uengine.o
-obj-$(CONFIG_ARCH_IXP23XX)	+= uengine.o
 obj-$(CONFIG_PCI_HOST_ITE8152)  += it8152.o
 obj-$(CONFIG_ARM_TIMER_SP804)	+= timer-sp.o
diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c
index 595ecd290ebf..9d7eb530f95f 100644
--- a/arch/arm/common/dmabounce.c
+++ b/arch/arm/common/dmabounce.c
@@ -173,7 +173,8 @@ find_safe_buffer(struct dmabounce_device_info *device_info, dma_addr_t safe_dma_
 	read_lock_irqsave(&device_info->lock, flags);
 
 	list_for_each_entry(b, &device_info->safe_buffers, node)
-		if (b->safe_dma_addr == safe_dma_addr) {
+		if (b->safe_dma_addr <= safe_dma_addr &&
+		    b->safe_dma_addr + b->size > safe_dma_addr) {
 			rb = b;
 			break;
 		}
@@ -254,7 +255,7 @@ static inline dma_addr_t map_single(struct device *dev, void *ptr, size_t size,
 	if (buf == NULL) {
 		dev_err(dev, "%s: unable to map unsafe buffer %p!\n",
 		       __func__, ptr);
-		return ~0;
+		return DMA_ERROR_CODE;
 	}
 
 	dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n",
@@ -307,8 +308,9 @@ static inline void unmap_single(struct device *dev, struct safe_buffer *buf,
  * substitute the safe buffer for the unsafe one.
  * (basically move the buffer from an unsafe area to a safe one)
  */
-dma_addr_t __dma_map_page(struct device *dev, struct page *page,
-		unsigned long offset, size_t size, enum dma_data_direction dir)
+static dma_addr_t dmabounce_map_page(struct device *dev, struct page *page,
+		unsigned long offset, size_t size, enum dma_data_direction dir,
+		struct dma_attrs *attrs)
 {
 	dma_addr_t dma_addr;
 	int ret;
@@ -320,21 +322,20 @@ dma_addr_t __dma_map_page(struct device *dev, struct page *page,
 
 	ret = needs_bounce(dev, dma_addr, size);
 	if (ret < 0)
-		return ~0;
+		return DMA_ERROR_CODE;
 
 	if (ret == 0) {
-		__dma_page_cpu_to_dev(page, offset, size, dir);
+		arm_dma_ops.sync_single_for_device(dev, dma_addr, size, dir);
 		return dma_addr;
 	}
 
 	if (PageHighMem(page)) {
 		dev_err(dev, "DMA buffer bouncing of HIGHMEM pages is not supported\n");
-		return ~0;
+		return DMA_ERROR_CODE;
 	}
 
 	return map_single(dev, page_address(page) + offset, size, dir);
 }
-EXPORT_SYMBOL(__dma_map_page);
 
 /*
  * see if a mapped address was really a "safe" buffer and if so, copy
@@ -342,8 +343,8 @@ EXPORT_SYMBOL(__dma_map_page);
  * the safe buffer.  (basically return things back to the way they
  * should be)
  */
-void __dma_unmap_page(struct device *dev, dma_addr_t dma_addr, size_t size,
-		enum dma_data_direction dir)
+static void dmabounce_unmap_page(struct device *dev, dma_addr_t dma_addr, size_t size,
+		enum dma_data_direction dir, struct dma_attrs *attrs)
 {
 	struct safe_buffer *buf;
 
@@ -352,19 +353,18 @@ void __dma_unmap_page(struct device *dev, dma_addr_t dma_addr, size_t size,
 
 	buf = find_safe_buffer_dev(dev, dma_addr, __func__);
 	if (!buf) {
-		__dma_page_dev_to_cpu(pfn_to_page(dma_to_pfn(dev, dma_addr)),
-			dma_addr & ~PAGE_MASK, size, dir);
+		arm_dma_ops.sync_single_for_cpu(dev, dma_addr, size, dir);
 		return;
 	}
 
 	unmap_single(dev, buf, size, dir);
 }
-EXPORT_SYMBOL(__dma_unmap_page);
 
-int dmabounce_sync_for_cpu(struct device *dev, dma_addr_t addr,
-		unsigned long off, size_t sz, enum dma_data_direction dir)
+static int __dmabounce_sync_for_cpu(struct device *dev, dma_addr_t addr,
+		size_t sz, enum dma_data_direction dir)
 {
 	struct safe_buffer *buf;
+	unsigned long off;
 
 	dev_dbg(dev, "%s(dma=%#x,off=%#lx,sz=%zx,dir=%x)\n",
 		__func__, addr, off, sz, dir);
@@ -373,6 +373,8 @@ int dmabounce_sync_for_cpu(struct device *dev, dma_addr_t addr,
 	if (!buf)
 		return 1;
 
+	off = addr - buf->safe_dma_addr;
+
 	BUG_ON(buf->direction != dir);
 
 	dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n",
@@ -388,12 +390,21 @@ int dmabounce_sync_for_cpu(struct device *dev, dma_addr_t addr,
 	}
 	return 0;
 }
-EXPORT_SYMBOL(dmabounce_sync_for_cpu);
 
-int dmabounce_sync_for_device(struct device *dev, dma_addr_t addr,
-		unsigned long off, size_t sz, enum dma_data_direction dir)
+static void dmabounce_sync_for_cpu(struct device *dev,
+		dma_addr_t handle, size_t size, enum dma_data_direction dir)
+{
+	if (!__dmabounce_sync_for_cpu(dev, handle, size, dir))
+		return;
+
+	arm_dma_ops.sync_single_for_cpu(dev, handle, size, dir);
+}
+
+static int __dmabounce_sync_for_device(struct device *dev, dma_addr_t addr,
+		size_t sz, enum dma_data_direction dir)
 {
 	struct safe_buffer *buf;
+	unsigned long off;
 
 	dev_dbg(dev, "%s(dma=%#x,off=%#lx,sz=%zx,dir=%x)\n",
 		__func__, addr, off, sz, dir);
@@ -402,6 +413,8 @@ int dmabounce_sync_for_device(struct device *dev, dma_addr_t addr,
 	if (!buf)
 		return 1;
 
+	off = addr - buf->safe_dma_addr;
+
 	BUG_ON(buf->direction != dir);
 
 	dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n",
@@ -417,7 +430,38 @@ int dmabounce_sync_for_device(struct device *dev, dma_addr_t addr,
 	}
 	return 0;
 }
-EXPORT_SYMBOL(dmabounce_sync_for_device);
+
+static void dmabounce_sync_for_device(struct device *dev,
+		dma_addr_t handle, size_t size, enum dma_data_direction dir)
+{
+	if (!__dmabounce_sync_for_device(dev, handle, size, dir))
+		return;
+
+	arm_dma_ops.sync_single_for_device(dev, handle, size, dir);
+}
+
+static int dmabounce_set_mask(struct device *dev, u64 dma_mask)
+{
+	if (dev->archdata.dmabounce)
+		return 0;
+
+	return arm_dma_ops.set_dma_mask(dev, dma_mask);
+}
+
+static struct dma_map_ops dmabounce_ops = {
+	.alloc			= arm_dma_alloc,
+	.free			= arm_dma_free,
+	.mmap			= arm_dma_mmap,
+	.map_page		= dmabounce_map_page,
+	.unmap_page		= dmabounce_unmap_page,
+	.sync_single_for_cpu	= dmabounce_sync_for_cpu,
+	.sync_single_for_device	= dmabounce_sync_for_device,
+	.map_sg			= arm_dma_map_sg,
+	.unmap_sg		= arm_dma_unmap_sg,
+	.sync_sg_for_cpu	= arm_dma_sync_sg_for_cpu,
+	.sync_sg_for_device	= arm_dma_sync_sg_for_device,
+	.set_dma_mask		= dmabounce_set_mask,
+};
 
 static int dmabounce_init_pool(struct dmabounce_pool *pool, struct device *dev,
 		const char *name, unsigned long size)
@@ -479,6 +523,7 @@ int dmabounce_register_dev(struct device *dev, unsigned long small_buffer_size,
 #endif
 
 	dev->archdata.dmabounce = device_info;
+	set_dma_ops(dev, &dmabounce_ops);
 
 	dev_info(dev, "dmabounce: registered device\n");
 
@@ -497,6 +542,7 @@ void dmabounce_unregister_dev(struct device *dev)
 	struct dmabounce_device_info *device_info = dev->archdata.dmabounce;
 
 	dev->archdata.dmabounce = NULL;
+	set_dma_ops(dev, NULL);
 
 	if (!device_info) {
 		dev_warn(dev,
diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c
index dcb13494ca0d..c4110d1b1f2d 100644
--- a/arch/arm/common/it8152.c
+++ b/arch/arm/common/it8152.c
@@ -222,7 +222,7 @@ static int it8152_pci_write_config(struct pci_bus *bus,
 	return PCIBIOS_SUCCESSFUL;
 }
 
-static struct pci_ops it8152_ops = {
+struct pci_ops it8152_ops = {
 	.read = it8152_pci_read_config,
 	.write = it8152_pci_write_config,
 };
@@ -346,9 +346,4 @@ void pcibios_set_master(struct pci_dev *dev)
 }
 
 
-struct pci_bus * __init it8152_pci_scan_bus(int nr, struct pci_sys_data *sys)
-{
-	return pci_scan_root_bus(NULL, nr, &it8152_ops, sys, &sys->resources);
-}
-
 EXPORT_SYMBOL(dma_set_coherent_mask);
diff --git a/arch/arm/common/uengine.c b/arch/arm/common/uengine.c
deleted file mode 100644
index bef408f3d76c..000000000000
--- a/arch/arm/common/uengine.c
+++ /dev/null
@@ -1,507 +0,0 @@
-/*
- * Generic library functions for the microengines found on the Intel
- * IXP2000 series of network processors.
- *
- * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
- * Dedicated to Marija Kulikova.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as
- * published by the Free Software Foundation; either version 2.1 of the
- * License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <asm/hardware/uengine.h>
-
-#if defined(CONFIG_ARCH_IXP2000)
-#define IXP_UENGINE_CSR_VIRT_BASE	IXP2000_UENGINE_CSR_VIRT_BASE
-#define IXP_PRODUCT_ID			IXP2000_PRODUCT_ID
-#define IXP_MISC_CONTROL		IXP2000_MISC_CONTROL
-#define IXP_RESET1			IXP2000_RESET1
-#else
-#if defined(CONFIG_ARCH_IXP23XX)
-#define IXP_UENGINE_CSR_VIRT_BASE	IXP23XX_UENGINE_CSR_VIRT_BASE
-#define IXP_PRODUCT_ID			IXP23XX_PRODUCT_ID
-#define IXP_MISC_CONTROL		IXP23XX_MISC_CONTROL
-#define IXP_RESET1			IXP23XX_RESET1
-#else
-#error unknown platform
-#endif
-#endif
-
-#define USTORE_ADDRESS			0x000
-#define USTORE_DATA_LOWER		0x004
-#define USTORE_DATA_UPPER		0x008
-#define CTX_ENABLES			0x018
-#define CC_ENABLE			0x01c
-#define CSR_CTX_POINTER			0x020
-#define INDIRECT_CTX_STS		0x040
-#define ACTIVE_CTX_STS			0x044
-#define INDIRECT_CTX_SIG_EVENTS		0x048
-#define INDIRECT_CTX_WAKEUP_EVENTS	0x050
-#define NN_PUT				0x080
-#define NN_GET				0x084
-#define TIMESTAMP_LOW			0x0c0
-#define TIMESTAMP_HIGH			0x0c4
-#define T_INDEX_BYTE_INDEX		0x0f4
-#define LOCAL_CSR_STATUS		0x180
-
-u32 ixp2000_uengine_mask;
-
-static void *ixp2000_uengine_csr_area(int uengine)
-{
-	return ((void *)IXP_UENGINE_CSR_VIRT_BASE) + (uengine << 10);
-}
-
-/*
- * LOCAL_CSR_STATUS=1 after a read or write to a microengine's CSR
- * space means that the microengine we tried to access was also trying
- * to access its own CSR space on the same clock cycle as we did.  When
- * this happens, we lose the arbitration process by default, and the
- * read or write we tried to do was not actually performed, so we try
- * again until it succeeds.
- */
-u32 ixp2000_uengine_csr_read(int uengine, int offset)
-{
-	void *uebase;
-	u32 *local_csr_status;
-	u32 *reg;
-	u32 value;
-
-	uebase = ixp2000_uengine_csr_area(uengine);
-
-	local_csr_status = (u32 *)(uebase + LOCAL_CSR_STATUS);
-	reg = (u32 *)(uebase + offset);
-	do {
-		value = ixp2000_reg_read(reg);
-	} while (ixp2000_reg_read(local_csr_status) & 1);
-
-	return value;
-}
-EXPORT_SYMBOL(ixp2000_uengine_csr_read);
-
-void ixp2000_uengine_csr_write(int uengine, int offset, u32 value)
-{
-	void *uebase;
-	u32 *local_csr_status;
-	u32 *reg;
-
-	uebase = ixp2000_uengine_csr_area(uengine);
-
-	local_csr_status = (u32 *)(uebase + LOCAL_CSR_STATUS);
-	reg = (u32 *)(uebase + offset);
-	do {
-		ixp2000_reg_write(reg, value);
-	} while (ixp2000_reg_read(local_csr_status) & 1);
-}
-EXPORT_SYMBOL(ixp2000_uengine_csr_write);
-
-void ixp2000_uengine_reset(u32 uengine_mask)
-{
-	u32 value;
-
-	value = ixp2000_reg_read(IXP_RESET1) & ~ixp2000_uengine_mask;
-
-	uengine_mask &= ixp2000_uengine_mask;
-	ixp2000_reg_wrb(IXP_RESET1, value | uengine_mask);
-	ixp2000_reg_wrb(IXP_RESET1, value);
-}
-EXPORT_SYMBOL(ixp2000_uengine_reset);
-
-void ixp2000_uengine_set_mode(int uengine, u32 mode)
-{
-	/*
-	 * CTL_STR_PAR_EN: unconditionally enable parity checking on
-	 * control store.
-	 */
-	mode |= 0x10000000;
-	ixp2000_uengine_csr_write(uengine, CTX_ENABLES, mode);
-
-	/*
-	 * Enable updating of condition codes.
-	 */
-	ixp2000_uengine_csr_write(uengine, CC_ENABLE, 0x00002000);
-
-	/*
-	 * Initialise other per-microengine registers.
-	 */
-	ixp2000_uengine_csr_write(uengine, NN_PUT, 0x00);
-	ixp2000_uengine_csr_write(uengine, NN_GET, 0x00);
-	ixp2000_uengine_csr_write(uengine, T_INDEX_BYTE_INDEX, 0);
-}
-EXPORT_SYMBOL(ixp2000_uengine_set_mode);
-
-static int make_even_parity(u32 x)
-{
-	return hweight32(x) & 1;
-}
-
-static void ustore_write(int uengine, u64 insn)
-{
-	/*
-	 * Generate even parity for top and bottom 20 bits.
-	 */
-	insn |= (u64)make_even_parity((insn >> 20) & 0x000fffff) << 41;
-	insn |= (u64)make_even_parity(insn & 0x000fffff) << 40;
-
-	/*
-	 * Write to microstore.  The second write auto-increments
-	 * the USTORE_ADDRESS index register.
-	 */
-	ixp2000_uengine_csr_write(uengine, USTORE_DATA_LOWER, (u32)insn);
-	ixp2000_uengine_csr_write(uengine, USTORE_DATA_UPPER, (u32)(insn >> 32));
-}
-
-void ixp2000_uengine_load_microcode(int uengine, u8 *ucode, int insns)
-{
-	int i;
-
-	/*
-	 * Start writing to microstore at address 0.
-	 */
-	ixp2000_uengine_csr_write(uengine, USTORE_ADDRESS, 0x80000000);
-	for (i = 0; i < insns; i++) {
-		u64 insn;
-
-		insn = (((u64)ucode[0]) << 32) |
-			(((u64)ucode[1]) << 24) |
-			(((u64)ucode[2]) << 16) |
-			(((u64)ucode[3]) << 8) |
-			((u64)ucode[4]);
-		ucode += 5;
-
-		ustore_write(uengine, insn);
-	}
-
-	/*
- 	 * Pad with a few NOPs at the end (to avoid the microengine
-	 * aborting as it prefetches beyond the last instruction), unless
-	 * we run off the end of the instruction store first, at which
-	 * point the address register will wrap back to zero.
-	 */
-	for (i = 0; i < 4; i++) {
-		u32 addr;
-
-		addr = ixp2000_uengine_csr_read(uengine, USTORE_ADDRESS);
-		if (addr == 0x80000000)
-			break;
-		ustore_write(uengine, 0xf0000c0300ULL);
-	}
-
-	/*
-	 * End programming.
-	 */
-	ixp2000_uengine_csr_write(uengine, USTORE_ADDRESS, 0x00000000);
-}
-EXPORT_SYMBOL(ixp2000_uengine_load_microcode);
-
-void ixp2000_uengine_init_context(int uengine, int context, int pc)
-{
-	/*
-	 * Select the right context for indirect access.
-	 */
-	ixp2000_uengine_csr_write(uengine, CSR_CTX_POINTER, context);
-
-	/*
-	 * Initialise signal masks to immediately go to Ready state.
-	 */
-	ixp2000_uengine_csr_write(uengine, INDIRECT_CTX_SIG_EVENTS, 1);
-	ixp2000_uengine_csr_write(uengine, INDIRECT_CTX_WAKEUP_EVENTS, 1);
-
-	/*
-	 * Set program counter.
-	 */
-	ixp2000_uengine_csr_write(uengine, INDIRECT_CTX_STS, pc);
-}
-EXPORT_SYMBOL(ixp2000_uengine_init_context);
-
-void ixp2000_uengine_start_contexts(int uengine, u8 ctx_mask)
-{
-	u32 mask;
-
-	/*
-	 * Enable the specified context to go to Executing state.
-	 */
-	mask = ixp2000_uengine_csr_read(uengine, CTX_ENABLES);
-	mask |= ctx_mask << 8;
-	ixp2000_uengine_csr_write(uengine, CTX_ENABLES, mask);
-}
-EXPORT_SYMBOL(ixp2000_uengine_start_contexts);
-
-void ixp2000_uengine_stop_contexts(int uengine, u8 ctx_mask)
-{
-	u32 mask;
-
-	/*
-	 * Disable the Ready->Executing transition.  Note that this
-	 * does not stop the context until it voluntarily yields.
-	 */
-	mask = ixp2000_uengine_csr_read(uengine, CTX_ENABLES);
-	mask &= ~(ctx_mask << 8);
-	ixp2000_uengine_csr_write(uengine, CTX_ENABLES, mask);
-}
-EXPORT_SYMBOL(ixp2000_uengine_stop_contexts);
-
-static int check_ixp_type(struct ixp2000_uengine_code *c)
-{
-	u32 product_id;
-	u32 rev;
-
-	product_id = ixp2000_reg_read(IXP_PRODUCT_ID);
-	if (((product_id >> 16) & 0x1f) != 0)
-		return 0;
-
-	switch ((product_id >> 8) & 0xff) {
-#ifdef CONFIG_ARCH_IXP2000
-	case 0:		/* IXP2800 */
-		if (!(c->cpu_model_bitmask & 4))
-			return 0;
-		break;
-
-	case 1:		/* IXP2850 */
-		if (!(c->cpu_model_bitmask & 8))
-			return 0;
-		break;
-
-	case 2:		/* IXP2400 */
-		if (!(c->cpu_model_bitmask & 2))
-			return 0;
-		break;
-#endif
-
-#ifdef CONFIG_ARCH_IXP23XX
-	case 4:		/* IXP23xx */
-		if (!(c->cpu_model_bitmask & 0x3f0))
-			return 0;
-		break;
-#endif
-
-	default:
-		return 0;
-	}
-
-	rev = product_id & 0xff;
-	if (rev < c->cpu_min_revision || rev > c->cpu_max_revision)
-		return 0;
-
-	return 1;
-}
-
-static void generate_ucode(u8 *ucode, u32 *gpr_a, u32 *gpr_b)
-{
-	int offset;
-	int i;
-
-	offset = 0;
-
-	for (i = 0; i < 128; i++) {
-		u8 b3;
-		u8 b2;
-		u8 b1;
-		u8 b0;
-
-		b3 = (gpr_a[i] >> 24) & 0xff;
-		b2 = (gpr_a[i] >> 16) & 0xff;
-		b1 = (gpr_a[i] >> 8) & 0xff;
-		b0 = gpr_a[i] & 0xff;
-
-		/* immed[@ai, (b1 << 8) | b0] */
-		/* 11110000 0000VVVV VVVV11VV VVVVVV00 1IIIIIII */
-		ucode[offset++] = 0xf0;
-		ucode[offset++] = (b1 >> 4);
-		ucode[offset++] = (b1 << 4) | 0x0c | (b0 >> 6);
-		ucode[offset++] = (b0 << 2);
-		ucode[offset++] = 0x80 | i;
-
-		/* immed_w1[@ai, (b3 << 8) | b2] */
-		/* 11110100 0100VVVV VVVV11VV VVVVVV00 1IIIIIII */
-		ucode[offset++] = 0xf4;
-		ucode[offset++] = 0x40 | (b3 >> 4);
-		ucode[offset++] = (b3 << 4) | 0x0c | (b2 >> 6);
-		ucode[offset++] = (b2 << 2);
-		ucode[offset++] = 0x80 | i;
-	}
-
-	for (i = 0; i < 128; i++) {
-		u8 b3;
-		u8 b2;
-		u8 b1;
-		u8 b0;
-
-		b3 = (gpr_b[i] >> 24) & 0xff;
-		b2 = (gpr_b[i] >> 16) & 0xff;
-		b1 = (gpr_b[i] >> 8) & 0xff;
-		b0 = gpr_b[i] & 0xff;
-
-		/* immed[@bi, (b1 << 8) | b0] */
-		/* 11110000 0000VVVV VVVV001I IIIIII11 VVVVVVVV */
-		ucode[offset++] = 0xf0;
-		ucode[offset++] = (b1 >> 4);
-		ucode[offset++] = (b1 << 4) | 0x02 | (i >> 6);
-		ucode[offset++] = (i << 2) | 0x03;
-		ucode[offset++] = b0;
-
-		/* immed_w1[@bi, (b3 << 8) | b2] */
-		/* 11110100 0100VVVV VVVV001I IIIIII11 VVVVVVVV */
-		ucode[offset++] = 0xf4;
-		ucode[offset++] = 0x40 | (b3 >> 4);
-		ucode[offset++] = (b3 << 4) | 0x02 | (i >> 6);
-		ucode[offset++] = (i << 2) | 0x03;
-		ucode[offset++] = b2;
-	}
-
-	/* ctx_arb[kill] */
-	ucode[offset++] = 0xe0;
-	ucode[offset++] = 0x00;
-	ucode[offset++] = 0x01;
-	ucode[offset++] = 0x00;
-	ucode[offset++] = 0x00;
-}
-
-static int set_initial_registers(int uengine, struct ixp2000_uengine_code *c)
-{
-	int per_ctx_regs;
-	u32 *gpr_a;
-	u32 *gpr_b;
-	u8 *ucode;
-	int i;
-
-	gpr_a = kzalloc(128 * sizeof(u32), GFP_KERNEL);
-	gpr_b = kzalloc(128 * sizeof(u32), GFP_KERNEL);
-	ucode = kmalloc(513 * 5, GFP_KERNEL);
-	if (gpr_a == NULL || gpr_b == NULL || ucode == NULL) {
-		kfree(ucode);
-		kfree(gpr_b);
-		kfree(gpr_a);
-		return 1;
-	}
-
-	per_ctx_regs = 16;
-	if (c->uengine_parameters & IXP2000_UENGINE_4_CONTEXTS)
-		per_ctx_regs = 32;
-
-	for (i = 0; i < 256; i++) {
-		struct ixp2000_reg_value *r = c->initial_reg_values + i;
-		u32 *bank;
-		int inc;
-		int j;
-
-		if (r->reg == -1)
-			break;
-
-		bank = (r->reg & 0x400) ? gpr_b : gpr_a;
-		inc = (r->reg & 0x80) ? 128 : per_ctx_regs;
-
-		j = r->reg & 0x7f;
-		while (j < 128) {
-			bank[j] = r->value;
-			j += inc;
-		}
-	}
-
-	generate_ucode(ucode, gpr_a, gpr_b);
-	ixp2000_uengine_load_microcode(uengine, ucode, 513);
-	ixp2000_uengine_init_context(uengine, 0, 0);
-	ixp2000_uengine_start_contexts(uengine, 0x01);
-	for (i = 0; i < 100; i++) {
-		u32 status;
-
-		status = ixp2000_uengine_csr_read(uengine, ACTIVE_CTX_STS);
-		if (!(status & 0x80000000))
-			break;
-	}
-	ixp2000_uengine_stop_contexts(uengine, 0x01);
-
-	kfree(ucode);
-	kfree(gpr_b);
-	kfree(gpr_a);
-
-	return !!(i == 100);
-}
-
-int ixp2000_uengine_load(int uengine, struct ixp2000_uengine_code *c)
-{
-	int ctx;
-
-	if (!check_ixp_type(c))
-		return 1;
-
-	if (!(ixp2000_uengine_mask & (1 << uengine)))
-		return 1;
-
-	ixp2000_uengine_reset(1 << uengine);
-	ixp2000_uengine_set_mode(uengine, c->uengine_parameters);
-	if (set_initial_registers(uengine, c))
-		return 1;
-	ixp2000_uengine_load_microcode(uengine, c->insns, c->num_insns);
-
-	for (ctx = 0; ctx < 8; ctx++)
-		ixp2000_uengine_init_context(uengine, ctx, 0);
-
-	return 0;
-}
-EXPORT_SYMBOL(ixp2000_uengine_load);
-
-
-static int __init ixp2000_uengine_init(void)
-{
-	int uengine;
-	u32 value;
-
-	/*
-	 * Determine number of microengines present.
-	 */
-	switch ((ixp2000_reg_read(IXP_PRODUCT_ID) >> 8) & 0x1fff) {
-#ifdef CONFIG_ARCH_IXP2000
-	case 0:		/* IXP2800 */
-	case 1:		/* IXP2850 */
-		ixp2000_uengine_mask = 0x00ff00ff;
-		break;
-
-	case 2:		/* IXP2400 */
-		ixp2000_uengine_mask = 0x000f000f;
-		break;
-#endif
-
-#ifdef CONFIG_ARCH_IXP23XX
-	case 4:		/* IXP23xx */
-		ixp2000_uengine_mask = (*IXP23XX_EXP_CFG_FUSE >> 8) & 0xf;
-		break;
-#endif
-
-	default:
-		printk(KERN_INFO "Detected unknown IXP2000 model (%.8x)\n",
-			(unsigned int)ixp2000_reg_read(IXP_PRODUCT_ID));
-		ixp2000_uengine_mask = 0x00000000;
-		break;
-	}
-
-	/*
-	 * Reset microengines.
-	 */
-	ixp2000_uengine_reset(ixp2000_uengine_mask);
-
-	/*
-	 * Synchronise timestamp counters across all microengines.
-	 */
-	value = ixp2000_reg_read(IXP_MISC_CONTROL);
-	ixp2000_reg_wrb(IXP_MISC_CONTROL, value & ~0x80);
-	for (uengine = 0; uengine < 32; uengine++) {
-		if (ixp2000_uengine_mask & (1 << uengine)) {
-			ixp2000_uengine_csr_write(uengine, TIMESTAMP_LOW, 0);
-			ixp2000_uengine_csr_write(uengine, TIMESTAMP_HIGH, 0);
-		}
-	}
-	ixp2000_reg_wrb(IXP_MISC_CONTROL, value | 0x80);
-
-	return 0;
-}
-
-subsys_initcall(ixp2000_uengine_init);
diff --git a/arch/arm/common/via82c505.c b/arch/arm/common/via82c505.c
index 1171a5010aea..6cb362e56d29 100644
--- a/arch/arm/common/via82c505.c
+++ b/arch/arm/common/via82c505.c
@@ -51,7 +51,7 @@ via82c505_write_config(struct pci_bus *bus, unsigned int devfn, int where,
 	return PCIBIOS_SUCCESSFUL;
 }
 
-static struct pci_ops via82c505_ops = {
+struct pci_ops via82c505_ops = {
 	.read	= via82c505_read_config,
 	.write	= via82c505_write_config,
 };
@@ -81,12 +81,3 @@ int __init via82c505_setup(int nr, struct pci_sys_data *sys)
 {
 	return (nr == 0);
 }
-
-struct pci_bus * __init via82c505_scan_bus(int nr, struct pci_sys_data *sysdata)
-{
-	if (nr == 0)
-		return pci_scan_root_bus(NULL, 0, &via82c505_ops, sysdata,
-					 &sysdata->resources);
-
-	return NULL;
-}
diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index 7a66311f3066..e0d538803cc3 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -39,6 +39,7 @@
  * struct vic_device - VIC PM device
  * @irq: The IRQ number for the base of the VIC.
  * @base: The register base for the VIC.
+ * @valid_sources: A bitmask of valid interrupts
  * @resume_sources: A bitmask of interrupts for resume.
  * @resume_irqs: The IRQs enabled for resume.
  * @int_select: Save for VIC_INT_SELECT.
@@ -50,6 +51,7 @@
 struct vic_device {
 	void __iomem	*base;
 	int		irq;
+	u32		valid_sources;
 	u32		resume_sources;
 	u32		resume_irqs;
 	u32		int_select;
@@ -164,10 +166,32 @@ static int __init vic_pm_init(void)
 late_initcall(vic_pm_init);
 #endif /* CONFIG_PM */
 
+static struct irq_chip vic_chip;
+
+static int vic_irqdomain_map(struct irq_domain *d, unsigned int irq,
+			     irq_hw_number_t hwirq)
+{
+	struct vic_device *v = d->host_data;
+
+	/* Skip invalid IRQs, only register handlers for the real ones */
+	if (!(v->valid_sources & (1 << hwirq)))
+		return -ENOTSUPP;
+	irq_set_chip_and_handler(irq, &vic_chip, handle_level_irq);
+	irq_set_chip_data(irq, v->base);
+	set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+	return 0;
+}
+
+static struct irq_domain_ops vic_irqdomain_ops = {
+	.map = vic_irqdomain_map,
+	.xlate = irq_domain_xlate_onetwocell,
+};
+
 /**
  * vic_register() - Register a VIC.
  * @base: The base address of the VIC.
  * @irq: The base IRQ for the VIC.
+ * @valid_sources: bitmask of valid interrupts
  * @resume_sources: bitmask of interrupts allowed for resume sources.
  * @node: The device tree node associated with the VIC.
  *
@@ -178,7 +202,8 @@ late_initcall(vic_pm_init);
  * This also configures the IRQ domain for the VIC.
  */
 static void __init vic_register(void __iomem *base, unsigned int irq,
-				u32 resume_sources, struct device_node *node)
+				u32 valid_sources, u32 resume_sources,
+				struct device_node *node)
 {
 	struct vic_device *v;
 
@@ -189,11 +214,12 @@ static void __init vic_register(void __iomem *base, unsigned int irq,
 
 	v = &vic_devices[vic_id];
 	v->base = base;
+	v->valid_sources = valid_sources;
 	v->resume_sources = resume_sources;
 	v->irq = irq;
 	vic_id++;
-	v->domain = irq_domain_add_legacy(node, 32, irq, 0,
-					  &irq_domain_simple_ops, v);
+	v->domain = irq_domain_add_legacy(node, fls(valid_sources), irq, 0,
+					  &vic_irqdomain_ops, v);
 }
 
 static void vic_ack_irq(struct irq_data *d)
@@ -287,23 +313,6 @@ static void __init vic_clear_interrupts(void __iomem *base)
 	}
 }
 
-static void __init vic_set_irq_sources(void __iomem *base,
-				unsigned int irq_start, u32 vic_sources)
-{
-	unsigned int i;
-
-	for (i = 0; i < 32; i++) {
-		if (vic_sources & (1 << i)) {
-			unsigned int irq = irq_start + i;
-
-			irq_set_chip_and_handler(irq, &vic_chip,
-						 handle_level_irq);
-			irq_set_chip_data(irq, base);
-			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-		}
-	}
-}
-
 /*
  * The PL190 cell from ARM has been modified by ST to handle 64 interrupts.
  * The original cell has 32 interrupts, while the modified one has 64,
@@ -338,8 +347,7 @@ static void __init vic_init_st(void __iomem *base, unsigned int irq_start,
 		writel(32, base + VIC_PL190_DEF_VECT_ADDR);
 	}
 
-	vic_set_irq_sources(base, irq_start, vic_sources);
-	vic_register(base, irq_start, 0, node);
+	vic_register(base, irq_start, vic_sources, 0, node);
 }
 
 void __init __vic_init(void __iomem *base, unsigned int irq_start,
@@ -379,9 +387,7 @@ void __init __vic_init(void __iomem *base, unsigned int irq_start,
 
 	vic_init2(base);
 
-	vic_set_irq_sources(base, irq_start, vic_sources);
-
-	vic_register(base, irq_start, resume_sources, node);
+	vic_register(base, irq_start, vic_sources, resume_sources, node);
 }
 
 /**
@@ -427,19 +433,18 @@ int __init vic_of_init(struct device_node *node, struct device_node *parent)
 
 /*
  * Handle each interrupt in a single VIC.  Returns non-zero if we've
- * handled at least one interrupt.  This does a single read of the
- * status register and handles all interrupts in order from LSB first.
+ * handled at least one interrupt.  This reads the status register
+ * before handling each interrupt, which is necessary given that
+ * handle_IRQ may briefly re-enable interrupts for soft IRQ handling.
  */
 static int handle_one_vic(struct vic_device *vic, struct pt_regs *regs)
 {
 	u32 stat, irq;
 	int handled = 0;
 
-	stat = readl_relaxed(vic->base + VIC_IRQ_STATUS);
-	while (stat) {
+	while ((stat = readl_relaxed(vic->base + VIC_IRQ_STATUS))) {
 		irq = ffs(stat) - 1;
 		handle_IRQ(irq_find_mapping(vic->domain, irq), regs);
-		stat &= ~(1 << irq);
 		handled = 1;
 	}
 
diff --git a/arch/arm/configs/armadillo800eva_defconfig b/arch/arm/configs/armadillo800eva_defconfig
new file mode 100644
index 000000000000..ddc9fe6a78ac
--- /dev/null
+++ b/arch/arm/configs/armadillo800eva_defconfig
@@ -0,0 +1,142 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_SHMOBILE=y
+CONFIG_ARCH_R8A7740=y
+CONFIG_MACH_ARMADILLO800EVA=y
+# CONFIG_SH_TIMER_TMU is not set
+# CONFIG_ARM_THUMB is not set
+CONFIG_CPU_BPREDICT_DISABLE=y
+# CONFIG_CACHE_L2X0 is not set
+CONFIG_ARM_ERRATA_430973=y
+CONFIG_ARM_ERRATA_458693=y
+CONFIG_ARM_ERRATA_460075=y
+CONFIG_ARM_ERRATA_720789=y
+CONFIG_ARM_ERRATA_743622=y
+CONFIG_ARM_ERRATA_751472=y
+CONFIG_ARM_ERRATA_754322=y
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_FORCE_MAX_ZONEORDER=13
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096"
+CONFIG_CMDLINE_FORCE=y
+CONFIG_KEXEC=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_SUSPEND is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_DM=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+CONFIG_SH_ETH=y
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ST1232=y
+# CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=8
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_SH_MOBILE=y
+# CONFIG_HWMON is not set
+CONFIG_FB=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_SH_MOBILE_LCDC=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_SOC_SH4_FSI=y
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB=y
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_RENESAS_USBHS=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_RENESAS_USBHS_UDC=y
+CONFIG_USB_ETH=m
+CONFIG_MMC=y
+CONFIG_MMC_SDHI=y
+CONFIG_MMC_SH_MMCIF=y
+CONFIG_UIO=y
+CONFIG_UIO_PDRV_GENIRQ=y
+# CONFIG_DNOTIFY is not set
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_V4_1=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_ARM_UNWIND is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_ANSI_CPRNG=y
+CONFIG_XZ_DEC=y
diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig
new file mode 100644
index 000000000000..67bc571ed0c3
--- /dev/null
+++ b/arch/arm/configs/at91_dt_defconfig
@@ -0,0 +1,196 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_EMBEDDED=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_AT91=y
+CONFIG_SOC_AT91SAM9260=y
+CONFIG_SOC_AT91SAM9263=y
+CONFIG_SOC_AT91SAM9G45=y
+CONFIG_SOC_AT91SAM9X5=y
+CONFIG_MACH_AT91SAM_DT=y
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+CONFIG_AT91_TIMER_HZ=128
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_LEDS=y
+CONFIG_LEDS_CPU=y
+CONFIG_UACCESS_WITH_MEMCPY=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_CMDLINE="mem=128M console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw"
+CONFIG_KEXEC=y
+CONFIG_AUTO_ZRELADDR=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
+CONFIG_IPV6=y
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+CONFIG_IPV6_SIT_6RD=y
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_GLUEBI=y
+CONFIG_PROC_DEVICETREE=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_ATMEL_PWM=y
+CONFIG_ATMEL_TCLIB=y
+CONFIG_EEPROM_93CX6=m
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_NETDEVICES=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+CONFIG_DAVICOM_PHY=y
+CONFIG_MICREL_PHY=y
+# CONFIG_WLAN is not set
+CONFIG_INPUT_POLLDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=480
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=272
+CONFIG_INPUT_JOYDEV=y
+CONFIG_INPUT_EVDEV=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_SERIO is not set
+CONFIG_LEGACY_PTY_COUNT=4
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_GPIO=y
+CONFIG_SPI=y
+CONFIG_SPI_ATMEL=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_AT91SAM9X_WATCHDOG=y
+CONFIG_SSB=m
+CONFIG_FB=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_ATMEL=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_ATMEL_LCDC=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_ACORN_8x8=y
+CONFIG_FONT_MINI_4x6=y
+CONFIG_LOGO=y
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_ACM=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_FTDI_SIO=y
+CONFIG_USB_SERIAL_PL2303=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_AT91=m
+CONFIG_USB_ATMEL_USBA=m
+CONFIG_USB_ETH=m
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_CDC_COMPOSITE=m
+CONFIG_USB_G_ACM_MS=m
+CONFIG_USB_G_MULTI=m
+CONFIG_USB_G_MULTI_CDC=y
+CONFIG_MMC=y
+CONFIG_MMC_ATMELMCI=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_AT91RM9200=y
+CONFIG_RTC_DRV_AT91SAM9=y
+CONFIG_DMADEVICES=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_FANOTIFY=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_DEBUG_FS=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_FTRACE is not set
+CONFIG_DEBUG_USER=y
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+# CONFIG_CRYPTO_HW is not set
+CONFIG_CRC_CCITT=m
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC7=m
+CONFIG_AVERAGE=y
diff --git a/arch/arm/configs/at91rm9200_defconfig b/arch/arm/configs/at91rm9200_defconfig
index bbe4e1a1f5d8..d54e2acd3ab1 100644
--- a/arch/arm/configs/at91rm9200_defconfig
+++ b/arch/arm/configs/at91rm9200_defconfig
@@ -14,6 +14,7 @@ CONFIG_MODULE_SRCVERSION_ALL=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_AT91=y
+CONFIG_ARCH_AT91RM9200=y
 CONFIG_MACH_ONEARM=y
 CONFIG_ARCH_AT91RM9200DK=y
 CONFIG_MACH_AT91RM9200EK=y
diff --git a/arch/arm/configs/bcmring_defconfig b/arch/arm/configs/bcmring_defconfig
index 795374d48f81..9e6a8fe13164 100644
--- a/arch/arm/configs/bcmring_defconfig
+++ b/arch/arm/configs/bcmring_defconfig
@@ -11,7 +11,7 @@ CONFIG_KALLSYMS_EXTRA_PASS=y
 # CONFIG_TIMERFD is not set
 # CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
-CONFIG_PERF_COUNTERS=y
+CONFIG_PERF_EVENTS=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_SLUB_DEBUG is not set
 # CONFIG_COMPAT_BRK is not set
diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig
index b5ac644e12af..e05a2f1665a7 100644
--- a/arch/arm/configs/imx_v4_v5_defconfig
+++ b/arch/arm/configs/imx_v4_v5_defconfig
@@ -33,6 +33,7 @@ CONFIG_MACH_IMX27LITE=y
 CONFIG_MACH_PCA100=y
 CONFIG_MACH_MXT_TD60=y
 CONFIG_MACH_IMX27IPCAM=y
+CONFIG_MACH_IMX27_DT=y
 CONFIG_MXC_IRQ_PRIOR=y
 CONFIG_MXC_PWM=y
 CONFIG_NO_HZ=y
@@ -92,6 +93,7 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=m
+CONFIG_TOUCHSCREEN_MC13783=m
 # CONFIG_SERIO is not set
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_8250=m
@@ -107,11 +109,13 @@ CONFIG_SPI_SPIDEV=y
 CONFIG_W1=y
 CONFIG_W1_MASTER_MXC=y
 CONFIG_W1_SLAVE_THERM=y
-# CONFIG_HWMON is not set
+CONFIG_HWMON=m
+CONFIG_SENSORS_MC13783_ADC=m
 CONFIG_WATCHDOG=y
 CONFIG_IMX2_WDT=y
 CONFIG_MFD_MC13XXX=y
 CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_MC13783=y
 CONFIG_REGULATOR_MC13892=y
 CONFIG_FB=y
@@ -169,7 +173,7 @@ CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_PCF8563=y
 CONFIG_RTC_DRV_IMXDI=y
-CONFIG_RTC_MXC=y
+CONFIG_RTC_DRV_MXC=y
 CONFIG_DMADEVICES=y
 CONFIG_IMX_SDMA=y
 CONFIG_IMX_DMA=y
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index dc6f6411bbf5..b1d3675df72c 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -64,6 +64,12 @@ CONFIG_IPV6=y
 # CONFIG_WIRELESS is not set
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_MTD=y
+CONFIG_MTD_OF_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_DATAFLASH=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_SST25L=y
 # CONFIG_STANDALONE is not set
 CONFIG_CONNECTOR=y
 CONFIG_BLK_DEV_LOOP=y
@@ -172,7 +178,7 @@ CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-CONFIG_RTC_MXC=y
+CONFIG_RTC_DRV_MXC=y
 CONFIG_DMADEVICES=y
 CONFIG_IMX_SDMA=y
 CONFIG_EXT2_FS=y
diff --git a/arch/arm/configs/ixp2000_defconfig b/arch/arm/configs/ixp2000_defconfig
deleted file mode 100644
index 8405aded97a3..000000000000
--- a/arch/arm/configs/ixp2000_defconfig
+++ /dev/null
@@ -1,99 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-# CONFIG_HOTPLUG is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_ARCH_IXP2000=y
-CONFIG_ARCH_ENP2611=y
-CONFIG_ARCH_IXDP2400=y
-CONFIG_ARCH_IXDP2800=y
-CONFIG_ARCH_IXDP2401=y
-CONFIG_ARCH_IXDP2801=y
-# CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set
-# CONFIG_ARM_THUMB is not set
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0"
-CONFIG_FPE_NWFPE=y
-CONFIG_FPE_NWFPE_XP=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_SYN_COOKIES=y
-CONFIG_IPV6=y
-# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_IPV6_SIT is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_IXP2000=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NBD=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_EEPROM_LEGACY=y
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_CS89x0=y
-CONFIG_E100=y
-CONFIG_ENP2611_MSF_NET=y
-CONFIG_WAN=y
-CONFIG_HDLC=y
-CONFIG_HDLC_RAW=y
-CONFIG_HDLC_CISCO=y
-CONFIG_HDLC_FR=y
-CONFIG_HDLC_PPP=y
-CONFIG_DLCI=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=3
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_IXP2000=y
-CONFIG_WATCHDOG=y
-CONFIG_IXP2000_WATCHDOG=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/ixp23xx_defconfig b/arch/arm/configs/ixp23xx_defconfig
deleted file mode 100644
index 688717612e91..000000000000
--- a/arch/arm/configs/ixp23xx_defconfig
+++ /dev/null
@@ -1,105 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_ARCH_IXP23XX=y
-CONFIG_MACH_ESPRESSO=y
-CONFIG_MACH_IXDP2351=y
-CONFIG_MACH_ROADRUNNER=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp"
-CONFIG_FPE_NWFPE=y
-CONFIG_FPE_NWFPE_XP=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_SYN_COOKIES=y
-CONFIG_IPV6=y
-# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_IPV6_SIT is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NBD=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_EEPROM_LEGACY=y
-CONFIG_IDE=y
-CONFIG_BLK_DEV_SIIMAGE=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_E100=y
-CONFIG_E1000=y
-CONFIG_WAN=y
-CONFIG_HDLC=y
-CONFIG_HDLC_RAW=y
-CONFIG_HDLC_CISCO=y
-CONFIG_HDLC_FR=y
-CONFIG_HDLC_PPP=y
-CONFIG_DLCI=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_WATCHDOG=y
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_UHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_INOTIFY=y
-CONFIG_MSDOS_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/kzm9g_defconfig b/arch/arm/configs/kzm9g_defconfig
new file mode 100644
index 000000000000..e3ebc20ed0a7
--- /dev/null
+++ b/arch/arm/configs/kzm9g_defconfig
@@ -0,0 +1,139 @@
+# CONFIG_ARM_PATCH_PHYS_VIRT is not set
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_EMBEDDED=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_SHMOBILE=y
+CONFIG_KEYBOARD_GPIO_POLLED=y
+CONFIG_ARCH_SH73A0=y
+CONFIG_MACH_KZM9G=y
+CONFIG_MEMORY_START=0x41000000
+CONFIG_MEMORY_SIZE=0x1f000000
+CONFIG_ARM_ERRATA_743622=y
+CONFIG_ARM_ERRATA_754322=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_SMP=y
+CONFIG_SCHED_MC=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_HIGHMEM=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel earlyprintk=sh-sci.4,115200"
+CONFIG_KEXEC=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_PM_RUNTIME=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+CONFIG_IRDA=y
+CONFIG_SH_IRDA=y
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_NETDEVICES=y
+CONFIG_SMSC911X=y
+# CONFIG_WLAN is not set
+CONFIG_INPUT_SPARSEKMAP=y
+# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ST1232=y
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=9
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_SH_MOBILE=y
+CONFIG_GPIO_PCF857X=y
+# CONFIG_HWMON is not set
+CONFIG_FB=y
+CONFIG_FB_SH_MOBILE_LCDC=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+CONFIG_FB_SH_MOBILE_MERAM=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_SOC_SH4_FSI=y
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB=y
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_R8A66597_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_MMC=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+CONFIG_MMC_SDHI=y
+CONFIG_MMC_SH_MMCIF=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_RTC_CLASS=y
+CONFIG_DMADEVICES=y
+CONFIG_SH_DMAE=y
+CONFIG_ASYNC_TX_DMA=y
+CONFIG_STAGING=y
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_V4_1=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_FTRACE is not set
+# CONFIG_ARM_UNWIND is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRC16=y
diff --git a/arch/arm/configs/lpc32xx_defconfig b/arch/arm/configs/lpc32xx_defconfig
index fb2088171ca9..4fa60547494a 100644
--- a/arch/arm/configs/lpc32xx_defconfig
+++ b/arch/arm/configs/lpc32xx_defconfig
@@ -2,7 +2,7 @@ CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
+CONFIG_LOG_BUF_SHIFT=16
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
@@ -10,6 +10,7 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_EMBEDDED=y
 CONFIG_SLAB=y
+CONFIG_JUMP_LABEL=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
@@ -21,6 +22,8 @@ CONFIG_PREEMPT=y
 CONFIG_AEABI=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_CMDLINE="console=ttyS0,115200n81 root=/dev/ram0"
 CONFIG_CPU_IDLE=y
 CONFIG_FPE_NWFPE=y
@@ -40,7 +43,8 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
+CONFIG_IPV6=y
+CONFIG_IPV6_PRIVACY=y
 # CONFIG_WIRELESS is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_FW_LOADER is not set
@@ -55,13 +59,24 @@ CONFIG_BLK_DEV_CRYPTOLOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=1
 CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_AT25=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_NETDEVICES=y
 CONFIG_MII=y
-CONFIG_PHYLIB=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+CONFIG_LPC_ENET=y
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
 CONFIG_SMSC_PHY=y
 # CONFIG_WLAN is not set
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
@@ -97,16 +112,22 @@ CONFIG_SND_SEQUENCER=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
 CONFIG_SND_SEQUENCER_OSS=y
-CONFIG_SND_DYNAMIC_MINORS=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
 # CONFIG_SND_VERBOSE_PROCFS is not set
+CONFIG_SND_DEBUG=y
+CONFIG_SND_DEBUG_VERBOSE=y
 # CONFIG_SND_DRIVERS is not set
 # CONFIG_SND_ARM is not set
 # CONFIG_SND_SPI is not set
 CONFIG_SND_SOC=y
 # CONFIG_HID_SUPPORT is not set
 CONFIG_USB=y
+CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_STORAGE=y
-CONFIG_USB_LIBUSUAL=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_LPC32XX=y
+CONFIG_USB_MASS_STORAGE=m
+CONFIG_USB_G_SERIAL=m
 CONFIG_MMC=y
 # CONFIG_MMC_BLOCK_BOUNCE is not set
 CONFIG_MMC_ARMMMCI=y
@@ -114,10 +135,21 @@ CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+CONFIG_RTC_DRV_DS1374=y
+CONFIG_RTC_DRV_PCF8563=y
 CONFIG_RTC_DRV_LPC32XX=y
+CONFIG_DMADEVICES=y
+CONFIG_AMBA_PL08X=y
+CONFIG_STAGING=y
+CONFIG_IIO=y
+CONFIG_LPC32XX_ADC=y
 CONFIG_EXT2_FS=y
 CONFIG_AUTOFS4_FS=y
 CONFIG_MSDOS_FS=y
diff --git a/arch/arm/configs/mini2440_defconfig b/arch/arm/configs/mini2440_defconfig
index 42da9183acc8..082175c54e7c 100644
--- a/arch/arm/configs/mini2440_defconfig
+++ b/arch/arm/configs/mini2440_defconfig
@@ -14,6 +14,8 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_BLK_DEV_INTEGRITY=y
 CONFIG_ARCH_S3C24XX=y
+# CONFIG_CPU_S3C2410 is not set
+CONFIG_CPU_S3C2440=y
 CONFIG_S3C_ADC=y
 CONFIG_S3C24XX_PWM=y
 CONFIG_MACH_MINI2440=y
diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig
index 1ebbf451c48d..5406c23a02e3 100644
--- a/arch/arm/configs/mxs_defconfig
+++ b/arch/arm/configs/mxs_defconfig
@@ -22,6 +22,7 @@ CONFIG_BLK_DEV_INTEGRITY=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_MXS=y
+CONFIG_MACH_MXS_DT=y
 CONFIG_MACH_MX23EVK=y
 CONFIG_MACH_MX28EVK=y
 CONFIG_MACH_STMP378X_DEVB=y
diff --git a/arch/arm/configs/nhk8815_defconfig b/arch/arm/configs/nhk8815_defconfig
index 37207d1bf44b..bf123c5384d4 100644
--- a/arch/arm/configs/nhk8815_defconfig
+++ b/arch/arm/configs/nhk8815_defconfig
@@ -97,6 +97,7 @@ CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_GPIO=y
 CONFIG_DEBUG_GPIO=y
+CONFIG_PINCTRL_NOMADIK=y
 # CONFIG_HWMON is not set
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_RTC_CLASS=y
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index d5f00d7eb075..9854ff4279e0 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -98,6 +98,7 @@ CONFIG_LIBERTAS_USB=m
 CONFIG_LIBERTAS_SDIO=m
 CONFIG_LIBERTAS_DEBUG=y
 CONFIG_USB_USBNET=y
+CONFIG_USB_NET_SMSC95XX=y
 CONFIG_USB_ALI_M5632=y
 CONFIG_USB_AN2720=y
 CONFIG_USB_EPSON2888=y
@@ -175,6 +176,7 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_DEVICEFS=y
 CONFIG_USB_SUSPEND=y
 CONFIG_USB_MON=y
+CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_WDM=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_LIBUSUAL=y
diff --git a/arch/arm/configs/prima2_defconfig b/arch/arm/configs/prima2_defconfig
new file mode 100644
index 000000000000..c328ac65479a
--- /dev/null
+++ b/arch/arm/configs/prima2_defconfig
@@ -0,0 +1,69 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_ARCH_PRIMA2=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_KEXEC=y
+CONFIG_BINFMT_MISC=y
+CONFIG_PM_RUNTIME=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_SERIAL_SIRFSOC=y
+CONFIG_SERIAL_SIRFSOC_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_SIRF=y
+CONFIG_SPI=y
+CONFIG_SPI_SIRF=y
+CONFIG_SPI_SPIDEV=y
+# CONFIG_HWMON is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_GADGET=y
+CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_DMADEVICES=y
+CONFIG_DMADEVICES_DEBUG=y
+CONFIG_DMADEVICES_VDEBUG=y
+CONFIG_SIRF_DMA=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_CRAMFS=y
+CONFIG_ROMFS_FS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_SECTION_MISMATCH=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_PREEMPT is not set
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_INFO=y
+CONFIG_CRC_CCITT=y
diff --git a/arch/arm/configs/rpc_defconfig b/arch/arm/configs/rpc_defconfig
index af278f7a2246..00515ef9782d 100644
--- a/arch/arm/configs/rpc_defconfig
+++ b/arch/arm/configs/rpc_defconfig
@@ -8,8 +8,6 @@ CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_ARCH_RPC=y
-CONFIG_CPU_ARM610=y
-CONFIG_CPU_ARM710=y
 CONFIG_CPU_SA110=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
diff --git a/arch/arm/configs/spear13xx_defconfig b/arch/arm/configs/spear13xx_defconfig
new file mode 100644
index 000000000000..1fdb82694ca2
--- /dev/null
+++ b/arch/arm/configs/spear13xx_defconfig
@@ -0,0 +1,95 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_PLAT_SPEAR=y
+CONFIG_ARCH_SPEAR13XX=y
+CONFIG_MACH_SPEAR1310=y
+CONFIG_MACH_SPEAR1340=y
+# CONFIG_SWP_EMULATE is not set
+CONFIG_SMP=y
+# CONFIG_SMP_ON_UP is not set
+# CONFIG_ARM_CPU_TOPOLOGY is not set
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_BINFMT_MISC=y
+CONFIG_NET=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_OF_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_FSMC=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_ATA=y
+# CONFIG_SATA_PMP is not set
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_PATA_ARASAN_CF=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+CONFIG_STMMAC_ETH=y
+# CONFIG_WLAN is not set
+CONFIG_INPUT_FF_MEMLESS=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_SPEAR=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_RAW_DRIVER=y
+CONFIG_MAX_RAW_DEVS=8192
+CONFIG_I2C=y
+CONFIG_I2C_DESIGNWARE_PLATFORM=y
+CONFIG_SPI=y
+CONFIG_SPI_PL022=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_PL061=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_MPCORE_WATCHDOG=y
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB=y
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SPEAR=y
+CONFIG_RTC_CLASS=y
+CONFIG_DMADEVICES=y
+CONFIG_DW_DMAC=y
+CONFIG_DMATEST=m
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_AUTOFS4_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=m
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_INFO=y
diff --git a/arch/arm/configs/spear3xx_defconfig b/arch/arm/configs/spear3xx_defconfig
index fea7e1f026a3..865980c5f212 100644
--- a/arch/arm/configs/spear3xx_defconfig
+++ b/arch/arm/configs/spear3xx_defconfig
@@ -2,33 +2,70 @@ CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODVERSIONS=y
+CONFIG_PARTITION_ADVANCED=y
 CONFIG_PLAT_SPEAR=y
-CONFIG_BOARD_SPEAR300_EVB=y
-CONFIG_BOARD_SPEAR310_EVB=y
-CONFIG_BOARD_SPEAR320_EVB=y
+CONFIG_MACH_SPEAR300=y
+CONFIG_MACH_SPEAR310=y
+CONFIG_MACH_SPEAR320=y
 CONFIG_BINFMT_MISC=y
+CONFIG_NET=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_OF_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_FSMC=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+CONFIG_STMMAC_ETH=y
+# CONFIG_WLAN is not set
 CONFIG_INPUT_FF_MEMLESS=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_SPEAR=y
 # CONFIG_INPUT_MOUSE is not set
+# CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_RAW_DRIVER=y
 CONFIG_MAX_RAW_DEVS=8192
+CONFIG_I2C=y
+CONFIG_I2C_DESIGNWARE_PLATFORM=y
+CONFIG_SPI=y
+CONFIG_SPI_PL022=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_PL061=y
 # CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_ARM_SP805_WATCHDOG=y
+CONFIG_FB=y
+CONFIG_FB_ARMCLCD=y
 # CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
+CONFIG_USB=y
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SPEAR=y
+CONFIG_RTC_CLASS=y
+CONFIG_DMADEVICES=y
+CONFIG_AMBA_PL08X=y
+CONFIG_DMATEST=m
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_SECURITY=y
@@ -39,8 +76,7 @@ CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
 CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
 CONFIG_TMPFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS=y
+CONFIG_JFFS2_FS=y
 CONFIG_NLS_DEFAULT="utf8"
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ASCII=m
@@ -48,6 +84,4 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_CRC32 is not set
diff --git a/arch/arm/configs/spear6xx_defconfig b/arch/arm/configs/spear6xx_defconfig
index cef2e836afd2..a2a1265f86b6 100644
--- a/arch/arm/configs/spear6xx_defconfig
+++ b/arch/arm/configs/spear6xx_defconfig
@@ -2,29 +2,60 @@ CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODVERSIONS=y
+CONFIG_PARTITION_ADVANCED=y
 CONFIG_PLAT_SPEAR=y
 CONFIG_ARCH_SPEAR6XX=y
-CONFIG_BOARD_SPEAR600_EVB=y
 CONFIG_BINFMT_MISC=y
+CONFIG_NET=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_OF_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_FSMC=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+CONFIG_STMMAC_ETH=y
+# CONFIG_WLAN is not set
 CONFIG_INPUT_FF_MEMLESS=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
 CONFIG_RAW_DRIVER=y
 CONFIG_MAX_RAW_DEVS=8192
+CONFIG_I2C=y
+CONFIG_I2C_DESIGNWARE_PLATFORM=y
+CONFIG_SPI=y
+CONFIG_SPI_PL022=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_PL061=y
 # CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_ARM_SP805_WATCHDOG=y
 # CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_RTC_CLASS=y
+CONFIG_DMADEVICES=y
+CONFIG_AMBA_PL08X=y
+CONFIG_DMATEST=m
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_SECURITY=y
@@ -35,8 +66,7 @@ CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
 CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
 CONFIG_TMPFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS=y
+CONFIG_JFFS2_FS=y
 CONFIG_NLS_DEFAULT="utf8"
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ASCII=m
@@ -44,6 +74,4 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_CRC32 is not set
diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig
index 351d6708c3ae..1198dd61c7c4 100644
--- a/arch/arm/configs/tegra_defconfig
+++ b/arch/arm/configs/tegra_defconfig
@@ -45,6 +45,7 @@ CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_IDLE=y
 CONFIG_VFP=y
+CONFIG_PM_RUNTIME=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -91,6 +92,8 @@ CONFIG_USB_NET_SMSC75XX=y
 CONFIG_USB_NET_SMSC95XX=y
 # CONFIG_WLAN is not set
 CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_MPU3050=y
 # CONFIG_VT is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_DEVKMEM is not set
@@ -103,12 +106,15 @@ CONFIG_I2C=y
 CONFIG_I2C_TEGRA=y
 CONFIG_SPI=y
 CONFIG_SPI_TEGRA=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_BATTERY_SBS=y
 CONFIG_SENSORS_LM90=y
 CONFIG_MFD_TPS6586X=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
 CONFIG_REGULATOR_GPIO=y
+CONFIG_REGULATOR_TPS62360=y
 CONFIG_REGULATOR_TPS6586X=y
 CONFIG_SOUND=y
 CONFIG_SND=y
@@ -133,16 +139,19 @@ CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SDHCI_TEGRA=y
 CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_EM3027=y
 CONFIG_RTC_DRV_TEGRA=y
 CONFIG_STAGING=y
-CONFIG_IIO=y
 CONFIG_SENSORS_ISL29018=y
+CONFIG_SENSORS_ISL29028=y
 CONFIG_SENSORS_AK8975=y
 CONFIG_MFD_NVEC=y
 CONFIG_KEYBOARD_NVEC=y
 CONFIG_SERIO_NVEC_PS2=y
 CONFIG_TEGRA_IOMMU_GART=y
 CONFIG_TEGRA_IOMMU_SMMU=y
+CONFIG_MEMORY=y
+CONFIG_IIO=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig
index 889d73ac1ae1..2d4f661d1cf6 100644
--- a/arch/arm/configs/u8500_defconfig
+++ b/arch/arm/configs/u8500_defconfig
@@ -8,8 +8,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_ARCH_U8500=y
-CONFIG_UX500_SOC_DB5500=y
-CONFIG_UX500_SOC_DB8500=y
 CONFIG_MACH_HREFV60=y
 CONFIG_MACH_SNOWBALL=y
 CONFIG_MACH_U5500=y
@@ -39,7 +37,6 @@ CONFIG_CAIF=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_MISC_DEVICES=y
 CONFIG_AB8500_PWM=y
 CONFIG_SENSORS_BH1780=y
 CONFIG_NETDEVICES=y
@@ -65,17 +62,20 @@ CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
 CONFIG_HW_RANDOM=y
 CONFIG_HW_RANDOM_NOMADIK=y
-CONFIG_I2C=y
-CONFIG_I2C_NOMADIK=y
 CONFIG_SPI=y
 CONFIG_SPI_PL022=y
 CONFIG_GPIO_STMPE=y
 CONFIG_GPIO_TC3589X=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_AB8500_BM=y
+CONFIG_AB8500_BATTERY_THERM_ON_BATCTRL=y
 CONFIG_MFD_STMPE=y
 CONFIG_MFD_TC3589X=y
 CONFIG_AB5500_CORE=y
 CONFIG_AB8500_CORE=y
+CONFIG_REGULATOR=y
 CONFIG_REGULATOR_AB8500=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
 # CONFIG_HID_SUPPORT is not set
 CONFIG_USB_GADGET=y
 CONFIG_AB8500_USB=y
diff --git a/arch/arm/include/asm/arch_timer.h b/arch/arm/include/asm/arch_timer.h
new file mode 100644
index 000000000000..ed2e95d46e29
--- /dev/null
+++ b/arch/arm/include/asm/arch_timer.h
@@ -0,0 +1,19 @@
+#ifndef __ASMARM_ARCH_TIMER_H
+#define __ASMARM_ARCH_TIMER_H
+
+#ifdef CONFIG_ARM_ARCH_TIMER
+int arch_timer_of_register(void);
+int arch_timer_sched_clock_init(void);
+#else
+static inline int arch_timer_of_register(void)
+{
+	return -ENXIO;
+}
+
+static inline int arch_timer_sched_clock_init(void)
+{
+	return -ENXIO;
+}
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/barrier.h b/arch/arm/include/asm/barrier.h
index 44f4a09ff37b..05112380dc53 100644
--- a/arch/arm/include/asm/barrier.h
+++ b/arch/arm/include/asm/barrier.h
@@ -2,6 +2,7 @@
 #define __ASM_BARRIER_H
 
 #ifndef __ASSEMBLY__
+#include <asm/outercache.h>
 
 #define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t");
 
@@ -39,7 +40,6 @@
 #ifdef CONFIG_ARCH_HAS_BARRIERS
 #include <mach/barriers.h>
 #elif defined(CONFIG_ARM_DMA_MEM_BUFFERABLE) || defined(CONFIG_SMP)
-#include <asm/outercache.h>
 #define mb()		do { dsb(); outer_sync(); } while (0)
 #define rmb()		dsb()
 #define wmb()		mb()
diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
index d5d8d5c72682..004c1bc95d2b 100644
--- a/arch/arm/include/asm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@@ -101,7 +101,7 @@ struct cpu_cache_fns {
 	void (*flush_user_range)(unsigned long, unsigned long, unsigned int);
 
 	void (*coherent_kern_range)(unsigned long, unsigned long);
-	void (*coherent_user_range)(unsigned long, unsigned long);
+	int  (*coherent_user_range)(unsigned long, unsigned long);
 	void (*flush_kern_dcache_area)(void *, size_t);
 
 	void (*dma_map_area)(const void *, size_t, int);
@@ -142,7 +142,7 @@ extern void __cpuc_flush_kern_all(void);
 extern void __cpuc_flush_user_all(void);
 extern void __cpuc_flush_user_range(unsigned long, unsigned long, unsigned int);
 extern void __cpuc_coherent_kern_range(unsigned long, unsigned long);
-extern void __cpuc_coherent_user_range(unsigned long, unsigned long);
+extern int  __cpuc_coherent_user_range(unsigned long, unsigned long);
 extern void __cpuc_flush_dcache_area(void *, size_t);
 
 /*
@@ -249,7 +249,7 @@ extern void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr
  * Harvard caches are synchronised for the user space address range.
  * This is used for the ARM private sys_cacheflush system call.
  */
-#define flush_cache_user_range(vma,start,end) \
+#define flush_cache_user_range(start,end) \
 	__cpuc_coherent_user_range((start) & PAGE_MASK, PAGE_ALIGN(end))
 
 /*
diff --git a/arch/arm/include/asm/cmpxchg.h b/arch/arm/include/asm/cmpxchg.h
index d41d7cbf0ada..7eb18c1d8d6c 100644
--- a/arch/arm/include/asm/cmpxchg.h
+++ b/arch/arm/include/asm/cmpxchg.h
@@ -229,66 +229,19 @@ static inline unsigned long __cmpxchg_local(volatile void *ptr,
 				       (unsigned long)(n),		\
 				       sizeof(*(ptr))))
 
-#ifndef CONFIG_CPU_V6	/* min ARCH >= ARMv6K */
-
-/*
- * Note : ARMv7-M (currently unsupported by Linux) does not support
- * ldrexd/strexd. If ARMv7-M is ever supported by the Linux kernel, it should
- * not be allowed to use __cmpxchg64.
- */
-static inline unsigned long long __cmpxchg64(volatile void *ptr,
-					     unsigned long long old,
-					     unsigned long long new)
-{
-	register unsigned long long oldval asm("r0");
-	register unsigned long long __old asm("r2") = old;
-	register unsigned long long __new asm("r4") = new;
-	unsigned long res;
-
-	do {
-		asm volatile(
-		"	@ __cmpxchg8\n"
-		"	ldrexd	%1, %H1, [%2]\n"
-		"	mov	%0, #0\n"
-		"	teq	%1, %3\n"
-		"	teqeq	%H1, %H3\n"
-		"	strexdeq %0, %4, %H4, [%2]\n"
-			: "=&r" (res), "=&r" (oldval)
-			: "r" (ptr), "Ir" (__old), "r" (__new)
-			: "memory", "cc");
-	} while (res);
-
-	return oldval;
-}
-
-static inline unsigned long long __cmpxchg64_mb(volatile void *ptr,
-						unsigned long long old,
-						unsigned long long new)
-{
-	unsigned long long ret;
-
-	smp_mb();
-	ret = __cmpxchg64(ptr, old, new);
-	smp_mb();
-
-	return ret;
-}
-
-#define cmpxchg64(ptr,o,n)						\
-	((__typeof__(*(ptr)))__cmpxchg64_mb((ptr),			\
-					    (unsigned long long)(o),	\
-					    (unsigned long long)(n)))
-
-#define cmpxchg64_local(ptr,o,n)					\
-	((__typeof__(*(ptr)))__cmpxchg64((ptr),				\
-					 (unsigned long long)(o),	\
-					 (unsigned long long)(n)))
-
-#else /* min ARCH = ARMv6 */
-
-#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
-
-#endif
+#define cmpxchg64(ptr, o, n)						\
+	((__typeof__(*(ptr)))atomic64_cmpxchg(container_of((ptr),	\
+						atomic64_t,		\
+						counter),		\
+					      (unsigned long)(o),	\
+					      (unsigned long)(n)))
+
+#define cmpxchg64_local(ptr, o, n)					\
+	((__typeof__(*(ptr)))local64_cmpxchg(container_of((ptr),	\
+						local64_t,		\
+						a),			\
+					     (unsigned long)(o),	\
+					     (unsigned long)(n)))
 
 #endif	/* __LINUX_ARM_ARCH__ >= 6 */
 
diff --git a/arch/arm/include/asm/cpu.h b/arch/arm/include/asm/cpu.h
index 793968173bef..d797223b39d5 100644
--- a/arch/arm/include/asm/cpu.h
+++ b/arch/arm/include/asm/cpu.h
@@ -16,7 +16,6 @@
 struct cpuinfo_arm {
 	struct cpu	cpu;
 #ifdef CONFIG_SMP
-	struct task_struct *idle;
 	unsigned int	loops_per_jiffy;
 #endif
 };
diff --git a/arch/arm/include/asm/device.h b/arch/arm/include/asm/device.h
index 7aa368003b05..b69c0d3285f8 100644
--- a/arch/arm/include/asm/device.h
+++ b/arch/arm/include/asm/device.h
@@ -7,12 +7,16 @@
 #define ASMARM_DEVICE_H
 
 struct dev_archdata {
+	struct dma_map_ops	*dma_ops;
 #ifdef CONFIG_DMABOUNCE
 	struct dmabounce_device_info *dmabounce;
 #endif
 #ifdef CONFIG_IOMMU_API
 	void *iommu; /* private IOMMU data */
 #endif
+#ifdef CONFIG_ARM_DMA_USE_IOMMU
+	struct dma_iommu_mapping	*mapping;
+#endif
 };
 
 struct omap_device;
diff --git a/arch/arm/include/asm/dma-contiguous.h b/arch/arm/include/asm/dma-contiguous.h
new file mode 100644
index 000000000000..3ed37b4d93da
--- /dev/null
+++ b/arch/arm/include/asm/dma-contiguous.h
@@ -0,0 +1,15 @@
+#ifndef ASMARM_DMA_CONTIGUOUS_H
+#define ASMARM_DMA_CONTIGUOUS_H
+
+#ifdef __KERNEL__
+#ifdef CONFIG_CMA
+
+#include <linux/types.h>
+#include <asm-generic/dma-contiguous.h>
+
+void dma_contiguous_early_fixup(phys_addr_t base, unsigned long size);
+
+#endif
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/dma-iommu.h b/arch/arm/include/asm/dma-iommu.h
new file mode 100644
index 000000000000..799b09409fad
--- /dev/null
+++ b/arch/arm/include/asm/dma-iommu.h
@@ -0,0 +1,34 @@
+#ifndef ASMARM_DMA_IOMMU_H
+#define ASMARM_DMA_IOMMU_H
+
+#ifdef __KERNEL__
+
+#include <linux/mm_types.h>
+#include <linux/scatterlist.h>
+#include <linux/dma-debug.h>
+#include <linux/kmemcheck.h>
+
+struct dma_iommu_mapping {
+	/* iommu specific data */
+	struct iommu_domain	*domain;
+
+	void			*bitmap;
+	size_t			bits;
+	unsigned int		order;
+	dma_addr_t		base;
+
+	spinlock_t		lock;
+	struct kref		kref;
+};
+
+struct dma_iommu_mapping *
+arm_iommu_create_mapping(struct bus_type *bus, dma_addr_t base, size_t size,
+			 int order);
+
+void arm_iommu_release_mapping(struct dma_iommu_mapping *mapping);
+
+int arm_iommu_attach_device(struct device *dev,
+					struct dma_iommu_mapping *mapping);
+
+#endif /* __KERNEL__ */
+#endif
diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h
index cb3b7c981c4b..bbef15d04890 100644
--- a/arch/arm/include/asm/dma-mapping.h
+++ b/arch/arm/include/asm/dma-mapping.h
@@ -5,11 +5,35 @@
 
 #include <linux/mm_types.h>
 #include <linux/scatterlist.h>
+#include <linux/dma-attrs.h>
 #include <linux/dma-debug.h>
 
 #include <asm-generic/dma-coherent.h>
 #include <asm/memory.h>
 
+#define DMA_ERROR_CODE	(~0)
+extern struct dma_map_ops arm_dma_ops;
+
+static inline struct dma_map_ops *get_dma_ops(struct device *dev)
+{
+	if (dev && dev->archdata.dma_ops)
+		return dev->archdata.dma_ops;
+	return &arm_dma_ops;
+}
+
+static inline void set_dma_ops(struct device *dev, struct dma_map_ops *ops)
+{
+	BUG_ON(!dev);
+	dev->archdata.dma_ops = ops;
+}
+
+#include <asm-generic/dma-mapping-common.h>
+
+static inline int dma_set_mask(struct device *dev, u64 mask)
+{
+	return get_dma_ops(dev)->set_dma_mask(dev, mask);
+}
+
 #ifdef __arch_page_to_dma
 #error Please update to __arch_pfn_to_dma
 #endif
@@ -62,68 +86,11 @@ static inline dma_addr_t virt_to_dma(struct device *dev, void *addr)
 #endif
 
 /*
- * The DMA API is built upon the notion of "buffer ownership".  A buffer
- * is either exclusively owned by the CPU (and therefore may be accessed
- * by it) or exclusively owned by the DMA device.  These helper functions
- * represent the transitions between these two ownership states.
- *
- * Note, however, that on later ARMs, this notion does not work due to
- * speculative prefetches.  We model our approach on the assumption that
- * the CPU does do speculative prefetches, which means we clean caches
- * before transfers and delay cache invalidation until transfer completion.
- *
- * Private support functions: these are not part of the API and are
- * liable to change.  Drivers must not use these.
- */
-static inline void __dma_single_cpu_to_dev(const void *kaddr, size_t size,
-	enum dma_data_direction dir)
-{
-	extern void ___dma_single_cpu_to_dev(const void *, size_t,
-		enum dma_data_direction);
-
-	if (!arch_is_coherent())
-		___dma_single_cpu_to_dev(kaddr, size, dir);
-}
-
-static inline void __dma_single_dev_to_cpu(const void *kaddr, size_t size,
-	enum dma_data_direction dir)
-{
-	extern void ___dma_single_dev_to_cpu(const void *, size_t,
-		enum dma_data_direction);
-
-	if (!arch_is_coherent())
-		___dma_single_dev_to_cpu(kaddr, size, dir);
-}
-
-static inline void __dma_page_cpu_to_dev(struct page *page, unsigned long off,
-	size_t size, enum dma_data_direction dir)
-{
-	extern void ___dma_page_cpu_to_dev(struct page *, unsigned long,
-		size_t, enum dma_data_direction);
-
-	if (!arch_is_coherent())
-		___dma_page_cpu_to_dev(page, off, size, dir);
-}
-
-static inline void __dma_page_dev_to_cpu(struct page *page, unsigned long off,
-	size_t size, enum dma_data_direction dir)
-{
-	extern void ___dma_page_dev_to_cpu(struct page *, unsigned long,
-		size_t, enum dma_data_direction);
-
-	if (!arch_is_coherent())
-		___dma_page_dev_to_cpu(page, off, size, dir);
-}
-
-extern int dma_supported(struct device *, u64);
-extern int dma_set_mask(struct device *, u64);
-
-/*
  * DMA errors are defined by all-bits-set in the DMA address.
  */
 static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
-	return dma_addr == ~0;
+	return dma_addr == DMA_ERROR_CODE;
 }
 
 /*
@@ -141,69 +108,118 @@ static inline void dma_free_noncoherent(struct device *dev, size_t size,
 {
 }
 
+extern int dma_supported(struct device *dev, u64 mask);
+
 /**
- * dma_alloc_coherent - allocate consistent memory for DMA
+ * arm_dma_alloc - allocate consistent memory for DMA
  * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
  * @size: required memory size
  * @handle: bus-specific DMA address
+ * @attrs: optinal attributes that specific mapping properties
  *
- * Allocate some uncached, unbuffered memory for a device for
- * performing DMA.  This function allocates pages, and will
- * return the CPU-viewed address, and sets @handle to be the
- * device-viewed address.
+ * Allocate some memory for a device for performing DMA.  This function
+ * allocates pages, and will return the CPU-viewed address, and sets @handle
+ * to be the device-viewed address.
  */
-extern void *dma_alloc_coherent(struct device *, size_t, dma_addr_t *, gfp_t);
+extern void *arm_dma_alloc(struct device *dev, size_t size, dma_addr_t *handle,
+			   gfp_t gfp, struct dma_attrs *attrs);
+
+#define dma_alloc_coherent(d, s, h, f) dma_alloc_attrs(d, s, h, f, NULL)
+
+static inline void *dma_alloc_attrs(struct device *dev, size_t size,
+				       dma_addr_t *dma_handle, gfp_t flag,
+				       struct dma_attrs *attrs)
+{
+	struct dma_map_ops *ops = get_dma_ops(dev);
+	void *cpu_addr;
+	BUG_ON(!ops);
+
+	cpu_addr = ops->alloc(dev, size, dma_handle, flag, attrs);
+	debug_dma_alloc_coherent(dev, size, *dma_handle, cpu_addr);
+	return cpu_addr;
+}
 
 /**
- * dma_free_coherent - free memory allocated by dma_alloc_coherent
+ * arm_dma_free - free memory allocated by arm_dma_alloc
  * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
  * @size: size of memory originally requested in dma_alloc_coherent
  * @cpu_addr: CPU-view address returned from dma_alloc_coherent
  * @handle: device-view address returned from dma_alloc_coherent
+ * @attrs: optinal attributes that specific mapping properties
  *
  * Free (and unmap) a DMA buffer previously allocated by
- * dma_alloc_coherent().
+ * arm_dma_alloc().
  *
  * References to memory and mappings associated with cpu_addr/handle
  * during and after this call executing are illegal.
  */
-extern void dma_free_coherent(struct device *, size_t, void *, dma_addr_t);
+extern void arm_dma_free(struct device *dev, size_t size, void *cpu_addr,
+			 dma_addr_t handle, struct dma_attrs *attrs);
+
+#define dma_free_coherent(d, s, c, h) dma_free_attrs(d, s, c, h, NULL)
+
+static inline void dma_free_attrs(struct device *dev, size_t size,
+				     void *cpu_addr, dma_addr_t dma_handle,
+				     struct dma_attrs *attrs)
+{
+	struct dma_map_ops *ops = get_dma_ops(dev);
+	BUG_ON(!ops);
+
+	debug_dma_free_coherent(dev, size, cpu_addr, dma_handle);
+	ops->free(dev, size, cpu_addr, dma_handle, attrs);
+}
 
 /**
- * dma_mmap_coherent - map a coherent DMA allocation into user space
+ * arm_dma_mmap - map a coherent DMA allocation into user space
  * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
  * @vma: vm_area_struct describing requested user mapping
  * @cpu_addr: kernel CPU-view address returned from dma_alloc_coherent
  * @handle: device-view address returned from dma_alloc_coherent
  * @size: size of memory originally requested in dma_alloc_coherent
+ * @attrs: optinal attributes that specific mapping properties
  *
  * Map a coherent DMA buffer previously allocated by dma_alloc_coherent
  * into user space.  The coherent DMA buffer must not be freed by the
  * driver until the user space mapping has been released.
  */
-int dma_mmap_coherent(struct device *, struct vm_area_struct *,
-		void *, dma_addr_t, size_t);
+extern int arm_dma_mmap(struct device *dev, struct vm_area_struct *vma,
+			void *cpu_addr, dma_addr_t dma_addr, size_t size,
+			struct dma_attrs *attrs);
 
+#define dma_mmap_coherent(d, v, c, h, s) dma_mmap_attrs(d, v, c, h, s, NULL)
 
-/**
- * dma_alloc_writecombine - allocate writecombining memory for DMA
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @size: required memory size
- * @handle: bus-specific DMA address
- *
- * Allocate some uncached, buffered memory for a device for
- * performing DMA.  This function allocates pages, and will
- * return the CPU-viewed address, and sets @handle to be the
- * device-viewed address.
- */
-extern void *dma_alloc_writecombine(struct device *, size_t, dma_addr_t *,
-		gfp_t);
+static inline int dma_mmap_attrs(struct device *dev, struct vm_area_struct *vma,
+				  void *cpu_addr, dma_addr_t dma_addr,
+				  size_t size, struct dma_attrs *attrs)
+{
+	struct dma_map_ops *ops = get_dma_ops(dev);
+	BUG_ON(!ops);
+	return ops->mmap(dev, vma, cpu_addr, dma_addr, size, attrs);
+}
+
+static inline void *dma_alloc_writecombine(struct device *dev, size_t size,
+				       dma_addr_t *dma_handle, gfp_t flag)
+{
+	DEFINE_DMA_ATTRS(attrs);
+	dma_set_attr(DMA_ATTR_WRITE_COMBINE, &attrs);
+	return dma_alloc_attrs(dev, size, dma_handle, flag, &attrs);
+}
 
-#define dma_free_writecombine(dev,size,cpu_addr,handle) \
-	dma_free_coherent(dev,size,cpu_addr,handle)
+static inline void dma_free_writecombine(struct device *dev, size_t size,
+				     void *cpu_addr, dma_addr_t dma_handle)
+{
+	DEFINE_DMA_ATTRS(attrs);
+	dma_set_attr(DMA_ATTR_WRITE_COMBINE, &attrs);
+	return dma_free_attrs(dev, size, cpu_addr, dma_handle, &attrs);
+}
 
-int dma_mmap_writecombine(struct device *, struct vm_area_struct *,
-		void *, dma_addr_t, size_t);
+static inline int dma_mmap_writecombine(struct device *dev, struct vm_area_struct *vma,
+		      void *cpu_addr, dma_addr_t dma_addr, size_t size)
+{
+	DEFINE_DMA_ATTRS(attrs);
+	dma_set_attr(DMA_ATTR_WRITE_COMBINE, &attrs);
+	return dma_mmap_attrs(dev, vma, cpu_addr, dma_addr, size, &attrs);
+}
 
 /*
  * This can be called during boot to increase the size of the consistent
@@ -212,8 +228,6 @@ int dma_mmap_writecombine(struct device *, struct vm_area_struct *,
  */
 extern void __init init_consistent_dma_size(unsigned long size);
 
-
-#ifdef CONFIG_DMABOUNCE
 /*
  * For SA-1111, IXP425, and ADI systems  the dma-mapping functions are "magic"
  * and utilize bounce buffers as needed to work around limited DMA windows.
@@ -253,222 +267,19 @@ extern int dmabounce_register_dev(struct device *, unsigned long,
  */
 extern void dmabounce_unregister_dev(struct device *);
 
-/*
- * The DMA API, implemented by dmabounce.c.  See below for descriptions.
- */
-extern dma_addr_t __dma_map_page(struct device *, struct page *,
-		unsigned long, size_t, enum dma_data_direction);
-extern void __dma_unmap_page(struct device *, dma_addr_t, size_t,
-		enum dma_data_direction);
-
-/*
- * Private functions
- */
-int dmabounce_sync_for_cpu(struct device *, dma_addr_t, unsigned long,
-		size_t, enum dma_data_direction);
-int dmabounce_sync_for_device(struct device *, dma_addr_t, unsigned long,
-		size_t, enum dma_data_direction);
-#else
-static inline int dmabounce_sync_for_cpu(struct device *d, dma_addr_t addr,
-	unsigned long offset, size_t size, enum dma_data_direction dir)
-{
-	return 1;
-}
 
-static inline int dmabounce_sync_for_device(struct device *d, dma_addr_t addr,
-	unsigned long offset, size_t size, enum dma_data_direction dir)
-{
-	return 1;
-}
-
-
-static inline dma_addr_t __dma_map_page(struct device *dev, struct page *page,
-	     unsigned long offset, size_t size, enum dma_data_direction dir)
-{
-	__dma_page_cpu_to_dev(page, offset, size, dir);
-	return pfn_to_dma(dev, page_to_pfn(page)) + offset;
-}
-
-static inline void __dma_unmap_page(struct device *dev, dma_addr_t handle,
-		size_t size, enum dma_data_direction dir)
-{
-	__dma_page_dev_to_cpu(pfn_to_page(dma_to_pfn(dev, handle)),
-		handle & ~PAGE_MASK, size, dir);
-}
-#endif /* CONFIG_DMABOUNCE */
-
-/**
- * dma_map_single - map a single buffer for streaming DMA
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @cpu_addr: CPU direct mapped address of buffer
- * @size: size of buffer to map
- * @dir: DMA transfer direction
- *
- * Ensure that any data held in the cache is appropriately discarded
- * or written back.
- *
- * The device owns this memory once this call has completed.  The CPU
- * can regain ownership by calling dma_unmap_single() or
- * dma_sync_single_for_cpu().
- */
-static inline dma_addr_t dma_map_single(struct device *dev, void *cpu_addr,
-		size_t size, enum dma_data_direction dir)
-{
-	unsigned long offset;
-	struct page *page;
-	dma_addr_t addr;
-
-	BUG_ON(!virt_addr_valid(cpu_addr));
-	BUG_ON(!virt_addr_valid(cpu_addr + size - 1));
-	BUG_ON(!valid_dma_direction(dir));
-
-	page = virt_to_page(cpu_addr);
-	offset = (unsigned long)cpu_addr & ~PAGE_MASK;
-	addr = __dma_map_page(dev, page, offset, size, dir);
-	debug_dma_map_page(dev, page, offset, size, dir, addr, true);
-
-	return addr;
-}
-
-/**
- * dma_map_page - map a portion of a page for streaming DMA
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @page: page that buffer resides in
- * @offset: offset into page for start of buffer
- * @size: size of buffer to map
- * @dir: DMA transfer direction
- *
- * Ensure that any data held in the cache is appropriately discarded
- * or written back.
- *
- * The device owns this memory once this call has completed.  The CPU
- * can regain ownership by calling dma_unmap_page().
- */
-static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
-	     unsigned long offset, size_t size, enum dma_data_direction dir)
-{
-	dma_addr_t addr;
-
-	BUG_ON(!valid_dma_direction(dir));
-
-	addr = __dma_map_page(dev, page, offset, size, dir);
-	debug_dma_map_page(dev, page, offset, size, dir, addr, false);
-
-	return addr;
-}
-
-/**
- * dma_unmap_single - unmap a single buffer previously mapped
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @handle: DMA address of buffer
- * @size: size of buffer (same as passed to dma_map_single)
- * @dir: DMA transfer direction (same as passed to dma_map_single)
- *
- * Unmap a single streaming mode DMA translation.  The handle and size
- * must match what was provided in the previous dma_map_single() call.
- * All other usages are undefined.
- *
- * After this call, reads by the CPU to the buffer are guaranteed to see
- * whatever the device wrote there.
- */
-static inline void dma_unmap_single(struct device *dev, dma_addr_t handle,
-		size_t size, enum dma_data_direction dir)
-{
-	debug_dma_unmap_page(dev, handle, size, dir, true);
-	__dma_unmap_page(dev, handle, size, dir);
-}
-
-/**
- * dma_unmap_page - unmap a buffer previously mapped through dma_map_page()
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @handle: DMA address of buffer
- * @size: size of buffer (same as passed to dma_map_page)
- * @dir: DMA transfer direction (same as passed to dma_map_page)
- *
- * Unmap a page streaming mode DMA translation.  The handle and size
- * must match what was provided in the previous dma_map_page() call.
- * All other usages are undefined.
- *
- * After this call, reads by the CPU to the buffer are guaranteed to see
- * whatever the device wrote there.
- */
-static inline void dma_unmap_page(struct device *dev, dma_addr_t handle,
-		size_t size, enum dma_data_direction dir)
-{
-	debug_dma_unmap_page(dev, handle, size, dir, false);
-	__dma_unmap_page(dev, handle, size, dir);
-}
-
-/**
- * dma_sync_single_range_for_cpu
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @handle: DMA address of buffer
- * @offset: offset of region to start sync
- * @size: size of region to sync
- * @dir: DMA transfer direction (same as passed to dma_map_single)
- *
- * Make physical memory consistent for a single streaming mode DMA
- * translation after a transfer.
- *
- * If you perform a dma_map_single() but wish to interrogate the
- * buffer using the cpu, yet do not wish to teardown the PCI dma
- * mapping, you must call this function before doing so.  At the
- * next point you give the PCI dma address back to the card, you
- * must first the perform a dma_sync_for_device, and then the
- * device again owns the buffer.
- */
-static inline void dma_sync_single_range_for_cpu(struct device *dev,
-		dma_addr_t handle, unsigned long offset, size_t size,
-		enum dma_data_direction dir)
-{
-	BUG_ON(!valid_dma_direction(dir));
-
-	debug_dma_sync_single_for_cpu(dev, handle + offset, size, dir);
-
-	if (!dmabounce_sync_for_cpu(dev, handle, offset, size, dir))
-		return;
-
-	__dma_single_dev_to_cpu(dma_to_virt(dev, handle) + offset, size, dir);
-}
-
-static inline void dma_sync_single_range_for_device(struct device *dev,
-		dma_addr_t handle, unsigned long offset, size_t size,
-		enum dma_data_direction dir)
-{
-	BUG_ON(!valid_dma_direction(dir));
-
-	debug_dma_sync_single_for_device(dev, handle + offset, size, dir);
-
-	if (!dmabounce_sync_for_device(dev, handle, offset, size, dir))
-		return;
-
-	__dma_single_cpu_to_dev(dma_to_virt(dev, handle) + offset, size, dir);
-}
-
-static inline void dma_sync_single_for_cpu(struct device *dev,
-		dma_addr_t handle, size_t size, enum dma_data_direction dir)
-{
-	dma_sync_single_range_for_cpu(dev, handle, 0, size, dir);
-}
-
-static inline void dma_sync_single_for_device(struct device *dev,
-		dma_addr_t handle, size_t size, enum dma_data_direction dir)
-{
-	dma_sync_single_range_for_device(dev, handle, 0, size, dir);
-}
 
 /*
  * The scatter list versions of the above methods.
  */
-extern int dma_map_sg(struct device *, struct scatterlist *, int,
-		enum dma_data_direction);
-extern void dma_unmap_sg(struct device *, struct scatterlist *, int,
+extern int arm_dma_map_sg(struct device *, struct scatterlist *, int,
+		enum dma_data_direction, struct dma_attrs *attrs);
+extern void arm_dma_unmap_sg(struct device *, struct scatterlist *, int,
+		enum dma_data_direction, struct dma_attrs *attrs);
+extern void arm_dma_sync_sg_for_cpu(struct device *, struct scatterlist *, int,
 		enum dma_data_direction);
-extern void dma_sync_sg_for_cpu(struct device *, struct scatterlist *, int,
+extern void arm_dma_sync_sg_for_device(struct device *, struct scatterlist *, int,
 		enum dma_data_direction);
-extern void dma_sync_sg_for_device(struct device *, struct scatterlist *, int,
-		enum dma_data_direction);
-
 
 #endif /* __KERNEL__ */
 #endif
diff --git a/arch/arm/include/asm/glue-df.h b/arch/arm/include/asm/glue-df.h
index 354d571e8bcc..8cacbcda76da 100644
--- a/arch/arm/include/asm/glue-df.h
+++ b/arch/arm/include/asm/glue-df.h
@@ -31,14 +31,6 @@
 #undef CPU_DABORT_HANDLER
 #undef MULTI_DABORT
 
-#if defined(CONFIG_CPU_ARM610)
-# ifdef CPU_DABORT_HANDLER
-#  define MULTI_DABORT 1
-# else
-#  define CPU_DABORT_HANDLER cpu_arm6_data_abort
-# endif
-#endif
-
 #if defined(CONFIG_CPU_ARM710)
 # ifdef CPU_DABORT_HANDLER
 #  define MULTI_DABORT 1
diff --git a/arch/arm/include/asm/glue-proc.h b/arch/arm/include/asm/glue-proc.h
index e2be7f142668..ac1dd54724b6 100644
--- a/arch/arm/include/asm/glue-proc.h
+++ b/arch/arm/include/asm/glue-proc.h
@@ -23,15 +23,6 @@
  * CPU_NAME - the prefix for CPU related functions
  */
 
-#ifdef CONFIG_CPU_ARM610
-# ifdef CPU_NAME
-#  undef  MULTI_CPU
-#  define MULTI_CPU
-# else
-#  define CPU_NAME cpu_arm6
-# endif
-#endif
-
 #ifdef CONFIG_CPU_ARM7TDMI
 # ifdef CPU_NAME
 #  undef  MULTI_CPU
@@ -41,15 +32,6 @@
 # endif
 #endif
 
-#ifdef CONFIG_CPU_ARM710
-# ifdef CPU_NAME
-#  undef  MULTI_CPU
-#  define MULTI_CPU
-# else
-#  define CPU_NAME cpu_arm7
-# endif
-#endif
-
 #ifdef CONFIG_CPU_ARM720T
 # ifdef CPU_NAME
 #  undef  MULTI_CPU
diff --git a/arch/arm/include/asm/hardware/cs89712.h b/arch/arm/include/asm/hardware/cs89712.h
deleted file mode 100644
index f75626933e94..000000000000
--- a/arch/arm/include/asm/hardware/cs89712.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- *  arch/arm/include/asm/hardware/cs89712.h
- *
- *  This file contains the hardware definitions of the CS89712
- *  additional internal registers.
- *
- *  Copyright (C) 2001 Thomas Gleixner autronix automation <gleixner@autronix.de>
- *			
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_HARDWARE_CS89712_H
-#define __ASM_HARDWARE_CS89712_H
-
-/*
-*	CS89712 additional registers
-*/
-                                  
-#define PCDR			0x0002	/* Port C Data register ---------------------------- */
-#define PCDDR			0x0042	/* Port C Data Direction register ------------------ */
-#define SDCONF			0x2300  /* SDRAM Configuration register ---------------------*/
-#define SDRFPR			0x2340  /* SDRAM Refresh period register --------------------*/
-
-#define SDCONF_ACTIVE		(1 << 10)
-#define SDCONF_CLKCTL		(1 << 9)
-#define SDCONF_WIDTH_4		(0 << 7)
-#define SDCONF_WIDTH_8		(1 << 7)
-#define SDCONF_WIDTH_16		(2 << 7)
-#define SDCONF_WIDTH_32		(3 << 7)
-#define SDCONF_SIZE_16		(0 << 5)
-#define SDCONF_SIZE_64		(1 << 5)
-#define SDCONF_SIZE_128		(2 << 5)
-#define SDCONF_SIZE_256		(3 << 5)
-#define SDCONF_CASLAT_2		(2)
-#define SDCONF_CASLAT_3		(3)
-
-#endif /* __ASM_HARDWARE_CS89712_H */
diff --git a/arch/arm/include/asm/hardware/ep7212.h b/arch/arm/include/asm/hardware/ep7212.h
deleted file mode 100644
index 3b43bbeaf1db..000000000000
--- a/arch/arm/include/asm/hardware/ep7212.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- *  arch/arm/include/asm/hardware/ep7212.h
- *
- *  This file contains the hardware definitions of the EP7212 internal
- *  registers.
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_HARDWARE_EP7212_H
-#define __ASM_HARDWARE_EP7212_H
-
-/*
- * define EP7212_BASE to be the base address of the region
- * you want to access.
- */
-
-#define EP7212_PHYS_BASE	(0x80000000)
-
-#ifndef __ASSEMBLY__
-#define ep_readl(off)		__raw_readl(EP7212_BASE + (off))
-#define ep_writel(val,off)	__raw_writel(val, EP7212_BASE + (off))
-#endif
-
-/*
- * These registers are specific to the EP7212 only
- */
-#define DAIR			0x2000
-#define DAIR0			0x2040
-#define DAIDR1			0x2080
-#define DAIDR2			0x20c0
-#define DAISR			0x2100
-#define SYSCON3			0x2200
-#define INTSR3			0x2240
-#define INTMR3			0x2280
-#define LEDFLSH			0x22c0
-
-#define DAIR_DAIEN		(1 << 16)
-#define DAIR_ECS		(1 << 17)
-#define DAIR_LCTM		(1 << 19)
-#define DAIR_LCRM		(1 << 20)
-#define DAIR_RCTM		(1 << 21)
-#define DAIR_RCRM		(1 << 22)
-#define DAIR_LBM		(1 << 23)
-
-#define DAIDR2_FIFOEN		(1 << 15)
-#define DAIDR2_FIFOLEFT		(0x0d << 16)
-#define DAIDR2_FIFORIGHT	(0x11 << 16)
-
-#define DAISR_RCTS		(1 << 0)
-#define DAISR_RCRS		(1 << 1)
-#define DAISR_LCTS		(1 << 2)
-#define DAISR_LCRS		(1 << 3)
-#define DAISR_RCTU		(1 << 4)
-#define DAISR_RCRO		(1 << 5)
-#define DAISR_LCTU		(1 << 6)
-#define DAISR_LCRO		(1 << 7)
-#define DAISR_RCNF		(1 << 8)
-#define DAISR_RCNE		(1 << 9)
-#define DAISR_LCNF		(1 << 10)
-#define DAISR_LCNE		(1 << 11)
-#define DAISR_FIFO		(1 << 12)
-
-#define SYSCON3_ADCCON		(1 << 0)
-#define SYSCON3_DAISEL		(1 << 3)
-#define SYSCON3_ADCCKNSEN	(1 << 4)
-#define SYSCON3_FASTWAKE	(1 << 8)
-#define SYSCON3_DAIEN		(1 << 9)
-
-#endif /* __ASM_HARDWARE_EP7212_H */
diff --git a/arch/arm/include/asm/hardware/it8152.h b/arch/arm/include/asm/hardware/it8152.h
index 73f84fa4f366..d36a73d7c0e8 100644
--- a/arch/arm/include/asm/hardware/it8152.h
+++ b/arch/arm/include/asm/hardware/it8152.h
@@ -110,6 +110,6 @@ extern void it8152_irq_demux(unsigned int irq, struct irq_desc *desc);
 extern void it8152_init_irq(void);
 extern int it8152_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
 extern int it8152_pci_setup(int nr, struct pci_sys_data *sys);
-extern struct pci_bus *it8152_pci_scan_bus(int nr, struct pci_sys_data *sys);
+extern struct pci_ops it8152_ops;
 
 #endif /* __ASM_HARDWARE_IT8152_H */
diff --git a/arch/arm/include/asm/hardware/pl080.h b/arch/arm/include/asm/hardware/pl080.h
index 33c78d7af2e1..4eea2107214b 100644
--- a/arch/arm/include/asm/hardware/pl080.h
+++ b/arch/arm/include/asm/hardware/pl080.h
@@ -102,6 +102,8 @@
 #define PL080_WIDTH_16BIT			(0x1)
 #define PL080_WIDTH_32BIT			(0x2)
 
+#define PL080N_CONFIG_ITPROT			(1 << 20)
+#define PL080N_CONFIG_SECPROT			(1 << 19)
 #define PL080_CONFIG_HALT			(1 << 18)
 #define PL080_CONFIG_ACTIVE			(1 << 17)  /* RO */
 #define PL080_CONFIG_LOCK			(1 << 16)
diff --git a/arch/arm/include/asm/hardware/uengine.h b/arch/arm/include/asm/hardware/uengine.h
deleted file mode 100644
index b442d65c6593..000000000000
--- a/arch/arm/include/asm/hardware/uengine.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * Generic library functions for the microengines found on the Intel
- * IXP2000 series of network processors.
- *
- * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
- * Dedicated to Marija Kulikova.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as
- * published by the Free Software Foundation; either version 2.1 of the
- * License, or (at your option) any later version.
- */
-
-#ifndef __IXP2000_UENGINE_H
-#define __IXP2000_UENGINE_H
-
-extern u32 ixp2000_uengine_mask;
-
-struct ixp2000_uengine_code
-{
-	u32	cpu_model_bitmask;
-	u8	cpu_min_revision;
-	u8	cpu_max_revision;
-
-	u32	uengine_parameters;
-
-	struct ixp2000_reg_value {
-		int	reg;
-		u32	value;
-	} *initial_reg_values;
-
-	int	num_insns;
-	u8	*insns;
-};
-
-u32 ixp2000_uengine_csr_read(int uengine, int offset);
-void ixp2000_uengine_csr_write(int uengine, int offset, u32 value);
-void ixp2000_uengine_reset(u32 uengine_mask);
-void ixp2000_uengine_set_mode(int uengine, u32 mode);
-void ixp2000_uengine_load_microcode(int uengine, u8 *ucode, int insns);
-void ixp2000_uengine_init_context(int uengine, int context, int pc);
-void ixp2000_uengine_start_contexts(int uengine, u8 ctx_mask);
-void ixp2000_uengine_stop_contexts(int uengine, u8 ctx_mask);
-int ixp2000_uengine_load(int uengine, struct ixp2000_uengine_code *c);
-
-#define IXP2000_UENGINE_8_CONTEXTS		0x00000000
-#define IXP2000_UENGINE_4_CONTEXTS		0x80000000
-#define IXP2000_UENGINE_PRN_UPDATE_EVERY	0x40000000
-#define IXP2000_UENGINE_PRN_UPDATE_ON_ACCESS	0x00000000
-#define IXP2000_UENGINE_NN_FROM_SELF		0x00100000
-#define IXP2000_UENGINE_NN_FROM_PREVIOUS	0x00000000
-#define IXP2000_UENGINE_ASSERT_EMPTY_AT_3	0x000c0000
-#define IXP2000_UENGINE_ASSERT_EMPTY_AT_2	0x00080000
-#define IXP2000_UENGINE_ASSERT_EMPTY_AT_1	0x00040000
-#define IXP2000_UENGINE_ASSERT_EMPTY_AT_0	0x00000000
-#define IXP2000_UENGINE_LM_ADDR1_GLOBAL		0x00020000
-#define IXP2000_UENGINE_LM_ADDR1_PER_CONTEXT	0x00000000
-#define IXP2000_UENGINE_LM_ADDR0_GLOBAL		0x00010000
-#define IXP2000_UENGINE_LM_ADDR0_PER_CONTEXT	0x00000000
-
-
-#endif
diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
index df0ac0bb39aa..815c669fec0a 100644
--- a/arch/arm/include/asm/io.h
+++ b/arch/arm/include/asm/io.h
@@ -47,9 +47,9 @@ extern void __raw_readsb(const void __iomem *addr, void *data, int bytelen);
 extern void __raw_readsw(const void __iomem *addr, void *data, int wordlen);
 extern void __raw_readsl(const void __iomem *addr, void *data, int longlen);
 
-#define __raw_writeb(v,a)	(__chk_io_ptr(a), *(volatile unsigned char __force  *)(a) = (v))
-#define __raw_writew(v,a)	(__chk_io_ptr(a), *(volatile unsigned short __force *)(a) = (v))
-#define __raw_writel(v,a)	(__chk_io_ptr(a), *(volatile unsigned int __force   *)(a) = (v))
+#define __raw_writeb(v,a)	((void)(__chk_io_ptr(a), *(volatile unsigned char __force  *)(a) = (v)))
+#define __raw_writew(v,a)	((void)(__chk_io_ptr(a), *(volatile unsigned short __force *)(a) = (v)))
+#define __raw_writel(v,a)	((void)(__chk_io_ptr(a), *(volatile unsigned int __force   *)(a) = (v)))
 
 #define __raw_readb(a)		(__chk_io_ptr(a), *(volatile unsigned char __force  *)(a))
 #define __raw_readw(a)		(__chk_io_ptr(a), *(volatile unsigned short __force *)(a))
@@ -119,7 +119,7 @@ static inline void __iomem *__typesafe_io(unsigned long addr)
 #ifdef CONFIG_NEED_MACH_IO_H
 #include <mach/io.h>
 #else
-#define __io(a)		({ (void)(a); __typesafe_io(0); })
+#define __io(a)		__typesafe_io((a) & IO_SPACE_LIMIT)
 #endif
 
 /*
@@ -229,11 +229,9 @@ extern void _memset_io(volatile void __iomem *, int, size_t);
 #define readl_relaxed(c) ({ u32 __r = le32_to_cpu((__force __le32) \
 					__raw_readl(c)); __r; })
 
-#define writeb_relaxed(v,c)	((void)__raw_writeb(v,c))
-#define writew_relaxed(v,c)	((void)__raw_writew((__force u16) \
-					cpu_to_le16(v),c))
-#define writel_relaxed(v,c)	((void)__raw_writel((__force u32) \
-					cpu_to_le32(v),c))
+#define writeb_relaxed(v,c)	__raw_writeb(v,c)
+#define writew_relaxed(v,c)	__raw_writew((__force u16) cpu_to_le16(v),c)
+#define writel_relaxed(v,c)	__raw_writel((__force u32) cpu_to_le32(v),c)
 
 #define readb(c)		({ u8  __v = readb_relaxed(c); __iormb(); __v; })
 #define readw(c)		({ u16 __v = readw_relaxed(c); __iormb(); __v; })
@@ -281,12 +279,12 @@ extern void _memset_io(volatile void __iomem *, int, size_t);
 #define ioread16be(p)	({ unsigned int __v = be16_to_cpu((__force __be16)__raw_readw(p)); __iormb(); __v; })
 #define ioread32be(p)	({ unsigned int __v = be32_to_cpu((__force __be32)__raw_readl(p)); __iormb(); __v; })
 
-#define iowrite8(v,p)	({ __iowmb(); (void)__raw_writeb(v, p); })
-#define iowrite16(v,p)	({ __iowmb(); (void)__raw_writew((__force __u16)cpu_to_le16(v), p); })
-#define iowrite32(v,p)	({ __iowmb(); (void)__raw_writel((__force __u32)cpu_to_le32(v), p); })
+#define iowrite8(v,p)	({ __iowmb(); __raw_writeb(v, p); })
+#define iowrite16(v,p)	({ __iowmb(); __raw_writew((__force __u16)cpu_to_le16(v), p); })
+#define iowrite32(v,p)	({ __iowmb(); __raw_writel((__force __u32)cpu_to_le32(v), p); })
 
-#define iowrite16be(v,p) ({ __iowmb(); (void)__raw_writew((__force __u16)cpu_to_be16(v), p); })
-#define iowrite32be(v,p) ({ __iowmb(); (void)__raw_writel((__force __u32)cpu_to_be32(v), p); })
+#define iowrite16be(v,p) ({ __iowmb(); __raw_writew((__force __u16)cpu_to_be16(v), p); })
+#define iowrite32be(v,p) ({ __iowmb(); __raw_writel((__force __u32)cpu_to_be32(v), p); })
 
 #define ioread8_rep(p,d,c)	__raw_readsb(p,d,c)
 #define ioread16_rep(p,d,c)	__raw_readsw(p,d,c)
diff --git a/arch/arm/include/asm/jump_label.h b/arch/arm/include/asm/jump_label.h
index 5c5ca2ea62b0..bfc198c75913 100644
--- a/arch/arm/include/asm/jump_label.h
+++ b/arch/arm/include/asm/jump_label.h
@@ -14,7 +14,7 @@
 #define JUMP_LABEL_NOP	"nop"
 #endif
 
-static __always_inline bool arch_static_branch(struct jump_label_key *key)
+static __always_inline bool arch_static_branch(struct static_key *key)
 {
 	asm goto("1:\n\t"
 		 JUMP_LABEL_NOP "\n\t"
diff --git a/arch/arm/include/asm/kvm_para.h b/arch/arm/include/asm/kvm_para.h
new file mode 100644
index 000000000000..14fab8f0b957
--- /dev/null
+++ b/arch/arm/include/asm/kvm_para.h
@@ -0,0 +1 @@
+#include <asm-generic/kvm_para.h>
diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h
index d7692cafde7f..0b1c94b8c652 100644
--- a/arch/arm/include/asm/mach/arch.h
+++ b/arch/arm/include/asm/mach/arch.h
@@ -43,6 +43,7 @@ struct machine_desc {
 	void			(*init_irq)(void);
 	struct sys_timer	*timer;		/* system tick timer	*/
 	void			(*init_machine)(void);
+	void			(*init_late)(void);
 #ifdef CONFIG_MULTI_IRQ_HANDLER
 	void			(*handle_irq)(struct pt_regs *);
 #endif
diff --git a/arch/arm/include/asm/mach/map.h b/arch/arm/include/asm/mach/map.h
index b36f3654bf54..a6efcdd6fd25 100644
--- a/arch/arm/include/asm/mach/map.h
+++ b/arch/arm/include/asm/mach/map.h
@@ -30,6 +30,7 @@ struct map_desc {
 #define MT_MEMORY_DTCM		12
 #define MT_MEMORY_ITCM		13
 #define MT_MEMORY_SO		14
+#define MT_MEMORY_DMA_READY	15
 
 #ifdef CONFIG_MMU
 extern void iotable_init(struct map_desc *, int);
diff --git a/arch/arm/include/asm/mach/pci.h b/arch/arm/include/asm/mach/pci.h
index d943b7d20f11..26c511fddf8f 100644
--- a/arch/arm/include/asm/mach/pci.h
+++ b/arch/arm/include/asm/mach/pci.h
@@ -12,13 +12,14 @@
 #define __ASM_MACH_PCI_H
 
 struct pci_sys_data;
+struct pci_ops;
 struct pci_bus;
 
 struct hw_pci {
 #ifdef CONFIG_PCI_DOMAINS
 	int		domain;
 #endif
-	struct list_head buses;
+	struct pci_ops	*ops;
 	int		nr_controllers;
 	int		(*setup)(int nr, struct pci_sys_data *);
 	struct pci_bus *(*scan)(int nr, struct pci_sys_data *);
@@ -45,16 +46,10 @@ struct pci_sys_data {
 	u8		(*swizzle)(struct pci_dev *, u8 *);
 					/* IRQ mapping				*/
 	int		(*map_irq)(const struct pci_dev *, u8, u8);
-	struct hw_pci	*hw;
 	void		*private_data;	/* platform controller private data	*/
 };
 
 /*
- * This is the standard PCI-PCI bridge swizzling algorithm.
- */
-#define pci_std_swizzle pci_common_swizzle
-
-/*
  * Call this with your hw_pci struct to initialise the PCI system.
  */
 void pci_common_init(struct hw_pci *);
@@ -62,22 +57,22 @@ void pci_common_init(struct hw_pci *);
 /*
  * PCI controllers
  */
+extern struct pci_ops iop3xx_ops;
 extern int iop3xx_pci_setup(int nr, struct pci_sys_data *);
-extern struct pci_bus *iop3xx_pci_scan_bus(int nr, struct pci_sys_data *);
 extern void iop3xx_pci_preinit(void);
 extern void iop3xx_pci_preinit_cond(void);
 
+extern struct pci_ops dc21285_ops;
 extern int dc21285_setup(int nr, struct pci_sys_data *);
-extern struct pci_bus *dc21285_scan_bus(int nr, struct pci_sys_data *);
 extern void dc21285_preinit(void);
 extern void dc21285_postinit(void);
 
+extern struct pci_ops via82c505_ops;
 extern int via82c505_setup(int nr, struct pci_sys_data *);
-extern struct pci_bus *via82c505_scan_bus(int nr, struct pci_sys_data *);
 extern void via82c505_init(void *sysdata);
 
+extern struct pci_ops pci_v3_ops;
 extern int pci_v3_setup(int nr, struct pci_sys_data *);
-extern struct pci_bus *pci_v3_scan_bus(int nr, struct pci_sys_data *);
 extern void pci_v3_preinit(void);
 extern void pci_v3_postinit(void);
 
diff --git a/arch/arm/include/asm/mach/time.h b/arch/arm/include/asm/mach/time.h
index f73c908b7fa0..6ca945f534ab 100644
--- a/arch/arm/include/asm/mach/time.h
+++ b/arch/arm/include/asm/mach/time.h
@@ -42,4 +42,9 @@ struct sys_timer {
 
 extern void timer_tick(void);
 
+struct timespec;
+typedef void (*clock_access_fn)(struct timespec *);
+extern int register_persistent_clock(clock_access_fn read_boot,
+				     clock_access_fn read_persistent);
+
 #endif
diff --git a/arch/arm/include/asm/mmu.h b/arch/arm/include/asm/mmu.h
index b8e580a297e4..14965658a923 100644
--- a/arch/arm/include/asm/mmu.h
+++ b/arch/arm/include/asm/mmu.h
@@ -34,11 +34,4 @@ typedef struct {
 
 #endif
 
-/*
- * switch_mm() may do a full cache flush over the context switch,
- * so enable interrupts over the context switch to avoid high
- * latency.
- */
-#define __ARCH_WANT_INTERRUPTS_ON_CTXSW
-
 #endif
diff --git a/arch/arm/include/asm/mmu_context.h b/arch/arm/include/asm/mmu_context.h
index a0b3cac0547c..0306bc642c0d 100644
--- a/arch/arm/include/asm/mmu_context.h
+++ b/arch/arm/include/asm/mmu_context.h
@@ -43,45 +43,104 @@ void __check_kvm_seq(struct mm_struct *mm);
 #define ASID_FIRST_VERSION	(1 << ASID_BITS)
 
 extern unsigned int cpu_last_asid;
-#ifdef CONFIG_SMP
-DECLARE_PER_CPU(struct mm_struct *, current_mm);
-#endif
 
 void __init_new_context(struct task_struct *tsk, struct mm_struct *mm);
 void __new_context(struct mm_struct *mm);
+void cpu_set_reserved_ttbr0(void);
 
-static inline void check_context(struct mm_struct *mm)
+static inline void switch_new_context(struct mm_struct *mm)
 {
-	/*
-	 * This code is executed with interrupts enabled. Therefore,
-	 * mm->context.id cannot be updated to the latest ASID version
-	 * on a different CPU (and condition below not triggered)
-	 * without first getting an IPI to reset the context. The
-	 * alternative is to take a read_lock on mm->context.id_lock
-	 * (after changing its type to rwlock_t).
-	 */
-	if (unlikely((mm->context.id ^ cpu_last_asid) >> ASID_BITS))
-		__new_context(mm);
+	unsigned long flags;
+
+	__new_context(mm);
+
+	local_irq_save(flags);
+	cpu_switch_mm(mm->pgd, mm);
+	local_irq_restore(flags);
+}
 
+static inline void check_and_switch_context(struct mm_struct *mm,
+					    struct task_struct *tsk)
+{
 	if (unlikely(mm->context.kvm_seq != init_mm.context.kvm_seq))
 		__check_kvm_seq(mm);
+
+	/*
+	 * Required during context switch to avoid speculative page table
+	 * walking with the wrong TTBR.
+	 */
+	cpu_set_reserved_ttbr0();
+
+	if (!((mm->context.id ^ cpu_last_asid) >> ASID_BITS))
+		/*
+		 * The ASID is from the current generation, just switch to the
+		 * new pgd. This condition is only true for calls from
+		 * context_switch() and interrupts are already disabled.
+		 */
+		cpu_switch_mm(mm->pgd, mm);
+	else if (irqs_disabled())
+		/*
+		 * Defer the new ASID allocation until after the context
+		 * switch critical region since __new_context() cannot be
+		 * called with interrupts disabled (it sends IPIs).
+		 */
+		set_ti_thread_flag(task_thread_info(tsk), TIF_SWITCH_MM);
+	else
+		/*
+		 * That is a direct call to switch_mm() or activate_mm() with
+		 * interrupts enabled and a new context.
+		 */
+		switch_new_context(mm);
 }
 
 #define init_new_context(tsk,mm)	(__init_new_context(tsk,mm),0)
 
-#else
-
-static inline void check_context(struct mm_struct *mm)
+#define finish_arch_post_lock_switch \
+	finish_arch_post_lock_switch
+static inline void finish_arch_post_lock_switch(void)
 {
+	if (test_and_clear_thread_flag(TIF_SWITCH_MM))
+		switch_new_context(current->mm);
+}
+
+#else	/* !CONFIG_CPU_HAS_ASID */
+
 #ifdef CONFIG_MMU
+
+static inline void check_and_switch_context(struct mm_struct *mm,
+					    struct task_struct *tsk)
+{
 	if (unlikely(mm->context.kvm_seq != init_mm.context.kvm_seq))
 		__check_kvm_seq(mm);
-#endif
+
+	if (irqs_disabled())
+		/*
+		 * cpu_switch_mm() needs to flush the VIVT caches. To avoid
+		 * high interrupt latencies, defer the call and continue
+		 * running with the old mm. Since we only support UP systems
+		 * on non-ASID CPUs, the old mm will remain valid until the
+		 * finish_arch_post_lock_switch() call.
+		 */
+		set_ti_thread_flag(task_thread_info(tsk), TIF_SWITCH_MM);
+	else
+		cpu_switch_mm(mm->pgd, mm);
 }
 
+#define finish_arch_post_lock_switch \
+	finish_arch_post_lock_switch
+static inline void finish_arch_post_lock_switch(void)
+{
+	if (test_and_clear_thread_flag(TIF_SWITCH_MM)) {
+		struct mm_struct *mm = current->mm;
+		cpu_switch_mm(mm->pgd, mm);
+	}
+}
+
+#endif	/* CONFIG_MMU */
+
 #define init_new_context(tsk,mm)	0
 
-#endif
+#endif	/* CONFIG_CPU_HAS_ASID */
 
 #define destroy_context(mm)		do { } while(0)
 
@@ -119,12 +178,7 @@ switch_mm(struct mm_struct *prev, struct mm_struct *next,
 		__flush_icache_all();
 #endif
 	if (!cpumask_test_and_set_cpu(cpu, mm_cpumask(next)) || prev != next) {
-#ifdef CONFIG_SMP
-		struct mm_struct **crt_mm = &per_cpu(current_mm, cpu);
-		*crt_mm = next;
-#endif
-		check_context(next);
-		cpu_switch_mm(next->pgd, next);
+		check_and_switch_context(next, tsk);
 		if (cache_is_vivt())
 			cpumask_clear_cpu(cpu, mm_cpumask(prev));
 	}
diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h
index 5838361c48b3..ecf901902e44 100644
--- a/arch/arm/include/asm/page.h
+++ b/arch/arm/include/asm/page.h
@@ -34,7 +34,6 @@
  *	processor(s) we're building for.
  *
  *	We have the following to choose from:
- *	  v3		- ARMv3
  *	  v4wt		- ARMv4 with writethrough cache, without minicache
  *	  v4wb		- ARMv4 with writeback cache, without minicache
  *	  v4_mc		- ARMv4 with minicache
@@ -44,14 +43,6 @@
 #undef _USER
 #undef MULTI_USER
 
-#ifdef CONFIG_CPU_COPY_V3
-# ifdef _USER
-#  define MULTI_USER 1
-# else
-#  define _USER v3
-# endif
-#endif
-
 #ifdef CONFIG_CPU_COPY_V4WT
 # ifdef _USER
 #  define MULTI_USER 1
diff --git a/arch/arm/include/asm/pgtable-3level.h b/arch/arm/include/asm/pgtable-3level.h
index 759af70f9a0a..b24903549d1c 100644
--- a/arch/arm/include/asm/pgtable-3level.h
+++ b/arch/arm/include/asm/pgtable-3level.h
@@ -69,8 +69,6 @@
  */
 #define L_PTE_PRESENT		(_AT(pteval_t, 3) << 0)		/* Valid */
 #define L_PTE_FILE		(_AT(pteval_t, 1) << 2)		/* only when !PRESENT */
-#define L_PTE_BUFFERABLE	(_AT(pteval_t, 1) << 2)		/* AttrIndx[0] */
-#define L_PTE_CACHEABLE		(_AT(pteval_t, 1) << 3)		/* AttrIndx[1] */
 #define L_PTE_USER		(_AT(pteval_t, 1) << 6)		/* AP[1] */
 #define L_PTE_RDONLY		(_AT(pteval_t, 1) << 7)		/* AP[2] */
 #define L_PTE_SHARED		(_AT(pteval_t, 3) << 8)		/* SH[1:0], inner shareable */
diff --git a/arch/arm/include/asm/posix_types.h b/arch/arm/include/asm/posix_types.h
index efdf99045d87..d2de9cbbcd9b 100644
--- a/arch/arm/include/asm/posix_types.h
+++ b/arch/arm/include/asm/posix_types.h
@@ -22,9 +22,6 @@
 typedef unsigned short		__kernel_mode_t;
 #define __kernel_mode_t __kernel_mode_t
 
-typedef unsigned short		__kernel_nlink_t;
-#define __kernel_nlink_t __kernel_nlink_t
-
 typedef unsigned short		__kernel_ipc_pid_t;
 #define __kernel_ipc_pid_t __kernel_ipc_pid_t
 
diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h
index 5ac8d3d3e025..99afa7498260 100644
--- a/arch/arm/include/asm/processor.h
+++ b/arch/arm/include/asm/processor.h
@@ -77,9 +77,6 @@ struct task_struct;
 /* Free all resources held by a thread. */
 extern void release_thread(struct task_struct *);
 
-/* Prepare to copy thread state - unlazy all lazy status */
-#define prepare_to_copy(tsk)	do { } while (0)
-
 unsigned long get_wchan(struct task_struct *p);
 
 #if __LINUX_ARM_ARCH__ == 6 || defined(CONFIG_ARM_ERRATA_754327)
@@ -88,8 +85,6 @@ unsigned long get_wchan(struct task_struct *p);
 #define cpu_relax()			barrier()
 #endif
 
-void cpu_idle_wait(void);
-
 /*
  * Create a new kernel thread
  */
diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h
index 451808ba1211..355ece523f41 100644
--- a/arch/arm/include/asm/ptrace.h
+++ b/arch/arm/include/asm/ptrace.h
@@ -249,6 +249,11 @@ static inline unsigned long kernel_stack_pointer(struct pt_regs *regs)
 	return regs->ARM_sp;
 }
 
+static inline unsigned long user_stack_pointer(struct pt_regs *regs)
+{
+	return regs->ARM_sp;
+}
+
 #endif /* __KERNEL__ */
 
 #endif /* __ASSEMBLY__ */
diff --git a/arch/arm/include/asm/syscall.h b/arch/arm/include/asm/syscall.h
new file mode 100644
index 000000000000..c334a23ddf75
--- /dev/null
+++ b/arch/arm/include/asm/syscall.h
@@ -0,0 +1,93 @@
+/*
+ * Access to user system call parameters and results
+ *
+ * See asm-generic/syscall.h for descriptions of what we must do here.
+ */
+
+#ifndef _ASM_ARM_SYSCALL_H
+#define _ASM_ARM_SYSCALL_H
+
+#include <linux/err.h>
+
+extern const unsigned long sys_call_table[];
+
+static inline int syscall_get_nr(struct task_struct *task,
+				 struct pt_regs *regs)
+{
+	return task_thread_info(task)->syscall;
+}
+
+static inline void syscall_rollback(struct task_struct *task,
+				    struct pt_regs *regs)
+{
+	regs->ARM_r0 = regs->ARM_ORIG_r0;
+}
+
+static inline long syscall_get_error(struct task_struct *task,
+				     struct pt_regs *regs)
+{
+	unsigned long error = regs->ARM_r0;
+	return IS_ERR_VALUE(error) ? error : 0;
+}
+
+static inline long syscall_get_return_value(struct task_struct *task,
+					    struct pt_regs *regs)
+{
+	return regs->ARM_r0;
+}
+
+static inline void syscall_set_return_value(struct task_struct *task,
+					    struct pt_regs *regs,
+					    int error, long val)
+{
+	regs->ARM_r0 = (long) error ? error : val;
+}
+
+#define SYSCALL_MAX_ARGS 7
+
+static inline void syscall_get_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned int i, unsigned int n,
+					 unsigned long *args)
+{
+	if (i + n > SYSCALL_MAX_ARGS) {
+		unsigned long *args_bad = args + SYSCALL_MAX_ARGS - i;
+		unsigned int n_bad = n + i - SYSCALL_MAX_ARGS;
+		pr_warning("%s called with max args %d, handling only %d\n",
+			   __func__, i + n, SYSCALL_MAX_ARGS);
+		memset(args_bad, 0, n_bad * sizeof(args[0]));
+		n = SYSCALL_MAX_ARGS - i;
+	}
+
+	if (i == 0) {
+		args[0] = regs->ARM_ORIG_r0;
+		args++;
+		i++;
+		n--;
+	}
+
+	memcpy(args, &regs->ARM_r0 + i, n * sizeof(args[0]));
+}
+
+static inline void syscall_set_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned int i, unsigned int n,
+					 const unsigned long *args)
+{
+	if (i + n > SYSCALL_MAX_ARGS) {
+		pr_warning("%s called with max args %d, handling only %d\n",
+			   __func__, i + n, SYSCALL_MAX_ARGS);
+		n = SYSCALL_MAX_ARGS - i;
+	}
+
+	if (i == 0) {
+		regs->ARM_ORIG_r0 = args[0];
+		args++;
+		i++;
+		n--;
+	}
+
+	memcpy(&regs->ARM_r0 + i, args, n * sizeof(args[0]));
+}
+
+#endif /* _ASM_ARM_SYSCALL_H */
diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h
index d4c24d412a8d..b79f8e97f775 100644
--- a/arch/arm/include/asm/thread_info.h
+++ b/arch/arm/include/asm/thread_info.h
@@ -118,6 +118,13 @@ extern void iwmmxt_task_switch(struct thread_info *);
 extern void vfp_sync_hwstate(struct thread_info *);
 extern void vfp_flush_hwstate(struct thread_info *);
 
+struct user_vfp;
+struct user_vfp_exc;
+
+extern int vfp_preserve_user_clear_hwstate(struct user_vfp __user *,
+					   struct user_vfp_exc __user *);
+extern int vfp_restore_user_hwstate(struct user_vfp __user *,
+				    struct user_vfp_exc __user *);
 #endif
 
 /*
@@ -141,11 +148,13 @@ extern void vfp_flush_hwstate(struct thread_info *);
 #define TIF_NOTIFY_RESUME	2	/* callback before returning to user */
 #define TIF_SYSCALL_TRACE	8
 #define TIF_SYSCALL_AUDIT	9
+#define TIF_SYSCALL_RESTARTSYS	10
 #define TIF_POLLING_NRFLAG	16
 #define TIF_USING_IWMMXT	17
 #define TIF_MEMDIE		18	/* is terminating due to OOM killer */
 #define TIF_RESTORE_SIGMASK	20
 #define TIF_SECCOMP		21
+#define TIF_SWITCH_MM		22	/* deferred switch_mm */
 
 #define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
@@ -154,16 +163,17 @@ extern void vfp_flush_hwstate(struct thread_info *);
 #define _TIF_SYSCALL_AUDIT	(1 << TIF_SYSCALL_AUDIT)
 #define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
 #define _TIF_USING_IWMMXT	(1 << TIF_USING_IWMMXT)
-#define _TIF_RESTORE_SIGMASK	(1 << TIF_RESTORE_SIGMASK)
 #define _TIF_SECCOMP		(1 << TIF_SECCOMP)
+#define _TIF_SYSCALL_RESTARTSYS	(1 << TIF_SYSCALL_RESTARTSYS)
 
 /* Checks for any syscall work in entry-common.S */
-#define _TIF_SYSCALL_WORK (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT)
+#define _TIF_SYSCALL_WORK (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \
+			   _TIF_SYSCALL_RESTARTSYS)
 
 /*
  * Change these and you break ASM code in entry-common.S
  */
-#define _TIF_WORK_MASK		0x000000ff
+#define _TIF_WORK_MASK		(_TIF_NEED_RESCHED | _TIF_SIGPENDING | _TIF_NOTIFY_RESUME)
 
 #endif /* __KERNEL__ */
 #endif /* __ASM_ARM_THREAD_INFO_H */
diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h
index 85fe61e73202..6e924d3a77eb 100644
--- a/arch/arm/include/asm/tlbflush.h
+++ b/arch/arm/include/asm/tlbflush.h
@@ -65,21 +65,6 @@
 #define MULTI_TLB 1
 #endif
 
-#define v3_tlb_flags	(TLB_V3_FULL | TLB_V3_PAGE)
-
-#ifdef CONFIG_CPU_TLB_V3
-# define v3_possible_flags	v3_tlb_flags
-# define v3_always_flags	v3_tlb_flags
-# ifdef _TLB
-#  define MULTI_TLB 1
-# else
-#  define _TLB v3
-# endif
-#else
-# define v3_possible_flags	0
-# define v3_always_flags	(-1UL)
-#endif
-
 #define v4_tlb_flags	(TLB_V4_U_FULL | TLB_V4_U_PAGE)
 
 #ifdef CONFIG_CPU_TLB_V4WT
@@ -298,8 +283,7 @@ extern struct cpu_tlb_fns cpu_tlb;
  * implemented the "%?" method, but this has been discontinued due to too
  * many people getting it wrong.
  */
-#define possible_tlb_flags	(v3_possible_flags | \
-				 v4_possible_flags | \
+#define possible_tlb_flags	(v4_possible_flags | \
 				 v4wbi_possible_flags | \
 				 fr_possible_flags | \
 				 v4wb_possible_flags | \
@@ -307,8 +291,7 @@ extern struct cpu_tlb_fns cpu_tlb;
 				 v6wbi_possible_flags | \
 				 v7wbi_possible_flags)
 
-#define always_tlb_flags	(v3_always_flags & \
-				 v4_always_flags & \
+#define always_tlb_flags	(v4_always_flags & \
 				 v4wbi_always_flags & \
 				 fr_always_flags & \
 				 v4wb_always_flags & \
diff --git a/arch/arm/include/asm/tls.h b/arch/arm/include/asm/tls.h
index 60843eb0f61c..73409e6c0251 100644
--- a/arch/arm/include/asm/tls.h
+++ b/arch/arm/include/asm/tls.h
@@ -7,6 +7,8 @@
 
 	.macro set_tls_v6k, tp, tmp1, tmp2
 	mcr	p15, 0, \tp, c13, c0, 3		@ set TLS register
+	mov	\tmp1, #0
+	mcr	p15, 0, \tmp1, c13, c0, 2	@ clear user r/w TLS register
 	.endm
 
 	.macro set_tls_v6, tp, tmp1, tmp2
@@ -15,6 +17,8 @@
 	mov	\tmp2, #0xffff0fff
 	tst	\tmp1, #HWCAP_TLS		@ hardware TLS available?
 	mcrne	p15, 0, \tp, c13, c0, 3		@ yes, set TLS register
+	movne	\tmp1, #0
+	mcrne	p15, 0, \tmp1, c13, c0, 2	@ clear user r/w TLS register
 	streq	\tp, [\tmp2, #-15]		@ set TLS value at 0xffff0ff0
 	.endm
 
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 7b787d642af4..7ad2d5cf7008 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -34,6 +34,7 @@ obj-$(CONFIG_ARM_CPU_SUSPEND)	+= sleep.o suspend.o
 obj-$(CONFIG_SMP)		+= smp.o smp_tlb.o
 obj-$(CONFIG_HAVE_ARM_SCU)	+= smp_scu.o
 obj-$(CONFIG_HAVE_ARM_TWD)	+= smp_twd.o
+obj-$(CONFIG_ARM_ARCH_TIMER)	+= arch_timer.o
 obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o insn.o
 obj-$(CONFIG_FUNCTION_GRAPH_TRACER)	+= ftrace.o insn.o
 obj-$(CONFIG_JUMP_LABEL)	+= jump_label.o insn.o patch.o
@@ -81,4 +82,4 @@ head-y			:= head$(MMUEXT).o
 obj-$(CONFIG_DEBUG_LL)	+= debug.o
 obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
 
-extra-y := $(head-y) init_task.o vmlinux.lds
+extra-y := $(head-y) vmlinux.lds
diff --git a/arch/arm/kernel/arch_timer.c b/arch/arm/kernel/arch_timer.c
new file mode 100644
index 000000000000..dd58035621f7
--- /dev/null
+++ b/arch/arm/kernel/arch_timer.c
@@ -0,0 +1,350 @@
+/*
+ *  linux/arch/arm/kernel/arch_timer.c
+ *
+ *  Copyright (C) 2011 ARM Ltd.
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/smp.h>
+#include <linux/cpu.h>
+#include <linux/jiffies.h>
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/of_irq.h>
+#include <linux/io.h>
+
+#include <asm/cputype.h>
+#include <asm/localtimer.h>
+#include <asm/arch_timer.h>
+#include <asm/system_info.h>
+#include <asm/sched_clock.h>
+
+static unsigned long arch_timer_rate;
+static int arch_timer_ppi;
+static int arch_timer_ppi2;
+
+static struct clock_event_device __percpu **arch_timer_evt;
+
+/*
+ * Architected system timer support.
+ */
+
+#define ARCH_TIMER_CTRL_ENABLE		(1 << 0)
+#define ARCH_TIMER_CTRL_IT_MASK		(1 << 1)
+#define ARCH_TIMER_CTRL_IT_STAT		(1 << 2)
+
+#define ARCH_TIMER_REG_CTRL		0
+#define ARCH_TIMER_REG_FREQ		1
+#define ARCH_TIMER_REG_TVAL		2
+
+static void arch_timer_reg_write(int reg, u32 val)
+{
+	switch (reg) {
+	case ARCH_TIMER_REG_CTRL:
+		asm volatile("mcr p15, 0, %0, c14, c2, 1" : : "r" (val));
+		break;
+	case ARCH_TIMER_REG_TVAL:
+		asm volatile("mcr p15, 0, %0, c14, c2, 0" : : "r" (val));
+		break;
+	}
+
+	isb();
+}
+
+static u32 arch_timer_reg_read(int reg)
+{
+	u32 val;
+
+	switch (reg) {
+	case ARCH_TIMER_REG_CTRL:
+		asm volatile("mrc p15, 0, %0, c14, c2, 1" : "=r" (val));
+		break;
+	case ARCH_TIMER_REG_FREQ:
+		asm volatile("mrc p15, 0, %0, c14, c0, 0" : "=r" (val));
+		break;
+	case ARCH_TIMER_REG_TVAL:
+		asm volatile("mrc p15, 0, %0, c14, c2, 0" : "=r" (val));
+		break;
+	default:
+		BUG();
+	}
+
+	return val;
+}
+
+static irqreturn_t arch_timer_handler(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = *(struct clock_event_device **)dev_id;
+	unsigned long ctrl;
+
+	ctrl = arch_timer_reg_read(ARCH_TIMER_REG_CTRL);
+	if (ctrl & ARCH_TIMER_CTRL_IT_STAT) {
+		ctrl |= ARCH_TIMER_CTRL_IT_MASK;
+		arch_timer_reg_write(ARCH_TIMER_REG_CTRL, ctrl);
+		evt->event_handler(evt);
+		return IRQ_HANDLED;
+	}
+
+	return IRQ_NONE;
+}
+
+static void arch_timer_disable(void)
+{
+	unsigned long ctrl;
+
+	ctrl = arch_timer_reg_read(ARCH_TIMER_REG_CTRL);
+	ctrl &= ~ARCH_TIMER_CTRL_ENABLE;
+	arch_timer_reg_write(ARCH_TIMER_REG_CTRL, ctrl);
+}
+
+static void arch_timer_set_mode(enum clock_event_mode mode,
+				struct clock_event_device *clk)
+{
+	switch (mode) {
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+		arch_timer_disable();
+		break;
+	default:
+		break;
+	}
+}
+
+static int arch_timer_set_next_event(unsigned long evt,
+				     struct clock_event_device *unused)
+{
+	unsigned long ctrl;
+
+	ctrl = arch_timer_reg_read(ARCH_TIMER_REG_CTRL);
+	ctrl |= ARCH_TIMER_CTRL_ENABLE;
+	ctrl &= ~ARCH_TIMER_CTRL_IT_MASK;
+
+	arch_timer_reg_write(ARCH_TIMER_REG_TVAL, evt);
+	arch_timer_reg_write(ARCH_TIMER_REG_CTRL, ctrl);
+
+	return 0;
+}
+
+static int __cpuinit arch_timer_setup(struct clock_event_device *clk)
+{
+	/* Be safe... */
+	arch_timer_disable();
+
+	clk->features = CLOCK_EVT_FEAT_ONESHOT;
+	clk->name = "arch_sys_timer";
+	clk->rating = 450;
+	clk->set_mode = arch_timer_set_mode;
+	clk->set_next_event = arch_timer_set_next_event;
+	clk->irq = arch_timer_ppi;
+
+	clockevents_config_and_register(clk, arch_timer_rate,
+					0xf, 0x7fffffff);
+
+	*__this_cpu_ptr(arch_timer_evt) = clk;
+
+	enable_percpu_irq(clk->irq, 0);
+	if (arch_timer_ppi2)
+		enable_percpu_irq(arch_timer_ppi2, 0);
+
+	return 0;
+}
+
+/* Is the optional system timer available? */
+static int local_timer_is_architected(void)
+{
+	return (cpu_architecture() >= CPU_ARCH_ARMv7) &&
+	       ((read_cpuid_ext(CPUID_EXT_PFR1) >> 16) & 0xf) == 1;
+}
+
+static int arch_timer_available(void)
+{
+	unsigned long freq;
+
+	if (!local_timer_is_architected())
+		return -ENXIO;
+
+	if (arch_timer_rate == 0) {
+		arch_timer_reg_write(ARCH_TIMER_REG_CTRL, 0);
+		freq = arch_timer_reg_read(ARCH_TIMER_REG_FREQ);
+
+		/* Check the timer frequency. */
+		if (freq == 0) {
+			pr_warn("Architected timer frequency not available\n");
+			return -EINVAL;
+		}
+
+		arch_timer_rate = freq;
+	}
+
+	pr_info_once("Architected local timer running at %lu.%02luMHz.\n",
+		     arch_timer_rate / 1000000, (arch_timer_rate / 10000) % 100);
+	return 0;
+}
+
+static inline cycle_t arch_counter_get_cntpct(void)
+{
+	u32 cvall, cvalh;
+
+	asm volatile("mrrc p15, 0, %0, %1, c14" : "=r" (cvall), "=r" (cvalh));
+
+	return ((cycle_t) cvalh << 32) | cvall;
+}
+
+static inline cycle_t arch_counter_get_cntvct(void)
+{
+	u32 cvall, cvalh;
+
+	asm volatile("mrrc p15, 1, %0, %1, c14" : "=r" (cvall), "=r" (cvalh));
+
+	return ((cycle_t) cvalh << 32) | cvall;
+}
+
+static u32 notrace arch_counter_get_cntvct32(void)
+{
+	cycle_t cntvct = arch_counter_get_cntvct();
+
+	/*
+	 * The sched_clock infrastructure only knows about counters
+	 * with at most 32bits. Forget about the upper 24 bits for the
+	 * time being...
+	 */
+	return (u32)(cntvct & (u32)~0);
+}
+
+static cycle_t arch_counter_read(struct clocksource *cs)
+{
+	return arch_counter_get_cntpct();
+}
+
+static struct clocksource clocksource_counter = {
+	.name	= "arch_sys_counter",
+	.rating	= 400,
+	.read	= arch_counter_read,
+	.mask	= CLOCKSOURCE_MASK(56),
+	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static void __cpuinit arch_timer_stop(struct clock_event_device *clk)
+{
+	pr_debug("arch_timer_teardown disable IRQ%d cpu #%d\n",
+		 clk->irq, smp_processor_id());
+	disable_percpu_irq(clk->irq);
+	if (arch_timer_ppi2)
+		disable_percpu_irq(arch_timer_ppi2);
+	arch_timer_set_mode(CLOCK_EVT_MODE_UNUSED, clk);
+}
+
+static struct local_timer_ops arch_timer_ops __cpuinitdata = {
+	.setup	= arch_timer_setup,
+	.stop	= arch_timer_stop,
+};
+
+static struct clock_event_device arch_timer_global_evt;
+
+static int __init arch_timer_register(void)
+{
+	int err;
+
+	err = arch_timer_available();
+	if (err)
+		return err;
+
+	arch_timer_evt = alloc_percpu(struct clock_event_device *);
+	if (!arch_timer_evt)
+		return -ENOMEM;
+
+	clocksource_register_hz(&clocksource_counter, arch_timer_rate);
+
+	err = request_percpu_irq(arch_timer_ppi, arch_timer_handler,
+				 "arch_timer", arch_timer_evt);
+	if (err) {
+		pr_err("arch_timer: can't register interrupt %d (%d)\n",
+		       arch_timer_ppi, err);
+		goto out_free;
+	}
+
+	if (arch_timer_ppi2) {
+		err = request_percpu_irq(arch_timer_ppi2, arch_timer_handler,
+					 "arch_timer", arch_timer_evt);
+		if (err) {
+			pr_err("arch_timer: can't register interrupt %d (%d)\n",
+			       arch_timer_ppi2, err);
+			arch_timer_ppi2 = 0;
+			goto out_free_irq;
+		}
+	}
+
+	err = local_timer_register(&arch_timer_ops);
+	if (err) {
+		/*
+		 * We couldn't register as a local timer (could be
+		 * because we're on a UP platform, or because some
+		 * other local timer is already present...). Try as a
+		 * global timer instead.
+		 */
+		arch_timer_global_evt.cpumask = cpumask_of(0);
+		err = arch_timer_setup(&arch_timer_global_evt);
+	}
+
+	if (err)
+		goto out_free_irq;
+
+	return 0;
+
+out_free_irq:
+	free_percpu_irq(arch_timer_ppi, arch_timer_evt);
+	if (arch_timer_ppi2)
+		free_percpu_irq(arch_timer_ppi2, arch_timer_evt);
+
+out_free:
+	free_percpu(arch_timer_evt);
+
+	return err;
+}
+
+static const struct of_device_id arch_timer_of_match[] __initconst = {
+	{ .compatible	= "arm,armv7-timer",	},
+	{},
+};
+
+int __init arch_timer_of_register(void)
+{
+	struct device_node *np;
+	u32 freq;
+
+	np = of_find_matching_node(NULL, arch_timer_of_match);
+	if (!np) {
+		pr_err("arch_timer: can't find DT node\n");
+		return -ENODEV;
+	}
+
+	/* Try to determine the frequency from the device tree or CNTFRQ */
+	if (!of_property_read_u32(np, "clock-frequency", &freq))
+		arch_timer_rate = freq;
+
+	arch_timer_ppi = irq_of_parse_and_map(np, 0);
+	arch_timer_ppi2 = irq_of_parse_and_map(np, 1);
+	pr_info("arch_timer: found %s irqs %d %d\n",
+		np->name, arch_timer_ppi, arch_timer_ppi2);
+
+	return arch_timer_register();
+}
+
+int __init arch_timer_sched_clock_init(void)
+{
+	int err;
+
+	err = arch_timer_available();
+	if (err)
+		return err;
+
+	setup_sched_clock(arch_counter_get_cntvct32, 32, arch_timer_rate);
+	return 0;
+}
diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c
index 632df9a66f8c..25552508c3fd 100644
--- a/arch/arm/kernel/bios32.c
+++ b/arch/arm/kernel/bios32.c
@@ -299,7 +299,6 @@ static inline int pdev_bad_for_parity(struct pci_dev *dev)
  */
 void pcibios_fixup_bus(struct pci_bus *bus)
 {
-	struct pci_sys_data *root = bus->sysdata;
 	struct pci_dev *dev;
 	u16 features = PCI_COMMAND_SERR | PCI_COMMAND_PARITY | PCI_COMMAND_FAST_BACK;
 
@@ -375,16 +374,29 @@ EXPORT_SYMBOL(pcibios_fixup_bus);
 #endif
 
 /*
- * Swizzle the device pin each time we cross a bridge.
- * This might update pin and returns the slot number.
+ * Swizzle the device pin each time we cross a bridge.  If a platform does
+ * not provide a swizzle function, we perform the standard PCI swizzling.
+ *
+ * The default swizzling walks up the bus tree one level at a time, applying
+ * the standard swizzle function at each step, stopping when it finds the PCI
+ * root bus.  This will return the slot number of the bridge device on the
+ * root bus and the interrupt pin on that device which should correspond
+ * with the downstream device interrupt.
+ *
+ * Platforms may override this, in which case the slot and pin returned
+ * depend entirely on the platform code.  However, please note that the
+ * PCI standard swizzle is implemented on plug-in cards and Cardbus based
+ * PCI extenders, so it can not be ignored.
  */
 static u8 __devinit pcibios_swizzle(struct pci_dev *dev, u8 *pin)
 {
 	struct pci_sys_data *sys = dev->sysdata;
-	int slot = 0, oldpin = *pin;
+	int slot, oldpin = *pin;
 
 	if (sys->swizzle)
 		slot = sys->swizzle(dev, pin);
+	else
+		slot = pci_common_swizzle(dev, pin);
 
 	if (debug_pci)
 		printk("PCI: %s swizzling pin %d => pin %d slot %d\n",
@@ -411,7 +423,7 @@ static int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 	return irq;
 }
 
-static void __init pcibios_init_hw(struct hw_pci *hw)
+static void __init pcibios_init_hw(struct hw_pci *hw, struct list_head *head)
 {
 	struct pci_sys_data *sys = NULL;
 	int ret;
@@ -425,7 +437,6 @@ static void __init pcibios_init_hw(struct hw_pci *hw)
 #ifdef CONFIG_PCI_DOMAINS
 		sys->domain  = hw->domain;
 #endif
-		sys->hw      = hw;
 		sys->busnr   = busnr;
 		sys->swizzle = hw->swizzle;
 		sys->map_irq = hw->map_irq;
@@ -441,14 +452,18 @@ static void __init pcibios_init_hw(struct hw_pci *hw)
 					 &iomem_resource, sys->mem_offset);
 			}
 
-			sys->bus = hw->scan(nr, sys);
+			if (hw->scan)
+				sys->bus = hw->scan(nr, sys);
+			else
+				sys->bus = pci_scan_root_bus(NULL, sys->busnr,
+						hw->ops, sys, &sys->resources);
 
 			if (!sys->bus)
 				panic("PCI: unable to scan bus!");
 
 			busnr = sys->bus->subordinate + 1;
 
-			list_add(&sys->node, &hw->buses);
+			list_add(&sys->node, head);
 		} else {
 			kfree(sys);
 			if (ret < 0)
@@ -460,19 +475,18 @@ static void __init pcibios_init_hw(struct hw_pci *hw)
 void __init pci_common_init(struct hw_pci *hw)
 {
 	struct pci_sys_data *sys;
-
-	INIT_LIST_HEAD(&hw->buses);
+	LIST_HEAD(head);
 
 	pci_add_flags(PCI_REASSIGN_ALL_RSRC);
 	if (hw->preinit)
 		hw->preinit();
-	pcibios_init_hw(hw);
+	pcibios_init_hw(hw, &head);
 	if (hw->postinit)
 		hw->postinit();
 
 	pci_fixup_irqs(pcibios_swizzle, pcibios_map_irq);
 
-	list_for_each_entry(sys, &hw->buses, node) {
+	list_for_each_entry(sys, &head, node) {
 		struct pci_bus *bus = sys->bus;
 
 		if (!pci_has_flag(PCI_PROBE_ONLY)) {
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 7fd3ad048da9..437f0c426517 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -556,10 +556,6 @@ call_fpe:
 #endif
 	tst	r0, #0x08000000			@ only CDP/CPRT/LDC/STC have bit 27
 	tstne	r0, #0x04000000			@ bit 26 set on both ARM and Thumb-2
-#if defined(CONFIG_CPU_ARM610) || defined(CONFIG_CPU_ARM710)
-	and	r8, r0, #0x0f000000		@ mask out op-code bits
-	teqne	r8, #0x0f000000			@ SWI (ARM6/7 bug)?
-#endif
 	moveq	pc, lr
 	get_thread_info r10			@ get current thread
 	and	r8, r0, #0x00000f00		@ mask out CP number
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 54ee265dd819..4afed88d250a 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -53,9 +53,13 @@ fast_work_pending:
 work_pending:
 	tst	r1, #_TIF_NEED_RESCHED
 	bne	work_resched
-	tst	r1, #_TIF_SIGPENDING|_TIF_NOTIFY_RESUME
-	beq	no_work_pending
+	/*
+	 * TIF_SIGPENDING or TIF_NOTIFY_RESUME must've been set if we got here
+	 */
+	ldr	r2, [sp, #S_PSR]
 	mov	r0, sp				@ 'regs'
+	tst	r2, #15				@ are we returning to user mode?
+	bne	no_work_pending			@ no?  just leave, then...
 	mov	r2, why				@ 'syscall'
 	tst	r1, #_TIF_SIGPENDING		@ delivering a signal?
 	movne	why, #0				@ prevent further restarts
@@ -335,20 +339,6 @@ ENDPROC(ftrace_stub)
  *-----------------------------------------------------------------------------
  */
 
-	/* If we're optimising for StrongARM the resulting code won't 
-	   run on an ARM7 and we can save a couple of instructions.  
-								--pb */
-#ifdef CONFIG_CPU_ARM710
-#define A710(code...) code
-.Larm710bug:
-	ldmia	sp, {r0 - lr}^			@ Get calling r0 - lr
-	mov	r0, r0
-	add	sp, sp, #S_FRAME_SIZE
-	subs	pc, lr, #4
-#else
-#define A710(code...)
-#endif
-
 	.align	5
 ENTRY(vector_swi)
 	sub	sp, sp, #S_FRAME_SIZE
@@ -379,9 +369,6 @@ ENTRY(vector_swi)
 	ldreq	r10, [lr, #-4]			@ get SWI instruction
 #else
 	ldr	r10, [lr, #-4]			@ get SWI instruction
-  A710(	and	ip, r10, #0x0f000000		@ check for SWI		)
-  A710(	teq	ip, #0x0f000000						)
-  A710(	bne	.Larm710bug						)
 #endif
 #ifdef CONFIG_CPU_ENDIAN_BE8
 	rev	r10, r10			@ little endian instruction
@@ -392,26 +379,15 @@ ENTRY(vector_swi)
 	/*
 	 * Pure EABI user space always put syscall number into scno (r7).
 	 */
-  A710(	ldr	ip, [lr, #-4]			@ get SWI instruction	)
-  A710(	and	ip, ip, #0x0f000000		@ check for SWI		)
-  A710(	teq	ip, #0x0f000000						)
-  A710(	bne	.Larm710bug						)
-
 #elif defined(CONFIG_ARM_THUMB)
-
 	/* Legacy ABI only, possibly thumb mode. */
 	tst	r8, #PSR_T_BIT			@ this is SPSR from save_user_regs
 	addne	scno, r7, #__NR_SYSCALL_BASE	@ put OS number in
 	ldreq	scno, [lr, #-4]
 
 #else
-
 	/* Legacy ABI only. */
 	ldr	scno, [lr, #-4]			@ get SWI instruction
-  A710(	and	ip, scno, #0x0f000000		@ check for SWI		)
-  A710(	teq	ip, #0x0f000000						)
-  A710(	bne	.Larm710bug						)
-
 #endif
 
 #ifdef CONFIG_ALIGNMENT_TRAP
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 3bf0c7f8b043..835898e7d704 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -277,10 +277,6 @@ __create_page_tables:
 	mov	r3, r3, lsl #PMD_ORDER
 
 	add	r0, r4, r3
-	rsb	r3, r3, #0x4000			@ PTRS_PER_PGD*sizeof(long)
-	cmp	r3, #0x0800			@ limit to 512MB
-	movhi	r3, #0x0800
-	add	r6, r0, r3
 	mov	r3, r7, lsr #SECTION_SHIFT
 	ldr	r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags
 	orr	r3, r7, r3, lsl #SECTION_SHIFT
@@ -289,13 +285,10 @@ __create_page_tables:
 #else
 	orr	r3, r3, #PMD_SECT_XN
 #endif
-1:	str	r3, [r0], #4
+	str	r3, [r0], #4
 #ifdef CONFIG_ARM_LPAE
 	str	r7, [r0], #4
 #endif
-	add	r3, r3, #1 << SECTION_SHIFT
-	cmp	r0, r6
-	blo	1b
 
 #else /* CONFIG_DEBUG_ICEDCC || CONFIG_DEBUG_SEMIHOSTING */
 	/* we don't need any serial debugging mappings */
diff --git a/arch/arm/kernel/init_task.c b/arch/arm/kernel/init_task.c
deleted file mode 100644
index e7cbb50dc356..000000000000
--- a/arch/arm/kernel/init_task.c
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- *  linux/arch/arm/kernel/init_task.c
- */
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/fs.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/init_task.h>
-#include <linux/mqueue.h>
-#include <linux/uaccess.h>
-
-#include <asm/pgtable.h>
-
-static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
-static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-/*
- * Initial thread structure.
- *
- * We need to make sure that this is 8192-byte aligned due to the
- * way process stacks are handled. This is done by making sure
- * the linker maps this in the .text segment right after head.S,
- * and making head.S ensure the proper alignment.
- *
- * The things we do for performance..
- */
-union thread_union init_thread_union __init_task_data =
-	{ INIT_THREAD_INFO(init_task) };
-
-/*
- * Initial task structure.
- *
- * All other task structs will be allocated on slabs in fork.c
- */
-struct task_struct init_task = INIT_TASK(init_task);
-
-EXPORT_SYMBOL(init_task);
diff --git a/arch/arm/kernel/insn.c b/arch/arm/kernel/insn.c
index ab312e516546..b760340b7014 100644
--- a/arch/arm/kernel/insn.c
+++ b/arch/arm/kernel/insn.c
@@ -1,3 +1,4 @@
+#include <linux/bug.h>
 #include <linux/kernel.h>
 #include <asm/opcodes.h>
 
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 71ccdbfed662..8349d4e97e2b 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -155,10 +155,10 @@ static bool migrate_one_irq(struct irq_desc *desc)
 	}
 
 	c = irq_data_get_irq_chip(d);
-	if (c->irq_set_affinity)
-		c->irq_set_affinity(d, affinity, true);
-	else
+	if (!c->irq_set_affinity)
 		pr_debug("IRQ%u: unable to set affinity\n", d->irq);
+	else if (c->irq_set_affinity(d, affinity, true) == IRQ_SET_MASK_OK && ret)
+		cpumask_copy(d->affinity, affinity);
 
 	return ret;
 }
diff --git a/arch/arm/kernel/kprobes.c b/arch/arm/kernel/kprobes.c
index ab1869dac97a..4dd41fc9e235 100644
--- a/arch/arm/kernel/kprobes.c
+++ b/arch/arm/kernel/kprobes.c
@@ -152,7 +152,7 @@ int __kprobes __arch_disarm_kprobe(void *p)
 
 void __kprobes arch_disarm_kprobe(struct kprobe *p)
 {
-	stop_machine(__arch_disarm_kprobe, p, &cpu_online_map);
+	stop_machine(__arch_disarm_kprobe, p, cpu_online_mask);
 }
 
 void __kprobes arch_remove_kprobe(struct kprobe *p)
diff --git a/arch/arm/kernel/perf_event_v6.c b/arch/arm/kernel/perf_event_v6.c
index b78af0cc6ef3..ab627a740fa3 100644
--- a/arch/arm/kernel/perf_event_v6.c
+++ b/arch/arm/kernel/perf_event_v6.c
@@ -489,8 +489,6 @@ armv6pmu_handle_irq(int irq_num,
 	 */
 	armv6_pmcr_write(pmcr);
 
-	perf_sample_data_init(&data, 0);
-
 	cpuc = &__get_cpu_var(cpu_hw_events);
 	for (idx = 0; idx < cpu_pmu->num_events; ++idx) {
 		struct perf_event *event = cpuc->events[idx];
@@ -509,7 +507,7 @@ armv6pmu_handle_irq(int irq_num,
 
 		hwc = &event->hw;
 		armpmu_event_update(event, hwc, idx);
-		data.period = event->hw.last_period;
+		perf_sample_data_init(&data, 0, hwc->last_period);
 		if (!armpmu_event_set_period(event, hwc, idx))
 			continue;
 
diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c
index 00755d82e2f2..d3c536068162 100644
--- a/arch/arm/kernel/perf_event_v7.c
+++ b/arch/arm/kernel/perf_event_v7.c
@@ -1077,8 +1077,6 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev)
 	 */
 	regs = get_irq_regs();
 
-	perf_sample_data_init(&data, 0);
-
 	cpuc = &__get_cpu_var(cpu_hw_events);
 	for (idx = 0; idx < cpu_pmu->num_events; ++idx) {
 		struct perf_event *event = cpuc->events[idx];
@@ -1097,7 +1095,7 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev)
 
 		hwc = &event->hw;
 		armpmu_event_update(event, hwc, idx);
-		data.period = event->hw.last_period;
+		perf_sample_data_init(&data, 0, hwc->last_period);
 		if (!armpmu_event_set_period(event, hwc, idx))
 			continue;
 
diff --git a/arch/arm/kernel/perf_event_xscale.c b/arch/arm/kernel/perf_event_xscale.c
index 71a21e6712f5..e34e7254e652 100644
--- a/arch/arm/kernel/perf_event_xscale.c
+++ b/arch/arm/kernel/perf_event_xscale.c
@@ -248,8 +248,6 @@ xscale1pmu_handle_irq(int irq_num, void *dev)
 
 	regs = get_irq_regs();
 
-	perf_sample_data_init(&data, 0);
-
 	cpuc = &__get_cpu_var(cpu_hw_events);
 	for (idx = 0; idx < cpu_pmu->num_events; ++idx) {
 		struct perf_event *event = cpuc->events[idx];
@@ -263,7 +261,7 @@ xscale1pmu_handle_irq(int irq_num, void *dev)
 
 		hwc = &event->hw;
 		armpmu_event_update(event, hwc, idx);
-		data.period = event->hw.last_period;
+		perf_sample_data_init(&data, 0, hwc->last_period);
 		if (!armpmu_event_set_period(event, hwc, idx))
 			continue;
 
@@ -588,8 +586,6 @@ xscale2pmu_handle_irq(int irq_num, void *dev)
 
 	regs = get_irq_regs();
 
-	perf_sample_data_init(&data, 0);
-
 	cpuc = &__get_cpu_var(cpu_hw_events);
 	for (idx = 0; idx < cpu_pmu->num_events; ++idx) {
 		struct perf_event *event = cpuc->events[idx];
@@ -603,7 +599,7 @@ xscale2pmu_handle_irq(int irq_num, void *dev)
 
 		hwc = &event->hw;
 		armpmu_event_update(event, hwc, idx);
-		data.period = event->hw.last_period;
+		perf_sample_data_init(&data, 0, hwc->last_period);
 		if (!armpmu_event_set_period(event, hwc, idx))
 			continue;
 
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 2b7b017a20cd..19c95ea65b2f 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -157,26 +157,6 @@ EXPORT_SYMBOL(pm_power_off);
 void (*arm_pm_restart)(char str, const char *cmd) = null_restart;
 EXPORT_SYMBOL_GPL(arm_pm_restart);
 
-static void do_nothing(void *unused)
-{
-}
-
-/*
- * cpu_idle_wait - Used to ensure that all the CPUs discard old value of
- * pm_idle and update to new pm_idle value. Required while changing pm_idle
- * handler on SMP systems.
- *
- * Caller must have changed pm_idle to the new value before the call. Old
- * pm_idle value will not be used by any CPU after the return of this function.
- */
-void cpu_idle_wait(void)
-{
-	smp_mb();
-	/* kick all the CPUs so that they exit out of pm_idle */
-	smp_call_function(do_nothing, NULL, 1);
-}
-EXPORT_SYMBOL_GPL(cpu_idle_wait);
-
 /*
  * This is our default idle handler.
  */
diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c
index 45956c9d0ef0..5700a7ae7f0b 100644
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@@ -24,6 +24,8 @@
 #include <linux/hw_breakpoint.h>
 #include <linux/regset.h>
 #include <linux/audit.h>
+#include <linux/tracehook.h>
+#include <linux/unistd.h>
 
 #include <asm/pgtable.h>
 #include <asm/traps.h>
@@ -256,7 +258,7 @@ static int ptrace_read_user(struct task_struct *tsk, unsigned long off,
 {
 	unsigned long tmp;
 
-	if (off & 3 || off >= sizeof(struct user))
+	if (off & 3)
 		return -EIO;
 
 	tmp = 0;
@@ -268,6 +270,8 @@ static int ptrace_read_user(struct task_struct *tsk, unsigned long off,
 		tmp = tsk->mm->end_code;
 	else if (off < sizeof(struct pt_regs))
 		tmp = get_user_reg(tsk, off >> 2);
+	else if (off >= sizeof(struct user))
+		return -EIO;
 
 	return put_user(tmp, ret);
 }
@@ -904,49 +908,35 @@ long arch_ptrace(struct task_struct *child, long request,
 	return ret;
 }
 
-#ifdef __ARMEB__
-#define AUDIT_ARCH_NR AUDIT_ARCH_ARMEB
-#else
-#define AUDIT_ARCH_NR AUDIT_ARCH_ARM
-#endif
-
 asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno)
 {
 	unsigned long ip;
 
-	/*
-	 * Save IP.  IP is used to denote syscall entry/exit:
-	 *  IP = 0 -> entry, = 1 -> exit
-	 */
-	ip = regs->ARM_ip;
-	regs->ARM_ip = why;
-
-	if (!ip)
+	if (why)
 		audit_syscall_exit(regs);
 	else
-		audit_syscall_entry(AUDIT_ARCH_NR, scno, regs->ARM_r0,
+		audit_syscall_entry(AUDIT_ARCH_ARM, scno, regs->ARM_r0,
 				    regs->ARM_r1, regs->ARM_r2, regs->ARM_r3);
 
+	if (why == 0 && test_and_clear_thread_flag(TIF_SYSCALL_RESTARTSYS))
+		scno = __NR_restart_syscall - __NR_SYSCALL_BASE;
 	if (!test_thread_flag(TIF_SYSCALL_TRACE))
 		return scno;
-	if (!(current->ptrace & PT_PTRACED))
-		return scno;
 
 	current_thread_info()->syscall = scno;
 
-	/* the 0x80 provides a way for the tracing parent to distinguish
-	   between a syscall stop and SIGTRAP delivery */
-	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
-				 ? 0x80 : 0));
 	/*
-	 * this isn't the same as continuing with a signal, but it will do
-	 * for normal use.  strace only continues with a signal if the
-	 * stopping signal is not SIGTRAP.  -brl
+	 * IP is used to denote syscall entry/exit:
+	 * IP = 0 -> entry, =1 -> exit
 	 */
-	if (current->exit_code) {
-		send_sig(current->exit_code, current, 1);
-		current->exit_code = 0;
-	}
+	ip = regs->ARM_ip;
+	regs->ARM_ip = why;
+
+	if (why)
+		tracehook_report_syscall_exit(regs, 0);
+	else if (tracehook_report_syscall_entry(regs))
+		current_thread_info()->syscall = -1;
+
 	regs->ARM_ip = ip;
 
 	return current_thread_info()->syscall;
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index b91411371ae1..e15d83bb4ea3 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -81,6 +81,7 @@ __setup("fpe=", fpe_setup);
 extern void paging_init(struct machine_desc *desc);
 extern void sanity_check_meminfo(void);
 extern void reboot_setup(char *str);
+extern void setup_dma_zone(struct machine_desc *desc);
 
 unsigned int processor_id;
 EXPORT_SYMBOL(processor_id);
@@ -523,7 +524,21 @@ int __init arm_add_memory(phys_addr_t start, unsigned long size)
 	 */
 	size -= start & ~PAGE_MASK;
 	bank->start = PAGE_ALIGN(start);
-	bank->size  = size & PAGE_MASK;
+
+#ifndef CONFIG_LPAE
+	if (bank->start + size < bank->start) {
+		printk(KERN_CRIT "Truncating memory at 0x%08llx to fit in "
+			"32-bit physical address space\n", (long long)start);
+		/*
+		 * To ensure bank->start + bank->size is representable in
+		 * 32 bits, we use ULONG_MAX as the upper limit rather than 4GB.
+		 * This means we lose a page after masking.
+		 */
+		size = ULONG_MAX - bank->start;
+	}
+#endif
+
+	bank->size = size & PAGE_MASK;
 
 	/*
 	 * Check whether this memory region has non-zero size or
@@ -786,6 +801,14 @@ static int __init customize_machine(void)
 }
 arch_initcall(customize_machine);
 
+static int __init init_machine_late(void)
+{
+	if (machine_desc->init_late)
+		machine_desc->init_late();
+	return 0;
+}
+late_initcall(init_machine_late);
+
 #ifdef CONFIG_KEXEC
 static inline unsigned long long get_total_mem(void)
 {
@@ -925,12 +948,8 @@ void __init setup_arch(char **cmdline_p)
 	machine_desc = mdesc;
 	machine_name = mdesc->name;
 
-#ifdef CONFIG_ZONE_DMA
-	if (mdesc->dma_zone_size) {
-		extern unsigned long arm_dma_zone_size;
-		arm_dma_zone_size = mdesc->dma_zone_size;
-	}
-#endif
+	setup_dma_zone(mdesc);
+
 	if (mdesc->restart_mode)
 		reboot_setup(&mdesc->restart_mode);
 
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index 7cb532fc8aa4..fd2392a17ac1 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -22,14 +22,11 @@
 
 #include "signal.h"
 
-#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
-
 /*
  * For ARM syscalls, we encode the syscall number into the instruction.
  */
 #define SWI_SYS_SIGRETURN	(0xef000000|(__NR_sigreturn)|(__NR_OABI_SYSCALL_BASE))
 #define SWI_SYS_RT_SIGRETURN	(0xef000000|(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE))
-#define SWI_SYS_RESTART		(0xef000000|__NR_restart_syscall|__NR_OABI_SYSCALL_BASE)
 
 /*
  * With EABI, the syscall number has to be loaded into r7.
@@ -50,34 +47,13 @@ const unsigned long sigreturn_codes[7] = {
 };
 
 /*
- * Either we support OABI only, or we have EABI with the OABI
- * compat layer enabled.  In the later case we don't know if
- * user space is EABI or not, and if not we must not clobber r7.
- * Always using the OABI syscall solves that issue and works for
- * all those cases.
- */
-const unsigned long syscall_restart_code[2] = {
-	SWI_SYS_RESTART,	/* swi	__NR_restart_syscall */
-	0xe49df004,		/* ldr	pc, [sp], #4 */
-};
-
-/*
  * atomically swap in the new signal mask, and wait for a signal.
  */
 asmlinkage int sys_sigsuspend(int restart, unsigned long oldmask, old_sigset_t mask)
 {
 	sigset_t blocked;
-
-	current->saved_sigmask = current->blocked;
-
-	mask &= _BLOCKABLE;
 	siginitset(&blocked, mask);
-	set_current_blocked(&blocked);
-
-	current->state = TASK_INTERRUPTIBLE;
-	schedule();
-	set_restore_sigmask();
-	return -ERESTARTNOHAND;
+	return sigsuspend(&blocked);
 }
 
 asmlinkage int 
@@ -91,10 +67,10 @@ sys_sigaction(int sig, const struct old_sigaction __user *act,
 		old_sigset_t mask;
 		if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
 		    __get_user(new_ka.sa.sa_handler, &act->sa_handler) ||
-		    __get_user(new_ka.sa.sa_restorer, &act->sa_restorer))
+		    __get_user(new_ka.sa.sa_restorer, &act->sa_restorer) ||
+		    __get_user(new_ka.sa.sa_flags, &act->sa_flags) ||
+		    __get_user(mask, &act->sa_mask))
 			return -EFAULT;
-		__get_user(new_ka.sa.sa_flags, &act->sa_flags);
-		__get_user(mask, &act->sa_mask);
 		siginitset(&new_ka.sa.sa_mask, mask);
 	}
 
@@ -103,10 +79,10 @@ sys_sigaction(int sig, const struct old_sigaction __user *act,
 	if (!ret && oact) {
 		if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) ||
 		    __put_user(old_ka.sa.sa_handler, &oact->sa_handler) ||
-		    __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer))
+		    __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer) ||
+		    __put_user(old_ka.sa.sa_flags, &oact->sa_flags) ||
+		    __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask))
 			return -EFAULT;
-		__put_user(old_ka.sa.sa_flags, &oact->sa_flags);
-		__put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask);
 	}
 
 	return ret;
@@ -180,44 +156,23 @@ static int restore_iwmmxt_context(struct iwmmxt_sigframe *frame)
 
 static int preserve_vfp_context(struct vfp_sigframe __user *frame)
 {
-	struct thread_info *thread = current_thread_info();
-	struct vfp_hard_struct *h = &thread->vfpstate.hard;
 	const unsigned long magic = VFP_MAGIC;
 	const unsigned long size = VFP_STORAGE_SIZE;
 	int err = 0;
 
-	vfp_sync_hwstate(thread);
 	__put_user_error(magic, &frame->magic, err);
 	__put_user_error(size, &frame->size, err);
 
-	/*
-	 * Copy the floating point registers. There can be unused
-	 * registers see asm/hwcap.h for details.
-	 */
-	err |= __copy_to_user(&frame->ufp.fpregs, &h->fpregs,
-			      sizeof(h->fpregs));
-	/*
-	 * Copy the status and control register.
-	 */
-	__put_user_error(h->fpscr, &frame->ufp.fpscr, err);
-
-	/*
-	 * Copy the exception registers.
-	 */
-	__put_user_error(h->fpexc, &frame->ufp_exc.fpexc, err);
-	__put_user_error(h->fpinst, &frame->ufp_exc.fpinst, err);
-	__put_user_error(h->fpinst2, &frame->ufp_exc.fpinst2, err);
+	if (err)
+		return -EFAULT;
 
-	return err ? -EFAULT : 0;
+	return vfp_preserve_user_clear_hwstate(&frame->ufp, &frame->ufp_exc);
 }
 
 static int restore_vfp_context(struct vfp_sigframe __user *frame)
 {
-	struct thread_info *thread = current_thread_info();
-	struct vfp_hard_struct *h = &thread->vfpstate.hard;
 	unsigned long magic;
 	unsigned long size;
-	unsigned long fpexc;
 	int err = 0;
 
 	__get_user_error(magic, &frame->magic, err);
@@ -228,33 +183,7 @@ static int restore_vfp_context(struct vfp_sigframe __user *frame)
 	if (magic != VFP_MAGIC || size != VFP_STORAGE_SIZE)
 		return -EINVAL;
 
-	vfp_flush_hwstate(thread);
-
-	/*
-	 * Copy the floating point registers. There can be unused
-	 * registers see asm/hwcap.h for details.
-	 */
-	err |= __copy_from_user(&h->fpregs, &frame->ufp.fpregs,
-				sizeof(h->fpregs));
-	/*
-	 * Copy the status and control register.
-	 */
-	__get_user_error(h->fpscr, &frame->ufp.fpscr, err);
-
-	/*
-	 * Sanitise and restore the exception registers.
-	 */
-	__get_user_error(fpexc, &frame->ufp_exc.fpexc, err);
-	/* Ensure the VFP is enabled. */
-	fpexc |= FPEXC_EN;
-	/* Ensure FPINST2 is invalid and the exception flag is cleared. */
-	fpexc &= ~(FPEXC_EX | FPEXC_FP2V);
-	h->fpexc = fpexc;
-
-	__get_user_error(h->fpinst, &frame->ufp_exc.fpinst, err);
-	__get_user_error(h->fpinst2, &frame->ufp_exc.fpinst2, err);
-
-	return err ? -EFAULT : 0;
+	return vfp_restore_user_hwstate(&frame->ufp, &frame->ufp_exc);
 }
 
 #endif
@@ -279,10 +208,8 @@ static int restore_sigframe(struct pt_regs *regs, struct sigframe __user *sf)
 	int err;
 
 	err = __copy_from_user(&set, &sf->uc.uc_sigmask, sizeof(set));
-	if (err == 0) {
-		sigdelsetmask(&set, ~_BLOCKABLE);
+	if (err == 0)
 		set_current_blocked(&set);
-	}
 
 	__get_user_error(regs->ARM_r0, &sf->uc.uc_mcontext.arm_r0, err);
 	__get_user_error(regs->ARM_r1, &sf->uc.uc_mcontext.arm_r1, err);
@@ -597,13 +524,13 @@ setup_rt_frame(int usig, struct k_sigaction *ka, siginfo_t *info,
 /*
  * OK, we're invoking a handler
  */	
-static int
+static void
 handle_signal(unsigned long sig, struct k_sigaction *ka,
-	      siginfo_t *info, sigset_t *oldset,
-	      struct pt_regs * regs)
+	      siginfo_t *info, struct pt_regs *regs)
 {
 	struct thread_info *thread = current_thread_info();
 	struct task_struct *tsk = current;
+	sigset_t *oldset = sigmask_to_save();
 	int usig = sig;
 	int ret;
 
@@ -628,15 +555,9 @@ handle_signal(unsigned long sig, struct k_sigaction *ka,
 
 	if (ret != 0) {
 		force_sigsegv(sig, tsk);
-		return ret;
+		return;
 	}
-
-	/*
-	 * Block the signal if we were successful.
-	 */
-	block_sigmask(ka, sig);
-
-	return 0;
+	signal_delivered(sig, info, ka, regs, 0);
 }
 
 /*
@@ -656,15 +577,6 @@ static void do_signal(struct pt_regs *regs, int syscall)
 	int signr;
 
 	/*
-	 * We want the common case to go fast, which
-	 * is why we may in certain cases get here from
-	 * kernel mode. Just return without doing anything
-	 * if so.
-	 */
-	if (!user_mode(regs))
-		return;
-
-	/*
 	 * If we were from a system call, check for system call restarting...
 	 */
 	if (syscall) {
@@ -680,58 +592,39 @@ static void do_signal(struct pt_regs *regs, int syscall)
 		case -ERESTARTNOHAND:
 		case -ERESTARTSYS:
 		case -ERESTARTNOINTR:
+		case -ERESTART_RESTARTBLOCK:
 			regs->ARM_r0 = regs->ARM_ORIG_r0;
 			regs->ARM_pc = restart_addr;
 			break;
-		case -ERESTART_RESTARTBLOCK:
-			regs->ARM_r0 = -EINTR;
-			break;
 		}
 	}
 
-	if (try_to_freeze())
-		goto no_signal;
-
 	/*
 	 * Get the signal to deliver.  When running under ptrace, at this
 	 * point the debugger may change all our registers ...
 	 */
 	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
 	if (signr > 0) {
-		sigset_t *oldset;
-
 		/*
 		 * Depending on the signal settings we may need to revert the
 		 * decision to restart the system call.  But skip this if a
 		 * debugger has chosen to restart at a different PC.
 		 */
 		if (regs->ARM_pc == restart_addr) {
-			if (retval == -ERESTARTNOHAND
+			if (retval == -ERESTARTNOHAND ||
+			    retval == -ERESTART_RESTARTBLOCK
 			    || (retval == -ERESTARTSYS
 				&& !(ka.sa.sa_flags & SA_RESTART))) {
 				regs->ARM_r0 = -EINTR;
 				regs->ARM_pc = continue_addr;
 			}
+			clear_thread_flag(TIF_SYSCALL_RESTARTSYS);
 		}
 
-		if (test_thread_flag(TIF_RESTORE_SIGMASK))
-			oldset = &current->saved_sigmask;
-		else
-			oldset = &current->blocked;
-		if (handle_signal(signr, &ka, &info, oldset, regs) == 0) {
-			/*
-			 * A signal was successfully delivered; the saved
-			 * sigmask will have been stored in the signal frame,
-			 * and will be restored by sigreturn, so we can simply
-			 * clear the TIF_RESTORE_SIGMASK flag.
-			 */
-			if (test_thread_flag(TIF_RESTORE_SIGMASK))
-				clear_thread_flag(TIF_RESTORE_SIGMASK);
-		}
+		handle_signal(signr, &ka, &info, regs);
 		return;
 	}
 
- no_signal:
 	if (syscall) {
 		/*
 		 * Handle restarting a different system call.  As above,
@@ -739,38 +632,11 @@ static void do_signal(struct pt_regs *regs, int syscall)
 		 * ignore the restart.
 		 */
 		if (retval == -ERESTART_RESTARTBLOCK
-		    && regs->ARM_pc == continue_addr) {
-			if (thumb_mode(regs)) {
-				regs->ARM_r7 = __NR_restart_syscall - __NR_SYSCALL_BASE;
-				regs->ARM_pc -= 2;
-			} else {
-#if defined(CONFIG_AEABI) && !defined(CONFIG_OABI_COMPAT)
-				regs->ARM_r7 = __NR_restart_syscall;
-				regs->ARM_pc -= 4;
-#else
-				u32 __user *usp;
-
-				regs->ARM_sp -= 4;
-				usp = (u32 __user *)regs->ARM_sp;
-
-				if (put_user(regs->ARM_pc, usp) == 0) {
-					regs->ARM_pc = KERN_RESTART_CODE;
-				} else {
-					regs->ARM_sp += 4;
-					force_sigsegv(0, current);
-				}
-#endif
-			}
-		}
-
-		/* If there's no signal to deliver, we just put the saved sigmask
-		 * back.
-		 */
-		if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
-			clear_thread_flag(TIF_RESTORE_SIGMASK);
-			sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
-		}
+		    && regs->ARM_pc == restart_addr)
+			set_thread_flag(TIF_SYSCALL_RESTARTSYS);
 	}
+
+	restore_saved_sigmask();
 }
 
 asmlinkage void
@@ -782,7 +648,5 @@ do_notify_resume(struct pt_regs *regs, unsigned int thread_flags, int syscall)
 	if (thread_flags & _TIF_NOTIFY_RESUME) {
 		clear_thread_flag(TIF_NOTIFY_RESUME);
 		tracehook_notify_resume(regs);
-		if (current->replacement_session_keyring)
-			key_replace_session_keyring();
 	}
 }
diff --git a/arch/arm/kernel/signal.h b/arch/arm/kernel/signal.h
index 6fcfe8398aa4..5ff067b7c752 100644
--- a/arch/arm/kernel/signal.h
+++ b/arch/arm/kernel/signal.h
@@ -8,7 +8,5 @@
  * published by the Free Software Foundation.
  */
 #define KERN_SIGRETURN_CODE	(CONFIG_VECTORS_BASE + 0x00000500)
-#define KERN_RESTART_CODE	(KERN_SIGRETURN_CODE + sizeof(sigreturn_codes))
 
 extern const unsigned long sigreturn_codes[7];
-extern const unsigned long syscall_restart_code[2];
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 2cee7d1eb958..2c7217d971db 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -60,32 +60,11 @@ enum ipi_msg_type {
 
 static DECLARE_COMPLETION(cpu_running);
 
-int __cpuinit __cpu_up(unsigned int cpu)
+int __cpuinit __cpu_up(unsigned int cpu, struct task_struct *idle)
 {
-	struct cpuinfo_arm *ci = &per_cpu(cpu_data, cpu);
-	struct task_struct *idle = ci->idle;
 	int ret;
 
 	/*
-	 * Spawn a new process manually, if not already done.
-	 * Grab a pointer to its task struct so we can mess with it
-	 */
-	if (!idle) {
-		idle = fork_idle(cpu);
-		if (IS_ERR(idle)) {
-			printk(KERN_ERR "CPU%u: fork() failed\n", cpu);
-			return PTR_ERR(idle);
-		}
-		ci->idle = idle;
-	} else {
-		/*
-		 * Since this idle thread is being re-used, call
-		 * init_idle() to reinitialize the thread structure.
-		 */
-		init_idle(idle, cpu);
-	}
-
-	/*
 	 * We need to tell the secondary core where to find
 	 * its stack and the page tables.
 	 */
@@ -130,7 +109,6 @@ static void percpu_timer_stop(void);
 int __cpu_disable(void)
 {
 	unsigned int cpu = smp_processor_id();
-	struct task_struct *p;
 	int ret;
 
 	ret = platform_cpu_disable(cpu);
@@ -160,12 +138,7 @@ int __cpu_disable(void)
 	flush_cache_all();
 	local_flush_tlb_all();
 
-	read_lock(&tasklist_lock);
-	for_each_process(p) {
-		if (p->mm)
-			cpumask_clear_cpu(cpu, mm_cpumask(p->mm));
-	}
-	read_unlock(&tasklist_lock);
+	clear_tasks_mm_cpumask(cpu);
 
 	return 0;
 }
@@ -251,8 +224,6 @@ asmlinkage void __cpuinit secondary_start_kernel(void)
 	struct mm_struct *mm = &init_mm;
 	unsigned int cpu = smp_processor_id();
 
-	printk("CPU%u: Booted secondary processor\n", cpu);
-
 	/*
 	 * All kernel threads share the same mm context; grab a
 	 * reference and switch to it.
@@ -264,6 +235,8 @@ asmlinkage void __cpuinit secondary_start_kernel(void)
 	enter_lazy_tlb(mm, current);
 	local_flush_tlb_all();
 
+	printk("CPU%u: Booted secondary processor\n", cpu);
+
 	cpu_init();
 	preempt_disable();
 	trace_hardirqs_off();
@@ -318,9 +291,6 @@ void __init smp_cpus_done(unsigned int max_cpus)
 
 void __init smp_prepare_boot_cpu(void)
 {
-	unsigned int cpu = smp_processor_id();
-
-	per_cpu(cpu_data, cpu).idle = current;
 }
 
 void __init smp_prepare_cpus(unsigned int max_cpus)
@@ -349,7 +319,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 		 * re-initialize the map in platform_smp_prepare_cpus() if
 		 * present != possible (e.g. physical hotplug).
 		 */
-		init_cpu_present(&cpu_possible_map);
+		init_cpu_present(cpu_possible_mask);
 
 		/*
 		 * Initialise the SCU if there are more than one CPU
@@ -454,6 +424,9 @@ static struct local_timer_ops *lt_ops;
 #ifdef CONFIG_LOCAL_TIMERS
 int local_timer_register(struct local_timer_ops *ops)
 {
+	if (!is_smp() || !setup_max_cpus)
+		return -ENXIO;
+
 	if (lt_ops)
 		return -EBUSY;
 
@@ -510,10 +483,6 @@ static void ipi_cpu_stop(unsigned int cpu)
 	local_fiq_disable();
 	local_irq_disable();
 
-#ifdef CONFIG_HOTPLUG_CPU
-	platform_cpu_kill(cpu);
-#endif
-
 	while (1)
 		cpu_relax();
 }
@@ -576,16 +545,25 @@ void smp_send_reschedule(int cpu)
 	smp_cross_call(cpumask_of(cpu), IPI_RESCHEDULE);
 }
 
+#ifdef CONFIG_HOTPLUG_CPU
+static void smp_kill_cpus(cpumask_t *mask)
+{
+	unsigned int cpu;
+	for_each_cpu(cpu, mask)
+		platform_cpu_kill(cpu);
+}
+#else
+static void smp_kill_cpus(cpumask_t *mask) { }
+#endif
+
 void smp_send_stop(void)
 {
 	unsigned long timeout;
+	struct cpumask mask;
 
-	if (num_online_cpus() > 1) {
-		cpumask_t mask = cpu_online_map;
-		cpu_clear(smp_processor_id(), mask);
-
-		smp_cross_call(&mask, IPI_CPU_STOP);
-	}
+	cpumask_copy(&mask, cpu_online_mask);
+	cpumask_clear_cpu(smp_processor_id(), &mask);
+	smp_cross_call(&mask, IPI_CPU_STOP);
 
 	/* Wait up to one second for other CPUs to stop */
 	timeout = USEC_PER_SEC;
@@ -594,6 +572,8 @@ void smp_send_stop(void)
 
 	if (num_online_cpus() > 1)
 		pr_warning("SMP: failed to stop secondary CPUs\n");
+
+	smp_kill_cpus(&mask);
 }
 
 /*
diff --git a/arch/arm/kernel/smp_scu.c b/arch/arm/kernel/smp_scu.c
index 8f5dd7963356..b9f015e843d8 100644
--- a/arch/arm/kernel/smp_scu.c
+++ b/arch/arm/kernel/smp_scu.c
@@ -11,6 +11,7 @@
 #include <linux/init.h>
 #include <linux/io.h>
 
+#include <asm/smp_plat.h>
 #include <asm/smp_scu.h>
 #include <asm/cacheflush.h>
 #include <asm/cputype.h>
@@ -74,7 +75,7 @@ void scu_enable(void __iomem *scu_base)
 int scu_power_mode(void __iomem *scu_base, unsigned int mode)
 {
 	unsigned int val;
-	int cpu = smp_processor_id();
+	int cpu = cpu_logical_map(smp_processor_id());
 
 	if (mode > 3 || mode == 1 || cpu > 3)
 		return -EINVAL;
diff --git a/arch/arm/kernel/sys_arm.c b/arch/arm/kernel/sys_arm.c
index d2b177905cdb..76cbb055dd05 100644
--- a/arch/arm/kernel/sys_arm.c
+++ b/arch/arm/kernel/sys_arm.c
@@ -115,7 +115,7 @@ int kernel_execve(const char *filename,
 		  "Ir" (THREAD_START_SP - sizeof(regs)),
 		  "r" (&regs),
 		  "Ir" (sizeof(regs))
-		: "r0", "r1", "r2", "r3", "ip", "lr", "memory");
+		: "r0", "r1", "r2", "r3", "r8", "r9", "ip", "lr", "memory");
 
  out:
 	return ret;
diff --git a/arch/arm/kernel/sys_oabi-compat.c b/arch/arm/kernel/sys_oabi-compat.c
index af0aaebf4de6..3e94811690ce 100644
--- a/arch/arm/kernel/sys_oabi-compat.c
+++ b/arch/arm/kernel/sys_oabi-compat.c
@@ -124,8 +124,8 @@ static long cp_oldabi_stat64(struct kstat *stat,
 	tmp.__st_ino = stat->ino;
 	tmp.st_mode = stat->mode;
 	tmp.st_nlink = stat->nlink;
-	tmp.st_uid = stat->uid;
-	tmp.st_gid = stat->gid;
+	tmp.st_uid = from_kuid_munged(current_user_ns(), stat->uid);
+	tmp.st_gid = from_kgid_munged(current_user_ns(), stat->gid);
 	tmp.st_rdev = huge_encode_dev(stat->rdev);
 	tmp.st_size = stat->size;
 	tmp.st_blocks = stat->blocks;
diff --git a/arch/arm/kernel/thumbee.c b/arch/arm/kernel/thumbee.c
index aab899764053..7b8403b76666 100644
--- a/arch/arm/kernel/thumbee.c
+++ b/arch/arm/kernel/thumbee.c
@@ -20,6 +20,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 
+#include <asm/cputype.h>
 #include <asm/system_info.h>
 #include <asm/thread_notify.h>
 
@@ -67,8 +68,7 @@ static int __init thumbee_init(void)
 	if (cpu_arch < CPU_ARCH_ARMv7)
 		return 0;
 
-	/* processor feature register 0 */
-	asm("mrc	p15, 0, %0, c0, c1, 0\n" : "=r" (pfr0));
+	pfr0 = read_cpuid_ext(CPUID_EXT_PFR0);
 	if ((pfr0 & 0x0000f000) != 0x00001000)
 		return 0;
 
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index fe31b22f18fd..af2afb019672 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -110,6 +110,42 @@ void timer_tick(void)
 }
 #endif
 
+static void dummy_clock_access(struct timespec *ts)
+{
+	ts->tv_sec = 0;
+	ts->tv_nsec = 0;
+}
+
+static clock_access_fn __read_persistent_clock = dummy_clock_access;
+static clock_access_fn __read_boot_clock = dummy_clock_access;;
+
+void read_persistent_clock(struct timespec *ts)
+{
+	__read_persistent_clock(ts);
+}
+
+void read_boot_clock(struct timespec *ts)
+{
+	__read_boot_clock(ts);
+}
+
+int __init register_persistent_clock(clock_access_fn read_boot,
+				     clock_access_fn read_persistent)
+{
+	/* Only allow the clockaccess functions to be registered once */
+	if (__read_persistent_clock == dummy_clock_access &&
+	    __read_boot_clock == dummy_clock_access) {
+		if (read_boot)
+			__read_boot_clock = read_boot;
+		if (read_persistent)
+			__read_persistent_clock = read_persistent;
+
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
 #if defined(CONFIG_PM) && !defined(CONFIG_GENERIC_CLOCKEVENTS)
 static int timer_suspend(void)
 {
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 778454750a6c..4928d89758f4 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -479,14 +479,14 @@ static int bad_syscall(int n, struct pt_regs *regs)
 	return regs->ARM_r0;
 }
 
-static inline void
+static inline int
 do_cache_op(unsigned long start, unsigned long end, int flags)
 {
 	struct mm_struct *mm = current->active_mm;
 	struct vm_area_struct *vma;
 
 	if (end < start || flags)
-		return;
+		return -EINVAL;
 
 	down_read(&mm->mmap_sem);
 	vma = find_vma(mm, start);
@@ -496,9 +496,11 @@ do_cache_op(unsigned long start, unsigned long end, int flags)
 		if (end > vma->vm_end)
 			end = vma->vm_end;
 
-		flush_cache_user_range(vma, start, end);
+		up_read(&mm->mmap_sem);
+		return flush_cache_user_range(start, end);
 	}
 	up_read(&mm->mmap_sem);
+	return -EINVAL;
 }
 
 /*
@@ -544,8 +546,7 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs)
 	 * the specified region).
 	 */
 	case NR(cacheflush):
-		do_cache_op(regs->ARM_r0, regs->ARM_r1, regs->ARM_r2);
-		return 0;
+		return do_cache_op(regs->ARM_r0, regs->ARM_r1, regs->ARM_r2);
 
 	case NR(usr26):
 		if (!(elf_hwcap & HWCAP_26BIT))
@@ -819,8 +820,6 @@ void __init early_trap_init(void *vectors_base)
 	 */
 	memcpy((void *)(vectors + KERN_SIGRETURN_CODE - CONFIG_VECTORS_BASE),
 	       sigreturn_codes, sizeof(sigreturn_codes));
-	memcpy((void *)(vectors + KERN_RESTART_CODE - CONFIG_VECTORS_BASE),
-	       syscall_restart_code, sizeof(syscall_restart_code));
 
 	flush_icache_range(vectors, vectors + PAGE_SIZE);
 	modify_domain(DOMAIN_USER, DOMAIN_CLIENT);
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index 0ade0acc1ed9..992769ae2599 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -17,30 +17,13 @@ lib-y		:= backtrace.o changebit.o csumipv6.o csumpartial.o   \
 		   call_with_stack.o
 
 mmu-y	:= clear_user.o copy_page.o getuser.o putuser.o
-
-# the code in uaccess.S is not preemption safe and
-# probably faster on ARMv3 only
-ifeq ($(CONFIG_PREEMPT),y)
-  mmu-y	+= copy_from_user.o copy_to_user.o
-else
-ifneq ($(CONFIG_CPU_32v3),y)
-  mmu-y	+= copy_from_user.o copy_to_user.o
-else
-  mmu-y	+= uaccess.o
-endif
-endif
+mmu-y	+= copy_from_user.o copy_to_user.o
 
 # using lib_ here won't override already available weak symbols
 obj-$(CONFIG_UACCESS_WITH_MEMCPY) += uaccess_with_memcpy.o
 
-lib-$(CONFIG_MMU) += $(mmu-y)
-
-ifeq ($(CONFIG_CPU_32v3),y)
-  lib-y	+= io-readsw-armv3.o io-writesw-armv3.o
-else
-  lib-y	+= io-readsw-armv4.o io-writesw-armv4.o
-endif
-
+lib-$(CONFIG_MMU)		+= $(mmu-y)
+lib-y				+= io-readsw-armv4.o io-writesw-armv4.o
 lib-$(CONFIG_ARCH_RPC)		+= ecard.o io-acorn.o floppydma.o
 lib-$(CONFIG_ARCH_SHARK)	+= io-shark.o
 
diff --git a/arch/arm/lib/io-readsw-armv3.S b/arch/arm/lib/io-readsw-armv3.S
deleted file mode 100644
index 88487c8c4f23..000000000000
--- a/arch/arm/lib/io-readsw-armv3.S
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- *  linux/arch/arm/lib/io-readsw-armv3.S
- *
- *  Copyright (C) 1995-2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-.Linsw_bad_alignment:
-		adr	r0, .Linsw_bad_align_msg
-		mov	r2, lr
-		b	panic
-.Linsw_bad_align_msg:
-		.asciz	"insw: bad buffer alignment (0x%p, lr=0x%08lX)\n"
-		.align
-
-.Linsw_align:	tst	r1, #1
-		bne	.Linsw_bad_alignment
-
-		ldr	r3, [r0]
-		strb	r3, [r1], #1
-		mov	r3, r3, lsr #8
-		strb	r3, [r1], #1
-
-		subs	r2, r2, #1
-		moveq	pc, lr
-
-ENTRY(__raw_readsw)
-		teq	r2, #0		@ do we have to check for the zero len?
-		moveq	pc, lr
-		tst	r1, #3
-		bne	.Linsw_align
-
-.Linsw_aligned:	mov	ip, #0xff
-		orr	ip, ip, ip, lsl #8
-		stmfd	sp!, {r4, r5, r6, lr}
-
-		subs	r2, r2, #8
-		bmi	.Lno_insw_8
-
-.Linsw_8_lp:	ldr	r3, [r0]
-		and	r3, r3, ip
-		ldr	r4, [r0]
-		orr	r3, r3, r4, lsl #16
-
-		ldr	r4, [r0]
-		and	r4, r4, ip
-		ldr	r5, [r0]
-		orr	r4, r4, r5, lsl #16
-
-		ldr	r5, [r0]
-		and	r5, r5, ip
-		ldr	r6, [r0]
-		orr	r5, r5, r6, lsl #16
-
-		ldr	r6, [r0]
-		and	r6, r6, ip
-		ldr	lr, [r0]
-		orr	r6, r6, lr, lsl #16
-
-		stmia	r1!, {r3 - r6}
-
-		subs	r2, r2, #8
-		bpl	.Linsw_8_lp
-
-		tst	r2, #7
-		ldmeqfd	sp!, {r4, r5, r6, pc}
-
-.Lno_insw_8:	tst	r2, #4
-		beq	.Lno_insw_4
-
-		ldr	r3, [r0]
-		and	r3, r3, ip
-		ldr	r4, [r0]
-		orr	r3, r3, r4, lsl #16
-
-		ldr	r4, [r0]
-		and	r4, r4, ip
-		ldr	r5, [r0]
-		orr	r4, r4, r5, lsl #16
-
-		stmia	r1!, {r3, r4}
-
-.Lno_insw_4:	tst	r2, #2
-		beq	.Lno_insw_2
-
-		ldr	r3, [r0]
-		and	r3, r3, ip
-		ldr	r4, [r0]
-		orr	r3, r3, r4, lsl #16
-
-		str	r3, [r1], #4
-
-.Lno_insw_2:	tst	r2, #1
-		ldrne	r3, [r0]
-		strneb	r3, [r1], #1
-		movne	r3, r3, lsr #8
-		strneb	r3, [r1]
-
-		ldmfd	sp!, {r4, r5, r6, pc}
-
-
diff --git a/arch/arm/lib/io-writesw-armv3.S b/arch/arm/lib/io-writesw-armv3.S
deleted file mode 100644
index 49b800419e32..000000000000
--- a/arch/arm/lib/io-writesw-armv3.S
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- *  linux/arch/arm/lib/io-writesw-armv3.S
- *
- *  Copyright (C) 1995-2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-.Loutsw_bad_alignment:
-		adr	r0, .Loutsw_bad_align_msg
-		mov	r2, lr
-		b	panic
-.Loutsw_bad_align_msg:
-		.asciz	"outsw: bad buffer alignment (0x%p, lr=0x%08lX)\n"
-		.align
-
-.Loutsw_align:	tst	r1, #1
-		bne	.Loutsw_bad_alignment
-
-		add	r1, r1, #2
-
-		ldr	r3, [r1, #-4]
-		mov	r3, r3, lsr #16
-		orr	r3, r3, r3, lsl #16
-		str	r3, [r0]
-		subs	r2, r2, #1
-		moveq	pc, lr
-
-ENTRY(__raw_writesw)
-		teq	r2, #0		@ do we have to check for the zero len?
-		moveq	pc, lr
-		tst	r1, #3
-		bne	.Loutsw_align
-
-		stmfd	sp!, {r4, r5, r6, lr}
-
-		subs	r2, r2, #8
-		bmi	.Lno_outsw_8
-
-.Loutsw_8_lp:	ldmia	r1!, {r3, r4, r5, r6}
-
-		mov	ip, r3, lsl #16
-		orr	ip, ip, ip, lsr #16
-		str	ip, [r0]
-
-		mov	ip, r3, lsr #16
-		orr	ip, ip, ip, lsl #16
-		str	ip, [r0]
-
-		mov	ip, r4, lsl #16
-		orr	ip, ip, ip, lsr #16
-		str	ip, [r0]
-
-		mov	ip, r4, lsr #16
-		orr	ip, ip, ip, lsl #16
-		str	ip, [r0]
-
-		mov	ip, r5, lsl #16
-		orr	ip, ip, ip, lsr #16
-		str	ip, [r0]
-
-		mov	ip, r5, lsr #16
-		orr	ip, ip, ip, lsl #16
-		str	ip, [r0]
-
-		mov	ip, r6, lsl #16
-		orr	ip, ip, ip, lsr #16
-		str	ip, [r0]
-
-		mov	ip, r6, lsr #16
-		orr	ip, ip, ip, lsl #16
-		str	ip, [r0]
-
-		subs	r2, r2, #8
-		bpl	.Loutsw_8_lp
-
-		tst	r2, #7
-		ldmeqfd	sp!, {r4, r5, r6, pc}
-
-.Lno_outsw_8:	tst	r2, #4
-		beq	.Lno_outsw_4
-
-		ldmia	r1!, {r3, r4}
-
-		mov	ip, r3, lsl #16
-		orr	ip, ip, ip, lsr #16
-		str	ip, [r0]
-
-		mov	ip, r3, lsr #16
-		orr	ip, ip, ip, lsl #16
-		str	ip, [r0]
-
-		mov	ip, r4, lsl #16
-		orr	ip, ip, ip, lsr #16
-		str	ip, [r0]
-
-		mov	ip, r4, lsr #16
-		orr	ip, ip, ip, lsl #16
-		str	ip, [r0]
-
-.Lno_outsw_4:	tst	r2, #2
-		beq	.Lno_outsw_2
-
-		ldr	r3, [r1], #4
-
-		mov	ip, r3, lsl #16
-		orr	ip, ip, ip, lsr #16
-		str	ip, [r0]
-
-		mov	ip, r3, lsr #16
-		orr	ip, ip, ip, lsl #16
-		str	ip, [r0]
-
-.Lno_outsw_2:	tst	r2, #1
-
-		ldrne	r3, [r1]
-
-		movne	ip, r3, lsl #16
-		orrne	ip, ip, ip, lsr #16
-		strne	ip, [r0]
-
-		ldmfd	sp!, {r4, r5, r6, pc}
diff --git a/arch/arm/lib/uaccess.S b/arch/arm/lib/uaccess.S
deleted file mode 100644
index 5c908b1cb8ed..000000000000
--- a/arch/arm/lib/uaccess.S
+++ /dev/null
@@ -1,564 +0,0 @@
-/*
- *  linux/arch/arm/lib/uaccess.S
- *
- *  Copyright (C) 1995, 1996,1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Routines to block copy data to/from user memory
- *   These are highly optimised both for the 4k page size
- *   and for various alignments.
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <asm/errno.h>
-#include <asm/domain.h>
-
-		.text
-
-#define PAGE_SHIFT 12
-
-/* Prototype: int __copy_to_user(void *to, const char *from, size_t n)
- * Purpose  : copy a block to user memory from kernel memory
- * Params   : to   - user memory
- *          : from - kernel memory
- *          : n    - number of bytes to copy
- * Returns  : Number of bytes NOT copied.
- */
-
-.Lc2u_dest_not_aligned:
-		rsb	ip, ip, #4
-		cmp	ip, #2
-		ldrb	r3, [r1], #1
-USER(	TUSER(	strb)	r3, [r0], #1)			@ May fault
-		ldrgeb	r3, [r1], #1
-USER(	TUSER(	strgeb) r3, [r0], #1)			@ May fault
-		ldrgtb	r3, [r1], #1
-USER(	TUSER(	strgtb) r3, [r0], #1)			@ May fault
-		sub	r2, r2, ip
-		b	.Lc2u_dest_aligned
-
-ENTRY(__copy_to_user)
-		stmfd	sp!, {r2, r4 - r7, lr}
-		cmp	r2, #4
-		blt	.Lc2u_not_enough
-		ands	ip, r0, #3
-		bne	.Lc2u_dest_not_aligned
-.Lc2u_dest_aligned:
-
-		ands	ip, r1, #3
-		bne	.Lc2u_src_not_aligned
-/*
- * Seeing as there has to be at least 8 bytes to copy, we can
- * copy one word, and force a user-mode page fault...
- */
-
-.Lc2u_0fupi:	subs	r2, r2, #4
-		addmi	ip, r2, #4
-		bmi	.Lc2u_0nowords
-		ldr	r3, [r1], #4
-USER(	TUSER(	str)	r3, [r0], #4)			@ May fault
-		mov	ip, r0, lsl #32 - PAGE_SHIFT	@ On each page, use a ld/st??t instruction
-		rsb	ip, ip, #0
-		movs	ip, ip, lsr #32 - PAGE_SHIFT
-		beq	.Lc2u_0fupi
-/*
- * ip = max no. of bytes to copy before needing another "strt" insn
- */
-		cmp	r2, ip
-		movlt	ip, r2
-		sub	r2, r2, ip
-		subs	ip, ip, #32
-		blt	.Lc2u_0rem8lp
-
-.Lc2u_0cpy8lp:	ldmia	r1!, {r3 - r6}
-		stmia	r0!, {r3 - r6}			@ Shouldnt fault
-		ldmia	r1!, {r3 - r6}
-		subs	ip, ip, #32
-		stmia	r0!, {r3 - r6}			@ Shouldnt fault
-		bpl	.Lc2u_0cpy8lp
-
-.Lc2u_0rem8lp:	cmn	ip, #16
-		ldmgeia	r1!, {r3 - r6}
-		stmgeia	r0!, {r3 - r6}			@ Shouldnt fault
-		tst	ip, #8
-		ldmneia	r1!, {r3 - r4}
-		stmneia	r0!, {r3 - r4}			@ Shouldnt fault
-		tst	ip, #4
-		ldrne	r3, [r1], #4
-	TUSER(	strne) r3, [r0], #4			@ Shouldnt fault
-		ands	ip, ip, #3
-		beq	.Lc2u_0fupi
-.Lc2u_0nowords:	teq	ip, #0
-		beq	.Lc2u_finished
-.Lc2u_nowords:	cmp	ip, #2
-		ldrb	r3, [r1], #1
-USER(	TUSER(	strb)	r3, [r0], #1)			@ May fault
-		ldrgeb	r3, [r1], #1
-USER(	TUSER(	strgeb) r3, [r0], #1)			@ May fault
-		ldrgtb	r3, [r1], #1
-USER(	TUSER(	strgtb) r3, [r0], #1)			@ May fault
-		b	.Lc2u_finished
-
-.Lc2u_not_enough:
-		movs	ip, r2
-		bne	.Lc2u_nowords
-.Lc2u_finished:	mov	r0, #0
-		ldmfd	sp!, {r2, r4 - r7, pc}
-
-.Lc2u_src_not_aligned:
-		bic	r1, r1, #3
-		ldr	r7, [r1], #4
-		cmp	ip, #2
-		bgt	.Lc2u_3fupi
-		beq	.Lc2u_2fupi
-.Lc2u_1fupi:	subs	r2, r2, #4
-		addmi	ip, r2, #4
-		bmi	.Lc2u_1nowords
-		mov	r3, r7, pull #8
-		ldr	r7, [r1], #4
-		orr	r3, r3, r7, push #24
-USER(	TUSER(	str)	r3, [r0], #4)			@ May fault
-		mov	ip, r0, lsl #32 - PAGE_SHIFT
-		rsb	ip, ip, #0
-		movs	ip, ip, lsr #32 - PAGE_SHIFT
-		beq	.Lc2u_1fupi
-		cmp	r2, ip
-		movlt	ip, r2
-		sub	r2, r2, ip
-		subs	ip, ip, #16
-		blt	.Lc2u_1rem8lp
-
-.Lc2u_1cpy8lp:	mov	r3, r7, pull #8
-		ldmia	r1!, {r4 - r7}
-		subs	ip, ip, #16
-		orr	r3, r3, r4, push #24
-		mov	r4, r4, pull #8
-		orr	r4, r4, r5, push #24
-		mov	r5, r5, pull #8
-		orr	r5, r5, r6, push #24
-		mov	r6, r6, pull #8
-		orr	r6, r6, r7, push #24
-		stmia	r0!, {r3 - r6}			@ Shouldnt fault
-		bpl	.Lc2u_1cpy8lp
-
-.Lc2u_1rem8lp:	tst	ip, #8
-		movne	r3, r7, pull #8
-		ldmneia	r1!, {r4, r7}
-		orrne	r3, r3, r4, push #24
-		movne	r4, r4, pull #8
-		orrne	r4, r4, r7, push #24
-		stmneia	r0!, {r3 - r4}			@ Shouldnt fault
-		tst	ip, #4
-		movne	r3, r7, pull #8
-		ldrne	r7, [r1], #4
-		orrne	r3, r3, r7, push #24
-	TUSER(	strne) r3, [r0], #4			@ Shouldnt fault
-		ands	ip, ip, #3
-		beq	.Lc2u_1fupi
-.Lc2u_1nowords:	mov	r3, r7, get_byte_1
-		teq	ip, #0
-		beq	.Lc2u_finished
-		cmp	ip, #2
-USER(	TUSER(	strb)	r3, [r0], #1)			@ May fault
-		movge	r3, r7, get_byte_2
-USER(	TUSER(	strgeb) r3, [r0], #1)			@ May fault
-		movgt	r3, r7, get_byte_3
-USER(	TUSER(	strgtb) r3, [r0], #1)			@ May fault
-		b	.Lc2u_finished
-
-.Lc2u_2fupi:	subs	r2, r2, #4
-		addmi	ip, r2, #4
-		bmi	.Lc2u_2nowords
-		mov	r3, r7, pull #16
-		ldr	r7, [r1], #4
-		orr	r3, r3, r7, push #16
-USER(	TUSER(	str)	r3, [r0], #4)			@ May fault
-		mov	ip, r0, lsl #32 - PAGE_SHIFT
-		rsb	ip, ip, #0
-		movs	ip, ip, lsr #32 - PAGE_SHIFT
-		beq	.Lc2u_2fupi
-		cmp	r2, ip
-		movlt	ip, r2
-		sub	r2, r2, ip
-		subs	ip, ip, #16
-		blt	.Lc2u_2rem8lp
-
-.Lc2u_2cpy8lp:	mov	r3, r7, pull #16
-		ldmia	r1!, {r4 - r7}
-		subs	ip, ip, #16
-		orr	r3, r3, r4, push #16
-		mov	r4, r4, pull #16
-		orr	r4, r4, r5, push #16
-		mov	r5, r5, pull #16
-		orr	r5, r5, r6, push #16
-		mov	r6, r6, pull #16
-		orr	r6, r6, r7, push #16
-		stmia	r0!, {r3 - r6}			@ Shouldnt fault
-		bpl	.Lc2u_2cpy8lp
-
-.Lc2u_2rem8lp:	tst	ip, #8
-		movne	r3, r7, pull #16
-		ldmneia	r1!, {r4, r7}
-		orrne	r3, r3, r4, push #16
-		movne	r4, r4, pull #16
-		orrne	r4, r4, r7, push #16
-		stmneia	r0!, {r3 - r4}			@ Shouldnt fault
-		tst	ip, #4
-		movne	r3, r7, pull #16
-		ldrne	r7, [r1], #4
-		orrne	r3, r3, r7, push #16
-	TUSER(	strne) r3, [r0], #4			@ Shouldnt fault
-		ands	ip, ip, #3
-		beq	.Lc2u_2fupi
-.Lc2u_2nowords:	mov	r3, r7, get_byte_2
-		teq	ip, #0
-		beq	.Lc2u_finished
-		cmp	ip, #2
-USER(	TUSER(	strb)	r3, [r0], #1)			@ May fault
-		movge	r3, r7, get_byte_3
-USER(	TUSER(	strgeb) r3, [r0], #1)			@ May fault
-		ldrgtb	r3, [r1], #0
-USER(	TUSER(	strgtb) r3, [r0], #1)			@ May fault
-		b	.Lc2u_finished
-
-.Lc2u_3fupi:	subs	r2, r2, #4
-		addmi	ip, r2, #4
-		bmi	.Lc2u_3nowords
-		mov	r3, r7, pull #24
-		ldr	r7, [r1], #4
-		orr	r3, r3, r7, push #8
-USER(	TUSER(	str)	r3, [r0], #4)			@ May fault
-		mov	ip, r0, lsl #32 - PAGE_SHIFT
-		rsb	ip, ip, #0
-		movs	ip, ip, lsr #32 - PAGE_SHIFT
-		beq	.Lc2u_3fupi
-		cmp	r2, ip
-		movlt	ip, r2
-		sub	r2, r2, ip
-		subs	ip, ip, #16
-		blt	.Lc2u_3rem8lp
-
-.Lc2u_3cpy8lp:	mov	r3, r7, pull #24
-		ldmia	r1!, {r4 - r7}
-		subs	ip, ip, #16
-		orr	r3, r3, r4, push #8
-		mov	r4, r4, pull #24
-		orr	r4, r4, r5, push #8
-		mov	r5, r5, pull #24
-		orr	r5, r5, r6, push #8
-		mov	r6, r6, pull #24
-		orr	r6, r6, r7, push #8
-		stmia	r0!, {r3 - r6}			@ Shouldnt fault
-		bpl	.Lc2u_3cpy8lp
-
-.Lc2u_3rem8lp:	tst	ip, #8
-		movne	r3, r7, pull #24
-		ldmneia	r1!, {r4, r7}
-		orrne	r3, r3, r4, push #8
-		movne	r4, r4, pull #24
-		orrne	r4, r4, r7, push #8
-		stmneia	r0!, {r3 - r4}			@ Shouldnt fault
-		tst	ip, #4
-		movne	r3, r7, pull #24
-		ldrne	r7, [r1], #4
-		orrne	r3, r3, r7, push #8
-	TUSER(	strne) r3, [r0], #4			@ Shouldnt fault
-		ands	ip, ip, #3
-		beq	.Lc2u_3fupi
-.Lc2u_3nowords:	mov	r3, r7, get_byte_3
-		teq	ip, #0
-		beq	.Lc2u_finished
-		cmp	ip, #2
-USER(	TUSER(	strb)	r3, [r0], #1)			@ May fault
-		ldrgeb	r3, [r1], #1
-USER(	TUSER(	strgeb) r3, [r0], #1)			@ May fault
-		ldrgtb	r3, [r1], #0
-USER(	TUSER(	strgtb) r3, [r0], #1)			@ May fault
-		b	.Lc2u_finished
-ENDPROC(__copy_to_user)
-
-		.pushsection .fixup,"ax"
-		.align	0
-9001:		ldmfd	sp!, {r0, r4 - r7, pc}
-		.popsection
-
-/* Prototype: unsigned long __copy_from_user(void *to,const void *from,unsigned long n);
- * Purpose  : copy a block from user memory to kernel memory
- * Params   : to   - kernel memory
- *          : from - user memory
- *          : n    - number of bytes to copy
- * Returns  : Number of bytes NOT copied.
- */
-.Lcfu_dest_not_aligned:
-		rsb	ip, ip, #4
-		cmp	ip, #2
-USER(	TUSER(	ldrb)	r3, [r1], #1)			@ May fault
-		strb	r3, [r0], #1
-USER(	TUSER(	ldrgeb) r3, [r1], #1)			@ May fault
-		strgeb	r3, [r0], #1
-USER(	TUSER(	ldrgtb) r3, [r1], #1)			@ May fault
-		strgtb	r3, [r0], #1
-		sub	r2, r2, ip
-		b	.Lcfu_dest_aligned
-
-ENTRY(__copy_from_user)
-		stmfd	sp!, {r0, r2, r4 - r7, lr}
-		cmp	r2, #4
-		blt	.Lcfu_not_enough
-		ands	ip, r0, #3
-		bne	.Lcfu_dest_not_aligned
-.Lcfu_dest_aligned:
-		ands	ip, r1, #3
-		bne	.Lcfu_src_not_aligned
-
-/*
- * Seeing as there has to be at least 8 bytes to copy, we can
- * copy one word, and force a user-mode page fault...
- */
-
-.Lcfu_0fupi:	subs	r2, r2, #4
-		addmi	ip, r2, #4
-		bmi	.Lcfu_0nowords
-USER(	TUSER(	ldr)	r3, [r1], #4)
-		str	r3, [r0], #4
-		mov	ip, r1, lsl #32 - PAGE_SHIFT	@ On each page, use a ld/st??t instruction
-		rsb	ip, ip, #0
-		movs	ip, ip, lsr #32 - PAGE_SHIFT
-		beq	.Lcfu_0fupi
-/*
- * ip = max no. of bytes to copy before needing another "strt" insn
- */
-		cmp	r2, ip
-		movlt	ip, r2
-		sub	r2, r2, ip
-		subs	ip, ip, #32
-		blt	.Lcfu_0rem8lp
-
-.Lcfu_0cpy8lp:	ldmia	r1!, {r3 - r6}			@ Shouldnt fault
-		stmia	r0!, {r3 - r6}
-		ldmia	r1!, {r3 - r6}			@ Shouldnt fault
-		subs	ip, ip, #32
-		stmia	r0!, {r3 - r6}
-		bpl	.Lcfu_0cpy8lp
-
-.Lcfu_0rem8lp:	cmn	ip, #16
-		ldmgeia	r1!, {r3 - r6}			@ Shouldnt fault
-		stmgeia	r0!, {r3 - r6}
-		tst	ip, #8
-		ldmneia	r1!, {r3 - r4}			@ Shouldnt fault
-		stmneia	r0!, {r3 - r4}
-		tst	ip, #4
-	TUSER(	ldrne) r3, [r1], #4			@ Shouldnt fault
-		strne	r3, [r0], #4
-		ands	ip, ip, #3
-		beq	.Lcfu_0fupi
-.Lcfu_0nowords:	teq	ip, #0
-		beq	.Lcfu_finished
-.Lcfu_nowords:	cmp	ip, #2
-USER(	TUSER(	ldrb)	r3, [r1], #1)			@ May fault
-		strb	r3, [r0], #1
-USER(	TUSER(	ldrgeb) r3, [r1], #1)			@ May fault
-		strgeb	r3, [r0], #1
-USER(	TUSER(	ldrgtb) r3, [r1], #1)			@ May fault
-		strgtb	r3, [r0], #1
-		b	.Lcfu_finished
-
-.Lcfu_not_enough:
-		movs	ip, r2
-		bne	.Lcfu_nowords
-.Lcfu_finished:	mov	r0, #0
-		add	sp, sp, #8
-		ldmfd	sp!, {r4 - r7, pc}
-
-.Lcfu_src_not_aligned:
-		bic	r1, r1, #3
-USER(	TUSER(	ldr)	r7, [r1], #4)			@ May fault
-		cmp	ip, #2
-		bgt	.Lcfu_3fupi
-		beq	.Lcfu_2fupi
-.Lcfu_1fupi:	subs	r2, r2, #4
-		addmi	ip, r2, #4
-		bmi	.Lcfu_1nowords
-		mov	r3, r7, pull #8
-USER(	TUSER(	ldr)	r7, [r1], #4)			@ May fault
-		orr	r3, r3, r7, push #24
-		str	r3, [r0], #4
-		mov	ip, r1, lsl #32 - PAGE_SHIFT
-		rsb	ip, ip, #0
-		movs	ip, ip, lsr #32 - PAGE_SHIFT
-		beq	.Lcfu_1fupi
-		cmp	r2, ip
-		movlt	ip, r2
-		sub	r2, r2, ip
-		subs	ip, ip, #16
-		blt	.Lcfu_1rem8lp
-
-.Lcfu_1cpy8lp:	mov	r3, r7, pull #8
-		ldmia	r1!, {r4 - r7}			@ Shouldnt fault
-		subs	ip, ip, #16
-		orr	r3, r3, r4, push #24
-		mov	r4, r4, pull #8
-		orr	r4, r4, r5, push #24
-		mov	r5, r5, pull #8
-		orr	r5, r5, r6, push #24
-		mov	r6, r6, pull #8
-		orr	r6, r6, r7, push #24
-		stmia	r0!, {r3 - r6}
-		bpl	.Lcfu_1cpy8lp
-
-.Lcfu_1rem8lp:	tst	ip, #8
-		movne	r3, r7, pull #8
-		ldmneia	r1!, {r4, r7}			@ Shouldnt fault
-		orrne	r3, r3, r4, push #24
-		movne	r4, r4, pull #8
-		orrne	r4, r4, r7, push #24
-		stmneia	r0!, {r3 - r4}
-		tst	ip, #4
-		movne	r3, r7, pull #8
-USER(	TUSER(	ldrne) r7, [r1], #4)			@ May fault
-		orrne	r3, r3, r7, push #24
-		strne	r3, [r0], #4
-		ands	ip, ip, #3
-		beq	.Lcfu_1fupi
-.Lcfu_1nowords:	mov	r3, r7, get_byte_1
-		teq	ip, #0
-		beq	.Lcfu_finished
-		cmp	ip, #2
-		strb	r3, [r0], #1
-		movge	r3, r7, get_byte_2
-		strgeb	r3, [r0], #1
-		movgt	r3, r7, get_byte_3
-		strgtb	r3, [r0], #1
-		b	.Lcfu_finished
-
-.Lcfu_2fupi:	subs	r2, r2, #4
-		addmi	ip, r2, #4
-		bmi	.Lcfu_2nowords
-		mov	r3, r7, pull #16
-USER(	TUSER(	ldr)	r7, [r1], #4)			@ May fault
-		orr	r3, r3, r7, push #16
-		str	r3, [r0], #4
-		mov	ip, r1, lsl #32 - PAGE_SHIFT
-		rsb	ip, ip, #0
-		movs	ip, ip, lsr #32 - PAGE_SHIFT
-		beq	.Lcfu_2fupi
-		cmp	r2, ip
-		movlt	ip, r2
-		sub	r2, r2, ip
-		subs	ip, ip, #16
-		blt	.Lcfu_2rem8lp
-
-
-.Lcfu_2cpy8lp:	mov	r3, r7, pull #16
-		ldmia	r1!, {r4 - r7}			@ Shouldnt fault
-		subs	ip, ip, #16
-		orr	r3, r3, r4, push #16
-		mov	r4, r4, pull #16
-		orr	r4, r4, r5, push #16
-		mov	r5, r5, pull #16
-		orr	r5, r5, r6, push #16
-		mov	r6, r6, pull #16
-		orr	r6, r6, r7, push #16
-		stmia	r0!, {r3 - r6}
-		bpl	.Lcfu_2cpy8lp
-
-.Lcfu_2rem8lp:	tst	ip, #8
-		movne	r3, r7, pull #16
-		ldmneia	r1!, {r4, r7}			@ Shouldnt fault
-		orrne	r3, r3, r4, push #16
-		movne	r4, r4, pull #16
-		orrne	r4, r4, r7, push #16
-		stmneia	r0!, {r3 - r4}
-		tst	ip, #4
-		movne	r3, r7, pull #16
-USER(	TUSER(	ldrne) r7, [r1], #4)			@ May fault
-		orrne	r3, r3, r7, push #16
-		strne	r3, [r0], #4
-		ands	ip, ip, #3
-		beq	.Lcfu_2fupi
-.Lcfu_2nowords:	mov	r3, r7, get_byte_2
-		teq	ip, #0
-		beq	.Lcfu_finished
-		cmp	ip, #2
-		strb	r3, [r0], #1
-		movge	r3, r7, get_byte_3
-		strgeb	r3, [r0], #1
-USER(	TUSER(	ldrgtb) r3, [r1], #0)			@ May fault
-		strgtb	r3, [r0], #1
-		b	.Lcfu_finished
-
-.Lcfu_3fupi:	subs	r2, r2, #4
-		addmi	ip, r2, #4
-		bmi	.Lcfu_3nowords
-		mov	r3, r7, pull #24
-USER(	TUSER(	ldr)	r7, [r1], #4)			@ May fault
-		orr	r3, r3, r7, push #8
-		str	r3, [r0], #4
-		mov	ip, r1, lsl #32 - PAGE_SHIFT
-		rsb	ip, ip, #0
-		movs	ip, ip, lsr #32 - PAGE_SHIFT
-		beq	.Lcfu_3fupi
-		cmp	r2, ip
-		movlt	ip, r2
-		sub	r2, r2, ip
-		subs	ip, ip, #16
-		blt	.Lcfu_3rem8lp
-
-.Lcfu_3cpy8lp:	mov	r3, r7, pull #24
-		ldmia	r1!, {r4 - r7}			@ Shouldnt fault
-		orr	r3, r3, r4, push #8
-		mov	r4, r4, pull #24
-		orr	r4, r4, r5, push #8
-		mov	r5, r5, pull #24
-		orr	r5, r5, r6, push #8
-		mov	r6, r6, pull #24
-		orr	r6, r6, r7, push #8
-		stmia	r0!, {r3 - r6}
-		subs	ip, ip, #16
-		bpl	.Lcfu_3cpy8lp
-
-.Lcfu_3rem8lp:	tst	ip, #8
-		movne	r3, r7, pull #24
-		ldmneia	r1!, {r4, r7}			@ Shouldnt fault
-		orrne	r3, r3, r4, push #8
-		movne	r4, r4, pull #24
-		orrne	r4, r4, r7, push #8
-		stmneia	r0!, {r3 - r4}
-		tst	ip, #4
-		movne	r3, r7, pull #24
-USER(	TUSER(	ldrne) r7, [r1], #4)			@ May fault
-		orrne	r3, r3, r7, push #8
-		strne	r3, [r0], #4
-		ands	ip, ip, #3
-		beq	.Lcfu_3fupi
-.Lcfu_3nowords:	mov	r3, r7, get_byte_3
-		teq	ip, #0
-		beq	.Lcfu_finished
-		cmp	ip, #2
-		strb	r3, [r0], #1
-USER(	TUSER(	ldrgeb) r3, [r1], #1)			@ May fault
-		strgeb	r3, [r0], #1
-USER(	TUSER(	ldrgtb) r3, [r1], #1)			@ May fault
-		strgtb	r3, [r0], #1
-		b	.Lcfu_finished
-ENDPROC(__copy_from_user)
-
-		.pushsection .fixup,"ax"
-		.align	0
-		/*
-		 * We took an exception.  r0 contains a pointer to
-		 * the byte not copied.
-		 */
-9001:		ldr	r2, [sp], #4			@ void *to
-		sub	r2, r0, r2			@ bytes copied
-		ldr	r1, [sp], #4			@ unsigned long count
-		subs	r4, r1, r2			@ bytes left to copy
-		movne	r1, r4
-		blne	__memzero
-		mov	r0, r4
-		ldmfd	sp!, {r4 - r7, pc}
-		.popsection
-
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 45db05d8d94c..19505c0a3f01 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -9,15 +9,6 @@ config HAVE_AT91_DBGU0
 config HAVE_AT91_DBGU1
 	bool
 
-config HAVE_AT91_USART3
-	bool
-
-config HAVE_AT91_USART4
-	bool
-
-config HAVE_AT91_USART5
-	bool
-
 config AT91_SAM9_ALT_RESET
 	bool
 	default !ARCH_AT91X40
@@ -26,87 +17,129 @@ config AT91_SAM9G45_RESET
 	bool
 	default !ARCH_AT91X40
 
+config SOC_AT91SAM9
+	bool
+	select GENERIC_CLOCKEVENTS
+	select CPU_ARM926T
+
 menu "Atmel AT91 System-on-Chip"
 
-choice
-	prompt "Atmel AT91 Processor"
+comment "Atmel AT91 Processor"
 
-config ARCH_AT91RM9200
+config SOC_AT91SAM9
+	bool
+	select CPU_ARM926T
+	select AT91_SAM9_TIME
+	select AT91_SAM9_SMC
+
+config SOC_AT91RM9200
 	bool "AT91RM9200"
 	select CPU_ARM920T
 	select GENERIC_CLOCKEVENTS
 	select HAVE_AT91_DBGU0
-	select HAVE_AT91_USART3
 
-config ARCH_AT91SAM9260
-	bool "AT91SAM9260 or AT91SAM9XE"
-	select CPU_ARM926T
-	select GENERIC_CLOCKEVENTS
+config SOC_AT91SAM9260
+	bool "AT91SAM9260, AT91SAM9XE or AT91SAM9G20"
+	select SOC_AT91SAM9
 	select HAVE_AT91_DBGU0
-	select HAVE_AT91_USART3
-	select HAVE_AT91_USART4
-	select HAVE_AT91_USART5
 	select HAVE_NET_MACB
+	help
+	  Select this if you are using one of Atmel's AT91SAM9260, AT91SAM9XE
+	  or AT91SAM9G20 SoC.
 
-config ARCH_AT91SAM9261
-	bool "AT91SAM9261"
-	select CPU_ARM926T
-	select GENERIC_CLOCKEVENTS
-	select HAVE_FB_ATMEL
-	select HAVE_AT91_DBGU0
-
-config ARCH_AT91SAM9G10
-	bool "AT91SAM9G10"
-	select CPU_ARM926T
-	select GENERIC_CLOCKEVENTS
+config SOC_AT91SAM9261
+	bool "AT91SAM9261 or AT91SAM9G10"
+	select SOC_AT91SAM9
 	select HAVE_AT91_DBGU0
 	select HAVE_FB_ATMEL
+	help
+	  Select this if you are using one of Atmel's AT91SAM9261 or AT91SAM9G10 SoC.
 
-config ARCH_AT91SAM9263
+config SOC_AT91SAM9263
 	bool "AT91SAM9263"
-	select CPU_ARM926T
-	select GENERIC_CLOCKEVENTS
+	select SOC_AT91SAM9
+	select HAVE_AT91_DBGU1
 	select HAVE_FB_ATMEL
 	select HAVE_NET_MACB
-	select HAVE_AT91_DBGU1
 
-config ARCH_AT91SAM9RL
+config SOC_AT91SAM9RL
 	bool "AT91SAM9RL"
-	select CPU_ARM926T
-	select GENERIC_CLOCKEVENTS
-	select HAVE_AT91_USART3
-	select HAVE_FB_ATMEL
-	select HAVE_AT91_DBGU0
-
-config ARCH_AT91SAM9G20
-	bool "AT91SAM9G20"
-	select CPU_ARM926T
-	select GENERIC_CLOCKEVENTS
+	select SOC_AT91SAM9
 	select HAVE_AT91_DBGU0
-	select HAVE_AT91_USART3
-	select HAVE_AT91_USART4
-	select HAVE_AT91_USART5
-	select HAVE_NET_MACB
+	select HAVE_FB_ATMEL
 
-config ARCH_AT91SAM9G45
-	bool "AT91SAM9G45"
-	select CPU_ARM926T
-	select GENERIC_CLOCKEVENTS
-	select HAVE_AT91_USART3
+config SOC_AT91SAM9G45
+	bool "AT91SAM9G45 or AT91SAM9M10 families"
+	select SOC_AT91SAM9
+	select HAVE_AT91_DBGU1
 	select HAVE_FB_ATMEL
 	select HAVE_NET_MACB
-	select HAVE_AT91_DBGU1
+	help
+	  Select this if you are using one of Atmel's AT91SAM9G45 family SoC.
+	  This support covers AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11.
 
-config ARCH_AT91SAM9X5
+config SOC_AT91SAM9X5
 	bool "AT91SAM9x5 family"
-	select CPU_ARM926T
-	select GENERIC_CLOCKEVENTS
+	select SOC_AT91SAM9
+	select HAVE_AT91_DBGU0
 	select HAVE_FB_ATMEL
 	select HAVE_NET_MACB
+	help
+	  Select this if you are using one of Atmel's AT91SAM9x5 family SoC.
+	  This means that your SAM9 name finishes with a '5' (except if it is
+	  AT91SAM9G45!).
+	  This support covers AT91SAM9G15, AT91SAM9G25, AT91SAM9X25, AT91SAM9G35
+	  and AT91SAM9X35.
+
+config SOC_AT91SAM9N12
+	bool "AT91SAM9N12 family"
+	select SOC_AT91SAM9
 	select HAVE_AT91_DBGU0
+	select HAVE_FB_ATMEL
+	help
+	  Select this if you are using Atmel's AT91SAM9N12 SoC.
+
+choice
+	prompt "Atmel AT91 Processor Devices for non DT boards"
+
+config ARCH_AT91_NONE
+	bool "None"
+
+config ARCH_AT91RM9200
+	bool "AT91RM9200"
+	select SOC_AT91RM9200
+
+config ARCH_AT91SAM9260
+	bool "AT91SAM9260 or AT91SAM9XE"
+	select SOC_AT91SAM9260
+
+config ARCH_AT91SAM9261
+	bool "AT91SAM9261"
+	select SOC_AT91SAM9261
+
+config ARCH_AT91SAM9G10
+	bool "AT91SAM9G10"
+	select SOC_AT91SAM9261
+
+config ARCH_AT91SAM9263
+	bool "AT91SAM9263"
+	select SOC_AT91SAM9263
+
+config ARCH_AT91SAM9RL
+	bool "AT91SAM9RL"
+	select SOC_AT91SAM9RL
+
+config ARCH_AT91SAM9G20
+	bool "AT91SAM9G20"
+	select SOC_AT91SAM9260
+
+config ARCH_AT91SAM9G45
+	bool "AT91SAM9G45"
+	select SOC_AT91SAM9G45
 
 config ARCH_AT91X40
 	bool "AT91x40"
+	depends on !MMU
 	select ARCH_USES_GETTIMEOFFSET
 
 endchoice
@@ -364,6 +397,7 @@ config MACH_AT91SAM9G20EK_2MMC
 	  Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
 	  with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and
 	  onwards.
+	  <http://www.atmel.com/tools/SAM9G20-EK.aspx>
 
 config MACH_CPU9G20
 	bool "Eukrea CPU9G20 board"
@@ -433,9 +467,10 @@ comment "AT91SAM9G45 Board Type"
 config MACH_AT91SAM9M10G45EK
 	bool "Atmel AT91SAM9M10G45-EK Evaluation Kits"
 	help
-	  Select this if you are using Atmel's AT91SAM9G45-EKES Evaluation Kit.
-	  "ES" at the end of the name means that this board is an
-	  Engineering Sample.
+	  Select this if you are using Atmel's AT91SAM9M10G45-EK Evaluation Kit.
+	  Those boards can be populated with any SoC of AT91SAM9G45 or AT91SAM9M10
+	  families: AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11.
+	  <http://www.atmel.com/tools/SAM9M10-G45-EK.aspx>
 
 endif
 
@@ -515,41 +550,6 @@ config AT91_TIMER_HZ
 	  system clock (of at least several MHz), rounding is less of a
 	  problem so it can be safer to use a decimal values like 100.
 
-choice
-	prompt "Select a UART for early kernel messages"
-
-config AT91_EARLY_DBGU0
-	bool "DBGU on rm9200, 9260/9g20, 9261/9g10 and 9rl"
-	depends on HAVE_AT91_DBGU0
-
-config AT91_EARLY_DBGU1
-	bool "DBGU on 9263 and 9g45"
-	depends on HAVE_AT91_DBGU1
-
-config AT91_EARLY_USART0
-	bool "USART0"
-
-config AT91_EARLY_USART1
-	bool "USART1"
-
-config AT91_EARLY_USART2
-	bool "USART2"
-	depends on ! ARCH_AT91X40
-
-config AT91_EARLY_USART3
-	bool "USART3"
-	depends on HAVE_AT91_USART3
-
-config AT91_EARLY_USART4
-	bool "USART4"
-	depends on HAVE_AT91_USART4
-
-config AT91_EARLY_USART5
-	bool "USART5"
-	depends on HAVE_AT91_USART5
-
-endchoice
-
 endmenu
 
 endif
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 8512e53bed93..3bb7a51efc9d 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -10,17 +10,26 @@ obj-		:=
 obj-$(CONFIG_AT91_PMC_UNIT)	+= clock.o
 obj-$(CONFIG_AT91_SAM9_ALT_RESET) += at91sam9_alt_reset.o
 obj-$(CONFIG_AT91_SAM9G45_RESET) += at91sam9g45_reset.o
+obj-$(CONFIG_SOC_AT91SAM9)	+= at91sam926x_time.o sam9_smc.o
 
 # CPU-specific support
-obj-$(CONFIG_ARCH_AT91RM9200)	+= at91rm9200.o at91rm9200_time.o at91rm9200_devices.o
-obj-$(CONFIG_ARCH_AT91SAM9260)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o
-obj-$(CONFIG_ARCH_AT91SAM9261)	+= at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o
-obj-$(CONFIG_ARCH_AT91SAM9G10)	+= at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o
-obj-$(CONFIG_ARCH_AT91SAM9263)	+= at91sam9263.o at91sam926x_time.o at91sam9263_devices.o sam9_smc.o
-obj-$(CONFIG_ARCH_AT91SAM9RL)	+= at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o sam9_smc.o
-obj-$(CONFIG_ARCH_AT91SAM9G20)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o
-obj-$(CONFIG_ARCH_AT91SAM9G45)	+= at91sam9g45.o at91sam926x_time.o at91sam9g45_devices.o sam9_smc.o
-obj-$(CONFIG_ARCH_AT91SAM9X5)	+= at91sam9x5.o at91sam926x_time.o sam9_smc.o
+obj-$(CONFIG_SOC_AT91RM9200)	+= at91rm9200.o at91rm9200_time.o
+obj-$(CONFIG_SOC_AT91SAM9260)	+= at91sam9260.o
+obj-$(CONFIG_SOC_AT91SAM9261)	+= at91sam9261.o
+obj-$(CONFIG_SOC_AT91SAM9263)	+= at91sam9263.o
+obj-$(CONFIG_SOC_AT91SAM9G45)	+= at91sam9g45.o
+obj-$(CONFIG_SOC_AT91SAM9N12)	+= at91sam9n12.o
+obj-$(CONFIG_SOC_AT91SAM9X5)	+= at91sam9x5.o
+obj-$(CONFIG_SOC_AT91SAM9RL)	+= at91sam9rl.o
+
+obj-$(CONFIG_ARCH_AT91RM9200)	+= at91rm9200_devices.o
+obj-$(CONFIG_ARCH_AT91SAM9260)	+= at91sam9260_devices.o
+obj-$(CONFIG_ARCH_AT91SAM9261)	+= at91sam9261_devices.o
+obj-$(CONFIG_ARCH_AT91SAM9G10)	+= at91sam9261_devices.o
+obj-$(CONFIG_ARCH_AT91SAM9263)	+= at91sam9263_devices.o
+obj-$(CONFIG_ARCH_AT91SAM9RL)	+= at91sam9rl_devices.o
+obj-$(CONFIG_ARCH_AT91SAM9G20)	+= at91sam9260_devices.o
+obj-$(CONFIG_ARCH_AT91SAM9G45)	+= at91sam9g45_devices.o
 obj-$(CONFIG_ARCH_AT91X40)	+= at91x40.o at91x40_time.o
 
 # AT91RM9200 board-specific support
diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot
index 0da66ca4a4f8..9e84fe4f2aaa 100644
--- a/arch/arm/mach-at91/Makefile.boot
+++ b/arch/arm/mach-at91/Makefile.boot
@@ -14,9 +14,23 @@ initrd_phys-y	:= 0x20410000
 endif
 
 # Keep dtb files sorted alphabetically for each SoC
+# sam9260
+dtb-$(CONFIG_MACH_AT91SAM_DT) += ethernut5.dtb
+dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9260.dtb
+dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9260.dtb
+# sam9263
+dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9263ek.dtb
+dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9263.dtb
+dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9263.dtb
 # sam9g20
+dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9g20ek.dtb
+dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9g20ek_2mmc.dtb
+dtb-$(CONFIG_MACH_AT91SAM_DT) += kizbox.dtb
+dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9g20.dtb
 dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9g20.dtb
 # sam9g45
 dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9m10g45ek.dtb
+# sam9n12
+dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9n12ek.dtb
 # sam9x5
 dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9g25ek.dtb
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index 364c19357e60..26917687fc30 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -26,15 +26,6 @@
 #include "clock.h"
 #include "sam9_smc.h"
 
-static struct map_desc at91rm9200_io_desc[] __initdata = {
-	{
-		.virtual	= AT91_VA_BASE_EMAC,
-		.pfn		= __phys_to_pfn(AT91RM9200_BASE_EMAC),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	},
-};
-
 /* --------------------------------------------------------------------
  *  Clocks
  * -------------------------------------------------------------------- */
@@ -258,18 +249,6 @@ static void __init at91rm9200_register_clocks(void)
 	clk_register(&pck3);
 }
 
-static struct clk_lookup console_clock_lookup;
-
-void __init at91rm9200_set_console_clock(int id)
-{
-	if (id >= ARRAY_SIZE(usart_clocks_lookups))
-		return;
-
-	console_clock_lookup.con_id = "usart";
-	console_clock_lookup.clk = usart_clocks_lookups[id].clk;
-	clkdev_add(&console_clock_lookup);
-}
-
 /* --------------------------------------------------------------------
  *  GPIO
  * -------------------------------------------------------------------- */
@@ -315,7 +294,6 @@ static void __init at91rm9200_map_io(void)
 {
 	/* Map peripherals */
 	at91_init_sram(0, AT91RM9200_SRAM_BASE, AT91RM9200_SRAM_SIZE);
-	iotable_init(at91rm9200_io_desc, ARRAY_SIZE(at91rm9200_io_desc));
 }
 
 static void __init at91rm9200_ioremap_registers(void)
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index 99ce5c955e39..e6b7d0533dd7 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -140,8 +140,8 @@ static struct macb_platform_data eth_data;
 
 static struct resource eth_resources[] = {
 	[0] = {
-		.start	= AT91_VA_BASE_EMAC,
-		.end	= AT91_VA_BASE_EMAC + SZ_16K - 1,
+		.start	= AT91RM9200_BASE_EMAC,
+		.end	= AT91RM9200_BASE_EMAC + SZ_16K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -1152,14 +1152,6 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 		at91_uarts[portnr] = pdev;
 }
 
-void __init at91_set_serial_console(unsigned portnr)
-{
-	if (portnr < ATMEL_MAX_UART) {
-		atmel_default_console_device = at91_uarts[portnr];
-		at91rm9200_set_console_clock(at91_uarts[portnr]->id);
-	}
-}
-
 void __init at91_add_device_serial(void)
 {
 	int i;
@@ -1168,14 +1160,9 @@ void __init at91_add_device_serial(void)
 		if (at91_uarts[i])
 			platform_device_register(at91_uarts[i]);
 	}
-
-	if (!atmel_default_console_device)
-		printk(KERN_INFO "AT91: No default serial console defined.\n");
 }
 #else
-void __init __deprecated at91_init_serial(struct at91_uart_config *config) {}
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-void __init at91_set_serial_console(unsigned portnr) {}
 void __init at91_add_device_serial(void) {}
 #endif
 
diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c
index dd7f782b0b91..104ca40d8d18 100644
--- a/arch/arm/mach-at91/at91rm9200_time.c
+++ b/arch/arm/mach-at91/at91rm9200_time.c
@@ -23,6 +23,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/clockchips.h>
+#include <linux/export.h>
 
 #include <asm/mach/time.h>
 
@@ -176,6 +177,7 @@ static struct clock_event_device clkevt = {
 };
 
 void __iomem *at91_st_base;
+EXPORT_SYMBOL_GPL(at91_st_base);
 
 void __init at91rm9200_ioremap_st(u32 addr)
 {
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index 46f774233298..2b1e438ed878 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -55,6 +55,13 @@ static struct clk adc_clk = {
 	.pmc_mask	= 1 << AT91SAM9260_ID_ADC,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
+
+static struct clk adc_op_clk = {
+	.name		= "adc_op_clk",
+	.type		= CLK_TYPE_PERIPHERAL,
+	.rate_hz	= 5000000,
+};
+
 static struct clk usart0_clk = {
 	.name		= "usart0_clk",
 	.pmc_mask	= 1 << AT91SAM9260_ID_US0,
@@ -166,6 +173,7 @@ static struct clk *periph_clocks[] __initdata = {
 	&pioB_clk,
 	&pioC_clk,
 	&adc_clk,
+	&adc_op_clk,
 	&usart0_clk,
 	&usart1_clk,
 	&usart2_clk,
@@ -268,18 +276,6 @@ static void __init at91sam9260_register_clocks(void)
 	clk_register(&pck1);
 }
 
-static struct clk_lookup console_clock_lookup;
-
-void __init at91sam9260_set_console_clock(int id)
-{
-	if (id >= ARRAY_SIZE(usart_clocks_lookups))
-		return;
-
-	console_clock_lookup.con_id = "usart";
-	console_clock_lookup.clk = usart_clocks_lookups[id].clk;
-	clkdev_add(&console_clock_lookup);
-}
-
 /* --------------------------------------------------------------------
  *  GPIO
  * -------------------------------------------------------------------- */
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 7e5651ee9f85..0ded951f785a 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -17,12 +17,15 @@
 #include <linux/platform_device.h>
 #include <linux/i2c-gpio.h>
 
+#include <linux/platform_data/at91_adc.h>
+
 #include <mach/board.h>
 #include <mach/cpu.h>
 #include <mach/at91sam9260.h>
 #include <mach/at91sam9260_matrix.h>
 #include <mach/at91_matrix.h>
 #include <mach/at91sam9_smc.h>
+#include <mach/at91_adc.h>
 
 #include "generic.h"
 
@@ -598,6 +601,9 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 		else
 			cs_pin = spi1_standard_cs[devices[i].chip_select];
 
+		if (!gpio_is_valid(cs_pin))
+			continue;
+
 		if (devices[i].bus_num == 0)
 			enable_spi0 = 1;
 		else
@@ -699,25 +705,8 @@ static struct platform_device at91sam9260_tcb1_device = {
 	.num_resources	= ARRAY_SIZE(tcb1_resources),
 };
 
-#if defined(CONFIG_OF)
-static struct of_device_id tcb_ids[] = {
-	{ .compatible = "atmel,at91rm9200-tcb" },
-	{ /*sentinel*/ }
-};
-#endif
-
 static void __init at91_add_device_tc(void)
 {
-#if defined(CONFIG_OF)
-	struct device_node *np;
-
-	np = of_find_matching_node(NULL, tcb_ids);
-	if (np) {
-		of_node_put(np);
-		return;
-	}
-#endif
-
 	platform_device_register(&at91sam9260_tcb0_device);
 	platform_device_register(&at91sam9260_tcb1_device);
 }
@@ -1226,14 +1215,6 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 		at91_uarts[portnr] = pdev;
 }
 
-void __init at91_set_serial_console(unsigned portnr)
-{
-	if (portnr < ATMEL_MAX_UART) {
-		atmel_default_console_device = at91_uarts[portnr];
-		at91sam9260_set_console_clock(at91_uarts[portnr]->id);
-	}
-}
-
 void __init at91_add_device_serial(void)
 {
 	int i;
@@ -1242,13 +1223,9 @@ void __init at91_add_device_serial(void)
 		if (at91_uarts[i])
 			platform_device_register(at91_uarts[i]);
 	}
-
-	if (!atmel_default_console_device)
-		printk(KERN_INFO "AT91: No default serial console defined.\n");
 }
 #else
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-void __init at91_set_serial_console(unsigned portnr) {}
 void __init at91_add_device_serial(void) {}
 #endif
 
@@ -1366,6 +1343,93 @@ void __init at91_add_device_cf(struct at91_cf_data *data)
 void __init at91_add_device_cf(struct at91_cf_data * data) {}
 #endif
 
+/* --------------------------------------------------------------------
+ *  ADCs
+ * -------------------------------------------------------------------- */
+
+#if IS_ENABLED(CONFIG_AT91_ADC)
+static struct at91_adc_data adc_data;
+
+static struct resource adc_resources[] = {
+	[0] = {
+		.start	= AT91SAM9260_BASE_ADC,
+		.end	= AT91SAM9260_BASE_ADC + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9260_ID_ADC,
+		.end	= AT91SAM9260_ID_ADC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91_adc_device = {
+	.name		= "at91_adc",
+	.id		= -1,
+	.dev		= {
+				.platform_data		= &adc_data,
+	},
+	.resource	= adc_resources,
+	.num_resources	= ARRAY_SIZE(adc_resources),
+};
+
+static struct at91_adc_trigger at91_adc_triggers[] = {
+	[0] = {
+		.name = "timer-counter-0",
+		.value = AT91_ADC_TRGSEL_TC0 | AT91_ADC_TRGEN,
+	},
+	[1] = {
+		.name = "timer-counter-1",
+		.value = AT91_ADC_TRGSEL_TC1 | AT91_ADC_TRGEN,
+	},
+	[2] = {
+		.name = "timer-counter-2",
+		.value = AT91_ADC_TRGSEL_TC2 | AT91_ADC_TRGEN,
+	},
+	[3] = {
+		.name = "external",
+		.value = AT91_ADC_TRGSEL_EXTERNAL | AT91_ADC_TRGEN,
+		.is_external = true,
+	},
+};
+
+static struct at91_adc_reg_desc at91_adc_register_g20 = {
+	.channel_base = AT91_ADC_CHR(0),
+	.drdy_mask = AT91_ADC_DRDY,
+	.status_register = AT91_ADC_SR,
+	.trigger_register = AT91_ADC_MR,
+};
+
+void __init at91_add_device_adc(struct at91_adc_data *data)
+{
+	if (!data)
+		return;
+
+	if (test_bit(0, &data->channels_used))
+		at91_set_A_periph(AT91_PIN_PC0, 0);
+	if (test_bit(1, &data->channels_used))
+		at91_set_A_periph(AT91_PIN_PC1, 0);
+	if (test_bit(2, &data->channels_used))
+		at91_set_A_periph(AT91_PIN_PC2, 0);
+	if (test_bit(3, &data->channels_used))
+		at91_set_A_periph(AT91_PIN_PC3, 0);
+
+	if (data->use_external_triggers)
+		at91_set_A_periph(AT91_PIN_PA22, 0);
+
+	data->num_channels = 4;
+	data->startup_time = 10;
+	data->registers = &at91_adc_register_g20;
+	data->trigger_number = 4;
+	data->trigger_list = at91_adc_triggers;
+
+	adc_data = *data;
+	platform_device_register(&at91_adc_device);
+}
+#else
+void __init at91_add_device_adc(struct at91_adc_data *data) {}
+#endif
+
 /* -------------------------------------------------------------------- */
 /*
  * These devices are always present and don't need any board-specific
@@ -1373,6 +1437,9 @@ void __init at91_add_device_cf(struct at91_cf_data * data) {}
  */
 static int __init at91_add_standard_devices(void)
 {
+	if (of_have_populated_dt())
+		return 0;
+
 	at91_add_device_rtt();
 	at91_add_device_watchdog();
 	at91_add_device_tc();
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index 7de81e6222f1..c77d503d09d1 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -239,18 +239,6 @@ static void __init at91sam9261_register_clocks(void)
 	clk_register(&hck1);
 }
 
-static struct clk_lookup console_clock_lookup;
-
-void __init at91sam9261_set_console_clock(int id)
-{
-	if (id >= ARRAY_SIZE(usart_clocks_lookups))
-		return;
-
-	console_clock_lookup.con_id = "usart";
-	console_clock_lookup.clk = usart_clocks_lookups[id].clk;
-	clkdev_add(&console_clock_lookup);
-}
-
 /* --------------------------------------------------------------------
  *  GPIO
  * -------------------------------------------------------------------- */
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 096da87dc00d..9295e90b08ff 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -415,6 +415,9 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 		else
 			cs_pin = spi1_standard_cs[devices[i].chip_select];
 
+		if (!gpio_is_valid(cs_pin))
+			continue;
+
 		if (devices[i].bus_num == 0)
 			enable_spi0 = 1;
 		else
@@ -1048,14 +1051,6 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 		at91_uarts[portnr] = pdev;
 }
 
-void __init at91_set_serial_console(unsigned portnr)
-{
-	if (portnr < ATMEL_MAX_UART) {
-		atmel_default_console_device = at91_uarts[portnr];
-		at91sam9261_set_console_clock(at91_uarts[portnr]->id);
-	}
-}
-
 void __init at91_add_device_serial(void)
 {
 	int i;
@@ -1064,13 +1059,9 @@ void __init at91_add_device_serial(void)
 		if (at91_uarts[i])
 			platform_device_register(at91_uarts[i]);
 	}
-
-	if (!atmel_default_console_device)
-		printk(KERN_INFO "AT91: No default serial console defined.\n");
 }
 #else
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-void __init at91_set_serial_console(unsigned portnr) {}
 void __init at91_add_device_serial(void) {}
 #endif
 
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index ef301be66575..ed91c7e9f7c2 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -199,6 +199,16 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	CLKDEV_CON_ID("pioC", &pioCDE_clk),
 	CLKDEV_CON_ID("pioD", &pioCDE_clk),
 	CLKDEV_CON_ID("pioE", &pioCDE_clk),
+	/* more usart lookup table for DT entries */
+	CLKDEV_CON_DEV_ID("usart", "ffffee00.serial", &mck),
+	CLKDEV_CON_DEV_ID("usart", "fff8c000.serial", &usart0_clk),
+	CLKDEV_CON_DEV_ID("usart", "fff90000.serial", &usart1_clk),
+	CLKDEV_CON_DEV_ID("usart", "fff94000.serial", &usart2_clk),
+	/* more tc lookup table for DT entries */
+	CLKDEV_CON_DEV_ID("t0_clk", "fff7c000.timer", &tcb_clk),
+	CLKDEV_CON_DEV_ID("hclk", "a00000.ohci", &ohci_clk),
+	CLKDEV_CON_DEV_ID("spi_clk", "fffa4000.spi", &spi0_clk),
+	CLKDEV_CON_DEV_ID("spi_clk", "fffa8000.spi", &spi1_clk),
 };
 
 static struct clk_lookup usart_clocks_lookups[] = {
@@ -255,18 +265,6 @@ static void __init at91sam9263_register_clocks(void)
 	clk_register(&pck3);
 }
 
-static struct clk_lookup console_clock_lookup;
-
-void __init at91sam9263_set_console_clock(int id)
-{
-	if (id >= ARRAY_SIZE(usart_clocks_lookups))
-		return;
-
-	console_clock_lookup.con_id = "usart";
-	console_clock_lookup.clk = usart_clocks_lookups[id].clk;
-	clkdev_add(&console_clock_lookup);
-}
-
 /* --------------------------------------------------------------------
  *  GPIO
  * -------------------------------------------------------------------- */
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index 53688c46f956..175e0009eaa9 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -72,7 +72,8 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data)
 	/* Enable VBus control for UHP ports */
 	for (i = 0; i < data->ports; i++) {
 		if (gpio_is_valid(data->vbus_pin[i]))
-			at91_set_gpio_output(data->vbus_pin[i], 0);
+			at91_set_gpio_output(data->vbus_pin[i],
+					     data->vbus_pin_active_low[i]);
 	}
 
 	/* Enable overcurrent notification */
@@ -671,6 +672,9 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 		else
 			cs_pin = spi1_standard_cs[devices[i].chip_select];
 
+		if (!gpio_is_valid(cs_pin))
+			continue;
+
 		if (devices[i].bus_num == 0)
 			enable_spi0 = 1;
 		else
@@ -949,8 +953,25 @@ static struct platform_device at91sam9263_tcb_device = {
 	.num_resources	= ARRAY_SIZE(tcb_resources),
 };
 
+#if defined(CONFIG_OF)
+static struct of_device_id tcb_ids[] = {
+	{ .compatible = "atmel,at91rm9200-tcb" },
+	{ /*sentinel*/ }
+};
+#endif
+
 static void __init at91_add_device_tc(void)
 {
+#if defined(CONFIG_OF)
+	struct device_node *np;
+
+	np = of_find_matching_node(NULL, tcb_ids);
+	if (np) {
+		of_node_put(np);
+		return;
+	}
+#endif
+
 	platform_device_register(&at91sam9263_tcb_device);
 }
 #else
@@ -1457,14 +1478,6 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 		at91_uarts[portnr] = pdev;
 }
 
-void __init at91_set_serial_console(unsigned portnr)
-{
-	if (portnr < ATMEL_MAX_UART) {
-		atmel_default_console_device = at91_uarts[portnr];
-		at91sam9263_set_console_clock(at91_uarts[portnr]->id);
-	}
-}
-
 void __init at91_add_device_serial(void)
 {
 	int i;
@@ -1473,13 +1486,9 @@ void __init at91_add_device_serial(void)
 		if (at91_uarts[i])
 			platform_device_register(at91_uarts[i]);
 	}
-
-	if (!atmel_default_console_device)
-		printk(KERN_INFO "AT91: No default serial console defined.\n");
 }
 #else
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-void __init at91_set_serial_console(unsigned portnr) {}
 void __init at91_add_device_serial(void) {}
 #endif
 
@@ -1491,6 +1500,9 @@ void __init at91_add_device_serial(void) {}
  */
 static int __init at91_add_standard_devices(void)
 {
+	if (of_have_populated_dt())
+		return 0;
+
 	at91_add_device_rtt();
 	at91_add_device_watchdog();
 	at91_add_device_tc();
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index d222f8333dab..4792682d52b9 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -176,6 +176,12 @@ static struct clk vdec_clk = {
 	.type		= CLK_TYPE_PERIPHERAL,
 };
 
+static struct clk adc_op_clk = {
+	.name		= "adc_op_clk",
+	.type		= CLK_TYPE_PERIPHERAL,
+	.rate_hz	= 13200000,
+};
+
 static struct clk *periph_clocks[] __initdata = {
 	&pioA_clk,
 	&pioB_clk,
@@ -204,6 +210,7 @@ static struct clk *periph_clocks[] __initdata = {
 	&isi_clk,
 	&udphs_clk,
 	&mmc1_clk,
+	&adc_op_clk,
 	// irq0
 };
 
@@ -242,6 +249,8 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	CLKDEV_CON_ID("pioC", &pioC_clk),
 	CLKDEV_CON_ID("pioD", &pioDE_clk),
 	CLKDEV_CON_ID("pioE", &pioDE_clk),
+	/* Fake adc clock */
+	CLKDEV_CON_ID("adc_clk", &tsc_clk),
 };
 
 static struct clk_lookup usart_clocks_lookups[] = {
@@ -288,18 +297,6 @@ static void __init at91sam9g45_register_clocks(void)
 	clk_register(&pck1);
 }
 
-static struct clk_lookup console_clock_lookup;
-
-void __init at91sam9g45_set_console_clock(int id)
-{
-	if (id >= ARRAY_SIZE(usart_clocks_lookups))
-		return;
-
-	console_clock_lookup.con_id = "usart";
-	console_clock_lookup.clk = usart_clocks_lookups[id].clk;
-	clkdev_add(&console_clock_lookup);
-}
-
 /* --------------------------------------------------------------------
  *  GPIO
  * -------------------------------------------------------------------- */
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 698479f1e197..933fc9afe7d0 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -19,9 +19,12 @@
 #include <linux/i2c-gpio.h>
 #include <linux/atmel-mci.h>
 
+#include <linux/platform_data/at91_adc.h>
+
 #include <linux/fb.h>
 #include <video/atmel_lcdc.h>
 
+#include <mach/at91_adc.h>
 #include <mach/board.h>
 #include <mach/at91sam9g45.h>
 #include <mach/at91sam9g45_matrix.h>
@@ -69,15 +72,7 @@ static struct platform_device at_hdmac_device = {
 
 void __init at91_add_device_hdmac(void)
 {
-#if defined(CONFIG_OF)
-	struct device_node *of_node =
-		of_find_node_by_name(NULL, "dma-controller");
-
-	if (of_node)
-		of_node_put(of_node);
-	else
-#endif
-		platform_device_register(&at_hdmac_device);
+	platform_device_register(&at_hdmac_device);
 }
 #else
 void __init at91_add_device_hdmac(void) {}
@@ -127,12 +122,13 @@ void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data)
 	/* Enable VBus control for UHP ports */
 	for (i = 0; i < data->ports; i++) {
 		if (gpio_is_valid(data->vbus_pin[i]))
-			at91_set_gpio_output(data->vbus_pin[i], 0);
+			at91_set_gpio_output(data->vbus_pin[i],
+					     data->vbus_pin_active_low[i]);
 	}
 
 	/* Enable overcurrent notification */
 	for (i = 0; i < data->ports; i++) {
-		if (data->overcurrent_pin[i])
+		if (gpio_is_valid(data->overcurrent_pin[i]))
 			at91_set_gpio_input(data->overcurrent_pin[i], 1);
 	}
 
@@ -188,7 +184,8 @@ void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data)
 	/* Enable VBus control for UHP ports */
 	for (i = 0; i < data->ports; i++) {
 		if (gpio_is_valid(data->vbus_pin[i]))
-			at91_set_gpio_output(data->vbus_pin[i], 0);
+			at91_set_gpio_output(data->vbus_pin[i],
+					     data->vbus_pin_active_low[i]);
 	}
 
 	usbh_ehci_data = *data;
@@ -439,7 +436,6 @@ void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
 	atslave->dma_dev = &at_hdmac_device.dev;
 	atslave->cfg = ATC_FIFOCFG_HALFFIFO
 			| ATC_SRC_H2SEL_HW | ATC_DST_H2SEL_HW;
-	atslave->ctrla = ATC_SCSIZE_16 | ATC_DCSIZE_16;
 	if (mmc_id == 0)	/* MCI0 */
 		atslave->cfg |= ATC_SRC_PER(AT_DMA_ID_MCI0)
 			      | ATC_DST_PER(AT_DMA_ID_MCI0);
@@ -785,6 +781,9 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 		else
 			cs_pin = spi1_standard_cs[devices[i].chip_select];
 
+		if (!gpio_is_valid(cs_pin))
+			continue;
+
 		if (devices[i].bus_num == 0)
 			enable_spi0 = 1;
 		else
@@ -1089,25 +1088,8 @@ static struct platform_device at91sam9g45_tcb1_device = {
 	.num_resources	= ARRAY_SIZE(tcb1_resources),
 };
 
-#if defined(CONFIG_OF)
-static struct of_device_id tcb_ids[] = {
-	{ .compatible = "atmel,at91rm9200-tcb" },
-	{ /*sentinel*/ }
-};
-#endif
-
 static void __init at91_add_device_tc(void)
 {
-#if defined(CONFIG_OF)
-	struct device_node *np;
-
-	np = of_find_matching_node(NULL, tcb_ids);
-	if (np) {
-		of_node_put(np);
-		return;
-	}
-#endif
-
 	platform_device_register(&at91sam9g45_tcb0_device);
 	platform_device_register(&at91sam9g45_tcb1_device);
 }
@@ -1202,6 +1184,104 @@ void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) {}
 
 
 /* --------------------------------------------------------------------
+ *  ADC
+ * -------------------------------------------------------------------- */
+
+#if IS_ENABLED(CONFIG_AT91_ADC)
+static struct at91_adc_data adc_data;
+
+static struct resource adc_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_TSC,
+		.end	= AT91SAM9G45_BASE_TSC + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_TSC,
+		.end	= AT91SAM9G45_ID_TSC,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device at91_adc_device = {
+	.name		= "at91_adc",
+	.id		= -1,
+	.dev		= {
+				.platform_data	= &adc_data,
+	},
+	.resource	= adc_resources,
+	.num_resources	= ARRAY_SIZE(adc_resources),
+};
+
+static struct at91_adc_trigger at91_adc_triggers[] = {
+	[0] = {
+		.name = "external-rising",
+		.value = 1,
+		.is_external = true,
+	},
+	[1] = {
+		.name = "external-falling",
+		.value = 2,
+		.is_external = true,
+	},
+	[2] = {
+		.name = "external-any",
+		.value = 3,
+		.is_external = true,
+	},
+	[3] = {
+		.name = "continuous",
+		.value = 6,
+		.is_external = false,
+	},
+};
+
+static struct at91_adc_reg_desc at91_adc_register_g45 = {
+	.channel_base = AT91_ADC_CHR(0),
+	.drdy_mask = AT91_ADC_DRDY,
+	.status_register = AT91_ADC_SR,
+	.trigger_register = 0x08,
+};
+
+void __init at91_add_device_adc(struct at91_adc_data *data)
+{
+	if (!data)
+		return;
+
+	if (test_bit(0, &data->channels_used))
+		at91_set_gpio_input(AT91_PIN_PD20, 0);
+	if (test_bit(1, &data->channels_used))
+		at91_set_gpio_input(AT91_PIN_PD21, 0);
+	if (test_bit(2, &data->channels_used))
+		at91_set_gpio_input(AT91_PIN_PD22, 0);
+	if (test_bit(3, &data->channels_used))
+		at91_set_gpio_input(AT91_PIN_PD23, 0);
+	if (test_bit(4, &data->channels_used))
+		at91_set_gpio_input(AT91_PIN_PD24, 0);
+	if (test_bit(5, &data->channels_used))
+		at91_set_gpio_input(AT91_PIN_PD25, 0);
+	if (test_bit(6, &data->channels_used))
+		at91_set_gpio_input(AT91_PIN_PD26, 0);
+	if (test_bit(7, &data->channels_used))
+		at91_set_gpio_input(AT91_PIN_PD27, 0);
+
+	if (data->use_external_triggers)
+		at91_set_A_periph(AT91_PIN_PD28, 0);
+
+	data->num_channels = 8;
+	data->startup_time = 40;
+	data->registers = &at91_adc_register_g45;
+	data->trigger_number = 4;
+	data->trigger_list = at91_adc_triggers;
+
+	adc_data = *data;
+	platform_device_register(&at91_adc_device);
+}
+#else
+void __init at91_add_device_adc(struct at91_adc_data *data) {}
+#endif
+
+/* --------------------------------------------------------------------
  *  RTT
  * -------------------------------------------------------------------- */
 
@@ -1736,14 +1816,6 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 		at91_uarts[portnr] = pdev;
 }
 
-void __init at91_set_serial_console(unsigned portnr)
-{
-	if (portnr < ATMEL_MAX_UART) {
-		atmel_default_console_device = at91_uarts[portnr];
-		at91sam9g45_set_console_clock(at91_uarts[portnr]->id);
-	}
-}
-
 void __init at91_add_device_serial(void)
 {
 	int i;
@@ -1752,13 +1824,9 @@ void __init at91_add_device_serial(void)
 		if (at91_uarts[i])
 			platform_device_register(at91_uarts[i]);
 	}
-
-	if (!atmel_default_console_device)
-		printk(KERN_INFO "AT91: No default serial console defined.\n");
 }
 #else
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-void __init at91_set_serial_console(unsigned portnr) {}
 void __init at91_add_device_serial(void) {}
 #endif
 
@@ -1770,6 +1838,9 @@ void __init at91_add_device_serial(void) {}
  */
 static int __init at91_add_standard_devices(void)
 {
+	if (of_have_populated_dt())
+		return 0;
+
 	at91_add_device_hdmac();
 	at91_add_device_rtc();
 	at91_add_device_rtt();
diff --git a/arch/arm/mach-at91/at91sam9n12.c b/arch/arm/mach-at91/at91sam9n12.c
new file mode 100644
index 000000000000..08494664ab78
--- /dev/null
+++ b/arch/arm/mach-at91/at91sam9n12.c
@@ -0,0 +1,233 @@
+/*
+ * SoC specific setup code for the AT91SAM9N12
+ *
+ * Copyright (C) 2012 Atmel Corporation.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <mach/at91sam9n12.h>
+#include <mach/at91_pmc.h>
+#include <mach/cpu.h>
+#include <mach/board.h>
+
+#include "soc.h"
+#include "generic.h"
+#include "clock.h"
+#include "sam9_smc.h"
+
+/* --------------------------------------------------------------------
+ *  Clocks
+ * -------------------------------------------------------------------- */
+
+/*
+ * The peripheral clocks.
+ */
+static struct clk pioAB_clk = {
+	.name		= "pioAB_clk",
+	.pmc_mask	= 1 << AT91SAM9N12_ID_PIOAB,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioCD_clk = {
+	.name		= "pioCD_clk",
+	.pmc_mask	= 1 << AT91SAM9N12_ID_PIOCD,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart0_clk = {
+	.name		= "usart0_clk",
+	.pmc_mask	= 1 << AT91SAM9N12_ID_USART0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart1_clk = {
+	.name		= "usart1_clk",
+	.pmc_mask	= 1 << AT91SAM9N12_ID_USART1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart2_clk = {
+	.name		= "usart2_clk",
+	.pmc_mask	= 1 << AT91SAM9N12_ID_USART2,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart3_clk = {
+	.name		= "usart3_clk",
+	.pmc_mask	= 1 << AT91SAM9N12_ID_USART3,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi0_clk = {
+	.name		= "twi0_clk",
+	.pmc_mask	= 1 << AT91SAM9N12_ID_TWI0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi1_clk = {
+	.name		= "twi1_clk",
+	.pmc_mask	= 1 << AT91SAM9N12_ID_TWI1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc_clk = {
+	.name		= "mci_clk",
+	.pmc_mask	= 1 << AT91SAM9N12_ID_MCI,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi0_clk = {
+	.name		= "spi0_clk",
+	.pmc_mask	= 1 << AT91SAM9N12_ID_SPI0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi1_clk = {
+	.name		= "spi1_clk",
+	.pmc_mask	= 1 << AT91SAM9N12_ID_SPI1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk uart0_clk = {
+	.name		= "uart0_clk",
+	.pmc_mask	= 1 << AT91SAM9N12_ID_UART0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk uart1_clk = {
+	.name		= "uart1_clk",
+	.pmc_mask	= 1 << AT91SAM9N12_ID_UART1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tcb_clk = {
+	.name		= "tcb_clk",
+	.pmc_mask	= 1 << AT91SAM9N12_ID_TCB,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pwm_clk = {
+	.name		= "pwm_clk",
+	.pmc_mask	= 1 << AT91SAM9N12_ID_PWM,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk adc_clk = {
+	.name		= "adc_clk",
+	.pmc_mask	= 1 << AT91SAM9N12_ID_ADC,
+	.type	= CLK_TYPE_PERIPHERAL,
+};
+static struct clk dma_clk = {
+	.name		= "dma_clk",
+	.pmc_mask	= 1 << AT91SAM9N12_ID_DMA,
+	.type	= CLK_TYPE_PERIPHERAL,
+};
+static struct clk uhp_clk = {
+	.name		= "uhp",
+	.pmc_mask	= 1 << AT91SAM9N12_ID_UHP,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk udp_clk = {
+	.name		= "udp_clk",
+	.pmc_mask	= 1 << AT91SAM9N12_ID_UDP,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk lcdc_clk = {
+	.name		= "lcdc_clk",
+	.pmc_mask	= 1 << AT91SAM9N12_ID_LCDC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk ssc_clk = {
+	.name		= "ssc_clk",
+	.pmc_mask	= 1 << AT91SAM9N12_ID_SSC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+
+static struct clk *periph_clocks[] __initdata = {
+	&pioAB_clk,
+	&pioCD_clk,
+	&usart0_clk,
+	&usart1_clk,
+	&usart2_clk,
+	&usart3_clk,
+	&twi0_clk,
+	&twi1_clk,
+	&mmc_clk,
+	&spi0_clk,
+	&spi1_clk,
+	&lcdc_clk,
+	&uart0_clk,
+	&uart1_clk,
+	&tcb_clk,
+	&pwm_clk,
+	&adc_clk,
+	&dma_clk,
+	&uhp_clk,
+	&udp_clk,
+	&ssc_clk,
+};
+
+static struct clk_lookup periph_clocks_lookups[] = {
+	/* lookup table for DT entries */
+	CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck),
+	CLKDEV_CON_DEV_ID("usart", "f801c000.serial", &usart0_clk),
+	CLKDEV_CON_DEV_ID("usart", "f8020000.serial", &usart1_clk),
+	CLKDEV_CON_DEV_ID("usart", "f8024000.serial", &usart2_clk),
+	CLKDEV_CON_DEV_ID("usart", "f8028000.serial", &usart3_clk),
+	CLKDEV_CON_DEV_ID("t0_clk", "f8008000.timer", &tcb_clk),
+	CLKDEV_CON_DEV_ID("t0_clk", "f800c000.timer", &tcb_clk),
+	CLKDEV_CON_DEV_ID("dma_clk", "ffffec00.dma-controller", &dma_clk),
+	CLKDEV_CON_ID("pioA", &pioAB_clk),
+	CLKDEV_CON_ID("pioB", &pioAB_clk),
+	CLKDEV_CON_ID("pioC", &pioCD_clk),
+	CLKDEV_CON_ID("pioD", &pioCD_clk),
+	/* additional fake clock for macb_hclk */
+	CLKDEV_CON_DEV_ID("hclk", "500000.ohci", &uhp_clk),
+	CLKDEV_CON_DEV_ID("ohci_clk", "500000.ohci", &uhp_clk),
+};
+
+/*
+ * The two programmable clocks.
+ * You must configure pin multiplexing to bring these signals out.
+ */
+static struct clk pck0 = {
+	.name		= "pck0",
+	.pmc_mask	= AT91_PMC_PCK0,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 0,
+};
+static struct clk pck1 = {
+	.name		= "pck1",
+	.pmc_mask	= AT91_PMC_PCK1,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 1,
+};
+
+static void __init at91sam9n12_register_clocks(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
+		clk_register(periph_clocks[i]);
+	clk_register(&pck0);
+	clk_register(&pck1);
+
+	clkdev_add_table(periph_clocks_lookups,
+			 ARRAY_SIZE(periph_clocks_lookups));
+
+}
+
+/* --------------------------------------------------------------------
+ *  AT91SAM9N12 processor initialization
+ * -------------------------------------------------------------------- */
+
+static void __init at91sam9n12_map_io(void)
+{
+	at91_init_sram(0, AT91SAM9N12_SRAM_BASE, AT91SAM9N12_SRAM_SIZE);
+}
+
+void __init at91sam9n12_initialize(void)
+{
+	at91_extern_irq = (1 << AT91SAM9N12_ID_IRQ0);
+
+	/* Register GPIO subsystem (using DT) */
+	at91_gpio_init(NULL, 0);
+}
+
+struct at91_init_soc __initdata at91sam9n12_soc = {
+	.map_io = at91sam9n12_map_io,
+	.register_clocks = at91sam9n12_register_clocks,
+	.init = at91sam9n12_initialize,
+};
diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c
index d9f2774f385e..e420085a57ef 100644
--- a/arch/arm/mach-at91/at91sam9rl.c
+++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -232,18 +232,6 @@ static void __init at91sam9rl_register_clocks(void)
 	clk_register(&pck1);
 }
 
-static struct clk_lookup console_clock_lookup;
-
-void __init at91sam9rl_set_console_clock(int id)
-{
-	if (id >= ARRAY_SIZE(usart_clocks_lookups))
-		return;
-
-	console_clock_lookup.con_id = "usart";
-	console_clock_lookup.clk = usart_clocks_lookups[id].clk;
-	clkdev_add(&console_clock_lookup);
-}
-
 /* --------------------------------------------------------------------
  *  GPIO
  * -------------------------------------------------------------------- */
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index eda72e83037d..9c0b1481a9a7 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -419,6 +419,9 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 		else
 			cs_pin = spi_standard_cs[devices[i].chip_select];
 
+		if (!gpio_is_valid(cs_pin))
+			continue;
+
 		/* enable chip-select pin */
 		at91_set_gpio_output(cs_pin, 1);
 
@@ -1189,14 +1192,6 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 		at91_uarts[portnr] = pdev;
 }
 
-void __init at91_set_serial_console(unsigned portnr)
-{
-	if (portnr < ATMEL_MAX_UART) {
-		atmel_default_console_device = at91_uarts[portnr];
-		at91sam9rl_set_console_clock(at91_uarts[portnr]->id);
-	}
-}
-
 void __init at91_add_device_serial(void)
 {
 	int i;
@@ -1205,13 +1200,9 @@ void __init at91_add_device_serial(void)
 		if (at91_uarts[i])
 			platform_device_register(at91_uarts[i]);
 	}
-
-	if (!atmel_default_console_device)
-		printk(KERN_INFO "AT91: No default serial console defined.\n");
 }
 #else
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-void __init at91_set_serial_console(unsigned portnr) {}
 void __init at91_add_device_serial(void) {}
 #endif
 
diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c
index b6831eeb7b76..1b144b4d3ce1 100644
--- a/arch/arm/mach-at91/at91sam9x5.c
+++ b/arch/arm/mach-at91/at91sam9x5.c
@@ -120,6 +120,11 @@ static struct clk adc_clk = {
 	.pmc_mask	= 1 << AT91SAM9X5_ID_ADC,
 	.type	= CLK_TYPE_PERIPHERAL,
 };
+static struct clk adc_op_clk = {
+	.name		= "adc_op_clk",
+	.type		= CLK_TYPE_PERIPHERAL,
+	.rate_hz	= 5000000,
+};
 static struct clk dma0_clk = {
 	.name		= "dma0_clk",
 	.pmc_mask	= 1 << AT91SAM9X5_ID_DMA0,
@@ -205,6 +210,7 @@ static struct clk *periph_clocks[] __initdata = {
 	&tcb0_clk,
 	&pwm_clk,
 	&adc_clk,
+	&adc_op_clk,
 	&dma0_clk,
 	&dma1_clk,
 	&uhphs_clk,
@@ -223,6 +229,8 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	CLKDEV_CON_DEV_ID("usart", "f8028000.serial", &usart3_clk),
 	CLKDEV_CON_DEV_ID("t0_clk", "f8008000.timer", &tcb0_clk),
 	CLKDEV_CON_DEV_ID("t0_clk", "f800c000.timer", &tcb0_clk),
+	CLKDEV_CON_DEV_ID("dma_clk", "ffffec00.dma-controller", &dma0_clk),
+	CLKDEV_CON_DEV_ID("dma_clk", "ffffee00.dma-controller", &dma1_clk),
 	CLKDEV_CON_ID("pioA", &pioAB_clk),
 	CLKDEV_CON_ID("pioB", &pioAB_clk),
 	CLKDEV_CON_ID("pioC", &pioCD_clk),
diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c
index 2628384aaae1..271f994314a4 100644
--- a/arch/arm/mach-at91/board-1arm.c
+++ b/arch/arm/mach-at91/board-1arm.c
@@ -47,20 +47,6 @@ static void __init onearm_init_early(void)
 
 	/* Initialize processor: 18.432 MHz crystal */
 	at91_initialize(18432000);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */
-	at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
-	/* USART1 on ttyS2 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS
-			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
-			   | ATMEL_UART_RI);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
 }
 
 static struct macb_platform_data __initdata onearm_eth_data = {
@@ -82,6 +68,16 @@ static struct at91_udc_data __initdata onearm_udc_data = {
 static void __init onearm_board_init(void)
 {
 	/* Serial */
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */
+	at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+	/* USART1 on ttyS2 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS
+			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+			   | ATMEL_UART_RI);
 	at91_add_device_serial();
 	/* Ethernet */
 	at91_add_device_eth(&onearm_eth_data);
diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c
index 161efbaa1029..b7d8aa7b81e6 100644
--- a/arch/arm/mach-at91/board-afeb-9260v1.c
+++ b/arch/arm/mach-at91/board-afeb-9260v1.c
@@ -52,22 +52,6 @@ static void __init afeb9260_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
 	at91_initialize(18432000);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	at91_register_uart(AT91SAM9260_ID_US0, 1,
-			     ATMEL_UART_CTS | ATMEL_UART_RTS
-			   | ATMEL_UART_DTR | ATMEL_UART_DSR
-			   | ATMEL_UART_DCD | ATMEL_UART_RI);
-
-	/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
-	at91_register_uart(AT91SAM9260_ID_US1, 2,
-			ATMEL_UART_CTS | ATMEL_UART_RTS);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
 }
 
 /*
@@ -183,6 +167,18 @@ static struct at91_cf_data afeb9260_cf_data = {
 static void __init afeb9260_board_init(void)
 {
 	/* Serial */
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91SAM9260_ID_US0, 1,
+			     ATMEL_UART_CTS | ATMEL_UART_RTS
+			   | ATMEL_UART_DTR | ATMEL_UART_DSR
+			   | ATMEL_UART_DCD | ATMEL_UART_RI);
+
+	/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
+	at91_register_uart(AT91SAM9260_ID_US1, 2,
+			ATMEL_UART_CTS | ATMEL_UART_RTS);
 	at91_add_device_serial();
 	/* USB Host */
 	at91_add_device_usbh(&afeb9260_usbh_data);
diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c
index c6d44ee0c77e..29d3ef0a50fb 100644
--- a/arch/arm/mach-at91/board-cam60.c
+++ b/arch/arm/mach-at91/board-cam60.c
@@ -49,12 +49,6 @@ static void __init cam60_init_early(void)
 {
 	/* Initialize processor: 10 MHz crystal */
 	at91_initialize(10000000);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
 }
 
 /*
@@ -175,6 +169,8 @@ static void __init cam60_add_device_nand(void)
 static void __init cam60_board_init(void)
 {
 	/* Serial */
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
 	at91_add_device_serial();
 	/* SPI */
 	at91_add_device_spi(cam60_spi_devices, ARRAY_SIZE(cam60_spi_devices));
diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c
index 59d9cf997537..44328a6d4609 100644
--- a/arch/arm/mach-at91/board-carmeva.c
+++ b/arch/arm/mach-at91/board-carmeva.c
@@ -44,17 +44,6 @@ static void __init carmeva_init_early(void)
 {
 	/* Initialize processor: 20.000 MHz crystal */
 	at91_initialize(20000000);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
-			   | ATMEL_UART_RI);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
 }
 
 static struct macb_platform_data __initdata carmeva_eth_data = {
@@ -139,6 +128,13 @@ static struct gpio_led carmeva_leds[] = {
 static void __init carmeva_board_init(void)
 {
 	/* Serial */
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+			   | ATMEL_UART_RI);
 	at91_add_device_serial();
 	/* Ethernet */
 	at91_add_device_eth(&carmeva_eth_data);
diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c
index 5f3680e7c883..69951ec7dbf3 100644
--- a/arch/arm/mach-at91/board-cpu9krea.c
+++ b/arch/arm/mach-at91/board-cpu9krea.c
@@ -52,34 +52,6 @@ static void __init cpu9krea_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
 	at91_initialize(18432000);
-
-	/* DGBU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS |
-		ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DSR |
-		ATMEL_UART_DCD | ATMEL_UART_RI);
-
-	/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
-	at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS |
-		ATMEL_UART_RTS);
-
-	/* USART2 on ttyS3. (Rx, Tx, RTS, CTS) */
-	at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS |
-		ATMEL_UART_RTS);
-
-	/* USART3 on ttyS4. (Rx, Tx) */
-	at91_register_uart(AT91SAM9260_ID_US3, 4, 0);
-
-	/* USART4 on ttyS5. (Rx, Tx) */
-	at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
-
-	/* USART5 on ttyS6. (Rx, Tx) */
-	at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
 }
 
 /*
@@ -352,6 +324,30 @@ static void __init cpu9krea_board_init(void)
 	/* NOR */
 	cpu9krea_add_device_nor();
 	/* Serial */
+	/* DGBU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS |
+		ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DSR |
+		ATMEL_UART_DCD | ATMEL_UART_RI);
+
+	/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
+	at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS |
+		ATMEL_UART_RTS);
+
+	/* USART2 on ttyS3. (Rx, Tx, RTS, CTS) */
+	at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS |
+		ATMEL_UART_RTS);
+
+	/* USART3 on ttyS4. (Rx, Tx) */
+	at91_register_uart(AT91SAM9260_ID_US3, 4, 0);
+
+	/* USART4 on ttyS5. (Rx, Tx) */
+	at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
+
+	/* USART5 on ttyS6. (Rx, Tx) */
+	at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
 	at91_add_device_serial();
 	/* USB Host */
 	at91_add_device_usbh(&cpu9krea_usbh_data);
diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c
index e094cc81fe25..895cf2dba612 100644
--- a/arch/arm/mach-at91/board-cpuat91.c
+++ b/arch/arm/mach-at91/board-cpuat91.c
@@ -59,28 +59,6 @@ static void __init cpuat91_init_early(void)
 
 	/* Initialize processor: 18.432 MHz crystal */
 	at91_initialize(18432000);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS) */
-	at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS |
-		ATMEL_UART_RTS);
-
-	/* USART1 on ttyS2. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS |
-		ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DSR |
-		ATMEL_UART_DCD | ATMEL_UART_RI);
-
-	/* USART2 on ttyS3 (Rx, Tx) */
-	at91_register_uart(AT91RM9200_ID_US2, 3, 0);
-
-	/* USART3 on ttyS4 (Rx, Tx, CTS, RTS) */
-	at91_register_uart(AT91RM9200_ID_US3, 4, ATMEL_UART_CTS |
-		ATMEL_UART_RTS);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
 }
 
 static struct macb_platform_data __initdata cpuat91_eth_data = {
@@ -161,6 +139,24 @@ static struct platform_device *platform_devices[] __initdata = {
 static void __init cpuat91_board_init(void)
 {
 	/* Serial */
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS) */
+	at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS |
+		ATMEL_UART_RTS);
+
+	/* USART1 on ttyS2. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS |
+		ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DSR |
+		ATMEL_UART_DCD | ATMEL_UART_RI);
+
+	/* USART2 on ttyS3 (Rx, Tx) */
+	at91_register_uart(AT91RM9200_ID_US2, 3, 0);
+
+	/* USART3 on ttyS4 (Rx, Tx, CTS, RTS) */
+	at91_register_uart(AT91RM9200_ID_US3, 4, ATMEL_UART_CTS |
+		ATMEL_UART_RTS);
 	at91_add_device_serial();
 	/* LEDs. */
 	at91_gpio_leds(cpuat91_leds, ARRAY_SIZE(cpuat91_leds));
diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
index 1a1547b1ce4e..cd813361cd26 100644
--- a/arch/arm/mach-at91/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -47,15 +47,6 @@ static void __init csb337_init_early(void)
 {
 	/* Initialize processor: 3.6864 MHz crystal */
 	at91_initialize(3686400);
-
-	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
-
-	/* DBGU on ttyS0 */
-	at91_register_uart(0, 0, 0);
-
-	/* make console=ttyS0 the default */
-	at91_set_serial_console(0);
 }
 
 static struct macb_platform_data __initdata csb337_eth_data = {
@@ -228,7 +219,11 @@ static struct gpio_led csb_leds[] = {
 
 static void __init csb337_board_init(void)
 {
+	/* Setup the LEDs */
+	at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
 	/* Serial */
+	/* DBGU on ttyS0 */
+	at91_register_uart(0, 0, 0);
 	at91_add_device_serial();
 	/* Ethernet */
 	at91_add_device_eth(&csb337_eth_data);
diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c
index f650bf39455d..7c8b05a57d7f 100644
--- a/arch/arm/mach-at91/board-csb637.c
+++ b/arch/arm/mach-at91/board-csb637.c
@@ -44,12 +44,6 @@ static void __init csb637_init_early(void)
 {
 	/* Initialize processor: 3.6864 MHz crystal */
 	at91_initialize(3686400);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* make console=ttyS0 (ie, DBGU) the default */
-	at91_set_serial_console(0);
 }
 
 static struct macb_platform_data __initdata csb637_eth_data = {
@@ -118,6 +112,8 @@ static void __init csb637_board_init(void)
 	/* LED(s) */
 	at91_gpio_leds(csb_leds, ARRAY_SIZE(csb_leds));
 	/* Serial */
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
 	at91_add_device_serial();
 	/* Ethernet */
 	at91_add_device_eth(&csb637_eth_data);
diff --git a/arch/arm/mach-at91/board-dt.c b/arch/arm/mach-at91/board-dt.c
index c18d4d307801..a1fce05aa7a5 100644
--- a/arch/arm/mach-at91/board-dt.c
+++ b/arch/arm/mach-at91/board-dt.c
@@ -1,10 +1,6 @@
 /*
  *  Setup code for AT91SAM Evaluation Kits with Device Tree support
  *
- *  Covers: * AT91SAM9G45-EKES  board
- *          * AT91SAM9M10-EKES  board
- *          * AT91SAM9M10G45-EK board
- *
  *  Copyright (C) 2011 Atmel,
  *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>
  *
@@ -49,9 +45,7 @@ static void __init at91_dt_device_init(void)
 }
 
 static const char *at91_dt_board_compat[] __initdata = {
-	"atmel,at91sam9m10g45ek",
-	"atmel,at91sam9x5ek",
-	"calao,usb-a9g20",
+	"atmel,at91sam9",
 	NULL
 };
 
diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c
index d302ca3eeb64..bd1017297989 100644
--- a/arch/arm/mach-at91/board-eb9200.c
+++ b/arch/arm/mach-at91/board-eb9200.c
@@ -44,20 +44,6 @@ static void __init eb9200_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
 	at91_initialize(18432000);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-			| ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
-			| ATMEL_UART_RI);
-
-	/* USART2 on ttyS2. (Rx, Tx) - IRDA */
-	at91_register_uart(AT91RM9200_ID_US2, 2, 0);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
 }
 
 static struct macb_platform_data __initdata eb9200_eth_data = {
@@ -101,6 +87,16 @@ static struct i2c_board_info __initdata eb9200_i2c_devices[] = {
 static void __init eb9200_board_init(void)
 {
 	/* Serial */
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+			| ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+			| ATMEL_UART_RI);
+
+	/* USART2 on ttyS2. (Rx, Tx) - IRDA */
+	at91_register_uart(AT91RM9200_ID_US2, 2, 0);
 	at91_add_device_serial();
 	/* Ethernet */
 	at91_add_device_eth(&eb9200_eth_data);
diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c
index 69966ce4d776..89cc3726a9ce 100644
--- a/arch/arm/mach-at91/board-ecbat91.c
+++ b/arch/arm/mach-at91/board-ecbat91.c
@@ -50,18 +50,6 @@ static void __init ecb_at91init_early(void)
 
 	/* Initialize processor: 18.432 MHz crystal */
 	at91_initialize(18432000);
-
-	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PC7, AT91_PIN_PC7);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 on ttyS1. (Rx & Tx only) */
-	at91_register_uart(AT91RM9200_ID_US0, 1, 0);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
 }
 
 static struct macb_platform_data __initdata ecb_at91eth_data = {
@@ -151,7 +139,15 @@ static struct spi_board_info __initdata ecb_at91spi_devices[] = {
 
 static void __init ecb_at91board_init(void)
 {
+	/* Setup the LEDs */
+	at91_init_leds(AT91_PIN_PC7, AT91_PIN_PC7);
+
 	/* Serial */
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1. (Rx & Tx only) */
+	at91_register_uart(AT91RM9200_ID_US0, 1, 0);
 	at91_add_device_serial();
 
 	/* Ethernet */
diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c
index f23aabef8551..558546cf63f4 100644
--- a/arch/arm/mach-at91/board-eco920.c
+++ b/arch/arm/mach-at91/board-eco920.c
@@ -37,15 +37,6 @@ static void __init eco920_init_early(void)
 	at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
 
 	at91_initialize(18432000);
-
-	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
-
-	/* DBGU on ttyS0. (Rx & Tx only */
-	at91_register_uart(0, 0, 0);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
 }
 
 static struct macb_platform_data __initdata eco920_eth_data = {
@@ -103,6 +94,10 @@ static struct spi_board_info eco920_spi_devices[] = {
 
 static void __init eco920_board_init(void)
 {
+	/* Setup the LEDs */
+	at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
+	/* DBGU on ttyS0. (Rx & Tx only */
+	at91_register_uart(0, 0, 0);
 	at91_add_device_serial();
 	at91_add_device_eth(&eco920_eth_data);
 	at91_add_device_usbh(&eco920_usbh_data);
diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c
index 1815152001f7..47658f78105d 100644
--- a/arch/arm/mach-at91/board-flexibity.c
+++ b/arch/arm/mach-at91/board-flexibity.c
@@ -41,12 +41,6 @@ static void __init flexibity_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
 	at91_initialize(18432000);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
 }
 
 /* USB Host port */
@@ -143,6 +137,8 @@ static struct gpio_led flexibity_leds[] = {
 static void __init flexibity_board_init(void)
 {
 	/* Serial */
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
 	at91_add_device_serial();
 	/* USB Host */
 	at91_add_device_usbh(&flexibity_usbh_data);
diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c
index caf017f0f4ee..33411e6ecb1f 100644
--- a/arch/arm/mach-at91/board-foxg20.c
+++ b/arch/arm/mach-at91/board-foxg20.c
@@ -61,44 +61,6 @@ static void __init foxg20_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
 	at91_initialize(18432000);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	at91_register_uart(AT91SAM9260_ID_US0, 1,
-				ATMEL_UART_CTS
-				| ATMEL_UART_RTS
-				| ATMEL_UART_DTR
-				| ATMEL_UART_DSR
-				| ATMEL_UART_DCD
-				| ATMEL_UART_RI);
-
-	/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
-	at91_register_uart(AT91SAM9260_ID_US1, 2,
-		ATMEL_UART_CTS
-		| ATMEL_UART_RTS);
-
-	/* USART2 on ttyS3. (Rx & Tx only) */
-	at91_register_uart(AT91SAM9260_ID_US2, 3, 0);
-
-	/* USART3 on ttyS4. (Rx, Tx, RTS, CTS) */
-	at91_register_uart(AT91SAM9260_ID_US3, 4,
-		ATMEL_UART_CTS
-		| ATMEL_UART_RTS);
-
-	/* USART4 on ttyS5. (Rx & Tx only) */
-	at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
-
-	/* USART5 on ttyS6. (Rx & Tx only) */
-	at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
-
-	/* Set the internal pull-up resistor on DRXD */
-	at91_set_A_periph(AT91_PIN_PB14, 1);
-
 }
 
 /*
@@ -241,6 +203,39 @@ static struct i2c_board_info __initdata foxg20_i2c_devices[] = {
 static void __init foxg20_board_init(void)
 {
 	/* Serial */
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91SAM9260_ID_US0, 1,
+				ATMEL_UART_CTS
+				| ATMEL_UART_RTS
+				| ATMEL_UART_DTR
+				| ATMEL_UART_DSR
+				| ATMEL_UART_DCD
+				| ATMEL_UART_RI);
+
+	/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
+	at91_register_uart(AT91SAM9260_ID_US1, 2,
+		ATMEL_UART_CTS
+		| ATMEL_UART_RTS);
+
+	/* USART2 on ttyS3. (Rx & Tx only) */
+	at91_register_uart(AT91SAM9260_ID_US2, 3, 0);
+
+	/* USART3 on ttyS4. (Rx, Tx, RTS, CTS) */
+	at91_register_uart(AT91SAM9260_ID_US3, 4,
+		ATMEL_UART_CTS
+		| ATMEL_UART_RTS);
+
+	/* USART4 on ttyS5. (Rx & Tx only) */
+	at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
+
+	/* USART5 on ttyS6. (Rx & Tx only) */
+	at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
+
+	/* Set the internal pull-up resistor on DRXD */
+	at91_set_A_periph(AT91_PIN_PB14, 1);
 	at91_add_device_serial();
 	/* USB Host */
 	at91_add_device_usbh(&foxg20_usbh_data);
diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c
index 230e71969fb7..3e0dfa643a86 100644
--- a/arch/arm/mach-at91/board-gsia18s.c
+++ b/arch/arm/mach-at91/board-gsia18s.c
@@ -41,38 +41,6 @@
 static void __init gsia18s_init_early(void)
 {
 	stamp9g20_init_early();
-
-	/*
-	 * USART0 on ttyS1 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI).
-	 * Used for Internal Analog Modem.
-	 */
-	at91_register_uart(AT91SAM9260_ID_US0, 1,
-				ATMEL_UART_CTS | ATMEL_UART_RTS |
-				ATMEL_UART_DTR | ATMEL_UART_DSR |
-				ATMEL_UART_DCD | ATMEL_UART_RI);
-	/*
-	 * USART1 on ttyS2 (Rx, Tx, CTS, RTS).
-	 * Used for GPS or WiFi or Data stream.
-	 */
-	at91_register_uart(AT91SAM9260_ID_US1, 2,
-				ATMEL_UART_CTS | ATMEL_UART_RTS);
-	/*
-	 * USART2 on ttyS3 (Rx, Tx, CTS, RTS).
-	 * Used for External Modem.
-	 */
-	at91_register_uart(AT91SAM9260_ID_US2, 3,
-				ATMEL_UART_CTS | ATMEL_UART_RTS);
-	/*
-	 * USART3 on ttyS4 (Rx, Tx, RTS).
-	 * Used for RS-485.
-	 */
-	at91_register_uart(AT91SAM9260_ID_US3, 4, ATMEL_UART_RTS);
-
-	/*
-	 * USART4 on ttyS5 (Rx, Tx).
-	 * Used for TRX433 Radio Module.
-	 */
-	at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
 }
 
 /*
@@ -558,6 +526,37 @@ static int __init gsia18s_power_off_init(void)
 
 static void __init gsia18s_board_init(void)
 {
+	/*
+	 * USART0 on ttyS1 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI).
+	 * Used for Internal Analog Modem.
+	 */
+	at91_register_uart(AT91SAM9260_ID_US0, 1,
+				ATMEL_UART_CTS | ATMEL_UART_RTS |
+				ATMEL_UART_DTR | ATMEL_UART_DSR |
+				ATMEL_UART_DCD | ATMEL_UART_RI);
+	/*
+	 * USART1 on ttyS2 (Rx, Tx, CTS, RTS).
+	 * Used for GPS or WiFi or Data stream.
+	 */
+	at91_register_uart(AT91SAM9260_ID_US1, 2,
+				ATMEL_UART_CTS | ATMEL_UART_RTS);
+	/*
+	 * USART2 on ttyS3 (Rx, Tx, CTS, RTS).
+	 * Used for External Modem.
+	 */
+	at91_register_uart(AT91SAM9260_ID_US2, 3,
+				ATMEL_UART_CTS | ATMEL_UART_RTS);
+	/*
+	 * USART3 on ttyS4 (Rx, Tx, RTS).
+	 * Used for RS-485.
+	 */
+	at91_register_uart(AT91SAM9260_ID_US3, 4, ATMEL_UART_RTS);
+
+	/*
+	 * USART4 on ttyS5 (Rx, Tx).
+	 * Used for TRX433 Radio Module.
+	 */
+	at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
 	stamp9g20_board_init();
 	at91_add_device_usbh(&usbh_data);
 	at91_add_device_udc(&udc_data);
diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c
index efde1b2327c8..f260657f32bc 100644
--- a/arch/arm/mach-at91/board-kafa.c
+++ b/arch/arm/mach-at91/board-kafa.c
@@ -47,18 +47,6 @@ static void __init kafa_init_early(void)
 
 	/* Initialize processor: 18.432 MHz crystal */
 	at91_initialize(18432000);
-
-	/* Set up the LEDs */
-	at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */
-	at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
 }
 
 static struct macb_platform_data __initdata kafa_eth_data = {
@@ -79,7 +67,15 @@ static struct at91_udc_data __initdata kafa_udc_data = {
 
 static void __init kafa_board_init(void)
 {
+	/* Set up the LEDs */
+	at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4);
+
 	/* Serial */
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */
+	at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
 	at91_add_device_serial();
 	/* Ethernet */
 	at91_add_device_eth(&kafa_eth_data);
diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
index 59b92aab9bcf..ba39db5482b9 100644
--- a/arch/arm/mach-at91/board-kb9202.c
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -50,24 +50,6 @@ static void __init kb9202_init_early(void)
 
 	/* Initialize processor: 10 MHz crystal */
 	at91_initialize(10000000);
-
-	/* Set up the LEDs */
-	at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 on ttyS1 (Rx & Tx only) */
-	at91_register_uart(AT91RM9200_ID_US0, 1, 0);
-
-	/* USART1 on ttyS2 (Rx & Tx only) - IRDA (optional) */
-	at91_register_uart(AT91RM9200_ID_US1, 2, 0);
-
-	/* USART3 on ttyS3 (Rx, Tx, CTS, RTS) - RS485 (optional) */
-	at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
 }
 
 static struct macb_platform_data __initdata kb9202_eth_data = {
@@ -115,7 +97,21 @@ static struct atmel_nand_data __initdata kb9202_nand_data = {
 
 static void __init kb9202_board_init(void)
 {
+	/* Set up the LEDs */
+	at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18);
+
 	/* Serial */
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1 (Rx & Tx only) */
+	at91_register_uart(AT91RM9200_ID_US0, 1, 0);
+
+	/* USART1 on ttyS2 (Rx & Tx only) - IRDA (optional) */
+	at91_register_uart(AT91RM9200_ID_US1, 2, 0);
+
+	/* USART3 on ttyS3 (Rx, Tx, CTS, RTS) - RS485 (optional) */
+	at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
 	at91_add_device_serial();
 	/* Ethernet */
 	at91_add_device_eth(&kb9202_eth_data);
diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c
index 57d5f6a4726a..d2f4cc161766 100644
--- a/arch/arm/mach-at91/board-neocore926.c
+++ b/arch/arm/mach-at91/board-neocore926.c
@@ -55,15 +55,6 @@ static void __init neocore926_init_early(void)
 {
 	/* Initialize processor: 20 MHz crystal */
 	at91_initialize(20000000);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 on ttyS1. (Rx, Tx, RTS, CTS) */
-	at91_register_uart(AT91SAM9263_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
 }
 
 /*
@@ -341,6 +332,11 @@ static struct ac97c_platform_data neocore926_ac97_data = {
 static void __init neocore926_board_init(void)
 {
 	/* Serial */
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1. (Rx, Tx, RTS, CTS) */
+	at91_register_uart(AT91SAM9263_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
 	at91_add_device_serial();
 
 	/* USB Host */
diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c
index b4a12fc184c8..7fe638342421 100644
--- a/arch/arm/mach-at91/board-pcontrol-g20.c
+++ b/arch/arm/mach-at91/board-pcontrol-g20.c
@@ -40,17 +40,6 @@
 static void __init pcontrol_g20_init_early(void)
 {
 	stamp9g20_init_early();
-
-	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS) piggyback  A2 */
-	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS
-						| ATMEL_UART_RTS);
-
-	/* USART1 on ttyS2. (Rx, Tx, CTS, RTS) isolated RS485  X5 */
-	at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS
-						| ATMEL_UART_RTS);
-
-	/* USART2 on ttyS3. (Rx, Tx)  9bit-Bus  Multidrop-mode  X4 */
-	at91_register_uart(AT91SAM9260_ID_US4, 3, 0);
 }
 
 static struct sam9_smc_config __initdata pcontrol_smc_config[2] = { {
@@ -199,6 +188,16 @@ static struct spi_board_info pcontrol_g20_spi_devices[] = {
 
 static void __init pcontrol_g20_board_init(void)
 {
+	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS) piggyback  A2 */
+	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS
+						| ATMEL_UART_RTS);
+
+	/* USART1 on ttyS2. (Rx, Tx, CTS, RTS) isolated RS485  X5 */
+	at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS
+						| ATMEL_UART_RTS);
+
+	/* USART2 on ttyS3. (Rx, Tx)  9bit-Bus  Multidrop-mode  X4 */
+	at91_register_uart(AT91SAM9260_ID_US4, 3, 0);
 	stamp9g20_board_init();
 	at91_add_device_usbh(&usbh_data);
 	at91_add_device_eth(&macb_data);
diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c
index 59e35dd14863..b45c0a5d5ca7 100644
--- a/arch/arm/mach-at91/board-picotux200.c
+++ b/arch/arm/mach-at91/board-picotux200.c
@@ -48,17 +48,6 @@ static void __init picotux200_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
 	at91_initialize(18432000);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-			  | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
-			  | ATMEL_UART_RI);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
 }
 
 static struct macb_platform_data __initdata picotux200_eth_data = {
@@ -106,6 +95,13 @@ static struct platform_device picotux200_flash = {
 static void __init picotux200_board_init(void)
 {
 	/* Serial */
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+			  | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+			  | ATMEL_UART_RI);
 	at91_add_device_serial();
 	/* Ethernet */
 	at91_add_device_eth(&picotux200_eth_data);
diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c
index b6ed5ed7081a..0c61bf0d272c 100644
--- a/arch/arm/mach-at91/board-qil-a9260.c
+++ b/arch/arm/mach-at91/board-qil-a9260.c
@@ -52,24 +52,6 @@ static void __init ek_init_early(void)
 {
 	/* Initialize processor: 12.000 MHz crystal */
 	at91_initialize(12000000);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
-			   | ATMEL_UART_RI);
-
-	/* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */
-	at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
-	/* USART2 on ttyS3. (Rx, Tx, CTS, RTS) */
-	at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
-	/* set serial console to ttyS1 (ie, USART0) */
-	at91_set_serial_console(1);
-
 }
 
 /*
@@ -235,6 +217,19 @@ static struct gpio_led ek_leds[] = {
 static void __init ek_board_init(void)
 {
 	/* Serial */
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+			   | ATMEL_UART_RI);
+
+	/* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */
+	at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+	/* USART2 on ttyS3. (Rx, Tx, CTS, RTS) */
+	at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
 	at91_add_device_serial();
 	/* USB Host */
 	at91_add_device_usbh(&ek_usbh_data);
diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c
index 01332aa538b2..afd7a4713766 100644
--- a/arch/arm/mach-at91/board-rm9200dk.c
+++ b/arch/arm/mach-at91/board-rm9200dk.c
@@ -50,20 +50,6 @@ static void __init dk_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
 	at91_initialize(18432000);
-
-	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
-			   | ATMEL_UART_RI);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
 }
 
 static struct macb_platform_data __initdata dk_eth_data = {
@@ -190,7 +176,17 @@ static struct gpio_led dk_leds[] = {
 
 static void __init dk_board_init(void)
 {
+	/* Setup the LEDs */
+	at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
+
 	/* Serial */
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+			   | ATMEL_UART_RI);
 	at91_add_device_serial();
 	/* Ethernet */
 	at91_add_device_eth(&dk_eth_data);
diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c
index 11cbaa8946fe..2b15b8adec4c 100644
--- a/arch/arm/mach-at91/board-rm9200ek.c
+++ b/arch/arm/mach-at91/board-rm9200ek.c
@@ -50,20 +50,6 @@ static void __init ek_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
 	at91_initialize(18432000);
-
-	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
-			   | ATMEL_UART_RI);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
 }
 
 static struct macb_platform_data __initdata ek_eth_data = {
@@ -117,7 +103,7 @@ static struct i2c_board_info __initdata ek_i2c_devices[] = {
 };
 
 #define EK_FLASH_BASE	AT91_CHIPSELECT_0
-#define EK_FLASH_SIZE	SZ_2M
+#define EK_FLASH_SIZE	SZ_8M
 
 static struct physmap_flash_data ek_flash_data = {
 	.width		= 2,
@@ -161,7 +147,17 @@ static struct gpio_led ek_leds[] = {
 
 static void __init ek_board_init(void)
 {
+	/* Setup the LEDs */
+	at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2);
+
 	/* Serial */
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+			   | ATMEL_UART_RI);
 	at91_add_device_serial();
 	/* Ethernet */
 	at91_add_device_eth(&ek_eth_data);
diff --git a/arch/arm/mach-at91/board-rsi-ews.c b/arch/arm/mach-at91/board-rsi-ews.c
index af0750fafa29..24ab9be7510f 100644
--- a/arch/arm/mach-at91/board-rsi-ews.c
+++ b/arch/arm/mach-at91/board-rsi-ews.c
@@ -35,26 +35,6 @@ static void __init rsi_ews_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
 	at91_initialize(18432000);
-
-	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PB6, AT91_PIN_PB9);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	/* This one is for debugging */
-	at91_register_uart(0, 0, 0);
-
-	/* USART1 on ttyS2. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	/* Dialin/-out modem interface */
-	at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS
-			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
-			   | ATMEL_UART_RI);
-
-	/* USART3 on ttyS4. (Rx, Tx, RTS) */
-	/* RS485 communication */
-	at91_register_uart(AT91RM9200_ID_US3, 4, ATMEL_UART_RTS);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
 }
 
 /*
@@ -204,7 +184,23 @@ static struct platform_device rsiews_nor_flash = {
  */
 static void __init rsi_ews_board_init(void)
 {
+	/* Setup the LEDs */
+	at91_init_leds(AT91_PIN_PB6, AT91_PIN_PB9);
+
 	/* Serial */
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	/* This one is for debugging */
+	at91_register_uart(0, 0, 0);
+
+	/* USART1 on ttyS2. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	/* Dialin/-out modem interface */
+	at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS
+			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+			   | ATMEL_UART_RI);
+
+	/* USART3 on ttyS4. (Rx, Tx, RTS) */
+	/* RS485 communication */
+	at91_register_uart(AT91RM9200_ID_US3, 4, ATMEL_UART_RTS);
 	at91_add_device_serial();
 	at91_set_gpio_output(AT91_PIN_PA21, 0);
 	/* Ethernet */
diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
index e8b116b6cba6..cdd21f2595d2 100644
--- a/arch/arm/mach-at91/board-sam9-l9260.c
+++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -48,23 +48,6 @@ static void __init ek_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
 	at91_initialize(18432000);
-
-	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PA9, AT91_PIN_PA6);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
-			   | ATMEL_UART_RI);
-
-	/* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */
-	at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
 }
 
 /*
@@ -184,7 +167,20 @@ static struct at91_mmc_data __initdata ek_mmc_data = {
 
 static void __init ek_board_init(void)
 {
+	/* Setup the LEDs */
+	at91_init_leds(AT91_PIN_PA9, AT91_PIN_PA6);
+
 	/* Serial */
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+			   | ATMEL_UART_RI);
+
+	/* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */
+	at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
 	at91_add_device_serial();
 	/* USB Host */
 	at91_add_device_usbh(&ek_usbh_data);
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index d5aec55b0eb4..7b3c3913551a 100644
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -54,20 +54,6 @@ static void __init ek_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
 	at91_initialize(18432000);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
-			   | ATMEL_UART_RI);
-
-	/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
-	at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
 }
 
 /*
@@ -320,6 +306,16 @@ static void __init ek_add_device_buttons(void) {}
 static void __init ek_board_init(void)
 {
 	/* Serial */
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+			   | ATMEL_UART_RI);
+
+	/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
+	at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
 	at91_add_device_serial();
 	/* USB Host */
 	at91_add_device_usbh(&ek_usbh_data);
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index c3f994462864..2736453821b0 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -58,15 +58,6 @@ static void __init ek_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
 	at91_initialize(18432000);
-
-	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PA13, AT91_PIN_PA14);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
 }
 
 /*
@@ -85,8 +76,6 @@ static struct resource dm9000_resource[] = {
 		.flags	= IORESOURCE_MEM
 	},
 	[2] = {
-		.start	= AT91_PIN_PC11,
-		.end	= AT91_PIN_PC11,
 		.flags	= IORESOURCE_IRQ
 			| IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE,
 	}
@@ -130,6 +119,8 @@ static struct sam9_smc_config __initdata dm9000_smc_config = {
 
 static void __init ek_add_device_dm9000(void)
 {
+	struct resource *r = &dm9000_resource[2];
+
 	/* Configure chip-select 2 (DM9000) */
 	sam9_smc_configure(0, 2, &dm9000_smc_config);
 
@@ -139,6 +130,7 @@ static void __init ek_add_device_dm9000(void)
 	/* Configure Interrupt pin as input, no pull-up */
 	at91_set_gpio_input(AT91_PIN_PC11, 0);
 
+	r->start = r->end = gpio_to_irq(AT91_PIN_PC11);
 	platform_device_register(&dm9000_device);
 }
 #else
@@ -576,7 +568,12 @@ static struct gpio_led ek_leds[] = {
 
 static void __init ek_board_init(void)
 {
+	/* Setup the LEDs */
+	at91_init_leds(AT91_PIN_PA13, AT91_PIN_PA14);
+
 	/* Serial */
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
 	at91_add_device_serial();
 	/* USB Host */
 	at91_add_device_usbh(&ek_usbh_data);
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 66f0ddf4b2ae..983cb98d2465 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -57,15 +57,6 @@ static void __init ek_init_early(void)
 {
 	/* Initialize processor: 16.367 MHz crystal */
 	at91_initialize(16367660);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 on ttyS1. (Rx, Tx, RTS, CTS) */
-	at91_register_uart(AT91SAM9263_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
 }
 
 /*
@@ -74,6 +65,7 @@ static void __init ek_init_early(void)
 static struct at91_usbh_data __initdata ek_usbh_data = {
 	.ports		= 2,
 	.vbus_pin	= { AT91_PIN_PA24, AT91_PIN_PA21 },
+	.vbus_pin_active_low = {1, 1},
 	.overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
@@ -411,6 +403,11 @@ static struct at91_can_data ek_can_data = {
 static void __init ek_board_init(void)
 {
 	/* Serial */
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1. (Rx, Tx, RTS, CTS) */
+	at91_register_uart(AT91SAM9263_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
 	at91_add_device_serial();
 	/* USB Host */
 	at91_add_device_usbh(&ek_usbh_data);
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index 8923ec9f5831..6860d3451100 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -32,6 +32,8 @@
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/consumer.h>
 
+#include <linux/platform_data/at91_adc.h>
+
 #include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -65,20 +67,6 @@ static void __init ek_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
 	at91_initialize(18432000);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
-			   | ATMEL_UART_RI);
-
-	/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
-	at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
 }
 
 /*
@@ -318,6 +306,16 @@ static void __init ek_add_device_buttons(void)
 static void __init ek_add_device_buttons(void) {}
 #endif
 
+/*
+ * ADCs
+ */
+
+static struct at91_adc_data ek_adc_data = {
+	.channels_used = BIT(0) | BIT(1) | BIT(2) | BIT(3),
+	.use_external_triggers = true,
+	.vref = 3300,
+};
+
 #if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
 static struct regulator_consumer_supply ek_audio_consumer_supplies[] = {
 	REGULATOR_SUPPLY("AVDD", "0-001b"),
@@ -372,6 +370,16 @@ static struct i2c_board_info __initdata ek_i2c_devices[] = {
 static void __init ek_board_init(void)
 {
 	/* Serial */
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+			   | ATMEL_UART_RI);
+
+	/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
+	at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
 	at91_add_device_serial();
 	/* USB Host */
 	at91_add_device_usbh(&ek_usbh_data);
@@ -393,6 +401,8 @@ static void __init ek_board_init(void)
 	ek_add_device_gpio_leds();
 	/* Push Buttons */
 	ek_add_device_buttons();
+	/* ADCs */
+	at91_add_device_adc(&ek_adc_data);
 	/* PCK0 provides MCLK to the WM8731 */
 	at91_set_B_periph(AT91_PIN_PC1, 0);
 	/* SSC (for WM8731) */
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index e1bea73e6b30..63163dc7df46 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -27,6 +27,8 @@
 #include <linux/atmel-mci.h>
 #include <linux/delay.h>
 
+#include <linux/platform_data/at91_adc.h>
+
 #include <mach/hardware.h>
 #include <video/atmel_lcdc.h>
 #include <media/soc_camera.h>
@@ -53,16 +55,6 @@ static void __init ek_init_early(void)
 {
 	/* Initialize processor: 12.000 MHz crystal */
 	at91_initialize(12000000);
-
-	/* DGBU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 not connected on the -EK board */
-	/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
-	at91_register_uart(AT91SAM9G45_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
 }
 
 /*
@@ -71,6 +63,7 @@ static void __init ek_init_early(void)
 static struct at91_usbh_data __initdata ek_usbh_hs_data = {
 	.ports		= 2,
 	.vbus_pin	= {AT91_PIN_PD1, AT91_PIN_PD3},
+	.vbus_pin_active_low = {1, 1},
 	.overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
@@ -314,6 +307,14 @@ static struct at91_tsadcc_data ek_tsadcc_data = {
 	.ts_sample_hold_time	= 0x0a,
 };
 
+/*
+ * ADCs
+ */
+static struct at91_adc_data ek_adc_data = {
+	.channels_used = BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) | BIT(5) | BIT(6) | BIT(7),
+	.use_external_triggers = true,
+	.vref = 3300,
+};
 
 /*
  * GPIO Buttons
@@ -456,6 +457,12 @@ static struct platform_device *devices[] __initdata = {
 static void __init ek_board_init(void)
 {
 	/* Serial */
+	/* DGBU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 not connected on the -EK board */
+	/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
+	at91_register_uart(AT91SAM9G45_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
 	at91_add_device_serial();
 	/* USB HS Host */
 	at91_add_device_usbh_ohci(&ek_usbh_hs_data);
@@ -479,6 +486,8 @@ static void __init ek_board_init(void)
 	at91_add_device_lcdc(&ek_lcdc_data);
 	/* Touch Screen */
 	at91_add_device_tsadcc(&ek_tsadcc_data);
+	/* ADC */
+	at91_add_device_adc(&ek_adc_data);
 	/* Push Buttons */
 	ek_add_device_buttons();
 	/* AC97 */
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index b109ce2ba864..be3239f13daa 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -42,15 +42,6 @@ static void __init ek_init_early(void)
 {
 	/* Initialize processor: 12.000 MHz crystal */
 	at91_initialize(12000000);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS) */
-	at91_register_uart(AT91SAM9RL_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
 }
 
 /*
@@ -296,6 +287,11 @@ static void __init ek_add_device_buttons(void) {}
 static void __init ek_board_init(void)
 {
 	/* Serial */
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS) */
+	at91_register_uart(AT91SAM9RL_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
 	at91_add_device_serial();
 	/* USB HS */
 	at91_add_device_usba(&ek_usba_udc_data);
diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c
index ebc9d01ce742..9d446f1bb45f 100644
--- a/arch/arm/mach-at91/board-snapper9260.c
+++ b/arch/arm/mach-at91/board-snapper9260.c
@@ -43,16 +43,6 @@
 static void __init snapper9260_init_early(void)
 {
 	at91_initialize(18432000);
-
-	/* Debug on ttyS0 */
-	at91_register_uart(0, 0, 0);
-	at91_set_serial_console(0);
-
-	at91_register_uart(AT91SAM9260_ID_US0, 1,
-			   ATMEL_UART_CTS | ATMEL_UART_RTS);
-	at91_register_uart(AT91SAM9260_ID_US1, 2,
-			   ATMEL_UART_CTS | ATMEL_UART_RTS);
-	at91_register_uart(AT91SAM9260_ID_US2, 3, 0);
 }
 
 static struct at91_usbh_data __initdata snapper9260_usbh_data = {
@@ -168,6 +158,14 @@ static void __init snapper9260_board_init(void)
 	snapper9260_i2c_isl1208.irq = gpio_to_irq(AT91_PIN_PA31);
 	i2c_register_board_info(0, &snapper9260_i2c_isl1208, 1);
 
+	/* Debug on ttyS0 */
+	at91_register_uart(0, 0, 0);
+
+	at91_register_uart(AT91SAM9260_ID_US0, 1,
+			   ATMEL_UART_CTS | ATMEL_UART_RTS);
+	at91_register_uart(AT91SAM9260_ID_US1, 2,
+			   ATMEL_UART_CTS | ATMEL_UART_RTS);
+	at91_register_uart(AT91SAM9260_ID_US2, 3, 0);
 	at91_add_device_serial();
 	at91_add_device_usbh(&snapper9260_usbh_data);
 	at91_add_device_udc(&snapper9260_udc_data);
diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c
index 7640049410a0..ee86f9d7ee72 100644
--- a/arch/arm/mach-at91/board-stamp9g20.c
+++ b/arch/arm/mach-at91/board-stamp9g20.c
@@ -36,44 +36,6 @@ void __init stamp9g20_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
 	at91_initialize(18432000);
-
-	/* DGBU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
-}
-
-static void __init stamp9g20evb_init_early(void)
-{
-	stamp9g20_init_early();
-
-	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-						| ATMEL_UART_DTR | ATMEL_UART_DSR
-						| ATMEL_UART_DCD | ATMEL_UART_RI);
-}
-
-static void __init portuxg20_init_early(void)
-{
-	stamp9g20_init_early();
-
-	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-						| ATMEL_UART_DTR | ATMEL_UART_DSR
-						| ATMEL_UART_DCD | ATMEL_UART_RI);
-
-	/* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */
-	at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
-	/* USART2 on ttyS3. (Rx, Tx, CTS, RTS) */
-	at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
-	/* USART4 on ttyS5. (Rx, Tx only) */
-	at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
-
-	/* USART5 on ttyS6. (Rx, Tx only) */
-	at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
 }
 
 /*
@@ -254,6 +216,8 @@ void add_w1(void)
 void __init stamp9g20_board_init(void)
 {
 	/* Serial */
+	/* DGBU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
 	at91_add_device_serial();
 	/* NAND */
 	add_device_nand();
@@ -269,6 +233,22 @@ void __init stamp9g20_board_init(void)
 
 static void __init portuxg20_board_init(void)
 {
+	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+						| ATMEL_UART_DTR | ATMEL_UART_DSR
+						| ATMEL_UART_DCD | ATMEL_UART_RI);
+
+	/* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */
+	at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+	/* USART2 on ttyS3. (Rx, Tx, CTS, RTS) */
+	at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+	/* USART4 on ttyS5. (Rx, Tx only) */
+	at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
+
+	/* USART5 on ttyS6. (Rx, Tx only) */
+	at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
 	stamp9g20_board_init();
 	/* USB Host */
 	at91_add_device_usbh(&usbh_data);
@@ -286,6 +266,10 @@ static void __init portuxg20_board_init(void)
 
 static void __init stamp9g20evb_board_init(void)
 {
+	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+						| ATMEL_UART_DTR | ATMEL_UART_DSR
+						| ATMEL_UART_DCD | ATMEL_UART_RI);
 	stamp9g20_board_init();
 	/* USB Host */
 	at91_add_device_usbh(&usbh_data);
@@ -303,7 +287,7 @@ MACHINE_START(PORTUXG20, "taskit PortuxG20")
 	/* Maintainer: taskit GmbH */
 	.timer		= &at91sam926x_timer,
 	.map_io		= at91_map_io,
-	.init_early	= portuxg20_init_early,
+	.init_early	= stamp9g20_init_early,
 	.init_irq	= at91_init_irq_default,
 	.init_machine	= portuxg20_board_init,
 MACHINE_END
@@ -312,7 +296,7 @@ MACHINE_START(STAMP9G20, "taskit Stamp9G20")
 	/* Maintainer: taskit GmbH */
 	.timer		= &at91sam926x_timer,
 	.map_io		= at91_map_io,
-	.init_early	= stamp9g20evb_init_early,
+	.init_early	= stamp9g20_init_early,
 	.init_irq	= at91_init_irq_default,
 	.init_machine	= stamp9g20evb_board_init,
 MACHINE_END
diff --git a/arch/arm/mach-at91/board-usb-a926x.c b/arch/arm/mach-at91/board-usb-a926x.c
index b7483a3d0980..95393fcaf199 100644
--- a/arch/arm/mach-at91/board-usb-a926x.c
+++ b/arch/arm/mach-at91/board-usb-a926x.c
@@ -53,12 +53,6 @@ static void __init ek_init_early(void)
 {
 	/* Initialize processor: 12.00 MHz crystal */
 	at91_initialize(12000000);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
 }
 
 /*
@@ -178,6 +172,10 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
 		.offset	= MTDPART_OFS_NXTBLK,
 		.size	= SZ_128K,
 	}, {
+		.name	= "oftree",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= SZ_128K,
+	}, {
 		.name	= "kernel",
 		.offset	= MTDPART_OFS_NXTBLK,
 		.size	= 4 * SZ_1M,
@@ -325,6 +323,8 @@ static void __init ek_add_device_leds(void)
 static void __init ek_board_init(void)
 {
 	/* Serial */
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
 	at91_add_device_serial();
 	/* USB Host */
 	at91_add_device_usbh(&ek_usbh_data);
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index 38dd279d30b2..d56665ea4b55 100644
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -58,26 +58,6 @@ static void __init yl9200_init_early(void)
 
 	/* Initialize processor: 18.432 MHz crystal */
 	at91_initialize(18432000);
-
-	/* Setup the LEDs D2=PB17 (timer), D3=PB16 (cpu) */
-	at91_init_leds(AT91_PIN_PB16, AT91_PIN_PB17);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-			| ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
-			| ATMEL_UART_RI);
-
-	/* USART0 on ttyS2. (Rx & Tx only to JP3) */
-	at91_register_uart(AT91RM9200_ID_US0, 2, 0);
-
-	/* USART3 on ttyS3. (Rx, Tx, RTS - RS485 interface) */
-	at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_RTS);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
 }
 
 /*
@@ -560,7 +540,23 @@ void __init yl9200_add_device_video(void) {}
 
 static void __init yl9200_board_init(void)
 {
+	/* Setup the LEDs D2=PB17 (timer), D3=PB16 (cpu) */
+	at91_init_leds(AT91_PIN_PB16, AT91_PIN_PB17);
+
 	/* Serial */
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+			| ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+			| ATMEL_UART_RI);
+
+	/* USART0 on ttyS2. (Rx & Tx only to JP3) */
+	at91_register_uart(AT91RM9200_ID_US0, 2, 0);
+
+	/* USART3 on ttyS3. (Rx, Tx, RTS - RS485 interface) */
+	at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_RTS);
 	at91_add_device_serial();
 	/* Ethernet */
 	at91_add_device_eth(&yl9200_eth_data);
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index a0f4d7424cdc..de2ec6b8fea7 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -35,6 +35,7 @@
 #include "generic.h"
 
 void __iomem *at91_pmc_base;
+EXPORT_SYMBOL_GPL(at91_pmc_base);
 
 /*
  * There's a lot more which can be done with clocks, including cpufreq
@@ -57,13 +58,15 @@ void __iomem *at91_pmc_base;
 
 #define cpu_has_800M_plla()	(  cpu_is_at91sam9g20() \
 				|| cpu_is_at91sam9g45() \
-				|| cpu_is_at91sam9x5())
+				|| cpu_is_at91sam9x5() \
+				|| cpu_is_at91sam9n12())
 
 #define cpu_has_300M_plla()	(cpu_is_at91sam9g10())
 
 #define cpu_has_pllb()		(!(cpu_is_at91sam9rl() \
 				|| cpu_is_at91sam9g45() \
-				|| cpu_is_at91sam9x5()))
+				|| cpu_is_at91sam9x5() \
+				|| cpu_is_at91sam9n12()))
 
 #define cpu_has_upll()		(cpu_is_at91sam9g45() \
 				|| cpu_is_at91sam9x5())
@@ -77,12 +80,15 @@ void __iomem *at91_pmc_base;
 				|| cpu_is_at91sam9x5()))
 
 #define cpu_has_plladiv2()	(cpu_is_at91sam9g45() \
-				|| cpu_is_at91sam9x5())
+				|| cpu_is_at91sam9x5() \
+				|| cpu_is_at91sam9n12())
 
 #define cpu_has_mdiv3()		(cpu_is_at91sam9g45() \
-				|| cpu_is_at91sam9x5())
+				|| cpu_is_at91sam9x5() \
+				|| cpu_is_at91sam9n12())
 
-#define cpu_has_alt_prescaler()	(cpu_is_at91sam9x5())
+#define cpu_has_alt_prescaler()	(cpu_is_at91sam9x5() \
+				|| cpu_is_at91sam9n12())
 
 static LIST_HEAD(clocks);
 static DEFINE_SPINLOCK(clk_lock);
diff --git a/arch/arm/mach-at91/cpuidle.c b/arch/arm/mach-at91/cpuidle.c
index ece1f9aefb47..0c6381516a5a 100644
--- a/arch/arm/mach-at91/cpuidle.c
+++ b/arch/arm/mach-at91/cpuidle.c
@@ -21,6 +21,7 @@
 #include <linux/export.h>
 #include <asm/proc-fns.h>
 #include <asm/cpuidle.h>
+#include <mach/cpu.h>
 
 #include "pm.h"
 
@@ -33,7 +34,12 @@ static int at91_enter_idle(struct cpuidle_device *dev,
 			struct cpuidle_driver *drv,
 			       int index)
 {
-	at91_standby();
+	if (cpu_is_at91rm9200())
+		at91rm9200_standby();
+	else if (cpu_is_at91sam9g45())
+		at91sam9g45_standby();
+	else
+		at91sam9_standby();
 
 	return index;
 }
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index dd9b346c451d..0a60bf837037 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -40,17 +40,6 @@ extern struct sys_timer at91sam926x_timer;
 extern struct sys_timer at91x40_timer;
 
  /* Clocks */
-/*
- * function to specify the clock of the default console. As we do not
- * use the device/driver bus, the dev_name is not intialize. So we need
- * to link the clock to a specific con_id only "usart"
- */
-extern void __init at91rm9200_set_console_clock(int id);
-extern void __init at91sam9260_set_console_clock(int id);
-extern void __init at91sam9261_set_console_clock(int id);
-extern void __init at91sam9263_set_console_clock(int id);
-extern void __init at91sam9rl_set_console_clock(int id);
-extern void __init at91sam9g45_set_console_clock(int id);
 #ifdef CONFIG_AT91_PMC_UNIT
 extern int __init at91_clock_init(unsigned long main_clock);
 extern int __init at91_dt_clock_init(void);
diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h
index 36604782a78f..ea2c57a86ca6 100644
--- a/arch/arm/mach-at91/include/mach/at91_pmc.h
+++ b/arch/arm/mach-at91/include/mach/at91_pmc.h
@@ -25,7 +25,7 @@ extern void __iomem *at91_pmc_base;
 #define at91_pmc_write(field, value) \
 	__raw_writel(value, at91_pmc_base + field)
 #else
-.extern at91_aic_base
+.extern at91_pmc_base
 #endif
 
 #define	AT91_PMC_SCER		0x00			/* System Clock Enable Register */
diff --git a/arch/arm/mach-at91/include/mach/at91rm9200.h b/arch/arm/mach-at91/include/mach/at91rm9200.h
index 603e6aac2a4f..e67317c67761 100644
--- a/arch/arm/mach-at91/include/mach/at91rm9200.h
+++ b/arch/arm/mach-at91/include/mach/at91rm9200.h
@@ -88,11 +88,6 @@
 #define AT91RM9200_BASE_RTC	0xfffffe00	/* Real-Time Clock */
 #define AT91RM9200_BASE_MC	0xffffff00	/* Memory Controllers */
 
-#define AT91_USART0	AT91RM9200_BASE_US0
-#define AT91_USART1	AT91RM9200_BASE_US1
-#define AT91_USART2	AT91RM9200_BASE_US2
-#define AT91_USART3	AT91RM9200_BASE_US3
-
 /*
  * Internal Memory.
  */
diff --git a/arch/arm/mach-at91/include/mach/at91sam9260.h b/arch/arm/mach-at91/include/mach/at91sam9260.h
index 08ae9afd00fe..416c7b6c56d3 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9260.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9260.h
@@ -95,13 +95,6 @@
 #define AT91SAM9260_BASE_WDT	0xfffffd40
 #define AT91SAM9260_BASE_GPBR	0xfffffd50
 
-#define AT91_USART0	AT91SAM9260_BASE_US0
-#define AT91_USART1	AT91SAM9260_BASE_US1
-#define AT91_USART2	AT91SAM9260_BASE_US2
-#define AT91_USART3	AT91SAM9260_BASE_US3
-#define AT91_USART4	AT91SAM9260_BASE_US4
-#define AT91_USART5	AT91SAM9260_BASE_US5
-
 
 /*
  * Internal Memory.
diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h
index 44fbdc12ee62..a041406d06ee 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9261.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9261.h
@@ -79,10 +79,6 @@
 #define AT91SAM9261_BASE_WDT	0xfffffd40
 #define AT91SAM9261_BASE_GPBR	0xfffffd50
 
-#define AT91_USART0	AT91SAM9261_BASE_US0
-#define AT91_USART1	AT91SAM9261_BASE_US1
-#define AT91_USART2	AT91SAM9261_BASE_US2
-
 
 /*
  * Internal Memory.
diff --git a/arch/arm/mach-at91/include/mach/at91sam9263.h b/arch/arm/mach-at91/include/mach/at91sam9263.h
index d96cbb2e03c4..d201029d60b3 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9263.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9263.h
@@ -95,10 +95,6 @@
 #define AT91SAM9263_BASE_RTT1	0xfffffd50
 #define AT91SAM9263_BASE_GPBR	0xfffffd60
 
-#define AT91_USART0	AT91SAM9263_BASE_US0
-#define AT91_USART1	AT91SAM9263_BASE_US1
-#define AT91_USART2	AT91SAM9263_BASE_US2
-
 #define AT91_SMC	AT91_SMC0
 
 /*
diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h
index d052abcff852..3a4da24d5911 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9g45.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h
@@ -106,11 +106,6 @@
 #define AT91SAM9G45_BASE_RTC	0xfffffdb0
 #define AT91SAM9G45_BASE_GPBR	0xfffffd60
 
-#define AT91_USART0	AT91SAM9G45_BASE_US0
-#define AT91_USART1	AT91SAM9G45_BASE_US1
-#define AT91_USART2	AT91SAM9G45_BASE_US2
-#define AT91_USART3	AT91SAM9G45_BASE_US3
-
 /*
  * Internal Memory.
  */
diff --git a/arch/arm/mach-at91/include/mach/at91sam9n12.h b/arch/arm/mach-at91/include/mach/at91sam9n12.h
new file mode 100644
index 000000000000..d374b87c0459
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9n12.h
@@ -0,0 +1,60 @@
+/*
+ * SoC specific header file for the AT91SAM9N12
+ *
+ * Copyright (C) 2012 Atmel Corporation
+ *
+ * Common definitions, based on AT91SAM9N12 SoC datasheet
+ *
+ * Licensed under GPLv2 or later
+ */
+
+#ifndef _AT91SAM9N12_H_
+#define _AT91SAM9N12_H_
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91SAM9N12_ID_PIOAB	2	/* Parallel I/O Controller A and B */
+#define AT91SAM9N12_ID_PIOCD	3	/* Parallel I/O Controller C and D */
+#define AT91SAM9N12_ID_FUSE	4	/* FUSE Controller */
+#define AT91SAM9N12_ID_USART0	5	/* USART 0 */
+#define AT91SAM9N12_ID_USART1	6	/* USART 1 */
+#define AT91SAM9N12_ID_USART2	7	/* USART 2 */
+#define AT91SAM9N12_ID_USART3	8	/* USART 3 */
+#define AT91SAM9N12_ID_TWI0	9	/* Two-Wire Interface 0 */
+#define AT91SAM9N12_ID_TWI1	10	/* Two-Wire Interface 1 */
+#define AT91SAM9N12_ID_MCI	12	/* High Speed Multimedia Card Interface */
+#define AT91SAM9N12_ID_SPI0	13	/* Serial Peripheral Interface 0 */
+#define AT91SAM9N12_ID_SPI1	14	/* Serial Peripheral Interface 1 */
+#define AT91SAM9N12_ID_UART0	15	/* UART 0 */
+#define AT91SAM9N12_ID_UART1	16	/* UART 1 */
+#define AT91SAM9N12_ID_TCB	17	/* Timer Counter 0, 1, 2, 3, 4 and 5 */
+#define AT91SAM9N12_ID_PWM	18	/* Pulse Width Modulation Controller */
+#define AT91SAM9N12_ID_ADC	19	/* ADC Controller */
+#define AT91SAM9N12_ID_DMA	20	/* DMA Controller */
+#define AT91SAM9N12_ID_UHP	22	/* USB Host High Speed */
+#define AT91SAM9N12_ID_UDP	23	/* USB Device High Speed */
+#define AT91SAM9N12_ID_LCDC	25	/* LCD Controller */
+#define AT91SAM9N12_ID_ISI	25	/* Image Sensor Interface */
+#define AT91SAM9N12_ID_SSC	28	/* Synchronous Serial Controller */
+#define AT91SAM9N12_ID_TRNG	30	/* TRNG */
+#define AT91SAM9N12_ID_IRQ0	31	/* Advanced Interrupt Controller */
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91SAM9N12_BASE_USART0	0xf801c000
+#define AT91SAM9N12_BASE_USART1	0xf8020000
+#define AT91SAM9N12_BASE_USART2	0xf8024000
+#define AT91SAM9N12_BASE_USART3	0xf8028000
+
+/*
+ * Internal Memory.
+ */
+#define AT91SAM9N12_SRAM_BASE	0x00300000	/* Internal SRAM base address */
+#define AT91SAM9N12_SRAM_SIZE	SZ_32K		/* Internal SRAM size (32Kb) */
+
+#define AT91SAM9N12_ROM_BASE	0x00100000	/* Internal ROM base address */
+#define AT91SAM9N12_ROM_SIZE	SZ_128K		/* Internal ROM size (128Kb) */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9n12_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9n12_matrix.h
new file mode 100644
index 000000000000..40060cd62fa9
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9n12_matrix.h
@@ -0,0 +1,53 @@
+/*
+ * Matrix-centric header file for the AT91SAM9N12
+ *
+ * Copyright (C) 2012 Atmel Corporation.
+ *
+ * Only EBI related registers.
+ * Write Protect register definitions may be useful.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#ifndef _AT91SAM9N12_MATRIX_H_
+#define _AT91SAM9N12_MATRIX_H_
+
+#define AT91_MATRIX_EBICSA	(AT91_MATRIX + 0x118)	/* EBI Chip Select Assignment Register */
+#define		AT91_MATRIX_EBI_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
+#define			AT91_MATRIX_EBI_CS1A_SMC		(0 << 1)
+#define			AT91_MATRIX_EBI_CS1A_SDRAMC		(1 << 1)
+#define		AT91_MATRIX_EBI_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
+#define			AT91_MATRIX_EBI_CS3A_SMC		(0 << 3)
+#define			AT91_MATRIX_EBI_CS3A_SMC_NANDFLASH	(1 << 3)
+#define		AT91_MATRIX_EBI_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
+#define			AT91_MATRIX_EBI_DBPU_ON			(0 << 8)
+#define			AT91_MATRIX_EBI_DBPU_OFF		(1 << 8)
+#define		AT91_MATRIX_EBI_VDDIOMSEL	(1 << 16)	/* Memory voltage selection */
+#define			AT91_MATRIX_EBI_VDDIOMSEL_1_8V		(0 << 16)
+#define			AT91_MATRIX_EBI_VDDIOMSEL_3_3V		(1 << 16)
+#define		AT91_MATRIX_EBI_EBI_IOSR	(1 << 17)	/* EBI I/O slew rate selection */
+#define			AT91_MATRIX_EBI_EBI_IOSR_REDUCED	(0 << 17)
+#define			AT91_MATRIX_EBI_EBI_IOSR_NORMAL		(1 << 17)
+#define		AT91_MATRIX_EBI_DDR_IOSR	(1 << 18)	/* DDR2 dedicated port I/O slew rate selection */
+#define			AT91_MATRIX_EBI_DDR_IOSR_REDUCED	(0 << 18)
+#define			AT91_MATRIX_EBI_DDR_IOSR_NORMAL		(1 << 18)
+#define		AT91_MATRIX_NFD0_SELECT		(1 << 24)	/* NAND Flash Data Bus Selection */
+#define			AT91_MATRIX_NFD0_ON_D0			(0 << 24)
+#define			AT91_MATRIX_NFD0_ON_D16			(1 << 24)
+#define		AT91_MATRIX_DDR_MP_EN		(1 << 25)	/* DDR Multi-port Enable */
+#define			AT91_MATRIX_MP_OFF			(0 << 25)
+#define			AT91_MATRIX_MP_ON			(1 << 25)
+
+#define AT91_MATRIX_WPMR	(AT91_MATRIX + 0x1E4)	/* Write Protect Mode Register */
+#define		AT91_MATRIX_WPMR_WPEN		(1 << 0)	/* Write Protect ENable */
+#define			AT91_MATRIX_WPMR_WP_WPDIS		(0 << 0)
+#define			AT91_MATRIX_WPMR_WP_WPEN		(1 << 0)
+#define		AT91_MATRIX_WPMR_WPKEY		(0xFFFFFF << 8)	/* Write Protect KEY */
+
+#define AT91_MATRIX_WPSR	(AT91_MATRIX + 0x1E8)	/* Write Protect Status Register */
+#define		AT91_MATRIX_WPSR_WPVS		(1 << 0)	/* Write Protect Violation Status */
+#define			AT91_MATRIX_WPSR_NO_WPV		(0 << 0)
+#define			AT91_MATRIX_WPSR_WPV		(1 << 0)
+#define		AT91_MATRIX_WPSR_WPVSRC		(0xFFFF << 8)	/* Write Protect Violation Source */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl.h b/arch/arm/mach-at91/include/mach/at91sam9rl.h
index e0073eb10144..a15db56d33fa 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9rl.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9rl.h
@@ -89,11 +89,6 @@
 #define AT91SAM9RL_BASE_GPBR	0xfffffd60
 #define AT91SAM9RL_BASE_RTC	0xfffffe00
 
-#define AT91_USART0	AT91SAM9RL_BASE_US0
-#define AT91_USART1	AT91SAM9RL_BASE_US1
-#define AT91_USART2	AT91SAM9RL_BASE_US2
-#define AT91_USART3	AT91SAM9RL_BASE_US3
-
 
 /*
  * Internal Memory.
diff --git a/arch/arm/mach-at91/include/mach/at91sam9x5.h b/arch/arm/mach-at91/include/mach/at91sam9x5.h
index 88e43d534cdf..c75ee19b58d3 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9x5.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9x5.h
@@ -55,14 +55,6 @@
 #define AT91SAM9X5_BASE_USART2	0xf8024000
 
 /*
- * Base addresses for early serial code (uncompress.h)
- */
-#define AT91_DBGU	AT91_BASE_DBGU0
-#define AT91_USART0	AT91SAM9X5_BASE_USART0
-#define AT91_USART1	AT91SAM9X5_BASE_USART1
-#define AT91_USART2	AT91SAM9X5_BASE_USART2
-
-/*
  * Internal Memory.
  */
 #define AT91SAM9X5_SRAM_BASE	0x00300000	/* Internal SRAM base address */
diff --git a/arch/arm/mach-at91/include/mach/at_hdmac.h b/arch/arm/mach-at91/include/mach/at_hdmac.h
index fff48d1a0f4e..cab0997be3de 100644
--- a/arch/arm/mach-at91/include/mach/at_hdmac.h
+++ b/arch/arm/mach-at91/include/mach/at_hdmac.h
@@ -26,18 +26,11 @@ struct at_dma_platform_data {
 /**
  * struct at_dma_slave - Controller-specific information about a slave
  * @dma_dev: required DMA master device
- * @tx_reg: physical address of data register used for
- *	memory-to-peripheral transfers
- * @rx_reg: physical address of data register used for
- *	peripheral-to-memory transfers
- * @reg_width: peripheral register width
  * @cfg: Platform-specific initializer for the CFG register
- * @ctrla: Platform-specific initializer for the CTRLA register
  */
 struct at_dma_slave {
 	struct device		*dma_dev;
 	u32			cfg;
-	u32			ctrla;
 };
 
 
@@ -64,24 +57,5 @@ struct at_dma_slave {
 #define		ATC_FIFOCFG_HALFFIFO		(0x1 << 28)
 #define		ATC_FIFOCFG_ENOUGHSPACE		(0x2 << 28)
 
-/* Platform-configurable bits in CTRLA */
-#define	ATC_SCSIZE_MASK		(0x7 << 16)	/* Source Chunk Transfer Size */
-#define		ATC_SCSIZE_1		(0x0 << 16)
-#define		ATC_SCSIZE_4		(0x1 << 16)
-#define		ATC_SCSIZE_8		(0x2 << 16)
-#define		ATC_SCSIZE_16		(0x3 << 16)
-#define		ATC_SCSIZE_32		(0x4 << 16)
-#define		ATC_SCSIZE_64		(0x5 << 16)
-#define		ATC_SCSIZE_128		(0x6 << 16)
-#define		ATC_SCSIZE_256		(0x7 << 16)
-#define	ATC_DCSIZE_MASK		(0x7 << 20)	/* Destination Chunk Transfer Size */
-#define		ATC_DCSIZE_1		(0x0 << 20)
-#define		ATC_DCSIZE_4		(0x1 << 20)
-#define		ATC_DCSIZE_8		(0x2 << 20)
-#define		ATC_DCSIZE_16		(0x3 << 20)
-#define		ATC_DCSIZE_32		(0x4 << 20)
-#define		ATC_DCSIZE_64		(0x5 << 20)
-#define		ATC_DCSIZE_128		(0x6 << 20)
-#define		ATC_DCSIZE_256		(0x7 << 20)
 
 #endif /* AT_HDMAC_H */
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index 544a5d5ce416..369afc2ffc5b 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -86,14 +86,15 @@ extern void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *d
 extern void __init at91_add_device_eth(struct macb_platform_data *data);
 
  /* USB Host */
+#define AT91_MAX_USBH_PORTS	3
 struct at91_usbh_data {
-	u8		ports;		/* number of ports on root hub */
-	int		vbus_pin[2];	/* port power-control pin */
-	u8              vbus_pin_active_low[2];
+	int		vbus_pin[AT91_MAX_USBH_PORTS];	/* port power-control pin */
+	int             overcurrent_pin[AT91_MAX_USBH_PORTS];
+	u8		ports;				/* number of ports on root hub */
 	u8              overcurrent_supported;
-	int             overcurrent_pin[2];
-	u8              overcurrent_status[2];
-	u8              overcurrent_changed[2];
+	u8              vbus_pin_active_low[AT91_MAX_USBH_PORTS];
+	u8              overcurrent_status[AT91_MAX_USBH_PORTS];
+	u8              overcurrent_changed[AT91_MAX_USBH_PORTS];
 };
 extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
 extern void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data);
@@ -120,7 +121,6 @@ extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_de
 #define ATMEL_UART_RI	0x20
 
 extern void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins);
-extern void __init at91_set_serial_console(unsigned portnr);
 
 extern struct platform_device *atmel_default_console_device;
 
diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h
index 0118c3338552..b6504c19d55c 100644
--- a/arch/arm/mach-at91/include/mach/cpu.h
+++ b/arch/arm/mach-at91/include/mach/cpu.h
@@ -25,6 +25,7 @@
 #define ARCH_ID_AT91SAM9G45MRL	0x819b05a2	/* aka 9G45-ES2 & non ES lots */
 #define ARCH_ID_AT91SAM9G45ES	0x819b05a1	/* 9G45-ES (Engineering Sample) */
 #define ARCH_ID_AT91SAM9X5	0x819a05a0
+#define ARCH_ID_AT91SAM9N12	0x819a07a0
 
 #define ARCH_ID_AT91SAM9XE128	0x329973a0
 #define ARCH_ID_AT91SAM9XE256	0x329a93a0
@@ -54,6 +55,7 @@
 #define ARCH_REVISON_9200_BGA	(0 << 0)
 #define ARCH_REVISON_9200_PQFP	(1 << 0)
 
+#ifndef __ASSEMBLY__
 enum at91_soc_type {
 	/* 920T */
 	AT91_SOC_RM9200,
@@ -70,6 +72,9 @@ enum at91_soc_type {
 	/* SAM9X5 */
 	AT91_SOC_SAM9X5,
 
+	/* SAM9N12 */
+	AT91_SOC_SAM9N12,
+
 	/* Unknown type */
 	AT91_SOC_NONE
 };
@@ -106,7 +111,7 @@ static inline int at91_soc_is_detected(void)
 	return at91_soc_initdata.type != AT91_SOC_NONE;
 }
 
-#ifdef CONFIG_ARCH_AT91RM9200
+#ifdef CONFIG_SOC_AT91RM9200
 #define cpu_is_at91rm9200()	(at91_soc_initdata.type == AT91_SOC_RM9200)
 #define cpu_is_at91rm9200_bga()	(at91_soc_initdata.subtype == AT91_SOC_RM9200_BGA)
 #define cpu_is_at91rm9200_pqfp() (at91_soc_initdata.subtype == AT91_SOC_RM9200_PQFP)
@@ -116,45 +121,37 @@ static inline int at91_soc_is_detected(void)
 #define cpu_is_at91rm9200_pqfp() (0)
 #endif
 
-#ifdef CONFIG_ARCH_AT91SAM9260
+#ifdef CONFIG_SOC_AT91SAM9260
 #define cpu_is_at91sam9xe()	(at91_soc_initdata.subtype == AT91_SOC_SAM9XE)
 #define cpu_is_at91sam9260()	(at91_soc_initdata.type == AT91_SOC_SAM9260)
+#define cpu_is_at91sam9g20()	(at91_soc_initdata.type == AT91_SOC_SAM9G20)
 #else
 #define cpu_is_at91sam9xe()	(0)
 #define cpu_is_at91sam9260()	(0)
-#endif
-
-#ifdef CONFIG_ARCH_AT91SAM9G20
-#define cpu_is_at91sam9g20()	(at91_soc_initdata.type == AT91_SOC_SAM9G20)
-#else
 #define cpu_is_at91sam9g20()	(0)
 #endif
 
-#ifdef CONFIG_ARCH_AT91SAM9261
+#ifdef CONFIG_SOC_AT91SAM9261
 #define cpu_is_at91sam9261()	(at91_soc_initdata.type == AT91_SOC_SAM9261)
-#else
-#define cpu_is_at91sam9261()	(0)
-#endif
-
-#ifdef CONFIG_ARCH_AT91SAM9G10
 #define cpu_is_at91sam9g10()	(at91_soc_initdata.type == AT91_SOC_SAM9G10)
 #else
+#define cpu_is_at91sam9261()	(0)
 #define cpu_is_at91sam9g10()	(0)
 #endif
 
-#ifdef CONFIG_ARCH_AT91SAM9263
+#ifdef CONFIG_SOC_AT91SAM9263
 #define cpu_is_at91sam9263()	(at91_soc_initdata.type == AT91_SOC_SAM9263)
 #else
 #define cpu_is_at91sam9263()	(0)
 #endif
 
-#ifdef CONFIG_ARCH_AT91SAM9RL
+#ifdef CONFIG_SOC_AT91SAM9RL
 #define cpu_is_at91sam9rl()	(at91_soc_initdata.type == AT91_SOC_SAM9RL)
 #else
 #define cpu_is_at91sam9rl()	(0)
 #endif
 
-#ifdef CONFIG_ARCH_AT91SAM9G45
+#ifdef CONFIG_SOC_AT91SAM9G45
 #define cpu_is_at91sam9g45()	(at91_soc_initdata.type == AT91_SOC_SAM9G45)
 #define cpu_is_at91sam9g45es()	(at91_soc_initdata.subtype == AT91_SOC_SAM9G45ES)
 #define cpu_is_at91sam9m10()	(at91_soc_initdata.subtype == AT91_SOC_SAM9M10)
@@ -168,7 +165,7 @@ static inline int at91_soc_is_detected(void)
 #define cpu_is_at91sam9m11()	(0)
 #endif
 
-#ifdef CONFIG_ARCH_AT91SAM9X5
+#ifdef CONFIG_SOC_AT91SAM9X5
 #define cpu_is_at91sam9x5()	(at91_soc_initdata.type == AT91_SOC_SAM9X5)
 #define cpu_is_at91sam9g15()	(at91_soc_initdata.subtype == AT91_SOC_SAM9G15)
 #define cpu_is_at91sam9g35()	(at91_soc_initdata.subtype == AT91_SOC_SAM9G35)
@@ -184,10 +181,17 @@ static inline int at91_soc_is_detected(void)
 #define cpu_is_at91sam9x25()	(0)
 #endif
 
+#ifdef CONFIG_SOC_AT91SAM9N12
+#define cpu_is_at91sam9n12()	(at91_soc_initdata.type == AT91_SOC_SAM9N12)
+#else
+#define cpu_is_at91sam9n12()	(0)
+#endif
+
 /*
  * Since this is ARM, we will never run on any AVR32 CPU. But these
  * definitions may reduce clutter in common drivers.
  */
 #define cpu_is_at32ap7000()	(0)
+#endif /* __ASSEMBLY__ */
 
 #endif /* __MACH_CPU_H__ */
diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h
index e9e29a6c3868..09242b67d277 100644
--- a/arch/arm/mach-at91/include/mach/hardware.h
+++ b/arch/arm/mach-at91/include/mach/hardware.h
@@ -22,27 +22,18 @@
 /* 9263, 9g45 */
 #define AT91_BASE_DBGU1	0xffffee00
 
-#if defined(CONFIG_ARCH_AT91RM9200)
+#if defined(CONFIG_ARCH_AT91X40)
+#include <mach/at91x40.h>
+#else
 #include <mach/at91rm9200.h>
-#elif defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20)
 #include <mach/at91sam9260.h>
-#elif defined(CONFIG_ARCH_AT91SAM9261) || defined(CONFIG_ARCH_AT91SAM9G10)
 #include <mach/at91sam9261.h>
-#elif defined(CONFIG_ARCH_AT91SAM9263)
 #include <mach/at91sam9263.h>
-#elif defined(CONFIG_ARCH_AT91SAM9RL)
 #include <mach/at91sam9rl.h>
-#elif defined(CONFIG_ARCH_AT91SAM9G45)
 #include <mach/at91sam9g45.h>
-#elif defined(CONFIG_ARCH_AT91SAM9X5)
 #include <mach/at91sam9x5.h>
-#elif defined(CONFIG_ARCH_AT91X40)
-#include <mach/at91x40.h>
-#else
-#error "Unsupported AT91 processor"
-#endif
+#include <mach/at91sam9n12.h>
 
-#if !defined(CONFIG_ARCH_AT91X40)
 /*
  * On all at91 except rm9200 and x40 have the System Controller starts
  * at address 0xffffc000 and has a size of 16KiB.
@@ -94,7 +85,6 @@
  * Virtual to Physical Address mapping for IO devices.
  */
 #define AT91_VA_BASE_SYS	AT91_IO_P2V(AT91_BASE_SYS)
-#define AT91_VA_BASE_EMAC	AT91_IO_P2V(AT91RM9200_BASE_EMAC)
 
  /* Internal SRAM is mapped below the IO devices */
 #define AT91_SRAM_MAX		SZ_1M
diff --git a/arch/arm/include/asm/hardware/ep7211.h b/arch/arm/mach-at91/include/mach/io.h
index 654d5f625c49..2d9ca0455745 100644
--- a/arch/arm/include/asm/hardware/ep7211.h
+++ b/arch/arm/mach-at91/include/mach/io.h
@@ -1,10 +1,7 @@
 /*
- *  arch/arm/include/asm/hardware/ep7211.h
+ * arch/arm/mach-at91/include/mach/io.h
  *
- *  This file contains the hardware definitions of the EP7211 internal
- *  registers.
- *
- *  Copyright (C) 2001 Blue Mug, Inc.  All Rights Reserved.
+ *  Copyright (C) 2003 SAN People
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -20,21 +17,11 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#ifndef __ASM_HARDWARE_EP7211_H
-#define __ASM_HARDWARE_EP7211_H
-
-#include <asm/hardware/clps7111.h>
 
-/*
- * define EP7211_BASE to be the base address of the region
- * you want to access.
- */
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
 
-#define EP7211_PHYS_BASE	(0x80000000)
-
-/*
- * XXX miket@bluemug.com: need to introduce EP7211 registers (those not
- * present in 7212) here.
- */
+#define IO_SPACE_LIMIT		0xFFFFFFFF
+#define __io(a)			__typesafe_io(a)
 
-#endif /* __ASM_HARDWARE_EP7211_H */
+#endif
diff --git a/arch/arm/mach-at91/include/mach/uncompress.h b/arch/arm/mach-at91/include/mach/uncompress.h
index 4218647c1fcd..6f6118d1576a 100644
--- a/arch/arm/mach-at91/include/mach/uncompress.h
+++ b/arch/arm/mach-at91/include/mach/uncompress.h
@@ -1,7 +1,8 @@
 /*
  * arch/arm/mach-at91/include/mach/uncompress.h
  *
- *  Copyright (C) 2003 SAN People
+ * Copyright (C) 2003 SAN People
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -25,22 +26,147 @@
 #include <linux/atmel_serial.h>
 #include <mach/hardware.h>
 
-#if defined(CONFIG_AT91_EARLY_DBGU0)
-#define UART_OFFSET AT91_BASE_DBGU0
-#elif defined(CONFIG_AT91_EARLY_DBGU1)
-#define UART_OFFSET AT91_BASE_DBGU1
-#elif defined(CONFIG_AT91_EARLY_USART0)
-#define UART_OFFSET AT91_USART0
-#elif defined(CONFIG_AT91_EARLY_USART1)
-#define UART_OFFSET AT91_USART1
-#elif defined(CONFIG_AT91_EARLY_USART2)
-#define UART_OFFSET AT91_USART2
-#elif defined(CONFIG_AT91_EARLY_USART3)
-#define UART_OFFSET AT91_USART3
-#elif defined(CONFIG_AT91_EARLY_USART4)
-#define UART_OFFSET AT91_USART4
-#elif defined(CONFIG_AT91_EARLY_USART5)
-#define UART_OFFSET AT91_USART5
+#include <mach/at91_dbgu.h>
+#include <mach/cpu.h>
+
+void __iomem *at91_uart;
+
+#if !defined(CONFIG_ARCH_AT91X40)
+static const u32 uarts_rm9200[] = {
+	AT91_BASE_DBGU0,
+	AT91RM9200_BASE_US0,
+	AT91RM9200_BASE_US1,
+	AT91RM9200_BASE_US2,
+	AT91RM9200_BASE_US3,
+	0,
+};
+
+static const u32 uarts_sam9260[] = {
+	AT91_BASE_DBGU0,
+	AT91SAM9260_BASE_US0,
+	AT91SAM9260_BASE_US1,
+	AT91SAM9260_BASE_US2,
+	AT91SAM9260_BASE_US3,
+	AT91SAM9260_BASE_US4,
+	AT91SAM9260_BASE_US5,
+	0,
+};
+
+static const u32 uarts_sam9261[] = {
+	AT91_BASE_DBGU0,
+	AT91SAM9261_BASE_US0,
+	AT91SAM9261_BASE_US1,
+	AT91SAM9261_BASE_US2,
+	0,
+};
+
+static const u32 uarts_sam9263[] = {
+	AT91_BASE_DBGU1,
+	AT91SAM9263_BASE_US0,
+	AT91SAM9263_BASE_US1,
+	AT91SAM9263_BASE_US2,
+	0,
+};
+
+static const u32 uarts_sam9g45[] = {
+	AT91_BASE_DBGU1,
+	AT91SAM9G45_BASE_US0,
+	AT91SAM9G45_BASE_US1,
+	AT91SAM9G45_BASE_US2,
+	AT91SAM9G45_BASE_US3,
+	0,
+};
+
+static const u32 uarts_sam9rl[] = {
+	AT91_BASE_DBGU0,
+	AT91SAM9RL_BASE_US0,
+	AT91SAM9RL_BASE_US1,
+	AT91SAM9RL_BASE_US2,
+	AT91SAM9RL_BASE_US3,
+	0,
+};
+
+static const u32 uarts_sam9x5[] = {
+	AT91_BASE_DBGU0,
+	AT91SAM9X5_BASE_USART0,
+	AT91SAM9X5_BASE_USART1,
+	AT91SAM9X5_BASE_USART2,
+	0,
+};
+
+static inline const u32* decomp_soc_detect(u32 dbgu_base)
+{
+	u32 cidr, socid;
+
+	cidr = __raw_readl(dbgu_base + AT91_DBGU_CIDR);
+	socid = cidr & ~AT91_CIDR_VERSION;
+
+	switch (socid) {
+	case ARCH_ID_AT91RM9200:
+		return uarts_rm9200;
+
+	case ARCH_ID_AT91SAM9G20:
+	case ARCH_ID_AT91SAM9260:
+		return uarts_sam9260;
+
+	case ARCH_ID_AT91SAM9261:
+		return uarts_sam9261;
+
+	case ARCH_ID_AT91SAM9263:
+		return uarts_sam9263;
+
+	case ARCH_ID_AT91SAM9G45:
+		return uarts_sam9g45;
+
+	case ARCH_ID_AT91SAM9RL64:
+		return uarts_sam9rl;
+
+	case ARCH_ID_AT91SAM9X5:
+		return uarts_sam9x5;
+	}
+
+	/* at91sam9g10 */
+	if ((cidr & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) {
+		return uarts_sam9261;
+	}
+	/* at91sam9xe */
+	else if ((cidr & AT91_CIDR_ARCH) == ARCH_FAMILY_AT91SAM9XE) {
+		return uarts_sam9260;
+	}
+
+	return NULL;
+}
+
+static inline void arch_decomp_setup(void)
+{
+	int i = 0;
+	const u32* usarts;
+
+	usarts = decomp_soc_detect(AT91_BASE_DBGU0);
+
+	if (!usarts)
+		usarts = decomp_soc_detect(AT91_BASE_DBGU1);
+	if (!usarts) {
+		at91_uart = NULL;
+		return;
+	}
+
+	do {
+		/* physical address */
+		at91_uart = (void __iomem *)usarts[i];
+
+		if (__raw_readl(at91_uart + ATMEL_US_BRGR))
+			return;
+		i++;
+	} while (usarts[i]);
+
+	at91_uart = NULL;
+}
+#else
+static inline void arch_decomp_setup(void)
+{
+	at91_uart = NULL;
+}
 #endif
 
 /*
@@ -52,28 +178,24 @@
  */
 static void putc(int c)
 {
-#ifdef UART_OFFSET
-	void __iomem *sys = (void __iomem *) UART_OFFSET;	/* physical address */
+	if (!at91_uart)
+		return;
 
-	while (!(__raw_readl(sys + ATMEL_US_CSR) & ATMEL_US_TXRDY))
+	while (!(__raw_readl(at91_uart + ATMEL_US_CSR) & ATMEL_US_TXRDY))
 		barrier();
-	__raw_writel(c, sys + ATMEL_US_THR);
-#endif
+	__raw_writel(c, at91_uart + ATMEL_US_THR);
 }
 
 static inline void flush(void)
 {
-#ifdef UART_OFFSET
-	void __iomem *sys = (void __iomem *) UART_OFFSET;	/* physical address */
+	if (!at91_uart)
+		return;
 
 	/* wait for transmission to complete */
-	while (!(__raw_readl(sys + ATMEL_US_CSR) & ATMEL_US_TXEMPTY))
+	while (!(__raw_readl(at91_uart + ATMEL_US_CSR) & ATMEL_US_TXEMPTY))
 		barrier();
-#endif
 }
 
-#define arch_decomp_setup()
-
 #define arch_decomp_wdog()
 
 #endif
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index f630250c6b87..1bfaad628731 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -261,7 +261,12 @@ static int at91_pm_enter(suspend_state_t state)
 			 * For ARM 926 based chips, this requirement is weaker
 			 * as at91sam9 can access a RAM in self-refresh mode.
 			 */
-			at91_standby();
+			if (cpu_is_at91rm9200())
+				at91rm9200_standby();
+			else if (cpu_is_at91sam9g45())
+				at91sam9g45_standby();
+			else
+				at91sam9_standby();
 			break;
 
 		case PM_SUSPEND_ON:
@@ -307,10 +312,9 @@ static int __init at91_pm_init(void)
 
 	pr_info("AT91: Power Management%s\n", (slow_clock ? " (with slow clock mode)" : ""));
 
-#ifdef CONFIG_ARCH_AT91RM9200
 	/* AT91RM9200 SDRAM low-power mode cannot be used with self-refresh. */
-	at91_ramc_write(0, AT91RM9200_SDRAMC_LPR, 0);
-#endif
+	if (cpu_is_at91rm9200())
+		at91_ramc_write(0, AT91RM9200_SDRAMC_LPR, 0);
 
 	suspend_set_ops(&at91_pm_ops);
 
diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
index 89f56f3a802e..38f467c6b710 100644
--- a/arch/arm/mach-at91/pm.h
+++ b/arch/arm/mach-at91/pm.h
@@ -12,7 +12,6 @@
 #define __ARCH_ARM_MACH_AT91_PM
 
 #include <mach/at91_ramc.h>
-#ifdef CONFIG_ARCH_AT91RM9200
 #include <mach/at91rm9200_sdramc.h>
 
 /*
@@ -43,10 +42,6 @@ static inline void at91rm9200_standby(void)
 		  "r" (lpr));
 }
 
-#define at91_standby at91rm9200_standby
-
-#elif defined(CONFIG_ARCH_AT91SAM9G45)
-
 /* We manage both DDRAM/SDRAM controllers, we need more than one value to
  * remember.
  */
@@ -75,11 +70,7 @@ static inline void at91sam9g45_standby(void)
 	at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1);
 }
 
-#define at91_standby at91sam9g45_standby
-
-#else
-
-#ifdef CONFIG_ARCH_AT91SAM9263
+#ifdef CONFIG_SOC_AT91SAM9263
 /*
  * FIXME either or both the SDRAM controllers (EB0, EB1) might be in use;
  * handle those cases both here and in the Suspend-To-RAM support.
@@ -102,8 +93,4 @@ static inline void at91sam9_standby(void)
 	at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr);
 }
 
-#define at91_standby at91sam9_standby
-
-#endif
-
 #endif
diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S
index db5452123f17..098c28ddf025 100644
--- a/arch/arm/mach-at91/pm_slowclock.S
+++ b/arch/arm/mach-at91/pm_slowclock.S
@@ -18,7 +18,7 @@
 #include <mach/at91_ramc.h>
 
 
-#ifdef CONFIG_ARCH_AT91SAM9263
+#ifdef CONFIG_SOC_AT91SAM9263
 /*
  * FIXME either or both the SDRAM controllers (EB0, EB1) might be in use;
  * handle those cases both here and in the Suspend-To-RAM support.
diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c
index 97cc04dc8073..944bffb08991 100644
--- a/arch/arm/mach-at91/setup.c
+++ b/arch/arm/mach-at91/setup.c
@@ -54,6 +54,7 @@ void __init at91_init_interrupts(unsigned int *priority)
 }
 
 void __iomem *at91_ramc_base[2];
+EXPORT_SYMBOL_GPL(at91_ramc_base);
 
 void __init at91_ioremap_ramc(int id, u32 addr, u32 size)
 {
@@ -142,6 +143,11 @@ static void __init soc_detect(u32 dbgu_base)
 		at91_soc_initdata.type = AT91_SOC_SAM9X5;
 		at91_boot_soc = at91sam9x5_soc;
 		break;
+
+	case ARCH_ID_AT91SAM9N12:
+		at91_soc_initdata.type = AT91_SOC_SAM9N12;
+		at91_boot_soc = at91sam9n12_soc;
+		break;
 	}
 
 	/* at91sam9g10 */
@@ -209,6 +215,7 @@ static const char *soc_name[] = {
 	[AT91_SOC_SAM9G45]	= "at91sam9g45",
 	[AT91_SOC_SAM9RL]	= "at91sam9rl",
 	[AT91_SOC_SAM9X5]	= "at91sam9x5",
+	[AT91_SOC_SAM9N12]	= "at91sam9n12",
 	[AT91_SOC_NONE]		= "Unknown"
 };
 
@@ -292,6 +299,7 @@ void __init at91_ioremap_rstc(u32 base_addr)
 }
 
 void __iomem *at91_matrix_base;
+EXPORT_SYMBOL_GPL(at91_matrix_base);
 
 void __init at91_ioremap_matrix(u32 base_addr)
 {
diff --git a/arch/arm/mach-at91/soc.h b/arch/arm/mach-at91/soc.h
index 5db4aa45404a..a9cfeb153719 100644
--- a/arch/arm/mach-at91/soc.h
+++ b/arch/arm/mach-at91/soc.h
@@ -20,36 +20,41 @@ extern struct at91_init_soc at91sam9263_soc;
 extern struct at91_init_soc at91sam9g45_soc;
 extern struct at91_init_soc at91sam9rl_soc;
 extern struct at91_init_soc at91sam9x5_soc;
+extern struct at91_init_soc at91sam9n12_soc;
 
 static inline int at91_soc_is_enabled(void)
 {
 	return at91_boot_soc.init != NULL;
 }
 
-#if !defined(CONFIG_ARCH_AT91RM9200)
+#if !defined(CONFIG_SOC_AT91RM9200)
 #define at91rm9200_soc	at91_boot_soc
 #endif
 
-#if !(defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20))
+#if !defined(CONFIG_SOC_AT91SAM9260)
 #define at91sam9260_soc	at91_boot_soc
 #endif
 
-#if !(defined(CONFIG_ARCH_AT91SAM9261) || defined(CONFIG_ARCH_AT91SAM9G10))
+#if !defined(CONFIG_SOC_AT91SAM9261)
 #define at91sam9261_soc	at91_boot_soc
 #endif
 
-#if !defined(CONFIG_ARCH_AT91SAM9263)
+#if !defined(CONFIG_SOC_AT91SAM9263)
 #define at91sam9263_soc	at91_boot_soc
 #endif
 
-#if !defined(CONFIG_ARCH_AT91SAM9G45)
+#if !defined(CONFIG_SOC_AT91SAM9G45)
 #define at91sam9g45_soc	at91_boot_soc
 #endif
 
-#if !defined(CONFIG_ARCH_AT91SAM9RL)
+#if !defined(CONFIG_SOC_AT91SAM9RL)
 #define at91sam9rl_soc	at91_boot_soc
 #endif
 
-#if !defined(CONFIG_ARCH_AT91SAM9X5)
+#if !defined(CONFIG_SOC_AT91SAM9X5)
 #define at91sam9x5_soc	at91_boot_soc
 #endif
+
+#if !defined(CONFIG_SOC_AT91SAM9N12)
+#define at91sam9n12_soc	at91_boot_soc
+#endif
diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c
index 22e4e0a28ad1..adbfb1994582 100644
--- a/arch/arm/mach-bcmring/core.c
+++ b/arch/arm/mach-bcmring/core.c
@@ -52,8 +52,8 @@
 #include <mach/csp/chipcHw_inline.h>
 #include <mach/csp/tmrHw_reg.h>
 
-static AMBA_APB_DEVICE(uartA, "uarta", MM_ADDR_IO_UARTA, { IRQ_UARTA }, NULL);
-static AMBA_APB_DEVICE(uartB, "uartb", MM_ADDR_IO_UARTB, { IRQ_UARTB }, NULL);
+static AMBA_APB_DEVICE(uartA, "uartA", 0, MM_ADDR_IO_UARTA, {IRQ_UARTA}, NULL);
+static AMBA_APB_DEVICE(uartB, "uartB", 0, MM_ADDR_IO_UARTB, {IRQ_UARTB}, NULL);
 
 static struct clk pll1_clk = {
 	.name = "PLL1",
diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig
index eb34bd1251d4..ea036d621581 100644
--- a/arch/arm/mach-clps711x/Kconfig
+++ b/arch/arm/mach-clps711x/Kconfig
@@ -1,6 +1,6 @@
 if ARCH_CLPS711X
 
-menu "CLPS711X/EP721X Implementations"
+menu "CLPS711X/EP721X/EP731X Implementations"
 
 config ARCH_AUTCPU12
 	bool "AUTCPU12"
@@ -45,26 +45,13 @@ config ARCH_P720T
 config ARCH_FORTUNET
 	bool "FORTUNET"
 
-# XXX Maybe these should indicate register compatibility
-# instead of being mutually exclusive.
-config ARCH_EP7211
-	bool
-	depends on ARCH_EDB7211
-	default y
-
-config ARCH_EP7212
-	bool
-	depends on ARCH_P720T || ARCH_CEIVA
-	default y
-
 config EP72XX_ROM_BOOT
-	bool "EP72xx ROM boot"
-	depends on ARCH_EP7211 || ARCH_EP7212
-	---help---
+	bool "EP721x/EP731x ROM boot"
+	help
 	  If you say Y here, your CLPS711x-based kernel will use the bootstrap
 	  mode memory map instead of the normal memory map.
 
-	  Processors derived from the Cirrus CLPS-711X core support two boot
+	  Processors derived from the Cirrus CLPS711X core support two boot
 	  modes.  Normal mode boots from the external memory device at CS0.
 	  Bootstrap mode rearranges parts of the memory map, placing an
 	  internal 128 byte bootstrap ROM at CS0.  This option performs the
diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c
index 3c5b5bbf24e5..c965fd8eb31a 100644
--- a/arch/arm/mach-clps711x/common.c
+++ b/arch/arm/mach-clps711x/common.c
@@ -36,7 +36,6 @@
 #include <asm/page.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
-#include <asm/hardware/clps7111.h>
 #include <asm/system_misc.h>
 
 /*
@@ -44,8 +43,8 @@
  */
 static struct map_desc clps711x_io_desc[] __initdata = {
 	{
-		.virtual	= CLPS7111_VIRT_BASE,
-		.pfn		= __phys_to_pfn(CLPS7111_PHYS_BASE),
+		.virtual	= (unsigned long)CLPS711X_VIRT_BASE,
+		.pfn		= __phys_to_pfn(CLPS711X_PHYS_BASE),
 		.length		= SZ_1M,
 		.type		= MT_DEVICE
 	}
@@ -67,12 +66,6 @@ static void int1_mask(struct irq_data *d)
 
 static void int1_ack(struct irq_data *d)
 {
-	u32 intmr1;
-
-	intmr1 = clps_readl(INTMR1);
-	intmr1 &= ~(1 << d->irq);
-	clps_writel(intmr1, INTMR1);
-
 	switch (d->irq) {
 	case IRQ_CSINT:  clps_writel(0, COEOI);  break;
 	case IRQ_TC1OI:  clps_writel(0, TC1EOI); break;
@@ -109,12 +102,6 @@ static void int2_mask(struct irq_data *d)
 
 static void int2_ack(struct irq_data *d)
 {
-	u32 intmr2;
-
-	intmr2 = clps_readl(INTMR2);
-	intmr2 &= ~(1 << (d->irq - 16));
-	clps_writel(intmr2, INTMR2);
-
 	switch (d->irq) {
 	case IRQ_KBDINT: clps_writel(0, KBDEOI); break;
 	}
diff --git a/arch/arm/include/asm/hardware/clps7111.h b/arch/arm/mach-clps711x/include/mach/clps711x.h
index 44477225aed6..1dd806f2847e 100644
--- a/arch/arm/include/asm/hardware/clps7111.h
+++ b/arch/arm/mach-clps711x/include/mach/clps711x.h
@@ -1,8 +1,6 @@
 /*
- *  arch/arm/include/asm/hardware/clps7111.h
- *
- *  This file contains the hardware definitions of the CLPS7111 internal
- *  registers.
+ *  This file contains the hardware definitions of the Cirrus Logic
+ *  ARM7 CLPS711X internal registers.
  *
  *  Copyright (C) 2000 Deep Blue Solutions Ltd.
  *
@@ -20,25 +18,18 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#ifndef __ASM_HARDWARE_CLPS7111_H
-#define __ASM_HARDWARE_CLPS7111_H
-
-#define CLPS7111_PHYS_BASE	(0x80000000)
+#ifndef __MACH_CLPS711X_H
+#define __MACH_CLPS711X_H
 
-#ifndef __ASSEMBLY__
-#define clps_readb(off)		__raw_readb(CLPS7111_BASE + (off))
-#define clps_readw(off)		__raw_readw(CLPS7111_BASE + (off))
-#define clps_readl(off)		__raw_readl(CLPS7111_BASE + (off))
-#define clps_writeb(val,off)	__raw_writeb(val, CLPS7111_BASE + (off))
-#define clps_writew(val,off)	__raw_writew(val, CLPS7111_BASE + (off))
-#define clps_writel(val,off)	__raw_writel(val, CLPS7111_BASE + (off))
-#endif
+#define CLPS711X_PHYS_BASE	(0x80000000)
 
 #define PADR		(0x0000)
 #define PBDR		(0x0001)
+#define PCDR		(0x0002)
 #define PDDR		(0x0003)
 #define PADDR		(0x0040)
 #define PBDDR		(0x0041)
+#define PCDDR		(0x0042)
 #define PDDDR		(0x0043)
 #define PEDR		(0x0080)
 #define PEDDR		(0x00c0)
@@ -50,7 +41,7 @@
 #define INTSR1		(0x0240)
 #define INTMR1		(0x0280)
 #define LCDCON		(0x02c0)
-#define TC1D            (0x0300)
+#define TC1D		(0x0300)
 #define TC2D		(0x0340)
 #define RTCDR		(0x0380)
 #define RTCMR		(0x03c0)
@@ -85,6 +76,26 @@
 #define SS2POP		(0x16c0)
 #define KBDEOI		(0x1700)
 
+#define DAIR		(0x2000)
+#define DAIR0		(0x2040)
+#define DAIDR1		(0x2080)
+#define DAIDR2		(0x20c0)
+#define DAISR		(0x2100)
+#define SYSCON3		(0x2200)
+#define INTSR3		(0x2240)
+#define INTMR3		(0x2280)
+#define LEDFLSH		(0x22c0)
+#define SDCONF		(0x2300)
+#define SDRFPR		(0x2340)
+#define UNIQID		(0x2440)
+#define DAI64FS		(0x2600)
+#define PLLW		(0x2610)
+#define PLLR		(0xa5a8)
+#define RANDID0		(0x2700)
+#define RANDID1		(0x2704)
+#define RANDID2		(0x2708)
+#define RANDID3		(0x270c)
+
 /* common bits: SYSCON1 / SYSCON2 */
 #define SYSCON_UARTEN		(1 << 8)
 
@@ -131,6 +142,8 @@
 #define SYSFLG1_CTXFF		(1 << 25)
 #define SYSFLG1_SSIBUSY		(1 << 26)
 #define SYSFLG1_ID		(1 << 29)
+#define SYSFLG1_VERID(x)	(((x) >> 30) & 3)
+#define SYSFLG1_VERID_MASK	(3 << 30)
 
 #define SYSFLG2_SSRXOF		(1 << 0)
 #define SYSFLG2_RESVAL		(1 << 1)
@@ -178,7 +191,88 @@
 #define UBRLCR_WRDLEN8		(3 << 17)
 #define UBRLCR_WRDLEN_MASK	(3 << 17)
 
+#define SYNCIO_FRMLEN(x)	(((x) & 0x3f) << 7)
+#define SYNCIO_CFGLEN(x)	((x) & 0x7f)
 #define SYNCIO_SMCKEN		(1 << 13)
 #define SYNCIO_TXFRMEN		(1 << 14)
 
-#endif /* __ASM_HARDWARE_CLPS7111_H */
+#define DAIR_RESERVED		(0x0404)
+#define DAIR_DAIEN		(1 << 16)
+#define DAIR_ECS		(1 << 17)
+#define DAIR_LCTM		(1 << 19)
+#define DAIR_LCRM		(1 << 20)
+#define DAIR_RCTM		(1 << 21)
+#define DAIR_RCRM		(1 << 22)
+#define DAIR_LBM		(1 << 23)
+
+#define DAIDR2_FIFOEN		(1 << 15)
+#define DAIDR2_FIFOLEFT		(0x0d << 16)
+#define DAIDR2_FIFORIGHT	(0x11 << 16)
+
+#define DAISR_RCTS		(1 << 0)
+#define DAISR_RCRS		(1 << 1)
+#define DAISR_LCTS		(1 << 2)
+#define DAISR_LCRS		(1 << 3)
+#define DAISR_RCTU		(1 << 4)
+#define DAISR_RCRO		(1 << 5)
+#define DAISR_LCTU		(1 << 6)
+#define DAISR_LCRO		(1 << 7)
+#define DAISR_RCNF		(1 << 8)
+#define DAISR_RCNE		(1 << 9)
+#define DAISR_LCNF		(1 << 10)
+#define DAISR_LCNE		(1 << 11)
+#define DAISR_FIFO		(1 << 12)
+
+#define DAI64FS_I2SF64		(1 << 0)
+#define DAI64FS_AUDIOCLKEN	(1 << 1)
+#define DAI64FS_AUDIOCLKSRC	(1 << 2)
+#define DAI64FS_MCLK256EN	(1 << 3)
+#define DAI64FS_LOOPBACK	(1 << 5)
+
+#define SYSCON3_ADCCON		(1 << 0)
+#define SYSCON3_CLKCTL0		(1 << 1)
+#define SYSCON3_CLKCTL1		(1 << 2)
+#define SYSCON3_DAISEL		(1 << 3)
+#define SYSCON3_ADCCKNSEN	(1 << 4)
+#define SYSCON3_VERSN(x)	(((x) >> 5) & 7)
+#define SYSCON3_VERSN_MASK	(7 << 5)
+#define SYSCON3_FASTWAKE	(1 << 8)
+#define SYSCON3_DAIEN		(1 << 9)
+#define SYSCON3_128FS		SYSCON3_DAIEN
+#define SYSCON3_ENPD67		(1 << 10)
+
+#define SDCONF_ACTIVE		(1 << 10)
+#define SDCONF_CLKCTL		(1 << 9)
+#define SDCONF_WIDTH_4		(0 << 7)
+#define SDCONF_WIDTH_8		(1 << 7)
+#define SDCONF_WIDTH_16		(2 << 7)
+#define SDCONF_WIDTH_32		(3 << 7)
+#define SDCONF_SIZE_16		(0 << 5)
+#define SDCONF_SIZE_64		(1 << 5)
+#define SDCONF_SIZE_128		(2 << 5)
+#define SDCONF_SIZE_256		(3 << 5)
+#define SDCONF_CASLAT_2		(2)
+#define SDCONF_CASLAT_3		(3)
+
+#define MEMCFG_BUS_WIDTH_32	(1)
+#define MEMCFG_BUS_WIDTH_16	(0)
+#define MEMCFG_BUS_WIDTH_8	(3)
+
+#define MEMCFG_WAITSTATE_8_3	(0 << 2)
+#define MEMCFG_WAITSTATE_7_3	(1 << 2)
+#define MEMCFG_WAITSTATE_6_3	(2 << 2)
+#define MEMCFG_WAITSTATE_5_3	(3 << 2)
+#define MEMCFG_WAITSTATE_4_2	(4 << 2)
+#define MEMCFG_WAITSTATE_3_2	(5 << 2)
+#define MEMCFG_WAITSTATE_2_2	(6 << 2)
+#define MEMCFG_WAITSTATE_1_2	(7 << 2)
+#define MEMCFG_WAITSTATE_8_1	(8 << 2)
+#define MEMCFG_WAITSTATE_7_1	(9 << 2)
+#define MEMCFG_WAITSTATE_6_1	(10 << 2)
+#define MEMCFG_WAITSTATE_5_1	(11 << 2)
+#define MEMCFG_WAITSTATE_4_0	(12 << 2)
+#define MEMCFG_WAITSTATE_3_0	(13 << 2)
+#define MEMCFG_WAITSTATE_2_0	(14 << 2)
+#define MEMCFG_WAITSTATE_1_0	(15 << 2)
+
+#endif /* __MACH_CLPS711X_H */
diff --git a/arch/arm/mach-clps711x/include/mach/debug-macro.S b/arch/arm/mach-clps711x/include/mach/debug-macro.S
index b802e8a51831..118b3d930573 100644
--- a/arch/arm/mach-clps711x/include/mach/debug-macro.S
+++ b/arch/arm/mach-clps711x/include/mach/debug-macro.S
@@ -12,7 +12,6 @@
 */
 
 #include <mach/hardware.h>
-#include <asm/hardware/clps7111.h>
 
 		.macro	addruart, rp, rv, tmp
 #ifndef CONFIG_DEBUG_CLPS711X_UART2
@@ -20,8 +19,8 @@
 #else
 		mov	\rp, #0x1000	@ UART2
 #endif
-		orr	\rv, \rp, #CLPS7111_VIRT_BASE
-		orr	\rp, \rp, #CLPS7111_PHYS_BASE
+		orr	\rv, \rp, #CLPS711X_VIRT_BASE
+		orr	\rp, \rp, #CLPS711X_PHYS_BASE
 		.endm
 
 		.macro	senduart,rd,rx
diff --git a/arch/arm/mach-clps711x/include/mach/entry-macro.S b/arch/arm/mach-clps711x/include/mach/entry-macro.S
index 125af59d7a29..56e5c2c23504 100644
--- a/arch/arm/mach-clps711x/include/mach/entry-macro.S
+++ b/arch/arm/mach-clps711x/include/mach/entry-macro.S
@@ -8,7 +8,6 @@
  * warranty of any kind, whether express or implied.
  */
 #include <mach/hardware.h>
-#include <asm/hardware/clps7111.h>
 
 		.macro	get_irqnr_preamble, base, tmp
 		.endm
@@ -18,7 +17,7 @@
 #endif
 
 		.macro	get_irqnr_and_base, irqnr, stat, base, mask
-		mov	\base, #CLPS7111_BASE
+		mov	\base, #CLPS711X_VIRT_BASE
 		ldr	\stat, [\base, #INTSR1]
 		ldr	\mask, [\base, #INTMR1]
 		mov	\irqnr, #4
diff --git a/arch/arm/mach-clps711x/include/mach/hardware.h b/arch/arm/mach-clps711x/include/mach/hardware.h
index d0b7d870be9c..13a64fcd7dd1 100644
--- a/arch/arm/mach-clps711x/include/mach/hardware.h
+++ b/arch/arm/mach-clps711x/include/mach/hardware.h
@@ -19,12 +19,21 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
+#ifndef __MACH_HARDWARE_H
+#define __MACH_HARDWARE_H
 
+#include <mach/clps711x.h>
 
-#define CLPS7111_VIRT_BASE	0xff000000
-#define CLPS7111_BASE		CLPS7111_VIRT_BASE
+#define CLPS711X_VIRT_BASE	IOMEM(0xff000000)
+
+#ifndef __ASSEMBLY__
+#define clps_readb(off)		readb(CLPS711X_VIRT_BASE + (off))
+#define clps_readw(off)		readw(CLPS711X_VIRT_BASE + (off))
+#define clps_readl(off)		readl(CLPS711X_VIRT_BASE + (off))
+#define clps_writeb(val,off)	writeb(val, CLPS711X_VIRT_BASE + (off))
+#define clps_writew(val,off)	writew(val, CLPS711X_VIRT_BASE + (off))
+#define clps_writel(val,off)	writel(val, CLPS711X_VIRT_BASE + (off))
+#endif
 
 /*
  * The physical addresses that the external chip select signals map to is
@@ -52,46 +61,11 @@
 #define CS7_PHYS_BASE		(0x00000000)
 #endif
 
-#if defined (CONFIG_ARCH_EP7211)
-
-#define EP7211_VIRT_BASE	CLPS7111_VIRT_BASE
-#define EP7211_BASE		CLPS7111_VIRT_BASE
-#include <asm/hardware/ep7211.h>
-
-#elif defined (CONFIG_ARCH_EP7212)
-
-#define EP7212_VIRT_BASE	CLPS7111_VIRT_BASE
-#define EP7212_BASE		CLPS7111_VIRT_BASE
-#include <asm/hardware/ep7212.h>
-
-#endif
-
 #define SYSPLD_VIRT_BASE	0xfe000000
 #define SYSPLD_BASE		SYSPLD_VIRT_BASE
 
-#if  defined (CONFIG_ARCH_AUTCPU12)
-
-#define  CS89712_VIRT_BASE	CLPS7111_VIRT_BASE
-#define  CS89712_BASE		CLPS7111_VIRT_BASE
-
-#include <asm/hardware/clps7111.h>
-#include <asm/hardware/ep7212.h>
-#include <asm/hardware/cs89712.h>
-
-#endif
-
-
 #if defined (CONFIG_ARCH_CDB89712)
 
-#include <asm/hardware/clps7111.h>
-#include <asm/hardware/ep7212.h>
-#include <asm/hardware/cs89712.h>
-
-/* static cdb89712_map_io() areas */
-#define REGISTER_START   0x80000000
-#define REGISTER_SIZE    0x4000
-#define REGISTER_BASE    0xff000000
-
 #define ETHER_START      0x20000000
 #define ETHER_SIZE       0x1000
 #define ETHER_BASE       0xfe000000
@@ -154,13 +128,6 @@
 
 #if defined (CONFIG_ARCH_CEIVA)
 
-#define  CEIVA_VIRT_BASE	CLPS7111_VIRT_BASE
-#define  CEIVA_BASE		CLPS7111_VIRT_BASE
-
-#include <asm/hardware/clps7111.h>
-#include <asm/hardware/ep7212.h>
-
-
 /*
  * The two flash banks are wired to chip selects 0 and 1. This is the mapping
  * for them.
diff --git a/arch/arm/mach-clps711x/include/mach/irqs.h b/arch/arm/mach-clps711x/include/mach/irqs.h
index 30b7e97285a4..14d215f8ca81 100644
--- a/arch/arm/mach-clps711x/include/mach/irqs.h
+++ b/arch/arm/mach-clps711x/include/mach/irqs.h
@@ -35,7 +35,6 @@
 #define IRQ_SSEOTI			15
 
 #define INT1_IRQS			(0x0000fff0)
-#define INT1_ACK_IRQS			(0x00004f10)
 
 /*
  * Interrupts from INTSR2
@@ -47,7 +46,5 @@
 #define IRQ_URXINT2			(16+13)	/* bit 13 */
 
 #define INT2_IRQS			(0x30070000)
-#define INT2_ACK_IRQS			(0x00010000)
-
-#define NR_IRQS                         30
 
+#define NR_IRQS				30
diff --git a/arch/arm/mach-clps711x/include/mach/time.h b/arch/arm/mach-clps711x/include/mach/time.h
deleted file mode 100644
index 61fef9129c6a..000000000000
--- a/arch/arm/mach-clps711x/include/mach/time.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- *  arch/arm/mach-clps711x/include/mach/time.h
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <asm/leds.h>
-#include <asm/hardware/clps7111.h>
-
-extern void clps711x_setup_timer(void);
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t
-p720t_timer_interrupt(int irq, void *dev_id)
-{
-	struct pt_regs *regs = get_irq_regs();
-	do_leds();
-	xtime_update(1);
-#ifndef CONFIG_SMP
-	update_process_times(user_mode(regs));
-#endif
-	do_profile(regs);
-	return IRQ_HANDLED;
-}
-
-/*
- * Set up timer interrupt, and return the current time in seconds.
- */
-void __init time_init(void)
-{
-	clps711x_setup_timer();
-	timer_irq.handler = p720t_timer_interrupt;
-	setup_irq(IRQ_TC2OI, &timer_irq);
-}
diff --git a/arch/arm/mach-clps711x/include/mach/uncompress.h b/arch/arm/mach-clps711x/include/mach/uncompress.h
index 35ed731b9f16..7b28d6a47690 100644
--- a/arch/arm/mach-clps711x/include/mach/uncompress.h
+++ b/arch/arm/mach-clps711x/include/mach/uncompress.h
@@ -17,14 +17,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#include <mach/hardware.h>
-#include <asm/hardware/clps7111.h>
-
-#undef CLPS7111_BASE
-#define CLPS7111_BASE CLPS7111_PHYS_BASE
-
-#define __raw_readl(p)		(*(unsigned long *)(p))
-#define __raw_writel(v,p)	(*(unsigned long *)(p) = (v))
+#include <mach/clps711x.h>
 
 #ifdef CONFIG_DEBUG_CLPS711X_UART2
 #define SYSFLGx	SYSFLG2
@@ -34,19 +27,25 @@
 #define UARTDRx	UARTDR1
 #endif
 
+#define phys_reg(x)	(*(volatile u32 *)(CLPS711X_PHYS_BASE + (x)))
+
 /*
+ * The following code assumes the serial port has already been
+ * initialized by the bootloader.  If you didn't setup a port in
+ * your bootloader then nothing will appear (which might be desired).
+ *
  * This does not append a newline
  */
 static inline void putc(int c)
 {
-	while (clps_readl(SYSFLGx) & SYSFLG_UTXFF)
+	while (phys_reg(SYSFLGx) & SYSFLG_UTXFF)
 		barrier();
-	clps_writel(c, UARTDRx);
+	phys_reg(UARTDRx) = c;
 }
 
 static inline void flush(void)
 {
-	while (clps_readl(SYSFLGx) & SYSFLG_UBUSY)
+	while (phys_reg(SYSFLGx) & SYSFLG_UBUSY)
 		barrier();
 }
 
diff --git a/arch/arm/mach-clps711x/p720t-leds.c b/arch/arm/mach-clps711x/p720t-leds.c
index dd9a6cdbeb02..bbc449fbe14a 100644
--- a/arch/arm/mach-clps711x/p720t-leds.c
+++ b/arch/arm/mach-clps711x/p720t-leds.c
@@ -27,9 +27,6 @@
 #include <asm/leds.h>
 #include <asm/mach-types.h>
 
-#include <asm/hardware/clps7111.h>
-#include <asm/hardware/ep7212.h>
-
 static void p720t_leds_event(led_event_t ledevt)
 {
 	unsigned long flags;
diff --git a/arch/arm/mach-cns3xxx/pcie.c b/arch/arm/mach-cns3xxx/pcie.c
index 79d001f831e0..311328314163 100644
--- a/arch/arm/mach-cns3xxx/pcie.c
+++ b/arch/arm/mach-cns3xxx/pcie.c
@@ -166,12 +166,6 @@ static struct pci_ops cns3xxx_pcie_ops = {
 	.write = cns3xxx_pci_write_config,
 };
 
-static struct pci_bus *cns3xxx_pci_scan_bus(int nr, struct pci_sys_data *sys)
-{
-	return pci_scan_root_bus(NULL, sys->busnr, &cns3xxx_pcie_ops, sys,
-				 &sys->resources);
-}
-
 static int cns3xxx_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
 	struct cns3xxx_pcie *cnspci = pdev_to_cnspci(dev);
@@ -221,10 +215,9 @@ static struct cns3xxx_pcie cns3xxx_pcie[] = {
 		.irqs = { IRQ_CNS3XXX_PCIE0_RC, IRQ_CNS3XXX_PCIE0_DEVICE, },
 		.hw_pci = {
 			.domain = 0,
-			.swizzle = pci_std_swizzle,
 			.nr_controllers = 1,
+			.ops = &cns3xxx_pcie_ops,
 			.setup = cns3xxx_pci_setup,
-			.scan = cns3xxx_pci_scan_bus,
 			.map_irq = cns3xxx_pcie_map_irq,
 		},
 	},
@@ -264,10 +257,9 @@ static struct cns3xxx_pcie cns3xxx_pcie[] = {
 		.irqs = { IRQ_CNS3XXX_PCIE1_RC, IRQ_CNS3XXX_PCIE1_DEVICE, },
 		.hw_pci = {
 			.domain = 1,
-			.swizzle = pci_std_swizzle,
 			.nr_controllers = 1,
+			.ops = &cns3xxx_pcie_ops,
 			.setup = cns3xxx_pci_setup,
-			.scan = cns3xxx_pci_scan_bus,
 			.map_irq = cns3xxx_pcie_map_irq,
 		},
 	},
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index dc1afe5be20c..0031864e7f11 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -681,6 +681,7 @@ MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP-L137/AM17x EVM")
 	.init_irq	= cp_intc_init,
 	.timer		= &davinci_timer,
 	.init_machine	= da830_evm_init,
+	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
 	.restart	= da8xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index a70de24d1cbc..0149fb453be3 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -284,7 +284,7 @@ static struct platform_device da850_evm_nandflash_device = {
 	.resource	= da850_evm_nandflash_resource,
 };
 
-static struct platform_device *da850_evm_devices[] __initdata = {
+static struct platform_device *da850_evm_devices[] = {
 	&da850_evm_nandflash_device,
 	&da850_evm_norflash_device,
 };
@@ -1411,6 +1411,7 @@ MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138/AM18x EVM")
 	.init_irq	= cp_intc_init,
 	.timer		= &davinci_timer,
 	.init_machine	= da850_evm_init,
+	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
 	.restart	= da8xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index 82ed753fb360..1c7b1f46a8f3 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -357,6 +357,7 @@ MACHINE_START(DAVINCI_DM355_EVM, "DaVinci DM355 EVM")
 	.init_irq     = davinci_irq_init,
 	.timer	      = &davinci_timer,
 	.init_machine = dm355_evm_init,
+	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
 	.restart	= davinci_restart,
 MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
index d74a8b3445fb..8e7703213b08 100644
--- a/arch/arm/mach-davinci/board-dm355-leopard.c
+++ b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -276,6 +276,7 @@ MACHINE_START(DM355_LEOPARD, "DaVinci DM355 leopard")
 	.init_irq     = davinci_irq_init,
 	.timer	      = &davinci_timer,
 	.init_machine = dm355_leopard_init,
+	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
 	.restart	= davinci_restart,
 MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 5bce2b83bb4f..688a9c556dc9 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -618,6 +618,7 @@ MACHINE_START(DAVINCI_DM365_EVM, "DaVinci DM365 EVM")
 	.init_irq	= davinci_irq_init,
 	.timer		= &davinci_timer,
 	.init_machine	= dm365_evm_init,
+	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
 	.restart	= davinci_restart,
 MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 3683306e0245..d34ed55912b2 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -825,6 +825,7 @@ MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM")
 	.init_irq     = davinci_irq_init,
 	.timer	      = &davinci_timer,
 	.init_machine = davinci_evm_init,
+	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
 	.restart	= davinci_restart,
 MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index d72ab948d630..958679a20e13 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -788,6 +788,7 @@ MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM")
 	.init_irq     = davinci_irq_init,
 	.timer        = &davinci_timer,
 	.init_machine = evm_init,
+	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
 	.restart	= davinci_restart,
 MACHINE_END
@@ -798,6 +799,7 @@ MACHINE_START(DAVINCI_DM6467TEVM, "DaVinci DM6467T EVM")
 	.init_irq     = davinci_irq_init,
 	.timer        = &davinci_timer,
 	.init_machine = evm_init,
+	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
 	.restart	= davinci_restart,
 MACHINE_END
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index 672d820e2aa4..beecde3a1d2f 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -572,6 +572,7 @@ MACHINE_START(MITYOMAPL138, "MityDSP-L138/MityARM-1808")
 	.init_irq	= cp_intc_init,
 	.timer		= &davinci_timer,
 	.init_machine	= mityomapl138_init,
+	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
 	.restart	= da8xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
index a772bb45570a..5de69f2fcca9 100644
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -278,6 +278,7 @@ MACHINE_START(NEUROS_OSD2, "Neuros OSD2")
 	.init_irq	= davinci_irq_init,
 	.timer		= &davinci_timer,
 	.init_machine = davinci_ntosd2_init,
+	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
 	.restart	= davinci_restart,
 MACHINE_END
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index 45e815760a27..dc1208e9e664 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -343,6 +343,7 @@ MACHINE_START(OMAPL138_HAWKBOARD, "AM18x/OMAP-L138 Hawkboard")
 	.init_irq	= cp_intc_init,
 	.timer		= &davinci_timer,
 	.init_machine	= omapl138_hawk_init,
+	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
 	.restart	= da8xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c
index 76e675096104..9078acf94bac 100644
--- a/arch/arm/mach-davinci/board-sffsdr.c
+++ b/arch/arm/mach-davinci/board-sffsdr.c
@@ -157,6 +157,7 @@ MACHINE_START(SFFSDR, "Lyrtech SFFSDR")
 	.init_irq     = davinci_irq_init,
 	.timer	      = &davinci_timer,
 	.init_machine = davinci_sffsdr_init,
+	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
 	.restart	= davinci_restart,
 MACHINE_END
diff --git a/arch/arm/mach-davinci/board-tnetv107x-evm.c b/arch/arm/mach-davinci/board-tnetv107x-evm.c
index 5f14e30b00d8..ac4e003ad863 100644
--- a/arch/arm/mach-davinci/board-tnetv107x-evm.c
+++ b/arch/arm/mach-davinci/board-tnetv107x-evm.c
@@ -282,6 +282,7 @@ MACHINE_START(TNETV107X, "TNETV107X EVM")
 	.init_irq	= cp_intc_init,
 	.timer		= &davinci_timer,
 	.init_machine	= tnetv107x_evm_board_init,
+	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
 	.restart	= tnetv107x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c
index 008772e3b843..34668ead53c7 100644
--- a/arch/arm/mach-davinci/clock.c
+++ b/arch/arm/mach-davinci/clock.c
@@ -213,7 +213,7 @@ EXPORT_SYMBOL(clk_unregister);
 /*
  * Disable any unused clocks left on by the bootloader
  */
-static int __init clk_disable_unused(void)
+int __init davinci_clk_disable_unused(void)
 {
 	struct clk *ck;
 
@@ -237,7 +237,6 @@ static int __init clk_disable_unused(void)
 
 	return 0;
 }
-late_initcall(clk_disable_unused);
 #endif
 
 static unsigned long clk_sysclk_recalc(struct clk *clk)
diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c
index cb9b2e47510c..64b0f65a8639 100644
--- a/arch/arm/mach-davinci/common.c
+++ b/arch/arm/mach-davinci/common.c
@@ -117,3 +117,10 @@ void __init davinci_common_init(struct davinci_soc_info *soc_info)
 err:
 	panic("davinci_common_init: SoC Initialization failed\n");
 }
+
+void __init davinci_init_late(void)
+{
+	davinci_cpufreq_init();
+	davinci_pm_init();
+	davinci_clk_disable_unused();
+}
diff --git a/arch/arm/mach-davinci/cpufreq.c b/arch/arm/mach-davinci/cpufreq.c
index 031048fec9f5..4729eaab0f40 100644
--- a/arch/arm/mach-davinci/cpufreq.c
+++ b/arch/arm/mach-davinci/cpufreq.c
@@ -240,10 +240,9 @@ static struct platform_driver davinci_cpufreq_driver = {
 	.remove = __exit_p(davinci_cpufreq_remove),
 };
 
-static int __init davinci_cpufreq_init(void)
+int __init davinci_cpufreq_init(void)
 {
 	return platform_driver_probe(&davinci_cpufreq_driver,
 							davinci_cpufreq_probe);
 }
-late_initcall(davinci_cpufreq_init);
 
diff --git a/arch/arm/mach-davinci/davinci.h b/arch/arm/mach-davinci/davinci.h
index 3e519dad5bb9..8db0fc6809dd 100644
--- a/arch/arm/mach-davinci/davinci.h
+++ b/arch/arm/mach-davinci/davinci.h
@@ -72,7 +72,7 @@ void davinci_map_sysmod(void);
 /* DM355 function declarations */
 void __init dm355_init(void);
 void dm355_init_spi0(unsigned chipselect_mask,
-		struct spi_board_info *info, unsigned len);
+		const struct spi_board_info *info, unsigned len);
 void __init dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata);
 void dm355_set_vpfe_config(struct vpfe_config *cfg);
 
@@ -83,7 +83,7 @@ void __init dm365_init_vc(struct snd_platform_data *pdata);
 void __init dm365_init_ks(struct davinci_ks_platform_data *pdata);
 void __init dm365_init_rtc(void);
 void dm365_init_spi0(unsigned chipselect_mask,
-			struct spi_board_info *info, unsigned len);
+			const struct spi_board_info *info, unsigned len);
 void dm365_set_vpfe_config(struct vpfe_config *cfg);
 
 /* DM644x function declarations */
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index 42dbf3dc11ab..d1624a315c9a 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -831,7 +831,7 @@ static struct platform_device da8xx_spi_device[] = {
 	},
 };
 
-int __init da8xx_register_spi(int instance, struct spi_board_info *info,
+int __init da8xx_register_spi(int instance, const struct spi_board_info *info,
 			      unsigned len)
 {
 	int ret;
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index fd3d09aa6cde..678cd99b7336 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -424,7 +424,7 @@ static struct platform_device dm355_spi0_device = {
 };
 
 void __init dm355_init_spi0(unsigned chipselect_mask,
-		struct spi_board_info *info, unsigned len)
+		const struct spi_board_info *info, unsigned len)
 {
 	/* for now, assume we need MISO */
 	davinci_cfg_reg(DM355_SPI0_SDI);
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index 1a2e953082b3..a50d49de1883 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -676,7 +676,7 @@ static struct platform_device dm365_spi0_device = {
 };
 
 void __init dm365_init_spi0(unsigned chipselect_mask,
-		struct spi_board_info *info, unsigned len)
+		const struct spi_board_info *info, unsigned len)
 {
 	davinci_cfg_reg(DM365_SPI0_SCLK);
 	davinci_cfg_reg(DM365_SPI0_SDI);
diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/mach-davinci/dma.c
index fd33919c95d4..a685e9706b7b 100644
--- a/arch/arm/mach-davinci/dma.c
+++ b/arch/arm/mach-davinci/dma.c
@@ -353,9 +353,10 @@ static int irq2ctlr(int irq)
  *****************************************************************************/
 static irqreturn_t dma_irq_handler(int irq, void *data)
 {
-	int i;
 	int ctlr;
-	unsigned int cnt = 0;
+	u32 sh_ier;
+	u32 sh_ipr;
+	u32 bank;
 
 	ctlr = irq2ctlr(irq);
 	if (ctlr < 0)
@@ -363,41 +364,39 @@ static irqreturn_t dma_irq_handler(int irq, void *data)
 
 	dev_dbg(data, "dma_irq_handler\n");
 
-	if ((edma_shadow0_read_array(ctlr, SH_IPR, 0) == 0) &&
-	    (edma_shadow0_read_array(ctlr, SH_IPR, 1) == 0))
-		return IRQ_NONE;
+	sh_ipr = edma_shadow0_read_array(ctlr, SH_IPR, 0);
+	if (!sh_ipr) {
+		sh_ipr = edma_shadow0_read_array(ctlr, SH_IPR, 1);
+		if (!sh_ipr)
+			return IRQ_NONE;
+		sh_ier = edma_shadow0_read_array(ctlr, SH_IER, 1);
+		bank = 1;
+	} else {
+		sh_ier = edma_shadow0_read_array(ctlr, SH_IER, 0);
+		bank = 0;
+	}
 
-	while (1) {
-		int j;
-		if (edma_shadow0_read_array(ctlr, SH_IPR, 0) &
-				edma_shadow0_read_array(ctlr, SH_IER, 0))
-			j = 0;
-		else if (edma_shadow0_read_array(ctlr, SH_IPR, 1) &
-				edma_shadow0_read_array(ctlr, SH_IER, 1))
-			j = 1;
-		else
-			break;
-		dev_dbg(data, "IPR%d %08x\n", j,
-				edma_shadow0_read_array(ctlr, SH_IPR, j));
-		for (i = 0; i < 32; i++) {
-			int k = (j << 5) + i;
-			if ((edma_shadow0_read_array(ctlr, SH_IPR, j) & BIT(i))
-					&& (edma_shadow0_read_array(ctlr,
-							SH_IER, j) & BIT(i))) {
-				/* Clear the corresponding IPR bits */
-				edma_shadow0_write_array(ctlr, SH_ICR, j,
-							BIT(i));
-				if (edma_cc[ctlr]->intr_data[k].callback)
-					edma_cc[ctlr]->intr_data[k].callback(
-						k, DMA_COMPLETE,
-						edma_cc[ctlr]->intr_data[k].
-						data);
-			}
+	do {
+		u32 slot;
+		u32 channel;
+
+		dev_dbg(data, "IPR%d %08x\n", bank, sh_ipr);
+
+		slot = __ffs(sh_ipr);
+		sh_ipr &= ~(BIT(slot));
+
+		if (sh_ier & BIT(slot)) {
+			channel = (bank << 5) | slot;
+			/* Clear the corresponding IPR bits */
+			edma_shadow0_write_array(ctlr, SH_ICR, bank,
+					BIT(slot));
+			if (edma_cc[ctlr]->intr_data[channel].callback)
+				edma_cc[ctlr]->intr_data[channel].callback(
+					channel, DMA_COMPLETE,
+					edma_cc[ctlr]->intr_data[channel].data);
 		}
-		cnt++;
-		if (cnt > 10)
-			break;
-	}
+	} while (sh_ipr);
+
 	edma_shadow0_write(ctlr, SH_IEVAL, 1);
 	return IRQ_HANDLED;
 }
@@ -557,9 +556,9 @@ static int reserve_contiguous_slots(int ctlr, unsigned int id,
 	if (i == edma_cc[ctlr]->num_slots)
 		stop_slot = i;
 
-	for (j = start_slot; j < stop_slot; j++)
-		if (test_bit(j, tmp_inuse))
-			clear_bit(j, edma_cc[ctlr]->edma_inuse);
+	j = start_slot;
+	for_each_set_bit_from(j, tmp_inuse, stop_slot)
+		clear_bit(j, edma_cc[ctlr]->edma_inuse);
 
 	if (count)
 		return -EBUSY;
diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h
index 5cd39a4e0c96..bdc4aa8e672a 100644
--- a/arch/arm/mach-davinci/include/mach/common.h
+++ b/arch/arm/mach-davinci/include/mach/common.h
@@ -84,6 +84,25 @@ extern struct davinci_soc_info davinci_soc_info;
 extern void davinci_common_init(struct davinci_soc_info *soc_info);
 extern void davinci_init_ide(void);
 void davinci_restart(char mode, const char *cmd);
+void davinci_init_late(void);
+
+#ifdef CONFIG_DAVINCI_RESET_CLOCKS
+int davinci_clk_disable_unused(void);
+#else
+static inline int davinci_clk_disable_unused(void) { return 0; }
+#endif
+
+#ifdef CONFIG_CPU_FREQ
+int davinci_cpufreq_init(void);
+#else
+static inline int davinci_cpufreq_init(void) { return 0; }
+#endif
+
+#ifdef CONFIG_SUSPEND
+int davinci_pm_init(void);
+#else
+static inline int davinci_pm_init(void) { return 0; }
+#endif
 
 /* standard place to map on-chip SRAMs; they *may* support DMA */
 #define SRAM_VIRT	0xfffe0000
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index ee3461d7ec1b..a2f1f274f189 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -76,7 +76,8 @@ void __init da850_init(void);
 int da830_register_edma(struct edma_rsv_info *rsv);
 int da850_register_edma(struct edma_rsv_info *rsv[2]);
 int da8xx_register_i2c(int instance, struct davinci_i2c_platform_data *pdata);
-int da8xx_register_spi(int instance, struct spi_board_info *info, unsigned len);
+int da8xx_register_spi(int instance,
+		const struct spi_board_info *info, unsigned len);
 int da8xx_register_watchdog(void);
 int da8xx_register_usb20(unsigned mA, unsigned potpgt);
 int da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata);
diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S
index cf94552d5274..34290d14754b 100644
--- a/arch/arm/mach-davinci/include/mach/debug-macro.S
+++ b/arch/arm/mach-davinci/include/mach/debug-macro.S
@@ -22,46 +22,28 @@
 
 #define UART_SHIFT	2
 
-		.pushsection .data
-davinci_uart_phys:	.word	0
-davinci_uart_virt:	.word	0
-		.popsection
-
-		.macro addruart, rp, rv, tmp
-
-		/* Use davinci_uart_phys/virt if already configured */
-10:		adr	\rp, 99f		@ get effective addr of 99f
-		ldr	\rv, [\rp]		@ get absolute addr of 99f
-		sub	\rv, \rv, \rp		@ offset between the two
-		ldr	\rp, [\rp, #4]		@ abs addr of omap_uart_phys
-		sub	\tmp, \rp, \rv		@ make it effective
-		ldr	\rp, [\tmp, #0]		@ davinci_uart_phys
-		ldr	\rv, [\tmp, #4]		@ davinci_uart_virt
-		cmp	\rp, #0			@ is port configured?
-		cmpne	\rv, #0
-		bne	100f			@ already configured
-
-		/* Check the debug UART address set in uncompress.h */
-		and	\rp, pc, #0xff000000
-		ldr	\rv, =DAVINCI_UART_INFO_OFS
-		add	\rp, \rp, \rv
-
-		/* Copy uart phys address from decompressor uart info */
-		ldr	\rv, [\rp, #0]
-		str	\rv, [\tmp, #0]
-
-		/* Copy uart virt address from decompressor uart info */
-		ldr	\rv, [\rp, #4]
-		str	\rv, [\tmp, #4]
-
-		b	10b
+#if defined(CONFIG_DEBUG_DAVINCI_DMx_UART0)
+#define UART_BASE	DAVINCI_UART0_BASE
+#elif defined(CONFIG_DEBUG_DAVINCI_DA8XX_UART0)
+#define UART_BASE	DA8XX_UART0_BASE
+#elif defined(CONFIG_DEBUG_DAVINCI_DA8XX_UART1)
+#define UART_BASE	DA8XX_UART1_BASE
+#elif defined(CONFIG_DEBUG_DAVINCI_DA8XX_UART2)
+#define UART_BASE	DA8XX_UART2_BASE
+#elif defined(CONFIG_DEBUG_DAVINCI_TNETV107X_UART1)
+#define UART_BASE	TNETV107X_UART2_BASE
+#define UART_VIRTBASE	TNETV107X_UART2_VIRT
+#else
+#error "Select a specifc port for DEBUG_LL"
+#endif
 
-		.align
-99:		.word	.
-		.word	davinci_uart_phys
-		.ltorg
+#ifndef UART_VIRTBASE
+#define UART_VIRTBASE	IO_ADDRESS(UART_BASE)
+#endif
 
-100:
+		.macro addruart, rp, rv, tmp
+		ldr	\rp, =UART_BASE
+		ldr	\rv, =UART_VIRTBASE
 		.endm
 
 		.macro	senduart,rd,rx
diff --git a/arch/arm/mach-davinci/include/mach/hardware.h b/arch/arm/mach-davinci/include/mach/hardware.h
index 2184691ebc2f..16bb42291d39 100644
--- a/arch/arm/mach-davinci/include/mach/hardware.h
+++ b/arch/arm/mach-davinci/include/mach/hardware.h
@@ -22,7 +22,7 @@
 /*
  * I/O mapping
  */
-#define IO_PHYS				0x01c00000UL
+#define IO_PHYS				UL(0x01c00000)
 #define IO_OFFSET			0xfd000000 /* Virtual IO = 0xfec00000 */
 #define IO_SIZE				0x00400000
 #define IO_VIRT				(IO_PHYS + IO_OFFSET)
diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h
index 8bc3fc256171..405318e35bf6 100644
--- a/arch/arm/mach-davinci/include/mach/psc.h
+++ b/arch/arm/mach-davinci/include/mach/psc.h
@@ -246,7 +246,7 @@
 #define MDSTAT_STATE_MASK	0x3f
 #define PDSTAT_STATE_MASK	0x1f
 #define MDCTL_FORCE		BIT(31)
-#define PDCTL_NEXT		BIT(1)
+#define PDCTL_NEXT		BIT(0)
 #define PDCTL_EPCGOOD		BIT(8)
 
 #ifndef __ASSEMBLER__
diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h
index e347d88fef91..46b3cd11c3c2 100644
--- a/arch/arm/mach-davinci/include/mach/serial.h
+++ b/arch/arm/mach-davinci/include/mach/serial.h
@@ -15,16 +15,6 @@
 
 #include <mach/hardware.h>
 
-/*
- * Stolen area that contains debug uart physical and virtual addresses.  These
- * addresses are filled in by the uncompress.h code, and are used by the debug
- * macros in debug-macro.S.
- *
- * This area sits just below the page tables (see arch/arm/kernel/head.S).
- * We define it as a relative offset from start of usable RAM.
- */
-#define DAVINCI_UART_INFO_OFS	0x3ff8
-
 #define DAVINCI_UART0_BASE	(IO_PHYS + 0x20000)
 #define DAVINCI_UART1_BASE	(IO_PHYS + 0x20400)
 #define DAVINCI_UART2_BASE	(IO_PHYS + 0x20800)
diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h
index da2fb2c2155a..18cfd4977155 100644
--- a/arch/arm/mach-davinci/include/mach/uncompress.h
+++ b/arch/arm/mach-davinci/include/mach/uncompress.h
@@ -43,37 +43,27 @@ static inline void flush(void)
 		barrier();
 }
 
-static inline void set_uart_info(u32 phys, void * __iomem virt)
+static inline void set_uart_info(u32 phys)
 {
-	/*
-	 * Get address of some.bss variable and round it down
-	 * a la CONFIG_AUTO_ZRELADDR.
-	 */
-	u32 ram_start = (u32)&uart & 0xf8000000;
-	u32 *uart_info = (u32 *)(ram_start + DAVINCI_UART_INFO_OFS);
-
 	uart = (u32 *)phys;
-	uart_info[0] = phys;
-	uart_info[1] = (u32)virt;
 }
 
-#define _DEBUG_LL_ENTRY(machine, phys, virt)			\
-	if (machine_is_##machine()) {				\
-		set_uart_info(phys, virt);			\
-		break;						\
+#define _DEBUG_LL_ENTRY(machine, phys)				\
+	{							\
+		if (machine_is_##machine()) {			\
+			set_uart_info(phys);			\
+			break;					\
+		}						\
 	}
 
 #define DEBUG_LL_DAVINCI(machine, port)				\
-	_DEBUG_LL_ENTRY(machine, DAVINCI_UART##port##_BASE,	\
-			IO_ADDRESS(DAVINCI_UART##port##_BASE))
+	_DEBUG_LL_ENTRY(machine, DAVINCI_UART##port##_BASE)
 
 #define DEBUG_LL_DA8XX(machine, port)				\
-	_DEBUG_LL_ENTRY(machine, DA8XX_UART##port##_BASE,	\
-			IO_ADDRESS(DA8XX_UART##port##_BASE))
+	_DEBUG_LL_ENTRY(machine, DA8XX_UART##port##_BASE)
 
 #define DEBUG_LL_TNETV107X(machine, port)			\
-	_DEBUG_LL_ENTRY(machine, TNETV107X_UART##port##_BASE,	\
-			TNETV107X_UART##port##_VIRT)
+	_DEBUG_LL_ENTRY(machine, TNETV107X_UART##port##_BASE)
 
 static inline void __arch_decomp_setup(unsigned long arch_id)
 {
diff --git a/arch/arm/mach-davinci/pm.c b/arch/arm/mach-davinci/pm.c
index 04c49f7543ef..eb8360b33aa9 100644
--- a/arch/arm/mach-davinci/pm.c
+++ b/arch/arm/mach-davinci/pm.c
@@ -152,8 +152,7 @@ static struct platform_driver davinci_pm_driver = {
 	.remove = __exit_p(davinci_pm_remove),
 };
 
-static int __init davinci_pm_init(void)
+int __init davinci_pm_init(void)
 {
 	return platform_driver_probe(&davinci_pm_driver, davinci_pm_probe);
 }
-late_initcall(davinci_pm_init);
diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
index bda7aca04ca0..9493076fc594 100644
--- a/arch/arm/mach-dove/common.c
+++ b/arch/arm/mach-dove/common.c
@@ -13,7 +13,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/pci.h>
-#include <linux/clk.h>
+#include <linux/clk-provider.h>
 #include <linux/ata_platform.h>
 #include <linux/gpio.h>
 #include <asm/page.h>
@@ -68,6 +68,19 @@ void __init dove_map_io(void)
 }
 
 /*****************************************************************************
+ * CLK tree
+ ****************************************************************************/
+static struct clk *tclk;
+
+static void __init clk_init(void)
+{
+	tclk = clk_register_fixed_rate(NULL, "tclk", NULL, CLK_IS_ROOT,
+				       get_tclk());
+
+	orion_clkdev_init(tclk);
+}
+
+/*****************************************************************************
  * EHCI0
  ****************************************************************************/
 void __init dove_ehci0_init(void)
@@ -89,8 +102,7 @@ void __init dove_ehci1_init(void)
 void __init dove_ge00_init(struct mv643xx_eth_platform_data *eth_data)
 {
 	orion_ge00_init(eth_data,
-			DOVE_GE00_PHYS_BASE, IRQ_DOVE_GE00_SUM,
-			0, get_tclk());
+			DOVE_GE00_PHYS_BASE, IRQ_DOVE_GE00_SUM, 0);
 }
 
 /*****************************************************************************
@@ -116,7 +128,7 @@ void __init dove_sata_init(struct mv_sata_platform_data *sata_data)
 void __init dove_uart0_init(void)
 {
 	orion_uart0_init(DOVE_UART0_VIRT_BASE, DOVE_UART0_PHYS_BASE,
-			 IRQ_DOVE_UART_0, get_tclk());
+			 IRQ_DOVE_UART_0, tclk);
 }
 
 /*****************************************************************************
@@ -125,7 +137,7 @@ void __init dove_uart0_init(void)
 void __init dove_uart1_init(void)
 {
 	orion_uart1_init(DOVE_UART1_VIRT_BASE, DOVE_UART1_PHYS_BASE,
-			 IRQ_DOVE_UART_1, get_tclk());
+			 IRQ_DOVE_UART_1, tclk);
 }
 
 /*****************************************************************************
@@ -134,7 +146,7 @@ void __init dove_uart1_init(void)
 void __init dove_uart2_init(void)
 {
 	orion_uart2_init(DOVE_UART2_VIRT_BASE, DOVE_UART2_PHYS_BASE,
-			 IRQ_DOVE_UART_2, get_tclk());
+			 IRQ_DOVE_UART_2, tclk);
 }
 
 /*****************************************************************************
@@ -143,7 +155,7 @@ void __init dove_uart2_init(void)
 void __init dove_uart3_init(void)
 {
 	orion_uart3_init(DOVE_UART3_VIRT_BASE, DOVE_UART3_PHYS_BASE,
-			 IRQ_DOVE_UART_3, get_tclk());
+			 IRQ_DOVE_UART_3, tclk);
 }
 
 /*****************************************************************************
@@ -151,12 +163,12 @@ void __init dove_uart3_init(void)
  ****************************************************************************/
 void __init dove_spi0_init(void)
 {
-	orion_spi_init(DOVE_SPI0_PHYS_BASE, get_tclk());
+	orion_spi_init(DOVE_SPI0_PHYS_BASE);
 }
 
 void __init dove_spi1_init(void)
 {
-	orion_spi_1_init(DOVE_SPI1_PHYS_BASE, get_tclk());
+	orion_spi_1_init(DOVE_SPI1_PHYS_BASE);
 }
 
 /*****************************************************************************
@@ -181,7 +193,7 @@ static int get_tclk(void)
 	return 166666667;
 }
 
-static void dove_timer_init(void)
+static void __init dove_timer_init(void)
 {
 	orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR,
 			IRQ_DOVE_BRIDGE, get_tclk());
@@ -272,18 +284,17 @@ void __init dove_sdio1_init(void)
 
 void __init dove_init(void)
 {
-	int tclk;
-
-	tclk = get_tclk();
-
 	printk(KERN_INFO "Dove 88AP510 SoC, ");
-	printk(KERN_INFO "TCLK = %dMHz\n", (tclk + 499999) / 1000000);
+	printk(KERN_INFO "TCLK = %dMHz\n", (get_tclk() + 499999) / 1000000);
 
 #ifdef CONFIG_CACHE_TAUROS2
 	tauros2_init();
 #endif
 	dove_setup_cpu_mbus();
 
+	/* Setup root of clk tree */
+	clk_init();
+
 	/* internal devices that every board has */
 	dove_rtc_init();
 	dove_xor0_init();
diff --git a/arch/arm/mach-dove/dove-db-setup.c b/arch/arm/mach-dove/dove-db-setup.c
index ea77ae430b2d..bc2867f11346 100644
--- a/arch/arm/mach-dove/dove-db-setup.c
+++ b/arch/arm/mach-dove/dove-db-setup.c
@@ -20,7 +20,6 @@
 #include <linux/i2c.h>
 #include <linux/pci.h>
 #include <linux/spi/spi.h>
-#include <linux/spi/orion_spi.h>
 #include <linux/spi/flash.h>
 #include <linux/gpio.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-dove/mpp.c b/arch/arm/mach-dove/mpp.c
index 51e0e411c9cb..7f70afc26f91 100644
--- a/arch/arm/mach-dove/mpp.c
+++ b/arch/arm/mach-dove/mpp.c
@@ -56,7 +56,7 @@ static void dove_mpp_gpio_mode(int start, int end, int gpio_mode)
 
 /* Dump all the extra MPP registers. The platform code will dump the
    registers for pins 0-23. */
-static void dove_mpp_dump_regs(void)
+static void __init dove_mpp_dump_regs(void)
 {
 	pr_debug("PMU_CTRL4_CTRL: %08x\n",
 		 readl(DOVE_MPP_CTRL4_VIRT_BASE));
@@ -67,7 +67,7 @@ static void dove_mpp_dump_regs(void)
 	pr_debug("MPP_GENERAL: %08x\n", readl(DOVE_MPP_GENERAL_VIRT_BASE));
 }
 
-static void dove_mpp_cfg_nfc(int sel)
+static void __init dove_mpp_cfg_nfc(int sel)
 {
 	u32 mpp_gen_cfg = readl(DOVE_MPP_GENERAL_VIRT_BASE);
 
@@ -78,7 +78,7 @@ static void dove_mpp_cfg_nfc(int sel)
 	dove_mpp_gpio_mode(64, 71, GPIO_OUTPUT_OK);
 }
 
-static void dove_mpp_cfg_au1(int sel)
+static void __init dove_mpp_cfg_au1(int sel)
 {
 	u32 mpp_ctrl4 = readl(DOVE_MPP_CTRL4_VIRT_BASE);
 	u32 ssp_ctrl1 = readl(DOVE_SSP_CTRL_STATUS_1);
@@ -118,7 +118,7 @@ static void dove_mpp_cfg_au1(int sel)
 
 /* Configure the group registers, enabling GPIO if sel indicates the
    pin is to be used for GPIO */
-static void dove_mpp_conf_grp(unsigned int *mpp_grp_list)
+static void __init dove_mpp_conf_grp(unsigned int *mpp_grp_list)
 {
 	u32 mpp_ctrl4 = readl(DOVE_MPP_CTRL4_VIRT_BASE);
 	int gpio_mode;
diff --git a/arch/arm/mach-dove/pcie.c b/arch/arm/mach-dove/pcie.c
index 48a032005ea3..47921b0cdc65 100644
--- a/arch/arm/mach-dove/pcie.c
+++ b/arch/arm/mach-dove/pcie.c
@@ -43,6 +43,7 @@ static int __init dove_pcie_setup(int nr, struct pci_sys_data *sys)
 		return 0;
 
 	pp = &pcie_port[nr];
+	sys->private_data = pp;
 	pp->root_bus_nr = sys->busnr;
 
 	/*
@@ -93,19 +94,6 @@ static int __init dove_pcie_setup(int nr, struct pci_sys_data *sys)
 	return 1;
 }
 
-static struct pcie_port *bus_to_port(int bus)
-{
-	int i;
-
-	for (i = num_pcie_ports - 1; i >= 0; i--) {
-		int rbus = pcie_port[i].root_bus_nr;
-		if (rbus != -1 && rbus <= bus)
-			break;
-	}
-
-	return i >= 0 ? pcie_port + i : NULL;
-}
-
 static int pcie_valid_config(struct pcie_port *pp, int bus, int dev)
 {
 	/*
@@ -121,7 +109,8 @@ static int pcie_valid_config(struct pcie_port *pp, int bus, int dev)
 static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
 			int size, u32 *val)
 {
-	struct pcie_port *pp = bus_to_port(bus->number);
+	struct pci_sys_data *sys = bus->sysdata;
+	struct pcie_port *pp = sys->private_data;
 	unsigned long flags;
 	int ret;
 
@@ -140,7 +129,8 @@ static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
 static int pcie_wr_conf(struct pci_bus *bus, u32 devfn,
 			int where, int size, u32 val)
 {
-	struct pcie_port *pp = bus_to_port(bus->number);
+	struct pci_sys_data *sys = bus->sysdata;
+	struct pcie_port *pp = sys->private_data;
 	unsigned long flags;
 	int ret;
 
@@ -194,14 +184,14 @@ dove_pcie_scan_bus(int nr, struct pci_sys_data *sys)
 
 static int __init dove_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
-	struct pcie_port *pp = bus_to_port(dev->bus->number);
+	struct pci_sys_data *sys = dev->sysdata;
+	struct pcie_port *pp = sys->private_data;
 
 	return pp->index ? IRQ_DOVE_PCIE1 : IRQ_DOVE_PCIE0;
 }
 
 static struct hw_pci dove_pci __initdata = {
 	.nr_controllers	= 2,
-	.swizzle	= pci_std_swizzle,
 	.setup		= dove_pcie_setup,
 	.scan		= dove_pcie_scan_bus,
 	.map_irq	= dove_pcie_map_irq,
diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
index 97a249395b5a..fe3c1fa5462b 100644
--- a/arch/arm/mach-ep93xx/Kconfig
+++ b/arch/arm/mach-ep93xx/Kconfig
@@ -2,6 +2,11 @@ if ARCH_EP93XX
 
 menu "Cirrus EP93xx Implementation Options"
 
+config EP93XX_SOC_COMMON
+	bool
+	default y
+	select LEDS_GPIO_REGISTER
+
 config CRUNCH
 	bool "Support for MaverickCrunch"
 	help
diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c
index 2d45947a3034..a472777e9eba 100644
--- a/arch/arm/mach-ep93xx/adssphere.c
+++ b/arch/arm/mach-ep93xx/adssphere.c
@@ -41,5 +41,6 @@ MACHINE_START(ADSSPHERE, "ADS Sphere board")
 	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= adssphere_init_machine,
+	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 8d2589588713..4dd07a0e3604 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -241,11 +241,7 @@ unsigned int ep93xx_chip_revision(void)
  * EP93xx GPIO
  *************************************************************************/
 static struct resource ep93xx_gpio_resource[] = {
-	{
-		.start		= EP93XX_GPIO_PHYS_BASE,
-		.end		= EP93XX_GPIO_PHYS_BASE + 0xcc - 1,
-		.flags		= IORESOURCE_MEM,
-	},
+	DEFINE_RES_MEM(EP93XX_GPIO_PHYS_BASE, 0xcc),
 };
 
 static struct platform_device ep93xx_gpio_device = {
@@ -288,11 +284,7 @@ static AMBA_APB_DEVICE(uart3, "apb:uart3", 0x00041010, EP93XX_UART3_PHYS_BASE,
 	{ IRQ_EP93XX_UART3 }, &ep93xx_uart_data);
 
 static struct resource ep93xx_rtc_resource[] = {
-	{
-		.start		= EP93XX_RTC_PHYS_BASE,
-		.end		= EP93XX_RTC_PHYS_BASE + 0x10c - 1,
-		.flags		= IORESOURCE_MEM,
-	},
+	DEFINE_RES_MEM(EP93XX_RTC_PHYS_BASE, 0x10c),
 };
 
 static struct platform_device ep93xx_rtc_device = {
@@ -304,16 +296,8 @@ static struct platform_device ep93xx_rtc_device = {
 
 
 static struct resource ep93xx_ohci_resources[] = {
-	[0] = {
-		.start	= EP93XX_USB_PHYS_BASE,
-		.end	= EP93XX_USB_PHYS_BASE + 0x0fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_EP93XX_USB,
-		.end	= IRQ_EP93XX_USB,
-		.flags	= IORESOURCE_IRQ,
-	},
+	DEFINE_RES_MEM(EP93XX_USB_PHYS_BASE, 0x1000),
+	DEFINE_RES_IRQ(IRQ_EP93XX_USB),
 };
 
 
@@ -372,15 +356,8 @@ void __init ep93xx_register_flash(unsigned int width,
 static struct ep93xx_eth_data ep93xx_eth_data;
 
 static struct resource ep93xx_eth_resource[] = {
-	{
-		.start	= EP93XX_ETHERNET_PHYS_BASE,
-		.end	= EP93XX_ETHERNET_PHYS_BASE + 0xffff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_EP93XX_ETHERNET,
-		.end	= IRQ_EP93XX_ETHERNET,
-		.flags	= IORESOURCE_IRQ,
-	}
+	DEFINE_RES_MEM(EP93XX_ETHERNET_PHYS_BASE, 0x10000),
+	DEFINE_RES_IRQ(IRQ_EP93XX_ETHERNET),
 };
 
 static u64 ep93xx_eth_dma_mask = DMA_BIT_MASK(32);
@@ -461,16 +438,8 @@ void __init ep93xx_register_i2c(struct i2c_gpio_platform_data *data,
 static struct ep93xx_spi_info ep93xx_spi_master_data;
 
 static struct resource ep93xx_spi_resources[] = {
-	{
-		.start	= EP93XX_SPI_PHYS_BASE,
-		.end	= EP93XX_SPI_PHYS_BASE + 0x18 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= IRQ_EP93XX_SSP,
-		.end	= IRQ_EP93XX_SSP,
-		.flags	= IORESOURCE_IRQ,
-	},
+	DEFINE_RES_MEM(EP93XX_SPI_PHYS_BASE, 0x18),
+	DEFINE_RES_IRQ(IRQ_EP93XX_SSP),
 };
 
 static u64 ep93xx_spi_dma_mask = DMA_BIT_MASK(32);
@@ -513,7 +482,7 @@ void __init ep93xx_register_spi(struct ep93xx_spi_info *info,
 /*************************************************************************
  * EP93xx LEDs
  *************************************************************************/
-static struct gpio_led ep93xx_led_pins[] = {
+static const struct gpio_led ep93xx_led_pins[] __initconst = {
 	{
 		.name	= "platform:grled",
 		.gpio	= EP93XX_GPIO_LINE_GRLED,
@@ -523,29 +492,16 @@ static struct gpio_led ep93xx_led_pins[] = {
 	},
 };
 
-static struct gpio_led_platform_data ep93xx_led_data = {
+static const struct gpio_led_platform_data ep93xx_led_data __initconst = {
 	.num_leds	= ARRAY_SIZE(ep93xx_led_pins),
 	.leds		= ep93xx_led_pins,
 };
 
-static struct platform_device ep93xx_leds = {
-	.name		= "leds-gpio",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &ep93xx_led_data,
-	},
-};
-
-
 /*************************************************************************
  * EP93xx pwm peripheral handling
  *************************************************************************/
 static struct resource ep93xx_pwm0_resource[] = {
-	{
-		.start	= EP93XX_PWM_PHYS_BASE,
-		.end	= EP93XX_PWM_PHYS_BASE + 0x10 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
+	DEFINE_RES_MEM(EP93XX_PWM_PHYS_BASE, 0x10),
 };
 
 static struct platform_device ep93xx_pwm0_device = {
@@ -556,11 +512,7 @@ static struct platform_device ep93xx_pwm0_device = {
 };
 
 static struct resource ep93xx_pwm1_resource[] = {
-	{
-		.start	= EP93XX_PWM_PHYS_BASE + 0x20,
-		.end	= EP93XX_PWM_PHYS_BASE + 0x30 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
+	DEFINE_RES_MEM(EP93XX_PWM_PHYS_BASE + 0x20, 0x10),
 };
 
 static struct platform_device ep93xx_pwm1_device = {
@@ -628,11 +580,7 @@ EXPORT_SYMBOL(ep93xx_pwm_release_gpio);
 static struct ep93xxfb_mach_info ep93xxfb_data;
 
 static struct resource ep93xx_fb_resource[] = {
-	{
-		.start		= EP93XX_RASTER_PHYS_BASE,
-		.end		= EP93XX_RASTER_PHYS_BASE + 0x800 - 1,
-		.flags		= IORESOURCE_MEM,
-	},
+	DEFINE_RES_MEM(EP93XX_RASTER_PHYS_BASE, 0x800),
 };
 
 static struct platform_device ep93xx_fb_device = {
@@ -680,15 +628,8 @@ void __init ep93xx_register_fb(struct ep93xxfb_mach_info *data)
 static struct ep93xx_keypad_platform_data ep93xx_keypad_data;
 
 static struct resource ep93xx_keypad_resource[] = {
-	{
-		.start	= EP93XX_KEY_MATRIX_PHYS_BASE,
-		.end	= EP93XX_KEY_MATRIX_PHYS_BASE + 0x0c - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_EP93XX_KEY,
-		.end	= IRQ_EP93XX_KEY,
-		.flags	= IORESOURCE_IRQ,
-	},
+	DEFINE_RES_MEM(EP93XX_KEY_MATRIX_PHYS_BASE, 0x0c),
+	DEFINE_RES_IRQ(IRQ_EP93XX_KEY),
 };
 
 static struct platform_device ep93xx_keypad_device = {
@@ -734,7 +675,7 @@ int ep93xx_keypad_acquire_gpio(struct platform_device *pdev)
 fail_gpio_d:
 	gpio_free(EP93XX_GPIO_LINE_C(i));
 fail_gpio_c:
-	for ( ; i >= 0; --i) {
+	for (--i; i >= 0; --i) {
 		gpio_free(EP93XX_GPIO_LINE_C(i));
 		gpio_free(EP93XX_GPIO_LINE_D(i));
 	}
@@ -761,11 +702,7 @@ EXPORT_SYMBOL(ep93xx_keypad_release_gpio);
  * EP93xx I2S audio peripheral handling
  *************************************************************************/
 static struct resource ep93xx_i2s_resource[] = {
-	{
-		.start	= EP93XX_I2S_PHYS_BASE,
-		.end	= EP93XX_I2S_PHYS_BASE + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
+	DEFINE_RES_MEM(EP93XX_I2S_PHYS_BASE, 0x100),
 };
 
 static struct platform_device ep93xx_i2s_device = {
@@ -824,16 +761,8 @@ EXPORT_SYMBOL(ep93xx_i2s_release);
  * EP93xx AC97 audio peripheral handling
  *************************************************************************/
 static struct resource ep93xx_ac97_resources[] = {
-	{
-		.start	= EP93XX_AAC_PHYS_BASE,
-		.end	= EP93XX_AAC_PHYS_BASE + 0xac - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= IRQ_EP93XX_AACINTR,
-		.end	= IRQ_EP93XX_AACINTR,
-		.flags	= IORESOURCE_IRQ,
-	},
+	DEFINE_RES_MEM(EP93XX_AAC_PHYS_BASE, 0xac),
+	DEFINE_RES_IRQ(IRQ_EP93XX_AACINTR),
 };
 
 static struct platform_device ep93xx_ac97_device = {
@@ -889,8 +818,9 @@ void __init ep93xx_init_devices(void)
 
 	platform_device_register(&ep93xx_rtc_device);
 	platform_device_register(&ep93xx_ohci_device);
-	platform_device_register(&ep93xx_leds);
 	platform_device_register(&ep93xx_wdt_device);
+
+	gpio_led_register_device(-1, &ep93xx_led_data);
 }
 
 void ep93xx_restart(char mode, const char *cmd)
@@ -904,3 +834,8 @@ void ep93xx_restart(char mode, const char *cmd)
 	while (1)
 		;
 }
+
+void __init ep93xx_init_late(void)
+{
+	crunch_init();
+}
diff --git a/arch/arm/mach-ep93xx/crunch.c b/arch/arm/mach-ep93xx/crunch.c
index 74753e2df603..a4a2ab9648c9 100644
--- a/arch/arm/mach-ep93xx/crunch.c
+++ b/arch/arm/mach-ep93xx/crunch.c
@@ -79,12 +79,10 @@ static struct notifier_block crunch_notifier_block = {
 	.notifier_call	= crunch_do,
 };
 
-static int __init crunch_init(void)
+int __init crunch_init(void)
 {
 	thread_register_notifier(&crunch_notifier_block);
 	elf_hwcap |= HWCAP_CRUNCH;
 
 	return 0;
 }
-
-late_initcall(crunch_init);
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index da9047d726f0..d74c5cddb98b 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -255,6 +255,7 @@ MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board")
 	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= edb93xx_init_machine,
+	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
 MACHINE_END
 #endif
@@ -268,6 +269,7 @@ MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
 	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= edb93xx_init_machine,
+	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
 MACHINE_END
 #endif
@@ -281,6 +283,7 @@ MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board")
 	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= edb93xx_init_machine,
+	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
 MACHINE_END
 #endif
@@ -294,6 +297,7 @@ MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board")
 	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= edb93xx_init_machine,
+	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
 MACHINE_END
 #endif
@@ -307,6 +311,7 @@ MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
 	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= edb93xx_init_machine,
+	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
 MACHINE_END
 #endif
@@ -320,6 +325,7 @@ MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board")
 	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= edb93xx_init_machine,
+	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
 MACHINE_END
 #endif
@@ -333,6 +339,7 @@ MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board")
 	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= edb93xx_init_machine,
+	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
 MACHINE_END
 #endif
@@ -346,6 +353,7 @@ MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
 	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= edb93xx_init_machine,
+	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c
index fcdffbe49dcc..437c34111155 100644
--- a/arch/arm/mach-ep93xx/gesbc9312.c
+++ b/arch/arm/mach-ep93xx/gesbc9312.c
@@ -41,5 +41,6 @@ MACHINE_START(GESBC9312, "Glomation GESBC-9312-sx")
 	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= gesbc9312_init_machine,
+	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h
index 602bd87fd0ab..1ecb040d98bf 100644
--- a/arch/arm/mach-ep93xx/include/mach/platform.h
+++ b/arch/arm/mach-ep93xx/include/mach/platform.h
@@ -53,5 +53,12 @@ void ep93xx_init_devices(void);
 extern struct sys_timer ep93xx_timer;
 
 void ep93xx_restart(char, const char *);
+void ep93xx_init_late(void);
+
+#ifdef CONFIG_CRUNCH
+int crunch_init(void);
+#else
+static inline int crunch_init(void) { return 0; }
+#endif
 
 #endif
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index dc431c5f04ce..3d7cdab725b2 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -85,6 +85,7 @@ MACHINE_START(MICRO9, "Contec Micro9-High")
 	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= micro9_init_machine,
+	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
 MACHINE_END
 #endif
@@ -98,6 +99,7 @@ MACHINE_START(MICRO9M, "Contec Micro9-Mid")
 	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= micro9_init_machine,
+	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
 MACHINE_END
 #endif
@@ -111,6 +113,7 @@ MACHINE_START(MICRO9L, "Contec Micro9-Lite")
 	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= micro9_init_machine,
+	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
 MACHINE_END
 #endif
@@ -124,6 +127,7 @@ MACHINE_START(MICRO9S, "Contec Micro9-Slim")
 	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= micro9_init_machine,
+	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c
index f40c2987e545..33dc07917417 100644
--- a/arch/arm/mach-ep93xx/simone.c
+++ b/arch/arm/mach-ep93xx/simone.c
@@ -86,5 +86,6 @@ MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board")
 	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= simone_init_machine,
+	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c
index 0c00852ef160..eb282378fa78 100644
--- a/arch/arm/mach-ep93xx/snappercl15.c
+++ b/arch/arm/mach-ep93xx/snappercl15.c
@@ -183,5 +183,6 @@ MACHINE_START(SNAPPER_CL15, "Bluewater Systems Snapper CL15")
 	.handle_irq	= vic_handle_irq,
 	.timer 		= &ep93xx_timer,
 	.init_machine	= snappercl15_init_machine,
+	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index 5ea790942e94..d4ef339d961e 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -252,5 +252,6 @@ MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC")
 	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= ts72xx_init_machine,
+	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c
index ba156eb225e8..2905a4929bdc 100644
--- a/arch/arm/mach-ep93xx/vision_ep9307.c
+++ b/arch/arm/mach-ep93xx/vision_ep9307.c
@@ -367,5 +367,6 @@ MACHINE_START(VISION_EP9307, "Vision Engraving Systems EP9307")
 	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= vision_init_machine,
+	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 0491ceef1cda..573be57d3d28 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -61,6 +61,9 @@ config SOC_EXYNOS5250
 	bool "SAMSUNG EXYNOS5250"
 	default y
 	depends on ARCH_EXYNOS5
+	select SAMSUNG_DMADEV
+	select S5P_PM if PM
+	select S5P_SLEEP if PM
 	help
 	  Enable EXYNOS5250 SoC support
 
@@ -70,7 +73,7 @@ config EXYNOS4_MCT
 	help
 	  Use MCT (Multi Core Timer) as kernel timers
 
-config EXYNOS4_DEV_DMA
+config EXYNOS_DEV_DMA
 	bool
 	help
 	  Compile in amba device definitions for DMA controller
@@ -80,15 +83,20 @@ config EXYNOS4_DEV_AHCI
 	help
 	  Compile in platform device definitions for AHCI
 
+config EXYNOS_DEV_DRM
+	bool
+	help
+	  Compile in platform device definitions for core DRM device
+
 config EXYNOS4_SETUP_FIMD0
 	bool
 	help
 	  Common setup code for FIMD0.
 
-config EXYNOS4_DEV_SYSMMU
+config EXYNOS_DEV_SYSMMU
 	bool
 	help
-	  Common setup code for SYSTEM MMU in EXYNOS4
+	  Common setup code for SYSTEM MMU in EXYNOS platforms
 
 config EXYNOS4_DEV_DWMCI
 	bool
@@ -161,7 +169,7 @@ config EXYNOS4_SETUP_USB_PHY
 	help
 	  Common setup code for USB PHY controller
 
-config EXYNOS4_SETUP_SPI
+config EXYNOS_SETUP_SPI
 	bool
 	help
 	  Common setup code for SPI GPIO configurations.
@@ -200,12 +208,13 @@ config MACH_SMDKV310
 	select S3C_DEV_HSMMC2
 	select S3C_DEV_HSMMC3
 	select SAMSUNG_DEV_BACKLIGHT
+	select EXYNOS_DEV_DRM
+	select EXYNOS_DEV_SYSMMU
 	select EXYNOS4_DEV_AHCI
 	select SAMSUNG_DEV_KEYPAD
 	select EXYNOS4_DEV_DMA
 	select SAMSUNG_DEV_PWM
 	select EXYNOS4_DEV_USB_OHCI
-	select EXYNOS4_DEV_SYSMMU
 	select EXYNOS4_SETUP_FIMD0
 	select EXYNOS4_SETUP_I2C1
 	select EXYNOS4_SETUP_KEYPAD
@@ -223,8 +232,7 @@ config MACH_ARMLEX4210
 	select S3C_DEV_HSMMC2
 	select S3C_DEV_HSMMC3
 	select EXYNOS4_DEV_AHCI
-	select EXYNOS4_DEV_DMA
-	select EXYNOS4_DEV_SYSMMU
+	select EXYNOS_DEV_DMA
 	select EXYNOS4_SETUP_SDHCI
 	help
 	  Machine support for Samsung ARMLEX4210 based on EXYNOS4210
@@ -232,6 +240,9 @@ config MACH_ARMLEX4210
 config MACH_UNIVERSAL_C210
 	bool "Mobile UNIVERSAL_C210 Board"
 	select CPU_EXYNOS4210
+	select S5P_HRT
+	select CLKSRC_MMIO
+	select HAVE_SCHED_CLOCK
 	select S5P_GPIO_INT
 	select S5P_DEV_FIMC0
 	select S5P_DEV_FIMC1
@@ -247,11 +258,14 @@ config MACH_UNIVERSAL_C210
 	select S3C_DEV_I2C1
 	select S3C_DEV_I2C3
 	select S3C_DEV_I2C5
+	select S3C_DEV_USB_HSOTG
 	select S5P_DEV_I2C_HDMIPHY
 	select S5P_DEV_MFC
 	select S5P_DEV_ONENAND
 	select S5P_DEV_TV
+	select EXYNOS_DEV_SYSMMU
 	select EXYNOS4_DEV_DMA
+	select EXYNOS_DEV_DRM
 	select EXYNOS4_SETUP_FIMD0
 	select EXYNOS4_SETUP_I2C1
 	select EXYNOS4_SETUP_I2C3
@@ -259,6 +273,7 @@ config MACH_UNIVERSAL_C210
 	select EXYNOS4_SETUP_SDHCI
 	select EXYNOS4_SETUP_FIMC
 	select S5P_SETUP_MIPIPHY
+	select EXYNOS4_SETUP_USB_PHY
 	help
 	  Machine support for Samsung Mobile Universal S5PC210 Reference
 	  Board.
@@ -277,6 +292,7 @@ config MACH_NURI
 	select S3C_DEV_I2C3
 	select S3C_DEV_I2C5
 	select S3C_DEV_I2C6
+	select S3C_DEV_USB_HSOTG
 	select S5P_DEV_CSIS0
 	select S5P_DEV_JPEG
 	select S5P_DEV_FIMC0
@@ -288,6 +304,7 @@ config MACH_NURI
 	select S5P_DEV_USB_EHCI
 	select S5P_SETUP_MIPIPHY
 	select EXYNOS4_DEV_DMA
+	select EXYNOS_DEV_DRM
 	select EXYNOS4_SETUP_FIMC
 	select EXYNOS4_SETUP_FIMD0
 	select EXYNOS4_SETUP_I2C1
@@ -322,6 +339,8 @@ config MACH_ORIGEN
 	select S5P_DEV_USB_EHCI
 	select SAMSUNG_DEV_BACKLIGHT
 	select SAMSUNG_DEV_PWM
+	select EXYNOS_DEV_DRM
+	select EXYNOS_DEV_SYSMMU
 	select EXYNOS4_DEV_DMA
 	select EXYNOS4_DEV_USB_OHCI
 	select EXYNOS4_SETUP_FIMD0
@@ -342,10 +361,16 @@ config MACH_SMDK4212
 	select S3C_DEV_I2C7
 	select S3C_DEV_RTC
 	select S3C_DEV_WDT
+	select S5P_DEV_FIMC0
+	select S5P_DEV_FIMC1
+	select S5P_DEV_FIMC2
+	select S5P_DEV_FIMC3
+	select S5P_DEV_MFC
 	select SAMSUNG_DEV_BACKLIGHT
 	select SAMSUNG_DEV_KEYPAD
 	select SAMSUNG_DEV_PWM
-	select EXYNOS4_DEV_DMA
+	select EXYNOS_DEV_SYSMMU
+	select EXYNOS_DEV_DMA
 	select EXYNOS4_SETUP_I2C1
 	select EXYNOS4_SETUP_I2C3
 	select EXYNOS4_SETUP_I2C7
@@ -368,6 +393,7 @@ comment "Flattened Device Tree based board for EXYNOS SoCs"
 
 config MACH_EXYNOS4_DT
 	bool "Samsung Exynos4 Machine using device tree"
+	depends on ARCH_EXYNOS4
 	select CPU_EXYNOS4210
 	select USE_OF
 	select ARM_AMBA
@@ -380,6 +406,7 @@ config MACH_EXYNOS4_DT
 
 config MACH_EXYNOS5_DT
 	bool "SAMSUNG EXYNOS5 Machine using device tree"
+	depends on ARCH_EXYNOS5
 	select SOC_EXYNOS5250
 	select USE_OF
 	select ARM_AMBA
diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
index 8631840d1b5e..9b58024f7d43 100644
--- a/arch/arm/mach-exynos/Makefile
+++ b/arch/arm/mach-exynos/Makefile
@@ -22,7 +22,7 @@ obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o
 obj-$(CONFIG_CPU_IDLE)		+= cpuidle.o
 
-obj-$(CONFIG_ARCH_EXYNOS4)	+= pmu.o
+obj-$(CONFIG_ARCH_EXYNOS)	+= pmu.o
 
 obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
 
@@ -50,10 +50,11 @@ obj-$(CONFIG_MACH_EXYNOS5_DT)		+= mach-exynos5-dt.o
 obj-y					+= dev-uart.o
 obj-$(CONFIG_ARCH_EXYNOS4)		+= dev-audio.o
 obj-$(CONFIG_EXYNOS4_DEV_AHCI)		+= dev-ahci.o
-obj-$(CONFIG_EXYNOS4_DEV_SYSMMU)	+= dev-sysmmu.o
 obj-$(CONFIG_EXYNOS4_DEV_DWMCI)		+= dev-dwmci.o
-obj-$(CONFIG_EXYNOS4_DEV_DMA)		+= dma.o
+obj-$(CONFIG_EXYNOS_DEV_DMA)		+= dma.o
 obj-$(CONFIG_EXYNOS4_DEV_USB_OHCI)	+= dev-ohci.o
+obj-$(CONFIG_EXYNOS_DEV_DRM)		+= dev-drm.o
+obj-$(CONFIG_EXYNOS_DEV_SYSMMU)		+= dev-sysmmu.o
 
 obj-$(CONFIG_ARCH_EXYNOS)		+= setup-i2c0.o
 obj-$(CONFIG_EXYNOS4_SETUP_FIMC)	+= setup-fimc.o
@@ -68,4 +69,4 @@ obj-$(CONFIG_EXYNOS4_SETUP_I2C7)	+= setup-i2c7.o
 obj-$(CONFIG_EXYNOS4_SETUP_KEYPAD)	+= setup-keypad.o
 obj-$(CONFIG_EXYNOS4_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
 obj-$(CONFIG_EXYNOS4_SETUP_USB_PHY)	+= setup-usb-phy.o
-obj-$(CONFIG_EXYNOS4_SETUP_SPI)		+= setup-spi.o
+obj-$(CONFIG_EXYNOS_SETUP_SPI)		+= setup-spi.o
diff --git a/arch/arm/mach-exynos/Makefile.boot b/arch/arm/mach-exynos/Makefile.boot
index b9862e22bf10..31bd181b0514 100644
--- a/arch/arm/mach-exynos/Makefile.boot
+++ b/arch/arm/mach-exynos/Makefile.boot
@@ -1,2 +1,5 @@
    zreladdr-y	+= 0x40008000
 params_phys-y	:= 0x40000100
+
+dtb-$(CONFIG_MACH_EXYNOS4_DT) += exynos4210-origen.dtb exynos4210-smdkv310.dtb
+dtb-$(CONFIG_MACH_EXYNOS5_DT) += exynos5250-smdk5250.dtb
diff --git a/arch/arm/mach-exynos/clock-exynos4.c b/arch/arm/mach-exynos/clock-exynos4.c
index df54c2a92225..bcb7db453145 100644
--- a/arch/arm/mach-exynos/clock-exynos4.c
+++ b/arch/arm/mach-exynos/clock-exynos4.c
@@ -168,7 +168,7 @@ static int exynos4_clk_ip_tv_ctrl(struct clk *clk, int enable)
 	return s5p_gatectrl(EXYNOS4_CLKGATE_IP_TV, clk, enable);
 }
 
-static int exynos4_clk_ip_image_ctrl(struct clk *clk, int enable)
+int exynos4_clk_ip_image_ctrl(struct clk *clk, int enable)
 {
 	return s5p_gatectrl(EXYNOS4_CLKGATE_IP_IMAGE, clk, enable);
 }
@@ -198,6 +198,11 @@ static int exynos4_clk_ip_perir_ctrl(struct clk *clk, int enable)
 	return s5p_gatectrl(EXYNOS4_CLKGATE_IP_PERIR, clk, enable);
 }
 
+int exynos4_clk_ip_dmc_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(EXYNOS4_CLKGATE_IP_DMC, clk, enable);
+}
+
 static int exynos4_clk_hdmiphy_ctrl(struct clk *clk, int enable)
 {
 	return s5p_gatectrl(S5P_HDMI_PHY_CONTROL, clk, enable);
@@ -497,25 +502,25 @@ static struct clk exynos4_init_clocks_off[] = {
 		.ctrlbit	= (1 << 3),
 	}, {
 		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.0",
+		.devname	= "exynos4-sdhci.0",
 		.parent		= &exynos4_clk_aclk_133.clk,
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 5),
 	}, {
 		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.1",
+		.devname	= "exynos4-sdhci.1",
 		.parent		= &exynos4_clk_aclk_133.clk,
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 6),
 	}, {
 		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.2",
+		.devname	= "exynos4-sdhci.2",
 		.parent		= &exynos4_clk_aclk_133.clk,
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 7),
 	}, {
 		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.3",
+		.devname	= "exynos4-sdhci.3",
 		.parent		= &exynos4_clk_aclk_133.clk,
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 8),
@@ -678,61 +683,55 @@ static struct clk exynos4_init_clocks_off[] = {
 		.enable		= exynos4_clk_ip_peril_ctrl,
 		.ctrlbit	= (1 << 14),
 	}, {
-		.name		= "SYSMMU_MDMA",
+		.name		= SYSMMU_CLOCK_NAME,
+		.devname	= SYSMMU_CLOCK_DEVNAME(mfc_l, 0),
+		.enable		= exynos4_clk_ip_mfc_ctrl,
+		.ctrlbit	= (1 << 1),
+	}, {
+		.name		= SYSMMU_CLOCK_NAME,
+		.devname	= SYSMMU_CLOCK_DEVNAME(mfc_r, 1),
+		.enable		= exynos4_clk_ip_mfc_ctrl,
+		.ctrlbit	= (1 << 2),
+	}, {
+		.name		= SYSMMU_CLOCK_NAME,
+		.devname	= SYSMMU_CLOCK_DEVNAME(tv, 2),
+		.enable		= exynos4_clk_ip_tv_ctrl,
+		.ctrlbit	= (1 << 4),
+	}, {
+		.name		= SYSMMU_CLOCK_NAME,
+		.devname	= SYSMMU_CLOCK_DEVNAME(jpeg, 3),
+		.enable		= exynos4_clk_ip_cam_ctrl,
+		.ctrlbit	= (1 << 11),
+	}, {
+		.name		= SYSMMU_CLOCK_NAME,
+		.devname	= SYSMMU_CLOCK_DEVNAME(rot, 4),
 		.enable		= exynos4_clk_ip_image_ctrl,
-		.ctrlbit	= (1 << 5),
+		.ctrlbit	= (1 << 4),
 	}, {
-		.name		= "SYSMMU_FIMC0",
+		.name		= SYSMMU_CLOCK_NAME,
+		.devname	= SYSMMU_CLOCK_DEVNAME(fimc0, 5),
 		.enable		= exynos4_clk_ip_cam_ctrl,
 		.ctrlbit	= (1 << 7),
 	}, {
-		.name		= "SYSMMU_FIMC1",
+		.name		= SYSMMU_CLOCK_NAME,
+		.devname	= SYSMMU_CLOCK_DEVNAME(fimc1, 6),
 		.enable		= exynos4_clk_ip_cam_ctrl,
 		.ctrlbit	= (1 << 8),
 	}, {
-		.name		= "SYSMMU_FIMC2",
+		.name		= SYSMMU_CLOCK_NAME,
+		.devname	= SYSMMU_CLOCK_DEVNAME(fimc2, 7),
 		.enable		= exynos4_clk_ip_cam_ctrl,
 		.ctrlbit	= (1 << 9),
 	}, {
-		.name		= "SYSMMU_FIMC3",
+		.name		= SYSMMU_CLOCK_NAME,
+		.devname	= SYSMMU_CLOCK_DEVNAME(fimc3, 8),
 		.enable		= exynos4_clk_ip_cam_ctrl,
 		.ctrlbit	= (1 << 10),
 	}, {
-		.name		= "SYSMMU_JPEG",
-		.enable		= exynos4_clk_ip_cam_ctrl,
-		.ctrlbit	= (1 << 11),
-	}, {
-		.name		= "SYSMMU_FIMD0",
+		.name		= SYSMMU_CLOCK_NAME,
+		.devname	= SYSMMU_CLOCK_DEVNAME(fimd0, 10),
 		.enable		= exynos4_clk_ip_lcd0_ctrl,
 		.ctrlbit	= (1 << 4),
-	}, {
-		.name		= "SYSMMU_FIMD1",
-		.enable		= exynos4_clk_ip_lcd1_ctrl,
-		.ctrlbit	= (1 << 4),
-	}, {
-		.name		= "SYSMMU_PCIe",
-		.enable		= exynos4_clk_ip_fsys_ctrl,
-		.ctrlbit	= (1 << 18),
-	}, {
-		.name		= "SYSMMU_G2D",
-		.enable		= exynos4_clk_ip_image_ctrl,
-		.ctrlbit	= (1 << 3),
-	}, {
-		.name		= "SYSMMU_ROTATOR",
-		.enable		= exynos4_clk_ip_image_ctrl,
-		.ctrlbit	= (1 << 4),
-	}, {
-		.name		= "SYSMMU_TV",
-		.enable		= exynos4_clk_ip_tv_ctrl,
-		.ctrlbit	= (1 << 4),
-	}, {
-		.name		= "SYSMMU_MFC_L",
-		.enable		= exynos4_clk_ip_mfc_ctrl,
-		.ctrlbit	= (1 << 1),
-	}, {
-		.name		= "SYSMMU_MFC_R",
-		.enable		= exynos4_clk_ip_mfc_ctrl,
-		.ctrlbit	= (1 << 2),
 	}
 };
 
@@ -1202,7 +1201,7 @@ static struct clksrc_clk exynos4_clk_sclk_uart3 = {
 static struct clksrc_clk exynos4_clk_sclk_mmc0 = {
 	.clk	= {
 		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.0",
+		.devname	= "exynos4-sdhci.0",
 		.parent		= &exynos4_clk_dout_mmc0.clk,
 		.enable		= exynos4_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 0),
@@ -1213,7 +1212,7 @@ static struct clksrc_clk exynos4_clk_sclk_mmc0 = {
 static struct clksrc_clk exynos4_clk_sclk_mmc1 = {
 	.clk	= {
 		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.1",
+		.devname	= "exynos4-sdhci.1",
 		.parent		= &exynos4_clk_dout_mmc1.clk,
 		.enable		= exynos4_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 4),
@@ -1224,7 +1223,7 @@ static struct clksrc_clk exynos4_clk_sclk_mmc1 = {
 static struct clksrc_clk exynos4_clk_sclk_mmc2 = {
 	.clk	= {
 		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.2",
+		.devname	= "exynos4-sdhci.2",
 		.parent		= &exynos4_clk_dout_mmc2.clk,
 		.enable		= exynos4_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 8),
@@ -1235,7 +1234,7 @@ static struct clksrc_clk exynos4_clk_sclk_mmc2 = {
 static struct clksrc_clk exynos4_clk_sclk_mmc3 = {
 	.clk	= {
 		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.3",
+		.devname	= "exynos4-sdhci.3",
 		.parent		= &exynos4_clk_dout_mmc3.clk,
 		.enable		= exynos4_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 12),
@@ -1340,10 +1339,10 @@ static struct clk_lookup exynos4_clk_lookup[] = {
 	CLKDEV_INIT("exynos4210-uart.1", "clk_uart_baud0", &exynos4_clk_sclk_uart1.clk),
 	CLKDEV_INIT("exynos4210-uart.2", "clk_uart_baud0", &exynos4_clk_sclk_uart2.clk),
 	CLKDEV_INIT("exynos4210-uart.3", "clk_uart_baud0", &exynos4_clk_sclk_uart3.clk),
-	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &exynos4_clk_sclk_mmc0.clk),
-	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &exynos4_clk_sclk_mmc1.clk),
-	CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &exynos4_clk_sclk_mmc2.clk),
-	CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.2", &exynos4_clk_sclk_mmc3.clk),
+	CLKDEV_INIT("exynos4-sdhci.0", "mmc_busclk.2", &exynos4_clk_sclk_mmc0.clk),
+	CLKDEV_INIT("exynos4-sdhci.1", "mmc_busclk.2", &exynos4_clk_sclk_mmc1.clk),
+	CLKDEV_INIT("exynos4-sdhci.2", "mmc_busclk.2", &exynos4_clk_sclk_mmc2.clk),
+	CLKDEV_INIT("exynos4-sdhci.3", "mmc_busclk.2", &exynos4_clk_sclk_mmc3.clk),
 	CLKDEV_INIT("exynos4-fb.0", "lcd", &exynos4_clk_fimd0),
 	CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos4_clk_pdma0),
 	CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos4_clk_pdma1),
diff --git a/arch/arm/mach-exynos/clock-exynos4.h b/arch/arm/mach-exynos/clock-exynos4.h
index cb71c29c14d1..28a119701182 100644
--- a/arch/arm/mach-exynos/clock-exynos4.h
+++ b/arch/arm/mach-exynos/clock-exynos4.h
@@ -26,5 +26,7 @@ extern struct clk *exynos4_clkset_group_list[];
 extern int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable);
 extern int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable);
 extern int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable);
+extern int exynos4_clk_ip_image_ctrl(struct clk *clk, int enable);
+extern int exynos4_clk_ip_dmc_ctrl(struct clk *clk, int enable);
 
 #endif /* __ASM_ARCH_CLOCK_H */
diff --git a/arch/arm/mach-exynos/clock-exynos4210.c b/arch/arm/mach-exynos/clock-exynos4210.c
index 3b131e4b6ef5..b8689ff60baf 100644
--- a/arch/arm/mach-exynos/clock-exynos4210.c
+++ b/arch/arm/mach-exynos/clock-exynos4210.c
@@ -26,6 +26,7 @@
 #include <mach/hardware.h>
 #include <mach/map.h>
 #include <mach/regs-clock.h>
+#include <mach/sysmmu.h>
 
 #include "common.h"
 #include "clock-exynos4.h"
@@ -94,6 +95,16 @@ static struct clk init_clocks_off[] = {
 		.devname	= "exynos4-fb.1",
 		.enable		= exynos4_clk_ip_lcd1_ctrl,
 		.ctrlbit	= (1 << 0),
+	}, {
+		.name		= SYSMMU_CLOCK_NAME,
+		.devname	= SYSMMU_CLOCK_DEVNAME(2d, 14),
+		.enable		= exynos4_clk_ip_image_ctrl,
+		.ctrlbit	= (1 << 3),
+	}, {
+		.name		= SYSMMU_CLOCK_NAME,
+		.devname	= SYSMMU_CLOCK_DEVNAME(fimd1, 11),
+		.enable		= exynos4_clk_ip_lcd1_ctrl,
+		.ctrlbit	= (1 << 4),
 	},
 };
 
diff --git a/arch/arm/mach-exynos/clock-exynos4212.c b/arch/arm/mach-exynos/clock-exynos4212.c
index 3ecc01e06f74..da397d21bbcf 100644
--- a/arch/arm/mach-exynos/clock-exynos4212.c
+++ b/arch/arm/mach-exynos/clock-exynos4212.c
@@ -26,6 +26,7 @@
 #include <mach/hardware.h>
 #include <mach/map.h>
 #include <mach/regs-clock.h>
+#include <mach/sysmmu.h>
 
 #include "common.h"
 #include "clock-exynos4.h"
@@ -39,6 +40,16 @@ static struct sleep_save exynos4212_clock_save[] = {
 };
 #endif
 
+static int exynos4212_clk_ip_isp0_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(EXYNOS4_CLKGATE_IP_ISP0, clk, enable);
+}
+
+static int exynos4212_clk_ip_isp1_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(EXYNOS4_CLKGATE_IP_ISP1, clk, enable);
+}
+
 static struct clk *clk_src_mpll_user_list[] = {
 	[0] = &clk_fin_mpll,
 	[1] = &exynos4_clk_mout_mpll.clk,
@@ -66,7 +77,32 @@ static struct clksrc_clk clksrcs[] = {
 };
 
 static struct clk init_clocks_off[] = {
-	/* nothing here yet */
+	{
+		.name		= SYSMMU_CLOCK_NAME,
+		.devname	= SYSMMU_CLOCK_DEVNAME(2d, 14),
+		.enable		= exynos4_clk_ip_dmc_ctrl,
+		.ctrlbit	= (1 << 24),
+	}, {
+		.name		= SYSMMU_CLOCK_NAME,
+		.devname	= SYSMMU_CLOCK_DEVNAME(isp, 9),
+		.enable		= exynos4212_clk_ip_isp0_ctrl,
+		.ctrlbit	= (7 << 8),
+	}, {
+		.name		= SYSMMU_CLOCK_NAME2,
+		.devname	= SYSMMU_CLOCK_DEVNAME(isp, 9),
+		.enable		= exynos4212_clk_ip_isp1_ctrl,
+		.ctrlbit	= (1 << 4),
+	}, {
+		.name		= "flite",
+		.devname	= "exynos-fimc-lite.0",
+		.enable		= exynos4212_clk_ip_isp0_ctrl,
+		.ctrlbit	= (1 << 4),
+	}, {
+		.name		= "flite",
+		.devname	= "exynos-fimc-lite.1",
+		.enable		= exynos4212_clk_ip_isp0_ctrl,
+		.ctrlbit	= (1 << 3),
+	}
 };
 
 #ifdef CONFIG_PM_SLEEP
diff --git a/arch/arm/mach-exynos/clock-exynos5.c b/arch/arm/mach-exynos/clock-exynos5.c
index d013982d0f8e..fefa336be2b4 100644
--- a/arch/arm/mach-exynos/clock-exynos5.c
+++ b/arch/arm/mach-exynos/clock-exynos5.c
@@ -30,7 +30,56 @@
 
 #ifdef CONFIG_PM_SLEEP
 static struct sleep_save exynos5_clock_save[] = {
-	/* will be implemented */
+	SAVE_ITEM(EXYNOS5_CLKSRC_MASK_TOP),
+	SAVE_ITEM(EXYNOS5_CLKSRC_MASK_GSCL),
+	SAVE_ITEM(EXYNOS5_CLKSRC_MASK_DISP1_0),
+	SAVE_ITEM(EXYNOS5_CLKSRC_MASK_FSYS),
+	SAVE_ITEM(EXYNOS5_CLKSRC_MASK_MAUDIO),
+	SAVE_ITEM(EXYNOS5_CLKSRC_MASK_PERIC0),
+	SAVE_ITEM(EXYNOS5_CLKSRC_MASK_PERIC1),
+	SAVE_ITEM(EXYNOS5_CLKGATE_IP_GSCL),
+	SAVE_ITEM(EXYNOS5_CLKGATE_IP_DISP1),
+	SAVE_ITEM(EXYNOS5_CLKGATE_IP_MFC),
+	SAVE_ITEM(EXYNOS5_CLKGATE_IP_G3D),
+	SAVE_ITEM(EXYNOS5_CLKGATE_IP_GEN),
+	SAVE_ITEM(EXYNOS5_CLKGATE_IP_FSYS),
+	SAVE_ITEM(EXYNOS5_CLKGATE_IP_PERIC),
+	SAVE_ITEM(EXYNOS5_CLKGATE_IP_PERIS),
+	SAVE_ITEM(EXYNOS5_CLKGATE_BLOCK),
+	SAVE_ITEM(EXYNOS5_CLKDIV_TOP0),
+	SAVE_ITEM(EXYNOS5_CLKDIV_TOP1),
+	SAVE_ITEM(EXYNOS5_CLKDIV_GSCL),
+	SAVE_ITEM(EXYNOS5_CLKDIV_DISP1_0),
+	SAVE_ITEM(EXYNOS5_CLKDIV_GEN),
+	SAVE_ITEM(EXYNOS5_CLKDIV_MAUDIO),
+	SAVE_ITEM(EXYNOS5_CLKDIV_FSYS0),
+	SAVE_ITEM(EXYNOS5_CLKDIV_FSYS1),
+	SAVE_ITEM(EXYNOS5_CLKDIV_FSYS2),
+	SAVE_ITEM(EXYNOS5_CLKDIV_FSYS3),
+	SAVE_ITEM(EXYNOS5_CLKDIV_PERIC0),
+	SAVE_ITEM(EXYNOS5_CLKDIV_PERIC1),
+	SAVE_ITEM(EXYNOS5_CLKDIV_PERIC2),
+	SAVE_ITEM(EXYNOS5_CLKDIV_PERIC3),
+	SAVE_ITEM(EXYNOS5_CLKDIV_PERIC4),
+	SAVE_ITEM(EXYNOS5_CLKDIV_PERIC5),
+	SAVE_ITEM(EXYNOS5_SCLK_DIV_ISP),
+	SAVE_ITEM(EXYNOS5_CLKSRC_TOP0),
+	SAVE_ITEM(EXYNOS5_CLKSRC_TOP1),
+	SAVE_ITEM(EXYNOS5_CLKSRC_TOP2),
+	SAVE_ITEM(EXYNOS5_CLKSRC_TOP3),
+	SAVE_ITEM(EXYNOS5_CLKSRC_GSCL),
+	SAVE_ITEM(EXYNOS5_CLKSRC_DISP1_0),
+	SAVE_ITEM(EXYNOS5_CLKSRC_MAUDIO),
+	SAVE_ITEM(EXYNOS5_CLKSRC_FSYS),
+	SAVE_ITEM(EXYNOS5_CLKSRC_PERIC0),
+	SAVE_ITEM(EXYNOS5_CLKSRC_PERIC1),
+	SAVE_ITEM(EXYNOS5_SCLK_SRC_ISP),
+	SAVE_ITEM(EXYNOS5_EPLL_CON0),
+	SAVE_ITEM(EXYNOS5_EPLL_CON1),
+	SAVE_ITEM(EXYNOS5_EPLL_CON2),
+	SAVE_ITEM(EXYNOS5_VPLL_CON0),
+	SAVE_ITEM(EXYNOS5_VPLL_CON1),
+	SAVE_ITEM(EXYNOS5_VPLL_CON2),
 };
 #endif
 
@@ -82,6 +131,11 @@ static int exynos5_clksrc_mask_peric0_ctrl(struct clk *clk, int enable)
 	return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_PERIC0, clk, enable);
 }
 
+static int exynos5_clk_ip_acp_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(EXYNOS5_CLKGATE_IP_ACP, clk, enable);
+}
+
 static int exynos5_clk_ip_core_ctrl(struct clk *clk, int enable)
 {
 	return s5p_gatectrl(EXYNOS5_CLKGATE_IP_CORE, clk, enable);
@@ -127,6 +181,21 @@ static int exynos5_clk_ip_peris_ctrl(struct clk *clk, int enable)
 	return s5p_gatectrl(EXYNOS5_CLKGATE_IP_PERIS, clk, enable);
 }
 
+static int exynos5_clk_ip_gscl_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(EXYNOS5_CLKGATE_IP_GSCL, clk, enable);
+}
+
+static int exynos5_clk_ip_isp0_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(EXYNOS5_CLKGATE_IP_ISP0, clk, enable);
+}
+
+static int exynos5_clk_ip_isp1_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(EXYNOS5_CLKGATE_IP_ISP1, clk, enable);
+}
+
 /* Core list of CMU_CPU side */
 
 static struct clksrc_clk exynos5_clk_mout_apll = {
@@ -145,11 +214,29 @@ static struct clksrc_clk exynos5_clk_sclk_apll = {
 	.reg_div = { .reg = EXYNOS5_CLKDIV_CPU0, .shift = 24, .size = 3 },
 };
 
+static struct clksrc_clk exynos5_clk_mout_bpll_fout = {
+	.clk	= {
+		.name		= "mout_bpll_fout",
+	},
+	.sources = &clk_src_bpll_fout,
+	.reg_src = { .reg = EXYNOS5_PLL_DIV2_SEL, .shift = 0, .size = 1 },
+};
+
+static struct clk *exynos5_clk_src_bpll_list[] = {
+	[0] = &clk_fin_bpll,
+	[1] = &exynos5_clk_mout_bpll_fout.clk,
+};
+
+static struct clksrc_sources exynos5_clk_src_bpll = {
+	.sources	= exynos5_clk_src_bpll_list,
+	.nr_sources	= ARRAY_SIZE(exynos5_clk_src_bpll_list),
+};
+
 static struct clksrc_clk exynos5_clk_mout_bpll = {
 	.clk	= {
 		.name		= "mout_bpll",
 	},
-	.sources = &clk_src_bpll,
+	.sources = &exynos5_clk_src_bpll,
 	.reg_src = { .reg = EXYNOS5_CLKSRC_CDREX, .shift = 0, .size = 1 },
 };
 
@@ -187,11 +274,29 @@ static struct clksrc_clk exynos5_clk_mout_epll = {
 	.reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 12, .size = 1 },
 };
 
+static struct clksrc_clk exynos5_clk_mout_mpll_fout = {
+	.clk	= {
+		.name		= "mout_mpll_fout",
+	},
+	.sources = &clk_src_mpll_fout,
+	.reg_src = { .reg = EXYNOS5_PLL_DIV2_SEL, .shift = 4, .size = 1 },
+};
+
+static struct clk *exynos5_clk_src_mpll_list[] = {
+	[0] = &clk_fin_mpll,
+	[1] = &exynos5_clk_mout_mpll_fout.clk,
+};
+
+static struct clksrc_sources exynos5_clk_src_mpll = {
+	.sources	= exynos5_clk_src_mpll_list,
+	.nr_sources	= ARRAY_SIZE(exynos5_clk_src_mpll_list),
+};
+
 struct clksrc_clk exynos5_clk_mout_mpll = {
 	.clk = {
 		.name		= "mout_mpll",
 	},
-	.sources = &clk_src_mpll,
+	.sources = &exynos5_clk_src_mpll,
 	.reg_src = { .reg = EXYNOS5_CLKSRC_CORE1, .shift = 8, .size = 1 },
 };
 
@@ -454,26 +559,31 @@ static struct clk exynos5_init_clocks_off[] = {
 		.enable		= exynos5_clk_ip_peris_ctrl,
 		.ctrlbit	= (1 << 20),
 	}, {
+		.name		= "watchdog",
+		.parent		= &exynos5_clk_aclk_66.clk,
+		.enable		= exynos5_clk_ip_peris_ctrl,
+		.ctrlbit	= (1 << 19),
+	}, {
 		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.0",
+		.devname	= "exynos4-sdhci.0",
 		.parent		= &exynos5_clk_aclk_200.clk,
 		.enable		= exynos5_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 12),
 	}, {
 		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.1",
+		.devname	= "exynos4-sdhci.1",
 		.parent		= &exynos5_clk_aclk_200.clk,
 		.enable		= exynos5_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 13),
 	}, {
 		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.2",
+		.devname	= "exynos4-sdhci.2",
 		.parent		= &exynos5_clk_aclk_200.clk,
 		.enable		= exynos5_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 14),
 	}, {
 		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.3",
+		.devname	= "exynos4-sdhci.3",
 		.parent		= &exynos5_clk_aclk_200.clk,
 		.enable		= exynos5_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 15),
@@ -630,6 +740,76 @@ static struct clk exynos5_init_clocks_off[] = {
 		.parent		= &exynos5_clk_aclk_66.clk,
 		.enable		= exynos5_clk_ip_peric_ctrl,
 		.ctrlbit	= (1 << 14),
+	}, {
+		.name		= SYSMMU_CLOCK_NAME,
+		.devname	= SYSMMU_CLOCK_DEVNAME(mfc_l, 0),
+		.enable		= &exynos5_clk_ip_mfc_ctrl,
+		.ctrlbit	= (1 << 1),
+	}, {
+		.name		= SYSMMU_CLOCK_NAME,
+		.devname	= SYSMMU_CLOCK_DEVNAME(mfc_r, 1),
+		.enable		= &exynos5_clk_ip_mfc_ctrl,
+		.ctrlbit	= (1 << 2),
+	}, {
+		.name		= SYSMMU_CLOCK_NAME,
+		.devname	= SYSMMU_CLOCK_DEVNAME(tv, 2),
+		.enable		= &exynos5_clk_ip_disp1_ctrl,
+		.ctrlbit	= (1 << 9)
+	}, {
+		.name		= SYSMMU_CLOCK_NAME,
+		.devname	= SYSMMU_CLOCK_DEVNAME(jpeg, 3),
+		.enable		= &exynos5_clk_ip_gen_ctrl,
+		.ctrlbit	= (1 << 7),
+	}, {
+		.name		= SYSMMU_CLOCK_NAME,
+		.devname	= SYSMMU_CLOCK_DEVNAME(rot, 4),
+		.enable		= &exynos5_clk_ip_gen_ctrl,
+		.ctrlbit	= (1 << 6)
+	}, {
+		.name		= SYSMMU_CLOCK_NAME,
+		.devname	= SYSMMU_CLOCK_DEVNAME(gsc0, 5),
+		.enable		= &exynos5_clk_ip_gscl_ctrl,
+		.ctrlbit	= (1 << 7),
+	}, {
+		.name		= SYSMMU_CLOCK_NAME,
+		.devname	= SYSMMU_CLOCK_DEVNAME(gsc1, 6),
+		.enable		= &exynos5_clk_ip_gscl_ctrl,
+		.ctrlbit	= (1 << 8),
+	}, {
+		.name		= SYSMMU_CLOCK_NAME,
+		.devname	= SYSMMU_CLOCK_DEVNAME(gsc2, 7),
+		.enable		= &exynos5_clk_ip_gscl_ctrl,
+		.ctrlbit	= (1 << 9),
+	}, {
+		.name		= SYSMMU_CLOCK_NAME,
+		.devname	= SYSMMU_CLOCK_DEVNAME(gsc3, 8),
+		.enable		= &exynos5_clk_ip_gscl_ctrl,
+		.ctrlbit	= (1 << 10),
+	}, {
+		.name		= SYSMMU_CLOCK_NAME,
+		.devname	= SYSMMU_CLOCK_DEVNAME(isp, 9),
+		.enable		= &exynos5_clk_ip_isp0_ctrl,
+		.ctrlbit	= (0x3F << 8),
+	}, {
+		.name		= SYSMMU_CLOCK_NAME2,
+		.devname	= SYSMMU_CLOCK_DEVNAME(isp, 9),
+		.enable		= &exynos5_clk_ip_isp1_ctrl,
+		.ctrlbit	= (0xF << 4),
+	}, {
+		.name		= SYSMMU_CLOCK_NAME,
+		.devname	= SYSMMU_CLOCK_DEVNAME(camif0, 12),
+		.enable		= &exynos5_clk_ip_gscl_ctrl,
+		.ctrlbit	= (1 << 11),
+	}, {
+		.name		= SYSMMU_CLOCK_NAME,
+		.devname	= SYSMMU_CLOCK_DEVNAME(camif1, 13),
+		.enable		= &exynos5_clk_ip_gscl_ctrl,
+		.ctrlbit	= (1 << 12),
+	}, {
+		.name		= SYSMMU_CLOCK_NAME,
+		.devname	= SYSMMU_CLOCK_DEVNAME(2d, 14),
+		.enable		= &exynos5_clk_ip_acp_ctrl,
+		.ctrlbit	= (1 << 7)
 	}
 };
 
@@ -678,7 +858,7 @@ static struct clk exynos5_clk_pdma1 = {
 	.name		= "dma",
 	.devname	= "dma-pl330.1",
 	.enable		= exynos5_clk_ip_fsys_ctrl,
-	.ctrlbit	= (1 << 1),
+	.ctrlbit	= (1 << 2),
 };
 
 static struct clk exynos5_clk_mdma1 = {
@@ -813,7 +993,7 @@ static struct clksrc_clk exynos5_clk_sclk_uart3 = {
 static struct clksrc_clk exynos5_clk_sclk_mmc0 = {
 	.clk	= {
 		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.0",
+		.devname	= "exynos4-sdhci.0",
 		.parent		= &exynos5_clk_dout_mmc0.clk,
 		.enable		= exynos5_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 0),
@@ -824,7 +1004,7 @@ static struct clksrc_clk exynos5_clk_sclk_mmc0 = {
 static struct clksrc_clk exynos5_clk_sclk_mmc1 = {
 	.clk	= {
 		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.1",
+		.devname	= "exynos4-sdhci.1",
 		.parent		= &exynos5_clk_dout_mmc1.clk,
 		.enable		= exynos5_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 4),
@@ -835,7 +1015,7 @@ static struct clksrc_clk exynos5_clk_sclk_mmc1 = {
 static struct clksrc_clk exynos5_clk_sclk_mmc2 = {
 	.clk	= {
 		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.2",
+		.devname	= "exynos4-sdhci.2",
 		.parent		= &exynos5_clk_dout_mmc2.clk,
 		.enable		= exynos5_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 8),
@@ -846,7 +1026,7 @@ static struct clksrc_clk exynos5_clk_sclk_mmc2 = {
 static struct clksrc_clk exynos5_clk_sclk_mmc3 = {
 	.clk	= {
 		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.3",
+		.devname	= "exynos4-sdhci.3",
 		.parent		= &exynos5_clk_dout_mmc3.clk,
 		.enable		= exynos5_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 12),
@@ -941,10 +1121,12 @@ static struct clksrc_clk *exynos5_sysclks[] = {
 	&exynos5_clk_mout_apll,
 	&exynos5_clk_sclk_apll,
 	&exynos5_clk_mout_bpll,
+	&exynos5_clk_mout_bpll_fout,
 	&exynos5_clk_mout_bpll_user,
 	&exynos5_clk_mout_cpll,
 	&exynos5_clk_mout_epll,
 	&exynos5_clk_mout_mpll,
+	&exynos5_clk_mout_mpll_fout,
 	&exynos5_clk_mout_mpll_user,
 	&exynos5_clk_vpllsrc,
 	&exynos5_clk_sclk_vpll,
@@ -990,10 +1172,10 @@ static struct clk_lookup exynos5_clk_lookup[] = {
 	CLKDEV_INIT("exynos4210-uart.1", "clk_uart_baud0", &exynos5_clk_sclk_uart1.clk),
 	CLKDEV_INIT("exynos4210-uart.2", "clk_uart_baud0", &exynos5_clk_sclk_uart2.clk),
 	CLKDEV_INIT("exynos4210-uart.3", "clk_uart_baud0", &exynos5_clk_sclk_uart3.clk),
-	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &exynos5_clk_sclk_mmc0.clk),
-	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &exynos5_clk_sclk_mmc1.clk),
-	CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &exynos5_clk_sclk_mmc2.clk),
-	CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.2", &exynos5_clk_sclk_mmc3.clk),
+	CLKDEV_INIT("exynos4-sdhci.0", "mmc_busclk.2", &exynos5_clk_sclk_mmc0.clk),
+	CLKDEV_INIT("exynos4-sdhci.1", "mmc_busclk.2", &exynos5_clk_sclk_mmc1.clk),
+	CLKDEV_INIT("exynos4-sdhci.2", "mmc_busclk.2", &exynos5_clk_sclk_mmc2.clk),
+	CLKDEV_INIT("exynos4-sdhci.3", "mmc_busclk.2", &exynos5_clk_sclk_mmc3.clk),
 	CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos5_clk_pdma0),
 	CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos5_clk_pdma1),
 	CLKDEV_INIT("dma-pl330.2", "apb_pclk", &exynos5_clk_mdma1),
@@ -1008,7 +1190,9 @@ static struct clk *exynos5_clks[] __initdata = {
 	&exynos5_clk_sclk_hdmi27m,
 	&exynos5_clk_sclk_hdmiphy,
 	&clk_fout_bpll,
+	&clk_fout_bpll_div2,
 	&clk_fout_cpll,
+	&clk_fout_mpll_div2,
 	&exynos5_clk_armclk,
 };
 
@@ -1173,8 +1357,10 @@ void __init_or_cpufreq exynos5_setup_clocks(void)
 
 	clk_fout_apll.ops = &exynos5_fout_apll_ops;
 	clk_fout_bpll.rate = bpll;
+	clk_fout_bpll_div2.rate = bpll >> 1;
 	clk_fout_cpll.rate = cpll;
 	clk_fout_mpll.rate = mpll;
+	clk_fout_mpll_div2.rate = mpll >> 1;
 	clk_fout_epll.rate = epll;
 	clk_fout_vpll.rate = vpll;
 
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index e6cc50e94a58..742edd3bbec3 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -19,6 +19,9 @@
 #include <linux/serial_core.h>
 #include <linux/of.h>
 #include <linux/of_irq.h>
+#include <linux/export.h>
+#include <linux/irqdomain.h>
+#include <linux/of_address.h>
 
 #include <asm/proc-fns.h>
 #include <asm/exception.h>
@@ -265,12 +268,12 @@ static struct map_desc exynos5_iodesc[] __initdata = {
 	}, {
 		.virtual	= (unsigned long)S5P_VA_GIC_CPU,
 		.pfn		= __phys_to_pfn(EXYNOS5_PA_GIC_CPU),
-		.length		= SZ_64K,
+		.length		= SZ_8K,
 		.type		= MT_DEVICE,
 	}, {
 		.virtual	= (unsigned long)S5P_VA_GIC_DIST,
 		.pfn		= __phys_to_pfn(EXYNOS5_PA_GIC_DIST),
-		.length		= SZ_64K,
+		.length		= SZ_4K,
 		.type		= MT_DEVICE,
 	},
 };
@@ -285,6 +288,11 @@ void exynos5_restart(char mode, const char *cmd)
 	__raw_writel(0x1, EXYNOS_SWRESET);
 }
 
+void __init exynos_init_late(void)
+{
+	exynos_pm_late_initcall();
+}
+
 /*
  * exynos_map_io
  *
@@ -326,6 +334,11 @@ static void __init exynos4_map_io(void)
 	s3c_fimc_setname(2, "exynos4-fimc");
 	s3c_fimc_setname(3, "exynos4-fimc");
 
+	s3c_sdhci_setname(0, "exynos4-sdhci");
+	s3c_sdhci_setname(1, "exynos4-sdhci");
+	s3c_sdhci_setname(2, "exynos4-sdhci");
+	s3c_sdhci_setname(3, "exynos4-sdhci");
+
 	/* The I2C bus controllers are directly compatible with s3c2440 */
 	s3c_i2c0_setname("s3c2440-i2c");
 	s3c_i2c1_setname("s3c2440-i2c");
@@ -344,6 +357,11 @@ static void __init exynos5_map_io(void)
 	s3c_device_i2c0.resource[1].start = EXYNOS5_IRQ_IIC;
 	s3c_device_i2c0.resource[1].end   = EXYNOS5_IRQ_IIC;
 
+	s3c_sdhci_setname(0, "exynos4-sdhci");
+	s3c_sdhci_setname(1, "exynos4-sdhci");
+	s3c_sdhci_setname(2, "exynos4-sdhci");
+	s3c_sdhci_setname(3, "exynos4-sdhci");
+
 	/* The I2C bus controllers are directly compatible with s3c2440 */
 	s3c_i2c0_setname("s3c2440-i2c");
 	s3c_i2c1_setname("s3c2440-i2c");
@@ -389,6 +407,7 @@ struct combiner_chip_data {
 	void __iomem *base;
 };
 
+static struct irq_domain *combiner_irq_domain;
 static struct combiner_chip_data combiner_data[MAX_COMBINER_NR];
 
 static inline void __iomem *combiner_base(struct irq_data *data)
@@ -401,14 +420,14 @@ static inline void __iomem *combiner_base(struct irq_data *data)
 
 static void combiner_mask_irq(struct irq_data *data)
 {
-	u32 mask = 1 << (data->irq % 32);
+	u32 mask = 1 << (data->hwirq % 32);
 
 	__raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_CLEAR);
 }
 
 static void combiner_unmask_irq(struct irq_data *data)
 {
-	u32 mask = 1 << (data->irq % 32);
+	u32 mask = 1 << (data->hwirq % 32);
 
 	__raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_SET);
 }
@@ -464,49 +483,131 @@ static void __init combiner_cascade_irq(unsigned int combiner_nr, unsigned int i
 	irq_set_chained_handler(irq, combiner_handle_cascade_irq);
 }
 
-static void __init combiner_init(unsigned int combiner_nr, void __iomem *base,
-			  unsigned int irq_start)
+static void __init combiner_init_one(unsigned int combiner_nr,
+				     void __iomem *base)
 {
-	unsigned int i;
-	unsigned int max_nr;
-
-	if (soc_is_exynos5250())
-		max_nr = EXYNOS5_MAX_COMBINER_NR;
-	else
-		max_nr = EXYNOS4_MAX_COMBINER_NR;
-
-	if (combiner_nr >= max_nr)
-		BUG();
-
 	combiner_data[combiner_nr].base = base;
-	combiner_data[combiner_nr].irq_offset = irq_start;
+	combiner_data[combiner_nr].irq_offset = irq_find_mapping(
+		combiner_irq_domain, combiner_nr * MAX_IRQ_IN_COMBINER);
 	combiner_data[combiner_nr].irq_mask = 0xff << ((combiner_nr % 4) << 3);
 
 	/* Disable all interrupts */
-
 	__raw_writel(combiner_data[combiner_nr].irq_mask,
 		     base + COMBINER_ENABLE_CLEAR);
+}
 
-	/* Setup the Linux IRQ subsystem */
+#ifdef CONFIG_OF
+static int combiner_irq_domain_xlate(struct irq_domain *d,
+				     struct device_node *controller,
+				     const u32 *intspec, unsigned int intsize,
+				     unsigned long *out_hwirq,
+				     unsigned int *out_type)
+{
+	if (d->of_node != controller)
+		return -EINVAL;
+
+	if (intsize < 2)
+		return -EINVAL;
+
+	*out_hwirq = intspec[0] * MAX_IRQ_IN_COMBINER + intspec[1];
+	*out_type = 0;
+
+	return 0;
+}
+#else
+static int combiner_irq_domain_xlate(struct irq_domain *d,
+				     struct device_node *controller,
+				     const u32 *intspec, unsigned int intsize,
+				     unsigned long *out_hwirq,
+				     unsigned int *out_type)
+{
+	return -EINVAL;
+}
+#endif
+
+static int combiner_irq_domain_map(struct irq_domain *d, unsigned int irq,
+				   irq_hw_number_t hw)
+{
+	irq_set_chip_and_handler(irq, &combiner_chip, handle_level_irq);
+	irq_set_chip_data(irq, &combiner_data[hw >> 3]);
+	set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+
+	return 0;
+}
+
+static struct irq_domain_ops combiner_irq_domain_ops = {
+	.xlate	= combiner_irq_domain_xlate,
+	.map	= combiner_irq_domain_map,
+};
 
-	for (i = irq_start; i < combiner_data[combiner_nr].irq_offset
-				+ MAX_IRQ_IN_COMBINER; i++) {
-		irq_set_chip_and_handler(i, &combiner_chip, handle_level_irq);
-		irq_set_chip_data(i, &combiner_data[combiner_nr]);
-		set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+void __init combiner_init(void __iomem *combiner_base, struct device_node *np)
+{
+	int i, irq, irq_base;
+	unsigned int max_nr, nr_irq;
+
+	if (np) {
+		if (of_property_read_u32(np, "samsung,combiner-nr", &max_nr)) {
+			pr_warning("%s: number of combiners not specified, "
+				"setting default as %d.\n",
+				__func__, EXYNOS4_MAX_COMBINER_NR);
+			max_nr = EXYNOS4_MAX_COMBINER_NR;
+		}
+	} else {
+		max_nr = soc_is_exynos5250() ? EXYNOS5_MAX_COMBINER_NR :
+						EXYNOS4_MAX_COMBINER_NR;
+	}
+	nr_irq = max_nr * MAX_IRQ_IN_COMBINER;
+
+	irq_base = irq_alloc_descs(COMBINER_IRQ(0, 0), 1, nr_irq, 0);
+	if (IS_ERR_VALUE(irq_base)) {
+		irq_base = COMBINER_IRQ(0, 0);
+		pr_warning("%s: irq desc alloc failed. Continuing with %d as linux irq base\n", __func__, irq_base);
+	}
+
+	combiner_irq_domain = irq_domain_add_legacy(np, nr_irq, irq_base, 0,
+				&combiner_irq_domain_ops, &combiner_data);
+	if (WARN_ON(!combiner_irq_domain)) {
+		pr_warning("%s: irq domain init failed\n", __func__);
+		return;
+	}
+
+	for (i = 0; i < max_nr; i++) {
+		combiner_init_one(i, combiner_base + (i >> 2) * 0x10);
+		irq = IRQ_SPI(i);
+#ifdef CONFIG_OF
+		if (np)
+			irq = irq_of_parse_and_map(np, i);
+#endif
+		combiner_cascade_irq(i, irq);
 	}
 }
 
 #ifdef CONFIG_OF
+int __init combiner_of_init(struct device_node *np, struct device_node *parent)
+{
+	void __iomem *combiner_base;
+
+	combiner_base = of_iomap(np, 0);
+	if (!combiner_base) {
+		pr_err("%s: failed to map combiner registers\n", __func__);
+		return -ENXIO;
+	}
+
+	combiner_init(combiner_base, np);
+
+	return 0;
+}
+
 static const struct of_device_id exynos4_dt_irq_match[] = {
 	{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
+	{ .compatible = "samsung,exynos4210-combiner",
+			.data = combiner_of_init, },
 	{},
 };
 #endif
 
 void __init exynos4_init_irq(void)
 {
-	int irq;
 	unsigned int gic_bank_offset;
 
 	gic_bank_offset = soc_is_exynos4412() ? 0x4000 : 0x8000;
@@ -518,12 +619,8 @@ void __init exynos4_init_irq(void)
 		of_irq_init(exynos4_dt_irq_match);
 #endif
 
-	for (irq = 0; irq < EXYNOS4_MAX_COMBINER_NR; irq++) {
-
-		combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq),
-				COMBINER_IRQ(irq, 0));
-		combiner_cascade_irq(irq, IRQ_SPI(irq));
-	}
+	if (!of_have_populated_dt())
+		combiner_init(S5P_VA_COMBINER_BASE, NULL);
 
 	/*
 	 * The parameters of s5p_init_irq() are for VIC init.
@@ -535,16 +632,9 @@ void __init exynos4_init_irq(void)
 
 void __init exynos5_init_irq(void)
 {
-	int irq;
-
-	gic_init(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
-
-	for (irq = 0; irq < EXYNOS5_MAX_COMBINER_NR; irq++) {
-		combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq),
-				COMBINER_IRQ(irq, 0));
-		combiner_cascade_irq(irq, IRQ_SPI(irq));
-	}
-
+#ifdef CONFIG_OF
+	of_irq_init(exynos4_dt_irq_match);
+#endif
 	/*
 	 * The parameters of s5p_init_irq() are for VIC init.
 	 * Theses parameters should be NULL and 0 because EXYNOS4
@@ -553,40 +643,29 @@ void __init exynos5_init_irq(void)
 	s5p_init_irq(NULL, 0);
 }
 
-struct bus_type exynos4_subsys = {
-	.name		= "exynos4-core",
-	.dev_name	= "exynos4-core",
-};
-
-struct bus_type exynos5_subsys = {
-	.name		= "exynos5-core",
-	.dev_name	= "exynos5-core",
+struct bus_type exynos_subsys = {
+	.name		= "exynos-core",
+	.dev_name	= "exynos-core",
 };
 
 static struct device exynos4_dev = {
-	.bus	= &exynos4_subsys,
-};
-
-static struct device exynos5_dev = {
-	.bus	= &exynos5_subsys,
+	.bus	= &exynos_subsys,
 };
 
 static int __init exynos_core_init(void)
 {
-	if (soc_is_exynos5250())
-		return subsys_system_register(&exynos5_subsys, NULL);
-	else
-		return subsys_system_register(&exynos4_subsys, NULL);
+	return subsys_system_register(&exynos_subsys, NULL);
 }
 core_initcall(exynos_core_init);
 
 #ifdef CONFIG_CACHE_L2X0
 static int __init exynos4_l2x0_cache_init(void)
 {
+	int ret;
+
 	if (soc_is_exynos5250())
 		return 0;
 
-	int ret;
 	ret = l2x0_of_init(L2_AUX_VAL, L2_AUX_MASK);
 	if (!ret) {
 		l2x0_regs_phys = virt_to_phys(&l2x0_saved_regs);
@@ -662,10 +741,7 @@ static int __init exynos_init(void)
 {
 	printk(KERN_INFO "EXYNOS: Initializing architecture\n");
 
-	if (soc_is_exynos5250())
-		return device_register(&exynos5_dev);
-	else
-		return device_register(&exynos4_dev);
+	return device_register(&exynos4_dev);
 }
 
 /* uart registration process */
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index 677b5467df18..aed2eeb06517 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -19,6 +19,13 @@ void exynos4_init_irq(void);
 void exynos5_init_irq(void);
 void exynos4_restart(char mode, const char *cmd);
 void exynos5_restart(char mode, const char *cmd);
+void exynos_init_late(void);
+
+#ifdef CONFIG_PM_GENERIC_DOMAINS
+int exynos_pm_late_initcall(void);
+#else
+static int exynos_pm_late_initcall(void) { return 0; }
+#endif
 
 #ifdef CONFIG_ARCH_EXYNOS4
 void exynos4_register_clocks(void);
diff --git a/arch/arm/mach-exynos/cpuidle.c b/arch/arm/mach-exynos/cpuidle.c
index 33ab4e7558af..cff0595d0d35 100644
--- a/arch/arm/mach-exynos/cpuidle.c
+++ b/arch/arm/mach-exynos/cpuidle.c
@@ -20,6 +20,7 @@
 #include <asm/smp_scu.h>
 #include <asm/suspend.h>
 #include <asm/unified.h>
+#include <asm/cpuidle.h>
 #include <mach/regs-pmu.h>
 #include <mach/pmu.h>
 
@@ -34,22 +35,12 @@
 
 #define S5P_CHECK_AFTR		0xFCBA0D10
 
-static int exynos4_enter_idle(struct cpuidle_device *dev,
-			struct cpuidle_driver *drv,
-			      int index);
 static int exynos4_enter_lowpower(struct cpuidle_device *dev,
 				struct cpuidle_driver *drv,
 				int index);
 
 static struct cpuidle_state exynos4_cpuidle_set[] __initdata = {
-	[0] = {
-		.enter			= exynos4_enter_idle,
-		.exit_latency		= 1,
-		.target_residency	= 100000,
-		.flags			= CPUIDLE_FLAG_TIME_VALID,
-		.name			= "C0",
-		.desc			= "ARM clock gating(WFI)",
-	},
+	[0] = ARM_CPUIDLE_WFI_STATE,
 	[1] = {
 		.enter			= exynos4_enter_lowpower,
 		.exit_latency		= 300,
@@ -63,8 +54,9 @@ static struct cpuidle_state exynos4_cpuidle_set[] __initdata = {
 static DEFINE_PER_CPU(struct cpuidle_device, exynos4_cpuidle_device);
 
 static struct cpuidle_driver exynos4_idle_driver = {
-	.name		= "exynos4_idle",
-	.owner		= THIS_MODULE,
+	.name			= "exynos4_idle",
+	.owner			= THIS_MODULE,
+	.en_core_tk_irqen	= 1,
 };
 
 /* Ext-GIC nIRQ/nFIQ is the only wakeup source in AFTR */
@@ -103,17 +95,12 @@ static int exynos4_enter_core0_aftr(struct cpuidle_device *dev,
 				struct cpuidle_driver *drv,
 				int index)
 {
-	struct timeval before, after;
-	int idle_time;
 	unsigned long tmp;
 
-	local_irq_disable();
-	do_gettimeofday(&before);
-
 	exynos4_set_wakeupmask();
 
 	/* Set value of power down register for aftr mode */
-	exynos4_sys_powerdown_conf(SYS_AFTR);
+	exynos_sys_powerdown_conf(SYS_AFTR);
 
 	__raw_writel(virt_to_phys(s3c_cpu_resume), REG_DIRECTGO_ADDR);
 	__raw_writel(S5P_CHECK_AFTR, REG_DIRECTGO_FLAG);
@@ -150,34 +137,6 @@ static int exynos4_enter_core0_aftr(struct cpuidle_device *dev,
 	/* Clear wakeup state register */
 	__raw_writel(0x0, S5P_WAKEUP_STAT);
 
-	do_gettimeofday(&after);
-
-	local_irq_enable();
-	idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC +
-		    (after.tv_usec - before.tv_usec);
-
-	dev->last_residency = idle_time;
-	return index;
-}
-
-static int exynos4_enter_idle(struct cpuidle_device *dev,
-				struct cpuidle_driver *drv,
-				int index)
-{
-	struct timeval before, after;
-	int idle_time;
-
-	local_irq_disable();
-	do_gettimeofday(&before);
-
-	cpu_do_idle();
-
-	do_gettimeofday(&after);
-	local_irq_enable();
-	idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC +
-		    (after.tv_usec - before.tv_usec);
-
-	dev->last_residency = idle_time;
 	return index;
 }
 
@@ -192,7 +151,7 @@ static int exynos4_enter_lowpower(struct cpuidle_device *dev,
 		new_index = drv->safe_state_index;
 
 	if (new_index == 0)
-		return exynos4_enter_idle(dev, drv, new_index);
+		return arm_cpuidle_simple_enter(dev, drv, new_index);
 	else
 		return exynos4_enter_core0_aftr(dev, drv, new_index);
 }
diff --git a/arch/arm/mach-exynos/dev-ahci.c b/arch/arm/mach-exynos/dev-ahci.c
index 50ce5b0adcf1..ce1aad3eeeb9 100644
--- a/arch/arm/mach-exynos/dev-ahci.c
+++ b/arch/arm/mach-exynos/dev-ahci.c
@@ -236,16 +236,8 @@ static struct ahci_platform_data exynos4_ahci_pdata = {
 };
 
 static struct resource exynos4_ahci_resource[] = {
-	[0] = {
-		.start	= EXYNOS4_PA_SATA,
-		.end	= EXYNOS4_PA_SATA + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= EXYNOS4_IRQ_SATA,
-		.end	= EXYNOS4_IRQ_SATA,
-		.flags	= IORESOURCE_IRQ,
-	},
+	[0] = DEFINE_RES_MEM(EXYNOS4_PA_SATA, SZ_64K),
+	[1] = DEFINE_RES_IRQ(EXYNOS4_IRQ_SATA),
 };
 
 static u64 exynos4_ahci_dmamask = DMA_BIT_MASK(32);
diff --git a/arch/arm/mach-exynos/dev-audio.c b/arch/arm/mach-exynos/dev-audio.c
index 7199e1ae79b4..b33a5b67b547 100644
--- a/arch/arm/mach-exynos/dev-audio.c
+++ b/arch/arm/mach-exynos/dev-audio.c
@@ -62,26 +62,10 @@ static struct s3c_audio_pdata i2sv5_pdata = {
 };
 
 static struct resource exynos4_i2s0_resource[] = {
-	[0] = {
-		.start	= EXYNOS4_PA_I2S0,
-		.end	= EXYNOS4_PA_I2S0 + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= DMACH_I2S0_TX,
-		.end	= DMACH_I2S0_TX,
-		.flags	= IORESOURCE_DMA,
-	},
-	[2] = {
-		.start	= DMACH_I2S0_RX,
-		.end	= DMACH_I2S0_RX,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		.start	= DMACH_I2S0S_TX,
-		.end	= DMACH_I2S0S_TX,
-		.flags	= IORESOURCE_DMA,
-	},
+	[0] = DEFINE_RES_MEM(EXYNOS4_PA_I2S0, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_I2S0_TX),
+	[2] = DEFINE_RES_DMA(DMACH_I2S0_RX),
+	[3] = DEFINE_RES_DMA(DMACH_I2S0S_TX),
 };
 
 struct platform_device exynos4_device_i2s0 = {
@@ -110,21 +94,9 @@ static struct s3c_audio_pdata i2sv3_pdata = {
 };
 
 static struct resource exynos4_i2s1_resource[] = {
-	[0] = {
-		.start	= EXYNOS4_PA_I2S1,
-		.end	= EXYNOS4_PA_I2S1 + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= DMACH_I2S1_TX,
-		.end	= DMACH_I2S1_TX,
-		.flags	= IORESOURCE_DMA,
-	},
-	[2] = {
-		.start	= DMACH_I2S1_RX,
-		.end	= DMACH_I2S1_RX,
-		.flags	= IORESOURCE_DMA,
-	},
+	[0] = DEFINE_RES_MEM(EXYNOS4_PA_I2S1, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_I2S1_TX),
+	[2] = DEFINE_RES_DMA(DMACH_I2S1_RX),
 };
 
 struct platform_device exynos4_device_i2s1 = {
@@ -138,21 +110,9 @@ struct platform_device exynos4_device_i2s1 = {
 };
 
 static struct resource exynos4_i2s2_resource[] = {
-	[0] = {
-		.start	= EXYNOS4_PA_I2S2,
-		.end	= EXYNOS4_PA_I2S2 + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= DMACH_I2S2_TX,
-		.end	= DMACH_I2S2_TX,
-		.flags	= IORESOURCE_DMA,
-	},
-	[2] = {
-		.start	= DMACH_I2S2_RX,
-		.end	= DMACH_I2S2_RX,
-		.flags	= IORESOURCE_DMA,
-	},
+	[0] = DEFINE_RES_MEM(EXYNOS4_PA_I2S2, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_I2S2_TX),
+	[2] = DEFINE_RES_DMA(DMACH_I2S2_RX),
 };
 
 struct platform_device exynos4_device_i2s2 = {
@@ -192,21 +152,9 @@ static struct s3c_audio_pdata s3c_pcm_pdata = {
 };
 
 static struct resource exynos4_pcm0_resource[] = {
-	[0] = {
-		.start	= EXYNOS4_PA_PCM0,
-		.end	= EXYNOS4_PA_PCM0 + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= DMACH_PCM0_TX,
-		.end	= DMACH_PCM0_TX,
-		.flags	= IORESOURCE_DMA,
-	},
-	[2] = {
-		.start	= DMACH_PCM0_RX,
-		.end	= DMACH_PCM0_RX,
-		.flags	= IORESOURCE_DMA,
-	},
+	[0] = DEFINE_RES_MEM(EXYNOS4_PA_PCM0, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_PCM0_TX),
+	[2] = DEFINE_RES_DMA(DMACH_PCM0_RX),
 };
 
 struct platform_device exynos4_device_pcm0 = {
@@ -220,21 +168,9 @@ struct platform_device exynos4_device_pcm0 = {
 };
 
 static struct resource exynos4_pcm1_resource[] = {
-	[0] = {
-		.start	= EXYNOS4_PA_PCM1,
-		.end	= EXYNOS4_PA_PCM1 + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= DMACH_PCM1_TX,
-		.end	= DMACH_PCM1_TX,
-		.flags	= IORESOURCE_DMA,
-	},
-	[2] = {
-		.start	= DMACH_PCM1_RX,
-		.end	= DMACH_PCM1_RX,
-		.flags	= IORESOURCE_DMA,
-	},
+	[0] = DEFINE_RES_MEM(EXYNOS4_PA_PCM1, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_PCM1_TX),
+	[2] = DEFINE_RES_DMA(DMACH_PCM1_RX),
 };
 
 struct platform_device exynos4_device_pcm1 = {
@@ -248,21 +184,9 @@ struct platform_device exynos4_device_pcm1 = {
 };
 
 static struct resource exynos4_pcm2_resource[] = {
-	[0] = {
-		.start	= EXYNOS4_PA_PCM2,
-		.end	= EXYNOS4_PA_PCM2 + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= DMACH_PCM2_TX,
-		.end	= DMACH_PCM2_TX,
-		.flags	= IORESOURCE_DMA,
-	},
-	[2] = {
-		.start	= DMACH_PCM2_RX,
-		.end	= DMACH_PCM2_RX,
-		.flags	= IORESOURCE_DMA,
-	},
+	[0] = DEFINE_RES_MEM(EXYNOS4_PA_PCM2, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_PCM2_TX),
+	[2] = DEFINE_RES_DMA(DMACH_PCM2_RX),
 };
 
 struct platform_device exynos4_device_pcm2 = {
@@ -283,31 +207,11 @@ static int exynos4_ac97_cfg_gpio(struct platform_device *pdev)
 }
 
 static struct resource exynos4_ac97_resource[] = {
-	[0] = {
-		.start	= EXYNOS4_PA_AC97,
-		.end	= EXYNOS4_PA_AC97 + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= DMACH_AC97_PCMOUT,
-		.end	= DMACH_AC97_PCMOUT,
-		.flags	= IORESOURCE_DMA,
-	},
-	[2] = {
-		.start	= DMACH_AC97_PCMIN,
-		.end	= DMACH_AC97_PCMIN,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		.start	= DMACH_AC97_MICIN,
-		.end	= DMACH_AC97_MICIN,
-		.flags	= IORESOURCE_DMA,
-	},
-	[4] = {
-		.start	= EXYNOS4_IRQ_AC97,
-		.end	= EXYNOS4_IRQ_AC97,
-		.flags	= IORESOURCE_IRQ,
-	},
+	[0] = DEFINE_RES_MEM(EXYNOS4_PA_AC97, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_AC97_PCMOUT),
+	[2] = DEFINE_RES_DMA(DMACH_AC97_PCMIN),
+	[3] = DEFINE_RES_DMA(DMACH_AC97_MICIN),
+	[4] = DEFINE_RES_IRQ(EXYNOS4_IRQ_AC97),
 };
 
 static struct s3c_audio_pdata s3c_ac97_pdata = {
@@ -338,16 +242,8 @@ static int exynos4_spdif_cfg_gpio(struct platform_device *pdev)
 }
 
 static struct resource exynos4_spdif_resource[] = {
-	[0] = {
-		.start	= EXYNOS4_PA_SPDIF,
-		.end	= EXYNOS4_PA_SPDIF + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= DMACH_SPDIF,
-		.end	= DMACH_SPDIF,
-		.flags	= IORESOURCE_DMA,
-	},
+	[0] = DEFINE_RES_MEM(EXYNOS4_PA_SPDIF, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_SPDIF),
 };
 
 static struct s3c_audio_pdata samsung_spdif_pdata = {
diff --git a/arch/arm/mach-exynos/dev-drm.c b/arch/arm/mach-exynos/dev-drm.c
new file mode 100644
index 000000000000..17c9c6ecc2e0
--- /dev/null
+++ b/arch/arm/mach-exynos/dev-drm.c
@@ -0,0 +1,29 @@
+/*
+ * linux/arch/arm/mach-exynos/dev-drm.c
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * EXYNOS - core DRM device
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+
+#include <plat/devs.h>
+
+static u64 exynos_drm_dma_mask = DMA_BIT_MASK(32);
+
+struct platform_device exynos_device_drm = {
+	.name	= "exynos-drm",
+	.dev	= {
+		.dma_mask		= &exynos_drm_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	}
+};
diff --git a/arch/arm/mach-exynos/dev-dwmci.c b/arch/arm/mach-exynos/dev-dwmci.c
index b025db4bf602..79035018fb74 100644
--- a/arch/arm/mach-exynos/dev-dwmci.c
+++ b/arch/arm/mach-exynos/dev-dwmci.c
@@ -16,6 +16,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
+#include <linux/ioport.h>
 #include <linux/mmc/dw_mmc.h>
 
 #include <plat/devs.h>
@@ -33,16 +34,8 @@ static int exynos4_dwmci_init(u32 slot_id, irq_handler_t handler, void *data)
 }
 
 static struct resource exynos4_dwmci_resource[] = {
-	[0] = {
-		.start	= EXYNOS4_PA_DWMCI,
-		.end	= EXYNOS4_PA_DWMCI + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_DWMCI,
-		.end	= IRQ_DWMCI,
-		.flags	= IORESOURCE_IRQ,
-	}
+	[0] = DEFINE_RES_MEM(EXYNOS4_PA_DWMCI, SZ_4K),
+	[1] = DEFINE_RES_IRQ(EXYNOS4_IRQ_DWMCI),
 };
 
 static struct dw_mci_board exynos4_dwci_pdata = {
diff --git a/arch/arm/mach-exynos/dev-sysmmu.c b/arch/arm/mach-exynos/dev-sysmmu.c
index 781563fcb156..c5b1ea301df0 100644
--- a/arch/arm/mach-exynos/dev-sysmmu.c
+++ b/arch/arm/mach-exynos/dev-sysmmu.c
@@ -1,9 +1,9 @@
-/* linux/arch/arm/mach-exynos4/dev-sysmmu.c
+/* linux/arch/arm/mach-exynos/dev-sysmmu.c
  *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  *
- * EXYNOS4 - System MMU support
+ * EXYNOS - System MMU support
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -12,222 +12,263 @@
 
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
-#include <linux/export.h>
+
+#include <plat/cpu.h>
 
 #include <mach/map.h>
 #include <mach/irqs.h>
 #include <mach/sysmmu.h>
-#include <plat/s5p-clock.h>
-
-/* These names must be equal to the clock names in mach-exynos4/clock.c */
-const char *sysmmu_ips_name[EXYNOS4_SYSMMU_TOTAL_IPNUM] = {
-	"SYSMMU_MDMA"	,
-	"SYSMMU_SSS"	,
-	"SYSMMU_FIMC0"	,
-	"SYSMMU_FIMC1"	,
-	"SYSMMU_FIMC2"	,
-	"SYSMMU_FIMC3"	,
-	"SYSMMU_JPEG"	,
-	"SYSMMU_FIMD0"	,
-	"SYSMMU_FIMD1"	,
-	"SYSMMU_PCIe"	,
-	"SYSMMU_G2D"	,
-	"SYSMMU_ROTATOR",
-	"SYSMMU_MDMA2"	,
-	"SYSMMU_TV"	,
-	"SYSMMU_MFC_L"	,
-	"SYSMMU_MFC_R"	,
-};
 
-static struct resource exynos4_sysmmu_resource[] = {
-	[0] = {
-		.start	= EXYNOS4_PA_SYSMMU_MDMA,
-		.end	= EXYNOS4_PA_SYSMMU_MDMA + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_SYSMMU_MDMA0_0,
-		.end	= IRQ_SYSMMU_MDMA0_0,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= EXYNOS4_PA_SYSMMU_SSS,
-		.end	= EXYNOS4_PA_SYSMMU_SSS + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[3] = {
-		.start	= IRQ_SYSMMU_SSS_0,
-		.end	= IRQ_SYSMMU_SSS_0,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[4] = {
-		.start	= EXYNOS4_PA_SYSMMU_FIMC0,
-		.end	= EXYNOS4_PA_SYSMMU_FIMC0 + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[5] = {
-		.start	= IRQ_SYSMMU_FIMC0_0,
-		.end	= IRQ_SYSMMU_FIMC0_0,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[6] = {
-		.start	= EXYNOS4_PA_SYSMMU_FIMC1,
-		.end	= EXYNOS4_PA_SYSMMU_FIMC1 + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[7] = {
-		.start	= IRQ_SYSMMU_FIMC1_0,
-		.end	= IRQ_SYSMMU_FIMC1_0,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[8] = {
-		.start	= EXYNOS4_PA_SYSMMU_FIMC2,
-		.end	= EXYNOS4_PA_SYSMMU_FIMC2 + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[9] = {
-		.start	= IRQ_SYSMMU_FIMC2_0,
-		.end	= IRQ_SYSMMU_FIMC2_0,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[10] = {
-		.start	= EXYNOS4_PA_SYSMMU_FIMC3,
-		.end	= EXYNOS4_PA_SYSMMU_FIMC3 + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[11] = {
-		.start	= IRQ_SYSMMU_FIMC3_0,
-		.end	= IRQ_SYSMMU_FIMC3_0,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[12] = {
-		.start	= EXYNOS4_PA_SYSMMU_JPEG,
-		.end	= EXYNOS4_PA_SYSMMU_JPEG + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[13] = {
-		.start	= IRQ_SYSMMU_JPEG_0,
-		.end	= IRQ_SYSMMU_JPEG_0,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[14] = {
-		.start	= EXYNOS4_PA_SYSMMU_FIMD0,
-		.end	= EXYNOS4_PA_SYSMMU_FIMD0 + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[15] = {
-		.start	= IRQ_SYSMMU_LCD0_M0_0,
-		.end	= IRQ_SYSMMU_LCD0_M0_0,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[16] = {
-		.start	= EXYNOS4_PA_SYSMMU_FIMD1,
-		.end	= EXYNOS4_PA_SYSMMU_FIMD1 + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[17] = {
-		.start	= IRQ_SYSMMU_LCD1_M1_0,
-		.end	= IRQ_SYSMMU_LCD1_M1_0,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[18] = {
-		.start	= EXYNOS4_PA_SYSMMU_PCIe,
-		.end	= EXYNOS4_PA_SYSMMU_PCIe + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[19] = {
-		.start	= IRQ_SYSMMU_PCIE_0,
-		.end	= IRQ_SYSMMU_PCIE_0,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[20] = {
-		.start	= EXYNOS4_PA_SYSMMU_G2D,
-		.end	= EXYNOS4_PA_SYSMMU_G2D + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[21] = {
-		.start	= IRQ_SYSMMU_2D_0,
-		.end	= IRQ_SYSMMU_2D_0,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[22] = {
-		.start	= EXYNOS4_PA_SYSMMU_ROTATOR,
-		.end	= EXYNOS4_PA_SYSMMU_ROTATOR + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[23] = {
-		.start	= IRQ_SYSMMU_ROTATOR_0,
-		.end	= IRQ_SYSMMU_ROTATOR_0,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[24] = {
-		.start	= EXYNOS4_PA_SYSMMU_MDMA2,
-		.end	= EXYNOS4_PA_SYSMMU_MDMA2 + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[25] = {
-		.start	= IRQ_SYSMMU_MDMA1_0,
-		.end	= IRQ_SYSMMU_MDMA1_0,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[26] = {
-		.start	= EXYNOS4_PA_SYSMMU_TV,
-		.end	= EXYNOS4_PA_SYSMMU_TV + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[27] = {
-		.start	= IRQ_SYSMMU_TV_M0_0,
-		.end	= IRQ_SYSMMU_TV_M0_0,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[28] = {
-		.start	= EXYNOS4_PA_SYSMMU_MFC_L,
-		.end	= EXYNOS4_PA_SYSMMU_MFC_L + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[29] = {
-		.start	= IRQ_SYSMMU_MFC_M0_0,
-		.end	= IRQ_SYSMMU_MFC_M0_0,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[30] = {
-		.start	= EXYNOS4_PA_SYSMMU_MFC_R,
-		.end	= EXYNOS4_PA_SYSMMU_MFC_R + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[31] = {
-		.start	= IRQ_SYSMMU_MFC_M1_0,
-		.end	= IRQ_SYSMMU_MFC_M1_0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
+static u64 exynos_sysmmu_dma_mask = DMA_BIT_MASK(32);
+
+#define SYSMMU_PLATFORM_DEVICE(ipname, devid)				\
+static struct sysmmu_platform_data platdata_##ipname = {		\
+	.dbgname = #ipname,						\
+};									\
+struct platform_device SYSMMU_PLATDEV(ipname) =				\
+{									\
+	.name		= SYSMMU_DEVNAME_BASE,				\
+	.id		= devid,					\
+	.dev		= {						\
+		.dma_mask		= &exynos_sysmmu_dma_mask,	\
+		.coherent_dma_mask	= DMA_BIT_MASK(32),		\
+		.platform_data		= &platdata_##ipname,		\
+	},								\
+}
+
+SYSMMU_PLATFORM_DEVICE(mfc_l,	0);
+SYSMMU_PLATFORM_DEVICE(mfc_r,	1);
+SYSMMU_PLATFORM_DEVICE(tv,	2);
+SYSMMU_PLATFORM_DEVICE(jpeg,	3);
+SYSMMU_PLATFORM_DEVICE(rot,	4);
+SYSMMU_PLATFORM_DEVICE(fimc0,	5); /* fimc* and gsc* exist exclusively */
+SYSMMU_PLATFORM_DEVICE(fimc1,	6);
+SYSMMU_PLATFORM_DEVICE(fimc2,	7);
+SYSMMU_PLATFORM_DEVICE(fimc3,	8);
+SYSMMU_PLATFORM_DEVICE(gsc0,	5);
+SYSMMU_PLATFORM_DEVICE(gsc1,	6);
+SYSMMU_PLATFORM_DEVICE(gsc2,	7);
+SYSMMU_PLATFORM_DEVICE(gsc3,	8);
+SYSMMU_PLATFORM_DEVICE(isp,	9);
+SYSMMU_PLATFORM_DEVICE(fimd0,	10);
+SYSMMU_PLATFORM_DEVICE(fimd1,	11);
+SYSMMU_PLATFORM_DEVICE(camif0,	12);
+SYSMMU_PLATFORM_DEVICE(camif1,	13);
+SYSMMU_PLATFORM_DEVICE(2d,	14);
+
+#define SYSMMU_RESOURCE_NAME(core, ipname) sysmmures_##core##_##ipname
+
+#define SYSMMU_RESOURCE(core, ipname)					\
+	static struct resource SYSMMU_RESOURCE_NAME(core, ipname)[] __initdata =
+
+#define DEFINE_SYSMMU_RESOURCE(core, mem, irq)				\
+	DEFINE_RES_MEM_NAMED(core##_PA_SYSMMU_##mem, SZ_4K, #mem),	\
+	DEFINE_RES_IRQ_NAMED(core##_IRQ_SYSMMU_##irq##_0, #mem)
+
+#define SYSMMU_RESOURCE_DEFINE(core, ipname, mem, irq)			\
+	SYSMMU_RESOURCE(core, ipname) {					\
+		DEFINE_SYSMMU_RESOURCE(core, mem, irq)			\
+	}
 
-struct platform_device exynos4_device_sysmmu = {
-	.name		= "s5p-sysmmu",
-	.id		= 32,
-	.num_resources	= ARRAY_SIZE(exynos4_sysmmu_resource),
-	.resource	= exynos4_sysmmu_resource,
+struct sysmmu_resource_map {
+	struct platform_device *pdev;
+	struct resource *res;
+	u32 rnum;
+	struct device *pdd;
+	char *clocknames;
 };
-EXPORT_SYMBOL(exynos4_device_sysmmu);
 
-static struct clk *sysmmu_clk[S5P_SYSMMU_TOTAL_IPNUM];
-void sysmmu_clk_init(struct device *dev, sysmmu_ips ips)
-{
-	sysmmu_clk[ips] = clk_get(dev, sysmmu_ips_name[ips]);
-	if (IS_ERR(sysmmu_clk[ips]))
-		sysmmu_clk[ips] = NULL;
-	else
-		clk_put(sysmmu_clk[ips]);
+#define SYSMMU_RESOURCE_MAPPING(core, ipname, resname) {		\
+	.pdev = &SYSMMU_PLATDEV(ipname),				\
+	.res = SYSMMU_RESOURCE_NAME(EXYNOS##core, resname),		\
+	.rnum = ARRAY_SIZE(SYSMMU_RESOURCE_NAME(EXYNOS##core, resname)),\
+	.clocknames = SYSMMU_CLOCK_NAME,				\
 }
 
-void sysmmu_clk_enable(sysmmu_ips ips)
-{
-	if (sysmmu_clk[ips])
-		clk_enable(sysmmu_clk[ips]);
+#define SYSMMU_RESOURCE_MAPPING_MC(core, ipname, resname, pdata) {	\
+	.pdev = &SYSMMU_PLATDEV(ipname),				\
+	.res = SYSMMU_RESOURCE_NAME(EXYNOS##core, resname),		\
+	.rnum = ARRAY_SIZE(SYSMMU_RESOURCE_NAME(EXYNOS##core, resname)),\
+	.clocknames = SYSMMU_CLOCK_NAME "," SYSMMU_CLOCK_NAME2,		\
+}
+
+#ifdef CONFIG_EXYNOS_DEV_PD
+#define SYSMMU_RESOURCE_MAPPING_PD(core, ipname, resname, pd) {		\
+	.pdev = &SYSMMU_PLATDEV(ipname),				\
+	.res = &SYSMMU_RESOURCE_NAME(EXYNOS##core, resname),		\
+	.rnum = ARRAY_SIZE(SYSMMU_RESOURCE_NAME(EXYNOS##core, resname)),\
+	.clocknames = SYSMMU_CLOCK_NAME,				\
+	.pdd = &exynos##core##_device_pd[pd].dev,			\
+}
+
+#define SYSMMU_RESOURCE_MAPPING_MCPD(core, ipname, resname, pd, pdata) {\
+	.pdev = &SYSMMU_PLATDEV(ipname),				\
+	.res = &SYSMMU_RESOURCE_NAME(EXYNOS##core, resname),		\
+	.rnum = ARRAY_SIZE(SYSMMU_RESOURCE_NAME(EXYNOS##core, resname)),\
+	.clocknames = SYSMMU_CLOCK_NAME "," SYSMMU_CLOCK_NAME2,		\
+	.pdd = &exynos##core##_device_pd[pd].dev,			\
 }
+#else
+#define SYSMMU_RESOURCE_MAPPING_PD(core, ipname, resname, pd)		\
+		SYSMMU_RESOURCE_MAPPING(core, ipname, resname)
+#define SYSMMU_RESOURCE_MAPPING_MCPD(core, ipname, resname, pd, pdata)	\
+		SYSMMU_RESOURCE_MAPPING_MC(core, ipname, resname, pdata)
+
+#endif /* CONFIG_EXYNOS_DEV_PD */
+
+#ifdef CONFIG_ARCH_EXYNOS4
+SYSMMU_RESOURCE_DEFINE(EXYNOS4, fimc0,	FIMC0,	FIMC0);
+SYSMMU_RESOURCE_DEFINE(EXYNOS4, fimc1,	FIMC1,	FIMC1);
+SYSMMU_RESOURCE_DEFINE(EXYNOS4, fimc2,	FIMC2,	FIMC2);
+SYSMMU_RESOURCE_DEFINE(EXYNOS4, fimc3,	FIMC3,	FIMC3);
+SYSMMU_RESOURCE_DEFINE(EXYNOS4, jpeg,	JPEG,	JPEG);
+SYSMMU_RESOURCE_DEFINE(EXYNOS4, 2d,	G2D,	2D);
+SYSMMU_RESOURCE_DEFINE(EXYNOS4, tv,	TV,	TV_M0);
+SYSMMU_RESOURCE_DEFINE(EXYNOS4, 2d_acp,	2D_ACP,	2D);
+SYSMMU_RESOURCE_DEFINE(EXYNOS4, rot,	ROTATOR, ROTATOR);
+SYSMMU_RESOURCE_DEFINE(EXYNOS4, fimd0,	FIMD0,	LCD0_M0);
+SYSMMU_RESOURCE_DEFINE(EXYNOS4, fimd1,	FIMD1,	LCD1_M1);
+SYSMMU_RESOURCE_DEFINE(EXYNOS4, flite0,	FIMC_LITE0, FIMC_LITE0);
+SYSMMU_RESOURCE_DEFINE(EXYNOS4, flite1,	FIMC_LITE1, FIMC_LITE1);
+SYSMMU_RESOURCE_DEFINE(EXYNOS4, mfc_r,	MFC_R,	MFC_M0);
+SYSMMU_RESOURCE_DEFINE(EXYNOS4, mfc_l,	MFC_L,	MFC_M1);
+SYSMMU_RESOURCE(EXYNOS4, isp) {
+	DEFINE_SYSMMU_RESOURCE(EXYNOS4, FIMC_ISP, FIMC_ISP),
+	DEFINE_SYSMMU_RESOURCE(EXYNOS4, FIMC_DRC, FIMC_DRC),
+	DEFINE_SYSMMU_RESOURCE(EXYNOS4, FIMC_FD, FIMC_FD),
+	DEFINE_SYSMMU_RESOURCE(EXYNOS4, ISPCPU, FIMC_CX),
+};
+
+static struct sysmmu_resource_map sysmmu_resmap4[] __initdata = {
+	SYSMMU_RESOURCE_MAPPING_PD(4, fimc0,	fimc0,	PD_CAM),
+	SYSMMU_RESOURCE_MAPPING_PD(4, fimc1,	fimc1,	PD_CAM),
+	SYSMMU_RESOURCE_MAPPING_PD(4, fimc2,	fimc2,	PD_CAM),
+	SYSMMU_RESOURCE_MAPPING_PD(4, fimc3,	fimc3,	PD_CAM),
+	SYSMMU_RESOURCE_MAPPING_PD(4, tv,	tv,	PD_TV),
+	SYSMMU_RESOURCE_MAPPING_PD(4, mfc_r,	mfc_r,	PD_MFC),
+	SYSMMU_RESOURCE_MAPPING_PD(4, mfc_l,	mfc_l,	PD_MFC),
+	SYSMMU_RESOURCE_MAPPING_PD(4, rot,	rot,	PD_LCD0),
+	SYSMMU_RESOURCE_MAPPING_PD(4, jpeg,	jpeg,	PD_CAM),
+	SYSMMU_RESOURCE_MAPPING_PD(4, fimd0,	fimd0,	PD_LCD0),
+};
+
+static struct sysmmu_resource_map sysmmu_resmap4210[] __initdata = {
+	SYSMMU_RESOURCE_MAPPING_PD(4, 2d,	2d,	PD_LCD0),
+	SYSMMU_RESOURCE_MAPPING_PD(4, fimd1,	fimd1,	PD_LCD1),
+};
+
+static struct sysmmu_resource_map sysmmu_resmap4212[] __initdata = {
+	SYSMMU_RESOURCE_MAPPING(4,	2d,	2d_acp),
+	SYSMMU_RESOURCE_MAPPING_PD(4,	camif0, flite0,	PD_ISP),
+	SYSMMU_RESOURCE_MAPPING_PD(4,	camif1, flite1,	PD_ISP),
+	SYSMMU_RESOURCE_MAPPING_PD(4,	isp,	isp,	PD_ISP),
+};
+#endif /* CONFIG_ARCH_EXYNOS4 */
 
-void sysmmu_clk_disable(sysmmu_ips ips)
+#ifdef CONFIG_ARCH_EXYNOS5
+SYSMMU_RESOURCE_DEFINE(EXYNOS5, jpeg,	JPEG,	JPEG);
+SYSMMU_RESOURCE_DEFINE(EXYNOS5, fimd1,	FIMD1,	FIMD1);
+SYSMMU_RESOURCE_DEFINE(EXYNOS5, 2d,	2D,	2D);
+SYSMMU_RESOURCE_DEFINE(EXYNOS5, rot,	ROTATOR, ROTATOR);
+SYSMMU_RESOURCE_DEFINE(EXYNOS5, tv,	TV,	TV);
+SYSMMU_RESOURCE_DEFINE(EXYNOS5, flite0,	LITE0,	LITE0);
+SYSMMU_RESOURCE_DEFINE(EXYNOS5, flite1,	LITE1,	LITE1);
+SYSMMU_RESOURCE_DEFINE(EXYNOS5, gsc0,	GSC0,	GSC0);
+SYSMMU_RESOURCE_DEFINE(EXYNOS5, gsc1,	GSC1,	GSC1);
+SYSMMU_RESOURCE_DEFINE(EXYNOS5, gsc2,	GSC2,	GSC2);
+SYSMMU_RESOURCE_DEFINE(EXYNOS5, gsc3,	GSC3,	GSC3);
+SYSMMU_RESOURCE_DEFINE(EXYNOS5, mfc_r,	MFC_R,	MFC_R);
+SYSMMU_RESOURCE_DEFINE(EXYNOS5, mfc_l,	MFC_L,	MFC_L);
+SYSMMU_RESOURCE(EXYNOS5, isp) {
+	DEFINE_SYSMMU_RESOURCE(EXYNOS5, ISP, ISP),
+	DEFINE_SYSMMU_RESOURCE(EXYNOS5, DRC, DRC),
+	DEFINE_SYSMMU_RESOURCE(EXYNOS5, FD, FD),
+	DEFINE_SYSMMU_RESOURCE(EXYNOS5, ISPCPU, MCUISP),
+	DEFINE_SYSMMU_RESOURCE(EXYNOS5, SCALERC, SCALERCISP),
+	DEFINE_SYSMMU_RESOURCE(EXYNOS5, SCALERP, SCALERPISP),
+	DEFINE_SYSMMU_RESOURCE(EXYNOS5,	ODC, ODC),
+	DEFINE_SYSMMU_RESOURCE(EXYNOS5, DIS0, DIS0),
+	DEFINE_SYSMMU_RESOURCE(EXYNOS5, DIS1, DIS1),
+	DEFINE_SYSMMU_RESOURCE(EXYNOS5, 3DNR, 3DNR),
+};
+
+static struct sysmmu_resource_map sysmmu_resmap5[] __initdata = {
+	SYSMMU_RESOURCE_MAPPING(5,	jpeg,	jpeg),
+	SYSMMU_RESOURCE_MAPPING(5,	fimd1,	fimd1),
+	SYSMMU_RESOURCE_MAPPING(5,	2d,	2d),
+	SYSMMU_RESOURCE_MAPPING(5,	rot,	rot),
+	SYSMMU_RESOURCE_MAPPING_PD(5,	tv,	tv,	PD_DISP1),
+	SYSMMU_RESOURCE_MAPPING_PD(5,	camif0,	flite0,	PD_GSCL),
+	SYSMMU_RESOURCE_MAPPING_PD(5,	camif1,	flite1,	PD_GSCL),
+	SYSMMU_RESOURCE_MAPPING_PD(5,	gsc0,	gsc0,	PD_GSCL),
+	SYSMMU_RESOURCE_MAPPING_PD(5,	gsc1,	gsc1,	PD_GSCL),
+	SYSMMU_RESOURCE_MAPPING_PD(5,	gsc2,	gsc2,	PD_GSCL),
+	SYSMMU_RESOURCE_MAPPING_PD(5,	gsc3,	gsc3,	PD_GSCL),
+	SYSMMU_RESOURCE_MAPPING_PD(5,	mfc_r,	mfc_r,	PD_MFC),
+	SYSMMU_RESOURCE_MAPPING_PD(5,	mfc_l,	mfc_l,	PD_MFC),
+	SYSMMU_RESOURCE_MAPPING_MCPD(5,	isp,	isp,	PD_ISP, mc_platdata),
+};
+#endif /* CONFIG_ARCH_EXYNOS5 */
+
+static int __init init_sysmmu_platform_device(void)
 {
-	if (sysmmu_clk[ips])
-		clk_disable(sysmmu_clk[ips]);
+	int i, j;
+	struct sysmmu_resource_map *resmap[2] = {NULL, NULL};
+	int nmap[2] = {0, 0};
+
+#ifdef CONFIG_ARCH_EXYNOS5
+	if (soc_is_exynos5250()) {
+		resmap[0] = sysmmu_resmap5;
+		nmap[0] = ARRAY_SIZE(sysmmu_resmap5);
+		nmap[1] = 0;
+	}
+#endif
+
+#ifdef CONFIG_ARCH_EXYNOS4
+	if (resmap[0] == NULL) {
+		resmap[0] = sysmmu_resmap4;
+		nmap[0] = ARRAY_SIZE(sysmmu_resmap4);
+	}
+
+	if (soc_is_exynos4210()) {
+		resmap[1] = sysmmu_resmap4210;
+		nmap[1] = ARRAY_SIZE(sysmmu_resmap4210);
+	}
+
+	if (soc_is_exynos4412() || soc_is_exynos4212()) {
+		resmap[1] = sysmmu_resmap4212;
+		nmap[1] = ARRAY_SIZE(sysmmu_resmap4212);
+	}
+#endif
+
+	for (j = 0; j < 2; j++) {
+		for (i = 0; i < nmap[j]; i++) {
+			struct sysmmu_resource_map *map;
+			struct sysmmu_platform_data *platdata;
+
+			map = &resmap[j][i];
+
+			map->pdev->dev.parent = map->pdd;
+
+			platdata = map->pdev->dev.platform_data;
+			platdata->clockname = map->clocknames;
+
+			if (platform_device_add_resources(map->pdev, map->res,
+								map->rnum)) {
+				pr_err("%s: Failed to add device resources for "
+						"%s.%d\n", __func__,
+						map->pdev->name, map->pdev->id);
+				continue;
+			}
+
+			if (platform_device_register(map->pdev)) {
+				pr_err("%s: Failed to register %s.%d\n",
+					__func__, map->pdev->name,
+						map->pdev->id);
+			}
+		}
+	}
+
+	return 0;
 }
+arch_initcall(init_sysmmu_platform_device);
diff --git a/arch/arm/mach-exynos/dma.c b/arch/arm/mach-exynos/dma.c
index 3983abee4264..f60b66dbcf84 100644
--- a/arch/arm/mach-exynos/dma.c
+++ b/arch/arm/mach-exynos/dma.c
@@ -35,8 +35,6 @@
 #include <mach/irqs.h>
 #include <mach/dma.h>
 
-static u64 dma_dmamask = DMA_BIT_MASK(32);
-
 static u8 exynos4210_pdma0_peri[] = {
 	DMACH_PCM0_RX,
 	DMACH_PCM0_TX,
@@ -105,10 +103,45 @@ static u8 exynos4212_pdma0_peri[] = {
 	DMACH_MIPI_HSI5,
 };
 
-struct dma_pl330_platdata exynos4_pdma0_pdata;
+static u8 exynos5250_pdma0_peri[] = {
+	DMACH_PCM0_RX,
+	DMACH_PCM0_TX,
+	DMACH_PCM2_RX,
+	DMACH_PCM2_TX,
+	DMACH_SPI0_RX,
+	DMACH_SPI0_TX,
+	DMACH_SPI2_RX,
+	DMACH_SPI2_TX,
+	DMACH_I2S0S_TX,
+	DMACH_I2S0_RX,
+	DMACH_I2S0_TX,
+	DMACH_I2S2_RX,
+	DMACH_I2S2_TX,
+	DMACH_UART0_RX,
+	DMACH_UART0_TX,
+	DMACH_UART2_RX,
+	DMACH_UART2_TX,
+	DMACH_UART4_RX,
+	DMACH_UART4_TX,
+	DMACH_SLIMBUS0_RX,
+	DMACH_SLIMBUS0_TX,
+	DMACH_SLIMBUS2_RX,
+	DMACH_SLIMBUS2_TX,
+	DMACH_SLIMBUS4_RX,
+	DMACH_SLIMBUS4_TX,
+	DMACH_AC97_MICIN,
+	DMACH_AC97_PCMIN,
+	DMACH_AC97_PCMOUT,
+	DMACH_MIPI_HSI0,
+	DMACH_MIPI_HSI2,
+	DMACH_MIPI_HSI4,
+	DMACH_MIPI_HSI6,
+};
+
+static struct dma_pl330_platdata exynos_pdma0_pdata;
 
-static AMBA_AHB_DEVICE(exynos4_pdma0, "dma-pl330.0", 0x00041330,
-	EXYNOS4_PA_PDMA0, {EXYNOS4_IRQ_PDMA0}, &exynos4_pdma0_pdata);
+static AMBA_AHB_DEVICE(exynos_pdma0, "dma-pl330.0", 0x00041330,
+	EXYNOS4_PA_PDMA0, {EXYNOS4_IRQ_PDMA0}, &exynos_pdma0_pdata);
 
 static u8 exynos4210_pdma1_peri[] = {
 	DMACH_PCM0_RX,
@@ -171,10 +204,45 @@ static u8 exynos4212_pdma1_peri[] = {
 	DMACH_MIPI_HSI7,
 };
 
-static struct dma_pl330_platdata exynos4_pdma1_pdata;
+static u8 exynos5250_pdma1_peri[] = {
+	DMACH_PCM0_RX,
+	DMACH_PCM0_TX,
+	DMACH_PCM1_RX,
+	DMACH_PCM1_TX,
+	DMACH_SPI1_RX,
+	DMACH_SPI1_TX,
+	DMACH_PWM,
+	DMACH_SPDIF,
+	DMACH_I2S0S_TX,
+	DMACH_I2S0_RX,
+	DMACH_I2S0_TX,
+	DMACH_I2S1_RX,
+	DMACH_I2S1_TX,
+	DMACH_UART0_RX,
+	DMACH_UART0_TX,
+	DMACH_UART1_RX,
+	DMACH_UART1_TX,
+	DMACH_UART3_RX,
+	DMACH_UART3_TX,
+	DMACH_SLIMBUS1_RX,
+	DMACH_SLIMBUS1_TX,
+	DMACH_SLIMBUS3_RX,
+	DMACH_SLIMBUS3_TX,
+	DMACH_SLIMBUS5_RX,
+	DMACH_SLIMBUS5_TX,
+	DMACH_SLIMBUS0AUX_RX,
+	DMACH_SLIMBUS0AUX_TX,
+	DMACH_DISP1,
+	DMACH_MIPI_HSI1,
+	DMACH_MIPI_HSI3,
+	DMACH_MIPI_HSI5,
+	DMACH_MIPI_HSI7,
+};
+
+static struct dma_pl330_platdata exynos_pdma1_pdata;
 
-static AMBA_AHB_DEVICE(exynos4_pdma1,  "dma-pl330.1", 0x00041330,
-	EXYNOS4_PA_PDMA1, {EXYNOS4_IRQ_PDMA1}, &exynos4_pdma1_pdata);
+static AMBA_AHB_DEVICE(exynos_pdma1,  "dma-pl330.1", 0x00041330,
+	EXYNOS4_PA_PDMA1, {EXYNOS4_IRQ_PDMA1}, &exynos_pdma1_pdata);
 
 static u8 mdma_peri[] = {
 	DMACH_MTOM_0,
@@ -187,46 +255,63 @@ static u8 mdma_peri[] = {
 	DMACH_MTOM_7,
 };
 
-static struct dma_pl330_platdata exynos4_mdma1_pdata = {
+static struct dma_pl330_platdata exynos_mdma1_pdata = {
 	.nr_valid_peri = ARRAY_SIZE(mdma_peri),
 	.peri_id = mdma_peri,
 };
 
-static AMBA_AHB_DEVICE(exynos4_mdma1,  "dma-pl330.2", 0x00041330,
-	EXYNOS4_PA_MDMA1, {EXYNOS4_IRQ_MDMA1}, &exynos4_mdma1_pdata);
+static AMBA_AHB_DEVICE(exynos_mdma1,  "dma-pl330.2", 0x00041330,
+	EXYNOS4_PA_MDMA1, {EXYNOS4_IRQ_MDMA1}, &exynos_mdma1_pdata);
 
-static int __init exynos4_dma_init(void)
+static int __init exynos_dma_init(void)
 {
 	if (of_have_populated_dt())
 		return 0;
 
 	if (soc_is_exynos4210()) {
-		exynos4_pdma0_pdata.nr_valid_peri =
+		exynos_pdma0_pdata.nr_valid_peri =
 			ARRAY_SIZE(exynos4210_pdma0_peri);
-		exynos4_pdma0_pdata.peri_id = exynos4210_pdma0_peri;
-		exynos4_pdma1_pdata.nr_valid_peri =
+		exynos_pdma0_pdata.peri_id = exynos4210_pdma0_peri;
+		exynos_pdma1_pdata.nr_valid_peri =
 			ARRAY_SIZE(exynos4210_pdma1_peri);
-		exynos4_pdma1_pdata.peri_id = exynos4210_pdma1_peri;
+		exynos_pdma1_pdata.peri_id = exynos4210_pdma1_peri;
 	} else if (soc_is_exynos4212() || soc_is_exynos4412()) {
-		exynos4_pdma0_pdata.nr_valid_peri =
+		exynos_pdma0_pdata.nr_valid_peri =
 			ARRAY_SIZE(exynos4212_pdma0_peri);
-		exynos4_pdma0_pdata.peri_id = exynos4212_pdma0_peri;
-		exynos4_pdma1_pdata.nr_valid_peri =
+		exynos_pdma0_pdata.peri_id = exynos4212_pdma0_peri;
+		exynos_pdma1_pdata.nr_valid_peri =
 			ARRAY_SIZE(exynos4212_pdma1_peri);
-		exynos4_pdma1_pdata.peri_id = exynos4212_pdma1_peri;
+		exynos_pdma1_pdata.peri_id = exynos4212_pdma1_peri;
+	} else if (soc_is_exynos5250()) {
+		exynos_pdma0_pdata.nr_valid_peri =
+			ARRAY_SIZE(exynos5250_pdma0_peri);
+		exynos_pdma0_pdata.peri_id = exynos5250_pdma0_peri;
+		exynos_pdma1_pdata.nr_valid_peri =
+			ARRAY_SIZE(exynos5250_pdma1_peri);
+		exynos_pdma1_pdata.peri_id = exynos5250_pdma1_peri;
+
+		exynos_pdma0_device.res.start = EXYNOS5_PA_PDMA0;
+		exynos_pdma0_device.res.end = EXYNOS5_PA_PDMA0 + SZ_4K;
+		exynos_pdma0_device.irq[0] = EXYNOS5_IRQ_PDMA0;
+		exynos_pdma1_device.res.start = EXYNOS5_PA_PDMA1;
+		exynos_pdma1_device.res.end = EXYNOS5_PA_PDMA1 + SZ_4K;
+		exynos_pdma0_device.irq[0] = EXYNOS5_IRQ_PDMA1;
+		exynos_mdma1_device.res.start = EXYNOS5_PA_MDMA1;
+		exynos_mdma1_device.res.end = EXYNOS5_PA_MDMA1 + SZ_4K;
+		exynos_pdma0_device.irq[0] = EXYNOS5_IRQ_MDMA1;
 	}
 
-	dma_cap_set(DMA_SLAVE, exynos4_pdma0_pdata.cap_mask);
-	dma_cap_set(DMA_CYCLIC, exynos4_pdma0_pdata.cap_mask);
-	amba_device_register(&exynos4_pdma0_device, &iomem_resource);
+	dma_cap_set(DMA_SLAVE, exynos_pdma0_pdata.cap_mask);
+	dma_cap_set(DMA_CYCLIC, exynos_pdma0_pdata.cap_mask);
+	amba_device_register(&exynos_pdma0_device, &iomem_resource);
 
-	dma_cap_set(DMA_SLAVE, exynos4_pdma1_pdata.cap_mask);
-	dma_cap_set(DMA_CYCLIC, exynos4_pdma1_pdata.cap_mask);
-	amba_device_register(&exynos4_pdma1_device, &iomem_resource);
+	dma_cap_set(DMA_SLAVE, exynos_pdma1_pdata.cap_mask);
+	dma_cap_set(DMA_CYCLIC, exynos_pdma1_pdata.cap_mask);
+	amba_device_register(&exynos_pdma1_device, &iomem_resource);
 
-	dma_cap_set(DMA_MEMCPY, exynos4_mdma1_pdata.cap_mask);
-	amba_device_register(&exynos4_mdma1_device, &iomem_resource);
+	dma_cap_set(DMA_MEMCPY, exynos_mdma1_pdata.cap_mask);
+	amba_device_register(&exynos_mdma1_device, &iomem_resource);
 
 	return 0;
 }
-arch_initcall(exynos4_dma_init);
+arch_initcall(exynos_dma_init);
diff --git a/arch/arm/mach-exynos/include/mach/debug-macro.S b/arch/arm/mach-exynos/include/mach/debug-macro.S
index 6c857ff0b5d8..e0c86ea475e7 100644
--- a/arch/arm/mach-exynos/include/mach/debug-macro.S
+++ b/arch/arm/mach-exynos/include/mach/debug-macro.S
@@ -21,10 +21,9 @@
 	 */
 
 	.macro addruart, rp, rv, tmp
-		mov	\rp, #0x10000000
-		ldr	\rp, [\rp, #0x0]
-		and	\rp, \rp, #0xf00000
-		teq	\rp, #0x500000		@@ EXYNOS5
+		mrc	p15, 0, \tmp, c0, c0, 0
+		and	\tmp, \tmp, #0xf0
+		teq	\tmp, #0xf0		@@ A15
 		ldreq	\rp, =EXYNOS5_PA_UART
 		movne	\rp, #EXYNOS4_PA_UART	@@ EXYNOS4
 		ldr	\rv, =S3C_VA_UART
diff --git a/arch/arm/mach-exynos/include/mach/gpio.h b/arch/arm/mach-exynos/include/mach/gpio.h
index d7498afe036a..eb24f1eb8e3b 100644
--- a/arch/arm/mach-exynos/include/mach/gpio.h
+++ b/arch/arm/mach-exynos/include/mach/gpio.h
@@ -153,10 +153,11 @@ enum exynos4_gpio_number {
 #define EXYNOS5_GPIO_B2_NR	(4)
 #define EXYNOS5_GPIO_B3_NR	(4)
 #define EXYNOS5_GPIO_C0_NR	(7)
-#define EXYNOS5_GPIO_C1_NR	(7)
+#define EXYNOS5_GPIO_C1_NR	(4)
 #define EXYNOS5_GPIO_C2_NR	(7)
 #define EXYNOS5_GPIO_C3_NR	(7)
-#define EXYNOS5_GPIO_D0_NR	(8)
+#define EXYNOS5_GPIO_C4_NR	(7)
+#define EXYNOS5_GPIO_D0_NR	(4)
 #define EXYNOS5_GPIO_D1_NR	(8)
 #define EXYNOS5_GPIO_Y0_NR	(6)
 #define EXYNOS5_GPIO_Y1_NR	(4)
@@ -199,7 +200,8 @@ enum exynos5_gpio_number {
 	EXYNOS5_GPIO_C1_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C0),
 	EXYNOS5_GPIO_C2_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C1),
 	EXYNOS5_GPIO_C3_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C2),
-	EXYNOS5_GPIO_D0_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C3),
+	EXYNOS5_GPIO_C4_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C3),
+	EXYNOS5_GPIO_D0_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C4),
 	EXYNOS5_GPIO_D1_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_D0),
 	EXYNOS5_GPIO_Y0_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_D1),
 	EXYNOS5_GPIO_Y1_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_Y0),
@@ -242,6 +244,7 @@ enum exynos5_gpio_number {
 #define EXYNOS5_GPC1(_nr)	(EXYNOS5_GPIO_C1_START + (_nr))
 #define EXYNOS5_GPC2(_nr)	(EXYNOS5_GPIO_C2_START + (_nr))
 #define EXYNOS5_GPC3(_nr)	(EXYNOS5_GPIO_C3_START + (_nr))
+#define EXYNOS5_GPC4(_nr)	(EXYNOS5_GPIO_C4_START + (_nr))
 #define EXYNOS5_GPD0(_nr)	(EXYNOS5_GPIO_D0_START + (_nr))
 #define EXYNOS5_GPD1(_nr)	(EXYNOS5_GPIO_D1_START + (_nr))
 #define EXYNOS5_GPY0(_nr)	(EXYNOS5_GPIO_Y0_START + (_nr))
diff --git a/arch/arm/mach-exynos/include/mach/irqs.h b/arch/arm/mach-exynos/include/mach/irqs.h
index 9bee8535d9e0..7a4b4789eb72 100644
--- a/arch/arm/mach-exynos/include/mach/irqs.h
+++ b/arch/arm/mach-exynos/include/mach/irqs.h
@@ -154,6 +154,13 @@
 #define EXYNOS4_IRQ_SYSMMU_MFC_M1_0	COMBINER_IRQ(5, 6)
 #define EXYNOS4_IRQ_SYSMMU_PCIE_0	COMBINER_IRQ(5, 7)
 
+#define EXYNOS4_IRQ_SYSMMU_FIMC_LITE0_0	COMBINER_IRQ(16, 0)
+#define EXYNOS4_IRQ_SYSMMU_FIMC_LITE1_0	COMBINER_IRQ(16, 1)
+#define EXYNOS4_IRQ_SYSMMU_FIMC_ISP_0	COMBINER_IRQ(16, 2)
+#define EXYNOS4_IRQ_SYSMMU_FIMC_DRC_0	COMBINER_IRQ(16, 3)
+#define EXYNOS4_IRQ_SYSMMU_FIMC_FD_0	COMBINER_IRQ(16, 4)
+#define EXYNOS4_IRQ_SYSMMU_FIMC_CX_0	COMBINER_IRQ(16, 5)
+
 #define EXYNOS4_IRQ_FIMD0_FIFO		COMBINER_IRQ(11, 0)
 #define EXYNOS4_IRQ_FIMD0_VSYNC		COMBINER_IRQ(11, 1)
 #define EXYNOS4_IRQ_FIMD0_SYSTEM	COMBINER_IRQ(11, 2)
@@ -189,6 +196,7 @@
 #define IRQ_IIC7			EXYNOS4_IRQ_IIC7
 
 #define IRQ_USB_HOST			EXYNOS4_IRQ_USB_HOST
+#define IRQ_OTG				EXYNOS4_IRQ_USB_HSOTG
 
 #define IRQ_HSMMC0			EXYNOS4_IRQ_HSMMC0
 #define IRQ_HSMMC1			EXYNOS4_IRQ_HSMMC1
@@ -212,30 +220,14 @@
 #define IRQ_MFC				EXYNOS4_IRQ_MFC
 #define IRQ_SDO				EXYNOS4_IRQ_SDO
 
+#define IRQ_I2S0			EXYNOS4_IRQ_I2S0
+
 #define IRQ_ADC				EXYNOS4_IRQ_ADC0
 #define IRQ_TC				EXYNOS4_IRQ_PEN0
 
 #define IRQ_KEYPAD			EXYNOS4_IRQ_KEYPAD
 #define IRQ_PMU				EXYNOS4_IRQ_PMU
 
-#define IRQ_SYSMMU_MDMA0_0		EXYNOS4_IRQ_SYSMMU_MDMA0_0
-#define IRQ_SYSMMU_SSS_0                EXYNOS4_IRQ_SYSMMU_SSS_0
-#define IRQ_SYSMMU_FIMC0_0              EXYNOS4_IRQ_SYSMMU_FIMC0_0
-#define IRQ_SYSMMU_FIMC1_0              EXYNOS4_IRQ_SYSMMU_FIMC1_0
-#define IRQ_SYSMMU_FIMC2_0              EXYNOS4_IRQ_SYSMMU_FIMC2_0
-#define IRQ_SYSMMU_FIMC3_0              EXYNOS4_IRQ_SYSMMU_FIMC3_0
-#define IRQ_SYSMMU_JPEG_0               EXYNOS4_IRQ_SYSMMU_JPEG_0
-#define IRQ_SYSMMU_2D_0                 EXYNOS4_IRQ_SYSMMU_2D_0
-
-#define IRQ_SYSMMU_ROTATOR_0            EXYNOS4_IRQ_SYSMMU_ROTATOR_0
-#define IRQ_SYSMMU_MDMA1_0              EXYNOS4_IRQ_SYSMMU_MDMA1_0
-#define IRQ_SYSMMU_LCD0_M0_0            EXYNOS4_IRQ_SYSMMU_LCD0_M0_0
-#define IRQ_SYSMMU_LCD1_M1_0            EXYNOS4_IRQ_SYSMMU_LCD1_M1_0
-#define IRQ_SYSMMU_TV_M0_0              EXYNOS4_IRQ_SYSMMU_TV_M0_0
-#define IRQ_SYSMMU_MFC_M0_0             EXYNOS4_IRQ_SYSMMU_MFC_M0_0
-#define IRQ_SYSMMU_MFC_M1_0             EXYNOS4_IRQ_SYSMMU_MFC_M1_0
-#define IRQ_SYSMMU_PCIE_0               EXYNOS4_IRQ_SYSMMU_PCIE_0
-
 #define IRQ_FIMD0_FIFO			EXYNOS4_IRQ_FIMD0_FIFO
 #define IRQ_FIMD0_VSYNC			EXYNOS4_IRQ_FIMD0_VSYNC
 #define IRQ_FIMD0_SYSTEM		EXYNOS4_IRQ_FIMD0_SYSTEM
@@ -295,6 +287,7 @@
 #define EXYNOS5_IRQ_MIPICSI1		IRQ_SPI(80)
 #define EXYNOS5_IRQ_EFNFCON_DMA_ABORT	IRQ_SPI(81)
 #define EXYNOS5_IRQ_MIPIDSI0		IRQ_SPI(82)
+#define EXYNOS5_IRQ_WDT_IOP		IRQ_SPI(83)
 #define EXYNOS5_IRQ_ROTATOR		IRQ_SPI(84)
 #define EXYNOS5_IRQ_GSC0		IRQ_SPI(85)
 #define EXYNOS5_IRQ_GSC1		IRQ_SPI(86)
@@ -303,8 +296,8 @@
 #define EXYNOS5_IRQ_JPEG		IRQ_SPI(89)
 #define EXYNOS5_IRQ_EFNFCON_DMA		IRQ_SPI(90)
 #define EXYNOS5_IRQ_2D			IRQ_SPI(91)
-#define EXYNOS5_IRQ_SFMC0		IRQ_SPI(92)
-#define EXYNOS5_IRQ_SFMC1		IRQ_SPI(93)
+#define EXYNOS5_IRQ_EFNFCON_0		IRQ_SPI(92)
+#define EXYNOS5_IRQ_EFNFCON_1		IRQ_SPI(93)
 #define EXYNOS5_IRQ_MIXER		IRQ_SPI(94)
 #define EXYNOS5_IRQ_HDMI		IRQ_SPI(95)
 #define EXYNOS5_IRQ_MFC			IRQ_SPI(96)
@@ -318,7 +311,7 @@
 #define EXYNOS5_IRQ_PCM2		IRQ_SPI(104)
 #define EXYNOS5_IRQ_SPDIF		IRQ_SPI(105)
 #define EXYNOS5_IRQ_ADC0		IRQ_SPI(106)
-
+#define EXYNOS5_IRQ_ADC1		IRQ_SPI(107)
 #define EXYNOS5_IRQ_SATA_PHY		IRQ_SPI(108)
 #define EXYNOS5_IRQ_SATA_PMEMREQ	IRQ_SPI(109)
 #define EXYNOS5_IRQ_CAM_C		IRQ_SPI(110)
@@ -327,8 +320,9 @@
 #define EXYNOS5_IRQ_DP1_INTP1		IRQ_SPI(113)
 #define EXYNOS5_IRQ_CEC			IRQ_SPI(114)
 #define EXYNOS5_IRQ_SATA		IRQ_SPI(115)
-#define EXYNOS5_IRQ_NFCON		IRQ_SPI(116)
 
+#define EXYNOS5_IRQ_MCT_L0		IRQ_SPI(120)
+#define EXYNOS5_IRQ_MCT_L1		IRQ_SPI(121)
 #define EXYNOS5_IRQ_MMC44		IRQ_SPI(123)
 #define EXYNOS5_IRQ_MDMA1		IRQ_SPI(124)
 #define EXYNOS5_IRQ_FIMC_LITE0		IRQ_SPI(125)
@@ -336,7 +330,6 @@
 #define EXYNOS5_IRQ_RP_TIMER		IRQ_SPI(127)
 
 #define EXYNOS5_IRQ_PMU			COMBINER_IRQ(1, 2)
-#define EXYNOS5_IRQ_PMU_CPU1		COMBINER_IRQ(1, 6)
 
 #define EXYNOS5_IRQ_SYSMMU_GSC0_0	COMBINER_IRQ(2, 0)
 #define EXYNOS5_IRQ_SYSMMU_GSC0_1	COMBINER_IRQ(2, 1)
@@ -347,6 +340,8 @@
 #define EXYNOS5_IRQ_SYSMMU_GSC3_0	COMBINER_IRQ(2, 6)
 #define EXYNOS5_IRQ_SYSMMU_GSC3_1	COMBINER_IRQ(2, 7)
 
+#define EXYNOS5_IRQ_SYSMMU_LITE2_0	COMBINER_IRQ(3, 0)
+#define EXYNOS5_IRQ_SYSMMU_LITE2_1	COMBINER_IRQ(3, 1)
 #define EXYNOS5_IRQ_SYSMMU_FIMD1_0	COMBINER_IRQ(3, 2)
 #define EXYNOS5_IRQ_SYSMMU_FIMD1_1	COMBINER_IRQ(3, 3)
 #define EXYNOS5_IRQ_SYSMMU_LITE0_0	COMBINER_IRQ(3, 4)
@@ -370,8 +365,8 @@
 
 #define EXYNOS5_IRQ_SYSMMU_ARM_0	COMBINER_IRQ(6, 0)
 #define EXYNOS5_IRQ_SYSMMU_ARM_1	COMBINER_IRQ(6, 1)
-#define EXYNOS5_IRQ_SYSMMU_MFC_L_0	COMBINER_IRQ(6, 2)
-#define EXYNOS5_IRQ_SYSMMU_MFC_L_1	COMBINER_IRQ(6, 3)
+#define EXYNOS5_IRQ_SYSMMU_MFC_R_0	COMBINER_IRQ(6, 2)
+#define EXYNOS5_IRQ_SYSMMU_MFC_R_1	COMBINER_IRQ(6, 3)
 #define EXYNOS5_IRQ_SYSMMU_RTIC_0	COMBINER_IRQ(6, 4)
 #define EXYNOS5_IRQ_SYSMMU_RTIC_1	COMBINER_IRQ(6, 5)
 #define EXYNOS5_IRQ_SYSMMU_SSS_0	COMBINER_IRQ(6, 6)
@@ -383,11 +378,9 @@
 #define EXYNOS5_IRQ_SYSMMU_MDMA1_1	COMBINER_IRQ(7, 3)
 #define EXYNOS5_IRQ_SYSMMU_TV_0		COMBINER_IRQ(7, 4)
 #define EXYNOS5_IRQ_SYSMMU_TV_1		COMBINER_IRQ(7, 5)
-#define EXYNOS5_IRQ_SYSMMU_GPSX_0	COMBINER_IRQ(7, 6)
-#define EXYNOS5_IRQ_SYSMMU_GPSX_1	COMBINER_IRQ(7, 7)
 
-#define EXYNOS5_IRQ_SYSMMU_MFC_R_0	COMBINER_IRQ(8, 5)
-#define EXYNOS5_IRQ_SYSMMU_MFC_R_1	COMBINER_IRQ(8, 6)
+#define EXYNOS5_IRQ_SYSMMU_MFC_L_0	COMBINER_IRQ(8, 5)
+#define EXYNOS5_IRQ_SYSMMU_MFC_L_1	COMBINER_IRQ(8, 6)
 
 #define EXYNOS5_IRQ_SYSMMU_DIS1_0	COMBINER_IRQ(9, 4)
 #define EXYNOS5_IRQ_SYSMMU_DIS1_1	COMBINER_IRQ(9, 5)
@@ -403,17 +396,24 @@
 #define EXYNOS5_IRQ_SYSMMU_DRC_0	COMBINER_IRQ(11, 6)
 #define EXYNOS5_IRQ_SYSMMU_DRC_1	COMBINER_IRQ(11, 7)
 
+#define EXYNOS5_IRQ_MDMA1_ABORT		COMBINER_IRQ(13, 1)
+
+#define EXYNOS5_IRQ_MDMA0_ABORT		COMBINER_IRQ(15, 3)
+
 #define EXYNOS5_IRQ_FIMD1_FIFO		COMBINER_IRQ(18, 4)
 #define EXYNOS5_IRQ_FIMD1_VSYNC		COMBINER_IRQ(18, 5)
 #define EXYNOS5_IRQ_FIMD1_SYSTEM	COMBINER_IRQ(18, 6)
 
+#define EXYNOS5_IRQ_ARMIOP_GIC		COMBINER_IRQ(19, 0)
+#define EXYNOS5_IRQ_ARMISP_GIC		COMBINER_IRQ(19, 1)
+#define EXYNOS5_IRQ_IOP_GIC		COMBINER_IRQ(19, 3)
+#define EXYNOS5_IRQ_ISP_GIC		COMBINER_IRQ(19, 4)
+
+#define EXYNOS5_IRQ_PMU_CPU1		COMBINER_IRQ(22, 4)
+
 #define EXYNOS5_IRQ_EINT0		COMBINER_IRQ(23, 0)
-#define EXYNOS5_IRQ_MCT_L0		COMBINER_IRQ(23, 1)
-#define EXYNOS5_IRQ_MCT_L1		COMBINER_IRQ(23, 2)
 #define EXYNOS5_IRQ_MCT_G0		COMBINER_IRQ(23, 3)
 #define EXYNOS5_IRQ_MCT_G1		COMBINER_IRQ(23, 4)
-#define EXYNOS5_IRQ_MCT_G2		COMBINER_IRQ(23, 5)
-#define EXYNOS5_IRQ_MCT_G3		COMBINER_IRQ(23, 6)
 
 #define EXYNOS5_IRQ_EINT1		COMBINER_IRQ(24, 0)
 #define EXYNOS5_IRQ_SYSMMU_LITE1_0	COMBINER_IRQ(24, 1)
@@ -444,7 +444,7 @@
 
 #define EXYNOS5_MAX_COMBINER_NR		32
 
-#define EXYNOS5_IRQ_GPIO1_NR_GROUPS	13
+#define EXYNOS5_IRQ_GPIO1_NR_GROUPS	14
 #define EXYNOS5_IRQ_GPIO2_NR_GROUPS	9
 #define EXYNOS5_IRQ_GPIO3_NR_GROUPS	5
 #define EXYNOS5_IRQ_GPIO4_NR_GROUPS	1
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
index 024d38ff1718..ca4aa89aa46b 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -34,6 +34,9 @@
 
 #define EXYNOS4_PA_JPEG			0x11840000
 
+/* x = 0...1 */
+#define EXYNOS4_PA_FIMC_LITE(x)		(0x12390000 + ((x) * 0x10000))
+
 #define EXYNOS4_PA_G2D			0x12800000
 
 #define EXYNOS4_PA_I2S0			0x03830000
@@ -78,8 +81,8 @@
 
 #define EXYNOS4_PA_GIC_CPU		0x10480000
 #define EXYNOS4_PA_GIC_DIST		0x10490000
-#define EXYNOS5_PA_GIC_CPU		0x10480000
-#define EXYNOS5_PA_GIC_DIST		0x10490000
+#define EXYNOS5_PA_GIC_CPU		0x10482000
+#define EXYNOS5_PA_GIC_DIST		0x10481000
 
 #define EXYNOS4_PA_COREPERI		0x10500000
 #define EXYNOS4_PA_TWD			0x10500600
@@ -89,8 +92,13 @@
 #define EXYNOS4_PA_MDMA1		0x12840000
 #define EXYNOS4_PA_PDMA0		0x12680000
 #define EXYNOS4_PA_PDMA1		0x12690000
+#define EXYNOS5_PA_MDMA0		0x10800000
+#define EXYNOS5_PA_MDMA1		0x11C10000
+#define EXYNOS5_PA_PDMA0		0x121A0000
+#define EXYNOS5_PA_PDMA1		0x121B0000
 
 #define EXYNOS4_PA_SYSMMU_MDMA		0x10A40000
+#define EXYNOS4_PA_SYSMMU_2D_ACP	0x10A40000
 #define EXYNOS4_PA_SYSMMU_SSS		0x10A50000
 #define EXYNOS4_PA_SYSMMU_FIMC0		0x11A20000
 #define EXYNOS4_PA_SYSMMU_FIMC1		0x11A30000
@@ -99,6 +107,12 @@
 #define EXYNOS4_PA_SYSMMU_JPEG		0x11A60000
 #define EXYNOS4_PA_SYSMMU_FIMD0		0x11E20000
 #define EXYNOS4_PA_SYSMMU_FIMD1		0x12220000
+#define EXYNOS4_PA_SYSMMU_FIMC_ISP	0x12260000
+#define EXYNOS4_PA_SYSMMU_FIMC_DRC	0x12270000
+#define EXYNOS4_PA_SYSMMU_FIMC_FD	0x122A0000
+#define EXYNOS4_PA_SYSMMU_ISPCPU	0x122B0000
+#define EXYNOS4_PA_SYSMMU_FIMC_LITE0	0x123B0000
+#define EXYNOS4_PA_SYSMMU_FIMC_LITE1	0x123C0000
 #define EXYNOS4_PA_SYSMMU_PCIe		0x12620000
 #define EXYNOS4_PA_SYSMMU_G2D		0x12A20000
 #define EXYNOS4_PA_SYSMMU_ROTATOR	0x12A30000
@@ -106,6 +120,37 @@
 #define EXYNOS4_PA_SYSMMU_TV		0x12E20000
 #define EXYNOS4_PA_SYSMMU_MFC_L		0x13620000
 #define EXYNOS4_PA_SYSMMU_MFC_R		0x13630000
+
+#define EXYNOS5_PA_SYSMMU_MDMA1		0x10A40000
+#define EXYNOS5_PA_SYSMMU_SSS		0x10A50000
+#define EXYNOS5_PA_SYSMMU_2D		0x10A60000
+#define EXYNOS5_PA_SYSMMU_MFC_L		0x11200000
+#define EXYNOS5_PA_SYSMMU_MFC_R		0x11210000
+#define EXYNOS5_PA_SYSMMU_ROTATOR	0x11D40000
+#define EXYNOS5_PA_SYSMMU_MDMA2		0x11D50000
+#define EXYNOS5_PA_SYSMMU_JPEG		0x11F20000
+#define EXYNOS5_PA_SYSMMU_IOP		0x12360000
+#define EXYNOS5_PA_SYSMMU_RTIC		0x12370000
+#define EXYNOS5_PA_SYSMMU_GPS		0x12630000
+#define EXYNOS5_PA_SYSMMU_ISP		0x13260000
+#define EXYNOS5_PA_SYSMMU_DRC		0x12370000
+#define EXYNOS5_PA_SYSMMU_SCALERC	0x13280000
+#define EXYNOS5_PA_SYSMMU_SCALERP	0x13290000
+#define EXYNOS5_PA_SYSMMU_FD		0x132A0000
+#define EXYNOS5_PA_SYSMMU_ISPCPU	0x132B0000
+#define EXYNOS5_PA_SYSMMU_ODC		0x132C0000
+#define EXYNOS5_PA_SYSMMU_DIS0		0x132D0000
+#define EXYNOS5_PA_SYSMMU_DIS1		0x132E0000
+#define EXYNOS5_PA_SYSMMU_3DNR		0x132F0000
+#define EXYNOS5_PA_SYSMMU_LITE0		0x13C40000
+#define EXYNOS5_PA_SYSMMU_LITE1		0x13C50000
+#define EXYNOS5_PA_SYSMMU_GSC0		0x13E80000
+#define EXYNOS5_PA_SYSMMU_GSC1		0x13E90000
+#define EXYNOS5_PA_SYSMMU_GSC2		0x13EA0000
+#define EXYNOS5_PA_SYSMMU_GSC3		0x13EB0000
+#define EXYNOS5_PA_SYSMMU_FIMD1		0x14640000
+#define EXYNOS5_PA_SYSMMU_TV		0x14650000
+
 #define EXYNOS4_PA_SPI0			0x13920000
 #define EXYNOS4_PA_SPI1			0x13930000
 #define EXYNOS4_PA_SPI2			0x13940000
@@ -126,6 +171,9 @@
 #define EXYNOS4_PA_HSMMC(x)		(0x12510000 + ((x) * 0x10000))
 #define EXYNOS4_PA_DWMCI		0x12550000
 
+#define EXYNOS4_PA_HSOTG		0x12480000
+#define EXYNOS4_PA_USB_HSPHY		0x125B0000
+
 #define EXYNOS4_PA_SATA			0x12560000
 #define EXYNOS4_PA_SATAPHY		0x125D0000
 #define EXYNOS4_PA_SATAPHY_CTRL		0x126B0000
@@ -182,6 +230,7 @@
 #define S3C_PA_SPI0			EXYNOS4_PA_SPI0
 #define S3C_PA_SPI1			EXYNOS4_PA_SPI1
 #define S3C_PA_SPI2			EXYNOS4_PA_SPI2
+#define S3C_PA_USB_HSOTG		EXYNOS4_PA_HSOTG
 
 #define S5P_PA_EHCI			EXYNOS4_PA_EHCI
 #define S5P_PA_FIMC0			EXYNOS4_PA_FIMC0
diff --git a/arch/arm/mach-exynos/include/mach/pm-core.h b/arch/arm/mach-exynos/include/mach/pm-core.h
index 9d8da51e35ca..a67ecfaf1216 100644
--- a/arch/arm/mach-exynos/include/mach/pm-core.h
+++ b/arch/arm/mach-exynos/include/mach/pm-core.h
@@ -33,7 +33,7 @@ static inline void s3c_pm_arch_prepare_irqs(void)
 	__raw_writel(tmp, S5P_WAKEUP_MASK);
 
 	__raw_writel(s3c_irqwake_intmask, S5P_WAKEUP_MASK);
-	__raw_writel(s3c_irqwake_eintmask, S5P_EINT_WAKEUP_MASK);
+	__raw_writel(s3c_irqwake_eintmask & 0xFFFFFFFE, S5P_EINT_WAKEUP_MASK);
 }
 
 static inline void s3c_pm_arch_stop_clocks(void)
diff --git a/arch/arm/mach-exynos/include/mach/pmu.h b/arch/arm/mach-exynos/include/mach/pmu.h
index e76b7faba66b..7c27c2d4bf44 100644
--- a/arch/arm/mach-exynos/include/mach/pmu.h
+++ b/arch/arm/mach-exynos/include/mach/pmu.h
@@ -23,12 +23,12 @@ enum sys_powerdown {
 };
 
 extern unsigned long l2x0_regs_phys;
-struct exynos4_pmu_conf {
+struct exynos_pmu_conf {
 	void __iomem *reg;
 	unsigned int val[NUM_SYS_POWERDOWN];
 };
 
-extern void exynos4_sys_powerdown_conf(enum sys_powerdown mode);
+extern void exynos_sys_powerdown_conf(enum sys_powerdown mode);
 extern void s3c_cpu_resume(void);
 
 #endif /* __ASM_ARCH_PMU_H */
diff --git a/arch/arm/mach-exynos/include/mach/regs-clock.h b/arch/arm/mach-exynos/include/mach/regs-clock.h
index e141c1fd68d8..8c9b38c9c504 100644
--- a/arch/arm/mach-exynos/include/mach/regs-clock.h
+++ b/arch/arm/mach-exynos/include/mach/regs-clock.h
@@ -135,6 +135,9 @@
 #define EXYNOS4_CLKGATE_SCLKCPU			EXYNOS_CLKREG(0x14800)
 #define EXYNOS4_CLKGATE_IP_CPU			EXYNOS_CLKREG(0x14900)
 
+#define EXYNOS4_CLKGATE_IP_ISP0			EXYNOS_CLKREG(0x18800)
+#define EXYNOS4_CLKGATE_IP_ISP1			EXYNOS_CLKREG(0x18804)
+
 #define EXYNOS4_APLL_LOCKTIME			(0x1C20)	/* 300us */
 
 #define EXYNOS4_APLLCON0_ENABLE_SHIFT		(31)
@@ -255,9 +258,15 @@
 
 /* For EXYNOS5250 */
 
+#define EXYNOS5_APLL_LOCK			EXYNOS_CLKREG(0x00000)
 #define EXYNOS5_APLL_CON0			EXYNOS_CLKREG(0x00100)
 #define EXYNOS5_CLKSRC_CPU			EXYNOS_CLKREG(0x00200)
+#define EXYNOS5_CLKMUX_STATCPU			EXYNOS_CLKREG(0x00400)
 #define EXYNOS5_CLKDIV_CPU0			EXYNOS_CLKREG(0x00500)
+#define EXYNOS5_CLKDIV_CPU1			EXYNOS_CLKREG(0x00504)
+#define EXYNOS5_CLKDIV_STATCPU0			EXYNOS_CLKREG(0x00600)
+#define EXYNOS5_CLKDIV_STATCPU1			EXYNOS_CLKREG(0x00604)
+
 #define EXYNOS5_MPLL_CON0			EXYNOS_CLKREG(0x04100)
 #define EXYNOS5_CLKSRC_CORE1			EXYNOS_CLKREG(0x04204)
 
@@ -265,41 +274,59 @@
 
 #define EXYNOS5_CLKDIV_ACP			EXYNOS_CLKREG(0x08500)
 
-#define EXYNOS5_CLKSRC_TOP2			EXYNOS_CLKREG(0x10218)
 #define EXYNOS5_EPLL_CON0			EXYNOS_CLKREG(0x10130)
 #define EXYNOS5_EPLL_CON1			EXYNOS_CLKREG(0x10134)
+#define EXYNOS5_EPLL_CON2			EXYNOS_CLKREG(0x10138)
 #define EXYNOS5_VPLL_CON0			EXYNOS_CLKREG(0x10140)
 #define EXYNOS5_VPLL_CON1			EXYNOS_CLKREG(0x10144)
+#define EXYNOS5_VPLL_CON2			EXYNOS_CLKREG(0x10148)
 #define EXYNOS5_CPLL_CON0			EXYNOS_CLKREG(0x10120)
 
 #define EXYNOS5_CLKSRC_TOP0			EXYNOS_CLKREG(0x10210)
+#define EXYNOS5_CLKSRC_TOP1			EXYNOS_CLKREG(0x10214)
+#define EXYNOS5_CLKSRC_TOP2			EXYNOS_CLKREG(0x10218)
 #define EXYNOS5_CLKSRC_TOP3			EXYNOS_CLKREG(0x1021C)
 #define EXYNOS5_CLKSRC_GSCL			EXYNOS_CLKREG(0x10220)
 #define EXYNOS5_CLKSRC_DISP1_0			EXYNOS_CLKREG(0x1022C)
+#define EXYNOS5_CLKSRC_MAUDIO			EXYNOS_CLKREG(0x10240)
 #define EXYNOS5_CLKSRC_FSYS			EXYNOS_CLKREG(0x10244)
 #define EXYNOS5_CLKSRC_PERIC0			EXYNOS_CLKREG(0x10250)
+#define EXYNOS5_CLKSRC_PERIC1			EXYNOS_CLKREG(0x10254)
+#define EXYNOS5_SCLK_SRC_ISP			EXYNOS_CLKREG(0x10270)
 
 #define EXYNOS5_CLKSRC_MASK_TOP			EXYNOS_CLKREG(0x10310)
 #define EXYNOS5_CLKSRC_MASK_GSCL		EXYNOS_CLKREG(0x10320)
 #define EXYNOS5_CLKSRC_MASK_DISP1_0		EXYNOS_CLKREG(0x1032C)
+#define EXYNOS5_CLKSRC_MASK_MAUDIO		EXYNOS_CLKREG(0x10334)
 #define EXYNOS5_CLKSRC_MASK_FSYS		EXYNOS_CLKREG(0x10340)
 #define EXYNOS5_CLKSRC_MASK_PERIC0		EXYNOS_CLKREG(0x10350)
+#define EXYNOS5_CLKSRC_MASK_PERIC1		EXYNOS_CLKREG(0x10354)
 
 #define EXYNOS5_CLKDIV_TOP0			EXYNOS_CLKREG(0x10510)
 #define EXYNOS5_CLKDIV_TOP1			EXYNOS_CLKREG(0x10514)
 #define EXYNOS5_CLKDIV_GSCL			EXYNOS_CLKREG(0x10520)
 #define EXYNOS5_CLKDIV_DISP1_0			EXYNOS_CLKREG(0x1052C)
 #define EXYNOS5_CLKDIV_GEN			EXYNOS_CLKREG(0x1053C)
+#define EXYNOS5_CLKDIV_MAUDIO			EXYNOS_CLKREG(0x10544)
 #define EXYNOS5_CLKDIV_FSYS0			EXYNOS_CLKREG(0x10548)
 #define EXYNOS5_CLKDIV_FSYS1			EXYNOS_CLKREG(0x1054C)
 #define EXYNOS5_CLKDIV_FSYS2			EXYNOS_CLKREG(0x10550)
 #define EXYNOS5_CLKDIV_FSYS3			EXYNOS_CLKREG(0x10554)
 #define EXYNOS5_CLKDIV_PERIC0			EXYNOS_CLKREG(0x10558)
+#define EXYNOS5_CLKDIV_PERIC1			EXYNOS_CLKREG(0x1055C)
+#define EXYNOS5_CLKDIV_PERIC2			EXYNOS_CLKREG(0x10560)
+#define EXYNOS5_CLKDIV_PERIC3			EXYNOS_CLKREG(0x10564)
+#define EXYNOS5_CLKDIV_PERIC4			EXYNOS_CLKREG(0x10568)
+#define EXYNOS5_CLKDIV_PERIC5			EXYNOS_CLKREG(0x1056C)
+#define EXYNOS5_SCLK_DIV_ISP			EXYNOS_CLKREG(0x10580)
 
 #define EXYNOS5_CLKGATE_IP_ACP			EXYNOS_CLKREG(0x08800)
+#define EXYNOS5_CLKGATE_IP_ISP0			EXYNOS_CLKREG(0x0C800)
+#define EXYNOS5_CLKGATE_IP_ISP1			EXYNOS_CLKREG(0x0C804)
 #define EXYNOS5_CLKGATE_IP_GSCL			EXYNOS_CLKREG(0x10920)
 #define EXYNOS5_CLKGATE_IP_DISP1		EXYNOS_CLKREG(0x10928)
 #define EXYNOS5_CLKGATE_IP_MFC			EXYNOS_CLKREG(0x1092C)
+#define EXYNOS5_CLKGATE_IP_G3D			EXYNOS_CLKREG(0x10930)
 #define EXYNOS5_CLKGATE_IP_GEN			EXYNOS_CLKREG(0x10934)
 #define EXYNOS5_CLKGATE_IP_FSYS			EXYNOS_CLKREG(0x10944)
 #define EXYNOS5_CLKGATE_IP_GPS			EXYNOS_CLKREG(0x1094C)
@@ -311,6 +338,8 @@
 #define EXYNOS5_CLKSRC_CDREX			EXYNOS_CLKREG(0x20200)
 #define EXYNOS5_CLKDIV_CDREX			EXYNOS_CLKREG(0x20500)
 
+#define EXYNOS5_PLL_DIV2_SEL			EXYNOS_CLKREG(0x20A24)
+
 #define EXYNOS5_EPLL_LOCK			EXYNOS_CLKREG(0x10030)
 
 #define EXYNOS5_EPLLCON0_LOCKED_SHIFT		(29)
diff --git a/arch/arm/mach-exynos/include/mach/regs-pmu.h b/arch/arm/mach-exynos/include/mach/regs-pmu.h
index 4c53f38b5a9e..43a99e6f56ab 100644
--- a/arch/arm/mach-exynos/include/mach/regs-pmu.h
+++ b/arch/arm/mach-exynos/include/mach/regs-pmu.h
@@ -1,9 +1,8 @@
-/* linux/arch/arm/mach-exynos4/include/mach/regs-pmu.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+/*
+ * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  *
- * EXYNOS4 - Power management unit definition
+ * EXYNOS - Power management unit definition
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -163,6 +162,9 @@
 #define S5P_CHECK_SLEEP				0x00000BAD
 
 /* Only for EXYNOS4210 */
+#define S5P_USBDEVICE_PHY_CONTROL	S5P_PMUREG(0x0704)
+#define S5P_USBDEVICE_PHY_ENABLE	(1 << 0)
+
 #define S5P_USBHOST_PHY_CONTROL		S5P_PMUREG(0x0708)
 #define S5P_USBHOST_PHY_ENABLE		(1 << 0)
 
@@ -177,7 +179,7 @@
 
 #define S5P_PMU_LCD1_CONF		S5P_PMUREG(0x3CA0)
 
-/* Only for EXYNOS4212 */
+/* Only for EXYNOS4x12 */
 #define S5P_ISP_ARM_LOWPWR			S5P_PMUREG(0x1050)
 #define S5P_DIS_IRQ_ISP_ARM_LOCAL_LOWPWR	S5P_PMUREG(0x1054)
 #define S5P_DIS_IRQ_ISP_ARM_CENTRAL_LOWPWR	S5P_PMUREG(0x1058)
@@ -218,4 +220,146 @@
 #define S5P_SECSS_MEM_OPTION			S5P_PMUREG(0x2EC8)
 #define S5P_ROTATOR_MEM_OPTION			S5P_PMUREG(0x2F48)
 
+/* Only for EXYNOS4412 */
+#define S5P_ARM_CORE2_LOWPWR			S5P_PMUREG(0x1020)
+#define S5P_DIS_IRQ_CORE2			S5P_PMUREG(0x1024)
+#define S5P_DIS_IRQ_CENTRAL2			S5P_PMUREG(0x1028)
+#define S5P_ARM_CORE3_LOWPWR			S5P_PMUREG(0x1030)
+#define S5P_DIS_IRQ_CORE3			S5P_PMUREG(0x1034)
+#define S5P_DIS_IRQ_CENTRAL3			S5P_PMUREG(0x1038)
+
+/* For EXYNOS5 */
+
+#define EXYNOS5_USB_CFG						S5P_PMUREG(0x0230)
+
+#define EXYNOS5_ARM_CORE0_SYS_PWR_REG				S5P_PMUREG(0x1000)
+#define EXYNOS5_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG		S5P_PMUREG(0x1004)
+#define EXYNOS5_DIS_IRQ_ARM_CORE0_CENTRAL_SYS_PWR_REG		S5P_PMUREG(0x1008)
+#define EXYNOS5_ARM_CORE1_SYS_PWR_REG				S5P_PMUREG(0x1010)
+#define EXYNOS5_DIS_IRQ_ARM_CORE1_LOCAL_SYS_PWR_REG		S5P_PMUREG(0x1014)
+#define EXYNOS5_DIS_IRQ_ARM_CORE1_CENTRAL_SYS_PWR_REG		S5P_PMUREG(0x1018)
+#define EXYNOS5_FSYS_ARM_SYS_PWR_REG				S5P_PMUREG(0x1040)
+#define EXYNOS5_DIS_IRQ_FSYS_ARM_CENTRAL_SYS_PWR_REG		S5P_PMUREG(0x1048)
+#define EXYNOS5_ISP_ARM_SYS_PWR_REG				S5P_PMUREG(0x1050)
+#define EXYNOS5_DIS_IRQ_ISP_ARM_LOCAL_SYS_PWR_REG		S5P_PMUREG(0x1054)
+#define EXYNOS5_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG		S5P_PMUREG(0x1058)
+#define EXYNOS5_ARM_COMMON_SYS_PWR_REG				S5P_PMUREG(0x1080)
+#define EXYNOS5_ARM_L2_SYS_PWR_REG				S5P_PMUREG(0x10C0)
+#define EXYNOS5_CMU_ACLKSTOP_SYS_PWR_REG			S5P_PMUREG(0x1100)
+#define EXYNOS5_CMU_SCLKSTOP_SYS_PWR_REG			S5P_PMUREG(0x1104)
+#define EXYNOS5_CMU_RESET_SYS_PWR_REG				S5P_PMUREG(0x110C)
+#define EXYNOS5_CMU_ACLKSTOP_SYSMEM_SYS_PWR_REG			S5P_PMUREG(0x1120)
+#define EXYNOS5_CMU_SCLKSTOP_SYSMEM_SYS_PWR_REG			S5P_PMUREG(0x1124)
+#define EXYNOS5_CMU_RESET_SYSMEM_SYS_PWR_REG			S5P_PMUREG(0x112C)
+#define EXYNOS5_DRAM_FREQ_DOWN_SYS_PWR_REG			S5P_PMUREG(0x1130)
+#define EXYNOS5_DDRPHY_DLLOFF_SYS_PWR_REG			S5P_PMUREG(0x1134)
+#define EXYNOS5_DDRPHY_DLLLOCK_SYS_PWR_REG			S5P_PMUREG(0x1138)
+#define EXYNOS5_APLL_SYSCLK_SYS_PWR_REG				S5P_PMUREG(0x1140)
+#define EXYNOS5_MPLL_SYSCLK_SYS_PWR_REG				S5P_PMUREG(0x1144)
+#define EXYNOS5_VPLL_SYSCLK_SYS_PWR_REG				S5P_PMUREG(0x1148)
+#define EXYNOS5_EPLL_SYSCLK_SYS_PWR_REG				S5P_PMUREG(0x114C)
+#define EXYNOS5_BPLL_SYSCLK_SYS_PWR_REG				S5P_PMUREG(0x1150)
+#define EXYNOS5_CPLL_SYSCLK_SYS_PWR_REG				S5P_PMUREG(0x1154)
+#define EXYNOS5_MPLLUSER_SYSCLK_SYS_PWR_REG			S5P_PMUREG(0x1164)
+#define EXYNOS5_BPLLUSER_SYSCLK_SYS_PWR_REG			S5P_PMUREG(0x1170)
+#define EXYNOS5_TOP_BUS_SYS_PWR_REG				S5P_PMUREG(0x1180)
+#define EXYNOS5_TOP_RETENTION_SYS_PWR_REG			S5P_PMUREG(0x1184)
+#define EXYNOS5_TOP_PWR_SYS_PWR_REG				S5P_PMUREG(0x1188)
+#define EXYNOS5_TOP_BUS_SYSMEM_SYS_PWR_REG			S5P_PMUREG(0x1190)
+#define EXYNOS5_TOP_RETENTION_SYSMEM_SYS_PWR_REG		S5P_PMUREG(0x1194)
+#define EXYNOS5_TOP_PWR_SYSMEM_SYS_PWR_REG			S5P_PMUREG(0x1198)
+#define EXYNOS5_LOGIC_RESET_SYS_PWR_REG				S5P_PMUREG(0x11A0)
+#define EXYNOS5_OSCCLK_GATE_SYS_PWR_REG				S5P_PMUREG(0x11A4)
+#define EXYNOS5_LOGIC_RESET_SYSMEM_SYS_PWR_REG			S5P_PMUREG(0x11B0)
+#define EXYNOS5_OSCCLK_GATE_SYSMEM_SYS_PWR_REG			S5P_PMUREG(0x11B4)
+#define EXYNOS5_USBOTG_MEM_SYS_PWR_REG				S5P_PMUREG(0x11C0)
+#define EXYNOS5_G2D_MEM_SYS_PWR_REG				S5P_PMUREG(0x11C8)
+#define EXYNOS5_USBDRD_MEM_SYS_PWR_REG				S5P_PMUREG(0x11CC)
+#define EXYNOS5_SDMMC_MEM_SYS_PWR_REG				S5P_PMUREG(0x11D0)
+#define EXYNOS5_CSSYS_MEM_SYS_PWR_REG				S5P_PMUREG(0x11D4)
+#define EXYNOS5_SECSS_MEM_SYS_PWR_REG				S5P_PMUREG(0x11D8)
+#define EXYNOS5_ROTATOR_MEM_SYS_PWR_REG				S5P_PMUREG(0x11DC)
+#define EXYNOS5_INTRAM_MEM_SYS_PWR_REG				S5P_PMUREG(0x11E0)
+#define EXYNOS5_INTROM_MEM_SYS_PWR_REG				S5P_PMUREG(0x11E4)
+#define EXYNOS5_JPEG_MEM_SYS_PWR_REG				S5P_PMUREG(0x11E8)
+#define EXYNOS5_HSI_MEM_SYS_PWR_REG				S5P_PMUREG(0x11EC)
+#define EXYNOS5_MCUIOP_MEM_SYS_PWR_REG				S5P_PMUREG(0x11F4)
+#define EXYNOS5_SATA_MEM_SYS_PWR_REG				S5P_PMUREG(0x11FC)
+#define EXYNOS5_PAD_RETENTION_DRAM_SYS_PWR_REG			S5P_PMUREG(0x1200)
+#define EXYNOS5_PAD_RETENTION_MAU_SYS_PWR_REG			S5P_PMUREG(0x1204)
+#define EXYNOS5_PAD_RETENTION_EFNAND_SYS_PWR_REG		S5P_PMUREG(0x1208)
+#define EXYNOS5_PAD_RETENTION_GPIO_SYS_PWR_REG			S5P_PMUREG(0x1220)
+#define EXYNOS5_PAD_RETENTION_UART_SYS_PWR_REG			S5P_PMUREG(0x1224)
+#define EXYNOS5_PAD_RETENTION_MMCA_SYS_PWR_REG			S5P_PMUREG(0x1228)
+#define EXYNOS5_PAD_RETENTION_MMCB_SYS_PWR_REG			S5P_PMUREG(0x122C)
+#define EXYNOS5_PAD_RETENTION_EBIA_SYS_PWR_REG			S5P_PMUREG(0x1230)
+#define EXYNOS5_PAD_RETENTION_EBIB_SYS_PWR_REG			S5P_PMUREG(0x1234)
+#define EXYNOS5_PAD_RETENTION_SPI_SYS_PWR_REG			S5P_PMUREG(0x1238)
+#define EXYNOS5_PAD_RETENTION_GPIO_SYSMEM_SYS_PWR_REG		S5P_PMUREG(0x123C)
+#define EXYNOS5_PAD_ISOLATION_SYS_PWR_REG			S5P_PMUREG(0x1240)
+#define EXYNOS5_PAD_ISOLATION_SYSMEM_SYS_PWR_REG		S5P_PMUREG(0x1250)
+#define EXYNOS5_PAD_ALV_SEL_SYS_PWR_REG				S5P_PMUREG(0x1260)
+#define EXYNOS5_XUSBXTI_SYS_PWR_REG				S5P_PMUREG(0x1280)
+#define EXYNOS5_XXTI_SYS_PWR_REG				S5P_PMUREG(0x1284)
+#define EXYNOS5_EXT_REGULATOR_SYS_PWR_REG			S5P_PMUREG(0x12C0)
+#define EXYNOS5_GPIO_MODE_SYS_PWR_REG				S5P_PMUREG(0x1300)
+#define EXYNOS5_GPIO_MODE_SYSMEM_SYS_PWR_REG			S5P_PMUREG(0x1320)
+#define EXYNOS5_GPIO_MODE_MAU_SYS_PWR_REG			S5P_PMUREG(0x1340)
+#define EXYNOS5_TOP_ASB_RESET_SYS_PWR_REG			S5P_PMUREG(0x1344)
+#define EXYNOS5_TOP_ASB_ISOLATION_SYS_PWR_REG			S5P_PMUREG(0x1348)
+#define EXYNOS5_GSCL_SYS_PWR_REG				S5P_PMUREG(0x1400)
+#define EXYNOS5_ISP_SYS_PWR_REG					S5P_PMUREG(0x1404)
+#define EXYNOS5_MFC_SYS_PWR_REG					S5P_PMUREG(0x1408)
+#define EXYNOS5_G3D_SYS_PWR_REG					S5P_PMUREG(0x140C)
+#define EXYNOS5_DISP1_SYS_PWR_REG				S5P_PMUREG(0x1414)
+#define EXYNOS5_MAU_SYS_PWR_REG					S5P_PMUREG(0x1418)
+#define EXYNOS5_CMU_CLKSTOP_GSCL_SYS_PWR_REG			S5P_PMUREG(0x1480)
+#define EXYNOS5_CMU_CLKSTOP_ISP_SYS_PWR_REG			S5P_PMUREG(0x1484)
+#define EXYNOS5_CMU_CLKSTOP_MFC_SYS_PWR_REG			S5P_PMUREG(0x1488)
+#define EXYNOS5_CMU_CLKSTOP_G3D_SYS_PWR_REG			S5P_PMUREG(0x148C)
+#define EXYNOS5_CMU_CLKSTOP_DISP1_SYS_PWR_REG			S5P_PMUREG(0x1494)
+#define EXYNOS5_CMU_CLKSTOP_MAU_SYS_PWR_REG			S5P_PMUREG(0x1498)
+#define EXYNOS5_CMU_SYSCLK_GSCL_SYS_PWR_REG			S5P_PMUREG(0x14C0)
+#define EXYNOS5_CMU_SYSCLK_ISP_SYS_PWR_REG			S5P_PMUREG(0x14C4)
+#define EXYNOS5_CMU_SYSCLK_MFC_SYS_PWR_REG			S5P_PMUREG(0x14C8)
+#define EXYNOS5_CMU_SYSCLK_G3D_SYS_PWR_REG			S5P_PMUREG(0x14CC)
+#define EXYNOS5_CMU_SYSCLK_DISP1_SYS_PWR_REG			S5P_PMUREG(0x14D4)
+#define EXYNOS5_CMU_SYSCLK_MAU_SYS_PWR_REG			S5P_PMUREG(0x14D8)
+#define EXYNOS5_CMU_RESET_GSCL_SYS_PWR_REG			S5P_PMUREG(0x1580)
+#define EXYNOS5_CMU_RESET_ISP_SYS_PWR_REG			S5P_PMUREG(0x1584)
+#define EXYNOS5_CMU_RESET_MFC_SYS_PWR_REG			S5P_PMUREG(0x1588)
+#define EXYNOS5_CMU_RESET_G3D_SYS_PWR_REG			S5P_PMUREG(0x158C)
+#define EXYNOS5_CMU_RESET_DISP1_SYS_PWR_REG			S5P_PMUREG(0x1594)
+#define EXYNOS5_CMU_RESET_MAU_SYS_PWR_REG			S5P_PMUREG(0x1598)
+
+#define EXYNOS5_ARM_CORE0_OPTION				S5P_PMUREG(0x2008)
+#define EXYNOS5_ARM_CORE1_OPTION				S5P_PMUREG(0x2088)
+#define EXYNOS5_FSYS_ARM_OPTION					S5P_PMUREG(0x2208)
+#define EXYNOS5_ISP_ARM_OPTION					S5P_PMUREG(0x2288)
+#define EXYNOS5_ARM_COMMON_OPTION				S5P_PMUREG(0x2408)
+#define EXYNOS5_TOP_PWR_OPTION					S5P_PMUREG(0x2C48)
+#define EXYNOS5_TOP_PWR_SYSMEM_OPTION				S5P_PMUREG(0x2CC8)
+#define EXYNOS5_JPEG_MEM_OPTION					S5P_PMUREG(0x2F48)
+#define EXYNOS5_GSCL_STATUS					S5P_PMUREG(0x4004)
+#define EXYNOS5_ISP_STATUS					S5P_PMUREG(0x4024)
+#define EXYNOS5_GSCL_OPTION					S5P_PMUREG(0x4008)
+#define EXYNOS5_ISP_OPTION					S5P_PMUREG(0x4028)
+#define EXYNOS5_MFC_OPTION					S5P_PMUREG(0x4048)
+#define EXYNOS5_G3D_CONFIGURATION				S5P_PMUREG(0x4060)
+#define EXYNOS5_G3D_STATUS					S5P_PMUREG(0x4064)
+#define EXYNOS5_G3D_OPTION					S5P_PMUREG(0x4068)
+#define EXYNOS5_DISP1_OPTION					S5P_PMUREG(0x40A8)
+#define EXYNOS5_MAU_OPTION					S5P_PMUREG(0x40C8)
+
+#define EXYNOS5_USE_SC_FEEDBACK					(1 << 1)
+#define EXYNOS5_USE_SC_COUNTER					(1 << 0)
+
+#define EXYNOS5_MANUAL_L2RSTDISABLE_CONTROL			(1 << 2)
+#define EXYNOS5_SKIP_DEACTIVATE_ACEACP_IN_PWDN			(1 << 7)
+
+#define EXYNOS5_OPTION_USE_STANDBYWFE				(1 << 24)
+#define EXYNOS5_OPTION_USE_STANDBYWFI				(1 << 16)
+
+#define EXYNOS5_OPTION_USE_RETENTION				(1 << 4)
+
 #endif /* __ASM_ARCH_REGS_PMU_H */
diff --git a/arch/arm/mach-exynos/include/mach/regs-sysmmu.h b/arch/arm/mach-exynos/include/mach/regs-sysmmu.h
deleted file mode 100644
index 68ff6ad08a2b..000000000000
--- a/arch/arm/mach-exynos/include/mach/regs-sysmmu.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* linux/arch/arm/mach-exynos4/include/mach/regs-sysmmu.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * EXYNOS4 - System MMU register
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_SYSMMU_H
-#define __ASM_ARCH_REGS_SYSMMU_H __FILE__
-
-#define S5P_MMU_CTRL			0x000
-#define S5P_MMU_CFG			0x004
-#define S5P_MMU_STATUS			0x008
-#define S5P_MMU_FLUSH			0x00C
-#define S5P_PT_BASE_ADDR		0x014
-#define S5P_INT_STATUS			0x018
-#define S5P_INT_CLEAR			0x01C
-#define S5P_PAGE_FAULT_ADDR		0x024
-#define S5P_AW_FAULT_ADDR		0x028
-#define S5P_AR_FAULT_ADDR		0x02C
-#define S5P_DEFAULT_SLAVE_ADDR		0x030
-
-#endif /* __ASM_ARCH_REGS_SYSMMU_H */
diff --git a/arch/arm/mach-exynos/include/mach/spi-clocks.h b/arch/arm/mach-exynos/include/mach/spi-clocks.h
index 576efdf6d091..c71a5fba6a84 100644
--- a/arch/arm/mach-exynos/include/mach/spi-clocks.h
+++ b/arch/arm/mach-exynos/include/mach/spi-clocks.h
@@ -11,6 +11,6 @@
 #define __ASM_ARCH_SPI_CLKS_H __FILE__
 
 /* Must source from SCLK_SPI */
-#define EXYNOS4_SPI_SRCCLK_SCLK		0
+#define EXYNOS_SPI_SRCCLK_SCLK		0
 
 #endif /* __ASM_ARCH_SPI_CLKS_H */
diff --git a/arch/arm/mach-exynos/include/mach/sysmmu.h b/arch/arm/mach-exynos/include/mach/sysmmu.h
index 6a5fbb534e82..998daf2add92 100644
--- a/arch/arm/mach-exynos/include/mach/sysmmu.h
+++ b/arch/arm/mach-exynos/include/mach/sysmmu.h
@@ -1,46 +1,66 @@
-/* linux/arch/arm/mach-exynos4/include/mach/sysmmu.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+/*
+ * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  *
- * Samsung sysmmu driver for EXYNOS4
+ * EXYNOS - System MMU support
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARM_ARCH_SYSMMU_H
-#define __ASM_ARM_ARCH_SYSMMU_H __FILE__
-
-enum exynos4_sysmmu_ips {
-	SYSMMU_MDMA,
-	SYSMMU_SSS,
-	SYSMMU_FIMC0,
-	SYSMMU_FIMC1,
-	SYSMMU_FIMC2,
-	SYSMMU_FIMC3,
-	SYSMMU_JPEG,
-	SYSMMU_FIMD0,
-	SYSMMU_FIMD1,
-	SYSMMU_PCIe,
-	SYSMMU_G2D,
-	SYSMMU_ROTATOR,
-	SYSMMU_MDMA2,
-	SYSMMU_TV,
-	SYSMMU_MFC_L,
-	SYSMMU_MFC_R,
-	EXYNOS4_SYSMMU_TOTAL_IPNUM,
+ */
+
+#ifndef _ARM_MACH_EXYNOS_SYSMMU_H_
+#define _ARM_MACH_EXYNOS_SYSMMU_H_
+
+struct sysmmu_platform_data {
+	char *dbgname;
+	/* comma(,) separated list of clock names for clock gating */
+	char *clockname;
 };
 
-#define S5P_SYSMMU_TOTAL_IPNUM		EXYNOS4_SYSMMU_TOTAL_IPNUM
+#define SYSMMU_DEVNAME_BASE "exynos-sysmmu"
+
+#define SYSMMU_CLOCK_NAME "sysmmu"
+#define SYSMMU_CLOCK_NAME2 "sysmmu_mc"
+
+#ifdef CONFIG_EXYNOS_DEV_SYSMMU
+#include <linux/device.h>
+struct platform_device;
+
+#define SYSMMU_PLATDEV(ipname) exynos_device_sysmmu_##ipname
+
+extern struct platform_device SYSMMU_PLATDEV(mfc_l);
+extern struct platform_device SYSMMU_PLATDEV(mfc_r);
+extern struct platform_device SYSMMU_PLATDEV(tv);
+extern struct platform_device SYSMMU_PLATDEV(jpeg);
+extern struct platform_device SYSMMU_PLATDEV(rot);
+extern struct platform_device SYSMMU_PLATDEV(fimc0);
+extern struct platform_device SYSMMU_PLATDEV(fimc1);
+extern struct platform_device SYSMMU_PLATDEV(fimc2);
+extern struct platform_device SYSMMU_PLATDEV(fimc3);
+extern struct platform_device SYSMMU_PLATDEV(gsc0);
+extern struct platform_device SYSMMU_PLATDEV(gsc1);
+extern struct platform_device SYSMMU_PLATDEV(gsc2);
+extern struct platform_device SYSMMU_PLATDEV(gsc3);
+extern struct platform_device SYSMMU_PLATDEV(isp);
+extern struct platform_device SYSMMU_PLATDEV(fimd0);
+extern struct platform_device SYSMMU_PLATDEV(fimd1);
+extern struct platform_device SYSMMU_PLATDEV(camif0);
+extern struct platform_device SYSMMU_PLATDEV(camif1);
+extern struct platform_device SYSMMU_PLATDEV(2d);
 
-extern const char *sysmmu_ips_name[EXYNOS4_SYSMMU_TOTAL_IPNUM];
+#ifdef CONFIG_IOMMU_API
+static inline void platform_set_sysmmu(
+				struct device *sysmmu, struct device *dev)
+{
+	dev->archdata.iommu = sysmmu;
+}
+#endif
 
-typedef enum exynos4_sysmmu_ips sysmmu_ips;
+#else /* !CONFIG_EXYNOS_DEV_SYSMMU */
+#define platform_set_sysmmu(dev, sysmmu) do { } while (0)
+#endif
 
-void sysmmu_clk_init(struct device *dev, sysmmu_ips ips);
-void sysmmu_clk_enable(sysmmu_ips ips);
-void sysmmu_clk_disable(sysmmu_ips ips);
+#define SYSMMU_CLOCK_DEVNAME(ipname, id) (SYSMMU_DEVNAME_BASE "." #id)
 
-#endif /* __ASM_ARM_ARCH_SYSMMU_H */
+#endif /* _ARM_MACH_EXYNOS_SYSMMU_H_ */
diff --git a/arch/arm/mach-exynos/include/mach/uncompress.h b/arch/arm/mach-exynos/include/mach/uncompress.h
index 493f4f365ddf..2979995d5a6a 100644
--- a/arch/arm/mach-exynos/include/mach/uncompress.h
+++ b/arch/arm/mach-exynos/include/mach/uncompress.h
@@ -20,9 +20,24 @@ volatile u8 *uart_base;
 
 #include <plat/uncompress.h>
 
+static unsigned int __raw_readl(unsigned int ptr)
+{
+	return *((volatile unsigned int *)ptr);
+}
+
 static void arch_detect_cpu(void)
 {
-	if (machine_is_smdk5250())
+	u32 chip_id = __raw_readl(EXYNOS_PA_CHIPID);
+
+	/*
+	 * product_id is bits 31:12
+	 *    bits 23:20 describe the exynosX family
+	 *
+	 */
+	chip_id >>= 20;
+	chip_id &= 0xf;
+
+	if (chip_id == 0x5)
 		uart_base = (volatile u8 *)EXYNOS5_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT);
 	else
 		uart_base = (volatile u8 *)EXYNOS4_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT);
diff --git a/arch/arm/mach-exynos/mach-armlex4210.c b/arch/arm/mach-exynos/mach-armlex4210.c
index d726fcd3acf9..5a3daa0168d8 100644
--- a/arch/arm/mach-exynos/mach-armlex4210.c
+++ b/arch/arm/mach-exynos/mach-armlex4210.c
@@ -77,7 +77,6 @@ static struct s3c2410_uartcfg armlex4210_uartcfgs[] __initdata = {
 
 static struct s3c_sdhci_platdata armlex4210_hsmmc0_pdata __initdata = {
 	.cd_type		= S3C_SDHCI_CD_PERMANENT,
-	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
 #ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT
 	.max_width		= 8,
 	.host_caps		= MMC_CAP_8_BIT_DATA,
@@ -88,13 +87,11 @@ static struct s3c_sdhci_platdata armlex4210_hsmmc2_pdata __initdata = {
 	.cd_type		= S3C_SDHCI_CD_GPIO,
 	.ext_cd_gpio		= EXYNOS4_GPX2(5),
 	.ext_cd_gpio_invert	= 1,
-	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
 	.max_width		= 4,
 };
 
 static struct s3c_sdhci_platdata armlex4210_hsmmc3_pdata __initdata = {
 	.cd_type		= S3C_SDHCI_CD_PERMANENT,
-	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
 	.max_width		= 4,
 };
 
@@ -121,16 +118,9 @@ static void __init armlex4210_wlan_init(void)
 }
 
 static struct resource armlex4210_smsc911x_resources[] = {
-	[0] = {
-		.start	= EXYNOS4_PA_SROM_BANK(3),
-		.end	= EXYNOS4_PA_SROM_BANK(3) + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_EINT(27),
-		.end	= IRQ_EINT(27),
-		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
-	},
+	[0] = DEFINE_RES_MEM(EXYNOS4_PA_SROM_BANK(3), SZ_64K),
+	[1] = DEFINE_RES_NAMED(IRQ_EINT(27), 1, NULL, IORESOURCE_IRQ \
+					| IRQF_TRIGGER_HIGH),
 };
 
 static struct smsc911x_platform_config smsc9215_config = {
@@ -157,7 +147,6 @@ static struct platform_device *armlex4210_devices[] __initdata = {
 	&s3c_device_hsmmc3,
 	&s3c_device_rtc,
 	&s3c_device_wdt,
-	&exynos4_device_sysmmu,
 	&samsung_asoc_dma,
 	&armlex4210_smsc911x,
 	&exynos4_device_ahci,
@@ -214,6 +203,7 @@ MACHINE_START(ARMLEX4210, "ARMLEX4210")
 	.map_io		= armlex4210_map_io,
 	.handle_irq	= gic_handle_irq,
 	.init_machine	= armlex4210_machine_init,
+	.init_late	= exynos_init_late,
 	.timer		= &exynos4_timer,
 	.restart	= exynos4_restart,
 MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c
index 8245f1c761d9..e7e9743543ac 100644
--- a/arch/arm/mach-exynos/mach-exynos4-dt.c
+++ b/arch/arm/mach-exynos/mach-exynos4-dt.c
@@ -83,6 +83,7 @@ DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)")
 	.map_io		= exynos4210_dt_map_io,
 	.handle_irq	= gic_handle_irq,
 	.init_machine	= exynos4210_dt_machine_init,
+	.init_late	= exynos_init_late,
 	.timer		= &exynos4_timer,
 	.dt_compat	= exynos4210_dt_compat,
 	.restart        = exynos4_restart,
diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c
index 0d26f50081ad..7b1e11a228cc 100644
--- a/arch/arm/mach-exynos/mach-exynos5-dt.c
+++ b/arch/arm/mach-exynos/mach-exynos5-dt.c
@@ -43,9 +43,13 @@ static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = {
 				"exynos4210-uart.2", NULL),
 	OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5_PA_UART3,
 				"exynos4210-uart.3", NULL),
+	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(0),
+				"s3c2440-i2c.0", NULL),
+	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(1),
+				"s3c2440-i2c.1", NULL),
 	OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA0, "dma-pl330.0", NULL),
 	OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.1", NULL),
-	OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.2", NULL),
+	OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_MDMA1, "dma-pl330.2", NULL),
 	{},
 };
 
@@ -72,6 +76,7 @@ DT_MACHINE_START(EXYNOS5_DT, "SAMSUNG EXYNOS5 (Flattened Device Tree)")
 	.map_io		= exynos5250_dt_map_io,
 	.handle_irq	= gic_handle_irq,
 	.init_machine	= exynos5250_dt_machine_init,
+	.init_late	= exynos_init_late,
 	.timer		= &exynos4_timer,
 	.dt_compat	= exynos5250_dt_compat,
 	.restart        = exynos5_restart,
diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c
index b3982c867c9c..972983e392bc 100644
--- a/arch/arm/mach-exynos/mach-nuri.c
+++ b/arch/arm/mach-exynos/mach-nuri.c
@@ -25,6 +25,8 @@
 #include <linux/mmc/host.h>
 #include <linux/fb.h>
 #include <linux/pwm_backlight.h>
+#include <linux/platform_data/s3c-hsotg.h>
+#include <drm/exynos_drm.h>
 
 #include <video/platform_lcd.h>
 #include <media/m5mols.h>
@@ -112,8 +114,8 @@ static struct s3c_sdhci_platdata nuri_hsmmc0_data __initdata = {
 	.host_caps		= (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA |
 				MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
 				MMC_CAP_ERASE),
+	.host_caps2		= MMC_CAP2_BROKEN_VOLTAGE,
 	.cd_type		= S3C_SDHCI_CD_PERMANENT,
-	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
 };
 
 static struct regulator_consumer_supply emmc_supplies[] = {
@@ -154,7 +156,6 @@ static struct s3c_sdhci_platdata nuri_hsmmc2_data __initdata = {
 	.ext_cd_gpio		= EXYNOS4_GPX3(3),	/* XEINT_27 */
 	.ext_cd_gpio_invert	= 1,
 	.cd_type		= S3C_SDHCI_CD_GPIO,
-	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
 };
 
 /* WLAN */
@@ -163,7 +164,6 @@ static struct s3c_sdhci_platdata nuri_hsmmc3_data __initdata = {
 	.host_caps		= MMC_CAP_4_BIT_DATA |
 				MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
 	.cd_type		= S3C_SDHCI_CD_EXTERNAL,
-	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
 };
 
 static void __init nuri_sdhci_init(void)
@@ -212,6 +212,29 @@ static struct platform_device nuri_gpio_keys = {
 	},
 };
 
+#ifdef CONFIG_DRM_EXYNOS
+static struct exynos_drm_fimd_pdata drm_fimd_pdata = {
+	.panel = {
+		.timing	= {
+			.xres		= 1024,
+			.yres		= 600,
+			.hsync_len	= 40,
+			.left_margin	= 79,
+			.right_margin	= 200,
+			.vsync_len	= 10,
+			.upper_margin	= 10,
+			.lower_margin	= 11,
+			.refresh	= 60,
+		},
+	},
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB |
+			  VIDCON0_CLKSEL_LCD,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+	.default_win	= 3,
+	.bpp		= 32,
+};
+
+#else
 /* Frame Buffer */
 static struct s3c_fb_pd_win nuri_fb_win0 = {
 	.win_mode = {
@@ -238,6 +261,7 @@ static struct s3c_fb_platdata nuri_fb_pdata __initdata = {
 	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
 	.setup_gpio	= exynos4_fimd0_gpio_setup_24bpp,
 };
+#endif
 
 static void nuri_lcd_power_on(struct plat_lcd_data *pd, unsigned int power)
 {
@@ -307,49 +331,7 @@ static struct i2c_board_info i2c1_devs[] __initdata = {
 };
 
 /* TSP */
-static u8 mxt_init_vals[] = {
-	/* MXT_GEN_COMMAND(6) */
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	/* MXT_GEN_POWER(7) */
-	0x20, 0xff, 0x32,
-	/* MXT_GEN_ACQUIRE(8) */
-	0x0a, 0x00, 0x05, 0x00, 0x00, 0x00, 0x09, 0x23,
-	/* MXT_TOUCH_MULTI(9) */
-	0x00, 0x00, 0x00, 0x13, 0x0b, 0x00, 0x00, 0x00, 0x02, 0x00,
-	0x00, 0x01, 0x01, 0x0e, 0x0a, 0x0a, 0x0a, 0x0a, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00,
-	/* MXT_TOUCH_KEYARRAY(15) */
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00,
-	0x00,
-	/* MXT_SPT_GPIOPWM(19) */
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	/* MXT_PROCI_GRIPFACE(20) */
-	0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x28, 0x04,
-	0x0f, 0x0a,
-	/* MXT_PROCG_NOISE(22) */
-	0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x23, 0x00,
-	0x00, 0x05, 0x0f, 0x19, 0x23, 0x2d, 0x03,
-	/* MXT_TOUCH_PROXIMITY(23) */
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00,
-	/* MXT_PROCI_ONETOUCH(24) */
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	/* MXT_SPT_SELFTEST(25) */
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00,
-	/* MXT_PROCI_TWOTOUCH(27) */
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	/* MXT_SPT_CTECONFIG(28) */
-	0x00, 0x00, 0x02, 0x08, 0x10, 0x00,
-};
-
 static struct mxt_platform_data mxt_platform_data = {
-	.config			= mxt_init_vals,
-	.config_length		= ARRAY_SIZE(mxt_init_vals),
-
 	.x_line			= 18,
 	.y_line			= 11,
 	.x_size			= 1024,
@@ -392,6 +374,7 @@ static struct regulator_consumer_supply __initdata max8997_ldo1_[] = {
 	REGULATOR_SUPPLY("vdd", "s5p-adc"), /* Used by CPU's ADC drv */
 };
 static struct regulator_consumer_supply __initdata max8997_ldo3_[] = {
+	REGULATOR_SUPPLY("vusb_d", "s3c-hsotg"), /* USB */
 	REGULATOR_SUPPLY("vdd11", "s5p-mipi-csis.0"), /* MIPI */
 };
 static struct regulator_consumer_supply __initdata max8997_ldo4_[] = {
@@ -407,7 +390,7 @@ static struct regulator_consumer_supply __initdata max8997_ldo7_[] = {
 	REGULATOR_SUPPLY("dig_18", "0-001f"), /* HCD803 */
 };
 static struct regulator_consumer_supply __initdata max8997_ldo8_[] = {
-	REGULATOR_SUPPLY("vusb_d", NULL), /* Used by CPU */
+	REGULATOR_SUPPLY("vusb_a", "s3c-hsotg"), /* USB */
 	REGULATOR_SUPPLY("vdac", NULL), /* Used by CPU */
 };
 static struct regulator_consumer_supply __initdata max8997_ldo11_[] = {
@@ -571,7 +554,7 @@ static struct regulator_init_data __initdata max8997_ldo7_data = {
 
 static struct regulator_init_data __initdata max8997_ldo8_data = {
 	.constraints	= {
-		.name		= "VUSB/VDAC_3.3V_C210",
+		.name		= "VUSB+VDAC_3.3V_C210",
 		.min_uV		= 3300000,
 		.max_uV		= 3300000,
 		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
@@ -863,6 +846,7 @@ static struct regulator_init_data __initdata max8997_esafeout1_data = {
 	.constraints	= {
 		.name		= "SAFEOUT1",
 		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+		.always_on	= 1,
 		.state_mem	= {
 			.disabled	= 1,
 		},
@@ -1120,6 +1104,9 @@ static void __init nuri_ehci_init(void)
 	s5p_ehci_set_platdata(pdata);
 }
 
+/* USB OTG */
+static struct s3c_hsotg_plat nuri_hsotg_pdata;
+
 /* CAMERA */
 static struct regulator_consumer_supply cam_vt_cam15_supply =
 	REGULATOR_SUPPLY("vdd_core", "6-003c");
@@ -1332,6 +1319,7 @@ static struct platform_device *nuri_devices[] __initdata = {
 	&s5p_device_mfc_l,
 	&s5p_device_mfc_r,
 	&s5p_device_fimc_md,
+	&s3c_device_usb_hsotg,
 
 	/* NURI Devices */
 	&nuri_gpio_keys,
@@ -1343,10 +1331,14 @@ static struct platform_device *nuri_devices[] __initdata = {
 	&cam_vdda_fixed_rdev,
 	&cam_8m_12v_fixed_rdev,
 	&exynos4_bus_devfreq,
+#ifdef CONFIG_DRM_EXYNOS
+	&exynos_device_drm,
+#endif
 };
 
 static void __init nuri_map_io(void)
 {
+	clk_xusbxti.rate = 24000000;
 	exynos_init_io(NULL, 0);
 	s3c24xx_init_clocks(24000000);
 	s3c24xx_init_uarts(nuri_uartcfgs, ARRAY_SIZE(nuri_uartcfgs));
@@ -1374,12 +1366,17 @@ static void __init nuri_machine_init(void)
 	i2c_register_board_info(9, i2c9_devs, ARRAY_SIZE(i2c9_devs));
 	s3c_i2c6_set_platdata(&nuri_i2c6_platdata);
 
+#ifdef CONFIG_DRM_EXYNOS
+	s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
+	exynos4_fimd0_gpio_setup_24bpp();
+#else
 	s5p_fimd0_set_platdata(&nuri_fb_pdata);
+#endif
 
 	nuri_camera_init();
 
 	nuri_ehci_init();
-	clk_xusbxti.rate = 24000000;
+	s3c_hsotg_set_platdata(&nuri_hsotg_pdata);
 
 	/* Last */
 	platform_add_devices(nuri_devices, ARRAY_SIZE(nuri_devices));
@@ -1392,6 +1389,7 @@ MACHINE_START(NURI, "NURI")
 	.map_io		= nuri_map_io,
 	.handle_irq	= gic_handle_irq,
 	.init_machine	= nuri_machine_init,
+	.init_late	= exynos_init_late,
 	.timer		= &exynos4_timer,
 	.reserve        = &nuri_reserve,
 	.restart	= exynos4_restart,
diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c
index 878d4c99142d..a7f7fd567dde 100644
--- a/arch/arm/mach-exynos/mach-origen.c
+++ b/arch/arm/mach-exynos/mach-origen.c
@@ -45,6 +45,7 @@
 #include <mach/ohci.h>
 #include <mach/map.h>
 
+#include <drm/exynos_drm.h>
 #include "common.h"
 
 /* Following are default values for UCON, ULCON and UFCON UART registers */
@@ -472,12 +473,10 @@ static struct i2c_board_info i2c0_devs[] __initdata = {
 
 static struct s3c_sdhci_platdata origen_hsmmc0_pdata __initdata = {
 	.cd_type		= S3C_SDHCI_CD_INTERNAL,
-	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
 };
 
 static struct s3c_sdhci_platdata origen_hsmmc2_pdata __initdata = {
 	.cd_type		= S3C_SDHCI_CD_INTERNAL,
-	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
 };
 
 /* USB EHCI */
@@ -583,6 +582,27 @@ static struct platform_device origen_lcd_hv070wsa = {
 	.dev.platform_data	= &origen_lcd_hv070wsa_data,
 };
 
+#ifdef CONFIG_DRM_EXYNOS
+static struct exynos_drm_fimd_pdata drm_fimd_pdata = {
+	.panel	= {
+		.timing	= {
+			.left_margin	= 64,
+			.right_margin	= 16,
+			.upper_margin	= 64,
+			.lower_margin	= 16,
+			.hsync_len	= 48,
+			.vsync_len	= 3,
+			.xres		= 1024,
+			.yres		= 600,
+		},
+	},
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC |
+				VIDCON1_INV_VCLK,
+	.default_win	= 0,
+	.bpp		= 32,
+};
+#else
 static struct s3c_fb_pd_win origen_fb_win0 = {
 	.win_mode = {
 		.left_margin	= 64,
@@ -596,6 +616,8 @@ static struct s3c_fb_pd_win origen_fb_win0 = {
 	},
 	.max_bpp		= 32,
 	.default_bpp		= 24,
+	.virtual_x		= 1024,
+	.virtual_y		= 2 * 600,
 };
 
 static struct s3c_fb_platdata origen_lcd_pdata __initdata = {
@@ -605,9 +627,10 @@ static struct s3c_fb_platdata origen_lcd_pdata __initdata = {
 				VIDCON1_INV_VCLK,
 	.setup_gpio	= exynos4_fimd0_gpio_setup_24bpp,
 };
+#endif
 
 /* Bluetooth rfkill gpio platform data */
-struct rfkill_gpio_platform_data origen_bt_pdata = {
+static struct rfkill_gpio_platform_data origen_bt_pdata = {
 	.reset_gpio	= EXYNOS4_GPX2(2),
 	.shutdown_gpio	= -1,
 	.type		= RFKILL_TYPE_BLUETOOTH,
@@ -644,6 +667,9 @@ static struct platform_device *origen_devices[] __initdata = {
 	&s5p_device_mfc_l,
 	&s5p_device_mfc_r,
 	&s5p_device_mixer,
+#ifdef CONFIG_DRM_EXYNOS
+	&exynos_device_drm,
+#endif
 	&exynos4_device_ohci,
 	&origen_device_gpiokeys,
 	&origen_lcd_hv070wsa,
@@ -719,7 +745,12 @@ static void __init origen_machine_init(void)
 	s5p_tv_setup();
 	s5p_i2c_hdmiphy_set_platdata(NULL);
 
+#ifdef CONFIG_DRM_EXYNOS
+	s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
+	exynos4_fimd0_gpio_setup_24bpp();
+#else
 	s5p_fimd0_set_platdata(&origen_lcd_pdata);
+#endif
 
 	platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices));
 
@@ -735,6 +766,7 @@ MACHINE_START(ORIGEN, "ORIGEN")
 	.map_io		= origen_map_io,
 	.handle_irq	= gic_handle_irq,
 	.init_machine	= origen_machine_init,
+	.init_late	= exynos_init_late,
 	.timer		= &exynos4_timer,
 	.reserve	= &origen_reserve,
 	.restart	= exynos4_restart,
diff --git a/arch/arm/mach-exynos/mach-smdk4x12.c b/arch/arm/mach-exynos/mach-smdk4x12.c
index d00e4f016a68..fb09c70e195a 100644
--- a/arch/arm/mach-exynos/mach-smdk4x12.c
+++ b/arch/arm/mach-exynos/mach-smdk4x12.c
@@ -31,6 +31,7 @@
 #include <plat/gpio-cfg.h>
 #include <plat/iic.h>
 #include <plat/keypad.h>
+#include <plat/mfc.h>
 #include <plat/regs-serial.h>
 #include <plat/sdhci.h>
 
@@ -85,7 +86,6 @@ static struct s3c2410_uartcfg smdk4x12_uartcfgs[] __initdata = {
 
 static struct s3c_sdhci_platdata smdk4x12_hsmmc2_pdata __initdata = {
 	.cd_type		= S3C_SDHCI_CD_INTERNAL,
-	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
 #ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT
 	.max_width		= 8,
 	.host_caps		= MMC_CAP_8_BIT_DATA,
@@ -94,7 +94,6 @@ static struct s3c_sdhci_platdata smdk4x12_hsmmc2_pdata __initdata = {
 
 static struct s3c_sdhci_platdata smdk4x12_hsmmc3_pdata __initdata = {
 	.cd_type		= S3C_SDHCI_CD_INTERNAL,
-	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
 };
 
 static struct regulator_consumer_supply max8997_buck1 =
@@ -244,6 +243,14 @@ static struct platform_device *smdk4x12_devices[] __initdata = {
 	&s3c_device_i2c7,
 	&s3c_device_rtc,
 	&s3c_device_wdt,
+	&s5p_device_fimc0,
+	&s5p_device_fimc1,
+	&s5p_device_fimc2,
+	&s5p_device_fimc3,
+	&s5p_device_fimc_md,
+	&s5p_device_mfc,
+	&s5p_device_mfc_l,
+	&s5p_device_mfc_r,
 	&samsung_device_keypad,
 };
 
@@ -256,6 +263,11 @@ static void __init smdk4x12_map_io(void)
 	s3c24xx_init_uarts(smdk4x12_uartcfgs, ARRAY_SIZE(smdk4x12_uartcfgs));
 }
 
+static void __init smdk4x12_reserve(void)
+{
+	s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
+}
+
 static void __init smdk4x12_machine_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
@@ -293,6 +305,7 @@ MACHINE_START(SMDK4212, "SMDK4212")
 	.init_machine	= smdk4x12_machine_init,
 	.timer		= &exynos4_timer,
 	.restart	= exynos4_restart,
+	.reserve	= &smdk4x12_reserve,
 MACHINE_END
 
 MACHINE_START(SMDK4412, "SMDK4412")
@@ -303,6 +316,8 @@ MACHINE_START(SMDK4412, "SMDK4412")
 	.map_io		= smdk4x12_map_io,
 	.handle_irq	= gic_handle_irq,
 	.init_machine	= smdk4x12_machine_init,
+	.init_late	= exynos_init_late,
 	.timer		= &exynos4_timer,
 	.restart	= exynos4_restart,
+	.reserve	= &smdk4x12_reserve,
 MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c
index 83b91fa777c1..70df1a0c2118 100644
--- a/arch/arm/mach-exynos/mach-smdkv310.c
+++ b/arch/arm/mach-exynos/mach-smdkv310.c
@@ -44,6 +44,7 @@
 #include <mach/map.h>
 #include <mach/ohci.h>
 
+#include <drm/exynos_drm.h>
 #include "common.h"
 
 /* Following are default values for UCON, ULCON and UFCON UART registers */
@@ -93,7 +94,6 @@ static struct s3c2410_uartcfg smdkv310_uartcfgs[] __initdata = {
 
 static struct s3c_sdhci_platdata smdkv310_hsmmc0_pdata __initdata = {
 	.cd_type		= S3C_SDHCI_CD_INTERNAL,
-	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
 #ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT
 	.max_width		= 8,
 	.host_caps		= MMC_CAP_8_BIT_DATA,
@@ -104,12 +104,10 @@ static struct s3c_sdhci_platdata smdkv310_hsmmc1_pdata __initdata = {
 	.cd_type		= S3C_SDHCI_CD_GPIO,
 	.ext_cd_gpio		= EXYNOS4_GPK0(2),
 	.ext_cd_gpio_invert	= 1,
-	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
 };
 
 static struct s3c_sdhci_platdata smdkv310_hsmmc2_pdata __initdata = {
 	.cd_type		= S3C_SDHCI_CD_INTERNAL,
-	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
 #ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT
 	.max_width		= 8,
 	.host_caps		= MMC_CAP_8_BIT_DATA,
@@ -120,7 +118,6 @@ static struct s3c_sdhci_platdata smdkv310_hsmmc3_pdata __initdata = {
 	.cd_type		= S3C_SDHCI_CD_GPIO,
 	.ext_cd_gpio		= EXYNOS4_GPK2(2),
 	.ext_cd_gpio_invert	= 1,
-	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
 };
 
 static void lcd_lte480wv_set_power(struct plat_lcd_data *pd,
@@ -160,6 +157,26 @@ static struct platform_device smdkv310_lcd_lte480wv = {
 	.dev.platform_data	= &smdkv310_lcd_lte480wv_data,
 };
 
+#ifdef CONFIG_DRM_EXYNOS
+static struct exynos_drm_fimd_pdata drm_fimd_pdata = {
+	.panel	= {
+		.timing	= {
+			.left_margin	= 13,
+			.right_margin	= 8,
+			.upper_margin	= 7,
+			.lower_margin	= 5,
+			.hsync_len	= 3,
+			.vsync_len	= 1,
+			.xres		= 800,
+			.yres		= 480,
+		},
+	},
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+	.default_win	= 0,
+	.bpp		= 32,
+};
+#else
 static struct s3c_fb_pd_win smdkv310_fb_win0 = {
 	.win_mode = {
 		.left_margin	= 13,
@@ -181,18 +198,12 @@ static struct s3c_fb_platdata smdkv310_lcd0_pdata __initdata = {
 	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
 	.setup_gpio	= exynos4_fimd0_gpio_setup_24bpp,
 };
+#endif
 
 static struct resource smdkv310_smsc911x_resources[] = {
-	[0] = {
-		.start	= EXYNOS4_PA_SROM_BANK(1),
-		.end	= EXYNOS4_PA_SROM_BANK(1) + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_EINT(5),
-		.end	= IRQ_EINT(5),
-		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
-	},
+	[0] = DEFINE_RES_MEM(EXYNOS4_PA_SROM_BANK(1), SZ_64K),
+	[1] = DEFINE_RES_NAMED(IRQ_EINT(5), 1, NULL, IORESOURCE_IRQ \
+						| IRQF_TRIGGER_LOW),
 };
 
 static struct smsc911x_platform_config smsc9215_config = {
@@ -273,6 +284,9 @@ static struct platform_device *smdkv310_devices[] __initdata = {
 	&s5p_device_fimc_md,
 	&s5p_device_g2d,
 	&s5p_device_jpeg,
+#ifdef CONFIG_DRM_EXYNOS
+	&exynos_device_drm,
+#endif
 	&exynos4_device_ac97,
 	&exynos4_device_i2s0,
 	&exynos4_device_ohci,
@@ -281,7 +295,6 @@ static struct platform_device *smdkv310_devices[] __initdata = {
 	&s5p_device_mfc_l,
 	&s5p_device_mfc_r,
 	&exynos4_device_spdif,
-	&exynos4_device_sysmmu,
 	&samsung_asoc_dma,
 	&samsung_asoc_idma,
 	&s5p_device_fimd0,
@@ -364,7 +377,12 @@ static void __init smdkv310_machine_init(void)
 	samsung_keypad_set_platdata(&smdkv310_keypad_data);
 
 	samsung_bl_set(&smdkv310_bl_gpio_info, &smdkv310_bl_data);
+#ifdef CONFIG_DRM_EXYNOS
+	s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
+	exynos4_fimd0_gpio_setup_24bpp();
+#else
 	s5p_fimd0_set_platdata(&smdkv310_lcd0_pdata);
+#endif
 
 	smdkv310_ehci_init();
 	smdkv310_ohci_init();
@@ -393,6 +411,7 @@ MACHINE_START(SMDKC210, "SMDKC210")
 	.map_io		= smdkv310_map_io,
 	.handle_irq	= gic_handle_irq,
 	.init_machine	= smdkv310_machine_init,
+	.init_late	= exynos_init_late,
 	.timer		= &exynos4_timer,
 	.restart	= exynos4_restart,
 MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c
index 6bb9dbdd73fd..083b44de9c10 100644
--- a/arch/arm/mach-exynos/mach-universal_c210.c
+++ b/arch/arm/mach-exynos/mach-universal_c210.c
@@ -23,12 +23,15 @@
 #include <linux/i2c-gpio.h>
 #include <linux/i2c/mcs.h>
 #include <linux/i2c/atmel_mxt_ts.h>
+#include <linux/platform_data/s3c-hsotg.h>
+#include <drm/exynos_drm.h>
 
 #include <asm/mach/arch.h>
 #include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 
 #include <plat/regs-serial.h>
+#include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/iic.h>
@@ -39,6 +42,7 @@
 #include <plat/pd.h>
 #include <plat/regs-fb-v4.h>
 #include <plat/fimc-core.h>
+#include <plat/s5p-time.h>
 #include <plat/camport.h>
 #include <plat/mipi_csis.h>
 
@@ -203,6 +207,7 @@ static struct regulator_init_data lp3974_ldo2_data = {
 };
 
 static struct regulator_consumer_supply lp3974_ldo3_consumer[] = {
+	REGULATOR_SUPPLY("vusb_a", "s3c-hsotg"),
 	REGULATOR_SUPPLY("vdd", "exynos4-hdmi"),
 	REGULATOR_SUPPLY("vdd_pll", "exynos4-hdmi"),
 	REGULATOR_SUPPLY("vdd11", "s5p-mipi-csis.0"),
@@ -288,6 +293,7 @@ static struct regulator_init_data lp3974_ldo7_data = {
 };
 
 static struct regulator_consumer_supply lp3974_ldo8_consumer[] = {
+	REGULATOR_SUPPLY("vusb_d", "s3c-hsotg"),
 	REGULATOR_SUPPLY("vdd33a_dac", "s5p-sdo"),
 };
 
@@ -484,7 +490,10 @@ static struct regulator_init_data lp3974_vichg_data = {
 static struct regulator_init_data lp3974_esafeout1_data = {
 	.constraints	= {
 		.name		= "SAFEOUT1",
+		.min_uV		= 4800000,
+		.max_uV		= 4800000,
 		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+		.always_on	= 1,
 		.state_mem	= {
 			.enabled	= 1,
 		},
@@ -746,8 +755,8 @@ static struct s3c_sdhci_platdata universal_hsmmc0_data __initdata = {
 	.max_width		= 8,
 	.host_caps		= (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA |
 				MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+	.host_caps2		= MMC_CAP2_BROKEN_VOLTAGE,
 	.cd_type		= S3C_SDHCI_CD_PERMANENT,
-	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
 };
 
 static struct regulator_consumer_supply mmc0_supplies[] = {
@@ -787,7 +796,6 @@ static struct s3c_sdhci_platdata universal_hsmmc2_data __initdata = {
 	.ext_cd_gpio		= EXYNOS4_GPX3(4),      /* XEINT_28 */
 	.ext_cd_gpio_invert	= 1,
 	.cd_type		= S3C_SDHCI_CD_GPIO,
-	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
 };
 
 /* WiFi */
@@ -810,6 +818,29 @@ static struct i2c_board_info i2c1_devs[] __initdata = {
 	/* Gyro, To be updated */
 };
 
+#ifdef CONFIG_DRM_EXYNOS
+static struct exynos_drm_fimd_pdata drm_fimd_pdata = {
+	.panel = {
+		.timing	= {
+			.left_margin	= 16,
+			.right_margin	= 16,
+			.upper_margin	= 2,
+			.lower_margin	= 28,
+			.hsync_len	= 2,
+			.vsync_len	= 1,
+			.xres		= 480,
+			.yres		= 800,
+			.refresh	= 55,
+		},
+	},
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB |
+			  VIDCON0_CLKSEL_LCD,
+	.vidcon1	= VIDCON1_INV_VCLK | VIDCON1_INV_VDEN
+			  | VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+	.default_win	= 3,
+	.bpp		= 32,
+};
+#else
 /* Frame Buffer */
 static struct s3c_fb_pd_win universal_fb_win0 = {
 	.win_mode = {
@@ -837,6 +868,7 @@ static struct s3c_fb_platdata universal_lcd_pdata __initdata = {
 			  | VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
 	.setup_gpio	= exynos4_fimd0_gpio_setup_24bpp,
 };
+#endif
 
 static struct regulator_consumer_supply cam_vt_dio_supply =
 	REGULATOR_SUPPLY("vdd_core", "0-003c");
@@ -991,6 +1023,9 @@ static struct gpio universal_camera_gpios[] = {
 	{ GPIO_CAM_VGA_NSTBY,	GPIOF_OUT_INIT_LOW,  "CAM_VGA_NSTBY" },
 };
 
+/* USB OTG */
+static struct s3c_hsotg_plat universal_hsotg_pdata;
+
 static void __init universal_camera_init(void)
 {
 	s3c_set_platdata(&mipi_csis_platdata, sizeof(mipi_csis_platdata),
@@ -1046,6 +1081,10 @@ static struct platform_device *universal_devices[] __initdata = {
 	&s5p_device_onenand,
 	&s5p_device_fimd0,
 	&s5p_device_jpeg,
+#ifdef CONFIG_DRM_EXYNOS
+	&exynos_device_drm,
+#endif
+	&s3c_device_usb_hsotg,
 	&s5p_device_mfc,
 	&s5p_device_mfc_l,
 	&s5p_device_mfc_r,
@@ -1057,9 +1096,11 @@ static struct platform_device *universal_devices[] __initdata = {
 
 static void __init universal_map_io(void)
 {
+	clk_xusbxti.rate = 24000000;
 	exynos_init_io(NULL, 0);
 	s3c24xx_init_clocks(24000000);
 	s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs));
+	s5p_set_timer_source(S5P_PWM2, S5P_PWM4);
 }
 
 static void s5p_tv_setup(void)
@@ -1091,12 +1132,18 @@ static void __init universal_machine_init(void)
 	s5p_i2c_hdmiphy_set_platdata(NULL);
 	i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs));
 
+#ifdef CONFIG_DRM_EXYNOS
+	s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
+	exynos4_fimd0_gpio_setup_24bpp();
+#else
 	s5p_fimd0_set_platdata(&universal_lcd_pdata);
+#endif
 
 	universal_touchkey_init();
 	i2c_register_board_info(I2C_GPIO_BUS_12, i2c_gpio12_devs,
 			ARRAY_SIZE(i2c_gpio12_devs));
 
+	s3c_hsotg_set_platdata(&universal_hsotg_pdata);
 	universal_camera_init();
 
 	/* Last */
@@ -1110,7 +1157,8 @@ MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
 	.map_io		= universal_map_io,
 	.handle_irq	= gic_handle_irq,
 	.init_machine	= universal_machine_init,
-	.timer		= &exynos4_timer,
+	.init_late	= exynos_init_late,
+	.timer		= &s5p_timer,
 	.reserve        = &universal_reserve,
 	.restart	= exynos4_restart,
 MACHINE_END
diff --git a/arch/arm/mach-exynos/mct.c b/arch/arm/mach-exynos/mct.c
index 897d9a9cf226..b601fb8a408b 100644
--- a/arch/arm/mach-exynos/mct.c
+++ b/arch/arm/mach-exynos/mct.c
@@ -388,6 +388,7 @@ static int __cpuinit exynos4_local_timer_setup(struct clock_event_device *evt)
 {
 	struct mct_clock_event_device *mevt;
 	unsigned int cpu = smp_processor_id();
+	int mct_lx_irq;
 
 	mevt = this_cpu_ptr(&percpu_mct_tick);
 	mevt->evt = evt;
@@ -414,14 +415,18 @@ static int __cpuinit exynos4_local_timer_setup(struct clock_event_device *evt)
 
 	if (mct_int_type == MCT_INT_SPI) {
 		if (cpu == 0) {
+			mct_lx_irq = soc_is_exynos4210() ? EXYNOS4_IRQ_MCT_L0 :
+						EXYNOS5_IRQ_MCT_L0;
 			mct_tick0_event_irq.dev_id = mevt;
-			evt->irq = EXYNOS4_IRQ_MCT_L0;
-			setup_irq(EXYNOS4_IRQ_MCT_L0, &mct_tick0_event_irq);
+			evt->irq = mct_lx_irq;
+			setup_irq(mct_lx_irq, &mct_tick0_event_irq);
 		} else {
+			mct_lx_irq = soc_is_exynos4210() ? EXYNOS4_IRQ_MCT_L1 :
+						EXYNOS5_IRQ_MCT_L1;
 			mct_tick1_event_irq.dev_id = mevt;
-			evt->irq = EXYNOS4_IRQ_MCT_L1;
-			setup_irq(EXYNOS4_IRQ_MCT_L1, &mct_tick1_event_irq);
-			irq_set_affinity(EXYNOS4_IRQ_MCT_L1, cpumask_of(1));
+			evt->irq = mct_lx_irq;
+			setup_irq(mct_lx_irq, &mct_tick1_event_irq);
+			irq_set_affinity(mct_lx_irq, cpumask_of(1));
 		}
 	} else {
 		enable_percpu_irq(EXYNOS_IRQ_MCT_LOCALTIMER, 0);
@@ -473,7 +478,7 @@ static void __init exynos4_timer_resources(void)
 
 static void __init exynos4_timer_init(void)
 {
-	if (soc_is_exynos4210())
+	if ((soc_is_exynos4210()) || (soc_is_exynos5250()))
 		mct_int_type = MCT_INT_SPI;
 	else
 		mct_int_type = MCT_INT_PPI;
diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
index 428cfeb57724..c06c992943a1 100644
--- a/arch/arm/mach-exynos/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@@ -1,9 +1,8 @@
-/* linux/arch/arm/mach-exynos4/pm.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+/*
+ * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  *
- * EXYNOS4210 - Power Management support
+ * EXYNOS - Power Management support
  *
  * Based on arch/arm/mach-s3c2410/pm.c
  * Copyright (c) 2006 Simtec Electronics
@@ -63,90 +62,7 @@ static struct sleep_save exynos4_vpll_save[] = {
 	SAVE_ITEM(EXYNOS4_VPLL_CON1),
 };
 
-static struct sleep_save exynos4_core_save[] = {
-	/* GIC side */
-	SAVE_ITEM(S5P_VA_GIC_CPU + 0x000),
-	SAVE_ITEM(S5P_VA_GIC_CPU + 0x004),
-	SAVE_ITEM(S5P_VA_GIC_CPU + 0x008),
-	SAVE_ITEM(S5P_VA_GIC_CPU + 0x00C),
-	SAVE_ITEM(S5P_VA_GIC_CPU + 0x014),
-	SAVE_ITEM(S5P_VA_GIC_CPU + 0x018),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x000),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x004),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x100),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x104),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x108),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x300),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x304),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x308),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x400),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x404),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x408),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x40C),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x410),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x414),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x418),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x41C),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x420),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x424),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x428),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x42C),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x430),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x434),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x438),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x43C),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x440),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x444),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x448),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x44C),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x450),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x454),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x458),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x45C),
-
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x800),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x804),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x808),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x80C),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x810),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x814),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x818),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x81C),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x820),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x824),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x828),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x82C),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x830),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x834),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x838),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x83C),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x840),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x844),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x848),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x84C),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x850),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x854),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x858),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x85C),
-
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0xC00),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0xC04),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0xC08),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0xC0C),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0xC10),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0xC14),
-
-	SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x000),
-	SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x010),
-	SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x020),
-	SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x030),
-	SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x040),
-	SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x050),
-	SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x060),
-	SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x070),
-	SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x080),
-	SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x090),
-
+static struct sleep_save exynos_core_save[] = {
 	/* SROM side */
 	SAVE_ITEM(S5P_SROM_BW),
 	SAVE_ITEM(S5P_SROM_BC0),
@@ -159,9 +75,11 @@ static struct sleep_save exynos4_core_save[] = {
 /* For Cortex-A9 Diagnostic and Power control register */
 static unsigned int save_arm_register[2];
 
-static int exynos4_cpu_suspend(unsigned long arg)
+static int exynos_cpu_suspend(unsigned long arg)
 {
+#ifdef CONFIG_CACHE_L2X0
 	outer_flush_all();
+#endif
 
 	/* issue the standby signal into the pm unit. */
 	cpu_do_idle();
@@ -170,19 +88,25 @@ static int exynos4_cpu_suspend(unsigned long arg)
 	panic("sleep resumed to originator?");
 }
 
-static void exynos4_pm_prepare(void)
+static void exynos_pm_prepare(void)
 {
-	u32 tmp;
+	unsigned int tmp;
 
-	s3c_pm_do_save(exynos4_core_save, ARRAY_SIZE(exynos4_core_save));
-	s3c_pm_do_save(exynos4_epll_save, ARRAY_SIZE(exynos4_epll_save));
-	s3c_pm_do_save(exynos4_vpll_save, ARRAY_SIZE(exynos4_vpll_save));
+	s3c_pm_do_save(exynos_core_save, ARRAY_SIZE(exynos_core_save));
 
-	tmp = __raw_readl(S5P_INFORM1);
+	if (!soc_is_exynos5250()) {
+		s3c_pm_do_save(exynos4_epll_save, ARRAY_SIZE(exynos4_epll_save));
+		s3c_pm_do_save(exynos4_vpll_save, ARRAY_SIZE(exynos4_vpll_save));
+	} else {
+		/* Disable USE_RETENTION of JPEG_MEM_OPTION */
+		tmp = __raw_readl(EXYNOS5_JPEG_MEM_OPTION);
+		tmp &= ~EXYNOS5_OPTION_USE_RETENTION;
+		__raw_writel(tmp, EXYNOS5_JPEG_MEM_OPTION);
+	}
 
 	/* Set value of power down register for sleep mode */
 
-	exynos4_sys_powerdown_conf(SYS_SLEEP);
+	exynos_sys_powerdown_conf(SYS_SLEEP);
 	__raw_writel(S5P_CHECK_SLEEP, S5P_INFORM1);
 
 	/* ensure at least INFORM0 has the resume address */
@@ -191,17 +115,18 @@ static void exynos4_pm_prepare(void)
 
 	/* Before enter central sequence mode, clock src register have to set */
 
-	s3c_pm_do_restore_core(exynos4_set_clksrc, ARRAY_SIZE(exynos4_set_clksrc));
+	if (!soc_is_exynos5250())
+		s3c_pm_do_restore_core(exynos4_set_clksrc, ARRAY_SIZE(exynos4_set_clksrc));
 
 	if (soc_is_exynos4210())
 		s3c_pm_do_restore_core(exynos4210_set_clksrc, ARRAY_SIZE(exynos4210_set_clksrc));
 
 }
 
-static int exynos4_pm_add(struct device *dev, struct subsys_interface *sif)
+static int exynos_pm_add(struct device *dev, struct subsys_interface *sif)
 {
-	pm_cpu_prep = exynos4_pm_prepare;
-	pm_cpu_sleep = exynos4_cpu_suspend;
+	pm_cpu_prep = exynos_pm_prepare;
+	pm_cpu_sleep = exynos_cpu_suspend;
 
 	return 0;
 }
@@ -273,13 +198,13 @@ static void exynos4_restore_pll(void)
 	} while (epll_wait || vpll_wait);
 }
 
-static struct subsys_interface exynos4_pm_interface = {
-	.name		= "exynos4_pm",
-	.subsys		= &exynos4_subsys,
-	.add_dev	= exynos4_pm_add,
+static struct subsys_interface exynos_pm_interface = {
+	.name		= "exynos_pm",
+	.subsys		= &exynos_subsys,
+	.add_dev	= exynos_pm_add,
 };
 
-static __init int exynos4_pm_drvinit(void)
+static __init int exynos_pm_drvinit(void)
 {
 	struct clk *pll_base;
 	unsigned int tmp;
@@ -292,18 +217,20 @@ static __init int exynos4_pm_drvinit(void)
 	tmp |= ((0xFF << 8) | (0x1F << 1));
 	__raw_writel(tmp, S5P_WAKEUP_MASK);
 
-	pll_base = clk_get(NULL, "xtal");
+	if (!soc_is_exynos5250()) {
+		pll_base = clk_get(NULL, "xtal");
 
-	if (!IS_ERR(pll_base)) {
-		pll_base_rate = clk_get_rate(pll_base);
-		clk_put(pll_base);
+		if (!IS_ERR(pll_base)) {
+			pll_base_rate = clk_get_rate(pll_base);
+			clk_put(pll_base);
+		}
 	}
 
-	return subsys_interface_register(&exynos4_pm_interface);
+	return subsys_interface_register(&exynos_pm_interface);
 }
-arch_initcall(exynos4_pm_drvinit);
+arch_initcall(exynos_pm_drvinit);
 
-static int exynos4_pm_suspend(void)
+static int exynos_pm_suspend(void)
 {
 	unsigned long tmp;
 
@@ -313,27 +240,27 @@ static int exynos4_pm_suspend(void)
 	tmp &= ~S5P_CENTRAL_LOWPWR_CFG;
 	__raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
 
-	if (soc_is_exynos4212()) {
-		tmp = __raw_readl(S5P_CENTRAL_SEQ_OPTION);
-		tmp &= ~(S5P_USE_STANDBYWFI_ISP_ARM |
-			 S5P_USE_STANDBYWFE_ISP_ARM);
-		__raw_writel(tmp, S5P_CENTRAL_SEQ_OPTION);
-	}
+	/* Setting SEQ_OPTION register */
+
+	tmp = (S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFE0);
+	__raw_writel(tmp, S5P_CENTRAL_SEQ_OPTION);
 
-	/* Save Power control register */
-	asm ("mrc p15, 0, %0, c15, c0, 0"
-	     : "=r" (tmp) : : "cc");
-	save_arm_register[0] = tmp;
+	if (!soc_is_exynos5250()) {
+		/* Save Power control register */
+		asm ("mrc p15, 0, %0, c15, c0, 0"
+		     : "=r" (tmp) : : "cc");
+		save_arm_register[0] = tmp;
 
-	/* Save Diagnostic register */
-	asm ("mrc p15, 0, %0, c15, c0, 1"
-	     : "=r" (tmp) : : "cc");
-	save_arm_register[1] = tmp;
+		/* Save Diagnostic register */
+		asm ("mrc p15, 0, %0, c15, c0, 1"
+		     : "=r" (tmp) : : "cc");
+		save_arm_register[1] = tmp;
+	}
 
 	return 0;
 }
 
-static void exynos4_pm_resume(void)
+static void exynos_pm_resume(void)
 {
 	unsigned long tmp;
 
@@ -350,17 +277,19 @@ static void exynos4_pm_resume(void)
 		/* No need to perform below restore code */
 		goto early_wakeup;
 	}
-	/* Restore Power control register */
-	tmp = save_arm_register[0];
-	asm volatile ("mcr p15, 0, %0, c15, c0, 0"
-		      : : "r" (tmp)
-		      : "cc");
-
-	/* Restore Diagnostic register */
-	tmp = save_arm_register[1];
-	asm volatile ("mcr p15, 0, %0, c15, c0, 1"
-		      : : "r" (tmp)
-		      : "cc");
+	if (!soc_is_exynos5250()) {
+		/* Restore Power control register */
+		tmp = save_arm_register[0];
+		asm volatile ("mcr p15, 0, %0, c15, c0, 0"
+			      : : "r" (tmp)
+			      : "cc");
+
+		/* Restore Diagnostic register */
+		tmp = save_arm_register[1];
+		asm volatile ("mcr p15, 0, %0, c15, c0, 1"
+			      : : "r" (tmp)
+			      : "cc");
+	}
 
 	/* For release retention */
 
@@ -372,26 +301,28 @@ static void exynos4_pm_resume(void)
 	__raw_writel((1 << 28), S5P_PAD_RET_EBIA_OPTION);
 	__raw_writel((1 << 28), S5P_PAD_RET_EBIB_OPTION);
 
-	s3c_pm_do_restore_core(exynos4_core_save, ARRAY_SIZE(exynos4_core_save));
+	s3c_pm_do_restore_core(exynos_core_save, ARRAY_SIZE(exynos_core_save));
 
-	exynos4_restore_pll();
+	if (!soc_is_exynos5250()) {
+		exynos4_restore_pll();
 
 #ifdef CONFIG_SMP
-	scu_enable(S5P_VA_SCU);
+		scu_enable(S5P_VA_SCU);
 #endif
+	}
 
 early_wakeup:
 	return;
 }
 
-static struct syscore_ops exynos4_pm_syscore_ops = {
-	.suspend	= exynos4_pm_suspend,
-	.resume		= exynos4_pm_resume,
+static struct syscore_ops exynos_pm_syscore_ops = {
+	.suspend	= exynos_pm_suspend,
+	.resume		= exynos_pm_resume,
 };
 
-static __init int exynos4_pm_syscore_init(void)
+static __init int exynos_pm_syscore_init(void)
 {
-	register_syscore_ops(&exynos4_pm_syscore_ops);
+	register_syscore_ops(&exynos_pm_syscore_ops);
 	return 0;
 }
-arch_initcall(exynos4_pm_syscore_init);
+arch_initcall(exynos_pm_syscore_init);
diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c
index 13b306808b42..e9fafcf163de 100644
--- a/arch/arm/mach-exynos/pm_domains.c
+++ b/arch/arm/mach-exynos/pm_domains.c
@@ -193,9 +193,8 @@ static __init int exynos4_pm_init_power_domain(void)
 }
 arch_initcall(exynos4_pm_init_power_domain);
 
-static __init int exynos_pm_late_initcall(void)
+int __init exynos_pm_late_initcall(void)
 {
 	pm_genpd_poweroff_unused();
 	return 0;
 }
-late_initcall(exynos_pm_late_initcall);
diff --git a/arch/arm/mach-exynos/pmu.c b/arch/arm/mach-exynos/pmu.c
index bba48f5c3e8f..4aacb66f7161 100644
--- a/arch/arm/mach-exynos/pmu.c
+++ b/arch/arm/mach-exynos/pmu.c
@@ -1,9 +1,8 @@
-/* linux/arch/arm/mach-exynos4/pmu.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+/*
+ * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com/
  *
- * EXYNOS4210 - CPU PMU(Power Management Unit) support
+ * EXYNOS - CPU PMU(Power Management Unit) support
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -12,13 +11,14 @@
 
 #include <linux/io.h>
 #include <linux/kernel.h>
+#include <linux/bug.h>
 
 #include <mach/regs-clock.h>
 #include <mach/pmu.h>
 
-static struct exynos4_pmu_conf *exynos4_pmu_config;
+static struct exynos_pmu_conf *exynos_pmu_config;
 
-static struct exynos4_pmu_conf exynos4210_pmu_config[] = {
+static struct exynos_pmu_conf exynos4210_pmu_config[] = {
 	/* { .reg = address, .val = { AFTR, LPA, SLEEP } */
 	{ S5P_ARM_CORE0_LOWPWR,			{ 0x0, 0x0, 0x2 } },
 	{ S5P_DIS_IRQ_CORE0,			{ 0x0, 0x0, 0x0 } },
@@ -94,7 +94,7 @@ static struct exynos4_pmu_conf exynos4210_pmu_config[] = {
 	{ PMU_TABLE_END,},
 };
 
-static struct exynos4_pmu_conf exynos4212_pmu_config[] = {
+static struct exynos_pmu_conf exynos4x12_pmu_config[] = {
 	{ S5P_ARM_CORE0_LOWPWR,			{ 0x0, 0x0, 0x2 } },
 	{ S5P_DIS_IRQ_CORE0,			{ 0x0, 0x0, 0x0 } },
 	{ S5P_DIS_IRQ_CENTRAL0,			{ 0x0, 0x0, 0x0 } },
@@ -202,29 +202,209 @@ static struct exynos4_pmu_conf exynos4212_pmu_config[] = {
 	{ PMU_TABLE_END,},
 };
 
-void exynos4_sys_powerdown_conf(enum sys_powerdown mode)
+static struct exynos_pmu_conf exynos4412_pmu_config[] = {
+	{ S5P_ARM_CORE2_LOWPWR,			{ 0x0, 0x0, 0x2 } },
+	{ S5P_DIS_IRQ_CORE2,			{ 0x0, 0x0, 0x0 } },
+	{ S5P_DIS_IRQ_CENTRAL2,			{ 0x0, 0x0, 0x0 } },
+	{ S5P_ARM_CORE3_LOWPWR,			{ 0x0, 0x0, 0x2 } },
+	{ S5P_DIS_IRQ_CORE3,			{ 0x0, 0x0, 0x0 } },
+	{ S5P_DIS_IRQ_CENTRAL3,			{ 0x0, 0x0, 0x0 } },
+	{ PMU_TABLE_END,},
+};
+
+static struct exynos_pmu_conf exynos5250_pmu_config[] = {
+	/* { .reg = address, .val = { AFTR, LPA, SLEEP } */
+	{ EXYNOS5_ARM_CORE0_SYS_PWR_REG,		{ 0x0, 0x0, 0x2} },
+	{ EXYNOS5_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5_DIS_IRQ_ARM_CORE0_CENTRAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5_ARM_CORE1_SYS_PWR_REG,		{ 0x0, 0x0, 0x2} },
+	{ EXYNOS5_DIS_IRQ_ARM_CORE1_LOCAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5_DIS_IRQ_ARM_CORE1_CENTRAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5_FSYS_ARM_SYS_PWR_REG,			{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_DIS_IRQ_FSYS_ARM_CENTRAL_SYS_PWR_REG,	{ 0x1, 0x1, 0x1} },
+	{ EXYNOS5_ISP_ARM_SYS_PWR_REG,			{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_DIS_IRQ_ISP_ARM_LOCAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5_ARM_COMMON_SYS_PWR_REG,		{ 0x0, 0x0, 0x2} },
+	{ EXYNOS5_ARM_L2_SYS_PWR_REG,			{ 0x3, 0x3, 0x3} },
+	{ EXYNOS5_CMU_ACLKSTOP_SYS_PWR_REG,		{ 0x1, 0x0, 0x1} },
+	{ EXYNOS5_CMU_SCLKSTOP_SYS_PWR_REG,		{ 0x1, 0x0, 0x1} },
+	{ EXYNOS5_CMU_RESET_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
+	{ EXYNOS5_CMU_ACLKSTOP_SYSMEM_SYS_PWR_REG,	{ 0x1, 0x0, 0x1} },
+	{ EXYNOS5_CMU_SCLKSTOP_SYSMEM_SYS_PWR_REG,	{ 0x1, 0x0, 0x1} },
+	{ EXYNOS5_CMU_RESET_SYSMEM_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
+	{ EXYNOS5_DRAM_FREQ_DOWN_SYS_PWR_REG,		{ 0x1, 0x1, 0x1} },
+	{ EXYNOS5_DDRPHY_DLLOFF_SYS_PWR_REG,		{ 0x1, 0x1, 0x1} },
+	{ EXYNOS5_DDRPHY_DLLLOCK_SYS_PWR_REG,		{ 0x1, 0x1, 0x1} },
+	{ EXYNOS5_APLL_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_MPLL_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_VPLL_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_EPLL_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
+	{ EXYNOS5_BPLL_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_CPLL_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_MPLLUSER_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_BPLLUSER_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_TOP_BUS_SYS_PWR_REG,			{ 0x3, 0x0, 0x0} },
+	{ EXYNOS5_TOP_RETENTION_SYS_PWR_REG,		{ 0x1, 0x0, 0x1} },
+	{ EXYNOS5_TOP_PWR_SYS_PWR_REG,			{ 0x3, 0x0, 0x3} },
+	{ EXYNOS5_TOP_BUS_SYSMEM_SYS_PWR_REG,		{ 0x3, 0x0, 0x0} },
+	{ EXYNOS5_TOP_RETENTION_SYSMEM_SYS_PWR_REG,	{ 0x1, 0x0, 0x1} },
+	{ EXYNOS5_TOP_PWR_SYSMEM_SYS_PWR_REG,		{ 0x3, 0x0, 0x3} },
+	{ EXYNOS5_LOGIC_RESET_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
+	{ EXYNOS5_OSCCLK_GATE_SYS_PWR_REG,		{ 0x1, 0x0, 0x1} },
+	{ EXYNOS5_LOGIC_RESET_SYSMEM_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
+	{ EXYNOS5_OSCCLK_GATE_SYSMEM_SYS_PWR_REG,	{ 0x1, 0x0, 0x1} },
+	{ EXYNOS5_USBOTG_MEM_SYS_PWR_REG,		{ 0x3, 0x0, 0x0} },
+	{ EXYNOS5_G2D_MEM_SYS_PWR_REG,			{ 0x3, 0x0, 0x0} },
+	{ EXYNOS5_USBDRD_MEM_SYS_PWR_REG,		{ 0x3, 0x0, 0x0} },
+	{ EXYNOS5_SDMMC_MEM_SYS_PWR_REG,		{ 0x3, 0x0, 0x0} },
+	{ EXYNOS5_CSSYS_MEM_SYS_PWR_REG,		{ 0x3, 0x0, 0x0} },
+	{ EXYNOS5_SECSS_MEM_SYS_PWR_REG,		{ 0x3, 0x0, 0x0} },
+	{ EXYNOS5_ROTATOR_MEM_SYS_PWR_REG,		{ 0x3, 0x0, 0x0} },
+	{ EXYNOS5_INTRAM_MEM_SYS_PWR_REG,		{ 0x3, 0x0, 0x0} },
+	{ EXYNOS5_INTROM_MEM_SYS_PWR_REG,		{ 0x3, 0x0, 0x0} },
+	{ EXYNOS5_JPEG_MEM_SYS_PWR_REG,			{ 0x3, 0x0, 0x0} },
+	{ EXYNOS5_HSI_MEM_SYS_PWR_REG,			{ 0x3, 0x0, 0x0} },
+	{ EXYNOS5_MCUIOP_MEM_SYS_PWR_REG,		{ 0x3, 0x0, 0x0} },
+	{ EXYNOS5_SATA_MEM_SYS_PWR_REG,			{ 0x3, 0x0, 0x0} },
+	{ EXYNOS5_PAD_RETENTION_DRAM_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_PAD_RETENTION_MAU_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
+	{ EXYNOS5_PAD_RETENTION_GPIO_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_PAD_RETENTION_UART_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_PAD_RETENTION_MMCA_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_PAD_RETENTION_MMCB_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_PAD_RETENTION_EBIA_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_PAD_RETENTION_EBIB_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_PAD_RETENTION_SPI_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_PAD_RETENTION_GPIO_SYSMEM_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_PAD_ISOLATION_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_PAD_ISOLATION_SYSMEM_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_PAD_ALV_SEL_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_XUSBXTI_SYS_PWR_REG,			{ 0x1, 0x1, 0x1} },
+	{ EXYNOS5_XXTI_SYS_PWR_REG,			{ 0x1, 0x1, 0x0} },
+	{ EXYNOS5_EXT_REGULATOR_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
+	{ EXYNOS5_GPIO_MODE_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_GPIO_MODE_SYSMEM_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_GPIO_MODE_MAU_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
+	{ EXYNOS5_TOP_ASB_RESET_SYS_PWR_REG,		{ 0x1, 0x1, 0x1} },
+	{ EXYNOS5_TOP_ASB_ISOLATION_SYS_PWR_REG,	{ 0x1, 0x0, 0x1} },
+	{ EXYNOS5_GSCL_SYS_PWR_REG,			{ 0x7, 0x0, 0x0} },
+	{ EXYNOS5_ISP_SYS_PWR_REG,			{ 0x7, 0x0, 0x0} },
+	{ EXYNOS5_MFC_SYS_PWR_REG,			{ 0x7, 0x0, 0x0} },
+	{ EXYNOS5_G3D_SYS_PWR_REG,			{ 0x7, 0x0, 0x0} },
+	{ EXYNOS5_DISP1_SYS_PWR_REG,			{ 0x7, 0x0, 0x0} },
+	{ EXYNOS5_MAU_SYS_PWR_REG,			{ 0x7, 0x7, 0x0} },
+	{ EXYNOS5_CMU_CLKSTOP_GSCL_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_CMU_CLKSTOP_ISP_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_CMU_CLKSTOP_MFC_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_CMU_CLKSTOP_G3D_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_CMU_CLKSTOP_DISP1_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_CMU_CLKSTOP_MAU_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
+	{ EXYNOS5_CMU_SYSCLK_GSCL_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_CMU_SYSCLK_ISP_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_CMU_SYSCLK_MFC_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_CMU_SYSCLK_G3D_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_CMU_SYSCLK_DISP1_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_CMU_SYSCLK_MAU_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
+	{ EXYNOS5_CMU_RESET_GSCL_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_CMU_RESET_ISP_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_CMU_RESET_MFC_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_CMU_RESET_G3D_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_CMU_RESET_DISP1_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_CMU_RESET_MAU_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
+	{ PMU_TABLE_END,},
+};
+
+void __iomem *exynos5_list_both_cnt_feed[] = {
+	EXYNOS5_ARM_CORE0_OPTION,
+	EXYNOS5_ARM_CORE1_OPTION,
+	EXYNOS5_ARM_COMMON_OPTION,
+	EXYNOS5_GSCL_OPTION,
+	EXYNOS5_ISP_OPTION,
+	EXYNOS5_MFC_OPTION,
+	EXYNOS5_G3D_OPTION,
+	EXYNOS5_DISP1_OPTION,
+	EXYNOS5_MAU_OPTION,
+	EXYNOS5_TOP_PWR_OPTION,
+	EXYNOS5_TOP_PWR_SYSMEM_OPTION,
+};
+
+void __iomem *exynos5_list_diable_wfi_wfe[] = {
+	EXYNOS5_ARM_CORE1_OPTION,
+	EXYNOS5_FSYS_ARM_OPTION,
+	EXYNOS5_ISP_ARM_OPTION,
+};
+
+static void exynos5_init_pmu(void)
 {
 	unsigned int i;
+	unsigned int tmp;
 
-	for (i = 0; (exynos4_pmu_config[i].reg != PMU_TABLE_END) ; i++)
-		__raw_writel(exynos4_pmu_config[i].val[mode],
-				exynos4_pmu_config[i].reg);
+	/*
+	 * Enable both SC_FEEDBACK and SC_COUNTER
+	 */
+	for (i = 0 ; i < ARRAY_SIZE(exynos5_list_both_cnt_feed) ; i++) {
+		tmp = __raw_readl(exynos5_list_both_cnt_feed[i]);
+		tmp |= (EXYNOS5_USE_SC_FEEDBACK |
+			EXYNOS5_USE_SC_COUNTER);
+		__raw_writel(tmp, exynos5_list_both_cnt_feed[i]);
+	}
+
+	/*
+	 * SKIP_DEACTIVATE_ACEACP_IN_PWDN_BITFIELD Enable
+	 * MANUAL_L2RSTDISABLE_CONTROL_BITFIELD Enable
+	 */
+	tmp = __raw_readl(EXYNOS5_ARM_COMMON_OPTION);
+	tmp |= (EXYNOS5_MANUAL_L2RSTDISABLE_CONTROL |
+		EXYNOS5_SKIP_DEACTIVATE_ACEACP_IN_PWDN);
+	__raw_writel(tmp, EXYNOS5_ARM_COMMON_OPTION);
+
+	/*
+	 * Disable WFI/WFE on XXX_OPTION
+	 */
+	for (i = 0 ; i < ARRAY_SIZE(exynos5_list_diable_wfi_wfe) ; i++) {
+		tmp = __raw_readl(exynos5_list_diable_wfi_wfe[i]);
+		tmp &= ~(EXYNOS5_OPTION_USE_STANDBYWFE |
+			 EXYNOS5_OPTION_USE_STANDBYWFI);
+		__raw_writel(tmp, exynos5_list_diable_wfi_wfe[i]);
+	}
+}
+
+void exynos_sys_powerdown_conf(enum sys_powerdown mode)
+{
+	unsigned int i;
+
+	if (soc_is_exynos5250())
+		exynos5_init_pmu();
+
+	for (i = 0; (exynos_pmu_config[i].reg != PMU_TABLE_END) ; i++)
+		__raw_writel(exynos_pmu_config[i].val[mode],
+				exynos_pmu_config[i].reg);
+
+	if (soc_is_exynos4412()) {
+		for (i = 0; exynos4412_pmu_config[i].reg != PMU_TABLE_END ; i++)
+			__raw_writel(exynos4412_pmu_config[i].val[mode],
+				exynos4412_pmu_config[i].reg);
+	}
 }
 
-static int __init exynos4_pmu_init(void)
+static int __init exynos_pmu_init(void)
 {
-	exynos4_pmu_config = exynos4210_pmu_config;
+	exynos_pmu_config = exynos4210_pmu_config;
 
 	if (soc_is_exynos4210()) {
-		exynos4_pmu_config = exynos4210_pmu_config;
+		exynos_pmu_config = exynos4210_pmu_config;
 		pr_info("EXYNOS4210 PMU Initialize\n");
-	} else if (soc_is_exynos4212()) {
-		exynos4_pmu_config = exynos4212_pmu_config;
-		pr_info("EXYNOS4212 PMU Initialize\n");
+	} else if (soc_is_exynos4212() || soc_is_exynos4412()) {
+		exynos_pmu_config = exynos4x12_pmu_config;
+		pr_info("EXYNOS4x12 PMU Initialize\n");
+	} else if (soc_is_exynos5250()) {
+		exynos_pmu_config = exynos5250_pmu_config;
+		pr_info("EXYNOS5250 PMU Initialize\n");
 	} else {
-		pr_info("EXYNOS4: PMU not supported\n");
+		pr_info("EXYNOS: PMU not supported\n");
 	}
 
 	return 0;
 }
-arch_initcall(exynos4_pmu_init);
+arch_initcall(exynos_pmu_init);
diff --git a/arch/arm/mach-exynos/setup-usb-phy.c b/arch/arm/mach-exynos/setup-usb-phy.c
index 41743d21e8c6..1af0a7f44e00 100644
--- a/arch/arm/mach-exynos/setup-usb-phy.c
+++ b/arch/arm/mach-exynos/setup-usb-phy.c
@@ -26,11 +26,71 @@ static int exynos4_usb_host_phy_is_on(void)
 	return (readl(EXYNOS4_PHYPWR) & PHY1_STD_ANALOG_POWERDOWN) ? 0 : 1;
 }
 
-static int exynos4_usb_phy1_init(struct platform_device *pdev)
+static void exynos4210_usb_phy_clkset(struct platform_device *pdev)
 {
-	struct clk *otg_clk;
 	struct clk *xusbxti_clk;
 	u32 phyclk;
+
+	/* set clock frequency for PLL */
+	phyclk = readl(EXYNOS4_PHYCLK) & ~CLKSEL_MASK;
+
+	xusbxti_clk = clk_get(&pdev->dev, "xusbxti");
+	if (xusbxti_clk && !IS_ERR(xusbxti_clk)) {
+		switch (clk_get_rate(xusbxti_clk)) {
+		case 12 * MHZ:
+			phyclk |= CLKSEL_12M;
+			break;
+		case 24 * MHZ:
+			phyclk |= CLKSEL_24M;
+			break;
+		default:
+		case 48 * MHZ:
+			/* default reference clock */
+			break;
+		}
+		clk_put(xusbxti_clk);
+	}
+
+	writel(phyclk, EXYNOS4_PHYCLK);
+}
+
+static int exynos4210_usb_phy0_init(struct platform_device *pdev)
+{
+	u32 rstcon;
+
+	writel(readl(S5P_USBDEVICE_PHY_CONTROL) | S5P_USBDEVICE_PHY_ENABLE,
+			S5P_USBDEVICE_PHY_CONTROL);
+
+	exynos4210_usb_phy_clkset(pdev);
+
+	/* set to normal PHY0 */
+	writel((readl(EXYNOS4_PHYPWR) & ~PHY0_NORMAL_MASK), EXYNOS4_PHYPWR);
+
+	/* reset PHY0 and Link */
+	rstcon = readl(EXYNOS4_RSTCON) | PHY0_SWRST_MASK;
+	writel(rstcon, EXYNOS4_RSTCON);
+	udelay(10);
+
+	rstcon &= ~PHY0_SWRST_MASK;
+	writel(rstcon, EXYNOS4_RSTCON);
+
+	return 0;
+}
+
+static int exynos4210_usb_phy0_exit(struct platform_device *pdev)
+{
+	writel((readl(EXYNOS4_PHYPWR) | PHY0_ANALOG_POWERDOWN |
+				PHY0_OTG_DISABLE), EXYNOS4_PHYPWR);
+
+	writel(readl(S5P_USBDEVICE_PHY_CONTROL) & ~S5P_USBDEVICE_PHY_ENABLE,
+			S5P_USBDEVICE_PHY_CONTROL);
+
+	return 0;
+}
+
+static int exynos4210_usb_phy1_init(struct platform_device *pdev)
+{
+	struct clk *otg_clk;
 	u32 rstcon;
 	int err;
 
@@ -54,27 +114,7 @@ static int exynos4_usb_phy1_init(struct platform_device *pdev)
 	writel(readl(S5P_USBHOST_PHY_CONTROL) | S5P_USBHOST_PHY_ENABLE,
 			S5P_USBHOST_PHY_CONTROL);
 
-	/* set clock frequency for PLL */
-	phyclk = readl(EXYNOS4_PHYCLK) & ~CLKSEL_MASK;
-
-	xusbxti_clk = clk_get(&pdev->dev, "xusbxti");
-	if (xusbxti_clk && !IS_ERR(xusbxti_clk)) {
-		switch (clk_get_rate(xusbxti_clk)) {
-		case 12 * MHZ:
-			phyclk |= CLKSEL_12M;
-			break;
-		case 24 * MHZ:
-			phyclk |= CLKSEL_24M;
-			break;
-		default:
-		case 48 * MHZ:
-			/* default reference clock */
-			break;
-		}
-		clk_put(xusbxti_clk);
-	}
-
-	writel(phyclk, EXYNOS4_PHYCLK);
+	exynos4210_usb_phy_clkset(pdev);
 
 	/* floating prevention logic: disable */
 	writel((readl(EXYNOS4_PHY1CON) | FPENABLEN), EXYNOS4_PHY1CON);
@@ -102,7 +142,7 @@ static int exynos4_usb_phy1_init(struct platform_device *pdev)
 	return 0;
 }
 
-static int exynos4_usb_phy1_exit(struct platform_device *pdev)
+static int exynos4210_usb_phy1_exit(struct platform_device *pdev)
 {
 	struct clk *otg_clk;
 	int err;
@@ -136,16 +176,20 @@ static int exynos4_usb_phy1_exit(struct platform_device *pdev)
 
 int s5p_usb_phy_init(struct platform_device *pdev, int type)
 {
-	if (type == S5P_USB_PHY_HOST)
-		return exynos4_usb_phy1_init(pdev);
+	if (type == S5P_USB_PHY_DEVICE)
+		return exynos4210_usb_phy0_init(pdev);
+	else if (type == S5P_USB_PHY_HOST)
+		return exynos4210_usb_phy1_init(pdev);
 
 	return -EINVAL;
 }
 
 int s5p_usb_phy_exit(struct platform_device *pdev, int type)
 {
-	if (type == S5P_USB_PHY_HOST)
-		return exynos4_usb_phy1_exit(pdev);
+	if (type == S5P_USB_PHY_DEVICE)
+		return exynos4210_usb_phy0_exit(pdev);
+	else if (type == S5P_USB_PHY_HOST)
+		return exynos4210_usb_phy1_exit(pdev);
 
 	return -EINVAL;
 }
diff --git a/arch/arm/mach-footbridge/cats-pci.c b/arch/arm/mach-footbridge/cats-pci.c
index 32321f66dec4..5cec2567c9c5 100644
--- a/arch/arm/mach-footbridge/cats-pci.c
+++ b/arch/arm/mach-footbridge/cats-pci.c
@@ -16,6 +16,11 @@
 /* cats host-specific stuff */
 static int irqmap_cats[] __initdata = { IRQ_PCI, IRQ_IN0, IRQ_IN1, IRQ_IN3 };
 
+static u8 cats_no_swizzle(struct pci_dev *dev, u8 *pin)
+{
+	return 0;
+}
+
 static int __init cats_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
 	if (dev->irq >= 255)
@@ -39,11 +44,11 @@ static int __init cats_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
  * cards being used (ie, pci-pci bridge based cards)?
  */
 static struct hw_pci cats_pci __initdata = {
-	.swizzle		= NULL,
+	.swizzle		= cats_no_swizzle,
 	.map_irq		= cats_map_irq,
 	.nr_controllers		= 1,
+	.ops			= &dc21285_ops,
 	.setup			= dc21285_setup,
-	.scan			= dc21285_scan_bus,
 	.preinit		= dc21285_preinit,
 	.postinit		= dc21285_postinit,
 };
diff --git a/arch/arm/mach-footbridge/dc21285.c b/arch/arm/mach-footbridge/dc21285.c
index e17e11de4f5e..9d62e3381024 100644
--- a/arch/arm/mach-footbridge/dc21285.c
+++ b/arch/arm/mach-footbridge/dc21285.c
@@ -129,7 +129,7 @@ dc21285_write_config(struct pci_bus *bus, unsigned int devfn, int where,
 	return PCIBIOS_SUCCESSFUL;
 }
 
-static struct pci_ops dc21285_ops = {
+struct pci_ops dc21285_ops = {
 	.read	= dc21285_read_config,
 	.write	= dc21285_write_config,
 };
@@ -284,11 +284,6 @@ int __init dc21285_setup(int nr, struct pci_sys_data *sys)
 	return 1;
 }
 
-struct pci_bus * __init dc21285_scan_bus(int nr, struct pci_sys_data *sys)
-{
-	return pci_scan_root_bus(NULL, 0, &dc21285_ops, sys, &sys->resources);
-}
-
 #define dc21285_request_irq(_a, _b, _c, _d, _e) \
 	WARN_ON(request_irq(_a, _b, _c, _d, _e) < 0)
 
diff --git a/arch/arm/mach-footbridge/ebsa285-pci.c b/arch/arm/mach-footbridge/ebsa285-pci.c
index 511c673ffa9d..fd12d8a36dc5 100644
--- a/arch/arm/mach-footbridge/ebsa285-pci.c
+++ b/arch/arm/mach-footbridge/ebsa285-pci.c
@@ -29,11 +29,10 @@ static int __init ebsa285_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 }
 
 static struct hw_pci ebsa285_pci __initdata = {
-	.swizzle		= pci_std_swizzle,
 	.map_irq		= ebsa285_map_irq,
 	.nr_controllers		= 1,
+	.ops			= &dc21285_ops,
 	.setup			= dc21285_setup,
-	.scan			= dc21285_scan_bus,
 	.preinit		= dc21285_preinit,
 	.postinit		= dc21285_postinit,
 };
diff --git a/arch/arm/mach-footbridge/netwinder-pci.c b/arch/arm/mach-footbridge/netwinder-pci.c
index 62187610e17e..0fba5134e4fe 100644
--- a/arch/arm/mach-footbridge/netwinder-pci.c
+++ b/arch/arm/mach-footbridge/netwinder-pci.c
@@ -43,11 +43,10 @@ static int __init netwinder_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 }
 
 static struct hw_pci netwinder_pci __initdata = {
-	.swizzle		= pci_std_swizzle,
 	.map_irq		= netwinder_map_irq,
 	.nr_controllers		= 1,
+	.ops			= &dc21285_ops,
 	.setup			= dc21285_setup,
-	.scan			= dc21285_scan_bus,
 	.preinit		= dc21285_preinit,
 	.postinit		= dc21285_postinit,
 };
diff --git a/arch/arm/mach-footbridge/personal-pci.c b/arch/arm/mach-footbridge/personal-pci.c
index aeb651d914a6..5c9ee54613b2 100644
--- a/arch/arm/mach-footbridge/personal-pci.c
+++ b/arch/arm/mach-footbridge/personal-pci.c
@@ -41,8 +41,8 @@ static int __init personal_server_map_irq(const struct pci_dev *dev, u8 slot,
 static struct hw_pci personal_server_pci __initdata = {
 	.map_irq		= personal_server_map_irq,
 	.nr_controllers		= 1,
+	.ops			= &dc21285_ops,
 	.setup			= dc21285_setup,
-	.scan			= dc21285_scan_bus,
 	.preinit		= dc21285_preinit,
 	.postinit		= dc21285_postinit,
 };
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 7561eca131b0..0021f726b153 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -34,6 +34,7 @@ config ARCH_MX53
 config SOC_IMX1
 	bool
 	select ARCH_MX1
+	select COMMON_CLK
 	select CPU_ARM920T
 	select IMX_HAVE_IOMUX_V1
 	select MXC_AVIC
@@ -42,12 +43,14 @@ config SOC_IMX21
 	bool
 	select MACH_MX21
 	select CPU_ARM926T
+	select COMMON_CLK
 	select IMX_HAVE_IOMUX_V1
 	select MXC_AVIC
 
 config SOC_IMX25
 	bool
 	select ARCH_MX25
+	select COMMON_CLK
 	select CPU_ARM926T
 	select ARCH_MXC_IOMUX_V3
 	select MXC_AVIC
@@ -56,6 +59,7 @@ config SOC_IMX27
 	bool
 	select MACH_MX27
 	select CPU_ARM926T
+	select COMMON_CLK
 	select IMX_HAVE_IOMUX_V1
 	select MXC_AVIC
 
@@ -64,12 +68,14 @@ config SOC_IMX31
 	select CPU_V6
 	select IMX_HAVE_PLATFORM_MXC_RNGA
 	select MXC_AVIC
+	select COMMON_CLK
 	select SMP_ON_UP if SMP
 
 config SOC_IMX35
 	bool
 	select CPU_V6
 	select ARCH_MXC_IOMUX_V3
+	select COMMON_CLK
 	select HAVE_EPIT
 	select MXC_AVIC
 	select SMP_ON_UP if SMP
@@ -77,6 +83,7 @@ config SOC_IMX35
 config SOC_IMX5
 	select CPU_V7
 	select MXC_TZIC
+	select COMMON_CLK
 	select ARCH_MXC_IOMUX_V3
 	select ARCH_HAS_CPUFREQ
 	select ARCH_MX5
@@ -151,6 +158,7 @@ config MACH_MX25_3DS
 	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMXDI_RTC
 	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_SSI
 	select IMX_HAVE_PLATFORM_IMX_FB
 	select IMX_HAVE_PLATFORM_IMX_KEYPAD
 	select IMX_HAVE_PLATFORM_IMX_UART
@@ -163,6 +171,7 @@ config MACH_EUKREA_CPUIMX25SD
 	select SOC_IMX25
 	select IMX_HAVE_PLATFORM_FLEXCAN
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMXDI_RTC
 	select IMX_HAVE_PLATFORM_IMX_FB
 	select IMX_HAVE_PLATFORM_IMX_I2C
@@ -181,6 +190,7 @@ config MACH_EUKREA_MBIMXSD25_BASEBOARD
 	bool "Eukrea MBIMXSD development board"
 	select IMX_HAVE_PLATFORM_GPIO_KEYS
 	select IMX_HAVE_PLATFORM_IMX_SSI
+	select IMX_HAVE_PLATFORM_SPI_IMX
 	select LEDS_GPIO_REGISTER
 	help
 	  This adds board specific devices that can be found on Eukrea's
@@ -493,6 +503,7 @@ config MACH_MX31MOBOARD
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_SSI
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_IPU_CORE
 	select IMX_HAVE_PLATFORM_MXC_EHCI
@@ -571,8 +582,10 @@ config MACH_MX35_3DS
 	select MXC_DEBUG_BOARD
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_FB
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IPU_CORE
 	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
@@ -606,6 +619,7 @@ config MACH_EUKREA_MBIMXSD35_BASEBOARD
 	select IMX_HAVE_PLATFORM_GPIO_KEYS
 	select IMX_HAVE_PLATFORM_IMX_SSI
 	select IMX_HAVE_PLATFORM_IPU_CORE
+	select IMX_HAVE_PLATFORM_SPI_IMX
 	select LEDS_GPIO_REGISTER
 	help
 	  This adds board specific devices that can be found on Eukrea's
@@ -682,42 +696,13 @@ config MACH_MX51_3DS
 	  Include support for MX51PDK (3DS) platform. This includes specific
 	  configurations for the board and its peripherals.
 
-config MACH_EUKREA_CPUIMX51
-	bool "Support Eukrea CPUIMX51 module"
-	select SOC_IMX51
-	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_MXC_NAND
-	select IMX_HAVE_PLATFORM_SPI_IMX
-	help
-	  Include support for Eukrea CPUIMX51 platform. This includes
-	  specific configurations for the module and its peripherals.
-
-choice
-	prompt "Baseboard"
-	depends on MACH_EUKREA_CPUIMX51
-	default MACH_EUKREA_MBIMX51_BASEBOARD
-
-config MACH_EUKREA_MBIMX51_BASEBOARD
-	prompt "Eukrea MBIMX51 development board"
-	bool
-	select IMX_HAVE_PLATFORM_IMX_KEYPAD
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select LEDS_GPIO_REGISTER
-	help
-	  This adds board specific devices that can be found on Eukrea's
-	  MBIMX51 evaluation board.
-
-endchoice
-
 config MACH_EUKREA_CPUIMX51SD
 	bool "Support Eukrea CPUIMX51SD module"
 	select SOC_IMX51
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_SPI_IMX
@@ -733,6 +718,7 @@ choice
 config MACH_EUKREA_MBIMXSD51_BASEBOARD
 	prompt "Eukrea MBIMXSD development board"
 	bool
+	select IMX_HAVE_PLATFORM_IMX_SSI
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 	select LEDS_GPIO_REGISTER
 	help
@@ -836,12 +822,15 @@ config SOC_IMX6Q
 	bool "i.MX6 Quad support"
 	select ARM_CPU_SUSPEND if PM
 	select ARM_GIC
+	select COMMON_CLK
 	select CPU_V7
 	select HAVE_ARM_SCU
 	select HAVE_IMX_GPC
 	select HAVE_IMX_MMDC
 	select HAVE_IMX_SRC
 	select HAVE_SMP
+	select PINCTRL
+	select PINCTRL_IMX6Q
 	select USE_OF
 
 	help
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index ab939c5046c3..ff29421414f2 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -1,15 +1,18 @@
-obj-$(CONFIG_SOC_IMX1) += clock-imx1.o mm-imx1.o
-obj-$(CONFIG_SOC_IMX21) += clock-imx21.o mm-imx21.o
+obj-$(CONFIG_SOC_IMX1) += clk-imx1.o mm-imx1.o
+obj-$(CONFIG_SOC_IMX21) += clk-imx21.o mm-imx21.o
 
-obj-$(CONFIG_SOC_IMX25) += clock-imx25.o mm-imx25.o ehci-imx25.o cpu-imx25.o
+obj-$(CONFIG_SOC_IMX25) += clk-imx25.o mm-imx25.o ehci-imx25.o cpu-imx25.o
 
 obj-$(CONFIG_SOC_IMX27) += cpu-imx27.o pm-imx27.o
-obj-$(CONFIG_SOC_IMX27) += clock-imx27.o mm-imx27.o ehci-imx27.o
+obj-$(CONFIG_SOC_IMX27) += clk-imx27.o mm-imx27.o ehci-imx27.o
 
-obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clock-imx31.o iomux-imx31.o ehci-imx31.o pm-imx3.o
-obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clock-imx35.o ehci-imx35.o pm-imx3.o
+obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clk-imx31.o iomux-imx31.o ehci-imx31.o pm-imx3.o
+obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clk-imx35.o ehci-imx35.o pm-imx3.o
 
-obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clock-mx51-mx53.o ehci-imx5.o pm-imx5.o cpu_op-mx51.o
+obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o pm-imx5.o cpu_op-mx51.o
+
+obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \
+			    clk-pfd.o clk-busy.o
 
 # Support for CMOS sensor interface
 obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o
@@ -70,7 +73,7 @@ obj-$(CONFIG_CPU_V7) += head-v7.o
 AFLAGS_head-v7.o :=-Wa,-march=armv7-a
 obj-$(CONFIG_SMP) += platsmp.o
 obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
-obj-$(CONFIG_SOC_IMX6Q) += clock-imx6q.o mach-imx6q.o
+obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o
 
 ifeq ($(CONFIG_PM),y)
 obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o
@@ -83,10 +86,8 @@ obj-$(CONFIG_MACH_MX53_EVK) += mach-mx53_evk.o
 obj-$(CONFIG_MACH_MX53_SMD) += mach-mx53_smd.o
 obj-$(CONFIG_MACH_MX53_LOCO) += mach-mx53_loco.o
 obj-$(CONFIG_MACH_MX53_ARD) += mach-mx53_ard.o
-obj-$(CONFIG_MACH_EUKREA_CPUIMX51) += mach-cpuimx51.o
-obj-$(CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD) += eukrea_mbimx51-baseboard.o
 obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += mach-cpuimx51sd.o
-obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd-baseboard.o
+obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd51-baseboard.o
 obj-$(CONFIG_MX51_EFIKA_COMMON) += mx51_efika.o
 obj-$(CONFIG_MACH_MX51_EFIKAMX) += mach-mx51_efikamx.o
 obj-$(CONFIG_MACH_MX51_EFIKASB) += mach-mx51_efikasb.o
diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot
index 3851d8a27875..05541cf4a878 100644
--- a/arch/arm/mach-imx/Makefile.boot
+++ b/arch/arm/mach-imx/Makefile.boot
@@ -42,4 +42,5 @@ dtb-$(CONFIG_MACH_IMX51_DT) += imx51-babbage.dtb
 dtb-$(CONFIG_MACH_IMX53_DT) += imx53-ard.dtb imx53-evk.dtb \
 			       imx53-qsb.dtb imx53-smd.dtb
 dtb-$(CONFIG_SOC_IMX6Q)	+= imx6q-arm2.dtb \
-			   imx6q-sabrelite.dtb
+			   imx6q-sabrelite.dtb \
+			   imx6q-sabresd.dtb \
diff --git a/arch/arm/mach-imx/clk-busy.c b/arch/arm/mach-imx/clk-busy.c
new file mode 100644
index 000000000000..1a7a8dd045a1
--- /dev/null
+++ b/arch/arm/mach-imx/clk-busy.c
@@ -0,0 +1,189 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2012 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/err.h>
+#include "clk.h"
+
+static int clk_busy_wait(void __iomem *reg, u8 shift)
+{
+	unsigned long timeout = jiffies + msecs_to_jiffies(10);
+
+	while (readl_relaxed(reg) & (1 << shift))
+		if (time_after(jiffies, timeout))
+			return -ETIMEDOUT;
+
+	return 0;
+}
+
+struct clk_busy_divider {
+	struct clk_divider div;
+	const struct clk_ops *div_ops;
+	void __iomem *reg;
+	u8 shift;
+};
+
+static inline struct clk_busy_divider *to_clk_busy_divider(struct clk_hw *hw)
+{
+	struct clk_divider *div = container_of(hw, struct clk_divider, hw);
+
+	return container_of(div, struct clk_busy_divider, div);
+}
+
+static unsigned long clk_busy_divider_recalc_rate(struct clk_hw *hw,
+						  unsigned long parent_rate)
+{
+	struct clk_busy_divider *busy = to_clk_busy_divider(hw);
+
+	return busy->div_ops->recalc_rate(&busy->div.hw, parent_rate);
+}
+
+static long clk_busy_divider_round_rate(struct clk_hw *hw, unsigned long rate,
+					unsigned long *prate)
+{
+	struct clk_busy_divider *busy = to_clk_busy_divider(hw);
+
+	return busy->div_ops->round_rate(&busy->div.hw, rate, prate);
+}
+
+static int clk_busy_divider_set_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long parent_rate)
+{
+	struct clk_busy_divider *busy = to_clk_busy_divider(hw);
+	int ret;
+
+	ret = busy->div_ops->set_rate(&busy->div.hw, rate, parent_rate);
+	if (!ret)
+		ret = clk_busy_wait(busy->reg, busy->shift);
+
+	return ret;
+}
+
+static struct clk_ops clk_busy_divider_ops = {
+	.recalc_rate = clk_busy_divider_recalc_rate,
+	.round_rate = clk_busy_divider_round_rate,
+	.set_rate = clk_busy_divider_set_rate,
+};
+
+struct clk *imx_clk_busy_divider(const char *name, const char *parent_name,
+				 void __iomem *reg, u8 shift, u8 width,
+				 void __iomem *busy_reg, u8 busy_shift)
+{
+	struct clk_busy_divider *busy;
+	struct clk *clk;
+	struct clk_init_data init;
+
+	busy = kzalloc(sizeof(*busy), GFP_KERNEL);
+	if (!busy)
+		return ERR_PTR(-ENOMEM);
+
+	busy->reg = busy_reg;
+	busy->shift = busy_shift;
+
+	busy->div.reg = reg;
+	busy->div.shift = shift;
+	busy->div.width = width;
+	busy->div.lock = &imx_ccm_lock;
+	busy->div_ops = &clk_divider_ops;
+
+	init.name = name;
+	init.ops = &clk_busy_divider_ops;
+	init.flags = CLK_SET_RATE_PARENT;
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+
+	busy->div.hw.init = &init;
+
+	clk = clk_register(NULL, &busy->div.hw);
+	if (!clk)
+		kfree(busy);
+
+	return clk;
+}
+
+struct clk_busy_mux {
+	struct clk_mux mux;
+	const struct clk_ops *mux_ops;
+	void __iomem *reg;
+	u8 shift;
+};
+
+static inline struct clk_busy_mux *to_clk_busy_mux(struct clk_hw *hw)
+{
+	struct clk_mux *mux = container_of(hw, struct clk_mux, hw);
+
+	return container_of(mux, struct clk_busy_mux, mux);
+}
+
+static u8 clk_busy_mux_get_parent(struct clk_hw *hw)
+{
+	struct clk_busy_mux *busy = to_clk_busy_mux(hw);
+
+	return busy->mux_ops->get_parent(&busy->mux.hw);
+}
+
+static int clk_busy_mux_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct clk_busy_mux *busy = to_clk_busy_mux(hw);
+	int ret;
+
+	ret = busy->mux_ops->set_parent(&busy->mux.hw, index);
+	if (!ret)
+		ret = clk_busy_wait(busy->reg, busy->shift);
+
+	return ret;
+}
+
+struct clk_ops clk_busy_mux_ops = {
+	.get_parent = clk_busy_mux_get_parent,
+	.set_parent = clk_busy_mux_set_parent,
+};
+
+struct clk *imx_clk_busy_mux(const char *name, void __iomem *reg, u8 shift,
+			     u8 width, void __iomem *busy_reg, u8 busy_shift,
+			     const char **parent_names, int num_parents)
+{
+	struct clk_busy_mux *busy;
+	struct clk *clk;
+	struct clk_init_data init;
+
+	busy = kzalloc(sizeof(*busy), GFP_KERNEL);
+	if (!busy)
+		return ERR_PTR(-ENOMEM);
+
+	busy->reg = busy_reg;
+	busy->shift = busy_shift;
+
+	busy->mux.reg = reg;
+	busy->mux.shift = shift;
+	busy->mux.width = width;
+	busy->mux.lock = &imx_ccm_lock;
+	busy->mux_ops = &clk_mux_ops;
+
+	init.name = name;
+	init.ops = &clk_busy_mux_ops;
+	init.flags = 0;
+	init.parent_names = parent_names;
+	init.num_parents = num_parents;
+
+	busy->mux.hw.init = &init;
+
+	clk = clk_register(NULL, &busy->mux.hw);
+	if (IS_ERR(clk))
+		kfree(busy);
+
+	return clk;
+}
diff --git a/arch/arm/mach-imx/clk-gate2.c b/arch/arm/mach-imx/clk-gate2.c
new file mode 100644
index 000000000000..3c1b8ff9a0a6
--- /dev/null
+++ b/arch/arm/mach-imx/clk-gate2.c
@@ -0,0 +1,118 @@
+/*
+ * Copyright (C) 2010-2011 Canonical Ltd <jeremy.kerr@canonical.com>
+ * Copyright (C) 2011-2012 Mike Turquette, Linaro Ltd <mturquette@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Gated clock implementation
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/string.h>
+
+/**
+ * DOC: basic gatable clock which can gate and ungate it's ouput
+ *
+ * Traits of this clock:
+ * prepare - clk_(un)prepare only ensures parent is (un)prepared
+ * enable - clk_enable and clk_disable are functional & control gating
+ * rate - inherits rate from parent.  No clk_set_rate support
+ * parent - fixed parent.  No clk_set_parent support
+ */
+
+#define to_clk_gate(_hw) container_of(_hw, struct clk_gate, hw)
+
+static int clk_gate2_enable(struct clk_hw *hw)
+{
+	struct clk_gate *gate = to_clk_gate(hw);
+	u32 reg;
+	unsigned long flags = 0;
+
+	if (gate->lock)
+		spin_lock_irqsave(gate->lock, flags);
+
+	reg = readl(gate->reg);
+	reg |= 3 << gate->bit_idx;
+	writel(reg, gate->reg);
+
+	if (gate->lock)
+		spin_unlock_irqrestore(gate->lock, flags);
+
+	return 0;
+}
+
+static void clk_gate2_disable(struct clk_hw *hw)
+{
+	struct clk_gate *gate = to_clk_gate(hw);
+	u32 reg;
+	unsigned long flags = 0;
+
+	if (gate->lock)
+		spin_lock_irqsave(gate->lock, flags);
+
+	reg = readl(gate->reg);
+	reg &= ~(3 << gate->bit_idx);
+	writel(reg, gate->reg);
+
+	if (gate->lock)
+		spin_unlock_irqrestore(gate->lock, flags);
+}
+
+static int clk_gate2_is_enabled(struct clk_hw *hw)
+{
+	u32 reg;
+	struct clk_gate *gate = to_clk_gate(hw);
+
+	reg = readl(gate->reg);
+
+	if (((reg >> gate->bit_idx) & 3) == 3)
+		return 1;
+
+	return 0;
+}
+
+static struct clk_ops clk_gate2_ops = {
+	.enable = clk_gate2_enable,
+	.disable = clk_gate2_disable,
+	.is_enabled = clk_gate2_is_enabled,
+};
+
+struct clk *clk_register_gate2(struct device *dev, const char *name,
+		const char *parent_name, unsigned long flags,
+		void __iomem *reg, u8 bit_idx,
+		u8 clk_gate2_flags, spinlock_t *lock)
+{
+	struct clk_gate *gate;
+	struct clk *clk;
+	struct clk_init_data init;
+
+	gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL);
+	if (!gate)
+		return ERR_PTR(-ENOMEM);
+
+	/* struct clk_gate assignments */
+	gate->reg = reg;
+	gate->bit_idx = bit_idx;
+	gate->flags = clk_gate2_flags;
+	gate->lock = lock;
+
+	init.name = name;
+	init.ops = &clk_gate2_ops;
+	init.flags = flags;
+	init.parent_names = parent_name ? &parent_name : NULL;
+	init.num_parents = parent_name ? 1 : 0;
+
+	gate->hw.init = &init;
+
+	clk = clk_register(dev, &gate->hw);
+	if (IS_ERR(clk))
+		kfree(clk);
+
+	return clk;
+}
diff --git a/arch/arm/mach-imx/clk-imx1.c b/arch/arm/mach-imx/clk-imx1.c
new file mode 100644
index 000000000000..0f0beb580b73
--- /dev/null
+++ b/arch/arm/mach-imx/clk-imx1.c
@@ -0,0 +1,115 @@
+/*
+ *  Copyright (C) 2008 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include "clk.h"
+
+/* CCM register addresses */
+#define IO_ADDR_CCM(off)	(MX1_IO_ADDRESS(MX1_CCM_BASE_ADDR + (off)))
+
+#define CCM_CSCR	IO_ADDR_CCM(0x0)
+#define CCM_MPCTL0	IO_ADDR_CCM(0x4)
+#define CCM_SPCTL0	IO_ADDR_CCM(0xc)
+#define CCM_PCDR	IO_ADDR_CCM(0x20)
+
+/* SCM register addresses */
+#define IO_ADDR_SCM(off)	(MX1_IO_ADDRESS(MX1_SCM_BASE_ADDR + (off)))
+
+#define SCM_GCCR	IO_ADDR_SCM(0xc)
+
+static const char *prem_sel_clks[] = { "clk32_premult", "clk16m", };
+static const char *clko_sel_clks[] = { "per1", "hclk", "clk48m", "clk16m", "prem",
+				"fclk", };
+enum imx1_clks {
+	dummy, clk32, clk16m_ext, clk16m, clk32_premult, prem, mpll, spll, mcu,
+	fclk, hclk, clk48m, per1, per2, per3, clko, dma_gate, csi_gate,
+	mma_gate, usbd_gate, clk_max
+};
+
+static struct clk *clk[clk_max];
+
+int __init mx1_clocks_init(unsigned long fref)
+{
+	int i;
+
+	clk[dummy] = imx_clk_fixed("dummy", 0);
+	clk[clk32] = imx_clk_fixed("clk32", fref);
+	clk[clk16m_ext] = imx_clk_fixed("clk16m_ext", 16000000);
+	clk[clk16m] = imx_clk_gate("clk16m", "clk16m_ext", CCM_CSCR, 17);
+	clk[clk32_premult] = imx_clk_fixed_factor("clk32_premult", "clk32", 512, 1);
+	clk[prem] = imx_clk_mux("prem", CCM_CSCR, 16, 1, prem_sel_clks,
+			ARRAY_SIZE(prem_sel_clks));
+	clk[mpll] = imx_clk_pllv1("mpll", "clk32_premult", CCM_MPCTL0);
+	clk[spll] = imx_clk_pllv1("spll", "prem", CCM_SPCTL0);
+	clk[mcu] = imx_clk_divider("mcu", "clk32_premult", CCM_CSCR, 15, 1);
+	clk[fclk] = imx_clk_divider("fclk", "mpll", CCM_CSCR, 15, 1);
+	clk[hclk] = imx_clk_divider("hclk", "spll", CCM_CSCR, 10, 4);
+	clk[clk48m] = imx_clk_divider("clk48m", "spll", CCM_CSCR, 26, 3);
+	clk[per1] = imx_clk_divider("per1", "spll", CCM_PCDR, 0, 4);
+	clk[per2] = imx_clk_divider("per2", "spll", CCM_PCDR, 4, 4);
+	clk[per3] = imx_clk_divider("per3", "spll", CCM_PCDR, 16, 7);
+	clk[clko] = imx_clk_mux("clko", CCM_CSCR, 29, 3, clko_sel_clks,
+			ARRAY_SIZE(clko_sel_clks));
+	clk[dma_gate] = imx_clk_gate("dma_gate", "hclk", SCM_GCCR, 4);
+	clk[csi_gate] = imx_clk_gate("csi_gate", "hclk", SCM_GCCR, 2);
+	clk[mma_gate] = imx_clk_gate("mma_gate", "hclk", SCM_GCCR, 1);
+	clk[usbd_gate] = imx_clk_gate("usbd_gate", "clk48m", SCM_GCCR, 0);
+
+	for (i = 0; i < ARRAY_SIZE(clk); i++)
+		if (IS_ERR(clk[i]))
+			pr_err("imx1 clk %d: register failed with %ld\n",
+				i, PTR_ERR(clk[i]));
+
+	clk_register_clkdev(clk[dma_gate], "ahb", "imx-dma");
+	clk_register_clkdev(clk[csi_gate], NULL, "mx1-camera.0");
+	clk_register_clkdev(clk[mma_gate], "mma", NULL);
+	clk_register_clkdev(clk[usbd_gate], NULL, "imx_udc.0");
+	clk_register_clkdev(clk[per1], "per", "imx-gpt.0");
+	clk_register_clkdev(clk[hclk], "ipg", "imx-gpt.0");
+	clk_register_clkdev(clk[per1], "per", "imx1-uart.0");
+	clk_register_clkdev(clk[hclk], "ipg", "imx1-uart.0");
+	clk_register_clkdev(clk[per1], "per", "imx1-uart.1");
+	clk_register_clkdev(clk[hclk], "ipg", "imx1-uart.1");
+	clk_register_clkdev(clk[per1], "per", "imx1-uart.2");
+	clk_register_clkdev(clk[hclk], "ipg", "imx1-uart.2");
+	clk_register_clkdev(clk[hclk], NULL, "imx-i2c.0");
+	clk_register_clkdev(clk[per2], "per", "imx1-cspi.0");
+	clk_register_clkdev(clk[dummy], "ipg", "imx1-cspi.0");
+	clk_register_clkdev(clk[per2], "per", "imx1-cspi.1");
+	clk_register_clkdev(clk[dummy], "ipg", "imx1-cspi.1");
+	clk_register_clkdev(clk[per2], NULL, "imx-mmc.0");
+	clk_register_clkdev(clk[per2], "per", "imx-fb.0");
+	clk_register_clkdev(clk[dummy], "ipg", "imx-fb.0");
+	clk_register_clkdev(clk[dummy], "ahb", "imx-fb.0");
+	clk_register_clkdev(clk[hclk], "mshc", NULL);
+	clk_register_clkdev(clk[per3], "ssi", NULL);
+	clk_register_clkdev(clk[clk32], NULL, "mxc_rtc.0");
+	clk_register_clkdev(clk[clko], "clko", NULL);
+
+	mxc_timer_init(NULL, MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR),
+			MX1_TIM1_INT);
+
+	return 0;
+}
diff --git a/arch/arm/mach-imx/clk-imx21.c b/arch/arm/mach-imx/clk-imx21.c
new file mode 100644
index 000000000000..4e4f384ee8dd
--- /dev/null
+++ b/arch/arm/mach-imx/clk-imx21.c
@@ -0,0 +1,186 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ * Copyright 2008 Martin Fuzzey, mfuzzey@gmail.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include "clk.h"
+
+#define IO_ADDR_CCM(off)	(MX21_IO_ADDRESS(MX21_CCM_BASE_ADDR + (off)))
+
+/* Register offsets */
+#define CCM_CSCR		IO_ADDR_CCM(0x0)
+#define CCM_MPCTL0		IO_ADDR_CCM(0x4)
+#define CCM_MPCTL1		IO_ADDR_CCM(0x8)
+#define CCM_SPCTL0		IO_ADDR_CCM(0xc)
+#define CCM_SPCTL1		IO_ADDR_CCM(0x10)
+#define CCM_OSC26MCTL		IO_ADDR_CCM(0x14)
+#define CCM_PCDR0		IO_ADDR_CCM(0x18)
+#define CCM_PCDR1		IO_ADDR_CCM(0x1c)
+#define CCM_PCCR0		IO_ADDR_CCM(0x20)
+#define CCM_PCCR1		IO_ADDR_CCM(0x24)
+#define CCM_CCSR		IO_ADDR_CCM(0x28)
+#define CCM_PMCTL		IO_ADDR_CCM(0x2c)
+#define CCM_PMCOUNT		IO_ADDR_CCM(0x30)
+#define CCM_WKGDCTL		IO_ADDR_CCM(0x34)
+
+static const char *mpll_sel_clks[] = { "fpm", "ckih", };
+static const char *spll_sel_clks[] = { "fpm", "ckih", };
+
+enum imx21_clks {
+	ckil, ckih, fpm, mpll_sel, spll_sel, mpll, spll, fclk, hclk, ipg, per1,
+	per2, per3, per4, uart1_ipg_gate, uart2_ipg_gate, uart3_ipg_gate,
+	uart4_ipg_gate, gpt1_ipg_gate, gpt2_ipg_gate, gpt3_ipg_gate,
+	pwm_ipg_gate, sdhc1_ipg_gate, sdhc2_ipg_gate, lcdc_ipg_gate,
+	lcdc_hclk_gate, cspi3_ipg_gate, cspi2_ipg_gate, cspi1_ipg_gate,
+	per4_gate, csi_hclk_gate, usb_div, usb_gate, usb_hclk_gate, ssi1_gate,
+	ssi2_gate, nfc_div, nfc_gate, dma_gate, dma_hclk_gate, brom_gate,
+	emma_gate, emma_hclk_gate, slcdc_gate, slcdc_hclk_gate, wdog_gate,
+	gpio_gate, i2c_gate, kpp_gate, owire_gate, rtc_gate, clk_max
+};
+
+static struct clk *clk[clk_max];
+
+/*
+ * must be called very early to get information about the
+ * available clock rate when the timer framework starts
+ */
+int __init mx21_clocks_init(unsigned long lref, unsigned long href)
+{
+	int i;
+
+	clk[ckil] = imx_clk_fixed("ckil", lref);
+	clk[ckih] = imx_clk_fixed("ckih", href);
+	clk[fpm] = imx_clk_fixed_factor("fpm", "ckil", 512, 1);
+	clk[mpll_sel] = imx_clk_mux("mpll_sel", CCM_CSCR, 16, 1, mpll_sel_clks,
+			ARRAY_SIZE(mpll_sel_clks));
+	clk[spll_sel] = imx_clk_mux("spll_sel", CCM_CSCR, 17, 1, spll_sel_clks,
+			ARRAY_SIZE(spll_sel_clks));
+	clk[mpll] = imx_clk_pllv1("mpll", "mpll_sel", CCM_MPCTL0);
+	clk[spll] = imx_clk_pllv1("spll", "spll_sel", CCM_SPCTL0);
+	clk[fclk] = imx_clk_divider("fclk", "mpll", CCM_CSCR, 29, 3);
+	clk[hclk] = imx_clk_divider("hclk", "fclk", CCM_CSCR, 10, 4);
+	clk[ipg] = imx_clk_divider("ipg", "hclk", CCM_CSCR, 9, 1);
+	clk[per1] = imx_clk_divider("per1", "mpll", CCM_PCDR1, 0, 6);
+	clk[per2] = imx_clk_divider("per2", "mpll", CCM_PCDR1, 8, 6);
+	clk[per3] = imx_clk_divider("per3", "mpll", CCM_PCDR1, 16, 6);
+	clk[per4] = imx_clk_divider("per4", "mpll", CCM_PCDR1, 24, 6);
+	clk[uart1_ipg_gate] = imx_clk_gate("uart1_ipg_gate", "ipg", CCM_PCCR0, 0);
+	clk[uart2_ipg_gate] = imx_clk_gate("uart2_ipg_gate", "ipg", CCM_PCCR0, 1);
+	clk[uart3_ipg_gate] = imx_clk_gate("uart3_ipg_gate", "ipg", CCM_PCCR0, 2);
+	clk[uart4_ipg_gate] = imx_clk_gate("uart4_ipg_gate", "ipg", CCM_PCCR0, 3);
+	clk[gpt1_ipg_gate] = imx_clk_gate("gpt1_ipg_gate", "ipg", CCM_PCCR1, 25);
+	clk[gpt2_ipg_gate] = imx_clk_gate("gpt2_ipg_gate", "ipg", CCM_PCCR1, 26);
+	clk[gpt3_ipg_gate] = imx_clk_gate("gpt3_ipg_gate", "ipg", CCM_PCCR1, 27);
+	clk[pwm_ipg_gate] = imx_clk_gate("pwm_ipg_gate", "ipg", CCM_PCCR1, 28);
+	clk[sdhc1_ipg_gate] = imx_clk_gate("sdhc1_ipg_gate", "ipg", CCM_PCCR0, 9);
+	clk[sdhc2_ipg_gate] = imx_clk_gate("sdhc2_ipg_gate", "ipg", CCM_PCCR0, 10);
+	clk[lcdc_ipg_gate] = imx_clk_gate("lcdc_ipg_gate", "ipg", CCM_PCCR0, 18);
+	clk[lcdc_hclk_gate] = imx_clk_gate("lcdc_hclk_gate", "hclk", CCM_PCCR0, 26);
+	clk[cspi3_ipg_gate] = imx_clk_gate("cspi3_ipg_gate", "ipg", CCM_PCCR1, 23);
+	clk[cspi2_ipg_gate] = imx_clk_gate("cspi2_ipg_gate", "ipg", CCM_PCCR0, 5);
+	clk[cspi1_ipg_gate] = imx_clk_gate("cspi1_ipg_gate", "ipg", CCM_PCCR0, 4);
+	clk[per4_gate] = imx_clk_gate("per4_gate", "per4", CCM_PCCR0, 22);
+	clk[csi_hclk_gate] = imx_clk_gate("csi_hclk_gate", "hclk", CCM_PCCR0, 31);
+	clk[usb_div] = imx_clk_divider("usb_div", "spll", CCM_CSCR, 26, 3);
+	clk[usb_gate] = imx_clk_gate("usb_gate", "usb_div", CCM_PCCR0, 14);
+	clk[usb_hclk_gate] = imx_clk_gate("usb_hclk_gate", "hclk", CCM_PCCR0, 24);
+	clk[ssi1_gate] = imx_clk_gate("ssi1_gate", "ipg", CCM_PCCR0, 6);
+	clk[ssi2_gate] = imx_clk_gate("ssi2_gate", "ipg", CCM_PCCR0, 7);
+	clk[nfc_div] = imx_clk_divider("nfc_div", "ipg", CCM_PCDR0, 12, 4);
+	clk[nfc_gate] = imx_clk_gate("nfc_gate", "nfc_div", CCM_PCCR0, 19);
+	clk[dma_gate] = imx_clk_gate("dma_gate", "ipg", CCM_PCCR0, 13);
+	clk[dma_hclk_gate] = imx_clk_gate("dma_hclk_gate", "hclk", CCM_PCCR0, 30);
+	clk[brom_gate] = imx_clk_gate("brom_gate", "hclk", CCM_PCCR0, 28);
+	clk[emma_gate] = imx_clk_gate("emma_gate", "ipg", CCM_PCCR0, 15);
+	clk[emma_hclk_gate] = imx_clk_gate("emma_hclk_gate", "hclk", CCM_PCCR0, 27);
+	clk[slcdc_gate] = imx_clk_gate("slcdc_gate", "ipg", CCM_PCCR0, 25);
+	clk[slcdc_hclk_gate] = imx_clk_gate("slcdc_hclk_gate", "hclk", CCM_PCCR0, 21);
+	clk[wdog_gate] = imx_clk_gate("wdog_gate", "ipg", CCM_PCCR1, 24);
+	clk[gpio_gate] = imx_clk_gate("gpio_gate", "ipg", CCM_PCCR0, 11);
+	clk[i2c_gate] = imx_clk_gate("i2c_gate", "ipg", CCM_PCCR0, 12);
+	clk[kpp_gate] = imx_clk_gate("kpp_gate", "ipg", CCM_PCCR1, 30);
+	clk[owire_gate] = imx_clk_gate("owire_gate", "ipg", CCM_PCCR1, 31);
+	clk[rtc_gate] = imx_clk_gate("rtc_gate", "ipg", CCM_PCCR1, 29);
+
+	for (i = 0; i < ARRAY_SIZE(clk); i++)
+		if (IS_ERR(clk[i]))
+			pr_err("i.MX21 clk %d: register failed with %ld\n",
+				i, PTR_ERR(clk[i]));
+
+	clk_register_clkdev(clk[per1], "per1", NULL);
+	clk_register_clkdev(clk[per2], "per2", NULL);
+	clk_register_clkdev(clk[per3], "per3", NULL);
+	clk_register_clkdev(clk[per4], "per4", NULL);
+	clk_register_clkdev(clk[per1], "per", "imx21-uart.0");
+	clk_register_clkdev(clk[uart1_ipg_gate], "ipg", "imx21-uart.0");
+	clk_register_clkdev(clk[per1], "per", "imx21-uart.1");
+	clk_register_clkdev(clk[uart2_ipg_gate], "ipg", "imx21-uart.1");
+	clk_register_clkdev(clk[per1], "per", "imx21-uart.2");
+	clk_register_clkdev(clk[uart3_ipg_gate], "ipg", "imx21-uart.2");
+	clk_register_clkdev(clk[per1], "per", "imx21-uart.3");
+	clk_register_clkdev(clk[uart4_ipg_gate], "ipg", "imx21-uart.3");
+	clk_register_clkdev(clk[gpt1_ipg_gate], "ipg", "imx-gpt.0");
+	clk_register_clkdev(clk[per1], "per", "imx-gpt.0");
+	clk_register_clkdev(clk[gpt2_ipg_gate], "ipg", "imx-gpt.1");
+	clk_register_clkdev(clk[per1], "per", "imx-gpt.1");
+	clk_register_clkdev(clk[gpt3_ipg_gate], "ipg", "imx-gpt.2");
+	clk_register_clkdev(clk[per1], "per", "imx-gpt.2");
+	clk_register_clkdev(clk[pwm_ipg_gate], "pwm", "mxc_pwm.0");
+	clk_register_clkdev(clk[per2], "per", "imx21-cspi.0");
+	clk_register_clkdev(clk[cspi1_ipg_gate], "ipg", "imx21-cspi.0");
+	clk_register_clkdev(clk[per2], "per", "imx21-cspi.1");
+	clk_register_clkdev(clk[cspi2_ipg_gate], "ipg", "imx21-cspi.1");
+	clk_register_clkdev(clk[per2], "per", "imx21-cspi.2");
+	clk_register_clkdev(clk[cspi3_ipg_gate], "ipg", "imx21-cspi.2");
+	clk_register_clkdev(clk[per3], "per", "imx-fb.0");
+	clk_register_clkdev(clk[lcdc_ipg_gate], "ipg", "imx-fb.0");
+	clk_register_clkdev(clk[lcdc_hclk_gate], "ahb", "imx-fb.0");
+	clk_register_clkdev(clk[usb_gate], "per", "imx21-hcd.0");
+	clk_register_clkdev(clk[usb_hclk_gate], "ahb", "imx21-hcd.0");
+	clk_register_clkdev(clk[nfc_gate], NULL, "mxc_nand.0");
+	clk_register_clkdev(clk[dma_hclk_gate], "ahb", "imx-dma");
+	clk_register_clkdev(clk[dma_gate], "ipg", "imx-dma");
+	clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
+	clk_register_clkdev(clk[i2c_gate], NULL, "imx-i2c.0");
+	clk_register_clkdev(clk[kpp_gate], NULL, "mxc-keypad");
+	clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1.0");
+	clk_register_clkdev(clk[brom_gate], "brom", NULL);
+	clk_register_clkdev(clk[emma_gate], "emma", NULL);
+	clk_register_clkdev(clk[slcdc_gate], "slcdc", NULL);
+	clk_register_clkdev(clk[gpio_gate], "gpio", NULL);
+	clk_register_clkdev(clk[rtc_gate], "rtc", NULL);
+	clk_register_clkdev(clk[csi_hclk_gate], "csi", NULL);
+	clk_register_clkdev(clk[ssi1_gate], "ssi1", NULL);
+	clk_register_clkdev(clk[ssi2_gate], "ssi2", NULL);
+	clk_register_clkdev(clk[sdhc1_ipg_gate], "sdhc1", NULL);
+	clk_register_clkdev(clk[sdhc2_ipg_gate], "sdhc2", NULL);
+
+	mxc_timer_init(NULL, MX21_IO_ADDRESS(MX21_GPT1_BASE_ADDR),
+			MX21_INT_GPT1);
+	return 0;
+}
diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c
new file mode 100644
index 000000000000..d9833bb5fd61
--- /dev/null
+++ b/arch/arm/mach-imx/clk-imx25.c
@@ -0,0 +1,248 @@
+/*
+ * Copyright (C) 2009 by Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/mx25.h>
+#include "clk.h"
+
+#define CRM_BASE	MX25_IO_ADDRESS(MX25_CRM_BASE_ADDR)
+
+#define CCM_MPCTL	0x00
+#define CCM_UPCTL	0x04
+#define CCM_CCTL	0x08
+#define CCM_CGCR0	0x0C
+#define CCM_CGCR1	0x10
+#define CCM_CGCR2	0x14
+#define CCM_PCDR0	0x18
+#define CCM_PCDR1	0x1C
+#define CCM_PCDR2	0x20
+#define CCM_PCDR3	0x24
+#define CCM_RCSR	0x28
+#define CCM_CRDR	0x2C
+#define CCM_DCVR0	0x30
+#define CCM_DCVR1	0x34
+#define CCM_DCVR2	0x38
+#define CCM_DCVR3	0x3c
+#define CCM_LTR0	0x40
+#define CCM_LTR1	0x44
+#define CCM_LTR2	0x48
+#define CCM_LTR3	0x4c
+#define CCM_MCR		0x64
+
+#define ccm(x)	(CRM_BASE + (x))
+
+static const char *cpu_sel_clks[] = { "mpll", "mpll_cpu_3_4", };
+static const char *per_sel_clks[] = { "ahb", "upll", };
+
+enum mx25_clks {
+	dummy, osc, mpll, upll, mpll_cpu_3_4, cpu_sel, cpu, ahb, usb_div, ipg,
+	per0_sel, per1_sel, per2_sel, per3_sel, per4_sel, per5_sel, per6_sel,
+	per7_sel, per8_sel, per9_sel, per10_sel, per11_sel, per12_sel,
+	per13_sel, per14_sel, per15_sel, per0, per1, per2, per3, per4, per5,
+	per6, per7, per8, per9, per10, per11, per12, per13, per14, per15,
+	csi_ipg_per, esdhc1_ipg_per, esdhc2_ipg_per, gpt_ipg_per, i2c_ipg_per,
+	lcdc_ipg_per, nfc_ipg_per, ssi1_ipg_per, ssi2_ipg_per, uart_ipg_per,
+	csi_ahb, esdhc1_ahb, esdhc2_ahb, fec_ahb, lcdc_ahb, sdma_ahb,
+	usbotg_ahb, can1_ipg, can2_ipg, csi_ipg, cspi1_ipg, cspi2_ipg,
+	cspi3_ipg, dryice_ipg, esdhc1_ipg, esdhc2_ipg, fec_ipg, iim_ipg,
+	kpp_ipg, lcdc_ipg, pwm1_ipg, pwm2_ipg, pwm3_ipg, pwm4_ipg, sdma_ipg,
+	ssi1_ipg, ssi2_ipg, tsc_ipg, uart1_ipg, uart2_ipg, uart3_ipg,
+	uart4_ipg, uart5_ipg, wdt_ipg, clk_max
+};
+
+static struct clk *clk[clk_max];
+
+int __init mx25_clocks_init(void)
+{
+	int i;
+
+	clk[dummy] = imx_clk_fixed("dummy", 0);
+	clk[osc] = imx_clk_fixed("osc", 24000000);
+	clk[mpll] = imx_clk_pllv1("mpll", "osc", ccm(CCM_MPCTL));
+	clk[upll] = imx_clk_pllv1("upll", "osc", ccm(CCM_UPCTL));
+	clk[mpll_cpu_3_4] = imx_clk_fixed_factor("mpll_cpu_3_4", "mpll", 3, 4);
+	clk[cpu_sel] = imx_clk_mux("cpu_sel", ccm(CCM_CCTL), 14, 1, cpu_sel_clks, ARRAY_SIZE(cpu_sel_clks));
+	clk[cpu] = imx_clk_divider("cpu", "cpu_sel", ccm(CCM_CCTL), 30, 2);
+	clk[ahb] = imx_clk_divider("ahb", "cpu", ccm(CCM_CCTL), 28, 2);
+	clk[usb_div] = imx_clk_divider("usb_div", "upll", ccm(CCM_CCTL), 16, 6); 
+	clk[ipg] = imx_clk_fixed_factor("ipg", "ahb", 1, 2);
+	clk[per0_sel] = imx_clk_mux("per0_sel", ccm(CCM_MCR), 0, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+	clk[per1_sel] = imx_clk_mux("per1_sel", ccm(CCM_MCR), 1, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+	clk[per2_sel] = imx_clk_mux("per2_sel", ccm(CCM_MCR), 2, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+	clk[per3_sel] = imx_clk_mux("per3_sel", ccm(CCM_MCR), 3, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+	clk[per4_sel] = imx_clk_mux("per4_sel", ccm(CCM_MCR), 4, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+	clk[per5_sel] = imx_clk_mux("per5_sel", ccm(CCM_MCR), 5, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+	clk[per6_sel] = imx_clk_mux("per6_sel", ccm(CCM_MCR), 6, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+	clk[per7_sel] = imx_clk_mux("per7_sel", ccm(CCM_MCR), 7, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+	clk[per8_sel] = imx_clk_mux("per8_sel", ccm(CCM_MCR), 8, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+	clk[per9_sel] = imx_clk_mux("per9_sel", ccm(CCM_MCR), 9, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+	clk[per10_sel] = imx_clk_mux("per10_sel", ccm(CCM_MCR), 10, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+	clk[per11_sel] = imx_clk_mux("per11_sel", ccm(CCM_MCR), 11, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+	clk[per12_sel] = imx_clk_mux("per12_sel", ccm(CCM_MCR), 12, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+	clk[per13_sel] = imx_clk_mux("per13_sel", ccm(CCM_MCR), 13, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+	clk[per14_sel] = imx_clk_mux("per14_sel", ccm(CCM_MCR), 14, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+	clk[per15_sel] = imx_clk_mux("per15_sel", ccm(CCM_MCR), 15, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+	clk[per0] = imx_clk_divider("per0", "per0_sel", ccm(CCM_PCDR0), 0, 6);
+	clk[per1] = imx_clk_divider("per1", "per1_sel", ccm(CCM_PCDR0), 8, 6);
+	clk[per2] = imx_clk_divider("per2", "per2_sel", ccm(CCM_PCDR0), 16, 6);
+	clk[per3] = imx_clk_divider("per3", "per3_sel", ccm(CCM_PCDR0), 24, 6);
+	clk[per4] = imx_clk_divider("per4", "per4_sel", ccm(CCM_PCDR1), 0, 6);
+	clk[per5] = imx_clk_divider("per5", "per5_sel", ccm(CCM_PCDR1), 8, 6);
+	clk[per6] = imx_clk_divider("per6", "per6_sel", ccm(CCM_PCDR1), 16, 6);
+	clk[per7] = imx_clk_divider("per7", "per7_sel", ccm(CCM_PCDR1), 24, 6);
+	clk[per8] = imx_clk_divider("per8", "per8_sel", ccm(CCM_PCDR2), 0, 6);
+	clk[per9] = imx_clk_divider("per9", "per9_sel", ccm(CCM_PCDR2), 8, 6);
+	clk[per10] = imx_clk_divider("per10", "per10_sel", ccm(CCM_PCDR2), 16, 6);
+	clk[per11] = imx_clk_divider("per11", "per11_sel", ccm(CCM_PCDR2), 24, 6);
+	clk[per12] = imx_clk_divider("per12", "per12_sel", ccm(CCM_PCDR3), 0, 6);
+	clk[per13] = imx_clk_divider("per13", "per13_sel", ccm(CCM_PCDR3), 8, 6);
+	clk[per14] = imx_clk_divider("per14", "per14_sel", ccm(CCM_PCDR3), 16, 6);
+	clk[per15] = imx_clk_divider("per15", "per15_sel", ccm(CCM_PCDR3), 24, 6);
+	clk[csi_ipg_per] = imx_clk_gate("csi_ipg_per", "per0", ccm(CCM_CGCR0), 0);
+	clk[esdhc1_ipg_per] = imx_clk_gate("esdhc1_ipg_per", "per3", ccm(CCM_CGCR0),  3);
+	clk[esdhc2_ipg_per] = imx_clk_gate("esdhc2_ipg_per", "per4", ccm(CCM_CGCR0),  4);
+	clk[gpt_ipg_per] = imx_clk_gate("gpt_ipg_per", "per5", ccm(CCM_CGCR0),  5);
+	clk[i2c_ipg_per] = imx_clk_gate("i2c_ipg_per", "per6", ccm(CCM_CGCR0),  6);
+	clk[lcdc_ipg_per] = imx_clk_gate("lcdc_ipg_per", "per8", ccm(CCM_CGCR0),  7);
+	clk[nfc_ipg_per] = imx_clk_gate("nfc_ipg_per", "ipg_per", ccm(CCM_CGCR0),  8);
+	clk[ssi1_ipg_per] = imx_clk_gate("ssi1_ipg_per", "per13", ccm(CCM_CGCR0), 13);
+	clk[ssi2_ipg_per] = imx_clk_gate("ssi2_ipg_per", "per14", ccm(CCM_CGCR0), 14);
+	clk[uart_ipg_per] = imx_clk_gate("uart_ipg_per", "per15", ccm(CCM_CGCR0), 15);
+	clk[csi_ahb] = imx_clk_gate("csi_ahb", "ahb", ccm(CCM_CGCR0), 18);
+	clk[esdhc1_ahb] = imx_clk_gate("esdhc1_ahb", "ahb", ccm(CCM_CGCR0), 21);
+	clk[esdhc2_ahb] = imx_clk_gate("esdhc2_ahb", "ahb", ccm(CCM_CGCR0), 22);
+	clk[fec_ahb] = imx_clk_gate("fec_ahb", "ahb", ccm(CCM_CGCR0), 23);
+	clk[lcdc_ahb] = imx_clk_gate("lcdc_ahb", "ahb", ccm(CCM_CGCR0), 24);
+	clk[sdma_ahb] = imx_clk_gate("sdma_ahb", "ahb", ccm(CCM_CGCR0), 26);
+	clk[usbotg_ahb] = imx_clk_gate("usbotg_ahb", "ahb", ccm(CCM_CGCR0), 28);
+	clk[can1_ipg] = imx_clk_gate("can1_ipg", "ipg", ccm(CCM_CGCR1),  2);
+	clk[can2_ipg] = imx_clk_gate("can2_ipg", "ipg", ccm(CCM_CGCR1),  3);
+	clk[csi_ipg] = imx_clk_gate("csi_ipg", "ipg", ccm(CCM_CGCR1),  4);
+	clk[cspi1_ipg] = imx_clk_gate("cspi1_ipg", "ipg", ccm(CCM_CGCR1),  5);
+	clk[cspi2_ipg] = imx_clk_gate("cspi2_ipg", "ipg", ccm(CCM_CGCR1),  6);
+	clk[cspi3_ipg] = imx_clk_gate("cspi3_ipg", "ipg", ccm(CCM_CGCR1),  7);
+	clk[dryice_ipg] = imx_clk_gate("dryice_ipg", "ipg", ccm(CCM_CGCR1),  8);
+	clk[esdhc1_ipg] = imx_clk_gate("esdhc1_ipg", "ipg", ccm(CCM_CGCR1), 13);
+	clk[esdhc2_ipg] = imx_clk_gate("esdhc2_ipg", "ipg", ccm(CCM_CGCR1), 14);
+	clk[fec_ipg] = imx_clk_gate("fec_ipg", "ipg", ccm(CCM_CGCR1), 15);
+	clk[iim_ipg] = imx_clk_gate("iim_ipg", "ipg", ccm(CCM_CGCR1), 26);
+	clk[kpp_ipg] = imx_clk_gate("kpp_ipg", "ipg", ccm(CCM_CGCR1), 28);
+	clk[lcdc_ipg] = imx_clk_gate("lcdc_ipg", "ipg", ccm(CCM_CGCR1), 29);
+	clk[pwm1_ipg] = imx_clk_gate("pwm1_ipg", "ipg", ccm(CCM_CGCR1), 31);
+	clk[pwm2_ipg] = imx_clk_gate("pwm2_ipg", "ipg", ccm(CCM_CGCR2),  0);
+	clk[pwm3_ipg] = imx_clk_gate("pwm3_ipg", "ipg", ccm(CCM_CGCR2),  1);
+	clk[pwm4_ipg] = imx_clk_gate("pwm4_ipg", "ipg", ccm(CCM_CGCR2),  2);
+	clk[sdma_ipg] = imx_clk_gate("sdma_ipg", "ipg", ccm(CCM_CGCR2),  6);
+	clk[ssi1_ipg] = imx_clk_gate("ssi1_ipg", "ipg", ccm(CCM_CGCR2), 11);
+	clk[ssi2_ipg] = imx_clk_gate("ssi2_ipg", "ipg", ccm(CCM_CGCR2), 12);
+	clk[tsc_ipg] = imx_clk_gate("tsc_ipg", "ipg", ccm(CCM_CGCR2), 13);
+	clk[uart1_ipg] = imx_clk_gate("uart1_ipg", "ipg", ccm(CCM_CGCR2), 14);
+	clk[uart2_ipg] = imx_clk_gate("uart2_ipg", "ipg", ccm(CCM_CGCR2), 15);
+	clk[uart3_ipg] = imx_clk_gate("uart3_ipg", "ipg", ccm(CCM_CGCR2), 16);
+	clk[uart4_ipg] = imx_clk_gate("uart4_ipg", "ipg", ccm(CCM_CGCR2), 17);
+	clk[uart5_ipg] = imx_clk_gate("uart5_ipg", "ipg", ccm(CCM_CGCR2), 18);
+	clk[wdt_ipg] = imx_clk_gate("wdt_ipg", "ipg", ccm(CCM_CGCR2), 19);
+
+	for (i = 0; i < ARRAY_SIZE(clk); i++)
+		if (IS_ERR(clk[i]))
+			pr_err("i.MX25 clk %d: register failed with %ld\n",
+				i, PTR_ERR(clk[i]));
+
+	/* i.mx25 has the i.mx21 type uart */
+	clk_register_clkdev(clk[uart1_ipg], "ipg", "imx21-uart.0");
+	clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.0");
+	clk_register_clkdev(clk[uart2_ipg], "ipg", "imx21-uart.1");
+	clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.1");
+	clk_register_clkdev(clk[uart3_ipg], "ipg", "imx21-uart.2");
+	clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.2");
+	clk_register_clkdev(clk[uart4_ipg], "ipg", "imx21-uart.3");
+	clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.3");
+	clk_register_clkdev(clk[uart5_ipg], "ipg", "imx21-uart.4");
+	clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.4");
+	clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0");
+	clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0");
+	clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.0");
+	clk_register_clkdev(clk[usbotg_ahb], "ahb", "mxc-ehci.0");
+	clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.0");
+	clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.1");
+	clk_register_clkdev(clk[usbotg_ahb], "ahb", "mxc-ehci.1");
+	clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.1");
+	clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
+	clk_register_clkdev(clk[usbotg_ahb], "ahb", "mxc-ehci.2");
+	clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2");
+	clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc");
+	clk_register_clkdev(clk[usbotg_ahb], "ahb", "fsl-usb2-udc");
+	clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc");
+	clk_register_clkdev(clk[nfc_ipg_per], NULL, "mxc_nand.0");
+	/* i.mx25 has the i.mx35 type cspi */
+	clk_register_clkdev(clk[cspi1_ipg], NULL, "imx35-cspi.0");
+	clk_register_clkdev(clk[cspi2_ipg], NULL, "imx35-cspi.1");
+	clk_register_clkdev(clk[cspi3_ipg], NULL, "imx35-cspi.2");
+	clk_register_clkdev(clk[pwm1_ipg], "ipg", "mxc_pwm.0");
+	clk_register_clkdev(clk[per10], "per", "mxc_pwm.0");
+	clk_register_clkdev(clk[pwm1_ipg], "ipg", "mxc_pwm.1");
+	clk_register_clkdev(clk[per10], "per", "mxc_pwm.1");
+	clk_register_clkdev(clk[pwm1_ipg], "ipg", "mxc_pwm.2");
+	clk_register_clkdev(clk[per10], "per", "mxc_pwm.2");
+	clk_register_clkdev(clk[pwm1_ipg], "ipg", "mxc_pwm.3");
+	clk_register_clkdev(clk[per10], "per", "mxc_pwm.3");
+	clk_register_clkdev(clk[kpp_ipg], NULL, "imx-keypad");
+	clk_register_clkdev(clk[tsc_ipg], NULL, "mx25-adc");
+	clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx-i2c.0");
+	clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx-i2c.1");
+	clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx-i2c.2");
+	clk_register_clkdev(clk[fec_ipg], "ipg", "imx25-fec.0");
+	clk_register_clkdev(clk[fec_ahb], "ahb", "imx25-fec.0");
+	clk_register_clkdev(clk[dryice_ipg], NULL, "imxdi_rtc.0");
+	clk_register_clkdev(clk[lcdc_ipg_per], "per", "imx-fb.0");
+	clk_register_clkdev(clk[lcdc_ipg], "ipg", "imx-fb.0");
+	clk_register_clkdev(clk[lcdc_ahb], "ahb", "imx-fb.0");
+	clk_register_clkdev(clk[wdt_ipg], NULL, "imx2-wdt.0");
+	clk_register_clkdev(clk[ssi1_ipg_per], "per", "imx-ssi.0");
+	clk_register_clkdev(clk[ssi1_ipg], "ipg", "imx-ssi.0");
+	clk_register_clkdev(clk[ssi2_ipg_per], "per", "imx-ssi.1");
+	clk_register_clkdev(clk[ssi2_ipg], "ipg", "imx-ssi.1");
+	clk_register_clkdev(clk[esdhc1_ipg_per], "per", "sdhci-esdhc-imx25.0");
+	clk_register_clkdev(clk[esdhc1_ipg], "ipg", "sdhci-esdhc-imx25.0");
+	clk_register_clkdev(clk[esdhc1_ahb], "ahb", "sdhci-esdhc-imx25.0");
+	clk_register_clkdev(clk[esdhc2_ipg_per], "per", "sdhci-esdhc-imx25.1");
+	clk_register_clkdev(clk[esdhc2_ipg], "ipg", "sdhci-esdhc-imx25.1");
+	clk_register_clkdev(clk[esdhc2_ahb], "ahb", "sdhci-esdhc-imx25.1");
+	clk_register_clkdev(clk[csi_ipg_per], "per", "mx2-camera.0");
+	clk_register_clkdev(clk[csi_ipg], "ipg", "mx2-camera.0");
+	clk_register_clkdev(clk[csi_ahb], "ahb", "mx2-camera.0");
+	clk_register_clkdev(clk[dummy], "audmux", NULL);
+	clk_register_clkdev(clk[can1_ipg], NULL, "flexcan.0");
+	clk_register_clkdev(clk[can2_ipg], NULL, "flexcan.1");
+	/* i.mx25 has the i.mx35 type sdma */
+	clk_register_clkdev(clk[sdma_ipg], "ipg", "imx35-sdma");
+	clk_register_clkdev(clk[sdma_ahb], "ahb", "imx35-sdma");
+	clk_register_clkdev(clk[iim_ipg], "iim", NULL);
+
+	mxc_timer_init(NULL, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
+	return 0;
+}
diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c
new file mode 100644
index 000000000000..50a7ebd8d1b2
--- /dev/null
+++ b/arch/arm/mach-imx/clk-imx27.c
@@ -0,0 +1,290 @@
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include "clk.h"
+
+#define IO_ADDR_CCM(off)	(MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR + (off)))
+
+/* Register offsets */
+#define CCM_CSCR		IO_ADDR_CCM(0x0)
+#define CCM_MPCTL0		IO_ADDR_CCM(0x4)
+#define CCM_MPCTL1		IO_ADDR_CCM(0x8)
+#define CCM_SPCTL0		IO_ADDR_CCM(0xc)
+#define CCM_SPCTL1		IO_ADDR_CCM(0x10)
+#define CCM_OSC26MCTL		IO_ADDR_CCM(0x14)
+#define CCM_PCDR0		IO_ADDR_CCM(0x18)
+#define CCM_PCDR1		IO_ADDR_CCM(0x1c)
+#define CCM_PCCR0		IO_ADDR_CCM(0x20)
+#define CCM_PCCR1		IO_ADDR_CCM(0x24)
+#define CCM_CCSR		IO_ADDR_CCM(0x28)
+#define CCM_PMCTL		IO_ADDR_CCM(0x2c)
+#define CCM_PMCOUNT		IO_ADDR_CCM(0x30)
+#define CCM_WKGDCTL		IO_ADDR_CCM(0x34)
+
+#define CCM_CSCR_UPDATE_DIS	(1 << 31)
+#define CCM_CSCR_SSI2		(1 << 23)
+#define CCM_CSCR_SSI1		(1 << 22)
+#define CCM_CSCR_VPU		(1 << 21)
+#define CCM_CSCR_MSHC           (1 << 20)
+#define CCM_CSCR_SPLLRES        (1 << 19)
+#define CCM_CSCR_MPLLRES        (1 << 18)
+#define CCM_CSCR_SP             (1 << 17)
+#define CCM_CSCR_MCU            (1 << 16)
+#define CCM_CSCR_OSC26MDIV      (1 << 4)
+#define CCM_CSCR_OSC26M         (1 << 3)
+#define CCM_CSCR_FPM            (1 << 2)
+#define CCM_CSCR_SPEN           (1 << 1)
+#define CCM_CSCR_MPEN           (1 << 0)
+
+/* i.MX27 TO 2+ */
+#define CCM_CSCR_ARM_SRC        (1 << 15)
+
+#define CCM_SPCTL1_LF           (1 << 15)
+#define CCM_SPCTL1_BRMO         (1 << 6)
+
+static const char *vpu_sel_clks[] = { "spll", "mpll_main2", };
+static const char *cpu_sel_clks[] = { "mpll_main2", "mpll", };
+static const char *clko_sel_clks[] = {
+	"ckil", "prem", "ckih", "ckih",
+	"ckih", "mpll", "spll", "cpu_div",
+	"ahb", "ipg", "per1_div", "per2_div",
+	"per3_div", "per4_div", "ssi1_div", "ssi2_div",
+	"nfc_div", "mshc_div", "vpu_div", "60m",
+	"32k", "usb_div", "dptc",
+};
+
+static const char *ssi_sel_clks[] = { "spll", "mpll", };
+
+enum mx27_clks {
+	dummy, ckih, ckil, mpll, spll, mpll_main2, ahb, ipg, nfc_div, per1_div,
+	per2_div, per3_div, per4_div, vpu_sel, vpu_div, usb_div, cpu_sel,
+	clko_sel, cpu_div, clko_div, ssi1_sel, ssi2_sel, ssi1_div, ssi2_div,
+	clko_en, ssi2_ipg_gate, ssi1_ipg_gate, slcdc_ipg_gate, sdhc3_ipg_gate,
+	sdhc2_ipg_gate, sdhc1_ipg_gate, scc_ipg_gate, sahara_ipg_gate,
+	rtc_ipg_gate, pwm_ipg_gate, owire_ipg_gate, lcdc_ipg_gate,
+	kpp_ipg_gate, iim_ipg_gate, i2c2_ipg_gate, i2c1_ipg_gate,
+	gpt6_ipg_gate, gpt5_ipg_gate, gpt4_ipg_gate, gpt3_ipg_gate,
+	gpt2_ipg_gate, gpt1_ipg_gate, gpio_ipg_gate, fec_ipg_gate,
+	emma_ipg_gate, dma_ipg_gate, cspi3_ipg_gate, cspi2_ipg_gate,
+	cspi1_ipg_gate, nfc_baud_gate, ssi2_baud_gate, ssi1_baud_gate,
+	vpu_baud_gate, per4_gate, per3_gate, per2_gate, per1_gate,
+	usb_ahb_gate, slcdc_ahb_gate, sahara_ahb_gate, lcdc_ahb_gate,
+	vpu_ahb_gate, fec_ahb_gate, emma_ahb_gate, emi_ahb_gate, dma_ahb_gate,
+	csi_ahb_gate, brom_ahb_gate, ata_ahb_gate, wdog_ipg_gate, usb_ipg_gate,
+	uart6_ipg_gate, uart5_ipg_gate, uart4_ipg_gate, uart3_ipg_gate,
+	uart2_ipg_gate, uart1_ipg_gate, clk_max
+};
+
+static struct clk *clk[clk_max];
+
+int __init mx27_clocks_init(unsigned long fref)
+{
+	int i;
+
+	clk[dummy] = imx_clk_fixed("dummy", 0);
+	clk[ckih] = imx_clk_fixed("ckih", fref);
+	clk[ckil] = imx_clk_fixed("ckil", 32768);
+	clk[mpll] = imx_clk_pllv1("mpll", "ckih", CCM_MPCTL0);
+	clk[spll] = imx_clk_pllv1("spll", "ckih", CCM_SPCTL0);
+	clk[mpll_main2] = imx_clk_fixed_factor("mpll_main2", "mpll", 2, 3);
+
+	if (mx27_revision() >= IMX_CHIP_REVISION_2_0) {
+		clk[ahb] = imx_clk_divider("ahb", "mpll_main2", CCM_CSCR, 8, 2);
+		clk[ipg] = imx_clk_fixed_factor("ipg", "ahb", 1, 2);
+	} else {
+		clk[ahb] = imx_clk_divider("ahb", "mpll_main2", CCM_CSCR, 9, 4);
+		clk[ipg] = imx_clk_divider("ipg", "ahb", CCM_CSCR, 8, 1);
+	}
+
+	clk[nfc_div] = imx_clk_divider("nfc_div", "ahb", CCM_PCDR0, 6, 4);
+	clk[per1_div] = imx_clk_divider("per1_div", "mpll_main2", CCM_PCDR1, 0, 6);
+	clk[per2_div] = imx_clk_divider("per2_div", "mpll_main2", CCM_PCDR1, 8, 6);
+	clk[per3_div] = imx_clk_divider("per3_div", "mpll_main2", CCM_PCDR1, 16, 6);
+	clk[per4_div] = imx_clk_divider("per4_div", "mpll_main2", CCM_PCDR1, 24, 6);
+	clk[vpu_sel] = imx_clk_mux("vpu_sel", CCM_CSCR, 21, 1, vpu_sel_clks, ARRAY_SIZE(vpu_sel_clks));
+	clk[vpu_div] = imx_clk_divider("vpu_div", "vpu_sel", CCM_PCDR0, 10, 3);
+	clk[usb_div] = imx_clk_divider("usb_div", "spll", CCM_CSCR, 28, 3);
+	clk[cpu_sel] = imx_clk_mux("cpu_sel", CCM_CSCR, 15, 1, cpu_sel_clks, ARRAY_SIZE(cpu_sel_clks));
+	clk[clko_sel] = imx_clk_mux("clko_sel", CCM_CCSR, 0, 5, clko_sel_clks, ARRAY_SIZE(clko_sel_clks));
+	if (mx27_revision() >= IMX_CHIP_REVISION_2_0)
+		clk[cpu_div] = imx_clk_divider("cpu_div", "cpu_sel", CCM_CSCR, 12, 2);
+	else
+		clk[cpu_div] = imx_clk_divider("cpu_div", "cpu_sel", CCM_CSCR, 13, 3);
+	clk[clko_div] = imx_clk_divider("clko_div", "clko_sel", CCM_PCDR0, 22, 3);
+	clk[ssi1_sel] = imx_clk_mux("ssi1_sel", CCM_CSCR, 22, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks));
+	clk[ssi2_sel] = imx_clk_mux("ssi2_sel", CCM_CSCR, 23, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks));
+	clk[ssi1_div] = imx_clk_divider("ssi1_div", "ssi1_sel", CCM_PCDR0, 16, 6);
+	clk[ssi2_div] = imx_clk_divider("ssi2_div", "ssi2_sel", CCM_PCDR0, 26, 3);
+	clk[clko_en] = imx_clk_gate("clko_en", "clko_div", CCM_PCCR0, 0);
+	clk[ssi2_ipg_gate] = imx_clk_gate("ssi2_ipg_gate", "ipg", CCM_PCCR0, 0);
+	clk[ssi1_ipg_gate] = imx_clk_gate("ssi1_ipg_gate", "ipg", CCM_PCCR0, 1);
+	clk[slcdc_ipg_gate] = imx_clk_gate("slcdc_ipg_gate", "ipg", CCM_PCCR0, 2);
+	clk[sdhc3_ipg_gate] = imx_clk_gate("sdhc3_ipg_gate", "ipg", CCM_PCCR0, 3);
+	clk[sdhc2_ipg_gate] = imx_clk_gate("sdhc2_ipg_gate", "ipg", CCM_PCCR0, 4);
+	clk[sdhc1_ipg_gate] = imx_clk_gate("sdhc1_ipg_gate", "ipg", CCM_PCCR0, 5);
+	clk[scc_ipg_gate] = imx_clk_gate("scc_ipg_gate", "ipg", CCM_PCCR0, 6);
+	clk[sahara_ipg_gate] = imx_clk_gate("sahara_ipg_gate", "ipg", CCM_PCCR0, 7);
+	clk[rtc_ipg_gate] = imx_clk_gate("rtc_ipg_gate", "ipg", CCM_PCCR0, 9);
+	clk[pwm_ipg_gate] = imx_clk_gate("pwm_ipg_gate", "ipg", CCM_PCCR0, 11);
+	clk[owire_ipg_gate] = imx_clk_gate("owire_ipg_gate", "ipg", CCM_PCCR0, 12);
+	clk[lcdc_ipg_gate] = imx_clk_gate("lcdc_ipg_gate", "ipg", CCM_PCCR0, 14);
+	clk[kpp_ipg_gate] = imx_clk_gate("kpp_ipg_gate", "ipg", CCM_PCCR0, 15);
+	clk[iim_ipg_gate] = imx_clk_gate("iim_ipg_gate", "ipg", CCM_PCCR0, 16);
+	clk[i2c2_ipg_gate] = imx_clk_gate("i2c2_ipg_gate", "ipg", CCM_PCCR0, 17);
+	clk[i2c1_ipg_gate] = imx_clk_gate("i2c1_ipg_gate", "ipg", CCM_PCCR0, 18);
+	clk[gpt6_ipg_gate] = imx_clk_gate("gpt6_ipg_gate", "ipg", CCM_PCCR0, 19);
+	clk[gpt5_ipg_gate] = imx_clk_gate("gpt5_ipg_gate", "ipg", CCM_PCCR0, 20);
+	clk[gpt4_ipg_gate] = imx_clk_gate("gpt4_ipg_gate", "ipg", CCM_PCCR0, 21);
+	clk[gpt3_ipg_gate] = imx_clk_gate("gpt3_ipg_gate", "ipg", CCM_PCCR0, 22);
+	clk[gpt2_ipg_gate] = imx_clk_gate("gpt2_ipg_gate", "ipg", CCM_PCCR0, 23);
+	clk[gpt1_ipg_gate] = imx_clk_gate("gpt1_ipg_gate", "ipg", CCM_PCCR0, 24);
+	clk[gpio_ipg_gate] = imx_clk_gate("gpio_ipg_gate", "ipg", CCM_PCCR0, 25);
+	clk[fec_ipg_gate] = imx_clk_gate("fec_ipg_gate", "ipg", CCM_PCCR0, 26);
+	clk[emma_ipg_gate] = imx_clk_gate("emma_ipg_gate", "ipg", CCM_PCCR0, 27);
+	clk[dma_ipg_gate] = imx_clk_gate("dma_ipg_gate", "ipg", CCM_PCCR0, 28);
+	clk[cspi3_ipg_gate] = imx_clk_gate("cspi3_ipg_gate", "ipg", CCM_PCCR0, 29);
+	clk[cspi2_ipg_gate] = imx_clk_gate("cspi2_ipg_gate", "ipg", CCM_PCCR0, 30);
+	clk[cspi1_ipg_gate] = imx_clk_gate("cspi1_ipg_gate", "ipg", CCM_PCCR0, 31);
+	clk[nfc_baud_gate] = imx_clk_gate("nfc_baud_gate", "nfc_div", CCM_PCCR1,  3);
+	clk[ssi2_baud_gate] = imx_clk_gate("ssi2_baud_gate", "ssi2_div", CCM_PCCR1,  4);
+	clk[ssi1_baud_gate] = imx_clk_gate("ssi1_baud_gate", "ssi1_div", CCM_PCCR1,  5);
+	clk[vpu_baud_gate] = imx_clk_gate("vpu_baud_gate", "vpu_div", CCM_PCCR1,  6);
+	clk[per4_gate] = imx_clk_gate("per4_gate", "per4_div", CCM_PCCR1,  7);
+	clk[per3_gate] = imx_clk_gate("per3_gate", "per3_div", CCM_PCCR1,  8);
+	clk[per2_gate] = imx_clk_gate("per2_gate", "per2_div", CCM_PCCR1,  9);
+	clk[per1_gate] = imx_clk_gate("per1_gate", "per1_div", CCM_PCCR1, 10);
+	clk[usb_ahb_gate] = imx_clk_gate("usb_ahb_gate", "ahb", CCM_PCCR1, 11);
+	clk[slcdc_ahb_gate] = imx_clk_gate("slcdc_ahb_gate", "ahb", CCM_PCCR1, 12);
+	clk[sahara_ahb_gate] = imx_clk_gate("sahara_ahb_gate", "ahb", CCM_PCCR1, 13);
+	clk[lcdc_ahb_gate] = imx_clk_gate("lcdc_ahb_gate", "ahb", CCM_PCCR1, 15);
+	clk[vpu_ahb_gate] = imx_clk_gate("vpu_ahb_gate", "ahb", CCM_PCCR1, 16);
+	clk[fec_ahb_gate] = imx_clk_gate("fec_ahb_gate", "ahb", CCM_PCCR1, 17);
+	clk[emma_ahb_gate] = imx_clk_gate("emma_ahb_gate", "ahb", CCM_PCCR1, 18);
+	clk[emi_ahb_gate] = imx_clk_gate("emi_ahb_gate", "ahb", CCM_PCCR1, 19);
+	clk[dma_ahb_gate] = imx_clk_gate("dma_ahb_gate", "ahb", CCM_PCCR1, 20);
+	clk[csi_ahb_gate] = imx_clk_gate("csi_ahb_gate", "ahb", CCM_PCCR1, 21);
+	clk[brom_ahb_gate] = imx_clk_gate("brom_ahb_gate", "ahb", CCM_PCCR1, 22);
+	clk[ata_ahb_gate] = imx_clk_gate("ata_ahb_gate", "ahb", CCM_PCCR1, 23);
+	clk[wdog_ipg_gate] = imx_clk_gate("wdog_ipg_gate", "ipg", CCM_PCCR1, 24);
+	clk[usb_ipg_gate] = imx_clk_gate("usb_ipg_gate", "ipg", CCM_PCCR1, 25);
+	clk[uart6_ipg_gate] = imx_clk_gate("uart6_ipg_gate", "ipg", CCM_PCCR1, 26);
+	clk[uart5_ipg_gate] = imx_clk_gate("uart5_ipg_gate", "ipg", CCM_PCCR1, 27);
+	clk[uart4_ipg_gate] = imx_clk_gate("uart4_ipg_gate", "ipg", CCM_PCCR1, 28);
+	clk[uart3_ipg_gate] = imx_clk_gate("uart3_ipg_gate", "ipg", CCM_PCCR1, 29);
+	clk[uart2_ipg_gate] = imx_clk_gate("uart2_ipg_gate", "ipg", CCM_PCCR1, 30);
+	clk[uart1_ipg_gate] = imx_clk_gate("uart1_ipg_gate", "ipg", CCM_PCCR1, 31);
+
+	for (i = 0; i < ARRAY_SIZE(clk); i++)
+		if (IS_ERR(clk[i]))
+			pr_err("i.MX27 clk %d: register failed with %ld\n",
+				i, PTR_ERR(clk[i]));
+
+	clk_register_clkdev(clk[uart1_ipg_gate], "ipg", "imx21-uart.0");
+	clk_register_clkdev(clk[per1_gate], "per", "imx21-uart.0");
+	clk_register_clkdev(clk[uart2_ipg_gate], "ipg", "imx21-uart.1");
+	clk_register_clkdev(clk[per1_gate], "per", "imx21-uart.1");
+	clk_register_clkdev(clk[uart3_ipg_gate], "ipg", "imx21-uart.2");
+	clk_register_clkdev(clk[per1_gate], "per", "imx21-uart.2");
+	clk_register_clkdev(clk[uart4_ipg_gate], "ipg", "imx21-uart.3");
+	clk_register_clkdev(clk[per1_gate], "per", "imx21-uart.3");
+	clk_register_clkdev(clk[uart5_ipg_gate], "ipg", "imx21-uart.4");
+	clk_register_clkdev(clk[per1_gate], "per", "imx21-uart.4");
+	clk_register_clkdev(clk[uart6_ipg_gate], "ipg", "imx21-uart.5");
+	clk_register_clkdev(clk[per1_gate], "per", "imx21-uart.5");
+	clk_register_clkdev(clk[gpt1_ipg_gate], "ipg", "imx-gpt.0");
+	clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.0");
+	clk_register_clkdev(clk[gpt2_ipg_gate], "ipg", "imx-gpt.1");
+	clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.1");
+	clk_register_clkdev(clk[gpt3_ipg_gate], "ipg", "imx-gpt.2");
+	clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.2");
+	clk_register_clkdev(clk[gpt4_ipg_gate], "ipg", "imx-gpt.3");
+	clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.3");
+	clk_register_clkdev(clk[gpt5_ipg_gate], "ipg", "imx-gpt.4");
+	clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.4");
+	clk_register_clkdev(clk[gpt6_ipg_gate], "ipg", "imx-gpt.5");
+	clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.5");
+	clk_register_clkdev(clk[pwm_ipg_gate], NULL, "mxc_pwm.0");
+	clk_register_clkdev(clk[per2_gate], "per", "mxc-mmc.0");
+	clk_register_clkdev(clk[sdhc1_ipg_gate], "ipg", "mxc-mmc.0");
+	clk_register_clkdev(clk[per2_gate], "per", "mxc-mmc.1");
+	clk_register_clkdev(clk[sdhc2_ipg_gate], "ipg", "mxc-mmc.1");
+	clk_register_clkdev(clk[per2_gate], "per", "mxc-mmc.2");
+	clk_register_clkdev(clk[sdhc2_ipg_gate], "ipg", "mxc-mmc.2");
+	clk_register_clkdev(clk[cspi1_ipg_gate], NULL, "imx27-cspi.0");
+	clk_register_clkdev(clk[cspi2_ipg_gate], NULL, "imx27-cspi.1");
+	clk_register_clkdev(clk[cspi3_ipg_gate], NULL, "imx27-cspi.2");
+	clk_register_clkdev(clk[per3_gate], "per", "imx-fb.0");
+	clk_register_clkdev(clk[lcdc_ipg_gate], "ipg", "imx-fb.0");
+	clk_register_clkdev(clk[lcdc_ahb_gate], "ahb", "imx-fb.0");
+	clk_register_clkdev(clk[csi_ahb_gate], NULL, "mx2-camera.0");
+	clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc");
+	clk_register_clkdev(clk[usb_ipg_gate], "ipg", "fsl-usb2-udc");
+	clk_register_clkdev(clk[usb_ahb_gate], "ahb", "fsl-usb2-udc");
+	clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.0");
+	clk_register_clkdev(clk[usb_ipg_gate], "ipg", "mxc-ehci.0");
+	clk_register_clkdev(clk[usb_ahb_gate], "ahb", "mxc-ehci.0");
+	clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.1");
+	clk_register_clkdev(clk[usb_ipg_gate], "ipg", "mxc-ehci.1");
+	clk_register_clkdev(clk[usb_ahb_gate], "ahb", "mxc-ehci.1");
+	clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2");
+	clk_register_clkdev(clk[usb_ipg_gate], "ipg", "mxc-ehci.2");
+	clk_register_clkdev(clk[usb_ahb_gate], "ahb", "mxc-ehci.2");
+	clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "imx-ssi.0");
+	clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "imx-ssi.1");
+	clk_register_clkdev(clk[nfc_baud_gate], NULL, "mxc_nand.0");
+	clk_register_clkdev(clk[vpu_baud_gate], "per", "imx-vpu");
+	clk_register_clkdev(clk[vpu_ahb_gate], "ahb", "imx-vpu");
+	clk_register_clkdev(clk[dma_ahb_gate], "ahb", "imx-dma");
+	clk_register_clkdev(clk[dma_ipg_gate], "ipg", "imx-dma");
+	clk_register_clkdev(clk[fec_ipg_gate], "ipg", "imx27-fec.0");
+	clk_register_clkdev(clk[fec_ahb_gate], "ahb", "imx27-fec.0");
+	clk_register_clkdev(clk[wdog_ipg_gate], NULL, "imx2-wdt.0");
+	clk_register_clkdev(clk[i2c1_ipg_gate], NULL, "imx-i2c.0");
+	clk_register_clkdev(clk[i2c2_ipg_gate], NULL, "imx-i2c.1");
+	clk_register_clkdev(clk[owire_ipg_gate], NULL, "mxc_w1.0");
+	clk_register_clkdev(clk[kpp_ipg_gate], NULL, "imx-keypad");
+	clk_register_clkdev(clk[emma_ahb_gate], "ahb", "imx-emma");
+	clk_register_clkdev(clk[emma_ipg_gate], "ipg", "imx-emma");
+	clk_register_clkdev(clk[iim_ipg_gate], "iim", NULL);
+	clk_register_clkdev(clk[gpio_ipg_gate], "gpio", NULL);
+	clk_register_clkdev(clk[brom_ahb_gate], "brom", NULL);
+	clk_register_clkdev(clk[ata_ahb_gate], "ata", NULL);
+	clk_register_clkdev(clk[rtc_ipg_gate], "rtc", NULL);
+	clk_register_clkdev(clk[scc_ipg_gate], "scc", NULL);
+	clk_register_clkdev(clk[cpu_div], "cpu", NULL);
+	clk_register_clkdev(clk[emi_ahb_gate], "emi_ahb" , NULL);
+	clk_register_clkdev(clk[ssi1_baud_gate], "bitrate" , "imx-ssi.0");
+	clk_register_clkdev(clk[ssi2_baud_gate], "bitrate" , "imx-ssi.1");
+
+	mxc_timer_init(NULL, MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR),
+			MX27_INT_GPT1);
+
+	clk_prepare_enable(clk[emi_ahb_gate]);
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+int __init mx27_clocks_init_dt(void)
+{
+	struct device_node *np;
+	u32 fref = 26000000; /* default */
+
+	for_each_compatible_node(np, NULL, "fixed-clock") {
+		if (!of_device_is_compatible(np, "fsl,imx-osc26m"))
+			continue;
+
+		if (!of_property_read_u32(np, "clock-frequency", &fref))
+			break;
+	}
+
+	return mx27_clocks_init(fref);
+}
+#endif
diff --git a/arch/arm/mach-imx/clk-imx31.c b/arch/arm/mach-imx/clk-imx31.c
new file mode 100644
index 000000000000..a854b9cae5ea
--- /dev/null
+++ b/arch/arm/mach-imx/clk-imx31.c
@@ -0,0 +1,182 @@
+/*
+ * Copyright (C) 2012 Sascha Hauer <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/io.h>
+#include <linux/err.h>
+
+#include <mach/hardware.h>
+#include <mach/mx31.h>
+#include <mach/common.h>
+
+#include "clk.h"
+#include "crmregs-imx3.h"
+
+static const char *mcu_main_sel[] = { "spll", "mpll", };
+static const char *per_sel[] = { "per_div", "ipg", };
+static const char *csi_sel[] = { "upll", "spll", };
+static const char *fir_sel[] = { "mcu_main", "upll", "spll" };
+
+enum mx31_clks {
+	ckih, ckil, mpll, spll, upll, mcu_main, hsp, ahb, nfc, ipg, per_div,
+	per, csi, fir, csi_div, usb_div_pre, usb_div_post, fir_div_pre,
+	fir_div_post, sdhc1_gate, sdhc2_gate, gpt_gate, epit1_gate, epit2_gate,
+	iim_gate, ata_gate, sdma_gate, cspi3_gate, rng_gate, uart1_gate,
+	uart2_gate, ssi1_gate, i2c1_gate, i2c2_gate, i2c3_gate, hantro_gate,
+	mstick1_gate, mstick2_gate, csi_gate, rtc_gate, wdog_gate, pwm_gate,
+	sim_gate, ect_gate, usb_gate, kpp_gate, ipu_gate, uart3_gate,
+	uart4_gate, uart5_gate, owire_gate, ssi2_gate, cspi1_gate, cspi2_gate,
+	gacc_gate, emi_gate, rtic_gate, firi_gate, clk_max
+};
+
+static struct clk *clk[clk_max];
+
+int __init mx31_clocks_init(unsigned long fref)
+{
+	void __iomem *base = MX31_IO_ADDRESS(MX31_CCM_BASE_ADDR);
+	int i;
+
+	clk[ckih] = imx_clk_fixed("ckih", fref);
+	clk[ckil] = imx_clk_fixed("ckil", 32768);
+	clk[mpll] = imx_clk_pllv1("mpll", "ckih", base + MXC_CCM_MPCTL);
+	clk[spll] = imx_clk_pllv1("spll", "ckih", base + MXC_CCM_SRPCTL);
+	clk[upll] = imx_clk_pllv1("upll", "ckih", base + MXC_CCM_UPCTL);
+	clk[mcu_main] = imx_clk_mux("mcu_main", base + MXC_CCM_PMCR0, 31, 1, mcu_main_sel, ARRAY_SIZE(mcu_main_sel));
+	clk[hsp] = imx_clk_divider("hsp", "mcu_main", base + MXC_CCM_PDR0, 11, 3);
+	clk[ahb] = imx_clk_divider("ahb", "mcu_main", base + MXC_CCM_PDR0, 3, 3);
+	clk[nfc] = imx_clk_divider("nfc", "ahb", base + MXC_CCM_PDR0, 8, 3);
+	clk[ipg] = imx_clk_divider("ipg", "ahb", base + MXC_CCM_PDR0, 6, 2);
+	clk[per_div] = imx_clk_divider("per_div", "upll", base + MXC_CCM_PDR0, 16, 5);
+	clk[per] = imx_clk_mux("per", base + MXC_CCM_CCMR, 24, 1, per_sel, ARRAY_SIZE(per_sel));
+	clk[csi] = imx_clk_mux("csi_sel", base + MXC_CCM_CCMR, 25, 1, csi_sel, ARRAY_SIZE(csi_sel));
+	clk[fir] = imx_clk_mux("fir_sel", base + MXC_CCM_CCMR, 11, 2, fir_sel, ARRAY_SIZE(fir_sel));
+	clk[csi_div] = imx_clk_divider("csi_div", "csi_sel", base + MXC_CCM_PDR0, 23, 9);
+	clk[usb_div_pre] = imx_clk_divider("usb_div_pre", "upll", base + MXC_CCM_PDR1, 30, 2);
+	clk[usb_div_post] = imx_clk_divider("usb_div_post", "usb_div_pre", base + MXC_CCM_PDR1, 27, 3);
+	clk[fir_div_pre] = imx_clk_divider("fir_div_pre", "fir_sel", base + MXC_CCM_PDR1, 24, 3);
+	clk[fir_div_post] = imx_clk_divider("fir_div_post", "fir_div_pre", base + MXC_CCM_PDR1, 23, 6);
+	clk[sdhc1_gate] = imx_clk_gate2("sdhc1_gate", "per", base + MXC_CCM_CGR0, 0);
+	clk[sdhc2_gate] = imx_clk_gate2("sdhc2_gate", "per", base + MXC_CCM_CGR0, 2);
+	clk[gpt_gate] = imx_clk_gate2("gpt_gate", "per", base + MXC_CCM_CGR0, 4);
+	clk[epit1_gate] = imx_clk_gate2("epit1_gate", "per", base + MXC_CCM_CGR0, 6);
+	clk[epit2_gate] = imx_clk_gate2("epit2_gate", "per", base + MXC_CCM_CGR0, 8);
+	clk[iim_gate] = imx_clk_gate2("iim_gate", "ipg", base + MXC_CCM_CGR0, 10);
+	clk[ata_gate] = imx_clk_gate2("ata_gate", "ipg", base + MXC_CCM_CGR0, 12);
+	clk[sdma_gate] = imx_clk_gate2("sdma_gate", "ahb", base + MXC_CCM_CGR0, 14);
+	clk[cspi3_gate] = imx_clk_gate2("cspi3_gate", "ipg", base + MXC_CCM_CGR0, 16);
+	clk[rng_gate] = imx_clk_gate2("rng_gate", "ipg", base + MXC_CCM_CGR0, 18);
+	clk[uart1_gate] = imx_clk_gate2("uart1_gate", "per", base + MXC_CCM_CGR0, 20);
+	clk[uart2_gate] = imx_clk_gate2("uart2_gate", "per", base + MXC_CCM_CGR0, 22);
+	clk[ssi1_gate] = imx_clk_gate2("ssi1_gate", "spll", base + MXC_CCM_CGR0, 24);
+	clk[i2c1_gate] = imx_clk_gate2("i2c1_gate", "per", base + MXC_CCM_CGR0, 26);
+	clk[i2c2_gate] = imx_clk_gate2("i2c2_gate", "per", base + MXC_CCM_CGR0, 28);
+	clk[i2c3_gate] = imx_clk_gate2("i2c3_gate", "per", base + MXC_CCM_CGR0, 30);
+	clk[hantro_gate] = imx_clk_gate2("hantro_gate", "per", base + MXC_CCM_CGR1, 0);
+	clk[mstick1_gate] = imx_clk_gate2("mstick1_gate", "per", base + MXC_CCM_CGR1, 2);
+	clk[mstick2_gate] = imx_clk_gate2("mstick2_gate", "per", base + MXC_CCM_CGR1, 4);
+	clk[csi_gate] = imx_clk_gate2("csi_gate", "csi_div", base + MXC_CCM_CGR1, 6);
+	clk[rtc_gate] = imx_clk_gate2("rtc_gate", "ipg", base + MXC_CCM_CGR1, 8);
+	clk[wdog_gate] = imx_clk_gate2("wdog_gate", "ipg", base + MXC_CCM_CGR1, 10);
+	clk[pwm_gate] = imx_clk_gate2("pwm_gate", "per", base + MXC_CCM_CGR1, 12);
+	clk[sim_gate] = imx_clk_gate2("sim_gate", "per", base + MXC_CCM_CGR1, 14);
+	clk[ect_gate] = imx_clk_gate2("ect_gate", "per", base + MXC_CCM_CGR1, 16);
+	clk[usb_gate] = imx_clk_gate2("usb_gate", "ahb", base + MXC_CCM_CGR1, 18);
+	clk[kpp_gate] = imx_clk_gate2("kpp_gate", "ipg", base + MXC_CCM_CGR1, 20);
+	clk[ipu_gate] = imx_clk_gate2("ipu_gate", "hsp", base + MXC_CCM_CGR1, 22);
+	clk[uart3_gate] = imx_clk_gate2("uart3_gate", "per", base + MXC_CCM_CGR1, 24);
+	clk[uart4_gate] = imx_clk_gate2("uart4_gate", "per", base + MXC_CCM_CGR1, 26);
+	clk[uart5_gate] = imx_clk_gate2("uart5_gate", "per", base + MXC_CCM_CGR1, 28);
+	clk[owire_gate] = imx_clk_gate2("owire_gate", "per", base + MXC_CCM_CGR1, 30);
+	clk[ssi2_gate] = imx_clk_gate2("ssi2_gate", "spll", base + MXC_CCM_CGR2, 0);
+	clk[cspi1_gate] = imx_clk_gate2("cspi1_gate", "ipg", base + MXC_CCM_CGR2, 2);
+	clk[cspi2_gate] = imx_clk_gate2("cspi2_gate", "ipg", base + MXC_CCM_CGR2, 4);
+	clk[gacc_gate] = imx_clk_gate2("gacc_gate", "per", base + MXC_CCM_CGR2, 6);
+	clk[emi_gate] = imx_clk_gate2("emi_gate", "ahb", base + MXC_CCM_CGR2, 8);
+	clk[rtic_gate] = imx_clk_gate2("rtic_gate", "ahb", base + MXC_CCM_CGR2, 10);
+	clk[firi_gate] = imx_clk_gate2("firi_gate", "upll", base+MXC_CCM_CGR2, 12);
+
+	for (i = 0; i < ARRAY_SIZE(clk); i++)
+		if (IS_ERR(clk[i]))
+			pr_err("imx31 clk %d: register failed with %ld\n",
+				i, PTR_ERR(clk[i]));
+
+	clk_register_clkdev(clk[gpt_gate], "per", "imx-gpt.0");
+	clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0");
+	clk_register_clkdev(clk[cspi1_gate], NULL, "imx31-cspi.0");
+	clk_register_clkdev(clk[cspi2_gate], NULL, "imx31-cspi.1");
+	clk_register_clkdev(clk[cspi3_gate], NULL, "imx31-cspi.2");
+	clk_register_clkdev(clk[pwm_gate], "pwm", NULL);
+	clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
+	clk_register_clkdev(clk[rtc_gate], "rtc", NULL);
+	clk_register_clkdev(clk[epit1_gate], "epit", NULL);
+	clk_register_clkdev(clk[epit2_gate], "epit", NULL);
+	clk_register_clkdev(clk[nfc], NULL, "mxc_nand.0");
+	clk_register_clkdev(clk[ipu_gate], NULL, "ipu-core");
+	clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb");
+	clk_register_clkdev(clk[kpp_gate], "kpp", NULL);
+	clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.0");
+	clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.0");
+	clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.0");
+	clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.1");
+	clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.1");
+	clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.1");
+	clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.2");
+	clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.2");
+	clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
+	clk_register_clkdev(clk[usb_div_post], "per", "fsl-usb2-udc");
+	clk_register_clkdev(clk[usb_gate], "ahb", "fsl-usb2-udc");
+	clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc");
+	clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0");
+	/* i.mx31 has the i.mx21 type uart */
+	clk_register_clkdev(clk[uart1_gate], "per", "imx21-uart.0");
+	clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.0");
+	clk_register_clkdev(clk[uart2_gate], "per", "imx21-uart.1");
+	clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.1");
+	clk_register_clkdev(clk[uart3_gate], "per", "imx21-uart.2");
+	clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.2");
+	clk_register_clkdev(clk[uart4_gate], "per", "imx21-uart.3");
+	clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.3");
+	clk_register_clkdev(clk[uart5_gate], "per", "imx21-uart.4");
+	clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.4");
+	clk_register_clkdev(clk[i2c1_gate], NULL, "imx-i2c.0");
+	clk_register_clkdev(clk[i2c2_gate], NULL, "imx-i2c.1");
+	clk_register_clkdev(clk[i2c3_gate], NULL, "imx-i2c.2");
+	clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1.0");
+	clk_register_clkdev(clk[sdhc1_gate], NULL, "mxc-mmc.0");
+	clk_register_clkdev(clk[sdhc2_gate], NULL, "mxc-mmc.1");
+	clk_register_clkdev(clk[ssi1_gate], NULL, "imx-ssi.0");
+	clk_register_clkdev(clk[ssi2_gate], NULL, "imx-ssi.1");
+	clk_register_clkdev(clk[firi_gate], "firi", NULL);
+	clk_register_clkdev(clk[ata_gate], NULL, "pata_imx");
+	clk_register_clkdev(clk[rtic_gate], "rtic", NULL);
+	clk_register_clkdev(clk[rng_gate], "rng", NULL);
+	clk_register_clkdev(clk[sdma_gate], NULL, "imx31-sdma");
+	clk_register_clkdev(clk[iim_gate], "iim", NULL);
+
+	clk_set_parent(clk[csi], clk[upll]);
+	clk_prepare_enable(clk[emi_gate]);
+	clk_prepare_enable(clk[iim_gate]);
+	mx31_revision();
+	clk_disable_unprepare(clk[iim_gate]);
+
+	mxc_timer_init(NULL, MX31_IO_ADDRESS(MX31_GPT1_BASE_ADDR),
+			MX31_INT_GPT);
+
+	return 0;
+}
diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c
new file mode 100644
index 000000000000..a9e60bf7dd75
--- /dev/null
+++ b/arch/arm/mach-imx/clk-imx35.c
@@ -0,0 +1,278 @@
+/*
+ * Copyright (C) 2012 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/clkdev.h>
+#include <linux/of.h>
+#include <linux/err.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+
+#include "crmregs-imx3.h"
+#include "clk.h"
+
+struct arm_ahb_div {
+	unsigned char arm, ahb, sel;
+};
+
+static struct arm_ahb_div clk_consumer[] = {
+	{ .arm = 1, .ahb = 4, .sel = 0},
+	{ .arm = 1, .ahb = 3, .sel = 1},
+	{ .arm = 2, .ahb = 2, .sel = 0},
+	{ .arm = 0, .ahb = 0, .sel = 0},
+	{ .arm = 0, .ahb = 0, .sel = 0},
+	{ .arm = 0, .ahb = 0, .sel = 0},
+	{ .arm = 4, .ahb = 1, .sel = 0},
+	{ .arm = 1, .ahb = 5, .sel = 0},
+	{ .arm = 1, .ahb = 8, .sel = 0},
+	{ .arm = 1, .ahb = 6, .sel = 1},
+	{ .arm = 2, .ahb = 4, .sel = 0},
+	{ .arm = 0, .ahb = 0, .sel = 0},
+	{ .arm = 0, .ahb = 0, .sel = 0},
+	{ .arm = 0, .ahb = 0, .sel = 0},
+	{ .arm = 4, .ahb = 2, .sel = 0},
+	{ .arm = 0, .ahb = 0, .sel = 0},
+};
+
+static char hsp_div_532[] = { 4, 8, 3, 0 };
+static char hsp_div_400[] = { 3, 6, 3, 0 };
+
+static const char *std_sel[] = {"ppll", "arm"};
+static const char *ipg_per_sel[] = {"ahb_per_div", "arm_per_div"};
+
+enum mx35_clks {
+	ckih, mpll, ppll, mpll_075, arm, hsp, hsp_div, hsp_sel, ahb, ipg,
+	arm_per_div, ahb_per_div, ipg_per, uart_sel, uart_div, esdhc_sel,
+	esdhc1_div, esdhc2_div, esdhc3_div, spdif_sel, spdif_div_pre,
+	spdif_div_post, ssi_sel, ssi1_div_pre, ssi1_div_post, ssi2_div_pre,
+	ssi2_div_post, usb_sel, usb_div, nfc_div, asrc_gate, pata_gate,
+	audmux_gate, can1_gate, can2_gate, cspi1_gate, cspi2_gate, ect_gate,
+	edio_gate, emi_gate, epit1_gate, epit2_gate, esai_gate, esdhc1_gate,
+	esdhc2_gate, esdhc3_gate, fec_gate, gpio1_gate, gpio2_gate, gpio3_gate,
+	gpt_gate, i2c1_gate, i2c2_gate, i2c3_gate, iomuxc_gate, ipu_gate,
+	kpp_gate, mlb_gate, mshc_gate, owire_gate, pwm_gate, rngc_gate,
+	rtc_gate, rtic_gate, scc_gate, sdma_gate, spba_gate, spdif_gate,
+	ssi1_gate, ssi2_gate, uart1_gate, uart2_gate, uart3_gate, usbotg_gate,
+	wdog_gate, max_gate, admux_gate, csi_gate, iim_gate, gpu2d_gate,
+	clk_max
+};
+
+static struct clk *clk[clk_max];
+
+int __init mx35_clocks_init()
+{
+	void __iomem *base = MX35_IO_ADDRESS(MX35_CCM_BASE_ADDR);
+	u32 pdr0, consumer_sel, hsp_sel;
+	struct arm_ahb_div *aad;
+	unsigned char *hsp_div;
+	int i;
+
+	pdr0 = __raw_readl(base + MXC_CCM_PDR0);
+	consumer_sel = (pdr0 >> 16) & 0xf;
+	aad = &clk_consumer[consumer_sel];
+	if (!aad->arm) {
+		pr_err("i.MX35 clk: illegal consumer mux selection 0x%x\n", consumer_sel);
+		/*
+		 * We are basically stuck. Continue with a default entry and hope we
+		 * get far enough to actually show the above message
+		 */
+		aad = &clk_consumer[0];
+	}
+
+	clk[ckih] = imx_clk_fixed("ckih", 24000000);
+	clk[mpll] = imx_clk_pllv1("mpll", "ckih", base + MX35_CCM_MPCTL);
+	clk[ppll] = imx_clk_pllv1("ppll", "ckih", base + MX35_CCM_PPCTL);
+
+	clk[mpll] = imx_clk_fixed_factor("mpll_075", "mpll", 3, 4);
+
+	if (aad->sel)
+		clk[arm] = imx_clk_fixed_factor("arm", "mpll_075", 1, aad->arm);
+	else
+		clk[arm] = imx_clk_fixed_factor("arm", "mpll", 1, aad->arm);
+
+	if (clk_get_rate(clk[arm]) > 400000000)
+		hsp_div = hsp_div_532;
+	else
+		hsp_div = hsp_div_400;
+
+	hsp_sel = (pdr0 >> 20) & 0x3;
+	if (!hsp_div[hsp_sel]) {
+		pr_err("i.MX35 clk: illegal hsp clk selection 0x%x\n", hsp_sel);
+		hsp_sel = 0;
+	}
+
+	clk[hsp] = imx_clk_fixed_factor("hsp", "arm", 1, hsp_div[hsp_sel]);
+
+	clk[ahb] = imx_clk_fixed_factor("ahb", "arm", 1, aad->ahb);
+	clk[ipg] = imx_clk_fixed_factor("ipg", "ahb", 1, 2);
+
+	clk[arm_per_div] = imx_clk_divider("arm_per_div", "arm", base + MX35_CCM_PDR4, 16, 6);
+	clk[ahb_per_div] = imx_clk_divider("ahb_per_div", "ahb", base + MXC_CCM_PDR0, 12, 3);
+	clk[ipg_per] = imx_clk_mux("ipg_per", base + MXC_CCM_PDR0, 26, 1, ipg_per_sel, ARRAY_SIZE(ipg_per_sel));
+
+	clk[uart_sel] = imx_clk_mux("uart_sel", base + MX35_CCM_PDR3, 14, 1, std_sel, ARRAY_SIZE(std_sel));
+	clk[uart_div] = imx_clk_divider("uart_div", "uart_sel", base + MX35_CCM_PDR4, 10, 6);
+
+	clk[esdhc_sel] = imx_clk_mux("esdhc_sel", base + MX35_CCM_PDR4, 9, 1, std_sel, ARRAY_SIZE(std_sel));
+	clk[esdhc1_div] = imx_clk_divider("esdhc1_div", "esdhc_sel", base + MX35_CCM_PDR3, 0, 6);
+	clk[esdhc2_div] = imx_clk_divider("esdhc2_div", "esdhc_sel", base + MX35_CCM_PDR3, 8, 6);
+	clk[esdhc3_div] = imx_clk_divider("esdhc3_div", "esdhc_sel", base + MX35_CCM_PDR3, 16, 6);
+
+	clk[spdif_sel] = imx_clk_mux("spdif_sel", base + MX35_CCM_PDR3, 22, 1, std_sel, ARRAY_SIZE(std_sel));
+	clk[spdif_div_pre] = imx_clk_divider("spdif_div_pre", "spdif_sel", base + MX35_CCM_PDR3, 29, 3); /* divide by 1 not allowed */ 
+	clk[spdif_div_post] = imx_clk_divider("spdif_div_post", "spdif_div_pre", base + MX35_CCM_PDR3, 23, 6);
+
+	clk[ssi_sel] = imx_clk_mux("ssi_sel", base + MX35_CCM_PDR2, 6, 1, std_sel, ARRAY_SIZE(std_sel));
+	clk[ssi1_div_pre] = imx_clk_divider("ssi1_div_pre", "ssi_sel", base + MX35_CCM_PDR2, 24, 3);
+	clk[ssi1_div_post] = imx_clk_divider("ssi1_div_post", "ssi1_div_pre", base + MX35_CCM_PDR2, 0, 6);
+	clk[ssi2_div_pre] = imx_clk_divider("ssi2_div_pre", "ssi_sel", base + MX35_CCM_PDR2, 27, 3);
+	clk[ssi2_div_post] = imx_clk_divider("ssi2_div_post", "ssi2_div_pre", base + MX35_CCM_PDR2, 8, 6);
+
+	clk[usb_sel] = imx_clk_mux("usb_sel", base + MX35_CCM_PDR4, 9, 1, std_sel, ARRAY_SIZE(std_sel));
+	clk[usb_div] = imx_clk_divider("usb_div", "usb_sel", base + MX35_CCM_PDR4, 22, 6);
+
+	clk[nfc_div] = imx_clk_divider("nfc_div", "ahb", base + MX35_CCM_PDR4, 28, 4);
+
+	clk[asrc_gate] = imx_clk_gate2("asrc_gate", "ipg", base + MX35_CCM_CGR0,  0);
+	clk[pata_gate] = imx_clk_gate2("pata_gate", "ipg", base + MX35_CCM_CGR0,  2);
+	clk[audmux_gate] = imx_clk_gate2("audmux_gate", "ipg", base + MX35_CCM_CGR0,  4);
+	clk[can1_gate] = imx_clk_gate2("can1_gate", "ipg", base + MX35_CCM_CGR0,  6);
+	clk[can2_gate] = imx_clk_gate2("can2_gate", "ipg", base + MX35_CCM_CGR0,  8);
+	clk[cspi1_gate] = imx_clk_gate2("cspi1_gate", "ipg", base + MX35_CCM_CGR0, 10);
+	clk[cspi2_gate] = imx_clk_gate2("cspi2_gate", "ipg", base + MX35_CCM_CGR0, 12);
+	clk[ect_gate] = imx_clk_gate2("ect_gate", "ipg", base + MX35_CCM_CGR0, 14);
+	clk[edio_gate] = imx_clk_gate2("edio_gate",   "ipg", base + MX35_CCM_CGR0, 16);
+	clk[emi_gate] = imx_clk_gate2("emi_gate", "ipg", base + MX35_CCM_CGR0, 18);
+	clk[epit1_gate] = imx_clk_gate2("epit1_gate", "ipg", base + MX35_CCM_CGR0, 20);
+	clk[epit2_gate] = imx_clk_gate2("epit2_gate", "ipg", base + MX35_CCM_CGR0, 22);
+	clk[esai_gate] = imx_clk_gate2("esai_gate",   "ipg", base + MX35_CCM_CGR0, 24);
+	clk[esdhc1_gate] = imx_clk_gate2("esdhc1_gate", "esdhc1_div", base + MX35_CCM_CGR0, 26);
+	clk[esdhc2_gate] = imx_clk_gate2("esdhc2_gate", "esdhc2_div", base + MX35_CCM_CGR0, 28);
+	clk[esdhc3_gate] = imx_clk_gate2("esdhc3_gate", "esdhc3_div", base + MX35_CCM_CGR0, 30);
+
+	clk[fec_gate] = imx_clk_gate2("fec_gate", "ipg", base + MX35_CCM_CGR1,  0);
+	clk[gpio1_gate] = imx_clk_gate2("gpio1_gate", "ipg", base + MX35_CCM_CGR1,  2);
+	clk[gpio2_gate] = imx_clk_gate2("gpio2_gate", "ipg", base + MX35_CCM_CGR1,  4);
+	clk[gpio3_gate] = imx_clk_gate2("gpio3_gate", "ipg", base + MX35_CCM_CGR1,  6);
+	clk[gpt_gate] = imx_clk_gate2("gpt_gate", "ipg", base + MX35_CCM_CGR1,  8);
+	clk[i2c1_gate] = imx_clk_gate2("i2c1_gate", "ipg_per", base + MX35_CCM_CGR1, 10);
+	clk[i2c2_gate] = imx_clk_gate2("i2c2_gate", "ipg_per", base + MX35_CCM_CGR1, 12);
+	clk[i2c3_gate] = imx_clk_gate2("i2c3_gate", "ipg_per", base + MX35_CCM_CGR1, 14);
+	clk[iomuxc_gate] = imx_clk_gate2("iomuxc_gate", "ipg", base + MX35_CCM_CGR1, 16);
+	clk[ipu_gate] = imx_clk_gate2("ipu_gate", "hsp", base + MX35_CCM_CGR1, 18);
+	clk[kpp_gate] = imx_clk_gate2("kpp_gate", "ipg", base + MX35_CCM_CGR1, 20);
+	clk[mlb_gate] = imx_clk_gate2("mlb_gate", "ahb", base + MX35_CCM_CGR1, 22);
+	clk[mshc_gate] = imx_clk_gate2("mshc_gate", "dummy", base + MX35_CCM_CGR1, 24);
+	clk[owire_gate] = imx_clk_gate2("owire_gate", "ipg_per", base + MX35_CCM_CGR1, 26);
+	clk[pwm_gate] = imx_clk_gate2("pwm_gate", "ipg_per", base + MX35_CCM_CGR1, 28);
+	clk[rngc_gate] = imx_clk_gate2("rngc_gate", "ipg", base + MX35_CCM_CGR1, 30);
+
+	clk[rtc_gate] = imx_clk_gate2("rtc_gate", "ipg", base + MX35_CCM_CGR2,  0);
+	clk[rtic_gate] = imx_clk_gate2("rtic_gate", "ahb", base + MX35_CCM_CGR2,  2);
+	clk[scc_gate] = imx_clk_gate2("scc_gate", "ipg", base + MX35_CCM_CGR2,  4);
+	clk[sdma_gate] = imx_clk_gate2("sdma_gate", "ahb", base + MX35_CCM_CGR2,  6);
+	clk[spba_gate] = imx_clk_gate2("spba_gate", "ipg", base + MX35_CCM_CGR2,  8);
+	clk[spdif_gate] = imx_clk_gate2("spdif_gate", "spdif_div_post", base + MX35_CCM_CGR2, 10);
+	clk[ssi1_gate] = imx_clk_gate2("ssi1_gate", "ssi1_div_post", base + MX35_CCM_CGR2, 12);
+	clk[ssi2_gate] = imx_clk_gate2("ssi2_gate", "ssi2_div_post", base + MX35_CCM_CGR2, 14);
+	clk[uart1_gate] = imx_clk_gate2("uart1_gate", "uart_div", base + MX35_CCM_CGR2, 16);
+	clk[uart2_gate] = imx_clk_gate2("uart2_gate", "uart_div", base + MX35_CCM_CGR2, 18);
+	clk[uart3_gate] = imx_clk_gate2("uart3_gate", "uart_div", base + MX35_CCM_CGR2, 20);
+	clk[usbotg_gate] = imx_clk_gate2("usbotg_gate", "ahb", base + MX35_CCM_CGR2, 22);
+	clk[wdog_gate] = imx_clk_gate2("wdog_gate", "ipg", base + MX35_CCM_CGR2, 24);
+	clk[max_gate] = imx_clk_gate2("max_gate", "dummy", base + MX35_CCM_CGR2, 26);
+	clk[admux_gate] = imx_clk_gate2("admux_gate", "ipg", base + MX35_CCM_CGR2, 30);
+
+	clk[csi_gate] = imx_clk_gate2("csi_gate", "ipg", base + MX35_CCM_CGR3,  0);
+	clk[iim_gate] = imx_clk_gate2("iim_gate", "ipg", base + MX35_CCM_CGR3,  2);
+	clk[gpu2d_gate] = imx_clk_gate2("gpu2d_gate", "ahb", base + MX35_CCM_CGR3,  4);
+
+	for (i = 0; i < ARRAY_SIZE(clk); i++)
+		if (IS_ERR(clk[i]))
+			pr_err("i.MX35 clk %d: register failed with %ld\n",
+				i, PTR_ERR(clk[i]));
+
+
+	clk_register_clkdev(clk[pata_gate], NULL, "pata_imx");
+	clk_register_clkdev(clk[can1_gate], NULL, "flexcan.0");
+	clk_register_clkdev(clk[can2_gate], NULL, "flexcan.1");
+	clk_register_clkdev(clk[cspi1_gate], "per", "imx35-cspi.0");
+	clk_register_clkdev(clk[cspi1_gate], "ipg", "imx35-cspi.0");
+	clk_register_clkdev(clk[cspi2_gate], "per", "imx35-cspi.1");
+	clk_register_clkdev(clk[cspi2_gate], "ipg", "imx35-cspi.1");
+	clk_register_clkdev(clk[epit1_gate], NULL, "imx-epit.0");
+	clk_register_clkdev(clk[epit2_gate], NULL, "imx-epit.1");
+	clk_register_clkdev(clk[esdhc1_gate], "per", "sdhci-esdhc-imx35.0");
+	clk_register_clkdev(clk[ipg], "ipg", "sdhci-esdhc-imx35.0");
+	clk_register_clkdev(clk[ahb], "ahb", "sdhci-esdhc-imx35.0");
+	clk_register_clkdev(clk[esdhc2_gate], "per", "sdhci-esdhc-imx35.1");
+	clk_register_clkdev(clk[ipg], "ipg", "sdhci-esdhc-imx35.1");
+	clk_register_clkdev(clk[ahb], "ahb", "sdhci-esdhc-imx35.1");
+	clk_register_clkdev(clk[esdhc3_gate], "per", "sdhci-esdhc-imx35.2");
+	clk_register_clkdev(clk[ipg], "ipg", "sdhci-esdhc-imx35.2");
+	clk_register_clkdev(clk[ahb], "ahb", "sdhci-esdhc-imx35.2");
+	/* i.mx35 has the i.mx27 type fec */
+	clk_register_clkdev(clk[fec_gate], NULL, "imx27-fec.0");
+	clk_register_clkdev(clk[gpt_gate], "per", "imx-gpt.0");
+	clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0");
+	clk_register_clkdev(clk[i2c1_gate], NULL, "imx-i2c.0");
+	clk_register_clkdev(clk[i2c2_gate], NULL, "imx-i2c.1");
+	clk_register_clkdev(clk[i2c3_gate], NULL, "imx-i2c.2");
+	clk_register_clkdev(clk[ipu_gate], NULL, "ipu-core");
+	clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb");
+	clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1");
+	clk_register_clkdev(clk[sdma_gate], NULL, "imx35-sdma");
+	clk_register_clkdev(clk[ipg], "ipg", "imx-ssi.0");
+	clk_register_clkdev(clk[ssi1_div_post], "per", "imx-ssi.0");
+	clk_register_clkdev(clk[ipg], "ipg", "imx-ssi.1");
+	clk_register_clkdev(clk[ssi2_div_post], "per", "imx-ssi.1");
+	/* i.mx35 has the i.mx21 type uart */
+	clk_register_clkdev(clk[uart1_gate], "per", "imx21-uart.0");
+	clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.0");
+	clk_register_clkdev(clk[uart2_gate], "per", "imx21-uart.1");
+	clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.1");
+	clk_register_clkdev(clk[uart3_gate], "per", "imx21-uart.2");
+	clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.2");
+	clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.0");
+	clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.0");
+	clk_register_clkdev(clk[usbotg_gate], "ahb", "mxc-ehci.0");
+	clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.1");
+	clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.1");
+	clk_register_clkdev(clk[usbotg_gate], "ahb", "mxc-ehci.1");
+	clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2");
+	clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
+	clk_register_clkdev(clk[usbotg_gate], "ahb", "mxc-ehci.2");
+	clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc");
+	clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc");
+	clk_register_clkdev(clk[usbotg_gate], "ahb", "fsl-usb2-udc");
+	clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
+	clk_register_clkdev(clk[nfc_div], NULL, "mxc_nand.0");
+
+	clk_prepare_enable(clk[spba_gate]);
+	clk_prepare_enable(clk[gpio1_gate]);
+	clk_prepare_enable(clk[gpio2_gate]);
+	clk_prepare_enable(clk[gpio3_gate]);
+	clk_prepare_enable(clk[iim_gate]);
+	clk_prepare_enable(clk[emi_gate]);
+
+	imx_print_silicon_rev("i.MX35", mx35_revision());
+
+#ifdef CONFIG_MXC_USE_EPIT
+	epit_timer_init(&epit1_clk,
+			MX35_IO_ADDRESS(MX35_EPIT1_BASE_ADDR), MX35_INT_EPIT1);
+#else
+	mxc_timer_init(NULL, MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR),
+			MX35_INT_GPT);
+#endif
+
+	return 0;
+}
diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c
new file mode 100644
index 000000000000..fcd94f3b0f0e
--- /dev/null
+++ b/arch/arm/mach-imx/clk-imx51-imx53.c
@@ -0,0 +1,506 @@
+/*
+ * Copyright (C) 2011 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/clkdev.h>
+#include <linux/of.h>
+#include <linux/err.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+
+#include "crm-regs-imx5.h"
+#include "clk.h"
+
+/* Low-power Audio Playback Mode clock */
+static const char *lp_apm_sel[] = { "osc", };
+
+/* This is used multiple times */
+static const char *standard_pll_sel[] = { "pll1_sw", "pll2_sw", "pll3_sw", "lp_apm", };
+static const char *periph_apm_sel[] = { "pll1_sw", "pll3_sw", "lp_apm", };
+static const char *main_bus_sel[] = { "pll2_sw", "periph_apm", };
+static const char *per_lp_apm_sel[] = { "main_bus", "lp_apm", };
+static const char *per_root_sel[] = { "per_podf", "ipg", };
+static const char *esdhc_c_sel[] = { "esdhc_a_podf", "esdhc_b_podf", };
+static const char *esdhc_d_sel[] = { "esdhc_a_podf", "esdhc_b_podf", };
+static const char *ssi_apm_sels[] = { "ckih1", "lp_amp", "ckih2", };
+static const char *ssi_clk_sels[] = { "pll1_sw", "pll2_sw", "pll3_sw", "ssi_apm", };
+static const char *ssi3_clk_sels[] = { "ssi1_root_gate", "ssi2_root_gate", };
+static const char *ssi_ext1_com_sels[] = { "ssi_ext1_podf", "ssi1_root_gate", };
+static const char *ssi_ext2_com_sels[] = { "ssi_ext2_podf", "ssi2_root_gate", };
+static const char *emi_slow_sel[] = { "main_bus", "ahb", };
+static const char *usb_phy_sel_str[] = { "osc", "usb_phy_podf", };
+static const char *mx51_ipu_di0_sel[] = { "di_pred", "osc", "ckih1", "tve_di", };
+static const char *mx53_ipu_di0_sel[] = { "di_pred", "osc", "ckih1", "di_pll4_podf", "dummy", "ldb_di0", };
+static const char *mx53_ldb_di0_sel[] = { "pll3_sw", "pll4_sw", };
+static const char *mx51_ipu_di1_sel[] = { "di_pred", "osc", "ckih1", "tve_di", "ipp_di1", };
+static const char *mx53_ipu_di1_sel[] = { "di_pred", "osc", "ckih1", "tve_di", "ipp_di1", "ldb_di1", };
+static const char *mx53_ldb_di1_sel[] = { "pll3_sw", "pll4_sw", };
+static const char *mx51_tve_ext_sel[] = { "osc", "ckih1", };
+static const char *mx53_tve_ext_sel[] = { "pll4_sw", "ckih1", };
+static const char *tve_sel[] = { "tve_pred", "tve_ext_sel", };
+static const char *ipu_sel[] = { "axi_a", "axi_b", "emi_slow_gate", "ahb", };
+static const char *vpu_sel[] = { "axi_a", "axi_b", "emi_slow_gate", "ahb", };
+
+enum imx5_clks {
+	dummy, ckil, osc, ckih1, ckih2, ahb, ipg, axi_a, axi_b, uart_pred,
+	uart_root, esdhc_a_pred, esdhc_b_pred, esdhc_c_s, esdhc_d_s,
+	emi_sel, emi_slow_podf, nfc_podf, ecspi_pred, ecspi_podf, usboh3_pred,
+	usboh3_podf, usb_phy_pred, usb_phy_podf, cpu_podf, di_pred, tve_di,
+	tve_s, uart1_ipg_gate, uart1_per_gate, uart2_ipg_gate,
+	uart2_per_gate, uart3_ipg_gate, uart3_per_gate, i2c1_gate, i2c2_gate,
+	gpt_ipg_gate, pwm1_ipg_gate, pwm1_hf_gate, pwm2_ipg_gate, pwm2_hf_gate,
+	gpt_gate, fec_gate, usboh3_per_gate, esdhc1_ipg_gate, esdhc2_ipg_gate,
+	esdhc3_ipg_gate, esdhc4_ipg_gate, ssi1_ipg_gate, ssi2_ipg_gate,
+	ssi3_ipg_gate, ecspi1_ipg_gate, ecspi1_per_gate, ecspi2_ipg_gate,
+	ecspi2_per_gate, cspi_ipg_gate, sdma_gate, emi_slow_gate, ipu_s,
+	ipu_gate, nfc_gate, ipu_di1_gate, vpu_s, vpu_gate,
+	vpu_reference_gate, uart4_ipg_gate, uart4_per_gate, uart5_ipg_gate,
+	uart5_per_gate, tve_gate, tve_pred, esdhc1_per_gate, esdhc2_per_gate,
+	esdhc3_per_gate, esdhc4_per_gate, usb_phy_gate, hsi2c_gate,
+	mipi_hsc1_gate, mipi_hsc2_gate, mipi_esc_gate, mipi_hsp_gate,
+	ldb_di1_div_3_5, ldb_di1_div, ldb_di0_div_3_5, ldb_di0_div,
+	ldb_di1_gate, can2_serial_gate, can2_ipg_gate, i2c3_gate, lp_apm,
+	periph_apm, main_bus, ahb_max, aips_tz1, aips_tz2, tmax1, tmax2,
+	tmax3, spba, uart_sel, esdhc_a_sel, esdhc_b_sel, esdhc_a_podf,
+	esdhc_b_podf, ecspi_sel, usboh3_sel, usb_phy_sel, iim_gate,
+	usboh3_gate, emi_fast_gate, ipu_di0_gate,gpc_dvfs, pll1_sw, pll2_sw,
+	pll3_sw, ipu_di0_sel, ipu_di1_sel, tve_ext_sel, mx51_mipi, pll4_sw,
+	ldb_di1_sel, di_pll4_podf, ldb_di0_sel, ldb_di0_gate, usb_phy1_gate,
+	usb_phy2_gate, per_lp_apm, per_pred1, per_pred2, per_podf, per_root,
+	ssi_apm, ssi1_root_sel, ssi2_root_sel, ssi3_root_sel, ssi_ext1_sel,
+	ssi_ext2_sel, ssi_ext1_com_sel, ssi_ext2_com_sel, ssi1_root_pred,
+	ssi1_root_podf, ssi2_root_pred, ssi2_root_podf, ssi_ext1_pred,
+	ssi_ext1_podf, ssi_ext2_pred, ssi_ext2_podf, ssi1_root_gate,
+	ssi2_root_gate, ssi3_root_gate, ssi_ext1_gate, ssi_ext2_gate,
+	clk_max
+};
+
+static struct clk *clk[clk_max];
+
+static void __init mx5_clocks_common_init(unsigned long rate_ckil,
+		unsigned long rate_osc, unsigned long rate_ckih1,
+		unsigned long rate_ckih2)
+{
+	int i;
+
+	clk[dummy] = imx_clk_fixed("dummy", 0);
+	clk[ckil] = imx_clk_fixed("ckil", rate_ckil);
+	clk[osc] = imx_clk_fixed("osc", rate_osc);
+	clk[ckih1] = imx_clk_fixed("ckih1", rate_ckih1);
+	clk[ckih2] = imx_clk_fixed("ckih2", rate_ckih2);
+
+	clk[lp_apm] = imx_clk_mux("lp_apm", MXC_CCM_CCSR, 9, 1,
+				lp_apm_sel, ARRAY_SIZE(lp_apm_sel));
+	clk[periph_apm] = imx_clk_mux("periph_apm", MXC_CCM_CBCMR, 12, 2,
+				periph_apm_sel, ARRAY_SIZE(periph_apm_sel));
+	clk[main_bus] = imx_clk_mux("main_bus", MXC_CCM_CBCDR, 25, 1,
+				main_bus_sel, ARRAY_SIZE(main_bus_sel));
+	clk[per_lp_apm] = imx_clk_mux("per_lp_apm", MXC_CCM_CBCDR, 1, 1,
+				per_lp_apm_sel, ARRAY_SIZE(per_lp_apm_sel));
+	clk[per_pred1] = imx_clk_divider("per_pred1", "per_lp_apm", MXC_CCM_CBCDR, 6, 2);
+	clk[per_pred2] = imx_clk_divider("per_pred2", "per_pred1", MXC_CCM_CBCDR, 3, 3);
+	clk[per_podf] = imx_clk_divider("per_podf", "per_pred2", MXC_CCM_CBCDR, 0, 3);
+	clk[per_root] = imx_clk_mux("per_root", MXC_CCM_CBCDR, 1, 0,
+				per_root_sel, ARRAY_SIZE(per_root_sel));
+	clk[ahb] = imx_clk_divider("ahb", "main_bus", MXC_CCM_CBCDR, 10, 3);
+	clk[ahb_max] = imx_clk_gate2("ahb_max", "ahb", MXC_CCM_CCGR0, 28);
+	clk[aips_tz1] = imx_clk_gate2("aips_tz1", "ahb", MXC_CCM_CCGR0, 24);
+	clk[aips_tz2] = imx_clk_gate2("aips_tz2", "ahb", MXC_CCM_CCGR0, 26);
+	clk[tmax1] = imx_clk_gate2("tmax1", "ahb", MXC_CCM_CCGR1, 0);
+	clk[tmax2] = imx_clk_gate2("tmax2", "ahb", MXC_CCM_CCGR1, 2);
+	clk[tmax3] = imx_clk_gate2("tmax3", "ahb", MXC_CCM_CCGR1, 4);
+	clk[spba] = imx_clk_gate2("spba", "ipg", MXC_CCM_CCGR5, 0);
+	clk[ipg] = imx_clk_divider("ipg", "ahb", MXC_CCM_CBCDR, 8, 2);
+	clk[axi_a] = imx_clk_divider("axi_a", "main_bus", MXC_CCM_CBCDR, 16, 3);
+	clk[axi_b] = imx_clk_divider("axi_b", "main_bus", MXC_CCM_CBCDR, 19, 3);
+	clk[uart_sel] = imx_clk_mux("uart_sel", MXC_CCM_CSCMR1, 24, 2,
+				standard_pll_sel, ARRAY_SIZE(standard_pll_sel));
+	clk[uart_pred] = imx_clk_divider("uart_pred", "uart_sel", MXC_CCM_CSCDR1, 3, 3);
+	clk[uart_root] = imx_clk_divider("uart_root", "uart_pred", MXC_CCM_CSCDR1, 0, 3);
+
+	clk[esdhc_a_sel] = imx_clk_mux("esdhc_a_sel", MXC_CCM_CSCMR1, 20, 2,
+				standard_pll_sel, ARRAY_SIZE(standard_pll_sel));
+	clk[esdhc_b_sel] = imx_clk_mux("esdhc_b_sel", MXC_CCM_CSCMR1, 16, 2,
+				standard_pll_sel, ARRAY_SIZE(standard_pll_sel));
+	clk[esdhc_a_pred] = imx_clk_divider("esdhc_a_pred", "esdhc_a_sel", MXC_CCM_CSCDR1, 16, 3);
+	clk[esdhc_a_podf] = imx_clk_divider("esdhc_a_podf", "esdhc_a_pred", MXC_CCM_CSCDR1, 11, 3);
+	clk[esdhc_b_pred] = imx_clk_divider("esdhc_b_pred", "esdhc_b_sel", MXC_CCM_CSCDR1, 22, 3);
+	clk[esdhc_b_podf] = imx_clk_divider("esdhc_b_podf", "esdhc_b_pred", MXC_CCM_CSCDR1, 19, 3);
+	clk[esdhc_c_s] = imx_clk_mux("esdhc_c_sel", MXC_CCM_CSCMR1, 19, 1, esdhc_c_sel, ARRAY_SIZE(esdhc_c_sel));
+	clk[esdhc_d_s] = imx_clk_mux("esdhc_d_sel", MXC_CCM_CSCMR1, 18, 1, esdhc_d_sel, ARRAY_SIZE(esdhc_d_sel));
+
+	clk[emi_sel] = imx_clk_mux("emi_sel", MXC_CCM_CBCDR, 26, 1,
+				emi_slow_sel, ARRAY_SIZE(emi_slow_sel));
+	clk[emi_slow_podf] = imx_clk_divider("emi_slow_podf", "emi_sel", MXC_CCM_CBCDR, 22, 3);
+	clk[nfc_podf] = imx_clk_divider("nfc_podf", "emi_slow_podf", MXC_CCM_CBCDR, 13, 3);
+	clk[ecspi_sel] = imx_clk_mux("ecspi_sel", MXC_CCM_CSCMR1, 4, 2,
+				standard_pll_sel, ARRAY_SIZE(standard_pll_sel));
+	clk[ecspi_pred] = imx_clk_divider("ecspi_pred", "ecspi_sel", MXC_CCM_CSCDR2, 25, 3);
+	clk[ecspi_podf] = imx_clk_divider("ecspi_podf", "ecspi_pred", MXC_CCM_CSCDR2, 19, 6);
+	clk[usboh3_sel] = imx_clk_mux("usboh3_sel", MXC_CCM_CSCMR1, 22, 2,
+				standard_pll_sel, ARRAY_SIZE(standard_pll_sel));
+	clk[usboh3_pred] = imx_clk_divider("usboh3_pred", "usboh3_sel", MXC_CCM_CSCDR1, 8, 3);
+	clk[usboh3_podf] = imx_clk_divider("usboh3_podf", "usboh3_pred", MXC_CCM_CSCDR1, 6, 2);
+	clk[usb_phy_pred] = imx_clk_divider("usb_phy_pred", "pll3_sw", MXC_CCM_CDCDR, 3, 3);
+	clk[usb_phy_podf] = imx_clk_divider("usb_phy_podf", "usb_phy_pred", MXC_CCM_CDCDR, 0, 3);
+	clk[usb_phy_sel] = imx_clk_mux("usb_phy_sel", MXC_CCM_CSCMR1, 26, 1,
+				usb_phy_sel_str, ARRAY_SIZE(usb_phy_sel_str));
+	clk[cpu_podf] = imx_clk_divider("cpu_podf", "pll1_sw", MXC_CCM_CACRR, 0, 3);
+	clk[di_pred] = imx_clk_divider("di_pred", "pll3_sw", MXC_CCM_CDCDR, 6, 3);
+	clk[tve_di] = imx_clk_fixed("tve_di", 65000000); /* FIXME */
+	clk[tve_s] = imx_clk_mux("tve_sel", MXC_CCM_CSCMR1, 7, 1, tve_sel, ARRAY_SIZE(tve_sel));
+	clk[iim_gate] = imx_clk_gate2("iim_gate", "ipg", MXC_CCM_CCGR0, 30);
+	clk[uart1_ipg_gate] = imx_clk_gate2("uart1_ipg_gate", "ipg", MXC_CCM_CCGR1, 6);
+	clk[uart1_per_gate] = imx_clk_gate2("uart1_per_gate", "uart_root", MXC_CCM_CCGR1, 8);
+	clk[uart2_ipg_gate] = imx_clk_gate2("uart2_ipg_gate", "ipg", MXC_CCM_CCGR1, 10);
+	clk[uart2_per_gate] = imx_clk_gate2("uart2_per_gate", "uart_root", MXC_CCM_CCGR1, 12);
+	clk[uart3_ipg_gate] = imx_clk_gate2("uart3_ipg_gate", "ipg", MXC_CCM_CCGR1, 14);
+	clk[uart3_per_gate] = imx_clk_gate2("uart3_per_gate", "uart_root", MXC_CCM_CCGR1, 16);
+	clk[i2c1_gate] = imx_clk_gate2("i2c1_gate", "per_root", MXC_CCM_CCGR1, 18);
+	clk[i2c2_gate] = imx_clk_gate2("i2c2_gate", "per_root", MXC_CCM_CCGR1, 20);
+	clk[gpt_ipg_gate] = imx_clk_gate2("gpt_ipg_gate", "ipg", MXC_CCM_CCGR2, 20);
+	clk[pwm1_ipg_gate] = imx_clk_gate2("pwm1_ipg_gate", "ipg", MXC_CCM_CCGR2, 10);
+	clk[pwm1_hf_gate] = imx_clk_gate2("pwm1_hf_gate", "ipg", MXC_CCM_CCGR2, 12);
+	clk[pwm2_ipg_gate] = imx_clk_gate2("pwm2_ipg_gate", "ipg", MXC_CCM_CCGR2, 14);
+	clk[pwm2_hf_gate] = imx_clk_gate2("pwm2_hf_gate", "ipg", MXC_CCM_CCGR2, 16);
+	clk[gpt_gate] = imx_clk_gate2("gpt_gate", "ipg", MXC_CCM_CCGR2, 18);
+	clk[fec_gate] = imx_clk_gate2("fec_gate", "ipg", MXC_CCM_CCGR2, 24);
+	clk[usboh3_gate] = imx_clk_gate2("usboh3_gate", "ipg", MXC_CCM_CCGR2, 26);
+	clk[usboh3_per_gate] = imx_clk_gate2("usboh3_per_gate", "usboh3_podf", MXC_CCM_CCGR2, 28);
+	clk[esdhc1_ipg_gate] = imx_clk_gate2("esdhc1_ipg_gate", "ipg", MXC_CCM_CCGR3, 0);
+	clk[esdhc2_ipg_gate] = imx_clk_gate2("esdhc2_ipg_gate", "ipg", MXC_CCM_CCGR3, 4);
+	clk[esdhc3_ipg_gate] = imx_clk_gate2("esdhc3_ipg_gate", "ipg", MXC_CCM_CCGR3, 8);
+	clk[esdhc4_ipg_gate] = imx_clk_gate2("esdhc4_ipg_gate", "ipg", MXC_CCM_CCGR3, 12);
+	clk[ssi1_ipg_gate] = imx_clk_gate2("ssi1_ipg_gate", "ipg", MXC_CCM_CCGR3, 16);
+	clk[ssi2_ipg_gate] = imx_clk_gate2("ssi2_ipg_gate", "ipg", MXC_CCM_CCGR3, 20);
+	clk[ssi3_ipg_gate] = imx_clk_gate2("ssi3_ipg_gate", "ipg", MXC_CCM_CCGR3, 24);
+	clk[ecspi1_ipg_gate] = imx_clk_gate2("ecspi1_ipg_gate", "ipg", MXC_CCM_CCGR4, 18);
+	clk[ecspi1_per_gate] = imx_clk_gate2("ecspi1_per_gate", "ecspi_podf", MXC_CCM_CCGR4, 20);
+	clk[ecspi2_ipg_gate] = imx_clk_gate2("ecspi2_ipg_gate", "ipg", MXC_CCM_CCGR4, 22);
+	clk[ecspi2_per_gate] = imx_clk_gate2("ecspi2_per_gate", "ecspi_podf", MXC_CCM_CCGR4, 24);
+	clk[cspi_ipg_gate] = imx_clk_gate2("cspi_ipg_gate", "ipg", MXC_CCM_CCGR4, 26);
+	clk[sdma_gate] = imx_clk_gate2("sdma_gate", "ipg", MXC_CCM_CCGR4, 30);
+	clk[emi_fast_gate] = imx_clk_gate2("emi_fast_gate", "dummy", MXC_CCM_CCGR5, 14);
+	clk[emi_slow_gate] = imx_clk_gate2("emi_slow_gate", "emi_slow_podf", MXC_CCM_CCGR5, 16);
+	clk[ipu_s] = imx_clk_mux("ipu_sel", MXC_CCM_CBCMR, 6, 2, ipu_sel, ARRAY_SIZE(ipu_sel));
+	clk[ipu_gate] = imx_clk_gate2("ipu_gate", "ipu_sel", MXC_CCM_CCGR5, 10);
+	clk[nfc_gate] = imx_clk_gate2("nfc_gate", "nfc_podf", MXC_CCM_CCGR5, 20);
+	clk[ipu_di0_gate] = imx_clk_gate2("ipu_di0_gate", "ipu_di0_sel", MXC_CCM_CCGR6, 10);
+	clk[ipu_di1_gate] = imx_clk_gate2("ipu_di1_gate", "ipu_di1_sel", MXC_CCM_CCGR6, 12);
+	clk[vpu_s] = imx_clk_mux("vpu_sel", MXC_CCM_CBCMR, 14, 2, vpu_sel, ARRAY_SIZE(vpu_sel));
+	clk[vpu_gate] = imx_clk_gate2("vpu_gate", "vpu_sel", MXC_CCM_CCGR5, 6);
+	clk[vpu_reference_gate] = imx_clk_gate2("vpu_reference_gate", "osc", MXC_CCM_CCGR5, 8);
+	clk[uart4_ipg_gate] = imx_clk_gate2("uart4_ipg_gate", "ipg", MXC_CCM_CCGR7, 8);
+	clk[uart4_per_gate] = imx_clk_gate2("uart4_per_gate", "uart_root", MXC_CCM_CCGR7, 10);
+	clk[uart5_ipg_gate] = imx_clk_gate2("uart5_ipg_gate", "ipg", MXC_CCM_CCGR7, 12);
+	clk[uart5_per_gate] = imx_clk_gate2("uart5_per_gate", "uart_root", MXC_CCM_CCGR7, 14);
+	clk[gpc_dvfs] = imx_clk_gate2("gpc_dvfs", "dummy", MXC_CCM_CCGR5, 24);
+
+	clk[ssi_apm] = imx_clk_mux("ssi_apm", MXC_CCM_CSCMR1, 8, 2, ssi_apm_sels, ARRAY_SIZE(ssi_apm_sels));
+	clk[ssi1_root_sel] = imx_clk_mux("ssi1_root_sel", MXC_CCM_CSCMR1, 14, 2, ssi_clk_sels, ARRAY_SIZE(ssi_clk_sels));
+	clk[ssi2_root_sel] = imx_clk_mux("ssi2_root_sel", MXC_CCM_CSCMR1, 12, 2, ssi_clk_sels, ARRAY_SIZE(ssi_clk_sels));
+	clk[ssi3_root_sel] = imx_clk_mux("ssi3_root_sel", MXC_CCM_CSCMR1, 11, 1, ssi3_clk_sels, ARRAY_SIZE(ssi3_clk_sels));
+	clk[ssi_ext1_sel] = imx_clk_mux("ssi_ext1_sel", MXC_CCM_CSCMR1, 28, 2, ssi_clk_sels, ARRAY_SIZE(ssi_clk_sels));
+	clk[ssi_ext2_sel] = imx_clk_mux("ssi_ext2_sel", MXC_CCM_CSCMR1, 30, 2, ssi_clk_sels, ARRAY_SIZE(ssi_clk_sels));
+	clk[ssi_ext1_com_sel] = imx_clk_mux("ssi_ext1_com_sel", MXC_CCM_CSCMR1, 0, 1, ssi_ext1_com_sels, ARRAY_SIZE(ssi_ext1_com_sels));
+	clk[ssi_ext2_com_sel] = imx_clk_mux("ssi_ext2_com_sel", MXC_CCM_CSCMR1, 1, 1, ssi_ext2_com_sels, ARRAY_SIZE(ssi_ext2_com_sels));
+	clk[ssi1_root_pred] = imx_clk_divider("ssi1_root_pred", "ssi1_root_sel", MXC_CCM_CS1CDR, 6, 3);
+	clk[ssi1_root_podf] = imx_clk_divider("ssi1_root_podf", "ssi1_root_pred", MXC_CCM_CS1CDR, 0, 6);
+	clk[ssi2_root_pred] = imx_clk_divider("ssi2_root_pred", "ssi2_root_sel", MXC_CCM_CS2CDR, 6, 3);
+	clk[ssi2_root_podf] = imx_clk_divider("ssi2_root_podf", "ssi2_root_pred", MXC_CCM_CS2CDR, 0, 6);
+	clk[ssi_ext1_pred] = imx_clk_divider("ssi_ext1_pred", "ssi_ext1_sel", MXC_CCM_CS1CDR, 22, 3);
+	clk[ssi_ext1_podf] = imx_clk_divider("ssi_ext1_podf", "ssi_ext1_pred", MXC_CCM_CS1CDR, 16, 6);
+	clk[ssi_ext2_pred] = imx_clk_divider("ssi_ext2_pred", "ssi_ext2_sel", MXC_CCM_CS2CDR, 22, 3);
+	clk[ssi_ext2_podf] = imx_clk_divider("ssi_ext2_podf", "ssi_ext2_pred", MXC_CCM_CS2CDR, 16, 6);
+	clk[ssi1_root_gate] = imx_clk_gate2("ssi1_root_gate", "ssi1_root_podf", MXC_CCM_CCGR3, 18);
+	clk[ssi2_root_gate] = imx_clk_gate2("ssi2_root_gate", "ssi2_root_podf", MXC_CCM_CCGR3, 22);
+	clk[ssi3_root_gate] = imx_clk_gate2("ssi3_root_gate", "ssi3_root_sel", MXC_CCM_CCGR3, 26);
+	clk[ssi_ext1_gate] = imx_clk_gate2("ssi_ext1_gate", "ssi_ext1_com_sel", MXC_CCM_CCGR3, 28);
+	clk[ssi_ext2_gate] = imx_clk_gate2("ssi_ext2_gate", "ssi_ext2_com_sel", MXC_CCM_CCGR3, 30);
+
+	for (i = 0; i < ARRAY_SIZE(clk); i++)
+		if (IS_ERR(clk[i]))
+			pr_err("i.MX5 clk %d: register failed with %ld\n",
+				i, PTR_ERR(clk[i]));
+	
+	clk_register_clkdev(clk[gpt_gate], "per", "imx-gpt.0");
+	clk_register_clkdev(clk[gpt_ipg_gate], "ipg", "imx-gpt.0");
+	clk_register_clkdev(clk[uart1_per_gate], "per", "imx21-uart.0");
+	clk_register_clkdev(clk[uart1_ipg_gate], "ipg", "imx21-uart.0");
+	clk_register_clkdev(clk[uart2_per_gate], "per", "imx21-uart.1");
+	clk_register_clkdev(clk[uart2_ipg_gate], "ipg", "imx21-uart.1");
+	clk_register_clkdev(clk[uart3_per_gate], "per", "imx21-uart.2");
+	clk_register_clkdev(clk[uart3_ipg_gate], "ipg", "imx21-uart.2");
+	clk_register_clkdev(clk[uart4_per_gate], "per", "imx21-uart.3");
+	clk_register_clkdev(clk[uart4_ipg_gate], "ipg", "imx21-uart.3");
+	clk_register_clkdev(clk[uart5_per_gate], "per", "imx21-uart.4");
+	clk_register_clkdev(clk[uart5_ipg_gate], "ipg", "imx21-uart.4");
+	clk_register_clkdev(clk[ecspi1_per_gate], "per", "imx51-ecspi.0");
+	clk_register_clkdev(clk[ecspi1_ipg_gate], "ipg", "imx51-ecspi.0");
+	clk_register_clkdev(clk[ecspi2_per_gate], "per", "imx51-ecspi.1");
+	clk_register_clkdev(clk[ecspi2_ipg_gate], "ipg", "imx51-ecspi.1");
+	clk_register_clkdev(clk[cspi_ipg_gate], NULL, "imx51-cspi.0");
+	clk_register_clkdev(clk[pwm1_ipg_gate], "pwm", "mxc_pwm.0");
+	clk_register_clkdev(clk[pwm2_ipg_gate], "pwm", "mxc_pwm.1");
+	clk_register_clkdev(clk[i2c1_gate], NULL, "imx-i2c.0");
+	clk_register_clkdev(clk[i2c2_gate], NULL, "imx-i2c.1");
+	clk_register_clkdev(clk[usboh3_per_gate], "per", "mxc-ehci.0");
+	clk_register_clkdev(clk[usboh3_gate], "ipg", "mxc-ehci.0");
+	clk_register_clkdev(clk[usboh3_gate], "ahb", "mxc-ehci.0");
+	clk_register_clkdev(clk[usboh3_per_gate], "per", "mxc-ehci.1");
+	clk_register_clkdev(clk[usboh3_gate], "ipg", "mxc-ehci.1");
+	clk_register_clkdev(clk[usboh3_gate], "ahb", "mxc-ehci.1");
+	clk_register_clkdev(clk[usboh3_per_gate], "per", "mxc-ehci.2");
+	clk_register_clkdev(clk[usboh3_gate], "ipg", "mxc-ehci.2");
+	clk_register_clkdev(clk[usboh3_gate], "ahb", "mxc-ehci.2");
+	clk_register_clkdev(clk[usboh3_per_gate], "per", "fsl-usb2-udc");
+	clk_register_clkdev(clk[usboh3_gate], "ipg", "fsl-usb2-udc");
+	clk_register_clkdev(clk[usboh3_gate], "ahb", "fsl-usb2-udc");
+	clk_register_clkdev(clk[nfc_gate], NULL, "mxc_nand");
+	clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "imx-ssi.0");
+	clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "imx-ssi.1");
+	clk_register_clkdev(clk[ssi3_ipg_gate], NULL, "imx-ssi.2");
+	clk_register_clkdev(clk[ssi_ext1_gate], "ssi_ext1", NULL);
+	clk_register_clkdev(clk[ssi_ext2_gate], "ssi_ext2", NULL);
+	clk_register_clkdev(clk[sdma_gate], NULL, "imx35-sdma");
+	clk_register_clkdev(clk[cpu_podf], "cpu", NULL);
+	clk_register_clkdev(clk[iim_gate], "iim", NULL);
+	clk_register_clkdev(clk[dummy], NULL, "imx2-wdt.0");
+	clk_register_clkdev(clk[dummy], NULL, "imx2-wdt.1");
+	clk_register_clkdev(clk[dummy], NULL, "imx-keypad");
+	clk_register_clkdev(clk[tve_gate], NULL, "imx-tve.0");
+	clk_register_clkdev(clk[ipu_di1_gate], "di1", "imx-tve.0");
+
+	/* Set SDHC parents to be PLL2 */
+	clk_set_parent(clk[esdhc_a_sel], clk[pll2_sw]);
+	clk_set_parent(clk[esdhc_b_sel], clk[pll2_sw]);
+
+	/* move usb phy clk to 24MHz */
+	clk_set_parent(clk[usb_phy_sel], clk[osc]);
+
+	clk_prepare_enable(clk[gpc_dvfs]);
+	clk_prepare_enable(clk[ahb_max]); /* esdhc3 */
+	clk_prepare_enable(clk[aips_tz1]);
+	clk_prepare_enable(clk[aips_tz2]); /* fec */
+	clk_prepare_enable(clk[spba]);
+	clk_prepare_enable(clk[emi_fast_gate]); /* fec */
+	clk_prepare_enable(clk[tmax1]);
+	clk_prepare_enable(clk[tmax2]); /* esdhc2, fec */
+	clk_prepare_enable(clk[tmax3]); /* esdhc1, esdhc4 */
+}
+
+int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
+			unsigned long rate_ckih1, unsigned long rate_ckih2)
+{
+	int i;
+
+	clk[pll1_sw] = imx_clk_pllv2("pll1_sw", "osc", MX51_DPLL1_BASE);
+	clk[pll2_sw] = imx_clk_pllv2("pll2_sw", "osc", MX51_DPLL2_BASE);
+	clk[pll3_sw] = imx_clk_pllv2("pll3_sw", "osc", MX51_DPLL3_BASE);
+	clk[ipu_di0_sel] = imx_clk_mux("ipu_di0_sel", MXC_CCM_CSCMR2, 26, 3,
+				mx51_ipu_di0_sel, ARRAY_SIZE(mx51_ipu_di0_sel));
+	clk[ipu_di1_sel] = imx_clk_mux("ipu_di1_sel", MXC_CCM_CSCMR2, 29, 3,
+				mx51_ipu_di1_sel, ARRAY_SIZE(mx51_ipu_di1_sel));
+	clk[tve_ext_sel] = imx_clk_mux("tve_ext_sel", MXC_CCM_CSCMR1, 6, 1,
+				mx51_tve_ext_sel, ARRAY_SIZE(mx51_tve_ext_sel));
+	clk[tve_gate] = imx_clk_gate2("tve_gate", "tve_sel", MXC_CCM_CCGR2, 30);
+	clk[tve_pred] = imx_clk_divider("tve_pred", "pll3_sw", MXC_CCM_CDCDR, 28, 3);
+	clk[esdhc1_per_gate] = imx_clk_gate2("esdhc1_per_gate", "esdhc_a_podf", MXC_CCM_CCGR3, 2);
+	clk[esdhc2_per_gate] = imx_clk_gate2("esdhc2_per_gate", "esdhc_b_podf", MXC_CCM_CCGR3, 6);
+	clk[esdhc3_per_gate] = imx_clk_gate2("esdhc3_per_gate", "esdhc_c_sel", MXC_CCM_CCGR3, 10);
+	clk[esdhc4_per_gate] = imx_clk_gate2("esdhc4_per_gate", "esdhc_d_sel", MXC_CCM_CCGR3, 14);
+	clk[usb_phy_gate] = imx_clk_gate2("usb_phy_gate", "usb_phy_sel", MXC_CCM_CCGR2, 0);
+	clk[hsi2c_gate] = imx_clk_gate2("hsi2c_gate", "ipg", MXC_CCM_CCGR1, 22);
+	clk[mipi_hsc1_gate] = imx_clk_gate2("mipi_hsc1_gate", "ipg", MXC_CCM_CCGR4, 6);
+	clk[mipi_hsc2_gate] = imx_clk_gate2("mipi_hsc2_gate", "ipg", MXC_CCM_CCGR4, 8);
+	clk[mipi_esc_gate] = imx_clk_gate2("mipi_esc_gate", "ipg", MXC_CCM_CCGR4, 10);
+	clk[mipi_hsp_gate] = imx_clk_gate2("mipi_hsp_gate", "ipg", MXC_CCM_CCGR4, 12);
+
+	for (i = 0; i < ARRAY_SIZE(clk); i++)
+		if (IS_ERR(clk[i]))
+			pr_err("i.MX51 clk %d: register failed with %ld\n",
+				i, PTR_ERR(clk[i]));
+
+	mx5_clocks_common_init(rate_ckil, rate_osc, rate_ckih1, rate_ckih2);
+
+	clk_register_clkdev(clk[hsi2c_gate], NULL, "imx-i2c.2");
+	clk_register_clkdev(clk[mx51_mipi], "mipi_hsp", NULL);
+	clk_register_clkdev(clk[vpu_gate], NULL, "imx51-vpu.0");
+	clk_register_clkdev(clk[fec_gate], NULL, "imx27-fec.0");
+	clk_register_clkdev(clk[gpc_dvfs], "gpc_dvfs", NULL);
+	clk_register_clkdev(clk[ipu_gate], "bus", "imx51-ipu");
+	clk_register_clkdev(clk[ipu_di0_gate], "di0", "imx51-ipu");
+	clk_register_clkdev(clk[ipu_di1_gate], "di1", "imx51-ipu");
+	clk_register_clkdev(clk[ipu_gate], "hsp", "imx51-ipu");
+	clk_register_clkdev(clk[usb_phy_gate], "phy", "mxc-ehci.0");
+	clk_register_clkdev(clk[esdhc1_ipg_gate], "ipg", "sdhci-esdhc-imx51.0");
+	clk_register_clkdev(clk[dummy], "ahb", "sdhci-esdhc-imx51.0");
+	clk_register_clkdev(clk[esdhc1_per_gate], "per", "sdhci-esdhc-imx51.0");
+	clk_register_clkdev(clk[esdhc2_ipg_gate], "ipg", "sdhci-esdhc-imx51.1");
+	clk_register_clkdev(clk[dummy], "ahb", "sdhci-esdhc-imx51.1");
+	clk_register_clkdev(clk[esdhc2_per_gate], "per", "sdhci-esdhc-imx51.1");
+	clk_register_clkdev(clk[esdhc3_ipg_gate], "ipg", "sdhci-esdhc-imx51.2");
+	clk_register_clkdev(clk[dummy], "ahb", "sdhci-esdhc-imx51.2");
+	clk_register_clkdev(clk[esdhc3_per_gate], "per", "sdhci-esdhc-imx51.2");
+	clk_register_clkdev(clk[esdhc4_ipg_gate], "ipg", "sdhci-esdhc-imx51.3");
+	clk_register_clkdev(clk[dummy], "ahb", "sdhci-esdhc-imx51.3");
+	clk_register_clkdev(clk[esdhc4_per_gate], "per", "sdhci-esdhc-imx51.3");
+	clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "83fcc000.ssi");
+	clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "70014000.ssi");
+	clk_register_clkdev(clk[ssi3_ipg_gate], NULL, "83fe8000.ssi");
+
+	/* set the usboh3 parent to pll2_sw */
+	clk_set_parent(clk[usboh3_sel], clk[pll2_sw]);
+
+	/* set SDHC root clock to 166.25MHZ*/
+	clk_set_rate(clk[esdhc_a_podf], 166250000);
+	clk_set_rate(clk[esdhc_b_podf], 166250000);
+
+	/* System timer */
+	mxc_timer_init(NULL, MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR),
+		MX51_INT_GPT);
+
+	clk_prepare_enable(clk[iim_gate]);
+	imx_print_silicon_rev("i.MX51", mx51_revision());
+	clk_disable_unprepare(clk[iim_gate]);
+
+	return 0;
+}
+
+int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
+			unsigned long rate_ckih1, unsigned long rate_ckih2)
+{
+	int i;
+	unsigned long r;
+
+	clk[pll1_sw] = imx_clk_pllv2("pll1_sw", "osc", MX53_DPLL1_BASE);
+	clk[pll2_sw] = imx_clk_pllv2("pll2_sw", "osc", MX53_DPLL2_BASE);
+	clk[pll3_sw] = imx_clk_pllv2("pll3_sw", "osc", MX53_DPLL3_BASE);
+	clk[pll4_sw] = imx_clk_pllv2("pll4_sw", "osc", MX53_DPLL4_BASE);
+
+	clk[ldb_di1_sel] = imx_clk_mux("ldb_di1_sel", MXC_CCM_CSCMR2, 9, 1,
+				mx53_ldb_di1_sel, ARRAY_SIZE(mx53_ldb_di1_sel));
+	clk[ldb_di1_div_3_5] = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7);
+	clk[ldb_di1_div] = imx_clk_divider("ldb_di1_div", "ldb_di1_div_3_5", MXC_CCM_CSCMR2, 11, 1);
+	clk[di_pll4_podf] = imx_clk_divider("di_pll4_podf", "pll4_sw", MXC_CCM_CDCDR, 16, 3);
+	clk[ldb_di0_sel] = imx_clk_mux("ldb_di0_sel", MXC_CCM_CSCMR2, 8, 1,
+				mx53_ldb_di0_sel, ARRAY_SIZE(mx53_ldb_di0_sel));
+	clk[ldb_di0_div_3_5] = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7);
+	clk[ldb_di0_div] = imx_clk_divider("ldb_di0_div", "ldb_di0_div_3_5", MXC_CCM_CSCMR2, 10, 1);
+	clk[ldb_di0_gate] = imx_clk_gate2("ldb_di0_gate", "ldb_di0_div", MXC_CCM_CCGR6, 28);
+	clk[ldb_di1_gate] = imx_clk_gate2("ldb_di1_gate", "ldb_di1_div", MXC_CCM_CCGR6, 30);
+	clk[ipu_di0_sel] = imx_clk_mux("ipu_di0_sel", MXC_CCM_CSCMR2, 26, 3,
+				mx53_ipu_di0_sel, ARRAY_SIZE(mx53_ipu_di0_sel));
+	clk[ipu_di1_sel] = imx_clk_mux("ipu_di1_sel", MXC_CCM_CSCMR2, 29, 3,
+				mx53_ipu_di1_sel, ARRAY_SIZE(mx53_ipu_di1_sel));
+	clk[tve_ext_sel] = imx_clk_mux("tve_ext_sel", MXC_CCM_CSCMR1, 6, 1,
+				mx53_tve_ext_sel, ARRAY_SIZE(mx53_tve_ext_sel));
+	clk[tve_gate] = imx_clk_gate2("tve_gate", "tve_pred", MXC_CCM_CCGR2, 30);
+	clk[tve_pred] = imx_clk_divider("tve_pred", "tve_ext_sel", MXC_CCM_CDCDR, 28, 3);
+	clk[esdhc1_per_gate] = imx_clk_gate2("esdhc1_per_gate", "esdhc_a_podf", MXC_CCM_CCGR3, 2);
+	clk[esdhc2_per_gate] = imx_clk_gate2("esdhc2_per_gate", "esdhc_c_sel", MXC_CCM_CCGR3, 6);
+	clk[esdhc3_per_gate] = imx_clk_gate2("esdhc3_per_gate", "esdhc_b_podf", MXC_CCM_CCGR3, 10);
+	clk[esdhc4_per_gate] = imx_clk_gate2("esdhc4_per_gate", "esdhc_d_sel", MXC_CCM_CCGR3, 14);
+	clk[usb_phy1_gate] = imx_clk_gate2("usb_phy1_gate", "usb_phy_sel", MXC_CCM_CCGR4, 10);
+	clk[usb_phy2_gate] = imx_clk_gate2("usb_phy2_gate", "usb_phy_sel", MXC_CCM_CCGR4, 12);
+	clk[can2_serial_gate] = imx_clk_gate2("can2_serial_gate", "ipg", MXC_CCM_CCGR4, 6);
+	clk[can2_ipg_gate] = imx_clk_gate2("can2_ipg_gate", "ipg", MXC_CCM_CCGR4, 8);
+	clk[i2c3_gate] = imx_clk_gate2("i2c3_gate", "per_root", MXC_CCM_CCGR1, 22);
+
+	for (i = 0; i < ARRAY_SIZE(clk); i++)
+		if (IS_ERR(clk[i]))
+			pr_err("i.MX53 clk %d: register failed with %ld\n",
+				i, PTR_ERR(clk[i]));
+
+	mx5_clocks_common_init(rate_ckil, rate_osc, rate_ckih1, rate_ckih2);
+
+	clk_register_clkdev(clk[vpu_gate], NULL, "imx53-vpu.0");
+	clk_register_clkdev(clk[i2c3_gate], NULL, "imx-i2c.2");
+	clk_register_clkdev(clk[fec_gate], NULL, "imx25-fec.0");
+	clk_register_clkdev(clk[ipu_gate], "bus", "imx53-ipu");
+	clk_register_clkdev(clk[ipu_di0_gate], "di0", "imx53-ipu");
+	clk_register_clkdev(clk[ipu_di1_gate], "di1", "imx53-ipu");
+	clk_register_clkdev(clk[ipu_gate], "hsp", "imx53-ipu");
+	clk_register_clkdev(clk[usb_phy1_gate], "usb_phy1", "mxc-ehci.0");
+	clk_register_clkdev(clk[esdhc1_ipg_gate], "ipg", "sdhci-esdhc-imx53.0");
+	clk_register_clkdev(clk[dummy], "ahb", "sdhci-esdhc-imx53.0");
+	clk_register_clkdev(clk[esdhc1_per_gate], "per", "sdhci-esdhc-imx53.0");
+	clk_register_clkdev(clk[esdhc2_ipg_gate], "ipg", "sdhci-esdhc-imx53.1");
+	clk_register_clkdev(clk[dummy], "ahb", "sdhci-esdhc-imx53.1");
+	clk_register_clkdev(clk[esdhc2_per_gate], "per", "sdhci-esdhc-imx53.1");
+	clk_register_clkdev(clk[esdhc3_ipg_gate], "ipg", "sdhci-esdhc-imx53.2");
+	clk_register_clkdev(clk[dummy], "ahb", "sdhci-esdhc-imx53.2");
+	clk_register_clkdev(clk[esdhc3_per_gate], "per", "sdhci-esdhc-imx53.2");
+	clk_register_clkdev(clk[esdhc4_ipg_gate], "ipg", "sdhci-esdhc-imx53.3");
+	clk_register_clkdev(clk[dummy], "ahb", "sdhci-esdhc-imx53.3");
+	clk_register_clkdev(clk[esdhc4_per_gate], "per", "sdhci-esdhc-imx53.3");
+	clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "63fcc000.ssi");
+	clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "50014000.ssi");
+	clk_register_clkdev(clk[ssi3_ipg_gate], NULL, "63fd0000.ssi");
+
+	/* set SDHC root clock to 200MHZ*/
+	clk_set_rate(clk[esdhc_a_podf], 200000000);
+	clk_set_rate(clk[esdhc_b_podf], 200000000);
+
+	/* System timer */
+	mxc_timer_init(NULL, MX53_IO_ADDRESS(MX53_GPT1_BASE_ADDR),
+		MX53_INT_GPT);
+
+	clk_prepare_enable(clk[iim_gate]);
+	imx_print_silicon_rev("i.MX53", mx53_revision());
+	clk_disable_unprepare(clk[iim_gate]);
+
+	r = clk_round_rate(clk[usboh3_per_gate], 54000000);
+	clk_set_rate(clk[usboh3_per_gate], r);
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static void __init clk_get_freq_dt(unsigned long *ckil, unsigned long *osc,
+				   unsigned long *ckih1, unsigned long *ckih2)
+{
+	struct device_node *np;
+
+	/* retrieve the freqency of fixed clocks from device tree */
+	for_each_compatible_node(np, NULL, "fixed-clock") {
+		u32 rate;
+		if (of_property_read_u32(np, "clock-frequency", &rate))
+			continue;
+
+		if (of_device_is_compatible(np, "fsl,imx-ckil"))
+			*ckil = rate;
+		else if (of_device_is_compatible(np, "fsl,imx-osc"))
+			*osc = rate;
+		else if (of_device_is_compatible(np, "fsl,imx-ckih1"))
+			*ckih1 = rate;
+		else if (of_device_is_compatible(np, "fsl,imx-ckih2"))
+			*ckih2 = rate;
+	}
+}
+
+int __init mx51_clocks_init_dt(void)
+{
+	unsigned long ckil, osc, ckih1, ckih2;
+
+	clk_get_freq_dt(&ckil, &osc, &ckih1, &ckih2);
+	return mx51_clocks_init(ckil, osc, ckih1, ckih2);
+}
+
+int __init mx53_clocks_init_dt(void)
+{
+	unsigned long ckil, osc, ckih1, ckih2;
+
+	clk_get_freq_dt(&ckil, &osc, &ckih1, &ckih2);
+	return mx53_clocks_init(ckil, osc, ckih1, ckih2);
+}
+#endif
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
new file mode 100644
index 000000000000..cab02d0a15d6
--- /dev/null
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -0,0 +1,444 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <mach/common.h>
+#include "clk.h"
+
+#define CCGR0				0x68
+#define CCGR1				0x6c
+#define CCGR2				0x70
+#define CCGR3				0x74
+#define CCGR4				0x78
+#define CCGR5				0x7c
+#define CCGR6				0x80
+#define CCGR7				0x84
+
+#define CLPCR				0x54
+#define BP_CLPCR_LPM			0
+#define BM_CLPCR_LPM			(0x3 << 0)
+#define BM_CLPCR_BYPASS_PMIC_READY	(0x1 << 2)
+#define BM_CLPCR_ARM_CLK_DIS_ON_LPM	(0x1 << 5)
+#define BM_CLPCR_SBYOS			(0x1 << 6)
+#define BM_CLPCR_DIS_REF_OSC		(0x1 << 7)
+#define BM_CLPCR_VSTBY			(0x1 << 8)
+#define BP_CLPCR_STBY_COUNT		9
+#define BM_CLPCR_STBY_COUNT		(0x3 << 9)
+#define BM_CLPCR_COSC_PWRDOWN		(0x1 << 11)
+#define BM_CLPCR_WB_PER_AT_LPM		(0x1 << 16)
+#define BM_CLPCR_WB_CORE_AT_LPM		(0x1 << 17)
+#define BM_CLPCR_BYP_MMDC_CH0_LPM_HS	(0x1 << 19)
+#define BM_CLPCR_BYP_MMDC_CH1_LPM_HS	(0x1 << 21)
+#define BM_CLPCR_MASK_CORE0_WFI		(0x1 << 22)
+#define BM_CLPCR_MASK_CORE1_WFI		(0x1 << 23)
+#define BM_CLPCR_MASK_CORE2_WFI		(0x1 << 24)
+#define BM_CLPCR_MASK_CORE3_WFI		(0x1 << 25)
+#define BM_CLPCR_MASK_SCU_IDLE		(0x1 << 26)
+#define BM_CLPCR_MASK_L2CC_IDLE		(0x1 << 27)
+
+static void __iomem *ccm_base;
+
+void __init imx6q_clock_map_io(void) { }
+
+int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
+{
+	u32 val = readl_relaxed(ccm_base + CLPCR);
+
+	val &= ~BM_CLPCR_LPM;
+	switch (mode) {
+	case WAIT_CLOCKED:
+		break;
+	case WAIT_UNCLOCKED:
+		val |= 0x1 << BP_CLPCR_LPM;
+		break;
+	case STOP_POWER_ON:
+		val |= 0x2 << BP_CLPCR_LPM;
+		break;
+	case WAIT_UNCLOCKED_POWER_OFF:
+		val |= 0x1 << BP_CLPCR_LPM;
+		val &= ~BM_CLPCR_VSTBY;
+		val &= ~BM_CLPCR_SBYOS;
+		break;
+	case STOP_POWER_OFF:
+		val |= 0x2 << BP_CLPCR_LPM;
+		val |= 0x3 << BP_CLPCR_STBY_COUNT;
+		val |= BM_CLPCR_VSTBY;
+		val |= BM_CLPCR_SBYOS;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	writel_relaxed(val, ccm_base + CLPCR);
+
+	return 0;
+}
+
+static const char *step_sels[]	= { "osc", "pll2_pfd2_396m", };
+static const char *pll1_sw_sels[]	= { "pll1_sys", "step", };
+static const char *periph_pre_sels[]	= { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll2_198m", };
+static const char *periph_clk2_sels[]	= { "pll3_usb_otg", "osc", };
+static const char *periph_sels[]	= { "periph_pre", "periph_clk2", };
+static const char *periph2_sels[]	= { "periph2_pre", "periph2_clk2", };
+static const char *axi_sels[]		= { "periph", "pll2_pfd2_396m", "pll3_pfd1_540m", };
+static const char *audio_sels[]	= { "pll4_audio", "pll3_pfd2_508m", "pll3_pfd3_454m", "pll3_usb_otg", };
+static const char *gpu_axi_sels[]	= { "axi", "ahb", };
+static const char *gpu2d_core_sels[]	= { "axi", "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", };
+static const char *gpu3d_core_sels[]	= { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd2_396m", };
+static const char *gpu3d_shader_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd9_720m", };
+static const char *ipu_sels[]		= { "mmdc_ch0_axi", "pll2_pfd2_396m", "pll3_120m", "pll3_pfd1_540m", };
+static const char *ldb_di_sels[]	= { "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd1_540m", };
+static const char *ipu_di_pre_sels[]	= { "mmdc_ch0_axi", "pll3_usb_otg", "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd1_540m", };
+static const char *ipu1_di0_sels[]	= { "ipu1_di0_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
+static const char *ipu1_di1_sels[]	= { "ipu1_di1_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
+static const char *ipu2_di0_sels[]	= { "ipu2_di0_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
+static const char *ipu2_di1_sels[]	= { "ipu2_di1_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
+static const char *hsi_tx_sels[]	= { "pll3_120m", "pll2_pfd2_396m", };
+static const char *pcie_axi_sels[]	= { "axi", "ahb", };
+static const char *ssi_sels[]		= { "pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_audio", };
+static const char *usdhc_sels[]	= { "pll2_pfd2_396m", "pll2_pfd0_352m", };
+static const char *enfc_sels[]	= { "pll2_pfd0_352m", "pll2_bus", "pll3_usb_otg", "pll2_pfd2_396m", };
+static const char *emi_sels[]		= { "axi", "pll3_usb_otg", "pll2_pfd2_396m", "pll2_pfd0_352m", };
+static const char *vdo_axi_sels[]	= { "axi", "ahb", };
+static const char *vpu_axi_sels[]	= { "axi", "pll2_pfd2_396m", "pll2_pfd0_352m", };
+static const char *cko1_sels[]	= { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_video",
+				    "dummy", "axi", "enfc", "ipu1_di0", "ipu1_di1", "ipu2_di0",
+				    "ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_audio", };
+
+static const char * const clks_init_on[] __initconst = {
+	"mmdc_ch0_axi", "mmdc_ch1_axi", "usboh3",
+};
+
+enum mx6q_clks {
+	dummy, ckil, ckih, osc, pll2_pfd0_352m, pll2_pfd1_594m, pll2_pfd2_396m,
+	pll3_pfd0_720m, pll3_pfd1_540m, pll3_pfd2_508m, pll3_pfd3_454m,
+	pll2_198m, pll3_120m, pll3_80m, pll3_60m, twd, step, pll1_sw,
+	periph_pre, periph2_pre, periph_clk2_sel, periph2_clk2_sel, axi_sel,
+	esai_sel, asrc_sel, spdif_sel, gpu2d_axi, gpu3d_axi, gpu2d_core_sel,
+	gpu3d_core_sel, gpu3d_shader_sel, ipu1_sel, ipu2_sel, ldb_di0_sel,
+	ldb_di1_sel, ipu1_di0_pre_sel, ipu1_di1_pre_sel, ipu2_di0_pre_sel,
+	ipu2_di1_pre_sel, ipu1_di0_sel, ipu1_di1_sel, ipu2_di0_sel,
+	ipu2_di1_sel, hsi_tx_sel, pcie_axi_sel, ssi1_sel, ssi2_sel, ssi3_sel,
+	usdhc1_sel, usdhc2_sel, usdhc3_sel, usdhc4_sel, enfc_sel, emi_sel,
+	emi_slow_sel, vdo_axi_sel, vpu_axi_sel, cko1_sel, periph, periph2,
+	periph_clk2, periph2_clk2, ipg, ipg_per, esai_pred, esai_podf,
+	asrc_pred, asrc_podf, spdif_pred, spdif_podf, can_root, ecspi_root,
+	gpu2d_core_podf, gpu3d_core_podf, gpu3d_shader, ipu1_podf, ipu2_podf,
+	ldb_di0_podf, ldb_di1_podf, ipu1_di0_pre, ipu1_di1_pre, ipu2_di0_pre,
+	ipu2_di1_pre, hsi_tx_podf, ssi1_pred, ssi1_podf, ssi2_pred, ssi2_podf,
+	ssi3_pred, ssi3_podf, uart_serial_podf, usdhc1_podf, usdhc2_podf,
+	usdhc3_podf, usdhc4_podf, enfc_pred, enfc_podf, emi_podf,
+	emi_slow_podf, vpu_axi_podf, cko1_podf, axi, mmdc_ch0_axi_podf,
+	mmdc_ch1_axi_podf, arm, ahb, apbh_dma, asrc, can1_ipg, can1_serial,
+	can2_ipg, can2_serial, ecspi1, ecspi2, ecspi3, ecspi4, ecspi5, enet,
+	esai, gpt_ipg, gpt_ipg_per, gpu2d_core, gpu3d_core, hdmi_iahb,
+	hdmi_isfr, i2c1, i2c2, i2c3, iim, enfc, ipu1, ipu1_di0, ipu1_di1, ipu2,
+	ipu2_di0, ldb_di0, ldb_di1, ipu2_di1, hsi_tx, mlb, mmdc_ch0_axi,
+	mmdc_ch1_axi, ocram, openvg_axi, pcie_axi, pwm1, pwm2, pwm3, pwm4,
+	gpmi_bch_apb, gpmi_bch, gpmi_io, gpmi_apb, sata, sdma, spba, ssi1,
+	ssi2, ssi3, uart_ipg, uart_serial, usboh3, usdhc1, usdhc2, usdhc3,
+	usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg,
+	pll4_audio, pll5_video, pll6_mlb, pll7_usb_host, pll8_enet, ssi1_ipg,
+	ssi2_ipg, ssi3_ipg, clk_max
+};
+
+static struct clk *clk[clk_max];
+
+int __init mx6q_clocks_init(void)
+{
+	struct device_node *np;
+	void __iomem *base;
+	struct clk *c;
+	int i, irq;
+
+	clk[dummy] = imx_clk_fixed("dummy", 0);
+
+	/* retrieve the freqency of fixed clocks from device tree */
+	for_each_compatible_node(np, NULL, "fixed-clock") {
+		u32 rate;
+		if (of_property_read_u32(np, "clock-frequency", &rate))
+			continue;
+
+		if (of_device_is_compatible(np, "fsl,imx-ckil"))
+			clk[ckil] = imx_clk_fixed("ckil", rate);
+		else if (of_device_is_compatible(np, "fsl,imx-ckih1"))
+			clk[ckih] = imx_clk_fixed("ckih", rate);
+		else if (of_device_is_compatible(np, "fsl,imx-osc"))
+			clk[osc] = imx_clk_fixed("osc", rate);
+	}
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop");
+	base = of_iomap(np, 0);
+	WARN_ON(!base);
+
+	/*                   type                               name         parent_name  base     gate_mask div_mask */
+	clk[pll1_sys]      = imx_clk_pllv3(IMX_PLLV3_SYS,	"pll1_sys",	"osc", base,        0x2000,   0x7f);
+	clk[pll2_bus]      = imx_clk_pllv3(IMX_PLLV3_GENERIC,	"pll2_bus",	"osc", base + 0x30, 0x2000,   0x1);
+	clk[pll3_usb_otg]  = imx_clk_pllv3(IMX_PLLV3_USB,	"pll3_usb_otg",	"osc", base + 0x10, 0x2000,   0x3);
+	clk[pll4_audio]    = imx_clk_pllv3(IMX_PLLV3_AV,	"pll4_audio",	"osc", base + 0x70, 0x2000,   0x7f);
+	clk[pll5_video]    = imx_clk_pllv3(IMX_PLLV3_AV,	"pll5_video",	"osc", base + 0xa0, 0x2000,   0x7f);
+	clk[pll6_mlb]      = imx_clk_pllv3(IMX_PLLV3_MLB,	"pll6_mlb",	"osc", base + 0xd0, 0x2000,   0x0);
+	clk[pll7_usb_host] = imx_clk_pllv3(IMX_PLLV3_USB,	"pll7_usb_host","osc", base + 0x20, 0x2000,   0x3);
+	clk[pll8_enet]     = imx_clk_pllv3(IMX_PLLV3_ENET,	"pll8_enet",	"osc", base + 0xe0, 0x182000, 0x3);
+
+	/*                                name              parent_name        reg       idx */
+	clk[pll2_pfd0_352m] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus",     base + 0x100, 0);
+	clk[pll2_pfd1_594m] = imx_clk_pfd("pll2_pfd1_594m", "pll2_bus",     base + 0x100, 1);
+	clk[pll2_pfd2_396m] = imx_clk_pfd("pll2_pfd2_396m", "pll2_bus",     base + 0x100, 2);
+	clk[pll3_pfd0_720m] = imx_clk_pfd("pll3_pfd0_720m", "pll3_usb_otg", base + 0xf0,  0);
+	clk[pll3_pfd1_540m] = imx_clk_pfd("pll3_pfd1_540m", "pll3_usb_otg", base + 0xf0,  1);
+	clk[pll3_pfd2_508m] = imx_clk_pfd("pll3_pfd2_508m", "pll3_usb_otg", base + 0xf0,  2);
+	clk[pll3_pfd3_454m] = imx_clk_pfd("pll3_pfd3_454m", "pll3_usb_otg", base + 0xf0,  3);
+
+	/*                                    name         parent_name     mult div */
+	clk[pll2_198m] = imx_clk_fixed_factor("pll2_198m", "pll2_pfd2_396m", 1, 2);
+	clk[pll3_120m] = imx_clk_fixed_factor("pll3_120m", "pll3_usb_otg",   1, 4);
+	clk[pll3_80m]  = imx_clk_fixed_factor("pll3_80m",  "pll3_usb_otg",   1, 6);
+	clk[pll3_60m]  = imx_clk_fixed_factor("pll3_60m",  "pll3_usb_otg",   1, 8);
+	clk[twd]       = imx_clk_fixed_factor("twd",       "arm",            1, 2);
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-ccm");
+	base = of_iomap(np, 0);
+	WARN_ON(!base);
+	ccm_base = base;
+
+	/*                                  name                reg       shift width parent_names     num_parents */
+	clk[step]             = imx_clk_mux("step",	        base + 0xc,  8,  1, step_sels,	       ARRAY_SIZE(step_sels));
+	clk[pll1_sw]          = imx_clk_mux("pll1_sw",	        base + 0xc,  2,  1, pll1_sw_sels,      ARRAY_SIZE(pll1_sw_sels));
+	clk[periph_pre]       = imx_clk_mux("periph_pre",       base + 0x18, 18, 2, periph_pre_sels,   ARRAY_SIZE(periph_pre_sels));
+	clk[periph2_pre]      = imx_clk_mux("periph2_pre",      base + 0x18, 21, 2, periph_pre_sels,   ARRAY_SIZE(periph_pre_sels));
+	clk[periph_clk2_sel]  = imx_clk_mux("periph_clk2_sel",  base + 0x18, 12, 1, periph_clk2_sels,  ARRAY_SIZE(periph_clk2_sels));
+	clk[periph2_clk2_sel] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph_clk2_sels,  ARRAY_SIZE(periph_clk2_sels));
+	clk[axi_sel]          = imx_clk_mux("axi_sel",          base + 0x14, 6,  2, axi_sels,          ARRAY_SIZE(axi_sels));
+	clk[esai_sel]         = imx_clk_mux("esai_sel",         base + 0x20, 19, 2, audio_sels,        ARRAY_SIZE(audio_sels));
+	clk[asrc_sel]         = imx_clk_mux("asrc_sel",         base + 0x30, 7,  2, audio_sels,        ARRAY_SIZE(audio_sels));
+	clk[spdif_sel]        = imx_clk_mux("spdif_sel",        base + 0x30, 20, 2, audio_sels,        ARRAY_SIZE(audio_sels));
+	clk[gpu2d_axi]        = imx_clk_mux("gpu2d_axi",        base + 0x18, 0,  1, gpu_axi_sels,      ARRAY_SIZE(gpu_axi_sels));
+	clk[gpu3d_axi]        = imx_clk_mux("gpu3d_axi",        base + 0x18, 1,  1, gpu_axi_sels,      ARRAY_SIZE(gpu_axi_sels));
+	clk[gpu2d_core_sel]   = imx_clk_mux("gpu2d_core_sel",   base + 0x18, 16, 2, gpu2d_core_sels,   ARRAY_SIZE(gpu2d_core_sels));
+	clk[gpu3d_core_sel]   = imx_clk_mux("gpu3d_core_sel",   base + 0x18, 4,  2, gpu3d_core_sels,   ARRAY_SIZE(gpu3d_core_sels));
+	clk[gpu3d_shader_sel] = imx_clk_mux("gpu3d_shader_sel", base + 0x18, 8,  2, gpu3d_shader_sels, ARRAY_SIZE(gpu3d_shader_sels));
+	clk[ipu1_sel]         = imx_clk_mux("ipu1_sel",         base + 0x3c, 9,  2, ipu_sels,          ARRAY_SIZE(ipu_sels));
+	clk[ipu2_sel]         = imx_clk_mux("ipu2_sel",         base + 0x3c, 14, 2, ipu_sels,          ARRAY_SIZE(ipu_sels));
+	clk[ldb_di0_sel]      = imx_clk_mux("ldb_di0_sel",      base + 0x2c, 9,  3, ldb_di_sels,       ARRAY_SIZE(ldb_di_sels));
+	clk[ldb_di1_sel]      = imx_clk_mux("ldb_di1_sel",      base + 0x2c, 12, 3, ldb_di_sels,       ARRAY_SIZE(ldb_di_sels));
+	clk[ipu1_di0_pre_sel] = imx_clk_mux("ipu1_di0_pre_sel", base + 0x34, 6,  3, ipu_di_pre_sels,   ARRAY_SIZE(ipu_di_pre_sels));
+	clk[ipu1_di1_pre_sel] = imx_clk_mux("ipu1_di1_pre_sel", base + 0x34, 15, 3, ipu_di_pre_sels,   ARRAY_SIZE(ipu_di_pre_sels));
+	clk[ipu2_di0_pre_sel] = imx_clk_mux("ipu2_di0_pre_sel", base + 0x38, 6,  3, ipu_di_pre_sels,   ARRAY_SIZE(ipu_di_pre_sels));
+	clk[ipu2_di1_pre_sel] = imx_clk_mux("ipu2_di1_pre_sel", base + 0x38, 15, 3, ipu_di_pre_sels,   ARRAY_SIZE(ipu_di_pre_sels));
+	clk[ipu1_di0_sel]     = imx_clk_mux("ipu1_di0_sel",     base + 0x34, 0,  3, ipu1_di0_sels,     ARRAY_SIZE(ipu1_di0_sels));
+	clk[ipu1_di1_sel]     = imx_clk_mux("ipu1_di1_sel",     base + 0x34, 9,  3, ipu1_di1_sels,     ARRAY_SIZE(ipu1_di1_sels));
+	clk[ipu2_di0_sel]     = imx_clk_mux("ipu2_di0_sel",     base + 0x38, 0,  3, ipu2_di0_sels,     ARRAY_SIZE(ipu2_di0_sels));
+	clk[ipu2_di1_sel]     = imx_clk_mux("ipu2_di1_sel",     base + 0x38, 9,  3, ipu2_di1_sels,     ARRAY_SIZE(ipu2_di1_sels));
+	clk[hsi_tx_sel]       = imx_clk_mux("hsi_tx_sel",       base + 0x30, 28, 1, hsi_tx_sels,       ARRAY_SIZE(hsi_tx_sels));
+	clk[pcie_axi_sel]     = imx_clk_mux("pcie_axi_sel",     base + 0x18, 10, 1, pcie_axi_sels,     ARRAY_SIZE(pcie_axi_sels));
+	clk[ssi1_sel]         = imx_clk_mux("ssi1_sel",         base + 0x1c, 10, 2, ssi_sels,          ARRAY_SIZE(ssi_sels));
+	clk[ssi2_sel]         = imx_clk_mux("ssi2_sel",         base + 0x1c, 12, 2, ssi_sels,          ARRAY_SIZE(ssi_sels));
+	clk[ssi3_sel]         = imx_clk_mux("ssi3_sel",         base + 0x1c, 14, 2, ssi_sels,          ARRAY_SIZE(ssi_sels));
+	clk[usdhc1_sel]       = imx_clk_mux("usdhc1_sel",       base + 0x1c, 16, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels));
+	clk[usdhc2_sel]       = imx_clk_mux("usdhc2_sel",       base + 0x1c, 17, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels));
+	clk[usdhc3_sel]       = imx_clk_mux("usdhc3_sel",       base + 0x1c, 18, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels));
+	clk[usdhc4_sel]       = imx_clk_mux("usdhc4_sel",       base + 0x1c, 19, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels));
+	clk[enfc_sel]         = imx_clk_mux("enfc_sel",         base + 0x2c, 16, 2, enfc_sels,         ARRAY_SIZE(enfc_sels));
+	clk[emi_sel]          = imx_clk_mux("emi_sel",          base + 0x1c, 27, 2, emi_sels,          ARRAY_SIZE(emi_sels));
+	clk[emi_slow_sel]     = imx_clk_mux("emi_slow_sel",     base + 0x1c, 29, 2, emi_sels,          ARRAY_SIZE(emi_sels));
+	clk[vdo_axi_sel]      = imx_clk_mux("vdo_axi_sel",      base + 0x18, 11, 1, vdo_axi_sels,      ARRAY_SIZE(vdo_axi_sels));
+	clk[vpu_axi_sel]      = imx_clk_mux("vpu_axi_sel",      base + 0x18, 14, 2, vpu_axi_sels,      ARRAY_SIZE(vpu_axi_sels));
+	clk[cko1_sel]         = imx_clk_mux("cko1_sel",         base + 0x60, 0,  4, cko1_sels,         ARRAY_SIZE(cko1_sels));
+
+	/*                              name         reg      shift width busy: reg, shift parent_names  num_parents */
+	clk[periph]  = imx_clk_busy_mux("periph",  base + 0x14, 25,  1,   base + 0x48, 5,  periph_sels,  ARRAY_SIZE(periph_sels));
+	clk[periph2] = imx_clk_busy_mux("periph2", base + 0x14, 26,  1,   base + 0x48, 3,  periph2_sels, ARRAY_SIZE(periph2_sels));
+
+	/*                                      name                parent_name          reg       shift width */
+	clk[periph_clk2]      = imx_clk_divider("periph_clk2",      "periph_clk2_sel",   base + 0x14, 27, 3);
+	clk[periph2_clk2]     = imx_clk_divider("periph2_clk2",     "periph2_clk2_sel",  base + 0x14, 0,  3);
+	clk[ipg]              = imx_clk_divider("ipg",              "ahb",               base + 0x14, 8,  2);
+	clk[ipg_per]          = imx_clk_divider("ipg_per",          "ipg",               base + 0x1c, 0,  6);
+	clk[esai_pred]        = imx_clk_divider("esai_pred",        "esai_sel",          base + 0x28, 9,  3);
+	clk[esai_podf]        = imx_clk_divider("esai_podf",        "esai_pred",         base + 0x28, 25, 3);
+	clk[asrc_pred]        = imx_clk_divider("asrc_pred",        "asrc_sel",          base + 0x30, 12, 3);
+	clk[asrc_podf]        = imx_clk_divider("asrc_podf",        "asrc_pred",         base + 0x30, 9,  3);
+	clk[spdif_pred]       = imx_clk_divider("spdif_pred",       "spdif_sel",         base + 0x30, 25, 3);
+	clk[spdif_podf]       = imx_clk_divider("spdif_podf",       "spdif_pred",        base + 0x30, 22, 3);
+	clk[can_root]         = imx_clk_divider("can_root",         "pll3_usb_otg",      base + 0x20, 2,  6);
+	clk[ecspi_root]       = imx_clk_divider("ecspi_root",       "pll3_60m",          base + 0x38, 19, 6);
+	clk[gpu2d_core_podf]  = imx_clk_divider("gpu2d_core_podf",  "gpu2d_core_sel",    base + 0x18, 23, 3);
+	clk[gpu3d_core_podf]  = imx_clk_divider("gpu3d_core_podf",  "gpu3d_core_sel",    base + 0x18, 26, 3);
+	clk[gpu3d_shader]     = imx_clk_divider("gpu3d_shader",     "gpu3d_shader_sel",  base + 0x18, 29, 3);
+	clk[ipu1_podf]        = imx_clk_divider("ipu1_podf",        "ipu1_sel",          base + 0x3c, 11, 3);
+	clk[ipu2_podf]        = imx_clk_divider("ipu2_podf",        "ipu2_sel",          base + 0x3c, 16, 3);
+	clk[ldb_di0_podf]     = imx_clk_divider("ldb_di0_podf",     "ldb_di0_sel",       base + 0x20, 10, 1);
+	clk[ldb_di1_podf]     = imx_clk_divider("ldb_di1_podf",     "ldb_di1_sel",       base + 0x20, 11, 1);
+	clk[ipu1_di0_pre]     = imx_clk_divider("ipu1_di0_pre",     "ipu1_di0_pre_sel",  base + 0x34, 3,  3);
+	clk[ipu1_di1_pre]     = imx_clk_divider("ipu1_di1_pre",     "ipu1_di1_pre_sel",  base + 0x34, 12, 3);
+	clk[ipu2_di0_pre]     = imx_clk_divider("ipu2_di0_pre",     "ipu2_di0_pre_sel",  base + 0x38, 3,  3);
+	clk[ipu2_di1_pre]     = imx_clk_divider("ipu2_di1_pre",     "ipu2_di1_pre_sel",  base + 0x38, 12, 3);
+	clk[hsi_tx_podf]      = imx_clk_divider("hsi_tx_podf",      "hsi_tx_sel",        base + 0x30, 29, 3);
+	clk[ssi1_pred]        = imx_clk_divider("ssi1_pred",        "ssi1_sel",          base + 0x28, 6,  3);
+	clk[ssi1_podf]        = imx_clk_divider("ssi1_podf",        "ssi1_pred",         base + 0x28, 0,  6);
+	clk[ssi2_pred]        = imx_clk_divider("ssi2_pred",        "ssi2_sel",          base + 0x2c, 6,  3);
+	clk[ssi2_podf]        = imx_clk_divider("ssi2_podf",        "ssi2_pred",         base + 0x2c, 0,  6);
+	clk[ssi3_pred]        = imx_clk_divider("ssi3_pred",        "ssi3_sel",          base + 0x28, 22, 3);
+	clk[ssi3_podf]        = imx_clk_divider("ssi3_podf",        "ssi3_pred",         base + 0x28, 16, 6);
+	clk[uart_serial_podf] = imx_clk_divider("uart_serial_podf", "pll3_80m",          base + 0x24, 0,  6);
+	clk[usdhc1_podf]      = imx_clk_divider("usdhc1_podf",      "usdhc1_sel",        base + 0x24, 11, 3);
+	clk[usdhc2_podf]      = imx_clk_divider("usdhc2_podf",      "usdhc2_sel",        base + 0x24, 16, 3);
+	clk[usdhc3_podf]      = imx_clk_divider("usdhc3_podf",      "usdhc3_sel",        base + 0x24, 19, 3);
+	clk[usdhc4_podf]      = imx_clk_divider("usdhc4_podf",      "usdhc4_sel",        base + 0x24, 22, 3);
+	clk[enfc_pred]        = imx_clk_divider("enfc_pred",        "enfc_sel",          base + 0x2c, 18, 3);
+	clk[enfc_podf]        = imx_clk_divider("enfc_podf",        "enfc_pred",         base + 0x2c, 21, 6);
+	clk[emi_podf]         = imx_clk_divider("emi_podf",         "emi_sel",           base + 0x1c, 20, 3);
+	clk[emi_slow_podf]    = imx_clk_divider("emi_slow_podf",    "emi_slow_sel",      base + 0x1c, 23, 3);
+	clk[vpu_axi_podf]     = imx_clk_divider("vpu_axi_podf",     "vpu_axi_sel",       base + 0x24, 25, 3);
+	clk[cko1_podf]        = imx_clk_divider("cko1_podf",        "cko1_sel",          base + 0x60, 4,  3);
+
+	/*                                            name                 parent_name    reg        shift width busy: reg, shift */
+	clk[axi]               = imx_clk_busy_divider("axi",               "axi_sel",     base + 0x14, 16,  3,   base + 0x48, 0);
+	clk[mmdc_ch0_axi_podf] = imx_clk_busy_divider("mmdc_ch0_axi_podf", "periph",      base + 0x14, 19,  3,   base + 0x48, 4);
+	clk[mmdc_ch1_axi_podf] = imx_clk_busy_divider("mmdc_ch1_axi_podf", "periph2",     base + 0x14, 3,   3,   base + 0x48, 2);
+	clk[arm]               = imx_clk_busy_divider("arm",               "pll1_sw",     base + 0x10, 0,   3,   base + 0x48, 16);
+	clk[ahb]               = imx_clk_busy_divider("ahb",               "periph",      base + 0x14, 10,  3,   base + 0x48, 1);
+
+	/*                                name             parent_name          reg         shift */
+	clk[apbh_dma]     = imx_clk_gate2("apbh_dma",      "ahb",               base + 0x68, 4);
+	clk[asrc]         = imx_clk_gate2("asrc",          "asrc_podf",         base + 0x68, 6);
+	clk[can1_ipg]     = imx_clk_gate2("can1_ipg",      "ipg",               base + 0x68, 14);
+	clk[can1_serial]  = imx_clk_gate2("can1_serial",   "can_root",          base + 0x68, 16);
+	clk[can2_ipg]     = imx_clk_gate2("can2_ipg",      "ipg",               base + 0x68, 18);
+	clk[can2_serial]  = imx_clk_gate2("can2_serial",   "can_root",          base + 0x68, 20);
+	clk[ecspi1]       = imx_clk_gate2("ecspi1",        "ecspi_root",        base + 0x6c, 0);
+	clk[ecspi2]       = imx_clk_gate2("ecspi2",        "ecspi_root",        base + 0x6c, 2);
+	clk[ecspi3]       = imx_clk_gate2("ecspi3",        "ecspi_root",        base + 0x6c, 4);
+	clk[ecspi4]       = imx_clk_gate2("ecspi4",        "ecspi_root",        base + 0x6c, 6);
+	clk[ecspi5]       = imx_clk_gate2("ecspi5",        "ecspi_root",        base + 0x6c, 8);
+	clk[enet]         = imx_clk_gate2("enet",          "ipg",               base + 0x6c, 10);
+	clk[esai]         = imx_clk_gate2("esai",          "esai_podf",         base + 0x6c, 16);
+	clk[gpt_ipg]      = imx_clk_gate2("gpt_ipg",       "ipg",               base + 0x6c, 20);
+	clk[gpt_ipg_per]  = imx_clk_gate2("gpt_ipg_per",   "ipg_per",           base + 0x6c, 22);
+	clk[gpu2d_core]   = imx_clk_gate2("gpu2d_core",    "gpu2d_core_podf",   base + 0x6c, 24);
+	clk[gpu3d_core]   = imx_clk_gate2("gpu3d_core",    "gpu3d_core_podf",   base + 0x6c, 26);
+	clk[hdmi_iahb]    = imx_clk_gate2("hdmi_iahb",     "ahb",               base + 0x70, 0);
+	clk[hdmi_isfr]    = imx_clk_gate2("hdmi_isfr",     "pll3_pfd1_540m",    base + 0x70, 4);
+	clk[i2c1]         = imx_clk_gate2("i2c1",          "ipg_per",           base + 0x70, 6);
+	clk[i2c2]         = imx_clk_gate2("i2c2",          "ipg_per",           base + 0x70, 8);
+	clk[i2c3]         = imx_clk_gate2("i2c3",          "ipg_per",           base + 0x70, 10);
+	clk[iim]          = imx_clk_gate2("iim",           "ipg",               base + 0x70, 12);
+	clk[enfc]         = imx_clk_gate2("enfc",          "enfc_podf",         base + 0x70, 14);
+	clk[ipu1]         = imx_clk_gate2("ipu1",          "ipu1_podf",         base + 0x74, 0);
+	clk[ipu1_di0]     = imx_clk_gate2("ipu1_di0",      "ipu1_di0_sel",      base + 0x74, 2);
+	clk[ipu1_di1]     = imx_clk_gate2("ipu1_di1",      "ipu1_di1_sel",      base + 0x74, 4);
+	clk[ipu2]         = imx_clk_gate2("ipu2",          "ipu2_podf",         base + 0x74, 6);
+	clk[ipu2_di0]     = imx_clk_gate2("ipu2_di0",      "ipu2_di0_sel",      base + 0x74, 8);
+	clk[ldb_di0]      = imx_clk_gate2("ldb_di0",       "ldb_di0_podf",      base + 0x74, 12);
+	clk[ldb_di1]      = imx_clk_gate2("ldb_di1",       "ldb_di1_podf",      base + 0x74, 14);
+	clk[ipu2_di1]     = imx_clk_gate2("ipu2_di1",      "ipu2_di1_sel",      base + 0x74, 10);
+	clk[hsi_tx]       = imx_clk_gate2("hsi_tx",        "hsi_tx_podf",       base + 0x74, 16);
+	clk[mlb]          = imx_clk_gate2("mlb",           "pll6_mlb",          base + 0x74, 18);
+	clk[mmdc_ch0_axi] = imx_clk_gate2("mmdc_ch0_axi",  "mmdc_ch0_axi_podf", base + 0x74, 20);
+	clk[mmdc_ch1_axi] = imx_clk_gate2("mmdc_ch1_axi",  "mmdc_ch1_axi_podf", base + 0x74, 22);
+	clk[ocram]        = imx_clk_gate2("ocram",         "ahb",               base + 0x74, 28);
+	clk[openvg_axi]   = imx_clk_gate2("openvg_axi",    "axi",               base + 0x74, 30);
+	clk[pcie_axi]     = imx_clk_gate2("pcie_axi",      "pcie_axi_sel",      base + 0x78, 0);
+	clk[pwm1]         = imx_clk_gate2("pwm1",          "ipg_per",           base + 0x78, 16);
+	clk[pwm2]         = imx_clk_gate2("pwm2",          "ipg_per",           base + 0x78, 18);
+	clk[pwm3]         = imx_clk_gate2("pwm3",          "ipg_per",           base + 0x78, 20);
+	clk[pwm4]         = imx_clk_gate2("pwm4",          "ipg_per",           base + 0x78, 22);
+	clk[gpmi_bch_apb] = imx_clk_gate2("gpmi_bch_apb",  "usdhc3",            base + 0x78, 24);
+	clk[gpmi_bch]     = imx_clk_gate2("gpmi_bch",      "usdhc4",            base + 0x78, 26);
+	clk[gpmi_io]      = imx_clk_gate2("gpmi_io",       "enfc",              base + 0x78, 28);
+	clk[gpmi_apb]     = imx_clk_gate2("gpmi_apb",      "usdhc3",            base + 0x78, 30);
+	clk[sata]         = imx_clk_gate2("sata",          "ipg",               base + 0x7c, 4);
+	clk[sdma]         = imx_clk_gate2("sdma",          "ahb",               base + 0x7c, 6);
+	clk[spba]         = imx_clk_gate2("spba",          "ipg",               base + 0x7c, 12);
+	clk[ssi1_ipg]     = imx_clk_gate2("ssi1_ipg",      "ipg",               base + 0x7c, 18);
+	clk[ssi2_ipg]     = imx_clk_gate2("ssi2_ipg",      "ipg",               base + 0x7c, 20);
+	clk[ssi3_ipg]     = imx_clk_gate2("ssi3_ipg",      "ipg",               base + 0x7c, 22);
+	clk[uart_ipg]     = imx_clk_gate2("uart_ipg",      "ipg",               base + 0x7c, 24);
+	clk[uart_serial]  = imx_clk_gate2("uart_serial",   "uart_serial_podf",  base + 0x7c, 26);
+	clk[usboh3]       = imx_clk_gate2("usboh3",        "ipg",               base + 0x80, 0);
+	clk[usdhc1]       = imx_clk_gate2("usdhc1",        "usdhc1_podf",       base + 0x80, 2);
+	clk[usdhc2]       = imx_clk_gate2("usdhc2",        "usdhc2_podf",       base + 0x80, 4);
+	clk[usdhc3]       = imx_clk_gate2("usdhc3",        "usdhc3_podf",       base + 0x80, 6);
+	clk[usdhc4]       = imx_clk_gate2("usdhc4",        "usdhc4_podf",       base + 0x80, 8);
+	clk[vdo_axi]      = imx_clk_gate2("vdo_axi",       "vdo_axi_sel",       base + 0x80, 12);
+	clk[vpu_axi]      = imx_clk_gate2("vpu_axi",       "vpu_axi_podf",      base + 0x80, 14);
+	clk[cko1]         = imx_clk_gate("cko1",           "cko1_podf",         base + 0x60, 7);
+
+	for (i = 0; i < ARRAY_SIZE(clk); i++)
+		if (IS_ERR(clk[i]))
+			pr_err("i.MX6q clk %d: register failed with %ld\n",
+				i, PTR_ERR(clk[i]));
+
+	clk_register_clkdev(clk[mmdc_ch0_axi], NULL, "mmdc_ch0_axi");
+	clk_register_clkdev(clk[mmdc_ch1_axi], NULL, "mmdc_ch1_axi");
+	clk_register_clkdev(clk[gpt_ipg], "ipg", "imx-gpt.0");
+	clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0");
+	clk_register_clkdev(clk[twd], NULL, "smp_twd");
+	clk_register_clkdev(clk[usboh3], NULL, "usboh3");
+	clk_register_clkdev(clk[uart_serial], "per", "2020000.serial");
+	clk_register_clkdev(clk[uart_ipg], "ipg", "2020000.serial");
+	clk_register_clkdev(clk[uart_serial], "per", "21e8000.serial");
+	clk_register_clkdev(clk[uart_ipg], "ipg", "21e8000.serial");
+	clk_register_clkdev(clk[uart_serial], "per", "21ec000.serial");
+	clk_register_clkdev(clk[uart_ipg], "ipg", "21ec000.serial");
+	clk_register_clkdev(clk[uart_serial], "per", "21f0000.serial");
+	clk_register_clkdev(clk[uart_ipg], "ipg", "21f0000.serial");
+	clk_register_clkdev(clk[uart_serial], "per", "21f4000.serial");
+	clk_register_clkdev(clk[uart_ipg], "ipg", "21f4000.serial");
+	clk_register_clkdev(clk[enet], NULL, "2188000.ethernet");
+	clk_register_clkdev(clk[usdhc1], NULL, "2190000.usdhc");
+	clk_register_clkdev(clk[usdhc2], NULL, "2194000.usdhc");
+	clk_register_clkdev(clk[usdhc3], NULL, "2198000.usdhc");
+	clk_register_clkdev(clk[usdhc4], NULL, "219c000.usdhc");
+	clk_register_clkdev(clk[i2c1], NULL, "21a0000.i2c");
+	clk_register_clkdev(clk[i2c2], NULL, "21a4000.i2c");
+	clk_register_clkdev(clk[i2c3], NULL, "21a8000.i2c");
+	clk_register_clkdev(clk[ecspi1], NULL, "2008000.ecspi");
+	clk_register_clkdev(clk[ecspi2], NULL, "200c000.ecspi");
+	clk_register_clkdev(clk[ecspi3], NULL, "2010000.ecspi");
+	clk_register_clkdev(clk[ecspi4], NULL, "2014000.ecspi");
+	clk_register_clkdev(clk[ecspi5], NULL, "2018000.ecspi");
+	clk_register_clkdev(clk[sdma], NULL, "20ec000.sdma");
+	clk_register_clkdev(clk[dummy], NULL, "20bc000.wdog");
+	clk_register_clkdev(clk[dummy], NULL, "20c0000.wdog");
+	clk_register_clkdev(clk[ssi1_ipg], NULL, "2028000.ssi");
+	clk_register_clkdev(clk[cko1_sel], "cko1_sel", NULL);
+	clk_register_clkdev(clk[ahb], "ahb", NULL);
+	clk_register_clkdev(clk[cko1], "cko1", NULL);
+
+	for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) {
+		c = clk_get_sys(clks_init_on[i], NULL);
+		if (IS_ERR(c)) {
+			pr_err("%s: failed to get clk %s", __func__,
+			       clks_init_on[i]);
+			return PTR_ERR(c);
+		}
+		clk_prepare_enable(c);
+	}
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt");
+	base = of_iomap(np, 0);
+	WARN_ON(!base);
+	irq = irq_of_parse_and_map(np, 0);
+	mxc_timer_init(NULL, base, irq);
+
+	return 0;
+}
diff --git a/arch/arm/mach-imx/clk-pfd.c b/arch/arm/mach-imx/clk-pfd.c
new file mode 100644
index 000000000000..e2ed4160f329
--- /dev/null
+++ b/arch/arm/mach-imx/clk-pfd.c
@@ -0,0 +1,147 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2012 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include "clk.h"
+
+/**
+ * struct clk_pfd - IMX PFD clock
+ * @clk_hw:	clock source
+ * @reg:	PFD register address
+ * @idx:	the index of PFD encoded in the register
+ *
+ * PFD clock found on i.MX6 series.  Each register for PFD has 4 clk_pfd
+ * data encoded, and member idx is used to specify the one.  And each
+ * register has SET, CLR and TOG registers at offset 0x4 0x8 and 0xc.
+ */
+struct clk_pfd {
+	struct clk_hw	hw;
+	void __iomem	*reg;
+	u8		idx;
+};
+
+#define to_clk_pfd(_hw) container_of(_hw, struct clk_pfd, hw)
+
+#define SET	0x4
+#define CLR	0x8
+#define OTG	0xc
+
+static int clk_pfd_enable(struct clk_hw *hw)
+{
+	struct clk_pfd *pfd = to_clk_pfd(hw);
+
+	writel_relaxed(1 << ((pfd->idx + 1) * 8 - 1), pfd->reg + CLR);
+
+	return 0;
+}
+
+static void clk_pfd_disable(struct clk_hw *hw)
+{
+	struct clk_pfd *pfd = to_clk_pfd(hw);
+
+	writel_relaxed(1 << ((pfd->idx + 1) * 8 - 1), pfd->reg + SET);
+}
+
+static unsigned long clk_pfd_recalc_rate(struct clk_hw *hw,
+					 unsigned long parent_rate)
+{
+	struct clk_pfd *pfd = to_clk_pfd(hw);
+	u64 tmp = parent_rate;
+	u8 frac = (readl_relaxed(pfd->reg) >> (pfd->idx * 8)) & 0x3f;
+
+	tmp *= 18;
+	do_div(tmp, frac);
+
+	return tmp;
+}
+
+static long clk_pfd_round_rate(struct clk_hw *hw, unsigned long rate,
+			       unsigned long *prate)
+{
+	u64 tmp = *prate;
+	u8 frac;
+
+	tmp = tmp * 18 + rate / 2;
+	do_div(tmp, rate);
+	frac = tmp;
+	if (frac < 12)
+		frac = 12;
+	else if (frac > 35)
+		frac = 35;
+	tmp = *prate;
+	tmp *= 18;
+	do_div(tmp, frac);
+
+	return tmp;
+}
+
+static int clk_pfd_set_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long parent_rate)
+{
+	struct clk_pfd *pfd = to_clk_pfd(hw);
+	u64 tmp = parent_rate;
+	u8 frac;
+
+	tmp = tmp * 18 + rate / 2;
+	do_div(tmp, rate);
+	frac = tmp;
+	if (frac < 12)
+		frac = 12;
+	else if (frac > 35)
+		frac = 35;
+
+	writel_relaxed(0x3f << (pfd->idx * 8), pfd->reg + CLR);
+	writel_relaxed(frac << (pfd->idx * 8), pfd->reg + SET);
+
+	return 0;
+}
+
+static const struct clk_ops clk_pfd_ops = {
+	.enable		= clk_pfd_enable,
+	.disable	= clk_pfd_disable,
+	.recalc_rate	= clk_pfd_recalc_rate,
+	.round_rate	= clk_pfd_round_rate,
+	.set_rate	= clk_pfd_set_rate,
+};
+
+struct clk *imx_clk_pfd(const char *name, const char *parent_name,
+			void __iomem *reg, u8 idx)
+{
+	struct clk_pfd *pfd;
+	struct clk *clk;
+	struct clk_init_data init;
+
+	pfd = kzalloc(sizeof(*pfd), GFP_KERNEL);
+	if (!pfd)
+		return ERR_PTR(-ENOMEM);
+
+	pfd->reg = reg;
+	pfd->idx = idx;
+
+	init.name = name;
+	init.ops = &clk_pfd_ops;
+	init.flags = 0;
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+
+	pfd->hw.init = &init;
+
+	clk = clk_register(NULL, &pfd->hw);
+	if (IS_ERR(clk))
+		kfree(pfd);
+
+	return clk;
+}
diff --git a/arch/arm/mach-imx/clk-pllv1.c b/arch/arm/mach-imx/clk-pllv1.c
new file mode 100644
index 000000000000..2d856f9ccf59
--- /dev/null
+++ b/arch/arm/mach-imx/clk-pllv1.c
@@ -0,0 +1,66 @@
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/clock.h>
+#include "clk.h"
+
+/**
+ * pll v1
+ *
+ * @clk_hw	clock source
+ * @parent	the parent clock name
+ * @base	base address of pll registers
+ *
+ * PLL clock version 1, found on i.MX1/21/25/27/31/35
+ */
+struct clk_pllv1 {
+	struct clk_hw	hw;
+	void __iomem	*base;
+};
+
+#define to_clk_pllv1(clk) (container_of(clk, struct clk_pllv1, clk))
+
+static unsigned long clk_pllv1_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	struct clk_pllv1 *pll = to_clk_pllv1(hw);
+
+	return mxc_decode_pll(readl(pll->base), parent_rate);
+}
+
+struct clk_ops clk_pllv1_ops = {
+	.recalc_rate = clk_pllv1_recalc_rate,
+};
+
+struct clk *imx_clk_pllv1(const char *name, const char *parent,
+		void __iomem *base)
+{
+	struct clk_pllv1 *pll;
+	struct clk *clk;
+	struct clk_init_data init;
+
+	pll = kmalloc(sizeof(*pll), GFP_KERNEL);
+	if (!pll)
+		return ERR_PTR(-ENOMEM);
+
+	pll->base = base;
+
+	init.name = name;
+	init.ops = &clk_pllv1_ops;
+	init.flags = 0;
+	init.parent_names = &parent;
+	init.num_parents = 1;
+
+	pll->hw.init = &init;
+
+	clk = clk_register(NULL, &pll->hw);
+	if (IS_ERR(clk))
+		kfree(pll);
+
+	return clk;
+}
diff --git a/arch/arm/mach-imx/clk-pllv2.c b/arch/arm/mach-imx/clk-pllv2.c
new file mode 100644
index 000000000000..4685919deb63
--- /dev/null
+++ b/arch/arm/mach-imx/clk-pllv2.c
@@ -0,0 +1,249 @@
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+
+#include <asm/div64.h>
+
+#include "clk.h"
+
+#define to_clk_pllv2(clk) (container_of(clk, struct clk_pllv2, clk))
+
+/* PLL Register Offsets */
+#define MXC_PLL_DP_CTL			0x00
+#define MXC_PLL_DP_CONFIG		0x04
+#define MXC_PLL_DP_OP			0x08
+#define MXC_PLL_DP_MFD			0x0C
+#define MXC_PLL_DP_MFN			0x10
+#define MXC_PLL_DP_MFNMINUS		0x14
+#define MXC_PLL_DP_MFNPLUS		0x18
+#define MXC_PLL_DP_HFS_OP		0x1C
+#define MXC_PLL_DP_HFS_MFD		0x20
+#define MXC_PLL_DP_HFS_MFN		0x24
+#define MXC_PLL_DP_MFN_TOGC		0x28
+#define MXC_PLL_DP_DESTAT		0x2c
+
+/* PLL Register Bit definitions */
+#define MXC_PLL_DP_CTL_MUL_CTRL		0x2000
+#define MXC_PLL_DP_CTL_DPDCK0_2_EN	0x1000
+#define MXC_PLL_DP_CTL_DPDCK0_2_OFFSET	12
+#define MXC_PLL_DP_CTL_ADE		0x800
+#define MXC_PLL_DP_CTL_REF_CLK_DIV	0x400
+#define MXC_PLL_DP_CTL_REF_CLK_SEL_MASK	(3 << 8)
+#define MXC_PLL_DP_CTL_REF_CLK_SEL_OFFSET	8
+#define MXC_PLL_DP_CTL_HFSM		0x80
+#define MXC_PLL_DP_CTL_PRE		0x40
+#define MXC_PLL_DP_CTL_UPEN		0x20
+#define MXC_PLL_DP_CTL_RST		0x10
+#define MXC_PLL_DP_CTL_RCP		0x8
+#define MXC_PLL_DP_CTL_PLM		0x4
+#define MXC_PLL_DP_CTL_BRM0		0x2
+#define MXC_PLL_DP_CTL_LRF		0x1
+
+#define MXC_PLL_DP_CONFIG_BIST		0x8
+#define MXC_PLL_DP_CONFIG_SJC_CE	0x4
+#define MXC_PLL_DP_CONFIG_AREN		0x2
+#define MXC_PLL_DP_CONFIG_LDREQ		0x1
+
+#define MXC_PLL_DP_OP_MFI_OFFSET	4
+#define MXC_PLL_DP_OP_MFI_MASK		(0xF << 4)
+#define MXC_PLL_DP_OP_PDF_OFFSET	0
+#define MXC_PLL_DP_OP_PDF_MASK		0xF
+
+#define MXC_PLL_DP_MFD_OFFSET		0
+#define MXC_PLL_DP_MFD_MASK		0x07FFFFFF
+
+#define MXC_PLL_DP_MFN_OFFSET		0x0
+#define MXC_PLL_DP_MFN_MASK		0x07FFFFFF
+
+#define MXC_PLL_DP_MFN_TOGC_TOG_DIS	(1 << 17)
+#define MXC_PLL_DP_MFN_TOGC_TOG_EN	(1 << 16)
+#define MXC_PLL_DP_MFN_TOGC_CNT_OFFSET	0x0
+#define MXC_PLL_DP_MFN_TOGC_CNT_MASK	0xFFFF
+
+#define MXC_PLL_DP_DESTAT_TOG_SEL	(1 << 31)
+#define MXC_PLL_DP_DESTAT_MFN		0x07FFFFFF
+
+#define MAX_DPLL_WAIT_TRIES	1000 /* 1000 * udelay(1) = 1ms */
+
+struct clk_pllv2 {
+	struct clk_hw	hw;
+	void __iomem	*base;
+};
+
+static unsigned long clk_pllv2_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	long mfi, mfn, mfd, pdf, ref_clk, mfn_abs;
+	unsigned long dp_op, dp_mfd, dp_mfn, dp_ctl, pll_hfsm, dbl;
+	void __iomem *pllbase;
+	s64 temp;
+	struct clk_pllv2 *pll = to_clk_pllv2(hw);
+
+	pllbase = pll->base;
+
+	dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
+	pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM;
+	dbl = dp_ctl & MXC_PLL_DP_CTL_DPDCK0_2_EN;
+
+	if (pll_hfsm == 0) {
+		dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP);
+		dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD);
+		dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN);
+	} else {
+		dp_op = __raw_readl(pllbase + MXC_PLL_DP_HFS_OP);
+		dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFD);
+		dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFN);
+	}
+	pdf = dp_op & MXC_PLL_DP_OP_PDF_MASK;
+	mfi = (dp_op & MXC_PLL_DP_OP_MFI_MASK) >> MXC_PLL_DP_OP_MFI_OFFSET;
+	mfi = (mfi <= 5) ? 5 : mfi;
+	mfd = dp_mfd & MXC_PLL_DP_MFD_MASK;
+	mfn = mfn_abs = dp_mfn & MXC_PLL_DP_MFN_MASK;
+	/* Sign extend to 32-bits */
+	if (mfn >= 0x04000000) {
+		mfn |= 0xFC000000;
+		mfn_abs = -mfn;
+	}
+
+	ref_clk = 2 * parent_rate;
+	if (dbl != 0)
+		ref_clk *= 2;
+
+	ref_clk /= (pdf + 1);
+	temp = (u64) ref_clk * mfn_abs;
+	do_div(temp, mfd + 1);
+	if (mfn < 0)
+		temp = -temp;
+	temp = (ref_clk * mfi) + temp;
+
+	return temp;
+}
+
+static int clk_pllv2_set_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long parent_rate)
+{
+	struct clk_pllv2 *pll = to_clk_pllv2(hw);
+	u32 reg;
+	void __iomem *pllbase;
+	long mfi, pdf, mfn, mfd = 999999;
+	s64 temp64;
+	unsigned long quad_parent_rate;
+	unsigned long pll_hfsm, dp_ctl;
+
+	pllbase = pll->base;
+
+	quad_parent_rate = 4 * parent_rate;
+	pdf = mfi = -1;
+	while (++pdf < 16 && mfi < 5)
+		mfi = rate * (pdf+1) / quad_parent_rate;
+	if (mfi > 15)
+		return -EINVAL;
+	pdf--;
+
+	temp64 = rate * (pdf+1) - quad_parent_rate * mfi;
+	do_div(temp64, quad_parent_rate/1000000);
+	mfn = (long)temp64;
+
+	dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
+	/* use dpdck0_2 */
+	__raw_writel(dp_ctl | 0x1000L, pllbase + MXC_PLL_DP_CTL);
+	pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM;
+	if (pll_hfsm == 0) {
+		reg = mfi << 4 | pdf;
+		__raw_writel(reg, pllbase + MXC_PLL_DP_OP);
+		__raw_writel(mfd, pllbase + MXC_PLL_DP_MFD);
+		__raw_writel(mfn, pllbase + MXC_PLL_DP_MFN);
+	} else {
+		reg = mfi << 4 | pdf;
+		__raw_writel(reg, pllbase + MXC_PLL_DP_HFS_OP);
+		__raw_writel(mfd, pllbase + MXC_PLL_DP_HFS_MFD);
+		__raw_writel(mfn, pllbase + MXC_PLL_DP_HFS_MFN);
+	}
+
+	return 0;
+}
+
+static long clk_pllv2_round_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long *prate)
+{
+	return rate;
+}
+
+static int clk_pllv2_prepare(struct clk_hw *hw)
+{
+	struct clk_pllv2 *pll = to_clk_pllv2(hw);
+	u32 reg;
+	void __iomem *pllbase;
+	int i = 0;
+
+	pllbase = pll->base;
+	reg = __raw_readl(pllbase + MXC_PLL_DP_CTL) | MXC_PLL_DP_CTL_UPEN;
+	__raw_writel(reg, pllbase + MXC_PLL_DP_CTL);
+
+	/* Wait for lock */
+	do {
+		reg = __raw_readl(pllbase + MXC_PLL_DP_CTL);
+		if (reg & MXC_PLL_DP_CTL_LRF)
+			break;
+
+		udelay(1);
+	} while (++i < MAX_DPLL_WAIT_TRIES);
+
+	if (i == MAX_DPLL_WAIT_TRIES) {
+		pr_err("MX5: pll locking failed\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void clk_pllv2_unprepare(struct clk_hw *hw)
+{
+	struct clk_pllv2 *pll = to_clk_pllv2(hw);
+	u32 reg;
+	void __iomem *pllbase;
+
+	pllbase = pll->base;
+	reg = __raw_readl(pllbase + MXC_PLL_DP_CTL) & ~MXC_PLL_DP_CTL_UPEN;
+	__raw_writel(reg, pllbase + MXC_PLL_DP_CTL);
+}
+
+struct clk_ops clk_pllv2_ops = {
+	.prepare = clk_pllv2_prepare,
+	.unprepare = clk_pllv2_unprepare,
+	.recalc_rate = clk_pllv2_recalc_rate,
+	.round_rate = clk_pllv2_round_rate,
+	.set_rate = clk_pllv2_set_rate,
+};
+
+struct clk *imx_clk_pllv2(const char *name, const char *parent,
+		void __iomem *base)
+{
+	struct clk_pllv2 *pll;
+	struct clk *clk;
+	struct clk_init_data init;
+
+	pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+	if (!pll)
+		return ERR_PTR(-ENOMEM);
+
+	pll->base = base;
+
+	init.name = name;
+	init.ops = &clk_pllv2_ops;
+	init.flags = 0;
+	init.parent_names = &parent;
+	init.num_parents = 1;
+
+	pll->hw.init = &init;
+
+	clk = clk_register(NULL, &pll->hw);
+	if (IS_ERR(clk))
+		kfree(pll);
+
+	return clk;
+}
diff --git a/arch/arm/mach-imx/clk-pllv3.c b/arch/arm/mach-imx/clk-pllv3.c
new file mode 100644
index 000000000000..36aac947bce1
--- /dev/null
+++ b/arch/arm/mach-imx/clk-pllv3.c
@@ -0,0 +1,419 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2012 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/err.h>
+#include "clk.h"
+
+#define PLL_NUM_OFFSET		0x10
+#define PLL_DENOM_OFFSET	0x20
+
+#define BM_PLL_POWER		(0x1 << 12)
+#define BM_PLL_ENABLE		(0x1 << 13)
+#define BM_PLL_BYPASS		(0x1 << 16)
+#define BM_PLL_LOCK		(0x1 << 31)
+
+/**
+ * struct clk_pllv3 - IMX PLL clock version 3
+ * @clk_hw:	 clock source
+ * @base:	 base address of PLL registers
+ * @powerup_set: set POWER bit to power up the PLL
+ * @gate_mask:	 mask of gate bits
+ * @div_mask:	 mask of divider bits
+ *
+ * IMX PLL clock version 3, found on i.MX6 series.  Divider for pllv3
+ * is actually a multiplier, and always sits at bit 0.
+ */
+struct clk_pllv3 {
+	struct clk_hw	hw;
+	void __iomem	*base;
+	bool		powerup_set;
+	u32		gate_mask;
+	u32		div_mask;
+};
+
+#define to_clk_pllv3(_hw) container_of(_hw, struct clk_pllv3, hw)
+
+static int clk_pllv3_prepare(struct clk_hw *hw)
+{
+	struct clk_pllv3 *pll = to_clk_pllv3(hw);
+	unsigned long timeout = jiffies + msecs_to_jiffies(10);
+	u32 val;
+
+	val = readl_relaxed(pll->base);
+	val &= ~BM_PLL_BYPASS;
+	if (pll->powerup_set)
+		val |= BM_PLL_POWER;
+	else
+		val &= ~BM_PLL_POWER;
+	writel_relaxed(val, pll->base);
+
+	/* Wait for PLL to lock */
+	while (!(readl_relaxed(pll->base) & BM_PLL_LOCK))
+		if (time_after(jiffies, timeout))
+			return -ETIMEDOUT;
+
+	return 0;
+}
+
+static void clk_pllv3_unprepare(struct clk_hw *hw)
+{
+	struct clk_pllv3 *pll = to_clk_pllv3(hw);
+	u32 val;
+
+	val = readl_relaxed(pll->base);
+	val |= BM_PLL_BYPASS;
+	if (pll->powerup_set)
+		val &= ~BM_PLL_POWER;
+	else
+		val |= BM_PLL_POWER;
+	writel_relaxed(val, pll->base);
+}
+
+static int clk_pllv3_enable(struct clk_hw *hw)
+{
+	struct clk_pllv3 *pll = to_clk_pllv3(hw);
+	u32 val;
+
+	val = readl_relaxed(pll->base);
+	val |= pll->gate_mask;
+	writel_relaxed(val, pll->base);
+
+	return 0;
+}
+
+static void clk_pllv3_disable(struct clk_hw *hw)
+{
+	struct clk_pllv3 *pll = to_clk_pllv3(hw);
+	u32 val;
+
+	val = readl_relaxed(pll->base);
+	val &= ~pll->gate_mask;
+	writel_relaxed(val, pll->base);
+}
+
+static unsigned long clk_pllv3_recalc_rate(struct clk_hw *hw,
+					   unsigned long parent_rate)
+{
+	struct clk_pllv3 *pll = to_clk_pllv3(hw);
+	u32 div = readl_relaxed(pll->base)  & pll->div_mask;
+
+	return (div == 1) ? parent_rate * 22 : parent_rate * 20;
+}
+
+static long clk_pllv3_round_rate(struct clk_hw *hw, unsigned long rate,
+				 unsigned long *prate)
+{
+	unsigned long parent_rate = *prate;
+
+	return (rate >= parent_rate * 22) ? parent_rate * 22 :
+					    parent_rate * 20;
+}
+
+static int clk_pllv3_set_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long parent_rate)
+{
+	struct clk_pllv3 *pll = to_clk_pllv3(hw);
+	u32 val, div;
+
+	if (rate == parent_rate * 22)
+		div = 1;
+	else if (rate == parent_rate * 20)
+		div = 0;
+	else
+		return -EINVAL;
+
+	val = readl_relaxed(pll->base);
+	val &= ~pll->div_mask;
+	val |= div;
+	writel_relaxed(val, pll->base);
+
+	return 0;
+}
+
+static const struct clk_ops clk_pllv3_ops = {
+	.prepare	= clk_pllv3_prepare,
+	.unprepare	= clk_pllv3_unprepare,
+	.enable		= clk_pllv3_enable,
+	.disable	= clk_pllv3_disable,
+	.recalc_rate	= clk_pllv3_recalc_rate,
+	.round_rate	= clk_pllv3_round_rate,
+	.set_rate	= clk_pllv3_set_rate,
+};
+
+static unsigned long clk_pllv3_sys_recalc_rate(struct clk_hw *hw,
+					       unsigned long parent_rate)
+{
+	struct clk_pllv3 *pll = to_clk_pllv3(hw);
+	u32 div = readl_relaxed(pll->base) & pll->div_mask;
+
+	return parent_rate * div / 2;
+}
+
+static long clk_pllv3_sys_round_rate(struct clk_hw *hw, unsigned long rate,
+				     unsigned long *prate)
+{
+	unsigned long parent_rate = *prate;
+	unsigned long min_rate = parent_rate * 54 / 2;
+	unsigned long max_rate = parent_rate * 108 / 2;
+	u32 div;
+
+	if (rate > max_rate)
+		rate = max_rate;
+	else if (rate < min_rate)
+		rate = min_rate;
+	div = rate * 2 / parent_rate;
+
+	return parent_rate * div / 2;
+}
+
+static int clk_pllv3_sys_set_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long parent_rate)
+{
+	struct clk_pllv3 *pll = to_clk_pllv3(hw);
+	unsigned long min_rate = parent_rate * 54 / 2;
+	unsigned long max_rate = parent_rate * 108 / 2;
+	u32 val, div;
+
+	if (rate < min_rate || rate > max_rate)
+		return -EINVAL;
+
+	div = rate * 2 / parent_rate;
+	val = readl_relaxed(pll->base);
+	val &= ~pll->div_mask;
+	val |= div;
+	writel_relaxed(val, pll->base);
+
+	return 0;
+}
+
+static const struct clk_ops clk_pllv3_sys_ops = {
+	.prepare	= clk_pllv3_prepare,
+	.unprepare	= clk_pllv3_unprepare,
+	.enable		= clk_pllv3_enable,
+	.disable	= clk_pllv3_disable,
+	.recalc_rate	= clk_pllv3_sys_recalc_rate,
+	.round_rate	= clk_pllv3_sys_round_rate,
+	.set_rate	= clk_pllv3_sys_set_rate,
+};
+
+static unsigned long clk_pllv3_av_recalc_rate(struct clk_hw *hw,
+					      unsigned long parent_rate)
+{
+	struct clk_pllv3 *pll = to_clk_pllv3(hw);
+	u32 mfn = readl_relaxed(pll->base + PLL_NUM_OFFSET);
+	u32 mfd = readl_relaxed(pll->base + PLL_DENOM_OFFSET);
+	u32 div = readl_relaxed(pll->base) & pll->div_mask;
+
+	return (parent_rate * div) + ((parent_rate / mfd) * mfn);
+}
+
+static long clk_pllv3_av_round_rate(struct clk_hw *hw, unsigned long rate,
+				    unsigned long *prate)
+{
+	unsigned long parent_rate = *prate;
+	unsigned long min_rate = parent_rate * 27;
+	unsigned long max_rate = parent_rate * 54;
+	u32 div;
+	u32 mfn, mfd = 1000000;
+	s64 temp64;
+
+	if (rate > max_rate)
+		rate = max_rate;
+	else if (rate < min_rate)
+		rate = min_rate;
+
+	div = rate / parent_rate;
+	temp64 = (u64) (rate - div * parent_rate);
+	temp64 *= mfd;
+	do_div(temp64, parent_rate);
+	mfn = temp64;
+
+	return parent_rate * div + parent_rate / mfd * mfn;
+}
+
+static int clk_pllv3_av_set_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long parent_rate)
+{
+	struct clk_pllv3 *pll = to_clk_pllv3(hw);
+	unsigned long min_rate = parent_rate * 27;
+	unsigned long max_rate = parent_rate * 54;
+	u32 val, div;
+	u32 mfn, mfd = 1000000;
+	s64 temp64;
+
+	if (rate < min_rate || rate > max_rate)
+		return -EINVAL;
+
+	div = rate / parent_rate;
+	temp64 = (u64) (rate - div * parent_rate);
+	temp64 *= mfd;
+	do_div(temp64, parent_rate);
+	mfn = temp64;
+
+	val = readl_relaxed(pll->base);
+	val &= ~pll->div_mask;
+	val |= div;
+	writel_relaxed(val, pll->base);
+	writel_relaxed(mfn, pll->base + PLL_NUM_OFFSET);
+	writel_relaxed(mfd, pll->base + PLL_DENOM_OFFSET);
+
+	return 0;
+}
+
+static const struct clk_ops clk_pllv3_av_ops = {
+	.prepare	= clk_pllv3_prepare,
+	.unprepare	= clk_pllv3_unprepare,
+	.enable		= clk_pllv3_enable,
+	.disable	= clk_pllv3_disable,
+	.recalc_rate	= clk_pllv3_av_recalc_rate,
+	.round_rate	= clk_pllv3_av_round_rate,
+	.set_rate	= clk_pllv3_av_set_rate,
+};
+
+static unsigned long clk_pllv3_enet_recalc_rate(struct clk_hw *hw,
+						unsigned long parent_rate)
+{
+	struct clk_pllv3 *pll = to_clk_pllv3(hw);
+	u32 div = readl_relaxed(pll->base) & pll->div_mask;
+
+	switch (div) {
+	case 0:
+		return 25000000;
+	case 1:
+		return 50000000;
+	case 2:
+		return 100000000;
+	case 3:
+		return 125000000;
+	}
+
+	return 0;
+}
+
+static long clk_pllv3_enet_round_rate(struct clk_hw *hw, unsigned long rate,
+				      unsigned long *prate)
+{
+	if (rate >= 125000000)
+		rate = 125000000;
+	else if (rate >= 100000000)
+		rate = 100000000;
+	else if (rate >= 50000000)
+		rate = 50000000;
+	else
+		rate = 25000000;
+	return rate;
+}
+
+static int clk_pllv3_enet_set_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long parent_rate)
+{
+	struct clk_pllv3 *pll = to_clk_pllv3(hw);
+	u32 val, div;
+
+	switch (rate) {
+	case 25000000:
+		div = 0;
+		break;
+	case 50000000:
+		div = 1;
+		break;
+	case 100000000:
+		div = 2;
+		break;
+	case 125000000:
+		div = 3;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	val = readl_relaxed(pll->base);
+	val &= ~pll->div_mask;
+	val |= div;
+	writel_relaxed(val, pll->base);
+
+	return 0;
+}
+
+static const struct clk_ops clk_pllv3_enet_ops = {
+	.prepare	= clk_pllv3_prepare,
+	.unprepare	= clk_pllv3_unprepare,
+	.enable		= clk_pllv3_enable,
+	.disable	= clk_pllv3_disable,
+	.recalc_rate	= clk_pllv3_enet_recalc_rate,
+	.round_rate	= clk_pllv3_enet_round_rate,
+	.set_rate	= clk_pllv3_enet_set_rate,
+};
+
+static const struct clk_ops clk_pllv3_mlb_ops = {
+	.prepare	= clk_pllv3_prepare,
+	.unprepare	= clk_pllv3_unprepare,
+	.enable		= clk_pllv3_enable,
+	.disable	= clk_pllv3_disable,
+};
+
+struct clk *imx_clk_pllv3(enum imx_pllv3_type type, const char *name,
+			  const char *parent_name, void __iomem *base,
+			  u32 gate_mask, u32 div_mask)
+{
+	struct clk_pllv3 *pll;
+	const struct clk_ops *ops;
+	struct clk *clk;
+	struct clk_init_data init;
+
+	pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+	if (!pll)
+		return ERR_PTR(-ENOMEM);
+
+	switch (type) {
+	case IMX_PLLV3_SYS:
+		ops = &clk_pllv3_sys_ops;
+		break;
+	case IMX_PLLV3_USB:
+		ops = &clk_pllv3_ops;
+		pll->powerup_set = true;
+		break;
+	case IMX_PLLV3_AV:
+		ops = &clk_pllv3_av_ops;
+		break;
+	case IMX_PLLV3_ENET:
+		ops = &clk_pllv3_enet_ops;
+		break;
+	case IMX_PLLV3_MLB:
+		ops = &clk_pllv3_mlb_ops;
+		break;
+	default:
+		ops = &clk_pllv3_ops;
+	}
+	pll->base = base;
+	pll->gate_mask = gate_mask;
+	pll->div_mask = div_mask;
+
+	init.name = name;
+	init.ops = ops;
+	init.flags = 0;
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+
+	pll->hw.init = &init;
+
+	clk = clk_register(NULL, &pll->hw);
+	if (IS_ERR(clk))
+		kfree(pll);
+
+	return clk;
+}
diff --git a/arch/arm/mach-imx/clk.h b/arch/arm/mach-imx/clk.h
new file mode 100644
index 000000000000..1bf64fe2523c
--- /dev/null
+++ b/arch/arm/mach-imx/clk.h
@@ -0,0 +1,83 @@
+#ifndef __MACH_IMX_CLK_H
+#define __MACH_IMX_CLK_H
+
+#include <linux/spinlock.h>
+#include <linux/clk-provider.h>
+#include <mach/clock.h>
+
+struct clk *imx_clk_pllv1(const char *name, const char *parent,
+		void __iomem *base);
+
+struct clk *imx_clk_pllv2(const char *name, const char *parent,
+		void __iomem *base);
+
+enum imx_pllv3_type {
+	IMX_PLLV3_GENERIC,
+	IMX_PLLV3_SYS,
+	IMX_PLLV3_USB,
+	IMX_PLLV3_AV,
+	IMX_PLLV3_ENET,
+	IMX_PLLV3_MLB,
+};
+
+struct clk *imx_clk_pllv3(enum imx_pllv3_type type, const char *name,
+		const char *parent_name, void __iomem *base, u32 gate_mask,
+		u32 div_mask);
+
+struct clk *clk_register_gate2(struct device *dev, const char *name,
+		const char *parent_name, unsigned long flags,
+		void __iomem *reg, u8 bit_idx,
+		u8 clk_gate_flags, spinlock_t *lock);
+
+static inline struct clk *imx_clk_gate2(const char *name, const char *parent,
+		void __iomem *reg, u8 shift)
+{
+	return clk_register_gate2(NULL, name, parent, CLK_SET_RATE_PARENT, reg,
+			shift, 0, &imx_ccm_lock);
+}
+
+struct clk *imx_clk_pfd(const char *name, const char *parent_name,
+		void __iomem *reg, u8 idx);
+
+struct clk *imx_clk_busy_divider(const char *name, const char *parent_name,
+				 void __iomem *reg, u8 shift, u8 width,
+				 void __iomem *busy_reg, u8 busy_shift);
+
+struct clk *imx_clk_busy_mux(const char *name, void __iomem *reg, u8 shift,
+			     u8 width, void __iomem *busy_reg, u8 busy_shift,
+			     const char **parent_names, int num_parents);
+
+static inline struct clk *imx_clk_fixed(const char *name, int rate)
+{
+	return clk_register_fixed_rate(NULL, name, NULL, CLK_IS_ROOT, rate);
+}
+
+static inline struct clk *imx_clk_divider(const char *name, const char *parent,
+		void __iomem *reg, u8 shift, u8 width)
+{
+	return clk_register_divider(NULL, name, parent, CLK_SET_RATE_PARENT,
+			reg, shift, width, 0, &imx_ccm_lock);
+}
+
+static inline struct clk *imx_clk_gate(const char *name, const char *parent,
+		void __iomem *reg, u8 shift)
+{
+	return clk_register_gate(NULL, name, parent, CLK_SET_RATE_PARENT, reg,
+			shift, 0, &imx_ccm_lock);
+}
+
+static inline struct clk *imx_clk_mux(const char *name, void __iomem *reg,
+		u8 shift, u8 width, const char **parents, int num_parents)
+{
+	return clk_register_mux(NULL, name, parents, num_parents, 0, reg, shift,
+			width, 0, &imx_ccm_lock);
+}
+
+static inline struct clk *imx_clk_fixed_factor(const char *name,
+		const char *parent, unsigned int mult, unsigned int div)
+{
+	return clk_register_fixed_factor(NULL, name, parent,
+			CLK_SET_RATE_PARENT, mult, div);
+}
+
+#endif
diff --git a/arch/arm/mach-imx/clock-imx1.c b/arch/arm/mach-imx/clock-imx1.c
deleted file mode 100644
index 4aabeb241563..000000000000
--- a/arch/arm/mach-imx/clock-imx1.c
+++ /dev/null
@@ -1,636 +0,0 @@
-/*
- *  Copyright (C) 2008 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/math64.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-
-#include <mach/clock.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-
-#define IO_ADDR_CCM(off)	(MX1_IO_ADDRESS(MX1_CCM_BASE_ADDR + (off)))
-
-/* CCM register addresses */
-#define CCM_CSCR	IO_ADDR_CCM(0x0)
-#define CCM_MPCTL0	IO_ADDR_CCM(0x4)
-#define CCM_SPCTL0	IO_ADDR_CCM(0xc)
-#define CCM_PCDR	IO_ADDR_CCM(0x20)
-
-#define CCM_CSCR_CLKO_OFFSET	29
-#define CCM_CSCR_CLKO_MASK	(0x7 << 29)
-#define CCM_CSCR_USB_OFFSET	26
-#define CCM_CSCR_USB_MASK	(0x7 << 26)
-#define CCM_CSCR_OSC_EN_SHIFT	17
-#define CCM_CSCR_SYSTEM_SEL	(1 << 16)
-#define CCM_CSCR_BCLK_OFFSET	10
-#define CCM_CSCR_BCLK_MASK	(0xf << 10)
-#define CCM_CSCR_PRESC		(1 << 15)
-
-#define CCM_PCDR_PCLK3_OFFSET	16
-#define CCM_PCDR_PCLK3_MASK	(0x7f << 16)
-#define CCM_PCDR_PCLK2_OFFSET	4
-#define CCM_PCDR_PCLK2_MASK	(0xf << 4)
-#define CCM_PCDR_PCLK1_OFFSET	0
-#define CCM_PCDR_PCLK1_MASK	0xf
-
-#define IO_ADDR_SCM(off)	(MX1_IO_ADDRESS(MX1_SCM_BASE_ADDR + (off)))
-
-/* SCM register addresses */
-#define SCM_GCCR	IO_ADDR_SCM(0xc)
-
-#define SCM_GCCR_DMA_CLK_EN_OFFSET	3
-#define SCM_GCCR_CSI_CLK_EN_OFFSET	2
-#define SCM_GCCR_MMA_CLK_EN_OFFSET	1
-#define SCM_GCCR_USBD_CLK_EN_OFFSET	0
-
-static int _clk_enable(struct clk *clk)
-{
-	unsigned int reg;
-
-	reg = __raw_readl(clk->enable_reg);
-	reg |= 1 << clk->enable_shift;
-	__raw_writel(reg, clk->enable_reg);
-
-	return 0;
-}
-
-static void _clk_disable(struct clk *clk)
-{
-	unsigned int reg;
-
-	reg = __raw_readl(clk->enable_reg);
-	reg &= ~(1 << clk->enable_shift);
-	__raw_writel(reg, clk->enable_reg);
-}
-
-static int _clk_can_use_parent(const struct clk *clk_arr[], unsigned int size,
-			       struct clk *parent)
-{
-	int i;
-
-	for (i = 0; i < size; i++)
-		if (parent == clk_arr[i])
-			return i;
-
-	return -EINVAL;
-}
-
-static unsigned long
-_clk_simple_round_rate(struct clk *clk, unsigned long rate, unsigned int limit)
-{
-	int div;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	div = parent_rate / rate;
-	if (parent_rate % rate)
-		div++;
-
-	if (div > limit)
-		div = limit;
-
-	return parent_rate / div;
-}
-
-static unsigned long _clk_parent_round_rate(struct clk *clk, unsigned long rate)
-{
-	return clk->parent->round_rate(clk->parent, rate);
-}
-
-static int _clk_parent_set_rate(struct clk *clk, unsigned long rate)
-{
-	return clk->parent->set_rate(clk->parent, rate);
-}
-
-static unsigned long clk16m_get_rate(struct clk *clk)
-{
-	return 16000000;
-}
-
-static struct clk clk16m = {
-	.get_rate = clk16m_get_rate,
-	.enable = _clk_enable,
-	.enable_reg = CCM_CSCR,
-	.enable_shift = CCM_CSCR_OSC_EN_SHIFT,
-	.disable = _clk_disable,
-};
-
-/* in Hz */
-static unsigned long clk32_rate;
-
-static unsigned long clk32_get_rate(struct clk *clk)
-{
-	return clk32_rate;
-}
-
-static struct clk clk32 = {
-	.get_rate = clk32_get_rate,
-};
-
-static unsigned long clk32_premult_get_rate(struct clk *clk)
-{
-	return clk_get_rate(clk->parent) * 512;
-}
-
-static struct clk clk32_premult = {
-	.parent = &clk32,
-	.get_rate = clk32_premult_get_rate,
-};
-
-static const struct clk *prem_clk_clocks[] = {
-	&clk32_premult,
-	&clk16m,
-};
-
-static int prem_clk_set_parent(struct clk *clk, struct clk *parent)
-{
-	int i;
-	unsigned int reg = __raw_readl(CCM_CSCR);
-
-	i = _clk_can_use_parent(prem_clk_clocks, ARRAY_SIZE(prem_clk_clocks),
-				parent);
-
-	switch (i) {
-	case 0:
-		reg &= ~CCM_CSCR_SYSTEM_SEL;
-		break;
-	case 1:
-		reg |= CCM_CSCR_SYSTEM_SEL;
-		break;
-	default:
-		return i;
-	}
-
-	__raw_writel(reg, CCM_CSCR);
-
-	return 0;
-}
-
-static struct clk prem_clk = {
-	.set_parent = prem_clk_set_parent,
-};
-
-static unsigned long system_clk_get_rate(struct clk *clk)
-{
-	return mxc_decode_pll(__raw_readl(CCM_SPCTL0),
-			      clk_get_rate(clk->parent));
-}
-
-static struct clk system_clk = {
-	.parent = &prem_clk,
-	.get_rate = system_clk_get_rate,
-};
-
-static unsigned long mcu_clk_get_rate(struct clk *clk)
-{
-	return mxc_decode_pll(__raw_readl(CCM_MPCTL0),
-			      clk_get_rate(clk->parent));
-}
-
-static struct clk mcu_clk = {
-	.parent = &clk32_premult,
-	.get_rate = mcu_clk_get_rate,
-};
-
-static unsigned long fclk_get_rate(struct clk *clk)
-{
-	unsigned long fclk = clk_get_rate(clk->parent);
-
-	if (__raw_readl(CCM_CSCR) & CCM_CSCR_PRESC)
-		fclk /= 2;
-
-	return fclk;
-}
-
-static struct clk fclk = {
-	.parent = &mcu_clk,
-	.get_rate = fclk_get_rate,
-};
-
-/*
- *  get hclk ( SDRAM, CSI, Memory Stick, I2C, DMA )
- */
-static unsigned long hclk_get_rate(struct clk *clk)
-{
-	return clk_get_rate(clk->parent) / (((__raw_readl(CCM_CSCR) &
-			CCM_CSCR_BCLK_MASK) >> CCM_CSCR_BCLK_OFFSET) + 1);
-}
-
-static unsigned long hclk_round_rate(struct clk *clk, unsigned long rate)
-{
-	return _clk_simple_round_rate(clk, rate, 16);
-}
-
-static int hclk_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned int div;
-	unsigned int reg;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	div = parent_rate / rate;
-
-	if (div > 16 || div < 1 || ((parent_rate / div) != rate))
-		return -EINVAL;
-
-	div--;
-
-	reg = __raw_readl(CCM_CSCR);
-	reg &= ~CCM_CSCR_BCLK_MASK;
-	reg |= div << CCM_CSCR_BCLK_OFFSET;
-	__raw_writel(reg, CCM_CSCR);
-
-	return 0;
-}
-
-static struct clk hclk = {
-	.parent = &system_clk,
-	.get_rate = hclk_get_rate,
-	.round_rate = hclk_round_rate,
-	.set_rate = hclk_set_rate,
-};
-
-static unsigned long clk48m_get_rate(struct clk *clk)
-{
-	return clk_get_rate(clk->parent) / (((__raw_readl(CCM_CSCR) &
-			CCM_CSCR_USB_MASK) >> CCM_CSCR_USB_OFFSET) + 1);
-}
-
-static unsigned long clk48m_round_rate(struct clk *clk, unsigned long rate)
-{
-	return _clk_simple_round_rate(clk, rate, 8);
-}
-
-static int clk48m_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned int div;
-	unsigned int reg;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	div = parent_rate / rate;
-
-	if (div > 8 || div < 1 || ((parent_rate / div) != rate))
-		return -EINVAL;
-
-	div--;
-
-	reg = __raw_readl(CCM_CSCR);
-	reg &= ~CCM_CSCR_USB_MASK;
-	reg |= div << CCM_CSCR_USB_OFFSET;
-	__raw_writel(reg, CCM_CSCR);
-
-	return 0;
-}
-
-static struct clk clk48m = {
-	.parent = &system_clk,
-	.get_rate = clk48m_get_rate,
-	.round_rate = clk48m_round_rate,
-	.set_rate = clk48m_set_rate,
-};
-
-/*
- *  get peripheral clock 1 ( UART[12], Timer[12], PWM )
- */
-static unsigned long perclk1_get_rate(struct clk *clk)
-{
-	return clk_get_rate(clk->parent) / (((__raw_readl(CCM_PCDR) &
-			CCM_PCDR_PCLK1_MASK) >> CCM_PCDR_PCLK1_OFFSET) + 1);
-}
-
-static unsigned long perclk1_round_rate(struct clk *clk, unsigned long rate)
-{
-	return _clk_simple_round_rate(clk, rate, 16);
-}
-
-static int perclk1_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned int div;
-	unsigned int reg;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	div = parent_rate / rate;
-
-	if (div > 16 || div < 1 || ((parent_rate / div) != rate))
-		return -EINVAL;
-
-	div--;
-
-	reg = __raw_readl(CCM_PCDR);
-	reg &= ~CCM_PCDR_PCLK1_MASK;
-	reg |= div << CCM_PCDR_PCLK1_OFFSET;
-	__raw_writel(reg, CCM_PCDR);
-
-	return 0;
-}
-
-/*
- *  get peripheral clock 2 ( LCD, SD, SPI[12] )
- */
-static unsigned long perclk2_get_rate(struct clk *clk)
-{
-	return clk_get_rate(clk->parent) / (((__raw_readl(CCM_PCDR) &
-			CCM_PCDR_PCLK2_MASK) >> CCM_PCDR_PCLK2_OFFSET) + 1);
-}
-
-static unsigned long perclk2_round_rate(struct clk *clk, unsigned long rate)
-{
-	return _clk_simple_round_rate(clk, rate, 16);
-}
-
-static int perclk2_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned int div;
-	unsigned int reg;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	div = parent_rate / rate;
-
-	if (div > 16 || div < 1 || ((parent_rate / div) != rate))
-		return -EINVAL;
-
-	div--;
-
-	reg = __raw_readl(CCM_PCDR);
-	reg &= ~CCM_PCDR_PCLK2_MASK;
-	reg |= div << CCM_PCDR_PCLK2_OFFSET;
-	__raw_writel(reg, CCM_PCDR);
-
-	return 0;
-}
-
-/*
- *  get peripheral clock 3 ( SSI )
- */
-static unsigned long perclk3_get_rate(struct clk *clk)
-{
-	return clk_get_rate(clk->parent) / (((__raw_readl(CCM_PCDR) &
-			CCM_PCDR_PCLK3_MASK) >> CCM_PCDR_PCLK3_OFFSET) + 1);
-}
-
-static unsigned long perclk3_round_rate(struct clk *clk, unsigned long rate)
-{
-	return _clk_simple_round_rate(clk, rate, 128);
-}
-
-static int perclk3_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned int div;
-	unsigned int reg;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	div = parent_rate / rate;
-
-	if (div > 128 || div < 1 || ((parent_rate / div) != rate))
-		return -EINVAL;
-
-	div--;
-
-	reg = __raw_readl(CCM_PCDR);
-	reg &= ~CCM_PCDR_PCLK3_MASK;
-	reg |= div << CCM_PCDR_PCLK3_OFFSET;
-	__raw_writel(reg, CCM_PCDR);
-
-	return 0;
-}
-
-static struct clk perclk[] = {
-	{
-		.id = 0,
-		.parent = &system_clk,
-		.get_rate = perclk1_get_rate,
-		.round_rate = perclk1_round_rate,
-		.set_rate = perclk1_set_rate,
-	}, {
-		.id = 1,
-		.parent = &system_clk,
-		.get_rate = perclk2_get_rate,
-		.round_rate = perclk2_round_rate,
-		.set_rate = perclk2_set_rate,
-	}, {
-		.id = 2,
-		.parent = &system_clk,
-		.get_rate = perclk3_get_rate,
-		.round_rate = perclk3_round_rate,
-		.set_rate = perclk3_set_rate,
-	}
-};
-
-static const struct clk *clko_clocks[] = {
-	&perclk[0],
-	&hclk,
-	&clk48m,
-	&clk16m,
-	&prem_clk,
-	&fclk,
-};
-
-static int clko_set_parent(struct clk *clk, struct clk *parent)
-{
-	int i;
-	unsigned int reg;
-
-	i = _clk_can_use_parent(clko_clocks, ARRAY_SIZE(clko_clocks), parent);
-	if (i < 0)
-		return i;
-
-	reg = __raw_readl(CCM_CSCR) & ~CCM_CSCR_CLKO_MASK;
-	reg |= i << CCM_CSCR_CLKO_OFFSET;
-	__raw_writel(reg, CCM_CSCR);
-
-	if (clko_clocks[i]->set_rate && clko_clocks[i]->round_rate) {
-		clk->set_rate = _clk_parent_set_rate;
-		clk->round_rate = _clk_parent_round_rate;
-	} else {
-		clk->set_rate = NULL;
-		clk->round_rate = NULL;
-	}
-
-	return 0;
-}
-
-static struct clk clko_clk = {
-	.set_parent = clko_set_parent,
-};
-
-static struct clk dma_clk = {
-	.parent = &hclk,
-	.round_rate = _clk_parent_round_rate,
-	.set_rate = _clk_parent_set_rate,
-	.enable = _clk_enable,
-	.enable_reg = SCM_GCCR,
-	.enable_shift = SCM_GCCR_DMA_CLK_EN_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk csi_clk = {
-	.parent = &hclk,
-	.round_rate = _clk_parent_round_rate,
-	.set_rate = _clk_parent_set_rate,
-	.enable = _clk_enable,
-	.enable_reg = SCM_GCCR,
-	.enable_shift = SCM_GCCR_CSI_CLK_EN_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk mma_clk = {
-	.parent = &hclk,
-	.round_rate = _clk_parent_round_rate,
-	.set_rate = _clk_parent_set_rate,
-	.enable = _clk_enable,
-	.enable_reg = SCM_GCCR,
-	.enable_shift = SCM_GCCR_MMA_CLK_EN_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk usbd_clk = {
-	.parent = &clk48m,
-	.round_rate = _clk_parent_round_rate,
-	.set_rate = _clk_parent_set_rate,
-	.enable = _clk_enable,
-	.enable_reg = SCM_GCCR,
-	.enable_shift = SCM_GCCR_USBD_CLK_EN_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk gpt_clk = {
-	.parent = &perclk[0],
-	.round_rate = _clk_parent_round_rate,
-	.set_rate = _clk_parent_set_rate,
-};
-
-static struct clk uart_clk = {
-	.parent = &perclk[0],
-	.round_rate = _clk_parent_round_rate,
-	.set_rate = _clk_parent_set_rate,
-};
-
-static struct clk i2c_clk = {
-	.parent = &hclk,
-	.round_rate = _clk_parent_round_rate,
-	.set_rate = _clk_parent_set_rate,
-};
-
-static struct clk spi_clk = {
-	.parent = &perclk[1],
-	.round_rate = _clk_parent_round_rate,
-	.set_rate = _clk_parent_set_rate,
-};
-
-static struct clk sdhc_clk = {
-	.parent = &perclk[1],
-	.round_rate = _clk_parent_round_rate,
-	.set_rate = _clk_parent_set_rate,
-};
-
-static struct clk lcdc_clk = {
-	.parent = &perclk[1],
-	.round_rate = _clk_parent_round_rate,
-	.set_rate = _clk_parent_set_rate,
-};
-
-static struct clk mshc_clk = {
-	.parent = &hclk,
-	.round_rate = _clk_parent_round_rate,
-	.set_rate = _clk_parent_set_rate,
-};
-
-static struct clk ssi_clk = {
-	.parent = &perclk[2],
-	.round_rate = _clk_parent_round_rate,
-	.set_rate = _clk_parent_set_rate,
-};
-
-static struct clk rtc_clk = {
-	.parent = &clk32,
-};
-
-#define _REGISTER_CLOCK(d, n, c) \
-	{ \
-		.dev_id = d, \
-		.con_id = n, \
-		.clk = &c, \
-	},
-static struct clk_lookup lookups[] __initdata = {
-	_REGISTER_CLOCK(NULL, "dma", dma_clk)
-	_REGISTER_CLOCK("mx1-camera.0", NULL, csi_clk)
-	_REGISTER_CLOCK(NULL, "mma", mma_clk)
-	_REGISTER_CLOCK("imx_udc.0", NULL, usbd_clk)
-	_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
-	_REGISTER_CLOCK("imx1-uart.0", NULL, uart_clk)
-	_REGISTER_CLOCK("imx1-uart.1", NULL, uart_clk)
-	_REGISTER_CLOCK("imx1-uart.2", NULL, uart_clk)
-	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
-	_REGISTER_CLOCK("imx1-cspi.0", NULL, spi_clk)
-	_REGISTER_CLOCK("imx1-cspi.1", NULL, spi_clk)
-	_REGISTER_CLOCK("imx-mmc.0", NULL, sdhc_clk)
-	_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
-	_REGISTER_CLOCK(NULL, "mshc", mshc_clk)
-	_REGISTER_CLOCK(NULL, "ssi", ssi_clk)
-	_REGISTER_CLOCK("mxc_rtc.0", NULL, rtc_clk)
-};
-
-int __init mx1_clocks_init(unsigned long fref)
-{
-	unsigned int reg;
-
-	/* disable clocks we are able to */
-	__raw_writel(0, SCM_GCCR);
-
-	clk32_rate = fref;
-	reg = __raw_readl(CCM_CSCR);
-
-	/* detect clock reference for system PLL */
-	if (reg & CCM_CSCR_SYSTEM_SEL) {
-		prem_clk.parent = &clk16m;
-	} else {
-		/* ensure that oscillator is disabled */
-		reg &= ~(1 << CCM_CSCR_OSC_EN_SHIFT);
-		__raw_writel(reg, CCM_CSCR);
-		prem_clk.parent = &clk32_premult;
-	}
-
-	/* detect reference for CLKO */
-	reg = (reg & CCM_CSCR_CLKO_MASK) >> CCM_CSCR_CLKO_OFFSET;
-	clko_clk.parent = (struct clk *)clko_clocks[reg];
-
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
-	clk_enable(&hclk);
-	clk_enable(&fclk);
-
-	mxc_timer_init(&gpt_clk, MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR),
-			MX1_TIM1_INT);
-
-	return 0;
-}
diff --git a/arch/arm/mach-imx/clock-imx21.c b/arch/arm/mach-imx/clock-imx21.c
deleted file mode 100644
index ee15d8c9db08..000000000000
--- a/arch/arm/mach-imx/clock-imx21.c
+++ /dev/null
@@ -1,1239 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- * Copyright 2008 Martin Fuzzey, mfuzzey@gmail.com
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/clkdev.h>
-
-#include <mach/clock.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <asm/div64.h>
-
-#define IO_ADDR_CCM(off)	(MX21_IO_ADDRESS(MX21_CCM_BASE_ADDR + (off)))
-
-/* Register offsets */
-#define CCM_CSCR		IO_ADDR_CCM(0x0)
-#define CCM_MPCTL0		IO_ADDR_CCM(0x4)
-#define CCM_MPCTL1		IO_ADDR_CCM(0x8)
-#define CCM_SPCTL0		IO_ADDR_CCM(0xc)
-#define CCM_SPCTL1		IO_ADDR_CCM(0x10)
-#define CCM_OSC26MCTL		IO_ADDR_CCM(0x14)
-#define CCM_PCDR0		IO_ADDR_CCM(0x18)
-#define CCM_PCDR1		IO_ADDR_CCM(0x1c)
-#define CCM_PCCR0		IO_ADDR_CCM(0x20)
-#define CCM_PCCR1		IO_ADDR_CCM(0x24)
-#define CCM_CCSR		IO_ADDR_CCM(0x28)
-#define CCM_PMCTL		IO_ADDR_CCM(0x2c)
-#define CCM_PMCOUNT		IO_ADDR_CCM(0x30)
-#define CCM_WKGDCTL		IO_ADDR_CCM(0x34)
-
-#define CCM_CSCR_PRESC_OFFSET	29
-#define CCM_CSCR_PRESC_MASK	(0x7 << CCM_CSCR_PRESC_OFFSET)
-
-#define CCM_CSCR_USB_OFFSET	26
-#define CCM_CSCR_USB_MASK	(0x7 << CCM_CSCR_USB_OFFSET)
-#define CCM_CSCR_SD_OFFSET	24
-#define CCM_CSCR_SD_MASK	(0x3 << CCM_CSCR_SD_OFFSET)
-#define CCM_CSCR_SPLLRES	(1 << 22)
-#define CCM_CSCR_MPLLRES	(1 << 21)
-#define CCM_CSCR_SSI2_OFFSET	20
-#define CCM_CSCR_SSI2		(1 << CCM_CSCR_SSI2_OFFSET)
-#define CCM_CSCR_SSI1_OFFSET	19
-#define CCM_CSCR_SSI1		(1 << CCM_CSCR_SSI1_OFFSET)
-#define CCM_CSCR_FIR_OFFSET	18
-#define CCM_CSCR_FIR		(1 << CCM_CSCR_FIR_OFFSET)
-#define CCM_CSCR_SP		(1 << 17)
-#define CCM_CSCR_MCU		(1 << 16)
-#define CCM_CSCR_BCLK_OFFSET	10
-#define CCM_CSCR_BCLK_MASK	(0xf << CCM_CSCR_BCLK_OFFSET)
-#define CCM_CSCR_IPDIV_OFFSET	9
-#define CCM_CSCR_IPDIV		(1 << CCM_CSCR_IPDIV_OFFSET)
-
-#define CCM_CSCR_OSC26MDIV	(1 << 4)
-#define CCM_CSCR_OSC26M		(1 << 3)
-#define CCM_CSCR_FPM		(1 << 2)
-#define CCM_CSCR_SPEN		(1 << 1)
-#define CCM_CSCR_MPEN		1
-
-#define CCM_MPCTL0_CPLM		(1 << 31)
-#define CCM_MPCTL0_PD_OFFSET	26
-#define CCM_MPCTL0_PD_MASK	(0xf << 26)
-#define CCM_MPCTL0_MFD_OFFSET	16
-#define CCM_MPCTL0_MFD_MASK	(0x3ff << 16)
-#define CCM_MPCTL0_MFI_OFFSET	10
-#define CCM_MPCTL0_MFI_MASK	(0xf << 10)
-#define CCM_MPCTL0_MFN_OFFSET	0
-#define CCM_MPCTL0_MFN_MASK	0x3ff
-
-#define CCM_MPCTL1_LF		(1 << 15)
-#define CCM_MPCTL1_BRMO		(1 << 6)
-
-#define CCM_SPCTL0_CPLM		(1 << 31)
-#define CCM_SPCTL0_PD_OFFSET	26
-#define CCM_SPCTL0_PD_MASK	(0xf << 26)
-#define CCM_SPCTL0_MFD_OFFSET	16
-#define CCM_SPCTL0_MFD_MASK	(0x3ff << 16)
-#define CCM_SPCTL0_MFI_OFFSET	10
-#define CCM_SPCTL0_MFI_MASK	(0xf << 10)
-#define CCM_SPCTL0_MFN_OFFSET	0
-#define CCM_SPCTL0_MFN_MASK	0x3ff
-
-#define CCM_SPCTL1_LF		(1 << 15)
-#define CCM_SPCTL1_BRMO		(1 << 6)
-
-#define CCM_OSC26MCTL_PEAK_OFFSET	16
-#define CCM_OSC26MCTL_PEAK_MASK		(0x3 << 16)
-#define CCM_OSC26MCTL_AGC_OFFSET	8
-#define CCM_OSC26MCTL_AGC_MASK		(0x3f << 8)
-#define CCM_OSC26MCTL_ANATEST_OFFSET	0
-#define CCM_OSC26MCTL_ANATEST_MASK	0x3f
-
-#define CCM_PCDR0_SSI2BAUDDIV_OFFSET	26
-#define CCM_PCDR0_SSI2BAUDDIV_MASK	(0x3f << 26)
-#define CCM_PCDR0_SSI1BAUDDIV_OFFSET	16
-#define CCM_PCDR0_SSI1BAUDDIV_MASK	(0x3f << 16)
-#define CCM_PCDR0_NFCDIV_OFFSET		12
-#define CCM_PCDR0_NFCDIV_MASK		(0xf << 12)
-#define CCM_PCDR0_48MDIV_OFFSET		5
-#define CCM_PCDR0_48MDIV_MASK		(0x7 << CCM_PCDR0_48MDIV_OFFSET)
-#define CCM_PCDR0_FIRIDIV_OFFSET	0
-#define CCM_PCDR0_FIRIDIV_MASK		0x1f
-#define CCM_PCDR1_PERDIV4_OFFSET	24
-#define CCM_PCDR1_PERDIV4_MASK		(0x3f << 24)
-#define CCM_PCDR1_PERDIV3_OFFSET	16
-#define CCM_PCDR1_PERDIV3_MASK		(0x3f << 16)
-#define CCM_PCDR1_PERDIV2_OFFSET	8
-#define CCM_PCDR1_PERDIV2_MASK		(0x3f << 8)
-#define CCM_PCDR1_PERDIV1_OFFSET	0
-#define CCM_PCDR1_PERDIV1_MASK		0x3f
-
-#define CCM_PCCR_HCLK_CSI_OFFSET	31
-#define CCM_PCCR_HCLK_CSI_REG		CCM_PCCR0
-#define CCM_PCCR_HCLK_DMA_OFFSET	30
-#define CCM_PCCR_HCLK_DMA_REG		CCM_PCCR0
-#define CCM_PCCR_HCLK_BROM_OFFSET	28
-#define CCM_PCCR_HCLK_BROM_REG		CCM_PCCR0
-#define CCM_PCCR_HCLK_EMMA_OFFSET	27
-#define CCM_PCCR_HCLK_EMMA_REG		CCM_PCCR0
-#define CCM_PCCR_HCLK_LCDC_OFFSET	26
-#define CCM_PCCR_HCLK_LCDC_REG		CCM_PCCR0
-#define CCM_PCCR_HCLK_SLCDC_OFFSET	25
-#define CCM_PCCR_HCLK_SLCDC_REG		CCM_PCCR0
-#define CCM_PCCR_HCLK_USBOTG_OFFSET	24
-#define CCM_PCCR_HCLK_USBOTG_REG	CCM_PCCR0
-#define CCM_PCCR_HCLK_BMI_OFFSET	23
-#define CCM_PCCR_BMI_MASK		(1 << CCM_PCCR_BMI_MASK)
-#define CCM_PCCR_HCLK_BMI_REG		CCM_PCCR0
-#define CCM_PCCR_PERCLK4_OFFSET		22
-#define CCM_PCCR_PERCLK4_REG		CCM_PCCR0
-#define CCM_PCCR_SLCDC_OFFSET		21
-#define CCM_PCCR_SLCDC_REG		CCM_PCCR0
-#define CCM_PCCR_FIRI_BAUD_OFFSET	20
-#define CCM_PCCR_FIRI_BAUD_MASK		(1 << CCM_PCCR_FIRI_BAUD_MASK)
-#define CCM_PCCR_FIRI_BAUD_REG		CCM_PCCR0
-#define CCM_PCCR_NFC_OFFSET		19
-#define CCM_PCCR_NFC_REG		CCM_PCCR0
-#define CCM_PCCR_LCDC_OFFSET		18
-#define CCM_PCCR_LCDC_REG		CCM_PCCR0
-#define CCM_PCCR_SSI1_BAUD_OFFSET	17
-#define CCM_PCCR_SSI1_BAUD_REG		CCM_PCCR0
-#define CCM_PCCR_SSI2_BAUD_OFFSET	16
-#define CCM_PCCR_SSI2_BAUD_REG		CCM_PCCR0
-#define CCM_PCCR_EMMA_OFFSET		15
-#define CCM_PCCR_EMMA_REG		CCM_PCCR0
-#define CCM_PCCR_USBOTG_OFFSET		14
-#define CCM_PCCR_USBOTG_REG		CCM_PCCR0
-#define CCM_PCCR_DMA_OFFSET		13
-#define CCM_PCCR_DMA_REG		CCM_PCCR0
-#define CCM_PCCR_I2C1_OFFSET		12
-#define CCM_PCCR_I2C1_REG		CCM_PCCR0
-#define CCM_PCCR_GPIO_OFFSET		11
-#define CCM_PCCR_GPIO_REG		CCM_PCCR0
-#define CCM_PCCR_SDHC2_OFFSET		10
-#define CCM_PCCR_SDHC2_REG		CCM_PCCR0
-#define CCM_PCCR_SDHC1_OFFSET		9
-#define CCM_PCCR_SDHC1_REG		CCM_PCCR0
-#define CCM_PCCR_FIRI_OFFSET		8
-#define CCM_PCCR_FIRI_MASK		(1 << CCM_PCCR_BAUD_MASK)
-#define CCM_PCCR_FIRI_REG		CCM_PCCR0
-#define CCM_PCCR_SSI2_IPG_OFFSET	7
-#define CCM_PCCR_SSI2_REG		CCM_PCCR0
-#define CCM_PCCR_SSI1_IPG_OFFSET	6
-#define CCM_PCCR_SSI1_REG		CCM_PCCR0
-#define CCM_PCCR_CSPI2_OFFSET		5
-#define	CCM_PCCR_CSPI2_REG		CCM_PCCR0
-#define CCM_PCCR_CSPI1_OFFSET		4
-#define	CCM_PCCR_CSPI1_REG		CCM_PCCR0
-#define CCM_PCCR_UART4_OFFSET		3
-#define CCM_PCCR_UART4_REG		CCM_PCCR0
-#define CCM_PCCR_UART3_OFFSET		2
-#define CCM_PCCR_UART3_REG		CCM_PCCR0
-#define CCM_PCCR_UART2_OFFSET		1
-#define CCM_PCCR_UART2_REG		CCM_PCCR0
-#define CCM_PCCR_UART1_OFFSET		0
-#define CCM_PCCR_UART1_REG		CCM_PCCR0
-
-#define CCM_PCCR_OWIRE_OFFSET		31
-#define CCM_PCCR_OWIRE_REG		CCM_PCCR1
-#define CCM_PCCR_KPP_OFFSET		30
-#define CCM_PCCR_KPP_REG		CCM_PCCR1
-#define CCM_PCCR_RTC_OFFSET		29
-#define CCM_PCCR_RTC_REG		CCM_PCCR1
-#define CCM_PCCR_PWM_OFFSET		28
-#define CCM_PCCR_PWM_REG		CCM_PCCR1
-#define CCM_PCCR_GPT3_OFFSET		27
-#define CCM_PCCR_GPT3_REG		CCM_PCCR1
-#define CCM_PCCR_GPT2_OFFSET		26
-#define CCM_PCCR_GPT2_REG		CCM_PCCR1
-#define CCM_PCCR_GPT1_OFFSET		25
-#define CCM_PCCR_GPT1_REG		CCM_PCCR1
-#define CCM_PCCR_WDT_OFFSET		24
-#define CCM_PCCR_WDT_REG		CCM_PCCR1
-#define CCM_PCCR_CSPI3_OFFSET		23
-#define	CCM_PCCR_CSPI3_REG		CCM_PCCR1
-
-#define CCM_PCCR_CSPI1_MASK		(1 << CCM_PCCR_CSPI1_OFFSET)
-#define CCM_PCCR_CSPI2_MASK		(1 << CCM_PCCR_CSPI2_OFFSET)
-#define CCM_PCCR_CSPI3_MASK		(1 << CCM_PCCR_CSPI3_OFFSET)
-#define CCM_PCCR_DMA_MASK		(1 << CCM_PCCR_DMA_OFFSET)
-#define CCM_PCCR_EMMA_MASK		(1 << CCM_PCCR_EMMA_OFFSET)
-#define CCM_PCCR_GPIO_MASK		(1 << CCM_PCCR_GPIO_OFFSET)
-#define CCM_PCCR_GPT1_MASK		(1 << CCM_PCCR_GPT1_OFFSET)
-#define CCM_PCCR_GPT2_MASK		(1 << CCM_PCCR_GPT2_OFFSET)
-#define CCM_PCCR_GPT3_MASK		(1 << CCM_PCCR_GPT3_OFFSET)
-#define CCM_PCCR_HCLK_BROM_MASK		(1 << CCM_PCCR_HCLK_BROM_OFFSET)
-#define CCM_PCCR_HCLK_CSI_MASK		(1 << CCM_PCCR_HCLK_CSI_OFFSET)
-#define CCM_PCCR_HCLK_DMA_MASK		(1 << CCM_PCCR_HCLK_DMA_OFFSET)
-#define CCM_PCCR_HCLK_EMMA_MASK		(1 << CCM_PCCR_HCLK_EMMA_OFFSET)
-#define CCM_PCCR_HCLK_LCDC_MASK		(1 << CCM_PCCR_HCLK_LCDC_OFFSET)
-#define CCM_PCCR_HCLK_SLCDC_MASK	(1 << CCM_PCCR_HCLK_SLCDC_OFFSET)
-#define CCM_PCCR_HCLK_USBOTG_MASK	(1 << CCM_PCCR_HCLK_USBOTG_OFFSET)
-#define CCM_PCCR_I2C1_MASK		(1 << CCM_PCCR_I2C1_OFFSET)
-#define CCM_PCCR_KPP_MASK		(1 << CCM_PCCR_KPP_OFFSET)
-#define CCM_PCCR_LCDC_MASK		(1 << CCM_PCCR_LCDC_OFFSET)
-#define CCM_PCCR_NFC_MASK		(1 << CCM_PCCR_NFC_OFFSET)
-#define CCM_PCCR_OWIRE_MASK		(1 << CCM_PCCR_OWIRE_OFFSET)
-#define CCM_PCCR_PERCLK4_MASK		(1 << CCM_PCCR_PERCLK4_OFFSET)
-#define CCM_PCCR_PWM_MASK		(1 << CCM_PCCR_PWM_OFFSET)
-#define CCM_PCCR_RTC_MASK		(1 << CCM_PCCR_RTC_OFFSET)
-#define CCM_PCCR_SDHC1_MASK		(1 << CCM_PCCR_SDHC1_OFFSET)
-#define CCM_PCCR_SDHC2_MASK		(1 << CCM_PCCR_SDHC2_OFFSET)
-#define CCM_PCCR_SLCDC_MASK		(1 << CCM_PCCR_SLCDC_OFFSET)
-#define CCM_PCCR_SSI1_BAUD_MASK		(1 << CCM_PCCR_SSI1_BAUD_OFFSET)
-#define CCM_PCCR_SSI1_IPG_MASK		(1 << CCM_PCCR_SSI1_IPG_OFFSET)
-#define CCM_PCCR_SSI2_BAUD_MASK		(1 << CCM_PCCR_SSI2_BAUD_OFFSET)
-#define CCM_PCCR_SSI2_IPG_MASK		(1 << CCM_PCCR_SSI2_IPG_OFFSET)
-#define CCM_PCCR_UART1_MASK		(1 << CCM_PCCR_UART1_OFFSET)
-#define CCM_PCCR_UART2_MASK		(1 << CCM_PCCR_UART2_OFFSET)
-#define CCM_PCCR_UART3_MASK		(1 << CCM_PCCR_UART3_OFFSET)
-#define CCM_PCCR_UART4_MASK		(1 << CCM_PCCR_UART4_OFFSET)
-#define CCM_PCCR_USBOTG_MASK		(1 << CCM_PCCR_USBOTG_OFFSET)
-#define CCM_PCCR_WDT_MASK		(1 << CCM_PCCR_WDT_OFFSET)
-
-#define CCM_CCSR_32KSR		(1 << 15)
-
-#define CCM_CCSR_CLKMODE1	(1 << 9)
-#define CCM_CCSR_CLKMODE0	(1 << 8)
-
-#define CCM_CCSR_CLKOSEL_OFFSET 0
-#define CCM_CCSR_CLKOSEL_MASK	0x1f
-
-#define SYS_FMCR		0x14	/* Functional Muxing Control Reg */
-#define SYS_CHIP_ID		0x00	/* The offset of CHIP ID register */
-
-static int _clk_enable(struct clk *clk)
-{
-	u32 reg;
-
-	reg = __raw_readl(clk->enable_reg);
-	reg |= 1 << clk->enable_shift;
-	__raw_writel(reg, clk->enable_reg);
-	return 0;
-}
-
-static void _clk_disable(struct clk *clk)
-{
-	u32 reg;
-
-	reg = __raw_readl(clk->enable_reg);
-	reg &= ~(1 << clk->enable_shift);
-	__raw_writel(reg, clk->enable_reg);
-}
-
-static unsigned long _clk_generic_round_rate(struct clk *clk,
-			unsigned long rate,
-			u32 max_divisor)
-{
-	u32 div;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	div = parent_rate / rate;
-	if (parent_rate % rate)
-		div++;
-
-	if (div > max_divisor)
-		div = max_divisor;
-
-	return parent_rate / div;
-}
-
-static int _clk_spll_enable(struct clk *clk)
-{
-	u32 reg;
-
-	reg = __raw_readl(CCM_CSCR);
-	reg |= CCM_CSCR_SPEN;
-	__raw_writel(reg, CCM_CSCR);
-
-	while ((__raw_readl(CCM_SPCTL1) & CCM_SPCTL1_LF) == 0)
-		;
-	return 0;
-}
-
-static void _clk_spll_disable(struct clk *clk)
-{
-	u32 reg;
-
-	reg = __raw_readl(CCM_CSCR);
-	reg &= ~CCM_CSCR_SPEN;
-	__raw_writel(reg, CCM_CSCR);
-}
-
-
-#define CSCR() (__raw_readl(CCM_CSCR))
-#define PCDR0() (__raw_readl(CCM_PCDR0))
-#define PCDR1() (__raw_readl(CCM_PCDR1))
-
-static unsigned long _clk_perclkx_round_rate(struct clk *clk,
-					     unsigned long rate)
-{
-	return _clk_generic_round_rate(clk, rate, 64);
-}
-
-static int _clk_perclkx_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 reg;
-	u32 div;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	if (clk->id < 0 || clk->id > 3)
-		return -EINVAL;
-
-	div = parent_rate / rate;
-	if (div > 64 || div < 1 || ((parent_rate / div) != rate))
-		return -EINVAL;
-	div--;
-
-	reg =
-	    __raw_readl(CCM_PCDR1) & ~(CCM_PCDR1_PERDIV1_MASK <<
-				       (clk->id << 3));
-	reg |= div << (clk->id << 3);
-	__raw_writel(reg, CCM_PCDR1);
-
-	return 0;
-}
-
-static unsigned long _clk_usb_recalc(struct clk *clk)
-{
-	unsigned long usb_pdf;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	usb_pdf = (CSCR() & CCM_CSCR_USB_MASK) >> CCM_CSCR_USB_OFFSET;
-
-	return parent_rate / (usb_pdf + 1U);
-}
-
-static unsigned long _clk_usb_round_rate(struct clk *clk,
-					     unsigned long rate)
-{
-	return _clk_generic_round_rate(clk, rate, 8);
-}
-
-static int _clk_usb_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 reg;
-	u32 div;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	div = parent_rate / rate;
-	if (div > 8 || div < 1 || ((parent_rate / div) != rate))
-		return -EINVAL;
-	div--;
-
-	reg = CSCR() & ~CCM_CSCR_USB_MASK;
-	reg |= div << CCM_CSCR_USB_OFFSET;
-	__raw_writel(reg, CCM_CSCR);
-
-	return 0;
-}
-
-static unsigned long _clk_ssix_recalc(struct clk *clk, unsigned long pdf)
-{
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	pdf = (pdf < 2) ? 124UL : pdf;  /* MX21 & MX27 TO1 */
-
-	return 2UL * parent_rate / pdf;
-}
-
-static unsigned long _clk_ssi1_recalc(struct clk *clk)
-{
-	return _clk_ssix_recalc(clk,
-		(PCDR0() & CCM_PCDR0_SSI1BAUDDIV_MASK)
-		>> CCM_PCDR0_SSI1BAUDDIV_OFFSET);
-}
-
-static unsigned long _clk_ssi2_recalc(struct clk *clk)
-{
-	return _clk_ssix_recalc(clk,
-		(PCDR0() & CCM_PCDR0_SSI2BAUDDIV_MASK) >>
-		CCM_PCDR0_SSI2BAUDDIV_OFFSET);
-}
-
-static unsigned long _clk_nfc_recalc(struct clk *clk)
-{
-	unsigned long nfc_pdf;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	nfc_pdf = (PCDR0() & CCM_PCDR0_NFCDIV_MASK)
-		>> CCM_PCDR0_NFCDIV_OFFSET;
-
-	return parent_rate / (nfc_pdf + 1);
-}
-
-static unsigned long _clk_parent_round_rate(struct clk *clk, unsigned long rate)
-{
-	return clk->parent->round_rate(clk->parent, rate);
-}
-
-static int _clk_parent_set_rate(struct clk *clk, unsigned long rate)
-{
-	return clk->parent->set_rate(clk->parent, rate);
-}
-
-static unsigned long external_high_reference; /* in Hz */
-
-static unsigned long get_high_reference_clock_rate(struct clk *clk)
-{
-	return external_high_reference;
-}
-
-/*
- * the high frequency external clock reference
- * Default case is 26MHz.
- */
-static struct clk ckih_clk = {
-	.get_rate = get_high_reference_clock_rate,
-};
-
-static unsigned long external_low_reference; /* in Hz */
-
-static unsigned long get_low_reference_clock_rate(struct clk *clk)
-{
-	return external_low_reference;
-}
-
-/*
- * the low frequency external clock reference
- * Default case is 32.768kHz.
- */
-static struct clk ckil_clk = {
-	.get_rate = get_low_reference_clock_rate,
-};
-
-
-static unsigned long _clk_fpm_recalc(struct clk *clk)
-{
-	return clk_get_rate(clk->parent) * 512;
-}
-
-/* Output of frequency pre multiplier */
-static struct clk fpm_clk = {
-	.parent = &ckil_clk,
-	.get_rate = _clk_fpm_recalc,
-};
-
-static unsigned long get_mpll_clk(struct clk *clk)
-{
-	uint32_t reg;
-	unsigned long ref_clk;
-	unsigned long mfi = 0, mfn = 0, mfd = 0, pdf = 0;
-	unsigned long long temp;
-
-	ref_clk = clk_get_rate(clk->parent);
-
-	reg = __raw_readl(CCM_MPCTL0);
-	pdf = (reg & CCM_MPCTL0_PD_MASK)  >> CCM_MPCTL0_PD_OFFSET;
-	mfd = (reg & CCM_MPCTL0_MFD_MASK) >> CCM_MPCTL0_MFD_OFFSET;
-	mfi = (reg & CCM_MPCTL0_MFI_MASK) >> CCM_MPCTL0_MFI_OFFSET;
-	mfn = (reg & CCM_MPCTL0_MFN_MASK) >> CCM_MPCTL0_MFN_OFFSET;
-
-	mfi = (mfi <= 5) ? 5 : mfi;
-	temp = 2LL * ref_clk * mfn;
-	do_div(temp, mfd + 1);
-	temp = 2LL * ref_clk * mfi + temp;
-	do_div(temp, pdf + 1);
-
-	return (unsigned long)temp;
-}
-
-static struct clk mpll_clk = {
-	.parent = &ckih_clk,
-	.get_rate = get_mpll_clk,
-};
-
-static unsigned long _clk_fclk_get_rate(struct clk *clk)
-{
-	unsigned long parent_rate;
-	u32 div;
-
-	div = (CSCR() & CCM_CSCR_PRESC_MASK) >> CCM_CSCR_PRESC_OFFSET;
-	parent_rate = clk_get_rate(clk->parent);
-
-	return parent_rate / (div+1);
-}
-
-static struct clk fclk_clk = {
-	.parent = &mpll_clk,
-	.get_rate = _clk_fclk_get_rate
-};
-
-static unsigned long get_spll_clk(struct clk *clk)
-{
-	uint32_t reg;
-	unsigned long ref_clk;
-	unsigned long mfi = 0, mfn = 0, mfd = 0, pdf = 0;
-	unsigned long long temp;
-
-	ref_clk = clk_get_rate(clk->parent);
-
-	reg = __raw_readl(CCM_SPCTL0);
-	pdf = (reg & CCM_SPCTL0_PD_MASK) >> CCM_SPCTL0_PD_OFFSET;
-	mfd = (reg & CCM_SPCTL0_MFD_MASK) >> CCM_SPCTL0_MFD_OFFSET;
-	mfi = (reg & CCM_SPCTL0_MFI_MASK) >> CCM_SPCTL0_MFI_OFFSET;
-	mfn = (reg & CCM_SPCTL0_MFN_MASK) >> CCM_SPCTL0_MFN_OFFSET;
-
-	mfi = (mfi <= 5) ? 5 : mfi;
-	temp = 2LL * ref_clk * mfn;
-	do_div(temp, mfd + 1);
-	temp = 2LL * ref_clk * mfi + temp;
-	do_div(temp, pdf + 1);
-
-	return (unsigned long)temp;
-}
-
-static struct clk spll_clk = {
-	.parent = &ckih_clk,
-	.get_rate = get_spll_clk,
-	.enable = _clk_spll_enable,
-	.disable = _clk_spll_disable,
-};
-
-static unsigned long get_hclk_clk(struct clk *clk)
-{
-	unsigned long rate;
-	unsigned long bclk_pdf;
-
-	bclk_pdf = (CSCR() & CCM_CSCR_BCLK_MASK)
-		>> CCM_CSCR_BCLK_OFFSET;
-
-	rate = clk_get_rate(clk->parent);
-	return rate / (bclk_pdf + 1);
-}
-
-static struct clk hclk_clk = {
-	.parent = &fclk_clk,
-	.get_rate = get_hclk_clk,
-};
-
-static unsigned long get_ipg_clk(struct clk *clk)
-{
-	unsigned long rate;
-	unsigned long ipg_pdf;
-
-	ipg_pdf = (CSCR() & CCM_CSCR_IPDIV) >> CCM_CSCR_IPDIV_OFFSET;
-
-	rate = clk_get_rate(clk->parent);
-	return rate / (ipg_pdf + 1);
-}
-
-static struct clk ipg_clk = {
-	.parent = &hclk_clk,
-	.get_rate = get_ipg_clk,
-};
-
-static unsigned long _clk_perclkx_recalc(struct clk *clk)
-{
-	unsigned long perclk_pdf;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	if (clk->id < 0 || clk->id > 3)
-		return 0;
-
-	perclk_pdf = (PCDR1() >> (clk->id << 3)) & CCM_PCDR1_PERDIV1_MASK;
-
-	return parent_rate / (perclk_pdf + 1);
-}
-
-static struct clk per_clk[] = {
-	{
-		.id = 0,
-		.parent = &mpll_clk,
-		.get_rate = _clk_perclkx_recalc,
-	}, {
-		.id = 1,
-		.parent = &mpll_clk,
-		.get_rate = _clk_perclkx_recalc,
-	}, {
-		.id = 2,
-		.parent = &mpll_clk,
-		.round_rate = _clk_perclkx_round_rate,
-		.set_rate = _clk_perclkx_set_rate,
-		.get_rate = _clk_perclkx_recalc,
-		/* Enable/Disable done via lcd_clkc[1] */
-	}, {
-		.id = 3,
-		.parent = &mpll_clk,
-		.round_rate = _clk_perclkx_round_rate,
-		.set_rate = _clk_perclkx_set_rate,
-		.get_rate = _clk_perclkx_recalc,
-		/* Enable/Disable done via csi_clk[1] */
-	},
-};
-
-static struct clk uart_ipg_clk[];
-
-static struct clk uart_clk[] = {
-	{
-		.id = 0,
-		.parent = &per_clk[0],
-		.secondary = &uart_ipg_clk[0],
-	}, {
-		.id = 1,
-		.parent = &per_clk[0],
-		.secondary = &uart_ipg_clk[1],
-	}, {
-		.id = 2,
-		.parent = &per_clk[0],
-		.secondary = &uart_ipg_clk[2],
-	}, {
-		.id = 3,
-		.parent = &per_clk[0],
-		.secondary = &uart_ipg_clk[3],
-	},
-};
-
-static struct clk uart_ipg_clk[] = {
-	{
-		.id = 0,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_UART1_REG,
-		.enable_shift = CCM_PCCR_UART1_OFFSET,
-		.disable = _clk_disable,
-	}, {
-		.id = 1,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_UART2_REG,
-		.enable_shift = CCM_PCCR_UART2_OFFSET,
-		.disable = _clk_disable,
-	}, {
-		.id = 2,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_UART3_REG,
-		.enable_shift = CCM_PCCR_UART3_OFFSET,
-		.disable = _clk_disable,
-	}, {
-		.id = 3,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_UART4_REG,
-		.enable_shift = CCM_PCCR_UART4_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-static struct clk gpt_ipg_clk[];
-
-static struct clk gpt_clk[] = {
-	{
-		.id = 0,
-		.parent = &per_clk[0],
-		.secondary = &gpt_ipg_clk[0],
-	}, {
-		.id = 1,
-		.parent = &per_clk[0],
-		.secondary = &gpt_ipg_clk[1],
-	}, {
-		.id = 2,
-		.parent = &per_clk[0],
-		.secondary = &gpt_ipg_clk[2],
-	},
-};
-
-static struct clk gpt_ipg_clk[] = {
-	{
-		.id = 0,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_GPT1_REG,
-		.enable_shift = CCM_PCCR_GPT1_OFFSET,
-		.disable = _clk_disable,
-	}, {
-		.id = 1,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_GPT2_REG,
-		.enable_shift = CCM_PCCR_GPT2_OFFSET,
-		.disable = _clk_disable,
-	}, {
-		.id = 2,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_GPT3_REG,
-		.enable_shift = CCM_PCCR_GPT3_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-static struct clk pwm_clk[] = {
-	{
-		.parent = &per_clk[0],
-		.secondary = &pwm_clk[1],
-	}, {
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_PWM_REG,
-		.enable_shift = CCM_PCCR_PWM_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-static struct clk sdhc_ipg_clk[];
-
-static struct clk sdhc_clk[] = {
-	{
-		.id = 0,
-		.parent = &per_clk[1],
-		.secondary = &sdhc_ipg_clk[0],
-	}, {
-		.id = 1,
-		.parent = &per_clk[1],
-		.secondary = &sdhc_ipg_clk[1],
-	},
-};
-
-static struct clk sdhc_ipg_clk[] = {
-	{
-		.id = 0,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_SDHC1_REG,
-		.enable_shift = CCM_PCCR_SDHC1_OFFSET,
-		.disable = _clk_disable,
-	}, {
-		.id = 1,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_SDHC2_REG,
-		.enable_shift = CCM_PCCR_SDHC2_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-static struct clk cspi_ipg_clk[];
-
-static struct clk cspi_clk[] = {
-	{
-		.id = 0,
-		.parent = &per_clk[1],
-		.secondary = &cspi_ipg_clk[0],
-	}, {
-		.id = 1,
-		.parent = &per_clk[1],
-		.secondary = &cspi_ipg_clk[1],
-	}, {
-		.id = 2,
-		.parent = &per_clk[1],
-		.secondary = &cspi_ipg_clk[2],
-	},
-};
-
-static struct clk cspi_ipg_clk[] = {
-	{
-		.id = 0,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_CSPI1_REG,
-		.enable_shift = CCM_PCCR_CSPI1_OFFSET,
-		.disable = _clk_disable,
-	}, {
-		.id = 1,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_CSPI2_REG,
-		.enable_shift = CCM_PCCR_CSPI2_OFFSET,
-		.disable = _clk_disable,
-	}, {
-		.id = 3,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_CSPI3_REG,
-		.enable_shift = CCM_PCCR_CSPI3_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-static struct clk lcdc_clk[] = {
-	{
-		.parent = &per_clk[2],
-		.secondary = &lcdc_clk[1],
-		.round_rate = _clk_parent_round_rate,
-		.set_rate = _clk_parent_set_rate,
-	}, {
-		.parent = &ipg_clk,
-		.secondary = &lcdc_clk[2],
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_LCDC_REG,
-		.enable_shift = CCM_PCCR_LCDC_OFFSET,
-		.disable = _clk_disable,
-	}, {
-		.parent = &hclk_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_HCLK_LCDC_REG,
-		.enable_shift = CCM_PCCR_HCLK_LCDC_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-static struct clk csi_clk[] = {
-	{
-		.parent = &per_clk[3],
-		.secondary = &csi_clk[1],
-		.round_rate = _clk_parent_round_rate,
-		.set_rate = _clk_parent_set_rate,
-	}, {
-		.parent = &hclk_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_HCLK_CSI_REG,
-		.enable_shift = CCM_PCCR_HCLK_CSI_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-static struct clk usb_clk[] = {
-	{
-		.parent = &spll_clk,
-		.secondary = &usb_clk[1],
-		.get_rate = _clk_usb_recalc,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_USBOTG_REG,
-		.enable_shift = CCM_PCCR_USBOTG_OFFSET,
-		.disable = _clk_disable,
-		.round_rate = _clk_usb_round_rate,
-		.set_rate = _clk_usb_set_rate,
-	}, {
-		.parent = &hclk_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_HCLK_USBOTG_REG,
-		.enable_shift = CCM_PCCR_HCLK_USBOTG_OFFSET,
-		.disable = _clk_disable,
-	}
-};
-
-static struct clk ssi_ipg_clk[];
-
-static struct clk ssi_clk[] = {
-	{
-		.id = 0,
-		.parent = &mpll_clk,
-		.secondary = &ssi_ipg_clk[0],
-		.get_rate = _clk_ssi1_recalc,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_SSI1_BAUD_REG,
-		.enable_shift = CCM_PCCR_SSI1_BAUD_OFFSET,
-		.disable = _clk_disable,
-	}, {
-		.id = 1,
-		.parent = &mpll_clk,
-		.secondary = &ssi_ipg_clk[1],
-		.get_rate = _clk_ssi2_recalc,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_SSI2_BAUD_REG,
-		.enable_shift = CCM_PCCR_SSI2_BAUD_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-static struct clk ssi_ipg_clk[] = {
-	{
-		.id = 0,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_SSI1_REG,
-		.enable_shift = CCM_PCCR_SSI1_IPG_OFFSET,
-		.disable = _clk_disable,
-	}, {
-		.id = 1,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_SSI2_REG,
-		.enable_shift = CCM_PCCR_SSI2_IPG_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-
-static struct clk nfc_clk = {
-	.parent = &fclk_clk,
-	.get_rate = _clk_nfc_recalc,
-	.enable = _clk_enable,
-	.enable_reg = CCM_PCCR_NFC_REG,
-	.enable_shift = CCM_PCCR_NFC_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk dma_clk[] = {
-	{
-		.parent = &hclk_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_DMA_REG,
-		.enable_shift = CCM_PCCR_DMA_OFFSET,
-		.disable = _clk_disable,
-		.secondary = &dma_clk[1],
-	},  {
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_HCLK_DMA_REG,
-		.enable_shift = CCM_PCCR_HCLK_DMA_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-static struct clk brom_clk = {
-	.parent = &hclk_clk,
-	.enable = _clk_enable,
-	.enable_reg = CCM_PCCR_HCLK_BROM_REG,
-	.enable_shift = CCM_PCCR_HCLK_BROM_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk emma_clk[] = {
-	{
-		.parent = &hclk_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_EMMA_REG,
-		.enable_shift = CCM_PCCR_EMMA_OFFSET,
-		.disable = _clk_disable,
-		.secondary = &emma_clk[1],
-	}, {
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_HCLK_EMMA_REG,
-		.enable_shift = CCM_PCCR_HCLK_EMMA_OFFSET,
-		.disable = _clk_disable,
-	}
-};
-
-static struct clk slcdc_clk[] = {
-	{
-		.parent = &hclk_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_SLCDC_REG,
-		.enable_shift = CCM_PCCR_SLCDC_OFFSET,
-		.disable = _clk_disable,
-		.secondary = &slcdc_clk[1],
-	}, {
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_HCLK_SLCDC_REG,
-		.enable_shift = CCM_PCCR_HCLK_SLCDC_OFFSET,
-		.disable = _clk_disable,
-	}
-};
-
-static struct clk wdog_clk = {
-	.parent = &ipg_clk,
-	.enable = _clk_enable,
-	.enable_reg = CCM_PCCR_WDT_REG,
-	.enable_shift = CCM_PCCR_WDT_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk gpio_clk = {
-	.parent = &ipg_clk,
-	.enable = _clk_enable,
-	.enable_reg = CCM_PCCR_GPIO_REG,
-	.enable_shift = CCM_PCCR_GPIO_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk i2c_clk = {
-	.id = 0,
-	.parent = &ipg_clk,
-	.enable = _clk_enable,
-	.enable_reg = CCM_PCCR_I2C1_REG,
-	.enable_shift = CCM_PCCR_I2C1_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk kpp_clk = {
-	.parent = &ipg_clk,
-	.enable = _clk_enable,
-	.enable_reg = CCM_PCCR_KPP_REG,
-	.enable_shift = CCM_PCCR_KPP_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk owire_clk = {
-	.parent = &ipg_clk,
-	.enable = _clk_enable,
-	.enable_reg = CCM_PCCR_OWIRE_REG,
-	.enable_shift = CCM_PCCR_OWIRE_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk rtc_clk = {
-	.parent = &ipg_clk,
-	.enable = _clk_enable,
-	.enable_reg = CCM_PCCR_RTC_REG,
-	.enable_shift = CCM_PCCR_RTC_OFFSET,
-	.disable = _clk_disable,
-};
-
-static unsigned long _clk_clko_round_rate(struct clk *clk, unsigned long rate)
-{
-	return _clk_generic_round_rate(clk, rate, 8);
-}
-
-static int _clk_clko_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 reg;
-	u32 div;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	div = parent_rate / rate;
-
-	if (div > 8 || div < 1 || ((parent_rate / div) != rate))
-		return -EINVAL;
-	div--;
-
-	reg = __raw_readl(CCM_PCDR0);
-
-	if (clk->parent == &usb_clk[0]) {
-		reg &= ~CCM_PCDR0_48MDIV_MASK;
-		reg |= div << CCM_PCDR0_48MDIV_OFFSET;
-	}
-	__raw_writel(reg, CCM_PCDR0);
-
-	return 0;
-}
-
-static unsigned long _clk_clko_recalc(struct clk *clk)
-{
-	u32 div = 0;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	if (clk->parent == &usb_clk[0]) /* 48M */
-		div = __raw_readl(CCM_PCDR0) & CCM_PCDR0_48MDIV_MASK
-			 >> CCM_PCDR0_48MDIV_OFFSET;
-	div++;
-
-	return parent_rate / div;
-}
-
-static struct clk clko_clk;
-
-static int _clk_clko_set_parent(struct clk *clk, struct clk *parent)
-{
-	u32 reg;
-
-	reg = __raw_readl(CCM_CCSR) & ~CCM_CCSR_CLKOSEL_MASK;
-
-	if (parent == &ckil_clk)
-		reg |= 0 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &fpm_clk)
-		reg |= 1 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &ckih_clk)
-		reg |= 2 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == mpll_clk.parent)
-		reg |= 3 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == spll_clk.parent)
-		reg |= 4 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &mpll_clk)
-		reg |= 5 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &spll_clk)
-		reg |= 6 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &fclk_clk)
-		reg |= 7 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &hclk_clk)
-		reg |= 8 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &ipg_clk)
-		reg |= 9 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &per_clk[0])
-		reg |= 0xA << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &per_clk[1])
-		reg |= 0xB << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &per_clk[2])
-		reg |= 0xC << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &per_clk[3])
-		reg |= 0xD << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &ssi_clk[0])
-		reg |= 0xE << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &ssi_clk[1])
-		reg |= 0xF << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &nfc_clk)
-		reg |= 0x10 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &usb_clk[0])
-		reg |= 0x14 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &clko_clk)
-		reg |= 0x15 << CCM_CCSR_CLKOSEL_OFFSET;
-	else
-		return -EINVAL;
-
-	__raw_writel(reg, CCM_CCSR);
-
-	return 0;
-}
-
-static struct clk clko_clk = {
-	.get_rate = _clk_clko_recalc,
-	.set_rate = _clk_clko_set_rate,
-	.round_rate = _clk_clko_round_rate,
-	.set_parent = _clk_clko_set_parent,
-};
-
-
-#define _REGISTER_CLOCK(d, n, c) \
-	{ \
-		.dev_id = d, \
-		.con_id = n, \
-		.clk = &c, \
-	},
-static struct clk_lookup lookups[] = {
-/* It's unlikely that any driver wants one of them directly:
-	_REGISTER_CLOCK(NULL, "ckih", ckih_clk)
-	_REGISTER_CLOCK(NULL, "ckil", ckil_clk)
-	_REGISTER_CLOCK(NULL, "fpm", fpm_clk)
-	_REGISTER_CLOCK(NULL, "mpll", mpll_clk)
-	_REGISTER_CLOCK(NULL, "spll", spll_clk)
-	_REGISTER_CLOCK(NULL, "fclk", fclk_clk)
-	_REGISTER_CLOCK(NULL, "hclk", hclk_clk)
-	_REGISTER_CLOCK(NULL, "ipg", ipg_clk)
-*/
-	_REGISTER_CLOCK(NULL, "perclk1", per_clk[0])
-	_REGISTER_CLOCK(NULL, "perclk2", per_clk[1])
-	_REGISTER_CLOCK(NULL, "perclk3", per_clk[2])
-	_REGISTER_CLOCK(NULL, "perclk4", per_clk[3])
-	_REGISTER_CLOCK(NULL, "clko", clko_clk)
-	_REGISTER_CLOCK("imx21-uart.0", NULL, uart_clk[0])
-	_REGISTER_CLOCK("imx21-uart.1", NULL, uart_clk[1])
-	_REGISTER_CLOCK("imx21-uart.2", NULL, uart_clk[2])
-	_REGISTER_CLOCK("imx21-uart.3", NULL, uart_clk[3])
-	_REGISTER_CLOCK(NULL, "gpt1", gpt_clk[0])
-	_REGISTER_CLOCK(NULL, "gpt1", gpt_clk[1])
-	_REGISTER_CLOCK(NULL, "gpt1", gpt_clk[2])
-	_REGISTER_CLOCK(NULL, "pwm", pwm_clk[0])
-	_REGISTER_CLOCK(NULL, "sdhc1", sdhc_clk[0])
-	_REGISTER_CLOCK(NULL, "sdhc2", sdhc_clk[1])
-	_REGISTER_CLOCK("imx21-cspi.0", NULL, cspi_clk[0])
-	_REGISTER_CLOCK("imx21-cspi.1", NULL, cspi_clk[1])
-	_REGISTER_CLOCK("imx21-cspi.2", NULL, cspi_clk[2])
-	_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk[0])
-	_REGISTER_CLOCK(NULL, "csi", csi_clk[0])
-	_REGISTER_CLOCK("imx21-hcd.0", NULL, usb_clk[0])
-	_REGISTER_CLOCK(NULL, "ssi1", ssi_clk[0])
-	_REGISTER_CLOCK(NULL, "ssi2", ssi_clk[1])
-	_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
-	_REGISTER_CLOCK(NULL, "dma", dma_clk[0])
-	_REGISTER_CLOCK(NULL, "brom", brom_clk)
-	_REGISTER_CLOCK(NULL, "emma", emma_clk[0])
-	_REGISTER_CLOCK(NULL, "slcdc", slcdc_clk[0])
-	_REGISTER_CLOCK("imx2-wdt.0", NULL, wdog_clk)
-	_REGISTER_CLOCK(NULL, "gpio", gpio_clk)
-	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
-	_REGISTER_CLOCK("mxc-keypad", NULL, kpp_clk)
-	_REGISTER_CLOCK(NULL, "owire", owire_clk)
-	_REGISTER_CLOCK(NULL, "rtc", rtc_clk)
-};
-
-/*
- * must be called very early to get information about the
- * available clock rate when the timer framework starts
- */
-int __init mx21_clocks_init(unsigned long lref, unsigned long href)
-{
-	u32 cscr;
-
-	external_low_reference = lref;
-	external_high_reference = href;
-
-	/* detect clock reference for both system PLL */
-	cscr = CSCR();
-	if (cscr & CCM_CSCR_MCU)
-		mpll_clk.parent = &ckih_clk;
-	else
-		mpll_clk.parent = &fpm_clk;
-
-	if (cscr & CCM_CSCR_SP)
-		spll_clk.parent = &ckih_clk;
-	else
-		spll_clk.parent = &fpm_clk;
-
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
-	/* Turn off all clock gates */
-	__raw_writel(0, CCM_PCCR0);
-	__raw_writel(CCM_PCCR_GPT1_MASK, CCM_PCCR1);
-
-	/* This turns of the serial PLL as well */
-	spll_clk.disable(&spll_clk);
-
-	/* This will propagate to all children and init all the clock rates. */
-	clk_enable(&per_clk[0]);
-	clk_enable(&gpio_clk);
-
-#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
-	clk_enable(&uart_clk[0]);
-#endif
-
-	mxc_timer_init(&gpt_clk[0], MX21_IO_ADDRESS(MX21_GPT1_BASE_ADDR),
-			MX21_INT_GPT1);
-	return 0;
-}
diff --git a/arch/arm/mach-imx/clock-imx25.c b/arch/arm/mach-imx/clock-imx25.c
deleted file mode 100644
index b0fec74c8c91..000000000000
--- a/arch/arm/mach-imx/clock-imx25.c
+++ /dev/null
@@ -1,346 +0,0 @@
-/*
- * Copyright (C) 2009 by Sascha Hauer, Pengutronix
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-
-#include <mach/clock.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/mx25.h>
-
-#define CRM_BASE	MX25_IO_ADDRESS(MX25_CRM_BASE_ADDR)
-
-#define CCM_MPCTL	0x00
-#define CCM_UPCTL	0x04
-#define CCM_CCTL	0x08
-#define CCM_CGCR0	0x0C
-#define CCM_CGCR1	0x10
-#define CCM_CGCR2	0x14
-#define CCM_PCDR0	0x18
-#define CCM_PCDR1	0x1C
-#define CCM_PCDR2	0x20
-#define CCM_PCDR3	0x24
-#define CCM_RCSR	0x28
-#define CCM_CRDR	0x2C
-#define CCM_DCVR0	0x30
-#define CCM_DCVR1	0x34
-#define CCM_DCVR2	0x38
-#define CCM_DCVR3	0x3c
-#define CCM_LTR0	0x40
-#define CCM_LTR1	0x44
-#define CCM_LTR2	0x48
-#define CCM_LTR3	0x4c
-
-static unsigned long get_rate_mpll(void)
-{
-	ulong mpctl = __raw_readl(CRM_BASE + CCM_MPCTL);
-
-	return mxc_decode_pll(mpctl, 24000000);
-}
-
-static unsigned long get_rate_upll(void)
-{
-	ulong mpctl = __raw_readl(CRM_BASE + CCM_UPCTL);
-
-	return mxc_decode_pll(mpctl, 24000000);
-}
-
-unsigned long get_rate_arm(struct clk *clk)
-{
-	unsigned long cctl = readl(CRM_BASE + CCM_CCTL);
-	unsigned long rate = get_rate_mpll();
-
-	if (cctl & (1 << 14))
-		rate = (rate * 3) >> 2;
-
-	return rate / ((cctl >> 30) + 1);
-}
-
-static unsigned long get_rate_ahb(struct clk *clk)
-{
-	unsigned long cctl = readl(CRM_BASE + CCM_CCTL);
-
-	return get_rate_arm(NULL) / (((cctl >> 28) & 0x3) + 1);
-}
-
-static unsigned long get_rate_ipg(struct clk *clk)
-{
-	return get_rate_ahb(NULL) >> 1;
-}
-
-static unsigned long get_rate_per(int per)
-{
-	unsigned long ofs = (per & 0x3) * 8;
-	unsigned long reg = per & ~0x3;
-	unsigned long val = (readl(CRM_BASE + CCM_PCDR0 + reg) >> ofs) & 0x3f;
-	unsigned long fref;
-
-	if (readl(CRM_BASE + 0x64) & (1 << per))
-		fref = get_rate_upll();
-	else
-		fref = get_rate_ahb(NULL);
-
-	return fref / (val + 1);
-}
-
-static unsigned long get_rate_uart(struct clk *clk)
-{
-	return get_rate_per(15);
-}
-
-static unsigned long get_rate_ssi2(struct clk *clk)
-{
-	return get_rate_per(14);
-}
-
-static unsigned long get_rate_ssi1(struct clk *clk)
-{
-	return get_rate_per(13);
-}
-
-static unsigned long get_rate_i2c(struct clk *clk)
-{
-	return get_rate_per(6);
-}
-
-static unsigned long get_rate_nfc(struct clk *clk)
-{
-	return get_rate_per(8);
-}
-
-static unsigned long get_rate_gpt(struct clk *clk)
-{
-	return get_rate_per(5);
-}
-
-static unsigned long get_rate_lcdc(struct clk *clk)
-{
-	return get_rate_per(7);
-}
-
-static unsigned long get_rate_esdhc1(struct clk *clk)
-{
-	return get_rate_per(3);
-}
-
-static unsigned long get_rate_esdhc2(struct clk *clk)
-{
-	return get_rate_per(4);
-}
-
-static unsigned long get_rate_csi(struct clk *clk)
-{
-	return get_rate_per(0);
-}
-
-static unsigned long get_rate_otg(struct clk *clk)
-{
-	unsigned long cctl = readl(CRM_BASE + CCM_CCTL);
-	unsigned long rate = get_rate_upll();
-
-	return (cctl & (1 << 23)) ? 0 : rate / ((0x3F & (cctl >> 16)) + 1);
-}
-
-static int clk_cgcr_enable(struct clk *clk)
-{
-	u32 reg;
-
-	reg = __raw_readl(clk->enable_reg);
-	reg |= 1 << clk->enable_shift;
-	__raw_writel(reg, clk->enable_reg);
-
-	return 0;
-}
-
-static void clk_cgcr_disable(struct clk *clk)
-{
-	u32 reg;
-
-	reg = __raw_readl(clk->enable_reg);
-	reg &= ~(1 << clk->enable_shift);
-	__raw_writel(reg, clk->enable_reg);
-}
-
-#define DEFINE_CLOCK(name, i, er, es, gr, sr, s)	\
-	static struct clk name = {			\
-		.id		= i,			\
-		.enable_reg	= CRM_BASE + er,	\
-		.enable_shift	= es,			\
-		.get_rate	= gr,			\
-		.set_rate	= sr,			\
-		.enable		= clk_cgcr_enable,	\
-		.disable	= clk_cgcr_disable,	\
-		.secondary	= s,			\
-	}
-
-/*
- * Note: the following IPG clock gating bits are wrongly marked "Reserved" in
- * the i.MX25 Reference Manual Rev 1, table 15-13. The information below is
- * taken from the Freescale released BSP.
- *
- * bit	reg	offset	clock
- *
- * 0	CGCR1	0	AUDMUX
- * 12	CGCR1	12	ESAI
- * 16	CGCR1	16	GPIO1
- * 17	CGCR1	17	GPIO2
- * 18	CGCR1	18	GPIO3
- * 23	CGCR1	23	I2C1
- * 24	CGCR1	24	I2C2
- * 25	CGCR1	25	I2C3
- * 27	CGCR1	27	IOMUXC
- * 28	CGCR1	28	KPP
- * 30	CGCR1	30	OWIRE
- * 36	CGCR2	4	RTIC
- * 51	CGCR2	19	WDOG
- */
-
-DEFINE_CLOCK(gpt_clk,    0, CCM_CGCR0,  5, get_rate_gpt, NULL, NULL);
-DEFINE_CLOCK(uart_per_clk, 0, CCM_CGCR0, 15, get_rate_uart, NULL, NULL);
-DEFINE_CLOCK(ssi1_per_clk, 0, CCM_CGCR0, 13, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(ssi2_per_clk, 0, CCM_CGCR0, 14, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(cspi1_clk,  0, CCM_CGCR1,  5, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(cspi2_clk,  0, CCM_CGCR1,  6, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(cspi3_clk,  0, CCM_CGCR1,  7, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(esdhc1_ahb_clk, 0, CCM_CGCR0, 21, get_rate_esdhc1,	 NULL, NULL);
-DEFINE_CLOCK(esdhc1_per_clk, 0, CCM_CGCR0,  3, get_rate_esdhc1,	 NULL,
-		&esdhc1_ahb_clk);
-DEFINE_CLOCK(esdhc2_ahb_clk, 0, CCM_CGCR0, 22, get_rate_esdhc2,	 NULL, NULL);
-DEFINE_CLOCK(esdhc2_per_clk, 0, CCM_CGCR0,  4, get_rate_esdhc2,	 NULL,
-		&esdhc2_ahb_clk);
-DEFINE_CLOCK(sdma_ahb_clk, 0, CCM_CGCR0, 26, NULL,	 NULL, NULL);
-DEFINE_CLOCK(fec_ahb_clk, 0, CCM_CGCR0, 23, NULL,	 NULL, NULL);
-DEFINE_CLOCK(lcdc_ahb_clk, 0, CCM_CGCR0, 24, NULL,	 NULL, NULL);
-DEFINE_CLOCK(lcdc_per_clk, 0, CCM_CGCR0,  7, NULL,	 NULL, &lcdc_ahb_clk);
-DEFINE_CLOCK(csi_ahb_clk, 0, CCM_CGCR0, 18, get_rate_csi, NULL, NULL);
-DEFINE_CLOCK(csi_per_clk, 0, CCM_CGCR0, 0, get_rate_csi, NULL, &csi_ahb_clk);
-DEFINE_CLOCK(uart1_clk,  0, CCM_CGCR2, 14, get_rate_uart, NULL, &uart_per_clk);
-DEFINE_CLOCK(uart2_clk,  0, CCM_CGCR2, 15, get_rate_uart, NULL, &uart_per_clk);
-DEFINE_CLOCK(uart3_clk,  0, CCM_CGCR2, 16, get_rate_uart, NULL, &uart_per_clk);
-DEFINE_CLOCK(uart4_clk,  0, CCM_CGCR2, 17, get_rate_uart, NULL, &uart_per_clk);
-DEFINE_CLOCK(uart5_clk,  0, CCM_CGCR2, 18, get_rate_uart, NULL, &uart_per_clk);
-DEFINE_CLOCK(nfc_clk,    0, CCM_CGCR0,  8, get_rate_nfc, NULL, NULL);
-DEFINE_CLOCK(usbotg_clk, 0, CCM_CGCR0, 28, get_rate_otg, NULL, NULL);
-DEFINE_CLOCK(pwm1_clk,	 0, CCM_CGCR1, 31, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(pwm2_clk,	 0, CCM_CGCR2,  0, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(pwm3_clk,	 0, CCM_CGCR2,  1, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(pwm4_clk,	 0, CCM_CGCR2,  2, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(kpp_clk,	 0, CCM_CGCR1, 28, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(tsc_clk,	 0, CCM_CGCR2, 13, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(i2c_clk,	 0, CCM_CGCR0,  6, get_rate_i2c, NULL, NULL);
-DEFINE_CLOCK(fec_clk,	 0, CCM_CGCR1, 15, get_rate_ipg, NULL, &fec_ahb_clk);
-DEFINE_CLOCK(dryice_clk, 0, CCM_CGCR1,  8, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(lcdc_clk,	 0, CCM_CGCR1, 29, get_rate_lcdc, NULL, &lcdc_per_clk);
-DEFINE_CLOCK(wdt_clk,    0, CCM_CGCR2, 19, get_rate_ipg, NULL,  NULL);
-DEFINE_CLOCK(ssi1_clk,  0, CCM_CGCR2, 11, get_rate_ssi1, NULL, &ssi1_per_clk);
-DEFINE_CLOCK(ssi2_clk,  1, CCM_CGCR2, 12, get_rate_ssi2, NULL, &ssi2_per_clk);
-DEFINE_CLOCK(sdma_clk, 0, CCM_CGCR2,  6, get_rate_ipg, NULL, &sdma_ahb_clk);
-DEFINE_CLOCK(esdhc1_clk,  0, CCM_CGCR1, 13, get_rate_esdhc1, NULL,
-		&esdhc1_per_clk);
-DEFINE_CLOCK(esdhc2_clk,  1, CCM_CGCR1, 14, get_rate_esdhc2, NULL,
-		&esdhc2_per_clk);
-DEFINE_CLOCK(audmux_clk, 0, CCM_CGCR1, 0, NULL, NULL, NULL);
-DEFINE_CLOCK(csi_clk,    0, CCM_CGCR1,  4, get_rate_csi, NULL,  &csi_per_clk);
-DEFINE_CLOCK(can1_clk,	 0, CCM_CGCR1,  2, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(can2_clk,	 1, CCM_CGCR1,  3, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(iim_clk,    0, CCM_CGCR1, 26, NULL, NULL, NULL);
-
-#define _REGISTER_CLOCK(d, n, c)	\
-	{				\
-		.dev_id = d,		\
-		.con_id = n,		\
-		.clk = &c,		\
-	},
-
-static struct clk_lookup lookups[] = {
-	/* i.mx25 has the i.mx21 type uart */
-	_REGISTER_CLOCK("imx21-uart.0", NULL, uart1_clk)
-	_REGISTER_CLOCK("imx21-uart.1", NULL, uart2_clk)
-	_REGISTER_CLOCK("imx21-uart.2", NULL, uart3_clk)
-	_REGISTER_CLOCK("imx21-uart.3", NULL, uart4_clk)
-	_REGISTER_CLOCK("imx21-uart.4", NULL, uart5_clk)
-	_REGISTER_CLOCK("mxc-ehci.0", "usb", usbotg_clk)
-	_REGISTER_CLOCK("mxc-ehci.1", "usb", usbotg_clk)
-	_REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk)
-	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk)
-	_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
-	/* i.mx25 has the i.mx35 type cspi */
-	_REGISTER_CLOCK("imx35-cspi.0", NULL, cspi1_clk)
-	_REGISTER_CLOCK("imx35-cspi.1", NULL, cspi2_clk)
-	_REGISTER_CLOCK("imx35-cspi.2", NULL, cspi3_clk)
-	_REGISTER_CLOCK("mxc_pwm.0", NULL, pwm1_clk)
-	_REGISTER_CLOCK("mxc_pwm.1", NULL, pwm2_clk)
-	_REGISTER_CLOCK("mxc_pwm.2", NULL, pwm3_clk)
-	_REGISTER_CLOCK("mxc_pwm.3", NULL, pwm4_clk)
-	_REGISTER_CLOCK("imx-keypad", NULL, kpp_clk)
-	_REGISTER_CLOCK("mx25-adc", NULL, tsc_clk)
-	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
-	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c_clk)
-	_REGISTER_CLOCK("imx-i2c.2", NULL, i2c_clk)
-	_REGISTER_CLOCK("imx25-fec.0", NULL, fec_clk)
-	_REGISTER_CLOCK("imxdi_rtc.0", NULL, dryice_clk)
-	_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
-	_REGISTER_CLOCK("imx2-wdt.0", NULL, wdt_clk)
-	_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
-	_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
-	_REGISTER_CLOCK("sdhci-esdhc-imx25.0", NULL, esdhc1_clk)
-	_REGISTER_CLOCK("sdhci-esdhc-imx25.1", NULL, esdhc2_clk)
-	_REGISTER_CLOCK("mx2-camera.0", NULL, csi_clk)
-	_REGISTER_CLOCK(NULL, "audmux", audmux_clk)
-	_REGISTER_CLOCK("flexcan.0", NULL, can1_clk)
-	_REGISTER_CLOCK("flexcan.1", NULL, can2_clk)
-	/* i.mx25 has the i.mx35 type sdma */
-	_REGISTER_CLOCK("imx35-sdma", NULL, sdma_clk)
-	_REGISTER_CLOCK(NULL, "iim", iim_clk)
-};
-
-int __init mx25_clocks_init(void)
-{
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
-	/* Turn off all clocks except the ones we need to survive, namely:
-	 * EMI, GPIO1-3 (CCM_CGCR1[18:16]), GPT1, IOMUXC (CCM_CGCR1[27]), IIM,
-	 * SCC
-	 */
-	__raw_writel((1 << 19), CRM_BASE + CCM_CGCR0);
-	__raw_writel((0xf << 16) | (3 << 26), CRM_BASE + CCM_CGCR1);
-	__raw_writel((1 << 5), CRM_BASE + CCM_CGCR2);
-#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
-	clk_enable(&uart1_clk);
-#endif
-
-	/* Clock source for lcdc and csi is upll */
-	__raw_writel(__raw_readl(CRM_BASE+0x64) | (1 << 7) | (1 << 0),
-			CRM_BASE + 0x64);
-
-	/* Clock source for gpt is ahb_div */
-	__raw_writel(__raw_readl(CRM_BASE+0x64) & ~(1 << 5), CRM_BASE + 0x64);
-
-	clk_enable(&iim_clk);
-	imx_print_silicon_rev("i.MX25", mx25_revision());
-	clk_disable(&iim_clk);
-
-	mxc_timer_init(&gpt_clk, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
-
-	return 0;
-}
diff --git a/arch/arm/mach-imx/clock-imx27.c b/arch/arm/mach-imx/clock-imx27.c
deleted file mode 100644
index b9a95ed75553..000000000000
--- a/arch/arm/mach-imx/clock-imx27.c
+++ /dev/null
@@ -1,784 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- * Copyright 2008 Martin Fuzzey, mfuzzey@gmail.com
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/clkdev.h>
-#include <linux/of.h>
-
-#include <asm/div64.h>
-
-#include <mach/clock.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-
-#define IO_ADDR_CCM(off)	(MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR + (off)))
-
-/* Register offsets */
-#define CCM_CSCR		IO_ADDR_CCM(0x0)
-#define CCM_MPCTL0		IO_ADDR_CCM(0x4)
-#define CCM_MPCTL1		IO_ADDR_CCM(0x8)
-#define CCM_SPCTL0		IO_ADDR_CCM(0xc)
-#define CCM_SPCTL1		IO_ADDR_CCM(0x10)
-#define CCM_OSC26MCTL		IO_ADDR_CCM(0x14)
-#define CCM_PCDR0		IO_ADDR_CCM(0x18)
-#define CCM_PCDR1		IO_ADDR_CCM(0x1c)
-#define CCM_PCCR0		IO_ADDR_CCM(0x20)
-#define CCM_PCCR1		IO_ADDR_CCM(0x24)
-#define CCM_CCSR		IO_ADDR_CCM(0x28)
-#define CCM_PMCTL		IO_ADDR_CCM(0x2c)
-#define CCM_PMCOUNT		IO_ADDR_CCM(0x30)
-#define CCM_WKGDCTL		IO_ADDR_CCM(0x34)
-
-#define CCM_CSCR_UPDATE_DIS	(1 << 31)
-#define CCM_CSCR_SSI2		(1 << 23)
-#define CCM_CSCR_SSI1		(1 << 22)
-#define CCM_CSCR_VPU		(1 << 21)
-#define CCM_CSCR_MSHC           (1 << 20)
-#define CCM_CSCR_SPLLRES        (1 << 19)
-#define CCM_CSCR_MPLLRES        (1 << 18)
-#define CCM_CSCR_SP             (1 << 17)
-#define CCM_CSCR_MCU            (1 << 16)
-#define CCM_CSCR_OSC26MDIV      (1 << 4)
-#define CCM_CSCR_OSC26M         (1 << 3)
-#define CCM_CSCR_FPM            (1 << 2)
-#define CCM_CSCR_SPEN           (1 << 1)
-#define CCM_CSCR_MPEN           (1 << 0)
-
-/* i.MX27 TO 2+ */
-#define CCM_CSCR_ARM_SRC        (1 << 15)
-
-#define CCM_SPCTL1_LF           (1 << 15)
-#define CCM_SPCTL1_BRMO         (1 << 6)
-
-static struct clk mpll_main1_clk, mpll_main2_clk;
-
-static int clk_pccr_enable(struct clk *clk)
-{
-	unsigned long reg;
-
-	if (!clk->enable_reg)
-		return 0;
-
-	reg = __raw_readl(clk->enable_reg);
-	reg |= 1 << clk->enable_shift;
-	__raw_writel(reg, clk->enable_reg);
-
-	return 0;
-}
-
-static void clk_pccr_disable(struct clk *clk)
-{
-	unsigned long reg;
-
-	if (!clk->enable_reg)
-		return;
-
-	reg = __raw_readl(clk->enable_reg);
-	reg &= ~(1 << clk->enable_shift);
-	__raw_writel(reg, clk->enable_reg);
-}
-
-static int clk_spll_enable(struct clk *clk)
-{
-	unsigned long reg;
-
-	reg = __raw_readl(CCM_CSCR);
-	reg |= CCM_CSCR_SPEN;
-	__raw_writel(reg, CCM_CSCR);
-
-	while (!(__raw_readl(CCM_SPCTL1) & CCM_SPCTL1_LF));
-
-	return 0;
-}
-
-static void clk_spll_disable(struct clk *clk)
-{
-	unsigned long reg;
-
-	reg = __raw_readl(CCM_CSCR);
-	reg &= ~CCM_CSCR_SPEN;
-	__raw_writel(reg, CCM_CSCR);
-}
-
-static int clk_cpu_set_parent(struct clk *clk, struct clk *parent)
-{
-	int cscr = __raw_readl(CCM_CSCR);
-
-	if (clk->parent == parent)
-		return 0;
-
-	if (mx27_revision() >= IMX_CHIP_REVISION_2_0) {
-		if (parent == &mpll_main1_clk) {
-			cscr |= CCM_CSCR_ARM_SRC;
-		} else {
-			if (parent == &mpll_main2_clk)
-				cscr &= ~CCM_CSCR_ARM_SRC;
-			else
-				return -EINVAL;
-		}
-		__raw_writel(cscr, CCM_CSCR);
-		clk->parent = parent;
-		return 0;
-	}
-	return -ENODEV;
-}
-
-static unsigned long round_rate_cpu(struct clk *clk, unsigned long rate)
-{
-	int div;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	div = parent_rate / rate;
-	if (parent_rate % rate)
-		div++;
-
-	if (div > 4)
-		div = 4;
-
-	return parent_rate / div;
-}
-
-static int set_rate_cpu(struct clk *clk, unsigned long rate)
-{
-	unsigned int div;
-	uint32_t reg;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	div = parent_rate / rate;
-
-	if (div > 4 || div < 1 || ((parent_rate / div) != rate))
-		return -EINVAL;
-
-	div--;
-
-	reg = __raw_readl(CCM_CSCR);
-	if (mx27_revision() >= IMX_CHIP_REVISION_2_0) {
-		reg &= ~(3 << 12);
-		reg |= div << 12;
-		reg &= ~(CCM_CSCR_FPM | CCM_CSCR_SPEN);
-		__raw_writel(reg | CCM_CSCR_UPDATE_DIS, CCM_CSCR);
-	} else {
-		printk(KERN_ERR "Can't set CPU frequency!\n");
-	}
-
-	return 0;
-}
-
-static unsigned long round_rate_per(struct clk *clk, unsigned long rate)
-{
-	u32 div;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	div = parent_rate / rate;
-	if (parent_rate % rate)
-		div++;
-
-	if (div > 64)
-		div = 64;
-
-	return parent_rate / div;
-}
-
-static int set_rate_per(struct clk *clk, unsigned long rate)
-{
-	u32 reg;
-	u32 div;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	if (clk->id < 0 || clk->id > 3)
-		return -EINVAL;
-
-	div = parent_rate / rate;
-	if (div > 64 || div < 1 || ((parent_rate / div) != rate))
-		return -EINVAL;
-	div--;
-
-	reg = __raw_readl(CCM_PCDR1) & ~(0x3f << (clk->id << 3));
-	reg |= div << (clk->id << 3);
-	__raw_writel(reg, CCM_PCDR1);
-
-	return 0;
-}
-
-static unsigned long get_rate_usb(struct clk *clk)
-{
-	unsigned long usb_pdf;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	usb_pdf = (__raw_readl(CCM_CSCR) >> 28) & 0x7;
-
-	return parent_rate / (usb_pdf + 1U);
-}
-
-static unsigned long get_rate_ssix(struct clk *clk, unsigned long pdf)
-{
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	if (mx27_revision() >= IMX_CHIP_REVISION_2_0)
-		pdf += 4;  /* MX27 TO2+ */
-	else
-		pdf = (pdf < 2) ? 124UL : pdf;  /* MX21 & MX27 TO1 */
-
-	return 2UL * parent_rate / pdf;
-}
-
-static unsigned long get_rate_ssi1(struct clk *clk)
-{
-	return get_rate_ssix(clk, (__raw_readl(CCM_PCDR0) >> 16) & 0x3f);
-}
-
-static unsigned long get_rate_ssi2(struct clk *clk)
-{
-	return get_rate_ssix(clk, (__raw_readl(CCM_PCDR0) >> 26) & 0x3f);
-}
-
-static unsigned long get_rate_nfc(struct clk *clk)
-{
-	unsigned long nfc_pdf;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	if (mx27_revision() >= IMX_CHIP_REVISION_2_0)
-		nfc_pdf = (__raw_readl(CCM_PCDR0) >> 6) & 0xf;
-	else
-		nfc_pdf = (__raw_readl(CCM_PCDR0) >> 12) & 0xf;
-
-	return parent_rate / (nfc_pdf + 1);
-}
-
-static unsigned long get_rate_vpu(struct clk *clk)
-{
-	unsigned long vpu_pdf;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	if (mx27_revision() >= IMX_CHIP_REVISION_2_0) {
-		vpu_pdf = (__raw_readl(CCM_PCDR0) >> 10) & 0x3f;
-		vpu_pdf += 4;
-	} else {
-		vpu_pdf = (__raw_readl(CCM_PCDR0) >> 8) & 0xf;
-		vpu_pdf = (vpu_pdf < 2) ? 124 : vpu_pdf;
-	}
-
-	return 2UL * parent_rate / vpu_pdf;
-}
-
-static unsigned long round_rate_parent(struct clk *clk, unsigned long rate)
-{
-	return clk->parent->round_rate(clk->parent, rate);
-}
-
-static unsigned long get_rate_parent(struct clk *clk)
-{
-	return clk_get_rate(clk->parent);
-}
-
-static int set_rate_parent(struct clk *clk, unsigned long rate)
-{
-	return clk->parent->set_rate(clk->parent, rate);
-}
-
-/* in Hz */
-static unsigned long external_high_reference = 26000000;
-
-static unsigned long get_rate_high_reference(struct clk *clk)
-{
-	return external_high_reference;
-}
-
-/* in Hz */
-static unsigned long external_low_reference = 32768;
-
-static unsigned long get_rate_low_reference(struct clk *clk)
-{
-	return external_low_reference;
-}
-
-static unsigned long get_rate_fpm(struct clk *clk)
-{
-	return clk_get_rate(clk->parent) * 1024;
-}
-
-static unsigned long get_rate_mpll(struct clk *clk)
-{
-	return mxc_decode_pll(__raw_readl(CCM_MPCTL0),
-			clk_get_rate(clk->parent));
-}
-
-static unsigned long get_rate_mpll_main(struct clk *clk)
-{
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	/* i.MX27 TO2:
-	 * clk->id == 0: arm clock source path 1 which is from 2 * MPLL / 2
-	 * clk->id == 1: arm clock source path 2 which is from 2 * MPLL / 3
-	 */
-	if (mx27_revision() >= IMX_CHIP_REVISION_2_0 && clk->id == 1)
-		return 2UL * parent_rate / 3UL;
-
-	return parent_rate;
-}
-
-static unsigned long get_rate_spll(struct clk *clk)
-{
-	uint32_t reg;
-	unsigned long rate;
-
-	rate = clk_get_rate(clk->parent);
-
-	reg = __raw_readl(CCM_SPCTL0);
-
-	/* On TO2 we have to write the value back. Otherwise we
-	 * read 0 from this register the next time.
-	 */
-	if (mx27_revision() >= IMX_CHIP_REVISION_2_0)
-		__raw_writel(reg, CCM_SPCTL0);
-
-	return mxc_decode_pll(reg, rate);
-}
-
-static unsigned long get_rate_cpu(struct clk *clk)
-{
-	u32 div;
-	unsigned long rate;
-
-	if (mx27_revision() >= IMX_CHIP_REVISION_2_0)
-		div = (__raw_readl(CCM_CSCR) >> 12) & 0x3;
-	else
-		div = (__raw_readl(CCM_CSCR) >> 13) & 0x7;
-
-	rate = clk_get_rate(clk->parent);
-	return rate / (div + 1);
-}
-
-static unsigned long get_rate_ahb(struct clk *clk)
-{
-	unsigned long rate, bclk_pdf;
-
-	if (mx27_revision() >= IMX_CHIP_REVISION_2_0)
-		bclk_pdf = (__raw_readl(CCM_CSCR) >> 8) & 0x3;
-	else
-		bclk_pdf = (__raw_readl(CCM_CSCR) >> 9) & 0xf;
-
-	rate = clk_get_rate(clk->parent);
-	return rate / (bclk_pdf + 1);
-}
-
-static unsigned long get_rate_ipg(struct clk *clk)
-{
-	unsigned long rate, ipg_pdf;
-
-	if (mx27_revision() >= IMX_CHIP_REVISION_2_0)
-		return clk_get_rate(clk->parent);
-	else
-		ipg_pdf = (__raw_readl(CCM_CSCR) >> 8) & 1;
-
-	rate = clk_get_rate(clk->parent);
-	return rate / (ipg_pdf + 1);
-}
-
-static unsigned long get_rate_per(struct clk *clk)
-{
-	unsigned long perclk_pdf, parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	if (clk->id < 0 || clk->id > 3)
-		return 0;
-
-	perclk_pdf = (__raw_readl(CCM_PCDR1) >> (clk->id << 3)) & 0x3f;
-
-	return parent_rate / (perclk_pdf + 1);
-}
-
-/*
- * the high frequency external clock reference
- * Default case is 26MHz. Could be changed at runtime
- * with a call to change_external_high_reference()
- */
-static struct clk ckih_clk = {
-	.get_rate	= get_rate_high_reference,
-};
-
-static struct clk mpll_clk = {
-	.parent		= &ckih_clk,
-	.get_rate	= get_rate_mpll,
-};
-
-/* For i.MX27 TO2, it is the MPLL path 1 of ARM core
- * It provides the clock source whose rate is same as MPLL
- */
-static struct clk mpll_main1_clk = {
-	.id		= 0,
-	.parent		= &mpll_clk,
-	.get_rate	= get_rate_mpll_main,
-};
-
-/* For i.MX27 TO2, it is the MPLL path 2 of ARM core
- * It provides the clock source whose rate is same MPLL * 2 / 3
- */
-static struct clk mpll_main2_clk = {
-	.id		= 1,
-	.parent		= &mpll_clk,
-	.get_rate	= get_rate_mpll_main,
-};
-
-static struct clk ahb_clk = {
-	.parent		= &mpll_main2_clk,
-	.get_rate	= get_rate_ahb,
-};
-
-static struct clk ipg_clk = {
-	.parent		= &ahb_clk,
-	.get_rate	= get_rate_ipg,
-};
-
-static struct clk cpu_clk = {
-	.parent = &mpll_main2_clk,
-	.set_parent = clk_cpu_set_parent,
-	.round_rate = round_rate_cpu,
-	.get_rate = get_rate_cpu,
-	.set_rate = set_rate_cpu,
-};
-
-static struct clk spll_clk = {
-	.parent = &ckih_clk,
-	.get_rate = get_rate_spll,
-	.enable = clk_spll_enable,
-	.disable = clk_spll_disable,
-};
-
-/*
- * the low frequency external clock reference
- * Default case is 32.768kHz.
- */
-static struct clk ckil_clk = {
-	.get_rate = get_rate_low_reference,
-};
-
-/* Output of frequency pre multiplier */
-static struct clk fpm_clk = {
-	.parent = &ckil_clk,
-	.get_rate = get_rate_fpm,
-};
-
-#define PCCR0 CCM_PCCR0
-#define PCCR1 CCM_PCCR1
-
-#define DEFINE_CLOCK(name, i, er, es, gr, s, p)		\
-	static struct clk name = {			\
-		.id		= i,			\
-		.enable_reg	= er,			\
-		.enable_shift	= es,			\
-		.get_rate	= gr,			\
-		.enable		= clk_pccr_enable,	\
-		.disable	= clk_pccr_disable,	\
-		.secondary	= s,			\
-		.parent		= p,			\
-	}
-
-#define DEFINE_CLOCK1(name, i, er, es, getsetround, s, p)	\
-	static struct clk name = {				\
-		.id		= i,				\
-		.enable_reg	= er,				\
-		.enable_shift	= es,				\
-		.get_rate	= get_rate_##getsetround,	\
-		.set_rate	= set_rate_##getsetround,	\
-		.round_rate	= round_rate_##getsetround,	\
-		.enable		= clk_pccr_enable,		\
-		.disable	= clk_pccr_disable,		\
-		.secondary	= s,				\
-		.parent		= p,				\
-	}
-
-/* Forward declaration to keep the following list in order */
-static struct clk slcdc_clk1, sahara2_clk1, rtic_clk1, fec_clk1, emma_clk1,
-		  dma_clk1, lcdc_clk2, vpu_clk1;
-
-/* All clocks we can gate through PCCRx in the order of PCCRx bits */
-DEFINE_CLOCK(ssi2_clk1,    1, PCCR0,  0, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(ssi1_clk1,    0, PCCR0,  1, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(slcdc_clk,    0, PCCR0,  2, NULL, &slcdc_clk1, &ahb_clk);
-DEFINE_CLOCK(sdhc3_clk1,   0, PCCR0,  3, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(sdhc2_clk1,   0, PCCR0,  4, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(sdhc1_clk1,   0, PCCR0,  5, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(scc_clk,      0, PCCR0,  6, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(sahara2_clk,  0, PCCR0,  7, NULL, &sahara2_clk1, &ahb_clk);
-DEFINE_CLOCK(rtic_clk,     0, PCCR0,  8, NULL, &rtic_clk1, &ahb_clk);
-DEFINE_CLOCK(rtc_clk,      0, PCCR0,  9, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(pwm_clk1,     0, PCCR0, 11, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(owire_clk,    0, PCCR0, 12, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(mstick_clk1,  0, PCCR0, 13, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(lcdc_clk1,    0, PCCR0, 14, NULL, &lcdc_clk2, &ipg_clk);
-DEFINE_CLOCK(kpp_clk,      0, PCCR0, 15, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(iim_clk,      0, PCCR0, 16, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(i2c2_clk,     1, PCCR0, 17, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(i2c1_clk,     0, PCCR0, 18, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(gpt6_clk1,    0, PCCR0, 29, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(gpt5_clk1,    0, PCCR0, 20, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(gpt4_clk1,    0, PCCR0, 21, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(gpt3_clk1,    0, PCCR0, 22, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(gpt2_clk1,    0, PCCR0, 23, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(gpt1_clk1,    0, PCCR0, 24, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(gpio_clk,     0, PCCR0, 25, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(fec_clk,      0, PCCR0, 26, NULL, &fec_clk1, &ahb_clk);
-DEFINE_CLOCK(emma_clk,     0, PCCR0, 27, NULL, &emma_clk1, &ahb_clk);
-DEFINE_CLOCK(dma_clk,      0, PCCR0, 28, NULL, &dma_clk1, &ahb_clk);
-DEFINE_CLOCK(cspi13_clk1,  0, PCCR0, 29, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(cspi2_clk1,   0, PCCR0, 30, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(cspi1_clk1,   0, PCCR0, 31, NULL, NULL, &ipg_clk);
-
-DEFINE_CLOCK(mstick_clk,   0, PCCR1,  2, NULL, &mstick_clk1, &ipg_clk);
-DEFINE_CLOCK(nfc_clk,      0, PCCR1,  3, get_rate_nfc, NULL, &cpu_clk);
-DEFINE_CLOCK(ssi2_clk,     1, PCCR1,  4, get_rate_ssi2, &ssi2_clk1, &mpll_main2_clk);
-DEFINE_CLOCK(ssi1_clk,     0, PCCR1,  5, get_rate_ssi1, &ssi1_clk1, &mpll_main2_clk);
-DEFINE_CLOCK(vpu_clk,      0, PCCR1,  6, get_rate_vpu, &vpu_clk1, &mpll_main2_clk);
-DEFINE_CLOCK1(per4_clk,    3, PCCR1,  7, per, NULL, &mpll_main2_clk);
-DEFINE_CLOCK1(per3_clk,    2, PCCR1,  8, per, NULL, &mpll_main2_clk);
-DEFINE_CLOCK1(per2_clk,    1, PCCR1,  9, per, NULL, &mpll_main2_clk);
-DEFINE_CLOCK1(per1_clk,    0, PCCR1, 10, per, NULL, &mpll_main2_clk);
-DEFINE_CLOCK(usb_clk1,     0, PCCR1, 11, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(slcdc_clk1,   0, PCCR1, 12, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(sahara2_clk1, 0, PCCR1, 13, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(rtic_clk1,    0, PCCR1, 14, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(lcdc_clk2,    0, PCCR1, 15, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(vpu_clk1,     0, PCCR1, 16, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(fec_clk1,     0, PCCR1, 17, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(emma_clk1,    0, PCCR1, 18, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(emi_clk,      0, PCCR1, 19, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(dma_clk1,     0, PCCR1, 20, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(csi_clk1,     0, PCCR1, 21, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(brom_clk,     0, PCCR1, 22, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(pata_clk,      0, PCCR1, 23, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(wdog_clk,     0, PCCR1, 24, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(usb_clk,      0, PCCR1, 25, get_rate_usb, &usb_clk1, &spll_clk);
-DEFINE_CLOCK(uart6_clk1,   0, PCCR1, 26, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(uart5_clk1,   0, PCCR1, 27, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(uart4_clk1,   0, PCCR1, 28, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(uart3_clk1,   0, PCCR1, 29, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(uart2_clk1,   0, PCCR1, 30, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(uart1_clk1,   0, PCCR1, 31, NULL, NULL, &ipg_clk);
-
-/* Clocks we cannot directly gate, but drivers need their rates */
-DEFINE_CLOCK(cspi1_clk,    0, NULL,   0, NULL, &cspi1_clk1, &per2_clk);
-DEFINE_CLOCK(cspi2_clk,    1, NULL,   0, NULL, &cspi2_clk1, &per2_clk);
-DEFINE_CLOCK(cspi3_clk,    2, NULL,   0, NULL, &cspi13_clk1, &per2_clk);
-DEFINE_CLOCK(sdhc1_clk,    0, NULL,   0, NULL, &sdhc1_clk1, &per2_clk);
-DEFINE_CLOCK(sdhc2_clk,    1, NULL,   0, NULL, &sdhc2_clk1, &per2_clk);
-DEFINE_CLOCK(sdhc3_clk,    2, NULL,   0, NULL, &sdhc3_clk1, &per2_clk);
-DEFINE_CLOCK(pwm_clk,      0, NULL,   0, NULL, &pwm_clk1, &per1_clk);
-DEFINE_CLOCK(gpt1_clk,     0, NULL,   0, NULL, &gpt1_clk1, &per1_clk);
-DEFINE_CLOCK(gpt2_clk,     1, NULL,   0, NULL, &gpt2_clk1, &per1_clk);
-DEFINE_CLOCK(gpt3_clk,     2, NULL,   0, NULL, &gpt3_clk1, &per1_clk);
-DEFINE_CLOCK(gpt4_clk,     3, NULL,   0, NULL, &gpt4_clk1, &per1_clk);
-DEFINE_CLOCK(gpt5_clk,     4, NULL,   0, NULL, &gpt5_clk1, &per1_clk);
-DEFINE_CLOCK(gpt6_clk,     5, NULL,   0, NULL, &gpt6_clk1, &per1_clk);
-DEFINE_CLOCK(uart1_clk,    0, NULL,   0, NULL, &uart1_clk1, &per1_clk);
-DEFINE_CLOCK(uart2_clk,    1, NULL,   0, NULL, &uart2_clk1, &per1_clk);
-DEFINE_CLOCK(uart3_clk,    2, NULL,   0, NULL, &uart3_clk1, &per1_clk);
-DEFINE_CLOCK(uart4_clk,    3, NULL,   0, NULL, &uart4_clk1, &per1_clk);
-DEFINE_CLOCK(uart5_clk,    4, NULL,   0, NULL, &uart5_clk1, &per1_clk);
-DEFINE_CLOCK(uart6_clk,    5, NULL,   0, NULL, &uart6_clk1, &per1_clk);
-DEFINE_CLOCK1(lcdc_clk,    0, NULL,   0, parent, &lcdc_clk1, &per3_clk);
-DEFINE_CLOCK1(csi_clk,     0, NULL,   0, parent, &csi_clk1, &per4_clk);
-
-#define _REGISTER_CLOCK(d, n, c) \
-	{ \
-		.dev_id = d, \
-		.con_id = n, \
-		.clk = &c, \
-	},
-
-static struct clk_lookup lookups[] = {
-	/* i.mx27 has the i.mx21 type uart */
-	_REGISTER_CLOCK("imx21-uart.0", NULL, uart1_clk)
-	_REGISTER_CLOCK("imx21-uart.1", NULL, uart2_clk)
-	_REGISTER_CLOCK("imx21-uart.2", NULL, uart3_clk)
-	_REGISTER_CLOCK("imx21-uart.3", NULL, uart4_clk)
-	_REGISTER_CLOCK("imx21-uart.4", NULL, uart5_clk)
-	_REGISTER_CLOCK("imx21-uart.5", NULL, uart6_clk)
-	_REGISTER_CLOCK(NULL, "gpt1", gpt1_clk)
-	_REGISTER_CLOCK(NULL, "gpt2", gpt2_clk)
-	_REGISTER_CLOCK(NULL, "gpt3", gpt3_clk)
-	_REGISTER_CLOCK(NULL, "gpt4", gpt4_clk)
-	_REGISTER_CLOCK(NULL, "gpt5", gpt5_clk)
-	_REGISTER_CLOCK(NULL, "gpt6", gpt6_clk)
-	_REGISTER_CLOCK("mxc_pwm.0", NULL, pwm_clk)
-	_REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc1_clk)
-	_REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc2_clk)
-	_REGISTER_CLOCK("mxc-mmc.2", NULL, sdhc3_clk)
-	_REGISTER_CLOCK("imx27-cspi.0", NULL, cspi1_clk)
-	_REGISTER_CLOCK("imx27-cspi.1", NULL, cspi2_clk)
-	_REGISTER_CLOCK("imx27-cspi.2", NULL, cspi3_clk)
-	_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
-	_REGISTER_CLOCK("mx2-camera.0", NULL, csi_clk)
-	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk)
-	_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usb_clk1)
-	_REGISTER_CLOCK("mxc-ehci.0", "usb", usb_clk)
-	_REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", usb_clk1)
-	_REGISTER_CLOCK("mxc-ehci.1", "usb", usb_clk)
-	_REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", usb_clk1)
-	_REGISTER_CLOCK("mxc-ehci.2", "usb", usb_clk)
-	_REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_clk1)
-	_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
-	_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
-	_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
-	_REGISTER_CLOCK(NULL, "vpu", vpu_clk)
-	_REGISTER_CLOCK(NULL, "dma", dma_clk)
-	_REGISTER_CLOCK(NULL, "rtic", rtic_clk)
-	_REGISTER_CLOCK(NULL, "brom", brom_clk)
-	_REGISTER_CLOCK("m2m-emmaprp.0", NULL, emma_clk)
-	_REGISTER_CLOCK(NULL, "slcdc", slcdc_clk)
-	_REGISTER_CLOCK("imx27-fec.0", NULL, fec_clk)
-	_REGISTER_CLOCK(NULL, "emi", emi_clk)
-	_REGISTER_CLOCK(NULL, "sahara2", sahara2_clk)
-	_REGISTER_CLOCK("pata_imx", NULL, pata_clk)
-	_REGISTER_CLOCK(NULL, "mstick", mstick_clk)
-	_REGISTER_CLOCK("imx2-wdt.0", NULL, wdog_clk)
-	_REGISTER_CLOCK(NULL, "gpio", gpio_clk)
-	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
-	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
-	_REGISTER_CLOCK(NULL, "iim", iim_clk)
-	_REGISTER_CLOCK(NULL, "kpp", kpp_clk)
-	_REGISTER_CLOCK("mxc_w1.0", NULL, owire_clk)
-	_REGISTER_CLOCK(NULL, "rtc", rtc_clk)
-	_REGISTER_CLOCK(NULL, "scc", scc_clk)
-};
-
-/* Adjust the clock path for TO2 and later */
-static void __init to2_adjust_clocks(void)
-{
-	unsigned long cscr = __raw_readl(CCM_CSCR);
-
-	if (mx27_revision() >= IMX_CHIP_REVISION_2_0) {
-		if (cscr & CCM_CSCR_ARM_SRC)
-			cpu_clk.parent = &mpll_main1_clk;
-
-		if (!(cscr & CCM_CSCR_SSI2))
-			ssi1_clk.parent = &spll_clk;
-
-		if (!(cscr & CCM_CSCR_SSI1))
-			ssi1_clk.parent = &spll_clk;
-
-		if (!(cscr & CCM_CSCR_VPU))
-			vpu_clk.parent = &spll_clk;
-	} else {
-		cpu_clk.parent = &mpll_clk;
-		cpu_clk.set_parent = NULL;
-		cpu_clk.round_rate = NULL;
-		cpu_clk.set_rate = NULL;
-		ahb_clk.parent = &mpll_clk;
-
-		per1_clk.parent = &mpll_clk;
-		per2_clk.parent = &mpll_clk;
-		per3_clk.parent = &mpll_clk;
-		per4_clk.parent = &mpll_clk;
-
-		ssi1_clk.parent = &mpll_clk;
-		ssi2_clk.parent = &mpll_clk;
-
-		vpu_clk.parent = &mpll_clk;
-	}
-}
-
-/*
- * must be called very early to get information about the
- * available clock rate when the timer framework starts
- */
-int __init mx27_clocks_init(unsigned long fref)
-{
-	u32 cscr = __raw_readl(CCM_CSCR);
-
-	external_high_reference = fref;
-
-	/* detect clock reference for both system PLLs */
-	if (cscr & CCM_CSCR_MCU)
-		mpll_clk.parent = &ckih_clk;
-	else
-		mpll_clk.parent = &fpm_clk;
-
-	if (cscr & CCM_CSCR_SP)
-		spll_clk.parent = &ckih_clk;
-	else
-		spll_clk.parent = &fpm_clk;
-
-	to2_adjust_clocks();
-
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
-	/* Turn off all clocks we do not need */
-	__raw_writel(0, CCM_PCCR0);
-	__raw_writel((1 << 10) | (1 << 19), CCM_PCCR1);
-
-	spll_clk.disable(&spll_clk);
-
-	/* enable basic clocks */
-	clk_enable(&per1_clk);
-	clk_enable(&gpio_clk);
-	clk_enable(&emi_clk);
-	clk_enable(&iim_clk);
-	imx_print_silicon_rev("i.MX27", mx27_revision());
-	clk_disable(&iim_clk);
-
-#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
-	clk_enable(&uart1_clk);
-#endif
-
-	mxc_timer_init(&gpt1_clk, MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR),
-			MX27_INT_GPT1);
-
-	return 0;
-}
-
-#ifdef CONFIG_OF
-int __init mx27_clocks_init_dt(void)
-{
-	struct device_node *np;
-	u32 fref = 26000000; /* default */
-
-	for_each_compatible_node(np, NULL, "fixed-clock") {
-		if (!of_device_is_compatible(np, "fsl,imx-osc26m"))
-			continue;
-
-		if (!of_property_read_u32(np, "clock-frequency", &fref))
-			break;
-	}
-
-	return mx27_clocks_init(fref);
-}
-#endif
diff --git a/arch/arm/mach-imx/clock-imx31.c b/arch/arm/mach-imx/clock-imx31.c
deleted file mode 100644
index 3a943cd4159f..000000000000
--- a/arch/arm/mach-imx/clock-imx31.c
+++ /dev/null
@@ -1,630 +0,0 @@
-/*
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-
-#include <asm/div64.h>
-
-#include <mach/clock.h>
-#include <mach/hardware.h>
-#include <mach/mx31.h>
-#include <mach/common.h>
-
-#include "crmregs-imx3.h"
-
-#define PRE_DIV_MIN_FREQ    10000000 /* Minimum Frequency after Predivider */
-
-static void __calc_pre_post_dividers(u32 div, u32 *pre, u32 *post)
-{
-	u32 min_pre, temp_pre, old_err, err;
-
-	if (div >= 512) {
-		*pre = 8;
-		*post = 64;
-	} else if (div >= 64) {
-		min_pre = (div - 1) / 64 + 1;
-		old_err = 8;
-		for (temp_pre = 8; temp_pre >= min_pre; temp_pre--) {
-			err = div % temp_pre;
-			if (err == 0) {
-				*pre = temp_pre;
-				break;
-			}
-			err = temp_pre - err;
-			if (err < old_err) {
-				old_err = err;
-				*pre = temp_pre;
-			}
-		}
-		*post = (div + *pre - 1) / *pre;
-	} else if (div <= 8) {
-		*pre = div;
-		*post = 1;
-	} else {
-		*pre = 1;
-		*post = div;
-	}
-}
-
-static struct clk mcu_pll_clk;
-static struct clk serial_pll_clk;
-static struct clk ipg_clk;
-static struct clk ckih_clk;
-
-static int cgr_enable(struct clk *clk)
-{
-	u32 reg;
-
-	if (!clk->enable_reg)
-		return 0;
-
-	reg = __raw_readl(clk->enable_reg);
-	reg |= 3 << clk->enable_shift;
-	__raw_writel(reg, clk->enable_reg);
-
-	return 0;
-}
-
-static void cgr_disable(struct clk *clk)
-{
-	u32 reg;
-
-	if (!clk->enable_reg)
-		return;
-
-	reg = __raw_readl(clk->enable_reg);
-	reg &= ~(3 << clk->enable_shift);
-
-	/* special case for EMI clock */
-	if (clk->enable_reg == MXC_CCM_CGR2 && clk->enable_shift == 8)
-		reg |= (1 << clk->enable_shift);
-
-	__raw_writel(reg, clk->enable_reg);
-}
-
-static unsigned long pll_ref_get_rate(void)
-{
-	unsigned long ccmr;
-	unsigned int prcs;
-
-	ccmr = __raw_readl(MXC_CCM_CCMR);
-	prcs = (ccmr & MXC_CCM_CCMR_PRCS_MASK) >> MXC_CCM_CCMR_PRCS_OFFSET;
-	if (prcs == 0x1)
-		return CKIL_CLK_FREQ * 1024;
-	else
-		return clk_get_rate(&ckih_clk);
-}
-
-static unsigned long usb_pll_get_rate(struct clk *clk)
-{
-	unsigned long reg;
-
-	reg = __raw_readl(MXC_CCM_UPCTL);
-
-	return mxc_decode_pll(reg, pll_ref_get_rate());
-}
-
-static unsigned long serial_pll_get_rate(struct clk *clk)
-{
-	unsigned long reg;
-
-	reg = __raw_readl(MXC_CCM_SRPCTL);
-
-	return mxc_decode_pll(reg, pll_ref_get_rate());
-}
-
-static unsigned long mcu_pll_get_rate(struct clk *clk)
-{
-	unsigned long reg, ccmr;
-
-	ccmr = __raw_readl(MXC_CCM_CCMR);
-
-	if (!(ccmr & MXC_CCM_CCMR_MPE) || (ccmr & MXC_CCM_CCMR_MDS))
-		return clk_get_rate(&ckih_clk);
-
-	reg = __raw_readl(MXC_CCM_MPCTL);
-
-	return mxc_decode_pll(reg, pll_ref_get_rate());
-}
-
-static int usb_pll_enable(struct clk *clk)
-{
-	u32 reg;
-
-	reg = __raw_readl(MXC_CCM_CCMR);
-	reg |= MXC_CCM_CCMR_UPE;
-	__raw_writel(reg, MXC_CCM_CCMR);
-
-	/* No lock bit on MX31, so using max time from spec */
-	udelay(80);
-
-	return 0;
-}
-
-static void usb_pll_disable(struct clk *clk)
-{
-	u32 reg;
-
-	reg = __raw_readl(MXC_CCM_CCMR);
-	reg &= ~MXC_CCM_CCMR_UPE;
-	__raw_writel(reg, MXC_CCM_CCMR);
-}
-
-static int serial_pll_enable(struct clk *clk)
-{
-	u32 reg;
-
-	reg = __raw_readl(MXC_CCM_CCMR);
-	reg |= MXC_CCM_CCMR_SPE;
-	__raw_writel(reg, MXC_CCM_CCMR);
-
-	/* No lock bit on MX31, so using max time from spec */
-	udelay(80);
-
-	return 0;
-}
-
-static void serial_pll_disable(struct clk *clk)
-{
-	u32 reg;
-
-	reg = __raw_readl(MXC_CCM_CCMR);
-	reg &= ~MXC_CCM_CCMR_SPE;
-	__raw_writel(reg, MXC_CCM_CCMR);
-}
-
-#define PDR0(mask, off) ((__raw_readl(MXC_CCM_PDR0) & mask) >> off)
-#define PDR1(mask, off) ((__raw_readl(MXC_CCM_PDR1) & mask) >> off)
-#define PDR2(mask, off) ((__raw_readl(MXC_CCM_PDR2) & mask) >> off)
-
-static unsigned long mcu_main_get_rate(struct clk *clk)
-{
-	u32 pmcr0 = __raw_readl(MXC_CCM_PMCR0);
-
-	if ((pmcr0 & MXC_CCM_PMCR0_DFSUP1) == MXC_CCM_PMCR0_DFSUP1_SPLL)
-		return clk_get_rate(&serial_pll_clk);
-	else
-		return clk_get_rate(&mcu_pll_clk);
-}
-
-static unsigned long ahb_get_rate(struct clk *clk)
-{
-	unsigned long max_pdf;
-
-	max_pdf = PDR0(MXC_CCM_PDR0_MAX_PODF_MASK,
-		       MXC_CCM_PDR0_MAX_PODF_OFFSET);
-	return clk_get_rate(clk->parent) / (max_pdf + 1);
-}
-
-static unsigned long ipg_get_rate(struct clk *clk)
-{
-	unsigned long ipg_pdf;
-
-	ipg_pdf = PDR0(MXC_CCM_PDR0_IPG_PODF_MASK,
-		       MXC_CCM_PDR0_IPG_PODF_OFFSET);
-	return clk_get_rate(clk->parent) / (ipg_pdf + 1);
-}
-
-static unsigned long nfc_get_rate(struct clk *clk)
-{
-	unsigned long nfc_pdf;
-
-	nfc_pdf = PDR0(MXC_CCM_PDR0_NFC_PODF_MASK,
-		       MXC_CCM_PDR0_NFC_PODF_OFFSET);
-	return clk_get_rate(clk->parent) / (nfc_pdf + 1);
-}
-
-static unsigned long hsp_get_rate(struct clk *clk)
-{
-	unsigned long hsp_pdf;
-
-	hsp_pdf = PDR0(MXC_CCM_PDR0_HSP_PODF_MASK,
-		       MXC_CCM_PDR0_HSP_PODF_OFFSET);
-	return clk_get_rate(clk->parent) / (hsp_pdf + 1);
-}
-
-static unsigned long usb_get_rate(struct clk *clk)
-{
-	unsigned long usb_pdf, usb_prepdf;
-
-	usb_pdf = PDR1(MXC_CCM_PDR1_USB_PODF_MASK,
-		       MXC_CCM_PDR1_USB_PODF_OFFSET);
-	usb_prepdf = PDR1(MXC_CCM_PDR1_USB_PRDF_MASK,
-			  MXC_CCM_PDR1_USB_PRDF_OFFSET);
-	return clk_get_rate(clk->parent) / (usb_prepdf + 1) / (usb_pdf + 1);
-}
-
-static unsigned long csi_get_rate(struct clk *clk)
-{
-	u32 reg, pre, post;
-
-	reg = __raw_readl(MXC_CCM_PDR0);
-	pre = (reg & MXC_CCM_PDR0_CSI_PRDF_MASK) >>
-	    MXC_CCM_PDR0_CSI_PRDF_OFFSET;
-	pre++;
-	post = (reg & MXC_CCM_PDR0_CSI_PODF_MASK) >>
-	    MXC_CCM_PDR0_CSI_PODF_OFFSET;
-	post++;
-	return clk_get_rate(clk->parent) / (pre * post);
-}
-
-static unsigned long csi_round_rate(struct clk *clk, unsigned long rate)
-{
-	u32 pre, post, parent = clk_get_rate(clk->parent);
-	u32 div = parent / rate;
-
-	if (parent % rate)
-		div++;
-
-	__calc_pre_post_dividers(div, &pre, &post);
-
-	return parent / (pre * post);
-}
-
-static int csi_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 reg, div, pre, post, parent = clk_get_rate(clk->parent);
-
-	div = parent / rate;
-
-	if ((parent / div) != rate)
-		return -EINVAL;
-
-	__calc_pre_post_dividers(div, &pre, &post);
-
-	/* Set CSI clock divider */
-	reg = __raw_readl(MXC_CCM_PDR0) &
-	    ~(MXC_CCM_PDR0_CSI_PODF_MASK | MXC_CCM_PDR0_CSI_PRDF_MASK);
-	reg |= (post - 1) << MXC_CCM_PDR0_CSI_PODF_OFFSET;
-	reg |= (pre - 1) << MXC_CCM_PDR0_CSI_PRDF_OFFSET;
-	__raw_writel(reg, MXC_CCM_PDR0);
-
-	return 0;
-}
-
-static unsigned long ssi1_get_rate(struct clk *clk)
-{
-	unsigned long ssi1_pdf, ssi1_prepdf;
-
-	ssi1_pdf = PDR1(MXC_CCM_PDR1_SSI1_PODF_MASK,
-			MXC_CCM_PDR1_SSI1_PODF_OFFSET);
-	ssi1_prepdf = PDR1(MXC_CCM_PDR1_SSI1_PRE_PODF_MASK,
-			   MXC_CCM_PDR1_SSI1_PRE_PODF_OFFSET);
-	return clk_get_rate(clk->parent) / (ssi1_prepdf + 1) / (ssi1_pdf + 1);
-}
-
-static unsigned long ssi2_get_rate(struct clk *clk)
-{
-	unsigned long ssi2_pdf, ssi2_prepdf;
-
-	ssi2_pdf = PDR1(MXC_CCM_PDR1_SSI2_PODF_MASK,
-			MXC_CCM_PDR1_SSI2_PODF_OFFSET);
-	ssi2_prepdf = PDR1(MXC_CCM_PDR1_SSI2_PRE_PODF_MASK,
-			   MXC_CCM_PDR1_SSI2_PRE_PODF_OFFSET);
-	return clk_get_rate(clk->parent) / (ssi2_prepdf + 1) / (ssi2_pdf + 1);
-}
-
-static unsigned long firi_get_rate(struct clk *clk)
-{
-	unsigned long firi_pdf, firi_prepdf;
-
-	firi_pdf = PDR1(MXC_CCM_PDR1_FIRI_PODF_MASK,
-			MXC_CCM_PDR1_FIRI_PODF_OFFSET);
-	firi_prepdf = PDR1(MXC_CCM_PDR1_FIRI_PRE_PODF_MASK,
-			   MXC_CCM_PDR1_FIRI_PRE_PODF_OFFSET);
-	return clk_get_rate(clk->parent) / (firi_prepdf + 1) / (firi_pdf + 1);
-}
-
-static unsigned long firi_round_rate(struct clk *clk, unsigned long rate)
-{
-	u32 pre, post;
-	u32 parent = clk_get_rate(clk->parent);
-	u32 div = parent / rate;
-
-	if (parent % rate)
-		div++;
-
-	__calc_pre_post_dividers(div, &pre, &post);
-
-	return parent / (pre * post);
-
-}
-
-static int firi_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 reg, div, pre, post, parent = clk_get_rate(clk->parent);
-
-	div = parent / rate;
-
-	if ((parent / div) != rate)
-		return -EINVAL;
-
-	__calc_pre_post_dividers(div, &pre, &post);
-
-	/* Set FIRI clock divider */
-	reg = __raw_readl(MXC_CCM_PDR1) &
-	    ~(MXC_CCM_PDR1_FIRI_PODF_MASK | MXC_CCM_PDR1_FIRI_PRE_PODF_MASK);
-	reg |= (pre - 1) << MXC_CCM_PDR1_FIRI_PRE_PODF_OFFSET;
-	reg |= (post - 1) << MXC_CCM_PDR1_FIRI_PODF_OFFSET;
-	__raw_writel(reg, MXC_CCM_PDR1);
-
-	return 0;
-}
-
-static unsigned long mbx_get_rate(struct clk *clk)
-{
-	return clk_get_rate(clk->parent) / 2;
-}
-
-static unsigned long mstick1_get_rate(struct clk *clk)
-{
-	unsigned long msti_pdf;
-
-	msti_pdf = PDR2(MXC_CCM_PDR2_MST1_PDF_MASK,
-			MXC_CCM_PDR2_MST1_PDF_OFFSET);
-	return clk_get_rate(clk->parent) / (msti_pdf + 1);
-}
-
-static unsigned long mstick2_get_rate(struct clk *clk)
-{
-	unsigned long msti_pdf;
-
-	msti_pdf = PDR2(MXC_CCM_PDR2_MST2_PDF_MASK,
-			MXC_CCM_PDR2_MST2_PDF_OFFSET);
-	return clk_get_rate(clk->parent) / (msti_pdf + 1);
-}
-
-static unsigned long ckih_rate;
-
-static unsigned long clk_ckih_get_rate(struct clk *clk)
-{
-	return ckih_rate;
-}
-
-static unsigned long clk_ckil_get_rate(struct clk *clk)
-{
-	return CKIL_CLK_FREQ;
-}
-
-static struct clk ckih_clk = {
-	.get_rate = clk_ckih_get_rate,
-};
-
-static struct clk mcu_pll_clk = {
-	.parent = &ckih_clk,
-	.get_rate = mcu_pll_get_rate,
-};
-
-static struct clk mcu_main_clk = {
-	.parent = &mcu_pll_clk,
-	.get_rate = mcu_main_get_rate,
-};
-
-static struct clk serial_pll_clk = {
-	.parent = &ckih_clk,
-	.get_rate = serial_pll_get_rate,
-	.enable = serial_pll_enable,
-	.disable = serial_pll_disable,
-};
-
-static struct clk usb_pll_clk = {
-	.parent = &ckih_clk,
-	.get_rate = usb_pll_get_rate,
-	.enable = usb_pll_enable,
-	.disable = usb_pll_disable,
-};
-
-static struct clk ahb_clk = {
-	.parent = &mcu_main_clk,
-	.get_rate = ahb_get_rate,
-};
-
-#define DEFINE_CLOCK(name, i, er, es, gr, s, p)		\
-	static struct clk name = {			\
-		.id		= i,			\
-		.enable_reg	= er,			\
-		.enable_shift	= es,			\
-		.get_rate	= gr,			\
-		.enable		= cgr_enable,		\
-		.disable	= cgr_disable,		\
-		.secondary	= s,			\
-		.parent		= p,			\
-	}
-
-#define DEFINE_CLOCK1(name, i, er, es, getsetround, s, p)	\
-	static struct clk name = {				\
-		.id		= i,				\
-		.enable_reg	= er,				\
-		.enable_shift	= es,				\
-		.get_rate	= getsetround##_get_rate,	\
-		.set_rate	= getsetround##_set_rate,	\
-		.round_rate	= getsetround##_round_rate,	\
-		.enable		= cgr_enable,			\
-		.disable	= cgr_disable,			\
-		.secondary	= s,				\
-		.parent		= p,				\
-	}
-
-DEFINE_CLOCK(perclk_clk,  0, NULL,          0, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(ckil_clk,    0, NULL,          0, clk_ckil_get_rate, NULL, NULL);
-
-DEFINE_CLOCK(sdhc1_clk,   0, MXC_CCM_CGR0,  0, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(sdhc2_clk,   1, MXC_CCM_CGR0,  2, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(gpt_clk,     0, MXC_CCM_CGR0,  4, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(epit1_clk,   0, MXC_CCM_CGR0,  6, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(epit2_clk,   1, MXC_CCM_CGR0,  8, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(iim_clk,     0, MXC_CCM_CGR0, 10, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(pata_clk,     0, MXC_CCM_CGR0, 12, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(sdma_clk1,   0, MXC_CCM_CGR0, 14, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(cspi3_clk,   2, MXC_CCM_CGR0, 16, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(rng_clk,     0, MXC_CCM_CGR0, 18, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(uart1_clk,   0, MXC_CCM_CGR0, 20, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(uart2_clk,   1, MXC_CCM_CGR0, 22, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(ssi1_clk,    0, MXC_CCM_CGR0, 24, ssi1_get_rate, NULL, &serial_pll_clk);
-DEFINE_CLOCK(i2c1_clk,    0, MXC_CCM_CGR0, 26, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(i2c2_clk,    1, MXC_CCM_CGR0, 28, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(i2c3_clk,    2, MXC_CCM_CGR0, 30, NULL, NULL, &perclk_clk);
-
-DEFINE_CLOCK(mpeg4_clk,   0, MXC_CCM_CGR1,  0, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(mstick1_clk, 0, MXC_CCM_CGR1,  2, mstick1_get_rate, NULL, &usb_pll_clk);
-DEFINE_CLOCK(mstick2_clk, 1, MXC_CCM_CGR1,  4, mstick2_get_rate, NULL, &usb_pll_clk);
-DEFINE_CLOCK1(csi_clk,    0, MXC_CCM_CGR1,  6, csi, NULL, &serial_pll_clk);
-DEFINE_CLOCK(rtc_clk,     0, MXC_CCM_CGR1,  8, NULL, NULL, &ckil_clk);
-DEFINE_CLOCK(wdog_clk,    0, MXC_CCM_CGR1, 10, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(pwm_clk,     0, MXC_CCM_CGR1, 12, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(usb_clk2,    0, MXC_CCM_CGR1, 18, usb_get_rate, NULL, &ahb_clk);
-DEFINE_CLOCK(kpp_clk,     0, MXC_CCM_CGR1, 20, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(ipu_clk,     0, MXC_CCM_CGR1, 22, hsp_get_rate, NULL, &mcu_main_clk);
-DEFINE_CLOCK(uart3_clk,   2, MXC_CCM_CGR1, 24, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(uart4_clk,   3, MXC_CCM_CGR1, 26, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(uart5_clk,   4, MXC_CCM_CGR1, 28, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(owire_clk,   0, MXC_CCM_CGR1, 30, NULL, NULL, &perclk_clk);
-
-DEFINE_CLOCK(ssi2_clk,    1, MXC_CCM_CGR2,  0, ssi2_get_rate, NULL, &serial_pll_clk);
-DEFINE_CLOCK(cspi1_clk,   0, MXC_CCM_CGR2,  2, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(cspi2_clk,   1, MXC_CCM_CGR2,  4, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(mbx_clk,     0, MXC_CCM_CGR2,  6, mbx_get_rate, NULL, &ahb_clk);
-DEFINE_CLOCK(emi_clk,     0, MXC_CCM_CGR2,  8, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(rtic_clk,    0, MXC_CCM_CGR2, 10, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK1(firi_clk,   0, MXC_CCM_CGR2, 12, firi, NULL, &usb_pll_clk);
-
-DEFINE_CLOCK(sdma_clk2,   0, NULL,          0, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(usb_clk1,    0, NULL,          0, usb_get_rate, NULL, &usb_pll_clk);
-DEFINE_CLOCK(nfc_clk,     0, NULL,          0, nfc_get_rate, NULL, &ahb_clk);
-DEFINE_CLOCK(scc_clk,     0, NULL,          0, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(ipg_clk,     0, NULL,          0, ipg_get_rate, NULL, &ahb_clk);
-
-#define _REGISTER_CLOCK(d, n, c) \
-	{ \
-		.dev_id = d, \
-		.con_id = n, \
-		.clk = &c, \
-	},
-
-static struct clk_lookup lookups[] = {
-	_REGISTER_CLOCK(NULL, "emi", emi_clk)
-	_REGISTER_CLOCK("imx31-cspi.0", NULL, cspi1_clk)
-	_REGISTER_CLOCK("imx31-cspi.1", NULL, cspi2_clk)
-	_REGISTER_CLOCK("imx31-cspi.2", NULL, cspi3_clk)
-	_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
-	_REGISTER_CLOCK(NULL, "pwm", pwm_clk)
-	_REGISTER_CLOCK("imx2-wdt.0", NULL, wdog_clk)
-	_REGISTER_CLOCK(NULL, "rtc", rtc_clk)
-	_REGISTER_CLOCK(NULL, "epit", epit1_clk)
-	_REGISTER_CLOCK(NULL, "epit", epit2_clk)
-	_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
-	_REGISTER_CLOCK("ipu-core", NULL, ipu_clk)
-	_REGISTER_CLOCK("mx3_sdc_fb", NULL, ipu_clk)
-	_REGISTER_CLOCK(NULL, "kpp", kpp_clk)
-	_REGISTER_CLOCK("mxc-ehci.0", "usb", usb_clk1)
-	_REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", usb_clk2)
-	_REGISTER_CLOCK("mxc-ehci.1", "usb", usb_clk1)
-	_REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", usb_clk2)
-	_REGISTER_CLOCK("mxc-ehci.2", "usb", usb_clk1)
-	_REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_clk2)
-	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk1)
-	_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usb_clk2)
-	_REGISTER_CLOCK("mx3-camera.0", NULL, csi_clk)
-	/* i.mx31 has the i.mx21 type uart */
-	_REGISTER_CLOCK("imx21-uart.0", NULL, uart1_clk)
-	_REGISTER_CLOCK("imx21-uart.1", NULL, uart2_clk)
-	_REGISTER_CLOCK("imx21-uart.2", NULL, uart3_clk)
-	_REGISTER_CLOCK("imx21-uart.3", NULL, uart4_clk)
-	_REGISTER_CLOCK("imx21-uart.4", NULL, uart5_clk)
-	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
-	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
-	_REGISTER_CLOCK("imx-i2c.2", NULL, i2c3_clk)
-	_REGISTER_CLOCK("mxc_w1.0", NULL, owire_clk)
-	_REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc1_clk)
-	_REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc2_clk)
-	_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
-	_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
-	_REGISTER_CLOCK(NULL, "firi", firi_clk)
-	_REGISTER_CLOCK("pata_imx", NULL, pata_clk)
-	_REGISTER_CLOCK(NULL, "rtic", rtic_clk)
-	_REGISTER_CLOCK(NULL, "rng", rng_clk)
-	_REGISTER_CLOCK("imx31-sdma", NULL, sdma_clk1)
-	_REGISTER_CLOCK(NULL, "sdma_ipg", sdma_clk2)
-	_REGISTER_CLOCK(NULL, "mstick", mstick1_clk)
-	_REGISTER_CLOCK(NULL, "mstick", mstick2_clk)
-	_REGISTER_CLOCK(NULL, "scc", scc_clk)
-	_REGISTER_CLOCK(NULL, "iim", iim_clk)
-	_REGISTER_CLOCK(NULL, "mpeg4", mpeg4_clk)
-	_REGISTER_CLOCK(NULL, "mbx", mbx_clk)
-};
-
-int __init mx31_clocks_init(unsigned long fref)
-{
-	u32 reg;
-
-	ckih_rate = fref;
-
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
-	/* change the csi_clk parent if necessary */
-	reg = __raw_readl(MXC_CCM_CCMR);
-	if (!(reg & MXC_CCM_CCMR_CSCS))
-		if (clk_set_parent(&csi_clk, &usb_pll_clk))
-			pr_err("%s: error changing csi_clk parent\n", __func__);
-
-
-	/* Turn off all possible clocks */
-	__raw_writel((3 << 4), MXC_CCM_CGR0);
-	__raw_writel(0, MXC_CCM_CGR1);
-	__raw_writel((3 << 8) | (3 << 14) | (3 << 16)|
-		     1 << 27 | 1 << 28, /* Bit 27 and 28 are not defined for
-					   MX32, but still required to be set */
-		     MXC_CCM_CGR2);
-
-	/*
-	 * Before turning off usb_pll make sure ipg_per_clk is generated
-	 * by ipg_clk and not usb_pll.
-	 */
-	__raw_writel(__raw_readl(MXC_CCM_CCMR) | (1 << 24), MXC_CCM_CCMR);
-
-	usb_pll_disable(&usb_pll_clk);
-
-	pr_info("Clock input source is %ld\n", clk_get_rate(&ckih_clk));
-
-	clk_enable(&gpt_clk);
-	clk_enable(&emi_clk);
-	clk_enable(&iim_clk);
-	mx31_revision();
-	clk_disable(&iim_clk);
-
-	clk_enable(&serial_pll_clk);
-
-	if (mx31_revision() >= IMX_CHIP_REVISION_2_0) {
-		reg = __raw_readl(MXC_CCM_PMCR1);
-		/* No PLL restart on DVFS switch; enable auto EMI handshake */
-		reg |= MXC_CCM_PMCR1_PLLRDIS | MXC_CCM_PMCR1_EMIRQ_EN;
-		__raw_writel(reg, MXC_CCM_PMCR1);
-	}
-
-	mxc_timer_init(&ipg_clk, MX31_IO_ADDRESS(MX31_GPT1_BASE_ADDR),
-			MX31_INT_GPT);
-
-	return 0;
-}
diff --git a/arch/arm/mach-imx/clock-imx35.c b/arch/arm/mach-imx/clock-imx35.c
deleted file mode 100644
index 1e279af656ad..000000000000
--- a/arch/arm/mach-imx/clock-imx35.c
+++ /dev/null
@@ -1,536 +0,0 @@
-/*
- * Copyright (C) 2009 by Sascha Hauer, Pengutronix
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-
-#include <mach/clock.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-
-#include "crmregs-imx3.h"
-
-#ifdef HAVE_SET_RATE_SUPPORT
-static void calc_dividers(u32 div, u32 *pre, u32 *post, u32 maxpost)
-{
-	u32 min_pre, temp_pre, old_err, err;
-
-	min_pre = (div - 1) / maxpost + 1;
-	old_err = 8;
-
-	for (temp_pre = 8; temp_pre >= min_pre; temp_pre--) {
-		if (div > (temp_pre * maxpost))
-			break;
-
-		if (div < (temp_pre * temp_pre))
-			continue;
-
-		err = div % temp_pre;
-
-		if (err == 0) {
-			*pre = temp_pre;
-			break;
-		}
-
-		err = temp_pre - err;
-
-		if (err < old_err) {
-			old_err = err;
-			*pre = temp_pre;
-		}
-	}
-
-	*post = (div + *pre - 1) / *pre;
-}
-
-/* get the best values for a 3-bit divider combined with a 6-bit divider */
-static void calc_dividers_3_6(u32 div, u32 *pre, u32 *post)
-{
-	if (div >= 512) {
-		*pre = 8;
-		*post = 64;
-	} else if (div >= 64) {
-		calc_dividers(div, pre, post, 64);
-	} else if (div <= 8) {
-		*pre = div;
-		*post = 1;
-	} else {
-		*pre = 1;
-		*post = div;
-	}
-}
-
-/* get the best values for two cascaded 3-bit dividers */
-static void calc_dividers_3_3(u32 div, u32 *pre, u32 *post)
-{
-	if (div >= 64) {
-		*pre = *post = 8;
-	} else if (div > 8) {
-		calc_dividers(div, pre, post, 8);
-	} else {
-		*pre = 1;
-		*post = div;
-	}
-}
-#endif
-
-static unsigned long get_rate_mpll(void)
-{
-	ulong mpctl = __raw_readl(MX35_CCM_MPCTL);
-
-	return mxc_decode_pll(mpctl, 24000000);
-}
-
-static unsigned long get_rate_ppll(void)
-{
-	ulong ppctl = __raw_readl(MX35_CCM_PPCTL);
-
-	return mxc_decode_pll(ppctl, 24000000);
-}
-
-struct arm_ahb_div {
-	unsigned char arm, ahb, sel;
-};
-
-static struct arm_ahb_div clk_consumer[] = {
-	{ .arm = 1, .ahb = 4, .sel = 0},
-	{ .arm = 1, .ahb = 3, .sel = 1},
-	{ .arm = 2, .ahb = 2, .sel = 0},
-	{ .arm = 0, .ahb = 0, .sel = 0},
-	{ .arm = 0, .ahb = 0, .sel = 0},
-	{ .arm = 0, .ahb = 0, .sel = 0},
-	{ .arm = 4, .ahb = 1, .sel = 0},
-	{ .arm = 1, .ahb = 5, .sel = 0},
-	{ .arm = 1, .ahb = 8, .sel = 0},
-	{ .arm = 1, .ahb = 6, .sel = 1},
-	{ .arm = 2, .ahb = 4, .sel = 0},
-	{ .arm = 0, .ahb = 0, .sel = 0},
-	{ .arm = 0, .ahb = 0, .sel = 0},
-	{ .arm = 0, .ahb = 0, .sel = 0},
-	{ .arm = 4, .ahb = 2, .sel = 0},
-	{ .arm = 0, .ahb = 0, .sel = 0},
-};
-
-static unsigned long get_rate_arm(void)
-{
-	unsigned long pdr0 = __raw_readl(MXC_CCM_PDR0);
-	struct arm_ahb_div *aad;
-	unsigned long fref = get_rate_mpll();
-
-	aad = &clk_consumer[(pdr0 >> 16) & 0xf];
-	if (aad->sel)
-		fref = fref * 3 / 4;
-
-	return fref / aad->arm;
-}
-
-static unsigned long get_rate_ahb(struct clk *clk)
-{
-	unsigned long pdr0 = __raw_readl(MXC_CCM_PDR0);
-	struct arm_ahb_div *aad;
-	unsigned long fref = get_rate_arm();
-
-	aad = &clk_consumer[(pdr0 >> 16) & 0xf];
-
-	return fref / aad->ahb;
-}
-
-static unsigned long get_rate_ipg(struct clk *clk)
-{
-	return get_rate_ahb(NULL) >> 1;
-}
-
-static unsigned long get_rate_uart(struct clk *clk)
-{
-	unsigned long pdr3 = __raw_readl(MX35_CCM_PDR3);
-	unsigned long pdr4 = __raw_readl(MX35_CCM_PDR4);
-	unsigned long div = ((pdr4 >> 10) & 0x3f) + 1;
-
-	if (pdr3 & (1 << 14))
-		return get_rate_arm() / div;
-	else
-		return get_rate_ppll() / div;
-}
-
-static unsigned long get_rate_sdhc(struct clk *clk)
-{
-	unsigned long pdr3 = __raw_readl(MX35_CCM_PDR3);
-	unsigned long div, rate;
-
-	if (pdr3 & (1 << 6))
-		rate = get_rate_arm();
-	else
-		rate = get_rate_ppll();
-
-	switch (clk->id) {
-	default:
-	case 0:
-		div = pdr3 & 0x3f;
-		break;
-	case 1:
-		div = (pdr3 >> 8) & 0x3f;
-		break;
-	case 2:
-		div = (pdr3 >> 16) & 0x3f;
-		break;
-	}
-
-	return rate / (div + 1);
-}
-
-static unsigned long get_rate_mshc(struct clk *clk)
-{
-	unsigned long pdr1 = __raw_readl(MXC_CCM_PDR1);
-	unsigned long div1, div2, rate;
-
-	if (pdr1 & (1 << 7))
-		rate = get_rate_arm();
-	else
-		rate = get_rate_ppll();
-
-	div1 = (pdr1 >> 29) & 0x7;
-	div2 = (pdr1 >> 22) & 0x3f;
-
-	return rate / ((div1 + 1) * (div2 + 1));
-}
-
-static unsigned long get_rate_ssi(struct clk *clk)
-{
-	unsigned long pdr2 = __raw_readl(MX35_CCM_PDR2);
-	unsigned long div1, div2, rate;
-
-	if (pdr2 & (1 << 6))
-		rate = get_rate_arm();
-	else
-		rate = get_rate_ppll();
-
-	switch (clk->id) {
-	default:
-	case 0:
-		div1 = pdr2 & 0x3f;
-		div2 = (pdr2 >> 24) & 0x7;
-		break;
-	case 1:
-		div1 = (pdr2 >> 8) & 0x3f;
-		div2 = (pdr2 >> 27) & 0x7;
-		break;
-	}
-
-	return rate / ((div1 + 1) * (div2 + 1));
-}
-
-static unsigned long get_rate_csi(struct clk *clk)
-{
-	unsigned long pdr2 = __raw_readl(MX35_CCM_PDR2);
-	unsigned long rate;
-
-	if (pdr2 & (1 << 7))
-		rate = get_rate_arm();
-	else
-		rate = get_rate_ppll();
-
-	return rate / (((pdr2 >> 16) & 0x3f) + 1);
-}
-
-static unsigned long get_rate_otg(struct clk *clk)
-{
-	unsigned long pdr4 = __raw_readl(MX35_CCM_PDR4);
-	unsigned long rate;
-
-	if (pdr4 & (1 << 9))
-		rate = get_rate_arm();
-	else
-		rate = get_rate_ppll();
-
-	return rate / (((pdr4 >> 22) & 0x3f) + 1);
-}
-
-static unsigned long get_rate_ipg_per(struct clk *clk)
-{
-	unsigned long pdr0 = __raw_readl(MXC_CCM_PDR0);
-	unsigned long pdr4 = __raw_readl(MX35_CCM_PDR4);
-	unsigned long div;
-
-	if (pdr0 & (1 << 26)) {
-		div = (pdr4 >> 16) & 0x3f;
-		return get_rate_arm() / (div + 1);
-	} else {
-		div = (pdr0 >> 12) & 0x7;
-		return get_rate_ahb(NULL) / (div + 1);
-	}
-}
-
-static unsigned long get_rate_hsp(struct clk *clk)
-{
-	unsigned long hsp_podf = (__raw_readl(MXC_CCM_PDR0) >> 20) & 0x03;
-	unsigned long fref = get_rate_mpll();
-
-	if (fref > 400 * 1000 * 1000) {
-		switch (hsp_podf) {
-		case 0:
-			return fref >> 2;
-		case 1:
-			return fref >> 3;
-		case 2:
-			return fref / 3;
-		}
-	} else {
-		switch (hsp_podf) {
-		case 0:
-		case 2:
-			return fref / 3;
-		case 1:
-			return fref / 6;
-		}
-	}
-
-	return 0;
-}
-
-static int clk_cgr_enable(struct clk *clk)
-{
-	u32 reg;
-
-	reg = __raw_readl(clk->enable_reg);
-	reg |= 3 << clk->enable_shift;
-	__raw_writel(reg, clk->enable_reg);
-
-	return 0;
-}
-
-static void clk_cgr_disable(struct clk *clk)
-{
-	u32 reg;
-
-	reg = __raw_readl(clk->enable_reg);
-	reg &= ~(3 << clk->enable_shift);
-	__raw_writel(reg, clk->enable_reg);
-}
-
-#define DEFINE_CLOCK(name, i, er, es, gr, sr)		\
-	static struct clk name = {			\
-		.id		= i,			\
-		.enable_reg	= er,			\
-		.enable_shift	= es,			\
-		.get_rate	= gr,			\
-		.set_rate	= sr,			\
-		.enable		= clk_cgr_enable,	\
-		.disable	= clk_cgr_disable,	\
-	}
-
-DEFINE_CLOCK(asrc_clk,   0, MX35_CCM_CGR0,  0, NULL, NULL);
-DEFINE_CLOCK(pata_clk,    0, MX35_CCM_CGR0,  2, get_rate_ipg, NULL);
-/* DEFINE_CLOCK(audmux_clk, 0, MX35_CCM_CGR0,  4, NULL, NULL); */
-DEFINE_CLOCK(can1_clk,   0, MX35_CCM_CGR0,  6, get_rate_ipg, NULL);
-DEFINE_CLOCK(can2_clk,   1, MX35_CCM_CGR0,  8, get_rate_ipg, NULL);
-DEFINE_CLOCK(cspi1_clk,  0, MX35_CCM_CGR0, 10, get_rate_ipg, NULL);
-DEFINE_CLOCK(cspi2_clk,  1, MX35_CCM_CGR0, 12, get_rate_ipg, NULL);
-DEFINE_CLOCK(ect_clk,    0, MX35_CCM_CGR0, 14, get_rate_ipg, NULL);
-DEFINE_CLOCK(edio_clk,   0, MX35_CCM_CGR0, 16, NULL, NULL);
-DEFINE_CLOCK(emi_clk,    0, MX35_CCM_CGR0, 18, get_rate_ipg, NULL);
-DEFINE_CLOCK(epit1_clk,  0, MX35_CCM_CGR0, 20, get_rate_ipg, NULL);
-DEFINE_CLOCK(epit2_clk,  1, MX35_CCM_CGR0, 22, get_rate_ipg, NULL);
-DEFINE_CLOCK(esai_clk,   0, MX35_CCM_CGR0, 24, NULL, NULL);
-DEFINE_CLOCK(esdhc1_clk, 0, MX35_CCM_CGR0, 26, get_rate_sdhc, NULL);
-DEFINE_CLOCK(esdhc2_clk, 1, MX35_CCM_CGR0, 28, get_rate_sdhc, NULL);
-DEFINE_CLOCK(esdhc3_clk, 2, MX35_CCM_CGR0, 30, get_rate_sdhc, NULL);
-
-DEFINE_CLOCK(fec_clk,    0, MX35_CCM_CGR1,  0, get_rate_ipg, NULL);
-DEFINE_CLOCK(gpio1_clk,  0, MX35_CCM_CGR1,  2, NULL, NULL);
-DEFINE_CLOCK(gpio2_clk,  1, MX35_CCM_CGR1,  4, NULL, NULL);
-DEFINE_CLOCK(gpio3_clk,  2, MX35_CCM_CGR1,  6, NULL, NULL);
-DEFINE_CLOCK(gpt_clk,    0, MX35_CCM_CGR1,  8, get_rate_ipg, NULL);
-DEFINE_CLOCK(i2c1_clk,   0, MX35_CCM_CGR1, 10, get_rate_ipg_per, NULL);
-DEFINE_CLOCK(i2c2_clk,   1, MX35_CCM_CGR1, 12, get_rate_ipg_per, NULL);
-DEFINE_CLOCK(i2c3_clk,   2, MX35_CCM_CGR1, 14, get_rate_ipg_per, NULL);
-DEFINE_CLOCK(iomuxc_clk, 0, MX35_CCM_CGR1, 16, NULL, NULL);
-DEFINE_CLOCK(ipu_clk,    0, MX35_CCM_CGR1, 18, get_rate_hsp, NULL);
-DEFINE_CLOCK(kpp_clk,    0, MX35_CCM_CGR1, 20, get_rate_ipg, NULL);
-DEFINE_CLOCK(mlb_clk,    0, MX35_CCM_CGR1, 22, get_rate_ahb, NULL);
-DEFINE_CLOCK(mshc_clk,   0, MX35_CCM_CGR1, 24, get_rate_mshc, NULL);
-DEFINE_CLOCK(owire_clk,  0, MX35_CCM_CGR1, 26, get_rate_ipg_per, NULL);
-DEFINE_CLOCK(pwm_clk,    0, MX35_CCM_CGR1, 28, get_rate_ipg_per, NULL);
-DEFINE_CLOCK(rngc_clk,   0, MX35_CCM_CGR1, 30, get_rate_ipg, NULL);
-
-DEFINE_CLOCK(rtc_clk,    0, MX35_CCM_CGR2,  0, get_rate_ipg, NULL);
-DEFINE_CLOCK(rtic_clk,   0, MX35_CCM_CGR2,  2, get_rate_ahb, NULL);
-DEFINE_CLOCK(scc_clk,    0, MX35_CCM_CGR2,  4, get_rate_ipg, NULL);
-DEFINE_CLOCK(sdma_clk,   0, MX35_CCM_CGR2,  6, NULL, NULL);
-DEFINE_CLOCK(spba_clk,   0, MX35_CCM_CGR2,  8, get_rate_ipg, NULL);
-DEFINE_CLOCK(spdif_clk,  0, MX35_CCM_CGR2, 10, NULL, NULL);
-DEFINE_CLOCK(ssi1_clk,   0, MX35_CCM_CGR2, 12, get_rate_ssi, NULL);
-DEFINE_CLOCK(ssi2_clk,   1, MX35_CCM_CGR2, 14, get_rate_ssi, NULL);
-DEFINE_CLOCK(uart1_clk,  0, MX35_CCM_CGR2, 16, get_rate_uart, NULL);
-DEFINE_CLOCK(uart2_clk,  1, MX35_CCM_CGR2, 18, get_rate_uart, NULL);
-DEFINE_CLOCK(uart3_clk,  2, MX35_CCM_CGR2, 20, get_rate_uart, NULL);
-DEFINE_CLOCK(usbotg_clk, 0, MX35_CCM_CGR2, 22, get_rate_otg, NULL);
-DEFINE_CLOCK(wdog_clk,   0, MX35_CCM_CGR2, 24, NULL, NULL);
-DEFINE_CLOCK(max_clk,    0, MX35_CCM_CGR2, 26, NULL, NULL);
-DEFINE_CLOCK(audmux_clk, 0, MX35_CCM_CGR2, 30, NULL, NULL);
-
-DEFINE_CLOCK(csi_clk,    0, MX35_CCM_CGR3,  0, get_rate_csi, NULL);
-DEFINE_CLOCK(iim_clk,    0, MX35_CCM_CGR3,  2, NULL, NULL);
-DEFINE_CLOCK(gpu2d_clk,  0, MX35_CCM_CGR3,  4, NULL, NULL);
-
-DEFINE_CLOCK(usbahb_clk, 0, 0,         0, get_rate_ahb, NULL);
-
-static int clk_dummy_enable(struct clk *clk)
-{
-	return 0;
-}
-
-static void clk_dummy_disable(struct clk *clk)
-{
-}
-
-static unsigned long get_rate_nfc(struct clk *clk)
-{
-	unsigned long div1;
-
-	div1 = (__raw_readl(MX35_CCM_PDR4) >> 28) + 1;
-
-	return get_rate_ahb(NULL) / div1;
-}
-
-/* NAND Controller: It seems it can't be disabled */
-static struct clk nfc_clk = {
-	.id		= 0,
-	.enable_reg	= 0,
-	.enable_shift	= 0,
-	.get_rate	= get_rate_nfc,
-	.set_rate	= NULL, /* set_rate_nfc, */
-	.enable		= clk_dummy_enable,
-	.disable	= clk_dummy_disable
-};
-
-#define _REGISTER_CLOCK(d, n, c)	\
-	{				\
-		.dev_id = d,		\
-		.con_id = n,		\
-		.clk = &c,		\
-	},
-
-static struct clk_lookup lookups[] = {
-	_REGISTER_CLOCK(NULL, "asrc", asrc_clk)
-	_REGISTER_CLOCK("pata_imx", NULL, pata_clk)
-	_REGISTER_CLOCK("flexcan.0", NULL, can1_clk)
-	_REGISTER_CLOCK("flexcan.1", NULL, can2_clk)
-	_REGISTER_CLOCK("imx35-cspi.0", NULL, cspi1_clk)
-	_REGISTER_CLOCK("imx35-cspi.1", NULL, cspi2_clk)
-	_REGISTER_CLOCK(NULL, "ect", ect_clk)
-	_REGISTER_CLOCK(NULL, "edio", edio_clk)
-	_REGISTER_CLOCK(NULL, "emi", emi_clk)
-	_REGISTER_CLOCK("imx-epit.0", NULL, epit1_clk)
-	_REGISTER_CLOCK("imx-epit.1", NULL, epit2_clk)
-	_REGISTER_CLOCK(NULL, "esai", esai_clk)
-	_REGISTER_CLOCK("sdhci-esdhc-imx35.0", NULL, esdhc1_clk)
-	_REGISTER_CLOCK("sdhci-esdhc-imx35.1", NULL, esdhc2_clk)
-	_REGISTER_CLOCK("sdhci-esdhc-imx35.2", NULL, esdhc3_clk)
-	/* i.mx35 has the i.mx27 type fec */
-	_REGISTER_CLOCK("imx27-fec.0", NULL, fec_clk)
-	_REGISTER_CLOCK(NULL, "gpio", gpio1_clk)
-	_REGISTER_CLOCK(NULL, "gpio", gpio2_clk)
-	_REGISTER_CLOCK(NULL, "gpio", gpio3_clk)
-	_REGISTER_CLOCK("gpt.0", NULL, gpt_clk)
-	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
-	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
-	_REGISTER_CLOCK("imx-i2c.2", NULL, i2c3_clk)
-	_REGISTER_CLOCK(NULL, "iomuxc", iomuxc_clk)
-	_REGISTER_CLOCK("ipu-core", NULL, ipu_clk)
-	_REGISTER_CLOCK("mx3_sdc_fb", NULL, ipu_clk)
-	_REGISTER_CLOCK(NULL, "kpp", kpp_clk)
-	_REGISTER_CLOCK(NULL, "mlb", mlb_clk)
-	_REGISTER_CLOCK(NULL, "mshc", mshc_clk)
-	_REGISTER_CLOCK("mxc_w1", NULL, owire_clk)
-	_REGISTER_CLOCK(NULL, "pwm", pwm_clk)
-	_REGISTER_CLOCK(NULL, "rngc", rngc_clk)
-	_REGISTER_CLOCK(NULL, "rtc", rtc_clk)
-	_REGISTER_CLOCK(NULL, "rtic", rtic_clk)
-	_REGISTER_CLOCK(NULL, "scc", scc_clk)
-	_REGISTER_CLOCK("imx35-sdma", NULL, sdma_clk)
-	_REGISTER_CLOCK(NULL, "spba", spba_clk)
-	_REGISTER_CLOCK(NULL, "spdif", spdif_clk)
-	_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
-	_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
-	/* i.mx35 has the i.mx21 type uart */
-	_REGISTER_CLOCK("imx21-uart.0", NULL, uart1_clk)
-	_REGISTER_CLOCK("imx21-uart.1", NULL, uart2_clk)
-	_REGISTER_CLOCK("imx21-uart.2", NULL, uart3_clk)
-	_REGISTER_CLOCK("mxc-ehci.0", "usb", usbotg_clk)
-	_REGISTER_CLOCK("mxc-ehci.1", "usb", usbotg_clk)
-	_REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk)
-	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk)
-	_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usbahb_clk)
-	_REGISTER_CLOCK("imx2-wdt.0", NULL, wdog_clk)
-	_REGISTER_CLOCK(NULL, "max", max_clk)
-	_REGISTER_CLOCK(NULL, "audmux", audmux_clk)
-	_REGISTER_CLOCK(NULL, "csi", csi_clk)
-	_REGISTER_CLOCK(NULL, "iim", iim_clk)
-	_REGISTER_CLOCK(NULL, "gpu2d", gpu2d_clk)
-	_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
-};
-
-int __init mx35_clocks_init()
-{
-	unsigned int cgr2 = 3 << 26;
-
-#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
-	cgr2 |= 3 << 16;
-#endif
-
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
-	/* Turn off all clocks except the ones we need to survive, namely:
-	 * EMI, GPIO1/2/3, GPT, IOMUX, MAX and eventually uart
-	 */
-	__raw_writel((3 << 18), MX35_CCM_CGR0);
-	__raw_writel((3 << 2) | (3 << 4) | (3 << 6) | (3 << 8) | (3 << 16),
-			MX35_CCM_CGR1);
-	__raw_writel(cgr2, MX35_CCM_CGR2);
-	__raw_writel(0, MX35_CCM_CGR3);
-
-	clk_enable(&iim_clk);
-	imx_print_silicon_rev("i.MX35", mx35_revision());
-	clk_disable(&iim_clk);
-
-	/*
-	 * Check if we came up in internal boot mode. If yes, we need some
-	 * extra clocks turned on, otherwise the MX35 boot ROM code will
-	 * hang after a watchdog reset.
-	 */
-	if (!(__raw_readl(MX35_CCM_RCSR) & (3 << 10))) {
-		/* Additionally turn on UART1, SCC, and IIM clocks */
-		clk_enable(&iim_clk);
-		clk_enable(&uart1_clk);
-		clk_enable(&scc_clk);
-	}
-
-#ifdef CONFIG_MXC_USE_EPIT
-	epit_timer_init(&epit1_clk,
-			MX35_IO_ADDRESS(MX35_EPIT1_BASE_ADDR), MX35_INT_EPIT1);
-#else
-	mxc_timer_init(&gpt_clk,
-			MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR), MX35_INT_GPT);
-#endif
-
-	return 0;
-}
diff --git a/arch/arm/mach-imx/clock-imx6q.c b/arch/arm/mach-imx/clock-imx6q.c
deleted file mode 100644
index 111c328f5420..000000000000
--- a/arch/arm/mach-imx/clock-imx6q.c
+++ /dev/null
@@ -1,2111 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/clk.h>
-#include <linux/clkdev.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <asm/div64.h>
-#include <asm/mach/map.h>
-#include <mach/clock.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-
-#define PLL_BASE		IMX_IO_ADDRESS(MX6Q_ANATOP_BASE_ADDR)
-#define PLL1_SYS		(PLL_BASE + 0x000)
-#define PLL2_BUS		(PLL_BASE + 0x030)
-#define PLL3_USB_OTG		(PLL_BASE + 0x010)
-#define PLL4_AUDIO		(PLL_BASE + 0x070)
-#define PLL5_VIDEO		(PLL_BASE + 0x0a0)
-#define PLL6_MLB		(PLL_BASE + 0x0d0)
-#define PLL7_USB_HOST		(PLL_BASE + 0x020)
-#define PLL8_ENET		(PLL_BASE + 0x0e0)
-#define PFD_480			(PLL_BASE + 0x0f0)
-#define PFD_528			(PLL_BASE + 0x100)
-#define PLL_NUM_OFFSET		0x010
-#define PLL_DENOM_OFFSET	0x020
-
-#define PFD0			7
-#define PFD1			15
-#define PFD2			23
-#define PFD3			31
-#define PFD_FRAC_MASK		0x3f
-
-#define BM_PLL_BYPASS			(0x1 << 16)
-#define BM_PLL_ENABLE			(0x1 << 13)
-#define BM_PLL_POWER_DOWN		(0x1 << 12)
-#define BM_PLL_LOCK			(0x1 << 31)
-#define BP_PLL_SYS_DIV_SELECT		0
-#define BM_PLL_SYS_DIV_SELECT		(0x7f << 0)
-#define BP_PLL_BUS_DIV_SELECT		0
-#define BM_PLL_BUS_DIV_SELECT		(0x1 << 0)
-#define BP_PLL_USB_DIV_SELECT		0
-#define BM_PLL_USB_DIV_SELECT		(0x3 << 0)
-#define BP_PLL_AV_DIV_SELECT		0
-#define BM_PLL_AV_DIV_SELECT		(0x7f << 0)
-#define BP_PLL_ENET_DIV_SELECT		0
-#define BM_PLL_ENET_DIV_SELECT		(0x3 << 0)
-#define BM_PLL_ENET_EN_PCIE		(0x1 << 19)
-#define BM_PLL_ENET_EN_SATA		(0x1 << 20)
-
-#define CCM_BASE	IMX_IO_ADDRESS(MX6Q_CCM_BASE_ADDR)
-#define CCR		(CCM_BASE + 0x00)
-#define CCDR		(CCM_BASE + 0x04)
-#define CSR		(CCM_BASE + 0x08)
-#define CCSR		(CCM_BASE + 0x0c)
-#define CACRR		(CCM_BASE + 0x10)
-#define CBCDR		(CCM_BASE + 0x14)
-#define CBCMR		(CCM_BASE + 0x18)
-#define CSCMR1		(CCM_BASE + 0x1c)
-#define CSCMR2		(CCM_BASE + 0x20)
-#define CSCDR1		(CCM_BASE + 0x24)
-#define CS1CDR		(CCM_BASE + 0x28)
-#define CS2CDR		(CCM_BASE + 0x2c)
-#define CDCDR		(CCM_BASE + 0x30)
-#define CHSCCDR		(CCM_BASE + 0x34)
-#define CSCDR2		(CCM_BASE + 0x38)
-#define CSCDR3		(CCM_BASE + 0x3c)
-#define CSCDR4		(CCM_BASE + 0x40)
-#define CWDR		(CCM_BASE + 0x44)
-#define CDHIPR		(CCM_BASE + 0x48)
-#define CDCR		(CCM_BASE + 0x4c)
-#define CTOR		(CCM_BASE + 0x50)
-#define CLPCR		(CCM_BASE + 0x54)
-#define CISR		(CCM_BASE + 0x58)
-#define CIMR		(CCM_BASE + 0x5c)
-#define CCOSR		(CCM_BASE + 0x60)
-#define CGPR		(CCM_BASE + 0x64)
-#define CCGR0		(CCM_BASE + 0x68)
-#define CCGR1		(CCM_BASE + 0x6c)
-#define CCGR2		(CCM_BASE + 0x70)
-#define CCGR3		(CCM_BASE + 0x74)
-#define CCGR4		(CCM_BASE + 0x78)
-#define CCGR5		(CCM_BASE + 0x7c)
-#define CCGR6		(CCM_BASE + 0x80)
-#define CCGR7		(CCM_BASE + 0x84)
-#define CMEOR		(CCM_BASE + 0x88)
-
-#define CG0		0
-#define CG1		2
-#define CG2		4
-#define CG3		6
-#define CG4		8
-#define CG5		10
-#define CG6		12
-#define CG7		14
-#define CG8		16
-#define CG9		18
-#define CG10		20
-#define CG11		22
-#define CG12		24
-#define CG13		26
-#define CG14		28
-#define CG15		30
-
-#define BM_CCSR_PLL1_SW_SEL		(0x1 << 2)
-#define BM_CCSR_STEP_SEL		(0x1 << 8)
-
-#define BP_CACRR_ARM_PODF		0
-#define BM_CACRR_ARM_PODF		(0x7 << 0)
-
-#define BP_CBCDR_PERIPH2_CLK2_PODF	0
-#define BM_CBCDR_PERIPH2_CLK2_PODF	(0x7 << 0)
-#define BP_CBCDR_MMDC_CH1_AXI_PODF	3
-#define BM_CBCDR_MMDC_CH1_AXI_PODF	(0x7 << 3)
-#define BP_CBCDR_AXI_SEL		6
-#define BM_CBCDR_AXI_SEL		(0x3 << 6)
-#define BP_CBCDR_IPG_PODF		8
-#define BM_CBCDR_IPG_PODF		(0x3 << 8)
-#define BP_CBCDR_AHB_PODF		10
-#define BM_CBCDR_AHB_PODF		(0x7 << 10)
-#define BP_CBCDR_AXI_PODF		16
-#define BM_CBCDR_AXI_PODF		(0x7 << 16)
-#define BP_CBCDR_MMDC_CH0_AXI_PODF	19
-#define BM_CBCDR_MMDC_CH0_AXI_PODF	(0x7 << 19)
-#define BP_CBCDR_PERIPH_CLK_SEL		25
-#define BM_CBCDR_PERIPH_CLK_SEL		(0x1 << 25)
-#define BP_CBCDR_PERIPH2_CLK_SEL	26
-#define BM_CBCDR_PERIPH2_CLK_SEL	(0x1 << 26)
-#define BP_CBCDR_PERIPH_CLK2_PODF	27
-#define BM_CBCDR_PERIPH_CLK2_PODF	(0x7 << 27)
-
-#define BP_CBCMR_GPU2D_AXI_SEL		0
-#define BM_CBCMR_GPU2D_AXI_SEL		(0x1 << 0)
-#define BP_CBCMR_GPU3D_AXI_SEL		1
-#define BM_CBCMR_GPU3D_AXI_SEL		(0x1 << 1)
-#define BP_CBCMR_GPU3D_CORE_SEL		4
-#define BM_CBCMR_GPU3D_CORE_SEL		(0x3 << 4)
-#define BP_CBCMR_GPU3D_SHADER_SEL	8
-#define BM_CBCMR_GPU3D_SHADER_SEL	(0x3 << 8)
-#define BP_CBCMR_PCIE_AXI_SEL		10
-#define BM_CBCMR_PCIE_AXI_SEL		(0x1 << 10)
-#define BP_CBCMR_VDO_AXI_SEL		11
-#define BM_CBCMR_VDO_AXI_SEL		(0x1 << 11)
-#define BP_CBCMR_PERIPH_CLK2_SEL	12
-#define BM_CBCMR_PERIPH_CLK2_SEL	(0x3 << 12)
-#define BP_CBCMR_VPU_AXI_SEL		14
-#define BM_CBCMR_VPU_AXI_SEL		(0x3 << 14)
-#define BP_CBCMR_GPU2D_CORE_SEL		16
-#define BM_CBCMR_GPU2D_CORE_SEL		(0x3 << 16)
-#define BP_CBCMR_PRE_PERIPH_CLK_SEL	18
-#define BM_CBCMR_PRE_PERIPH_CLK_SEL	(0x3 << 18)
-#define BP_CBCMR_PERIPH2_CLK2_SEL	20
-#define BM_CBCMR_PERIPH2_CLK2_SEL	(0x1 << 20)
-#define BP_CBCMR_PRE_PERIPH2_CLK_SEL	21
-#define BM_CBCMR_PRE_PERIPH2_CLK_SEL	(0x3 << 21)
-#define BP_CBCMR_GPU2D_CORE_PODF	23
-#define BM_CBCMR_GPU2D_CORE_PODF	(0x7 << 23)
-#define BP_CBCMR_GPU3D_CORE_PODF	26
-#define BM_CBCMR_GPU3D_CORE_PODF	(0x7 << 26)
-#define BP_CBCMR_GPU3D_SHADER_PODF	29
-#define BM_CBCMR_GPU3D_SHADER_PODF	(0x7 << 29)
-
-#define BP_CSCMR1_PERCLK_PODF		0
-#define BM_CSCMR1_PERCLK_PODF		(0x3f << 0)
-#define BP_CSCMR1_SSI1_SEL		10
-#define BM_CSCMR1_SSI1_SEL		(0x3 << 10)
-#define BP_CSCMR1_SSI2_SEL		12
-#define BM_CSCMR1_SSI2_SEL		(0x3 << 12)
-#define BP_CSCMR1_SSI3_SEL		14
-#define BM_CSCMR1_SSI3_SEL		(0x3 << 14)
-#define BP_CSCMR1_USDHC1_SEL		16
-#define BM_CSCMR1_USDHC1_SEL		(0x1 << 16)
-#define BP_CSCMR1_USDHC2_SEL		17
-#define BM_CSCMR1_USDHC2_SEL		(0x1 << 17)
-#define BP_CSCMR1_USDHC3_SEL		18
-#define BM_CSCMR1_USDHC3_SEL		(0x1 << 18)
-#define BP_CSCMR1_USDHC4_SEL		19
-#define BM_CSCMR1_USDHC4_SEL		(0x1 << 19)
-#define BP_CSCMR1_EMI_PODF		20
-#define BM_CSCMR1_EMI_PODF		(0x7 << 20)
-#define BP_CSCMR1_EMI_SLOW_PODF		23
-#define BM_CSCMR1_EMI_SLOW_PODF		(0x7 << 23)
-#define BP_CSCMR1_EMI_SEL		27
-#define BM_CSCMR1_EMI_SEL		(0x3 << 27)
-#define BP_CSCMR1_EMI_SLOW_SEL		29
-#define BM_CSCMR1_EMI_SLOW_SEL		(0x3 << 29)
-
-#define BP_CSCMR2_CAN_PODF		2
-#define BM_CSCMR2_CAN_PODF		(0x3f << 2)
-#define BM_CSCMR2_LDB_DI0_IPU_DIV	(0x1 << 10)
-#define BM_CSCMR2_LDB_DI1_IPU_DIV	(0x1 << 11)
-#define BP_CSCMR2_ESAI_SEL		19
-#define BM_CSCMR2_ESAI_SEL		(0x3 << 19)
-
-#define BP_CSCDR1_UART_PODF		0
-#define BM_CSCDR1_UART_PODF		(0x3f << 0)
-#define BP_CSCDR1_USDHC1_PODF		11
-#define BM_CSCDR1_USDHC1_PODF		(0x7 << 11)
-#define BP_CSCDR1_USDHC2_PODF		16
-#define BM_CSCDR1_USDHC2_PODF		(0x7 << 16)
-#define BP_CSCDR1_USDHC3_PODF		19
-#define BM_CSCDR1_USDHC3_PODF		(0x7 << 19)
-#define BP_CSCDR1_USDHC4_PODF		22
-#define BM_CSCDR1_USDHC4_PODF		(0x7 << 22)
-#define BP_CSCDR1_VPU_AXI_PODF		25
-#define BM_CSCDR1_VPU_AXI_PODF		(0x7 << 25)
-
-#define BP_CS1CDR_SSI1_PODF		0
-#define BM_CS1CDR_SSI1_PODF		(0x3f << 0)
-#define BP_CS1CDR_SSI1_PRED		6
-#define BM_CS1CDR_SSI1_PRED		(0x7 << 6)
-#define BP_CS1CDR_ESAI_PRED		9
-#define BM_CS1CDR_ESAI_PRED		(0x7 << 9)
-#define BP_CS1CDR_SSI3_PODF		16
-#define BM_CS1CDR_SSI3_PODF		(0x3f << 16)
-#define BP_CS1CDR_SSI3_PRED		22
-#define BM_CS1CDR_SSI3_PRED		(0x7 << 22)
-#define BP_CS1CDR_ESAI_PODF		25
-#define BM_CS1CDR_ESAI_PODF		(0x7 << 25)
-
-#define BP_CS2CDR_SSI2_PODF		0
-#define BM_CS2CDR_SSI2_PODF		(0x3f << 0)
-#define BP_CS2CDR_SSI2_PRED		6
-#define BM_CS2CDR_SSI2_PRED		(0x7 << 6)
-#define BP_CS2CDR_LDB_DI0_SEL		9
-#define BM_CS2CDR_LDB_DI0_SEL		(0x7 << 9)
-#define BP_CS2CDR_LDB_DI1_SEL		12
-#define BM_CS2CDR_LDB_DI1_SEL		(0x7 << 12)
-#define BP_CS2CDR_ENFC_SEL		16
-#define BM_CS2CDR_ENFC_SEL		(0x3 << 16)
-#define BP_CS2CDR_ENFC_PRED		18
-#define BM_CS2CDR_ENFC_PRED		(0x7 << 18)
-#define BP_CS2CDR_ENFC_PODF		21
-#define BM_CS2CDR_ENFC_PODF		(0x3f << 21)
-
-#define BP_CDCDR_ASRC_SERIAL_SEL	7
-#define BM_CDCDR_ASRC_SERIAL_SEL	(0x3 << 7)
-#define BP_CDCDR_ASRC_SERIAL_PODF	9
-#define BM_CDCDR_ASRC_SERIAL_PODF	(0x7 << 9)
-#define BP_CDCDR_ASRC_SERIAL_PRED	12
-#define BM_CDCDR_ASRC_SERIAL_PRED	(0x7 << 12)
-#define BP_CDCDR_SPDIF_SEL		20
-#define BM_CDCDR_SPDIF_SEL		(0x3 << 20)
-#define BP_CDCDR_SPDIF_PODF		22
-#define BM_CDCDR_SPDIF_PODF		(0x7 << 22)
-#define BP_CDCDR_SPDIF_PRED		25
-#define BM_CDCDR_SPDIF_PRED		(0x7 << 25)
-#define BP_CDCDR_HSI_TX_PODF		29
-#define BM_CDCDR_HSI_TX_PODF		(0x7 << 29)
-#define BP_CDCDR_HSI_TX_SEL		28
-#define BM_CDCDR_HSI_TX_SEL		(0x1 << 28)
-
-#define BP_CHSCCDR_IPU1_DI0_SEL		0
-#define BM_CHSCCDR_IPU1_DI0_SEL		(0x7 << 0)
-#define BP_CHSCCDR_IPU1_DI0_PRE_PODF	3
-#define BM_CHSCCDR_IPU1_DI0_PRE_PODF	(0x7 << 3)
-#define BP_CHSCCDR_IPU1_DI0_PRE_SEL	6
-#define BM_CHSCCDR_IPU1_DI0_PRE_SEL	(0x7 << 6)
-#define BP_CHSCCDR_IPU1_DI1_SEL		9
-#define BM_CHSCCDR_IPU1_DI1_SEL		(0x7 << 9)
-#define BP_CHSCCDR_IPU1_DI1_PRE_PODF	12
-#define BM_CHSCCDR_IPU1_DI1_PRE_PODF	(0x7 << 12)
-#define BP_CHSCCDR_IPU1_DI1_PRE_SEL	15
-#define BM_CHSCCDR_IPU1_DI1_PRE_SEL	(0x7 << 15)
-
-#define BP_CSCDR2_IPU2_DI0_SEL		0
-#define BM_CSCDR2_IPU2_DI0_SEL		(0x7)
-#define BP_CSCDR2_IPU2_DI0_PRE_PODF	3
-#define BM_CSCDR2_IPU2_DI0_PRE_PODF	(0x7 << 3)
-#define BP_CSCDR2_IPU2_DI0_PRE_SEL	6
-#define BM_CSCDR2_IPU2_DI0_PRE_SEL	(0x7 << 6)
-#define BP_CSCDR2_IPU2_DI1_SEL		9
-#define BM_CSCDR2_IPU2_DI1_SEL		(0x7 << 9)
-#define BP_CSCDR2_IPU2_DI1_PRE_PODF	12
-#define BM_CSCDR2_IPU2_DI1_PRE_PODF	(0x7 << 12)
-#define BP_CSCDR2_IPU2_DI1_PRE_SEL	15
-#define BM_CSCDR2_IPU2_DI1_PRE_SEL	(0x7 << 15)
-#define BP_CSCDR2_ECSPI_CLK_PODF	19
-#define BM_CSCDR2_ECSPI_CLK_PODF	(0x3f << 19)
-
-#define BP_CSCDR3_IPU1_HSP_SEL		9
-#define BM_CSCDR3_IPU1_HSP_SEL		(0x3 << 9)
-#define BP_CSCDR3_IPU1_HSP_PODF		11
-#define BM_CSCDR3_IPU1_HSP_PODF		(0x7 << 11)
-#define BP_CSCDR3_IPU2_HSP_SEL		14
-#define BM_CSCDR3_IPU2_HSP_SEL		(0x3 << 14)
-#define BP_CSCDR3_IPU2_HSP_PODF		16
-#define BM_CSCDR3_IPU2_HSP_PODF		(0x7 << 16)
-
-#define BM_CDHIPR_AXI_PODF_BUSY		(0x1 << 0)
-#define BM_CDHIPR_AHB_PODF_BUSY		(0x1 << 1)
-#define BM_CDHIPR_MMDC_CH1_PODF_BUSY	(0x1 << 2)
-#define BM_CDHIPR_PERIPH2_SEL_BUSY	(0x1 << 3)
-#define BM_CDHIPR_MMDC_CH0_PODF_BUSY	(0x1 << 4)
-#define BM_CDHIPR_PERIPH_SEL_BUSY	(0x1 << 5)
-#define BM_CDHIPR_ARM_PODF_BUSY		(0x1 << 16)
-
-#define BP_CLPCR_LPM			0
-#define BM_CLPCR_LPM			(0x3 << 0)
-#define BM_CLPCR_BYPASS_PMIC_READY	(0x1 << 2)
-#define BM_CLPCR_ARM_CLK_DIS_ON_LPM	(0x1 << 5)
-#define BM_CLPCR_SBYOS			(0x1 << 6)
-#define BM_CLPCR_DIS_REF_OSC		(0x1 << 7)
-#define BM_CLPCR_VSTBY			(0x1 << 8)
-#define BP_CLPCR_STBY_COUNT		9
-#define BM_CLPCR_STBY_COUNT		(0x3 << 9)
-#define BM_CLPCR_COSC_PWRDOWN		(0x1 << 11)
-#define BM_CLPCR_WB_PER_AT_LPM		(0x1 << 16)
-#define BM_CLPCR_WB_CORE_AT_LPM		(0x1 << 17)
-#define BM_CLPCR_BYP_MMDC_CH0_LPM_HS	(0x1 << 19)
-#define BM_CLPCR_BYP_MMDC_CH1_LPM_HS	(0x1 << 21)
-#define BM_CLPCR_MASK_CORE0_WFI		(0x1 << 22)
-#define BM_CLPCR_MASK_CORE1_WFI		(0x1 << 23)
-#define BM_CLPCR_MASK_CORE2_WFI		(0x1 << 24)
-#define BM_CLPCR_MASK_CORE3_WFI		(0x1 << 25)
-#define BM_CLPCR_MASK_SCU_IDLE		(0x1 << 26)
-#define BM_CLPCR_MASK_L2CC_IDLE		(0x1 << 27)
-
-#define BP_CCOSR_CKO1_EN		7
-#define BP_CCOSR_CKO1_PODF		4
-#define BM_CCOSR_CKO1_PODF		(0x7 << 4)
-#define BP_CCOSR_CKO1_SEL		0
-#define BM_CCOSR_CKO1_SEL		(0xf << 0)
-
-#define FREQ_480M	480000000
-#define FREQ_528M	528000000
-#define FREQ_594M	594000000
-#define FREQ_650M	650000000
-#define FREQ_1300M	1300000000
-
-static struct clk pll1_sys;
-static struct clk pll2_bus;
-static struct clk pll3_usb_otg;
-static struct clk pll4_audio;
-static struct clk pll5_video;
-static struct clk pll6_mlb;
-static struct clk pll7_usb_host;
-static struct clk pll8_enet;
-static struct clk apbh_dma_clk;
-static struct clk arm_clk;
-static struct clk ipg_clk;
-static struct clk ahb_clk;
-static struct clk axi_clk;
-static struct clk mmdc_ch0_axi_clk;
-static struct clk mmdc_ch1_axi_clk;
-static struct clk periph_clk;
-static struct clk periph_pre_clk;
-static struct clk periph_clk2_clk;
-static struct clk periph2_clk;
-static struct clk periph2_pre_clk;
-static struct clk periph2_clk2_clk;
-static struct clk gpu2d_core_clk;
-static struct clk gpu3d_core_clk;
-static struct clk gpu3d_shader_clk;
-static struct clk ipg_perclk;
-static struct clk emi_clk;
-static struct clk emi_slow_clk;
-static struct clk can1_clk;
-static struct clk uart_clk;
-static struct clk usdhc1_clk;
-static struct clk usdhc2_clk;
-static struct clk usdhc3_clk;
-static struct clk usdhc4_clk;
-static struct clk vpu_clk;
-static struct clk hsi_tx_clk;
-static struct clk ipu1_di0_pre_clk;
-static struct clk ipu1_di1_pre_clk;
-static struct clk ipu2_di0_pre_clk;
-static struct clk ipu2_di1_pre_clk;
-static struct clk ipu1_clk;
-static struct clk ipu2_clk;
-static struct clk ssi1_clk;
-static struct clk ssi3_clk;
-static struct clk esai_clk;
-static struct clk ssi2_clk;
-static struct clk spdif_clk;
-static struct clk asrc_serial_clk;
-static struct clk gpu2d_axi_clk;
-static struct clk gpu3d_axi_clk;
-static struct clk pcie_clk;
-static struct clk vdo_axi_clk;
-static struct clk ldb_di0_clk;
-static struct clk ldb_di1_clk;
-static struct clk ipu1_di0_clk;
-static struct clk ipu1_di1_clk;
-static struct clk ipu2_di0_clk;
-static struct clk ipu2_di1_clk;
-static struct clk enfc_clk;
-static struct clk cko1_clk;
-static struct clk dummy_clk = {};
-
-static unsigned long external_high_reference;
-static unsigned long external_low_reference;
-static unsigned long oscillator_reference;
-
-static unsigned long get_oscillator_reference_clock_rate(struct clk *clk)
-{
-	return oscillator_reference;
-}
-
-static unsigned long get_high_reference_clock_rate(struct clk *clk)
-{
-	return external_high_reference;
-}
-
-static unsigned long get_low_reference_clock_rate(struct clk *clk)
-{
-	return external_low_reference;
-}
-
-static struct clk ckil_clk = {
-	.get_rate = get_low_reference_clock_rate,
-};
-
-static struct clk ckih_clk = {
-	.get_rate = get_high_reference_clock_rate,
-};
-
-static struct clk osc_clk = {
-	.get_rate = get_oscillator_reference_clock_rate,
-};
-
-static inline void __iomem *pll_get_reg_addr(struct clk *pll)
-{
-	if (pll == &pll1_sys)
-		return PLL1_SYS;
-	else if (pll == &pll2_bus)
-		return PLL2_BUS;
-	else if (pll == &pll3_usb_otg)
-		return PLL3_USB_OTG;
-	else if (pll == &pll4_audio)
-		return PLL4_AUDIO;
-	else if (pll == &pll5_video)
-		return PLL5_VIDEO;
-	else if (pll == &pll6_mlb)
-		return PLL6_MLB;
-	else if (pll == &pll7_usb_host)
-		return PLL7_USB_HOST;
-	else if (pll == &pll8_enet)
-		return PLL8_ENET;
-	else
-		BUG();
-
-	return NULL;
-}
-
-static int pll_enable(struct clk *clk)
-{
-	int timeout = 0x100000;
-	void __iomem *reg;
-	u32 val;
-
-	reg = pll_get_reg_addr(clk);
-	val = readl_relaxed(reg);
-	val &= ~BM_PLL_BYPASS;
-	val &= ~BM_PLL_POWER_DOWN;
-	/* 480MHz PLLs have the opposite definition for power bit */
-	if (clk == &pll3_usb_otg || clk == &pll7_usb_host)
-		val |= BM_PLL_POWER_DOWN;
-	writel_relaxed(val, reg);
-
-	/* Wait for PLL to lock */
-	while (!(readl_relaxed(reg) & BM_PLL_LOCK) && --timeout)
-		cpu_relax();
-
-	if (unlikely(!timeout))
-		return -EBUSY;
-
-	/* Enable the PLL output now */
-	val = readl_relaxed(reg);
-	val |= BM_PLL_ENABLE;
-	writel_relaxed(val, reg);
-
-	return 0;
-}
-
-static void pll_disable(struct clk *clk)
-{
-	void __iomem *reg;
-	u32 val;
-
-	reg = pll_get_reg_addr(clk);
-	val = readl_relaxed(reg);
-	val &= ~BM_PLL_ENABLE;
-	val |= BM_PLL_BYPASS;
-	val |= BM_PLL_POWER_DOWN;
-	if (clk == &pll3_usb_otg || clk == &pll7_usb_host)
-		val &= ~BM_PLL_POWER_DOWN;
-	writel_relaxed(val, reg);
-}
-
-static unsigned long pll1_sys_get_rate(struct clk *clk)
-{
-	u32 div = (readl_relaxed(PLL1_SYS) & BM_PLL_SYS_DIV_SELECT) >>
-		  BP_PLL_SYS_DIV_SELECT;
-
-	return clk_get_rate(clk->parent) * div / 2;
-}
-
-static int pll1_sys_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 val, div;
-
-	if (rate < FREQ_650M || rate > FREQ_1300M)
-		return -EINVAL;
-
-	div = rate * 2 / clk_get_rate(clk->parent);
-	val = readl_relaxed(PLL1_SYS);
-	val &= ~BM_PLL_SYS_DIV_SELECT;
-	val |= div << BP_PLL_SYS_DIV_SELECT;
-	writel_relaxed(val, PLL1_SYS);
-
-	return 0;
-}
-
-static unsigned long pll8_enet_get_rate(struct clk *clk)
-{
-	u32 div = (readl_relaxed(PLL8_ENET) & BM_PLL_ENET_DIV_SELECT) >>
-		  BP_PLL_ENET_DIV_SELECT;
-
-	switch (div) {
-	case 0:
-		return 25000000;
-	case 1:
-		return 50000000;
-	case 2:
-		return 100000000;
-	case 3:
-		return 125000000;
-	}
-
-	return 0;
-}
-
-static int pll8_enet_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 val, div;
-
-	switch (rate) {
-	case 25000000:
-		div = 0;
-		break;
-	case 50000000:
-		div = 1;
-		break;
-	case 100000000:
-		div = 2;
-		break;
-	case 125000000:
-		div = 3;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	val = readl_relaxed(PLL8_ENET);
-	val &= ~BM_PLL_ENET_DIV_SELECT;
-	val |= div << BP_PLL_ENET_DIV_SELECT;
-	writel_relaxed(val, PLL8_ENET);
-
-	return 0;
-}
-
-static unsigned long pll_av_get_rate(struct clk *clk)
-{
-	void __iomem *reg = (clk == &pll4_audio) ? PLL4_AUDIO : PLL5_VIDEO;
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	u32 mfn = readl_relaxed(reg + PLL_NUM_OFFSET);
-	u32 mfd = readl_relaxed(reg + PLL_DENOM_OFFSET);
-	u32 div = (readl_relaxed(reg) & BM_PLL_AV_DIV_SELECT) >>
-		  BP_PLL_AV_DIV_SELECT;
-
-	return (parent_rate * div) + ((parent_rate / mfd) * mfn);
-}
-
-static int pll_av_set_rate(struct clk *clk, unsigned long rate)
-{
-	void __iomem *reg = (clk == &pll4_audio) ? PLL4_AUDIO : PLL5_VIDEO;
-	unsigned int parent_rate = clk_get_rate(clk->parent);
-	u32 val, div;
-	u32 mfn, mfd = 1000000;
-	s64 temp64;
-
-	if (rate < FREQ_650M || rate > FREQ_1300M)
-		return -EINVAL;
-
-	div = rate / parent_rate;
-	temp64 = (u64) (rate - div * parent_rate);
-	temp64 *= mfd;
-	do_div(temp64, parent_rate);
-	mfn = temp64;
-
-	val = readl_relaxed(reg);
-	val &= ~BM_PLL_AV_DIV_SELECT;
-	val |= div << BP_PLL_AV_DIV_SELECT;
-	writel_relaxed(val, reg);
-	writel_relaxed(mfn, reg + PLL_NUM_OFFSET);
-	writel_relaxed(mfd, reg + PLL_DENOM_OFFSET);
-
-	return 0;
-}
-
-static void __iomem *pll_get_div_reg_bit(struct clk *clk, u32 *bp, u32 *bm)
-{
-	void __iomem *reg;
-
-	if (clk == &pll2_bus) {
-		reg = PLL2_BUS;
-		*bp = BP_PLL_BUS_DIV_SELECT;
-		*bm = BM_PLL_BUS_DIV_SELECT;
-	} else if (clk == &pll3_usb_otg) {
-		reg = PLL3_USB_OTG;
-		*bp = BP_PLL_USB_DIV_SELECT;
-		*bm = BM_PLL_USB_DIV_SELECT;
-	} else if (clk == &pll7_usb_host) {
-		reg = PLL7_USB_HOST;
-		*bp = BP_PLL_USB_DIV_SELECT;
-		*bm = BM_PLL_USB_DIV_SELECT;
-	} else {
-		BUG();
-	}
-
-	return reg;
-}
-
-static unsigned long pll_get_rate(struct clk *clk)
-{
-	void __iomem *reg;
-	u32 div, bp, bm;
-
-	reg = pll_get_div_reg_bit(clk, &bp, &bm);
-	div = (readl_relaxed(reg) & bm) >> bp;
-
-	return (div == 1) ? clk_get_rate(clk->parent) * 22 :
-			    clk_get_rate(clk->parent) * 20;
-}
-
-static int pll_set_rate(struct clk *clk, unsigned long rate)
-{
-	void __iomem *reg;
-	u32 val, div, bp, bm;
-
-	if (rate == FREQ_528M)
-		div = 1;
-	else if (rate == FREQ_480M)
-		div = 0;
-	else
-		return -EINVAL;
-
-	reg = pll_get_div_reg_bit(clk, &bp, &bm);
-	val = readl_relaxed(reg);
-	val &= ~bm;
-	val |= div << bp;
-	writel_relaxed(val, reg);
-
-	return 0;
-}
-
-#define pll2_bus_get_rate	pll_get_rate
-#define pll2_bus_set_rate	pll_set_rate
-#define pll3_usb_otg_get_rate	pll_get_rate
-#define pll3_usb_otg_set_rate	pll_set_rate
-#define pll7_usb_host_get_rate	pll_get_rate
-#define pll7_usb_host_set_rate	pll_set_rate
-#define pll4_audio_get_rate	pll_av_get_rate
-#define pll4_audio_set_rate	pll_av_set_rate
-#define pll5_video_get_rate	pll_av_get_rate
-#define pll5_video_set_rate	pll_av_set_rate
-#define pll6_mlb_get_rate	NULL
-#define pll6_mlb_set_rate	NULL
-
-#define DEF_PLL(name)					\
-	static struct clk name = {			\
-		.enable		= pll_enable,		\
-		.disable	= pll_disable,		\
-		.get_rate	= name##_get_rate,	\
-		.set_rate	= name##_set_rate,	\
-		.parent		= &osc_clk,		\
-	}
-
-DEF_PLL(pll1_sys);
-DEF_PLL(pll2_bus);
-DEF_PLL(pll3_usb_otg);
-DEF_PLL(pll4_audio);
-DEF_PLL(pll5_video);
-DEF_PLL(pll6_mlb);
-DEF_PLL(pll7_usb_host);
-DEF_PLL(pll8_enet);
-
-static unsigned long pfd_get_rate(struct clk *clk)
-{
-	u64 tmp = (u64) clk_get_rate(clk->parent) * 18;
-	u32 frac, bp_frac;
-
-	if (apbh_dma_clk.usecount == 0)
-		apbh_dma_clk.enable(&apbh_dma_clk);
-
-	bp_frac = clk->enable_shift - 7;
-	frac = readl_relaxed(clk->enable_reg) >> bp_frac & PFD_FRAC_MASK;
-	do_div(tmp, frac);
-
-	return tmp;
-}
-
-static int pfd_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 val, frac, bp_frac;
-	u64 tmp = (u64) clk_get_rate(clk->parent) * 18;
-
-	if (apbh_dma_clk.usecount == 0)
-		apbh_dma_clk.enable(&apbh_dma_clk);
-
-	/*
-	 * Round up the divider so that we don't set a rate
-	 * higher than what is requested
-	 */
-	tmp += rate / 2;
-	do_div(tmp, rate);
-	frac = tmp;
-	frac = (frac < 12) ? 12 : frac;
-	frac = (frac > 35) ? 35 : frac;
-
-	/*
-	 * The frac field always starts from 7 bits lower
-	 * position of enable bit
-	 */
-	bp_frac = clk->enable_shift - 7;
-	val = readl_relaxed(clk->enable_reg);
-	val &= ~(PFD_FRAC_MASK << bp_frac);
-	val |= frac << bp_frac;
-	writel_relaxed(val, clk->enable_reg);
-
-	tmp = (u64) clk_get_rate(clk->parent) * 18;
-	do_div(tmp, frac);
-
-	if (apbh_dma_clk.usecount == 0)
-		apbh_dma_clk.disable(&apbh_dma_clk);
-
-	return 0;
-}
-
-static unsigned long pfd_round_rate(struct clk *clk, unsigned long rate)
-{
-	u32 frac;
-	u64 tmp;
-
-	tmp = (u64) clk_get_rate(clk->parent) * 18;
-	tmp += rate / 2;
-	do_div(tmp, rate);
-	frac = tmp;
-	frac = (frac < 12) ? 12 : frac;
-	frac = (frac > 35) ? 35 : frac;
-	tmp = (u64) clk_get_rate(clk->parent) * 18;
-	do_div(tmp, frac);
-
-	return tmp;
-}
-
-static int pfd_enable(struct clk *clk)
-{
-	u32 val;
-
-	if (apbh_dma_clk.usecount == 0)
-		apbh_dma_clk.enable(&apbh_dma_clk);
-
-	val = readl_relaxed(clk->enable_reg);
-	val &= ~(1 << clk->enable_shift);
-	writel_relaxed(val, clk->enable_reg);
-
-	if (apbh_dma_clk.usecount == 0)
-		apbh_dma_clk.disable(&apbh_dma_clk);
-
-	return 0;
-}
-
-static void pfd_disable(struct clk *clk)
-{
-	u32 val;
-
-	if (apbh_dma_clk.usecount == 0)
-		apbh_dma_clk.enable(&apbh_dma_clk);
-
-	val = readl_relaxed(clk->enable_reg);
-	val |= 1 << clk->enable_shift;
-	writel_relaxed(val, clk->enable_reg);
-
-	if (apbh_dma_clk.usecount == 0)
-		apbh_dma_clk.disable(&apbh_dma_clk);
-}
-
-#define DEF_PFD(name, er, es, p)			\
-	static struct clk name = {			\
-		.enable_reg	= er,			\
-		.enable_shift	= es,			\
-		.enable		= pfd_enable,		\
-		.disable	= pfd_disable,		\
-		.get_rate	= pfd_get_rate,		\
-		.set_rate	= pfd_set_rate,		\
-		.round_rate	= pfd_round_rate,	\
-		.parent		= p,			\
-	}
-
-DEF_PFD(pll2_pfd_352m, PFD_528, PFD0, &pll2_bus);
-DEF_PFD(pll2_pfd_594m, PFD_528, PFD1, &pll2_bus);
-DEF_PFD(pll2_pfd_400m, PFD_528, PFD2, &pll2_bus);
-DEF_PFD(pll3_pfd_720m, PFD_480, PFD0, &pll3_usb_otg);
-DEF_PFD(pll3_pfd_540m, PFD_480, PFD1, &pll3_usb_otg);
-DEF_PFD(pll3_pfd_508m, PFD_480, PFD2, &pll3_usb_otg);
-DEF_PFD(pll3_pfd_454m, PFD_480, PFD3, &pll3_usb_otg);
-
-static unsigned long twd_clk_get_rate(struct clk *clk)
-{
-	return clk_get_rate(clk->parent) / 2;
-}
-
-static struct clk twd_clk = {
-	.parent = &arm_clk,
-	.get_rate = twd_clk_get_rate,
-};
-
-static unsigned long pll2_200m_get_rate(struct clk *clk)
-{
-	return clk_get_rate(clk->parent) / 2;
-}
-
-static struct clk pll2_200m = {
-	.parent = &pll2_pfd_400m,
-	.get_rate = pll2_200m_get_rate,
-};
-
-static unsigned long pll3_120m_get_rate(struct clk *clk)
-{
-	return clk_get_rate(clk->parent) / 4;
-}
-
-static struct clk pll3_120m = {
-	.parent = &pll3_usb_otg,
-	.get_rate = pll3_120m_get_rate,
-};
-
-static unsigned long pll3_80m_get_rate(struct clk *clk)
-{
-	return clk_get_rate(clk->parent) / 6;
-}
-
-static struct clk pll3_80m = {
-	.parent = &pll3_usb_otg,
-	.get_rate = pll3_80m_get_rate,
-};
-
-static unsigned long pll3_60m_get_rate(struct clk *clk)
-{
-	return clk_get_rate(clk->parent) / 8;
-}
-
-static struct clk pll3_60m = {
-	.parent = &pll3_usb_otg,
-	.get_rate = pll3_60m_get_rate,
-};
-
-static int pll1_sw_clk_set_parent(struct clk *clk, struct clk *parent)
-{
-	u32 val = readl_relaxed(CCSR);
-
-	if (parent == &pll1_sys) {
-		val &= ~BM_CCSR_PLL1_SW_SEL;
-		val &= ~BM_CCSR_STEP_SEL;
-	} else if (parent == &osc_clk) {
-		val |= BM_CCSR_PLL1_SW_SEL;
-		val &= ~BM_CCSR_STEP_SEL;
-	} else if (parent == &pll2_pfd_400m) {
-		val |= BM_CCSR_PLL1_SW_SEL;
-		val |= BM_CCSR_STEP_SEL;
-	} else {
-		return -EINVAL;
-	}
-
-	writel_relaxed(val, CCSR);
-
-	return 0;
-}
-
-static struct clk pll1_sw_clk = {
-	.parent = &pll1_sys,
-	.set_parent = pll1_sw_clk_set_parent,
-};
-
-static void calc_pred_podf_dividers(u32 div, u32 *pred, u32 *podf)
-{
-	u32 min_pred, temp_pred, old_err, err;
-
-	if (div >= 512) {
-		*pred = 8;
-		*podf = 64;
-	} else if (div >= 8) {
-		min_pred = (div - 1) / 64 + 1;
-		old_err = 8;
-		for (temp_pred = 8; temp_pred >= min_pred; temp_pred--) {
-			err = div % temp_pred;
-			if (err == 0) {
-				*pred = temp_pred;
-				break;
-			}
-			err = temp_pred - err;
-			if (err < old_err) {
-				old_err = err;
-				*pred = temp_pred;
-			}
-		}
-		*podf = (div + *pred - 1) / *pred;
-	} else if (div < 8) {
-		*pred = div;
-		*podf = 1;
-	}
-}
-
-static int _clk_enable(struct clk *clk)
-{
-	u32 reg;
-	reg = readl_relaxed(clk->enable_reg);
-	reg |= 0x3 << clk->enable_shift;
-	writel_relaxed(reg, clk->enable_reg);
-
-	return 0;
-}
-
-static void _clk_disable(struct clk *clk)
-{
-	u32 reg;
-	reg = readl_relaxed(clk->enable_reg);
-	reg &= ~(0x3 << clk->enable_shift);
-	writel_relaxed(reg, clk->enable_reg);
-}
-
-static int _clk_enable_1b(struct clk *clk)
-{
-	u32 reg;
-	reg = readl_relaxed(clk->enable_reg);
-	reg |= 0x1 << clk->enable_shift;
-	writel_relaxed(reg, clk->enable_reg);
-
-	return 0;
-}
-
-static void _clk_disable_1b(struct clk *clk)
-{
-	u32 reg;
-	reg = readl_relaxed(clk->enable_reg);
-	reg &= ~(0x1 << clk->enable_shift);
-	writel_relaxed(reg, clk->enable_reg);
-}
-
-struct divider {
-	struct clk *clk;
-	void __iomem *reg;
-	u32 bp_pred;
-	u32 bm_pred;
-	u32 bp_podf;
-	u32 bm_podf;
-};
-
-#define DEF_CLK_DIV1(d, c, r, b)				\
-	static struct divider d = {				\
-		.clk = c,					\
-		.reg = r,					\
-		.bp_podf = BP_##r##_##b##_PODF,			\
-		.bm_podf = BM_##r##_##b##_PODF,			\
-	}
-
-DEF_CLK_DIV1(arm_div,		&arm_clk,		CACRR,	ARM);
-DEF_CLK_DIV1(ipg_div,		&ipg_clk,		CBCDR,	IPG);
-DEF_CLK_DIV1(ahb_div,		&ahb_clk,		CBCDR,	AHB);
-DEF_CLK_DIV1(axi_div,		&axi_clk,		CBCDR,	AXI);
-DEF_CLK_DIV1(mmdc_ch0_axi_div,	&mmdc_ch0_axi_clk,	CBCDR,	MMDC_CH0_AXI);
-DEF_CLK_DIV1(mmdc_ch1_axi_div,	&mmdc_ch1_axi_clk,	CBCDR,	MMDC_CH1_AXI);
-DEF_CLK_DIV1(periph_clk2_div,	&periph_clk2_clk,	CBCDR,	PERIPH_CLK2);
-DEF_CLK_DIV1(periph2_clk2_div,	&periph2_clk2_clk,	CBCDR,	PERIPH2_CLK2);
-DEF_CLK_DIV1(gpu2d_core_div,	&gpu2d_core_clk,	CBCMR,	GPU2D_CORE);
-DEF_CLK_DIV1(gpu3d_core_div,	&gpu3d_core_clk,	CBCMR,	GPU3D_CORE);
-DEF_CLK_DIV1(gpu3d_shader_div,	&gpu3d_shader_clk,	CBCMR,	GPU3D_SHADER);
-DEF_CLK_DIV1(ipg_perclk_div,	&ipg_perclk,		CSCMR1,	PERCLK);
-DEF_CLK_DIV1(emi_div,		&emi_clk,		CSCMR1,	EMI);
-DEF_CLK_DIV1(emi_slow_div,	&emi_slow_clk,		CSCMR1,	EMI_SLOW);
-DEF_CLK_DIV1(can_div,		&can1_clk,		CSCMR2,	CAN);
-DEF_CLK_DIV1(uart_div,		&uart_clk,		CSCDR1,	UART);
-DEF_CLK_DIV1(usdhc1_div,	&usdhc1_clk,		CSCDR1,	USDHC1);
-DEF_CLK_DIV1(usdhc2_div,	&usdhc2_clk,		CSCDR1,	USDHC2);
-DEF_CLK_DIV1(usdhc3_div,	&usdhc3_clk,		CSCDR1,	USDHC3);
-DEF_CLK_DIV1(usdhc4_div,	&usdhc4_clk,		CSCDR1,	USDHC4);
-DEF_CLK_DIV1(vpu_div,		&vpu_clk,		CSCDR1,	VPU_AXI);
-DEF_CLK_DIV1(hsi_tx_div,	&hsi_tx_clk,		CDCDR,	HSI_TX);
-DEF_CLK_DIV1(ipu1_di0_pre_div,	&ipu1_di0_pre_clk,	CHSCCDR, IPU1_DI0_PRE);
-DEF_CLK_DIV1(ipu1_di1_pre_div,	&ipu1_di1_pre_clk,	CHSCCDR, IPU1_DI1_PRE);
-DEF_CLK_DIV1(ipu2_di0_pre_div,	&ipu2_di0_pre_clk,	CSCDR2,	IPU2_DI0_PRE);
-DEF_CLK_DIV1(ipu2_di1_pre_div,	&ipu2_di1_pre_clk,	CSCDR2,	IPU2_DI1_PRE);
-DEF_CLK_DIV1(ipu1_div,		&ipu1_clk,		CSCDR3,	IPU1_HSP);
-DEF_CLK_DIV1(ipu2_div,		&ipu2_clk,		CSCDR3,	IPU2_HSP);
-DEF_CLK_DIV1(cko1_div,		&cko1_clk,		CCOSR, CKO1);
-
-#define DEF_CLK_DIV2(d, c, r, b)				\
-	static struct divider d = {				\
-		.clk = c,					\
-		.reg = r,					\
-		.bp_pred = BP_##r##_##b##_PRED,			\
-		.bm_pred = BM_##r##_##b##_PRED,			\
-		.bp_podf = BP_##r##_##b##_PODF,			\
-		.bm_podf = BM_##r##_##b##_PODF,			\
-	}
-
-DEF_CLK_DIV2(ssi1_div,		&ssi1_clk,		CS1CDR,	SSI1);
-DEF_CLK_DIV2(ssi3_div,		&ssi3_clk,		CS1CDR,	SSI3);
-DEF_CLK_DIV2(esai_div,		&esai_clk,		CS1CDR,	ESAI);
-DEF_CLK_DIV2(ssi2_div,		&ssi2_clk,		CS2CDR,	SSI2);
-DEF_CLK_DIV2(enfc_div,		&enfc_clk,		CS2CDR,	ENFC);
-DEF_CLK_DIV2(spdif_div,		&spdif_clk,		CDCDR,	SPDIF);
-DEF_CLK_DIV2(asrc_serial_div,	&asrc_serial_clk,	CDCDR,	ASRC_SERIAL);
-
-static struct divider *dividers[] = {
-	&arm_div,
-	&ipg_div,
-	&ahb_div,
-	&axi_div,
-	&mmdc_ch0_axi_div,
-	&mmdc_ch1_axi_div,
-	&periph_clk2_div,
-	&periph2_clk2_div,
-	&gpu2d_core_div,
-	&gpu3d_core_div,
-	&gpu3d_shader_div,
-	&ipg_perclk_div,
-	&emi_div,
-	&emi_slow_div,
-	&can_div,
-	&uart_div,
-	&usdhc1_div,
-	&usdhc2_div,
-	&usdhc3_div,
-	&usdhc4_div,
-	&vpu_div,
-	&hsi_tx_div,
-	&ipu1_di0_pre_div,
-	&ipu1_di1_pre_div,
-	&ipu2_di0_pre_div,
-	&ipu2_di1_pre_div,
-	&ipu1_div,
-	&ipu2_div,
-	&ssi1_div,
-	&ssi3_div,
-	&esai_div,
-	&ssi2_div,
-	&enfc_div,
-	&spdif_div,
-	&asrc_serial_div,
-	&cko1_div,
-};
-
-static unsigned long ldb_di_clk_get_rate(struct clk *clk)
-{
-	u32 val = readl_relaxed(CSCMR2);
-
-	val &= (clk == &ldb_di0_clk) ? BM_CSCMR2_LDB_DI0_IPU_DIV :
-				       BM_CSCMR2_LDB_DI1_IPU_DIV;
-	if (val)
-		return clk_get_rate(clk->parent) / 7;
-	else
-		return clk_get_rate(clk->parent) * 2 / 7;
-}
-
-static int ldb_di_clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	u32 val = readl_relaxed(CSCMR2);
-
-	if (rate * 7 <= parent_rate + parent_rate / 20)
-		val |= BM_CSCMR2_LDB_DI0_IPU_DIV;
-	else
-		val &= ~BM_CSCMR2_LDB_DI0_IPU_DIV;
-
-	writel_relaxed(val, CSCMR2);
-
-	return 0;
-}
-
-static unsigned long ldb_di_clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-
-	if (rate * 7 <= parent_rate + parent_rate / 20)
-		return parent_rate / 7;
-	else
-		return 2 * parent_rate / 7;
-}
-
-static unsigned long _clk_get_rate(struct clk *clk)
-{
-	struct divider *d;
-	u32 val, pred, podf;
-	int i, num;
-
-	if (clk == &ldb_di0_clk || clk == &ldb_di1_clk)
-		return ldb_di_clk_get_rate(clk);
-
-	num = ARRAY_SIZE(dividers);
-	for (i = 0; i < num; i++)
-		if (dividers[i]->clk == clk) {
-			d = dividers[i];
-			break;
-		}
-	if (i == num)
-		return clk_get_rate(clk->parent);
-
-	val = readl_relaxed(d->reg);
-	pred = ((val & d->bm_pred) >> d->bp_pred) + 1;
-	podf = ((val & d->bm_podf) >> d->bp_podf) + 1;
-
-	return clk_get_rate(clk->parent) / (pred * podf);
-}
-
-static int clk_busy_wait(struct clk *clk)
-{
-	int timeout = 0x100000;
-	u32 bm;
-
-	if (clk == &axi_clk)
-		bm = BM_CDHIPR_AXI_PODF_BUSY;
-	else if (clk == &ahb_clk)
-		bm = BM_CDHIPR_AHB_PODF_BUSY;
-	else if (clk == &mmdc_ch0_axi_clk)
-		bm = BM_CDHIPR_MMDC_CH0_PODF_BUSY;
-	else if (clk == &periph_clk)
-		bm = BM_CDHIPR_PERIPH_SEL_BUSY;
-	else if (clk == &arm_clk)
-		bm = BM_CDHIPR_ARM_PODF_BUSY;
-	else
-		return -EINVAL;
-
-	while ((readl_relaxed(CDHIPR) & bm) && --timeout)
-		cpu_relax();
-
-	if (unlikely(!timeout))
-		return -EBUSY;
-
-	return 0;
-}
-
-static int _clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	struct divider *d;
-	u32 val, div, max_div, pred = 0, podf;
-	int i, num;
-
-	if (clk == &ldb_di0_clk || clk == &ldb_di1_clk)
-		return ldb_di_clk_set_rate(clk, rate);
-
-	num = ARRAY_SIZE(dividers);
-	for (i = 0; i < num; i++)
-		if (dividers[i]->clk == clk) {
-			d = dividers[i];
-			break;
-		}
-	if (i == num)
-		return -EINVAL;
-
-	max_div = ((d->bm_pred >> d->bp_pred) + 1) *
-		  ((d->bm_podf >> d->bp_podf) + 1);
-
-	div = parent_rate / rate;
-	if (div == 0)
-		div++;
-
-	if ((parent_rate / div != rate) || div > max_div)
-		return -EINVAL;
-
-	if (d->bm_pred) {
-		calc_pred_podf_dividers(div, &pred, &podf);
-	} else {
-		pred = 1;
-		podf = div;
-	}
-
-	val = readl_relaxed(d->reg);
-	val &= ~(d->bm_pred | d->bm_podf);
-	val |= (pred - 1) << d->bp_pred | (podf - 1) << d->bp_podf;
-	writel_relaxed(val, d->reg);
-
-	if (clk == &axi_clk || clk == &ahb_clk ||
-	    clk == &mmdc_ch0_axi_clk || clk == &arm_clk)
-		return clk_busy_wait(clk);
-
-	return 0;
-}
-
-static unsigned long _clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	u32 div = parent_rate / rate;
-	u32 div_max, pred = 0, podf;
-	struct divider *d;
-	int i, num;
-
-	if (clk == &ldb_di0_clk || clk == &ldb_di1_clk)
-		return ldb_di_clk_round_rate(clk, rate);
-
-	num = ARRAY_SIZE(dividers);
-	for (i = 0; i < num; i++)
-		if (dividers[i]->clk == clk) {
-			d = dividers[i];
-			break;
-		}
-	if (i == num)
-		return -EINVAL;
-
-	if (div == 0 || parent_rate % rate)
-		div++;
-
-	if (d->bm_pred) {
-		calc_pred_podf_dividers(div, &pred, &podf);
-		div = pred * podf;
-	} else {
-		div_max = (d->bm_podf >> d->bp_podf) + 1;
-		if (div > div_max)
-			div = div_max;
-	}
-
-	return parent_rate / div;
-}
-
-struct multiplexer {
-	struct clk *clk;
-	void __iomem *reg;
-	u32 bp;
-	u32 bm;
-	int pnum;
-	struct clk *parents[];
-};
-
-static struct multiplexer axi_mux = {
-	.clk = &axi_clk,
-	.reg = CBCDR,
-	.bp = BP_CBCDR_AXI_SEL,
-	.bm = BM_CBCDR_AXI_SEL,
-	.parents = {
-		&periph_clk,
-		&pll2_pfd_400m,
-		&pll3_pfd_540m,
-		NULL
-	},
-};
-
-static struct multiplexer periph_mux = {
-	.clk = &periph_clk,
-	.reg = CBCDR,
-	.bp = BP_CBCDR_PERIPH_CLK_SEL,
-	.bm = BM_CBCDR_PERIPH_CLK_SEL,
-	.parents = {
-		&periph_pre_clk,
-		&periph_clk2_clk,
-		NULL
-	},
-};
-
-static struct multiplexer periph_pre_mux = {
-	.clk = &periph_pre_clk,
-	.reg = CBCMR,
-	.bp = BP_CBCMR_PRE_PERIPH_CLK_SEL,
-	.bm = BM_CBCMR_PRE_PERIPH_CLK_SEL,
-	.parents = {
-		&pll2_bus,
-		&pll2_pfd_400m,
-		&pll2_pfd_352m,
-		&pll2_200m,
-		NULL
-	},
-};
-
-static struct multiplexer periph_clk2_mux = {
-	.clk = &periph_clk2_clk,
-	.reg = CBCMR,
-	.bp = BP_CBCMR_PERIPH_CLK2_SEL,
-	.bm = BM_CBCMR_PERIPH_CLK2_SEL,
-	.parents = {
-		&pll3_usb_otg,
-		&osc_clk,
-		NULL
-	},
-};
-
-static struct multiplexer periph2_mux = {
-	.clk = &periph2_clk,
-	.reg = CBCDR,
-	.bp = BP_CBCDR_PERIPH2_CLK_SEL,
-	.bm = BM_CBCDR_PERIPH2_CLK_SEL,
-	.parents = {
-		&periph2_pre_clk,
-		&periph2_clk2_clk,
-		NULL
-	},
-};
-
-static struct multiplexer periph2_pre_mux = {
-	.clk = &periph2_pre_clk,
-	.reg = CBCMR,
-	.bp = BP_CBCMR_PRE_PERIPH2_CLK_SEL,
-	.bm = BM_CBCMR_PRE_PERIPH2_CLK_SEL,
-	.parents = {
-		&pll2_bus,
-		&pll2_pfd_400m,
-		&pll2_pfd_352m,
-		&pll2_200m,
-		NULL
-	},
-};
-
-static struct multiplexer periph2_clk2_mux = {
-	.clk = &periph2_clk2_clk,
-	.reg = CBCMR,
-	.bp = BP_CBCMR_PERIPH2_CLK2_SEL,
-	.bm = BM_CBCMR_PERIPH2_CLK2_SEL,
-	.parents = {
-		&pll3_usb_otg,
-		&osc_clk,
-		NULL
-	},
-};
-
-static struct multiplexer gpu2d_axi_mux = {
-	.clk = &gpu2d_axi_clk,
-	.reg = CBCMR,
-	.bp = BP_CBCMR_GPU2D_AXI_SEL,
-	.bm = BM_CBCMR_GPU2D_AXI_SEL,
-	.parents = {
-		&axi_clk,
-		&ahb_clk,
-		NULL
-	},
-};
-
-static struct multiplexer gpu3d_axi_mux = {
-	.clk = &gpu3d_axi_clk,
-	.reg = CBCMR,
-	.bp = BP_CBCMR_GPU3D_AXI_SEL,
-	.bm = BM_CBCMR_GPU3D_AXI_SEL,
-	.parents = {
-		&axi_clk,
-		&ahb_clk,
-		NULL
-	},
-};
-
-static struct multiplexer gpu3d_core_mux = {
-	.clk = &gpu3d_core_clk,
-	.reg = CBCMR,
-	.bp = BP_CBCMR_GPU3D_CORE_SEL,
-	.bm = BM_CBCMR_GPU3D_CORE_SEL,
-	.parents = {
-		&mmdc_ch0_axi_clk,
-		&pll3_usb_otg,
-		&pll2_pfd_594m,
-		&pll2_pfd_400m,
-		NULL
-	},
-};
-
-static struct multiplexer gpu3d_shader_mux = {
-	.clk = &gpu3d_shader_clk,
-	.reg = CBCMR,
-	.bp = BP_CBCMR_GPU3D_SHADER_SEL,
-	.bm = BM_CBCMR_GPU3D_SHADER_SEL,
-	.parents = {
-		&mmdc_ch0_axi_clk,
-		&pll3_usb_otg,
-		&pll2_pfd_594m,
-		&pll3_pfd_720m,
-		NULL
-	},
-};
-
-static struct multiplexer pcie_axi_mux = {
-	.clk = &pcie_clk,
-	.reg = CBCMR,
-	.bp = BP_CBCMR_PCIE_AXI_SEL,
-	.bm = BM_CBCMR_PCIE_AXI_SEL,
-	.parents = {
-		&axi_clk,
-		&ahb_clk,
-		NULL
-	},
-};
-
-static struct multiplexer vdo_axi_mux = {
-	.clk = &vdo_axi_clk,
-	.reg = CBCMR,
-	.bp = BP_CBCMR_VDO_AXI_SEL,
-	.bm = BM_CBCMR_VDO_AXI_SEL,
-	.parents = {
-		&axi_clk,
-		&ahb_clk,
-		NULL
-	},
-};
-
-static struct multiplexer vpu_axi_mux = {
-	.clk = &vpu_clk,
-	.reg = CBCMR,
-	.bp = BP_CBCMR_VPU_AXI_SEL,
-	.bm = BM_CBCMR_VPU_AXI_SEL,
-	.parents = {
-		&axi_clk,
-		&pll2_pfd_400m,
-		&pll2_pfd_352m,
-		NULL
-	},
-};
-
-static struct multiplexer gpu2d_core_mux = {
-	.clk = &gpu2d_core_clk,
-	.reg = CBCMR,
-	.bp = BP_CBCMR_GPU2D_CORE_SEL,
-	.bm = BM_CBCMR_GPU2D_CORE_SEL,
-	.parents = {
-		&axi_clk,
-		&pll3_usb_otg,
-		&pll2_pfd_352m,
-		&pll2_pfd_400m,
-		NULL
-	},
-};
-
-#define DEF_SSI_MUX(id)							\
-	static struct multiplexer ssi##id##_mux = {			\
-		.clk = &ssi##id##_clk,					\
-		.reg = CSCMR1,						\
-		.bp = BP_CSCMR1_SSI##id##_SEL,				\
-		.bm = BM_CSCMR1_SSI##id##_SEL,				\
-		.parents = {						\
-			&pll3_pfd_508m,					\
-			&pll3_pfd_454m,					\
-			&pll4_audio,					\
-			NULL						\
-		},							\
-	}
-
-DEF_SSI_MUX(1);
-DEF_SSI_MUX(2);
-DEF_SSI_MUX(3);
-
-#define DEF_USDHC_MUX(id)						\
-	static struct multiplexer usdhc##id##_mux = {			\
-		.clk = &usdhc##id##_clk,				\
-		.reg = CSCMR1,						\
-		.bp = BP_CSCMR1_USDHC##id##_SEL,			\
-		.bm = BM_CSCMR1_USDHC##id##_SEL,			\
-		.parents = {						\
-			&pll2_pfd_400m,					\
-			&pll2_pfd_352m,					\
-			NULL						\
-		},							\
-	}
-
-DEF_USDHC_MUX(1);
-DEF_USDHC_MUX(2);
-DEF_USDHC_MUX(3);
-DEF_USDHC_MUX(4);
-
-static struct multiplexer emi_mux = {
-	.clk = &emi_clk,
-	.reg = CSCMR1,
-	.bp = BP_CSCMR1_EMI_SEL,
-	.bm = BM_CSCMR1_EMI_SEL,
-	.parents = {
-		&axi_clk,
-		&pll3_usb_otg,
-		&pll2_pfd_400m,
-		&pll2_pfd_352m,
-		NULL
-	},
-};
-
-static struct multiplexer emi_slow_mux = {
-	.clk = &emi_slow_clk,
-	.reg = CSCMR1,
-	.bp = BP_CSCMR1_EMI_SLOW_SEL,
-	.bm = BM_CSCMR1_EMI_SLOW_SEL,
-	.parents = {
-		&axi_clk,
-		&pll3_usb_otg,
-		&pll2_pfd_400m,
-		&pll2_pfd_352m,
-		NULL
-	},
-};
-
-static struct multiplexer esai_mux = {
-	.clk = &esai_clk,
-	.reg = CSCMR2,
-	.bp = BP_CSCMR2_ESAI_SEL,
-	.bm = BM_CSCMR2_ESAI_SEL,
-	.parents = {
-		&pll4_audio,
-		&pll3_pfd_508m,
-		&pll3_pfd_454m,
-		&pll3_usb_otg,
-		NULL
-	},
-};
-
-#define DEF_LDB_DI_MUX(id)						\
-	static struct multiplexer ldb_di##id##_mux = {			\
-		.clk = &ldb_di##id##_clk,				\
-		.reg = CS2CDR,						\
-		.bp = BP_CS2CDR_LDB_DI##id##_SEL,			\
-		.bm = BM_CS2CDR_LDB_DI##id##_SEL,			\
-		.parents = {						\
-			&pll5_video,					\
-			&pll2_pfd_352m,					\
-			&pll2_pfd_400m,					\
-			&pll3_pfd_540m,					\
-			&pll3_usb_otg,					\
-			NULL						\
-		},							\
-	}
-
-DEF_LDB_DI_MUX(0);
-DEF_LDB_DI_MUX(1);
-
-static struct multiplexer enfc_mux = {
-	.clk = &enfc_clk,
-	.reg = CS2CDR,
-	.bp = BP_CS2CDR_ENFC_SEL,
-	.bm = BM_CS2CDR_ENFC_SEL,
-	.parents = {
-		&pll2_pfd_352m,
-		&pll2_bus,
-		&pll3_usb_otg,
-		&pll2_pfd_400m,
-		NULL
-	},
-};
-
-static struct multiplexer spdif_mux = {
-	.clk = &spdif_clk,
-	.reg = CDCDR,
-	.bp = BP_CDCDR_SPDIF_SEL,
-	.bm = BM_CDCDR_SPDIF_SEL,
-	.parents = {
-		&pll4_audio,
-		&pll3_pfd_508m,
-		&pll3_pfd_454m,
-		&pll3_usb_otg,
-		NULL
-	},
-};
-
-static struct multiplexer asrc_serial_mux = {
-	.clk = &asrc_serial_clk,
-	.reg = CDCDR,
-	.bp = BP_CDCDR_ASRC_SERIAL_SEL,
-	.bm = BM_CDCDR_ASRC_SERIAL_SEL,
-	.parents = {
-		&pll4_audio,
-		&pll3_pfd_508m,
-		&pll3_pfd_454m,
-		&pll3_usb_otg,
-		NULL
-	},
-};
-
-static struct multiplexer hsi_tx_mux = {
-	.clk = &hsi_tx_clk,
-	.reg = CDCDR,
-	.bp = BP_CDCDR_HSI_TX_SEL,
-	.bm = BM_CDCDR_HSI_TX_SEL,
-	.parents = {
-		&pll3_120m,
-		&pll2_pfd_400m,
-		NULL
-	},
-};
-
-#define DEF_IPU_DI_PRE_MUX(r, i, d)					\
-	static struct multiplexer ipu##i##_di##d##_pre_mux = {		\
-		.clk = &ipu##i##_di##d##_pre_clk,			\
-		.reg = r,						\
-		.bp = BP_##r##_IPU##i##_DI##d##_PRE_SEL,		\
-		.bm = BM_##r##_IPU##i##_DI##d##_PRE_SEL,		\
-		.parents = {						\
-			&mmdc_ch0_axi_clk,				\
-			&pll3_usb_otg,					\
-			&pll5_video,					\
-			&pll2_pfd_352m,					\
-			&pll2_pfd_400m,					\
-			&pll3_pfd_540m,					\
-			NULL						\
-		},							\
-	}
-
-DEF_IPU_DI_PRE_MUX(CHSCCDR, 1, 0);
-DEF_IPU_DI_PRE_MUX(CHSCCDR, 1, 1);
-DEF_IPU_DI_PRE_MUX(CSCDR2, 2, 0);
-DEF_IPU_DI_PRE_MUX(CSCDR2, 2, 1);
-
-#define DEF_IPU_DI_MUX(r, i, d)						\
-	static struct multiplexer ipu##i##_di##d##_mux = {		\
-		.clk = &ipu##i##_di##d##_clk,				\
-		.reg = r,						\
-		.bp = BP_##r##_IPU##i##_DI##d##_SEL,			\
-		.bm = BM_##r##_IPU##i##_DI##d##_SEL,			\
-		.parents = {						\
-			&ipu##i##_di##d##_pre_clk,			\
-			&dummy_clk,					\
-			&dummy_clk,					\
-			&ldb_di0_clk,					\
-			&ldb_di1_clk,					\
-			NULL						\
-		},							\
-	}
-
-DEF_IPU_DI_MUX(CHSCCDR, 1, 0);
-DEF_IPU_DI_MUX(CHSCCDR, 1, 1);
-DEF_IPU_DI_MUX(CSCDR2, 2, 0);
-DEF_IPU_DI_MUX(CSCDR2, 2, 1);
-
-#define DEF_IPU_MUX(id)							\
-	static struct multiplexer ipu##id##_mux = {			\
-		.clk = &ipu##id##_clk,					\
-		.reg = CSCDR3,						\
-		.bp = BP_CSCDR3_IPU##id##_HSP_SEL,			\
-		.bm = BM_CSCDR3_IPU##id##_HSP_SEL,			\
-		.parents = {						\
-			&mmdc_ch0_axi_clk,				\
-			&pll2_pfd_400m,					\
-			&pll3_120m,					\
-			&pll3_pfd_540m,					\
-			NULL						\
-		},							\
-	}
-
-DEF_IPU_MUX(1);
-DEF_IPU_MUX(2);
-
-static struct multiplexer cko1_mux = {
-	.clk = &cko1_clk,
-	.reg = CCOSR,
-	.bp = BP_CCOSR_CKO1_SEL,
-	.bm = BM_CCOSR_CKO1_SEL,
-	.parents = {
-		&pll3_usb_otg,
-		&pll2_bus,
-		&pll1_sys,
-		&pll5_video,
-		&dummy_clk,
-		&axi_clk,
-		&enfc_clk,
-		&ipu1_di0_clk,
-		&ipu1_di1_clk,
-		&ipu2_di0_clk,
-		&ipu2_di1_clk,
-		&ahb_clk,
-		&ipg_clk,
-		&ipg_perclk,
-		&ckil_clk,
-		&pll4_audio,
-		NULL
-	},
-};
-
-static struct multiplexer *multiplexers[] = {
-	&axi_mux,
-	&periph_mux,
-	&periph_pre_mux,
-	&periph_clk2_mux,
-	&periph2_mux,
-	&periph2_pre_mux,
-	&periph2_clk2_mux,
-	&gpu2d_axi_mux,
-	&gpu3d_axi_mux,
-	&gpu3d_core_mux,
-	&gpu3d_shader_mux,
-	&pcie_axi_mux,
-	&vdo_axi_mux,
-	&vpu_axi_mux,
-	&gpu2d_core_mux,
-	&ssi1_mux,
-	&ssi2_mux,
-	&ssi3_mux,
-	&usdhc1_mux,
-	&usdhc2_mux,
-	&usdhc3_mux,
-	&usdhc4_mux,
-	&emi_mux,
-	&emi_slow_mux,
-	&esai_mux,
-	&ldb_di0_mux,
-	&ldb_di1_mux,
-	&enfc_mux,
-	&spdif_mux,
-	&asrc_serial_mux,
-	&hsi_tx_mux,
-	&ipu1_di0_pre_mux,
-	&ipu1_di0_mux,
-	&ipu1_di1_pre_mux,
-	&ipu1_di1_mux,
-	&ipu2_di0_pre_mux,
-	&ipu2_di0_mux,
-	&ipu2_di1_pre_mux,
-	&ipu2_di1_mux,
-	&ipu1_mux,
-	&ipu2_mux,
-	&cko1_mux,
-};
-
-static int _clk_set_parent(struct clk *clk, struct clk *parent)
-{
-	struct multiplexer *m;
-	int i, num;
-	u32 val;
-
-	num = ARRAY_SIZE(multiplexers);
-	for (i = 0; i < num; i++)
-		if (multiplexers[i]->clk == clk) {
-			m = multiplexers[i];
-			break;
-		}
-	if (i == num)
-		return -EINVAL;
-
-	i = 0;
-	while (m->parents[i]) {
-		if (parent == m->parents[i])
-			break;
-		i++;
-	}
-	if (!m->parents[i] || m->parents[i] == &dummy_clk)
-		return -EINVAL;
-
-	val = readl_relaxed(m->reg);
-	val &= ~m->bm;
-	val |= i << m->bp;
-	writel_relaxed(val, m->reg);
-
-	if (clk == &periph_clk)
-		return clk_busy_wait(clk);
-
-	return 0;
-}
-
-#define DEF_NG_CLK(name, p)				\
-	static struct clk name = {			\
-		.get_rate	= _clk_get_rate,	\
-		.set_rate	= _clk_set_rate,	\
-		.round_rate	= _clk_round_rate,	\
-		.set_parent	= _clk_set_parent,	\
-		.parent		= p,			\
-	}
-
-DEF_NG_CLK(periph_clk2_clk,	&osc_clk);
-DEF_NG_CLK(periph_pre_clk,	&pll2_bus);
-DEF_NG_CLK(periph_clk,		&periph_pre_clk);
-DEF_NG_CLK(periph2_clk2_clk,	&osc_clk);
-DEF_NG_CLK(periph2_pre_clk,	&pll2_bus);
-DEF_NG_CLK(periph2_clk,		&periph2_pre_clk);
-DEF_NG_CLK(axi_clk,		&periph_clk);
-DEF_NG_CLK(emi_clk,		&axi_clk);
-DEF_NG_CLK(arm_clk,		&pll1_sw_clk);
-DEF_NG_CLK(ahb_clk,		&periph_clk);
-DEF_NG_CLK(ipg_clk,		&ahb_clk);
-DEF_NG_CLK(ipg_perclk,		&ipg_clk);
-DEF_NG_CLK(ipu1_di0_pre_clk,	&pll3_pfd_540m);
-DEF_NG_CLK(ipu1_di1_pre_clk,	&pll3_pfd_540m);
-DEF_NG_CLK(ipu2_di0_pre_clk,	&pll3_pfd_540m);
-DEF_NG_CLK(ipu2_di1_pre_clk,	&pll3_pfd_540m);
-DEF_NG_CLK(asrc_serial_clk,	&pll3_usb_otg);
-
-#define DEF_CLK(name, er, es, p, s)			\
-	static struct clk name = {			\
-		.enable_reg	= er,			\
-		.enable_shift	= es,			\
-		.enable		= _clk_enable,		\
-		.disable	= _clk_disable,		\
-		.get_rate	= _clk_get_rate,	\
-		.set_rate	= _clk_set_rate,	\
-		.round_rate	= _clk_round_rate,	\
-		.set_parent	= _clk_set_parent,	\
-		.parent		= p,			\
-		.secondary	= s,			\
-	}
-
-#define DEF_CLK_1B(name, er, es, p, s)			\
-	static struct clk name = {			\
-		.enable_reg	= er,			\
-		.enable_shift	= es,			\
-		.enable		= _clk_enable_1b,	\
-		.disable	= _clk_disable_1b,	\
-		.get_rate	= _clk_get_rate,	\
-		.set_rate	= _clk_set_rate,	\
-		.round_rate	= _clk_round_rate,	\
-		.set_parent	= _clk_set_parent,	\
-		.parent		= p,			\
-		.secondary	= s,			\
-	}
-
-DEF_CLK(aips_tz1_clk,	  CCGR0, CG0,  &ahb_clk,	  NULL);
-DEF_CLK(aips_tz2_clk,	  CCGR0, CG1,  &ahb_clk,	  NULL);
-DEF_CLK(apbh_dma_clk,	  CCGR0, CG2,  &ahb_clk,	  NULL);
-DEF_CLK(asrc_clk,	  CCGR0, CG3,  &pll4_audio,	  NULL);
-DEF_CLK(can1_serial_clk,  CCGR0, CG8,  &pll3_usb_otg,	  NULL);
-DEF_CLK(can1_clk,	  CCGR0, CG7,  &pll3_usb_otg,	  &can1_serial_clk);
-DEF_CLK(can2_serial_clk,  CCGR0, CG10, &pll3_usb_otg,	  NULL);
-DEF_CLK(can2_clk,	  CCGR0, CG9,  &pll3_usb_otg,	  &can2_serial_clk);
-DEF_CLK(ecspi1_clk,	  CCGR1, CG0,  &pll3_60m,	  NULL);
-DEF_CLK(ecspi2_clk,	  CCGR1, CG1,  &pll3_60m,	  NULL);
-DEF_CLK(ecspi3_clk,	  CCGR1, CG2,  &pll3_60m,	  NULL);
-DEF_CLK(ecspi4_clk,	  CCGR1, CG3,  &pll3_60m,	  NULL);
-DEF_CLK(ecspi5_clk,	  CCGR1, CG4,  &pll3_60m,	  NULL);
-DEF_CLK(enet_clk,	  CCGR1, CG5,  &ipg_clk,	  NULL);
-DEF_CLK(esai_clk,	  CCGR1, CG8,  &pll3_usb_otg,	  NULL);
-DEF_CLK(gpt_serial_clk,	  CCGR1, CG11, &ipg_perclk,	  NULL);
-DEF_CLK(gpt_clk,	  CCGR1, CG10, &ipg_perclk,	  &gpt_serial_clk);
-DEF_CLK(gpu2d_core_clk,	  CCGR1, CG12, &pll2_pfd_352m,	  &gpu2d_axi_clk);
-DEF_CLK(gpu3d_core_clk,	  CCGR1, CG13, &pll2_pfd_594m,	  &gpu3d_axi_clk);
-DEF_CLK(gpu3d_shader_clk, CCGR1, CG13, &pll3_pfd_720m,	  &gpu3d_axi_clk);
-DEF_CLK(hdmi_iahb_clk,	  CCGR2, CG0,  &ahb_clk,	  NULL);
-DEF_CLK(hdmi_isfr_clk,	  CCGR2, CG2,  &pll3_pfd_540m,	  &hdmi_iahb_clk);
-DEF_CLK(i2c1_clk,	  CCGR2, CG3,  &ipg_perclk,	  NULL);
-DEF_CLK(i2c2_clk,	  CCGR2, CG4,  &ipg_perclk,	  NULL);
-DEF_CLK(i2c3_clk,	  CCGR2, CG5,  &ipg_perclk,	  NULL);
-DEF_CLK(iim_clk,	  CCGR2, CG6,  &ipg_clk,	  NULL);
-DEF_CLK(enfc_clk,	  CCGR2, CG7,  &pll2_pfd_352m,	  NULL);
-DEF_CLK(ipu1_clk,	  CCGR3, CG0,  &mmdc_ch0_axi_clk, NULL);
-DEF_CLK(ipu1_di0_clk,	  CCGR3, CG1,  &ipu1_di0_pre_clk, NULL);
-DEF_CLK(ipu1_di1_clk,	  CCGR3, CG2,  &ipu1_di1_pre_clk, NULL);
-DEF_CLK(ipu2_clk,	  CCGR3, CG3,  &mmdc_ch0_axi_clk, NULL);
-DEF_CLK(ipu2_di0_clk,	  CCGR3, CG4,  &ipu2_di0_pre_clk, NULL);
-DEF_CLK(ipu2_di1_clk,	  CCGR3, CG5,  &ipu2_di1_pre_clk, NULL);
-DEF_CLK(ldb_di0_clk,	  CCGR3, CG6,  &pll3_pfd_540m,	  NULL);
-DEF_CLK(ldb_di1_clk,	  CCGR3, CG7,  &pll3_pfd_540m,	  NULL);
-DEF_CLK(hsi_tx_clk,	  CCGR3, CG8,  &pll2_pfd_400m,	  NULL);
-DEF_CLK(mlb_clk,	  CCGR3, CG9,  &pll6_mlb,	  NULL);
-DEF_CLK(mmdc_ch0_ipg_clk, CCGR3, CG12, &ipg_clk,	  NULL);
-DEF_CLK(mmdc_ch0_axi_clk, CCGR3, CG10, &periph_clk,	  &mmdc_ch0_ipg_clk);
-DEF_CLK(mmdc_ch1_ipg_clk, CCGR3, CG13, &ipg_clk,	  NULL);
-DEF_CLK(mmdc_ch1_axi_clk, CCGR3, CG11, &periph2_clk,	  &mmdc_ch1_ipg_clk);
-DEF_CLK(openvg_axi_clk,   CCGR3, CG13, &axi_clk,	  NULL);
-DEF_CLK(pwm1_clk,	  CCGR4, CG8,  &ipg_perclk,	  NULL);
-DEF_CLK(pwm2_clk,	  CCGR4, CG9,  &ipg_perclk,	  NULL);
-DEF_CLK(pwm3_clk,	  CCGR4, CG10, &ipg_perclk,	  NULL);
-DEF_CLK(pwm4_clk,	  CCGR4, CG11, &ipg_perclk,	  NULL);
-DEF_CLK(gpmi_bch_apb_clk, CCGR4, CG12, &usdhc3_clk,	  NULL);
-DEF_CLK(gpmi_bch_clk,	  CCGR4, CG13, &usdhc4_clk,	  &gpmi_bch_apb_clk);
-DEF_CLK(gpmi_apb_clk,	  CCGR4, CG15, &usdhc3_clk,	  &gpmi_bch_clk);
-DEF_CLK(gpmi_io_clk,	  CCGR4, CG14, &enfc_clk,	  &gpmi_apb_clk);
-DEF_CLK(sdma_clk,	  CCGR5, CG3,  &ahb_clk,	  NULL);
-DEF_CLK(spba_clk,	  CCGR5, CG6,  &ipg_clk,	  NULL);
-DEF_CLK(spdif_clk,	  CCGR5, CG7,  &pll3_usb_otg,	  &spba_clk);
-DEF_CLK(ssi1_clk,	  CCGR5, CG9,  &pll3_pfd_508m,	  NULL);
-DEF_CLK(ssi2_clk,	  CCGR5, CG10, &pll3_pfd_508m,	  NULL);
-DEF_CLK(ssi3_clk,	  CCGR5, CG11, &pll3_pfd_508m,	  NULL);
-DEF_CLK(uart_serial_clk,  CCGR5, CG13, &pll3_usb_otg,	  NULL);
-DEF_CLK(uart_clk,	  CCGR5, CG12, &pll3_80m,	  &uart_serial_clk);
-DEF_CLK(usboh3_clk,	  CCGR6, CG0,  &ipg_clk,	  NULL);
-DEF_CLK(usdhc1_clk,	  CCGR6, CG1,  &pll2_pfd_400m,	  NULL);
-DEF_CLK(usdhc2_clk,	  CCGR6, CG2,  &pll2_pfd_400m,	  NULL);
-DEF_CLK(usdhc3_clk,	  CCGR6, CG3,  &pll2_pfd_400m,	  NULL);
-DEF_CLK(usdhc4_clk,	  CCGR6, CG4,  &pll2_pfd_400m,	  NULL);
-DEF_CLK(emi_slow_clk,	  CCGR6, CG5,  &axi_clk,	  NULL);
-DEF_CLK(vdo_axi_clk,	  CCGR6, CG6,  &axi_clk,	  NULL);
-DEF_CLK(vpu_clk,	  CCGR6, CG7,  &axi_clk,	  NULL);
-DEF_CLK_1B(cko1_clk,	  CCOSR, BP_CCOSR_CKO1_EN, &pll2_bus, NULL);
-
-static int pcie_clk_enable(struct clk *clk)
-{
-	u32 val;
-
-	val = readl_relaxed(PLL8_ENET);
-	val |= BM_PLL_ENET_EN_PCIE;
-	writel_relaxed(val, PLL8_ENET);
-
-	return _clk_enable(clk);
-}
-
-static void pcie_clk_disable(struct clk *clk)
-{
-	u32 val;
-
-	_clk_disable(clk);
-
-	val = readl_relaxed(PLL8_ENET);
-	val &= BM_PLL_ENET_EN_PCIE;
-	writel_relaxed(val, PLL8_ENET);
-}
-
-static struct clk pcie_clk = {
-	.enable_reg = CCGR4,
-	.enable_shift = CG0,
-	.enable = pcie_clk_enable,
-	.disable = pcie_clk_disable,
-	.set_parent = _clk_set_parent,
-	.parent = &axi_clk,
-	.secondary = &pll8_enet,
-};
-
-static int sata_clk_enable(struct clk *clk)
-{
-	u32 val;
-
-	val = readl_relaxed(PLL8_ENET);
-	val |= BM_PLL_ENET_EN_SATA;
-	writel_relaxed(val, PLL8_ENET);
-
-	return _clk_enable(clk);
-}
-
-static void sata_clk_disable(struct clk *clk)
-{
-	u32 val;
-
-	_clk_disable(clk);
-
-	val = readl_relaxed(PLL8_ENET);
-	val &= BM_PLL_ENET_EN_SATA;
-	writel_relaxed(val, PLL8_ENET);
-}
-
-static struct clk sata_clk = {
-	.enable_reg = CCGR5,
-	.enable_shift = CG2,
-	.enable = sata_clk_enable,
-	.disable = sata_clk_disable,
-	.parent = &ipg_clk,
-	.secondary = &pll8_enet,
-};
-
-#define _REGISTER_CLOCK(d, n, c) \
-	{ \
-		.dev_id = d, \
-		.con_id = n, \
-		.clk = &c, \
-	}
-
-static struct clk_lookup lookups[] = {
-	_REGISTER_CLOCK("2020000.uart", NULL, uart_clk),
-	_REGISTER_CLOCK("21e8000.uart", NULL, uart_clk),
-	_REGISTER_CLOCK("21ec000.uart", NULL, uart_clk),
-	_REGISTER_CLOCK("21f0000.uart", NULL, uart_clk),
-	_REGISTER_CLOCK("21f4000.uart", NULL, uart_clk),
-	_REGISTER_CLOCK("2188000.enet", NULL, enet_clk),
-	_REGISTER_CLOCK("2190000.usdhc", NULL, usdhc1_clk),
-	_REGISTER_CLOCK("2194000.usdhc", NULL, usdhc2_clk),
-	_REGISTER_CLOCK("2198000.usdhc", NULL, usdhc3_clk),
-	_REGISTER_CLOCK("219c000.usdhc", NULL, usdhc4_clk),
-	_REGISTER_CLOCK("21a0000.i2c", NULL, i2c1_clk),
-	_REGISTER_CLOCK("21a4000.i2c", NULL, i2c2_clk),
-	_REGISTER_CLOCK("21a8000.i2c", NULL, i2c3_clk),
-	_REGISTER_CLOCK("2008000.ecspi", NULL, ecspi1_clk),
-	_REGISTER_CLOCK("200c000.ecspi", NULL, ecspi2_clk),
-	_REGISTER_CLOCK("2010000.ecspi", NULL, ecspi3_clk),
-	_REGISTER_CLOCK("2014000.ecspi", NULL, ecspi4_clk),
-	_REGISTER_CLOCK("2018000.ecspi", NULL, ecspi5_clk),
-	_REGISTER_CLOCK("20ec000.sdma", NULL, sdma_clk),
-	_REGISTER_CLOCK("20bc000.wdog", NULL, dummy_clk),
-	_REGISTER_CLOCK("20c0000.wdog", NULL, dummy_clk),
-	_REGISTER_CLOCK("smp_twd", NULL, twd_clk),
-	_REGISTER_CLOCK(NULL, "ckih", ckih_clk),
-	_REGISTER_CLOCK(NULL, "ckil_clk", ckil_clk),
-	_REGISTER_CLOCK(NULL, "aips_tz1_clk", aips_tz1_clk),
-	_REGISTER_CLOCK(NULL, "aips_tz2_clk", aips_tz2_clk),
-	_REGISTER_CLOCK(NULL, "asrc_clk", asrc_clk),
-	_REGISTER_CLOCK(NULL, "can2_clk", can2_clk),
-	_REGISTER_CLOCK(NULL, "hdmi_isfr_clk", hdmi_isfr_clk),
-	_REGISTER_CLOCK(NULL, "iim_clk", iim_clk),
-	_REGISTER_CLOCK(NULL, "mlb_clk", mlb_clk),
-	_REGISTER_CLOCK(NULL, "openvg_axi_clk", openvg_axi_clk),
-	_REGISTER_CLOCK(NULL, "pwm1_clk", pwm1_clk),
-	_REGISTER_CLOCK(NULL, "pwm2_clk", pwm2_clk),
-	_REGISTER_CLOCK(NULL, "pwm3_clk", pwm3_clk),
-	_REGISTER_CLOCK(NULL, "pwm4_clk", pwm4_clk),
-	_REGISTER_CLOCK(NULL, "gpmi_io_clk", gpmi_io_clk),
-	_REGISTER_CLOCK(NULL, "usboh3_clk", usboh3_clk),
-	_REGISTER_CLOCK(NULL, "sata_clk", sata_clk),
-	_REGISTER_CLOCK(NULL, "cko1_clk", cko1_clk),
-};
-
-int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
-{
-	u32 val = readl_relaxed(CLPCR);
-
-	val &= ~BM_CLPCR_LPM;
-	switch (mode) {
-	case WAIT_CLOCKED:
-		break;
-	case WAIT_UNCLOCKED:
-		val |= 0x1 << BP_CLPCR_LPM;
-		break;
-	case STOP_POWER_ON:
-		val |= 0x2 << BP_CLPCR_LPM;
-		break;
-	case WAIT_UNCLOCKED_POWER_OFF:
-		val |= 0x1 << BP_CLPCR_LPM;
-		val &= ~BM_CLPCR_VSTBY;
-		val &= ~BM_CLPCR_SBYOS;
-		break;
-	case STOP_POWER_OFF:
-		val |= 0x2 << BP_CLPCR_LPM;
-		val |= 0x3 << BP_CLPCR_STBY_COUNT;
-		val |= BM_CLPCR_VSTBY;
-		val |= BM_CLPCR_SBYOS;
-		break;
-	default:
-		return -EINVAL;
-	}
-	writel_relaxed(val, CLPCR);
-
-	return 0;
-}
-
-static struct map_desc imx6q_clock_desc[] = {
-	imx_map_entry(MX6Q, CCM, MT_DEVICE),
-	imx_map_entry(MX6Q, ANATOP, MT_DEVICE),
-};
-
-void __init imx6q_clock_map_io(void)
-{
-	iotable_init(imx6q_clock_desc, ARRAY_SIZE(imx6q_clock_desc));
-}
-
-int __init mx6q_clocks_init(void)
-{
-	struct device_node *np;
-	void __iomem *base;
-	int i, irq;
-
-	/* retrieve the freqency of fixed clocks from device tree */
-	for_each_compatible_node(np, NULL, "fixed-clock") {
-		u32 rate;
-		if (of_property_read_u32(np, "clock-frequency", &rate))
-			continue;
-
-		if (of_device_is_compatible(np, "fsl,imx-ckil"))
-			external_low_reference = rate;
-		else if (of_device_is_compatible(np, "fsl,imx-ckih1"))
-			external_high_reference = rate;
-		else if (of_device_is_compatible(np, "fsl,imx-osc"))
-			oscillator_reference = rate;
-	}
-
-	for (i = 0; i < ARRAY_SIZE(lookups); i++)
-		clkdev_add(&lookups[i]);
-
-	/* only keep necessary clocks on */
-	writel_relaxed(0x3 << CG0  | 0x3 << CG1  | 0x3 << CG2,	CCGR0);
-	writel_relaxed(0x3 << CG8  | 0x3 << CG9  | 0x3 << CG10,	CCGR2);
-	writel_relaxed(0x3 << CG10 | 0x3 << CG12,		CCGR3);
-	writel_relaxed(0x3 << CG4  | 0x3 << CG6  | 0x3 << CG7,	CCGR4);
-	writel_relaxed(0x3 << CG0,				CCGR5);
-	writel_relaxed(0,					CCGR6);
-	writel_relaxed(0,					CCGR7);
-
-	clk_enable(&uart_clk);
-	clk_enable(&mmdc_ch0_axi_clk);
-
-	clk_set_rate(&pll4_audio, FREQ_650M);
-	clk_set_rate(&pll5_video, FREQ_650M);
-	clk_set_parent(&ipu1_di0_clk, &ipu1_di0_pre_clk);
-	clk_set_parent(&ipu1_di0_pre_clk, &pll5_video);
-	clk_set_parent(&gpu3d_shader_clk, &pll2_pfd_594m);
-	clk_set_rate(&gpu3d_shader_clk, FREQ_594M);
-	clk_set_parent(&gpu3d_core_clk, &mmdc_ch0_axi_clk);
-	clk_set_rate(&gpu3d_core_clk, FREQ_528M);
-	clk_set_parent(&asrc_serial_clk, &pll3_usb_otg);
-	clk_set_rate(&asrc_serial_clk, 1500000);
-	clk_set_rate(&enfc_clk, 11000000);
-
-	/*
-	 * Before pinctrl API is available, we have to rely on the pad
-	 * configuration set up by bootloader.  For usdhc example here,
-	 * u-boot sets up the pads for 49.5 MHz case, and we have to lower
-	 * the usdhc clock from 198 to 49.5 MHz to match the pad configuration.
-	 *
-	 * FIXME: This is should be removed after pinctrl API is available.
-	 * At that time, usdhc driver can call pinctrl API to change pad
-	 * configuration dynamically per different usdhc clock settings.
-	 */
-	clk_set_rate(&usdhc1_clk, 49500000);
-	clk_set_rate(&usdhc2_clk, 49500000);
-	clk_set_rate(&usdhc3_clk, 49500000);
-	clk_set_rate(&usdhc4_clk, 49500000);
-
-	clk_set_parent(&cko1_clk, &ahb_clk);
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt");
-	base = of_iomap(np, 0);
-	WARN_ON(!base);
-	irq = irq_of_parse_and_map(np, 0);
-	mxc_timer_init(&gpt_clk, base, irq);
-
-	return 0;
-}
diff --git a/arch/arm/mach-imx/clock-mx51-mx53.c b/arch/arm/mach-imx/clock-mx51-mx53.c
deleted file mode 100644
index 08470504a088..000000000000
--- a/arch/arm/mach-imx/clock-mx51-mx53.c
+++ /dev/null
@@ -1,1675 +0,0 @@
-/*
- * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <linux/of.h>
-
-#include <asm/div64.h>
-
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/clock.h>
-
-#include "crm-regs-imx5.h"
-
-/* External clock values passed-in by the board code */
-static unsigned long external_high_reference, external_low_reference;
-static unsigned long oscillator_reference, ckih2_reference;
-
-static struct clk osc_clk;
-static struct clk pll1_main_clk;
-static struct clk pll1_sw_clk;
-static struct clk pll2_sw_clk;
-static struct clk pll3_sw_clk;
-static struct clk mx53_pll4_sw_clk;
-static struct clk lp_apm_clk;
-static struct clk periph_apm_clk;
-static struct clk ahb_clk;
-static struct clk ipg_clk;
-static struct clk usboh3_clk;
-static struct clk emi_fast_clk;
-static struct clk ipu_clk;
-static struct clk mipi_hsc1_clk;
-static struct clk esdhc1_clk;
-static struct clk esdhc2_clk;
-static struct clk esdhc3_mx53_clk;
-
-#define MAX_DPLL_WAIT_TRIES	1000 /* 1000 * udelay(1) = 1ms */
-
-/* calculate best pre and post dividers to get the required divider */
-static void __calc_pre_post_dividers(u32 div, u32 *pre, u32 *post,
-	u32 max_pre, u32 max_post)
-{
-	if (div >= max_pre * max_post) {
-		*pre = max_pre;
-		*post = max_post;
-	} else if (div >= max_pre) {
-		u32 min_pre, temp_pre, old_err, err;
-		min_pre = DIV_ROUND_UP(div, max_post);
-		old_err = max_pre;
-		for (temp_pre = max_pre; temp_pre >= min_pre; temp_pre--) {
-			err = div % temp_pre;
-			if (err == 0) {
-				*pre = temp_pre;
-				break;
-			}
-			err = temp_pre - err;
-			if (err < old_err) {
-				old_err = err;
-				*pre = temp_pre;
-			}
-		}
-		*post = DIV_ROUND_UP(div, *pre);
-	} else {
-		*pre = div;
-		*post = 1;
-	}
-}
-
-static void _clk_ccgr_setclk(struct clk *clk, unsigned mode)
-{
-	u32 reg = __raw_readl(clk->enable_reg);
-
-	reg &= ~(MXC_CCM_CCGRx_CG_MASK << clk->enable_shift);
-	reg |= mode << clk->enable_shift;
-
-	__raw_writel(reg, clk->enable_reg);
-}
-
-static int _clk_ccgr_enable(struct clk *clk)
-{
-	_clk_ccgr_setclk(clk, MXC_CCM_CCGRx_MOD_ON);
-	return 0;
-}
-
-static void _clk_ccgr_disable(struct clk *clk)
-{
-	_clk_ccgr_setclk(clk, MXC_CCM_CCGRx_MOD_OFF);
-}
-
-static int _clk_ccgr_enable_inrun(struct clk *clk)
-{
-	_clk_ccgr_setclk(clk, MXC_CCM_CCGRx_MOD_IDLE);
-	return 0;
-}
-
-static void _clk_ccgr_disable_inwait(struct clk *clk)
-{
-	_clk_ccgr_setclk(clk, MXC_CCM_CCGRx_MOD_IDLE);
-}
-
-/*
- * For the 4-to-1 muxed input clock
- */
-static inline u32 _get_mux(struct clk *parent, struct clk *m0,
-			   struct clk *m1, struct clk *m2, struct clk *m3)
-{
-	if (parent == m0)
-		return 0;
-	else if (parent == m1)
-		return 1;
-	else if (parent == m2)
-		return 2;
-	else if (parent == m3)
-		return 3;
-	else
-		BUG();
-
-	return -EINVAL;
-}
-
-static inline void __iomem *_mx51_get_pll_base(struct clk *pll)
-{
-	if (pll == &pll1_main_clk)
-		return MX51_DPLL1_BASE;
-	else if (pll == &pll2_sw_clk)
-		return MX51_DPLL2_BASE;
-	else if (pll == &pll3_sw_clk)
-		return MX51_DPLL3_BASE;
-	else
-		BUG();
-
-	return NULL;
-}
-
-static inline void __iomem *_mx53_get_pll_base(struct clk *pll)
-{
-	if (pll == &pll1_main_clk)
-		return MX53_DPLL1_BASE;
-	else if (pll == &pll2_sw_clk)
-		return MX53_DPLL2_BASE;
-	else if (pll == &pll3_sw_clk)
-		return MX53_DPLL3_BASE;
-	else if (pll == &mx53_pll4_sw_clk)
-		return MX53_DPLL4_BASE;
-	else
-		BUG();
-
-	return NULL;
-}
-
-static inline void __iomem *_get_pll_base(struct clk *pll)
-{
-	if (cpu_is_mx51())
-		return _mx51_get_pll_base(pll);
-	else
-		return _mx53_get_pll_base(pll);
-}
-
-static unsigned long clk_pll_get_rate(struct clk *clk)
-{
-	long mfi, mfn, mfd, pdf, ref_clk, mfn_abs;
-	unsigned long dp_op, dp_mfd, dp_mfn, dp_ctl, pll_hfsm, dbl;
-	void __iomem *pllbase;
-	s64 temp;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	pllbase = _get_pll_base(clk);
-
-	dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
-	pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM;
-	dbl = dp_ctl & MXC_PLL_DP_CTL_DPDCK0_2_EN;
-
-	if (pll_hfsm == 0) {
-		dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP);
-		dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD);
-		dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN);
-	} else {
-		dp_op = __raw_readl(pllbase + MXC_PLL_DP_HFS_OP);
-		dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFD);
-		dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFN);
-	}
-	pdf = dp_op & MXC_PLL_DP_OP_PDF_MASK;
-	mfi = (dp_op & MXC_PLL_DP_OP_MFI_MASK) >> MXC_PLL_DP_OP_MFI_OFFSET;
-	mfi = (mfi <= 5) ? 5 : mfi;
-	mfd = dp_mfd & MXC_PLL_DP_MFD_MASK;
-	mfn = mfn_abs = dp_mfn & MXC_PLL_DP_MFN_MASK;
-	/* Sign extend to 32-bits */
-	if (mfn >= 0x04000000) {
-		mfn |= 0xFC000000;
-		mfn_abs = -mfn;
-	}
-
-	ref_clk = 2 * parent_rate;
-	if (dbl != 0)
-		ref_clk *= 2;
-
-	ref_clk /= (pdf + 1);
-	temp = (u64) ref_clk * mfn_abs;
-	do_div(temp, mfd + 1);
-	if (mfn < 0)
-		temp = -temp;
-	temp = (ref_clk * mfi) + temp;
-
-	return temp;
-}
-
-static int _clk_pll_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 reg;
-	void __iomem *pllbase;
-
-	long mfi, pdf, mfn, mfd = 999999;
-	s64 temp64;
-	unsigned long quad_parent_rate;
-	unsigned long pll_hfsm, dp_ctl;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	pllbase = _get_pll_base(clk);
-
-	quad_parent_rate = 4 * parent_rate;
-	pdf = mfi = -1;
-	while (++pdf < 16 && mfi < 5)
-		mfi = rate * (pdf+1) / quad_parent_rate;
-	if (mfi > 15)
-		return -EINVAL;
-	pdf--;
-
-	temp64 = rate * (pdf+1) - quad_parent_rate * mfi;
-	do_div(temp64, quad_parent_rate/1000000);
-	mfn = (long)temp64;
-
-	dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
-	/* use dpdck0_2 */
-	__raw_writel(dp_ctl | 0x1000L, pllbase + MXC_PLL_DP_CTL);
-	pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM;
-	if (pll_hfsm == 0) {
-		reg = mfi << 4 | pdf;
-		__raw_writel(reg, pllbase + MXC_PLL_DP_OP);
-		__raw_writel(mfd, pllbase + MXC_PLL_DP_MFD);
-		__raw_writel(mfn, pllbase + MXC_PLL_DP_MFN);
-	} else {
-		reg = mfi << 4 | pdf;
-		__raw_writel(reg, pllbase + MXC_PLL_DP_HFS_OP);
-		__raw_writel(mfd, pllbase + MXC_PLL_DP_HFS_MFD);
-		__raw_writel(mfn, pllbase + MXC_PLL_DP_HFS_MFN);
-	}
-
-	return 0;
-}
-
-static int _clk_pll_enable(struct clk *clk)
-{
-	u32 reg;
-	void __iomem *pllbase;
-	int i = 0;
-
-	pllbase = _get_pll_base(clk);
-	reg = __raw_readl(pllbase + MXC_PLL_DP_CTL);
-	if (reg & MXC_PLL_DP_CTL_UPEN)
-		return 0;
-
-	reg |= MXC_PLL_DP_CTL_UPEN;
-	__raw_writel(reg, pllbase + MXC_PLL_DP_CTL);
-
-	/* Wait for lock */
-	do {
-		reg = __raw_readl(pllbase + MXC_PLL_DP_CTL);
-		if (reg & MXC_PLL_DP_CTL_LRF)
-			break;
-
-		udelay(1);
-	} while (++i < MAX_DPLL_WAIT_TRIES);
-
-	if (i == MAX_DPLL_WAIT_TRIES) {
-		pr_err("MX5: pll locking failed\n");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static void _clk_pll_disable(struct clk *clk)
-{
-	u32 reg;
-	void __iomem *pllbase;
-
-	pllbase = _get_pll_base(clk);
-	reg = __raw_readl(pllbase + MXC_PLL_DP_CTL) & ~MXC_PLL_DP_CTL_UPEN;
-	__raw_writel(reg, pllbase + MXC_PLL_DP_CTL);
-}
-
-static int _clk_pll1_sw_set_parent(struct clk *clk, struct clk *parent)
-{
-	u32 reg, step;
-
-	reg = __raw_readl(MXC_CCM_CCSR);
-
-	/* When switching from pll_main_clk to a bypass clock, first select a
-	 * multiplexed clock in 'step_sel', then shift the glitchless mux
-	 * 'pll1_sw_clk_sel'.
-	 *
-	 * When switching back, do it in reverse order
-	 */
-	if (parent == &pll1_main_clk) {
-		/* Switch to pll1_main_clk */
-		reg &= ~MXC_CCM_CCSR_PLL1_SW_CLK_SEL;
-		__raw_writel(reg, MXC_CCM_CCSR);
-		/* step_clk mux switched to lp_apm, to save power. */
-		reg = __raw_readl(MXC_CCM_CCSR);
-		reg &= ~MXC_CCM_CCSR_STEP_SEL_MASK;
-		reg |= (MXC_CCM_CCSR_STEP_SEL_LP_APM <<
-				MXC_CCM_CCSR_STEP_SEL_OFFSET);
-	} else {
-		if (parent == &lp_apm_clk) {
-			step = MXC_CCM_CCSR_STEP_SEL_LP_APM;
-		} else  if (parent == &pll2_sw_clk) {
-			step = MXC_CCM_CCSR_STEP_SEL_PLL2_DIVIDED;
-		} else  if (parent == &pll3_sw_clk) {
-			step = MXC_CCM_CCSR_STEP_SEL_PLL3_DIVIDED;
-		} else
-			return -EINVAL;
-
-		reg &= ~MXC_CCM_CCSR_STEP_SEL_MASK;
-		reg |= (step << MXC_CCM_CCSR_STEP_SEL_OFFSET);
-
-		__raw_writel(reg, MXC_CCM_CCSR);
-		/* Switch to step_clk */
-		reg = __raw_readl(MXC_CCM_CCSR);
-		reg |= MXC_CCM_CCSR_PLL1_SW_CLK_SEL;
-	}
-	__raw_writel(reg, MXC_CCM_CCSR);
-	return 0;
-}
-
-static unsigned long clk_pll1_sw_get_rate(struct clk *clk)
-{
-	u32 reg, div;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	reg = __raw_readl(MXC_CCM_CCSR);
-
-	if (clk->parent == &pll2_sw_clk) {
-		div = ((reg & MXC_CCM_CCSR_PLL2_PODF_MASK) >>
-		       MXC_CCM_CCSR_PLL2_PODF_OFFSET) + 1;
-	} else if (clk->parent == &pll3_sw_clk) {
-		div = ((reg & MXC_CCM_CCSR_PLL3_PODF_MASK) >>
-		       MXC_CCM_CCSR_PLL3_PODF_OFFSET) + 1;
-	} else
-		div = 1;
-	return parent_rate / div;
-}
-
-static int _clk_pll2_sw_set_parent(struct clk *clk, struct clk *parent)
-{
-	u32 reg;
-
-	reg = __raw_readl(MXC_CCM_CCSR);
-
-	if (parent == &pll2_sw_clk)
-		reg &= ~MXC_CCM_CCSR_PLL2_SW_CLK_SEL;
-	else
-		reg |= MXC_CCM_CCSR_PLL2_SW_CLK_SEL;
-
-	__raw_writel(reg, MXC_CCM_CCSR);
-	return 0;
-}
-
-static int _clk_lp_apm_set_parent(struct clk *clk, struct clk *parent)
-{
-	u32 reg;
-
-	if (parent == &osc_clk)
-		reg = __raw_readl(MXC_CCM_CCSR) & ~MXC_CCM_CCSR_LP_APM_SEL;
-	else
-		return -EINVAL;
-
-	__raw_writel(reg, MXC_CCM_CCSR);
-
-	return 0;
-}
-
-static unsigned long clk_cpu_get_rate(struct clk *clk)
-{
-	u32 cacrr, div;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-	cacrr = __raw_readl(MXC_CCM_CACRR);
-	div = (cacrr & MXC_CCM_CACRR_ARM_PODF_MASK) + 1;
-
-	return parent_rate / div;
-}
-
-static int clk_cpu_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 reg, cpu_podf;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-	cpu_podf = parent_rate / rate - 1;
-	/* use post divider to change freq */
-	reg = __raw_readl(MXC_CCM_CACRR);
-	reg &= ~MXC_CCM_CACRR_ARM_PODF_MASK;
-	reg |= cpu_podf << MXC_CCM_CACRR_ARM_PODF_OFFSET;
-	__raw_writel(reg, MXC_CCM_CACRR);
-
-	return 0;
-}
-
-static int _clk_periph_apm_set_parent(struct clk *clk, struct clk *parent)
-{
-	u32 reg, mux;
-	int i = 0;
-
-	mux = _get_mux(parent, &pll1_sw_clk, &pll3_sw_clk, &lp_apm_clk, NULL);
-
-	reg = __raw_readl(MXC_CCM_CBCMR) & ~MXC_CCM_CBCMR_PERIPH_CLK_SEL_MASK;
-	reg |= mux << MXC_CCM_CBCMR_PERIPH_CLK_SEL_OFFSET;
-	__raw_writel(reg, MXC_CCM_CBCMR);
-
-	/* Wait for lock */
-	do {
-		reg = __raw_readl(MXC_CCM_CDHIPR);
-		if (!(reg &  MXC_CCM_CDHIPR_PERIPH_CLK_SEL_BUSY))
-			break;
-
-		udelay(1);
-	} while (++i < MAX_DPLL_WAIT_TRIES);
-
-	if (i == MAX_DPLL_WAIT_TRIES) {
-		pr_err("MX5: Set parent for periph_apm clock failed\n");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int _clk_main_bus_set_parent(struct clk *clk, struct clk *parent)
-{
-	u32 reg;
-
-	reg = __raw_readl(MXC_CCM_CBCDR);
-
-	if (parent == &pll2_sw_clk)
-		reg &= ~MXC_CCM_CBCDR_PERIPH_CLK_SEL;
-	else if (parent == &periph_apm_clk)
-		reg |= MXC_CCM_CBCDR_PERIPH_CLK_SEL;
-	else
-		return -EINVAL;
-
-	__raw_writel(reg, MXC_CCM_CBCDR);
-
-	return 0;
-}
-
-static struct clk main_bus_clk = {
-	.parent = &pll2_sw_clk,
-	.set_parent = _clk_main_bus_set_parent,
-};
-
-static unsigned long clk_ahb_get_rate(struct clk *clk)
-{
-	u32 reg, div;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	reg = __raw_readl(MXC_CCM_CBCDR);
-	div = ((reg & MXC_CCM_CBCDR_AHB_PODF_MASK) >>
-	       MXC_CCM_CBCDR_AHB_PODF_OFFSET) + 1;
-	return parent_rate / div;
-}
-
-
-static int _clk_ahb_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 reg, div;
-	unsigned long parent_rate;
-	int i = 0;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	div = parent_rate / rate;
-	if (div > 8 || div < 1 || ((parent_rate / div) != rate))
-		return -EINVAL;
-
-	reg = __raw_readl(MXC_CCM_CBCDR);
-	reg &= ~MXC_CCM_CBCDR_AHB_PODF_MASK;
-	reg |= (div - 1) << MXC_CCM_CBCDR_AHB_PODF_OFFSET;
-	__raw_writel(reg, MXC_CCM_CBCDR);
-
-	/* Wait for lock */
-	do {
-		reg = __raw_readl(MXC_CCM_CDHIPR);
-		if (!(reg & MXC_CCM_CDHIPR_AHB_PODF_BUSY))
-			break;
-
-		udelay(1);
-	} while (++i < MAX_DPLL_WAIT_TRIES);
-
-	if (i == MAX_DPLL_WAIT_TRIES) {
-		pr_err("MX5: clk_ahb_set_rate failed\n");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static unsigned long _clk_ahb_round_rate(struct clk *clk,
-						unsigned long rate)
-{
-	u32 div;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	div = parent_rate / rate;
-	if (div > 8)
-		div = 8;
-	else if (div == 0)
-		div++;
-	return parent_rate / div;
-}
-
-
-static int _clk_max_enable(struct clk *clk)
-{
-	u32 reg;
-
-	_clk_ccgr_enable(clk);
-
-	/* Handshake with MAX when LPM is entered. */
-	reg = __raw_readl(MXC_CCM_CLPCR);
-	if (cpu_is_mx51())
-		reg &= ~MX51_CCM_CLPCR_BYPASS_MAX_LPM_HS;
-	else if (cpu_is_mx53())
-		reg &= ~MX53_CCM_CLPCR_BYPASS_MAX_LPM_HS;
-	__raw_writel(reg, MXC_CCM_CLPCR);
-
-	return 0;
-}
-
-static void _clk_max_disable(struct clk *clk)
-{
-	u32 reg;
-
-	_clk_ccgr_disable_inwait(clk);
-
-	/* No Handshake with MAX when LPM is entered as its disabled. */
-	reg = __raw_readl(MXC_CCM_CLPCR);
-	if (cpu_is_mx51())
-		reg |= MX51_CCM_CLPCR_BYPASS_MAX_LPM_HS;
-	else if (cpu_is_mx53())
-		reg &= ~MX53_CCM_CLPCR_BYPASS_MAX_LPM_HS;
-	__raw_writel(reg, MXC_CCM_CLPCR);
-}
-
-static unsigned long clk_ipg_get_rate(struct clk *clk)
-{
-	u32 reg, div;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	reg = __raw_readl(MXC_CCM_CBCDR);
-	div = ((reg & MXC_CCM_CBCDR_IPG_PODF_MASK) >>
-	       MXC_CCM_CBCDR_IPG_PODF_OFFSET) + 1;
-
-	return parent_rate / div;
-}
-
-static unsigned long clk_ipg_per_get_rate(struct clk *clk)
-{
-	u32 reg, prediv1, prediv2, podf;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	if (clk->parent == &main_bus_clk || clk->parent == &lp_apm_clk) {
-		/* the main_bus_clk is the one before the DVFS engine */
-		reg = __raw_readl(MXC_CCM_CBCDR);
-		prediv1 = ((reg & MXC_CCM_CBCDR_PERCLK_PRED1_MASK) >>
-			   MXC_CCM_CBCDR_PERCLK_PRED1_OFFSET) + 1;
-		prediv2 = ((reg & MXC_CCM_CBCDR_PERCLK_PRED2_MASK) >>
-			   MXC_CCM_CBCDR_PERCLK_PRED2_OFFSET) + 1;
-		podf = ((reg & MXC_CCM_CBCDR_PERCLK_PODF_MASK) >>
-			MXC_CCM_CBCDR_PERCLK_PODF_OFFSET) + 1;
-		return parent_rate / (prediv1 * prediv2 * podf);
-	} else if (clk->parent == &ipg_clk)
-		return parent_rate;
-	else
-		BUG();
-}
-
-static int _clk_ipg_per_set_parent(struct clk *clk, struct clk *parent)
-{
-	u32 reg;
-
-	reg = __raw_readl(MXC_CCM_CBCMR);
-
-	reg &= ~MXC_CCM_CBCMR_PERCLK_LP_APM_CLK_SEL;
-	reg &= ~MXC_CCM_CBCMR_PERCLK_IPG_CLK_SEL;
-
-	if (parent == &ipg_clk)
-		reg |= MXC_CCM_CBCMR_PERCLK_IPG_CLK_SEL;
-	else if (parent == &lp_apm_clk)
-		reg |= MXC_CCM_CBCMR_PERCLK_LP_APM_CLK_SEL;
-	else if (parent != &main_bus_clk)
-		return -EINVAL;
-
-	__raw_writel(reg, MXC_CCM_CBCMR);
-
-	return 0;
-}
-
-#define clk_nfc_set_parent	NULL
-
-static unsigned long clk_nfc_get_rate(struct clk *clk)
-{
-	unsigned long rate;
-	u32 reg, div;
-
-	reg = __raw_readl(MXC_CCM_CBCDR);
-	div = ((reg & MXC_CCM_CBCDR_NFC_PODF_MASK) >>
-	       MXC_CCM_CBCDR_NFC_PODF_OFFSET) + 1;
-	rate = clk_get_rate(clk->parent) / div;
-	WARN_ON(rate == 0);
-	return rate;
-}
-
-static unsigned long clk_nfc_round_rate(struct clk *clk,
-						unsigned long rate)
-{
-	u32 div;
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-
-	if (!rate)
-		return -EINVAL;
-
-	div = parent_rate / rate;
-
-	if (parent_rate % rate)
-		div++;
-
-	if (div > 8)
-		return -EINVAL;
-
-	return parent_rate / div;
-
-}
-
-static int clk_nfc_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 reg, div;
-
-	div = clk_get_rate(clk->parent) / rate;
-	if (div == 0)
-		div++;
-	if (((clk_get_rate(clk->parent) / div) != rate) || (div > 8))
-		return -EINVAL;
-
-	reg = __raw_readl(MXC_CCM_CBCDR);
-	reg &= ~MXC_CCM_CBCDR_NFC_PODF_MASK;
-	reg |= (div - 1) << MXC_CCM_CBCDR_NFC_PODF_OFFSET;
-	__raw_writel(reg, MXC_CCM_CBCDR);
-
-	while (__raw_readl(MXC_CCM_CDHIPR) &
-			MXC_CCM_CDHIPR_NFC_IPG_INT_MEM_PODF_BUSY){
-	}
-
-	return 0;
-}
-
-static unsigned long get_high_reference_clock_rate(struct clk *clk)
-{
-	return external_high_reference;
-}
-
-static unsigned long get_low_reference_clock_rate(struct clk *clk)
-{
-	return external_low_reference;
-}
-
-static unsigned long get_oscillator_reference_clock_rate(struct clk *clk)
-{
-	return oscillator_reference;
-}
-
-static unsigned long get_ckih2_reference_clock_rate(struct clk *clk)
-{
-	return ckih2_reference;
-}
-
-static unsigned long clk_emi_slow_get_rate(struct clk *clk)
-{
-	u32 reg, div;
-
-	reg = __raw_readl(MXC_CCM_CBCDR);
-	div = ((reg & MXC_CCM_CBCDR_EMI_PODF_MASK) >>
-	       MXC_CCM_CBCDR_EMI_PODF_OFFSET) + 1;
-
-	return clk_get_rate(clk->parent) / div;
-}
-
-static unsigned long _clk_ddr_hf_get_rate(struct clk *clk)
-{
-	unsigned long rate;
-	u32 reg, div;
-
-	reg = __raw_readl(MXC_CCM_CBCDR);
-	div = ((reg & MXC_CCM_CBCDR_DDR_PODF_MASK) >>
-		MXC_CCM_CBCDR_DDR_PODF_OFFSET) + 1;
-	rate = clk_get_rate(clk->parent) / div;
-
-	return rate;
-}
-
-/* External high frequency clock */
-static struct clk ckih_clk = {
-	.get_rate = get_high_reference_clock_rate,
-};
-
-static struct clk ckih2_clk = {
-	.get_rate = get_ckih2_reference_clock_rate,
-};
-
-static struct clk osc_clk = {
-	.get_rate = get_oscillator_reference_clock_rate,
-};
-
-/* External low frequency (32kHz) clock */
-static struct clk ckil_clk = {
-	.get_rate = get_low_reference_clock_rate,
-};
-
-static struct clk pll1_main_clk = {
-	.parent = &osc_clk,
-	.get_rate = clk_pll_get_rate,
-	.enable = _clk_pll_enable,
-	.disable = _clk_pll_disable,
-};
-
-/* Clock tree block diagram (WIP):
- * 	CCM: Clock Controller Module
- *
- * PLL output -> |
- *               | CCM Switcher -> CCM_CLK_ROOT_GEN ->
- * PLL bypass -> |
- *
- */
-
-/* PLL1 SW supplies to ARM core */
-static struct clk pll1_sw_clk = {
-	.parent = &pll1_main_clk,
-	.set_parent = _clk_pll1_sw_set_parent,
-	.get_rate = clk_pll1_sw_get_rate,
-};
-
-/* PLL2 SW supplies to AXI/AHB/IP buses */
-static struct clk pll2_sw_clk = {
-	.parent = &osc_clk,
-	.get_rate = clk_pll_get_rate,
-	.set_rate = _clk_pll_set_rate,
-	.set_parent = _clk_pll2_sw_set_parent,
-	.enable = _clk_pll_enable,
-	.disable = _clk_pll_disable,
-};
-
-/* PLL3 SW supplies to serial clocks like USB, SSI, etc. */
-static struct clk pll3_sw_clk = {
-	.parent = &osc_clk,
-	.set_rate = _clk_pll_set_rate,
-	.get_rate = clk_pll_get_rate,
-	.enable = _clk_pll_enable,
-	.disable = _clk_pll_disable,
-};
-
-/* PLL4 SW supplies to LVDS Display Bridge(LDB) */
-static struct clk mx53_pll4_sw_clk = {
-	.parent = &osc_clk,
-	.set_rate = _clk_pll_set_rate,
-	.enable = _clk_pll_enable,
-	.disable = _clk_pll_disable,
-};
-
-/* Low-power Audio Playback Mode clock */
-static struct clk lp_apm_clk = {
-	.parent = &osc_clk,
-	.set_parent = _clk_lp_apm_set_parent,
-};
-
-static struct clk periph_apm_clk = {
-	.parent = &pll1_sw_clk,
-	.set_parent = _clk_periph_apm_set_parent,
-};
-
-static struct clk cpu_clk = {
-	.parent = &pll1_sw_clk,
-	.get_rate = clk_cpu_get_rate,
-	.set_rate = clk_cpu_set_rate,
-};
-
-static struct clk ahb_clk = {
-	.parent = &main_bus_clk,
-	.get_rate = clk_ahb_get_rate,
-	.set_rate = _clk_ahb_set_rate,
-	.round_rate = _clk_ahb_round_rate,
-};
-
-static struct clk iim_clk = {
-	.parent = &ipg_clk,
-	.enable_reg = MXC_CCM_CCGR0,
-	.enable_shift = MXC_CCM_CCGRx_CG15_OFFSET,
-};
-
-/* Main IP interface clock for access to registers */
-static struct clk ipg_clk = {
-	.parent = &ahb_clk,
-	.get_rate = clk_ipg_get_rate,
-};
-
-static struct clk ipg_perclk = {
-	.parent = &lp_apm_clk,
-	.get_rate = clk_ipg_per_get_rate,
-	.set_parent = _clk_ipg_per_set_parent,
-};
-
-static struct clk ahb_max_clk = {
-	.parent = &ahb_clk,
-	.enable_reg = MXC_CCM_CCGR0,
-	.enable_shift = MXC_CCM_CCGRx_CG14_OFFSET,
-	.enable = _clk_max_enable,
-	.disable = _clk_max_disable,
-};
-
-static struct clk aips_tz1_clk = {
-	.parent = &ahb_clk,
-	.secondary = &ahb_max_clk,
-	.enable_reg = MXC_CCM_CCGR0,
-	.enable_shift = MXC_CCM_CCGRx_CG12_OFFSET,
-	.enable = _clk_ccgr_enable,
-	.disable = _clk_ccgr_disable_inwait,
-};
-
-static struct clk aips_tz2_clk = {
-	.parent = &ahb_clk,
-	.secondary = &ahb_max_clk,
-	.enable_reg = MXC_CCM_CCGR0,
-	.enable_shift = MXC_CCM_CCGRx_CG13_OFFSET,
-	.enable = _clk_ccgr_enable,
-	.disable = _clk_ccgr_disable_inwait,
-};
-
-static struct clk gpc_dvfs_clk = {
-	.enable_reg = MXC_CCM_CCGR5,
-	.enable_shift = MXC_CCM_CCGRx_CG12_OFFSET,
-	.enable = _clk_ccgr_enable,
-	.disable = _clk_ccgr_disable,
-};
-
-static struct clk gpt_32k_clk = {
-	.id = 0,
-	.parent = &ckil_clk,
-};
-
-static struct clk dummy_clk = {
-	.id = 0,
-};
-
-static struct clk emi_slow_clk = {
-	.parent = &pll2_sw_clk,
-	.enable_reg = MXC_CCM_CCGR5,
-	.enable_shift = MXC_CCM_CCGRx_CG8_OFFSET,
-	.enable = _clk_ccgr_enable,
-	.disable = _clk_ccgr_disable_inwait,
-	.get_rate = clk_emi_slow_get_rate,
-};
-
-static int clk_ipu_enable(struct clk *clk)
-{
-	u32 reg;
-
-	_clk_ccgr_enable(clk);
-
-	/* Enable handshake with IPU when certain clock rates are changed */
-	reg = __raw_readl(MXC_CCM_CCDR);
-	reg &= ~MXC_CCM_CCDR_IPU_HS_MASK;
-	__raw_writel(reg, MXC_CCM_CCDR);
-
-	/* Enable handshake with IPU when LPM is entered */
-	reg = __raw_readl(MXC_CCM_CLPCR);
-	reg &= ~MXC_CCM_CLPCR_BYPASS_IPU_LPM_HS;
-	__raw_writel(reg, MXC_CCM_CLPCR);
-
-	return 0;
-}
-
-static void clk_ipu_disable(struct clk *clk)
-{
-	u32 reg;
-
-	_clk_ccgr_disable(clk);
-
-	/* Disable handshake with IPU whe dividers are changed */
-	reg = __raw_readl(MXC_CCM_CCDR);
-	reg |= MXC_CCM_CCDR_IPU_HS_MASK;
-	__raw_writel(reg, MXC_CCM_CCDR);
-
-	/* Disable handshake with IPU when LPM is entered */
-	reg = __raw_readl(MXC_CCM_CLPCR);
-	reg |= MXC_CCM_CLPCR_BYPASS_IPU_LPM_HS;
-	__raw_writel(reg, MXC_CCM_CLPCR);
-}
-
-static struct clk ahbmux1_clk = {
-	.parent = &ahb_clk,
-	.secondary = &ahb_max_clk,
-	.enable_reg = MXC_CCM_CCGR0,
-	.enable_shift = MXC_CCM_CCGRx_CG8_OFFSET,
-	.enable = _clk_ccgr_enable,
-	.disable = _clk_ccgr_disable_inwait,
-};
-
-static struct clk ipu_sec_clk = {
-	.parent = &emi_fast_clk,
-	.secondary = &ahbmux1_clk,
-};
-
-static struct clk ddr_hf_clk = {
-	.parent = &pll1_sw_clk,
-	.get_rate = _clk_ddr_hf_get_rate,
-};
-
-static struct clk ddr_clk = {
-	.parent = &ddr_hf_clk,
-};
-
-/* clock definitions for MIPI HSC unit which has been removed
- * from documentation, but not from hardware
- */
-static int _clk_hsc_enable(struct clk *clk)
-{
-	u32 reg;
-
-	_clk_ccgr_enable(clk);
-	/* Handshake with IPU when certain clock rates are changed. */
-	reg = __raw_readl(MXC_CCM_CCDR);
-	reg &= ~MXC_CCM_CCDR_HSC_HS_MASK;
-	__raw_writel(reg, MXC_CCM_CCDR);
-
-	reg = __raw_readl(MXC_CCM_CLPCR);
-	reg &= ~MXC_CCM_CLPCR_BYPASS_HSC_LPM_HS;
-	__raw_writel(reg, MXC_CCM_CLPCR);
-
-	return 0;
-}
-
-static void _clk_hsc_disable(struct clk *clk)
-{
-	u32 reg;
-
-	_clk_ccgr_disable(clk);
-	/* No handshake with HSC as its not enabled. */
-	reg = __raw_readl(MXC_CCM_CCDR);
-	reg |= MXC_CCM_CCDR_HSC_HS_MASK;
-	__raw_writel(reg, MXC_CCM_CCDR);
-
-	reg = __raw_readl(MXC_CCM_CLPCR);
-	reg |= MXC_CCM_CLPCR_BYPASS_HSC_LPM_HS;
-	__raw_writel(reg, MXC_CCM_CLPCR);
-}
-
-static struct clk mipi_hsp_clk = {
-	.parent = &ipu_clk,
-	.enable_reg = MXC_CCM_CCGR4,
-	.enable_shift = MXC_CCM_CCGRx_CG6_OFFSET,
-	.enable = _clk_hsc_enable,
-	.disable = _clk_hsc_disable,
-	.secondary = &mipi_hsc1_clk,
-};
-
-#define DEFINE_CLOCK_CCGR(name, i, er, es, pfx, p, s)	\
-	static struct clk name = {			\
-		.id		= i,			\
-		.enable_reg	= er,			\
-		.enable_shift	= es,			\
-		.get_rate	= pfx##_get_rate,	\
-		.set_rate	= pfx##_set_rate,	\
-		.round_rate	= pfx##_round_rate,	\
-		.set_parent	= pfx##_set_parent,	\
-		.enable		= _clk_ccgr_enable,	\
-		.disable	= _clk_ccgr_disable,	\
-		.parent		= p,			\
-		.secondary	= s,			\
-	}
-
-#define DEFINE_CLOCK_MAX(name, i, er, es, pfx, p, s)	\
-	static struct clk name = {			\
-		.id		= i,			\
-		.enable_reg	= er,			\
-		.enable_shift	= es,			\
-		.get_rate	= pfx##_get_rate,	\
-		.set_rate	= pfx##_set_rate,	\
-		.set_parent	= pfx##_set_parent,	\
-		.enable		= _clk_max_enable,	\
-		.disable	= _clk_max_disable,	\
-		.parent		= p,			\
-		.secondary	= s,			\
-	}
-
-#define CLK_GET_RATE(name, nr, bitsname)				\
-static unsigned long clk_##name##_get_rate(struct clk *clk)		\
-{									\
-	u32 reg, pred, podf;						\
-									\
-	reg = __raw_readl(MXC_CCM_CSCDR##nr);				\
-	pred = (reg & MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_MASK)	\
-		>> MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_OFFSET;	\
-	podf = (reg & MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_MASK)	\
-		>> MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_OFFSET;	\
-									\
-	return DIV_ROUND_CLOSEST(clk_get_rate(clk->parent),		\
-			(pred + 1) * (podf + 1));			\
-}
-
-#define CLK_SET_PARENT(name, nr, bitsname)				\
-static int clk_##name##_set_parent(struct clk *clk, struct clk *parent)	\
-{									\
-	u32 reg, mux;							\
-									\
-	mux = _get_mux(parent, &pll1_sw_clk, &pll2_sw_clk,		\
-			&pll3_sw_clk, &lp_apm_clk);			\
-	reg = __raw_readl(MXC_CCM_CSCMR##nr) &				\
-		~MXC_CCM_CSCMR##nr##_##bitsname##_CLK_SEL_MASK;		\
-	reg |= mux << MXC_CCM_CSCMR##nr##_##bitsname##_CLK_SEL_OFFSET;	\
-	__raw_writel(reg, MXC_CCM_CSCMR##nr);				\
-									\
-	return 0;							\
-}
-
-#define CLK_SET_RATE(name, nr, bitsname)				\
-static int clk_##name##_set_rate(struct clk *clk, unsigned long rate)	\
-{									\
-	u32 reg, div, parent_rate;					\
-	u32 pre = 0, post = 0;						\
-									\
-	parent_rate = clk_get_rate(clk->parent);			\
-	div = parent_rate / rate;					\
-									\
-	if ((parent_rate / div) != rate)				\
-		return -EINVAL;						\
-									\
-	__calc_pre_post_dividers(div, &pre, &post,			\
-		(MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_MASK >>	\
-		MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_OFFSET) + 1,	\
-		(MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_MASK >>	\
-		MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_OFFSET) + 1);\
-									\
-	/* Set sdhc1 clock divider */					\
-	reg = __raw_readl(MXC_CCM_CSCDR##nr) &				\
-		~(MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_MASK	\
-		| MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_MASK);	\
-	reg |= (post - 1) <<						\
-		MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_OFFSET;	\
-	reg |= (pre - 1) <<						\
-		MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_OFFSET;	\
-	__raw_writel(reg, MXC_CCM_CSCDR##nr);				\
-									\
-	return 0;							\
-}
-
-/* UART */
-CLK_GET_RATE(uart, 1, UART)
-CLK_SET_PARENT(uart, 1, UART)
-
-static struct clk uart_root_clk = {
-	.parent = &pll2_sw_clk,
-	.get_rate = clk_uart_get_rate,
-	.set_parent = clk_uart_set_parent,
-};
-
-/* USBOH3 */
-CLK_GET_RATE(usboh3, 1, USBOH3)
-CLK_SET_PARENT(usboh3, 1, USBOH3)
-
-static struct clk usboh3_clk = {
-	.parent = &pll2_sw_clk,
-	.get_rate = clk_usboh3_get_rate,
-	.set_parent = clk_usboh3_set_parent,
-	.enable = _clk_ccgr_enable,
-	.disable = _clk_ccgr_disable,
-	.enable_reg = MXC_CCM_CCGR2,
-	.enable_shift = MXC_CCM_CCGRx_CG14_OFFSET,
-};
-
-static struct clk usb_ahb_clk = {
-	.parent = &ipg_clk,
-	.enable = _clk_ccgr_enable,
-	.disable = _clk_ccgr_disable,
-	.enable_reg = MXC_CCM_CCGR2,
-	.enable_shift = MXC_CCM_CCGRx_CG13_OFFSET,
-};
-
-static int clk_usb_phy1_set_parent(struct clk *clk, struct clk *parent)
-{
-	u32 reg;
-
-	reg = __raw_readl(MXC_CCM_CSCMR1) & ~MXC_CCM_CSCMR1_USB_PHY_CLK_SEL;
-
-	if (parent == &pll3_sw_clk)
-		reg |= 1 << MXC_CCM_CSCMR1_USB_PHY_CLK_SEL_OFFSET;
-
-	__raw_writel(reg, MXC_CCM_CSCMR1);
-
-	return 0;
-}
-
-static struct clk usb_phy1_clk = {
-	.parent = &pll3_sw_clk,
-	.set_parent = clk_usb_phy1_set_parent,
-	.enable = _clk_ccgr_enable,
-	.enable_reg = MXC_CCM_CCGR2,
-	.enable_shift = MXC_CCM_CCGRx_CG0_OFFSET,
-	.disable = _clk_ccgr_disable,
-};
-
-/* eCSPI */
-CLK_GET_RATE(ecspi, 2, CSPI)
-CLK_SET_PARENT(ecspi, 1, CSPI)
-
-static struct clk ecspi_main_clk = {
-	.parent = &pll3_sw_clk,
-	.get_rate = clk_ecspi_get_rate,
-	.set_parent = clk_ecspi_set_parent,
-};
-
-/* eSDHC */
-CLK_GET_RATE(esdhc1, 1, ESDHC1_MSHC1)
-CLK_SET_PARENT(esdhc1, 1, ESDHC1_MSHC1)
-CLK_SET_RATE(esdhc1, 1, ESDHC1_MSHC1)
-
-/* mx51 specific */
-CLK_GET_RATE(esdhc2, 1, ESDHC2_MSHC2)
-CLK_SET_PARENT(esdhc2, 1, ESDHC2_MSHC2)
-CLK_SET_RATE(esdhc2, 1, ESDHC2_MSHC2)
-
-static int clk_esdhc3_set_parent(struct clk *clk, struct clk *parent)
-{
-	u32 reg;
-
-	reg = __raw_readl(MXC_CCM_CSCMR1);
-	if (parent == &esdhc1_clk)
-		reg &= ~MXC_CCM_CSCMR1_ESDHC3_CLK_SEL;
-	else if (parent == &esdhc2_clk)
-		reg |= MXC_CCM_CSCMR1_ESDHC3_CLK_SEL;
-	else
-		return -EINVAL;
-	__raw_writel(reg, MXC_CCM_CSCMR1);
-
-	return 0;
-}
-
-static int clk_esdhc4_set_parent(struct clk *clk, struct clk *parent)
-{
-	u32 reg;
-
-	reg = __raw_readl(MXC_CCM_CSCMR1);
-	if (parent == &esdhc1_clk)
-		reg &= ~MXC_CCM_CSCMR1_ESDHC4_CLK_SEL;
-	else if (parent == &esdhc2_clk)
-		reg |= MXC_CCM_CSCMR1_ESDHC4_CLK_SEL;
-	else
-		return -EINVAL;
-	__raw_writel(reg, MXC_CCM_CSCMR1);
-
-	return 0;
-}
-
-/* mx53 specific */
-static int clk_esdhc2_mx53_set_parent(struct clk *clk, struct clk *parent)
-{
-	u32 reg;
-
-	reg = __raw_readl(MXC_CCM_CSCMR1);
-	if (parent == &esdhc1_clk)
-		reg &= ~MXC_CCM_CSCMR1_ESDHC2_MSHC2_MX53_CLK_SEL;
-	else if (parent == &esdhc3_mx53_clk)
-		reg |= MXC_CCM_CSCMR1_ESDHC2_MSHC2_MX53_CLK_SEL;
-	else
-		return -EINVAL;
-	__raw_writel(reg, MXC_CCM_CSCMR1);
-
-	return 0;
-}
-
-CLK_GET_RATE(esdhc3_mx53, 1, ESDHC3_MX53)
-CLK_SET_PARENT(esdhc3_mx53, 1, ESDHC3_MX53)
-CLK_SET_RATE(esdhc3_mx53, 1, ESDHC3_MX53)
-
-static int clk_esdhc4_mx53_set_parent(struct clk *clk, struct clk *parent)
-{
-	u32 reg;
-
-	reg = __raw_readl(MXC_CCM_CSCMR1);
-	if (parent == &esdhc1_clk)
-		reg &= ~MXC_CCM_CSCMR1_ESDHC4_CLK_SEL;
-	else if (parent == &esdhc3_mx53_clk)
-		reg |= MXC_CCM_CSCMR1_ESDHC4_CLK_SEL;
-	else
-		return -EINVAL;
-	__raw_writel(reg, MXC_CCM_CSCMR1);
-
-	return 0;
-}
-
-#define DEFINE_CLOCK_FULL(name, i, er, es, gr, sr, e, d, p, s)		\
-	static struct clk name = {					\
-		.id		= i,					\
-		.enable_reg	= er,					\
-		.enable_shift	= es,					\
-		.get_rate	= gr,					\
-		.set_rate	= sr,					\
-		.enable		= e,					\
-		.disable	= d,					\
-		.parent		= p,					\
-		.secondary	= s,					\
-	}
-
-#define DEFINE_CLOCK(name, i, er, es, gr, sr, p, s)			\
-	DEFINE_CLOCK_FULL(name, i, er, es, gr, sr, _clk_ccgr_enable, _clk_ccgr_disable, p, s)
-
-/* Shared peripheral bus arbiter */
-DEFINE_CLOCK(spba_clk, 0, MXC_CCM_CCGR5, MXC_CCM_CCGRx_CG0_OFFSET,
-	NULL,  NULL, &ipg_clk, NULL);
-
-/* UART */
-DEFINE_CLOCK(uart1_ipg_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG3_OFFSET,
-	NULL,  NULL, &ipg_clk, &aips_tz1_clk);
-DEFINE_CLOCK(uart2_ipg_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG5_OFFSET,
-	NULL,  NULL, &ipg_clk, &aips_tz1_clk);
-DEFINE_CLOCK(uart3_ipg_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG7_OFFSET,
-	NULL,  NULL, &ipg_clk, &spba_clk);
-DEFINE_CLOCK(uart4_ipg_clk, 3, MXC_CCM_CCGR7, MXC_CCM_CCGRx_CG4_OFFSET,
-	NULL,  NULL, &ipg_clk, &spba_clk);
-DEFINE_CLOCK(uart5_ipg_clk, 4, MXC_CCM_CCGR7, MXC_CCM_CCGRx_CG6_OFFSET,
-	NULL,  NULL, &ipg_clk, &spba_clk);
-DEFINE_CLOCK(uart1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG4_OFFSET,
-	NULL,  NULL, &uart_root_clk, &uart1_ipg_clk);
-DEFINE_CLOCK(uart2_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG6_OFFSET,
-	NULL,  NULL, &uart_root_clk, &uart2_ipg_clk);
-DEFINE_CLOCK(uart3_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG8_OFFSET,
-	NULL,  NULL, &uart_root_clk, &uart3_ipg_clk);
-DEFINE_CLOCK(uart4_clk, 3, MXC_CCM_CCGR7, MXC_CCM_CCGRx_CG5_OFFSET,
-	NULL,  NULL, &uart_root_clk, &uart4_ipg_clk);
-DEFINE_CLOCK(uart5_clk, 4, MXC_CCM_CCGR7, MXC_CCM_CCGRx_CG7_OFFSET,
-	NULL,  NULL, &uart_root_clk, &uart5_ipg_clk);
-
-/* GPT */
-DEFINE_CLOCK(gpt_ipg_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG10_OFFSET,
-	NULL,  NULL, &ipg_clk, NULL);
-DEFINE_CLOCK(gpt_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG9_OFFSET,
-	NULL,  NULL, &ipg_clk, &gpt_ipg_clk);
-
-DEFINE_CLOCK(pwm1_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG6_OFFSET,
-	NULL, NULL, &ipg_perclk, NULL);
-DEFINE_CLOCK(pwm2_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG8_OFFSET,
-	NULL, NULL, &ipg_perclk, NULL);
-
-/* I2C */
-DEFINE_CLOCK(i2c1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG9_OFFSET,
-	NULL, NULL, &ipg_perclk, NULL);
-DEFINE_CLOCK(i2c2_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG10_OFFSET,
-	NULL, NULL, &ipg_perclk, NULL);
-DEFINE_CLOCK(hsi2c_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG11_OFFSET,
-	NULL, NULL, &ipg_clk, NULL);
-DEFINE_CLOCK(i2c3_mx53_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG11_OFFSET,
-	NULL, NULL, &ipg_perclk, NULL);
-
-/* FEC */
-DEFINE_CLOCK(fec_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG12_OFFSET,
-	NULL,  NULL, &ipg_clk, NULL);
-
-/* NFC */
-DEFINE_CLOCK_CCGR(nfc_clk, 0, MXC_CCM_CCGR5, MXC_CCM_CCGRx_CG10_OFFSET,
-	clk_nfc, &emi_slow_clk, NULL);
-
-/* SSI */
-DEFINE_CLOCK(ssi1_ipg_clk, 0, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG8_OFFSET,
-	NULL, NULL, &ipg_clk, NULL);
-DEFINE_CLOCK(ssi1_clk, 0, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG9_OFFSET,
-	NULL, NULL, &pll3_sw_clk, &ssi1_ipg_clk);
-DEFINE_CLOCK(ssi2_ipg_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG10_OFFSET,
-	NULL, NULL, &ipg_clk, NULL);
-DEFINE_CLOCK(ssi2_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG11_OFFSET,
-	NULL, NULL, &pll3_sw_clk, &ssi2_ipg_clk);
-DEFINE_CLOCK(ssi3_ipg_clk, 2, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG12_OFFSET,
-	NULL, NULL, &ipg_clk, NULL);
-DEFINE_CLOCK(ssi3_clk, 2, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG13_OFFSET,
-	NULL, NULL, &pll3_sw_clk, &ssi3_ipg_clk);
-
-/* eCSPI */
-DEFINE_CLOCK_FULL(ecspi1_ipg_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG9_OFFSET,
-		NULL, NULL, _clk_ccgr_enable_inrun, _clk_ccgr_disable,
-		&ipg_clk, &spba_clk);
-DEFINE_CLOCK(ecspi1_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG10_OFFSET,
-		NULL, NULL, &ecspi_main_clk, &ecspi1_ipg_clk);
-DEFINE_CLOCK_FULL(ecspi2_ipg_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG11_OFFSET,
-		NULL, NULL, _clk_ccgr_enable_inrun, _clk_ccgr_disable,
-		&ipg_clk, &aips_tz2_clk);
-DEFINE_CLOCK(ecspi2_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG12_OFFSET,
-		NULL, NULL, &ecspi_main_clk, &ecspi2_ipg_clk);
-
-/* CSPI */
-DEFINE_CLOCK(cspi_ipg_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG9_OFFSET,
-		NULL, NULL, &ipg_clk, &aips_tz2_clk);
-DEFINE_CLOCK(cspi_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG13_OFFSET,
-		NULL, NULL, &ipg_clk, &cspi_ipg_clk);
-
-/* SDMA */
-DEFINE_CLOCK(sdma_clk, 1, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG15_OFFSET,
-		NULL, NULL, &ahb_clk, NULL);
-
-/* eSDHC */
-DEFINE_CLOCK_FULL(esdhc1_ipg_clk, 0, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG0_OFFSET,
-	NULL,  NULL, _clk_max_enable, _clk_max_disable, &ipg_clk, NULL);
-DEFINE_CLOCK_MAX(esdhc1_clk, 0, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG1_OFFSET,
-	clk_esdhc1, &pll2_sw_clk, &esdhc1_ipg_clk);
-DEFINE_CLOCK_FULL(esdhc2_ipg_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG2_OFFSET,
-	NULL,  NULL, _clk_max_enable, _clk_max_disable, &ipg_clk, NULL);
-DEFINE_CLOCK_FULL(esdhc3_ipg_clk, 2, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG4_OFFSET,
-	NULL,  NULL, _clk_max_enable, _clk_max_disable, &ipg_clk, NULL);
-DEFINE_CLOCK_FULL(esdhc4_ipg_clk, 3, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG6_OFFSET,
-	NULL,  NULL, _clk_max_enable, _clk_max_disable, &ipg_clk, NULL);
-
-/* mx51 specific */
-DEFINE_CLOCK_MAX(esdhc2_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG3_OFFSET,
-	clk_esdhc2, &pll2_sw_clk, &esdhc2_ipg_clk);
-
-static struct clk esdhc3_clk = {
-	.id = 2,
-	.parent = &esdhc1_clk,
-	.set_parent = clk_esdhc3_set_parent,
-	.enable_reg = MXC_CCM_CCGR3,
-	.enable_shift = MXC_CCM_CCGRx_CG5_OFFSET,
-	.enable  = _clk_max_enable,
-	.disable = _clk_max_disable,
-	.secondary = &esdhc3_ipg_clk,
-};
-static struct clk esdhc4_clk = {
-	.id = 3,
-	.parent = &esdhc1_clk,
-	.set_parent = clk_esdhc4_set_parent,
-	.enable_reg = MXC_CCM_CCGR3,
-	.enable_shift = MXC_CCM_CCGRx_CG7_OFFSET,
-	.enable  = _clk_max_enable,
-	.disable = _clk_max_disable,
-	.secondary = &esdhc4_ipg_clk,
-};
-
-/* mx53 specific */
-static struct clk esdhc2_mx53_clk = {
-	.id = 2,
-	.parent = &esdhc1_clk,
-	.set_parent = clk_esdhc2_mx53_set_parent,
-	.enable_reg = MXC_CCM_CCGR3,
-	.enable_shift = MXC_CCM_CCGRx_CG3_OFFSET,
-	.enable  = _clk_max_enable,
-	.disable = _clk_max_disable,
-	.secondary = &esdhc3_ipg_clk,
-};
-
-DEFINE_CLOCK_MAX(esdhc3_mx53_clk, 2, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG5_OFFSET,
-	clk_esdhc3_mx53, &pll2_sw_clk, &esdhc2_ipg_clk);
-
-static struct clk esdhc4_mx53_clk = {
-	.id = 3,
-	.parent = &esdhc1_clk,
-	.set_parent = clk_esdhc4_mx53_set_parent,
-	.enable_reg = MXC_CCM_CCGR3,
-	.enable_shift = MXC_CCM_CCGRx_CG7_OFFSET,
-	.enable  = _clk_max_enable,
-	.disable = _clk_max_disable,
-	.secondary = &esdhc4_ipg_clk,
-};
-
-static struct clk sata_clk = {
-	.parent = &ipg_clk,
-	.enable = _clk_max_enable,
-	.enable_reg = MXC_CCM_CCGR4,
-	.enable_shift = MXC_CCM_CCGRx_CG1_OFFSET,
-	.disable = _clk_max_disable,
-};
-
-static struct clk ahci_phy_clk = {
-	.parent = &usb_phy1_clk,
-};
-
-static struct clk ahci_dma_clk = {
-	.parent = &ahb_clk,
-};
-
-DEFINE_CLOCK(mipi_esc_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG5_OFFSET, NULL, NULL, NULL, &pll2_sw_clk);
-DEFINE_CLOCK(mipi_hsc2_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG4_OFFSET, NULL, NULL, &mipi_esc_clk, &pll2_sw_clk);
-DEFINE_CLOCK(mipi_hsc1_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG3_OFFSET, NULL, NULL, &mipi_hsc2_clk, &pll2_sw_clk);
-
-/* IPU */
-DEFINE_CLOCK_FULL(ipu_clk, 0, MXC_CCM_CCGR5, MXC_CCM_CCGRx_CG5_OFFSET,
-	NULL,  NULL, clk_ipu_enable, clk_ipu_disable, &ahb_clk, &ipu_sec_clk);
-
-DEFINE_CLOCK_FULL(emi_fast_clk, 0, MXC_CCM_CCGR5, MXC_CCM_CCGRx_CG7_OFFSET,
-		NULL, NULL, _clk_ccgr_enable, _clk_ccgr_disable_inwait,
-		&ddr_clk, NULL);
-
-DEFINE_CLOCK(ipu_di0_clk, 0, MXC_CCM_CCGR6, MXC_CCM_CCGRx_CG5_OFFSET,
-		NULL, NULL, &pll3_sw_clk, NULL);
-DEFINE_CLOCK(ipu_di1_clk, 0, MXC_CCM_CCGR6, MXC_CCM_CCGRx_CG6_OFFSET,
-		NULL, NULL, &pll3_sw_clk, NULL);
-
-/* PATA */
-DEFINE_CLOCK(pata_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG0_OFFSET,
-		NULL, NULL, &ipg_clk, &spba_clk);
-
-#define _REGISTER_CLOCK(d, n, c) \
-       { \
-		.dev_id = d, \
-		.con_id = n, \
-		.clk = &c,   \
-       },
-
-static struct clk_lookup mx51_lookups[] = {
-	/* i.mx51 has the i.mx21 type uart */
-	_REGISTER_CLOCK("imx21-uart.0", NULL, uart1_clk)
-	_REGISTER_CLOCK("imx21-uart.1", NULL, uart2_clk)
-	_REGISTER_CLOCK("imx21-uart.2", NULL, uart3_clk)
-	_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
-	/* i.mx51 has the i.mx27 type fec */
-	_REGISTER_CLOCK("imx27-fec.0", NULL, fec_clk)
-	_REGISTER_CLOCK("mxc_pwm.0", "pwm", pwm1_clk)
-	_REGISTER_CLOCK("mxc_pwm.1", "pwm", pwm2_clk)
-	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
-	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
-	_REGISTER_CLOCK("imx-i2c.2", NULL, hsi2c_clk)
-	_REGISTER_CLOCK("mxc-ehci.0", "usb", usboh3_clk)
-	_REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", usb_ahb_clk)
-	_REGISTER_CLOCK("mxc-ehci.0", "usb_phy1", usb_phy1_clk)
-	_REGISTER_CLOCK("mxc-ehci.1", "usb", usboh3_clk)
-	_REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", usb_ahb_clk)
-	_REGISTER_CLOCK("mxc-ehci.2", "usb", usboh3_clk)
-	_REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_ahb_clk)
-	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usboh3_clk)
-	_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", ahb_clk)
-	_REGISTER_CLOCK("imx-keypad", NULL, dummy_clk)
-	_REGISTER_CLOCK("mxc_nand", NULL, nfc_clk)
-	_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
-	_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
-	_REGISTER_CLOCK("imx-ssi.2", NULL, ssi3_clk)
-	/* i.mx51 has the i.mx35 type sdma */
-	_REGISTER_CLOCK("imx35-sdma", NULL, sdma_clk)
-	_REGISTER_CLOCK(NULL, "ckih", ckih_clk)
-	_REGISTER_CLOCK(NULL, "ckih2", ckih2_clk)
-	_REGISTER_CLOCK(NULL, "gpt_32k", gpt_32k_clk)
-	_REGISTER_CLOCK("imx51-ecspi.0", NULL, ecspi1_clk)
-	_REGISTER_CLOCK("imx51-ecspi.1", NULL, ecspi2_clk)
-	/* i.mx51 has the i.mx35 type cspi */
-	_REGISTER_CLOCK("imx35-cspi.0", NULL, cspi_clk)
-	_REGISTER_CLOCK("sdhci-esdhc-imx51.0", NULL, esdhc1_clk)
-	_REGISTER_CLOCK("sdhci-esdhc-imx51.1", NULL, esdhc2_clk)
-	_REGISTER_CLOCK("sdhci-esdhc-imx51.2", NULL, esdhc3_clk)
-	_REGISTER_CLOCK("sdhci-esdhc-imx51.3", NULL, esdhc4_clk)
-	_REGISTER_CLOCK(NULL, "cpu_clk", cpu_clk)
-	_REGISTER_CLOCK(NULL, "iim_clk", iim_clk)
-	_REGISTER_CLOCK("imx2-wdt.0", NULL, dummy_clk)
-	_REGISTER_CLOCK("imx2-wdt.1", NULL, dummy_clk)
-	_REGISTER_CLOCK(NULL, "mipi_hsp", mipi_hsp_clk)
-	_REGISTER_CLOCK("imx-ipuv3", NULL, ipu_clk)
-	_REGISTER_CLOCK("imx-ipuv3", "di0", ipu_di0_clk)
-	_REGISTER_CLOCK("imx-ipuv3", "di1", ipu_di1_clk)
-	_REGISTER_CLOCK(NULL, "gpc_dvfs", gpc_dvfs_clk)
-	_REGISTER_CLOCK("pata_imx", NULL, pata_clk)
-};
-
-static struct clk_lookup mx53_lookups[] = {
-	/* i.mx53 has the i.mx21 type uart */
-	_REGISTER_CLOCK("imx21-uart.0", NULL, uart1_clk)
-	_REGISTER_CLOCK("imx21-uart.1", NULL, uart2_clk)
-	_REGISTER_CLOCK("imx21-uart.2", NULL, uart3_clk)
-	_REGISTER_CLOCK("imx21-uart.3", NULL, uart4_clk)
-	_REGISTER_CLOCK("imx21-uart.4", NULL, uart5_clk)
-	_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
-	/* i.mx53 has the i.mx25 type fec */
-	_REGISTER_CLOCK("imx25-fec.0", NULL, fec_clk)
-	_REGISTER_CLOCK(NULL, "iim_clk", iim_clk)
-	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
-	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
-	_REGISTER_CLOCK("imx-i2c.2", NULL, i2c3_mx53_clk)
-	/* i.mx53 has the i.mx51 type ecspi */
-	_REGISTER_CLOCK("imx51-ecspi.0", NULL, ecspi1_clk)
-	_REGISTER_CLOCK("imx51-ecspi.1", NULL, ecspi2_clk)
-	/* i.mx53 has the i.mx25 type cspi */
-	_REGISTER_CLOCK("imx35-cspi.0", NULL, cspi_clk)
-	_REGISTER_CLOCK("sdhci-esdhc-imx53.0", NULL, esdhc1_clk)
-	_REGISTER_CLOCK("sdhci-esdhc-imx53.1", NULL, esdhc2_mx53_clk)
-	_REGISTER_CLOCK("sdhci-esdhc-imx53.2", NULL, esdhc3_mx53_clk)
-	_REGISTER_CLOCK("sdhci-esdhc-imx53.3", NULL, esdhc4_mx53_clk)
-	_REGISTER_CLOCK("imx2-wdt.0", NULL, dummy_clk)
-	_REGISTER_CLOCK("imx2-wdt.1", NULL, dummy_clk)
-	/* i.mx53 has the i.mx35 type sdma */
-	_REGISTER_CLOCK("imx35-sdma", NULL, sdma_clk)
-	_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
-	_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
-	_REGISTER_CLOCK("imx-ssi.2", NULL, ssi3_clk)
-	_REGISTER_CLOCK("imx-keypad", NULL, dummy_clk)
-	_REGISTER_CLOCK("pata_imx", NULL, pata_clk)
-	_REGISTER_CLOCK("imx53-ahci.0", "ahci", sata_clk)
-	_REGISTER_CLOCK("imx53-ahci.0", "ahci_phy", ahci_phy_clk)
-	_REGISTER_CLOCK("imx53-ahci.0", "ahci_dma", ahci_dma_clk)
-};
-
-static void clk_tree_init(void)
-{
-	u32 reg;
-
-	ipg_perclk.set_parent(&ipg_perclk, &lp_apm_clk);
-
-	/*
-	 * Initialise the IPG PER CLK dividers to 3. IPG_PER_CLK should be at
-	 * 8MHz, its derived from lp_apm.
-	 *
-	 * FIXME: Verify if true for all boards
-	 */
-	reg = __raw_readl(MXC_CCM_CBCDR);
-	reg &= ~MXC_CCM_CBCDR_PERCLK_PRED1_MASK;
-	reg &= ~MXC_CCM_CBCDR_PERCLK_PRED2_MASK;
-	reg &= ~MXC_CCM_CBCDR_PERCLK_PODF_MASK;
-	reg |= (2 << MXC_CCM_CBCDR_PERCLK_PRED1_OFFSET);
-	__raw_writel(reg, MXC_CCM_CBCDR);
-}
-
-int __init mx51_clocks_init(unsigned long ckil, unsigned long osc,
-			unsigned long ckih1, unsigned long ckih2)
-{
-	int i;
-
-	external_low_reference = ckil;
-	external_high_reference = ckih1;
-	ckih2_reference = ckih2;
-	oscillator_reference = osc;
-
-	for (i = 0; i < ARRAY_SIZE(mx51_lookups); i++)
-		clkdev_add(&mx51_lookups[i]);
-
-	clk_tree_init();
-
-	clk_enable(&cpu_clk);
-	clk_enable(&main_bus_clk);
-
-	clk_enable(&iim_clk);
-	imx_print_silicon_rev("i.MX51", mx51_revision());
-	clk_disable(&iim_clk);
-
-	/* move usb_phy_clk to 24MHz */
-	clk_set_parent(&usb_phy1_clk, &osc_clk);
-
-	/* set the usboh3_clk parent to pll2_sw_clk */
-	clk_set_parent(&usboh3_clk, &pll2_sw_clk);
-
-	/* Set SDHC parents to be PLL2 */
-	clk_set_parent(&esdhc1_clk, &pll2_sw_clk);
-	clk_set_parent(&esdhc2_clk, &pll2_sw_clk);
-
-	/* set SDHC root clock as 166.25MHZ*/
-	clk_set_rate(&esdhc1_clk, 166250000);
-	clk_set_rate(&esdhc2_clk, 166250000);
-
-	/* System timer */
-	mxc_timer_init(&gpt_clk, MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR),
-		MX51_INT_GPT);
-	return 0;
-}
-
-int __init mx53_clocks_init(unsigned long ckil, unsigned long osc,
-			unsigned long ckih1, unsigned long ckih2)
-{
-	int i;
-
-	external_low_reference = ckil;
-	external_high_reference = ckih1;
-	ckih2_reference = ckih2;
-	oscillator_reference = osc;
-
-	for (i = 0; i < ARRAY_SIZE(mx53_lookups); i++)
-		clkdev_add(&mx53_lookups[i]);
-
-	clk_tree_init();
-
-	clk_set_parent(&uart_root_clk, &pll3_sw_clk);
-	clk_enable(&cpu_clk);
-	clk_enable(&main_bus_clk);
-
-	clk_enable(&iim_clk);
-	imx_print_silicon_rev("i.MX53", mx53_revision());
-	clk_disable(&iim_clk);
-
-	/* Set SDHC parents to be PLL2 */
-	clk_set_parent(&esdhc1_clk, &pll2_sw_clk);
-	clk_set_parent(&esdhc3_mx53_clk, &pll2_sw_clk);
-
-	/* set SDHC root clock as 200MHZ*/
-	clk_set_rate(&esdhc1_clk, 200000000);
-	clk_set_rate(&esdhc3_mx53_clk, 200000000);
-
-	/* System timer */
-	mxc_timer_init(&gpt_clk, MX53_IO_ADDRESS(MX53_GPT1_BASE_ADDR),
-		MX53_INT_GPT);
-	return 0;
-}
-
-#ifdef CONFIG_OF
-static void __init clk_get_freq_dt(unsigned long *ckil, unsigned long *osc,
-				   unsigned long *ckih1, unsigned long *ckih2)
-{
-	struct device_node *np;
-
-	/* retrieve the freqency of fixed clocks from device tree */
-	for_each_compatible_node(np, NULL, "fixed-clock") {
-		u32 rate;
-		if (of_property_read_u32(np, "clock-frequency", &rate))
-			continue;
-
-		if (of_device_is_compatible(np, "fsl,imx-ckil"))
-			*ckil = rate;
-		else if (of_device_is_compatible(np, "fsl,imx-osc"))
-			*osc = rate;
-		else if (of_device_is_compatible(np, "fsl,imx-ckih1"))
-			*ckih1 = rate;
-		else if (of_device_is_compatible(np, "fsl,imx-ckih2"))
-			*ckih2 = rate;
-	}
-}
-
-int __init mx51_clocks_init_dt(void)
-{
-	unsigned long ckil, osc, ckih1, ckih2;
-
-	clk_get_freq_dt(&ckil, &osc, &ckih1, &ckih2);
-	return mx51_clocks_init(ckil, osc, ckih1, ckih2);
-}
-
-int __init mx53_clocks_init_dt(void)
-{
-	unsigned long ckil, osc, ckih1, ckih2;
-
-	clk_get_freq_dt(&ckil, &osc, &ckih1, &ckih2);
-	return mx53_clocks_init(ckil, osc, ckih1, ckih2);
-}
-#endif
diff --git a/arch/arm/mach-imx/cpu-imx5.c b/arch/arm/mach-imx/cpu-imx5.c
index aa15c517d06e..8eb15a2fcaf9 100644
--- a/arch/arm/mach-imx/cpu-imx5.c
+++ b/arch/arm/mach-imx/cpu-imx5.c
@@ -62,11 +62,8 @@ EXPORT_SYMBOL(mx51_revision);
  * Dependent on link order - so the assumption is that vfp_init is called
  * before us.
  */
-static int __init mx51_neon_fixup(void)
+int __init mx51_neon_fixup(void)
 {
-	if (!cpu_is_mx51())
-		return 0;
-
 	if (mx51_revision() < IMX_CHIP_REVISION_3_0 &&
 			(elf_hwcap & HWCAP_NEON)) {
 		elf_hwcap &= ~HWCAP_NEON;
@@ -75,7 +72,6 @@ static int __init mx51_neon_fixup(void)
 	return 0;
 }
 
-late_initcall(mx51_neon_fixup);
 #endif
 
 static int get_mx53_srev(void)
diff --git a/arch/arm/mach-imx/crmregs-imx3.h b/arch/arm/mach-imx/crmregs-imx3.h
index 53141273df45..a1dfde53e335 100644
--- a/arch/arm/mach-imx/crmregs-imx3.h
+++ b/arch/arm/mach-imx/crmregs-imx3.h
@@ -24,48 +24,47 @@
 #define CKIH_CLK_FREQ_27MHZ     27000000
 #define CKIL_CLK_FREQ           32768
 
-#define MXC_CCM_BASE		(cpu_is_mx31() ? \
-MX31_IO_ADDRESS(MX31_CCM_BASE_ADDR) : MX35_IO_ADDRESS(MX35_CCM_BASE_ADDR))
+extern void __iomem *mx3_ccm_base;
 
 /* Register addresses */
-#define MXC_CCM_CCMR		(MXC_CCM_BASE + 0x00)
-#define MXC_CCM_PDR0		(MXC_CCM_BASE + 0x04)
-#define MXC_CCM_PDR1		(MXC_CCM_BASE + 0x08)
-#define MX35_CCM_PDR2		(MXC_CCM_BASE + 0x0C)
-#define MXC_CCM_RCSR		(MXC_CCM_BASE + 0x0C)
-#define MX35_CCM_PDR3		(MXC_CCM_BASE + 0x10)
-#define MXC_CCM_MPCTL		(MXC_CCM_BASE + 0x10)
-#define MX35_CCM_PDR4		(MXC_CCM_BASE + 0x14)
-#define MXC_CCM_UPCTL		(MXC_CCM_BASE + 0x14)
-#define MX35_CCM_RCSR		(MXC_CCM_BASE + 0x18)
-#define MXC_CCM_SRPCTL		(MXC_CCM_BASE + 0x18)
-#define MX35_CCM_MPCTL		(MXC_CCM_BASE + 0x1C)
-#define MXC_CCM_COSR		(MXC_CCM_BASE + 0x1C)
-#define MX35_CCM_PPCTL		(MXC_CCM_BASE + 0x20)
-#define MXC_CCM_CGR0		(MXC_CCM_BASE + 0x20)
-#define MX35_CCM_ACMR		(MXC_CCM_BASE + 0x24)
-#define MXC_CCM_CGR1		(MXC_CCM_BASE + 0x24)
-#define MX35_CCM_COSR		(MXC_CCM_BASE + 0x28)
-#define MXC_CCM_CGR2		(MXC_CCM_BASE + 0x28)
-#define MX35_CCM_CGR0		(MXC_CCM_BASE + 0x2C)
-#define MXC_CCM_WIMR		(MXC_CCM_BASE + 0x2C)
-#define MX35_CCM_CGR1		(MXC_CCM_BASE + 0x30)
-#define MXC_CCM_LDC		(MXC_CCM_BASE + 0x30)
-#define MX35_CCM_CGR2		(MXC_CCM_BASE + 0x34)
-#define MXC_CCM_DCVR0		(MXC_CCM_BASE + 0x34)
-#define MX35_CCM_CGR3		(MXC_CCM_BASE + 0x38)
-#define MXC_CCM_DCVR1		(MXC_CCM_BASE + 0x38)
-#define MXC_CCM_DCVR2		(MXC_CCM_BASE + 0x3C)
-#define MXC_CCM_DCVR3		(MXC_CCM_BASE + 0x40)
-#define MXC_CCM_LTR0		(MXC_CCM_BASE + 0x44)
-#define MXC_CCM_LTR1		(MXC_CCM_BASE + 0x48)
-#define MXC_CCM_LTR2		(MXC_CCM_BASE + 0x4C)
-#define MXC_CCM_LTR3		(MXC_CCM_BASE + 0x50)
-#define MXC_CCM_LTBR0		(MXC_CCM_BASE + 0x54)
-#define MXC_CCM_LTBR1		(MXC_CCM_BASE + 0x58)
-#define MXC_CCM_PMCR0		(MXC_CCM_BASE + 0x5C)
-#define MXC_CCM_PMCR1		(MXC_CCM_BASE + 0x60)
-#define MXC_CCM_PDR2		(MXC_CCM_BASE + 0x64)
+#define MXC_CCM_CCMR		0x00
+#define MXC_CCM_PDR0		0x04
+#define MXC_CCM_PDR1		0x08
+#define MX35_CCM_PDR2		0x0C
+#define MXC_CCM_RCSR		0x0C
+#define MX35_CCM_PDR3		0x10
+#define MXC_CCM_MPCTL		0x10
+#define MX35_CCM_PDR4		0x14
+#define MXC_CCM_UPCTL		0x14
+#define MX35_CCM_RCSR		0x18
+#define MXC_CCM_SRPCTL		0x18
+#define MX35_CCM_MPCTL		0x1C
+#define MXC_CCM_COSR		0x1C
+#define MX35_CCM_PPCTL		0x20
+#define MXC_CCM_CGR0		0x20
+#define MX35_CCM_ACMR		0x24
+#define MXC_CCM_CGR1		0x24
+#define MX35_CCM_COSR		0x28
+#define MXC_CCM_CGR2		0x28
+#define MX35_CCM_CGR0		0x2C
+#define MXC_CCM_WIMR		0x2C
+#define MX35_CCM_CGR1		0x30
+#define MXC_CCM_LDC		0x30
+#define MX35_CCM_CGR2		0x34
+#define MXC_CCM_DCVR0		0x34
+#define MX35_CCM_CGR3		0x38
+#define MXC_CCM_DCVR1		0x38
+#define MXC_CCM_DCVR2		0x3C
+#define MXC_CCM_DCVR3		0x40
+#define MXC_CCM_LTR0		0x44
+#define MXC_CCM_LTR1		0x48
+#define MXC_CCM_LTR2		0x4C
+#define MXC_CCM_LTR3		0x50
+#define MXC_CCM_LTBR0		0x54
+#define MXC_CCM_LTBR1		0x58
+#define MXC_CCM_PMCR0		0x5C
+#define MXC_CCM_PMCR1		0x60
+#define MXC_CCM_PDR2		0x64
 
 /* Register bit definitions */
 #define MXC_CCM_CCMR_WBEN                       (1 << 27)
diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
index 5f2f91d1798b..b46cab0ced53 100644
--- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
+++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
@@ -243,7 +243,7 @@ static const struct imxuart_platform_data uart_pdata __initconst = {
 static void __maybe_unused ads7846_dev_init(void)
 {
 	if (gpio_request(ADS7846_PENDOWN, "ADS7846 pendown") < 0) {
-		printk(KERN_ERR "can't get ads746 pen down GPIO\n");
+		printk(KERN_ERR "can't get ads7846 pen down GPIO\n");
 		return;
 	}
 	gpio_direction_input(ADS7846_PENDOWN);
diff --git a/arch/arm/mach-imx/eukrea_mbimx51-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx51-baseboard.c
deleted file mode 100644
index a6a3ab8f1b1c..000000000000
--- a/arch/arm/mach-imx/eukrea_mbimx51-baseboard.c
+++ /dev/null
@@ -1,206 +0,0 @@
-/*
- *
- * Copyright (C) 2010 Eric Bénard <eric@eukrea.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/i2c/tsc2007.h>
-#include <linux/leds.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx51.h>
-
-#include <asm/mach/arch.h>
-
-#include "devices-imx51.h"
-
-#define MBIMX51_TSC2007_GPIO	IMX_GPIO_NR(3, 30)
-#define MBIMX51_LED0		IMX_GPIO_NR(3, 5)
-#define MBIMX51_LED1		IMX_GPIO_NR(3, 6)
-#define MBIMX51_LED2		IMX_GPIO_NR(3, 7)
-#define MBIMX51_LED3		IMX_GPIO_NR(3, 8)
-
-static const struct gpio_led mbimx51_leds[] __initconst = {
-	{
-		.name			= "led0",
-		.default_trigger	= "heartbeat",
-		.active_low		= 1,
-		.gpio			= MBIMX51_LED0,
-	},
-	{
-		.name			= "led1",
-		.default_trigger	= "nand-disk",
-		.active_low		= 1,
-		.gpio			= MBIMX51_LED1,
-	},
-	{
-		.name			= "led2",
-		.default_trigger	= "mmc0",
-		.active_low		= 1,
-		.gpio			= MBIMX51_LED2,
-	},
-	{
-		.name			= "led3",
-		.default_trigger	= "default-on",
-		.active_low		= 1,
-		.gpio			= MBIMX51_LED3,
-	},
-};
-
-static const struct gpio_led_platform_data mbimx51_leds_info __initconst = {
-	.leds		= mbimx51_leds,
-	.num_leds	= ARRAY_SIZE(mbimx51_leds),
-};
-
-static iomux_v3_cfg_t mbimx51_pads[] = {
-	/* UART2 */
-	MX51_PAD_UART2_RXD__UART2_RXD,
-	MX51_PAD_UART2_TXD__UART2_TXD,
-
-	/* UART3 */
-	MX51_PAD_UART3_RXD__UART3_RXD,
-	MX51_PAD_UART3_TXD__UART3_TXD,
-	MX51_PAD_KEY_COL4__UART3_RTS,
-	MX51_PAD_KEY_COL5__UART3_CTS,
-
-	/* TSC2007 IRQ */
-	MX51_PAD_NANDF_D10__GPIO3_30,
-
-	/* LEDS */
-	MX51_PAD_DISPB2_SER_DIN__GPIO3_5,
-	MX51_PAD_DISPB2_SER_DIO__GPIO3_6,
-	MX51_PAD_DISPB2_SER_CLK__GPIO3_7,
-	MX51_PAD_DISPB2_SER_RS__GPIO3_8,
-
-	/* KPP */
-	MX51_PAD_KEY_ROW0__KEY_ROW0,
-	MX51_PAD_KEY_ROW1__KEY_ROW1,
-	MX51_PAD_KEY_ROW2__KEY_ROW2,
-	MX51_PAD_KEY_ROW3__KEY_ROW3,
-	MX51_PAD_KEY_COL0__KEY_COL0,
-	MX51_PAD_KEY_COL1__KEY_COL1,
-	MX51_PAD_KEY_COL2__KEY_COL2,
-	MX51_PAD_KEY_COL3__KEY_COL3,
-
-	/* SD 1 */
-	MX51_PAD_SD1_CMD__SD1_CMD,
-	MX51_PAD_SD1_CLK__SD1_CLK,
-	MX51_PAD_SD1_DATA0__SD1_DATA0,
-	MX51_PAD_SD1_DATA1__SD1_DATA1,
-	MX51_PAD_SD1_DATA2__SD1_DATA2,
-	MX51_PAD_SD1_DATA3__SD1_DATA3,
-
-	/* SD 2 */
-	MX51_PAD_SD2_CMD__SD2_CMD,
-	MX51_PAD_SD2_CLK__SD2_CLK,
-	MX51_PAD_SD2_DATA0__SD2_DATA0,
-	MX51_PAD_SD2_DATA1__SD2_DATA1,
-	MX51_PAD_SD2_DATA2__SD2_DATA2,
-	MX51_PAD_SD2_DATA3__SD2_DATA3,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static int mbimx51_keymap[] = {
-	KEY(0, 0, KEY_1),
-	KEY(0, 1, KEY_2),
-	KEY(0, 2, KEY_3),
-	KEY(0, 3, KEY_UP),
-
-	KEY(1, 0, KEY_4),
-	KEY(1, 1, KEY_5),
-	KEY(1, 2, KEY_6),
-	KEY(1, 3, KEY_LEFT),
-
-	KEY(2, 0, KEY_7),
-	KEY(2, 1, KEY_8),
-	KEY(2, 2, KEY_9),
-	KEY(2, 3, KEY_RIGHT),
-
-	KEY(3, 0, KEY_0),
-	KEY(3, 1, KEY_DOWN),
-	KEY(3, 2, KEY_ESC),
-	KEY(3, 3, KEY_ENTER),
-};
-
-static const struct matrix_keymap_data mbimx51_map_data __initconst = {
-	.keymap		= mbimx51_keymap,
-	.keymap_size	= ARRAY_SIZE(mbimx51_keymap),
-};
-
-static int tsc2007_get_pendown_state(void)
-{
-	return !gpio_get_value(MBIMX51_TSC2007_GPIO);
-}
-
-struct tsc2007_platform_data tsc2007_data = {
-	.model = 2007,
-	.x_plate_ohms = 180,
-	.get_pendown_state = tsc2007_get_pendown_state,
-};
-
-static struct i2c_board_info mbimx51_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("tsc2007", 0x49),
-		.irq  = IMX_GPIO_TO_IRQ(MBIMX51_TSC2007_GPIO),
-		.platform_data = &tsc2007_data,
-	}, {
-		I2C_BOARD_INFO("tlv320aic23", 0x1a),
-	},
-};
-
-/*
- * baseboard initialization.
- */
-void __init eukrea_mbimx51_baseboard_init(void)
-{
-	mxc_iomux_v3_setup_multiple_pads(mbimx51_pads,
-					ARRAY_SIZE(mbimx51_pads));
-
-	imx51_add_imx_uart(1, NULL);
-	imx51_add_imx_uart(2, &uart_pdata);
-
-	gpio_request(MBIMX51_LED0, "LED0");
-	gpio_direction_output(MBIMX51_LED0, 1);
-	gpio_free(MBIMX51_LED0);
-	gpio_request(MBIMX51_LED1, "LED1");
-	gpio_direction_output(MBIMX51_LED1, 1);
-	gpio_free(MBIMX51_LED1);
-	gpio_request(MBIMX51_LED2, "LED2");
-	gpio_direction_output(MBIMX51_LED2, 1);
-	gpio_free(MBIMX51_LED2);
-	gpio_request(MBIMX51_LED3, "LED3");
-	gpio_direction_output(MBIMX51_LED3, 1);
-	gpio_free(MBIMX51_LED3);
-
-	gpio_led_register_device(-1, &mbimx51_leds_info);
-
-	imx51_add_imx_keypad(&mbimx51_map_data);
-
-	gpio_request(MBIMX51_TSC2007_GPIO, "tsc2007_irq");
-	gpio_direction_input(MBIMX51_TSC2007_GPIO);
-	irq_set_irq_type(gpio_to_irq(MBIMX51_TSC2007_GPIO),
-					IRQF_TRIGGER_FALLING);
-	i2c_register_board_info(1, mbimx51_i2c_devices,
-				ARRAY_SIZE(mbimx51_i2c_devices));
-
-	imx51_add_sdhci_esdhc_imx(0, NULL);
-	imx51_add_sdhci_esdhc_imx(1, NULL);
-}
diff --git a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
index 2cf603e11c4f..dfd2da87c2df 100644
--- a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
+++ b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
@@ -23,6 +23,7 @@
 #include <linux/leds.h>
 #include <linux/platform_device.h>
 #include <linux/input.h>
+#include <linux/spi/spi.h>
 #include <video/platform_lcd.h>
 
 #include <mach/hardware.h>
@@ -87,12 +88,22 @@ static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
 	/* CAN */
 	MX25_PAD_GPIO_D__CAN2_RX,
 	MX25_PAD_GPIO_C__CAN2_TX,
+	/* SPI1 */
+	MX25_PAD_CSPI1_MOSI__CSPI1_MOSI,
+	MX25_PAD_CSPI1_MISO__CSPI1_MISO,
+	MX25_PAD_CSPI1_SS0__GPIO_1_16,
+	MX25_PAD_CSPI1_SS1__GPIO_1_17,
+	MX25_PAD_CSPI1_SCLK__CSPI1_SCLK,
+	MX25_PAD_CSPI1_RDY__GPIO_2_22,
 };
 
-#define GPIO_LED1	83
-#define GPIO_SWITCH1	82
-#define GPIO_SD1CD	52
-#define GPIO_LCDPWR	26
+#define GPIO_LED1		IMX_GPIO_NR(3, 19)
+#define GPIO_SWITCH1	IMX_GPIO_NR(3, 18)
+#define GPIO_SD1CD		IMX_GPIO_NR(2, 20)
+#define GPIO_LCDPWR		IMX_GPIO_NR(1, 26)
+#define	GPIO_SPI1_SS0	IMX_GPIO_NR(1, 16)
+#define	GPIO_SPI1_SS1	IMX_GPIO_NR(1, 17)
+#define	GPIO_SPI1_IRQ	IMX_GPIO_NR(2, 22)
 
 static struct imx_fb_videomode eukrea_mximxsd_modes[] = {
 	{
@@ -228,6 +239,30 @@ static struct esdhc_platform_data sd1_pdata = {
 	.wp_type = ESDHC_WP_NONE,
 };
 
+static struct spi_board_info eukrea_mbimxsd25_spi_board_info[] __initdata = {
+	{
+		.modalias = "spidev",
+		.max_speed_hz = 20000000,
+		.bus_num = 0,
+		.chip_select = 0,
+		.mode = SPI_MODE_0,
+	},
+	{
+		.modalias = "spidev",
+		.max_speed_hz = 20000000,
+		.bus_num = 0,
+		.chip_select = 1,
+		.mode = SPI_MODE_0,
+	},
+};
+
+static int eukrea_mbimxsd25_spi_cs[] = {GPIO_SPI1_SS0, GPIO_SPI1_SS1};
+
+static const struct spi_imx_master eukrea_mbimxsd25_spi0_data __initconst = {
+	.chipselect     = eukrea_mbimxsd25_spi_cs,
+	.num_chipselect = ARRAY_SIZE(eukrea_mbimxsd25_spi_cs),
+};
+
 /*
  * system init for baseboard usage. Will be called by cpuimx25 init.
  *
@@ -257,11 +292,17 @@ void __init eukrea_mbimxsd25_baseboard_init(void)
 
 	gpio_request(GPIO_LCDPWR, "LCDPWR");
 	gpio_direction_output(GPIO_LCDPWR, 1);
-	gpio_free(GPIO_SWITCH1);
 
 	i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices,
 				ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
 
+	gpio_request(GPIO_SPI1_IRQ, "SPI1_IRQ");
+	gpio_direction_input(GPIO_SPI1_IRQ);
+	gpio_free(GPIO_SPI1_IRQ);
+	imx25_add_spi_imx0(&eukrea_mbimxsd25_spi0_data);
+	spi_register_board_info(eukrea_mbimxsd25_spi_board_info,
+		ARRAY_SIZE(eukrea_mbimxsd25_spi_board_info));
+
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 	gpio_led_register_device(-1, &eukrea_mbimxsd_led_info);
 	imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
diff --git a/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c
index fd8bf8a425a7..557f6c486053 100644
--- a/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c
+++ b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c
@@ -27,6 +27,7 @@
 #include <linux/leds.h>
 #include <linux/platform_device.h>
 #include <linux/input.h>
+#include <linux/spi/spi.h>
 #include <video/platform_lcd.h>
 #include <linux/i2c.h>
 
@@ -158,12 +159,22 @@ static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
 	MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
 	/* SD1 CD */
 	MX35_PAD_LD18__GPIO3_24,
+	/* SPI */
+	MX35_PAD_CSPI1_MOSI__CSPI1_MOSI,
+	MX35_PAD_CSPI1_MISO__CSPI1_MISO,
+	MX35_PAD_CSPI1_SS0__GPIO1_18,
+	MX35_PAD_CSPI1_SS1__GPIO1_19,
+	MX35_PAD_CSPI1_SCLK__CSPI1_SCLK,
+	MX35_PAD_CSPI1_SPI_RDY__GPIO3_5,
 };
 
 #define GPIO_LED1	IMX_GPIO_NR(3, 29)
 #define GPIO_SWITCH1	IMX_GPIO_NR(3, 25)
 #define GPIO_LCDPWR	IMX_GPIO_NR(1, 4)
 #define GPIO_SD1CD	IMX_GPIO_NR(3, 24)
+#define	GPIO_SPI1_SS0	IMX_GPIO_NR(1, 18)
+#define	GPIO_SPI1_SS1	IMX_GPIO_NR(1, 19)
+#define	GPIO_SPI1_IRQ	IMX_GPIO_NR(3, 5)
 
 static void eukrea_mbimxsd_lcd_power_set(struct plat_lcd_data *pd,
 				   unsigned int power)
@@ -239,6 +250,30 @@ static struct esdhc_platform_data sd1_pdata = {
 	.wp_type = ESDHC_WP_NONE,
 };
 
+static struct spi_board_info eukrea_mbimxsd35_spi_board_info[] __initdata = {
+	{
+		.modalias = "spidev",
+		.max_speed_hz = 20000000,
+		.bus_num = 0,
+		.chip_select = 0,
+		.mode = SPI_MODE_0,
+	},
+	{
+		.modalias = "spidev",
+		.max_speed_hz = 20000000,
+		.bus_num = 0,
+		.chip_select = 1,
+		.mode = SPI_MODE_0,
+	},
+};
+
+static int eukrea_mbimxsd35_spi_cs[] = {GPIO_SPI1_SS0, GPIO_SPI1_SS1};
+
+static const struct spi_imx_master eukrea_mbimxsd35_spi0_data __initconst = {
+	.chipselect     = eukrea_mbimxsd35_spi_cs,
+	.num_chipselect = ARRAY_SIZE(eukrea_mbimxsd35_spi_cs),
+};
+
 /*
  * system init for baseboard usage. Will be called by cpuimx35 init.
  *
@@ -274,6 +309,13 @@ void __init eukrea_mbimxsd35_baseboard_init(void)
 	i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices,
 				ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
 
+	gpio_request(GPIO_SPI1_IRQ, "SPI1_IRQ");
+	gpio_direction_input(GPIO_SPI1_IRQ);
+	gpio_free(GPIO_SPI1_IRQ);
+	imx35_add_spi_imx0(&eukrea_mbimxsd35_spi0_data);
+	spi_register_board_info(eukrea_mbimxsd35_spi_board_info,
+		ARRAY_SIZE(eukrea_mbimxsd35_spi_board_info));
+
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 	gpio_led_register_device(-1, &eukrea_mbimxsd_led_info);
 	imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
diff --git a/arch/arm/mach-imx/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c
index aaa592fdb9ce..96a24b73dc23 100644
--- a/arch/arm/mach-imx/eukrea_mbimxsd-baseboard.c
+++ b/arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c
@@ -28,6 +28,8 @@
 #include <linux/platform_device.h>
 #include <linux/input.h>
 #include <linux/i2c.h>
+#include <video/platform_lcd.h>
+#include <linux/backlight.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -40,7 +42,7 @@
 
 #include "devices-imx51.h"
 
-static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
+static iomux_v3_cfg_t eukrea_mbimxsd51_pads[] = {
 	/* LED */
 	MX51_PAD_NANDF_D10__GPIO3_30,
 	/* SWITCH */
@@ -66,12 +68,64 @@ static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
 	NEW_PAD_CTRL(MX51_PAD_GPIO1_0__SD1_CD, PAD_CTL_PUS_22K_UP |
 			PAD_CTL_PKE | PAD_CTL_SRE_FAST |
 			PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
+	/* SSI */
+	MX51_PAD_AUD3_BB_TXD__AUD3_TXD,
+	MX51_PAD_AUD3_BB_RXD__AUD3_RXD,
+	MX51_PAD_AUD3_BB_CK__AUD3_TXC,
+	MX51_PAD_AUD3_BB_FS__AUD3_TXFS,
+	/* LCD Backlight */
+	MX51_PAD_DI1_D1_CS__GPIO3_4,
+	/* LCD RST */
+	MX51_PAD_CSI1_D9__GPIO3_13,
 };
 
 #define GPIO_LED1	IMX_GPIO_NR(3, 30)
 #define GPIO_SWITCH1	IMX_GPIO_NR(3, 31)
+#define GPIO_LCDRST	IMX_GPIO_NR(3, 13)
+#define GPIO_LCDBL	IMX_GPIO_NR(3, 4)
 
-static const struct gpio_led eukrea_mbimxsd_leds[] __initconst = {
+static void eukrea_mbimxsd51_lcd_power_set(struct plat_lcd_data *pd,
+				   unsigned int power)
+{
+	if (power)
+		gpio_direction_output(GPIO_LCDRST, 1);
+	else
+		gpio_direction_output(GPIO_LCDRST, 0);
+}
+
+static struct plat_lcd_data eukrea_mbimxsd51_lcd_power_data = {
+	.set_power		= eukrea_mbimxsd51_lcd_power_set,
+};
+
+static struct platform_device eukrea_mbimxsd51_lcd_powerdev = {
+	.name			= "platform-lcd",
+	.dev.platform_data	= &eukrea_mbimxsd51_lcd_power_data,
+};
+
+static void eukrea_mbimxsd51_bl_set_intensity(int intensity)
+{
+	if (intensity)
+		gpio_direction_output(GPIO_LCDBL, 1);
+	else
+		gpio_direction_output(GPIO_LCDBL, 0);
+}
+
+static struct generic_bl_info eukrea_mbimxsd51_bl_info = {
+	.name			= "eukrea_mbimxsd51-bl",
+	.max_intensity		= 0xff,
+	.default_intensity	= 0xff,
+	.set_bl_intensity	= eukrea_mbimxsd51_bl_set_intensity,
+};
+
+static struct platform_device eukrea_mbimxsd51_bl_dev = {
+	.name			= "generic-bl",
+	.id			= 1,
+	.dev = {
+		.platform_data	= &eukrea_mbimxsd51_bl_info,
+	},
+};
+
+static const struct gpio_led eukrea_mbimxsd51_leds[] __initconst = {
 	{
 		.name			= "led1",
 		.default_trigger	= "heartbeat",
@@ -81,12 +135,12 @@ static const struct gpio_led eukrea_mbimxsd_leds[] __initconst = {
 };
 
 static const struct gpio_led_platform_data
-		eukrea_mbimxsd_led_info __initconst = {
-	.leds		= eukrea_mbimxsd_leds,
-	.num_leds	= ARRAY_SIZE(eukrea_mbimxsd_leds),
+		eukrea_mbimxsd51_led_info __initconst = {
+	.leds		= eukrea_mbimxsd51_leds,
+	.num_leds	= ARRAY_SIZE(eukrea_mbimxsd51_leds),
 };
 
-static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
+static struct gpio_keys_button eukrea_mbimxsd51_gpio_buttons[] = {
 	{
 		.gpio		= GPIO_SWITCH1,
 		.code		= BTN_0,
@@ -97,21 +151,39 @@ static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
 };
 
 static const struct gpio_keys_platform_data
-		eukrea_mbimxsd_button_data __initconst = {
-	.buttons	= eukrea_mbimxsd_gpio_buttons,
-	.nbuttons	= ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons),
+		eukrea_mbimxsd51_button_data __initconst = {
+	.buttons	= eukrea_mbimxsd51_gpio_buttons,
+	.nbuttons	= ARRAY_SIZE(eukrea_mbimxsd51_gpio_buttons),
 };
 
 static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-static struct i2c_board_info eukrea_mbimxsd_i2c_devices[] = {
+static struct i2c_board_info eukrea_mbimxsd51_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("tlv320aic23", 0x1a),
 	},
 };
 
+static const
+struct imx_ssi_platform_data eukrea_mbimxsd51_ssi_pdata __initconst = {
+	.flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE,
+};
+
+static int screen_type;
+
+static int __init eukrea_mbimxsd51_screen_type(char *options)
+{
+	if (!strcmp(options, "dvi"))
+		screen_type = 1;
+	else if (!strcmp(options, "tft"))
+		screen_type = 0;
+
+	return 0;
+}
+__setup("screen_type=", eukrea_mbimxsd51_screen_type);
+
 /*
  * system init for baseboard usage. Will be called by cpuimx51sd init.
  *
@@ -120,8 +192,8 @@ static struct i2c_board_info eukrea_mbimxsd_i2c_devices[] = {
  */
 void __init eukrea_mbimxsd51_baseboard_init(void)
 {
-	if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads,
-			ARRAY_SIZE(eukrea_mbimxsd_pads)))
+	if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd51_pads,
+			ARRAY_SIZE(eukrea_mbimxsd51_pads)))
 		printk(KERN_ERR "error setting mbimxsd pads !\n");
 
 	imx51_add_imx_uart(1, NULL);
@@ -129,6 +201,8 @@ void __init eukrea_mbimxsd51_baseboard_init(void)
 
 	imx51_add_sdhci_esdhc_imx(0, NULL);
 
+	imx51_add_imx_ssi(0, &eukrea_mbimxsd51_ssi_pdata);
+
 	gpio_request(GPIO_LED1, "LED1");
 	gpio_direction_output(GPIO_LED1, 1);
 	gpio_free(GPIO_LED1);
@@ -137,9 +211,21 @@ void __init eukrea_mbimxsd51_baseboard_init(void)
 	gpio_direction_input(GPIO_SWITCH1);
 	gpio_free(GPIO_SWITCH1);
 
-	i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices,
-				ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
-
-	gpio_led_register_device(-1, &eukrea_mbimxsd_led_info);
-	imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
+	gpio_request(GPIO_LCDRST, "LCDRST");
+	gpio_direction_output(GPIO_LCDRST, 0);
+	gpio_request(GPIO_LCDBL, "LCDBL");
+	gpio_direction_output(GPIO_LCDBL, 0);
+	if (!screen_type) {
+		platform_device_register(&eukrea_mbimxsd51_bl_dev);
+		platform_device_register(&eukrea_mbimxsd51_lcd_powerdev);
+	} else {
+		gpio_free(GPIO_LCDRST);
+		gpio_free(GPIO_LCDBL);
+	}
+
+	i2c_register_board_info(0, eukrea_mbimxsd51_i2c_devices,
+				ARRAY_SIZE(eukrea_mbimxsd51_i2c_devices));
+
+	gpio_led_register_device(-1, &eukrea_mbimxsd51_led_info);
+	imx_add_gpio_keys(&eukrea_mbimxsd51_button_data);
 }
diff --git a/arch/arm/mach-imx/imx27-dt.c b/arch/arm/mach-imx/imx27-dt.c
index 861ceb8232d6..ed38d03c61f2 100644
--- a/arch/arm/mach-imx/imx27-dt.c
+++ b/arch/arm/mach-imx/imx27-dt.c
@@ -35,7 +35,7 @@ static const struct of_dev_auxdata imx27_auxdata_lookup[] __initconst = {
 static int __init imx27_avic_add_irq_domain(struct device_node *np,
 				struct device_node *interrupt_parent)
 {
-	irq_domain_add_simple(np, 0);
+	irq_domain_add_legacy(np, 64, 0, 0, &irq_domain_simple_ops, NULL);
 	return 0;
 }
 
@@ -44,7 +44,9 @@ static int __init imx27_gpio_add_irq_domain(struct device_node *np,
 {
 	static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS;
 
-	irq_domain_add_simple(np, gpio_irq_base);
+	gpio_irq_base -= 32;
+	irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops,
+				NULL);
 
 	return 0;
 }
diff --git a/arch/arm/mach-imx/imx51-dt.c b/arch/arm/mach-imx/imx51-dt.c
index 5cca573964f0..18e78dba4298 100644
--- a/arch/arm/mach-imx/imx51-dt.c
+++ b/arch/arm/mach-imx/imx51-dt.c
@@ -14,6 +14,7 @@
 #include <linux/irqdomain.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
+#include <linux/pinctrl/machine.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <mach/common.h>
@@ -81,6 +82,8 @@ static void __init imx51_dt_init(void)
 
 	of_irq_init(imx51_irq_match);
 
+	pinctrl_provide_dummies();
+
 	node = of_find_matching_node(NULL, imx51_iomuxc_of_match);
 	if (node) {
 		of_id = of_match_node(imx51_iomuxc_of_match, node);
@@ -115,6 +118,7 @@ DT_MACHINE_START(IMX51_DT, "Freescale i.MX51 (Device Tree Support)")
 	.handle_irq	= imx51_handle_irq,
 	.timer		= &imx51_timer,
 	.init_machine	= imx51_dt_init,
+	.init_late	= imx51_init_late,
 	.dt_compat	= imx51_dt_board_compat,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/imx53-dt.c b/arch/arm/mach-imx/imx53-dt.c
index 4172279b3900..eb04b6248e48 100644
--- a/arch/arm/mach-imx/imx53-dt.c
+++ b/arch/arm/mach-imx/imx53-dt.c
@@ -10,11 +10,15 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/irqdomain.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
+#include <linux/pinctrl/machine.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <mach/common.h>
@@ -80,6 +84,19 @@ static const struct of_device_id imx53_iomuxc_of_match[] __initconst = {
 	{ /* sentinel */ }
 };
 
+static void __init imx53_qsb_init(void)
+{
+	struct clk *clk;
+
+	clk = clk_get_sys(NULL, "ssi_ext1");
+	if (IS_ERR(clk)) {
+		pr_err("failed to get clk ssi_ext1\n");
+		return;
+	}
+
+	clk_register_clkdev(clk, NULL, "0-000a");
+}
+
 static void __init imx53_dt_init(void)
 {
 	struct device_node *node;
@@ -88,6 +105,8 @@ static void __init imx53_dt_init(void)
 
 	of_irq_init(imx53_irq_match);
 
+	pinctrl_provide_dummies();
+
 	node = of_find_matching_node(NULL, imx53_iomuxc_of_match);
 	if (node) {
 		of_id = of_match_node(imx53_iomuxc_of_match, node);
@@ -96,6 +115,9 @@ static void __init imx53_dt_init(void)
 		of_node_put(node);
 	}
 
+	if (of_machine_is_compatible("fsl,imx53-qsb"))
+		imx53_qsb_init();
+
 	of_platform_populate(NULL, of_default_bus_match_table,
 			     imx53_auxdata_lookup, NULL);
 }
diff --git a/arch/arm/mach-imx/lluart.c b/arch/arm/mach-imx/lluart.c
index 0213f8dcee81..c40a34c00489 100644
--- a/arch/arm/mach-imx/lluart.c
+++ b/arch/arm/mach-imx/lluart.c
@@ -17,6 +17,12 @@
 #include <mach/hardware.h>
 
 static struct map_desc imx_lluart_desc = {
+#ifdef CONFIG_DEBUG_IMX6Q_UART2
+	.virtual	= MX6Q_IO_P2V(MX6Q_UART2_BASE_ADDR),
+	.pfn		= __phys_to_pfn(MX6Q_UART2_BASE_ADDR),
+	.length		= MX6Q_UART2_SIZE,
+	.type		= MT_DEVICE,
+#endif
 #ifdef CONFIG_DEBUG_IMX6Q_UART4
 	.virtual	= MX6Q_IO_P2V(MX6Q_UART4_BASE_ADDR),
 	.pfn		= __phys_to_pfn(MX6Q_UART4_BASE_ADDR),
diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c
index 27bc27e6ea41..c650145d1646 100644
--- a/arch/arm/mach-imx/mach-armadillo5x0.c
+++ b/arch/arm/mach-imx/mach-armadillo5x0.c
@@ -38,6 +38,8 @@
 #include <linux/usb/otg.h>
 #include <linux/usb/ulpi.h>
 #include <linux/delay.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -479,6 +481,11 @@ static struct platform_device *devices[] __initdata = {
 	&armadillo5x0_smc911x_device,
 };
 
+static struct regulator_consumer_supply dummy_supplies[] = {
+	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+	REGULATOR_SUPPLY("vddvario", "smsc911x"),
+};
+
 /*
  * Perform board specific initializations
  */
@@ -489,6 +496,8 @@ static void __init armadillo5x0_init(void)
 	mxc_iomux_setup_multiple_pins(armadillo5x0_pins,
 			ARRAY_SIZE(armadillo5x0_pins), "armadillo5x0");
 
+	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 	imx_add_gpio_keys(&armadillo5x0_button_data);
 	imx31_add_imx_i2c1(NULL);
diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c
index 8ecc872b2547..c515f8ede1a1 100644
--- a/arch/arm/mach-imx/mach-cpuimx35.c
+++ b/arch/arm/mach-imx/mach-cpuimx35.c
@@ -194,7 +194,7 @@ static void __init eukrea_cpuimx35_timer_init(void)
 	mx35_clocks_init();
 }
 
-struct sys_timer eukrea_cpuimx35_timer = {
+static struct sys_timer eukrea_cpuimx35_timer = {
 	.init	= eukrea_cpuimx35_timer_init,
 };
 
diff --git a/arch/arm/mach-imx/mach-cpuimx51.c b/arch/arm/mach-imx/mach-cpuimx51.c
deleted file mode 100644
index 944025da8333..000000000000
--- a/arch/arm/mach-imx/mach-cpuimx51.c
+++ /dev/null
@@ -1,301 +0,0 @@
-/*
- *
- * Copyright (C) 2010 Eric Bénard <eric@eukrea.com>
- *
- * based on board-mx51_babbage.c which is
- * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/interrupt.h>
-
-#include <mach/eukrea-baseboards.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx51.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "devices-imx51.h"
-
-#define CPUIMX51_USBH1_STP	IMX_GPIO_NR(1, 27)
-#define CPUIMX51_QUARTA_GPIO	IMX_GPIO_NR(3, 28)
-#define CPUIMX51_QUARTB_GPIO	IMX_GPIO_NR(3, 25)
-#define CPUIMX51_QUARTC_GPIO	IMX_GPIO_NR(3, 26)
-#define CPUIMX51_QUARTD_GPIO	IMX_GPIO_NR(3, 27)
-#define CPUIMX51_QUART_XTAL	14745600
-#define CPUIMX51_QUART_REGSHIFT	17
-
-/* USB_CTRL_1 */
-#define MX51_USB_CTRL_1_OFFSET		0x10
-#define MX51_USB_CTRL_UH1_EXT_CLK_EN	(1 << 25)
-
-#define	MX51_USB_PLLDIV_12_MHZ		0x00
-#define	MX51_USB_PLL_DIV_19_2_MHZ	0x01
-#define	MX51_USB_PLL_DIV_24_MHZ		0x02
-
-static struct plat_serial8250_port serial_platform_data[] = {
-	{
-		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x400000),
-		.irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTA_GPIO),
-		.irqflags = IRQF_TRIGGER_HIGH,
-		.uartclk = CPUIMX51_QUART_XTAL,
-		.regshift = CPUIMX51_QUART_REGSHIFT,
-		.iotype = UPIO_MEM,
-		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
-	}, {
-		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x800000),
-		.irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTB_GPIO),
-		.irqflags = IRQF_TRIGGER_HIGH,
-		.uartclk = CPUIMX51_QUART_XTAL,
-		.regshift = CPUIMX51_QUART_REGSHIFT,
-		.iotype = UPIO_MEM,
-		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
-	}, {
-		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x1000000),
-		.irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTC_GPIO),
-		.irqflags = IRQF_TRIGGER_HIGH,
-		.uartclk = CPUIMX51_QUART_XTAL,
-		.regshift = CPUIMX51_QUART_REGSHIFT,
-		.iotype = UPIO_MEM,
-		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
-	}, {
-		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x2000000),
-		.irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTD_GPIO),
-		.irqflags = IRQF_TRIGGER_HIGH,
-		.uartclk = CPUIMX51_QUART_XTAL,
-		.regshift = CPUIMX51_QUART_REGSHIFT,
-		.iotype = UPIO_MEM,
-		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
-	}, {
-	}
-};
-
-static struct platform_device serial_device = {
-	.name = "serial8250",
-	.id = 0,
-	.dev = {
-		.platform_data = serial_platform_data,
-	},
-};
-
-static struct platform_device *devices[] __initdata = {
-	&serial_device,
-};
-
-static iomux_v3_cfg_t eukrea_cpuimx51_pads[] = {
-	/* UART1 */
-	MX51_PAD_UART1_RXD__UART1_RXD,
-	MX51_PAD_UART1_TXD__UART1_TXD,
-	MX51_PAD_UART1_RTS__UART1_RTS,
-	MX51_PAD_UART1_CTS__UART1_CTS,
-
-	/* I2C2 */
-	MX51_PAD_GPIO1_2__I2C2_SCL,
-	MX51_PAD_GPIO1_3__I2C2_SDA,
-	MX51_PAD_NANDF_D10__GPIO3_30,
-
-	/* QUART IRQ */
-	MX51_PAD_NANDF_D15__GPIO3_25,
-	MX51_PAD_NANDF_D14__GPIO3_26,
-	MX51_PAD_NANDF_D13__GPIO3_27,
-	MX51_PAD_NANDF_D12__GPIO3_28,
-
-	/* USB HOST1 */
-	MX51_PAD_USBH1_CLK__USBH1_CLK,
-	MX51_PAD_USBH1_DIR__USBH1_DIR,
-	MX51_PAD_USBH1_NXT__USBH1_NXT,
-	MX51_PAD_USBH1_DATA0__USBH1_DATA0,
-	MX51_PAD_USBH1_DATA1__USBH1_DATA1,
-	MX51_PAD_USBH1_DATA2__USBH1_DATA2,
-	MX51_PAD_USBH1_DATA3__USBH1_DATA3,
-	MX51_PAD_USBH1_DATA4__USBH1_DATA4,
-	MX51_PAD_USBH1_DATA5__USBH1_DATA5,
-	MX51_PAD_USBH1_DATA6__USBH1_DATA6,
-	MX51_PAD_USBH1_DATA7__USBH1_DATA7,
-	MX51_PAD_USBH1_STP__USBH1_STP,
-};
-
-static const struct mxc_nand_platform_data
-		eukrea_cpuimx51_nand_board_info __initconst = {
-	.width		= 1,
-	.hw_ecc		= 1,
-	.flash_bbt	= 1,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const
-struct imxi2c_platform_data eukrea_cpuimx51_i2c_data __initconst = {
-	.bitrate = 100000,
-};
-
-static struct i2c_board_info eukrea_cpuimx51_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("pcf8563", 0x51),
-	},
-};
-
-/* This function is board specific as the bit mask for the plldiv will also
-be different for other Freescale SoCs, thus a common bitmask is not
-possible and cannot get place in /plat-mxc/ehci.c.*/
-static int initialize_otg_port(struct platform_device *pdev)
-{
-	u32 v;
-	void __iomem *usb_base;
-	void __iomem *usbother_base;
-
-	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
-	if (!usb_base)
-		return -ENOMEM;
-	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
-
-	/* Set the PHY clock to 19.2MHz */
-	v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
-	v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK;
-	v |= MX51_USB_PLL_DIV_19_2_MHZ;
-	__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
-	iounmap(usb_base);
-
-	mdelay(10);
-
-	return mx51_initialize_usb_hw(0, MXC_EHCI_INTERNAL_PHY);
-}
-
-static int initialize_usbh1_port(struct platform_device *pdev)
-{
-	u32 v;
-	void __iomem *usb_base;
-	void __iomem *usbother_base;
-
-	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
-	if (!usb_base)
-		return -ENOMEM;
-	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
-
-	/* The clock for the USBH1 ULPI port will come externally from the PHY. */
-	v = __raw_readl(usbother_base + MX51_USB_CTRL_1_OFFSET);
-	__raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN, usbother_base + MX51_USB_CTRL_1_OFFSET);
-	iounmap(usb_base);
-
-	mdelay(10);
-
-	return mx51_initialize_usb_hw(1, MXC_EHCI_POWER_PINS_ENABLED |
-			MXC_EHCI_ITC_NO_THRESHOLD);
-}
-
-static const struct mxc_usbh_platform_data dr_utmi_config __initconst = {
-	.init		= initialize_otg_port,
-	.portsc	= MXC_EHCI_UTMI_16BIT,
-};
-
-static const struct fsl_usb2_platform_data usb_pdata __initconst = {
-	.operating_mode	= FSL_USB2_DR_DEVICE,
-	.phy_mode	= FSL_USB2_PHY_UTMI_WIDE,
-};
-
-static const struct mxc_usbh_platform_data usbh1_config __initconst = {
-	.init		= initialize_usbh1_port,
-	.portsc	= MXC_EHCI_MODE_ULPI,
-};
-
-static int otg_mode_host;
-
-static int __init eukrea_cpuimx51_otg_mode(char *options)
-{
-	if (!strcmp(options, "host"))
-		otg_mode_host = 1;
-	else if (!strcmp(options, "device"))
-		otg_mode_host = 0;
-	else
-		pr_info("otg_mode neither \"host\" nor \"device\". "
-			"Defaulting to device\n");
-	return 0;
-}
-__setup("otg_mode=", eukrea_cpuimx51_otg_mode);
-
-/*
- * Board specific initialization.
- */
-static void __init eukrea_cpuimx51_init(void)
-{
-	imx51_soc_init();
-
-	mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51_pads,
-					ARRAY_SIZE(eukrea_cpuimx51_pads));
-
-	imx51_add_imx_uart(0, &uart_pdata);
-	imx51_add_mxc_nand(&eukrea_cpuimx51_nand_board_info);
-
-	gpio_request(CPUIMX51_QUARTA_GPIO, "quarta_irq");
-	gpio_direction_input(CPUIMX51_QUARTA_GPIO);
-	gpio_free(CPUIMX51_QUARTA_GPIO);
-	gpio_request(CPUIMX51_QUARTB_GPIO, "quartb_irq");
-	gpio_direction_input(CPUIMX51_QUARTB_GPIO);
-	gpio_free(CPUIMX51_QUARTB_GPIO);
-	gpio_request(CPUIMX51_QUARTC_GPIO, "quartc_irq");
-	gpio_direction_input(CPUIMX51_QUARTC_GPIO);
-	gpio_free(CPUIMX51_QUARTC_GPIO);
-	gpio_request(CPUIMX51_QUARTD_GPIO, "quartd_irq");
-	gpio_direction_input(CPUIMX51_QUARTD_GPIO);
-	gpio_free(CPUIMX51_QUARTD_GPIO);
-
-	imx51_add_fec(NULL);
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	imx51_add_imx_i2c(1, &eukrea_cpuimx51_i2c_data);
-	i2c_register_board_info(1, eukrea_cpuimx51_i2c_devices,
-				ARRAY_SIZE(eukrea_cpuimx51_i2c_devices));
-
-	if (otg_mode_host)
-		imx51_add_mxc_ehci_otg(&dr_utmi_config);
-	else {
-		initialize_otg_port(NULL);
-		imx51_add_fsl_usb2_udc(&usb_pdata);
-	}
-	imx51_add_mxc_ehci_hs(1, &usbh1_config);
-
-#ifdef CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD
-	eukrea_mbimx51_baseboard_init();
-#endif
-}
-
-static void __init eukrea_cpuimx51_timer_init(void)
-{
-	mx51_clocks_init(32768, 24000000, 22579200, 0);
-}
-
-static struct sys_timer mxc_timer = {
-	.init	= eukrea_cpuimx51_timer_init,
-};
-
-MACHINE_START(EUKREA_CPUIMX51, "Eukrea CPUIMX51 Module")
-	/* Maintainer: Eric Bénard <eric@eukrea.com> */
-	.atag_offset = 0x100,
-	.map_io = mx51_map_io,
-	.init_early = imx51_init_early,
-	.init_irq = mx51_init_irq,
-	.handle_irq = imx51_handle_irq,
-	.timer = &mxc_timer,
-	.init_machine = eukrea_cpuimx51_init,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-cpuimx51sd.c b/arch/arm/mach-imx/mach-cpuimx51sd.c
index 9fbe923c8b08..ac50f1671e38 100644
--- a/arch/arm/mach-imx/mach-cpuimx51sd.c
+++ b/arch/arm/mach-imx/mach-cpuimx51sd.c
@@ -41,11 +41,13 @@
 
 #define USBH1_RST		IMX_GPIO_NR(2, 28)
 #define ETH_RST			IMX_GPIO_NR(2, 31)
-#define TSC2007_IRQGPIO		IMX_GPIO_NR(3, 12)
+#define TSC2007_IRQGPIO_REV2	IMX_GPIO_NR(3, 12)
+#define TSC2007_IRQGPIO_REV3	IMX_GPIO_NR(4, 0)
 #define CAN_IRQGPIO		IMX_GPIO_NR(1, 1)
 #define CAN_RST			IMX_GPIO_NR(4, 15)
 #define CAN_NCS			IMX_GPIO_NR(4, 24)
-#define CAN_RXOBF		IMX_GPIO_NR(1, 4)
+#define CAN_RXOBF_REV2		IMX_GPIO_NR(1, 4)
+#define CAN_RXOBF_REV3		IMX_GPIO_NR(3, 12)
 #define CAN_RX1BF		IMX_GPIO_NR(1, 6)
 #define CAN_TXORTS		IMX_GPIO_NR(1, 7)
 #define CAN_TX1RTS		IMX_GPIO_NR(1, 8)
@@ -90,6 +92,10 @@ static iomux_v3_cfg_t eukrea_cpuimx51sd_pads[] = {
 	MX51_PAD_I2C1_CLK__GPIO4_16,
 	MX51_PAD_I2C1_DAT__GPIO4_17,
 
+	/* I2C1 */
+	MX51_PAD_SD2_CMD__I2C1_SCL,
+	MX51_PAD_SD2_CLK__I2C1_SDA,
+
 	/* CAN */
 	MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI,
 	MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
@@ -108,15 +114,27 @@ static iomux_v3_cfg_t eukrea_cpuimx51sd_pads[] = {
 	NEW_PAD_CTRL(MX51_PAD_GPIO_NAND__GPIO_NAND, PAD_CTL_PUS_22K_UP |
 			PAD_CTL_PKE | PAD_CTL_SRE_FAST |
 			PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
+	NEW_PAD_CTRL(MX51_PAD_NANDF_D8__GPIO4_0, PAD_CTL_PUS_22K_UP |
+			PAD_CTL_PKE | PAD_CTL_SRE_FAST |
+			PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
 };
 
 static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
+static int tsc2007_get_pendown_state(void)
+{
+	if (mx51_revision() < IMX_CHIP_REVISION_3_0)
+		return !gpio_get_value(TSC2007_IRQGPIO_REV2);
+	else
+		return !gpio_get_value(TSC2007_IRQGPIO_REV3);
+}
+
 static struct tsc2007_platform_data tsc2007_info = {
 	.model			= 2007,
 	.x_plate_ohms		= 180,
+	.get_pendown_state	= tsc2007_get_pendown_state,
 };
 
 static struct i2c_board_info eukrea_cpuimx51sd_i2c_devices[] = {
@@ -126,7 +144,6 @@ static struct i2c_board_info eukrea_cpuimx51sd_i2c_devices[] = {
 		I2C_BOARD_INFO("tsc2007", 0x49),
 		.type		= "tsc2007",
 		.platform_data	= &tsc2007_info,
-		.irq		= IMX_GPIO_TO_IRQ(TSC2007_IRQGPIO),
 	},
 };
 
@@ -255,10 +272,14 @@ static const struct spi_imx_master cpuimx51sd_ecspi1_pdata __initconst = {
 	.num_chipselect	= ARRAY_SIZE(cpuimx51sd_spi1_cs),
 };
 
-static struct platform_device *platform_devices[] __initdata = {
+static struct platform_device *rev2_platform_devices[] __initdata = {
 	&hsi2c_gpio_device,
 };
 
+static const struct imxi2c_platform_data cpuimx51sd_i2c_data __initconst = {
+	.bitrate = 100000,
+};
+
 static void __init eukrea_cpuimx51sd_init(void)
 {
 	imx51_soc_init();
@@ -272,6 +293,7 @@ static void __init eukrea_cpuimx51sd_init(void)
 
 	imx51_add_imx_uart(0, &uart_pdata);
 	imx51_add_mxc_nand(&eukrea_cpuimx51sd_nand_board_info);
+	imx51_add_imx2_wdt(0, NULL);
 
 	gpio_request(ETH_RST, "eth_rst");
 	gpio_set_value(ETH_RST, 1);
@@ -291,13 +313,25 @@ static void __init eukrea_cpuimx51sd_init(void)
 	spi_register_board_info(cpuimx51sd_spi_device,
 				ARRAY_SIZE(cpuimx51sd_spi_device));
 
-	gpio_request(TSC2007_IRQGPIO, "tsc2007_irq");
-	gpio_direction_input(TSC2007_IRQGPIO);
-	gpio_free(TSC2007_IRQGPIO);
+	if (mx51_revision() < IMX_CHIP_REVISION_3_0) {
+		eukrea_cpuimx51sd_i2c_devices[1].irq =
+			gpio_to_irq(TSC2007_IRQGPIO_REV2),
+		platform_add_devices(rev2_platform_devices,
+			ARRAY_SIZE(rev2_platform_devices));
+		gpio_request(TSC2007_IRQGPIO_REV2, "tsc2007_irq");
+		gpio_direction_input(TSC2007_IRQGPIO_REV2);
+		gpio_free(TSC2007_IRQGPIO_REV2);
+	} else {
+		eukrea_cpuimx51sd_i2c_devices[1].irq =
+			gpio_to_irq(TSC2007_IRQGPIO_REV3),
+		imx51_add_imx_i2c(0, &cpuimx51sd_i2c_data);
+		gpio_request(TSC2007_IRQGPIO_REV3, "tsc2007_irq");
+		gpio_direction_input(TSC2007_IRQGPIO_REV3);
+		gpio_free(TSC2007_IRQGPIO_REV3);
+	}
 
 	i2c_register_board_info(0, eukrea_cpuimx51sd_i2c_devices,
 			ARRAY_SIZE(eukrea_cpuimx51sd_i2c_devices));
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 
 	if (otg_mode_host)
 		imx51_add_mxc_ehci_otg(&dr_utmi_config);
@@ -335,5 +369,6 @@ MACHINE_START(EUKREA_CPUIMX51SD, "Eukrea CPUIMX51SD")
 	.handle_irq = imx51_handle_irq,
 	.timer = &mxc_timer,
 	.init_machine = eukrea_cpuimx51sd_init,
+	.init_late	= imx51_init_late,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
index 76a97a598b9e..d1e04e676e33 100644
--- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
+++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
@@ -106,6 +106,7 @@ static const struct mxc_usbh_platform_data usbh2_pdata __initconst = {
 static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
 	.operating_mode = FSL_USB2_DR_DEVICE,
 	.phy_mode       = FSL_USB2_PHY_UTMI,
+	.workaround     = FLS_USB2_WORKAROUND_ENGCM09152,
 };
 
 static int otg_mode_host;
@@ -135,6 +136,7 @@ static void __init eukrea_cpuimx25_init(void)
 	imx25_add_mxc_nand(&eukrea_cpuimx25_nand_board_info);
 	imx25_add_imxdi_rtc(NULL);
 	imx25_add_fec(&mx25_fec_pdata);
+	imx25_add_imx2_wdt(NULL);
 
 	i2c_register_board_info(0, eukrea_cpuimx25_i2c_devices,
 				ARRAY_SIZE(eukrea_cpuimx25_i2c_devices));
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index f7b074f496f0..dff82eb57cd9 100644
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -38,6 +38,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
+#include <asm/system.h>
 #include <mach/common.h>
 #include <mach/iomux-mx27.h>
 
@@ -48,6 +49,14 @@
 #define OTG_PHY_CS_GPIO (GPIO_PORTF + 17)
 #define SDHC1_IRQ IRQ_GPIOB(25)
 
+#define MOTHERBOARD_BIT2	(GPIO_PORTD + 31)
+#define MOTHERBOARD_BIT1	(GPIO_PORTD + 30)
+#define MOTHERBOARD_BIT0	(GPIO_PORTD + 29)
+
+#define EXPBOARD_BIT2		(GPIO_PORTD + 25)
+#define EXPBOARD_BIT1		(GPIO_PORTD + 27)
+#define EXPBOARD_BIT0		(GPIO_PORTD + 28)
+
 static const int visstrim_m10_pins[] __initconst = {
 	/* UART1 (console) */
 	PE12_PF_UART1_TXD,
@@ -119,6 +128,23 @@ static const int visstrim_m10_pins[] __initconst = {
 	PB19_PF_CSI_D7,
 	PB20_PF_CSI_VSYNC,
 	PB21_PF_CSI_HSYNC,
+	/* mother board version */
+	MOTHERBOARD_BIT2 | GPIO_GPIO | GPIO_IN | GPIO_PUEN,
+	MOTHERBOARD_BIT1 | GPIO_GPIO | GPIO_IN | GPIO_PUEN,
+	MOTHERBOARD_BIT0 | GPIO_GPIO | GPIO_IN | GPIO_PUEN,
+	/* expansion board version */
+	EXPBOARD_BIT2 | GPIO_GPIO | GPIO_IN | GPIO_PUEN,
+	EXPBOARD_BIT1 | GPIO_GPIO | GPIO_IN | GPIO_PUEN,
+	EXPBOARD_BIT0 | GPIO_GPIO | GPIO_IN | GPIO_PUEN,
+};
+
+static struct gpio visstrim_m10_version_gpios[] = {
+	{ EXPBOARD_BIT0, GPIOF_IN, "exp-version-0" },
+	{ EXPBOARD_BIT1, GPIOF_IN, "exp-version-1" },
+	{ EXPBOARD_BIT2, GPIOF_IN, "exp-version-2" },
+	{ MOTHERBOARD_BIT0, GPIOF_IN, "mother-version-0" },
+	{ MOTHERBOARD_BIT1, GPIOF_IN, "mother-version-1" },
+	{ MOTHERBOARD_BIT2, GPIOF_IN, "mother-version-2" },
 };
 
 /* Camera */
@@ -152,7 +178,7 @@ static struct soc_camera_link iclink_tvp5150 = {
 
 static struct mx2_camera_platform_data visstrim_camera = {
 	.flags = MX2_CAMERA_CCIR | MX2_CAMERA_CCIR_INTERLACE |
-			MX2_CAMERA_SWAP16 | MX2_CAMERA_PCLK_SAMPLE_RISING,
+		 MX2_CAMERA_PCLK_SAMPLE_RISING,
 	.clk = 100000,
 };
 
@@ -369,11 +395,40 @@ static const struct imx_ssi_platform_data visstrim_m10_ssi_pdata __initconst = {
 	.flags			= IMX_SSI_DMA | IMX_SSI_SYN,
 };
 
+static void __init visstrim_m10_revision(void)
+{
+	int exp_version = 0;
+	int mo_version = 0;
+	int ret;
+
+	ret = gpio_request_array(visstrim_m10_version_gpios,
+				 ARRAY_SIZE(visstrim_m10_version_gpios));
+	if (ret) {
+		pr_err("Failed to request version gpios");
+		return;
+	}
+
+	/* Get expansion board version (negative logic) */
+	exp_version |= !gpio_get_value(EXPBOARD_BIT2) << 2;
+	exp_version |= !gpio_get_value(EXPBOARD_BIT1) << 1;
+	exp_version |= !gpio_get_value(EXPBOARD_BIT0);
+
+	/* Get mother board version (negative logic) */
+	mo_version |= !gpio_get_value(MOTHERBOARD_BIT2) << 2;
+	mo_version |= !gpio_get_value(MOTHERBOARD_BIT1) << 1;
+	mo_version |= !gpio_get_value(MOTHERBOARD_BIT0);
+
+	system_rev = 0x27000;
+	system_rev |= (mo_version << 4);
+	system_rev |= exp_version;
+}
+
 static void __init visstrim_m10_board_init(void)
 {
 	int ret;
 
 	imx27_soc_init();
+	visstrim_m10_revision();
 
 	ret = mxc_gpio_setup_multiple_pins(visstrim_m10_pins,
 			ARRAY_SIZE(visstrim_m10_pins), "VISSTRIM_M10");
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index da6c1d9af768..b47e98b7d539 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -10,6 +10,8 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
+#include <linux/clk.h>
+#include <linux/clkdev.h>
 #include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/io.h>
@@ -19,6 +21,7 @@
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
+#include <linux/pinctrl/machine.h>
 #include <linux/phy.h>
 #include <linux/micrel_phy.h>
 #include <asm/smp_twd.h>
@@ -63,23 +66,63 @@ soft:
 /* For imx6q sabrelite board: set KSZ9021RN RGMII pad skew */
 static int ksz9021rn_phy_fixup(struct phy_device *phydev)
 {
-	/* min rx data delay */
-	phy_write(phydev, 0x0b, 0x8105);
-	phy_write(phydev, 0x0c, 0x0000);
+	if (IS_ENABLED(CONFIG_PHYLIB)) {
+		/* min rx data delay */
+		phy_write(phydev, 0x0b, 0x8105);
+		phy_write(phydev, 0x0c, 0x0000);
 
-	/* max rx/tx clock delay, min rx/tx control delay */
-	phy_write(phydev, 0x0b, 0x8104);
-	phy_write(phydev, 0x0c, 0xf0f0);
-	phy_write(phydev, 0x0b, 0x104);
+		/* max rx/tx clock delay, min rx/tx control delay */
+		phy_write(phydev, 0x0b, 0x8104);
+		phy_write(phydev, 0x0c, 0xf0f0);
+		phy_write(phydev, 0x0b, 0x104);
+	}
 
 	return 0;
 }
 
+static void __init imx6q_sabrelite_cko1_setup(void)
+{
+	struct clk *cko1_sel, *ahb, *cko1;
+	unsigned long rate;
+
+	cko1_sel = clk_get_sys(NULL, "cko1_sel");
+	ahb = clk_get_sys(NULL, "ahb");
+	cko1 = clk_get_sys(NULL, "cko1");
+	if (IS_ERR(cko1_sel) || IS_ERR(ahb) || IS_ERR(cko1)) {
+		pr_err("cko1 setup failed!\n");
+		goto put_clk;
+	}
+	clk_set_parent(cko1_sel, ahb);
+	rate = clk_round_rate(cko1, 16000000);
+	clk_set_rate(cko1, rate);
+	clk_register_clkdev(cko1, NULL, "0-000a");
+put_clk:
+	if (!IS_ERR(cko1_sel))
+		clk_put(cko1_sel);
+	if (!IS_ERR(ahb))
+		clk_put(ahb);
+	if (!IS_ERR(cko1))
+		clk_put(cko1);
+}
+
+static void __init imx6q_sabrelite_init(void)
+{
+	if (IS_ENABLED(CONFIG_PHYLIB))
+		phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
+				ksz9021rn_phy_fixup);
+	imx6q_sabrelite_cko1_setup();
+}
+
 static void __init imx6q_init_machine(void)
 {
+	/*
+	 * This should be removed when all imx6q boards have pinctrl
+	 * states for devices defined in device tree.
+	 */
+	pinctrl_provide_dummies();
+
 	if (of_machine_is_compatible("fsl,imx6q-sabrelite"))
-		phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
-					   ksz9021rn_phy_fixup);
+		imx6q_sabrelite_init();
 
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 
@@ -132,6 +175,7 @@ static struct sys_timer imx6q_timer = {
 static const char *imx6q_dt_compat[] __initdata = {
 	"fsl,imx6q-arm2",
 	"fsl,imx6q-sabrelite",
+	"fsl,imx6q-sabresd",
 	"fsl,imx6q",
 	NULL,
 };
diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c
index fc78e8071cd1..15a26e908260 100644
--- a/arch/arm/mach-imx/mach-kzm_arm11_01.c
+++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c
@@ -24,6 +24,8 @@
 #include <linux/serial_8250.h>
 #include <linux/smsc911x.h>
 #include <linux/types.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
 
 #include <asm/irq.h>
 #include <asm/mach-types.h>
@@ -166,6 +168,11 @@ static struct platform_device kzm_smsc9118_device = {
 			  },
 };
 
+static struct regulator_consumer_supply dummy_supplies[] = {
+	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+	REGULATOR_SUPPLY("vddvario", "smsc911x"),
+};
+
 static int __init kzm_init_smsc9118(void)
 {
 	/*
@@ -175,6 +182,8 @@ static int __init kzm_init_smsc9118(void)
 	gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2), "smsc9118-int");
 	gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2));
 
+	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
 	return platform_device_register(&kzm_smsc9118_device);
 }
 #else
diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c
index 97046088ff1a..7274e7928136 100644
--- a/arch/arm/mach-imx/mach-mx1ads.c
+++ b/arch/arm/mach-imx/mach-mx1ads.c
@@ -134,7 +134,7 @@ static void __init mx1ads_timer_init(void)
 	mx1_clocks_init(32000);
 }
 
-struct sys_timer mx1ads_timer = {
+static struct sys_timer mx1ads_timer = {
 	.init	= mx1ads_timer_init,
 };
 
diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c
index e432d4acee1f..d14bbe949a4f 100644
--- a/arch/arm/mach-imx/mach-mx21ads.c
+++ b/arch/arm/mach-imx/mach-mx21ads.c
@@ -304,8 +304,7 @@ static void __init mx21ads_board_init(void)
 	imx21_add_mxc_nand(&mx21ads_nand_board_info);
 
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-	platform_device_register_full(
-			(struct platform_device_info *)&mx21ads_cs8900_devinfo);
+	platform_device_register_full(&mx21ads_cs8900_devinfo);
 }
 
 static void __init mx21ads_timer_init(void)
diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c
index 4d1aab154400..4eafdf275ea2 100644
--- a/arch/arm/mach-imx/mach-mx31_3ds.c
+++ b/arch/arm/mach-imx/mach-mx31_3ds.c
@@ -156,6 +156,11 @@ static int mx31_3ds_pins[] = {
 	MX31_PIN_CSI_VSYNC__CSI_VSYNC,
 	MX31_PIN_CSI_D5__GPIO3_5, /* CMOS PWDN */
 	IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_GPIO), /* CMOS reset */
+	/* SSI */
+	MX31_PIN_STXD4__STXD4,
+	MX31_PIN_SRXD4__SRXD4,
+	MX31_PIN_SCK4__SCK4,
+	MX31_PIN_SFS4__SFS4,
 };
 
 /*
@@ -488,12 +493,23 @@ static struct mc13xxx_regulator_init_data mx31_3ds_regulators[] = {
 };
 
 /* MC13783 */
+static struct mc13xxx_codec_platform_data mx31_3ds_codec = {
+	.dac_ssi_port = MC13783_SSI1_PORT,
+	.adc_ssi_port = MC13783_SSI1_PORT,
+};
+
 static struct mc13xxx_platform_data mc13783_pdata = {
 	.regulators = {
 		.regulators = mx31_3ds_regulators,
 		.num_regulators = ARRAY_SIZE(mx31_3ds_regulators),
 	},
-	.flags  = MC13XXX_USE_TOUCHSCREEN | MC13XXX_USE_RTC,
+	.codec = &mx31_3ds_codec,
+	.flags  = MC13XXX_USE_TOUCHSCREEN | MC13XXX_USE_RTC | MC13XXX_USE_CODEC,
+
+};
+
+static struct imx_ssi_platform_data mx31_3ds_ssi_pdata = {
+	.flags = IMX_SSI_DMA | IMX_SSI_NET,
 };
 
 /* SPI */
@@ -741,6 +757,10 @@ static void __init mx31_3ds_init(void)
 	}
 
 	mx31_3ds_init_camera();
+
+	imx31_add_imx_ssi(0, &mx31_3ds_ssi_pdata);
+
+	imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0);
 }
 
 static void __init mx31_3ds_timer_init(void)
diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c
index 02401bbd6d53..83714b0cc290 100644
--- a/arch/arm/mach-imx/mach-mx31lilly.c
+++ b/arch/arm/mach-imx/mach-mx31lilly.c
@@ -34,6 +34,8 @@
 #include <linux/mfd/mc13783.h>
 #include <linux/usb/otg.h>
 #include <linux/usb/ulpi.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -242,6 +244,11 @@ static struct platform_device *devices[] __initdata = {
 static int mx31lilly_baseboard;
 core_param(mx31lilly_baseboard, mx31lilly_baseboard, int, 0444);
 
+static struct regulator_consumer_supply dummy_supplies[] = {
+	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+	REGULATOR_SUPPLY("vddvario", "smsc911x"),
+};
+
 static void __init mx31lilly_board_init(void)
 {
 	imx31_soc_init();
@@ -280,6 +287,8 @@ static void __init mx31lilly_board_init(void)
 	imx31_add_spi_imx1(&spi1_pdata);
 	spi_register_board_info(&mc13783_dev, 1);
 
+	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
 	/* USB */
diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c
index ef80751712e7..686c60587980 100644
--- a/arch/arm/mach-imx/mach-mx31lite.c
+++ b/arch/arm/mach-imx/mach-mx31lite.c
@@ -29,6 +29,8 @@
 #include <linux/usb/ulpi.h>
 #include <linux/mtd/physmap.h>
 #include <linux/delay.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -226,6 +228,11 @@ void __init mx31lite_map_io(void)
 static int mx31lite_baseboard;
 core_param(mx31lite_baseboard, mx31lite_baseboard, int, 0444);
 
+static struct regulator_consumer_supply dummy_supplies[] = {
+	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+	REGULATOR_SUPPLY("vddvario", "smsc911x"),
+};
+
 static void __init mx31lite_init(void)
 {
 	int ret;
@@ -259,6 +266,8 @@ static void __init mx31lite_init(void)
 	if (usbh2_pdata.otg)
 		imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
 
+	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
 	/* SMSC9117 IRQ pin */
 	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq");
 	if (ret)
@@ -274,7 +283,7 @@ static void __init mx31lite_timer_init(void)
 	mx31_clocks_init(26000000);
 }
 
-struct sys_timer mx31lite_timer = {
+static struct sys_timer mx31lite_timer = {
 	.init	= mx31lite_timer_init,
 };
 
diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c
index f17a15f28316..016791f038b0 100644
--- a/arch/arm/mach-imx/mach-mx31moboard.c
+++ b/arch/arm/mach-imx/mach-mx31moboard.c
@@ -47,6 +47,7 @@
 #include <mach/hardware.h>
 #include <mach/iomux-mx3.h>
 #include <mach/ulpi.h>
+#include <mach/ssi.h>
 
 #include "devices-imx31.h"
 
@@ -102,6 +103,9 @@ static unsigned int moboard_pins[] = {
 	MX31_PIN_CSPI3_MOSI__MOSI, MX31_PIN_CSPI3_MISO__MISO,
 	MX31_PIN_CSPI3_SCLK__SCLK, MX31_PIN_CSPI3_SPI_RDY__SPI_RDY,
 	MX31_PIN_CSPI2_SS1__CSPI3_SS1,
+	/* SSI */
+	MX31_PIN_STXD4__STXD4, MX31_PIN_SRXD4__SRXD4,
+	MX31_PIN_SCK4__SCK4, MX31_PIN_SFS4__SFS4,
 };
 
 static struct physmap_flash_data mx31moboard_flash_data = {
@@ -276,6 +280,11 @@ static struct mc13xxx_buttons_platform_data moboard_buttons = {
 	.b1on_key = KEY_POWER,
 };
 
+static struct mc13xxx_codec_platform_data moboard_codec = {
+	.dac_ssi_port = MC13783_SSI1_PORT,
+	.adc_ssi_port = MC13783_SSI1_PORT,
+};
+
 static struct mc13xxx_platform_data moboard_pmic = {
 	.regulators = {
 		.regulators = moboard_regulators,
@@ -283,7 +292,12 @@ static struct mc13xxx_platform_data moboard_pmic = {
 	},
 	.leds = &moboard_leds,
 	.buttons = &moboard_buttons,
-	.flags = MC13XXX_USE_RTC | MC13XXX_USE_ADC,
+	.codec = &moboard_codec,
+	.flags = MC13XXX_USE_RTC | MC13XXX_USE_ADC | MC13XXX_USE_CODEC,
+};
+
+static struct imx_ssi_platform_data moboard_ssi_pdata = {
+	.flags = IMX_SSI_DMA | IMX_SSI_NET,
 };
 
 static struct spi_board_info moboard_spi_board_info[] __initdata = {
@@ -554,6 +568,10 @@ static void __init mx31moboard_init(void)
 
 	moboard_usbh2_init();
 
+	imx31_add_imx_ssi(0, &moboard_ssi_pdata);
+
+	imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0);
+
 	pm_power_off = mx31moboard_poweroff;
 
 	switch (mx31moboard_baseboard) {
@@ -580,7 +598,7 @@ static void __init mx31moboard_timer_init(void)
 	mx31_clocks_init(26000000);
 }
 
-struct sys_timer mx31moboard_timer = {
+static struct sys_timer mx31moboard_timer = {
 	.init	= mx31moboard_timer_init,
 };
 
diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c
index e14291d89e4f..28aa19476de7 100644
--- a/arch/arm/mach-imx/mach-mx35_3ds.c
+++ b/arch/arm/mach-imx/mach-mx35_3ds.c
@@ -34,6 +34,8 @@
 #include <linux/usb/otg.h>
 
 #include <linux/mtd/physmap.h>
+#include <linux/mfd/mc13892.h>
+#include <linux/regulator/machine.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -96,8 +98,7 @@ static struct i2c_board_info __initdata i2c_devices_3ds[] = {
 
 static int lcd_power_gpio = -ENXIO;
 
-static int mc9s08dz60_gpiochip_match(struct gpio_chip *chip,
-						     void *data)
+static int mc9s08dz60_gpiochip_match(struct gpio_chip *chip, void *data)
 {
 	return !strcmp(chip->label, data);
 }
@@ -253,6 +254,8 @@ static iomux_v3_cfg_t mx35pdk_pads[] = {
 	MX35_PAD_CSI_MCLK__IPU_CSI_MCLK,
 	MX35_PAD_CSI_PIXCLK__IPU_CSI_PIXCLK,
 	MX35_PAD_CSI_VSYNC__IPU_CSI_VSYNC,
+	/*PMIC IRQ*/
+	MX35_PAD_GPIO2_0__GPIO2_0,
 };
 
 /*
@@ -317,6 +320,193 @@ static struct platform_device mx35_3ds_ov2640 = {
 	},
 };
 
+static struct regulator_consumer_supply sw1_consumers[] = {
+	{
+		.supply = "cpu_vcc",
+	}
+};
+
+static struct regulator_consumer_supply vcam_consumers[] = {
+	/* sgtl5000 */
+	REGULATOR_SUPPLY("VDDA", "0-000a"),
+};
+
+static struct regulator_consumer_supply vaudio_consumers[] = {
+	REGULATOR_SUPPLY("cmos_vio", "soc-camera-pdrv.0"),
+};
+
+static struct regulator_init_data sw1_init = {
+	.constraints = {
+		.name = "SW1",
+		.min_uV = 600000,
+		.max_uV = 1375000,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+		.valid_modes_mask = 0,
+		.always_on = 1,
+		.boot_on = 1,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(sw1_consumers),
+	.consumer_supplies = sw1_consumers,
+};
+
+static struct regulator_init_data sw2_init = {
+	.constraints = {
+		.name = "SW2",
+		.always_on = 1,
+		.boot_on = 1,
+	}
+};
+
+static struct regulator_init_data sw3_init = {
+	.constraints = {
+		.name = "SW3",
+		.always_on = 1,
+		.boot_on = 1,
+	}
+};
+
+static struct regulator_init_data sw4_init = {
+	.constraints = {
+		.name = "SW4",
+		.always_on = 1,
+		.boot_on = 1,
+	}
+};
+
+static struct regulator_init_data viohi_init = {
+	.constraints = {
+		.name = "VIOHI",
+		.boot_on = 1,
+	}
+};
+
+static struct regulator_init_data vusb_init = {
+	.constraints = {
+		.name = "VUSB",
+		.boot_on = 1,
+	}
+};
+
+static struct regulator_init_data vdig_init = {
+	.constraints = {
+		.name = "VDIG",
+		.boot_on = 1,
+	}
+};
+
+static struct regulator_init_data vpll_init = {
+	.constraints = {
+		.name = "VPLL",
+		.boot_on = 1,
+	}
+};
+
+static struct regulator_init_data vusb2_init = {
+	.constraints = {
+		.name = "VUSB2",
+		.boot_on = 1,
+	}
+};
+
+static struct regulator_init_data vvideo_init = {
+	.constraints = {
+		.name = "VVIDEO",
+		.boot_on = 1
+	}
+};
+
+static struct regulator_init_data vaudio_init = {
+	.constraints = {
+		.name = "VAUDIO",
+		.min_uV = 2300000,
+		.max_uV = 3000000,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+		.boot_on = 1
+	},
+	.num_consumer_supplies = ARRAY_SIZE(vaudio_consumers),
+	.consumer_supplies = vaudio_consumers,
+};
+
+static struct regulator_init_data vcam_init = {
+	.constraints = {
+		.name = "VCAM",
+		.min_uV = 2500000,
+		.max_uV = 3000000,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+					REGULATOR_CHANGE_MODE,
+		.valid_modes_mask = REGULATOR_MODE_FAST | REGULATOR_MODE_NORMAL,
+		.boot_on = 1
+	},
+	.num_consumer_supplies = ARRAY_SIZE(vcam_consumers),
+	.consumer_supplies = vcam_consumers,
+};
+
+static struct regulator_init_data vgen1_init = {
+	.constraints = {
+		.name = "VGEN1",
+	}
+};
+
+static struct regulator_init_data vgen2_init = {
+	.constraints = {
+		.name = "VGEN2",
+		.boot_on = 1,
+	}
+};
+
+static struct regulator_init_data vgen3_init = {
+	.constraints = {
+		.name = "VGEN3",
+	}
+};
+
+static struct mc13xxx_regulator_init_data mx35_3ds_regulators[] = {
+	{ .id = MC13892_SW1, .init_data = &sw1_init },
+	{ .id = MC13892_SW2, .init_data = &sw2_init },
+	{ .id = MC13892_SW3, .init_data = &sw3_init },
+	{ .id = MC13892_SW4, .init_data = &sw4_init },
+	{ .id = MC13892_VIOHI, .init_data = &viohi_init },
+	{ .id = MC13892_VPLL, .init_data = &vpll_init },
+	{ .id = MC13892_VDIG, .init_data = &vdig_init },
+	{ .id = MC13892_VUSB2, .init_data = &vusb2_init },
+	{ .id = MC13892_VVIDEO, .init_data = &vvideo_init },
+	{ .id = MC13892_VAUDIO, .init_data = &vaudio_init },
+	{ .id = MC13892_VCAM, .init_data = &vcam_init },
+	{ .id = MC13892_VGEN1, .init_data = &vgen1_init },
+	{ .id = MC13892_VGEN2, .init_data = &vgen2_init },
+	{ .id = MC13892_VGEN3, .init_data = &vgen3_init },
+	{ .id = MC13892_VUSB, .init_data = &vusb_init },
+};
+
+static struct mc13xxx_platform_data mx35_3ds_mc13892_data = {
+	.flags = MC13XXX_USE_RTC | MC13XXX_USE_TOUCHSCREEN,
+	.regulators = {
+		.num_regulators = ARRAY_SIZE(mx35_3ds_regulators),
+		.regulators = mx35_3ds_regulators,
+	},
+};
+
+#define GPIO_PMIC_INT IMX_GPIO_NR(2, 0)
+
+static struct i2c_board_info mx35_3ds_i2c_mc13892 = {
+
+	I2C_BOARD_INFO("mc13892", 0x08),
+	.platform_data = &mx35_3ds_mc13892_data,
+	.irq = IMX_GPIO_TO_IRQ(GPIO_PMIC_INT),
+};
+
+static void __init imx35_3ds_init_mc13892(void)
+{
+	int ret = gpio_request_one(GPIO_PMIC_INT, GPIOF_DIR_IN, "pmic irq");
+
+	if (ret) {
+		pr_err("failed to get pmic irq: %d\n", ret);
+		return;
+	}
+
+	i2c_register_board_info(0, &mx35_3ds_i2c_mc13892, 1);
+}
+
 static int mx35_3ds_otg_init(struct platform_device *pdev)
 {
 	return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY);
@@ -412,6 +602,8 @@ static void __init mx35_3ds_init(void)
 	imx35_fb_pdev = imx35_add_mx3_sdc_fb(&mx3fb_pdata);
 	mx35_3ds_lcd.dev.parent = &imx35_fb_pdev->dev;
 	platform_device_register(&mx35_3ds_lcd);
+
+	imx35_3ds_init_mc13892();
 }
 
 static void __init mx35pdk_timer_init(void)
@@ -419,7 +611,7 @@ static void __init mx35pdk_timer_init(void)
 	mx35_clocks_init();
 }
 
-struct sys_timer mx35pdk_timer = {
+static struct sys_timer mx35pdk_timer = {
 	.init	= mx35pdk_timer_init,
 };
 
diff --git a/arch/arm/mach-imx/mach-mx51_3ds.c b/arch/arm/mach-imx/mach-mx51_3ds.c
index 83eab4176ca4..3c5b163923f6 100644
--- a/arch/arm/mach-imx/mach-mx51_3ds.c
+++ b/arch/arm/mach-imx/mach-mx51_3ds.c
@@ -175,5 +175,6 @@ MACHINE_START(MX51_3DS, "Freescale MX51 3-Stack Board")
 	.handle_irq = imx51_handle_irq,
 	.timer = &mx51_3ds_timer,
 	.init_machine = mx51_3ds_init,
+	.init_late	= imx51_init_late,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx51_babbage.c b/arch/arm/mach-imx/mach-mx51_babbage.c
index e4b822e9f719..dde397014d4b 100644
--- a/arch/arm/mach-imx/mach-mx51_babbage.c
+++ b/arch/arm/mach-imx/mach-mx51_babbage.c
@@ -163,6 +163,12 @@ static iomux_v3_cfg_t mx51babbage_pads[] = {
 	MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
 	MX51_PAD_CSPI1_SS0__GPIO4_24,
 	MX51_PAD_CSPI1_SS1__GPIO4_25,
+
+	/* Audio */
+	MX51_PAD_AUD3_BB_TXD__AUD3_TXD,
+	MX51_PAD_AUD3_BB_RXD__AUD3_RXD,
+	MX51_PAD_AUD3_BB_CK__AUD3_TXC,
+	MX51_PAD_AUD3_BB_FS__AUD3_TXFS,
 };
 
 /* Serial ports */
@@ -426,5 +432,6 @@ MACHINE_START(MX51_BABBAGE, "Freescale MX51 Babbage Board")
 	.handle_irq = imx51_handle_irq,
 	.timer = &mx51_babbage_timer,
 	.init_machine = mx51_babbage_init,
+	.init_late	= imx51_init_late,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx51_efikamx.c b/arch/arm/mach-imx/mach-mx51_efikamx.c
index 586e9f822124..8d09c0126cab 100644
--- a/arch/arm/mach-imx/mach-mx51_efikamx.c
+++ b/arch/arm/mach-imx/mach-mx51_efikamx.c
@@ -207,29 +207,32 @@ static void mx51_efikamx_power_off(void)
 
 static int __init mx51_efikamx_power_init(void)
 {
-	if (machine_is_mx51_efikamx()) {
-		pwgt1 = regulator_get(NULL, "pwgt1");
-		pwgt2 = regulator_get(NULL, "pwgt2");
-		if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) {
-			regulator_enable(pwgt1);
-			regulator_enable(pwgt2);
-		}
-		gpio_request(EFIKAMX_POWEROFF, "poweroff");
-		pm_power_off = mx51_efikamx_power_off;
-
-		/* enable coincell charger. maybe need a small power driver ? */
-		coincell = regulator_get(NULL, "coincell");
-		if (!IS_ERR(coincell)) {
-			regulator_set_voltage(coincell, 3000000, 3000000);
-			regulator_enable(coincell);
-		}
-
-		regulator_has_full_constraints();
+	pwgt1 = regulator_get(NULL, "pwgt1");
+	pwgt2 = regulator_get(NULL, "pwgt2");
+	if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) {
+		regulator_enable(pwgt1);
+		regulator_enable(pwgt2);
+	}
+	gpio_request(EFIKAMX_POWEROFF, "poweroff");
+	pm_power_off = mx51_efikamx_power_off;
+
+	/* enable coincell charger. maybe need a small power driver ? */
+	coincell = regulator_get(NULL, "coincell");
+	if (!IS_ERR(coincell)) {
+		regulator_set_voltage(coincell, 3000000, 3000000);
+		regulator_enable(coincell);
 	}
 
+	regulator_has_full_constraints();
+
 	return 0;
 }
-late_initcall(mx51_efikamx_power_init);
+
+static void __init mx51_efikamx_init_late(void)
+{
+	imx51_init_late();
+	mx51_efikamx_power_init();
+}
 
 static void __init mx51_efikamx_init(void)
 {
@@ -284,8 +287,7 @@ static struct sys_timer mx51_efikamx_timer = {
 	.init = mx51_efikamx_timer_init,
 };
 
-MACHINE_START(MX51_EFIKAMX, "Genesi EfikaMX nettop")
-	/* Maintainer: Amit Kucheria <amit.kucheria@linaro.org> */
+MACHINE_START(MX51_EFIKAMX, "Genesi Efika MX (Smarttop)")
 	.atag_offset = 0x100,
 	.map_io = mx51_map_io,
 	.init_early = imx51_init_early,
@@ -293,5 +295,6 @@ MACHINE_START(MX51_EFIKAMX, "Genesi EfikaMX nettop")
 	.handle_irq = imx51_handle_irq,
 	.timer = &mx51_efikamx_timer,
 	.init_machine = mx51_efikamx_init,
+	.init_late = mx51_efikamx_init_late,
 	.restart = mx51_efikamx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx51_efikasb.c b/arch/arm/mach-imx/mach-mx51_efikasb.c
index 24aded9e109f..fdbd181b97ef 100644
--- a/arch/arm/mach-imx/mach-mx51_efikasb.c
+++ b/arch/arm/mach-imx/mach-mx51_efikasb.c
@@ -211,22 +211,25 @@ static void mx51_efikasb_power_off(void)
 
 static int __init mx51_efikasb_power_init(void)
 {
-	if (machine_is_mx51_efikasb()) {
-		pwgt1 = regulator_get(NULL, "pwgt1");
-		pwgt2 = regulator_get(NULL, "pwgt2");
-		if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) {
-			regulator_enable(pwgt1);
-			regulator_enable(pwgt2);
-		}
-		gpio_request(EFIKASB_POWEROFF, "poweroff");
-		pm_power_off = mx51_efikasb_power_off;
-
-		regulator_has_full_constraints();
+	pwgt1 = regulator_get(NULL, "pwgt1");
+	pwgt2 = regulator_get(NULL, "pwgt2");
+	if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) {
+		regulator_enable(pwgt1);
+		regulator_enable(pwgt2);
 	}
+	gpio_request(EFIKASB_POWEROFF, "poweroff");
+	pm_power_off = mx51_efikasb_power_off;
+
+	regulator_has_full_constraints();
 
 	return 0;
 }
-late_initcall(mx51_efikasb_power_init);
+
+static void __init mx51_efikasb_init_late(void)
+{
+	imx51_init_late();
+	mx51_efikasb_power_init();
+}
 
 /* 01     R1.3 board
    10     R2.0 board */
@@ -280,13 +283,14 @@ static struct sys_timer mx51_efikasb_timer = {
 	.init	= mx51_efikasb_timer_init,
 };
 
-MACHINE_START(MX51_EFIKASB, "Genesi Efika Smartbook")
+MACHINE_START(MX51_EFIKASB, "Genesi Efika MX (Smartbook)")
 	.atag_offset = 0x100,
 	.map_io = mx51_map_io,
 	.init_early = imx51_init_early,
 	.init_irq = mx51_init_irq,
 	.handle_irq = imx51_handle_irq,
 	.init_machine =  efikasb_board_init,
+	.init_late = mx51_efikasb_init_late,
 	.timer = &mx51_efikasb_timer,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx53_ard.c b/arch/arm/mach-imx/mach-mx53_ard.c
index 753f4fc9ec04..05641980dc5e 100644
--- a/arch/arm/mach-imx/mach-mx53_ard.c
+++ b/arch/arm/mach-imx/mach-mx53_ard.c
@@ -23,6 +23,8 @@
 #include <linux/delay.h>
 #include <linux/gpio.h>
 #include <linux/smsc911x.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
 
 #include <mach/common.h>
 #include <mach/hardware.h>
@@ -214,6 +216,11 @@ static int weim_cs_config(void)
 	return 0;
 }
 
+static struct regulator_consumer_supply dummy_supplies[] = {
+	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+	REGULATOR_SUPPLY("vddvario", "smsc911x"),
+};
+
 void __init imx53_ard_common_init(void)
 {
 	mxc_iomux_v3_setup_multiple_pads(mx53_ard_pads,
@@ -232,6 +239,7 @@ static void __init mx53_ard_board_init(void)
 
 	imx53_ard_common_init();
 	mx53_ard_io_init();
+	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
 	imx53_add_sdhci_esdhc_imx(0, &mx53_ard_sd1_data);
diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c
index 5fddf94cc969..0a40004154f2 100644
--- a/arch/arm/mach-imx/mach-pcm037.c
+++ b/arch/arm/mach-imx/mach-pcm037.c
@@ -683,7 +683,7 @@ static void __init pcm037_timer_init(void)
 	mx31_clocks_init(26000000);
 }
 
-struct sys_timer pcm037_timer = {
+static struct sys_timer pcm037_timer = {
 	.init	= pcm037_timer_init,
 };
 
@@ -694,6 +694,11 @@ static void __init pcm037_reserve(void)
 			MX3_CAMERA_BUF_SIZE);
 }
 
+static void __init pcm037_init_late(void)
+{
+	pcm037_eet_init_devices();
+}
+
 MACHINE_START(PCM037, "Phytec Phycore pcm037")
 	/* Maintainer: Pengutronix */
 	.atag_offset = 0x100,
@@ -704,5 +709,6 @@ MACHINE_START(PCM037, "Phytec Phycore pcm037")
 	.handle_irq = imx31_handle_irq,
 	.timer = &pcm037_timer,
 	.init_machine = pcm037_init,
+	.init_late = pcm037_init_late,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-pcm037_eet.c b/arch/arm/mach-imx/mach-pcm037_eet.c
index 1b7606bef8f4..11ffa81ad17d 100644
--- a/arch/arm/mach-imx/mach-pcm037_eet.c
+++ b/arch/arm/mach-imx/mach-pcm037_eet.c
@@ -160,9 +160,9 @@ static const struct gpio_keys_platform_data
 	.rep		= 0, /* No auto-repeat */
 };
 
-static int __init eet_init_devices(void)
+int __init pcm037_eet_init_devices(void)
 {
-	if (!machine_is_pcm037() || pcm037_variant() != PCM037_EET)
+	if (pcm037_variant() != PCM037_EET)
 		return 0;
 
 	mxc_iomux_setup_multiple_pins(pcm037_eet_pins,
@@ -176,4 +176,3 @@ static int __init eet_init_devices(void)
 
 	return 0;
 }
-late_initcall(eet_init_devices);
diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c
index 237474fcca23..73585f55cca0 100644
--- a/arch/arm/mach-imx/mach-pcm043.c
+++ b/arch/arm/mach-imx/mach-pcm043.c
@@ -399,7 +399,7 @@ static void __init pcm043_timer_init(void)
 	mx35_clocks_init();
 }
 
-struct sys_timer pcm043_timer = {
+static struct sys_timer pcm043_timer = {
 	.init	= pcm043_timer_init,
 };
 
diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c
index 033257e553ef..add8c69c6c1a 100644
--- a/arch/arm/mach-imx/mach-vpr200.c
+++ b/arch/arm/mach-imx/mach-vpr200.c
@@ -310,7 +310,7 @@ static void __init vpr200_timer_init(void)
 	mx35_clocks_init();
 }
 
-struct sys_timer vpr200_timer = {
+static struct sys_timer vpr200_timer = {
 	.init	= vpr200_timer_init,
 };
 
diff --git a/arch/arm/mach-imx/mm-imx1.c b/arch/arm/mach-imx/mm-imx1.c
index 2bded591d5c2..fcafd3dafb8c 100644
--- a/arch/arm/mach-imx/mm-imx1.c
+++ b/arch/arm/mach-imx/mm-imx1.c
@@ -18,6 +18,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/pinctrl/machine.h>
 
 #include <asm/mach/map.h>
 
@@ -58,4 +59,5 @@ void __init imx1_soc_init(void)
 						MX1_GPIO_INT_PORTC, 0);
 	mxc_register_gpio("imx1-gpio", 3, MX1_GPIO4_BASE_ADDR, SZ_256,
 						MX1_GPIO_INT_PORTD, 0);
+	pinctrl_provide_dummies();
 }
diff --git a/arch/arm/mach-imx/mm-imx21.c b/arch/arm/mach-imx/mm-imx21.c
index 14d540edfd1e..5f43905e5290 100644
--- a/arch/arm/mach-imx/mm-imx21.c
+++ b/arch/arm/mach-imx/mm-imx21.c
@@ -20,6 +20,7 @@
 
 #include <linux/mm.h>
 #include <linux/init.h>
+#include <linux/pinctrl/machine.h>
 #include <mach/hardware.h>
 #include <mach/common.h>
 #include <mach/devices-common.h>
@@ -88,6 +89,7 @@ void __init imx21_soc_init(void)
 	mxc_register_gpio("imx21-gpio", 4, MX21_GPIO5_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
 	mxc_register_gpio("imx21-gpio", 5, MX21_GPIO6_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
 
+	pinctrl_provide_dummies();
 	imx_add_imx_dma();
 	platform_device_register_simple("imx21-audmux", 0, imx21_audmux_res,
 					ARRAY_SIZE(imx21_audmux_res));
diff --git a/arch/arm/mach-imx/mm-imx25.c b/arch/arm/mach-imx/mm-imx25.c
index 153b457acdc0..6ff37140a4f8 100644
--- a/arch/arm/mach-imx/mm-imx25.c
+++ b/arch/arm/mach-imx/mm-imx25.c
@@ -19,6 +19,7 @@
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/err.h>
+#include <linux/pinctrl/machine.h>
 
 #include <asm/pgtable.h>
 #include <asm/mach/map.h>
@@ -95,6 +96,7 @@ void __init imx25_soc_init(void)
 	mxc_register_gpio("imx31-gpio", 2, MX25_GPIO3_BASE_ADDR, SZ_16K, MX25_INT_GPIO3, 0);
 	mxc_register_gpio("imx31-gpio", 3, MX25_GPIO4_BASE_ADDR, SZ_16K, MX25_INT_GPIO4, 0);
 
+	pinctrl_provide_dummies();
 	/* i.mx25 has the i.mx35 type sdma */
 	imx_add_imx_sdma("imx35-sdma", MX25_SDMA_BASE_ADDR, MX25_INT_SDMA, &imx25_sdma_pdata);
 	/* i.mx25 has the i.mx31 type audmux */
diff --git a/arch/arm/mach-imx/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c
index 8cb3f5e3e569..25662558e018 100644
--- a/arch/arm/mach-imx/mm-imx27.c
+++ b/arch/arm/mach-imx/mm-imx27.c
@@ -20,6 +20,7 @@
 
 #include <linux/mm.h>
 #include <linux/init.h>
+#include <linux/pinctrl/machine.h>
 #include <mach/hardware.h>
 #include <mach/common.h>
 #include <mach/devices-common.h>
@@ -89,6 +90,7 @@ void __init imx27_soc_init(void)
 	mxc_register_gpio("imx21-gpio", 4, MX27_GPIO5_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
 	mxc_register_gpio("imx21-gpio", 5, MX27_GPIO6_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
 
+	pinctrl_provide_dummies();
 	imx_add_imx_dma();
 	/* imx27 has the imx21 type audmux */
 	platform_device_register_simple("imx21-audmux", 0, imx27_audmux_res,
diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c
index 74127389e7ab..967ed5b35a45 100644
--- a/arch/arm/mach-imx/mm-imx3.c
+++ b/arch/arm/mach-imx/mm-imx3.c
@@ -19,6 +19,7 @@
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/err.h>
+#include <linux/pinctrl/machine.h>
 
 #include <asm/pgtable.h>
 #include <asm/system_misc.h>
@@ -31,6 +32,10 @@
 #include <mach/iomux-v3.h>
 #include <mach/irqs.h>
 
+#include "crmregs-imx3.h"
+
+void __iomem *mx3_ccm_base;
+
 static void imx3_idle(void)
 {
 	unsigned long reg = 0;
@@ -137,6 +142,7 @@ void __init imx31_init_early(void)
 	mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
 	arch_ioremap_caller = imx3_ioremap_caller;
 	arm_pm_idle = imx3_idle;
+	mx3_ccm_base = MX31_IO_ADDRESS(MX31_CCM_BASE_ADDR);
 }
 
 void __init mx31_init_irq(void)
@@ -210,6 +216,7 @@ void __init imx35_init_early(void)
 	mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
 	arm_pm_idle = imx3_idle;
 	arch_ioremap_caller = imx3_ioremap_caller;
+	mx3_ccm_base = MX35_IO_ADDRESS(MX35_CCM_BASE_ADDR);
 }
 
 void __init mx35_init_irq(void)
@@ -267,6 +274,7 @@ void __init imx35_soc_init(void)
 	mxc_register_gpio("imx31-gpio", 1, MX35_GPIO2_BASE_ADDR, SZ_16K, MX35_INT_GPIO2, 0);
 	mxc_register_gpio("imx31-gpio", 2, MX35_GPIO3_BASE_ADDR, SZ_16K, MX35_INT_GPIO3, 0);
 
+	pinctrl_provide_dummies();
 	if (to_version == 1) {
 		strncpy(imx35_sdma_pdata.fw_name, "sdma-imx35-to1.bin",
 			strlen(imx35_sdma_pdata.fw_name));
diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c
index 05250aed61fb..feeee17da96b 100644
--- a/arch/arm/mach-imx/mm-imx5.c
+++ b/arch/arm/mach-imx/mm-imx5.c
@@ -14,6 +14,7 @@
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/clk.h>
+#include <linux/pinctrl/machine.h>
 
 #include <asm/system_misc.h>
 #include <asm/mach/map.h>
@@ -32,10 +33,11 @@ static void imx5_idle(void)
 		gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs");
 		if (IS_ERR(gpc_dvfs_clk))
 			return;
+		clk_prepare(gpc_dvfs_clk);
 	}
 	clk_enable(gpc_dvfs_clk);
 	mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
-	if (tzic_enable_wake() != 0)
+	if (!tzic_enable_wake())
 		cpu_do_idle();
 	clk_disable(gpc_dvfs_clk);
 }
@@ -223,6 +225,7 @@ void __init imx53_soc_init(void)
 	mxc_register_gpio("imx31-gpio", 5, MX53_GPIO6_BASE_ADDR, SZ_16K, MX53_INT_GPIO6_LOW, MX53_INT_GPIO6_HIGH);
 	mxc_register_gpio("imx31-gpio", 6, MX53_GPIO7_BASE_ADDR, SZ_16K, MX53_INT_GPIO7_LOW, MX53_INT_GPIO7_HIGH);
 
+	pinctrl_provide_dummies();
 	/* i.mx53 has the i.mx35 type sdma */
 	imx_add_imx_sdma("imx35-sdma", MX53_SDMA_BASE_ADDR, MX53_INT_SDMA, &imx53_sdma_pdata);
 
@@ -234,3 +237,8 @@ void __init imx53_soc_init(void)
 	platform_device_register_simple("imx31-audmux", 0, imx53_audmux_res,
 					ARRAY_SIZE(imx53_audmux_res));
 }
+
+void __init imx51_init_late(void)
+{
+	mx51_neon_fixup();
+}
diff --git a/arch/arm/mach-imx/pcm037.h b/arch/arm/mach-imx/pcm037.h
index d6929721a5fd..7d167690e17d 100644
--- a/arch/arm/mach-imx/pcm037.h
+++ b/arch/arm/mach-imx/pcm037.h
@@ -8,4 +8,10 @@ enum pcm037_board_variant {
 
 extern enum pcm037_board_variant pcm037_variant(void);
 
+#ifdef CONFIG_MACH_PCM037_EET
+int pcm037_eet_init_devices(void);
+#else
+static inline int pcm037_eet_init_devices(void) { return 0; }
+#endif
+
 #endif
diff --git a/arch/arm/mach-imx/pm-imx3.c b/arch/arm/mach-imx/pm-imx3.c
index b3752439632e..822103bdb709 100644
--- a/arch/arm/mach-imx/pm-imx3.c
+++ b/arch/arm/mach-imx/pm-imx3.c
@@ -21,14 +21,14 @@
  */
 void mx3_cpu_lp_set(enum mx3_cpu_pwr_mode mode)
 {
-	int reg = __raw_readl(MXC_CCM_CCMR);
+	int reg = __raw_readl(mx3_ccm_base + MXC_CCM_CCMR);
 	reg &= ~MXC_CCM_CCMR_LPM_MASK;
 
 	switch (mode) {
 	case MX3_WAIT:
 		if (cpu_is_mx35())
 			reg |= MXC_CCM_CCMR_LPM_WAIT_MX35;
-		__raw_writel(reg, MXC_CCM_CCMR);
+		__raw_writel(reg, mx3_ccm_base + MXC_CCM_CCMR);
 		break;
 	default:
 		pr_err("Unknown cpu power mode: %d\n", mode);
diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c
index 3e538da6cb1f..e428f3ab15c7 100644
--- a/arch/arm/mach-integrator/impd1.c
+++ b/arch/arm/mach-integrator/impd1.c
@@ -398,24 +398,16 @@ static int impd1_probe(struct lm_device *dev)
 		struct impd1_device *idev = impd1_devs + i;
 		struct amba_device *d;
 		unsigned long pc_base;
+		char devname[32];
 
 		pc_base = dev->resource.start + idev->offset;
-
-		d = amba_device_alloc(NULL, pc_base, SZ_4K);
-		if (!d)
+		snprintf(devname, 32, "lm%x:%5.5lx", dev->id, idev->offset >> 12);
+		d = amba_ahb_device_add(&dev->dev, devname, pc_base, SZ_4K,
+					dev->irq, dev->irq,
+					idev->platform_data, idev->id);
+		if (IS_ERR(d)) {
+			dev_err(&dev->dev, "unable to register device: %ld\n", PTR_ERR(d));
 			continue;
-
-		dev_set_name(&d->dev, "lm%x:%5.5lx", dev->id, idev->offset >> 12);
-		d->dev.parent	= &dev->dev;
-		d->irq[0]	= dev->irq;
-		d->irq[1]	= dev->irq;
-		d->periphid	= idev->id;
-		d->dev.platform_data = idev->platform_data;
-
-		ret = amba_device_add(d, &dev->resource);
-		if (ret) {
-			dev_err(&d->dev, "unable to register device: %d\n", ret);
-			amba_device_put(d);
 		}
 	}
 
diff --git a/arch/arm/mach-integrator/include/mach/entry-macro.S b/arch/arm/mach-integrator/include/mach/entry-macro.S
deleted file mode 100644
index 5cc7b85ad9df..000000000000
--- a/arch/arm/mach-integrator/include/mach/entry-macro.S
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * arch/arm/mach-integrator/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for Integrator platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <mach/hardware.h>
-#include <mach/platform.h>
-#include <mach/irqs.h>
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-/* FIXME: should not be using soo many LDRs here */
-		ldr	\base, =IO_ADDRESS(INTEGRATOR_IC_BASE)
-		mov	\irqnr, #IRQ_PIC_START
-		ldr	\irqstat, [\base, #IRQ_STATUS]		@ get masked status
-		ldr	\base, =IO_ADDRESS(INTEGRATOR_HDR_BASE)
-		teq	\irqstat, #0
-		ldreq	\irqstat, [\base, #(INTEGRATOR_HDR_IC_OFFSET+IRQ_STATUS)]
-		moveq	\irqnr, #IRQ_CIC_START
-
-1001:		tst	\irqstat, #15
-		bne	1002f
-		add	\irqnr, \irqnr, #4
-		movs	\irqstat, \irqstat, lsr #4
-		bne	1001b
-1002:		tst	\irqstat, #1
-		bne	1003f
-		add	\irqnr, \irqnr, #1
-		movs	\irqstat, \irqstat, lsr #1
-		bne	1002b
-1003:		/* EQ will be set if no irqs pending */
-		.endm
-
diff --git a/arch/arm/mach-integrator/include/mach/irqs.h b/arch/arm/mach-integrator/include/mach/irqs.h
index a19a1a2fcf6b..7371018455d2 100644
--- a/arch/arm/mach-integrator/include/mach/irqs.h
+++ b/arch/arm/mach-integrator/include/mach/irqs.h
@@ -22,37 +22,37 @@
 /* 
  *  Interrupt numbers
  */
-#define IRQ_PIC_START			0
-#define IRQ_SOFTINT			0
-#define IRQ_UARTINT0			1
-#define IRQ_UARTINT1			2
-#define IRQ_KMIINT0			3
-#define IRQ_KMIINT1			4
-#define IRQ_TIMERINT0			5
-#define IRQ_TIMERINT1			6
-#define IRQ_TIMERINT2			7
-#define IRQ_RTCINT			8
-#define IRQ_AP_EXPINT0			9
-#define IRQ_AP_EXPINT1			10
-#define IRQ_AP_EXPINT2			11
-#define IRQ_AP_EXPINT3			12
-#define IRQ_AP_PCIINT0			13
-#define IRQ_AP_PCIINT1			14
-#define IRQ_AP_PCIINT2			15
-#define IRQ_AP_PCIINT3			16
-#define IRQ_AP_V3INT			17
-#define IRQ_AP_CPINT0			18
-#define IRQ_AP_CPINT1			19
-#define IRQ_AP_LBUSTIMEOUT 		20
-#define IRQ_AP_APCINT			21
-#define IRQ_CP_CLCDCINT			22
-#define IRQ_CP_MMCIINT0			23
-#define IRQ_CP_MMCIINT1			24
-#define IRQ_CP_AACIINT			25
-#define IRQ_CP_CPPLDINT			26
-#define IRQ_CP_ETHINT			27
-#define IRQ_CP_TSPENINT			28
-#define IRQ_PIC_END			31
+#define IRQ_PIC_START			1
+#define IRQ_SOFTINT			1
+#define IRQ_UARTINT0			2
+#define IRQ_UARTINT1			3
+#define IRQ_KMIINT0			4
+#define IRQ_KMIINT1			5
+#define IRQ_TIMERINT0			6
+#define IRQ_TIMERINT1			7
+#define IRQ_TIMERINT2			8
+#define IRQ_RTCINT			9
+#define IRQ_AP_EXPINT0			10
+#define IRQ_AP_EXPINT1			11
+#define IRQ_AP_EXPINT2			12
+#define IRQ_AP_EXPINT3			13
+#define IRQ_AP_PCIINT0			14
+#define IRQ_AP_PCIINT1			15
+#define IRQ_AP_PCIINT2			16
+#define IRQ_AP_PCIINT3			17
+#define IRQ_AP_V3INT			18
+#define IRQ_AP_CPINT0			19
+#define IRQ_AP_CPINT1			20
+#define IRQ_AP_LBUSTIMEOUT 		21
+#define IRQ_AP_APCINT			22
+#define IRQ_CP_CLCDCINT			23
+#define IRQ_CP_MMCIINT0			24
+#define IRQ_CP_MMCIINT1			25
+#define IRQ_CP_AACIINT			26
+#define IRQ_CP_CPPLDINT			27
+#define IRQ_CP_ETHINT			28
+#define IRQ_CP_TSPENINT			29
+#define IRQ_PIC_END			29
 
 #define IRQ_CIC_START			32
 #define IRQ_CM_SOFTINT			32
@@ -80,4 +80,3 @@
 
 #define NR_IRQS_INTEGRATOR_AP		34
 #define NR_IRQS_INTEGRATOR_CP		47
-
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index 871f148ffd72..c857501c5783 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -162,12 +162,6 @@ static void __init ap_map_io(void)
 
 #define INTEGRATOR_SC_VALID_INT	0x003fffff
 
-static struct fpga_irq_data sc_irq_data = {
-	.base		= VA_IC_BASE,
-	.irq_start	= 0,
-	.chip.name	= "SC",
-};
-
 static void __init ap_init_irq(void)
 {
 	/* Disable all interrupts initially. */
@@ -178,7 +172,8 @@ static void __init ap_init_irq(void)
 	writel(-1, VA_IC_BASE + IRQ_ENABLE_CLEAR);
 	writel(-1, VA_IC_BASE + FIQ_ENABLE_CLEAR);
 
-	fpga_irq_init(-1, INTEGRATOR_SC_VALID_INT, &sc_irq_data);
+	fpga_irq_init(VA_IC_BASE, "SC", IRQ_PIC_START,
+		-1, INTEGRATOR_SC_VALID_INT, NULL);
 }
 
 #ifdef CONFIG_PM
@@ -478,6 +473,7 @@ MACHINE_START(INTEGRATOR, "ARM-Integrator")
 	.nr_irqs	= NR_IRQS_INTEGRATOR_AP,
 	.init_early	= integrator_init_early,
 	.init_irq	= ap_init_irq,
+	.handle_irq	= fpga_handle_irq,
 	.timer		= &ap_timer,
 	.init_machine	= ap_init,
 	.restart	= integrator_restart,
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 48a115a91d9d..a56c53608939 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -143,30 +143,14 @@ static void __init intcp_map_io(void)
 	iotable_init(intcp_io_desc, ARRAY_SIZE(intcp_io_desc));
 }
 
-static struct fpga_irq_data cic_irq_data = {
-	.base		= INTCP_VA_CIC_BASE,
-	.irq_start	= IRQ_CIC_START,
-	.chip.name	= "CIC",
-};
-
-static struct fpga_irq_data pic_irq_data = {
-	.base		= INTCP_VA_PIC_BASE,
-	.irq_start	= IRQ_PIC_START,
-	.chip.name	= "PIC",
-};
-
-static struct fpga_irq_data sic_irq_data = {
-	.base		= INTCP_VA_SIC_BASE,
-	.irq_start	= IRQ_SIC_START,
-	.chip.name	= "SIC",
-};
-
 static void __init intcp_init_irq(void)
 {
-	u32 pic_mask, sic_mask;
+	u32 pic_mask, cic_mask, sic_mask;
 
+	/* These masks are for the HW IRQ registers */
 	pic_mask = ~((~0u) << (11 - IRQ_PIC_START));
 	pic_mask |= (~((~0u) << (29 - 22))) << 22;
+	cic_mask = ~((~0u) << (1 + IRQ_CIC_END - IRQ_CIC_START));
 	sic_mask = ~((~0u) << (1 + IRQ_SIC_END - IRQ_SIC_START));
 
 	/*
@@ -179,12 +163,14 @@ static void __init intcp_init_irq(void)
 	writel(sic_mask, INTCP_VA_SIC_BASE + IRQ_ENABLE_CLEAR);
 	writel(sic_mask, INTCP_VA_SIC_BASE + FIQ_ENABLE_CLEAR);
 
-	fpga_irq_init(-1, pic_mask, &pic_irq_data);
+	fpga_irq_init(INTCP_VA_PIC_BASE, "PIC", IRQ_PIC_START,
+		      -1, pic_mask, NULL);
 
-	fpga_irq_init(-1, ~((~0u) << (1 + IRQ_CIC_END - IRQ_CIC_START)),
-		&cic_irq_data);
+	fpga_irq_init(INTCP_VA_CIC_BASE, "CIC", IRQ_CIC_START,
+		      -1, cic_mask, NULL);
 
-	fpga_irq_init(IRQ_CP_CPPLDINT, sic_mask, &sic_irq_data);
+	fpga_irq_init(INTCP_VA_SIC_BASE, "SIC", IRQ_SIC_START,
+		      IRQ_CP_CPPLDINT, sic_mask, NULL);
 }
 
 /*
@@ -467,6 +453,7 @@ MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP")
 	.nr_irqs	= NR_IRQS_INTEGRATOR_CP,
 	.init_early	= intcp_init_early,
 	.init_irq	= intcp_init_irq,
+	.handle_irq	= fpga_handle_irq,
 	.timer		= &cp_timer,
 	.init_machine	= intcp_init,
 	.restart	= integrator_restart,
diff --git a/arch/arm/mach-integrator/pci.c b/arch/arm/mach-integrator/pci.c
index f1ca9c122861..6c1667e728f5 100644
--- a/arch/arm/mach-integrator/pci.c
+++ b/arch/arm/mach-integrator/pci.c
@@ -70,21 +70,10 @@
  */
 static u8 __init integrator_swizzle(struct pci_dev *dev, u8 *pinp)
 {
-	int pin = *pinp;
+	if (*pinp == 0)
+		*pinp = 1;
 
-	if (pin == 0)
-		pin = 1;
-
-	while (dev->bus->self) {
-		pin = pci_swizzle_interrupt_pin(dev, pin);
-		/*
-		 * move up the chain of bridges, swizzling as we go.
-		 */
-		dev = dev->bus->self;
-	}
-	*pinp = pin;
-
-	return PCI_SLOT(dev->devfn);
+	return pci_common_swizzle(dev, pinp);
 }
 
 static int irq_tab[4] __initdata = {
@@ -109,7 +98,7 @@ static struct hw_pci integrator_pci __initdata = {
 	.map_irq		= integrator_map_irq,
 	.setup			= pci_v3_setup,
 	.nr_controllers		= 1,
-	.scan			= pci_v3_scan_bus,
+	.ops			= &pci_v3_ops,
 	.preinit		= pci_v3_preinit,
 	.postinit		= pci_v3_postinit,
 };
diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c
index 67e6f9a9d1a0..b866880e82ac 100644
--- a/arch/arm/mach-integrator/pci_v3.c
+++ b/arch/arm/mach-integrator/pci_v3.c
@@ -340,7 +340,7 @@ static int v3_write_config(struct pci_bus *bus, unsigned int devfn, int where,
 	return PCIBIOS_SUCCESSFUL;
 }
 
-static struct pci_ops pci_v3_ops = {
+struct pci_ops pci_v3_ops = {
 	.read	= v3_read_config,
 	.write	= v3_write_config,
 };
@@ -488,12 +488,6 @@ int __init pci_v3_setup(int nr, struct pci_sys_data *sys)
 	return ret;
 }
 
-struct pci_bus * __init pci_v3_scan_bus(int nr, struct pci_sys_data *sys)
-{
-	return pci_scan_root_bus(NULL, sys->busnr, &pci_v3_ops, sys,
-				 &sys->resources);
-}
-
 /*
  * V3_LB_BASE? - local bus address
  * V3_LB_MAP?  - pci bus address
diff --git a/arch/arm/mach-iop13xx/iq81340mc.c b/arch/arm/mach-iop13xx/iq81340mc.c
index 5c96b73e6964..e3f3e7daa79e 100644
--- a/arch/arm/mach-iop13xx/iq81340mc.c
+++ b/arch/arm/mach-iop13xx/iq81340mc.c
@@ -54,7 +54,6 @@ iq81340mc_pcix_map_irq(const struct pci_dev *dev, u8 idsel, u8 pin)
 }
 
 static struct hw_pci iq81340mc_pci __initdata = {
-	.swizzle	= pci_std_swizzle,
 	.nr_controllers = 0,
 	.setup		= iop13xx_pci_setup,
 	.map_irq	= iq81340mc_pcix_map_irq,
diff --git a/arch/arm/mach-iop13xx/iq81340sc.c b/arch/arm/mach-iop13xx/iq81340sc.c
index aa4dd750135a..060cddde2fd4 100644
--- a/arch/arm/mach-iop13xx/iq81340sc.c
+++ b/arch/arm/mach-iop13xx/iq81340sc.c
@@ -56,7 +56,6 @@ iq81340sc_atux_map_irq(struct pci_dev *dev, u8 idsel, u8 pin)
 }
 
 static struct hw_pci iq81340sc_pci __initdata = {
-	.swizzle	= pci_std_swizzle,
 	.nr_controllers = 0,
 	.setup		= iop13xx_pci_setup,
 	.scan		= iop13xx_scan_bus,
diff --git a/arch/arm/mach-iop32x/em7210.c b/arch/arm/mach-iop32x/em7210.c
index 24069e03fdc1..9f369f09c29d 100644
--- a/arch/arm/mach-iop32x/em7210.c
+++ b/arch/arm/mach-iop32x/em7210.c
@@ -103,11 +103,10 @@ em7210_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 }
 
 static struct hw_pci em7210_pci __initdata = {
-	.swizzle	= pci_std_swizzle,
 	.nr_controllers = 1,
+	.ops		= &iop3xx_ops,
 	.setup		= iop3xx_pci_setup,
 	.preinit	= iop3xx_pci_preinit,
-	.scan		= iop3xx_pci_scan_bus,
 	.map_irq	= em7210_pci_map_irq,
 };
 
diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c
index 204e1d1cd766..c15a100ba779 100644
--- a/arch/arm/mach-iop32x/glantank.c
+++ b/arch/arm/mach-iop32x/glantank.c
@@ -96,11 +96,10 @@ glantank_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 }
 
 static struct hw_pci glantank_pci __initdata = {
-	.swizzle	= pci_std_swizzle,
 	.nr_controllers = 1,
+	.ops		= &iop3xx_ops,
 	.setup		= iop3xx_pci_setup,
 	.preinit	= iop3xx_pci_preinit,
-	.scan		= iop3xx_pci_scan_bus,
 	.map_irq	= glantank_pci_map_irq,
 };
 
diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c
index 3eb642af1cdc..ddd1c7ecfe57 100644
--- a/arch/arm/mach-iop32x/iq31244.c
+++ b/arch/arm/mach-iop32x/iq31244.c
@@ -130,11 +130,10 @@ ep80219_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 }
 
 static struct hw_pci ep80219_pci __initdata = {
-	.swizzle	= pci_std_swizzle,
 	.nr_controllers = 1,
+	.ops		= &iop3xx_ops,
 	.setup		= iop3xx_pci_setup,
 	.preinit	= iop3xx_pci_preinit,
-	.scan		= iop3xx_pci_scan_bus,
 	.map_irq	= ep80219_pci_map_irq,
 };
 
@@ -166,11 +165,10 @@ iq31244_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 }
 
 static struct hw_pci iq31244_pci __initdata = {
-	.swizzle	= pci_std_swizzle,
 	.nr_controllers = 1,
+	.ops		= &iop3xx_ops,
 	.setup		= iop3xx_pci_setup,
 	.preinit	= iop3xx_pci_preinit,
-	.scan		= iop3xx_pci_scan_bus,
 	.map_irq	= iq31244_pci_map_irq,
 };
 
diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c
index 2ec724b58a2c..bf155e6a3b45 100644
--- a/arch/arm/mach-iop32x/iq80321.c
+++ b/arch/arm/mach-iop32x/iq80321.c
@@ -101,11 +101,10 @@ iq80321_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 }
 
 static struct hw_pci iq80321_pci __initdata = {
-	.swizzle	= pci_std_swizzle,
 	.nr_controllers = 1,
+	.ops		= &iop3xx_ops,
 	.setup		= iop3xx_pci_setup,
 	.preinit	= iop3xx_pci_preinit_cond,
-	.scan		= iop3xx_pci_scan_bus,
 	.map_irq	= iq80321_pci_map_irq,
 };
 
diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
index 6b6d55912444..5a7ae91e8849 100644
--- a/arch/arm/mach-iop32x/n2100.c
+++ b/arch/arm/mach-iop32x/n2100.c
@@ -114,11 +114,10 @@ n2100_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 }
 
 static struct hw_pci n2100_pci __initdata = {
-	.swizzle	= pci_std_swizzle,
 	.nr_controllers = 1,
+	.ops		= &iop3xx_ops,
 	.setup		= iop3xx_pci_setup,
 	.preinit	= iop3xx_pci_preinit,
-	.scan		= iop3xx_pci_scan_bus,
 	.map_irq	= n2100_pci_map_irq,
 };
 
diff --git a/arch/arm/mach-iop33x/iq80331.c b/arch/arm/mach-iop33x/iq80331.c
index abce934f3816..e74a7debe793 100644
--- a/arch/arm/mach-iop33x/iq80331.c
+++ b/arch/arm/mach-iop33x/iq80331.c
@@ -84,11 +84,10 @@ iq80331_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 }
 
 static struct hw_pci iq80331_pci __initdata = {
-	.swizzle	= pci_std_swizzle,
 	.nr_controllers = 1,
+	.ops		= &iop3xx_ops,
 	.setup		= iop3xx_pci_setup,
 	.preinit	= iop3xx_pci_preinit_cond,
-	.scan		= iop3xx_pci_scan_bus,
 	.map_irq	= iq80331_pci_map_irq,
 };
 
diff --git a/arch/arm/mach-iop33x/iq80332.c b/arch/arm/mach-iop33x/iq80332.c
index 7513559e25bb..e2f5beece6e8 100644
--- a/arch/arm/mach-iop33x/iq80332.c
+++ b/arch/arm/mach-iop33x/iq80332.c
@@ -84,11 +84,10 @@ iq80332_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 }
 
 static struct hw_pci iq80332_pci __initdata = {
-	.swizzle	= pci_std_swizzle,
 	.nr_controllers = 1,
+	.ops		= &iop3xx_ops,
 	.setup		= iop3xx_pci_setup,
 	.preinit	= iop3xx_pci_preinit_cond,
-	.scan		= iop3xx_pci_scan_bus,
 	.map_irq	= iq80332_pci_map_irq,
 };
 
diff --git a/arch/arm/mach-ixp2000/Kconfig b/arch/arm/mach-ixp2000/Kconfig
deleted file mode 100644
index 08d2707f6ca8..000000000000
--- a/arch/arm/mach-ixp2000/Kconfig
+++ /dev/null
@@ -1,72 +0,0 @@
-
-if ARCH_IXP2000
-
-config ARCH_SUPPORTS_BIG_ENDIAN
-	bool
-	default y
-
-menu "Intel IXP2400/2800 Implementation Options"
-
-comment "IXP2400/2800 Platforms"
-
-config ARCH_ENP2611
-	bool "Support Radisys ENP-2611"
-	help
-	  Say 'Y' here if you want your kernel to support the Radisys
-	  ENP2611 PCI network processing card. For more information on
-	  this card, see <file:Documentation/arm/IXP2000>.
-
-config ARCH_IXDP2400
-	bool "Support Intel IXDP2400"
-	help
-	  Say 'Y' here if you want your kernel to support the Intel
-	  IXDP2400 reference platform. For more information on
-	  this platform, see <file:Documentation/arm/IXP2000>.
-
-config ARCH_IXDP2800
-	bool "Support Intel IXDP2800"
-	help
-	  Say 'Y' here if you want your kernel to support the Intel
-	  IXDP2800 reference platform. For more information on
-	  this platform, see <file:Documentation/arm/IXP2000>.
-
-config ARCH_IXDP2X00
-	bool
-	depends on ARCH_IXDP2400 || ARCH_IXDP2800
-	default y	
-
-config ARCH_IXDP2401
-	bool "Support Intel IXDP2401"
-	help
-	  Say 'Y' here if you want your kernel to support the Intel
-	  IXDP2401 reference platform. For more information on
-	  this platform, see <file:Documentation/arm/IXP2000>.
-
-config ARCH_IXDP2801
-	bool "Support Intel IXDP2801 and IXDP28x5"
-	help
-	  Say 'Y' here if you want your kernel to support the Intel
-	  IXDP2801/2805/2855 reference platforms. For more information on
-	  this platform, see <file:Documentation/arm/IXP2000>.
-
-config MACH_IXDP28X5
-	bool
-	depends on ARCH_IXDP2801
-	default y
-
-config ARCH_IXDP2X01
-	bool
-	depends on ARCH_IXDP2401 || ARCH_IXDP2801
-	default y	
-
-config IXP2000_SUPPORT_BROKEN_PCI_IO
-	bool "Support broken PCI I/O on older IXP2000s"
-	default y
-	help
-	  Say 'N' here if you only intend to run your kernel on an
-	  IXP2000 B0 or later model and do not need the PCI I/O
-	  byteswap workaround.  Say 'Y' otherwise.
-
-endmenu
-
-endif
diff --git a/arch/arm/mach-ixp2000/Makefile b/arch/arm/mach-ixp2000/Makefile
deleted file mode 100644
index 1e6139d42a92..000000000000
--- a/arch/arm/mach-ixp2000/Makefile
+++ /dev/null
@@ -1,14 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-obj-y			:= core.o pci.o
-obj-m			:=
-obj-n			:=
-obj-			:=
-
-obj-$(CONFIG_ARCH_ENP2611)	+= enp2611.o
-obj-$(CONFIG_ARCH_IXDP2400)	+= ixdp2400.o
-obj-$(CONFIG_ARCH_IXDP2800)	+= ixdp2800.o
-obj-$(CONFIG_ARCH_IXDP2X00)	+= ixdp2x00.o
-obj-$(CONFIG_ARCH_IXDP2X01)	+= ixdp2x01.o
-
diff --git a/arch/arm/mach-ixp2000/Makefile.boot b/arch/arm/mach-ixp2000/Makefile.boot
deleted file mode 100644
index 9c7af91d93da..000000000000
--- a/arch/arm/mach-ixp2000/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
-   zreladdr-y	+= 0x00008000
-params_phys-y	:= 0x00000100
-
diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c
deleted file mode 100644
index f214cdff01cb..000000000000
--- a/arch/arm/mach-ixp2000/core.c
+++ /dev/null
@@ -1,520 +0,0 @@
-/*
- * arch/arm/mach-ixp2000/core.c
- *
- * Common routines used by all IXP2400/2800 based platforms.
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2004 (C) MontaVista Software, Inc. 
- *
- * Based on work Copyright (C) 2002-2003 Intel Corporation
- * 
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any 
- * warranty of any kind, whether express or implied.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/bitops.h>
-#include <linux/serial_8250.h>
-#include <linux/mm.h>
-#include <linux/export.h>
-
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/tlbflush.h>
-#include <asm/pgtable.h>
-
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-#include <asm/mach/irq.h>
-
-#include <mach/gpio-ixp2000.h>
-
-static DEFINE_SPINLOCK(ixp2000_slowport_lock);
-static unsigned long ixp2000_slowport_irq_flags;
-
-/*************************************************************************
- * Slowport access routines
- *************************************************************************/
-void ixp2000_acquire_slowport(struct slowport_cfg *new_cfg, struct slowport_cfg *old_cfg)
-{
-	spin_lock_irqsave(&ixp2000_slowport_lock, ixp2000_slowport_irq_flags);
-
-	old_cfg->CCR = *IXP2000_SLOWPORT_CCR;
-	old_cfg->WTC = *IXP2000_SLOWPORT_WTC2;
-	old_cfg->RTC = *IXP2000_SLOWPORT_RTC2;
-	old_cfg->PCR = *IXP2000_SLOWPORT_PCR;
-	old_cfg->ADC = *IXP2000_SLOWPORT_ADC;
-
-	ixp2000_reg_write(IXP2000_SLOWPORT_CCR, new_cfg->CCR);
-	ixp2000_reg_write(IXP2000_SLOWPORT_WTC2, new_cfg->WTC);
-	ixp2000_reg_write(IXP2000_SLOWPORT_RTC2, new_cfg->RTC);
-	ixp2000_reg_write(IXP2000_SLOWPORT_PCR, new_cfg->PCR);
-	ixp2000_reg_wrb(IXP2000_SLOWPORT_ADC, new_cfg->ADC);
-}
-
-void ixp2000_release_slowport(struct slowport_cfg *old_cfg)
-{
-	ixp2000_reg_write(IXP2000_SLOWPORT_CCR, old_cfg->CCR);
-	ixp2000_reg_write(IXP2000_SLOWPORT_WTC2, old_cfg->WTC);
-	ixp2000_reg_write(IXP2000_SLOWPORT_RTC2, old_cfg->RTC);
-	ixp2000_reg_write(IXP2000_SLOWPORT_PCR, old_cfg->PCR);
-	ixp2000_reg_wrb(IXP2000_SLOWPORT_ADC, old_cfg->ADC);
-
-	spin_unlock_irqrestore(&ixp2000_slowport_lock, 
-					ixp2000_slowport_irq_flags);
-}
-
-/*************************************************************************
- * Chip specific mappings shared by all IXP2000 systems
- *************************************************************************/
-static struct map_desc ixp2000_io_desc[] __initdata = {
-	{
-		.virtual	= IXP2000_CAP_VIRT_BASE,
-		.pfn		= __phys_to_pfn(IXP2000_CAP_PHYS_BASE),
-		.length		= IXP2000_CAP_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IXP2000_INTCTL_VIRT_BASE,
-		.pfn		= __phys_to_pfn(IXP2000_INTCTL_PHYS_BASE),
-		.length		= IXP2000_INTCTL_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IXP2000_PCI_CREG_VIRT_BASE,
-		.pfn		= __phys_to_pfn(IXP2000_PCI_CREG_PHYS_BASE),
-		.length		= IXP2000_PCI_CREG_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IXP2000_PCI_CSR_VIRT_BASE,
-		.pfn		= __phys_to_pfn(IXP2000_PCI_CSR_PHYS_BASE),
-		.length		= IXP2000_PCI_CSR_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IXP2000_MSF_VIRT_BASE,
-		.pfn		= __phys_to_pfn(IXP2000_MSF_PHYS_BASE),
-		.length		= IXP2000_MSF_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IXP2000_SCRATCH_RING_VIRT_BASE,
-		.pfn		= __phys_to_pfn(IXP2000_SCRATCH_RING_PHYS_BASE),
-		.length		= IXP2000_SCRATCH_RING_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IXP2000_SRAM0_VIRT_BASE,
-		.pfn		= __phys_to_pfn(IXP2000_SRAM0_PHYS_BASE),
-		.length		= IXP2000_SRAM0_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IXP2000_PCI_IO_VIRT_BASE,
-		.pfn		= __phys_to_pfn(IXP2000_PCI_IO_PHYS_BASE),
-		.length		= IXP2000_PCI_IO_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IXP2000_PCI_CFG0_VIRT_BASE,
-		.pfn		= __phys_to_pfn(IXP2000_PCI_CFG0_PHYS_BASE),
-		.length		= IXP2000_PCI_CFG0_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IXP2000_PCI_CFG1_VIRT_BASE,
-		.pfn		= __phys_to_pfn(IXP2000_PCI_CFG1_PHYS_BASE),
-		.length		= IXP2000_PCI_CFG1_SIZE,
-		.type		= MT_DEVICE,
-	}
-};
-
-void __init ixp2000_map_io(void)
-{
-	iotable_init(ixp2000_io_desc, ARRAY_SIZE(ixp2000_io_desc));
-
-	/* Set slowport to 8-bit mode.  */
-	ixp2000_reg_wrb(IXP2000_SLOWPORT_FRM, 1);
-}
-
-
-/*************************************************************************
- * Serial port support for IXP2000
- *************************************************************************/
-static struct plat_serial8250_port ixp2000_serial_port[] = {
-	{
-		.mapbase	= IXP2000_UART_PHYS_BASE,
-		.membase	= (char *)(IXP2000_UART_VIRT_BASE + 3),
-		.irq		= IRQ_IXP2000_UART,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= 50000000,
-	},
-	{ },
-};
-
-static struct resource ixp2000_uart_resource = {
-	.start		= IXP2000_UART_PHYS_BASE,
-	.end		= IXP2000_UART_PHYS_BASE + 0x1f,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device ixp2000_serial_device = {
-	.name		= "serial8250",
-	.id		= PLAT8250_DEV_PLATFORM,
-	.dev		= {
-		.platform_data		= ixp2000_serial_port,
-	},
-	.num_resources	= 1,
-	.resource	= &ixp2000_uart_resource,
-};
-
-void __init ixp2000_uart_init(void)
-{
-	platform_device_register(&ixp2000_serial_device);
-}
-
-
-/*************************************************************************
- * Timer-tick functions for IXP2000
- *************************************************************************/
-static unsigned ticks_per_jiffy;
-static unsigned ticks_per_usec;
-static unsigned next_jiffy_time;
-static volatile unsigned long *missing_jiffy_timer_csr;
-
-unsigned long ixp2000_gettimeoffset (void)
-{
- 	unsigned long offset;
-
-	offset = next_jiffy_time - *missing_jiffy_timer_csr;
-
-	return offset / ticks_per_usec;
-}
-
-static irqreturn_t ixp2000_timer_interrupt(int irq, void *dev_id)
-{
-	/* clear timer 1 */
-	ixp2000_reg_wrb(IXP2000_T1_CLR, 1);
-
-	while ((signed long)(next_jiffy_time - *missing_jiffy_timer_csr)
-							>= ticks_per_jiffy) {
-		timer_tick();
-		next_jiffy_time -= ticks_per_jiffy;
-	}
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction ixp2000_timer_irq = {
-	.name		= "IXP2000 Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= ixp2000_timer_interrupt,
-};
-
-void __init ixp2000_init_time(unsigned long tick_rate)
-{
-	ticks_per_jiffy = (tick_rate + HZ/2) / HZ;
-	ticks_per_usec = tick_rate / 1000000;
-
-	/*
-	 * We use timer 1 as our timer interrupt.
-	 */
-	ixp2000_reg_write(IXP2000_T1_CLR, 0);
-	ixp2000_reg_write(IXP2000_T1_CLD, ticks_per_jiffy - 1);
-	ixp2000_reg_write(IXP2000_T1_CTL, (1 << 7));
-
-	/*
-	 * We use a second timer as a monotonic counter for tracking
-	 * missed jiffies.  The IXP2000 has four timers, but if we're
-	 * on an A-step IXP2800, timer 2 and 3 don't work, so on those
-	 * chips we use timer 4.  Timer 4 is the only timer that can
-	 * be used for the watchdog, so we use timer 2 if we're on a
-	 * non-buggy chip.
-	 */
-	if ((*IXP2000_PRODUCT_ID & 0x001ffef0) == 0x00000000) {
-		printk(KERN_INFO "Enabling IXP2800 erratum #25 workaround\n");
-
-		ixp2000_reg_write(IXP2000_T4_CLR, 0);
-		ixp2000_reg_write(IXP2000_T4_CLD, -1);
-		ixp2000_reg_wrb(IXP2000_T4_CTL, (1 << 7));
-		missing_jiffy_timer_csr = IXP2000_T4_CSR;
-	} else {
-		ixp2000_reg_write(IXP2000_T2_CLR, 0);
-		ixp2000_reg_write(IXP2000_T2_CLD, -1);
-		ixp2000_reg_wrb(IXP2000_T2_CTL, (1 << 7));
-		missing_jiffy_timer_csr = IXP2000_T2_CSR;
-	}
- 	next_jiffy_time = 0xffffffff;
-
-	/* register for interrupt */
-	setup_irq(IRQ_IXP2000_TIMER1, &ixp2000_timer_irq);
-}
-
-/*************************************************************************
- * GPIO helpers
- *************************************************************************/
-static unsigned long GPIO_IRQ_falling_edge;
-static unsigned long GPIO_IRQ_rising_edge;
-static unsigned long GPIO_IRQ_level_low;
-static unsigned long GPIO_IRQ_level_high;
-
-static void update_gpio_int_csrs(void)
-{
-	ixp2000_reg_write(IXP2000_GPIO_FEDR, GPIO_IRQ_falling_edge);
-	ixp2000_reg_write(IXP2000_GPIO_REDR, GPIO_IRQ_rising_edge);
-	ixp2000_reg_write(IXP2000_GPIO_LSLR, GPIO_IRQ_level_low);
-	ixp2000_reg_wrb(IXP2000_GPIO_LSHR, GPIO_IRQ_level_high);
-}
-
-void gpio_line_config(int line, int direction)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	if (direction == GPIO_OUT) {
-		/* if it's an output, it ain't an interrupt anymore */
-		GPIO_IRQ_falling_edge &= ~(1 << line);
-		GPIO_IRQ_rising_edge &= ~(1 << line);
-		GPIO_IRQ_level_low &= ~(1 << line);
-		GPIO_IRQ_level_high &= ~(1 << line);
-		update_gpio_int_csrs();
-
-		ixp2000_reg_wrb(IXP2000_GPIO_PDSR, 1 << line);
-	} else if (direction == GPIO_IN) {
-		ixp2000_reg_wrb(IXP2000_GPIO_PDCR, 1 << line);
-	}
-	local_irq_restore(flags);
-}
-EXPORT_SYMBOL(gpio_line_config);
-
-
-/*************************************************************************
- * IRQ handling IXP2000
- *************************************************************************/
-static void ixp2000_GPIO_irq_handler(unsigned int irq, struct irq_desc *desc)
-{                               
-	int i;
-	unsigned long status = *IXP2000_GPIO_INST;
-		   
-	for (i = 0; i <= 7; i++) {
-		if (status & (1<<i)) {
-			generic_handle_irq(i + IRQ_IXP2000_GPIO0);
-		}
-	}
-}
-
-static int ixp2000_GPIO_irq_type(struct irq_data *d, unsigned int type)
-{
-	int line = d->irq - IRQ_IXP2000_GPIO0;
-
-	/*
-	 * First, configure this GPIO line as an input.
-	 */
-	ixp2000_reg_write(IXP2000_GPIO_PDCR, 1 << line);
-
-	/*
-	 * Then, set the proper trigger type.
-	 */
-	if (type & IRQ_TYPE_EDGE_FALLING)
-		GPIO_IRQ_falling_edge |= 1 << line;
-	else
-		GPIO_IRQ_falling_edge &= ~(1 << line);
-	if (type & IRQ_TYPE_EDGE_RISING)
-		GPIO_IRQ_rising_edge |= 1 << line;
-	else
-		GPIO_IRQ_rising_edge &= ~(1 << line);
-	if (type & IRQ_TYPE_LEVEL_LOW)
-		GPIO_IRQ_level_low |= 1 << line;
-	else
-		GPIO_IRQ_level_low &= ~(1 << line);
-	if (type & IRQ_TYPE_LEVEL_HIGH)
-		GPIO_IRQ_level_high |= 1 << line;
-	else
-		GPIO_IRQ_level_high &= ~(1 << line);
-	update_gpio_int_csrs();
-
-	return 0;
-}
-
-static void ixp2000_GPIO_irq_mask_ack(struct irq_data *d)
-{
-	unsigned int irq = d->irq;
-
-	ixp2000_reg_write(IXP2000_GPIO_INCR, (1 << (irq - IRQ_IXP2000_GPIO0)));
-
-	ixp2000_reg_write(IXP2000_GPIO_EDSR, (1 << (irq - IRQ_IXP2000_GPIO0)));
-	ixp2000_reg_write(IXP2000_GPIO_LDSR, (1 << (irq - IRQ_IXP2000_GPIO0)));
-	ixp2000_reg_wrb(IXP2000_GPIO_INST, (1 << (irq - IRQ_IXP2000_GPIO0)));
-}
-
-static void ixp2000_GPIO_irq_mask(struct irq_data *d)
-{
-	unsigned int irq = d->irq;
-
-	ixp2000_reg_wrb(IXP2000_GPIO_INCR, (1 << (irq - IRQ_IXP2000_GPIO0)));
-}
-
-static void ixp2000_GPIO_irq_unmask(struct irq_data *d)
-{
-	unsigned int irq = d->irq;
-
-	ixp2000_reg_write(IXP2000_GPIO_INSR, (1 << (irq - IRQ_IXP2000_GPIO0)));
-}
-
-static struct irq_chip ixp2000_GPIO_irq_chip = {
-	.irq_ack	= ixp2000_GPIO_irq_mask_ack,
-	.irq_mask	= ixp2000_GPIO_irq_mask,
-	.irq_unmask	= ixp2000_GPIO_irq_unmask,
-	.irq_set_type	= ixp2000_GPIO_irq_type,
-};
-
-static void ixp2000_pci_irq_mask(struct irq_data *d)
-{
-	unsigned long temp = *IXP2000_PCI_XSCALE_INT_ENABLE;
-	if (d->irq == IRQ_IXP2000_PCIA)
-		ixp2000_reg_wrb(IXP2000_PCI_XSCALE_INT_ENABLE, (temp & ~(1 << 26)));
-	else if (d->irq == IRQ_IXP2000_PCIB)
-		ixp2000_reg_wrb(IXP2000_PCI_XSCALE_INT_ENABLE, (temp & ~(1 << 27)));
-}
-
-static void ixp2000_pci_irq_unmask(struct irq_data *d)
-{
-	unsigned long temp = *IXP2000_PCI_XSCALE_INT_ENABLE;
-	if (d->irq == IRQ_IXP2000_PCIA)
-		ixp2000_reg_write(IXP2000_PCI_XSCALE_INT_ENABLE, (temp | (1 << 26)));
-	else if (d->irq == IRQ_IXP2000_PCIB)
-		ixp2000_reg_write(IXP2000_PCI_XSCALE_INT_ENABLE, (temp | (1 << 27)));
-}
-
-/*
- * Error interrupts. These are used extensively by the microengine drivers
- */
-static void ixp2000_err_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
-	int i;
-	unsigned long status = *IXP2000_IRQ_ERR_STATUS;
-
-	for(i = 31; i >= 0; i--) {
-		if(status & (1 << i)) {
-			generic_handle_irq(IRQ_IXP2000_DRAM0_MIN_ERR + i);
-		}
-	}
-}
-
-static void ixp2000_err_irq_mask(struct irq_data *d)
-{
-	ixp2000_reg_write(IXP2000_IRQ_ERR_ENABLE_CLR,
-			(1 << (d->irq - IRQ_IXP2000_DRAM0_MIN_ERR)));
-}
-
-static void ixp2000_err_irq_unmask(struct irq_data *d)
-{
-	ixp2000_reg_write(IXP2000_IRQ_ERR_ENABLE_SET,
-			(1 << (d->irq - IRQ_IXP2000_DRAM0_MIN_ERR)));
-}
-
-static struct irq_chip ixp2000_err_irq_chip = {
-	.irq_ack	= ixp2000_err_irq_mask,
-	.irq_mask	= ixp2000_err_irq_mask,
-	.irq_unmask	= ixp2000_err_irq_unmask
-};
-
-static struct irq_chip ixp2000_pci_irq_chip = {
-	.irq_ack	= ixp2000_pci_irq_mask,
-	.irq_mask	= ixp2000_pci_irq_mask,
-	.irq_unmask	= ixp2000_pci_irq_unmask
-};
-
-static void ixp2000_irq_mask(struct irq_data *d)
-{
-	ixp2000_reg_wrb(IXP2000_IRQ_ENABLE_CLR, (1 << d->irq));
-}
-
-static void ixp2000_irq_unmask(struct irq_data *d)
-{
-	ixp2000_reg_write(IXP2000_IRQ_ENABLE_SET, (1 << d->irq));
-}
-
-static struct irq_chip ixp2000_irq_chip = {
-	.irq_ack	= ixp2000_irq_mask,
-	.irq_mask	= ixp2000_irq_mask,
-	.irq_unmask	= ixp2000_irq_unmask
-};
-
-void __init ixp2000_init_irq(void)
-{
-	int irq;
-
-	/*
-	 * Mask all sources
-	 */
-	ixp2000_reg_write(IXP2000_IRQ_ENABLE_CLR, 0xffffffff);
-	ixp2000_reg_write(IXP2000_FIQ_ENABLE_CLR, 0xffffffff);
-
-	/* clear all GPIO edge/level detects */
-	ixp2000_reg_write(IXP2000_GPIO_REDR, 0);
-	ixp2000_reg_write(IXP2000_GPIO_FEDR, 0);
-	ixp2000_reg_write(IXP2000_GPIO_LSHR, 0);
-	ixp2000_reg_write(IXP2000_GPIO_LSLR, 0);
-	ixp2000_reg_write(IXP2000_GPIO_INCR, -1);
-
-	/* clear PCI interrupt sources */
-	ixp2000_reg_wrb(IXP2000_PCI_XSCALE_INT_ENABLE, 0);
-
-	/*
-	 * Certain bits in the IRQ status register of the 
-	 * IXP2000 are reserved. Instead of trying to map
-	 * things non 1:1 from bit position to IRQ number,
-	 * we mark the reserved IRQs as invalid. This makes
-	 * our mask/unmask code much simpler.
-	 */
-	for (irq = IRQ_IXP2000_SOFT_INT; irq <= IRQ_IXP2000_THDB3; irq++) {
-		if ((1 << irq) & IXP2000_VALID_IRQ_MASK) {
-			irq_set_chip_and_handler(irq, &ixp2000_irq_chip,
-						 handle_level_irq);
-			set_irq_flags(irq, IRQF_VALID);
-		} else set_irq_flags(irq, 0);
-	}
-
-	for (irq = IRQ_IXP2000_DRAM0_MIN_ERR; irq <= IRQ_IXP2000_SP_INT; irq++) {
-		if((1 << (irq - IRQ_IXP2000_DRAM0_MIN_ERR)) &
-				IXP2000_VALID_ERR_IRQ_MASK) {
-			irq_set_chip_and_handler(irq, &ixp2000_err_irq_chip,
-						 handle_level_irq);
-			set_irq_flags(irq, IRQF_VALID);
-		}
-		else
-			set_irq_flags(irq, 0);
-	}
-	irq_set_chained_handler(IRQ_IXP2000_ERRSUM, ixp2000_err_irq_handler);
-
-	for (irq = IRQ_IXP2000_GPIO0; irq <= IRQ_IXP2000_GPIO7; irq++) {
-		irq_set_chip_and_handler(irq, &ixp2000_GPIO_irq_chip,
-					 handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID);
-	}
-	irq_set_chained_handler(IRQ_IXP2000_GPIO, ixp2000_GPIO_irq_handler);
-
-	/*
-	 * Enable PCI irqs.  The actual PCI[AB] decoding is done in
-	 * entry-macro.S, so we don't need a chained handler for the
-	 * PCI interrupt source.
-	 */
-	ixp2000_reg_write(IXP2000_IRQ_ENABLE_SET, (1 << IRQ_IXP2000_PCI));
-	for (irq = IRQ_IXP2000_PCIA; irq <= IRQ_IXP2000_PCIB; irq++) {
-		irq_set_chip_and_handler(irq, &ixp2000_pci_irq_chip,
-					 handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID);
-	}
-}
-
-void ixp2000_restart(char mode, const char *cmd)
-{
-	ixp2000_reg_wrb(IXP2000_RESET0, RSTALL);
-}
diff --git a/arch/arm/mach-ixp2000/enp2611.c b/arch/arm/mach-ixp2000/enp2611.c
deleted file mode 100644
index 4867f408617c..000000000000
--- a/arch/arm/mach-ixp2000/enp2611.c
+++ /dev/null
@@ -1,265 +0,0 @@
-/*
- * arch/arm/mach-ixp2000/enp2611.c
- *
- * Radisys ENP-2611 support.
- *
- * Created 2004 by Lennert Buytenhek from the ixdp2x01 code.  The
- * original version carries the following notices:
- *
- * Original Author: Andrzej Mialkowski <andrzej.mialkowski@intel.com>
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002-2003 Intel Corp.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/bitops.h>
-#include <linux/pci.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/pci.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-
-/*************************************************************************
- * ENP-2611 timer tick configuration
- *************************************************************************/
-static void __init enp2611_timer_init(void)
-{
-	ixp2000_init_time(50 * 1000 * 1000);
-}
-
-static struct sys_timer enp2611_timer = {
-	.init		= enp2611_timer_init,
-	.offset		= ixp2000_gettimeoffset,
-};
-
-
-/*************************************************************************
- * ENP-2611 I/O
- *************************************************************************/
-static struct map_desc enp2611_io_desc[] __initdata = {
-	{
-		.virtual	= ENP2611_CALEB_VIRT_BASE,
-		.pfn		= __phys_to_pfn(ENP2611_CALEB_PHYS_BASE),
-		.length		= ENP2611_CALEB_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= ENP2611_PM3386_0_VIRT_BASE,
-		.pfn		= __phys_to_pfn(ENP2611_PM3386_0_PHYS_BASE),
-		.length		= ENP2611_PM3386_0_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= ENP2611_PM3386_1_VIRT_BASE,
-		.pfn		= __phys_to_pfn(ENP2611_PM3386_1_PHYS_BASE),
-		.length		= ENP2611_PM3386_1_SIZE,
-		.type		= MT_DEVICE,
-	}
-};
-
-void __init enp2611_map_io(void)
-{
-	ixp2000_map_io();
-	iotable_init(enp2611_io_desc, ARRAY_SIZE(enp2611_io_desc));
-}
-
-
-/*************************************************************************
- * ENP-2611 PCI
- *************************************************************************/
-static int enp2611_pci_setup(int nr, struct pci_sys_data *sys)
-{
-	sys->mem_offset = 0xe0000000;
-	ixp2000_pci_setup(nr, sys);
-	return 1;
-}
-
-static void __init enp2611_pci_preinit(void)
-{
-	ixp2000_reg_write(IXP2000_PCI_ADDR_EXT, 0x00100000);
-	ixp2000_pci_preinit();
-	pcibios_setup("firmware");
-}
-
-static inline int enp2611_pci_valid_device(struct pci_bus *bus,
-						unsigned int devfn)
-{
-	/* The 82559 ethernet controller appears at both PCI:1:0:0 and
-	 * PCI:1:2:0, so let's pretend the second one isn't there.
-	 */
-	if (bus->number == 0x01 && devfn == 0x10)
-		return 0;
-
-	return 1;
-}
-
-static int enp2611_pci_read_config(struct pci_bus *bus, unsigned int devfn,
-					int where, int size, u32 *value)
-{
-	if (enp2611_pci_valid_device(bus, devfn))
-		return ixp2000_pci_read_config(bus, devfn, where, size, value);
-
-	return PCIBIOS_DEVICE_NOT_FOUND;
-}
-
-static int enp2611_pci_write_config(struct pci_bus *bus, unsigned int devfn,
-					int where, int size, u32 value)
-{
-	if (enp2611_pci_valid_device(bus, devfn))
-		return ixp2000_pci_write_config(bus, devfn, where, size, value);
-
-	return PCIBIOS_DEVICE_NOT_FOUND;
-}
-
-static struct pci_ops enp2611_pci_ops = {
-	.read   = enp2611_pci_read_config,
-	.write  = enp2611_pci_write_config
-};
-
-static struct pci_bus * __init enp2611_pci_scan_bus(int nr,
-						struct pci_sys_data *sys)
-{
-	return pci_scan_root_bus(NULL, sys->busnr, &enp2611_pci_ops, sys,
-				 &sys->resources);
-}
-
-static int __init enp2611_pci_map_irq(const struct pci_dev *dev, u8 slot,
-	u8 pin)
-{
-	int irq;
-
-	if (dev->bus->number == 0 && PCI_SLOT(dev->devfn) == 0) {
-		/* IXP2400. */
-		irq = IRQ_IXP2000_PCIA;
-	} else if (dev->bus->number == 0 && PCI_SLOT(dev->devfn) == 1) {
-		/* 21555 non-transparent bridge.  */
-		irq = IRQ_IXP2000_PCIB;
-	} else if (dev->bus->number == 0 && PCI_SLOT(dev->devfn) == 4) {
-		/* PCI2050B transparent bridge.  */
-		irq = -1;
-	} else if (dev->bus->number == 1 && PCI_SLOT(dev->devfn) == 0) {
-		/* 82559 ethernet.  */
-		irq = IRQ_IXP2000_PCIA;
-	} else if (dev->bus->number == 1 && PCI_SLOT(dev->devfn) == 1) {
-		/* SPI-3 option board.  */
-		irq = IRQ_IXP2000_PCIB;
-	} else {
-		printk(KERN_ERR "enp2611_pci_map_irq() called for unknown "
-				"device PCI:%d:%d:%d\n", dev->bus->number,
-				PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
-		irq = -1;
-	}
-
-	return irq;
-}
-
-struct hw_pci enp2611_pci __initdata = {
-	.nr_controllers	= 1,
-	.setup		= enp2611_pci_setup,
-	.preinit	= enp2611_pci_preinit,
-	.scan		= enp2611_pci_scan_bus,
-	.map_irq	= enp2611_pci_map_irq,
-};
-
-int __init enp2611_pci_init(void)
-{
-	if (machine_is_enp2611())
-		pci_common_init(&enp2611_pci);
-
-	return 0;
-}
-
-subsys_initcall(enp2611_pci_init);
-
-
-/*************************************************************************
- * ENP-2611 Machine Initialization
- *************************************************************************/
-static struct flash_platform_data enp2611_flash_platform_data = {
-	.map_name	= "cfi_probe",
-	.width		= 1,
-};
-
-static struct ixp2000_flash_data enp2611_flash_data = {
-	.platform_data	= &enp2611_flash_platform_data,
-	.nr_banks	= 1
-};
-
-static struct resource enp2611_flash_resource = {
-	.start		= 0xc4000000,
-	.end		= 0xc4000000 + 0x00ffffff,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device enp2611_flash = {
-	.name		= "IXP2000-Flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &enp2611_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &enp2611_flash_resource,
-};
-
-static struct ixp2000_i2c_pins enp2611_i2c_gpio_pins = {
-	.sda_pin	= ENP2611_GPIO_SDA,
-	.scl_pin	= ENP2611_GPIO_SCL,
-};
-
-static struct platform_device enp2611_i2c_controller = {
-	.name		= "IXP2000-I2C",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &enp2611_i2c_gpio_pins
-	},
-	.num_resources	= 0
-};
-
-static struct platform_device *enp2611_devices[] __initdata = {
-	&enp2611_flash,
-	&enp2611_i2c_controller
-};
-
-static void __init enp2611_init_machine(void)
-{
-	platform_add_devices(enp2611_devices, ARRAY_SIZE(enp2611_devices));
-	ixp2000_uart_init();
-}
-
-
-MACHINE_START(ENP2611, "Radisys ENP-2611 PCI network processor board")
-	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.atag_offset	= 0x100,
-	.map_io		= enp2611_map_io,
-	.init_irq	= ixp2000_init_irq,
-	.timer		= &enp2611_timer,
-	.init_machine	= enp2611_init_machine,
-	.restart	= ixp2000_restart,
-MACHINE_END
-
-
diff --git a/arch/arm/mach-ixp2000/include/mach/debug-macro.S b/arch/arm/mach-ixp2000/include/mach/debug-macro.S
deleted file mode 100644
index bdd3ccdc2890..000000000000
--- a/arch/arm/mach-ixp2000/include/mach/debug-macro.S
+++ /dev/null
@@ -1,25 +0,0 @@
-/* arch/arm/mach-ixp2000/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.macro  addruart, rp, rv, tmp
-		mov	\rp, #0x00030000
-#ifdef	__ARMEB__
-		orr	\rp, \rp, #0x00000003
-#endif
-		orr	\rv, \rp, #0xfe000000	@ virtual base
-		orr	\rv, \rv, #0x00f00000
-		orr	\rp, \rp, #0xc0000000	@ Physical base
-		.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-ixp2000/include/mach/enp2611.h b/arch/arm/mach-ixp2000/include/mach/enp2611.h
deleted file mode 100644
index 9ce3690061d5..000000000000
--- a/arch/arm/mach-ixp2000/include/mach/enp2611.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * arch/arm/mach-ixp2000/include/mach/enp2611.h
- *
- * Register and other defines for Radisys ENP-2611
- *
- * Created 2004 by Lennert Buytenhek from the ixdp2x01 code.  The
- * original version carries the following notices:
- *
- * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002 Intel Corp.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-
-#ifndef __ENP2611_H
-#define __ENP2611_H
-
-#define ENP2611_CALEB_PHYS_BASE		0xc5000000
-#define ENP2611_CALEB_VIRT_BASE		0xfe000000
-#define ENP2611_CALEB_SIZE		0x00100000
-
-#define ENP2611_PM3386_0_PHYS_BASE	0xc6000000
-#define ENP2611_PM3386_0_VIRT_BASE	0xfe100000
-#define ENP2611_PM3386_0_SIZE		0x00100000
-
-#define ENP2611_PM3386_1_PHYS_BASE	0xc6400000
-#define ENP2611_PM3386_1_VIRT_BASE	0xfe200000
-#define ENP2611_PM3386_1_SIZE		0x00100000
-
-#define ENP2611_GPIO_SCL		7
-#define ENP2611_GPIO_SDA		6
-
-#define IRQ_ENP2611_THERMAL		IRQ_IXP2000_GPIO4
-#define IRQ_ENP2611_OPTION_BOARD	IRQ_IXP2000_GPIO3
-#define IRQ_ENP2611_CALEB		IRQ_IXP2000_GPIO2
-#define IRQ_ENP2611_PM3386_1		IRQ_IXP2000_GPIO1
-#define IRQ_ENP2611_PM3386_0		IRQ_IXP2000_GPIO0
-
-
-#endif
diff --git a/arch/arm/mach-ixp2000/include/mach/entry-macro.S b/arch/arm/mach-ixp2000/include/mach/entry-macro.S
deleted file mode 100644
index c4444dff9202..000000000000
--- a/arch/arm/mach-ixp2000/include/mach/entry-macro.S
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * arch/arm/mach-ixp2000/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for IXP2000-based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <mach/irqs.h>
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-
-		mov	\irqnr, #0x0              @clear out irqnr as default
-                mov	\base, #0xfe000000
-		orr	\base, \base, #0x00e00000
-		orr	\base, \base, #0x08
-		ldr	\irqstat, [\base]         @ get interrupts
-
-		cmp	\irqstat, #0
-		beq	1001f
-
-		clz     \irqnr, \irqstat
-		mov     \base, #31
-		subs    \irqnr, \base, \irqnr
-
-		/*
-		 * We handle PCIA and PCIB here so we don't have an
-		 * extra layer of code just to check these two bits.
-		 */
-		cmp	\irqnr, #IRQ_IXP2000_PCI
-		bne	1001f
-
-		mov	\base, #0xfe000000
-		orr	\base, \base, #0x00c00000
-		orr	\base, \base, #0x00000100
-		orr	\base, \base, #0x00000058
-		ldr	\irqstat, [\base]
-
-		mov	\tmp, #(1<<26)
-		tst	\irqstat, \tmp
-		movne	\irqnr, #IRQ_IXP2000_PCIA
-		bne	1001f
-
-		mov	\tmp, #(1<<27)
-		tst	\irqstat, \tmp
-		movne	\irqnr, #IRQ_IXP2000_PCIB
-
-1001:
-		.endm
-
diff --git a/arch/arm/mach-ixp2000/include/mach/gpio-ixp2000.h b/arch/arm/mach-ixp2000/include/mach/gpio-ixp2000.h
deleted file mode 100644
index af836c76c3f1..000000000000
--- a/arch/arm/mach-ixp2000/include/mach/gpio-ixp2000.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * arch/arm/mach-ixp2000/include/mach/gpio.h
- *
- * Copyright (C) 2002 Intel Corporation.
- *
- * This program is free software, you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * IXP2000 GPIO in/out, edge/level detection for IRQs:
- * IRQs are generated on Falling-edge, Rising-Edge, Level-low, Level-High
- * or both Falling-edge and Rising-edge.
- * This must be called *before* the corresponding IRQ is registerd.
- * Use this instead of directly setting the GPIO registers.
- * GPIOs may also be used as GPIOs (e.g. for emulating i2c/smb)
- */
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H
-
-#ifndef __ASSEMBLY__
-
-#define GPIO_IN				0
-#define GPIO_OUT			1
-
-#define IXP2000_GPIO_LOW		0
-#define IXP2000_GPIO_HIGH		1
-
-extern void gpio_line_config(int line, int direction);
-
-static inline int gpio_line_get(int line)
-{
-	return (((*IXP2000_GPIO_PLR) >> line) & 1);
-}
-
-static inline void gpio_line_set(int line, int value)
-{
-	if (value == IXP2000_GPIO_HIGH) {
-		ixp2000_reg_write(IXP2000_GPIO_POSR, 1 << line);
-	} else if (value == IXP2000_GPIO_LOW) {
-		ixp2000_reg_write(IXP2000_GPIO_POCR, 1 << line);
-	}
-}
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* ASM_ARCH_IXP2000_GPIO_H_ */
diff --git a/arch/arm/mach-ixp2000/include/mach/hardware.h b/arch/arm/mach-ixp2000/include/mach/hardware.h
deleted file mode 100644
index cdaf1db84003..000000000000
--- a/arch/arm/mach-ixp2000/include/mach/hardware.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * arch/arm/mach-ixp2000/include/mach/hardware.h
- *
- * Hardware definitions for IXP2400/2800 based systems
- *
- * Original Author: Naeem M Afzal <naeem.m.afzal@intel.com>
- *
- * Maintainer: Deepak Saxena <dsaxena@mvista.com>
- *
- * Copyright (C) 2001-2002 Intel Corp.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#define __ASM_ARCH_HARDWARE_H__
-
-#include "ixp2000-regs.h"	/* Chipset Registers */
-
-/*
- * Platform helper functions
- */
-#include "platform.h"
-
-/*
- * Platform-specific bits
- */
-#include "enp2611.h"		/* ENP-2611 */
-#include "ixdp2x00.h"		/* IXDP2400/2800 */
-#include "ixdp2x01.h"		/* IXDP2401/2801 */
-
-#endif  /* _ASM_ARCH_HARDWARE_H__ */
diff --git a/arch/arm/mach-ixp2000/include/mach/io.h b/arch/arm/mach-ixp2000/include/mach/io.h
deleted file mode 100644
index f6552d6f35ab..000000000000
--- a/arch/arm/mach-ixp2000/include/mach/io.h
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * arch/arm/mach-ixp2000/include/mach/io.h
- *
- * Original Author: Naeem M Afzal <naeem.m.afzal@intel.com>
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002  Intel Corp.
- * Copyrgiht (C) 2003-2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <mach/hardware.h>
-
-#define IO_SPACE_LIMIT		0xffffffff
-
-/*
- * The A? revisions of the IXP2000s assert byte lanes for PCI I/O
- * transactions the other way round (MEM transactions don't have this
- * issue), so if we want to support those models, we need to override
- * the standard I/O functions.
- *
- * B0 and later have a bit that can be set to 1 to get the proper
- * behavior for I/O transactions, which then allows us to use the
- * standard I/O functions.  This is what we do if the user does not
- * explicitly ask for support for pre-B0.
- */
-#ifdef CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO
-#define ___io(p)		((void __iomem *)((p)+IXP2000_PCI_IO_VIRT_BASE))
-
-#define alignb(addr)		(void __iomem *)((unsigned long)(addr) ^ 3)
-#define alignw(addr)		(void __iomem *)((unsigned long)(addr) ^ 2)
-
-#define outb(v,p)		__raw_writeb((v),alignb(___io(p)))
-#define outw(v,p)		__raw_writew((v),alignw(___io(p)))
-#define outl(v,p)		__raw_writel((v),___io(p))
-
-#define inb(p)		({ unsigned int __v = __raw_readb(alignb(___io(p))); __v; })
-#define inw(p)		\
-	({ unsigned int __v = (__raw_readw(alignw(___io(p)))); __v; })
-#define inl(p)		\
-	({ unsigned int __v = (__raw_readl(___io(p))); __v; })
-
-#define outsb(p,d,l)		__raw_writesb(alignb(___io(p)),d,l)
-#define outsw(p,d,l)		__raw_writesw(alignw(___io(p)),d,l)
-#define outsl(p,d,l)		__raw_writesl(___io(p),d,l)
-
-#define insb(p,d,l)		__raw_readsb(alignb(___io(p)),d,l)
-#define insw(p,d,l)		__raw_readsw(alignw(___io(p)),d,l)
-#define insl(p,d,l)		__raw_readsl(___io(p),d,l)
-
-#define __is_io_address(p)	((((unsigned long)(p)) & ~(IXP2000_PCI_IO_SIZE - 1)) == IXP2000_PCI_IO_VIRT_BASE)
-
-#define ioread8(p)						\
-	({							\
-		unsigned int __v;				\
-								\
-		if (__is_io_address(p)) {			\
-			__v = __raw_readb(alignb(p));		\
-		} else {					\
-			__v = __raw_readb(p);			\
-		}						\
-								\
-		__v;						\
-	})							\
-
-#define ioread16(p)						\
-	({							\
-		unsigned int __v;				\
-								\
-		if (__is_io_address(p)) {			\
-			__v = __raw_readw(alignw(p));		\
-		} else {					\
-			__v = le16_to_cpu(__raw_readw(p));	\
-		}						\
-								\
-		__v;						\
-	})
-
-#define ioread32(p)						\
-	({							\
-		unsigned int __v;				\
-								\
-		if (__is_io_address(p)) {			\
-			__v = __raw_readl(p);			\
-		} else {					\
-			__v = le32_to_cpu(__raw_readl(p));	\
-		}						\
-								\
-		 __v;						\
-	})
-
-#define iowrite8(v,p)						\
-	({							\
-		if (__is_io_address(p)) {			\
-			__raw_writeb((v), alignb(p));		\
-		} else {					\
-			__raw_writeb((v), p);			\
-		}						\
-	})
-
-#define iowrite16(v,p)						\
-	({							\
-		if (__is_io_address(p)) {			\
-			__raw_writew((v), alignw(p));		\
-		} else {					\
-			__raw_writew(cpu_to_le16(v), p);	\
-		}						\
-	})
-
-#define iowrite32(v,p)						\
-	({							\
-		if (__is_io_address(p)) {			\
-			__raw_writel((v), p);			\
-		} else {					\
-			__raw_writel(cpu_to_le32(v), p);	\
-		}						\
-	})
-
-#define ioport_map(port, nr)	___io(port)
-
-#define ioport_unmap(addr)
-#else
-#define __io(p)			((void __iomem *)((p)+IXP2000_PCI_IO_VIRT_BASE))
-#endif
-
-
-#endif
diff --git a/arch/arm/mach-ixp2000/include/mach/irqs.h b/arch/arm/mach-ixp2000/include/mach/irqs.h
deleted file mode 100644
index bee96bcafdca..000000000000
--- a/arch/arm/mach-ixp2000/include/mach/irqs.h
+++ /dev/null
@@ -1,207 +0,0 @@
-/*
- * arch/arm/mach-ixp2000/include/mach/irqs.h
- *
- * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002 Intel Corp.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- * 
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _IRQS_H
-#define _IRQS_H
-
-/*
- * Do NOT add #ifdef MACHINE_FOO in here.
- * Simpy add your machine IRQs here and increase NR_IRQS if needed to
- * hold your machine's IRQ table.
- */
-
-/*
- * Some interrupt numbers go unused b/c the IRQ mask/ummask/status
- * register has those bit reserved. We just mark those interrupts
- * as invalid and this allows us to do mask/unmask with a single
- * shift operation instead of having to map the IRQ number to
- * a HW IRQ number.
- */
-#define	IRQ_IXP2000_SOFT_INT		0 /* soft interrupt */
-#define	IRQ_IXP2000_ERRSUM		1 /* OR of all bits in ErrorStatus reg*/
-#define	IRQ_IXP2000_UART		2
-#define	IRQ_IXP2000_GPIO		3
-#define	IRQ_IXP2000_TIMER1     		4
-#define	IRQ_IXP2000_TIMER2     		5
-#define	IRQ_IXP2000_TIMER3     		6
-#define	IRQ_IXP2000_TIMER4     		7
-#define	IRQ_IXP2000_PMU        		8               
-#define	IRQ_IXP2000_SPF        		9  /* Slow port framer IRQ */
-#define	IRQ_IXP2000_DMA1      		10
-#define	IRQ_IXP2000_DMA2      		11
-#define	IRQ_IXP2000_DMA3      		12
-#define	IRQ_IXP2000_PCI_DOORBELL	13
-#define	IRQ_IXP2000_ME_ATTN       	14 
-#define	IRQ_IXP2000_PCI   		15 /* PCI INTA or INTB */
-#define	IRQ_IXP2000_THDA0   		16 /* thread 0-31A */
-#define	IRQ_IXP2000_THDA1  		17 /* thread 32-63A, IXP2800 only */
-#define	IRQ_IXP2000_THDA2		18 /* thread 64-95A */
-#define	IRQ_IXP2000_THDA3 		19 /* thread 96-127A, IXP2800 only */
-#define	IRQ_IXP2000_THDB0		24 /* thread 0-31B */
-#define	IRQ_IXP2000_THDB1		25 /* thread 32-63B, IXP2800 only */
-#define	IRQ_IXP2000_THDB2		26 /* thread 64-95B */
-#define	IRQ_IXP2000_THDB3		27 /* thread 96-127B, IXP2800 only */
-
-/* define generic GPIOs */
-#define IRQ_IXP2000_GPIO0		32
-#define IRQ_IXP2000_GPIO1		33
-#define IRQ_IXP2000_GPIO2		34
-#define IRQ_IXP2000_GPIO3		35
-#define IRQ_IXP2000_GPIO4		36
-#define IRQ_IXP2000_GPIO5		37
-#define IRQ_IXP2000_GPIO6		38
-#define IRQ_IXP2000_GPIO7		39
-
-/* split off the 2 PCI sources */
-#define IRQ_IXP2000_PCIA		40
-#define IRQ_IXP2000_PCIB		41
-
-/* Int sources from IRQ_ERROR_STATUS */
-#define IRQ_IXP2000_DRAM0_MIN_ERR	42
-#define IRQ_IXP2000_DRAM0_MAJ_ERR	43
-#define IRQ_IXP2000_DRAM1_MIN_ERR	44
-#define IRQ_IXP2000_DRAM1_MAJ_ERR	45
-#define IRQ_IXP2000_DRAM2_MIN_ERR	46
-#define IRQ_IXP2000_DRAM2_MAJ_ERR	47
-/* 48-57 reserved */
-#define IRQ_IXP2000_SRAM0_ERR		58
-#define IRQ_IXP2000_SRAM1_ERR		59
-#define IRQ_IXP2000_SRAM2_ERR		60
-#define IRQ_IXP2000_SRAM3_ERR		61
-/* 62-65 reserved */
-#define IRQ_IXP2000_MEDIA_ERR		66
-#define IRQ_IXP2000_PCI_ERR			67
-#define IRQ_IXP2000_SP_INT			68
-
-#define NR_IXP2000_IRQS				69
-
-#define	IXP2000_BOARD_IRQ(x)		(NR_IXP2000_IRQS + (x))
-
-#define	IXP2000_BOARD_IRQ_MASK(irq)	(1 << (irq - NR_IXP2000_IRQS))	
-
-#define IXP2000_ERR_IRQ_MASK(irq) ( 1 << (irq - IRQ_IXP2000_DRAM0_MIN_ERR))
-#define IXP2000_VALID_ERR_IRQ_MASK (\
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM0_MIN_ERR) | \
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM0_MAJ_ERR) | \
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM1_MIN_ERR) | \
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM1_MAJ_ERR) | \
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM2_MIN_ERR) | \
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM2_MAJ_ERR) | \
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM0_ERR) | \
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM1_ERR) | \
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM2_ERR) | \
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM3_ERR) | \
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_MEDIA_ERR) | \
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_PCI_ERR) | \
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SP_INT)	)
-
-/*
- * This allows for all the on-chip sources plus up to 32 CPLD based
- * IRQs. Should be more than enough.
- */
-#define	IXP2000_BOARD_IRQS		32
-#define NR_IRQS				(NR_IXP2000_IRQS + IXP2000_BOARD_IRQS)
-
-
-/* 
- * IXDP2400 specific IRQs
- */
-#define	IRQ_IXDP2400_INGRESS_NPU	IXP2000_BOARD_IRQ(0) 
-#define	IRQ_IXDP2400_ENET		IXP2000_BOARD_IRQ(1) 
-#define	IRQ_IXDP2400_MEDIA_PCI		IXP2000_BOARD_IRQ(2) 
-#define	IRQ_IXDP2400_MEDIA_SP		IXP2000_BOARD_IRQ(3) 
-#define	IRQ_IXDP2400_SF_PCI		IXP2000_BOARD_IRQ(4) 
-#define	IRQ_IXDP2400_SF_SP		IXP2000_BOARD_IRQ(5) 
-#define	IRQ_IXDP2400_PMC		IXP2000_BOARD_IRQ(6) 
-#define	IRQ_IXDP2400_TVM		IXP2000_BOARD_IRQ(7) 
-
-#define	NR_IXDP2400_IRQS		((IRQ_IXDP2400_TVM)+1)  
-#define	IXDP2400_NR_IRQS		NR_IXDP2400_IRQS - NR_IXP2000_IRQS
-
-/* IXDP2800 specific IRQs */
-#define IRQ_IXDP2800_EGRESS_ENET	IXP2000_BOARD_IRQ(0)
-#define IRQ_IXDP2800_INGRESS_NPU	IXP2000_BOARD_IRQ(1)
-#define IRQ_IXDP2800_PMC		IXP2000_BOARD_IRQ(2)
-#define IRQ_IXDP2800_FABRIC_PCI		IXP2000_BOARD_IRQ(3)
-#define IRQ_IXDP2800_FABRIC		IXP2000_BOARD_IRQ(4)
-#define IRQ_IXDP2800_MEDIA		IXP2000_BOARD_IRQ(5)
-
-#define	NR_IXDP2800_IRQS		((IRQ_IXDP2800_MEDIA)+1)
-#define	IXDP2800_NR_IRQS		NR_IXDP2800_IRQS - NR_IXP2000_IRQS
-
-/* 
- * IRQs on both IXDP2x01 boards
- */
-#define IRQ_IXDP2X01_SPCI_DB_0		IXP2000_BOARD_IRQ(2)
-#define IRQ_IXDP2X01_SPCI_DB_1		IXP2000_BOARD_IRQ(3)
-#define IRQ_IXDP2X01_SPCI_PMC_INTA	IXP2000_BOARD_IRQ(4)
-#define IRQ_IXDP2X01_SPCI_PMC_INTB	IXP2000_BOARD_IRQ(5)
-#define IRQ_IXDP2X01_SPCI_PMC_INTC	IXP2000_BOARD_IRQ(6)
-#define IRQ_IXDP2X01_SPCI_PMC_INTD	IXP2000_BOARD_IRQ(7)
-#define IRQ_IXDP2X01_SPCI_FIC_INT	IXP2000_BOARD_IRQ(8)
-#define IRQ_IXDP2X01_IPMI_FROM		IXP2000_BOARD_IRQ(16)
-#define IRQ_IXDP2X01_125US		IXP2000_BOARD_IRQ(17)
-#define IRQ_IXDP2X01_DB_0_ADD		IXP2000_BOARD_IRQ(18)
-#define IRQ_IXDP2X01_DB_1_ADD		IXP2000_BOARD_IRQ(19)
-#define IRQ_IXDP2X01_UART1		IXP2000_BOARD_IRQ(21)
-#define IRQ_IXDP2X01_UART2		IXP2000_BOARD_IRQ(22)
-#define IRQ_IXDP2X01_FIC_ADD_INT	IXP2000_BOARD_IRQ(24)
-#define IRQ_IXDP2X01_CS8900		IXP2000_BOARD_IRQ(25)
-#define IRQ_IXDP2X01_BBSRAM		IXP2000_BOARD_IRQ(26)
-
-#define IXDP2X01_VALID_IRQ_MASK ( \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_DB_0) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_DB_1) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTA) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTB) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTC) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTD) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_FIC_INT) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_IPMI_FROM) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_125US) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_DB_0_ADD) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_DB_1_ADD) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_UART1) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_UART2) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_FIC_ADD_INT) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_CS8900) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_BBSRAM) )
-
-/* 
- * IXDP2401 specific IRQs
- */
-#define IRQ_IXDP2401_INTA_82546		IXP2000_BOARD_IRQ(0)
-#define IRQ_IXDP2401_INTB_82546		IXP2000_BOARD_IRQ(1)
-
-#define	IXDP2401_VALID_IRQ_MASK ( \
-		IXDP2X01_VALID_IRQ_MASK | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2401_INTA_82546) |\
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2401_INTB_82546))
-
-/*
- * IXDP2801-specific IRQs
- */
-#define IRQ_IXDP2801_RIV		IXP2000_BOARD_IRQ(0)
-#define IRQ_IXDP2801_CNFG_MEDIA		IXP2000_BOARD_IRQ(27)
-#define IRQ_IXDP2801_CLOCK_REF		IXP2000_BOARD_IRQ(28)
-
-#define	IXDP2801_VALID_IRQ_MASK ( \
-		IXDP2X01_VALID_IRQ_MASK | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2801_RIV) |\
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2801_CNFG_MEDIA) |\
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2801_CLOCK_REF))
-
-#define	NR_IXDP2X01_IRQS		((IRQ_IXDP2801_CLOCK_REF) + 1)
-
-#endif /*_IRQS_H*/
diff --git a/arch/arm/mach-ixp2000/include/mach/ixdp2x00.h b/arch/arm/mach-ixp2000/include/mach/ixdp2x00.h
deleted file mode 100644
index 5df8479d9481..000000000000
--- a/arch/arm/mach-ixp2000/include/mach/ixdp2x00.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * arch/arm/mach-ixp2000/include/mach/ixdp2x00.h
- *
- * Register and other defines for IXDP2[48]00 platforms
- *
- * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002 Intel Corp.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-#ifndef _IXDP2X00_H_
-#define _IXDP2X00_H_
-
-/*
- * On board CPLD memory map
- */
-#define IXDP2X00_PHYS_CPLD_BASE		0xc7000000
-#define IXDP2X00_VIRT_CPLD_BASE		0xfe000000
-#define IXDP2X00_CPLD_SIZE		0x00100000
-
-
-#define IXDP2X00_CPLD_REG(x)  	\
-	(volatile unsigned long *)(IXDP2X00_VIRT_CPLD_BASE | x)
-
-/*
- * IXDP2400 CPLD registers
- */
-#define IXDP2400_CPLD_SYSLED		IXDP2X00_CPLD_REG(0x0)  
-#define IXDP2400_CPLD_DISP_DATA		IXDP2X00_CPLD_REG(0x4)
-#define IXDP2400_CPLD_CLOCK_SPEED	IXDP2X00_CPLD_REG(0x8)
-#define IXDP2400_CPLD_INT_STAT		IXDP2X00_CPLD_REG(0xc)
-#define IXDP2400_CPLD_REV		IXDP2X00_CPLD_REG(0x10)
-#define IXDP2400_CPLD_SYS_CLK_M		IXDP2X00_CPLD_REG(0x14)
-#define IXDP2400_CPLD_SYS_CLK_N		IXDP2X00_CPLD_REG(0x18)
-#define IXDP2400_CPLD_INT_MASK		IXDP2X00_CPLD_REG(0x48)
-
-/*
- * IXDP2800 CPLD registers
- */
-#define IXDP2800_CPLD_INT_STAT		IXDP2X00_CPLD_REG(0x0)
-#define IXDP2800_CPLD_INT_MASK		IXDP2X00_CPLD_REG(0x140)
-
-
-#define	IXDP2X00_GPIO_I2C_ENABLE	0x02
-#define	IXDP2X00_GPIO_SCL		0x07
-#define	IXDP2X00_GPIO_SDA		0x06
-
-/*
- * PCI devfns for on-board devices. We need these to be able to
- * properly translate IRQs and for device removal.
- */
-#define	IXDP2400_SLAVE_ENET_DEVFN	0x18	/* Bus 1 */
-#define	IXDP2400_MASTER_ENET_DEVFN	0x20	/* Bus 1 */
-#define	IXDP2400_MEDIA_DEVFN		0x28	/* Bus 1 */
-#define	IXDP2400_SWITCH_FABRIC_DEVFN	0x30	/* Bus 1 */
-
-#define	IXDP2800_SLAVE_ENET_DEVFN	0x20	/* Bus 1 */
-#define	IXDP2800_MASTER_ENET_DEVFN	0x18	/* Bus 1 */
-#define	IXDP2800_SWITCH_FABRIC_DEVFN	0x30	/* Bus 1 */
-
-#define	IXDP2X00_P2P_DEVFN		0x20	/* Bus 0 */
-#define	IXDP2X00_21555_DEVFN		0x30	/* Bus 0 */
-#define IXDP2X00_SLAVE_NPU_DEVFN	0x28	/* Bus 1 */
-#define	IXDP2X00_PMC_DEVFN		0x38	/* Bus 1 */
-#define IXDP2X00_MASTER_NPU_DEVFN	0x38	/* Bus 1 */
-
-#ifndef __ASSEMBLY__
-/*
- * The master NPU is always PCI master.
- */
-static inline unsigned int ixdp2x00_master_npu(void)
-{
-	return !!ixp2000_is_pcimaster();
-}
-
-/*
- * Helper functions used by ixdp2400 and ixdp2800 specific code
- */
-void ixdp2x00_init_irq(volatile unsigned long*, volatile unsigned long *, unsigned long);
-void ixdp2x00_slave_pci_postinit(void);
-void ixdp2x00_init_machine(void);
-void ixdp2x00_map_io(void);
-
-#endif
-
-#endif /*_IXDP2X00_H_ */
diff --git a/arch/arm/mach-ixp2000/include/mach/ixdp2x01.h b/arch/arm/mach-ixp2000/include/mach/ixdp2x01.h
deleted file mode 100644
index 4c1f04083e54..000000000000
--- a/arch/arm/mach-ixp2000/include/mach/ixdp2x01.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * arch/arm/mach-ixp2000/include/mach/ixdp2x01.h
- *
- * Platform definitions for IXDP2X01 && IXDP2801 systems
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2004 (c) MontaVista Software, Inc. 
- *
- * Based on original code Copyright (c) 2002-2003 Intel Corporation
- * 
- * This file is licensed under  the terms of the GNU General Public 
- * License version 2. This program is licensed "as is" without any 
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __IXDP2X01_H__
-#define __IXDP2X01_H__
-
-#define	IXDP2X01_PHYS_CPLD_BASE		0xc6024000
-#define	IXDP2X01_VIRT_CPLD_BASE		0xfe000000
-#define	IXDP2X01_CPLD_REGION_SIZE	0x00100000
-
-#define IXDP2X01_CPLD_VIRT_REG(reg) (volatile unsigned long*)(IXDP2X01_VIRT_CPLD_BASE | reg)
-#define IXDP2X01_CPLD_PHYS_REG(reg) (IXDP2X01_PHYS_CPLD_BASE | reg)
-
-#define IXDP2X01_UART1_VIRT_BASE	IXDP2X01_CPLD_VIRT_REG(0x40)
-#define IXDP2X01_UART1_PHYS_BASE	IXDP2X01_CPLD_PHYS_REG(0x40)
-
-#define IXDP2X01_UART2_VIRT_BASE	IXDP2X01_CPLD_VIRT_REG(0x60)
-#define IXDP2X01_UART2_PHYS_BASE	IXDP2X01_CPLD_PHYS_REG(0x60)
-
-#define IXDP2X01_CS8900_VIRT_BASE	IXDP2X01_CPLD_VIRT_REG(0x80)
-#define IXDP2X01_CS8900_VIRT_END	(IXDP2X01_CS8900_VIRT_BASE + 16)
-
-#define IXDP2X01_CPLD_RESET_REG         IXDP2X01_CPLD_VIRT_REG(0x00)
-#define IXDP2X01_INT_MASK_SET_REG	IXDP2X01_CPLD_VIRT_REG(0x08)
-#define IXDP2X01_INT_STAT_REG		IXDP2X01_CPLD_VIRT_REG(0x0C)
-#define IXDP2X01_INT_RAW_REG		IXDP2X01_CPLD_VIRT_REG(0x10) 
-#define IXDP2X01_INT_MASK_CLR_REG	IXDP2X01_INT_RAW_REG
-#define IXDP2X01_INT_SIM_REG		IXDP2X01_CPLD_VIRT_REG(0x14)
-
-#define IXDP2X01_CPLD_FLASH_REG		IXDP2X01_CPLD_VIRT_REG(0x20)
-
-#define IXDP2X01_CPLD_FLASH_INTERN 	0x8000
-#define IXDP2X01_CPLD_FLASH_BANK_MASK 	0xF
-#define IXDP2X01_FLASH_WINDOW_BITS 	25
-#define IXDP2X01_FLASH_WINDOW_SIZE 	(1 << IXDP2X01_FLASH_WINDOW_BITS)
-#define IXDP2X01_FLASH_WINDOW_MASK 	(IXDP2X01_FLASH_WINDOW_SIZE - 1)
-
-#define	IXDP2X01_UART_CLK		1843200
-
-#define	IXDP2X01_GPIO_I2C_ENABLE	0x02
-#define	IXDP2X01_GPIO_SCL		0x07
-#define	IXDP2X01_GPIO_SDA		0x06
-
-#endif /* __IXDP2x01_H__ */
diff --git a/arch/arm/mach-ixp2000/include/mach/ixp2000-regs.h b/arch/arm/mach-ixp2000/include/mach/ixp2000-regs.h
deleted file mode 100644
index 822f63f2f4a2..000000000000
--- a/arch/arm/mach-ixp2000/include/mach/ixp2000-regs.h
+++ /dev/null
@@ -1,451 +0,0 @@
-/*
- * arch/arm/mach-ixp2000/include/mach/ixp2000-regs.h
- *
- * Chipset register definitions for IXP2400/2800 based systems.
- *
- * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
- *
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002 Intel Corp.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-#ifndef _IXP2000_REGS_H_
-#define _IXP2000_REGS_H_
-
-/*
- * IXP2000 linux memory map:
- *
- * virt		phys		size
- * fb000000	db000000	16M		PCI CFG1
- * fc000000	da000000	16M		PCI CFG0
- * fd000000	d8000000	16M		PCI I/O
- * fe[0-7]00000			8M		per-platform mappings
- * fe900000	80000000	1M		SRAM #0 (first MB)
- * fea00000	cb400000	1M		SCRATCH ring get/put
- * feb00000	c8000000	1M		MSF
- * fec00000	df000000	1M		PCI CSRs
- * fed00000	de000000	1M		PCI CREG
- * fee00000	d6000000	1M		INTCTL
- * fef00000	c0000000	1M		CAP
- */
-
-/* 
- * Static I/O regions.
- *
- * Most of the registers are clumped in 4K regions spread throughout
- * the 0xc0000000 -> 0xc0100000 address range, but we just map in
- * the whole range using a single 1 MB section instead of small
- * 4K pages.
- *
- * CAP stands for CSR Access Proxy.
- *
- * If you change the virtual address of this mapping, please propagate
- * the change to arch/arm/kernel/debug.S, which hardcodes the virtual
- * address of the UART located in this region.
- */
-
-#define	IXP2000_CAP_PHYS_BASE		0xc0000000
-#define	IXP2000_CAP_VIRT_BASE		0xfef00000
-#define	IXP2000_CAP_SIZE		0x00100000
-
-/*
- * Addresses for specific on-chip peripherals.
- */
-#define	IXP2000_SLOWPORT_CSR_VIRT_BASE	0xfef80000
-#define	IXP2000_GLOBAL_REG_VIRT_BASE	0xfef04000
-#define	IXP2000_UART_PHYS_BASE		0xc0030000
-#define	IXP2000_UART_VIRT_BASE		0xfef30000
-#define	IXP2000_TIMER_VIRT_BASE		0xfef20000
-#define	IXP2000_UENGINE_CSR_VIRT_BASE	0xfef18000
-#define	IXP2000_GPIO_VIRT_BASE		0xfef10000
-
-/*
- * Devices outside of the 0xc0000000 -> 0xc0100000 range.  The virtual
- * addresses of the INTCTL and PCI_CSR mappings are hardcoded in
- * entry-macro.S, so if you ever change these please propagate
- * the change.
- */
-#define IXP2000_INTCTL_PHYS_BASE	0xd6000000
-#define	IXP2000_INTCTL_VIRT_BASE	0xfee00000
-#define	IXP2000_INTCTL_SIZE		0x00100000
-
-#define IXP2000_PCI_CREG_PHYS_BASE	0xde000000
-#define	IXP2000_PCI_CREG_VIRT_BASE	0xfed00000
-#define	IXP2000_PCI_CREG_SIZE		0x00100000
-
-#define IXP2000_PCI_CSR_PHYS_BASE	0xdf000000
-#define	IXP2000_PCI_CSR_VIRT_BASE	0xfec00000
-#define	IXP2000_PCI_CSR_SIZE		0x00100000
-
-#define IXP2000_MSF_PHYS_BASE		0xc8000000
-#define IXP2000_MSF_VIRT_BASE		0xfeb00000
-#define IXP2000_MSF_SIZE		0x00100000
-
-#define IXP2000_SCRATCH_RING_PHYS_BASE	0xcb400000
-#define IXP2000_SCRATCH_RING_VIRT_BASE	0xfea00000
-#define IXP2000_SCRATCH_RING_SIZE	0x00100000
-
-#define IXP2000_SRAM0_PHYS_BASE		0x80000000
-#define IXP2000_SRAM0_VIRT_BASE		0xfe900000
-#define IXP2000_SRAM0_SIZE		0x00100000
-
-#define IXP2000_PCI_IO_PHYS_BASE	0xd8000000
-#define	IXP2000_PCI_IO_VIRT_BASE	0xfd000000
-#define IXP2000_PCI_IO_SIZE     	0x01000000
-
-#define IXP2000_PCI_CFG0_PHYS_BASE	0xda000000
-#define IXP2000_PCI_CFG0_VIRT_BASE	0xfc000000
-#define IXP2000_PCI_CFG0_SIZE   	0x01000000
-
-#define IXP2000_PCI_CFG1_PHYS_BASE	0xdb000000
-#define IXP2000_PCI_CFG1_VIRT_BASE	0xfb000000
-#define IXP2000_PCI_CFG1_SIZE		0x01000000
-
-/* 
- * Timers
- */
-#define	IXP2000_TIMER_REG(x)		((volatile unsigned long*)(IXP2000_TIMER_VIRT_BASE | (x)))
-/* Timer control */
-#define	IXP2000_T1_CTL			IXP2000_TIMER_REG(0x00)
-#define	IXP2000_T2_CTL			IXP2000_TIMER_REG(0x04)
-#define	IXP2000_T3_CTL			IXP2000_TIMER_REG(0x08)
-#define	IXP2000_T4_CTL			IXP2000_TIMER_REG(0x0c)
-/* Store initial value */
-#define	IXP2000_T1_CLD			IXP2000_TIMER_REG(0x10)
-#define	IXP2000_T2_CLD			IXP2000_TIMER_REG(0x14)
-#define	IXP2000_T3_CLD			IXP2000_TIMER_REG(0x18)
-#define	IXP2000_T4_CLD			IXP2000_TIMER_REG(0x1c)
-/* Read current value */
-#define	IXP2000_T1_CSR			IXP2000_TIMER_REG(0x20)
-#define	IXP2000_T2_CSR			IXP2000_TIMER_REG(0x24)
-#define	IXP2000_T3_CSR			IXP2000_TIMER_REG(0x28)
-#define	IXP2000_T4_CSR			IXP2000_TIMER_REG(0x2c)
-/* Clear associated timer interrupt */
-#define	IXP2000_T1_CLR			IXP2000_TIMER_REG(0x30)
-#define	IXP2000_T2_CLR			IXP2000_TIMER_REG(0x34)
-#define	IXP2000_T3_CLR			IXP2000_TIMER_REG(0x38)
-#define	IXP2000_T4_CLR			IXP2000_TIMER_REG(0x3c)
-/* Timer watchdog enable for T4 */
-#define	IXP2000_TWDE			IXP2000_TIMER_REG(0x40)
-
-#define	WDT_ENABLE			0x00000001
-#define	TIMER_DIVIDER_256		0x00000008
-#define	TIMER_ENABLE			0x00000080
-#define	IRQ_MASK_TIMER1         	(1 << 4)
-
-/*
- * Interrupt controller registers
- */
-#define IXP2000_INTCTL_REG(x)		(volatile unsigned long*)(IXP2000_INTCTL_VIRT_BASE | (x))
-#define IXP2000_IRQ_STATUS		IXP2000_INTCTL_REG(0x08)
-#define IXP2000_IRQ_ENABLE		IXP2000_INTCTL_REG(0x10)
-#define IXP2000_IRQ_ENABLE_SET		IXP2000_INTCTL_REG(0x10)
-#define IXP2000_IRQ_ENABLE_CLR		IXP2000_INTCTL_REG(0x18)
-#define IXP2000_FIQ_ENABLE_CLR		IXP2000_INTCTL_REG(0x14)
-#define IXP2000_IRQ_ERR_STATUS		IXP2000_INTCTL_REG(0x24)
-#define IXP2000_IRQ_ERR_ENABLE_SET	IXP2000_INTCTL_REG(0x2c)
-#define IXP2000_FIQ_ERR_ENABLE_CLR	IXP2000_INTCTL_REG(0x30)
-#define IXP2000_IRQ_ERR_ENABLE_CLR	IXP2000_INTCTL_REG(0x34)
-#define IXP2000_IRQ_THD_RAW_STATUS_A_0	IXP2000_INTCTL_REG(0x60)
-#define IXP2000_IRQ_THD_RAW_STATUS_A_1	IXP2000_INTCTL_REG(0x64)
-#define IXP2000_IRQ_THD_RAW_STATUS_A_2	IXP2000_INTCTL_REG(0x68)
-#define IXP2000_IRQ_THD_RAW_STATUS_A_3	IXP2000_INTCTL_REG(0x6c)
-#define IXP2000_IRQ_THD_RAW_STATUS_B_0	IXP2000_INTCTL_REG(0x80)
-#define IXP2000_IRQ_THD_RAW_STATUS_B_1	IXP2000_INTCTL_REG(0x84)
-#define IXP2000_IRQ_THD_RAW_STATUS_B_2	IXP2000_INTCTL_REG(0x88)
-#define IXP2000_IRQ_THD_RAW_STATUS_B_3	IXP2000_INTCTL_REG(0x8c)
-#define IXP2000_IRQ_THD_STATUS_A_0	IXP2000_INTCTL_REG(0xe0)
-#define IXP2000_IRQ_THD_STATUS_A_1	IXP2000_INTCTL_REG(0xe4)
-#define IXP2000_IRQ_THD_STATUS_A_2	IXP2000_INTCTL_REG(0xe8)
-#define IXP2000_IRQ_THD_STATUS_A_3	IXP2000_INTCTL_REG(0xec)
-#define IXP2000_IRQ_THD_STATUS_B_0	IXP2000_INTCTL_REG(0x100)
-#define IXP2000_IRQ_THD_STATUS_B_1	IXP2000_INTCTL_REG(0x104)
-#define IXP2000_IRQ_THD_STATUS_B_2	IXP2000_INTCTL_REG(0x108)
-#define IXP2000_IRQ_THD_STATUS_B_3	IXP2000_INTCTL_REG(0x10c)
-#define IXP2000_IRQ_THD_ENABLE_SET_A_0	IXP2000_INTCTL_REG(0x160)
-#define IXP2000_IRQ_THD_ENABLE_SET_A_1	IXP2000_INTCTL_REG(0x164)
-#define IXP2000_IRQ_THD_ENABLE_SET_A_2	IXP2000_INTCTL_REG(0x168)
-#define IXP2000_IRQ_THD_ENABLE_SET_A_3	IXP2000_INTCTL_REG(0x16c)
-#define IXP2000_IRQ_THD_ENABLE_SET_B_0	IXP2000_INTCTL_REG(0x180)
-#define IXP2000_IRQ_THD_ENABLE_SET_B_1	IXP2000_INTCTL_REG(0x184)
-#define IXP2000_IRQ_THD_ENABLE_SET_B_2	IXP2000_INTCTL_REG(0x188)
-#define IXP2000_IRQ_THD_ENABLE_SET_B_3	IXP2000_INTCTL_REG(0x18c)
-#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_0	IXP2000_INTCTL_REG(0x1e0)
-#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_1	IXP2000_INTCTL_REG(0x1e4)
-#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_2	IXP2000_INTCTL_REG(0x1e8)
-#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_3	IXP2000_INTCTL_REG(0x1ec)
-#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_0	IXP2000_INTCTL_REG(0x200)
-#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_1	IXP2000_INTCTL_REG(0x204)
-#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_2	IXP2000_INTCTL_REG(0x208)
-#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_3	IXP2000_INTCTL_REG(0x20c)
-
-/*
- * Mask of valid IRQs in the 32-bit IRQ register. We use
- * this to mark certain IRQs as being invalid.
- */
-#define	IXP2000_VALID_IRQ_MASK	0x0f0fffff
-
-/*
- * PCI config register access from core
- */
-#define IXP2000_PCI_CREG(x)		(volatile unsigned long*)(IXP2000_PCI_CREG_VIRT_BASE | (x))
-#define IXP2000_PCI_CMDSTAT 		IXP2000_PCI_CREG(0x04)
-#define IXP2000_PCI_CSR_BAR		IXP2000_PCI_CREG(0x10)
-#define IXP2000_PCI_SRAM_BAR		IXP2000_PCI_CREG(0x14)
-#define IXP2000_PCI_SDRAM_BAR		IXP2000_PCI_CREG(0x18)
-
-/*
- * PCI CSRs
- */
-#define IXP2000_PCI_CSR(x)		(volatile unsigned long*)(IXP2000_PCI_CSR_VIRT_BASE | (x))
-
-/*
- * PCI outbound interrupts
- */
-#define IXP2000_PCI_OUT_INT_STATUS	IXP2000_PCI_CSR(0x30)
-#define IXP2000_PCI_OUT_INT_MASK	IXP2000_PCI_CSR(0x34)
-/*
- * PCI communications
- */
-#define IXP2000_PCI_MAILBOX0		IXP2000_PCI_CSR(0x50)
-#define IXP2000_PCI_MAILBOX1		IXP2000_PCI_CSR(0x54)
-#define IXP2000_PCI_MAILBOX2		IXP2000_PCI_CSR(0x58)
-#define IXP2000_PCI_MAILBOX3		IXP2000_PCI_CSR(0x5C)
-#define IXP2000_XSCALE_DOORBELL		IXP2000_PCI_CSR(0x60)
-#define IXP2000_XSCALE_DOORBELL_SETUP	IXP2000_PCI_CSR(0x64)
-#define IXP2000_PCI_DOORBELL		IXP2000_PCI_CSR(0x70)
-#define IXP2000_PCI_DOORBELL_SETUP	IXP2000_PCI_CSR(0x74)
-
-/*
- * DMA engines
- */
-#define IXP2000_PCI_CH1_BYTE_CNT	IXP2000_PCI_CSR(0x80)
-#define IXP2000_PCI_CH1_ADDR		IXP2000_PCI_CSR(0x84)
-#define IXP2000_PCI_CH1_DRAM_ADDR	IXP2000_PCI_CSR(0x88)
-#define IXP2000_PCI_CH1_DESC_PTR	IXP2000_PCI_CSR(0x8C)
-#define IXP2000_PCI_CH1_CNTRL		IXP2000_PCI_CSR(0x90)
-#define IXP2000_PCI_CH1_ME_PARAM	IXP2000_PCI_CSR(0x94)
-#define IXP2000_PCI_CH2_BYTE_CNT	IXP2000_PCI_CSR(0xA0)
-#define IXP2000_PCI_CH2_ADDR		IXP2000_PCI_CSR(0xA4)
-#define IXP2000_PCI_CH2_DRAM_ADDR	IXP2000_PCI_CSR(0xA8)
-#define IXP2000_PCI_CH2_DESC_PTR	IXP2000_PCI_CSR(0xAC)
-#define IXP2000_PCI_CH2_CNTRL		IXP2000_PCI_CSR(0xB0)
-#define IXP2000_PCI_CH2_ME_PARAM	IXP2000_PCI_CSR(0xB4)
-#define IXP2000_PCI_CH3_BYTE_CNT	IXP2000_PCI_CSR(0xC0)
-#define IXP2000_PCI_CH3_ADDR		IXP2000_PCI_CSR(0xC4)
-#define IXP2000_PCI_CH3_DRAM_ADDR	IXP2000_PCI_CSR(0xC8)
-#define IXP2000_PCI_CH3_DESC_PTR	IXP2000_PCI_CSR(0xCC)
-#define IXP2000_PCI_CH3_CNTRL		IXP2000_PCI_CSR(0xD0)
-#define IXP2000_PCI_CH3_ME_PARAM	IXP2000_PCI_CSR(0xD4)
-#define IXP2000_DMA_INF_MODE		IXP2000_PCI_CSR(0xE0)
-/*
- * Size masks for BARs
- */
-#define IXP2000_PCI_SRAM_BASE_ADDR_MASK	IXP2000_PCI_CSR(0xFC)
-#define IXP2000_PCI_DRAM_BASE_ADDR_MASK	IXP2000_PCI_CSR(0x100)
-/*
- * Control and uEngine related
- */
-#define IXP2000_PCI_CONTROL		IXP2000_PCI_CSR(0x13C)
-#define IXP2000_PCI_ADDR_EXT		IXP2000_PCI_CSR(0x140)
-#define IXP2000_PCI_ME_PUSH_STATUS	IXP2000_PCI_CSR(0x148)
-#define IXP2000_PCI_ME_PUSH_EN		IXP2000_PCI_CSR(0x14C)
-#define IXP2000_PCI_ERR_STATUS		IXP2000_PCI_CSR(0x150)
-#define IXP2000_PCI_ERR_ENABLE		IXP2000_PCI_CSR(0x154)
-/*
- * Inbound PCI interrupt control
- */
-#define IXP2000_PCI_XSCALE_INT_STATUS	IXP2000_PCI_CSR(0x158)
-#define IXP2000_PCI_XSCALE_INT_ENABLE	IXP2000_PCI_CSR(0x15C)
-
-#define IXP2000_PCICNTL_PNR		(1<<17)	/* PCI not Reset bit of PCI_CONTROL */
-#define IXP2000_PCICNTL_PCF		(1<<28)	/* PCI Central function bit */
-#define IXP2000_XSCALE_INT		(1<<1)	/* Interrupt from XScale to PCI */
-
-/* These are from the IRQ register in the PCI ISR register */
-#define PCI_CONTROL_BE_DEO		(1 << 22)	/* Big Endian Data Enable Out */
-#define PCI_CONTROL_BE_DEI		(1 << 21)	/* Big Endian Data Enable In  */
-#define PCI_CONTROL_BE_BEO		(1 << 20)	/* Big Endian Byte Enable Out */
-#define PCI_CONTROL_BE_BEI		(1 << 19)	/* Big Endian Byte Enable In  */
-#define PCI_CONTROL_IEE			(1 << 17)	/* I/O cycle Endian swap Enable */
-
-#define IXP2000_PCI_RST_REL		(1 << 2)
-#define CFG_RST_DIR			(*IXP2000_PCI_CONTROL & IXP2000_PCICNTL_PCF)
-#define CFG_PCI_BOOT_HOST		(1 << 2)
-#define CFG_BOOT_PROM			(1 << 1)
-
-/*
- * SlowPort CSRs
- *
- * The slowport is used to access things like flash, SONET framer control
- * ports, slave microprocessors, CPLDs, and others of chip memory mapped
- * peripherals.
- */
-#define	SLOWPORT_CSR(x)		(volatile unsigned long*)(IXP2000_SLOWPORT_CSR_VIRT_BASE | (x))
-
-#define	IXP2000_SLOWPORT_CCR		SLOWPORT_CSR(0x00)
-#define	IXP2000_SLOWPORT_WTC1		SLOWPORT_CSR(0x04)
-#define	IXP2000_SLOWPORT_WTC2		SLOWPORT_CSR(0x08)
-#define	IXP2000_SLOWPORT_RTC1		SLOWPORT_CSR(0x0c)
-#define	IXP2000_SLOWPORT_RTC2		SLOWPORT_CSR(0x10)
-#define	IXP2000_SLOWPORT_FSR		SLOWPORT_CSR(0x14)
-#define	IXP2000_SLOWPORT_PCR		SLOWPORT_CSR(0x18)
-#define	IXP2000_SLOWPORT_ADC		SLOWPORT_CSR(0x1C)
-#define	IXP2000_SLOWPORT_FAC		SLOWPORT_CSR(0x20)
-#define	IXP2000_SLOWPORT_FRM		SLOWPORT_CSR(0x24)
-#define	IXP2000_SLOWPORT_FIN		SLOWPORT_CSR(0x28)
-
-/*
- * CCR values.  
- * The CCR configures the clock division for the slowport interface.
- */
-#define	SLOWPORT_CCR_DIV_1		0x00
-#define	SLOWPORT_CCR_DIV_2		0x01
-#define	SLOWPORT_CCR_DIV_4		0x02
-#define	SLOWPORT_CCR_DIV_6		0x03
-#define	SLOWPORT_CCR_DIV_8		0x04
-#define	SLOWPORT_CCR_DIV_10		0x05
-#define	SLOWPORT_CCR_DIV_12		0x06
-#define	SLOWPORT_CCR_DIV_14		0x07
-#define	SLOWPORT_CCR_DIV_16		0x08
-#define	SLOWPORT_CCR_DIV_18		0x09
-#define	SLOWPORT_CCR_DIV_20		0x0a
-#define	SLOWPORT_CCR_DIV_22		0x0b
-#define	SLOWPORT_CCR_DIV_24		0x0c
-#define	SLOWPORT_CCR_DIV_26		0x0d
-#define	SLOWPORT_CCR_DIV_28		0x0e
-#define	SLOWPORT_CCR_DIV_30		0x0f
-
-/*
- * PCR values.  PCR configure the mode of the interface.
- */
-#define	SLOWPORT_MODE_FLASH		0x00
-#define	SLOWPORT_MODE_LUCENT		0x01
-#define	SLOWPORT_MODE_PMC_SIERRA	0x02
-#define	SLOWPORT_MODE_INTEL_UP		0x03
-#define	SLOWPORT_MODE_MOTOROLA_UP	0x04
-
-/*
- * ADC values.  Defines data and address bus widths.
- */
-#define	SLOWPORT_ADDR_WIDTH_8		0x00
-#define	SLOWPORT_ADDR_WIDTH_16		0x01
-#define	SLOWPORT_ADDR_WIDTH_24		0x02
-#define	SLOWPORT_ADDR_WIDTH_32		0x03
-#define	SLOWPORT_DATA_WIDTH_8		0x00
-#define	SLOWPORT_DATA_WIDTH_16		0x10
-#define	SLOWPORT_DATA_WIDTH_24		0x20
-#define	SLOWPORT_DATA_WIDTH_32		0x30
-
-/*
- * Masks and shifts for various fields in the WTC and RTC registers.
- */
-#define	SLOWPORT_WRTC_MASK_HD		0x0003
-#define	SLOWPORT_WRTC_MASK_PW		0x003c
-#define	SLOWPORT_WRTC_MASK_SU		0x03c0
-
-#define	SLOWPORT_WRTC_SHIFT_HD		0x00
-#define	SLOWPORT_WRTC_SHIFT_SU		0x02
-#define	SLOWPORT_WRTC_SHFIT_PW		0x06
-
-
-/*
- * GPIO registers & GPIO interface.
- */
-#define IXP2000_GPIO_REG(x)		((volatile unsigned long*)(IXP2000_GPIO_VIRT_BASE+(x)))
-#define IXP2000_GPIO_PLR		IXP2000_GPIO_REG(0x00)
-#define IXP2000_GPIO_PDPR		IXP2000_GPIO_REG(0x04)
-#define IXP2000_GPIO_PDSR		IXP2000_GPIO_REG(0x08)
-#define IXP2000_GPIO_PDCR		IXP2000_GPIO_REG(0x0c)
-#define IXP2000_GPIO_POPR		IXP2000_GPIO_REG(0x10)
-#define IXP2000_GPIO_POSR		IXP2000_GPIO_REG(0x14)
-#define IXP2000_GPIO_POCR		IXP2000_GPIO_REG(0x18)
-#define IXP2000_GPIO_REDR		IXP2000_GPIO_REG(0x1c)
-#define IXP2000_GPIO_FEDR		IXP2000_GPIO_REG(0x20)
-#define IXP2000_GPIO_EDSR		IXP2000_GPIO_REG(0x24)
-#define IXP2000_GPIO_LSHR		IXP2000_GPIO_REG(0x28)
-#define IXP2000_GPIO_LSLR		IXP2000_GPIO_REG(0x2c)
-#define IXP2000_GPIO_LDSR		IXP2000_GPIO_REG(0x30)
-#define IXP2000_GPIO_INER		IXP2000_GPIO_REG(0x34)
-#define IXP2000_GPIO_INSR		IXP2000_GPIO_REG(0x38)
-#define IXP2000_GPIO_INCR		IXP2000_GPIO_REG(0x3c)
-#define IXP2000_GPIO_INST		IXP2000_GPIO_REG(0x40)
-
-/*
- * "Global" registers...whatever that's supposed to mean.
- */
-#define GLOBAL_REG_BASE			(IXP2000_GLOBAL_REG_VIRT_BASE + 0x0a00)
-#define GLOBAL_REG(x)			(volatile unsigned long*)(GLOBAL_REG_BASE | (x))
-
-#define IXP2000_MAJ_PROD_TYPE_MASK	0x001F0000
-#define IXP2000_MAJ_PROD_TYPE_IXP2000	0x00000000
-#define IXP2000_MIN_PROD_TYPE_MASK 	0x0000FF00
-#define IXP2000_MIN_PROD_TYPE_IXP2400	0x00000200
-#define IXP2000_MIN_PROD_TYPE_IXP2850	0x00000100
-#define IXP2000_MIN_PROD_TYPE_IXP2800	0x00000000
-#define IXP2000_MAJ_REV_MASK	      	0x000000F0
-#define IXP2000_MIN_REV_MASK	      	0x0000000F
-#define IXP2000_PROD_ID_MASK		0xFFFFFFFF
-
-#define IXP2000_PRODUCT_ID		GLOBAL_REG(0x00)
-#define IXP2000_MISC_CONTROL		GLOBAL_REG(0x04)
-#define IXP2000_MSF_CLK_CNTRL  		GLOBAL_REG(0x08)
-#define IXP2000_RESET0      		GLOBAL_REG(0x0c)
-#define IXP2000_RESET1      		GLOBAL_REG(0x10)
-#define IXP2000_CCR            		GLOBAL_REG(0x14)
-#define	IXP2000_STRAP_OPTIONS  		GLOBAL_REG(0x18)
-
-#define	RSTALL				(1 << 16)
-#define	WDT_RESET_ENABLE		0x01000000
-
-
-/*
- * MSF registers.  The IXP2400 and IXP2800 have somewhat different MSF
- * units, but the registers that differ between the two don't overlap,
- * so we can have one register list for both.
- */
-#define IXP2000_MSF_REG(x)			((volatile unsigned long*)(IXP2000_MSF_VIRT_BASE + (x)))
-#define IXP2000_MSF_RX_CONTROL			IXP2000_MSF_REG(0x0000)
-#define IXP2000_MSF_TX_CONTROL			IXP2000_MSF_REG(0x0004)
-#define IXP2000_MSF_INTERRUPT_STATUS		IXP2000_MSF_REG(0x0008)
-#define IXP2000_MSF_INTERRUPT_ENABLE		IXP2000_MSF_REG(0x000c)
-#define IXP2000_MSF_CSIX_TYPE_MAP		IXP2000_MSF_REG(0x0010)
-#define IXP2000_MSF_FC_EGRESS_STATUS		IXP2000_MSF_REG(0x0014)
-#define IXP2000_MSF_FC_INGRESS_STATUS		IXP2000_MSF_REG(0x0018)
-#define IXP2000_MSF_HWM_CONTROL			IXP2000_MSF_REG(0x0024)
-#define IXP2000_MSF_FC_STATUS_OVERRIDE		IXP2000_MSF_REG(0x0028)
-#define IXP2000_MSF_CLOCK_CONTROL		IXP2000_MSF_REG(0x002c)
-#define IXP2000_MSF_RX_PORT_MAP			IXP2000_MSF_REG(0x0040)
-#define IXP2000_MSF_RBUF_ELEMENT_DONE		IXP2000_MSF_REG(0x0044)
-#define IXP2000_MSF_RX_MPHY_POLL_LIMIT		IXP2000_MSF_REG(0x0048)
-#define IXP2000_MSF_RX_CALENDAR_LENGTH		IXP2000_MSF_REG(0x0048)
-#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_0	IXP2000_MSF_REG(0x0050)
-#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_1	IXP2000_MSF_REG(0x0054)
-#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_2	IXP2000_MSF_REG(0x0058)
-#define IXP2000_MSF_TX_SEQUENCE_0		IXP2000_MSF_REG(0x0060)
-#define IXP2000_MSF_TX_SEQUENCE_1		IXP2000_MSF_REG(0x0064)
-#define IXP2000_MSF_TX_SEQUENCE_2		IXP2000_MSF_REG(0x0068)
-#define IXP2000_MSF_TX_MPHY_POLL_LIMIT		IXP2000_MSF_REG(0x0070)
-#define IXP2000_MSF_TX_CALENDAR_LENGTH		IXP2000_MSF_REG(0x0070)
-#define IXP2000_MSF_RX_UP_CONTROL_0		IXP2000_MSF_REG(0x0080)
-#define IXP2000_MSF_RX_UP_CONTROL_1		IXP2000_MSF_REG(0x0084)
-#define IXP2000_MSF_RX_UP_CONTROL_2		IXP2000_MSF_REG(0x0088)
-#define IXP2000_MSF_RX_UP_CONTROL_3		IXP2000_MSF_REG(0x008c)
-#define IXP2000_MSF_TX_UP_CONTROL_0		IXP2000_MSF_REG(0x0090)
-#define IXP2000_MSF_TX_UP_CONTROL_1		IXP2000_MSF_REG(0x0094)
-#define IXP2000_MSF_TX_UP_CONTROL_2		IXP2000_MSF_REG(0x0098)
-#define IXP2000_MSF_TX_UP_CONTROL_3		IXP2000_MSF_REG(0x009c)
-#define IXP2000_MSF_TRAIN_DATA			IXP2000_MSF_REG(0x00a0)
-#define IXP2000_MSF_TRAIN_CALENDAR		IXP2000_MSF_REG(0x00a4)
-#define IXP2000_MSF_TRAIN_FLOW_CONTROL		IXP2000_MSF_REG(0x00a8)
-#define IXP2000_MSF_TX_CALENDAR_0		IXP2000_MSF_REG(0x1000)
-#define IXP2000_MSF_RX_PORT_CALENDAR_STATUS	IXP2000_MSF_REG(0x1400)
-
-
-#endif				/* _IXP2000_H_ */
diff --git a/arch/arm/mach-ixp2000/include/mach/memory.h b/arch/arm/mach-ixp2000/include/mach/memory.h
deleted file mode 100644
index 5f0c4fd4076a..000000000000
--- a/arch/arm/mach-ixp2000/include/mach/memory.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * arch/arm/mach-ixp2000/include/mach/memory.h
- *
- * Copyright (c) 2002 Intel Corp.
- * Copyright (c) 2003-2004 MontaVista Software, Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET	UL(0x00000000)
-
-#include <mach/ixp2000-regs.h>
-
-#define IXP2000_PCI_SDRAM_OFFSET	(*IXP2000_PCI_SDRAM_BAR & 0xfffffff0)
-
-#define __phys_to_bus(x)	((x) + (IXP2000_PCI_SDRAM_OFFSET - PHYS_OFFSET))
-#define __bus_to_phys(x)	((x) - (IXP2000_PCI_SDRAM_OFFSET - PHYS_OFFSET))
-
-#define __virt_to_bus(v)	__phys_to_bus(__virt_to_phys(v))
-#define __bus_to_virt(b)	__phys_to_virt(__bus_to_phys(b))
-#define __pfn_to_bus(p)		__phys_to_bus(__pfn_to_phys(p))
-#define __bus_to_pfn(b)		__phys_to_pfn(__bus_to_phys(b))
-
-#endif
-
diff --git a/arch/arm/mach-ixp2000/include/mach/platform.h b/arch/arm/mach-ixp2000/include/mach/platform.h
deleted file mode 100644
index bb0f8dcf9ee1..000000000000
--- a/arch/arm/mach-ixp2000/include/mach/platform.h
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- * arch/arm/mach-ixp2000/include/mach/platform.h
- *
- * Various bits of code used by platform-level code.
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2004 (c) MontaVista Software, Inc. 
- * 
- * This file is licensed under  the terms of the GNU General Public 
- * License version 2. This program is licensed "as is" without any 
- * warranty of any kind, whether express or implied.
- */
-
-
-#ifndef __ASSEMBLY__
-
-static inline unsigned long ixp2000_reg_read(volatile void *reg)
-{
-	return *((volatile unsigned long *)reg);
-}
-
-static inline void ixp2000_reg_write(volatile void *reg, unsigned long val)
-{
-	*((volatile unsigned long *)reg) = val;
-}
-
-/*
- * On the IXP2400, we can't use XCB=000 due to chip bugs.  We use
- * XCB=101 instead, but that makes all I/O accesses bufferable.  This
- * is not a problem in general, but we do have to be slightly more
- * careful because I/O writes are no longer automatically flushed out
- * of the write buffer.
- *
- * In cases where we want to make sure that a write has been flushed
- * out of the write buffer before we proceed, for example when masking
- * a device interrupt before re-enabling IRQs in CPSR, we can use this
- * function, ixp2000_reg_wrb, which performs a write, a readback, and
- * issues a dummy instruction dependent on the value of the readback
- * (mov rX, rX) to make sure that the readback has completed before we
- * continue.
- */
-static inline void ixp2000_reg_wrb(volatile void *reg, unsigned long val)
-{
-	unsigned long dummy;
-
-	*((volatile unsigned long *)reg) = val;
-
-	dummy = *((volatile unsigned long *)reg);
-	__asm__ __volatile__("mov %0, %0" : "+r" (dummy));
-}
-
-/*
- * Boards may multiplex different devices on the 2nd channel of 
- * the slowport interface that each need different configuration 
- * settings.  For example, the IXDP2400 uses channel 2 on the interface 
- * to access the CPLD, the switch fabric card, and the media card.  Each
- * one needs a different mode so drivers must save/restore the mode 
- * before and after each operation.  
- *
- * acquire_slowport(&your_config);
- * ...
- * do slowport operations
- * ...
- * release_slowport();
- *
- * Note that while you have the slowport, you are holding a spinlock,
- * so your code should be written as if you explicitly acquired a lock.
- *
- * The configuration only affects device 2 on the slowport, so the
- * MTD map driver does not acquire/release the slowport.  
- */
-struct slowport_cfg {
-	unsigned long CCR;	/* Clock divide */
-	unsigned long WTC;	/* Write Timing Control */
-	unsigned long RTC;	/* Read Timing Control */
-	unsigned long PCR;	/* Protocol Control Register */
-	unsigned long ADC;	/* Address/Data Width Control */
-};
-
-
-void ixp2000_acquire_slowport(struct slowport_cfg *, struct slowport_cfg *);
-void ixp2000_release_slowport(struct slowport_cfg *);
-
-/*
- * IXP2400 A0/A1 and  IXP2800 A0/A1/A2 have broken slowport that requires
- * tweaking of addresses in the MTD driver.
- */
-static inline unsigned ixp2000_has_broken_slowport(void)
-{
-	unsigned long id = *IXP2000_PRODUCT_ID;
-	unsigned long id_prod = id & (IXP2000_MAJ_PROD_TYPE_MASK |
-				      IXP2000_MIN_PROD_TYPE_MASK);
-	return (((id_prod ==
-		  /* fixed in IXP2400-B0 */
-		  (IXP2000_MAJ_PROD_TYPE_IXP2000 |
-		   IXP2000_MIN_PROD_TYPE_IXP2400)) &&
-		 ((id & IXP2000_MAJ_REV_MASK) == 0)) ||
-		((id_prod ==
-		  /* fixed in IXP2800-B0 */
-		  (IXP2000_MAJ_PROD_TYPE_IXP2000 |
-		   IXP2000_MIN_PROD_TYPE_IXP2800)) &&
-		 ((id & IXP2000_MAJ_REV_MASK) == 0)) ||
-		((id_prod ==
-		  /* fixed in IXP2850-B0 */
-		  (IXP2000_MAJ_PROD_TYPE_IXP2000 |
-		   IXP2000_MIN_PROD_TYPE_IXP2850)) &&
-		 ((id & IXP2000_MAJ_REV_MASK) == 0)));
-}
-
-static inline unsigned int ixp2000_has_flash(void)
-{
-	return ((*IXP2000_STRAP_OPTIONS) & (CFG_BOOT_PROM));
-}
-
-static inline unsigned int ixp2000_is_pcimaster(void)
-{
-	return ((*IXP2000_STRAP_OPTIONS) & (CFG_PCI_BOOT_HOST));
-}
-
-void ixp2000_map_io(void);
-void ixp2000_uart_init(void);
-void ixp2000_init_irq(void);
-void ixp2000_init_time(unsigned long);
-void ixp2000_restart(char, const char *);
-unsigned long ixp2000_gettimeoffset(void);
-
-struct pci_sys_data;
-
-u32 *ixp2000_pci_config_addr(unsigned int bus, unsigned int devfn, int where);
-void ixp2000_pci_preinit(void);
-int ixp2000_pci_setup(int, struct pci_sys_data*);
-struct pci_bus* ixp2000_pci_scan_bus(int, struct pci_sys_data*);
-int ixp2000_pci_read_config(struct pci_bus*, unsigned int, int, int, u32 *);
-int ixp2000_pci_write_config(struct pci_bus*, unsigned int, int, int, u32);
-
-/*
- * Several of the IXP2000 systems have banked flash so we need to extend the
- * flash_platform_data structure with some private pointers
- */
-struct ixp2000_flash_data {
-	struct flash_platform_data *platform_data;
-	int nr_banks;
-	unsigned long (*bank_setup)(unsigned long);
-};
-
-struct ixp2000_i2c_pins {
-	unsigned long sda_pin;
-	unsigned long scl_pin;
-};
-
-
-#endif /*  !__ASSEMBLY__ */
diff --git a/arch/arm/mach-ixp2000/include/mach/timex.h b/arch/arm/mach-ixp2000/include/mach/timex.h
deleted file mode 100644
index 835e659f93d4..000000000000
--- a/arch/arm/mach-ixp2000/include/mach/timex.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-ixp2000/include/mach/timex.h
- *
- * IXP2000 architecture timex specifications
- */
-
-
-/*
- * Default clock is 50MHz APB, but platform code can override this
- */
-#define CLOCK_TICK_RATE	50000000
-
-
diff --git a/arch/arm/mach-ixp2000/include/mach/uncompress.h b/arch/arm/mach-ixp2000/include/mach/uncompress.h
deleted file mode 100644
index ce363087df78..000000000000
--- a/arch/arm/mach-ixp2000/include/mach/uncompress.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * arch/arm/mach-ixp2000/include/mach/uncompress.h
- *
- *
- * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2002 Intel Corp.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- */
-
-#include <linux/serial_reg.h>
-
-#define UART_BASE	0xc0030000
-
-#define PHYS(x)          ((volatile unsigned long *)(UART_BASE + x))
-
-#define UARTDR          PHYS(0x00)      /* Transmit reg dlab=0 */
-#define UARTDLL         PHYS(0x00)      /* Divisor Latch reg dlab=1*/
-#define UARTDLM         PHYS(0x04)      /* Divisor Latch reg dlab=1*/
-#define UARTIER         PHYS(0x04)      /* Interrupt enable reg */
-#define UARTFCR         PHYS(0x08)      /* FIFO control reg dlab =0*/
-#define UARTLCR         PHYS(0x0c)      /* Control reg */
-#define UARTSR          PHYS(0x14)      /* Status reg */
-
-
-static inline void putc(int c)
-{
-	int j = 0x1000;
-
-	while (--j && !(*UARTSR & UART_LSR_THRE))
-		barrier();
-
-	*UARTDR = c;
-}
-
-static inline void flush(void)
-{
-}
-
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-ixp2000/ixdp2400.c b/arch/arm/mach-ixp2000/ixdp2400.c
deleted file mode 100644
index 915ad49e3b8f..000000000000
--- a/arch/arm/mach-ixp2000/ixdp2400.c
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * arch/arm/mach-ixp2000/ixdp2400.c
- *
- * IXDP2400 platform support
- *
- * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002 Intel Corp.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/device.h>
-#include <linux/bitops.h>
-#include <linux/pci.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/pci.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/arch.h>
-
-/*************************************************************************
- * IXDP2400 timer tick
- *************************************************************************/
-static void __init ixdp2400_timer_init(void)
-{
-	int numerator, denominator;
-	int denom_array[] = {2, 4, 8, 16, 1, 2, 4, 8};
-
-	numerator = (*(IXDP2400_CPLD_SYS_CLK_M) & 0xFF) *2;
-	denominator = denom_array[(*(IXDP2400_CPLD_SYS_CLK_N) & 0x7)];
-
-	ixp2000_init_time(((3125000 * numerator) / (denominator)) / 2);
-}
-
-static struct sys_timer ixdp2400_timer = {
-	.init		= ixdp2400_timer_init,
-	.offset		= ixp2000_gettimeoffset,
-};
-
-/*************************************************************************
- * IXDP2400 PCI
- *************************************************************************/
-void __init ixdp2400_pci_preinit(void)
-{
-	ixp2000_reg_write(IXP2000_PCI_ADDR_EXT, 0x00100000);
-	ixp2000_pci_preinit();
-	pcibios_setup("firmware");
-}
-
-int ixdp2400_pci_setup(int nr, struct pci_sys_data *sys)
-{
-	sys->mem_offset = 0xe0000000;
-
-	ixp2000_pci_setup(nr, sys);
-
-	return 1;
-}
-
-static int __init ixdp2400_pci_map_irq(const struct pci_dev *dev, u8 slot,
-	u8 pin)
-{
-	if (ixdp2x00_master_npu()) {
-
-		/*
-		 * Root bus devices.  Slave NPU is only one with interrupt.
-		 * Everything else, we just return -1 b/c nothing else
-		 * on the root bus has interrupts.
-		 */
-		if(!dev->bus->self) {
-			if(dev->devfn == IXDP2X00_SLAVE_NPU_DEVFN )
-				return IRQ_IXDP2400_INGRESS_NPU;
-
-			return -1;
-		}
-
-		/*
-		 * Bridge behind the PMC slot.
-		 * NOTE: Only INTA from the PMC slot is routed. VERY BAD.
-		 */
-		if(dev->bus->self->devfn == IXDP2X00_PMC_DEVFN &&
-			dev->bus->parent->self->devfn == IXDP2X00_P2P_DEVFN &&
-			!dev->bus->parent->self->bus->parent)
-				  return IRQ_IXDP2400_PMC;
-
-		/*
-		 * Device behind the first bridge
-		 */
-		if(dev->bus->self->devfn == IXDP2X00_P2P_DEVFN) {
-			switch(dev->devfn) {
-				case IXDP2400_MASTER_ENET_DEVFN:	
-					return IRQ_IXDP2400_ENET;	
-			
-				case IXDP2400_MEDIA_DEVFN:
-					return IRQ_IXDP2400_MEDIA_PCI;
-
-				case IXDP2400_SWITCH_FABRIC_DEVFN:
-					return IRQ_IXDP2400_SF_PCI;
-
-				case IXDP2X00_PMC_DEVFN:
-					return IRQ_IXDP2400_PMC;
-			}
-		}
-
-		return -1;
-	} else return IRQ_IXP2000_PCIB; /* Slave NIC interrupt */
-}
-
-
-static void ixdp2400_pci_postinit(void)
-{
-	struct pci_dev *dev;
-
-	if (ixdp2x00_master_npu()) {
-		dev = pci_get_bus_and_slot(1, IXDP2400_SLAVE_ENET_DEVFN);
-		pci_stop_and_remove_bus_device(dev);
-		pci_dev_put(dev);
-	} else {
-		dev = pci_get_bus_and_slot(1, IXDP2400_MASTER_ENET_DEVFN);
-		pci_stop_and_remove_bus_device(dev);
-		pci_dev_put(dev);
-
-		ixdp2x00_slave_pci_postinit();
-	}
-}
-
-static struct hw_pci ixdp2400_pci __initdata = {
-	.nr_controllers	= 1,
-	.setup		= ixdp2400_pci_setup,
-	.preinit	= ixdp2400_pci_preinit,
-	.postinit	= ixdp2400_pci_postinit,
-	.scan		= ixp2000_pci_scan_bus,
-	.map_irq	= ixdp2400_pci_map_irq,
-};
-
-int __init ixdp2400_pci_init(void)
-{
-	if (machine_is_ixdp2400())
-		pci_common_init(&ixdp2400_pci);
-
-	return 0;
-}
-
-subsys_initcall(ixdp2400_pci_init);
-
-void __init ixdp2400_init_irq(void)
-{
-	ixdp2x00_init_irq(IXDP2400_CPLD_INT_STAT, IXDP2400_CPLD_INT_MASK, IXDP2400_NR_IRQS);
-}
-
-MACHINE_START(IXDP2400, "Intel IXDP2400 Development Platform")
-	/* Maintainer: MontaVista Software, Inc. */
-	.atag_offset	= 0x100,
-	.map_io		= ixdp2x00_map_io,
-	.init_irq	= ixdp2400_init_irq,
-	.timer		= &ixdp2400_timer,
-	.init_machine	= ixdp2x00_init_machine,
-	.restart	= ixp2000_restart,
-MACHINE_END
-
diff --git a/arch/arm/mach-ixp2000/ixdp2800.c b/arch/arm/mach-ixp2000/ixdp2800.c
deleted file mode 100644
index a9f1819ea049..000000000000
--- a/arch/arm/mach-ixp2000/ixdp2800.c
+++ /dev/null
@@ -1,295 +0,0 @@
-/*
- * arch/arm/mach-ixp2000/ixdp2800.c
- *
- * IXDP2800 platform support
- *
- * Original Author: Jeffrey Daly <jeffrey.daly@intel.com>
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002 Intel Corp.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/device.h>
-#include <linux/bitops.h>
-#include <linux/pci.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/pci.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/arch.h>
-
-/*************************************************************************
- * IXDP2800 timer tick
- *************************************************************************/
-
-static void __init ixdp2800_timer_init(void)
-{
-	ixp2000_init_time(50000000);
-}
-
-static struct sys_timer ixdp2800_timer = {
-	.init		= ixdp2800_timer_init,
-	.offset		= ixp2000_gettimeoffset,
-};
-
-/*************************************************************************
- * IXDP2800 PCI
- *************************************************************************/
-static void __init ixdp2800_slave_disable_pci_master(void)
-{
-	*IXP2000_PCI_CMDSTAT &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
-}
-
-static void __init ixdp2800_master_wait_for_slave(void)
-{
-	volatile u32 *addr;
-
-	printk(KERN_INFO "IXDP2800: waiting for slave NPU to configure "
-			 "its BAR sizes\n");
-
-	addr = ixp2000_pci_config_addr(0, IXDP2X00_SLAVE_NPU_DEVFN,
-					PCI_BASE_ADDRESS_1);
-	do {
-		*addr = 0xffffffff;
-		cpu_relax();
-	} while (*addr != 0xfe000008);
-
-	addr = ixp2000_pci_config_addr(0, IXDP2X00_SLAVE_NPU_DEVFN,
-					PCI_BASE_ADDRESS_2);
-	do {
-		*addr = 0xffffffff;
-		cpu_relax();
-	} while (*addr != 0xc0000008);
-
-	/*
-	 * Configure the slave's SDRAM BAR by hand.
-	 */
-	*addr = 0x40000008;
-}
-
-static void __init ixdp2800_slave_wait_for_master_enable(void)
-{
-	printk(KERN_INFO "IXDP2800: waiting for master NPU to enable us\n");
-
-	while ((*IXP2000_PCI_CMDSTAT & PCI_COMMAND_MASTER) == 0)
-		cpu_relax();
-}
-
-void __init ixdp2800_pci_preinit(void)
-{
-	printk("ixdp2x00_pci_preinit called\n");
-
-	*IXP2000_PCI_ADDR_EXT = 0x0001e000;
-
-	if (!ixdp2x00_master_npu())
-		ixdp2800_slave_disable_pci_master();
-
-	*IXP2000_PCI_SRAM_BASE_ADDR_MASK = (0x2000000 - 1) & ~0x3ffff;
-	*IXP2000_PCI_DRAM_BASE_ADDR_MASK = (0x40000000 - 1) & ~0xfffff;
-
-	ixp2000_pci_preinit();
-
-	if (ixdp2x00_master_npu()) {
-		/*
-		 * Wait until the slave set its SRAM/SDRAM BAR sizes
-		 * correctly before we proceed to scan and enumerate
-		 * the bus.
-		 */
-		ixdp2800_master_wait_for_slave();
-
-		/*
-		 * We configure the SDRAM BARs by hand because they
-		 * are 1G and fall outside of the regular allocated
-		 * PCI address space.
-		 */
-		*IXP2000_PCI_SDRAM_BAR = 0x00000008;
-	} else {
-		/*
-		 * Wait for the master to complete scanning the bus
-		 * and assigning resources before we proceed to scan
-		 * the bus ourselves.  Set pci=firmware to honor the
-		 * master's resource assignment.
-		 */
-		ixdp2800_slave_wait_for_master_enable();
-		pcibios_setup("firmware");
-	}
-}
-
-/*
- * We assign the SDRAM BARs for the two IXP2800 CPUs by hand, outside
- * of the regular PCI window, because there's only 512M of outbound PCI
- * memory window on each IXP, while we need 1G for each of the BARs.
- */
-static void __devinit ixp2800_pci_fixup(struct pci_dev *dev)
-{
-	if (machine_is_ixdp2800()) {
-		dev->resource[2].start = 0;
-		dev->resource[2].end   = 0;
-		dev->resource[2].flags = 0;
-	}
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IXP2800, ixp2800_pci_fixup);
-
-static int __init ixdp2800_pci_setup(int nr, struct pci_sys_data *sys)
-{
-	sys->mem_offset = 0x00000000;
-
-	ixp2000_pci_setup(nr, sys);
-
-	return 1;
-}
-
-static int __init ixdp2800_pci_map_irq(const struct pci_dev *dev, u8 slot,
-	u8 pin)
-{
-	if (ixdp2x00_master_npu()) {
-
-		/*
-		 * Root bus devices.  Slave NPU is only one with interrupt.
-		 * Everything else, we just return -1 which is invalid.
-		 */
-		if(!dev->bus->self) {
-			if(dev->devfn == IXDP2X00_SLAVE_NPU_DEVFN )
-				return IRQ_IXDP2800_INGRESS_NPU;
-
-			return -1;
-		}
-
-		/*
-		 * Bridge behind the PMC slot.
-		 */
-		if(dev->bus->self->devfn == IXDP2X00_PMC_DEVFN &&
-			dev->bus->parent->self->devfn == IXDP2X00_P2P_DEVFN &&
-			!dev->bus->parent->self->bus->parent)
-				  return IRQ_IXDP2800_PMC;
-
-		/*
-		 * Device behind the first bridge
-		 */
-		if(dev->bus->self->devfn == IXDP2X00_P2P_DEVFN) {
-			switch(dev->devfn) {
-				case IXDP2X00_PMC_DEVFN:
-					return IRQ_IXDP2800_PMC;	
-			
-				case IXDP2800_MASTER_ENET_DEVFN:
-					return IRQ_IXDP2800_EGRESS_ENET;
-
-				case IXDP2800_SWITCH_FABRIC_DEVFN:
-					return IRQ_IXDP2800_FABRIC;
-			}
-		}
-
-		return -1;
-	} else return IRQ_IXP2000_PCIB; /* Slave NIC interrupt */
-}
-
-static void __init ixdp2800_master_enable_slave(void)
-{
-	volatile u32 *addr;
-
-	printk(KERN_INFO "IXDP2800: enabling slave NPU\n");
-
-	addr = (volatile u32 *)ixp2000_pci_config_addr(0,
-					IXDP2X00_SLAVE_NPU_DEVFN,
-					PCI_COMMAND);
-
-	*addr |= PCI_COMMAND_MASTER;
-}
-
-static void __init ixdp2800_master_wait_for_slave_bus_scan(void)
-{
-	volatile u32 *addr;
-
-	printk(KERN_INFO "IXDP2800: waiting for slave to finish bus scan\n");
-
-	addr = (volatile u32 *)ixp2000_pci_config_addr(0,
-					IXDP2X00_SLAVE_NPU_DEVFN,
-					PCI_COMMAND);
-	while ((*addr & PCI_COMMAND_MEMORY) == 0)
-		cpu_relax();
-}
-
-static void __init ixdp2800_slave_signal_bus_scan_completion(void)
-{
-	printk(KERN_INFO "IXDP2800: bus scan done, signaling master\n");
-	*IXP2000_PCI_CMDSTAT |= PCI_COMMAND_MEMORY;
-}
-
-static void __init ixdp2800_pci_postinit(void)
-{
-	if (!ixdp2x00_master_npu()) {
-		ixdp2x00_slave_pci_postinit();
-		ixdp2800_slave_signal_bus_scan_completion();
-	}
-}
-
-struct __initdata hw_pci ixdp2800_pci __initdata = {
-	.nr_controllers	= 1,
-	.setup		= ixdp2800_pci_setup,
-	.preinit	= ixdp2800_pci_preinit,
-	.postinit	= ixdp2800_pci_postinit,
-	.scan		= ixp2000_pci_scan_bus,
-	.map_irq	= ixdp2800_pci_map_irq,
-};
-
-int __init ixdp2800_pci_init(void)
-{
-	if (machine_is_ixdp2800()) {
-		struct pci_dev *dev;
-
-		pci_common_init(&ixdp2800_pci);
-		if (ixdp2x00_master_npu()) {
-			dev = pci_get_bus_and_slot(1, IXDP2800_SLAVE_ENET_DEVFN);
-			pci_stop_and_remove_bus_device(dev);
-			pci_dev_put(dev);
-
-			ixdp2800_master_enable_slave();
-			ixdp2800_master_wait_for_slave_bus_scan();
-		} else {
-			dev = pci_get_bus_and_slot(1, IXDP2800_MASTER_ENET_DEVFN);
-			pci_stop_and_remove_bus_device(dev);
-			pci_dev_put(dev);
-		}
-	}
-
-	return 0;
-}
-
-subsys_initcall(ixdp2800_pci_init);
-
-void __init ixdp2800_init_irq(void)
-{
-	ixdp2x00_init_irq(IXDP2800_CPLD_INT_STAT, IXDP2800_CPLD_INT_MASK, IXDP2800_NR_IRQS);
-}
-
-MACHINE_START(IXDP2800, "Intel IXDP2800 Development Platform")
-	/* Maintainer: MontaVista Software, Inc. */
-	.atag_offset	= 0x100,
-	.map_io		= ixdp2x00_map_io,
-	.init_irq	= ixdp2800_init_irq,
-	.timer		= &ixdp2800_timer,
-	.init_machine	= ixdp2x00_init_machine,
-	.restart	= ixp2000_restart,
-MACHINE_END
-
diff --git a/arch/arm/mach-ixp2000/ixdp2x00.c b/arch/arm/mach-ixp2000/ixdp2x00.c
deleted file mode 100644
index 421e38dc0fac..000000000000
--- a/arch/arm/mach-ixp2000/ixdp2x00.c
+++ /dev/null
@@ -1,306 +0,0 @@
-/*
- * arch/arm/mach-ixp2000/ixdp2x00.c
- *
- * Code common to IXDP2400 and IXDP2800 platforms.
- *
- * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002 Intel Corp.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/bitops.h>
-#include <linux/pci.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/pci.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/arch.h>
-
-#include <mach/gpio-ixp2000.h>
-
-/*************************************************************************
- * IXDP2x00 IRQ Initialization
- *************************************************************************/
-static volatile unsigned long *board_irq_mask;
-static volatile unsigned long *board_irq_stat;
-static unsigned long board_irq_count;
-
-#ifdef CONFIG_ARCH_IXDP2400
-/*
- * Slowport configuration for accessing CPLD registers on IXDP2x00
- */
-static struct slowport_cfg slowport_cpld_cfg = {
-	.CCR =	SLOWPORT_CCR_DIV_2,
-	.WTC = 0x00000070,
-	.RTC = 0x00000070,
-	.PCR = SLOWPORT_MODE_FLASH,
-	.ADC = SLOWPORT_ADDR_WIDTH_24 | SLOWPORT_DATA_WIDTH_8
-};
-#endif
-
-static void ixdp2x00_irq_mask(struct irq_data *d)
-{
-	unsigned long dummy;
-	static struct slowport_cfg old_cfg;
-
-	/*
-	 * This is ugly in common code but really don't know
-	 * of a better way to handle it. :(
-	 */
-#ifdef CONFIG_ARCH_IXDP2400
-	if (machine_is_ixdp2400())
-		ixp2000_acquire_slowport(&slowport_cpld_cfg, &old_cfg);
-#endif
-
-	dummy = *board_irq_mask;
-	dummy |=  IXP2000_BOARD_IRQ_MASK(d->irq);
-	ixp2000_reg_wrb(board_irq_mask, dummy);
-
-#ifdef CONFIG_ARCH_IXDP2400
-	if (machine_is_ixdp2400())
-		ixp2000_release_slowport(&old_cfg);
-#endif
-}
-
-static void ixdp2x00_irq_unmask(struct irq_data *d)
-{
-	unsigned long dummy;
-	static struct slowport_cfg old_cfg;
-
-#ifdef CONFIG_ARCH_IXDP2400
-	if (machine_is_ixdp2400())
-		ixp2000_acquire_slowport(&slowport_cpld_cfg, &old_cfg);
-#endif
-
-	dummy = *board_irq_mask;
-	dummy &=  ~IXP2000_BOARD_IRQ_MASK(d->irq);
-	ixp2000_reg_wrb(board_irq_mask, dummy);
-
-	if (machine_is_ixdp2400()) 
-		ixp2000_release_slowport(&old_cfg);
-}
-
-static void ixdp2x00_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
-        volatile u32 ex_interrupt = 0;
-	static struct slowport_cfg old_cfg;
-	int i;
-
-	desc->irq_data.chip->irq_mask(&desc->irq_data);
-
-#ifdef CONFIG_ARCH_IXDP2400
-	if (machine_is_ixdp2400())
-		ixp2000_acquire_slowport(&slowport_cpld_cfg, &old_cfg);
-#endif
-        ex_interrupt = *board_irq_stat & 0xff;
-	if (machine_is_ixdp2400())
-		ixp2000_release_slowport(&old_cfg);
-
-	if(!ex_interrupt) {
-		printk(KERN_ERR "Spurious IXDP2x00 CPLD interrupt!\n");
-		return;
-	}
-
-	for(i = 0; i < board_irq_count; i++) {
-		if(ex_interrupt & (1 << i))  {
-			int cpld_irq = IXP2000_BOARD_IRQ(0) + i;
-			generic_handle_irq(cpld_irq);
-		}
-	}
-
-	desc->irq_data.chip->irq_unmask(&desc->irq_data);
-}
-
-static struct irq_chip ixdp2x00_cpld_irq_chip = {
-	.irq_ack	= ixdp2x00_irq_mask,
-	.irq_mask	= ixdp2x00_irq_mask,
-	.irq_unmask	= ixdp2x00_irq_unmask
-};
-
-void __init ixdp2x00_init_irq(volatile unsigned long *stat_reg, volatile unsigned long *mask_reg, unsigned long nr_of_irqs)
-{
-	unsigned int irq;
-
-	ixp2000_init_irq();
-	
-	if (!ixdp2x00_master_npu())
-		return;
-
-	board_irq_stat = stat_reg;
-	board_irq_mask = mask_reg;
-	board_irq_count = nr_of_irqs;
-
-	*board_irq_mask = 0xffffffff;
-
-	for(irq = IXP2000_BOARD_IRQ(0); irq < IXP2000_BOARD_IRQ(board_irq_count); irq++) {
-		irq_set_chip_and_handler(irq, &ixdp2x00_cpld_irq_chip,
-					 handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID);
-	}
-
-	/* Hook into PCI interrupt */
-	irq_set_chained_handler(IRQ_IXP2000_PCIB, ixdp2x00_irq_handler);
-}
-
-/*************************************************************************
- * IXDP2x00 memory map
- *************************************************************************/
-static struct map_desc ixdp2x00_io_desc __initdata = {
-	.virtual	= IXDP2X00_VIRT_CPLD_BASE, 
-	.pfn		= __phys_to_pfn(IXDP2X00_PHYS_CPLD_BASE),
-	.length		= IXDP2X00_CPLD_SIZE,
-	.type		= MT_DEVICE
-};
-
-void __init ixdp2x00_map_io(void)
-{
-	ixp2000_map_io();	
-
-	iotable_init(&ixdp2x00_io_desc, 1);
-}
-
-/*************************************************************************
- * IXDP2x00-common PCI init
- *
- * The IXDP2[48]00 has a horrid PCI bus layout. Basically the board 
- * contains two NPUs (ingress and egress) connected over PCI,  both running 
- * instances  of the kernel. So far so good. Peers on the PCI bus running 
- * Linux is a common design in telecom systems. The problem is that instead 
- * of all the devices being controlled by a single host, different
- * devices are controlled by different NPUs on the same bus, leading to
- * multiple hosts on the bus. The exact bus layout looks like:
- *
- *                   Bus 0
- *    Master NPU <-------------------+-------------------> Slave NPU
- *                                   |
- *                                   |
- *                                  P2P 
- *                                   |
- *
- *                  Bus 1            |
- *               <--+------+---------+---------+------+-->
- *                  |      |         |         |      |
- *                  |      |         |         |      |
- *             ... Dev    PMC       Media     Eth0   Eth1 ...
- *
- * The master controls all but Eth1, which is controlled by the
- * slave. What this means is that the both the master and the slave
- * have to scan the bus, but only one of them can enumerate the bus.
- * In addition, after the bus is scanned, each kernel must remove
- * the device(s) it does not control from the PCI dev list otherwise
- * a driver on each NPU will try to manage it and we will have horrible
- * conflicts. Oh..and the slave NPU needs to see the master NPU
- * for Intel's drivers to work properly. Closed source drivers...
- *
- * The way we deal with this is fairly simple but ugly:
- *
- * 1) Let master scan and enumerate the bus completely.
- * 2) Master deletes Eth1 from device list.
- * 3) Slave scans bus and then deletes all but Eth1 (Eth0 on slave)
- *    from device list.
- * 4) Find HW designers and LART them.
- *
- * The boards also do not do normal PCI IRQ routing, or any sort of 
- * sensical  swizzling, so we just need to check where on the  bus a
- * device sits and figure out to which CPLD pin the interrupt is routed.
- * See ixdp2[48]00.c files.
- *
- *************************************************************************/
-void ixdp2x00_slave_pci_postinit(void)
-{
-	struct pci_dev *dev;
-
-	/*
-	 * Remove PMC device is there is one
-	 */
-	if((dev = pci_get_bus_and_slot(1, IXDP2X00_PMC_DEVFN))) {
-		pci_stop_and_remove_bus_device(dev);
-		pci_dev_put(dev);
-	}
-
-	dev = pci_get_bus_and_slot(0, IXDP2X00_21555_DEVFN);
-	pci_stop_and_remove_bus_device(dev);
-	pci_dev_put(dev);
-}
-
-/**************************************************************************
- * IXDP2x00 Machine Setup
- *************************************************************************/
-static struct flash_platform_data ixdp2x00_platform_data = {
-	.map_name	= "cfi_probe",
-	.width		= 1,
-};
-
-static struct ixp2000_flash_data ixdp2x00_flash_data = {
-	.platform_data	= &ixdp2x00_platform_data,
-	.nr_banks	= 1
-};
-
-static struct resource ixdp2x00_flash_resource = {
-	.start		= 0xc4000000,
-	.end		= 0xc4000000 + 0x00ffffff,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device ixdp2x00_flash = {
-	.name		= "IXP2000-Flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &ixdp2x00_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &ixdp2x00_flash_resource,
-};
-
-static struct ixp2000_i2c_pins ixdp2x00_i2c_gpio_pins = {
-	.sda_pin	= IXDP2X00_GPIO_SDA,
-	.scl_pin	= IXDP2X00_GPIO_SCL,
-};
-
-static struct platform_device ixdp2x00_i2c_controller = {
-	.name		= "IXP2000-I2C",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &ixdp2x00_i2c_gpio_pins,
-	},
-	.num_resources	= 0
-};
-
-static struct platform_device *ixdp2x00_devices[] __initdata = {
-	&ixdp2x00_flash,
-	&ixdp2x00_i2c_controller
-};
-
-void __init ixdp2x00_init_machine(void)
-{
-	gpio_line_set(IXDP2X00_GPIO_I2C_ENABLE, 1);
-	gpio_line_config(IXDP2X00_GPIO_I2C_ENABLE, GPIO_OUT);
-
-	platform_add_devices(ixdp2x00_devices, ARRAY_SIZE(ixdp2x00_devices));
-	ixp2000_uart_init();
-}
-
diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c
deleted file mode 100644
index 5196c39cdba4..000000000000
--- a/arch/arm/mach-ixp2000/ixdp2x01.c
+++ /dev/null
@@ -1,483 +0,0 @@
-/*
- * arch/arm/mach-ixp2000/ixdp2x01.c
- *
- * Code common to Intel IXDP2401 and IXDP2801 platforms
- *
- * Original Author: Andrzej Mialkowski <andrzej.mialkowski@intel.com>
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002-2003 Intel Corp.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/bitops.h>
-#include <linux/pci.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/pci.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-
-/*************************************************************************
- * IXDP2x01 IRQ Handling
- *************************************************************************/
-static void ixdp2x01_irq_mask(struct irq_data *d)
-{
-	ixp2000_reg_wrb(IXDP2X01_INT_MASK_SET_REG,
-				IXP2000_BOARD_IRQ_MASK(d->irq));
-}
-
-static void ixdp2x01_irq_unmask(struct irq_data *d)
-{
-	ixp2000_reg_write(IXDP2X01_INT_MASK_CLR_REG,
-				IXP2000_BOARD_IRQ_MASK(d->irq));
-}
-
-static u32 valid_irq_mask;
-
-static void ixdp2x01_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
-	u32 ex_interrupt;
-	int i;
-
-	desc->irq_data.chip->irq_mask(&desc->irq_data);
-
-	ex_interrupt = *IXDP2X01_INT_STAT_REG & valid_irq_mask;
-
-	if (!ex_interrupt) {
-		printk(KERN_ERR "Spurious IXDP2X01 CPLD interrupt!\n");
-		return;
-	}
-
-	for (i = 0; i < IXP2000_BOARD_IRQS; i++) {
-		if (ex_interrupt & (1 << i)) {
-			int cpld_irq = IXP2000_BOARD_IRQ(0) + i;
-			generic_handle_irq(cpld_irq);
-		}
-	}
-
-	desc->irq_data.chip->irq_unmask(&desc->irq_data);
-}
-
-static struct irq_chip ixdp2x01_irq_chip = {
-	.irq_mask	= ixdp2x01_irq_mask,
-	.irq_ack	= ixdp2x01_irq_mask,
-	.irq_unmask	= ixdp2x01_irq_unmask
-};
-
-/*
- * We only do anything if we are the master NPU on the board.
- * The slave NPU only has the ethernet chip going directly to
- * the PCIB interrupt input.
- */
-void __init ixdp2x01_init_irq(void)
-{
-	int irq = 0;
-
-	/* initialize chip specific interrupts */
-	ixp2000_init_irq();
-
-	if (machine_is_ixdp2401())
-		valid_irq_mask = IXDP2401_VALID_IRQ_MASK;
-	else
-		valid_irq_mask = IXDP2801_VALID_IRQ_MASK;
-
-	/* Mask all interrupts from CPLD, disable simulation */
-	ixp2000_reg_write(IXDP2X01_INT_MASK_SET_REG, 0xffffffff);
-	ixp2000_reg_wrb(IXDP2X01_INT_SIM_REG, 0);
-
-	for (irq = NR_IXP2000_IRQS; irq < NR_IXDP2X01_IRQS; irq++) {
-		if (irq & valid_irq_mask) {
-			irq_set_chip_and_handler(irq, &ixdp2x01_irq_chip,
-						 handle_level_irq);
-			set_irq_flags(irq, IRQF_VALID);
-		} else {
-			set_irq_flags(irq, 0);
-		}
-	}
-
-	/* Hook into PCI interrupts */
-	irq_set_chained_handler(IRQ_IXP2000_PCIB, ixdp2x01_irq_handler);
-}
-
-
-/*************************************************************************
- * IXDP2x01 memory map
- *************************************************************************/
-static struct map_desc ixdp2x01_io_desc __initdata = {
-	.virtual	= IXDP2X01_VIRT_CPLD_BASE, 
-	.pfn		= __phys_to_pfn(IXDP2X01_PHYS_CPLD_BASE),
-	.length		= IXDP2X01_CPLD_REGION_SIZE,
-	.type		= MT_DEVICE
-};
-
-static void __init ixdp2x01_map_io(void)
-{
-	ixp2000_map_io();
-	iotable_init(&ixdp2x01_io_desc, 1);
-}
-
-
-/*************************************************************************
- * IXDP2x01 serial ports
- *************************************************************************/
-static struct plat_serial8250_port ixdp2x01_serial_port1[] = {
-	{
-		.mapbase	= (unsigned long)IXDP2X01_UART1_PHYS_BASE,
-		.membase	= (char *)IXDP2X01_UART1_VIRT_BASE,
-		.irq		= IRQ_IXDP2X01_UART1,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM32,
-		.regshift	= 2,
-		.uartclk	= IXDP2X01_UART_CLK,
-	},
-	{ }
-};
-
-static struct resource ixdp2x01_uart_resource1 = {
-	.start		= IXDP2X01_UART1_PHYS_BASE,
-	.end		= IXDP2X01_UART1_PHYS_BASE + 0xffff,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device ixdp2x01_serial_device1 = {
-	.name		= "serial8250",
-	.id		= PLAT8250_DEV_PLATFORM1,
-	.dev		= {
-		.platform_data		= ixdp2x01_serial_port1,
-	},
-	.num_resources	= 1,
-	.resource	= &ixdp2x01_uart_resource1,
-};
-
-static struct plat_serial8250_port ixdp2x01_serial_port2[] = {
-	{
-		.mapbase	= (unsigned long)IXDP2X01_UART2_PHYS_BASE,
-		.membase	= (char *)IXDP2X01_UART2_VIRT_BASE,
-		.irq		= IRQ_IXDP2X01_UART2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM32,
-		.regshift	= 2,
-		.uartclk	= IXDP2X01_UART_CLK,
-	}, 
-	{ }
-};
-
-static struct resource ixdp2x01_uart_resource2 = {
-	.start		= IXDP2X01_UART2_PHYS_BASE,
-	.end		= IXDP2X01_UART2_PHYS_BASE + 0xffff,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device ixdp2x01_serial_device2 = {
-	.name		= "serial8250",
-	.id		= PLAT8250_DEV_PLATFORM2,
-	.dev		= {
-		.platform_data		= ixdp2x01_serial_port2,
-	},
-	.num_resources	= 1,
-	.resource	= &ixdp2x01_uart_resource2,
-};
-
-static void ixdp2x01_uart_init(void)
-{
-	platform_device_register(&ixdp2x01_serial_device1);
-	platform_device_register(&ixdp2x01_serial_device2);
-}
-
-
-/*************************************************************************
- * IXDP2x01 timer tick configuration
- *************************************************************************/
-static unsigned int ixdp2x01_clock;
-
-static int __init ixdp2x01_clock_setup(char *str)
-{
-	ixdp2x01_clock = simple_strtoul(str, NULL, 10);
-
-	return 1;
-}
-
-__setup("ixdp2x01_clock=", ixdp2x01_clock_setup);
-
-static void __init ixdp2x01_timer_init(void)
-{
-	if (!ixdp2x01_clock)
-		ixdp2x01_clock = 50000000;
-
-	ixp2000_init_time(ixdp2x01_clock);
-}
-
-static struct sys_timer ixdp2x01_timer = {
-	.init		= ixdp2x01_timer_init,
-	.offset		= ixp2000_gettimeoffset,
-};
-
-/*************************************************************************
- * IXDP2x01 PCI
- *************************************************************************/
-void __init ixdp2x01_pci_preinit(void)
-{
-	ixp2000_reg_write(IXP2000_PCI_ADDR_EXT, 0x00000000);
-	ixp2000_pci_preinit();
-	pcibios_setup("firmware");
-}
-
-#define DEVPIN(dev, pin) ((pin) | ((dev) << 3))
-
-static int __init ixdp2x01_pci_map_irq(const struct pci_dev *dev, u8 slot,
-	u8 pin)
-{
-	u8 bus = dev->bus->number;
-	u32 devpin = DEVPIN(PCI_SLOT(dev->devfn), pin);
-	struct pci_bus *tmp_bus = dev->bus;
-
-	/* Primary bus, no interrupts here */
-	if (bus == 0) {
-		return -1;
-	}
-
-	/* Lookup first leaf in bus tree */
-	while ((tmp_bus->parent != NULL) && (tmp_bus->parent->parent != NULL)) {
-		tmp_bus = tmp_bus->parent;
-	}
-
-	/* Select between known bridges */
-	switch (tmp_bus->self->devfn | (tmp_bus->self->bus->number << 8)) {
-	/* Device is located after first MB bridge */
-	case 0x0008:
-		if (tmp_bus == dev->bus) {
-			/* Device is located directly after first MB bridge */
-			switch (devpin) {
-			case DEVPIN(1, 1):	/* Onboard 82546 ch 0 */
-				if (machine_is_ixdp2401())
-					return IRQ_IXDP2401_INTA_82546;
-				return -1;
-			case DEVPIN(1, 2):	/* Onboard 82546 ch 1 */
-				if (machine_is_ixdp2401())
-					return IRQ_IXDP2401_INTB_82546;
-				return -1;
-			case DEVPIN(0, 1):	/* PMC INTA# */
-				return IRQ_IXDP2X01_SPCI_PMC_INTA;
-			case DEVPIN(0, 2):	/* PMC INTB# */
-				return IRQ_IXDP2X01_SPCI_PMC_INTB;
-			case DEVPIN(0, 3):	/* PMC INTC# */
-				return IRQ_IXDP2X01_SPCI_PMC_INTC;
-			case DEVPIN(0, 4):	/* PMC INTD# */
-				return IRQ_IXDP2X01_SPCI_PMC_INTD;
-			}
-		}
-		break;
-	case 0x0010:
-		if (tmp_bus == dev->bus) {
-			/* Device is located directly after second MB bridge */
-			/* Secondary bus of second bridge */
-			switch (devpin) {
-			case DEVPIN(0, 1):	/* DB#0 */
-				return IRQ_IXDP2X01_SPCI_DB_0;
-			case DEVPIN(1, 1):	/* DB#1 */
-				return IRQ_IXDP2X01_SPCI_DB_1;
-			}
-		} else {
-			/* Device is located indirectly after second MB bridge */
-			/* Not supported now */
-		}
-		break;
-	}
-
-	return -1;
-}
-
-
-static int ixdp2x01_pci_setup(int nr, struct pci_sys_data *sys)
-{
-	sys->mem_offset = 0xe0000000;
-
-	if (machine_is_ixdp2801() || machine_is_ixdp28x5())
-		sys->mem_offset -= ((*IXP2000_PCI_ADDR_EXT & 0xE000) << 16);
-
-	return ixp2000_pci_setup(nr, sys);
-}
-
-struct hw_pci ixdp2x01_pci __initdata = {
-	.nr_controllers	= 1,
-	.setup		= ixdp2x01_pci_setup,
-	.preinit	= ixdp2x01_pci_preinit,
-	.scan		= ixp2000_pci_scan_bus,
-	.map_irq	= ixdp2x01_pci_map_irq,
-};
-
-int __init ixdp2x01_pci_init(void)
-{
-	if (machine_is_ixdp2401() || machine_is_ixdp2801() ||\
-		machine_is_ixdp28x5())
-		pci_common_init(&ixdp2x01_pci);
-
-	return 0;
-}
-
-subsys_initcall(ixdp2x01_pci_init);
-
-/*************************************************************************
- * IXDP2x01 Machine Initialization
- *************************************************************************/
-static struct flash_platform_data ixdp2x01_flash_platform_data = {
-	.map_name	= "cfi_probe",
-	.width		= 1,
-};
-
-static unsigned long ixdp2x01_flash_bank_setup(unsigned long ofs)
-{
-	ixp2000_reg_wrb(IXDP2X01_CPLD_FLASH_REG,
-		((ofs >> IXDP2X01_FLASH_WINDOW_BITS) | IXDP2X01_CPLD_FLASH_INTERN));
-	return (ofs & IXDP2X01_FLASH_WINDOW_MASK);
-}
-
-static struct ixp2000_flash_data ixdp2x01_flash_data = {
-	.platform_data	= &ixdp2x01_flash_platform_data,
-	.bank_setup	= ixdp2x01_flash_bank_setup
-};
-
-static struct resource ixdp2x01_flash_resource = {
-	.start		= 0xc4000000,
-	.end		= 0xc4000000 + 0x01ffffff,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device ixdp2x01_flash = {
-	.name		= "IXP2000-Flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &ixdp2x01_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &ixdp2x01_flash_resource,
-};
-
-static struct ixp2000_i2c_pins ixdp2x01_i2c_gpio_pins = {
-	.sda_pin	= IXDP2X01_GPIO_SDA,
-	.scl_pin	= IXDP2X01_GPIO_SCL,
-};
-
-static struct platform_device ixdp2x01_i2c_controller = {
-	.name		= "IXP2000-I2C",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &ixdp2x01_i2c_gpio_pins,
-	},
-	.num_resources	= 0
-};
-
-static struct platform_device *ixdp2x01_devices[] __initdata = {
-	&ixdp2x01_flash,
-	&ixdp2x01_i2c_controller
-};
-
-static void __init ixdp2x01_init_machine(void)
-{
-	ixp2000_reg_wrb(IXDP2X01_CPLD_FLASH_REG,
-		(IXDP2X01_CPLD_FLASH_BANK_MASK | IXDP2X01_CPLD_FLASH_INTERN));
-	
-	ixdp2x01_flash_data.nr_banks =
-		((*IXDP2X01_CPLD_FLASH_REG & IXDP2X01_CPLD_FLASH_BANK_MASK) + 1);
-
-	platform_add_devices(ixdp2x01_devices, ARRAY_SIZE(ixdp2x01_devices));
-	ixp2000_uart_init();
-	ixdp2x01_uart_init();
-}
-
-static void ixdp2401_restart(char mode, const char *cmd)
-{
-	/*
-	 * Reset flash banking register so that we are pointing at
-	 * RedBoot bank.
-	 */
-	ixp2000_reg_write(IXDP2X01_CPLD_FLASH_REG,
-				((0 >> IXDP2X01_FLASH_WINDOW_BITS)
-					| IXDP2X01_CPLD_FLASH_INTERN));
-	ixp2000_reg_wrb(IXDP2X01_CPLD_RESET_REG, 0xffffffff);
-
-	ixp2000_restart(mode, cmd);
-}
-
-static void ixdp280x_restart(char mode, const char *cmd)
-{
-	/*
-	 * On IXDP2801 we need to write this magic sequence to the CPLD
-	 * to cause a complete reset of the CPU and all external devices
-	 * and move the flash bank register back to 0.
-	 */
-	unsigned long reset_reg = *IXDP2X01_CPLD_RESET_REG;
-
-	reset_reg = 0x55AA0000 | (reset_reg & 0x0000FFFF);
-	ixp2000_reg_write(IXDP2X01_CPLD_RESET_REG, reset_reg);
-	ixp2000_reg_wrb(IXDP2X01_CPLD_RESET_REG, 0x80000000);
-
-	ixp2000_restart(mode, cmd);
-}
-
-#ifdef CONFIG_ARCH_IXDP2401
-MACHINE_START(IXDP2401, "Intel IXDP2401 Development Platform")
-	/* Maintainer: MontaVista Software, Inc. */
-	.atag_offset	= 0x100,
-	.map_io		= ixdp2x01_map_io,
-	.init_irq	= ixdp2x01_init_irq,
-	.timer		= &ixdp2x01_timer,
-	.init_machine	= ixdp2x01_init_machine,
-	.restart	= ixdp2401_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_ARCH_IXDP2801
-MACHINE_START(IXDP2801, "Intel IXDP2801 Development Platform")
-	/* Maintainer: MontaVista Software, Inc. */
-	.atag_offset	= 0x100,
-	.map_io		= ixdp2x01_map_io,
-	.init_irq	= ixdp2x01_init_irq,
-	.timer		= &ixdp2x01_timer,
-	.init_machine	= ixdp2x01_init_machine,
-	.restart	= ixdp280x_restart,
-MACHINE_END
-
-/*
- * IXDP28x5 is basically an IXDP2801 with a different CPU but Intel
- * changed the machine ID in the bootloader
- */
-MACHINE_START(IXDP28X5, "Intel IXDP2805/2855 Development Platform")
-	/* Maintainer: MontaVista Software, Inc. */
-	.atag_offset	= 0x100,
-	.map_io		= ixdp2x01_map_io,
-	.init_irq	= ixdp2x01_init_irq,
-	.timer		= &ixdp2x01_timer,
-	.init_machine	= ixdp2x01_init_machine,
-	.restart	= ixdp280x_restart,
-MACHINE_END
-#endif
-
-
diff --git a/arch/arm/mach-ixp2000/pci.c b/arch/arm/mach-ixp2000/pci.c
deleted file mode 100644
index 9c02de932fac..000000000000
--- a/arch/arm/mach-ixp2000/pci.c
+++ /dev/null
@@ -1,252 +0,0 @@
-/*
- * arch/arm/mach-ixp2000/pci.c
- *
- * PCI routines for IXDP2400/IXDP2800 boards
- *
- * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
- * Maintained by: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2002 Intel Corp.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <mach/hardware.h>
-
-#include <asm/mach/pci.h>
-
-static volatile int pci_master_aborts = 0;
-
-static int clear_master_aborts(void);
-
-u32 *
-ixp2000_pci_config_addr(unsigned int bus_nr, unsigned int devfn, int where)
-{
-	u32 *paddress;
-
-	if (PCI_SLOT(devfn) > 7)
-		return 0;
-
-	/* Must be dword aligned */
-	where &= ~3;
-
-	/*
-	 * For top bus, generate type 0, else type 1
-	 */
-	if (!bus_nr) {
-		/* only bits[23:16] are used for IDSEL */
-		paddress = (u32 *) (IXP2000_PCI_CFG0_VIRT_BASE
-				    | (1 << (PCI_SLOT(devfn) + 16))
-				    | (PCI_FUNC(devfn) << 8) | where);
-	} else {
-		paddress = (u32 *) (IXP2000_PCI_CFG1_VIRT_BASE 
-				    | (bus_nr << 16)
-				    | (PCI_SLOT(devfn) << 11)
-				    | (PCI_FUNC(devfn) << 8) | where);
-	}
-
-	return paddress;
-}
-
-/*
- * Mask table, bits to mask for quantity of size 1, 2 or 4 bytes.
- * 0 and 3 are not valid indexes...
- */
-static u32 bytemask[] = {
-	/*0*/	0,
-	/*1*/	0xff,
-	/*2*/	0xffff,
-	/*3*/	0,
-	/*4*/	0xffffffff,
-};
-
-
-int ixp2000_pci_read_config(struct pci_bus *bus, unsigned int devfn, int where,
-				int size, u32 *value)
-{
-	u32 n;
-	u32 *addr;
-
-	n = where % 4;
-
-	addr = ixp2000_pci_config_addr(bus->number, devfn, where);
-	if (!addr)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	pci_master_aborts = 0;
-	*value = (*addr >> (8*n)) & bytemask[size];
-	if (pci_master_aborts) {
-		pci_master_aborts = 0;
-		*value = 0xffffffff;
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-/*
- * We don't do error checks by calling clear_master_aborts() b/c the
- * assumption is that the caller did a read first to make sure a device
- * exists.
- */
-int ixp2000_pci_write_config(struct pci_bus *bus, unsigned int devfn, int where,
-				int size, u32 value)
-{
-	u32 mask;
-	u32 *addr;
-	u32 temp;
-
-	mask = ~(bytemask[size] << ((where % 0x4) * 8));
-	addr = ixp2000_pci_config_addr(bus->number, devfn, where);
-	if (!addr)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	temp = (u32) (value) << ((where % 0x4) * 8);
-	*addr = (*addr & mask) | temp;
-
-	clear_master_aborts();
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-
-static struct pci_ops ixp2000_pci_ops = {
-	.read	= ixp2000_pci_read_config,
-	.write	= ixp2000_pci_write_config
-};
-
-struct pci_bus *ixp2000_pci_scan_bus(int nr, struct pci_sys_data *sysdata)
-{
-	return pci_scan_root_bus(NULL, sysdata->busnr, &ixp2000_pci_ops,
-				 sysdata, &sysdata->resources);
-}
-
-
-int ixp2000_pci_abort_handler(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
-{
-
-	volatile u32 temp;
-	unsigned long flags;
-
-	pci_master_aborts = 1;
-
-	local_irq_save(flags);
-	temp = *(IXP2000_PCI_CONTROL);
-	if (temp & ((1 << 8) | (1 << 5))) {
-		ixp2000_reg_wrb(IXP2000_PCI_CONTROL, temp);
-	}
-
-	temp = *(IXP2000_PCI_CMDSTAT);
-	if (temp & (1 << 29)) {
-		while (temp & (1 << 29)) {	
-			ixp2000_reg_write(IXP2000_PCI_CMDSTAT, temp);
-			temp = *(IXP2000_PCI_CMDSTAT);
-		}
-	}
-	local_irq_restore(flags);
-
-	/*
-	 * If it was an imprecise abort, then we need to correct the
-	 * return address to be _after_ the instruction.
-	 */
-	if (fsr & (1 << 10))
-		regs->ARM_pc += 4;
-
-	return 0;
-}
-
-int
-clear_master_aborts(void)
-{
-	volatile u32 temp;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	temp = *(IXP2000_PCI_CONTROL);
-	if (temp & ((1 << 8) | (1 << 5))) {
-		ixp2000_reg_wrb(IXP2000_PCI_CONTROL, temp);
-	}
-
-	temp = *(IXP2000_PCI_CMDSTAT);
-	if (temp & (1 << 29)) {
-		while (temp & (1 << 29)) {
-			ixp2000_reg_write(IXP2000_PCI_CMDSTAT, temp);
-			temp = *(IXP2000_PCI_CMDSTAT);
-		}
-	}
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-void __init
-ixp2000_pci_preinit(void)
-{
-	pci_set_flags(0);
-
-	pcibios_min_io = 0;
-	pcibios_min_mem = 0;
-
-#ifndef CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO
-	/*
-	 * Configure the PCI unit to properly byteswap I/O transactions,
-	 * and verify that it worked.
-	 */
-	ixp2000_reg_write(IXP2000_PCI_CONTROL,
-			  (*IXP2000_PCI_CONTROL | PCI_CONTROL_IEE));
-
-	if ((*IXP2000_PCI_CONTROL & PCI_CONTROL_IEE) == 0)
-		panic("IXP2000: PCI I/O is broken on this ixp model, and "
-			"the needed workaround has not been configured in");
-#endif
-
-	hook_fault_code(16+6, ixp2000_pci_abort_handler, SIGBUS, 0,
-				"PCI config cycle to non-existent device");
-}
-
-
-/*
- * IXP2000 systems often have large resource requirements, so we just
- * use our own resource space.
- */
-static struct resource ixp2000_pci_mem_space = {
-	.start	= 0xe0000000,
-	.end	= 0xffffffff,
-	.flags	= IORESOURCE_MEM,
-	.name	= "PCI Mem Space"
-};
-
-static struct resource ixp2000_pci_io_space = {
-	.start	= 0x00010000,
-	.end	= 0x0001ffff,
-	.flags	= IORESOURCE_IO,
-	.name	= "PCI I/O Space"
-};
-
-int ixp2000_pci_setup(int nr, struct pci_sys_data *sys)
-{
-	if (nr >= 1)
-		return 0;
-
-	pci_add_resource_offset(&sys->resources,
-				&ixp2000_pci_io_space, sys->io_offset);
-	pci_add_resource_offset(&sys->resources,
-				&ixp2000_pci_mem_space, sys->mem_offset);
-
-	return 1;
-}
-
diff --git a/arch/arm/mach-ixp23xx/Kconfig b/arch/arm/mach-ixp23xx/Kconfig
deleted file mode 100644
index 982670ec3866..000000000000
--- a/arch/arm/mach-ixp23xx/Kconfig
+++ /dev/null
@@ -1,25 +0,0 @@
-if ARCH_IXP23XX
-
-config ARCH_SUPPORTS_BIG_ENDIAN
-	bool
-	default y
-
-menu "Intel IXP23xx Implementation Options"
-
-comment "IXP23xx Platforms"
-
-config MACH_ESPRESSO
-	bool "Support IP Fabrics Double Espresso platform"
-	help
-
-config MACH_IXDP2351
-	bool "Support Intel IXDP2351 platform"
-	help
-
-config MACH_ROADRUNNER
-	bool "Support ADI RoadRunner platform"
-	help
-
-endmenu
-
-endif
diff --git a/arch/arm/mach-ixp23xx/Makefile b/arch/arm/mach-ixp23xx/Makefile
deleted file mode 100644
index 288b371b6d03..000000000000
--- a/arch/arm/mach-ixp23xx/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-obj-y			:= core.o pci.o
-obj-m			:=
-obj-n			:=
-obj-			:=
-
-obj-$(CONFIG_MACH_ESPRESSO)	+= espresso.o
-obj-$(CONFIG_MACH_IXDP2351)	+= ixdp2351.o
-obj-$(CONFIG_MACH_ROADRUNNER)	+= roadrunner.o
diff --git a/arch/arm/mach-ixp23xx/Makefile.boot b/arch/arm/mach-ixp23xx/Makefile.boot
deleted file mode 100644
index 44fb4a717c3f..000000000000
--- a/arch/arm/mach-ixp23xx/Makefile.boot
+++ /dev/null
@@ -1,2 +0,0 @@
-   zreladdr-y	+= 0x00008000
-params_phys-y	:= 0x00000100
diff --git a/arch/arm/mach-ixp23xx/core.c b/arch/arm/mach-ixp23xx/core.c
deleted file mode 100644
index d34542425990..000000000000
--- a/arch/arm/mach-ixp23xx/core.c
+++ /dev/null
@@ -1,455 +0,0 @@
-/*
- * arch/arm/mach-ixp23xx/core.c
- *
- * Core routines for IXP23xx chips
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2005 (c) MontaVista Software, Inc.
- *
- * Based on 2.4 code Copyright 2004 (c) Intel Corporation
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/bitops.h>
-#include <linux/serial_8250.h>
-#include <linux/serial_core.h>
-#include <linux/device.h>
-#include <linux/mm.h>
-#include <linux/time.h>
-#include <linux/timex.h>
-
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/tlbflush.h>
-#include <asm/pgtable.h>
-#include <asm/system_misc.h>
-
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/arch.h>
-
-
-/*************************************************************************
- * Chip specific mappings shared by all IXP23xx systems
- *************************************************************************/
-static struct map_desc ixp23xx_io_desc[] __initdata = {
-	{ /* XSI-CPP CSRs */
-	 	.virtual	= IXP23XX_XSI2CPP_CSR_VIRT,
-	 	.pfn		= __phys_to_pfn(IXP23XX_XSI2CPP_CSR_PHYS),
-	 	.length		= IXP23XX_XSI2CPP_CSR_SIZE,
-		.type		= MT_DEVICE,
-	}, { /* Expansion Bus Config */
-	 	.virtual	= IXP23XX_EXP_CFG_VIRT,
-	 	.pfn		= __phys_to_pfn(IXP23XX_EXP_CFG_PHYS),
-	 	.length		= IXP23XX_EXP_CFG_SIZE,
-		.type		= MT_DEVICE,
-	}, { /* UART, Interrupt ctrl, GPIO, timers, NPEs, MACS,.... */
-	 	.virtual	= IXP23XX_PERIPHERAL_VIRT,
-	 	.pfn		= __phys_to_pfn(IXP23XX_PERIPHERAL_PHYS),
-	 	.length		= IXP23XX_PERIPHERAL_SIZE,
-		.type		= MT_DEVICE,
-	}, { /* CAP CSRs */
-	 	.virtual	= IXP23XX_CAP_CSR_VIRT,
-	 	.pfn		= __phys_to_pfn(IXP23XX_CAP_CSR_PHYS),
-	 	.length		= IXP23XX_CAP_CSR_SIZE,
-		.type		= MT_DEVICE,
-	}, { /* MSF CSRs */
-	 	.virtual	= IXP23XX_MSF_CSR_VIRT,
-	 	.pfn		= __phys_to_pfn(IXP23XX_MSF_CSR_PHYS),
-	 	.length		= IXP23XX_MSF_CSR_SIZE,
-		.type		= MT_DEVICE,
-	}, { /* PCI I/O Space */
-	 	.virtual	= IXP23XX_PCI_IO_VIRT,
-	 	.pfn		= __phys_to_pfn(IXP23XX_PCI_IO_PHYS),
-	 	.length		= IXP23XX_PCI_IO_SIZE,
-		.type		= MT_DEVICE,
-	}, { /* PCI Config Space */
-	 	.virtual	= IXP23XX_PCI_CFG_VIRT,
-	 	.pfn		= __phys_to_pfn(IXP23XX_PCI_CFG_PHYS),
-	 	.length		= IXP23XX_PCI_CFG_SIZE,
-		.type		= MT_DEVICE,
-	}, { /* PCI local CFG CSRs */
-	 	.virtual	= IXP23XX_PCI_CREG_VIRT,
-	 	.pfn		= __phys_to_pfn(IXP23XX_PCI_CREG_PHYS),
-	 	.length		= IXP23XX_PCI_CREG_SIZE,
-		.type		= MT_DEVICE,
-	}, { /* PCI MEM Space */
-	 	.virtual	= IXP23XX_PCI_MEM_VIRT,
-	 	.pfn		= __phys_to_pfn(IXP23XX_PCI_MEM_PHYS),
-	 	.length		= IXP23XX_PCI_MEM_SIZE,
-		.type		= MT_DEVICE,
-	}
-};
-
-void __init ixp23xx_map_io(void)
-{
-	iotable_init(ixp23xx_io_desc, ARRAY_SIZE(ixp23xx_io_desc));
-}
-
-
-/***************************************************************************
- * IXP23xx Interrupt Handling
- ***************************************************************************/
-enum ixp23xx_irq_type {
-	IXP23XX_IRQ_LEVEL, IXP23XX_IRQ_EDGE
-};
-
-static void ixp23xx_config_irq(unsigned int, enum ixp23xx_irq_type);
-
-static int ixp23xx_irq_set_type(struct irq_data *d, unsigned int type)
-{
-	int line = d->irq - IRQ_IXP23XX_GPIO6 + 6;
-	u32 int_style;
-	enum ixp23xx_irq_type irq_type;
-	volatile u32 *int_reg;
-
-	/*
-	 * Only GPIOs 6-15 are wired to interrupts on IXP23xx
-	 */
-	if (line < 6 || line > 15)
-		return -EINVAL;
-
-	switch (type) {
-	case IRQ_TYPE_EDGE_BOTH:
-		int_style = IXP23XX_GPIO_STYLE_TRANSITIONAL;
-		irq_type = IXP23XX_IRQ_EDGE;
-		break;
-	case IRQ_TYPE_EDGE_RISING:
-		int_style = IXP23XX_GPIO_STYLE_RISING_EDGE;
-		irq_type = IXP23XX_IRQ_EDGE;
-		break;
-	case IRQ_TYPE_EDGE_FALLING:
-		int_style = IXP23XX_GPIO_STYLE_FALLING_EDGE;
-		irq_type = IXP23XX_IRQ_EDGE;
-		break;
-	case IRQ_TYPE_LEVEL_HIGH:
-		int_style = IXP23XX_GPIO_STYLE_ACTIVE_HIGH;
-		irq_type = IXP23XX_IRQ_LEVEL;
-		break;
-	case IRQ_TYPE_LEVEL_LOW:
-		int_style = IXP23XX_GPIO_STYLE_ACTIVE_LOW;
-		irq_type = IXP23XX_IRQ_LEVEL;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	ixp23xx_config_irq(d->irq, irq_type);
-
-	if (line >= 8) {	/* pins 8-15 */
-		line -= 8;
-		int_reg = (volatile u32 *)IXP23XX_GPIO_GPIT2R;
-	} else {		/* pins 0-7 */
-		int_reg = (volatile u32 *)IXP23XX_GPIO_GPIT1R;
-	}
-
-	/*
-	 * Clear pending interrupts
-	 */
-	*IXP23XX_GPIO_GPISR = (1 << line);
-
-	/* Clear the style for the appropriate pin */
-	*int_reg &= ~(IXP23XX_GPIO_STYLE_MASK <<
-			(line * IXP23XX_GPIO_STYLE_SIZE));
-
-	/* Set the new style */
-	*int_reg |= (int_style << (line * IXP23XX_GPIO_STYLE_SIZE));
-
-	return 0;
-}
-
-static void ixp23xx_irq_mask(struct irq_data *d)
-{
-	volatile unsigned long *intr_reg;
-	unsigned int irq = d->irq;
-
-	if (irq >= 56)
-		irq += 8;
-
-	intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
-	*intr_reg &= ~(1 << (irq % 32));
-}
-
-static void ixp23xx_irq_ack(struct irq_data *d)
-{
-	int line = d->irq - IRQ_IXP23XX_GPIO6 + 6;
-
-	if ((line < 6) || (line > 15))
-		return;
-
-	*IXP23XX_GPIO_GPISR = (1 << line);
-}
-
-/*
- * Level triggered interrupts on GPIO lines can only be cleared when the
- * interrupt condition disappears.
- */
-static void ixp23xx_irq_level_unmask(struct irq_data *d)
-{
-	volatile unsigned long *intr_reg;
-	unsigned int irq = d->irq;
-
-	ixp23xx_irq_ack(d);
-
-	if (irq >= 56)
-		irq += 8;
-
-	intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
-	*intr_reg |= (1 << (irq % 32));
-}
-
-static void ixp23xx_irq_edge_unmask(struct irq_data *d)
-{
-	volatile unsigned long *intr_reg;
-	unsigned int irq = d->irq;
-
-	if (irq >= 56)
-		irq += 8;
-
-	intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
-	*intr_reg |= (1 << (irq % 32));
-}
-
-static struct irq_chip ixp23xx_irq_level_chip = {
-	.irq_ack	= ixp23xx_irq_mask,
-	.irq_mask	= ixp23xx_irq_mask,
-	.irq_unmask	= ixp23xx_irq_level_unmask,
-	.irq_set_type	= ixp23xx_irq_set_type
-};
-
-static struct irq_chip ixp23xx_irq_edge_chip = {
-	.irq_ack	= ixp23xx_irq_ack,
-	.irq_mask	= ixp23xx_irq_mask,
-	.irq_unmask	= ixp23xx_irq_edge_unmask,
-	.irq_set_type	= ixp23xx_irq_set_type
-};
-
-static void ixp23xx_pci_irq_mask(struct irq_data *d)
-{
-	unsigned int irq = d->irq;
-
-	*IXP23XX_PCI_XSCALE_INT_ENABLE &= ~(1 << (IRQ_IXP23XX_INTA + 27 - irq));
-}
-
-static void ixp23xx_pci_irq_unmask(struct irq_data *d)
-{
-	unsigned int irq = d->irq;
-
-	*IXP23XX_PCI_XSCALE_INT_ENABLE |= (1 << (IRQ_IXP23XX_INTA + 27 - irq));
-}
-
-/*
- * TODO: Should this just be done at ASM level?
- */
-static void pci_handler(unsigned int irq, struct irq_desc *desc)
-{
-	u32 pci_interrupt;
-	unsigned int irqno;
-
-	pci_interrupt = *IXP23XX_PCI_XSCALE_INT_STATUS;
-
-	desc->irq_data.chip->irq_ack(&desc->irq_data);
-
-	/* See which PCI_INTA, or PCI_INTB interrupted */
-	if (pci_interrupt & (1 << 26)) {
-		irqno = IRQ_IXP23XX_INTB;
-	} else if (pci_interrupt & (1 << 27)) {
-		irqno = IRQ_IXP23XX_INTA;
-	} else {
-		BUG();
-	}
-
-	generic_handle_irq(irqno);
-
-	desc->irq_data.chip->irq_unmask(&desc->irq_data);
-}
-
-static struct irq_chip ixp23xx_pci_irq_chip = {
-	.irq_ack	= ixp23xx_pci_irq_mask,
-	.irq_mask	= ixp23xx_pci_irq_mask,
-	.irq_unmask	= ixp23xx_pci_irq_unmask
-};
-
-static void ixp23xx_config_irq(unsigned int irq, enum ixp23xx_irq_type type)
-{
-	switch (type) {
-	case IXP23XX_IRQ_LEVEL:
-		irq_set_chip_and_handler(irq, &ixp23xx_irq_level_chip,
-					 handle_level_irq);
-		break;
-	case IXP23XX_IRQ_EDGE:
-		irq_set_chip_and_handler(irq, &ixp23xx_irq_edge_chip,
-					 handle_edge_irq);
-		break;
-	}
-	set_irq_flags(irq, IRQF_VALID);
-}
-
-void __init ixp23xx_init_irq(void)
-{
-	int irq;
-
-	/* Route everything to IRQ */
-	*IXP23XX_INTR_SEL1 = 0x0;
-	*IXP23XX_INTR_SEL2 = 0x0;
-	*IXP23XX_INTR_SEL3 = 0x0;
-	*IXP23XX_INTR_SEL4 = 0x0;
-
-	/* Mask all sources */
-	*IXP23XX_INTR_EN1 = 0x0;
-	*IXP23XX_INTR_EN2 = 0x0;
-	*IXP23XX_INTR_EN3 = 0x0;
-	*IXP23XX_INTR_EN4 = 0x0;
-
-	/*
-	 * Configure all IRQs for level-sensitive operation
-	 */
-	for (irq = 0; irq <= NUM_IXP23XX_RAW_IRQS; irq++) {
-		ixp23xx_config_irq(irq, IXP23XX_IRQ_LEVEL);
-	}
-
-	for (irq = IRQ_IXP23XX_INTA; irq <= IRQ_IXP23XX_INTB; irq++) {
-		irq_set_chip_and_handler(irq, &ixp23xx_pci_irq_chip,
-					 handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID);
-	}
-
-	irq_set_chained_handler(IRQ_IXP23XX_PCI_INT_RPH, pci_handler);
-}
-
-
-/*************************************************************************
- * Timer-tick functions for IXP23xx
- *************************************************************************/
-#define CLOCK_TICKS_PER_USEC	(CLOCK_TICK_RATE / USEC_PER_SEC)
-
-static unsigned long next_jiffy_time;
-
-static unsigned long
-ixp23xx_gettimeoffset(void)
-{
-	unsigned long elapsed;
-
-	elapsed = *IXP23XX_TIMER_CONT - (next_jiffy_time - LATCH);
-
-	return elapsed / CLOCK_TICKS_PER_USEC;
-}
-
-static irqreturn_t
-ixp23xx_timer_interrupt(int irq, void *dev_id)
-{
-	/* Clear Pending Interrupt by writing '1' to it */
-	*IXP23XX_TIMER_STATUS = IXP23XX_TIMER1_INT_PEND;
-	while ((signed long)(*IXP23XX_TIMER_CONT - next_jiffy_time) >= LATCH) {
-		timer_tick();
-		next_jiffy_time += LATCH;
-	}
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction ixp23xx_timer_irq = {
-	.name		= "IXP23xx Timer Tick",
-	.handler	= ixp23xx_timer_interrupt,
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-};
-
-void __init ixp23xx_init_timer(void)
-{
-	/* Clear Pending Interrupt by writing '1' to it */
-	*IXP23XX_TIMER_STATUS = IXP23XX_TIMER1_INT_PEND;
-
-	/* Setup the Timer counter value */
-	*IXP23XX_TIMER1_RELOAD =
-		(LATCH & ~IXP23XX_TIMER_RELOAD_MASK) | IXP23XX_TIMER_ENABLE;
-
-	*IXP23XX_TIMER_CONT = 0;
-	next_jiffy_time = LATCH;
-
-	/* Connect the interrupt handler and enable the interrupt */
-	setup_irq(IRQ_IXP23XX_TIMER1, &ixp23xx_timer_irq);
-}
-
-struct sys_timer ixp23xx_timer = {
-	.init		= ixp23xx_init_timer,
-	.offset		= ixp23xx_gettimeoffset,
-};
-
-
-/*************************************************************************
- * IXP23xx Platform Initialization
- *************************************************************************/
-static struct resource ixp23xx_uart_resources[] = {
-	{
-		.start		= IXP23XX_UART1_PHYS,
-		.end		= IXP23XX_UART1_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM
-	}, {
-		.start		= IXP23XX_UART2_PHYS,
-		.end		= IXP23XX_UART2_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM
-	}
-};
-
-static struct plat_serial8250_port ixp23xx_uart_data[] = {
-	{
-		.mapbase	= IXP23XX_UART1_PHYS,
-		.membase	= (char *)(IXP23XX_UART1_VIRT + 3),
-		.irq		= IRQ_IXP23XX_UART1,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP23XX_UART_XTAL,
-	}, {
-		.mapbase	= IXP23XX_UART2_PHYS,
-		.membase	= (char *)(IXP23XX_UART2_VIRT + 3),
-		.irq		= IRQ_IXP23XX_UART2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP23XX_UART_XTAL,
-	},
-	{ },
-};
-
-static struct platform_device ixp23xx_uart = {
-	.name			= "serial8250",
-	.id			= 0,
-	.dev.platform_data	= ixp23xx_uart_data,
-	.num_resources		= 2,
-	.resource		= ixp23xx_uart_resources,
-};
-
-static struct platform_device *ixp23xx_devices[] __initdata = {
-	&ixp23xx_uart,
-};
-
-void __init ixp23xx_sys_init(void)
-{
-	/* by default, the idle code is disabled */
-	disable_hlt();
-
-	*IXP23XX_EXP_UNIT_FUSE |= 0xf;
-	platform_add_devices(ixp23xx_devices, ARRAY_SIZE(ixp23xx_devices));
-}
-
-void ixp23xx_restart(char mode, const char *cmd)
-{
-	/* Use on-chip reset capability */
-	*IXP23XX_RESET0 |= IXP23XX_RST_ALL;
-}
diff --git a/arch/arm/mach-ixp23xx/espresso.c b/arch/arm/mach-ixp23xx/espresso.c
deleted file mode 100644
index d142d45dea12..000000000000
--- a/arch/arm/mach-ixp23xx/espresso.c
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * arch/arm/mach-ixp23xx/espresso.c
- *
- * Double Espresso-specific routines
- *
- * Author: Lennert Buytenhek <buytenh@wantstofly.org>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/bitops.h>
-#include <linux/ioport.h>
-#include <linux/serial_8250.h>
-#include <linux/serial_core.h>
-#include <linux/device.h>
-#include <linux/mm.h>
-#include <linux/pci.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-#include <asm/tlbflush.h>
-#include <asm/pgtable.h>
-
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-
-static int __init espresso_pci_init(void)
-{
-	if (machine_is_espresso())
-		ixp23xx_pci_slave_init();
-
-	return 0;
-};
-subsys_initcall(espresso_pci_init);
-
-static struct physmap_flash_data espresso_flash_data = {
-	.width		= 2,
-};
-
-static struct resource espresso_flash_resource = {
-	.start		= 0x90000000,
-	.end		= 0x91ffffff,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device espresso_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &espresso_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &espresso_flash_resource,
-};
-
-static void __init espresso_init(void)
-{
-	platform_device_register(&espresso_flash);
-
-	/*
-	 * Mark flash as writeable.
-	 */
-	IXP23XX_EXP_CS0[0] |= IXP23XX_FLASH_WRITABLE;
-	IXP23XX_EXP_CS0[1] |= IXP23XX_FLASH_WRITABLE;
-
-	ixp23xx_sys_init();
-}
-
-MACHINE_START(ESPRESSO, "IP Fabrics Double Espresso")
-	/* Maintainer: Lennert Buytenhek */
-	.map_io		= ixp23xx_map_io,
-	.init_irq	= ixp23xx_init_irq,
-	.timer		= &ixp23xx_timer,
-	.atag_offset	= 0x100,
-	.init_machine	= espresso_init,
-	.restart	= ixp23xx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-ixp23xx/include/mach/debug-macro.S b/arch/arm/mach-ixp23xx/include/mach/debug-macro.S
deleted file mode 100644
index 5ff524c13744..000000000000
--- a/arch/arm/mach-ixp23xx/include/mach/debug-macro.S
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * arch/arm/mach-ixp23xx/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <mach/ixp23xx.h>
-
-		.macro	addruart, rp, rv, tmp
-		ldr	\rp, =IXP23XX_PERIPHERAL_PHYS 	@ physical
-		ldr	\rv, =IXP23XX_PERIPHERAL_VIRT	@ virtual
-#ifdef __ARMEB__
-		orr	\rp, \rp, #0x00000003
-		orr	\rv, \rv, #0x00000003
-#endif
-		.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-ixp23xx/include/mach/entry-macro.S b/arch/arm/mach-ixp23xx/include/mach/entry-macro.S
deleted file mode 100644
index 3fd2cb984e42..000000000000
--- a/arch/arm/mach-ixp23xx/include/mach/entry-macro.S
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * arch/arm/mach-ixp23xx/include/mach/entry-macro.S
- */
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\irqnr, =(IXP23XX_INTC_VIRT + IXP23XX_INTR_IRQ_ENC_ST_OFFSET)
-		ldr	\irqnr, [\irqnr]	@ get interrupt number
-		cmp	\irqnr, #0x0		@ spurious interrupt ?
-		movne	\irqnr, \irqnr, lsr #2	@ skip unwanted low order bits
-		subne	\irqnr, \irqnr, #1	@ convert to 0 based
-
-#if 0
-		cmp	\irqnr, #IRQ_IXP23XX_PCI_INT_RPH
-		bne	1001f
-		mov	\irqnr, #IRQ_IXP23XX_INTA
-
-		ldr	\irqnr, =0xf5000030
-
-		mov	\tmp, #(1<<26)
-		tst	\irqnr, \tmp
-		movne	\irqnr, #IRQ_IXP23XX_INTB
-
-		mov	\tmp, #(1<<27)
-		tst	\irqnr, \tmp
-		movne	\irqnr, #IRQ_IXP23XX_INTA
-1001:
-#endif
-		.endm
diff --git a/arch/arm/mach-ixp23xx/include/mach/hardware.h b/arch/arm/mach-ixp23xx/include/mach/hardware.h
deleted file mode 100644
index 60e55fa10238..000000000000
--- a/arch/arm/mach-ixp23xx/include/mach/hardware.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * arch/arm/mach-ixp23xx/include/mach/hardware.h
- *
- * Copyright (C) 2002-2004 Intel Corporation.
- * Copyricht (C) 2005 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Hardware definitions for IXP23XX based systems
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-/* PCI IO info */
-
-#include "ixp23xx.h"
-
-/*
- * Platform helper functions
- */
-#include "platform.h"
-
-/*
- * Platform-specific headers
- */
-#include "ixdp2351.h"
-
-
-#endif
diff --git a/arch/arm/mach-ixp23xx/include/mach/io.h b/arch/arm/mach-ixp23xx/include/mach/io.h
deleted file mode 100644
index a7aceb55c130..000000000000
--- a/arch/arm/mach-ixp23xx/include/mach/io.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * arch/arm/mach-ixp23xx/include/mach/io.h
- *
- * Original Author: Naeem M Afzal <naeem.m.afzal@intel.com>
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2003-2005 Intel Corp.
- * Copyright (C) 2005 MontaVista Software, Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-#define __io(p)		((void __iomem*)((p) + IXP23XX_PCI_IO_VIRT))
-
-#endif
diff --git a/arch/arm/mach-ixp23xx/include/mach/irqs.h b/arch/arm/mach-ixp23xx/include/mach/irqs.h
deleted file mode 100644
index 3af33a04b8a2..000000000000
--- a/arch/arm/mach-ixp23xx/include/mach/irqs.h
+++ /dev/null
@@ -1,223 +0,0 @@
-/*
- * arch/arm/mach-ixp23xx/include/mach/irqs.h
- *
- * IRQ definitions for IXP23XX based systems
- *
- * Author: Naeem Afzal <naeem.m.afzal@intel.com>
- *
- * Copyright (C) 2003-2004 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#define NR_IXP23XX_IRQS			IRQ_IXP23XX_INTB+1
-#define IRQ_IXP23XX_EXTIRQS		NR_IXP23XX_IRQS
-
-
-#define IRQ_IXP23XX_DBG0		0	/* Debug/Execution/MBox */
-#define IRQ_IXP23XX_DBG1		1	/* Debug/Execution/MBox */
-#define IRQ_IXP23XX_NPE_TRG		2	/* npe_trigger */
-#define IRQ_IXP23XX_TIMER1		3	/* Timer[0] */
-#define IRQ_IXP23XX_TIMER2		4	/* Timer[1] */
-#define IRQ_IXP23XX_TIMESTAMP		5	/* Timer[2], Time-stamp */
-#define IRQ_IXP23XX_WDOG		6	/* Time[3], Watchdog Timer */
-#define IRQ_IXP23XX_PCI_DBELL		7	/* PCI Doorbell */
-#define IRQ_IXP23XX_PCI_DMA1		8	/* PCI DMA Channel 1 */
-#define IRQ_IXP23XX_PCI_DMA2		9	/* PCI DMA Channel 2 */
-#define IRQ_IXP23XX_PCI_DMA3		10	/* PCI DMA Channel 3 */
-#define IRQ_IXP23XX_PCI_INT_RPH		11	/* pcxg_pci_int_rph */
-#define IRQ_IXP23XX_CPP_PMU		12	/* xpxg_pm_int_rpl */
-#define IRQ_IXP23XX_SWINT0		13	/* S/W Interrupt0 */
-#define IRQ_IXP23XX_SWINT1		14	/* S/W Interrupt1 */
-#define IRQ_IXP23XX_UART2		15	/* UART1 Interrupt */
-#define IRQ_IXP23XX_UART1		16	/* UART0 Interrupt */
-#define IRQ_IXP23XX_XSI_PMU_ROLLOVER	17	/* AHB Performance M. Unit counter rollover */
-#define IRQ_IXP23XX_XSI_AHB_PM0		18	/* intr_pm_o */
-#define IRQ_IXP23XX_XSI_AHB_ECE0	19	/* intr_ece_o */
-#define IRQ_IXP23XX_XSI_AHB_GASKET	20	/* gas_intr_o */
-#define IRQ_IXP23XX_XSI_CPP		21	/* xsi2cpp_int */
-#define IRQ_IXP23XX_CPP_XSI		22	/* cpp2xsi_int */
-#define IRQ_IXP23XX_ME_ATTN0		23	/* ME_ATTN */
-#define IRQ_IXP23XX_ME_ATTN1		24	/* ME_ATTN */
-#define IRQ_IXP23XX_ME_ATTN2		25	/* ME_ATTN */
-#define IRQ_IXP23XX_ME_ATTN3		26	/* ME_ATTN */
-#define IRQ_IXP23XX_PCI_ERR_RPH		27	/* PCXG_PCI_ERR_RPH */
-#define IRQ_IXP23XX_D0XG_ECC_CORR	28	/* D0XG_DRAM_ECC_CORR */
-#define IRQ_IXP23XX_D0XG_ECC_UNCORR	29	/* D0XG_DRAM_ECC_UNCORR */
-#define IRQ_IXP23XX_SRAM_ERR1		30	/* SRAM1_ERR */
-#define IRQ_IXP23XX_SRAM_ERR0		31	/* SRAM0_ERR */
-#define IRQ_IXP23XX_MEDIA_ERR		32	/* MEDIA_ERR */
-#define IRQ_IXP23XX_STH_DRAM_ECC_MAJ	33	/* STH_DRAM0_ECC_MAJ */
-#define IRQ_IXP23XX_GPIO6		34	/* GPIO0 interrupts */
-#define IRQ_IXP23XX_GPIO7		35	/* GPIO1 interrupts */
-#define IRQ_IXP23XX_GPIO8		36	/* GPIO2 interrupts */
-#define IRQ_IXP23XX_GPIO9		37	/* GPIO3 interrupts */
-#define IRQ_IXP23XX_GPIO10		38	/* GPIO4 interrupts */
-#define IRQ_IXP23XX_GPIO11		39	/* GPIO5 interrupts */
-#define IRQ_IXP23XX_GPIO12		40	/* GPIO6 interrupts */
-#define IRQ_IXP23XX_GPIO13		41	/* GPIO7 interrupts */
-#define IRQ_IXP23XX_GPIO14		42	/* GPIO8 interrupts */
-#define IRQ_IXP23XX_GPIO15		43	/* GPIO9 interrupts */
-#define IRQ_IXP23XX_SHAC_RING0		44	/* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING1		45	/* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING2		46	/* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING3		47	/* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING4		48	/* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING5		49	/* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING6		50	/* SHAC RING Full */
-#define IRQ_IXP23XX_SHAC_RING7		51	/* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING8		52	/* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING9		53	/* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING10		54	/* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING11		55	/* SHAC Ring Full */
-#define IRQ_IXP23XX_ME_THREAD_A0_ME0	56	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A1_ME0	57	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A2_ME0	58	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A3_ME0	59	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A4_ME0	60	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A5_ME0	61	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A6_ME0	62	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A7_ME0	63	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A8_ME1	64	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A9_ME1	65	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A10_ME1	66	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A11_ME1	67	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A12_ME1	68	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A13_ME1	69	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A14_ME1	70	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A15_ME1	71	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A16_ME2	72	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A17_ME2	73	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A18_ME2	74	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A19_ME2	75	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A20_ME2	76	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A21_ME2	77	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A22_ME2	78	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A23_ME2	79	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A24_ME3	80	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A25_ME3	81	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A26_ME3	82	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A27_ME3	83	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A28_ME3	84	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A29_ME3	85	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A30_ME3	86	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A31_ME3	87	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_B0_ME0	88	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B1_ME0	89	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B2_ME0	90	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B3_ME0	91	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B4_ME0	92	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B5_ME0	93	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B6_ME0	94	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B7_ME0	95	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B8_ME1	96	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B9_ME1	97	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B10_ME1	98	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B11_ME1	99	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B12_ME1	100	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B13_ME1	101	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B14_ME1	102	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B15_ME1	103	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B16_ME2	104	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B17_ME2	105	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B18_ME2	106	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B19_ME2	107	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B20_ME2	108	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B21_ME2	109	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B22_ME2	110	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B23_ME2	111	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B24_ME3	112	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B25_ME3	113	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B26_ME3	114	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B27_ME3	115	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B28_ME3	116	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B29_ME3	117	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B30_ME3	118	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B31_ME3	119	/* ME_THREAD_B */
-
-#define NUM_IXP23XX_RAW_IRQS		120
-
-#define IRQ_IXP23XX_INTA		120	/* Indirect pcxg_pci_int_rph */
-#define IRQ_IXP23XX_INTB		121	/* Indirect pcxg_pci_int_rph */
-
-#define NR_IXP23XX_IRQ			(IRQ_IXP23XX_INTB + 1)
-
-/*
- * We default to 32 per-board IRQs. Increase this number if you need
- * more, but keep it realistic.
- */
-#define NR_IXP23XX_MACH_IRQS 		32
-
-#define NR_IRQS				(NR_IXP23XX_IRQS + NR_IXP23XX_MACH_IRQS)
-
-#define IXP23XX_MACH_IRQ(irq) 		(NR_IXP23XX_IRQ + (irq))
-
-
-/*
- * IXDP2351-specific interrupts
- */
-
-/*
- * External PCI interrupts signaled through INTB
- *
- */
-#define IXDP2351_INTB_IRQ_BASE 		0
-#define IRQ_IXDP2351_INTA_82546		IXP23XX_MACH_IRQ(0)
-#define IRQ_IXDP2351_INTB_82546		IXP23XX_MACH_IRQ(1)
-#define IRQ_IXDP2351_SPCI_DB_0		IXP23XX_MACH_IRQ(2)
-#define IRQ_IXDP2351_SPCI_DB_1		IXP23XX_MACH_IRQ(3)
-#define IRQ_IXDP2351_SPCI_PMC_INTA	IXP23XX_MACH_IRQ(4)
-#define IRQ_IXDP2351_SPCI_PMC_INTB	IXP23XX_MACH_IRQ(5)
-#define IRQ_IXDP2351_SPCI_PMC_INTC	IXP23XX_MACH_IRQ(6)
-#define IRQ_IXDP2351_SPCI_PMC_INTD	IXP23XX_MACH_IRQ(7)
-#define IRQ_IXDP2351_SPCI_FIC		IXP23XX_MACH_IRQ(8)
-
-#define IXDP2351_INTB_IRQ_BIT(irq)	(irq - IXP23XX_MACH_IRQ(0))
-#define IXDP2351_INTB_IRQ_MASK(irq)	(1 << IXDP2351_INTB_IRQ_BIT(irq))
-#define IXDP2351_INTB_IRQ_VALID		0x01FF
-#define IXDP2351_INTB_IRQ_NUM 		16
-
-/*
- * Other external interrupts signaled through INTA
- */
-#define IXDP2351_INTA_IRQ_BASE 		16
-#define IRQ_IXDP2351_IPMI_FROM		IXP23XX_MACH_IRQ(16)
-#define IRQ_IXDP2351_125US		IXP23XX_MACH_IRQ(17)
-#define IRQ_IXDP2351_DB_0_ADD		IXP23XX_MACH_IRQ(18)
-#define IRQ_IXDP2351_DB_1_ADD		IXP23XX_MACH_IRQ(19)
-#define IRQ_IXDP2351_DEBUG1		IXP23XX_MACH_IRQ(20)
-#define IRQ_IXDP2351_ADD_UART		IXP23XX_MACH_IRQ(21)
-#define IRQ_IXDP2351_FIC_ADD		IXP23XX_MACH_IRQ(24)
-#define IRQ_IXDP2351_CS8900		IXP23XX_MACH_IRQ(25)
-#define IRQ_IXDP2351_BBSRAM		IXP23XX_MACH_IRQ(26)
-#define IRQ_IXDP2351_CONFIG_MEDIA	IXP23XX_MACH_IRQ(27)
-#define IRQ_IXDP2351_CLOCK_REF		IXP23XX_MACH_IRQ(28)
-#define IRQ_IXDP2351_A10_NP		IXP23XX_MACH_IRQ(29)
-#define IRQ_IXDP2351_A11_NP		IXP23XX_MACH_IRQ(30)
-#define IRQ_IXDP2351_DEBUG_NP		IXP23XX_MACH_IRQ(31)
-
-#define IXDP2351_INTA_IRQ_BIT(irq) 	(irq - IXP23XX_MACH_IRQ(16))
-#define IXDP2351_INTA_IRQ_MASK(irq) 	(1 << IXDP2351_INTA_IRQ_BIT(irq))
-#define IXDP2351_INTA_IRQ_VALID 	0xFF3F
-#define IXDP2351_INTA_IRQ_NUM 		16
-
-
-/*
- * ADI RoadRunner IRQs
- */
-#define IRQ_ROADRUNNER_PCI_INTA 	IRQ_IXP23XX_INTA
-#define IRQ_ROADRUNNER_PCI_INTB 	IRQ_IXP23XX_INTB
-#define IRQ_ROADRUNNER_PCI_INTC 	IRQ_IXP23XX_GPIO11
-#define IRQ_ROADRUNNER_PCI_INTD 	IRQ_IXP23XX_GPIO12
-
-/*
- * Put new board definitions here
- */
-
-
-#endif
diff --git a/arch/arm/mach-ixp23xx/include/mach/ixdp2351.h b/arch/arm/mach-ixp23xx/include/mach/ixdp2351.h
deleted file mode 100644
index 663951027de5..000000000000
--- a/arch/arm/mach-ixp23xx/include/mach/ixdp2351.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * arch/arm/mach-ixp23xx/include/mach/ixdp2351.h
- *
- * Register and other defines for IXDP2351
- *
- * Copyright (c) 2002-2004 Intel Corp.
- * Copytight (c) 2005 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __ASM_ARCH_IXDP2351_H
-#define __ASM_ARCH_IXDP2351_H
-
-/*
- * NP module memory map
- */
-#define IXDP2351_NP_PHYS_BASE		(IXP23XX_EXP_BUS_CS4_BASE)
-#define IXDP2351_NP_PHYS_SIZE		0x00100000
-#define IXDP2351_NP_VIRT_BASE		0xeff00000
-
-#define IXDP2351_VIRT_CS8900_BASE	(IXDP2351_NP_VIRT_BASE)
-#define IXDP2351_VIRT_CS8900_END	(IXDP2351_VIRT_CS8900_BASE + 16)
-
-#define IXDP2351_VIRT_NP_CPLD_BASE 	(IXP23XX_EXP_BUS_CS4_BASE_VIRT + 0x00010000)
-
-#define IXDP2351_NP_CPLD_REG(reg) ((volatile u16 *)(IXDP2351_VIRT_NP_CPLD_BASE + reg))
-
-#define IXDP2351_NP_CPLD_RESET1_REG	IXDP2351_NP_CPLD_REG(0x00)
-#define IXDP2351_NP_CPLD_LED_REG	IXDP2351_NP_CPLD_REG(0x02)
-#define IXDP2351_NP_CPLD_VERSION_REG	IXDP2351_NP_CPLD_REG(0x04)
-
-/*
- * Base board module memory map
- */
-
-#define IXDP2351_BB_BASE_PHYS		(IXP23XX_EXP_BUS_CS5_BASE)
-#define IXDP2351_BB_SIZE		0x01000000
-#define IXDP2351_BB_BASE_VIRT		(0xee000000)
-
-#define IXDP2351_BB_AREA_BASE(offset)	(IXDP2351_BB_BASE_VIRT + offset)
-
-#define IXDP2351_VIRT_NVRAM_BASE	IXDP2351_BB_AREA_BASE(0x0)
-#define IXDP2351_NVRAM_SIZE		(0x20000)
-
-#define IXDP2351_VIRT_MB_IXF1104_BASE	IXDP2351_BB_AREA_BASE(0x00020000)
-#define IXDP2351_VIRT_ADD_UART_BASE	IXDP2351_BB_AREA_BASE(0x000240C0)
-#define IXDP2351_VIRT_FIC_BASE		IXDP2351_BB_AREA_BASE(0x00200000)
-#define IXDP2351_VIRT_DB0_BASE		IXDP2351_BB_AREA_BASE(0x00400000)
-#define IXDP2351_VIRT_DB1_BASE		IXDP2351_BB_AREA_BASE(0x00600000)
-#define IXDP2351_VIRT_CPLD_BASE		IXDP2351_BB_AREA_BASE(0x00024000)
-
-/*
- * On board CPLD registers
- */
-#define IXDP2351_CPLD_BB_REG(reg) ((volatile u16 *)(IXDP2351_VIRT_CPLD_BASE + reg))
-
-#define IXDP2351_CPLD_RESET0_REG	IXDP2351_CPLD_BB_REG(0x00)
-#define IXDP2351_CPLD_RESET1_REG	IXDP2351_CPLD_BB_REG(0x04)
-
-#define IXDP2351_CPLD_RESET1_MAGIC 	0x55AA
-#define IXDP2351_CPLD_RESET1_ENABLE 	0x8000
-
-#define IXDP2351_CPLD_FPGA_CONFIG_REG	IXDP2351_CPLD_BB_REG(0x08)
-#define IXDP2351_CPLD_INTB_MASK_SET_REG	IXDP2351_CPLD_BB_REG(0x10)
-#define IXDP2351_CPLD_INTA_MASK_SET_REG	IXDP2351_CPLD_BB_REG(0x14)
-#define IXDP2351_CPLD_INTB_STAT_REG	IXDP2351_CPLD_BB_REG(0x18)
-#define IXDP2351_CPLD_INTA_STAT_REG	IXDP2351_CPLD_BB_REG(0x1C)
-#define IXDP2351_CPLD_INTB_RAW_REG	IXDP2351_CPLD_BB_REG(0x20)	/* read */
-#define IXDP2351_CPLD_INTA_RAW_REG	IXDP2351_CPLD_BB_REG(0x24)	/* read */
-#define IXDP2351_CPLD_INTB_MASK_CLR_REG	IXDP2351_CPLD_INTB_RAW_REG	/* write */
-#define IXDP2351_CPLD_INTA_MASK_CLR_REG	IXDP2351_CPLD_INTA_RAW_REG	/* write */
-#define IXDP2351_CPLD_INTB_SIM_REG	IXDP2351_CPLD_BB_REG(0x28)
-#define IXDP2351_CPLD_INTA_SIM_REG	IXDP2351_CPLD_BB_REG(0x2C)
-	/* Interrupt bits are defined in irqs.h */
-#define IXDP2351_CPLD_BB_GBE0_REG	IXDP2351_CPLD_BB_REG(0x30)
-#define IXDP2351_CPLD_BB_GBE1_REG	IXDP2351_CPLD_BB_REG(0x34)
-
-/* #define IXDP2351_CPLD_BB_MISC_REG	IXDP2351_CPLD_REG(0x1C) */
-/* #define IXDP2351_CPLD_BB_MISC_REV_MASK	0xFF		*/
-/* #define IXDP2351_CPLD_BB_GDXCS0_REG	IXDP2351_CPLD_REG(0x24) */
-/* #define IXDP2351_CPLD_BB_GDXCS1_REG	IXDP2351_CPLD_REG(0x28) */
-/* #define IXDP2351_CPLD_BB_CLOCK_REG	IXDP2351_CPLD_REG(0x04) */
-
-
-#endif
diff --git a/arch/arm/mach-ixp23xx/include/mach/ixp23xx.h b/arch/arm/mach-ixp23xx/include/mach/ixp23xx.h
deleted file mode 100644
index 6d02481b1d6d..000000000000
--- a/arch/arm/mach-ixp23xx/include/mach/ixp23xx.h
+++ /dev/null
@@ -1,298 +0,0 @@
-/*
- * arch/arm/mach-ixp23xx/include/mach/ixp23xx.h
- *
- * Register definitions for IXP23XX
- *
- * Copyright (C) 2003-2005 Intel Corporation.
- * Copyright (C) 2005 MontaVista Software, Inc.
- *
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_IXP23XX_H
-#define __ASM_ARCH_IXP23XX_H
-
-/*
- * IXP2300 linux memory map:
- *
- * virt		phys		size
- * fffd0000	a0000000	64K		XSI2CPP_CSR
- * fffc0000	c4000000	4K		EXP_CFG
- * fff00000	c8000000	64K		PERIPHERAL
- * fe000000	1c0000000	16M		CAP_CSR
- * fd000000	1c8000000	16M		MSF_CSR
- * fb000000			16M		---
- * fa000000	1d8000000	32M		PCI_IO
- * f8000000	1da000000	32M		PCI_CFG
- * f6000000	1de000000	32M		PCI_CREG
- * f4000000			32M		---
- * f0000000	1e0000000	64M		PCI_MEM
- * e[c-f]000000					per-platform mappings
- */
-
-
-/****************************************************************************
- * Static mappings.
- ****************************************************************************/
-#define IXP23XX_XSI2CPP_CSR_PHYS	0xa0000000
-#define IXP23XX_XSI2CPP_CSR_VIRT	0xfffd0000
-#define IXP23XX_XSI2CPP_CSR_SIZE	0x00010000
-
-#define IXP23XX_EXP_CFG_PHYS		0xc4000000
-#define IXP23XX_EXP_CFG_VIRT		0xfffc0000
-#define IXP23XX_EXP_CFG_SIZE		0x00001000
-
-#define IXP23XX_PERIPHERAL_PHYS		0xc8000000
-#define IXP23XX_PERIPHERAL_VIRT		0xfff00000
-#define IXP23XX_PERIPHERAL_SIZE		0x00010000
-
-#define IXP23XX_CAP_CSR_PHYS		0x1c0000000ULL
-#define IXP23XX_CAP_CSR_VIRT		0xfe000000
-#define IXP23XX_CAP_CSR_SIZE		0x01000000
-
-#define IXP23XX_MSF_CSR_PHYS		0x1c8000000ULL
-#define IXP23XX_MSF_CSR_VIRT		0xfd000000
-#define IXP23XX_MSF_CSR_SIZE		0x01000000
-
-#define IXP23XX_PCI_IO_PHYS		0x1d8000000ULL
-#define IXP23XX_PCI_IO_VIRT		0xfa000000
-#define IXP23XX_PCI_IO_SIZE		0x02000000
-
-#define IXP23XX_PCI_CFG_PHYS		0x1da000000ULL
-#define IXP23XX_PCI_CFG_VIRT		0xf8000000
-#define IXP23XX_PCI_CFG_SIZE		0x02000000
-#define IXP23XX_PCI_CFG0_VIRT		IXP23XX_PCI_CFG_VIRT
-#define IXP23XX_PCI_CFG1_VIRT		(IXP23XX_PCI_CFG_VIRT + 0x01000000)
-
-#define IXP23XX_PCI_CREG_PHYS		0x1de000000ULL
-#define IXP23XX_PCI_CREG_VIRT		0xf6000000
-#define IXP23XX_PCI_CREG_SIZE		0x02000000
-#define IXP23XX_PCI_CSR_VIRT		(IXP23XX_PCI_CREG_VIRT + 0x01000000)
-
-#define IXP23XX_PCI_MEM_START		0xe0000000
-#define IXP23XX_PCI_MEM_PHYS		0x1e0000000ULL
-#define IXP23XX_PCI_MEM_VIRT		0xf0000000
-#define IXP23XX_PCI_MEM_SIZE		0x04000000
-
-
-/****************************************************************************
- * XSI2CPP CSRs.
- ****************************************************************************/
-#define IXP23XX_XSI2CPP_REG(x)		((volatile unsigned long *)(IXP23XX_XSI2CPP_CSR_VIRT + (x)))
-#define IXP23XX_CPP2XSI_CURR_XFER_REG3	IXP23XX_XSI2CPP_REG(0xf8)
-#define IXP23XX_CPP2XSI_ADDR_31		(1 << 19)
-#define IXP23XX_CPP2XSI_PSH_OFF		(1 << 20)
-#define IXP23XX_CPP2XSI_COH_OFF		(1 << 21)
-
-
-/****************************************************************************
- * Expansion Bus Config.
- ****************************************************************************/
-#define IXP23XX_EXP_CFG_REG(x)		((volatile unsigned long *)(IXP23XX_EXP_CFG_VIRT + (x)))
-#define IXP23XX_EXP_CS0			IXP23XX_EXP_CFG_REG(0x00)
-#define IXP23XX_EXP_CS1			IXP23XX_EXP_CFG_REG(0x04)
-#define IXP23XX_EXP_CS2			IXP23XX_EXP_CFG_REG(0x08)
-#define IXP23XX_EXP_CS3			IXP23XX_EXP_CFG_REG(0x0c)
-#define IXP23XX_EXP_CS4			IXP23XX_EXP_CFG_REG(0x10)
-#define IXP23XX_EXP_CS5			IXP23XX_EXP_CFG_REG(0x14)
-#define IXP23XX_EXP_CS6			IXP23XX_EXP_CFG_REG(0x18)
-#define IXP23XX_EXP_CS7			IXP23XX_EXP_CFG_REG(0x1c)
-#define IXP23XX_FLASH_WRITABLE		(0x2)
-#define IXP23XX_FLASH_BUS8		(0x1)
-
-#define IXP23XX_EXP_CFG0		IXP23XX_EXP_CFG_REG(0x20)
-#define IXP23XX_EXP_CFG1		IXP23XX_EXP_CFG_REG(0x24)
-#define IXP23XX_EXP_CFG0_MEM_MAP		(1 << 31)
-#define IXP23XX_EXP_CFG0_XSCALE_SPEED_SEL 	(3 << 22)
-#define IXP23XX_EXP_CFG0_XSCALE_SPEED_EN	(1 << 21)
-#define IXP23XX_EXP_CFG0_CPP_SPEED_SEL		(3 << 19)
-#define IXP23XX_EXP_CFG0_CPP_SPEED_EN		(1 << 18)
-#define IXP23XX_EXP_CFG0_PCI_SWIN		(3 << 16)
-#define IXP23XX_EXP_CFG0_PCI_DWIN		(3 << 14)
-#define IXP23XX_EXP_CFG0_PCI33_MODE		(1 << 13)
-#define IXP23XX_EXP_CFG0_QDR_SPEED_SEL		(1 << 12)
-#define IXP23XX_EXP_CFG0_CPP_DIV_SEL		(1 << 5)
-#define IXP23XX_EXP_CFG0_XSI_NOT_PRES		(1 << 4)
-#define IXP23XX_EXP_CFG0_PROM_BOOT		(1 << 3)
-#define IXP23XX_EXP_CFG0_PCI_ARB		(1 << 2)
-#define IXP23XX_EXP_CFG0_PCI_HOST		(1 << 1)
-#define IXP23XX_EXP_CFG0_FLASH_WIDTH		(1 << 0)
-
-#define IXP23XX_EXP_UNIT_FUSE		IXP23XX_EXP_CFG_REG(0x28)
-#define IXP23XX_EXP_MSF_MUX		IXP23XX_EXP_CFG_REG(0x30)
-#define IXP23XX_EXP_CFG_FUSE		IXP23XX_EXP_CFG_REG(0x34)
-
-#define IXP23XX_EXP_BUS_PHYS		0x90000000
-#define IXP23XX_EXP_BUS_WINDOW_SIZE	0x01000000
-
-#define IXP23XX_EXP_BUS_CS0_BASE	(IXP23XX_EXP_BUS_PHYS + 0x00000000)
-#define IXP23XX_EXP_BUS_CS1_BASE	(IXP23XX_EXP_BUS_PHYS + 0x01000000)
-#define IXP23XX_EXP_BUS_CS2_BASE	(IXP23XX_EXP_BUS_PHYS + 0x02000000)
-#define IXP23XX_EXP_BUS_CS3_BASE	(IXP23XX_EXP_BUS_PHYS + 0x03000000)
-#define IXP23XX_EXP_BUS_CS4_BASE	(IXP23XX_EXP_BUS_PHYS + 0x04000000)
-#define IXP23XX_EXP_BUS_CS5_BASE	(IXP23XX_EXP_BUS_PHYS + 0x05000000)
-#define IXP23XX_EXP_BUS_CS6_BASE	(IXP23XX_EXP_BUS_PHYS + 0x06000000)
-#define IXP23XX_EXP_BUS_CS7_BASE	(IXP23XX_EXP_BUS_PHYS + 0x07000000)
-
-
-/****************************************************************************
- * Peripherals.
- ****************************************************************************/
-#define IXP23XX_UART1_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x0000)
-#define IXP23XX_UART2_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x1000)
-#define IXP23XX_PMU_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x2000)
-#define IXP23XX_INTC_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x3000)
-#define IXP23XX_GPIO_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x4000)
-#define IXP23XX_TIMER_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x5000)
-#define IXP23XX_NPE0_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x6000)
-#define IXP23XX_DSR_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x7000)
-#define IXP23XX_NPE1_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x8000)
-#define IXP23XX_ETH0_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x9000)
-#define IXP23XX_ETH1_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0xA000)
-#define IXP23XX_GIG0_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0xB000)
-#define IXP23XX_GIG1_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0xC000)
-#define IXP23XX_DDRS_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0xD000)
-
-#define IXP23XX_UART1_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x0000)
-#define IXP23XX_UART2_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x1000)
-#define IXP23XX_PMU_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x2000)
-#define IXP23XX_INTC_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x3000)
-#define IXP23XX_GPIO_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x4000)
-#define IXP23XX_TIMER_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x5000)
-#define IXP23XX_NPE0_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x6000)
-#define IXP23XX_DSR_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x7000)
-#define IXP23XX_NPE1_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x8000)
-#define IXP23XX_ETH0_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x9000)
-#define IXP23XX_ETH1_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0xA000)
-#define IXP23XX_GIG0_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0xB000)
-#define IXP23XX_GIG1_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0xC000)
-#define IXP23XX_DDRS_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0xD000)
-
-
-/****************************************************************************
- * Interrupt controller.
- ****************************************************************************/
-#define IXP23XX_INTC_REG(x)		 ((volatile unsigned long *)(IXP23XX_INTC_VIRT + (x)))
-#define IXP23XX_INTR_ST1		IXP23XX_INTC_REG(0x00)
-#define IXP23XX_INTR_ST2		IXP23XX_INTC_REG(0x04)
-#define IXP23XX_INTR_ST3		IXP23XX_INTC_REG(0x08)
-#define IXP23XX_INTR_ST4		IXP23XX_INTC_REG(0x0c)
-#define IXP23XX_INTR_EN1		IXP23XX_INTC_REG(0x10)
-#define IXP23XX_INTR_EN2		IXP23XX_INTC_REG(0x14)
-#define IXP23XX_INTR_EN3		IXP23XX_INTC_REG(0x18)
-#define IXP23XX_INTR_EN4		IXP23XX_INTC_REG(0x1c)
-#define IXP23XX_INTR_SEL1		IXP23XX_INTC_REG(0x20)
-#define IXP23XX_INTR_SEL2		IXP23XX_INTC_REG(0x24)
-#define IXP23XX_INTR_SEL3		IXP23XX_INTC_REG(0x28)
-#define IXP23XX_INTR_SEL4		IXP23XX_INTC_REG(0x2c)
-#define IXP23XX_INTR_IRQ_ST1		IXP23XX_INTC_REG(0x30)
-#define IXP23XX_INTR_IRQ_ST2		IXP23XX_INTC_REG(0x34)
-#define IXP23XX_INTR_IRQ_ST3		IXP23XX_INTC_REG(0x38)
-#define IXP23XX_INTR_IRQ_ST4		IXP23XX_INTC_REG(0x3c)
-#define IXP23XX_INTR_IRQ_ENC_ST_OFFSET	0x54
-
-
-/****************************************************************************
- * GPIO.
- ****************************************************************************/
-#define IXP23XX_GPIO_REG(x)		((volatile unsigned long *)(IXP23XX_GPIO_VIRT + (x)))
-#define IXP23XX_GPIO_GPOUTR		IXP23XX_GPIO_REG(0x00)
-#define IXP23XX_GPIO_GPOER		IXP23XX_GPIO_REG(0x04)
-#define IXP23XX_GPIO_GPINR		IXP23XX_GPIO_REG(0x08)
-#define IXP23XX_GPIO_GPISR		IXP23XX_GPIO_REG(0x0c)
-#define IXP23XX_GPIO_GPIT1R		IXP23XX_GPIO_REG(0x10)
-#define IXP23XX_GPIO_GPIT2R		IXP23XX_GPIO_REG(0x14)
-#define IXP23XX_GPIO_GPCLKR		IXP23XX_GPIO_REG(0x18)
-#define IXP23XX_GPIO_GPDBSELR 		IXP23XX_GPIO_REG(0x1c)
-
-#define IXP23XX_GPIO_STYLE_MASK		0x7
-#define IXP23XX_GPIO_STYLE_ACTIVE_HIGH	0x0
-#define IXP23XX_GPIO_STYLE_ACTIVE_LOW	0x1
-#define IXP23XX_GPIO_STYLE_RISING_EDGE	0x2
-#define IXP23XX_GPIO_STYLE_FALLING_EDGE	0x3
-#define IXP23XX_GPIO_STYLE_TRANSITIONAL	0x4
-
-#define IXP23XX_GPIO_STYLE_SIZE		3
-
-
-/****************************************************************************
- * Timer.
- ****************************************************************************/
-#define IXP23XX_TIMER_REG(x)		((volatile unsigned long *)(IXP23XX_TIMER_VIRT + (x)))
-#define IXP23XX_TIMER_CONT		IXP23XX_TIMER_REG(0x00)
-#define IXP23XX_TIMER1_TIMESTAMP	IXP23XX_TIMER_REG(0x04)
-#define IXP23XX_TIMER1_RELOAD		IXP23XX_TIMER_REG(0x08)
-#define IXP23XX_TIMER2_TIMESTAMP	IXP23XX_TIMER_REG(0x0c)
-#define IXP23XX_TIMER2_RELOAD		IXP23XX_TIMER_REG(0x10)
-#define IXP23XX_TIMER_WDOG		IXP23XX_TIMER_REG(0x14)
-#define IXP23XX_TIMER_WDOG_EN		IXP23XX_TIMER_REG(0x18)
-#define IXP23XX_TIMER_WDOG_KEY		IXP23XX_TIMER_REG(0x1c)
-#define IXP23XX_TIMER_WDOG_KEY_MAGIC	0x482e
-#define IXP23XX_TIMER_STATUS		IXP23XX_TIMER_REG(0x20)
-#define IXP23XX_TIMER_SOFT_RESET	IXP23XX_TIMER_REG(0x24)
-#define IXP23XX_TIMER_SOFT_RESET_EN	IXP23XX_TIMER_REG(0x28)
-
-#define IXP23XX_TIMER_ENABLE		(1 << 0)
-#define IXP23XX_TIMER_ONE_SHOT		(1 << 1)
-/* Low order bits of reload value ignored */
-#define IXP23XX_TIMER_RELOAD_MASK	(0x3)
-#define IXP23XX_TIMER_DISABLED		(0x0)
-#define IXP23XX_TIMER1_INT_PEND		(1 << 0)
-#define IXP23XX_TIMER2_INT_PEND		(1 << 1)
-#define IXP23XX_TIMER_STATUS_TS_PEND	(1 << 2)
-#define IXP23XX_TIMER_STATUS_WDOG_PEND	(1 << 3)
-#define IXP23XX_TIMER_STATUS_WARM_RESET	(1 << 4)
-
-
-/****************************************************************************
- * CAP CSRs.
- ****************************************************************************/
-#define IXP23XX_GLOBAL_REG(x)		((volatile unsigned long *)(IXP23XX_CAP_CSR_VIRT + 0x4a00 + (x)))
-#define IXP23XX_PRODUCT_ID		IXP23XX_GLOBAL_REG(0x00)
-#define IXP23XX_MISC_CONTROL		IXP23XX_GLOBAL_REG(0x04)
-#define IXP23XX_MSF_CLK_CNTRL		IXP23XX_GLOBAL_REG(0x08)
-#define IXP23XX_RESET0			IXP23XX_GLOBAL_REG(0x0c)
-#define IXP23XX_RESET1			IXP23XX_GLOBAL_REG(0x10)
-#define IXP23XX_STRAP_OPTIONS		IXP23XX_GLOBAL_REG(0x18)
-
-#define IXP23XX_ENABLE_WATCHDOG		(1 << 24)
-#define IXP23XX_SHPC_INIT_COMP		(1 << 21)
-#define IXP23XX_RST_ALL			(1 << 16)
-#define IXP23XX_RESET_PCI		(1 << 2)
-#define IXP23XX_PCI_UNIT_RESET		(1 << 1)
-#define IXP23XX_XSCALE_RESET		(1 << 0)
-
-#define IXP23XX_UENGINE_CSR_VIRT_BASE	(IXP23XX_CAP_CSR_VIRT + 0x18000)
-
-
-/****************************************************************************
- * PCI CSRs.
- ****************************************************************************/
-#define IXP23XX_PCI_CREG(x)		((volatile unsigned long *)(IXP23XX_PCI_CREG_VIRT + (x)))
-#define IXP23XX_PCI_CMDSTAT		IXP23XX_PCI_CREG(0x04)
-#define IXP23XX_PCI_SRAM_BAR		IXP23XX_PCI_CREG(0x14)
-#define IXP23XX_PCI_SDRAM_BAR		IXP23XX_PCI_CREG(0x18)
-
-
-#define IXP23XX_PCI_CSR(x)		((volatile unsigned long *)(IXP23XX_PCI_CREG_VIRT + 0x01000000 + (x)))
-#define IXP23XX_PCI_OUT_INT_STATUS	IXP23XX_PCI_CSR(0x0030)
-#define IXP23XX_PCI_OUT_INT_MASK	IXP23XX_PCI_CSR(0x0034)
-#define IXP23XX_PCI_SRAM_BASE_ADDR_MASK IXP23XX_PCI_CSR(0x00fc)
-#define IXP23XX_PCI_DRAM_BASE_ADDR_MASK IXP23XX_PCI_CSR(0x0100)
-#define IXP23XX_PCI_CONTROL		IXP23XX_PCI_CSR(0x013c)
-#define IXP23XX_PCI_ADDR_EXT		IXP23XX_PCI_CSR(0x0140)
-#define IXP23XX_PCI_ME_PUSH_STATUS	IXP23XX_PCI_CSR(0x0148)
-#define IXP23XX_PCI_ME_PUSH_EN		IXP23XX_PCI_CSR(0x014c)
-#define IXP23XX_PCI_ERR_STATUS		IXP23XX_PCI_CSR(0x0150)
-#define IXP23XX_PCI_ERROR_STATUS	IXP23XX_PCI_CSR(0x0150)
-#define IXP23XX_PCI_ERR_ENABLE		IXP23XX_PCI_CSR(0x0154)
-#define IXP23XX_PCI_XSCALE_INT_STATUS	IXP23XX_PCI_CSR(0x0158)
-#define IXP23XX_PCI_XSCALE_INT_ENABLE	IXP23XX_PCI_CSR(0x015c)
-#define IXP23XX_PCI_CPP_ADDR_BITS	IXP23XX_PCI_CSR(0x0160)
-
-
-#endif
diff --git a/arch/arm/mach-ixp23xx/include/mach/memory.h b/arch/arm/mach-ixp23xx/include/mach/memory.h
deleted file mode 100644
index 6cf0704e946a..000000000000
--- a/arch/arm/mach-ixp23xx/include/mach/memory.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * arch/arm/mach-ixp23xx/include/mach/memory.h
- *
- * Copyright (c) 2003-2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#include <mach/hardware.h>
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET		(0x00000000)
-
-#define IXP23XX_PCI_SDRAM_OFFSET (*((volatile int *)IXP23XX_PCI_SDRAM_BAR) & 0xfffffff0)
-
-#define __phys_to_bus(x)	((x) + (IXP23XX_PCI_SDRAM_OFFSET - PHYS_OFFSET))
-#define __bus_to_phys(x)	((x) - (IXP23XX_PCI_SDRAM_OFFSET - PHYS_OFFSET))
-
-#define __virt_to_bus(v)	__phys_to_bus(__virt_to_phys(v))
-#define __bus_to_virt(b)	__phys_to_virt(__bus_to_phys(b))
-#define __pfn_to_bus(p)		__phys_to_bus(__pfn_to_phys(p))
-#define __bus_to_pfn(b)		__phys_to_pfn(__bus_to_phys(b))
-
-#define arch_is_coherent()	1
-
-#endif
diff --git a/arch/arm/mach-ixp23xx/include/mach/platform.h b/arch/arm/mach-ixp23xx/include/mach/platform.h
deleted file mode 100644
index 50de558e722e..000000000000
--- a/arch/arm/mach-ixp23xx/include/mach/platform.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * arch/arm/mach-ixp23xx/include/mach/platform.h
- *
- * Various bits of code used by platform-level code.
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2005 (c) MontaVista Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASSEMBLY__
-
-static inline unsigned long ixp2000_reg_read(volatile void *reg)
-{
-	return *((volatile unsigned long *)reg);
-}
-
-static inline void ixp2000_reg_write(volatile void *reg, unsigned long val)
-{
-	*((volatile unsigned long *)reg) = val;
-}
-
-static inline void ixp2000_reg_wrb(volatile void *reg, unsigned long val)
-{
-	*((volatile unsigned long *)reg) = val;
-}
-
-struct pci_sys_data;
-
-void ixp23xx_map_io(void);
-void ixp23xx_init_irq(void);
-void ixp23xx_sys_init(void);
-void ixp23xx_restart(char, const char *);
-int ixp23xx_pci_setup(int, struct pci_sys_data *);
-void ixp23xx_pci_preinit(void);
-struct pci_bus *ixp23xx_pci_scan_bus(int, struct pci_sys_data*);
-void ixp23xx_pci_slave_init(void);
-
-extern struct sys_timer ixp23xx_timer;
-
-#define IXP23XX_UART_XTAL		14745600
-
-#ifndef __ASSEMBLY__
-/*
- * Is system memory on the XSI or CPP bus?
- */
-static inline unsigned ixp23xx_cpp_boot(void)
-{
-	return (*IXP23XX_EXP_CFG0 & IXP23XX_EXP_CFG0_XSI_NOT_PRES);
-}
-#endif
-
-
-#endif
diff --git a/arch/arm/mach-ixp23xx/include/mach/time.h b/arch/arm/mach-ixp23xx/include/mach/time.h
deleted file mode 100644
index b61dafc884ac..000000000000
--- a/arch/arm/mach-ixp23xx/include/mach/time.h
+++ /dev/null
@@ -1,3 +0,0 @@
-/*
- * arch/arm/mach-ixp23xx/include/mach/time.h
- */
diff --git a/arch/arm/mach-ixp23xx/include/mach/timex.h b/arch/arm/mach-ixp23xx/include/mach/timex.h
deleted file mode 100644
index e341e9cf9c37..000000000000
--- a/arch/arm/mach-ixp23xx/include/mach/timex.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/*
- * arch/arm/mach-ixp23xx/include/mach/timex.h
- *
- * XScale architecture timex specifications
- */
-
-#define CLOCK_TICK_RATE 75000000
diff --git a/arch/arm/mach-ixp23xx/include/mach/uncompress.h b/arch/arm/mach-ixp23xx/include/mach/uncompress.h
deleted file mode 100644
index 8b4c358d2c04..000000000000
--- a/arch/arm/mach-ixp23xx/include/mach/uncompress.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * arch/arm/mach-ixp23xx/include/mach/uncompress.h
- *
- * Copyright (C) 2002-2004 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <mach/ixp23xx.h>
-#include <linux/serial_reg.h>
-
-#define UART_BASE	((volatile u32 *)IXP23XX_UART1_PHYS)
-
-static inline void putc(char c)
-{
-	int j;
-
-	for (j = 0; j < 0x1000; j++) {
-		if (UART_BASE[UART_LSR] & UART_LSR_THRE)
-			break;
-		barrier();
-	}
-
-	UART_BASE[UART_TX] = c;
-}
-
-static inline void flush(void)
-{
-}
-
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
-
-
-#endif
diff --git a/arch/arm/mach-ixp23xx/ixdp2351.c b/arch/arm/mach-ixp23xx/ixdp2351.c
deleted file mode 100644
index b0e07db5ceaf..000000000000
--- a/arch/arm/mach-ixp23xx/ixdp2351.c
+++ /dev/null
@@ -1,347 +0,0 @@
-/*
- * arch/arm/mach-ixp23xx/ixdp2351.c
- *
- * IXDP2351 board-specific routines
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2005 (c) MontaVista Software, Inc.
- *
- * Based on 2.4 code Copyright 2004 (c) Intel Corporation
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/bitops.h>
-#include <linux/ioport.h>
-#include <linux/serial_8250.h>
-#include <linux/serial_core.h>
-#include <linux/device.h>
-#include <linux/mm.h>
-#include <linux/pci.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/tlbflush.h>
-#include <asm/pgtable.h>
-
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-
-/*
- * IXDP2351 Interrupt Handling
- */
-static void ixdp2351_inta_mask(struct irq_data *d)
-{
-	*IXDP2351_CPLD_INTA_MASK_SET_REG = IXDP2351_INTA_IRQ_MASK(d->irq);
-}
-
-static void ixdp2351_inta_unmask(struct irq_data *d)
-{
-	*IXDP2351_CPLD_INTA_MASK_CLR_REG = IXDP2351_INTA_IRQ_MASK(d->irq);
-}
-
-static void ixdp2351_inta_handler(unsigned int irq, struct irq_desc *desc)
-{
-	u16 ex_interrupt =
-		*IXDP2351_CPLD_INTA_STAT_REG & IXDP2351_INTA_IRQ_VALID;
-	int i;
-
-	desc->irq_data.chip->irq_mask(&desc->irq_data);
-
-	for (i = 0; i < IXDP2351_INTA_IRQ_NUM; i++) {
-		if (ex_interrupt & (1 << i)) {
-			int cpld_irq =
-				IXP23XX_MACH_IRQ(IXDP2351_INTA_IRQ_BASE + i);
-			generic_handle_irq(cpld_irq);
-		}
-	}
-
-	desc->irq_data.chip->irq_unmask(&desc->irq_data);
-}
-
-static struct irq_chip ixdp2351_inta_chip = {
-	.irq_ack	= ixdp2351_inta_mask,
-	.irq_mask	= ixdp2351_inta_mask,
-	.irq_unmask	= ixdp2351_inta_unmask
-};
-
-static void ixdp2351_intb_mask(struct irq_data *d)
-{
-	*IXDP2351_CPLD_INTB_MASK_SET_REG = IXDP2351_INTB_IRQ_MASK(d->irq);
-}
-
-static void ixdp2351_intb_unmask(struct irq_data *d)
-{
-	*IXDP2351_CPLD_INTB_MASK_CLR_REG = IXDP2351_INTB_IRQ_MASK(d->irq);
-}
-
-static void ixdp2351_intb_handler(unsigned int irq, struct irq_desc *desc)
-{
-	u16 ex_interrupt =
-		*IXDP2351_CPLD_INTB_STAT_REG & IXDP2351_INTB_IRQ_VALID;
-	int i;
-
-	desc->irq_data.chip->irq_ack(&desc->irq_data);
-
-	for (i = 0; i < IXDP2351_INTB_IRQ_NUM; i++) {
-		if (ex_interrupt & (1 << i)) {
-			int cpld_irq =
-				IXP23XX_MACH_IRQ(IXDP2351_INTB_IRQ_BASE + i);
-			generic_handle_irq(cpld_irq);
-		}
-	}
-
-	desc->irq_data.chip->irq_unmask(&desc->irq_data);
-}
-
-static struct irq_chip ixdp2351_intb_chip = {
-	.irq_ack	= ixdp2351_intb_mask,
-	.irq_mask	= ixdp2351_intb_mask,
-	.irq_unmask	= ixdp2351_intb_unmask
-};
-
-void __init ixdp2351_init_irq(void)
-{
-	int irq;
-
-	/* Mask all interrupts from CPLD, disable simulation */
-	*IXDP2351_CPLD_INTA_MASK_SET_REG = (u16) -1;
-	*IXDP2351_CPLD_INTB_MASK_SET_REG = (u16) -1;
-	*IXDP2351_CPLD_INTA_SIM_REG = 0;
-	*IXDP2351_CPLD_INTB_SIM_REG = 0;
-
-	ixp23xx_init_irq();
-
-	for (irq = IXP23XX_MACH_IRQ(IXDP2351_INTA_IRQ_BASE);
-	     irq <
-	     IXP23XX_MACH_IRQ(IXDP2351_INTA_IRQ_BASE + IXDP2351_INTA_IRQ_NUM);
-	     irq++) {
-		if (IXDP2351_INTA_IRQ_MASK(irq) & IXDP2351_INTA_IRQ_VALID) {
-			set_irq_flags(irq, IRQF_VALID);
-			irq_set_chip_and_handler(irq, &ixdp2351_inta_chip,
-						 handle_level_irq);
-		}
-	}
-
-	for (irq = IXP23XX_MACH_IRQ(IXDP2351_INTB_IRQ_BASE);
-	     irq <
-	     IXP23XX_MACH_IRQ(IXDP2351_INTB_IRQ_BASE + IXDP2351_INTB_IRQ_NUM);
-	     irq++) {
-		if (IXDP2351_INTB_IRQ_MASK(irq) & IXDP2351_INTB_IRQ_VALID) {
-			set_irq_flags(irq, IRQF_VALID);
-			irq_set_chip_and_handler(irq, &ixdp2351_intb_chip,
-						 handle_level_irq);
-		}
-	}
-
-	irq_set_chained_handler(IRQ_IXP23XX_INTA, ixdp2351_inta_handler);
-	irq_set_chained_handler(IRQ_IXP23XX_INTB, ixdp2351_intb_handler);
-}
-
-/*
- * IXDP2351 PCI
- */
-
-/*
- * This board does not do normal PCI IRQ routing, or any
- * sort of swizzling, so we just need to check where on the
- * bus the device is and figure out what CPLD pin it is
- * being routed to.
- */
-#define DEVPIN(dev, pin) ((pin) | ((dev) << 3))
-
-static int __init ixdp2351_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	u8 bus = dev->bus->number;
-	u32 devpin = DEVPIN(PCI_SLOT(dev->devfn), pin);
-	struct pci_bus *tmp_bus = dev->bus;
-
-	/* Primary bus, no interrupts here */
-	if (!bus)
-		return -1;
-
-	/* Lookup first leaf in bus tree */
-	while ((tmp_bus->parent != NULL) && (tmp_bus->parent->parent != NULL))
-		tmp_bus = tmp_bus->parent;
-
-	/* Select between known bridges */
-	switch (tmp_bus->self->devfn | (tmp_bus->self->bus->number << 8)) {
-		/* Device is located after first bridge */
-	case 0x0008:
-		if (tmp_bus == dev->bus) {
-			/* Device is located directy after first bridge */
-			switch (devpin) {
-				/* Onboard 82546 */
-			case DEVPIN(1, 1):	/* Onboard 82546 ch 0 */
-				return IRQ_IXDP2351_INTA_82546;
-			case DEVPIN(1, 2):	/* Onboard 82546 ch 1 */
-				return IRQ_IXDP2351_INTB_82546;
-				/* PMC SLOT */
-			case DEVPIN(0, 1):	/* PMCP INTA# */
-			case DEVPIN(2, 4):	/* PMCS INTD# */
-				return IRQ_IXDP2351_SPCI_PMC_INTA;
-			case DEVPIN(0, 2):	/* PMCP INTB# */
-			case DEVPIN(2, 1):	/* PMCS INTA# */
-				return IRQ_IXDP2351_SPCI_PMC_INTB;
-			case DEVPIN(0, 3):	/* PMCP INTC# */
-			case DEVPIN(2, 2):	/* PMCS INTB# */
-				return IRQ_IXDP2351_SPCI_PMC_INTC;
-			case DEVPIN(0, 4):	/* PMCP INTD# */
-			case DEVPIN(2, 3):	/* PMCS INTC# */
-				return IRQ_IXDP2351_SPCI_PMC_INTD;
-			}
-		} else {
-			/* Device is located indirectly after first bridge */
-			/* Not supported now */
-			return -1;
-		}
-		break;
-	case 0x0010:
-		if (tmp_bus == dev->bus) {
-			/* Device is located directy after second bridge */
-			/* Secondary bus of second bridge */
-			switch (devpin) {
-			case DEVPIN(0, 1):	/* DB#0 */
-			case DEVPIN(0, 2):
-			case DEVPIN(0, 3):
-			case DEVPIN(0, 4):
-				return IRQ_IXDP2351_SPCI_DB_0;
-			case DEVPIN(1, 1):	/* DB#1 */
-			case DEVPIN(1, 2):
-			case DEVPIN(1, 3):
-			case DEVPIN(1, 4):
-				return IRQ_IXDP2351_SPCI_DB_1;
-			case DEVPIN(2, 1):	/* FIC1 */
-			case DEVPIN(2, 2):
-			case DEVPIN(2, 3):
-			case DEVPIN(2, 4):
-			case DEVPIN(3, 1):	/* FIC2 */
-			case DEVPIN(3, 2):
-			case DEVPIN(3, 3):
-			case DEVPIN(3, 4):
-				return IRQ_IXDP2351_SPCI_FIC;
-			}
-		} else {
-			/* Device is located indirectly after second bridge */
-			/* Not supported now */
-			return -1;
-		}
-		break;
-	}
-
-	return -1;
-}
-
-struct hw_pci ixdp2351_pci __initdata = {
-	.nr_controllers	= 1,
-	.preinit	= ixp23xx_pci_preinit,
-	.setup		= ixp23xx_pci_setup,
-	.scan		= ixp23xx_pci_scan_bus,
-	.map_irq	= ixdp2351_map_irq,
-};
-
-int __init ixdp2351_pci_init(void)
-{
-	if (machine_is_ixdp2351())
-		pci_common_init(&ixdp2351_pci);
-
-	return 0;
-}
-
-subsys_initcall(ixdp2351_pci_init);
-
-/*
- * IXDP2351 Static Mapped I/O
- */
-static struct map_desc ixdp2351_io_desc[] __initdata = {
-	{
-		.virtual	= IXDP2351_NP_VIRT_BASE,
-		.pfn		= __phys_to_pfn((u64)IXDP2351_NP_PHYS_BASE),
-		.length		= IXDP2351_NP_PHYS_SIZE,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= IXDP2351_BB_BASE_VIRT,
-		.pfn		= __phys_to_pfn((u64)IXDP2351_BB_BASE_PHYS),
-		.length		= IXDP2351_BB_SIZE,
-		.type		= MT_DEVICE
-	}
-};
-
-static void __init ixdp2351_map_io(void)
-{
-	ixp23xx_map_io();
-	iotable_init(ixdp2351_io_desc, ARRAY_SIZE(ixdp2351_io_desc));
-}
-
-static struct physmap_flash_data ixdp2351_flash_data = {
-	.width		= 1,
-};
-
-static struct resource ixdp2351_flash_resource = {
-	.start		= 0x90000000,
-	.end		= 0x93ffffff,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device ixdp2351_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &ixdp2351_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &ixdp2351_flash_resource,
-};
-
-static void __init ixdp2351_init(void)
-{
-	platform_device_register(&ixdp2351_flash);
-
-	/*
-	 * Mark flash as writeable
-	 */
-	IXP23XX_EXP_CS0[0] |= IXP23XX_FLASH_WRITABLE;
-	IXP23XX_EXP_CS0[1] |= IXP23XX_FLASH_WRITABLE;
-	IXP23XX_EXP_CS0[2] |= IXP23XX_FLASH_WRITABLE;
-	IXP23XX_EXP_CS0[3] |= IXP23XX_FLASH_WRITABLE;
-
-	ixp23xx_sys_init();
-}
-
-static void ixdp2351_restart(char mode, const char *cmd)
-{
-	/* First try machine specific support */
-
-	*IXDP2351_CPLD_RESET1_REG = IXDP2351_CPLD_RESET1_MAGIC;
-	(void) *IXDP2351_CPLD_RESET1_REG;
-	*IXDP2351_CPLD_RESET1_REG = IXDP2351_CPLD_RESET1_ENABLE;
-
-	ixp23xx_restart(mode, cmd);
-}
-
-MACHINE_START(IXDP2351, "Intel IXDP2351 Development Platform")
-	/* Maintainer: MontaVista Software, Inc. */
-	.map_io		= ixdp2351_map_io,
-	.init_irq	= ixdp2351_init_irq,
-	.timer		= &ixp23xx_timer,
-	.atag_offset	= 0x100,
-	.init_machine	= ixdp2351_init,
-	.restart	= ixdp2351_restart,
-MACHINE_END
diff --git a/arch/arm/mach-ixp23xx/pci.c b/arch/arm/mach-ixp23xx/pci.c
deleted file mode 100644
index 911f5a58e006..000000000000
--- a/arch/arm/mach-ixp23xx/pci.c
+++ /dev/null
@@ -1,294 +0,0 @@
-/*
- * arch/arm/mach-ixp23xx/pci.c
- *
- * PCI routines for IXP23XX based systems
- *
- * Copyright (c) 2005 MontaVista Software, Inc.
- *
- * based on original code:
- *
- * Author: Naeem Afzal <naeem.m.afzal@intel.com>
- * Copyright 2002-2005 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/sizes.h>
-#include <asm/mach/pci.h>
-#include <mach/hardware.h>
-
-extern int (*external_fault) (unsigned long, struct pt_regs *);
-
-static volatile int pci_master_aborts = 0;
-
-#ifdef DEBUG
-#define DBG(x...)	printk(x)
-#else
-#define DBG(x...)
-#endif
-
-int clear_master_aborts(void);
-
-static u32
-*ixp23xx_pci_config_addr(unsigned int bus_nr, unsigned int devfn, int where)
-{
-	u32 *paddress;
-
-	/*
-	 * Must be dword aligned
-	 */
-	where &= ~3;
-
-	/*
-	 * For top bus, generate type 0, else type 1
-	 */
-	if (!bus_nr) {
-		if (PCI_SLOT(devfn) >= 8)
-			return 0;
-
-		paddress = (u32 *) (IXP23XX_PCI_CFG0_VIRT
-				    | (1 << (PCI_SLOT(devfn) + 16))
-				    | (PCI_FUNC(devfn) << 8) | where);
-	} else {
-		paddress = (u32 *) (IXP23XX_PCI_CFG1_VIRT
-				    | (bus_nr << 16)
-				    | (PCI_SLOT(devfn) << 11)
-				    | (PCI_FUNC(devfn) << 8) | where);
-	}
-
-	return paddress;
-}
-
-/*
- * Mask table, bits to mask for quantity of size 1, 2 or 4 bytes.
- * 0 and 3 are not valid indexes...
- */
-static u32 bytemask[] = {
-	/*0*/	0,
-	/*1*/	0xff,
-	/*2*/	0xffff,
-	/*3*/	0,
-	/*4*/	0xffffffff,
-};
-
-static int ixp23xx_pci_read_config(struct pci_bus *bus, unsigned int devfn,
-				int where, int size, u32 *value)
-{
-	u32 n;
-	u32 *addr;
-
-	n = where % 4;
-
-	DBG("In config_read(%d) %d from dev %d:%d:%d\n", size, where,
-		bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));
-
-	addr = ixp23xx_pci_config_addr(bus->number, devfn, where);
-	if (!addr)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	pci_master_aborts = 0;
-	*value = (*addr >> (8*n)) & bytemask[size];
-	if (pci_master_aborts) {
-			pci_master_aborts = 0;
-			*value = 0xffffffff;
-			return PCIBIOS_DEVICE_NOT_FOUND;
-		}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-/*
- * We don't do error checking on the address for writes.
- * It's assumed that the user checked for the device existing first
- * by doing a read first.
- */
-static int ixp23xx_pci_write_config(struct pci_bus *bus, unsigned int devfn,
-					int where, int size, u32 value)
-{
-	u32 mask;
-	u32 *addr;
-	u32 temp;
-
-	mask = ~(bytemask[size] << ((where % 0x4) * 8));
-	addr = ixp23xx_pci_config_addr(bus->number, devfn, where);
-	if (!addr)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	temp = (u32) (value) << ((where % 0x4) * 8);
-	*addr = (*addr & mask) | temp;
-
-	clear_master_aborts();
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops ixp23xx_pci_ops = {
-	.read	= ixp23xx_pci_read_config,
-	.write	= ixp23xx_pci_write_config,
-};
-
-struct pci_bus *ixp23xx_pci_scan_bus(int nr, struct pci_sys_data *sysdata)
-{
-	return pci_scan_root_bus(NULL, sysdata->busnr, &ixp23xx_pci_ops,
-				 sysdata, &sysdata->resources);
-}
-
-int ixp23xx_pci_abort_handler(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
-{
-	volatile unsigned long temp;
-	unsigned long flags;
-
-	pci_master_aborts = 1;
-
-	local_irq_save(flags);
-	temp = *IXP23XX_PCI_CONTROL;
-
-	/*
-	 * master abort and cmd tgt err
-	 */
-	if (temp & ((1 << 8) | (1 << 5)))
-		*IXP23XX_PCI_CONTROL = temp;
-
-	temp = *IXP23XX_PCI_CMDSTAT;
-
-	if (temp & (1 << 29))
-		*IXP23XX_PCI_CMDSTAT = temp;
-	local_irq_restore(flags);
-
-	/*
-	 * If it was an imprecise abort, then we need to correct the
-	 * return address to be _after_ the instruction.
-	 */
-	if (fsr & (1 << 10))
-		regs->ARM_pc += 4;
-
-	return 0;
-}
-
-int clear_master_aborts(void)
-{
-	volatile u32 temp;
-
-	temp = *IXP23XX_PCI_CONTROL;
-
-	/*
-	 * master abort and cmd tgt err
-	 */
-	if (temp & ((1 << 8) | (1 << 5)))
-		*IXP23XX_PCI_CONTROL = temp;
-
-	temp = *IXP23XX_PCI_CMDSTAT;
-
-	if (temp & (1 << 29))
-		*IXP23XX_PCI_CMDSTAT = temp;
-
-	return 0;
-}
-
-static void __init ixp23xx_pci_common_init(void)
-{
-#ifdef __ARMEB__
-	*IXP23XX_PCI_CONTROL |= 0x20000;	/* set I/O swapping */
-#endif
-	/*
-	 * ADDR_31 needs to be clear for PCI memory access to CPP memory
-	 */
-	*IXP23XX_CPP2XSI_CURR_XFER_REG3 &= ~IXP23XX_CPP2XSI_ADDR_31;
-	*IXP23XX_CPP2XSI_CURR_XFER_REG3 |= IXP23XX_CPP2XSI_PSH_OFF;
-
-	/*
-	 * Select correct memory for PCI inbound transactions
-	 */
-	if (ixp23xx_cpp_boot()) {
-		*IXP23XX_PCI_CPP_ADDR_BITS &= ~(1 << 1);
-	} else {
-		*IXP23XX_PCI_CPP_ADDR_BITS |= (1 << 1);
-
-		/*
-		 * Enable coherency on A2 silicon.
-		 */
-		if (arch_is_coherent())
-			*IXP23XX_CPP2XSI_CURR_XFER_REG3 &= ~IXP23XX_CPP2XSI_COH_OFF;
-	}
-}
-
-void __init ixp23xx_pci_preinit(void)
-{
-	pcibios_min_io = 0;
-	pcibios_min_mem = 0xe0000000;
-
-	pci_set_flags(0);
-
-	ixp23xx_pci_common_init();
-
-	hook_fault_code(16+6, ixp23xx_pci_abort_handler, SIGBUS, 0,
-			"PCI config cycle to non-existent device");
-
-	*IXP23XX_PCI_ADDR_EXT = 0x0000e000;
-}
-
-/*
- * Prevent PCI layer from seeing the inbound host-bridge resources
- */
-static void __devinit pci_fixup_ixp23xx(struct pci_dev *dev)
-{
-	int i;
-
-	dev->class &= 0xff;
-	dev->class |= PCI_CLASS_BRIDGE_HOST << 8;
-	for (i = 0; i < PCI_NUM_RESOURCES; i++) {
-		dev->resource[i].start = 0;
-		dev->resource[i].end   = 0;
-		dev->resource[i].flags = 0;
-	}
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x9002, pci_fixup_ixp23xx);
-
-/*
- * IXP2300 systems often have large resource requirements, so we just
- * use our own resource space.
- */
-static struct resource ixp23xx_pci_mem_space = {
-	.start	= IXP23XX_PCI_MEM_START,
-	.end	= IXP23XX_PCI_MEM_START + IXP23XX_PCI_MEM_SIZE - 1,
-	.flags	= IORESOURCE_MEM,
-	.name	= "PCI Mem Space"
-};
-
-static struct resource ixp23xx_pci_io_space = {
-	.start	= 0x00000100,
-	.end	= 0x01ffffff,
-	.flags	= IORESOURCE_IO,
-	.name	= "PCI I/O Space"
-};
-
-int ixp23xx_pci_setup(int nr, struct pci_sys_data *sys)
-{
-	if (nr >= 1)
-		return 0;
-
-	pci_add_resource_offset(&sys->resources,
-				&ixp23xx_pci_io_space, sys->io_offset);
-	pci_add_resource_offset(&sys->resources,
-				&ixp23xx_pci_mem_space, sys->mem_offset);
-
-	return 1;
-}
-
-void __init ixp23xx_pci_slave_init(void)
-{
-	ixp23xx_pci_common_init();
-}
diff --git a/arch/arm/mach-ixp23xx/roadrunner.c b/arch/arm/mach-ixp23xx/roadrunner.c
deleted file mode 100644
index eaaa3fa9fd05..000000000000
--- a/arch/arm/mach-ixp23xx/roadrunner.c
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * arch/arm/mach-ixp23xx/roadrunner.c
- *
- * RoadRunner board-specific routines
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2005 (c) MontaVista Software, Inc.
- *
- * Based on 2.4 code Copyright 2005 (c) ADI Engineering Corporation
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/bitops.h>
-#include <linux/ioport.h>
-#include <linux/serial_8250.h>
-#include <linux/serial_core.h>
-#include <linux/device.h>
-#include <linux/mm.h>
-#include <linux/pci.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-#include <asm/tlbflush.h>
-#include <asm/pgtable.h>
-
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-
-/*
- * Interrupt mapping
- */
-#define INTA		IRQ_ROADRUNNER_PCI_INTA
-#define INTB		IRQ_ROADRUNNER_PCI_INTB
-#define INTC		IRQ_ROADRUNNER_PCI_INTC
-#define INTD		IRQ_ROADRUNNER_PCI_INTD
-
-#define INTC_PIN	IXP23XX_GPIO_PIN_11
-#define INTD_PIN	IXP23XX_GPIO_PIN_12
-
-static int __init roadrunner_map_irq(const struct pci_dev *dev, u8 idsel,
-	u8 pin)
-{
-	static int pci_card_slot_irq[] = {INTB, INTC, INTD, INTA};
-	static int pmc_card_slot_irq[] = {INTA, INTB, INTC, INTD};
-	static int usb_irq[] = {INTB, INTC, INTD, -1};
-	static int mini_pci_1_irq[] = {INTB, INTC, -1, -1};
-	static int mini_pci_2_irq[] = {INTC, INTD, -1, -1};
-
-	switch(dev->bus->number) {
-		case 0:
-			switch(dev->devfn) {
-			case 0x0: // PCI-PCI bridge
-				break;
-			case 0x8: // PCI Card Slot
-				return pci_card_slot_irq[pin - 1];
-			case 0x10: // PMC Slot
-				return pmc_card_slot_irq[pin - 1];
-			case 0x18: // PMC Slot Secondary Agent
-				break;
-			case 0x20: // IXP Processor
-				break;
-			default:
-				return NO_IRQ;
-			}
-			break;
-
-		case 1:
-			switch(dev->devfn) {
-			case 0x0: // IDE Controller
-				return (pin == 1) ? INTC : -1;
-			case 0x8: // USB fun 0
-			case 0x9: // USB fun 1
-			case 0xa: // USB fun 2
-				return usb_irq[pin - 1];
-			case 0x10: // Mini PCI 1
-				return mini_pci_1_irq[pin-1];
-			case 0x18: // Mini PCI 2
-				return mini_pci_2_irq[pin-1];
-			case 0x20: // MEM slot
-				return (pin == 1) ? INTA : -1;
-			default:
-				return NO_IRQ;
-			}
-			break;
-
-		default:
-			return NO_IRQ;
-	}
-
-	return NO_IRQ;
-}
-
-static void __init roadrunner_pci_preinit(void)
-{
-	irq_set_irq_type(IRQ_ROADRUNNER_PCI_INTC, IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IRQ_ROADRUNNER_PCI_INTD, IRQ_TYPE_LEVEL_LOW);
-
-	ixp23xx_pci_preinit();
-}
-
-static struct hw_pci roadrunner_pci __initdata = {
-	.nr_controllers	= 1,
-	.preinit	= roadrunner_pci_preinit,
-	.setup		= ixp23xx_pci_setup,
-	.scan		= ixp23xx_pci_scan_bus,
-	.map_irq	= roadrunner_map_irq,
-};
-
-static int __init roadrunner_pci_init(void)
-{
-	if (machine_is_roadrunner())
-		pci_common_init(&roadrunner_pci);
-
-	return 0;
-};
-
-subsys_initcall(roadrunner_pci_init);
-
-static struct physmap_flash_data roadrunner_flash_data = {
-	.width		= 2,
-};
-
-static struct resource roadrunner_flash_resource = {
-	.start		= 0x90000000,
-	.end		= 0x93ffffff,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device roadrunner_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &roadrunner_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &roadrunner_flash_resource,
-};
-
-static void __init roadrunner_init(void)
-{
-	platform_device_register(&roadrunner_flash);
-
-	/*
-	 * Mark flash as writeable
-	 */
-	IXP23XX_EXP_CS0[0] |= IXP23XX_FLASH_WRITABLE;
-	IXP23XX_EXP_CS0[1] |= IXP23XX_FLASH_WRITABLE;
-	IXP23XX_EXP_CS0[2] |= IXP23XX_FLASH_WRITABLE;
-	IXP23XX_EXP_CS0[3] |= IXP23XX_FLASH_WRITABLE;
-
-	ixp23xx_sys_init();
-}
-
-MACHINE_START(ROADRUNNER, "ADI Engineering RoadRunner Development Platform")
-	/* Maintainer: Deepak Saxena */
-	.map_io		= ixp23xx_map_io,
-	.init_irq	= ixp23xx_init_irq,
-	.timer		= &ixp23xx_timer,
-	.atag_offset	= 0x100,
-	.init_machine	= roadrunner_init,
-	.restart	= ixp23xx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/avila-pci.c b/arch/arm/mach-ixp4xx/avila-pci.c
index 8fea0a3c5246..548c7d43ade6 100644
--- a/arch/arm/mach-ixp4xx/avila-pci.c
+++ b/arch/arm/mach-ixp4xx/avila-pci.c
@@ -65,10 +65,9 @@ static int __init avila_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 
 struct hw_pci avila_pci __initdata = {
 	.nr_controllers = 1,
+	.ops		= &ixp4xx_ops,
 	.preinit	= avila_pci_preinit,
-	.swizzle	= pci_std_swizzle,
 	.setup		= ixp4xx_setup,
-	.scan		= ixp4xx_scan_bus,
 	.map_irq	= avila_map_irq,
 };
 
diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c
index d5719eb42591..1694f01ce2b6 100644
--- a/arch/arm/mach-ixp4xx/common-pci.c
+++ b/arch/arm/mach-ixp4xx/common-pci.c
@@ -480,12 +480,6 @@ int ixp4xx_setup(int nr, struct pci_sys_data *sys)
 	return 1;
 }
 
-struct pci_bus * __devinit ixp4xx_scan_bus(int nr, struct pci_sys_data *sys)
-{
-	return pci_scan_root_bus(NULL, sys->busnr, &ixp4xx_ops, sys,
-				 &sys->resources);
-}
-
 int dma_set_coherent_mask(struct device *dev, u64 mask)
 {
 	if (mask >= SZ_64M - 1)
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index ebbd7fc90eb4..a9f80943d01f 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -28,6 +28,7 @@
 #include <linux/clockchips.h>
 #include <linux/io.h>
 #include <linux/export.h>
+#include <linux/gpio.h>
 
 #include <mach/udc.h>
 #include <mach/hardware.h>
@@ -107,7 +108,7 @@ static signed char irq2gpio[32] = {
 	 7,  8,  9, 10, 11, 12, -1, -1,
 };
 
-int gpio_to_irq(int gpio)
+static int ixp4xx_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
 {
 	int irq;
 
@@ -117,7 +118,6 @@ int gpio_to_irq(int gpio)
 	}
 	return -EINVAL;
 }
-EXPORT_SYMBOL(gpio_to_irq);
 
 int irq_to_gpio(unsigned int irq)
 {
@@ -383,12 +383,56 @@ static struct platform_device *ixp46x_devices[] __initdata = {
 unsigned long ixp4xx_exp_bus_size;
 EXPORT_SYMBOL(ixp4xx_exp_bus_size);
 
+static int ixp4xx_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
+{
+	gpio_line_config(gpio, IXP4XX_GPIO_IN);
+
+	return 0;
+}
+
+static int ixp4xx_gpio_direction_output(struct gpio_chip *chip, unsigned gpio,
+					int level)
+{
+	gpio_line_set(gpio, level);
+	gpio_line_config(gpio, IXP4XX_GPIO_OUT);
+
+	return 0;
+}
+
+static int ixp4xx_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
+{
+	int value;
+
+	gpio_line_get(gpio, &value);
+
+	return value;
+}
+
+static void ixp4xx_gpio_set_value(struct gpio_chip *chip, unsigned gpio,
+				  int value)
+{
+	gpio_line_set(gpio, value);
+}
+
+static struct gpio_chip ixp4xx_gpio_chip = {
+	.label			= "IXP4XX_GPIO_CHIP",
+	.direction_input	= ixp4xx_gpio_direction_input,
+	.direction_output	= ixp4xx_gpio_direction_output,
+	.get			= ixp4xx_gpio_get_value,
+	.set			= ixp4xx_gpio_set_value,
+	.to_irq			= ixp4xx_gpio_to_irq,
+	.base			= 0,
+	.ngpio			= 16,
+};
+
 void __init ixp4xx_sys_init(void)
 {
 	ixp4xx_exp_bus_size = SZ_16M;
 
 	platform_add_devices(ixp4xx_devices, ARRAY_SIZE(ixp4xx_devices));
 
+	gpiochip_add(&ixp4xx_gpio_chip);
+
 	if (cpu_is_ixp46x()) {
 		int region;
 
diff --git a/arch/arm/mach-ixp4xx/coyote-pci.c b/arch/arm/mach-ixp4xx/coyote-pci.c
index 71f5c9c60fc3..5d14ce2aee6d 100644
--- a/arch/arm/mach-ixp4xx/coyote-pci.c
+++ b/arch/arm/mach-ixp4xx/coyote-pci.c
@@ -48,10 +48,9 @@ static int __init coyote_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 
 struct hw_pci coyote_pci __initdata = {
 	.nr_controllers = 1,
+	.ops		= &ixp4xx_ops,
 	.preinit =        coyote_pci_preinit,
-	.swizzle =        pci_std_swizzle,
 	.setup =          ixp4xx_setup,
-	.scan =           ixp4xx_scan_bus,
 	.map_irq =        coyote_map_irq,
 };
 
diff --git a/arch/arm/mach-ixp4xx/dsmg600-pci.c b/arch/arm/mach-ixp4xx/dsmg600-pci.c
index 0532510b5e8c..8dca76937723 100644
--- a/arch/arm/mach-ixp4xx/dsmg600-pci.c
+++ b/arch/arm/mach-ixp4xx/dsmg600-pci.c
@@ -62,10 +62,9 @@ static int __init dsmg600_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 
 struct hw_pci __initdata dsmg600_pci = {
 	.nr_controllers = 1,
+	.ops		= &ixp4xx_ops,
 	.preinit	= dsmg600_pci_preinit,
-	.swizzle	= pci_std_swizzle,
 	.setup		= ixp4xx_setup,
-	.scan		= ixp4xx_scan_bus,
 	.map_irq	= dsmg600_map_irq,
 };
 
diff --git a/arch/arm/mach-ixp4xx/fsg-pci.c b/arch/arm/mach-ixp4xx/fsg-pci.c
index d2ac803328f7..fd4a8625b4ae 100644
--- a/arch/arm/mach-ixp4xx/fsg-pci.c
+++ b/arch/arm/mach-ixp4xx/fsg-pci.c
@@ -59,10 +59,9 @@ static int __init fsg_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 
 struct hw_pci fsg_pci __initdata = {
 	.nr_controllers = 1,
+	.ops		= &ixp4xx_ops,
 	.preinit =	  fsg_pci_preinit,
-	.swizzle =	  pci_std_swizzle,
 	.setup =	  ixp4xx_setup,
-	.scan =		  ixp4xx_scan_bus,
 	.map_irq =	  fsg_map_irq,
 };
 
diff --git a/arch/arm/mach-ixp4xx/gateway7001-pci.c b/arch/arm/mach-ixp4xx/gateway7001-pci.c
index 76581fb467c4..d9d6cc089707 100644
--- a/arch/arm/mach-ixp4xx/gateway7001-pci.c
+++ b/arch/arm/mach-ixp4xx/gateway7001-pci.c
@@ -47,10 +47,9 @@ static int __init gateway7001_map_irq(const struct pci_dev *dev, u8 slot,
 
 struct hw_pci gateway7001_pci __initdata = {
 	.nr_controllers = 1,
+	.ops		= &ixp4xx_ops,
 	.preinit =        gateway7001_pci_preinit,
-	.swizzle =        pci_std_swizzle,
 	.setup =          ixp4xx_setup,
-	.scan =           ixp4xx_scan_bus,
 	.map_irq =        gateway7001_map_irq,
 };
 
diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c
index 46bb924962ee..b800a031207c 100644
--- a/arch/arm/mach-ixp4xx/goramo_mlr.c
+++ b/arch/arm/mach-ixp4xx/goramo_mlr.c
@@ -473,11 +473,10 @@ static int __init gmlr_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 
 static struct hw_pci gmlr_hw_pci __initdata = {
 	.nr_controllers = 1,
+	.ops		= &ixp4xx_ops,
 	.preinit	= gmlr_pci_preinit,
 	.postinit	= gmlr_pci_postinit,
-	.swizzle	= pci_std_swizzle,
 	.setup		= ixp4xx_setup,
-	.scan		= ixp4xx_scan_bus,
 	.map_irq	= gmlr_map_irq,
 };
 
diff --git a/arch/arm/mach-ixp4xx/gtwx5715-pci.c b/arch/arm/mach-ixp4xx/gtwx5715-pci.c
index d68fc068c38d..551d114c9e14 100644
--- a/arch/arm/mach-ixp4xx/gtwx5715-pci.c
+++ b/arch/arm/mach-ixp4xx/gtwx5715-pci.c
@@ -67,10 +67,9 @@ static int __init gtwx5715_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 
 struct hw_pci gtwx5715_pci __initdata = {
 	.nr_controllers = 1,
+	.ops		= &ixp4xx_ops,
 	.preinit =        gtwx5715_pci_preinit,
-	.swizzle =        pci_std_swizzle,
 	.setup =          ixp4xx_setup,
-	.scan =           ixp4xx_scan_bus,
 	.map_irq =        gtwx5715_map_irq,
 };
 
diff --git a/arch/arm/mach-ixp4xx/include/mach/gpio.h b/arch/arm/mach-ixp4xx/include/mach/gpio.h
index 83d6b4ed60bb..ef37f2635b0e 100644
--- a/arch/arm/mach-ixp4xx/include/mach/gpio.h
+++ b/arch/arm/mach-ixp4xx/include/mach/gpio.h
@@ -1,79 +1,2 @@
-/*
- * arch/arm/mach-ixp4xx/include/mach/gpio.h
- *
- * IXP4XX GPIO wrappers for arch-neutral GPIO calls
- *
- * Written by Milan Svoboda <msvoboda@ra.rockwell.com>
- * Based on PXA implementation by Philipp Zabel <philipp.zabel@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef __ASM_ARCH_IXP4XX_GPIO_H
-#define __ASM_ARCH_IXP4XX_GPIO_H
-
-#include <linux/kernel.h>
-#include <mach/hardware.h>
-
-#define __ARM_GPIOLIB_COMPLEX
-
-static inline int gpio_request(unsigned gpio, const char *label)
-{
-	return 0;
-}
-
-static inline void gpio_free(unsigned gpio)
-{
-	might_sleep();
-
-	return;
-}
-
-static inline int gpio_direction_input(unsigned gpio)
-{
-	gpio_line_config(gpio, IXP4XX_GPIO_IN);
-	return 0;
-}
-
-static inline int gpio_direction_output(unsigned gpio, int level)
-{
-	gpio_line_set(gpio, level);
-	gpio_line_config(gpio, IXP4XX_GPIO_OUT);
-	return 0;
-}
-
-static inline int gpio_get_value(unsigned gpio)
-{
-	int value;
-
-	gpio_line_get(gpio, &value);
-
-	return value;
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-	gpio_line_set(gpio, value);
-}
-
-#include <asm-generic/gpio.h>			/* cansleep wrappers */
-
-extern int gpio_to_irq(int gpio);
-#define gpio_to_irq gpio_to_irq
-extern int irq_to_gpio(unsigned int irq);
-
-#endif
+/* empty */
 
diff --git a/arch/arm/mach-ixp4xx/include/mach/ixp46x_ts.h b/arch/arm/mach-ixp4xx/include/mach/ixp46x_ts.h
index 292d55ed2113..cf03614d250d 100644
--- a/arch/arm/mach-ixp4xx/include/mach/ixp46x_ts.h
+++ b/arch/arm/mach-ixp4xx/include/mach/ixp46x_ts.h
@@ -75,4 +75,7 @@ struct ixp46x_ts_regs {
 #define TX_SNAPSHOT_LOCKED (1<<0)
 #define RX_SNAPSHOT_LOCKED (1<<1)
 
+/* The ptp_ixp46x module will set this variable */
+extern int ixp46x_phc_index;
+
 #endif
diff --git a/arch/arm/mach-ixp4xx/include/mach/platform.h b/arch/arm/mach-ixp4xx/include/mach/platform.h
index b66bedc64de1..5bce94aacca9 100644
--- a/arch/arm/mach-ixp4xx/include/mach/platform.h
+++ b/arch/arm/mach-ixp4xx/include/mach/platform.h
@@ -130,7 +130,7 @@ extern void ixp4xx_restart(char, const char *);
 extern void ixp4xx_pci_preinit(void);
 struct pci_sys_data;
 extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
-extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
+extern struct pci_ops ixp4xx_ops;
 
 /*
  * GPIO-functions
diff --git a/arch/arm/mach-ixp4xx/ixdp425-pci.c b/arch/arm/mach-ixp4xx/ixdp425-pci.c
index fffd8c5e40bf..318424dd3c50 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-pci.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c
@@ -60,10 +60,9 @@ static int __init ixdp425_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 
 struct hw_pci ixdp425_pci __initdata = {
 	.nr_controllers = 1,
+	.ops		= &ixp4xx_ops,
 	.preinit	= ixdp425_pci_preinit,
-	.swizzle	= pci_std_swizzle,
 	.setup		= ixp4xx_setup,
-	.scan		= ixp4xx_scan_bus,
 	.map_irq	= ixdp425_map_irq,
 };
 
diff --git a/arch/arm/mach-ixp4xx/ixdpg425-pci.c b/arch/arm/mach-ixp4xx/ixdpg425-pci.c
index 34efe75015ec..1f8717ba13dc 100644
--- a/arch/arm/mach-ixp4xx/ixdpg425-pci.c
+++ b/arch/arm/mach-ixp4xx/ixdpg425-pci.c
@@ -42,10 +42,9 @@ static int __init ixdpg425_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 
 struct hw_pci ixdpg425_pci __initdata = {
 	.nr_controllers = 1,
+	.ops		= &ixp4xx_ops,
 	.preinit =        ixdpg425_pci_preinit,
-	.swizzle =        pci_std_swizzle,
 	.setup =          ixp4xx_setup,
-	.scan =           ixp4xx_scan_bus,
 	.map_irq =        ixdpg425_map_irq,
 };
 
diff --git a/arch/arm/mach-ixp4xx/miccpt-pci.c b/arch/arm/mach-ixp4xx/miccpt-pci.c
index ca0bae7fca90..d114ccd2017c 100644
--- a/arch/arm/mach-ixp4xx/miccpt-pci.c
+++ b/arch/arm/mach-ixp4xx/miccpt-pci.c
@@ -61,10 +61,9 @@ static int __init miccpt_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 
 struct hw_pci miccpt_pci __initdata = {
 	.nr_controllers = 1,
+	.ops		= &ixp4xx_ops,
 	.preinit	= miccpt_pci_preinit,
-	.swizzle	= pci_std_swizzle,
 	.setup		= ixp4xx_setup,
-	.scan		= ixp4xx_scan_bus,
 	.map_irq	= miccpt_map_irq,
 };
 
diff --git a/arch/arm/mach-ixp4xx/nas100d-pci.c b/arch/arm/mach-ixp4xx/nas100d-pci.c
index 5434ccf553eb..8f0eba0a6800 100644
--- a/arch/arm/mach-ixp4xx/nas100d-pci.c
+++ b/arch/arm/mach-ixp4xx/nas100d-pci.c
@@ -58,10 +58,9 @@ static int __init nas100d_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 
 struct hw_pci __initdata nas100d_pci = {
 	.nr_controllers = 1,
+	.ops		= &ixp4xx_ops,
 	.preinit	= nas100d_pci_preinit,
-	.swizzle	= pci_std_swizzle,
 	.setup		= ixp4xx_setup,
-	.scan		= ixp4xx_scan_bus,
 	.map_irq	= nas100d_map_irq,
 };
 
diff --git a/arch/arm/mach-ixp4xx/nslu2-pci.c b/arch/arm/mach-ixp4xx/nslu2-pci.c
index b57160535e47..032defe111aa 100644
--- a/arch/arm/mach-ixp4xx/nslu2-pci.c
+++ b/arch/arm/mach-ixp4xx/nslu2-pci.c
@@ -54,10 +54,9 @@ static int __init nslu2_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 
 struct hw_pci __initdata nslu2_pci = {
 	.nr_controllers = 1,
+	.ops		= &ixp4xx_ops,
 	.preinit	= nslu2_pci_preinit,
-	.swizzle	= pci_std_swizzle,
 	.setup		= ixp4xx_setup,
-	.scan		= ixp4xx_scan_bus,
 	.map_irq	= nslu2_map_irq,
 };
 
diff --git a/arch/arm/mach-ixp4xx/vulcan-pci.c b/arch/arm/mach-ixp4xx/vulcan-pci.c
index 0bc3f34c282f..a4220fa5e0c3 100644
--- a/arch/arm/mach-ixp4xx/vulcan-pci.c
+++ b/arch/arm/mach-ixp4xx/vulcan-pci.c
@@ -56,10 +56,9 @@ static int __init vulcan_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 
 struct hw_pci vulcan_pci __initdata = {
 	.nr_controllers	= 1,
+	.ops		= &ixp4xx_ops,
 	.preinit	= vulcan_pci_preinit,
-	.swizzle	= pci_std_swizzle,
 	.setup		= ixp4xx_setup,
-	.scan		= ixp4xx_scan_bus,
 	.map_irq	= vulcan_map_irq,
 };
 
diff --git a/arch/arm/mach-ixp4xx/wg302v2-pci.c b/arch/arm/mach-ixp4xx/wg302v2-pci.c
index f27dfcfe811b..c92e5b82af36 100644
--- a/arch/arm/mach-ixp4xx/wg302v2-pci.c
+++ b/arch/arm/mach-ixp4xx/wg302v2-pci.c
@@ -46,10 +46,9 @@ static int __init wg302v2_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 
 struct hw_pci wg302v2_pci __initdata = {
 	.nr_controllers = 1,
+	.ops = &ixp4xx_ops,
 	.preinit =        wg302v2_pci_preinit,
-	.swizzle =        pci_std_swizzle,
 	.setup =          ixp4xx_setup,
-	.scan =           ixp4xx_scan_bus,
 	.map_irq =        wg302v2_map_irq,
 };
 
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index 90ceab761929..199764fe0fb0 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -58,6 +58,28 @@ config MACH_DREAMPLUG_DT
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell DreamPlug (Flattened Device Tree).
 
+config MACH_ICONNECT_DT
+	bool "Iomega Iconnect (Flattened Device Tree)"
+	select ARCH_KIRKWOOD_DT
+	help
+	  Say 'Y' here to enable Iomega Iconnect support.
+
+config MACH_DLINK_KIRKWOOD_DT
+	bool "D-Link Kirkwood-based NAS (Flattened Device Tree)"
+	select ARCH_KIRKWOOD_DT
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Kirkwood-based D-Link NASes such as DNS-320 & DNS-325,
+	  using Flattened Device Tree.
+
+config MACH_IB62X0_DT
+	bool "RaidSonic IB-NAS6210, IB-NAS6220 (Flattened Device Tree)"
+	select ARCH_KIRKWOOD_DT
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  RaidSonic IB-NAS6210 & IB-NAS6220 devices, using
+	  Flattened Device Tree.
+
 config MACH_TS219
 	bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS"
 	help
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index e299a9576bf0..d2b05907b10e 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -22,3 +22,6 @@ obj-$(CONFIG_MACH_T5325)		+= t5325-setup.o
 obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o
 obj-$(CONFIG_ARCH_KIRKWOOD_DT)		+= board-dt.o
 obj-$(CONFIG_MACH_DREAMPLUG_DT)		+= board-dreamplug.o
+obj-$(CONFIG_MACH_ICONNECT_DT)		+= board-iconnect.o
+obj-$(CONFIG_MACH_DLINK_KIRKWOOD_DT)	+= board-dnskw.o
+obj-$(CONFIG_MACH_IB62X0_DT)		+= board-ib62x0.o
diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot
index 16f938522304..02edbdf5b065 100644
--- a/arch/arm/mach-kirkwood/Makefile.boot
+++ b/arch/arm/mach-kirkwood/Makefile.boot
@@ -3,3 +3,7 @@ params_phys-y	:= 0x00000100
 initrd_phys-y	:= 0x00800000
 
 dtb-$(CONFIG_MACH_DREAMPLUG_DT) += kirkwood-dreamplug.dtb
+dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns320.dtb
+dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns325.dtb
+dtb-$(CONFIG_MACH_ICONNECT_DT) += kirkwood-iconnect.dtb
+dtb-$(CONFIG_MACH_IB62X0_DT) += kirkwood-ib62x0.dtb
diff --git a/arch/arm/mach-kirkwood/board-dnskw.c b/arch/arm/mach-kirkwood/board-dnskw.c
new file mode 100644
index 000000000000..58c2d68f9443
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-dnskw.c
@@ -0,0 +1,275 @@
+/*
+ * Copyright 2012 (C), Jamie Lentin <jm@lentin.co.uk>
+ *
+ * arch/arm/mach-kirkwood/board-dnskw.c
+ *
+ * D-link DNS-320 & DNS-325 NAS Init for drivers not converted to
+ * flattened device tree yet.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/of.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <linux/gpio-fan.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <mach/kirkwood.h>
+#include <mach/bridge-regs.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mv643xx_eth_platform_data dnskw_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv_sata_platform_data dnskw_sata_data = {
+	.n_ports	= 2,
+};
+
+static unsigned int dnskw_mpp_config[] __initdata = {
+	MPP13_UART1_TXD,	/* Custom ... */
+	MPP14_UART1_RXD,	/* ... Controller (DNS-320 only) */
+	MPP20_SATA1_ACTn,	/* LED: White Right HDD */
+	MPP21_SATA0_ACTn,	/* LED: White Left HDD */
+	MPP24_GPIO,
+	MPP25_GPIO,
+	MPP26_GPIO,	/* LED: Power */
+	MPP27_GPIO,	/* LED: Red Right HDD */
+	MPP28_GPIO,	/* LED: Red Left HDD */
+	MPP29_GPIO,	/* LED: Red USB (DNS-325 only) */
+	MPP30_GPIO,
+	MPP31_GPIO,
+	MPP32_GPIO,
+	MPP33_GPO,
+	MPP34_GPIO,	/* Button: Front power */
+	MPP35_GPIO,	/* LED: Red USB (DNS-320 only) */
+	MPP36_GPIO,	/* Power: Turn off board */
+	MPP37_GPIO,	/* Power: Turn back on after power failure */
+	MPP38_GPIO,
+	MPP39_GPIO,	/* Power: SATA0 */
+	MPP40_GPIO,	/* Power: SATA1 */
+	MPP41_GPIO,	/* SATA0 present */
+	MPP42_GPIO,	/* SATA1 present */
+	MPP43_GPIO,	/* LED: White USB */
+	MPP44_GPIO,	/* Fan: Tachometer Pin */
+	MPP45_GPIO,	/* Fan: high speed */
+	MPP46_GPIO,	/* Fan: low speed */
+	MPP47_GPIO,	/* Button: Back unmount */
+	MPP48_GPIO,	/* Button: Back reset */
+	MPP49_GPIO,	/* Temp Alarm (DNS-325) Pin of U5 (DNS-320) */
+	0
+};
+
+static struct gpio_led dns325_led_pins[] = {
+	{
+		.name	= "dns325:white:power",
+		.gpio	= 26,
+		.active_low = 1,
+		.default_trigger = "default-on",
+	},
+	{
+		.name	= "dns325:white:usb",
+		.gpio	= 43,
+		.active_low = 1,
+	},
+	{
+		.name	= "dns325:red:l_hdd",
+		.gpio	= 28,
+		.active_low = 1,
+	},
+	{
+		.name	= "dns325:red:r_hdd",
+		.gpio	= 27,
+		.active_low = 1,
+	},
+	{
+		.name	= "dns325:red:usb",
+		.gpio	= 29,
+		.active_low = 1,
+	},
+};
+
+static struct gpio_led_platform_data dns325_led_data = {
+	.num_leds	= ARRAY_SIZE(dns325_led_pins),
+	.leds		= dns325_led_pins,
+};
+
+static struct platform_device dns325_led_device = {
+	.name		= "leds-gpio",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &dns325_led_data,
+	},
+};
+
+static struct gpio_led dns320_led_pins[] = {
+	{
+		.name	= "dns320:blue:power",
+		.gpio	= 26,
+		.active_low = 1,
+		.default_trigger = "default-on",
+	},
+	{
+		.name	= "dns320:blue:usb",
+		.gpio	= 43,
+		.active_low = 1,
+	},
+	{
+		.name	= "dns320:orange:l_hdd",
+		.gpio	= 28,
+		.active_low = 1,
+	},
+	{
+		.name	= "dns320:orange:r_hdd",
+		.gpio	= 27,
+		.active_low = 1,
+	},
+	{
+		.name	= "dns320:orange:usb",
+		.gpio	= 35,
+		.active_low = 1,
+	},
+};
+
+static struct gpio_led_platform_data dns320_led_data = {
+	.num_leds	= ARRAY_SIZE(dns320_led_pins),
+	.leds		= dns320_led_pins,
+};
+
+static struct platform_device dns320_led_device = {
+	.name		= "leds-gpio",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &dns320_led_data,
+	},
+};
+
+static struct i2c_board_info dns325_i2c_board_info[] __initdata = {
+	{
+		I2C_BOARD_INFO("lm75", 0x48),
+	},
+	/* Something at 0x0c also */
+};
+
+static struct gpio_keys_button dnskw_button_pins[] = {
+	{
+		.code		= KEY_POWER,
+		.gpio		= 34,
+		.desc		= "Power button",
+		.active_low	= 1,
+	},
+	{
+		.code		= KEY_EJECTCD,
+		.gpio		= 47,
+		.desc		= "USB unmount button",
+		.active_low	= 1,
+	},
+	{
+		.code		= KEY_RESTART,
+		.gpio		= 48,
+		.desc		= "Reset button",
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data dnskw_button_data = {
+	.buttons	= dnskw_button_pins,
+	.nbuttons	= ARRAY_SIZE(dnskw_button_pins),
+};
+
+static struct platform_device dnskw_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &dnskw_button_data,
+	}
+};
+
+/* Fan: ADDA AD045HB-G73 40mm 6000rpm@5v */
+static struct gpio_fan_speed dnskw_fan_speed[] = {
+	{    0,  0 },
+	{ 3000,	 1 },
+	{ 6000,	 2 },
+};
+static unsigned dnskw_fan_pins[] = {46, 45};
+
+static struct gpio_fan_platform_data dnskw_fan_data = {
+	.num_ctrl	= ARRAY_SIZE(dnskw_fan_pins),
+	.ctrl		= dnskw_fan_pins,
+	.num_speed	= ARRAY_SIZE(dnskw_fan_speed),
+	.speed		= dnskw_fan_speed,
+};
+
+static struct platform_device dnskw_fan_device = {
+	.name	= "gpio-fan",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &dnskw_fan_data,
+	},
+};
+
+static void dnskw_power_off(void)
+{
+	gpio_set_value(36, 1);
+}
+
+/* Register any GPIO for output and set the value */
+static void __init dnskw_gpio_register(unsigned gpio, char *name, int def)
+{
+	if (gpio_request(gpio, name) == 0 &&
+	    gpio_direction_output(gpio, 0) == 0) {
+		gpio_set_value(gpio, def);
+		if (gpio_export(gpio, 0) != 0)
+			pr_err("dnskw: Failed to export GPIO %s\n", name);
+	} else
+		pr_err("dnskw: Failed to register %s\n", name);
+}
+
+void __init dnskw_init(void)
+{
+	kirkwood_mpp_conf(dnskw_mpp_config);
+
+	kirkwood_ehci_init();
+	kirkwood_ge00_init(&dnskw_ge00_data);
+	kirkwood_sata_init(&dnskw_sata_data);
+	kirkwood_i2c_init();
+
+	platform_device_register(&dnskw_button_device);
+	platform_device_register(&dnskw_fan_device);
+
+	if (of_machine_is_compatible("dlink,dns-325")) {
+		i2c_register_board_info(0, dns325_i2c_board_info,
+					ARRAY_SIZE(dns325_i2c_board_info));
+		platform_device_register(&dns325_led_device);
+
+	} else if (of_machine_is_compatible("dlink,dns-320"))
+		platform_device_register(&dns320_led_device);
+
+	/* Register power-off GPIO. */
+	if (gpio_request(36, "dnskw:power:off") == 0
+	    && gpio_direction_output(36, 0) == 0)
+		pm_power_off = dnskw_power_off;
+	else
+		pr_err("dnskw: failed to configure power-off GPIO\n");
+
+	/* Ensure power is supplied to both HDDs */
+	dnskw_gpio_register(39, "dnskw:power:sata0", 1);
+	dnskw_gpio_register(40, "dnskw:power:sata1", 1);
+
+	/* Set NAS to turn back on after a power failure */
+	dnskw_gpio_register(37, "dnskw:power:recover", 1);
+}
diff --git a/arch/arm/mach-kirkwood/board-dreamplug.c b/arch/arm/mach-kirkwood/board-dreamplug.c
index 985453994dd3..55e357ab2923 100644
--- a/arch/arm/mach-kirkwood/board-dreamplug.c
+++ b/arch/arm/mach-kirkwood/board-dreamplug.c
@@ -27,7 +27,6 @@
 #include <linux/mtd/physmap.h>
 #include <linux/spi/flash.h>
 #include <linux/spi/spi.h>
-#include <linux/spi/orion_spi.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
index 1c672d9e6656..edc3f8a9d45e 100644
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -14,6 +14,7 @@
 #include <linux/init.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
+#include <linux/kexec.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <mach/bridge-regs.h>
@@ -42,6 +43,9 @@ static void __init kirkwood_dt_init(void)
 	kirkwood_l2_init();
 #endif
 
+	/* Setup root of clk tree */
+	kirkwood_clk_init();
+
 	/* internal devices that every board has */
 	kirkwood_wdt_init();
 	kirkwood_xor0_init();
@@ -55,11 +59,24 @@ static void __init kirkwood_dt_init(void)
 	if (of_machine_is_compatible("globalscale,dreamplug"))
 		dreamplug_init();
 
+	if (of_machine_is_compatible("dlink,dns-kirkwood"))
+		dnskw_init();
+
+	if (of_machine_is_compatible("iom,iconnect"))
+		iconnect_init();
+
+	if (of_machine_is_compatible("raidsonic,ib-nas62x0"))
+		ib62x0_init();
+
 	of_platform_populate(NULL, kirkwood_dt_match_table, NULL, NULL);
 }
 
 static const char *kirkwood_dt_board_compat[] = {
 	"globalscale,dreamplug",
+	"dlink,dns-320",
+	"dlink,dns-325",
+	"iom,iconnect",
+	"raidsonic,ib-nas62x0",
 	NULL
 };
 
diff --git a/arch/arm/mach-kirkwood/board-ib62x0.c b/arch/arm/mach-kirkwood/board-ib62x0.c
new file mode 100644
index 000000000000..eddf1df8891f
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-ib62x0.c
@@ -0,0 +1,143 @@
+/*
+ * Copyright 2012 (C), Simon Baatz <gmbnomis@gmail.com>
+ *
+ * arch/arm/mach-kirkwood/board-ib62x0.c
+ *
+ * RaidSonic ICY BOX IB-NAS6210 & IB-NAS6220 init for drivers not
+ * converted to flattened device tree yet.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+
+#define IB62X0_GPIO_POWER_OFF	24
+
+static struct mv643xx_eth_platform_data ib62x0_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv_sata_platform_data ib62x0_sata_data = {
+	.n_ports	= 2,
+};
+
+static unsigned int ib62x0_mpp_config[] __initdata = {
+	MPP0_NF_IO2,
+	MPP1_NF_IO3,
+	MPP2_NF_IO4,
+	MPP3_NF_IO5,
+	MPP4_NF_IO6,
+	MPP5_NF_IO7,
+	MPP18_NF_IO0,
+	MPP19_NF_IO1,
+	MPP22_GPIO,	/* OS LED red */
+	MPP24_GPIO,	/* Power off device */
+	MPP25_GPIO,	/* OS LED green */
+	MPP27_GPIO,	/* USB transfer LED */
+	MPP28_GPIO,	/* Reset button */
+	MPP29_GPIO,	/* USB Copy button */
+	0
+};
+
+static struct gpio_led ib62x0_led_pins[] = {
+	{
+		.name			= "ib62x0:green:os",
+		.default_trigger	= "default-on",
+		.gpio			= 25,
+		.active_low		= 0,
+	},
+	{
+		.name			= "ib62x0:red:os",
+		.default_trigger	= "none",
+		.gpio			= 22,
+		.active_low		= 0,
+	},
+	{
+		.name			= "ib62x0:red:usb_copy",
+		.default_trigger	= "none",
+		.gpio			= 27,
+		.active_low		= 0,
+	},
+};
+
+static struct gpio_led_platform_data ib62x0_led_data = {
+	.leds		= ib62x0_led_pins,
+	.num_leds	= ARRAY_SIZE(ib62x0_led_pins),
+};
+
+static struct platform_device ib62x0_led_device = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &ib62x0_led_data,
+	}
+};
+
+static struct gpio_keys_button ib62x0_button_pins[] = {
+	{
+		.code		= KEY_COPY,
+		.gpio		= 29,
+		.desc		= "USB Copy",
+		.active_low	= 1,
+	},
+	{
+		.code		= KEY_RESTART,
+		.gpio		= 28,
+		.desc		= "Reset",
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data ib62x0_button_data = {
+	.buttons	= ib62x0_button_pins,
+	.nbuttons	= ARRAY_SIZE(ib62x0_button_pins),
+};
+
+static struct platform_device ib62x0_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &ib62x0_button_data,
+	}
+};
+
+static void ib62x0_power_off(void)
+{
+	gpio_set_value(IB62X0_GPIO_POWER_OFF, 1);
+}
+
+void __init ib62x0_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_mpp_conf(ib62x0_mpp_config);
+
+	kirkwood_ehci_init();
+	kirkwood_ge00_init(&ib62x0_ge00_data);
+	kirkwood_sata_init(&ib62x0_sata_data);
+	platform_device_register(&ib62x0_led_device);
+	platform_device_register(&ib62x0_button_device);
+	if (gpio_request(IB62X0_GPIO_POWER_OFF, "ib62x0:power:off") == 0 &&
+	    gpio_direction_output(IB62X0_GPIO_POWER_OFF, 0) == 0)
+		pm_power_off = ib62x0_power_off;
+	else
+		pr_err("board-ib62x0: failed to configure power-off GPIO\n");
+}
diff --git a/arch/arm/mach-kirkwood/board-iconnect.c b/arch/arm/mach-kirkwood/board-iconnect.c
new file mode 100644
index 000000000000..2222c5739519
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-iconnect.c
@@ -0,0 +1,165 @@
+/*
+ * arch/arm/mach-kirkwood/board-iconnect.c
+ *
+ * Iomega i-connect Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_fdt.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/orion_spi.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mv643xx_eth_platform_data iconnect_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(11),
+};
+
+static struct gpio_led iconnect_led_pins[] = {
+	{
+		.name		= "led_level",
+		.gpio		= 41,
+		.default_trigger = "default-on",
+	}, {
+		.name		= "power:blue",
+		.gpio		= 42,
+		.default_trigger = "timer",
+	}, {
+		.name		= "power:red",
+		.gpio		= 43,
+	}, {
+		.name		= "usb1:blue",
+		.gpio		= 44,
+	}, {
+		.name		= "usb2:blue",
+		.gpio		= 45,
+	}, {
+		.name		= "usb3:blue",
+		.gpio		= 46,
+	}, {
+		.name		= "usb4:blue",
+		.gpio		= 47,
+	}, {
+		.name		= "otb:blue",
+		.gpio		= 48,
+	},
+};
+
+static struct gpio_led_platform_data iconnect_led_data = {
+	.leds		= iconnect_led_pins,
+	.num_leds	= ARRAY_SIZE(iconnect_led_pins),
+	.gpio_blink_set	= orion_gpio_led_blink_set,
+};
+
+static struct platform_device iconnect_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &iconnect_led_data,
+	}
+};
+
+static unsigned int iconnect_mpp_config[] __initdata = {
+	MPP12_GPIO,
+	MPP35_GPIO,
+	MPP41_GPIO,
+	MPP42_GPIO,
+	MPP43_GPIO,
+	MPP44_GPIO,
+	MPP45_GPIO,
+	MPP46_GPIO,
+	MPP47_GPIO,
+	MPP48_GPIO,
+	0
+};
+
+static struct i2c_board_info __initdata iconnect_board_info[] = {
+	{
+		I2C_BOARD_INFO("lm63", 0x4c),
+	},
+};
+
+static struct mtd_partition iconnect_nand_parts[] = {
+	{
+		.name = "flash",
+		.offset = 0,
+		.size = MTDPART_SIZ_FULL,
+	},
+};
+
+/* yikes... theses are the original input buttons */
+/* but I'm not convinced by the sw event choices  */
+static struct gpio_keys_button iconnect_buttons[] = {
+	{
+		.type		= EV_SW,
+		.code		= SW_LID,
+		.gpio		= 12,
+		.desc		= "Reset Button",
+		.active_low	= 1,
+		.debounce_interval = 100,
+	}, {
+		.type		= EV_SW,
+		.code		= SW_TABLET_MODE,
+		.gpio		= 35,
+		.desc		= "OTB Button",
+		.active_low	= 1,
+		.debounce_interval = 100,
+	},
+};
+
+static struct gpio_keys_platform_data iconnect_button_data = {
+	.buttons	= iconnect_buttons,
+	.nbuttons	= ARRAY_SIZE(iconnect_buttons),
+};
+
+static struct platform_device iconnect_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev        = {
+		.platform_data  = &iconnect_button_data,
+	},
+};
+
+void __init iconnect_init(void)
+{
+	kirkwood_mpp_conf(iconnect_mpp_config);
+	kirkwood_nand_init(ARRAY_AND_SIZE(iconnect_nand_parts), 25);
+	kirkwood_i2c_init();
+	i2c_register_board_info(0, iconnect_board_info,
+		ARRAY_SIZE(iconnect_board_info));
+
+	kirkwood_ehci_init();
+	kirkwood_ge00_init(&iconnect_ge00_data);
+
+	platform_device_register(&iconnect_button_device);
+	platform_device_register(&iconnect_leds);
+}
+
+static int __init iconnect_pci_init(void)
+{
+	if (of_machine_is_compatible("iom,iconnect"))
+		kirkwood_pcie_init(KW_PCIE0);
+	return 0;
+}
+subsys_initcall(iconnect_pci_init);
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index a02cae881f2f..25fb3fd418ef 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -15,6 +15,8 @@
 #include <linux/ata_platform.h>
 #include <linux/mtd/nand.h>
 #include <linux/dma-mapping.h>
+#include <linux/clk-provider.h>
+#include <linux/spinlock.h>
 #include <net/dsa.h>
 #include <asm/page.h>
 #include <asm/timex.h>
@@ -31,6 +33,7 @@
 #include <plat/common.h>
 #include <plat/time.h>
 #include <plat/addr-map.h>
+#include <plat/mv_xor.h>
 #include "common.h"
 
 /*****************************************************************************
@@ -60,20 +63,188 @@ void __init kirkwood_map_io(void)
 	iotable_init(kirkwood_io_desc, ARRAY_SIZE(kirkwood_io_desc));
 }
 
-/*
- * Default clock control bits.  Any bit _not_ set in this variable
- * will be cleared from the hardware after platform devices have been
- * registered.  Some reserved bits must be set to 1.
- */
-unsigned int kirkwood_clk_ctrl = CGC_DUNIT | CGC_RESERVED;
+/*****************************************************************************
+ * CLK tree
+ ****************************************************************************/
+
+static void disable_sata0(void)
+{
+	/* Disable PLL and IVREF */
+	writel(readl(SATA0_PHY_MODE_2) & ~0xf, SATA0_PHY_MODE_2);
+	/* Disable PHY */
+	writel(readl(SATA0_IF_CTRL) | 0x200, SATA0_IF_CTRL);
+}
+
+static void disable_sata1(void)
+{
+	/* Disable PLL and IVREF */
+	writel(readl(SATA1_PHY_MODE_2) & ~0xf, SATA1_PHY_MODE_2);
+	/* Disable PHY */
+	writel(readl(SATA1_IF_CTRL) | 0x200, SATA1_IF_CTRL);
+}
+
+static void disable_pcie0(void)
+{
+	writel(readl(PCIE_LINK_CTRL) | 0x10, PCIE_LINK_CTRL);
+	while (1)
+		if (readl(PCIE_STATUS) & 0x1)
+			break;
+	writel(readl(PCIE_LINK_CTRL) & ~0x10, PCIE_LINK_CTRL);
+}
+
+static void disable_pcie1(void)
+{
+	u32 dev, rev;
+
+	kirkwood_pcie_id(&dev, &rev);
+
+	if (dev == MV88F6282_DEV_ID) {
+		writel(readl(PCIE1_LINK_CTRL) | 0x10, PCIE1_LINK_CTRL);
+		while (1)
+			if (readl(PCIE1_STATUS) & 0x1)
+				break;
+		writel(readl(PCIE1_LINK_CTRL) & ~0x10, PCIE1_LINK_CTRL);
+	}
+}
+
+/* An extended version of the gated clk. This calls fn() before
+ * disabling the clock. We use this to turn off PHYs etc. */
+struct clk_gate_fn {
+	struct clk_gate gate;
+	void (*fn)(void);
+};
 
+#define to_clk_gate_fn(_gate) container_of(_gate, struct clk_gate_fn, gate)
+#define to_clk_gate(_hw) container_of(_hw, struct clk_gate, hw)
+
+static void clk_gate_fn_disable(struct clk_hw *hw)
+{
+	struct clk_gate *gate = to_clk_gate(hw);
+	struct clk_gate_fn *gate_fn = to_clk_gate_fn(gate);
+
+	if (gate_fn->fn)
+		gate_fn->fn();
+
+	clk_gate_ops.disable(hw);
+}
+
+static struct clk_ops clk_gate_fn_ops;
+
+static struct clk __init *clk_register_gate_fn(struct device *dev,
+		const char *name,
+		const char *parent_name, unsigned long flags,
+		void __iomem *reg, u8 bit_idx,
+		u8 clk_gate_flags, spinlock_t *lock,
+		void (*fn)(void))
+{
+	struct clk_gate_fn *gate_fn;
+	struct clk *clk;
+	struct clk_init_data init;
+
+	gate_fn = kzalloc(sizeof(struct clk_gate_fn), GFP_KERNEL);
+	if (!gate_fn) {
+		pr_err("%s: could not allocate gated clk\n", __func__);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	init.name = name;
+	init.ops = &clk_gate_fn_ops;
+	init.flags = flags;
+	init.parent_names = (parent_name ? &parent_name : NULL);
+	init.num_parents = (parent_name ? 1 : 0);
+
+	/* struct clk_gate assignments */
+	gate_fn->gate.reg = reg;
+	gate_fn->gate.bit_idx = bit_idx;
+	gate_fn->gate.flags = clk_gate_flags;
+	gate_fn->gate.lock = lock;
+	gate_fn->gate.hw.init = &init;
+
+	/* ops is the gate ops, but with our disable function */
+	if (clk_gate_fn_ops.disable != clk_gate_fn_disable) {
+		clk_gate_fn_ops = clk_gate_ops;
+		clk_gate_fn_ops.disable = clk_gate_fn_disable;
+	}
+
+	clk = clk_register(dev, &gate_fn->gate.hw);
+
+	if (IS_ERR(clk))
+		kfree(gate_fn);
+
+	return clk;
+}
+
+static DEFINE_SPINLOCK(gating_lock);
+static struct clk *tclk;
+
+static struct clk __init *kirkwood_register_gate(const char *name, u8 bit_idx)
+{
+	return clk_register_gate(NULL, name, "tclk", 0,
+				 (void __iomem *)CLOCK_GATING_CTRL,
+				 bit_idx, 0, &gating_lock);
+}
+
+static struct clk __init *kirkwood_register_gate_fn(const char *name,
+						    u8 bit_idx,
+						    void (*fn)(void))
+{
+	return clk_register_gate_fn(NULL, name, "tclk", 0,
+				    (void __iomem *)CLOCK_GATING_CTRL,
+				    bit_idx, 0, &gating_lock, fn);
+}
+
+void __init kirkwood_clk_init(void)
+{
+	struct clk *runit, *ge0, *ge1, *sata0, *sata1, *usb0, *sdio;
+	struct clk *crypto, *xor0, *xor1, *pex0, *pex1, *audio;
+
+	tclk = clk_register_fixed_rate(NULL, "tclk", NULL,
+				       CLK_IS_ROOT, kirkwood_tclk);
+
+	runit = kirkwood_register_gate("runit",  CGC_BIT_RUNIT);
+	ge0 = kirkwood_register_gate("ge0",    CGC_BIT_GE0);
+	ge1 = kirkwood_register_gate("ge1",    CGC_BIT_GE1);
+	sata0 = kirkwood_register_gate_fn("sata0",  CGC_BIT_SATA0,
+					  disable_sata0);
+	sata1 = kirkwood_register_gate_fn("sata1",  CGC_BIT_SATA1,
+					  disable_sata1);
+	usb0 = kirkwood_register_gate("usb0",   CGC_BIT_USB0);
+	sdio = kirkwood_register_gate("sdio",   CGC_BIT_SDIO);
+	crypto = kirkwood_register_gate("crypto", CGC_BIT_CRYPTO);
+	xor0 = kirkwood_register_gate("xor0",   CGC_BIT_XOR0);
+	xor1 = kirkwood_register_gate("xor1",   CGC_BIT_XOR1);
+	pex0 = kirkwood_register_gate_fn("pex0",   CGC_BIT_PEX0,
+					 disable_pcie0);
+	pex1 = kirkwood_register_gate_fn("pex1",   CGC_BIT_PEX1,
+					 disable_pcie1);
+	audio = kirkwood_register_gate("audio",  CGC_BIT_AUDIO);
+	kirkwood_register_gate("tdm",    CGC_BIT_TDM);
+	kirkwood_register_gate("tsu",    CGC_BIT_TSU);
+
+	/* clkdev entries, mapping clks to devices */
+	orion_clkdev_add(NULL, "orion_spi.0", runit);
+	orion_clkdev_add(NULL, "orion_spi.1", runit);
+	orion_clkdev_add(NULL, MV643XX_ETH_NAME ".0", ge0);
+	orion_clkdev_add(NULL, MV643XX_ETH_NAME ".1", ge1);
+	orion_clkdev_add(NULL, "orion_wdt", tclk);
+	orion_clkdev_add("0", "sata_mv.0", sata0);
+	orion_clkdev_add("1", "sata_mv.0", sata1);
+	orion_clkdev_add(NULL, "orion-ehci.0", usb0);
+	orion_clkdev_add(NULL, "orion_nand", runit);
+	orion_clkdev_add(NULL, "mvsdio", sdio);
+	orion_clkdev_add(NULL, "mv_crypto", crypto);
+	orion_clkdev_add(NULL, MV_XOR_SHARED_NAME ".0", xor0);
+	orion_clkdev_add(NULL, MV_XOR_SHARED_NAME ".1", xor1);
+	orion_clkdev_add("0", "pcie", pex0);
+	orion_clkdev_add("1", "pcie", pex1);
+	orion_clkdev_add(NULL, "kirkwood-i2s", audio);
+}
 
 /*****************************************************************************
  * EHCI0
  ****************************************************************************/
 void __init kirkwood_ehci_init(void)
 {
-	kirkwood_clk_ctrl |= CGC_USB0;
 	orion_ehci_init(USB_PHYS_BASE, IRQ_KIRKWOOD_USB, EHCI_PHY_NA);
 }
 
@@ -83,11 +254,9 @@ void __init kirkwood_ehci_init(void)
  ****************************************************************************/
 void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data)
 {
-	kirkwood_clk_ctrl |= CGC_GE0;
-
 	orion_ge00_init(eth_data,
 			GE00_PHYS_BASE, IRQ_KIRKWOOD_GE00_SUM,
-			IRQ_KIRKWOOD_GE00_ERR, kirkwood_tclk);
+			IRQ_KIRKWOOD_GE00_ERR);
 }
 
 
@@ -96,12 +265,9 @@ void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data)
  ****************************************************************************/
 void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data)
 {
-
-	kirkwood_clk_ctrl |= CGC_GE1;
-
 	orion_ge01_init(eth_data,
 			GE01_PHYS_BASE, IRQ_KIRKWOOD_GE01_SUM,
-			IRQ_KIRKWOOD_GE01_ERR, kirkwood_tclk);
+			IRQ_KIRKWOOD_GE01_ERR);
 }
 
 
@@ -143,7 +309,6 @@ static struct platform_device kirkwood_nand_flash = {
 void __init kirkwood_nand_init(struct mtd_partition *parts, int nr_parts,
 			       int chip_delay)
 {
-	kirkwood_clk_ctrl |= CGC_RUNIT;
 	kirkwood_nand_data.parts = parts;
 	kirkwood_nand_data.nr_parts = nr_parts;
 	kirkwood_nand_data.chip_delay = chip_delay;
@@ -153,7 +318,6 @@ void __init kirkwood_nand_init(struct mtd_partition *parts, int nr_parts,
 void __init kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts,
 				   int (*dev_ready)(struct mtd_info *))
 {
-	kirkwood_clk_ctrl |= CGC_RUNIT;
 	kirkwood_nand_data.parts = parts;
 	kirkwood_nand_data.nr_parts = nr_parts;
 	kirkwood_nand_data.dev_ready = dev_ready;
@@ -174,10 +338,6 @@ static void __init kirkwood_rtc_init(void)
  ****************************************************************************/
 void __init kirkwood_sata_init(struct mv_sata_platform_data *sata_data)
 {
-	kirkwood_clk_ctrl |= CGC_SATA0;
-	if (sata_data->n_ports > 1)
-		kirkwood_clk_ctrl |= CGC_SATA1;
-
 	orion_sata_init(sata_data, SATA_PHYS_BASE, IRQ_KIRKWOOD_SATA);
 }
 
@@ -220,7 +380,6 @@ void __init kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data)
 		mvsdio_data->clock = 100000000;
 	else
 		mvsdio_data->clock = 200000000;
-	kirkwood_clk_ctrl |= CGC_SDIO;
 	kirkwood_sdio.dev.platform_data = mvsdio_data;
 	platform_device_register(&kirkwood_sdio);
 }
@@ -231,8 +390,7 @@ void __init kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data)
  ****************************************************************************/
 void __init kirkwood_spi_init()
 {
-	kirkwood_clk_ctrl |= CGC_RUNIT;
-	orion_spi_init(SPI_PHYS_BASE, kirkwood_tclk);
+	orion_spi_init(SPI_PHYS_BASE);
 }
 
 
@@ -252,7 +410,7 @@ void __init kirkwood_i2c_init(void)
 void __init kirkwood_uart0_init(void)
 {
 	orion_uart0_init(UART0_VIRT_BASE, UART0_PHYS_BASE,
-			 IRQ_KIRKWOOD_UART_0, kirkwood_tclk);
+			 IRQ_KIRKWOOD_UART_0, tclk);
 }
 
 
@@ -262,7 +420,7 @@ void __init kirkwood_uart0_init(void)
 void __init kirkwood_uart1_init(void)
 {
 	orion_uart1_init(UART1_VIRT_BASE, UART1_PHYS_BASE,
-			 IRQ_KIRKWOOD_UART_1, kirkwood_tclk);
+			 IRQ_KIRKWOOD_UART_1, tclk);
 }
 
 /*****************************************************************************
@@ -270,7 +428,6 @@ void __init kirkwood_uart1_init(void)
  ****************************************************************************/
 void __init kirkwood_crypto_init(void)
 {
-	kirkwood_clk_ctrl |= CGC_CRYPTO;
 	orion_crypto_init(CRYPTO_PHYS_BASE, KIRKWOOD_SRAM_PHYS_BASE,
 			  KIRKWOOD_SRAM_SIZE, IRQ_KIRKWOOD_CRYPTO);
 }
@@ -281,8 +438,6 @@ void __init kirkwood_crypto_init(void)
  ****************************************************************************/
 void __init kirkwood_xor0_init(void)
 {
-	kirkwood_clk_ctrl |= CGC_XOR0;
-
 	orion_xor0_init(XOR0_PHYS_BASE, XOR0_HIGH_PHYS_BASE,
 			IRQ_KIRKWOOD_XOR_00, IRQ_KIRKWOOD_XOR_01);
 }
@@ -293,8 +448,6 @@ void __init kirkwood_xor0_init(void)
  ****************************************************************************/
 void __init kirkwood_xor1_init(void)
 {
-	kirkwood_clk_ctrl |= CGC_XOR1;
-
 	orion_xor1_init(XOR1_PHYS_BASE, XOR1_HIGH_PHYS_BASE,
 			IRQ_KIRKWOOD_XOR_10, IRQ_KIRKWOOD_XOR_11);
 }
@@ -305,7 +458,7 @@ void __init kirkwood_xor1_init(void)
  ****************************************************************************/
 void __init kirkwood_wdt_init(void)
 {
-	orion_wdt_init(kirkwood_tclk);
+	orion_wdt_init();
 }
 
 
@@ -381,7 +534,6 @@ static struct platform_device kirkwood_pcm_device = {
 
 void __init kirkwood_audio_init(void)
 {
-	kirkwood_clk_ctrl |= CGC_AUDIO;
 	platform_device_register(&kirkwood_i2s_device);
 	platform_device_register(&kirkwood_pcm_device);
 }
@@ -465,6 +617,9 @@ void __init kirkwood_init(void)
 	kirkwood_l2_init();
 #endif
 
+	/* Setup root of clk tree */
+	kirkwood_clk_init();
+
 	/* internal devices that every board has */
 	kirkwood_rtc_init();
 	kirkwood_wdt_init();
@@ -477,61 +632,6 @@ void __init kirkwood_init(void)
 #endif
 }
 
-static int __init kirkwood_clock_gate(void)
-{
-	unsigned int curr = readl(CLOCK_GATING_CTRL);
-	u32 dev, rev;
-
-	kirkwood_pcie_id(&dev, &rev);
-	printk(KERN_DEBUG "Gating clock of unused units\n");
-	printk(KERN_DEBUG "before: 0x%08x\n", curr);
-
-	/* Make sure those units are accessible */
-	writel(curr | CGC_SATA0 | CGC_SATA1 | CGC_PEX0 | CGC_PEX1, CLOCK_GATING_CTRL);
-
-	/* For SATA: first shutdown the phy */
-	if (!(kirkwood_clk_ctrl & CGC_SATA0)) {
-		/* Disable PLL and IVREF */
-		writel(readl(SATA0_PHY_MODE_2) & ~0xf, SATA0_PHY_MODE_2);
-		/* Disable PHY */
-		writel(readl(SATA0_IF_CTRL) | 0x200, SATA0_IF_CTRL);
-	}
-	if (!(kirkwood_clk_ctrl & CGC_SATA1)) {
-		/* Disable PLL and IVREF */
-		writel(readl(SATA1_PHY_MODE_2) & ~0xf, SATA1_PHY_MODE_2);
-		/* Disable PHY */
-		writel(readl(SATA1_IF_CTRL) | 0x200, SATA1_IF_CTRL);
-	}
-	
-	/* For PCIe: first shutdown the phy */
-	if (!(kirkwood_clk_ctrl & CGC_PEX0)) {
-		writel(readl(PCIE_LINK_CTRL) | 0x10, PCIE_LINK_CTRL);
-		while (1)
-			if (readl(PCIE_STATUS) & 0x1)
-				break;
-		writel(readl(PCIE_LINK_CTRL) & ~0x10, PCIE_LINK_CTRL);
-	}
-
-	/* For PCIe 1: first shutdown the phy */
-	if (dev == MV88F6282_DEV_ID) {
-		if (!(kirkwood_clk_ctrl & CGC_PEX1)) {
-			writel(readl(PCIE1_LINK_CTRL) | 0x10, PCIE1_LINK_CTRL);
-			while (1)
-				if (readl(PCIE1_STATUS) & 0x1)
-					break;
-			writel(readl(PCIE1_LINK_CTRL) & ~0x10, PCIE1_LINK_CTRL);
-		}
-	} else  /* keep this bit set for devices that don't have PCIe1 */
-		kirkwood_clk_ctrl |= CGC_PEX1;
-
-	/* Now gate clock the required units */
-	writel(kirkwood_clk_ctrl, CLOCK_GATING_CTRL);
-	printk(KERN_DEBUG " after: 0x%08x\n", readl(CLOCK_GATING_CTRL));
-
-	return 0;
-}
-late_initcall(kirkwood_clock_gate);
-
 void kirkwood_restart(char mode, const char *cmd)
 {
 	/*
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index fa8e7689c436..9248fa2c165b 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -50,6 +50,7 @@ void kirkwood_nand_init(struct mtd_partition *parts, int nr_parts, int delay);
 void kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts, int (*dev_ready)(struct mtd_info *));
 void kirkwood_audio_init(void);
 void kirkwood_restart(char, const char *);
+void kirkwood_clk_init(void);
 
 /* board init functions for boards not fully converted to fdt */
 #ifdef CONFIG_MACH_DREAMPLUG_DT
@@ -58,6 +59,24 @@ void dreamplug_init(void);
 static inline void dreamplug_init(void) {};
 #endif
 
+#ifdef CONFIG_MACH_DLINK_KIRKWOOD_DT
+void dnskw_init(void);
+#else
+static inline void dnskw_init(void) {};
+#endif
+
+#ifdef CONFIG_MACH_ICONNECT_DT
+void iconnect_init(void);
+#else
+static inline void iconnect_init(void) {};
+#endif
+
+#ifdef CONFIG_MACH_IB62X0_DT
+void ib62x0_init(void);
+#else
+static inline void ib62x0_init(void) {};
+#endif
+
 /* early init functions not converted to fdt yet */
 char *kirkwood_id(void);
 void kirkwood_l2_init(void);
diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
index 957bd7997d7e..3eee37a3b501 100644
--- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
+++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
@@ -43,6 +43,22 @@
 #define L2_WRITETHROUGH		0x00000010
 
 #define CLOCK_GATING_CTRL	(BRIDGE_VIRT_BASE | 0x11c)
+#define CGC_BIT_GE0		(0)
+#define CGC_BIT_PEX0		(2)
+#define CGC_BIT_USB0		(3)
+#define CGC_BIT_SDIO		(4)
+#define CGC_BIT_TSU		(5)
+#define CGC_BIT_DUNIT		(6)
+#define CGC_BIT_RUNIT		(7)
+#define CGC_BIT_XOR0		(8)
+#define CGC_BIT_AUDIO		(9)
+#define CGC_BIT_SATA0		(14)
+#define CGC_BIT_SATA1		(15)
+#define CGC_BIT_XOR1		(16)
+#define CGC_BIT_CRYPTO		(17)
+#define CGC_BIT_PEX1		(18)
+#define CGC_BIT_GE1		(19)
+#define CGC_BIT_TDM		(20)
 #define CGC_GE0			(1 << 0)
 #define CGC_PEX0		(1 << 2)
 #define CGC_USB0		(1 << 3)
diff --git a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
index 85f6169c2484..6d8364a97810 100644
--- a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
+++ b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
@@ -23,7 +23,6 @@
 #include <linux/gpio_keys.h>
 #include <linux/spi/flash.h>
 #include <linux/spi/spi.h>
-#include <linux/spi/orion_spi.h>
 #include <net/dsa.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c
index f56a0118c1bb..6e8b2efa3c35 100644
--- a/arch/arm/mach-kirkwood/pcie.c
+++ b/arch/arm/mach-kirkwood/pcie.c
@@ -11,6 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/pci.h>
 #include <linux/slab.h>
+#include <linux/clk.h>
 #include <video/vga.h>
 #include <asm/irq.h>
 #include <asm/mach/pci.h>
@@ -19,6 +20,23 @@
 #include <plat/addr-map.h>
 #include "common.h"
 
+static void kirkwood_enable_pcie_clk(const char *port)
+{
+	struct clk *clk;
+
+	clk = clk_get_sys("pcie", port);
+	if (IS_ERR(clk)) {
+		printk(KERN_ERR "PCIE clock %s missing\n", port);
+		return;
+	}
+	clk_prepare_enable(clk);
+	clk_put(clk);
+}
+
+/* This function is called very early in the boot when probing the
+   hardware to determine what we actually are, and what rate tclk is
+   ticking at. Hence calling kirkwood_enable_pcie_clk() is not
+   possible since the clk tree has not been created yet. */
 void kirkwood_enable_pcie(void)
 {
 	u32 curr = readl(CLOCK_GATING_CTRL);
@@ -26,7 +44,7 @@ void kirkwood_enable_pcie(void)
 		writel(curr | CGC_PEX0, CLOCK_GATING_CTRL);
 }
 
-void __init kirkwood_pcie_id(u32 *dev, u32 *rev)
+void kirkwood_pcie_id(u32 *dev, u32 *rev)
 {
 	kirkwood_enable_pcie();
 	*dev = orion_pcie_dev_id((void __iomem *)PCIE_VIRT_BASE);
@@ -44,12 +62,6 @@ struct pcie_port {
 static int pcie_port_map[2];
 static int num_pcie_ports;
 
-static inline struct pcie_port *bus_to_port(struct pci_bus *bus)
-{
-	struct pci_sys_data *sys = bus->sysdata;
-	return sys->private_data;
-}
-
 static int pcie_valid_config(struct pcie_port *pp, int bus, int dev)
 {
 	/*
@@ -79,7 +91,8 @@ static int pcie_valid_config(struct pcie_port *pp, int bus, int dev)
 static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
 			int size, u32 *val)
 {
-	struct pcie_port *pp = bus_to_port(bus);
+	struct pci_sys_data *sys = bus->sysdata;
+	struct pcie_port *pp = sys->private_data;
 	unsigned long flags;
 	int ret;
 
@@ -98,7 +111,8 @@ static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
 static int pcie_wr_conf(struct pci_bus *bus, u32 devfn,
 			int where, int size, u32 val)
 {
-	struct pcie_port *pp = bus_to_port(bus);
+	struct pci_sys_data *sys = bus->sysdata;
+	struct pcie_port *pp = sys->private_data;
 	unsigned long flags;
 	int ret;
 
@@ -163,7 +177,6 @@ static void __init pcie1_ioresources_init(struct pcie_port *pp)
 
 static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
 {
-	extern unsigned int kirkwood_clk_ctrl;
 	struct pcie_port *pp;
 	int index;
 
@@ -182,11 +195,11 @@ static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
 
 	switch (index) {
 	case 0:
-		kirkwood_clk_ctrl |= CGC_PEX0;
+		kirkwood_enable_pcie_clk("0");
 		pcie0_ioresources_init(pp);
 		break;
 	case 1:
-		kirkwood_clk_ctrl |= CGC_PEX1;
+		kirkwood_enable_pcie_clk("1");
 		pcie1_ioresources_init(pp);
 		break;
 	default:
@@ -248,13 +261,13 @@ kirkwood_pcie_scan_bus(int nr, struct pci_sys_data *sys)
 static int __init kirkwood_pcie_map_irq(const struct pci_dev *dev, u8 slot,
 	u8 pin)
 {
-	struct pcie_port *pp = bus_to_port(dev->bus);
+	struct pci_sys_data *sys = dev->sysdata;
+	struct pcie_port *pp = sys->private_data;
 
 	return pp->irq;
 }
 
 static struct hw_pci kirkwood_pci __initdata = {
-	.swizzle	= pci_std_swizzle,
 	.setup		= kirkwood_pcie_setup,
 	.scan		= kirkwood_pcie_scan_bus,
 	.map_irq	= kirkwood_pcie_map_irq,
diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
index fd2c9c8b6831..f742a66a7045 100644
--- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
@@ -16,7 +16,6 @@
 #include <linux/gpio.h>
 #include <linux/spi/flash.h>
 #include <linux/spi/spi.h>
-#include <linux/spi/orion_spi.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
diff --git a/arch/arm/mach-kirkwood/t5325-setup.c b/arch/arm/mach-kirkwood/t5325-setup.c
index f9d2a11b7f96..bad738e44044 100644
--- a/arch/arm/mach-kirkwood/t5325-setup.c
+++ b/arch/arm/mach-kirkwood/t5325-setup.c
@@ -16,7 +16,6 @@
 #include <linux/mtd/physmap.h>
 #include <linux/spi/flash.h>
 #include <linux/spi/spi.h>
-#include <linux/spi/orion_spi.h>
 #include <linux/i2c.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/ata_platform.h>
diff --git a/arch/arm/mach-kirkwood/tsx1x-common.c b/arch/arm/mach-kirkwood/tsx1x-common.c
index 24294b2bc469..8943ede29b44 100644
--- a/arch/arm/mach-kirkwood/tsx1x-common.c
+++ b/arch/arm/mach-kirkwood/tsx1x-common.c
@@ -4,7 +4,6 @@
 #include <linux/mtd/physmap.h>
 #include <linux/spi/flash.h>
 #include <linux/spi/spi.h>
-#include <linux/spi/orion_spi.h>
 #include <linux/serial_reg.h>
 #include <mach/kirkwood.h>
 #include "common.h"
diff --git a/arch/arm/mach-ks8695/pci.c b/arch/arm/mach-ks8695/pci.c
index acc701435817..bb18193b4bac 100644
--- a/arch/arm/mach-ks8695/pci.c
+++ b/arch/arm/mach-ks8695/pci.c
@@ -141,12 +141,6 @@ static struct pci_ops ks8695_pci_ops = {
 	.write	= ks8695_pci_writeconfig,
 };
 
-static struct pci_bus* __init ks8695_pci_scan_bus(int nr, struct pci_sys_data *sys)
-{
-	return pci_scan_root_bus(NULL, sys->busnr, &ks8695_pci_ops, sys,
-				 &sys->resources);
-}
-
 static struct resource pci_mem = {
 	.name	= "PCI Memory space",
 	.start	= KS8695_PCIMEM_PA,
@@ -302,11 +296,10 @@ static void ks8695_show_pciregs(void)
 
 static struct hw_pci ks8695_pci __initdata = {
 	.nr_controllers	= 1,
+	.ops		= &ks8695_pci_ops,
 	.preinit	= ks8695_pci_preinit,
 	.setup		= ks8695_pci_setup,
-	.scan		= ks8695_pci_scan_bus,
 	.postinit	= NULL,
-	.swizzle	= pci_std_swizzle,
 	.map_irq	= NULL,
 };
 
diff --git a/arch/arm/mach-lpc32xx/Kconfig b/arch/arm/mach-lpc32xx/Kconfig
index 75946ac89ee9..e0b3eee83834 100644
--- a/arch/arm/mach-lpc32xx/Kconfig
+++ b/arch/arm/mach-lpc32xx/Kconfig
@@ -29,30 +29,4 @@ config ARCH_LPC32XX_UART6_SELECT
 
 endmenu
 
-menu "LPC32XX chip components"
-
-config ARCH_LPC32XX_IRAM_FOR_NET
-	bool "Use IRAM for network buffers"
-	default y
-	help
-	  Say Y here to use the LPC internal fast IRAM (i.e. 256KB SRAM) as
-	  network buffer.  If the total combined required buffer sizes is
-	  larger than the size of IRAM, then SDRAM will be used instead.
-
-	  This can be enabled safely if the IRAM is not intended for other
-	  uses.
-
-config ARCH_LPC32XX_MII_SUPPORT
-	bool "Check to enable MII support or leave disabled for RMII support"
-	help
-	  Say Y here to enable MII support, or N for RMII support. Regardless of
-	  which support is selected, the ethernet interface driver needs to be
-	  selected in the device driver networking section.
-
-	  The PHY3250 reference board uses RMII, so users of this board should
-	  say N.
-
-endmenu
-
 endif
-
diff --git a/arch/arm/mach-lpc32xx/clock.c b/arch/arm/mach-lpc32xx/clock.c
index 2fc24ca12054..f6a3ffec1f4b 100644
--- a/arch/arm/mach-lpc32xx/clock.c
+++ b/arch/arm/mach-lpc32xx/clock.c
@@ -1095,49 +1095,42 @@ struct clk *clk_get_parent(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_get_parent);
 
-#define _REGISTER_CLOCK(d, n, c) \
-	{ \
-		.dev_id = (d), \
-		.con_id = (n), \
-		.clk = &(c), \
-	},
-
 static struct clk_lookup lookups[] = {
-	_REGISTER_CLOCK(NULL, "osc_32KHz", osc_32KHz)
-	_REGISTER_CLOCK(NULL, "osc_pll397", osc_pll397)
-	_REGISTER_CLOCK(NULL, "osc_main", osc_main)
-	_REGISTER_CLOCK(NULL, "sys_ck", clk_sys)
-	_REGISTER_CLOCK(NULL, "arm_pll_ck", clk_armpll)
-	_REGISTER_CLOCK(NULL, "ck_pll5", clk_usbpll)
-	_REGISTER_CLOCK(NULL, "hclk_ck", clk_hclk)
-	_REGISTER_CLOCK(NULL, "pclk_ck", clk_pclk)
-	_REGISTER_CLOCK(NULL, "timer0_ck", clk_timer0)
-	_REGISTER_CLOCK(NULL, "timer1_ck", clk_timer1)
-	_REGISTER_CLOCK(NULL, "timer2_ck", clk_timer2)
-	_REGISTER_CLOCK(NULL, "timer3_ck", clk_timer3)
-	_REGISTER_CLOCK(NULL, "vfp9_ck", clk_vfp9)
-	_REGISTER_CLOCK(NULL, "clk_dmac", clk_dma)
-	_REGISTER_CLOCK("pnx4008-watchdog", NULL, clk_wdt)
-	_REGISTER_CLOCK(NULL, "uart3_ck", clk_uart3)
-	_REGISTER_CLOCK(NULL, "uart4_ck", clk_uart4)
-	_REGISTER_CLOCK(NULL, "uart5_ck", clk_uart5)
-	_REGISTER_CLOCK(NULL, "uart6_ck", clk_uart6)
-	_REGISTER_CLOCK("pnx-i2c.0", NULL, clk_i2c0)
-	_REGISTER_CLOCK("pnx-i2c.1", NULL, clk_i2c1)
-	_REGISTER_CLOCK("pnx-i2c.2", NULL, clk_i2c2)
-	_REGISTER_CLOCK("dev:ssp0", NULL, clk_ssp0)
-	_REGISTER_CLOCK("dev:ssp1", NULL, clk_ssp1)
-	_REGISTER_CLOCK("lpc32xx_keys.0", NULL, clk_kscan)
-	_REGISTER_CLOCK("lpc32xx-nand.0", "nand_ck", clk_nand)
-	_REGISTER_CLOCK("lpc32xx-adc", NULL, clk_adc)
-	_REGISTER_CLOCK(NULL, "i2s0_ck", clk_i2s0)
-	_REGISTER_CLOCK(NULL, "i2s1_ck", clk_i2s1)
-	_REGISTER_CLOCK("ts-lpc32xx", NULL, clk_tsc)
-	_REGISTER_CLOCK("dev:mmc0", NULL, clk_mmc)
-	_REGISTER_CLOCK("lpc-eth.0", NULL, clk_net)
-	_REGISTER_CLOCK("dev:clcd", NULL, clk_lcd)
-	_REGISTER_CLOCK("lpc32xx_udc", "ck_usbd", clk_usbd)
-	_REGISTER_CLOCK("lpc32xx_rtc", NULL, clk_rtc)
+	CLKDEV_INIT(NULL, "osc_32KHz", &osc_32KHz),
+	CLKDEV_INIT(NULL, "osc_pll397", &osc_pll397),
+	CLKDEV_INIT(NULL, "osc_main", &osc_main),
+	CLKDEV_INIT(NULL, "sys_ck", &clk_sys),
+	CLKDEV_INIT(NULL, "arm_pll_ck", &clk_armpll),
+	CLKDEV_INIT(NULL, "ck_pll5", &clk_usbpll),
+	CLKDEV_INIT(NULL, "hclk_ck", &clk_hclk),
+	CLKDEV_INIT(NULL, "pclk_ck", &clk_pclk),
+	CLKDEV_INIT(NULL, "timer0_ck", &clk_timer0),
+	CLKDEV_INIT(NULL, "timer1_ck", &clk_timer1),
+	CLKDEV_INIT(NULL, "timer2_ck", &clk_timer2),
+	CLKDEV_INIT(NULL, "timer3_ck", &clk_timer3),
+	CLKDEV_INIT(NULL, "vfp9_ck", &clk_vfp9),
+	CLKDEV_INIT("pl08xdmac", NULL, &clk_dma),
+	CLKDEV_INIT("4003c000.watchdog", NULL, &clk_wdt),
+	CLKDEV_INIT(NULL, "uart3_ck", &clk_uart3),
+	CLKDEV_INIT(NULL, "uart4_ck", &clk_uart4),
+	CLKDEV_INIT(NULL, "uart5_ck", &clk_uart5),
+	CLKDEV_INIT(NULL, "uart6_ck", &clk_uart6),
+	CLKDEV_INIT("400a0000.i2c", NULL, &clk_i2c0),
+	CLKDEV_INIT("400a8000.i2c", NULL, &clk_i2c1),
+	CLKDEV_INIT("31020300.i2c", NULL, &clk_i2c2),
+	CLKDEV_INIT("dev:ssp0", NULL, &clk_ssp0),
+	CLKDEV_INIT("dev:ssp1", NULL, &clk_ssp1),
+	CLKDEV_INIT("lpc32xx_keys.0", NULL, &clk_kscan),
+	CLKDEV_INIT("lpc32xx-nand.0", "nand_ck", &clk_nand),
+	CLKDEV_INIT("40048000.adc", NULL, &clk_adc),
+	CLKDEV_INIT(NULL, "i2s0_ck", &clk_i2s0),
+	CLKDEV_INIT(NULL, "i2s1_ck", &clk_i2s1),
+	CLKDEV_INIT("40048000.tsc", NULL, &clk_tsc),
+	CLKDEV_INIT("20098000.sd", NULL, &clk_mmc),
+	CLKDEV_INIT("31060000.ethernet", NULL, &clk_net),
+	CLKDEV_INIT("dev:clcd", NULL, &clk_lcd),
+	CLKDEV_INIT("31020000.usbd", "ck_usbd", &clk_usbd),
+	CLKDEV_INIT("lpc32xx_rtc", NULL, &clk_rtc),
 };
 
 static int __init clk_init(void)
diff --git a/arch/arm/mach-lpc32xx/common.c b/arch/arm/mach-lpc32xx/common.c
index bbbf063a74c2..5c96057b6d78 100644
--- a/arch/arm/mach-lpc32xx/common.c
+++ b/arch/arm/mach-lpc32xx/common.c
@@ -27,186 +27,11 @@
 
 #include <asm/mach/map.h>
 
-#include <mach/i2c.h>
 #include <mach/hardware.h>
 #include <mach/platform.h>
 #include "common.h"
 
 /*
- * Watchdog timer
- */
-static struct resource watchdog_resources[] = {
-	[0] = {
-		.start = LPC32XX_WDTIM_BASE,
-		.end = LPC32XX_WDTIM_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-struct platform_device lpc32xx_watchdog_device = {
-	.name = "pnx4008-watchdog",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(watchdog_resources),
-	.resource = watchdog_resources,
-};
-
-/*
- * I2C busses
- */
-static struct i2c_pnx_data i2c0_data = {
-	.name = I2C_CHIP_NAME "1",
-	.base = LPC32XX_I2C1_BASE,
-	.irq = IRQ_LPC32XX_I2C_1,
-};
-
-static struct i2c_pnx_data i2c1_data = {
-	.name = I2C_CHIP_NAME "2",
-	.base = LPC32XX_I2C2_BASE,
-	.irq = IRQ_LPC32XX_I2C_2,
-};
-
-static struct i2c_pnx_data i2c2_data = {
-	.name = "USB-I2C",
-	.base = LPC32XX_OTG_I2C_BASE,
-	.irq = IRQ_LPC32XX_USB_I2C,
-};
-
-struct platform_device lpc32xx_i2c0_device = {
-	.name = "pnx-i2c",
-	.id = 0,
-	.dev = {
-		.platform_data = &i2c0_data,
-	},
-};
-
-struct platform_device lpc32xx_i2c1_device = {
-	.name = "pnx-i2c",
-	.id = 1,
-	.dev = {
-		.platform_data = &i2c1_data,
-	},
-};
-
-struct platform_device lpc32xx_i2c2_device = {
-	.name = "pnx-i2c",
-	.id = 2,
-	.dev = {
-		.platform_data = &i2c2_data,
-	},
-};
-
-/* TSC (Touch Screen Controller) */
-
-static struct resource lpc32xx_tsc_resources[] = {
-	{
-		.start = LPC32XX_ADC_BASE,
-		.end = LPC32XX_ADC_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = IRQ_LPC32XX_TS_IRQ,
-		.end = IRQ_LPC32XX_TS_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device lpc32xx_tsc_device = {
-	.name =  "ts-lpc32xx",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(lpc32xx_tsc_resources),
-	.resource = lpc32xx_tsc_resources,
-};
-
-/* RTC */
-
-static struct resource lpc32xx_rtc_resources[] = {
-	{
-		.start = LPC32XX_RTC_BASE,
-		.end = LPC32XX_RTC_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},{
-		.start = IRQ_LPC32XX_RTC,
-		.end = IRQ_LPC32XX_RTC,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device lpc32xx_rtc_device = {
-	.name =  "rtc-lpc32xx",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(lpc32xx_rtc_resources),
-	.resource = lpc32xx_rtc_resources,
-};
-
-/*
- * ADC support
- */
-static struct resource adc_resources[] = {
-	{
-		.start = LPC32XX_ADC_BASE,
-		.end = LPC32XX_ADC_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = IRQ_LPC32XX_TS_IRQ,
-		.end = IRQ_LPC32XX_TS_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device lpc32xx_adc_device = {
-	.name =  "lpc32xx-adc",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(adc_resources),
-	.resource = adc_resources,
-};
-
-/*
- * USB support
- */
-/* The dmamask must be set for OHCI to work */
-static u64 ohci_dmamask = ~(u32) 0;
-static struct resource ohci_resources[] = {
-	{
-		.start = IO_ADDRESS(LPC32XX_USB_BASE),
-		.end = IO_ADDRESS(LPC32XX_USB_BASE + 0x100 - 1),
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = IRQ_LPC32XX_USB_HOST,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-struct platform_device lpc32xx_ohci_device = {
-	.name = "usb-ohci",
-	.id = -1,
-	.dev = {
-		.dma_mask = &ohci_dmamask,
-		.coherent_dma_mask = 0xFFFFFFFF,
-	},
-	.num_resources = ARRAY_SIZE(ohci_resources),
-	.resource = ohci_resources,
-};
-
-/*
- * Network Support
- */
-static struct resource net_resources[] = {
-	[0] = DEFINE_RES_MEM(LPC32XX_ETHERNET_BASE, SZ_4K),
-	[1] = DEFINE_RES_MEM(LPC32XX_IRAM_BASE, SZ_128K),
-	[2] = DEFINE_RES_IRQ(IRQ_LPC32XX_ETHERNET),
-};
-
-static u64 lpc32xx_mac_dma_mask = 0xffffffffUL;
-struct platform_device lpc32xx_net_device = {
-	.name = "lpc-eth",
-	.id = 0,
-	.dev = {
-		.dma_mask = &lpc32xx_mac_dma_mask,
-		.coherent_dma_mask = 0xffffffffUL,
-	},
-	.num_resources = ARRAY_SIZE(net_resources),
-	.resource = net_resources,
-};
-
-/*
  * Returns the unique ID for the device
  */
 void lpc32xx_get_uid(u32 devid[4])
@@ -398,3 +223,16 @@ void lpc23xx_restart(char mode, const char *cmd)
 	while (1)
 		;
 }
+
+static int __init lpc32xx_display_uid(void)
+{
+	u32 uid[4];
+
+	lpc32xx_get_uid(uid);
+
+	printk(KERN_INFO "LPC32XX unique ID: %08x%08x%08x%08x\n",
+		uid[3], uid[2], uid[1], uid[0]);
+
+	return 1;
+}
+arch_initcall(lpc32xx_display_uid);
diff --git a/arch/arm/mach-lpc32xx/common.h b/arch/arm/mach-lpc32xx/common.h
index 68e45e8c9486..afeac3b1fae6 100644
--- a/arch/arm/mach-lpc32xx/common.h
+++ b/arch/arm/mach-lpc32xx/common.h
@@ -23,26 +23,12 @@
 #include <linux/platform_device.h>
 
 /*
- * Arch specific platform device structures
- */
-extern struct platform_device lpc32xx_watchdog_device;
-extern struct platform_device lpc32xx_i2c0_device;
-extern struct platform_device lpc32xx_i2c1_device;
-extern struct platform_device lpc32xx_i2c2_device;
-extern struct platform_device lpc32xx_tsc_device;
-extern struct platform_device lpc32xx_adc_device;
-extern struct platform_device lpc32xx_rtc_device;
-extern struct platform_device lpc32xx_ohci_device;
-extern struct platform_device lpc32xx_net_device;
-
-/*
  * Other arch specific structures and functions
  */
 extern struct sys_timer lpc32xx_timer;
 extern void __init lpc32xx_init_irq(void);
 extern void __init lpc32xx_map_io(void);
 extern void __init lpc32xx_serial_init(void);
-extern void __init lpc32xx_gpio_init(void);
 extern void lpc23xx_restart(char, const char *);
 
 
diff --git a/arch/arm/mach-lpc32xx/include/mach/gpio.h b/arch/arm/mach-lpc32xx/include/mach/gpio.h
index 40a8c178f10d..2ba6ca412bef 100644
--- a/arch/arm/mach-lpc32xx/include/mach/gpio.h
+++ b/arch/arm/mach-lpc32xx/include/mach/gpio.h
@@ -1 +1,8 @@
-/* empty */
+#ifndef __MACH_GPIO_H
+#define __MACH_GPIO_H
+
+#include "gpio-lpc32xx.h"
+
+#define ARCH_NR_GPIOS (LPC32XX_GPO_P3_GRP + LPC32XX_GPO_P3_MAX)
+
+#endif /* __MACH_GPIO_H */
diff --git a/arch/arm/mach-lpc32xx/include/mach/i2c.h b/arch/arm/mach-lpc32xx/include/mach/i2c.h
deleted file mode 100644
index 034dc9286bcc..000000000000
--- a/arch/arm/mach-lpc32xx/include/mach/i2c.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * PNX4008-specific tweaks for I2C IP3204 block
- *
- * Author: Vitaly Wool <vwool@ru.mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __ASM_ARCH_I2C_H
-#define __ASM_ARCH_I2C_H
-
-enum {
-	mstatus_tdi = 0x00000001,
-	mstatus_afi = 0x00000002,
-	mstatus_nai = 0x00000004,
-	mstatus_drmi = 0x00000008,
-	mstatus_active = 0x00000020,
-	mstatus_scl = 0x00000040,
-	mstatus_sda = 0x00000080,
-	mstatus_rff = 0x00000100,
-	mstatus_rfe = 0x00000200,
-	mstatus_tff = 0x00000400,
-	mstatus_tfe = 0x00000800,
-};
-
-enum {
-	mcntrl_tdie = 0x00000001,
-	mcntrl_afie = 0x00000002,
-	mcntrl_naie = 0x00000004,
-	mcntrl_drmie = 0x00000008,
-	mcntrl_daie = 0x00000020,
-	mcntrl_rffie = 0x00000040,
-	mcntrl_tffie = 0x00000080,
-	mcntrl_reset = 0x00000100,
-	mcntrl_cdbmode = 0x00000400,
-};
-
-enum {
-	rw_bit = 1 << 0,
-	start_bit = 1 << 8,
-	stop_bit = 1 << 9,
-};
-
-#define I2C_REG_RX(a)	((a)->ioaddr)		/* Rx FIFO reg (RO) */
-#define I2C_REG_TX(a)	((a)->ioaddr)		/* Tx FIFO reg (WO) */
-#define I2C_REG_STS(a)	((a)->ioaddr + 0x04)	/* Status reg (RO) */
-#define I2C_REG_CTL(a)	((a)->ioaddr + 0x08)	/* Ctl reg */
-#define I2C_REG_CKL(a)	((a)->ioaddr + 0x0c)	/* Clock divider low */
-#define I2C_REG_CKH(a)	((a)->ioaddr + 0x10)	/* Clock divider high */
-#define I2C_REG_ADR(a)	((a)->ioaddr + 0x14)	/* I2C address */
-#define I2C_REG_RFL(a)	((a)->ioaddr + 0x18)	/* Rx FIFO level (RO) */
-#define I2C_REG_TFL(a)	((a)->ioaddr + 0x1c)	/* Tx FIFO level (RO) */
-#define I2C_REG_RXB(a)	((a)->ioaddr + 0x20)	/* Num of bytes Rx-ed (RO) */
-#define I2C_REG_TXB(a)	((a)->ioaddr + 0x24)	/* Num of bytes Tx-ed (RO) */
-#define I2C_REG_TXS(a)	((a)->ioaddr + 0x28)	/* Tx slave FIFO (RO) */
-#define I2C_REG_STFL(a)	((a)->ioaddr + 0x2c)	/* Tx slave FIFO level (RO) */
-
-#define I2C_CHIP_NAME		"PNX4008-I2C"
-
-#endif				/* __ASM_ARCH_I2C_H */
diff --git a/arch/arm/mach-lpc32xx/irq.c b/arch/arm/mach-lpc32xx/irq.c
index d080cb1123dd..5b1cc35e6fba 100644
--- a/arch/arm/mach-lpc32xx/irq.c
+++ b/arch/arm/mach-lpc32xx/irq.c
@@ -22,6 +22,11 @@
 #include <linux/irq.h>
 #include <linux/err.h>
 #include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/irqdomain.h>
+#include <linux/module.h>
 
 #include <mach/irqs.h>
 #include <mach/hardware.h>
@@ -44,6 +49,9 @@
 #define SIC1_ATR_DEFAULT	0x00026000
 #define SIC2_ATR_DEFAULT	0x00000000
 
+static struct irq_domain *lpc32xx_mic_domain;
+static struct device_node *lpc32xx_mic_np;
+
 struct lpc32xx_event_group_regs {
 	void __iomem *enab_reg;
 	void __iomem *edge_reg;
@@ -203,7 +211,7 @@ static void lpc32xx_mask_irq(struct irq_data *d)
 {
 	unsigned int reg, ctrl, mask;
 
-	get_controller(d->irq, &ctrl, &mask);
+	get_controller(d->hwirq, &ctrl, &mask);
 
 	reg = __raw_readl(LPC32XX_INTC_MASK(ctrl)) & ~mask;
 	__raw_writel(reg, LPC32XX_INTC_MASK(ctrl));
@@ -213,7 +221,7 @@ static void lpc32xx_unmask_irq(struct irq_data *d)
 {
 	unsigned int reg, ctrl, mask;
 
-	get_controller(d->irq, &ctrl, &mask);
+	get_controller(d->hwirq, &ctrl, &mask);
 
 	reg = __raw_readl(LPC32XX_INTC_MASK(ctrl)) | mask;
 	__raw_writel(reg, LPC32XX_INTC_MASK(ctrl));
@@ -223,14 +231,14 @@ static void lpc32xx_ack_irq(struct irq_data *d)
 {
 	unsigned int ctrl, mask;
 
-	get_controller(d->irq, &ctrl, &mask);
+	get_controller(d->hwirq, &ctrl, &mask);
 
 	__raw_writel(mask, LPC32XX_INTC_RAW_STAT(ctrl));
 
 	/* Also need to clear pending wake event */
-	if (lpc32xx_events[d->irq].mask != 0)
-		__raw_writel(lpc32xx_events[d->irq].mask,
-			lpc32xx_events[d->irq].event_group->rawstat_reg);
+	if (lpc32xx_events[d->hwirq].mask != 0)
+		__raw_writel(lpc32xx_events[d->hwirq].mask,
+			lpc32xx_events[d->hwirq].event_group->rawstat_reg);
 }
 
 static void __lpc32xx_set_irq_type(unsigned int irq, int use_high_level,
@@ -274,22 +282,22 @@ static int lpc32xx_set_irq_type(struct irq_data *d, unsigned int type)
 	switch (type) {
 	case IRQ_TYPE_EDGE_RISING:
 		/* Rising edge sensitive */
-		__lpc32xx_set_irq_type(d->irq, 1, 1);
+		__lpc32xx_set_irq_type(d->hwirq, 1, 1);
 		break;
 
 	case IRQ_TYPE_EDGE_FALLING:
 		/* Falling edge sensitive */
-		__lpc32xx_set_irq_type(d->irq, 0, 1);
+		__lpc32xx_set_irq_type(d->hwirq, 0, 1);
 		break;
 
 	case IRQ_TYPE_LEVEL_LOW:
 		/* Low level sensitive */
-		__lpc32xx_set_irq_type(d->irq, 0, 0);
+		__lpc32xx_set_irq_type(d->hwirq, 0, 0);
 		break;
 
 	case IRQ_TYPE_LEVEL_HIGH:
 		/* High level sensitive */
-		__lpc32xx_set_irq_type(d->irq, 1, 0);
+		__lpc32xx_set_irq_type(d->hwirq, 1, 0);
 		break;
 
 	/* Other modes are not supported */
@@ -298,7 +306,7 @@ static int lpc32xx_set_irq_type(struct irq_data *d, unsigned int type)
 	}
 
 	/* Ok to use the level handler for all types */
-	irq_set_handler(d->irq, handle_level_irq);
+	irq_set_handler(d->hwirq, handle_level_irq);
 
 	return 0;
 }
@@ -307,33 +315,33 @@ static int lpc32xx_irq_wake(struct irq_data *d, unsigned int state)
 {
 	unsigned long eventreg;
 
-	if (lpc32xx_events[d->irq].mask != 0) {
-		eventreg = __raw_readl(lpc32xx_events[d->irq].
+	if (lpc32xx_events[d->hwirq].mask != 0) {
+		eventreg = __raw_readl(lpc32xx_events[d->hwirq].
 			event_group->enab_reg);
 
 		if (state)
-			eventreg |= lpc32xx_events[d->irq].mask;
+			eventreg |= lpc32xx_events[d->hwirq].mask;
 		else {
-			eventreg &= ~lpc32xx_events[d->irq].mask;
+			eventreg &= ~lpc32xx_events[d->hwirq].mask;
 
 			/*
 			 * When disabling the wakeup, clear the latched
 			 * event
 			 */
-			__raw_writel(lpc32xx_events[d->irq].mask,
-				lpc32xx_events[d->irq].
+			__raw_writel(lpc32xx_events[d->hwirq].mask,
+				lpc32xx_events[d->hwirq].
 				event_group->rawstat_reg);
 		}
 
 		__raw_writel(eventreg,
-			lpc32xx_events[d->irq].event_group->enab_reg);
+			lpc32xx_events[d->hwirq].event_group->enab_reg);
 
 		return 0;
 	}
 
 	/* Clear event */
-	__raw_writel(lpc32xx_events[d->irq].mask,
-		lpc32xx_events[d->irq].event_group->rawstat_reg);
+	__raw_writel(lpc32xx_events[d->hwirq].mask,
+		lpc32xx_events[d->hwirq].event_group->rawstat_reg);
 
 	return -ENODEV;
 }
@@ -353,6 +361,7 @@ static void __init lpc32xx_set_default_mappings(unsigned int apr,
 }
 
 static struct irq_chip lpc32xx_irq_chip = {
+	.name = "MIC",
 	.irq_ack = lpc32xx_ack_irq,
 	.irq_mask = lpc32xx_mask_irq,
 	.irq_unmask = lpc32xx_unmask_irq,
@@ -386,9 +395,23 @@ static void lpc32xx_sic2_handler(unsigned int irq, struct irq_desc *desc)
 	}
 }
 
+static int __init __lpc32xx_mic_of_init(struct device_node *node,
+					struct device_node *parent)
+{
+	lpc32xx_mic_np = node;
+
+	return 0;
+}
+
+static const struct of_device_id mic_of_match[] __initconst = {
+	{ .compatible = "nxp,lpc3220-mic", .data = __lpc32xx_mic_of_init },
+	{ }
+};
+
 void __init lpc32xx_init_irq(void)
 {
 	unsigned int i;
+	int irq_base;
 
 	/* Setup MIC */
 	__raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_MIC_BASE));
@@ -448,4 +471,19 @@ void __init lpc32xx_init_irq(void)
 		LPC32XX_CLKPWR_PIN_RS);
 	__raw_writel(__raw_readl(LPC32XX_CLKPWR_INT_RS),
 		LPC32XX_CLKPWR_INT_RS);
+
+	of_irq_init(mic_of_match);
+
+	irq_base = irq_alloc_descs(-1, 0, NR_IRQS, 0);
+	if (irq_base < 0) {
+		pr_warn("Cannot allocate irq_descs, assuming pre-allocated\n");
+		irq_base = 0;
+	}
+
+	lpc32xx_mic_domain = irq_domain_add_legacy(lpc32xx_mic_np, NR_IRQS,
+						   irq_base, 0,
+						   &irq_domain_simple_ops,
+						   NULL);
+	if (!lpc32xx_mic_domain)
+		panic("Unable to add MIC irq domain\n");
 }
diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c
index 7f7401ec7487..540106cdb9ec 100644
--- a/arch/arm/mach-lpc32xx/phy3250.c
+++ b/arch/arm/mach-lpc32xx/phy3250.c
@@ -1,8 +1,9 @@
 /*
- * arch/arm/mach-lpc32xx/phy3250.c
+ * Platform support for LPC32xx SoC
  *
  * Author: Kevin Wells <kevin.wells@nxp.com>
  *
+ * Copyright (C) 2012 Roland Stigge <stigge@antcom.de>
  * Copyright (C) 2010 NXP Semiconductors
  *
  * This program is free software; you can redistribute it and/or modify
@@ -25,11 +26,16 @@
 #include <linux/device.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/eeprom.h>
-#include <linux/leds.h>
 #include <linux/gpio.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
 #include <linux/amba/pl022.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/clk.h>
+#include <linux/amba/pl08x.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -47,7 +53,6 @@
 #define SPI0_CS_GPIO	LPC32XX_GPIO(LPC32XX_GPIO_P3_GRP, 5)
 #define LCD_POWER_GPIO	LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 0)
 #define BKL_POWER_GPIO	LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 4)
-#define LED_GPIO	LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 1)
 
 /*
  * AMBA LCD controller
@@ -150,9 +155,6 @@ static struct clcd_board lpc32xx_clcd_data = {
 	.remove		= lpc32xx_clcd_remove,
 };
 
-static AMBA_AHB_DEVICE(lpc32xx_clcd, "dev:clcd", 0,
-	LPC32XX_LCD_BASE, { IRQ_LPC32XX_LCD }, &lpc32xx_clcd_data);
-
 /*
  * AMBA SSP (SPI)
  */
@@ -180,8 +182,11 @@ static struct pl022_ssp_controller lpc32xx_ssp0_data = {
 	.enable_dma		= 0,
 };
 
-static AMBA_APB_DEVICE(lpc32xx_ssp0, "dev:ssp0", 0,
-	LPC32XX_SSP0_BASE, { IRQ_LPC32XX_SSP0 }, &lpc32xx_ssp0_data);
+static struct pl022_ssp_controller lpc32xx_ssp1_data = {
+	.bus_id			= 1,
+	.num_chipselect		= 1,
+	.enable_dma		= 0,
+};
 
 /* AT25 driver registration */
 static int __init phy3250_spi_board_register(void)
@@ -221,73 +226,20 @@ static int __init phy3250_spi_board_register(void)
 }
 arch_initcall(phy3250_spi_board_register);
 
-static struct i2c_board_info __initdata phy3250_i2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("pcf8563", 0x51),
-	},
-};
-
-static struct gpio_led phy_leds[] = {
-	{
-		.name			= "led0",
-		.gpio			= LED_GPIO,
-		.active_low		= 1,
-		.default_trigger	= "heartbeat",
-	},
-};
-
-static struct gpio_led_platform_data led_data = {
-	.leds = phy_leds,
-	.num_leds = ARRAY_SIZE(phy_leds),
-};
-
-static struct platform_device lpc32xx_gpio_led_device = {
-	.name			= "leds-gpio",
-	.id			= -1,
-	.dev.platform_data	= &led_data,
+static struct pl08x_platform_data pl08x_pd = {
 };
 
-static struct platform_device *phy3250_devs[] __initdata = {
-	&lpc32xx_rtc_device,
-	&lpc32xx_tsc_device,
-	&lpc32xx_i2c0_device,
-	&lpc32xx_i2c1_device,
-	&lpc32xx_i2c2_device,
-	&lpc32xx_watchdog_device,
-	&lpc32xx_gpio_led_device,
-	&lpc32xx_adc_device,
-	&lpc32xx_ohci_device,
-	&lpc32xx_net_device,
+static const struct of_dev_auxdata lpc32xx_auxdata_lookup[] __initconst = {
+	OF_DEV_AUXDATA("arm,pl022", 0x20084000, "dev:ssp0", &lpc32xx_ssp0_data),
+	OF_DEV_AUXDATA("arm,pl022", 0x2008C000, "dev:ssp1", &lpc32xx_ssp1_data),
+	OF_DEV_AUXDATA("arm,pl110", 0x31040000, "dev:clcd", &lpc32xx_clcd_data),
+	OF_DEV_AUXDATA("arm,pl080", 0x31000000, "pl08xdmac", &pl08x_pd),
+	{ }
 };
 
-static struct amba_device *amba_devs[] __initdata = {
-	&lpc32xx_clcd_device,
-	&lpc32xx_ssp0_device,
-};
-
-/*
- * Board specific functions
- */
-static void __init phy3250_board_init(void)
+static void __init lpc3250_machine_init(void)
 {
 	u32 tmp;
-	int i;
-
-	lpc32xx_gpio_init();
-
-	/* Register GPIOs used on this board */
-	if (gpio_request(SPI0_CS_GPIO, "spi0 cs"))
-		printk(KERN_ERR "Error requesting gpio %u",
-			SPI0_CS_GPIO);
-	else if (gpio_direction_output(SPI0_CS_GPIO, 1))
-		printk(KERN_ERR "Error setting gpio %u to output",
-			SPI0_CS_GPIO);
-
-	/* Setup network interface for RMII mode */
-	tmp = __raw_readl(LPC32XX_CLKPWR_MACCLK_CTRL);
-	tmp &= ~LPC32XX_CLKPWR_MACCTRL_PINS_MSK;
-	tmp |= LPC32XX_CLKPWR_MACCTRL_USE_RMII_PINS;
-	__raw_writel(tmp, LPC32XX_CLKPWR_MACCLK_CTRL);
 
 	/* Setup SLC NAND controller muxing */
 	__raw_writel(LPC32XX_CLKPWR_NANDCLK_SEL_SLC,
@@ -300,6 +252,12 @@ static void __init phy3250_board_init(void)
 	tmp |= LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_TFT16;
 	__raw_writel(tmp, LPC32XX_CLKPWR_LCDCLK_CTRL);
 
+	/* Set up USB power */
+	tmp = __raw_readl(LPC32XX_CLKPWR_USB_CTRL);
+	tmp |= LPC32XX_CLKPWR_USBCTRL_HCLK_EN |
+		LPC32XX_CLKPWR_USBCTRL_USBI2C_EN;
+	__raw_writel(tmp, LPC32XX_CLKPWR_USB_CTRL);
+
 	/* Set up I2C pull levels */
 	tmp = __raw_readl(LPC32XX_CLKPWR_I2C_CLK_CTRL);
 	tmp |= LPC32XX_CLKPWR_I2CCLK_USBI2CHI_DRIVE |
@@ -321,54 +279,51 @@ static void __init phy3250_board_init(void)
 	/*
 	 * AMBA peripheral clocks need to be enabled prior to AMBA device
 	 * detection or a data fault will occur, so enable the clocks
-	 * here. However, we don't want to enable them if the peripheral
-	 * isn't included in the image
+	 * here.
 	 */
-#ifdef CONFIG_FB_ARMCLCD
 	tmp = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL);
 	__raw_writel((tmp | LPC32XX_CLKPWR_LCDCTRL_CLK_EN),
 		LPC32XX_CLKPWR_LCDCLK_CTRL);
-#endif
-#ifdef CONFIG_SPI_PL022
+
 	tmp = __raw_readl(LPC32XX_CLKPWR_SSP_CLK_CTRL);
 	__raw_writel((tmp | LPC32XX_CLKPWR_SSPCTRL_SSPCLK0_EN),
 		LPC32XX_CLKPWR_SSP_CLK_CTRL);
-#endif
 
-	platform_add_devices(phy3250_devs, ARRAY_SIZE(phy3250_devs));
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
-		struct amba_device *d = amba_devs[i];
-		amba_device_register(d, &iomem_resource);
-	}
+	tmp = __raw_readl(LPC32XX_CLKPWR_DMA_CLK_CTRL);
+	__raw_writel((tmp | LPC32XX_CLKPWR_DMACLKCTRL_CLK_EN),
+		     LPC32XX_CLKPWR_DMA_CLK_CTRL);
 
 	/* Test clock needed for UDA1380 initial init */
 	__raw_writel(LPC32XX_CLKPWR_TESTCLK2_SEL_MOSC |
 		LPC32XX_CLKPWR_TESTCLK_TESTCLK2_EN,
 		LPC32XX_CLKPWR_TEST_CLK_SEL);
 
-	i2c_register_board_info(0, phy3250_i2c_board_info,
-		ARRAY_SIZE(phy3250_i2c_board_info));
-}
-
-static int __init lpc32xx_display_uid(void)
-{
-	u32 uid[4];
-
-	lpc32xx_get_uid(uid);
-
-	printk(KERN_INFO "LPC32XX unique ID: %08x%08x%08x%08x\n",
-		uid[3], uid[2], uid[1], uid[0]);
+	of_platform_populate(NULL, of_default_bus_match_table,
+			     lpc32xx_auxdata_lookup, NULL);
 
-	return 1;
+	/* Register GPIOs used on this board */
+	if (gpio_request(SPI0_CS_GPIO, "spi0 cs"))
+		printk(KERN_ERR "Error requesting gpio %u",
+			SPI0_CS_GPIO);
+	else if (gpio_direction_output(SPI0_CS_GPIO, 1))
+		printk(KERN_ERR "Error setting gpio %u to output",
+			SPI0_CS_GPIO);
 }
-arch_initcall(lpc32xx_display_uid);
 
-MACHINE_START(PHY3250, "Phytec 3250 board with the LPC3250 Microcontroller")
-	/* Maintainer: Kevin Wells, NXP Semiconductors */
+static char const *lpc32xx_dt_compat[] __initdata = {
+	"nxp,lpc3220",
+	"nxp,lpc3230",
+	"nxp,lpc3240",
+	"nxp,lpc3250",
+	NULL
+};
+
+DT_MACHINE_START(LPC32XX_DT, "LPC32XX SoC (Flattened Device Tree)")
 	.atag_offset	= 0x100,
 	.map_io		= lpc32xx_map_io,
 	.init_irq	= lpc32xx_init_irq,
 	.timer		= &lpc32xx_timer,
-	.init_machine	= phy3250_board_init,
+	.init_machine	= lpc3250_machine_init,
+	.dt_compat	= lpc32xx_dt_compat,
 	.restart	= lpc23xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig
index 5a90b9a3ab6e..7fddd01b85b9 100644
--- a/arch/arm/mach-mmp/Kconfig
+++ b/arch/arm/mach-mmp/Kconfig
@@ -2,16 +2,6 @@ if ARCH_MMP
 
 menu "Marvell PXA168/910/MMP2 Implmentations"
 
-config MACH_MMP_DT
-	bool "Support MMP2 platforms from device tree"
-	select CPU_PXA168
-	select CPU_PXA910
-	select USE_OF
-	help
-	  Include support for Marvell MMP2 based platforms using
-	  the device tree. Needn't select any other machine while
-	  MACH_MMP_DT is enabled.
-
 config MACH_ASPENITE
 	bool "Marvell's PXA168 Aspenite Development Board"
 	select CPU_PXA168
@@ -94,6 +84,25 @@ config MACH_GPLUGD
 	  Say 'Y' here if you want to support the Marvell PXA168-based
 	  GuruPlug Display (gplugD) Board
 
+config MACH_MMP_DT
+	bool "Support MMP (ARMv5) platforms from device tree"
+	select CPU_PXA168
+	select CPU_PXA910
+	select USE_OF
+	help
+	  Include support for Marvell MMP2 based platforms using
+	  the device tree. Needn't select any other machine while
+	  MACH_MMP_DT is enabled.
+
+config MACH_MMP2_DT
+	bool "Support MMP2 (ARMv7) platforms from device tree"
+	depends on !CPU_MOHAWK
+	select CPU_MMP2
+	select USE_OF
+	help
+	  Include support for Marvell MMP2 based platforms using
+	  the device tree.
+
 endmenu
 
 config CPU_PXA168
@@ -113,4 +122,11 @@ config CPU_MMP2
 	select CPU_PJ4
 	help
 	  Select code specific to MMP2. MMP2 is ARMv7 compatible.
+
+config USB_EHCI_MV_U2O
+        bool "EHCI support for PXA USB OTG controller"
+	depends on USB_EHCI_MV
+	help
+	  Enables support for OTG controller which can be switched to host mode.
+
 endif
diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile
index 4fc0ff5dc96d..b786f7e6cd1f 100644
--- a/arch/arm/mach-mmp/Makefile
+++ b/arch/arm/mach-mmp/Makefile
@@ -2,12 +2,17 @@
 # Makefile for Marvell's PXA168 processors line
 #
 
-obj-y				+= common.o clock.o devices.o time.o
+obj-y				+= common.o clock.o devices.o time.o irq.o
 
 # SoC support
-obj-$(CONFIG_CPU_PXA168)	+= pxa168.o irq-pxa168.o
-obj-$(CONFIG_CPU_PXA910)	+= pxa910.o irq-pxa168.o
-obj-$(CONFIG_CPU_MMP2)		+= mmp2.o irq-mmp2.o sram.o
+obj-$(CONFIG_CPU_PXA168)	+= pxa168.o
+obj-$(CONFIG_CPU_PXA910)	+= pxa910.o
+obj-$(CONFIG_CPU_MMP2)		+= mmp2.o sram.o
+
+ifeq ($(CONFIG_PM),y)
+obj-$(CONFIG_CPU_PXA910)	+= pm-pxa910.o
+obj-$(CONFIG_CPU_MMP2)		+= pm-mmp2.o
+endif
 
 # board support
 obj-$(CONFIG_MACH_ASPENITE)	+= aspenite.o
@@ -19,5 +24,6 @@ obj-$(CONFIG_MACH_BROWNSTONE)	+= brownstone.o
 obj-$(CONFIG_MACH_FLINT)	+= flint.o
 obj-$(CONFIG_MACH_MARVELL_JASPER) += jasper.o
 obj-$(CONFIG_MACH_MMP_DT)	+= mmp-dt.o
+obj-$(CONFIG_MACH_MMP2_DT)	+= mmp2-dt.o
 obj-$(CONFIG_MACH_TETON_BGA)	+= teton_bga.o
 obj-$(CONFIG_MACH_GPLUGD)	+= gplugd.o
diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c
index bf5d8e195c3e..223090b1444d 100644
--- a/arch/arm/mach-mmp/aspenite.c
+++ b/arch/arm/mach-mmp/aspenite.c
@@ -17,6 +17,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
 #include <linux/interrupt.h>
+#include <linux/platform_data/mv_usb.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -221,6 +222,21 @@ static struct pxa27x_keypad_platform_data aspenite_keypad_info __initdata = {
 	.debounce_interval	= 30,
 };
 
+#if defined(CONFIG_USB_EHCI_MV)
+static char *pxa168_sph_clock_name[] = {
+	[0] = "PXA168-USBCLK",
+};
+
+static struct mv_usb_platform_data pxa168_sph_pdata = {
+	.clknum         = 1,
+	.clkname        = pxa168_sph_clock_name,
+	.mode           = MV_USB_MODE_HOST,
+	.phy_init	= pxa_usb_phy_init,
+	.phy_deinit	= pxa_usb_phy_deinit,
+	.set_vbus	= NULL,
+};
+#endif
+
 static void __init common_init(void)
 {
 	mfp_config(ARRAY_AND_SIZE(common_pin_config));
@@ -236,6 +252,10 @@ static void __init common_init(void)
 
 	/* off-chip devices */
 	platform_device_register(&smc91x_device);
+
+#if defined(CONFIG_USB_EHCI_MV)
+	pxa168_add_usb_host(&pxa168_sph_pdata);
+#endif
 }
 
 MACHINE_START(ASPENITE, "PXA168-based Aspenite Development Platform")
diff --git a/arch/arm/mach-mmp/devices.c b/arch/arm/mach-mmp/devices.c
index 191d9dea8731..dd2d8b103cc8 100644
--- a/arch/arm/mach-mmp/devices.c
+++ b/arch/arm/mach-mmp/devices.c
@@ -9,9 +9,13 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/delay.h>
 
 #include <asm/irq.h>
+#include <mach/irqs.h>
 #include <mach/devices.h>
+#include <mach/cputype.h>
+#include <mach/regs-usb.h>
 
 int __init pxa_register_device(struct pxa_device_desc *desc,
 				void *data, size_t size)
@@ -67,3 +71,281 @@ int __init pxa_register_device(struct pxa_device_desc *desc,
 
 	return platform_device_add(pdev);
 }
+
+#if defined(CONFIG_USB) || defined(CONFIG_USB_GADGET)
+
+/*****************************************************************************
+ * The registers read/write routines
+ *****************************************************************************/
+
+static unsigned int u2o_get(void __iomem *base, unsigned int offset)
+{
+	return readl_relaxed(base + offset);
+}
+
+static void u2o_set(void __iomem *base, unsigned int offset,
+		unsigned int value)
+{
+	u32 reg;
+
+	reg = readl_relaxed(base + offset);
+	reg |= value;
+	writel_relaxed(reg, base + offset);
+	readl_relaxed(base + offset);
+}
+
+static void u2o_clear(void __iomem *base, unsigned int offset,
+		unsigned int value)
+{
+	u32 reg;
+
+	reg = readl_relaxed(base + offset);
+	reg &= ~value;
+	writel_relaxed(reg, base + offset);
+	readl_relaxed(base + offset);
+}
+
+static void u2o_write(void __iomem *base, unsigned int offset,
+		unsigned int value)
+{
+	writel_relaxed(value, base + offset);
+	readl_relaxed(base + offset);
+}
+
+#if defined(CONFIG_USB_MV_UDC) || defined(CONFIG_USB_EHCI_MV)
+
+#if defined(CONFIG_CPU_PXA910) || defined(CONFIG_CPU_PXA168)
+
+static DEFINE_MUTEX(phy_lock);
+static int phy_init_cnt;
+
+static int usb_phy_init_internal(void __iomem *base)
+{
+	int loops;
+
+	pr_info("Init usb phy!!!\n");
+
+	/* Initialize the USB PHY power */
+	if (cpu_is_pxa910()) {
+		u2o_set(base, UTMI_CTRL, (1<<UTMI_CTRL_INPKT_DELAY_SOF_SHIFT)
+			| (1<<UTMI_CTRL_PU_REF_SHIFT));
+	}
+
+	u2o_set(base, UTMI_CTRL, 1<<UTMI_CTRL_PLL_PWR_UP_SHIFT);
+	u2o_set(base, UTMI_CTRL, 1<<UTMI_CTRL_PWR_UP_SHIFT);
+
+	/* UTMI_PLL settings */
+	u2o_clear(base, UTMI_PLL, UTMI_PLL_PLLVDD18_MASK
+		| UTMI_PLL_PLLVDD12_MASK | UTMI_PLL_PLLCALI12_MASK
+		| UTMI_PLL_FBDIV_MASK | UTMI_PLL_REFDIV_MASK
+		| UTMI_PLL_ICP_MASK | UTMI_PLL_KVCO_MASK);
+
+	u2o_set(base, UTMI_PLL, 0xee<<UTMI_PLL_FBDIV_SHIFT
+		| 0xb<<UTMI_PLL_REFDIV_SHIFT | 3<<UTMI_PLL_PLLVDD18_SHIFT
+		| 3<<UTMI_PLL_PLLVDD12_SHIFT | 3<<UTMI_PLL_PLLCALI12_SHIFT
+		| 1<<UTMI_PLL_ICP_SHIFT | 3<<UTMI_PLL_KVCO_SHIFT);
+
+	/* UTMI_TX */
+	u2o_clear(base, UTMI_TX, UTMI_TX_REG_EXT_FS_RCAL_EN_MASK
+		| UTMI_TX_TXVDD12_MASK | UTMI_TX_CK60_PHSEL_MASK
+		| UTMI_TX_IMPCAL_VTH_MASK | UTMI_TX_REG_EXT_FS_RCAL_MASK
+		| UTMI_TX_AMP_MASK);
+	u2o_set(base, UTMI_TX, 3<<UTMI_TX_TXVDD12_SHIFT
+		| 4<<UTMI_TX_CK60_PHSEL_SHIFT | 4<<UTMI_TX_IMPCAL_VTH_SHIFT
+		| 8<<UTMI_TX_REG_EXT_FS_RCAL_SHIFT | 3<<UTMI_TX_AMP_SHIFT);
+
+	/* UTMI_RX */
+	u2o_clear(base, UTMI_RX, UTMI_RX_SQ_THRESH_MASK
+		| UTMI_REG_SQ_LENGTH_MASK);
+	u2o_set(base, UTMI_RX, 7<<UTMI_RX_SQ_THRESH_SHIFT
+		| 2<<UTMI_REG_SQ_LENGTH_SHIFT);
+
+	/* UTMI_IVREF */
+	if (cpu_is_pxa168())
+		/* fixing Microsoft Altair board interface with NEC hub issue -
+		 * Set UTMI_IVREF from 0x4a3 to 0x4bf */
+		u2o_write(base, UTMI_IVREF, 0x4bf);
+
+	/* toggle VCOCAL_START bit of UTMI_PLL */
+	udelay(200);
+	u2o_set(base, UTMI_PLL, VCOCAL_START);
+	udelay(40);
+	u2o_clear(base, UTMI_PLL, VCOCAL_START);
+
+	/* toggle REG_RCAL_START bit of UTMI_TX */
+	udelay(400);
+	u2o_set(base, UTMI_TX, REG_RCAL_START);
+	udelay(40);
+	u2o_clear(base, UTMI_TX, REG_RCAL_START);
+	udelay(400);
+
+	/* Make sure PHY PLL is ready */
+	loops = 0;
+	while ((u2o_get(base, UTMI_PLL) & PLL_READY) == 0) {
+		mdelay(1);
+		loops++;
+		if (loops > 100) {
+			printk(KERN_WARNING "calibrate timeout, UTMI_PLL %x\n",
+				u2o_get(base, UTMI_PLL));
+			break;
+		}
+	}
+
+	if (cpu_is_pxa168()) {
+		u2o_set(base, UTMI_RESERVE, 1 << 5);
+		/* Turn on UTMI PHY OTG extension */
+		u2o_write(base, UTMI_OTG_ADDON, 1);
+	}
+
+	return 0;
+}
+
+static int usb_phy_deinit_internal(void __iomem *base)
+{
+	pr_info("Deinit usb phy!!!\n");
+
+	if (cpu_is_pxa168())
+		u2o_clear(base, UTMI_OTG_ADDON, UTMI_OTG_ADDON_OTG_ON);
+
+	u2o_clear(base, UTMI_CTRL, UTMI_CTRL_RXBUF_PDWN);
+	u2o_clear(base, UTMI_CTRL, UTMI_CTRL_TXBUF_PDWN);
+	u2o_clear(base, UTMI_CTRL, UTMI_CTRL_USB_CLK_EN);
+	u2o_clear(base, UTMI_CTRL, 1<<UTMI_CTRL_PWR_UP_SHIFT);
+	u2o_clear(base, UTMI_CTRL, 1<<UTMI_CTRL_PLL_PWR_UP_SHIFT);
+
+	return 0;
+}
+
+int pxa_usb_phy_init(void __iomem *phy_reg)
+{
+	mutex_lock(&phy_lock);
+	if (phy_init_cnt++ == 0)
+		usb_phy_init_internal(phy_reg);
+	mutex_unlock(&phy_lock);
+	return 0;
+}
+
+void pxa_usb_phy_deinit(void __iomem *phy_reg)
+{
+	WARN_ON(phy_init_cnt == 0);
+
+	mutex_lock(&phy_lock);
+	if (--phy_init_cnt == 0)
+		usb_phy_deinit_internal(phy_reg);
+	mutex_unlock(&phy_lock);
+}
+#endif
+#endif
+#endif
+
+#ifdef CONFIG_USB_SUPPORT
+static u64 usb_dma_mask = ~(u32)0;
+
+#ifdef CONFIG_USB_MV_UDC
+struct resource pxa168_u2o_resources[] = {
+	/* regbase */
+	[0] = {
+		.start	= PXA168_U2O_REGBASE + U2x_CAPREGS_OFFSET,
+		.end	= PXA168_U2O_REGBASE + USB_REG_RANGE,
+		.flags	= IORESOURCE_MEM,
+		.name	= "capregs",
+	},
+	/* phybase */
+	[1] = {
+		.start	= PXA168_U2O_PHYBASE,
+		.end	= PXA168_U2O_PHYBASE + USB_PHY_RANGE,
+		.flags	= IORESOURCE_MEM,
+		.name	= "phyregs",
+	},
+	[2] = {
+		.start	= IRQ_PXA168_USB1,
+		.end	= IRQ_PXA168_USB1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device pxa168_device_u2o = {
+	.name		= "mv-udc",
+	.id		= -1,
+	.resource	= pxa168_u2o_resources,
+	.num_resources	= ARRAY_SIZE(pxa168_u2o_resources),
+	.dev		=  {
+		.dma_mask	= &usb_dma_mask,
+		.coherent_dma_mask = 0xffffffff,
+	}
+};
+#endif /* CONFIG_USB_MV_UDC */
+
+#ifdef CONFIG_USB_EHCI_MV_U2O
+struct resource pxa168_u2oehci_resources[] = {
+	/* regbase */
+	[0] = {
+		.start	= PXA168_U2O_REGBASE + U2x_CAPREGS_OFFSET,
+		.end	= PXA168_U2O_REGBASE + USB_REG_RANGE,
+		.flags	= IORESOURCE_MEM,
+		.name	= "capregs",
+	},
+	/* phybase */
+	[1] = {
+		.start	= PXA168_U2O_PHYBASE,
+		.end	= PXA168_U2O_PHYBASE + USB_PHY_RANGE,
+		.flags	= IORESOURCE_MEM,
+		.name	= "phyregs",
+	},
+	[2] = {
+		.start	= IRQ_PXA168_USB1,
+		.end	= IRQ_PXA168_USB1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device pxa168_device_u2oehci = {
+	.name		= "pxa-u2oehci",
+	.id		= -1,
+	.dev		= {
+		.dma_mask		= &usb_dma_mask,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+
+	.num_resources	= ARRAY_SIZE(pxa168_u2oehci_resources),
+	.resource	= pxa168_u2oehci_resources,
+};
+#endif
+
+#if defined(CONFIG_USB_MV_OTG)
+struct resource pxa168_u2ootg_resources[] = {
+	/* regbase */
+	[0] = {
+		.start	= PXA168_U2O_REGBASE + U2x_CAPREGS_OFFSET,
+		.end	= PXA168_U2O_REGBASE + USB_REG_RANGE,
+		.flags	= IORESOURCE_MEM,
+		.name	= "capregs",
+	},
+	/* phybase */
+	[1] = {
+		.start	= PXA168_U2O_PHYBASE,
+		.end	= PXA168_U2O_PHYBASE + USB_PHY_RANGE,
+		.flags	= IORESOURCE_MEM,
+		.name	= "phyregs",
+	},
+	[2] = {
+		.start	= IRQ_PXA168_USB1,
+		.end	= IRQ_PXA168_USB1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device pxa168_device_u2ootg = {
+	.name		= "mv-otg",
+	.id		= -1,
+	.dev  = {
+		.dma_mask          = &usb_dma_mask,
+		.coherent_dma_mask = 0xffffffff,
+	},
+
+	.num_resources	= ARRAY_SIZE(pxa168_u2ootg_resources),
+	.resource      = pxa168_u2ootg_resources,
+};
+#endif /* CONFIG_USB_MV_OTG */
+
+#endif
diff --git a/arch/arm/mach-mmp/include/mach/addr-map.h b/arch/arm/mach-mmp/include/mach/addr-map.h
index b1ece08174e8..f88a44c0ef91 100644
--- a/arch/arm/mach-mmp/include/mach/addr-map.h
+++ b/arch/arm/mach-mmp/include/mach/addr-map.h
@@ -31,4 +31,16 @@
 #define SMC_CS1_PHYS_BASE	0x90000000
 #define SMC_CS1_PHYS_SIZE	0x10000000
 
+#define APMU_VIRT_BASE		(AXI_VIRT_BASE + 0x82800)
+#define APMU_REG(x)		(APMU_VIRT_BASE + (x))
+
+#define APBC_VIRT_BASE		(APB_VIRT_BASE + 0x015000)
+#define APBC_REG(x)		(APBC_VIRT_BASE + (x))
+
+#define MPMU_VIRT_BASE		(APB_VIRT_BASE + 0x50000)
+#define MPMU_REG(x)		(MPMU_VIRT_BASE + (x))
+
+#define CIU_VIRT_BASE		(AXI_VIRT_BASE + 0x82c00)
+#define CIU_REG(x)		(CIU_VIRT_BASE + (x))
+
 #endif /* __ASM_MACH_ADDR_MAP_H */
diff --git a/arch/arm/mach-mmp/include/mach/devices.h b/arch/arm/mach-mmp/include/mach/devices.h
index d0ec7dae88e4..21217ef11b64 100644
--- a/arch/arm/mach-mmp/include/mach/devices.h
+++ b/arch/arm/mach-mmp/include/mach/devices.h
@@ -50,4 +50,7 @@ struct pxa_device_desc mmp2_device_##_name __initdata = {		\
 }
 
 extern int pxa_register_device(struct pxa_device_desc *, void *, size_t);
+extern int pxa_usb_phy_init(void __iomem *phy_reg);
+extern void pxa_usb_phy_deinit(void __iomem *phy_reg);
+
 #endif /* __MACH_DEVICE_H */
diff --git a/arch/arm/mach-mmp/include/mach/entry-macro.S b/arch/arm/mach-mmp/include/mach/entry-macro.S
index 9cff9e7a2b26..bd152e24e6d7 100644
--- a/arch/arm/mach-mmp/include/mach/entry-macro.S
+++ b/arch/arm/mach-mmp/include/mach/entry-macro.S
@@ -6,13 +6,15 @@
  * published by the Free Software Foundation.
  */
 
+#include <asm/irq.h>
 #include <mach/regs-icu.h>
 
 	.macro	get_irqnr_preamble, base, tmp
 	mrc	p15, 0, \tmp, c0, c0, 0		@ CPUID
 	and	\tmp, \tmp, #0xff00
 	cmp	\tmp, #0x5800
-	ldr	\base, =ICU_VIRT_BASE
+	ldr	\base, =mmp_icu_base
+	ldr	\base, [\base, #0]
 	addne	\base, \base, #0x10c		@ PJ1 AP INT SEL register
 	addeq	\base, \base, #0x104		@ PJ4 IRQ SEL register
 	.endm
diff --git a/arch/arm/mach-mmp/include/mach/irqs.h b/arch/arm/mach-mmp/include/mach/irqs.h
index d0e746626a3d..fb492a50a817 100644
--- a/arch/arm/mach-mmp/include/mach/irqs.h
+++ b/arch/arm/mach-mmp/include/mach/irqs.h
@@ -125,7 +125,7 @@
 #define IRQ_MMP2_RTC_MUX		5
 #define IRQ_MMP2_TWSI1			7
 #define IRQ_MMP2_GPU			8
-#define IRQ_MMP2_KEYPAD			9
+#define IRQ_MMP2_KEYPAD_MUX		9
 #define IRQ_MMP2_ROTARY			10
 #define IRQ_MMP2_TRACKBALL		11
 #define IRQ_MMP2_ONEWIRE		12
@@ -163,11 +163,11 @@
 #define IRQ_MMP2_DMA_FIQ		47
 #define IRQ_MMP2_DMA_RIQ		48
 #define IRQ_MMP2_GPIO			49
-#define IRQ_MMP2_SSP_MUX		51
+#define IRQ_MMP2_MIPI_HSI1_MUX		51
 #define IRQ_MMP2_MMC2			52
 #define IRQ_MMP2_MMC3			53
 #define IRQ_MMP2_MMC4			54
-#define IRQ_MMP2_MIPI_HSI		55
+#define IRQ_MMP2_MIPI_HSI0_MUX		55
 #define IRQ_MMP2_MSP			58
 #define IRQ_MMP2_MIPI_SLIM_DMA		59
 #define IRQ_MMP2_PJ4_FREQ_CHG		60
@@ -186,8 +186,14 @@
 #define IRQ_MMP2_RTC_ALARM		(IRQ_MMP2_RTC_BASE + 0)
 #define IRQ_MMP2_RTC			(IRQ_MMP2_RTC_BASE + 1)
 
+/* secondary interrupt of INT #9 */
+#define IRQ_MMP2_KEYPAD_BASE		(IRQ_MMP2_RTC_BASE + 2)
+#define IRQ_MMP2_KPC			(IRQ_MMP2_KEYPAD_BASE + 0)
+#define IRQ_MMP2_ROTORY			(IRQ_MMP2_KEYPAD_BASE + 1)
+#define IRQ_MMP2_TBALL			(IRQ_MMP2_KEYPAD_BASE + 2)
+
 /* secondary interrupt of INT #17 */
-#define IRQ_MMP2_TWSI_BASE		(IRQ_MMP2_RTC_BASE + 2)
+#define IRQ_MMP2_TWSI_BASE		(IRQ_MMP2_KEYPAD_BASE + 3)
 #define IRQ_MMP2_TWSI2			(IRQ_MMP2_TWSI_BASE + 0)
 #define IRQ_MMP2_TWSI3			(IRQ_MMP2_TWSI_BASE + 1)
 #define IRQ_MMP2_TWSI4			(IRQ_MMP2_TWSI_BASE + 2)
@@ -212,11 +218,16 @@
 #define IRQ_MMP2_COMMRX			(IRQ_MMP2_MISC_BASE + 14)
 
 /* secondary interrupt of INT #51 */
-#define IRQ_MMP2_SSP_BASE		(IRQ_MMP2_MISC_BASE + 15)
-#define IRQ_MMP2_SSP1_SRDY		(IRQ_MMP2_SSP_BASE + 0)
-#define IRQ_MMP2_SSP3_SRDY		(IRQ_MMP2_SSP_BASE + 1)
+#define IRQ_MMP2_MIPI_HSI1_BASE		(IRQ_MMP2_MISC_BASE + 15)
+#define IRQ_MMP2_HSI1_CAWAKE		(IRQ_MMP2_MIPI_HSI1_BASE + 0)
+#define IRQ_MMP2_MIPI_HSI_INT1		(IRQ_MMP2_MIPI_HSI1_BASE + 1)
+
+/* secondary interrupt of INT #55 */
+#define IRQ_MMP2_MIPI_HSI0_BASE		(IRQ_MMP2_MIPI_HSI1_BASE + 2)
+#define IRQ_MMP2_HSI0_CAWAKE		(IRQ_MMP2_MIPI_HSI0_BASE + 0)
+#define IRQ_MMP2_MIPI_HSI_INT0		(IRQ_MMP2_MIPI_HSI0_BASE + 1)
 
-#define IRQ_MMP2_MUX_END		(IRQ_MMP2_SSP_BASE + 2)
+#define IRQ_MMP2_MUX_END		(IRQ_MMP2_MIPI_HSI0_BASE + 2)
 
 #define IRQ_GPIO_START			128
 #define MMP_NR_BUILTIN_GPIO		192
diff --git a/arch/arm/mach-mmp/include/mach/pm-mmp2.h b/arch/arm/mach-mmp/include/mach/pm-mmp2.h
new file mode 100644
index 000000000000..98bd66ce8006
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/pm-mmp2.h
@@ -0,0 +1,61 @@
+/*
+ * MMP2 Power Management Routines
+ *
+ * This software program is licensed subject to the GNU General Public License
+ * (GPL).Version 2,June 1991, available at http://www.fsf.org/copyleft/gpl.html
+ *
+ * (C) Copyright 2010 Marvell International Ltd.
+ * All Rights Reserved
+ */
+
+#ifndef __MMP2_PM_H__
+#define __MMP2_PM_H__
+
+#include <mach/addr-map.h>
+
+#define APMU_PJ_IDLE_CFG			APMU_REG(0x018)
+#define APMU_PJ_IDLE_CFG_PJ_IDLE		(1 << 1)
+#define APMU_PJ_IDLE_CFG_PJ_PWRDWN		(1 << 5)
+#define APMU_PJ_IDLE_CFG_PWR_SW(x)		((x) << 16)
+#define APMU_PJ_IDLE_CFG_L2_PWR_SW		(1 << 19)
+#define APMU_PJ_IDLE_CFG_ISO_MODE_CNTRL_MASK	(3 << 28)
+
+#define APMU_SRAM_PWR_DWN			APMU_REG(0x08c)
+
+#define MPMU_SCCR				MPMU_REG(0x038)
+#define MPMU_PCR_PJ				MPMU_REG(0x1000)
+#define MPMU_PCR_PJ_AXISD			(1 << 31)
+#define MPMU_PCR_PJ_SLPEN			(1 << 29)
+#define MPMU_PCR_PJ_SPSD			(1 << 28)
+#define MPMU_PCR_PJ_DDRCORSD			(1 << 27)
+#define MPMU_PCR_PJ_APBSD			(1 << 26)
+#define MPMU_PCR_PJ_INTCLR			(1 << 24)
+#define MPMU_PCR_PJ_SLPWP0			(1 << 23)
+#define MPMU_PCR_PJ_SLPWP1			(1 << 22)
+#define MPMU_PCR_PJ_SLPWP2			(1 << 21)
+#define MPMU_PCR_PJ_SLPWP3			(1 << 20)
+#define MPMU_PCR_PJ_VCTCXOSD			(1 << 19)
+#define MPMU_PCR_PJ_SLPWP4			(1 << 18)
+#define MPMU_PCR_PJ_SLPWP5			(1 << 17)
+#define MPMU_PCR_PJ_SLPWP6			(1 << 16)
+#define MPMU_PCR_PJ_SLPWP7			(1 << 15)
+
+#define MPMU_PLL2_CTRL1				MPMU_REG(0x0414)
+#define MPMU_CGR_PJ				MPMU_REG(0x1024)
+#define MPMU_WUCRM_PJ				MPMU_REG(0x104c)
+#define MPMU_WUCRM_PJ_WAKEUP(x)			(1 << (x))
+#define MPMU_WUCRM_PJ_RTC_ALARM			(1 << 17)
+
+enum {
+	POWER_MODE_ACTIVE = 0,
+	POWER_MODE_CORE_INTIDLE,
+	POWER_MODE_CORE_EXTIDLE,
+	POWER_MODE_APPS_IDLE,
+	POWER_MODE_APPS_SLEEP,
+	POWER_MODE_CHIP_SLEEP,
+	POWER_MODE_SYS_SLEEP,
+};
+
+extern void mmp2_pm_enter_lowpower_mode(int state);
+extern int mmp2_set_wake(struct irq_data *d, unsigned int on);
+#endif
diff --git a/arch/arm/mach-mmp/include/mach/pm-pxa910.h b/arch/arm/mach-mmp/include/mach/pm-pxa910.h
new file mode 100644
index 000000000000..8cac8ab5253d
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/pm-pxa910.h
@@ -0,0 +1,77 @@
+/*
+ * PXA910 Power Management Routines
+ *
+ * This software program is licensed subject to the GNU General Public License
+ * (GPL).Version 2,June 1991, available at http://www.fsf.org/copyleft/gpl.html
+ *
+ * (C) Copyright 2009 Marvell International Ltd.
+ * All Rights Reserved
+ */
+
+#ifndef __PXA910_PM_H__
+#define __PXA910_PM_H__
+
+#define APMU_MOH_IDLE_CFG			APMU_REG(0x0018)
+#define APMU_MOH_IDLE_CFG_MOH_IDLE		(1 << 1)
+#define APMU_MOH_IDLE_CFG_MOH_PWRDWN		(1 << 5)
+#define APMU_MOH_IDLE_CFG_MOH_SRAM_PWRDWN	(1 << 6)
+#define APMU_MOH_IDLE_CFG_MOH_PWR_SW(x)		(((x) & 0x3) << 16)
+#define APMU_MOH_IDLE_CFG_MOH_L2_PWR_SW(x)	(((x) & 0x3) << 18)
+#define APMU_MOH_IDLE_CFG_MOH_DIS_MC_SW_REQ	(1 << 21)
+#define APMU_MOH_IDLE_CFG_MOH_MC_WAKE_EN	(1 << 20)
+
+#define APMU_SQU_CLK_GATE_CTRL			APMU_REG(0x001c)
+#define APMU_MC_HW_SLP_TYPE			APMU_REG(0x00b0)
+
+#define MPMU_FCCR				MPMU_REG(0x0008)
+#define MPMU_APCR				MPMU_REG(0x1000)
+#define MPMU_APCR_AXISD				(1 << 31)
+#define MPMU_APCR_DSPSD				(1 << 30)
+#define MPMU_APCR_SLPEN				(1 << 29)
+#define MPMU_APCR_DTCMSD			(1 << 28)
+#define MPMU_APCR_DDRCORSD			(1 << 27)
+#define MPMU_APCR_APBSD				(1 << 26)
+#define MPMU_APCR_BBSD				(1 << 25)
+#define MPMU_APCR_SLPWP0			(1 << 23)
+#define MPMU_APCR_SLPWP1			(1 << 22)
+#define MPMU_APCR_SLPWP2			(1 << 21)
+#define MPMU_APCR_SLPWP3			(1 << 20)
+#define MPMU_APCR_VCTCXOSD			(1 << 19)
+#define MPMU_APCR_SLPWP4			(1 << 18)
+#define MPMU_APCR_SLPWP5			(1 << 17)
+#define MPMU_APCR_SLPWP6			(1 << 16)
+#define MPMU_APCR_SLPWP7			(1 << 15)
+#define MPMU_APCR_MSASLPEN			(1 << 14)
+#define MPMU_APCR_STBYEN			(1 << 13)
+
+#define MPMU_AWUCRM				MPMU_REG(0x104c)
+#define MPMU_AWUCRM_AP_ASYNC_INT		(1 << 25)
+#define MPMU_AWUCRM_AP_FULL_IDLE		(1 << 24)
+#define MPMU_AWUCRM_SDH1			(1 << 23)
+#define MPMU_AWUCRM_SDH2			(1 << 22)
+#define MPMU_AWUCRM_KEYPRESS			(1 << 21)
+#define MPMU_AWUCRM_TRACKBALL			(1 << 20)
+#define MPMU_AWUCRM_NEWROTARY			(1 << 19)
+#define MPMU_AWUCRM_RTC_ALARM			(1 << 17)
+#define MPMU_AWUCRM_AP2_TIMER_3			(1 << 13)
+#define MPMU_AWUCRM_AP2_TIMER_2			(1 << 12)
+#define MPMU_AWUCRM_AP2_TIMER_1			(1 << 11)
+#define MPMU_AWUCRM_AP1_TIMER_3			(1 << 10)
+#define MPMU_AWUCRM_AP1_TIMER_2			(1 << 9)
+#define MPMU_AWUCRM_AP1_TIMER_1			(1 << 8)
+#define MPMU_AWUCRM_WAKEUP(x)			(1 << ((x) & 0x7))
+
+enum {
+	POWER_MODE_ACTIVE = 0,
+	POWER_MODE_CORE_INTIDLE,
+	POWER_MODE_CORE_EXTIDLE,
+	POWER_MODE_APPS_IDLE,
+	POWER_MODE_APPS_SLEEP,
+	POWER_MODE_SYS_SLEEP,
+	POWER_MODE_HIBERNATE,
+	POWER_MODE_UDR,
+};
+
+extern int pxa910_set_wake(struct irq_data *data, unsigned int on);
+
+#endif
diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h
index dc03d580a06d..09dcd6e2b6a8 100644
--- a/arch/arm/mach-mmp/include/mach/pxa168.h
+++ b/arch/arm/mach-mmp/include/mach/pxa168.h
@@ -16,6 +16,7 @@ extern void pxa168_clear_keypad_wakeup(void);
 #include <plat/pxa27x_keypad.h>
 #include <mach/cputype.h>
 #include <linux/pxa168_eth.h>
+#include <linux/platform_data/mv_usb.h>
 
 extern struct pxa_device_desc pxa168_device_uart1;
 extern struct pxa_device_desc pxa168_device_uart2;
@@ -36,12 +37,9 @@ extern struct pxa_device_desc pxa168_device_fb;
 extern struct pxa_device_desc pxa168_device_keypad;
 extern struct pxa_device_desc pxa168_device_eth;
 
-struct pxa168_usb_pdata {
-	/* If NULL, default phy init routine for PXA168 would be called */
-	int (*phy_init)(void __iomem *usb_phy_reg_base);
-};
 /* pdata can be NULL */
-int __init pxa168_add_usb_host(struct pxa168_usb_pdata *pdata);
+extern int __init pxa168_add_usb_host(struct mv_usb_platform_data *pdata);
+
 
 extern struct platform_device pxa168_device_gpio;
 
diff --git a/arch/arm/mach-mmp/include/mach/pxa910.h b/arch/arm/mach-mmp/include/mach/pxa910.h
index e2e1f1e5e124..793634c837ef 100644
--- a/arch/arm/mach-mmp/include/mach/pxa910.h
+++ b/arch/arm/mach-mmp/include/mach/pxa910.h
@@ -20,6 +20,9 @@ extern struct pxa_device_desc pxa910_device_pwm2;
 extern struct pxa_device_desc pxa910_device_pwm3;
 extern struct pxa_device_desc pxa910_device_pwm4;
 extern struct pxa_device_desc pxa910_device_nand;
+extern struct platform_device pxa168_device_u2o;
+extern struct platform_device pxa168_device_u2ootg;
+extern struct platform_device pxa168_device_u2oehci;
 
 extern struct platform_device pxa910_device_gpio;
 extern struct platform_device pxa910_device_rtc;
diff --git a/arch/arm/mach-mmp/include/mach/regs-apbc.h b/arch/arm/mach-mmp/include/mach/regs-apbc.h
index 8a37fb003655..68b0c93ec6a1 100644
--- a/arch/arm/mach-mmp/include/mach/regs-apbc.h
+++ b/arch/arm/mach-mmp/include/mach/regs-apbc.h
@@ -13,9 +13,6 @@
 
 #include <mach/addr-map.h>
 
-#define APBC_VIRT_BASE	(APB_VIRT_BASE + 0x015000)
-#define APBC_REG(x)	(APBC_VIRT_BASE + (x))
-
 /*
  * APB clock register offsets for PXA168
  */
diff --git a/arch/arm/mach-mmp/include/mach/regs-apmu.h b/arch/arm/mach-mmp/include/mach/regs-apmu.h
index 8447ac63e28f..7af8deb63e83 100644
--- a/arch/arm/mach-mmp/include/mach/regs-apmu.h
+++ b/arch/arm/mach-mmp/include/mach/regs-apmu.h
@@ -13,9 +13,6 @@
 
 #include <mach/addr-map.h>
 
-#define APMU_VIRT_BASE	(AXI_VIRT_BASE + 0x82800)
-#define APMU_REG(x)	(APMU_VIRT_BASE + (x))
-
 /* Clock Reset Control */
 #define APMU_IRE	APMU_REG(0x048)
 #define APMU_LCD	APMU_REG(0x04c)
diff --git a/arch/arm/mach-mmp/include/mach/regs-usb.h b/arch/arm/mach-mmp/include/mach/regs-usb.h
new file mode 100644
index 000000000000..b047bf487506
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/regs-usb.h
@@ -0,0 +1,253 @@
+/*
+ * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASM_ARCH_REGS_USB_H
+#define __ASM_ARCH_REGS_USB_H
+
+#define PXA168_U2O_REGBASE	(0xd4208000)
+#define PXA168_U2O_PHYBASE	(0xd4207000)
+
+#define PXA168_U2H_REGBASE      (0xd4209000)
+#define PXA168_U2H_PHYBASE      (0xd4206000)
+
+#define MMP3_HSIC1_REGBASE	(0xf0001000)
+#define MMP3_HSIC1_PHYBASE	(0xf0001800)
+
+#define MMP3_HSIC2_REGBASE	(0xf0002000)
+#define MMP3_HSIC2_PHYBASE	(0xf0002800)
+
+#define MMP3_FSIC_REGBASE	(0xf0003000)
+#define MMP3_FSIC_PHYBASE	(0xf0003800)
+
+
+#define USB_REG_RANGE		(0x1ff)
+#define USB_PHY_RANGE		(0xff)
+
+/* registers */
+#define U2x_CAPREGS_OFFSET       0x100
+
+/* phy regs */
+#define UTMI_REVISION		0x0
+#define UTMI_CTRL		0x4
+#define UTMI_PLL		0x8
+#define UTMI_TX			0xc
+#define UTMI_RX			0x10
+#define UTMI_IVREF		0x14
+#define UTMI_T0			0x18
+#define UTMI_T1			0x1c
+#define UTMI_T2			0x20
+#define UTMI_T3			0x24
+#define UTMI_T4			0x28
+#define UTMI_T5			0x2c
+#define UTMI_RESERVE		0x30
+#define UTMI_USB_INT		0x34
+#define UTMI_DBG_CTL		0x38
+#define UTMI_OTG_ADDON		0x3c
+
+/* For UTMICTRL Register */
+#define UTMI_CTRL_USB_CLK_EN                    (1 << 31)
+/* pxa168 */
+#define UTMI_CTRL_SUSPEND_SET1                  (1 << 30)
+#define UTMI_CTRL_SUSPEND_SET2                  (1 << 29)
+#define UTMI_CTRL_RXBUF_PDWN                    (1 << 24)
+#define UTMI_CTRL_TXBUF_PDWN                    (1 << 11)
+
+#define UTMI_CTRL_INPKT_DELAY_SHIFT             30
+#define UTMI_CTRL_INPKT_DELAY_SOF_SHIFT		28
+#define UTMI_CTRL_PU_REF_SHIFT			20
+#define UTMI_CTRL_ARC_PULLDN_SHIFT              12
+#define UTMI_CTRL_PLL_PWR_UP_SHIFT              1
+#define UTMI_CTRL_PWR_UP_SHIFT                  0
+
+/* For UTMI_PLL Register */
+#define UTMI_PLL_PLLCALI12_SHIFT		29
+#define UTMI_PLL_PLLCALI12_MASK			(0x3 << 29)
+
+#define UTMI_PLL_PLLVDD18_SHIFT			27
+#define UTMI_PLL_PLLVDD18_MASK			(0x3 << 27)
+
+#define UTMI_PLL_PLLVDD12_SHIFT			25
+#define UTMI_PLL_PLLVDD12_MASK			(0x3 << 25)
+
+#define UTMI_PLL_CLK_BLK_EN_SHIFT               24
+#define CLK_BLK_EN                              (0x1 << 24)
+#define PLL_READY                               (0x1 << 23)
+#define KVCO_EXT                                (0x1 << 22)
+#define VCOCAL_START                            (0x1 << 21)
+
+#define UTMI_PLL_KVCO_SHIFT			15
+#define UTMI_PLL_KVCO_MASK                      (0x7 << 15)
+
+#define UTMI_PLL_ICP_SHIFT			12
+#define UTMI_PLL_ICP_MASK                       (0x7 << 12)
+
+#define UTMI_PLL_FBDIV_SHIFT                    4
+#define UTMI_PLL_FBDIV_MASK                     (0xFF << 4)
+
+#define UTMI_PLL_REFDIV_SHIFT                   0
+#define UTMI_PLL_REFDIV_MASK                    (0xF << 0)
+
+/* For UTMI_TX Register */
+#define UTMI_TX_REG_EXT_FS_RCAL_SHIFT		27
+#define UTMI_TX_REG_EXT_FS_RCAL_MASK		(0xf << 27)
+
+#define UTMI_TX_REG_EXT_FS_RCAL_EN_SHIFT	26
+#define UTMI_TX_REG_EXT_FS_RCAL_EN_MASK		(0x1 << 26)
+
+#define UTMI_TX_TXVDD12_SHIFT                   22
+#define UTMI_TX_TXVDD12_MASK                    (0x3 << 22)
+
+#define UTMI_TX_CK60_PHSEL_SHIFT                17
+#define UTMI_TX_CK60_PHSEL_MASK                 (0xf << 17)
+
+#define UTMI_TX_IMPCAL_VTH_SHIFT                14
+#define UTMI_TX_IMPCAL_VTH_MASK                 (0x7 << 14)
+
+#define REG_RCAL_START                          (0x1 << 12)
+
+#define UTMI_TX_LOW_VDD_EN_SHIFT                11
+
+#define UTMI_TX_AMP_SHIFT			0
+#define UTMI_TX_AMP_MASK			(0x7 << 0)
+
+/* For UTMI_RX Register */
+#define UTMI_REG_SQ_LENGTH_SHIFT                15
+#define UTMI_REG_SQ_LENGTH_MASK                 (0x3 << 15)
+
+#define UTMI_RX_SQ_THRESH_SHIFT                 4
+#define UTMI_RX_SQ_THRESH_MASK                  (0xf << 4)
+
+#define UTMI_OTG_ADDON_OTG_ON			(1 << 0)
+
+/* For MMP3 USB Phy */
+#define USB2_PLL_REG0		0x4
+#define USB2_PLL_REG1		0x8
+#define USB2_TX_REG0		0x10
+#define USB2_TX_REG1		0x14
+#define USB2_TX_REG2		0x18
+#define USB2_RX_REG0		0x20
+#define USB2_RX_REG1		0x24
+#define USB2_RX_REG2		0x28
+#define USB2_ANA_REG0		0x30
+#define USB2_ANA_REG1		0x34
+#define USB2_ANA_REG2		0x38
+#define USB2_DIG_REG0		0x3C
+#define USB2_DIG_REG1		0x40
+#define USB2_DIG_REG2		0x44
+#define USB2_DIG_REG3		0x48
+#define USB2_TEST_REG0		0x4C
+#define USB2_TEST_REG1		0x50
+#define USB2_TEST_REG2		0x54
+#define USB2_CHARGER_REG0	0x58
+#define USB2_OTG_REG0		0x5C
+#define USB2_PHY_MON0		0x60
+#define USB2_RESETVE_REG0	0x64
+#define USB2_ICID_REG0		0x78
+#define USB2_ICID_REG1		0x7C
+
+/* USB2_PLL_REG0 */
+/* This is for Ax stepping */
+#define USB2_PLL_FBDIV_SHIFT_MMP3		0
+#define USB2_PLL_FBDIV_MASK_MMP3		(0xFF << 0)
+
+#define USB2_PLL_REFDIV_SHIFT_MMP3		8
+#define USB2_PLL_REFDIV_MASK_MMP3		(0xF << 8)
+
+#define USB2_PLL_VDD12_SHIFT_MMP3		12
+#define USB2_PLL_VDD18_SHIFT_MMP3		14
+
+/* This is for B0 stepping */
+#define USB2_PLL_FBDIV_SHIFT_MMP3_B0		0
+#define USB2_PLL_REFDIV_SHIFT_MMP3_B0		9
+#define USB2_PLL_VDD18_SHIFT_MMP3_B0		14
+#define USB2_PLL_FBDIV_MASK_MMP3_B0		0x01FF
+#define USB2_PLL_REFDIV_MASK_MMP3_B0		0x3E00
+
+#define USB2_PLL_CAL12_SHIFT_MMP3		0
+#define USB2_PLL_CALI12_MASK_MMP3		(0x3 << 0)
+
+#define USB2_PLL_VCOCAL_START_SHIFT_MMP3	2
+
+#define USB2_PLL_KVCO_SHIFT_MMP3		4
+#define USB2_PLL_KVCO_MASK_MMP3			(0x7<<4)
+
+#define USB2_PLL_ICP_SHIFT_MMP3			8
+#define USB2_PLL_ICP_MASK_MMP3			(0x7<<8)
+
+#define USB2_PLL_LOCK_BYPASS_SHIFT_MMP3		12
+
+#define USB2_PLL_PU_PLL_SHIFT_MMP3		13
+#define USB2_PLL_PU_PLL_MASK			(0x1 << 13)
+
+#define USB2_PLL_READY_MASK_MMP3		(0x1 << 15)
+
+/* USB2_TX_REG0 */
+#define USB2_TX_IMPCAL_VTH_SHIFT_MMP3		8
+#define USB2_TX_IMPCAL_VTH_MASK_MMP3		(0x7 << 8)
+
+#define USB2_TX_RCAL_START_SHIFT_MMP3		13
+
+/* USB2_TX_REG1 */
+#define USB2_TX_CK60_PHSEL_SHIFT_MMP3		0
+#define USB2_TX_CK60_PHSEL_MASK_MMP3		(0xf << 0)
+
+#define USB2_TX_AMP_SHIFT_MMP3			4
+#define USB2_TX_AMP_MASK_MMP3			(0x7 << 4)
+
+#define USB2_TX_VDD12_SHIFT_MMP3		8
+#define USB2_TX_VDD12_MASK_MMP3			(0x3 << 8)
+
+/* USB2_TX_REG2 */
+#define USB2_TX_DRV_SLEWRATE_SHIFT		10
+
+/* USB2_RX_REG0 */
+#define USB2_RX_SQ_THRESH_SHIFT_MMP3		4
+#define USB2_RX_SQ_THRESH_MASK_MMP3		(0xf << 4)
+
+#define USB2_RX_SQ_LENGTH_SHIFT_MMP3		10
+#define USB2_RX_SQ_LENGTH_MASK_MMP3		(0x3 << 10)
+
+/* USB2_ANA_REG1*/
+#define USB2_ANA_PU_ANA_SHIFT_MMP3		14
+
+/* USB2_OTG_REG0 */
+#define USB2_OTG_PU_OTG_SHIFT_MMP3		3
+
+/* fsic registers */
+#define FSIC_MISC			0x4
+#define FSIC_INT			0x28
+#define FSIC_CTRL			0x30
+
+/* HSIC registers */
+#define HSIC_PAD_CTRL			0x4
+
+#define HSIC_CTRL			0x8
+#define HSIC_CTRL_HSIC_ENABLE		(1<<7)
+#define HSIC_CTRL_PLL_BYPASS		(1<<4)
+
+#define TEST_GRP_0			0xc
+#define TEST_GRP_1			0x10
+
+#define HSIC_INT			0x14
+#define HSIC_INT_READY_INT_EN		(1<<10)
+#define HSIC_INT_CONNECT_INT_EN		(1<<9)
+#define HSIC_INT_CORE_INT_EN		(1<<8)
+#define HSIC_INT_HS_READY		(1<<2)
+#define HSIC_INT_CONNECT		(1<<1)
+#define HSIC_INT_CORE			(1<<0)
+
+#define HSIC_CONFIG			0x18
+#define USBHSIC_CTRL			0x20
+
+#define HSIC_USB_CTRL			0x28
+#define HSIC_USB_CTRL_CLKEN		1
+#define	HSIC_USB_CLK_PHY		0x0
+#define HSIC_USB_CLK_PMU		0x1
+
+#endif /* __ASM_ARCH_PXA_U2O_H */
diff --git a/arch/arm/mach-mmp/irq-mmp2.c b/arch/arm/mach-mmp/irq-mmp2.c
deleted file mode 100644
index 7895d277421e..000000000000
--- a/arch/arm/mach-mmp/irq-mmp2.c
+++ /dev/null
@@ -1,158 +0,0 @@
-/*
- *  linux/arch/arm/mach-mmp/irq-mmp2.c
- *
- *  Generic IRQ handling, GPIO IRQ demultiplexing, etc.
- *
- *  Author:	Haojian Zhuang <haojian.zhuang@marvell.com>
- *  Copyright:	Marvell International Ltd.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <mach/irqs.h>
-#include <mach/regs-icu.h>
-#include <mach/mmp2.h>
-
-#include "common.h"
-
-static void icu_mask_irq(struct irq_data *d)
-{
-	uint32_t r = __raw_readl(ICU_INT_CONF(d->irq));
-
-	r &= ~ICU_INT_ROUTE_PJ4_IRQ;
-	__raw_writel(r, ICU_INT_CONF(d->irq));
-}
-
-static void icu_unmask_irq(struct irq_data *d)
-{
-	uint32_t r = __raw_readl(ICU_INT_CONF(d->irq));
-
-	r |= ICU_INT_ROUTE_PJ4_IRQ;
-	__raw_writel(r, ICU_INT_CONF(d->irq));
-}
-
-static struct irq_chip icu_irq_chip = {
-	.name		= "icu_irq",
-	.irq_mask	= icu_mask_irq,
-	.irq_mask_ack	= icu_mask_irq,
-	.irq_unmask	= icu_unmask_irq,
-};
-
-static void pmic_irq_ack(struct irq_data *d)
-{
-	if (d->irq == IRQ_MMP2_PMIC)
-		mmp2_clear_pmic_int();
-}
-
-#define SECOND_IRQ_MASK(_name_, irq_base, prefix)			\
-static void _name_##_mask_irq(struct irq_data *d)			\
-{									\
-	uint32_t r;							\
-	r = __raw_readl(prefix##_MASK) | (1 << (d->irq - irq_base));	\
-	__raw_writel(r, prefix##_MASK);					\
-}
-
-#define SECOND_IRQ_UNMASK(_name_, irq_base, prefix)			\
-static void _name_##_unmask_irq(struct irq_data *d)			\
-{									\
-	uint32_t r;							\
-	r = __raw_readl(prefix##_MASK) & ~(1 << (d->irq - irq_base));	\
-	__raw_writel(r, prefix##_MASK);					\
-}
-
-#define SECOND_IRQ_DEMUX(_name_, irq_base, prefix)			\
-static void _name_##_irq_demux(unsigned int irq, struct irq_desc *desc)	\
-{									\
-	unsigned long status, mask, n;					\
-	mask = __raw_readl(prefix##_MASK);				\
-	while (1) {							\
-		status = __raw_readl(prefix##_STATUS) & ~mask;		\
-		if (status == 0)					\
-			break;						\
-		n = find_first_bit(&status, BITS_PER_LONG);		\
-		while (n < BITS_PER_LONG) {				\
-			generic_handle_irq(irq_base + n);		\
-			n = find_next_bit(&status, BITS_PER_LONG, n+1);	\
-		}							\
-	}								\
-}
-
-#define SECOND_IRQ_CHIP(_name_, irq_base, prefix)			\
-SECOND_IRQ_MASK(_name_, irq_base, prefix)				\
-SECOND_IRQ_UNMASK(_name_, irq_base, prefix)				\
-SECOND_IRQ_DEMUX(_name_, irq_base, prefix)				\
-static struct irq_chip _name_##_irq_chip = {				\
-	.name		= #_name_,					\
-	.irq_mask	= _name_##_mask_irq,				\
-	.irq_unmask	= _name_##_unmask_irq,				\
-}
-
-SECOND_IRQ_CHIP(pmic, IRQ_MMP2_PMIC_BASE, MMP2_ICU_INT4);
-SECOND_IRQ_CHIP(rtc,  IRQ_MMP2_RTC_BASE,  MMP2_ICU_INT5);
-SECOND_IRQ_CHIP(twsi, IRQ_MMP2_TWSI_BASE, MMP2_ICU_INT17);
-SECOND_IRQ_CHIP(misc, IRQ_MMP2_MISC_BASE, MMP2_ICU_INT35);
-SECOND_IRQ_CHIP(ssp,  IRQ_MMP2_SSP_BASE,  MMP2_ICU_INT51);
-
-static void init_mux_irq(struct irq_chip *chip, int start, int num)
-{
-	int irq;
-
-	for (irq = start; num > 0; irq++, num--) {
-		struct irq_data *d = irq_get_irq_data(irq);
-
-		/* mask and clear the IRQ */
-		chip->irq_mask(d);
-		if (chip->irq_ack)
-			chip->irq_ack(d);
-
-		irq_set_chip(irq, chip);
-		set_irq_flags(irq, IRQF_VALID);
-		irq_set_handler(irq, handle_level_irq);
-	}
-}
-
-void __init mmp2_init_icu(void)
-{
-	int irq;
-
-	for (irq = 0; irq < IRQ_MMP2_MUX_BASE; irq++) {
-		icu_mask_irq(irq_get_irq_data(irq));
-		irq_set_chip(irq, &icu_irq_chip);
-		set_irq_flags(irq, IRQF_VALID);
-
-		switch (irq) {
-		case IRQ_MMP2_PMIC_MUX:
-		case IRQ_MMP2_RTC_MUX:
-		case IRQ_MMP2_TWSI_MUX:
-		case IRQ_MMP2_MISC_MUX:
-		case IRQ_MMP2_SSP_MUX:
-			break;
-		default:
-			irq_set_handler(irq, handle_level_irq);
-			break;
-		}
-	}
-
-	/* NOTE: IRQ_MMP2_PMIC requires the PMIC MFPR register
-	 * to be written to clear the interrupt
-	 */
-	pmic_irq_chip.irq_ack = pmic_irq_ack;
-
-	init_mux_irq(&pmic_irq_chip, IRQ_MMP2_PMIC_BASE, 2);
-	init_mux_irq(&rtc_irq_chip, IRQ_MMP2_RTC_BASE, 2);
-	init_mux_irq(&twsi_irq_chip, IRQ_MMP2_TWSI_BASE, 5);
-	init_mux_irq(&misc_irq_chip, IRQ_MMP2_MISC_BASE, 15);
-	init_mux_irq(&ssp_irq_chip, IRQ_MMP2_SSP_BASE, 2);
-
-	irq_set_chained_handler(IRQ_MMP2_PMIC_MUX, pmic_irq_demux);
-	irq_set_chained_handler(IRQ_MMP2_RTC_MUX, rtc_irq_demux);
-	irq_set_chained_handler(IRQ_MMP2_TWSI_MUX, twsi_irq_demux);
-	irq_set_chained_handler(IRQ_MMP2_MISC_MUX, misc_irq_demux);
-	irq_set_chained_handler(IRQ_MMP2_SSP_MUX, ssp_irq_demux);
-}
diff --git a/arch/arm/mach-mmp/irq-pxa168.c b/arch/arm/mach-mmp/irq-pxa168.c
deleted file mode 100644
index 89706a0d08f1..000000000000
--- a/arch/arm/mach-mmp/irq-pxa168.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- *  linux/arch/arm/mach-mmp/irq.c
- *
- *  Generic IRQ handling, GPIO IRQ demultiplexing, etc.
- *
- *  Author:	Bin Yang <bin.yang@marvell.com>
- *  Created:	Sep 30, 2008
- *  Copyright:	Marvell International Ltd.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <mach/regs-icu.h>
-
-#include "common.h"
-
-#define IRQ_ROUTE_TO_AP		(ICU_INT_CONF_AP_INT | ICU_INT_CONF_IRQ)
-
-#define PRIORITY_DEFAULT	0x1
-#define PRIORITY_NONE		0x0	/* means IRQ disabled */
-
-static void icu_mask_irq(struct irq_data *d)
-{
-	__raw_writel(PRIORITY_NONE, ICU_INT_CONF(d->irq));
-}
-
-static void icu_unmask_irq(struct irq_data *d)
-{
-	__raw_writel(IRQ_ROUTE_TO_AP | PRIORITY_DEFAULT, ICU_INT_CONF(d->irq));
-}
-
-static struct irq_chip icu_irq_chip = {
-	.name		= "icu_irq",
-	.irq_ack	= icu_mask_irq,
-	.irq_mask	= icu_mask_irq,
-	.irq_unmask	= icu_unmask_irq,
-};
-
-void __init icu_init_irq(void)
-{
-	int irq;
-
-	for (irq = 0; irq < 64; irq++) {
-		icu_mask_irq(irq_get_irq_data(irq));
-		irq_set_chip_and_handler(irq, &icu_irq_chip, handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID);
-	}
-}
diff --git a/arch/arm/mach-mmp/irq.c b/arch/arm/mach-mmp/irq.c
new file mode 100644
index 000000000000..fcfe0e3bd701
--- /dev/null
+++ b/arch/arm/mach-mmp/irq.c
@@ -0,0 +1,458 @@
+/*
+ *  linux/arch/arm/mach-mmp/irq.c
+ *
+ *  Generic IRQ handling, GPIO IRQ demultiplexing, etc.
+ *  Copyright (C) 2008 - 2012 Marvell Technology Group Ltd.
+ *
+ *  Author:	Bin Yang <bin.yang@marvell.com>
+ *              Haojian Zhuang <haojian.zhuang@gmail.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+#include <mach/irqs.h>
+
+#ifdef CONFIG_CPU_MMP2
+#include <mach/pm-mmp2.h>
+#endif
+#ifdef CONFIG_CPU_PXA910
+#include <mach/pm-pxa910.h>
+#endif
+
+#include "common.h"
+
+#define MAX_ICU_NR		16
+
+struct icu_chip_data {
+	int			nr_irqs;
+	unsigned int		virq_base;
+	unsigned int		cascade_irq;
+	void __iomem		*reg_status;
+	void __iomem		*reg_mask;
+	unsigned int		conf_enable;
+	unsigned int		conf_disable;
+	unsigned int		conf_mask;
+	unsigned int		clr_mfp_irq_base;
+	unsigned int		clr_mfp_hwirq;
+	struct irq_domain	*domain;
+};
+
+struct mmp_intc_conf {
+	unsigned int	conf_enable;
+	unsigned int	conf_disable;
+	unsigned int	conf_mask;
+};
+
+void __iomem *mmp_icu_base;
+static struct icu_chip_data icu_data[MAX_ICU_NR];
+static int max_icu_nr;
+
+extern void mmp2_clear_pmic_int(void);
+
+static void icu_mask_ack_irq(struct irq_data *d)
+{
+	struct irq_domain *domain = d->domain;
+	struct icu_chip_data *data = (struct icu_chip_data *)domain->host_data;
+	int hwirq;
+	u32 r;
+
+	hwirq = d->irq - data->virq_base;
+	if (data == &icu_data[0]) {
+		r = readl_relaxed(mmp_icu_base + (hwirq << 2));
+		r &= ~data->conf_mask;
+		r |= data->conf_disable;
+		writel_relaxed(r, mmp_icu_base + (hwirq << 2));
+	} else {
+#ifdef CONFIG_CPU_MMP2
+		if ((data->virq_base == data->clr_mfp_irq_base)
+			&& (hwirq == data->clr_mfp_hwirq))
+			mmp2_clear_pmic_int();
+#endif
+		r = readl_relaxed(data->reg_mask) | (1 << hwirq);
+		writel_relaxed(r, data->reg_mask);
+	}
+}
+
+static void icu_mask_irq(struct irq_data *d)
+{
+	struct irq_domain *domain = d->domain;
+	struct icu_chip_data *data = (struct icu_chip_data *)domain->host_data;
+	int hwirq;
+	u32 r;
+
+	hwirq = d->irq - data->virq_base;
+	if (data == &icu_data[0]) {
+		r = readl_relaxed(mmp_icu_base + (hwirq << 2));
+		r &= ~data->conf_mask;
+		r |= data->conf_disable;
+		writel_relaxed(r, mmp_icu_base + (hwirq << 2));
+	} else {
+		r = readl_relaxed(data->reg_mask) | (1 << hwirq);
+		writel_relaxed(r, data->reg_mask);
+	}
+}
+
+static void icu_unmask_irq(struct irq_data *d)
+{
+	struct irq_domain *domain = d->domain;
+	struct icu_chip_data *data = (struct icu_chip_data *)domain->host_data;
+	int hwirq;
+	u32 r;
+
+	hwirq = d->irq - data->virq_base;
+	if (data == &icu_data[0]) {
+		r = readl_relaxed(mmp_icu_base + (hwirq << 2));
+		r &= ~data->conf_mask;
+		r |= data->conf_enable;
+		writel_relaxed(r, mmp_icu_base + (hwirq << 2));
+	} else {
+		r = readl_relaxed(data->reg_mask) & ~(1 << hwirq);
+		writel_relaxed(r, data->reg_mask);
+	}
+}
+
+static struct irq_chip icu_irq_chip = {
+	.name		= "icu_irq",
+	.irq_mask	= icu_mask_irq,
+	.irq_mask_ack	= icu_mask_ack_irq,
+	.irq_unmask	= icu_unmask_irq,
+};
+
+static void icu_mux_irq_demux(unsigned int irq, struct irq_desc *desc)
+{
+	struct irq_domain *domain;
+	struct icu_chip_data *data;
+	int i;
+	unsigned long mask, status, n;
+
+	for (i = 1; i < max_icu_nr; i++) {
+		if (irq == icu_data[i].cascade_irq) {
+			domain = icu_data[i].domain;
+			data = (struct icu_chip_data *)domain->host_data;
+			break;
+		}
+	}
+	if (i >= max_icu_nr) {
+		pr_err("Spurious irq %d in MMP INTC\n", irq);
+		return;
+	}
+
+	mask = readl_relaxed(data->reg_mask);
+	while (1) {
+		status = readl_relaxed(data->reg_status) & ~mask;
+		if (status == 0)
+			break;
+		n = find_first_bit(&status, BITS_PER_LONG);
+		while (n < BITS_PER_LONG) {
+			generic_handle_irq(icu_data[i].virq_base + n);
+			n = find_next_bit(&status, BITS_PER_LONG, n + 1);
+		}
+	}
+}
+
+static int mmp_irq_domain_map(struct irq_domain *d, unsigned int irq,
+			      irq_hw_number_t hw)
+{
+	irq_set_chip_and_handler(irq, &icu_irq_chip, handle_level_irq);
+	set_irq_flags(irq, IRQF_VALID);
+	return 0;
+}
+
+static int mmp_irq_domain_xlate(struct irq_domain *d, struct device_node *node,
+				const u32 *intspec, unsigned int intsize,
+				unsigned long *out_hwirq,
+				unsigned int *out_type)
+{
+	*out_hwirq = intspec[0];
+	return 0;
+}
+
+const struct irq_domain_ops mmp_irq_domain_ops = {
+	.map		= mmp_irq_domain_map,
+	.xlate		= mmp_irq_domain_xlate,
+};
+
+static struct mmp_intc_conf mmp_conf = {
+	.conf_enable	= 0x51,
+	.conf_disable	= 0x0,
+	.conf_mask	= 0x7f,
+};
+
+static struct mmp_intc_conf mmp2_conf = {
+	.conf_enable	= 0x20,
+	.conf_disable	= 0x0,
+	.conf_mask	= 0x7f,
+};
+
+/* MMP (ARMv5) */
+void __init icu_init_irq(void)
+{
+	int irq;
+
+	max_icu_nr = 1;
+	mmp_icu_base = ioremap(0xd4282000, 0x1000);
+	icu_data[0].conf_enable = mmp_conf.conf_enable;
+	icu_data[0].conf_disable = mmp_conf.conf_disable;
+	icu_data[0].conf_mask = mmp_conf.conf_mask;
+	icu_data[0].nr_irqs = 64;
+	icu_data[0].virq_base = 0;
+	icu_data[0].domain = irq_domain_add_legacy(NULL, 64, 0, 0,
+						   &irq_domain_simple_ops,
+						   &icu_data[0]);
+	for (irq = 0; irq < 64; irq++) {
+		icu_mask_irq(irq_get_irq_data(irq));
+		irq_set_chip_and_handler(irq, &icu_irq_chip, handle_level_irq);
+		set_irq_flags(irq, IRQF_VALID);
+	}
+	irq_set_default_host(icu_data[0].domain);
+#ifdef CONFIG_CPU_PXA910
+	icu_irq_chip.irq_set_wake = pxa910_set_wake;
+#endif
+}
+
+/* MMP2 (ARMv7) */
+void __init mmp2_init_icu(void)
+{
+	int irq;
+
+	max_icu_nr = 8;
+	mmp_icu_base = ioremap(0xd4282000, 0x1000);
+	icu_data[0].conf_enable = mmp2_conf.conf_enable;
+	icu_data[0].conf_disable = mmp2_conf.conf_disable;
+	icu_data[0].conf_mask = mmp2_conf.conf_mask;
+	icu_data[0].nr_irqs = 64;
+	icu_data[0].virq_base = 0;
+	icu_data[0].domain = irq_domain_add_legacy(NULL, 64, 0, 0,
+						   &irq_domain_simple_ops,
+						   &icu_data[0]);
+	icu_data[1].reg_status = mmp_icu_base + 0x150;
+	icu_data[1].reg_mask = mmp_icu_base + 0x168;
+	icu_data[1].clr_mfp_irq_base = IRQ_MMP2_PMIC_BASE;
+	icu_data[1].clr_mfp_hwirq = IRQ_MMP2_PMIC - IRQ_MMP2_PMIC_BASE;
+	icu_data[1].nr_irqs = 2;
+	icu_data[1].virq_base = IRQ_MMP2_PMIC_BASE;
+	icu_data[1].domain = irq_domain_add_legacy(NULL, icu_data[1].nr_irqs,
+						   icu_data[1].virq_base, 0,
+						   &irq_domain_simple_ops,
+						   &icu_data[1]);
+	icu_data[2].reg_status = mmp_icu_base + 0x154;
+	icu_data[2].reg_mask = mmp_icu_base + 0x16c;
+	icu_data[2].nr_irqs = 2;
+	icu_data[2].virq_base = IRQ_MMP2_RTC_BASE;
+	icu_data[2].domain = irq_domain_add_legacy(NULL, icu_data[2].nr_irqs,
+						   icu_data[2].virq_base, 0,
+						   &irq_domain_simple_ops,
+						   &icu_data[2]);
+	icu_data[3].reg_status = mmp_icu_base + 0x180;
+	icu_data[3].reg_mask = mmp_icu_base + 0x17c;
+	icu_data[3].nr_irqs = 3;
+	icu_data[3].virq_base = IRQ_MMP2_KEYPAD_BASE;
+	icu_data[3].domain = irq_domain_add_legacy(NULL, icu_data[3].nr_irqs,
+						   icu_data[3].virq_base, 0,
+						   &irq_domain_simple_ops,
+						   &icu_data[3]);
+	icu_data[4].reg_status = mmp_icu_base + 0x158;
+	icu_data[4].reg_mask = mmp_icu_base + 0x170;
+	icu_data[4].nr_irqs = 5;
+	icu_data[4].virq_base = IRQ_MMP2_TWSI_BASE;
+	icu_data[4].domain = irq_domain_add_legacy(NULL, icu_data[4].nr_irqs,
+						   icu_data[4].virq_base, 0,
+						   &irq_domain_simple_ops,
+						   &icu_data[4]);
+	icu_data[5].reg_status = mmp_icu_base + 0x15c;
+	icu_data[5].reg_mask = mmp_icu_base + 0x174;
+	icu_data[5].nr_irqs = 15;
+	icu_data[5].virq_base = IRQ_MMP2_MISC_BASE;
+	icu_data[5].domain = irq_domain_add_legacy(NULL, icu_data[5].nr_irqs,
+						   icu_data[5].virq_base, 0,
+						   &irq_domain_simple_ops,
+						   &icu_data[5]);
+	icu_data[6].reg_status = mmp_icu_base + 0x160;
+	icu_data[6].reg_mask = mmp_icu_base + 0x178;
+	icu_data[6].nr_irqs = 2;
+	icu_data[6].virq_base = IRQ_MMP2_MIPI_HSI1_BASE;
+	icu_data[6].domain = irq_domain_add_legacy(NULL, icu_data[6].nr_irqs,
+						   icu_data[6].virq_base, 0,
+						   &irq_domain_simple_ops,
+						   &icu_data[6]);
+	icu_data[7].reg_status = mmp_icu_base + 0x188;
+	icu_data[7].reg_mask = mmp_icu_base + 0x184;
+	icu_data[7].nr_irqs = 2;
+	icu_data[7].virq_base = IRQ_MMP2_MIPI_HSI0_BASE;
+	icu_data[7].domain = irq_domain_add_legacy(NULL, icu_data[7].nr_irqs,
+						   icu_data[7].virq_base, 0,
+						   &irq_domain_simple_ops,
+						   &icu_data[7]);
+	for (irq = 0; irq < IRQ_MMP2_MUX_END; irq++) {
+		icu_mask_irq(irq_get_irq_data(irq));
+		switch (irq) {
+		case IRQ_MMP2_PMIC_MUX:
+		case IRQ_MMP2_RTC_MUX:
+		case IRQ_MMP2_KEYPAD_MUX:
+		case IRQ_MMP2_TWSI_MUX:
+		case IRQ_MMP2_MISC_MUX:
+		case IRQ_MMP2_MIPI_HSI1_MUX:
+		case IRQ_MMP2_MIPI_HSI0_MUX:
+			irq_set_chip(irq, &icu_irq_chip);
+			irq_set_chained_handler(irq, icu_mux_irq_demux);
+			break;
+		default:
+			irq_set_chip_and_handler(irq, &icu_irq_chip,
+						 handle_level_irq);
+			break;
+		}
+		set_irq_flags(irq, IRQF_VALID);
+	}
+	irq_set_default_host(icu_data[0].domain);
+#ifdef CONFIG_CPU_MMP2
+	icu_irq_chip.irq_set_wake = mmp2_set_wake;
+#endif
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id intc_ids[] __initconst = {
+	{ .compatible = "mrvl,mmp-intc", .data = &mmp_conf },
+	{ .compatible = "mrvl,mmp2-intc", .data = &mmp2_conf },
+	{}
+};
+
+static const struct of_device_id mmp_mux_irq_match[] __initconst = {
+	{ .compatible = "mrvl,mmp2-mux-intc" },
+	{}
+};
+
+int __init mmp2_mux_init(struct device_node *parent)
+{
+	struct device_node *node;
+	const struct of_device_id *of_id;
+	struct resource res;
+	int i, irq_base, ret, irq;
+	u32 nr_irqs, mfp_irq;
+
+	node = parent;
+	max_icu_nr = 1;
+	for (i = 1; i < MAX_ICU_NR; i++) {
+		node = of_find_matching_node(node, mmp_mux_irq_match);
+		if (!node)
+			break;
+		of_id = of_match_node(&mmp_mux_irq_match[0], node);
+		ret = of_property_read_u32(node, "mrvl,intc-nr-irqs",
+					   &nr_irqs);
+		if (ret) {
+			pr_err("Not found mrvl,intc-nr-irqs property\n");
+			ret = -EINVAL;
+			goto err;
+		}
+		ret = of_address_to_resource(node, 0, &res);
+		if (ret < 0) {
+			pr_err("Not found reg property\n");
+			ret = -EINVAL;
+			goto err;
+		}
+		icu_data[i].reg_status = mmp_icu_base + res.start;
+		ret = of_address_to_resource(node, 1, &res);
+		if (ret < 0) {
+			pr_err("Not found reg property\n");
+			ret = -EINVAL;
+			goto err;
+		}
+		icu_data[i].reg_mask = mmp_icu_base + res.start;
+		icu_data[i].cascade_irq = irq_of_parse_and_map(node, 0);
+		if (!icu_data[i].cascade_irq) {
+			ret = -EINVAL;
+			goto err;
+		}
+
+		irq_base = irq_alloc_descs(-1, 0, nr_irqs, 0);
+		if (irq_base < 0) {
+			pr_err("Failed to allocate IRQ numbers for mux intc\n");
+			ret = irq_base;
+			goto err;
+		}
+		if (!of_property_read_u32(node, "mrvl,clr-mfp-irq",
+					  &mfp_irq)) {
+			icu_data[i].clr_mfp_irq_base = irq_base;
+			icu_data[i].clr_mfp_hwirq = mfp_irq;
+		}
+		irq_set_chained_handler(icu_data[i].cascade_irq,
+					icu_mux_irq_demux);
+		icu_data[i].nr_irqs = nr_irqs;
+		icu_data[i].virq_base = irq_base;
+		icu_data[i].domain = irq_domain_add_legacy(node, nr_irqs,
+							   irq_base, 0,
+							   &mmp_irq_domain_ops,
+							   &icu_data[i]);
+		for (irq = irq_base; irq < irq_base + nr_irqs; irq++)
+			icu_mask_irq(irq_get_irq_data(irq));
+	}
+	max_icu_nr = i;
+	return 0;
+err:
+	of_node_put(node);
+	max_icu_nr = i;
+	return ret;
+}
+
+void __init mmp_dt_irq_init(void)
+{
+	struct device_node *node;
+	const struct of_device_id *of_id;
+	struct mmp_intc_conf *conf;
+	int nr_irqs, irq_base, ret, irq;
+
+	node = of_find_matching_node(NULL, intc_ids);
+	if (!node) {
+		pr_err("Failed to find interrupt controller in arch-mmp\n");
+		return;
+	}
+	of_id = of_match_node(intc_ids, node);
+	conf = of_id->data;
+
+	ret = of_property_read_u32(node, "mrvl,intc-nr-irqs", &nr_irqs);
+	if (ret) {
+		pr_err("Not found mrvl,intc-nr-irqs property\n");
+		return;
+	}
+
+	mmp_icu_base = of_iomap(node, 0);
+	if (!mmp_icu_base) {
+		pr_err("Failed to get interrupt controller register\n");
+		return;
+	}
+
+	irq_base = irq_alloc_descs(-1, 0, nr_irqs - NR_IRQS_LEGACY, 0);
+	if (irq_base < 0) {
+		pr_err("Failed to allocate IRQ numbers\n");
+		goto err;
+	} else if (irq_base != NR_IRQS_LEGACY) {
+		pr_err("ICU's irqbase should be started from 0\n");
+		goto err;
+	}
+	icu_data[0].conf_enable = conf->conf_enable;
+	icu_data[0].conf_disable = conf->conf_disable;
+	icu_data[0].conf_mask = conf->conf_mask;
+	icu_data[0].nr_irqs = nr_irqs;
+	icu_data[0].virq_base = 0;
+	icu_data[0].domain = irq_domain_add_legacy(node, nr_irqs, 0, 0,
+						   &mmp_irq_domain_ops,
+						   &icu_data[0]);
+	irq_set_default_host(icu_data[0].domain);
+	for (irq = 0; irq < nr_irqs; irq++)
+		icu_mask_irq(irq_get_irq_data(irq));
+	mmp2_mux_init(node);
+	return;
+err:
+	iounmap(mmp_icu_base);
+}
+#endif
diff --git a/arch/arm/mach-mmp/mmp-dt.c b/arch/arm/mach-mmp/mmp-dt.c
index 67075395e400..033cc31b3c72 100644
--- a/arch/arm/mach-mmp/mmp-dt.c
+++ b/arch/arm/mach-mmp/mmp-dt.c
@@ -14,14 +14,19 @@
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <asm/mach/arch.h>
+#include <asm/mach/time.h>
 #include <mach/irqs.h>
 
 #include "common.h"
 
-extern struct sys_timer pxa168_timer;
-extern void __init icu_init_irq(void);
+extern void __init mmp_dt_irq_init(void);
+extern void __init mmp_dt_init_timer(void);
 
-static const struct of_dev_auxdata mmp_auxdata_lookup[] __initconst = {
+static struct sys_timer mmp_dt_timer = {
+	.init	= mmp_dt_init_timer,
+};
+
+static const struct of_dev_auxdata pxa168_auxdata_lookup[] __initconst = {
 	OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4017000, "pxa2xx-uart.0", NULL),
 	OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4018000, "pxa2xx-uart.1", NULL),
 	OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4026000, "pxa2xx-uart.2", NULL),
@@ -32,44 +37,47 @@ static const struct of_dev_auxdata mmp_auxdata_lookup[] __initconst = {
 	{}
 };
 
-static int __init mmp_intc_add_irq_domain(struct device_node *np,
-					   struct device_node *parent)
-{
-	irq_domain_add_simple(np, 0);
-	return 0;
-}
-
-static int __init mmp_gpio_add_irq_domain(struct device_node *np,
-					   struct device_node *parent)
-{
-	irq_domain_add_simple(np, IRQ_GPIO_START);
-	return 0;
-}
-
-static const struct of_device_id mmp_irq_match[] __initconst = {
-	{ .compatible = "mrvl,mmp-intc", .data = mmp_intc_add_irq_domain, },
-	{ .compatible = "mrvl,mmp-gpio", .data = mmp_gpio_add_irq_domain, },
+static const struct of_dev_auxdata pxa910_auxdata_lookup[] __initconst = {
+	OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4017000, "pxa2xx-uart.0", NULL),
+	OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4018000, "pxa2xx-uart.1", NULL),
+	OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4036000, "pxa2xx-uart.2", NULL),
+	OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4011000, "pxa2xx-i2c.0", NULL),
+	OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4037000, "pxa2xx-i2c.1", NULL),
+	OF_DEV_AUXDATA("mrvl,mmp-gpio", 0xd4019000, "pxa-gpio", NULL),
+	OF_DEV_AUXDATA("mrvl,mmp-rtc", 0xd4010000, "sa1100-rtc", NULL),
 	{}
 };
 
-static void __init mmp_dt_init(void)
+static void __init pxa168_dt_init(void)
 {
+	of_platform_populate(NULL, of_default_bus_match_table,
+			     pxa168_auxdata_lookup, NULL);
+}
 
-	of_irq_init(mmp_irq_match);
-
+static void __init pxa910_dt_init(void)
+{
 	of_platform_populate(NULL, of_default_bus_match_table,
-			     mmp_auxdata_lookup, NULL);
+			     pxa910_auxdata_lookup, NULL);
 }
 
-static const char *pxa168_dt_board_compat[] __initdata = {
+static const char *mmp_dt_board_compat[] __initdata = {
 	"mrvl,pxa168-aspenite",
+	"mrvl,pxa910-dkb",
 	NULL,
 };
 
 DT_MACHINE_START(PXA168_DT, "Marvell PXA168 (Device Tree Support)")
 	.map_io		= mmp_map_io,
-	.init_irq	= icu_init_irq,
-	.timer		= &pxa168_timer,
-	.init_machine	= mmp_dt_init,
-	.dt_compat	= pxa168_dt_board_compat,
+	.init_irq	= mmp_dt_irq_init,
+	.timer		= &mmp_dt_timer,
+	.init_machine	= pxa168_dt_init,
+	.dt_compat	= mmp_dt_board_compat,
+MACHINE_END
+
+DT_MACHINE_START(PXA910_DT, "Marvell PXA910 (Device Tree Support)")
+	.map_io		= mmp_map_io,
+	.init_irq	= mmp_dt_irq_init,
+	.timer		= &mmp_dt_timer,
+	.init_machine	= pxa910_dt_init,
+	.dt_compat	= mmp_dt_board_compat,
 MACHINE_END
diff --git a/arch/arm/mach-mmp/mmp2-dt.c b/arch/arm/mach-mmp/mmp2-dt.c
new file mode 100644
index 000000000000..535a5ed5977b
--- /dev/null
+++ b/arch/arm/mach-mmp/mmp2-dt.c
@@ -0,0 +1,60 @@
+/*
+ *  linux/arch/arm/mach-mmp/mmp2-dt.c
+ *
+ *  Copyright (C) 2012 Marvell Technology Group Ltd.
+ *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <mach/irqs.h>
+#include <mach/regs-apbc.h>
+
+#include "common.h"
+
+extern void __init mmp_dt_irq_init(void);
+extern void __init mmp_dt_init_timer(void);
+
+static struct sys_timer mmp_dt_timer = {
+	.init	= mmp_dt_init_timer,
+};
+
+static const struct of_dev_auxdata mmp2_auxdata_lookup[] __initconst = {
+	OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4030000, "pxa2xx-uart.0", NULL),
+	OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4017000, "pxa2xx-uart.1", NULL),
+	OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4018000, "pxa2xx-uart.2", NULL),
+	OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4016000, "pxa2xx-uart.3", NULL),
+	OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4011000, "pxa2xx-i2c.0", NULL),
+	OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4025000, "pxa2xx-i2c.1", NULL),
+	OF_DEV_AUXDATA("mrvl,mmp-gpio", 0xd4019000, "pxa-gpio", NULL),
+	OF_DEV_AUXDATA("mrvl,mmp-rtc", 0xd4010000, "sa1100-rtc", NULL),
+	{}
+};
+
+static void __init mmp2_dt_init(void)
+{
+	of_platform_populate(NULL, of_default_bus_match_table,
+			     mmp2_auxdata_lookup, NULL);
+}
+
+static const char *mmp2_dt_board_compat[] __initdata = {
+	"mrvl,mmp2-brownstone",
+	NULL,
+};
+
+DT_MACHINE_START(MMP2_DT, "Marvell MMP2 (Device Tree Support)")
+	.map_io		= mmp_map_io,
+	.init_irq	= mmp_dt_irq_init,
+	.timer		= &mmp_dt_timer,
+	.init_machine	= mmp2_dt_init,
+	.dt_compat	= mmp2_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-mmp/pm-mmp2.c b/arch/arm/mach-mmp/pm-mmp2.c
new file mode 100644
index 000000000000..461a191a32d2
--- /dev/null
+++ b/arch/arm/mach-mmp/pm-mmp2.c
@@ -0,0 +1,264 @@
+/*
+ * MMP2 Power Management Routines
+ *
+ * This software program is licensed subject to the GNU General Public License
+ * (GPL).Version 2,June 1991, available at http://www.fsf.org/copyleft/gpl.html
+ *
+ * (C) Copyright 2012 Marvell International Ltd.
+ * All Rights Reserved
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/time.h>
+#include <linux/delay.h>
+#include <linux/suspend.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+#include <mach/cputype.h>
+#include <mach/addr-map.h>
+#include <mach/pm-mmp2.h>
+#include <mach/regs-icu.h>
+#include <mach/irqs.h>
+
+int mmp2_set_wake(struct irq_data *d, unsigned int on)
+{
+	int irq = d->irq;
+	struct irq_desc *desc = irq_to_desc(irq);
+	unsigned long data = 0;
+
+	if (unlikely(irq >= nr_irqs)) {
+		pr_err("IRQ nubmers are out of boundary!\n");
+		return -EINVAL;
+	}
+
+	if (on) {
+		if (desc->action)
+			desc->action->flags |= IRQF_NO_SUSPEND;
+	} else {
+		if (desc->action)
+			desc->action->flags &= ~IRQF_NO_SUSPEND;
+	}
+
+	/* enable wakeup sources */
+	switch (irq) {
+	case IRQ_MMP2_RTC:
+	case IRQ_MMP2_RTC_ALARM:
+		data = MPMU_WUCRM_PJ_WAKEUP(4) | MPMU_WUCRM_PJ_RTC_ALARM;
+		break;
+	case IRQ_MMP2_PMIC:
+		data = MPMU_WUCRM_PJ_WAKEUP(7);
+		break;
+	case IRQ_MMP2_MMC2:
+		/* mmc use WAKEUP2, same as GPIO wakeup source */
+		data = MPMU_WUCRM_PJ_WAKEUP(2);
+		break;
+	}
+	if (on) {
+		if (data) {
+			data |= __raw_readl(MPMU_WUCRM_PJ);
+			__raw_writel(data, MPMU_WUCRM_PJ);
+		}
+	} else {
+		if (data) {
+			data = ~data & __raw_readl(MPMU_WUCRM_PJ);
+			__raw_writel(data, MPMU_WUCRM_PJ);
+		}
+	}
+	return 0;
+}
+
+static void pm_scu_clk_disable(void)
+{
+	unsigned int val;
+
+	/* close AXI fabric clock gate */
+	__raw_writel(0x0, CIU_REG(0x64));
+	__raw_writel(0x0, CIU_REG(0x68));
+
+	/* close MCB master clock gate */
+	val = __raw_readl(CIU_REG(0x1c));
+	val |= 0xf0;
+	__raw_writel(val, CIU_REG(0x1c));
+
+	return ;
+}
+
+static void pm_scu_clk_enable(void)
+{
+	unsigned int val;
+
+	/* open AXI fabric clock gate */
+	__raw_writel(0x03003003, CIU_REG(0x64));
+	__raw_writel(0x00303030, CIU_REG(0x68));
+
+	/* open MCB master clock gate */
+	val = __raw_readl(CIU_REG(0x1c));
+	val &= ~(0xf0);
+	__raw_writel(val, CIU_REG(0x1c));
+
+	return ;
+}
+
+static void pm_mpmu_clk_disable(void)
+{
+	/*
+	 * disable clocks in MPMU_CGR_PJ register
+	 * except clock for APMU_PLL1, APMU_PLL1_2 and AP_26M
+	 */
+	__raw_writel(0x0000a010, MPMU_CGR_PJ);
+}
+
+static void pm_mpmu_clk_enable(void)
+{
+	unsigned int val;
+
+	__raw_writel(0xdffefffe, MPMU_CGR_PJ);
+	val = __raw_readl(MPMU_PLL2_CTRL1);
+	val |= (1 << 29);
+	__raw_writel(val, MPMU_PLL2_CTRL1);
+
+	return ;
+}
+
+void mmp2_pm_enter_lowpower_mode(int state)
+{
+	uint32_t idle_cfg, apcr;
+
+	idle_cfg = __raw_readl(APMU_PJ_IDLE_CFG);
+	apcr = __raw_readl(MPMU_PCR_PJ);
+	apcr &= ~(MPMU_PCR_PJ_SLPEN | MPMU_PCR_PJ_DDRCORSD | MPMU_PCR_PJ_APBSD
+		 | MPMU_PCR_PJ_AXISD | MPMU_PCR_PJ_VCTCXOSD | (1 << 13));
+	idle_cfg &= ~APMU_PJ_IDLE_CFG_PJ_IDLE;
+
+	switch (state) {
+	case POWER_MODE_SYS_SLEEP:
+		apcr |= MPMU_PCR_PJ_SLPEN;		/* set the SLPEN bit */
+		apcr |= MPMU_PCR_PJ_VCTCXOSD;		/* set VCTCXOSD */
+		/* fall through */
+	case POWER_MODE_CHIP_SLEEP:
+		apcr |= MPMU_PCR_PJ_SLPEN;
+		/* fall through */
+	case POWER_MODE_APPS_SLEEP:
+		apcr |= MPMU_PCR_PJ_APBSD;		/* set APBSD */
+		/* fall through */
+	case POWER_MODE_APPS_IDLE:
+		apcr |= MPMU_PCR_PJ_AXISD;		/* set AXISDD bit */
+		apcr |= MPMU_PCR_PJ_DDRCORSD;		/* set DDRCORSD bit */
+		idle_cfg |= APMU_PJ_IDLE_CFG_PJ_PWRDWN;	/* PJ power down */
+		apcr |= MPMU_PCR_PJ_SPSD;
+		/* fall through */
+	case POWER_MODE_CORE_EXTIDLE:
+		idle_cfg |= APMU_PJ_IDLE_CFG_PJ_IDLE;	/* set the IDLE bit */
+		idle_cfg &= ~APMU_PJ_IDLE_CFG_ISO_MODE_CNTRL_MASK;
+		idle_cfg |= APMU_PJ_IDLE_CFG_PWR_SW(3)
+			| APMU_PJ_IDLE_CFG_L2_PWR_SW;
+		break;
+	case POWER_MODE_CORE_INTIDLE:
+		apcr &= ~MPMU_PCR_PJ_SPSD;
+		break;
+	}
+
+	/* set reserve bits */
+	apcr |= (1 << 30) | (1 << 25);
+
+	/* finally write the registers back */
+	__raw_writel(idle_cfg, APMU_PJ_IDLE_CFG);
+	__raw_writel(apcr, MPMU_PCR_PJ);	/* 0xfe086000 */
+}
+
+static int mmp2_pm_enter(suspend_state_t state)
+{
+	int temp;
+
+	temp = __raw_readl(MMP2_ICU_INT4_MASK);
+	if (temp & (1 << 1)) {
+		printk(KERN_ERR "%s: PMIC interrupt is handling\n", __func__);
+		return -EAGAIN;
+	}
+
+	temp = __raw_readl(APMU_SRAM_PWR_DWN);
+	temp |= ((1 << 19) | (1 << 18));
+	__raw_writel(temp, APMU_SRAM_PWR_DWN);
+	pm_mpmu_clk_disable();
+	pm_scu_clk_disable();
+
+	printk(KERN_INFO "%s: before suspend\n", __func__);
+	cpu_do_idle();
+	printk(KERN_INFO "%s: after suspend\n", __func__);
+
+	pm_mpmu_clk_enable();		/* enable clocks in MPMU */
+	pm_scu_clk_enable();		/* enable clocks in SCU */
+
+	return 0;
+}
+
+/*
+ * Called after processes are frozen, but before we shut down devices.
+ */
+static int mmp2_pm_prepare(void)
+{
+	mmp2_pm_enter_lowpower_mode(POWER_MODE_SYS_SLEEP);
+
+	return 0;
+}
+
+/*
+ * Called after devices are re-setup, but before processes are thawed.
+ */
+static void mmp2_pm_finish(void)
+{
+	mmp2_pm_enter_lowpower_mode(POWER_MODE_CORE_INTIDLE);
+}
+
+static int mmp2_pm_valid(suspend_state_t state)
+{
+	return ((state == PM_SUSPEND_STANDBY) || (state == PM_SUSPEND_MEM));
+}
+
+/*
+ * Set to PM_DISK_FIRMWARE so we can quickly veto suspend-to-disk.
+ */
+static const struct platform_suspend_ops mmp2_pm_ops = {
+	.valid		= mmp2_pm_valid,
+	.prepare	= mmp2_pm_prepare,
+	.enter		= mmp2_pm_enter,
+	.finish		= mmp2_pm_finish,
+};
+
+static int __init mmp2_pm_init(void)
+{
+	uint32_t apcr;
+
+	if (!cpu_is_mmp2())
+		return -EIO;
+
+	suspend_set_ops(&mmp2_pm_ops);
+
+	/*
+	 * Set bit 0, Slow clock Select 32K clock input instead of VCXO
+	 * VCXO is chosen by default, which would be disabled in suspend
+	 */
+	__raw_writel(0x5, MPMU_SCCR);
+
+	/*
+	 * Clear bit 23 of CIU_CPU_CONF
+	 * direct PJ4 to DDR access through Memory Controller slow queue
+	 * fast queue has issue and cause lcd will flick
+	 */
+	__raw_writel(__raw_readl(CIU_REG(0x8)) & ~(0x1 << 23), CIU_REG(0x8));
+
+	/* Clear default low power control bit */
+	apcr = __raw_readl(MPMU_PCR_PJ);
+	apcr &= ~(MPMU_PCR_PJ_SLPEN | MPMU_PCR_PJ_DDRCORSD
+			| MPMU_PCR_PJ_APBSD | MPMU_PCR_PJ_AXISD | 1 << 13);
+	__raw_writel(apcr, MPMU_PCR_PJ);
+
+	return 0;
+}
+
+late_initcall(mmp2_pm_init);
diff --git a/arch/arm/mach-mmp/pm-pxa910.c b/arch/arm/mach-mmp/pm-pxa910.c
new file mode 100644
index 000000000000..48981ca801a5
--- /dev/null
+++ b/arch/arm/mach-mmp/pm-pxa910.c
@@ -0,0 +1,285 @@
+/*
+ * PXA910 Power Management Routines
+ *
+ * This software program is licensed subject to the GNU General Public License
+ * (GPL).Version 2,June 1991, available at http://www.fsf.org/copyleft/gpl.html
+ *
+ * (C) Copyright 2009 Marvell International Ltd.
+ * All Rights Reserved
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/time.h>
+#include <linux/delay.h>
+#include <linux/suspend.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+#include <mach/cputype.h>
+#include <mach/addr-map.h>
+#include <mach/pm-pxa910.h>
+#include <mach/regs-icu.h>
+#include <mach/irqs.h>
+
+int pxa910_set_wake(struct irq_data *data, unsigned int on)
+{
+	int irq = data->irq;
+	struct irq_desc *desc = irq_to_desc(data->irq);
+	uint32_t awucrm = 0, apcr = 0;
+
+	if (unlikely(irq >= nr_irqs)) {
+		pr_err("IRQ nubmers are out of boundary!\n");
+		return -EINVAL;
+	}
+
+	if (on) {
+		if (desc->action)
+			desc->action->flags |= IRQF_NO_SUSPEND;
+	} else {
+		if (desc->action)
+			desc->action->flags &= ~IRQF_NO_SUSPEND;
+	}
+
+	/* setting wakeup sources */
+	switch (irq) {
+	/* wakeup line 2 */
+	case IRQ_PXA910_AP_GPIO:
+		awucrm = MPMU_AWUCRM_WAKEUP(2);
+		apcr |= MPMU_APCR_SLPWP2;
+		break;
+	/* wakeup line 3 */
+	case IRQ_PXA910_KEYPAD:
+		awucrm = MPMU_AWUCRM_WAKEUP(3) | MPMU_AWUCRM_KEYPRESS;
+		apcr |= MPMU_APCR_SLPWP3;
+		break;
+	case IRQ_PXA910_ROTARY:
+		awucrm = MPMU_AWUCRM_WAKEUP(3) | MPMU_AWUCRM_NEWROTARY;
+		apcr |= MPMU_APCR_SLPWP3;
+		break;
+	case IRQ_PXA910_TRACKBALL:
+		awucrm = MPMU_AWUCRM_WAKEUP(3) | MPMU_AWUCRM_TRACKBALL;
+		apcr |= MPMU_APCR_SLPWP3;
+		break;
+	/* wakeup line 4 */
+	case IRQ_PXA910_AP1_TIMER1:
+		awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP1_TIMER_1;
+		apcr |= MPMU_APCR_SLPWP4;
+		break;
+	case IRQ_PXA910_AP1_TIMER2:
+		awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP1_TIMER_2;
+		apcr |= MPMU_APCR_SLPWP4;
+		break;
+	case IRQ_PXA910_AP1_TIMER3:
+		awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP1_TIMER_3;
+		apcr |= MPMU_APCR_SLPWP4;
+		break;
+	case IRQ_PXA910_AP2_TIMER1:
+		awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP2_TIMER_1;
+		apcr |= MPMU_APCR_SLPWP4;
+		break;
+	case IRQ_PXA910_AP2_TIMER2:
+		awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP2_TIMER_2;
+		apcr |= MPMU_APCR_SLPWP4;
+		break;
+	case IRQ_PXA910_AP2_TIMER3:
+		awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP2_TIMER_3;
+		apcr |= MPMU_APCR_SLPWP4;
+		break;
+	case IRQ_PXA910_RTC_ALARM:
+		awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_RTC_ALARM;
+		apcr |= MPMU_APCR_SLPWP4;
+		break;
+	/* wakeup line 5 */
+	case IRQ_PXA910_USB1:
+	case IRQ_PXA910_USB2:
+		awucrm = MPMU_AWUCRM_WAKEUP(5);
+		apcr |= MPMU_APCR_SLPWP5;
+		break;
+	/* wakeup line 6 */
+	case IRQ_PXA910_MMC:
+		awucrm = MPMU_AWUCRM_WAKEUP(6)
+			| MPMU_AWUCRM_SDH1
+			| MPMU_AWUCRM_SDH2;
+		apcr |= MPMU_APCR_SLPWP6;
+		break;
+	/* wakeup line 7 */
+	case IRQ_PXA910_PMIC_INT:
+		awucrm = MPMU_AWUCRM_WAKEUP(7);
+		apcr |= MPMU_APCR_SLPWP7;
+		break;
+	default:
+		if (irq >= IRQ_GPIO_START && irq < IRQ_BOARD_START) {
+			awucrm = MPMU_AWUCRM_WAKEUP(2);
+			apcr |= MPMU_APCR_SLPWP2;
+		} else
+			printk(KERN_ERR "Error: no defined wake up source irq: %d\n",
+				irq);
+	}
+
+	if (on) {
+		if (awucrm) {
+			awucrm |= __raw_readl(MPMU_AWUCRM);
+			__raw_writel(awucrm, MPMU_AWUCRM);
+		}
+		if (apcr) {
+			apcr = ~apcr & __raw_readl(MPMU_APCR);
+			__raw_writel(apcr, MPMU_APCR);
+		}
+	} else {
+		if (awucrm) {
+			awucrm = ~awucrm & __raw_readl(MPMU_AWUCRM);
+			__raw_writel(awucrm, MPMU_AWUCRM);
+		}
+		if (apcr) {
+			apcr |= __raw_readl(MPMU_APCR);
+			__raw_writel(apcr, MPMU_APCR);
+		}
+	}
+	return 0;
+}
+
+void pxa910_pm_enter_lowpower_mode(int state)
+{
+	uint32_t idle_cfg, apcr;
+
+	idle_cfg = __raw_readl(APMU_MOH_IDLE_CFG);
+	apcr = __raw_readl(MPMU_APCR);
+
+	apcr &= ~(MPMU_APCR_DDRCORSD | MPMU_APCR_APBSD | MPMU_APCR_AXISD
+		| MPMU_APCR_VCTCXOSD | MPMU_APCR_STBYEN);
+	idle_cfg &= ~(APMU_MOH_IDLE_CFG_MOH_IDLE
+		| APMU_MOH_IDLE_CFG_MOH_PWRDWN);
+
+	switch (state) {
+	case POWER_MODE_UDR:
+		/* only shutdown APB in UDR */
+		apcr |= MPMU_APCR_STBYEN | MPMU_APCR_APBSD;
+		/* fall through */
+	case POWER_MODE_SYS_SLEEP:
+		apcr |= MPMU_APCR_SLPEN;		/* set the SLPEN bit */
+		apcr |= MPMU_APCR_VCTCXOSD;		/* set VCTCXOSD */
+		/* fall through */
+	case POWER_MODE_APPS_SLEEP:
+		apcr |= MPMU_APCR_DDRCORSD;		/* set DDRCORSD */
+		/* fall through */
+	case POWER_MODE_APPS_IDLE:
+		apcr |= MPMU_APCR_AXISD;		/* set AXISDD bit */
+		/* fall through */
+	case POWER_MODE_CORE_EXTIDLE:
+		idle_cfg |= APMU_MOH_IDLE_CFG_MOH_IDLE;
+		idle_cfg |= APMU_MOH_IDLE_CFG_MOH_PWRDWN;
+		idle_cfg |= APMU_MOH_IDLE_CFG_MOH_PWR_SW(3)
+			| APMU_MOH_IDLE_CFG_MOH_L2_PWR_SW(3);
+		/* fall through */
+	case POWER_MODE_CORE_INTIDLE:
+		break;
+	}
+
+	/* program the memory controller hardware sleep type and auto wakeup */
+	idle_cfg |= APMU_MOH_IDLE_CFG_MOH_DIS_MC_SW_REQ;
+	idle_cfg |= APMU_MOH_IDLE_CFG_MOH_MC_WAKE_EN;
+	__raw_writel(0x0, APMU_MC_HW_SLP_TYPE);		/* auto refresh */
+
+	/* set DSPSD, DTCMSD, BBSD, MSASLPEN */
+	apcr |= MPMU_APCR_DSPSD | MPMU_APCR_DTCMSD | MPMU_APCR_BBSD
+		| MPMU_APCR_MSASLPEN;
+
+	/*always set SLEPEN bit mainly for MSA*/
+	apcr |= MPMU_APCR_SLPEN;
+
+	/* finally write the registers back */
+	__raw_writel(idle_cfg, APMU_MOH_IDLE_CFG);
+	__raw_writel(apcr, MPMU_APCR);
+
+}
+
+static int pxa910_pm_enter(suspend_state_t state)
+{
+	unsigned int idle_cfg, reg = 0;
+
+	/*pmic thread not completed,exit;otherwise system can't be waked up*/
+	reg = __raw_readl(ICU_INT_CONF(IRQ_PXA910_PMIC_INT));
+	if ((reg & 0x3) == 0)
+		return -EAGAIN;
+
+	idle_cfg = __raw_readl(APMU_MOH_IDLE_CFG);
+	idle_cfg |= APMU_MOH_IDLE_CFG_MOH_PWRDWN
+		| APMU_MOH_IDLE_CFG_MOH_SRAM_PWRDWN;
+	__raw_writel(idle_cfg, APMU_MOH_IDLE_CFG);
+
+	/* disable L2 */
+	outer_disable();
+	/* wait for l2 idle */
+	while (!(readl(CIU_REG(0x8)) & (1 << 16)))
+		udelay(1);
+
+	cpu_do_idle();
+
+	/* enable L2 */
+	outer_resume();
+	/* wait for l2 idle */
+	while (!(readl(CIU_REG(0x8)) & (1 << 16)))
+		udelay(1);
+
+	idle_cfg = __raw_readl(APMU_MOH_IDLE_CFG);
+	idle_cfg &= ~(APMU_MOH_IDLE_CFG_MOH_PWRDWN
+		| APMU_MOH_IDLE_CFG_MOH_SRAM_PWRDWN);
+	__raw_writel(idle_cfg, APMU_MOH_IDLE_CFG);
+
+	return 0;
+}
+
+/*
+ * Called after processes are frozen, but before we shut down devices.
+ */
+static int pxa910_pm_prepare(void)
+{
+	pxa910_pm_enter_lowpower_mode(POWER_MODE_UDR);
+	return 0;
+}
+
+/*
+ * Called after devices are re-setup, but before processes are thawed.
+ */
+static void pxa910_pm_finish(void)
+{
+	pxa910_pm_enter_lowpower_mode(POWER_MODE_CORE_INTIDLE);
+}
+
+static int pxa910_pm_valid(suspend_state_t state)
+{
+	return ((state == PM_SUSPEND_STANDBY) || (state == PM_SUSPEND_MEM));
+}
+
+static const struct platform_suspend_ops pxa910_pm_ops = {
+	.valid		= pxa910_pm_valid,
+	.prepare	= pxa910_pm_prepare,
+	.enter		= pxa910_pm_enter,
+	.finish		= pxa910_pm_finish,
+};
+
+static int __init pxa910_pm_init(void)
+{
+	uint32_t awucrm = 0;
+
+	if (!cpu_is_pxa910())
+		return -EIO;
+
+	suspend_set_ops(&pxa910_pm_ops);
+
+	/* Set the following bits for MMP3 playback with VCTXO on */
+	__raw_writel(__raw_readl(APMU_SQU_CLK_GATE_CTRL) | (1 << 30),
+		APMU_SQU_CLK_GATE_CTRL);
+	__raw_writel(__raw_readl(MPMU_FCCR) | (1 << 28), MPMU_FCCR);
+
+	awucrm |= MPMU_AWUCRM_AP_ASYNC_INT | MPMU_AWUCRM_AP_FULL_IDLE;
+	__raw_writel(awucrm, MPMU_AWUCRM);
+
+	return 0;
+}
+
+late_initcall(pxa910_pm_init);
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
index b24d2c32cba9..62d787c34475 100644
--- a/arch/arm/mach-mmp/pxa168.c
+++ b/arch/arm/mach-mmp/pxa168.c
@@ -14,6 +14,7 @@
 #include <linux/io.h>
 #include <linux/clk.h>
 #include <linux/platform_device.h>
+#include <linux/platform_data/mv_usb.h>
 
 #include <asm/mach/time.h>
 #include <asm/system_misc.h>
@@ -27,6 +28,7 @@
 #include <mach/mfp.h>
 #include <linux/dma-mapping.h>
 #include <mach/pxa168.h>
+#include <mach/regs-usb.h>
 
 #include "common.h"
 #include "clock.h"
@@ -93,7 +95,7 @@ static struct clk_lookup pxa168_clkregs[] = {
 	INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL),
 	INIT_CLKREG(&clk_keypad, "pxa27x-keypad", NULL),
 	INIT_CLKREG(&clk_eth, "pxa168-eth", "MFUCLK"),
-	INIT_CLKREG(&clk_usb, "pxa168-ehci", "PXA168-USBCLK"),
+	INIT_CLKREG(&clk_usb, NULL, "PXA168-USBCLK"),
 	INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL),
 };
 
@@ -184,17 +186,17 @@ struct platform_device pxa168_device_gpio = {
 struct resource pxa168_usb_host_resources[] = {
 	/* USB Host conroller register base */
 	[0] = {
-		.start	= 0xd4209000,
-		.end	= 0xd4209000 + 0x200,
+		.start	= PXA168_U2H_REGBASE + U2x_CAPREGS_OFFSET,
+		.end	= PXA168_U2H_REGBASE + USB_REG_RANGE,
 		.flags	= IORESOURCE_MEM,
-		.name	= "pxa168-usb-host",
+		.name	= "capregs",
 	},
 	/* USB PHY register base */
 	[1] = {
-		.start	= 0xd4206000,
-		.end	= 0xd4206000 + 0xff,
+		.start	= PXA168_U2H_PHYBASE,
+		.end	= PXA168_U2H_PHYBASE + USB_PHY_RANGE,
 		.flags	= IORESOURCE_MEM,
-		.name	= "pxa168-usb-phy",
+		.name	= "phyregs",
 	},
 	[2] = {
 		.start	= IRQ_PXA168_USB2,
@@ -205,7 +207,7 @@ struct resource pxa168_usb_host_resources[] = {
 
 static u64 pxa168_usb_host_dmamask = DMA_BIT_MASK(32);
 struct platform_device pxa168_device_usb_host = {
-	.name = "pxa168-ehci",
+	.name = "pxa-sph",
 	.id   = -1,
 	.dev  = {
 		.dma_mask = &pxa168_usb_host_dmamask,
@@ -216,7 +218,7 @@ struct platform_device pxa168_device_usb_host = {
 	.resource      = pxa168_usb_host_resources,
 };
 
-int __init pxa168_add_usb_host(struct pxa168_usb_pdata *pdata)
+int __init pxa168_add_usb_host(struct mv_usb_platform_data *pdata)
 {
 	pxa168_device_usb_host.dev.platform_data = pdata;
 	return platform_device_register(&pxa168_device_usb_host);
diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c
index 43f8bcc29b67..6da52e9f2bdc 100644
--- a/arch/arm/mach-mmp/pxa910.c
+++ b/arch/arm/mach-mmp/pxa910.c
@@ -109,7 +109,7 @@ static struct clk_lookup pxa910_clkregs[] = {
 	INIT_CLKREG(&clk_pwm4, "pxa910-pwm.3", NULL),
 	INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
 	INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL),
-	INIT_CLKREG(&clk_u2o, "pxa-u2o", "U2OCLK"),
+	INIT_CLKREG(&clk_u2o, NULL, "U2OCLK"),
 	INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL),
 };
 
diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c
index 71fc4ee4602c..936447c70977 100644
--- a/arch/arm/mach-mmp/time.c
+++ b/arch/arm/mach-mmp/time.c
@@ -25,6 +25,9 @@
 
 #include <linux/io.h>
 #include <linux/irq.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 
 #include <asm/sched_clock.h>
 #include <mach/addr-map.h>
@@ -41,6 +44,8 @@
 #define MAX_DELTA		(0xfffffffe)
 #define MIN_DELTA		(16)
 
+static void __iomem *mmp_timer_base = TIMERS_VIRT_BASE;
+
 /*
  * FIXME: the timer needs some delay to stablize the counter capture
  */
@@ -48,12 +53,12 @@ static inline uint32_t timer_read(void)
 {
 	int delay = 100;
 
-	__raw_writel(1, TIMERS_VIRT_BASE + TMR_CVWR(1));
+	__raw_writel(1, mmp_timer_base + TMR_CVWR(1));
 
 	while (delay--)
 		cpu_relax();
 
-	return __raw_readl(TIMERS_VIRT_BASE + TMR_CVWR(1));
+	return __raw_readl(mmp_timer_base + TMR_CVWR(1));
 }
 
 static u32 notrace mmp_read_sched_clock(void)
@@ -68,12 +73,12 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id)
 	/*
 	 * Clear pending interrupt status.
 	 */
-	__raw_writel(0x01, TIMERS_VIRT_BASE + TMR_ICR(0));
+	__raw_writel(0x01, mmp_timer_base + TMR_ICR(0));
 
 	/*
 	 * Disable timer 0.
 	 */
-	__raw_writel(0x02, TIMERS_VIRT_BASE + TMR_CER);
+	__raw_writel(0x02, mmp_timer_base + TMR_CER);
 
 	c->event_handler(c);
 
@@ -90,23 +95,23 @@ static int timer_set_next_event(unsigned long delta,
 	/*
 	 * Disable timer 0.
 	 */
-	__raw_writel(0x02, TIMERS_VIRT_BASE + TMR_CER);
+	__raw_writel(0x02, mmp_timer_base + TMR_CER);
 
 	/*
 	 * Clear and enable timer match 0 interrupt.
 	 */
-	__raw_writel(0x01, TIMERS_VIRT_BASE + TMR_ICR(0));
-	__raw_writel(0x01, TIMERS_VIRT_BASE + TMR_IER(0));
+	__raw_writel(0x01, mmp_timer_base + TMR_ICR(0));
+	__raw_writel(0x01, mmp_timer_base + TMR_IER(0));
 
 	/*
 	 * Setup new clockevent timer value.
 	 */
-	__raw_writel(delta - 1, TIMERS_VIRT_BASE + TMR_TN_MM(0, 0));
+	__raw_writel(delta - 1, mmp_timer_base + TMR_TN_MM(0, 0));
 
 	/*
 	 * Enable timer 0.
 	 */
-	__raw_writel(0x03, TIMERS_VIRT_BASE + TMR_CER);
+	__raw_writel(0x03, mmp_timer_base + TMR_CER);
 
 	local_irq_restore(flags);
 
@@ -124,7 +129,7 @@ static void timer_set_mode(enum clock_event_mode mode,
 	case CLOCK_EVT_MODE_UNUSED:
 	case CLOCK_EVT_MODE_SHUTDOWN:
 		/* disable the matching interrupt */
-		__raw_writel(0x00, TIMERS_VIRT_BASE + TMR_IER(0));
+		__raw_writel(0x00, mmp_timer_base + TMR_IER(0));
 		break;
 	case CLOCK_EVT_MODE_RESUME:
 	case CLOCK_EVT_MODE_PERIODIC:
@@ -157,27 +162,27 @@ static struct clocksource cksrc = {
 
 static void __init timer_config(void)
 {
-	uint32_t ccr = __raw_readl(TIMERS_VIRT_BASE + TMR_CCR);
+	uint32_t ccr = __raw_readl(mmp_timer_base + TMR_CCR);
 
-	__raw_writel(0x0, TIMERS_VIRT_BASE + TMR_CER); /* disable */
+	__raw_writel(0x0, mmp_timer_base + TMR_CER); /* disable */
 
 	ccr &= (cpu_is_mmp2()) ? (TMR_CCR_CS_0(0) | TMR_CCR_CS_1(0)) :
 		(TMR_CCR_CS_0(3) | TMR_CCR_CS_1(3));
-	__raw_writel(ccr, TIMERS_VIRT_BASE + TMR_CCR);
+	__raw_writel(ccr, mmp_timer_base + TMR_CCR);
 
 	/* set timer 0 to periodic mode, and timer 1 to free-running mode */
-	__raw_writel(0x2, TIMERS_VIRT_BASE + TMR_CMR);
+	__raw_writel(0x2, mmp_timer_base + TMR_CMR);
 
-	__raw_writel(0x1, TIMERS_VIRT_BASE + TMR_PLCR(0)); /* periodic */
-	__raw_writel(0x7, TIMERS_VIRT_BASE + TMR_ICR(0));  /* clear status */
-	__raw_writel(0x0, TIMERS_VIRT_BASE + TMR_IER(0));
+	__raw_writel(0x1, mmp_timer_base + TMR_PLCR(0)); /* periodic */
+	__raw_writel(0x7, mmp_timer_base + TMR_ICR(0));  /* clear status */
+	__raw_writel(0x0, mmp_timer_base + TMR_IER(0));
 
-	__raw_writel(0x0, TIMERS_VIRT_BASE + TMR_PLCR(1)); /* free-running */
-	__raw_writel(0x7, TIMERS_VIRT_BASE + TMR_ICR(1));  /* clear status */
-	__raw_writel(0x0, TIMERS_VIRT_BASE + TMR_IER(1));
+	__raw_writel(0x0, mmp_timer_base + TMR_PLCR(1)); /* free-running */
+	__raw_writel(0x7, mmp_timer_base + TMR_ICR(1));  /* clear status */
+	__raw_writel(0x0, mmp_timer_base + TMR_IER(1));
 
 	/* enable timer 1 counter */
-	__raw_writel(0x2, TIMERS_VIRT_BASE + TMR_CER);
+	__raw_writel(0x2, mmp_timer_base + TMR_CER);
 }
 
 static struct irqaction timer_irq = {
@@ -203,3 +208,37 @@ void __init timer_init(int irq)
 	clocksource_register_hz(&cksrc, CLOCK_TICK_RATE);
 	clockevents_register_device(&ckevt);
 }
+
+#ifdef CONFIG_OF
+static struct of_device_id mmp_timer_dt_ids[] = {
+	{ .compatible = "mrvl,mmp-timer", },
+	{}
+};
+
+void __init mmp_dt_init_timer(void)
+{
+	struct device_node *np;
+	int irq, ret;
+
+	np = of_find_matching_node(NULL, mmp_timer_dt_ids);
+	if (!np) {
+		ret = -ENODEV;
+		goto out;
+	}
+
+	irq = irq_of_parse_and_map(np, 0);
+	if (!irq) {
+		ret = -EINVAL;
+		goto out;
+	}
+	mmp_timer_base = of_iomap(np, 0);
+	if (!mmp_timer_base) {
+		ret = -ENOMEM;
+		goto out;
+	}
+	timer_init(irq);
+	return;
+out:
+	pr_err("Failed to get timer from device tree with error:%d\n", ret);
+}
+#endif
diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c
index 3fc9ed21f97d..7a7de2b12a62 100644
--- a/arch/arm/mach-mmp/ttc_dkb.c
+++ b/arch/arm/mach-mmp/ttc_dkb.c
@@ -17,6 +17,8 @@
 #include <linux/interrupt.h>
 #include <linux/i2c/pca953x.h>
 #include <linux/gpio.h>
+#include <linux/mfd/88pm860x.h>
+#include <linux/platform_data/mv_usb.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -25,6 +27,7 @@
 #include <mach/mfp-pxa910.h>
 #include <mach/pxa910.h>
 #include <mach/irqs.h>
+#include <mach/regs-usb.h>
 
 #include "common.h"
 
@@ -135,8 +138,18 @@ static struct pca953x_platform_data max7312_data[] = {
 	},
 };
 
+static struct pm860x_platform_data ttc_dkb_pm8607_info = {
+	.irq_base       = IRQ_BOARD_START,
+};
+
 static struct i2c_board_info ttc_dkb_i2c_info[] = {
 	{
+		.type           = "88PM860x",
+		.addr           = 0x34,
+		.platform_data  = &ttc_dkb_pm8607_info,
+		.irq            = IRQ_PXA910_PMIC_INT,
+	},
+	{
 		.type		= "max7312",
 		.addr		= 0x23,
 		.irq		= MMP_GPIO_TO_IRQ(80),
@@ -144,6 +157,26 @@ static struct i2c_board_info ttc_dkb_i2c_info[] = {
 	},
 };
 
+#ifdef CONFIG_USB_SUPPORT
+#if defined(CONFIG_USB_MV_UDC) || defined(CONFIG_USB_EHCI_MV_U2O)
+
+static char *pxa910_usb_clock_name[] = {
+	[0] = "U2OCLK",
+};
+
+static struct mv_usb_platform_data ttc_usb_pdata = {
+	.clknum		= 1,
+	.clkname	= pxa910_usb_clock_name,
+	.vbus		= NULL,
+	.mode		= MV_USB_MODE_OTG,
+	.otg_force_a_bus_req = 1,
+	.phy_init	= pxa_usb_phy_init,
+	.phy_deinit	= pxa_usb_phy_deinit,
+	.set_vbus	= NULL,
+};
+#endif
+#endif
+
 static void __init ttc_dkb_init(void)
 {
 	mfp_config(ARRAY_AND_SIZE(ttc_dkb_pin_config));
@@ -154,6 +187,21 @@ static void __init ttc_dkb_init(void)
 	/* off-chip devices */
 	pxa910_add_twsi(0, NULL, ARRAY_AND_SIZE(ttc_dkb_i2c_info));
 	platform_add_devices(ARRAY_AND_SIZE(ttc_dkb_devices));
+
+#ifdef CONFIG_USB_MV_UDC
+	pxa168_device_u2o.dev.platform_data = &ttc_usb_pdata;
+	platform_device_register(&pxa168_device_u2o);
+#endif
+
+#ifdef CONFIG_USB_EHCI_MV_U2O
+	pxa168_device_u2oehci.dev.platform_data = &ttc_usb_pdata;
+	platform_device_register(&pxa168_device_u2oehci);
+#endif
+
+#ifdef CONFIG_USB_MV_OTG
+	pxa168_device_u2ootg.dev.platform_data = &ttc_usb_pdata;
+	platform_device_register(&pxa168_device_u2ootg);
+#endif
 }
 
 MACHINE_START(TTC_DKB, "PXA910-based TTC_DKB Development Platform")
diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c
index 3698a370d636..4fa3e99d9a62 100644
--- a/arch/arm/mach-msm/board-halibut.c
+++ b/arch/arm/mach-msm/board-halibut.c
@@ -86,9 +86,6 @@ static void __init halibut_init(void)
 static void __init halibut_fixup(struct tag *tags, char **cmdline,
 				 struct meminfo *mi)
 {
-	mi->nr_banks=1;
-	mi->bank[0].start = PHYS_OFFSET;
-	mi->bank[0].size = (101*1024*1024);
 }
 
 static void __init halibut_map_io(void)
@@ -97,6 +94,11 @@ static void __init halibut_map_io(void)
 	msm_clock_init(msm_clocks_7x01a, msm_num_clocks_7x01a);
 }
 
+static void __init halibut_init_late(void)
+{
+	smd_debugfs_init();
+}
+
 MACHINE_START(HALIBUT, "Halibut Board (QCT SURF7200A)")
 	.atag_offset	= 0x100,
 	.fixup		= halibut_fixup,
@@ -104,5 +106,6 @@ MACHINE_START(HALIBUT, "Halibut Board (QCT SURF7200A)")
 	.init_early	= halibut_init_early,
 	.init_irq	= halibut_init_irq,
 	.init_machine	= halibut_init,
+	.init_late	= halibut_init_late,
 	.timer		= &msm_timer,
 MACHINE_END
diff --git a/arch/arm/mach-msm/board-mahimahi.c b/arch/arm/mach-msm/board-mahimahi.c
index 5a4882fc6f7a..cf1f89a5dc62 100644
--- a/arch/arm/mach-msm/board-mahimahi.c
+++ b/arch/arm/mach-msm/board-mahimahi.c
@@ -71,6 +71,11 @@ static void __init mahimahi_map_io(void)
 	msm_clock_init();
 }
 
+static void __init mahimahi_init_late(void)
+{
+	smd_debugfs_init();
+}
+
 extern struct sys_timer msm_timer;
 
 MACHINE_START(MAHIMAHI, "mahimahi")
@@ -79,5 +84,6 @@ MACHINE_START(MAHIMAHI, "mahimahi")
 	.map_io		= mahimahi_map_io,
 	.init_irq	= msm_init_irq,
 	.init_machine	= mahimahi_init,
+	.init_late	= mahimahi_init_late,
 	.timer		= &msm_timer,
 MACHINE_END
diff --git a/arch/arm/mach-msm/board-msm7x27.c b/arch/arm/mach-msm/board-msm7x27.c
index 6d84ee740df4..451ab1d43c92 100644
--- a/arch/arm/mach-msm/board-msm7x27.c
+++ b/arch/arm/mach-msm/board-msm7x27.c
@@ -128,11 +128,17 @@ static void __init msm7x2x_map_io(void)
 #endif
 }
 
+static void __init msm7x2x_init_late(void)
+{
+	smd_debugfs_init();
+}
+
 MACHINE_START(MSM7X27_SURF, "QCT MSM7x27 SURF")
 	.atag_offset	= 0x100,
 	.map_io		= msm7x2x_map_io,
 	.init_irq	= msm7x2x_init_irq,
 	.init_machine	= msm7x2x_init,
+	.init_late	= msm7x2x_init_late,
 	.timer		= &msm_timer,
 MACHINE_END
 
@@ -141,6 +147,7 @@ MACHINE_START(MSM7X27_FFA, "QCT MSM7x27 FFA")
 	.map_io		= msm7x2x_map_io,
 	.init_irq	= msm7x2x_init_irq,
 	.init_machine	= msm7x2x_init,
+	.init_late	= msm7x2x_init_late,
 	.timer		= &msm_timer,
 MACHINE_END
 
@@ -149,6 +156,7 @@ MACHINE_START(MSM7X25_SURF, "QCT MSM7x25 SURF")
 	.map_io		= msm7x2x_map_io,
 	.init_irq	= msm7x2x_init_irq,
 	.init_machine	= msm7x2x_init,
+	.init_late	= msm7x2x_init_late,
 	.timer		= &msm_timer,
 MACHINE_END
 
@@ -157,5 +165,6 @@ MACHINE_START(MSM7X25_FFA, "QCT MSM7x25 FFA")
 	.map_io		= msm7x2x_map_io,
 	.init_irq	= msm7x2x_init_irq,
 	.init_machine	= msm7x2x_init,
+	.init_late	= msm7x2x_init_late,
 	.timer		= &msm_timer,
 MACHINE_END
diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c
index db81ed531031..a5001378135d 100644
--- a/arch/arm/mach-msm/board-msm7x30.c
+++ b/arch/arm/mach-msm/board-msm7x30.c
@@ -17,7 +17,6 @@
 #include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/irq.h>
-#include <linux/gpio.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/io.h>
@@ -120,6 +119,11 @@ static void __init msm7x30_map_io(void)
 	msm_clock_init(msm_clocks_7x30, msm_num_clocks_7x30);
 }
 
+static void __init msm7x30_init_late(void)
+{
+	smd_debugfs_init();
+}
+
 MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF")
 	.atag_offset = 0x100,
 	.fixup = msm7x30_fixup,
@@ -127,6 +131,7 @@ MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF")
 	.map_io = msm7x30_map_io,
 	.init_irq = msm7x30_init_irq,
 	.init_machine = msm7x30_init,
+	.init_late = msm7x30_init_late,
 	.timer = &msm_timer,
 MACHINE_END
 
@@ -137,6 +142,7 @@ MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA")
 	.map_io = msm7x30_map_io,
 	.init_irq = msm7x30_init_irq,
 	.init_machine = msm7x30_init,
+	.init_late = msm7x30_init_late,
 	.timer = &msm_timer,
 MACHINE_END
 
@@ -147,5 +153,6 @@ MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID")
 	.map_io = msm7x30_map_io,
 	.init_irq = msm7x30_init_irq,
 	.init_machine = msm7x30_init,
+	.init_late = msm7x30_init_late,
 	.timer = &msm_timer,
 MACHINE_END
diff --git a/arch/arm/mach-msm/board-msm8960.c b/arch/arm/mach-msm/board-msm8960.c
index ed3598128530..65f4a1daa2e5 100644
--- a/arch/arm/mach-msm/board-msm8960.c
+++ b/arch/arm/mach-msm/board-msm8960.c
@@ -93,6 +93,11 @@ static void __init msm8960_rumi3_init(void)
 	platform_add_devices(rumi3_devices, ARRAY_SIZE(rumi3_devices));
 }
 
+static void __init msm8960_init_late(void)
+{
+	smd_debugfs_init();
+}
+
 MACHINE_START(MSM8960_SIM, "QCT MSM8960 SIMULATOR")
 	.fixup = msm8960_fixup,
 	.reserve = msm8960_reserve,
@@ -101,6 +106,7 @@ MACHINE_START(MSM8960_SIM, "QCT MSM8960 SIMULATOR")
 	.timer = &msm_timer,
 	.handle_irq = gic_handle_irq,
 	.init_machine = msm8960_sim_init,
+	.init_late = msm8960_init_late,
 MACHINE_END
 
 MACHINE_START(MSM8960_RUMI3, "QCT MSM8960 RUMI3")
@@ -111,5 +117,6 @@ MACHINE_START(MSM8960_RUMI3, "QCT MSM8960 RUMI3")
 	.timer = &msm_timer,
 	.handle_irq = gic_handle_irq,
 	.init_machine = msm8960_rumi3_init,
+	.init_late = msm8960_init_late,
 MACHINE_END
 
diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c
index 962e71169750..e37a724cd1eb 100644
--- a/arch/arm/mach-msm/board-msm8x60.c
+++ b/arch/arm/mach-msm/board-msm8x60.c
@@ -17,6 +17,7 @@
 #include <linux/irqdomain.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/memblock.h>
 
@@ -49,10 +50,22 @@ static void __init msm8x60_map_io(void)
 	msm_map_msm8x60_io();
 }
 
+#ifdef CONFIG_OF
+static struct of_device_id msm_dt_gic_match[] __initdata = {
+	{ .compatible = "qcom,msm-8660-qgic", .data = gic_of_init },
+	{}
+};
+#endif
+
 static void __init msm8x60_init_irq(void)
 {
-	gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE,
-		 (void *)MSM_QGIC_CPU_BASE);
+	if (!of_have_populated_dt())
+		gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE,
+			 (void *)MSM_QGIC_CPU_BASE);
+#ifdef CONFIG_OF
+	else
+		of_irq_init(msm_dt_gic_match);
+#endif
 
 	/* Edge trigger PPIs except AVS_SVICINT and AVS_SVICINTSWDONE */
 	writel(0xFFFFD7FF, MSM_QGIC_DIST_BASE + GIC_DIST_CONFIG + 4);
@@ -68,21 +81,18 @@ static void __init msm8x60_init(void)
 {
 }
 
+static void __init msm8x60_init_late(void)
+{
+	smd_debugfs_init();
+}
+
 #ifdef CONFIG_OF
 static struct of_dev_auxdata msm_auxdata_lookup[] __initdata = {
 	{}
 };
 
-static struct of_device_id msm_dt_gic_match[] __initdata = {
-	{ .compatible = "qcom,msm-8660-qgic", },
-	{}
-};
-
 static void __init msm8x60_dt_init(void)
 {
-	irq_domain_generate_simple(msm_dt_gic_match, MSM8X60_QGIC_DIST_PHYS,
-				GIC_SPI_START);
-
 	if (of_machine_is_compatible("qcom,msm8660-surf")) {
 		printk(KERN_INFO "Init surf UART registers\n");
 		msm8x60_init_uart12dm();
@@ -106,6 +116,7 @@ MACHINE_START(MSM8X60_RUMI3, "QCT MSM8X60 RUMI3")
 	.init_irq = msm8x60_init_irq,
 	.handle_irq = gic_handle_irq,
 	.init_machine = msm8x60_init,
+	.init_late = msm8x60_init_late,
 	.timer = &msm_timer,
 MACHINE_END
 
@@ -116,6 +127,7 @@ MACHINE_START(MSM8X60_SURF, "QCT MSM8X60 SURF")
 	.init_irq = msm8x60_init_irq,
 	.handle_irq = gic_handle_irq,
 	.init_machine = msm8x60_init,
+	.init_late = msm8x60_init_late,
 	.timer = &msm_timer,
 MACHINE_END
 
@@ -126,6 +138,7 @@ MACHINE_START(MSM8X60_SIM, "QCT MSM8X60 SIMULATOR")
 	.init_irq = msm8x60_init_irq,
 	.handle_irq = gic_handle_irq,
 	.init_machine = msm8x60_init,
+	.init_late = msm8x60_init_late,
 	.timer = &msm_timer,
 MACHINE_END
 
@@ -136,6 +149,7 @@ MACHINE_START(MSM8X60_FFA, "QCT MSM8X60 FFA")
 	.init_irq = msm8x60_init_irq,
 	.handle_irq = gic_handle_irq,
 	.init_machine = msm8x60_init,
+	.init_late = msm8x60_init_late,
 	.timer = &msm_timer,
 MACHINE_END
 
@@ -145,6 +159,7 @@ DT_MACHINE_START(MSM_DT, "Qualcomm MSM (Flattened Device Tree)")
 	.map_io = msm8x60_map_io,
 	.init_irq = msm8x60_init_irq,
 	.init_machine = msm8x60_dt_init,
+	.init_late = msm8x60_init_late,
 	.timer = &msm_timer,
 	.dt_compat = msm8x60_fluid_match,
 MACHINE_END
diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c
index 7e8909c978c3..c8fe0edb9761 100644
--- a/arch/arm/mach-msm/board-qsd8x50.c
+++ b/arch/arm/mach-msm/board-qsd8x50.c
@@ -17,7 +17,6 @@
 #include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/irq.h>
-#include <linux/gpio.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/usb/msm_hsusb.h>
@@ -191,11 +190,17 @@ static void __init qsd8x50_init(void)
 	qsd8x50_init_mmc();
 }
 
+static void __init qsd8x50_init_late(void)
+{
+	smd_debugfs_init();
+}
+
 MACHINE_START(QSD8X50_SURF, "QCT QSD8X50 SURF")
 	.atag_offset = 0x100,
 	.map_io = qsd8x50_map_io,
 	.init_irq = qsd8x50_init_irq,
 	.init_machine = qsd8x50_init,
+	.init_late = qsd8x50_init_late,
 	.timer = &msm_timer,
 MACHINE_END
 
@@ -204,5 +209,6 @@ MACHINE_START(QSD8X50A_ST1_5, "QCT QSD8X50A ST1.5")
 	.map_io = qsd8x50_map_io,
 	.init_irq = qsd8x50_init_irq,
 	.init_machine = qsd8x50_init,
+	.init_late = qsd8x50_init_late,
 	.timer = &msm_timer,
 MACHINE_END
diff --git a/arch/arm/mach-msm/board-sapphire.c b/arch/arm/mach-msm/board-sapphire.c
index 4a8ea0d40b6f..2e569ab10eef 100644
--- a/arch/arm/mach-msm/board-sapphire.c
+++ b/arch/arm/mach-msm/board-sapphire.c
@@ -101,6 +101,11 @@ static void __init sapphire_map_io(void)
 	msm_clock_init();
 }
 
+static void __init sapphire_init_late(void)
+{
+	smd_debugfs_init();
+}
+
 MACHINE_START(SAPPHIRE, "sapphire")
 /* Maintainer: Brian Swetland <swetland@google.com> */
 	.atag_offset    = 0x100,
@@ -108,5 +113,6 @@ MACHINE_START(SAPPHIRE, "sapphire")
 	.map_io         = sapphire_map_io,
 	.init_irq       = sapphire_init_irq,
 	.init_machine   = sapphire_init,
+	.init_late      = sapphire_init_late,
 	.timer          = &msm_timer,
 MACHINE_END
diff --git a/arch/arm/mach-msm/board-trout-panel.c b/arch/arm/mach-msm/board-trout-panel.c
index 25105c1027fe..89bf6b426699 100644
--- a/arch/arm/mach-msm/board-trout-panel.c
+++ b/arch/arm/mach-msm/board-trout-panel.c
@@ -12,6 +12,7 @@
 
 #include <asm/io.h>
 #include <asm/mach-types.h>
+#include <asm/system_info.h>
 
 #include <mach/msm_fb.h>
 #include <mach/vreg.h>
diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c
index 5414f76ec0a9..bbe13f12fa01 100644
--- a/arch/arm/mach-msm/board-trout.c
+++ b/arch/arm/mach-msm/board-trout.c
@@ -19,6 +19,7 @@
 #include <linux/platform_device.h>
 #include <linux/clkdev.h>
 
+#include <asm/system_info.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -97,6 +98,11 @@ static void __init trout_map_io(void)
 	msm_clock_init(msm_clocks_7x01a, msm_num_clocks_7x01a);
 }
 
+static void __init trout_init_late(void)
+{
+	smd_debugfs_init();
+}
+
 MACHINE_START(TROUT, "HTC Dream")
 	.atag_offset	= 0x100,
 	.fixup		= trout_fixup,
@@ -104,5 +110,6 @@ MACHINE_START(TROUT, "HTC Dream")
 	.init_early	= trout_init_early,
 	.init_irq	= trout_init_irq,
 	.init_machine	= trout_init,
+	.init_late	= trout_init_late,
 	.timer		= &msm_timer,
 MACHINE_END
diff --git a/arch/arm/mach-msm/include/mach/board.h b/arch/arm/mach-msm/include/mach/board.h
index 2ce8f1f2fc4d..435f8edfafd1 100644
--- a/arch/arm/mach-msm/include/mach/board.h
+++ b/arch/arm/mach-msm/include/mach/board.h
@@ -47,4 +47,10 @@ int __init msm_add_sdcc(unsigned int controller,
 			struct msm_mmc_platform_data *plat,
 			unsigned int stat_irq, unsigned long stat_irq_flags);
 
+#if defined(CONFIG_MSM_SMD) && defined(CONFIG_DEBUG_FS)
+int smd_debugfs_init(void);
+#else
+static inline int smd_debugfs_init(void) { return 0; }
+#endif
+
 #endif
diff --git a/arch/arm/mach-msm/include/mach/debug-macro.S b/arch/arm/mach-msm/include/mach/debug-macro.S
index 3ffd8668c9a5..0e05f88abcd5 100644
--- a/arch/arm/mach-msm/include/mach/debug-macro.S
+++ b/arch/arm/mach-msm/include/mach/debug-macro.S
@@ -30,8 +30,7 @@
 	@ Write the 1 character to UARTDM_TF
 	str	\rd, [\rx, #0x70]
 #else
-	teq	\rx, #0
-	strne	\rd, [\rx, #0x0C]
+	str	\rd, [\rx, #0x0C]
 #endif
 	.endm
 
diff --git a/arch/arm/mach-msm/include/mach/uncompress.h b/arch/arm/mach-msm/include/mach/uncompress.h
index 169a84007456..c14011fe832d 100644
--- a/arch/arm/mach-msm/include/mach/uncompress.h
+++ b/arch/arm/mach-msm/include/mach/uncompress.h
@@ -16,6 +16,7 @@
 #ifndef __ASM_ARCH_MSM_UNCOMPRESS_H
 #define __ASM_ARCH_MSM_UNCOMPRESS_H
 
+#include <asm/barrier.h>
 #include <asm/processor.h>
 #include <mach/msm_iomap.h>
 
diff --git a/arch/arm/mach-msm/proc_comm.c b/arch/arm/mach-msm/proc_comm.c
index 67e701c7f183..9980dc736e7b 100644
--- a/arch/arm/mach-msm/proc_comm.c
+++ b/arch/arm/mach-msm/proc_comm.c
@@ -121,7 +121,7 @@ int msm_proc_comm(unsigned cmd, unsigned *data1, unsigned *data2)
  * and unknown state. This function should be called early to
  * wait on the ARM9.
  */
-void __init proc_comm_boot_wait(void)
+void __devinit proc_comm_boot_wait(void)
 {
 	void __iomem *base = MSM_SHARED_RAM_BASE;
  
diff --git a/arch/arm/mach-msm/scm.c b/arch/arm/mach-msm/scm.c
index bafabb502580..c536fd6bf827 100644
--- a/arch/arm/mach-msm/scm.c
+++ b/arch/arm/mach-msm/scm.c
@@ -282,6 +282,9 @@ u32 scm_get_version(void)
 			__asmeq("%1", "r1")
 			__asmeq("%2", "r0")
 			__asmeq("%3", "r1")
+#ifdef REQUIRES_SEC
+			".arch_extension sec\n"
+#endif
 			"smc	#0	@ switch to secure world\n"
 			: "=r" (r0), "=r" (r1)
 			: "r" (r0), "r" (r1)
diff --git a/arch/arm/mach-msm/smd_debug.c b/arch/arm/mach-msm/smd_debug.c
index 0c56a5aaf588..8056b3e5590f 100644
--- a/arch/arm/mach-msm/smd_debug.c
+++ b/arch/arm/mach-msm/smd_debug.c
@@ -203,15 +203,9 @@ static ssize_t debug_read(struct file *file, char __user *buf,
 	return simple_read_from_buffer(buf, count, ppos, debug_buffer, bsize);
 }
 
-static int debug_open(struct inode *inode, struct file *file)
-{
-	file->private_data = inode->i_private;
-	return 0;
-}
-
 static const struct file_operations debug_ops = {
 	.read = debug_read,
-	.open = debug_open,
+	.open = simple_open,
 	.llseek = default_llseek,
 };
 
@@ -222,7 +216,7 @@ static void debug_create(const char *name, umode_t mode,
 	debugfs_create_file(name, mode, dent, fill, &debug_ops);
 }
 
-static int smd_debugfs_init(void)
+int __init smd_debugfs_init(void)
 {
 	struct dentry *dent;
 
@@ -240,7 +234,6 @@ static int smd_debugfs_init(void)
 	return 0;
 }
 
-late_initcall(smd_debugfs_init);
 #endif
 
 
diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
index a5dcf766a3f9..b4c53b846c9c 100644
--- a/arch/arm/mach-mv78xx0/common.c
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -13,6 +13,7 @@
 #include <linux/platform_device.h>
 #include <linux/serial_8250.h>
 #include <linux/ata_platform.h>
+#include <linux/clk-provider.h>
 #include <linux/ethtool.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
@@ -103,24 +104,24 @@ static void get_pclk_l2clk(int hclk, int core_index, int *pclk, int *l2clk)
 
 static int get_tclk(void)
 {
-	int tclk;
+	int tclk_freq;
 
 	/*
 	 * TCLK tick rate is configured by DEV_A[2:0] strap pins.
 	 */
 	switch ((readl(SAMPLE_AT_RESET_HIGH) >> 6) & 7) {
 	case 1:
-		tclk = 166666667;
+		tclk_freq = 166666667;
 		break;
 	case 3:
-		tclk = 200000000;
+		tclk_freq = 200000000;
 		break;
 	default:
 		panic("unknown TCLK PLL setting: %.8x\n",
 			readl(SAMPLE_AT_RESET_HIGH));
 	}
 
-	return tclk;
+	return tclk_freq;
 }
 
 
@@ -166,6 +167,19 @@ void __init mv78xx0_map_io(void)
 
 
 /*****************************************************************************
+ * CLK tree
+ ****************************************************************************/
+static struct clk *tclk;
+
+static void __init clk_init(void)
+{
+	tclk = clk_register_fixed_rate(NULL, "tclk", NULL, CLK_IS_ROOT,
+				       get_tclk());
+
+	orion_clkdev_init(tclk);
+}
+
+/*****************************************************************************
  * EHCI
  ****************************************************************************/
 void __init mv78xx0_ehci0_init(void)
@@ -199,7 +213,7 @@ void __init mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data)
 {
 	orion_ge00_init(eth_data,
 			GE00_PHYS_BASE, IRQ_MV78XX0_GE00_SUM,
-			IRQ_MV78XX0_GE_ERR, get_tclk());
+			IRQ_MV78XX0_GE_ERR);
 }
 
 
@@ -210,7 +224,7 @@ void __init mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data)
 {
 	orion_ge01_init(eth_data,
 			GE01_PHYS_BASE, IRQ_MV78XX0_GE01_SUM,
-			NO_IRQ, get_tclk());
+			NO_IRQ);
 }
 
 
@@ -234,7 +248,7 @@ void __init mv78xx0_ge10_init(struct mv643xx_eth_platform_data *eth_data)
 
 	orion_ge10_init(eth_data,
 			GE10_PHYS_BASE, IRQ_MV78XX0_GE10_SUM,
-			NO_IRQ, get_tclk());
+			NO_IRQ);
 }
 
 
@@ -258,7 +272,7 @@ void __init mv78xx0_ge11_init(struct mv643xx_eth_platform_data *eth_data)
 
 	orion_ge11_init(eth_data,
 			GE11_PHYS_BASE, IRQ_MV78XX0_GE11_SUM,
-			NO_IRQ, get_tclk());
+			NO_IRQ);
 }
 
 /*****************************************************************************
@@ -285,7 +299,7 @@ void __init mv78xx0_sata_init(struct mv_sata_platform_data *sata_data)
 void __init mv78xx0_uart0_init(void)
 {
 	orion_uart0_init(UART0_VIRT_BASE, UART0_PHYS_BASE,
-			 IRQ_MV78XX0_UART_0, get_tclk());
+			 IRQ_MV78XX0_UART_0, tclk);
 }
 
 
@@ -295,7 +309,7 @@ void __init mv78xx0_uart0_init(void)
 void __init mv78xx0_uart1_init(void)
 {
 	orion_uart1_init(UART1_VIRT_BASE, UART1_PHYS_BASE,
-			 IRQ_MV78XX0_UART_1, get_tclk());
+			 IRQ_MV78XX0_UART_1, tclk);
 }
 
 
@@ -305,7 +319,7 @@ void __init mv78xx0_uart1_init(void)
 void __init mv78xx0_uart2_init(void)
 {
 	orion_uart2_init(UART2_VIRT_BASE, UART2_PHYS_BASE,
-			 IRQ_MV78XX0_UART_2, get_tclk());
+			 IRQ_MV78XX0_UART_2, tclk);
 }
 
 /*****************************************************************************
@@ -314,7 +328,7 @@ void __init mv78xx0_uart2_init(void)
 void __init mv78xx0_uart3_init(void)
 {
 	orion_uart3_init(UART3_VIRT_BASE, UART3_PHYS_BASE,
-			 IRQ_MV78XX0_UART_3, get_tclk());
+			 IRQ_MV78XX0_UART_3, tclk);
 }
 
 /*****************************************************************************
@@ -378,25 +392,26 @@ void __init mv78xx0_init(void)
 	int hclk;
 	int pclk;
 	int l2clk;
-	int tclk;
 
 	core_index = mv78xx0_core_index();
 	hclk = get_hclk();
 	get_pclk_l2clk(hclk, core_index, &pclk, &l2clk);
-	tclk = get_tclk();
 
 	printk(KERN_INFO "%s ", mv78xx0_id());
 	printk("core #%d, ", core_index);
 	printk("PCLK = %dMHz, ", (pclk + 499999) / 1000000);
 	printk("L2 = %dMHz, ", (l2clk + 499999) / 1000000);
 	printk("HCLK = %dMHz, ", (hclk + 499999) / 1000000);
-	printk("TCLK = %dMHz\n", (tclk + 499999) / 1000000);
+	printk("TCLK = %dMHz\n", (get_tclk() + 499999) / 1000000);
 
 	mv78xx0_setup_cpu_mbus();
 
 #ifdef CONFIG_CACHE_FEROCEON_L2
 	feroceon_l2_init(is_l2_writethrough());
 #endif
+
+	/* Setup root of clk tree */
+	clk_init();
 }
 
 void mv78xx0_restart(char mode, const char *cmd)
diff --git a/arch/arm/mach-mv78xx0/pcie.c b/arch/arm/mach-mv78xx0/pcie.c
index df3e38055a24..2e56e86b6d68 100644
--- a/arch/arm/mach-mv78xx0/pcie.c
+++ b/arch/arm/mach-mv78xx0/pcie.c
@@ -147,6 +147,7 @@ static int __init mv78xx0_pcie_setup(int nr, struct pci_sys_data *sys)
 		return 0;
 
 	pp = &pcie_port[nr];
+	sys->private_data = pp;
 	pp->root_bus_nr = sys->busnr;
 
 	/*
@@ -161,19 +162,6 @@ static int __init mv78xx0_pcie_setup(int nr, struct pci_sys_data *sys)
 	return 1;
 }
 
-static struct pcie_port *bus_to_port(int bus)
-{
-	int i;
-
-	for (i = num_pcie_ports - 1; i >= 0; i--) {
-		int rbus = pcie_port[i].root_bus_nr;
-		if (rbus != -1 && rbus <= bus)
-			break;
-	}
-
-	return i >= 0 ? pcie_port + i : NULL;
-}
-
 static int pcie_valid_config(struct pcie_port *pp, int bus, int dev)
 {
 	/*
@@ -189,7 +177,8 @@ static int pcie_valid_config(struct pcie_port *pp, int bus, int dev)
 static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
 			int size, u32 *val)
 {
-	struct pcie_port *pp = bus_to_port(bus->number);
+	struct pci_sys_data *sys = bus->sysdata;
+	struct pcie_port *pp = sys->private_data;
 	unsigned long flags;
 	int ret;
 
@@ -208,7 +197,8 @@ static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
 static int pcie_wr_conf(struct pci_bus *bus, u32 devfn,
 			int where, int size, u32 val)
 {
-	struct pcie_port *pp = bus_to_port(bus->number);
+	struct pci_sys_data *sys = bus->sysdata;
+	struct pcie_port *pp = sys->private_data;
 	unsigned long flags;
 	int ret;
 
@@ -263,7 +253,8 @@ mv78xx0_pcie_scan_bus(int nr, struct pci_sys_data *sys)
 static int __init mv78xx0_pcie_map_irq(const struct pci_dev *dev, u8 slot,
 	u8 pin)
 {
-	struct pcie_port *pp = bus_to_port(dev->bus->number);
+	struct pci_sys_data *sys = dev->bus->sysdata;
+	struct pcie_port *pp = sys->private_data;
 
 	return IRQ_MV78XX0_PCIE_00 + (pp->maj << 2) + pp->min;
 }
@@ -271,7 +262,6 @@ static int __init mv78xx0_pcie_map_irq(const struct pci_dev *dev, u8 slot,
 static struct hw_pci mv78xx0_pci __initdata = {
 	.nr_controllers	= 8,
 	.preinit	= mv78xx0_pcie_preinit,
-	.swizzle	= pci_std_swizzle,
 	.setup		= mv78xx0_pcie_setup,
 	.scan		= mv78xx0_pcie_scan_bus,
 	.map_irq	= mv78xx0_pcie_map_irq,
diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
index c57f9964a713..91cf0625819c 100644
--- a/arch/arm/mach-mxs/Kconfig
+++ b/arch/arm/mach-mxs/Kconfig
@@ -7,16 +7,28 @@ config MXS_OCOTP
 
 config SOC_IMX23
 	bool
+	select ARM_AMBA
 	select CPU_ARM926T
 	select HAVE_PWM
+	select PINCTRL_IMX23
 
 config SOC_IMX28
 	bool
+	select ARM_AMBA
 	select CPU_ARM926T
 	select HAVE_PWM
+	select PINCTRL_IMX28
 
 comment "MXS platforms:"
 
+config MACH_MXS_DT
+	bool "Support MXS platforms from device tree"
+	select SOC_IMX23
+	select SOC_IMX28
+	help
+	  Include support for Freescale MXS platforms(i.MX23 and i.MX28)
+	  using the device tree for discovery
+
 config MACH_STMP378X_DEVB
 	bool "Support STMP378x_devb Platform"
 	select SOC_IMX23
diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile
index 908bf9a567f1..e41590ccb437 100644
--- a/arch/arm/mach-mxs/Makefile
+++ b/arch/arm/mach-mxs/Makefile
@@ -1,12 +1,10 @@
 # Common support
-obj-y := clock.o devices.o icoll.o iomux.o system.o timer.o mm.o
+obj-y := devices.o icoll.o iomux.o system.o timer.o mm.o
 
 obj-$(CONFIG_MXS_OCOTP) += ocotp.o
 obj-$(CONFIG_PM) += pm.o
 
-obj-$(CONFIG_SOC_IMX23) += clock-mx23.o
-obj-$(CONFIG_SOC_IMX28) += clock-mx28.o
-
+obj-$(CONFIG_MACH_MXS_DT) += mach-mxs.o
 obj-$(CONFIG_MACH_STMP378X_DEVB) += mach-stmp378x_devb.o
 obj-$(CONFIG_MACH_MX23EVK) += mach-mx23evk.o
 obj-$(CONFIG_MACH_MX28EVK) += mach-mx28evk.o
diff --git a/arch/arm/mach-mxs/clock-mx23.c b/arch/arm/mach-mxs/clock-mx23.c
deleted file mode 100644
index e3ac52c34019..000000000000
--- a/arch/arm/mach-mxs/clock-mx23.c
+++ /dev/null
@@ -1,536 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/jiffies.h>
-#include <linux/clkdev.h>
-
-#include <asm/clkdev.h>
-#include <asm/div64.h>
-
-#include <mach/mx23.h>
-#include <mach/common.h>
-#include <mach/clock.h>
-
-#include "regs-clkctrl-mx23.h"
-
-#define CLKCTRL_BASE_ADDR	MX23_IO_ADDRESS(MX23_CLKCTRL_BASE_ADDR)
-#define DIGCTRL_BASE_ADDR	MX23_IO_ADDRESS(MX23_DIGCTL_BASE_ADDR)
-
-#define PARENT_RATE_SHIFT	8
-
-static int _raw_clk_enable(struct clk *clk)
-{
-	u32 reg;
-
-	if (clk->enable_reg) {
-		reg = __raw_readl(clk->enable_reg);
-		reg &= ~(1 << clk->enable_shift);
-		__raw_writel(reg, clk->enable_reg);
-	}
-
-	return 0;
-}
-
-static void _raw_clk_disable(struct clk *clk)
-{
-	u32 reg;
-
-	if (clk->enable_reg) {
-		reg = __raw_readl(clk->enable_reg);
-		reg |= 1 << clk->enable_shift;
-		__raw_writel(reg, clk->enable_reg);
-	}
-}
-
-/*
- * ref_xtal_clk
- */
-static unsigned long ref_xtal_clk_get_rate(struct clk *clk)
-{
-	return 24000000;
-}
-
-static struct clk ref_xtal_clk = {
-	.get_rate = ref_xtal_clk_get_rate,
-};
-
-/*
- * pll_clk
- */
-static unsigned long pll_clk_get_rate(struct clk *clk)
-{
-	return 480000000;
-}
-
-static int pll_clk_enable(struct clk *clk)
-{
-	__raw_writel(BM_CLKCTRL_PLLCTRL0_POWER |
-			BM_CLKCTRL_PLLCTRL0_EN_USB_CLKS,
-			CLKCTRL_BASE_ADDR + HW_CLKCTRL_PLLCTRL0_SET);
-
-	/* Only a 10us delay is need. PLLCTRL1 LOCK bitfied is only a timer
-	 * and is incorrect (excessive). Per definition of the PLLCTRL0
-	 * POWER field, waiting at least 10us.
-	 */
-	udelay(10);
-
-	return 0;
-}
-
-static void pll_clk_disable(struct clk *clk)
-{
-	__raw_writel(BM_CLKCTRL_PLLCTRL0_POWER |
-			BM_CLKCTRL_PLLCTRL0_EN_USB_CLKS,
-			CLKCTRL_BASE_ADDR + HW_CLKCTRL_PLLCTRL0_CLR);
-}
-
-static struct clk pll_clk = {
-	 .get_rate = pll_clk_get_rate,
-	 .enable = pll_clk_enable,
-	 .disable = pll_clk_disable,
-	 .parent = &ref_xtal_clk,
-};
-
-/*
- * ref_clk
- */
-#define _CLK_GET_RATE_REF(name, sr, ss)					\
-static unsigned long name##_get_rate(struct clk *clk)			\
-{									\
-	unsigned long parent_rate;					\
-	u32 reg, div;							\
-									\
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##sr);		\
-	div = (reg >> BP_CLKCTRL_##sr##_##ss##FRAC) & 0x3f;		\
-	parent_rate = clk_get_rate(clk->parent);			\
-									\
-	return SH_DIV((parent_rate >> PARENT_RATE_SHIFT) * 18,		\
-			div, PARENT_RATE_SHIFT);			\
-}
-
-_CLK_GET_RATE_REF(ref_cpu_clk, FRAC, CPU)
-_CLK_GET_RATE_REF(ref_emi_clk, FRAC, EMI)
-_CLK_GET_RATE_REF(ref_pix_clk, FRAC, PIX)
-_CLK_GET_RATE_REF(ref_io_clk, FRAC, IO)
-
-#define _DEFINE_CLOCK_REF(name, er, es)					\
-	static struct clk name = {					\
-		.enable_reg	= CLKCTRL_BASE_ADDR + HW_CLKCTRL_##er,	\
-		.enable_shift	= BP_CLKCTRL_##er##_CLKGATE##es,	\
-		.get_rate	= name##_get_rate,			\
-		.enable		= _raw_clk_enable,			\
-		.disable	= _raw_clk_disable,			\
-		.parent		= &pll_clk,				\
-	}
-
-_DEFINE_CLOCK_REF(ref_cpu_clk, FRAC, CPU);
-_DEFINE_CLOCK_REF(ref_emi_clk, FRAC, EMI);
-_DEFINE_CLOCK_REF(ref_pix_clk, FRAC, PIX);
-_DEFINE_CLOCK_REF(ref_io_clk, FRAC, IO);
-
-/*
- * General clocks
- *
- * clk_get_rate
- */
-static unsigned long rtc_clk_get_rate(struct clk *clk)
-{
-	/* ref_xtal_clk is implemented as the only parent */
-	return clk_get_rate(clk->parent) / 768;
-}
-
-static unsigned long clk32k_clk_get_rate(struct clk *clk)
-{
-	return clk->parent->get_rate(clk->parent) / 750;
-}
-
-#define _CLK_GET_RATE(name, rs)						\
-static unsigned long name##_get_rate(struct clk *clk)			\
-{									\
-	u32 reg, div;							\
-									\
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs);		\
-									\
-	if (clk->parent == &ref_xtal_clk)				\
-		div = (reg & BM_CLKCTRL_##rs##_DIV_XTAL) >>		\
-			BP_CLKCTRL_##rs##_DIV_XTAL;			\
-	else								\
-		div = (reg & BM_CLKCTRL_##rs##_DIV_##rs) >>		\
-			BP_CLKCTRL_##rs##_DIV_##rs;			\
-									\
-	if (!div)							\
-		return -EINVAL;						\
-									\
-	return clk_get_rate(clk->parent) / div;				\
-}
-
-_CLK_GET_RATE(cpu_clk, CPU)
-_CLK_GET_RATE(emi_clk, EMI)
-
-#define _CLK_GET_RATE1(name, rs)					\
-static unsigned long name##_get_rate(struct clk *clk)			\
-{									\
-	u32 reg, div;							\
-									\
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs);		\
-	div = (reg & BM_CLKCTRL_##rs##_DIV) >> BP_CLKCTRL_##rs##_DIV;	\
-									\
-	if (!div)							\
-		return -EINVAL;						\
-									\
-	return clk_get_rate(clk->parent) / div;				\
-}
-
-_CLK_GET_RATE1(hbus_clk, HBUS)
-_CLK_GET_RATE1(xbus_clk, XBUS)
-_CLK_GET_RATE1(ssp_clk, SSP)
-_CLK_GET_RATE1(gpmi_clk, GPMI)
-_CLK_GET_RATE1(lcdif_clk, PIX)
-
-#define _CLK_GET_RATE_STUB(name)					\
-static unsigned long name##_get_rate(struct clk *clk)			\
-{									\
-	return clk_get_rate(clk->parent);				\
-}
-
-_CLK_GET_RATE_STUB(uart_clk)
-_CLK_GET_RATE_STUB(audio_clk)
-_CLK_GET_RATE_STUB(pwm_clk)
-
-/*
- * clk_set_rate
- */
-static int cpu_clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 reg, bm_busy, div_max, d, f, div, frac;
-	unsigned long diff, parent_rate, calc_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	if (clk->parent == &ref_xtal_clk) {
-		div_max = BM_CLKCTRL_CPU_DIV_XTAL >> BP_CLKCTRL_CPU_DIV_XTAL;
-		bm_busy = BM_CLKCTRL_CPU_BUSY_REF_XTAL;
-		div = DIV_ROUND_UP(parent_rate, rate);
-		if (div == 0 || div > div_max)
-			return -EINVAL;
-	} else {
-		div_max = BM_CLKCTRL_CPU_DIV_CPU >> BP_CLKCTRL_CPU_DIV_CPU;
-		bm_busy = BM_CLKCTRL_CPU_BUSY_REF_CPU;
-		rate >>= PARENT_RATE_SHIFT;
-		parent_rate >>= PARENT_RATE_SHIFT;
-		diff = parent_rate;
-		div = frac = 1;
-		for (d = 1; d <= div_max; d++) {
-			f = parent_rate * 18 / d / rate;
-			if ((parent_rate * 18 / d) % rate)
-				f++;
-			if (f < 18 || f > 35)
-				continue;
-
-			calc_rate = parent_rate * 18 / f / d;
-			if (calc_rate > rate)
-				continue;
-
-			if (rate - calc_rate < diff) {
-				frac = f;
-				div = d;
-				diff = rate - calc_rate;
-			}
-
-			if (diff == 0)
-				break;
-		}
-
-		if (diff == parent_rate)
-			return -EINVAL;
-
-		reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC);
-		reg &= ~BM_CLKCTRL_FRAC_CPUFRAC;
-		reg |= frac;
-		__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC);
-	}
-
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU);
-	reg &= ~BM_CLKCTRL_CPU_DIV_CPU;
-	reg |= div << BP_CLKCTRL_CPU_DIV_CPU;
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU);
-
-	mxs_clkctrl_timeout(HW_CLKCTRL_CPU, bm_busy);
-
-	return 0;
-}
-
-#define _CLK_SET_RATE(name, dr)						\
-static int name##_set_rate(struct clk *clk, unsigned long rate)		\
-{									\
-	u32 reg, div_max, div;						\
-	unsigned long parent_rate;					\
-									\
-	parent_rate = clk_get_rate(clk->parent);			\
-	div_max = BM_CLKCTRL_##dr##_DIV >> BP_CLKCTRL_##dr##_DIV;	\
-									\
-	div = DIV_ROUND_UP(parent_rate, rate);				\
-	if (div == 0 || div > div_max)					\
-		return -EINVAL;						\
-									\
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr);		\
-	reg &= ~BM_CLKCTRL_##dr##_DIV;					\
-	reg |= div << BP_CLKCTRL_##dr##_DIV;				\
-	if (reg & (1 << clk->enable_shift)) {				\
-		pr_err("%s: clock is gated\n", __func__);		\
-		return -EINVAL;						\
-	}								\
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr);		\
-									\
-	mxs_clkctrl_timeout(HW_CLKCTRL_##dr, BM_CLKCTRL_##dr##_BUSY);	\
-	return 0;							\
-}
-
-_CLK_SET_RATE(xbus_clk, XBUS)
-_CLK_SET_RATE(ssp_clk, SSP)
-_CLK_SET_RATE(gpmi_clk, GPMI)
-_CLK_SET_RATE(lcdif_clk, PIX)
-
-#define _CLK_SET_RATE_STUB(name)					\
-static int name##_set_rate(struct clk *clk, unsigned long rate)		\
-{									\
-	return -EINVAL;							\
-}
-
-_CLK_SET_RATE_STUB(emi_clk)
-_CLK_SET_RATE_STUB(uart_clk)
-_CLK_SET_RATE_STUB(audio_clk)
-_CLK_SET_RATE_STUB(pwm_clk)
-_CLK_SET_RATE_STUB(clk32k_clk)
-
-/*
- * clk_set_parent
- */
-#define _CLK_SET_PARENT(name, bit)					\
-static int name##_set_parent(struct clk *clk, struct clk *parent)	\
-{									\
-	if (parent != clk->parent) {					\
-		__raw_writel(BM_CLKCTRL_CLKSEQ_BYPASS_##bit,		\
-			 CLKCTRL_BASE_ADDR + HW_CLKCTRL_CLKSEQ_TOG);	\
-		clk->parent = parent;					\
-	}								\
-									\
-	return 0;							\
-}
-
-_CLK_SET_PARENT(cpu_clk, CPU)
-_CLK_SET_PARENT(emi_clk, EMI)
-_CLK_SET_PARENT(ssp_clk, SSP)
-_CLK_SET_PARENT(gpmi_clk, GPMI)
-_CLK_SET_PARENT(lcdif_clk, PIX)
-
-#define _CLK_SET_PARENT_STUB(name)					\
-static int name##_set_parent(struct clk *clk, struct clk *parent)	\
-{									\
-	if (parent != clk->parent)					\
-		return -EINVAL;						\
-	else								\
-		return 0;						\
-}
-
-_CLK_SET_PARENT_STUB(uart_clk)
-_CLK_SET_PARENT_STUB(audio_clk)
-_CLK_SET_PARENT_STUB(pwm_clk)
-_CLK_SET_PARENT_STUB(clk32k_clk)
-
-/*
- * clk definition
- */
-static struct clk cpu_clk = {
-	.get_rate = cpu_clk_get_rate,
-	.set_rate = cpu_clk_set_rate,
-	.set_parent = cpu_clk_set_parent,
-	.parent = &ref_cpu_clk,
-};
-
-static struct clk hbus_clk = {
-	.get_rate = hbus_clk_get_rate,
-	.parent = &cpu_clk,
-};
-
-static struct clk xbus_clk = {
-	.get_rate = xbus_clk_get_rate,
-	.set_rate = xbus_clk_set_rate,
-	.parent = &ref_xtal_clk,
-};
-
-static struct clk rtc_clk = {
-	.get_rate = rtc_clk_get_rate,
-	.parent = &ref_xtal_clk,
-};
-
-/* usb_clk gate is controlled in DIGCTRL other than CLKCTRL */
-static struct clk usb_clk = {
-	.enable_reg = DIGCTRL_BASE_ADDR,
-	.enable_shift = 2,
-	.enable = _raw_clk_enable,
-	.disable = _raw_clk_disable,
-	.parent = &pll_clk,
-};
-
-#define _DEFINE_CLOCK(name, er, es, p)					\
-	static struct clk name = {					\
-		.enable_reg	= CLKCTRL_BASE_ADDR + HW_CLKCTRL_##er,	\
-		.enable_shift	= BP_CLKCTRL_##er##_##es,		\
-		.get_rate	= name##_get_rate,			\
-		.set_rate	= name##_set_rate,			\
-		.set_parent	= name##_set_parent,			\
-		.enable		= _raw_clk_enable,			\
-		.disable	= _raw_clk_disable,			\
-		.parent		= p,					\
-	}
-
-_DEFINE_CLOCK(emi_clk, EMI, CLKGATE, &ref_xtal_clk);
-_DEFINE_CLOCK(ssp_clk, SSP, CLKGATE, &ref_xtal_clk);
-_DEFINE_CLOCK(gpmi_clk, GPMI, CLKGATE, &ref_xtal_clk);
-_DEFINE_CLOCK(lcdif_clk, PIX, CLKGATE, &ref_xtal_clk);
-_DEFINE_CLOCK(uart_clk, XTAL, UART_CLK_GATE, &ref_xtal_clk);
-_DEFINE_CLOCK(audio_clk, XTAL, FILT_CLK24M_GATE, &ref_xtal_clk);
-_DEFINE_CLOCK(pwm_clk, XTAL, PWM_CLK24M_GATE, &ref_xtal_clk);
-_DEFINE_CLOCK(clk32k_clk, XTAL, TIMROT_CLK32K_GATE, &ref_xtal_clk);
-
-#define _REGISTER_CLOCK(d, n, c) \
-	{ \
-		.dev_id = d, \
-		.con_id = n, \
-		.clk = &c, \
-	},
-
-static struct clk_lookup lookups[] = {
-	/* for amba bus driver */
-	_REGISTER_CLOCK("duart", "apb_pclk", xbus_clk)
-	/* for amba-pl011 driver */
-	_REGISTER_CLOCK("duart", NULL, uart_clk)
-	_REGISTER_CLOCK("mxs-auart.0", NULL, uart_clk)
-	_REGISTER_CLOCK("rtc", NULL, rtc_clk)
-	_REGISTER_CLOCK("mxs-dma-apbh", NULL, hbus_clk)
-	_REGISTER_CLOCK("mxs-dma-apbx", NULL, xbus_clk)
-	_REGISTER_CLOCK("mxs-mmc.0", NULL, ssp_clk)
-	_REGISTER_CLOCK("mxs-mmc.1", NULL, ssp_clk)
-	_REGISTER_CLOCK(NULL, "usb", usb_clk)
-	_REGISTER_CLOCK(NULL, "audio", audio_clk)
-	_REGISTER_CLOCK("mxs-pwm.0", NULL, pwm_clk)
-	_REGISTER_CLOCK("mxs-pwm.1", NULL, pwm_clk)
-	_REGISTER_CLOCK("mxs-pwm.2", NULL, pwm_clk)
-	_REGISTER_CLOCK("mxs-pwm.3", NULL, pwm_clk)
-	_REGISTER_CLOCK("mxs-pwm.4", NULL, pwm_clk)
-	_REGISTER_CLOCK("imx23-fb", NULL, lcdif_clk)
-	_REGISTER_CLOCK("imx23-gpmi-nand", NULL, gpmi_clk)
-};
-
-static int clk_misc_init(void)
-{
-	u32 reg;
-	int ret;
-
-	/* Fix up parent per register setting */
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_CLKSEQ);
-	cpu_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_CPU) ?
-			&ref_xtal_clk : &ref_cpu_clk;
-	emi_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_EMI) ?
-			&ref_xtal_clk : &ref_emi_clk;
-	ssp_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_SSP) ?
-			&ref_xtal_clk : &ref_io_clk;
-	gpmi_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_GPMI) ?
-			&ref_xtal_clk : &ref_io_clk;
-	lcdif_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_PIX) ?
-			&ref_xtal_clk : &ref_pix_clk;
-
-	/* Use int div over frac when both are available */
-	__raw_writel(BM_CLKCTRL_CPU_DIV_XTAL_FRAC_EN,
-			CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_CLR);
-	__raw_writel(BM_CLKCTRL_CPU_DIV_CPU_FRAC_EN,
-			CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_CLR);
-	__raw_writel(BM_CLKCTRL_HBUS_DIV_FRAC_EN,
-			CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS_CLR);
-
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_XBUS);
-	reg &= ~BM_CLKCTRL_XBUS_DIV_FRAC_EN;
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_XBUS);
-
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP);
-	reg &= ~BM_CLKCTRL_SSP_DIV_FRAC_EN;
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP);
-
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_GPMI);
-	reg &= ~BM_CLKCTRL_GPMI_DIV_FRAC_EN;
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_GPMI);
-
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_PIX);
-	reg &= ~BM_CLKCTRL_PIX_DIV_FRAC_EN;
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_PIX);
-
-	/*
-	 * Set safe hbus clock divider. A divider of 3 ensure that
-	 * the Vddd voltage required for the cpu clock is sufficiently
-	 * high for the hbus clock.
-	 */
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS);
-	reg &= BM_CLKCTRL_HBUS_DIV;
-	reg |= 3 << BP_CLKCTRL_HBUS_DIV;
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS);
-
-	ret = mxs_clkctrl_timeout(HW_CLKCTRL_HBUS, BM_CLKCTRL_HBUS_BUSY);
-
-	/* Gate off cpu clock in WFI for power saving */
-	__raw_writel(BM_CLKCTRL_CPU_INTERRUPT_WAIT,
-			CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_SET);
-
-	/*
-	 * 480 MHz seems too high to be ssp clock source directly,
-	 * so set frac to get a 288 MHz ref_io.
-	 */
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC);
-	reg &= ~BM_CLKCTRL_FRAC_IOFRAC;
-	reg |= 30 << BP_CLKCTRL_FRAC_IOFRAC;
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC);
-
-	return ret;
-}
-
-int __init mx23_clocks_init(void)
-{
-	clk_misc_init();
-
-	/*
-	 * source ssp clock from ref_io than ref_xtal,
-	 * as ref_xtal only provides 24 MHz as maximum.
-	 */
-	clk_set_parent(&ssp_clk, &ref_io_clk);
-
-	clk_prepare_enable(&cpu_clk);
-	clk_prepare_enable(&hbus_clk);
-	clk_prepare_enable(&xbus_clk);
-	clk_prepare_enable(&emi_clk);
-	clk_prepare_enable(&uart_clk);
-
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
-	mxs_timer_init(&clk32k_clk, MX23_INT_TIMER0);
-
-	return 0;
-}
diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c
deleted file mode 100644
index cea29c99e214..000000000000
--- a/arch/arm/mach-mxs/clock-mx28.c
+++ /dev/null
@@ -1,803 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/jiffies.h>
-#include <linux/clkdev.h>
-#include <linux/spinlock.h>
-
-#include <asm/clkdev.h>
-#include <asm/div64.h>
-
-#include <mach/mx28.h>
-#include <mach/common.h>
-#include <mach/clock.h>
-#include <mach/digctl.h>
-
-#include "regs-clkctrl-mx28.h"
-
-#define CLKCTRL_BASE_ADDR	MX28_IO_ADDRESS(MX28_CLKCTRL_BASE_ADDR)
-#define DIGCTRL_BASE_ADDR	MX28_IO_ADDRESS(MX28_DIGCTL_BASE_ADDR)
-
-#define PARENT_RATE_SHIFT	8
-
-static struct clk pll2_clk;
-static struct clk cpu_clk;
-static struct clk emi_clk;
-static struct clk saif0_clk;
-static struct clk saif1_clk;
-static struct clk clk32k_clk;
-static DEFINE_SPINLOCK(clkmux_lock);
-
-/*
- * HW_SAIF_CLKMUX_SEL:
- *  DIRECT(0x0): SAIF0 clock pins selected for SAIF0 input clocks, and SAIF1
- *		clock pins selected for SAIF1 input clocks.
- *  CROSSINPUT(0x1): SAIF1 clock inputs selected for SAIF0 input clocks, and
- *		SAIF0 clock inputs selected for SAIF1 input clocks.
- *  EXTMSTR0(0x2): SAIF0 clock pin selected for both SAIF0 and SAIF1 input
- *		clocks.
- *  EXTMSTR1(0x3): SAIF1 clock pin selected for both SAIF0 and SAIF1 input
- *		clocks.
- */
-int mxs_saif_clkmux_select(unsigned int clkmux)
-{
-	if (clkmux > 0x3)
-		return -EINVAL;
-
-	spin_lock(&clkmux_lock);
-	__raw_writel(BM_DIGCTL_CTRL_SAIF_CLKMUX,
-			DIGCTRL_BASE_ADDR + HW_DIGCTL_CTRL + MXS_CLR_ADDR);
-	__raw_writel(clkmux << BP_DIGCTL_CTRL_SAIF_CLKMUX,
-			DIGCTRL_BASE_ADDR + HW_DIGCTL_CTRL + MXS_SET_ADDR);
-	spin_unlock(&clkmux_lock);
-
-	return 0;
-}
-
-static int _raw_clk_enable(struct clk *clk)
-{
-	u32 reg;
-
-	if (clk->enable_reg) {
-		reg = __raw_readl(clk->enable_reg);
-		reg &= ~(1 << clk->enable_shift);
-		__raw_writel(reg, clk->enable_reg);
-	}
-
-	return 0;
-}
-
-static void _raw_clk_disable(struct clk *clk)
-{
-	u32 reg;
-
-	if (clk->enable_reg) {
-		reg = __raw_readl(clk->enable_reg);
-		reg |= 1 << clk->enable_shift;
-		__raw_writel(reg, clk->enable_reg);
-	}
-}
-
-/*
- * ref_xtal_clk
- */
-static unsigned long ref_xtal_clk_get_rate(struct clk *clk)
-{
-	return 24000000;
-}
-
-static struct clk ref_xtal_clk = {
-	.get_rate = ref_xtal_clk_get_rate,
-};
-
-/*
- * pll_clk
- */
-static unsigned long pll0_clk_get_rate(struct clk *clk)
-{
-	return 480000000;
-}
-
-static unsigned long pll1_clk_get_rate(struct clk *clk)
-{
-	return 480000000;
-}
-
-static unsigned long pll2_clk_get_rate(struct clk *clk)
-{
-	return 50000000;
-}
-
-#define _CLK_ENABLE_PLL(name, r, g)					\
-static int name##_enable(struct clk *clk)				\
-{									\
-	__raw_writel(BM_CLKCTRL_##r##CTRL0_POWER,			\
-		     CLKCTRL_BASE_ADDR + HW_CLKCTRL_##r##CTRL0_SET);	\
-	udelay(10);							\
-									\
-	if (clk == &pll2_clk)						\
-		__raw_writel(BM_CLKCTRL_##r##CTRL0_##g,			\
-			CLKCTRL_BASE_ADDR + HW_CLKCTRL_##r##CTRL0_CLR);	\
-	else								\
-		__raw_writel(BM_CLKCTRL_##r##CTRL0_##g,			\
-			CLKCTRL_BASE_ADDR + HW_CLKCTRL_##r##CTRL0_SET);	\
-									\
-	return 0;							\
-}
-
-_CLK_ENABLE_PLL(pll0_clk, PLL0, EN_USB_CLKS)
-_CLK_ENABLE_PLL(pll1_clk, PLL1, EN_USB_CLKS)
-_CLK_ENABLE_PLL(pll2_clk, PLL2, CLKGATE)
-
-#define _CLK_DISABLE_PLL(name, r, g)					\
-static void name##_disable(struct clk *clk)				\
-{									\
-	__raw_writel(BM_CLKCTRL_##r##CTRL0_POWER,			\
-		     CLKCTRL_BASE_ADDR + HW_CLKCTRL_##r##CTRL0_CLR);	\
-									\
-	if (clk == &pll2_clk)						\
-		__raw_writel(BM_CLKCTRL_##r##CTRL0_##g,			\
-			CLKCTRL_BASE_ADDR + HW_CLKCTRL_##r##CTRL0_SET);	\
-	else								\
-		__raw_writel(BM_CLKCTRL_##r##CTRL0_##g,			\
-			CLKCTRL_BASE_ADDR + HW_CLKCTRL_##r##CTRL0_CLR);	\
-									\
-}
-
-_CLK_DISABLE_PLL(pll0_clk, PLL0, EN_USB_CLKS)
-_CLK_DISABLE_PLL(pll1_clk, PLL1, EN_USB_CLKS)
-_CLK_DISABLE_PLL(pll2_clk, PLL2, CLKGATE)
-
-#define _DEFINE_CLOCK_PLL(name)						\
-	static struct clk name = {					\
-		.get_rate	= name##_get_rate,			\
-		.enable		= name##_enable,			\
-		.disable	= name##_disable,			\
-		.parent		= &ref_xtal_clk,			\
-	}
-
-_DEFINE_CLOCK_PLL(pll0_clk);
-_DEFINE_CLOCK_PLL(pll1_clk);
-_DEFINE_CLOCK_PLL(pll2_clk);
-
-/*
- * ref_clk
- */
-#define _CLK_GET_RATE_REF(name, sr, ss)					\
-static unsigned long name##_get_rate(struct clk *clk)			\
-{									\
-	unsigned long parent_rate;					\
-	u32 reg, div;							\
-									\
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##sr);		\
-	div = (reg >> BP_CLKCTRL_##sr##_##ss##FRAC) & 0x3f;		\
-	parent_rate = clk_get_rate(clk->parent);			\
-									\
-	return SH_DIV((parent_rate >> PARENT_RATE_SHIFT) * 18,		\
-			div, PARENT_RATE_SHIFT);			\
-}
-
-_CLK_GET_RATE_REF(ref_cpu_clk, FRAC0, CPU)
-_CLK_GET_RATE_REF(ref_emi_clk, FRAC0, EMI)
-_CLK_GET_RATE_REF(ref_io0_clk, FRAC0, IO0)
-_CLK_GET_RATE_REF(ref_io1_clk, FRAC0, IO1)
-_CLK_GET_RATE_REF(ref_pix_clk, FRAC1, PIX)
-_CLK_GET_RATE_REF(ref_gpmi_clk, FRAC1, GPMI)
-
-#define _DEFINE_CLOCK_REF(name, er, es)					\
-	static struct clk name = {					\
-		.enable_reg	= CLKCTRL_BASE_ADDR + HW_CLKCTRL_##er,	\
-		.enable_shift	= BP_CLKCTRL_##er##_CLKGATE##es,	\
-		.get_rate	= name##_get_rate,			\
-		.enable		= _raw_clk_enable,			\
-		.disable	= _raw_clk_disable,			\
-		.parent		= &pll0_clk,				\
-	}
-
-_DEFINE_CLOCK_REF(ref_cpu_clk, FRAC0, CPU);
-_DEFINE_CLOCK_REF(ref_emi_clk, FRAC0, EMI);
-_DEFINE_CLOCK_REF(ref_io0_clk, FRAC0, IO0);
-_DEFINE_CLOCK_REF(ref_io1_clk, FRAC0, IO1);
-_DEFINE_CLOCK_REF(ref_pix_clk, FRAC1, PIX);
-_DEFINE_CLOCK_REF(ref_gpmi_clk, FRAC1, GPMI);
-
-/*
- * General clocks
- *
- * clk_get_rate
- */
-static unsigned long lradc_clk_get_rate(struct clk *clk)
-{
-	return clk_get_rate(clk->parent) / 16;
-}
-
-static unsigned long rtc_clk_get_rate(struct clk *clk)
-{
-	/* ref_xtal_clk is implemented as the only parent */
-	return clk_get_rate(clk->parent) / 768;
-}
-
-static unsigned long clk32k_clk_get_rate(struct clk *clk)
-{
-	return clk->parent->get_rate(clk->parent) / 750;
-}
-
-static unsigned long spdif_clk_get_rate(struct clk *clk)
-{
-	return clk_get_rate(clk->parent) / 4;
-}
-
-#define _CLK_GET_RATE(name, rs)						\
-static unsigned long name##_get_rate(struct clk *clk)			\
-{									\
-	u32 reg, div;							\
-									\
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs);		\
-									\
-	if (clk->parent == &ref_xtal_clk)				\
-		div = (reg & BM_CLKCTRL_##rs##_DIV_XTAL) >>		\
-			BP_CLKCTRL_##rs##_DIV_XTAL;			\
-	else								\
-		div = (reg & BM_CLKCTRL_##rs##_DIV_##rs) >>		\
-			BP_CLKCTRL_##rs##_DIV_##rs;			\
-									\
-	if (!div)							\
-		return -EINVAL;						\
-									\
-	return clk_get_rate(clk->parent) / div;				\
-}
-
-_CLK_GET_RATE(cpu_clk, CPU)
-_CLK_GET_RATE(emi_clk, EMI)
-
-#define _CLK_GET_RATE1(name, rs)					\
-static unsigned long name##_get_rate(struct clk *clk)			\
-{									\
-	u32 reg, div;							\
-									\
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs);		\
-	div = (reg & BM_CLKCTRL_##rs##_DIV) >> BP_CLKCTRL_##rs##_DIV;	\
-									\
-	if (!div)							\
-		return -EINVAL;						\
-									\
-	if (clk == &saif0_clk || clk == &saif1_clk)			\
-		return clk_get_rate(clk->parent) >> 16 * div;		\
-	else								\
-		return clk_get_rate(clk->parent) / div;			\
-}
-
-_CLK_GET_RATE1(hbus_clk, HBUS)
-_CLK_GET_RATE1(xbus_clk, XBUS)
-_CLK_GET_RATE1(ssp0_clk, SSP0)
-_CLK_GET_RATE1(ssp1_clk, SSP1)
-_CLK_GET_RATE1(ssp2_clk, SSP2)
-_CLK_GET_RATE1(ssp3_clk, SSP3)
-_CLK_GET_RATE1(gpmi_clk, GPMI)
-_CLK_GET_RATE1(lcdif_clk, DIS_LCDIF)
-_CLK_GET_RATE1(saif0_clk, SAIF0)
-_CLK_GET_RATE1(saif1_clk, SAIF1)
-
-#define _CLK_GET_RATE_STUB(name)					\
-static unsigned long name##_get_rate(struct clk *clk)			\
-{									\
-	return clk_get_rate(clk->parent);				\
-}
-
-_CLK_GET_RATE_STUB(uart_clk)
-_CLK_GET_RATE_STUB(pwm_clk)
-_CLK_GET_RATE_STUB(can0_clk)
-_CLK_GET_RATE_STUB(can1_clk)
-_CLK_GET_RATE_STUB(fec_clk)
-
-/*
- * clk_set_rate
- */
-/* fool compiler */
-#define BM_CLKCTRL_CPU_DIV	0
-#define BP_CLKCTRL_CPU_DIV	0
-#define BM_CLKCTRL_CPU_BUSY	0
-
-#define _CLK_SET_RATE(name, dr, fr, fs)					\
-static int name##_set_rate(struct clk *clk, unsigned long rate)		\
-{									\
-	u32 reg, bm_busy, div_max, d, f, div, frac;			\
-	unsigned long diff, parent_rate, calc_rate;			\
-									\
-	div_max = BM_CLKCTRL_##dr##_DIV >> BP_CLKCTRL_##dr##_DIV;	\
-	bm_busy = BM_CLKCTRL_##dr##_BUSY;				\
-									\
-	if (clk->parent == &ref_xtal_clk) {				\
-		parent_rate = clk_get_rate(clk->parent);		\
-		div = DIV_ROUND_UP(parent_rate, rate);			\
-		if (clk == &cpu_clk) {					\
-			div_max = BM_CLKCTRL_CPU_DIV_XTAL >>		\
-				BP_CLKCTRL_CPU_DIV_XTAL;		\
-			bm_busy = BM_CLKCTRL_CPU_BUSY_REF_XTAL;		\
-		}							\
-		if (div == 0 || div > div_max)				\
-			return -EINVAL;					\
-	} else {							\
-		/*							\
-		 * hack alert: this block modifies clk->parent, too,	\
-		 * so the base to use it the grand parent.		\
-		 */							\
-		parent_rate = clk_get_rate(clk->parent->parent);	\
-		rate >>= PARENT_RATE_SHIFT;				\
-		parent_rate >>= PARENT_RATE_SHIFT;			\
-		diff = parent_rate;					\
-		div = frac = 1;						\
-		if (clk == &cpu_clk) {					\
-			div_max = BM_CLKCTRL_CPU_DIV_CPU >>		\
-				BP_CLKCTRL_CPU_DIV_CPU;			\
-			bm_busy = BM_CLKCTRL_CPU_BUSY_REF_CPU;		\
-		}							\
-		for (d = 1; d <= div_max; d++) {			\
-			f = parent_rate * 18 / d / rate;		\
-			if ((parent_rate * 18 / d) % rate)		\
-				f++;					\
-			if (f < 18 || f > 35)				\
-				continue;				\
-									\
-			calc_rate = parent_rate * 18 / f / d;		\
-			if (calc_rate > rate)				\
-				continue;				\
-									\
-			if (rate - calc_rate < diff) {			\
-				frac = f;				\
-				div = d;				\
-				diff = rate - calc_rate;		\
-			}						\
-									\
-			if (diff == 0)					\
-				break;					\
-		}							\
-									\
-		if (diff == parent_rate)				\
-			return -EINVAL;					\
-									\
-		reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##fr);	\
-		reg &= ~BM_CLKCTRL_##fr##_##fs##FRAC;			\
-		reg |= frac << BP_CLKCTRL_##fr##_##fs##FRAC;		\
-		__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##fr);	\
-	}								\
-									\
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr);		\
-	if (clk == &cpu_clk) {						\
-		reg &= ~BM_CLKCTRL_CPU_DIV_CPU;				\
-		reg |= div << BP_CLKCTRL_CPU_DIV_CPU;			\
-	} else {							\
-		reg &= ~BM_CLKCTRL_##dr##_DIV;				\
-		reg |= div << BP_CLKCTRL_##dr##_DIV;			\
-		if (reg & (1 << clk->enable_shift)) {			\
-			pr_err("%s: clock is gated\n", __func__);	\
-			return -EINVAL;					\
-		}							\
-	}								\
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr);		\
-									\
-	return mxs_clkctrl_timeout(HW_CLKCTRL_##dr, bm_busy);		\
-}
-
-_CLK_SET_RATE(cpu_clk, CPU, FRAC0, CPU)
-_CLK_SET_RATE(ssp0_clk, SSP0, FRAC0, IO0)
-_CLK_SET_RATE(ssp1_clk, SSP1, FRAC0, IO0)
-_CLK_SET_RATE(ssp2_clk, SSP2, FRAC0, IO1)
-_CLK_SET_RATE(ssp3_clk, SSP3, FRAC0, IO1)
-_CLK_SET_RATE(lcdif_clk, DIS_LCDIF, FRAC1, PIX)
-_CLK_SET_RATE(gpmi_clk, GPMI, FRAC1, GPMI)
-
-#define _CLK_SET_RATE1(name, dr)					\
-static int name##_set_rate(struct clk *clk, unsigned long rate)		\
-{									\
-	u32 reg, div_max, div;						\
-	unsigned long parent_rate;					\
-									\
-	parent_rate = clk_get_rate(clk->parent);			\
-	div_max = BM_CLKCTRL_##dr##_DIV >> BP_CLKCTRL_##dr##_DIV;	\
-									\
-	div = DIV_ROUND_UP(parent_rate, rate);				\
-	if (div == 0 || div > div_max)					\
-		return -EINVAL;						\
-									\
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr);		\
-	reg &= ~BM_CLKCTRL_##dr##_DIV;					\
-	reg |= div << BP_CLKCTRL_##dr##_DIV;				\
-	if (reg & (1 << clk->enable_shift)) {				\
-		pr_err("%s: clock is gated\n", __func__);		\
-		return -EINVAL;						\
-	}								\
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr);		\
-									\
-	return mxs_clkctrl_timeout(HW_CLKCTRL_##dr, BM_CLKCTRL_##dr##_BUSY);\
-}
-
-_CLK_SET_RATE1(xbus_clk, XBUS)
-
-/* saif clock uses 16 bits frac div */
-#define _CLK_SET_RATE_SAIF(name, rs)					\
-static int name##_set_rate(struct clk *clk, unsigned long rate)		\
-{									\
-	u16 div;							\
-	u32 reg;							\
-	u64 lrate;							\
-	unsigned long parent_rate;					\
-									\
-	parent_rate = clk_get_rate(clk->parent);			\
-	if (rate > parent_rate)						\
-		return -EINVAL;						\
-									\
-	lrate = (u64)rate << 16;					\
-	do_div(lrate, parent_rate);					\
-	div = (u16)lrate;						\
-									\
-	if (!div)							\
-		return -EINVAL;						\
-									\
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs);		\
-	reg &= ~BM_CLKCTRL_##rs##_DIV;					\
-	reg |= div << BP_CLKCTRL_##rs##_DIV;				\
-	if (reg & (1 << clk->enable_shift)) {				\
-		pr_err("%s: clock is gated\n", __func__);		\
-		return -EINVAL;						\
-	}								\
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs);		\
-									\
-	return mxs_clkctrl_timeout(HW_CLKCTRL_##rs, BM_CLKCTRL_##rs##_BUSY);\
-}
-
-_CLK_SET_RATE_SAIF(saif0_clk, SAIF0)
-_CLK_SET_RATE_SAIF(saif1_clk, SAIF1)
-
-#define _CLK_SET_RATE_STUB(name)					\
-static int name##_set_rate(struct clk *clk, unsigned long rate)		\
-{									\
-	return -EINVAL;							\
-}
-
-_CLK_SET_RATE_STUB(emi_clk)
-_CLK_SET_RATE_STUB(uart_clk)
-_CLK_SET_RATE_STUB(pwm_clk)
-_CLK_SET_RATE_STUB(spdif_clk)
-_CLK_SET_RATE_STUB(clk32k_clk)
-_CLK_SET_RATE_STUB(can0_clk)
-_CLK_SET_RATE_STUB(can1_clk)
-_CLK_SET_RATE_STUB(fec_clk)
-
-/*
- * clk_set_parent
- */
-#define _CLK_SET_PARENT(name, bit)					\
-static int name##_set_parent(struct clk *clk, struct clk *parent)	\
-{									\
-	if (parent != clk->parent) {					\
-		__raw_writel(BM_CLKCTRL_CLKSEQ_BYPASS_##bit,		\
-			 CLKCTRL_BASE_ADDR + HW_CLKCTRL_CLKSEQ_TOG);	\
-		clk->parent = parent;					\
-	}								\
-									\
-	return 0;							\
-}
-
-_CLK_SET_PARENT(cpu_clk, CPU)
-_CLK_SET_PARENT(emi_clk, EMI)
-_CLK_SET_PARENT(ssp0_clk, SSP0)
-_CLK_SET_PARENT(ssp1_clk, SSP1)
-_CLK_SET_PARENT(ssp2_clk, SSP2)
-_CLK_SET_PARENT(ssp3_clk, SSP3)
-_CLK_SET_PARENT(lcdif_clk, DIS_LCDIF)
-_CLK_SET_PARENT(gpmi_clk, GPMI)
-_CLK_SET_PARENT(saif0_clk, SAIF0)
-_CLK_SET_PARENT(saif1_clk, SAIF1)
-
-#define _CLK_SET_PARENT_STUB(name)					\
-static int name##_set_parent(struct clk *clk, struct clk *parent)	\
-{									\
-	if (parent != clk->parent)					\
-		return -EINVAL;						\
-	else								\
-		return 0;						\
-}
-
-_CLK_SET_PARENT_STUB(pwm_clk)
-_CLK_SET_PARENT_STUB(uart_clk)
-_CLK_SET_PARENT_STUB(clk32k_clk)
-_CLK_SET_PARENT_STUB(spdif_clk)
-_CLK_SET_PARENT_STUB(fec_clk)
-_CLK_SET_PARENT_STUB(can0_clk)
-_CLK_SET_PARENT_STUB(can1_clk)
-
-/*
- * clk definition
- */
-static struct clk cpu_clk = {
-	.get_rate = cpu_clk_get_rate,
-	.set_rate = cpu_clk_set_rate,
-	.set_parent = cpu_clk_set_parent,
-	.parent = &ref_cpu_clk,
-};
-
-static struct clk hbus_clk = {
-	.get_rate = hbus_clk_get_rate,
-	.parent = &cpu_clk,
-};
-
-static struct clk xbus_clk = {
-	.get_rate = xbus_clk_get_rate,
-	.set_rate = xbus_clk_set_rate,
-	.parent = &ref_xtal_clk,
-};
-
-static struct clk lradc_clk = {
-	.get_rate = lradc_clk_get_rate,
-	.parent = &clk32k_clk,
-};
-
-static struct clk rtc_clk = {
-	.get_rate = rtc_clk_get_rate,
-	.parent = &ref_xtal_clk,
-};
-
-/* usb_clk gate is controlled in DIGCTRL other than CLKCTRL */
-static struct clk usb0_clk = {
-	.enable_reg = DIGCTRL_BASE_ADDR,
-	.enable_shift = 2,
-	.enable = _raw_clk_enable,
-	.disable = _raw_clk_disable,
-	.parent = &pll0_clk,
-};
-
-static struct clk usb1_clk = {
-	.enable_reg = DIGCTRL_BASE_ADDR,
-	.enable_shift = 16,
-	.enable = _raw_clk_enable,
-	.disable = _raw_clk_disable,
-	.parent = &pll1_clk,
-};
-
-#define _DEFINE_CLOCK(name, er, es, p)					\
-	static struct clk name = {					\
-		.enable_reg	= CLKCTRL_BASE_ADDR + HW_CLKCTRL_##er,	\
-		.enable_shift	= BP_CLKCTRL_##er##_##es,		\
-		.get_rate	= name##_get_rate,			\
-		.set_rate	= name##_set_rate,			\
-		.set_parent	= name##_set_parent,			\
-		.enable		= _raw_clk_enable,			\
-		.disable	= _raw_clk_disable,			\
-		.parent		= p,					\
-	}
-
-_DEFINE_CLOCK(emi_clk, EMI, CLKGATE, &ref_xtal_clk);
-_DEFINE_CLOCK(ssp0_clk, SSP0, CLKGATE, &ref_xtal_clk);
-_DEFINE_CLOCK(ssp1_clk, SSP1, CLKGATE, &ref_xtal_clk);
-_DEFINE_CLOCK(ssp2_clk, SSP2, CLKGATE, &ref_xtal_clk);
-_DEFINE_CLOCK(ssp3_clk, SSP3, CLKGATE, &ref_xtal_clk);
-_DEFINE_CLOCK(lcdif_clk, DIS_LCDIF, CLKGATE, &ref_xtal_clk);
-_DEFINE_CLOCK(gpmi_clk, GPMI, CLKGATE, &ref_xtal_clk);
-_DEFINE_CLOCK(saif0_clk, SAIF0, CLKGATE, &ref_xtal_clk);
-_DEFINE_CLOCK(saif1_clk, SAIF1, CLKGATE, &ref_xtal_clk);
-_DEFINE_CLOCK(can0_clk, FLEXCAN, STOP_CAN0, &ref_xtal_clk);
-_DEFINE_CLOCK(can1_clk, FLEXCAN, STOP_CAN1, &ref_xtal_clk);
-_DEFINE_CLOCK(pwm_clk, XTAL, PWM_CLK24M_GATE, &ref_xtal_clk);
-_DEFINE_CLOCK(uart_clk, XTAL, UART_CLK_GATE, &ref_xtal_clk);
-_DEFINE_CLOCK(clk32k_clk, XTAL, TIMROT_CLK32K_GATE, &ref_xtal_clk);
-_DEFINE_CLOCK(spdif_clk, SPDIF, CLKGATE, &pll0_clk);
-_DEFINE_CLOCK(fec_clk, ENET, DISABLE, &hbus_clk);
-
-#define _REGISTER_CLOCK(d, n, c) \
-	{ \
-		.dev_id = d, \
-		.con_id = n, \
-		.clk = &c, \
-	},
-
-static struct clk_lookup lookups[] = {
-	/* for amba bus driver */
-	_REGISTER_CLOCK("duart", "apb_pclk", xbus_clk)
-	/* for amba-pl011 driver */
-	_REGISTER_CLOCK("duart", NULL, uart_clk)
-	_REGISTER_CLOCK("imx28-fec.0", NULL, fec_clk)
-	_REGISTER_CLOCK("imx28-fec.1", NULL, fec_clk)
-	_REGISTER_CLOCK("imx28-gpmi-nand", NULL, gpmi_clk)
-	_REGISTER_CLOCK("mxs-auart.0", NULL, uart_clk)
-	_REGISTER_CLOCK("mxs-auart.1", NULL, uart_clk)
-	_REGISTER_CLOCK("mxs-auart.2", NULL, uart_clk)
-	_REGISTER_CLOCK("mxs-auart.3", NULL, uart_clk)
-	_REGISTER_CLOCK("mxs-auart.4", NULL, uart_clk)
-	_REGISTER_CLOCK("rtc", NULL, rtc_clk)
-	_REGISTER_CLOCK("pll2", NULL, pll2_clk)
-	_REGISTER_CLOCK("mxs-dma-apbh", NULL, hbus_clk)
-	_REGISTER_CLOCK("mxs-dma-apbx", NULL, xbus_clk)
-	_REGISTER_CLOCK("mxs-mmc.0", NULL, ssp0_clk)
-	_REGISTER_CLOCK("mxs-mmc.1", NULL, ssp1_clk)
-	_REGISTER_CLOCK("mxs-mmc.2", NULL, ssp2_clk)
-	_REGISTER_CLOCK("mxs-mmc.3", NULL, ssp3_clk)
-	_REGISTER_CLOCK("flexcan.0", NULL, can0_clk)
-	_REGISTER_CLOCK("flexcan.1", NULL, can1_clk)
-	_REGISTER_CLOCK(NULL, "usb0", usb0_clk)
-	_REGISTER_CLOCK(NULL, "usb1", usb1_clk)
-	_REGISTER_CLOCK("mxs-pwm.0", NULL, pwm_clk)
-	_REGISTER_CLOCK("mxs-pwm.1", NULL, pwm_clk)
-	_REGISTER_CLOCK("mxs-pwm.2", NULL, pwm_clk)
-	_REGISTER_CLOCK("mxs-pwm.3", NULL, pwm_clk)
-	_REGISTER_CLOCK("mxs-pwm.4", NULL, pwm_clk)
-	_REGISTER_CLOCK("mxs-pwm.5", NULL, pwm_clk)
-	_REGISTER_CLOCK("mxs-pwm.6", NULL, pwm_clk)
-	_REGISTER_CLOCK("mxs-pwm.7", NULL, pwm_clk)
-	_REGISTER_CLOCK(NULL, "lradc", lradc_clk)
-	_REGISTER_CLOCK(NULL, "spdif", spdif_clk)
-	_REGISTER_CLOCK("imx28-fb", NULL, lcdif_clk)
-	_REGISTER_CLOCK("mxs-saif.0", NULL, saif0_clk)
-	_REGISTER_CLOCK("mxs-saif.1", NULL, saif1_clk)
-};
-
-static int clk_misc_init(void)
-{
-	u32 reg;
-	int ret;
-
-	/* Fix up parent per register setting */
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_CLKSEQ);
-	cpu_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_CPU) ?
-			&ref_xtal_clk : &ref_cpu_clk;
-	emi_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_EMI) ?
-			&ref_xtal_clk : &ref_emi_clk;
-	ssp0_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_SSP0) ?
-			&ref_xtal_clk : &ref_io0_clk;
-	ssp1_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_SSP1) ?
-			&ref_xtal_clk : &ref_io0_clk;
-	ssp2_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_SSP2) ?
-			&ref_xtal_clk : &ref_io1_clk;
-	ssp3_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_SSP3) ?
-			&ref_xtal_clk : &ref_io1_clk;
-	lcdif_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF) ?
-			&ref_xtal_clk : &ref_pix_clk;
-	gpmi_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_GPMI) ?
-			&ref_xtal_clk : &ref_gpmi_clk;
-	saif0_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_SAIF0) ?
-			&ref_xtal_clk : &pll0_clk;
-	saif1_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_SAIF1) ?
-			&ref_xtal_clk : &pll0_clk;
-
-	/* Use int div over frac when both are available */
-	__raw_writel(BM_CLKCTRL_CPU_DIV_XTAL_FRAC_EN,
-			CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_CLR);
-	__raw_writel(BM_CLKCTRL_CPU_DIV_CPU_FRAC_EN,
-			CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_CLR);
-	__raw_writel(BM_CLKCTRL_HBUS_DIV_FRAC_EN,
-			CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS_CLR);
-
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_XBUS);
-	reg &= ~BM_CLKCTRL_XBUS_DIV_FRAC_EN;
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_XBUS);
-
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP0);
-	reg &= ~BM_CLKCTRL_SSP0_DIV_FRAC_EN;
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP0);
-
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP1);
-	reg &= ~BM_CLKCTRL_SSP1_DIV_FRAC_EN;
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP1);
-
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP2);
-	reg &= ~BM_CLKCTRL_SSP2_DIV_FRAC_EN;
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP2);
-
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP3);
-	reg &= ~BM_CLKCTRL_SSP3_DIV_FRAC_EN;
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP3);
-
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_GPMI);
-	reg &= ~BM_CLKCTRL_GPMI_DIV_FRAC_EN;
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_GPMI);
-
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_DIS_LCDIF);
-	reg &= ~BM_CLKCTRL_DIS_LCDIF_DIV_FRAC_EN;
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_DIS_LCDIF);
-
-	/* SAIF has to use frac div for functional operation */
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SAIF0);
-	reg |= BM_CLKCTRL_SAIF0_DIV_FRAC_EN;
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SAIF0);
-
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SAIF1);
-	reg |= BM_CLKCTRL_SAIF1_DIV_FRAC_EN;
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SAIF1);
-
-	/*
-	 * Set safe hbus clock divider. A divider of 3 ensure that
-	 * the Vddd voltage required for the cpu clock is sufficiently
-	 * high for the hbus clock.
-	 */
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS);
-	reg &= BM_CLKCTRL_HBUS_DIV;
-	reg |= 3 << BP_CLKCTRL_HBUS_DIV;
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS);
-
-	ret = mxs_clkctrl_timeout(HW_CLKCTRL_HBUS, BM_CLKCTRL_HBUS_ASM_BUSY);
-
-	/* Gate off cpu clock in WFI for power saving */
-	__raw_writel(BM_CLKCTRL_CPU_INTERRUPT_WAIT,
-			CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_SET);
-
-	/*
-	 * Extra fec clock setting
-	 * The DENX M28 uses an external clock source
-	 * and the clock output must not be enabled
-	 */
-	if (!machine_is_m28evk()) {
-		reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET);
-		reg &= ~BM_CLKCTRL_ENET_SLEEP;
-		reg |= BM_CLKCTRL_ENET_CLK_OUT_EN;
-		__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET);
-	}
-
-	/*
-	 * 480 MHz seems too high to be ssp clock source directly,
-	 * so set frac0 to get a 288 MHz ref_io0.
-	 */
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC0);
-	reg &= ~BM_CLKCTRL_FRAC0_IO0FRAC;
-	reg |= 30 << BP_CLKCTRL_FRAC0_IO0FRAC;
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC0);
-
-	return ret;
-}
-
-int __init mx28_clocks_init(void)
-{
-	clk_misc_init();
-
-	/*
-	 * source ssp clock from ref_io0 than ref_xtal,
-	 * as ref_xtal only provides 24 MHz as maximum.
-	 */
-	clk_set_parent(&ssp0_clk, &ref_io0_clk);
-	clk_set_parent(&ssp1_clk, &ref_io0_clk);
-	clk_set_parent(&ssp2_clk, &ref_io1_clk);
-	clk_set_parent(&ssp3_clk, &ref_io1_clk);
-
-	clk_prepare_enable(&cpu_clk);
-	clk_prepare_enable(&hbus_clk);
-	clk_prepare_enable(&xbus_clk);
-	clk_prepare_enable(&emi_clk);
-	clk_prepare_enable(&uart_clk);
-
-	clk_set_parent(&lcdif_clk, &ref_pix_clk);
-	clk_set_parent(&saif0_clk, &pll0_clk);
-	clk_set_parent(&saif1_clk, &pll0_clk);
-
-	/*
-	 * Set an initial clock rate for the saif internal logic to work
-	 * properly. This is important when working in EXTMASTER mode that
-	 * uses the other saif's BITCLK&LRCLK but it still needs a basic
-	 * clock which should be fast enough for the internal logic.
-	 */
-	clk_set_rate(&saif0_clk, 24000000);
-	clk_set_rate(&saif1_clk, 24000000);
-
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
-	mxs_timer_init(&clk32k_clk, MX28_INT_TIMER0);
-
-	return 0;
-}
diff --git a/arch/arm/mach-mxs/clock.c b/arch/arm/mach-mxs/clock.c
deleted file mode 100644
index 97a6f4acc6cc..000000000000
--- a/arch/arm/mach-mxs/clock.c
+++ /dev/null
@@ -1,211 +0,0 @@
-/*
- * Based on arch/arm/plat-omap/clock.c
- *
- * Copyright (C) 2004 - 2005 Nokia corporation
- * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
- * Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com>
- * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA  02110-1301, USA.
- */
-
-/* #define DEBUG */
-
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/platform_device.h>
-#include <linux/proc_fs.h>
-#include <linux/semaphore.h>
-#include <linux/string.h>
-
-#include <mach/clock.h>
-
-static LIST_HEAD(clocks);
-static DEFINE_MUTEX(clocks_mutex);
-
-/*-------------------------------------------------------------------------
- * Standard clock functions defined in include/linux/clk.h
- *-------------------------------------------------------------------------*/
-
-static void __clk_disable(struct clk *clk)
-{
-	if (clk == NULL || IS_ERR(clk))
-		return;
-	WARN_ON(!clk->usecount);
-
-	if (!(--clk->usecount)) {
-		if (clk->disable)
-			clk->disable(clk);
-		__clk_disable(clk->parent);
-	}
-}
-
-static int __clk_enable(struct clk *clk)
-{
-	if (clk == NULL || IS_ERR(clk))
-		return -EINVAL;
-
-	if (clk->usecount++ == 0) {
-		__clk_enable(clk->parent);
-
-		if (clk->enable)
-			clk->enable(clk);
-	}
-	return 0;
-}
-
-/*
- * The clk_enable/clk_disable could be called by drivers in atomic context,
- * so they should not really hold mutex.  Instead, clk_prepare/clk_unprepare
- * can hold a mutex, as the pair will only be called in non-atomic context.
- * Before migrating to common clk framework, we can have __clk_enable and
- * __clk_disable called in clk_prepare/clk_unprepare with mutex held and
- * leave clk_enable/clk_disable as the dummy functions.
- */
-int clk_prepare(struct clk *clk)
-{
-	int ret = 0;
-
-	if (clk == NULL || IS_ERR(clk))
-		return -EINVAL;
-
-	mutex_lock(&clocks_mutex);
-	ret = __clk_enable(clk);
-	mutex_unlock(&clocks_mutex);
-
-	return ret;
-}
-EXPORT_SYMBOL(clk_prepare);
-
-void clk_unprepare(struct clk *clk)
-{
-	if (clk == NULL || IS_ERR(clk))
-		return;
-
-	mutex_lock(&clocks_mutex);
-	__clk_disable(clk);
-	mutex_unlock(&clocks_mutex);
-}
-EXPORT_SYMBOL(clk_unprepare);
-
-int clk_enable(struct clk *clk)
-{
-	return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-	/* nothing to do */
-}
-EXPORT_SYMBOL(clk_disable);
-
-/* Retrieve the *current* clock rate. If the clock itself
- * does not provide a special calculation routine, ask
- * its parent and so on, until one is able to return
- * a valid clock rate
- */
-unsigned long clk_get_rate(struct clk *clk)
-{
-	if (clk == NULL || IS_ERR(clk))
-		return 0UL;
-
-	if (clk->get_rate)
-		return clk->get_rate(clk);
-
-	return clk_get_rate(clk->parent);
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-/* Round the requested clock rate to the nearest supported
- * rate that is less than or equal to the requested rate.
- * This is dependent on the clock's current parent.
- */
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	if (clk == NULL || IS_ERR(clk) || !clk->round_rate)
-		return 0;
-
-	return clk->round_rate(clk, rate);
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-/* Set the clock to the requested clock rate. The rate must
- * match a supported rate exactly based on what clk_round_rate returns
- */
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	int ret = -EINVAL;
-
-	if (clk == NULL || IS_ERR(clk) || clk->set_rate == NULL || rate == 0)
-		return ret;
-
-	mutex_lock(&clocks_mutex);
-	ret = clk->set_rate(clk, rate);
-	mutex_unlock(&clocks_mutex);
-
-	return ret;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-/* Set the clock's parent to another clock source */
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
-	int ret = -EINVAL;
-	struct clk *old;
-
-	if (clk == NULL || IS_ERR(clk) || parent == NULL ||
-	    IS_ERR(parent) || clk->set_parent == NULL)
-		return ret;
-
-	if (clk->usecount)
-		clk_prepare_enable(parent);
-
-	mutex_lock(&clocks_mutex);
-	ret = clk->set_parent(clk, parent);
-	if (ret == 0) {
-		old = clk->parent;
-		clk->parent = parent;
-	} else {
-		old = parent;
-	}
-	mutex_unlock(&clocks_mutex);
-
-	if (clk->usecount)
-		clk_disable(old);
-
-	return ret;
-}
-EXPORT_SYMBOL(clk_set_parent);
-
-/* Retrieve the clock's parent clock source */
-struct clk *clk_get_parent(struct clk *clk)
-{
-	struct clk *ret = NULL;
-
-	if (clk == NULL || IS_ERR(clk))
-		return ret;
-
-	return clk->parent;
-}
-EXPORT_SYMBOL(clk_get_parent);
diff --git a/arch/arm/mach-mxs/devices-mx23.h b/arch/arm/mach-mxs/devices-mx23.h
index 4d1329d59287..9acdd6387047 100644
--- a/arch/arm/mach-mxs/devices-mx23.h
+++ b/arch/arm/mach-mxs/devices-mx23.h
@@ -11,10 +11,16 @@
 #include <mach/mx23.h>
 #include <mach/devices-common.h>
 #include <mach/mxsfb.h>
+#include <linux/amba/bus.h>
 
-extern const struct amba_device mx23_duart_device __initconst;
-#define mx23_add_duart() \
-	mxs_add_duart(&mx23_duart_device)
+static inline int mx23_add_duart(void)
+{
+	struct amba_device *d;
+
+	d = amba_ahb_device_add(NULL, "duart", MX23_DUART_BASE_ADDR, SZ_8K,
+				MX23_INT_DUART, 0, 0, 0);
+	return IS_ERR(d) ? PTR_ERR(d) : 0;
+}
 
 extern const struct mxs_auart_data mx23_auart_data[] __initconst;
 #define mx23_add_auart(id)	mxs_add_auart(&mx23_auart_data[id])
diff --git a/arch/arm/mach-mxs/devices-mx28.h b/arch/arm/mach-mxs/devices-mx28.h
index 9dbeae130842..84b2960df117 100644
--- a/arch/arm/mach-mxs/devices-mx28.h
+++ b/arch/arm/mach-mxs/devices-mx28.h
@@ -11,10 +11,16 @@
 #include <mach/mx28.h>
 #include <mach/devices-common.h>
 #include <mach/mxsfb.h>
+#include <linux/amba/bus.h>
 
-extern const struct amba_device mx28_duart_device __initconst;
-#define mx28_add_duart() \
-	mxs_add_duart(&mx28_duart_device)
+static inline int mx28_add_duart(void)
+{
+	struct amba_device *d;
+
+	d = amba_ahb_device_add(NULL, "duart", MX28_DUART_BASE_ADDR, SZ_8K,
+				MX28_INT_DUART, 0, 0, 0);
+	return IS_ERR(d) ? PTR_ERR(d) : 0;
+}
 
 extern const struct mxs_auart_data mx28_auart_data[] __initconst;
 #define mx28_add_auart(id)	mxs_add_auart(&mx28_auart_data[id])
diff --git a/arch/arm/mach-mxs/devices.c b/arch/arm/mach-mxs/devices.c
index 01faffec3064..cf50b5a66dda 100644
--- a/arch/arm/mach-mxs/devices.c
+++ b/arch/arm/mach-mxs/devices.c
@@ -75,22 +75,6 @@ err:
 	return pdev;
 }
 
-int __init mxs_add_amba_device(const struct amba_device *dev)
-{
-	struct amba_device *adev = amba_device_alloc(dev->dev.init_name,
-		dev->res.start, resource_size(&dev->res));
-
-	if (!adev) {
-		pr_err("%s: failed to allocate memory", __func__);
-		return -ENOMEM;
-	}
-
-	adev->irq[0] = dev->irq[0];
-	adev->irq[1] = dev->irq[1];
-
-	return amba_device_add(adev, &iomem_resource);
-}
-
 struct device mxs_apbh_bus = {
 	.init_name	= "mxs_apbh",
 	.parent         = &platform_bus,
diff --git a/arch/arm/mach-mxs/devices/Kconfig b/arch/arm/mach-mxs/devices/Kconfig
index b8913df4cfa2..19659de1c4e8 100644
--- a/arch/arm/mach-mxs/devices/Kconfig
+++ b/arch/arm/mach-mxs/devices/Kconfig
@@ -1,6 +1,5 @@
 config MXS_HAVE_AMBA_DUART
 	bool
-	select ARM_AMBA
 
 config MXS_HAVE_PLATFORM_AUART
 	bool
diff --git a/arch/arm/mach-mxs/devices/Makefile b/arch/arm/mach-mxs/devices/Makefile
index c8f5c9541a30..5f72d9787444 100644
--- a/arch/arm/mach-mxs/devices/Makefile
+++ b/arch/arm/mach-mxs/devices/Makefile
@@ -1,4 +1,3 @@
-obj-$(CONFIG_MXS_HAVE_AMBA_DUART) += amba-duart.o
 obj-$(CONFIG_MXS_HAVE_PLATFORM_AUART) += platform-auart.o
 obj-y += platform-dma.o
 obj-$(CONFIG_MXS_HAVE_PLATFORM_FEC) += platform-fec.o
diff --git a/arch/arm/mach-mxs/devices/amba-duart.c b/arch/arm/mach-mxs/devices/amba-duart.c
deleted file mode 100644
index a5479f766046..000000000000
--- a/arch/arm/mach-mxs/devices/amba-duart.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <asm/irq.h>
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-
-#define MXS_AMBA_DUART_DEVICE(name, soc)			\
-const struct amba_device name##_device __initconst = {		\
-	.dev = {						\
-		.init_name = "duart",				\
-	},							\
-	.res = {						\
-		.start = soc ## _DUART_BASE_ADDR,		\
-		.end = (soc ## _DUART_BASE_ADDR) + SZ_8K - 1,	\
-		.flags = IORESOURCE_MEM,			\
-	},							\
-	.irq = {soc ## _INT_DUART},				\
-}
-
-#ifdef CONFIG_SOC_IMX23
-MXS_AMBA_DUART_DEVICE(mx23_duart, MX23);
-#endif
-
-#ifdef CONFIG_SOC_IMX28
-MXS_AMBA_DUART_DEVICE(mx28_duart, MX28);
-#endif
-
-int __init mxs_add_duart(const struct amba_device *dev)
-{
-	return mxs_add_amba_device(dev);
-}
diff --git a/arch/arm/mach-mxs/devices/platform-dma.c b/arch/arm/mach-mxs/devices/platform-dma.c
index 6a0202b1016c..46824501de00 100644
--- a/arch/arm/mach-mxs/devices/platform-dma.c
+++ b/arch/arm/mach-mxs/devices/platform-dma.c
@@ -14,7 +14,7 @@
 #include <mach/mx28.h>
 #include <mach/devices-common.h>
 
-static struct platform_device *__init mxs_add_dma(const char *devid,
+struct platform_device *__init mxs_add_dma(const char *devid,
 						resource_size_t base)
 {
 	struct resource res[] = {
@@ -29,22 +29,3 @@ static struct platform_device *__init mxs_add_dma(const char *devid,
 				res, ARRAY_SIZE(res), NULL, 0,
 				DMA_BIT_MASK(32));
 }
-
-static int __init mxs_add_mxs_dma(void)
-{
-	char *apbh = "mxs-dma-apbh";
-	char *apbx = "mxs-dma-apbx";
-
-	if (cpu_is_mx23()) {
-		mxs_add_dma(apbh, MX23_APBH_DMA_BASE_ADDR);
-		mxs_add_dma(apbx, MX23_APBX_DMA_BASE_ADDR);
-	}
-
-	if (cpu_is_mx28()) {
-		mxs_add_dma(apbh, MX28_APBH_DMA_BASE_ADDR);
-		mxs_add_dma(apbx, MX28_APBX_DMA_BASE_ADDR);
-	}
-
-	return 0;
-}
-arch_initcall(mxs_add_mxs_dma);
diff --git a/arch/arm/mach-mxs/devices/platform-gpio-mxs.c b/arch/arm/mach-mxs/devices/platform-gpio-mxs.c
index ed0885e414e0..cd99f19ec637 100644
--- a/arch/arm/mach-mxs/devices/platform-gpio-mxs.c
+++ b/arch/arm/mach-mxs/devices/platform-gpio-mxs.c
@@ -14,7 +14,7 @@
 #include <mach/devices-common.h>
 
 struct platform_device *__init mxs_add_gpio(
-	int id, resource_size_t iobase, int irq)
+	char *name, int id, resource_size_t iobase, int irq)
 {
 	struct resource res[] = {
 		{
@@ -29,25 +29,5 @@ struct platform_device *__init mxs_add_gpio(
 	};
 
 	return platform_device_register_resndata(&mxs_apbh_bus,
-			"gpio-mxs", id, res, ARRAY_SIZE(res), NULL, 0);
+			name, id, res, ARRAY_SIZE(res), NULL, 0);
 }
-
-static int __init mxs_add_mxs_gpio(void)
-{
-	if (cpu_is_mx23()) {
-		mxs_add_gpio(0, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO0);
-		mxs_add_gpio(1, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO1);
-		mxs_add_gpio(2, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO2);
-	}
-
-	if (cpu_is_mx28()) {
-		mxs_add_gpio(0, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO0);
-		mxs_add_gpio(1, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO1);
-		mxs_add_gpio(2, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO2);
-		mxs_add_gpio(3, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO3);
-		mxs_add_gpio(4, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO4);
-	}
-
-	return 0;
-}
-postcore_initcall(mxs_add_mxs_gpio);
diff --git a/arch/arm/mach-mxs/devices/platform-mxs-mmc.c b/arch/arm/mach-mxs/devices/platform-mxs-mmc.c
index bef9d923f54e..b33c9d05c552 100644
--- a/arch/arm/mach-mxs/devices/platform-mxs-mmc.c
+++ b/arch/arm/mach-mxs/devices/platform-mxs-mmc.c
@@ -17,8 +17,9 @@
 #include <mach/mx28.h>
 #include <mach/devices-common.h>
 
-#define mxs_mxs_mmc_data_entry_single(soc, _id, hwid)			\
+#define mxs_mxs_mmc_data_entry_single(soc, _devid, _id, hwid)		\
 	{								\
+		.devid = _devid,					\
 		.id = _id,						\
 		.iobase = soc ## _SSP ## hwid ## _BASE_ADDR,		\
 		.dma = soc ## _DMA_SSP ## hwid,				\
@@ -26,23 +27,23 @@
 		.irq_dma = soc ## _INT_SSP ## hwid ## _DMA,		\
 	}
 
-#define mxs_mxs_mmc_data_entry(soc, _id, hwid)				\
-	[_id] = mxs_mxs_mmc_data_entry_single(soc, _id, hwid)
+#define mxs_mxs_mmc_data_entry(soc, _devid, _id, hwid)			\
+	[_id] = mxs_mxs_mmc_data_entry_single(soc, _devid, _id, hwid)
 
 
 #ifdef CONFIG_SOC_IMX23
 const struct mxs_mxs_mmc_data mx23_mxs_mmc_data[] __initconst = {
-	mxs_mxs_mmc_data_entry(MX23, 0, 1),
-	mxs_mxs_mmc_data_entry(MX23, 1, 2),
+	mxs_mxs_mmc_data_entry(MX23, "imx23-mmc", 0, 1),
+	mxs_mxs_mmc_data_entry(MX23, "imx23-mmc", 1, 2),
 };
 #endif
 
 #ifdef CONFIG_SOC_IMX28
 const struct mxs_mxs_mmc_data mx28_mxs_mmc_data[] __initconst = {
-	mxs_mxs_mmc_data_entry(MX28, 0, 0),
-	mxs_mxs_mmc_data_entry(MX28, 1, 1),
-	mxs_mxs_mmc_data_entry(MX28, 2, 2),
-	mxs_mxs_mmc_data_entry(MX28, 3, 3),
+	mxs_mxs_mmc_data_entry(MX28, "imx28-mmc", 0, 0),
+	mxs_mxs_mmc_data_entry(MX28, "imx28-mmc", 1, 1),
+	mxs_mxs_mmc_data_entry(MX28, "imx28-mmc", 2, 2),
+	mxs_mxs_mmc_data_entry(MX28, "imx28-mmc", 3, 3),
 };
 #endif
 
@@ -70,6 +71,6 @@ struct platform_device *__init mxs_add_mxs_mmc(
 		},
 	};
 
-	return mxs_add_platform_device("mxs-mmc", data->id,
+	return mxs_add_platform_device(data->devid, data->id,
 			res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
 }
diff --git a/arch/arm/mach-mxs/include/mach/clock.h b/arch/arm/mach-mxs/include/mach/clock.h
deleted file mode 100644
index 592c9ab5d760..000000000000
--- a/arch/arm/mach-mxs/include/mach/clock.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA  02110-1301, USA.
- */
-
-#ifndef __MACH_MXS_CLOCK_H__
-#define __MACH_MXS_CLOCK_H__
-
-#ifndef __ASSEMBLY__
-#include <linux/list.h>
-
-struct module;
-
-struct clk {
-	int id;
-	/* Source clock this clk depends on */
-	struct clk *parent;
-	/* Reference count of clock enable/disable */
-	__s8 usecount;
-	/* Register bit position for clock's enable/disable control. */
-	u8 enable_shift;
-	/* Register address for clock's enable/disable control. */
-	void __iomem *enable_reg;
-	u32 flags;
-	/* get the current clock rate (always a fresh value) */
-	unsigned long (*get_rate) (struct clk *);
-	/* Function ptr to set the clock to a new rate. The rate must match a
-	   supported rate returned from round_rate. Leave blank if clock is not
-	   programmable */
-	int (*set_rate) (struct clk *, unsigned long);
-	/* Function ptr to round the requested clock rate to the nearest
-	   supported rate that is less than or equal to the requested rate. */
-	unsigned long (*round_rate) (struct clk *, unsigned long);
-	/* Function ptr to enable the clock. Leave blank if clock can not
-	   be gated. */
-	int (*enable) (struct clk *);
-	/* Function ptr to disable the clock. Leave blank if clock can not
-	   be gated. */
-	void (*disable) (struct clk *);
-	/* Function ptr to set the parent clock of the clock. */
-	int (*set_parent) (struct clk *, struct clk *);
-};
-
-int clk_register(struct clk *clk);
-void clk_unregister(struct clk *clk);
-
-#endif /* __ASSEMBLY__ */
-#endif /* __MACH_MXS_CLOCK_H__ */
diff --git a/arch/arm/mach-mxs/include/mach/common.h b/arch/arm/mach-mxs/include/mach/common.h
index c50c3ea28a9d..de6c7ba42544 100644
--- a/arch/arm/mach-mxs/include/mach/common.h
+++ b/arch/arm/mach-mxs/include/mach/common.h
@@ -11,26 +11,27 @@
 #ifndef __MACH_MXS_COMMON_H__
 #define __MACH_MXS_COMMON_H__
 
-struct clk;
-
 extern const u32 *mxs_get_ocotp(void);
 extern int mxs_reset_block(void __iomem *);
-extern void mxs_timer_init(struct clk *, int);
+extern void mxs_timer_init(int);
 extern void mxs_restart(char, const char *);
 extern int mxs_saif_clkmux_select(unsigned int clkmux);
 
-extern int mx23_register_gpios(void);
+extern void mx23_soc_init(void);
 extern int mx23_clocks_init(void);
 extern void mx23_map_io(void);
 extern void mx23_init_irq(void);
 
-extern int mx28_register_gpios(void);
+extern void mx28_soc_init(void);
 extern int mx28_clocks_init(void);
 extern void mx28_map_io(void);
 extern void mx28_init_irq(void);
 
 extern void icoll_init_irq(void);
 
-extern int mxs_clkctrl_timeout(unsigned int reg_offset, unsigned int mask);
+extern struct platform_device *mxs_add_dma(const char *devid,
+						resource_size_t base);
+extern struct platform_device *mxs_add_gpio(char *name, int id,
+					    resource_size_t iobase, int irq);
 
 #endif /* __MACH_MXS_COMMON_H__ */
diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h b/arch/arm/mach-mxs/include/mach/devices-common.h
index f2e383955d88..e8b1d958240b 100644
--- a/arch/arm/mach-mxs/include/mach/devices-common.h
+++ b/arch/arm/mach-mxs/include/mach/devices-common.h
@@ -27,11 +27,6 @@ static inline struct platform_device *mxs_add_platform_device(
 			name, id, res, num_resources, data, size_data, 0);
 }
 
-int __init mxs_add_amba_device(const struct amba_device *dev);
-
-/* duart */
-int __init mxs_add_duart(const struct amba_device *dev);
-
 /* auart */
 struct mxs_auart_data {
 	int id;
@@ -87,8 +82,9 @@ struct platform_device * __init mxs_add_mxs_i2c(
 		const struct mxs_mxs_i2c_data *data);
 
 /* mmc */
-#include <mach/mmc.h>
+#include <linux/mmc/mxs-mmc.h>
 struct mxs_mxs_mmc_data {
+	const char *devid;
 	int id;
 	resource_size_t iobase;
 	resource_size_t dma;
diff --git a/arch/arm/mach-mxs/include/mach/mmc.h b/arch/arm/mach-mxs/include/mach/mmc.h
deleted file mode 100644
index 211547a05564..000000000000
--- a/arch/arm/mach-mxs/include/mach/mmc.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __MACH_MXS_MMC_H__
-#define __MACH_MXS_MMC_H__
-
-struct mxs_mmc_platform_data {
-	int wp_gpio;	/* write protect pin */
-	unsigned int flags;
-#define SLOTF_4_BIT_CAPABLE	(1 << 0)
-#define SLOTF_8_BIT_CAPABLE	(1 << 1)
-};
-#endif /* __MACH_MXS_MMC_H__ */
diff --git a/arch/arm/mach-mxs/mach-apx4devkit.c b/arch/arm/mach-mxs/mach-apx4devkit.c
index 48a7fab571a6..5e90b9dcdef8 100644
--- a/arch/arm/mach-mxs/mach-apx4devkit.c
+++ b/arch/arm/mach-mxs/mach-apx4devkit.c
@@ -207,6 +207,8 @@ static int apx4devkit_phy_fixup(struct phy_device *phy)
 
 static void __init apx4devkit_init(void)
 {
+	mx28_soc_init();
+
 	mxs_iomux_setup_multiple_pads(apx4devkit_pads,
 			ARRAY_SIZE(apx4devkit_pads));
 
diff --git a/arch/arm/mach-mxs/mach-m28evk.c b/arch/arm/mach-mxs/mach-m28evk.c
index 06d79963611c..4c00c879b893 100644
--- a/arch/arm/mach-mxs/mach-m28evk.c
+++ b/arch/arm/mach-mxs/mach-m28evk.c
@@ -319,6 +319,8 @@ static struct mxs_mmc_platform_data m28evk_mmc_pdata[] __initdata = {
 
 static void __init m28evk_init(void)
 {
+	mx28_soc_init();
+
 	mxs_iomux_setup_multiple_pads(m28evk_pads, ARRAY_SIZE(m28evk_pads));
 
 	mx28_add_duart();
diff --git a/arch/arm/mach-mxs/mach-mx23evk.c b/arch/arm/mach-mxs/mach-mx23evk.c
index 5ea1c57d2606..e7272a41939d 100644
--- a/arch/arm/mach-mxs/mach-mx23evk.c
+++ b/arch/arm/mach-mxs/mach-mx23evk.c
@@ -141,6 +141,8 @@ static void __init mx23evk_init(void)
 {
 	int ret;
 
+	mx23_soc_init();
+
 	mxs_iomux_setup_multiple_pads(mx23evk_pads, ARRAY_SIZE(mx23evk_pads));
 
 	mx23_add_duart();
diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c
index e386c142f93c..dafd48e86c8c 100644
--- a/arch/arm/mach-mxs/mach-mx28evk.c
+++ b/arch/arm/mach-mxs/mach-mx28evk.c
@@ -226,7 +226,7 @@ static void __init mx28evk_fec_reset(void)
 	struct clk *clk;
 
 	/* Enable fec phy clock */
-	clk = clk_get_sys("pll2", NULL);
+	clk = clk_get_sys("enet_out", NULL);
 	if (!IS_ERR(clk))
 		clk_prepare_enable(clk);
 
@@ -413,6 +413,8 @@ static void __init mx28evk_init(void)
 {
 	int ret;
 
+	mx28_soc_init();
+
 	mxs_iomux_setup_multiple_pads(mx28evk_pads, ARRAY_SIZE(mx28evk_pads));
 
 	mx28_add_duart();
diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
new file mode 100644
index 000000000000..8cac94b33020
--- /dev/null
+++ b/arch/arm/mach-mxs/mach-mxs.c
@@ -0,0 +1,121 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2012 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/init.h>
+#include <linux/irqdomain.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <mach/common.h>
+
+static int __init mxs_icoll_add_irq_domain(struct device_node *np,
+				struct device_node *interrupt_parent)
+{
+	irq_domain_add_legacy(np, 128, 0, 0, &irq_domain_simple_ops, NULL);
+
+	return 0;
+}
+
+static int __init mxs_gpio_add_irq_domain(struct device_node *np,
+				struct device_node *interrupt_parent)
+{
+	static int gpio_irq_base = MXS_GPIO_IRQ_START;
+
+	irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops, NULL);
+	gpio_irq_base += 32;
+
+	return 0;
+}
+
+static const struct of_device_id mxs_irq_match[] __initconst = {
+	{ .compatible = "fsl,mxs-icoll", .data = mxs_icoll_add_irq_domain, },
+	{ .compatible = "fsl,mxs-gpio", .data = mxs_gpio_add_irq_domain, },
+	{ /* sentinel */ }
+};
+
+static void __init mxs_dt_init_irq(void)
+{
+	icoll_init_irq();
+	of_irq_init(mxs_irq_match);
+}
+
+static void __init imx23_timer_init(void)
+{
+	mx23_clocks_init();
+}
+
+static struct sys_timer imx23_timer = {
+	.init = imx23_timer_init,
+};
+
+static void __init imx28_timer_init(void)
+{
+	mx28_clocks_init();
+}
+
+static struct sys_timer imx28_timer = {
+	.init = imx28_timer_init,
+};
+
+static void __init imx28_evk_init(void)
+{
+	struct clk *clk;
+
+	/* Enable fec phy clock */
+	clk = clk_get_sys("enet_out", NULL);
+	if (!IS_ERR(clk))
+		clk_prepare_enable(clk);
+}
+
+static void __init mxs_machine_init(void)
+{
+	if (of_machine_is_compatible("fsl,imx28-evk"))
+		imx28_evk_init();
+
+	of_platform_populate(NULL, of_default_bus_match_table,
+				NULL, NULL);
+}
+
+static const char *imx23_dt_compat[] __initdata = {
+	"fsl,imx23-evk",
+	"fsl,imx23",
+	NULL,
+};
+
+static const char *imx28_dt_compat[] __initdata = {
+	"fsl,imx28-evk",
+	"fsl,imx28",
+	NULL,
+};
+
+DT_MACHINE_START(IMX23, "Freescale i.MX23 (Device Tree)")
+	.map_io		= mx23_map_io,
+	.init_irq	= mxs_dt_init_irq,
+	.timer		= &imx23_timer,
+	.init_machine	= mxs_machine_init,
+	.dt_compat	= imx23_dt_compat,
+	.restart	= mxs_restart,
+MACHINE_END
+
+DT_MACHINE_START(IMX28, "Freescale i.MX28 (Device Tree)")
+	.map_io		= mx28_map_io,
+	.init_irq	= mxs_dt_init_irq,
+	.timer		= &imx28_timer,
+	.init_machine	= mxs_machine_init,
+	.dt_compat	= imx28_dt_compat,
+	.restart	= mxs_restart,
+MACHINE_END
diff --git a/arch/arm/mach-mxs/mach-stmp378x_devb.c b/arch/arm/mach-mxs/mach-stmp378x_devb.c
index a626c07b8713..6548965e4a76 100644
--- a/arch/arm/mach-mxs/mach-stmp378x_devb.c
+++ b/arch/arm/mach-mxs/mach-stmp378x_devb.c
@@ -85,6 +85,8 @@ static void __init stmp378x_dvb_init(void)
 {
 	int ret;
 
+	mx23_soc_init();
+
 	mxs_iomux_setup_multiple_pads(stmp378x_dvb_pads,
 			ARRAY_SIZE(stmp378x_dvb_pads));
 
diff --git a/arch/arm/mach-mxs/mach-tx28.c b/arch/arm/mach-mxs/mach-tx28.c
index 2c0862e655ee..8837029de1a4 100644
--- a/arch/arm/mach-mxs/mach-tx28.c
+++ b/arch/arm/mach-mxs/mach-tx28.c
@@ -146,6 +146,8 @@ static struct mxs_mmc_platform_data tx28_mmc0_pdata __initdata = {
 
 static void __init tx28_stk5v3_init(void)
 {
+	mx28_soc_init();
+
 	mxs_iomux_setup_multiple_pads(tx28_stk5v3_pads,
 			ARRAY_SIZE(tx28_stk5v3_pads));
 
diff --git a/arch/arm/mach-mxs/mm.c b/arch/arm/mach-mxs/mm.c
index 50af5ceebf6d..dccb67a9e7c4 100644
--- a/arch/arm/mach-mxs/mm.c
+++ b/arch/arm/mach-mxs/mm.c
@@ -13,6 +13,7 @@
 
 #include <linux/mm.h>
 #include <linux/init.h>
+#include <linux/pinctrl/machine.h>
 
 #include <asm/mach/map.h>
 
@@ -61,3 +62,29 @@ void __init mx28_init_irq(void)
 {
 	icoll_init_irq();
 }
+
+void __init mx23_soc_init(void)
+{
+	pinctrl_provide_dummies();
+
+	mxs_add_dma("imx23-dma-apbh", MX23_APBH_DMA_BASE_ADDR);
+	mxs_add_dma("imx23-dma-apbx", MX23_APBX_DMA_BASE_ADDR);
+
+	mxs_add_gpio("imx23-gpio", 0, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO0);
+	mxs_add_gpio("imx23-gpio", 1, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO1);
+	mxs_add_gpio("imx23-gpio", 2, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO2);
+}
+
+void __init mx28_soc_init(void)
+{
+	pinctrl_provide_dummies();
+
+	mxs_add_dma("imx28-dma-apbh", MX23_APBH_DMA_BASE_ADDR);
+	mxs_add_dma("imx28-dma-apbx", MX23_APBX_DMA_BASE_ADDR);
+
+	mxs_add_gpio("imx28-gpio", 0, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO0);
+	mxs_add_gpio("imx28-gpio", 1, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO1);
+	mxs_add_gpio("imx28-gpio", 2, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO2);
+	mxs_add_gpio("imx28-gpio", 3, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO3);
+	mxs_add_gpio("imx28-gpio", 4, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO4);
+}
diff --git a/arch/arm/mach-mxs/regs-clkctrl-mx23.h b/arch/arm/mach-mxs/regs-clkctrl-mx23.h
deleted file mode 100644
index 0ea5c9d0e2b2..000000000000
--- a/arch/arm/mach-mxs/regs-clkctrl-mx23.h
+++ /dev/null
@@ -1,331 +0,0 @@
-/*
- * Freescale CLKCTRL Register Definitions
- *
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- * Copyright 2008-2010 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- *
- * This file is created by xml file. Don't Edit it.
- *
- * Xml Revision: 1.48
- * Template revision: 26195
- */
-
-#ifndef __REGS_CLKCTRL_MX23_H__
-#define __REGS_CLKCTRL_MX23_H__
-
-
-#define HW_CLKCTRL_PLLCTRL0	(0x00000000)
-#define HW_CLKCTRL_PLLCTRL0_SET	(0x00000004)
-#define HW_CLKCTRL_PLLCTRL0_CLR	(0x00000008)
-#define HW_CLKCTRL_PLLCTRL0_TOG	(0x0000000c)
-
-#define BP_CLKCTRL_PLLCTRL0_LFR_SEL	28
-#define BM_CLKCTRL_PLLCTRL0_LFR_SEL	0x30000000
-#define BF_CLKCTRL_PLLCTRL0_LFR_SEL(v)  \
-		(((v) << 28) & BM_CLKCTRL_PLLCTRL0_LFR_SEL)
-#define BV_CLKCTRL_PLLCTRL0_LFR_SEL__DEFAULT   0x0
-#define BV_CLKCTRL_PLLCTRL0_LFR_SEL__TIMES_2   0x1
-#define BV_CLKCTRL_PLLCTRL0_LFR_SEL__TIMES_05  0x2
-#define BV_CLKCTRL_PLLCTRL0_LFR_SEL__UNDEFINED 0x3
-#define BP_CLKCTRL_PLLCTRL0_CP_SEL	24
-#define BM_CLKCTRL_PLLCTRL0_CP_SEL	0x03000000
-#define BF_CLKCTRL_PLLCTRL0_CP_SEL(v)  \
-		(((v) << 24) & BM_CLKCTRL_PLLCTRL0_CP_SEL)
-#define BV_CLKCTRL_PLLCTRL0_CP_SEL__DEFAULT   0x0
-#define BV_CLKCTRL_PLLCTRL0_CP_SEL__TIMES_2   0x1
-#define BV_CLKCTRL_PLLCTRL0_CP_SEL__TIMES_05  0x2
-#define BV_CLKCTRL_PLLCTRL0_CP_SEL__UNDEFINED 0x3
-#define BP_CLKCTRL_PLLCTRL0_DIV_SEL	20
-#define BM_CLKCTRL_PLLCTRL0_DIV_SEL	0x00300000
-#define BF_CLKCTRL_PLLCTRL0_DIV_SEL(v)  \
-		(((v) << 20) & BM_CLKCTRL_PLLCTRL0_DIV_SEL)
-#define BV_CLKCTRL_PLLCTRL0_DIV_SEL__DEFAULT   0x0
-#define BV_CLKCTRL_PLLCTRL0_DIV_SEL__LOWER     0x1
-#define BV_CLKCTRL_PLLCTRL0_DIV_SEL__LOWEST    0x2
-#define BV_CLKCTRL_PLLCTRL0_DIV_SEL__UNDEFINED 0x3
-#define BM_CLKCTRL_PLLCTRL0_EN_USB_CLKS	0x00040000
-#define BM_CLKCTRL_PLLCTRL0_POWER	0x00010000
-
-#define HW_CLKCTRL_PLLCTRL1	(0x00000010)
-
-#define BM_CLKCTRL_PLLCTRL1_LOCK	0x80000000
-#define BM_CLKCTRL_PLLCTRL1_FORCE_LOCK	0x40000000
-#define BP_CLKCTRL_PLLCTRL1_LOCK_COUNT	0
-#define BM_CLKCTRL_PLLCTRL1_LOCK_COUNT	0x0000FFFF
-#define BF_CLKCTRL_PLLCTRL1_LOCK_COUNT(v)  \
-		(((v) << 0) & BM_CLKCTRL_PLLCTRL1_LOCK_COUNT)
-
-#define HW_CLKCTRL_CPU	(0x00000020)
-#define HW_CLKCTRL_CPU_SET	(0x00000024)
-#define HW_CLKCTRL_CPU_CLR	(0x00000028)
-#define HW_CLKCTRL_CPU_TOG	(0x0000002c)
-
-#define BM_CLKCTRL_CPU_BUSY_REF_XTAL	0x20000000
-#define BM_CLKCTRL_CPU_BUSY_REF_CPU	0x10000000
-#define BM_CLKCTRL_CPU_DIV_XTAL_FRAC_EN	0x04000000
-#define BP_CLKCTRL_CPU_DIV_XTAL	16
-#define BM_CLKCTRL_CPU_DIV_XTAL	0x03FF0000
-#define BF_CLKCTRL_CPU_DIV_XTAL(v)  \
-		(((v) << 16) & BM_CLKCTRL_CPU_DIV_XTAL)
-#define BM_CLKCTRL_CPU_INTERRUPT_WAIT	0x00001000
-#define BM_CLKCTRL_CPU_DIV_CPU_FRAC_EN	0x00000400
-#define BP_CLKCTRL_CPU_DIV_CPU	0
-#define BM_CLKCTRL_CPU_DIV_CPU	0x0000003F
-#define BF_CLKCTRL_CPU_DIV_CPU(v)  \
-		(((v) << 0) & BM_CLKCTRL_CPU_DIV_CPU)
-
-#define HW_CLKCTRL_HBUS	(0x00000030)
-#define HW_CLKCTRL_HBUS_SET	(0x00000034)
-#define HW_CLKCTRL_HBUS_CLR	(0x00000038)
-#define HW_CLKCTRL_HBUS_TOG	(0x0000003c)
-
-#define BM_CLKCTRL_HBUS_BUSY	0x20000000
-#define BM_CLKCTRL_HBUS_DCP_AS_ENABLE	0x10000000
-#define BM_CLKCTRL_HBUS_PXP_AS_ENABLE	0x08000000
-#define BM_CLKCTRL_HBUS_APBHDMA_AS_ENABLE	0x04000000
-#define BM_CLKCTRL_HBUS_APBXDMA_AS_ENABLE	0x02000000
-#define BM_CLKCTRL_HBUS_TRAFFIC_JAM_AS_ENABLE	0x01000000
-#define BM_CLKCTRL_HBUS_TRAFFIC_AS_ENABLE	0x00800000
-#define BM_CLKCTRL_HBUS_CPU_DATA_AS_ENABLE	0x00400000
-#define BM_CLKCTRL_HBUS_CPU_INSTR_AS_ENABLE	0x00200000
-#define BM_CLKCTRL_HBUS_AUTO_SLOW_MODE	0x00100000
-#define BP_CLKCTRL_HBUS_SLOW_DIV	16
-#define BM_CLKCTRL_HBUS_SLOW_DIV	0x00070000
-#define BF_CLKCTRL_HBUS_SLOW_DIV(v)  \
-		(((v) << 16) & BM_CLKCTRL_HBUS_SLOW_DIV)
-#define BV_CLKCTRL_HBUS_SLOW_DIV__BY1  0x0
-#define BV_CLKCTRL_HBUS_SLOW_DIV__BY2  0x1
-#define BV_CLKCTRL_HBUS_SLOW_DIV__BY4  0x2
-#define BV_CLKCTRL_HBUS_SLOW_DIV__BY8  0x3
-#define BV_CLKCTRL_HBUS_SLOW_DIV__BY16 0x4
-#define BV_CLKCTRL_HBUS_SLOW_DIV__BY32 0x5
-#define BM_CLKCTRL_HBUS_DIV_FRAC_EN	0x00000020
-#define BP_CLKCTRL_HBUS_DIV	0
-#define BM_CLKCTRL_HBUS_DIV	0x0000001F
-#define BF_CLKCTRL_HBUS_DIV(v)  \
-		(((v) << 0) & BM_CLKCTRL_HBUS_DIV)
-
-#define HW_CLKCTRL_XBUS	(0x00000040)
-
-#define BM_CLKCTRL_XBUS_BUSY	0x80000000
-#define BM_CLKCTRL_XBUS_DIV_FRAC_EN	0x00000400
-#define BP_CLKCTRL_XBUS_DIV	0
-#define BM_CLKCTRL_XBUS_DIV	0x000003FF
-#define BF_CLKCTRL_XBUS_DIV(v)  \
-		(((v) << 0) & BM_CLKCTRL_XBUS_DIV)
-
-#define HW_CLKCTRL_XTAL	(0x00000050)
-#define HW_CLKCTRL_XTAL_SET	(0x00000054)
-#define HW_CLKCTRL_XTAL_CLR	(0x00000058)
-#define HW_CLKCTRL_XTAL_TOG	(0x0000005c)
-
-#define BP_CLKCTRL_XTAL_UART_CLK_GATE	31
-#define BM_CLKCTRL_XTAL_UART_CLK_GATE	0x80000000
-#define BP_CLKCTRL_XTAL_FILT_CLK24M_GATE	30
-#define BM_CLKCTRL_XTAL_FILT_CLK24M_GATE	0x40000000
-#define BP_CLKCTRL_XTAL_PWM_CLK24M_GATE	29
-#define BM_CLKCTRL_XTAL_PWM_CLK24M_GATE	0x20000000
-#define BM_CLKCTRL_XTAL_DRI_CLK24M_GATE	0x10000000
-#define BM_CLKCTRL_XTAL_DIGCTRL_CLK1M_GATE	0x08000000
-#define BP_CLKCTRL_XTAL_TIMROT_CLK32K_GATE	26
-#define BM_CLKCTRL_XTAL_TIMROT_CLK32K_GATE	0x04000000
-#define BP_CLKCTRL_XTAL_DIV_UART	0
-#define BM_CLKCTRL_XTAL_DIV_UART	0x00000003
-#define BF_CLKCTRL_XTAL_DIV_UART(v)  \
-		(((v) << 0) & BM_CLKCTRL_XTAL_DIV_UART)
-
-#define HW_CLKCTRL_PIX	(0x00000060)
-
-#define BP_CLKCTRL_PIX_CLKGATE	31
-#define BM_CLKCTRL_PIX_CLKGATE	0x80000000
-#define BM_CLKCTRL_PIX_BUSY	0x20000000
-#define BM_CLKCTRL_PIX_DIV_FRAC_EN	0x00001000
-#define BP_CLKCTRL_PIX_DIV	0
-#define BM_CLKCTRL_PIX_DIV	0x00000FFF
-#define BF_CLKCTRL_PIX_DIV(v)  \
-		(((v) << 0) & BM_CLKCTRL_PIX_DIV)
-
-#define HW_CLKCTRL_SSP	(0x00000070)
-
-#define BP_CLKCTRL_SSP_CLKGATE	31
-#define BM_CLKCTRL_SSP_CLKGATE	0x80000000
-#define BM_CLKCTRL_SSP_BUSY	0x20000000
-#define BM_CLKCTRL_SSP_DIV_FRAC_EN	0x00000200
-#define BP_CLKCTRL_SSP_DIV	0
-#define BM_CLKCTRL_SSP_DIV	0x000001FF
-#define BF_CLKCTRL_SSP_DIV(v)  \
-		(((v) << 0) & BM_CLKCTRL_SSP_DIV)
-
-#define HW_CLKCTRL_GPMI	(0x00000080)
-
-#define BP_CLKCTRL_GPMI_CLKGATE	31
-#define BM_CLKCTRL_GPMI_CLKGATE	0x80000000
-#define BM_CLKCTRL_GPMI_BUSY	0x20000000
-#define BM_CLKCTRL_GPMI_DIV_FRAC_EN	0x00000400
-#define BP_CLKCTRL_GPMI_DIV	0
-#define BM_CLKCTRL_GPMI_DIV	0x000003FF
-#define BF_CLKCTRL_GPMI_DIV(v)  \
-		(((v) << 0) & BM_CLKCTRL_GPMI_DIV)
-
-#define HW_CLKCTRL_SPDIF	(0x00000090)
-
-#define BM_CLKCTRL_SPDIF_CLKGATE	0x80000000
-
-#define HW_CLKCTRL_EMI	(0x000000a0)
-
-#define BP_CLKCTRL_EMI_CLKGATE	31
-#define BM_CLKCTRL_EMI_CLKGATE	0x80000000
-#define BM_CLKCTRL_EMI_SYNC_MODE_EN	0x40000000
-#define BM_CLKCTRL_EMI_BUSY_REF_XTAL	0x20000000
-#define BM_CLKCTRL_EMI_BUSY_REF_EMI	0x10000000
-#define BM_CLKCTRL_EMI_BUSY_REF_CPU	0x08000000
-#define BM_CLKCTRL_EMI_BUSY_SYNC_MODE	0x04000000
-#define BM_CLKCTRL_EMI_BUSY_DCC_RESYNC	0x00020000
-#define BM_CLKCTRL_EMI_DCC_RESYNC_ENABLE	0x00010000
-#define BP_CLKCTRL_EMI_DIV_XTAL	8
-#define BM_CLKCTRL_EMI_DIV_XTAL	0x00000F00
-#define BF_CLKCTRL_EMI_DIV_XTAL(v)  \
-		(((v) << 8) & BM_CLKCTRL_EMI_DIV_XTAL)
-#define BP_CLKCTRL_EMI_DIV_EMI	0
-#define BM_CLKCTRL_EMI_DIV_EMI	0x0000003F
-#define BF_CLKCTRL_EMI_DIV_EMI(v)  \
-		(((v) << 0) & BM_CLKCTRL_EMI_DIV_EMI)
-
-#define HW_CLKCTRL_IR	(0x000000b0)
-
-#define BM_CLKCTRL_IR_CLKGATE	0x80000000
-#define BM_CLKCTRL_IR_AUTO_DIV	0x20000000
-#define BM_CLKCTRL_IR_IR_BUSY	0x10000000
-#define BM_CLKCTRL_IR_IROV_BUSY	0x08000000
-#define BP_CLKCTRL_IR_IROV_DIV	16
-#define BM_CLKCTRL_IR_IROV_DIV	0x01FF0000
-#define BF_CLKCTRL_IR_IROV_DIV(v)  \
-		(((v) << 16) & BM_CLKCTRL_IR_IROV_DIV)
-#define BP_CLKCTRL_IR_IR_DIV	0
-#define BM_CLKCTRL_IR_IR_DIV	0x000003FF
-#define BF_CLKCTRL_IR_IR_DIV(v)  \
-		(((v) << 0) & BM_CLKCTRL_IR_IR_DIV)
-
-#define HW_CLKCTRL_SAIF	(0x000000c0)
-
-#define BM_CLKCTRL_SAIF_CLKGATE	0x80000000
-#define BM_CLKCTRL_SAIF_BUSY	0x20000000
-#define BM_CLKCTRL_SAIF_DIV_FRAC_EN	0x00010000
-#define BP_CLKCTRL_SAIF_DIV	0
-#define BM_CLKCTRL_SAIF_DIV	0x0000FFFF
-#define BF_CLKCTRL_SAIF_DIV(v)  \
-		(((v) << 0) & BM_CLKCTRL_SAIF_DIV)
-
-#define HW_CLKCTRL_TV	(0x000000d0)
-
-#define BM_CLKCTRL_TV_CLK_TV108M_GATE	0x80000000
-#define BM_CLKCTRL_TV_CLK_TV_GATE	0x40000000
-
-#define HW_CLKCTRL_ETM	(0x000000e0)
-
-#define BM_CLKCTRL_ETM_CLKGATE	0x80000000
-#define BM_CLKCTRL_ETM_BUSY	0x20000000
-#define BM_CLKCTRL_ETM_DIV_FRAC_EN	0x00000040
-#define BP_CLKCTRL_ETM_DIV	0
-#define BM_CLKCTRL_ETM_DIV	0x0000003F
-#define BF_CLKCTRL_ETM_DIV(v)  \
-		(((v) << 0) & BM_CLKCTRL_ETM_DIV)
-
-#define HW_CLKCTRL_FRAC	(0x000000f0)
-#define HW_CLKCTRL_FRAC_SET	(0x000000f4)
-#define HW_CLKCTRL_FRAC_CLR	(0x000000f8)
-#define HW_CLKCTRL_FRAC_TOG	(0x000000fc)
-
-#define BP_CLKCTRL_FRAC_CLKGATEIO	31
-#define BM_CLKCTRL_FRAC_CLKGATEIO	0x80000000
-#define BM_CLKCTRL_FRAC_IO_STABLE	0x40000000
-#define BP_CLKCTRL_FRAC_IOFRAC	24
-#define BM_CLKCTRL_FRAC_IOFRAC	0x3F000000
-#define BF_CLKCTRL_FRAC_IOFRAC(v)  \
-		(((v) << 24) & BM_CLKCTRL_FRAC_IOFRAC)
-#define BP_CLKCTRL_FRAC_CLKGATEPIX	23
-#define BM_CLKCTRL_FRAC_CLKGATEPIX	0x00800000
-#define BM_CLKCTRL_FRAC_PIX_STABLE	0x00400000
-#define BP_CLKCTRL_FRAC_PIXFRAC	16
-#define BM_CLKCTRL_FRAC_PIXFRAC	0x003F0000
-#define BF_CLKCTRL_FRAC_PIXFRAC(v)  \
-		(((v) << 16) & BM_CLKCTRL_FRAC_PIXFRAC)
-#define BP_CLKCTRL_FRAC_CLKGATEEMI	15
-#define BM_CLKCTRL_FRAC_CLKGATEEMI	0x00008000
-#define BM_CLKCTRL_FRAC_EMI_STABLE	0x00004000
-#define BP_CLKCTRL_FRAC_EMIFRAC	8
-#define BM_CLKCTRL_FRAC_EMIFRAC	0x00003F00
-#define BF_CLKCTRL_FRAC_EMIFRAC(v)  \
-		(((v) << 8) & BM_CLKCTRL_FRAC_EMIFRAC)
-#define BP_CLKCTRL_FRAC_CLKGATECPU	7
-#define BM_CLKCTRL_FRAC_CLKGATECPU	0x00000080
-#define BM_CLKCTRL_FRAC_CPU_STABLE	0x00000040
-#define BP_CLKCTRL_FRAC_CPUFRAC	0
-#define BM_CLKCTRL_FRAC_CPUFRAC	0x0000003F
-#define BF_CLKCTRL_FRAC_CPUFRAC(v)  \
-		(((v) << 0) & BM_CLKCTRL_FRAC_CPUFRAC)
-
-#define HW_CLKCTRL_FRAC1	(0x00000100)
-#define HW_CLKCTRL_FRAC1_SET	(0x00000104)
-#define HW_CLKCTRL_FRAC1_CLR	(0x00000108)
-#define HW_CLKCTRL_FRAC1_TOG	(0x0000010c)
-
-#define BM_CLKCTRL_FRAC1_CLKGATEVID	0x80000000
-#define BM_CLKCTRL_FRAC1_VID_STABLE	0x40000000
-
-#define HW_CLKCTRL_CLKSEQ	(0x00000110)
-#define HW_CLKCTRL_CLKSEQ_SET	(0x00000114)
-#define HW_CLKCTRL_CLKSEQ_CLR	(0x00000118)
-#define HW_CLKCTRL_CLKSEQ_TOG	(0x0000011c)
-
-#define BM_CLKCTRL_CLKSEQ_BYPASS_ETM	0x00000100
-#define BM_CLKCTRL_CLKSEQ_BYPASS_CPU	0x00000080
-#define BM_CLKCTRL_CLKSEQ_BYPASS_EMI	0x00000040
-#define BM_CLKCTRL_CLKSEQ_BYPASS_SSP	0x00000020
-#define BM_CLKCTRL_CLKSEQ_BYPASS_GPMI	0x00000010
-#define BM_CLKCTRL_CLKSEQ_BYPASS_IR	0x00000008
-#define BM_CLKCTRL_CLKSEQ_BYPASS_PIX	0x00000002
-#define BM_CLKCTRL_CLKSEQ_BYPASS_SAIF	0x00000001
-
-#define HW_CLKCTRL_RESET	(0x00000120)
-
-#define BM_CLKCTRL_RESET_CHIP	0x00000002
-#define BM_CLKCTRL_RESET_DIG	0x00000001
-
-#define HW_CLKCTRL_STATUS	(0x00000130)
-
-#define BP_CLKCTRL_STATUS_CPU_LIMIT	30
-#define BM_CLKCTRL_STATUS_CPU_LIMIT	0xC0000000
-#define BF_CLKCTRL_STATUS_CPU_LIMIT(v) \
-		(((v) << 30) & BM_CLKCTRL_STATUS_CPU_LIMIT)
-
-#define HW_CLKCTRL_VERSION	(0x00000140)
-
-#define BP_CLKCTRL_VERSION_MAJOR	24
-#define BM_CLKCTRL_VERSION_MAJOR	0xFF000000
-#define BF_CLKCTRL_VERSION_MAJOR(v) \
-		(((v) << 24) & BM_CLKCTRL_VERSION_MAJOR)
-#define BP_CLKCTRL_VERSION_MINOR	16
-#define BM_CLKCTRL_VERSION_MINOR	0x00FF0000
-#define BF_CLKCTRL_VERSION_MINOR(v)  \
-		(((v) << 16) & BM_CLKCTRL_VERSION_MINOR)
-#define BP_CLKCTRL_VERSION_STEP	0
-#define BM_CLKCTRL_VERSION_STEP	0x0000FFFF
-#define BF_CLKCTRL_VERSION_STEP(v)  \
-		(((v) << 0) & BM_CLKCTRL_VERSION_STEP)
-
-#endif /* __REGS_CLKCTRL_MX23_H__ */
diff --git a/arch/arm/mach-mxs/regs-clkctrl-mx28.h b/arch/arm/mach-mxs/regs-clkctrl-mx28.h
deleted file mode 100644
index 7d1b061d7943..000000000000
--- a/arch/arm/mach-mxs/regs-clkctrl-mx28.h
+++ /dev/null
@@ -1,486 +0,0 @@
-/*
- * Freescale CLKCTRL Register Definitions
- *
- * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- *
- * This file is created by xml file. Don't Edit it.
- *
- * Xml Revision: 1.48
- * Template revision: 26195
- */
-
-#ifndef __REGS_CLKCTRL_MX28_H__
-#define __REGS_CLKCTRL_MX28_H__
-
-#define HW_CLKCTRL_PLL0CTRL0	(0x00000000)
-#define HW_CLKCTRL_PLL0CTRL0_SET	(0x00000004)
-#define HW_CLKCTRL_PLL0CTRL0_CLR	(0x00000008)
-#define HW_CLKCTRL_PLL0CTRL0_TOG	(0x0000000c)
-
-#define BP_CLKCTRL_PLL0CTRL0_LFR_SEL	28
-#define BM_CLKCTRL_PLL0CTRL0_LFR_SEL	0x30000000
-#define BF_CLKCTRL_PLL0CTRL0_LFR_SEL(v)  \
-		(((v) << 28) & BM_CLKCTRL_PLL0CTRL0_LFR_SEL)
-#define BV_CLKCTRL_PLL0CTRL0_LFR_SEL__DEFAULT   0x0
-#define BV_CLKCTRL_PLL0CTRL0_LFR_SEL__TIMES_2   0x1
-#define BV_CLKCTRL_PLL0CTRL0_LFR_SEL__TIMES_05  0x2
-#define BV_CLKCTRL_PLL0CTRL0_LFR_SEL__UNDEFINED 0x3
-#define BP_CLKCTRL_PLL0CTRL0_CP_SEL	24
-#define BM_CLKCTRL_PLL0CTRL0_CP_SEL	0x03000000
-#define BF_CLKCTRL_PLL0CTRL0_CP_SEL(v)  \
-		(((v) << 24) & BM_CLKCTRL_PLL0CTRL0_CP_SEL)
-#define BV_CLKCTRL_PLL0CTRL0_CP_SEL__DEFAULT   0x0
-#define BV_CLKCTRL_PLL0CTRL0_CP_SEL__TIMES_2   0x1
-#define BV_CLKCTRL_PLL0CTRL0_CP_SEL__TIMES_05  0x2
-#define BV_CLKCTRL_PLL0CTRL0_CP_SEL__UNDEFINED 0x3
-#define BP_CLKCTRL_PLL0CTRL0_DIV_SEL	20
-#define BM_CLKCTRL_PLL0CTRL0_DIV_SEL	0x00300000
-#define BF_CLKCTRL_PLL0CTRL0_DIV_SEL(v)  \
-		(((v) << 20) & BM_CLKCTRL_PLL0CTRL0_DIV_SEL)
-#define BV_CLKCTRL_PLL0CTRL0_DIV_SEL__DEFAULT   0x0
-#define BV_CLKCTRL_PLL0CTRL0_DIV_SEL__LOWER     0x1
-#define BV_CLKCTRL_PLL0CTRL0_DIV_SEL__LOWEST    0x2
-#define BV_CLKCTRL_PLL0CTRL0_DIV_SEL__UNDEFINED 0x3
-#define BM_CLKCTRL_PLL0CTRL0_EN_USB_CLKS	0x00040000
-#define BM_CLKCTRL_PLL0CTRL0_POWER	0x00020000
-
-#define HW_CLKCTRL_PLL0CTRL1	(0x00000010)
-
-#define BM_CLKCTRL_PLL0CTRL1_LOCK	0x80000000
-#define BM_CLKCTRL_PLL0CTRL1_FORCE_LOCK	0x40000000
-#define BP_CLKCTRL_PLL0CTRL1_LOCK_COUNT	0
-#define BM_CLKCTRL_PLL0CTRL1_LOCK_COUNT	0x0000FFFF
-#define BF_CLKCTRL_PLL0CTRL1_LOCK_COUNT(v)  \
-		(((v) << 0) & BM_CLKCTRL_PLL0CTRL1_LOCK_COUNT)
-
-#define HW_CLKCTRL_PLL1CTRL0	(0x00000020)
-#define HW_CLKCTRL_PLL1CTRL0_SET	(0x00000024)
-#define HW_CLKCTRL_PLL1CTRL0_CLR	(0x00000028)
-#define HW_CLKCTRL_PLL1CTRL0_TOG	(0x0000002c)
-
-#define BM_CLKCTRL_PLL1CTRL0_CLKGATEEMI	0x80000000
-#define BP_CLKCTRL_PLL1CTRL0_LFR_SEL	28
-#define BM_CLKCTRL_PLL1CTRL0_LFR_SEL	0x30000000
-#define BF_CLKCTRL_PLL1CTRL0_LFR_SEL(v)  \
-		(((v) << 28) & BM_CLKCTRL_PLL1CTRL0_LFR_SEL)
-#define BV_CLKCTRL_PLL1CTRL0_LFR_SEL__DEFAULT   0x0
-#define BV_CLKCTRL_PLL1CTRL0_LFR_SEL__TIMES_2   0x1
-#define BV_CLKCTRL_PLL1CTRL0_LFR_SEL__TIMES_05  0x2
-#define BV_CLKCTRL_PLL1CTRL0_LFR_SEL__UNDEFINED 0x3
-#define BP_CLKCTRL_PLL1CTRL0_CP_SEL	24
-#define BM_CLKCTRL_PLL1CTRL0_CP_SEL	0x03000000
-#define BF_CLKCTRL_PLL1CTRL0_CP_SEL(v)  \
-		(((v) << 24) & BM_CLKCTRL_PLL1CTRL0_CP_SEL)
-#define BV_CLKCTRL_PLL1CTRL0_CP_SEL__DEFAULT   0x0
-#define BV_CLKCTRL_PLL1CTRL0_CP_SEL__TIMES_2   0x1
-#define BV_CLKCTRL_PLL1CTRL0_CP_SEL__TIMES_05  0x2
-#define BV_CLKCTRL_PLL1CTRL0_CP_SEL__UNDEFINED 0x3
-#define BP_CLKCTRL_PLL1CTRL0_DIV_SEL	20
-#define BM_CLKCTRL_PLL1CTRL0_DIV_SEL	0x00300000
-#define BF_CLKCTRL_PLL1CTRL0_DIV_SEL(v)  \
-		(((v) << 20) & BM_CLKCTRL_PLL1CTRL0_DIV_SEL)
-#define BV_CLKCTRL_PLL1CTRL0_DIV_SEL__DEFAULT   0x0
-#define BV_CLKCTRL_PLL1CTRL0_DIV_SEL__LOWER     0x1
-#define BV_CLKCTRL_PLL1CTRL0_DIV_SEL__LOWEST    0x2
-#define BV_CLKCTRL_PLL1CTRL0_DIV_SEL__UNDEFINED 0x3
-#define BM_CLKCTRL_PLL1CTRL0_EN_USB_CLKS	0x00040000
-#define BM_CLKCTRL_PLL1CTRL0_POWER	0x00020000
-
-#define HW_CLKCTRL_PLL1CTRL1	(0x00000030)
-
-#define BM_CLKCTRL_PLL1CTRL1_LOCK	0x80000000
-#define BM_CLKCTRL_PLL1CTRL1_FORCE_LOCK	0x40000000
-#define BP_CLKCTRL_PLL1CTRL1_LOCK_COUNT	0
-#define BM_CLKCTRL_PLL1CTRL1_LOCK_COUNT	0x0000FFFF
-#define BF_CLKCTRL_PLL1CTRL1_LOCK_COUNT(v)  \
-		(((v) << 0) & BM_CLKCTRL_PLL1CTRL1_LOCK_COUNT)
-
-#define HW_CLKCTRL_PLL2CTRL0	(0x00000040)
-#define HW_CLKCTRL_PLL2CTRL0_SET	(0x00000044)
-#define HW_CLKCTRL_PLL2CTRL0_CLR	(0x00000048)
-#define HW_CLKCTRL_PLL2CTRL0_TOG	(0x0000004c)
-
-#define BM_CLKCTRL_PLL2CTRL0_CLKGATE	0x80000000
-#define BP_CLKCTRL_PLL2CTRL0_LFR_SEL	28
-#define BM_CLKCTRL_PLL2CTRL0_LFR_SEL	0x30000000
-#define BF_CLKCTRL_PLL2CTRL0_LFR_SEL(v)  \
-		(((v) << 28) & BM_CLKCTRL_PLL2CTRL0_LFR_SEL)
-#define BM_CLKCTRL_PLL2CTRL0_HOLD_RING_OFF_B	0x04000000
-#define BP_CLKCTRL_PLL2CTRL0_CP_SEL	24
-#define BM_CLKCTRL_PLL2CTRL0_CP_SEL	0x03000000
-#define BF_CLKCTRL_PLL2CTRL0_CP_SEL(v)  \
-		(((v) << 24) & BM_CLKCTRL_PLL2CTRL0_CP_SEL)
-#define BM_CLKCTRL_PLL2CTRL0_POWER	0x00800000
-
-#define HW_CLKCTRL_CPU	(0x00000050)
-#define HW_CLKCTRL_CPU_SET	(0x00000054)
-#define HW_CLKCTRL_CPU_CLR	(0x00000058)
-#define HW_CLKCTRL_CPU_TOG	(0x0000005c)
-
-#define BM_CLKCTRL_CPU_BUSY_REF_XTAL	0x20000000
-#define BM_CLKCTRL_CPU_BUSY_REF_CPU	0x10000000
-#define BM_CLKCTRL_CPU_DIV_XTAL_FRAC_EN	0x04000000
-#define BP_CLKCTRL_CPU_DIV_XTAL	16
-#define BM_CLKCTRL_CPU_DIV_XTAL	0x03FF0000
-#define BF_CLKCTRL_CPU_DIV_XTAL(v)  \
-		(((v) << 16) & BM_CLKCTRL_CPU_DIV_XTAL)
-#define BM_CLKCTRL_CPU_INTERRUPT_WAIT	0x00001000
-#define BM_CLKCTRL_CPU_DIV_CPU_FRAC_EN	0x00000400
-#define BP_CLKCTRL_CPU_DIV_CPU	0
-#define BM_CLKCTRL_CPU_DIV_CPU	0x0000003F
-#define BF_CLKCTRL_CPU_DIV_CPU(v)  \
-		(((v) << 0) & BM_CLKCTRL_CPU_DIV_CPU)
-
-#define HW_CLKCTRL_HBUS	(0x00000060)
-#define HW_CLKCTRL_HBUS_SET	(0x00000064)
-#define HW_CLKCTRL_HBUS_CLR	(0x00000068)
-#define HW_CLKCTRL_HBUS_TOG	(0x0000006c)
-
-#define BM_CLKCTRL_HBUS_ASM_BUSY	0x80000000
-#define BM_CLKCTRL_HBUS_DCP_AS_ENABLE	0x40000000
-#define BM_CLKCTRL_HBUS_PXP_AS_ENABLE	0x20000000
-#define BM_CLKCTRL_HBUS_ASM_EMIPORT_AS_ENABLE	0x08000000
-#define BM_CLKCTRL_HBUS_APBHDMA_AS_ENABLE	0x04000000
-#define BM_CLKCTRL_HBUS_APBXDMA_AS_ENABLE	0x02000000
-#define BM_CLKCTRL_HBUS_TRAFFIC_JAM_AS_ENABLE	0x01000000
-#define BM_CLKCTRL_HBUS_TRAFFIC_AS_ENABLE	0x00800000
-#define BM_CLKCTRL_HBUS_CPU_DATA_AS_ENABLE	0x00400000
-#define BM_CLKCTRL_HBUS_CPU_INSTR_AS_ENABLE	0x00200000
-#define BM_CLKCTRL_HBUS_ASM_ENABLE	0x00100000
-#define BM_CLKCTRL_HBUS_AUTO_CLEAR_DIV_ENABLE	0x00080000
-#define BP_CLKCTRL_HBUS_SLOW_DIV	16
-#define BM_CLKCTRL_HBUS_SLOW_DIV	0x00070000
-#define BF_CLKCTRL_HBUS_SLOW_DIV(v)  \
-		(((v) << 16) & BM_CLKCTRL_HBUS_SLOW_DIV)
-#define BV_CLKCTRL_HBUS_SLOW_DIV__BY1  0x0
-#define BV_CLKCTRL_HBUS_SLOW_DIV__BY2  0x1
-#define BV_CLKCTRL_HBUS_SLOW_DIV__BY4  0x2
-#define BV_CLKCTRL_HBUS_SLOW_DIV__BY8  0x3
-#define BV_CLKCTRL_HBUS_SLOW_DIV__BY16 0x4
-#define BV_CLKCTRL_HBUS_SLOW_DIV__BY32 0x5
-#define BM_CLKCTRL_HBUS_DIV_FRAC_EN	0x00000020
-#define BP_CLKCTRL_HBUS_DIV	0
-#define BM_CLKCTRL_HBUS_DIV	0x0000001F
-#define BF_CLKCTRL_HBUS_DIV(v)  \
-		(((v) << 0) & BM_CLKCTRL_HBUS_DIV)
-
-#define HW_CLKCTRL_XBUS	(0x00000070)
-
-#define BM_CLKCTRL_XBUS_BUSY	0x80000000
-#define BM_CLKCTRL_XBUS_AUTO_CLEAR_DIV_ENABLE	0x00000800
-#define BM_CLKCTRL_XBUS_DIV_FRAC_EN	0x00000400
-#define BP_CLKCTRL_XBUS_DIV	0
-#define BM_CLKCTRL_XBUS_DIV	0x000003FF
-#define BF_CLKCTRL_XBUS_DIV(v)  \
-		(((v) << 0) & BM_CLKCTRL_XBUS_DIV)
-
-#define HW_CLKCTRL_XTAL	(0x00000080)
-#define HW_CLKCTRL_XTAL_SET	(0x00000084)
-#define HW_CLKCTRL_XTAL_CLR	(0x00000088)
-#define HW_CLKCTRL_XTAL_TOG	(0x0000008c)
-
-#define BP_CLKCTRL_XTAL_UART_CLK_GATE	31
-#define BM_CLKCTRL_XTAL_UART_CLK_GATE	0x80000000
-#define BP_CLKCTRL_XTAL_PWM_CLK24M_GATE	29
-#define BM_CLKCTRL_XTAL_PWM_CLK24M_GATE	0x20000000
-#define BP_CLKCTRL_XTAL_TIMROT_CLK32K_GATE	26
-#define BM_CLKCTRL_XTAL_TIMROT_CLK32K_GATE	0x04000000
-#define BP_CLKCTRL_XTAL_DIV_UART	0
-#define BM_CLKCTRL_XTAL_DIV_UART	0x00000003
-#define BF_CLKCTRL_XTAL_DIV_UART(v)  \
-		(((v) << 0) & BM_CLKCTRL_XTAL_DIV_UART)
-
-#define HW_CLKCTRL_SSP0	(0x00000090)
-
-#define BP_CLKCTRL_SSP0_CLKGATE	31
-#define BM_CLKCTRL_SSP0_CLKGATE	0x80000000
-#define BM_CLKCTRL_SSP0_BUSY	0x20000000
-#define BM_CLKCTRL_SSP0_DIV_FRAC_EN	0x00000200
-#define BP_CLKCTRL_SSP0_DIV	0
-#define BM_CLKCTRL_SSP0_DIV	0x000001FF
-#define BF_CLKCTRL_SSP0_DIV(v)  \
-		(((v) << 0) & BM_CLKCTRL_SSP0_DIV)
-
-#define HW_CLKCTRL_SSP1	(0x000000a0)
-
-#define BP_CLKCTRL_SSP1_CLKGATE	31
-#define BM_CLKCTRL_SSP1_CLKGATE	0x80000000
-#define BM_CLKCTRL_SSP1_BUSY	0x20000000
-#define BM_CLKCTRL_SSP1_DIV_FRAC_EN	0x00000200
-#define BP_CLKCTRL_SSP1_DIV	0
-#define BM_CLKCTRL_SSP1_DIV	0x000001FF
-#define BF_CLKCTRL_SSP1_DIV(v)  \
-		(((v) << 0) & BM_CLKCTRL_SSP1_DIV)
-
-#define HW_CLKCTRL_SSP2	(0x000000b0)
-
-#define BP_CLKCTRL_SSP2_CLKGATE	31
-#define BM_CLKCTRL_SSP2_CLKGATE	0x80000000
-#define BM_CLKCTRL_SSP2_BUSY	0x20000000
-#define BM_CLKCTRL_SSP2_DIV_FRAC_EN	0x00000200
-#define BP_CLKCTRL_SSP2_DIV	0
-#define BM_CLKCTRL_SSP2_DIV	0x000001FF
-#define BF_CLKCTRL_SSP2_DIV(v)  \
-		(((v) << 0) & BM_CLKCTRL_SSP2_DIV)
-
-#define HW_CLKCTRL_SSP3	(0x000000c0)
-
-#define BP_CLKCTRL_SSP3_CLKGATE	31
-#define BM_CLKCTRL_SSP3_CLKGATE	0x80000000
-#define BM_CLKCTRL_SSP3_BUSY	0x20000000
-#define BM_CLKCTRL_SSP3_DIV_FRAC_EN	0x00000200
-#define BP_CLKCTRL_SSP3_DIV	0
-#define BM_CLKCTRL_SSP3_DIV	0x000001FF
-#define BF_CLKCTRL_SSP3_DIV(v)  \
-		(((v) << 0) & BM_CLKCTRL_SSP3_DIV)
-
-#define HW_CLKCTRL_GPMI	(0x000000d0)
-
-#define BP_CLKCTRL_GPMI_CLKGATE	31
-#define BM_CLKCTRL_GPMI_CLKGATE	0x80000000
-#define BM_CLKCTRL_GPMI_BUSY	0x20000000
-#define BM_CLKCTRL_GPMI_DIV_FRAC_EN	0x00000400
-#define BP_CLKCTRL_GPMI_DIV	0
-#define BM_CLKCTRL_GPMI_DIV	0x000003FF
-#define BF_CLKCTRL_GPMI_DIV(v)  \
-		(((v) << 0) & BM_CLKCTRL_GPMI_DIV)
-
-#define HW_CLKCTRL_SPDIF	(0x000000e0)
-
-#define BP_CLKCTRL_SPDIF_CLKGATE	31
-#define BM_CLKCTRL_SPDIF_CLKGATE	0x80000000
-
-#define HW_CLKCTRL_EMI	(0x000000f0)
-
-#define BP_CLKCTRL_EMI_CLKGATE	31
-#define BM_CLKCTRL_EMI_CLKGATE	0x80000000
-#define BM_CLKCTRL_EMI_SYNC_MODE_EN	0x40000000
-#define BM_CLKCTRL_EMI_BUSY_REF_XTAL	0x20000000
-#define BM_CLKCTRL_EMI_BUSY_REF_EMI	0x10000000
-#define BM_CLKCTRL_EMI_BUSY_REF_CPU	0x08000000
-#define BM_CLKCTRL_EMI_BUSY_SYNC_MODE	0x04000000
-#define BM_CLKCTRL_EMI_BUSY_DCC_RESYNC	0x00020000
-#define BM_CLKCTRL_EMI_DCC_RESYNC_ENABLE	0x00010000
-#define BP_CLKCTRL_EMI_DIV_XTAL	8
-#define BM_CLKCTRL_EMI_DIV_XTAL	0x00000F00
-#define BF_CLKCTRL_EMI_DIV_XTAL(v)  \
-		(((v) << 8) & BM_CLKCTRL_EMI_DIV_XTAL)
-#define BP_CLKCTRL_EMI_DIV_EMI	0
-#define BM_CLKCTRL_EMI_DIV_EMI	0x0000003F
-#define BF_CLKCTRL_EMI_DIV_EMI(v)  \
-		(((v) << 0) & BM_CLKCTRL_EMI_DIV_EMI)
-
-#define HW_CLKCTRL_SAIF0	(0x00000100)
-
-#define BP_CLKCTRL_SAIF0_CLKGATE	31
-#define BM_CLKCTRL_SAIF0_CLKGATE	0x80000000
-#define BM_CLKCTRL_SAIF0_BUSY	0x20000000
-#define BM_CLKCTRL_SAIF0_DIV_FRAC_EN	0x00010000
-#define BP_CLKCTRL_SAIF0_DIV	0
-#define BM_CLKCTRL_SAIF0_DIV	0x0000FFFF
-#define BF_CLKCTRL_SAIF0_DIV(v)  \
-		(((v) << 0) & BM_CLKCTRL_SAIF0_DIV)
-
-#define HW_CLKCTRL_SAIF1	(0x00000110)
-
-#define BP_CLKCTRL_SAIF1_CLKGATE	31
-#define BM_CLKCTRL_SAIF1_CLKGATE	0x80000000
-#define BM_CLKCTRL_SAIF1_BUSY	0x20000000
-#define BM_CLKCTRL_SAIF1_DIV_FRAC_EN	0x00010000
-#define BP_CLKCTRL_SAIF1_DIV	0
-#define BM_CLKCTRL_SAIF1_DIV	0x0000FFFF
-#define BF_CLKCTRL_SAIF1_DIV(v)  \
-		(((v) << 0) & BM_CLKCTRL_SAIF1_DIV)
-
-#define HW_CLKCTRL_DIS_LCDIF	(0x00000120)
-
-#define BP_CLKCTRL_DIS_LCDIF_CLKGATE	31
-#define BM_CLKCTRL_DIS_LCDIF_CLKGATE	0x80000000
-#define BM_CLKCTRL_DIS_LCDIF_BUSY	0x20000000
-#define BM_CLKCTRL_DIS_LCDIF_DIV_FRAC_EN	0x00002000
-#define BP_CLKCTRL_DIS_LCDIF_DIV	0
-#define BM_CLKCTRL_DIS_LCDIF_DIV	0x00001FFF
-#define BF_CLKCTRL_DIS_LCDIF_DIV(v)  \
-		(((v) << 0) & BM_CLKCTRL_DIS_LCDIF_DIV)
-
-#define HW_CLKCTRL_ETM	(0x00000130)
-
-#define BM_CLKCTRL_ETM_CLKGATE	0x80000000
-#define BM_CLKCTRL_ETM_BUSY	0x20000000
-#define BM_CLKCTRL_ETM_DIV_FRAC_EN	0x00000080
-#define BP_CLKCTRL_ETM_DIV	0
-#define BM_CLKCTRL_ETM_DIV	0x0000007F
-#define BF_CLKCTRL_ETM_DIV(v)  \
-		(((v) << 0) & BM_CLKCTRL_ETM_DIV)
-
-#define HW_CLKCTRL_ENET	(0x00000140)
-
-#define BM_CLKCTRL_ENET_SLEEP	0x80000000
-#define BP_CLKCTRL_ENET_DISABLE	30
-#define BM_CLKCTRL_ENET_DISABLE	0x40000000
-#define BM_CLKCTRL_ENET_STATUS	0x20000000
-#define BM_CLKCTRL_ENET_BUSY_TIME	0x08000000
-#define BP_CLKCTRL_ENET_DIV_TIME	21
-#define BM_CLKCTRL_ENET_DIV_TIME	0x07E00000
-#define BF_CLKCTRL_ENET_DIV_TIME(v)  \
-		(((v) << 21) & BM_CLKCTRL_ENET_DIV_TIME)
-#define BM_CLKCTRL_ENET_BUSY	0x08000000
-#define BP_CLKCTRL_ENET_DIV	21
-#define BM_CLKCTRL_ENET_DIV	0x07E00000
-#define BF_CLKCTRL_ENET_DIV(v)  \
-		(((v) << 21) & BM_CLKCTRL_ENET_DIV)
-#define BP_CLKCTRL_ENET_TIME_SEL	19
-#define BM_CLKCTRL_ENET_TIME_SEL	0x00180000
-#define BF_CLKCTRL_ENET_TIME_SEL(v)  \
-		(((v) << 19) & BM_CLKCTRL_ENET_TIME_SEL)
-#define BV_CLKCTRL_ENET_TIME_SEL__XTAL      0x0
-#define BV_CLKCTRL_ENET_TIME_SEL__PLL       0x1
-#define BV_CLKCTRL_ENET_TIME_SEL__RMII_CLK  0x2
-#define BV_CLKCTRL_ENET_TIME_SEL__UNDEFINED 0x3
-#define BM_CLKCTRL_ENET_CLK_OUT_EN	0x00040000
-#define BM_CLKCTRL_ENET_RESET_BY_SW_CHIP	0x00020000
-#define BM_CLKCTRL_ENET_RESET_BY_SW	0x00010000
-
-#define HW_CLKCTRL_HSADC	(0x00000150)
-
-#define BM_CLKCTRL_HSADC_RESETB	0x40000000
-#define BP_CLKCTRL_HSADC_FREQDIV	28
-#define BM_CLKCTRL_HSADC_FREQDIV	0x30000000
-#define BF_CLKCTRL_HSADC_FREQDIV(v)  \
-		(((v) << 28) & BM_CLKCTRL_HSADC_FREQDIV)
-
-#define HW_CLKCTRL_FLEXCAN	(0x00000160)
-
-#define BP_CLKCTRL_FLEXCAN_STOP_CAN0	30
-#define BM_CLKCTRL_FLEXCAN_STOP_CAN0	0x40000000
-#define BM_CLKCTRL_FLEXCAN_CAN0_STATUS	0x20000000
-#define BP_CLKCTRL_FLEXCAN_STOP_CAN1	28
-#define BM_CLKCTRL_FLEXCAN_STOP_CAN1	0x10000000
-#define BM_CLKCTRL_FLEXCAN_CAN1_STATUS	0x08000000
-
-#define HW_CLKCTRL_FRAC0	(0x000001b0)
-#define HW_CLKCTRL_FRAC0_SET	(0x000001b4)
-#define HW_CLKCTRL_FRAC0_CLR	(0x000001b8)
-#define HW_CLKCTRL_FRAC0_TOG	(0x000001bc)
-
-#define BP_CLKCTRL_FRAC0_CLKGATEIO0	31
-#define BM_CLKCTRL_FRAC0_CLKGATEIO0	0x80000000
-#define BM_CLKCTRL_FRAC0_IO0_STABLE	0x40000000
-#define BP_CLKCTRL_FRAC0_IO0FRAC	24
-#define BM_CLKCTRL_FRAC0_IO0FRAC	0x3F000000
-#define BF_CLKCTRL_FRAC0_IO0FRAC(v)  \
-		(((v) << 24) & BM_CLKCTRL_FRAC0_IO0FRAC)
-#define BP_CLKCTRL_FRAC0_CLKGATEIO1	23
-#define BM_CLKCTRL_FRAC0_CLKGATEIO1	0x00800000
-#define BM_CLKCTRL_FRAC0_IO1_STABLE	0x00400000
-#define BP_CLKCTRL_FRAC0_IO1FRAC	16
-#define BM_CLKCTRL_FRAC0_IO1FRAC	0x003F0000
-#define BF_CLKCTRL_FRAC0_IO1FRAC(v)  \
-		(((v) << 16) & BM_CLKCTRL_FRAC0_IO1FRAC)
-#define BP_CLKCTRL_FRAC0_CLKGATEEMI	15
-#define BM_CLKCTRL_FRAC0_CLKGATEEMI	0x00008000
-#define BM_CLKCTRL_FRAC0_EMI_STABLE	0x00004000
-#define BP_CLKCTRL_FRAC0_EMIFRAC	8
-#define BM_CLKCTRL_FRAC0_EMIFRAC	0x00003F00
-#define BF_CLKCTRL_FRAC0_EMIFRAC(v)  \
-		(((v) << 8) & BM_CLKCTRL_FRAC0_EMIFRAC)
-#define BP_CLKCTRL_FRAC0_CLKGATECPU	7
-#define BM_CLKCTRL_FRAC0_CLKGATECPU	0x00000080
-#define BM_CLKCTRL_FRAC0_CPU_STABLE	0x00000040
-#define BP_CLKCTRL_FRAC0_CPUFRAC	0
-#define BM_CLKCTRL_FRAC0_CPUFRAC	0x0000003F
-#define BF_CLKCTRL_FRAC0_CPUFRAC(v)  \
-		(((v) << 0) & BM_CLKCTRL_FRAC0_CPUFRAC)
-
-#define HW_CLKCTRL_FRAC1	(0x000001c0)
-#define HW_CLKCTRL_FRAC1_SET	(0x000001c4)
-#define HW_CLKCTRL_FRAC1_CLR	(0x000001c8)
-#define HW_CLKCTRL_FRAC1_TOG	(0x000001cc)
-
-#define BP_CLKCTRL_FRAC1_CLKGATEGPMI	23
-#define BM_CLKCTRL_FRAC1_CLKGATEGPMI	0x00800000
-#define BM_CLKCTRL_FRAC1_GPMI_STABLE	0x00400000
-#define BP_CLKCTRL_FRAC1_GPMIFRAC	16
-#define BM_CLKCTRL_FRAC1_GPMIFRAC	0x003F0000
-#define BF_CLKCTRL_FRAC1_GPMIFRAC(v)  \
-		(((v) << 16) & BM_CLKCTRL_FRAC1_GPMIFRAC)
-#define BP_CLKCTRL_FRAC1_CLKGATEHSADC	15
-#define BM_CLKCTRL_FRAC1_CLKGATEHSADC	0x00008000
-#define BM_CLKCTRL_FRAC1_HSADC_STABLE	0x00004000
-#define BP_CLKCTRL_FRAC1_HSADCFRAC	8
-#define BM_CLKCTRL_FRAC1_HSADCFRAC	0x00003F00
-#define BF_CLKCTRL_FRAC1_HSADCFRAC(v)  \
-		(((v) << 8) & BM_CLKCTRL_FRAC1_HSADCFRAC)
-#define BP_CLKCTRL_FRAC1_CLKGATEPIX	7
-#define BM_CLKCTRL_FRAC1_CLKGATEPIX	0x00000080
-#define BM_CLKCTRL_FRAC1_PIX_STABLE	0x00000040
-#define BP_CLKCTRL_FRAC1_PIXFRAC	0
-#define BM_CLKCTRL_FRAC1_PIXFRAC	0x0000003F
-#define BF_CLKCTRL_FRAC1_PIXFRAC(v)  \
-		(((v) << 0) & BM_CLKCTRL_FRAC1_PIXFRAC)
-
-#define HW_CLKCTRL_CLKSEQ	(0x000001d0)
-#define HW_CLKCTRL_CLKSEQ_SET	(0x000001d4)
-#define HW_CLKCTRL_CLKSEQ_CLR	(0x000001d8)
-#define HW_CLKCTRL_CLKSEQ_TOG	(0x000001dc)
-
-#define BM_CLKCTRL_CLKSEQ_BYPASS_CPU	0x00040000
-#define BM_CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF	0x00004000
-#define BV_CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF__BYPASS 0x1
-#define BV_CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF__PFD    0x0
-#define BM_CLKCTRL_CLKSEQ_BYPASS_ETM	0x00000100
-#define BM_CLKCTRL_CLKSEQ_BYPASS_EMI	0x00000080
-#define BM_CLKCTRL_CLKSEQ_BYPASS_SSP3	0x00000040
-#define BM_CLKCTRL_CLKSEQ_BYPASS_SSP2	0x00000020
-#define BM_CLKCTRL_CLKSEQ_BYPASS_SSP1	0x00000010
-#define BM_CLKCTRL_CLKSEQ_BYPASS_SSP0	0x00000008
-#define BM_CLKCTRL_CLKSEQ_BYPASS_GPMI	0x00000004
-#define BM_CLKCTRL_CLKSEQ_BYPASS_SAIF1	0x00000002
-#define BM_CLKCTRL_CLKSEQ_BYPASS_SAIF0	0x00000001
-
-#define HW_CLKCTRL_RESET	(0x000001e0)
-
-#define BM_CLKCTRL_RESET_WDOG_POR_DISABLE	0x00000020
-#define BM_CLKCTRL_RESET_EXTERNAL_RESET_ENABLE	0x00000010
-#define BM_CLKCTRL_RESET_THERMAL_RESET_ENABLE	0x00000008
-#define BM_CLKCTRL_RESET_THERMAL_RESET_DEFAULT	0x00000004
-#define BM_CLKCTRL_RESET_CHIP	0x00000002
-#define BM_CLKCTRL_RESET_DIG	0x00000001
-
-#define HW_CLKCTRL_STATUS	(0x000001f0)
-
-#define BP_CLKCTRL_STATUS_CPU_LIMIT	30
-#define BM_CLKCTRL_STATUS_CPU_LIMIT	0xC0000000
-#define BF_CLKCTRL_STATUS_CPU_LIMIT(v) \
-		(((v) << 30) & BM_CLKCTRL_STATUS_CPU_LIMIT)
-
-#define HW_CLKCTRL_VERSION	(0x00000200)
-
-#define BP_CLKCTRL_VERSION_MAJOR	24
-#define BM_CLKCTRL_VERSION_MAJOR	0xFF000000
-#define BF_CLKCTRL_VERSION_MAJOR(v) \
-		(((v) << 24) & BM_CLKCTRL_VERSION_MAJOR)
-#define BP_CLKCTRL_VERSION_MINOR	16
-#define BM_CLKCTRL_VERSION_MINOR	0x00FF0000
-#define BF_CLKCTRL_VERSION_MINOR(v)  \
-		(((v) << 16) & BM_CLKCTRL_VERSION_MINOR)
-#define BP_CLKCTRL_VERSION_STEP	0
-#define BM_CLKCTRL_VERSION_STEP	0x0000FFFF
-#define BF_CLKCTRL_VERSION_STEP(v)  \
-		(((v) << 0) & BM_CLKCTRL_VERSION_STEP)
-
-#endif /* __REGS_CLKCTRL_MX28_H__ */
diff --git a/arch/arm/mach-mxs/system.c b/arch/arm/mach-mxs/system.c
index 80ac1fca8a00..30042e23bfa7 100644
--- a/arch/arm/mach-mxs/system.c
+++ b/arch/arm/mach-mxs/system.c
@@ -37,8 +37,6 @@
 #define MXS_MODULE_CLKGATE		(1 << 30)
 #define MXS_MODULE_SFTRST		(1 << 31)
 
-#define CLKCTRL_TIMEOUT		10	/* 10 ms */
-
 static void __iomem *mxs_clkctrl_reset_addr;
 
 /*
@@ -139,17 +137,3 @@ error:
 	return -ETIMEDOUT;
 }
 EXPORT_SYMBOL(mxs_reset_block);
-
-int mxs_clkctrl_timeout(unsigned int reg_offset, unsigned int mask)
-{
-	unsigned long timeout = jiffies + msecs_to_jiffies(CLKCTRL_TIMEOUT);
-	while (readl_relaxed(MXS_IO_ADDRESS(MXS_CLKCTRL_BASE_ADDR)
-						+ reg_offset) & mask) {
-		if (time_after(jiffies, timeout)) {
-			pr_err("Timeout at CLKCTRL + 0x%x\n", reg_offset);
-			return -ETIMEDOUT;
-		}
-	}
-
-	return 0;
-}
diff --git a/arch/arm/mach-mxs/timer.c b/arch/arm/mach-mxs/timer.c
index 564a63279f18..02d36de9c4e8 100644
--- a/arch/arm/mach-mxs/timer.c
+++ b/arch/arm/mach-mxs/timer.c
@@ -20,6 +20,7 @@
  * MA 02110-1301, USA.
  */
 
+#include <linux/err.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/clockchips.h>
@@ -243,8 +244,16 @@ static int __init mxs_clocksource_init(struct clk *timer_clk)
 	return 0;
 }
 
-void __init mxs_timer_init(struct clk *timer_clk, int irq)
+void __init mxs_timer_init(int irq)
 {
+	struct clk *timer_clk;
+
+	timer_clk = clk_get_sys("timrot", NULL);
+	if (IS_ERR(timer_clk)) {
+		pr_err("%s: failed to get clk\n", __func__);
+		return;
+	}
+
 	clk_prepare_enable(timer_clk);
 
 	/*
diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig
index 3c5e0f522e9c..365879b47c0e 100644
--- a/arch/arm/mach-nomadik/Kconfig
+++ b/arch/arm/mach-nomadik/Kconfig
@@ -15,6 +15,7 @@ config NOMADIK_8815
 config I2C_BITBANG_8815NHK
 	tristate "Driver for bit-bang busses found on the 8815 NHK"
 	depends on I2C && MACH_NOMADIK_8815NHK
+	depends on PINCTRL_NOMADIK
 	select I2C_ALGOBIT
 	default y
 
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index dfab466ebd1d..cba3f7191cfc 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -132,6 +132,7 @@ config MACH_OMAP_PALMTT
 
 config MACH_SX1
 	bool "Siemens SX1"
+	select I2C
 	depends on ARCH_OMAP1 && ARCH_OMAP15XX
 	help
 	  Support for the Siemens SX1 phone. To boot the kernel,
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index 9923f92b5450..398e9e53e189 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -12,6 +12,9 @@ endif
 
 obj-$(CONFIG_OMAP_32K_TIMER)	+= timer32k.o
 
+# OCPI interconnect support for 1710, 1610 and 5912
+obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o
+
 # Power Management
 obj-$(CONFIG_PM) += pm.o sleep.o
 
@@ -28,13 +31,15 @@ usb-fs-$(CONFIG_USB)			:= usb.o
 obj-y					+= $(usb-fs-m) $(usb-fs-y)
 
 # Specific board support
-obj-$(CONFIG_MACH_OMAP_H2)		+= board-h2.o board-h2-mmc.o
+obj-$(CONFIG_MACH_OMAP_H2)		+= board-h2.o board-h2-mmc.o \
+					   board-nand.o
 obj-$(CONFIG_MACH_OMAP_INNOVATOR)	+= board-innovator.o
 obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o
-obj-$(CONFIG_MACH_OMAP_PERSEUS2)	+= board-perseus2.o
-obj-$(CONFIG_MACH_OMAP_FSAMPLE)		+= board-fsample.o
+obj-$(CONFIG_MACH_OMAP_PERSEUS2)	+= board-perseus2.o board-nand.o
+obj-$(CONFIG_MACH_OMAP_FSAMPLE)		+= board-fsample.o board-nand.o
 obj-$(CONFIG_MACH_OMAP_OSK)		+= board-osk.o
-obj-$(CONFIG_MACH_OMAP_H3)		+= board-h3.o board-h3-mmc.o
+obj-$(CONFIG_MACH_OMAP_H3)		+= board-h3.o board-h3-mmc.o \
+					   board-nand.o
 obj-$(CONFIG_MACH_VOICEBLUE)		+= board-voiceblue.o
 obj-$(CONFIG_MACH_OMAP_PALMTE)		+= board-palmte.o
 obj-$(CONFIG_MACH_OMAP_PALMZ71)		+= board-palmz71.o
diff --git a/arch/arm/mach-omap1/ams-delta-fiq.c b/arch/arm/mach-omap1/ams-delta-fiq.c
index fcce7ff37630..68e8e5654c0a 100644
--- a/arch/arm/mach-omap1/ams-delta-fiq.c
+++ b/arch/arm/mach-omap1/ams-delta-fiq.c
@@ -48,7 +48,7 @@ static irqreturn_t deferred_fiq(int irq, void *dev_id)
 	struct irq_chip *irq_chip = NULL;
 	int gpio, irq_num, fiq_count;
 
-	irq_desc = irq_to_desc(IH_GPIO_BASE);
+	irq_desc = irq_to_desc(gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK));
 	if (irq_desc)
 		irq_chip = irq_desc->irq_data.chip;
 
@@ -102,7 +102,7 @@ void __init ams_delta_init_fiq(void)
 	}
 
 	retval = request_irq(INT_DEFERRED_FIQ, deferred_fiq,
-			IRQ_TYPE_EDGE_RISING, "deferred_fiq", 0);
+			IRQ_TYPE_EDGE_RISING, "deferred_fiq", NULL);
 	if (retval < 0) {
 		pr_err("Failed to get deferred_fiq IRQ, ret=%d\n", retval);
 		release_fiq(&fh);
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index c1b681ef4cba..f2f8a5847018 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -595,7 +595,12 @@ gpio_free:
 	gpio_free(AMS_DELTA_GPIO_PIN_MODEM_IRQ);
 	return err;
 }
-late_initcall(late_init);
+
+static void __init ams_delta_init_late(void)
+{
+	omap1_init_late();
+	late_init();
+}
 
 static void __init ams_delta_map_io(void)
 {
@@ -611,6 +616,7 @@ MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)")
 	.reserve	= omap_reserve,
 	.init_irq	= omap1_init_irq,
 	.init_machine	= ams_delta_init,
+	.init_late	= ams_delta_init_late,
 	.timer		= &omap1_timer,
 	.restart	= omap1_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index 80bd43c7f4ec..c7364fdbda05 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -185,20 +185,6 @@ static struct platform_device nor_device = {
 	.resource	= &nor_resource,
 };
 
-static void nand_cmd_ctl(struct mtd_info *mtd, int cmd,	unsigned int ctrl)
-{
-	struct nand_chip *this = mtd->priv;
-	unsigned long mask;
-
-	if (cmd == NAND_CMD_NONE)
-		return;
-
-	mask = (ctrl & NAND_CLE) ? 0x02 : 0;
-	if (ctrl & NAND_ALE)
-		mask |= 0x04;
-	writeb(cmd, (unsigned long)this->IO_ADDR_W | mask);
-}
-
 #define FSAMPLE_NAND_RB_GPIO_PIN	62
 
 static int nand_dev_ready(struct mtd_info *mtd)
@@ -216,7 +202,7 @@ static struct platform_nand_data nand_data = {
 		.part_probe_types	= part_probes,
 	},
 	.ctrl	= {
-		.cmd_ctrl	= nand_cmd_ctl,
+		.cmd_ctrl	= omap1_nand_cmd_ctl,
 		.dev_ready	= nand_dev_ready,
 	},
 };
@@ -383,6 +369,7 @@ MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample")
 	.reserve	= omap_reserve,
 	.init_irq	= omap1_init_irq,
 	.init_machine	= omap_fsample_init,
+	.init_late	= omap1_init_late,
 	.timer		= &omap1_timer,
 	.restart	= omap1_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index 9a5fe581bc1c..e75e2d55a2d7 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -88,6 +88,7 @@ MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710")
 	.reserve	= omap_reserve,
 	.init_irq	= omap1_init_irq,
 	.init_machine	= omap_generic_init,
+	.init_late	= omap1_init_late,
 	.timer		= &omap1_timer,
 	.restart	= omap1_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 553a2e535764..7e503686f7af 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -179,20 +179,6 @@ static struct mtd_partition h2_nand_partitions[] = {
 	},
 };
 
-static void h2_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-{
-	struct nand_chip *this = mtd->priv;
-	unsigned long mask;
-
-	if (cmd == NAND_CMD_NONE)
-		return;
-
-	mask = (ctrl & NAND_CLE) ? 0x02 : 0;
-	if (ctrl & NAND_ALE)
-		mask |= 0x04;
-	writeb(cmd, (unsigned long)this->IO_ADDR_W | mask);
-}
-
 #define H2_NAND_RB_GPIO_PIN	62
 
 static int h2_nand_dev_ready(struct mtd_info *mtd)
@@ -212,9 +198,8 @@ static struct platform_nand_data h2_nand_platdata = {
 		.part_probe_types	= h2_part_probes,
 	},
 	.ctrl	= {
-		.cmd_ctrl	= h2_nand_cmd_ctl,
+		.cmd_ctrl	= omap1_nand_cmd_ctl,
 		.dev_ready	= h2_nand_dev_ready,
-
 	},
 };
 
@@ -446,6 +431,7 @@ MACHINE_START(OMAP_H2, "TI-H2")
 	.reserve	= omap_reserve,
 	.init_irq	= omap1_init_irq,
 	.init_machine	= h2_init,
+	.init_late	= omap1_init_late,
 	.timer		= &omap1_timer,
 	.restart	= omap1_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 4c19f4c06851..9fb03f189d93 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -181,20 +181,6 @@ static struct mtd_partition nand_partitions[] = {
 	},
 };
 
-static void nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-{
-	struct nand_chip *this = mtd->priv;
-	unsigned long mask;
-
-	if (cmd == NAND_CMD_NONE)
-		return;
-
-	mask = (ctrl & NAND_CLE) ? 0x02 : 0;
-	if (ctrl & NAND_ALE)
-		mask |= 0x04;
-	writeb(cmd, (unsigned long)this->IO_ADDR_W | mask);
-}
-
 #define H3_NAND_RB_GPIO_PIN	10
 
 static int nand_dev_ready(struct mtd_info *mtd)
@@ -214,7 +200,7 @@ static struct platform_nand_data nand_platdata = {
 		.part_probe_types	= part_probes,
 	},
 	.ctrl	= {
-		.cmd_ctrl	= nand_cmd_ctl,
+		.cmd_ctrl	= omap1_nand_cmd_ctl,
 		.dev_ready	= nand_dev_ready,
 
 	},
@@ -439,6 +425,7 @@ MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")
 	.reserve	= omap_reserve,
 	.init_irq	= omap1_init_irq,
 	.init_machine	= h3_init,
+	.init_late	= omap1_init_late,
 	.timer		= &omap1_timer,
 	.restart	= omap1_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index 60c06ee23855..118a9d4a4c54 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -605,6 +605,7 @@ MACHINE_START(HERALD, "HTC Herald")
 	.reserve	= omap_reserve,
 	.init_irq       = omap1_init_irq,
 	.init_machine   = htcherald_init,
+	.init_late	= omap1_init_late,
 	.timer          = &omap1_timer,
 	.restart	= omap1_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index 67d7fd57a692..7970223a559d 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -457,6 +457,7 @@ MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")
 	.reserve	= omap_reserve,
 	.init_irq	= omap1_init_irq,
 	.init_machine	= innovator_init,
+	.init_late	= omap1_init_late,
 	.timer		= &omap1_timer,
 	.restart	= omap1_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/board-nand.c b/arch/arm/mach-omap1/board-nand.c
new file mode 100644
index 000000000000..4d0835327d20
--- /dev/null
+++ b/arch/arm/mach-omap1/board-nand.c
@@ -0,0 +1,37 @@
+/*
+ * linux/arch/arm/mach-omap1/board-nand.c
+ *
+ * Common OMAP1 board NAND code
+ *
+ * Copyright (C) 2004, 2012 Texas Instruments, Inc.
+ * Copyright (C) 2002 MontaVista Software, Inc.
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Author: RidgeRun, Inc.
+ *         Greg Lonnon (glonnon@ridgerun.com) or info@ridgerun.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+
+#include "common.h"
+
+void omap1_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+	struct nand_chip *this = mtd->priv;
+	unsigned long mask;
+
+	if (cmd == NAND_CMD_NONE)
+		return;
+
+	mask = (ctrl & NAND_CLE) ? 0x02 : 0;
+	if (ctrl & NAND_ALE)
+		mask |= 0x04;
+
+	writeb(cmd, this->IO_ADDR_W + mask);
+}
+
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index d21dcc2fbc5a..7212ae97f44a 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -255,6 +255,7 @@ MACHINE_START(NOKIA770, "Nokia 770")
 	.reserve	= omap_reserve,
 	.init_irq	= omap1_init_irq,
 	.init_machine	= omap_nokia770_init,
+	.init_late	= omap1_init_late,
 	.timer		= &omap1_timer,
 	.restart	= omap1_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index a5f85dda3f69..da8d872d3d1c 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -574,6 +574,7 @@ MACHINE_START(OMAP_OSK, "TI-OSK")
 	.reserve	= omap_reserve,
 	.init_irq	= omap1_init_irq,
 	.init_machine	= osk_init,
+	.init_late	= omap1_init_late,
 	.timer		= &omap1_timer,
 	.restart	= omap1_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index a60e6c22f816..949b62a73693 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -267,6 +267,7 @@ MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E")
 	.reserve	= omap_reserve,
 	.init_irq	= omap1_init_irq,
 	.init_machine	= omap_palmte_init,
+	.init_late	= omap1_init_late,
 	.timer		= &omap1_timer,
 	.restart	= omap1_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 8d854878547b..7f1e1cf2bf46 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -313,6 +313,7 @@ MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T")
 	.reserve	= omap_reserve,
 	.init_irq	= omap1_init_irq,
 	.init_machine	= omap_palmtt_init,
+	.init_late	= omap1_init_late,
 	.timer		= &omap1_timer,
 	.restart	= omap1_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index a2c5abcd7c84..3c71c6bace2c 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -289,10 +289,10 @@ palmz71_gpio_setup(int early)
 		gpio_direction_input(PALMZ71_USBDETECT_GPIO);
 		if (request_irq(gpio_to_irq(PALMZ71_USBDETECT_GPIO),
 				palmz71_powercable, IRQF_SAMPLE_RANDOM,
-				"palmz71-cable", 0))
+				"palmz71-cable", NULL))
 			printk(KERN_ERR
 					"IRQ request for power cable failed!\n");
-		palmz71_powercable(gpio_to_irq(PALMZ71_USBDETECT_GPIO), 0);
+		palmz71_powercable(gpio_to_irq(PALMZ71_USBDETECT_GPIO), NULL);
 	}
 }
 
@@ -330,6 +330,7 @@ MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71")
 	.reserve	= omap_reserve,
 	.init_irq	= omap1_init_irq,
 	.init_machine	= omap_palmz71_init,
+	.init_late	= omap1_init_late,
 	.timer		= &omap1_timer,
 	.restart	= omap1_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 76d4ee05a814..f2cb24387c22 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -143,20 +143,6 @@ static struct platform_device nor_device = {
 	.resource	= &nor_resource,
 };
 
-static void nand_cmd_ctl(struct mtd_info *mtd, int cmd,	unsigned int ctrl)
-{
-	struct nand_chip *this = mtd->priv;
-	unsigned long mask;
-
-	if (cmd == NAND_CMD_NONE)
-		return;
-
-	mask = (ctrl & NAND_CLE) ? 0x02 : 0;
-	if (ctrl & NAND_ALE)
-		mask |= 0x04;
-	writeb(cmd, (unsigned long)this->IO_ADDR_W | mask);
-}
-
 #define P2_NAND_RB_GPIO_PIN	62
 
 static int nand_dev_ready(struct mtd_info *mtd)
@@ -174,7 +160,7 @@ static struct platform_nand_data nand_data = {
 		.part_probe_types	= part_probes,
 	},
 	.ctrl	= {
-		.cmd_ctrl	= nand_cmd_ctl,
+		.cmd_ctrl	= omap1_nand_cmd_ctl,
 		.dev_ready	= nand_dev_ready,
 	},
 };
@@ -345,6 +331,7 @@ MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")
 	.reserve	= omap_reserve,
 	.init_irq	= omap1_init_irq,
 	.init_machine	= omap_perseus2_init,
+	.init_late	= omap1_init_late,
 	.timer		= &omap1_timer,
 	.restart	= omap1_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index f34cb74a9f41..3b7b82b13684 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -407,6 +407,7 @@ MACHINE_START(SX1, "OMAP310 based Siemens SX1")
 	.reserve	= omap_reserve,
 	.init_irq	= omap1_init_irq,
 	.init_machine	= omap_sx1_init,
+	.init_late	= omap1_init_late,
 	.timer		= &omap1_timer,
 	.restart	= omap1_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 37232d04233f..afd67f0ec495 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -294,6 +294,7 @@ MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910")
 	.reserve	= omap_reserve,
 	.init_irq	= omap1_init_irq,
 	.init_machine	= voiceblue_init,
+	.init_late	= omap1_init_late,
 	.timer		= &omap1_timer,
 	.restart	= voiceblue_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 67382ddd8c83..a9ee06b6cb42 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -194,9 +194,8 @@ int omap1_select_table_rate(struct clk *clk, unsigned long rate)
 {
 	/* Find the highest supported frequency <= rate and switch to it */
 	struct mpu_rate * ptr;
-	unsigned long dpll1_rate, ref_rate;
+	unsigned long ref_rate;
 
-	dpll1_rate = ck_dpll1_p->rate;
 	ref_rate = ck_ref_p->rate;
 
 	for (ptr = omap1_rate_table; ptr->rate; ptr++) {
diff --git a/arch/arm/mach-omap1/common.h b/arch/arm/mach-omap1/common.h
index af658ad338ec..c2552b24f9f2 100644
--- a/arch/arm/mach-omap1/common.h
+++ b/arch/arm/mach-omap1/common.h
@@ -27,6 +27,7 @@
 #define __ARCH_ARM_MACH_OMAP1_COMMON_H
 
 #include <plat/common.h>
+#include <linux/mtd/mtd.h>
 
 #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
 void omap7xx_map_io(void);
@@ -52,12 +53,41 @@ static inline void omap16xx_map_io(void)
 }
 #endif
 
+#ifdef CONFIG_OMAP_SERIAL_WAKE
+int omap_serial_wakeup_init(void);
+#else
+static inline int omap_serial_wakeup_init(void)
+{
+	return 0;
+}
+#endif
+
 void omap1_init_early(void);
 void omap1_init_irq(void);
+void omap1_init_late(void);
 void omap1_restart(char, const char *);
 
+extern void __init omap_check_revision(void);
+
+extern void omap1_nand_cmd_ctl(struct mtd_info *mtd, int cmd,
+			       unsigned int ctrl);
+
 extern struct sys_timer omap1_timer;
-extern bool omap_32k_timer_init(void);
-extern void __init omap_init_consistent_dma_size(void);
+#ifdef CONFIG_OMAP_32K_TIMER
+extern int omap_32k_timer_init(void);
+#else
+static inline int __init omap_32k_timer_init(void)
+{
+	return -ENODEV;
+}
+#endif
+
+extern u32 omap_irq_flags;
+
+#ifdef CONFIG_ARCH_OMAP16XX
+extern int ocpi_enable(void);
+#else
+static inline int ocpi_enable(void) { return 0; }
+#endif
 
 #endif /* __ARCH_ARM_MACH_OMAP1_COMMON_H */
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index dcd8ddbec2bb..fa1fa4deb6aa 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -22,6 +22,7 @@
 #include <plat/tc.h>
 #include <plat/board.h>
 #include <plat/mux.h>
+#include <plat/dma.h>
 #include <plat/mmc.h>
 #include <plat/omap7xx.h>
 
@@ -31,6 +32,22 @@
 #include "common.h"
 #include "clock.h"
 
+#if defined(CONFIG_SND_SOC) || defined(CONFIG_SND_SOC_MODULE)
+
+static struct platform_device omap_pcm = {
+	.name	= "omap-pcm-audio",
+	.id	= -1,
+};
+
+static void omap_init_audio(void)
+{
+	platform_device_register(&omap_pcm);
+}
+
+#else
+static inline void omap_init_audio(void) {}
+#endif
+
 /*-------------------------------------------------------------------------*/
 
 #if defined(CONFIG_RTC_DRV_OMAP) || defined(CONFIG_RTC_DRV_OMAP_MODULE)
@@ -128,6 +145,56 @@ static inline void omap1_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
 	}
 }
 
+#define OMAP_MMC_NR_RES		4
+
+/*
+ * Register MMC devices.
+ */
+static int __init omap_mmc_add(const char *name, int id, unsigned long base,
+				unsigned long size, unsigned int irq,
+				unsigned rx_req, unsigned tx_req,
+				struct omap_mmc_platform_data *data)
+{
+	struct platform_device *pdev;
+	struct resource res[OMAP_MMC_NR_RES];
+	int ret;
+
+	pdev = platform_device_alloc(name, id);
+	if (!pdev)
+		return -ENOMEM;
+
+	memset(res, 0, OMAP_MMC_NR_RES * sizeof(struct resource));
+	res[0].start = base;
+	res[0].end = base + size - 1;
+	res[0].flags = IORESOURCE_MEM;
+	res[1].start = res[1].end = irq;
+	res[1].flags = IORESOURCE_IRQ;
+	res[2].start = rx_req;
+	res[2].name = "rx";
+	res[2].flags = IORESOURCE_DMA;
+	res[3].start = tx_req;
+	res[3].name = "tx";
+	res[3].flags = IORESOURCE_DMA;
+
+	ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
+	if (ret == 0)
+		ret = platform_device_add_data(pdev, data, sizeof(*data));
+	if (ret)
+		goto fail;
+
+	ret = platform_device_add(pdev);
+	if (ret)
+		goto fail;
+
+	/* return device handle to board setup code */
+	data->dev = &pdev->dev;
+	return 0;
+
+fail:
+	platform_device_put(pdev);
+	return ret;
+}
+
 void __init omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
 			int nr_controllers)
 {
@@ -135,6 +202,7 @@ void __init omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
 
 	for (i = 0; i < nr_controllers; i++) {
 		unsigned long base, size;
+		unsigned rx_req, tx_req;
 		unsigned int irq = 0;
 
 		if (!mmc_data[i])
@@ -146,19 +214,24 @@ void __init omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
 		case 0:
 			base = OMAP1_MMC1_BASE;
 			irq = INT_MMC;
+			rx_req = OMAP_DMA_MMC_RX;
+			tx_req = OMAP_DMA_MMC_TX;
 			break;
 		case 1:
 			if (!cpu_is_omap16xx())
 				return;
 			base = OMAP1_MMC2_BASE;
 			irq = INT_1610_MMC2;
+			rx_req = OMAP_DMA_MMC2_RX;
+			tx_req = OMAP_DMA_MMC2_TX;
 			break;
 		default:
 			continue;
 		}
 		size = OMAP1_MMC_SIZE;
 
-		omap_mmc_add("mmci-omap", i, base, size, irq, mmc_data[i]);
+		omap_mmc_add("mmci-omap", i, base, size, irq,
+				rx_req, tx_req, mmc_data[i]);
 	};
 }
 
@@ -242,23 +315,48 @@ void __init omap1_camera_init(void *info)
 
 static inline void omap_init_sti(void) {}
 
-#if defined(CONFIG_SND_SOC) || defined(CONFIG_SND_SOC_MODULE)
+/* Numbering for the SPI-capable controllers when used for SPI:
+ * spi		= 1
+ * uwire	= 2
+ * mmc1..2	= 3..4
+ * mcbsp1..3	= 5..7
+ */
 
-static struct platform_device omap_pcm = {
-	.name	= "omap-pcm-audio",
-	.id	= -1,
+#if defined(CONFIG_SPI_OMAP_UWIRE) || defined(CONFIG_SPI_OMAP_UWIRE_MODULE)
+
+#define	OMAP_UWIRE_BASE		0xfffb3000
+
+static struct resource uwire_resources[] = {
+	{
+		.start		= OMAP_UWIRE_BASE,
+		.end		= OMAP_UWIRE_BASE + 0x20,
+		.flags		= IORESOURCE_MEM,
+	},
 };
 
-static void omap_init_audio(void)
+static struct platform_device omap_uwire_device = {
+	.name	   = "omap_uwire",
+	.id	     = -1,
+	.num_resources	= ARRAY_SIZE(uwire_resources),
+	.resource	= uwire_resources,
+};
+
+static void omap_init_uwire(void)
 {
-	platform_device_register(&omap_pcm);
-}
+	/* FIXME define and use a boot tag; not all boards will be hooking
+	 * up devices to the microwire controller, and multi-board configs
+	 * mean that CONFIG_SPI_OMAP_UWIRE may be configured anyway...
+	 */
 
+	/* board-specific code must configure chipselects (only a few
+	 * are normally used) and SCLK/SDI/SDO (each has two choices).
+	 */
+	(void) platform_device_register(&omap_uwire_device);
+}
 #else
-static inline void omap_init_audio(void) {}
+static inline void omap_init_uwire(void) {}
 #endif
 
-/*-------------------------------------------------------------------------*/
 
 /*
  * This gets called after board-specific INIT_MACHINE, and initializes most
@@ -292,11 +390,12 @@ static int __init omap1_init_devices(void)
 	 * in alphabetical order so they're easier to sort through.
 	 */
 
+	omap_init_audio();
 	omap_init_mbox();
 	omap_init_rtc();
 	omap_init_spi100k();
 	omap_init_sti();
-	omap_init_audio();
+	omap_init_uwire();
 
 	return 0;
 }
diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c
index 76c67b3f9f61..29ec50fc688d 100644
--- a/arch/arm/mach-omap1/fpga.c
+++ b/arch/arm/mach-omap1/fpga.c
@@ -87,7 +87,7 @@ static void fpga_mask_ack_irq(struct irq_data *d)
 	fpga_ack_irq(d);
 }
 
-void innovator_fpga_IRQ_demux(unsigned int irq, struct irq_desc *desc)
+static void innovator_fpga_IRQ_demux(unsigned int irq, struct irq_desc *desc)
 {
 	u32 stat;
 	int fpga_irq;
diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c
index 634903ef8292..ebef15e5e7b7 100644
--- a/arch/arm/mach-omap1/gpio15xx.c
+++ b/arch/arm/mach-omap1/gpio15xx.c
@@ -46,7 +46,6 @@ static struct omap_gpio_reg_offs omap15xx_mpuio_regs = {
 };
 
 static struct __initdata omap_gpio_platform_data omap15xx_mpu_gpio_config = {
-	.virtual_irq_start	= IH_MPUIO_BASE,
 	.is_mpuio		= true,
 	.bank_width		= 16,
 	.bank_stride		= 1,
@@ -89,7 +88,6 @@ static struct omap_gpio_reg_offs omap15xx_gpio_regs = {
 };
 
 static struct __initdata omap_gpio_platform_data omap15xx_gpio_config = {
-	.virtual_irq_start	= IH_GPIO_BASE,
 	.bank_width		= 16,
 	.regs                   = &omap15xx_gpio_regs,
 };
diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c
index 1fb3b9ad496e..2a48cd2e1754 100644
--- a/arch/arm/mach-omap1/gpio16xx.c
+++ b/arch/arm/mach-omap1/gpio16xx.c
@@ -52,7 +52,6 @@ static struct omap_gpio_reg_offs omap16xx_mpuio_regs = {
 };
 
 static struct __initdata omap_gpio_platform_data omap16xx_mpu_gpio_config = {
-	.virtual_irq_start	= IH_MPUIO_BASE,
 	.is_mpuio		= true,
 	.bank_width		= 16,
 	.bank_stride		= 1,
@@ -99,7 +98,6 @@ static struct omap_gpio_reg_offs omap16xx_gpio_regs = {
 };
 
 static struct __initdata omap_gpio_platform_data omap16xx_gpio1_config = {
-	.virtual_irq_start	= IH_GPIO_BASE,
 	.bank_width		= 16,
 	.regs                   = &omap16xx_gpio_regs,
 };
@@ -128,7 +126,6 @@ static struct __initdata resource omap16xx_gpio2_resources[] = {
 };
 
 static struct __initdata omap_gpio_platform_data omap16xx_gpio2_config = {
-	.virtual_irq_start	= IH_GPIO_BASE + 16,
 	.bank_width		= 16,
 	.regs                   = &omap16xx_gpio_regs,
 };
@@ -157,7 +154,6 @@ static struct __initdata resource omap16xx_gpio3_resources[] = {
 };
 
 static struct __initdata omap_gpio_platform_data omap16xx_gpio3_config = {
-	.virtual_irq_start	= IH_GPIO_BASE + 32,
 	.bank_width		= 16,
 	.regs                   = &omap16xx_gpio_regs,
 };
@@ -186,7 +182,6 @@ static struct __initdata resource omap16xx_gpio4_resources[] = {
 };
 
 static struct __initdata omap_gpio_platform_data omap16xx_gpio4_config = {
-	.virtual_irq_start	= IH_GPIO_BASE + 48,
 	.bank_width		= 16,
 	.regs                   = &omap16xx_gpio_regs,
 };
diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c
index 4771d6b68b96..acf12b73eace 100644
--- a/arch/arm/mach-omap1/gpio7xx.c
+++ b/arch/arm/mach-omap1/gpio7xx.c
@@ -51,7 +51,6 @@ static struct omap_gpio_reg_offs omap7xx_mpuio_regs = {
 };
 
 static struct __initdata omap_gpio_platform_data omap7xx_mpu_gpio_config = {
-	.virtual_irq_start	= IH_MPUIO_BASE,
 	.is_mpuio		= true,
 	.bank_width		= 16,
 	.bank_stride		= 2,
@@ -93,7 +92,6 @@ static struct omap_gpio_reg_offs omap7xx_gpio_regs = {
 };
 
 static struct __initdata omap_gpio_platform_data omap7xx_gpio1_config = {
-	.virtual_irq_start	= IH_GPIO_BASE,
 	.bank_width		= 32,
 	.regs			= &omap7xx_gpio_regs,
 };
@@ -122,7 +120,6 @@ static struct __initdata resource omap7xx_gpio2_resources[] = {
 };
 
 static struct __initdata omap_gpio_platform_data omap7xx_gpio2_config = {
-	.virtual_irq_start	= IH_GPIO_BASE + 32,
 	.bank_width		= 32,
 	.regs			= &omap7xx_gpio_regs,
 };
@@ -151,7 +148,6 @@ static struct __initdata resource omap7xx_gpio3_resources[] = {
 };
 
 static struct __initdata omap_gpio_platform_data omap7xx_gpio3_config = {
-	.virtual_irq_start	= IH_GPIO_BASE + 64,
 	.bank_width		= 32,
 	.regs			= &omap7xx_gpio_regs,
 };
@@ -180,7 +176,6 @@ static struct __initdata resource omap7xx_gpio4_resources[] = {
 };
 
 static struct __initdata omap_gpio_platform_data omap7xx_gpio4_config = {
-	.virtual_irq_start	= IH_GPIO_BASE + 96,
 	.bank_width		= 32,
 	.regs			= &omap7xx_gpio_regs,
 };
@@ -209,7 +204,6 @@ static struct __initdata resource omap7xx_gpio5_resources[] = {
 };
 
 static struct __initdata omap_gpio_platform_data omap7xx_gpio5_config = {
-	.virtual_irq_start	= IH_GPIO_BASE + 128,
 	.bank_width		= 32,
 	.regs			= &omap7xx_gpio_regs,
 };
@@ -238,7 +232,6 @@ static struct __initdata resource omap7xx_gpio6_resources[] = {
 };
 
 static struct __initdata omap_gpio_platform_data omap7xx_gpio6_config = {
-	.virtual_irq_start	= IH_GPIO_BASE + 160,
 	.bank_width		= 32,
 	.regs			= &omap7xx_gpio_regs,
 };
diff --git a/arch/arm/mach-omap1/id.c b/arch/arm/mach-omap1/id.c
index 2b28e1da14b0..a1b846aacdaf 100644
--- a/arch/arm/mach-omap1/id.c
+++ b/arch/arm/mach-omap1/id.c
@@ -21,6 +21,8 @@
 
 #include <mach/hardware.h>
 
+#include "common.h"
+
 #define OMAP_DIE_ID_0		0xfffe1800
 #define OMAP_DIE_ID_1		0xfffe1804
 #define OMAP_PRODUCTION_ID_0	0xfffe2000
diff --git a/arch/arm/mach-omap1/include/mach/io.h b/arch/arm/mach-omap1/include/mach/io.h
new file mode 100644
index 000000000000..ce4f8005b26f
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/io.h
@@ -0,0 +1,45 @@
+/*
+ * arch/arm/mach-omap1/include/mach/io.h
+ *
+ * IO definitions for TI OMAP processors and boards
+ *
+ * Copied from arch/arm/mach-sa1100/include/mach/io.h
+ * Copyright (C) 1997-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Modifications:
+ *  06-12-1997	RMK	Created.
+ *  07-04-1999	RMK	Major cleanup
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a)		__typesafe_io(a)
+
+#endif
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index d969a7203d14..6c95a59f0f16 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -18,13 +18,12 @@
 
 #include <plat/mux.h>
 #include <plat/tc.h>
+#include <plat/dma.h>
 
 #include "iomap.h"
 #include "common.h"
 #include "clock.h"
 
-extern void omap_check_revision(void);
-
 /*
  * The machine specific code may provide the extra mapping besides the
  * default mapping provided here.
@@ -138,6 +137,11 @@ void __init omap1_init_early(void)
 	omap_init_consistent_dma_size();
 }
 
+void __init omap1_init_late(void)
+{
+	omap_serial_wakeup_init();
+}
+
 /*
  * NOTE: Please use ioremap + __raw_read/write where possible instead of these
  */
diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c
index 4448114fab72..6995fb6a3345 100644
--- a/arch/arm/mach-omap1/irq.c
+++ b/arch/arm/mach-omap1/irq.c
@@ -49,6 +49,8 @@
 
 #include <mach/hardware.h>
 
+#include "common.h"
+
 #define IRQ_BANK(irq) ((irq) >> 5)
 #define IRQ_BIT(irq)  ((irq) & 0x1f)
 
diff --git a/arch/arm/mach-omap1/lcd_dma.c b/arch/arm/mach-omap1/lcd_dma.c
index 86ace9aaa663..5769c71815b2 100644
--- a/arch/arm/mach-omap1/lcd_dma.c
+++ b/arch/arm/mach-omap1/lcd_dma.c
@@ -57,7 +57,7 @@ static struct lcd_dma_info {
 	void *cb_data;
 
 	int active;
-	unsigned long addr, size;
+	unsigned long addr;
 	int rotate, data_type, xres, yres;
 	int vxres;
 	int mirror;
@@ -77,11 +77,6 @@ void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres,
 }
 EXPORT_SYMBOL(omap_set_lcd_dma_b1);
 
-void omap_set_lcd_dma_src_port(int port)
-{
-	lcd_dma.src_port = port;
-}
-
 void omap_set_lcd_dma_ext_controller(int external)
 {
 	lcd_dma.ext_ctrl = external;
diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c
index 087dba0df47e..e9cc52d4cb28 100644
--- a/arch/arm/mach-omap1/mux.c
+++ b/arch/arm/mach-omap1/mux.c
@@ -27,6 +27,7 @@
 #include <linux/io.h>
 #include <linux/spinlock.h>
 
+#include <mach/hardware.h>
 
 #include <plat/mux.h>
 
diff --git a/arch/arm/plat-omap/ocpi.c b/arch/arm/mach-omap1/ocpi.c
index ebe0c73c8901..238170cab5b7 100644
--- a/arch/arm/plat-omap/ocpi.c
+++ b/arch/arm/mach-omap1/ocpi.c
@@ -4,6 +4,7 @@
  * Minimal OCP bus support for omap16xx
  *
  * Copyright (C) 2003 - 2005 Nokia Corporation
+ * Copyright (C) 2012 Texas Instruments, Inc.
  * Written by Tony Lindgren <tony@atomide.com>
  *
  * Modified for clock framework by Paul Mundt <paul.mundt@nokia.com>.
@@ -35,6 +36,8 @@
 
 #include <mach/hardware.h>
 
+#include "common.h"
+
 #define OCPI_BASE		0xfffec320
 #define OCPI_FAULT		(OCPI_BASE + 0x00)
 #define OCPI_CMD_FAULT		(OCPI_BASE + 0x04)
@@ -64,7 +67,7 @@ int ocpi_enable(void)
 	/* Enable access for OHCI in OCPI */
 	val = omap_readl(OCPI_PROT);
 	val &= ~0xff;
-	//val &= (1 << 0);	/* Allow access only to EMIFS */
+	/* val &= (1 << 0);	 Allow access only to EMIFS */
 	omap_writel(val, OCPI_PROT);
 
 	val = omap_readl(OCPI_SEC);
@@ -86,7 +89,7 @@ static int __init omap_ocpi_init(void)
 
 	clk_enable(ocpi_ck);
 	ocpi_enable();
-	printk("OMAP OCPI interconnect driver loaded\n");
+	pr_info("OMAP OCPI interconnect driver loaded\n");
 
 	return 0;
 }
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index f66c32912b22..b2560d32b3a0 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -569,11 +569,10 @@ static int omap_pm_read_proc(
 
 static void omap_pm_init_proc(void)
 {
-	struct proc_dir_entry *entry;
-
-	entry = create_proc_read_entry("driver/omap_pm",
-				       S_IWUSR | S_IRUGO, NULL,
-				       omap_pm_read_proc, NULL);
+	/* XXX Appears to leak memory */
+	create_proc_read_entry("driver/omap_pm",
+			       S_IWUSR | S_IRUGO, NULL,
+			       omap_pm_read_proc, NULL);
 }
 
 #endif /* DEBUG && CONFIG_PROC_FS */
diff --git a/arch/arm/mach-omap1/reset.c b/arch/arm/mach-omap1/reset.c
index f255b153b863..b17709103866 100644
--- a/arch/arm/mach-omap1/reset.c
+++ b/arch/arm/mach-omap1/reset.c
@@ -8,6 +8,8 @@
 
 #include <mach/hardware.h>
 
+#include "common.h"
+
 void omap1_restart(char mode, const char *cmd)
 {
 	/*
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index 93ae8f29727e..6809c9e56c93 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -237,7 +237,7 @@ static void __init omap_serial_set_port_wakeup(int gpio_nr)
 	enable_irq_wake(gpio_to_irq(gpio_nr));
 }
 
-static int __init omap_serial_wakeup_init(void)
+int __init omap_serial_wakeup_init(void)
 {
 	if (!cpu_is_omap16xx())
 		return 0;
@@ -251,7 +251,6 @@ static int __init omap_serial_wakeup_init(void)
 
 	return 0;
 }
-late_initcall(omap_serial_wakeup_init);
 
 #endif	/* CONFIG_OMAP_SERIAL_WAKE */
 
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index 4d8dd9a1b04c..4062480bfec7 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -232,20 +232,6 @@ static inline void omap_mpu_timer_init(void)
 }
 #endif	/* CONFIG_OMAP_MPU_TIMER */
 
-static inline int omap_32k_timer_usable(void)
-{
-	int res = false;
-
-	if (cpu_is_omap730() || cpu_is_omap15xx())
-		return res;
-
-#ifdef CONFIG_OMAP_32K_TIMER
-	res = omap_32k_timer_init();
-#endif
-
-	return res;
-}
-
 /*
  * ---------------------------------------------------------------------------
  * Timer initialization
@@ -253,7 +239,7 @@ static inline int omap_32k_timer_usable(void)
  */
 static void __init omap1_timer_init(void)
 {
-	if (!omap_32k_timer_usable())
+	if (omap_32k_timer_init() != 0)
 		omap_mpu_timer_init();
 }
 
diff --git a/arch/arm/mach-omap1/timer.c b/arch/arm/mach-omap1/timer.c
index 6e90665a7c47..64c65bcb2d67 100644
--- a/arch/arm/mach-omap1/timer.c
+++ b/arch/arm/mach-omap1/timer.c
@@ -47,15 +47,14 @@ static int omap1_dm_timer_set_src(struct platform_device *pdev,
 	int n = (pdev->id - 1) << 1;
 	u32 l;
 
-	l = __raw_readl(MOD_CONF_CTRL_1) & ~(0x03 << n);
+	l = omap_readl(MOD_CONF_CTRL_1) & ~(0x03 << n);
 	l |= source << n;
-	__raw_writel(l, MOD_CONF_CTRL_1);
+	omap_writel(l, MOD_CONF_CTRL_1);
 
 	return 0;
 }
 
-
-int __init omap1_dm_timer_init(void)
+static int __init omap1_dm_timer_init(void)
 {
 	int i;
 	int ret;
diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c
index 325b9a0aa4a0..eae49c3980c9 100644
--- a/arch/arm/mach-omap1/timer32k.c
+++ b/arch/arm/mach-omap1/timer32k.c
@@ -71,6 +71,7 @@
 
 /* 16xx specific defines */
 #define OMAP1_32K_TIMER_BASE		0xfffb9000
+#define OMAP1_32KSYNC_TIMER_BASE	0xfffbc400
 #define OMAP1_32K_TIMER_CR		0x08
 #define OMAP1_32K_TIMER_TVR		0x00
 #define OMAP1_32K_TIMER_TCR		0x04
@@ -182,10 +183,29 @@ static __init void omap_init_32k_timer(void)
  * Timer initialization
  * ---------------------------------------------------------------------------
  */
-bool __init omap_32k_timer_init(void)
+int __init omap_32k_timer_init(void)
 {
-	omap_init_clocksource_32k();
-	omap_init_32k_timer();
+	int ret = -ENODEV;
 
-	return true;
+	if (cpu_is_omap16xx()) {
+		void __iomem *base;
+		struct clk *sync32k_ick;
+
+		base = ioremap(OMAP1_32KSYNC_TIMER_BASE, SZ_1K);
+		if (!base) {
+			pr_err("32k_counter: failed to map base addr\n");
+			return -ENODEV;
+		}
+
+		sync32k_ick = clk_get(NULL, "omap_32ksync_ick");
+		if (!IS_ERR(sync32k_ick))
+			clk_enable(sync32k_ick);
+
+		ret = omap_init_clocksource_32k(base);
+	}
+
+	if (!ret)
+		omap_init_32k_timer();
+
+	return ret;
 }
diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c
index 19de03b074e3..e61afd922766 100644
--- a/arch/arm/mach-omap1/usb.c
+++ b/arch/arm/mach-omap1/usb.c
@@ -29,6 +29,8 @@
 #include <plat/mux.h>
 #include <plat/usb.h>
 
+#include "common.h"
+
 /* These routines should handle the standard chip-specific modes
  * for usb0/1/2 ports, covering basic mux and transceiver setup.
  *
@@ -138,6 +140,7 @@ static inline void ohci_device_init(struct omap_usb_config *pdata)
 	if (cpu_is_omap7xx())
 		ohci_resources[1].start = INT_7XX_USB_HHC_1;
 	pdata->ohci_device = &ohci_device;
+	pdata->ocpi_enable = &ocpi_enable;
 }
 
 #else
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 8141b76283a6..4cf5142f22cc 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -17,6 +17,7 @@ config ARCH_OMAP2PLUS_TYPICAL
 	select MENELAUS if ARCH_OMAP2
 	select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
 	select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4
+	select HIGHMEM
 	help
 	  Compile a kernel suitable for booting most boards
 
@@ -77,12 +78,12 @@ config SOC_OMAP3430
 	default y
 	select ARCH_OMAP_OTG
 
-config SOC_OMAPTI81XX
+config SOC_TI81XX
 	bool "TI81XX support"
 	depends on ARCH_OMAP3
 	default y
 
-config SOC_OMAPAM33XX
+config SOC_AM33XX
 	bool "AM33XX support"
 	depends on ARCH_OMAP3
 	default y
@@ -319,12 +320,12 @@ config MACH_OMAP_3630SDP
 
 config MACH_TI8168EVM
 	bool "TI8168 Evaluation Module"
-	depends on SOC_OMAPTI81XX
+	depends on SOC_TI81XX
 	default y
 
 config MACH_TI8148EVM
 	bool "TI8148 Evaluation Module"
-	depends on SOC_OMAPTI81XX
+	depends on SOC_TI81XX
 	default y
 
 config MACH_OMAP_4430SDP
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 49f92bc1c311..fa742f3c2629 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -4,7 +4,7 @@
 
 # Common support
 obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \
-	 common.o gpio.o dma.o wd_timer.o display.o i2c.o
+	 common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o
 
 omap-2-3-common				= irq.o sdrc.o
 hwmod-common				= omap_hwmod.o \
@@ -24,10 +24,11 @@ endif
 obj-$(CONFIG_TWL4030_CORE) += omap_twl.o
 
 # SMP support ONLY available for OMAP4
+
 obj-$(CONFIG_SMP)			+= omap-smp.o omap-headsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)		+= omap-hotplug.o
-obj-$(CONFIG_ARCH_OMAP4)		+= omap4-common.o omap-wakeupgen.o \
-					   sleep44xx.o
+obj-$(CONFIG_ARCH_OMAP4)		+= omap4-common.o omap-wakeupgen.o
+obj-$(CONFIG_ARCH_OMAP4)		+= sleep44xx.o
 
 plus_sec := $(call as-instr,.arch_extension sec,+sec)
 AFLAGS_omap-headsmp.o			:=-Wa,-march=armv7-a$(plus_sec)
@@ -64,10 +65,10 @@ endif
 ifeq ($(CONFIG_PM),y)
 obj-$(CONFIG_ARCH_OMAP2)		+= pm24xx.o
 obj-$(CONFIG_ARCH_OMAP2)		+= sleep24xx.o
-obj-$(CONFIG_ARCH_OMAP3)		+= pm34xx.o sleep34xx.o \
-					   cpuidle34xx.o
-obj-$(CONFIG_ARCH_OMAP4)		+= pm44xx.o omap-mpuss-lowpower.o \
-					   cpuidle44xx.o
+obj-$(CONFIG_ARCH_OMAP3)		+= pm34xx.o sleep34xx.o
+obj-$(CONFIG_ARCH_OMAP3)		+= cpuidle34xx.o
+obj-$(CONFIG_ARCH_OMAP4)		+= pm44xx.o omap-mpuss-lowpower.o
+obj-$(CONFIG_ARCH_OMAP4)		+= cpuidle44xx.o
 obj-$(CONFIG_PM_DEBUG)			+= pm-debug.o
 obj-$(CONFIG_OMAP_SMARTREFLEX)          += sr_device.o smartreflex.o
 obj-$(CONFIG_OMAP_SMARTREFLEX_CLASS3)	+= smartreflex-class3.o
@@ -84,88 +85,86 @@ endif
 # PRCM
 obj-y					+= prm_common.o
 obj-$(CONFIG_ARCH_OMAP2)		+= prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
-obj-$(CONFIG_ARCH_OMAP3)		+= prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o \
-					   vc3xxx_data.o vp3xxx_data.o
-# XXX The presence of cm2xxx_3xxx.o on the line below is temporary and
-# will be removed once the OMAP4 part of the codebase is converted to
-# use OMAP4-specific PRCM functions.
-obj-$(CONFIG_ARCH_OMAP4)		+= prcm.o cm2xxx_3xxx.o cminst44xx.o \
-					   cm44xx.o prcm_mpu44xx.o \
-					   prminst44xx.o vc44xx_data.o \
-					   vp44xx_data.o prm44xx.o
+obj-$(CONFIG_ARCH_OMAP3)		+= prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
+obj-$(CONFIG_ARCH_OMAP3)		+= vc3xxx_data.o vp3xxx_data.o
+obj-$(CONFIG_ARCH_OMAP4)		+= prcm.o cminst44xx.o cm44xx.o
+obj-$(CONFIG_ARCH_OMAP4)		+= prcm_mpu44xx.o prminst44xx.o
+obj-$(CONFIG_ARCH_OMAP4)		+= vc44xx_data.o vp44xx_data.o prm44xx.o
 
 # OMAP voltage domains
 voltagedomain-common			:= voltage.o vc.o vp.o
-obj-$(CONFIG_ARCH_OMAP2)		+= $(voltagedomain-common) \
-					   voltagedomains2xxx_data.o
-obj-$(CONFIG_ARCH_OMAP3)		+= $(voltagedomain-common) \
-					   voltagedomains3xxx_data.o
-obj-$(CONFIG_ARCH_OMAP4)		+= $(voltagedomain-common) \
-					   voltagedomains44xx_data.o
+obj-$(CONFIG_ARCH_OMAP2)		+= $(voltagedomain-common)
+obj-$(CONFIG_ARCH_OMAP2)		+= voltagedomains2xxx_data.o
+obj-$(CONFIG_ARCH_OMAP3)		+= $(voltagedomain-common)
+obj-$(CONFIG_ARCH_OMAP3)		+= voltagedomains3xxx_data.o
+obj-$(CONFIG_ARCH_OMAP4)		+= $(voltagedomain-common)
+obj-$(CONFIG_ARCH_OMAP4)		+= voltagedomains44xx_data.o
 
 # OMAP powerdomain framework
 powerdomain-common			+= powerdomain.o powerdomain-common.o
-obj-$(CONFIG_ARCH_OMAP2)		+= $(powerdomain-common) \
-					   powerdomain2xxx_3xxx.o \
-					   powerdomains2xxx_data.o \
-					   powerdomains2xxx_3xxx_data.o
-obj-$(CONFIG_ARCH_OMAP3)		+= $(powerdomain-common) \
-					   powerdomain2xxx_3xxx.o \
-					   powerdomains3xxx_data.o \
-					   powerdomains2xxx_3xxx_data.o
-obj-$(CONFIG_ARCH_OMAP4)		+= $(powerdomain-common) \
-					   powerdomain44xx.o \
-					   powerdomains44xx_data.o
+obj-$(CONFIG_ARCH_OMAP2)		+= $(powerdomain-common)
+obj-$(CONFIG_ARCH_OMAP2)		+= powerdomains2xxx_data.o
+obj-$(CONFIG_ARCH_OMAP2)		+= powerdomain2xxx_3xxx.o
+obj-$(CONFIG_ARCH_OMAP2)		+= powerdomains2xxx_3xxx_data.o
+obj-$(CONFIG_ARCH_OMAP3)		+= $(powerdomain-common)
+obj-$(CONFIG_ARCH_OMAP3)		+= powerdomain2xxx_3xxx.o
+obj-$(CONFIG_ARCH_OMAP3)		+= powerdomains3xxx_data.o
+obj-$(CONFIG_ARCH_OMAP3)		+= powerdomains2xxx_3xxx_data.o
+obj-$(CONFIG_ARCH_OMAP4)		+= $(powerdomain-common)
+obj-$(CONFIG_ARCH_OMAP4)		+= powerdomain44xx.o
+obj-$(CONFIG_ARCH_OMAP4)		+= powerdomains44xx_data.o
 
 # PRCM clockdomain control
-obj-$(CONFIG_ARCH_OMAP2)		+= clockdomain.o \
-					   clockdomain2xxx_3xxx.o \
-					   clockdomains2xxx_3xxx_data.o
+clockdomain-common			+= clockdomain.o
+clockdomain-common			+= clockdomains_common_data.o
+obj-$(CONFIG_ARCH_OMAP2)		+= $(clockdomain-common)
+obj-$(CONFIG_ARCH_OMAP2)		+= clockdomain2xxx_3xxx.o
+obj-$(CONFIG_ARCH_OMAP2)		+= clockdomains2xxx_3xxx_data.o
 obj-$(CONFIG_SOC_OMAP2420)		+= clockdomains2420_data.o
 obj-$(CONFIG_SOC_OMAP2430)		+= clockdomains2430_data.o
-obj-$(CONFIG_ARCH_OMAP3)		+= clockdomain.o \
-					   clockdomain2xxx_3xxx.o \
-					   clockdomains2xxx_3xxx_data.o \
-					   clockdomains3xxx_data.o
-obj-$(CONFIG_ARCH_OMAP4)		+= clockdomain.o \
-					   clockdomain44xx.o \
-					   clockdomains44xx_data.o
+obj-$(CONFIG_ARCH_OMAP3)		+= $(clockdomain-common)
+obj-$(CONFIG_ARCH_OMAP3)		+= clockdomain2xxx_3xxx.o
+obj-$(CONFIG_ARCH_OMAP3)		+= clockdomains2xxx_3xxx_data.o
+obj-$(CONFIG_ARCH_OMAP3)		+= clockdomains3xxx_data.o
+obj-$(CONFIG_ARCH_OMAP4)		+= $(clockdomain-common)
+obj-$(CONFIG_ARCH_OMAP4)		+= clockdomain44xx.o
+obj-$(CONFIG_ARCH_OMAP4)		+= clockdomains44xx_data.o
 
 # Clock framework
-obj-$(CONFIG_ARCH_OMAP2)		+= $(clock-common) clock2xxx.o \
-					   clkt2xxx_sys.o \
-					   clkt2xxx_dpllcore.o \
-					   clkt2xxx_virt_prcm_set.o \
-					   clkt2xxx_apll.o clkt2xxx_osc.o \
-					   clkt2xxx_dpll.o clkt_iclk.o
+obj-$(CONFIG_ARCH_OMAP2)		+= $(clock-common) clock2xxx.o
+obj-$(CONFIG_ARCH_OMAP2)		+= clkt2xxx_sys.o
+obj-$(CONFIG_ARCH_OMAP2)		+= clkt2xxx_dpllcore.o
+obj-$(CONFIG_ARCH_OMAP2)		+= clkt2xxx_virt_prcm_set.o
+obj-$(CONFIG_ARCH_OMAP2)		+= clkt2xxx_apll.o clkt2xxx_osc.o
+obj-$(CONFIG_ARCH_OMAP2)		+= clkt2xxx_dpll.o clkt_iclk.o
 obj-$(CONFIG_SOC_OMAP2420)		+= clock2420_data.o
 obj-$(CONFIG_SOC_OMAP2430)		+= clock2430.o clock2430_data.o
-obj-$(CONFIG_ARCH_OMAP3)		+= $(clock-common) clock3xxx.o \
-					   clock34xx.o clkt34xx_dpll3m2.o \
-					   clock3517.o clock36xx.o \
-					   dpll3xxx.o clock3xxx_data.o \
-					   clkt_iclk.o
-obj-$(CONFIG_ARCH_OMAP4)		+= $(clock-common) clock44xx_data.o \
-					   dpll3xxx.o dpll44xx.o
+obj-$(CONFIG_ARCH_OMAP3)		+= $(clock-common) clock3xxx.o
+obj-$(CONFIG_ARCH_OMAP3)		+= clock34xx.o clkt34xx_dpll3m2.o
+obj-$(CONFIG_ARCH_OMAP3)		+= clock3517.o clock36xx.o
+obj-$(CONFIG_ARCH_OMAP3)		+= dpll3xxx.o clock3xxx_data.o
+obj-$(CONFIG_ARCH_OMAP3)		+= clkt_iclk.o
+obj-$(CONFIG_ARCH_OMAP4)		+= $(clock-common) clock44xx_data.o
+obj-$(CONFIG_ARCH_OMAP4)		+= dpll3xxx.o dpll44xx.o
 
 # OMAP2 clock rate set data (old "OPP" data)
 obj-$(CONFIG_SOC_OMAP2420)		+= opp2420_data.o
 obj-$(CONFIG_SOC_OMAP2430)		+= opp2430_data.o
 
 # hwmod data
-obj-$(CONFIG_SOC_OMAP2420)		+= omap_hwmod_2xxx_ipblock_data.o \
-					   omap_hwmod_2xxx_3xxx_ipblock_data.o \
-					   omap_hwmod_2xxx_interconnect_data.o \
-					   omap_hwmod_2xxx_3xxx_interconnect_data.o \
-					   omap_hwmod_2420_data.o
-obj-$(CONFIG_SOC_OMAP2430)		+= omap_hwmod_2xxx_ipblock_data.o \
-					   omap_hwmod_2xxx_3xxx_ipblock_data.o \
-					   omap_hwmod_2xxx_interconnect_data.o \
-					   omap_hwmod_2xxx_3xxx_interconnect_data.o \
-					   omap_hwmod_2430_data.o
-obj-$(CONFIG_ARCH_OMAP3)		+= omap_hwmod_2xxx_3xxx_ipblock_data.o \
-					   omap_hwmod_2xxx_3xxx_interconnect_data.o \
-					   omap_hwmod_3xxx_data.o
+obj-$(CONFIG_SOC_OMAP2420)		+= omap_hwmod_2xxx_ipblock_data.o
+obj-$(CONFIG_SOC_OMAP2420)		+= omap_hwmod_2xxx_3xxx_ipblock_data.o
+obj-$(CONFIG_SOC_OMAP2420)		+= omap_hwmod_2xxx_interconnect_data.o
+obj-$(CONFIG_SOC_OMAP2420)		+= omap_hwmod_2xxx_3xxx_interconnect_data.o
+obj-$(CONFIG_SOC_OMAP2420)		+= omap_hwmod_2420_data.o
+obj-$(CONFIG_SOC_OMAP2430)		+= omap_hwmod_2xxx_ipblock_data.o
+obj-$(CONFIG_SOC_OMAP2430)		+= omap_hwmod_2xxx_3xxx_ipblock_data.o
+obj-$(CONFIG_SOC_OMAP2430)		+= omap_hwmod_2xxx_interconnect_data.o
+obj-$(CONFIG_SOC_OMAP2430)		+= omap_hwmod_2xxx_3xxx_interconnect_data.o
+obj-$(CONFIG_SOC_OMAP2430)		+= omap_hwmod_2430_data.o
+obj-$(CONFIG_ARCH_OMAP3)		+= omap_hwmod_2xxx_3xxx_ipblock_data.o
+obj-$(CONFIG_ARCH_OMAP3)		+= omap_hwmod_2xxx_3xxx_interconnect_data.o
+obj-$(CONFIG_ARCH_OMAP3)		+= omap_hwmod_3xxx_data.o
 obj-$(CONFIG_ARCH_OMAP4)		+= omap_hwmod_44xx_data.o
 
 # EMU peripherals
@@ -187,6 +186,9 @@ ifneq ($(CONFIG_TIDSPBRIDGE),)
 obj-y					+= dsp.o
 endif
 
+# OMAP2420 MSDI controller integration support ("MMC")
+obj-$(CONFIG_SOC_OMAP2420)		+= msdi.o
+
 # Specific board support
 obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o
 obj-$(CONFIG_MACH_OMAP_H4)		+= board-h4.o
@@ -203,23 +205,19 @@ obj-$(CONFIG_MACH_OMAP3EVM)		+= board-omap3evm.o
 obj-$(CONFIG_MACH_OMAP3_PANDORA)	+= board-omap3pandora.o
 obj-$(CONFIG_MACH_OMAP_3430SDP)		+= board-3430sdp.o
 obj-$(CONFIG_MACH_NOKIA_N8X0)		+= board-n8x0.o
-obj-$(CONFIG_MACH_NOKIA_RM680)		+= board-rm680.o \
-					   sdram-nokia.o
-obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51.o \
-					   sdram-nokia.o \
-					   board-rx51-peripherals.o \
-					   board-rx51-video.o
-obj-$(CONFIG_MACH_OMAP_ZOOM2)		+= board-zoom.o \
-					   board-zoom-peripherals.o \
-					   board-zoom-display.o \
-					   board-zoom-debugboard.o
-obj-$(CONFIG_MACH_OMAP_ZOOM3)		+= board-zoom.o \
-					   board-zoom-peripherals.o \
-					   board-zoom-display.o \
-					   board-zoom-debugboard.o
-obj-$(CONFIG_MACH_OMAP_3630SDP)		+= board-3630sdp.o \
-					   board-zoom-peripherals.o \
-					   board-zoom-display.o
+obj-$(CONFIG_MACH_NOKIA_RM680)		+= board-rm680.o sdram-nokia.o
+obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51.o sdram-nokia.o
+obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51-peripherals.o
+obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51-video.o
+obj-$(CONFIG_MACH_OMAP_ZOOM2)		+= board-zoom.o board-zoom-peripherals.o
+obj-$(CONFIG_MACH_OMAP_ZOOM2)		+= board-zoom-display.o
+obj-$(CONFIG_MACH_OMAP_ZOOM2)		+= board-zoom-debugboard.o
+obj-$(CONFIG_MACH_OMAP_ZOOM3)		+= board-zoom.o board-zoom-peripherals.o
+obj-$(CONFIG_MACH_OMAP_ZOOM3)		+= board-zoom-display.o
+obj-$(CONFIG_MACH_OMAP_ZOOM3)		+= board-zoom-debugboard.o
+obj-$(CONFIG_MACH_OMAP_3630SDP)		+= board-3630sdp.o
+obj-$(CONFIG_MACH_OMAP_3630SDP)		+= board-zoom-peripherals.o
+obj-$(CONFIG_MACH_OMAP_3630SDP)		+= board-zoom-display.o
 obj-$(CONFIG_MACH_CM_T35)		+= board-cm-t35.o
 obj-$(CONFIG_MACH_CM_T3517)		+= board-cm-t3517.o
 obj-$(CONFIG_MACH_IGEP0020)		+= board-igep0020.o
diff --git a/arch/arm/mach-omap2/am35xx-emac.c b/arch/arm/mach-omap2/am35xx-emac.c
index 1f97e7475206..447682c4e11c 100644
--- a/arch/arm/mach-omap2/am35xx-emac.c
+++ b/arch/arm/mach-omap2/am35xx-emac.c
@@ -39,26 +39,23 @@ static struct platform_device am35xx_emac_mdio_device = {
 
 static void am35xx_enable_emac_int(void)
 {
-	u32 regval;
-
-	regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
-	regval = (regval | AM35XX_CPGMAC_C0_RX_PULSE_CLR |
-		  AM35XX_CPGMAC_C0_TX_PULSE_CLR |
-		  AM35XX_CPGMAC_C0_MISC_PULSE_CLR |
-		  AM35XX_CPGMAC_C0_RX_THRESH_CLR);
-	omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR);
-	regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+	u32 v;
+
+	v = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+	v |= (AM35XX_CPGMAC_C0_RX_PULSE_CLR | AM35XX_CPGMAC_C0_TX_PULSE_CLR |
+	      AM35XX_CPGMAC_C0_MISC_PULSE_CLR | AM35XX_CPGMAC_C0_RX_THRESH_CLR);
+	omap_ctrl_writel(v, AM35XX_CONTROL_LVL_INTR_CLEAR);
+	omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); /* OCP barrier */
 }
 
 static void am35xx_disable_emac_int(void)
 {
-	u32 regval;
+	u32 v;
 
-	regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
-	regval = (regval | AM35XX_CPGMAC_C0_RX_PULSE_CLR |
-		  AM35XX_CPGMAC_C0_TX_PULSE_CLR);
-	omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR);
-	regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+	v = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+	v |= (AM35XX_CPGMAC_C0_RX_PULSE_CLR | AM35XX_CPGMAC_C0_TX_PULSE_CLR);
+	omap_ctrl_writel(v, AM35XX_CONTROL_LVL_INTR_CLEAR);
+	omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); /* OCP barrier */
 }
 
 static struct emac_platform_data am35xx_emac_pdata = {
@@ -92,7 +89,7 @@ static struct platform_device am35xx_emac_device = {
 
 void __init am35xx_emac_init(unsigned long mdio_bus_freq, u8 rmii_en)
 {
-	unsigned int regval;
+	u32 v;
 	int err;
 
 	am35xx_emac_pdata.rmii_en = rmii_en;
@@ -110,8 +107,8 @@ void __init am35xx_emac_init(unsigned long mdio_bus_freq, u8 rmii_en)
 		return;
 	}
 
-	regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
-	regval = regval & (~(AM35XX_CPGMACSS_SW_RST));
-	omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET);
-	regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
+	v = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
+	v &= ~AM35XX_CPGMACSS_SW_RST;
+	omap_ctrl_writel(v, AM35XX_CONTROL_IP_SW_RESET);
+	omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); /* OCP barrier */
 }
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index e658f835d0de..99ca6bad5c30 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -303,6 +303,7 @@ MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board")
 	.init_irq	= omap2_init_irq,
 	.handle_irq	= omap2_intc_handle_irq,
 	.init_machine	= omap_2430sdp_init,
+	.init_late	= omap2430_init_late,
 	.timer		= &omap2_timer,
 	.restart	= omap_prcm_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index da75f239873e..a98c688058a9 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -37,7 +37,7 @@
 #include <plat/dma.h>
 #include <plat/gpmc.h>
 #include <video/omapdss.h>
-#include <video/omap-panel-dvi.h>
+#include <video/omap-panel-tfp410.h>
 
 #include <plat/gpmc-smc91x.h>
 
@@ -113,9 +113,6 @@ static struct gpio sdp3430_dss_gpios[] __initdata = {
 	{SDP3430_LCD_PANEL_BACKLIGHT_GPIO, GPIOF_OUT_INIT_LOW, "LCD Backlight"},
 };
 
-static int lcd_enabled;
-static int dvi_enabled;
-
 static void __init sdp3430_display_init(void)
 {
 	int r;
@@ -129,44 +126,18 @@ static void __init sdp3430_display_init(void)
 
 static int sdp3430_panel_enable_lcd(struct omap_dss_device *dssdev)
 {
-	if (dvi_enabled) {
-		printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
-		return -EINVAL;
-	}
-
 	gpio_direction_output(SDP3430_LCD_PANEL_ENABLE_GPIO, 1);
 	gpio_direction_output(SDP3430_LCD_PANEL_BACKLIGHT_GPIO, 1);
 
-	lcd_enabled = 1;
-
 	return 0;
 }
 
 static void sdp3430_panel_disable_lcd(struct omap_dss_device *dssdev)
 {
-	lcd_enabled = 0;
-
 	gpio_direction_output(SDP3430_LCD_PANEL_ENABLE_GPIO, 0);
 	gpio_direction_output(SDP3430_LCD_PANEL_BACKLIGHT_GPIO, 0);
 }
 
-static int sdp3430_panel_enable_dvi(struct omap_dss_device *dssdev)
-{
-	if (lcd_enabled) {
-		printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
-		return -EINVAL;
-	}
-
-	dvi_enabled = 1;
-
-	return 0;
-}
-
-static void sdp3430_panel_disable_dvi(struct omap_dss_device *dssdev)
-{
-	dvi_enabled = 0;
-}
-
 static int sdp3430_panel_enable_tv(struct omap_dss_device *dssdev)
 {
 	return 0;
@@ -186,15 +157,14 @@ static struct omap_dss_device sdp3430_lcd_device = {
 	.platform_disable	= sdp3430_panel_disable_lcd,
 };
 
-static struct panel_dvi_platform_data dvi_panel = {
-	.platform_enable	= sdp3430_panel_enable_dvi,
-	.platform_disable	= sdp3430_panel_disable_dvi,
+static struct tfp410_platform_data dvi_panel = {
+	.power_down_gpio	= -1,
 };
 
 static struct omap_dss_device sdp3430_dvi_device = {
 	.name			= "dvi",
 	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.driver_name		= "dvi",
+	.driver_name		= "tfp410",
 	.data			= &dvi_panel,
 	.phy.dpi.data_lines	= 24,
 };
@@ -635,6 +605,7 @@ MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
 	.init_irq	= omap3_init_irq,
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap_3430sdp_init,
+	.init_late	= omap3430_init_late,
 	.timer		= &omap3_timer,
 	.restart	= omap_prcm_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
index 6ef350d1ae4f..2dc9ba523c7a 100644
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -217,6 +217,7 @@ MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board")
 	.init_irq	= omap3_init_irq,
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap_sdp_init,
+	.init_late	= omap3630_init_late,
 	.timer		= &omap3_timer,
 	.restart	= omap_prcm_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index a39fc4bbd2b8..8e17284a803f 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -20,6 +20,7 @@
 #include <linux/usb/otg.h>
 #include <linux/spi/spi.h>
 #include <linux/i2c/twl.h>
+#include <linux/mfd/twl6040.h>
 #include <linux/gpio_keys.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/fixed.h>
@@ -383,6 +384,11 @@ static struct platform_device sdp4430_dmic_codec = {
 	.id	= -1,
 };
 
+static struct platform_device sdp4430_hdmi_audio_codec = {
+	.name	= "hdmi-audio-codec",
+	.id	= -1,
+};
+
 static struct omap_abe_twl6040_data sdp4430_abe_audio_data = {
 	.card_name = "SDP4430",
 	.has_hs		= ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
@@ -417,6 +423,7 @@ static struct platform_device *sdp4430_devices[] __initdata = {
 	&sdp4430_vbat,
 	&sdp4430_dmic_codec,
 	&sdp4430_abe_audio,
+	&sdp4430_hdmi_audio_codec,
 };
 
 static struct omap_musb_board_data musb_board_data = {
@@ -488,50 +495,6 @@ static struct platform_device omap_vwlan_device = {
 	},
 };
 
-static int omap4_twl6030_hsmmc_late_init(struct device *dev)
-{
-	int irq = 0;
-	struct platform_device *pdev = container_of(dev,
-				struct platform_device, dev);
-	struct omap_mmc_platform_data *pdata = dev->platform_data;
-
-	/* Setting MMC1 Card detect Irq */
-	if (pdev->id == 0) {
-		irq = twl6030_mmc_card_detect_config();
-		if (irq < 0) {
-			pr_err("Failed configuring MMC1 card detect\n");
-			return irq;
-		}
-		pdata->slots[0].card_detect_irq = irq;
-		pdata->slots[0].card_detect = twl6030_mmc_card_detect;
-	}
-	return 0;
-}
-
-static __init void omap4_twl6030_hsmmc_set_late_init(struct device *dev)
-{
-	struct omap_mmc_platform_data *pdata;
-
-	/* dev can be null if CONFIG_MMC_OMAP_HS is not set */
-	if (!dev) {
-		pr_err("Failed %s\n", __func__);
-		return;
-	}
-	pdata = dev->platform_data;
-	pdata->init =	omap4_twl6030_hsmmc_late_init;
-}
-
-static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
-{
-	struct omap2_hsmmc_info *c;
-
-	omap_hsmmc_init(controllers);
-	for (c = controllers; c->mmc; c++)
-		omap4_twl6030_hsmmc_set_late_init(&c->pdev->dev);
-
-	return 0;
-}
-
 static struct regulator_init_data sdp4430_vaux1 = {
 	.constraints = {
 		.min_uV			= 1000000,
@@ -560,7 +523,7 @@ static struct regulator_init_data sdp4430_vusim = {
 	},
 };
 
-static struct twl4030_codec_data twl6040_codec = {
+static struct twl6040_codec_data twl6040_codec = {
 	/* single-step ramp for headset and handsfree */
 	.hs_left_step	= 0x0f,
 	.hs_right_step	= 0x0f,
@@ -568,7 +531,7 @@ static struct twl4030_codec_data twl6040_codec = {
 	.hf_right_step	= 0x1d,
 };
 
-static struct twl4030_vibra_data twl6040_vibra = {
+static struct twl6040_vibra_data twl6040_vibra = {
 	.vibldrv_res = 8,
 	.vibrdrv_res = 3,
 	.viblmotor_res = 10,
@@ -577,16 +540,14 @@ static struct twl4030_vibra_data twl6040_vibra = {
 	.vddvibr_uV = 0,	/* fixed volt supply - VBAT */
 };
 
-static struct twl4030_audio_data twl6040_audio = {
+static struct twl6040_platform_data twl6040_data = {
 	.codec		= &twl6040_codec,
 	.vibra		= &twl6040_vibra,
 	.audpwron_gpio	= 127,
-	.naudint_irq	= OMAP44XX_IRQ_SYS_2N,
 	.irq_base	= TWL6040_CODEC_IRQ_BASE,
 };
 
 static struct twl4030_platform_data sdp4430_twldata = {
-	.audio		= &twl6040_audio,
 	/* Regulators */
 	.vusim		= &sdp4430_vusim,
 	.vaux1		= &sdp4430_vaux1,
@@ -616,8 +577,11 @@ static int __init omap4_i2c_init(void)
 			TWL_COMMON_REGULATOR_VANA |
 			TWL_COMMON_REGULATOR_VCXIO |
 			TWL_COMMON_REGULATOR_VUSB |
-			TWL_COMMON_REGULATOR_CLK32KG);
-	omap4_pmic_init("twl6030", &sdp4430_twldata);
+			TWL_COMMON_REGULATOR_CLK32KG |
+			TWL_COMMON_REGULATOR_V1V8 |
+			TWL_COMMON_REGULATOR_V2V1);
+	omap4_pmic_init("twl6030", &sdp4430_twldata,
+			&twl6040_data, OMAP44XX_IRQ_SYS_2N);
 	omap_register_i2c_bus(2, 400, NULL, 0);
 	omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo,
 				ARRAY_SIZE(sdp4430_i2c_3_boardinfo));
@@ -666,6 +630,10 @@ static struct nokia_dsi_panel_data dsi1_panel = {
 		.use_ext_te	= false,
 		.ext_te_gpio	= 101,
 		.esd_interval	= 0,
+		.pin_config = {
+			.num_pins	= 6,
+			.pins		= { 0, 1, 2, 3, 4, 5 },
+		},
 };
 
 static struct omap_dss_device sdp4430_lcd_device = {
@@ -674,13 +642,6 @@ static struct omap_dss_device sdp4430_lcd_device = {
 	.type			= OMAP_DISPLAY_TYPE_DSI,
 	.data			= &dsi1_panel,
 	.phy.dsi		= {
-		.clk_lane	= 1,
-		.clk_pol	= 0,
-		.data1_lane	= 2,
-		.data1_pol	= 0,
-		.data2_lane	= 3,
-		.data2_pol	= 0,
-
 		.module		= 0,
 	},
 
@@ -715,6 +676,10 @@ static struct nokia_dsi_panel_data dsi2_panel = {
 		.use_ext_te	= false,
 		.ext_te_gpio	= 103,
 		.esd_interval	= 0,
+		.pin_config = {
+			.num_pins	= 6,
+			.pins		= { 0, 1, 2, 3, 4, 5 },
+		},
 };
 
 static struct omap_dss_device sdp4430_lcd2_device = {
@@ -723,12 +688,6 @@ static struct omap_dss_device sdp4430_lcd2_device = {
 	.type			= OMAP_DISPLAY_TYPE_DSI,
 	.data			= &dsi2_panel,
 	.phy.dsi		= {
-		.clk_lane	= 1,
-		.clk_pol	= 0,
-		.data1_lane	= 2,
-		.data1_pol	= 0,
-		.data2_lane	= 3,
-		.data2_pol	= 0,
 
 		.module		= 1,
 	},
@@ -758,21 +717,6 @@ static struct omap_dss_device sdp4430_lcd2_device = {
 	.channel		= OMAP_DSS_CHANNEL_LCD2,
 };
 
-static void sdp4430_lcd_init(void)
-{
-	int r;
-
-	r = gpio_request_one(dsi1_panel.reset_gpio, GPIOF_DIR_OUT,
-		"lcd1_reset_gpio");
-	if (r)
-		pr_err("%s: Could not get lcd1_reset_gpio\n", __func__);
-
-	r = gpio_request_one(dsi2_panel.reset_gpio, GPIOF_DIR_OUT,
-		"lcd2_reset_gpio");
-	if (r)
-		pr_err("%s: Could not get lcd2_reset_gpio\n", __func__);
-}
-
 static struct omap_dss_hdmi_data sdp4430_hdmi_data = {
 	.hpd_gpio = HDMI_GPIO_HPD,
 };
@@ -858,7 +802,6 @@ static void __init omap_4430sdp_display_init(void)
 	if (r)
 		pr_err("%s: Could not get display_sel GPIO\n", __func__);
 
-	sdp4430_lcd_init();
 	sdp4430_picodlp_init();
 	omap_display_init(&sdp4430_dss_data);
 	/*
@@ -969,6 +912,7 @@ MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
 	.init_irq	= gic_init_irq,
 	.handle_irq	= gic_handle_irq,
 	.init_machine	= omap_4430sdp_init,
+	.init_late	= omap4430_init_late,
 	.timer		= &omap4_timer,
 	.restart	= omap_prcm_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c
index c3851e8de28b..92432c28673d 100644
--- a/arch/arm/mach-omap2/board-am3517crane.c
+++ b/arch/arm/mach-omap2/board-am3517crane.c
@@ -30,6 +30,7 @@
 #include "common.h"
 #include <plat/usb.h>
 
+#include "am35xx-emac.h"
 #include "mux.h"
 #include "control.h"
 
@@ -90,6 +91,7 @@ static void __init am3517_crane_init(void)
 	}
 
 	usbhs_init(&usbhs_bdata);
+	am35xx_emac_init(AM35XX_DEFAULT_MDIO_FREQUENCY, 1);
 }
 
 MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD")
@@ -100,6 +102,7 @@ MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD")
 	.init_irq	= omap3_init_irq,
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= am3517_crane_init,
+	.init_late	= am35xx_init_late,
 	.timer		= &omap3_timer,
 	.restart	= omap_prcm_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index 3645285a3e2b..18f601096ce1 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -37,7 +37,7 @@
 #include <plat/usb.h>
 #include <video/omapdss.h>
 #include <video/omap-panel-generic-dpi.h>
-#include <video/omap-panel-dvi.h>
+#include <video/omap-panel-tfp410.h>
 
 #include "am35xx-emac.h"
 #include "mux.h"
@@ -207,31 +207,14 @@ static struct omap_dss_device am3517_evm_tv_device = {
 	.platform_disable	= am3517_evm_panel_disable_tv,
 };
 
-static int am3517_evm_panel_enable_dvi(struct omap_dss_device *dssdev)
-{
-	if (lcd_enabled) {
-		printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
-		return -EINVAL;
-	}
-	dvi_enabled = 1;
-
-	return 0;
-}
-
-static void am3517_evm_panel_disable_dvi(struct omap_dss_device *dssdev)
-{
-	dvi_enabled = 0;
-}
-
-static struct panel_dvi_platform_data dvi_panel = {
-	.platform_enable	= am3517_evm_panel_enable_dvi,
-	.platform_disable	= am3517_evm_panel_disable_dvi,
+static struct tfp410_platform_data dvi_panel = {
+	.power_down_gpio	= -1,
 };
 
 static struct omap_dss_device am3517_evm_dvi_device = {
 	.type			= OMAP_DISPLAY_TYPE_DPI,
 	.name			= "dvi",
-	.driver_name		= "dvi",
+	.driver_name		= "tfp410",
 	.data			= &dvi_panel,
 	.phy.dpi.data_lines	= 24,
 };
@@ -402,6 +385,7 @@ MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM")
 	.init_irq	= omap3_init_irq,
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= am3517_evm_init,
+	.init_late	= am35xx_init_late,
 	.timer		= &omap3_timer,
 	.restart	= omap_prcm_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index 768ece2e9c3b..502c31e123be 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -356,6 +356,7 @@ MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon")
 	.init_irq	= omap2_init_irq,
 	.handle_irq	= omap2_intc_handle_irq,
 	.init_machine	= omap_apollon_init,
+	.init_late	= omap2420_init_late,
 	.timer		= &omap2_timer,
 	.restart	= omap_prcm_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index 41b0a2fe0b04..ded100c80a91 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -26,6 +26,7 @@
 
 #include <linux/i2c/at24.h>
 #include <linux/i2c/twl.h>
+#include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
 #include <linux/mmc/host.h>
 
@@ -43,7 +44,7 @@
 #include <plat/usb.h>
 #include <video/omapdss.h>
 #include <video/omap-panel-generic-dpi.h>
-#include <video/omap-panel-dvi.h>
+#include <video/omap-panel-tfp410.h>
 #include <plat/mcspi.h>
 
 #include <mach/hardware.h>
@@ -81,8 +82,23 @@ static struct omap_smsc911x_platform_data sb_t35_smsc911x_cfg = {
 	.flags		= SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
 };
 
+static struct regulator_consumer_supply cm_t35_smsc911x_supplies[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+};
+
+static struct regulator_consumer_supply sb_t35_smsc911x_supplies[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x.1"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x.1"),
+};
+
 static void __init cm_t35_init_ethernet(void)
 {
+	regulator_register_fixed(0, cm_t35_smsc911x_supplies,
+				 ARRAY_SIZE(cm_t35_smsc911x_supplies));
+	regulator_register_fixed(1, sb_t35_smsc911x_supplies,
+				 ARRAY_SIZE(sb_t35_smsc911x_supplies));
+
 	gpmc_smsc911x_init(&cm_t35_smsc911x_cfg);
 	gpmc_smsc911x_init(&sb_t35_smsc911x_cfg);
 }
@@ -202,25 +218,6 @@ static void cm_t35_panel_disable_lcd(struct omap_dss_device *dssdev)
 	gpio_set_value(CM_T35_LCD_EN_GPIO, 0);
 }
 
-static int cm_t35_panel_enable_dvi(struct omap_dss_device *dssdev)
-{
-	if (lcd_enabled) {
-		printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
-		return -EINVAL;
-	}
-
-	gpio_set_value(CM_T35_DVI_EN_GPIO, 0);
-	dvi_enabled = 1;
-
-	return 0;
-}
-
-static void cm_t35_panel_disable_dvi(struct omap_dss_device *dssdev)
-{
-	gpio_set_value(CM_T35_DVI_EN_GPIO, 1);
-	dvi_enabled = 0;
-}
-
 static int cm_t35_panel_enable_tv(struct omap_dss_device *dssdev)
 {
 	return 0;
@@ -244,15 +241,14 @@ static struct omap_dss_device cm_t35_lcd_device = {
 	.phy.dpi.data_lines	= 18,
 };
 
-static struct panel_dvi_platform_data dvi_panel = {
-	.platform_enable	= cm_t35_panel_enable_dvi,
-	.platform_disable	= cm_t35_panel_disable_dvi,
+static struct tfp410_platform_data dvi_panel = {
+	.power_down_gpio	= CM_T35_DVI_EN_GPIO,
 };
 
 static struct omap_dss_device cm_t35_dvi_device = {
 	.name			= "dvi",
 	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.driver_name		= "dvi",
+	.driver_name		= "tfp410",
 	.data			= &dvi_panel,
 	.phy.dpi.data_lines	= 24,
 };
@@ -300,7 +296,6 @@ static struct spi_board_info cm_t35_lcd_spi_board_info[] __initdata = {
 static struct gpio cm_t35_dss_gpios[] __initdata = {
 	{ CM_T35_LCD_EN_GPIO, GPIOF_OUT_INIT_LOW,  "lcd enable"    },
 	{ CM_T35_LCD_BL_GPIO, GPIOF_OUT_INIT_LOW,  "lcd bl enable" },
-	{ CM_T35_DVI_EN_GPIO, GPIOF_OUT_INIT_HIGH, "dvi enable"    },
 };
 
 static void __init cm_t35_init_display(void)
@@ -319,7 +314,6 @@ static void __init cm_t35_init_display(void)
 
 	gpio_export(CM_T35_LCD_EN_GPIO, 0);
 	gpio_export(CM_T35_LCD_BL_GPIO, 0);
-	gpio_export(CM_T35_DVI_EN_GPIO, 0);
 
 	msleep(50);
 	gpio_set_value(CM_T35_LCD_EN_GPIO, 1);
@@ -482,6 +476,10 @@ static struct twl4030_gpio_platform_data cm_t35_gpio_data = {
 	.setup          = cm_t35_twl_gpio_setup,
 };
 
+static struct twl4030_power_data cm_t35_power_data = {
+	.use_poweroff	= true,
+};
+
 static struct twl4030_platform_data cm_t35_twldata = {
 	/* platform_data for children goes here */
 	.keypad		= &cm_t35_kp_data,
@@ -489,6 +487,7 @@ static struct twl4030_platform_data cm_t35_twldata = {
 	.vmmc1		= &cm_t35_vmmc1,
 	.vsim		= &cm_t35_vsim,
 	.vio		= &cm_t35_vio,
+	.power		= &cm_t35_power_data,
 };
 
 static void __init cm_t35_init_i2c(void)
@@ -670,6 +669,7 @@ MACHINE_START(CM_T35, "Compulab CM-T35")
 	.init_irq	= omap3_init_irq,
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= cm_t35_init,
+	.init_late	= omap35xx_init_late,
 	.timer		= &omap3_timer,
 	.restart	= omap_prcm_restart,
 MACHINE_END
@@ -682,6 +682,7 @@ MACHINE_START(CM_T3730, "Compulab CM-T3730")
 	.init_irq       = omap3_init_irq,
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine   = cm_t3730_init,
+	.init_late     = omap3630_init_late,
 	.timer          = &omap3_timer,
 	.restart	= omap_prcm_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c
index 9e66e167e4f3..a33ad4641d9a 100644
--- a/arch/arm/mach-omap2/board-cm-t3517.c
+++ b/arch/arm/mach-omap2/board-cm-t3517.c
@@ -303,6 +303,7 @@ MACHINE_START(CM_T3517, "Compulab CM-T3517")
 	.init_irq	= omap3_init_irq,
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= cm_t3517_init,
+	.init_late	= am35xx_init_late,
 	.timer		= &omap3_timer,
 	.restart	= omap_prcm_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index a2010f07de31..6567c1cd5572 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -47,7 +47,7 @@
 #include <plat/usb.h>
 #include <video/omapdss.h>
 #include <video/omap-panel-generic-dpi.h>
-#include <video/omap-panel-dvi.h>
+#include <video/omap-panel-tfp410.h>
 
 #include <plat/mcspi.h>
 #include <linux/input/matrix_keypad.h>
@@ -118,19 +118,6 @@ static void devkit8000_panel_disable_lcd(struct omap_dss_device *dssdev)
 		gpio_set_value_cansleep(dssdev->reset_gpio, 0);
 }
 
-static int devkit8000_panel_enable_dvi(struct omap_dss_device *dssdev)
-{
-	if (gpio_is_valid(dssdev->reset_gpio))
-		gpio_set_value_cansleep(dssdev->reset_gpio, 1);
-	return 0;
-}
-
-static void devkit8000_panel_disable_dvi(struct omap_dss_device *dssdev)
-{
-	if (gpio_is_valid(dssdev->reset_gpio))
-		gpio_set_value_cansleep(dssdev->reset_gpio, 0);
-}
-
 static struct regulator_consumer_supply devkit8000_vmmc1_supply[] = {
 	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
 };
@@ -154,15 +141,14 @@ static struct omap_dss_device devkit8000_lcd_device = {
 	.phy.dpi.data_lines     = 24,
 };
 
-static struct panel_dvi_platform_data dvi_panel = {
-	.platform_enable        = devkit8000_panel_enable_dvi,
-	.platform_disable       = devkit8000_panel_disable_dvi,
+static struct tfp410_platform_data dvi_panel = {
+	.power_down_gpio	= -1,
 };
 
 static struct omap_dss_device devkit8000_dvi_device = {
 	.name                   = "dvi",
 	.type                   = OMAP_DISPLAY_TYPE_DPI,
-	.driver_name            = "dvi",
+	.driver_name            = "tfp410",
 	.data			= &dvi_panel,
 	.phy.dpi.data_lines     = 24,
 };
@@ -244,13 +230,7 @@ static int devkit8000_twl_gpio_setup(struct device *dev,
 	}
 
 	/* gpio + 7 is "DVI_PD" (out, active low) */
-	devkit8000_dvi_device.reset_gpio = gpio + 7;
-	ret = gpio_request_one(devkit8000_dvi_device.reset_gpio,
-			       GPIOF_OUT_INIT_LOW, "DVI PowerDown");
-	if (ret < 0) {
-		devkit8000_dvi_device.reset_gpio = -EINVAL;
-		printk(KERN_ERR "Failed to request GPIO for DVI PowerDown\n");
-	}
+	dvi_panel.power_down_gpio = gpio + 7;
 
 	return 0;
 }
@@ -664,6 +644,7 @@ MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000")
 	.init_irq	= omap3_init_irq,
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= devkit8000_init,
+	.init_late	= omap35xx_init_late,
 	.timer		= &omap3_secure_timer,
 	.restart	= omap_prcm_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c
index 0349fd2b68d8..70a81f900bb5 100644
--- a/arch/arm/mach-omap2/board-flash.c
+++ b/arch/arm/mach-omap2/board-flash.c
@@ -87,7 +87,7 @@ static struct omap_onenand_platform_data board_onenand_data = {
 	.dma_channel	= -1,   /* disable DMA in OMAP OneNAND driver */
 };
 
-static void
+void
 __init board_onenand_init(struct mtd_partition *onenand_parts,
 				u8 nr_parts, u8 cs)
 {
@@ -98,7 +98,7 @@ __init board_onenand_init(struct mtd_partition *onenand_parts,
 	gpmc_onenand_init(&board_onenand_data);
 }
 #else
-static void
+void
 __init board_onenand_init(struct mtd_partition *nor_parts, u8 nr_parts, u8 cs)
 {
 }
diff --git a/arch/arm/mach-omap2/board-flash.h b/arch/arm/mach-omap2/board-flash.h
index d25503a98417..c44b70d52021 100644
--- a/arch/arm/mach-omap2/board-flash.h
+++ b/arch/arm/mach-omap2/board-flash.h
@@ -47,3 +47,14 @@ static inline void board_nand_init(struct mtd_partition *nand_parts,
 {
 }
 #endif
+
+#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
+		defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+extern void board_onenand_init(struct mtd_partition *nand_parts,
+					u8 nr_parts, u8 cs);
+#else
+static inline void board_onenand_init(struct mtd_partition *nand_parts,
+					u8 nr_parts, u8 cs)
+{
+}
+#endif
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 74e1687b5170..202934657867 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -15,7 +15,6 @@
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/irqdomain.h>
-#include <linux/i2c/twl.h>
 
 #include <mach/hardware.h>
 #include <asm/hardware/gic.h>
@@ -95,22 +94,6 @@ MACHINE_END
 #endif
 
 #ifdef CONFIG_ARCH_OMAP3
-static struct twl4030_platform_data beagle_twldata = {
-	.irq_base	= TWL4030_IRQ_BASE,
-	.irq_end	= TWL4030_IRQ_END,
-};
-
-static void __init omap3_i2c_init(void)
-{
-	omap3_pmic_init("twl4030", &beagle_twldata);
-}
-
-static void __init omap3_init(void)
-{
-	omap3_i2c_init();
-	omap_generic_init();
-}
-
 static const char *omap3_boards_compat[] __initdata = {
 	"ti,omap3",
 	NULL,
@@ -122,7 +105,7 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)")
 	.init_early	= omap3430_init_early,
 	.init_irq	= omap_init_irq,
 	.handle_irq	= omap3_intc_handle_irq,
-	.init_machine	= omap3_init,
+	.init_machine	= omap_generic_init,
 	.timer		= &omap3_timer,
 	.dt_compat	= omap3_boards_compat,
 	.restart	= omap_prcm_restart,
@@ -130,22 +113,6 @@ MACHINE_END
 #endif
 
 #ifdef CONFIG_ARCH_OMAP4
-static struct twl4030_platform_data sdp4430_twldata = {
-	.irq_base	= TWL6030_IRQ_BASE,
-	.irq_end	= TWL6030_IRQ_END,
-};
-
-static void __init omap4_i2c_init(void)
-{
-	omap4_pmic_init("twl6030", &sdp4430_twldata);
-}
-
-static void __init omap4_init(void)
-{
-	omap4_i2c_init();
-	omap_generic_init();
-}
-
 static const char *omap4_boards_compat[] __initdata = {
 	"ti,omap4",
 	NULL,
@@ -157,7 +124,8 @@ DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)")
 	.init_early	= omap4430_init_early,
 	.init_irq	= omap_init_irq,
 	.handle_irq	= gic_handle_irq,
-	.init_machine	= omap4_init,
+	.init_machine	= omap_generic_init,
+	.init_late	= omap4430_init_late,
 	.timer		= &omap4_timer,
 	.dt_compat	= omap4_boards_compat,
 	.restart	= omap_prcm_restart,
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 0bbbabe28fcc..876becf8205a 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -398,6 +398,7 @@ MACHINE_START(OMAP_H4, "OMAP2420 H4 board")
 	.init_irq	= omap2_init_irq,
 	.handle_irq	= omap2_intc_handle_irq,
 	.init_machine	= omap_h4_init,
+	.init_late	= omap2420_init_late,
 	.timer		= &omap2_timer,
 	.restart	= omap_prcm_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index e558800adfdf..74915295482e 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -24,6 +24,8 @@
 #include <linux/i2c/twl.h>
 #include <linux/mmc/host.h>
 
+#include <linux/mtd/nand.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -32,13 +34,15 @@
 #include <plat/gpmc.h>
 #include <plat/usb.h>
 #include <video/omapdss.h>
-#include <video/omap-panel-dvi.h>
+#include <video/omap-panel-tfp410.h>
 #include <plat/onenand.h>
 
 #include "mux.h"
 #include "hsmmc.h"
 #include "sdram-numonyx-m65kxxxxam.h"
 #include "common-board-devices.h"
+#include "board-flash.h"
+#include "control.h"
 
 #define IGEP2_SMSC911X_CS       5
 #define IGEP2_SMSC911X_GPIO     176
@@ -60,6 +64,10 @@
 #define IGEP3_GPIO_LED1_RED	16
 #define IGEP3_GPIO_USBH_NRESET  183
 
+#define IGEP_SYSBOOT_MASK           0x1f
+#define IGEP_SYSBOOT_NAND           0x0f
+#define IGEP_SYSBOOT_ONENAND        0x10
+
 /*
  * IGEP2 Hardware Revision Table
  *
@@ -110,8 +118,10 @@ static void __init igep2_get_revision(void)
 	gpio_free(IGEP2_GPIO_LED1_RED);
 }
 
-#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
-	defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+#if defined(CONFIG_MTD_ONENAND_OMAP2) ||		\
+	defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) ||	\
+	defined(CONFIG_MTD_NAND_OMAP2) ||		\
+	defined(CONFIG_MTD_NAND_OMAP2_MODULE)
 
 #define ONENAND_MAP             0x20000000
 
@@ -123,7 +133,7 @@ static void __init igep2_get_revision(void)
  * So MTD regards it as 4KiB page size and 256KiB block size 64*(2*2048)
  */
 
-static struct mtd_partition igep_onenand_partitions[] = {
+static struct mtd_partition igep_flash_partitions[] = {
 	{
 		.name           = "X-Loader",
 		.offset         = 0,
@@ -151,50 +161,28 @@ static struct mtd_partition igep_onenand_partitions[] = {
 	},
 };
 
-static struct omap_onenand_platform_data igep_onenand_data = {
-	.parts = igep_onenand_partitions,
-	.nr_parts = ARRAY_SIZE(igep_onenand_partitions),
-	.dma_channel	= -1,	/* disable DMA in OMAP OneNAND driver */
-};
-
-static struct platform_device igep_onenand_device = {
-	.name		= "omap2-onenand",
-	.id		= -1,
-	.dev = {
-		.platform_data = &igep_onenand_data,
-	},
-};
+static inline u32 igep_get_sysboot_value(void)
+{
+	return omap_ctrl_readl(OMAP343X_CONTROL_STATUS) & IGEP_SYSBOOT_MASK;
+}
 
 static void __init igep_flash_init(void)
 {
-	u8 cs = 0;
-	u8 onenandcs = GPMC_CS_NUM + 1;
-
-	for (cs = 0; cs < GPMC_CS_NUM; cs++) {
-		u32 ret;
-		ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
-
-		/* Check if NAND/oneNAND is configured */
-		if ((ret & 0xC00) == 0x800)
-			/* NAND found */
-			pr_err("IGEP: Unsupported NAND found\n");
-		else {
-			ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);
-			if ((ret & 0x3F) == (ONENAND_MAP >> 24))
-				/* ONENAND found */
-				onenandcs = cs;
-		}
-	}
-
-	if (onenandcs > GPMC_CS_NUM) {
-		pr_err("IGEP: Unable to find configuration in GPMC\n");
-		return;
+	u32 mux;
+	mux = igep_get_sysboot_value();
+
+	if (mux == IGEP_SYSBOOT_NAND) {
+		pr_info("IGEP: initializing NAND memory device\n");
+		board_nand_init(igep_flash_partitions,
+				ARRAY_SIZE(igep_flash_partitions),
+				0, NAND_BUSWIDTH_16);
+	} else if (mux == IGEP_SYSBOOT_ONENAND) {
+		pr_info("IGEP: initializing OneNAND memory device\n");
+		board_onenand_init(igep_flash_partitions,
+				   ARRAY_SIZE(igep_flash_partitions), 0);
+	} else {
+		pr_err("IGEP: Flash: unsupported sysboot sequence found\n");
 	}
-
-	igep_onenand_data.cs = onenandcs;
-
-	if (platform_device_register(&igep_onenand_device) < 0)
-		pr_err("IGEP: Unable to register OneNAND device\n");
 }
 
 #else
@@ -444,28 +432,15 @@ static struct twl4030_gpio_platform_data igep_twl4030_gpio_pdata = {
 	.setup		= igep_twl_gpio_setup,
 };
 
-static int igep2_enable_dvi(struct omap_dss_device *dssdev)
-{
-	gpio_direction_output(IGEP2_GPIO_DVI_PUP, 1);
-
-	return 0;
-}
-
-static void igep2_disable_dvi(struct omap_dss_device *dssdev)
-{
-	gpio_direction_output(IGEP2_GPIO_DVI_PUP, 0);
-}
-
-static struct panel_dvi_platform_data dvi_panel = {
-	.platform_enable	= igep2_enable_dvi,
-	.platform_disable	= igep2_disable_dvi,
-	.i2c_bus_num = 3,
+static struct tfp410_platform_data dvi_panel = {
+	.i2c_bus_num		= 3,
+	.power_down_gpio	= IGEP2_GPIO_DVI_PUP,
 };
 
 static struct omap_dss_device igep2_dvi_device = {
 	.type			= OMAP_DISPLAY_TYPE_DPI,
 	.name			= "dvi",
-	.driver_name		= "dvi",
+	.driver_name		= "tfp410",
 	.data			= &dvi_panel,
 	.phy.dpi.data_lines	= 24,
 };
@@ -480,14 +455,6 @@ static struct omap_dss_board_info igep2_dss_data = {
 	.default_device	= &igep2_dvi_device,
 };
 
-static void __init igep2_display_init(void)
-{
-	int err = gpio_request_one(IGEP2_GPIO_DVI_PUP, GPIOF_OUT_INIT_HIGH,
-				   "GPIO_DVI_PUP");
-	if (err)
-		pr_err("IGEP v2: Could not obtain gpio GPIO_DVI_PUP\n");
-}
-
 static struct platform_device *igep_devices[] __initdata = {
 	&igep_vwlan_device,
 };
@@ -540,7 +507,10 @@ static void __init igep_i2c_init(void)
 {
 	int ret;
 
-	omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_USB, 0);
+	omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_USB,
+			      TWL_COMMON_REGULATOR_VPLL2);
+	igep_twldata.vpll2->constraints.apply_uV = true;
+	igep_twldata.vpll2->constraints.name = "VDVI";
 
 	if (machine_is_igep0020()) {
 		/*
@@ -554,10 +524,7 @@ static void __init igep_i2c_init(void)
 
 		igep_twldata.keypad	= &igep2_keypad_pdata;
 		/* Get common pmic data */
-		omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_AUDIO,
-				      TWL_COMMON_REGULATOR_VPLL2);
-		igep_twldata.vpll2->constraints.apply_uV = true;
-		igep_twldata.vpll2->constraints.name = "VDVI";
+		omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_AUDIO, 0);
 	}
 
 	omap3_pmic_init("twl4030", &igep_twldata);
@@ -634,8 +601,14 @@ static void __init igep_wlan_bt_init(void)
 static inline void __init igep_wlan_bt_init(void) { }
 #endif
 
+static struct regulator_consumer_supply dummy_supplies[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+};
+
 static void __init igep_init(void)
 {
+	regulator_register_fixed(1, dummy_supplies, ARRAY_SIZE(dummy_supplies));
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 
 	/* Get IGEP2 hardware revision */
@@ -662,7 +635,6 @@ static void __init igep_init(void)
 
 	if (machine_is_igep0020()) {
 		omap_display_init(&igep2_dss_data);
-		igep2_display_init();
 		igep2_init_smsc911x();
 		usbhs_init(&igep2_usbhs_bdata);
 	} else {
@@ -678,6 +650,7 @@ MACHINE_START(IGEP0020, "IGEP v2 board")
 	.init_irq	= omap3_init_irq,
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= igep_init,
+	.init_late	= omap35xx_init_late,
 	.timer		= &omap3_timer,
 	.restart	= omap_prcm_restart,
 MACHINE_END
@@ -690,6 +663,7 @@ MACHINE_START(IGEP0030, "IGEP OMAP3 module")
 	.init_irq	= omap3_init_irq,
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= igep_init,
+	.init_late	= omap35xx_init_late,
 	.timer		= &omap3_timer,
 	.restart	= omap_prcm_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index d50a562adfa0..ef9e82977499 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -22,6 +22,7 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/spi/spi.h>
+#include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
 #include <linux/i2c/twl.h>
 #include <linux/io.h>
@@ -410,8 +411,14 @@ static struct mtd_partition ldp_nand_partitions[] = {
 
 };
 
+static struct regulator_consumer_supply dummy_supplies[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+};
+
 static void __init omap_ldp_init(void)
 {
+	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	ldp_init_smsc911x();
 	omap_i2c_init();
@@ -435,6 +442,7 @@ MACHINE_START(OMAP_LDP, "OMAP LDP board")
 	.init_irq	= omap3_init_irq,
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap_ldp_init,
+	.init_late	= omap3430_init_late,
 	.timer		= &omap3_timer,
 	.restart	= omap_prcm_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index 518091c5f77c..8ca14e88a31a 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -694,6 +694,7 @@ MACHINE_START(NOKIA_N800, "Nokia N800")
 	.init_irq	= omap2_init_irq,
 	.handle_irq	= omap2_intc_handle_irq,
 	.init_machine	= n8x0_init_machine,
+	.init_late	= omap2420_init_late,
 	.timer		= &omap2_timer,
 	.restart	= omap_prcm_restart,
 MACHINE_END
@@ -706,6 +707,7 @@ MACHINE_START(NOKIA_N810, "Nokia N810")
 	.init_irq	= omap2_init_irq,
 	.handle_irq	= omap2_intc_handle_irq,
 	.init_machine	= n8x0_init_machine,
+	.init_late	= omap2420_init_late,
 	.timer		= &omap2_timer,
 	.restart	= omap_prcm_restart,
 MACHINE_END
@@ -718,6 +720,7 @@ MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
 	.init_irq	= omap2_init_irq,
 	.handle_irq	= omap2_intc_handle_irq,
 	.init_machine	= n8x0_init_machine,
+	.init_late	= omap2420_init_late,
 	.timer		= &omap2_timer,
 	.restart	= omap_prcm_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 7be8d659d91d..79c6909eeb78 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -42,7 +42,7 @@
 #include <plat/board.h>
 #include "common.h"
 #include <video/omapdss.h>
-#include <video/omap-panel-dvi.h>
+#include <video/omap-panel-tfp410.h>
 #include <plat/gpmc.h>
 #include <plat/nand.h>
 #include <plat/usb.h>
@@ -83,11 +83,13 @@ static struct {
 	int usb_pwr_level;
 	int reset_gpio;
 	int usr_button_gpio;
+	int mmc_caps;
 } beagle_config = {
 	.mmc1_gpio_wp = -EINVAL,
 	.usb_pwr_level = GPIOF_OUT_INIT_LOW,
 	.reset_gpio = 129,
 	.usr_button_gpio = 4,
+	.mmc_caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
 };
 
 static struct gpio omap3_beagle_rev_gpios[] __initdata = {
@@ -145,10 +147,12 @@ static void __init omap3_beagle_init_rev(void)
 		printk(KERN_INFO "OMAP3 Beagle Rev: xM Ax/Bx\n");
 		omap3_beagle_version = OMAP3BEAGLE_BOARD_XM;
 		beagle_config.usb_pwr_level = GPIOF_OUT_INIT_HIGH;
+		beagle_config.mmc_caps &= ~MMC_CAP_8_BIT_DATA;
 		break;
 	case 2:
 		printk(KERN_INFO "OMAP3 Beagle Rev: xM C\n");
 		omap3_beagle_version = OMAP3BEAGLE_BOARD_XMC;
+		beagle_config.mmc_caps &= ~MMC_CAP_8_BIT_DATA;
 		break;
 	default:
 		printk(KERN_INFO "OMAP3 Beagle Rev: unknown %hd\n", beagle_rev);
@@ -189,33 +193,17 @@ static struct mtd_partition omap3beagle_nand_partitions[] = {
 
 /* DSS */
 
-static int beagle_enable_dvi(struct omap_dss_device *dssdev)
-{
-	if (gpio_is_valid(dssdev->reset_gpio))
-		gpio_set_value(dssdev->reset_gpio, 1);
-
-	return 0;
-}
-
-static void beagle_disable_dvi(struct omap_dss_device *dssdev)
-{
-	if (gpio_is_valid(dssdev->reset_gpio))
-		gpio_set_value(dssdev->reset_gpio, 0);
-}
-
-static struct panel_dvi_platform_data dvi_panel = {
-	.platform_enable = beagle_enable_dvi,
-	.platform_disable = beagle_disable_dvi,
+static struct tfp410_platform_data dvi_panel = {
 	.i2c_bus_num = 3,
+	.power_down_gpio = -1,
 };
 
 static struct omap_dss_device beagle_dvi_device = {
 	.type = OMAP_DISPLAY_TYPE_DPI,
 	.name = "dvi",
-	.driver_name = "dvi",
+	.driver_name = "tfp410",
 	.data = &dvi_panel,
 	.phy.dpi.data_lines = 24,
-	.reset_gpio = -EINVAL,
 };
 
 static struct omap_dss_device beagle_tv_device = {
@@ -236,22 +224,12 @@ static struct omap_dss_board_info beagle_dss_data = {
 	.default_device = &beagle_dvi_device,
 };
 
-static void __init beagle_display_init(void)
-{
-	int r;
-
-	r = gpio_request_one(beagle_dvi_device.reset_gpio, GPIOF_OUT_INIT_LOW,
-			     "DVI reset");
-	if (r < 0)
-		printk(KERN_ERR "Unable to get DVI reset GPIO\n");
-}
-
 #include "sdram-micron-mt46h32m32lf-6.h"
 
 static struct omap2_hsmmc_info mmc[] = {
 	{
 		.mmc		= 1,
-		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
+		.caps		= MMC_CAP_4_BIT_DATA,
 		.gpio_wp	= -EINVAL,
 		.deferred	= true,
 	},
@@ -309,7 +287,7 @@ static int beagle_twl_gpio_setup(struct device *dev,
 		if (gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC"))
 			pr_err("%s: unable to configure EHCI_nOC\n", __func__);
 	}
-	beagle_dvi_device.reset_gpio = beagle_config.reset_gpio;
+	dvi_panel.power_down_gpio = beagle_config.reset_gpio;
 
 	gpio_request_one(gpio + TWL4030_GPIO_MAX, beagle_config.usb_pwr_level,
 			"nEN_USB_PWR");
@@ -523,6 +501,7 @@ static void __init omap3_beagle_init(void)
 
 	if (beagle_config.mmc1_gpio_wp != -EINVAL)
 		omap_mux_init_gpio(beagle_config.mmc1_gpio_wp, OMAP_PIN_INPUT);
+	mmc[0].caps = beagle_config.mmc_caps;
 	omap_hsmmc_init(mmc);
 
 	omap3_beagle_i2c_init();
@@ -552,7 +531,6 @@ static void __init omap3_beagle_init(void)
 	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
 	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
 
-	beagle_display_init();
 	beagle_opp_init();
 }
 
@@ -565,6 +543,7 @@ MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
 	.init_irq	= omap3_init_irq,
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap3_beagle_init,
+	.init_late	= omap3_init_late,
 	.timer		= &omap3_secure_timer,
 	.restart	= omap_prcm_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 4c90f078abe1..639bd07ea38a 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -46,7 +46,7 @@
 #include "common.h"
 #include <plat/mcspi.h>
 #include <video/omapdss.h>
-#include <video/omap-panel-dvi.h>
+#include <video/omap-panel-tfp410.h>
 
 #include "mux.h"
 #include "sdram-micron-mt46h32m32lf-6.h"
@@ -114,15 +114,6 @@ static struct omap_smsc911x_platform_data smsc911x_cfg = {
 
 static inline void __init omap3evm_init_smsc911x(void)
 {
-	struct clk *l3ck;
-	unsigned int rate;
-
-	l3ck = clk_get(NULL, "l3_ck");
-	if (IS_ERR(l3ck))
-		rate = 100000000;
-	else
-		rate = clk_get_rate(l3ck);
-
 	/* Configure ethernet controller reset gpio */
 	if (cpu_is_omap3430()) {
 		if (get_omap3_evm_rev() == OMAP3EVM_BOARD_GEN_1)
@@ -228,35 +219,14 @@ static struct omap_dss_device omap3_evm_tv_device = {
 	.platform_disable	= omap3_evm_disable_tv,
 };
 
-static int omap3_evm_enable_dvi(struct omap_dss_device *dssdev)
-{
-	if (lcd_enabled) {
-		printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
-		return -EINVAL;
-	}
-
-	gpio_set_value_cansleep(OMAP3EVM_DVI_PANEL_EN_GPIO, 1);
-
-	dvi_enabled = 1;
-	return 0;
-}
-
-static void omap3_evm_disable_dvi(struct omap_dss_device *dssdev)
-{
-	gpio_set_value_cansleep(OMAP3EVM_DVI_PANEL_EN_GPIO, 0);
-
-	dvi_enabled = 0;
-}
-
-static struct panel_dvi_platform_data dvi_panel = {
-	.platform_enable	= omap3_evm_enable_dvi,
-	.platform_disable	= omap3_evm_disable_dvi,
+static struct tfp410_platform_data dvi_panel = {
+	.power_down_gpio	= OMAP3EVM_DVI_PANEL_EN_GPIO,
 };
 
 static struct omap_dss_device omap3_evm_dvi_device = {
 	.name			= "dvi",
 	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.driver_name		= "dvi",
+	.driver_name		= "tfp410",
 	.data			= &dvi_panel,
 	.phy.dpi.data_lines	= 24,
 };
@@ -632,14 +602,20 @@ static void __init omap3_evm_wl12xx_init(void)
 #endif
 }
 
+static struct regulator_consumer_supply dummy_supplies[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+};
+
 static void __init omap3_evm_init(void)
 {
+	struct omap_board_mux *obm;
+
 	omap3_evm_get_revision();
+	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
 
-	if (cpu_is_omap3630())
-		omap3_mux_init(omap36x_board_mux, OMAP_PACKAGE_CBB);
-	else
-		omap3_mux_init(omap35x_board_mux, OMAP_PACKAGE_CBB);
+	obm = (cpu_is_omap3630()) ? omap36x_board_mux : omap35x_board_mux;
+	omap3_mux_init(obm, OMAP_PACKAGE_CBB);
 
 	omap_board_config = omap3_evm_config;
 	omap_board_config_size = ARRAY_SIZE(omap3_evm_config);
@@ -695,6 +671,7 @@ MACHINE_START(OMAP3EVM, "OMAP3 EVM")
 	.init_irq	= omap3_init_irq,
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap3_evm_init,
+	.init_late	= omap35xx_init_late,
 	.timer		= &omap3_timer,
 	.restart	= omap_prcm_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c
index 4a7d8c8a75da..932e1778aff9 100644
--- a/arch/arm/mach-omap2/board-omap3logic.c
+++ b/arch/arm/mach-omap2/board-omap3logic.c
@@ -4,8 +4,9 @@
  * Copyright (C) 2010 Li-Pro.Net
  * Stephan Linz <linz@li-pro.net>
  *
- * Copyright (C) 2010 Logic Product Development, Inc.
+ * Copyright (C) 2010-2012 Logic Product Development, Inc.
  * Peter Barada <peter.barada@logicpd.com>
+ * Ashwin BIhari <ashwin.bihari@logicpd.com>
  *
  * Modified from Beagle, EVM, and RX51
  *
@@ -23,6 +24,7 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 
+#include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
 
 #include <linux/i2c/twl.h>
@@ -44,6 +46,7 @@
 #include <plat/gpmc-smsc911x.h>
 #include <plat/gpmc.h>
 #include <plat/sdrc.h>
+#include <plat/usb.h>
 
 #define OMAP3LOGIC_SMSC911X_CS			1
 
@@ -84,6 +87,11 @@ static struct twl4030_gpio_platform_data omap3logic_gpio_data = {
 			| BIT(13) | BIT(15) | BIT(16) | BIT(17),
 };
 
+static struct twl4030_usb_data omap3logic_usb_data = {
+	.usb_mode	= T2_USB_MODE_ULPI,
+};
+
+
 static struct twl4030_platform_data omap3logic_twldata = {
 	.irq_base	= TWL4030_IRQ_BASE,
 	.irq_end	= TWL4030_IRQ_END,
@@ -91,6 +99,7 @@ static struct twl4030_platform_data omap3logic_twldata = {
 	/* platform_data for children goes here */
 	.gpio		= &omap3logic_gpio_data,
 	.vmmc1		= &omap3logic_vmmc1,
+	.usb		= &omap3logic_usb_data,
 };
 
 static int __init omap3logic_i2c_init(void)
@@ -184,12 +193,32 @@ static inline void __init board_smsc911x_init(void)
 
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
+	/* mUSB */
+	OMAP3_MUX(HSUSB0_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_STP, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(HSUSB0_DIR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_NXT, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
 #endif
 
+static struct regulator_consumer_supply dummy_supplies[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+};
+
 static void __init omap3logic_init(void)
 {
+	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	omap3torpedo_fix_pbias_voltage();
 	omap3logic_i2c_init();
@@ -198,6 +227,8 @@ static void __init omap3logic_init(void)
 	board_mmc_init();
 	board_smsc911x_init();
 
+	usb_musb_init(NULL);
+
 	/* Ensure SDRC pins are mux'd for self-refresh */
 	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
 	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
@@ -211,6 +242,7 @@ MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board")
 	.init_irq	= omap3_init_irq,
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap3logic_init,
+	.init_late	= omap35xx_init_late,
 	.timer		= &omap3_timer,
 	.restart	= omap_prcm_restart,
 MACHINE_END
@@ -223,6 +255,7 @@ MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board")
 	.init_irq	= omap3_init_irq,
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap3logic_init,
+	.init_late	= omap35xx_init_late,
 	.timer		= &omap3_timer,
 	.restart	= omap_prcm_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 33d995d0f075..57aebee44fd0 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -622,6 +622,7 @@ MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console")
 	.init_irq	= omap3_init_irq,
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap3pandora_init,
+	.init_late	= omap35xx_init_late,
 	.timer		= &omap3_timer,
 	.restart	= omap_prcm_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index 641004380795..b318f5602e36 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -24,6 +24,7 @@
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
 
+#include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
 #include <linux/i2c/twl.h>
 #include <linux/mmc/host.h>
@@ -41,7 +42,7 @@
 #include <plat/usb.h>
 #include <video/omapdss.h>
 #include <video/omap-panel-generic-dpi.h>
-#include <video/omap-panel-dvi.h>
+#include <video/omap-panel-tfp410.h>
 
 #include <plat/mcspi.h>
 #include <linux/input/matrix_keypad.h>
@@ -72,15 +73,6 @@ static struct omap_smsc911x_platform_data smsc911x_cfg = {
 
 static inline void __init omap3stalker_init_eth(void)
 {
-	struct clk *l3ck;
-	unsigned int rate;
-
-	l3ck = clk_get(NULL, "l3_ck");
-	if (IS_ERR(l3ck))
-		rate = 100000000;
-	else
-		rate = clk_get_rate(l3ck);
-
 	omap_mux_init_gpio(19, OMAP_PIN_INPUT_PULLUP);
 	gpmc_smsc911x_init(&smsc911x_cfg);
 }
@@ -100,9 +92,6 @@ static inline void __init omap3stalker_init_eth(void)
 #define LCD_PANEL_BKLIGHT_GPIO	210
 #define ENABLE_VPLL2_DEV_GRP	0xE0
 
-static int lcd_enabled;
-static int dvi_enabled;
-
 static void __init omap3_stalker_display_init(void)
 {
 	return;
@@ -130,32 +119,14 @@ static struct omap_dss_device omap3_stalker_tv_device = {
 	.platform_disable	= omap3_stalker_disable_tv,
 };
 
-static int omap3_stalker_enable_dvi(struct omap_dss_device *dssdev)
-{
-	if (lcd_enabled) {
-		printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
-		return -EINVAL;
-	}
-	gpio_set_value(DSS_ENABLE_GPIO, 1);
-	dvi_enabled = 1;
-	return 0;
-}
-
-static void omap3_stalker_disable_dvi(struct omap_dss_device *dssdev)
-{
-	gpio_set_value(DSS_ENABLE_GPIO, 0);
-	dvi_enabled = 0;
-}
-
-static struct panel_dvi_platform_data dvi_panel = {
-	.platform_enable	= omap3_stalker_enable_dvi,
-	.platform_disable	= omap3_stalker_disable_dvi,
+static struct tfp410_platform_data dvi_panel = {
+	.power_down_gpio	= DSS_ENABLE_GPIO,
 };
 
 static struct omap_dss_device omap3_stalker_dvi_device = {
 	.name			= "dvi",
 	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.driver_name		= "dvi",
+	.driver_name		= "tfp410",
 	.data			= &dvi_panel,
 	.phy.dpi.data_lines	= 24,
 };
@@ -419,8 +390,14 @@ static struct omap_board_mux board_mux[] __initdata = {
 };
 #endif
 
+static struct regulator_consumer_supply dummy_supplies[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+};
+
 static void __init omap3_stalker_init(void)
 {
+	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
 	omap_board_config = omap3_stalker_config;
 	omap_board_config_size = ARRAY_SIZE(omap3_stalker_config);
@@ -459,6 +436,7 @@ MACHINE_START(SBC3530, "OMAP3 STALKER")
 	.init_irq		= omap3_init_irq,
 	.handle_irq		= omap3_intc_handle_irq,
 	.init_machine		= omap3_stalker_init,
+	.init_late		= omap35xx_init_late,
 	.timer			= &omap3_secure_timer,
 	.restart		= omap_prcm_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index ae2251fa4a69..485d14d6a8cd 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -387,6 +387,7 @@ MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board")
 	.init_irq	= omap3_init_irq,
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap3_touchbook_init,
+	.init_late	= omap3430_init_late,
 	.timer		= &omap3_secure_timer,
 	.restart	= omap_prcm_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index d8c0e89f0126..982fb2622ab8 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -25,8 +25,10 @@
 #include <linux/gpio.h>
 #include <linux/usb/otg.h>
 #include <linux/i2c/twl.h>
+#include <linux/mfd/twl6040.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/fixed.h>
+#include <linux/ti_wilink_st.h>
 #include <linux/wl12xx.h>
 #include <linux/platform_data/omap-abe-twl6040.h>
 
@@ -41,7 +43,7 @@
 #include "common.h"
 #include <plat/usb.h>
 #include <plat/mmc.h>
-#include <video/omap-panel-dvi.h>
+#include <video/omap-panel-tfp410.h>
 
 #include "hsmmc.h"
 #include "control.h"
@@ -57,12 +59,21 @@
 #define HDMI_GPIO_HPD  63 /* Hotplug detect */
 
 /* wl127x BT, FM, GPS connectivity chip */
-static int wl1271_gpios[] = {46, -1, -1};
+static struct ti_st_plat_data wilink_platform_data = {
+	.nshutdown_gpio	= 46,
+	.dev_name	= "/dev/ttyO1",
+	.flow_cntrl	= 1,
+	.baud_rate	= 3000000,
+	.chip_enable	= NULL,
+	.suspend	= NULL,
+	.resume		= NULL,
+};
+
 static struct platform_device wl1271_device = {
 	.name	= "kim",
 	.id	= -1,
 	.dev	= {
-		.platform_data	= &wl1271_gpios,
+		.platform_data	= &wilink_platform_data,
 	},
 };
 
@@ -116,6 +127,11 @@ static struct platform_device panda_abe_audio = {
 	},
 };
 
+static struct platform_device panda_hdmi_audio_codec = {
+	.name	= "hdmi-audio-codec",
+	.id	= -1,
+};
+
 static struct platform_device btwilink_device = {
 	.name	= "btwilink",
 	.id	= -1,
@@ -125,6 +141,7 @@ static struct platform_device *panda_devices[] __initdata = {
 	&leds_gpio,
 	&wl1271_device,
 	&panda_abe_audio,
+	&panda_hdmi_audio_codec,
 	&btwilink_device,
 };
 
@@ -230,61 +247,12 @@ static struct platform_device omap_vwlan_device = {
 	},
 };
 
-struct wl12xx_platform_data omap_panda_wlan_data  __initdata = {
+static struct wl12xx_platform_data omap_panda_wlan_data  __initdata = {
 	/* PANDA ref clock is 38.4 MHz */
 	.board_ref_clock = 2,
 };
 
-static int omap4_twl6030_hsmmc_late_init(struct device *dev)
-{
-	int irq = 0;
-	struct platform_device *pdev = container_of(dev,
-				struct platform_device, dev);
-	struct omap_mmc_platform_data *pdata = dev->platform_data;
-
-	if (!pdata) {
-		dev_err(dev, "%s: NULL platform data\n", __func__);
-		return -EINVAL;
-	}
-	/* Setting MMC1 Card detect Irq */
-	if (pdev->id == 0) {
-		irq = twl6030_mmc_card_detect_config();
-		if (irq < 0) {
-			dev_err(dev, "%s: Error card detect config(%d)\n",
-				__func__, irq);
-			return irq;
-		}
-		pdata->slots[0].card_detect = twl6030_mmc_card_detect;
-	}
-	return 0;
-}
-
-static __init void omap4_twl6030_hsmmc_set_late_init(struct device *dev)
-{
-	struct omap_mmc_platform_data *pdata;
-
-	/* dev can be null if CONFIG_MMC_OMAP_HS is not set */
-	if (!dev) {
-		pr_err("Failed omap4_twl6030_hsmmc_set_late_init\n");
-		return;
-	}
-	pdata = dev->platform_data;
-
-	pdata->init =	omap4_twl6030_hsmmc_late_init;
-}
-
-static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
-{
-	struct omap2_hsmmc_info *c;
-
-	omap_hsmmc_init(controllers);
-	for (c = controllers; c->mmc; c++)
-		omap4_twl6030_hsmmc_set_late_init(&c->pdev->dev);
-
-	return 0;
-}
-
-static struct twl4030_codec_data twl6040_codec = {
+static struct twl6040_codec_data twl6040_codec = {
 	/* single-step ramp for headset and handsfree */
 	.hs_left_step	= 0x0f,
 	.hs_right_step	= 0x0f,
@@ -292,17 +260,14 @@ static struct twl4030_codec_data twl6040_codec = {
 	.hf_right_step	= 0x1d,
 };
 
-static struct twl4030_audio_data twl6040_audio = {
+static struct twl6040_platform_data twl6040_data = {
 	.codec		= &twl6040_codec,
 	.audpwron_gpio	= 127,
-	.naudint_irq	= OMAP44XX_IRQ_SYS_2N,
 	.irq_base	= TWL6040_CODEC_IRQ_BASE,
 };
 
 /* Panda board uses the common PMIC configuration */
-static struct twl4030_platform_data omap4_panda_twldata = {
-	.audio		= &twl6040_audio,
-};
+static struct twl4030_platform_data omap4_panda_twldata;
 
 /*
  * Display monitor features are burnt in their EEPROM as EDID data. The EEPROM
@@ -325,8 +290,11 @@ static int __init omap4_panda_i2c_init(void)
 			TWL_COMMON_REGULATOR_VANA |
 			TWL_COMMON_REGULATOR_VCXIO |
 			TWL_COMMON_REGULATOR_VUSB |
-			TWL_COMMON_REGULATOR_CLK32KG);
-	omap4_pmic_init("twl6030", &omap4_panda_twldata);
+			TWL_COMMON_REGULATOR_CLK32KG |
+			TWL_COMMON_REGULATOR_V1V8 |
+			TWL_COMMON_REGULATOR_V2V1);
+	omap4_pmic_init("twl6030", &omap4_panda_twldata,
+			&twl6040_data, OMAP44XX_IRQ_SYS_2N);
 	omap_register_i2c_bus(2, 400, NULL, 0);
 	/*
 	 * Bus 3 is attached to the DVI port where devices like the pico DLP
@@ -421,47 +389,22 @@ static struct omap_board_mux board_mux[] __initdata = {
 /* Display DVI */
 #define PANDA_DVI_TFP410_POWER_DOWN_GPIO	0
 
-static int omap4_panda_enable_dvi(struct omap_dss_device *dssdev)
-{
-	gpio_set_value(dssdev->reset_gpio, 1);
-	return 0;
-}
-
-static void omap4_panda_disable_dvi(struct omap_dss_device *dssdev)
-{
-	gpio_set_value(dssdev->reset_gpio, 0);
-}
-
 /* Using generic display panel */
-static struct panel_dvi_platform_data omap4_dvi_panel = {
-	.platform_enable	= omap4_panda_enable_dvi,
-	.platform_disable	= omap4_panda_disable_dvi,
-	.i2c_bus_num = 3,
+static struct tfp410_platform_data omap4_dvi_panel = {
+	.i2c_bus_num		= 3,
+	.power_down_gpio	= PANDA_DVI_TFP410_POWER_DOWN_GPIO,
 };
 
-struct omap_dss_device omap4_panda_dvi_device = {
+static struct omap_dss_device omap4_panda_dvi_device = {
 	.type			= OMAP_DISPLAY_TYPE_DPI,
 	.name			= "dvi",
-	.driver_name		= "dvi",
+	.driver_name		= "tfp410",
 	.data			= &omap4_dvi_panel,
 	.phy.dpi.data_lines	= 24,
 	.reset_gpio		= PANDA_DVI_TFP410_POWER_DOWN_GPIO,
 	.channel		= OMAP_DSS_CHANNEL_LCD2,
 };
 
-int __init omap4_panda_dvi_init(void)
-{
-	int r;
-
-	/* Requesting TFP410 DVI GPIO and disabling it, at bootup */
-	r = gpio_request_one(omap4_panda_dvi_device.reset_gpio,
-				GPIOF_OUT_INIT_LOW, "DVI PD");
-	if (r)
-		pr_err("Failed to get DVI powerdown GPIO\n");
-
-	return r;
-}
-
 static struct gpio panda_hdmi_gpios[] = {
 	{ HDMI_GPIO_CT_CP_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ct_cp_hpd" },
 	{ HDMI_GPIO_LS_OE,	GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" },
@@ -510,13 +453,8 @@ static struct omap_dss_board_info omap4_panda_dss_data = {
 	.default_device	= &omap4_panda_dvi_device,
 };
 
-void __init omap4_panda_display_init(void)
+static void __init omap4_panda_display_init(void)
 {
-	int r;
-
-	r = omap4_panda_dvi_init();
-	if (r)
-		pr_err("error initializing panda DVI\n");
 
 	omap_display_init(&omap4_panda_dss_data);
 
@@ -583,6 +521,7 @@ MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board")
 	.init_irq	= gic_init_irq,
 	.handle_irq	= gic_handle_irq,
 	.init_machine	= omap4_panda_init,
+	.init_late	= omap4430_init_late,
 	.timer		= &omap4_timer,
 	.restart	= omap_prcm_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 668533e2a379..8fa2fc3a4c3c 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -46,7 +46,7 @@
 #include "common.h"
 #include <video/omapdss.h>
 #include <video/omap-panel-generic-dpi.h>
-#include <video/omap-panel-dvi.h>
+#include <video/omap-panel-tfp410.h>
 #include <plat/gpmc.h>
 #include <mach/hardware.h>
 #include <plat/nand.h>
@@ -167,32 +167,15 @@ static void __init overo_display_init(void)
 	gpio_export(OVERO_GPIO_LCD_BL, 0);
 }
 
-static int overo_panel_enable_dvi(struct omap_dss_device *dssdev)
-{
-	if (lcd_enabled) {
-		printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
-		return -EINVAL;
-	}
-	dvi_enabled = 1;
-
-	return 0;
-}
-
-static void overo_panel_disable_dvi(struct omap_dss_device *dssdev)
-{
-	dvi_enabled = 0;
-}
-
-static struct panel_dvi_platform_data dvi_panel = {
-	.platform_enable	= overo_panel_enable_dvi,
-	.platform_disable	= overo_panel_disable_dvi,
+static struct tfp410_platform_data dvi_panel = {
 	.i2c_bus_num		= 3,
+	.power_down_gpio	= -1,
 };
 
 static struct omap_dss_device overo_dvi_device = {
 	.name			= "dvi",
 	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.driver_name		= "dvi",
+	.driver_name		= "tfp410",
 	.data			= &dvi_panel,
 	.phy.dpi.data_lines	= 24,
 };
@@ -498,10 +481,18 @@ static struct gpio overo_bt_gpios[] __initdata = {
 	{ OVERO_GPIO_BT_NRESET, GPIOF_OUT_INIT_HIGH,	"lcd bl enable" },
 };
 
+static struct regulator_consumer_supply dummy_supplies[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+	REGULATOR_SUPPLY("vddvario", "smsc911x.1"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x.1"),
+};
+
 static void __init overo_init(void)
 {
 	int ret;
 
+	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	omap_hsmmc_init(mmc);
 	overo_i2c_init();
@@ -563,6 +554,7 @@ MACHINE_START(OVERO, "Gumstix Overo")
 	.init_irq	= omap3_init_irq,
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= overo_init,
+	.init_late	= omap35xx_init_late,
 	.timer		= &omap3_timer,
 	.restart	= omap_prcm_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c
index ae53d71f0ce0..0ad1bb3bdb98 100644
--- a/arch/arm/mach-omap2/board-rm680.c
+++ b/arch/arm/mach-omap2/board-rm680.c
@@ -151,6 +151,7 @@ MACHINE_START(NOKIA_RM680, "Nokia RM-680 board")
 	.init_irq	= omap3_init_irq,
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= rm680_init,
+	.init_late	= omap3630_init_late,
 	.timer		= &omap3_timer,
 	.restart	= omap_prcm_restart,
 MACHINE_END
@@ -163,6 +164,7 @@ MACHINE_START(NOKIA_RM696, "Nokia RM-696 board")
 	.init_irq	= omap3_init_irq,
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= rm680_init,
+	.init_late	= omap3630_init_late,
 	.timer		= &omap3_timer,
 	.restart	= omap_prcm_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index d87ee0612098..ff53deccecab 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -44,6 +44,7 @@
 #include <linux/leds-lp5523.h>
 
 #include <../drivers/staging/iio/light/tsl2563.h>
+#include <linux/lis3lv02d.h>
 
 #include "mux.h"
 #include "hsmmc.h"
@@ -63,6 +64,9 @@
 #define RX51_TSC2005_RESET_GPIO         104
 #define RX51_TSC2005_IRQ_GPIO           100
 
+#define LIS302_IRQ1_GPIO 181
+#define LIS302_IRQ2_GPIO 180  /* Not yet in use */
+
 /* list all spi devices here */
 enum {
 	RX51_SPI_WL1251,
@@ -73,6 +77,77 @@ enum {
 static struct wl12xx_platform_data wl1251_pdata;
 static struct tsc2005_platform_data tsc2005_pdata;
 
+#if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE)
+static int lis302_setup(void)
+{
+	int err;
+	int irq1 = LIS302_IRQ1_GPIO;
+	int irq2 = LIS302_IRQ2_GPIO;
+
+	/* gpio for interrupt pin 1 */
+	err = gpio_request(irq1, "lis3lv02dl_irq1");
+	if (err) {
+		printk(KERN_ERR "lis3lv02dl: gpio request failed\n");
+		goto out;
+	}
+
+	/* gpio for interrupt pin 2 */
+	err = gpio_request(irq2, "lis3lv02dl_irq2");
+	if (err) {
+		gpio_free(irq1);
+		printk(KERN_ERR "lis3lv02dl: gpio request failed\n");
+		goto out;
+	}
+
+	gpio_direction_input(irq1);
+	gpio_direction_input(irq2);
+
+out:
+	return err;
+}
+
+static int lis302_release(void)
+{
+	gpio_free(LIS302_IRQ1_GPIO);
+	gpio_free(LIS302_IRQ2_GPIO);
+
+	return 0;
+}
+
+static struct lis3lv02d_platform_data rx51_lis3lv02d_data = {
+	.click_flags    = LIS3_CLICK_SINGLE_X | LIS3_CLICK_SINGLE_Y |
+			  LIS3_CLICK_SINGLE_Z,
+	/* Limits are 0.5g * value */
+	.click_thresh_x = 8,
+	.click_thresh_y = 8,
+	.click_thresh_z = 10,
+	/* Click must be longer than time limit */
+	.click_time_limit = 9,
+	/* Kind of debounce filter */
+	.click_latency    = 50,
+
+	/* Limits for all axis. millig-value / 18 to get HW values */
+	.wakeup_flags = LIS3_WAKEUP_X_HI | LIS3_WAKEUP_Y_HI,
+	.wakeup_thresh = 800 / 18,
+	.wakeup_flags2 = LIS3_WAKEUP_Z_HI ,
+	.wakeup_thresh2 = 900 / 18,
+
+	.hipass_ctrl = LIS3_HIPASS1_DISABLE | LIS3_HIPASS2_DISABLE,
+
+	/* Interrupt line 2 for click detection, line 1 for thresholds */
+	.irq_cfg = LIS3_IRQ2_CLICK | LIS3_IRQ1_FF_WU_12,
+
+	.axis_x = LIS3_DEV_X,
+	.axis_y = LIS3_INV_DEV_Y,
+	.axis_z = LIS3_INV_DEV_Z,
+	.setup_resources = lis302_setup,
+	.release_resources = lis302_release,
+	.st_min_limits = {-32, 3, 3},
+	.st_max_limits = {-3, 32, 32},
+	.irq2 = OMAP_GPIO_IRQ(LIS302_IRQ2_GPIO),
+};
+#endif
+
 #if defined(CONFIG_SENSORS_TSL2563) || defined(CONFIG_SENSORS_TSL2563_MODULE)
 static struct tsl2563_platform_data rx51_tsl2563_platform_data = {
 	.cover_comp_gain = 16,
@@ -872,11 +947,11 @@ static struct twl4030_power_data rx51_t2scripts_data __initdata = {
 	.resource_config = twl4030_rconfig,
 };
 
-struct twl4030_vibra_data rx51_vibra_data __initdata = {
+static struct twl4030_vibra_data rx51_vibra_data __initdata = {
 	.coexist	= 0,
 };
 
-struct twl4030_audio_data rx51_audio_data __initdata = {
+static struct twl4030_audio_data rx51_audio_data __initdata = {
 	.audio_mclk	= 26000000,
 	.vibra		= &rx51_vibra_data,
 };
@@ -950,6 +1025,16 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = {
 	}
 };
 
+static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_3[] = {
+#if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE)
+	{
+		I2C_BOARD_INFO("lis3lv02d", 0x1d),
+		.platform_data = &rx51_lis3lv02d_data,
+		.irq = OMAP_GPIO_IRQ(LIS302_IRQ1_GPIO),
+	},
+#endif
+};
+
 static int __init rx51_i2c_init(void)
 {
 	if ((system_rev >= SYSTEM_REV_S_USES_VAUX3 && system_rev < 0x100) ||
@@ -971,7 +1056,8 @@ static int __init rx51_i2c_init(void)
 	omap_pmic_init(1, 2200, "twl5030", INT_34XX_SYS_NIRQ, &rx51_twldata);
 	omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2,
 			      ARRAY_SIZE(rx51_peripherals_i2c_board_info_2));
-	omap_register_i2c_bus(3, 400, NULL, 0);
+	omap_register_i2c_bus(3, 400, rx51_peripherals_i2c_board_info_3,
+			      ARRAY_SIZE(rx51_peripherals_i2c_board_info_3));
 	return 0;
 }
 
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index 27f01f051dff..345dd931f76f 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -59,25 +59,24 @@ static struct platform_device leds_gpio = {
 };
 
 /*
- * cpuidle C-states definition override from the default values.
- * The 'exit_latency' field is the sum of sleep and wake-up latencies.
- */
-static struct cpuidle_params rx51_cpuidle_params[] = {
-	/* C1 */
-	{110 + 162, 5 , 1},
-	/* C2 */
-	{106 + 180, 309, 1},
-	/* C3 */
-	{107 + 410, 46057, 0},
-	/* C4 */
-	{121 + 3374, 46057, 0},
-	/* C5 */
-	{855 + 1146, 46057, 1},
-	/* C6 */
-	{7580 + 4134, 484329, 0},
-	/* C7 */
-	{7505 + 15274, 484329, 1},
-};
+ * cpuidle C-states definition for rx51.
+ *
+ * The 'exit_latency' field is the sum of sleep
+ * and wake-up latencies.
+
+    ---------------------------------------------
+   | state |  exit_latency  |  target_residency  |
+    ---------------------------------------------
+   |  C1   |    110 + 162   |            5       |
+   |  C2   |    106 + 180   |          309       |
+   |  C3   |    107 + 410   |        46057       |
+   |  C4   |    121 + 3374  |        46057       |
+   |  C5   |    855 + 1146  |        46057       |
+   |  C6   |   7580 + 4134  |       484329       |
+   |  C7   |   7505 + 15274 |       484329       |
+    ---------------------------------------------
+
+*/
 
 extern void __init rx51_peripherals_init(void);
 
@@ -98,7 +97,6 @@ static void __init rx51_init(void)
 	struct omap_sdrc_params *sdrc_params;
 
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
-	omap3_pm_init_cpuidle(rx51_cpuidle_params);
 	omap_serial_init();
 
 	sdrc_params = nokia_get_sdram_timings();
@@ -129,6 +127,7 @@ MACHINE_START(NOKIA_RX51, "Nokia RX-51 board")
 	.init_irq	= omap3_init_irq,
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= rx51_init,
+	.init_late	= omap3430_init_late,
 	.timer		= &omap3_timer,
 	.restart	= omap_prcm_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-ti8168evm.c b/arch/arm/mach-omap2/board-ti8168evm.c
index ab9a7a9e9d64..d4c8392cadb6 100644
--- a/arch/arm/mach-omap2/board-ti8168evm.c
+++ b/arch/arm/mach-omap2/board-ti8168evm.c
@@ -52,6 +52,7 @@ MACHINE_START(TI8168EVM, "ti8168evm")
 	.init_irq	= ti81xx_init_irq,
 	.timer		= &omap3_timer,
 	.init_machine	= ti81xx_evm_init,
+	.init_late	= ti81xx_init_late,
 	.restart	= omap_prcm_restart,
 MACHINE_END
 
@@ -63,5 +64,6 @@ MACHINE_START(TI8148EVM, "ti8148evm")
 	.init_irq	= ti81xx_init_irq,
 	.timer		= &omap3_timer,
 	.init_machine	= ti81xx_evm_init,
+	.init_late	= ti81xx_init_late,
 	.restart	= omap_prcm_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c
index 1e8540eabde9..f64f44173061 100644
--- a/arch/arm/mach-omap2/board-zoom-debugboard.c
+++ b/arch/arm/mach-omap2/board-zoom-debugboard.c
@@ -14,6 +14,9 @@
 #include <linux/smsc911x.h>
 #include <linux/interrupt.h>
 
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
+
 #include <plat/gpmc.h>
 #include <plat/gpmc-smsc911x.h>
 
@@ -117,11 +120,17 @@ static struct platform_device *zoom_devices[] __initdata = {
 	&zoom_debugboard_serial_device,
 };
 
+static struct regulator_consumer_supply dummy_supplies[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+};
+
 int __init zoom_debugboard_init(void)
 {
 	if (!omap_zoom_debugboard_detect())
 		return 0;
 
+	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
 	zoom_init_smsc911x();
 	zoom_init_quaduart();
 	return platform_add_devices(zoom_devices, ARRAY_SIZE(zoom_devices));
diff --git a/arch/arm/mach-omap2/board-zoom-display.c b/arch/arm/mach-omap2/board-zoom-display.c
index a43a765dd092..28187f134fff 100644
--- a/arch/arm/mach-omap2/board-zoom-display.c
+++ b/arch/arm/mach-omap2/board-zoom-display.c
@@ -16,6 +16,7 @@
 #include <linux/spi/spi.h>
 #include <plat/mcspi.h>
 #include <video/omapdss.h>
+#include <mach/board-zoom.h>
 
 #define LCD_PANEL_RESET_GPIO_PROD	96
 #define LCD_PANEL_RESET_GPIO_PILOT	55
diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c
index 5c20bcc57f2b..4e7e56142e6f 100644
--- a/arch/arm/mach-omap2/board-zoom.c
+++ b/arch/arm/mach-omap2/board-zoom.c
@@ -137,6 +137,7 @@ MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
 	.init_irq	= omap3_init_irq,
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap_zoom_init,
+	.init_late	= omap3430_init_late,
 	.timer		= &omap3_timer,
 	.restart	= omap_prcm_restart,
 MACHINE_END
@@ -149,6 +150,7 @@ MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
 	.init_irq	= omap3_init_irq,
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap_zoom_init,
+	.init_late	= omap3630_init_late,
 	.timer		= &omap3_timer,
 	.restart	= omap_prcm_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
index 7072e0d651b1..3d9d746b221a 100644
--- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
+++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
@@ -165,83 +165,3 @@ int omap2_select_table_rate(struct clk *clk, unsigned long rate)
 
 	return 0;
 }
-
-#ifdef CONFIG_CPU_FREQ
-/*
- * Walk PRCM rate table and fillout cpufreq freq_table
- * XXX This should be replaced by an OPP layer in the near future
- */
-static struct cpufreq_frequency_table *freq_table;
-
-void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table)
-{
-	const struct prcm_config *prcm;
-	int i = 0;
-	int tbl_sz = 0;
-
-	if (!cpu_is_omap24xx())
-		return;
-
-	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
-		if (!(prcm->flags & cpu_mask))
-			continue;
-		if (prcm->xtal_speed != sclk->rate)
-			continue;
-
-		/* don't put bypass rates in table */
-		if (prcm->dpll_speed == prcm->xtal_speed)
-			continue;
-
-		tbl_sz++;
-	}
-
-	/*
-	 * XXX Ensure that we're doing what CPUFreq expects for this error
-	 * case and the following one
-	 */
-	if (tbl_sz == 0) {
-		pr_warning("%s: no matching entries in rate_table\n",
-			   __func__);
-		return;
-	}
-
-	/* Include the CPUFREQ_TABLE_END terminator entry */
-	tbl_sz++;
-
-	freq_table = kzalloc(sizeof(struct cpufreq_frequency_table) * tbl_sz,
-			     GFP_ATOMIC);
-	if (!freq_table) {
-		pr_err("%s: could not kzalloc frequency table\n", __func__);
-		return;
-	}
-
-	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
-		if (!(prcm->flags & cpu_mask))
-			continue;
-		if (prcm->xtal_speed != sclk->rate)
-			continue;
-
-		/* don't put bypass rates in table */
-		if (prcm->dpll_speed == prcm->xtal_speed)
-			continue;
-
-		freq_table[i].index = i;
-		freq_table[i].frequency = prcm->mpu_speed / 1000;
-		i++;
-	}
-
-	freq_table[i].index = i;
-	freq_table[i].frequency = CPUFREQ_TABLE_END;
-
-	*table = &freq_table[0];
-}
-
-void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table)
-{
-	if (!cpu_is_omap24xx())
-		return;
-
-	kfree(freq_table);
-}
-
-#endif
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index f57ed5baeccf..5c4e66542169 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -439,7 +439,7 @@ void omap2_clk_disable_unused(struct clk *clk)
 		clk->ops->disable(clk);
 	}
 	if (clk->clkdm != NULL)
-		pwrdm_clkdm_state_switch(clk->clkdm);
+		pwrdm_state_switch(clk->clkdm->pwrdm.ptr);
 }
 #endif
 
@@ -536,10 +536,5 @@ struct clk_functions omap2_clk_functions = {
 	.clk_set_rate		= omap2_clk_set_rate,
 	.clk_set_parent		= omap2_clk_set_parent,
 	.clk_disable_unused	= omap2_clk_disable_unused,
-#ifdef CONFIG_CPU_FREQ
-	/* These will be removed when the OPP code is integrated */
-	.clk_init_cpufreq_table	= omap2_clk_init_cpufreq_table,
-	.clk_exit_cpufreq_table	= omap2_clk_exit_cpufreq_table,
-#endif
 };
 
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index b8c2a686481c..a1bb23a23351 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -146,14 +146,6 @@ extern const struct clksel_rate gpt_sys_rates[];
 extern const struct clksel_rate gfx_l3_rates[];
 extern const struct clksel_rate dsp_ick_rates[];
 
-#if defined(CONFIG_ARCH_OMAP2) && defined(CONFIG_CPU_FREQ)
-extern void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table);
-extern void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table);
-#else
-#define omap2_clk_init_cpufreq_table	0
-#define omap2_clk_exit_cpufreq_table	0
-#endif
-
 extern const struct clkops clkops_omap2_iclk_dflt_wait;
 extern const struct clkops clkops_omap2_iclk_dflt;
 extern const struct clkops clkops_omap2_iclk_idle_only;
diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c
index 480fb8f09aed..4e1a3b0e8cc8 100644
--- a/arch/arm/mach-omap2/clock3xxx_data.c
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
@@ -1,7 +1,7 @@
 /*
  * OMAP3 clock data
  *
- * Copyright (C) 2007-2010 Texas Instruments, Inc.
+ * Copyright (C) 2007-2010, 2012 Texas Instruments, Inc.
  * Copyright (C) 2007-2011 Nokia Corporation
  *
  * Written by Paul Walmsley
@@ -747,7 +747,7 @@ static struct clk dpll4_m3_ck = {
 	.parent		= &dpll4_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_TV_MASK,
+	.clksel_mask	= OMAP3630_CLKSEL_TV_MASK,
 	.clksel		= dpll4_clksel,
 	.clkdm_name	= "dpll4_clkdm",
 	.recalc		= &omap2_clksel_recalc,
@@ -832,7 +832,7 @@ static struct clk dpll4_m4_ck = {
 	.parent		= &dpll4_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_DSS1_MASK,
+	.clksel_mask	= OMAP3630_CLKSEL_DSS1_MASK,
 	.clksel		= dpll4_clksel,
 	.clkdm_name	= "dpll4_clkdm",
 	.recalc		= &omap2_clksel_recalc,
@@ -859,7 +859,7 @@ static struct clk dpll4_m5_ck = {
 	.parent		= &dpll4_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_CAM_MASK,
+	.clksel_mask	= OMAP3630_CLKSEL_CAM_MASK,
 	.clksel		= dpll4_clksel,
 	.clkdm_name	= "dpll4_clkdm",
 	.set_rate	= &omap2_clksel_set_rate,
@@ -886,7 +886,7 @@ static struct clk dpll4_m6_ck = {
 	.parent		= &dpll4_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP3430_DIV_DPLL4_MASK,
+	.clksel_mask	= OMAP3630_DIV_DPLL4_MASK,
 	.clksel		= dpll4_clksel,
 	.clkdm_name	= "dpll4_clkdm",
 	.recalc		= &omap2_clksel_recalc,
@@ -1394,6 +1394,7 @@ static struct clk cpefuse_fck = {
 	.name		= "cpefuse_fck",
 	.ops		= &clkops_omap2_dflt,
 	.parent		= &sys_ck,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3),
 	.enable_bit	= OMAP3430ES2_EN_CPEFUSE_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -1403,6 +1404,7 @@ static struct clk ts_fck = {
 	.name		= "ts_fck",
 	.ops		= &clkops_omap2_dflt,
 	.parent		= &omap_32k_fck,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3),
 	.enable_bit	= OMAP3430ES2_EN_TS_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -1412,6 +1414,7 @@ static struct clk usbtll_fck = {
 	.name		= "usbtll_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &dpll5_m2_ck,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3),
 	.enable_bit	= OMAP3430ES2_EN_USBTLL_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -1617,6 +1620,7 @@ static struct clk fshostusb_fck = {
 	.name		= "fshostusb_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_48m_fck,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430ES1_EN_FSHOSTUSB_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -1636,6 +1640,7 @@ static struct clk hdq_fck = {
 	.name		= "hdq_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_12m_fck,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_HDQ_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -2043,6 +2048,7 @@ static struct clk omapctrl_ick = {
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_OMAPCTRL_SHIFT,
 	.flags		= ENABLE_ON_INIT,
+	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -2094,6 +2100,7 @@ static struct clk usb_l4_ick = {
 	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP3430ES1_CLKSEL_FSHOSTUSB_MASK,
 	.clksel		= usb_l4_clksel,
+	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -3288,8 +3295,8 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"gfx_l3_ick",	&gfx_l3_ick,	CK_3430ES1),
 	CLK(NULL,	"gfx_cg1_ck",	&gfx_cg1_ck,	CK_3430ES1),
 	CLK(NULL,	"gfx_cg2_ck",	&gfx_cg2_ck,	CK_3430ES1),
-	CLK(NULL,	"sgx_fck",	&sgx_fck,	CK_3430ES2PLUS | CK_3517 | CK_36XX),
-	CLK(NULL,	"sgx_ick",	&sgx_ick,	CK_3430ES2PLUS | CK_3517 | CK_36XX),
+	CLK(NULL,	"sgx_fck",	&sgx_fck,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
+	CLK(NULL,	"sgx_ick",	&sgx_ick,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK(NULL,	"d2d_26m_fck",	&d2d_26m_fck,	CK_3430ES1),
 	CLK(NULL,	"modem_fck",	&modem_fck,	CK_34XX | CK_36XX),
 	CLK(NULL,	"sad2d_ick",	&sad2d_ick,	CK_34XX | CK_36XX),
@@ -3413,7 +3420,7 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"per_48m_fck",	&per_48m_fck,	CK_3XXX),
 	CLK(NULL,	"uart3_fck",	&uart3_fck,	CK_3XXX),
 	CLK(NULL,	"uart4_fck",	&uart4_fck,	CK_36XX),
-	CLK(NULL,	"uart4_fck",	&uart4_fck_am35xx, CK_3505 | CK_3517),
+	CLK(NULL,	"uart4_fck",	&uart4_fck_am35xx, CK_AM35XX),
 	CLK(NULL,	"gpt2_fck",	&gpt2_fck,	CK_3XXX),
 	CLK(NULL,	"gpt3_fck",	&gpt3_fck,	CK_3XXX),
 	CLK(NULL,	"gpt4_fck",	&gpt4_fck,	CK_3XXX),
@@ -3467,8 +3474,8 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"ipss_ick",	&ipss_ick,	CK_AM35XX),
 	CLK(NULL,	"rmii_ck",	&rmii_ck,	CK_AM35XX),
 	CLK(NULL,	"pclk_ck",	&pclk_ck,	CK_AM35XX),
-	CLK("davinci_emac",	"emac_clk",	&emac_ick,	CK_AM35XX),
-	CLK("davinci_emac",	"phy_clk",	&emac_fck,	CK_AM35XX),
+	CLK("davinci_emac",	NULL,	&emac_ick,	CK_AM35XX),
+	CLK("davinci_mdio.0",	NULL,	&emac_fck,	CK_AM35XX),
 	CLK("vpfe-capture",	"master",	&vpfe_ick,	CK_AM35XX),
 	CLK("vpfe-capture",	"slave",	&vpfe_fck,	CK_AM35XX),
 	CLK("musb-am35x",	"ick",		&hsotgusb_ick_am35xx,	CK_AM35XX),
@@ -3507,21 +3514,9 @@ int __init omap3xxx_clk_init(void)
 	struct omap_clk *c;
 	u32 cpu_clkflg = 0;
 
-	/*
-	 * 3505 must be tested before 3517, since 3517 returns true
-	 * for both AM3517 chips and AM3517 family chips, which
-	 * includes 3505.  Unfortunately there's no obvious family
-	 * test for 3517/3505 :-(
-	 */
-	if (cpu_is_omap3505()) {
-		cpu_mask = RATE_IN_34XX;
-		cpu_clkflg = CK_3505;
-	} else if (cpu_is_omap3517()) {
-		cpu_mask = RATE_IN_34XX;
-		cpu_clkflg = CK_3517;
-	} else if (cpu_is_omap3505()) {
+	if (cpu_is_omap3517()) {
 		cpu_mask = RATE_IN_34XX;
-		cpu_clkflg = CK_3505;
+		cpu_clkflg = CK_AM35XX;
 	} else if (cpu_is_omap3630()) {
 		cpu_mask = (RATE_IN_34XX | RATE_IN_36XX);
 		cpu_clkflg = CK_36XX;
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index c03c1108468e..2172f6603848 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -957,8 +957,8 @@ static struct dpll_data dpll_usb_dd = {
 	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
 	.autoidle_reg	= OMAP4430_CM_AUTOIDLE_DPLL_USB,
 	.idlest_reg	= OMAP4430_CM_IDLEST_DPLL_USB,
-	.mult_mask	= OMAP4430_DPLL_MULT_MASK,
-	.div1_mask	= OMAP4430_DPLL_DIV_MASK,
+	.mult_mask	= OMAP4430_DPLL_MULT_USB_MASK,
+	.div1_mask	= OMAP4430_DPLL_DIV_0_7_MASK,
 	.enable_mask	= OMAP4430_DPLL_EN_MASK,
 	.autoidle_mask	= OMAP4430_AUTO_DPLL_MODE_MASK,
 	.idlest_mask	= OMAP4430_ST_DPLL_CLK_MASK,
@@ -978,6 +978,7 @@ static struct clk dpll_usb_ck = {
 	.recalc		= &omap3_dpll_recalc,
 	.round_rate	= &omap2_dpll_round_rate,
 	.set_rate	= &omap3_noncore_dpll_set_rate,
+	.clkdm_name	= "l3_init_clkdm",
 };
 
 static struct clk dpll_usb_clkdcoldo_ck = {
@@ -3354,17 +3355,6 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK(NULL,	"auxclk5_ck",			&auxclk5_ck,	CK_443X),
 	CLK(NULL,	"auxclkreq5_ck",		&auxclkreq5_ck,	CK_443X),
 	CLK(NULL,	"gpmc_ck",			&dummy_ck,	CK_443X),
-	CLK(NULL,	"gpt1_ick",			&dummy_ck,	CK_443X),
-	CLK(NULL,	"gpt2_ick",			&dummy_ck,	CK_443X),
-	CLK(NULL,	"gpt3_ick",			&dummy_ck,	CK_443X),
-	CLK(NULL,	"gpt4_ick",			&dummy_ck,	CK_443X),
-	CLK(NULL,	"gpt5_ick",			&dummy_ck,	CK_443X),
-	CLK(NULL,	"gpt6_ick",			&dummy_ck,	CK_443X),
-	CLK(NULL,	"gpt7_ick",			&dummy_ck,	CK_443X),
-	CLK(NULL,	"gpt8_ick",			&dummy_ck,	CK_443X),
-	CLK(NULL,	"gpt9_ick",			&dummy_ck,	CK_443X),
-	CLK(NULL,	"gpt10_ick",			&dummy_ck,	CK_443X),
-	CLK(NULL,	"gpt11_ick",			&dummy_ck,	CK_443X),
 	CLK("omap_i2c.1",	"ick",				&dummy_ck,	CK_443X),
 	CLK("omap_i2c.2",	"ick",				&dummy_ck,	CK_443X),
 	CLK("omap_i2c.3",	"ick",				&dummy_ck,	CK_443X),
diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index ad07689e1563..8664f5a8bfb6 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -840,7 +840,7 @@ void clkdm_allow_idle(struct clockdomain *clkdm)
 	spin_lock_irqsave(&clkdm->lock, flags);
 	clkdm->_flags |= _CLKDM_FLAG_HWSUP_ENABLED;
 	arch_clkdm->clkdm_allow_idle(clkdm);
-	pwrdm_clkdm_state_switch(clkdm);
+	pwrdm_state_switch(clkdm->pwrdm.ptr);
 	spin_unlock_irqrestore(&clkdm->lock, flags);
 }
 
@@ -924,8 +924,7 @@ static int _clkdm_clk_hwmod_enable(struct clockdomain *clkdm)
 
 	spin_lock_irqsave(&clkdm->lock, flags);
 	arch_clkdm->clkdm_clk_enable(clkdm);
-	pwrdm_wait_transition(clkdm->pwrdm.ptr);
-	pwrdm_clkdm_state_switch(clkdm);
+	pwrdm_state_switch(clkdm->pwrdm.ptr);
 	spin_unlock_irqrestore(&clkdm->lock, flags);
 
 	pr_debug("clockdomain: clkdm %s: enabled\n", clkdm->name);
@@ -950,7 +949,7 @@ static int _clkdm_clk_hwmod_disable(struct clockdomain *clkdm)
 
 	spin_lock_irqsave(&clkdm->lock, flags);
 	arch_clkdm->clkdm_clk_disable(clkdm);
-	pwrdm_clkdm_state_switch(clkdm);
+	pwrdm_state_switch(clkdm->pwrdm.ptr);
 	spin_unlock_irqrestore(&clkdm->lock, flags);
 
 	pr_debug("clockdomain: clkdm %s: disabled\n", clkdm->name);
diff --git a/arch/arm/mach-omap2/clockdomain44xx.c b/arch/arm/mach-omap2/clockdomain44xx.c
index 935c7f03dab9..4f04dd11d655 100644
--- a/arch/arm/mach-omap2/clockdomain44xx.c
+++ b/arch/arm/mach-omap2/clockdomain44xx.c
@@ -51,6 +51,9 @@ static int omap4_clkdm_clear_all_wkup_sleep_deps(struct clockdomain *clkdm)
 	struct clkdm_dep *cd;
 	u32 mask = 0;
 
+	if (!clkdm->prcm_partition)
+		return 0;
+
 	for (cd = clkdm->wkdep_srcs; cd && cd->clkdm_name; cd++) {
 		if (!cd->clkdm)
 			continue; /* only happens if data is erroneous */
@@ -103,6 +106,9 @@ static int omap4_clkdm_clk_disable(struct clockdomain *clkdm)
 {
 	bool hwsup = false;
 
+	if (!clkdm->prcm_partition)
+		return 0;
+
 	hwsup = omap4_cminst_is_clkdm_in_hwsup(clkdm->prcm_partition,
 					clkdm->cm_inst, clkdm->clkdm_offs);
 
diff --git a/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c b/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c
index 0a6a04897d89..839145e1cfbe 100644
--- a/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c
+++ b/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c
@@ -89,13 +89,3 @@ struct clockdomain wkup_common_clkdm = {
 	.pwrdm		= { .name = "wkup_pwrdm" },
 	.dep_bit	= OMAP_EN_WKUP_SHIFT,
 };
-
-struct clockdomain prm_common_clkdm = {
-	.name		= "prm_clkdm",
-	.pwrdm		= { .name = "wkup_pwrdm" },
-};
-
-struct clockdomain cm_common_clkdm = {
-	.name		= "cm_clkdm",
-	.pwrdm		= { .name = "core_pwrdm" },
-};
diff --git a/arch/arm/mach-omap2/clockdomains3xxx_data.c b/arch/arm/mach-omap2/clockdomains3xxx_data.c
index b84e138d99c8..6038adb97710 100644
--- a/arch/arm/mach-omap2/clockdomains3xxx_data.c
+++ b/arch/arm/mach-omap2/clockdomains3xxx_data.c
@@ -53,9 +53,9 @@
  * 3430ES2 PM_WKDEP_SGX: adds IVA2, removes CORE
  */
 static struct clkdm_dep gfx_sgx_3xxx_wkdeps[] = {
-	{ .clkdm_name = "iva2_clkdm", },
-	{ .clkdm_name = "mpu_clkdm", },
-	{ .clkdm_name = "wkup_clkdm", },
+	{ .clkdm_name = "iva2_clkdm" },
+	{ .clkdm_name = "mpu_clkdm" },
+	{ .clkdm_name = "wkup_clkdm" },
 	{ NULL },
 };
 
diff --git a/arch/arm/mach-omap2/clockdomains44xx_data.c b/arch/arm/mach-omap2/clockdomains44xx_data.c
index 9299ac291d28..c53425847493 100644
--- a/arch/arm/mach-omap2/clockdomains44xx_data.c
+++ b/arch/arm/mach-omap2/clockdomains44xx_data.c
@@ -390,7 +390,7 @@ static struct clockdomain emu_sys_44xx_clkdm = {
 	.prcm_partition	  = OMAP4430_PRM_PARTITION,
 	.cm_inst	  = OMAP4430_PRM_EMU_CM_INST,
 	.clkdm_offs	  = OMAP4430_PRM_EMU_CM_EMU_CDOFFS,
-	.flags		  = CLKDM_CAN_HWSUP,
+	.flags		  = CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_FORCE_WAKEUP,
 };
 
 static struct clockdomain l3_dma_44xx_clkdm = {
@@ -430,6 +430,8 @@ static struct clockdomain *clockdomains_omap44xx[] __initdata = {
 	&l4_wkup_44xx_clkdm,
 	&emu_sys_44xx_clkdm,
 	&l3_dma_44xx_clkdm,
+	&prm_common_clkdm,
+	&cm_common_clkdm,
 	NULL
 };
 
diff --git a/arch/arm/mach-omap2/clockdomains_common_data.c b/arch/arm/mach-omap2/clockdomains_common_data.c
new file mode 100644
index 000000000000..615b1f04967d
--- /dev/null
+++ b/arch/arm/mach-omap2/clockdomains_common_data.c
@@ -0,0 +1,24 @@
+/*
+ * OMAP2+-common clockdomain data
+ *
+ * Copyright (C) 2008-2012 Texas Instruments, Inc.
+ * Copyright (C) 2008-2010 Nokia Corporation
+ *
+ * Paul Walmsley, Jouni Högander
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+
+#include "clockdomain.h"
+
+/* These are implicit clockdomains - they are never defined as such in TRM */
+struct clockdomain prm_common_clkdm = {
+	.name		= "prm_clkdm",
+	.pwrdm		= { .name = "wkup_pwrdm" },
+};
+
+struct clockdomain cm_common_clkdm = {
+	.name		= "cm_clkdm",
+	.pwrdm		= { .name = "core_pwrdm" },
+};
diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h
index b91275908f33..8083a8cdc55f 100644
--- a/arch/arm/mach-omap2/cm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-34xx.h
@@ -79,7 +79,7 @@
 
 /* CM_CLKSEL1_PLL_IVA2 */
 #define OMAP3430_IVA2_CLK_SRC_SHIFT			19
-#define OMAP3430_IVA2_CLK_SRC_MASK			(0x3 << 19)
+#define OMAP3430_IVA2_CLK_SRC_MASK			(0x7 << 19)
 #define OMAP3430_IVA2_DPLL_MULT_SHIFT			8
 #define OMAP3430_IVA2_DPLL_MULT_MASK			(0x7ff << 8)
 #define OMAP3430_IVA2_DPLL_DIV_SHIFT			0
@@ -124,7 +124,7 @@
 
 /* CM_CLKSEL1_PLL_MPU */
 #define OMAP3430_MPU_CLK_SRC_SHIFT			19
-#define OMAP3430_MPU_CLK_SRC_MASK			(0x3 << 19)
+#define OMAP3430_MPU_CLK_SRC_MASK			(0x7 << 19)
 #define OMAP3430_MPU_DPLL_MULT_SHIFT			8
 #define OMAP3430_MPU_DPLL_MULT_MASK			(0x7ff << 8)
 #define OMAP3430_MPU_DPLL_DIV_SHIFT			0
diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c
index bd8810c3753f..8c86d294b1a3 100644
--- a/arch/arm/mach-omap2/cminst44xx.c
+++ b/arch/arm/mach-omap2/cminst44xx.c
@@ -32,6 +32,7 @@
 #include "prcm44xx.h"
 #include "prm44xx.h"
 #include "prcm_mpu44xx.h"
+#include "prcm-common.h"
 
 /*
  * CLKCTRL_IDLEST_*: possible values for the CM_*_CLKCTRL.IDLEST bitfield:
@@ -49,14 +50,21 @@
 #define CLKCTRL_IDLEST_INTERFACE_IDLE		0x2
 #define CLKCTRL_IDLEST_DISABLED			0x3
 
-static u32 _cm_bases[OMAP4_MAX_PRCM_PARTITIONS] = {
-	[OMAP4430_INVALID_PRCM_PARTITION]	= 0,
-	[OMAP4430_PRM_PARTITION]		= OMAP4430_PRM_BASE,
-	[OMAP4430_CM1_PARTITION]		= OMAP4430_CM1_BASE,
-	[OMAP4430_CM2_PARTITION]		= OMAP4430_CM2_BASE,
-	[OMAP4430_SCRM_PARTITION]		= 0,
-	[OMAP4430_PRCM_MPU_PARTITION]		= OMAP4430_PRCM_MPU_BASE,
-};
+static void __iomem *_cm_bases[OMAP4_MAX_PRCM_PARTITIONS];
+
+/**
+ * omap_cm_base_init - Populates the cm partitions
+ *
+ * Populates the base addresses of the _cm_bases
+ * array used for read/write of cm module registers.
+ */
+void omap_cm_base_init(void)
+{
+	_cm_bases[OMAP4430_PRM_PARTITION] = prm_base;
+	_cm_bases[OMAP4430_CM1_PARTITION] = cm_base;
+	_cm_bases[OMAP4430_CM2_PARTITION] = cm2_base;
+	_cm_bases[OMAP4430_PRCM_MPU_PARTITION] = prcm_mpu_base;
+}
 
 /* Private functions */
 
@@ -106,7 +114,7 @@ u32 omap4_cminst_read_inst_reg(u8 part, s16 inst, u16 idx)
 	BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS ||
 	       part == OMAP4430_INVALID_PRCM_PARTITION ||
 	       !_cm_bases[part]);
-	return __raw_readl(OMAP2_L4_IO_ADDRESS(_cm_bases[part] + inst + idx));
+	return __raw_readl(_cm_bases[part] + inst + idx);
 }
 
 /* Write into a register in a CM instance */
@@ -115,7 +123,7 @@ void omap4_cminst_write_inst_reg(u32 val, u8 part, s16 inst, u16 idx)
 	BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS ||
 	       part == OMAP4430_INVALID_PRCM_PARTITION ||
 	       !_cm_bases[part]);
-	__raw_writel(val, OMAP2_L4_IO_ADDRESS(_cm_bases[part] + inst + idx));
+	__raw_writel(val, _cm_bases[part] + inst + idx);
 }
 
 /* Read-modify-write a register in CM1. Caller must lock */
diff --git a/arch/arm/mach-omap2/common.c b/arch/arm/mach-omap2/common.c
index 1549c11000d3..8a6953a34fe2 100644
--- a/arch/arm/mach-omap2/common.c
+++ b/arch/arm/mach-omap2/common.c
@@ -166,6 +166,7 @@ static struct omap_globals omap4_globals = {
 	.prm	= OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE),
 	.cm	= OMAP2_L4_IO_ADDRESS(OMAP4430_CM_BASE),
 	.cm2	= OMAP2_L4_IO_ADDRESS(OMAP4430_CM2_BASE),
+	.prcm_mpu	= OMAP2_L4_IO_ADDRESS(OMAP4430_PRCM_MPU_BASE),
 };
 
 void __init omap2_set_globals_443x(void)
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index 57da7f406e28..be9dfd1abe60 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -27,6 +27,7 @@
 #ifndef __ASSEMBLER__
 
 #include <linux/delay.h>
+#include <linux/i2c/twl.h>
 #include <plat/common.h>
 #include <asm/proc-fns.h>
 
@@ -54,7 +55,7 @@ static inline void omap34xx_map_common_io(void)
 }
 #endif
 
-#ifdef CONFIG_SOC_OMAPTI81XX
+#ifdef CONFIG_SOC_TI81XX
 extern void omapti81xx_map_common_io(void);
 #else
 static inline void omapti81xx_map_common_io(void)
@@ -62,7 +63,7 @@ static inline void omapti81xx_map_common_io(void)
 }
 #endif
 
-#ifdef CONFIG_SOC_OMAPAM33XX
+#ifdef CONFIG_SOC_AM33XX
 extern void omapam33xx_map_common_io(void);
 #else
 static inline void omapam33xx_map_common_io(void)
@@ -78,6 +79,42 @@ static inline void omap44xx_map_common_io(void)
 }
 #endif
 
+#if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP2)
+int omap2_pm_init(void);
+#else
+static inline int omap2_pm_init(void)
+{
+	return 0;
+}
+#endif
+
+#if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3)
+int omap3_pm_init(void);
+#else
+static inline int omap3_pm_init(void)
+{
+	return 0;
+}
+#endif
+
+#if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP4)
+int omap4_pm_init(void);
+#else
+static inline int omap4_pm_init(void)
+{
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_OMAP_MUX
+int omap_mux_late_init(void);
+#else
+static inline int omap_mux_late_init(void)
+{
+	return 0;
+}
+#endif
+
 extern void omap2_init_common_infrastructure(void);
 
 extern struct sys_timer omap2_timer;
@@ -94,6 +131,17 @@ void omap3_init_early(void);	/* Do not use this one */
 void am35xx_init_early(void);
 void ti81xx_init_early(void);
 void omap4430_init_early(void);
+void omap3_init_late(void);	/* Do not use this one */
+void omap4430_init_late(void);
+void omap2420_init_late(void);
+void omap2430_init_late(void);
+void omap3430_init_late(void);
+void omap35xx_init_late(void);
+void omap3630_init_late(void);
+void am35xx_init_late(void);
+void ti81xx_init_late(void);
+void omap4430_init_late(void);
+int omap2_common_pm_late_init(void);
 void omap_prcm_restart(char, const char *);
 
 /*
@@ -111,6 +159,7 @@ struct omap_globals {
 	void __iomem	*prm;            /* Power and Reset Management */
 	void __iomem	*cm;             /* Clock Management */
 	void __iomem	*cm2;
+	void __iomem	*prcm_mpu;
 };
 
 void omap2_set_globals_242x(void);
@@ -134,8 +183,6 @@ void omap4_map_io(void);
 void ti81xx_map_io(void);
 void omap_barriers_init(void);
 
-extern void __init omap_init_consistent_dma_size(void);
-
 /**
  * omap_test_timeout - busy-loop, testing a condition
  * @cond: condition to test until it evaluates to true
@@ -254,6 +301,8 @@ static inline u32 omap4_mpuss_read_prev_context_state(void)
 struct omap_sdrc_params;
 extern void omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
 				      struct omap_sdrc_params *sdrc_cs1);
+struct omap2_hsmmc_info;
+extern int omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers);
 
 #endif /* __ASSEMBLER__ */
 #endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */
diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c
index 535866489ce3..207bc1c7759f 100644
--- a/arch/arm/mach-omap2/cpuidle34xx.c
+++ b/arch/arm/mach-omap2/cpuidle34xx.c
@@ -38,40 +38,44 @@
 
 #ifdef CONFIG_CPU_IDLE
 
-/*
- * The latencies/thresholds for various C states have
- * to be configured from the respective board files.
- * These are some default values (which might not provide
- * the best power savings) used on boards which do not
- * pass these details from the board file.
- */
-static struct cpuidle_params cpuidle_params_table[] = {
-	/* C1 */
-	{2 + 2, 5, 1},
-	/* C2 */
-	{10 + 10, 30, 1},
-	/* C3 */
-	{50 + 50, 300, 1},
-	/* C4 */
-	{1500 + 1800, 4000, 1},
-	/* C5 */
-	{2500 + 7500, 12000, 1},
-	/* C6 */
-	{3000 + 8500, 15000, 1},
-	/* C7 */
-	{10000 + 30000, 300000, 1},
-};
-#define OMAP3_NUM_STATES ARRAY_SIZE(cpuidle_params_table)
-
 /* Mach specific information to be recorded in the C-state driver_data */
 struct omap3_idle_statedata {
 	u32 mpu_state;
 	u32 core_state;
-	u8 valid;
 };
-struct omap3_idle_statedata omap3_idle_data[OMAP3_NUM_STATES];
 
-struct powerdomain *mpu_pd, *core_pd, *per_pd, *cam_pd;
+static struct omap3_idle_statedata omap3_idle_data[] = {
+	{
+		.mpu_state = PWRDM_POWER_ON,
+		.core_state = PWRDM_POWER_ON,
+	},
+	{
+		.mpu_state = PWRDM_POWER_ON,
+		.core_state = PWRDM_POWER_ON,
+	},
+	{
+		.mpu_state = PWRDM_POWER_RET,
+		.core_state = PWRDM_POWER_ON,
+	},
+	{
+		.mpu_state = PWRDM_POWER_OFF,
+		.core_state = PWRDM_POWER_ON,
+	},
+	{
+		.mpu_state = PWRDM_POWER_RET,
+		.core_state = PWRDM_POWER_RET,
+	},
+	{
+		.mpu_state = PWRDM_POWER_OFF,
+		.core_state = PWRDM_POWER_RET,
+	},
+	{
+		.mpu_state = PWRDM_POWER_OFF,
+		.core_state = PWRDM_POWER_OFF,
+	},
+};
+
+static struct powerdomain *mpu_pd, *core_pd, *per_pd, *cam_pd;
 
 static int _cpuidle_allow_idle(struct powerdomain *pwrdm,
 				struct clockdomain *clkdm)
@@ -91,8 +95,7 @@ static int __omap3_enter_idle(struct cpuidle_device *dev,
 				struct cpuidle_driver *drv,
 				int index)
 {
-	struct omap3_idle_statedata *cx =
-			cpuidle_get_statedata(&dev->states_usage[index]);
+	struct omap3_idle_statedata *cx = &omap3_idle_data[index];
 	u32 mpu_state = cx->mpu_state, core_state = cx->core_state;
 
 	local_fiq_disable();
@@ -169,14 +172,12 @@ static inline int omap3_enter_idle(struct cpuidle_device *dev,
  * if it satisfies the enable_off_mode condition.
  */
 static int next_valid_state(struct cpuidle_device *dev,
-			struct cpuidle_driver *drv,
-				int index)
+			    struct cpuidle_driver *drv, int index)
 {
-	struct cpuidle_state_usage *curr_usage = &dev->states_usage[index];
-	struct cpuidle_state *curr = &drv->states[index];
-	struct omap3_idle_statedata *cx = cpuidle_get_statedata(curr_usage);
+	struct omap3_idle_statedata *cx = &omap3_idle_data[index];
 	u32 mpu_deepest_state = PWRDM_POWER_RET;
 	u32 core_deepest_state = PWRDM_POWER_RET;
+	int idx;
 	int next_index = -1;
 
 	if (enable_off_mode) {
@@ -191,45 +192,29 @@ static int next_valid_state(struct cpuidle_device *dev,
 	}
 
 	/* Check if current state is valid */
-	if ((cx->valid) &&
-	    (cx->mpu_state >= mpu_deepest_state) &&
-	    (cx->core_state >= core_deepest_state)) {
+	if ((cx->mpu_state >= mpu_deepest_state) &&
+	    (cx->core_state >= core_deepest_state))
 		return index;
-	} else {
-		int idx = OMAP3_NUM_STATES - 1;
-
-		/* Reach the current state starting at highest C-state */
-		for (; idx >= 0; idx--) {
-			if (&drv->states[idx] == curr) {
-				next_index = idx;
-				break;
-			}
-		}
-
-		/* Should never hit this condition */
-		WARN_ON(next_index == -1);
 
-		/*
-		 * Drop to next valid state.
-		 * Start search from the next (lower) state.
-		 */
-		idx--;
-		for (; idx >= 0; idx--) {
-			cx = cpuidle_get_statedata(&dev->states_usage[idx]);
-			if ((cx->valid) &&
-			    (cx->mpu_state >= mpu_deepest_state) &&
-			    (cx->core_state >= core_deepest_state)) {
-				next_index = idx;
-				break;
-			}
+	/*
+	 * Drop to next valid state.
+	 * Start search from the next (lower) state.
+	 */
+	for (idx = index - 1; idx >= 0; idx--) {
+		cx =  &omap3_idle_data[idx];
+		if ((cx->mpu_state >= mpu_deepest_state) &&
+		    (cx->core_state >= core_deepest_state)) {
+			next_index = idx;
+			break;
 		}
-		/*
-		 * C1 is always valid.
-		 * So, no need to check for 'next_index == -1' outside
-		 * this loop.
-		 */
 	}
 
+	/*
+	 * C1 is always valid.
+	 * So, no need to check for 'next_index == -1' outside
+	 * this loop.
+	 */
+
 	return next_index;
 }
 
@@ -273,7 +258,7 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev,
 	 * Prevent PER off if CORE is not in retention or off as this
 	 * would disable PER wakeups completely.
 	 */
-	cx = cpuidle_get_statedata(&dev->states_usage[index]);
+	cx = &omap3_idle_data[index];
 	core_next_state = cx->core_state;
 	per_next_state = per_saved_state = pwrdm_read_next_pwrst(per_pd);
 	if ((per_next_state == PWRDM_POWER_OFF) &&
@@ -298,57 +283,71 @@ select_state:
 
 DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev);
 
-void omap3_pm_init_cpuidle(struct cpuidle_params *cpuidle_board_params)
-{
-	int i;
-
-	if (!cpuidle_board_params)
-		return;
-
-	for (i = 0; i < OMAP3_NUM_STATES; i++) {
-		cpuidle_params_table[i].valid =	cpuidle_board_params[i].valid;
-		cpuidle_params_table[i].exit_latency =
-			cpuidle_board_params[i].exit_latency;
-		cpuidle_params_table[i].target_residency =
-			cpuidle_board_params[i].target_residency;
-	}
-	return;
-}
-
 struct cpuidle_driver omap3_idle_driver = {
 	.name = 	"omap3_idle",
 	.owner = 	THIS_MODULE,
+	.states = {
+		{
+			.enter		  = omap3_enter_idle,
+			.exit_latency	  = 2 + 2,
+			.target_residency = 5,
+			.flags		  = CPUIDLE_FLAG_TIME_VALID,
+			.name		  = "C1",
+			.desc		  = "MPU ON + CORE ON",
+		},
+		{
+			.enter		  = omap3_enter_idle_bm,
+			.exit_latency	  = 10 + 10,
+			.target_residency = 30,
+			.flags		  = CPUIDLE_FLAG_TIME_VALID,
+			.name		  = "C2",
+			.desc		  = "MPU ON + CORE ON",
+		},
+		{
+			.enter		  = omap3_enter_idle_bm,
+			.exit_latency	  = 50 + 50,
+			.target_residency = 300,
+			.flags		  = CPUIDLE_FLAG_TIME_VALID,
+			.name		  = "C3",
+			.desc		  = "MPU RET + CORE ON",
+		},
+		{
+			.enter		  = omap3_enter_idle_bm,
+			.exit_latency	  = 1500 + 1800,
+			.target_residency = 4000,
+			.flags		  = CPUIDLE_FLAG_TIME_VALID,
+			.name		  = "C4",
+			.desc		  = "MPU OFF + CORE ON",
+		},
+		{
+			.enter		  = omap3_enter_idle_bm,
+			.exit_latency	  = 2500 + 7500,
+			.target_residency = 12000,
+			.flags		  = CPUIDLE_FLAG_TIME_VALID,
+			.name		  = "C5",
+			.desc		  = "MPU RET + CORE RET",
+		},
+		{
+			.enter		  = omap3_enter_idle_bm,
+			.exit_latency	  = 3000 + 8500,
+			.target_residency = 15000,
+			.flags		  = CPUIDLE_FLAG_TIME_VALID,
+			.name		  = "C6",
+			.desc		  = "MPU OFF + CORE RET",
+		},
+		{
+			.enter		  = omap3_enter_idle_bm,
+			.exit_latency	  = 10000 + 30000,
+			.target_residency = 30000,
+			.flags		  = CPUIDLE_FLAG_TIME_VALID,
+			.name		  = "C7",
+			.desc		  = "MPU OFF + CORE OFF",
+		},
+	},
+	.state_count = ARRAY_SIZE(omap3_idle_data),
+	.safe_state_index = 0,
 };
 
-/* Helper to fill the C-state common data*/
-static inline void _fill_cstate(struct cpuidle_driver *drv,
-					int idx, const char *descr)
-{
-	struct cpuidle_state *state = &drv->states[idx];
-
-	state->exit_latency	= cpuidle_params_table[idx].exit_latency;
-	state->target_residency	= cpuidle_params_table[idx].target_residency;
-	state->flags		= CPUIDLE_FLAG_TIME_VALID;
-	state->enter		= omap3_enter_idle_bm;
-	sprintf(state->name, "C%d", idx + 1);
-	strncpy(state->desc, descr, CPUIDLE_DESC_LEN);
-
-}
-
-/* Helper to register the driver_data */
-static inline struct omap3_idle_statedata *_fill_cstate_usage(
-					struct cpuidle_device *dev,
-					int idx)
-{
-	struct omap3_idle_statedata *cx = &omap3_idle_data[idx];
-	struct cpuidle_state_usage *state_usage = &dev->states_usage[idx];
-
-	cx->valid		= cpuidle_params_table[idx].valid;
-	cpuidle_set_statedata(state_usage, cx);
-
-	return cx;
-}
-
 /**
  * omap3_idle_init - Init routine for OMAP3 idle
  *
@@ -358,77 +357,20 @@ static inline struct omap3_idle_statedata *_fill_cstate_usage(
 int __init omap3_idle_init(void)
 {
 	struct cpuidle_device *dev;
-	struct cpuidle_driver *drv = &omap3_idle_driver;
-	struct omap3_idle_statedata *cx;
 
 	mpu_pd = pwrdm_lookup("mpu_pwrdm");
 	core_pd = pwrdm_lookup("core_pwrdm");
 	per_pd = pwrdm_lookup("per_pwrdm");
 	cam_pd = pwrdm_lookup("cam_pwrdm");
 
+	if (!mpu_pd || !core_pd || !per_pd || !cam_pd)
+		return -ENODEV;
 
-	drv->safe_state_index = -1;
-	dev = &per_cpu(omap3_idle_dev, smp_processor_id());
-
-	/* C1 . MPU WFI + Core active */
-	_fill_cstate(drv, 0, "MPU ON + CORE ON");
-	(&drv->states[0])->enter = omap3_enter_idle;
-	drv->safe_state_index = 0;
-	cx = _fill_cstate_usage(dev, 0);
-	cx->valid = 1;	/* C1 is always valid */
-	cx->mpu_state = PWRDM_POWER_ON;
-	cx->core_state = PWRDM_POWER_ON;
-
-	/* C2 . MPU WFI + Core inactive */
-	_fill_cstate(drv, 1, "MPU ON + CORE ON");
-	cx = _fill_cstate_usage(dev, 1);
-	cx->mpu_state = PWRDM_POWER_ON;
-	cx->core_state = PWRDM_POWER_ON;
-
-	/* C3 . MPU CSWR + Core inactive */
-	_fill_cstate(drv, 2, "MPU RET + CORE ON");
-	cx = _fill_cstate_usage(dev, 2);
-	cx->mpu_state = PWRDM_POWER_RET;
-	cx->core_state = PWRDM_POWER_ON;
-
-	/* C4 . MPU OFF + Core inactive */
-	_fill_cstate(drv, 3, "MPU OFF + CORE ON");
-	cx = _fill_cstate_usage(dev, 3);
-	cx->mpu_state = PWRDM_POWER_OFF;
-	cx->core_state = PWRDM_POWER_ON;
-
-	/* C5 . MPU RET + Core RET */
-	_fill_cstate(drv, 4, "MPU RET + CORE RET");
-	cx = _fill_cstate_usage(dev, 4);
-	cx->mpu_state = PWRDM_POWER_RET;
-	cx->core_state = PWRDM_POWER_RET;
-
-	/* C6 . MPU OFF + Core RET */
-	_fill_cstate(drv, 5, "MPU OFF + CORE RET");
-	cx = _fill_cstate_usage(dev, 5);
-	cx->mpu_state = PWRDM_POWER_OFF;
-	cx->core_state = PWRDM_POWER_RET;
-
-	/* C7 . MPU OFF + Core OFF */
-	_fill_cstate(drv, 6, "MPU OFF + CORE OFF");
-	cx = _fill_cstate_usage(dev, 6);
-	/*
-	 * Erratum i583: implementation for ES rev < Es1.2 on 3630. We cannot
-	 * enable OFF mode in a stable form for previous revisions.
-	 * We disable C7 state as a result.
-	 */
-	if (IS_PM34XX_ERRATUM(PM_SDRC_WAKEUP_ERRATUM_i583)) {
-		cx->valid = 0;
-		pr_warn("%s: core off state C7 disabled due to i583\n",
-			__func__);
-	}
-	cx->mpu_state = PWRDM_POWER_OFF;
-	cx->core_state = PWRDM_POWER_OFF;
-
-	drv->state_count = OMAP3_NUM_STATES;
 	cpuidle_register_driver(&omap3_idle_driver);
 
-	dev->state_count = OMAP3_NUM_STATES;
+	dev = &per_cpu(omap3_idle_dev, smp_processor_id());
+	dev->cpu = 0;
+
 	if (cpuidle_register_device(dev)) {
 		printk(KERN_ERR "%s: CPUidle register device failed\n",
 		       __func__);
diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c
index f386cbe9c889..be1617ca84bd 100644
--- a/arch/arm/mach-omap2/cpuidle44xx.c
+++ b/arch/arm/mach-omap2/cpuidle44xx.c
@@ -24,26 +24,31 @@
 
 #ifdef CONFIG_CPU_IDLE
 
-/* Machine specific information to be recorded in the C-state driver_data */
+/* Machine specific information */
 struct omap4_idle_statedata {
 	u32 cpu_state;
 	u32 mpu_logic_state;
 	u32 mpu_state;
-	u8 valid;
 };
 
-static struct cpuidle_params cpuidle_params_table[] = {
-	/* C1 - CPU0 ON + CPU1 ON + MPU ON */
-	{.exit_latency = 2 + 2 , .target_residency = 5, .valid = 1},
-	/* C2- CPU0 OFF + CPU1 OFF + MPU CSWR */
-	{.exit_latency = 328 + 440 , .target_residency = 960, .valid = 1},
-	/* C3 - CPU0 OFF + CPU1 OFF + MPU OSWR */
-	{.exit_latency = 460 + 518 , .target_residency = 1100, .valid = 1},
+static struct omap4_idle_statedata omap4_idle_data[] = {
+	{
+		.cpu_state = PWRDM_POWER_ON,
+		.mpu_state = PWRDM_POWER_ON,
+		.mpu_logic_state = PWRDM_POWER_RET,
+	},
+	{
+		.cpu_state = PWRDM_POWER_OFF,
+		.mpu_state = PWRDM_POWER_RET,
+		.mpu_logic_state = PWRDM_POWER_RET,
+	},
+	{
+		.cpu_state = PWRDM_POWER_OFF,
+		.mpu_state = PWRDM_POWER_RET,
+		.mpu_logic_state = PWRDM_POWER_OFF,
+	},
 };
 
-#define OMAP4_NUM_STATES ARRAY_SIZE(cpuidle_params_table)
-
-struct omap4_idle_statedata omap4_idle_data[OMAP4_NUM_STATES];
 static struct powerdomain *mpu_pd, *cpu0_pd, *cpu1_pd;
 
 /**
@@ -60,8 +65,7 @@ static int omap4_enter_idle(struct cpuidle_device *dev,
 			struct cpuidle_driver *drv,
 			int index)
 {
-	struct omap4_idle_statedata *cx =
-			cpuidle_get_statedata(&dev->states_usage[index]);
+	struct omap4_idle_statedata *cx = &omap4_idle_data[index];
 	u32 cpu1_state;
 	int cpu_id = smp_processor_id();
 
@@ -78,7 +82,7 @@ static int omap4_enter_idle(struct cpuidle_device *dev,
 	cpu1_state = pwrdm_read_pwrst(cpu1_pd);
 	if (cpu1_state != PWRDM_POWER_OFF) {
 		index = drv->safe_state_index;
-		cx = cpuidle_get_statedata(&dev->states_usage[index]);
+		cx = &omap4_idle_data[index];
 	}
 
 	if (index > 0)
@@ -133,36 +137,39 @@ struct cpuidle_driver omap4_idle_driver = {
 	.name				= "omap4_idle",
 	.owner				= THIS_MODULE,
 	.en_core_tk_irqen		= 1,
+	.states = {
+		{
+			/* C1 - CPU0 ON + CPU1 ON + MPU ON */
+			.exit_latency = 2 + 2,
+			.target_residency = 5,
+			.flags = CPUIDLE_FLAG_TIME_VALID,
+			.enter = omap4_enter_idle,
+			.name = "C1",
+			.desc = "MPUSS ON"
+		},
+		{
+                        /* C2 - CPU0 OFF + CPU1 OFF + MPU CSWR */
+			.exit_latency = 328 + 440,
+			.target_residency = 960,
+			.flags = CPUIDLE_FLAG_TIME_VALID,
+			.enter = omap4_enter_idle,
+			.name = "C2",
+			.desc = "MPUSS CSWR",
+		},
+		{
+			/* C3 - CPU0 OFF + CPU1 OFF + MPU OSWR */
+			.exit_latency = 460 + 518,
+			.target_residency = 1100,
+			.flags = CPUIDLE_FLAG_TIME_VALID,
+			.enter = omap4_enter_idle,
+			.name = "C3",
+			.desc = "MPUSS OSWR",
+		},
+	},
+	.state_count = ARRAY_SIZE(omap4_idle_data),
+	.safe_state_index = 0,
 };
 
-static inline void _fill_cstate(struct cpuidle_driver *drv,
-					int idx, const char *descr)
-{
-	struct cpuidle_state *state = &drv->states[idx];
-
-	state->exit_latency	= cpuidle_params_table[idx].exit_latency;
-	state->target_residency	= cpuidle_params_table[idx].target_residency;
-	state->flags		= CPUIDLE_FLAG_TIME_VALID;
-	state->enter		= omap4_enter_idle;
-	sprintf(state->name, "C%d", idx + 1);
-	strncpy(state->desc, descr, CPUIDLE_DESC_LEN);
-}
-
-static inline struct omap4_idle_statedata *_fill_cstate_usage(
-					struct cpuidle_device *dev,
-					int idx)
-{
-	struct omap4_idle_statedata *cx = &omap4_idle_data[idx];
-	struct cpuidle_state_usage *state_usage = &dev->states_usage[idx];
-
-	cx->valid		= cpuidle_params_table[idx].valid;
-	cpuidle_set_statedata(state_usage, cx);
-
-	return cx;
-}
-
-
-
 /**
  * omap4_idle_init - Init routine for OMAP4 idle
  *
@@ -171,9 +178,7 @@ static inline struct omap4_idle_statedata *_fill_cstate_usage(
  */
 int __init omap4_idle_init(void)
 {
-	struct omap4_idle_statedata *cx;
 	struct cpuidle_device *dev;
-	struct cpuidle_driver *drv = &omap4_idle_driver;
 	unsigned int cpu_id = 0;
 
 	mpu_pd = pwrdm_lookup("mpu_pwrdm");
@@ -182,42 +187,15 @@ int __init omap4_idle_init(void)
 	if ((!mpu_pd) || (!cpu0_pd) || (!cpu1_pd))
 		return -ENODEV;
 
-
-	drv->safe_state_index = -1;
 	dev = &per_cpu(omap4_idle_dev, cpu_id);
 	dev->cpu = cpu_id;
 
-	/* C1 - CPU0 ON + CPU1 ON + MPU ON */
-	_fill_cstate(drv, 0, "MPUSS ON");
-	drv->safe_state_index = 0;
-	cx = _fill_cstate_usage(dev, 0);
-	cx->valid = 1;	/* C1 is always valid */
-	cx->cpu_state = PWRDM_POWER_ON;
-	cx->mpu_state = PWRDM_POWER_ON;
-	cx->mpu_logic_state = PWRDM_POWER_RET;
-
-	/* C2 - CPU0 OFF + CPU1 OFF + MPU CSWR */
-	_fill_cstate(drv, 1, "MPUSS CSWR");
-	cx = _fill_cstate_usage(dev, 1);
-	cx->cpu_state = PWRDM_POWER_OFF;
-	cx->mpu_state = PWRDM_POWER_RET;
-	cx->mpu_logic_state = PWRDM_POWER_RET;
-
-	/* C3 - CPU0 OFF + CPU1 OFF + MPU OSWR */
-	_fill_cstate(drv, 2, "MPUSS OSWR");
-	cx = _fill_cstate_usage(dev, 2);
-	cx->cpu_state = PWRDM_POWER_OFF;
-	cx->mpu_state = PWRDM_POWER_RET;
-	cx->mpu_logic_state = PWRDM_POWER_OFF;
-
-	drv->state_count = OMAP4_NUM_STATES;
 	cpuidle_register_driver(&omap4_idle_driver);
 
-	dev->state_count = OMAP4_NUM_STATES;
 	if (cpuidle_register_device(dev)) {
 		pr_err("%s: CPUidle register device failed\n", __func__);
-			return -EIO;
-		}
+		return -EIO;
+	}
 
 	return 0;
 }
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index e4336035c0ea..7b4b9327e543 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -42,7 +42,6 @@
 
 static int __init omap3_l3_init(void)
 {
-	int l;
 	struct omap_hwmod *oh;
 	struct platform_device *pdev;
 	char oh_name[L3_MODULES_MAX_LEN];
@@ -54,7 +53,7 @@ static int __init omap3_l3_init(void)
 	if (!(cpu_is_omap34xx()))
 		return -ENODEV;
 
-	l = snprintf(oh_name, L3_MODULES_MAX_LEN, "l3_main");
+	snprintf(oh_name, L3_MODULES_MAX_LEN, "l3_main");
 
 	oh = omap_hwmod_lookup(oh_name);
 
@@ -72,7 +71,7 @@ postcore_initcall(omap3_l3_init);
 
 static int __init omap4_l3_init(void)
 {
-	int l, i;
+	int i;
 	struct omap_hwmod *oh[3];
 	struct platform_device *pdev;
 	char oh_name[L3_MODULES_MAX_LEN];
@@ -89,7 +88,7 @@ static int __init omap4_l3_init(void)
 		return -ENODEV;
 
 	for (i = 0; i < L3_MODULES; i++) {
-		l = snprintf(oh_name, L3_MODULES_MAX_LEN, "l3_main_%d", i+1);
+		snprintf(oh_name, L3_MODULES_MAX_LEN, "l3_main_%d", i+1);
 
 		oh[i] = omap_hwmod_lookup(oh_name);
 		if (!(oh[i]))
@@ -355,6 +354,36 @@ static void __init omap_init_dmic(void)
 static inline void omap_init_dmic(void) {}
 #endif
 
+#if defined(CONFIG_SND_OMAP_SOC_OMAP_HDMI) || \
+		defined(CONFIG_SND_OMAP_SOC_OMAP_HDMI_MODULE)
+
+static struct platform_device omap_hdmi_audio = {
+	.name	= "omap-hdmi-audio",
+	.id	= -1,
+};
+
+static void __init omap_init_hdmi_audio(void)
+{
+	struct omap_hwmod *oh;
+	struct platform_device *pdev;
+
+	oh = omap_hwmod_lookup("dss_hdmi");
+	if (!oh) {
+		printk(KERN_ERR "Could not look up dss_hdmi hw_mod\n");
+		return;
+	}
+
+	pdev = omap_device_build("omap-hdmi-audio-dai",
+		-1, oh, NULL, 0, NULL, 0, 0);
+	WARN(IS_ERR(pdev),
+	     "Can't build omap_device for omap-hdmi-audio-dai.\n");
+
+	platform_device_register(&omap_hdmi_audio);
+}
+#else
+static inline void omap_init_hdmi_audio(void) {}
+#endif
+
 #if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE)
 
 #include <plat/mcspi.h>
@@ -616,7 +645,11 @@ static inline void omap242x_mmc_mux(struct omap_mmc_platform_data
 
 void __init omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data)
 {
-	char *name = "mmci-omap";
+	struct platform_device *pdev;
+	struct omap_hwmod *oh;
+	int id = 0;
+	char *oh_name = "msdi1";
+	char *dev_name = "mmci-omap";
 
 	if (!mmc_data[0]) {
 		pr_err("%s fails: Incomplete platform data\n", __func__);
@@ -624,8 +657,17 @@ void __init omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data)
 	}
 
 	omap242x_mmc_mux(mmc_data[0]);
-	omap_mmc_add(name, 0, OMAP2_MMC1_BASE, OMAP2420_MMC_SIZE,
-					INT_24XX_MMC_IRQ, mmc_data[0]);
+
+	oh = omap_hwmod_lookup(oh_name);
+	if (!oh) {
+		pr_err("Could not look up %s\n", oh_name);
+		return;
+	}
+	pdev = omap_device_build(dev_name, id, oh, mmc_data[0],
+				 sizeof(struct omap_mmc_platform_data), NULL, 0, 0);
+	if (IS_ERR(pdev))
+		WARN(1, "Can'd build omap_device for %s:%s.\n",
+					dev_name, oh->name);
 }
 
 #endif
@@ -701,11 +743,15 @@ static int __init omap2_init_devices(void)
 	 * in alphabetical order so they're easier to sort through.
 	 */
 	omap_init_audio();
-	omap_init_mcpdm();
-	omap_init_dmic();
 	omap_init_camera();
+	omap_init_hdmi_audio();
 	omap_init_mbox();
-	omap_init_mcspi();
+	/* If dtb is there, the devices will be created dynamically */
+	if (!of_have_populated_dt()) {
+		omap_init_dmic();
+		omap_init_mcpdm();
+		omap_init_mcspi();
+	}
 	omap_init_pmu();
 	omap_hdq_init();
 	omap_init_sti();
diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c
index b19d8496c16e..ff75abe60af2 100644
--- a/arch/arm/mach-omap2/dma.c
+++ b/arch/arm/mach-omap2/dma.c
@@ -227,10 +227,6 @@ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused)
 
 	dma_stride		= OMAP2_DMA_STRIDE;
 	dma_common_ch_start	= CSDP;
-	if (cpu_is_omap3630() || cpu_is_omap44xx())
-		dma_common_ch_end = CCDN;
-	else
-		dma_common_ch_end = CCFN;
 
 	p = kzalloc(sizeof(struct omap_system_dma_plat_info), GFP_KERNEL);
 	if (!p) {
@@ -277,6 +273,13 @@ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused)
 		dev_err(&pdev->dev, "%s: kzalloc fail\n", __func__);
 		return -ENOMEM;
 	}
+
+	/* Check the capabilities register for descriptor loading feature */
+	if (dma_read(CAPS_0, 0) & DMA_HAS_DESCRIPTOR_CAPS)
+		dma_common_ch_end = CCDN;
+	else
+		dma_common_ch_end = CCFN;
+
 	return 0;
 }
 
diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c
index fc56745676fa..f0f10beeffe8 100644
--- a/arch/arm/mach-omap2/dpll3xxx.c
+++ b/arch/arm/mach-omap2/dpll3xxx.c
@@ -142,7 +142,8 @@ static int _omap3_noncore_dpll_lock(struct clk *clk)
 
 	ai = omap3_dpll_autoidle_read(clk);
 
-	omap3_dpll_deny_idle(clk);
+	if (ai)
+		omap3_dpll_deny_idle(clk);
 
 	_omap3_dpll_write_clken(clk, DPLL_LOCKED);
 
@@ -186,8 +187,6 @@ static int _omap3_noncore_dpll_bypass(struct clk *clk)
 
 	if (ai)
 		omap3_dpll_allow_idle(clk);
-	else
-		omap3_dpll_deny_idle(clk);
 
 	return r;
 }
@@ -216,8 +215,6 @@ static int _omap3_noncore_dpll_stop(struct clk *clk)
 
 	if (ai)
 		omap3_dpll_allow_idle(clk);
-	else
-		omap3_dpll_deny_idle(clk);
 
 	return 0;
 }
@@ -519,6 +516,9 @@ u32 omap3_dpll_autoidle_read(struct clk *clk)
 
 	dd = clk->dpll_data;
 
+	if (!dd->autoidle_reg)
+		return -EINVAL;
+
 	v = __raw_readl(dd->autoidle_reg);
 	v &= dd->autoidle_mask;
 	v >>= __ffs(dd->autoidle_mask);
@@ -545,6 +545,12 @@ void omap3_dpll_allow_idle(struct clk *clk)
 
 	dd = clk->dpll_data;
 
+	if (!dd->autoidle_reg) {
+		pr_debug("clock: DPLL %s: autoidle not supported\n",
+			clk->name);
+		return;
+	}
+
 	/*
 	 * REVISIT: CORE DPLL can optionally enter low-power bypass
 	 * by writing 0x5 instead of 0x1.  Add some mechanism to
@@ -554,6 +560,7 @@ void omap3_dpll_allow_idle(struct clk *clk)
 	v &= ~dd->autoidle_mask;
 	v |= DPLL_AUTOIDLE_LOW_POWER_STOP << __ffs(dd->autoidle_mask);
 	__raw_writel(v, dd->autoidle_reg);
+
 }
 
 /**
@@ -572,6 +579,12 @@ void omap3_dpll_deny_idle(struct clk *clk)
 
 	dd = clk->dpll_data;
 
+	if (!dd->autoidle_reg) {
+		pr_debug("clock: DPLL %s: autoidle not supported\n",
+			clk->name);
+		return;
+	}
+
 	v = __raw_readl(dd->autoidle_reg);
 	v &= ~dd->autoidle_mask;
 	v |= DPLL_AUTOIDLE_DISABLE << __ffs(dd->autoidle_mask);
diff --git a/arch/arm/mach-omap2/dsp.c b/arch/arm/mach-omap2/dsp.c
index 74f18f2952df..845309f146fe 100644
--- a/arch/arm/mach-omap2/dsp.c
+++ b/arch/arm/mach-omap2/dsp.c
@@ -28,8 +28,6 @@
 
 #include <plat/dsp.h>
 
-extern phys_addr_t omap_dsp_get_mempool_base(void);
-
 static struct platform_device *omap_dsp_pdev;
 
 static struct omap_dsp_platform_data omap_dsp_pdata __initdata = {
@@ -47,6 +45,31 @@ static struct omap_dsp_platform_data omap_dsp_pdata __initdata = {
 	.dsp_cm_rmw_bits = omap2_cm_rmw_mod_reg_bits,
 };
 
+static phys_addr_t omap_dsp_phys_mempool_base;
+
+void __init omap_dsp_reserve_sdram_memblock(void)
+{
+	phys_addr_t size = CONFIG_TIDSPBRIDGE_MEMPOOL_SIZE;
+	phys_addr_t paddr;
+
+	if (!size)
+		return;
+
+	paddr = arm_memblock_steal(size, SZ_1M);
+	if (!paddr) {
+		pr_err("%s: failed to reserve %llx bytes\n",
+				__func__, (unsigned long long)size);
+		return;
+	}
+
+	omap_dsp_phys_mempool_base = paddr;
+}
+
+static phys_addr_t omap_dsp_get_mempool_base(void)
+{
+	return omap_dsp_phys_mempool_base;
+}
+
 static int __init omap_dsp_init(void)
 {
 	struct platform_device *pdev;
@@ -57,8 +80,9 @@ static int __init omap_dsp_init(void)
 
 	if (pdata->phys_mempool_base) {
 		pdata->phys_mempool_size = CONFIG_TIDSPBRIDGE_MEMPOOL_SIZE;
-		pr_info("%s: %x bytes @ %x\n", __func__,
-			pdata->phys_mempool_size, pdata->phys_mempool_base);
+		pr_info("%s: %llx bytes @ %llx\n", __func__,
+			(unsigned long long)pdata->phys_mempool_size,
+			(unsigned long long)pdata->phys_mempool_base);
 	}
 
 	pdev = platform_device_alloc("omap-dsp", -1);
diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c
index 2f994e5194e8..9ad7d489b0de 100644
--- a/arch/arm/mach-omap2/gpio.c
+++ b/arch/arm/mach-omap2/gpio.c
@@ -20,6 +20,7 @@
 #include <linux/err.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
+#include <linux/of.h>
 
 #include <plat/omap_hwmod.h>
 #include <plat/omap_device.h>
@@ -55,10 +56,9 @@ static int __init omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
 	dev_attr = (struct omap_gpio_dev_attr *)oh->dev_attr;
 	pdata->bank_width = dev_attr->bank_width;
 	pdata->dbck_flag = dev_attr->dbck_flag;
-	pdata->virtual_irq_start = IH_GPIO_BASE + 32 * (id - 1);
 	pdata->get_context_loss_count = omap_pm_get_dev_context_loss_count;
 	pdata->regs = kzalloc(sizeof(struct omap_gpio_reg_offs), GFP_KERNEL);
-	if (!pdata) {
+	if (!pdata->regs) {
 		pr_err("gpio%d: Memory allocation failed\n", id);
 		return -ENOMEM;
 	}
@@ -102,6 +102,8 @@ static int __init omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
 		pdata->regs->dataout = OMAP4_GPIO_DATAOUT;
 		pdata->regs->set_dataout = OMAP4_GPIO_SETDATAOUT;
 		pdata->regs->clr_dataout = OMAP4_GPIO_CLEARDATAOUT;
+		pdata->regs->irqstatus_raw0 = OMAP4_GPIO_IRQSTATUSRAW0;
+		pdata->regs->irqstatus_raw1 = OMAP4_GPIO_IRQSTATUSRAW1;
 		pdata->regs->irqstatus = OMAP4_GPIO_IRQSTATUS0;
 		pdata->regs->irqstatus2 = OMAP4_GPIO_IRQSTATUS1;
 		pdata->regs->irqenable = OMAP4_GPIO_IRQSTATUSSET0;
@@ -146,7 +148,10 @@ static int __init omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
  */
 static int __init omap2_gpio_init(void)
 {
-	return omap_hwmod_for_each_by_class("gpio", omap2_gpio_dev_init,
-						NULL);
+	/* If dtb is there, the devices will be created dynamically */
+	if (of_have_populated_dt())
+		return -ENODEV;
+
+	return omap_hwmod_for_each_by_class("gpio", omap2_gpio_dev_init, NULL);
 }
 postcore_initcall(omap2_gpio_init);
diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c
index 385b3e02c4a6..a0fa9bb2bda5 100644
--- a/arch/arm/mach-omap2/gpmc-onenand.c
+++ b/arch/arm/mach-omap2/gpmc-onenand.c
@@ -176,7 +176,7 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
 	const int t_wpl  = 40;
 	const int t_wph  = 30;
 	int min_gpmc_clk_period, t_ces, t_avds, t_avdh, t_ach, t_aavdh, t_rdyo;
-	int tick_ns, div, fclk_offset_ns, fclk_offset, gpmc_clk_ns, latency;
+	int div, fclk_offset_ns, fclk_offset, gpmc_clk_ns, latency;
 	int first_time = 0, hf = 0, vhf = 0, sync_read = 0, sync_write = 0;
 	int err, ticks_cez;
 	int cs = cfg->cs, freq = *freq_ptr;
@@ -240,7 +240,6 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
 		break;
 	}
 
-	tick_ns = gpmc_ticks_to_ns(1);
 	div = gpmc_cs_calc_divider(cs, min_gpmc_clk_period);
 	gpmc_clk_ns = gpmc_ticks_to_ns(div);
 	if (gpmc_clk_ns < 15) /* >66Mhz */
diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.c b/arch/arm/mach-omap2/gpmc-smsc911x.c
index 5e5880d6d099..b6c77be3e8f7 100644
--- a/arch/arm/mach-omap2/gpmc-smsc911x.c
+++ b/arch/arm/mach-omap2/gpmc-smsc911x.c
@@ -19,15 +19,11 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/smsc911x.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
 
 #include <plat/board.h>
 #include <plat/gpmc.h>
 #include <plat/gpmc-smsc911x.h>
 
-static struct omap_smsc911x_platform_data *gpmc_cfg;
-
 static struct resource gpmc_smsc911x_resources[] = {
 	[0] = {
 		.flags		= IORESOURCE_MEM,
@@ -41,51 +37,6 @@ static struct smsc911x_platform_config gpmc_smsc911x_config = {
 	.phy_interface	= PHY_INTERFACE_MODE_MII,
 	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
 	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
-	.flags		= SMSC911X_USE_16BIT,
-};
-
-static struct regulator_consumer_supply gpmc_smsc911x_supply[] = {
-	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
-	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
-};
-
-/* Generic regulator definition to satisfy smsc911x */
-static struct regulator_init_data gpmc_smsc911x_reg_init_data = {
-	.constraints = {
-		.min_uV			= 3300000,
-		.max_uV			= 3300000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(gpmc_smsc911x_supply),
-	.consumer_supplies	= gpmc_smsc911x_supply,
-};
-
-static struct fixed_voltage_config gpmc_smsc911x_fixed_reg_data = {
-	.supply_name		= "gpmc_smsc911x",
-	.microvolts		= 3300000,
-	.gpio			= -EINVAL,
-	.startup_delay		= 0,
-	.enable_high		= 0,
-	.enabled_at_boot	= 1,
-	.init_data		= &gpmc_smsc911x_reg_init_data,
-};
-
-/*
- * Platform device id of 42 is a temporary fix to avoid conflicts
- * with other reg-fixed-voltage devices. The real fix should
- * involve the driver core providing a way of dynamically
- * assigning a unique id on registration for platform devices
- * in the same name space.
- */
-static struct platform_device gpmc_smsc911x_regulator = {
-	.name		= "reg-fixed-voltage",
-	.id		= 42,
-	.dev = {
-		.platform_data	= &gpmc_smsc911x_fixed_reg_data,
-	},
 };
 
 /*
@@ -93,23 +44,12 @@ static struct platform_device gpmc_smsc911x_regulator = {
  * assume that pin multiplexing is done in the board-*.c file,
  * or in the bootloader.
  */
-void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data)
+void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *gpmc_cfg)
 {
 	struct platform_device *pdev;
 	unsigned long cs_mem_base;
 	int ret;
 
-	gpmc_cfg = board_data;
-
-	if (!gpmc_cfg->id) {
-		ret = platform_device_register(&gpmc_smsc911x_regulator);
-		if (ret < 0) {
-			pr_err("Unable to register smsc911x regulators: %d\n",
-			       ret);
-			return;
-		}
-	}
-
 	if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) {
 		pr_err("Failed to request GPMC mem region\n");
 		return;
@@ -139,8 +79,7 @@ void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data)
 		gpio_set_value(gpmc_cfg->gpio_reset, 1);
 	}
 
-	if (gpmc_cfg->flags)
-		gpmc_smsc911x_config.flags = gpmc_cfg->flags;
+	gpmc_smsc911x_config.flags = gpmc_cfg->flags ? : SMSC911X_USE_16BIT;
 
 	pdev = platform_device_register_resndata(NULL, "smsc911x", gpmc_cfg->id,
 		 gpmc_smsc911x_resources, ARRAY_SIZE(gpmc_smsc911x_resources),
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 00d510858e28..46b09dae770e 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -50,6 +50,19 @@
 #define GPMC_ECC_SIZE_CONFIG	0x1fc
 #define GPMC_ECC1_RESULT        0x200
 
+/* GPMC ECC control settings */
+#define GPMC_ECC_CTRL_ECCCLEAR		0x100
+#define GPMC_ECC_CTRL_ECCDISABLE	0x000
+#define GPMC_ECC_CTRL_ECCREG1		0x001
+#define GPMC_ECC_CTRL_ECCREG2		0x002
+#define GPMC_ECC_CTRL_ECCREG3		0x003
+#define GPMC_ECC_CTRL_ECCREG4		0x004
+#define GPMC_ECC_CTRL_ECCREG5		0x005
+#define GPMC_ECC_CTRL_ECCREG6		0x006
+#define GPMC_ECC_CTRL_ECCREG7		0x007
+#define GPMC_ECC_CTRL_ECCREG8		0x008
+#define GPMC_ECC_CTRL_ECCREG9		0x009
+
 #define GPMC_CS0_OFFSET		0x60
 #define GPMC_CS_SIZE		0x30
 
@@ -755,8 +768,7 @@ static int __init gpmc_init(void)
 		irq++;
 	}
 
-	ret = request_irq(gpmc_irq,
-			gpmc_handle_irq, IRQF_SHARED, "gpmc", gpmc_base);
+	ret = request_irq(gpmc_irq, gpmc_handle_irq, IRQF_SHARED, "gpmc", NULL);
 	if (ret)
 		pr_err("gpmc: irq-%d could not claim: err %d\n",
 						gpmc_irq, ret);
@@ -861,8 +873,9 @@ int gpmc_enable_hwecc(int cs, int mode, int dev_width, int ecc_size)
 	gpmc_ecc_used = cs;
 
 	/* clear ecc and enable bits */
-	val = ((0x00000001<<8) | 0x00000001);
-	gpmc_write_reg(GPMC_ECC_CONTROL, val);
+	gpmc_write_reg(GPMC_ECC_CONTROL,
+			GPMC_ECC_CTRL_ECCCLEAR |
+			GPMC_ECC_CTRL_ECCREG1);
 
 	/* program ecc and result sizes */
 	val = ((((ecc_size >> 1) - 1) << 22) | (0x0000000F));
@@ -870,13 +883,15 @@ int gpmc_enable_hwecc(int cs, int mode, int dev_width, int ecc_size)
 
 	switch (mode) {
 	case GPMC_ECC_READ:
-		gpmc_write_reg(GPMC_ECC_CONTROL, 0x101);
+	case GPMC_ECC_WRITE:
+		gpmc_write_reg(GPMC_ECC_CONTROL,
+				GPMC_ECC_CTRL_ECCCLEAR |
+				GPMC_ECC_CTRL_ECCREG1);
 		break;
 	case GPMC_ECC_READSYN:
-		 gpmc_write_reg(GPMC_ECC_CONTROL, 0x100);
-		break;
-	case GPMC_ECC_WRITE:
-		gpmc_write_reg(GPMC_ECC_CONTROL, 0x101);
+		gpmc_write_reg(GPMC_ECC_CONTROL,
+				GPMC_ECC_CTRL_ECCCLEAR |
+				GPMC_ECC_CTRL_ECCDISABLE);
 		break;
 	default:
 		printk(KERN_INFO "Error: Unrecognized Mode[%d]!\n", mode);
diff --git a/arch/arm/mach-omap2/hdq1w.c b/arch/arm/mach-omap2/hdq1w.c
new file mode 100644
index 000000000000..297ebe03f09c
--- /dev/null
+++ b/arch/arm/mach-omap2/hdq1w.c
@@ -0,0 +1,72 @@
+/*
+ * IP block integration code for the HDQ1W/1-wire IP block
+ *
+ * Copyright (C) 2012 Texas Instruments, Inc.
+ * Paul Walmsley
+ *
+ * Based on the I2C reset code in arch/arm/mach-omap2/i2c.c by
+ *     Avinash.H.M <avinashhm@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <plat/omap_hwmod.h>
+#include <plat/hdq1w.h>
+
+#include "common.h"
+
+/* Maximum microseconds to wait for OMAP module to softreset */
+#define MAX_MODULE_SOFTRESET_WAIT	10000
+
+/**
+ * omap_hdq1w_reset - reset the OMAP HDQ1W module
+ * @oh: struct omap_hwmod *
+ *
+ * OCP soft reset the HDQ1W IP block.  Section 20.6.1.4 "HDQ1W/1-Wire
+ * Software Reset" of the OMAP34xx Technical Reference Manual Revision
+ * ZR (SWPU223R) does not include the rather important fact that, for
+ * the reset to succeed, the HDQ1W module's internal clock gate must be
+ * programmed to allow the clock to propagate to the rest of the
+ * module.  In this sense, it's rather similar to the I2C custom reset
+ * function.  Returns 0.
+ */
+int omap_hdq1w_reset(struct omap_hwmod *oh)
+{
+	u32 v;
+	int c = 0;
+
+	/* Write to the SOFTRESET bit */
+	omap_hwmod_softreset(oh);
+
+	/* Enable the module's internal clocks */
+	v = omap_hwmod_read(oh, HDQ_CTRL_STATUS_OFFSET);
+	v |= 1 << HDQ_CTRL_STATUS_CLOCKENABLE_SHIFT;
+	omap_hwmod_write(v, oh, HDQ_CTRL_STATUS_OFFSET);
+
+	/* Poll on RESETDONE bit */
+	omap_test_timeout((omap_hwmod_read(oh,
+					   oh->class->sysc->syss_offs)
+			   & SYSS_RESETDONE_MASK),
+			  MAX_MODULE_SOFTRESET_WAIT, c);
+
+	if (c == MAX_MODULE_SOFTRESET_WAIT)
+		pr_warning("%s: %s: softreset failed (waited %d usec)\n",
+			   __func__, oh->name, MAX_MODULE_SOFTRESET_WAIT);
+	else
+		pr_debug("%s: %s: softreset in %d usec\n", __func__,
+			 oh->name, c);
+
+	return 0;
+}
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index 100db6217f39..be697d4e0843 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -355,7 +355,7 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
 	 *
 	 * temporary HACK: ocr_mask instead of fixed supply
 	 */
-	if (cpu_is_omap3505() || cpu_is_omap3517())
+	if (soc_is_am35xx())
 		mmc->slots[0].ocr_mask = MMC_VDD_165_195 |
 					 MMC_VDD_26_27 |
 					 MMC_VDD_27_28 |
@@ -365,7 +365,7 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
 	else
 		mmc->slots[0].ocr_mask = c->ocr_mask;
 
-	if (!cpu_is_omap3517() && !cpu_is_omap3505())
+	if (!soc_is_am35xx())
 		mmc->slots[0].features |= HSMMC_HAS_PBIAS;
 
 	if (cpu_is_omap44xx() && (omap_rev() > OMAP4430_REV_ES1_0))
@@ -388,7 +388,7 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
 			}
 		}
 
-		if (cpu_is_omap3517() || cpu_is_omap3505())
+		if (soc_is_am35xx())
 			mmc->slots[0].set_power = nop_mmc_set_power;
 
 		/* OMAP3630 HSMMC1 supports only 4-bit */
@@ -400,7 +400,7 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
 		}
 		break;
 	case 2:
-		if (cpu_is_omap3517() || cpu_is_omap3505())
+		if (soc_is_am35xx())
 			mmc->slots[0].set_power = am35x_hsmmc2_set_power;
 
 		if (c->ext_clock)
@@ -506,6 +506,13 @@ static void __init omap_hsmmc_init_one(struct omap2_hsmmc_info *hsmmcinfo,
 	if (oh->dev_attr != NULL) {
 		mmc_dev_attr = oh->dev_attr;
 		mmc_data->controller_flags = mmc_dev_attr->flags;
+		/*
+		 * erratum 2.1.1.128 doesn't apply if board has
+		 * a transceiver is attached
+		 */
+		if (hsmmcinfo->transceiver)
+			mmc_data->controller_flags &=
+				~OMAP_HSMMC_BROKEN_MULTIBLOCK_READ;
 	}
 
 	pdev = platform_device_alloc(name, ctrl_nr - 1);
diff --git a/arch/arm/mach-omap2/hwspinlock.c b/arch/arm/mach-omap2/hwspinlock.c
index 454dfce125ca..8763c8520dc2 100644
--- a/arch/arm/mach-omap2/hwspinlock.c
+++ b/arch/arm/mach-omap2/hwspinlock.c
@@ -28,7 +28,7 @@ static struct hwspinlock_pdata omap_hwspinlock_pdata __initdata = {
 	.base_id = 0,
 };
 
-int __init hwspinlocks_init(void)
+static int __init hwspinlocks_init(void)
 {
 	int retval = 0;
 	struct omap_hwmod *oh;
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 0e79b7bc6aa4..0389b3264abe 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -185,8 +185,7 @@ static void __init omap3_cpuinfo(void)
 	 */
 	if (cpu_is_omap3630()) {
 		cpu_name = "OMAP3630";
-	} else if (cpu_is_omap3517()) {
-		/* AM35xx devices */
+	} else if (soc_is_am35xx()) {
 		cpu_name = (omap3_has_sgx()) ? "AM3517" : "AM3505";
 	} else if (cpu_is_ti816x()) {
 		cpu_name = "TI816X";
@@ -352,13 +351,13 @@ void __init omap3xxx_check_revision(void)
 		 */
 		switch (rev) {
 		case 0:
-			omap_revision = OMAP3517_REV_ES1_0;
+			omap_revision = AM35XX_REV_ES1_0;
 			cpu_rev = "1.0";
 			break;
 		case 1:
 		/* FALLTHROUGH */
 		default:
-			omap_revision = OMAP3517_REV_ES1_1;
+			omap_revision = AM35XX_REV_ES1_1;
 			cpu_rev = "1.1";
 		}
 		break;
@@ -478,9 +477,12 @@ void __init omap4xxx_check_revision(void)
 	case 0xb94e:
 		switch (rev) {
 		case 0:
-		default:
 			omap_revision = OMAP4460_REV_ES1_0;
 			break;
+		case 2:
+		default:
+			omap_revision = OMAP4460_REV_ES1_1;
+			break;
 		}
 		break;
 	case 0xb975:
diff --git a/arch/arm/mach-omap2/include/mach/barriers.h b/arch/arm/mach-omap2/include/mach/barriers.h
index 4fa72c7cc7cd..1c582a8592b9 100644
--- a/arch/arm/mach-omap2/include/mach/barriers.h
+++ b/arch/arm/mach-omap2/include/mach/barriers.h
@@ -22,6 +22,8 @@
 #ifndef __MACH_BARRIERS_H
 #define __MACH_BARRIERS_H
 
+#include <asm/outercache.h>
+
 extern void omap_bus_sync(void);
 
 #define rmb()		dsb()
diff --git a/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h b/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h
index 1e2d3322f33e..c88420de1151 100644
--- a/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h
+++ b/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h
@@ -941,10 +941,10 @@
 #define OMAP4_DSI2_LANEENABLE_MASK				(0x7 << 29)
 #define OMAP4_DSI1_LANEENABLE_SHIFT				24
 #define OMAP4_DSI1_LANEENABLE_MASK				(0x1f << 24)
-#define OMAP4_DSI2_PIPD_SHIFT					19
-#define OMAP4_DSI2_PIPD_MASK					(0x1f << 19)
-#define OMAP4_DSI1_PIPD_SHIFT					14
-#define OMAP4_DSI1_PIPD_MASK					(0x1f << 14)
+#define OMAP4_DSI1_PIPD_SHIFT					19
+#define OMAP4_DSI1_PIPD_MASK					(0x1f << 19)
+#define OMAP4_DSI2_PIPD_SHIFT					14
+#define OMAP4_DSI2_PIPD_MASK					(0x1f << 14)
 
 /* CONTROL_MCBSPLP */
 #define OMAP4_ALBCTRLRX_FSX_SHIFT				31
diff --git a/arch/arm/mach-omap2/include/mach/omap-wakeupgen.h b/arch/arm/mach-omap2/include/mach/omap-wakeupgen.h
index d79321b0f2a2..548de90b58c2 100644
--- a/arch/arm/mach-omap2/include/mach/omap-wakeupgen.h
+++ b/arch/arm/mach-omap2/include/mach/omap-wakeupgen.h
@@ -16,18 +16,10 @@
 #define OMAP_WKG_ENB_B_0			0x14
 #define OMAP_WKG_ENB_C_0			0x18
 #define OMAP_WKG_ENB_D_0			0x1c
-#define OMAP_WKG_ENB_SECURE_A_0			0x20
-#define OMAP_WKG_ENB_SECURE_B_0			0x24
-#define OMAP_WKG_ENB_SECURE_C_0			0x28
-#define OMAP_WKG_ENB_SECURE_D_0			0x2c
 #define OMAP_WKG_ENB_A_1			0x410
 #define OMAP_WKG_ENB_B_1			0x414
 #define OMAP_WKG_ENB_C_1			0x418
 #define OMAP_WKG_ENB_D_1			0x41c
-#define OMAP_WKG_ENB_SECURE_A_1			0x420
-#define OMAP_WKG_ENB_SECURE_B_1			0x424
-#define OMAP_WKG_ENB_SECURE_C_1			0x428
-#define OMAP_WKG_ENB_SECURE_D_1			0x42c
 #define OMAP_AUX_CORE_BOOT_0			0x800
 #define OMAP_AUX_CORE_BOOT_1			0x804
 #define OMAP_PTMSYNCREQ_MASK			0xc00
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 065bd768987c..8d014ba04abc 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -31,6 +31,7 @@
 #include <plat/omap-pm.h>
 #include <plat/omap_hwmod.h>
 #include <plat/multi.h>
+#include <plat/dma.h>
 
 #include "iomap.h"
 #include "voltage.h"
@@ -172,7 +173,7 @@ static struct map_desc omap34xx_io_desc[] __initdata = {
 };
 #endif
 
-#ifdef CONFIG_SOC_OMAPTI81XX
+#ifdef CONFIG_SOC_TI81XX
 static struct map_desc omapti81xx_io_desc[] __initdata = {
 	{
 		.virtual	= L4_34XX_VIRT,
@@ -183,7 +184,7 @@ static struct map_desc omapti81xx_io_desc[] __initdata = {
 };
 #endif
 
-#ifdef CONFIG_SOC_OMAPAM33XX
+#ifdef CONFIG_SOC_AM33XX
 static struct map_desc omapam33xx_io_desc[] __initdata = {
 	{
 		.virtual	= L4_34XX_VIRT,
@@ -215,41 +216,11 @@ static struct map_desc omap44xx_io_desc[] __initdata = {
 		.type		= MT_DEVICE,
 	},
 	{
-		.virtual	= OMAP44XX_GPMC_VIRT,
-		.pfn		= __phys_to_pfn(OMAP44XX_GPMC_PHYS),
-		.length		= OMAP44XX_GPMC_SIZE,
-		.type		= MT_DEVICE,
-	},
-	{
-		.virtual	= OMAP44XX_EMIF1_VIRT,
-		.pfn		= __phys_to_pfn(OMAP44XX_EMIF1_PHYS),
-		.length		= OMAP44XX_EMIF1_SIZE,
-		.type		= MT_DEVICE,
-	},
-	{
-		.virtual	= OMAP44XX_EMIF2_VIRT,
-		.pfn		= __phys_to_pfn(OMAP44XX_EMIF2_PHYS),
-		.length		= OMAP44XX_EMIF2_SIZE,
-		.type		= MT_DEVICE,
-	},
-	{
-		.virtual	= OMAP44XX_DMM_VIRT,
-		.pfn		= __phys_to_pfn(OMAP44XX_DMM_PHYS),
-		.length		= OMAP44XX_DMM_SIZE,
-		.type		= MT_DEVICE,
-	},
-	{
 		.virtual	= L4_PER_44XX_VIRT,
 		.pfn		= __phys_to_pfn(L4_PER_44XX_PHYS),
 		.length		= L4_PER_44XX_SIZE,
 		.type		= MT_DEVICE,
 	},
-	{
-		.virtual	= L4_EMU_44XX_VIRT,
-		.pfn		= __phys_to_pfn(L4_EMU_44XX_PHYS),
-		.length		= L4_EMU_44XX_SIZE,
-		.type		= MT_DEVICE,
-	},
 #ifdef CONFIG_OMAP4_ERRATA_I688
 	{
 		.virtual	= OMAP4_SRAM_VA,
@@ -285,14 +256,14 @@ void __init omap34xx_map_common_io(void)
 }
 #endif
 
-#ifdef CONFIG_SOC_OMAPTI81XX
+#ifdef CONFIG_SOC_TI81XX
 void __init omapti81xx_map_common_io(void)
 {
 	iotable_init(omapti81xx_io_desc, ARRAY_SIZE(omapti81xx_io_desc));
 }
 #endif
 
-#ifdef CONFIG_SOC_OMAPAM33XX
+#ifdef CONFIG_SOC_AM33XX
 void __init omapam33xx_map_common_io(void)
 {
 	iotable_init(omapam33xx_io_desc, ARRAY_SIZE(omapam33xx_io_desc));
@@ -363,24 +334,6 @@ static void __init omap_hwmod_init_postsetup(void)
 #endif
 	omap_hwmod_for_each(_set_hwmod_postsetup_state, &postsetup_state);
 
-	/*
-	 * Set the default postsetup state for unusual modules (like
-	 * MPU WDT).
-	 *
-	 * The postsetup_state is not actually used until
-	 * omap_hwmod_late_init(), so boards that desire full watchdog
-	 * coverage of kernel initialization can reprogram the
-	 * postsetup_state between the calls to
-	 * omap2_init_common_infra() and omap_sdrc_init().
-	 *
-	 * XXX ideally we could detect whether the MPU WDT was currently
-	 * enabled here and make this conditional
-	 */
-	postsetup_state = _HWMOD_STATE_DISABLED;
-	omap_hwmod_for_each_by_class("wd_timer",
-				     _set_hwmod_postsetup_state,
-				     &postsetup_state);
-
 	omap_pm_if_early_init();
 }
 
@@ -397,6 +350,13 @@ void __init omap2420_init_early(void)
 	omap_hwmod_init_postsetup();
 	omap2420_clk_init();
 }
+
+void __init omap2420_init_late(void)
+{
+	omap_mux_late_init();
+	omap2_common_pm_late_init();
+	omap2_pm_init();
+}
 #endif
 
 #ifdef CONFIG_SOC_OMAP2430
@@ -412,6 +372,13 @@ void __init omap2430_init_early(void)
 	omap_hwmod_init_postsetup();
 	omap2430_clk_init();
 }
+
+void __init omap2430_init_late(void)
+{
+	omap_mux_late_init();
+	omap2_common_pm_late_init();
+	omap2_pm_init();
+}
 #endif
 
 /*
@@ -466,6 +433,48 @@ void __init ti81xx_init_early(void)
 	omap_hwmod_init_postsetup();
 	omap3xxx_clk_init();
 }
+
+void __init omap3_init_late(void)
+{
+	omap_mux_late_init();
+	omap2_common_pm_late_init();
+	omap3_pm_init();
+}
+
+void __init omap3430_init_late(void)
+{
+	omap_mux_late_init();
+	omap2_common_pm_late_init();
+	omap3_pm_init();
+}
+
+void __init omap35xx_init_late(void)
+{
+	omap_mux_late_init();
+	omap2_common_pm_late_init();
+	omap3_pm_init();
+}
+
+void __init omap3630_init_late(void)
+{
+	omap_mux_late_init();
+	omap2_common_pm_late_init();
+	omap3_pm_init();
+}
+
+void __init am35xx_init_late(void)
+{
+	omap_mux_late_init();
+	omap2_common_pm_late_init();
+	omap3_pm_init();
+}
+
+void __init ti81xx_init_late(void)
+{
+	omap_mux_late_init();
+	omap2_common_pm_late_init();
+	omap3_pm_init();
+}
 #endif
 
 #ifdef CONFIG_ARCH_OMAP4
@@ -482,6 +491,13 @@ void __init omap4430_init_early(void)
 	omap_hwmod_init_postsetup();
 	omap4xxx_clk_init();
 }
+
+void __init omap4430_init_late(void)
+{
+	omap_mux_late_init();
+	omap2_common_pm_late_init();
+	omap4_pm_init();
+}
 #endif
 
 void __init omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
diff --git a/arch/arm/mach-omap2/iomap.h b/arch/arm/mach-omap2/iomap.h
index 0812b154f5b5..80b88921faba 100644
--- a/arch/arm/mach-omap2/iomap.h
+++ b/arch/arm/mach-omap2/iomap.h
@@ -37,9 +37,6 @@
 #define OMAP4_L3_PER_IO_OFFSET	0xb1100000
 #define OMAP4_L3_PER_IO_ADDRESS(pa)	IOMEM((pa) + OMAP4_L3_PER_IO_OFFSET)
 
-#define OMAP4_GPMC_IO_OFFSET		0xa9000000
-#define OMAP4_GPMC_IO_ADDRESS(pa)	IOMEM((pa) + OMAP4_GPMC_IO_OFFSET)
-
 #define OMAP2_EMU_IO_OFFSET		0xaa800000	/* Emulation */
 #define OMAP2_EMU_IO_ADDRESS(pa)	IOMEM((pa) + OMAP2_EMU_IO_OFFSET)
 
@@ -170,28 +167,3 @@
 #define L4_ABE_44XX_VIRT	(L4_ABE_44XX_PHYS + OMAP2_L4_IO_OFFSET)
 #define L4_ABE_44XX_SIZE	SZ_1M
 
-#define L4_EMU_44XX_PHYS	L4_EMU_44XX_BASE
-						/* 0x54000000 --> 0xfe800000 */
-#define L4_EMU_44XX_VIRT	(L4_EMU_44XX_PHYS + OMAP2_EMU_IO_OFFSET)
-#define L4_EMU_44XX_SIZE	SZ_8M
-
-#define OMAP44XX_GPMC_PHYS	OMAP44XX_GPMC_BASE
-						/* 0x50000000 --> 0xf9000000 */
-#define OMAP44XX_GPMC_VIRT	(OMAP44XX_GPMC_PHYS + OMAP4_GPMC_IO_OFFSET)
-#define OMAP44XX_GPMC_SIZE	SZ_1M
-
-
-#define OMAP44XX_EMIF1_PHYS	OMAP44XX_EMIF1_BASE
-						/* 0x4c000000 --> 0xfd100000 */
-#define OMAP44XX_EMIF1_VIRT	(OMAP44XX_EMIF1_PHYS + OMAP4_L3_PER_IO_OFFSET)
-#define OMAP44XX_EMIF1_SIZE	SZ_1M
-
-#define OMAP44XX_EMIF2_PHYS	OMAP44XX_EMIF2_BASE
-						/* 0x4d000000 --> 0xfd200000 */
-#define OMAP44XX_EMIF2_SIZE	SZ_1M
-#define OMAP44XX_EMIF2_VIRT	(OMAP44XX_EMIF1_VIRT + OMAP44XX_EMIF1_SIZE)
-
-#define OMAP44XX_DMM_PHYS	OMAP44XX_DMM_BASE
-						/* 0x4e000000 --> 0xfd300000 */
-#define OMAP44XX_DMM_SIZE	SZ_1M
-#define OMAP44XX_DMM_VIRT	(OMAP44XX_EMIF2_VIRT + OMAP44XX_EMIF2_SIZE)
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index 65f0d2571c9a..fdc4303be563 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -25,6 +25,7 @@
 #include <mach/hardware.h>
 
 #include "iomap.h"
+#include "common.h"
 
 /* selected INTC register offsets */
 
@@ -149,7 +150,6 @@ omap_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num)
 	ct->chip.irq_mask = irq_gc_mask_disable_reg;
 	ct->chip.irq_unmask = irq_gc_unmask_enable_reg;
 
-	ct->regs.ack = INTC_CONTROL;
 	ct->regs.enable = INTC_MIR_CLEAR0;
 	ct->regs.disable = INTC_MIR_SET0;
 	irq_setup_generic_chip(gc, IRQ_MSK(num), IRQ_GC_INIT_MASK_CACHE,
@@ -231,7 +231,7 @@ static inline void omap_intc_handle_irq(void __iomem *base_addr, struct pt_regs
 			goto out;
 
 		irqnr = readl_relaxed(base_addr + 0xd8);
-#ifdef CONFIG_SOC_OMAPTI816X
+#ifdef CONFIG_SOC_TI81XX
 		if (irqnr)
 			goto out;
 		irqnr = readl_relaxed(base_addr + 0xf8);
@@ -334,7 +334,7 @@ void omap_intc_restore_context(void)
 void omap3_intc_suspend(void)
 {
 	/* A pending interrupt would prevent OMAP from entering suspend */
-	omap_ack_irq(0);
+	omap_ack_irq(NULL);
 }
 
 void omap3_intc_prepare_idle(void)
diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index 415a6f1cf419..19b8b6774862 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -26,9 +26,9 @@
 #define MAILBOX_IRQSTATUS(u)		(0x100 + 8 * (u))
 #define MAILBOX_IRQENABLE(u)		(0x104 + 8 * (u))
 
-#define OMAP4_MAILBOX_IRQSTATUS(u)	(0x104 + 10 * (u))
-#define OMAP4_MAILBOX_IRQENABLE(u)	(0x108 + 10 * (u))
-#define OMAP4_MAILBOX_IRQENABLE_CLR(u)	(0x10c + 10 * (u))
+#define OMAP4_MAILBOX_IRQSTATUS(u)	(0x104 + 0x10 * (u))
+#define OMAP4_MAILBOX_IRQENABLE(u)	(0x108 + 0x10 * (u))
+#define OMAP4_MAILBOX_IRQENABLE_CLR(u)	(0x10c + 0x10 * (u))
 
 #define MAILBOX_IRQ_NEWMSG(m)		(1 << (2 * (m)))
 #define MAILBOX_IRQ_NOTFULL(m)		(1 << (2 * (m) + 1))
diff --git a/arch/arm/mach-omap2/msdi.c b/arch/arm/mach-omap2/msdi.c
new file mode 100644
index 000000000000..ef2a6924731a
--- /dev/null
+++ b/arch/arm/mach-omap2/msdi.c
@@ -0,0 +1,88 @@
+/*
+ * MSDI IP block reset
+ *
+ * Copyright (C) 2012 Texas Instruments, Inc.
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * XXX What about pad muxing?
+ */
+
+#include <linux/kernel.h>
+
+#include <plat/omap_hwmod.h>
+#include <plat/mmc.h>
+
+#include "common.h"
+
+/*
+ * MSDI_CON_OFFSET: offset in bytes of the MSDI IP block's CON register
+ *     from the IP block's base address
+ */
+#define MSDI_CON_OFFSET				0x0c
+
+/* Register bitfields in the CON register */
+#define MSDI_CON_POW_MASK			BIT(11)
+#define MSDI_CON_CLKD_MASK			(0x3f << 0)
+#define MSDI_CON_CLKD_SHIFT			0
+
+/* Maximum microseconds to wait for OMAP module to softreset */
+#define MAX_MODULE_SOFTRESET_WAIT	10000
+
+/* MSDI_TARGET_RESET_CLKD: clock divisor to use throughout the reset */
+#define MSDI_TARGET_RESET_CLKD		0x3ff
+
+/**
+ * omap_msdi_reset - reset the MSDI IP block
+ * @oh: struct omap_hwmod *
+ *
+ * The MSDI IP block on OMAP2420 has to have both the POW and CLKD
+ * fields set inside its CON register for a reset to complete
+ * successfully.  This is not documented in the TRM.  For CLKD, we use
+ * the value that results in the lowest possible clock rate, to attempt
+ * to avoid disturbing any cards.
+ */
+int omap_msdi_reset(struct omap_hwmod *oh)
+{
+	u16 v = 0;
+	int c = 0;
+
+	/* Write to the SOFTRESET bit */
+	omap_hwmod_softreset(oh);
+
+	/* Enable the MSDI core and internal clock */
+	v |= MSDI_CON_POW_MASK;
+	v |= MSDI_TARGET_RESET_CLKD << MSDI_CON_CLKD_SHIFT;
+	omap_hwmod_write(v, oh, MSDI_CON_OFFSET);
+
+	/* Poll on RESETDONE bit */
+	omap_test_timeout((omap_hwmod_read(oh, oh->class->sysc->syss_offs)
+			   & SYSS_RESETDONE_MASK),
+			  MAX_MODULE_SOFTRESET_WAIT, c);
+
+	if (c == MAX_MODULE_SOFTRESET_WAIT)
+		pr_warning("%s: %s: softreset failed (waited %d usec)\n",
+			   __func__, oh->name, MAX_MODULE_SOFTRESET_WAIT);
+	else
+		pr_debug("%s: %s: softreset in %d usec\n", __func__,
+			 oh->name, c);
+
+	/* Disable the MSDI internal clock */
+	v &= ~MSDI_CON_CLKD_MASK;
+	omap_hwmod_write(v, oh, MSDI_CON_OFFSET);
+
+	return 0;
+}
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 65c33911341f..80e55c5c9998 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -247,7 +247,7 @@ int __init omap_mux_init_signal(const char *muxname, int val)
 	int mux_mode;
 
 	mux_mode = omap_mux_get_by_name(muxname, &partition, &mux);
-	if (mux_mode < 0)
+	if (mux_mode < 0 || !mux)
 		return mux_mode;
 
 	old_mode = omap_mux_read(partition, mux->reg_offset);
@@ -788,7 +788,7 @@ static void __init omap_mux_free_names(struct omap_mux *m)
 }
 
 /* Free all data except for GPIO pins unless CONFIG_DEBUG_FS is set */
-static int __init omap_mux_late_init(void)
+int __init omap_mux_late_init(void)
 {
 	struct omap_mux_partition *partition;
 	int ret;
@@ -823,7 +823,6 @@ static int __init omap_mux_late_init(void)
 
 	return 0;
 }
-late_initcall(omap_mux_late_init);
 
 static void __init omap_mux_package_fixup(struct omap_mux *p,
 					struct omap_mux *superset)
diff --git a/arch/arm/mach-omap2/omap-secure.c b/arch/arm/mach-omap2/omap-secure.c
index d8f8ef40290f..d9ae4a53d818 100644
--- a/arch/arm/mach-omap2/omap-secure.c
+++ b/arch/arm/mach-omap2/omap-secure.c
@@ -18,6 +18,7 @@
 #include <asm/cacheflush.h>
 #include <asm/memblock.h>
 
+#include <plat/omap-secure.h>
 #include <mach/omap-secure.h>
 
 static phys_addr_t omap_secure_memblock_base;
diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c
index 42cd7fb52414..d811c7790350 100644
--- a/arch/arm/mach-omap2/omap-wakeupgen.c
+++ b/arch/arm/mach-omap2/omap-wakeupgen.c
@@ -259,7 +259,7 @@ static void irq_save_context(void)
 /*
  * Clear WakeupGen SAR backup status.
  */
-void irq_sar_clear(void)
+static void irq_sar_clear(void)
 {
 	u32 val;
 	val = __raw_readl(sar_base + SAR_BACKUP_STATUS_OFFSET);
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index 70de277f5c15..a8161e5f3204 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -25,11 +25,13 @@
 #include <plat/irqs.h>
 #include <plat/sram.h>
 #include <plat/omap-secure.h>
+#include <plat/mmc.h>
 
 #include <mach/hardware.h>
 #include <mach/omap-wakeupgen.h>
 
 #include "common.h"
+#include "hsmmc.h"
 #include "omap4-sar-layout.h"
 #include <linux/export.h>
 
@@ -207,3 +209,59 @@ static int __init omap4_sar_ram_init(void)
 	return 0;
 }
 early_initcall(omap4_sar_ram_init);
+
+#if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
+static int omap4_twl6030_hsmmc_late_init(struct device *dev)
+{
+	int irq = 0;
+	struct platform_device *pdev = container_of(dev,
+				struct platform_device, dev);
+	struct omap_mmc_platform_data *pdata = dev->platform_data;
+
+	/* Setting MMC1 Card detect Irq */
+	if (pdev->id == 0) {
+		irq = twl6030_mmc_card_detect_config();
+		if (irq < 0) {
+			dev_err(dev, "%s: Error card detect config(%d)\n",
+				__func__, irq);
+			return irq;
+		}
+		pdata->slots[0].card_detect_irq = irq;
+		pdata->slots[0].card_detect = twl6030_mmc_card_detect;
+	}
+	return 0;
+}
+
+static __init void omap4_twl6030_hsmmc_set_late_init(struct device *dev)
+{
+	struct omap_mmc_platform_data *pdata;
+
+	/* dev can be null if CONFIG_MMC_OMAP_HS is not set */
+	if (!dev) {
+		pr_err("Failed %s\n", __func__);
+		return;
+	}
+	pdata = dev->platform_data;
+	pdata->init =	omap4_twl6030_hsmmc_late_init;
+}
+
+int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
+{
+	struct omap2_hsmmc_info *c;
+
+	omap_hsmmc_init(controllers);
+	for (c = controllers; c->mmc; c++) {
+		/* pdev can be null if CONFIG_MMC_OMAP_HS is not set */
+		if (!c->pdev)
+			continue;
+		omap4_twl6030_hsmmc_set_late_init(&c->pdev->dev);
+	}
+
+	return 0;
+}
+#else
+int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
+{
+	return 0;
+}
+#endif
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index eba6cd3816f5..bf86f7e8f91f 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -2,7 +2,7 @@
  * omap_hwmod implementation for OMAP2/3/4
  *
  * Copyright (C) 2009-2011 Nokia Corporation
- * Copyright (C) 2011 Texas Instruments, Inc.
+ * Copyright (C) 2011-2012 Texas Instruments, Inc.
  *
  * Paul Walmsley, Benoît Cousson, Kevin Hilman
  *
@@ -137,6 +137,7 @@
 #include <linux/mutex.h>
 #include <linux/spinlock.h>
 #include <linux/slab.h>
+#include <linux/bootmem.h>
 
 #include "common.h"
 #include <plat/cpu.h>
@@ -159,16 +160,58 @@
 /* Name of the OMAP hwmod for the MPU */
 #define MPU_INITIATOR_NAME		"mpu"
 
+/*
+ * Number of struct omap_hwmod_link records per struct
+ * omap_hwmod_ocp_if record (master->slave and slave->master)
+ */
+#define LINKS_PER_OCP_IF		2
+
 /* omap_hwmod_list contains all registered struct omap_hwmods */
 static LIST_HEAD(omap_hwmod_list);
 
 /* mpu_oh: used to add/remove MPU initiator from sleepdep list */
 static struct omap_hwmod *mpu_oh;
 
+/*
+ * linkspace: ptr to a buffer that struct omap_hwmod_link records are
+ * allocated from - used to reduce the number of small memory
+ * allocations, which has a significant impact on performance
+ */
+static struct omap_hwmod_link *linkspace;
+
+/*
+ * free_ls, max_ls: array indexes into linkspace; representing the
+ * next free struct omap_hwmod_link index, and the maximum number of
+ * struct omap_hwmod_link records allocated (respectively)
+ */
+static unsigned short free_ls, max_ls, ls_supp;
 
 /* Private functions */
 
 /**
+ * _fetch_next_ocp_if - return the next OCP interface in a list
+ * @p: ptr to a ptr to the list_head inside the ocp_if to return
+ * @i: pointer to the index of the element pointed to by @p in the list
+ *
+ * Return a pointer to the struct omap_hwmod_ocp_if record
+ * containing the struct list_head pointed to by @p, and increment
+ * @p such that a future call to this routine will return the next
+ * record.
+ */
+static struct omap_hwmod_ocp_if *_fetch_next_ocp_if(struct list_head **p,
+						    int *i)
+{
+	struct omap_hwmod_ocp_if *oi;
+
+	oi = list_entry(*p, struct omap_hwmod_link, node)->ocp_if;
+	*p = (*p)->next;
+
+	*i = *i + 1;
+
+	return oi;
+}
+
+/**
  * _update_sysc_cache - return the module OCP_SYSCONFIG register, keep copy
  * @oh: struct omap_hwmod *
  *
@@ -582,16 +625,16 @@ static int _init_main_clk(struct omap_hwmod *oh)
  */
 static int _init_interface_clks(struct omap_hwmod *oh)
 {
+	struct omap_hwmod_ocp_if *os;
+	struct list_head *p;
 	struct clk *c;
-	int i;
+	int i = 0;
 	int ret = 0;
 
-	if (oh->slaves_cnt == 0)
-		return 0;
-
-	for (i = 0; i < oh->slaves_cnt; i++) {
-		struct omap_hwmod_ocp_if *os = oh->slaves[i];
+	p = oh->slave_ports.next;
 
+	while (i < oh->slaves_cnt) {
+		os = _fetch_next_ocp_if(&p, &i);
 		if (!os->clk)
 			continue;
 
@@ -643,21 +686,22 @@ static int _init_opt_clks(struct omap_hwmod *oh)
  */
 static int _enable_clocks(struct omap_hwmod *oh)
 {
-	int i;
+	struct omap_hwmod_ocp_if *os;
+	struct list_head *p;
+	int i = 0;
 
 	pr_debug("omap_hwmod: %s: enabling clocks\n", oh->name);
 
 	if (oh->_clk)
 		clk_enable(oh->_clk);
 
-	if (oh->slaves_cnt > 0) {
-		for (i = 0; i < oh->slaves_cnt; i++) {
-			struct omap_hwmod_ocp_if *os = oh->slaves[i];
-			struct clk *c = os->_clk;
+	p = oh->slave_ports.next;
 
-			if (c && (os->flags & OCPIF_SWSUP_IDLE))
-				clk_enable(c);
-		}
+	while (i < oh->slaves_cnt) {
+		os = _fetch_next_ocp_if(&p, &i);
+
+		if (os->_clk && (os->flags & OCPIF_SWSUP_IDLE))
+			clk_enable(os->_clk);
 	}
 
 	/* The opt clocks are controlled by the device driver. */
@@ -673,21 +717,22 @@ static int _enable_clocks(struct omap_hwmod *oh)
  */
 static int _disable_clocks(struct omap_hwmod *oh)
 {
-	int i;
+	struct omap_hwmod_ocp_if *os;
+	struct list_head *p;
+	int i = 0;
 
 	pr_debug("omap_hwmod: %s: disabling clocks\n", oh->name);
 
 	if (oh->_clk)
 		clk_disable(oh->_clk);
 
-	if (oh->slaves_cnt > 0) {
-		for (i = 0; i < oh->slaves_cnt; i++) {
-			struct omap_hwmod_ocp_if *os = oh->slaves[i];
-			struct clk *c = os->_clk;
+	p = oh->slave_ports.next;
 
-			if (c && (os->flags & OCPIF_SWSUP_IDLE))
-				clk_disable(c);
-		}
+	while (i < oh->slaves_cnt) {
+		os = _fetch_next_ocp_if(&p, &i);
+
+		if (os->_clk && (os->flags & OCPIF_SWSUP_IDLE))
+			clk_disable(os->_clk);
 	}
 
 	/* The opt clocks are controlled by the device driver. */
@@ -781,39 +826,6 @@ static int _omap4_wait_target_disable(struct omap_hwmod *oh)
 }
 
 /**
- * _omap4_disable_module - enable CLKCTRL modulemode on OMAP4
- * @oh: struct omap_hwmod *
- *
- * Disable the PRCM module mode related to the hwmod @oh.
- * Return EINVAL if the modulemode is not supported and 0 in case of success.
- */
-static int _omap4_disable_module(struct omap_hwmod *oh)
-{
-	int v;
-
-	/* The module mode does not exist prior OMAP4 */
-	if (!cpu_is_omap44xx())
-		return -EINVAL;
-
-	if (!oh->clkdm || !oh->prcm.omap4.modulemode)
-		return -EINVAL;
-
-	pr_debug("omap_hwmod: %s: %s\n", oh->name, __func__);
-
-	omap4_cminst_module_disable(oh->clkdm->prcm_partition,
-				    oh->clkdm->cm_inst,
-				    oh->clkdm->clkdm_offs,
-				    oh->prcm.omap4.clkctrl_offs);
-
-	v = _omap4_wait_target_disable(oh);
-	if (v)
-		pr_warn("omap_hwmod: %s: _wait_target_disable failed\n",
-			oh->name);
-
-	return 0;
-}
-
-/**
  * _count_mpu_irqs - count the number of MPU IRQ lines associated with @oh
  * @oh: struct omap_hwmod *oh
  *
@@ -883,59 +895,220 @@ static int _count_ocp_if_addr_spaces(struct omap_hwmod_ocp_if *os)
 }
 
 /**
- * _find_mpu_port_index - find hwmod OCP slave port ID intended for MPU use
- * @oh: struct omap_hwmod *
+ * _get_mpu_irq_by_name - fetch MPU interrupt line number by name
+ * @oh: struct omap_hwmod * to operate on
+ * @name: pointer to the name of the MPU interrupt number to fetch (optional)
+ * @irq: pointer to an unsigned int to store the MPU IRQ number to
  *
- * Returns the array index of the OCP slave port that the MPU
- * addresses the device on, or -EINVAL upon error or not found.
+ * Retrieve a MPU hardware IRQ line number named by @name associated
+ * with the IP block pointed to by @oh.  The IRQ number will be filled
+ * into the address pointed to by @dma.  When @name is non-null, the
+ * IRQ line number associated with the named entry will be returned.
+ * If @name is null, the first matching entry will be returned.  Data
+ * order is not meaningful in hwmod data, so callers are strongly
+ * encouraged to use a non-null @name whenever possible to avoid
+ * unpredictable effects if hwmod data is later added that causes data
+ * ordering to change.  Returns 0 upon success or a negative error
+ * code upon error.
  */
-static int __init _find_mpu_port_index(struct omap_hwmod *oh)
+static int _get_mpu_irq_by_name(struct omap_hwmod *oh, const char *name,
+				unsigned int *irq)
 {
 	int i;
-	int found = 0;
+	bool found = false;
 
-	if (!oh || oh->slaves_cnt == 0)
-		return -EINVAL;
+	if (!oh->mpu_irqs)
+		return -ENOENT;
+
+	i = 0;
+	while (oh->mpu_irqs[i].irq != -1) {
+		if (name == oh->mpu_irqs[i].name ||
+		    !strcmp(name, oh->mpu_irqs[i].name)) {
+			found = true;
+			break;
+		}
+		i++;
+	}
 
-	for (i = 0; i < oh->slaves_cnt; i++) {
-		struct omap_hwmod_ocp_if *os = oh->slaves[i];
+	if (!found)
+		return -ENOENT;
 
-		if (os->user & OCP_USER_MPU) {
-			found = 1;
+	*irq = oh->mpu_irqs[i].irq;
+
+	return 0;
+}
+
+/**
+ * _get_sdma_req_by_name - fetch SDMA request line ID by name
+ * @oh: struct omap_hwmod * to operate on
+ * @name: pointer to the name of the SDMA request line to fetch (optional)
+ * @dma: pointer to an unsigned int to store the request line ID to
+ *
+ * Retrieve an SDMA request line ID named by @name on the IP block
+ * pointed to by @oh.  The ID will be filled into the address pointed
+ * to by @dma.  When @name is non-null, the request line ID associated
+ * with the named entry will be returned.  If @name is null, the first
+ * matching entry will be returned.  Data order is not meaningful in
+ * hwmod data, so callers are strongly encouraged to use a non-null
+ * @name whenever possible to avoid unpredictable effects if hwmod
+ * data is later added that causes data ordering to change.  Returns 0
+ * upon success or a negative error code upon error.
+ */
+static int _get_sdma_req_by_name(struct omap_hwmod *oh, const char *name,
+				 unsigned int *dma)
+{
+	int i;
+	bool found = false;
+
+	if (!oh->sdma_reqs)
+		return -ENOENT;
+
+	i = 0;
+	while (oh->sdma_reqs[i].dma_req != -1) {
+		if (name == oh->sdma_reqs[i].name ||
+		    !strcmp(name, oh->sdma_reqs[i].name)) {
+			found = true;
 			break;
 		}
+		i++;
 	}
 
-	if (found)
-		pr_debug("omap_hwmod: %s: MPU OCP slave port ID  %d\n",
-			 oh->name, i);
-	else
-		pr_debug("omap_hwmod: %s: no MPU OCP slave port found\n",
-			 oh->name);
+	if (!found)
+		return -ENOENT;
 
-	return (found) ? i : -EINVAL;
+	*dma = oh->sdma_reqs[i].dma_req;
+
+	return 0;
 }
 
 /**
- * _find_mpu_rt_base - find hwmod register target base addr accessible by MPU
- * @oh: struct omap_hwmod *
+ * _get_addr_space_by_name - fetch address space start & end by name
+ * @oh: struct omap_hwmod * to operate on
+ * @name: pointer to the name of the address space to fetch (optional)
+ * @pa_start: pointer to a u32 to store the starting address to
+ * @pa_end: pointer to a u32 to store the ending address to
  *
- * Return the virtual address of the base of the register target of
- * device @oh, or NULL on error.
+ * Retrieve address space start and end addresses for the IP block
+ * pointed to by @oh.  The data will be filled into the addresses
+ * pointed to by @pa_start and @pa_end.  When @name is non-null, the
+ * address space data associated with the named entry will be
+ * returned.  If @name is null, the first matching entry will be
+ * returned.  Data order is not meaningful in hwmod data, so callers
+ * are strongly encouraged to use a non-null @name whenever possible
+ * to avoid unpredictable effects if hwmod data is later added that
+ * causes data ordering to change.  Returns 0 upon success or a
+ * negative error code upon error.
  */
-static void __iomem * __init _find_mpu_rt_base(struct omap_hwmod *oh, u8 index)
+static int _get_addr_space_by_name(struct omap_hwmod *oh, const char *name,
+				   u32 *pa_start, u32 *pa_end)
 {
+	int i, j;
 	struct omap_hwmod_ocp_if *os;
-	struct omap_hwmod_addr_space *mem;
-	int i = 0, found = 0;
-	void __iomem *va_start;
+	struct list_head *p = NULL;
+	bool found = false;
+
+	p = oh->slave_ports.next;
+
+	i = 0;
+	while (i < oh->slaves_cnt) {
+		os = _fetch_next_ocp_if(&p, &i);
+
+		if (!os->addr)
+			return -ENOENT;
+
+		j = 0;
+		while (os->addr[j].pa_start != os->addr[j].pa_end) {
+			if (name == os->addr[j].name ||
+			    !strcmp(name, os->addr[j].name)) {
+				found = true;
+				break;
+			}
+			j++;
+		}
+
+		if (found)
+			break;
+	}
+
+	if (!found)
+		return -ENOENT;
+
+	*pa_start = os->addr[j].pa_start;
+	*pa_end = os->addr[j].pa_end;
+
+	return 0;
+}
+
+/**
+ * _save_mpu_port_index - find and save the index to @oh's MPU port
+ * @oh: struct omap_hwmod *
+ *
+ * Determines the array index of the OCP slave port that the MPU uses
+ * to address the device, and saves it into the struct omap_hwmod.
+ * Intended to be called during hwmod registration only. No return
+ * value.
+ */
+static void __init _save_mpu_port_index(struct omap_hwmod *oh)
+{
+	struct omap_hwmod_ocp_if *os = NULL;
+	struct list_head *p;
+	int i = 0;
+
+	if (!oh)
+		return;
+
+	oh->_int_flags |= _HWMOD_NO_MPU_PORT;
+
+	p = oh->slave_ports.next;
+
+	while (i < oh->slaves_cnt) {
+		os = _fetch_next_ocp_if(&p, &i);
+		if (os->user & OCP_USER_MPU) {
+			oh->_mpu_port = os;
+			oh->_int_flags &= ~_HWMOD_NO_MPU_PORT;
+			break;
+		}
+	}
 
-	if (!oh || oh->slaves_cnt == 0)
+	return;
+}
+
+/**
+ * _find_mpu_rt_port - return omap_hwmod_ocp_if accessible by the MPU
+ * @oh: struct omap_hwmod *
+ *
+ * Given a pointer to a struct omap_hwmod record @oh, return a pointer
+ * to the struct omap_hwmod_ocp_if record that is used by the MPU to
+ * communicate with the IP block.  This interface need not be directly
+ * connected to the MPU (and almost certainly is not), but is directly
+ * connected to the IP block represented by @oh.  Returns a pointer
+ * to the struct omap_hwmod_ocp_if * upon success, or returns NULL upon
+ * error or if there does not appear to be a path from the MPU to this
+ * IP block.
+ */
+static struct omap_hwmod_ocp_if *_find_mpu_rt_port(struct omap_hwmod *oh)
+{
+	if (!oh || oh->_int_flags & _HWMOD_NO_MPU_PORT || oh->slaves_cnt == 0)
 		return NULL;
 
-	os = oh->slaves[index];
+	return oh->_mpu_port;
+};
 
-	if (!os->addr)
+/**
+ * _find_mpu_rt_addr_space - return MPU register target address space for @oh
+ * @oh: struct omap_hwmod *
+ *
+ * Returns a pointer to the struct omap_hwmod_addr_space record representing
+ * the register target MPU address space; or returns NULL upon error.
+ */
+static struct omap_hwmod_addr_space * __init _find_mpu_rt_addr_space(struct omap_hwmod *oh)
+{
+	struct omap_hwmod_ocp_if *os;
+	struct omap_hwmod_addr_space *mem;
+	int found = 0, i = 0;
+
+	os = _find_mpu_rt_port(oh);
+	if (!os || !os->addr)
 		return NULL;
 
 	do {
@@ -944,20 +1117,7 @@ static void __iomem * __init _find_mpu_rt_base(struct omap_hwmod *oh, u8 index)
 			found = 1;
 	} while (!found && mem->pa_start != mem->pa_end);
 
-	if (found) {
-		va_start = ioremap(mem->pa_start, mem->pa_end - mem->pa_start);
-		if (!va_start) {
-			pr_err("omap_hwmod: %s: Could not ioremap\n", oh->name);
-			return NULL;
-		}
-		pr_debug("omap_hwmod: %s: MPU register target at va %p\n",
-			 oh->name, va_start);
-	} else {
-		pr_debug("omap_hwmod: %s: no MPU register target found\n",
-			 oh->name);
-	}
-
-	return (found) ? va_start : NULL;
+	return (found) ? mem : NULL;
 }
 
 /**
@@ -1205,12 +1365,11 @@ static int _wait_target_ready(struct omap_hwmod *oh)
 	if (!oh)
 		return -EINVAL;
 
-	if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
+	if (oh->flags & HWMOD_NO_IDLEST)
 		return 0;
 
-	os = oh->slaves[oh->_mpu_port_index];
-
-	if (oh->flags & HWMOD_NO_IDLEST)
+	os = _find_mpu_rt_port(oh);
+	if (!os)
 		return 0;
 
 	/* XXX check module SIDLEMODE */
@@ -1378,13 +1537,73 @@ static int _read_hardreset(struct omap_hwmod *oh, const char *name)
 }
 
 /**
+ * _are_any_hardreset_lines_asserted - return true if part of @oh is hard-reset
+ * @oh: struct omap_hwmod *
+ *
+ * If any hardreset line associated with @oh is asserted, then return true.
+ * Otherwise, if @oh has no hardreset lines associated with it, or if
+ * no hardreset lines associated with @oh are asserted, then return false.
+ * This function is used to avoid executing some parts of the IP block
+ * enable/disable sequence if a hardreset line is set.
+ */
+static bool _are_any_hardreset_lines_asserted(struct omap_hwmod *oh)
+{
+	int i;
+
+	if (oh->rst_lines_cnt == 0)
+		return false;
+
+	for (i = 0; i < oh->rst_lines_cnt; i++)
+		if (_read_hardreset(oh, oh->rst_lines[i].name) > 0)
+			return true;
+
+	return false;
+}
+
+/**
+ * _omap4_disable_module - enable CLKCTRL modulemode on OMAP4
+ * @oh: struct omap_hwmod *
+ *
+ * Disable the PRCM module mode related to the hwmod @oh.
+ * Return EINVAL if the modulemode is not supported and 0 in case of success.
+ */
+static int _omap4_disable_module(struct omap_hwmod *oh)
+{
+	int v;
+
+	/* The module mode does not exist prior OMAP4 */
+	if (!cpu_is_omap44xx())
+		return -EINVAL;
+
+	if (!oh->clkdm || !oh->prcm.omap4.modulemode)
+		return -EINVAL;
+
+	pr_debug("omap_hwmod: %s: %s\n", oh->name, __func__);
+
+	omap4_cminst_module_disable(oh->clkdm->prcm_partition,
+				    oh->clkdm->cm_inst,
+				    oh->clkdm->clkdm_offs,
+				    oh->prcm.omap4.clkctrl_offs);
+
+	if (_are_any_hardreset_lines_asserted(oh))
+		return 0;
+
+	v = _omap4_wait_target_disable(oh);
+	if (v)
+		pr_warn("omap_hwmod: %s: _wait_target_disable failed\n",
+			oh->name);
+
+	return 0;
+}
+
+/**
  * _ocp_softreset - reset an omap_hwmod via the OCP_SYSCONFIG bit
  * @oh: struct omap_hwmod *
  *
  * Resets an omap_hwmod @oh via the OCP_SYSCONFIG bit.  hwmod must be
- * enabled for this to work.  Returns -EINVAL if the hwmod cannot be
- * reset this way or if the hwmod is in the wrong state, -ETIMEDOUT if
- * the module did not reset in time, or 0 upon success.
+ * enabled for this to work.  Returns -ENOENT if the hwmod cannot be
+ * reset this way, -EINVAL if the hwmod is in the wrong state,
+ * -ETIMEDOUT if the module did not reset in time, or 0 upon success.
  *
  * In OMAP3 a specific SYSSTATUS register is used to get the reset status.
  * Starting in OMAP4, some IPs do not have SYSSTATUS registers and instead
@@ -1395,13 +1614,13 @@ static int _read_hardreset(struct omap_hwmod *oh, const char *name)
  */
 static int _ocp_softreset(struct omap_hwmod *oh)
 {
-	u32 v;
+	u32 v, softrst_mask;
 	int c = 0;
 	int ret = 0;
 
 	if (!oh->class->sysc ||
 	    !(oh->class->sysc->sysc_flags & SYSC_HAS_SOFTRESET))
-		return -EINVAL;
+		return -ENOENT;
 
 	/* clocks must be on for this operation */
 	if (oh->_state != _HWMOD_STATE_ENABLED) {
@@ -1422,16 +1641,21 @@ static int _ocp_softreset(struct omap_hwmod *oh)
 		goto dis_opt_clks;
 	_write_sysconfig(v, oh);
 
+	if (oh->class->sysc->srst_udelay)
+		udelay(oh->class->sysc->srst_udelay);
+
 	if (oh->class->sysc->sysc_flags & SYSS_HAS_RESET_STATUS)
 		omap_test_timeout((omap_hwmod_read(oh,
 						    oh->class->sysc->syss_offs)
 				   & SYSS_RESETDONE_MASK),
 				  MAX_MODULE_SOFTRESET_WAIT, c);
-	else if (oh->class->sysc->sysc_flags & SYSC_HAS_RESET_STATUS)
+	else if (oh->class->sysc->sysc_flags & SYSC_HAS_RESET_STATUS) {
+		softrst_mask = (0x1 << oh->class->sysc->sysc_fields->srst_shift);
 		omap_test_timeout(!(omap_hwmod_read(oh,
 						     oh->class->sysc->sysc_offs)
-				   & SYSC_TYPE2_SOFTRESET_MASK),
+				   & softrst_mask),
 				  MAX_MODULE_SOFTRESET_WAIT, c);
+	}
 
 	if (c == MAX_MODULE_SOFTRESET_WAIT)
 		pr_warning("omap_hwmod: %s: softreset failed (waited %d usec)\n",
@@ -1457,27 +1681,60 @@ dis_opt_clks:
  * _reset - reset an omap_hwmod
  * @oh: struct omap_hwmod *
  *
- * Resets an omap_hwmod @oh.  The default software reset mechanism for
- * most OMAP IP blocks is triggered via the OCP_SYSCONFIG.SOFTRESET
- * bit.  However, some hwmods cannot be reset via this method: some
- * are not targets and therefore have no OCP header registers to
- * access; others (like the IVA) have idiosyncratic reset sequences.
- * So for these relatively rare cases, custom reset code can be
- * supplied in the struct omap_hwmod_class .reset function pointer.
- * Passes along the return value from either _reset() or the custom
- * reset function - these must return -EINVAL if the hwmod cannot be
- * reset this way or if the hwmod is in the wrong state, -ETIMEDOUT if
- * the module did not reset in time, or 0 upon success.
+ * Resets an omap_hwmod @oh.  If the module has a custom reset
+ * function pointer defined, then call it to reset the IP block, and
+ * pass along its return value to the caller.  Otherwise, if the IP
+ * block has an OCP_SYSCONFIG register with a SOFTRESET bitfield
+ * associated with it, call a function to reset the IP block via that
+ * method, and pass along the return value to the caller.  Finally, if
+ * the IP block has some hardreset lines associated with it, assert
+ * all of those, but do _not_ deassert them. (This is because driver
+ * authors have expressed an apparent requirement to control the
+ * deassertion of the hardreset lines themselves.)
+ *
+ * The default software reset mechanism for most OMAP IP blocks is
+ * triggered via the OCP_SYSCONFIG.SOFTRESET bit.  However, some
+ * hwmods cannot be reset via this method.  Some are not targets and
+ * therefore have no OCP header registers to access.  Others (like the
+ * IVA) have idiosyncratic reset sequences.  So for these relatively
+ * rare cases, custom reset code can be supplied in the struct
+ * omap_hwmod_class .reset function pointer.  Passes along the return
+ * value from either _ocp_softreset() or the custom reset function -
+ * these must return -EINVAL if the hwmod cannot be reset this way or
+ * if the hwmod is in the wrong state, -ETIMEDOUT if the module did
+ * not reset in time, or 0 upon success.
  */
 static int _reset(struct omap_hwmod *oh)
 {
-	int ret;
+	int i, r;
 
 	pr_debug("omap_hwmod: %s: resetting\n", oh->name);
 
-	ret = (oh->class->reset) ? oh->class->reset(oh) : _ocp_softreset(oh);
+	if (oh->class->reset) {
+		r = oh->class->reset(oh);
+	} else {
+		if (oh->rst_lines_cnt > 0) {
+			for (i = 0; i < oh->rst_lines_cnt; i++)
+				_assert_hardreset(oh, oh->rst_lines[i].name);
+			return 0;
+		} else {
+			r = _ocp_softreset(oh);
+			if (r == -ENOENT)
+				r = 0;
+		}
+	}
 
-	return ret;
+	/*
+	 * OCP_SYSCONFIG bits need to be reprogrammed after a
+	 * softreset.  The _enable() function should be split to avoid
+	 * the rewrite of the OCP_SYSCONFIG register.
+	 */
+	if (oh->class->sysc) {
+		_update_sysc_cache(oh);
+		_enable_sysc(oh);
+	}
+
+	return r;
 }
 
 /**
@@ -1496,10 +1753,9 @@ static int _enable(struct omap_hwmod *oh)
 	pr_debug("omap_hwmod: %s: enabling\n", oh->name);
 
 	/*
-	 * hwmods with HWMOD_INIT_NO_IDLE flag set are left
-	 * in enabled state at init.
-	 * Now that someone is really trying to enable them,
-	 * just ensure that the hwmod mux is set.
+	 * hwmods with HWMOD_INIT_NO_IDLE flag set are left in enabled
+	 * state at init.  Now that someone is really trying to enable
+	 * them, just ensure that the hwmod mux is set.
 	 */
 	if (oh->_int_flags & _HWMOD_SKIP_ENABLE) {
 		/*
@@ -1522,15 +1778,17 @@ static int _enable(struct omap_hwmod *oh)
 		return -EINVAL;
 	}
 
-
 	/*
-	 * If an IP contains only one HW reset line, then de-assert it in order
-	 * to allow the module state transition. Otherwise the PRCM will return
-	 * Intransition status, and the init will failed.
+	 * If an IP block contains HW reset lines and any of them are
+	 * asserted, we let integration code associated with that
+	 * block handle the enable.  We've received very little
+	 * information on what those driver authors need, and until
+	 * detailed information is provided and the driver code is
+	 * posted to the public lists, this is probably the best we
+	 * can do.
 	 */
-	if ((oh->_state == _HWMOD_STATE_INITIALIZED ||
-	     oh->_state == _HWMOD_STATE_DISABLED) && oh->rst_lines_cnt == 1)
-		_deassert_hardreset(oh, oh->rst_lines[0].name);
+	if (_are_any_hardreset_lines_asserted(oh))
+		return 0;
 
 	/* Mux pins for device runtime if populated */
 	if (oh->mux && (!oh->mux->enabled ||
@@ -1605,6 +1863,9 @@ static int _idle(struct omap_hwmod *oh)
 		return -EINVAL;
 	}
 
+	if (_are_any_hardreset_lines_asserted(oh))
+		return 0;
+
 	if (oh->class->sysc)
 		_idle_sysc(oh);
 	_del_initiator_dep(oh, mpu_oh);
@@ -1677,7 +1938,7 @@ int omap_hwmod_set_ocp_autoidle(struct omap_hwmod *oh, u8 autoidle)
  */
 static int _shutdown(struct omap_hwmod *oh)
 {
-	int ret;
+	int ret, i;
 	u8 prev_state;
 
 	if (oh->_state != _HWMOD_STATE_IDLE &&
@@ -1687,6 +1948,9 @@ static int _shutdown(struct omap_hwmod *oh)
 		return -EINVAL;
 	}
 
+	if (_are_any_hardreset_lines_asserted(oh))
+		return 0;
+
 	pr_debug("omap_hwmod: %s: disabling\n", oh->name);
 
 	if (oh->class->pre_shutdown) {
@@ -1718,12 +1982,8 @@ static int _shutdown(struct omap_hwmod *oh)
 	}
 	/* XXX Should this code also force-disable the optional clocks? */
 
-	/*
-	 * If an IP contains only one HW reset line, then assert it
-	 * after disabling the clocks and before shutting down the IP.
-	 */
-	if (oh->rst_lines_cnt == 1)
-		_assert_hardreset(oh, oh->rst_lines[0].name);
+	for (i = 0; i < oh->rst_lines_cnt; i++)
+		_assert_hardreset(oh, oh->rst_lines[i].name);
 
 	/* Mux pins to safe mode or use populated off mode values */
 	if (oh->mux)
@@ -1735,71 +1995,187 @@ static int _shutdown(struct omap_hwmod *oh)
 }
 
 /**
- * _setup - do initial configuration of omap_hwmod
- * @oh: struct omap_hwmod *
+ * _init_mpu_rt_base - populate the virtual address for a hwmod
+ * @oh: struct omap_hwmod * to locate the virtual address
  *
- * Writes the CLOCKACTIVITY bits @clockact to the hwmod @oh
- * OCP_SYSCONFIG register.  Returns 0.
+ * Cache the virtual address used by the MPU to access this IP block's
+ * registers.  This address is needed early so the OCP registers that
+ * are part of the device's address space can be ioremapped properly.
+ * No return value.
  */
-static int _setup(struct omap_hwmod *oh, void *data)
+static void __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data)
 {
-	int i, r;
-	u8 postsetup_state;
+	struct omap_hwmod_addr_space *mem;
+	void __iomem *va_start;
 
-	if (oh->_state != _HWMOD_STATE_CLKS_INITED)
-		return 0;
+	if (!oh)
+		return;
 
-	/* Set iclk autoidle mode */
-	if (oh->slaves_cnt > 0) {
-		for (i = 0; i < oh->slaves_cnt; i++) {
-			struct omap_hwmod_ocp_if *os = oh->slaves[i];
-			struct clk *c = os->_clk;
+	_save_mpu_port_index(oh);
 
-			if (!c)
-				continue;
+	if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
+		return;
 
-			if (os->flags & OCPIF_SWSUP_IDLE) {
-				/* XXX omap_iclk_deny_idle(c); */
-			} else {
-				/* XXX omap_iclk_allow_idle(c); */
-				clk_enable(c);
-			}
-		}
+	mem = _find_mpu_rt_addr_space(oh);
+	if (!mem) {
+		pr_debug("omap_hwmod: %s: no MPU register target found\n",
+			 oh->name);
+		return;
 	}
 
-	oh->_state = _HWMOD_STATE_INITIALIZED;
+	va_start = ioremap(mem->pa_start, mem->pa_end - mem->pa_start);
+	if (!va_start) {
+		pr_err("omap_hwmod: %s: Could not ioremap\n", oh->name);
+		return;
+	}
 
-	/*
-	 * In the case of hwmod with hardreset that should not be
-	 * de-assert at boot time, we have to keep the module
-	 * initialized, because we cannot enable it properly with the
-	 * reset asserted. Exit without warning because that behavior is
-	 * expected.
-	 */
-	if ((oh->flags & HWMOD_INIT_NO_RESET) && oh->rst_lines_cnt == 1)
-		return 0;
+	pr_debug("omap_hwmod: %s: MPU register target at va %p\n",
+		 oh->name, va_start);
 
-	r = _enable(oh);
-	if (r) {
-		pr_warning("omap_hwmod: %s: cannot be enabled (%d)\n",
-			   oh->name, oh->_state);
+	oh->_mpu_rt_va = va_start;
+}
+
+/**
+ * _init - initialize internal data for the hwmod @oh
+ * @oh: struct omap_hwmod *
+ * @n: (unused)
+ *
+ * Look up the clocks and the address space used by the MPU to access
+ * registers belonging to the hwmod @oh.  @oh must already be
+ * registered at this point.  This is the first of two phases for
+ * hwmod initialization.  Code called here does not touch any hardware
+ * registers, it simply prepares internal data structures.  Returns 0
+ * upon success or if the hwmod isn't registered, or -EINVAL upon
+ * failure.
+ */
+static int __init _init(struct omap_hwmod *oh, void *data)
+{
+	int r;
+
+	if (oh->_state != _HWMOD_STATE_REGISTERED)
 		return 0;
+
+	_init_mpu_rt_base(oh, NULL);
+
+	r = _init_clocks(oh, NULL);
+	if (IS_ERR_VALUE(r)) {
+		WARN(1, "omap_hwmod: %s: couldn't init clocks\n", oh->name);
+		return -EINVAL;
 	}
 
-	if (!(oh->flags & HWMOD_INIT_NO_RESET)) {
-		_reset(oh);
+	oh->_state = _HWMOD_STATE_INITIALIZED;
 
-		/*
-		 * OCP_SYSCONFIG bits need to be reprogrammed after a softreset.
-		 * The _enable() function should be split to
-		 * avoid the rewrite of the OCP_SYSCONFIG register.
-		 */
-		if (oh->class->sysc) {
-			_update_sysc_cache(oh);
-			_enable_sysc(oh);
+	return 0;
+}
+
+/**
+ * _setup_iclk_autoidle - configure an IP block's interface clocks
+ * @oh: struct omap_hwmod *
+ *
+ * Set up the module's interface clocks.  XXX This function is still mostly
+ * a stub; implementing this properly requires iclk autoidle usecounting in
+ * the clock code.   No return value.
+ */
+static void __init _setup_iclk_autoidle(struct omap_hwmod *oh)
+{
+	struct omap_hwmod_ocp_if *os;
+	struct list_head *p;
+	int i = 0;
+	if (oh->_state != _HWMOD_STATE_INITIALIZED)
+		return;
+
+	p = oh->slave_ports.next;
+
+	while (i < oh->slaves_cnt) {
+		os = _fetch_next_ocp_if(&p, &i);
+		if (!os->_clk)
+			continue;
+
+		if (os->flags & OCPIF_SWSUP_IDLE) {
+			/* XXX omap_iclk_deny_idle(c); */
+		} else {
+			/* XXX omap_iclk_allow_idle(c); */
+			clk_enable(os->_clk);
 		}
 	}
 
+	return;
+}
+
+/**
+ * _setup_reset - reset an IP block during the setup process
+ * @oh: struct omap_hwmod *
+ *
+ * Reset the IP block corresponding to the hwmod @oh during the setup
+ * process.  The IP block is first enabled so it can be successfully
+ * reset.  Returns 0 upon success or a negative error code upon
+ * failure.
+ */
+static int __init _setup_reset(struct omap_hwmod *oh)
+{
+	int r;
+
+	if (oh->_state != _HWMOD_STATE_INITIALIZED)
+		return -EINVAL;
+
+	if (oh->rst_lines_cnt == 0) {
+		r = _enable(oh);
+		if (r) {
+			pr_warning("omap_hwmod: %s: cannot be enabled for reset (%d)\n",
+				   oh->name, oh->_state);
+			return -EINVAL;
+		}
+	}
+
+	if (!(oh->flags & HWMOD_INIT_NO_RESET))
+		r = _reset(oh);
+
+	return r;
+}
+
+/**
+ * _setup_postsetup - transition to the appropriate state after _setup
+ * @oh: struct omap_hwmod *
+ *
+ * Place an IP block represented by @oh into a "post-setup" state --
+ * either IDLE, ENABLED, or DISABLED.  ("post-setup" simply means that
+ * this function is called at the end of _setup().)  The postsetup
+ * state for an IP block can be changed by calling
+ * omap_hwmod_enter_postsetup_state() early in the boot process,
+ * before one of the omap_hwmod_setup*() functions are called for the
+ * IP block.
+ *
+ * The IP block stays in this state until a PM runtime-based driver is
+ * loaded for that IP block.  A post-setup state of IDLE is
+ * appropriate for almost all IP blocks with runtime PM-enabled
+ * drivers, since those drivers are able to enable the IP block.  A
+ * post-setup state of ENABLED is appropriate for kernels with PM
+ * runtime disabled.  The DISABLED state is appropriate for unusual IP
+ * blocks such as the MPU WDTIMER on kernels without WDTIMER drivers
+ * included, since the WDTIMER starts running on reset and will reset
+ * the MPU if left active.
+ *
+ * This post-setup mechanism is deprecated.  Once all of the OMAP
+ * drivers have been converted to use PM runtime, and all of the IP
+ * block data and interconnect data is available to the hwmod code, it
+ * should be possible to replace this mechanism with a "lazy reset"
+ * arrangement.  In a "lazy reset" setup, each IP block is enabled
+ * when the driver first probes, then all remaining IP blocks without
+ * drivers are either shut down or enabled after the drivers have
+ * loaded.  However, this cannot take place until the above
+ * preconditions have been met, since otherwise the late reset code
+ * has no way of knowing which IP blocks are in use by drivers, and
+ * which ones are unused.
+ *
+ * No return value.
+ */
+static void __init _setup_postsetup(struct omap_hwmod *oh)
+{
+	u8 postsetup_state;
+
+	if (oh->rst_lines_cnt > 0)
+		return;
+
 	postsetup_state = oh->_postsetup_state;
 	if (postsetup_state == _HWMOD_STATE_UNKNOWN)
 		postsetup_state = _HWMOD_STATE_ENABLED;
@@ -1822,6 +2198,35 @@ static int _setup(struct omap_hwmod *oh, void *data)
 		WARN(1, "hwmod: %s: unknown postsetup state %d! defaulting to enabled\n",
 		     oh->name, postsetup_state);
 
+	return;
+}
+
+/**
+ * _setup - prepare IP block hardware for use
+ * @oh: struct omap_hwmod *
+ * @n: (unused, pass NULL)
+ *
+ * Configure the IP block represented by @oh.  This may include
+ * enabling the IP block, resetting it, and placing it into a
+ * post-setup state, depending on the type of IP block and applicable
+ * flags.  IP blocks are reset to prevent any previous configuration
+ * by the bootloader or previous operating system from interfering
+ * with power management or other parts of the system.  The reset can
+ * be avoided; see omap_hwmod_no_setup_reset().  This is the second of
+ * two phases for hwmod initialization.  Code called here generally
+ * affects the IP block hardware, or system integration hardware
+ * associated with the IP block.  Returns 0.
+ */
+static int __init _setup(struct omap_hwmod *oh, void *data)
+{
+	if (oh->_state != _HWMOD_STATE_INITIALIZED)
+		return 0;
+
+	_setup_iclk_autoidle(oh);
+
+	if (!_setup_reset(oh))
+		_setup_postsetup(oh);
+
 	return 0;
 }
 
@@ -1844,8 +2249,6 @@ static int _setup(struct omap_hwmod *oh, void *data)
  */
 static int __init _register(struct omap_hwmod *oh)
 {
-	int ms_id;
-
 	if (!oh || !oh->name || !oh->class || !oh->class->name ||
 	    (oh->_state != _HWMOD_STATE_UNKNOWN))
 		return -EINVAL;
@@ -1855,14 +2258,10 @@ static int __init _register(struct omap_hwmod *oh)
 	if (_lookup(oh->name))
 		return -EEXIST;
 
-	ms_id = _find_mpu_port_index(oh);
-	if (!IS_ERR_VALUE(ms_id))
-		oh->_mpu_port_index = ms_id;
-	else
-		oh->_int_flags |= _HWMOD_NO_MPU_PORT;
-
 	list_add_tail(&oh->node, &omap_hwmod_list);
 
+	INIT_LIST_HEAD(&oh->master_ports);
+	INIT_LIST_HEAD(&oh->slave_ports);
 	spin_lock_init(&oh->_lock);
 
 	oh->_state = _HWMOD_STATE_REGISTERED;
@@ -1877,6 +2276,160 @@ static int __init _register(struct omap_hwmod *oh)
 	return 0;
 }
 
+/**
+ * _alloc_links - return allocated memory for hwmod links
+ * @ml: pointer to a struct omap_hwmod_link * for the master link
+ * @sl: pointer to a struct omap_hwmod_link * for the slave link
+ *
+ * Return pointers to two struct omap_hwmod_link records, via the
+ * addresses pointed to by @ml and @sl.  Will first attempt to return
+ * memory allocated as part of a large initial block, but if that has
+ * been exhausted, will allocate memory itself.  Since ideally this
+ * second allocation path will never occur, the number of these
+ * 'supplemental' allocations will be logged when debugging is
+ * enabled.  Returns 0.
+ */
+static int __init _alloc_links(struct omap_hwmod_link **ml,
+			       struct omap_hwmod_link **sl)
+{
+	unsigned int sz;
+
+	if ((free_ls + LINKS_PER_OCP_IF) <= max_ls) {
+		*ml = &linkspace[free_ls++];
+		*sl = &linkspace[free_ls++];
+		return 0;
+	}
+
+	sz = sizeof(struct omap_hwmod_link) * LINKS_PER_OCP_IF;
+
+	*sl = NULL;
+	*ml = alloc_bootmem(sz);
+
+	memset(*ml, 0, sz);
+
+	*sl = (void *)(*ml) + sizeof(struct omap_hwmod_link);
+
+	ls_supp++;
+	pr_debug("omap_hwmod: supplemental link allocations needed: %d\n",
+		 ls_supp * LINKS_PER_OCP_IF);
+
+	return 0;
+};
+
+/**
+ * _add_link - add an interconnect between two IP blocks
+ * @oi: pointer to a struct omap_hwmod_ocp_if record
+ *
+ * Add struct omap_hwmod_link records connecting the master IP block
+ * specified in @oi->master to @oi, and connecting the slave IP block
+ * specified in @oi->slave to @oi.  This code is assumed to run before
+ * preemption or SMP has been enabled, thus avoiding the need for
+ * locking in this code.  Changes to this assumption will require
+ * additional locking.  Returns 0.
+ */
+static int __init _add_link(struct omap_hwmod_ocp_if *oi)
+{
+	struct omap_hwmod_link *ml, *sl;
+
+	pr_debug("omap_hwmod: %s -> %s: adding link\n", oi->master->name,
+		 oi->slave->name);
+
+	_alloc_links(&ml, &sl);
+
+	ml->ocp_if = oi;
+	INIT_LIST_HEAD(&ml->node);
+	list_add(&ml->node, &oi->master->master_ports);
+	oi->master->masters_cnt++;
+
+	sl->ocp_if = oi;
+	INIT_LIST_HEAD(&sl->node);
+	list_add(&sl->node, &oi->slave->slave_ports);
+	oi->slave->slaves_cnt++;
+
+	return 0;
+}
+
+/**
+ * _register_link - register a struct omap_hwmod_ocp_if
+ * @oi: struct omap_hwmod_ocp_if *
+ *
+ * Registers the omap_hwmod_ocp_if record @oi.  Returns -EEXIST if it
+ * has already been registered; -EINVAL if @oi is NULL or if the
+ * record pointed to by @oi is missing required fields; or 0 upon
+ * success.
+ *
+ * XXX The data should be copied into bootmem, so the original data
+ * should be marked __initdata and freed after init.  This would allow
+ * unneeded omap_hwmods to be freed on multi-OMAP configurations.
+ */
+static int __init _register_link(struct omap_hwmod_ocp_if *oi)
+{
+	if (!oi || !oi->master || !oi->slave || !oi->user)
+		return -EINVAL;
+
+	if (oi->_int_flags & _OCPIF_INT_FLAGS_REGISTERED)
+		return -EEXIST;
+
+	pr_debug("omap_hwmod: registering link from %s to %s\n",
+		 oi->master->name, oi->slave->name);
+
+	/*
+	 * Register the connected hwmods, if they haven't been
+	 * registered already
+	 */
+	if (oi->master->_state != _HWMOD_STATE_REGISTERED)
+		_register(oi->master);
+
+	if (oi->slave->_state != _HWMOD_STATE_REGISTERED)
+		_register(oi->slave);
+
+	_add_link(oi);
+
+	oi->_int_flags |= _OCPIF_INT_FLAGS_REGISTERED;
+
+	return 0;
+}
+
+/**
+ * _alloc_linkspace - allocate large block of hwmod links
+ * @ois: pointer to an array of struct omap_hwmod_ocp_if records to count
+ *
+ * Allocate a large block of struct omap_hwmod_link records.  This
+ * improves boot time significantly by avoiding the need to allocate
+ * individual records one by one.  If the number of records to
+ * allocate in the block hasn't been manually specified, this function
+ * will count the number of struct omap_hwmod_ocp_if records in @ois
+ * and use that to determine the allocation size.  For SoC families
+ * that require multiple list registrations, such as OMAP3xxx, this
+ * estimation process isn't optimal, so manual estimation is advised
+ * in those cases.  Returns -EEXIST if the allocation has already occurred
+ * or 0 upon success.
+ */
+static int __init _alloc_linkspace(struct omap_hwmod_ocp_if **ois)
+{
+	unsigned int i = 0;
+	unsigned int sz;
+
+	if (linkspace) {
+		WARN(1, "linkspace already allocated\n");
+		return -EEXIST;
+	}
+
+	if (max_ls == 0)
+		while (ois[i++])
+			max_ls += LINKS_PER_OCP_IF;
+
+	sz = sizeof(struct omap_hwmod_link) * max_ls;
+
+	pr_debug("omap_hwmod: %s: allocating %d byte linkspace (%d links)\n",
+		 __func__, sz, max_ls);
+
+	linkspace = alloc_bootmem(sz);
+
+	memset(linkspace, 0, sz);
+
+	return 0;
+}
 
 /* Public functions */
 
@@ -2005,120 +2558,101 @@ int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data),
 }
 
 /**
- * omap_hwmod_register - register an array of hwmods
- * @ohs: pointer to an array of omap_hwmods to register
+ * omap_hwmod_register_links - register an array of hwmod links
+ * @ois: pointer to an array of omap_hwmod_ocp_if to register
  *
  * Intended to be called early in boot before the clock framework is
- * initialized.  If @ohs is not null, will register all omap_hwmods
- * listed in @ohs that are valid for this chip.  Returns 0.
+ * initialized.  If @ois is not null, will register all omap_hwmods
+ * listed in @ois that are valid for this chip.  Returns 0.
  */
-int __init omap_hwmod_register(struct omap_hwmod **ohs)
+int __init omap_hwmod_register_links(struct omap_hwmod_ocp_if **ois)
 {
 	int r, i;
 
-	if (!ohs)
+	if (!ois)
 		return 0;
 
+	if (!linkspace) {
+		if (_alloc_linkspace(ois)) {
+			pr_err("omap_hwmod: could not allocate link space\n");
+			return -ENOMEM;
+		}
+	}
+
 	i = 0;
 	do {
-		r = _register(ohs[i]);
-		WARN(r, "omap_hwmod: %s: _register returned %d\n", ohs[i]->name,
-		     r);
-	} while (ohs[++i]);
+		r = _register_link(ois[i]);
+		WARN(r && r != -EEXIST,
+		     "omap_hwmod: _register_link(%s -> %s) returned %d\n",
+		     ois[i]->master->name, ois[i]->slave->name, r);
+	} while (ois[++i]);
 
 	return 0;
 }
 
-/*
- * _populate_mpu_rt_base - populate the virtual address for a hwmod
+/**
+ * _ensure_mpu_hwmod_is_setup - ensure the MPU SS hwmod is init'ed and set up
+ * @oh: pointer to the hwmod currently being set up (usually not the MPU)
  *
- * Must be called only from omap_hwmod_setup_*() so ioremap works properly.
- * Assumes the caller takes care of locking if needed.
+ * If the hwmod data corresponding to the MPU subsystem IP block
+ * hasn't been initialized and set up yet, do so now.  This must be
+ * done first since sleep dependencies may be added from other hwmods
+ * to the MPU.  Intended to be called only by omap_hwmod_setup*().  No
+ * return value.
  */
-static int __init _populate_mpu_rt_base(struct omap_hwmod *oh, void *data)
+static void __init _ensure_mpu_hwmod_is_setup(struct omap_hwmod *oh)
 {
-	if (oh->_state != _HWMOD_STATE_REGISTERED)
-		return 0;
-
-	if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
-		return 0;
-
-	oh->_mpu_rt_va = _find_mpu_rt_base(oh, oh->_mpu_port_index);
-
-	return 0;
+	if (!mpu_oh || mpu_oh->_state == _HWMOD_STATE_UNKNOWN)
+		pr_err("omap_hwmod: %s: MPU initiator hwmod %s not yet registered\n",
+		       __func__, MPU_INITIATOR_NAME);
+	else if (mpu_oh->_state == _HWMOD_STATE_REGISTERED && oh != mpu_oh)
+		omap_hwmod_setup_one(MPU_INITIATOR_NAME);
 }
 
 /**
  * omap_hwmod_setup_one - set up a single hwmod
  * @oh_name: const char * name of the already-registered hwmod to set up
  *
- * Must be called after omap2_clk_init().  Resolves the struct clk
- * names to struct clk pointers for each registered omap_hwmod.  Also
- * calls _setup() on each hwmod.  Returns -EINVAL upon error or 0 upon
- * success.
+ * Initialize and set up a single hwmod.  Intended to be used for a
+ * small number of early devices, such as the timer IP blocks used for
+ * the scheduler clock.  Must be called after omap2_clk_init().
+ * Resolves the struct clk names to struct clk pointers for each
+ * registered omap_hwmod.  Also calls _setup() on each hwmod.  Returns
+ * -EINVAL upon error or 0 upon success.
  */
 int __init omap_hwmod_setup_one(const char *oh_name)
 {
 	struct omap_hwmod *oh;
-	int r;
 
 	pr_debug("omap_hwmod: %s: %s\n", oh_name, __func__);
 
-	if (!mpu_oh) {
-		pr_err("omap_hwmod: %s: cannot setup_one: MPU initiator hwmod %s not yet registered\n",
-		       oh_name, MPU_INITIATOR_NAME);
-		return -EINVAL;
-	}
-
 	oh = _lookup(oh_name);
 	if (!oh) {
 		WARN(1, "omap_hwmod: %s: hwmod not yet registered\n", oh_name);
 		return -EINVAL;
 	}
 
-	if (mpu_oh->_state == _HWMOD_STATE_REGISTERED && oh != mpu_oh)
-		omap_hwmod_setup_one(MPU_INITIATOR_NAME);
-
-	r = _populate_mpu_rt_base(oh, NULL);
-	if (IS_ERR_VALUE(r)) {
-		WARN(1, "omap_hwmod: %s: couldn't set mpu_rt_base\n", oh_name);
-		return -EINVAL;
-	}
-
-	r = _init_clocks(oh, NULL);
-	if (IS_ERR_VALUE(r)) {
-		WARN(1, "omap_hwmod: %s: couldn't init clocks\n", oh_name);
-		return -EINVAL;
-	}
+	_ensure_mpu_hwmod_is_setup(oh);
 
+	_init(oh, NULL);
 	_setup(oh, NULL);
 
 	return 0;
 }
 
 /**
- * omap_hwmod_setup - do some post-clock framework initialization
+ * omap_hwmod_setup_all - set up all registered IP blocks
  *
- * Must be called after omap2_clk_init().  Resolves the struct clk names
- * to struct clk pointers for each registered omap_hwmod.  Also calls
- * _setup() on each hwmod.  Returns 0 upon success.
+ * Initialize and set up all IP blocks registered with the hwmod code.
+ * Must be called after omap2_clk_init().  Resolves the struct clk
+ * names to struct clk pointers for each registered omap_hwmod.  Also
+ * calls _setup() on each hwmod.  Returns 0 upon success.
  */
 static int __init omap_hwmod_setup_all(void)
 {
-	int r;
-
-	if (!mpu_oh) {
-		pr_err("omap_hwmod: %s: MPU initiator hwmod %s not yet registered\n",
-		       __func__, MPU_INITIATOR_NAME);
-		return -EINVAL;
-	}
-
-	r = omap_hwmod_for_each(_populate_mpu_rt_base, NULL);
-
-	r = omap_hwmod_for_each(_init_clocks, NULL);
-	WARN(IS_ERR_VALUE(r),
-	     "omap_hwmod: %s: _init_clocks failed\n", __func__);
+	_ensure_mpu_hwmod_is_setup(NULL);
 
+	omap_hwmod_for_each(_init, NULL);
 	omap_hwmod_for_each(_setup, NULL);
 
 	return 0;
@@ -2275,6 +2809,10 @@ int omap_hwmod_reset(struct omap_hwmod *oh)
 	return r;
 }
 
+/*
+ * IP block data retrieval functions
+ */
+
 /**
  * omap_hwmod_count_resources - count number of struct resources needed by hwmod
  * @oh: struct omap_hwmod *
@@ -2293,12 +2831,19 @@ int omap_hwmod_reset(struct omap_hwmod *oh)
  */
 int omap_hwmod_count_resources(struct omap_hwmod *oh)
 {
-	int ret, i;
+	struct omap_hwmod_ocp_if *os;
+	struct list_head *p;
+	int ret;
+	int i = 0;
 
 	ret = _count_mpu_irqs(oh) + _count_sdma_reqs(oh);
 
-	for (i = 0; i < oh->slaves_cnt; i++)
-		ret += _count_ocp_if_addr_spaces(oh->slaves[i]);
+	p = oh->slave_ports.next;
+
+	while (i < oh->slaves_cnt) {
+		os = _fetch_next_ocp_if(&p, &i);
+		ret += _count_ocp_if_addr_spaces(os);
+	}
 
 	return ret;
 }
@@ -2315,7 +2860,9 @@ int omap_hwmod_count_resources(struct omap_hwmod *oh)
  */
 int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res)
 {
-	int i, j, mpu_irqs_cnt, sdma_reqs_cnt;
+	struct omap_hwmod_ocp_if *os;
+	struct list_head *p;
+	int i, j, mpu_irqs_cnt, sdma_reqs_cnt, addr_cnt;
 	int r = 0;
 
 	/* For each IRQ, DMA, memory area, fill in array.*/
@@ -2338,11 +2885,11 @@ int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res)
 		r++;
 	}
 
-	for (i = 0; i < oh->slaves_cnt; i++) {
-		struct omap_hwmod_ocp_if *os;
-		int addr_cnt;
+	p = oh->slave_ports.next;
 
-		os = oh->slaves[i];
+	i = 0;
+	while (i < oh->slaves_cnt) {
+		os = _fetch_next_ocp_if(&p, &i);
 		addr_cnt = _count_ocp_if_addr_spaces(os);
 
 		for (j = 0; j < addr_cnt; j++) {
@@ -2358,6 +2905,69 @@ int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res)
 }
 
 /**
+ * omap_hwmod_get_resource_byname - fetch IP block integration data by name
+ * @oh: struct omap_hwmod * to operate on
+ * @type: one of the IORESOURCE_* constants from include/linux/ioport.h
+ * @name: pointer to the name of the data to fetch (optional)
+ * @rsrc: pointer to a struct resource, allocated by the caller
+ *
+ * Retrieve MPU IRQ, SDMA request line, or address space start/end
+ * data for the IP block pointed to by @oh.  The data will be filled
+ * into a struct resource record pointed to by @rsrc.  The struct
+ * resource must be allocated by the caller.  When @name is non-null,
+ * the data associated with the matching entry in the IRQ/SDMA/address
+ * space hwmod data arrays will be returned.  If @name is null, the
+ * first array entry will be returned.  Data order is not meaningful
+ * in hwmod data, so callers are strongly encouraged to use a non-null
+ * @name whenever possible to avoid unpredictable effects if hwmod
+ * data is later added that causes data ordering to change.  This
+ * function is only intended for use by OMAP core code.  Device
+ * drivers should not call this function - the appropriate bus-related
+ * data accessor functions should be used instead.  Returns 0 upon
+ * success or a negative error code upon error.
+ */
+int omap_hwmod_get_resource_byname(struct omap_hwmod *oh, unsigned int type,
+				   const char *name, struct resource *rsrc)
+{
+	int r;
+	unsigned int irq, dma;
+	u32 pa_start, pa_end;
+
+	if (!oh || !rsrc)
+		return -EINVAL;
+
+	if (type == IORESOURCE_IRQ) {
+		r = _get_mpu_irq_by_name(oh, name, &irq);
+		if (r)
+			return r;
+
+		rsrc->start = irq;
+		rsrc->end = irq;
+	} else if (type == IORESOURCE_DMA) {
+		r = _get_sdma_req_by_name(oh, name, &dma);
+		if (r)
+			return r;
+
+		rsrc->start = dma;
+		rsrc->end = dma;
+	} else if (type == IORESOURCE_MEM) {
+		r = _get_addr_space_by_name(oh, name, &pa_start, &pa_end);
+		if (r)
+			return r;
+
+		rsrc->start = pa_start;
+		rsrc->end = pa_end;
+	} else {
+		return -EINVAL;
+	}
+
+	rsrc->flags = type;
+	rsrc->name = name;
+
+	return 0;
+}
+
+/**
  * omap_hwmod_get_pwrdm - return pointer to this module's main powerdomain
  * @oh: struct omap_hwmod *
  *
@@ -2371,6 +2981,7 @@ int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res)
 struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh)
 {
 	struct clk *c;
+	struct omap_hwmod_ocp_if *oi;
 
 	if (!oh)
 		return NULL;
@@ -2378,9 +2989,10 @@ struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh)
 	if (oh->_clk) {
 		c = oh->_clk;
 	} else {
-		if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
+		oi = _find_mpu_rt_port(oh);
+		if (!oi)
 			return NULL;
-		c = oh->slaves[oh->_mpu_port_index]->_clk;
+		c = oi->_clk;
 	}
 
 	if (!c->clkdm)
@@ -2463,26 +3075,28 @@ int omap_hwmod_del_initiator_dep(struct omap_hwmod *oh,
  * @oh: struct omap_hwmod *
  *
  * Sets the module OCP socket ENAWAKEUP bit to allow the module to
- * send wakeups to the PRCM.  Eventually this should sets PRCM wakeup
- * registers to cause the PRCM to receive wakeup events from the
- * module.  Does not set any wakeup routing registers beyond this
- * point - if the module is to wake up any other module or subsystem,
- * that must be set separately.  Called by omap_device code.  Returns
- * -EINVAL on error or 0 upon success.
+ * send wakeups to the PRCM, and enable I/O ring wakeup events for
+ * this IP block if it has dynamic mux entries.  Eventually this
+ * should set PRCM wakeup registers to cause the PRCM to receive
+ * wakeup events from the module.  Does not set any wakeup routing
+ * registers beyond this point - if the module is to wake up any other
+ * module or subsystem, that must be set separately.  Called by
+ * omap_device code.  Returns -EINVAL on error or 0 upon success.
  */
 int omap_hwmod_enable_wakeup(struct omap_hwmod *oh)
 {
 	unsigned long flags;
 	u32 v;
 
-	if (!oh->class->sysc ||
-	    !(oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP))
-		return -EINVAL;
-
 	spin_lock_irqsave(&oh->_lock, flags);
-	v = oh->_sysc_cache;
-	_enable_wakeup(oh, &v);
-	_write_sysconfig(v, oh);
+
+	if (oh->class->sysc &&
+	    (oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP)) {
+		v = oh->_sysc_cache;
+		_enable_wakeup(oh, &v);
+		_write_sysconfig(v, oh);
+	}
+
 	_set_idle_ioring_wakeup(oh, true);
 	spin_unlock_irqrestore(&oh->_lock, flags);
 
@@ -2494,26 +3108,28 @@ int omap_hwmod_enable_wakeup(struct omap_hwmod *oh)
  * @oh: struct omap_hwmod *
  *
  * Clears the module OCP socket ENAWAKEUP bit to prevent the module
- * from sending wakeups to the PRCM.  Eventually this should clear
- * PRCM wakeup registers to cause the PRCM to ignore wakeup events
- * from the module.  Does not set any wakeup routing registers beyond
- * this point - if the module is to wake up any other module or
- * subsystem, that must be set separately.  Called by omap_device
- * code.  Returns -EINVAL on error or 0 upon success.
+ * from sending wakeups to the PRCM, and disable I/O ring wakeup
+ * events for this IP block if it has dynamic mux entries.  Eventually
+ * this should clear PRCM wakeup registers to cause the PRCM to ignore
+ * wakeup events from the module.  Does not set any wakeup routing
+ * registers beyond this point - if the module is to wake up any other
+ * module or subsystem, that must be set separately.  Called by
+ * omap_device code.  Returns -EINVAL on error or 0 upon success.
  */
 int omap_hwmod_disable_wakeup(struct omap_hwmod *oh)
 {
 	unsigned long flags;
 	u32 v;
 
-	if (!oh->class->sysc ||
-	    !(oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP))
-		return -EINVAL;
-
 	spin_lock_irqsave(&oh->_lock, flags);
-	v = oh->_sysc_cache;
-	_disable_wakeup(oh, &v);
-	_write_sysconfig(v, oh);
+
+	if (oh->class->sysc &&
+	    (oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP)) {
+		v = oh->_sysc_cache;
+		_disable_wakeup(oh, &v);
+		_write_sysconfig(v, oh);
+	}
+
 	_set_idle_ioring_wakeup(oh, false);
 	spin_unlock_irqrestore(&oh->_lock, flags);
 
@@ -2650,10 +3266,10 @@ int omap_hwmod_for_each_by_class(const char *classname,
  * @state: state that _setup() should leave the hwmod in
  *
  * Sets the hwmod state that @oh will enter at the end of _setup()
- * (called by omap_hwmod_setup_*()).  Only valid to call between
- * calling omap_hwmod_register() and omap_hwmod_setup_*().  Returns
- * 0 upon success or -EINVAL if there is a problem with the arguments
- * or if the hwmod is in the wrong state.
+ * (called by omap_hwmod_setup_*()).  See also the documentation
+ * for _setup_postsetup(), above.  Returns 0 upon success or
+ * -EINVAL if there is a problem with the arguments or if the hwmod is
+ * in the wrong state.
  */
 int omap_hwmod_set_postsetup_state(struct omap_hwmod *oh, u8 state)
 {
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index a5409ce3f323..a7640d1b215e 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -2,6 +2,7 @@
  * omap_hwmod_2420_data.c - hardware modules present on the OMAP2420 chips
  *
  * Copyright (C) 2009-2011 Nokia Corporation
+ * Copyright (C) 2012 Texas Instruments, Inc.
  * Paul Walmsley
  *
  * This program is free software; you can redistribute it and/or modify
@@ -22,6 +23,7 @@
 #include <plat/dmtimer.h>
 #include <plat/l3_2xxx.h>
 #include <plat/l4_2xxx.h>
+#include <plat/mmc.h>
 
 #include "omap_hwmod_common_data.h"
 
@@ -32,707 +34,329 @@
 /*
  * OMAP2420 hardware module integration data
  *
- * ALl of the data in this section should be autogeneratable from the
+ * All of the data in this section should be autogeneratable from the
  * TI hardware database or other technical documentation.  Data that
  * is driver-specific or driver-kernel integration-specific belongs
  * elsewhere.
  */
 
-static struct omap_hwmod omap2420_mpu_hwmod;
-static struct omap_hwmod omap2420_iva_hwmod;
-static struct omap_hwmod omap2420_l3_main_hwmod;
-static struct omap_hwmod omap2420_l4_core_hwmod;
-static struct omap_hwmod omap2420_dss_core_hwmod;
-static struct omap_hwmod omap2420_dss_dispc_hwmod;
-static struct omap_hwmod omap2420_dss_rfbi_hwmod;
-static struct omap_hwmod omap2420_dss_venc_hwmod;
-static struct omap_hwmod omap2420_wd_timer2_hwmod;
-static struct omap_hwmod omap2420_gpio1_hwmod;
-static struct omap_hwmod omap2420_gpio2_hwmod;
-static struct omap_hwmod omap2420_gpio3_hwmod;
-static struct omap_hwmod omap2420_gpio4_hwmod;
-static struct omap_hwmod omap2420_dma_system_hwmod;
-static struct omap_hwmod omap2420_mcspi1_hwmod;
-static struct omap_hwmod omap2420_mcspi2_hwmod;
-
-/* L3 -> L4_CORE interface */
-static struct omap_hwmod_ocp_if omap2420_l3_main__l4_core = {
-	.master	= &omap2420_l3_main_hwmod,
-	.slave	= &omap2420_l4_core_hwmod,
-	.user	= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* MPU -> L3 interface */
-static struct omap_hwmod_ocp_if omap2420_mpu__l3_main = {
-	.master = &omap2420_mpu_hwmod,
-	.slave	= &omap2420_l3_main_hwmod,
-	.user	= OCP_USER_MPU,
-};
-
-/* Slave interfaces on the L3 interconnect */
-static struct omap_hwmod_ocp_if *omap2420_l3_main_slaves[] = {
-	&omap2420_mpu__l3_main,
-};
-
-/* DSS -> l3 */
-static struct omap_hwmod_ocp_if omap2420_dss__l3 = {
-	.master		= &omap2420_dss_core_hwmod,
-	.slave		= &omap2420_l3_main_hwmod,
-	.fw = {
-		.omap2 = {
-			.l3_perm_bit  = OMAP2_L3_CORE_FW_CONNID_DSS,
-			.flags	= OMAP_FIREWALL_L3,
-		}
-	},
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* Master interfaces on the L3 interconnect */
-static struct omap_hwmod_ocp_if *omap2420_l3_main_masters[] = {
-	&omap2420_l3_main__l4_core,
-};
-
-/* L3 */
-static struct omap_hwmod omap2420_l3_main_hwmod = {
-	.name		= "l3_main",
-	.class		= &l3_hwmod_class,
-	.masters	= omap2420_l3_main_masters,
-	.masters_cnt	= ARRAY_SIZE(omap2420_l3_main_masters),
-	.slaves		= omap2420_l3_main_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_l3_main_slaves),
-	.flags		= HWMOD_NO_IDLEST,
-};
-
-static struct omap_hwmod omap2420_l4_wkup_hwmod;
-static struct omap_hwmod omap2420_uart1_hwmod;
-static struct omap_hwmod omap2420_uart2_hwmod;
-static struct omap_hwmod omap2420_uart3_hwmod;
-static struct omap_hwmod omap2420_i2c1_hwmod;
-static struct omap_hwmod omap2420_i2c2_hwmod;
-static struct omap_hwmod omap2420_mcbsp1_hwmod;
-static struct omap_hwmod omap2420_mcbsp2_hwmod;
-
-/* l4 core -> mcspi1 interface */
-static struct omap_hwmod_ocp_if omap2420_l4_core__mcspi1 = {
-	.master		= &omap2420_l4_core_hwmod,
-	.slave		= &omap2420_mcspi1_hwmod,
-	.clk		= "mcspi1_ick",
-	.addr		= omap2_mcspi1_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4 core -> mcspi2 interface */
-static struct omap_hwmod_ocp_if omap2420_l4_core__mcspi2 = {
-	.master		= &omap2420_l4_core_hwmod,
-	.slave		= &omap2420_mcspi2_hwmod,
-	.clk		= "mcspi2_ick",
-	.addr		= omap2_mcspi2_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* L4_CORE -> L4_WKUP interface */
-static struct omap_hwmod_ocp_if omap2420_l4_core__l4_wkup = {
-	.master	= &omap2420_l4_core_hwmod,
-	.slave	= &omap2420_l4_wkup_hwmod,
-	.user	= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* L4 CORE -> UART1 interface */
-static struct omap_hwmod_ocp_if omap2_l4_core__uart1 = {
-	.master		= &omap2420_l4_core_hwmod,
-	.slave		= &omap2420_uart1_hwmod,
-	.clk		= "uart1_ick",
-	.addr		= omap2xxx_uart1_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* L4 CORE -> UART2 interface */
-static struct omap_hwmod_ocp_if omap2_l4_core__uart2 = {
-	.master		= &omap2420_l4_core_hwmod,
-	.slave		= &omap2420_uart2_hwmod,
-	.clk		= "uart2_ick",
-	.addr		= omap2xxx_uart2_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* L4 PER -> UART3 interface */
-static struct omap_hwmod_ocp_if omap2_l4_core__uart3 = {
-	.master		= &omap2420_l4_core_hwmod,
-	.slave		= &omap2420_uart3_hwmod,
-	.clk		= "uart3_ick",
-	.addr		= omap2xxx_uart3_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* L4 CORE -> I2C1 interface */
-static struct omap_hwmod_ocp_if omap2420_l4_core__i2c1 = {
-	.master		= &omap2420_l4_core_hwmod,
-	.slave		= &omap2420_i2c1_hwmod,
-	.clk		= "i2c1_ick",
-	.addr		= omap2_i2c1_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* L4 CORE -> I2C2 interface */
-static struct omap_hwmod_ocp_if omap2420_l4_core__i2c2 = {
-	.master		= &omap2420_l4_core_hwmod,
-	.slave		= &omap2420_i2c2_hwmod,
-	.clk		= "i2c2_ick",
-	.addr		= omap2_i2c2_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* Slave interfaces on the L4_CORE interconnect */
-static struct omap_hwmod_ocp_if *omap2420_l4_core_slaves[] = {
-	&omap2420_l3_main__l4_core,
-};
-
-/* Master interfaces on the L4_CORE interconnect */
-static struct omap_hwmod_ocp_if *omap2420_l4_core_masters[] = {
-	&omap2420_l4_core__l4_wkup,
-	&omap2_l4_core__uart1,
-	&omap2_l4_core__uart2,
-	&omap2_l4_core__uart3,
-	&omap2420_l4_core__i2c1,
-	&omap2420_l4_core__i2c2
-};
-
-/* L4 CORE */
-static struct omap_hwmod omap2420_l4_core_hwmod = {
-	.name		= "l4_core",
-	.class		= &l4_hwmod_class,
-	.masters	= omap2420_l4_core_masters,
-	.masters_cnt	= ARRAY_SIZE(omap2420_l4_core_masters),
-	.slaves		= omap2420_l4_core_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_l4_core_slaves),
-	.flags		= HWMOD_NO_IDLEST,
-};
-
-/* Slave interfaces on the L4_WKUP interconnect */
-static struct omap_hwmod_ocp_if *omap2420_l4_wkup_slaves[] = {
-	&omap2420_l4_core__l4_wkup,
-};
-
-/* Master interfaces on the L4_WKUP interconnect */
-static struct omap_hwmod_ocp_if *omap2420_l4_wkup_masters[] = {
-};
-
-/* L4 WKUP */
-static struct omap_hwmod omap2420_l4_wkup_hwmod = {
-	.name		= "l4_wkup",
-	.class		= &l4_hwmod_class,
-	.masters	= omap2420_l4_wkup_masters,
-	.masters_cnt	= ARRAY_SIZE(omap2420_l4_wkup_masters),
-	.slaves		= omap2420_l4_wkup_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_l4_wkup_slaves),
-	.flags		= HWMOD_NO_IDLEST,
-};
-
-/* Master interfaces on the MPU device */
-static struct omap_hwmod_ocp_if *omap2420_mpu_masters[] = {
-	&omap2420_mpu__l3_main,
-};
-
-/* MPU */
-static struct omap_hwmod omap2420_mpu_hwmod = {
-	.name		= "mpu",
-	.class		= &mpu_hwmod_class,
-	.main_clk	= "mpu_ck",
-	.masters	= omap2420_mpu_masters,
-	.masters_cnt	= ARRAY_SIZE(omap2420_mpu_masters),
-};
-
 /*
- * IVA1 interface data
+ * IP blocks
  */
 
-/* IVA <- L3 interface */
-static struct omap_hwmod_ocp_if omap2420_l3__iva = {
-	.master		= &omap2420_l3_main_hwmod,
-	.slave		= &omap2420_iva_hwmod,
-	.clk		= "iva1_ifck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+/* IVA1 (IVA1) */
+static struct omap_hwmod_class iva1_hwmod_class = {
+	.name		= "iva1",
 };
 
-static struct omap_hwmod_ocp_if *omap2420_iva_masters[] = {
-	&omap2420_l3__iva,
+static struct omap_hwmod_rst_info omap2420_iva_resets[] = {
+	{ .name = "iva", .rst_shift = 8 },
 };
 
-/*
- * IVA2 (IVA2)
- */
-
 static struct omap_hwmod omap2420_iva_hwmod = {
 	.name		= "iva",
-	.class		= &iva_hwmod_class,
-	.masters	= omap2420_iva_masters,
-	.masters_cnt	= ARRAY_SIZE(omap2420_iva_masters),
-};
-
-/* always-on timers dev attribute */
-static struct omap_timer_capability_dev_attr capability_alwon_dev_attr = {
-	.timer_capability       = OMAP_TIMER_ALWON,
+	.class		= &iva1_hwmod_class,
+	.clkdm_name	= "iva1_clkdm",
+	.rst_lines	= omap2420_iva_resets,
+	.rst_lines_cnt	= ARRAY_SIZE(omap2420_iva_resets),
+	.main_clk	= "iva1_ifck",
 };
 
-/* pwm timers dev attribute */
-static struct omap_timer_capability_dev_attr capability_pwm_dev_attr = {
-	.timer_capability       = OMAP_TIMER_HAS_PWM,
-};
-
-/* timer1 */
-static struct omap_hwmod omap2420_timer1_hwmod;
-
-static struct omap_hwmod_addr_space omap2420_timer1_addrs[] = {
-	{
-		.pa_start	= 0x48028000,
-		.pa_end		= 0x48028000 + SZ_1K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
+/* DSP */
+static struct omap_hwmod_class dsp_hwmod_class = {
+	.name		= "dsp",
 };
 
-/* l4_wkup -> timer1 */
-static struct omap_hwmod_ocp_if omap2420_l4_wkup__timer1 = {
-	.master		= &omap2420_l4_wkup_hwmod,
-	.slave		= &omap2420_timer1_hwmod,
-	.clk		= "gpt1_ick",
-	.addr		= omap2420_timer1_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+static struct omap_hwmod_rst_info omap2420_dsp_resets[] = {
+	{ .name = "logic", .rst_shift = 0 },
+	{ .name = "mmu", .rst_shift = 1 },
 };
 
-/* timer1 slave port */
-static struct omap_hwmod_ocp_if *omap2420_timer1_slaves[] = {
-	&omap2420_l4_wkup__timer1,
+static struct omap_hwmod omap2420_dsp_hwmod = {
+	.name		= "dsp",
+	.class		= &dsp_hwmod_class,
+	.clkdm_name	= "dsp_clkdm",
+	.rst_lines	= omap2420_dsp_resets,
+	.rst_lines_cnt	= ARRAY_SIZE(omap2420_dsp_resets),
+	.main_clk	= "dsp_fck",
 };
 
-/* timer1 hwmod */
-static struct omap_hwmod omap2420_timer1_hwmod = {
-	.name		= "timer1",
-	.mpu_irqs	= omap2_timer1_mpu_irqs,
-	.main_clk	= "gpt1_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_GPT1_SHIFT,
-			.module_offs = WKUP_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_GPT1_SHIFT,
-		},
-	},
-	.dev_attr	= &capability_alwon_dev_attr,
-	.slaves		= omap2420_timer1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_timer1_slaves),
-	.class		= &omap2xxx_timer_hwmod_class,
+/* I2C common */
+static struct omap_hwmod_class_sysconfig i2c_sysc = {
+	.rev_offs	= 0x00,
+	.sysc_offs	= 0x20,
+	.syss_offs	= 0x10,
+	.sysc_flags	= (SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
 };
 
-/* timer2 */
-static struct omap_hwmod omap2420_timer2_hwmod;
-
-/* l4_core -> timer2 */
-static struct omap_hwmod_ocp_if omap2420_l4_core__timer2 = {
-	.master		= &omap2420_l4_core_hwmod,
-	.slave		= &omap2420_timer2_hwmod,
-	.clk		= "gpt2_ick",
-	.addr		= omap2xxx_timer2_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+static struct omap_hwmod_class i2c_class = {
+	.name		= "i2c",
+	.sysc		= &i2c_sysc,
+	.rev		= OMAP_I2C_IP_VERSION_1,
+	.reset		= &omap_i2c_reset,
 };
 
-/* timer2 slave port */
-static struct omap_hwmod_ocp_if *omap2420_timer2_slaves[] = {
-	&omap2420_l4_core__timer2,
+static struct omap_i2c_dev_attr i2c_dev_attr = {
+	.flags		= OMAP_I2C_FLAG_NO_FIFO |
+			  OMAP_I2C_FLAG_SIMPLE_CLOCK |
+			  OMAP_I2C_FLAG_16BIT_DATA_REG |
+			  OMAP_I2C_FLAG_BUS_SHIFT_2,
 };
 
-/* timer2 hwmod */
-static struct omap_hwmod omap2420_timer2_hwmod = {
-	.name		= "timer2",
-	.mpu_irqs	= omap2_timer2_mpu_irqs,
-	.main_clk	= "gpt2_fck",
+/* I2C1 */
+static struct omap_hwmod omap2420_i2c1_hwmod = {
+	.name		= "i2c1",
+	.mpu_irqs	= omap2_i2c1_mpu_irqs,
+	.sdma_reqs	= omap2_i2c1_sdma_reqs,
+	.main_clk	= "i2c1_fck",
 	.prcm		= {
 		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_GPT2_SHIFT,
 			.module_offs = CORE_MOD,
+			.prcm_reg_id = 1,
+			.module_bit = OMAP2420_EN_I2C1_SHIFT,
 			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_GPT2_SHIFT,
+			.idlest_idle_bit = OMAP2420_ST_I2C1_SHIFT,
 		},
 	},
-	.dev_attr	= &capability_alwon_dev_attr,
-	.slaves		= omap2420_timer2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_timer2_slaves),
-	.class		= &omap2xxx_timer_hwmod_class,
-};
-
-/* timer3 */
-static struct omap_hwmod omap2420_timer3_hwmod;
-
-/* l4_core -> timer3 */
-static struct omap_hwmod_ocp_if omap2420_l4_core__timer3 = {
-	.master		= &omap2420_l4_core_hwmod,
-	.slave		= &omap2420_timer3_hwmod,
-	.clk		= "gpt3_ick",
-	.addr		= omap2xxx_timer3_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer3 slave port */
-static struct omap_hwmod_ocp_if *omap2420_timer3_slaves[] = {
-	&omap2420_l4_core__timer3,
+	.class		= &i2c_class,
+	.dev_attr	= &i2c_dev_attr,
+	.flags		= HWMOD_16BIT_REG,
 };
 
-/* timer3 hwmod */
-static struct omap_hwmod omap2420_timer3_hwmod = {
-	.name		= "timer3",
-	.mpu_irqs	= omap2_timer3_mpu_irqs,
-	.main_clk	= "gpt3_fck",
+/* I2C2 */
+static struct omap_hwmod omap2420_i2c2_hwmod = {
+	.name		= "i2c2",
+	.mpu_irqs	= omap2_i2c2_mpu_irqs,
+	.sdma_reqs	= omap2_i2c2_sdma_reqs,
+	.main_clk	= "i2c2_fck",
 	.prcm		= {
 		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_GPT3_SHIFT,
 			.module_offs = CORE_MOD,
+			.prcm_reg_id = 1,
+			.module_bit = OMAP2420_EN_I2C2_SHIFT,
 			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_GPT3_SHIFT,
+			.idlest_idle_bit = OMAP2420_ST_I2C2_SHIFT,
 		},
 	},
-	.dev_attr	= &capability_alwon_dev_attr,
-	.slaves		= omap2420_timer3_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_timer3_slaves),
-	.class		= &omap2xxx_timer_hwmod_class,
+	.class		= &i2c_class,
+	.dev_attr	= &i2c_dev_attr,
+	.flags		= HWMOD_16BIT_REG,
 };
 
-/* timer4 */
-static struct omap_hwmod omap2420_timer4_hwmod;
+/* dma attributes */
+static struct omap_dma_dev_attr dma_dev_attr = {
+	.dev_caps  = RESERVE_CHANNEL | DMA_LINKED_LCH | GLOBAL_PRIORITY |
+						IS_CSSA_32 | IS_CDSA_32,
+	.lch_count = 32,
+};
 
-/* l4_core -> timer4 */
-static struct omap_hwmod_ocp_if omap2420_l4_core__timer4 = {
-	.master		= &omap2420_l4_core_hwmod,
-	.slave		= &omap2420_timer4_hwmod,
-	.clk		= "gpt4_ick",
-	.addr		= omap2xxx_timer4_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+static struct omap_hwmod omap2420_dma_system_hwmod = {
+	.name		= "dma",
+	.class		= &omap2xxx_dma_hwmod_class,
+	.mpu_irqs	= omap2_dma_system_irqs,
+	.main_clk	= "core_l3_ck",
+	.dev_attr	= &dma_dev_attr,
+	.flags		= HWMOD_NO_IDLEST,
 };
 
-/* timer4 slave port */
-static struct omap_hwmod_ocp_if *omap2420_timer4_slaves[] = {
-	&omap2420_l4_core__timer4,
+/* mailbox */
+static struct omap_hwmod_irq_info omap2420_mailbox_irqs[] = {
+	{ .name = "dsp", .irq = 26 },
+	{ .name = "iva", .irq = 34 },
+	{ .irq = -1 }
 };
 
-/* timer4 hwmod */
-static struct omap_hwmod omap2420_timer4_hwmod = {
-	.name		= "timer4",
-	.mpu_irqs	= omap2_timer4_mpu_irqs,
-	.main_clk	= "gpt4_fck",
+static struct omap_hwmod omap2420_mailbox_hwmod = {
+	.name		= "mailbox",
+	.class		= &omap2xxx_mailbox_hwmod_class,
+	.mpu_irqs	= omap2420_mailbox_irqs,
+	.main_clk	= "mailboxes_ick",
 	.prcm		= {
 		.omap2 = {
 			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_GPT4_SHIFT,
+			.module_bit = OMAP24XX_EN_MAILBOXES_SHIFT,
 			.module_offs = CORE_MOD,
 			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_GPT4_SHIFT,
+			.idlest_idle_bit = OMAP24XX_ST_MAILBOXES_SHIFT,
 		},
 	},
-	.dev_attr	= &capability_alwon_dev_attr,
-	.slaves		= omap2420_timer4_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_timer4_slaves),
-	.class		= &omap2xxx_timer_hwmod_class,
 };
 
-/* timer5 */
-static struct omap_hwmod omap2420_timer5_hwmod;
+/*
+ * 'mcbsp' class
+ * multi channel buffered serial port controller
+ */
 
-/* l4_core -> timer5 */
-static struct omap_hwmod_ocp_if omap2420_l4_core__timer5 = {
-	.master		= &omap2420_l4_core_hwmod,
-	.slave		= &omap2420_timer5_hwmod,
-	.clk		= "gpt5_ick",
-	.addr		= omap2xxx_timer5_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+static struct omap_hwmod_class omap2420_mcbsp_hwmod_class = {
+	.name = "mcbsp",
 };
 
-/* timer5 slave port */
-static struct omap_hwmod_ocp_if *omap2420_timer5_slaves[] = {
-	&omap2420_l4_core__timer5,
+/* mcbsp1 */
+static struct omap_hwmod_irq_info omap2420_mcbsp1_irqs[] = {
+	{ .name = "tx", .irq = 59 },
+	{ .name = "rx", .irq = 60 },
+	{ .irq = -1 }
 };
 
-/* timer5 hwmod */
-static struct omap_hwmod omap2420_timer5_hwmod = {
-	.name		= "timer5",
-	.mpu_irqs	= omap2_timer5_mpu_irqs,
-	.main_clk	= "gpt5_fck",
+static struct omap_hwmod omap2420_mcbsp1_hwmod = {
+	.name		= "mcbsp1",
+	.class		= &omap2420_mcbsp_hwmod_class,
+	.mpu_irqs	= omap2420_mcbsp1_irqs,
+	.sdma_reqs	= omap2_mcbsp1_sdma_reqs,
+	.main_clk	= "mcbsp1_fck",
 	.prcm		= {
 		.omap2 = {
 			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_GPT5_SHIFT,
+			.module_bit = OMAP24XX_EN_MCBSP1_SHIFT,
 			.module_offs = CORE_MOD,
 			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_GPT5_SHIFT,
+			.idlest_idle_bit = OMAP24XX_ST_MCBSP1_SHIFT,
 		},
 	},
-	.dev_attr	= &capability_alwon_dev_attr,
-	.slaves		= omap2420_timer5_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_timer5_slaves),
-	.class		= &omap2xxx_timer_hwmod_class,
 };
 
-
-/* timer6 */
-static struct omap_hwmod omap2420_timer6_hwmod;
-
-/* l4_core -> timer6 */
-static struct omap_hwmod_ocp_if omap2420_l4_core__timer6 = {
-	.master		= &omap2420_l4_core_hwmod,
-	.slave		= &omap2420_timer6_hwmod,
-	.clk		= "gpt6_ick",
-	.addr		= omap2xxx_timer6_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer6 slave port */
-static struct omap_hwmod_ocp_if *omap2420_timer6_slaves[] = {
-	&omap2420_l4_core__timer6,
+/* mcbsp2 */
+static struct omap_hwmod_irq_info omap2420_mcbsp2_irqs[] = {
+	{ .name = "tx", .irq = 62 },
+	{ .name = "rx", .irq = 63 },
+	{ .irq = -1 }
 };
 
-/* timer6 hwmod */
-static struct omap_hwmod omap2420_timer6_hwmod = {
-	.name		= "timer6",
-	.mpu_irqs	= omap2_timer6_mpu_irqs,
-	.main_clk	= "gpt6_fck",
+static struct omap_hwmod omap2420_mcbsp2_hwmod = {
+	.name		= "mcbsp2",
+	.class		= &omap2420_mcbsp_hwmod_class,
+	.mpu_irqs	= omap2420_mcbsp2_irqs,
+	.sdma_reqs	= omap2_mcbsp2_sdma_reqs,
+	.main_clk	= "mcbsp2_fck",
 	.prcm		= {
 		.omap2 = {
 			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_GPT6_SHIFT,
+			.module_bit = OMAP24XX_EN_MCBSP2_SHIFT,
 			.module_offs = CORE_MOD,
 			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_GPT6_SHIFT,
+			.idlest_idle_bit = OMAP24XX_ST_MCBSP2_SHIFT,
 		},
 	},
-	.dev_attr	= &capability_alwon_dev_attr,
-	.slaves		= omap2420_timer6_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_timer6_slaves),
-	.class		= &omap2xxx_timer_hwmod_class,
 };
 
-/* timer7 */
-static struct omap_hwmod omap2420_timer7_hwmod;
-
-/* l4_core -> timer7 */
-static struct omap_hwmod_ocp_if omap2420_l4_core__timer7 = {
-	.master		= &omap2420_l4_core_hwmod,
-	.slave		= &omap2420_timer7_hwmod,
-	.clk		= "gpt7_ick",
-	.addr		= omap2xxx_timer7_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer7 slave port */
-static struct omap_hwmod_ocp_if *omap2420_timer7_slaves[] = {
-	&omap2420_l4_core__timer7,
+static struct omap_hwmod_class_sysconfig omap2420_msdi_sysc = {
+	.rev_offs	= 0x3c,
+	.sysc_offs	= 0x64,
+	.syss_offs	= 0x68,
+	.sysc_flags	= (SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
 };
 
-/* timer7 hwmod */
-static struct omap_hwmod omap2420_timer7_hwmod = {
-	.name		= "timer7",
-	.mpu_irqs	= omap2_timer7_mpu_irqs,
-	.main_clk	= "gpt7_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_GPT7_SHIFT,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_GPT7_SHIFT,
-		},
-	},
-	.dev_attr	= &capability_alwon_dev_attr,
-	.slaves		= omap2420_timer7_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_timer7_slaves),
-	.class		= &omap2xxx_timer_hwmod_class,
+static struct omap_hwmod_class omap2420_msdi_hwmod_class = {
+	.name	= "msdi",
+	.sysc	= &omap2420_msdi_sysc,
+	.reset	= &omap_msdi_reset,
 };
 
-/* timer8 */
-static struct omap_hwmod omap2420_timer8_hwmod;
-
-/* l4_core -> timer8 */
-static struct omap_hwmod_ocp_if omap2420_l4_core__timer8 = {
-	.master		= &omap2420_l4_core_hwmod,
-	.slave		= &omap2420_timer8_hwmod,
-	.clk		= "gpt8_ick",
-	.addr		= omap2xxx_timer8_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+/* msdi1 */
+static struct omap_hwmod_irq_info omap2420_msdi1_irqs[] = {
+	{ .irq = 83 },
+	{ .irq = -1 }
 };
 
-/* timer8 slave port */
-static struct omap_hwmod_ocp_if *omap2420_timer8_slaves[] = {
-	&omap2420_l4_core__timer8,
+static struct omap_hwmod_dma_info omap2420_msdi1_sdma_reqs[] = {
+	{ .name = "tx", .dma_req = 61 }, /* OMAP24XX_DMA_MMC1_TX */
+	{ .name = "rx", .dma_req = 62 }, /* OMAP24XX_DMA_MMC1_RX */
+	{ .dma_req = -1 }
 };
 
-/* timer8 hwmod */
-static struct omap_hwmod omap2420_timer8_hwmod = {
-	.name		= "timer8",
-	.mpu_irqs	= omap2_timer8_mpu_irqs,
-	.main_clk	= "gpt8_fck",
+static struct omap_hwmod omap2420_msdi1_hwmod = {
+	.name		= "msdi1",
+	.class		= &omap2420_msdi_hwmod_class,
+	.mpu_irqs	= omap2420_msdi1_irqs,
+	.sdma_reqs	= omap2420_msdi1_sdma_reqs,
+	.main_clk	= "mmc_fck",
 	.prcm		= {
 		.omap2 = {
 			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_GPT8_SHIFT,
+			.module_bit = OMAP2420_EN_MMC_SHIFT,
 			.module_offs = CORE_MOD,
 			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_GPT8_SHIFT,
+			.idlest_idle_bit = OMAP2420_ST_MMC_SHIFT,
 		},
 	},
-	.dev_attr	= &capability_alwon_dev_attr,
-	.slaves		= omap2420_timer8_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_timer8_slaves),
-	.class		= &omap2xxx_timer_hwmod_class,
-};
-
-/* timer9 */
-static struct omap_hwmod omap2420_timer9_hwmod;
-
-/* l4_core -> timer9 */
-static struct omap_hwmod_ocp_if omap2420_l4_core__timer9 = {
-	.master		= &omap2420_l4_core_hwmod,
-	.slave		= &omap2420_timer9_hwmod,
-	.clk		= "gpt9_ick",
-	.addr		= omap2xxx_timer9_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer9 slave port */
-static struct omap_hwmod_ocp_if *omap2420_timer9_slaves[] = {
-	&omap2420_l4_core__timer9,
+	.flags		= HWMOD_16BIT_REG,
 };
 
-/* timer9 hwmod */
-static struct omap_hwmod omap2420_timer9_hwmod = {
-	.name		= "timer9",
-	.mpu_irqs	= omap2_timer9_mpu_irqs,
-	.main_clk	= "gpt9_fck",
+/* HDQ1W/1-wire */
+static struct omap_hwmod omap2420_hdq1w_hwmod = {
+	.name		= "hdq1w",
+	.mpu_irqs	= omap2_hdq1w_mpu_irqs,
+	.main_clk	= "hdq_fck",
 	.prcm		= {
 		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_GPT9_SHIFT,
 			.module_offs = CORE_MOD,
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_HDQ_SHIFT,
 			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_GPT9_SHIFT,
+			.idlest_idle_bit = OMAP24XX_ST_HDQ_SHIFT,
 		},
 	},
-	.dev_attr	= &capability_pwm_dev_attr,
-	.slaves		= omap2420_timer9_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_timer9_slaves),
-	.class		= &omap2xxx_timer_hwmod_class,
+	.class		= &omap2_hdq1w_class,
 };
 
-/* timer10 */
-static struct omap_hwmod omap2420_timer10_hwmod;
+/*
+ * interfaces
+ */
 
-/* l4_core -> timer10 */
-static struct omap_hwmod_ocp_if omap2420_l4_core__timer10 = {
-	.master		= &omap2420_l4_core_hwmod,
-	.slave		= &omap2420_timer10_hwmod,
-	.clk		= "gpt10_ick",
-	.addr		= omap2_timer10_addrs,
+/* L4 CORE -> I2C1 interface */
+static struct omap_hwmod_ocp_if omap2420_l4_core__i2c1 = {
+	.master		= &omap2xxx_l4_core_hwmod,
+	.slave		= &omap2420_i2c1_hwmod,
+	.clk		= "i2c1_ick",
+	.addr		= omap2_i2c1_addr_space,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* timer10 slave port */
-static struct omap_hwmod_ocp_if *omap2420_timer10_slaves[] = {
-	&omap2420_l4_core__timer10,
-};
-
-/* timer10 hwmod */
-static struct omap_hwmod omap2420_timer10_hwmod = {
-	.name		= "timer10",
-	.mpu_irqs	= omap2_timer10_mpu_irqs,
-	.main_clk	= "gpt10_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_GPT10_SHIFT,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_GPT10_SHIFT,
-		},
-	},
-	.dev_attr	= &capability_pwm_dev_attr,
-	.slaves		= omap2420_timer10_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_timer10_slaves),
-	.class		= &omap2xxx_timer_hwmod_class,
+/* L4 CORE -> I2C2 interface */
+static struct omap_hwmod_ocp_if omap2420_l4_core__i2c2 = {
+	.master		= &omap2xxx_l4_core_hwmod,
+	.slave		= &omap2420_i2c2_hwmod,
+	.clk		= "i2c2_ick",
+	.addr		= omap2_i2c2_addr_space,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* timer11 */
-static struct omap_hwmod omap2420_timer11_hwmod;
-
-/* l4_core -> timer11 */
-static struct omap_hwmod_ocp_if omap2420_l4_core__timer11 = {
-	.master		= &omap2420_l4_core_hwmod,
-	.slave		= &omap2420_timer11_hwmod,
-	.clk		= "gpt11_ick",
-	.addr		= omap2_timer11_addrs,
+/* IVA <- L3 interface */
+static struct omap_hwmod_ocp_if omap2420_l3__iva = {
+	.master		= &omap2xxx_l3_main_hwmod,
+	.slave		= &omap2420_iva_hwmod,
+	.clk		= "core_l3_ck",
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* timer11 slave port */
-static struct omap_hwmod_ocp_if *omap2420_timer11_slaves[] = {
-	&omap2420_l4_core__timer11,
+/* DSP <- L3 interface */
+static struct omap_hwmod_ocp_if omap2420_l3__dsp = {
+	.master		= &omap2xxx_l3_main_hwmod,
+	.slave		= &omap2420_dsp_hwmod,
+	.clk		= "dsp_ick",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* timer11 hwmod */
-static struct omap_hwmod omap2420_timer11_hwmod = {
-	.name		= "timer11",
-	.mpu_irqs	= omap2_timer11_mpu_irqs,
-	.main_clk	= "gpt11_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_GPT11_SHIFT,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_GPT11_SHIFT,
-		},
+static struct omap_hwmod_addr_space omap2420_timer1_addrs[] = {
+	{
+		.pa_start	= 0x48028000,
+		.pa_end		= 0x48028000 + SZ_1K - 1,
+		.flags		= ADDR_TYPE_RT
 	},
-	.dev_attr	= &capability_pwm_dev_attr,
-	.slaves		= omap2420_timer11_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_timer11_slaves),
-	.class		= &omap2xxx_timer_hwmod_class,
+	{ }
 };
 
-/* timer12 */
-static struct omap_hwmod omap2420_timer12_hwmod;
-
-/* l4_core -> timer12 */
-static struct omap_hwmod_ocp_if omap2420_l4_core__timer12 = {
-	.master		= &omap2420_l4_core_hwmod,
-	.slave		= &omap2420_timer12_hwmod,
-	.clk		= "gpt12_ick",
-	.addr		= omap2xxx_timer12_addrs,
+/* l4_wkup -> timer1 */
+static struct omap_hwmod_ocp_if omap2420_l4_wkup__timer1 = {
+	.master		= &omap2xxx_l4_wkup_hwmod,
+	.slave		= &omap2xxx_timer1_hwmod,
+	.clk		= "gpt1_ick",
+	.addr		= omap2420_timer1_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* timer12 slave port */
-static struct omap_hwmod_ocp_if *omap2420_timer12_slaves[] = {
-	&omap2420_l4_core__timer12,
-};
-
-/* timer12 hwmod */
-static struct omap_hwmod omap2420_timer12_hwmod = {
-	.name		= "timer12",
-	.mpu_irqs	= omap2xxx_timer12_mpu_irqs,
-	.main_clk	= "gpt12_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_GPT12_SHIFT,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_GPT12_SHIFT,
-		},
-	},
-	.dev_attr	= &capability_pwm_dev_attr,
-	.slaves		= omap2420_timer12_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_timer12_slaves),
-	.class		= &omap2xxx_timer_hwmod_class,
-};
-
 /* l4_wkup -> wd_timer2 */
 static struct omap_hwmod_addr_space omap2420_wd_timer2_addrs[] = {
 	{
@@ -744,364 +368,13 @@ static struct omap_hwmod_addr_space omap2420_wd_timer2_addrs[] = {
 };
 
 static struct omap_hwmod_ocp_if omap2420_l4_wkup__wd_timer2 = {
-	.master		= &omap2420_l4_wkup_hwmod,
-	.slave		= &omap2420_wd_timer2_hwmod,
+	.master		= &omap2xxx_l4_wkup_hwmod,
+	.slave		= &omap2xxx_wd_timer2_hwmod,
 	.clk		= "mpu_wdt_ick",
 	.addr		= omap2420_wd_timer2_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* wd_timer2 */
-static struct omap_hwmod_ocp_if *omap2420_wd_timer2_slaves[] = {
-	&omap2420_l4_wkup__wd_timer2,
-};
-
-static struct omap_hwmod omap2420_wd_timer2_hwmod = {
-	.name		= "wd_timer2",
-	.class		= &omap2xxx_wd_timer_hwmod_class,
-	.main_clk	= "mpu_wdt_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_MPU_WDT_SHIFT,
-			.module_offs = WKUP_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_MPU_WDT_SHIFT,
-		},
-	},
-	.slaves		= omap2420_wd_timer2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_wd_timer2_slaves),
-};
-
-/* UART1 */
-
-static struct omap_hwmod_ocp_if *omap2420_uart1_slaves[] = {
-	&omap2_l4_core__uart1,
-};
-
-static struct omap_hwmod omap2420_uart1_hwmod = {
-	.name		= "uart1",
-	.mpu_irqs	= omap2_uart1_mpu_irqs,
-	.sdma_reqs	= omap2_uart1_sdma_reqs,
-	.main_clk	= "uart1_fck",
-	.prcm		= {
-		.omap2 = {
-			.module_offs = CORE_MOD,
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_UART1_SHIFT,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_EN_UART1_SHIFT,
-		},
-	},
-	.slaves		= omap2420_uart1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_uart1_slaves),
-	.class		= &omap2_uart_class,
-};
-
-/* UART2 */
-
-static struct omap_hwmod_ocp_if *omap2420_uart2_slaves[] = {
-	&omap2_l4_core__uart2,
-};
-
-static struct omap_hwmod omap2420_uart2_hwmod = {
-	.name		= "uart2",
-	.mpu_irqs	= omap2_uart2_mpu_irqs,
-	.sdma_reqs	= omap2_uart2_sdma_reqs,
-	.main_clk	= "uart2_fck",
-	.prcm		= {
-		.omap2 = {
-			.module_offs = CORE_MOD,
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_UART2_SHIFT,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_EN_UART2_SHIFT,
-		},
-	},
-	.slaves		= omap2420_uart2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_uart2_slaves),
-	.class		= &omap2_uart_class,
-};
-
-/* UART3 */
-
-static struct omap_hwmod_ocp_if *omap2420_uart3_slaves[] = {
-	&omap2_l4_core__uart3,
-};
-
-static struct omap_hwmod omap2420_uart3_hwmod = {
-	.name		= "uart3",
-	.mpu_irqs	= omap2_uart3_mpu_irqs,
-	.sdma_reqs	= omap2_uart3_sdma_reqs,
-	.main_clk	= "uart3_fck",
-	.prcm		= {
-		.omap2 = {
-			.module_offs = CORE_MOD,
-			.prcm_reg_id = 2,
-			.module_bit = OMAP24XX_EN_UART3_SHIFT,
-			.idlest_reg_id = 2,
-			.idlest_idle_bit = OMAP24XX_EN_UART3_SHIFT,
-		},
-	},
-	.slaves		= omap2420_uart3_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_uart3_slaves),
-	.class		= &omap2_uart_class,
-};
-
-/* dss */
-/* dss master ports */
-static struct omap_hwmod_ocp_if *omap2420_dss_masters[] = {
-	&omap2420_dss__l3,
-};
-
-/* l4_core -> dss */
-static struct omap_hwmod_ocp_if omap2420_l4_core__dss = {
-	.master		= &omap2420_l4_core_hwmod,
-	.slave		= &omap2420_dss_core_hwmod,
-	.clk		= "dss_ick",
-	.addr		= omap2_dss_addrs,
-	.fw = {
-		.omap2 = {
-			.l4_fw_region  = OMAP2420_L4_CORE_FW_DSS_CORE_REGION,
-			.flags	= OMAP_FIREWALL_L4,
-		}
-	},
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* dss slave ports */
-static struct omap_hwmod_ocp_if *omap2420_dss_slaves[] = {
-	&omap2420_l4_core__dss,
-};
-
-static struct omap_hwmod_opt_clk dss_opt_clks[] = {
-	/*
-	 * The DSS HW needs all DSS clocks enabled during reset. The dss_core
-	 * driver does not use these clocks.
-	 */
-	{ .role = "tv_clk", .clk = "dss_54m_fck" },
-	{ .role = "sys_clk", .clk = "dss2_fck" },
-};
-
-static struct omap_hwmod omap2420_dss_core_hwmod = {
-	.name		= "dss_core",
-	.class		= &omap2_dss_hwmod_class,
-	.main_clk	= "dss1_fck", /* instead of dss_fck */
-	.sdma_reqs	= omap2xxx_dss_sdma_chs,
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_DSS1_SHIFT,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_stdby_bit = OMAP24XX_ST_DSS_SHIFT,
-		},
-	},
-	.opt_clks	= dss_opt_clks,
-	.opt_clks_cnt = ARRAY_SIZE(dss_opt_clks),
-	.slaves		= omap2420_dss_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_dss_slaves),
-	.masters	= omap2420_dss_masters,
-	.masters_cnt	= ARRAY_SIZE(omap2420_dss_masters),
-	.flags		= HWMOD_NO_IDLEST | HWMOD_CONTROL_OPT_CLKS_IN_RESET,
-};
-
-/* l4_core -> dss_dispc */
-static struct omap_hwmod_ocp_if omap2420_l4_core__dss_dispc = {
-	.master		= &omap2420_l4_core_hwmod,
-	.slave		= &omap2420_dss_dispc_hwmod,
-	.clk		= "dss_ick",
-	.addr		= omap2_dss_dispc_addrs,
-	.fw = {
-		.omap2 = {
-			.l4_fw_region  = OMAP2420_L4_CORE_FW_DSS_DISPC_REGION,
-			.flags	= OMAP_FIREWALL_L4,
-		}
-	},
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* dss_dispc slave ports */
-static struct omap_hwmod_ocp_if *omap2420_dss_dispc_slaves[] = {
-	&omap2420_l4_core__dss_dispc,
-};
-
-static struct omap_hwmod omap2420_dss_dispc_hwmod = {
-	.name		= "dss_dispc",
-	.class		= &omap2_dispc_hwmod_class,
-	.mpu_irqs	= omap2_dispc_irqs,
-	.main_clk	= "dss1_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_DSS1_SHIFT,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_stdby_bit = OMAP24XX_ST_DSS_SHIFT,
-		},
-	},
-	.slaves		= omap2420_dss_dispc_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_dss_dispc_slaves),
-	.flags		= HWMOD_NO_IDLEST,
-	.dev_attr	= &omap2_3_dss_dispc_dev_attr
-};
-
-/* l4_core -> dss_rfbi */
-static struct omap_hwmod_ocp_if omap2420_l4_core__dss_rfbi = {
-	.master		= &omap2420_l4_core_hwmod,
-	.slave		= &omap2420_dss_rfbi_hwmod,
-	.clk		= "dss_ick",
-	.addr		= omap2_dss_rfbi_addrs,
-	.fw = {
-		.omap2 = {
-			.l4_fw_region  = OMAP2420_L4_CORE_FW_DSS_CORE_REGION,
-			.flags	= OMAP_FIREWALL_L4,
-		}
-	},
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* dss_rfbi slave ports */
-static struct omap_hwmod_ocp_if *omap2420_dss_rfbi_slaves[] = {
-	&omap2420_l4_core__dss_rfbi,
-};
-
-static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = {
-	{ .role = "ick", .clk = "dss_ick" },
-};
-
-static struct omap_hwmod omap2420_dss_rfbi_hwmod = {
-	.name		= "dss_rfbi",
-	.class		= &omap2_rfbi_hwmod_class,
-	.main_clk	= "dss1_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_DSS1_SHIFT,
-			.module_offs = CORE_MOD,
-		},
-	},
-	.opt_clks	= dss_rfbi_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(dss_rfbi_opt_clks),
-	.slaves		= omap2420_dss_rfbi_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_dss_rfbi_slaves),
-	.flags		= HWMOD_NO_IDLEST,
-};
-
-/* l4_core -> dss_venc */
-static struct omap_hwmod_ocp_if omap2420_l4_core__dss_venc = {
-	.master		= &omap2420_l4_core_hwmod,
-	.slave		= &omap2420_dss_venc_hwmod,
-	.clk		= "dss_ick",
-	.addr		= omap2_dss_venc_addrs,
-	.fw = {
-		.omap2 = {
-			.l4_fw_region  = OMAP2420_L4_CORE_FW_DSS_VENC_REGION,
-			.flags	= OMAP_FIREWALL_L4,
-		}
-	},
-	.flags		= OCPIF_SWSUP_IDLE,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* dss_venc slave ports */
-static struct omap_hwmod_ocp_if *omap2420_dss_venc_slaves[] = {
-	&omap2420_l4_core__dss_venc,
-};
-
-static struct omap_hwmod omap2420_dss_venc_hwmod = {
-	.name		= "dss_venc",
-	.class		= &omap2_venc_hwmod_class,
-	.main_clk	= "dss_54m_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_DSS1_SHIFT,
-			.module_offs = CORE_MOD,
-		},
-	},
-	.slaves		= omap2420_dss_venc_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_dss_venc_slaves),
-	.flags		= HWMOD_NO_IDLEST,
-};
-
-/* I2C common */
-static struct omap_hwmod_class_sysconfig i2c_sysc = {
-	.rev_offs	= 0x00,
-	.sysc_offs	= 0x20,
-	.syss_offs	= 0x10,
-	.sysc_flags	= (SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class i2c_class = {
-	.name		= "i2c",
-	.sysc		= &i2c_sysc,
-	.rev		= OMAP_I2C_IP_VERSION_1,
-	.reset		= &omap_i2c_reset,
-};
-
-static struct omap_i2c_dev_attr i2c_dev_attr = {
-	.flags		= OMAP_I2C_FLAG_NO_FIFO |
-			  OMAP_I2C_FLAG_SIMPLE_CLOCK |
-			  OMAP_I2C_FLAG_16BIT_DATA_REG |
-			  OMAP_I2C_FLAG_BUS_SHIFT_2,
-};
-
-/* I2C1 */
-
-static struct omap_hwmod_ocp_if *omap2420_i2c1_slaves[] = {
-	&omap2420_l4_core__i2c1,
-};
-
-static struct omap_hwmod omap2420_i2c1_hwmod = {
-	.name		= "i2c1",
-	.mpu_irqs	= omap2_i2c1_mpu_irqs,
-	.sdma_reqs	= omap2_i2c1_sdma_reqs,
-	.main_clk	= "i2c1_fck",
-	.prcm		= {
-		.omap2 = {
-			.module_offs = CORE_MOD,
-			.prcm_reg_id = 1,
-			.module_bit = OMAP2420_EN_I2C1_SHIFT,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP2420_ST_I2C1_SHIFT,
-		},
-	},
-	.slaves		= omap2420_i2c1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_i2c1_slaves),
-	.class		= &i2c_class,
-	.dev_attr	= &i2c_dev_attr,
-	.flags		= HWMOD_16BIT_REG,
-};
-
-/* I2C2 */
-
-static struct omap_hwmod_ocp_if *omap2420_i2c2_slaves[] = {
-	&omap2420_l4_core__i2c2,
-};
-
-static struct omap_hwmod omap2420_i2c2_hwmod = {
-	.name		= "i2c2",
-	.mpu_irqs	= omap2_i2c2_mpu_irqs,
-	.sdma_reqs	= omap2_i2c2_sdma_reqs,
-	.main_clk	= "i2c2_fck",
-	.prcm		= {
-		.omap2 = {
-			.module_offs = CORE_MOD,
-			.prcm_reg_id = 1,
-			.module_bit = OMAP2420_EN_I2C2_SHIFT,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP2420_ST_I2C2_SHIFT,
-		},
-	},
-	.slaves		= omap2420_i2c2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_i2c2_slaves),
-	.class		= &i2c_class,
-	.dev_attr	= &i2c_dev_attr,
-	.flags		= HWMOD_16BIT_REG,
-};
-
 /* l4_wkup -> gpio1 */
 static struct omap_hwmod_addr_space omap2420_gpio1_addr_space[] = {
 	{
@@ -1113,8 +386,8 @@ static struct omap_hwmod_addr_space omap2420_gpio1_addr_space[] = {
 };
 
 static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio1 = {
-	.master		= &omap2420_l4_wkup_hwmod,
-	.slave		= &omap2420_gpio1_hwmod,
+	.master		= &omap2xxx_l4_wkup_hwmod,
+	.slave		= &omap2xxx_gpio1_hwmod,
 	.clk		= "gpios_ick",
 	.addr		= omap2420_gpio1_addr_space,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
@@ -1131,8 +404,8 @@ static struct omap_hwmod_addr_space omap2420_gpio2_addr_space[] = {
 };
 
 static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio2 = {
-	.master		= &omap2420_l4_wkup_hwmod,
-	.slave		= &omap2420_gpio2_hwmod,
+	.master		= &omap2xxx_l4_wkup_hwmod,
+	.slave		= &omap2xxx_gpio2_hwmod,
 	.clk		= "gpios_ick",
 	.addr		= omap2420_gpio2_addr_space,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
@@ -1149,8 +422,8 @@ static struct omap_hwmod_addr_space omap2420_gpio3_addr_space[] = {
 };
 
 static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio3 = {
-	.master		= &omap2420_l4_wkup_hwmod,
-	.slave		= &omap2420_gpio3_hwmod,
+	.master		= &omap2xxx_l4_wkup_hwmod,
+	.slave		= &omap2xxx_gpio3_hwmod,
 	.clk		= "gpios_ick",
 	.addr		= omap2420_gpio3_addr_space,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
@@ -1167,408 +440,150 @@ static struct omap_hwmod_addr_space omap2420_gpio4_addr_space[] = {
 };
 
 static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio4 = {
-	.master		= &omap2420_l4_wkup_hwmod,
-	.slave		= &omap2420_gpio4_hwmod,
+	.master		= &omap2xxx_l4_wkup_hwmod,
+	.slave		= &omap2xxx_gpio4_hwmod,
 	.clk		= "gpios_ick",
 	.addr		= omap2420_gpio4_addr_space,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* gpio dev_attr */
-static struct omap_gpio_dev_attr gpio_dev_attr = {
-	.bank_width = 32,
-	.dbck_flag = false,
-};
-
-/* gpio1 */
-static struct omap_hwmod_ocp_if *omap2420_gpio1_slaves[] = {
-	&omap2420_l4_wkup__gpio1,
-};
-
-static struct omap_hwmod omap2420_gpio1_hwmod = {
-	.name		= "gpio1",
-	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
-	.mpu_irqs	= omap2_gpio1_irqs,
-	.main_clk	= "gpios_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_GPIOS_SHIFT,
-			.module_offs = WKUP_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT,
-		},
-	},
-	.slaves		= omap2420_gpio1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_gpio1_slaves),
-	.class		= &omap2xxx_gpio_hwmod_class,
-	.dev_attr	= &gpio_dev_attr,
-};
-
-/* gpio2 */
-static struct omap_hwmod_ocp_if *omap2420_gpio2_slaves[] = {
-	&omap2420_l4_wkup__gpio2,
-};
-
-static struct omap_hwmod omap2420_gpio2_hwmod = {
-	.name		= "gpio2",
-	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
-	.mpu_irqs	= omap2_gpio2_irqs,
-	.main_clk	= "gpios_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_GPIOS_SHIFT,
-			.module_offs = WKUP_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT,
-		},
-	},
-	.slaves		= omap2420_gpio2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_gpio2_slaves),
-	.class		= &omap2xxx_gpio_hwmod_class,
-	.dev_attr	= &gpio_dev_attr,
-};
-
-/* gpio3 */
-static struct omap_hwmod_ocp_if *omap2420_gpio3_slaves[] = {
-	&omap2420_l4_wkup__gpio3,
-};
-
-static struct omap_hwmod omap2420_gpio3_hwmod = {
-	.name		= "gpio3",
-	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
-	.mpu_irqs	= omap2_gpio3_irqs,
-	.main_clk	= "gpios_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_GPIOS_SHIFT,
-			.module_offs = WKUP_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT,
-		},
-	},
-	.slaves		= omap2420_gpio3_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_gpio3_slaves),
-	.class		= &omap2xxx_gpio_hwmod_class,
-	.dev_attr	= &gpio_dev_attr,
-};
-
-/* gpio4 */
-static struct omap_hwmod_ocp_if *omap2420_gpio4_slaves[] = {
-	&omap2420_l4_wkup__gpio4,
-};
-
-static struct omap_hwmod omap2420_gpio4_hwmod = {
-	.name		= "gpio4",
-	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
-	.mpu_irqs	= omap2_gpio4_irqs,
-	.main_clk	= "gpios_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_GPIOS_SHIFT,
-			.module_offs = WKUP_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT,
-		},
-	},
-	.slaves		= omap2420_gpio4_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_gpio4_slaves),
-	.class		= &omap2xxx_gpio_hwmod_class,
-	.dev_attr	= &gpio_dev_attr,
-};
-
-/* dma attributes */
-static struct omap_dma_dev_attr dma_dev_attr = {
-	.dev_caps  = RESERVE_CHANNEL | DMA_LINKED_LCH | GLOBAL_PRIORITY |
-						IS_CSSA_32 | IS_CDSA_32,
-	.lch_count = 32,
-};
-
 /* dma_system -> L3 */
 static struct omap_hwmod_ocp_if omap2420_dma_system__l3 = {
 	.master		= &omap2420_dma_system_hwmod,
-	.slave		= &omap2420_l3_main_hwmod,
+	.slave		= &omap2xxx_l3_main_hwmod,
 	.clk		= "core_l3_ck",
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* dma_system master ports */
-static struct omap_hwmod_ocp_if *omap2420_dma_system_masters[] = {
-	&omap2420_dma_system__l3,
-};
-
 /* l4_core -> dma_system */
 static struct omap_hwmod_ocp_if omap2420_l4_core__dma_system = {
-	.master		= &omap2420_l4_core_hwmod,
+	.master		= &omap2xxx_l4_core_hwmod,
 	.slave		= &omap2420_dma_system_hwmod,
 	.clk		= "sdma_ick",
 	.addr		= omap2_dma_system_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* dma_system slave ports */
-static struct omap_hwmod_ocp_if *omap2420_dma_system_slaves[] = {
-	&omap2420_l4_core__dma_system,
-};
-
-static struct omap_hwmod omap2420_dma_system_hwmod = {
-	.name		= "dma",
-	.class		= &omap2xxx_dma_hwmod_class,
-	.mpu_irqs	= omap2_dma_system_irqs,
-	.main_clk	= "core_l3_ck",
-	.slaves		= omap2420_dma_system_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_dma_system_slaves),
-	.masters	= omap2420_dma_system_masters,
-	.masters_cnt	= ARRAY_SIZE(omap2420_dma_system_masters),
-	.dev_attr	= &dma_dev_attr,
-	.flags		= HWMOD_NO_IDLEST,
-};
-
-/* mailbox */
-static struct omap_hwmod omap2420_mailbox_hwmod;
-static struct omap_hwmod_irq_info omap2420_mailbox_irqs[] = {
-	{ .name = "dsp", .irq = 26 },
-	{ .name = "iva", .irq = 34 },
-	{ .irq = -1 }
-};
-
 /* l4_core -> mailbox */
 static struct omap_hwmod_ocp_if omap2420_l4_core__mailbox = {
-	.master		= &omap2420_l4_core_hwmod,
+	.master		= &omap2xxx_l4_core_hwmod,
 	.slave		= &omap2420_mailbox_hwmod,
 	.addr		= omap2_mailbox_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* mailbox slave ports */
-static struct omap_hwmod_ocp_if *omap2420_mailbox_slaves[] = {
-	&omap2420_l4_core__mailbox,
-};
-
-static struct omap_hwmod omap2420_mailbox_hwmod = {
-	.name		= "mailbox",
-	.class		= &omap2xxx_mailbox_hwmod_class,
-	.mpu_irqs	= omap2420_mailbox_irqs,
-	.main_clk	= "mailboxes_ick",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_MAILBOXES_SHIFT,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_MAILBOXES_SHIFT,
-		},
-	},
-	.slaves		= omap2420_mailbox_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_mailbox_slaves),
-};
-
-/* mcspi1 */
-static struct omap_hwmod_ocp_if *omap2420_mcspi1_slaves[] = {
-	&omap2420_l4_core__mcspi1,
-};
-
-static struct omap2_mcspi_dev_attr omap_mcspi1_dev_attr = {
-	.num_chipselect = 4,
-};
-
-static struct omap_hwmod omap2420_mcspi1_hwmod = {
-	.name		= "mcspi1_hwmod",
-	.mpu_irqs	= omap2_mcspi1_mpu_irqs,
-	.sdma_reqs	= omap2_mcspi1_sdma_reqs,
-	.main_clk	= "mcspi1_fck",
-	.prcm		= {
-		.omap2 = {
-			.module_offs = CORE_MOD,
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_MCSPI1_SHIFT,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_MCSPI1_SHIFT,
-		},
-	},
-	.slaves		= omap2420_mcspi1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_mcspi1_slaves),
-	.class		= &omap2xxx_mcspi_class,
-	.dev_attr	= &omap_mcspi1_dev_attr,
-};
-
-/* mcspi2 */
-static struct omap_hwmod_ocp_if *omap2420_mcspi2_slaves[] = {
-	&omap2420_l4_core__mcspi2,
-};
-
-static struct omap2_mcspi_dev_attr omap_mcspi2_dev_attr = {
-	.num_chipselect = 2,
-};
-
-static struct omap_hwmod omap2420_mcspi2_hwmod = {
-	.name		= "mcspi2_hwmod",
-	.mpu_irqs	= omap2_mcspi2_mpu_irqs,
-	.sdma_reqs	= omap2_mcspi2_sdma_reqs,
-	.main_clk	= "mcspi2_fck",
-	.prcm		= {
-		.omap2 = {
-			.module_offs = CORE_MOD,
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_MCSPI2_SHIFT,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_MCSPI2_SHIFT,
-		},
-	},
-	.slaves		= omap2420_mcspi2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_mcspi2_slaves),
-	.class		= &omap2xxx_mcspi_class,
-	.dev_attr	= &omap_mcspi2_dev_attr,
-};
-
-/*
- * 'mcbsp' class
- * multi channel buffered serial port controller
- */
-
-static struct omap_hwmod_class omap2420_mcbsp_hwmod_class = {
-	.name = "mcbsp",
-};
-
-/* mcbsp1 */
-static struct omap_hwmod_irq_info omap2420_mcbsp1_irqs[] = {
-	{ .name = "tx", .irq = 59 },
-	{ .name = "rx", .irq = 60 },
-	{ .irq = -1 }
-};
-
 /* l4_core -> mcbsp1 */
 static struct omap_hwmod_ocp_if omap2420_l4_core__mcbsp1 = {
-	.master		= &omap2420_l4_core_hwmod,
+	.master		= &omap2xxx_l4_core_hwmod,
 	.slave		= &omap2420_mcbsp1_hwmod,
 	.clk		= "mcbsp1_ick",
 	.addr		= omap2_mcbsp1_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* mcbsp1 slave ports */
-static struct omap_hwmod_ocp_if *omap2420_mcbsp1_slaves[] = {
-	&omap2420_l4_core__mcbsp1,
-};
-
-static struct omap_hwmod omap2420_mcbsp1_hwmod = {
-	.name		= "mcbsp1",
-	.class		= &omap2420_mcbsp_hwmod_class,
-	.mpu_irqs	= omap2420_mcbsp1_irqs,
-	.sdma_reqs	= omap2_mcbsp1_sdma_reqs,
-	.main_clk	= "mcbsp1_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_MCBSP1_SHIFT,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_MCBSP1_SHIFT,
-		},
-	},
-	.slaves		= omap2420_mcbsp1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_mcbsp1_slaves),
-};
-
-/* mcbsp2 */
-static struct omap_hwmod_irq_info omap2420_mcbsp2_irqs[] = {
-	{ .name = "tx", .irq = 62 },
-	{ .name = "rx", .irq = 63 },
-	{ .irq = -1 }
-};
-
 /* l4_core -> mcbsp2 */
 static struct omap_hwmod_ocp_if omap2420_l4_core__mcbsp2 = {
-	.master		= &omap2420_l4_core_hwmod,
+	.master		= &omap2xxx_l4_core_hwmod,
 	.slave		= &omap2420_mcbsp2_hwmod,
 	.clk		= "mcbsp2_ick",
 	.addr		= omap2xxx_mcbsp2_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* mcbsp2 slave ports */
-static struct omap_hwmod_ocp_if *omap2420_mcbsp2_slaves[] = {
-	&omap2420_l4_core__mcbsp2,
-};
-
-static struct omap_hwmod omap2420_mcbsp2_hwmod = {
-	.name		= "mcbsp2",
-	.class		= &omap2420_mcbsp_hwmod_class,
-	.mpu_irqs	= omap2420_mcbsp2_irqs,
-	.sdma_reqs	= omap2_mcbsp2_sdma_reqs,
-	.main_clk	= "mcbsp2_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_MCBSP2_SHIFT,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_MCBSP2_SHIFT,
-		},
+static struct omap_hwmod_addr_space omap2420_msdi1_addrs[] = {
+	{
+		.pa_start	= 0x4809c000,
+		.pa_end		= 0x4809c000 + SZ_128 - 1,
+		.flags		= ADDR_TYPE_RT,
 	},
-	.slaves		= omap2420_mcbsp2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_mcbsp2_slaves),
+	{ }
 };
 
-static __initdata struct omap_hwmod *omap2420_hwmods[] = {
-	&omap2420_l3_main_hwmod,
-	&omap2420_l4_core_hwmod,
-	&omap2420_l4_wkup_hwmod,
-	&omap2420_mpu_hwmod,
-	&omap2420_iva_hwmod,
-
-	&omap2420_timer1_hwmod,
-	&omap2420_timer2_hwmod,
-	&omap2420_timer3_hwmod,
-	&omap2420_timer4_hwmod,
-	&omap2420_timer5_hwmod,
-	&omap2420_timer6_hwmod,
-	&omap2420_timer7_hwmod,
-	&omap2420_timer8_hwmod,
-	&omap2420_timer9_hwmod,
-	&omap2420_timer10_hwmod,
-	&omap2420_timer11_hwmod,
-	&omap2420_timer12_hwmod,
-
-	&omap2420_wd_timer2_hwmod,
-	&omap2420_uart1_hwmod,
-	&omap2420_uart2_hwmod,
-	&omap2420_uart3_hwmod,
-	/* dss class */
-	&omap2420_dss_core_hwmod,
-	&omap2420_dss_dispc_hwmod,
-	&omap2420_dss_rfbi_hwmod,
-	&omap2420_dss_venc_hwmod,
-	/* i2c class */
-	&omap2420_i2c1_hwmod,
-	&omap2420_i2c2_hwmod,
+/* l4_core -> msdi1 */
+static struct omap_hwmod_ocp_if omap2420_l4_core__msdi1 = {
+	.master		= &omap2xxx_l4_core_hwmod,
+	.slave		= &omap2420_msdi1_hwmod,
+	.clk		= "mmc_ick",
+	.addr		= omap2420_msdi1_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
 
-	/* gpio class */
-	&omap2420_gpio1_hwmod,
-	&omap2420_gpio2_hwmod,
-	&omap2420_gpio3_hwmod,
-	&omap2420_gpio4_hwmod,
+/* l4_core -> hdq1w interface */
+static struct omap_hwmod_ocp_if omap2420_l4_core__hdq1w = {
+	.master		= &omap2xxx_l4_core_hwmod,
+	.slave		= &omap2420_hdq1w_hwmod,
+	.clk		= "hdq_ick",
+	.addr		= omap2_hdq1w_addr_space,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+	.flags		= OMAP_FIREWALL_L4 | OCPIF_SWSUP_IDLE,
+};
 
-	/* dma_system class*/
-	&omap2420_dma_system_hwmod,
 
-	/* mailbox class */
-	&omap2420_mailbox_hwmod,
+/* l4_wkup -> 32ksync_counter */
+static struct omap_hwmod_addr_space omap2420_counter_32k_addrs[] = {
+	{
+		.pa_start	= 0x48004000,
+		.pa_end		= 0x4800401f,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
 
-	/* mcbsp class */
-	&omap2420_mcbsp1_hwmod,
-	&omap2420_mcbsp2_hwmod,
+static struct omap_hwmod_ocp_if omap2420_l4_wkup__counter_32k = {
+	.master		= &omap2xxx_l4_wkup_hwmod,
+	.slave		= &omap2xxx_counter_32k_hwmod,
+	.clk		= "sync_32k_ick",
+	.addr		= omap2420_counter_32k_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
 
-	/* mcspi class */
-	&omap2420_mcspi1_hwmod,
-	&omap2420_mcspi2_hwmod,
+static struct omap_hwmod_ocp_if *omap2420_hwmod_ocp_ifs[] __initdata = {
+	&omap2xxx_l3_main__l4_core,
+	&omap2xxx_mpu__l3_main,
+	&omap2xxx_dss__l3,
+	&omap2xxx_l4_core__mcspi1,
+	&omap2xxx_l4_core__mcspi2,
+	&omap2xxx_l4_core__l4_wkup,
+	&omap2_l4_core__uart1,
+	&omap2_l4_core__uart2,
+	&omap2_l4_core__uart3,
+	&omap2420_l4_core__i2c1,
+	&omap2420_l4_core__i2c2,
+	&omap2420_l3__iva,
+	&omap2420_l3__dsp,
+	&omap2420_l4_wkup__timer1,
+	&omap2xxx_l4_core__timer2,
+	&omap2xxx_l4_core__timer3,
+	&omap2xxx_l4_core__timer4,
+	&omap2xxx_l4_core__timer5,
+	&omap2xxx_l4_core__timer6,
+	&omap2xxx_l4_core__timer7,
+	&omap2xxx_l4_core__timer8,
+	&omap2xxx_l4_core__timer9,
+	&omap2xxx_l4_core__timer10,
+	&omap2xxx_l4_core__timer11,
+	&omap2xxx_l4_core__timer12,
+	&omap2420_l4_wkup__wd_timer2,
+	&omap2xxx_l4_core__dss,
+	&omap2xxx_l4_core__dss_dispc,
+	&omap2xxx_l4_core__dss_rfbi,
+	&omap2xxx_l4_core__dss_venc,
+	&omap2420_l4_wkup__gpio1,
+	&omap2420_l4_wkup__gpio2,
+	&omap2420_l4_wkup__gpio3,
+	&omap2420_l4_wkup__gpio4,
+	&omap2420_dma_system__l3,
+	&omap2420_l4_core__dma_system,
+	&omap2420_l4_core__mailbox,
+	&omap2420_l4_core__mcbsp1,
+	&omap2420_l4_core__mcbsp2,
+	&omap2420_l4_core__msdi1,
+	&omap2420_l4_core__hdq1w,
+	&omap2420_l4_wkup__counter_32k,
 	NULL,
 };
 
 int __init omap2420_hwmod_init(void)
 {
-	return omap_hwmod_register(omap2420_hwmods);
+	return omap_hwmod_register_links(omap2420_hwmod_ocp_ifs);
 }
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index c4f56cb60d7d..4d7264981230 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -2,6 +2,7 @@
  * omap_hwmod_2430_data.c - hardware modules present on the OMAP2430 chips
  *
  * Copyright (C) 2009-2011 Nokia Corporation
+ * Copyright (C) 2012 Texas Instruments, Inc.
  * Paul Walmsley
  *
  * This program is free software; you can redistribute it and/or modify
@@ -33,1045 +34,29 @@
 /*
  * OMAP2430 hardware module integration data
  *
- * ALl of the data in this section should be autogeneratable from the
+ * All of the data in this section should be autogeneratable from the
  * TI hardware database or other technical documentation.  Data that
  * is driver-specific or driver-kernel integration-specific belongs
  * elsewhere.
  */
 
-static struct omap_hwmod omap2430_mpu_hwmod;
-static struct omap_hwmod omap2430_iva_hwmod;
-static struct omap_hwmod omap2430_l3_main_hwmod;
-static struct omap_hwmod omap2430_l4_core_hwmod;
-static struct omap_hwmod omap2430_dss_core_hwmod;
-static struct omap_hwmod omap2430_dss_dispc_hwmod;
-static struct omap_hwmod omap2430_dss_rfbi_hwmod;
-static struct omap_hwmod omap2430_dss_venc_hwmod;
-static struct omap_hwmod omap2430_wd_timer2_hwmod;
-static struct omap_hwmod omap2430_gpio1_hwmod;
-static struct omap_hwmod omap2430_gpio2_hwmod;
-static struct omap_hwmod omap2430_gpio3_hwmod;
-static struct omap_hwmod omap2430_gpio4_hwmod;
-static struct omap_hwmod omap2430_gpio5_hwmod;
-static struct omap_hwmod omap2430_dma_system_hwmod;
-static struct omap_hwmod omap2430_mcbsp1_hwmod;
-static struct omap_hwmod omap2430_mcbsp2_hwmod;
-static struct omap_hwmod omap2430_mcbsp3_hwmod;
-static struct omap_hwmod omap2430_mcbsp4_hwmod;
-static struct omap_hwmod omap2430_mcbsp5_hwmod;
-static struct omap_hwmod omap2430_mcspi1_hwmod;
-static struct omap_hwmod omap2430_mcspi2_hwmod;
-static struct omap_hwmod omap2430_mcspi3_hwmod;
-static struct omap_hwmod omap2430_mmc1_hwmod;
-static struct omap_hwmod omap2430_mmc2_hwmod;
-
-/* L3 -> L4_CORE interface */
-static struct omap_hwmod_ocp_if omap2430_l3_main__l4_core = {
-	.master	= &omap2430_l3_main_hwmod,
-	.slave	= &omap2430_l4_core_hwmod,
-	.user	= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* MPU -> L3 interface */
-static struct omap_hwmod_ocp_if omap2430_mpu__l3_main = {
-	.master = &omap2430_mpu_hwmod,
-	.slave	= &omap2430_l3_main_hwmod,
-	.user	= OCP_USER_MPU,
-};
-
-/* Slave interfaces on the L3 interconnect */
-static struct omap_hwmod_ocp_if *omap2430_l3_main_slaves[] = {
-	&omap2430_mpu__l3_main,
-};
-
-/* DSS -> l3 */
-static struct omap_hwmod_ocp_if omap2430_dss__l3 = {
-	.master		= &omap2430_dss_core_hwmod,
-	.slave		= &omap2430_l3_main_hwmod,
-	.fw = {
-		.omap2 = {
-			.l3_perm_bit  = OMAP2_L3_CORE_FW_CONNID_DSS,
-			.flags	= OMAP_FIREWALL_L3,
-		}
-	},
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* Master interfaces on the L3 interconnect */
-static struct omap_hwmod_ocp_if *omap2430_l3_main_masters[] = {
-	&omap2430_l3_main__l4_core,
-};
-
-/* L3 */
-static struct omap_hwmod omap2430_l3_main_hwmod = {
-	.name		= "l3_main",
-	.class		= &l3_hwmod_class,
-	.masters	= omap2430_l3_main_masters,
-	.masters_cnt	= ARRAY_SIZE(omap2430_l3_main_masters),
-	.slaves		= omap2430_l3_main_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_l3_main_slaves),
-	.flags		= HWMOD_NO_IDLEST,
-};
-
-static struct omap_hwmod omap2430_l4_wkup_hwmod;
-static struct omap_hwmod omap2430_uart1_hwmod;
-static struct omap_hwmod omap2430_uart2_hwmod;
-static struct omap_hwmod omap2430_uart3_hwmod;
-static struct omap_hwmod omap2430_i2c1_hwmod;
-static struct omap_hwmod omap2430_i2c2_hwmod;
-
-static struct omap_hwmod omap2430_usbhsotg_hwmod;
-
-/* l3_core -> usbhsotg  interface */
-static struct omap_hwmod_ocp_if omap2430_usbhsotg__l3 = {
-	.master		= &omap2430_usbhsotg_hwmod,
-	.slave		= &omap2430_l3_main_hwmod,
-	.clk		= "core_l3_ck",
-	.user		= OCP_USER_MPU,
-};
-
-/* L4 CORE -> I2C1 interface */
-static struct omap_hwmod_ocp_if omap2430_l4_core__i2c1 = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_i2c1_hwmod,
-	.clk		= "i2c1_ick",
-	.addr		= omap2_i2c1_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* L4 CORE -> I2C2 interface */
-static struct omap_hwmod_ocp_if omap2430_l4_core__i2c2 = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_i2c2_hwmod,
-	.clk		= "i2c2_ick",
-	.addr		= omap2_i2c2_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* L4_CORE -> L4_WKUP interface */
-static struct omap_hwmod_ocp_if omap2430_l4_core__l4_wkup = {
-	.master	= &omap2430_l4_core_hwmod,
-	.slave	= &omap2430_l4_wkup_hwmod,
-	.user	= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* L4 CORE -> UART1 interface */
-static struct omap_hwmod_ocp_if omap2_l4_core__uart1 = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_uart1_hwmod,
-	.clk		= "uart1_ick",
-	.addr		= omap2xxx_uart1_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* L4 CORE -> UART2 interface */
-static struct omap_hwmod_ocp_if omap2_l4_core__uart2 = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_uart2_hwmod,
-	.clk		= "uart2_ick",
-	.addr		= omap2xxx_uart2_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* L4 PER -> UART3 interface */
-static struct omap_hwmod_ocp_if omap2_l4_core__uart3 = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_uart3_hwmod,
-	.clk		= "uart3_ick",
-	.addr		= omap2xxx_uart3_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/*
-* usbhsotg interface data
-*/
-static struct omap_hwmod_addr_space omap2430_usbhsotg_addrs[] = {
-	{
-		.pa_start	= OMAP243X_HS_BASE,
-		.pa_end		= OMAP243X_HS_BASE + SZ_4K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/*  l4_core ->usbhsotg  interface */
-static struct omap_hwmod_ocp_if omap2430_l4_core__usbhsotg = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_usbhsotg_hwmod,
-	.clk		= "usb_l4_ick",
-	.addr		= omap2430_usbhsotg_addrs,
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if *omap2430_usbhsotg_masters[] = {
-	&omap2430_usbhsotg__l3,
-};
-
-static struct omap_hwmod_ocp_if *omap2430_usbhsotg_slaves[] = {
-	&omap2430_l4_core__usbhsotg,
-};
-
-/* L4 CORE -> MMC1 interface */
-static struct omap_hwmod_ocp_if omap2430_l4_core__mmc1 = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_mmc1_hwmod,
-	.clk		= "mmchs1_ick",
-	.addr		= omap2430_mmc1_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* L4 CORE -> MMC2 interface */
-static struct omap_hwmod_ocp_if omap2430_l4_core__mmc2 = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_mmc2_hwmod,
-	.clk		= "mmchs2_ick",
-	.addr		= omap2430_mmc2_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* Slave interfaces on the L4_CORE interconnect */
-static struct omap_hwmod_ocp_if *omap2430_l4_core_slaves[] = {
-	&omap2430_l3_main__l4_core,
-};
-
-/* Master interfaces on the L4_CORE interconnect */
-static struct omap_hwmod_ocp_if *omap2430_l4_core_masters[] = {
-	&omap2430_l4_core__l4_wkup,
-	&omap2430_l4_core__mmc1,
-	&omap2430_l4_core__mmc2,
-};
-
-/* L4 CORE */
-static struct omap_hwmod omap2430_l4_core_hwmod = {
-	.name		= "l4_core",
-	.class		= &l4_hwmod_class,
-	.masters	= omap2430_l4_core_masters,
-	.masters_cnt	= ARRAY_SIZE(omap2430_l4_core_masters),
-	.slaves		= omap2430_l4_core_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_l4_core_slaves),
-	.flags		= HWMOD_NO_IDLEST,
-};
-
-/* Slave interfaces on the L4_WKUP interconnect */
-static struct omap_hwmod_ocp_if *omap2430_l4_wkup_slaves[] = {
-	&omap2430_l4_core__l4_wkup,
-	&omap2_l4_core__uart1,
-	&omap2_l4_core__uart2,
-	&omap2_l4_core__uart3,
-};
-
-/* Master interfaces on the L4_WKUP interconnect */
-static struct omap_hwmod_ocp_if *omap2430_l4_wkup_masters[] = {
-};
-
-/* l4 core -> mcspi1 interface */
-static struct omap_hwmod_ocp_if omap2430_l4_core__mcspi1 = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_mcspi1_hwmod,
-	.clk		= "mcspi1_ick",
-	.addr		= omap2_mcspi1_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4 core -> mcspi2 interface */
-static struct omap_hwmod_ocp_if omap2430_l4_core__mcspi2 = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_mcspi2_hwmod,
-	.clk		= "mcspi2_ick",
-	.addr		= omap2_mcspi2_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4 core -> mcspi3 interface */
-static struct omap_hwmod_ocp_if omap2430_l4_core__mcspi3 = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_mcspi3_hwmod,
-	.clk		= "mcspi3_ick",
-	.addr		= omap2430_mcspi3_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* L4 WKUP */
-static struct omap_hwmod omap2430_l4_wkup_hwmod = {
-	.name		= "l4_wkup",
-	.class		= &l4_hwmod_class,
-	.masters	= omap2430_l4_wkup_masters,
-	.masters_cnt	= ARRAY_SIZE(omap2430_l4_wkup_masters),
-	.slaves		= omap2430_l4_wkup_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_l4_wkup_slaves),
-	.flags		= HWMOD_NO_IDLEST,
-};
-
-/* Master interfaces on the MPU device */
-static struct omap_hwmod_ocp_if *omap2430_mpu_masters[] = {
-	&omap2430_mpu__l3_main,
-};
-
-/* MPU */
-static struct omap_hwmod omap2430_mpu_hwmod = {
-	.name		= "mpu",
-	.class		= &mpu_hwmod_class,
-	.main_clk	= "mpu_ck",
-	.masters	= omap2430_mpu_masters,
-	.masters_cnt	= ARRAY_SIZE(omap2430_mpu_masters),
-};
-
 /*
- * IVA2_1 interface data
+ * IP blocks
  */
 
-/* IVA2 <- L3 interface */
-static struct omap_hwmod_ocp_if omap2430_l3__iva = {
-	.master		= &omap2430_l3_main_hwmod,
-	.slave		= &omap2430_iva_hwmod,
-	.clk		= "dsp_fck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_ocp_if *omap2430_iva_masters[] = {
-	&omap2430_l3__iva,
+/* IVA2 (IVA2) */
+static struct omap_hwmod_rst_info omap2430_iva_resets[] = {
+	{ .name = "logic", .rst_shift = 0 },
+	{ .name = "mmu", .rst_shift = 1 },
 };
 
-/*
- * IVA2 (IVA2)
- */
-
 static struct omap_hwmod omap2430_iva_hwmod = {
 	.name		= "iva",
 	.class		= &iva_hwmod_class,
-	.masters	= omap2430_iva_masters,
-	.masters_cnt	= ARRAY_SIZE(omap2430_iva_masters),
-};
-
-/* always-on timers dev attribute */
-static struct omap_timer_capability_dev_attr capability_alwon_dev_attr = {
-	.timer_capability       = OMAP_TIMER_ALWON,
-};
-
-/* pwm timers dev attribute */
-static struct omap_timer_capability_dev_attr capability_pwm_dev_attr = {
-	.timer_capability       = OMAP_TIMER_HAS_PWM,
-};
-
-/* timer1 */
-static struct omap_hwmod omap2430_timer1_hwmod;
-
-static struct omap_hwmod_addr_space omap2430_timer1_addrs[] = {
-	{
-		.pa_start	= 0x49018000,
-		.pa_end		= 0x49018000 + SZ_1K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_wkup -> timer1 */
-static struct omap_hwmod_ocp_if omap2430_l4_wkup__timer1 = {
-	.master		= &omap2430_l4_wkup_hwmod,
-	.slave		= &omap2430_timer1_hwmod,
-	.clk		= "gpt1_ick",
-	.addr		= omap2430_timer1_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer1 slave port */
-static struct omap_hwmod_ocp_if *omap2430_timer1_slaves[] = {
-	&omap2430_l4_wkup__timer1,
-};
-
-/* timer1 hwmod */
-static struct omap_hwmod omap2430_timer1_hwmod = {
-	.name		= "timer1",
-	.mpu_irqs	= omap2_timer1_mpu_irqs,
-	.main_clk	= "gpt1_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_GPT1_SHIFT,
-			.module_offs = WKUP_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_GPT1_SHIFT,
-		},
-	},
-	.dev_attr	= &capability_alwon_dev_attr,
-	.slaves		= omap2430_timer1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_timer1_slaves),
-	.class		= &omap2xxx_timer_hwmod_class,
-};
-
-/* timer2 */
-static struct omap_hwmod omap2430_timer2_hwmod;
-
-/* l4_core -> timer2 */
-static struct omap_hwmod_ocp_if omap2430_l4_core__timer2 = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_timer2_hwmod,
-	.clk		= "gpt2_ick",
-	.addr		= omap2xxx_timer2_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer2 slave port */
-static struct omap_hwmod_ocp_if *omap2430_timer2_slaves[] = {
-	&omap2430_l4_core__timer2,
-};
-
-/* timer2 hwmod */
-static struct omap_hwmod omap2430_timer2_hwmod = {
-	.name		= "timer2",
-	.mpu_irqs	= omap2_timer2_mpu_irqs,
-	.main_clk	= "gpt2_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_GPT2_SHIFT,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_GPT2_SHIFT,
-		},
-	},
-	.dev_attr	= &capability_alwon_dev_attr,
-	.slaves		= omap2430_timer2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_timer2_slaves),
-	.class		= &omap2xxx_timer_hwmod_class,
-};
-
-/* timer3 */
-static struct omap_hwmod omap2430_timer3_hwmod;
-
-/* l4_core -> timer3 */
-static struct omap_hwmod_ocp_if omap2430_l4_core__timer3 = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_timer3_hwmod,
-	.clk		= "gpt3_ick",
-	.addr		= omap2xxx_timer3_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer3 slave port */
-static struct omap_hwmod_ocp_if *omap2430_timer3_slaves[] = {
-	&omap2430_l4_core__timer3,
-};
-
-/* timer3 hwmod */
-static struct omap_hwmod omap2430_timer3_hwmod = {
-	.name		= "timer3",
-	.mpu_irqs	= omap2_timer3_mpu_irqs,
-	.main_clk	= "gpt3_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_GPT3_SHIFT,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_GPT3_SHIFT,
-		},
-	},
-	.dev_attr	= &capability_alwon_dev_attr,
-	.slaves		= omap2430_timer3_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_timer3_slaves),
-	.class		= &omap2xxx_timer_hwmod_class,
-};
-
-/* timer4 */
-static struct omap_hwmod omap2430_timer4_hwmod;
-
-/* l4_core -> timer4 */
-static struct omap_hwmod_ocp_if omap2430_l4_core__timer4 = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_timer4_hwmod,
-	.clk		= "gpt4_ick",
-	.addr		= omap2xxx_timer4_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer4 slave port */
-static struct omap_hwmod_ocp_if *omap2430_timer4_slaves[] = {
-	&omap2430_l4_core__timer4,
-};
-
-/* timer4 hwmod */
-static struct omap_hwmod omap2430_timer4_hwmod = {
-	.name		= "timer4",
-	.mpu_irqs	= omap2_timer4_mpu_irqs,
-	.main_clk	= "gpt4_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_GPT4_SHIFT,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_GPT4_SHIFT,
-		},
-	},
-	.dev_attr	= &capability_alwon_dev_attr,
-	.slaves		= omap2430_timer4_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_timer4_slaves),
-	.class		= &omap2xxx_timer_hwmod_class,
-};
-
-/* timer5 */
-static struct omap_hwmod omap2430_timer5_hwmod;
-
-/* l4_core -> timer5 */
-static struct omap_hwmod_ocp_if omap2430_l4_core__timer5 = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_timer5_hwmod,
-	.clk		= "gpt5_ick",
-	.addr		= omap2xxx_timer5_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer5 slave port */
-static struct omap_hwmod_ocp_if *omap2430_timer5_slaves[] = {
-	&omap2430_l4_core__timer5,
-};
-
-/* timer5 hwmod */
-static struct omap_hwmod omap2430_timer5_hwmod = {
-	.name		= "timer5",
-	.mpu_irqs	= omap2_timer5_mpu_irqs,
-	.main_clk	= "gpt5_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_GPT5_SHIFT,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_GPT5_SHIFT,
-		},
-	},
-	.dev_attr	= &capability_alwon_dev_attr,
-	.slaves		= omap2430_timer5_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_timer5_slaves),
-	.class		= &omap2xxx_timer_hwmod_class,
-};
-
-/* timer6 */
-static struct omap_hwmod omap2430_timer6_hwmod;
-
-/* l4_core -> timer6 */
-static struct omap_hwmod_ocp_if omap2430_l4_core__timer6 = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_timer6_hwmod,
-	.clk		= "gpt6_ick",
-	.addr		= omap2xxx_timer6_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer6 slave port */
-static struct omap_hwmod_ocp_if *omap2430_timer6_slaves[] = {
-	&omap2430_l4_core__timer6,
-};
-
-/* timer6 hwmod */
-static struct omap_hwmod omap2430_timer6_hwmod = {
-	.name		= "timer6",
-	.mpu_irqs	= omap2_timer6_mpu_irqs,
-	.main_clk	= "gpt6_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_GPT6_SHIFT,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_GPT6_SHIFT,
-		},
-	},
-	.dev_attr	= &capability_alwon_dev_attr,
-	.slaves		= omap2430_timer6_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_timer6_slaves),
-	.class		= &omap2xxx_timer_hwmod_class,
-};
-
-/* timer7 */
-static struct omap_hwmod omap2430_timer7_hwmod;
-
-/* l4_core -> timer7 */
-static struct omap_hwmod_ocp_if omap2430_l4_core__timer7 = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_timer7_hwmod,
-	.clk		= "gpt7_ick",
-	.addr		= omap2xxx_timer7_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer7 slave port */
-static struct omap_hwmod_ocp_if *omap2430_timer7_slaves[] = {
-	&omap2430_l4_core__timer7,
-};
-
-/* timer7 hwmod */
-static struct omap_hwmod omap2430_timer7_hwmod = {
-	.name		= "timer7",
-	.mpu_irqs	= omap2_timer7_mpu_irqs,
-	.main_clk	= "gpt7_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_GPT7_SHIFT,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_GPT7_SHIFT,
-		},
-	},
-	.dev_attr	= &capability_alwon_dev_attr,
-	.slaves		= omap2430_timer7_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_timer7_slaves),
-	.class		= &omap2xxx_timer_hwmod_class,
-};
-
-/* timer8 */
-static struct omap_hwmod omap2430_timer8_hwmod;
-
-/* l4_core -> timer8 */
-static struct omap_hwmod_ocp_if omap2430_l4_core__timer8 = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_timer8_hwmod,
-	.clk		= "gpt8_ick",
-	.addr		= omap2xxx_timer8_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer8 slave port */
-static struct omap_hwmod_ocp_if *omap2430_timer8_slaves[] = {
-	&omap2430_l4_core__timer8,
-};
-
-/* timer8 hwmod */
-static struct omap_hwmod omap2430_timer8_hwmod = {
-	.name		= "timer8",
-	.mpu_irqs	= omap2_timer8_mpu_irqs,
-	.main_clk	= "gpt8_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_GPT8_SHIFT,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_GPT8_SHIFT,
-		},
-	},
-	.dev_attr	= &capability_alwon_dev_attr,
-	.slaves		= omap2430_timer8_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_timer8_slaves),
-	.class		= &omap2xxx_timer_hwmod_class,
-};
-
-/* timer9 */
-static struct omap_hwmod omap2430_timer9_hwmod;
-
-/* l4_core -> timer9 */
-static struct omap_hwmod_ocp_if omap2430_l4_core__timer9 = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_timer9_hwmod,
-	.clk		= "gpt9_ick",
-	.addr		= omap2xxx_timer9_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer9 slave port */
-static struct omap_hwmod_ocp_if *omap2430_timer9_slaves[] = {
-	&omap2430_l4_core__timer9,
-};
-
-/* timer9 hwmod */
-static struct omap_hwmod omap2430_timer9_hwmod = {
-	.name		= "timer9",
-	.mpu_irqs	= omap2_timer9_mpu_irqs,
-	.main_clk	= "gpt9_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_GPT9_SHIFT,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_GPT9_SHIFT,
-		},
-	},
-	.dev_attr	= &capability_pwm_dev_attr,
-	.slaves		= omap2430_timer9_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_timer9_slaves),
-	.class		= &omap2xxx_timer_hwmod_class,
-};
-
-/* timer10 */
-static struct omap_hwmod omap2430_timer10_hwmod;
-
-/* l4_core -> timer10 */
-static struct omap_hwmod_ocp_if omap2430_l4_core__timer10 = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_timer10_hwmod,
-	.clk		= "gpt10_ick",
-	.addr		= omap2_timer10_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer10 slave port */
-static struct omap_hwmod_ocp_if *omap2430_timer10_slaves[] = {
-	&omap2430_l4_core__timer10,
-};
-
-/* timer10 hwmod */
-static struct omap_hwmod omap2430_timer10_hwmod = {
-	.name		= "timer10",
-	.mpu_irqs	= omap2_timer10_mpu_irqs,
-	.main_clk	= "gpt10_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_GPT10_SHIFT,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_GPT10_SHIFT,
-		},
-	},
-	.dev_attr	= &capability_pwm_dev_attr,
-	.slaves		= omap2430_timer10_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_timer10_slaves),
-	.class		= &omap2xxx_timer_hwmod_class,
-};
-
-/* timer11 */
-static struct omap_hwmod omap2430_timer11_hwmod;
-
-/* l4_core -> timer11 */
-static struct omap_hwmod_ocp_if omap2430_l4_core__timer11 = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_timer11_hwmod,
-	.clk		= "gpt11_ick",
-	.addr		= omap2_timer11_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer11 slave port */
-static struct omap_hwmod_ocp_if *omap2430_timer11_slaves[] = {
-	&omap2430_l4_core__timer11,
-};
-
-/* timer11 hwmod */
-static struct omap_hwmod omap2430_timer11_hwmod = {
-	.name		= "timer11",
-	.mpu_irqs	= omap2_timer11_mpu_irqs,
-	.main_clk	= "gpt11_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_GPT11_SHIFT,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_GPT11_SHIFT,
-		},
-	},
-	.dev_attr	= &capability_pwm_dev_attr,
-	.slaves		= omap2430_timer11_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_timer11_slaves),
-	.class		= &omap2xxx_timer_hwmod_class,
-};
-
-/* timer12 */
-static struct omap_hwmod omap2430_timer12_hwmod;
-
-/* l4_core -> timer12 */
-static struct omap_hwmod_ocp_if omap2430_l4_core__timer12 = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_timer12_hwmod,
-	.clk		= "gpt12_ick",
-	.addr		= omap2xxx_timer12_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer12 slave port */
-static struct omap_hwmod_ocp_if *omap2430_timer12_slaves[] = {
-	&omap2430_l4_core__timer12,
-};
-
-/* timer12 hwmod */
-static struct omap_hwmod omap2430_timer12_hwmod = {
-	.name		= "timer12",
-	.mpu_irqs	= omap2xxx_timer12_mpu_irqs,
-	.main_clk	= "gpt12_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_GPT12_SHIFT,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_GPT12_SHIFT,
-		},
-	},
-	.dev_attr	= &capability_pwm_dev_attr,
-	.slaves		= omap2430_timer12_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_timer12_slaves),
-	.class		= &omap2xxx_timer_hwmod_class,
-};
-
-/* l4_wkup -> wd_timer2 */
-static struct omap_hwmod_addr_space omap2430_wd_timer2_addrs[] = {
-	{
-		.pa_start	= 0x49016000,
-		.pa_end		= 0x4901607f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if omap2430_l4_wkup__wd_timer2 = {
-	.master		= &omap2430_l4_wkup_hwmod,
-	.slave		= &omap2430_wd_timer2_hwmod,
-	.clk		= "mpu_wdt_ick",
-	.addr		= omap2430_wd_timer2_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* wd_timer2 */
-static struct omap_hwmod_ocp_if *omap2430_wd_timer2_slaves[] = {
-	&omap2430_l4_wkup__wd_timer2,
-};
-
-static struct omap_hwmod omap2430_wd_timer2_hwmod = {
-	.name		= "wd_timer2",
-	.class		= &omap2xxx_wd_timer_hwmod_class,
-	.main_clk	= "mpu_wdt_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_MPU_WDT_SHIFT,
-			.module_offs = WKUP_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_MPU_WDT_SHIFT,
-		},
-	},
-	.slaves		= omap2430_wd_timer2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_wd_timer2_slaves),
-};
-
-/* UART1 */
-
-static struct omap_hwmod_ocp_if *omap2430_uart1_slaves[] = {
-	&omap2_l4_core__uart1,
-};
-
-static struct omap_hwmod omap2430_uart1_hwmod = {
-	.name		= "uart1",
-	.mpu_irqs	= omap2_uart1_mpu_irqs,
-	.sdma_reqs	= omap2_uart1_sdma_reqs,
-	.main_clk	= "uart1_fck",
-	.prcm		= {
-		.omap2 = {
-			.module_offs = CORE_MOD,
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_UART1_SHIFT,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_EN_UART1_SHIFT,
-		},
-	},
-	.slaves		= omap2430_uart1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_uart1_slaves),
-	.class		= &omap2_uart_class,
-};
-
-/* UART2 */
-
-static struct omap_hwmod_ocp_if *omap2430_uart2_slaves[] = {
-	&omap2_l4_core__uart2,
-};
-
-static struct omap_hwmod omap2430_uart2_hwmod = {
-	.name		= "uart2",
-	.mpu_irqs	= omap2_uart2_mpu_irqs,
-	.sdma_reqs	= omap2_uart2_sdma_reqs,
-	.main_clk	= "uart2_fck",
-	.prcm		= {
-		.omap2 = {
-			.module_offs = CORE_MOD,
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_UART2_SHIFT,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_EN_UART2_SHIFT,
-		},
-	},
-	.slaves		= omap2430_uart2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_uart2_slaves),
-	.class		= &omap2_uart_class,
-};
-
-/* UART3 */
-
-static struct omap_hwmod_ocp_if *omap2430_uart3_slaves[] = {
-	&omap2_l4_core__uart3,
-};
-
-static struct omap_hwmod omap2430_uart3_hwmod = {
-	.name		= "uart3",
-	.mpu_irqs	= omap2_uart3_mpu_irqs,
-	.sdma_reqs	= omap2_uart3_sdma_reqs,
-	.main_clk	= "uart3_fck",
-	.prcm		= {
-		.omap2 = {
-			.module_offs = CORE_MOD,
-			.prcm_reg_id = 2,
-			.module_bit = OMAP24XX_EN_UART3_SHIFT,
-			.idlest_reg_id = 2,
-			.idlest_idle_bit = OMAP24XX_EN_UART3_SHIFT,
-		},
-	},
-	.slaves		= omap2430_uart3_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_uart3_slaves),
-	.class		= &omap2_uart_class,
-};
-
-/* dss */
-/* dss master ports */
-static struct omap_hwmod_ocp_if *omap2430_dss_masters[] = {
-	&omap2430_dss__l3,
-};
-
-/* l4_core -> dss */
-static struct omap_hwmod_ocp_if omap2430_l4_core__dss = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_dss_core_hwmod,
-	.clk		= "dss_ick",
-	.addr		= omap2_dss_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* dss slave ports */
-static struct omap_hwmod_ocp_if *omap2430_dss_slaves[] = {
-	&omap2430_l4_core__dss,
-};
-
-static struct omap_hwmod_opt_clk dss_opt_clks[] = {
-	/*
-	 * The DSS HW needs all DSS clocks enabled during reset. The dss_core
-	 * driver does not use these clocks.
-	 */
-	{ .role = "tv_clk", .clk = "dss_54m_fck" },
-	{ .role = "sys_clk", .clk = "dss2_fck" },
-};
-
-static struct omap_hwmod omap2430_dss_core_hwmod = {
-	.name		= "dss_core",
-	.class		= &omap2_dss_hwmod_class,
-	.main_clk	= "dss1_fck", /* instead of dss_fck */
-	.sdma_reqs	= omap2xxx_dss_sdma_chs,
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_DSS1_SHIFT,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_stdby_bit = OMAP24XX_ST_DSS_SHIFT,
-		},
-	},
-	.opt_clks	= dss_opt_clks,
-	.opt_clks_cnt = ARRAY_SIZE(dss_opt_clks),
-	.slaves		= omap2430_dss_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_dss_slaves),
-	.masters	= omap2430_dss_masters,
-	.masters_cnt	= ARRAY_SIZE(omap2430_dss_masters),
-	.flags		= HWMOD_NO_IDLEST | HWMOD_CONTROL_OPT_CLKS_IN_RESET,
-};
-
-/* l4_core -> dss_dispc */
-static struct omap_hwmod_ocp_if omap2430_l4_core__dss_dispc = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_dss_dispc_hwmod,
-	.clk		= "dss_ick",
-	.addr		= omap2_dss_dispc_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* dss_dispc slave ports */
-static struct omap_hwmod_ocp_if *omap2430_dss_dispc_slaves[] = {
-	&omap2430_l4_core__dss_dispc,
-};
-
-static struct omap_hwmod omap2430_dss_dispc_hwmod = {
-	.name		= "dss_dispc",
-	.class		= &omap2_dispc_hwmod_class,
-	.mpu_irqs	= omap2_dispc_irqs,
-	.main_clk	= "dss1_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_DSS1_SHIFT,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_stdby_bit = OMAP24XX_ST_DSS_SHIFT,
-		},
-	},
-	.slaves		= omap2430_dss_dispc_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_dss_dispc_slaves),
-	.flags		= HWMOD_NO_IDLEST,
-	.dev_attr	= &omap2_3_dss_dispc_dev_attr
-};
-
-/* l4_core -> dss_rfbi */
-static struct omap_hwmod_ocp_if omap2430_l4_core__dss_rfbi = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_dss_rfbi_hwmod,
-	.clk		= "dss_ick",
-	.addr		= omap2_dss_rfbi_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* dss_rfbi slave ports */
-static struct omap_hwmod_ocp_if *omap2430_dss_rfbi_slaves[] = {
-	&omap2430_l4_core__dss_rfbi,
-};
-
-static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = {
-	{ .role = "ick", .clk = "dss_ick" },
-};
-
-static struct omap_hwmod omap2430_dss_rfbi_hwmod = {
-	.name		= "dss_rfbi",
-	.class		= &omap2_rfbi_hwmod_class,
-	.main_clk	= "dss1_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_DSS1_SHIFT,
-			.module_offs = CORE_MOD,
-		},
-	},
-	.opt_clks	= dss_rfbi_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(dss_rfbi_opt_clks),
-	.slaves		= omap2430_dss_rfbi_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_dss_rfbi_slaves),
-	.flags		= HWMOD_NO_IDLEST,
-};
-
-/* l4_core -> dss_venc */
-static struct omap_hwmod_ocp_if omap2430_l4_core__dss_venc = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_dss_venc_hwmod,
-	.clk		= "dss_ick",
-	.addr		= omap2_dss_venc_addrs,
-	.flags		= OCPIF_SWSUP_IDLE,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* dss_venc slave ports */
-static struct omap_hwmod_ocp_if *omap2430_dss_venc_slaves[] = {
-	&omap2430_l4_core__dss_venc,
-};
-
-static struct omap_hwmod omap2430_dss_venc_hwmod = {
-	.name		= "dss_venc",
-	.class		= &omap2_venc_hwmod_class,
-	.main_clk	= "dss_54m_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_DSS1_SHIFT,
-			.module_offs = CORE_MOD,
-		},
-	},
-	.slaves		= omap2430_dss_venc_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_dss_venc_slaves),
-	.flags		= HWMOD_NO_IDLEST,
+	.clkdm_name	= "dsp_clkdm",
+	.rst_lines	= omap2430_iva_resets,
+	.rst_lines_cnt	= ARRAY_SIZE(omap2430_iva_resets),
+	.main_clk	= "dsp_fck",
 };
 
 /* I2C common */
@@ -1099,11 +84,6 @@ static struct omap_i2c_dev_attr i2c_dev_attr = {
 };
 
 /* I2C1 */
-
-static struct omap_hwmod_ocp_if *omap2430_i2c1_slaves[] = {
-	&omap2430_l4_core__i2c1,
-};
-
 static struct omap_hwmod omap2430_i2c1_hwmod = {
 	.name		= "i2c1",
 	.flags		= HWMOD_16BIT_REG,
@@ -1127,18 +107,11 @@ static struct omap_hwmod omap2430_i2c1_hwmod = {
 			.idlest_idle_bit = OMAP2430_ST_I2CHS1_SHIFT,
 		},
 	},
-	.slaves		= omap2430_i2c1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_i2c1_slaves),
 	.class		= &i2c_class,
 	.dev_attr	= &i2c_dev_attr,
 };
 
 /* I2C2 */
-
-static struct omap_hwmod_ocp_if *omap2430_i2c2_slaves[] = {
-	&omap2430_l4_core__i2c2,
-};
-
 static struct omap_hwmod omap2430_i2c2_hwmod = {
 	.name		= "i2c2",
 	.flags		= HWMOD_16BIT_REG,
@@ -1154,218 +127,16 @@ static struct omap_hwmod omap2430_i2c2_hwmod = {
 			.idlest_idle_bit = OMAP2430_ST_I2CHS2_SHIFT,
 		},
 	},
-	.slaves		= omap2430_i2c2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_i2c2_slaves),
 	.class		= &i2c_class,
 	.dev_attr	= &i2c_dev_attr,
 };
 
-/* l4_wkup -> gpio1 */
-static struct omap_hwmod_addr_space omap2430_gpio1_addr_space[] = {
-	{
-		.pa_start	= 0x4900C000,
-		.pa_end		= 0x4900C1ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio1 = {
-	.master		= &omap2430_l4_wkup_hwmod,
-	.slave		= &omap2430_gpio1_hwmod,
-	.clk		= "gpios_ick",
-	.addr		= omap2430_gpio1_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_wkup -> gpio2 */
-static struct omap_hwmod_addr_space omap2430_gpio2_addr_space[] = {
-	{
-		.pa_start	= 0x4900E000,
-		.pa_end		= 0x4900E1ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio2 = {
-	.master		= &omap2430_l4_wkup_hwmod,
-	.slave		= &omap2430_gpio2_hwmod,
-	.clk		= "gpios_ick",
-	.addr		= omap2430_gpio2_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_wkup -> gpio3 */
-static struct omap_hwmod_addr_space omap2430_gpio3_addr_space[] = {
-	{
-		.pa_start	= 0x49010000,
-		.pa_end		= 0x490101ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio3 = {
-	.master		= &omap2430_l4_wkup_hwmod,
-	.slave		= &omap2430_gpio3_hwmod,
-	.clk		= "gpios_ick",
-	.addr		= omap2430_gpio3_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_wkup -> gpio4 */
-static struct omap_hwmod_addr_space omap2430_gpio4_addr_space[] = {
-	{
-		.pa_start	= 0x49012000,
-		.pa_end		= 0x490121ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio4 = {
-	.master		= &omap2430_l4_wkup_hwmod,
-	.slave		= &omap2430_gpio4_hwmod,
-	.clk		= "gpios_ick",
-	.addr		= omap2430_gpio4_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_core -> gpio5 */
-static struct omap_hwmod_addr_space omap2430_gpio5_addr_space[] = {
-	{
-		.pa_start	= 0x480B6000,
-		.pa_end		= 0x480B61ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if omap2430_l4_core__gpio5 = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_gpio5_hwmod,
-	.clk		= "gpio5_ick",
-	.addr		= omap2430_gpio5_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* gpio dev_attr */
-static struct omap_gpio_dev_attr gpio_dev_attr = {
-	.bank_width = 32,
-	.dbck_flag = false,
-};
-
-/* gpio1 */
-static struct omap_hwmod_ocp_if *omap2430_gpio1_slaves[] = {
-	&omap2430_l4_wkup__gpio1,
-};
-
-static struct omap_hwmod omap2430_gpio1_hwmod = {
-	.name		= "gpio1",
-	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
-	.mpu_irqs	= omap2_gpio1_irqs,
-	.main_clk	= "gpios_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_GPIOS_SHIFT,
-			.module_offs = WKUP_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_EN_GPIOS_SHIFT,
-		},
-	},
-	.slaves		= omap2430_gpio1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_gpio1_slaves),
-	.class		= &omap2xxx_gpio_hwmod_class,
-	.dev_attr	= &gpio_dev_attr,
-};
-
-/* gpio2 */
-static struct omap_hwmod_ocp_if *omap2430_gpio2_slaves[] = {
-	&omap2430_l4_wkup__gpio2,
-};
-
-static struct omap_hwmod omap2430_gpio2_hwmod = {
-	.name		= "gpio2",
-	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
-	.mpu_irqs	= omap2_gpio2_irqs,
-	.main_clk	= "gpios_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_GPIOS_SHIFT,
-			.module_offs = WKUP_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT,
-		},
-	},
-	.slaves		= omap2430_gpio2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_gpio2_slaves),
-	.class		= &omap2xxx_gpio_hwmod_class,
-	.dev_attr	= &gpio_dev_attr,
-};
-
-/* gpio3 */
-static struct omap_hwmod_ocp_if *omap2430_gpio3_slaves[] = {
-	&omap2430_l4_wkup__gpio3,
-};
-
-static struct omap_hwmod omap2430_gpio3_hwmod = {
-	.name		= "gpio3",
-	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
-	.mpu_irqs	= omap2_gpio3_irqs,
-	.main_clk	= "gpios_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_GPIOS_SHIFT,
-			.module_offs = WKUP_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT,
-		},
-	},
-	.slaves		= omap2430_gpio3_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_gpio3_slaves),
-	.class		= &omap2xxx_gpio_hwmod_class,
-	.dev_attr	= &gpio_dev_attr,
-};
-
-/* gpio4 */
-static struct omap_hwmod_ocp_if *omap2430_gpio4_slaves[] = {
-	&omap2430_l4_wkup__gpio4,
-};
-
-static struct omap_hwmod omap2430_gpio4_hwmod = {
-	.name		= "gpio4",
-	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
-	.mpu_irqs	= omap2_gpio4_irqs,
-	.main_clk	= "gpios_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_GPIOS_SHIFT,
-			.module_offs = WKUP_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT,
-		},
-	},
-	.slaves		= omap2430_gpio4_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_gpio4_slaves),
-	.class		= &omap2xxx_gpio_hwmod_class,
-	.dev_attr	= &gpio_dev_attr,
-};
-
 /* gpio5 */
 static struct omap_hwmod_irq_info omap243x_gpio5_irqs[] = {
 	{ .irq = 33 }, /* INT_24XX_GPIO_BANK5 */
 	{ .irq = -1 }
 };
 
-static struct omap_hwmod_ocp_if *omap2430_gpio5_slaves[] = {
-	&omap2430_l4_core__gpio5,
-};
-
 static struct omap_hwmod omap2430_gpio5_hwmod = {
 	.name		= "gpio5",
 	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
@@ -1380,10 +151,8 @@ static struct omap_hwmod omap2430_gpio5_hwmod = {
 			.idlest_idle_bit = OMAP2430_ST_GPIO5_SHIFT,
 		},
 	},
-	.slaves		= omap2430_gpio5_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_gpio5_slaves),
 	.class		= &omap2xxx_gpio_hwmod_class,
-	.dev_attr	= &gpio_dev_attr,
+	.dev_attr	= &omap2xxx_gpio_dev_attr,
 };
 
 /* dma attributes */
@@ -1393,66 +162,21 @@ static struct omap_dma_dev_attr dma_dev_attr = {
 	.lch_count = 32,
 };
 
-/* dma_system -> L3 */
-static struct omap_hwmod_ocp_if omap2430_dma_system__l3 = {
-	.master		= &omap2430_dma_system_hwmod,
-	.slave		= &omap2430_l3_main_hwmod,
-	.clk		= "core_l3_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* dma_system master ports */
-static struct omap_hwmod_ocp_if *omap2430_dma_system_masters[] = {
-	&omap2430_dma_system__l3,
-};
-
-/* l4_core -> dma_system */
-static struct omap_hwmod_ocp_if omap2430_l4_core__dma_system = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_dma_system_hwmod,
-	.clk		= "sdma_ick",
-	.addr		= omap2_dma_system_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* dma_system slave ports */
-static struct omap_hwmod_ocp_if *omap2430_dma_system_slaves[] = {
-	&omap2430_l4_core__dma_system,
-};
-
 static struct omap_hwmod omap2430_dma_system_hwmod = {
 	.name		= "dma",
 	.class		= &omap2xxx_dma_hwmod_class,
 	.mpu_irqs	= omap2_dma_system_irqs,
 	.main_clk	= "core_l3_ck",
-	.slaves		= omap2430_dma_system_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_dma_system_slaves),
-	.masters	= omap2430_dma_system_masters,
-	.masters_cnt	= ARRAY_SIZE(omap2430_dma_system_masters),
 	.dev_attr	= &dma_dev_attr,
 	.flags		= HWMOD_NO_IDLEST,
 };
 
 /* mailbox */
-static struct omap_hwmod omap2430_mailbox_hwmod;
 static struct omap_hwmod_irq_info omap2430_mailbox_irqs[] = {
 	{ .irq = 26 },
 	{ .irq = -1 }
 };
 
-/* l4_core -> mailbox */
-static struct omap_hwmod_ocp_if omap2430_l4_core__mailbox = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_mailbox_hwmod,
-	.addr		= omap2_mailbox_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mailbox slave ports */
-static struct omap_hwmod_ocp_if *omap2430_mailbox_slaves[] = {
-	&omap2430_l4_core__mailbox,
-};
-
 static struct omap_hwmod omap2430_mailbox_hwmod = {
 	.name		= "mailbox",
 	.class		= &omap2xxx_mailbox_hwmod_class,
@@ -1467,66 +191,6 @@ static struct omap_hwmod omap2430_mailbox_hwmod = {
 			.idlest_idle_bit = OMAP24XX_ST_MAILBOXES_SHIFT,
 		},
 	},
-	.slaves		= omap2430_mailbox_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_mailbox_slaves),
-};
-
-/* mcspi1 */
-static struct omap_hwmod_ocp_if *omap2430_mcspi1_slaves[] = {
-	&omap2430_l4_core__mcspi1,
-};
-
-static struct omap2_mcspi_dev_attr omap_mcspi1_dev_attr = {
-	.num_chipselect = 4,
-};
-
-static struct omap_hwmod omap2430_mcspi1_hwmod = {
-	.name		= "mcspi1_hwmod",
-	.mpu_irqs	= omap2_mcspi1_mpu_irqs,
-	.sdma_reqs	= omap2_mcspi1_sdma_reqs,
-	.main_clk	= "mcspi1_fck",
-	.prcm		= {
-		.omap2 = {
-			.module_offs = CORE_MOD,
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_MCSPI1_SHIFT,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_MCSPI1_SHIFT,
-		},
-	},
-	.slaves		= omap2430_mcspi1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_mcspi1_slaves),
-	.class		= &omap2xxx_mcspi_class,
-	.dev_attr	= &omap_mcspi1_dev_attr,
-};
-
-/* mcspi2 */
-static struct omap_hwmod_ocp_if *omap2430_mcspi2_slaves[] = {
-	&omap2430_l4_core__mcspi2,
-};
-
-static struct omap2_mcspi_dev_attr omap_mcspi2_dev_attr = {
-	.num_chipselect = 2,
-};
-
-static struct omap_hwmod omap2430_mcspi2_hwmod = {
-	.name		= "mcspi2_hwmod",
-	.mpu_irqs	= omap2_mcspi2_mpu_irqs,
-	.sdma_reqs	= omap2_mcspi2_sdma_reqs,
-	.main_clk	= "mcspi2_fck",
-	.prcm		= {
-		.omap2 = {
-			.module_offs = CORE_MOD,
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_MCSPI2_SHIFT,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_MCSPI2_SHIFT,
-		},
-	},
-	.slaves		= omap2430_mcspi2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_mcspi2_slaves),
-	.class		= &omap2xxx_mcspi_class,
-	.dev_attr	= &omap_mcspi2_dev_attr,
 };
 
 /* mcspi3 */
@@ -1543,16 +207,12 @@ static struct omap_hwmod_dma_info omap2430_mcspi3_sdma_reqs[] = {
 	{ .dma_req = -1 }
 };
 
-static struct omap_hwmod_ocp_if *omap2430_mcspi3_slaves[] = {
-	&omap2430_l4_core__mcspi3,
-};
-
 static struct omap2_mcspi_dev_attr omap_mcspi3_dev_attr = {
 	.num_chipselect = 2,
 };
 
 static struct omap_hwmod omap2430_mcspi3_hwmod = {
-	.name		= "mcspi3_hwmod",
+	.name		= "mcspi3",
 	.mpu_irqs	= omap2430_mcspi3_mpu_irqs,
 	.sdma_reqs	= omap2430_mcspi3_sdma_reqs,
 	.main_clk	= "mcspi3_fck",
@@ -1565,15 +225,11 @@ static struct omap_hwmod omap2430_mcspi3_hwmod = {
 			.idlest_idle_bit = OMAP2430_ST_MCSPI3_SHIFT,
 		},
 	},
-	.slaves		= omap2430_mcspi3_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_mcspi3_slaves),
 	.class		= &omap2xxx_mcspi_class,
 	.dev_attr	= &omap_mcspi3_dev_attr,
 };
 
-/*
- * usbhsotg
- */
+/* usbhsotg */
 static struct omap_hwmod_class_sysconfig omap2430_usbhsotg_sysc = {
 	.rev_offs	= 0x0400,
 	.sysc_offs	= 0x0404,
@@ -1612,10 +268,6 @@ static struct omap_hwmod omap2430_usbhsotg_hwmod = {
 			.idlest_idle_bit = OMAP2430_ST_USBHS_SHIFT,
 		},
 	},
-	.masters	= omap2430_usbhsotg_masters,
-	.masters_cnt	= ARRAY_SIZE(omap2430_usbhsotg_masters),
-	.slaves		= omap2430_usbhsotg_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_usbhsotg_slaves),
 	.class		= &usbotg_class,
 	/*
 	 * Erratum ID: i479  idle_req / idle_ack mechanism potentially
@@ -1653,20 +305,6 @@ static struct omap_hwmod_irq_info omap2430_mcbsp1_irqs[] = {
 	{ .irq = -1 }
 };
 
-/* l4_core -> mcbsp1 */
-static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp1 = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_mcbsp1_hwmod,
-	.clk		= "mcbsp1_ick",
-	.addr		= omap2_mcbsp1_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mcbsp1 slave ports */
-static struct omap_hwmod_ocp_if *omap2430_mcbsp1_slaves[] = {
-	&omap2430_l4_core__mcbsp1,
-};
-
 static struct omap_hwmod omap2430_mcbsp1_hwmod = {
 	.name		= "mcbsp1",
 	.class		= &omap2430_mcbsp_hwmod_class,
@@ -1682,8 +320,6 @@ static struct omap_hwmod omap2430_mcbsp1_hwmod = {
 			.idlest_idle_bit = OMAP24XX_ST_MCBSP1_SHIFT,
 		},
 	},
-	.slaves		= omap2430_mcbsp1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_mcbsp1_slaves),
 };
 
 /* mcbsp2 */
@@ -1694,20 +330,6 @@ static struct omap_hwmod_irq_info omap2430_mcbsp2_irqs[] = {
 	{ .irq = -1 }
 };
 
-/* l4_core -> mcbsp2 */
-static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp2 = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_mcbsp2_hwmod,
-	.clk		= "mcbsp2_ick",
-	.addr		= omap2xxx_mcbsp2_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mcbsp2 slave ports */
-static struct omap_hwmod_ocp_if *omap2430_mcbsp2_slaves[] = {
-	&omap2430_l4_core__mcbsp2,
-};
-
 static struct omap_hwmod omap2430_mcbsp2_hwmod = {
 	.name		= "mcbsp2",
 	.class		= &omap2430_mcbsp_hwmod_class,
@@ -1723,8 +345,6 @@ static struct omap_hwmod omap2430_mcbsp2_hwmod = {
 			.idlest_idle_bit = OMAP24XX_ST_MCBSP2_SHIFT,
 		},
 	},
-	.slaves		= omap2430_mcbsp2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_mcbsp2_slaves),
 };
 
 /* mcbsp3 */
@@ -1735,30 +355,6 @@ static struct omap_hwmod_irq_info omap2430_mcbsp3_irqs[] = {
 	{ .irq = -1 }
 };
 
-static struct omap_hwmod_addr_space omap2430_mcbsp3_addrs[] = {
-	{
-		.name		= "mpu",
-		.pa_start	= 0x4808C000,
-		.pa_end		= 0x4808C0ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_core -> mcbsp3 */
-static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp3 = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_mcbsp3_hwmod,
-	.clk		= "mcbsp3_ick",
-	.addr		= omap2430_mcbsp3_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mcbsp3 slave ports */
-static struct omap_hwmod_ocp_if *omap2430_mcbsp3_slaves[] = {
-	&omap2430_l4_core__mcbsp3,
-};
-
 static struct omap_hwmod omap2430_mcbsp3_hwmod = {
 	.name		= "mcbsp3",
 	.class		= &omap2430_mcbsp_hwmod_class,
@@ -1774,8 +370,6 @@ static struct omap_hwmod omap2430_mcbsp3_hwmod = {
 			.idlest_idle_bit = OMAP2430_ST_MCBSP3_SHIFT,
 		},
 	},
-	.slaves		= omap2430_mcbsp3_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_mcbsp3_slaves),
 };
 
 /* mcbsp4 */
@@ -1792,30 +386,6 @@ static struct omap_hwmod_dma_info omap2430_mcbsp4_sdma_chs[] = {
 	{ .dma_req = -1 }
 };
 
-static struct omap_hwmod_addr_space omap2430_mcbsp4_addrs[] = {
-	{
-		.name		= "mpu",
-		.pa_start	= 0x4808E000,
-		.pa_end		= 0x4808E0ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_core -> mcbsp4 */
-static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp4 = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_mcbsp4_hwmod,
-	.clk		= "mcbsp4_ick",
-	.addr		= omap2430_mcbsp4_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mcbsp4 slave ports */
-static struct omap_hwmod_ocp_if *omap2430_mcbsp4_slaves[] = {
-	&omap2430_l4_core__mcbsp4,
-};
-
 static struct omap_hwmod omap2430_mcbsp4_hwmod = {
 	.name		= "mcbsp4",
 	.class		= &omap2430_mcbsp_hwmod_class,
@@ -1831,8 +401,6 @@ static struct omap_hwmod omap2430_mcbsp4_hwmod = {
 			.idlest_idle_bit = OMAP2430_ST_MCBSP4_SHIFT,
 		},
 	},
-	.slaves		= omap2430_mcbsp4_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_mcbsp4_slaves),
 };
 
 /* mcbsp5 */
@@ -1849,30 +417,6 @@ static struct omap_hwmod_dma_info omap2430_mcbsp5_sdma_chs[] = {
 	{ .dma_req = -1 }
 };
 
-static struct omap_hwmod_addr_space omap2430_mcbsp5_addrs[] = {
-	{
-		.name		= "mpu",
-		.pa_start	= 0x48096000,
-		.pa_end		= 0x480960ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_core -> mcbsp5 */
-static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp5 = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_mcbsp5_hwmod,
-	.clk		= "mcbsp5_ick",
-	.addr		= omap2430_mcbsp5_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mcbsp5 slave ports */
-static struct omap_hwmod_ocp_if *omap2430_mcbsp5_slaves[] = {
-	&omap2430_l4_core__mcbsp5,
-};
-
 static struct omap_hwmod omap2430_mcbsp5_hwmod = {
 	.name		= "mcbsp5",
 	.class		= &omap2430_mcbsp_hwmod_class,
@@ -1888,12 +432,9 @@ static struct omap_hwmod omap2430_mcbsp5_hwmod = {
 			.idlest_idle_bit = OMAP2430_ST_MCBSP5_SHIFT,
 		},
 	},
-	.slaves		= omap2430_mcbsp5_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_mcbsp5_slaves),
 };
 
 /* MMC/SD/SDIO common */
-
 static struct omap_hwmod_class_sysconfig omap2430_mmc_sysc = {
 	.rev_offs	= 0x1fc,
 	.sysc_offs	= 0x10,
@@ -1911,7 +452,6 @@ static struct omap_hwmod_class omap2430_mmc_class = {
 };
 
 /* MMC/SD/SDIO1 */
-
 static struct omap_hwmod_irq_info omap2430_mmc1_mpu_irqs[] = {
 	{ .irq = 83 },
 	{ .irq = -1 }
@@ -1927,10 +467,6 @@ static struct omap_hwmod_opt_clk omap2430_mmc1_opt_clks[] = {
 	{ .role = "dbck", .clk = "mmchsdb1_fck" },
 };
 
-static struct omap_hwmod_ocp_if *omap2430_mmc1_slaves[] = {
-	&omap2430_l4_core__mmc1,
-};
-
 static struct omap_mmc_dev_attr mmc1_dev_attr = {
 	.flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
 };
@@ -1953,13 +489,10 @@ static struct omap_hwmod omap2430_mmc1_hwmod = {
 		},
 	},
 	.dev_attr	= &mmc1_dev_attr,
-	.slaves		= omap2430_mmc1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_mmc1_slaves),
 	.class		= &omap2430_mmc_class,
 };
 
 /* MMC/SD/SDIO2 */
-
 static struct omap_hwmod_irq_info omap2430_mmc2_mpu_irqs[] = {
 	{ .irq = 86 },
 	{ .irq = -1 }
@@ -1975,10 +508,6 @@ static struct omap_hwmod_opt_clk omap2430_mmc2_opt_clks[] = {
 	{ .role = "dbck", .clk = "mmchsdb2_fck" },
 };
 
-static struct omap_hwmod_ocp_if *omap2430_mmc2_slaves[] = {
-	&omap2430_l4_core__mmc2,
-};
-
 static struct omap_hwmod omap2430_mmc2_hwmod = {
 	.name		= "mmc2",
 	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
@@ -1996,78 +525,418 @@ static struct omap_hwmod omap2430_mmc2_hwmod = {
 			.idlest_idle_bit = OMAP2430_ST_MMCHS2_SHIFT,
 		},
 	},
-	.slaves		= omap2430_mmc2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_mmc2_slaves),
 	.class		= &omap2430_mmc_class,
 };
 
-static __initdata struct omap_hwmod *omap2430_hwmods[] = {
-	&omap2430_l3_main_hwmod,
-	&omap2430_l4_core_hwmod,
-	&omap2430_l4_wkup_hwmod,
-	&omap2430_mpu_hwmod,
-	&omap2430_iva_hwmod,
-
-	&omap2430_timer1_hwmod,
-	&omap2430_timer2_hwmod,
-	&omap2430_timer3_hwmod,
-	&omap2430_timer4_hwmod,
-	&omap2430_timer5_hwmod,
-	&omap2430_timer6_hwmod,
-	&omap2430_timer7_hwmod,
-	&omap2430_timer8_hwmod,
-	&omap2430_timer9_hwmod,
-	&omap2430_timer10_hwmod,
-	&omap2430_timer11_hwmod,
-	&omap2430_timer12_hwmod,
-
-	&omap2430_wd_timer2_hwmod,
-	&omap2430_uart1_hwmod,
-	&omap2430_uart2_hwmod,
-	&omap2430_uart3_hwmod,
-	/* dss class */
-	&omap2430_dss_core_hwmod,
-	&omap2430_dss_dispc_hwmod,
-	&omap2430_dss_rfbi_hwmod,
-	&omap2430_dss_venc_hwmod,
-	/* i2c class */
-	&omap2430_i2c1_hwmod,
-	&omap2430_i2c2_hwmod,
-	&omap2430_mmc1_hwmod,
-	&omap2430_mmc2_hwmod,
-
-	/* gpio class */
-	&omap2430_gpio1_hwmod,
-	&omap2430_gpio2_hwmod,
-	&omap2430_gpio3_hwmod,
-	&omap2430_gpio4_hwmod,
-	&omap2430_gpio5_hwmod,
-
-	/* dma_system class*/
-	&omap2430_dma_system_hwmod,
-
-	/* mcbsp class */
-	&omap2430_mcbsp1_hwmod,
-	&omap2430_mcbsp2_hwmod,
-	&omap2430_mcbsp3_hwmod,
-	&omap2430_mcbsp4_hwmod,
-	&omap2430_mcbsp5_hwmod,
-
-	/* mailbox class */
-	&omap2430_mailbox_hwmod,
-
-	/* mcspi class */
-	&omap2430_mcspi1_hwmod,
-	&omap2430_mcspi2_hwmod,
-	&omap2430_mcspi3_hwmod,
-
-	/* usbotg class*/
-	&omap2430_usbhsotg_hwmod,
+/* HDQ1W/1-wire */
+static struct omap_hwmod omap2430_hdq1w_hwmod = {
+	.name		= "hdq1w",
+	.mpu_irqs	= omap2_hdq1w_mpu_irqs,
+	.main_clk	= "hdq_fck",
+	.prcm		= {
+		.omap2 = {
+			.module_offs = CORE_MOD,
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_HDQ_SHIFT,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_ST_HDQ_SHIFT,
+		},
+	},
+	.class		= &omap2_hdq1w_class,
+};
+
+/*
+ * interfaces
+ */
+
+/* L3 -> L4_CORE interface */
+/* l3_core -> usbhsotg  interface */
+static struct omap_hwmod_ocp_if omap2430_usbhsotg__l3 = {
+	.master		= &omap2430_usbhsotg_hwmod,
+	.slave		= &omap2xxx_l3_main_hwmod,
+	.clk		= "core_l3_ck",
+	.user		= OCP_USER_MPU,
+};
+
+/* L4 CORE -> I2C1 interface */
+static struct omap_hwmod_ocp_if omap2430_l4_core__i2c1 = {
+	.master		= &omap2xxx_l4_core_hwmod,
+	.slave		= &omap2430_i2c1_hwmod,
+	.clk		= "i2c1_ick",
+	.addr		= omap2_i2c1_addr_space,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* L4 CORE -> I2C2 interface */
+static struct omap_hwmod_ocp_if omap2430_l4_core__i2c2 = {
+	.master		= &omap2xxx_l4_core_hwmod,
+	.slave		= &omap2430_i2c2_hwmod,
+	.clk		= "i2c2_ick",
+	.addr		= omap2_i2c2_addr_space,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap2430_usbhsotg_addrs[] = {
+	{
+		.pa_start	= OMAP243X_HS_BASE,
+		.pa_end		= OMAP243X_HS_BASE + SZ_4K - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/*  l4_core ->usbhsotg  interface */
+static struct omap_hwmod_ocp_if omap2430_l4_core__usbhsotg = {
+	.master		= &omap2xxx_l4_core_hwmod,
+	.slave		= &omap2430_usbhsotg_hwmod,
+	.clk		= "usb_l4_ick",
+	.addr		= omap2430_usbhsotg_addrs,
+	.user		= OCP_USER_MPU,
+};
 
+/* L4 CORE -> MMC1 interface */
+static struct omap_hwmod_ocp_if omap2430_l4_core__mmc1 = {
+	.master		= &omap2xxx_l4_core_hwmod,
+	.slave		= &omap2430_mmc1_hwmod,
+	.clk		= "mmchs1_ick",
+	.addr		= omap2430_mmc1_addr_space,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* L4 CORE -> MMC2 interface */
+static struct omap_hwmod_ocp_if omap2430_l4_core__mmc2 = {
+	.master		= &omap2xxx_l4_core_hwmod,
+	.slave		= &omap2430_mmc2_hwmod,
+	.clk		= "mmchs2_ick",
+	.addr		= omap2430_mmc2_addr_space,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4 core -> mcspi3 interface */
+static struct omap_hwmod_ocp_if omap2430_l4_core__mcspi3 = {
+	.master		= &omap2xxx_l4_core_hwmod,
+	.slave		= &omap2430_mcspi3_hwmod,
+	.clk		= "mcspi3_ick",
+	.addr		= omap2430_mcspi3_addr_space,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* IVA2 <- L3 interface */
+static struct omap_hwmod_ocp_if omap2430_l3__iva = {
+	.master		= &omap2xxx_l3_main_hwmod,
+	.slave		= &omap2430_iva_hwmod,
+	.clk		= "core_l3_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap2430_timer1_addrs[] = {
+	{
+		.pa_start	= 0x49018000,
+		.pa_end		= 0x49018000 + SZ_1K - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_wkup -> timer1 */
+static struct omap_hwmod_ocp_if omap2430_l4_wkup__timer1 = {
+	.master		= &omap2xxx_l4_wkup_hwmod,
+	.slave		= &omap2xxx_timer1_hwmod,
+	.clk		= "gpt1_ick",
+	.addr		= omap2430_timer1_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_wkup -> wd_timer2 */
+static struct omap_hwmod_addr_space omap2430_wd_timer2_addrs[] = {
+	{
+		.pa_start	= 0x49016000,
+		.pa_end		= 0x4901607f,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if omap2430_l4_wkup__wd_timer2 = {
+	.master		= &omap2xxx_l4_wkup_hwmod,
+	.slave		= &omap2xxx_wd_timer2_hwmod,
+	.clk		= "mpu_wdt_ick",
+	.addr		= omap2430_wd_timer2_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_wkup -> gpio1 */
+static struct omap_hwmod_addr_space omap2430_gpio1_addr_space[] = {
+	{
+		.pa_start	= 0x4900C000,
+		.pa_end		= 0x4900C1ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio1 = {
+	.master		= &omap2xxx_l4_wkup_hwmod,
+	.slave		= &omap2xxx_gpio1_hwmod,
+	.clk		= "gpios_ick",
+	.addr		= omap2430_gpio1_addr_space,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_wkup -> gpio2 */
+static struct omap_hwmod_addr_space omap2430_gpio2_addr_space[] = {
+	{
+		.pa_start	= 0x4900E000,
+		.pa_end		= 0x4900E1ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio2 = {
+	.master		= &omap2xxx_l4_wkup_hwmod,
+	.slave		= &omap2xxx_gpio2_hwmod,
+	.clk		= "gpios_ick",
+	.addr		= omap2430_gpio2_addr_space,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_wkup -> gpio3 */
+static struct omap_hwmod_addr_space omap2430_gpio3_addr_space[] = {
+	{
+		.pa_start	= 0x49010000,
+		.pa_end		= 0x490101ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio3 = {
+	.master		= &omap2xxx_l4_wkup_hwmod,
+	.slave		= &omap2xxx_gpio3_hwmod,
+	.clk		= "gpios_ick",
+	.addr		= omap2430_gpio3_addr_space,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_wkup -> gpio4 */
+static struct omap_hwmod_addr_space omap2430_gpio4_addr_space[] = {
+	{
+		.pa_start	= 0x49012000,
+		.pa_end		= 0x490121ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio4 = {
+	.master		= &omap2xxx_l4_wkup_hwmod,
+	.slave		= &omap2xxx_gpio4_hwmod,
+	.clk		= "gpios_ick",
+	.addr		= omap2430_gpio4_addr_space,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_core -> gpio5 */
+static struct omap_hwmod_addr_space omap2430_gpio5_addr_space[] = {
+	{
+		.pa_start	= 0x480B6000,
+		.pa_end		= 0x480B61ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if omap2430_l4_core__gpio5 = {
+	.master		= &omap2xxx_l4_core_hwmod,
+	.slave		= &omap2430_gpio5_hwmod,
+	.clk		= "gpio5_ick",
+	.addr		= omap2430_gpio5_addr_space,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* dma_system -> L3 */
+static struct omap_hwmod_ocp_if omap2430_dma_system__l3 = {
+	.master		= &omap2430_dma_system_hwmod,
+	.slave		= &omap2xxx_l3_main_hwmod,
+	.clk		= "core_l3_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_core -> dma_system */
+static struct omap_hwmod_ocp_if omap2430_l4_core__dma_system = {
+	.master		= &omap2xxx_l4_core_hwmod,
+	.slave		= &omap2430_dma_system_hwmod,
+	.clk		= "sdma_ick",
+	.addr		= omap2_dma_system_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_core -> mailbox */
+static struct omap_hwmod_ocp_if omap2430_l4_core__mailbox = {
+	.master		= &omap2xxx_l4_core_hwmod,
+	.slave		= &omap2430_mailbox_hwmod,
+	.addr		= omap2_mailbox_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_core -> mcbsp1 */
+static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp1 = {
+	.master		= &omap2xxx_l4_core_hwmod,
+	.slave		= &omap2430_mcbsp1_hwmod,
+	.clk		= "mcbsp1_ick",
+	.addr		= omap2_mcbsp1_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_core -> mcbsp2 */
+static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp2 = {
+	.master		= &omap2xxx_l4_core_hwmod,
+	.slave		= &omap2430_mcbsp2_hwmod,
+	.clk		= "mcbsp2_ick",
+	.addr		= omap2xxx_mcbsp2_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap2430_mcbsp3_addrs[] = {
+	{
+		.name		= "mpu",
+		.pa_start	= 0x4808C000,
+		.pa_end		= 0x4808C0ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_core -> mcbsp3 */
+static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp3 = {
+	.master		= &omap2xxx_l4_core_hwmod,
+	.slave		= &omap2430_mcbsp3_hwmod,
+	.clk		= "mcbsp3_ick",
+	.addr		= omap2430_mcbsp3_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap2430_mcbsp4_addrs[] = {
+	{
+		.name		= "mpu",
+		.pa_start	= 0x4808E000,
+		.pa_end		= 0x4808E0ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_core -> mcbsp4 */
+static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp4 = {
+	.master		= &omap2xxx_l4_core_hwmod,
+	.slave		= &omap2430_mcbsp4_hwmod,
+	.clk		= "mcbsp4_ick",
+	.addr		= omap2430_mcbsp4_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap2430_mcbsp5_addrs[] = {
+	{
+		.name		= "mpu",
+		.pa_start	= 0x48096000,
+		.pa_end		= 0x480960ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_core -> mcbsp5 */
+static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp5 = {
+	.master		= &omap2xxx_l4_core_hwmod,
+	.slave		= &omap2430_mcbsp5_hwmod,
+	.clk		= "mcbsp5_ick",
+	.addr		= omap2430_mcbsp5_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_core -> hdq1w */
+static struct omap_hwmod_ocp_if omap2430_l4_core__hdq1w = {
+	.master		= &omap2xxx_l4_core_hwmod,
+	.slave		= &omap2430_hdq1w_hwmod,
+	.clk		= "hdq_ick",
+	.addr		= omap2_hdq1w_addr_space,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+	.flags		= OMAP_FIREWALL_L4 | OCPIF_SWSUP_IDLE,
+};
+
+/* l4_wkup -> 32ksync_counter */
+static struct omap_hwmod_addr_space omap2430_counter_32k_addrs[] = {
+	{
+		.pa_start	= 0x49020000,
+		.pa_end		= 0x4902001f,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if omap2430_l4_wkup__counter_32k = {
+	.master		= &omap2xxx_l4_wkup_hwmod,
+	.slave		= &omap2xxx_counter_32k_hwmod,
+	.clk		= "sync_32k_ick",
+	.addr		= omap2430_counter_32k_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if *omap2430_hwmod_ocp_ifs[] __initdata = {
+	&omap2xxx_l3_main__l4_core,
+	&omap2xxx_mpu__l3_main,
+	&omap2xxx_dss__l3,
+	&omap2430_usbhsotg__l3,
+	&omap2430_l4_core__i2c1,
+	&omap2430_l4_core__i2c2,
+	&omap2xxx_l4_core__l4_wkup,
+	&omap2_l4_core__uart1,
+	&omap2_l4_core__uart2,
+	&omap2_l4_core__uart3,
+	&omap2430_l4_core__usbhsotg,
+	&omap2430_l4_core__mmc1,
+	&omap2430_l4_core__mmc2,
+	&omap2xxx_l4_core__mcspi1,
+	&omap2xxx_l4_core__mcspi2,
+	&omap2430_l4_core__mcspi3,
+	&omap2430_l3__iva,
+	&omap2430_l4_wkup__timer1,
+	&omap2xxx_l4_core__timer2,
+	&omap2xxx_l4_core__timer3,
+	&omap2xxx_l4_core__timer4,
+	&omap2xxx_l4_core__timer5,
+	&omap2xxx_l4_core__timer6,
+	&omap2xxx_l4_core__timer7,
+	&omap2xxx_l4_core__timer8,
+	&omap2xxx_l4_core__timer9,
+	&omap2xxx_l4_core__timer10,
+	&omap2xxx_l4_core__timer11,
+	&omap2xxx_l4_core__timer12,
+	&omap2430_l4_wkup__wd_timer2,
+	&omap2xxx_l4_core__dss,
+	&omap2xxx_l4_core__dss_dispc,
+	&omap2xxx_l4_core__dss_rfbi,
+	&omap2xxx_l4_core__dss_venc,
+	&omap2430_l4_wkup__gpio1,
+	&omap2430_l4_wkup__gpio2,
+	&omap2430_l4_wkup__gpio3,
+	&omap2430_l4_wkup__gpio4,
+	&omap2430_l4_core__gpio5,
+	&omap2430_dma_system__l3,
+	&omap2430_l4_core__dma_system,
+	&omap2430_l4_core__mailbox,
+	&omap2430_l4_core__mcbsp1,
+	&omap2430_l4_core__mcbsp2,
+	&omap2430_l4_core__mcbsp3,
+	&omap2430_l4_core__mcbsp4,
+	&omap2430_l4_core__mcbsp5,
+	&omap2430_l4_core__hdq1w,
+	&omap2430_l4_wkup__counter_32k,
 	NULL,
 };
 
 int __init omap2430_hwmod_init(void)
 {
-	return omap_hwmod_register(omap2430_hwmods);
+	return omap_hwmod_register_links(omap2430_hwmod_ocp_ifs);
 }
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c
index 04637fabadd2..cbb4ef6544ad 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c
@@ -171,3 +171,12 @@ struct omap_hwmod_addr_space omap2_mcbsp1_addrs[] = {
 	},
 	{ }
 };
+
+struct omap_hwmod_addr_space omap2_hdq1w_addr_space[] = {
+	{
+		.pa_start       = 0x480b2000,
+		.pa_end         = 0x480b2fff,
+		.flags          = ADDR_TYPE_RT,
+	},
+	{ }
+};
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
index f08e442af397..102d76e9e9ea 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
@@ -2,6 +2,7 @@
  * omap_hwmod_2xxx_3xxx_ipblock_data.c - common IP block data for OMAP2/3
  *
  * Copyright (C) 2011 Nokia Corporation
+ * Copyright (C) 2012 Texas Instruments, Inc.
  * Paul Walmsley
  *
  * This program is free software; you can redistribute it and/or modify
@@ -12,6 +13,7 @@
 #include <plat/serial.h>
 #include <plat/dma.h>
 #include <plat/common.h>
+#include <plat/hdq1w.h>
 
 #include <mach/irqs.h>
 
@@ -302,3 +304,23 @@ struct omap_hwmod_irq_info omap2_mcspi2_mpu_irqs[] = {
 	{ .irq = -1 }
 };
 
+struct omap_hwmod_class_sysconfig omap2_hdq1w_sysc = {
+	.rev_offs	= 0x0,
+	.sysc_offs	= 0x14,
+	.syss_offs	= 0x18,
+	.sysc_flags	= (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
+			   SYSS_HAS_RESET_STATUS),
+	.sysc_fields    = &omap_hwmod_sysc_type1,
+};
+
+struct omap_hwmod_class omap2_hdq1w_class = {
+	.name	= "hdq1w",
+	.sysc	= &omap2_hdq1w_sysc,
+	.reset	= &omap_hdq1w_reset,
+};
+
+struct omap_hwmod_irq_info omap2_hdq1w_mpu_irqs[] = {
+	{ .irq = 58, },
+	{ .irq = -1 }
+};
+
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c
index 4f3547c2a49e..5178e40e84f9 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c
@@ -15,10 +15,12 @@
 
 #include <plat/omap_hwmod.h>
 #include <plat/serial.h>
+#include <plat/l3_2xxx.h>
+#include <plat/l4_2xxx.h>
 
 #include "omap_hwmod_common_data.h"
 
-struct omap_hwmod_addr_space omap2xxx_uart1_addr_space[] = {
+static struct omap_hwmod_addr_space omap2xxx_uart1_addr_space[] = {
 	{
 		.pa_start	= OMAP2_UART1_BASE,
 		.pa_end		= OMAP2_UART1_BASE + SZ_8K - 1,
@@ -27,7 +29,7 @@ struct omap_hwmod_addr_space omap2xxx_uart1_addr_space[] = {
 	{ }
 };
 
-struct omap_hwmod_addr_space omap2xxx_uart2_addr_space[] = {
+static struct omap_hwmod_addr_space omap2xxx_uart2_addr_space[] = {
 	{
 		.pa_start	= OMAP2_UART2_BASE,
 		.pa_end		= OMAP2_UART2_BASE + SZ_1K - 1,
@@ -36,7 +38,7 @@ struct omap_hwmod_addr_space omap2xxx_uart2_addr_space[] = {
 	{ }
 };
 
-struct omap_hwmod_addr_space omap2xxx_uart3_addr_space[] = {
+static struct omap_hwmod_addr_space omap2xxx_uart3_addr_space[] = {
 	{
 		.pa_start	= OMAP2_UART3_BASE,
 		.pa_end		= OMAP2_UART3_BASE + SZ_1K - 1,
@@ -45,7 +47,7 @@ struct omap_hwmod_addr_space omap2xxx_uart3_addr_space[] = {
 	{ }
 };
 
-struct omap_hwmod_addr_space omap2xxx_timer2_addrs[] = {
+static struct omap_hwmod_addr_space omap2xxx_timer2_addrs[] = {
 	{
 		.pa_start	= 0x4802a000,
 		.pa_end		= 0x4802a000 + SZ_1K - 1,
@@ -54,7 +56,7 @@ struct omap_hwmod_addr_space omap2xxx_timer2_addrs[] = {
 	{ }
 };
 
-struct omap_hwmod_addr_space omap2xxx_timer3_addrs[] = {
+static struct omap_hwmod_addr_space omap2xxx_timer3_addrs[] = {
 	{
 		.pa_start	= 0x48078000,
 		.pa_end		= 0x48078000 + SZ_1K - 1,
@@ -63,7 +65,7 @@ struct omap_hwmod_addr_space omap2xxx_timer3_addrs[] = {
 	{ }
 };
 
-struct omap_hwmod_addr_space omap2xxx_timer4_addrs[] = {
+static struct omap_hwmod_addr_space omap2xxx_timer4_addrs[] = {
 	{
 		.pa_start	= 0x4807a000,
 		.pa_end		= 0x4807a000 + SZ_1K - 1,
@@ -72,7 +74,7 @@ struct omap_hwmod_addr_space omap2xxx_timer4_addrs[] = {
 	{ }
 };
 
-struct omap_hwmod_addr_space omap2xxx_timer5_addrs[] = {
+static struct omap_hwmod_addr_space omap2xxx_timer5_addrs[] = {
 	{
 		.pa_start	= 0x4807c000,
 		.pa_end		= 0x4807c000 + SZ_1K - 1,
@@ -81,7 +83,7 @@ struct omap_hwmod_addr_space omap2xxx_timer5_addrs[] = {
 	{ }
 };
 
-struct omap_hwmod_addr_space omap2xxx_timer6_addrs[] = {
+static struct omap_hwmod_addr_space omap2xxx_timer6_addrs[] = {
 	{
 		.pa_start	= 0x4807e000,
 		.pa_end		= 0x4807e000 + SZ_1K - 1,
@@ -90,7 +92,7 @@ struct omap_hwmod_addr_space omap2xxx_timer6_addrs[] = {
 	{ }
 };
 
-struct omap_hwmod_addr_space omap2xxx_timer7_addrs[] = {
+static struct omap_hwmod_addr_space omap2xxx_timer7_addrs[] = {
 	{
 		.pa_start	= 0x48080000,
 		.pa_end		= 0x48080000 + SZ_1K - 1,
@@ -99,7 +101,7 @@ struct omap_hwmod_addr_space omap2xxx_timer7_addrs[] = {
 	{ }
 };
 
-struct omap_hwmod_addr_space omap2xxx_timer8_addrs[] = {
+static struct omap_hwmod_addr_space omap2xxx_timer8_addrs[] = {
 	{
 		.pa_start	= 0x48082000,
 		.pa_end		= 0x48082000 + SZ_1K - 1,
@@ -108,7 +110,7 @@ struct omap_hwmod_addr_space omap2xxx_timer8_addrs[] = {
 	{ }
 };
 
-struct omap_hwmod_addr_space omap2xxx_timer9_addrs[] = {
+static struct omap_hwmod_addr_space omap2xxx_timer9_addrs[] = {
 	{
 		.pa_start	= 0x48084000,
 		.pa_end		= 0x48084000 + SZ_1K - 1,
@@ -127,4 +129,246 @@ struct omap_hwmod_addr_space omap2xxx_mcbsp2_addrs[] = {
 	{ }
 };
 
+/*
+ * Common interconnect data
+ */
+
+/* L3 -> L4_CORE interface */
+struct omap_hwmod_ocp_if omap2xxx_l3_main__l4_core = {
+	.master	= &omap2xxx_l3_main_hwmod,
+	.slave	= &omap2xxx_l4_core_hwmod,
+	.user	= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* MPU -> L3 interface */
+struct omap_hwmod_ocp_if omap2xxx_mpu__l3_main = {
+	.master = &omap2xxx_mpu_hwmod,
+	.slave	= &omap2xxx_l3_main_hwmod,
+	.user	= OCP_USER_MPU,
+};
+
+/* DSS -> l3 */
+struct omap_hwmod_ocp_if omap2xxx_dss__l3 = {
+	.master		= &omap2xxx_dss_core_hwmod,
+	.slave		= &omap2xxx_l3_main_hwmod,
+	.fw = {
+		.omap2 = {
+			.l3_perm_bit  = OMAP2_L3_CORE_FW_CONNID_DSS,
+			.flags	= OMAP_FIREWALL_L3,
+		}
+	},
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* L4_CORE -> L4_WKUP interface */
+struct omap_hwmod_ocp_if omap2xxx_l4_core__l4_wkup = {
+	.master	= &omap2xxx_l4_core_hwmod,
+	.slave	= &omap2xxx_l4_wkup_hwmod,
+	.user	= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* L4 CORE -> UART1 interface */
+struct omap_hwmod_ocp_if omap2_l4_core__uart1 = {
+	.master		= &omap2xxx_l4_core_hwmod,
+	.slave		= &omap2xxx_uart1_hwmod,
+	.clk		= "uart1_ick",
+	.addr		= omap2xxx_uart1_addr_space,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* L4 CORE -> UART2 interface */
+struct omap_hwmod_ocp_if omap2_l4_core__uart2 = {
+	.master		= &omap2xxx_l4_core_hwmod,
+	.slave		= &omap2xxx_uart2_hwmod,
+	.clk		= "uart2_ick",
+	.addr		= omap2xxx_uart2_addr_space,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* L4 PER -> UART3 interface */
+struct omap_hwmod_ocp_if omap2_l4_core__uart3 = {
+	.master		= &omap2xxx_l4_core_hwmod,
+	.slave		= &omap2xxx_uart3_hwmod,
+	.clk		= "uart3_ick",
+	.addr		= omap2xxx_uart3_addr_space,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4 core -> mcspi1 interface */
+struct omap_hwmod_ocp_if omap2xxx_l4_core__mcspi1 = {
+	.master		= &omap2xxx_l4_core_hwmod,
+	.slave		= &omap2xxx_mcspi1_hwmod,
+	.clk		= "mcspi1_ick",
+	.addr		= omap2_mcspi1_addr_space,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4 core -> mcspi2 interface */
+struct omap_hwmod_ocp_if omap2xxx_l4_core__mcspi2 = {
+	.master		= &omap2xxx_l4_core_hwmod,
+	.slave		= &omap2xxx_mcspi2_hwmod,
+	.clk		= "mcspi2_ick",
+	.addr		= omap2_mcspi2_addr_space,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_core -> timer2 */
+struct omap_hwmod_ocp_if omap2xxx_l4_core__timer2 = {
+	.master		= &omap2xxx_l4_core_hwmod,
+	.slave		= &omap2xxx_timer2_hwmod,
+	.clk		= "gpt2_ick",
+	.addr		= omap2xxx_timer2_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_core -> timer3 */
+struct omap_hwmod_ocp_if omap2xxx_l4_core__timer3 = {
+	.master		= &omap2xxx_l4_core_hwmod,
+	.slave		= &omap2xxx_timer3_hwmod,
+	.clk		= "gpt3_ick",
+	.addr		= omap2xxx_timer3_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_core -> timer4 */
+struct omap_hwmod_ocp_if omap2xxx_l4_core__timer4 = {
+	.master		= &omap2xxx_l4_core_hwmod,
+	.slave		= &omap2xxx_timer4_hwmod,
+	.clk		= "gpt4_ick",
+	.addr		= omap2xxx_timer4_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_core -> timer5 */
+struct omap_hwmod_ocp_if omap2xxx_l4_core__timer5 = {
+	.master		= &omap2xxx_l4_core_hwmod,
+	.slave		= &omap2xxx_timer5_hwmod,
+	.clk		= "gpt5_ick",
+	.addr		= omap2xxx_timer5_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_core -> timer6 */
+struct omap_hwmod_ocp_if omap2xxx_l4_core__timer6 = {
+	.master		= &omap2xxx_l4_core_hwmod,
+	.slave		= &omap2xxx_timer6_hwmod,
+	.clk		= "gpt6_ick",
+	.addr		= omap2xxx_timer6_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_core -> timer7 */
+struct omap_hwmod_ocp_if omap2xxx_l4_core__timer7 = {
+	.master		= &omap2xxx_l4_core_hwmod,
+	.slave		= &omap2xxx_timer7_hwmod,
+	.clk		= "gpt7_ick",
+	.addr		= omap2xxx_timer7_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_core -> timer8 */
+struct omap_hwmod_ocp_if omap2xxx_l4_core__timer8 = {
+	.master		= &omap2xxx_l4_core_hwmod,
+	.slave		= &omap2xxx_timer8_hwmod,
+	.clk		= "gpt8_ick",
+	.addr		= omap2xxx_timer8_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_core -> timer9 */
+struct omap_hwmod_ocp_if omap2xxx_l4_core__timer9 = {
+	.master		= &omap2xxx_l4_core_hwmod,
+	.slave		= &omap2xxx_timer9_hwmod,
+	.clk		= "gpt9_ick",
+	.addr		= omap2xxx_timer9_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_core -> timer10 */
+struct omap_hwmod_ocp_if omap2xxx_l4_core__timer10 = {
+	.master		= &omap2xxx_l4_core_hwmod,
+	.slave		= &omap2xxx_timer10_hwmod,
+	.clk		= "gpt10_ick",
+	.addr		= omap2_timer10_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_core -> timer11 */
+struct omap_hwmod_ocp_if omap2xxx_l4_core__timer11 = {
+	.master		= &omap2xxx_l4_core_hwmod,
+	.slave		= &omap2xxx_timer11_hwmod,
+	.clk		= "gpt11_ick",
+	.addr		= omap2_timer11_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_core -> timer12 */
+struct omap_hwmod_ocp_if omap2xxx_l4_core__timer12 = {
+	.master		= &omap2xxx_l4_core_hwmod,
+	.slave		= &omap2xxx_timer12_hwmod,
+	.clk		= "gpt12_ick",
+	.addr		= omap2xxx_timer12_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_core -> dss */
+struct omap_hwmod_ocp_if omap2xxx_l4_core__dss = {
+	.master		= &omap2xxx_l4_core_hwmod,
+	.slave		= &omap2xxx_dss_core_hwmod,
+	.clk		= "dss_ick",
+	.addr		= omap2_dss_addrs,
+	.fw = {
+		.omap2 = {
+			.l4_fw_region  = OMAP2420_L4_CORE_FW_DSS_CORE_REGION,
+			.flags	= OMAP_FIREWALL_L4,
+		}
+	},
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_core -> dss_dispc */
+struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_dispc = {
+	.master		= &omap2xxx_l4_core_hwmod,
+	.slave		= &omap2xxx_dss_dispc_hwmod,
+	.clk		= "dss_ick",
+	.addr		= omap2_dss_dispc_addrs,
+	.fw = {
+		.omap2 = {
+			.l4_fw_region  = OMAP2420_L4_CORE_FW_DSS_DISPC_REGION,
+			.flags	= OMAP_FIREWALL_L4,
+		}
+	},
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_core -> dss_rfbi */
+struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_rfbi = {
+	.master		= &omap2xxx_l4_core_hwmod,
+	.slave		= &omap2xxx_dss_rfbi_hwmod,
+	.clk		= "dss_ick",
+	.addr		= omap2_dss_rfbi_addrs,
+	.fw = {
+		.omap2 = {
+			.l4_fw_region  = OMAP2420_L4_CORE_FW_DSS_CORE_REGION,
+			.flags	= OMAP_FIREWALL_L4,
+		}
+	},
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_core -> dss_venc */
+struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_venc = {
+	.master		= &omap2xxx_l4_core_hwmod,
+	.slave		= &omap2xxx_dss_venc_hwmod,
+	.clk		= "dss_ick",
+	.addr		= omap2_dss_venc_addrs,
+	.fw = {
+		.omap2 = {
+			.l4_fw_region  = OMAP2420_L4_CORE_FW_DSS_VENC_REGION,
+			.flags	= OMAP_FIREWALL_L4,
+		}
+	},
+	.flags		= OCPIF_SWSUP_IDLE,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
index 2a6729741b06..83eafd96ecaa 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
@@ -10,6 +10,7 @@
  */
 #include <plat/omap_hwmod.h>
 #include <plat/serial.h>
+#include <plat/gpio.h>
 #include <plat/dma.h>
 #include <plat/dmtimer.h>
 #include <plat/mcspi.h>
@@ -17,6 +18,8 @@
 #include <mach/irqs.h>
 
 #include "omap_hwmod_common_data.h"
+#include "cm-regbits-24xx.h"
+#include "prm-regbits-24xx.h"
 #include "wd_timer.h"
 
 struct omap_hwmod_irq_info omap2xxx_timer12_mpu_irqs[] = {
@@ -86,7 +89,8 @@ static struct omap_hwmod_class_sysconfig omap2xxx_wd_timer_sysc = {
 struct omap_hwmod_class omap2xxx_wd_timer_hwmod_class = {
 	.name		= "wd_timer",
 	.sysc		= &omap2xxx_wd_timer_sysc,
-	.pre_shutdown	= &omap2_wd_timer_disable
+	.pre_shutdown	= &omap2_wd_timer_disable,
+	.reset		= &omap2_wd_timer_reset,
 };
 
 /*
@@ -170,3 +174,582 @@ struct omap_hwmod_class omap2xxx_mcspi_class = {
 	.sysc	= &omap2xxx_mcspi_sysc,
 	.rev	= OMAP2_MCSPI_REV,
 };
+
+/*
+ * IP blocks
+ */
+
+/* L3 */
+struct omap_hwmod omap2xxx_l3_main_hwmod = {
+	.name		= "l3_main",
+	.class		= &l3_hwmod_class,
+	.flags		= HWMOD_NO_IDLEST,
+};
+
+/* L4 CORE */
+struct omap_hwmod omap2xxx_l4_core_hwmod = {
+	.name		= "l4_core",
+	.class		= &l4_hwmod_class,
+	.flags		= HWMOD_NO_IDLEST,
+};
+
+/* L4 WKUP */
+struct omap_hwmod omap2xxx_l4_wkup_hwmod = {
+	.name		= "l4_wkup",
+	.class		= &l4_hwmod_class,
+	.flags		= HWMOD_NO_IDLEST,
+};
+
+/* MPU */
+struct omap_hwmod omap2xxx_mpu_hwmod = {
+	.name		= "mpu",
+	.class		= &mpu_hwmod_class,
+	.main_clk	= "mpu_ck",
+};
+
+/* IVA2 */
+struct omap_hwmod omap2xxx_iva_hwmod = {
+	.name		= "iva",
+	.class		= &iva_hwmod_class,
+};
+
+/* always-on timers dev attribute */
+static struct omap_timer_capability_dev_attr capability_alwon_dev_attr = {
+	.timer_capability       = OMAP_TIMER_ALWON,
+};
+
+/* pwm timers dev attribute */
+static struct omap_timer_capability_dev_attr capability_pwm_dev_attr = {
+	.timer_capability       = OMAP_TIMER_HAS_PWM,
+};
+
+/* timer1 */
+
+struct omap_hwmod omap2xxx_timer1_hwmod = {
+	.name		= "timer1",
+	.mpu_irqs	= omap2_timer1_mpu_irqs,
+	.main_clk	= "gpt1_fck",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_GPT1_SHIFT,
+			.module_offs = WKUP_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_ST_GPT1_SHIFT,
+		},
+	},
+	.dev_attr	= &capability_alwon_dev_attr,
+	.class		= &omap2xxx_timer_hwmod_class,
+};
+
+/* timer2 */
+
+struct omap_hwmod omap2xxx_timer2_hwmod = {
+	.name		= "timer2",
+	.mpu_irqs	= omap2_timer2_mpu_irqs,
+	.main_clk	= "gpt2_fck",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_GPT2_SHIFT,
+			.module_offs = CORE_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_ST_GPT2_SHIFT,
+		},
+	},
+	.dev_attr	= &capability_alwon_dev_attr,
+	.class		= &omap2xxx_timer_hwmod_class,
+};
+
+/* timer3 */
+
+struct omap_hwmod omap2xxx_timer3_hwmod = {
+	.name		= "timer3",
+	.mpu_irqs	= omap2_timer3_mpu_irqs,
+	.main_clk	= "gpt3_fck",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_GPT3_SHIFT,
+			.module_offs = CORE_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_ST_GPT3_SHIFT,
+		},
+	},
+	.dev_attr	= &capability_alwon_dev_attr,
+	.class		= &omap2xxx_timer_hwmod_class,
+};
+
+/* timer4 */
+
+struct omap_hwmod omap2xxx_timer4_hwmod = {
+	.name		= "timer4",
+	.mpu_irqs	= omap2_timer4_mpu_irqs,
+	.main_clk	= "gpt4_fck",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_GPT4_SHIFT,
+			.module_offs = CORE_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_ST_GPT4_SHIFT,
+		},
+	},
+	.dev_attr	= &capability_alwon_dev_attr,
+	.class		= &omap2xxx_timer_hwmod_class,
+};
+
+/* timer5 */
+
+struct omap_hwmod omap2xxx_timer5_hwmod = {
+	.name		= "timer5",
+	.mpu_irqs	= omap2_timer5_mpu_irqs,
+	.main_clk	= "gpt5_fck",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_GPT5_SHIFT,
+			.module_offs = CORE_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_ST_GPT5_SHIFT,
+		},
+	},
+	.dev_attr	= &capability_alwon_dev_attr,
+	.class		= &omap2xxx_timer_hwmod_class,
+};
+
+/* timer6 */
+
+struct omap_hwmod omap2xxx_timer6_hwmod = {
+	.name		= "timer6",
+	.mpu_irqs	= omap2_timer6_mpu_irqs,
+	.main_clk	= "gpt6_fck",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_GPT6_SHIFT,
+			.module_offs = CORE_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_ST_GPT6_SHIFT,
+		},
+	},
+	.dev_attr	= &capability_alwon_dev_attr,
+	.class		= &omap2xxx_timer_hwmod_class,
+};
+
+/* timer7 */
+
+struct omap_hwmod omap2xxx_timer7_hwmod = {
+	.name		= "timer7",
+	.mpu_irqs	= omap2_timer7_mpu_irqs,
+	.main_clk	= "gpt7_fck",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_GPT7_SHIFT,
+			.module_offs = CORE_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_ST_GPT7_SHIFT,
+		},
+	},
+	.dev_attr	= &capability_alwon_dev_attr,
+	.class		= &omap2xxx_timer_hwmod_class,
+};
+
+/* timer8 */
+
+struct omap_hwmod omap2xxx_timer8_hwmod = {
+	.name		= "timer8",
+	.mpu_irqs	= omap2_timer8_mpu_irqs,
+	.main_clk	= "gpt8_fck",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_GPT8_SHIFT,
+			.module_offs = CORE_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_ST_GPT8_SHIFT,
+		},
+	},
+	.dev_attr	= &capability_alwon_dev_attr,
+	.class		= &omap2xxx_timer_hwmod_class,
+};
+
+/* timer9 */
+
+struct omap_hwmod omap2xxx_timer9_hwmod = {
+	.name		= "timer9",
+	.mpu_irqs	= omap2_timer9_mpu_irqs,
+	.main_clk	= "gpt9_fck",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_GPT9_SHIFT,
+			.module_offs = CORE_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_ST_GPT9_SHIFT,
+		},
+	},
+	.dev_attr	= &capability_pwm_dev_attr,
+	.class		= &omap2xxx_timer_hwmod_class,
+};
+
+/* timer10 */
+
+struct omap_hwmod omap2xxx_timer10_hwmod = {
+	.name		= "timer10",
+	.mpu_irqs	= omap2_timer10_mpu_irqs,
+	.main_clk	= "gpt10_fck",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_GPT10_SHIFT,
+			.module_offs = CORE_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_ST_GPT10_SHIFT,
+		},
+	},
+	.dev_attr	= &capability_pwm_dev_attr,
+	.class		= &omap2xxx_timer_hwmod_class,
+};
+
+/* timer11 */
+
+struct omap_hwmod omap2xxx_timer11_hwmod = {
+	.name		= "timer11",
+	.mpu_irqs	= omap2_timer11_mpu_irqs,
+	.main_clk	= "gpt11_fck",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_GPT11_SHIFT,
+			.module_offs = CORE_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_ST_GPT11_SHIFT,
+		},
+	},
+	.dev_attr	= &capability_pwm_dev_attr,
+	.class		= &omap2xxx_timer_hwmod_class,
+};
+
+/* timer12 */
+
+struct omap_hwmod omap2xxx_timer12_hwmod = {
+	.name		= "timer12",
+	.mpu_irqs	= omap2xxx_timer12_mpu_irqs,
+	.main_clk	= "gpt12_fck",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_GPT12_SHIFT,
+			.module_offs = CORE_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_ST_GPT12_SHIFT,
+		},
+	},
+	.dev_attr	= &capability_pwm_dev_attr,
+	.class		= &omap2xxx_timer_hwmod_class,
+};
+
+/* wd_timer2 */
+struct omap_hwmod omap2xxx_wd_timer2_hwmod = {
+	.name		= "wd_timer2",
+	.class		= &omap2xxx_wd_timer_hwmod_class,
+	.main_clk	= "mpu_wdt_fck",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_MPU_WDT_SHIFT,
+			.module_offs = WKUP_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_ST_MPU_WDT_SHIFT,
+		},
+	},
+};
+
+/* UART1 */
+
+struct omap_hwmod omap2xxx_uart1_hwmod = {
+	.name		= "uart1",
+	.mpu_irqs	= omap2_uart1_mpu_irqs,
+	.sdma_reqs	= omap2_uart1_sdma_reqs,
+	.main_clk	= "uart1_fck",
+	.prcm		= {
+		.omap2 = {
+			.module_offs = CORE_MOD,
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_UART1_SHIFT,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_EN_UART1_SHIFT,
+		},
+	},
+	.class		= &omap2_uart_class,
+};
+
+/* UART2 */
+
+struct omap_hwmod omap2xxx_uart2_hwmod = {
+	.name		= "uart2",
+	.mpu_irqs	= omap2_uart2_mpu_irqs,
+	.sdma_reqs	= omap2_uart2_sdma_reqs,
+	.main_clk	= "uart2_fck",
+	.prcm		= {
+		.omap2 = {
+			.module_offs = CORE_MOD,
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_UART2_SHIFT,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_EN_UART2_SHIFT,
+		},
+	},
+	.class		= &omap2_uart_class,
+};
+
+/* UART3 */
+
+struct omap_hwmod omap2xxx_uart3_hwmod = {
+	.name		= "uart3",
+	.mpu_irqs	= omap2_uart3_mpu_irqs,
+	.sdma_reqs	= omap2_uart3_sdma_reqs,
+	.main_clk	= "uart3_fck",
+	.prcm		= {
+		.omap2 = {
+			.module_offs = CORE_MOD,
+			.prcm_reg_id = 2,
+			.module_bit = OMAP24XX_EN_UART3_SHIFT,
+			.idlest_reg_id = 2,
+			.idlest_idle_bit = OMAP24XX_EN_UART3_SHIFT,
+		},
+	},
+	.class		= &omap2_uart_class,
+};
+
+/* dss */
+
+static struct omap_hwmod_opt_clk dss_opt_clks[] = {
+	/*
+	 * The DSS HW needs all DSS clocks enabled during reset. The dss_core
+	 * driver does not use these clocks.
+	 */
+	{ .role = "tv_clk", .clk = "dss_54m_fck" },
+	{ .role = "sys_clk", .clk = "dss2_fck" },
+};
+
+struct omap_hwmod omap2xxx_dss_core_hwmod = {
+	.name		= "dss_core",
+	.class		= &omap2_dss_hwmod_class,
+	.main_clk	= "dss1_fck", /* instead of dss_fck */
+	.sdma_reqs	= omap2xxx_dss_sdma_chs,
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_DSS1_SHIFT,
+			.module_offs = CORE_MOD,
+			.idlest_reg_id = 1,
+			.idlest_stdby_bit = OMAP24XX_ST_DSS_SHIFT,
+		},
+	},
+	.opt_clks	= dss_opt_clks,
+	.opt_clks_cnt = ARRAY_SIZE(dss_opt_clks),
+	.flags		= HWMOD_NO_IDLEST | HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+};
+
+struct omap_hwmod omap2xxx_dss_dispc_hwmod = {
+	.name		= "dss_dispc",
+	.class		= &omap2_dispc_hwmod_class,
+	.mpu_irqs	= omap2_dispc_irqs,
+	.main_clk	= "dss1_fck",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_DSS1_SHIFT,
+			.module_offs = CORE_MOD,
+			.idlest_reg_id = 1,
+			.idlest_stdby_bit = OMAP24XX_ST_DSS_SHIFT,
+		},
+	},
+	.flags		= HWMOD_NO_IDLEST,
+	.dev_attr	= &omap2_3_dss_dispc_dev_attr
+};
+
+static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = {
+	{ .role = "ick", .clk = "dss_ick" },
+};
+
+struct omap_hwmod omap2xxx_dss_rfbi_hwmod = {
+	.name		= "dss_rfbi",
+	.class		= &omap2_rfbi_hwmod_class,
+	.main_clk	= "dss1_fck",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_DSS1_SHIFT,
+			.module_offs = CORE_MOD,
+		},
+	},
+	.opt_clks	= dss_rfbi_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(dss_rfbi_opt_clks),
+	.flags		= HWMOD_NO_IDLEST,
+};
+
+struct omap_hwmod omap2xxx_dss_venc_hwmod = {
+	.name		= "dss_venc",
+	.class		= &omap2_venc_hwmod_class,
+	.main_clk	= "dss_54m_fck",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_DSS1_SHIFT,
+			.module_offs = CORE_MOD,
+		},
+	},
+	.flags		= HWMOD_NO_IDLEST,
+};
+
+/* gpio dev_attr */
+struct omap_gpio_dev_attr omap2xxx_gpio_dev_attr = {
+	.bank_width = 32,
+	.dbck_flag = false,
+};
+
+/* gpio1 */
+struct omap_hwmod omap2xxx_gpio1_hwmod = {
+	.name		= "gpio1",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+	.mpu_irqs	= omap2_gpio1_irqs,
+	.main_clk	= "gpios_fck",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_GPIOS_SHIFT,
+			.module_offs = WKUP_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT,
+		},
+	},
+	.class		= &omap2xxx_gpio_hwmod_class,
+	.dev_attr	= &omap2xxx_gpio_dev_attr,
+};
+
+/* gpio2 */
+struct omap_hwmod omap2xxx_gpio2_hwmod = {
+	.name		= "gpio2",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+	.mpu_irqs	= omap2_gpio2_irqs,
+	.main_clk	= "gpios_fck",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_GPIOS_SHIFT,
+			.module_offs = WKUP_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT,
+		},
+	},
+	.class		= &omap2xxx_gpio_hwmod_class,
+	.dev_attr	= &omap2xxx_gpio_dev_attr,
+};
+
+/* gpio3 */
+struct omap_hwmod omap2xxx_gpio3_hwmod = {
+	.name		= "gpio3",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+	.mpu_irqs	= omap2_gpio3_irqs,
+	.main_clk	= "gpios_fck",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_GPIOS_SHIFT,
+			.module_offs = WKUP_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT,
+		},
+	},
+	.class		= &omap2xxx_gpio_hwmod_class,
+	.dev_attr	= &omap2xxx_gpio_dev_attr,
+};
+
+/* gpio4 */
+struct omap_hwmod omap2xxx_gpio4_hwmod = {
+	.name		= "gpio4",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+	.mpu_irqs	= omap2_gpio4_irqs,
+	.main_clk	= "gpios_fck",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_GPIOS_SHIFT,
+			.module_offs = WKUP_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT,
+		},
+	},
+	.class		= &omap2xxx_gpio_hwmod_class,
+	.dev_attr	= &omap2xxx_gpio_dev_attr,
+};
+
+/* mcspi1 */
+static struct omap2_mcspi_dev_attr omap_mcspi1_dev_attr = {
+	.num_chipselect = 4,
+};
+
+struct omap_hwmod omap2xxx_mcspi1_hwmod = {
+	.name		= "mcspi1",
+	.mpu_irqs	= omap2_mcspi1_mpu_irqs,
+	.sdma_reqs	= omap2_mcspi1_sdma_reqs,
+	.main_clk	= "mcspi1_fck",
+	.prcm		= {
+		.omap2 = {
+			.module_offs = CORE_MOD,
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_MCSPI1_SHIFT,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_ST_MCSPI1_SHIFT,
+		},
+	},
+	.class		= &omap2xxx_mcspi_class,
+	.dev_attr	= &omap_mcspi1_dev_attr,
+};
+
+/* mcspi2 */
+static struct omap2_mcspi_dev_attr omap_mcspi2_dev_attr = {
+	.num_chipselect = 2,
+};
+
+struct omap_hwmod omap2xxx_mcspi2_hwmod = {
+	.name		= "mcspi2",
+	.mpu_irqs	= omap2_mcspi2_mpu_irqs,
+	.sdma_reqs	= omap2_mcspi2_sdma_reqs,
+	.main_clk	= "mcspi2_fck",
+	.prcm		= {
+		.omap2 = {
+			.module_offs = CORE_MOD,
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_MCSPI2_SHIFT,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_ST_MCSPI2_SHIFT,
+		},
+	},
+	.class		= &omap2xxx_mcspi_class,
+	.dev_attr	= &omap_mcspi2_dev_attr,
+};
+
+
+static struct omap_hwmod_class omap2xxx_counter_hwmod_class = {
+	.name	= "counter",
+};
+
+struct omap_hwmod omap2xxx_counter_32k_hwmod = {
+	.name		= "counter_32k",
+	.main_clk	= "func_32k_ck",
+	.prcm		= {
+		.omap2	= {
+			.module_offs = WKUP_MOD,
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_ST_32KSYNC_SHIFT,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_ST_32KSYNC_SHIFT,
+		},
+	},
+	.class		= &omap2xxx_counter_hwmod_class,
+};
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 34b9766d1d23..b26d3c9bca16 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -2,6 +2,7 @@
  * omap_hwmod_3xxx_data.c - hardware modules present on the OMAP3xxx chips
  *
  * Copyright (C) 2009-2011 Nokia Corporation
+ * Copyright (C) 2012 Texas Instruments, Inc.
  * Paul Walmsley
  *
  * This program is free software; you can redistribute it and/or modify
@@ -38,491 +39,56 @@
 /*
  * OMAP3xxx hardware module integration data
  *
- * ALl of the data in this section should be autogeneratable from the
+ * All of the data in this section should be autogeneratable from the
  * TI hardware database or other technical documentation.  Data that
  * is driver-specific or driver-kernel integration-specific belongs
  * elsewhere.
  */
 
-static struct omap_hwmod omap3xxx_mpu_hwmod;
-static struct omap_hwmod omap3xxx_iva_hwmod;
-static struct omap_hwmod omap3xxx_l3_main_hwmod;
-static struct omap_hwmod omap3xxx_l4_core_hwmod;
-static struct omap_hwmod omap3xxx_l4_per_hwmod;
-static struct omap_hwmod omap3xxx_wd_timer2_hwmod;
-static struct omap_hwmod omap3430es1_dss_core_hwmod;
-static struct omap_hwmod omap3xxx_dss_core_hwmod;
-static struct omap_hwmod omap3xxx_dss_dispc_hwmod;
-static struct omap_hwmod omap3xxx_dss_dsi1_hwmod;
-static struct omap_hwmod omap3xxx_dss_rfbi_hwmod;
-static struct omap_hwmod omap3xxx_dss_venc_hwmod;
-static struct omap_hwmod omap3xxx_i2c1_hwmod;
-static struct omap_hwmod omap3xxx_i2c2_hwmod;
-static struct omap_hwmod omap3xxx_i2c3_hwmod;
-static struct omap_hwmod omap3xxx_gpio1_hwmod;
-static struct omap_hwmod omap3xxx_gpio2_hwmod;
-static struct omap_hwmod omap3xxx_gpio3_hwmod;
-static struct omap_hwmod omap3xxx_gpio4_hwmod;
-static struct omap_hwmod omap3xxx_gpio5_hwmod;
-static struct omap_hwmod omap3xxx_gpio6_hwmod;
-static struct omap_hwmod omap34xx_sr1_hwmod;
-static struct omap_hwmod omap34xx_sr2_hwmod;
-static struct omap_hwmod omap34xx_mcspi1;
-static struct omap_hwmod omap34xx_mcspi2;
-static struct omap_hwmod omap34xx_mcspi3;
-static struct omap_hwmod omap34xx_mcspi4;
-static struct omap_hwmod omap3xxx_mmc1_hwmod;
-static struct omap_hwmod omap3xxx_mmc2_hwmod;
-static struct omap_hwmod omap3xxx_mmc3_hwmod;
-static struct omap_hwmod am35xx_usbhsotg_hwmod;
-
-static struct omap_hwmod omap3xxx_dma_system_hwmod;
-
-static struct omap_hwmod omap3xxx_mcbsp1_hwmod;
-static struct omap_hwmod omap3xxx_mcbsp2_hwmod;
-static struct omap_hwmod omap3xxx_mcbsp3_hwmod;
-static struct omap_hwmod omap3xxx_mcbsp4_hwmod;
-static struct omap_hwmod omap3xxx_mcbsp5_hwmod;
-static struct omap_hwmod omap3xxx_mcbsp2_sidetone_hwmod;
-static struct omap_hwmod omap3xxx_mcbsp3_sidetone_hwmod;
-static struct omap_hwmod omap3xxx_usb_host_hs_hwmod;
-static struct omap_hwmod omap3xxx_usb_tll_hs_hwmod;
-
-/* L3 -> L4_CORE interface */
-static struct omap_hwmod_ocp_if omap3xxx_l3_main__l4_core = {
-	.master	= &omap3xxx_l3_main_hwmod,
-	.slave	= &omap3xxx_l4_core_hwmod,
-	.user	= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* L3 -> L4_PER interface */
-static struct omap_hwmod_ocp_if omap3xxx_l3_main__l4_per = {
-	.master = &omap3xxx_l3_main_hwmod,
-	.slave	= &omap3xxx_l4_per_hwmod,
-	.user	= OCP_USER_MPU | OCP_USER_SDMA,
-};
+/*
+ * IP blocks
+ */
 
-/* L3 taret configuration and error log registers */
+/* L3 */
 static struct omap_hwmod_irq_info omap3xxx_l3_main_irqs[] = {
 	{ .irq = INT_34XX_L3_DBG_IRQ },
 	{ .irq = INT_34XX_L3_APP_IRQ },
 	{ .irq = -1 }
 };
 
-static struct omap_hwmod_addr_space omap3xxx_l3_main_addrs[] = {
-	{
-		.pa_start       = 0x68000000,
-		.pa_end         = 0x6800ffff,
-		.flags          = ADDR_TYPE_RT,
-	},
-	{ }
-};
-
-/* MPU -> L3 interface */
-static struct omap_hwmod_ocp_if omap3xxx_mpu__l3_main = {
-	.master   = &omap3xxx_mpu_hwmod,
-	.slave    = &omap3xxx_l3_main_hwmod,
-	.addr     = omap3xxx_l3_main_addrs,
-	.user	= OCP_USER_MPU,
-};
-
-/* Slave interfaces on the L3 interconnect */
-static struct omap_hwmod_ocp_if *omap3xxx_l3_main_slaves[] = {
-	&omap3xxx_mpu__l3_main,
-};
-
-/* DSS -> l3 */
-static struct omap_hwmod_ocp_if omap3xxx_dss__l3 = {
-	.master		= &omap3xxx_dss_core_hwmod,
-	.slave		= &omap3xxx_l3_main_hwmod,
-	.fw = {
-		.omap2 = {
-			.l3_perm_bit  = OMAP3_L3_CORE_FW_INIT_ID_DSS,
-			.flags	= OMAP_FIREWALL_L3,
-		}
-	},
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* Master interfaces on the L3 interconnect */
-static struct omap_hwmod_ocp_if *omap3xxx_l3_main_masters[] = {
-	&omap3xxx_l3_main__l4_core,
-	&omap3xxx_l3_main__l4_per,
-};
-
-/* L3 */
 static struct omap_hwmod omap3xxx_l3_main_hwmod = {
 	.name		= "l3_main",
 	.class		= &l3_hwmod_class,
 	.mpu_irqs	= omap3xxx_l3_main_irqs,
-	.masters	= omap3xxx_l3_main_masters,
-	.masters_cnt	= ARRAY_SIZE(omap3xxx_l3_main_masters),
-	.slaves		= omap3xxx_l3_main_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_l3_main_slaves),
 	.flags		= HWMOD_NO_IDLEST,
 };
 
-static struct omap_hwmod omap3xxx_l4_wkup_hwmod;
-static struct omap_hwmod omap3xxx_uart1_hwmod;
-static struct omap_hwmod omap3xxx_uart2_hwmod;
-static struct omap_hwmod omap3xxx_uart3_hwmod;
-static struct omap_hwmod omap3xxx_uart4_hwmod;
-static struct omap_hwmod am35xx_uart4_hwmod;
-static struct omap_hwmod omap3xxx_usbhsotg_hwmod;
-
-/* l3_core -> usbhsotg interface */
-static struct omap_hwmod_ocp_if omap3xxx_usbhsotg__l3 = {
-	.master		= &omap3xxx_usbhsotg_hwmod,
-	.slave		= &omap3xxx_l3_main_hwmod,
-	.clk		= "core_l3_ick",
-	.user		= OCP_USER_MPU,
-};
-
-/* l3_core -> am35xx_usbhsotg interface */
-static struct omap_hwmod_ocp_if am35xx_usbhsotg__l3 = {
-	.master		= &am35xx_usbhsotg_hwmod,
-	.slave		= &omap3xxx_l3_main_hwmod,
-	.clk		= "core_l3_ick",
-	.user		= OCP_USER_MPU,
-};
-/* L4_CORE -> L4_WKUP interface */
-static struct omap_hwmod_ocp_if omap3xxx_l4_core__l4_wkup = {
-	.master	= &omap3xxx_l4_core_hwmod,
-	.slave	= &omap3xxx_l4_wkup_hwmod,
-	.user	= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* L4 CORE -> MMC1 interface */
-static struct omap_hwmod_ocp_if omap3xxx_l4_core__mmc1 = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap3xxx_mmc1_hwmod,
-	.clk		= "mmchs1_ick",
-	.addr		= omap2430_mmc1_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-	.flags		= OMAP_FIREWALL_L4
-};
-
-/* L4 CORE -> MMC2 interface */
-static struct omap_hwmod_ocp_if omap3xxx_l4_core__mmc2 = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap3xxx_mmc2_hwmod,
-	.clk		= "mmchs2_ick",
-	.addr		= omap2430_mmc2_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-	.flags		= OMAP_FIREWALL_L4
-};
-
-/* L4 CORE -> MMC3 interface */
-static struct omap_hwmod_addr_space omap3xxx_mmc3_addr_space[] = {
-	{
-		.pa_start	= 0x480ad000,
-		.pa_end		= 0x480ad1ff,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if omap3xxx_l4_core__mmc3 = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap3xxx_mmc3_hwmod,
-	.clk		= "mmchs3_ick",
-	.addr		= omap3xxx_mmc3_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-	.flags		= OMAP_FIREWALL_L4
-};
-
-/* L4 CORE -> UART1 interface */
-static struct omap_hwmod_addr_space omap3xxx_uart1_addr_space[] = {
-	{
-		.pa_start	= OMAP3_UART1_BASE,
-		.pa_end		= OMAP3_UART1_BASE + SZ_8K - 1,
-		.flags		= ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if omap3_l4_core__uart1 = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap3xxx_uart1_hwmod,
-	.clk		= "uart1_ick",
-	.addr		= omap3xxx_uart1_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* L4 CORE -> UART2 interface */
-static struct omap_hwmod_addr_space omap3xxx_uart2_addr_space[] = {
-	{
-		.pa_start	= OMAP3_UART2_BASE,
-		.pa_end		= OMAP3_UART2_BASE + SZ_1K - 1,
-		.flags		= ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if omap3_l4_core__uart2 = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap3xxx_uart2_hwmod,
-	.clk		= "uart2_ick",
-	.addr		= omap3xxx_uart2_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* L4 PER -> UART3 interface */
-static struct omap_hwmod_addr_space omap3xxx_uart3_addr_space[] = {
-	{
-		.pa_start	= OMAP3_UART3_BASE,
-		.pa_end		= OMAP3_UART3_BASE + SZ_1K - 1,
-		.flags		= ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if omap3_l4_per__uart3 = {
-	.master		= &omap3xxx_l4_per_hwmod,
-	.slave		= &omap3xxx_uart3_hwmod,
-	.clk		= "uart3_ick",
-	.addr		= omap3xxx_uart3_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* L4 PER -> UART4 interface */
-static struct omap_hwmod_addr_space omap3xxx_uart4_addr_space[] = {
-	{
-		.pa_start	= OMAP3_UART4_BASE,
-		.pa_end		= OMAP3_UART4_BASE + SZ_1K - 1,
-		.flags		= ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if omap3_l4_per__uart4 = {
-	.master		= &omap3xxx_l4_per_hwmod,
-	.slave		= &omap3xxx_uart4_hwmod,
-	.clk		= "uart4_ick",
-	.addr		= omap3xxx_uart4_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* AM35xx: L4 CORE -> UART4 interface */
-static struct omap_hwmod_addr_space am35xx_uart4_addr_space[] = {
-	{
-		.pa_start       = OMAP3_UART4_AM35XX_BASE,
-		.pa_end         = OMAP3_UART4_AM35XX_BASE + SZ_1K - 1,
-		.flags          = ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
-	},
-};
-
-static struct omap_hwmod_ocp_if am35xx_l4_core__uart4 = {
-	.master         = &omap3xxx_l4_core_hwmod,
-	.slave          = &am35xx_uart4_hwmod,
-	.clk            = "uart4_ick",
-	.addr           = am35xx_uart4_addr_space,
-	.user           = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* L4 CORE -> I2C1 interface */
-static struct omap_hwmod_ocp_if omap3_l4_core__i2c1 = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap3xxx_i2c1_hwmod,
-	.clk		= "i2c1_ick",
-	.addr		= omap2_i2c1_addr_space,
-	.fw = {
-		.omap2 = {
-			.l4_fw_region  = OMAP3_L4_CORE_FW_I2C1_REGION,
-			.l4_prot_group = 7,
-			.flags	= OMAP_FIREWALL_L4,
-		}
-	},
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* L4 CORE -> I2C2 interface */
-static struct omap_hwmod_ocp_if omap3_l4_core__i2c2 = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap3xxx_i2c2_hwmod,
-	.clk		= "i2c2_ick",
-	.addr		= omap2_i2c2_addr_space,
-	.fw = {
-		.omap2 = {
-			.l4_fw_region  = OMAP3_L4_CORE_FW_I2C2_REGION,
-			.l4_prot_group = 7,
-			.flags = OMAP_FIREWALL_L4,
-		}
-	},
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* L4 CORE -> I2C3 interface */
-static struct omap_hwmod_addr_space omap3xxx_i2c3_addr_space[] = {
-	{
-		.pa_start	= 0x48060000,
-		.pa_end		= 0x48060000 + SZ_128 - 1,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if omap3_l4_core__i2c3 = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap3xxx_i2c3_hwmod,
-	.clk		= "i2c3_ick",
-	.addr		= omap3xxx_i2c3_addr_space,
-	.fw = {
-		.omap2 = {
-			.l4_fw_region  = OMAP3_L4_CORE_FW_I2C3_REGION,
-			.l4_prot_group = 7,
-			.flags = OMAP_FIREWALL_L4,
-		}
-	},
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_irq_info omap3_smartreflex_mpu_irqs[] = {
-	{ .irq = 18},
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_irq_info omap3_smartreflex_core_irqs[] = {
-	{ .irq = 19},
-	{ .irq = -1 }
-};
-
-/* L4 CORE -> SR1 interface */
-static struct omap_hwmod_addr_space omap3_sr1_addr_space[] = {
-	{
-		.pa_start	= OMAP34XX_SR1_BASE,
-		.pa_end		= OMAP34XX_SR1_BASE + SZ_1K - 1,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if omap3_l4_core__sr1 = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap34xx_sr1_hwmod,
-	.clk		= "sr_l4_ick",
-	.addr		= omap3_sr1_addr_space,
-	.user		= OCP_USER_MPU,
-};
-
-/* L4 CORE -> SR1 interface */
-static struct omap_hwmod_addr_space omap3_sr2_addr_space[] = {
-	{
-		.pa_start	= OMAP34XX_SR2_BASE,
-		.pa_end		= OMAP34XX_SR2_BASE + SZ_1K - 1,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if omap3_l4_core__sr2 = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap34xx_sr2_hwmod,
-	.clk		= "sr_l4_ick",
-	.addr		= omap3_sr2_addr_space,
-	.user		= OCP_USER_MPU,
-};
-
-/*
-* usbhsotg interface data
-*/
-
-static struct omap_hwmod_addr_space omap3xxx_usbhsotg_addrs[] = {
-	{
-		.pa_start	= OMAP34XX_HSUSB_OTG_BASE,
-		.pa_end		= OMAP34XX_HSUSB_OTG_BASE + SZ_4K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_core -> usbhsotg  */
-static struct omap_hwmod_ocp_if omap3xxx_l4_core__usbhsotg = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap3xxx_usbhsotg_hwmod,
-	.clk		= "l4_ick",
-	.addr		= omap3xxx_usbhsotg_addrs,
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if *omap3xxx_usbhsotg_masters[] = {
-	&omap3xxx_usbhsotg__l3,
-};
-
-static struct omap_hwmod_ocp_if *omap3xxx_usbhsotg_slaves[] = {
-	&omap3xxx_l4_core__usbhsotg,
-};
-
-static struct omap_hwmod_addr_space am35xx_usbhsotg_addrs[] = {
-	{
-		.pa_start	= AM35XX_IPSS_USBOTGSS_BASE,
-		.pa_end		= AM35XX_IPSS_USBOTGSS_BASE + SZ_4K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_core -> usbhsotg  */
-static struct omap_hwmod_ocp_if am35xx_l4_core__usbhsotg = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &am35xx_usbhsotg_hwmod,
-	.clk		= "l4_ick",
-	.addr		= am35xx_usbhsotg_addrs,
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if *am35xx_usbhsotg_masters[] = {
-	&am35xx_usbhsotg__l3,
-};
-
-static struct omap_hwmod_ocp_if *am35xx_usbhsotg_slaves[] = {
-	&am35xx_l4_core__usbhsotg,
-};
-/* Slave interfaces on the L4_CORE interconnect */
-static struct omap_hwmod_ocp_if *omap3xxx_l4_core_slaves[] = {
-	&omap3xxx_l3_main__l4_core,
-};
-
 /* L4 CORE */
 static struct omap_hwmod omap3xxx_l4_core_hwmod = {
 	.name		= "l4_core",
 	.class		= &l4_hwmod_class,
-	.slaves		= omap3xxx_l4_core_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_l4_core_slaves),
 	.flags		= HWMOD_NO_IDLEST,
 };
 
-/* Slave interfaces on the L4_PER interconnect */
-static struct omap_hwmod_ocp_if *omap3xxx_l4_per_slaves[] = {
-	&omap3xxx_l3_main__l4_per,
-};
-
 /* L4 PER */
 static struct omap_hwmod omap3xxx_l4_per_hwmod = {
 	.name		= "l4_per",
 	.class		= &l4_hwmod_class,
-	.slaves		= omap3xxx_l4_per_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_l4_per_slaves),
 	.flags		= HWMOD_NO_IDLEST,
 };
 
-/* Slave interfaces on the L4_WKUP interconnect */
-static struct omap_hwmod_ocp_if *omap3xxx_l4_wkup_slaves[] = {
-	&omap3xxx_l4_core__l4_wkup,
-};
-
 /* L4 WKUP */
 static struct omap_hwmod omap3xxx_l4_wkup_hwmod = {
 	.name		= "l4_wkup",
 	.class		= &l4_hwmod_class,
-	.slaves		= omap3xxx_l4_wkup_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_l4_wkup_slaves),
 	.flags		= HWMOD_NO_IDLEST,
 };
 
-/* Master interfaces on the MPU device */
-static struct omap_hwmod_ocp_if *omap3xxx_mpu_masters[] = {
-	&omap3xxx_mpu__l3_main,
+/* L4 SEC */
+static struct omap_hwmod omap3xxx_l4_sec_hwmod = {
+	.name		= "l4_sec",
+	.class		= &l4_hwmod_class,
+	.flags		= HWMOD_NO_IDLEST,
 };
 
 /* MPU */
@@ -530,35 +96,22 @@ static struct omap_hwmod omap3xxx_mpu_hwmod = {
 	.name		= "mpu",
 	.class		= &mpu_hwmod_class,
 	.main_clk	= "arm_fck",
-	.masters	= omap3xxx_mpu_masters,
-	.masters_cnt	= ARRAY_SIZE(omap3xxx_mpu_masters),
 };
 
-/*
- * IVA2_2 interface data
- */
-
-/* IVA2 <- L3 interface */
-static struct omap_hwmod_ocp_if omap3xxx_l3__iva = {
-	.master		= &omap3xxx_l3_main_hwmod,
-	.slave		= &omap3xxx_iva_hwmod,
-	.clk		= "iva2_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+/* IVA2 (IVA2) */
+static struct omap_hwmod_rst_info omap3xxx_iva_resets[] = {
+	{ .name = "logic", .rst_shift = 0 },
+	{ .name = "seq0", .rst_shift = 1 },
+	{ .name = "seq1", .rst_shift = 2 },
 };
 
-static struct omap_hwmod_ocp_if *omap3xxx_iva_masters[] = {
-	&omap3xxx_l3__iva,
-};
-
-/*
- * IVA2 (IVA2)
- */
-
 static struct omap_hwmod omap3xxx_iva_hwmod = {
 	.name		= "iva",
 	.class		= &iva_hwmod_class,
-	.masters	= omap3xxx_iva_masters,
-	.masters_cnt	= ARRAY_SIZE(omap3xxx_iva_masters),
+	.clkdm_name	= "iva2_clkdm",
+	.rst_lines	= omap3xxx_iva_resets,
+	.rst_lines_cnt	= ARRAY_SIZE(omap3xxx_iva_resets),
+	.main_clk	= "iva2_ck",
 };
 
 /* timer class */
@@ -597,46 +150,20 @@ static struct omap_hwmod_class omap3xxx_timer_hwmod_class = {
 
 /* secure timers dev attribute */
 static struct omap_timer_capability_dev_attr capability_secure_dev_attr = {
-	.timer_capability       = OMAP_TIMER_SECURE,
+	.timer_capability	= OMAP_TIMER_SECURE,
 };
 
 /* always-on timers dev attribute */
 static struct omap_timer_capability_dev_attr capability_alwon_dev_attr = {
-	.timer_capability       = OMAP_TIMER_ALWON,
+	.timer_capability	= OMAP_TIMER_ALWON,
 };
 
 /* pwm timers dev attribute */
 static struct omap_timer_capability_dev_attr capability_pwm_dev_attr = {
-	.timer_capability       = OMAP_TIMER_HAS_PWM,
+	.timer_capability	= OMAP_TIMER_HAS_PWM,
 };
 
 /* timer1 */
-static struct omap_hwmod omap3xxx_timer1_hwmod;
-
-static struct omap_hwmod_addr_space omap3xxx_timer1_addrs[] = {
-	{
-		.pa_start	= 0x48318000,
-		.pa_end		= 0x48318000 + SZ_1K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_wkup -> timer1 */
-static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__timer1 = {
-	.master		= &omap3xxx_l4_wkup_hwmod,
-	.slave		= &omap3xxx_timer1_hwmod,
-	.clk		= "gpt1_ick",
-	.addr		= omap3xxx_timer1_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer1 slave port */
-static struct omap_hwmod_ocp_if *omap3xxx_timer1_slaves[] = {
-	&omap3xxx_l4_wkup__timer1,
-};
-
-/* timer1 hwmod */
 static struct omap_hwmod omap3xxx_timer1_hwmod = {
 	.name		= "timer1",
 	.mpu_irqs	= omap2_timer1_mpu_irqs,
@@ -651,38 +178,10 @@ static struct omap_hwmod omap3xxx_timer1_hwmod = {
 		},
 	},
 	.dev_attr	= &capability_alwon_dev_attr,
-	.slaves		= omap3xxx_timer1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_timer1_slaves),
 	.class		= &omap3xxx_timer_1ms_hwmod_class,
 };
 
 /* timer2 */
-static struct omap_hwmod omap3xxx_timer2_hwmod;
-
-static struct omap_hwmod_addr_space omap3xxx_timer2_addrs[] = {
-	{
-		.pa_start	= 0x49032000,
-		.pa_end		= 0x49032000 + SZ_1K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> timer2 */
-static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer2 = {
-	.master		= &omap3xxx_l4_per_hwmod,
-	.slave		= &omap3xxx_timer2_hwmod,
-	.clk		= "gpt2_ick",
-	.addr		= omap3xxx_timer2_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer2 slave port */
-static struct omap_hwmod_ocp_if *omap3xxx_timer2_slaves[] = {
-	&omap3xxx_l4_per__timer2,
-};
-
-/* timer2 hwmod */
 static struct omap_hwmod omap3xxx_timer2_hwmod = {
 	.name		= "timer2",
 	.mpu_irqs	= omap2_timer2_mpu_irqs,
@@ -697,38 +196,10 @@ static struct omap_hwmod omap3xxx_timer2_hwmod = {
 		},
 	},
 	.dev_attr	= &capability_alwon_dev_attr,
-	.slaves		= omap3xxx_timer2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_timer2_slaves),
 	.class		= &omap3xxx_timer_1ms_hwmod_class,
 };
 
 /* timer3 */
-static struct omap_hwmod omap3xxx_timer3_hwmod;
-
-static struct omap_hwmod_addr_space omap3xxx_timer3_addrs[] = {
-	{
-		.pa_start	= 0x49034000,
-		.pa_end		= 0x49034000 + SZ_1K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> timer3 */
-static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer3 = {
-	.master		= &omap3xxx_l4_per_hwmod,
-	.slave		= &omap3xxx_timer3_hwmod,
-	.clk		= "gpt3_ick",
-	.addr		= omap3xxx_timer3_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer3 slave port */
-static struct omap_hwmod_ocp_if *omap3xxx_timer3_slaves[] = {
-	&omap3xxx_l4_per__timer3,
-};
-
-/* timer3 hwmod */
 static struct omap_hwmod omap3xxx_timer3_hwmod = {
 	.name		= "timer3",
 	.mpu_irqs	= omap2_timer3_mpu_irqs,
@@ -743,38 +214,10 @@ static struct omap_hwmod omap3xxx_timer3_hwmod = {
 		},
 	},
 	.dev_attr	= &capability_alwon_dev_attr,
-	.slaves		= omap3xxx_timer3_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_timer3_slaves),
 	.class		= &omap3xxx_timer_hwmod_class,
 };
 
 /* timer4 */
-static struct omap_hwmod omap3xxx_timer4_hwmod;
-
-static struct omap_hwmod_addr_space omap3xxx_timer4_addrs[] = {
-	{
-		.pa_start	= 0x49036000,
-		.pa_end		= 0x49036000 + SZ_1K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> timer4 */
-static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer4 = {
-	.master		= &omap3xxx_l4_per_hwmod,
-	.slave		= &omap3xxx_timer4_hwmod,
-	.clk		= "gpt4_ick",
-	.addr		= omap3xxx_timer4_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer4 slave port */
-static struct omap_hwmod_ocp_if *omap3xxx_timer4_slaves[] = {
-	&omap3xxx_l4_per__timer4,
-};
-
-/* timer4 hwmod */
 static struct omap_hwmod omap3xxx_timer4_hwmod = {
 	.name		= "timer4",
 	.mpu_irqs	= omap2_timer4_mpu_irqs,
@@ -789,38 +232,10 @@ static struct omap_hwmod omap3xxx_timer4_hwmod = {
 		},
 	},
 	.dev_attr	= &capability_alwon_dev_attr,
-	.slaves		= omap3xxx_timer4_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_timer4_slaves),
 	.class		= &omap3xxx_timer_hwmod_class,
 };
 
 /* timer5 */
-static struct omap_hwmod omap3xxx_timer5_hwmod;
-
-static struct omap_hwmod_addr_space omap3xxx_timer5_addrs[] = {
-	{
-		.pa_start	= 0x49038000,
-		.pa_end		= 0x49038000 + SZ_1K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> timer5 */
-static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer5 = {
-	.master		= &omap3xxx_l4_per_hwmod,
-	.slave		= &omap3xxx_timer5_hwmod,
-	.clk		= "gpt5_ick",
-	.addr		= omap3xxx_timer5_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer5 slave port */
-static struct omap_hwmod_ocp_if *omap3xxx_timer5_slaves[] = {
-	&omap3xxx_l4_per__timer5,
-};
-
-/* timer5 hwmod */
 static struct omap_hwmod omap3xxx_timer5_hwmod = {
 	.name		= "timer5",
 	.mpu_irqs	= omap2_timer5_mpu_irqs,
@@ -835,38 +250,10 @@ static struct omap_hwmod omap3xxx_timer5_hwmod = {
 		},
 	},
 	.dev_attr	= &capability_alwon_dev_attr,
-	.slaves		= omap3xxx_timer5_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_timer5_slaves),
 	.class		= &omap3xxx_timer_hwmod_class,
 };
 
 /* timer6 */
-static struct omap_hwmod omap3xxx_timer6_hwmod;
-
-static struct omap_hwmod_addr_space omap3xxx_timer6_addrs[] = {
-	{
-		.pa_start	= 0x4903A000,
-		.pa_end		= 0x4903A000 + SZ_1K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> timer6 */
-static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer6 = {
-	.master		= &omap3xxx_l4_per_hwmod,
-	.slave		= &omap3xxx_timer6_hwmod,
-	.clk		= "gpt6_ick",
-	.addr		= omap3xxx_timer6_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer6 slave port */
-static struct omap_hwmod_ocp_if *omap3xxx_timer6_slaves[] = {
-	&omap3xxx_l4_per__timer6,
-};
-
-/* timer6 hwmod */
 static struct omap_hwmod omap3xxx_timer6_hwmod = {
 	.name		= "timer6",
 	.mpu_irqs	= omap2_timer6_mpu_irqs,
@@ -881,38 +268,10 @@ static struct omap_hwmod omap3xxx_timer6_hwmod = {
 		},
 	},
 	.dev_attr	= &capability_alwon_dev_attr,
-	.slaves		= omap3xxx_timer6_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_timer6_slaves),
 	.class		= &omap3xxx_timer_hwmod_class,
 };
 
 /* timer7 */
-static struct omap_hwmod omap3xxx_timer7_hwmod;
-
-static struct omap_hwmod_addr_space omap3xxx_timer7_addrs[] = {
-	{
-		.pa_start	= 0x4903C000,
-		.pa_end		= 0x4903C000 + SZ_1K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> timer7 */
-static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer7 = {
-	.master		= &omap3xxx_l4_per_hwmod,
-	.slave		= &omap3xxx_timer7_hwmod,
-	.clk		= "gpt7_ick",
-	.addr		= omap3xxx_timer7_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer7 slave port */
-static struct omap_hwmod_ocp_if *omap3xxx_timer7_slaves[] = {
-	&omap3xxx_l4_per__timer7,
-};
-
-/* timer7 hwmod */
 static struct omap_hwmod omap3xxx_timer7_hwmod = {
 	.name		= "timer7",
 	.mpu_irqs	= omap2_timer7_mpu_irqs,
@@ -927,38 +286,10 @@ static struct omap_hwmod omap3xxx_timer7_hwmod = {
 		},
 	},
 	.dev_attr	= &capability_alwon_dev_attr,
-	.slaves		= omap3xxx_timer7_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_timer7_slaves),
 	.class		= &omap3xxx_timer_hwmod_class,
 };
 
 /* timer8 */
-static struct omap_hwmod omap3xxx_timer8_hwmod;
-
-static struct omap_hwmod_addr_space omap3xxx_timer8_addrs[] = {
-	{
-		.pa_start	= 0x4903E000,
-		.pa_end		= 0x4903E000 + SZ_1K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> timer8 */
-static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer8 = {
-	.master		= &omap3xxx_l4_per_hwmod,
-	.slave		= &omap3xxx_timer8_hwmod,
-	.clk		= "gpt8_ick",
-	.addr		= omap3xxx_timer8_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer8 slave port */
-static struct omap_hwmod_ocp_if *omap3xxx_timer8_slaves[] = {
-	&omap3xxx_l4_per__timer8,
-};
-
-/* timer8 hwmod */
 static struct omap_hwmod omap3xxx_timer8_hwmod = {
 	.name		= "timer8",
 	.mpu_irqs	= omap2_timer8_mpu_irqs,
@@ -973,38 +304,10 @@ static struct omap_hwmod omap3xxx_timer8_hwmod = {
 		},
 	},
 	.dev_attr	= &capability_pwm_dev_attr,
-	.slaves		= omap3xxx_timer8_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_timer8_slaves),
 	.class		= &omap3xxx_timer_hwmod_class,
 };
 
 /* timer9 */
-static struct omap_hwmod omap3xxx_timer9_hwmod;
-
-static struct omap_hwmod_addr_space omap3xxx_timer9_addrs[] = {
-	{
-		.pa_start	= 0x49040000,
-		.pa_end		= 0x49040000 + SZ_1K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> timer9 */
-static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer9 = {
-	.master		= &omap3xxx_l4_per_hwmod,
-	.slave		= &omap3xxx_timer9_hwmod,
-	.clk		= "gpt9_ick",
-	.addr		= omap3xxx_timer9_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer9 slave port */
-static struct omap_hwmod_ocp_if *omap3xxx_timer9_slaves[] = {
-	&omap3xxx_l4_per__timer9,
-};
-
-/* timer9 hwmod */
 static struct omap_hwmod omap3xxx_timer9_hwmod = {
 	.name		= "timer9",
 	.mpu_irqs	= omap2_timer9_mpu_irqs,
@@ -1019,29 +322,10 @@ static struct omap_hwmod omap3xxx_timer9_hwmod = {
 		},
 	},
 	.dev_attr	= &capability_pwm_dev_attr,
-	.slaves		= omap3xxx_timer9_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_timer9_slaves),
 	.class		= &omap3xxx_timer_hwmod_class,
 };
 
 /* timer10 */
-static struct omap_hwmod omap3xxx_timer10_hwmod;
-
-/* l4_core -> timer10 */
-static struct omap_hwmod_ocp_if omap3xxx_l4_core__timer10 = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap3xxx_timer10_hwmod,
-	.clk		= "gpt10_ick",
-	.addr		= omap2_timer10_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer10 slave port */
-static struct omap_hwmod_ocp_if *omap3xxx_timer10_slaves[] = {
-	&omap3xxx_l4_core__timer10,
-};
-
-/* timer10 hwmod */
 static struct omap_hwmod omap3xxx_timer10_hwmod = {
 	.name		= "timer10",
 	.mpu_irqs	= omap2_timer10_mpu_irqs,
@@ -1056,29 +340,10 @@ static struct omap_hwmod omap3xxx_timer10_hwmod = {
 		},
 	},
 	.dev_attr	= &capability_pwm_dev_attr,
-	.slaves		= omap3xxx_timer10_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_timer10_slaves),
 	.class		= &omap3xxx_timer_1ms_hwmod_class,
 };
 
 /* timer11 */
-static struct omap_hwmod omap3xxx_timer11_hwmod;
-
-/* l4_core -> timer11 */
-static struct omap_hwmod_ocp_if omap3xxx_l4_core__timer11 = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap3xxx_timer11_hwmod,
-	.clk		= "gpt11_ick",
-	.addr		= omap2_timer11_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer11 slave port */
-static struct omap_hwmod_ocp_if *omap3xxx_timer11_slaves[] = {
-	&omap3xxx_l4_core__timer11,
-};
-
-/* timer11 hwmod */
 static struct omap_hwmod omap3xxx_timer11_hwmod = {
 	.name		= "timer11",
 	.mpu_irqs	= omap2_timer11_mpu_irqs,
@@ -1093,42 +358,15 @@ static struct omap_hwmod omap3xxx_timer11_hwmod = {
 		},
 	},
 	.dev_attr	= &capability_pwm_dev_attr,
-	.slaves		= omap3xxx_timer11_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_timer11_slaves),
 	.class		= &omap3xxx_timer_hwmod_class,
 };
 
-/* timer12*/
-static struct omap_hwmod omap3xxx_timer12_hwmod;
+/* timer12 */
 static struct omap_hwmod_irq_info omap3xxx_timer12_mpu_irqs[] = {
 	{ .irq = 95, },
 	{ .irq = -1 }
 };
 
-static struct omap_hwmod_addr_space omap3xxx_timer12_addrs[] = {
-	{
-		.pa_start	= 0x48304000,
-		.pa_end		= 0x48304000 + SZ_1K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_core -> timer12 */
-static struct omap_hwmod_ocp_if omap3xxx_l4_core__timer12 = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap3xxx_timer12_hwmod,
-	.clk		= "gpt12_ick",
-	.addr		= omap3xxx_timer12_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer12 slave port */
-static struct omap_hwmod_ocp_if *omap3xxx_timer12_slaves[] = {
-	&omap3xxx_l4_core__timer12,
-};
-
-/* timer12 hwmod */
 static struct omap_hwmod omap3xxx_timer12_hwmod = {
 	.name		= "timer12",
 	.mpu_irqs	= omap3xxx_timer12_mpu_irqs,
@@ -1143,29 +381,9 @@ static struct omap_hwmod omap3xxx_timer12_hwmod = {
 		},
 	},
 	.dev_attr	= &capability_secure_dev_attr,
-	.slaves		= omap3xxx_timer12_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_timer12_slaves),
 	.class		= &omap3xxx_timer_hwmod_class,
 };
 
-/* l4_wkup -> wd_timer2 */
-static struct omap_hwmod_addr_space omap3xxx_wd_timer2_addrs[] = {
-	{
-		.pa_start	= 0x48314000,
-		.pa_end		= 0x4831407f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__wd_timer2 = {
-	.master		= &omap3xxx_l4_wkup_hwmod,
-	.slave		= &omap3xxx_wd_timer2_hwmod,
-	.clk		= "wdt2_ick",
-	.addr		= omap3xxx_wd_timer2_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /*
  * 'wd_timer' class
  * 32-bit watchdog upward counter that generates a pulse on the reset pin on
@@ -1200,12 +418,8 @@ static struct omap_hwmod_class_sysconfig i2c_sysc = {
 static struct omap_hwmod_class omap3xxx_wd_timer_hwmod_class = {
 	.name		= "wd_timer",
 	.sysc		= &omap3xxx_wd_timer_sysc,
-	.pre_shutdown	= &omap2_wd_timer_disable
-};
-
-/* wd_timer2 */
-static struct omap_hwmod_ocp_if *omap3xxx_wd_timer2_slaves[] = {
-	&omap3xxx_l4_wkup__wd_timer2,
+	.pre_shutdown	= &omap2_wd_timer_disable,
+	.reset		= &omap2_wd_timer_reset,
 };
 
 static struct omap_hwmod omap3xxx_wd_timer2_hwmod = {
@@ -1221,8 +435,6 @@ static struct omap_hwmod omap3xxx_wd_timer2_hwmod = {
 			.idlest_idle_bit = OMAP3430_ST_WDT2_SHIFT,
 		},
 	},
-	.slaves		= omap3xxx_wd_timer2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_wd_timer2_slaves),
 	/*
 	 * XXX: Use software supervised mode, HW supervised smartidle seems to
 	 * block CORE power domain idle transitions. Maybe a HW bug in wdt2?
@@ -1231,11 +443,6 @@ static struct omap_hwmod omap3xxx_wd_timer2_hwmod = {
 };
 
 /* UART1 */
-
-static struct omap_hwmod_ocp_if *omap3xxx_uart1_slaves[] = {
-	&omap3_l4_core__uart1,
-};
-
 static struct omap_hwmod omap3xxx_uart1_hwmod = {
 	.name		= "uart1",
 	.mpu_irqs	= omap2_uart1_mpu_irqs,
@@ -1250,17 +457,10 @@ static struct omap_hwmod omap3xxx_uart1_hwmod = {
 			.idlest_idle_bit = OMAP3430_EN_UART1_SHIFT,
 		},
 	},
-	.slaves		= omap3xxx_uart1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_uart1_slaves),
 	.class		= &omap2_uart_class,
 };
 
 /* UART2 */
-
-static struct omap_hwmod_ocp_if *omap3xxx_uart2_slaves[] = {
-	&omap3_l4_core__uart2,
-};
-
 static struct omap_hwmod omap3xxx_uart2_hwmod = {
 	.name		= "uart2",
 	.mpu_irqs	= omap2_uart2_mpu_irqs,
@@ -1275,17 +475,10 @@ static struct omap_hwmod omap3xxx_uart2_hwmod = {
 			.idlest_idle_bit = OMAP3430_EN_UART2_SHIFT,
 		},
 	},
-	.slaves		= omap3xxx_uart2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_uart2_slaves),
 	.class		= &omap2_uart_class,
 };
 
 /* UART3 */
-
-static struct omap_hwmod_ocp_if *omap3xxx_uart3_slaves[] = {
-	&omap3_l4_per__uart3,
-};
-
 static struct omap_hwmod omap3xxx_uart3_hwmod = {
 	.name		= "uart3",
 	.mpu_irqs	= omap2_uart3_mpu_irqs,
@@ -1300,13 +493,10 @@ static struct omap_hwmod omap3xxx_uart3_hwmod = {
 			.idlest_idle_bit = OMAP3430_EN_UART3_SHIFT,
 		},
 	},
-	.slaves		= omap3xxx_uart3_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_uart3_slaves),
 	.class		= &omap2_uart_class,
 };
 
 /* UART4 */
-
 static struct omap_hwmod_irq_info uart4_mpu_irqs[] = {
 	{ .irq = INT_36XX_UART4_IRQ, },
 	{ .irq = -1 }
@@ -1318,11 +508,7 @@ static struct omap_hwmod_dma_info uart4_sdma_reqs[] = {
 	{ .dma_req = -1 }
 };
 
-static struct omap_hwmod_ocp_if *omap3xxx_uart4_slaves[] = {
-	&omap3_l4_per__uart4,
-};
-
-static struct omap_hwmod omap3xxx_uart4_hwmod = {
+static struct omap_hwmod omap36xx_uart4_hwmod = {
 	.name		= "uart4",
 	.mpu_irqs	= uart4_mpu_irqs,
 	.sdma_reqs	= uart4_sdma_reqs,
@@ -1336,8 +522,6 @@ static struct omap_hwmod omap3xxx_uart4_hwmod = {
 			.idlest_idle_bit = OMAP3630_EN_UART4_SHIFT,
 		},
 	},
-	.slaves		= omap3xxx_uart4_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_uart4_slaves),
 	.class		= &omap2_uart_class,
 };
 
@@ -1350,16 +534,12 @@ static struct omap_hwmod_dma_info am35xx_uart4_sdma_reqs[] = {
 	{ .name = "tx", .dma_req = AM35XX_DMA_UART4_TX, },
 };
 
-static struct omap_hwmod_ocp_if *am35xx_uart4_slaves[] = {
-	&am35xx_l4_core__uart4,
-};
-
 static struct omap_hwmod am35xx_uart4_hwmod = {
-	.name           = "uart4",
-	.mpu_irqs       = am35xx_uart4_mpu_irqs,
-	.sdma_reqs      = am35xx_uart4_sdma_reqs,
-	.main_clk       = "uart4_fck",
-	.prcm           = {
+	.name		= "uart4",
+	.mpu_irqs	= am35xx_uart4_mpu_irqs,
+	.sdma_reqs	= am35xx_uart4_sdma_reqs,
+	.main_clk	= "uart4_fck",
+	.prcm		= {
 		.omap2 = {
 			.module_offs = CORE_MOD,
 			.prcm_reg_id = 1,
@@ -1368,12 +548,9 @@ static struct omap_hwmod am35xx_uart4_hwmod = {
 			.idlest_idle_bit = OMAP3430_EN_UART4_SHIFT,
 		},
 	},
-	.slaves         = am35xx_uart4_slaves,
-	.slaves_cnt     = ARRAY_SIZE(am35xx_uart4_slaves),
-	.class          = &omap2_uart_class,
+	.class		= &omap2_uart_class,
 };
 
-
 static struct omap_hwmod_class i2c_class = {
 	.name	= "i2c",
 	.sysc	= &i2c_sysc,
@@ -1388,51 +565,6 @@ static struct omap_hwmod_dma_info omap3xxx_dss_sdma_chs[] = {
 };
 
 /* dss */
-/* dss master ports */
-static struct omap_hwmod_ocp_if *omap3xxx_dss_masters[] = {
-	&omap3xxx_dss__l3,
-};
-
-/* l4_core -> dss */
-static struct omap_hwmod_ocp_if omap3430es1_l4_core__dss = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap3430es1_dss_core_hwmod,
-	.clk		= "dss_ick",
-	.addr		= omap2_dss_addrs,
-	.fw = {
-		.omap2 = {
-			.l4_fw_region  = OMAP3ES1_L4_CORE_FW_DSS_CORE_REGION,
-			.l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP,
-			.flags	= OMAP_FIREWALL_L4,
-		}
-	},
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap3xxx_dss_core_hwmod,
-	.clk		= "dss_ick",
-	.addr		= omap2_dss_addrs,
-	.fw = {
-		.omap2 = {
-			.l4_fw_region  = OMAP3_L4_CORE_FW_DSS_CORE_REGION,
-			.l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP,
-			.flags	= OMAP_FIREWALL_L4,
-		}
-	},
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* dss slave ports */
-static struct omap_hwmod_ocp_if *omap3430es1_dss_slaves[] = {
-	&omap3430es1_l4_core__dss,
-};
-
-static struct omap_hwmod_ocp_if *omap3xxx_dss_slaves[] = {
-	&omap3xxx_l4_core__dss,
-};
-
 static struct omap_hwmod_opt_clk dss_opt_clks[] = {
 	/*
 	 * The DSS HW needs all DSS clocks enabled during reset. The dss_core
@@ -1460,10 +592,6 @@ static struct omap_hwmod omap3430es1_dss_core_hwmod = {
 	},
 	.opt_clks	= dss_opt_clks,
 	.opt_clks_cnt = ARRAY_SIZE(dss_opt_clks),
-	.slaves		= omap3430es1_dss_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3430es1_dss_slaves),
-	.masters	= omap3xxx_dss_masters,
-	.masters_cnt	= ARRAY_SIZE(omap3xxx_dss_masters),
 	.flags		= HWMOD_NO_IDLEST | HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 };
 
@@ -1485,10 +613,6 @@ static struct omap_hwmod omap3xxx_dss_core_hwmod = {
 	},
 	.opt_clks	= dss_opt_clks,
 	.opt_clks_cnt = ARRAY_SIZE(dss_opt_clks),
-	.slaves		= omap3xxx_dss_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_dss_slaves),
-	.masters	= omap3xxx_dss_masters,
-	.masters_cnt	= ARRAY_SIZE(omap3xxx_dss_masters),
 };
 
 /*
@@ -1513,27 +637,6 @@ static struct omap_hwmod_class omap3_dispc_hwmod_class = {
 	.sysc	= &omap3_dispc_sysc,
 };
 
-/* l4_core -> dss_dispc */
-static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_dispc = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap3xxx_dss_dispc_hwmod,
-	.clk		= "dss_ick",
-	.addr		= omap2_dss_dispc_addrs,
-	.fw = {
-		.omap2 = {
-			.l4_fw_region  = OMAP3_L4_CORE_FW_DSS_DISPC_REGION,
-			.l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP,
-			.flags	= OMAP_FIREWALL_L4,
-		}
-	},
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* dss_dispc slave ports */
-static struct omap_hwmod_ocp_if *omap3xxx_dss_dispc_slaves[] = {
-	&omap3xxx_l4_core__dss_dispc,
-};
-
 static struct omap_hwmod omap3xxx_dss_dispc_hwmod = {
 	.name		= "dss_dispc",
 	.class		= &omap3_dispc_hwmod_class,
@@ -1546,8 +649,6 @@ static struct omap_hwmod omap3xxx_dss_dispc_hwmod = {
 			.module_offs = OMAP3430_DSS_MOD,
 		},
 	},
-	.slaves		= omap3xxx_dss_dispc_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_dss_dispc_slaves),
 	.flags		= HWMOD_NO_IDLEST,
 	.dev_attr	= &omap2_3_dss_dispc_dev_attr
 };
@@ -1567,36 +668,6 @@ static struct omap_hwmod_irq_info omap3xxx_dsi1_irqs[] = {
 };
 
 /* dss_dsi1 */
-static struct omap_hwmod_addr_space omap3xxx_dss_dsi1_addrs[] = {
-	{
-		.pa_start	= 0x4804FC00,
-		.pa_end		= 0x4804FFFF,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_core -> dss_dsi1 */
-static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_dsi1 = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap3xxx_dss_dsi1_hwmod,
-	.clk		= "dss_ick",
-	.addr		= omap3xxx_dss_dsi1_addrs,
-	.fw = {
-		.omap2 = {
-			.l4_fw_region  = OMAP3_L4_CORE_FW_DSS_DSI_REGION,
-			.l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP,
-			.flags	= OMAP_FIREWALL_L4,
-		}
-	},
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* dss_dsi1 slave ports */
-static struct omap_hwmod_ocp_if *omap3xxx_dss_dsi1_slaves[] = {
-	&omap3xxx_l4_core__dss_dsi1,
-};
-
 static struct omap_hwmod_opt_clk dss_dsi1_opt_clks[] = {
 	{ .role = "sys_clk", .clk = "dss2_alwon_fck" },
 };
@@ -1615,32 +686,9 @@ static struct omap_hwmod omap3xxx_dss_dsi1_hwmod = {
 	},
 	.opt_clks	= dss_dsi1_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(dss_dsi1_opt_clks),
-	.slaves		= omap3xxx_dss_dsi1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_dss_dsi1_slaves),
 	.flags		= HWMOD_NO_IDLEST,
 };
 
-/* l4_core -> dss_rfbi */
-static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_rfbi = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap3xxx_dss_rfbi_hwmod,
-	.clk		= "dss_ick",
-	.addr		= omap2_dss_rfbi_addrs,
-	.fw = {
-		.omap2 = {
-			.l4_fw_region  = OMAP3_L4_CORE_FW_DSS_RFBI_REGION,
-			.l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP ,
-			.flags	= OMAP_FIREWALL_L4,
-		}
-	},
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* dss_rfbi slave ports */
-static struct omap_hwmod_ocp_if *omap3xxx_dss_rfbi_slaves[] = {
-	&omap3xxx_l4_core__dss_rfbi,
-};
-
 static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = {
 	{ .role = "ick", .clk = "dss_ick" },
 };
@@ -1658,33 +706,9 @@ static struct omap_hwmod omap3xxx_dss_rfbi_hwmod = {
 	},
 	.opt_clks	= dss_rfbi_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(dss_rfbi_opt_clks),
-	.slaves		= omap3xxx_dss_rfbi_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_dss_rfbi_slaves),
 	.flags		= HWMOD_NO_IDLEST,
 };
 
-/* l4_core -> dss_venc */
-static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_venc = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap3xxx_dss_venc_hwmod,
-	.clk		= "dss_ick",
-	.addr		= omap2_dss_venc_addrs,
-	.fw = {
-		.omap2 = {
-			.l4_fw_region  = OMAP3_L4_CORE_FW_DSS_VENC_REGION,
-			.l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP,
-			.flags	= OMAP_FIREWALL_L4,
-		}
-	},
-	.flags		= OCPIF_SWSUP_IDLE,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* dss_venc slave ports */
-static struct omap_hwmod_ocp_if *omap3xxx_dss_venc_slaves[] = {
-	&omap3xxx_l4_core__dss_venc,
-};
-
 static struct omap_hwmod_opt_clk dss_venc_opt_clks[] = {
 	/* required only on OMAP3430 */
 	{ .role = "tv_dac_clk", .clk = "dss_96m_fck" },
@@ -1703,13 +727,10 @@ static struct omap_hwmod omap3xxx_dss_venc_hwmod = {
 	},
 	.opt_clks	= dss_venc_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(dss_venc_opt_clks),
-	.slaves		= omap3xxx_dss_venc_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_dss_venc_slaves),
 	.flags		= HWMOD_NO_IDLEST,
 };
 
 /* I2C1 */
-
 static struct omap_i2c_dev_attr i2c1_dev_attr = {
 	.fifo_depth	= 8, /* bytes */
 	.flags		= OMAP_I2C_FLAG_APPLY_ERRATA_I207 |
@@ -1717,10 +738,6 @@ static struct omap_i2c_dev_attr i2c1_dev_attr = {
 			  OMAP_I2C_FLAG_BUS_SHIFT_2,
 };
 
-static struct omap_hwmod_ocp_if *omap3xxx_i2c1_slaves[] = {
-	&omap3_l4_core__i2c1,
-};
-
 static struct omap_hwmod omap3xxx_i2c1_hwmod = {
 	.name		= "i2c1",
 	.flags		= HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
@@ -1736,14 +753,11 @@ static struct omap_hwmod omap3xxx_i2c1_hwmod = {
 			.idlest_idle_bit = OMAP3430_ST_I2C1_SHIFT,
 		},
 	},
-	.slaves		= omap3xxx_i2c1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_i2c1_slaves),
 	.class		= &i2c_class,
 	.dev_attr	= &i2c1_dev_attr,
 };
 
 /* I2C2 */
-
 static struct omap_i2c_dev_attr i2c2_dev_attr = {
 	.fifo_depth	= 8, /* bytes */
 	.flags = OMAP_I2C_FLAG_APPLY_ERRATA_I207 |
@@ -1751,10 +765,6 @@ static struct omap_i2c_dev_attr i2c2_dev_attr = {
 		 OMAP_I2C_FLAG_BUS_SHIFT_2,
 };
 
-static struct omap_hwmod_ocp_if *omap3xxx_i2c2_slaves[] = {
-	&omap3_l4_core__i2c2,
-};
-
 static struct omap_hwmod omap3xxx_i2c2_hwmod = {
 	.name		= "i2c2",
 	.flags		= HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
@@ -1770,14 +780,11 @@ static struct omap_hwmod omap3xxx_i2c2_hwmod = {
 			.idlest_idle_bit = OMAP3430_ST_I2C2_SHIFT,
 		},
 	},
-	.slaves		= omap3xxx_i2c2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_i2c2_slaves),
 	.class		= &i2c_class,
 	.dev_attr	= &i2c2_dev_attr,
 };
 
 /* I2C3 */
-
 static struct omap_i2c_dev_attr i2c3_dev_attr = {
 	.fifo_depth	= 64, /* bytes */
 	.flags = OMAP_I2C_FLAG_APPLY_ERRATA_I207 |
@@ -1796,10 +803,6 @@ static struct omap_hwmod_dma_info i2c3_sdma_reqs[] = {
 	{ .dma_req = -1 }
 };
 
-static struct omap_hwmod_ocp_if *omap3xxx_i2c3_slaves[] = {
-	&omap3_l4_core__i2c3,
-};
-
 static struct omap_hwmod omap3xxx_i2c3_hwmod = {
 	.name		= "i2c3",
 	.flags		= HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
@@ -1815,114 +818,10 @@ static struct omap_hwmod omap3xxx_i2c3_hwmod = {
 			.idlest_idle_bit = OMAP3430_ST_I2C3_SHIFT,
 		},
 	},
-	.slaves		= omap3xxx_i2c3_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_i2c3_slaves),
 	.class		= &i2c_class,
 	.dev_attr	= &i2c3_dev_attr,
 };
 
-/* l4_wkup -> gpio1 */
-static struct omap_hwmod_addr_space omap3xxx_gpio1_addrs[] = {
-	{
-		.pa_start	= 0x48310000,
-		.pa_end		= 0x483101ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__gpio1 = {
-	.master		= &omap3xxx_l4_wkup_hwmod,
-	.slave		= &omap3xxx_gpio1_hwmod,
-	.addr		= omap3xxx_gpio1_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per -> gpio2 */
-static struct omap_hwmod_addr_space omap3xxx_gpio2_addrs[] = {
-	{
-		.pa_start	= 0x49050000,
-		.pa_end		= 0x490501ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio2 = {
-	.master		= &omap3xxx_l4_per_hwmod,
-	.slave		= &omap3xxx_gpio2_hwmod,
-	.addr		= omap3xxx_gpio2_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per -> gpio3 */
-static struct omap_hwmod_addr_space omap3xxx_gpio3_addrs[] = {
-	{
-		.pa_start	= 0x49052000,
-		.pa_end		= 0x490521ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio3 = {
-	.master		= &omap3xxx_l4_per_hwmod,
-	.slave		= &omap3xxx_gpio3_hwmod,
-	.addr		= omap3xxx_gpio3_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per -> gpio4 */
-static struct omap_hwmod_addr_space omap3xxx_gpio4_addrs[] = {
-	{
-		.pa_start	= 0x49054000,
-		.pa_end		= 0x490541ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio4 = {
-	.master		= &omap3xxx_l4_per_hwmod,
-	.slave		= &omap3xxx_gpio4_hwmod,
-	.addr		= omap3xxx_gpio4_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per -> gpio5 */
-static struct omap_hwmod_addr_space omap3xxx_gpio5_addrs[] = {
-	{
-		.pa_start	= 0x49056000,
-		.pa_end		= 0x490561ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio5 = {
-	.master		= &omap3xxx_l4_per_hwmod,
-	.slave		= &omap3xxx_gpio5_hwmod,
-	.addr		= omap3xxx_gpio5_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per -> gpio6 */
-static struct omap_hwmod_addr_space omap3xxx_gpio6_addrs[] = {
-	{
-		.pa_start	= 0x49058000,
-		.pa_end		= 0x490581ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio6 = {
-	.master		= &omap3xxx_l4_per_hwmod,
-	.slave		= &omap3xxx_gpio6_hwmod,
-	.addr		= omap3xxx_gpio6_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /*
  * 'gpio' class
  * general purpose io module
@@ -1945,7 +844,7 @@ static struct omap_hwmod_class omap3xxx_gpio_hwmod_class = {
 	.rev = 1,
 };
 
-/* gpio_dev_attr*/
+/* gpio_dev_attr */
 static struct omap_gpio_dev_attr gpio_dev_attr = {
 	.bank_width = 32,
 	.dbck_flag = true,
@@ -1956,10 +855,6 @@ static struct omap_hwmod_opt_clk gpio1_opt_clks[] = {
 	{ .role = "dbclk", .clk = "gpio1_dbck", },
 };
 
-static struct omap_hwmod_ocp_if *omap3xxx_gpio1_slaves[] = {
-	&omap3xxx_l4_wkup__gpio1,
-};
-
 static struct omap_hwmod omap3xxx_gpio1_hwmod = {
 	.name		= "gpio1",
 	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
@@ -1976,8 +871,6 @@ static struct omap_hwmod omap3xxx_gpio1_hwmod = {
 			.idlest_idle_bit = OMAP3430_ST_GPIO1_SHIFT,
 		},
 	},
-	.slaves		= omap3xxx_gpio1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_gpio1_slaves),
 	.class		= &omap3xxx_gpio_hwmod_class,
 	.dev_attr	= &gpio_dev_attr,
 };
@@ -1987,10 +880,6 @@ static struct omap_hwmod_opt_clk gpio2_opt_clks[] = {
 	{ .role = "dbclk", .clk = "gpio2_dbck", },
 };
 
-static struct omap_hwmod_ocp_if *omap3xxx_gpio2_slaves[] = {
-	&omap3xxx_l4_per__gpio2,
-};
-
 static struct omap_hwmod omap3xxx_gpio2_hwmod = {
 	.name		= "gpio2",
 	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
@@ -2007,8 +896,6 @@ static struct omap_hwmod omap3xxx_gpio2_hwmod = {
 			.idlest_idle_bit = OMAP3430_ST_GPIO2_SHIFT,
 		},
 	},
-	.slaves		= omap3xxx_gpio2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_gpio2_slaves),
 	.class		= &omap3xxx_gpio_hwmod_class,
 	.dev_attr	= &gpio_dev_attr,
 };
@@ -2018,10 +905,6 @@ static struct omap_hwmod_opt_clk gpio3_opt_clks[] = {
 	{ .role = "dbclk", .clk = "gpio3_dbck", },
 };
 
-static struct omap_hwmod_ocp_if *omap3xxx_gpio3_slaves[] = {
-	&omap3xxx_l4_per__gpio3,
-};
-
 static struct omap_hwmod omap3xxx_gpio3_hwmod = {
 	.name		= "gpio3",
 	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
@@ -2038,8 +921,6 @@ static struct omap_hwmod omap3xxx_gpio3_hwmod = {
 			.idlest_idle_bit = OMAP3430_ST_GPIO3_SHIFT,
 		},
 	},
-	.slaves		= omap3xxx_gpio3_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_gpio3_slaves),
 	.class		= &omap3xxx_gpio_hwmod_class,
 	.dev_attr	= &gpio_dev_attr,
 };
@@ -2049,10 +930,6 @@ static struct omap_hwmod_opt_clk gpio4_opt_clks[] = {
 	{ .role = "dbclk", .clk = "gpio4_dbck", },
 };
 
-static struct omap_hwmod_ocp_if *omap3xxx_gpio4_slaves[] = {
-	&omap3xxx_l4_per__gpio4,
-};
-
 static struct omap_hwmod omap3xxx_gpio4_hwmod = {
 	.name		= "gpio4",
 	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
@@ -2069,8 +946,6 @@ static struct omap_hwmod omap3xxx_gpio4_hwmod = {
 			.idlest_idle_bit = OMAP3430_ST_GPIO4_SHIFT,
 		},
 	},
-	.slaves		= omap3xxx_gpio4_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_gpio4_slaves),
 	.class		= &omap3xxx_gpio_hwmod_class,
 	.dev_attr	= &gpio_dev_attr,
 };
@@ -2085,10 +960,6 @@ static struct omap_hwmod_opt_clk gpio5_opt_clks[] = {
 	{ .role = "dbclk", .clk = "gpio5_dbck", },
 };
 
-static struct omap_hwmod_ocp_if *omap3xxx_gpio5_slaves[] = {
-	&omap3xxx_l4_per__gpio5,
-};
-
 static struct omap_hwmod omap3xxx_gpio5_hwmod = {
 	.name		= "gpio5",
 	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
@@ -2105,8 +976,6 @@ static struct omap_hwmod omap3xxx_gpio5_hwmod = {
 			.idlest_idle_bit = OMAP3430_ST_GPIO5_SHIFT,
 		},
 	},
-	.slaves		= omap3xxx_gpio5_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_gpio5_slaves),
 	.class		= &omap3xxx_gpio_hwmod_class,
 	.dev_attr	= &gpio_dev_attr,
 };
@@ -2121,10 +990,6 @@ static struct omap_hwmod_opt_clk gpio6_opt_clks[] = {
 	{ .role = "dbclk", .clk = "gpio6_dbck", },
 };
 
-static struct omap_hwmod_ocp_if *omap3xxx_gpio6_slaves[] = {
-	&omap3xxx_l4_per__gpio6,
-};
-
 static struct omap_hwmod omap3xxx_gpio6_hwmod = {
 	.name		= "gpio6",
 	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
@@ -2141,20 +1006,10 @@ static struct omap_hwmod omap3xxx_gpio6_hwmod = {
 			.idlest_idle_bit = OMAP3430_ST_GPIO6_SHIFT,
 		},
 	},
-	.slaves		= omap3xxx_gpio6_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_gpio6_slaves),
 	.class		= &omap3xxx_gpio_hwmod_class,
 	.dev_attr	= &gpio_dev_attr,
 };
 
-/* dma_system -> L3 */
-static struct omap_hwmod_ocp_if omap3xxx_dma_system__l3 = {
-	.master		= &omap3xxx_dma_system_hwmod,
-	.slave		= &omap3xxx_l3_main_hwmod,
-	.clk		= "core_l3_ick",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* dma attributes */
 static struct omap_dma_dev_attr dma_dev_attr = {
 	.dev_caps  = RESERVE_CHANNEL | DMA_LINKED_LCH | GLOBAL_PRIORITY |
@@ -2181,34 +1036,6 @@ static struct omap_hwmod_class omap3xxx_dma_hwmod_class = {
 };
 
 /* dma_system */
-static struct omap_hwmod_addr_space omap3xxx_dma_system_addrs[] = {
-	{
-		.pa_start	= 0x48056000,
-		.pa_end		= 0x48056fff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* dma_system master ports */
-static struct omap_hwmod_ocp_if *omap3xxx_dma_system_masters[] = {
-	&omap3xxx_dma_system__l3,
-};
-
-/* l4_cfg -> dma_system */
-static struct omap_hwmod_ocp_if omap3xxx_l4_core__dma_system = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap3xxx_dma_system_hwmod,
-	.clk		= "core_l4_ick",
-	.addr		= omap3xxx_dma_system_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* dma_system slave ports */
-static struct omap_hwmod_ocp_if *omap3xxx_dma_system_slaves[] = {
-	&omap3xxx_l4_core__dma_system,
-};
-
 static struct omap_hwmod omap3xxx_dma_system_hwmod = {
 	.name		= "dma",
 	.class		= &omap3xxx_dma_hwmod_class,
@@ -2223,10 +1050,6 @@ static struct omap_hwmod omap3xxx_dma_system_hwmod = {
 			.idlest_idle_bit	= OMAP3430_ST_SDMA_SHIFT,
 		},
 	},
-	.slaves		= omap3xxx_dma_system_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_dma_system_slaves),
-	.masters	= omap3xxx_dma_system_masters,
-	.masters_cnt	= ARRAY_SIZE(omap3xxx_dma_system_masters),
 	.dev_attr	= &dma_dev_attr,
 	.flags		= HWMOD_NO_IDLEST,
 };
@@ -2253,36 +1076,12 @@ static struct omap_hwmod_class omap3xxx_mcbsp_hwmod_class = {
 
 /* mcbsp1 */
 static struct omap_hwmod_irq_info omap3xxx_mcbsp1_irqs[] = {
-	{ .name = "irq", .irq = 16 },
+	{ .name = "common", .irq = 16 },
 	{ .name = "tx", .irq = 59 },
 	{ .name = "rx", .irq = 60 },
 	{ .irq = -1 }
 };
 
-static struct omap_hwmod_addr_space omap3xxx_mcbsp1_addrs[] = {
-	{
-		.name		= "mpu",
-		.pa_start	= 0x48074000,
-		.pa_end		= 0x480740ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_core -> mcbsp1 */
-static struct omap_hwmod_ocp_if omap3xxx_l4_core__mcbsp1 = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap3xxx_mcbsp1_hwmod,
-	.clk		= "mcbsp1_ick",
-	.addr		= omap3xxx_mcbsp1_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mcbsp1 slave ports */
-static struct omap_hwmod_ocp_if *omap3xxx_mcbsp1_slaves[] = {
-	&omap3xxx_l4_core__mcbsp1,
-};
-
 static struct omap_hwmod omap3xxx_mcbsp1_hwmod = {
 	.name		= "mcbsp1",
 	.class		= &omap3xxx_mcbsp_hwmod_class,
@@ -2298,42 +1097,16 @@ static struct omap_hwmod omap3xxx_mcbsp1_hwmod = {
 			.idlest_idle_bit = OMAP3430_ST_MCBSP1_SHIFT,
 		},
 	},
-	.slaves		= omap3xxx_mcbsp1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_mcbsp1_slaves),
 };
 
 /* mcbsp2 */
 static struct omap_hwmod_irq_info omap3xxx_mcbsp2_irqs[] = {
-	{ .name = "irq", .irq = 17 },
+	{ .name = "common", .irq = 17 },
 	{ .name = "tx", .irq = 62 },
 	{ .name = "rx", .irq = 63 },
 	{ .irq = -1 }
 };
 
-static struct omap_hwmod_addr_space omap3xxx_mcbsp2_addrs[] = {
-	{
-		.name		= "mpu",
-		.pa_start	= 0x49022000,
-		.pa_end		= 0x490220ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> mcbsp2 */
-static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp2 = {
-	.master		= &omap3xxx_l4_per_hwmod,
-	.slave		= &omap3xxx_mcbsp2_hwmod,
-	.clk		= "mcbsp2_ick",
-	.addr		= omap3xxx_mcbsp2_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mcbsp2 slave ports */
-static struct omap_hwmod_ocp_if *omap3xxx_mcbsp2_slaves[] = {
-	&omap3xxx_l4_per__mcbsp2,
-};
-
 static struct omap_mcbsp_dev_attr omap34xx_mcbsp2_dev_attr = {
 	.sidetone	= "mcbsp2_sidetone",
 };
@@ -2353,45 +1126,19 @@ static struct omap_hwmod omap3xxx_mcbsp2_hwmod = {
 			.idlest_idle_bit = OMAP3430_ST_MCBSP2_SHIFT,
 		},
 	},
-	.slaves		= omap3xxx_mcbsp2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_mcbsp2_slaves),
 	.dev_attr	= &omap34xx_mcbsp2_dev_attr,
 };
 
 /* mcbsp3 */
 static struct omap_hwmod_irq_info omap3xxx_mcbsp3_irqs[] = {
-	{ .name = "irq", .irq = 22 },
+	{ .name = "common", .irq = 22 },
 	{ .name = "tx", .irq = 89 },
 	{ .name = "rx", .irq = 90 },
 	{ .irq = -1 }
 };
 
-static struct omap_hwmod_addr_space omap3xxx_mcbsp3_addrs[] = {
-	{
-		.name		= "mpu",
-		.pa_start	= 0x49024000,
-		.pa_end		= 0x490240ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> mcbsp3 */
-static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp3 = {
-	.master		= &omap3xxx_l4_per_hwmod,
-	.slave		= &omap3xxx_mcbsp3_hwmod,
-	.clk		= "mcbsp3_ick",
-	.addr		= omap3xxx_mcbsp3_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mcbsp3 slave ports */
-static struct omap_hwmod_ocp_if *omap3xxx_mcbsp3_slaves[] = {
-	&omap3xxx_l4_per__mcbsp3,
-};
-
 static struct omap_mcbsp_dev_attr omap34xx_mcbsp3_dev_attr = {
-	.sidetone       = "mcbsp3_sidetone",
+	.sidetone	= "mcbsp3_sidetone",
 };
 
 static struct omap_hwmod omap3xxx_mcbsp3_hwmod = {
@@ -2409,14 +1156,12 @@ static struct omap_hwmod omap3xxx_mcbsp3_hwmod = {
 			.idlest_idle_bit = OMAP3430_ST_MCBSP3_SHIFT,
 		},
 	},
-	.slaves		= omap3xxx_mcbsp3_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_mcbsp3_slaves),
 	.dev_attr	= &omap34xx_mcbsp3_dev_attr,
 };
 
 /* mcbsp4 */
 static struct omap_hwmod_irq_info omap3xxx_mcbsp4_irqs[] = {
-	{ .name = "irq", .irq = 23 },
+	{ .name = "common", .irq = 23 },
 	{ .name = "tx", .irq = 54 },
 	{ .name = "rx", .irq = 55 },
 	{ .irq = -1 }
@@ -2428,30 +1173,6 @@ static struct omap_hwmod_dma_info omap3xxx_mcbsp4_sdma_chs[] = {
 	{ .dma_req = -1 }
 };
 
-static struct omap_hwmod_addr_space omap3xxx_mcbsp4_addrs[] = {
-	{
-		.name		= "mpu",
-		.pa_start	= 0x49026000,
-		.pa_end		= 0x490260ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> mcbsp4 */
-static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp4 = {
-	.master		= &omap3xxx_l4_per_hwmod,
-	.slave		= &omap3xxx_mcbsp4_hwmod,
-	.clk		= "mcbsp4_ick",
-	.addr		= omap3xxx_mcbsp4_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mcbsp4 slave ports */
-static struct omap_hwmod_ocp_if *omap3xxx_mcbsp4_slaves[] = {
-	&omap3xxx_l4_per__mcbsp4,
-};
-
 static struct omap_hwmod omap3xxx_mcbsp4_hwmod = {
 	.name		= "mcbsp4",
 	.class		= &omap3xxx_mcbsp_hwmod_class,
@@ -2467,13 +1188,11 @@ static struct omap_hwmod omap3xxx_mcbsp4_hwmod = {
 			.idlest_idle_bit = OMAP3430_ST_MCBSP4_SHIFT,
 		},
 	},
-	.slaves		= omap3xxx_mcbsp4_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_mcbsp4_slaves),
 };
 
 /* mcbsp5 */
 static struct omap_hwmod_irq_info omap3xxx_mcbsp5_irqs[] = {
-	{ .name = "irq", .irq = 27 },
+	{ .name = "common", .irq = 27 },
 	{ .name = "tx", .irq = 81 },
 	{ .name = "rx", .irq = 82 },
 	{ .irq = -1 }
@@ -2485,30 +1204,6 @@ static struct omap_hwmod_dma_info omap3xxx_mcbsp5_sdma_chs[] = {
 	{ .dma_req = -1 }
 };
 
-static struct omap_hwmod_addr_space omap3xxx_mcbsp5_addrs[] = {
-	{
-		.name		= "mpu",
-		.pa_start	= 0x48096000,
-		.pa_end		= 0x480960ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_core -> mcbsp5 */
-static struct omap_hwmod_ocp_if omap3xxx_l4_core__mcbsp5 = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap3xxx_mcbsp5_hwmod,
-	.clk		= "mcbsp5_ick",
-	.addr		= omap3xxx_mcbsp5_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mcbsp5 slave ports */
-static struct omap_hwmod_ocp_if *omap3xxx_mcbsp5_slaves[] = {
-	&omap3xxx_l4_core__mcbsp5,
-};
-
 static struct omap_hwmod omap3xxx_mcbsp5_hwmod = {
 	.name		= "mcbsp5",
 	.class		= &omap3xxx_mcbsp_hwmod_class,
@@ -2524,11 +1219,9 @@ static struct omap_hwmod omap3xxx_mcbsp5_hwmod = {
 			.idlest_idle_bit = OMAP3430_ST_MCBSP5_SHIFT,
 		},
 	},
-	.slaves		= omap3xxx_mcbsp5_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_mcbsp5_slaves),
 };
-/* 'mcbsp sidetone' class */
 
+/* 'mcbsp sidetone' class */
 static struct omap_hwmod_class_sysconfig omap3xxx_mcbsp_sidetone_sysc = {
 	.sysc_offs	= 0x0010,
 	.sysc_flags	= SYSC_HAS_AUTOIDLE,
@@ -2546,30 +1239,6 @@ static struct omap_hwmod_irq_info omap3xxx_mcbsp2_sidetone_irqs[] = {
 	{ .irq = -1 }
 };
 
-static struct omap_hwmod_addr_space omap3xxx_mcbsp2_sidetone_addrs[] = {
-	{
-		.name		= "sidetone",
-		.pa_start	= 0x49028000,
-		.pa_end		= 0x490280ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> mcbsp2_sidetone */
-static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp2_sidetone = {
-	.master		= &omap3xxx_l4_per_hwmod,
-	.slave		= &omap3xxx_mcbsp2_sidetone_hwmod,
-	.clk		= "mcbsp2_ick",
-	.addr		= omap3xxx_mcbsp2_sidetone_addrs,
-	.user		= OCP_USER_MPU,
-};
-
-/* mcbsp2_sidetone slave ports */
-static struct omap_hwmod_ocp_if *omap3xxx_mcbsp2_sidetone_slaves[] = {
-	&omap3xxx_l4_per__mcbsp2_sidetone,
-};
-
 static struct omap_hwmod omap3xxx_mcbsp2_sidetone_hwmod = {
 	.name		= "mcbsp2_sidetone",
 	.class		= &omap3xxx_mcbsp_sidetone_hwmod_class,
@@ -2584,8 +1253,6 @@ static struct omap_hwmod omap3xxx_mcbsp2_sidetone_hwmod = {
 			.idlest_idle_bit = OMAP3430_ST_MCBSP2_SHIFT,
 		},
 	},
-	.slaves		= omap3xxx_mcbsp2_sidetone_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_mcbsp2_sidetone_slaves),
 };
 
 /* mcbsp3_sidetone */
@@ -2594,30 +1261,6 @@ static struct omap_hwmod_irq_info omap3xxx_mcbsp3_sidetone_irqs[] = {
 	{ .irq = -1 }
 };
 
-static struct omap_hwmod_addr_space omap3xxx_mcbsp3_sidetone_addrs[] = {
-	{
-		.name		= "sidetone",
-		.pa_start	= 0x4902A000,
-		.pa_end		= 0x4902A0ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> mcbsp3_sidetone */
-static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp3_sidetone = {
-	.master		= &omap3xxx_l4_per_hwmod,
-	.slave		= &omap3xxx_mcbsp3_sidetone_hwmod,
-	.clk		= "mcbsp3_ick",
-	.addr		= omap3xxx_mcbsp3_sidetone_addrs,
-	.user		= OCP_USER_MPU,
-};
-
-/* mcbsp3_sidetone slave ports */
-static struct omap_hwmod_ocp_if *omap3xxx_mcbsp3_sidetone_slaves[] = {
-	&omap3xxx_l4_per__mcbsp3_sidetone,
-};
-
 static struct omap_hwmod omap3xxx_mcbsp3_sidetone_hwmod = {
 	.name		= "mcbsp3_sidetone",
 	.class		= &omap3xxx_mcbsp_sidetone_hwmod_class,
@@ -2632,11 +1275,8 @@ static struct omap_hwmod omap3xxx_mcbsp3_sidetone_hwmod = {
 			.idlest_idle_bit = OMAP3430_ST_MCBSP3_SHIFT,
 		},
 	},
-	.slaves		= omap3xxx_mcbsp3_sidetone_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_mcbsp3_sidetone_slaves),
 };
 
-
 /* SR common */
 static struct omap_hwmod_sysc_fields omap34xx_sr_sysc_fields = {
 	.clkact_shift	= 20,
@@ -2657,7 +1297,7 @@ static struct omap_hwmod_class omap34xx_smartreflex_hwmod_class = {
 
 static struct omap_hwmod_sysc_fields omap36xx_sr_sysc_fields = {
 	.sidle_shift	= 24,
-	.enwkup_shift	= 26
+	.enwkup_shift	= 26,
 };
 
 static struct omap_hwmod_class_sysconfig omap36xx_sr_sysc = {
@@ -2679,12 +1319,13 @@ static struct omap_smartreflex_dev_attr sr1_dev_attr = {
 	.sensor_voltdm_name   = "mpu_iva",
 };
 
-static struct omap_hwmod_ocp_if *omap3_sr1_slaves[] = {
-	&omap3_l4_core__sr1,
+static struct omap_hwmod_irq_info omap3_smartreflex_mpu_irqs[] = {
+	{ .irq = 18 },
+	{ .irq = -1 }
 };
 
 static struct omap_hwmod omap34xx_sr1_hwmod = {
-	.name		= "sr1_hwmod",
+	.name		= "sr1",
 	.class		= &omap34xx_smartreflex_hwmod_class,
 	.main_clk	= "sr1_fck",
 	.prcm		= {
@@ -2696,15 +1337,13 @@ static struct omap_hwmod omap34xx_sr1_hwmod = {
 			.idlest_idle_bit = OMAP3430_EN_SR1_SHIFT,
 		},
 	},
-	.slaves		= omap3_sr1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3_sr1_slaves),
 	.dev_attr	= &sr1_dev_attr,
 	.mpu_irqs	= omap3_smartreflex_mpu_irqs,
 	.flags		= HWMOD_SET_DEFAULT_CLOCKACT,
 };
 
 static struct omap_hwmod omap36xx_sr1_hwmod = {
-	.name		= "sr1_hwmod",
+	.name		= "sr1",
 	.class		= &omap36xx_smartreflex_hwmod_class,
 	.main_clk	= "sr1_fck",
 	.prcm		= {
@@ -2716,8 +1355,6 @@ static struct omap_hwmod omap36xx_sr1_hwmod = {
 			.idlest_idle_bit = OMAP3430_EN_SR1_SHIFT,
 		},
 	},
-	.slaves		= omap3_sr1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3_sr1_slaves),
 	.dev_attr	= &sr1_dev_attr,
 	.mpu_irqs	= omap3_smartreflex_mpu_irqs,
 };
@@ -2727,12 +1364,13 @@ static struct omap_smartreflex_dev_attr sr2_dev_attr = {
 	.sensor_voltdm_name	= "core",
 };
 
-static struct omap_hwmod_ocp_if *omap3_sr2_slaves[] = {
-	&omap3_l4_core__sr2,
+static struct omap_hwmod_irq_info omap3_smartreflex_core_irqs[] = {
+	{ .irq = 19 },
+	{ .irq = -1 }
 };
 
 static struct omap_hwmod omap34xx_sr2_hwmod = {
-	.name		= "sr2_hwmod",
+	.name		= "sr2",
 	.class		= &omap34xx_smartreflex_hwmod_class,
 	.main_clk	= "sr2_fck",
 	.prcm		= {
@@ -2744,15 +1382,13 @@ static struct omap_hwmod omap34xx_sr2_hwmod = {
 			.idlest_idle_bit = OMAP3430_EN_SR2_SHIFT,
 		},
 	},
-	.slaves		= omap3_sr2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3_sr2_slaves),
 	.dev_attr	= &sr2_dev_attr,
 	.mpu_irqs	= omap3_smartreflex_core_irqs,
 	.flags		= HWMOD_SET_DEFAULT_CLOCKACT,
 };
 
 static struct omap_hwmod omap36xx_sr2_hwmod = {
-	.name		= "sr2_hwmod",
+	.name		= "sr2",
 	.class		= &omap36xx_smartreflex_hwmod_class,
 	.main_clk	= "sr2_fck",
 	.prcm		= {
@@ -2764,8 +1400,6 @@ static struct omap_hwmod omap36xx_sr2_hwmod = {
 			.idlest_idle_bit = OMAP3430_EN_SR2_SHIFT,
 		},
 	},
-	.slaves		= omap3_sr2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3_sr2_slaves),
 	.dev_attr	= &sr2_dev_attr,
 	.mpu_irqs	= omap3_smartreflex_core_irqs,
 };
@@ -2791,34 +1425,11 @@ static struct omap_hwmod_class omap3xxx_mailbox_hwmod_class = {
 	.sysc = &omap3xxx_mailbox_sysc,
 };
 
-static struct omap_hwmod omap3xxx_mailbox_hwmod;
 static struct omap_hwmod_irq_info omap3xxx_mailbox_irqs[] = {
 	{ .irq = 26 },
 	{ .irq = -1 }
 };
 
-static struct omap_hwmod_addr_space omap3xxx_mailbox_addrs[] = {
-	{
-		.pa_start	= 0x48094000,
-		.pa_end		= 0x480941ff,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
-/* l4_core -> mailbox */
-static struct omap_hwmod_ocp_if omap3xxx_l4_core__mailbox = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap3xxx_mailbox_hwmod,
-	.addr		= omap3xxx_mailbox_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mailbox slave ports */
-static struct omap_hwmod_ocp_if *omap3xxx_mailbox_slaves[] = {
-	&omap3xxx_l4_core__mailbox,
-};
-
 static struct omap_hwmod omap3xxx_mailbox_hwmod = {
 	.name		= "mailbox",
 	.class		= &omap3xxx_mailbox_hwmod_class,
@@ -2833,53 +1444,6 @@ static struct omap_hwmod omap3xxx_mailbox_hwmod = {
 			.idlest_idle_bit = OMAP3430_ST_MAILBOXES_SHIFT,
 		},
 	},
-	.slaves		= omap3xxx_mailbox_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_mailbox_slaves),
-};
-
-/* l4 core -> mcspi1 interface */
-static struct omap_hwmod_ocp_if omap34xx_l4_core__mcspi1 = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap34xx_mcspi1,
-	.clk		= "mcspi1_ick",
-	.addr		= omap2_mcspi1_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4 core -> mcspi2 interface */
-static struct omap_hwmod_ocp_if omap34xx_l4_core__mcspi2 = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap34xx_mcspi2,
-	.clk		= "mcspi2_ick",
-	.addr		= omap2_mcspi2_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4 core -> mcspi3 interface */
-static struct omap_hwmod_ocp_if omap34xx_l4_core__mcspi3 = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap34xx_mcspi3,
-	.clk		= "mcspi3_ick",
-	.addr		= omap2430_mcspi3_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4 core -> mcspi4 interface */
-static struct omap_hwmod_addr_space omap34xx_mcspi4_addr_space[] = {
-	{
-		.pa_start	= 0x480ba000,
-		.pa_end		= 0x480ba0ff,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if omap34xx_l4_core__mcspi4 = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap34xx_mcspi4,
-	.clk		= "mcspi4_ick",
-	.addr		= omap34xx_mcspi4_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
 /*
@@ -2906,10 +1470,6 @@ static struct omap_hwmod_class omap34xx_mcspi_class = {
 };
 
 /* mcspi1 */
-static struct omap_hwmod_ocp_if *omap34xx_mcspi1_slaves[] = {
-	&omap34xx_l4_core__mcspi1,
-};
-
 static struct omap2_mcspi_dev_attr omap_mcspi1_dev_attr = {
 	.num_chipselect = 4,
 };
@@ -2928,17 +1488,11 @@ static struct omap_hwmod omap34xx_mcspi1 = {
 			.idlest_idle_bit = OMAP3430_ST_MCSPI1_SHIFT,
 		},
 	},
-	.slaves		= omap34xx_mcspi1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap34xx_mcspi1_slaves),
 	.class		= &omap34xx_mcspi_class,
 	.dev_attr       = &omap_mcspi1_dev_attr,
 };
 
 /* mcspi2 */
-static struct omap_hwmod_ocp_if *omap34xx_mcspi2_slaves[] = {
-	&omap34xx_l4_core__mcspi2,
-};
-
 static struct omap2_mcspi_dev_attr omap_mcspi2_dev_attr = {
 	.num_chipselect = 2,
 };
@@ -2957,8 +1511,6 @@ static struct omap_hwmod omap34xx_mcspi2 = {
 			.idlest_idle_bit = OMAP3430_ST_MCSPI2_SHIFT,
 		},
 	},
-	.slaves		= omap34xx_mcspi2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap34xx_mcspi2_slaves),
 	.class		= &omap34xx_mcspi_class,
 	.dev_attr       = &omap_mcspi2_dev_attr,
 };
@@ -2977,10 +1529,6 @@ static struct omap_hwmod_dma_info omap34xx_mcspi3_sdma_reqs[] = {
 	{ .dma_req = -1 }
 };
 
-static struct omap_hwmod_ocp_if *omap34xx_mcspi3_slaves[] = {
-	&omap34xx_l4_core__mcspi3,
-};
-
 static struct omap2_mcspi_dev_attr omap_mcspi3_dev_attr = {
 	.num_chipselect = 2,
 };
@@ -2999,13 +1547,11 @@ static struct omap_hwmod omap34xx_mcspi3 = {
 			.idlest_idle_bit = OMAP3430_ST_MCSPI3_SHIFT,
 		},
 	},
-	.slaves		= omap34xx_mcspi3_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap34xx_mcspi3_slaves),
 	.class		= &omap34xx_mcspi_class,
 	.dev_attr       = &omap_mcspi3_dev_attr,
 };
 
-/* SPI4 */
+/* mcspi4 */
 static struct omap_hwmod_irq_info omap34xx_mcspi4_mpu_irqs[] = {
 	{ .name = "irq", .irq = INT_34XX_SPI4_IRQ }, /* 48 */
 	{ .irq = -1 }
@@ -3017,10 +1563,6 @@ static struct omap_hwmod_dma_info omap34xx_mcspi4_sdma_reqs[] = {
 	{ .dma_req = -1 }
 };
 
-static struct omap_hwmod_ocp_if *omap34xx_mcspi4_slaves[] = {
-	&omap34xx_l4_core__mcspi4,
-};
-
 static struct omap2_mcspi_dev_attr omap_mcspi4_dev_attr = {
 	.num_chipselect = 1,
 };
@@ -3039,15 +1581,11 @@ static struct omap_hwmod omap34xx_mcspi4 = {
 			.idlest_idle_bit = OMAP3430_ST_MCSPI4_SHIFT,
 		},
 	},
-	.slaves		= omap34xx_mcspi4_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap34xx_mcspi4_slaves),
 	.class		= &omap34xx_mcspi_class,
 	.dev_attr       = &omap_mcspi4_dev_attr,
 };
 
-/*
- * usbhsotg
- */
+/* usbhsotg */
 static struct omap_hwmod_class_sysconfig omap3xxx_usbhsotg_sysc = {
 	.rev_offs	= 0x0400,
 	.sysc_offs	= 0x0404,
@@ -3064,6 +1602,7 @@ static struct omap_hwmod_class usbotg_class = {
 	.name = "usbotg",
 	.sysc = &omap3xxx_usbhsotg_sysc,
 };
+
 /* usb_otg_hs */
 static struct omap_hwmod_irq_info omap3xxx_usbhsotg_mpu_irqs[] = {
 
@@ -3086,10 +1625,6 @@ static struct omap_hwmod omap3xxx_usbhsotg_hwmod = {
 			.idlest_stdby_bit = OMAP3430ES2_ST_HSOTGUSB_STDBY_SHIFT
 		},
 	},
-	.masters	= omap3xxx_usbhsotg_masters,
-	.masters_cnt	= ARRAY_SIZE(omap3xxx_usbhsotg_masters),
-	.slaves		= omap3xxx_usbhsotg_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_usbhsotg_slaves),
 	.class		= &usbotg_class,
 
 	/*
@@ -3121,15 +1656,10 @@ static struct omap_hwmod am35xx_usbhsotg_hwmod = {
 		.omap2 = {
 		},
 	},
-	.masters	= am35xx_usbhsotg_masters,
-	.masters_cnt	= ARRAY_SIZE(am35xx_usbhsotg_masters),
-	.slaves		= am35xx_usbhsotg_slaves,
-	.slaves_cnt	= ARRAY_SIZE(am35xx_usbhsotg_slaves),
 	.class		= &am35xx_usbotg_class,
 };
 
 /* MMC/SD/SDIO common */
-
 static struct omap_hwmod_class_sysconfig omap34xx_mmc_sysc = {
 	.rev_offs	= 0x1fc,
 	.sysc_offs	= 0x10,
@@ -3163,10 +1693,6 @@ static struct omap_hwmod_opt_clk omap34xx_mmc1_opt_clks[] = {
 	{ .role = "dbck", .clk = "omap_32k_fck", },
 };
 
-static struct omap_hwmod_ocp_if *omap3xxx_mmc1_slaves[] = {
-	&omap3xxx_l4_core__mmc1,
-};
-
 static struct omap_mmc_dev_attr mmc1_dev_attr = {
 	.flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
 };
@@ -3194,8 +1720,6 @@ static struct omap_hwmod omap3xxx_pre_es3_mmc1_hwmod = {
 		},
 	},
 	.dev_attr	= &mmc1_pre_es3_dev_attr,
-	.slaves		= omap3xxx_mmc1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_mmc1_slaves),
 	.class		= &omap34xx_mmc_class,
 };
 
@@ -3216,8 +1740,6 @@ static struct omap_hwmod omap3xxx_es3plus_mmc1_hwmod = {
 		},
 	},
 	.dev_attr	= &mmc1_dev_attr,
-	.slaves		= omap3xxx_mmc1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_mmc1_slaves),
 	.class		= &omap34xx_mmc_class,
 };
 
@@ -3238,10 +1760,6 @@ static struct omap_hwmod_opt_clk omap34xx_mmc2_opt_clks[] = {
 	{ .role = "dbck", .clk = "omap_32k_fck", },
 };
 
-static struct omap_hwmod_ocp_if *omap3xxx_mmc2_slaves[] = {
-	&omap3xxx_l4_core__mmc2,
-};
-
 /* See 35xx errata 2.1.1.128 in SPRZ278F */
 static struct omap_mmc_dev_attr mmc2_pre_es3_dev_attr = {
 	.flags = OMAP_HSMMC_BROKEN_MULTIBLOCK_READ,
@@ -3264,8 +1782,6 @@ static struct omap_hwmod omap3xxx_pre_es3_mmc2_hwmod = {
 		},
 	},
 	.dev_attr	= &mmc2_pre_es3_dev_attr,
-	.slaves		= omap3xxx_mmc2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_mmc2_slaves),
 	.class		= &omap34xx_mmc_class,
 };
 
@@ -3285,8 +1801,6 @@ static struct omap_hwmod omap3xxx_es3plus_mmc2_hwmod = {
 			.idlest_idle_bit = OMAP3430_ST_MMC2_SHIFT,
 		},
 	},
-	.slaves		= omap3xxx_mmc2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_mmc2_slaves),
 	.class		= &omap34xx_mmc_class,
 };
 
@@ -3307,10 +1821,6 @@ static struct omap_hwmod_opt_clk omap34xx_mmc3_opt_clks[] = {
 	{ .role = "dbck", .clk = "omap_32k_fck", },
 };
 
-static struct omap_hwmod_ocp_if *omap3xxx_mmc3_slaves[] = {
-	&omap3xxx_l4_core__mmc3,
-};
-
 static struct omap_hwmod omap3xxx_mmc3_hwmod = {
 	.name		= "mmc3",
 	.mpu_irqs	= omap34xx_mmc3_mpu_irqs,
@@ -3326,8 +1836,6 @@ static struct omap_hwmod omap3xxx_mmc3_hwmod = {
 			.idlest_idle_bit = OMAP3430_ST_MMC3_SHIFT,
 		},
 	},
-	.slaves		= omap3xxx_mmc3_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_mmc3_slaves),
 	.class		= &omap34xx_mmc_class,
 };
 
@@ -3335,12 +1843,6 @@ static struct omap_hwmod omap3xxx_mmc3_hwmod = {
  * 'usb_host_hs' class
  * high-speed multi-port usb host controller
  */
-static struct omap_hwmod_ocp_if omap3xxx_usb_host_hs__l3_main_2 = {
-	.master		= &omap3xxx_usb_host_hs_hwmod,
-	.slave		= &omap3xxx_l3_main_hwmod,
-	.clk		= "core_l3_ick",
-	.user		= OCP_USER_MPU,
-};
 
 static struct omap_hwmod_class_sysconfig omap3xxx_usb_host_hs_sysc = {
 	.rev_offs	= 0x0000,
@@ -3359,42 +1861,6 @@ static struct omap_hwmod_class omap3xxx_usb_host_hs_hwmod_class = {
 	.sysc = &omap3xxx_usb_host_hs_sysc,
 };
 
-static struct omap_hwmod_ocp_if *omap3xxx_usb_host_hs_masters[] = {
-	&omap3xxx_usb_host_hs__l3_main_2,
-};
-
-static struct omap_hwmod_addr_space omap3xxx_usb_host_hs_addrs[] = {
-	{
-		.name		= "uhh",
-		.pa_start	= 0x48064000,
-		.pa_end		= 0x480643ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{
-		.name		= "ohci",
-		.pa_start	= 0x48064400,
-		.pa_end		= 0x480647ff,
-	},
-	{
-		.name		= "ehci",
-		.pa_start	= 0x48064800,
-		.pa_end		= 0x48064cff,
-	},
-	{}
-};
-
-static struct omap_hwmod_ocp_if omap3xxx_l4_core__usb_host_hs = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap3xxx_usb_host_hs_hwmod,
-	.clk		= "usbhost_ick",
-	.addr		= omap3xxx_usb_host_hs_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_ocp_if *omap3xxx_usb_host_hs_slaves[] = {
-	&omap3xxx_l4_core__usb_host_hs,
-};
-
 static struct omap_hwmod_opt_clk omap3xxx_usb_host_hs_opt_clks[] = {
 	  { .role = "ehci_logic_fck", .clk = "usbhost_120m_fck", },
 };
@@ -3423,10 +1889,6 @@ static struct omap_hwmod omap3xxx_usb_host_hs_hwmod = {
 	},
 	.opt_clks	= omap3xxx_usb_host_hs_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(omap3xxx_usb_host_hs_opt_clks),
-	.slaves		= omap3xxx_usb_host_hs_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_usb_host_hs_slaves),
-	.masters	= omap3xxx_usb_host_hs_masters,
-	.masters_cnt	= ARRAY_SIZE(omap3xxx_usb_host_hs_masters),
 
 	/*
 	 * Errata: USBHOST Configured In Smart-Idle Can Lead To a Deadlock
@@ -3502,6 +1964,1134 @@ static struct omap_hwmod_irq_info omap3xxx_usb_tll_hs_irqs[] = {
 	{ .irq = -1 }
 };
 
+static struct omap_hwmod omap3xxx_usb_tll_hs_hwmod = {
+	.name		= "usb_tll_hs",
+	.class		= &omap3xxx_usb_tll_hs_hwmod_class,
+	.clkdm_name	= "l3_init_clkdm",
+	.mpu_irqs	= omap3xxx_usb_tll_hs_irqs,
+	.main_clk	= "usbtll_fck",
+	.prcm = {
+		.omap2 = {
+			.module_offs = CORE_MOD,
+			.prcm_reg_id = 3,
+			.module_bit = OMAP3430ES2_EN_USBTLL_SHIFT,
+			.idlest_reg_id = 3,
+			.idlest_idle_bit = OMAP3430ES2_ST_USBTLL_SHIFT,
+		},
+	},
+};
+
+static struct omap_hwmod omap3xxx_hdq1w_hwmod = {
+	.name		= "hdq1w",
+	.mpu_irqs	= omap2_hdq1w_mpu_irqs,
+	.main_clk	= "hdq_fck",
+	.prcm		= {
+		.omap2 = {
+			.module_offs = CORE_MOD,
+			.prcm_reg_id = 1,
+			.module_bit = OMAP3430_EN_HDQ_SHIFT,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP3430_ST_HDQ_SHIFT,
+		},
+	},
+	.class		= &omap2_hdq1w_class,
+};
+
+/*
+ * '32K sync counter' class
+ * 32-bit ordinary counter, clocked by the falling edge of the 32 khz clock
+ */
+static struct omap_hwmod_class_sysconfig omap3xxx_counter_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0004,
+	.sysc_flags	= SYSC_HAS_SIDLEMODE,
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap3xxx_counter_hwmod_class = {
+	.name	= "counter",
+	.sysc	= &omap3xxx_counter_sysc,
+};
+
+static struct omap_hwmod omap3xxx_counter_32k_hwmod = {
+	.name		= "counter_32k",
+	.class		= &omap3xxx_counter_hwmod_class,
+	.clkdm_name	= "wkup_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE,
+	.main_clk	= "wkup_32k_fck",
+	.prcm		= {
+		.omap2	= {
+			.module_offs = WKUP_MOD,
+			.prcm_reg_id = 1,
+			.module_bit = OMAP3430_ST_32KSYNC_SHIFT,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP3430_ST_32KSYNC_SHIFT,
+		},
+	},
+};
+
+/*
+ * interfaces
+ */
+
+/* L3 -> L4_CORE interface */
+static struct omap_hwmod_ocp_if omap3xxx_l3_main__l4_core = {
+	.master	= &omap3xxx_l3_main_hwmod,
+	.slave	= &omap3xxx_l4_core_hwmod,
+	.user	= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* L3 -> L4_PER interface */
+static struct omap_hwmod_ocp_if omap3xxx_l3_main__l4_per = {
+	.master = &omap3xxx_l3_main_hwmod,
+	.slave	= &omap3xxx_l4_per_hwmod,
+	.user	= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap3xxx_l3_main_addrs[] = {
+	{
+		.pa_start	= 0x68000000,
+		.pa_end		= 0x6800ffff,
+		.flags		= ADDR_TYPE_RT,
+	},
+	{ }
+};
+
+/* MPU -> L3 interface */
+static struct omap_hwmod_ocp_if omap3xxx_mpu__l3_main = {
+	.master   = &omap3xxx_mpu_hwmod,
+	.slave    = &omap3xxx_l3_main_hwmod,
+	.addr     = omap3xxx_l3_main_addrs,
+	.user	= OCP_USER_MPU,
+};
+
+/* DSS -> l3 */
+static struct omap_hwmod_ocp_if omap3430es1_dss__l3 = {
+	.master		= &omap3430es1_dss_core_hwmod,
+	.slave		= &omap3xxx_l3_main_hwmod,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if omap3xxx_dss__l3 = {
+	.master		= &omap3xxx_dss_core_hwmod,
+	.slave		= &omap3xxx_l3_main_hwmod,
+	.fw = {
+		.omap2 = {
+			.l3_perm_bit  = OMAP3_L3_CORE_FW_INIT_ID_DSS,
+			.flags	= OMAP_FIREWALL_L3,
+		}
+	},
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_core -> usbhsotg interface */
+static struct omap_hwmod_ocp_if omap3xxx_usbhsotg__l3 = {
+	.master		= &omap3xxx_usbhsotg_hwmod,
+	.slave		= &omap3xxx_l3_main_hwmod,
+	.clk		= "core_l3_ick",
+	.user		= OCP_USER_MPU,
+};
+
+/* l3_core -> am35xx_usbhsotg interface */
+static struct omap_hwmod_ocp_if am35xx_usbhsotg__l3 = {
+	.master		= &am35xx_usbhsotg_hwmod,
+	.slave		= &omap3xxx_l3_main_hwmod,
+	.clk		= "core_l3_ick",
+	.user		= OCP_USER_MPU,
+};
+/* L4_CORE -> L4_WKUP interface */
+static struct omap_hwmod_ocp_if omap3xxx_l4_core__l4_wkup = {
+	.master	= &omap3xxx_l4_core_hwmod,
+	.slave	= &omap3xxx_l4_wkup_hwmod,
+	.user	= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* L4 CORE -> MMC1 interface */
+static struct omap_hwmod_ocp_if omap3xxx_l4_core__pre_es3_mmc1 = {
+	.master		= &omap3xxx_l4_core_hwmod,
+	.slave		= &omap3xxx_pre_es3_mmc1_hwmod,
+	.clk		= "mmchs1_ick",
+	.addr		= omap2430_mmc1_addr_space,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+	.flags		= OMAP_FIREWALL_L4
+};
+
+static struct omap_hwmod_ocp_if omap3xxx_l4_core__es3plus_mmc1 = {
+	.master		= &omap3xxx_l4_core_hwmod,
+	.slave		= &omap3xxx_es3plus_mmc1_hwmod,
+	.clk		= "mmchs1_ick",
+	.addr		= omap2430_mmc1_addr_space,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+	.flags		= OMAP_FIREWALL_L4
+};
+
+/* L4 CORE -> MMC2 interface */
+static struct omap_hwmod_ocp_if omap3xxx_l4_core__pre_es3_mmc2 = {
+	.master		= &omap3xxx_l4_core_hwmod,
+	.slave		= &omap3xxx_pre_es3_mmc2_hwmod,
+	.clk		= "mmchs2_ick",
+	.addr		= omap2430_mmc2_addr_space,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+	.flags		= OMAP_FIREWALL_L4
+};
+
+static struct omap_hwmod_ocp_if omap3xxx_l4_core__es3plus_mmc2 = {
+	.master		= &omap3xxx_l4_core_hwmod,
+	.slave		= &omap3xxx_es3plus_mmc2_hwmod,
+	.clk		= "mmchs2_ick",
+	.addr		= omap2430_mmc2_addr_space,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+	.flags		= OMAP_FIREWALL_L4
+};
+
+/* L4 CORE -> MMC3 interface */
+static struct omap_hwmod_addr_space omap3xxx_mmc3_addr_space[] = {
+	{
+		.pa_start	= 0x480ad000,
+		.pa_end		= 0x480ad1ff,
+		.flags		= ADDR_TYPE_RT,
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if omap3xxx_l4_core__mmc3 = {
+	.master		= &omap3xxx_l4_core_hwmod,
+	.slave		= &omap3xxx_mmc3_hwmod,
+	.clk		= "mmchs3_ick",
+	.addr		= omap3xxx_mmc3_addr_space,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+	.flags		= OMAP_FIREWALL_L4
+};
+
+/* L4 CORE -> UART1 interface */
+static struct omap_hwmod_addr_space omap3xxx_uart1_addr_space[] = {
+	{
+		.pa_start	= OMAP3_UART1_BASE,
+		.pa_end		= OMAP3_UART1_BASE + SZ_8K - 1,
+		.flags		= ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if omap3_l4_core__uart1 = {
+	.master		= &omap3xxx_l4_core_hwmod,
+	.slave		= &omap3xxx_uart1_hwmod,
+	.clk		= "uart1_ick",
+	.addr		= omap3xxx_uart1_addr_space,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* L4 CORE -> UART2 interface */
+static struct omap_hwmod_addr_space omap3xxx_uart2_addr_space[] = {
+	{
+		.pa_start	= OMAP3_UART2_BASE,
+		.pa_end		= OMAP3_UART2_BASE + SZ_1K - 1,
+		.flags		= ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if omap3_l4_core__uart2 = {
+	.master		= &omap3xxx_l4_core_hwmod,
+	.slave		= &omap3xxx_uart2_hwmod,
+	.clk		= "uart2_ick",
+	.addr		= omap3xxx_uart2_addr_space,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* L4 PER -> UART3 interface */
+static struct omap_hwmod_addr_space omap3xxx_uart3_addr_space[] = {
+	{
+		.pa_start	= OMAP3_UART3_BASE,
+		.pa_end		= OMAP3_UART3_BASE + SZ_1K - 1,
+		.flags		= ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if omap3_l4_per__uart3 = {
+	.master		= &omap3xxx_l4_per_hwmod,
+	.slave		= &omap3xxx_uart3_hwmod,
+	.clk		= "uart3_ick",
+	.addr		= omap3xxx_uart3_addr_space,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* L4 PER -> UART4 interface */
+static struct omap_hwmod_addr_space omap36xx_uart4_addr_space[] = {
+	{
+		.pa_start	= OMAP3_UART4_BASE,
+		.pa_end		= OMAP3_UART4_BASE + SZ_1K - 1,
+		.flags		= ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if omap36xx_l4_per__uart4 = {
+	.master		= &omap3xxx_l4_per_hwmod,
+	.slave		= &omap36xx_uart4_hwmod,
+	.clk		= "uart4_ick",
+	.addr		= omap36xx_uart4_addr_space,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* AM35xx: L4 CORE -> UART4 interface */
+static struct omap_hwmod_addr_space am35xx_uart4_addr_space[] = {
+	{
+		.pa_start	= OMAP3_UART4_AM35XX_BASE,
+		.pa_end		= OMAP3_UART4_AM35XX_BASE + SZ_1K - 1,
+		.flags		= ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
+	},
+};
+
+static struct omap_hwmod_ocp_if am35xx_l4_core__uart4 = {
+	.master		= &omap3xxx_l4_core_hwmod,
+	.slave		= &am35xx_uart4_hwmod,
+	.clk		= "uart4_ick",
+	.addr		= am35xx_uart4_addr_space,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* L4 CORE -> I2C1 interface */
+static struct omap_hwmod_ocp_if omap3_l4_core__i2c1 = {
+	.master		= &omap3xxx_l4_core_hwmod,
+	.slave		= &omap3xxx_i2c1_hwmod,
+	.clk		= "i2c1_ick",
+	.addr		= omap2_i2c1_addr_space,
+	.fw = {
+		.omap2 = {
+			.l4_fw_region  = OMAP3_L4_CORE_FW_I2C1_REGION,
+			.l4_prot_group = 7,
+			.flags	= OMAP_FIREWALL_L4,
+		}
+	},
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* L4 CORE -> I2C2 interface */
+static struct omap_hwmod_ocp_if omap3_l4_core__i2c2 = {
+	.master		= &omap3xxx_l4_core_hwmod,
+	.slave		= &omap3xxx_i2c2_hwmod,
+	.clk		= "i2c2_ick",
+	.addr		= omap2_i2c2_addr_space,
+	.fw = {
+		.omap2 = {
+			.l4_fw_region  = OMAP3_L4_CORE_FW_I2C2_REGION,
+			.l4_prot_group = 7,
+			.flags = OMAP_FIREWALL_L4,
+		}
+	},
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* L4 CORE -> I2C3 interface */
+static struct omap_hwmod_addr_space omap3xxx_i2c3_addr_space[] = {
+	{
+		.pa_start	= 0x48060000,
+		.pa_end		= 0x48060000 + SZ_128 - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if omap3_l4_core__i2c3 = {
+	.master		= &omap3xxx_l4_core_hwmod,
+	.slave		= &omap3xxx_i2c3_hwmod,
+	.clk		= "i2c3_ick",
+	.addr		= omap3xxx_i2c3_addr_space,
+	.fw = {
+		.omap2 = {
+			.l4_fw_region  = OMAP3_L4_CORE_FW_I2C3_REGION,
+			.l4_prot_group = 7,
+			.flags = OMAP_FIREWALL_L4,
+		}
+	},
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* L4 CORE -> SR1 interface */
+static struct omap_hwmod_addr_space omap3_sr1_addr_space[] = {
+	{
+		.pa_start	= OMAP34XX_SR1_BASE,
+		.pa_end		= OMAP34XX_SR1_BASE + SZ_1K - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if omap34xx_l4_core__sr1 = {
+	.master		= &omap3xxx_l4_core_hwmod,
+	.slave		= &omap34xx_sr1_hwmod,
+	.clk		= "sr_l4_ick",
+	.addr		= omap3_sr1_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if omap36xx_l4_core__sr1 = {
+	.master		= &omap3xxx_l4_core_hwmod,
+	.slave		= &omap36xx_sr1_hwmod,
+	.clk		= "sr_l4_ick",
+	.addr		= omap3_sr1_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+/* L4 CORE -> SR1 interface */
+static struct omap_hwmod_addr_space omap3_sr2_addr_space[] = {
+	{
+		.pa_start	= OMAP34XX_SR2_BASE,
+		.pa_end		= OMAP34XX_SR2_BASE + SZ_1K - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if omap34xx_l4_core__sr2 = {
+	.master		= &omap3xxx_l4_core_hwmod,
+	.slave		= &omap34xx_sr2_hwmod,
+	.clk		= "sr_l4_ick",
+	.addr		= omap3_sr2_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if omap36xx_l4_core__sr2 = {
+	.master		= &omap3xxx_l4_core_hwmod,
+	.slave		= &omap36xx_sr2_hwmod,
+	.clk		= "sr_l4_ick",
+	.addr		= omap3_sr2_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space omap3xxx_usbhsotg_addrs[] = {
+	{
+		.pa_start	= OMAP34XX_HSUSB_OTG_BASE,
+		.pa_end		= OMAP34XX_HSUSB_OTG_BASE + SZ_4K - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_core -> usbhsotg  */
+static struct omap_hwmod_ocp_if omap3xxx_l4_core__usbhsotg = {
+	.master		= &omap3xxx_l4_core_hwmod,
+	.slave		= &omap3xxx_usbhsotg_hwmod,
+	.clk		= "l4_ick",
+	.addr		= omap3xxx_usbhsotg_addrs,
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space am35xx_usbhsotg_addrs[] = {
+	{
+		.pa_start	= AM35XX_IPSS_USBOTGSS_BASE,
+		.pa_end		= AM35XX_IPSS_USBOTGSS_BASE + SZ_4K - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_core -> usbhsotg  */
+static struct omap_hwmod_ocp_if am35xx_l4_core__usbhsotg = {
+	.master		= &omap3xxx_l4_core_hwmod,
+	.slave		= &am35xx_usbhsotg_hwmod,
+	.clk		= "l4_ick",
+	.addr		= am35xx_usbhsotg_addrs,
+	.user		= OCP_USER_MPU,
+};
+
+/* L4_WKUP -> L4_SEC interface */
+static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__l4_sec = {
+	.master = &omap3xxx_l4_wkup_hwmod,
+	.slave	= &omap3xxx_l4_sec_hwmod,
+	.user	= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* IVA2 <- L3 interface */
+static struct omap_hwmod_ocp_if omap3xxx_l3__iva = {
+	.master		= &omap3xxx_l3_main_hwmod,
+	.slave		= &omap3xxx_iva_hwmod,
+	.clk		= "core_l3_ick",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap3xxx_timer1_addrs[] = {
+	{
+		.pa_start	= 0x48318000,
+		.pa_end		= 0x48318000 + SZ_1K - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_wkup -> timer1 */
+static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__timer1 = {
+	.master		= &omap3xxx_l4_wkup_hwmod,
+	.slave		= &omap3xxx_timer1_hwmod,
+	.clk		= "gpt1_ick",
+	.addr		= omap3xxx_timer1_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap3xxx_timer2_addrs[] = {
+	{
+		.pa_start	= 0x49032000,
+		.pa_end		= 0x49032000 + SZ_1K - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_per -> timer2 */
+static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer2 = {
+	.master		= &omap3xxx_l4_per_hwmod,
+	.slave		= &omap3xxx_timer2_hwmod,
+	.clk		= "gpt2_ick",
+	.addr		= omap3xxx_timer2_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap3xxx_timer3_addrs[] = {
+	{
+		.pa_start	= 0x49034000,
+		.pa_end		= 0x49034000 + SZ_1K - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_per -> timer3 */
+static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer3 = {
+	.master		= &omap3xxx_l4_per_hwmod,
+	.slave		= &omap3xxx_timer3_hwmod,
+	.clk		= "gpt3_ick",
+	.addr		= omap3xxx_timer3_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap3xxx_timer4_addrs[] = {
+	{
+		.pa_start	= 0x49036000,
+		.pa_end		= 0x49036000 + SZ_1K - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_per -> timer4 */
+static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer4 = {
+	.master		= &omap3xxx_l4_per_hwmod,
+	.slave		= &omap3xxx_timer4_hwmod,
+	.clk		= "gpt4_ick",
+	.addr		= omap3xxx_timer4_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap3xxx_timer5_addrs[] = {
+	{
+		.pa_start	= 0x49038000,
+		.pa_end		= 0x49038000 + SZ_1K - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_per -> timer5 */
+static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer5 = {
+	.master		= &omap3xxx_l4_per_hwmod,
+	.slave		= &omap3xxx_timer5_hwmod,
+	.clk		= "gpt5_ick",
+	.addr		= omap3xxx_timer5_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap3xxx_timer6_addrs[] = {
+	{
+		.pa_start	= 0x4903A000,
+		.pa_end		= 0x4903A000 + SZ_1K - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_per -> timer6 */
+static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer6 = {
+	.master		= &omap3xxx_l4_per_hwmod,
+	.slave		= &omap3xxx_timer6_hwmod,
+	.clk		= "gpt6_ick",
+	.addr		= omap3xxx_timer6_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap3xxx_timer7_addrs[] = {
+	{
+		.pa_start	= 0x4903C000,
+		.pa_end		= 0x4903C000 + SZ_1K - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_per -> timer7 */
+static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer7 = {
+	.master		= &omap3xxx_l4_per_hwmod,
+	.slave		= &omap3xxx_timer7_hwmod,
+	.clk		= "gpt7_ick",
+	.addr		= omap3xxx_timer7_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap3xxx_timer8_addrs[] = {
+	{
+		.pa_start	= 0x4903E000,
+		.pa_end		= 0x4903E000 + SZ_1K - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_per -> timer8 */
+static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer8 = {
+	.master		= &omap3xxx_l4_per_hwmod,
+	.slave		= &omap3xxx_timer8_hwmod,
+	.clk		= "gpt8_ick",
+	.addr		= omap3xxx_timer8_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap3xxx_timer9_addrs[] = {
+	{
+		.pa_start	= 0x49040000,
+		.pa_end		= 0x49040000 + SZ_1K - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_per -> timer9 */
+static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer9 = {
+	.master		= &omap3xxx_l4_per_hwmod,
+	.slave		= &omap3xxx_timer9_hwmod,
+	.clk		= "gpt9_ick",
+	.addr		= omap3xxx_timer9_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_core -> timer10 */
+static struct omap_hwmod_ocp_if omap3xxx_l4_core__timer10 = {
+	.master		= &omap3xxx_l4_core_hwmod,
+	.slave		= &omap3xxx_timer10_hwmod,
+	.clk		= "gpt10_ick",
+	.addr		= omap2_timer10_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_core -> timer11 */
+static struct omap_hwmod_ocp_if omap3xxx_l4_core__timer11 = {
+	.master		= &omap3xxx_l4_core_hwmod,
+	.slave		= &omap3xxx_timer11_hwmod,
+	.clk		= "gpt11_ick",
+	.addr		= omap2_timer11_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap3xxx_timer12_addrs[] = {
+	{
+		.pa_start	= 0x48304000,
+		.pa_end		= 0x48304000 + SZ_1K - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_core -> timer12 */
+static struct omap_hwmod_ocp_if omap3xxx_l4_sec__timer12 = {
+	.master		= &omap3xxx_l4_sec_hwmod,
+	.slave		= &omap3xxx_timer12_hwmod,
+	.clk		= "gpt12_ick",
+	.addr		= omap3xxx_timer12_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_wkup -> wd_timer2 */
+static struct omap_hwmod_addr_space omap3xxx_wd_timer2_addrs[] = {
+	{
+		.pa_start	= 0x48314000,
+		.pa_end		= 0x4831407f,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__wd_timer2 = {
+	.master		= &omap3xxx_l4_wkup_hwmod,
+	.slave		= &omap3xxx_wd_timer2_hwmod,
+	.clk		= "wdt2_ick",
+	.addr		= omap3xxx_wd_timer2_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_core -> dss */
+static struct omap_hwmod_ocp_if omap3430es1_l4_core__dss = {
+	.master		= &omap3xxx_l4_core_hwmod,
+	.slave		= &omap3430es1_dss_core_hwmod,
+	.clk		= "dss_ick",
+	.addr		= omap2_dss_addrs,
+	.fw = {
+		.omap2 = {
+			.l4_fw_region  = OMAP3ES1_L4_CORE_FW_DSS_CORE_REGION,
+			.l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP,
+			.flags	= OMAP_FIREWALL_L4,
+		}
+	},
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss = {
+	.master		= &omap3xxx_l4_core_hwmod,
+	.slave		= &omap3xxx_dss_core_hwmod,
+	.clk		= "dss_ick",
+	.addr		= omap2_dss_addrs,
+	.fw = {
+		.omap2 = {
+			.l4_fw_region  = OMAP3_L4_CORE_FW_DSS_CORE_REGION,
+			.l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP,
+			.flags	= OMAP_FIREWALL_L4,
+		}
+	},
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_core -> dss_dispc */
+static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_dispc = {
+	.master		= &omap3xxx_l4_core_hwmod,
+	.slave		= &omap3xxx_dss_dispc_hwmod,
+	.clk		= "dss_ick",
+	.addr		= omap2_dss_dispc_addrs,
+	.fw = {
+		.omap2 = {
+			.l4_fw_region  = OMAP3_L4_CORE_FW_DSS_DISPC_REGION,
+			.l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP,
+			.flags	= OMAP_FIREWALL_L4,
+		}
+	},
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap3xxx_dss_dsi1_addrs[] = {
+	{
+		.pa_start	= 0x4804FC00,
+		.pa_end		= 0x4804FFFF,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_core -> dss_dsi1 */
+static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_dsi1 = {
+	.master		= &omap3xxx_l4_core_hwmod,
+	.slave		= &omap3xxx_dss_dsi1_hwmod,
+	.clk		= "dss_ick",
+	.addr		= omap3xxx_dss_dsi1_addrs,
+	.fw = {
+		.omap2 = {
+			.l4_fw_region  = OMAP3_L4_CORE_FW_DSS_DSI_REGION,
+			.l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP,
+			.flags	= OMAP_FIREWALL_L4,
+		}
+	},
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_core -> dss_rfbi */
+static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_rfbi = {
+	.master		= &omap3xxx_l4_core_hwmod,
+	.slave		= &omap3xxx_dss_rfbi_hwmod,
+	.clk		= "dss_ick",
+	.addr		= omap2_dss_rfbi_addrs,
+	.fw = {
+		.omap2 = {
+			.l4_fw_region  = OMAP3_L4_CORE_FW_DSS_RFBI_REGION,
+			.l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP ,
+			.flags	= OMAP_FIREWALL_L4,
+		}
+	},
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_core -> dss_venc */
+static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_venc = {
+	.master		= &omap3xxx_l4_core_hwmod,
+	.slave		= &omap3xxx_dss_venc_hwmod,
+	.clk		= "dss_ick",
+	.addr		= omap2_dss_venc_addrs,
+	.fw = {
+		.omap2 = {
+			.l4_fw_region  = OMAP3_L4_CORE_FW_DSS_VENC_REGION,
+			.l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP,
+			.flags	= OMAP_FIREWALL_L4,
+		}
+	},
+	.flags		= OCPIF_SWSUP_IDLE,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_wkup -> gpio1 */
+static struct omap_hwmod_addr_space omap3xxx_gpio1_addrs[] = {
+	{
+		.pa_start	= 0x48310000,
+		.pa_end		= 0x483101ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__gpio1 = {
+	.master		= &omap3xxx_l4_wkup_hwmod,
+	.slave		= &omap3xxx_gpio1_hwmod,
+	.addr		= omap3xxx_gpio1_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per -> gpio2 */
+static struct omap_hwmod_addr_space omap3xxx_gpio2_addrs[] = {
+	{
+		.pa_start	= 0x49050000,
+		.pa_end		= 0x490501ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio2 = {
+	.master		= &omap3xxx_l4_per_hwmod,
+	.slave		= &omap3xxx_gpio2_hwmod,
+	.addr		= omap3xxx_gpio2_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per -> gpio3 */
+static struct omap_hwmod_addr_space omap3xxx_gpio3_addrs[] = {
+	{
+		.pa_start	= 0x49052000,
+		.pa_end		= 0x490521ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio3 = {
+	.master		= &omap3xxx_l4_per_hwmod,
+	.slave		= &omap3xxx_gpio3_hwmod,
+	.addr		= omap3xxx_gpio3_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per -> gpio4 */
+static struct omap_hwmod_addr_space omap3xxx_gpio4_addrs[] = {
+	{
+		.pa_start	= 0x49054000,
+		.pa_end		= 0x490541ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio4 = {
+	.master		= &omap3xxx_l4_per_hwmod,
+	.slave		= &omap3xxx_gpio4_hwmod,
+	.addr		= omap3xxx_gpio4_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per -> gpio5 */
+static struct omap_hwmod_addr_space omap3xxx_gpio5_addrs[] = {
+	{
+		.pa_start	= 0x49056000,
+		.pa_end		= 0x490561ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio5 = {
+	.master		= &omap3xxx_l4_per_hwmod,
+	.slave		= &omap3xxx_gpio5_hwmod,
+	.addr		= omap3xxx_gpio5_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per -> gpio6 */
+static struct omap_hwmod_addr_space omap3xxx_gpio6_addrs[] = {
+	{
+		.pa_start	= 0x49058000,
+		.pa_end		= 0x490581ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio6 = {
+	.master		= &omap3xxx_l4_per_hwmod,
+	.slave		= &omap3xxx_gpio6_hwmod,
+	.addr		= omap3xxx_gpio6_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* dma_system -> L3 */
+static struct omap_hwmod_ocp_if omap3xxx_dma_system__l3 = {
+	.master		= &omap3xxx_dma_system_hwmod,
+	.slave		= &omap3xxx_l3_main_hwmod,
+	.clk		= "core_l3_ick",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap3xxx_dma_system_addrs[] = {
+	{
+		.pa_start	= 0x48056000,
+		.pa_end		= 0x48056fff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_cfg -> dma_system */
+static struct omap_hwmod_ocp_if omap3xxx_l4_core__dma_system = {
+	.master		= &omap3xxx_l4_core_hwmod,
+	.slave		= &omap3xxx_dma_system_hwmod,
+	.clk		= "core_l4_ick",
+	.addr		= omap3xxx_dma_system_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap3xxx_mcbsp1_addrs[] = {
+	{
+		.name		= "mpu",
+		.pa_start	= 0x48074000,
+		.pa_end		= 0x480740ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_core -> mcbsp1 */
+static struct omap_hwmod_ocp_if omap3xxx_l4_core__mcbsp1 = {
+	.master		= &omap3xxx_l4_core_hwmod,
+	.slave		= &omap3xxx_mcbsp1_hwmod,
+	.clk		= "mcbsp1_ick",
+	.addr		= omap3xxx_mcbsp1_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap3xxx_mcbsp2_addrs[] = {
+	{
+		.name		= "mpu",
+		.pa_start	= 0x49022000,
+		.pa_end		= 0x490220ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_per -> mcbsp2 */
+static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp2 = {
+	.master		= &omap3xxx_l4_per_hwmod,
+	.slave		= &omap3xxx_mcbsp2_hwmod,
+	.clk		= "mcbsp2_ick",
+	.addr		= omap3xxx_mcbsp2_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap3xxx_mcbsp3_addrs[] = {
+	{
+		.name		= "mpu",
+		.pa_start	= 0x49024000,
+		.pa_end		= 0x490240ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_per -> mcbsp3 */
+static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp3 = {
+	.master		= &omap3xxx_l4_per_hwmod,
+	.slave		= &omap3xxx_mcbsp3_hwmod,
+	.clk		= "mcbsp3_ick",
+	.addr		= omap3xxx_mcbsp3_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap3xxx_mcbsp4_addrs[] = {
+	{
+		.name		= "mpu",
+		.pa_start	= 0x49026000,
+		.pa_end		= 0x490260ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_per -> mcbsp4 */
+static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp4 = {
+	.master		= &omap3xxx_l4_per_hwmod,
+	.slave		= &omap3xxx_mcbsp4_hwmod,
+	.clk		= "mcbsp4_ick",
+	.addr		= omap3xxx_mcbsp4_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap3xxx_mcbsp5_addrs[] = {
+	{
+		.name		= "mpu",
+		.pa_start	= 0x48096000,
+		.pa_end		= 0x480960ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_core -> mcbsp5 */
+static struct omap_hwmod_ocp_if omap3xxx_l4_core__mcbsp5 = {
+	.master		= &omap3xxx_l4_core_hwmod,
+	.slave		= &omap3xxx_mcbsp5_hwmod,
+	.clk		= "mcbsp5_ick",
+	.addr		= omap3xxx_mcbsp5_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap3xxx_mcbsp2_sidetone_addrs[] = {
+	{
+		.name		= "sidetone",
+		.pa_start	= 0x49028000,
+		.pa_end		= 0x490280ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_per -> mcbsp2_sidetone */
+static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp2_sidetone = {
+	.master		= &omap3xxx_l4_per_hwmod,
+	.slave		= &omap3xxx_mcbsp2_sidetone_hwmod,
+	.clk		= "mcbsp2_ick",
+	.addr		= omap3xxx_mcbsp2_sidetone_addrs,
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space omap3xxx_mcbsp3_sidetone_addrs[] = {
+	{
+		.name		= "sidetone",
+		.pa_start	= 0x4902A000,
+		.pa_end		= 0x4902A0ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_per -> mcbsp3_sidetone */
+static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp3_sidetone = {
+	.master		= &omap3xxx_l4_per_hwmod,
+	.slave		= &omap3xxx_mcbsp3_sidetone_hwmod,
+	.clk		= "mcbsp3_ick",
+	.addr		= omap3xxx_mcbsp3_sidetone_addrs,
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space omap3xxx_mailbox_addrs[] = {
+	{
+		.pa_start	= 0x48094000,
+		.pa_end		= 0x480941ff,
+		.flags		= ADDR_TYPE_RT,
+	},
+	{ }
+};
+
+/* l4_core -> mailbox */
+static struct omap_hwmod_ocp_if omap3xxx_l4_core__mailbox = {
+	.master		= &omap3xxx_l4_core_hwmod,
+	.slave		= &omap3xxx_mailbox_hwmod,
+	.addr		= omap3xxx_mailbox_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4 core -> mcspi1 interface */
+static struct omap_hwmod_ocp_if omap34xx_l4_core__mcspi1 = {
+	.master		= &omap3xxx_l4_core_hwmod,
+	.slave		= &omap34xx_mcspi1,
+	.clk		= "mcspi1_ick",
+	.addr		= omap2_mcspi1_addr_space,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4 core -> mcspi2 interface */
+static struct omap_hwmod_ocp_if omap34xx_l4_core__mcspi2 = {
+	.master		= &omap3xxx_l4_core_hwmod,
+	.slave		= &omap34xx_mcspi2,
+	.clk		= "mcspi2_ick",
+	.addr		= omap2_mcspi2_addr_space,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4 core -> mcspi3 interface */
+static struct omap_hwmod_ocp_if omap34xx_l4_core__mcspi3 = {
+	.master		= &omap3xxx_l4_core_hwmod,
+	.slave		= &omap34xx_mcspi3,
+	.clk		= "mcspi3_ick",
+	.addr		= omap2430_mcspi3_addr_space,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4 core -> mcspi4 interface */
+static struct omap_hwmod_addr_space omap34xx_mcspi4_addr_space[] = {
+	{
+		.pa_start	= 0x480ba000,
+		.pa_end		= 0x480ba0ff,
+		.flags		= ADDR_TYPE_RT,
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if omap34xx_l4_core__mcspi4 = {
+	.master		= &omap3xxx_l4_core_hwmod,
+	.slave		= &omap34xx_mcspi4,
+	.clk		= "mcspi4_ick",
+	.addr		= omap34xx_mcspi4_addr_space,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if omap3xxx_usb_host_hs__l3_main_2 = {
+	.master		= &omap3xxx_usb_host_hs_hwmod,
+	.slave		= &omap3xxx_l3_main_hwmod,
+	.clk		= "core_l3_ick",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space omap3xxx_usb_host_hs_addrs[] = {
+	{
+		.name		= "uhh",
+		.pa_start	= 0x48064000,
+		.pa_end		= 0x480643ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{
+		.name		= "ohci",
+		.pa_start	= 0x48064400,
+		.pa_end		= 0x480647ff,
+	},
+	{
+		.name		= "ehci",
+		.pa_start	= 0x48064800,
+		.pa_end		= 0x48064cff,
+	},
+	{}
+};
+
+static struct omap_hwmod_ocp_if omap3xxx_l4_core__usb_host_hs = {
+	.master		= &omap3xxx_l4_core_hwmod,
+	.slave		= &omap3xxx_usb_host_hs_hwmod,
+	.clk		= "usbhost_ick",
+	.addr		= omap3xxx_usb_host_hs_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
 static struct omap_hwmod_addr_space omap3xxx_usb_tll_hs_addrs[] = {
 	{
 		.name		= "tll",
@@ -3520,183 +3110,187 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__usb_tll_hs = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-static struct omap_hwmod_ocp_if *omap3xxx_usb_tll_hs_slaves[] = {
-	&omap3xxx_l4_core__usb_tll_hs,
+/* l4_core -> hdq1w interface */
+static struct omap_hwmod_ocp_if omap3xxx_l4_core__hdq1w = {
+	.master		= &omap3xxx_l4_core_hwmod,
+	.slave		= &omap3xxx_hdq1w_hwmod,
+	.clk		= "hdq_ick",
+	.addr		= omap2_hdq1w_addr_space,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+	.flags		= OMAP_FIREWALL_L4 | OCPIF_SWSUP_IDLE,
 };
 
-static struct omap_hwmod omap3xxx_usb_tll_hs_hwmod = {
-	.name		= "usb_tll_hs",
-	.class		= &omap3xxx_usb_tll_hs_hwmod_class,
-	.clkdm_name	= "l3_init_clkdm",
-	.mpu_irqs	= omap3xxx_usb_tll_hs_irqs,
-	.main_clk	= "usbtll_fck",
-	.prcm = {
-		.omap2 = {
-			.module_offs = CORE_MOD,
-			.prcm_reg_id = 3,
-			.module_bit = OMAP3430ES2_EN_USBTLL_SHIFT,
-			.idlest_reg_id = 3,
-			.idlest_idle_bit = OMAP3430ES2_ST_USBTLL_SHIFT,
-		},
+/* l4_wkup -> 32ksync_counter */
+static struct omap_hwmod_addr_space omap3xxx_counter_32k_addrs[] = {
+	{
+		.pa_start	= 0x48320000,
+		.pa_end		= 0x4832001f,
+		.flags		= ADDR_TYPE_RT
 	},
-	.slaves		= omap3xxx_usb_tll_hs_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_usb_tll_hs_slaves),
-};
-
-static __initdata struct omap_hwmod *omap3xxx_hwmods[] = {
-	&omap3xxx_l3_main_hwmod,
-	&omap3xxx_l4_core_hwmod,
-	&omap3xxx_l4_per_hwmod,
-	&omap3xxx_l4_wkup_hwmod,
-	&omap3xxx_mmc3_hwmod,
-	&omap3xxx_mpu_hwmod,
-
-	&omap3xxx_timer1_hwmod,
-	&omap3xxx_timer2_hwmod,
-	&omap3xxx_timer3_hwmod,
-	&omap3xxx_timer4_hwmod,
-	&omap3xxx_timer5_hwmod,
-	&omap3xxx_timer6_hwmod,
-	&omap3xxx_timer7_hwmod,
-	&omap3xxx_timer8_hwmod,
-	&omap3xxx_timer9_hwmod,
-	&omap3xxx_timer10_hwmod,
-	&omap3xxx_timer11_hwmod,
-
-	&omap3xxx_wd_timer2_hwmod,
-	&omap3xxx_uart1_hwmod,
-	&omap3xxx_uart2_hwmod,
-	&omap3xxx_uart3_hwmod,
-
-	/* i2c class */
-	&omap3xxx_i2c1_hwmod,
-	&omap3xxx_i2c2_hwmod,
-	&omap3xxx_i2c3_hwmod,
-
-	/* gpio class */
-	&omap3xxx_gpio1_hwmod,
-	&omap3xxx_gpio2_hwmod,
-	&omap3xxx_gpio3_hwmod,
-	&omap3xxx_gpio4_hwmod,
-	&omap3xxx_gpio5_hwmod,
-	&omap3xxx_gpio6_hwmod,
-
-	/* dma_system class*/
-	&omap3xxx_dma_system_hwmod,
-
-	/* mcbsp class */
-	&omap3xxx_mcbsp1_hwmod,
-	&omap3xxx_mcbsp2_hwmod,
-	&omap3xxx_mcbsp3_hwmod,
-	&omap3xxx_mcbsp4_hwmod,
-	&omap3xxx_mcbsp5_hwmod,
-	&omap3xxx_mcbsp2_sidetone_hwmod,
-	&omap3xxx_mcbsp3_sidetone_hwmod,
-
-
-	/* mcspi class */
-	&omap34xx_mcspi1,
-	&omap34xx_mcspi2,
-	&omap34xx_mcspi3,
-	&omap34xx_mcspi4,
+	{ }
+};
 
+static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__counter_32k = {
+	.master		= &omap3xxx_l4_wkup_hwmod,
+	.slave		= &omap3xxx_counter_32k_hwmod,
+	.clk		= "omap_32ksync_ick",
+	.addr		= omap3xxx_counter_32k_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if *omap3xxx_hwmod_ocp_ifs[] __initdata = {
+	&omap3xxx_l3_main__l4_core,
+	&omap3xxx_l3_main__l4_per,
+	&omap3xxx_mpu__l3_main,
+	&omap3xxx_l4_core__l4_wkup,
+	&omap3xxx_l4_core__mmc3,
+	&omap3_l4_core__uart1,
+	&omap3_l4_core__uart2,
+	&omap3_l4_per__uart3,
+	&omap3_l4_core__i2c1,
+	&omap3_l4_core__i2c2,
+	&omap3_l4_core__i2c3,
+	&omap3xxx_l4_wkup__l4_sec,
+	&omap3xxx_l4_wkup__timer1,
+	&omap3xxx_l4_per__timer2,
+	&omap3xxx_l4_per__timer3,
+	&omap3xxx_l4_per__timer4,
+	&omap3xxx_l4_per__timer5,
+	&omap3xxx_l4_per__timer6,
+	&omap3xxx_l4_per__timer7,
+	&omap3xxx_l4_per__timer8,
+	&omap3xxx_l4_per__timer9,
+	&omap3xxx_l4_core__timer10,
+	&omap3xxx_l4_core__timer11,
+	&omap3xxx_l4_wkup__wd_timer2,
+	&omap3xxx_l4_wkup__gpio1,
+	&omap3xxx_l4_per__gpio2,
+	&omap3xxx_l4_per__gpio3,
+	&omap3xxx_l4_per__gpio4,
+	&omap3xxx_l4_per__gpio5,
+	&omap3xxx_l4_per__gpio6,
+	&omap3xxx_dma_system__l3,
+	&omap3xxx_l4_core__dma_system,
+	&omap3xxx_l4_core__mcbsp1,
+	&omap3xxx_l4_per__mcbsp2,
+	&omap3xxx_l4_per__mcbsp3,
+	&omap3xxx_l4_per__mcbsp4,
+	&omap3xxx_l4_core__mcbsp5,
+	&omap3xxx_l4_per__mcbsp2_sidetone,
+	&omap3xxx_l4_per__mcbsp3_sidetone,
+	&omap34xx_l4_core__mcspi1,
+	&omap34xx_l4_core__mcspi2,
+	&omap34xx_l4_core__mcspi3,
+	&omap34xx_l4_core__mcspi4,
+	&omap3xxx_l4_wkup__counter_32k,
 	NULL,
 };
 
-/* GP-only hwmods */
-static __initdata struct omap_hwmod *omap3xxx_gp_hwmods[] = {
-	&omap3xxx_timer12_hwmod,
+/* GP-only hwmod links */
+static struct omap_hwmod_ocp_if *omap3xxx_gp_hwmod_ocp_ifs[] __initdata = {
+	&omap3xxx_l4_sec__timer12,
 	NULL
 };
 
-/* 3430ES1-only hwmods */
-static __initdata struct omap_hwmod *omap3430es1_hwmods[] = {
-	&omap3430es1_dss_core_hwmod,
+/* 3430ES1-only hwmod links */
+static struct omap_hwmod_ocp_if *omap3430es1_hwmod_ocp_ifs[] __initdata = {
+	&omap3430es1_dss__l3,
+	&omap3430es1_l4_core__dss,
 	NULL
 };
 
-/* 3430ES2+-only hwmods */
-static __initdata struct omap_hwmod *omap3430es2plus_hwmods[] = {
-	&omap3xxx_dss_core_hwmod,
-	&omap3xxx_usbhsotg_hwmod,
-	&omap3xxx_usb_host_hs_hwmod,
-	&omap3xxx_usb_tll_hs_hwmod,
+/* 3430ES2+-only hwmod links */
+static struct omap_hwmod_ocp_if *omap3430es2plus_hwmod_ocp_ifs[] __initdata = {
+	&omap3xxx_dss__l3,
+	&omap3xxx_l4_core__dss,
+	&omap3xxx_usbhsotg__l3,
+	&omap3xxx_l4_core__usbhsotg,
+	&omap3xxx_usb_host_hs__l3_main_2,
+	&omap3xxx_l4_core__usb_host_hs,
+	&omap3xxx_l4_core__usb_tll_hs,
 	NULL
 };
 
-/* <= 3430ES3-only hwmods */
-static struct omap_hwmod *omap3430_pre_es3_hwmods[] __initdata = {
-	&omap3xxx_pre_es3_mmc1_hwmod,
-	&omap3xxx_pre_es3_mmc2_hwmod,
+/* <= 3430ES3-only hwmod links */
+static struct omap_hwmod_ocp_if *omap3430_pre_es3_hwmod_ocp_ifs[] __initdata = {
+	&omap3xxx_l4_core__pre_es3_mmc1,
+	&omap3xxx_l4_core__pre_es3_mmc2,
 	NULL
 };
 
-/* 3430ES3+-only hwmods */
-static struct omap_hwmod *omap3430_es3plus_hwmods[] __initdata = {
-	&omap3xxx_es3plus_mmc1_hwmod,
-	&omap3xxx_es3plus_mmc2_hwmod,
+/* 3430ES3+-only hwmod links */
+static struct omap_hwmod_ocp_if *omap3430_es3plus_hwmod_ocp_ifs[] __initdata = {
+	&omap3xxx_l4_core__es3plus_mmc1,
+	&omap3xxx_l4_core__es3plus_mmc2,
 	NULL
 };
 
-/* 34xx-only hwmods (all ES revisions) */
-static __initdata struct omap_hwmod *omap34xx_hwmods[] = {
-	&omap3xxx_iva_hwmod,
-	&omap34xx_sr1_hwmod,
-	&omap34xx_sr2_hwmod,
-	&omap3xxx_mailbox_hwmod,
+/* 34xx-only hwmod links (all ES revisions) */
+static struct omap_hwmod_ocp_if *omap34xx_hwmod_ocp_ifs[] __initdata = {
+	&omap3xxx_l3__iva,
+	&omap34xx_l4_core__sr1,
+	&omap34xx_l4_core__sr2,
+	&omap3xxx_l4_core__mailbox,
+	&omap3xxx_l4_core__hdq1w,
 	NULL
 };
 
-/* 36xx-only hwmods (all ES revisions) */
-static __initdata struct omap_hwmod *omap36xx_hwmods[] = {
-	&omap3xxx_iva_hwmod,
-	&omap3xxx_uart4_hwmod,
-	&omap3xxx_dss_core_hwmod,
-	&omap36xx_sr1_hwmod,
-	&omap36xx_sr2_hwmod,
-	&omap3xxx_usbhsotg_hwmod,
-	&omap3xxx_mailbox_hwmod,
-	&omap3xxx_usb_host_hs_hwmod,
-	&omap3xxx_usb_tll_hs_hwmod,
-	&omap3xxx_es3plus_mmc1_hwmod,
-	&omap3xxx_es3plus_mmc2_hwmod,
+/* 36xx-only hwmod links (all ES revisions) */
+static struct omap_hwmod_ocp_if *omap36xx_hwmod_ocp_ifs[] __initdata = {
+	&omap3xxx_l3__iva,
+	&omap36xx_l4_per__uart4,
+	&omap3xxx_dss__l3,
+	&omap3xxx_l4_core__dss,
+	&omap36xx_l4_core__sr1,
+	&omap36xx_l4_core__sr2,
+	&omap3xxx_usbhsotg__l3,
+	&omap3xxx_l4_core__usbhsotg,
+	&omap3xxx_l4_core__mailbox,
+	&omap3xxx_usb_host_hs__l3_main_2,
+	&omap3xxx_l4_core__usb_host_hs,
+	&omap3xxx_l4_core__usb_tll_hs,
+	&omap3xxx_l4_core__es3plus_mmc1,
+	&omap3xxx_l4_core__es3plus_mmc2,
+	&omap3xxx_l4_core__hdq1w,
 	NULL
 };
 
-static __initdata struct omap_hwmod *am35xx_hwmods[] = {
-	&omap3xxx_dss_core_hwmod, /* XXX ??? */
-	&am35xx_usbhsotg_hwmod,
-	&am35xx_uart4_hwmod,
-	&omap3xxx_usb_host_hs_hwmod,
-	&omap3xxx_usb_tll_hs_hwmod,
-	&omap3xxx_es3plus_mmc1_hwmod,
-	&omap3xxx_es3plus_mmc2_hwmod,
+static struct omap_hwmod_ocp_if *am35xx_hwmod_ocp_ifs[] __initdata = {
+	&omap3xxx_dss__l3,
+	&omap3xxx_l4_core__dss,
+	&am35xx_usbhsotg__l3,
+	&am35xx_l4_core__usbhsotg,
+	&am35xx_l4_core__uart4,
+	&omap3xxx_usb_host_hs__l3_main_2,
+	&omap3xxx_l4_core__usb_host_hs,
+	&omap3xxx_l4_core__usb_tll_hs,
+	&omap3xxx_l4_core__es3plus_mmc1,
+	&omap3xxx_l4_core__es3plus_mmc2,
 	NULL
 };
 
-static __initdata struct omap_hwmod *omap3xxx_dss_hwmods[] = {
-	/* dss class */
-	&omap3xxx_dss_dispc_hwmod,
-	&omap3xxx_dss_dsi1_hwmod,
-	&omap3xxx_dss_rfbi_hwmod,
-	&omap3xxx_dss_venc_hwmod,
+static struct omap_hwmod_ocp_if *omap3xxx_dss_hwmod_ocp_ifs[] __initdata = {
+	&omap3xxx_l4_core__dss_dispc,
+	&omap3xxx_l4_core__dss_dsi1,
+	&omap3xxx_l4_core__dss_rfbi,
+	&omap3xxx_l4_core__dss_venc,
 	NULL
 };
 
 int __init omap3xxx_hwmod_init(void)
 {
 	int r;
-	struct omap_hwmod **h = NULL;
+	struct omap_hwmod_ocp_if **h = NULL;
 	unsigned int rev;
 
-	/* Register hwmods common to all OMAP3 */
-	r = omap_hwmod_register(omap3xxx_hwmods);
+	/* Register hwmod links common to all OMAP3 */
+	r = omap_hwmod_register_links(omap3xxx_hwmod_ocp_ifs);
 	if (r < 0)
 		return r;
 
-	/* Register GP-only hwmods. */
+	/* Register GP-only hwmod links. */
 	if (omap_type() == OMAP2_DEVICE_TYPE_GP) {
-		r = omap_hwmod_register(omap3xxx_gp_hwmods);
+		r = omap_hwmod_register_links(omap3xxx_gp_hwmod_ocp_ifs);
 		if (r < 0)
 			return r;
 	}
@@ -3704,43 +3298,43 @@ int __init omap3xxx_hwmod_init(void)
 	rev = omap_rev();
 
 	/*
-	 * Register hwmods common to individual OMAP3 families, all
+	 * Register hwmod links common to individual OMAP3 families, all
 	 * silicon revisions (e.g., 34xx, or AM3505/3517, or 36xx)
 	 * All possible revisions should be included in this conditional.
 	 */
 	if (rev == OMAP3430_REV_ES1_0 || rev == OMAP3430_REV_ES2_0 ||
 	    rev == OMAP3430_REV_ES2_1 || rev == OMAP3430_REV_ES3_0 ||
 	    rev == OMAP3430_REV_ES3_1 || rev == OMAP3430_REV_ES3_1_2) {
-		h = omap34xx_hwmods;
-	} else if (rev == OMAP3517_REV_ES1_0 || rev == OMAP3517_REV_ES1_1) {
-		h = am35xx_hwmods;
+		h = omap34xx_hwmod_ocp_ifs;
+	} else if (rev == AM35XX_REV_ES1_0 || rev == AM35XX_REV_ES1_1) {
+		h = am35xx_hwmod_ocp_ifs;
 	} else if (rev == OMAP3630_REV_ES1_0 || rev == OMAP3630_REV_ES1_1 ||
 		   rev == OMAP3630_REV_ES1_2) {
-		h = omap36xx_hwmods;
+		h = omap36xx_hwmod_ocp_ifs;
 	} else {
 		WARN(1, "OMAP3 hwmod family init: unknown chip type\n");
 		return -EINVAL;
 	};
 
-	r = omap_hwmod_register(h);
+	r = omap_hwmod_register_links(h);
 	if (r < 0)
 		return r;
 
 	/*
-	 * Register hwmods specific to certain ES levels of a
+	 * Register hwmod links specific to certain ES levels of a
 	 * particular family of silicon (e.g., 34xx ES1.0)
 	 */
 	h = NULL;
 	if (rev == OMAP3430_REV_ES1_0) {
-		h = omap3430es1_hwmods;
+		h = omap3430es1_hwmod_ocp_ifs;
 	} else if (rev == OMAP3430_REV_ES2_0 || rev == OMAP3430_REV_ES2_1 ||
 		   rev == OMAP3430_REV_ES3_0 || rev == OMAP3430_REV_ES3_1 ||
 		   rev == OMAP3430_REV_ES3_1_2) {
-		h = omap3430es2plus_hwmods;
+		h = omap3430es2plus_hwmod_ocp_ifs;
 	};
 
 	if (h) {
-		r = omap_hwmod_register(h);
+		r = omap_hwmod_register_links(h);
 		if (r < 0)
 			return r;
 	}
@@ -3748,29 +3342,29 @@ int __init omap3xxx_hwmod_init(void)
 	h = NULL;
 	if (rev == OMAP3430_REV_ES1_0 || rev == OMAP3430_REV_ES2_0 ||
 	    rev == OMAP3430_REV_ES2_1) {
-		h = omap3430_pre_es3_hwmods;
+		h = omap3430_pre_es3_hwmod_ocp_ifs;
 	} else if (rev == OMAP3430_REV_ES3_0 || rev == OMAP3430_REV_ES3_1 ||
 		   rev == OMAP3430_REV_ES3_1_2) {
-		h = omap3430_es3plus_hwmods;
+		h = omap3430_es3plus_hwmod_ocp_ifs;
 	};
 
 	if (h)
-		r = omap_hwmod_register(h);
+		r = omap_hwmod_register_links(h);
 	if (r < 0)
 		return r;
 
 	/*
 	 * DSS code presumes that dss_core hwmod is handled first,
 	 * _before_ any other DSS related hwmods so register common
-	 * DSS hwmods last to ensure that dss_core is already registered.
-	 * Otherwise some change things may happen, for ex. if dispc
-	 * is handled before dss_core and DSS is enabled in bootloader
-	 * DIPSC will be reset with outputs enabled which sometimes leads
-	 * to unrecoverable L3 error.
-	 * XXX The long-term fix to this is to ensure modules are set up
-	 * in dependency order in the hwmod core code.
+	 * DSS hwmod links last to ensure that dss_core is already
+	 * registered.  Otherwise some change things may happen, for
+	 * ex. if dispc is handled before dss_core and DSS is enabled
+	 * in bootloader DISPC will be reset with outputs enabled
+	 * which sometimes leads to unrecoverable L3 error.  XXX The
+	 * long-term fix to this is to ensure hwmods are set up in
+	 * dependency order in the hwmod core code.
 	 */
-	r = omap_hwmod_register(omap3xxx_dss_hwmods);
+	r = omap_hwmod_register_links(omap3xxx_dss_hwmod_ocp_ifs);
 
 	return r;
 }
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 08daa5e0eb5f..950454a3fa31 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -1,7 +1,7 @@
 /*
  * Hardware modules present on the OMAP44xx chips
  *
- * Copyright (C) 2009-2011 Texas Instruments, Inc.
+ * Copyright (C) 2009-2012 Texas Instruments, Inc.
  * Copyright (C) 2009-2010 Nokia Corporation
  *
  * Paul Walmsley
@@ -44,41 +44,34 @@
 #define OMAP44XX_IRQ_GIC_START	32
 
 /* Base offset for all OMAP4 dma requests */
-#define OMAP44XX_DMA_REQ_START  1
-
-/* Backward references (IPs with Bus Master capability) */
-static struct omap_hwmod omap44xx_aess_hwmod;
-static struct omap_hwmod omap44xx_dma_system_hwmod;
-static struct omap_hwmod omap44xx_dmm_hwmod;
-static struct omap_hwmod omap44xx_dsp_hwmod;
-static struct omap_hwmod omap44xx_dss_hwmod;
-static struct omap_hwmod omap44xx_emif_fw_hwmod;
-static struct omap_hwmod omap44xx_hsi_hwmod;
-static struct omap_hwmod omap44xx_ipu_hwmod;
-static struct omap_hwmod omap44xx_iss_hwmod;
-static struct omap_hwmod omap44xx_iva_hwmod;
-static struct omap_hwmod omap44xx_l3_instr_hwmod;
-static struct omap_hwmod omap44xx_l3_main_1_hwmod;
-static struct omap_hwmod omap44xx_l3_main_2_hwmod;
-static struct omap_hwmod omap44xx_l3_main_3_hwmod;
-static struct omap_hwmod omap44xx_l4_abe_hwmod;
-static struct omap_hwmod omap44xx_l4_cfg_hwmod;
-static struct omap_hwmod omap44xx_l4_per_hwmod;
-static struct omap_hwmod omap44xx_l4_wkup_hwmod;
-static struct omap_hwmod omap44xx_mmc1_hwmod;
-static struct omap_hwmod omap44xx_mmc2_hwmod;
-static struct omap_hwmod omap44xx_mpu_hwmod;
-static struct omap_hwmod omap44xx_mpu_private_hwmod;
-static struct omap_hwmod omap44xx_usb_otg_hs_hwmod;
-static struct omap_hwmod omap44xx_usb_host_hs_hwmod;
-static struct omap_hwmod omap44xx_usb_tll_hs_hwmod;
+#define OMAP44XX_DMA_REQ_START	1
 
 /*
- * Interconnects omap_hwmod structures
- * hwmods that compose the global OMAP interconnect
+ * IP blocks
  */
 
 /*
+ * 'c2c_target_fw' class
+ * instance(s): c2c_target_fw
+ */
+static struct omap_hwmod_class omap44xx_c2c_target_fw_hwmod_class = {
+	.name	= "c2c_target_fw",
+};
+
+/* c2c_target_fw */
+static struct omap_hwmod omap44xx_c2c_target_fw_hwmod = {
+	.name		= "c2c_target_fw",
+	.class		= &omap44xx_c2c_target_fw_hwmod_class,
+	.clkdm_name	= "d2d_clkdm",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = OMAP4_CM_D2D_SAD2D_FW_CLKCTRL_OFFSET,
+			.context_offs = OMAP4_RM_D2D_SAD2D_FW_CONTEXT_OFFSET,
+		},
+	},
+};
+
+/*
  * 'dmm' class
  * instance(s): dmm
  */
@@ -92,51 +85,17 @@ static struct omap_hwmod_irq_info omap44xx_dmm_irqs[] = {
 	{ .irq = -1 }
 };
 
-/* l3_main_1 -> dmm */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_1__dmm = {
-	.master		= &omap44xx_l3_main_1_hwmod,
-	.slave		= &omap44xx_dmm_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_addr_space omap44xx_dmm_addrs[] = {
-	{
-		.pa_start	= 0x4e000000,
-		.pa_end		= 0x4e0007ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* mpu -> dmm */
-static struct omap_hwmod_ocp_if omap44xx_mpu__dmm = {
-	.master		= &omap44xx_mpu_hwmod,
-	.slave		= &omap44xx_dmm_hwmod,
-	.clk		= "l3_div_ck",
-	.addr		= omap44xx_dmm_addrs,
-	.user		= OCP_USER_MPU,
-};
-
-/* dmm slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_dmm_slaves[] = {
-	&omap44xx_l3_main_1__dmm,
-	&omap44xx_mpu__dmm,
-};
-
 static struct omap_hwmod omap44xx_dmm_hwmod = {
 	.name		= "dmm",
 	.class		= &omap44xx_dmm_hwmod_class,
 	.clkdm_name	= "l3_emif_clkdm",
+	.mpu_irqs	= omap44xx_dmm_irqs,
 	.prcm = {
 		.omap4 = {
 			.clkctrl_offs = OMAP4_CM_MEMIF_DMM_CLKCTRL_OFFSET,
 			.context_offs = OMAP4_RM_MEMIF_DMM_CONTEXT_OFFSET,
 		},
 	},
-	.slaves		= omap44xx_dmm_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_dmm_slaves),
-	.mpu_irqs	= omap44xx_dmm_irqs,
 };
 
 /*
@@ -148,38 +107,6 @@ static struct omap_hwmod_class omap44xx_emif_fw_hwmod_class = {
 };
 
 /* emif_fw */
-/* dmm -> emif_fw */
-static struct omap_hwmod_ocp_if omap44xx_dmm__emif_fw = {
-	.master		= &omap44xx_dmm_hwmod,
-	.slave		= &omap44xx_emif_fw_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_addr_space omap44xx_emif_fw_addrs[] = {
-	{
-		.pa_start	= 0x4a20c000,
-		.pa_end		= 0x4a20c0ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_cfg -> emif_fw */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__emif_fw = {
-	.master		= &omap44xx_l4_cfg_hwmod,
-	.slave		= &omap44xx_emif_fw_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_emif_fw_addrs,
-	.user		= OCP_USER_MPU,
-};
-
-/* emif_fw slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_emif_fw_slaves[] = {
-	&omap44xx_dmm__emif_fw,
-	&omap44xx_l4_cfg__emif_fw,
-};
-
 static struct omap_hwmod omap44xx_emif_fw_hwmod = {
 	.name		= "emif_fw",
 	.class		= &omap44xx_emif_fw_hwmod_class,
@@ -190,8 +117,6 @@ static struct omap_hwmod omap44xx_emif_fw_hwmod = {
 			.context_offs = OMAP4_RM_MEMIF_EMIF_FW_CONTEXT_OFFSET,
 		},
 	},
-	.slaves		= omap44xx_emif_fw_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_emif_fw_slaves),
 };
 
 /*
@@ -203,28 +128,6 @@ static struct omap_hwmod_class omap44xx_l3_hwmod_class = {
 };
 
 /* l3_instr */
-/* iva -> l3_instr */
-static struct omap_hwmod_ocp_if omap44xx_iva__l3_instr = {
-	.master		= &omap44xx_iva_hwmod,
-	.slave		= &omap44xx_l3_instr_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_3 -> l3_instr */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_3__l3_instr = {
-	.master		= &omap44xx_l3_main_3_hwmod,
-	.slave		= &omap44xx_l3_instr_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_instr slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_l3_instr_slaves[] = {
-	&omap44xx_iva__l3_instr,
-	&omap44xx_l3_main_3__l3_instr,
-};
-
 static struct omap_hwmod omap44xx_l3_instr_hwmod = {
 	.name		= "l3_instr",
 	.class		= &omap44xx_l3_hwmod_class,
@@ -236,8 +139,6 @@ static struct omap_hwmod omap44xx_l3_instr_hwmod = {
 			.modulemode   = MODULEMODE_HWCTRL,
 		},
 	},
-	.slaves		= omap44xx_l3_instr_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_l3_instr_slaves),
 };
 
 /* l3_main_1 */
@@ -247,83 +148,6 @@ static struct omap_hwmod_irq_info omap44xx_l3_main_1_irqs[] = {
 	{ .irq = -1 }
 };
 
-/* dsp -> l3_main_1 */
-static struct omap_hwmod_ocp_if omap44xx_dsp__l3_main_1 = {
-	.master		= &omap44xx_dsp_hwmod,
-	.slave		= &omap44xx_l3_main_1_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* dss -> l3_main_1 */
-static struct omap_hwmod_ocp_if omap44xx_dss__l3_main_1 = {
-	.master		= &omap44xx_dss_hwmod,
-	.slave		= &omap44xx_l3_main_1_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_2 -> l3_main_1 */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__l3_main_1 = {
-	.master		= &omap44xx_l3_main_2_hwmod,
-	.slave		= &omap44xx_l3_main_1_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> l3_main_1 */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_1 = {
-	.master		= &omap44xx_l4_cfg_hwmod,
-	.slave		= &omap44xx_l3_main_1_hwmod,
-	.clk		= "l4_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mmc1 -> l3_main_1 */
-static struct omap_hwmod_ocp_if omap44xx_mmc1__l3_main_1 = {
-	.master		= &omap44xx_mmc1_hwmod,
-	.slave		= &omap44xx_l3_main_1_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mmc2 -> l3_main_1 */
-static struct omap_hwmod_ocp_if omap44xx_mmc2__l3_main_1 = {
-	.master		= &omap44xx_mmc2_hwmod,
-	.slave		= &omap44xx_l3_main_1_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_addr_space omap44xx_l3_main_1_addrs[] = {
-	{
-		.pa_start	= 0x44000000,
-		.pa_end		= 0x44000fff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* mpu -> l3_main_1 */
-static struct omap_hwmod_ocp_if omap44xx_mpu__l3_main_1 = {
-	.master		= &omap44xx_mpu_hwmod,
-	.slave		= &omap44xx_l3_main_1_hwmod,
-	.clk		= "l3_div_ck",
-	.addr		= omap44xx_l3_main_1_addrs,
-	.user		= OCP_USER_MPU,
-};
-
-/* l3_main_1 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_l3_main_1_slaves[] = {
-	&omap44xx_dsp__l3_main_1,
-	&omap44xx_dss__l3_main_1,
-	&omap44xx_l3_main_2__l3_main_1,
-	&omap44xx_l4_cfg__l3_main_1,
-	&omap44xx_mmc1__l3_main_1,
-	&omap44xx_mmc2__l3_main_1,
-	&omap44xx_mpu__l3_main_1,
-};
-
 static struct omap_hwmod omap44xx_l3_main_1_hwmod = {
 	.name		= "l3_main_1",
 	.class		= &omap44xx_l3_hwmod_class,
@@ -335,97 +159,9 @@ static struct omap_hwmod omap44xx_l3_main_1_hwmod = {
 			.context_offs = OMAP4_RM_L3_1_L3_1_CONTEXT_OFFSET,
 		},
 	},
-	.slaves		= omap44xx_l3_main_1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_l3_main_1_slaves),
 };
 
 /* l3_main_2 */
-/* dma_system -> l3_main_2 */
-static struct omap_hwmod_ocp_if omap44xx_dma_system__l3_main_2 = {
-	.master		= &omap44xx_dma_system_hwmod,
-	.slave		= &omap44xx_l3_main_2_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* hsi -> l3_main_2 */
-static struct omap_hwmod_ocp_if omap44xx_hsi__l3_main_2 = {
-	.master		= &omap44xx_hsi_hwmod,
-	.slave		= &omap44xx_l3_main_2_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* ipu -> l3_main_2 */
-static struct omap_hwmod_ocp_if omap44xx_ipu__l3_main_2 = {
-	.master		= &omap44xx_ipu_hwmod,
-	.slave		= &omap44xx_l3_main_2_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* iss -> l3_main_2 */
-static struct omap_hwmod_ocp_if omap44xx_iss__l3_main_2 = {
-	.master		= &omap44xx_iss_hwmod,
-	.slave		= &omap44xx_l3_main_2_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* iva -> l3_main_2 */
-static struct omap_hwmod_ocp_if omap44xx_iva__l3_main_2 = {
-	.master		= &omap44xx_iva_hwmod,
-	.slave		= &omap44xx_l3_main_2_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_addr_space omap44xx_l3_main_2_addrs[] = {
-	{
-		.pa_start	= 0x44800000,
-		.pa_end		= 0x44801fff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l3_main_1 -> l3_main_2 */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l3_main_2 = {
-	.master		= &omap44xx_l3_main_1_hwmod,
-	.slave		= &omap44xx_l3_main_2_hwmod,
-	.clk		= "l3_div_ck",
-	.addr		= omap44xx_l3_main_2_addrs,
-	.user		= OCP_USER_MPU,
-};
-
-/* l4_cfg -> l3_main_2 */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_2 = {
-	.master		= &omap44xx_l4_cfg_hwmod,
-	.slave		= &omap44xx_l3_main_2_hwmod,
-	.clk		= "l4_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* usb_otg_hs -> l3_main_2 */
-static struct omap_hwmod_ocp_if omap44xx_usb_otg_hs__l3_main_2 = {
-	.master		= &omap44xx_usb_otg_hs_hwmod,
-	.slave		= &omap44xx_l3_main_2_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_2 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_l3_main_2_slaves[] = {
-	&omap44xx_dma_system__l3_main_2,
-	&omap44xx_hsi__l3_main_2,
-	&omap44xx_ipu__l3_main_2,
-	&omap44xx_iss__l3_main_2,
-	&omap44xx_iva__l3_main_2,
-	&omap44xx_l3_main_1__l3_main_2,
-	&omap44xx_l4_cfg__l3_main_2,
-	&omap44xx_usb_otg_hs__l3_main_2,
-};
-
 static struct omap_hwmod omap44xx_l3_main_2_hwmod = {
 	.name		= "l3_main_2",
 	.class		= &omap44xx_l3_hwmod_class,
@@ -436,52 +172,9 @@ static struct omap_hwmod omap44xx_l3_main_2_hwmod = {
 			.context_offs = OMAP4_RM_L3_2_L3_2_CONTEXT_OFFSET,
 		},
 	},
-	.slaves		= omap44xx_l3_main_2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_l3_main_2_slaves),
 };
 
 /* l3_main_3 */
-static struct omap_hwmod_addr_space omap44xx_l3_main_3_addrs[] = {
-	{
-		.pa_start	= 0x45000000,
-		.pa_end		= 0x45000fff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l3_main_1 -> l3_main_3 */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l3_main_3 = {
-	.master		= &omap44xx_l3_main_1_hwmod,
-	.slave		= &omap44xx_l3_main_3_hwmod,
-	.clk		= "l3_div_ck",
-	.addr		= omap44xx_l3_main_3_addrs,
-	.user		= OCP_USER_MPU,
-};
-
-/* l3_main_2 -> l3_main_3 */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__l3_main_3 = {
-	.master		= &omap44xx_l3_main_2_hwmod,
-	.slave		= &omap44xx_l3_main_3_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> l3_main_3 */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_3 = {
-	.master		= &omap44xx_l4_cfg_hwmod,
-	.slave		= &omap44xx_l3_main_3_hwmod,
-	.clk		= "l4_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_3 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_l3_main_3_slaves[] = {
-	&omap44xx_l3_main_1__l3_main_3,
-	&omap44xx_l3_main_2__l3_main_3,
-	&omap44xx_l4_cfg__l3_main_3,
-};
-
 static struct omap_hwmod omap44xx_l3_main_3_hwmod = {
 	.name		= "l3_main_3",
 	.class		= &omap44xx_l3_hwmod_class,
@@ -493,8 +186,6 @@ static struct omap_hwmod omap44xx_l3_main_3_hwmod = {
 			.modulemode   = MODULEMODE_HWCTRL,
 		},
 	},
-	.slaves		= omap44xx_l3_main_3_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_l3_main_3_slaves),
 };
 
 /*
@@ -506,46 +197,6 @@ static struct omap_hwmod_class omap44xx_l4_hwmod_class = {
 };
 
 /* l4_abe */
-/* aess -> l4_abe */
-static struct omap_hwmod_ocp_if omap44xx_aess__l4_abe = {
-	.master		= &omap44xx_aess_hwmod,
-	.slave		= &omap44xx_l4_abe_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* dsp -> l4_abe */
-static struct omap_hwmod_ocp_if omap44xx_dsp__l4_abe = {
-	.master		= &omap44xx_dsp_hwmod,
-	.slave		= &omap44xx_l4_abe_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_1 -> l4_abe */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l4_abe = {
-	.master		= &omap44xx_l3_main_1_hwmod,
-	.slave		= &omap44xx_l4_abe_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mpu -> l4_abe */
-static struct omap_hwmod_ocp_if omap44xx_mpu__l4_abe = {
-	.master		= &omap44xx_mpu_hwmod,
-	.slave		= &omap44xx_l4_abe_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_abe slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_l4_abe_slaves[] = {
-	&omap44xx_aess__l4_abe,
-	&omap44xx_dsp__l4_abe,
-	&omap44xx_l3_main_1__l4_abe,
-	&omap44xx_mpu__l4_abe,
-};
-
 static struct omap_hwmod omap44xx_l4_abe_hwmod = {
 	.name		= "l4_abe",
 	.class		= &omap44xx_l4_hwmod_class,
@@ -555,24 +206,9 @@ static struct omap_hwmod omap44xx_l4_abe_hwmod = {
 			.clkctrl_offs = OMAP4_CM1_ABE_L4ABE_CLKCTRL_OFFSET,
 		},
 	},
-	.slaves		= omap44xx_l4_abe_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_l4_abe_slaves),
 };
 
 /* l4_cfg */
-/* l3_main_1 -> l4_cfg */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l4_cfg = {
-	.master		= &omap44xx_l3_main_1_hwmod,
-	.slave		= &omap44xx_l4_cfg_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_l4_cfg_slaves[] = {
-	&omap44xx_l3_main_1__l4_cfg,
-};
-
 static struct omap_hwmod omap44xx_l4_cfg_hwmod = {
 	.name		= "l4_cfg",
 	.class		= &omap44xx_l4_hwmod_class,
@@ -583,24 +219,9 @@ static struct omap_hwmod omap44xx_l4_cfg_hwmod = {
 			.context_offs = OMAP4_RM_L4CFG_L4_CFG_CONTEXT_OFFSET,
 		},
 	},
-	.slaves		= omap44xx_l4_cfg_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_l4_cfg_slaves),
 };
 
 /* l4_per */
-/* l3_main_2 -> l4_per */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__l4_per = {
-	.master		= &omap44xx_l3_main_2_hwmod,
-	.slave		= &omap44xx_l4_per_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_l4_per_slaves[] = {
-	&omap44xx_l3_main_2__l4_per,
-};
-
 static struct omap_hwmod omap44xx_l4_per_hwmod = {
 	.name		= "l4_per",
 	.class		= &omap44xx_l4_hwmod_class,
@@ -611,24 +232,9 @@ static struct omap_hwmod omap44xx_l4_per_hwmod = {
 			.context_offs = OMAP4_RM_L4PER_L4_PER_CONTEXT_OFFSET,
 		},
 	},
-	.slaves		= omap44xx_l4_per_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_l4_per_slaves),
 };
 
 /* l4_wkup */
-/* l4_cfg -> l4_wkup */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l4_wkup = {
-	.master		= &omap44xx_l4_cfg_hwmod,
-	.slave		= &omap44xx_l4_wkup_hwmod,
-	.clk		= "l4_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_wkup slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_l4_wkup_slaves[] = {
-	&omap44xx_l4_cfg__l4_wkup,
-};
-
 static struct omap_hwmod omap44xx_l4_wkup_hwmod = {
 	.name		= "l4_wkup",
 	.class		= &omap44xx_l4_hwmod_class,
@@ -639,8 +245,6 @@ static struct omap_hwmod omap44xx_l4_wkup_hwmod = {
 			.context_offs = OMAP4_RM_WKUP_L4WKUP_CONTEXT_OFFSET,
 		},
 	},
-	.slaves		= omap44xx_l4_wkup_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_l4_wkup_slaves),
 };
 
 /*
@@ -652,25 +256,32 @@ static struct omap_hwmod_class omap44xx_mpu_bus_hwmod_class = {
 };
 
 /* mpu_private */
-/* mpu -> mpu_private */
-static struct omap_hwmod_ocp_if omap44xx_mpu__mpu_private = {
-	.master		= &omap44xx_mpu_hwmod,
-	.slave		= &omap44xx_mpu_private_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mpu_private slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_mpu_private_slaves[] = {
-	&omap44xx_mpu__mpu_private,
-};
-
 static struct omap_hwmod omap44xx_mpu_private_hwmod = {
 	.name		= "mpu_private",
 	.class		= &omap44xx_mpu_bus_hwmod_class,
 	.clkdm_name	= "mpuss_clkdm",
-	.slaves		= omap44xx_mpu_private_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_mpu_private_slaves),
+};
+
+/*
+ * 'ocp_wp_noc' class
+ * instance(s): ocp_wp_noc
+ */
+static struct omap_hwmod_class omap44xx_ocp_wp_noc_hwmod_class = {
+	.name	= "ocp_wp_noc",
+};
+
+/* ocp_wp_noc */
+static struct omap_hwmod omap44xx_ocp_wp_noc_hwmod = {
+	.name		= "ocp_wp_noc",
+	.class		= &omap44xx_ocp_wp_noc_hwmod_class,
+	.clkdm_name	= "l3_instr_clkdm",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = OMAP4_CM_L3INSTR_OCP_WP1_CLKCTRL_OFFSET,
+			.context_offs = OMAP4_RM_L3INSTR_OCP_WP1_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
 };
 
 /*
@@ -681,41 +292,7 @@ static struct omap_hwmod omap44xx_mpu_private_hwmod = {
  * - They still need to be validated with the driver
  *   properly adapted to omap_hwmod / omap_device
  *
- *  c2c
- *  c2c_target_fw
- *  cm_core
- *  cm_core_aon
- *  ctrl_module_core
- *  ctrl_module_pad_core
- *  ctrl_module_pad_wkup
- *  ctrl_module_wkup
- *  debugss
- *  efuse_ctrl_cust
- *  efuse_ctrl_std
- *  elm
- *  emif1
- *  emif2
- *  fdif
- *  gpmc
- *  gpu
- *  hdq1w
- *  mcasp
- *  mpu_c0
- *  mpu_c1
- *  ocmc_ram
- *  ocp2scp_usb_phy
- *  ocp_wp_noc
- *  prcm_mpu
- *  prm
- *  scrm
- *  sl2if
- *  slimbus1
- *  slimbus2
- *  usb_host_fs
- *  usb_host_hs
- *  usb_phy_cm
- *  usb_tll_hs
- *  usim
+ * usim
  */
 
 /*
@@ -756,53 +333,6 @@ static struct omap_hwmod_dma_info omap44xx_aess_sdma_reqs[] = {
 	{ .dma_req = -1 }
 };
 
-/* aess master ports */
-static struct omap_hwmod_ocp_if *omap44xx_aess_masters[] = {
-	&omap44xx_aess__l4_abe,
-};
-
-static struct omap_hwmod_addr_space omap44xx_aess_addrs[] = {
-	{
-		.pa_start	= 0x401f1000,
-		.pa_end		= 0x401f13ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_abe -> aess */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__aess = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_aess_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.addr		= omap44xx_aess_addrs,
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_addr_space omap44xx_aess_dma_addrs[] = {
-	{
-		.pa_start	= 0x490f1000,
-		.pa_end		= 0x490f13ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_abe -> aess (dma) */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__aess_dma = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_aess_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.addr		= omap44xx_aess_dma_addrs,
-	.user		= OCP_USER_SDMA,
-};
-
-/* aess slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_aess_slaves[] = {
-	&omap44xx_l4_abe__aess,
-	&omap44xx_l4_abe__aess_dma,
-};
-
 static struct omap_hwmod omap44xx_aess_hwmod = {
 	.name		= "aess",
 	.class		= &omap44xx_aess_hwmod_class,
@@ -817,37 +347,41 @@ static struct omap_hwmod omap44xx_aess_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.slaves		= omap44xx_aess_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_aess_slaves),
-	.masters	= omap44xx_aess_masters,
-	.masters_cnt	= ARRAY_SIZE(omap44xx_aess_masters),
 };
 
 /*
- * 'bandgap' class
- * bangap reference for ldo regulators
+ * 'c2c' class
+ * chip 2 chip interface used to plug the ape soc (omap) with an external modem
+ * soc
  */
 
-static struct omap_hwmod_class omap44xx_bandgap_hwmod_class = {
-	.name	= "bandgap",
+static struct omap_hwmod_class omap44xx_c2c_hwmod_class = {
+	.name	= "c2c",
+};
+
+/* c2c */
+static struct omap_hwmod_irq_info omap44xx_c2c_irqs[] = {
+	{ .irq = 88 + OMAP44XX_IRQ_GIC_START },
+	{ .irq = -1 }
 };
 
-/* bandgap */
-static struct omap_hwmod_opt_clk bandgap_opt_clks[] = {
-	{ .role = "fclk", .clk = "bandgap_fclk" },
+static struct omap_hwmod_dma_info omap44xx_c2c_sdma_reqs[] = {
+	{ .dma_req = 68 + OMAP44XX_DMA_REQ_START },
+	{ .dma_req = -1 }
 };
 
-static struct omap_hwmod omap44xx_bandgap_hwmod = {
-	.name		= "bandgap",
-	.class		= &omap44xx_bandgap_hwmod_class,
-	.clkdm_name	= "l4_wkup_clkdm",
+static struct omap_hwmod omap44xx_c2c_hwmod = {
+	.name		= "c2c",
+	.class		= &omap44xx_c2c_hwmod_class,
+	.clkdm_name	= "d2d_clkdm",
+	.mpu_irqs	= omap44xx_c2c_irqs,
+	.sdma_reqs	= omap44xx_c2c_sdma_reqs,
 	.prcm = {
 		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_WKUP_BANDGAP_CLKCTRL_OFFSET,
+			.clkctrl_offs = OMAP4_CM_D2D_SAD2D_CLKCTRL_OFFSET,
+			.context_offs = OMAP4_RM_D2D_SAD2D_CONTEXT_OFFSET,
 		},
 	},
-	.opt_clks	= bandgap_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(bandgap_opt_clks),
 };
 
 /*
@@ -870,30 +404,6 @@ static struct omap_hwmod_class omap44xx_counter_hwmod_class = {
 };
 
 /* counter_32k */
-static struct omap_hwmod omap44xx_counter_32k_hwmod;
-static struct omap_hwmod_addr_space omap44xx_counter_32k_addrs[] = {
-	{
-		.pa_start	= 0x4a304000,
-		.pa_end		= 0x4a30401f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_wkup -> counter_32k */
-static struct omap_hwmod_ocp_if omap44xx_l4_wkup__counter_32k = {
-	.master		= &omap44xx_l4_wkup_hwmod,
-	.slave		= &omap44xx_counter_32k_hwmod,
-	.clk		= "l4_wkup_clk_mux_ck",
-	.addr		= omap44xx_counter_32k_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* counter_32k slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_counter_32k_slaves[] = {
-	&omap44xx_l4_wkup__counter_32k,
-};
-
 static struct omap_hwmod omap44xx_counter_32k_hwmod = {
 	.name		= "counter_32k",
 	.class		= &omap44xx_counter_hwmod_class,
@@ -906,8 +416,83 @@ static struct omap_hwmod omap44xx_counter_32k_hwmod = {
 			.context_offs = OMAP4_RM_WKUP_SYNCTIMER_CONTEXT_OFFSET,
 		},
 	},
-	.slaves		= omap44xx_counter_32k_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_counter_32k_slaves),
+};
+
+/*
+ * 'ctrl_module' class
+ * attila core control module + core pad control module + wkup pad control
+ * module + attila wkup control module
+ */
+
+static struct omap_hwmod_class_sysconfig omap44xx_ctrl_module_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.sysc_flags	= SYSC_HAS_SIDLEMODE,
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class omap44xx_ctrl_module_hwmod_class = {
+	.name	= "ctrl_module",
+	.sysc	= &omap44xx_ctrl_module_sysc,
+};
+
+/* ctrl_module_core */
+static struct omap_hwmod_irq_info omap44xx_ctrl_module_core_irqs[] = {
+	{ .irq = 8 + OMAP44XX_IRQ_GIC_START },
+	{ .irq = -1 }
+};
+
+static struct omap_hwmod omap44xx_ctrl_module_core_hwmod = {
+	.name		= "ctrl_module_core",
+	.class		= &omap44xx_ctrl_module_hwmod_class,
+	.clkdm_name	= "l4_cfg_clkdm",
+	.mpu_irqs	= omap44xx_ctrl_module_core_irqs,
+};
+
+/* ctrl_module_pad_core */
+static struct omap_hwmod omap44xx_ctrl_module_pad_core_hwmod = {
+	.name		= "ctrl_module_pad_core",
+	.class		= &omap44xx_ctrl_module_hwmod_class,
+	.clkdm_name	= "l4_cfg_clkdm",
+};
+
+/* ctrl_module_wkup */
+static struct omap_hwmod omap44xx_ctrl_module_wkup_hwmod = {
+	.name		= "ctrl_module_wkup",
+	.class		= &omap44xx_ctrl_module_hwmod_class,
+	.clkdm_name	= "l4_wkup_clkdm",
+};
+
+/* ctrl_module_pad_wkup */
+static struct omap_hwmod omap44xx_ctrl_module_pad_wkup_hwmod = {
+	.name		= "ctrl_module_pad_wkup",
+	.class		= &omap44xx_ctrl_module_hwmod_class,
+	.clkdm_name	= "l4_wkup_clkdm",
+};
+
+/*
+ * 'debugss' class
+ * debug and emulation sub system
+ */
+
+static struct omap_hwmod_class omap44xx_debugss_hwmod_class = {
+	.name	= "debugss",
+};
+
+/* debugss */
+static struct omap_hwmod omap44xx_debugss_hwmod = {
+	.name		= "debugss",
+	.class		= &omap44xx_debugss_hwmod_class,
+	.clkdm_name	= "emu_sys_clkdm",
+	.main_clk	= "trace_clk_div_ck",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = OMAP4_CM_EMU_DEBUGSS_CLKCTRL_OFFSET,
+			.context_offs = OMAP4_RM_EMU_DEBUGSS_CONTEXT_OFFSET,
+		},
+	},
 };
 
 /*
@@ -950,34 +535,6 @@ static struct omap_hwmod_irq_info omap44xx_dma_system_irqs[] = {
 	{ .irq = -1 }
 };
 
-/* dma_system master ports */
-static struct omap_hwmod_ocp_if *omap44xx_dma_system_masters[] = {
-	&omap44xx_dma_system__l3_main_2,
-};
-
-static struct omap_hwmod_addr_space omap44xx_dma_system_addrs[] = {
-	{
-		.pa_start	= 0x4a056000,
-		.pa_end		= 0x4a056fff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_cfg -> dma_system */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__dma_system = {
-	.master		= &omap44xx_l4_cfg_hwmod,
-	.slave		= &omap44xx_dma_system_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_dma_system_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* dma_system slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_dma_system_slaves[] = {
-	&omap44xx_l4_cfg__dma_system,
-};
-
 static struct omap_hwmod omap44xx_dma_system_hwmod = {
 	.name		= "dma_system",
 	.class		= &omap44xx_dma_hwmod_class,
@@ -991,10 +548,6 @@ static struct omap_hwmod omap44xx_dma_system_hwmod = {
 		},
 	},
 	.dev_attr	= &dma_dev_attr,
-	.slaves		= omap44xx_dma_system_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_dma_system_slaves),
-	.masters	= omap44xx_dma_system_masters,
-	.masters_cnt	= ARRAY_SIZE(omap44xx_dma_system_masters),
 };
 
 /*
@@ -1018,7 +571,6 @@ static struct omap_hwmod_class omap44xx_dmic_hwmod_class = {
 };
 
 /* dmic */
-static struct omap_hwmod omap44xx_dmic_hwmod;
 static struct omap_hwmod_irq_info omap44xx_dmic_irqs[] = {
 	{ .irq = 114 + OMAP44XX_IRQ_GIC_START },
 	{ .irq = -1 }
@@ -1029,50 +581,6 @@ static struct omap_hwmod_dma_info omap44xx_dmic_sdma_reqs[] = {
 	{ .dma_req = -1 }
 };
 
-static struct omap_hwmod_addr_space omap44xx_dmic_addrs[] = {
-	{
-		.name		= "mpu",
-		.pa_start	= 0x4012e000,
-		.pa_end		= 0x4012e07f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_abe -> dmic */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__dmic = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_dmic_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.addr		= omap44xx_dmic_addrs,
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_addr_space omap44xx_dmic_dma_addrs[] = {
-	{
-		.name		= "dma",
-		.pa_start	= 0x4902e000,
-		.pa_end		= 0x4902e07f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_abe -> dmic (dma) */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__dmic_dma = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_dmic_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.addr		= omap44xx_dmic_dma_addrs,
-	.user		= OCP_USER_SDMA,
-};
-
-/* dmic slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_dmic_slaves[] = {
-	&omap44xx_l4_abe__dmic,
-	&omap44xx_l4_abe__dmic_dma,
-};
-
 static struct omap_hwmod omap44xx_dmic_hwmod = {
 	.name		= "dmic",
 	.class		= &omap44xx_dmic_hwmod_class,
@@ -1087,8 +595,6 @@ static struct omap_hwmod omap44xx_dmic_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.slaves		= omap44xx_dmic_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_dmic_slaves),
 };
 
 /*
@@ -1107,53 +613,8 @@ static struct omap_hwmod_irq_info omap44xx_dsp_irqs[] = {
 };
 
 static struct omap_hwmod_rst_info omap44xx_dsp_resets[] = {
-	{ .name = "mmu_cache", .rst_shift = 1 },
-};
-
-static struct omap_hwmod_rst_info omap44xx_dsp_c0_resets[] = {
 	{ .name = "dsp", .rst_shift = 0 },
-};
-
-/* dsp -> iva */
-static struct omap_hwmod_ocp_if omap44xx_dsp__iva = {
-	.master		= &omap44xx_dsp_hwmod,
-	.slave		= &omap44xx_iva_hwmod,
-	.clk		= "dpll_iva_m5x2_ck",
-};
-
-/* dsp master ports */
-static struct omap_hwmod_ocp_if *omap44xx_dsp_masters[] = {
-	&omap44xx_dsp__l3_main_1,
-	&omap44xx_dsp__l4_abe,
-	&omap44xx_dsp__iva,
-};
-
-/* l4_cfg -> dsp */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__dsp = {
-	.master		= &omap44xx_l4_cfg_hwmod,
-	.slave		= &omap44xx_dsp_hwmod,
-	.clk		= "l4_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* dsp slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_dsp_slaves[] = {
-	&omap44xx_l4_cfg__dsp,
-};
-
-/* Pseudo hwmod for reset control purpose only */
-static struct omap_hwmod omap44xx_dsp_c0_hwmod = {
-	.name		= "dsp_c0",
-	.class		= &omap44xx_dsp_hwmod_class,
-	.clkdm_name	= "tesla_clkdm",
-	.flags		= HWMOD_INIT_NO_RESET,
-	.rst_lines	= omap44xx_dsp_c0_resets,
-	.rst_lines_cnt	= ARRAY_SIZE(omap44xx_dsp_c0_resets),
-	.prcm = {
-		.omap4 = {
-			.rstctrl_offs = OMAP4_RM_TESLA_RSTCTRL_OFFSET,
-		},
-	},
+	{ .name = "mmu_cache", .rst_shift = 1 },
 };
 
 static struct omap_hwmod omap44xx_dsp_hwmod = {
@@ -1172,10 +633,6 @@ static struct omap_hwmod omap44xx_dsp_hwmod = {
 			.modulemode   = MODULEMODE_HWCTRL,
 		},
 	},
-	.slaves		= omap44xx_dsp_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_dsp_slaves),
-	.masters	= omap44xx_dsp_masters,
-	.masters_cnt	= ARRAY_SIZE(omap44xx_dsp_masters),
 };
 
 /*
@@ -1196,53 +653,6 @@ static struct omap_hwmod_class omap44xx_dss_hwmod_class = {
 };
 
 /* dss */
-/* dss master ports */
-static struct omap_hwmod_ocp_if *omap44xx_dss_masters[] = {
-	&omap44xx_dss__l3_main_1,
-};
-
-static struct omap_hwmod_addr_space omap44xx_dss_dma_addrs[] = {
-	{
-		.pa_start	= 0x58000000,
-		.pa_end		= 0x5800007f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l3_main_2 -> dss */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss = {
-	.master		= &omap44xx_l3_main_2_hwmod,
-	.slave		= &omap44xx_dss_hwmod,
-	.clk		= "dss_fck",
-	.addr		= omap44xx_dss_dma_addrs,
-	.user		= OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_addr_space omap44xx_dss_addrs[] = {
-	{
-		.pa_start	= 0x48040000,
-		.pa_end		= 0x4804007f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> dss */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__dss = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_dss_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_dss_addrs,
-	.user		= OCP_USER_MPU,
-};
-
-/* dss slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_dss_slaves[] = {
-	&omap44xx_l3_main_2__dss,
-	&omap44xx_l4_per__dss,
-};
-
 static struct omap_hwmod_opt_clk dss_opt_clks[] = {
 	{ .role = "sys_clk", .clk = "dss_sys_clk" },
 	{ .role = "tv_clk", .clk = "dss_tv_clk" },
@@ -1263,10 +673,6 @@ static struct omap_hwmod omap44xx_dss_hwmod = {
 	},
 	.opt_clks	= dss_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(dss_opt_clks),
-	.slaves		= omap44xx_dss_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_dss_slaves),
-	.masters	= omap44xx_dss_masters,
-	.masters_cnt	= ARRAY_SIZE(omap44xx_dss_masters),
 };
 
 /*
@@ -1293,7 +699,6 @@ static struct omap_hwmod_class omap44xx_dispc_hwmod_class = {
 };
 
 /* dss_dispc */
-static struct omap_hwmod omap44xx_dss_dispc_hwmod;
 static struct omap_hwmod_irq_info omap44xx_dss_dispc_irqs[] = {
 	{ .irq = 25 + OMAP44XX_IRQ_GIC_START },
 	{ .irq = -1 }
@@ -1304,53 +709,11 @@ static struct omap_hwmod_dma_info omap44xx_dss_dispc_sdma_reqs[] = {
 	{ .dma_req = -1 }
 };
 
-static struct omap_hwmod_addr_space omap44xx_dss_dispc_dma_addrs[] = {
-	{
-		.pa_start	= 0x58001000,
-		.pa_end		= 0x58001fff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l3_main_2 -> dss_dispc */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_dispc = {
-	.master		= &omap44xx_l3_main_2_hwmod,
-	.slave		= &omap44xx_dss_dispc_hwmod,
-	.clk		= "dss_fck",
-	.addr		= omap44xx_dss_dispc_dma_addrs,
-	.user		= OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_addr_space omap44xx_dss_dispc_addrs[] = {
-	{
-		.pa_start	= 0x48041000,
-		.pa_end		= 0x48041fff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
 static struct omap_dss_dispc_dev_attr omap44xx_dss_dispc_dev_attr = {
 	.manager_count		= 3,
 	.has_framedonetv_irq	= 1
 };
 
-/* l4_per -> dss_dispc */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_dispc = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_dss_dispc_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_dss_dispc_addrs,
-	.user		= OCP_USER_MPU,
-};
-
-/* dss_dispc slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_dss_dispc_slaves[] = {
-	&omap44xx_l3_main_2__dss_dispc,
-	&omap44xx_l4_per__dss_dispc,
-};
-
 static struct omap_hwmod omap44xx_dss_dispc_hwmod = {
 	.name		= "dss_dispc",
 	.class		= &omap44xx_dispc_hwmod_class,
@@ -1364,8 +727,6 @@ static struct omap_hwmod omap44xx_dss_dispc_hwmod = {
 			.context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET,
 		},
 	},
-	.slaves		= omap44xx_dss_dispc_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_dss_dispc_slaves),
 	.dev_attr	= &omap44xx_dss_dispc_dev_attr
 };
 
@@ -1391,7 +752,6 @@ static struct omap_hwmod_class omap44xx_dsi_hwmod_class = {
 };
 
 /* dss_dsi1 */
-static struct omap_hwmod omap44xx_dss_dsi1_hwmod;
 static struct omap_hwmod_irq_info omap44xx_dss_dsi1_irqs[] = {
 	{ .irq = 53 + OMAP44XX_IRQ_GIC_START },
 	{ .irq = -1 }
@@ -1402,48 +762,6 @@ static struct omap_hwmod_dma_info omap44xx_dss_dsi1_sdma_reqs[] = {
 	{ .dma_req = -1 }
 };
 
-static struct omap_hwmod_addr_space omap44xx_dss_dsi1_dma_addrs[] = {
-	{
-		.pa_start	= 0x58004000,
-		.pa_end		= 0x580041ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l3_main_2 -> dss_dsi1 */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_dsi1 = {
-	.master		= &omap44xx_l3_main_2_hwmod,
-	.slave		= &omap44xx_dss_dsi1_hwmod,
-	.clk		= "dss_fck",
-	.addr		= omap44xx_dss_dsi1_dma_addrs,
-	.user		= OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_addr_space omap44xx_dss_dsi1_addrs[] = {
-	{
-		.pa_start	= 0x48044000,
-		.pa_end		= 0x480441ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> dss_dsi1 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_dsi1 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_dss_dsi1_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_dss_dsi1_addrs,
-	.user		= OCP_USER_MPU,
-};
-
-/* dss_dsi1 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_dss_dsi1_slaves[] = {
-	&omap44xx_l3_main_2__dss_dsi1,
-	&omap44xx_l4_per__dss_dsi1,
-};
-
 static struct omap_hwmod_opt_clk dss_dsi1_opt_clks[] = {
 	{ .role = "sys_clk", .clk = "dss_sys_clk" },
 };
@@ -1463,12 +781,9 @@ static struct omap_hwmod omap44xx_dss_dsi1_hwmod = {
 	},
 	.opt_clks	= dss_dsi1_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(dss_dsi1_opt_clks),
-	.slaves		= omap44xx_dss_dsi1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_dss_dsi1_slaves),
 };
 
 /* dss_dsi2 */
-static struct omap_hwmod omap44xx_dss_dsi2_hwmod;
 static struct omap_hwmod_irq_info omap44xx_dss_dsi2_irqs[] = {
 	{ .irq = 84 + OMAP44XX_IRQ_GIC_START },
 	{ .irq = -1 }
@@ -1479,48 +794,6 @@ static struct omap_hwmod_dma_info omap44xx_dss_dsi2_sdma_reqs[] = {
 	{ .dma_req = -1 }
 };
 
-static struct omap_hwmod_addr_space omap44xx_dss_dsi2_dma_addrs[] = {
-	{
-		.pa_start	= 0x58005000,
-		.pa_end		= 0x580051ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l3_main_2 -> dss_dsi2 */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_dsi2 = {
-	.master		= &omap44xx_l3_main_2_hwmod,
-	.slave		= &omap44xx_dss_dsi2_hwmod,
-	.clk		= "dss_fck",
-	.addr		= omap44xx_dss_dsi2_dma_addrs,
-	.user		= OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_addr_space omap44xx_dss_dsi2_addrs[] = {
-	{
-		.pa_start	= 0x48045000,
-		.pa_end		= 0x480451ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> dss_dsi2 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_dsi2 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_dss_dsi2_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_dss_dsi2_addrs,
-	.user		= OCP_USER_MPU,
-};
-
-/* dss_dsi2 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_dss_dsi2_slaves[] = {
-	&omap44xx_l3_main_2__dss_dsi2,
-	&omap44xx_l4_per__dss_dsi2,
-};
-
 static struct omap_hwmod_opt_clk dss_dsi2_opt_clks[] = {
 	{ .role = "sys_clk", .clk = "dss_sys_clk" },
 };
@@ -1540,8 +813,6 @@ static struct omap_hwmod omap44xx_dss_dsi2_hwmod = {
 	},
 	.opt_clks	= dss_dsi2_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(dss_dsi2_opt_clks),
-	.slaves		= omap44xx_dss_dsi2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_dss_dsi2_slaves),
 };
 
 /*
@@ -1565,7 +836,6 @@ static struct omap_hwmod_class omap44xx_hdmi_hwmod_class = {
 };
 
 /* dss_hdmi */
-static struct omap_hwmod omap44xx_dss_hdmi_hwmod;
 static struct omap_hwmod_irq_info omap44xx_dss_hdmi_irqs[] = {
 	{ .irq = 101 + OMAP44XX_IRQ_GIC_START },
 	{ .irq = -1 }
@@ -1576,48 +846,6 @@ static struct omap_hwmod_dma_info omap44xx_dss_hdmi_sdma_reqs[] = {
 	{ .dma_req = -1 }
 };
 
-static struct omap_hwmod_addr_space omap44xx_dss_hdmi_dma_addrs[] = {
-	{
-		.pa_start	= 0x58006000,
-		.pa_end		= 0x58006fff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l3_main_2 -> dss_hdmi */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_hdmi = {
-	.master		= &omap44xx_l3_main_2_hwmod,
-	.slave		= &omap44xx_dss_hdmi_hwmod,
-	.clk		= "dss_fck",
-	.addr		= omap44xx_dss_hdmi_dma_addrs,
-	.user		= OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_addr_space omap44xx_dss_hdmi_addrs[] = {
-	{
-		.pa_start	= 0x48046000,
-		.pa_end		= 0x48046fff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> dss_hdmi */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_hdmi = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_dss_hdmi_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_dss_hdmi_addrs,
-	.user		= OCP_USER_MPU,
-};
-
-/* dss_hdmi slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_dss_hdmi_slaves[] = {
-	&omap44xx_l3_main_2__dss_hdmi,
-	&omap44xx_l4_per__dss_hdmi,
-};
-
 static struct omap_hwmod_opt_clk dss_hdmi_opt_clks[] = {
 	{ .role = "sys_clk", .clk = "dss_sys_clk" },
 };
@@ -1637,8 +865,6 @@ static struct omap_hwmod omap44xx_dss_hdmi_hwmod = {
 	},
 	.opt_clks	= dss_hdmi_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(dss_hdmi_opt_clks),
-	.slaves		= omap44xx_dss_hdmi_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_dss_hdmi_slaves),
 };
 
 /*
@@ -1662,54 +888,11 @@ static struct omap_hwmod_class omap44xx_rfbi_hwmod_class = {
 };
 
 /* dss_rfbi */
-static struct omap_hwmod omap44xx_dss_rfbi_hwmod;
 static struct omap_hwmod_dma_info omap44xx_dss_rfbi_sdma_reqs[] = {
 	{ .dma_req = 13 + OMAP44XX_DMA_REQ_START },
 	{ .dma_req = -1 }
 };
 
-static struct omap_hwmod_addr_space omap44xx_dss_rfbi_dma_addrs[] = {
-	{
-		.pa_start	= 0x58002000,
-		.pa_end		= 0x580020ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l3_main_2 -> dss_rfbi */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_rfbi = {
-	.master		= &omap44xx_l3_main_2_hwmod,
-	.slave		= &omap44xx_dss_rfbi_hwmod,
-	.clk		= "dss_fck",
-	.addr		= omap44xx_dss_rfbi_dma_addrs,
-	.user		= OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_addr_space omap44xx_dss_rfbi_addrs[] = {
-	{
-		.pa_start	= 0x48042000,
-		.pa_end		= 0x480420ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> dss_rfbi */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_rfbi = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_dss_rfbi_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_dss_rfbi_addrs,
-	.user		= OCP_USER_MPU,
-};
-
-/* dss_rfbi slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_dss_rfbi_slaves[] = {
-	&omap44xx_l3_main_2__dss_rfbi,
-	&omap44xx_l4_per__dss_rfbi,
-};
-
 static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = {
 	{ .role = "ick", .clk = "dss_fck" },
 };
@@ -1728,8 +911,6 @@ static struct omap_hwmod omap44xx_dss_rfbi_hwmod = {
 	},
 	.opt_clks	= dss_rfbi_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(dss_rfbi_opt_clks),
-	.slaves		= omap44xx_dss_rfbi_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_dss_rfbi_slaves),
 };
 
 /*
@@ -1742,62 +923,165 @@ static struct omap_hwmod_class omap44xx_venc_hwmod_class = {
 };
 
 /* dss_venc */
-static struct omap_hwmod omap44xx_dss_venc_hwmod;
-static struct omap_hwmod_addr_space omap44xx_dss_venc_dma_addrs[] = {
-	{
-		.pa_start	= 0x58003000,
-		.pa_end		= 0x580030ff,
-		.flags		= ADDR_TYPE_RT
+static struct omap_hwmod omap44xx_dss_venc_hwmod = {
+	.name		= "dss_venc",
+	.class		= &omap44xx_venc_hwmod_class,
+	.clkdm_name	= "l3_dss_clkdm",
+	.main_clk	= "dss_tv_clk",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET,
+			.context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET,
+		},
 	},
-	{ }
 };
 
-/* l3_main_2 -> dss_venc */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_venc = {
-	.master		= &omap44xx_l3_main_2_hwmod,
-	.slave		= &omap44xx_dss_venc_hwmod,
-	.clk		= "dss_fck",
-	.addr		= omap44xx_dss_venc_dma_addrs,
-	.user		= OCP_USER_SDMA,
+/*
+ * 'elm' class
+ * bch error location module
+ */
+
+static struct omap_hwmod_class_sysconfig omap44xx_elm_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
+			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
+			   SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
 };
 
-static struct omap_hwmod_addr_space omap44xx_dss_venc_addrs[] = {
-	{
-		.pa_start	= 0x48043000,
-		.pa_end		= 0x480430ff,
-		.flags		= ADDR_TYPE_RT
+static struct omap_hwmod_class omap44xx_elm_hwmod_class = {
+	.name	= "elm",
+	.sysc	= &omap44xx_elm_sysc,
+};
+
+/* elm */
+static struct omap_hwmod_irq_info omap44xx_elm_irqs[] = {
+	{ .irq = 4 + OMAP44XX_IRQ_GIC_START },
+	{ .irq = -1 }
+};
+
+static struct omap_hwmod omap44xx_elm_hwmod = {
+	.name		= "elm",
+	.class		= &omap44xx_elm_hwmod_class,
+	.clkdm_name	= "l4_per_clkdm",
+	.mpu_irqs	= omap44xx_elm_irqs,
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = OMAP4_CM_L4PER_ELM_CLKCTRL_OFFSET,
+			.context_offs = OMAP4_RM_L4PER_ELM_CONTEXT_OFFSET,
+		},
 	},
-	{ }
 };
 
-/* l4_per -> dss_venc */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_venc = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_dss_venc_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_dss_venc_addrs,
-	.user		= OCP_USER_MPU,
+/*
+ * 'emif' class
+ * external memory interface no1
+ */
+
+static struct omap_hwmod_class_sysconfig omap44xx_emif_sysc = {
+	.rev_offs	= 0x0000,
 };
 
-/* dss_venc slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_dss_venc_slaves[] = {
-	&omap44xx_l3_main_2__dss_venc,
-	&omap44xx_l4_per__dss_venc,
+static struct omap_hwmod_class omap44xx_emif_hwmod_class = {
+	.name	= "emif",
+	.sysc	= &omap44xx_emif_sysc,
 };
 
-static struct omap_hwmod omap44xx_dss_venc_hwmod = {
-	.name		= "dss_venc",
-	.class		= &omap44xx_venc_hwmod_class,
-	.clkdm_name	= "l3_dss_clkdm",
-	.main_clk	= "dss_tv_clk",
+/* emif1 */
+static struct omap_hwmod_irq_info omap44xx_emif1_irqs[] = {
+	{ .irq = 110 + OMAP44XX_IRQ_GIC_START },
+	{ .irq = -1 }
+};
+
+static struct omap_hwmod omap44xx_emif1_hwmod = {
+	.name		= "emif1",
+	.class		= &omap44xx_emif_hwmod_class,
+	.clkdm_name	= "l3_emif_clkdm",
+	.flags		= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET,
+	.mpu_irqs	= omap44xx_emif1_irqs,
+	.main_clk	= "ddrphy_ck",
 	.prcm = {
 		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET,
+			.clkctrl_offs = OMAP4_CM_MEMIF_EMIF_1_CLKCTRL_OFFSET,
+			.context_offs = OMAP4_RM_MEMIF_EMIF_1_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
+};
+
+/* emif2 */
+static struct omap_hwmod_irq_info omap44xx_emif2_irqs[] = {
+	{ .irq = 111 + OMAP44XX_IRQ_GIC_START },
+	{ .irq = -1 }
+};
+
+static struct omap_hwmod omap44xx_emif2_hwmod = {
+	.name		= "emif2",
+	.class		= &omap44xx_emif_hwmod_class,
+	.clkdm_name	= "l3_emif_clkdm",
+	.flags		= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET,
+	.mpu_irqs	= omap44xx_emif2_irqs,
+	.main_clk	= "ddrphy_ck",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = OMAP4_CM_MEMIF_EMIF_2_CLKCTRL_OFFSET,
+			.context_offs = OMAP4_RM_MEMIF_EMIF_2_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
+};
+
+/*
+ * 'fdif' class
+ * face detection hw accelerator module
+ */
+
+static struct omap_hwmod_class_sysconfig omap44xx_fdif_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	/*
+	 * FDIF needs 100 OCP clk cycles delay after a softreset before
+	 * accessing sysconfig again.
+	 * The lowest frequency at the moment for L3 bus is 100 MHz, so
+	 * 1usec delay is needed. Add an x2 margin to be safe (2 usecs).
+	 *
+	 * TODO: Indicate errata when available.
+	 */
+	.srst_udelay	= 2,
+	.sysc_flags	= (SYSC_HAS_MIDLEMODE | SYSC_HAS_RESET_STATUS |
+			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class omap44xx_fdif_hwmod_class = {
+	.name	= "fdif",
+	.sysc	= &omap44xx_fdif_sysc,
+};
+
+/* fdif */
+static struct omap_hwmod_irq_info omap44xx_fdif_irqs[] = {
+	{ .irq = 69 + OMAP44XX_IRQ_GIC_START },
+	{ .irq = -1 }
+};
+
+static struct omap_hwmod omap44xx_fdif_hwmod = {
+	.name		= "fdif",
+	.class		= &omap44xx_fdif_hwmod_class,
+	.clkdm_name	= "iss_clkdm",
+	.mpu_irqs	= omap44xx_fdif_irqs,
+	.main_clk	= "fdif_fck",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = OMAP4_CM_CAM_FDIF_CLKCTRL_OFFSET,
+			.context_offs = OMAP4_RM_CAM_FDIF_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.slaves		= omap44xx_dss_venc_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_dss_venc_slaves),
 };
 
 /*
@@ -1830,35 +1114,11 @@ static struct omap_gpio_dev_attr gpio_dev_attr = {
 };
 
 /* gpio1 */
-static struct omap_hwmod omap44xx_gpio1_hwmod;
 static struct omap_hwmod_irq_info omap44xx_gpio1_irqs[] = {
 	{ .irq = 29 + OMAP44XX_IRQ_GIC_START },
 	{ .irq = -1 }
 };
 
-static struct omap_hwmod_addr_space omap44xx_gpio1_addrs[] = {
-	{
-		.pa_start	= 0x4a310000,
-		.pa_end		= 0x4a3101ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_wkup -> gpio1 */
-static struct omap_hwmod_ocp_if omap44xx_l4_wkup__gpio1 = {
-	.master		= &omap44xx_l4_wkup_hwmod,
-	.slave		= &omap44xx_gpio1_hwmod,
-	.clk		= "l4_wkup_clk_mux_ck",
-	.addr		= omap44xx_gpio1_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* gpio1 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_gpio1_slaves[] = {
-	&omap44xx_l4_wkup__gpio1,
-};
-
 static struct omap_hwmod_opt_clk gpio1_opt_clks[] = {
 	{ .role = "dbclk", .clk = "gpio1_dbclk" },
 };
@@ -1879,40 +1139,14 @@ static struct omap_hwmod omap44xx_gpio1_hwmod = {
 	.opt_clks	= gpio1_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(gpio1_opt_clks),
 	.dev_attr	= &gpio_dev_attr,
-	.slaves		= omap44xx_gpio1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_gpio1_slaves),
 };
 
 /* gpio2 */
-static struct omap_hwmod omap44xx_gpio2_hwmod;
 static struct omap_hwmod_irq_info omap44xx_gpio2_irqs[] = {
 	{ .irq = 30 + OMAP44XX_IRQ_GIC_START },
 	{ .irq = -1 }
 };
 
-static struct omap_hwmod_addr_space omap44xx_gpio2_addrs[] = {
-	{
-		.pa_start	= 0x48055000,
-		.pa_end		= 0x480551ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> gpio2 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio2 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_gpio2_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_gpio2_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* gpio2 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_gpio2_slaves[] = {
-	&omap44xx_l4_per__gpio2,
-};
-
 static struct omap_hwmod_opt_clk gpio2_opt_clks[] = {
 	{ .role = "dbclk", .clk = "gpio2_dbclk" },
 };
@@ -1934,40 +1168,14 @@ static struct omap_hwmod omap44xx_gpio2_hwmod = {
 	.opt_clks	= gpio2_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(gpio2_opt_clks),
 	.dev_attr	= &gpio_dev_attr,
-	.slaves		= omap44xx_gpio2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_gpio2_slaves),
 };
 
 /* gpio3 */
-static struct omap_hwmod omap44xx_gpio3_hwmod;
 static struct omap_hwmod_irq_info omap44xx_gpio3_irqs[] = {
 	{ .irq = 31 + OMAP44XX_IRQ_GIC_START },
 	{ .irq = -1 }
 };
 
-static struct omap_hwmod_addr_space omap44xx_gpio3_addrs[] = {
-	{
-		.pa_start	= 0x48057000,
-		.pa_end		= 0x480571ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> gpio3 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio3 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_gpio3_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_gpio3_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* gpio3 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_gpio3_slaves[] = {
-	&omap44xx_l4_per__gpio3,
-};
-
 static struct omap_hwmod_opt_clk gpio3_opt_clks[] = {
 	{ .role = "dbclk", .clk = "gpio3_dbclk" },
 };
@@ -1989,40 +1197,14 @@ static struct omap_hwmod omap44xx_gpio3_hwmod = {
 	.opt_clks	= gpio3_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(gpio3_opt_clks),
 	.dev_attr	= &gpio_dev_attr,
-	.slaves		= omap44xx_gpio3_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_gpio3_slaves),
 };
 
 /* gpio4 */
-static struct omap_hwmod omap44xx_gpio4_hwmod;
 static struct omap_hwmod_irq_info omap44xx_gpio4_irqs[] = {
 	{ .irq = 32 + OMAP44XX_IRQ_GIC_START },
 	{ .irq = -1 }
 };
 
-static struct omap_hwmod_addr_space omap44xx_gpio4_addrs[] = {
-	{
-		.pa_start	= 0x48059000,
-		.pa_end		= 0x480591ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> gpio4 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio4 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_gpio4_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_gpio4_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* gpio4 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_gpio4_slaves[] = {
-	&omap44xx_l4_per__gpio4,
-};
-
 static struct omap_hwmod_opt_clk gpio4_opt_clks[] = {
 	{ .role = "dbclk", .clk = "gpio4_dbclk" },
 };
@@ -2044,40 +1226,14 @@ static struct omap_hwmod omap44xx_gpio4_hwmod = {
 	.opt_clks	= gpio4_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(gpio4_opt_clks),
 	.dev_attr	= &gpio_dev_attr,
-	.slaves		= omap44xx_gpio4_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_gpio4_slaves),
 };
 
 /* gpio5 */
-static struct omap_hwmod omap44xx_gpio5_hwmod;
 static struct omap_hwmod_irq_info omap44xx_gpio5_irqs[] = {
 	{ .irq = 33 + OMAP44XX_IRQ_GIC_START },
 	{ .irq = -1 }
 };
 
-static struct omap_hwmod_addr_space omap44xx_gpio5_addrs[] = {
-	{
-		.pa_start	= 0x4805b000,
-		.pa_end		= 0x4805b1ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> gpio5 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio5 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_gpio5_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_gpio5_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* gpio5 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_gpio5_slaves[] = {
-	&omap44xx_l4_per__gpio5,
-};
-
 static struct omap_hwmod_opt_clk gpio5_opt_clks[] = {
 	{ .role = "dbclk", .clk = "gpio5_dbclk" },
 };
@@ -2099,40 +1255,14 @@ static struct omap_hwmod omap44xx_gpio5_hwmod = {
 	.opt_clks	= gpio5_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(gpio5_opt_clks),
 	.dev_attr	= &gpio_dev_attr,
-	.slaves		= omap44xx_gpio5_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_gpio5_slaves),
 };
 
 /* gpio6 */
-static struct omap_hwmod omap44xx_gpio6_hwmod;
 static struct omap_hwmod_irq_info omap44xx_gpio6_irqs[] = {
 	{ .irq = 34 + OMAP44XX_IRQ_GIC_START },
 	{ .irq = -1 }
 };
 
-static struct omap_hwmod_addr_space omap44xx_gpio6_addrs[] = {
-	{
-		.pa_start	= 0x4805d000,
-		.pa_end		= 0x4805d1ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> gpio6 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio6 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_gpio6_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_gpio6_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* gpio6 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_gpio6_slaves[] = {
-	&omap44xx_l4_per__gpio6,
-};
-
 static struct omap_hwmod_opt_clk gpio6_opt_clks[] = {
 	{ .role = "dbclk", .clk = "gpio6_dbclk" },
 };
@@ -2154,8 +1284,135 @@ static struct omap_hwmod omap44xx_gpio6_hwmod = {
 	.opt_clks	= gpio6_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(gpio6_opt_clks),
 	.dev_attr	= &gpio_dev_attr,
-	.slaves		= omap44xx_gpio6_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_gpio6_slaves),
+};
+
+/*
+ * 'gpmc' class
+ * general purpose memory controller
+ */
+
+static struct omap_hwmod_class_sysconfig omap44xx_gpmc_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap44xx_gpmc_hwmod_class = {
+	.name	= "gpmc",
+	.sysc	= &omap44xx_gpmc_sysc,
+};
+
+/* gpmc */
+static struct omap_hwmod_irq_info omap44xx_gpmc_irqs[] = {
+	{ .irq = 20 + OMAP44XX_IRQ_GIC_START },
+	{ .irq = -1 }
+};
+
+static struct omap_hwmod_dma_info omap44xx_gpmc_sdma_reqs[] = {
+	{ .dma_req = 3 + OMAP44XX_DMA_REQ_START },
+	{ .dma_req = -1 }
+};
+
+static struct omap_hwmod omap44xx_gpmc_hwmod = {
+	.name		= "gpmc",
+	.class		= &omap44xx_gpmc_hwmod_class,
+	.clkdm_name	= "l3_2_clkdm",
+	.flags		= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET,
+	.mpu_irqs	= omap44xx_gpmc_irqs,
+	.sdma_reqs	= omap44xx_gpmc_sdma_reqs,
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = OMAP4_CM_L3_2_GPMC_CLKCTRL_OFFSET,
+			.context_offs = OMAP4_RM_L3_2_GPMC_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
+};
+
+/*
+ * 'gpu' class
+ * 2d/3d graphics accelerator
+ */
+
+static struct omap_hwmod_class_sysconfig omap44xx_gpu_sysc = {
+	.rev_offs	= 0x1fc00,
+	.sysc_offs	= 0x1fc10,
+	.sysc_flags	= (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
+			   MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class omap44xx_gpu_hwmod_class = {
+	.name	= "gpu",
+	.sysc	= &omap44xx_gpu_sysc,
+};
+
+/* gpu */
+static struct omap_hwmod_irq_info omap44xx_gpu_irqs[] = {
+	{ .irq = 21 + OMAP44XX_IRQ_GIC_START },
+	{ .irq = -1 }
+};
+
+static struct omap_hwmod omap44xx_gpu_hwmod = {
+	.name		= "gpu",
+	.class		= &omap44xx_gpu_hwmod_class,
+	.clkdm_name	= "l3_gfx_clkdm",
+	.mpu_irqs	= omap44xx_gpu_irqs,
+	.main_clk	= "gpu_fck",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = OMAP4_CM_GFX_GFX_CLKCTRL_OFFSET,
+			.context_offs = OMAP4_RM_GFX_GFX_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/*
+ * 'hdq1w' class
+ * hdq / 1-wire serial interface controller
+ */
+
+static struct omap_hwmod_class_sysconfig omap44xx_hdq1w_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0014,
+	.syss_offs	= 0x0018,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_SOFTRESET |
+			   SYSS_HAS_RESET_STATUS),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap44xx_hdq1w_hwmod_class = {
+	.name	= "hdq1w",
+	.sysc	= &omap44xx_hdq1w_sysc,
+};
+
+/* hdq1w */
+static struct omap_hwmod_irq_info omap44xx_hdq1w_irqs[] = {
+	{ .irq = 58 + OMAP44XX_IRQ_GIC_START },
+	{ .irq = -1 }
+};
+
+static struct omap_hwmod omap44xx_hdq1w_hwmod = {
+	.name		= "hdq1w",
+	.class		= &omap44xx_hdq1w_hwmod_class,
+	.clkdm_name	= "l4_per_clkdm",
+	.flags		= HWMOD_INIT_NO_RESET, /* XXX temporary */
+	.mpu_irqs	= omap44xx_hdq1w_irqs,
+	.main_clk	= "hdq1w_fck",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = OMAP4_CM_L4PER_HDQ1W_CLKCTRL_OFFSET,
+			.context_offs = OMAP4_RM_L4PER_HDQ1W_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
 };
 
 /*
@@ -2190,34 +1447,6 @@ static struct omap_hwmod_irq_info omap44xx_hsi_irqs[] = {
 	{ .irq = -1 }
 };
 
-/* hsi master ports */
-static struct omap_hwmod_ocp_if *omap44xx_hsi_masters[] = {
-	&omap44xx_hsi__l3_main_2,
-};
-
-static struct omap_hwmod_addr_space omap44xx_hsi_addrs[] = {
-	{
-		.pa_start	= 0x4a058000,
-		.pa_end		= 0x4a05bfff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_cfg -> hsi */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__hsi = {
-	.master		= &omap44xx_l4_cfg_hwmod,
-	.slave		= &omap44xx_hsi_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_hsi_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* hsi slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_hsi_slaves[] = {
-	&omap44xx_l4_cfg__hsi,
-};
-
 static struct omap_hwmod omap44xx_hsi_hwmod = {
 	.name		= "hsi",
 	.class		= &omap44xx_hsi_hwmod_class,
@@ -2231,10 +1460,6 @@ static struct omap_hwmod omap44xx_hsi_hwmod = {
 			.modulemode   = MODULEMODE_HWCTRL,
 		},
 	},
-	.slaves		= omap44xx_hsi_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_hsi_slaves),
-	.masters	= omap44xx_hsi_masters,
-	.masters_cnt	= ARRAY_SIZE(omap44xx_hsi_masters),
 };
 
 /*
@@ -2262,11 +1487,11 @@ static struct omap_hwmod_class omap44xx_i2c_hwmod_class = {
 };
 
 static struct omap_i2c_dev_attr i2c_dev_attr = {
-	.flags	= OMAP_I2C_FLAG_BUS_SHIFT_NONE,
+	.flags	= OMAP_I2C_FLAG_BUS_SHIFT_NONE |
+			OMAP_I2C_FLAG_RESET_REGS_POSTIDLE,
 };
 
 /* i2c1 */
-static struct omap_hwmod omap44xx_i2c1_hwmod;
 static struct omap_hwmod_irq_info omap44xx_i2c1_irqs[] = {
 	{ .irq = 56 + OMAP44XX_IRQ_GIC_START },
 	{ .irq = -1 }
@@ -2278,29 +1503,6 @@ static struct omap_hwmod_dma_info omap44xx_i2c1_sdma_reqs[] = {
 	{ .dma_req = -1 }
 };
 
-static struct omap_hwmod_addr_space omap44xx_i2c1_addrs[] = {
-	{
-		.pa_start	= 0x48070000,
-		.pa_end		= 0x480700ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> i2c1 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__i2c1 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_i2c1_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_i2c1_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* i2c1 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_i2c1_slaves[] = {
-	&omap44xx_l4_per__i2c1,
-};
-
 static struct omap_hwmod omap44xx_i2c1_hwmod = {
 	.name		= "i2c1",
 	.class		= &omap44xx_i2c_hwmod_class,
@@ -2316,13 +1518,10 @@ static struct omap_hwmod omap44xx_i2c1_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.slaves		= omap44xx_i2c1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_i2c1_slaves),
 	.dev_attr	= &i2c_dev_attr,
 };
 
 /* i2c2 */
-static struct omap_hwmod omap44xx_i2c2_hwmod;
 static struct omap_hwmod_irq_info omap44xx_i2c2_irqs[] = {
 	{ .irq = 57 + OMAP44XX_IRQ_GIC_START },
 	{ .irq = -1 }
@@ -2334,29 +1533,6 @@ static struct omap_hwmod_dma_info omap44xx_i2c2_sdma_reqs[] = {
 	{ .dma_req = -1 }
 };
 
-static struct omap_hwmod_addr_space omap44xx_i2c2_addrs[] = {
-	{
-		.pa_start	= 0x48072000,
-		.pa_end		= 0x480720ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> i2c2 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__i2c2 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_i2c2_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_i2c2_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* i2c2 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_i2c2_slaves[] = {
-	&omap44xx_l4_per__i2c2,
-};
-
 static struct omap_hwmod omap44xx_i2c2_hwmod = {
 	.name		= "i2c2",
 	.class		= &omap44xx_i2c_hwmod_class,
@@ -2372,13 +1548,10 @@ static struct omap_hwmod omap44xx_i2c2_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.slaves		= omap44xx_i2c2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_i2c2_slaves),
 	.dev_attr	= &i2c_dev_attr,
 };
 
 /* i2c3 */
-static struct omap_hwmod omap44xx_i2c3_hwmod;
 static struct omap_hwmod_irq_info omap44xx_i2c3_irqs[] = {
 	{ .irq = 61 + OMAP44XX_IRQ_GIC_START },
 	{ .irq = -1 }
@@ -2390,29 +1563,6 @@ static struct omap_hwmod_dma_info omap44xx_i2c3_sdma_reqs[] = {
 	{ .dma_req = -1 }
 };
 
-static struct omap_hwmod_addr_space omap44xx_i2c3_addrs[] = {
-	{
-		.pa_start	= 0x48060000,
-		.pa_end		= 0x480600ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> i2c3 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__i2c3 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_i2c3_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_i2c3_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* i2c3 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_i2c3_slaves[] = {
-	&omap44xx_l4_per__i2c3,
-};
-
 static struct omap_hwmod omap44xx_i2c3_hwmod = {
 	.name		= "i2c3",
 	.class		= &omap44xx_i2c_hwmod_class,
@@ -2428,13 +1578,10 @@ static struct omap_hwmod omap44xx_i2c3_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.slaves		= omap44xx_i2c3_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_i2c3_slaves),
 	.dev_attr	= &i2c_dev_attr,
 };
 
 /* i2c4 */
-static struct omap_hwmod omap44xx_i2c4_hwmod;
 static struct omap_hwmod_irq_info omap44xx_i2c4_irqs[] = {
 	{ .irq = 62 + OMAP44XX_IRQ_GIC_START },
 	{ .irq = -1 }
@@ -2446,29 +1593,6 @@ static struct omap_hwmod_dma_info omap44xx_i2c4_sdma_reqs[] = {
 	{ .dma_req = -1 }
 };
 
-static struct omap_hwmod_addr_space omap44xx_i2c4_addrs[] = {
-	{
-		.pa_start	= 0x48350000,
-		.pa_end		= 0x483500ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> i2c4 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__i2c4 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_i2c4_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_i2c4_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* i2c4 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_i2c4_slaves[] = {
-	&omap44xx_l4_per__i2c4,
-};
-
 static struct omap_hwmod omap44xx_i2c4_hwmod = {
 	.name		= "i2c4",
 	.class		= &omap44xx_i2c_hwmod_class,
@@ -2484,8 +1608,6 @@ static struct omap_hwmod omap44xx_i2c4_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.slaves		= omap44xx_i2c4_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_i2c4_slaves),
 	.dev_attr	= &i2c_dev_attr,
 };
 
@@ -2504,66 +1626,12 @@ static struct omap_hwmod_irq_info omap44xx_ipu_irqs[] = {
 	{ .irq = -1 }
 };
 
-static struct omap_hwmod_rst_info omap44xx_ipu_c0_resets[] = {
+static struct omap_hwmod_rst_info omap44xx_ipu_resets[] = {
 	{ .name = "cpu0", .rst_shift = 0 },
-};
-
-static struct omap_hwmod_rst_info omap44xx_ipu_c1_resets[] = {
 	{ .name = "cpu1", .rst_shift = 1 },
-};
-
-static struct omap_hwmod_rst_info omap44xx_ipu_resets[] = {
 	{ .name = "mmu_cache", .rst_shift = 2 },
 };
 
-/* ipu master ports */
-static struct omap_hwmod_ocp_if *omap44xx_ipu_masters[] = {
-	&omap44xx_ipu__l3_main_2,
-};
-
-/* l3_main_2 -> ipu */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__ipu = {
-	.master		= &omap44xx_l3_main_2_hwmod,
-	.slave		= &omap44xx_ipu_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* ipu slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_ipu_slaves[] = {
-	&omap44xx_l3_main_2__ipu,
-};
-
-/* Pseudo hwmod for reset control purpose only */
-static struct omap_hwmod omap44xx_ipu_c0_hwmod = {
-	.name		= "ipu_c0",
-	.class		= &omap44xx_ipu_hwmod_class,
-	.clkdm_name	= "ducati_clkdm",
-	.flags		= HWMOD_INIT_NO_RESET,
-	.rst_lines	= omap44xx_ipu_c0_resets,
-	.rst_lines_cnt	= ARRAY_SIZE(omap44xx_ipu_c0_resets),
-	.prcm = {
-		.omap4 = {
-			.rstctrl_offs = OMAP4_RM_DUCATI_RSTCTRL_OFFSET,
-		},
-	},
-};
-
-/* Pseudo hwmod for reset control purpose only */
-static struct omap_hwmod omap44xx_ipu_c1_hwmod = {
-	.name		= "ipu_c1",
-	.class		= &omap44xx_ipu_hwmod_class,
-	.clkdm_name	= "ducati_clkdm",
-	.flags		= HWMOD_INIT_NO_RESET,
-	.rst_lines	= omap44xx_ipu_c1_resets,
-	.rst_lines_cnt	= ARRAY_SIZE(omap44xx_ipu_c1_resets),
-	.prcm = {
-		.omap4 = {
-			.rstctrl_offs = OMAP4_RM_DUCATI_RSTCTRL_OFFSET,
-		},
-	},
-};
-
 static struct omap_hwmod omap44xx_ipu_hwmod = {
 	.name		= "ipu",
 	.class		= &omap44xx_ipu_hwmod_class,
@@ -2580,10 +1648,6 @@ static struct omap_hwmod omap44xx_ipu_hwmod = {
 			.modulemode   = MODULEMODE_HWCTRL,
 		},
 	},
-	.slaves		= omap44xx_ipu_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_ipu_slaves),
-	.masters	= omap44xx_ipu_masters,
-	.masters_cnt	= ARRAY_SIZE(omap44xx_ipu_masters),
 };
 
 /*
@@ -2594,6 +1658,15 @@ static struct omap_hwmod omap44xx_ipu_hwmod = {
 static struct omap_hwmod_class_sysconfig omap44xx_iss_sysc = {
 	.rev_offs	= 0x0000,
 	.sysc_offs	= 0x0010,
+	/*
+	 * ISS needs 100 OCP clk cycles delay after a softreset before
+	 * accessing sysconfig again.
+	 * The lowest frequency at the moment for L3 bus is 100 MHz, so
+	 * 1usec delay is needed. Add an x2 margin to be safe (2 usecs).
+	 *
+	 * TODO: Indicate errata when available.
+	 */
+	.srst_udelay	= 2,
 	.sysc_flags	= (SYSC_HAS_MIDLEMODE | SYSC_HAS_RESET_STATUS |
 			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
 	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
@@ -2621,34 +1694,6 @@ static struct omap_hwmod_dma_info omap44xx_iss_sdma_reqs[] = {
 	{ .dma_req = -1 }
 };
 
-/* iss master ports */
-static struct omap_hwmod_ocp_if *omap44xx_iss_masters[] = {
-	&omap44xx_iss__l3_main_2,
-};
-
-static struct omap_hwmod_addr_space omap44xx_iss_addrs[] = {
-	{
-		.pa_start	= 0x52000000,
-		.pa_end		= 0x520000ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l3_main_2 -> iss */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__iss = {
-	.master		= &omap44xx_l3_main_2_hwmod,
-	.slave		= &omap44xx_iss_hwmod,
-	.clk		= "l3_div_ck",
-	.addr		= omap44xx_iss_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* iss slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_iss_slaves[] = {
-	&omap44xx_l3_main_2__iss,
-};
-
 static struct omap_hwmod_opt_clk iss_opt_clks[] = {
 	{ .role = "ctrlclk", .clk = "iss_ctrlclk" },
 };
@@ -2669,10 +1714,6 @@ static struct omap_hwmod omap44xx_iss_hwmod = {
 	},
 	.opt_clks	= iss_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(iss_opt_clks),
-	.slaves		= omap44xx_iss_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_iss_slaves),
-	.masters	= omap44xx_iss_masters,
-	.masters_cnt	= ARRAY_SIZE(omap44xx_iss_masters),
 };
 
 /*
@@ -2693,75 +1734,9 @@ static struct omap_hwmod_irq_info omap44xx_iva_irqs[] = {
 };
 
 static struct omap_hwmod_rst_info omap44xx_iva_resets[] = {
-	{ .name = "logic", .rst_shift = 2 },
-};
-
-static struct omap_hwmod_rst_info omap44xx_iva_seq0_resets[] = {
 	{ .name = "seq0", .rst_shift = 0 },
-};
-
-static struct omap_hwmod_rst_info omap44xx_iva_seq1_resets[] = {
 	{ .name = "seq1", .rst_shift = 1 },
-};
-
-/* iva master ports */
-static struct omap_hwmod_ocp_if *omap44xx_iva_masters[] = {
-	&omap44xx_iva__l3_main_2,
-	&omap44xx_iva__l3_instr,
-};
-
-static struct omap_hwmod_addr_space omap44xx_iva_addrs[] = {
-	{
-		.pa_start	= 0x5a000000,
-		.pa_end		= 0x5a07ffff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l3_main_2 -> iva */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__iva = {
-	.master		= &omap44xx_l3_main_2_hwmod,
-	.slave		= &omap44xx_iva_hwmod,
-	.clk		= "l3_div_ck",
-	.addr		= omap44xx_iva_addrs,
-	.user		= OCP_USER_MPU,
-};
-
-/* iva slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_iva_slaves[] = {
-	&omap44xx_dsp__iva,
-	&omap44xx_l3_main_2__iva,
-};
-
-/* Pseudo hwmod for reset control purpose only */
-static struct omap_hwmod omap44xx_iva_seq0_hwmod = {
-	.name		= "iva_seq0",
-	.class		= &omap44xx_iva_hwmod_class,
-	.clkdm_name	= "ivahd_clkdm",
-	.flags		= HWMOD_INIT_NO_RESET,
-	.rst_lines	= omap44xx_iva_seq0_resets,
-	.rst_lines_cnt	= ARRAY_SIZE(omap44xx_iva_seq0_resets),
-	.prcm = {
-		.omap4 = {
-			.rstctrl_offs = OMAP4_RM_IVAHD_RSTCTRL_OFFSET,
-		},
-	},
-};
-
-/* Pseudo hwmod for reset control purpose only */
-static struct omap_hwmod omap44xx_iva_seq1_hwmod = {
-	.name		= "iva_seq1",
-	.class		= &omap44xx_iva_hwmod_class,
-	.clkdm_name	= "ivahd_clkdm",
-	.flags		= HWMOD_INIT_NO_RESET,
-	.rst_lines	= omap44xx_iva_seq1_resets,
-	.rst_lines_cnt	= ARRAY_SIZE(omap44xx_iva_seq1_resets),
-	.prcm = {
-		.omap4 = {
-			.rstctrl_offs = OMAP4_RM_IVAHD_RSTCTRL_OFFSET,
-		},
-	},
+	{ .name = "logic", .rst_shift = 2 },
 };
 
 static struct omap_hwmod omap44xx_iva_hwmod = {
@@ -2780,10 +1755,6 @@ static struct omap_hwmod omap44xx_iva_hwmod = {
 			.modulemode   = MODULEMODE_HWCTRL,
 		},
 	},
-	.slaves		= omap44xx_iva_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_iva_slaves),
-	.masters	= omap44xx_iva_masters,
-	.masters_cnt	= ARRAY_SIZE(omap44xx_iva_masters),
 };
 
 /*
@@ -2809,35 +1780,11 @@ static struct omap_hwmod_class omap44xx_kbd_hwmod_class = {
 };
 
 /* kbd */
-static struct omap_hwmod omap44xx_kbd_hwmod;
 static struct omap_hwmod_irq_info omap44xx_kbd_irqs[] = {
 	{ .irq = 120 + OMAP44XX_IRQ_GIC_START },
 	{ .irq = -1 }
 };
 
-static struct omap_hwmod_addr_space omap44xx_kbd_addrs[] = {
-	{
-		.pa_start	= 0x4a31c000,
-		.pa_end		= 0x4a31c07f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_wkup -> kbd */
-static struct omap_hwmod_ocp_if omap44xx_l4_wkup__kbd = {
-	.master		= &omap44xx_l4_wkup_hwmod,
-	.slave		= &omap44xx_kbd_hwmod,
-	.clk		= "l4_wkup_clk_mux_ck",
-	.addr		= omap44xx_kbd_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* kbd slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_kbd_slaves[] = {
-	&omap44xx_l4_wkup__kbd,
-};
-
 static struct omap_hwmod omap44xx_kbd_hwmod = {
 	.name		= "kbd",
 	.class		= &omap44xx_kbd_hwmod_class,
@@ -2851,8 +1798,6 @@ static struct omap_hwmod omap44xx_kbd_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.slaves		= omap44xx_kbd_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_kbd_slaves),
 };
 
 /*
@@ -2876,35 +1821,11 @@ static struct omap_hwmod_class omap44xx_mailbox_hwmod_class = {
 };
 
 /* mailbox */
-static struct omap_hwmod omap44xx_mailbox_hwmod;
 static struct omap_hwmod_irq_info omap44xx_mailbox_irqs[] = {
 	{ .irq = 26 + OMAP44XX_IRQ_GIC_START },
 	{ .irq = -1 }
 };
 
-static struct omap_hwmod_addr_space omap44xx_mailbox_addrs[] = {
-	{
-		.pa_start	= 0x4a0f4000,
-		.pa_end		= 0x4a0f41ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_cfg -> mailbox */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__mailbox = {
-	.master		= &omap44xx_l4_cfg_hwmod,
-	.slave		= &omap44xx_mailbox_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_mailbox_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mailbox slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_mailbox_slaves[] = {
-	&omap44xx_l4_cfg__mailbox,
-};
-
 static struct omap_hwmod omap44xx_mailbox_hwmod = {
 	.name		= "mailbox",
 	.class		= &omap44xx_mailbox_hwmod_class,
@@ -2916,8 +1837,58 @@ static struct omap_hwmod omap44xx_mailbox_hwmod = {
 			.context_offs = OMAP4_RM_L4CFG_MAILBOX_CONTEXT_OFFSET,
 		},
 	},
-	.slaves		= omap44xx_mailbox_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_mailbox_slaves),
+};
+
+/*
+ * 'mcasp' class
+ * multi-channel audio serial port controller
+ */
+
+/* The IP is not compliant to type1 / type2 scheme */
+static struct omap_hwmod_sysc_fields omap_hwmod_sysc_type_mcasp = {
+	.sidle_shift	= 0,
+};
+
+static struct omap_hwmod_class_sysconfig omap44xx_mcasp_sysc = {
+	.sysc_offs	= 0x0004,
+	.sysc_flags	= SYSC_HAS_SIDLEMODE,
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type_mcasp,
+};
+
+static struct omap_hwmod_class omap44xx_mcasp_hwmod_class = {
+	.name	= "mcasp",
+	.sysc	= &omap44xx_mcasp_sysc,
+};
+
+/* mcasp */
+static struct omap_hwmod_irq_info omap44xx_mcasp_irqs[] = {
+	{ .name = "arevt", .irq = 108 + OMAP44XX_IRQ_GIC_START },
+	{ .name = "axevt", .irq = 109 + OMAP44XX_IRQ_GIC_START },
+	{ .irq = -1 }
+};
+
+static struct omap_hwmod_dma_info omap44xx_mcasp_sdma_reqs[] = {
+	{ .name = "axevt", .dma_req = 7 + OMAP44XX_DMA_REQ_START },
+	{ .name = "arevt", .dma_req = 10 + OMAP44XX_DMA_REQ_START },
+	{ .dma_req = -1 }
+};
+
+static struct omap_hwmod omap44xx_mcasp_hwmod = {
+	.name		= "mcasp",
+	.class		= &omap44xx_mcasp_hwmod_class,
+	.clkdm_name	= "abe_clkdm",
+	.mpu_irqs	= omap44xx_mcasp_irqs,
+	.sdma_reqs	= omap44xx_mcasp_sdma_reqs,
+	.main_clk	= "mcasp_fck",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = OMAP4_CM1_ABE_MCASP_CLKCTRL_OFFSET,
+			.context_offs = OMAP4_RM_ABE_MCASP_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
 };
 
 /*
@@ -2940,9 +1911,8 @@ static struct omap_hwmod_class omap44xx_mcbsp_hwmod_class = {
 };
 
 /* mcbsp1 */
-static struct omap_hwmod omap44xx_mcbsp1_hwmod;
 static struct omap_hwmod_irq_info omap44xx_mcbsp1_irqs[] = {
-	{ .irq = 17 + OMAP44XX_IRQ_GIC_START },
+	{ .name = "common", .irq = 17 + OMAP44XX_IRQ_GIC_START },
 	{ .irq = -1 }
 };
 
@@ -2952,48 +1922,9 @@ static struct omap_hwmod_dma_info omap44xx_mcbsp1_sdma_reqs[] = {
 	{ .dma_req = -1 }
 };
 
-static struct omap_hwmod_addr_space omap44xx_mcbsp1_addrs[] = {
-	{
-		.name		= "mpu",
-		.pa_start	= 0x40122000,
-		.pa_end		= 0x401220ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_abe -> mcbsp1 */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp1 = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_mcbsp1_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.addr		= omap44xx_mcbsp1_addrs,
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_addr_space omap44xx_mcbsp1_dma_addrs[] = {
-	{
-		.name		= "dma",
-		.pa_start	= 0x49022000,
-		.pa_end		= 0x490220ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_abe -> mcbsp1 (dma) */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp1_dma = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_mcbsp1_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.addr		= omap44xx_mcbsp1_dma_addrs,
-	.user		= OCP_USER_SDMA,
-};
-
-/* mcbsp1 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_mcbsp1_slaves[] = {
-	&omap44xx_l4_abe__mcbsp1,
-	&omap44xx_l4_abe__mcbsp1_dma,
+static struct omap_hwmod_opt_clk mcbsp1_opt_clks[] = {
+	{ .role = "pad_fck", .clk = "pad_clks_ck" },
+	{ .role = "prcm_clk", .clk = "mcbsp1_sync_mux_ck" },
 };
 
 static struct omap_hwmod omap44xx_mcbsp1_hwmod = {
@@ -3010,14 +1941,13 @@ static struct omap_hwmod omap44xx_mcbsp1_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.slaves		= omap44xx_mcbsp1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_mcbsp1_slaves),
+	.opt_clks	= mcbsp1_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(mcbsp1_opt_clks),
 };
 
 /* mcbsp2 */
-static struct omap_hwmod omap44xx_mcbsp2_hwmod;
 static struct omap_hwmod_irq_info omap44xx_mcbsp2_irqs[] = {
-	{ .irq = 22 + OMAP44XX_IRQ_GIC_START },
+	{ .name = "common", .irq = 22 + OMAP44XX_IRQ_GIC_START },
 	{ .irq = -1 }
 };
 
@@ -3027,48 +1957,9 @@ static struct omap_hwmod_dma_info omap44xx_mcbsp2_sdma_reqs[] = {
 	{ .dma_req = -1 }
 };
 
-static struct omap_hwmod_addr_space omap44xx_mcbsp2_addrs[] = {
-	{
-		.name		= "mpu",
-		.pa_start	= 0x40124000,
-		.pa_end		= 0x401240ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_abe -> mcbsp2 */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp2 = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_mcbsp2_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.addr		= omap44xx_mcbsp2_addrs,
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_addr_space omap44xx_mcbsp2_dma_addrs[] = {
-	{
-		.name		= "dma",
-		.pa_start	= 0x49024000,
-		.pa_end		= 0x490240ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_abe -> mcbsp2 (dma) */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp2_dma = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_mcbsp2_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.addr		= omap44xx_mcbsp2_dma_addrs,
-	.user		= OCP_USER_SDMA,
-};
-
-/* mcbsp2 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_mcbsp2_slaves[] = {
-	&omap44xx_l4_abe__mcbsp2,
-	&omap44xx_l4_abe__mcbsp2_dma,
+static struct omap_hwmod_opt_clk mcbsp2_opt_clks[] = {
+	{ .role = "pad_fck", .clk = "pad_clks_ck" },
+	{ .role = "prcm_clk", .clk = "mcbsp2_sync_mux_ck" },
 };
 
 static struct omap_hwmod omap44xx_mcbsp2_hwmod = {
@@ -3085,14 +1976,13 @@ static struct omap_hwmod omap44xx_mcbsp2_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.slaves		= omap44xx_mcbsp2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_mcbsp2_slaves),
+	.opt_clks	= mcbsp2_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(mcbsp2_opt_clks),
 };
 
 /* mcbsp3 */
-static struct omap_hwmod omap44xx_mcbsp3_hwmod;
 static struct omap_hwmod_irq_info omap44xx_mcbsp3_irqs[] = {
-	{ .irq = 23 + OMAP44XX_IRQ_GIC_START },
+	{ .name = "common", .irq = 23 + OMAP44XX_IRQ_GIC_START },
 	{ .irq = -1 }
 };
 
@@ -3102,48 +1992,9 @@ static struct omap_hwmod_dma_info omap44xx_mcbsp3_sdma_reqs[] = {
 	{ .dma_req = -1 }
 };
 
-static struct omap_hwmod_addr_space omap44xx_mcbsp3_addrs[] = {
-	{
-		.name		= "mpu",
-		.pa_start	= 0x40126000,
-		.pa_end		= 0x401260ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_abe -> mcbsp3 */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp3 = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_mcbsp3_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.addr		= omap44xx_mcbsp3_addrs,
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_addr_space omap44xx_mcbsp3_dma_addrs[] = {
-	{
-		.name		= "dma",
-		.pa_start	= 0x49026000,
-		.pa_end		= 0x490260ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_abe -> mcbsp3 (dma) */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp3_dma = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_mcbsp3_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.addr		= omap44xx_mcbsp3_dma_addrs,
-	.user		= OCP_USER_SDMA,
-};
-
-/* mcbsp3 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_mcbsp3_slaves[] = {
-	&omap44xx_l4_abe__mcbsp3,
-	&omap44xx_l4_abe__mcbsp3_dma,
+static struct omap_hwmod_opt_clk mcbsp3_opt_clks[] = {
+	{ .role = "pad_fck", .clk = "pad_clks_ck" },
+	{ .role = "prcm_clk", .clk = "mcbsp3_sync_mux_ck" },
 };
 
 static struct omap_hwmod omap44xx_mcbsp3_hwmod = {
@@ -3160,14 +2011,13 @@ static struct omap_hwmod omap44xx_mcbsp3_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.slaves		= omap44xx_mcbsp3_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_mcbsp3_slaves),
+	.opt_clks	= mcbsp3_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(mcbsp3_opt_clks),
 };
 
 /* mcbsp4 */
-static struct omap_hwmod omap44xx_mcbsp4_hwmod;
 static struct omap_hwmod_irq_info omap44xx_mcbsp4_irqs[] = {
-	{ .irq = 16 + OMAP44XX_IRQ_GIC_START },
+	{ .name = "common", .irq = 16 + OMAP44XX_IRQ_GIC_START },
 	{ .irq = -1 }
 };
 
@@ -3177,27 +2027,9 @@ static struct omap_hwmod_dma_info omap44xx_mcbsp4_sdma_reqs[] = {
 	{ .dma_req = -1 }
 };
 
-static struct omap_hwmod_addr_space omap44xx_mcbsp4_addrs[] = {
-	{
-		.pa_start	= 0x48096000,
-		.pa_end		= 0x480960ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> mcbsp4 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__mcbsp4 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_mcbsp4_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_mcbsp4_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mcbsp4 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_mcbsp4_slaves[] = {
-	&omap44xx_l4_per__mcbsp4,
+static struct omap_hwmod_opt_clk mcbsp4_opt_clks[] = {
+	{ .role = "pad_fck", .clk = "pad_clks_ck" },
+	{ .role = "prcm_clk", .clk = "mcbsp4_sync_mux_ck" },
 };
 
 static struct omap_hwmod omap44xx_mcbsp4_hwmod = {
@@ -3214,8 +2046,8 @@ static struct omap_hwmod omap44xx_mcbsp4_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.slaves		= omap44xx_mcbsp4_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_mcbsp4_slaves),
+	.opt_clks	= mcbsp4_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(mcbsp4_opt_clks),
 };
 
 /*
@@ -3240,7 +2072,6 @@ static struct omap_hwmod_class omap44xx_mcpdm_hwmod_class = {
 };
 
 /* mcpdm */
-static struct omap_hwmod omap44xx_mcpdm_hwmod;
 static struct omap_hwmod_irq_info omap44xx_mcpdm_irqs[] = {
 	{ .irq = 112 + OMAP44XX_IRQ_GIC_START },
 	{ .irq = -1 }
@@ -3252,48 +2083,6 @@ static struct omap_hwmod_dma_info omap44xx_mcpdm_sdma_reqs[] = {
 	{ .dma_req = -1 }
 };
 
-static struct omap_hwmod_addr_space omap44xx_mcpdm_addrs[] = {
-	{
-		.pa_start	= 0x40132000,
-		.pa_end		= 0x4013207f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_abe -> mcpdm */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcpdm = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_mcpdm_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.addr		= omap44xx_mcpdm_addrs,
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_addr_space omap44xx_mcpdm_dma_addrs[] = {
-	{
-		.pa_start	= 0x49032000,
-		.pa_end		= 0x4903207f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_abe -> mcpdm (dma) */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcpdm_dma = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_mcpdm_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.addr		= omap44xx_mcpdm_dma_addrs,
-	.user		= OCP_USER_SDMA,
-};
-
-/* mcpdm slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_mcpdm_slaves[] = {
-	&omap44xx_l4_abe__mcpdm,
-	&omap44xx_l4_abe__mcpdm_dma,
-};
-
 static struct omap_hwmod omap44xx_mcpdm_hwmod = {
 	.name		= "mcpdm",
 	.class		= &omap44xx_mcpdm_hwmod_class,
@@ -3308,8 +2097,6 @@ static struct omap_hwmod omap44xx_mcpdm_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.slaves		= omap44xx_mcpdm_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_mcpdm_slaves),
 };
 
 /*
@@ -3335,7 +2122,6 @@ static struct omap_hwmod_class omap44xx_mcspi_hwmod_class = {
 };
 
 /* mcspi1 */
-static struct omap_hwmod omap44xx_mcspi1_hwmod;
 static struct omap_hwmod_irq_info omap44xx_mcspi1_irqs[] = {
 	{ .irq = 65 + OMAP44XX_IRQ_GIC_START },
 	{ .irq = -1 }
@@ -3353,29 +2139,6 @@ static struct omap_hwmod_dma_info omap44xx_mcspi1_sdma_reqs[] = {
 	{ .dma_req = -1 }
 };
 
-static struct omap_hwmod_addr_space omap44xx_mcspi1_addrs[] = {
-	{
-		.pa_start	= 0x48098000,
-		.pa_end		= 0x480981ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> mcspi1 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__mcspi1 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_mcspi1_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_mcspi1_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mcspi1 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_mcspi1_slaves[] = {
-	&omap44xx_l4_per__mcspi1,
-};
-
 /* mcspi1 dev_attr */
 static struct omap2_mcspi_dev_attr mcspi1_dev_attr = {
 	.num_chipselect	= 4,
@@ -3396,12 +2159,9 @@ static struct omap_hwmod omap44xx_mcspi1_hwmod = {
 		},
 	},
 	.dev_attr	= &mcspi1_dev_attr,
-	.slaves		= omap44xx_mcspi1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_mcspi1_slaves),
 };
 
 /* mcspi2 */
-static struct omap_hwmod omap44xx_mcspi2_hwmod;
 static struct omap_hwmod_irq_info omap44xx_mcspi2_irqs[] = {
 	{ .irq = 66 + OMAP44XX_IRQ_GIC_START },
 	{ .irq = -1 }
@@ -3415,29 +2175,6 @@ static struct omap_hwmod_dma_info omap44xx_mcspi2_sdma_reqs[] = {
 	{ .dma_req = -1 }
 };
 
-static struct omap_hwmod_addr_space omap44xx_mcspi2_addrs[] = {
-	{
-		.pa_start	= 0x4809a000,
-		.pa_end		= 0x4809a1ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> mcspi2 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__mcspi2 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_mcspi2_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_mcspi2_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mcspi2 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_mcspi2_slaves[] = {
-	&omap44xx_l4_per__mcspi2,
-};
-
 /* mcspi2 dev_attr */
 static struct omap2_mcspi_dev_attr mcspi2_dev_attr = {
 	.num_chipselect	= 2,
@@ -3458,12 +2195,9 @@ static struct omap_hwmod omap44xx_mcspi2_hwmod = {
 		},
 	},
 	.dev_attr	= &mcspi2_dev_attr,
-	.slaves		= omap44xx_mcspi2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_mcspi2_slaves),
 };
 
 /* mcspi3 */
-static struct omap_hwmod omap44xx_mcspi3_hwmod;
 static struct omap_hwmod_irq_info omap44xx_mcspi3_irqs[] = {
 	{ .irq = 91 + OMAP44XX_IRQ_GIC_START },
 	{ .irq = -1 }
@@ -3477,29 +2211,6 @@ static struct omap_hwmod_dma_info omap44xx_mcspi3_sdma_reqs[] = {
 	{ .dma_req = -1 }
 };
 
-static struct omap_hwmod_addr_space omap44xx_mcspi3_addrs[] = {
-	{
-		.pa_start	= 0x480b8000,
-		.pa_end		= 0x480b81ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> mcspi3 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__mcspi3 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_mcspi3_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_mcspi3_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mcspi3 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_mcspi3_slaves[] = {
-	&omap44xx_l4_per__mcspi3,
-};
-
 /* mcspi3 dev_attr */
 static struct omap2_mcspi_dev_attr mcspi3_dev_attr = {
 	.num_chipselect	= 2,
@@ -3520,12 +2231,9 @@ static struct omap_hwmod omap44xx_mcspi3_hwmod = {
 		},
 	},
 	.dev_attr	= &mcspi3_dev_attr,
-	.slaves		= omap44xx_mcspi3_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_mcspi3_slaves),
 };
 
 /* mcspi4 */
-static struct omap_hwmod omap44xx_mcspi4_hwmod;
 static struct omap_hwmod_irq_info omap44xx_mcspi4_irqs[] = {
 	{ .irq = 48 + OMAP44XX_IRQ_GIC_START },
 	{ .irq = -1 }
@@ -3537,29 +2245,6 @@ static struct omap_hwmod_dma_info omap44xx_mcspi4_sdma_reqs[] = {
 	{ .dma_req = -1 }
 };
 
-static struct omap_hwmod_addr_space omap44xx_mcspi4_addrs[] = {
-	{
-		.pa_start	= 0x480ba000,
-		.pa_end		= 0x480ba1ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> mcspi4 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__mcspi4 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_mcspi4_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_mcspi4_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mcspi4 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_mcspi4_slaves[] = {
-	&omap44xx_l4_per__mcspi4,
-};
-
 /* mcspi4 dev_attr */
 static struct omap2_mcspi_dev_attr mcspi4_dev_attr = {
 	.num_chipselect	= 1,
@@ -3580,8 +2265,6 @@ static struct omap_hwmod omap44xx_mcspi4_hwmod = {
 		},
 	},
 	.dev_attr	= &mcspi4_dev_attr,
-	.slaves		= omap44xx_mcspi4_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_mcspi4_slaves),
 };
 
 /*
@@ -3618,34 +2301,6 @@ static struct omap_hwmod_dma_info omap44xx_mmc1_sdma_reqs[] = {
 	{ .dma_req = -1 }
 };
 
-/* mmc1 master ports */
-static struct omap_hwmod_ocp_if *omap44xx_mmc1_masters[] = {
-	&omap44xx_mmc1__l3_main_1,
-};
-
-static struct omap_hwmod_addr_space omap44xx_mmc1_addrs[] = {
-	{
-		.pa_start	= 0x4809c000,
-		.pa_end		= 0x4809c3ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> mmc1 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__mmc1 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_mmc1_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_mmc1_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mmc1 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_mmc1_slaves[] = {
-	&omap44xx_l4_per__mmc1,
-};
-
 /* mmc1 dev_attr */
 static struct omap_mmc_dev_attr mmc1_dev_attr = {
 	.flags	= OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
@@ -3666,10 +2321,6 @@ static struct omap_hwmod omap44xx_mmc1_hwmod = {
 		},
 	},
 	.dev_attr	= &mmc1_dev_attr,
-	.slaves		= omap44xx_mmc1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_mmc1_slaves),
-	.masters	= omap44xx_mmc1_masters,
-	.masters_cnt	= ARRAY_SIZE(omap44xx_mmc1_masters),
 };
 
 /* mmc2 */
@@ -3684,34 +2335,6 @@ static struct omap_hwmod_dma_info omap44xx_mmc2_sdma_reqs[] = {
 	{ .dma_req = -1 }
 };
 
-/* mmc2 master ports */
-static struct omap_hwmod_ocp_if *omap44xx_mmc2_masters[] = {
-	&omap44xx_mmc2__l3_main_1,
-};
-
-static struct omap_hwmod_addr_space omap44xx_mmc2_addrs[] = {
-	{
-		.pa_start	= 0x480b4000,
-		.pa_end		= 0x480b43ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> mmc2 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__mmc2 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_mmc2_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_mmc2_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mmc2 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_mmc2_slaves[] = {
-	&omap44xx_l4_per__mmc2,
-};
-
 static struct omap_hwmod omap44xx_mmc2_hwmod = {
 	.name		= "mmc2",
 	.class		= &omap44xx_mmc_hwmod_class,
@@ -3726,14 +2349,9 @@ static struct omap_hwmod omap44xx_mmc2_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.slaves		= omap44xx_mmc2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_mmc2_slaves),
-	.masters	= omap44xx_mmc2_masters,
-	.masters_cnt	= ARRAY_SIZE(omap44xx_mmc2_masters),
 };
 
 /* mmc3 */
-static struct omap_hwmod omap44xx_mmc3_hwmod;
 static struct omap_hwmod_irq_info omap44xx_mmc3_irqs[] = {
 	{ .irq = 94 + OMAP44XX_IRQ_GIC_START },
 	{ .irq = -1 }
@@ -3745,29 +2363,6 @@ static struct omap_hwmod_dma_info omap44xx_mmc3_sdma_reqs[] = {
 	{ .dma_req = -1 }
 };
 
-static struct omap_hwmod_addr_space omap44xx_mmc3_addrs[] = {
-	{
-		.pa_start	= 0x480ad000,
-		.pa_end		= 0x480ad3ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> mmc3 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__mmc3 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_mmc3_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_mmc3_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mmc3 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_mmc3_slaves[] = {
-	&omap44xx_l4_per__mmc3,
-};
-
 static struct omap_hwmod omap44xx_mmc3_hwmod = {
 	.name		= "mmc3",
 	.class		= &omap44xx_mmc_hwmod_class,
@@ -3782,12 +2377,9 @@ static struct omap_hwmod omap44xx_mmc3_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.slaves		= omap44xx_mmc3_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_mmc3_slaves),
 };
 
 /* mmc4 */
-static struct omap_hwmod omap44xx_mmc4_hwmod;
 static struct omap_hwmod_irq_info omap44xx_mmc4_irqs[] = {
 	{ .irq = 96 + OMAP44XX_IRQ_GIC_START },
 	{ .irq = -1 }
@@ -3799,35 +2391,11 @@ static struct omap_hwmod_dma_info omap44xx_mmc4_sdma_reqs[] = {
 	{ .dma_req = -1 }
 };
 
-static struct omap_hwmod_addr_space omap44xx_mmc4_addrs[] = {
-	{
-		.pa_start	= 0x480d1000,
-		.pa_end		= 0x480d13ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> mmc4 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__mmc4 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_mmc4_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_mmc4_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mmc4 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_mmc4_slaves[] = {
-	&omap44xx_l4_per__mmc4,
-};
-
 static struct omap_hwmod omap44xx_mmc4_hwmod = {
 	.name		= "mmc4",
 	.class		= &omap44xx_mmc_hwmod_class,
 	.clkdm_name	= "l4_per_clkdm",
 	.mpu_irqs	= omap44xx_mmc4_irqs,
-
 	.sdma_reqs	= omap44xx_mmc4_sdma_reqs,
 	.main_clk	= "mmc4_fck",
 	.prcm = {
@@ -3837,12 +2405,9 @@ static struct omap_hwmod omap44xx_mmc4_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.slaves		= omap44xx_mmc4_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_mmc4_slaves),
 };
 
 /* mmc5 */
-static struct omap_hwmod omap44xx_mmc5_hwmod;
 static struct omap_hwmod_irq_info omap44xx_mmc5_irqs[] = {
 	{ .irq = 59 + OMAP44XX_IRQ_GIC_START },
 	{ .irq = -1 }
@@ -3854,29 +2419,6 @@ static struct omap_hwmod_dma_info omap44xx_mmc5_sdma_reqs[] = {
 	{ .dma_req = -1 }
 };
 
-static struct omap_hwmod_addr_space omap44xx_mmc5_addrs[] = {
-	{
-		.pa_start	= 0x480d5000,
-		.pa_end		= 0x480d53ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> mmc5 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__mmc5 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_mmc5_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_mmc5_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mmc5 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_mmc5_slaves[] = {
-	&omap44xx_l4_per__mmc5,
-};
-
 static struct omap_hwmod omap44xx_mmc5_hwmod = {
 	.name		= "mmc5",
 	.class		= &omap44xx_mmc_hwmod_class,
@@ -3891,8 +2433,6 @@ static struct omap_hwmod omap44xx_mmc5_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.slaves		= omap44xx_mmc5_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_mmc5_slaves),
 };
 
 /*
@@ -3912,13 +2452,6 @@ static struct omap_hwmod_irq_info omap44xx_mpu_irqs[] = {
 	{ .irq = -1 }
 };
 
-/* mpu master ports */
-static struct omap_hwmod_ocp_if *omap44xx_mpu_masters[] = {
-	&omap44xx_mpu__l3_main_1,
-	&omap44xx_mpu__l4_abe,
-	&omap44xx_mpu__dmm,
-};
-
 static struct omap_hwmod omap44xx_mpu_hwmod = {
 	.name		= "mpu",
 	.class		= &omap44xx_mpu_hwmod_class,
@@ -3932,8 +2465,252 @@ static struct omap_hwmod omap44xx_mpu_hwmod = {
 			.context_offs = OMAP4_RM_MPU_MPU_CONTEXT_OFFSET,
 		},
 	},
-	.masters	= omap44xx_mpu_masters,
-	.masters_cnt	= ARRAY_SIZE(omap44xx_mpu_masters),
+};
+
+/*
+ * 'ocmc_ram' class
+ * top-level core on-chip ram
+ */
+
+static struct omap_hwmod_class omap44xx_ocmc_ram_hwmod_class = {
+	.name	= "ocmc_ram",
+};
+
+/* ocmc_ram */
+static struct omap_hwmod omap44xx_ocmc_ram_hwmod = {
+	.name		= "ocmc_ram",
+	.class		= &omap44xx_ocmc_ram_hwmod_class,
+	.clkdm_name	= "l3_2_clkdm",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = OMAP4_CM_L3_2_OCMC_RAM_CLKCTRL_OFFSET,
+			.context_offs = OMAP4_RM_L3_2_OCMC_RAM_CONTEXT_OFFSET,
+		},
+	},
+};
+
+/*
+ * 'ocp2scp' class
+ * bridge to transform ocp interface protocol to scp (serial control port)
+ * protocol
+ */
+
+static struct omap_hwmod_class omap44xx_ocp2scp_hwmod_class = {
+	.name	= "ocp2scp",
+};
+
+/* ocp2scp_usb_phy */
+static struct omap_hwmod_opt_clk ocp2scp_usb_phy_opt_clks[] = {
+	{ .role = "phy_48m", .clk = "ocp2scp_usb_phy_phy_48m" },
+};
+
+static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = {
+	.name		= "ocp2scp_usb_phy",
+	.class		= &omap44xx_ocp2scp_hwmod_class,
+	.clkdm_name	= "l3_init_clkdm",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = OMAP4_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL_OFFSET,
+			.context_offs = OMAP4_RM_L3INIT_USBPHYOCP2SCP_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
+	.opt_clks	= ocp2scp_usb_phy_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(ocp2scp_usb_phy_opt_clks),
+};
+
+/*
+ * 'prcm' class
+ * power and reset manager (part of the prcm infrastructure) + clock manager 2
+ * + clock manager 1 (in always on power domain) + local prm in mpu
+ */
+
+static struct omap_hwmod_class omap44xx_prcm_hwmod_class = {
+	.name	= "prcm",
+};
+
+/* prcm_mpu */
+static struct omap_hwmod omap44xx_prcm_mpu_hwmod = {
+	.name		= "prcm_mpu",
+	.class		= &omap44xx_prcm_hwmod_class,
+	.clkdm_name	= "l4_wkup_clkdm",
+};
+
+/* cm_core_aon */
+static struct omap_hwmod omap44xx_cm_core_aon_hwmod = {
+	.name		= "cm_core_aon",
+	.class		= &omap44xx_prcm_hwmod_class,
+	.clkdm_name	= "cm_clkdm",
+};
+
+/* cm_core */
+static struct omap_hwmod omap44xx_cm_core_hwmod = {
+	.name		= "cm_core",
+	.class		= &omap44xx_prcm_hwmod_class,
+	.clkdm_name	= "cm_clkdm",
+};
+
+/* prm */
+static struct omap_hwmod_irq_info omap44xx_prm_irqs[] = {
+	{ .irq = 11 + OMAP44XX_IRQ_GIC_START },
+	{ .irq = -1 }
+};
+
+static struct omap_hwmod_rst_info omap44xx_prm_resets[] = {
+	{ .name = "rst_global_warm_sw", .rst_shift = 0 },
+	{ .name = "rst_global_cold_sw", .rst_shift = 1 },
+};
+
+static struct omap_hwmod omap44xx_prm_hwmod = {
+	.name		= "prm",
+	.class		= &omap44xx_prcm_hwmod_class,
+	.clkdm_name	= "prm_clkdm",
+	.mpu_irqs	= omap44xx_prm_irqs,
+	.rst_lines	= omap44xx_prm_resets,
+	.rst_lines_cnt	= ARRAY_SIZE(omap44xx_prm_resets),
+};
+
+/*
+ * 'scrm' class
+ * system clock and reset manager
+ */
+
+static struct omap_hwmod_class omap44xx_scrm_hwmod_class = {
+	.name	= "scrm",
+};
+
+/* scrm */
+static struct omap_hwmod omap44xx_scrm_hwmod = {
+	.name		= "scrm",
+	.class		= &omap44xx_scrm_hwmod_class,
+	.clkdm_name	= "l4_wkup_clkdm",
+};
+
+/*
+ * 'sl2if' class
+ * shared level 2 memory interface
+ */
+
+static struct omap_hwmod_class omap44xx_sl2if_hwmod_class = {
+	.name	= "sl2if",
+};
+
+/* sl2if */
+static struct omap_hwmod omap44xx_sl2if_hwmod = {
+	.name		= "sl2if",
+	.class		= &omap44xx_sl2if_hwmod_class,
+	.clkdm_name	= "ivahd_clkdm",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = OMAP4_CM_IVAHD_SL2_CLKCTRL_OFFSET,
+			.context_offs = OMAP4_RM_IVAHD_SL2_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
+};
+
+/*
+ * 'slimbus' class
+ * bidirectional, multi-drop, multi-channel two-line serial interface between
+ * the device and external components
+ */
+
+static struct omap_hwmod_class_sysconfig omap44xx_slimbus_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.sysc_flags	= (SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class omap44xx_slimbus_hwmod_class = {
+	.name	= "slimbus",
+	.sysc	= &omap44xx_slimbus_sysc,
+};
+
+/* slimbus1 */
+static struct omap_hwmod_irq_info omap44xx_slimbus1_irqs[] = {
+	{ .irq = 97 + OMAP44XX_IRQ_GIC_START },
+	{ .irq = -1 }
+};
+
+static struct omap_hwmod_dma_info omap44xx_slimbus1_sdma_reqs[] = {
+	{ .name = "tx0", .dma_req = 84 + OMAP44XX_DMA_REQ_START },
+	{ .name = "tx1", .dma_req = 85 + OMAP44XX_DMA_REQ_START },
+	{ .name = "tx2", .dma_req = 86 + OMAP44XX_DMA_REQ_START },
+	{ .name = "tx3", .dma_req = 87 + OMAP44XX_DMA_REQ_START },
+	{ .name = "rx0", .dma_req = 88 + OMAP44XX_DMA_REQ_START },
+	{ .name = "rx1", .dma_req = 89 + OMAP44XX_DMA_REQ_START },
+	{ .name = "rx2", .dma_req = 90 + OMAP44XX_DMA_REQ_START },
+	{ .name = "rx3", .dma_req = 91 + OMAP44XX_DMA_REQ_START },
+	{ .dma_req = -1 }
+};
+
+static struct omap_hwmod_opt_clk slimbus1_opt_clks[] = {
+	{ .role = "fclk_1", .clk = "slimbus1_fclk_1" },
+	{ .role = "fclk_0", .clk = "slimbus1_fclk_0" },
+	{ .role = "fclk_2", .clk = "slimbus1_fclk_2" },
+	{ .role = "slimbus_clk", .clk = "slimbus1_slimbus_clk" },
+};
+
+static struct omap_hwmod omap44xx_slimbus1_hwmod = {
+	.name		= "slimbus1",
+	.class		= &omap44xx_slimbus_hwmod_class,
+	.clkdm_name	= "abe_clkdm",
+	.mpu_irqs	= omap44xx_slimbus1_irqs,
+	.sdma_reqs	= omap44xx_slimbus1_sdma_reqs,
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = OMAP4_CM1_ABE_SLIMBUS_CLKCTRL_OFFSET,
+			.context_offs = OMAP4_RM_ABE_SLIMBUS_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.opt_clks	= slimbus1_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(slimbus1_opt_clks),
+};
+
+/* slimbus2 */
+static struct omap_hwmod_irq_info omap44xx_slimbus2_irqs[] = {
+	{ .irq = 98 + OMAP44XX_IRQ_GIC_START },
+	{ .irq = -1 }
+};
+
+static struct omap_hwmod_dma_info omap44xx_slimbus2_sdma_reqs[] = {
+	{ .name = "tx0", .dma_req = 92 + OMAP44XX_DMA_REQ_START },
+	{ .name = "tx1", .dma_req = 93 + OMAP44XX_DMA_REQ_START },
+	{ .name = "tx2", .dma_req = 94 + OMAP44XX_DMA_REQ_START },
+	{ .name = "tx3", .dma_req = 95 + OMAP44XX_DMA_REQ_START },
+	{ .name = "rx0", .dma_req = 96 + OMAP44XX_DMA_REQ_START },
+	{ .name = "rx1", .dma_req = 97 + OMAP44XX_DMA_REQ_START },
+	{ .name = "rx2", .dma_req = 98 + OMAP44XX_DMA_REQ_START },
+	{ .name = "rx3", .dma_req = 99 + OMAP44XX_DMA_REQ_START },
+	{ .dma_req = -1 }
+};
+
+static struct omap_hwmod_opt_clk slimbus2_opt_clks[] = {
+	{ .role = "fclk_1", .clk = "slimbus2_fclk_1" },
+	{ .role = "fclk_0", .clk = "slimbus2_fclk_0" },
+	{ .role = "slimbus_clk", .clk = "slimbus2_slimbus_clk" },
+};
+
+static struct omap_hwmod omap44xx_slimbus2_hwmod = {
+	.name		= "slimbus2",
+	.class		= &omap44xx_slimbus_hwmod_class,
+	.clkdm_name	= "l4_per_clkdm",
+	.mpu_irqs	= omap44xx_slimbus2_irqs,
+	.sdma_reqs	= omap44xx_slimbus2_sdma_reqs,
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = OMAP4_CM_L4PER_SLIMBUS2_CLKCTRL_OFFSET,
+			.context_offs = OMAP4_RM_L4PER_SLIMBUS2_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.opt_clks	= slimbus2_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(slimbus2_opt_clks),
 };
 
 /*
@@ -3967,35 +2744,11 @@ static struct omap_smartreflex_dev_attr smartreflex_core_dev_attr = {
 	.sensor_voltdm_name   = "core",
 };
 
-static struct omap_hwmod omap44xx_smartreflex_core_hwmod;
 static struct omap_hwmod_irq_info omap44xx_smartreflex_core_irqs[] = {
 	{ .irq = 19 + OMAP44XX_IRQ_GIC_START },
 	{ .irq = -1 }
 };
 
-static struct omap_hwmod_addr_space omap44xx_smartreflex_core_addrs[] = {
-	{
-		.pa_start	= 0x4a0dd000,
-		.pa_end		= 0x4a0dd03f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_cfg -> smartreflex_core */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__smartreflex_core = {
-	.master		= &omap44xx_l4_cfg_hwmod,
-	.slave		= &omap44xx_smartreflex_core_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_smartreflex_core_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* smartreflex_core slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_smartreflex_core_slaves[] = {
-	&omap44xx_l4_cfg__smartreflex_core,
-};
-
 static struct omap_hwmod omap44xx_smartreflex_core_hwmod = {
 	.name		= "smartreflex_core",
 	.class		= &omap44xx_smartreflex_hwmod_class,
@@ -4010,8 +2763,6 @@ static struct omap_hwmod omap44xx_smartreflex_core_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.slaves		= omap44xx_smartreflex_core_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_smartreflex_core_slaves),
 	.dev_attr	= &smartreflex_core_dev_attr,
 };
 
@@ -4020,35 +2771,11 @@ static struct omap_smartreflex_dev_attr smartreflex_iva_dev_attr = {
 	.sensor_voltdm_name	= "iva",
 };
 
-static struct omap_hwmod omap44xx_smartreflex_iva_hwmod;
 static struct omap_hwmod_irq_info omap44xx_smartreflex_iva_irqs[] = {
 	{ .irq = 102 + OMAP44XX_IRQ_GIC_START },
 	{ .irq = -1 }
 };
 
-static struct omap_hwmod_addr_space omap44xx_smartreflex_iva_addrs[] = {
-	{
-		.pa_start	= 0x4a0db000,
-		.pa_end		= 0x4a0db03f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_cfg -> smartreflex_iva */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__smartreflex_iva = {
-	.master		= &omap44xx_l4_cfg_hwmod,
-	.slave		= &omap44xx_smartreflex_iva_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_smartreflex_iva_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* smartreflex_iva slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_smartreflex_iva_slaves[] = {
-	&omap44xx_l4_cfg__smartreflex_iva,
-};
-
 static struct omap_hwmod omap44xx_smartreflex_iva_hwmod = {
 	.name		= "smartreflex_iva",
 	.class		= &omap44xx_smartreflex_hwmod_class,
@@ -4062,8 +2789,6 @@ static struct omap_hwmod omap44xx_smartreflex_iva_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.slaves		= omap44xx_smartreflex_iva_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_smartreflex_iva_slaves),
 	.dev_attr	= &smartreflex_iva_dev_attr,
 };
 
@@ -4072,35 +2797,11 @@ static struct omap_smartreflex_dev_attr smartreflex_mpu_dev_attr = {
 	.sensor_voltdm_name	= "mpu",
 };
 
-static struct omap_hwmod omap44xx_smartreflex_mpu_hwmod;
 static struct omap_hwmod_irq_info omap44xx_smartreflex_mpu_irqs[] = {
 	{ .irq = 18 + OMAP44XX_IRQ_GIC_START },
 	{ .irq = -1 }
 };
 
-static struct omap_hwmod_addr_space omap44xx_smartreflex_mpu_addrs[] = {
-	{
-		.pa_start	= 0x4a0d9000,
-		.pa_end		= 0x4a0d903f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_cfg -> smartreflex_mpu */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__smartreflex_mpu = {
-	.master		= &omap44xx_l4_cfg_hwmod,
-	.slave		= &omap44xx_smartreflex_mpu_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_smartreflex_mpu_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* smartreflex_mpu slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_smartreflex_mpu_slaves[] = {
-	&omap44xx_l4_cfg__smartreflex_mpu,
-};
-
 static struct omap_hwmod omap44xx_smartreflex_mpu_hwmod = {
 	.name		= "smartreflex_mpu",
 	.class		= &omap44xx_smartreflex_hwmod_class,
@@ -4114,8 +2815,6 @@ static struct omap_hwmod omap44xx_smartreflex_mpu_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.slaves		= omap44xx_smartreflex_mpu_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_smartreflex_mpu_slaves),
 	.dev_attr	= &smartreflex_mpu_dev_attr,
 };
 
@@ -4143,30 +2842,6 @@ static struct omap_hwmod_class omap44xx_spinlock_hwmod_class = {
 };
 
 /* spinlock */
-static struct omap_hwmod omap44xx_spinlock_hwmod;
-static struct omap_hwmod_addr_space omap44xx_spinlock_addrs[] = {
-	{
-		.pa_start	= 0x4a0f6000,
-		.pa_end		= 0x4a0f6fff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_cfg -> spinlock */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__spinlock = {
-	.master		= &omap44xx_l4_cfg_hwmod,
-	.slave		= &omap44xx_spinlock_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_spinlock_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* spinlock slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_spinlock_slaves[] = {
-	&omap44xx_l4_cfg__spinlock,
-};
-
 static struct omap_hwmod omap44xx_spinlock_hwmod = {
 	.name		= "spinlock",
 	.class		= &omap44xx_spinlock_hwmod_class,
@@ -4177,8 +2852,6 @@ static struct omap_hwmod omap44xx_spinlock_hwmod = {
 			.context_offs = OMAP4_RM_L4CFG_HW_SEM_CONTEXT_OFFSET,
 		},
 	},
-	.slaves		= omap44xx_spinlock_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_spinlock_slaves),
 };
 
 /*
@@ -4230,35 +2903,11 @@ static struct omap_timer_capability_dev_attr capability_pwm_dev_attr = {
 };
 
 /* timer1 */
-static struct omap_hwmod omap44xx_timer1_hwmod;
 static struct omap_hwmod_irq_info omap44xx_timer1_irqs[] = {
 	{ .irq = 37 + OMAP44XX_IRQ_GIC_START },
 	{ .irq = -1 }
 };
 
-static struct omap_hwmod_addr_space omap44xx_timer1_addrs[] = {
-	{
-		.pa_start	= 0x4a318000,
-		.pa_end		= 0x4a31807f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_wkup -> timer1 */
-static struct omap_hwmod_ocp_if omap44xx_l4_wkup__timer1 = {
-	.master		= &omap44xx_l4_wkup_hwmod,
-	.slave		= &omap44xx_timer1_hwmod,
-	.clk		= "l4_wkup_clk_mux_ck",
-	.addr		= omap44xx_timer1_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer1 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_timer1_slaves[] = {
-	&omap44xx_l4_wkup__timer1,
-};
-
 static struct omap_hwmod omap44xx_timer1_hwmod = {
 	.name		= "timer1",
 	.class		= &omap44xx_timer_1ms_hwmod_class,
@@ -4273,40 +2922,14 @@ static struct omap_hwmod omap44xx_timer1_hwmod = {
 		},
 	},
 	.dev_attr	= &capability_alwon_dev_attr,
-	.slaves		= omap44xx_timer1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_timer1_slaves),
 };
 
 /* timer2 */
-static struct omap_hwmod omap44xx_timer2_hwmod;
 static struct omap_hwmod_irq_info omap44xx_timer2_irqs[] = {
 	{ .irq = 38 + OMAP44XX_IRQ_GIC_START },
 	{ .irq = -1 }
 };
 
-static struct omap_hwmod_addr_space omap44xx_timer2_addrs[] = {
-	{
-		.pa_start	= 0x48032000,
-		.pa_end		= 0x4803207f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> timer2 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__timer2 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_timer2_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_timer2_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer2 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_timer2_slaves[] = {
-	&omap44xx_l4_per__timer2,
-};
-
 static struct omap_hwmod omap44xx_timer2_hwmod = {
 	.name		= "timer2",
 	.class		= &omap44xx_timer_1ms_hwmod_class,
@@ -4321,40 +2944,14 @@ static struct omap_hwmod omap44xx_timer2_hwmod = {
 		},
 	},
 	.dev_attr	= &capability_alwon_dev_attr,
-	.slaves		= omap44xx_timer2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_timer2_slaves),
 };
 
 /* timer3 */
-static struct omap_hwmod omap44xx_timer3_hwmod;
 static struct omap_hwmod_irq_info omap44xx_timer3_irqs[] = {
 	{ .irq = 39 + OMAP44XX_IRQ_GIC_START },
 	{ .irq = -1 }
 };
 
-static struct omap_hwmod_addr_space omap44xx_timer3_addrs[] = {
-	{
-		.pa_start	= 0x48034000,
-		.pa_end		= 0x4803407f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> timer3 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__timer3 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_timer3_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_timer3_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer3 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_timer3_slaves[] = {
-	&omap44xx_l4_per__timer3,
-};
-
 static struct omap_hwmod omap44xx_timer3_hwmod = {
 	.name		= "timer3",
 	.class		= &omap44xx_timer_hwmod_class,
@@ -4369,40 +2966,14 @@ static struct omap_hwmod omap44xx_timer3_hwmod = {
 		},
 	},
 	.dev_attr	= &capability_alwon_dev_attr,
-	.slaves		= omap44xx_timer3_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_timer3_slaves),
 };
 
 /* timer4 */
-static struct omap_hwmod omap44xx_timer4_hwmod;
 static struct omap_hwmod_irq_info omap44xx_timer4_irqs[] = {
 	{ .irq = 40 + OMAP44XX_IRQ_GIC_START },
 	{ .irq = -1 }
 };
 
-static struct omap_hwmod_addr_space omap44xx_timer4_addrs[] = {
-	{
-		.pa_start	= 0x48036000,
-		.pa_end		= 0x4803607f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> timer4 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__timer4 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_timer4_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_timer4_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer4 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_timer4_slaves[] = {
-	&omap44xx_l4_per__timer4,
-};
-
 static struct omap_hwmod omap44xx_timer4_hwmod = {
 	.name		= "timer4",
 	.class		= &omap44xx_timer_hwmod_class,
@@ -4417,59 +2988,14 @@ static struct omap_hwmod omap44xx_timer4_hwmod = {
 		},
 	},
 	.dev_attr	= &capability_alwon_dev_attr,
-	.slaves		= omap44xx_timer4_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_timer4_slaves),
 };
 
 /* timer5 */
-static struct omap_hwmod omap44xx_timer5_hwmod;
 static struct omap_hwmod_irq_info omap44xx_timer5_irqs[] = {
 	{ .irq = 41 + OMAP44XX_IRQ_GIC_START },
 	{ .irq = -1 }
 };
 
-static struct omap_hwmod_addr_space omap44xx_timer5_addrs[] = {
-	{
-		.pa_start	= 0x40138000,
-		.pa_end		= 0x4013807f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_abe -> timer5 */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer5 = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_timer5_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.addr		= omap44xx_timer5_addrs,
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_addr_space omap44xx_timer5_dma_addrs[] = {
-	{
-		.pa_start	= 0x49038000,
-		.pa_end		= 0x4903807f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_abe -> timer5 (dma) */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer5_dma = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_timer5_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.addr		= omap44xx_timer5_dma_addrs,
-	.user		= OCP_USER_SDMA,
-};
-
-/* timer5 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_timer5_slaves[] = {
-	&omap44xx_l4_abe__timer5,
-	&omap44xx_l4_abe__timer5_dma,
-};
-
 static struct omap_hwmod omap44xx_timer5_hwmod = {
 	.name		= "timer5",
 	.class		= &omap44xx_timer_hwmod_class,
@@ -4484,59 +3010,14 @@ static struct omap_hwmod omap44xx_timer5_hwmod = {
 		},
 	},
 	.dev_attr	= &capability_alwon_dev_attr,
-	.slaves		= omap44xx_timer5_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_timer5_slaves),
 };
 
 /* timer6 */
-static struct omap_hwmod omap44xx_timer6_hwmod;
 static struct omap_hwmod_irq_info omap44xx_timer6_irqs[] = {
 	{ .irq = 42 + OMAP44XX_IRQ_GIC_START },
 	{ .irq = -1 }
 };
 
-static struct omap_hwmod_addr_space omap44xx_timer6_addrs[] = {
-	{
-		.pa_start	= 0x4013a000,
-		.pa_end		= 0x4013a07f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_abe -> timer6 */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer6 = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_timer6_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.addr		= omap44xx_timer6_addrs,
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_addr_space omap44xx_timer6_dma_addrs[] = {
-	{
-		.pa_start	= 0x4903a000,
-		.pa_end		= 0x4903a07f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_abe -> timer6 (dma) */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer6_dma = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_timer6_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.addr		= omap44xx_timer6_dma_addrs,
-	.user		= OCP_USER_SDMA,
-};
-
-/* timer6 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_timer6_slaves[] = {
-	&omap44xx_l4_abe__timer6,
-	&omap44xx_l4_abe__timer6_dma,
-};
-
 static struct omap_hwmod omap44xx_timer6_hwmod = {
 	.name		= "timer6",
 	.class		= &omap44xx_timer_hwmod_class,
@@ -4552,59 +3033,14 @@ static struct omap_hwmod omap44xx_timer6_hwmod = {
 		},
 	},
 	.dev_attr	= &capability_alwon_dev_attr,
-	.slaves		= omap44xx_timer6_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_timer6_slaves),
 };
 
 /* timer7 */
-static struct omap_hwmod omap44xx_timer7_hwmod;
 static struct omap_hwmod_irq_info omap44xx_timer7_irqs[] = {
 	{ .irq = 43 + OMAP44XX_IRQ_GIC_START },
 	{ .irq = -1 }
 };
 
-static struct omap_hwmod_addr_space omap44xx_timer7_addrs[] = {
-	{
-		.pa_start	= 0x4013c000,
-		.pa_end		= 0x4013c07f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_abe -> timer7 */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer7 = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_timer7_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.addr		= omap44xx_timer7_addrs,
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_addr_space omap44xx_timer7_dma_addrs[] = {
-	{
-		.pa_start	= 0x4903c000,
-		.pa_end		= 0x4903c07f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_abe -> timer7 (dma) */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer7_dma = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_timer7_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.addr		= omap44xx_timer7_dma_addrs,
-	.user		= OCP_USER_SDMA,
-};
-
-/* timer7 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_timer7_slaves[] = {
-	&omap44xx_l4_abe__timer7,
-	&omap44xx_l4_abe__timer7_dma,
-};
-
 static struct omap_hwmod omap44xx_timer7_hwmod = {
 	.name		= "timer7",
 	.class		= &omap44xx_timer_hwmod_class,
@@ -4619,59 +3055,14 @@ static struct omap_hwmod omap44xx_timer7_hwmod = {
 		},
 	},
 	.dev_attr	= &capability_alwon_dev_attr,
-	.slaves		= omap44xx_timer7_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_timer7_slaves),
 };
 
 /* timer8 */
-static struct omap_hwmod omap44xx_timer8_hwmod;
 static struct omap_hwmod_irq_info omap44xx_timer8_irqs[] = {
 	{ .irq = 44 + OMAP44XX_IRQ_GIC_START },
 	{ .irq = -1 }
 };
 
-static struct omap_hwmod_addr_space omap44xx_timer8_addrs[] = {
-	{
-		.pa_start	= 0x4013e000,
-		.pa_end		= 0x4013e07f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_abe -> timer8 */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer8 = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_timer8_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.addr		= omap44xx_timer8_addrs,
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_addr_space omap44xx_timer8_dma_addrs[] = {
-	{
-		.pa_start	= 0x4903e000,
-		.pa_end		= 0x4903e07f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_abe -> timer8 (dma) */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer8_dma = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_timer8_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.addr		= omap44xx_timer8_dma_addrs,
-	.user		= OCP_USER_SDMA,
-};
-
-/* timer8 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_timer8_slaves[] = {
-	&omap44xx_l4_abe__timer8,
-	&omap44xx_l4_abe__timer8_dma,
-};
-
 static struct omap_hwmod omap44xx_timer8_hwmod = {
 	.name		= "timer8",
 	.class		= &omap44xx_timer_hwmod_class,
@@ -4686,40 +3077,14 @@ static struct omap_hwmod omap44xx_timer8_hwmod = {
 		},
 	},
 	.dev_attr	= &capability_pwm_dev_attr,
-	.slaves		= omap44xx_timer8_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_timer8_slaves),
 };
 
 /* timer9 */
-static struct omap_hwmod omap44xx_timer9_hwmod;
 static struct omap_hwmod_irq_info omap44xx_timer9_irqs[] = {
 	{ .irq = 45 + OMAP44XX_IRQ_GIC_START },
 	{ .irq = -1 }
 };
 
-static struct omap_hwmod_addr_space omap44xx_timer9_addrs[] = {
-	{
-		.pa_start	= 0x4803e000,
-		.pa_end		= 0x4803e07f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> timer9 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__timer9 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_timer9_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_timer9_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer9 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_timer9_slaves[] = {
-	&omap44xx_l4_per__timer9,
-};
-
 static struct omap_hwmod omap44xx_timer9_hwmod = {
 	.name		= "timer9",
 	.class		= &omap44xx_timer_hwmod_class,
@@ -4734,40 +3099,14 @@ static struct omap_hwmod omap44xx_timer9_hwmod = {
 		},
 	},
 	.dev_attr	= &capability_pwm_dev_attr,
-	.slaves		= omap44xx_timer9_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_timer9_slaves),
 };
 
 /* timer10 */
-static struct omap_hwmod omap44xx_timer10_hwmod;
 static struct omap_hwmod_irq_info omap44xx_timer10_irqs[] = {
 	{ .irq = 46 + OMAP44XX_IRQ_GIC_START },
 	{ .irq = -1 }
 };
 
-static struct omap_hwmod_addr_space omap44xx_timer10_addrs[] = {
-	{
-		.pa_start	= 0x48086000,
-		.pa_end		= 0x4808607f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> timer10 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__timer10 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_timer10_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_timer10_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer10 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_timer10_slaves[] = {
-	&omap44xx_l4_per__timer10,
-};
-
 static struct omap_hwmod omap44xx_timer10_hwmod = {
 	.name		= "timer10",
 	.class		= &omap44xx_timer_1ms_hwmod_class,
@@ -4782,40 +3121,14 @@ static struct omap_hwmod omap44xx_timer10_hwmod = {
 		},
 	},
 	.dev_attr	= &capability_pwm_dev_attr,
-	.slaves		= omap44xx_timer10_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_timer10_slaves),
 };
 
 /* timer11 */
-static struct omap_hwmod omap44xx_timer11_hwmod;
 static struct omap_hwmod_irq_info omap44xx_timer11_irqs[] = {
 	{ .irq = 47 + OMAP44XX_IRQ_GIC_START },
 	{ .irq = -1 }
 };
 
-static struct omap_hwmod_addr_space omap44xx_timer11_addrs[] = {
-	{
-		.pa_start	= 0x48088000,
-		.pa_end		= 0x4808807f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> timer11 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__timer11 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_timer11_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_timer11_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer11 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_timer11_slaves[] = {
-	&omap44xx_l4_per__timer11,
-};
-
 static struct omap_hwmod omap44xx_timer11_hwmod = {
 	.name		= "timer11",
 	.class		= &omap44xx_timer_hwmod_class,
@@ -4830,8 +3143,6 @@ static struct omap_hwmod omap44xx_timer11_hwmod = {
 		},
 	},
 	.dev_attr	= &capability_pwm_dev_attr,
-	.slaves		= omap44xx_timer11_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_timer11_slaves),
 };
 
 /*
@@ -4857,7 +3168,6 @@ static struct omap_hwmod_class omap44xx_uart_hwmod_class = {
 };
 
 /* uart1 */
-static struct omap_hwmod omap44xx_uart1_hwmod;
 static struct omap_hwmod_irq_info omap44xx_uart1_irqs[] = {
 	{ .irq = 72 + OMAP44XX_IRQ_GIC_START },
 	{ .irq = -1 }
@@ -4869,29 +3179,6 @@ static struct omap_hwmod_dma_info omap44xx_uart1_sdma_reqs[] = {
 	{ .dma_req = -1 }
 };
 
-static struct omap_hwmod_addr_space omap44xx_uart1_addrs[] = {
-	{
-		.pa_start	= 0x4806a000,
-		.pa_end		= 0x4806a0ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> uart1 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__uart1 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_uart1_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_uart1_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* uart1 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_uart1_slaves[] = {
-	&omap44xx_l4_per__uart1,
-};
-
 static struct omap_hwmod omap44xx_uart1_hwmod = {
 	.name		= "uart1",
 	.class		= &omap44xx_uart_hwmod_class,
@@ -4906,12 +3193,9 @@ static struct omap_hwmod omap44xx_uart1_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.slaves		= omap44xx_uart1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_uart1_slaves),
 };
 
 /* uart2 */
-static struct omap_hwmod omap44xx_uart2_hwmod;
 static struct omap_hwmod_irq_info omap44xx_uart2_irqs[] = {
 	{ .irq = 73 + OMAP44XX_IRQ_GIC_START },
 	{ .irq = -1 }
@@ -4923,29 +3207,6 @@ static struct omap_hwmod_dma_info omap44xx_uart2_sdma_reqs[] = {
 	{ .dma_req = -1 }
 };
 
-static struct omap_hwmod_addr_space omap44xx_uart2_addrs[] = {
-	{
-		.pa_start	= 0x4806c000,
-		.pa_end		= 0x4806c0ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> uart2 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__uart2 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_uart2_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_uart2_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* uart2 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_uart2_slaves[] = {
-	&omap44xx_l4_per__uart2,
-};
-
 static struct omap_hwmod omap44xx_uart2_hwmod = {
 	.name		= "uart2",
 	.class		= &omap44xx_uart_hwmod_class,
@@ -4960,12 +3221,9 @@ static struct omap_hwmod omap44xx_uart2_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.slaves		= omap44xx_uart2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_uart2_slaves),
 };
 
 /* uart3 */
-static struct omap_hwmod omap44xx_uart3_hwmod;
 static struct omap_hwmod_irq_info omap44xx_uart3_irqs[] = {
 	{ .irq = 74 + OMAP44XX_IRQ_GIC_START },
 	{ .irq = -1 }
@@ -4977,29 +3235,6 @@ static struct omap_hwmod_dma_info omap44xx_uart3_sdma_reqs[] = {
 	{ .dma_req = -1 }
 };
 
-static struct omap_hwmod_addr_space omap44xx_uart3_addrs[] = {
-	{
-		.pa_start	= 0x48020000,
-		.pa_end		= 0x480200ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> uart3 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__uart3 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_uart3_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_uart3_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* uart3 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_uart3_slaves[] = {
-	&omap44xx_l4_per__uart3,
-};
-
 static struct omap_hwmod omap44xx_uart3_hwmod = {
 	.name		= "uart3",
 	.class		= &omap44xx_uart_hwmod_class,
@@ -5015,12 +3250,9 @@ static struct omap_hwmod omap44xx_uart3_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.slaves		= omap44xx_uart3_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_uart3_slaves),
 };
 
 /* uart4 */
-static struct omap_hwmod omap44xx_uart4_hwmod;
 static struct omap_hwmod_irq_info omap44xx_uart4_irqs[] = {
 	{ .irq = 70 + OMAP44XX_IRQ_GIC_START },
 	{ .irq = -1 }
@@ -5032,29 +3264,6 @@ static struct omap_hwmod_dma_info omap44xx_uart4_sdma_reqs[] = {
 	{ .dma_req = -1 }
 };
 
-static struct omap_hwmod_addr_space omap44xx_uart4_addrs[] = {
-	{
-		.pa_start	= 0x4806e000,
-		.pa_end		= 0x4806e0ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> uart4 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__uart4 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_uart4_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_uart4_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* uart4 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_uart4_slaves[] = {
-	&omap44xx_l4_per__uart4,
-};
-
 static struct omap_hwmod omap44xx_uart4_hwmod = {
 	.name		= "uart4",
 	.class		= &omap44xx_uart_hwmod_class,
@@ -5069,8 +3278,147 @@ static struct omap_hwmod omap44xx_uart4_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.slaves		= omap44xx_uart4_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_uart4_slaves),
+};
+
+/*
+ * 'usb_host_fs' class
+ * full-speed usb host controller
+ */
+
+/* The IP is not compliant to type1 / type2 scheme */
+static struct omap_hwmod_sysc_fields omap_hwmod_sysc_type_usb_host_fs = {
+	.midle_shift	= 4,
+	.sidle_shift	= 2,
+	.srst_shift	= 1,
+};
+
+static struct omap_hwmod_class_sysconfig omap44xx_usb_host_fs_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0210,
+	.sysc_flags	= (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type_usb_host_fs,
+};
+
+static struct omap_hwmod_class omap44xx_usb_host_fs_hwmod_class = {
+	.name	= "usb_host_fs",
+	.sysc	= &omap44xx_usb_host_fs_sysc,
+};
+
+/* usb_host_fs */
+static struct omap_hwmod_irq_info omap44xx_usb_host_fs_irqs[] = {
+	{ .name = "std", .irq = 89 + OMAP44XX_IRQ_GIC_START },
+	{ .name = "smi", .irq = 90 + OMAP44XX_IRQ_GIC_START },
+	{ .irq = -1 }
+};
+
+static struct omap_hwmod omap44xx_usb_host_fs_hwmod = {
+	.name		= "usb_host_fs",
+	.class		= &omap44xx_usb_host_fs_hwmod_class,
+	.clkdm_name	= "l3_init_clkdm",
+	.mpu_irqs	= omap44xx_usb_host_fs_irqs,
+	.main_clk	= "usb_host_fs_fck",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = OMAP4_CM_L3INIT_USB_HOST_FS_CLKCTRL_OFFSET,
+			.context_offs = OMAP4_RM_L3INIT_USB_HOST_FS_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/*
+ * 'usb_host_hs' class
+ * high-speed multi-port usb host controller
+ */
+
+static struct omap_hwmod_class_sysconfig omap44xx_usb_host_hs_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
+			   MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class omap44xx_usb_host_hs_hwmod_class = {
+	.name	= "usb_host_hs",
+	.sysc	= &omap44xx_usb_host_hs_sysc,
+};
+
+/* usb_host_hs */
+static struct omap_hwmod_irq_info omap44xx_usb_host_hs_irqs[] = {
+	{ .name = "ohci-irq", .irq = 76 + OMAP44XX_IRQ_GIC_START },
+	{ .name = "ehci-irq", .irq = 77 + OMAP44XX_IRQ_GIC_START },
+	{ .irq = -1 }
+};
+
+static struct omap_hwmod omap44xx_usb_host_hs_hwmod = {
+	.name		= "usb_host_hs",
+	.class		= &omap44xx_usb_host_hs_hwmod_class,
+	.clkdm_name	= "l3_init_clkdm",
+	.main_clk	= "usb_host_hs_fck",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = OMAP4_CM_L3INIT_USB_HOST_CLKCTRL_OFFSET,
+			.context_offs = OMAP4_RM_L3INIT_USB_HOST_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.mpu_irqs	= omap44xx_usb_host_hs_irqs,
+
+	/*
+	 * Errata: USBHOST Configured In Smart-Idle Can Lead To a Deadlock
+	 * id: i660
+	 *
+	 * Description:
+	 * In the following configuration :
+	 * - USBHOST module is set to smart-idle mode
+	 * - PRCM asserts idle_req to the USBHOST module ( This typically
+	 *   happens when the system is going to a low power mode : all ports
+	 *   have been suspended, the master part of the USBHOST module has
+	 *   entered the standby state, and SW has cut the functional clocks)
+	 * - an USBHOST interrupt occurs before the module is able to answer
+	 *   idle_ack, typically a remote wakeup IRQ.
+	 * Then the USB HOST module will enter a deadlock situation where it
+	 * is no more accessible nor functional.
+	 *
+	 * Workaround:
+	 * Don't use smart idle; use only force idle, hence HWMOD_SWSUP_SIDLE
+	 */
+
+	/*
+	 * Errata: USB host EHCI may stall when entering smart-standby mode
+	 * Id: i571
+	 *
+	 * Description:
+	 * When the USBHOST module is set to smart-standby mode, and when it is
+	 * ready to enter the standby state (i.e. all ports are suspended and
+	 * all attached devices are in suspend mode), then it can wrongly assert
+	 * the Mstandby signal too early while there are still some residual OCP
+	 * transactions ongoing. If this condition occurs, the internal state
+	 * machine may go to an undefined state and the USB link may be stuck
+	 * upon the next resume.
+	 *
+	 * Workaround:
+	 * Don't use smart standby; use only force standby,
+	 * hence HWMOD_SWSUP_MSTANDBY
+	 */
+
+	/*
+	 * During system boot; If the hwmod framework resets the module
+	 * the module will have smart idle settings; which can lead to deadlock
+	 * (above Errata Id:i660); so, dont reset the module during boot;
+	 * Use HWMOD_INIT_NO_RESET.
+	 */
+
+	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY |
+			  HWMOD_INIT_NO_RESET,
 };
 
 /*
@@ -5103,34 +3451,6 @@ static struct omap_hwmod_irq_info omap44xx_usb_otg_hs_irqs[] = {
 	{ .irq = -1 }
 };
 
-/* usb_otg_hs master ports */
-static struct omap_hwmod_ocp_if *omap44xx_usb_otg_hs_masters[] = {
-	&omap44xx_usb_otg_hs__l3_main_2,
-};
-
-static struct omap_hwmod_addr_space omap44xx_usb_otg_hs_addrs[] = {
-	{
-		.pa_start	= 0x4a0ab000,
-		.pa_end		= 0x4a0ab003,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_cfg -> usb_otg_hs */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_otg_hs = {
-	.master		= &omap44xx_l4_cfg_hwmod,
-	.slave		= &omap44xx_usb_otg_hs_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_usb_otg_hs_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* usb_otg_hs slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_usb_otg_hs_slaves[] = {
-	&omap44xx_l4_cfg__usb_otg_hs,
-};
-
 static struct omap_hwmod_opt_clk usb_otg_hs_opt_clks[] = {
 	{ .role = "xclk", .clk = "usb_otg_hs_xclk" },
 };
@@ -5151,10 +3471,47 @@ static struct omap_hwmod omap44xx_usb_otg_hs_hwmod = {
 	},
 	.opt_clks	= usb_otg_hs_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(usb_otg_hs_opt_clks),
-	.slaves		= omap44xx_usb_otg_hs_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_usb_otg_hs_slaves),
-	.masters	= omap44xx_usb_otg_hs_masters,
-	.masters_cnt	= ARRAY_SIZE(omap44xx_usb_otg_hs_masters),
+};
+
+/*
+ * 'usb_tll_hs' class
+ * usb_tll_hs module is the adapter on the usb_host_hs ports
+ */
+
+static struct omap_hwmod_class_sysconfig omap44xx_usb_tll_hs_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
+			   SYSC_HAS_AUTOIDLE),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap44xx_usb_tll_hs_hwmod_class = {
+	.name	= "usb_tll_hs",
+	.sysc	= &omap44xx_usb_tll_hs_sysc,
+};
+
+static struct omap_hwmod_irq_info omap44xx_usb_tll_hs_irqs[] = {
+	{ .name = "tll-irq", .irq = 78 + OMAP44XX_IRQ_GIC_START },
+	{ .irq = -1 }
+};
+
+static struct omap_hwmod omap44xx_usb_tll_hs_hwmod = {
+	.name		= "usb_tll_hs",
+	.class		= &omap44xx_usb_tll_hs_hwmod_class,
+	.clkdm_name	= "l3_init_clkdm",
+	.mpu_irqs	= omap44xx_usb_tll_hs_irqs,
+	.main_clk	= "usb_tll_hs_ick",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = OMAP4_CM_L3INIT_USB_TLL_CLKCTRL_OFFSET,
+			.context_offs = OMAP4_RM_L3INIT_USB_TLL_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
 };
 
 /*
@@ -5178,38 +3535,15 @@ static struct omap_hwmod_class omap44xx_wd_timer_hwmod_class = {
 	.name		= "wd_timer",
 	.sysc		= &omap44xx_wd_timer_sysc,
 	.pre_shutdown	= &omap2_wd_timer_disable,
+	.reset		= &omap2_wd_timer_reset,
 };
 
 /* wd_timer2 */
-static struct omap_hwmod omap44xx_wd_timer2_hwmod;
 static struct omap_hwmod_irq_info omap44xx_wd_timer2_irqs[] = {
 	{ .irq = 80 + OMAP44XX_IRQ_GIC_START },
 	{ .irq = -1 }
 };
 
-static struct omap_hwmod_addr_space omap44xx_wd_timer2_addrs[] = {
-	{
-		.pa_start	= 0x4a314000,
-		.pa_end		= 0x4a31407f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_wkup -> wd_timer2 */
-static struct omap_hwmod_ocp_if omap44xx_l4_wkup__wd_timer2 = {
-	.master		= &omap44xx_l4_wkup_hwmod,
-	.slave		= &omap44xx_wd_timer2_hwmod,
-	.clk		= "l4_wkup_clk_mux_ck",
-	.addr		= omap44xx_wd_timer2_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* wd_timer2 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_wd_timer2_slaves[] = {
-	&omap44xx_l4_wkup__wd_timer2,
-};
-
 static struct omap_hwmod omap44xx_wd_timer2_hwmod = {
 	.name		= "wd_timer2",
 	.class		= &omap44xx_wd_timer_hwmod_class,
@@ -5223,106 +3557,2308 @@ static struct omap_hwmod omap44xx_wd_timer2_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.slaves		= omap44xx_wd_timer2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_wd_timer2_slaves),
 };
 
 /* wd_timer3 */
-static struct omap_hwmod omap44xx_wd_timer3_hwmod;
 static struct omap_hwmod_irq_info omap44xx_wd_timer3_irqs[] = {
 	{ .irq = 36 + OMAP44XX_IRQ_GIC_START },
 	{ .irq = -1 }
 };
 
-static struct omap_hwmod_addr_space omap44xx_wd_timer3_addrs[] = {
+static struct omap_hwmod omap44xx_wd_timer3_hwmod = {
+	.name		= "wd_timer3",
+	.class		= &omap44xx_wd_timer_hwmod_class,
+	.clkdm_name	= "abe_clkdm",
+	.mpu_irqs	= omap44xx_wd_timer3_irqs,
+	.main_clk	= "wd_timer3_fck",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = OMAP4_CM1_ABE_WDT3_CLKCTRL_OFFSET,
+			.context_offs = OMAP4_RM_ABE_WDT3_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+
+/*
+ * interfaces
+ */
+
+static struct omap_hwmod_addr_space omap44xx_c2c_target_fw_addrs[] = {
 	{
-		.pa_start	= 0x40130000,
-		.pa_end		= 0x4013007f,
+		.pa_start	= 0x4a204000,
+		.pa_end		= 0x4a2040ff,
 		.flags		= ADDR_TYPE_RT
 	},
 	{ }
 };
 
-/* l4_abe -> wd_timer3 */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__wd_timer3 = {
+/* c2c -> c2c_target_fw */
+static struct omap_hwmod_ocp_if omap44xx_c2c__c2c_target_fw = {
+	.master		= &omap44xx_c2c_hwmod,
+	.slave		= &omap44xx_c2c_target_fw_hwmod,
+	.clk		= "div_core_ck",
+	.addr		= omap44xx_c2c_target_fw_addrs,
+	.user		= OCP_USER_MPU,
+};
+
+/* l4_cfg -> c2c_target_fw */
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__c2c_target_fw = {
+	.master		= &omap44xx_l4_cfg_hwmod,
+	.slave		= &omap44xx_c2c_target_fw_hwmod,
+	.clk		= "l4_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_1 -> dmm */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_1__dmm = {
+	.master		= &omap44xx_l3_main_1_hwmod,
+	.slave		= &omap44xx_dmm_hwmod,
+	.clk		= "l3_div_ck",
+	.user		= OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_dmm_addrs[] = {
+	{
+		.pa_start	= 0x4e000000,
+		.pa_end		= 0x4e0007ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* mpu -> dmm */
+static struct omap_hwmod_ocp_if omap44xx_mpu__dmm = {
+	.master		= &omap44xx_mpu_hwmod,
+	.slave		= &omap44xx_dmm_hwmod,
+	.clk		= "l3_div_ck",
+	.addr		= omap44xx_dmm_addrs,
+	.user		= OCP_USER_MPU,
+};
+
+/* c2c -> emif_fw */
+static struct omap_hwmod_ocp_if omap44xx_c2c__emif_fw = {
+	.master		= &omap44xx_c2c_hwmod,
+	.slave		= &omap44xx_emif_fw_hwmod,
+	.clk		= "div_core_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* dmm -> emif_fw */
+static struct omap_hwmod_ocp_if omap44xx_dmm__emif_fw = {
+	.master		= &omap44xx_dmm_hwmod,
+	.slave		= &omap44xx_emif_fw_hwmod,
+	.clk		= "l3_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_emif_fw_addrs[] = {
+	{
+		.pa_start	= 0x4a20c000,
+		.pa_end		= 0x4a20c0ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_cfg -> emif_fw */
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__emif_fw = {
+	.master		= &omap44xx_l4_cfg_hwmod,
+	.slave		= &omap44xx_emif_fw_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_emif_fw_addrs,
+	.user		= OCP_USER_MPU,
+};
+
+/* iva -> l3_instr */
+static struct omap_hwmod_ocp_if omap44xx_iva__l3_instr = {
+	.master		= &omap44xx_iva_hwmod,
+	.slave		= &omap44xx_l3_instr_hwmod,
+	.clk		= "l3_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_3 -> l3_instr */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_3__l3_instr = {
+	.master		= &omap44xx_l3_main_3_hwmod,
+	.slave		= &omap44xx_l3_instr_hwmod,
+	.clk		= "l3_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* ocp_wp_noc -> l3_instr */
+static struct omap_hwmod_ocp_if omap44xx_ocp_wp_noc__l3_instr = {
+	.master		= &omap44xx_ocp_wp_noc_hwmod,
+	.slave		= &omap44xx_l3_instr_hwmod,
+	.clk		= "l3_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* dsp -> l3_main_1 */
+static struct omap_hwmod_ocp_if omap44xx_dsp__l3_main_1 = {
+	.master		= &omap44xx_dsp_hwmod,
+	.slave		= &omap44xx_l3_main_1_hwmod,
+	.clk		= "l3_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* dss -> l3_main_1 */
+static struct omap_hwmod_ocp_if omap44xx_dss__l3_main_1 = {
+	.master		= &omap44xx_dss_hwmod,
+	.slave		= &omap44xx_l3_main_1_hwmod,
+	.clk		= "l3_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_2 -> l3_main_1 */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_2__l3_main_1 = {
+	.master		= &omap44xx_l3_main_2_hwmod,
+	.slave		= &omap44xx_l3_main_1_hwmod,
+	.clk		= "l3_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_cfg -> l3_main_1 */
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_1 = {
+	.master		= &omap44xx_l4_cfg_hwmod,
+	.slave		= &omap44xx_l3_main_1_hwmod,
+	.clk		= "l4_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* mmc1 -> l3_main_1 */
+static struct omap_hwmod_ocp_if omap44xx_mmc1__l3_main_1 = {
+	.master		= &omap44xx_mmc1_hwmod,
+	.slave		= &omap44xx_l3_main_1_hwmod,
+	.clk		= "l3_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* mmc2 -> l3_main_1 */
+static struct omap_hwmod_ocp_if omap44xx_mmc2__l3_main_1 = {
+	.master		= &omap44xx_mmc2_hwmod,
+	.slave		= &omap44xx_l3_main_1_hwmod,
+	.clk		= "l3_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_l3_main_1_addrs[] = {
+	{
+		.pa_start	= 0x44000000,
+		.pa_end		= 0x44000fff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* mpu -> l3_main_1 */
+static struct omap_hwmod_ocp_if omap44xx_mpu__l3_main_1 = {
+	.master		= &omap44xx_mpu_hwmod,
+	.slave		= &omap44xx_l3_main_1_hwmod,
+	.clk		= "l3_div_ck",
+	.addr		= omap44xx_l3_main_1_addrs,
+	.user		= OCP_USER_MPU,
+};
+
+/* c2c_target_fw -> l3_main_2 */
+static struct omap_hwmod_ocp_if omap44xx_c2c_target_fw__l3_main_2 = {
+	.master		= &omap44xx_c2c_target_fw_hwmod,
+	.slave		= &omap44xx_l3_main_2_hwmod,
+	.clk		= "l3_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* debugss -> l3_main_2 */
+static struct omap_hwmod_ocp_if omap44xx_debugss__l3_main_2 = {
+	.master		= &omap44xx_debugss_hwmod,
+	.slave		= &omap44xx_l3_main_2_hwmod,
+	.clk		= "dbgclk_mux_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* dma_system -> l3_main_2 */
+static struct omap_hwmod_ocp_if omap44xx_dma_system__l3_main_2 = {
+	.master		= &omap44xx_dma_system_hwmod,
+	.slave		= &omap44xx_l3_main_2_hwmod,
+	.clk		= "l3_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* fdif -> l3_main_2 */
+static struct omap_hwmod_ocp_if omap44xx_fdif__l3_main_2 = {
+	.master		= &omap44xx_fdif_hwmod,
+	.slave		= &omap44xx_l3_main_2_hwmod,
+	.clk		= "l3_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* gpu -> l3_main_2 */
+static struct omap_hwmod_ocp_if omap44xx_gpu__l3_main_2 = {
+	.master		= &omap44xx_gpu_hwmod,
+	.slave		= &omap44xx_l3_main_2_hwmod,
+	.clk		= "l3_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* hsi -> l3_main_2 */
+static struct omap_hwmod_ocp_if omap44xx_hsi__l3_main_2 = {
+	.master		= &omap44xx_hsi_hwmod,
+	.slave		= &omap44xx_l3_main_2_hwmod,
+	.clk		= "l3_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* ipu -> l3_main_2 */
+static struct omap_hwmod_ocp_if omap44xx_ipu__l3_main_2 = {
+	.master		= &omap44xx_ipu_hwmod,
+	.slave		= &omap44xx_l3_main_2_hwmod,
+	.clk		= "l3_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* iss -> l3_main_2 */
+static struct omap_hwmod_ocp_if omap44xx_iss__l3_main_2 = {
+	.master		= &omap44xx_iss_hwmod,
+	.slave		= &omap44xx_l3_main_2_hwmod,
+	.clk		= "l3_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* iva -> l3_main_2 */
+static struct omap_hwmod_ocp_if omap44xx_iva__l3_main_2 = {
+	.master		= &omap44xx_iva_hwmod,
+	.slave		= &omap44xx_l3_main_2_hwmod,
+	.clk		= "l3_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_l3_main_2_addrs[] = {
+	{
+		.pa_start	= 0x44800000,
+		.pa_end		= 0x44801fff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l3_main_1 -> l3_main_2 */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l3_main_2 = {
+	.master		= &omap44xx_l3_main_1_hwmod,
+	.slave		= &omap44xx_l3_main_2_hwmod,
+	.clk		= "l3_div_ck",
+	.addr		= omap44xx_l3_main_2_addrs,
+	.user		= OCP_USER_MPU,
+};
+
+/* l4_cfg -> l3_main_2 */
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_2 = {
+	.master		= &omap44xx_l4_cfg_hwmod,
+	.slave		= &omap44xx_l3_main_2_hwmod,
+	.clk		= "l4_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* usb_host_fs -> l3_main_2 */
+static struct omap_hwmod_ocp_if omap44xx_usb_host_fs__l3_main_2 = {
+	.master		= &omap44xx_usb_host_fs_hwmod,
+	.slave		= &omap44xx_l3_main_2_hwmod,
+	.clk		= "l3_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* usb_host_hs -> l3_main_2 */
+static struct omap_hwmod_ocp_if omap44xx_usb_host_hs__l3_main_2 = {
+	.master		= &omap44xx_usb_host_hs_hwmod,
+	.slave		= &omap44xx_l3_main_2_hwmod,
+	.clk		= "l3_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* usb_otg_hs -> l3_main_2 */
+static struct omap_hwmod_ocp_if omap44xx_usb_otg_hs__l3_main_2 = {
+	.master		= &omap44xx_usb_otg_hs_hwmod,
+	.slave		= &omap44xx_l3_main_2_hwmod,
+	.clk		= "l3_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_l3_main_3_addrs[] = {
+	{
+		.pa_start	= 0x45000000,
+		.pa_end		= 0x45000fff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l3_main_1 -> l3_main_3 */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l3_main_3 = {
+	.master		= &omap44xx_l3_main_1_hwmod,
+	.slave		= &omap44xx_l3_main_3_hwmod,
+	.clk		= "l3_div_ck",
+	.addr		= omap44xx_l3_main_3_addrs,
+	.user		= OCP_USER_MPU,
+};
+
+/* l3_main_2 -> l3_main_3 */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_2__l3_main_3 = {
+	.master		= &omap44xx_l3_main_2_hwmod,
+	.slave		= &omap44xx_l3_main_3_hwmod,
+	.clk		= "l3_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_cfg -> l3_main_3 */
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_3 = {
+	.master		= &omap44xx_l4_cfg_hwmod,
+	.slave		= &omap44xx_l3_main_3_hwmod,
+	.clk		= "l4_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* aess -> l4_abe */
+static struct omap_hwmod_ocp_if omap44xx_aess__l4_abe = {
+	.master		= &omap44xx_aess_hwmod,
+	.slave		= &omap44xx_l4_abe_hwmod,
+	.clk		= "ocp_abe_iclk",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* dsp -> l4_abe */
+static struct omap_hwmod_ocp_if omap44xx_dsp__l4_abe = {
+	.master		= &omap44xx_dsp_hwmod,
+	.slave		= &omap44xx_l4_abe_hwmod,
+	.clk		= "ocp_abe_iclk",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_1 -> l4_abe */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l4_abe = {
+	.master		= &omap44xx_l3_main_1_hwmod,
+	.slave		= &omap44xx_l4_abe_hwmod,
+	.clk		= "l3_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* mpu -> l4_abe */
+static struct omap_hwmod_ocp_if omap44xx_mpu__l4_abe = {
+	.master		= &omap44xx_mpu_hwmod,
+	.slave		= &omap44xx_l4_abe_hwmod,
+	.clk		= "ocp_abe_iclk",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_1 -> l4_cfg */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l4_cfg = {
+	.master		= &omap44xx_l3_main_1_hwmod,
+	.slave		= &omap44xx_l4_cfg_hwmod,
+	.clk		= "l3_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_2 -> l4_per */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_2__l4_per = {
+	.master		= &omap44xx_l3_main_2_hwmod,
+	.slave		= &omap44xx_l4_per_hwmod,
+	.clk		= "l3_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_cfg -> l4_wkup */
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l4_wkup = {
+	.master		= &omap44xx_l4_cfg_hwmod,
+	.slave		= &omap44xx_l4_wkup_hwmod,
+	.clk		= "l4_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* mpu -> mpu_private */
+static struct omap_hwmod_ocp_if omap44xx_mpu__mpu_private = {
+	.master		= &omap44xx_mpu_hwmod,
+	.slave		= &omap44xx_mpu_private_hwmod,
+	.clk		= "l3_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_ocp_wp_noc_addrs[] = {
+	{
+		.pa_start	= 0x4a102000,
+		.pa_end		= 0x4a10207f,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_cfg -> ocp_wp_noc */
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__ocp_wp_noc = {
+	.master		= &omap44xx_l4_cfg_hwmod,
+	.slave		= &omap44xx_ocp_wp_noc_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_ocp_wp_noc_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_aess_addrs[] = {
+	{
+		.pa_start	= 0x401f1000,
+		.pa_end		= 0x401f13ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_abe -> aess */
+static struct omap_hwmod_ocp_if omap44xx_l4_abe__aess = {
 	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_wd_timer3_hwmod,
+	.slave		= &omap44xx_aess_hwmod,
 	.clk		= "ocp_abe_iclk",
-	.addr		= omap44xx_wd_timer3_addrs,
+	.addr		= omap44xx_aess_addrs,
 	.user		= OCP_USER_MPU,
 };
 
-static struct omap_hwmod_addr_space omap44xx_wd_timer3_dma_addrs[] = {
+static struct omap_hwmod_addr_space omap44xx_aess_dma_addrs[] = {
 	{
-		.pa_start	= 0x49030000,
-		.pa_end		= 0x4903007f,
+		.pa_start	= 0x490f1000,
+		.pa_end		= 0x490f13ff,
 		.flags		= ADDR_TYPE_RT
 	},
 	{ }
 };
 
-/* l4_abe -> wd_timer3 (dma) */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__wd_timer3_dma = {
+/* l4_abe -> aess (dma) */
+static struct omap_hwmod_ocp_if omap44xx_l4_abe__aess_dma = {
 	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_wd_timer3_hwmod,
+	.slave		= &omap44xx_aess_hwmod,
 	.clk		= "ocp_abe_iclk",
-	.addr		= omap44xx_wd_timer3_dma_addrs,
+	.addr		= omap44xx_aess_dma_addrs,
 	.user		= OCP_USER_SDMA,
 };
 
-/* wd_timer3 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_wd_timer3_slaves[] = {
-	&omap44xx_l4_abe__wd_timer3,
-	&omap44xx_l4_abe__wd_timer3_dma,
+/* l3_main_2 -> c2c */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_2__c2c = {
+	.master		= &omap44xx_l3_main_2_hwmod,
+	.slave		= &omap44xx_c2c_hwmod,
+	.clk		= "l3_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-static struct omap_hwmod omap44xx_wd_timer3_hwmod = {
-	.name		= "wd_timer3",
-	.class		= &omap44xx_wd_timer_hwmod_class,
-	.clkdm_name	= "abe_clkdm",
-	.mpu_irqs	= omap44xx_wd_timer3_irqs,
-	.main_clk	= "wd_timer3_fck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM1_ABE_WDT3_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_ABE_WDT3_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
+static struct omap_hwmod_addr_space omap44xx_counter_32k_addrs[] = {
+	{
+		.pa_start	= 0x4a304000,
+		.pa_end		= 0x4a30401f,
+		.flags		= ADDR_TYPE_RT
 	},
-	.slaves		= omap44xx_wd_timer3_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_wd_timer3_slaves),
+	{ }
 };
 
-/*
- * 'usb_host_hs' class
- * high-speed multi-port usb host controller
- */
-static struct omap_hwmod_ocp_if omap44xx_usb_host_hs__l3_main_2 = {
-	.master		= &omap44xx_usb_host_hs_hwmod,
-	.slave		= &omap44xx_l3_main_2_hwmod,
+/* l4_wkup -> counter_32k */
+static struct omap_hwmod_ocp_if omap44xx_l4_wkup__counter_32k = {
+	.master		= &omap44xx_l4_wkup_hwmod,
+	.slave		= &omap44xx_counter_32k_hwmod,
+	.clk		= "l4_wkup_clk_mux_ck",
+	.addr		= omap44xx_counter_32k_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_ctrl_module_core_addrs[] = {
+	{
+		.pa_start	= 0x4a002000,
+		.pa_end		= 0x4a0027ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_cfg -> ctrl_module_core */
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__ctrl_module_core = {
+	.master		= &omap44xx_l4_cfg_hwmod,
+	.slave		= &omap44xx_ctrl_module_core_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_ctrl_module_core_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_ctrl_module_pad_core_addrs[] = {
+	{
+		.pa_start	= 0x4a100000,
+		.pa_end		= 0x4a1007ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_cfg -> ctrl_module_pad_core */
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__ctrl_module_pad_core = {
+	.master		= &omap44xx_l4_cfg_hwmod,
+	.slave		= &omap44xx_ctrl_module_pad_core_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_ctrl_module_pad_core_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_ctrl_module_wkup_addrs[] = {
+	{
+		.pa_start	= 0x4a30c000,
+		.pa_end		= 0x4a30c7ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_wkup -> ctrl_module_wkup */
+static struct omap_hwmod_ocp_if omap44xx_l4_wkup__ctrl_module_wkup = {
+	.master		= &omap44xx_l4_wkup_hwmod,
+	.slave		= &omap44xx_ctrl_module_wkup_hwmod,
+	.clk		= "l4_wkup_clk_mux_ck",
+	.addr		= omap44xx_ctrl_module_wkup_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_ctrl_module_pad_wkup_addrs[] = {
+	{
+		.pa_start	= 0x4a31e000,
+		.pa_end		= 0x4a31e7ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_wkup -> ctrl_module_pad_wkup */
+static struct omap_hwmod_ocp_if omap44xx_l4_wkup__ctrl_module_pad_wkup = {
+	.master		= &omap44xx_l4_wkup_hwmod,
+	.slave		= &omap44xx_ctrl_module_pad_wkup_hwmod,
+	.clk		= "l4_wkup_clk_mux_ck",
+	.addr		= omap44xx_ctrl_module_pad_wkup_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_debugss_addrs[] = {
+	{
+		.pa_start	= 0x54160000,
+		.pa_end		= 0x54167fff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l3_instr -> debugss */
+static struct omap_hwmod_ocp_if omap44xx_l3_instr__debugss = {
+	.master		= &omap44xx_l3_instr_hwmod,
+	.slave		= &omap44xx_debugss_hwmod,
 	.clk		= "l3_div_ck",
+	.addr		= omap44xx_debugss_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-static struct omap_hwmod_class_sysconfig omap44xx_usb_host_hs_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE |
-			   SYSC_HAS_SOFTRESET),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
-			   MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type2,
+static struct omap_hwmod_addr_space omap44xx_dma_system_addrs[] = {
+	{
+		.pa_start	= 0x4a056000,
+		.pa_end		= 0x4a056fff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
 };
 
-static struct omap_hwmod_class omap44xx_usb_host_hs_hwmod_class = {
-	.name = "usb_host_hs",
-	.sysc = &omap44xx_usb_host_hs_sysc,
+/* l4_cfg -> dma_system */
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__dma_system = {
+	.master		= &omap44xx_l4_cfg_hwmod,
+	.slave		= &omap44xx_dma_system_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_dma_system_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-static struct omap_hwmod_ocp_if *omap44xx_usb_host_hs_masters[] = {
-	&omap44xx_usb_host_hs__l3_main_2,
+static struct omap_hwmod_addr_space omap44xx_dmic_addrs[] = {
+	{
+		.name		= "mpu",
+		.pa_start	= 0x4012e000,
+		.pa_end		= 0x4012e07f,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_abe -> dmic */
+static struct omap_hwmod_ocp_if omap44xx_l4_abe__dmic = {
+	.master		= &omap44xx_l4_abe_hwmod,
+	.slave		= &omap44xx_dmic_hwmod,
+	.clk		= "ocp_abe_iclk",
+	.addr		= omap44xx_dmic_addrs,
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space omap44xx_dmic_dma_addrs[] = {
+	{
+		.name		= "dma",
+		.pa_start	= 0x4902e000,
+		.pa_end		= 0x4902e07f,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_abe -> dmic (dma) */
+static struct omap_hwmod_ocp_if omap44xx_l4_abe__dmic_dma = {
+	.master		= &omap44xx_l4_abe_hwmod,
+	.slave		= &omap44xx_dmic_hwmod,
+	.clk		= "ocp_abe_iclk",
+	.addr		= omap44xx_dmic_dma_addrs,
+	.user		= OCP_USER_SDMA,
+};
+
+/* dsp -> iva */
+static struct omap_hwmod_ocp_if omap44xx_dsp__iva = {
+	.master		= &omap44xx_dsp_hwmod,
+	.slave		= &omap44xx_iva_hwmod,
+	.clk		= "dpll_iva_m5x2_ck",
+	.user		= OCP_USER_DSP,
+};
+
+/* dsp -> sl2if */
+static struct omap_hwmod_ocp_if omap44xx_dsp__sl2if = {
+	.master		= &omap44xx_dsp_hwmod,
+	.slave		= &omap44xx_sl2if_hwmod,
+	.clk		= "dpll_iva_m5x2_ck",
+	.user		= OCP_USER_DSP,
+};
+
+/* l4_cfg -> dsp */
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__dsp = {
+	.master		= &omap44xx_l4_cfg_hwmod,
+	.slave		= &omap44xx_dsp_hwmod,
+	.clk		= "l4_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_dss_dma_addrs[] = {
+	{
+		.pa_start	= 0x58000000,
+		.pa_end		= 0x5800007f,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l3_main_2 -> dss */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss = {
+	.master		= &omap44xx_l3_main_2_hwmod,
+	.slave		= &omap44xx_dss_hwmod,
+	.clk		= "dss_fck",
+	.addr		= omap44xx_dss_dma_addrs,
+	.user		= OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_dss_addrs[] = {
+	{
+		.pa_start	= 0x48040000,
+		.pa_end		= 0x4804007f,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_per -> dss */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__dss = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_dss_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_dss_addrs,
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space omap44xx_dss_dispc_dma_addrs[] = {
+	{
+		.pa_start	= 0x58001000,
+		.pa_end		= 0x58001fff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l3_main_2 -> dss_dispc */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_dispc = {
+	.master		= &omap44xx_l3_main_2_hwmod,
+	.slave		= &omap44xx_dss_dispc_hwmod,
+	.clk		= "dss_fck",
+	.addr		= omap44xx_dss_dispc_dma_addrs,
+	.user		= OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_dss_dispc_addrs[] = {
+	{
+		.pa_start	= 0x48041000,
+		.pa_end		= 0x48041fff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_per -> dss_dispc */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_dispc = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_dss_dispc_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_dss_dispc_addrs,
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space omap44xx_dss_dsi1_dma_addrs[] = {
+	{
+		.pa_start	= 0x58004000,
+		.pa_end		= 0x580041ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l3_main_2 -> dss_dsi1 */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_dsi1 = {
+	.master		= &omap44xx_l3_main_2_hwmod,
+	.slave		= &omap44xx_dss_dsi1_hwmod,
+	.clk		= "dss_fck",
+	.addr		= omap44xx_dss_dsi1_dma_addrs,
+	.user		= OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_dss_dsi1_addrs[] = {
+	{
+		.pa_start	= 0x48044000,
+		.pa_end		= 0x480441ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_per -> dss_dsi1 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_dsi1 = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_dss_dsi1_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_dss_dsi1_addrs,
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space omap44xx_dss_dsi2_dma_addrs[] = {
+	{
+		.pa_start	= 0x58005000,
+		.pa_end		= 0x580051ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l3_main_2 -> dss_dsi2 */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_dsi2 = {
+	.master		= &omap44xx_l3_main_2_hwmod,
+	.slave		= &omap44xx_dss_dsi2_hwmod,
+	.clk		= "dss_fck",
+	.addr		= omap44xx_dss_dsi2_dma_addrs,
+	.user		= OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_dss_dsi2_addrs[] = {
+	{
+		.pa_start	= 0x48045000,
+		.pa_end		= 0x480451ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_per -> dss_dsi2 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_dsi2 = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_dss_dsi2_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_dss_dsi2_addrs,
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space omap44xx_dss_hdmi_dma_addrs[] = {
+	{
+		.pa_start	= 0x58006000,
+		.pa_end		= 0x58006fff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l3_main_2 -> dss_hdmi */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_hdmi = {
+	.master		= &omap44xx_l3_main_2_hwmod,
+	.slave		= &omap44xx_dss_hdmi_hwmod,
+	.clk		= "dss_fck",
+	.addr		= omap44xx_dss_hdmi_dma_addrs,
+	.user		= OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_dss_hdmi_addrs[] = {
+	{
+		.pa_start	= 0x48046000,
+		.pa_end		= 0x48046fff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_per -> dss_hdmi */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_hdmi = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_dss_hdmi_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_dss_hdmi_addrs,
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space omap44xx_dss_rfbi_dma_addrs[] = {
+	{
+		.pa_start	= 0x58002000,
+		.pa_end		= 0x580020ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l3_main_2 -> dss_rfbi */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_rfbi = {
+	.master		= &omap44xx_l3_main_2_hwmod,
+	.slave		= &omap44xx_dss_rfbi_hwmod,
+	.clk		= "dss_fck",
+	.addr		= omap44xx_dss_rfbi_dma_addrs,
+	.user		= OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_dss_rfbi_addrs[] = {
+	{
+		.pa_start	= 0x48042000,
+		.pa_end		= 0x480420ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_per -> dss_rfbi */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_rfbi = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_dss_rfbi_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_dss_rfbi_addrs,
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space omap44xx_dss_venc_dma_addrs[] = {
+	{
+		.pa_start	= 0x58003000,
+		.pa_end		= 0x580030ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l3_main_2 -> dss_venc */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_venc = {
+	.master		= &omap44xx_l3_main_2_hwmod,
+	.slave		= &omap44xx_dss_venc_hwmod,
+	.clk		= "dss_fck",
+	.addr		= omap44xx_dss_venc_dma_addrs,
+	.user		= OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_dss_venc_addrs[] = {
+	{
+		.pa_start	= 0x48043000,
+		.pa_end		= 0x480430ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_per -> dss_venc */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_venc = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_dss_venc_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_dss_venc_addrs,
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space omap44xx_elm_addrs[] = {
+	{
+		.pa_start	= 0x48078000,
+		.pa_end		= 0x48078fff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_per -> elm */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__elm = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_elm_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_elm_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_emif1_addrs[] = {
+	{
+		.pa_start	= 0x4c000000,
+		.pa_end		= 0x4c0000ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* emif_fw -> emif1 */
+static struct omap_hwmod_ocp_if omap44xx_emif_fw__emif1 = {
+	.master		= &omap44xx_emif_fw_hwmod,
+	.slave		= &omap44xx_emif1_hwmod,
+	.clk		= "l3_div_ck",
+	.addr		= omap44xx_emif1_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_emif2_addrs[] = {
+	{
+		.pa_start	= 0x4d000000,
+		.pa_end		= 0x4d0000ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* emif_fw -> emif2 */
+static struct omap_hwmod_ocp_if omap44xx_emif_fw__emif2 = {
+	.master		= &omap44xx_emif_fw_hwmod,
+	.slave		= &omap44xx_emif2_hwmod,
+	.clk		= "l3_div_ck",
+	.addr		= omap44xx_emif2_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_fdif_addrs[] = {
+	{
+		.pa_start	= 0x4a10a000,
+		.pa_end		= 0x4a10a1ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_cfg -> fdif */
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__fdif = {
+	.master		= &omap44xx_l4_cfg_hwmod,
+	.slave		= &omap44xx_fdif_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_fdif_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_gpio1_addrs[] = {
+	{
+		.pa_start	= 0x4a310000,
+		.pa_end		= 0x4a3101ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_wkup -> gpio1 */
+static struct omap_hwmod_ocp_if omap44xx_l4_wkup__gpio1 = {
+	.master		= &omap44xx_l4_wkup_hwmod,
+	.slave		= &omap44xx_gpio1_hwmod,
+	.clk		= "l4_wkup_clk_mux_ck",
+	.addr		= omap44xx_gpio1_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_gpio2_addrs[] = {
+	{
+		.pa_start	= 0x48055000,
+		.pa_end		= 0x480551ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_per -> gpio2 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio2 = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_gpio2_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_gpio2_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_gpio3_addrs[] = {
+	{
+		.pa_start	= 0x48057000,
+		.pa_end		= 0x480571ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_per -> gpio3 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio3 = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_gpio3_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_gpio3_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_gpio4_addrs[] = {
+	{
+		.pa_start	= 0x48059000,
+		.pa_end		= 0x480591ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_per -> gpio4 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio4 = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_gpio4_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_gpio4_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_gpio5_addrs[] = {
+	{
+		.pa_start	= 0x4805b000,
+		.pa_end		= 0x4805b1ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_per -> gpio5 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio5 = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_gpio5_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_gpio5_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_gpio6_addrs[] = {
+	{
+		.pa_start	= 0x4805d000,
+		.pa_end		= 0x4805d1ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_per -> gpio6 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio6 = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_gpio6_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_gpio6_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_gpmc_addrs[] = {
+	{
+		.pa_start	= 0x50000000,
+		.pa_end		= 0x500003ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l3_main_2 -> gpmc */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_2__gpmc = {
+	.master		= &omap44xx_l3_main_2_hwmod,
+	.slave		= &omap44xx_gpmc_hwmod,
+	.clk		= "l3_div_ck",
+	.addr		= omap44xx_gpmc_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_gpu_addrs[] = {
+	{
+		.pa_start	= 0x56000000,
+		.pa_end		= 0x5600ffff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l3_main_2 -> gpu */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_2__gpu = {
+	.master		= &omap44xx_l3_main_2_hwmod,
+	.slave		= &omap44xx_gpu_hwmod,
+	.clk		= "l3_div_ck",
+	.addr		= omap44xx_gpu_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_hdq1w_addrs[] = {
+	{
+		.pa_start	= 0x480b2000,
+		.pa_end		= 0x480b201f,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_per -> hdq1w */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__hdq1w = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_hdq1w_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_hdq1w_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_hsi_addrs[] = {
+	{
+		.pa_start	= 0x4a058000,
+		.pa_end		= 0x4a05bfff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_cfg -> hsi */
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__hsi = {
+	.master		= &omap44xx_l4_cfg_hwmod,
+	.slave		= &omap44xx_hsi_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_hsi_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_i2c1_addrs[] = {
+	{
+		.pa_start	= 0x48070000,
+		.pa_end		= 0x480700ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_per -> i2c1 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__i2c1 = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_i2c1_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_i2c1_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_i2c2_addrs[] = {
+	{
+		.pa_start	= 0x48072000,
+		.pa_end		= 0x480720ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_per -> i2c2 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__i2c2 = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_i2c2_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_i2c2_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_i2c3_addrs[] = {
+	{
+		.pa_start	= 0x48060000,
+		.pa_end		= 0x480600ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_per -> i2c3 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__i2c3 = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_i2c3_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_i2c3_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_i2c4_addrs[] = {
+	{
+		.pa_start	= 0x48350000,
+		.pa_end		= 0x483500ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_per -> i2c4 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__i2c4 = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_i2c4_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_i2c4_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_2 -> ipu */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_2__ipu = {
+	.master		= &omap44xx_l3_main_2_hwmod,
+	.slave		= &omap44xx_ipu_hwmod,
+	.clk		= "l3_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_iss_addrs[] = {
+	{
+		.pa_start	= 0x52000000,
+		.pa_end		= 0x520000ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l3_main_2 -> iss */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_2__iss = {
+	.master		= &omap44xx_l3_main_2_hwmod,
+	.slave		= &omap44xx_iss_hwmod,
+	.clk		= "l3_div_ck",
+	.addr		= omap44xx_iss_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* iva -> sl2if */
+static struct omap_hwmod_ocp_if omap44xx_iva__sl2if = {
+	.master		= &omap44xx_iva_hwmod,
+	.slave		= &omap44xx_sl2if_hwmod,
+	.clk		= "dpll_iva_m5x2_ck",
+	.user		= OCP_USER_IVA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_iva_addrs[] = {
+	{
+		.pa_start	= 0x5a000000,
+		.pa_end		= 0x5a07ffff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l3_main_2 -> iva */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_2__iva = {
+	.master		= &omap44xx_l3_main_2_hwmod,
+	.slave		= &omap44xx_iva_hwmod,
+	.clk		= "l3_div_ck",
+	.addr		= omap44xx_iva_addrs,
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space omap44xx_kbd_addrs[] = {
+	{
+		.pa_start	= 0x4a31c000,
+		.pa_end		= 0x4a31c07f,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_wkup -> kbd */
+static struct omap_hwmod_ocp_if omap44xx_l4_wkup__kbd = {
+	.master		= &omap44xx_l4_wkup_hwmod,
+	.slave		= &omap44xx_kbd_hwmod,
+	.clk		= "l4_wkup_clk_mux_ck",
+	.addr		= omap44xx_kbd_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_mailbox_addrs[] = {
+	{
+		.pa_start	= 0x4a0f4000,
+		.pa_end		= 0x4a0f41ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_cfg -> mailbox */
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__mailbox = {
+	.master		= &omap44xx_l4_cfg_hwmod,
+	.slave		= &omap44xx_mailbox_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_mailbox_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_mcasp_addrs[] = {
+	{
+		.pa_start	= 0x40128000,
+		.pa_end		= 0x401283ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_abe -> mcasp */
+static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcasp = {
+	.master		= &omap44xx_l4_abe_hwmod,
+	.slave		= &omap44xx_mcasp_hwmod,
+	.clk		= "ocp_abe_iclk",
+	.addr		= omap44xx_mcasp_addrs,
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space omap44xx_mcasp_dma_addrs[] = {
+	{
+		.pa_start	= 0x49028000,
+		.pa_end		= 0x490283ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_abe -> mcasp (dma) */
+static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcasp_dma = {
+	.master		= &omap44xx_l4_abe_hwmod,
+	.slave		= &omap44xx_mcasp_hwmod,
+	.clk		= "ocp_abe_iclk",
+	.addr		= omap44xx_mcasp_dma_addrs,
+	.user		= OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_mcbsp1_addrs[] = {
+	{
+		.name		= "mpu",
+		.pa_start	= 0x40122000,
+		.pa_end		= 0x401220ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_abe -> mcbsp1 */
+static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp1 = {
+	.master		= &omap44xx_l4_abe_hwmod,
+	.slave		= &omap44xx_mcbsp1_hwmod,
+	.clk		= "ocp_abe_iclk",
+	.addr		= omap44xx_mcbsp1_addrs,
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space omap44xx_mcbsp1_dma_addrs[] = {
+	{
+		.name		= "dma",
+		.pa_start	= 0x49022000,
+		.pa_end		= 0x490220ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_abe -> mcbsp1 (dma) */
+static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp1_dma = {
+	.master		= &omap44xx_l4_abe_hwmod,
+	.slave		= &omap44xx_mcbsp1_hwmod,
+	.clk		= "ocp_abe_iclk",
+	.addr		= omap44xx_mcbsp1_dma_addrs,
+	.user		= OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_mcbsp2_addrs[] = {
+	{
+		.name		= "mpu",
+		.pa_start	= 0x40124000,
+		.pa_end		= 0x401240ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_abe -> mcbsp2 */
+static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp2 = {
+	.master		= &omap44xx_l4_abe_hwmod,
+	.slave		= &omap44xx_mcbsp2_hwmod,
+	.clk		= "ocp_abe_iclk",
+	.addr		= omap44xx_mcbsp2_addrs,
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space omap44xx_mcbsp2_dma_addrs[] = {
+	{
+		.name		= "dma",
+		.pa_start	= 0x49024000,
+		.pa_end		= 0x490240ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_abe -> mcbsp2 (dma) */
+static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp2_dma = {
+	.master		= &omap44xx_l4_abe_hwmod,
+	.slave		= &omap44xx_mcbsp2_hwmod,
+	.clk		= "ocp_abe_iclk",
+	.addr		= omap44xx_mcbsp2_dma_addrs,
+	.user		= OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_mcbsp3_addrs[] = {
+	{
+		.name		= "mpu",
+		.pa_start	= 0x40126000,
+		.pa_end		= 0x401260ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_abe -> mcbsp3 */
+static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp3 = {
+	.master		= &omap44xx_l4_abe_hwmod,
+	.slave		= &omap44xx_mcbsp3_hwmod,
+	.clk		= "ocp_abe_iclk",
+	.addr		= omap44xx_mcbsp3_addrs,
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space omap44xx_mcbsp3_dma_addrs[] = {
+	{
+		.name		= "dma",
+		.pa_start	= 0x49026000,
+		.pa_end		= 0x490260ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_abe -> mcbsp3 (dma) */
+static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp3_dma = {
+	.master		= &omap44xx_l4_abe_hwmod,
+	.slave		= &omap44xx_mcbsp3_hwmod,
+	.clk		= "ocp_abe_iclk",
+	.addr		= omap44xx_mcbsp3_dma_addrs,
+	.user		= OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_mcbsp4_addrs[] = {
+	{
+		.pa_start	= 0x48096000,
+		.pa_end		= 0x480960ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_per -> mcbsp4 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__mcbsp4 = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_mcbsp4_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_mcbsp4_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_mcpdm_addrs[] = {
+	{
+		.pa_start	= 0x40132000,
+		.pa_end		= 0x4013207f,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_abe -> mcpdm */
+static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcpdm = {
+	.master		= &omap44xx_l4_abe_hwmod,
+	.slave		= &omap44xx_mcpdm_hwmod,
+	.clk		= "ocp_abe_iclk",
+	.addr		= omap44xx_mcpdm_addrs,
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space omap44xx_mcpdm_dma_addrs[] = {
+	{
+		.pa_start	= 0x49032000,
+		.pa_end		= 0x4903207f,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_abe -> mcpdm (dma) */
+static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcpdm_dma = {
+	.master		= &omap44xx_l4_abe_hwmod,
+	.slave		= &omap44xx_mcpdm_hwmod,
+	.clk		= "ocp_abe_iclk",
+	.addr		= omap44xx_mcpdm_dma_addrs,
+	.user		= OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_mcspi1_addrs[] = {
+	{
+		.pa_start	= 0x48098000,
+		.pa_end		= 0x480981ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_per -> mcspi1 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__mcspi1 = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_mcspi1_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_mcspi1_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_mcspi2_addrs[] = {
+	{
+		.pa_start	= 0x4809a000,
+		.pa_end		= 0x4809a1ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_per -> mcspi2 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__mcspi2 = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_mcspi2_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_mcspi2_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_mcspi3_addrs[] = {
+	{
+		.pa_start	= 0x480b8000,
+		.pa_end		= 0x480b81ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_per -> mcspi3 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__mcspi3 = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_mcspi3_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_mcspi3_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_mcspi4_addrs[] = {
+	{
+		.pa_start	= 0x480ba000,
+		.pa_end		= 0x480ba1ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_per -> mcspi4 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__mcspi4 = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_mcspi4_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_mcspi4_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_mmc1_addrs[] = {
+	{
+		.pa_start	= 0x4809c000,
+		.pa_end		= 0x4809c3ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_per -> mmc1 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__mmc1 = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_mmc1_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_mmc1_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_mmc2_addrs[] = {
+	{
+		.pa_start	= 0x480b4000,
+		.pa_end		= 0x480b43ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_per -> mmc2 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__mmc2 = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_mmc2_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_mmc2_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_mmc3_addrs[] = {
+	{
+		.pa_start	= 0x480ad000,
+		.pa_end		= 0x480ad3ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_per -> mmc3 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__mmc3 = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_mmc3_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_mmc3_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_mmc4_addrs[] = {
+	{
+		.pa_start	= 0x480d1000,
+		.pa_end		= 0x480d13ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_per -> mmc4 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__mmc4 = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_mmc4_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_mmc4_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_mmc5_addrs[] = {
+	{
+		.pa_start	= 0x480d5000,
+		.pa_end		= 0x480d53ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_per -> mmc5 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__mmc5 = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_mmc5_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_mmc5_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_2 -> ocmc_ram */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_2__ocmc_ram = {
+	.master		= &omap44xx_l3_main_2_hwmod,
+	.slave		= &omap44xx_ocmc_ram_hwmod,
+	.clk		= "l3_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_cfg -> ocp2scp_usb_phy */
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__ocp2scp_usb_phy = {
+	.master		= &omap44xx_l4_cfg_hwmod,
+	.slave		= &omap44xx_ocp2scp_usb_phy_hwmod,
+	.clk		= "l4_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_prcm_mpu_addrs[] = {
+	{
+		.pa_start	= 0x48243000,
+		.pa_end		= 0x48243fff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* mpu_private -> prcm_mpu */
+static struct omap_hwmod_ocp_if omap44xx_mpu_private__prcm_mpu = {
+	.master		= &omap44xx_mpu_private_hwmod,
+	.slave		= &omap44xx_prcm_mpu_hwmod,
+	.clk		= "l3_div_ck",
+	.addr		= omap44xx_prcm_mpu_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_cm_core_aon_addrs[] = {
+	{
+		.pa_start	= 0x4a004000,
+		.pa_end		= 0x4a004fff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_wkup -> cm_core_aon */
+static struct omap_hwmod_ocp_if omap44xx_l4_wkup__cm_core_aon = {
+	.master		= &omap44xx_l4_wkup_hwmod,
+	.slave		= &omap44xx_cm_core_aon_hwmod,
+	.clk		= "l4_wkup_clk_mux_ck",
+	.addr		= omap44xx_cm_core_aon_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_cm_core_addrs[] = {
+	{
+		.pa_start	= 0x4a008000,
+		.pa_end		= 0x4a009fff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_cfg -> cm_core */
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__cm_core = {
+	.master		= &omap44xx_l4_cfg_hwmod,
+	.slave		= &omap44xx_cm_core_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_cm_core_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_prm_addrs[] = {
+	{
+		.pa_start	= 0x4a306000,
+		.pa_end		= 0x4a307fff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_wkup -> prm */
+static struct omap_hwmod_ocp_if omap44xx_l4_wkup__prm = {
+	.master		= &omap44xx_l4_wkup_hwmod,
+	.slave		= &omap44xx_prm_hwmod,
+	.clk		= "l4_wkup_clk_mux_ck",
+	.addr		= omap44xx_prm_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_scrm_addrs[] = {
+	{
+		.pa_start	= 0x4a30a000,
+		.pa_end		= 0x4a30a7ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_wkup -> scrm */
+static struct omap_hwmod_ocp_if omap44xx_l4_wkup__scrm = {
+	.master		= &omap44xx_l4_wkup_hwmod,
+	.slave		= &omap44xx_scrm_hwmod,
+	.clk		= "l4_wkup_clk_mux_ck",
+	.addr		= omap44xx_scrm_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_2 -> sl2if */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_2__sl2if = {
+	.master		= &omap44xx_l3_main_2_hwmod,
+	.slave		= &omap44xx_sl2if_hwmod,
+	.clk		= "l3_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_slimbus1_addrs[] = {
+	{
+		.pa_start	= 0x4012c000,
+		.pa_end		= 0x4012c3ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_abe -> slimbus1 */
+static struct omap_hwmod_ocp_if omap44xx_l4_abe__slimbus1 = {
+	.master		= &omap44xx_l4_abe_hwmod,
+	.slave		= &omap44xx_slimbus1_hwmod,
+	.clk		= "ocp_abe_iclk",
+	.addr		= omap44xx_slimbus1_addrs,
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space omap44xx_slimbus1_dma_addrs[] = {
+	{
+		.pa_start	= 0x4902c000,
+		.pa_end		= 0x4902c3ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_abe -> slimbus1 (dma) */
+static struct omap_hwmod_ocp_if omap44xx_l4_abe__slimbus1_dma = {
+	.master		= &omap44xx_l4_abe_hwmod,
+	.slave		= &omap44xx_slimbus1_hwmod,
+	.clk		= "ocp_abe_iclk",
+	.addr		= omap44xx_slimbus1_dma_addrs,
+	.user		= OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_slimbus2_addrs[] = {
+	{
+		.pa_start	= 0x48076000,
+		.pa_end		= 0x480763ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_per -> slimbus2 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__slimbus2 = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_slimbus2_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_slimbus2_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_smartreflex_core_addrs[] = {
+	{
+		.pa_start	= 0x4a0dd000,
+		.pa_end		= 0x4a0dd03f,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_cfg -> smartreflex_core */
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__smartreflex_core = {
+	.master		= &omap44xx_l4_cfg_hwmod,
+	.slave		= &omap44xx_smartreflex_core_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_smartreflex_core_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_smartreflex_iva_addrs[] = {
+	{
+		.pa_start	= 0x4a0db000,
+		.pa_end		= 0x4a0db03f,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_cfg -> smartreflex_iva */
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__smartreflex_iva = {
+	.master		= &omap44xx_l4_cfg_hwmod,
+	.slave		= &omap44xx_smartreflex_iva_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_smartreflex_iva_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_smartreflex_mpu_addrs[] = {
+	{
+		.pa_start	= 0x4a0d9000,
+		.pa_end		= 0x4a0d903f,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_cfg -> smartreflex_mpu */
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__smartreflex_mpu = {
+	.master		= &omap44xx_l4_cfg_hwmod,
+	.slave		= &omap44xx_smartreflex_mpu_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_smartreflex_mpu_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_spinlock_addrs[] = {
+	{
+		.pa_start	= 0x4a0f6000,
+		.pa_end		= 0x4a0f6fff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_cfg -> spinlock */
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__spinlock = {
+	.master		= &omap44xx_l4_cfg_hwmod,
+	.slave		= &omap44xx_spinlock_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_spinlock_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_timer1_addrs[] = {
+	{
+		.pa_start	= 0x4a318000,
+		.pa_end		= 0x4a31807f,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_wkup -> timer1 */
+static struct omap_hwmod_ocp_if omap44xx_l4_wkup__timer1 = {
+	.master		= &omap44xx_l4_wkup_hwmod,
+	.slave		= &omap44xx_timer1_hwmod,
+	.clk		= "l4_wkup_clk_mux_ck",
+	.addr		= omap44xx_timer1_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_timer2_addrs[] = {
+	{
+		.pa_start	= 0x48032000,
+		.pa_end		= 0x4803207f,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_per -> timer2 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__timer2 = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_timer2_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_timer2_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_timer3_addrs[] = {
+	{
+		.pa_start	= 0x48034000,
+		.pa_end		= 0x4803407f,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_per -> timer3 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__timer3 = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_timer3_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_timer3_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_timer4_addrs[] = {
+	{
+		.pa_start	= 0x48036000,
+		.pa_end		= 0x4803607f,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_per -> timer4 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__timer4 = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_timer4_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_timer4_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_timer5_addrs[] = {
+	{
+		.pa_start	= 0x40138000,
+		.pa_end		= 0x4013807f,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_abe -> timer5 */
+static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer5 = {
+	.master		= &omap44xx_l4_abe_hwmod,
+	.slave		= &omap44xx_timer5_hwmod,
+	.clk		= "ocp_abe_iclk",
+	.addr		= omap44xx_timer5_addrs,
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space omap44xx_timer5_dma_addrs[] = {
+	{
+		.pa_start	= 0x49038000,
+		.pa_end		= 0x4903807f,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_abe -> timer5 (dma) */
+static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer5_dma = {
+	.master		= &omap44xx_l4_abe_hwmod,
+	.slave		= &omap44xx_timer5_hwmod,
+	.clk		= "ocp_abe_iclk",
+	.addr		= omap44xx_timer5_dma_addrs,
+	.user		= OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_timer6_addrs[] = {
+	{
+		.pa_start	= 0x4013a000,
+		.pa_end		= 0x4013a07f,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_abe -> timer6 */
+static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer6 = {
+	.master		= &omap44xx_l4_abe_hwmod,
+	.slave		= &omap44xx_timer6_hwmod,
+	.clk		= "ocp_abe_iclk",
+	.addr		= omap44xx_timer6_addrs,
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space omap44xx_timer6_dma_addrs[] = {
+	{
+		.pa_start	= 0x4903a000,
+		.pa_end		= 0x4903a07f,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_abe -> timer6 (dma) */
+static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer6_dma = {
+	.master		= &omap44xx_l4_abe_hwmod,
+	.slave		= &omap44xx_timer6_hwmod,
+	.clk		= "ocp_abe_iclk",
+	.addr		= omap44xx_timer6_dma_addrs,
+	.user		= OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_timer7_addrs[] = {
+	{
+		.pa_start	= 0x4013c000,
+		.pa_end		= 0x4013c07f,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_abe -> timer7 */
+static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer7 = {
+	.master		= &omap44xx_l4_abe_hwmod,
+	.slave		= &omap44xx_timer7_hwmod,
+	.clk		= "ocp_abe_iclk",
+	.addr		= omap44xx_timer7_addrs,
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space omap44xx_timer7_dma_addrs[] = {
+	{
+		.pa_start	= 0x4903c000,
+		.pa_end		= 0x4903c07f,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_abe -> timer7 (dma) */
+static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer7_dma = {
+	.master		= &omap44xx_l4_abe_hwmod,
+	.slave		= &omap44xx_timer7_hwmod,
+	.clk		= "ocp_abe_iclk",
+	.addr		= omap44xx_timer7_dma_addrs,
+	.user		= OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_timer8_addrs[] = {
+	{
+		.pa_start	= 0x4013e000,
+		.pa_end		= 0x4013e07f,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_abe -> timer8 */
+static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer8 = {
+	.master		= &omap44xx_l4_abe_hwmod,
+	.slave		= &omap44xx_timer8_hwmod,
+	.clk		= "ocp_abe_iclk",
+	.addr		= omap44xx_timer8_addrs,
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space omap44xx_timer8_dma_addrs[] = {
+	{
+		.pa_start	= 0x4903e000,
+		.pa_end		= 0x4903e07f,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_abe -> timer8 (dma) */
+static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer8_dma = {
+	.master		= &omap44xx_l4_abe_hwmod,
+	.slave		= &omap44xx_timer8_hwmod,
+	.clk		= "ocp_abe_iclk",
+	.addr		= omap44xx_timer8_dma_addrs,
+	.user		= OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_timer9_addrs[] = {
+	{
+		.pa_start	= 0x4803e000,
+		.pa_end		= 0x4803e07f,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_per -> timer9 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__timer9 = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_timer9_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_timer9_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_timer10_addrs[] = {
+	{
+		.pa_start	= 0x48086000,
+		.pa_end		= 0x4808607f,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_per -> timer10 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__timer10 = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_timer10_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_timer10_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_timer11_addrs[] = {
+	{
+		.pa_start	= 0x48088000,
+		.pa_end		= 0x4808807f,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_per -> timer11 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__timer11 = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_timer11_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_timer11_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_uart1_addrs[] = {
+	{
+		.pa_start	= 0x4806a000,
+		.pa_end		= 0x4806a0ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_per -> uart1 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__uart1 = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_uart1_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_uart1_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_uart2_addrs[] = {
+	{
+		.pa_start	= 0x4806c000,
+		.pa_end		= 0x4806c0ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_per -> uart2 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__uart2 = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_uart2_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_uart2_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_uart3_addrs[] = {
+	{
+		.pa_start	= 0x48020000,
+		.pa_end		= 0x480200ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_per -> uart3 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__uart3 = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_uart3_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_uart3_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_uart4_addrs[] = {
+	{
+		.pa_start	= 0x4806e000,
+		.pa_end		= 0x4806e0ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_per -> uart4 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__uart4 = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_uart4_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_uart4_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_usb_host_fs_addrs[] = {
+	{
+		.pa_start	= 0x4a0a9000,
+		.pa_end		= 0x4a0a93ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_cfg -> usb_host_fs */
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_host_fs = {
+	.master		= &omap44xx_l4_cfg_hwmod,
+	.slave		= &omap44xx_usb_host_fs_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_usb_host_fs_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
 static struct omap_hwmod_addr_space omap44xx_usb_host_hs_addrs[] = {
@@ -5345,12 +5881,7 @@ static struct omap_hwmod_addr_space omap44xx_usb_host_hs_addrs[] = {
 	{}
 };
 
-static struct omap_hwmod_irq_info omap44xx_usb_host_hs_irqs[] = {
-	{ .name = "ohci-irq", .irq = 76 + OMAP44XX_IRQ_GIC_START },
-	{ .name = "ehci-irq", .irq = 77 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
+/* l4_cfg -> usb_host_hs */
 static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_host_hs = {
 	.master		= &omap44xx_l4_cfg_hwmod,
 	.slave		= &omap44xx_usb_host_hs_hwmod,
@@ -5359,100 +5890,22 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_host_hs = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-static struct omap_hwmod_ocp_if *omap44xx_usb_host_hs_slaves[] = {
-	&omap44xx_l4_cfg__usb_host_hs,
-};
-
-static struct omap_hwmod omap44xx_usb_host_hs_hwmod = {
-	.name		= "usb_host_hs",
-	.class		= &omap44xx_usb_host_hs_hwmod_class,
-	.clkdm_name	= "l3_init_clkdm",
-	.main_clk	= "usb_host_hs_fck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L3INIT_USB_HOST_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L3INIT_USB_HOST_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
+static struct omap_hwmod_addr_space omap44xx_usb_otg_hs_addrs[] = {
+	{
+		.pa_start	= 0x4a0ab000,
+		.pa_end		= 0x4a0ab003,
+		.flags		= ADDR_TYPE_RT
 	},
-	.mpu_irqs	= omap44xx_usb_host_hs_irqs,
-	.slaves		= omap44xx_usb_host_hs_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_usb_host_hs_slaves),
-	.masters	= omap44xx_usb_host_hs_masters,
-	.masters_cnt	= ARRAY_SIZE(omap44xx_usb_host_hs_masters),
-
-	/*
-	 * Errata: USBHOST Configured In Smart-Idle Can Lead To a Deadlock
-	 * id: i660
-	 *
-	 * Description:
-	 * In the following configuration :
-	 * - USBHOST module is set to smart-idle mode
-	 * - PRCM asserts idle_req to the USBHOST module ( This typically
-	 *   happens when the system is going to a low power mode : all ports
-	 *   have been suspended, the master part of the USBHOST module has
-	 *   entered the standby state, and SW has cut the functional clocks)
-	 * - an USBHOST interrupt occurs before the module is able to answer
-	 *   idle_ack, typically a remote wakeup IRQ.
-	 * Then the USB HOST module will enter a deadlock situation where it
-	 * is no more accessible nor functional.
-	 *
-	 * Workaround:
-	 * Don't use smart idle; use only force idle, hence HWMOD_SWSUP_SIDLE
-	 */
-
-	/*
-	 * Errata: USB host EHCI may stall when entering smart-standby mode
-	 * Id: i571
-	 *
-	 * Description:
-	 * When the USBHOST module is set to smart-standby mode, and when it is
-	 * ready to enter the standby state (i.e. all ports are suspended and
-	 * all attached devices are in suspend mode), then it can wrongly assert
-	 * the Mstandby signal too early while there are still some residual OCP
-	 * transactions ongoing. If this condition occurs, the internal state
-	 * machine may go to an undefined state and the USB link may be stuck
-	 * upon the next resume.
-	 *
-	 * Workaround:
-	 * Don't use smart standby; use only force standby,
-	 * hence HWMOD_SWSUP_MSTANDBY
-	 */
-
-	/*
-	 * During system boot; If the hwmod framework resets the module
-	 * the module will have smart idle settings; which can lead to deadlock
-	 * (above Errata Id:i660); so, dont reset the module during boot;
-	 * Use HWMOD_INIT_NO_RESET.
-	 */
-
-	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY |
-			  HWMOD_INIT_NO_RESET,
-};
-
-/*
- * 'usb_tll_hs' class
- * usb_tll_hs module is the adapter on the usb_host_hs ports
- */
-static struct omap_hwmod_class_sysconfig omap44xx_usb_tll_hs_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
-			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
-			   SYSC_HAS_AUTOIDLE),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap44xx_usb_tll_hs_hwmod_class = {
-	.name = "usb_tll_hs",
-	.sysc = &omap44xx_usb_tll_hs_sysc,
+	{ }
 };
 
-static struct omap_hwmod_irq_info omap44xx_usb_tll_hs_irqs[] = {
-	{ .name = "tll-irq", .irq = 78 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
+/* l4_cfg -> usb_otg_hs */
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_otg_hs = {
+	.master		= &omap44xx_l4_cfg_hwmod,
+	.slave		= &omap44xx_usb_otg_hs_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_usb_otg_hs_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
 static struct omap_hwmod_addr_space omap44xx_usb_tll_hs_addrs[] = {
@@ -5465,6 +5918,7 @@ static struct omap_hwmod_addr_space omap44xx_usb_tll_hs_addrs[] = {
 	{}
 };
 
+/* l4_cfg -> usb_tll_hs */
 static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_tll_hs = {
 	.master		= &omap44xx_l4_cfg_hwmod,
 	.slave		= &omap44xx_usb_tll_hs_hwmod,
@@ -5473,181 +5927,223 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_tll_hs = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-static struct omap_hwmod_ocp_if *omap44xx_usb_tll_hs_slaves[] = {
-	&omap44xx_l4_cfg__usb_tll_hs,
+static struct omap_hwmod_addr_space omap44xx_wd_timer2_addrs[] = {
+	{
+		.pa_start	= 0x4a314000,
+		.pa_end		= 0x4a31407f,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
 };
 
-static struct omap_hwmod omap44xx_usb_tll_hs_hwmod = {
-	.name		= "usb_tll_hs",
-	.class		= &omap44xx_usb_tll_hs_hwmod_class,
-	.clkdm_name	= "l3_init_clkdm",
-	.main_clk	= "usb_tll_hs_ick",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L3INIT_USB_TLL_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L3INIT_USB_TLL_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
+/* l4_wkup -> wd_timer2 */
+static struct omap_hwmod_ocp_if omap44xx_l4_wkup__wd_timer2 = {
+	.master		= &omap44xx_l4_wkup_hwmod,
+	.slave		= &omap44xx_wd_timer2_hwmod,
+	.clk		= "l4_wkup_clk_mux_ck",
+	.addr		= omap44xx_wd_timer2_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_wd_timer3_addrs[] = {
+	{
+		.pa_start	= 0x40130000,
+		.pa_end		= 0x4013007f,
+		.flags		= ADDR_TYPE_RT
 	},
-	.mpu_irqs	= omap44xx_usb_tll_hs_irqs,
-	.slaves		= omap44xx_usb_tll_hs_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_usb_tll_hs_slaves),
+	{ }
 };
 
-static __initdata struct omap_hwmod *omap44xx_hwmods[] = {
-
-	/* dmm class */
-	&omap44xx_dmm_hwmod,
-
-	/* emif_fw class */
-	&omap44xx_emif_fw_hwmod,
-
-	/* l3 class */
-	&omap44xx_l3_instr_hwmod,
-	&omap44xx_l3_main_1_hwmod,
-	&omap44xx_l3_main_2_hwmod,
-	&omap44xx_l3_main_3_hwmod,
-
-	/* l4 class */
-	&omap44xx_l4_abe_hwmod,
-	&omap44xx_l4_cfg_hwmod,
-	&omap44xx_l4_per_hwmod,
-	&omap44xx_l4_wkup_hwmod,
-
-	/* mpu_bus class */
-	&omap44xx_mpu_private_hwmod,
-
-	/* aess class */
-/*	&omap44xx_aess_hwmod, */
-
-	/* bandgap class */
-	&omap44xx_bandgap_hwmod,
-
-	/* counter class */
-/*	&omap44xx_counter_32k_hwmod, */
-
-	/* dma class */
-	&omap44xx_dma_system_hwmod,
-
-	/* dmic class */
-	&omap44xx_dmic_hwmod,
-
-	/* dsp class */
-	&omap44xx_dsp_hwmod,
-	&omap44xx_dsp_c0_hwmod,
-
-	/* dss class */
-	&omap44xx_dss_hwmod,
-	&omap44xx_dss_dispc_hwmod,
-	&omap44xx_dss_dsi1_hwmod,
-	&omap44xx_dss_dsi2_hwmod,
-	&omap44xx_dss_hdmi_hwmod,
-	&omap44xx_dss_rfbi_hwmod,
-	&omap44xx_dss_venc_hwmod,
-
-	/* gpio class */
-	&omap44xx_gpio1_hwmod,
-	&omap44xx_gpio2_hwmod,
-	&omap44xx_gpio3_hwmod,
-	&omap44xx_gpio4_hwmod,
-	&omap44xx_gpio5_hwmod,
-	&omap44xx_gpio6_hwmod,
-
-	/* hsi class */
-/*	&omap44xx_hsi_hwmod, */
-
-	/* i2c class */
-	&omap44xx_i2c1_hwmod,
-	&omap44xx_i2c2_hwmod,
-	&omap44xx_i2c3_hwmod,
-	&omap44xx_i2c4_hwmod,
-
-	/* ipu class */
-	&omap44xx_ipu_hwmod,
-	&omap44xx_ipu_c0_hwmod,
-	&omap44xx_ipu_c1_hwmod,
-
-	/* iss class */
-/*	&omap44xx_iss_hwmod, */
-
-	/* iva class */
-	&omap44xx_iva_hwmod,
-	&omap44xx_iva_seq0_hwmod,
-	&omap44xx_iva_seq1_hwmod,
-
-	/* kbd class */
-	&omap44xx_kbd_hwmod,
-
-	/* mailbox class */
-	&omap44xx_mailbox_hwmod,
-
-	/* mcbsp class */
-	&omap44xx_mcbsp1_hwmod,
-	&omap44xx_mcbsp2_hwmod,
-	&omap44xx_mcbsp3_hwmod,
-	&omap44xx_mcbsp4_hwmod,
-
-	/* mcpdm class */
-	&omap44xx_mcpdm_hwmod,
-
-	/* mcspi class */
-	&omap44xx_mcspi1_hwmod,
-	&omap44xx_mcspi2_hwmod,
-	&omap44xx_mcspi3_hwmod,
-	&omap44xx_mcspi4_hwmod,
-
-	/* mmc class */
-	&omap44xx_mmc1_hwmod,
-	&omap44xx_mmc2_hwmod,
-	&omap44xx_mmc3_hwmod,
-	&omap44xx_mmc4_hwmod,
-	&omap44xx_mmc5_hwmod,
-
-	/* mpu class */
-	&omap44xx_mpu_hwmod,
-
-	/* smartreflex class */
-	&omap44xx_smartreflex_core_hwmod,
-	&omap44xx_smartreflex_iva_hwmod,
-	&omap44xx_smartreflex_mpu_hwmod,
-
-	/* spinlock class */
-	&omap44xx_spinlock_hwmod,
-
-	/* timer class */
-	&omap44xx_timer1_hwmod,
-	&omap44xx_timer2_hwmod,
-	&omap44xx_timer3_hwmod,
-	&omap44xx_timer4_hwmod,
-	&omap44xx_timer5_hwmod,
-	&omap44xx_timer6_hwmod,
-	&omap44xx_timer7_hwmod,
-	&omap44xx_timer8_hwmod,
-	&omap44xx_timer9_hwmod,
-	&omap44xx_timer10_hwmod,
-	&omap44xx_timer11_hwmod,
-
-	/* uart class */
-	&omap44xx_uart1_hwmod,
-	&omap44xx_uart2_hwmod,
-	&omap44xx_uart3_hwmod,
-	&omap44xx_uart4_hwmod,
-
-	/* usb host class */
-	&omap44xx_usb_host_hs_hwmod,
-	&omap44xx_usb_tll_hs_hwmod,
-
-	/* usb_otg_hs class */
-	&omap44xx_usb_otg_hs_hwmod,
-
-	/* wd_timer class */
-	&omap44xx_wd_timer2_hwmod,
-	&omap44xx_wd_timer3_hwmod,
+/* l4_abe -> wd_timer3 */
+static struct omap_hwmod_ocp_if omap44xx_l4_abe__wd_timer3 = {
+	.master		= &omap44xx_l4_abe_hwmod,
+	.slave		= &omap44xx_wd_timer3_hwmod,
+	.clk		= "ocp_abe_iclk",
+	.addr		= omap44xx_wd_timer3_addrs,
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space omap44xx_wd_timer3_dma_addrs[] = {
+	{
+		.pa_start	= 0x49030000,
+		.pa_end		= 0x4903007f,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_abe -> wd_timer3 (dma) */
+static struct omap_hwmod_ocp_if omap44xx_l4_abe__wd_timer3_dma = {
+	.master		= &omap44xx_l4_abe_hwmod,
+	.slave		= &omap44xx_wd_timer3_hwmod,
+	.clk		= "ocp_abe_iclk",
+	.addr		= omap44xx_wd_timer3_dma_addrs,
+	.user		= OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
+	&omap44xx_c2c__c2c_target_fw,
+	&omap44xx_l4_cfg__c2c_target_fw,
+	&omap44xx_l3_main_1__dmm,
+	&omap44xx_mpu__dmm,
+	&omap44xx_c2c__emif_fw,
+	&omap44xx_dmm__emif_fw,
+	&omap44xx_l4_cfg__emif_fw,
+	&omap44xx_iva__l3_instr,
+	&omap44xx_l3_main_3__l3_instr,
+	&omap44xx_ocp_wp_noc__l3_instr,
+	&omap44xx_dsp__l3_main_1,
+	&omap44xx_dss__l3_main_1,
+	&omap44xx_l3_main_2__l3_main_1,
+	&omap44xx_l4_cfg__l3_main_1,
+	&omap44xx_mmc1__l3_main_1,
+	&omap44xx_mmc2__l3_main_1,
+	&omap44xx_mpu__l3_main_1,
+	&omap44xx_c2c_target_fw__l3_main_2,
+	&omap44xx_debugss__l3_main_2,
+	&omap44xx_dma_system__l3_main_2,
+	&omap44xx_fdif__l3_main_2,
+	&omap44xx_gpu__l3_main_2,
+	&omap44xx_hsi__l3_main_2,
+	&omap44xx_ipu__l3_main_2,
+	&omap44xx_iss__l3_main_2,
+	&omap44xx_iva__l3_main_2,
+	&omap44xx_l3_main_1__l3_main_2,
+	&omap44xx_l4_cfg__l3_main_2,
+	&omap44xx_usb_host_fs__l3_main_2,
+	&omap44xx_usb_host_hs__l3_main_2,
+	&omap44xx_usb_otg_hs__l3_main_2,
+	&omap44xx_l3_main_1__l3_main_3,
+	&omap44xx_l3_main_2__l3_main_3,
+	&omap44xx_l4_cfg__l3_main_3,
+	&omap44xx_aess__l4_abe,
+	&omap44xx_dsp__l4_abe,
+	&omap44xx_l3_main_1__l4_abe,
+	&omap44xx_mpu__l4_abe,
+	&omap44xx_l3_main_1__l4_cfg,
+	&omap44xx_l3_main_2__l4_per,
+	&omap44xx_l4_cfg__l4_wkup,
+	&omap44xx_mpu__mpu_private,
+	&omap44xx_l4_cfg__ocp_wp_noc,
+	&omap44xx_l4_abe__aess,
+	&omap44xx_l4_abe__aess_dma,
+	&omap44xx_l3_main_2__c2c,
+	&omap44xx_l4_wkup__counter_32k,
+	&omap44xx_l4_cfg__ctrl_module_core,
+	&omap44xx_l4_cfg__ctrl_module_pad_core,
+	&omap44xx_l4_wkup__ctrl_module_wkup,
+	&omap44xx_l4_wkup__ctrl_module_pad_wkup,
+	&omap44xx_l3_instr__debugss,
+	&omap44xx_l4_cfg__dma_system,
+	&omap44xx_l4_abe__dmic,
+	&omap44xx_l4_abe__dmic_dma,
+	&omap44xx_dsp__iva,
+	&omap44xx_dsp__sl2if,
+	&omap44xx_l4_cfg__dsp,
+	&omap44xx_l3_main_2__dss,
+	&omap44xx_l4_per__dss,
+	&omap44xx_l3_main_2__dss_dispc,
+	&omap44xx_l4_per__dss_dispc,
+	&omap44xx_l3_main_2__dss_dsi1,
+	&omap44xx_l4_per__dss_dsi1,
+	&omap44xx_l3_main_2__dss_dsi2,
+	&omap44xx_l4_per__dss_dsi2,
+	&omap44xx_l3_main_2__dss_hdmi,
+	&omap44xx_l4_per__dss_hdmi,
+	&omap44xx_l3_main_2__dss_rfbi,
+	&omap44xx_l4_per__dss_rfbi,
+	&omap44xx_l3_main_2__dss_venc,
+	&omap44xx_l4_per__dss_venc,
+	&omap44xx_l4_per__elm,
+	&omap44xx_emif_fw__emif1,
+	&omap44xx_emif_fw__emif2,
+	&omap44xx_l4_cfg__fdif,
+	&omap44xx_l4_wkup__gpio1,
+	&omap44xx_l4_per__gpio2,
+	&omap44xx_l4_per__gpio3,
+	&omap44xx_l4_per__gpio4,
+	&omap44xx_l4_per__gpio5,
+	&omap44xx_l4_per__gpio6,
+	&omap44xx_l3_main_2__gpmc,
+	&omap44xx_l3_main_2__gpu,
+	&omap44xx_l4_per__hdq1w,
+	&omap44xx_l4_cfg__hsi,
+	&omap44xx_l4_per__i2c1,
+	&omap44xx_l4_per__i2c2,
+	&omap44xx_l4_per__i2c3,
+	&omap44xx_l4_per__i2c4,
+	&omap44xx_l3_main_2__ipu,
+	&omap44xx_l3_main_2__iss,
+	&omap44xx_iva__sl2if,
+	&omap44xx_l3_main_2__iva,
+	&omap44xx_l4_wkup__kbd,
+	&omap44xx_l4_cfg__mailbox,
+	&omap44xx_l4_abe__mcasp,
+	&omap44xx_l4_abe__mcasp_dma,
+	&omap44xx_l4_abe__mcbsp1,
+	&omap44xx_l4_abe__mcbsp1_dma,
+	&omap44xx_l4_abe__mcbsp2,
+	&omap44xx_l4_abe__mcbsp2_dma,
+	&omap44xx_l4_abe__mcbsp3,
+	&omap44xx_l4_abe__mcbsp3_dma,
+	&omap44xx_l4_per__mcbsp4,
+	&omap44xx_l4_abe__mcpdm,
+	&omap44xx_l4_abe__mcpdm_dma,
+	&omap44xx_l4_per__mcspi1,
+	&omap44xx_l4_per__mcspi2,
+	&omap44xx_l4_per__mcspi3,
+	&omap44xx_l4_per__mcspi4,
+	&omap44xx_l4_per__mmc1,
+	&omap44xx_l4_per__mmc2,
+	&omap44xx_l4_per__mmc3,
+	&omap44xx_l4_per__mmc4,
+	&omap44xx_l4_per__mmc5,
+	&omap44xx_l3_main_2__ocmc_ram,
+	&omap44xx_l4_cfg__ocp2scp_usb_phy,
+	&omap44xx_mpu_private__prcm_mpu,
+	&omap44xx_l4_wkup__cm_core_aon,
+	&omap44xx_l4_cfg__cm_core,
+	&omap44xx_l4_wkup__prm,
+	&omap44xx_l4_wkup__scrm,
+	&omap44xx_l3_main_2__sl2if,
+	&omap44xx_l4_abe__slimbus1,
+	&omap44xx_l4_abe__slimbus1_dma,
+	&omap44xx_l4_per__slimbus2,
+	&omap44xx_l4_cfg__smartreflex_core,
+	&omap44xx_l4_cfg__smartreflex_iva,
+	&omap44xx_l4_cfg__smartreflex_mpu,
+	&omap44xx_l4_cfg__spinlock,
+	&omap44xx_l4_wkup__timer1,
+	&omap44xx_l4_per__timer2,
+	&omap44xx_l4_per__timer3,
+	&omap44xx_l4_per__timer4,
+	&omap44xx_l4_abe__timer5,
+	&omap44xx_l4_abe__timer5_dma,
+	&omap44xx_l4_abe__timer6,
+	&omap44xx_l4_abe__timer6_dma,
+	&omap44xx_l4_abe__timer7,
+	&omap44xx_l4_abe__timer7_dma,
+	&omap44xx_l4_abe__timer8,
+	&omap44xx_l4_abe__timer8_dma,
+	&omap44xx_l4_per__timer9,
+	&omap44xx_l4_per__timer10,
+	&omap44xx_l4_per__timer11,
+	&omap44xx_l4_per__uart1,
+	&omap44xx_l4_per__uart2,
+	&omap44xx_l4_per__uart3,
+	&omap44xx_l4_per__uart4,
+	&omap44xx_l4_cfg__usb_host_fs,
+	&omap44xx_l4_cfg__usb_host_hs,
+	&omap44xx_l4_cfg__usb_otg_hs,
+	&omap44xx_l4_cfg__usb_tll_hs,
+	&omap44xx_l4_wkup__wd_timer2,
+	&omap44xx_l4_abe__wd_timer3,
+	&omap44xx_l4_abe__wd_timer3_dma,
 	NULL,
 };
 
 int __init omap44xx_hwmod_init(void)
 {
-	return omap_hwmod_register(omap44xx_hwmods);
+	return omap_hwmod_register_links(omap44xx_hwmod_ocp_ifs);
 }
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.h b/arch/arm/mach-omap2/omap_hwmod_common_data.h
index ad5d8f04c0b8..e7e8eeae95e5 100644
--- a/arch/arm/mach-omap2/omap_hwmod_common_data.h
+++ b/arch/arm/mach-omap2/omap_hwmod_common_data.h
@@ -19,18 +19,6 @@
 #include "display.h"
 
 /* Common address space across OMAP2xxx */
-extern struct omap_hwmod_addr_space omap2xxx_uart1_addr_space[];
-extern struct omap_hwmod_addr_space omap2xxx_uart2_addr_space[];
-extern struct omap_hwmod_addr_space omap2xxx_uart3_addr_space[];
-extern struct omap_hwmod_addr_space omap2xxx_timer2_addrs[];
-extern struct omap_hwmod_addr_space omap2xxx_timer3_addrs[];
-extern struct omap_hwmod_addr_space omap2xxx_timer4_addrs[];
-extern struct omap_hwmod_addr_space omap2xxx_timer5_addrs[];
-extern struct omap_hwmod_addr_space omap2xxx_timer6_addrs[];
-extern struct omap_hwmod_addr_space omap2xxx_timer7_addrs[];
-extern struct omap_hwmod_addr_space omap2xxx_timer8_addrs[];
-extern struct omap_hwmod_addr_space omap2xxx_timer9_addrs[];
-extern struct omap_hwmod_addr_space omap2xxx_timer12_addrs[];
 extern struct omap_hwmod_addr_space omap2xxx_mcbsp2_addrs[];
 
 /* Common address space across OMAP2xxx/3xxx */
@@ -50,10 +38,70 @@ extern struct omap_hwmod_addr_space omap2430_mcspi3_addr_space[];
 extern struct omap_hwmod_addr_space omap2_dma_system_addrs[];
 extern struct omap_hwmod_addr_space omap2_mailbox_addrs[];
 extern struct omap_hwmod_addr_space omap2_mcbsp1_addrs[];
+extern struct omap_hwmod_addr_space omap2_hdq1w_addr_space[];
 
 /* Common IP block data across OMAP2xxx */
 extern struct omap_hwmod_irq_info omap2xxx_timer12_mpu_irqs[];
 extern struct omap_hwmod_dma_info omap2xxx_dss_sdma_chs[];
+extern struct omap_gpio_dev_attr omap2xxx_gpio_dev_attr;
+extern struct omap_hwmod omap2xxx_l3_main_hwmod;
+extern struct omap_hwmod omap2xxx_l4_core_hwmod;
+extern struct omap_hwmod omap2xxx_l4_wkup_hwmod;
+extern struct omap_hwmod omap2xxx_mpu_hwmod;
+extern struct omap_hwmod omap2xxx_iva_hwmod;
+extern struct omap_hwmod omap2xxx_timer1_hwmod;
+extern struct omap_hwmod omap2xxx_timer2_hwmod;
+extern struct omap_hwmod omap2xxx_timer3_hwmod;
+extern struct omap_hwmod omap2xxx_timer4_hwmod;
+extern struct omap_hwmod omap2xxx_timer5_hwmod;
+extern struct omap_hwmod omap2xxx_timer6_hwmod;
+extern struct omap_hwmod omap2xxx_timer7_hwmod;
+extern struct omap_hwmod omap2xxx_timer8_hwmod;
+extern struct omap_hwmod omap2xxx_timer9_hwmod;
+extern struct omap_hwmod omap2xxx_timer10_hwmod;
+extern struct omap_hwmod omap2xxx_timer11_hwmod;
+extern struct omap_hwmod omap2xxx_timer12_hwmod;
+extern struct omap_hwmod omap2xxx_wd_timer2_hwmod;
+extern struct omap_hwmod omap2xxx_uart1_hwmod;
+extern struct omap_hwmod omap2xxx_uart2_hwmod;
+extern struct omap_hwmod omap2xxx_uart3_hwmod;
+extern struct omap_hwmod omap2xxx_dss_core_hwmod;
+extern struct omap_hwmod omap2xxx_dss_dispc_hwmod;
+extern struct omap_hwmod omap2xxx_dss_rfbi_hwmod;
+extern struct omap_hwmod omap2xxx_dss_venc_hwmod;
+extern struct omap_hwmod omap2xxx_gpio1_hwmod;
+extern struct omap_hwmod omap2xxx_gpio2_hwmod;
+extern struct omap_hwmod omap2xxx_gpio3_hwmod;
+extern struct omap_hwmod omap2xxx_gpio4_hwmod;
+extern struct omap_hwmod omap2xxx_mcspi1_hwmod;
+extern struct omap_hwmod omap2xxx_mcspi2_hwmod;
+extern struct omap_hwmod omap2xxx_counter_32k_hwmod;
+
+/* Common interface data across OMAP2xxx */
+extern struct omap_hwmod_ocp_if omap2xxx_l3_main__l4_core;
+extern struct omap_hwmod_ocp_if omap2xxx_mpu__l3_main;
+extern struct omap_hwmod_ocp_if omap2xxx_dss__l3;
+extern struct omap_hwmod_ocp_if omap2xxx_l4_core__l4_wkup;
+extern struct omap_hwmod_ocp_if omap2_l4_core__uart1;
+extern struct omap_hwmod_ocp_if omap2_l4_core__uart2;
+extern struct omap_hwmod_ocp_if omap2_l4_core__uart3;
+extern struct omap_hwmod_ocp_if omap2xxx_l4_core__mcspi1;
+extern struct omap_hwmod_ocp_if omap2xxx_l4_core__mcspi2;
+extern struct omap_hwmod_ocp_if omap2xxx_l4_core__timer2;
+extern struct omap_hwmod_ocp_if omap2xxx_l4_core__timer3;
+extern struct omap_hwmod_ocp_if omap2xxx_l4_core__timer4;
+extern struct omap_hwmod_ocp_if omap2xxx_l4_core__timer5;
+extern struct omap_hwmod_ocp_if omap2xxx_l4_core__timer6;
+extern struct omap_hwmod_ocp_if omap2xxx_l4_core__timer7;
+extern struct omap_hwmod_ocp_if omap2xxx_l4_core__timer8;
+extern struct omap_hwmod_ocp_if omap2xxx_l4_core__timer9;
+extern struct omap_hwmod_ocp_if omap2xxx_l4_core__timer10;
+extern struct omap_hwmod_ocp_if omap2xxx_l4_core__timer11;
+extern struct omap_hwmod_ocp_if omap2xxx_l4_core__timer12;
+extern struct omap_hwmod_ocp_if omap2xxx_l4_core__dss;
+extern struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_dispc;
+extern struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_rfbi;
+extern struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_venc;
 
 /* Common IP block data */
 extern struct omap_hwmod_dma_info omap2_uart1_sdma_reqs[];
@@ -94,6 +142,8 @@ extern struct omap_hwmod_irq_info omap2_gpio4_irqs[];
 extern struct omap_hwmod_irq_info omap2_dma_system_irqs[];
 extern struct omap_hwmod_irq_info omap2_mcspi1_mpu_irqs[];
 extern struct omap_hwmod_irq_info omap2_mcspi2_mpu_irqs[];
+extern struct omap_hwmod_addr_space omap2xxx_timer12_addrs[];
+extern struct omap_hwmod_irq_info omap2_hdq1w_mpu_irqs[];
 
 /* OMAP hwmod classes - forward declarations */
 extern struct omap_hwmod_class l3_hwmod_class;
@@ -105,6 +155,8 @@ extern struct omap_hwmod_class omap2_dss_hwmod_class;
 extern struct omap_hwmod_class omap2_dispc_hwmod_class;
 extern struct omap_hwmod_class omap2_rfbi_hwmod_class;
 extern struct omap_hwmod_class omap2_venc_hwmod_class;
+extern struct omap_hwmod_class_sysconfig omap2_hdq1w_sysc;
+extern struct omap_hwmod_class omap2_hdq1w_class;
 
 extern struct omap_hwmod_class omap2xxx_timer_hwmod_class;
 extern struct omap_hwmod_class omap2xxx_wd_timer_hwmod_class;
diff --git a/arch/arm/mach-omap2/opp.c b/arch/arm/mach-omap2/opp.c
index 9262a6b47702..de6d46451746 100644
--- a/arch/arm/mach-omap2/opp.c
+++ b/arch/arm/mach-omap2/opp.c
@@ -64,10 +64,10 @@ int __init omap_init_opp_table(struct omap_opp_def *opp_def,
 		}
 		oh = omap_hwmod_lookup(opp_def->hwmod_name);
 		if (!oh || !oh->od) {
-			pr_warn("%s: no hwmod or odev for %s, [%d] "
+			pr_debug("%s: no hwmod or odev for %s, [%d] "
 				"cannot add OPPs.\n", __func__,
 				opp_def->hwmod_name, i);
-			return -EINVAL;
+			continue;
 		}
 		dev = &oh->od->pdev->dev;
 
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index d0c1c9695996..9cb5cede0f50 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -295,7 +295,7 @@ static int __init omap2_common_pm_init(void)
 }
 postcore_initcall(omap2_common_pm_init);
 
-static int __init omap2_common_pm_late_init(void)
+int __init omap2_common_pm_late_init(void)
 {
 	/*
 	 * In the case of DT, the PMIC and SR initialization will be done using
@@ -322,4 +322,3 @@ static int __init omap2_common_pm_late_init(void)
 
 	return 0;
 }
-late_initcall(omap2_common_pm_late_init);
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index 36fa90b6ece8..78564895e914 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -38,27 +38,6 @@ static inline int omap4_opp_init(void)
 }
 #endif
 
-/*
- * cpuidle mach specific parameters
- *
- * The board code can override the default C-states definition using
- * omap3_pm_init_cpuidle
- */
-struct cpuidle_params {
-	u32 exit_latency;	/* exit_latency = sleep + wake-up latencies */
-	u32 target_residency;
-	u8 valid;		/* validates the C-state */
-};
-
-#if defined(CONFIG_PM) && defined(CONFIG_CPU_IDLE)
-extern void omap3_pm_init_cpuidle(struct cpuidle_params *cpuidle_board_params);
-#else
-static
-inline void omap3_pm_init_cpuidle(struct cpuidle_params *cpuidle_board_params)
-{
-}
-#endif
-
 extern int omap3_pm_get_suspend_state(struct powerdomain *pwrdm);
 extern int omap3_pm_set_suspend_state(struct powerdomain *pwrdm, int state);
 
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index 95442b69ae27..2edeffc923a6 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -171,8 +171,6 @@ static int omap2_allow_mpu_retention(void)
 
 static void omap2_enter_mpu_retention(void)
 {
-	int only_idle = 0;
-
 	/* Putting MPU into the WFI state while a transfer is active
 	 * seems to cause the I2C block to timeout. Why? Good question. */
 	if (omap2_i2c_active())
@@ -195,7 +193,6 @@ static void omap2_enter_mpu_retention(void)
 
 		omap2_prm_write_mod_reg(OMAP_LOGICRETSTATE_MASK, MPU_MOD,
 						 OMAP2_PM_PWSTCTRL);
-		only_idle = 1;
 	}
 
 	omap2_sram_idle();
@@ -301,13 +298,10 @@ static void __init prcm_setup_regs(void)
 				WKUP_MOD, PM_WKEN);
 }
 
-static int __init omap2_pm_init(void)
+int __init omap2_pm_init(void)
 {
 	u32 l;
 
-	if (!cpu_is_omap24xx())
-		return -ENODEV;
-
 	printk(KERN_INFO "Power Management for OMAP2 initializing\n");
 	l = omap2_prm_read_mod_reg(OCP_MOD, OMAP2_PRCM_REVISION_OFFSET);
 	printk(KERN_INFO "PRCM revision %d.%d\n", (l >> 4) & 0x0f, l & 0x0f);
@@ -373,17 +367,13 @@ static int __init omap2_pm_init(void)
 	 * These routines need to be in SRAM as that's the only
 	 * memory the MPU can see when it wakes up.
 	 */
-	if (cpu_is_omap24xx()) {
-		omap2_sram_idle = omap_sram_push(omap24xx_idle_loop_suspend,
-						 omap24xx_idle_loop_suspend_sz);
+	omap2_sram_idle = omap_sram_push(omap24xx_idle_loop_suspend,
+					 omap24xx_idle_loop_suspend_sz);
 
-		omap2_sram_suspend = omap_sram_push(omap24xx_cpu_suspend,
-						    omap24xx_cpu_suspend_sz);
-	}
+	omap2_sram_suspend = omap_sram_push(omap24xx_cpu_suspend,
+					    omap24xx_cpu_suspend_sz);
 
 	arm_pm_idle = omap2_pm_idle;
 
 	return 0;
 }
-
-late_initcall(omap2_pm_init);
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 238defc6f6df..a34023d0ca7c 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -153,8 +153,7 @@ static void omap3_save_secure_ram_context(void)
 		pwrdm_set_next_pwrst(mpu_pwrdm, mpu_next_state);
 		/* Following is for error tracking, it should not happen */
 		if (ret) {
-			printk(KERN_ERR "save_secure_sram() returns %08x\n",
-				ret);
+			pr_err("save_secure_sram() returns %08x\n", ret);
 			while (1)
 				;
 		}
@@ -274,7 +273,7 @@ void omap_sram_idle(void)
 	int per_next_state = PWRDM_POWER_ON;
 	int core_next_state = PWRDM_POWER_ON;
 	int per_going_off;
-	int core_prev_state, per_prev_state;
+	int core_prev_state;
 	u32 sdrc_pwr = 0;
 
 	mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm);
@@ -289,7 +288,7 @@ void omap_sram_idle(void)
 		break;
 	default:
 		/* Invalid state */
-		printk(KERN_ERR "Invalid mpu state in sram_idle\n");
+		pr_err("Invalid mpu state in sram_idle\n");
 		return;
 	}
 
@@ -376,10 +375,8 @@ void omap_sram_idle(void)
 	pwrdm_post_transition();
 
 	/* PER */
-	if (per_next_state < PWRDM_POWER_ON) {
-		per_prev_state = pwrdm_read_prev_pwrst(per_pwrdm);
+	if (per_next_state < PWRDM_POWER_ON)
 		omap2_gpio_resume_after_idle();
-	}
 
 	/* Disable IO-PAD and IO-CHAIN wakeup */
 	if (omap3_has_io_wakeup() &&
@@ -439,18 +436,17 @@ restore:
 	list_for_each_entry(pwrst, &pwrst_list, node) {
 		state = pwrdm_read_prev_pwrst(pwrst->pwrdm);
 		if (state > pwrst->next_state) {
-			printk(KERN_INFO "Powerdomain (%s) didn't enter "
-			       "target state %d\n",
+			pr_info("Powerdomain (%s) didn't enter "
+				"target state %d\n",
 			       pwrst->pwrdm->name, pwrst->next_state);
 			ret = -1;
 		}
 		omap_set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state);
 	}
 	if (ret)
-		printk(KERN_ERR "Could not enter target state in pm_suspend\n");
+		pr_err("Could not enter target state in pm_suspend\n");
 	else
-		printk(KERN_INFO "Successfully put all powerdomains "
-		       "to target state\n");
+		pr_info("Successfully put all powerdomains to target state\n");
 
 	return ret;
 }
@@ -701,15 +697,12 @@ static void __init pm_errata_configure(void)
 	}
 }
 
-static int __init omap3_pm_init(void)
+int __init omap3_pm_init(void)
 {
 	struct power_state *pwrst, *tmp;
-	struct clockdomain *neon_clkdm, *per_clkdm, *mpu_clkdm, *core_clkdm;
+	struct clockdomain *neon_clkdm, *mpu_clkdm;
 	int ret;
 
-	if (!cpu_is_omap34xx())
-		return -ENODEV;
-
 	if (!omap3_has_io_chain_ctrl())
 		pr_warning("PM: no software I/O chain control; some wakeups may be lost\n");
 
@@ -734,21 +727,22 @@ static int __init omap3_pm_init(void)
 
 	if (ret) {
 		pr_err("pm: Failed to request pm_io irq\n");
-		goto err1;
+		goto err2;
 	}
 
 	ret = pwrdm_for_each(pwrdms_setup, NULL);
 	if (ret) {
-		printk(KERN_ERR "Failed to setup powerdomains\n");
-		goto err2;
+		pr_err("Failed to setup powerdomains\n");
+		goto err3;
 	}
 
 	(void) clkdm_for_each(omap_pm_clkdms_setup, NULL);
 
 	mpu_pwrdm = pwrdm_lookup("mpu_pwrdm");
 	if (mpu_pwrdm == NULL) {
-		printk(KERN_ERR "Failed to get mpu_pwrdm\n");
-		goto err2;
+		pr_err("Failed to get mpu_pwrdm\n");
+		ret = -EINVAL;
+		goto err3;
 	}
 
 	neon_pwrdm = pwrdm_lookup("neon_pwrdm");
@@ -758,8 +752,6 @@ static int __init omap3_pm_init(void)
 
 	neon_clkdm = clkdm_lookup("neon_clkdm");
 	mpu_clkdm = clkdm_lookup("mpu_clkdm");
-	per_clkdm = clkdm_lookup("per_clkdm");
-	core_clkdm = clkdm_lookup("core_clkdm");
 
 #ifdef CONFIG_SUSPEND
 	omap_pm_suspend = omap3_pm_suspend;
@@ -781,8 +773,8 @@ static int __init omap3_pm_init(void)
 		omap3_secure_ram_storage =
 			kmalloc(0x803F, GFP_KERNEL);
 		if (!omap3_secure_ram_storage)
-			printk(KERN_ERR "Memory allocation failed when"
-					"allocating for secure sram context\n");
+			pr_err("Memory allocation failed when "
+			       "allocating for secure sram context\n");
 
 		local_irq_disable();
 		local_fiq_disable();
@@ -796,15 +788,16 @@ static int __init omap3_pm_init(void)
 	}
 
 	omap3_save_scratchpad_contents();
-err1:
 	return ret;
-err2:
-	free_irq(INT_34XX_PRCM_MPU_IRQ, NULL);
+
+err3:
 	list_for_each_entry_safe(pwrst, tmp, &pwrst_list, node) {
 		list_del(&pwrst->node);
 		kfree(pwrst);
 	}
+	free_irq(omap_prcm_event_to_irq("io"), omap3_pm_init);
+err2:
+	free_irq(omap_prcm_event_to_irq("wkup"), NULL);
+err1:
 	return ret;
 }
-
-late_initcall(omap3_pm_init);
diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c
index 9ccaadc2cf07..ea24174f5707 100644
--- a/arch/arm/mach-omap2/pm44xx.c
+++ b/arch/arm/mach-omap2/pm44xx.c
@@ -141,15 +141,12 @@ static void omap_default_idle(void)
  * Initializes all powerdomain and clockdomain target states
  * and all PRCM settings.
  */
-static int __init omap4_pm_init(void)
+int __init omap4_pm_init(void)
 {
 	int ret;
-	struct clockdomain *emif_clkdm, *mpuss_clkdm, *l3_1_clkdm;
+	struct clockdomain *emif_clkdm, *mpuss_clkdm, *l3_1_clkdm, *l4wkup;
 	struct clockdomain *ducati_clkdm, *l3_2_clkdm, *l4_per_clkdm;
 
-	if (!cpu_is_omap44xx())
-		return -ENODEV;
-
 	if (omap_rev() == OMAP4430_REV_ES1_0) {
 		WARN(1, "Power Management not supported on OMAP4430 ES1.0\n");
 		return -ENODEV;
@@ -168,14 +165,19 @@ static int __init omap4_pm_init(void)
 	 * MPUSS -> L4_PER/L3_* and DUCATI -> L3_* doesn't work as
 	 * expected. The hardware recommendation is to enable static
 	 * dependencies for these to avoid system lock ups or random crashes.
+	 * The L4 wakeup depedency is added to workaround the OCP sync hardware
+	 * BUG with 32K synctimer which lead to incorrect timer value read
+	 * from the 32K counter. The BUG applies for GPTIMER1 and WDT2 which
+	 * are part of L4 wakeup clockdomain.
 	 */
 	mpuss_clkdm = clkdm_lookup("mpuss_clkdm");
 	emif_clkdm = clkdm_lookup("l3_emif_clkdm");
 	l3_1_clkdm = clkdm_lookup("l3_1_clkdm");
 	l3_2_clkdm = clkdm_lookup("l3_2_clkdm");
 	l4_per_clkdm = clkdm_lookup("l4_per_clkdm");
+	l4wkup = clkdm_lookup("l4_wkup_clkdm");
 	ducati_clkdm = clkdm_lookup("ducati_clkdm");
-	if ((!mpuss_clkdm) || (!emif_clkdm) || (!l3_1_clkdm) ||
+	if ((!mpuss_clkdm) || (!emif_clkdm) || (!l3_1_clkdm) || (!l4wkup) ||
 		(!l3_2_clkdm) || (!ducati_clkdm) || (!l4_per_clkdm))
 		goto err2;
 
@@ -183,6 +185,7 @@ static int __init omap4_pm_init(void)
 	ret |= clkdm_add_wkdep(mpuss_clkdm, l3_1_clkdm);
 	ret |= clkdm_add_wkdep(mpuss_clkdm, l3_2_clkdm);
 	ret |= clkdm_add_wkdep(mpuss_clkdm, l4_per_clkdm);
+	ret |= clkdm_add_wkdep(mpuss_clkdm, l4wkup);
 	ret |= clkdm_add_wkdep(ducati_clkdm, l3_1_clkdm);
 	ret |= clkdm_add_wkdep(ducati_clkdm, l3_2_clkdm);
 	if (ret) {
@@ -211,4 +214,3 @@ static int __init omap4_pm_init(void)
 err2:
 	return ret;
 }
-late_initcall(omap4_pm_init);
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index 8a18d1bd61c8..96114901b932 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -972,17 +972,13 @@ int pwrdm_wait_transition(struct powerdomain *pwrdm)
 
 int pwrdm_state_switch(struct powerdomain *pwrdm)
 {
-	return _pwrdm_state_switch(pwrdm, PWRDM_STATE_NOW);
-}
+	int ret;
 
-int pwrdm_clkdm_state_switch(struct clockdomain *clkdm)
-{
-	if (clkdm != NULL && clkdm->pwrdm.ptr != NULL) {
-		pwrdm_wait_transition(clkdm->pwrdm.ptr);
-		return pwrdm_state_switch(clkdm->pwrdm.ptr);
-	}
+	ret = pwrdm_wait_transition(pwrdm);
+	if (!ret)
+		ret = _pwrdm_state_switch(pwrdm, PWRDM_STATE_NOW);
 
-	return -EINVAL;
+	return ret;
 }
 
 int pwrdm_pre_transition(void)
diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h
index 0d72a8a8ce4d..8f88d65c46ea 100644
--- a/arch/arm/mach-omap2/powerdomain.h
+++ b/arch/arm/mach-omap2/powerdomain.h
@@ -213,7 +213,6 @@ bool pwrdm_has_hdwr_sar(struct powerdomain *pwrdm);
 int pwrdm_wait_transition(struct powerdomain *pwrdm);
 
 int pwrdm_state_switch(struct powerdomain *pwrdm);
-int pwrdm_clkdm_state_switch(struct clockdomain *clkdm);
 int pwrdm_pre_transition(void);
 int pwrdm_post_transition(void);
 int pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm);
diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c b/arch/arm/mach-omap2/powerdomains3xxx_data.c
index b7ea468eea32..fb0a0a6869d1 100644
--- a/arch/arm/mach-omap2/powerdomains3xxx_data.c
+++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c
@@ -311,7 +311,7 @@ void __init omap3xxx_powerdomains_init(void)
 		 rev == OMAP3430_REV_ES3_0 || rev == OMAP3630_REV_ES1_0)
 		pwrdm_register_pwrdms(powerdomains_omap3430es2_es3_0);
 	else if (rev == OMAP3430_REV_ES3_1 || rev == OMAP3430_REV_ES3_1_2 ||
-		 rev == OMAP3517_REV_ES1_0 || rev == OMAP3517_REV_ES1_1 ||
+		 rev == AM35XX_REV_ES1_0 || rev == AM35XX_REV_ES1_1 ||
 		 rev == OMAP3630_REV_ES1_1 || rev == OMAP3630_REV_ES1_2)
 		pwrdm_register_pwrdms(powerdomains_omap3430es3_1plus);
 	else
diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
index 5aa5435e3ff1..6da3ba483ad1 100644
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -177,6 +177,8 @@
 /* PM_WKST_WKUP, CM_IDLEST_WKUP shared bits */
 #define OMAP24XX_ST_GPIOS_SHIFT				2
 #define OMAP24XX_ST_GPIOS_MASK				(1 << 2)
+#define OMAP24XX_ST_32KSYNC_SHIFT			1
+#define OMAP24XX_ST_32KSYNC_MASK			(1 << 1)
 #define OMAP24XX_ST_GPT1_SHIFT				0
 #define OMAP24XX_ST_GPT1_MASK				(1 << 0)
 
@@ -307,6 +309,8 @@
 #define OMAP3430_ST_SR1_MASK				(1 << 6)
 #define OMAP3430_ST_GPIO1_SHIFT				3
 #define OMAP3430_ST_GPIO1_MASK				(1 << 3)
+#define OMAP3430_ST_32KSYNC_SHIFT			2
+#define OMAP3430_ST_32KSYNC_MASK			(1 << 2)
 #define OMAP3430_ST_GPT12_SHIFT				1
 #define OMAP3430_ST_GPT12_MASK				(1 << 1)
 #define OMAP3430_ST_GPT1_SHIFT				0
@@ -410,6 +414,19 @@
 extern void __iomem *prm_base;
 extern void __iomem *cm_base;
 extern void __iomem *cm2_base;
+extern void __iomem *prcm_mpu_base;
+
+#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_ARCH_OMAP5)
+extern void omap_prm_base_init(void);
+extern void omap_cm_base_init(void);
+#else
+static inline void omap_prm_base_init(void)
+{
+}
+static inline void omap_cm_base_init(void)
+{
+}
+#endif
 
 /**
  * struct omap_prcm_irq - describes a PRCM interrupt bit
diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c
index 626acfad7190..480f40a5ee42 100644
--- a/arch/arm/mach-omap2/prcm.c
+++ b/arch/arm/mach-omap2/prcm.c
@@ -42,6 +42,7 @@
 void __iomem *prm_base;
 void __iomem *cm_base;
 void __iomem *cm2_base;
+void __iomem *prcm_mpu_base;
 
 #define MAX_MODULE_ENABLE_WAIT		100000
 
@@ -155,4 +156,11 @@ void __init omap2_set_globals_prcm(struct omap_globals *omap2_globals)
 		cm_base = omap2_globals->cm;
 	if (omap2_globals->cm2)
 		cm2_base = omap2_globals->cm2;
+	if (omap2_globals->prcm_mpu)
+		prcm_mpu_base = omap2_globals->prcm_mpu;
+
+	if (cpu_is_omap44xx()) {
+		omap_prm_base_init();
+		omap_cm_base_init();
+	}
 }
diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c
index eac623c7c3d8..f106d21ff581 100644
--- a/arch/arm/mach-omap2/prm44xx.c
+++ b/arch/arm/mach-omap2/prm44xx.c
@@ -147,8 +147,9 @@ static inline u32 _read_pending_irq_reg(u16 irqen_offs, u16 irqst_offs)
 	u32 mask, st;
 
 	/* XXX read mask from RAM? */
-	mask = omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST, irqen_offs);
-	st = omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST, irqst_offs);
+	mask = omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST,
+				       irqen_offs);
+	st = omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST, irqst_offs);
 
 	return mask & st;
 }
@@ -180,7 +181,7 @@ void omap44xx_prm_read_pending_irqs(unsigned long *events)
  */
 void omap44xx_prm_ocp_barrier(void)
 {
-	omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST,
+	omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST,
 				OMAP4_REVISION_PRM_OFFSET);
 }
 
@@ -198,19 +199,19 @@ void omap44xx_prm_ocp_barrier(void)
 void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask)
 {
 	saved_mask[0] =
-		omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST,
+		omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST,
 					OMAP4_PRM_IRQSTATUS_MPU_OFFSET);
 	saved_mask[1] =
-		omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST,
+		omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST,
 					OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET);
 
-	omap4_prm_write_inst_reg(0, OMAP4430_PRM_DEVICE_INST,
+	omap4_prm_write_inst_reg(0, OMAP4430_PRM_OCP_SOCKET_INST,
 				 OMAP4_PRM_IRQENABLE_MPU_OFFSET);
-	omap4_prm_write_inst_reg(0, OMAP4430_PRM_DEVICE_INST,
+	omap4_prm_write_inst_reg(0, OMAP4430_PRM_OCP_SOCKET_INST,
 				 OMAP4_PRM_IRQENABLE_MPU_2_OFFSET);
 
 	/* OCP barrier */
-	omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST,
+	omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST,
 				OMAP4_REVISION_PRM_OFFSET);
 }
 
@@ -226,9 +227,9 @@ void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask)
  */
 void omap44xx_prm_restore_irqen(u32 *saved_mask)
 {
-	omap4_prm_write_inst_reg(saved_mask[0], OMAP4430_PRM_DEVICE_INST,
+	omap4_prm_write_inst_reg(saved_mask[0], OMAP4430_PRM_OCP_SOCKET_INST,
 				 OMAP4_PRM_IRQENABLE_MPU_OFFSET);
-	omap4_prm_write_inst_reg(saved_mask[1], OMAP4430_PRM_DEVICE_INST,
+	omap4_prm_write_inst_reg(saved_mask[1], OMAP4430_PRM_OCP_SOCKET_INST,
 				 OMAP4_PRM_IRQENABLE_MPU_2_OFFSET);
 }
 
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index 873b51d494ea..dfe00ddb5c60 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -237,7 +237,7 @@ void omap_prcm_irq_complete(void)
  */
 int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup)
 {
-	int nr_regs = irq_setup->nr_regs;
+	int nr_regs;
 	u32 mask[OMAP_PRCM_MAX_NR_PENDING_REG];
 	int offset, i;
 	struct irq_chip_generic *gc;
@@ -246,6 +246,8 @@ int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup)
 	if (!irq_setup)
 		return -EINVAL;
 
+	nr_regs = irq_setup->nr_regs;
+
 	if (prcm_irq_setup) {
 		pr_err("PRCM: already initialized; won't reinitialize\n");
 		return -EINVAL;
@@ -290,7 +292,7 @@ int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup)
 		goto err;
 	}
 
-	for (i = 0; i <= irq_setup->nr_regs; i++) {
+	for (i = 0; i < irq_setup->nr_regs; i++) {
 		gc = irq_alloc_generic_chip("PRCM", 1,
 			irq_setup->base_irq + i * 32, prm_base,
 			handle_level_irq);
diff --git a/arch/arm/mach-omap2/prminst44xx.c b/arch/arm/mach-omap2/prminst44xx.c
index 9b3898a3ac9b..c12320c0ae95 100644
--- a/arch/arm/mach-omap2/prminst44xx.c
+++ b/arch/arm/mach-omap2/prminst44xx.c
@@ -18,20 +18,26 @@
 
 #include "iomap.h"
 #include "common.h"
+#include "prcm-common.h"
 #include "prm44xx.h"
 #include "prminst44xx.h"
 #include "prm-regbits-44xx.h"
 #include "prcm44xx.h"
 #include "prcm_mpu44xx.h"
 
-static u32 _prm_bases[OMAP4_MAX_PRCM_PARTITIONS] = {
-	[OMAP4430_INVALID_PRCM_PARTITION]	= 0,
-	[OMAP4430_PRM_PARTITION]		= OMAP4430_PRM_BASE,
-	[OMAP4430_CM1_PARTITION]		= 0,
-	[OMAP4430_CM2_PARTITION]		= 0,
-	[OMAP4430_SCRM_PARTITION]		= 0,
-	[OMAP4430_PRCM_MPU_PARTITION]		= OMAP4430_PRCM_MPU_BASE,
-};
+static void __iomem *_prm_bases[OMAP4_MAX_PRCM_PARTITIONS];
+
+/**
+ * omap_prm_base_init - Populates the prm partitions
+ *
+ * Populates the base addresses of the _prm_bases
+ * array used for read/write of prm module registers.
+ */
+void omap_prm_base_init(void)
+{
+	_prm_bases[OMAP4430_PRM_PARTITION] = prm_base;
+	_prm_bases[OMAP4430_PRCM_MPU_PARTITION] = prcm_mpu_base;
+}
 
 /* Read a register in a PRM instance */
 u32 omap4_prminst_read_inst_reg(u8 part, s16 inst, u16 idx)
@@ -39,8 +45,7 @@ u32 omap4_prminst_read_inst_reg(u8 part, s16 inst, u16 idx)
 	BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS ||
 	       part == OMAP4430_INVALID_PRCM_PARTITION ||
 	       !_prm_bases[part]);
-	return __raw_readl(OMAP2_L4_IO_ADDRESS(_prm_bases[part] + inst +
-					       idx));
+	return __raw_readl(_prm_bases[part] + inst + idx);
 }
 
 /* Write into a register in a PRM instance */
@@ -49,7 +54,7 @@ void omap4_prminst_write_inst_reg(u32 val, u8 part, s16 inst, u16 idx)
 	BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS ||
 	       part == OMAP4430_INVALID_PRCM_PARTITION ||
 	       !_prm_bases[part]);
-	__raw_writel(val, OMAP2_L4_IO_ADDRESS(_prm_bases[part] + inst + idx));
+	__raw_writel(val, _prm_bases[part] + inst + idx);
 }
 
 /* Read-modify-write a register in PRM. Caller must lock */
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 0cdd359a128e..292d4aaca068 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -108,8 +108,14 @@ static void omap_uart_set_noidle(struct platform_device *pdev)
 static void omap_uart_set_smartidle(struct platform_device *pdev)
 {
 	struct omap_device *od = to_omap_device(pdev);
+	u8 idlemode;
 
-	omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_SMART);
+	if (od->hwmods[0]->class->sysc->idlemodes & SIDLE_SMART_WKUP)
+		idlemode = HWMOD_IDLEMODE_SMART_WKUP;
+	else
+		idlemode = HWMOD_IDLEMODE_SMART;
+
+	omap_hwmod_set_slave_idlemode(od->hwmods[0], idlemode);
 }
 
 #else
@@ -120,130 +126,14 @@ static void omap_uart_set_smartidle(struct platform_device *pdev) {}
 #endif /* CONFIG_PM */
 
 #ifdef CONFIG_OMAP_MUX
-static struct omap_device_pad default_uart1_pads[] __initdata = {
-	{
-		.name	= "uart1_cts.uart1_cts",
-		.enable	= OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "uart1_rts.uart1_rts",
-		.enable	= OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "uart1_tx.uart1_tx",
-		.enable	= OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "uart1_rx.uart1_rx",
-		.flags	= OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
-		.enable	= OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
-		.idle	= OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
-	},
-};
-
-static struct omap_device_pad default_uart2_pads[] __initdata = {
-	{
-		.name	= "uart2_cts.uart2_cts",
-		.enable	= OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "uart2_rts.uart2_rts",
-		.enable	= OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "uart2_tx.uart2_tx",
-		.enable	= OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "uart2_rx.uart2_rx",
-		.flags	= OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
-		.enable	= OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
-		.idle	= OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
-	},
-};
-
-static struct omap_device_pad default_uart3_pads[] __initdata = {
-	{
-		.name	= "uart3_cts_rctx.uart3_cts_rctx",
-		.enable	= OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "uart3_rts_sd.uart3_rts_sd",
-		.enable	= OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "uart3_tx_irtx.uart3_tx_irtx",
-		.enable	= OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "uart3_rx_irrx.uart3_rx_irrx",
-		.flags	= OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
-		.enable	= OMAP_PIN_INPUT | OMAP_MUX_MODE0,
-		.idle	= OMAP_PIN_INPUT | OMAP_MUX_MODE0,
-	},
-};
-
-static struct omap_device_pad default_omap36xx_uart4_pads[] __initdata = {
-	{
-		.name   = "gpmc_wait2.uart4_tx",
-		.enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "gpmc_wait3.uart4_rx",
-		.flags	= OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
-		.enable	= OMAP_PIN_INPUT | OMAP_MUX_MODE2,
-		.idle	= OMAP_PIN_INPUT | OMAP_MUX_MODE2,
-	},
-};
-
-static struct omap_device_pad default_omap4_uart4_pads[] __initdata = {
-	{
-		.name	= "uart4_tx.uart4_tx",
-		.enable	= OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "uart4_rx.uart4_rx",
-		.flags	= OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
-		.enable	= OMAP_PIN_INPUT | OMAP_MUX_MODE0,
-		.idle	= OMAP_PIN_INPUT | OMAP_MUX_MODE0,
-	},
-};
-
 static void omap_serial_fill_default_pads(struct omap_board_data *bdata)
 {
-	switch (bdata->id) {
-	case 0:
-		bdata->pads = default_uart1_pads;
-		bdata->pads_cnt = ARRAY_SIZE(default_uart1_pads);
-		break;
-	case 1:
-		bdata->pads = default_uart2_pads;
-		bdata->pads_cnt = ARRAY_SIZE(default_uart2_pads);
-		break;
-	case 2:
-		bdata->pads = default_uart3_pads;
-		bdata->pads_cnt = ARRAY_SIZE(default_uart3_pads);
-		break;
-	case 3:
-		if (cpu_is_omap44xx()) {
-			bdata->pads = default_omap4_uart4_pads;
-			bdata->pads_cnt =
-				ARRAY_SIZE(default_omap4_uart4_pads);
-		} else if (cpu_is_omap3630()) {
-			bdata->pads = default_omap36xx_uart4_pads;
-			bdata->pads_cnt =
-				ARRAY_SIZE(default_omap36xx_uart4_pads);
-		}
-		break;
-	default:
-		break;
-	}
 }
 #else
 static void omap_serial_fill_default_pads(struct omap_board_data *bdata) {}
 #endif
 
-char *cmdline_find_option(char *str)
+static char *cmdline_find_option(char *str)
 {
 	extern char *saved_command_line;
 
@@ -355,14 +245,6 @@ void __init omap_serial_init_port(struct omap_board_data *bdata,
 	omap_up.dma_rx_poll_rate = info->dma_rx_poll_rate;
 	omap_up.autosuspend_timeout = info->autosuspend_timeout;
 
-	/* Enable the MDR1 Errata i202 for OMAP2430/3xxx/44xx */
-	if (!cpu_is_omap2420() && !cpu_is_ti816x())
-		omap_up.errata |= UART_ERRATA_i202_MDR1_ACCESS;
-
-	/* Enable DMA Mode Force Idle Errata i291 for omap34xx/3630 */
-	if (cpu_is_omap34xx() || cpu_is_omap3630())
-		omap_up.errata |= UART_ERRATA_i291_DMA_FORCEIDLE;
-
 	pdata = &omap_up;
 	pdata_size = sizeof(struct omap_uart_port_info);
 
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index c512bac69ec5..840929bd9dae 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -90,7 +90,7 @@ static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id)
 }
 
 static struct irqaction omap2_gp_timer_irq = {
-	.name		= "gp timer",
+	.name		= "gp_timer",
 	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
 	.handler	= omap2_gp_timer_interrupt,
 };
@@ -132,7 +132,7 @@ static void omap2_gp_timer_set_mode(enum clock_event_mode mode,
 }
 
 static struct clock_event_device clockevent_gpt = {
-	.name		= "gp timer",
+	.name		= "gp_timer",
 	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
 	.shift		= 32,
 	.set_next_event	= omap2_gp_timer_set_next_event,
@@ -145,8 +145,10 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer,
 {
 	char name[10]; /* 10 = sizeof("gptXX_Xck0") */
 	struct omap_hwmod *oh;
+	struct resource irq_rsrc, mem_rsrc;
 	size_t size;
 	int res = 0;
+	int r;
 
 	sprintf(name, "timer%d", gptimer_id);
 	omap_hwmod_setup_one(name);
@@ -154,9 +156,16 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer,
 	if (!oh)
 		return -ENODEV;
 
-	timer->irq = oh->mpu_irqs[0].irq;
-	timer->phys_base = oh->slaves[0]->addr->pa_start;
-	size = oh->slaves[0]->addr->pa_end - timer->phys_base;
+	r = omap_hwmod_get_resource_byname(oh, IORESOURCE_IRQ, NULL, &irq_rsrc);
+	if (r)
+		return -ENXIO;
+	timer->irq = irq_rsrc.start;
+
+	r = omap_hwmod_get_resource_byname(oh, IORESOURCE_MEM, NULL, &mem_rsrc);
+	if (r)
+		return -ENXIO;
+	timer->phys_base = mem_rsrc.start;
+	size = mem_rsrc.end - mem_rsrc.start;
 
 	/* Static mapping, never released */
 	timer->io_base = ioremap(timer->phys_base, size);
@@ -169,13 +178,6 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer,
 	if (IS_ERR(timer->fclk))
 		return -ENODEV;
 
-	sprintf(name, "gpt%d_ick", gptimer_id);
-	timer->iclk = clk_get(NULL, name);
-	if (IS_ERR(timer->iclk)) {
-		clk_put(timer->fclk);
-		return -ENODEV;
-	}
-
 	omap_hwmod_enable(oh);
 
 	sys_timer_reserved |= (1 << (gptimer_id - 1));
@@ -234,22 +236,8 @@ static void __init omap2_gp_clockevent_init(int gptimer_id,
 }
 
 /* Clocksource code */
-
-#ifdef CONFIG_OMAP_32K_TIMER
-/*
- * When 32k-timer is enabled, don't use GPTimer for clocksource
- * instead, just leave default clocksource which uses the 32k
- * sync counter.  See clocksource setup in plat-omap/counter_32k.c
- */
-
-static void __init omap2_gp_clocksource_init(int unused, const char *dummy)
-{
-	omap_init_clocksource_32k();
-}
-
-#else
-
 static struct omap_dm_timer clksrc;
+static bool use_gptimer_clksrc;
 
 /*
  * clocksource
@@ -260,7 +248,7 @@ static cycle_t clocksource_read_cycles(struct clocksource *cs)
 }
 
 static struct clocksource clocksource_gpt = {
-	.name		= "gp timer",
+	.name		= "gp_timer",
 	.rating		= 300,
 	.read		= clocksource_read_cycles,
 	.mask		= CLOCKSOURCE_MASK(32),
@@ -276,7 +264,46 @@ static u32 notrace dmtimer_read_sched_clock(void)
 }
 
 /* Setup free-running counter for clocksource */
-static void __init omap2_gp_clocksource_init(int gptimer_id,
+static int __init omap2_sync32k_clocksource_init(void)
+{
+	int ret;
+	struct omap_hwmod *oh;
+	void __iomem *vbase;
+	const char *oh_name = "counter_32k";
+
+	/*
+	 * First check hwmod data is available for sync32k counter
+	 */
+	oh = omap_hwmod_lookup(oh_name);
+	if (!oh || oh->slaves_cnt == 0)
+		return -ENODEV;
+
+	omap_hwmod_setup_one(oh_name);
+
+	vbase = omap_hwmod_get_mpu_rt_va(oh);
+	if (!vbase) {
+		pr_warn("%s: failed to get counter_32k resource\n", __func__);
+		return -ENXIO;
+	}
+
+	ret = omap_hwmod_enable(oh);
+	if (ret) {
+		pr_warn("%s: failed to enable counter_32k module (%d)\n",
+							__func__, ret);
+		return ret;
+	}
+
+	ret = omap_init_clocksource_32k(vbase);
+	if (ret) {
+		pr_warn("%s: failed to initialize counter_32k as a clocksource (%d)\n",
+							__func__, ret);
+		omap_hwmod_idle(oh);
+	}
+
+	return ret;
+}
+
+static void __init omap2_gptimer_clocksource_init(int gptimer_id,
 						const char *fck_source)
 {
 	int res;
@@ -284,9 +311,6 @@ static void __init omap2_gp_clocksource_init(int gptimer_id,
 	res = omap_dm_timer_init_one(&clksrc, gptimer_id, fck_source);
 	BUG_ON(res);
 
-	pr_info("OMAP clocksource: GPTIMER%d at %lu Hz\n",
-		gptimer_id, clksrc.rate);
-
 	__omap_dm_timer_load_start(&clksrc,
 			OMAP_TIMER_CTRL_ST | OMAP_TIMER_CTRL_AR, 0, 1);
 	setup_sched_clock(dmtimer_read_sched_clock, 32, clksrc.rate);
@@ -294,15 +318,36 @@ static void __init omap2_gp_clocksource_init(int gptimer_id,
 	if (clocksource_register_hz(&clocksource_gpt, clksrc.rate))
 		pr_err("Could not register clocksource %s\n",
 			clocksource_gpt.name);
+	else
+		pr_info("OMAP clocksource: GPTIMER%d at %lu Hz\n",
+			gptimer_id, clksrc.rate);
+}
+
+static void __init omap2_clocksource_init(int gptimer_id,
+						const char *fck_source)
+{
+	/*
+	 * First give preference to kernel parameter configuration
+	 * by user (clocksource="gp_timer").
+	 *
+	 * In case of missing kernel parameter for clocksource,
+	 * first check for availability for 32k-sync timer, in case
+	 * of failure in finding 32k_counter module or registering
+	 * it as clocksource, execution will fallback to gp-timer.
+	 */
+	if (use_gptimer_clksrc == true)
+		omap2_gptimer_clocksource_init(gptimer_id, fck_source);
+	else if (omap2_sync32k_clocksource_init())
+		/* Fall back to gp-timer code */
+		omap2_gptimer_clocksource_init(gptimer_id, fck_source);
 }
-#endif
 
 #define OMAP_SYS_TIMER_INIT(name, clkev_nr, clkev_src,			\
 				clksrc_nr, clksrc_src)			\
 static void __init omap##name##_timer_init(void)			\
 {									\
 	omap2_gp_clockevent_init((clkev_nr), clkev_src);		\
-	omap2_gp_clocksource_init((clksrc_nr), clksrc_src);		\
+	omap2_clocksource_init((clksrc_nr), clksrc_src);		\
 }
 
 #define OMAP_SYS_TIMER(name)						\
@@ -333,7 +378,7 @@ static DEFINE_TWD_LOCAL_TIMER(twd_local_timer,
 static void __init omap4_timer_init(void)
 {
 	omap2_gp_clockevent_init(1, OMAP4_CLKEV_SOURCE);
-	omap2_gp_clocksource_init(2, OMAP4_MPU_SOURCE);
+	omap2_clocksource_init(2, OMAP4_MPU_SOURCE);
 #ifdef CONFIG_LOCAL_TIMERS
 	/* Local timers are not supprted on OMAP4430 ES1.0 */
 	if (omap_rev() != OMAP4430_REV_ES1_0) {
@@ -501,3 +546,28 @@ static int __init omap2_dm_timer_init(void)
 	return 0;
 }
 arch_initcall(omap2_dm_timer_init);
+
+/**
+ * omap2_override_clocksource - clocksource override with user configuration
+ *
+ * Allows user to override default clocksource, using kernel parameter
+ *   clocksource="gp_timer"	(For all OMAP2PLUS architectures)
+ *
+ * Note that, here we are using same standard kernel parameter "clocksource=",
+ * and not introducing any OMAP specific interface.
+ */
+static int __init omap2_override_clocksource(char *str)
+{
+	if (!str)
+		return 0;
+	/*
+	 * For OMAP architecture, we only have two options
+	 *    - sync_32k (default)
+	 *    - gp_timer (sys_clk based)
+	 */
+	if (!strcmp(str, "gp_timer"))
+		use_gptimer_clksrc = true;
+
+	return 0;
+}
+early_param("clocksource", omap2_override_clocksource);
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index 4b57757bf9d1..119d5a910f3a 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -31,12 +31,35 @@
 
 #include "twl-common.h"
 #include "pm.h"
+#include "voltage.h"
 
 static struct i2c_board_info __initdata pmic_i2c_board_info = {
 	.addr		= 0x48,
 	.flags		= I2C_CLIENT_WAKE,
 };
 
+static struct i2c_board_info __initdata omap4_i2c1_board_info[] = {
+	{
+		.addr		= 0x48,
+		.flags		= I2C_CLIENT_WAKE,
+	},
+	{
+		I2C_BOARD_INFO("twl6040", 0x4b),
+	},
+};
+
+static int twl_set_voltage(void *data, int target_uV)
+{
+	struct voltagedomain *voltdm = (struct voltagedomain *)data;
+	return voltdm_scale(voltdm, target_uV);
+}
+
+static int twl_get_voltage(void *data)
+{
+	struct voltagedomain *voltdm = (struct voltagedomain *)data;
+	return voltdm_get_voltage(voltdm);
+}
+
 void __init omap_pmic_init(int bus, u32 clkrate,
 			   const char *pmic_type, int pmic_irq,
 			   struct twl4030_platform_data *pmic_data)
@@ -49,14 +72,31 @@ void __init omap_pmic_init(int bus, u32 clkrate,
 	omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1);
 }
 
+void __init omap4_pmic_init(const char *pmic_type,
+		    struct twl4030_platform_data *pmic_data,
+		    struct twl6040_platform_data *twl6040_data, int twl6040_irq)
+{
+	/* PMIC part*/
+	strncpy(omap4_i2c1_board_info[0].type, pmic_type,
+		sizeof(omap4_i2c1_board_info[0].type));
+	omap4_i2c1_board_info[0].irq = OMAP44XX_IRQ_SYS_1N;
+	omap4_i2c1_board_info[0].platform_data = pmic_data;
+
+	/* TWL6040 audio IC part */
+	omap4_i2c1_board_info[1].irq = twl6040_irq;
+	omap4_i2c1_board_info[1].platform_data = twl6040_data;
+
+	omap_register_i2c_bus(1, 400, omap4_i2c1_board_info, 2);
+
+}
+
 void __init omap_pmic_late_init(void)
 {
 	/* Init the OMAP TWL parameters (if PMIC has been registerd) */
-	if (!pmic_i2c_board_info.irq)
-		return;
-
-	omap3_twl_init();
-	omap4_twl_init();
+	if (pmic_i2c_board_info.irq)
+		omap3_twl_init();
+	if (omap4_i2c1_board_info[0].irq)
+		omap4_twl_init();
 }
 
 #if defined(CONFIG_ARCH_OMAP3)
@@ -126,6 +166,48 @@ static struct regulator_init_data omap3_vpll2_idata = {
 	.consumer_supplies		= omap3_vpll2_supplies,
 };
 
+static struct regulator_consumer_supply omap3_vdd1_supply[] = {
+	REGULATOR_SUPPLY("vcc", "mpu.0"),
+};
+
+static struct regulator_consumer_supply omap3_vdd2_supply[] = {
+	REGULATOR_SUPPLY("vcc", "l3_main.0"),
+};
+
+static struct regulator_init_data omap3_vdd1 = {
+	.constraints = {
+		.name			= "vdd_mpu_iva",
+		.min_uV			= 600000,
+		.max_uV			= 1450000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE,
+	},
+	.num_consumer_supplies		= ARRAY_SIZE(omap3_vdd1_supply),
+	.consumer_supplies		= omap3_vdd1_supply,
+};
+
+static struct regulator_init_data omap3_vdd2 = {
+	.constraints = {
+		.name			= "vdd_core",
+		.min_uV			= 600000,
+		.max_uV			= 1450000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE,
+	},
+	.num_consumer_supplies		= ARRAY_SIZE(omap3_vdd2_supply),
+	.consumer_supplies		= omap3_vdd2_supply,
+};
+
+static struct twl_regulator_driver_data omap3_vdd1_drvdata = {
+	.get_voltage = twl_get_voltage,
+	.set_voltage = twl_set_voltage,
+};
+
+static struct twl_regulator_driver_data omap3_vdd2_drvdata = {
+	.get_voltage = twl_get_voltage,
+	.set_voltage = twl_set_voltage,
+};
+
 void __init omap3_pmic_get_config(struct twl4030_platform_data *pmic_data,
 				  u32 pdata_flags, u32 regulators_flags)
 {
@@ -133,6 +215,16 @@ void __init omap3_pmic_get_config(struct twl4030_platform_data *pmic_data,
 		pmic_data->irq_base = TWL4030_IRQ_BASE;
 	if (!pmic_data->irq_end)
 		pmic_data->irq_end = TWL4030_IRQ_END;
+	if (!pmic_data->vdd1) {
+		omap3_vdd1.driver_data = &omap3_vdd1_drvdata;
+		omap3_vdd1_drvdata.data = voltdm_lookup("mpu_iva");
+		pmic_data->vdd1 = &omap3_vdd1;
+	}
+	if (!pmic_data->vdd2) {
+		omap3_vdd2.driver_data = &omap3_vdd2_drvdata;
+		omap3_vdd2_drvdata.data = voltdm_lookup("core");
+		pmic_data->vdd2 = &omap3_vdd2;
+	}
 
 	/* Common platform data configurations */
 	if (pdata_flags & TWL_COMMON_PDATA_USB && !pmic_data->usb)
@@ -174,6 +266,7 @@ static struct regulator_init_data omap4_vdac_idata = {
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
+	.supply_regulator	= "V2V1",
 };
 
 static struct regulator_init_data omap4_vaux2_idata = {
@@ -264,6 +357,7 @@ static struct regulator_init_data omap4_vcxio_idata = {
 	},
 	.num_consumer_supplies	= ARRAY_SIZE(omap4_vcxio_supply),
 	.consumer_supplies	= omap4_vcxio_supply,
+	.supply_regulator	= "V2V1",
 };
 
 static struct regulator_init_data omap4_vusb_idata = {
@@ -283,6 +377,105 @@ static struct regulator_init_data omap4_clk32kg_idata = {
 	},
 };
 
+static struct regulator_consumer_supply omap4_vdd1_supply[] = {
+	REGULATOR_SUPPLY("vcc", "mpu.0"),
+};
+
+static struct regulator_consumer_supply omap4_vdd2_supply[] = {
+	REGULATOR_SUPPLY("vcc", "iva.0"),
+};
+
+static struct regulator_consumer_supply omap4_vdd3_supply[] = {
+	REGULATOR_SUPPLY("vcc", "l3_main.0"),
+};
+
+static struct regulator_init_data omap4_vdd1 = {
+	.constraints = {
+		.name			= "vdd_mpu",
+		.min_uV			= 500000,
+		.max_uV			= 1500000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE,
+	},
+	.num_consumer_supplies		= ARRAY_SIZE(omap4_vdd1_supply),
+	.consumer_supplies		= omap4_vdd1_supply,
+};
+
+static struct regulator_init_data omap4_vdd2 = {
+	.constraints = {
+		.name			= "vdd_iva",
+		.min_uV			= 500000,
+		.max_uV			= 1500000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE,
+	},
+	.num_consumer_supplies		= ARRAY_SIZE(omap4_vdd2_supply),
+	.consumer_supplies		= omap4_vdd2_supply,
+};
+
+static struct regulator_init_data omap4_vdd3 = {
+	.constraints = {
+		.name			= "vdd_core",
+		.min_uV			= 500000,
+		.max_uV			= 1500000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE,
+	},
+	.num_consumer_supplies		= ARRAY_SIZE(omap4_vdd3_supply),
+	.consumer_supplies		= omap4_vdd3_supply,
+};
+
+
+static struct twl_regulator_driver_data omap4_vdd1_drvdata = {
+	.get_voltage = twl_get_voltage,
+	.set_voltage = twl_set_voltage,
+};
+
+static struct twl_regulator_driver_data omap4_vdd2_drvdata = {
+	.get_voltage = twl_get_voltage,
+	.set_voltage = twl_set_voltage,
+};
+
+static struct twl_regulator_driver_data omap4_vdd3_drvdata = {
+	.get_voltage = twl_get_voltage,
+	.set_voltage = twl_set_voltage,
+};
+
+static struct regulator_consumer_supply omap4_v1v8_supply[] = {
+	REGULATOR_SUPPLY("vio", "1-004b"),
+};
+
+static struct regulator_init_data omap4_v1v8_idata = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+		.always_on		= true,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(omap4_v1v8_supply),
+	.consumer_supplies	= omap4_v1v8_supply,
+};
+
+static struct regulator_consumer_supply omap4_v2v1_supply[] = {
+	REGULATOR_SUPPLY("v2v1", "1-004b"),
+};
+
+static struct regulator_init_data omap4_v2v1_idata = {
+	.constraints = {
+		.min_uV			= 2100000,
+		.max_uV			= 2100000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(omap4_v2v1_supply),
+	.consumer_supplies	= omap4_v2v1_supply,
+};
+
 void __init omap4_pmic_get_config(struct twl4030_platform_data *pmic_data,
 				  u32 pdata_flags, u32 regulators_flags)
 {
@@ -291,6 +484,24 @@ void __init omap4_pmic_get_config(struct twl4030_platform_data *pmic_data,
 	if (!pmic_data->irq_end)
 		pmic_data->irq_end = TWL6030_IRQ_END;
 
+	if (!pmic_data->vdd1) {
+		omap4_vdd1.driver_data = &omap4_vdd1_drvdata;
+		omap4_vdd1_drvdata.data = voltdm_lookup("mpu");
+		pmic_data->vdd1 = &omap4_vdd1;
+	}
+
+	if (!pmic_data->vdd2) {
+		omap4_vdd2.driver_data = &omap4_vdd2_drvdata;
+		omap4_vdd2_drvdata.data = voltdm_lookup("iva");
+		pmic_data->vdd2 = &omap4_vdd2;
+	}
+
+	if (!pmic_data->vdd3) {
+		omap4_vdd3.driver_data = &omap4_vdd3_drvdata;
+		omap4_vdd3_drvdata.data = voltdm_lookup("core");
+		pmic_data->vdd3 = &omap4_vdd3;
+	}
+
 	/* Common platform data configurations */
 	if (pdata_flags & TWL_COMMON_PDATA_USB && !pmic_data->usb)
 		pmic_data->usb = &omap4_usb_pdata;
@@ -323,5 +534,11 @@ void __init omap4_pmic_get_config(struct twl4030_platform_data *pmic_data,
 	if (regulators_flags & TWL_COMMON_REGULATOR_CLK32KG &&
 	    !pmic_data->clk32kg)
 		pmic_data->clk32kg = &omap4_clk32kg_idata;
+
+	if (regulators_flags & TWL_COMMON_REGULATOR_V1V8 && !pmic_data->v1v8)
+		pmic_data->v1v8 = &omap4_v1v8_idata;
+
+	if (regulators_flags & TWL_COMMON_REGULATOR_V2V1 && !pmic_data->v2v1)
+		pmic_data->v2v1 = &omap4_v2v1_idata;
 }
 #endif /* CONFIG_ARCH_OMAP4 */
diff --git a/arch/arm/mach-omap2/twl-common.h b/arch/arm/mach-omap2/twl-common.h
index 275dde8cb27a..8fe71cfd002c 100644
--- a/arch/arm/mach-omap2/twl-common.h
+++ b/arch/arm/mach-omap2/twl-common.h
@@ -22,6 +22,8 @@
 #define TWL_COMMON_REGULATOR_VCXIO	(1 << 8)
 #define TWL_COMMON_REGULATOR_VUSB	(1 << 9)
 #define TWL_COMMON_REGULATOR_CLK32KG	(1 << 10)
+#define TWL_COMMON_REGULATOR_V1V8	(1 << 11)
+#define TWL_COMMON_REGULATOR_V2V1	(1 << 12)
 
 /* TWL4030 LDO regulators */
 #define TWL_COMMON_REGULATOR_VPLL1	(1 << 4)
@@ -29,6 +31,7 @@
 
 
 struct twl4030_platform_data;
+struct twl6040_platform_data;
 
 void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq,
 		    struct twl4030_platform_data *pmic_data);
@@ -46,12 +49,9 @@ static inline void omap3_pmic_init(const char *pmic_type,
 	omap_pmic_init(1, 2600, pmic_type, INT_34XX_SYS_NIRQ, pmic_data);
 }
 
-static inline void omap4_pmic_init(const char *pmic_type,
-				   struct twl4030_platform_data *pmic_data)
-{
-	/* Phoenix Audio IC needs I2C1 to start with 400 KHz or less */
-	omap_pmic_init(1, 400, pmic_type, OMAP44XX_IRQ_SYS_1N, pmic_data);
-}
+void omap4_pmic_init(const char *pmic_type,
+		    struct twl4030_platform_data *pmic_data,
+		    struct twl6040_platform_data *audio_data, int twl6040_irq);
 
 void omap3_pmic_get_config(struct twl4030_platform_data *pmic_data,
 			   u32 pdata_flags, u32 regulators_flags);
diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c
index f51348dafafd..dde8a11f47d5 100644
--- a/arch/arm/mach-omap2/usb-host.c
+++ b/arch/arm/mach-omap2/usb-host.c
@@ -54,7 +54,7 @@ static struct omap_device_pm_latency omap_uhhtll_latency[] = {
 /*
  * setup_ehci_io_mux - initialize IO pad mux for USBHOST
  */
-static void setup_ehci_io_mux(const enum usbhs_omap_port_mode *port_mode)
+static void __init setup_ehci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 {
 	switch (port_mode[0]) {
 	case OMAP_EHCI_PORT_MODE_PHY:
@@ -197,7 +197,8 @@ static void setup_ehci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 	return;
 }
 
-static void setup_4430ehci_io_mux(const enum usbhs_omap_port_mode *port_mode)
+static
+void __init setup_4430ehci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 {
 	switch (port_mode[0]) {
 	case OMAP_EHCI_PORT_MODE_PHY:
@@ -315,7 +316,7 @@ static void setup_4430ehci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 	}
 }
 
-static void setup_ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
+static void __init setup_ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 {
 	switch (port_mode[0]) {
 	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
@@ -412,7 +413,8 @@ static void setup_ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 	}
 }
 
-static void setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
+static
+void __init setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 {
 	switch (port_mode[0]) {
 	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index 8d5ed775dd56..b19d1b43c12e 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -90,7 +90,7 @@ void __init usb_musb_init(struct omap_musb_board_data *musb_board_data)
 	musb_plat.mode = board_data->mode;
 	musb_plat.extvbus = board_data->extvbus;
 
-	if (cpu_is_omap3517() || cpu_is_omap3505()) {
+	if (soc_is_am35xx()) {
 		oh_name = "am35x_otg_hs";
 		name = "musb-am35x";
 	} else if (cpu_is_ti81xx()) {
diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c
index 994d8f591a1d..db84a46ce7fd 100644
--- a/arch/arm/mach-omap2/usb-tusb6010.c
+++ b/arch/arm/mach-omap2/usb-tusb6010.c
@@ -126,7 +126,7 @@ static int tusb_set_sync_mode(unsigned sysclk_ps, unsigned fclk_ps)
 	tmp = (t.sync_clk + fclk_ps - 1) / fclk_ps;
 	if (tmp > 4)
 		return -ERANGE;
-	if (tmp <= 0)
+	if (tmp == 0)
 		tmp = 1;
 	t.page_burst_access = (fclk_ps * tmp) / 1000;
 
diff --git a/arch/arm/mach-omap2/vc3xxx_data.c b/arch/arm/mach-omap2/vc3xxx_data.c
index a5ec7f8f2ea8..5d8eaf31569c 100644
--- a/arch/arm/mach-omap2/vc3xxx_data.c
+++ b/arch/arm/mach-omap2/vc3xxx_data.c
@@ -46,6 +46,7 @@ static struct omap_vc_common omap3_vc_common = {
 };
 
 struct omap_vc_channel omap3_vc_mpu = {
+	.flags = OMAP_VC_CHANNEL_DEFAULT,
 	.common = &omap3_vc_common,
 	.smps_sa_reg	 = OMAP3_PRM_VC_SMPS_SA_OFFSET,
 	.smps_volra_reg	 = OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET,
diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c
index 8a36342e60d2..4dc60e83e00d 100644
--- a/arch/arm/mach-omap2/voltage.c
+++ b/arch/arm/mach-omap2/voltage.c
@@ -73,7 +73,8 @@ unsigned long voltdm_get_voltage(struct voltagedomain *voltdm)
 int voltdm_scale(struct voltagedomain *voltdm,
 		 unsigned long target_volt)
 {
-	int ret;
+	int ret, i;
+	unsigned long volt = 0;
 
 	if (!voltdm || IS_ERR(voltdm)) {
 		pr_warning("%s: VDD specified does not exist!\n", __func__);
@@ -86,9 +87,23 @@ int voltdm_scale(struct voltagedomain *voltdm,
 		return -ENODATA;
 	}
 
-	ret = voltdm->scale(voltdm, target_volt);
+	/* Adjust voltage to the exact voltage from the OPP table */
+	for (i = 0; voltdm->volt_data[i].volt_nominal != 0; i++) {
+		if (voltdm->volt_data[i].volt_nominal >= target_volt) {
+			volt = voltdm->volt_data[i].volt_nominal;
+			break;
+		}
+	}
+
+	if (!volt) {
+		pr_warning("%s: not scaling. OPP voltage for %lu, not found.\n",
+			   __func__, target_volt);
+		return -EINVAL;
+	}
+
+	ret = voltdm->scale(voltdm, volt);
 	if (!ret)
-		voltdm->nominal_volt = target_volt;
+		voltdm->nominal_volt = volt;
 
 	return ret;
 }
diff --git a/arch/arm/mach-omap2/voltagedomains3xxx_data.c b/arch/arm/mach-omap2/voltagedomains3xxx_data.c
index 57db2038b23c..d0103c80d040 100644
--- a/arch/arm/mach-omap2/voltagedomains3xxx_data.c
+++ b/arch/arm/mach-omap2/voltagedomains3xxx_data.c
@@ -118,7 +118,7 @@ void __init omap3xxx_voltagedomains_init(void)
 	}
 #endif
 
-	if (cpu_is_omap3517() || cpu_is_omap3505())
+	if (soc_is_am35xx())
 		voltdms = voltagedomains_am35xx;
 	else
 		voltdms = voltagedomains_omap3;
diff --git a/arch/arm/mach-omap2/wd_timer.c b/arch/arm/mach-omap2/wd_timer.c
index 4067669d96c4..b2f1c67043a2 100644
--- a/arch/arm/mach-omap2/wd_timer.c
+++ b/arch/arm/mach-omap2/wd_timer.c
@@ -14,6 +14,7 @@
 #include <plat/omap_hwmod.h>
 
 #include "wd_timer.h"
+#include "common.h"
 
 /*
  * In order to avoid any assumptions from bootloader regarding WDT
@@ -25,6 +26,8 @@
 #define OMAP_WDT_WPS		0x34
 #define OMAP_WDT_SPR		0x48
 
+/* Maximum microseconds to wait for OMAP module to softreset */
+#define MAX_MODULE_SOFTRESET_WAIT	10000
 
 int omap2_wd_timer_disable(struct omap_hwmod *oh)
 {
@@ -54,3 +57,45 @@ int omap2_wd_timer_disable(struct omap_hwmod *oh)
 	return 0;
 }
 
+/**
+ * omap2_wdtimer_reset - reset and disable the WDTIMER IP block
+ * @oh: struct omap_hwmod *
+ *
+ * After the WDTIMER IP blocks are reset on OMAP2/3, we must also take
+ * care to execute the special watchdog disable sequence.  This is
+ * because the watchdog is re-armed upon OCP softreset.  (On OMAP4,
+ * this behavior was apparently changed and the watchdog is no longer
+ * re-armed after an OCP soft-reset.)  Returns -ETIMEDOUT if the reset
+ * did not complete, or 0 upon success.
+ *
+ * XXX Most of this code should be moved to the omap_hwmod.c layer
+ * during a normal merge window.  omap_hwmod_softreset() should be
+ * renamed to omap_hwmod_set_ocp_softreset(), and omap_hwmod_softreset()
+ * should call the hwmod _ocp_softreset() code.
+ */
+int omap2_wd_timer_reset(struct omap_hwmod *oh)
+{
+	int c = 0;
+
+	/* Write to the SOFTRESET bit */
+	omap_hwmod_softreset(oh);
+
+	/* Poll on RESETDONE bit */
+	omap_test_timeout((omap_hwmod_read(oh,
+					   oh->class->sysc->syss_offs)
+			   & SYSS_RESETDONE_MASK),
+			  MAX_MODULE_SOFTRESET_WAIT, c);
+
+	if (oh->class->sysc->srst_udelay)
+		udelay(oh->class->sysc->srst_udelay);
+
+	if (c == MAX_MODULE_SOFTRESET_WAIT)
+		pr_warning("%s: %s: softreset failed (waited %d usec)\n",
+			   __func__, oh->name, MAX_MODULE_SOFTRESET_WAIT);
+	else
+		pr_debug("%s: %s: softreset in %d usec\n", __func__,
+			 oh->name, c);
+
+	return (c == MAX_MODULE_SOFTRESET_WAIT) ? -ETIMEDOUT :
+		omap2_wd_timer_disable(oh);
+}
diff --git a/arch/arm/mach-omap2/wd_timer.h b/arch/arm/mach-omap2/wd_timer.h
index e0054a2d5505..f6bbba73b535 100644
--- a/arch/arm/mach-omap2/wd_timer.h
+++ b/arch/arm/mach-omap2/wd_timer.h
@@ -13,5 +13,6 @@
 #include <plat/omap_hwmod.h>
 
 extern int omap2_wd_timer_disable(struct omap_hwmod *oh);
+extern int omap2_wd_timer_reset(struct omap_hwmod *oh);
 
 #endif
diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
index 6604fc6ca58a..0673f0c10432 100644
--- a/arch/arm/mach-orion5x/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -86,7 +86,6 @@ config MACH_WRT350N_V2
 
 config MACH_TS78XX
 	bool "Technologic Systems TS-78xx"
-	select PM
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Technologic Systems TS-78xx platform.
diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c
index 3638e5c12b7e..eaac83d1df6f 100644
--- a/arch/arm/mach-orion5x/addr-map.c
+++ b/arch/arm/mach-orion5x/addr-map.c
@@ -76,7 +76,7 @@ static int __init cpu_win_can_remap(const struct orion_addr_map_cfg *cfg,
 /*
  * Description of the windows needed by the platform code
  */
-static struct __initdata orion_addr_map_cfg addr_map_cfg = {
+static struct orion_addr_map_cfg addr_map_cfg __initdata = {
 	.num_wins = 8,
 	.cpu_win_can_remap = cpu_win_can_remap,
 	.bridge_virt_base = ORION5X_BRIDGE_VIRT_BASE,
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index 24481666d2cd..9148b229d0de 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -18,6 +18,7 @@
 #include <linux/mv643xx_i2c.h>
 #include <linux/ata_platform.h>
 #include <linux/delay.h>
+#include <linux/clk-provider.h>
 #include <net/dsa.h>
 #include <asm/page.h>
 #include <asm/setup.h>
@@ -70,6 +71,19 @@ void __init orion5x_map_io(void)
 
 
 /*****************************************************************************
+ * CLK tree
+ ****************************************************************************/
+static struct clk *tclk;
+
+static void __init clk_init(void)
+{
+	tclk = clk_register_fixed_rate(NULL, "tclk", NULL, CLK_IS_ROOT,
+				       orion5x_tclk);
+
+	orion_clkdev_init(tclk);
+}
+
+/*****************************************************************************
  * EHCI0
  ****************************************************************************/
 void __init orion5x_ehci0_init(void)
@@ -95,7 +109,7 @@ void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data)
 {
 	orion_ge00_init(eth_data,
 			ORION5X_ETH_PHYS_BASE, IRQ_ORION5X_ETH_SUM,
-			IRQ_ORION5X_ETH_ERR, orion5x_tclk);
+			IRQ_ORION5X_ETH_ERR);
 }
 
 
@@ -132,7 +146,7 @@ void __init orion5x_sata_init(struct mv_sata_platform_data *sata_data)
  ****************************************************************************/
 void __init orion5x_spi_init()
 {
-	orion_spi_init(SPI_PHYS_BASE, orion5x_tclk);
+	orion_spi_init(SPI_PHYS_BASE);
 }
 
 
@@ -142,7 +156,7 @@ void __init orion5x_spi_init()
 void __init orion5x_uart0_init(void)
 {
 	orion_uart0_init(UART0_VIRT_BASE, UART0_PHYS_BASE,
-			 IRQ_ORION5X_UART0, orion5x_tclk);
+			 IRQ_ORION5X_UART0, tclk);
 }
 
 /*****************************************************************************
@@ -151,7 +165,7 @@ void __init orion5x_uart0_init(void)
 void __init orion5x_uart1_init(void)
 {
 	orion_uart1_init(UART1_VIRT_BASE, UART1_PHYS_BASE,
-			 IRQ_ORION5X_UART1, orion5x_tclk);
+			 IRQ_ORION5X_UART1, tclk);
 }
 
 /*****************************************************************************
@@ -179,7 +193,7 @@ static void __init orion5x_crypto_init(void)
  ****************************************************************************/
 void __init orion5x_wdt_init(void)
 {
-	orion_wdt_init(orion5x_tclk);
+	orion_wdt_init();
 }
 
 
@@ -205,7 +219,7 @@ int __init orion5x_find_tclk(void)
 	return 166666667;
 }
 
-static void orion5x_timer_init(void)
+static void __init orion5x_timer_init(void)
 {
 	orion5x_tclk = orion5x_find_tclk();
 
@@ -276,6 +290,9 @@ void __init orion5x_init(void)
 	 */
 	orion5x_setup_cpu_mbus_bridge();
 
+	/* Setup root of clk tree */
+	clk_init();
+
 	/*
 	 * Don't issue "Wait for Interrupt" instruction if we are
 	 * running on D0 5281 silicon.
diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h
index 2e6454c8d4ba..31bab92ce038 100644
--- a/arch/arm/mach-orion5x/common.h
+++ b/arch/arm/mach-orion5x/common.h
@@ -45,6 +45,7 @@ void orion5x_restart(char, const char *);
  */
 struct pci_bus;
 struct pci_sys_data;
+struct pci_dev;
 
 void orion5x_pcie_id(u32 *dev, u32 *rev);
 void orion5x_pci_disable(void);
diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c
index e52108c9aaea..49a3fd630313 100644
--- a/arch/arm/mach-orion5x/db88f5281-setup.c
+++ b/arch/arm/mach-orion5x/db88f5281-setup.c
@@ -265,7 +265,6 @@ static int __init db88f5281_pci_map_irq(const struct pci_dev *dev, u8 slot,
 static struct hw_pci db88f5281_pci __initdata = {
 	.nr_controllers	= 2,
 	.preinit	= db88f5281_pci_preinit,
-	.swizzle	= pci_std_swizzle,
 	.setup		= orion5x_pci_sys_setup,
 	.scan		= orion5x_pci_sys_scan_bus,
 	.map_irq	= db88f5281_pci_map_irq,
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index c3ed15b8ea25..d470864b4e42 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -86,7 +86,6 @@ static int __init dns323_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 
 static struct hw_pci dns323_pci __initdata = {
 	.nr_controllers = 2,
-	.swizzle	= pci_std_swizzle,
 	.setup		= orion5x_pci_sys_setup,
 	.scan		= orion5x_pci_sys_scan_bus,
 	.map_irq	= dns323_pci_map_irq,
@@ -253,27 +252,6 @@ error_fail:
  * GPIO LEDs (simple - doesn't use hardware blinking support)
  */
 
-#define ORION_BLINK_HALF_PERIOD 100 /* ms */
-
-static int dns323_gpio_blink_set(unsigned gpio, int state,
-	unsigned long *delay_on, unsigned long *delay_off)
-{
-
-	if (delay_on && delay_off && !*delay_on && !*delay_off)
-		*delay_on = *delay_off = ORION_BLINK_HALF_PERIOD;
-
-	switch(state) {
-	case GPIO_LED_NO_BLINK_LOW:
-	case GPIO_LED_NO_BLINK_HIGH:
-		orion_gpio_set_blink(gpio, 0);
-		gpio_set_value(gpio, state);
-		break;
-	case GPIO_LED_BLINK:
-		orion_gpio_set_blink(gpio, 1);
-	}
-	return 0;
-}
-
 static struct gpio_led dns323ab_leds[] = {
 	{
 		.name = "power:blue",
@@ -312,13 +290,13 @@ static struct gpio_led dns323c_leds[] = {
 static struct gpio_led_platform_data dns323ab_led_data = {
 	.num_leds	= ARRAY_SIZE(dns323ab_leds),
 	.leds		= dns323ab_leds,
-	.gpio_blink_set = dns323_gpio_blink_set,
+	.gpio_blink_set = orion_gpio_led_blink_set,
 };
 
 static struct gpio_led_platform_data dns323c_led_data = {
 	.num_leds	= ARRAY_SIZE(dns323c_leds),
 	.leds		= dns323c_leds,
-	.gpio_blink_set = dns323_gpio_blink_set,
+	.gpio_blink_set = orion_gpio_led_blink_set,
 };
 
 static struct platform_device dns323_gpio_leds = {
diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
index 47587b832842..1e458efafb9a 100644
--- a/arch/arm/mach-orion5x/kurobox_pro-setup.c
+++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -138,7 +138,6 @@ static int __init kurobox_pro_pci_map_irq(const struct pci_dev *dev, u8 slot,
 
 static struct hw_pci kurobox_pro_pci __initdata = {
 	.nr_controllers	= 2,
-	.swizzle	= pci_std_swizzle,
 	.setup		= orion5x_pci_sys_setup,
 	.scan		= orion5x_pci_sys_scan_bus,
 	.map_irq	= kurobox_pro_pci_map_irq,
diff --git a/arch/arm/mach-orion5x/mpp.h b/arch/arm/mach-orion5x/mpp.h
index eac68978a2c2..db70e79a1198 100644
--- a/arch/arm/mach-orion5x/mpp.h
+++ b/arch/arm/mach-orion5x/mpp.h
@@ -65,8 +65,8 @@
 #define MPP8_GIGE               MPP(8,  0x1, 0, 0, 1,   1,   1)
 
 #define MPP9_UNUSED		MPP(9,  0x0, 0, 0, 1,   1,   1)
-#define MPP9_GPIO		MPP(9,  0x0, 0, 0, 1,   1,   1)
-#define MPP9_GIGE               MPP(9,  0x1, 1, 1, 1,   1,   1)
+#define MPP9_GPIO		MPP(9,  0x0, 1, 1, 1,   1,   1)
+#define MPP9_GIGE               MPP(9,  0x1, 0, 0, 1,   1,   1)
 
 #define MPP10_UNUSED		MPP(10, 0x0, 0, 0, 1,   1,   1)
 #define MPP10_GPIO		MPP(10, 0x0, 1, 1, 1,   1,   1)
diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c
index 65faaa34de61..1c16d045333e 100644
--- a/arch/arm/mach-orion5x/mss2-setup.c
+++ b/arch/arm/mach-orion5x/mss2-setup.c
@@ -89,7 +89,6 @@ static int __init mss2_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 
 static struct hw_pci mss2_pci __initdata = {
 	.nr_controllers = 2,
-	.swizzle	= pci_std_swizzle,
 	.setup		= orion5x_pci_sys_setup,
 	.scan		= orion5x_pci_sys_scan_bus,
 	.map_irq	= mss2_pci_map_irq,
diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
index 292038fc59fd..78a6a11d8216 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
@@ -149,7 +149,6 @@ rd88f5181l_fxo_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 
 static struct hw_pci rd88f5181l_fxo_pci __initdata = {
 	.nr_controllers	= 2,
-	.swizzle	= pci_std_swizzle,
 	.setup		= orion5x_pci_sys_setup,
 	.scan		= orion5x_pci_sys_scan_bus,
 	.map_irq	= rd88f5181l_fxo_pci_map_irq,
diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
index c44eabaabc16..2f5dc54cd4cd 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
@@ -161,7 +161,6 @@ rd88f5181l_ge_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 
 static struct hw_pci rd88f5181l_ge_pci __initdata = {
 	.nr_controllers	= 2,
-	.swizzle	= pci_std_swizzle,
 	.setup		= orion5x_pci_sys_setup,
 	.scan		= orion5x_pci_sys_scan_bus,
 	.map_irq	= rd88f5181l_ge_pci_map_irq,
diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c
index e3ce61711478..399130fac0b6 100644
--- a/arch/arm/mach-orion5x/rd88f5182-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5182-setup.c
@@ -200,7 +200,6 @@ static int __init rd88f5182_pci_map_irq(const struct pci_dev *dev, u8 slot,
 static struct hw_pci rd88f5182_pci __initdata = {
 	.nr_controllers	= 2,
 	.preinit	= rd88f5182_pci_preinit,
-	.swizzle	= pci_std_swizzle,
 	.setup		= orion5x_pci_sys_setup,
 	.scan		= orion5x_pci_sys_scan_bus,
 	.map_irq	= rd88f5182_pci_map_irq,
diff --git a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
index 2c5fab00d205..92df49c1b62a 100644
--- a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
@@ -16,7 +16,6 @@
 #include <linux/mtd/physmap.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/spi/spi.h>
-#include <linux/spi/orion_spi.h>
 #include <linux/spi/flash.h>
 #include <linux/ethtool.h>
 #include <net/dsa.h>
@@ -102,7 +101,6 @@ static void __init rd88f6183ap_ge_init(void)
 
 static struct hw_pci rd88f6183ap_ge_pci __initdata = {
 	.nr_controllers	= 2,
-	.swizzle	= pci_std_swizzle,
 	.setup		= orion5x_pci_sys_setup,
 	.scan		= orion5x_pci_sys_scan_bus,
 	.map_irq	= orion5x_pci_map_irq,
diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c
index 632a861ef82b..90e571dc4deb 100644
--- a/arch/arm/mach-orion5x/terastation_pro2-setup.c
+++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c
@@ -122,7 +122,6 @@ static int __init tsp2_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 static struct hw_pci tsp2_pci __initdata = {
 	.nr_controllers = 2,
 	.preinit        = tsp2_pci_preinit,
-	.swizzle        = pci_std_swizzle,
 	.setup          = orion5x_pci_sys_setup,
 	.scan           = orion5x_pci_sys_scan_bus,
 	.map_irq        = tsp2_pci_map_irq,
diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
index 5d6408745582..b184f680e0db 100644
--- a/arch/arm/mach-orion5x/ts209-setup.c
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -170,7 +170,6 @@ static int __init qnap_ts209_pci_map_irq(const struct pci_dev *dev, u8 slot,
 static struct hw_pci qnap_ts209_pci __initdata = {
 	.nr_controllers	= 2,
 	.preinit	= qnap_ts209_pci_preinit,
-	.swizzle	= pci_std_swizzle,
 	.setup		= orion5x_pci_sys_setup,
 	.scan		= orion5x_pci_sys_scan_bus,
 	.map_irq	= qnap_ts209_pci_map_irq,
diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c
index 4e6ff759cd32..a5c2e64c4ece 100644
--- a/arch/arm/mach-orion5x/ts409-setup.c
+++ b/arch/arm/mach-orion5x/ts409-setup.c
@@ -140,7 +140,6 @@ static int __init qnap_ts409_pci_map_irq(const struct pci_dev *dev, u8 slot,
 
 static struct hw_pci qnap_ts409_pci __initdata = {
 	.nr_controllers	= 2,
-	.swizzle	= pci_std_swizzle,
 	.setup		= orion5x_pci_sys_setup,
 	.scan		= orion5x_pci_sys_scan_bus,
 	.map_irq	= qnap_ts409_pci_map_irq,
diff --git a/arch/arm/mach-orion5x/ts78xx-fpga.h b/arch/arm/mach-orion5x/ts78xx-fpga.h
index 151e89e1e676..97c393d39ae2 100644
--- a/arch/arm/mach-orion5x/ts78xx-fpga.h
+++ b/arch/arm/mach-orion5x/ts78xx-fpga.h
@@ -28,9 +28,9 @@ struct fpga_device {
 
 struct fpga_devices {
 	/* Technologic Systems */
-	struct fpga_device 	ts_rtc;
-	struct fpga_device 	ts_nand;
-	struct fpga_device 	ts_rng;
+	struct fpga_device	ts_rtc;
+	struct fpga_device	ts_nand;
+	struct fpga_device	ts_rng;
 };
 
 struct ts78xx_fpga_data {
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index c96f37472eda..a74f3cf54cc5 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -8,6 +8,8 @@
  * warranty of any kind, whether express or implied.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/sysfs.h>
@@ -115,7 +117,7 @@ static struct platform_device ts78xx_ts_rtc_device = {
  * I've used the method TS use in their rtc7800.c example for the detection
  *
  * TODO: track down a guinea pig without an RTC to see if we can work out a
- * 		better RTC detection routine
+ *		better RTC detection routine
  */
 static int ts78xx_ts_rtc_load(void)
 {
@@ -141,10 +143,14 @@ static int ts78xx_ts_rtc_load(void)
 			} else
 				rc = platform_device_add(&ts78xx_ts_rtc_device);
 
+			if (rc)
+				pr_info("RTC could not be registered: %d\n",
+					rc);
 			return rc;
 		}
 	}
 
+	pr_info("RTC not found\n");
 	return -ENODEV;
 };
 
@@ -292,11 +298,8 @@ static struct platform_nand_data ts78xx_ts_nand_data = {
 	},
 };
 
-static struct resource ts78xx_ts_nand_resources = {
-	.start		= TS_NAND_DATA,
-	.end		= TS_NAND_DATA + 4,
-	.flags		= IORESOURCE_MEM,
-};
+static struct resource ts78xx_ts_nand_resources
+			= DEFINE_RES_MEM(TS_NAND_DATA, 4);
 
 static struct platform_device ts78xx_ts_nand_device = {
 	.name		= "gen_nand",
@@ -319,6 +322,8 @@ static int ts78xx_ts_nand_load(void)
 	} else
 		rc = platform_device_add(&ts78xx_ts_nand_device);
 
+	if (rc)
+		pr_info("NAND could not be registered: %d\n", rc);
 	return rc;
 };
 
@@ -332,11 +337,8 @@ static void ts78xx_ts_nand_unload(void)
  ****************************************************************************/
 #define TS_RNG_DATA	(TS78XX_FPGA_REGS_PHYS_BASE | 0x044)
 
-static struct resource ts78xx_ts_rng_resource = {
-	.flags		= IORESOURCE_MEM,
-	.start		= TS_RNG_DATA,
-	.end		= TS_RNG_DATA + 4 - 1,
-};
+static struct resource ts78xx_ts_rng_resource
+			= DEFINE_RES_MEM(TS_RNG_DATA, 4);
 
 static struct timeriomem_rng_data ts78xx_ts_rng_data = {
 	.period		= 1000000, /* one second */
@@ -363,6 +365,8 @@ static int ts78xx_ts_rng_load(void)
 	} else
 		rc = platform_device_add(&ts78xx_ts_rng_device);
 
+	if (rc)
+		pr_info("RNG could not be registered: %d\n", rc);
 	return rc;
 };
 
@@ -402,7 +406,7 @@ static void ts78xx_fpga_supports(void)
 		/* enable devices if magic matches */
 		switch ((ts78xx_fpga.id >> 8) & 0xffffff) {
 		case TS7800_FPGA_MAGIC:
-			pr_warning("TS-7800 FPGA: unrecognized revision 0x%.2x\n",
+			pr_warning("unrecognised FPGA revision 0x%.2x\n",
 					ts78xx_fpga.id & 0xff);
 			ts78xx_fpga.supports.ts_rtc.present = 1;
 			ts78xx_fpga.supports.ts_nand.present = 1;
@@ -422,26 +426,20 @@ static int ts78xx_fpga_load_devices(void)
 
 	if (ts78xx_fpga.supports.ts_rtc.present == 1) {
 		tmp = ts78xx_ts_rtc_load();
-		if (tmp) {
-			pr_info("TS-78xx: RTC not registered\n");
+		if (tmp)
 			ts78xx_fpga.supports.ts_rtc.present = 0;
-		}
 		ret |= tmp;
 	}
 	if (ts78xx_fpga.supports.ts_nand.present == 1) {
 		tmp = ts78xx_ts_nand_load();
-		if (tmp) {
-			pr_info("TS-78xx: NAND not registered\n");
+		if (tmp)
 			ts78xx_fpga.supports.ts_nand.present = 0;
-		}
 		ret |= tmp;
 	}
 	if (ts78xx_fpga.supports.ts_rng.present == 1) {
 		tmp = ts78xx_ts_rng_load();
-		if (tmp) {
-			pr_info("TS-78xx: RNG not registered\n");
+		if (tmp)
 			ts78xx_fpga.supports.ts_rng.present = 0;
-		}
 		ret |= tmp;
 	}
 
@@ -466,7 +464,7 @@ static int ts78xx_fpga_load(void)
 {
 	ts78xx_fpga.id = readl(TS78XX_FPGA_REGS_VIRT_BASE);
 
-	pr_info("TS-78xx FPGA: magic=0x%.6x, rev=0x%.2x\n",
+	pr_info("FPGA magic=0x%.6x, rev=0x%.2x\n",
 			(ts78xx_fpga.id >> 8) & 0xffffff,
 			ts78xx_fpga.id & 0xff);
 
@@ -494,7 +492,7 @@ static int ts78xx_fpga_unload(void)
 	 * UrJTAG SVN since r1381 can be used to reprogram the FPGA
 	 */
 	if (ts78xx_fpga.id != fpga_id) {
-		pr_err("TS-78xx FPGA: magic/rev mismatch\n"
+		pr_err("FPGA magic/rev mismatch\n"
 			"TS-78xx FPGA: was 0x%.6x/%.2x but now 0x%.6x/%.2x\n",
 			(ts78xx_fpga.id >> 8) & 0xffffff, ts78xx_fpga.id & 0xff,
 			(fpga_id >> 8) & 0xffffff, fpga_id & 0xff);
@@ -525,7 +523,7 @@ static ssize_t ts78xx_fpga_store(struct kobject *kobj,
 	int value, ret;
 
 	if (ts78xx_fpga.state < 0) {
-		pr_err("TS-78xx FPGA: borked, you must powercycle asap\n");
+		pr_err("FPGA borked, you must powercycle ASAP\n");
 		return -EBUSY;
 	}
 
@@ -533,10 +531,8 @@ static ssize_t ts78xx_fpga_store(struct kobject *kobj,
 		value = 1;
 	else if (strncmp(buf, "offline", sizeof("offline") - 1) == 0)
 		value = 0;
-	else {
-		pr_err("ts78xx_fpga_store: Invalid value\n");
+	else
 		return -EINVAL;
-	}
 
 	if (ts78xx_fpga.state == value)
 		return n;
@@ -614,7 +610,7 @@ static void __init ts78xx_init(void)
 	/* FPGA init */
 	ts78xx_fpga_devices_zero_init();
 	ret = ts78xx_fpga_load();
-	ret = sysfs_create_file(power_kobj, &ts78xx_fpga_attr.attr);
+	ret = sysfs_create_file(firmware_kobj, &ts78xx_fpga_attr.attr);
 	if (ret)
 		pr_err("sysfs_create_file failed: %d\n", ret);
 }
diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c
index 078c03f7cd52..754c12b6abf0 100644
--- a/arch/arm/mach-orion5x/wnr854t-setup.c
+++ b/arch/arm/mach-orion5x/wnr854t-setup.c
@@ -155,7 +155,6 @@ static int __init wnr854t_pci_map_irq(const struct pci_dev *dev, u8 slot,
 
 static struct hw_pci wnr854t_pci __initdata = {
 	.nr_controllers	= 2,
-	.swizzle	= pci_std_swizzle,
 	.setup		= orion5x_pci_sys_setup,
 	.scan		= orion5x_pci_sys_scan_bus,
 	.map_irq	= wnr854t_pci_map_irq,
diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
index 46a9778171ce..45c21251eb1e 100644
--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
@@ -243,7 +243,6 @@ static int __init wrt350n_v2_pci_map_irq(const struct pci_dev *dev, u8 slot,
 
 static struct hw_pci wrt350n_v2_pci __initdata = {
 	.nr_controllers	= 2,
-	.swizzle	= pci_std_swizzle,
 	.setup		= orion5x_pci_sys_setup,
 	.scan		= orion5x_pci_sys_scan_bus,
 	.map_irq	= wrt350n_v2_pci_map_irq,
diff --git a/arch/arm/mach-pnx4008/core.c b/arch/arm/mach-pnx4008/core.c
index be4c92858509..a00d2f1254ed 100644
--- a/arch/arm/mach-pnx4008/core.c
+++ b/arch/arm/mach-pnx4008/core.c
@@ -265,6 +265,17 @@ static void pnx4008_restart(char mode, const char *cmd)
 	soft_restart(0);
 }
 
+#ifdef CONFIG_PM
+extern int pnx4008_pm_init(void);
+#else
+static inline int pnx4008_pm_init(void) { return 0; }
+#endif
+
+void __init pnx4008_init_late(void)
+{
+	pnx4008_pm_init();
+}
+
 extern struct sys_timer pnx4008_timer;
 
 MACHINE_START(PNX4008, "Philips PNX4008")
@@ -273,6 +284,7 @@ MACHINE_START(PNX4008, "Philips PNX4008")
 	.map_io 		= pnx4008_map_io,
 	.init_irq 		= pnx4008_init_irq,
 	.init_machine 		= pnx4008_init,
+	.init_late		= pnx4008_init_late,
 	.timer 			= &pnx4008_timer,
 	.restart		= pnx4008_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pnx4008/i2c.c b/arch/arm/mach-pnx4008/i2c.c
index 8103f9644e2d..550cfc2a1f2e 100644
--- a/arch/arm/mach-pnx4008/i2c.c
+++ b/arch/arm/mach-pnx4008/i2c.c
@@ -16,48 +16,62 @@
 #include <linux/err.h>
 #include <mach/platform.h>
 #include <mach/irqs.h>
-#include <mach/i2c.h>
 
-static struct i2c_pnx_data i2c0_data = {
-	.name = I2C_CHIP_NAME "0",
-	.base = PNX4008_I2C1_BASE,
-	.irq = I2C_1_INT,
+static struct resource i2c0_resources[] = {
+	{
+		.start = PNX4008_I2C1_BASE,
+		.end = PNX4008_I2C1_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = I2C_1_INT,
+		.end = I2C_1_INT,
+		.flags = IORESOURCE_IRQ,
+	},
 };
 
-static struct i2c_pnx_data i2c1_data = {
-	.name = I2C_CHIP_NAME "1",
-	.base = PNX4008_I2C2_BASE,
-	.irq = I2C_2_INT,
+static struct resource i2c1_resources[] = {
+	{
+		.start = PNX4008_I2C2_BASE,
+		.end = PNX4008_I2C2_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = I2C_2_INT,
+		.end = I2C_2_INT,
+		.flags = IORESOURCE_IRQ,
+	},
 };
 
-static struct i2c_pnx_data i2c2_data = {
-	.name = "USB-I2C",
-	.base = (PNX4008_USB_CONFIG_BASE + 0x300),
-	.irq = USB_I2C_INT,
+static struct resource i2c2_resources[] = {
+	{
+		.start = PNX4008_USB_CONFIG_BASE + 0x300,
+		.end = PNX4008_USB_CONFIG_BASE + 0x300 + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = USB_I2C_INT,
+		.end = USB_I2C_INT,
+		.flags = IORESOURCE_IRQ,
+	},
 };
 
 static struct platform_device i2c0_device = {
-	.name = "pnx-i2c",
+	.name = "pnx-i2c.0",
 	.id = 0,
-	.dev = {
-		.platform_data = &i2c0_data,
-	},
+	.resource = i2c0_resources,
+	.num_resources = ARRAY_SIZE(i2c0_resources),
 };
 
 static struct platform_device i2c1_device = {
-	.name = "pnx-i2c",
+	.name = "pnx-i2c.1",
 	.id = 1,
-	.dev = {
-		.platform_data = &i2c1_data,
-	},
+	.resource = i2c1_resources,
+	.num_resources = ARRAY_SIZE(i2c1_resources),
 };
 
 static struct platform_device i2c2_device = {
-	.name = "pnx-i2c",
+	.name = "pnx-i2c.2",
 	.id = 2,
-	.dev = {
-		.platform_data = &i2c2_data,
-	},
+	.resource = i2c2_resources,
+	.num_resources = ARRAY_SIZE(i2c2_resources),
 };
 
 static struct platform_device *devices[] __initdata = {
diff --git a/arch/arm/mach-pnx4008/include/mach/i2c.h b/arch/arm/mach-pnx4008/include/mach/i2c.h
deleted file mode 100644
index 259ac53abf40..000000000000
--- a/arch/arm/mach-pnx4008/include/mach/i2c.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * PNX4008-specific tweaks for I2C IP3204 block
- *
- * Author: Vitaly Wool <vwool@ru.mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __ASM_ARCH_I2C_H__
-#define __ASM_ARCH_I2C_H__
-
-enum {
-	mstatus_tdi = 0x00000001,
-	mstatus_afi = 0x00000002,
-	mstatus_nai = 0x00000004,
-	mstatus_drmi = 0x00000008,
-	mstatus_active = 0x00000020,
-	mstatus_scl = 0x00000040,
-	mstatus_sda = 0x00000080,
-	mstatus_rff = 0x00000100,
-	mstatus_rfe = 0x00000200,
-	mstatus_tff = 0x00000400,
-	mstatus_tfe = 0x00000800,
-};
-
-enum {
-	mcntrl_tdie = 0x00000001,
-	mcntrl_afie = 0x00000002,
-	mcntrl_naie = 0x00000004,
-	mcntrl_drmie = 0x00000008,
-	mcntrl_daie = 0x00000020,
-	mcntrl_rffie = 0x00000040,
-	mcntrl_tffie = 0x00000080,
-	mcntrl_reset = 0x00000100,
-	mcntrl_cdbmode = 0x00000400,
-};
-
-enum {
-	rw_bit = 1 << 0,
-	start_bit = 1 << 8,
-	stop_bit = 1 << 9,
-};
-
-#define I2C_REG_RX(a)	((a)->ioaddr)		/* Rx FIFO reg (RO) */
-#define I2C_REG_TX(a)	((a)->ioaddr)		/* Tx FIFO reg (WO) */
-#define I2C_REG_STS(a)	((a)->ioaddr + 0x04)	/* Status reg (RO) */
-#define I2C_REG_CTL(a)	((a)->ioaddr + 0x08)	/* Ctl reg */
-#define I2C_REG_CKL(a)	((a)->ioaddr + 0x0c)	/* Clock divider low */
-#define I2C_REG_CKH(a)	((a)->ioaddr + 0x10)	/* Clock divider high */
-#define I2C_REG_ADR(a)	((a)->ioaddr + 0x14)	/* I2C address */
-#define I2C_REG_RFL(a)	((a)->ioaddr + 0x18)	/* Rx FIFO level (RO) */
-#define I2C_REG_TFL(a)	((a)->ioaddr + 0x1c)	/* Tx FIFO level (RO) */
-#define I2C_REG_RXB(a)	((a)->ioaddr + 0x20)	/* Num of bytes Rx-ed (RO) */
-#define I2C_REG_TXB(a)	((a)->ioaddr + 0x24)	/* Num of bytes Tx-ed (RO) */
-#define I2C_REG_TXS(a)	((a)->ioaddr + 0x28)	/* Tx slave FIFO (RO) */
-#define I2C_REG_STFL(a)	((a)->ioaddr + 0x2c)	/* Tx slave FIFO level (RO) */
-
-#define HCLK_MHZ		13
-#define I2C_CHIP_NAME		"PNX4008-I2C"
-
-#endif				/* __ASM_ARCH_I2C_H___ */
diff --git a/arch/arm/mach-pnx4008/pm.c b/arch/arm/mach-pnx4008/pm.c
index f3e60a049f98..26f8d06b142a 100644
--- a/arch/arm/mach-pnx4008/pm.c
+++ b/arch/arm/mach-pnx4008/pm.c
@@ -124,7 +124,7 @@ static const struct platform_suspend_ops pnx4008_pm_ops = {
 	.valid = pnx4008_pm_valid,
 };
 
-static int __init pnx4008_pm_init(void)
+int __init pnx4008_pm_init(void)
 {
 	u32 sram_size_to_allocate;
 
@@ -151,5 +151,3 @@ static int __init pnx4008_pm_init(void)
 	suspend_set_ops(&pnx4008_pm_ops);
 	return 0;
 }
-
-late_initcall(pnx4008_pm_init);
diff --git a/arch/arm/mach-prima2/common.h b/arch/arm/mach-prima2/common.h
index b28a930d4f8a..60d826fc2185 100644
--- a/arch/arm/mach-prima2/common.h
+++ b/arch/arm/mach-prima2/common.h
@@ -24,4 +24,10 @@ static inline void sirfsoc_map_lluart(void)  {}
 extern void __init sirfsoc_map_lluart(void);
 #endif
 
+#ifdef CONFIG_SUSPEND
+extern int sirfsoc_pm_init(void);
+#else
+static inline int sirfsoc_pm_init(void) { return 0; }
+#endif
+
 #endif
diff --git a/arch/arm/mach-prima2/irq.c b/arch/arm/mach-prima2/irq.c
index 37c2de9b6f26..a7b9415d30f8 100644
--- a/arch/arm/mach-prima2/irq.c
+++ b/arch/arm/mach-prima2/irq.c
@@ -42,7 +42,8 @@ sirfsoc_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num)
 static __init void sirfsoc_irq_init(void)
 {
 	sirfsoc_alloc_gc(sirfsoc_intc_base, 0, 32);
-	sirfsoc_alloc_gc(sirfsoc_intc_base + 4, 32, SIRFSOC_INTENAL_IRQ_END - 32);
+	sirfsoc_alloc_gc(sirfsoc_intc_base + 4, 32,
+			SIRFSOC_INTENAL_IRQ_END + 1 - 32);
 
 	writel_relaxed(0, sirfsoc_intc_base + SIRFSOC_INT_RISC_LEVEL0);
 	writel_relaxed(0, sirfsoc_intc_base + SIRFSOC_INT_RISC_LEVEL1);
@@ -68,7 +69,8 @@ void __init sirfsoc_of_irq_init(void)
 	if (!sirfsoc_intc_base)
 		panic("unable to map intc cpu registers\n");
 
-	irq_domain_add_legacy(np, 32, 0, 0, &irq_domain_simple_ops, NULL);
+	irq_domain_add_legacy(np, SIRFSOC_INTENAL_IRQ_END + 1, 0, 0,
+		&irq_domain_simple_ops, NULL);
 
 	of_node_put(np);
 
diff --git a/arch/arm/mach-prima2/pm.c b/arch/arm/mach-prima2/pm.c
index 26ebb57719df..fb5a7910af35 100644
--- a/arch/arm/mach-prima2/pm.c
+++ b/arch/arm/mach-prima2/pm.c
@@ -85,12 +85,11 @@ static const struct platform_suspend_ops sirfsoc_pm_ops = {
 	.valid = suspend_valid_only_mem,
 };
 
-static int __init sirfsoc_pm_init(void)
+int __init sirfsoc_pm_init(void)
 {
 	suspend_set_ops(&sirfsoc_pm_ops);
 	return 0;
 }
-late_initcall(sirfsoc_pm_init);
 
 static const struct of_device_id pwrc_ids[] = {
 	{ .compatible = "sirf,prima2-pwrc" },
diff --git a/arch/arm/mach-prima2/prima2.c b/arch/arm/mach-prima2/prima2.c
index 02b9c05ff990..8f0429d4b79f 100644
--- a/arch/arm/mach-prima2/prima2.c
+++ b/arch/arm/mach-prima2/prima2.c
@@ -25,6 +25,11 @@ void __init sirfsoc_mach_init(void)
 	of_platform_bus_probe(NULL, sirfsoc_of_bus_ids, NULL);
 }
 
+void __init sirfsoc_init_late(void)
+{
+	sirfsoc_pm_init();
+}
+
 static const char *prima2cb_dt_match[] __initdata = {
        "sirf,prima2-cb",
        NULL
@@ -39,6 +44,7 @@ MACHINE_START(PRIMA2_EVB, "prima2cb")
 	.timer		= &sirfsoc_timer,
 	.dma_zone_size	= SZ_256M,
 	.init_machine	= sirfsoc_mach_init,
+	.init_late	= sirfsoc_init_late,
 	.dt_compat      = prima2cb_dt_match,
 	.restart	= sirfsoc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 109ccd2a8885..fe2d1f80ef50 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -113,6 +113,7 @@ config MACH_ARMCORE
 	select IWMMXT
 	select PXA25x
 	select MIGHT_HAVE_PCI
+	select NEED_MACH_IO_H if PCI
 
 config MACH_EM_X270
 	bool "CompuLab EM-x270 platform"
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index c35456f02acb..56e8cebeb7d5 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -732,9 +732,7 @@ static inline void balloon3_nand_init(void) {}
 #if defined(CONFIG_REGULATOR_MAX1586) || \
     defined(CONFIG_REGULATOR_MAX1586_MODULE)
 static struct regulator_consumer_supply balloon3_max1587a_consumers[] = {
-	{
-		.supply	= "vcc_core",
-	}
+	REGULATOR_SUPPLY("vcc_core", NULL),
 };
 
 static struct regulator_init_data balloon3_max1587a_v3_info = {
diff --git a/arch/arm/mach-pxa/cm-x2xx-pci.c b/arch/arm/mach-pxa/cm-x2xx-pci.c
index ebd9259f5ac9..d8f816c24a2f 100644
--- a/arch/arm/mach-pxa/cm-x2xx-pci.c
+++ b/arch/arm/mach-pxa/cm-x2xx-pci.c
@@ -181,11 +181,10 @@ static void cmx2xx_pci_preinit(void)
 }
 
 static struct hw_pci cmx2xx_pci __initdata = {
-	.swizzle	= pci_std_swizzle,
 	.map_irq	= cmx2xx_pci_map_irq,
 	.nr_controllers	= 1,
+	.ops		= &it8152_ops,
 	.setup		= it8152_pci_setup,
-	.scan		= it8152_pci_scan_bus,
 	.preinit	= cmx2xx_pci_preinit,
 };
 
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index 313274016277..3e4e9fe2d462 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -713,9 +713,7 @@ struct da9030_battery_info cm_x300_battery_info = {
 };
 
 static struct regulator_consumer_supply buck2_consumers[] = {
-	{
-		.supply = "vcc_core",
-	},
+	REGULATOR_SUPPLY("vcc_core", NULL),
 };
 
 static struct regulator_init_data buck2_data = {
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 16ec557b8e43..a3a4a38d4972 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -1085,10 +1085,7 @@ static void __init em_x270_userspace_consumers_init(void)
 /* DA9030 related initializations */
 #define REGULATOR_CONSUMER(_name, _dev_name, _supply)		        \
 	static struct regulator_consumer_supply _name##_consumers[] = {	\
-		{							\
-			.dev_name = _dev_name,				\
-			.supply = _supply,				\
-		},							\
+		REGULATOR_SUPPLY(_supply, _dev_name),			\
 	}
 
 REGULATOR_CONSUMER(ldo3, "reg-userspace-consumer.0", "vcc gps");
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index b83b95a29503..d09da6a746b8 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -22,6 +22,7 @@
 #include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
+#include <linux/input/navpoint.h>
 #include <linux/lcd.h>
 #include <linux/mfd/htc-egpio.h>
 #include <linux/mfd/asic3.h>
@@ -102,6 +103,10 @@ static unsigned long hx4700_pin_config[] __initdata = {
 	GPIO44_BTUART_CTS,
 	GPIO45_BTUART_RTS_LPM_LOW,
 
+	/* STUART (IRDA) */
+	GPIO46_STUART_RXD,
+	GPIO47_STUART_TXD,
+
 	/* PWM 1 (Backlight) */
 	GPIO17_PWM1_OUT,
 
@@ -113,7 +118,7 @@ static unsigned long hx4700_pin_config[] __initdata = {
 	GPIO113_I2S_SYSCLK,
 
 	/* SSP 1 (NavPoint) */
-	GPIO23_SSP1_SCLK,
+	GPIO23_SSP1_SCLK_IN,
 	GPIO24_SSP1_SFRM,
 	GPIO25_SSP1_TXD,
 	GPIO26_SSP1_RXD,
@@ -125,10 +130,13 @@ static unsigned long hx4700_pin_config[] __initdata = {
 	GPIO88_GPIO,
 
 	/* HX4700 specific input GPIOs */
-	GPIO12_GPIO,	/* ASIC3_IRQ */
+	GPIO12_GPIO | WAKEUP_ON_EDGE_RISE,	/* ASIC3_IRQ */
 	GPIO13_GPIO,	/* W3220_IRQ */
 	GPIO14_GPIO,	/* nWLAN_IRQ */
 
+	/* HX4700 specific output GPIOs */
+	GPIO102_GPIO | MFP_LPM_DRIVE_LOW,	/* SYNAPTICS_POWER_ON */
+
 	GPIO10_GPIO,	/* GSM_IRQ */
 	GPIO13_GPIO,	/* CPLD_IRQ */
 	GPIO107_GPIO,	/* DS1WM_IRQ */
@@ -183,6 +191,23 @@ static struct platform_device gpio_keys = {
 };
 
 /*
+ * Synaptics NavPoint connected to SSP1
+ */
+
+static struct navpoint_platform_data navpoint_platform_data = {
+	.port	= 1,
+	.gpio	= GPIO102_HX4700_SYNAPTICS_POWER_ON,
+};
+
+static struct platform_device navpoint = {
+	.name	= "navpoint",
+	.id	= -1,
+	.dev = {
+		.platform_data = &navpoint_platform_data,
+	},
+};
+
+/*
  * ASIC3
  */
 
@@ -227,7 +252,6 @@ static u16 asic3_gpio_config[] = {
 	ASIC3_GPIOC0_LED0,		/* red */
 	ASIC3_GPIOC1_LED1,		/* green */
 	ASIC3_GPIOC2_LED2,		/* blue */
-	ASIC3_GPIOC4_CF_nCD,
 	ASIC3_GPIOC5_nCIOW,
 	ASIC3_GPIOC6_nCIOR,
 	ASIC3_GPIOC7_nPCE_1,
@@ -241,6 +265,7 @@ static u16 asic3_gpio_config[] = {
 	ASIC3_GPIOC15_nPIOR,
 
 	/* GPIOD: input GPIOs, CF */
+	ASIC3_GPIOD4_CF_nCD,
 	ASIC3_GPIOD11_nCIOIS16,
 	ASIC3_GPIOD12_nCWAIT,
 	ASIC3_GPIOD15_nPIOW,
@@ -291,6 +316,7 @@ static struct asic3_platform_data asic3_platform_data = {
 	.gpio_config_num = ARRAY_SIZE(asic3_gpio_config),
 	.irq_base        = IRQ_BOARD_START,
 	.gpio_base       = HX4700_ASIC3_GPIO_BASE,
+	.clock_rate      = 4000000,
 	.leds            = asic3_leds,
 };
 
@@ -680,12 +706,8 @@ static struct platform_device power_supply = {
  */
 
 static struct regulator_consumer_supply bq24022_consumers[] = {
-	{
-		.supply = "vbus_draw",
-	},
-	{
-		.supply = "ac_draw",
-	},
+	REGULATOR_SUPPLY("vbus_draw", NULL),
+	REGULATOR_SUPPLY("ac_draw", NULL),
 };
 
 static struct regulator_init_data bq24022_init_data = {
@@ -764,9 +786,8 @@ static struct platform_device strataflash = {
  * Maxim MAX1587A on PI2C
  */
 
-static struct regulator_consumer_supply max1587a_consumer = {
-	.supply = "vcc_core",
-};
+static struct regulator_consumer_supply max1587a_consumer =
+	REGULATOR_SUPPLY("vcc_core", NULL);
 
 static struct regulator_init_data max1587a_v3_info = {
 	.constraints = {
@@ -828,6 +849,7 @@ static struct platform_device audio = {
 static struct platform_device *devices[] __initdata = {
 	&asic3,
 	&gpio_keys,
+	&navpoint,
 	&backlight,
 	&w3220,
 	&hx4700_lcd,
@@ -859,6 +881,7 @@ static void __init hx4700_init(void)
 	int ret;
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(hx4700_pin_config));
+	gpio_set_wake(GPIO12_HX4700_ASIC3_IRQ, 1);
 	ret = gpio_request_array(ARRAY_AND_SIZE(global_gpios));
 	if (ret)
 		pr_err ("hx4700: Failed to request GPIOs.\n");
diff --git a/arch/arm/mach-pxa/include/mach/io.h b/arch/arm/mach-pxa/include/mach/io.h
new file mode 100644
index 000000000000..cd78b7fe3567
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/io.h
@@ -0,0 +1,17 @@
+/*
+ * arch/arm/mach-pxa/include/mach/io.h
+ *
+ * Copied from asm/arch/sa1100/io.h
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a)		__typesafe_io(a)
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
index a65867209aa0..a611ad3153c7 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
@@ -208,6 +208,7 @@
 #define GPIO113_I2S_SYSCLK	MFP_CFG_OUT(GPIO113, AF1, DRIVE_LOW)
 
 /* SSP 1 */
+#define GPIO23_SSP1_SCLK_IN	MFP_CFG_IN(GPIO23, AF2)
 #define GPIO23_SSP1_SCLK	MFP_CFG_OUT(GPIO23, AF2, DRIVE_LOW)
 #define GPIO29_SSP1_SCLK	MFP_CFG_IN(GPIO29, AF3)
 #define GPIO27_SSP1_SYSCLK	MFP_CFG_OUT(GPIO27, AF1, DRIVE_LOW)
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h b/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h
index c54cef25895c..cbf51ae81855 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h
@@ -17,6 +17,7 @@
  *
  * bit     23 - Input/Output (PXA2xx specific)
  * bit     24 - Wakeup Enable(PXA2xx specific)
+ * bit     25 - Keep Output  (PXA2xx specific)
  */
 
 #define MFP_DIR_IN		(0x0 << 23)
@@ -25,6 +26,12 @@
 #define MFP_DIR(x)		(((x) >> 23) & 0x1)
 
 #define MFP_LPM_CAN_WAKEUP	(0x1 << 24)
+
+/*
+ * MFP_LPM_KEEP_OUTPUT must be specified for pins that need to
+ * retain their last output level (low or high).
+ * Note: MFP_LPM_KEEP_OUTPUT has no effect on pins configured for input.
+ */
 #define MFP_LPM_KEEP_OUTPUT	(0x1 << 25)
 
 #define WAKEUP_ON_EDGE_RISE	(MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_RISE)
diff --git a/arch/arm/mach-pxa/include/mach/mioa701.h b/arch/arm/mach-pxa/include/mach/mioa701.h
index 02868447b0b1..e57f5c724e8a 100644
--- a/arch/arm/mach-pxa/include/mach/mioa701.h
+++ b/arch/arm/mach-pxa/include/mach/mioa701.h
@@ -61,6 +61,9 @@
 #define GPIO93_KEY_VOLUME_UP			93
 #define GPIO94_KEY_VOLUME_DOWN			94
 
+/* Camera */
+#define GPIO56_MT9M111_nOE			56
+
 extern struct input_dev *mioa701_evdev;
 extern void mioa701_gpio_lpm_set(unsigned long mfp_pin);
 
diff --git a/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h b/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
index d72791695b26..0260aaa2fc17 100644
--- a/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
+++ b/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
@@ -31,7 +31,6 @@
 #define PCM990_CTRL_INT_IRQ		PXA_GPIO_TO_IRQ(PCM990_CTRL_INT_IRQ_GPIO)
 #define PCM990_CTRL_INT_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
 #define PCM990_CTRL_PHYS		PXA_CS1_PHYS	/* 16-Bit */
-#define PCM990_CTRL_BASE		0xea000000
 #define PCM990_CTRL_SIZE		(1*1024*1024)
 
 #define PCM990_CTRL_PWR_IRQ_GPIO	14
@@ -69,13 +68,13 @@
 #define PCM990_CTRL_MMC2DE	0x0004	/* R MMC2 Card detect */
 #define PCM990_CTRL_MMC2WP	0x0008	/* R MMC2 Card write protect */
 
-#define PCM990_CTRL_REG6	0x000C	/* Interrupt Clear REGISTER */
+#define PCM990_CTRL_INTSETCLR	0x000C	/* Interrupt Clear REGISTER */
 #define PCM990_CTRL_INTC0	0x0001	/* Clear Reg BT Detect */
 #define PCM990_CTRL_INTC1	0x0002	/* Clear Reg FR RI */
 #define PCM990_CTRL_INTC2	0x0004	/* Clear Reg MMC1 Detect */
 #define PCM990_CTRL_INTC3	0x0008	/* Clear Reg PM_5V off */
 
-#define PCM990_CTRL_REG7	0x000E	/* Interrupt Enable REGISTER */
+#define PCM990_CTRL_INTMSKENA	0x000E	/* Interrupt Enable REGISTER */
 #define PCM990_CTRL_ENAINT0	0x0001	/* Enable Int BT Detect */
 #define PCM990_CTRL_ENAINT1	0x0002	/* Enable Int FR RI */
 #define PCM990_CTRL_ENAINT2	0x0004	/* Enable Int MMC1 Detect */
@@ -102,32 +101,6 @@
 #define PCM990_CTRL_ACPRES	0x0004	/* DC Present */
 #define PCM990_CTRL_ACALARM	0x0008	/* Error Akku */
 
-#define PCM990_CTRL_P2V(x)	((x) - PCM990_CTRL_PHYS + PCM990_CTRL_BASE)
-#define PCM990_CTRL_V2P(x)	((x) - PCM990_CTRL_BASE + PCM990_CTRL_PHYS)
-
-#ifndef __ASSEMBLY__
-#  define __PCM990_CTRL_REG(x) \
-		(*((volatile unsigned char *)PCM990_CTRL_P2V(x)))
-#else
-#  define __PCM990_CTRL_REG(x)	PCM990_CTRL_P2V(x)
-#endif
-
-#define PCM990_INTMSKENA __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG7)
-#define PCM990_INTSETCLR __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG6)
-#define PCM990_CTRL0	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG0)
-#define PCM990_CTRL1	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG1)
-#define PCM990_CTRL2	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG2)
-#define PCM990_CTRL3	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG3)
-#define PCM990_CTRL4	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG4)
-#define PCM990_CTRL5	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG5)
-#define PCM990_CTRL6	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG6)
-#define PCM990_CTRL7	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG7)
-#define PCM990_CTRL8	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG8)
-#define PCM990_CTRL9	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG9)
-#define PCM990_CTRL10	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG10)
-#define PCM990_CTRL11	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG11)
-
-
 /*
  * IDE
  */
@@ -166,24 +139,6 @@
 #define PCM990_IDE_PLD_P2V(x) ((x) - PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_BASE)
 #define PCM990_IDE_PLD_V2P(x) ((x) - PCM990_IDE_PLD_BASE + PCM990_IDE_PLD_PHYS)
 
-#ifndef __ASSEMBLY__
-# define  __PCM990_IDE_PLD_REG(x) \
-	(*((volatile unsigned char *)PCM990_IDE_PLD_P2V(x)))
-#else
-# define  __PCM990_IDE_PLD_REG(x)	PCM990_IDE_PLD_P2V(x)
-#endif
-
-#define PCM990_IDE0 \
-	__PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG0)
-#define PCM990_IDE1 \
-	__PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG1)
-#define PCM990_IDE2 \
-	__PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG2)
-#define PCM990_IDE3 \
-	__PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG3)
-#define PCM990_IDE4 \
-	__PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG4)
-
 /*
  * Compact Flash
  */
@@ -196,10 +151,6 @@
 #define PCM990_CF_CD_EDGE	IRQ_TYPE_EDGE_RISING
 
 #define PCM990_CF_PLD_PHYS	0x30000000	/* 16 bit wide */
-#define PCM990_CF_PLD_BASE	0xef000000
-#define PCM990_CF_PLD_SIZE	(1*1024*1024)
-#define PCM990_CF_PLD_P2V(x)	((x) - PCM990_CF_PLD_PHYS + PCM990_CF_PLD_BASE)
-#define PCM990_CF_PLD_V2P(x)	((x) - PCM990_CF_PLD_BASE + PCM990_CF_PLD_PHYS)
 
 /* visible CPLD (U6) registers */
 #define PCM990_CF_PLD_REG0	0x1000	/* OFFSET CF REGISTER 0 */
@@ -239,21 +190,6 @@
 #define PCM990_CF_REG6_CD1	0x0001	/* R CF Card_Detect1 */
 #define PCM990_CF_REG6_CD2	0x0002	/* R CF Card_Detect2 */
 
-#ifndef __ASSEMBLY__
-#  define  __PCM990_CF_PLD_REG(x) \
-	(*((volatile unsigned char *)PCM990_CF_PLD_P2V(x)))
-#else
-#  define  __PCM990_CF_PLD_REG(x)	PCM990_CF_PLD_P2V(x)
-#endif
-
-#define PCM990_CF0 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG0)
-#define PCM990_CF1 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG1)
-#define PCM990_CF2 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG2)
-#define PCM990_CF3 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG3)
-#define PCM990_CF4 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG4)
-#define PCM990_CF5 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG5)
-#define PCM990_CF6 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG6)
-
 /*
  * Wolfson AC97 Touch
  */
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 8de0651d7efb..2db697cd2b4e 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -579,12 +579,8 @@ static struct platform_device power_supply = {
  */
 
 static struct regulator_consumer_supply bq24022_consumers[] = {
-	{
-		.supply = "vbus_draw",
-	},
-	{
-		.supply = "ac_draw",
-	},
+	REGULATOR_SUPPLY("vbus_draw", NULL),
+	REGULATOR_SUPPLY("ac_draw", NULL),
 };
 
 static struct regulator_init_data bq24022_init_data = {
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
index b0a842887780..ef0426a159d4 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -33,6 +33,8 @@
 #define BANK_OFF(n)	(((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
 #define GPLR(x)		__REG2(0x40E00000, BANK_OFF((x) >> 5))
 #define GPDR(x)		__REG2(0x40E00000, BANK_OFF((x) >> 5) + 0x0c)
+#define GPSR(x)		__REG2(0x40E00000, BANK_OFF((x) >> 5) + 0x18)
+#define GPCR(x)		__REG2(0x40E00000, BANK_OFF((x) >> 5) + 0x24)
 
 #define PWER_WE35	(1 << 24)
 
@@ -348,6 +350,7 @@ static inline void pxa27x_mfp_init(void) {}
 #ifdef CONFIG_PM
 static unsigned long saved_gafr[2][4];
 static unsigned long saved_gpdr[4];
+static unsigned long saved_gplr[4];
 static unsigned long saved_pgsr[4];
 
 static int pxa2xx_mfp_suspend(void)
@@ -366,14 +369,26 @@ static int pxa2xx_mfp_suspend(void)
 	}
 
 	for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++) {
-
 		saved_gafr[0][i] = GAFR_L(i);
 		saved_gafr[1][i] = GAFR_U(i);
 		saved_gpdr[i] = GPDR(i * 32);
+		saved_gplr[i] = GPLR(i * 32);
 		saved_pgsr[i] = PGSR(i);
 
-		GPDR(i * 32) = gpdr_lpm[i];
+		GPSR(i * 32) = PGSR(i);
+		GPCR(i * 32) = ~PGSR(i);
+	}
+
+	/* set GPDR bits taking into account MFP_LPM_KEEP_OUTPUT */
+	for (i = 0; i < pxa_last_gpio; i++) {
+		if ((gpdr_lpm[gpio_to_bank(i)] & GPIO_bit(i)) ||
+		    ((gpio_desc[i].config & MFP_LPM_KEEP_OUTPUT) &&
+		     (saved_gpdr[gpio_to_bank(i)] & GPIO_bit(i))))
+			GPDR(i) |= GPIO_bit(i);
+		else
+			GPDR(i) &= ~GPIO_bit(i);
 	}
+
 	return 0;
 }
 
@@ -384,6 +399,8 @@ static void pxa2xx_mfp_resume(void)
 	for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++) {
 		GAFR_L(i) = saved_gafr[0][i];
 		GAFR_U(i) = saved_gafr[1][i];
+		GPSR(i * 32) = saved_gplr[i];
+		GPCR(i * 32) = ~saved_gplr[i];
 		GPDR(i * 32) = saved_gpdr[i];
 		PGSR(i) = saved_pgsr[i];
 	}
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 061d57009cee..bf99022b021f 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -103,6 +103,7 @@ static unsigned long mioa701_pin_config[] = {
 	GPIO82_CIF_DD_5,
 	GPIO84_CIF_FV,
 	GPIO85_CIF_LV,
+	MIO_CFG_OUT(GPIO56_MT9M111_nOE, AF0, DRIVE_LOW),
 
 	/* Bluetooth */
 	MIO_CFG_IN(GPIO14_BT_nACTIVITY, AF0),
@@ -581,9 +582,7 @@ static struct wm97xx_pdata mioa701_wm97xx_pdata = {
  * Voltage regulation
  */
 static struct regulator_consumer_supply max1586_consumers[] = {
-	{
-		.supply = "vcc_core",
-	}
+	REGULATOR_SUPPLY("vcc_core", NULL),
 };
 
 static struct regulator_init_data max1586_v3_info = {
@@ -705,6 +704,7 @@ static struct gpio global_gpios[] = {
 	{ GPIO9_CHARGE_EN, GPIOF_OUT_INIT_HIGH, "Charger enable" },
 	{ GPIO18_POWEROFF, GPIOF_OUT_INIT_LOW, "Power Off" },
 	{ GPIO87_LCD_POWER, GPIOF_OUT_INIT_LOW, "LCD Power" },
+	{ GPIO56_MT9M111_nOE, GPIOF_OUT_INIT_LOW, "Camera nOE" },
 };
 
 static void __init mioa701_machine_init(void)
diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c
index fbc10d7b95d1..dad71cfa34c8 100644
--- a/arch/arm/mach-pxa/palm27x.c
+++ b/arch/arm/mach-pxa/palm27x.c
@@ -429,9 +429,7 @@ void __init palm27x_power_init(int ac, int usb)
 #if defined(CONFIG_REGULATOR_MAX1586) || \
     defined(CONFIG_REGULATOR_MAX1586_MODULE)
 static struct regulator_consumer_supply palm27x_max1587a_consumers[] = {
-	{
-		.supply	= "vcc_core",
-	}
+	REGULATOR_SUPPLY("vcc_core", NULL),
 };
 
 static struct regulator_init_data palm27x_max1587a_v3_info = {
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index abab4e2b122c..cb723e84bc27 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -65,6 +65,18 @@ static unsigned long pcm990_pin_config[] __initdata = {
 	GPIO31_AC97_SYNC,
 };
 
+static void __iomem *pcm990_cpld_base;
+
+static u8 pcm990_cpld_readb(unsigned int reg)
+{
+	return readb(pcm990_cpld_base + reg);
+}
+
+static void pcm990_cpld_writeb(u8 value, unsigned int reg)
+{
+	writeb(value, pcm990_cpld_base + reg);
+}
+
 /*
  * pcm990_lcd_power - control power supply to the LCD
  * @on: 0 = switch off, 1 = switch on
@@ -78,13 +90,13 @@ static void pcm990_lcd_power(int on, struct fb_var_screeninfo *var)
 		/* enable LCD-Latches
 		 * power on LCD
 		 */
-		__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG3) =
-			PCM990_CTRL_LCDPWR + PCM990_CTRL_LCDON;
+		pcm990_cpld_writeb(PCM990_CTRL_LCDPWR + PCM990_CTRL_LCDON,
+				PCM990_CTRL_REG3);
 	} else {
 		/* disable LCD-Latches
 		 * power off LCD
 		 */
-		__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG3) = 0x00;
+		pcm990_cpld_writeb(0, PCM990_CTRL_REG3);
 	}
 }
 #endif
@@ -243,15 +255,26 @@ static unsigned long pcm990_irq_enabled;
 static void pcm990_mask_ack_irq(struct irq_data *d)
 {
 	int pcm990_irq = (d->irq - PCM027_IRQ(0));
-	PCM990_INTMSKENA = (pcm990_irq_enabled &= ~(1 << pcm990_irq));
+
+	pcm990_irq_enabled &= ~(1 << pcm990_irq);
+
+	pcm990_cpld_writeb(pcm990_irq_enabled, PCM990_CTRL_INTMSKENA);
 }
 
 static void pcm990_unmask_irq(struct irq_data *d)
 {
 	int pcm990_irq = (d->irq - PCM027_IRQ(0));
+	u8 val;
+
 	/* the irq can be acknowledged only if deasserted, so it's done here */
-	PCM990_INTSETCLR |= 1 << pcm990_irq;
-	PCM990_INTMSKENA  = (pcm990_irq_enabled |= (1 << pcm990_irq));
+
+	pcm990_irq_enabled |= (1 << pcm990_irq);
+
+	val = pcm990_cpld_readb(PCM990_CTRL_INTSETCLR);
+	val |= 1 << pcm990_irq;
+	pcm990_cpld_writeb(val, PCM990_CTRL_INTSETCLR);
+
+	pcm990_cpld_writeb(pcm990_irq_enabled, PCM990_CTRL_INTMSKENA);
 }
 
 static struct irq_chip pcm990_irq_chip = {
@@ -261,7 +284,10 @@ static struct irq_chip pcm990_irq_chip = {
 
 static void pcm990_irq_handler(unsigned int irq, struct irq_desc *desc)
 {
-	unsigned long pending = (~PCM990_INTSETCLR) & pcm990_irq_enabled;
+	unsigned long pending;
+
+	pending = ~pcm990_cpld_readb(PCM990_CTRL_INTSETCLR);
+	pending &= pcm990_irq_enabled;
 
 	do {
 		/* clear our parent IRQ */
@@ -270,7 +296,8 @@ static void pcm990_irq_handler(unsigned int irq, struct irq_desc *desc)
 			irq = PCM027_IRQ(0) + __ffs(pending);
 			generic_handle_irq(irq);
 		}
-		pending = (~PCM990_INTSETCLR) & pcm990_irq_enabled;
+		pending = ~pcm990_cpld_readb(PCM990_CTRL_INTSETCLR);
+		pending &= pcm990_irq_enabled;
 	} while (pending);
 }
 
@@ -285,8 +312,9 @@ static void __init pcm990_init_irq(void)
 		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 	}
 
-	PCM990_INTMSKENA = 0x00;	/* disable all Interrupts */
-	PCM990_INTSETCLR = 0xFF;
+	/* disable all Interrupts */
+	pcm990_cpld_writeb(0x0, PCM990_CTRL_INTMSKENA);
+	pcm990_cpld_writeb(0xff, PCM990_CTRL_INTSETCLR);
 
 	irq_set_chained_handler(PCM990_CTRL_INT_IRQ, pcm990_irq_handler);
 	irq_set_irq_type(PCM990_CTRL_INT_IRQ, PCM990_CTRL_INT_IRQ_EDGE);
@@ -309,13 +337,16 @@ static int pcm990_mci_init(struct device *dev, irq_handler_t mci_detect_int,
 static void pcm990_mci_setpower(struct device *dev, unsigned int vdd)
 {
 	struct pxamci_platform_data *p_d = dev->platform_data;
+	u8 val;
+
+	val = pcm990_cpld_readb(PCM990_CTRL_REG5);
 
 	if ((1 << vdd) & p_d->ocr_mask)
-		__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG5) =
-						PCM990_CTRL_MMC2PWR;
+		val |= PCM990_CTRL_MMC2PWR;
 	else
-		__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG5) =
-						~PCM990_CTRL_MMC2PWR;
+		val &= ~PCM990_CTRL_MMC2PWR;
+
+	pcm990_cpld_writeb(PCM990_CTRL_MMC2PWR, PCM990_CTRL_REG5);
 }
 
 static void pcm990_mci_exit(struct device *dev, void *data)
@@ -481,23 +512,6 @@ static struct platform_device pcm990_camera[] = {
 #endif /* CONFIG_VIDEO_PXA27x ||CONFIG_VIDEO_PXA27x_MODULE */
 
 /*
- * enable generic access to the base board control CPLDs U6 and U7
- */
-static struct map_desc pcm990_io_desc[] __initdata = {
-	{
-		.virtual	= PCM990_CTRL_BASE,
-		.pfn		= __phys_to_pfn(PCM990_CTRL_PHYS),
-		.length		= PCM990_CTRL_SIZE,
-		.type		= MT_DEVICE	/* CPLD */
-	}, {
-		.virtual	= PCM990_CF_PLD_BASE,
-		.pfn		= __phys_to_pfn(PCM990_CF_PLD_PHYS),
-		.length		= PCM990_CF_PLD_SIZE,
-		.type		= MT_DEVICE	/* CPLD */
-	}
-};
-
-/*
  * system init for baseboard usage. Will be called by pcm027 init.
  *
  * Add platform devices present on this baseboard and init
@@ -507,8 +521,11 @@ void __init pcm990_baseboard_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_pin_config));
 
-	/* register CPLD access */
-	iotable_init(ARRAY_AND_SIZE(pcm990_io_desc));
+	pcm990_cpld_base = ioremap(PCM990_CTRL_PHYS, PCM990_CTRL_SIZE);
+	if (!pcm990_cpld_base) {
+		pr_err("pcm990: failed to ioremap cpld\n");
+		return;
+	}
 
 	/* register CPLD's IRQ controller */
 	pcm990_init_irq();
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 6bce78edce7a..4726c246dcdc 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -421,8 +421,11 @@ void __init pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info)
 	pxa_register_device(&pxa27x_device_i2c_power, info);
 }
 
+static struct pxa_gpio_platform_data pxa27x_gpio_info __initdata = {
+	.gpio_set_wake = gpio_set_wake,
+};
+
 static struct platform_device *devices[] __initdata = {
-	&pxa_device_gpio,
 	&pxa27x_device_udc,
 	&pxa_device_pmu,
 	&pxa_device_i2s,
@@ -458,6 +461,7 @@ static int __init pxa27x_init(void)
 		register_syscore_ops(&pxa2xx_mfp_syscore_ops);
 		register_syscore_ops(&pxa2xx_clock_syscore_ops);
 
+		pxa_register_device(&pxa_device_gpio, &pxa27x_gpio_info);
 		ret = platform_add_devices(devices, ARRAY_SIZE(devices));
 	}
 
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index df2ab0fb2ace..363d91b44ecb 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -877,9 +877,7 @@ static struct i2c_board_info spitz_i2c_devs[] = {
 };
 
 static struct regulator_consumer_supply isl6271a_consumers[] = {
-	{
-		.supply	= "vcc_core",
-	}
+	REGULATOR_SUPPLY("vcc_core", NULL),
 };
 
 static struct regulator_init_data isl6271a_info[] = {
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index 4cd645e29b64..30b1b0b3c7f7 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -151,10 +151,7 @@ static struct platform_device sht15 = {
 };
 
 static struct regulator_consumer_supply stargate2_sensor_3_con[] = {
-	{
-		.dev_name = "sht15",
-		.supply = "vcc",
-	},
+	REGULATOR_SUPPLY("vcc", "sht15"),
 };
 
 enum stargate2_ldos{
diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
index c57ab636ea9c..e1740acd15f1 100644
--- a/arch/arm/mach-pxa/vpac270.c
+++ b/arch/arm/mach-pxa/vpac270.c
@@ -640,9 +640,7 @@ static inline void vpac270_ide_init(void) {}
 #if defined(CONFIG_REGULATOR_MAX1586) || \
     defined(CONFIG_REGULATOR_MAX1586_MODULE)
 static struct regulator_consumer_supply vpac270_max1587a_consumers[] = {
-	{
-		.supply	= "vcc_core",
-	}
+	REGULATOR_SUPPLY("vcc_core", NULL),
 };
 
 static struct regulator_init_data vpac270_max1587a_v3_info = {
diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index fa8619970841..b9320cb8a11f 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -615,9 +615,7 @@ static inline void z2_spi_init(void) {}
 #if defined(CONFIG_REGULATOR_TPS65023) || \
 	defined(CONFIG_REGULATOR_TPS65023_MODULE)
 static struct regulator_consumer_supply z2_tps65021_consumers[] = {
-	{
-		.supply	= "vcc_core",
-	}
+	REGULATOR_SUPPLY("vcc_core", NULL),
 };
 
 static struct regulator_init_data z2_tps65021_info[] = {
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 0f3a327ebcaa..e24961109b70 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -111,10 +111,6 @@ config S3C24XX_SETUP_TS
 	help
 	  Compile in platform device definition for Samsung TouchScreen.
 
-# cpu-specific sections
-
-if CPU_S3C2410
-
 config S3C2410_DMA
 	bool
 	depends on S3C24XX_DMA && (CPU_S3C2410 || CPU_S3C2442)
@@ -127,6 +123,10 @@ config S3C2410_PM
 	help
 	  Power Management code common to S3C2410 and better
 
+# cpu-specific sections
+
+if CPU_S3C2410
+
 config S3C24XX_SIMTEC_NOR
 	bool
 	help
@@ -518,6 +518,11 @@ config S3C2443_DMA
 	help
 	  Internal config node for S3C2443 DMA support
 
+config S3C2443_SETUP_SPI
+	bool
+	help
+	  Common setup code for SPI GPIO configurations
+
 endif	# CPU_S3C2443 || CPU_S3C2416
 
 if CPU_S3C2443
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index 3518fe812d5f..0ab6ab15da4c 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -14,6 +14,8 @@ obj-				:=
 
 # core
 
+obj-y				+= common.o
+
 obj-$(CONFIG_CPU_S3C2410)	+= s3c2410.o
 obj-$(CONFIG_S3C2410_DMA)	+= dma-s3c2410.o
 obj-$(CONFIG_S3C2410_PM)	+= pm-s3c2410.o sleep-s3c2410.o
@@ -33,6 +35,10 @@ obj-$(CONFIG_S3C2440_DMA)	+= dma-s3c2440.o
 
 obj-$(CONFIG_CPU_S3C2443)	+= s3c2443.o irq-s3c2443.o clock-s3c2443.o
 
+# PM
+
+obj-$(CONFIG_PM)		+= pm.o irq-pm.o sleep.o
+
 # common code
 
 obj-$(CONFIG_S3C2443_COMMON)	+= common-s3c2443.o
@@ -91,5 +97,6 @@ obj-$(CONFIG_MACH_OSIRIS_DVS)		+= mach-osiris-dvs.o
 # device setup
 
 obj-$(CONFIG_S3C2416_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
+obj-$(CONFIG_S3C2443_SETUP_SPI)		+= setup-spi.o
 obj-$(CONFIG_ARCH_S3C24XX)		+= setup-i2c.o
 obj-$(CONFIG_S3C24XX_SETUP_TS)		+= setup-ts.o
diff --git a/arch/arm/mach-s3c24xx/bast-ide.c b/arch/arm/mach-s3c24xx/bast-ide.c
index 298ececfa366..ba02cf8d80a2 100644
--- a/arch/arm/mach-s3c24xx/bast-ide.c
+++ b/arch/arm/mach-s3c24xx/bast-ide.c
@@ -37,21 +37,9 @@ static struct pata_platform_info bast_ide_platdata = {
 #define IDE_CS	S3C2410_CS5
 
 static struct resource bast_ide0_resource[] = {
-	[0]	= {
-		.start	= IDE_CS + BAST_PA_IDEPRI,
-		.end	= IDE_CS + BAST_PA_IDEPRI + (8 * 0x20) - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1]	= {
-		.start	= IDE_CS + BAST_PA_IDEPRIAUX + (6 * 0x20) ,
-		.end	= IDE_CS + BAST_PA_IDEPRIAUX + (7 * 0x20) - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2]	= {
-		.start	= IRQ_IDE0,
-		.end	= IRQ_IDE0,
-		.flags	= IORESOURCE_IRQ,
-	},
+	[0] = DEFINE_RES_MEM(IDE_CS + BAST_PA_IDEPRI, 8 * 0x20),
+	[1] = DEFINE_RES_MEM(IDE_CS + BAST_PA_IDEPRIAUX + (6 * 0x20), 0x20),
+	[2] = DEFINE_RES_IRQ(IRQ_IDE0),
 };
 
 static struct platform_device bast_device_ide0 = {
@@ -67,21 +55,9 @@ static struct platform_device bast_device_ide0 = {
 };
 
 static struct resource bast_ide1_resource[] = {
-	[0]	= {
-		.start	= IDE_CS + BAST_PA_IDESEC,
-		.end	= IDE_CS + BAST_PA_IDESEC + (8 * 0x20) - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1]	= {
-		.start	= IDE_CS + BAST_PA_IDESECAUX + (6 * 0x20),
-		.end	= IDE_CS + BAST_PA_IDESECAUX + (7 * 0x20) - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2]	= {
-		.start	= IRQ_IDE1,
-		.end	= IRQ_IDE1,
-		.flags	= IORESOURCE_IRQ,
-	},
+	[0] = DEFINE_RES_MEM(IDE_CS + BAST_PA_IDESEC, 8 * 0x20),
+	[1] = DEFINE_RES_MEM(IDE_CS + BAST_PA_IDESECAUX + (6 * 0x20), 0x20),
+	[2] = DEFINE_RES_IRQ(IRQ_IDE1),
 };
 
 static struct platform_device bast_device_ide1 = {
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2416.c b/arch/arm/mach-s3c24xx/clock-s3c2416.c
index dbc9ab4aaca2..8702ecfaab30 100644
--- a/arch/arm/mach-s3c24xx/clock-s3c2416.c
+++ b/arch/arm/mach-s3c24xx/clock-s3c2416.c
@@ -144,6 +144,7 @@ static struct clk_lookup s3c2416_clk_lookup[] = {
 	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &hsmmc0_clk),
 	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &hsmmc_mux0.clk),
 	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &hsmmc_mux1.clk),
+	CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk2", &hsspi_mux.clk),
 };
 
 void __init s3c2416_init_clocks(int xtal)
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2443.c b/arch/arm/mach-s3c24xx/clock-s3c2443.c
index efb3ac359566..a4c5a520d994 100644
--- a/arch/arm/mach-s3c24xx/clock-s3c2443.c
+++ b/arch/arm/mach-s3c24xx/clock-s3c2443.c
@@ -179,6 +179,11 @@ static struct clk *clks[] __initdata = {
 	&clk_hsmmc,
 };
 
+static struct clk_lookup s3c2443_clk_lookup[] = {
+	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_hsmmc),
+	CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk2", &clk_hsspi.clk),
+};
+
 void __init s3c2443_init_clocks(int xtal)
 {
 	unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
@@ -210,6 +215,7 @@ void __init s3c2443_init_clocks(int xtal)
 
 	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+	clkdev_add_table(s3c2443_clk_lookup, ARRAY_SIZE(s3c2443_clk_lookup));
 
 	s3c_pwmclk_init();
 }
diff --git a/arch/arm/mach-s3c24xx/common-s3c2443.c b/arch/arm/mach-s3c24xx/common-s3c2443.c
index 460431589f39..aeeb2be283fa 100644
--- a/arch/arm/mach-s3c24xx/common-s3c2443.c
+++ b/arch/arm/mach-s3c24xx/common-s3c2443.c
@@ -424,11 +424,6 @@ static struct clk init_clocks_off[] = {
 		.enable		= s3c2443_clkcon_enable_p,
 		.ctrlbit	= S3C2443_PCLKCON_IIS,
 	}, {
-		.name		= "hsspi",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_HSSPI,
-	}, {
 		.name		= "adc",
 		.parent		= &clk_p,
 		.enable		= s3c2443_clkcon_enable_p,
@@ -562,6 +557,14 @@ static struct clk hsmmc1_clk = {
 	.ctrlbit	= S3C2443_HCLKCON_HSMMC,
 };
 
+static struct clk hsspi_clk = {
+	.name		= "spi",
+	.devname	= "s3c64xx-spi.0",
+	.parent		= &clk_p,
+	.enable		= s3c2443_clkcon_enable_p,
+	.ctrlbit	= S3C2443_PCLKCON_HSSPI,
+};
+
 /* EPLLCON compatible enough to get on/off information */
 
 void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll)
@@ -612,6 +615,7 @@ static struct clk *clks[] __initdata = {
 	&clk_usb_bus,
 	&clk_armdiv,
 	&hsmmc1_clk,
+	&hsspi_clk,
 };
 
 static struct clksrc_clk *clksrcs[] __initdata = {
@@ -629,6 +633,7 @@ static struct clk_lookup s3c2443_clk_lookup[] = {
 	CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
 	CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_esys_uart.clk),
 	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &hsmmc1_clk),
+	CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk0", &hsspi_clk),
 };
 
 void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll,
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/mach-s3c24xx/common.c
index 290942d9adda..56cdd34cce41 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/mach-s3c24xx/common.c
@@ -4,7 +4,7 @@
  *	http://www.simtec.co.uk/products/SWLINUX/
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * S3C24XX CPU Support
+ * Common code for S3C24XX machines
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -41,6 +41,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
+#include <mach/regs-clock.h>
 #include <mach/regs-gpio.h>
 #include <plat/regs-serial.h>
 
@@ -52,6 +53,8 @@
 #include <plat/s3c2416.h>
 #include <plat/s3c244x.h>
 #include <plat/s3c2443.h>
+#include <plat/cpu-freq.h>
+#include <plat/pll.h>
 
 /* table of supported CPUs */
 
@@ -234,3 +237,67 @@ void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
 
 	s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
 }
+
+/* Serial port registrations */
+
+static struct resource s3c2410_uart0_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C2410_PA_UART0, SZ_16K),
+	[1] = DEFINE_RES_NAMED(IRQ_S3CUART_RX0, \
+			IRQ_S3CUART_ERR0 - IRQ_S3CUART_RX0 + 1, \
+			NULL, IORESOURCE_IRQ)
+};
+
+static struct resource s3c2410_uart1_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C2410_PA_UART1, SZ_16K),
+	[1] = DEFINE_RES_NAMED(IRQ_S3CUART_RX1, \
+			IRQ_S3CUART_ERR1 - IRQ_S3CUART_RX1 + 1, \
+			NULL, IORESOURCE_IRQ)
+};
+
+static struct resource s3c2410_uart2_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C2410_PA_UART2, SZ_16K),
+	[1] = DEFINE_RES_NAMED(IRQ_S3CUART_RX2, \
+			IRQ_S3CUART_ERR2 - IRQ_S3CUART_RX2 + 1, \
+			NULL, IORESOURCE_IRQ)
+};
+
+static struct resource s3c2410_uart3_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C2443_PA_UART3, SZ_16K),
+	[1] = DEFINE_RES_NAMED(IRQ_S3CUART_RX3, \
+			IRQ_S3CUART_ERR3 - IRQ_S3CUART_RX3 + 1, \
+			NULL, IORESOURCE_IRQ)
+};
+
+struct s3c24xx_uart_resources s3c2410_uart_resources[] __initdata = {
+	[0] = {
+		.resources	= s3c2410_uart0_resource,
+		.nr_resources	= ARRAY_SIZE(s3c2410_uart0_resource),
+	},
+	[1] = {
+		.resources	= s3c2410_uart1_resource,
+		.nr_resources	= ARRAY_SIZE(s3c2410_uart1_resource),
+	},
+	[2] = {
+		.resources	= s3c2410_uart2_resource,
+		.nr_resources	= ARRAY_SIZE(s3c2410_uart2_resource),
+	},
+	[3] = {
+		.resources	= s3c2410_uart3_resource,
+		.nr_resources	= ARRAY_SIZE(s3c2410_uart3_resource),
+	},
+};
+
+/* initialise all the clocks */
+
+void __init_or_cpufreq s3c24xx_setup_clocks(unsigned long fclk,
+					   unsigned long hclk,
+					   unsigned long pclk)
+{
+	clk_upll.rate = s3c24xx_get_pll(__raw_readl(S3C2410_UPLLCON),
+					clk_xtal.rate);
+
+	clk_mpll.rate = fclk;
+	clk_h.rate = hclk;
+	clk_p.rate = pclk;
+	clk_f.rate = fclk;
+}
diff --git a/arch/arm/mach-s3c24xx/common.h b/arch/arm/mach-s3c24xx/common.h
new file mode 100644
index 000000000000..c2f596e7bc2d
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/common.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Common Header for S3C24XX SoCs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_S3C24XX_COMMON_H
+#define __ARCH_ARM_MACH_S3C24XX_COMMON_H __FILE__
+
+void s3c2410_restart(char mode, const char *cmd);
+void s3c244x_restart(char mode, const char *cmd);
+
+#endif /* __ARCH_ARM_MACH_S3C24XX_COMMON_H */
diff --git a/arch/arm/mach-s3c24xx/dma-s3c2443.c b/arch/arm/mach-s3c24xx/dma-s3c2443.c
index e227c472a40a..2d94228d2866 100644
--- a/arch/arm/mach-s3c24xx/dma-s3c2443.c
+++ b/arch/arm/mach-s3c24xx/dma-s3c2443.c
@@ -55,12 +55,20 @@ static struct s3c24xx_dma_map __initdata s3c2443_dma_mappings[] = {
 		.name		= "sdi",
 		.channels	= MAP(S3C2443_DMAREQSEL_SDI),
 	},
-	[DMACH_SPI0] = {
-		.name		= "spi0",
+	[DMACH_SPI0_RX] = {
+		.name		= "spi0-rx",
+		.channels	= MAP(S3C2443_DMAREQSEL_SPI0RX),
+	},
+	[DMACH_SPI0_TX] = {
+		.name		= "spi0-tx",
 		.channels	= MAP(S3C2443_DMAREQSEL_SPI0TX),
 	},
-	[DMACH_SPI1] = { /* only on S3C2443/S3C2450 */
-		.name		= "spi1",
+	[DMACH_SPI1_RX] = { /* only on S3C2443/S3C2450 */
+		.name		= "spi1-rx",
+		.channels	= MAP(S3C2443_DMAREQSEL_SPI1RX),
+	},
+	[DMACH_SPI1_TX] = { /* only on S3C2443/S3C2450 */
+		.name		= "spi1-tx",
 		.channels	= MAP(S3C2443_DMAREQSEL_SPI1TX),
 	},
 	[DMACH_UART0] = {
diff --git a/arch/arm/mach-s3c24xx/include/mach/dma.h b/arch/arm/mach-s3c24xx/include/mach/dma.h
index acbdfecd4186..454831b66037 100644
--- a/arch/arm/mach-s3c24xx/include/mach/dma.h
+++ b/arch/arm/mach-s3c24xx/include/mach/dma.h
@@ -47,6 +47,10 @@ enum dma_ch {
 	DMACH_UART2_SRC2,
 	DMACH_UART3,		/* s3c2443 has extra uart */
 	DMACH_UART3_SRC2,
+	DMACH_SPI0_TX,		/* s3c2443/2416/2450 hsspi0 */
+	DMACH_SPI0_RX,		/* s3c2443/2416/2450 hsspi0 */
+	DMACH_SPI1_TX,		/* s3c2443/2450 hsspi1 */
+	DMACH_SPI1_RX,		/* s3c2443/2450 hsspi1 */
 	DMACH_MAX,		/* the end entry */
 };
 
diff --git a/arch/arm/mach-s3c24xx/include/mach/irqs.h b/arch/arm/mach-s3c24xx/include/mach/irqs.h
index e53b2177319e..b7a9f4d469e8 100644
--- a/arch/arm/mach-s3c24xx/include/mach/irqs.h
+++ b/arch/arm/mach-s3c24xx/include/mach/irqs.h
@@ -134,6 +134,17 @@
 #define IRQ_S32416_WDT		S3C2410_IRQSUB(27)
 #define IRQ_S32416_AC97		S3C2410_IRQSUB(28)
 
+/* second interrupt-register of s3c2416/s3c2450 */
+
+#define S3C2416_IRQ(x)		S3C2410_IRQ((x) + 54 + 29)
+#define IRQ_S3C2416_2D		S3C2416_IRQ(0)
+#define IRQ_S3C2416_IIC1	S3C2416_IRQ(1)
+#define IRQ_S3C2416_RESERVED2	S3C2416_IRQ(2)
+#define IRQ_S3C2416_RESERVED3	S3C2416_IRQ(3)
+#define IRQ_S3C2416_PCM0	S3C2416_IRQ(4)
+#define IRQ_S3C2416_PCM1	S3C2416_IRQ(5)
+#define IRQ_S3C2416_I2S0	S3C2416_IRQ(6)
+#define IRQ_S3C2416_I2S1	S3C2416_IRQ(7)
 
 /* extra irqs for s3c2440 */
 
@@ -175,7 +186,9 @@
 #define IRQ_S3C2443_WDT		S3C2410_IRQSUB(27)
 #define IRQ_S3C2443_AC97	S3C2410_IRQSUB(28)
 
-#if defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416)
+#if defined(CONFIG_CPU_S3C2416)
+#define NR_IRQS (IRQ_S3C2416_I2S1 + 1)
+#elif defined(CONFIG_CPU_S3C2443)
 #define NR_IRQS (IRQ_S3C2443_AC97+1)
 #else
 #define NR_IRQS (IRQ_S3C2440_AC97+1)
diff --git a/arch/arm/mach-s3c24xx/include/mach/map.h b/arch/arm/mach-s3c24xx/include/mach/map.h
index 78ae807f1281..8ba381f2dbe1 100644
--- a/arch/arm/mach-s3c24xx/include/mach/map.h
+++ b/arch/arm/mach-s3c24xx/include/mach/map.h
@@ -98,6 +98,8 @@
 
 /* SPI */
 #define S3C2410_PA_SPI	   (0x59000000)
+#define S3C2443_PA_SPI0		(0x52000000)
+#define S3C2443_PA_SPI1		S3C2410_PA_SPI
 
 /* SDI */
 #define S3C2410_PA_SDI	   (0x5A000000)
@@ -162,4 +164,7 @@
 #define S3C_PA_WDT	    S3C2410_PA_WATCHDOG
 #define S3C_PA_NAND	    S3C24XX_PA_NAND
 
+#define S3C_PA_SPI0		S3C2443_PA_SPI0
+#define S3C_PA_SPI1		S3C2443_PA_SPI1
+
 #endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/plat-s3c24xx/irq-pm.c b/arch/arm/mach-s3c24xx/irq-pm.c
index 0efb2e2848c8..0efb2e2848c8 100644
--- a/arch/arm/plat-s3c24xx/irq-pm.c
+++ b/arch/arm/mach-s3c24xx/irq-pm.c
diff --git a/arch/arm/mach-s3c24xx/irq-s3c2416.c b/arch/arm/mach-s3c24xx/irq-s3c2416.c
index fd49f35e448e..23ec97370f32 100644
--- a/arch/arm/mach-s3c24xx/irq-s3c2416.c
+++ b/arch/arm/mach-s3c24xx/irq-s3c2416.c
@@ -27,6 +27,7 @@
 #include <linux/ioport.h>
 #include <linux/device.h>
 #include <linux/io.h>
+#include <linux/syscore_ops.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
@@ -192,6 +193,43 @@ static struct irq_chip s3c2416_irq_uart3 = {
 	.irq_ack	= s3c2416_irq_uart3_ack,
 };
 
+/* second interrupt register */
+
+static inline void s3c2416_irq_ack_second(struct irq_data *data)
+{
+	unsigned long bitval = 1UL << (data->irq - IRQ_S3C2416_2D);
+
+	__raw_writel(bitval, S3C2416_SRCPND2);
+	__raw_writel(bitval, S3C2416_INTPND2);
+}
+
+static void s3c2416_irq_mask_second(struct irq_data *data)
+{
+	unsigned long bitval = 1UL << (data->irq - IRQ_S3C2416_2D);
+	unsigned long mask;
+
+	mask = __raw_readl(S3C2416_INTMSK2);
+	mask |= bitval;
+	__raw_writel(mask, S3C2416_INTMSK2);
+}
+
+static void s3c2416_irq_unmask_second(struct irq_data *data)
+{
+	unsigned long bitval = 1UL << (data->irq - IRQ_S3C2416_2D);
+	unsigned long mask;
+
+	mask = __raw_readl(S3C2416_INTMSK2);
+	mask &= ~bitval;
+	__raw_writel(mask, S3C2416_INTMSK2);
+}
+
+struct irq_chip s3c2416_irq_second = {
+	.irq_ack	= s3c2416_irq_ack_second,
+	.irq_mask	= s3c2416_irq_mask_second,
+	.irq_unmask	= s3c2416_irq_unmask_second,
+};
+
+
 /* IRQ initialisation code */
 
 static int __init s3c2416_add_sub(unsigned int base,
@@ -213,6 +251,42 @@ static int __init s3c2416_add_sub(unsigned int base,
 	return 0;
 }
 
+static void __init s3c2416_irq_add_second(void)
+{
+	unsigned long pend;
+	unsigned long last;
+	int irqno;
+	int i;
+
+	/* first, clear all interrupts pending... */
+	last = 0;
+	for (i = 0; i < 4; i++) {
+		pend = __raw_readl(S3C2416_INTPND2);
+
+		if (pend == 0 || pend == last)
+			break;
+
+		__raw_writel(pend, S3C2416_SRCPND2);
+		__raw_writel(pend, S3C2416_INTPND2);
+		printk(KERN_INFO "irq: clearing pending status %08x\n",
+		       (int)pend);
+		last = pend;
+	}
+
+	for (irqno = IRQ_S3C2416_2D; irqno <= IRQ_S3C2416_I2S1; irqno++) {
+		switch (irqno) {
+		case IRQ_S3C2416_RESERVED2:
+		case IRQ_S3C2416_RESERVED3:
+			/* no IRQ here */
+			break;
+		default:
+			irq_set_chip_and_handler(irqno, &s3c2416_irq_second,
+						 handle_edge_irq);
+			set_irq_flags(irqno, IRQF_VALID);
+		}
+	}
+}
+
 static int __init s3c2416_irq_add(struct device *dev,
 				  struct subsys_interface *sif)
 {
@@ -232,6 +306,8 @@ static int __init s3c2416_irq_add(struct device *dev,
 			&s3c2416_irq_wdtac97,
 			IRQ_S3C2443_WDT, IRQ_S3C2443_AC97);
 
+	s3c2416_irq_add_second();
+
 	return 0;
 }
 
@@ -248,3 +324,25 @@ static int __init s3c2416_irq_init(void)
 
 arch_initcall(s3c2416_irq_init);
 
+#ifdef CONFIG_PM
+static struct sleep_save irq_save[] = {
+	SAVE_ITEM(S3C2416_INTMSK2),
+};
+
+int s3c2416_irq_suspend(void)
+{
+	s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
+
+	return 0;
+}
+
+void s3c2416_irq_resume(void)
+{
+	s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
+}
+
+struct syscore_ops s3c2416_irq_syscore_ops = {
+	.suspend	= s3c2416_irq_suspend,
+	.resume		= s3c2416_irq_resume,
+};
+#endif
diff --git a/arch/arm/mach-s3c24xx/mach-amlm5900.c b/arch/arm/mach-s3c24xx/mach-amlm5900.c
index 4220cc60de3c..ea2c4b003d58 100644
--- a/arch/arm/mach-s3c24xx/mach-amlm5900.c
+++ b/arch/arm/mach-s3c24xx/mach-amlm5900.c
@@ -65,13 +65,8 @@
 
 #include "common.h"
 
-static struct resource amlm5900_nor_resource = {
-		.start = 0x00000000,
-		.end   = 0x01000000 - 1,
-		.flags = IORESOURCE_MEM,
-};
-
-
+static struct resource amlm5900_nor_resource =
+			DEFINE_RES_MEM(0x00000000, SZ_16M);
 
 static struct mtd_partition amlm5900_mtd_partitions[] = {
 	{
diff --git a/arch/arm/mach-s3c24xx/mach-anubis.c b/arch/arm/mach-s3c24xx/mach-anubis.c
index 60c72c54c21e..5a7d0c0010f7 100644
--- a/arch/arm/mach-s3c24xx/mach-anubis.c
+++ b/arch/arm/mach-s3c24xx/mach-anubis.c
@@ -235,19 +235,9 @@ static struct pata_platform_info anubis_ide_platdata = {
 };
 
 static struct resource anubis_ide0_resource[] = {
-	{
-		.start	= S3C2410_CS3,
-		.end	= S3C2410_CS3 + (8*32) - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= S3C2410_CS3 + (1<<26) + (6*32),
-		.end	= S3C2410_CS3 + (1<<26) + (7*32) - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_IDE0,
-		.end	= IRQ_IDE0,
-		.flags	= IORESOURCE_IRQ,
-	},
+	[0] = DEFINE_RES_MEM(S3C2410_CS3, 8 * 32),
+	[2] = DEFINE_RES_MEM(S3C2410_CS3 + (1 << 26) + (6 * 32), 32),
+	[3] = DEFINE_RES_IRQ(IRQ_IDE0),
 };
 
 static struct platform_device anubis_device_ide0 = {
@@ -262,19 +252,9 @@ static struct platform_device anubis_device_ide0 = {
 };
 
 static struct resource anubis_ide1_resource[] = {
-	{
-		.start	= S3C2410_CS4,
-		.end	= S3C2410_CS4 + (8*32) - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= S3C2410_CS4 + (1<<26) + (6*32),
-		.end	= S3C2410_CS4 + (1<<26) + (7*32) - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_IDE0,
-		.end	= IRQ_IDE0,
-		.flags	= IORESOURCE_IRQ,
-	},
+	[0] = DEFINE_RES_MEM(S3C2410_CS4, 8 * 32),
+	[1] = DEFINE_RES_MEM(S3C2410_CS4 + (1 << 26) + (6 * 32), 32),
+	[2] = DEFINE_RES_IRQ(IRQ_IDE0),
 };
 
 static struct platform_device anubis_device_ide1 = {
@@ -298,16 +278,8 @@ static struct ax_plat_data anubis_asix_platdata = {
 };
 
 static struct resource anubis_asix_resource[] = {
-	[0] = {
-		.start = S3C2410_CS5,
-		.end   = S3C2410_CS5 + (0x20 * 0x20) -1,
-		.flags = IORESOURCE_MEM
-	},
-	[1] = {
-		.start = IRQ_ASIX,
-		.end   = IRQ_ASIX,
-		.flags = IORESOURCE_IRQ
-	}
+	[0] = DEFINE_RES_MEM(S3C2410_CS5, 0x20 * 0x20),
+	[1] = DEFINE_RES_IRQ(IRQ_ASIX),
 };
 
 static struct platform_device anubis_device_asix = {
@@ -323,21 +295,9 @@ static struct platform_device anubis_device_asix = {
 /* SM501 */
 
 static struct resource anubis_sm501_resource[] = {
-	[0] = {
-		.start	= S3C2410_CS2,
-		.end	= S3C2410_CS2 + SZ_8M,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= S3C2410_CS2 + SZ_64M - SZ_2M,
-		.end	= S3C2410_CS2 + SZ_64M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= IRQ_EINT0,
-		.end	= IRQ_EINT0,
-		.flags	= IORESOURCE_IRQ,
-	},
+	[0] = DEFINE_RES_MEM(S3C2410_CS2, SZ_8M),
+	[1] = DEFINE_RES_MEM(S3C2410_CS2 + SZ_64M - SZ_2M, SZ_2M),
+	[2] = DEFINE_RES_IRQ(IRQ_EINT0),
 };
 
 static struct sm501_initdata anubis_sm501_initdata = {
diff --git a/arch/arm/mach-s3c24xx/mach-at2440evb.c b/arch/arm/mach-s3c24xx/mach-at2440evb.c
index d7ae49c90118..7a05abf1270b 100644
--- a/arch/arm/mach-s3c24xx/mach-at2440evb.c
+++ b/arch/arm/mach-s3c24xx/mach-at2440evb.c
@@ -118,21 +118,10 @@ static struct s3c2410_platform_nand __initdata at2440evb_nand_info = {
 /* DM9000AEP 10/100 ethernet controller */
 
 static struct resource at2440evb_dm9k_resource[] = {
-	[0] = {
-		.start = S3C2410_CS3,
-		.end   = S3C2410_CS3 + 3,
-		.flags = IORESOURCE_MEM
-	},
-	[1] = {
-		.start = S3C2410_CS3 + 4,
-		.end   = S3C2410_CS3 + 7,
-		.flags = IORESOURCE_MEM
-	},
-	[2] = {
-		.start = IRQ_EINT7,
-		.end   = IRQ_EINT7,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
+	[0] = DEFINE_RES_MEM(S3C2410_CS3, 4),
+	[1] = DEFINE_RES_MEM(S3C2410_CS3 + 4, 4),
+	[2] = DEFINE_RES_NAMED(IRQ_EINT7, 1, NULL, IORESOURCE_IRQ \
+					| IORESOURCE_IRQ_HIGHEDGE),
 };
 
 static struct dm9000_plat_data at2440evb_dm9k_pdata = {
diff --git a/arch/arm/mach-s3c24xx/mach-bast.c b/arch/arm/mach-s3c24xx/mach-bast.c
index 53219c02eca0..1cf1720682d3 100644
--- a/arch/arm/mach-s3c24xx/mach-bast.c
+++ b/arch/arm/mach-s3c24xx/mach-bast.c
@@ -310,22 +310,10 @@ static struct s3c2410_platform_nand __initdata bast_nand_info = {
 /* DM9000 */
 
 static struct resource bast_dm9k_resource[] = {
-	[0] = {
-		.start = S3C2410_CS5 + BAST_PA_DM9000,
-		.end   = S3C2410_CS5 + BAST_PA_DM9000 + 3,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = S3C2410_CS5 + BAST_PA_DM9000 + 0x40,
-		.end   = S3C2410_CS5 + BAST_PA_DM9000 + 0x40 + 0x3f,
-		.flags = IORESOURCE_MEM,
-	},
-	[2] = {
-		.start = IRQ_DM9000,
-		.end   = IRQ_DM9000,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	}
-
+	[0] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_DM9000, 4),
+	[1] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_DM9000 + 0x40, 0x40),
+	[2] = DEFINE_RES_NAMED(IRQ_DM9000 , 1, NULL, IORESOURCE_IRQ \
+					| IORESOURCE_IRQ_HIGHLEVEL),
 };
 
 /* for the moment we limit ourselves to 16bit IO until some
@@ -400,21 +388,9 @@ static struct ax_plat_data bast_asix_platdata = {
 };
 
 static struct resource bast_asix_resource[] = {
-	[0] = {
-		.start = S3C2410_CS5 + BAST_PA_ASIXNET,
-		.end   = S3C2410_CS5 + BAST_PA_ASIXNET + (0x18 * 0x20) - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = S3C2410_CS5 + BAST_PA_ASIXNET + (0x1f * 0x20),
-		.end   = S3C2410_CS5 + BAST_PA_ASIXNET + (0x1f * 0x20),
-		.flags = IORESOURCE_MEM,
-	},
-	[2] = {
-		.start = IRQ_ASIX,
-		.end   = IRQ_ASIX,
-		.flags = IORESOURCE_IRQ
-	}
+	[0] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_ASIXNET, 0x18 * 0x20),
+	[1] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_ASIXNET + (0x1f * 0x20), 1),
+	[2] = DEFINE_RES_IRQ(IRQ_ASIX),
 };
 
 static struct platform_device bast_device_asix = {
@@ -430,11 +406,8 @@ static struct platform_device bast_device_asix = {
 /* Asix AX88796 10/100 ethernet controller parallel port */
 
 static struct resource bast_asixpp_resource[] = {
-	[0] = {
-		.start = S3C2410_CS5 + BAST_PA_ASIXNET + (0x18 * 0x20),
-		.end   = S3C2410_CS5 + BAST_PA_ASIXNET + (0x1b * 0x20) - 1,
-		.flags = IORESOURCE_MEM,
-	}
+	[0] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_ASIXNET + (0x18 * 0x20), \
+					0x30 * 0x20),
 };
 
 static struct platform_device bast_device_axpp = {
diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c
index ba5d85394105..0f29f64a3eeb 100644
--- a/arch/arm/mach-s3c24xx/mach-gta02.c
+++ b/arch/arm/mach-s3c24xx/mach-gta02.c
@@ -387,11 +387,8 @@ static struct physmap_flash_data gta02_nor_flash_data = {
 	.width		= 2,
 };
 
-static struct resource gta02_nor_flash_resource = {
-	.start		= GTA02_FLASH_BASE,
-	.end		= GTA02_FLASH_BASE + GTA02_FLASH_SIZE - 1,
-	.flags		= IORESOURCE_MEM,
-};
+static struct resource gta02_nor_flash_resource =
+	DEFINE_RES_MEM(GTA02_FLASH_BASE, GTA02_FLASH_SIZE);
 
 static struct platform_device gta02_nor_flash = {
 	.name		= "physmap-flash",
diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c
index 6b21ba107eab..bb8d008d5a5c 100644
--- a/arch/arm/mach-s3c24xx/mach-h1940.c
+++ b/arch/arm/mach-s3c24xx/mach-h1940.c
@@ -253,13 +253,8 @@ static struct pda_power_pdata power_supply_info = {
 };
 
 static struct resource power_supply_resources[] = {
-	[0] = {
-			.name	= "ac",
-			.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE |
-					  IORESOURCE_IRQ_HIGHEDGE,
-			.start	= IRQ_EINT2,
-			.end	= IRQ_EINT2,
-	},
+	[0] = DEFINE_RES_NAMED(IRQ_EINT2, 1, "ac", IORESOURCE_IRQ \
+			| IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE),
 };
 
 static struct platform_device power_supply = {
diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c
index 5d66fb218a41..f092b188ab70 100644
--- a/arch/arm/mach-s3c24xx/mach-mini2440.c
+++ b/arch/arm/mach-s3c24xx/mach-mini2440.c
@@ -292,21 +292,10 @@ static struct s3c2410_platform_nand mini2440_nand_info __initdata = {
 /* DM9000AEP 10/100 ethernet controller */
 
 static struct resource mini2440_dm9k_resource[] = {
-	[0] = {
-		.start = MACH_MINI2440_DM9K_BASE,
-		.end   = MACH_MINI2440_DM9K_BASE + 3,
-		.flags = IORESOURCE_MEM
-	},
-	[1] = {
-		.start = MACH_MINI2440_DM9K_BASE + 4,
-		.end   = MACH_MINI2440_DM9K_BASE + 7,
-		.flags = IORESOURCE_MEM
-	},
-	[2] = {
-		.start = IRQ_EINT7,
-		.end   = IRQ_EINT7,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
+	[0] = DEFINE_RES_MEM(MACH_MINI2440_DM9K_BASE, 4),
+	[1] = DEFINE_RES_MEM(MACH_MINI2440_DM9K_BASE + 4, 4),
+	[2] = DEFINE_RES_NAMED(IRQ_EINT7, 1, NULL, IORESOURCE_IRQ \
+						| IORESOURCE_IRQ_HIGHEDGE),
 };
 
 /*
diff --git a/arch/arm/mach-s3c24xx/mach-nexcoder.c b/arch/arm/mach-s3c24xx/mach-nexcoder.c
index 5198e3e1c5be..5c05ba1c330f 100644
--- a/arch/arm/mach-s3c24xx/mach-nexcoder.c
+++ b/arch/arm/mach-s3c24xx/mach-nexcoder.c
@@ -84,11 +84,7 @@ static struct s3c2410_uartcfg nexcoder_uartcfgs[] __initdata = {
 /* NOR Flash on NexVision NexCoder 2440 board */
 
 static struct resource nexcoder_nor_resource[] = {
-	[0] = {
-		.start = S3C2410_CS0,
-		.end   = S3C2410_CS0 + (8*1024*1024) - 1,
-		.flags = IORESOURCE_MEM,
-	}
+	[0] = DEFINE_RES_MEM(S3C2410_CS0, SZ_8M),
 };
 
 static struct map_info nexcoder_nor_map = {
diff --git a/arch/arm/mach-s3c24xx/mach-osiris.c b/arch/arm/mach-s3c24xx/mach-osiris.c
index c5daeb612a88..95d077255024 100644
--- a/arch/arm/mach-s3c24xx/mach-osiris.c
+++ b/arch/arm/mach-s3c24xx/mach-osiris.c
@@ -244,16 +244,8 @@ static struct s3c2410_platform_nand __initdata osiris_nand_info = {
 /* PCMCIA control and configuration */
 
 static struct resource osiris_pcmcia_resource[] = {
-	[0] = {
-		.start	= 0x0f000000,
-		.end	= 0x0f100000,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= 0x0c000000,
-		.end	= 0x0c100000,
-		.flags	= IORESOURCE_MEM,
-	}
+	[0] = DEFINE_RES_MEM(0x0f000000, SZ_1M),
+	[1] = DEFINE_RES_MEM(0x0c000000, SZ_1M),
 };
 
 static struct platform_device osiris_pcmcia = {
diff --git a/arch/arm/mach-s3c24xx/mach-otom.c b/arch/arm/mach-s3c24xx/mach-otom.c
index 5f1e0eeb38a9..bc4b6efb3b27 100644
--- a/arch/arm/mach-s3c24xx/mach-otom.c
+++ b/arch/arm/mach-s3c24xx/mach-otom.c
@@ -77,11 +77,7 @@ static struct s3c2410_uartcfg otom11_uartcfgs[] __initdata = {
 /* NOR Flash on NexVision OTOM board */
 
 static struct resource otom_nor_resource[] = {
-	[0] = {
-		.start = S3C2410_CS0,
-		.end   = S3C2410_CS0 + (4*1024*1024) - 1,
-		.flags = IORESOURCE_MEM,
-	}
+	[0] = DEFINE_RES_MEM(S3C2410_CS0, SZ_4M),
 };
 
 static struct platform_device otom_device_nor = {
diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c
index 91c16d9d2459..b868dddcb836 100644
--- a/arch/arm/mach-s3c24xx/mach-qt2410.c
+++ b/arch/arm/mach-s3c24xx/mach-qt2410.c
@@ -180,16 +180,8 @@ static struct s3c2410fb_mach_info qt2410_fb_info __initdata = {
 /* CS8900 */
 
 static struct resource qt2410_cs89x0_resources[] = {
-	[0] = {
-		.start	= 0x19000000,
-		.end	= 0x19000000 + 16,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_EINT9,
-		.end	= IRQ_EINT9,
-		.flags	= IORESOURCE_IRQ,
-	},
+	[0] = DEFINE_RES_MEM(0x19000000, 17),
+	[1] = DEFINE_RES_IRQ(IRQ_EINT9),
 };
 
 static struct platform_device qt2410_cs89x0 = {
diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c
index 200debb4c72d..a6762aae4727 100644
--- a/arch/arm/mach-s3c24xx/mach-rx1950.c
+++ b/arch/arm/mach-s3c24xx/mach-rx1950.c
@@ -152,13 +152,8 @@ static struct pda_power_pdata power_supply_info = {
 };
 
 static struct resource power_supply_resources[] = {
-	[0] = {
-			.name	= "ac",
-			.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE |
-					  IORESOURCE_IRQ_HIGHEDGE,
-			.start	= IRQ_EINT2,
-			.end	= IRQ_EINT2,
-	},
+	[0] = DEFINE_RES_NAMED(IRQ_EINT2, 1, "ac", IORESOURCE_IRQ \
+			| IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE),
 };
 
 static struct platform_device power_supply = {
diff --git a/arch/arm/mach-s3c24xx/mach-tct_hammer.c b/arch/arm/mach-s3c24xx/mach-tct_hammer.c
index 1114666f0efb..fe990289ee7d 100644
--- a/arch/arm/mach-s3c24xx/mach-tct_hammer.c
+++ b/arch/arm/mach-s3c24xx/mach-tct_hammer.c
@@ -56,11 +56,8 @@
 
 #include "common.h"
 
-static struct resource tct_hammer_nor_resource = {
-		.start = 0x00000000,
-		.end   = 0x01000000 - 1,
-		.flags = IORESOURCE_MEM,
-};
+static struct resource tct_hammer_nor_resource =
+			DEFINE_RES_MEM(0x00000000, SZ_16M);
 
 static struct mtd_partition tct_hammer_mtd_partitions[] = {
 	{
diff --git a/arch/arm/mach-s3c24xx/mach-vr1000.c b/arch/arm/mach-s3c24xx/mach-vr1000.c
index 87608d45dac4..bd5f189f0424 100644
--- a/arch/arm/mach-s3c24xx/mach-vr1000.c
+++ b/arch/arm/mach-s3c24xx/mach-vr1000.c
@@ -187,40 +187,17 @@ static struct platform_device serial_device = {
 /* DM9000 ethernet devices */
 
 static struct resource vr1000_dm9k0_resource[] = {
-	[0] = {
-		.start = S3C2410_CS5 + VR1000_PA_DM9000,
-		.end   = S3C2410_CS5 + VR1000_PA_DM9000 + 3,
-		.flags = IORESOURCE_MEM
-	},
-	[1] = {
-		.start = S3C2410_CS5 + VR1000_PA_DM9000 + 0x40,
-		.end   = S3C2410_CS5 + VR1000_PA_DM9000 + 0x7f,
-		.flags = IORESOURCE_MEM
-	},
-	[2] = {
-		.start = IRQ_VR1000_DM9000A,
-		.end   = IRQ_VR1000_DM9000A,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	}
-
+	[0] = DEFINE_RES_MEM(S3C2410_CS5 + VR1000_PA_DM9000, 4),
+	[1] = DEFINE_RES_MEM(S3C2410_CS5 + VR1000_PA_DM9000 + 0x40, 0x40),
+	[2] = DEFINE_RES_NAMED(IRQ_VR1000_DM9000A, 1, NULL, IORESOURCE_IRQ \
+						| IORESOURCE_IRQ_HIGHLEVEL),
 };
 
 static struct resource vr1000_dm9k1_resource[] = {
-	[0] = {
-		.start = S3C2410_CS5 + VR1000_PA_DM9000 + 0x80,
-		.end   = S3C2410_CS5 + VR1000_PA_DM9000 + 0x83,
-		.flags = IORESOURCE_MEM
-	},
-	[1] = {
-		.start = S3C2410_CS5 + VR1000_PA_DM9000 + 0xC0,
-		.end   = S3C2410_CS5 + VR1000_PA_DM9000 + 0xFF,
-		.flags = IORESOURCE_MEM
-	},
-	[2] = {
-		.start = IRQ_VR1000_DM9000N,
-		.end   = IRQ_VR1000_DM9000N,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	}
+	[0] = DEFINE_RES_MEM(S3C2410_CS5 + VR1000_PA_DM9000 + 0x80, 4),
+	[1] = DEFINE_RES_MEM(S3C2410_CS5 + VR1000_PA_DM9000 + 0xC0, 0x40),
+	[2] = DEFINE_RES_NAMED(IRQ_VR1000_DM9000N, 1, NULL, IORESOURCE_IRQ \
+						| IORESOURCE_IRQ_HIGHLEVEL),
 };
 
 /* for the moment we limit ourselves to 16bit IO until some
diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/mach-s3c24xx/pm.c
index 60627e63a254..60627e63a254 100644
--- a/arch/arm/plat-s3c24xx/pm.c
+++ b/arch/arm/mach-s3c24xx/pm.c
diff --git a/arch/arm/mach-s3c24xx/s3c2416.c b/arch/arm/mach-s3c24xx/s3c2416.c
index 7743fade50df..ed5a95ece9eb 100644
--- a/arch/arm/mach-s3c24xx/s3c2416.c
+++ b/arch/arm/mach-s3c24xx/s3c2416.c
@@ -106,6 +106,7 @@ int __init s3c2416_init(void)
 	register_syscore_ops(&s3c2416_pm_syscore_ops);
 #endif
 	register_syscore_ops(&s3c24xx_irq_syscore_ops);
+	register_syscore_ops(&s3c2416_irq_syscore_ops);
 
 	return device_register(&s3c2416_dev);
 }
diff --git a/arch/arm/mach-s3c24xx/setup-spi.c b/arch/arm/mach-s3c24xx/setup-spi.c
new file mode 100644
index 000000000000..5712c85f39b1
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/setup-spi.c
@@ -0,0 +1,39 @@
+/*
+ * HS-SPI device setup for S3C2443/S3C2416
+ *
+ * Copyright (C) 2011 Samsung Electronics Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/s3c64xx-spi.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-gpio.h>
+
+#ifdef CONFIG_S3C64XX_DEV_SPI0
+struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = {
+	.fifo_lvl_mask	= 0x7f,
+	.rx_lvl_offset	= 13,
+	.tx_st_done	= 21,
+	.high_speed	= 1,
+};
+
+int s3c64xx_spi0_cfg_gpio(struct platform_device *pdev)
+{
+	/* enable hsspi bit in misccr */
+	s3c2410_modify_misccr(S3C2416_MISCCR_HSSPI_EN2, 1);
+
+	s3c_gpio_cfgall_range(S3C2410_GPE(11), 3,
+			      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+
+	return 0;
+}
+#endif
diff --git a/arch/arm/mach-s3c24xx/simtec-nor.c b/arch/arm/mach-s3c24xx/simtec-nor.c
index b9d6d4f92c03..029744fcaacb 100644
--- a/arch/arm/mach-s3c24xx/simtec-nor.c
+++ b/arch/arm/mach-s3c24xx/simtec-nor.c
@@ -55,11 +55,7 @@ static struct physmap_flash_data simtec_nor_pdata = {
 };
 
 static struct resource simtec_nor_resource[] = {
-	[0] = {
-		.start = S3C2410_CS1 + 0x4000000,
-		.end   = S3C2410_CS1 + 0x4000000 + SZ_8M - 1,
-		.flags = IORESOURCE_MEM,
-	}
+	[0] = DEFINE_RES_MEM(S3C2410_CS1 + 0x4000000, SZ_8M),
 };
 
 static struct platform_device simtec_device_nor = {
diff --git a/arch/arm/plat-s3c24xx/sleep.S b/arch/arm/mach-s3c24xx/sleep.S
index c56612569b40..c56612569b40 100644
--- a/arch/arm/plat-s3c24xx/sleep.S
+++ b/arch/arm/mach-s3c24xx/sleep.S
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index 82c0915729ee..06ca1cd4cae2 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -210,7 +210,7 @@ config SMDK6410_WM1190_EV1
 	  and audio daughtercard for the Samsung SMDK6410 reference
 	  platform.  Enabling this option will build support for this
 	  module into the kernel.  The presence of the module will be
-	  detected at runtime so the the resulting kernel can be used
+	  detected at runtime so the resulting kernel can be used
 	  with or without the 1190-EV1 fitted.
 
 config SMDK6410_WM1192_EV1
@@ -226,7 +226,7 @@ config SMDK6410_WM1192_EV1
 	  daughtercard for the Samsung SMDK6410 reference platform.
 	  Enabling this option will build support for this module into
 	  the kernel.  The presence of the daughtercard will be
-	  detected at runtime so the the resulting kernel can be used
+	  detected at runtime so the resulting kernel can be used
 	  with or without the 1192-EV1 fitted.
 
 config MACH_NCP
diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c
index b313380342a5..be746e33e86c 100644
--- a/arch/arm/mach-s3c64xx/common.c
+++ b/arch/arm/mach-s3c64xx/common.c
@@ -384,3 +384,8 @@ void s3c64xx_restart(char mode, const char *cmd)
 	/* if all else fails, or mode was for soft, jump to 0 */
 	soft_restart(0);
 }
+
+void __init s3c64xx_init_late(void)
+{
+	s3c64xx_pm_late_initcall();
+}
diff --git a/arch/arm/mach-s3c64xx/common.h b/arch/arm/mach-s3c64xx/common.h
index 7a10be629aba..6cfc99bdfb37 100644
--- a/arch/arm/mach-s3c64xx/common.h
+++ b/arch/arm/mach-s3c64xx/common.h
@@ -24,6 +24,7 @@ void s3c64xx_register_clocks(unsigned long xtal, unsigned armclk_limit);
 void s3c64xx_setup_clocks(void);
 
 void s3c64xx_restart(char mode, const char *cmd);
+void s3c64xx_init_late(void);
 
 #ifdef CONFIG_CPU_S3C6400
 
@@ -51,4 +52,10 @@ extern void s3c6410_init_clocks(int xtal);
 #define s3c6410_init NULL
 #endif
 
+#ifdef CONFIG_PM
+int __init s3c64xx_pm_late_initcall(void);
+#else
+static inline int s3c64xx_pm_late_initcall(void) { return 0; }
+#endif
+
 #endif /* __ARCH_ARM_MACH_S3C64XX_COMMON_H */
diff --git a/arch/arm/mach-s3c64xx/cpuidle.c b/arch/arm/mach-s3c64xx/cpuidle.c
index 179460f38db7..acb197ccf3f7 100644
--- a/arch/arm/mach-s3c64xx/cpuidle.c
+++ b/arch/arm/mach-s3c64xx/cpuidle.c
@@ -27,12 +27,7 @@ static int s3c64xx_enter_idle(struct cpuidle_device *dev,
 			      struct cpuidle_driver *drv,
 			      int index)
 {
-	struct timeval before, after;
 	unsigned long tmp;
-	int idle_time;
-
-	local_irq_disable();
-	do_gettimeofday(&before);
 
 	/* Setup PWRCFG to enter idle mode */
 	tmp = __raw_readl(S3C64XX_PWR_CFG);
@@ -42,42 +37,32 @@ static int s3c64xx_enter_idle(struct cpuidle_device *dev,
 
 	cpu_do_idle();
 
-	do_gettimeofday(&after);
-	local_irq_enable();
-	idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC +
-		    (after.tv_usec - before.tv_usec);
-
-	dev->last_residency = idle_time;
 	return index;
 }
 
-static struct cpuidle_state s3c64xx_cpuidle_set[] = {
-	[0] = {
-		.enter			= s3c64xx_enter_idle,
-		.exit_latency		= 1,
-		.target_residency	= 1,
-		.flags			= CPUIDLE_FLAG_TIME_VALID,
-		.name			= "IDLE",
-		.desc			= "System active, ARM gated",
-	},
-};
+static DEFINE_PER_CPU(struct cpuidle_device, s3c64xx_cpuidle_device);
 
 static struct cpuidle_driver s3c64xx_cpuidle_driver = {
-	.name		= "s3c64xx_cpuidle",
-	.owner		= THIS_MODULE,
-	.state_count	= ARRAY_SIZE(s3c64xx_cpuidle_set),
-};
-
-static struct cpuidle_device s3c64xx_cpuidle_device = {
-	.state_count	= ARRAY_SIZE(s3c64xx_cpuidle_set),
+	.name	= "s3c64xx_cpuidle",
+	.owner  = THIS_MODULE,
+	.en_core_tk_irqen = 1,
+	.states = {
+		{
+			.enter            = s3c64xx_enter_idle,
+			.exit_latency     = 1,
+			.target_residency = 1,
+			.flags            = CPUIDLE_FLAG_TIME_VALID,
+			.name             = "IDLE",
+			.desc             = "System active, ARM gated",
+		},
+	},
+	.state_count = 1,
 };
 
 static int __init s3c64xx_init_cpuidle(void)
 {
 	int ret;
 
-	memcpy(s3c64xx_cpuidle_driver.states, s3c64xx_cpuidle_set,
-	       sizeof(s3c64xx_cpuidle_set));
 	cpuidle_register_driver(&s3c64xx_cpuidle_driver);
 
 	ret = cpuidle_register_device(&s3c64xx_cpuidle_device);
diff --git a/arch/arm/mach-s3c64xx/dev-audio.c b/arch/arm/mach-s3c64xx/dev-audio.c
index 93470b158a4e..124fd5d63006 100644
--- a/arch/arm/mach-s3c64xx/dev-audio.c
+++ b/arch/arm/mach-s3c64xx/dev-audio.c
@@ -57,21 +57,9 @@ static int s3c64xx_i2s_cfg_gpio(struct platform_device *pdev)
 }
 
 static struct resource s3c64xx_iis0_resource[] = {
-	[0] = {
-		.start = S3C64XX_PA_IIS0,
-		.end   = S3C64XX_PA_IIS0 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_I2S0_OUT,
-		.end   = DMACH_I2S0_OUT,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_I2S0_IN,
-		.end   = DMACH_I2S0_IN,
-		.flags = IORESOURCE_DMA,
-	},
+	[0] = DEFINE_RES_MEM(S3C64XX_PA_IIS0, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_I2S0_OUT),
+	[2] = DEFINE_RES_DMA(DMACH_I2S0_IN),
 };
 
 static struct s3c_audio_pdata i2sv3_pdata = {
@@ -95,21 +83,9 @@ struct platform_device s3c64xx_device_iis0 = {
 EXPORT_SYMBOL(s3c64xx_device_iis0);
 
 static struct resource s3c64xx_iis1_resource[] = {
-	[0] = {
-		.start = S3C64XX_PA_IIS1,
-		.end   = S3C64XX_PA_IIS1 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_I2S1_OUT,
-		.end   = DMACH_I2S1_OUT,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_I2S1_IN,
-		.end   = DMACH_I2S1_IN,
-		.flags = IORESOURCE_DMA,
-	},
+	[0] = DEFINE_RES_MEM(S3C64XX_PA_IIS1, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_I2S1_OUT),
+	[2] = DEFINE_RES_DMA(DMACH_I2S1_IN),
 };
 
 struct platform_device s3c64xx_device_iis1 = {
@@ -124,21 +100,9 @@ struct platform_device s3c64xx_device_iis1 = {
 EXPORT_SYMBOL(s3c64xx_device_iis1);
 
 static struct resource s3c64xx_iisv4_resource[] = {
-	[0] = {
-		.start = S3C64XX_PA_IISV4,
-		.end   = S3C64XX_PA_IISV4 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_HSI_I2SV40_TX,
-		.end   = DMACH_HSI_I2SV40_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_HSI_I2SV40_RX,
-		.end   = DMACH_HSI_I2SV40_RX,
-		.flags = IORESOURCE_DMA,
-	},
+	[0] = DEFINE_RES_MEM(S3C64XX_PA_IISV4, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_HSI_I2SV40_TX),
+	[2] = DEFINE_RES_DMA(DMACH_HSI_I2SV40_RX),
 };
 
 static struct s3c_audio_pdata i2sv4_pdata = {
@@ -187,21 +151,9 @@ static int s3c64xx_pcm_cfg_gpio(struct platform_device *pdev)
 }
 
 static struct resource s3c64xx_pcm0_resource[] = {
-	[0] = {
-		.start = S3C64XX_PA_PCM0,
-		.end   = S3C64XX_PA_PCM0 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_PCM0_TX,
-		.end   = DMACH_PCM0_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_PCM0_RX,
-		.end   = DMACH_PCM0_RX,
-		.flags = IORESOURCE_DMA,
-	},
+	[0] = DEFINE_RES_MEM(S3C64XX_PA_PCM0, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_PCM0_TX),
+	[2] = DEFINE_RES_DMA(DMACH_PCM0_RX),
 };
 
 static struct s3c_audio_pdata s3c_pcm0_pdata = {
@@ -220,21 +172,9 @@ struct platform_device s3c64xx_device_pcm0 = {
 EXPORT_SYMBOL(s3c64xx_device_pcm0);
 
 static struct resource s3c64xx_pcm1_resource[] = {
-	[0] = {
-		.start = S3C64XX_PA_PCM1,
-		.end   = S3C64XX_PA_PCM1 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_PCM1_TX,
-		.end   = DMACH_PCM1_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_PCM1_RX,
-		.end   = DMACH_PCM1_RX,
-		.flags = IORESOURCE_DMA,
-	},
+	[0] = DEFINE_RES_MEM(S3C64XX_PA_PCM1, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_PCM1_TX),
+	[2] = DEFINE_RES_DMA(DMACH_PCM1_RX),
 };
 
 static struct s3c_audio_pdata s3c_pcm1_pdata = {
@@ -265,31 +205,11 @@ static int s3c64xx_ac97_cfg_gpe(struct platform_device *pdev)
 }
 
 static struct resource s3c64xx_ac97_resource[] = {
-	[0] = {
-		.start = S3C64XX_PA_AC97,
-		.end   = S3C64XX_PA_AC97 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_AC97_PCMOUT,
-		.end   = DMACH_AC97_PCMOUT,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_AC97_PCMIN,
-		.end   = DMACH_AC97_PCMIN,
-		.flags = IORESOURCE_DMA,
-	},
-	[3] = {
-		.start = DMACH_AC97_MICIN,
-		.end   = DMACH_AC97_MICIN,
-		.flags = IORESOURCE_DMA,
-	},
-	[4] = {
-		.start = IRQ_AC97,
-		.end   = IRQ_AC97,
-		.flags = IORESOURCE_IRQ,
-	},
+	[0] = DEFINE_RES_MEM(S3C64XX_PA_AC97, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_AC97_PCMOUT),
+	[2] = DEFINE_RES_DMA(DMACH_AC97_PCMIN),
+	[3] = DEFINE_RES_DMA(DMACH_AC97_MICIN),
+	[4] = DEFINE_RES_IRQ(IRQ_AC97),
 };
 
 static struct s3c_audio_pdata s3c_ac97_pdata;
diff --git a/arch/arm/mach-s3c64xx/dev-uart.c b/arch/arm/mach-s3c64xx/dev-uart.c
index c681b99eda08..46e18d77ea93 100644
--- a/arch/arm/mach-s3c64xx/dev-uart.c
+++ b/arch/arm/mach-s3c64xx/dev-uart.c
@@ -31,55 +31,23 @@
 /* 64xx uarts are closer together */
 
 static struct resource s3c64xx_uart0_resource[] = {
-	[0] = {
-		.start	= S3C_PA_UART0,
-		.end	= S3C_PA_UART0 + 0x100,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_UART0,
-		.end	= IRQ_UART0,
-		.flags	= IORESOURCE_IRQ,
-	},
+	[0] = DEFINE_RES_MEM(S3C_PA_UART0, SZ_256),
+	[1] = DEFINE_RES_IRQ(IRQ_UART0),
 };
 
 static struct resource s3c64xx_uart1_resource[] = {
-	[0] = {
-		.start = S3C_PA_UART1,
-		.end   = S3C_PA_UART1 + 0x100,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_UART1,
-		.end	= IRQ_UART1,
-		.flags	= IORESOURCE_IRQ,
-	},
+	[0] = DEFINE_RES_MEM(S3C_PA_UART1, SZ_256),
+	[1] = DEFINE_RES_IRQ(IRQ_UART1),
 };
 
 static struct resource s3c6xx_uart2_resource[] = {
-	[0] = {
-		.start = S3C_PA_UART2,
-		.end   = S3C_PA_UART2 + 0x100,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_UART2,
-		.end	= IRQ_UART2,
-		.flags	= IORESOURCE_IRQ,
-	},
+	[0] = DEFINE_RES_MEM(S3C_PA_UART2, SZ_256),
+	[1] = DEFINE_RES_IRQ(IRQ_UART2),
 };
 
 static struct resource s3c64xx_uart3_resource[] = {
-	[0] = {
-		.start = S3C_PA_UART3,
-		.end   = S3C_PA_UART3 + 0x100,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_UART3,
-		.end	= IRQ_UART3,
-		.flags	= IORESOURCE_IRQ,
-	},
+	[0] = DEFINE_RES_MEM(S3C_PA_UART3, SZ_256),
+	[1] = DEFINE_RES_IRQ(IRQ_UART3),
 };
 
 
diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c
index b86f2779e4e6..314df0518afd 100644
--- a/arch/arm/mach-s3c64xx/mach-anw6410.c
+++ b/arch/arm/mach-s3c64xx/mach-anw6410.c
@@ -165,21 +165,10 @@ static void __init anw6410_dm9000_enable(void)
 }
 
 static struct resource anw6410_dm9000_resource[] = {
-	[0] = {
-		.start = ANW6410_PA_DM9000,
-		.end   = ANW6410_PA_DM9000 + 3,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = ANW6410_PA_DM9000 + 4,
-		.end   = ANW6410_PA_DM9000 + 4 + 500,
-		.flags = IORESOURCE_MEM,
-	},
-	[2] = {
-		.start = IRQ_EINT(15),
-		.end   = IRQ_EINT(15),
-		.flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
-	},
+	[0] = DEFINE_RES_MEM(ANW6410_PA_DM9000, 4),
+	[1] = DEFINE_RES_MEM(ANW6410_PA_DM9000 + 4, 501),
+	[2] = DEFINE_RES_NAMED(IRQ_EINT(15), 1, NULL, IORESOURCE_IRQ \
+					| IRQF_TRIGGER_HIGH),
 };
 
 static struct dm9000_plat_data anw6410_dm9000_pdata = {
@@ -241,6 +230,7 @@ MACHINE_START(ANW6410, "A&W6410")
 	.handle_irq	= vic_handle_irq,
 	.map_io		= anw6410_map_io,
 	.init_machine	= anw6410_machine_init,
+	.init_late	= s3c64xx_init_late,
 	.timer		= &s3c24xx_timer,
 	.restart	= s3c64xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
index 0ace108c3e3d..7a27f5603c74 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
@@ -182,6 +182,11 @@ static const struct i2c_board_info wm1277_devs[] = {
 	},
 };
 
+static const struct i2c_board_info wm6230_i2c_devs[] = {
+	{ I2C_BOARD_INFO("wm9081", 0x6c),
+	  .platform_data = &wm9081_pdata, },
+};
+
 static __devinitdata const struct {
 	u8 id;
 	const char *name;
@@ -195,7 +200,9 @@ static __devinitdata const struct {
 	{ .id = 0x03, .name = "1252-EV1 Glenlivet" },
 	{ .id = 0x11, .name = "6249-EV2 Glenfarclas", },
 	{ .id = 0x14, .name = "6271-EV1 Lochnagar" },
-	{ .id = 0x15, .name = "XXXX-EV1 Bells" },
+	{ .id = 0x15, .name = "6320-EV1 Bells",
+	  .i2c_devs = wm6230_i2c_devs,
+	  .num_i2c_devs = ARRAY_SIZE(wm6230_i2c_devs) },
 	{ .id = 0x21, .name = "1275-EV1 Mortlach" },
 	{ .id = 0x25, .name = "1274-EV1 Glencadam" },
 	{ .id = 0x31, .name = "1253-EV1 Tomatin",
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index e20bf5835365..6b20a71d7dbf 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -31,6 +31,7 @@
 #include <linux/spi/spi.h>
 
 #include <linux/i2c/pca953x.h>
+#include <linux/platform_data/s3c-hsotg.h>
 
 #include <video/platform_lcd.h>
 
@@ -61,7 +62,6 @@
 #include <plat/sdhci.h>
 #include <plat/gpio-cfg.h>
 #include <plat/s3c64xx-spi.h>
-#include <plat/udc-hs.h>
 
 #include <plat/keypad.h>
 #include <plat/clock.h>
@@ -232,21 +232,10 @@ static struct platform_device crag6410_gpio_keydev = {
 };
 
 static struct resource crag6410_dm9k_resource[] = {
-	[0] = {
-		.start	= S3C64XX_PA_XM0CSN5,
-		.end	= S3C64XX_PA_XM0CSN5 + 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= S3C64XX_PA_XM0CSN5 + (1 << 8),
-		.end	= S3C64XX_PA_XM0CSN5 + (1 << 8) + 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= S3C_EINT(17),
-		.end	= S3C_EINT(17),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	},
+	[0] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN5, 2),
+	[1] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN5 + (1 << 8), 2),
+	[2] = DEFINE_RES_NAMED(S3C_EINT(17), 1, NULL, IORESOURCE_IRQ \
+				| IORESOURCE_IRQ_HIGHLEVEL),
 };
 
 static struct dm9000_plat_data mini6410_dm9k_pdata = {
@@ -262,12 +251,7 @@ static struct platform_device crag6410_dm9k_device = {
 };
 
 static struct resource crag6410_mmgpio_resource[] = {
-	[0] = {
-		.name	= "dat",
-		.start	= S3C64XX_PA_XM0CSN4 + 1,
-		.end	= S3C64XX_PA_XM0CSN4 + 1,
-		.flags	= IORESOURCE_MEM,
-	},
+	[0] = DEFINE_RES_MEM_NAMED(S3C64XX_PA_XM0CSN4, 1, "dat"),
 };
 
 static struct platform_device crag6410_mmgpio = {
@@ -306,6 +290,24 @@ static struct regulator_consumer_supply wallvdd_consumers[] = {
 	REGULATOR_SUPPLY("SPKVDD2", "1-001a"),
 	REGULATOR_SUPPLY("SPKVDDL", "1-001a"),
 	REGULATOR_SUPPLY("SPKVDDR", "1-001a"),
+
+	REGULATOR_SUPPLY("DC1VDD", "0-0034"),
+	REGULATOR_SUPPLY("DC2VDD", "0-0034"),
+	REGULATOR_SUPPLY("DC3VDD", "0-0034"),
+	REGULATOR_SUPPLY("LDO1VDD", "0-0034"),
+	REGULATOR_SUPPLY("LDO2VDD", "0-0034"),
+	REGULATOR_SUPPLY("LDO4VDD", "0-0034"),
+	REGULATOR_SUPPLY("LDO5VDD", "0-0034"),
+	REGULATOR_SUPPLY("LDO6VDD", "0-0034"),
+	REGULATOR_SUPPLY("LDO7VDD", "0-0034"),
+	REGULATOR_SUPPLY("LDO8VDD", "0-0034"),
+	REGULATOR_SUPPLY("LDO9VDD", "0-0034"),
+	REGULATOR_SUPPLY("LDO10VDD", "0-0034"),
+	REGULATOR_SUPPLY("LDO11VDD", "0-0034"),
+
+	REGULATOR_SUPPLY("DC1VDD", "1-0034"),
+	REGULATOR_SUPPLY("DC2VDD", "1-0034"),
+	REGULATOR_SUPPLY("DC3VDD", "1-0034"),
 };
 
 static struct regulator_init_data wallvdd_data = {
@@ -669,6 +671,7 @@ static struct i2c_board_info i2c_devs1[] __initdata = {
 	  .irq = S3C_EINT(0),
 	  .platform_data = &glenfarclas_pmic_pdata },
 
+	{ I2C_BOARD_INFO("wlf-gf-module", 0x22) },
 	{ I2C_BOARD_INFO("wlf-gf-module", 0x24) },
 	{ I2C_BOARD_INFO("wlf-gf-module", 0x25) },
 	{ I2C_BOARD_INFO("wlf-gf-module", 0x26) },
@@ -811,6 +814,7 @@ MACHINE_START(WLF_CRAGG_6410, "Wolfson Cragganmore 6410")
 	.handle_irq	= vic_handle_irq,
 	.map_io		= crag6410_map_io,
 	.init_machine	= crag6410_machine_init,
+	.init_late	= s3c64xx_init_late,
 	.timer		= &s3c24xx_timer,
 	.restart	= s3c64xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c
index 521e07b8501b..1bf6b9da20fc 100644
--- a/arch/arm/mach-s3c64xx/mach-hmt.c
+++ b/arch/arm/mach-s3c64xx/mach-hmt.c
@@ -272,6 +272,7 @@ MACHINE_START(HMT, "Airgoo-HMT")
 	.handle_irq	= vic_handle_irq,
 	.map_io		= hmt_map_io,
 	.init_machine	= hmt_machine_init,
+	.init_late	= s3c64xx_init_late,
 	.timer		= &s3c24xx_timer,
 	.restart	= s3c64xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
index c34c2ab22ead..f8ea61ea3b33 100644
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -85,21 +85,10 @@ static struct s3c2410_uartcfg mini6410_uartcfgs[] __initdata = {
 /* DM9000AEP 10/100 ethernet controller */
 
 static struct resource mini6410_dm9k_resource[] = {
-	[0] = {
-		.start	= S3C64XX_PA_XM0CSN1,
-		.end	= S3C64XX_PA_XM0CSN1 + 1,
-		.flags	= IORESOURCE_MEM
-	},
-	[1] = {
-		.start	= S3C64XX_PA_XM0CSN1 + 4,
-		.end	= S3C64XX_PA_XM0CSN1 + 5,
-		.flags	= IORESOURCE_MEM
-	},
-	[2] = {
-		.start	= S3C_EINT(7),
-		.end	= S3C_EINT(7),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL
-	}
+	[0] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN1, 2),
+	[1] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN1 + 4, 2),
+	[2] = DEFINE_RES_NAMED(S3C_EINT(7), 1, NULL, IORESOURCE_IRQ \
+					| IORESOURCE_IRQ_HIGHLEVEL),
 };
 
 static struct dm9000_plat_data mini6410_dm9k_pdata = {
@@ -350,6 +339,7 @@ MACHINE_START(MINI6410, "MINI6410")
 	.handle_irq	= vic_handle_irq,
 	.map_io		= mini6410_map_io,
 	.init_machine	= mini6410_machine_init,
+	.init_late	= s3c64xx_init_late,
 	.timer		= &s3c24xx_timer,
 	.restart	= s3c64xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c
index 0efa2ba783b2..cad2e05eddf7 100644
--- a/arch/arm/mach-s3c64xx/mach-ncp.c
+++ b/arch/arm/mach-s3c64xx/mach-ncp.c
@@ -104,6 +104,7 @@ MACHINE_START(NCP, "NCP")
 	.handle_irq	= vic_handle_irq,
 	.map_io		= ncp_map_io,
 	.init_machine	= ncp_machine_init,
+	.init_late	= s3c64xx_init_late,
 	.timer		= &s3c24xx_timer,
 	.restart	= s3c64xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c
index be2a9a22ab74..b92d8e17d502 100644
--- a/arch/arm/mach-s3c64xx/mach-real6410.c
+++ b/arch/arm/mach-s3c64xx/mach-real6410.c
@@ -86,21 +86,10 @@ static struct s3c2410_uartcfg real6410_uartcfgs[] __initdata = {
 /* DM9000AEP 10/100 ethernet controller */
 
 static struct resource real6410_dm9k_resource[] = {
-	[0] = {
-		.start	= S3C64XX_PA_XM0CSN1,
-		.end	= S3C64XX_PA_XM0CSN1 + 1,
-		.flags	= IORESOURCE_MEM
-	},
-	[1] = {
-		.start	= S3C64XX_PA_XM0CSN1 + 4,
-		.end	= S3C64XX_PA_XM0CSN1 + 5,
-		.flags	= IORESOURCE_MEM
-	},
-	[2] = {
-		.start	= S3C_EINT(7),
-		.end	= S3C_EINT(7),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL
-	}
+	[0] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN1, 2),
+	[1] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN1 + 4, 2),
+	[2] = DEFINE_RES_NAMED(S3C_EINT(7), 1, NULL, IORESOURCE_IRQ \
+					| IORESOURCE_IRQ_HIGHLEVEL),
 };
 
 static struct dm9000_plat_data real6410_dm9k_pdata = {
@@ -331,6 +320,7 @@ MACHINE_START(REAL6410, "REAL6410")
 	.handle_irq	= vic_handle_irq,
 	.map_io		= real6410_map_io,
 	.init_machine	= real6410_machine_init,
+	.init_late	= s3c64xx_init_late,
 	.timer		= &s3c24xx_timer,
 	.restart	= s3c64xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c
index ce745e19aa27..ceeb1de40376 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq.c
@@ -18,6 +18,7 @@
 #include <linux/serial_core.h>
 #include <linux/spi/spi_gpio.h>
 #include <linux/usb/gpio_vbus.h>
+#include <linux/platform_data/s3c-hsotg.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
@@ -33,7 +34,6 @@
 #include <plat/gpio-cfg.h>
 #include <plat/hwmon.h>
 #include <plat/regs-serial.h>
-#include <plat/udc-hs.h>
 #include <plat/usb-control.h>
 #include <plat/sdhci.h>
 #include <plat/ts.h>
diff --git a/arch/arm/mach-s3c64xx/mach-smartq5.c b/arch/arm/mach-s3c64xx/mach-smartq5.c
index 3f42431d4dda..c5021d0335c6 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq5.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq5.c
@@ -152,6 +152,7 @@ MACHINE_START(SMARTQ5, "SmartQ 5")
 	.handle_irq	= vic_handle_irq,
 	.map_io		= smartq_map_io,
 	.init_machine	= smartq5_machine_init,
+	.init_late	= s3c64xx_init_late,
 	.timer		= &s3c24xx_timer,
 	.restart	= s3c64xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smartq7.c b/arch/arm/mach-s3c64xx/mach-smartq7.c
index e5c09b6db967..aa9072a4cbef 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq7.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq7.c
@@ -168,6 +168,7 @@ MACHINE_START(SMARTQ7, "SmartQ 7")
 	.handle_irq	= vic_handle_irq,
 	.map_io		= smartq_map_io,
 	.init_machine	= smartq7_machine_init,
+	.init_late	= s3c64xx_init_late,
 	.timer		= &s3c24xx_timer,
 	.restart	= s3c64xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c
index 5f096534f4c4..b0f4525c66bd 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6400.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c
@@ -93,6 +93,7 @@ MACHINE_START(SMDK6400, "SMDK6400")
 	.handle_irq	= vic_handle_irq,
 	.map_io		= smdk6400_map_io,
 	.init_machine	= smdk6400_machine_init,
+	.init_late	= s3c64xx_init_late,
 	.timer		= &s3c24xx_timer,
 	.restart	= s3c64xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index d55bc96d9582..d44319b09412 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -30,6 +30,7 @@
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
 #include <linux/pwm_backlight.h>
+#include <linux/platform_data/s3c-hsotg.h>
 
 #ifdef CONFIG_SMDK6410_WM1190_EV1
 #include <linux/mfd/wm8350/core.h>
@@ -72,7 +73,6 @@
 #include <plat/keypad.h>
 #include <plat/backlight.h>
 #include <plat/regs-fb-v4.h>
-#include <plat/udc-hs.h>
 
 #include "common.h"
 
@@ -182,16 +182,9 @@ static struct s3c_fb_platdata smdk6410_lcd_pdata __initdata = {
  */
 
 static struct resource smdk6410_smsc911x_resources[] = {
-	[0] = {
-		.start = S3C64XX_PA_XM0CSN1,
-		.end   = S3C64XX_PA_XM0CSN1 + SZ_64K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = S3C_EINT(10),
-		.end   = S3C_EINT(10),
-		.flags = IORESOURCE_IRQ | IRQ_TYPE_LEVEL_LOW,
-	},
+	[0] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN1, SZ_64K),
+	[1] = DEFINE_RES_NAMED(S3C_EINT(10), 1, NULL, IORESOURCE_IRQ \
+					| IRQ_TYPE_LEVEL_LOW),
 };
 
 static struct smsc911x_platform_config smdk6410_smsc911x_pdata = {
@@ -709,6 +702,7 @@ MACHINE_START(SMDK6410, "SMDK6410")
 	.handle_irq	= vic_handle_irq,
 	.map_io		= smdk6410_map_io,
 	.init_machine	= smdk6410_machine_init,
+	.init_late	= s3c64xx_init_late,
 	.timer		= &s3c24xx_timer,
 	.restart	= s3c64xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c
index 7d3e81b9dd06..7feb426fc202 100644
--- a/arch/arm/mach-s3c64xx/pm.c
+++ b/arch/arm/mach-s3c64xx/pm.c
@@ -365,10 +365,9 @@ static __init int s3c64xx_pm_initcall(void)
 }
 arch_initcall(s3c64xx_pm_initcall);
 
-static __init int s3c64xx_pm_late_initcall(void)
+int __init s3c64xx_pm_late_initcall(void)
 {
 	pm_genpd_poweroff_unused();
 
 	return 0;
 }
-late_initcall(s3c64xx_pm_late_initcall);
diff --git a/arch/arm/mach-s5p64x0/dev-audio.c b/arch/arm/mach-s5p64x0/dev-audio.c
index 35f1f226dabb..91113ddc51da 100644
--- a/arch/arm/mach-s5p64x0/dev-audio.c
+++ b/arch/arm/mach-s5p64x0/dev-audio.c
@@ -51,21 +51,9 @@ static struct s3c_audio_pdata s5p6440_i2s_pdata = {
 };
 
 static struct resource s5p64x0_i2s0_resource[] = {
-	[0] = {
-		.start	= S5P64X0_PA_I2S,
-		.end	= S5P64X0_PA_I2S + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= DMACH_I2S0_TX,
-		.end	= DMACH_I2S0_TX,
-		.flags	= IORESOURCE_DMA,
-	},
-	[2] = {
-		.start	= DMACH_I2S0_RX,
-		.end	= DMACH_I2S0_RX,
-		.flags	= IORESOURCE_DMA,
-	},
+	[0] = DEFINE_RES_MEM(S5P64X0_PA_I2S, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_I2S0_TX),
+	[2] = DEFINE_RES_DMA(DMACH_I2S0_RX),
 };
 
 struct platform_device s5p6440_device_iis = {
@@ -130,21 +118,9 @@ static struct s3c_audio_pdata s5p6450_i2s_pdata = {
 };
 
 static struct resource s5p6450_i2s1_resource[] = {
-	[0] = {
-		.start	= S5P6450_PA_I2S1,
-		.end	= S5P6450_PA_I2S1 + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= DMACH_I2S1_TX,
-		.end	= DMACH_I2S1_TX,
-		.flags	= IORESOURCE_DMA,
-	},
-	[2] = {
-		.start	= DMACH_I2S1_RX,
-		.end	= DMACH_I2S1_RX,
-		.flags	= IORESOURCE_DMA,
-	},
+	[0] = DEFINE_RES_MEM(S5P6450_PA_I2S1, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_I2S1_TX),
+	[2] = DEFINE_RES_DMA(DMACH_I2S1_RX),
 };
 
 struct platform_device s5p6450_device_iis1 = {
@@ -158,21 +134,9 @@ struct platform_device s5p6450_device_iis1 = {
 };
 
 static struct resource s5p6450_i2s2_resource[] = {
-	[0] = {
-		.start	= S5P6450_PA_I2S2,
-		.end	= S5P6450_PA_I2S2 + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= DMACH_I2S2_TX,
-		.end	= DMACH_I2S2_TX,
-		.flags	= IORESOURCE_DMA,
-	},
-	[2] = {
-		.start	= DMACH_I2S2_RX,
-		.end	= DMACH_I2S2_RX,
-		.flags	= IORESOURCE_DMA,
-	},
+	[0] = DEFINE_RES_MEM(S5P6450_PA_I2S2, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_I2S2_TX),
+	[2] = DEFINE_RES_DMA(DMACH_I2S2_RX),
 };
 
 struct platform_device s5p6450_device_iis2 = {
@@ -208,21 +172,9 @@ static struct s3c_audio_pdata s5p6440_pcm_pdata = {
 };
 
 static struct resource s5p6440_pcm0_resource[] = {
-	[0] = {
-		.start	= S5P64X0_PA_PCM,
-		.end	= S5P64X0_PA_PCM + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= DMACH_PCM0_TX,
-		.end	= DMACH_PCM0_TX,
-		.flags	= IORESOURCE_DMA,
-	},
-	[2] = {
-		.start	= DMACH_PCM0_RX,
-		.end	= DMACH_PCM0_RX,
-		.flags	= IORESOURCE_DMA,
-	},
+	[0] = DEFINE_RES_MEM(S5P64X0_PA_PCM, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_PCM0_TX),
+	[2] = DEFINE_RES_DMA(DMACH_PCM0_RX),
 };
 
 struct platform_device s5p6440_device_pcm = {
diff --git a/arch/arm/mach-s5pc100/dev-audio.c b/arch/arm/mach-s5pc100/dev-audio.c
index ab2d27172cbc..9d4bde3f1110 100644
--- a/arch/arm/mach-s5pc100/dev-audio.c
+++ b/arch/arm/mach-s5pc100/dev-audio.c
@@ -56,26 +56,10 @@ static struct s3c_audio_pdata i2sv5_pdata = {
 };
 
 static struct resource s5pc100_iis0_resource[] = {
-	[0] = {
-		.start = S5PC100_PA_I2S0,
-		.end   = S5PC100_PA_I2S0 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_I2S0_TX,
-		.end   = DMACH_I2S0_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_I2S0_RX,
-		.end   = DMACH_I2S0_RX,
-		.flags = IORESOURCE_DMA,
-	},
-	[3] = {
-		.start = DMACH_I2S0S_TX,
-		.end = DMACH_I2S0S_TX,
-		.flags = IORESOURCE_DMA,
-	},
+	[0] = DEFINE_RES_MEM(S5PC100_PA_I2S0, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_I2S0_TX),
+	[2] = DEFINE_RES_DMA(DMACH_I2S0_RX),
+	[3] = DEFINE_RES_DMA(DMACH_I2S0S_TX),
 };
 
 struct platform_device s5pc100_device_iis0 = {
@@ -103,21 +87,9 @@ static struct s3c_audio_pdata i2sv3_pdata = {
 };
 
 static struct resource s5pc100_iis1_resource[] = {
-	[0] = {
-		.start = S5PC100_PA_I2S1,
-		.end   = S5PC100_PA_I2S1 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_I2S1_TX,
-		.end   = DMACH_I2S1_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_I2S1_RX,
-		.end   = DMACH_I2S1_RX,
-		.flags = IORESOURCE_DMA,
-	},
+	[0] = DEFINE_RES_MEM(S5PC100_PA_I2S1, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_I2S1_TX),
+	[2] = DEFINE_RES_DMA(DMACH_I2S1_RX),
 };
 
 struct platform_device s5pc100_device_iis1 = {
@@ -131,21 +103,9 @@ struct platform_device s5pc100_device_iis1 = {
 };
 
 static struct resource s5pc100_iis2_resource[] = {
-	[0] = {
-		.start = S5PC100_PA_I2S2,
-		.end   = S5PC100_PA_I2S2 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_I2S2_TX,
-		.end   = DMACH_I2S2_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_I2S2_RX,
-		.end   = DMACH_I2S2_RX,
-		.flags = IORESOURCE_DMA,
-	},
+	[0] = DEFINE_RES_MEM(S5PC100_PA_I2S2, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_I2S2_TX),
+	[2] = DEFINE_RES_DMA(DMACH_I2S2_RX),
 };
 
 struct platform_device s5pc100_device_iis2 = {
@@ -184,21 +144,9 @@ static struct s3c_audio_pdata s3c_pcm_pdata = {
 };
 
 static struct resource s5pc100_pcm0_resource[] = {
-	[0] = {
-		.start = S5PC100_PA_PCM0,
-		.end   = S5PC100_PA_PCM0 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_PCM0_TX,
-		.end   = DMACH_PCM0_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_PCM0_RX,
-		.end   = DMACH_PCM0_RX,
-		.flags = IORESOURCE_DMA,
-	},
+	[0] = DEFINE_RES_MEM(S5PC100_PA_PCM0, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_PCM0_TX),
+	[2] = DEFINE_RES_DMA(DMACH_PCM0_RX),
 };
 
 struct platform_device s5pc100_device_pcm0 = {
@@ -212,21 +160,9 @@ struct platform_device s5pc100_device_pcm0 = {
 };
 
 static struct resource s5pc100_pcm1_resource[] = {
-	[0] = {
-		.start = S5PC100_PA_PCM1,
-		.end   = S5PC100_PA_PCM1 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_PCM1_TX,
-		.end   = DMACH_PCM1_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_PCM1_RX,
-		.end   = DMACH_PCM1_RX,
-		.flags = IORESOURCE_DMA,
-	},
+	[0] = DEFINE_RES_MEM(S5PC100_PA_PCM1, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_PCM1_TX),
+	[2] = DEFINE_RES_DMA(DMACH_PCM1_RX),
 };
 
 struct platform_device s5pc100_device_pcm1 = {
@@ -247,31 +183,11 @@ static int s5pc100_ac97_cfg_gpio(struct platform_device *pdev)
 }
 
 static struct resource s5pc100_ac97_resource[] = {
-	[0] = {
-		.start = S5PC100_PA_AC97,
-		.end   = S5PC100_PA_AC97 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_AC97_PCMOUT,
-		.end   = DMACH_AC97_PCMOUT,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_AC97_PCMIN,
-		.end   = DMACH_AC97_PCMIN,
-		.flags = IORESOURCE_DMA,
-	},
-	[3] = {
-		.start = DMACH_AC97_MICIN,
-		.end   = DMACH_AC97_MICIN,
-		.flags = IORESOURCE_DMA,
-	},
-	[4] = {
-		.start = IRQ_AC97,
-		.end   = IRQ_AC97,
-		.flags = IORESOURCE_IRQ,
-	},
+	[0] = DEFINE_RES_MEM(S5PC100_PA_AC97, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_AC97_PCMOUT),
+	[2] = DEFINE_RES_DMA(DMACH_AC97_PCMIN),
+	[3] = DEFINE_RES_DMA(DMACH_AC97_MICIN),
+	[4] = DEFINE_RES_IRQ(IRQ_AC97),
 };
 
 static struct s3c_audio_pdata s3c_ac97_pdata = {
@@ -308,16 +224,8 @@ static int s5pc100_spdif_cfg_gpg3(struct platform_device *pdev)
 }
 
 static struct resource s5pc100_spdif_resource[] = {
-	[0] = {
-		.start	= S5PC100_PA_SPDIF,
-		.end	= S5PC100_PA_SPDIF + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= DMACH_SPDIF,
-		.end	= DMACH_SPDIF,
-		.flags	= IORESOURCE_DMA,
-	},
+	[0] = DEFINE_RES_MEM(S5PC100_PA_SPDIF, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_SPDIF),
 };
 
 static struct s3c_audio_pdata s5p_spdif_pdata = {
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index 29594fc4fdf4..88e983b0c82e 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -85,6 +85,7 @@ config MACH_AQUILA
 	select S5P_DEV_ONENAND
 	select S5PV210_SETUP_FB_24BPP
 	select S5PV210_SETUP_SDHCI
+	select S5PV210_SETUP_USB_PHY
 	help
 	  Machine support for the Samsung Aquila target based on S5PC110 SoC
 
diff --git a/arch/arm/mach-s5pv210/dev-audio.c b/arch/arm/mach-s5pv210/dev-audio.c
index 63f5d82004b5..8367749c3eec 100644
--- a/arch/arm/mach-s5pv210/dev-audio.c
+++ b/arch/arm/mach-s5pv210/dev-audio.c
@@ -59,26 +59,10 @@ static struct s3c_audio_pdata i2sv5_pdata = {
 };
 
 static struct resource s5pv210_iis0_resource[] = {
-	[0] = {
-		.start = S5PV210_PA_IIS0,
-		.end   = S5PV210_PA_IIS0 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_I2S0_TX,
-		.end   = DMACH_I2S0_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_I2S0_RX,
-		.end   = DMACH_I2S0_RX,
-		.flags = IORESOURCE_DMA,
-	},
-	[3] = {
-		.start = DMACH_I2S0S_TX,
-		.end = DMACH_I2S0S_TX,
-		.flags = IORESOURCE_DMA,
-	},
+	[0] = DEFINE_RES_MEM(S5PV210_PA_IIS0, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_I2S0_TX),
+	[2] = DEFINE_RES_DMA(DMACH_I2S0_RX),
+	[3] = DEFINE_RES_DMA(DMACH_I2S0S_TX),
 };
 
 struct platform_device s5pv210_device_iis0 = {
@@ -106,21 +90,9 @@ static struct s3c_audio_pdata i2sv3_pdata = {
 };
 
 static struct resource s5pv210_iis1_resource[] = {
-	[0] = {
-		.start = S5PV210_PA_IIS1,
-		.end   = S5PV210_PA_IIS1 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_I2S1_TX,
-		.end   = DMACH_I2S1_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_I2S1_RX,
-		.end   = DMACH_I2S1_RX,
-		.flags = IORESOURCE_DMA,
-	},
+	[0] = DEFINE_RES_MEM(S5PV210_PA_IIS1, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_I2S1_TX),
+	[2] = DEFINE_RES_DMA(DMACH_I2S1_RX),
 };
 
 struct platform_device s5pv210_device_iis1 = {
@@ -134,21 +106,9 @@ struct platform_device s5pv210_device_iis1 = {
 };
 
 static struct resource s5pv210_iis2_resource[] = {
-	[0] = {
-		.start = S5PV210_PA_IIS2,
-		.end   = S5PV210_PA_IIS2 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_I2S2_TX,
-		.end   = DMACH_I2S2_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_I2S2_RX,
-		.end   = DMACH_I2S2_RX,
-		.flags = IORESOURCE_DMA,
-	},
+	[0] = DEFINE_RES_MEM(S5PV210_PA_IIS2, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_I2S2_TX),
+	[2] = DEFINE_RES_DMA(DMACH_I2S2_RX),
 };
 
 struct platform_device s5pv210_device_iis2 = {
@@ -188,21 +148,9 @@ static struct s3c_audio_pdata s3c_pcm_pdata = {
 };
 
 static struct resource s5pv210_pcm0_resource[] = {
-	[0] = {
-		.start = S5PV210_PA_PCM0,
-		.end   = S5PV210_PA_PCM0 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_PCM0_TX,
-		.end   = DMACH_PCM0_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_PCM0_RX,
-		.end   = DMACH_PCM0_RX,
-		.flags = IORESOURCE_DMA,
-	},
+	[0] = DEFINE_RES_MEM(S5PV210_PA_PCM0, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_PCM0_TX),
+	[2] = DEFINE_RES_DMA(DMACH_PCM0_RX),
 };
 
 struct platform_device s5pv210_device_pcm0 = {
@@ -216,21 +164,9 @@ struct platform_device s5pv210_device_pcm0 = {
 };
 
 static struct resource s5pv210_pcm1_resource[] = {
-	[0] = {
-		.start = S5PV210_PA_PCM1,
-		.end   = S5PV210_PA_PCM1 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_PCM1_TX,
-		.end   = DMACH_PCM1_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_PCM1_RX,
-		.end   = DMACH_PCM1_RX,
-		.flags = IORESOURCE_DMA,
-	},
+	[0] = DEFINE_RES_MEM(S5PV210_PA_PCM1, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_PCM1_TX),
+	[2] = DEFINE_RES_DMA(DMACH_PCM1_RX),
 };
 
 struct platform_device s5pv210_device_pcm1 = {
@@ -244,21 +180,9 @@ struct platform_device s5pv210_device_pcm1 = {
 };
 
 static struct resource s5pv210_pcm2_resource[] = {
-	[0] = {
-		.start = S5PV210_PA_PCM2,
-		.end   = S5PV210_PA_PCM2 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_PCM2_TX,
-		.end   = DMACH_PCM2_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_PCM2_RX,
-		.end   = DMACH_PCM2_RX,
-		.flags = IORESOURCE_DMA,
-	},
+	[0] = DEFINE_RES_MEM(S5PV210_PA_PCM2, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_PCM2_TX),
+	[2] = DEFINE_RES_DMA(DMACH_PCM2_RX),
 };
 
 struct platform_device s5pv210_device_pcm2 = {
@@ -279,31 +203,11 @@ static int s5pv210_ac97_cfg_gpio(struct platform_device *pdev)
 }
 
 static struct resource s5pv210_ac97_resource[] = {
-	[0] = {
-		.start = S5PV210_PA_AC97,
-		.end   = S5PV210_PA_AC97 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_AC97_PCMOUT,
-		.end   = DMACH_AC97_PCMOUT,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_AC97_PCMIN,
-		.end   = DMACH_AC97_PCMIN,
-		.flags = IORESOURCE_DMA,
-	},
-	[3] = {
-		.start = DMACH_AC97_MICIN,
-		.end   = DMACH_AC97_MICIN,
-		.flags = IORESOURCE_DMA,
-	},
-	[4] = {
-		.start = IRQ_AC97,
-		.end   = IRQ_AC97,
-		.flags = IORESOURCE_IRQ,
-	},
+	[0] = DEFINE_RES_MEM(S5PV210_PA_AC97, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_AC97_PCMOUT),
+	[2] = DEFINE_RES_DMA(DMACH_AC97_PCMIN),
+	[3] = DEFINE_RES_DMA(DMACH_AC97_MICIN),
+	[4] = DEFINE_RES_IRQ(IRQ_AC97),
 };
 
 static struct s3c_audio_pdata s3c_ac97_pdata = {
@@ -334,16 +238,8 @@ static int s5pv210_spdif_cfg_gpio(struct platform_device *pdev)
 }
 
 static struct resource s5pv210_spdif_resource[] = {
-	[0] = {
-		.start	= S5PV210_PA_SPDIF,
-		.end	= S5PV210_PA_SPDIF + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= DMACH_SPDIF,
-		.end	= DMACH_SPDIF,
-		.flags	= IORESOURCE_DMA,
-	},
+	[0] = DEFINE_RES_MEM(S5PV210_PA_SPDIF, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_SPDIF),
 };
 
 static struct s3c_audio_pdata samsung_spdif_pdata = {
diff --git a/arch/arm/mach-s5pv210/dma.c b/arch/arm/mach-s5pv210/dma.c
index 86ce62f66190..b8337e248b09 100644
--- a/arch/arm/mach-s5pv210/dma.c
+++ b/arch/arm/mach-s5pv210/dma.c
@@ -33,8 +33,6 @@
 #include <mach/irqs.h>
 #include <mach/dma.h>
 
-static u64 dma_dmamask = DMA_BIT_MASK(32);
-
 static u8 pdma0_peri[] = {
 	DMACH_UART0_RX,
 	DMACH_UART0_TX,
diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c
index a9ea64e0da0d..48d018f2332b 100644
--- a/arch/arm/mach-s5pv210/mach-aquila.c
+++ b/arch/arm/mach-s5pv210/mach-aquila.c
@@ -484,8 +484,8 @@ static struct wm8994_pdata wm8994_platform_data = {
 	.gpio_defaults[8] = 0x0100,
 	.gpio_defaults[9] = 0x0100,
 	.gpio_defaults[10] = 0x0100,
-	.ldo[0]	= { S5PV210_MP03(6), NULL, &wm8994_ldo1_data },	/* XM0FRNB_2 */
-	.ldo[1]	= { 0, NULL, &wm8994_ldo2_data },
+	.ldo[0]	= { S5PV210_MP03(6), &wm8994_ldo1_data },	/* XM0FRNB_2 */
+	.ldo[1]	= { 0, &wm8994_ldo2_data },
 };
 
 /* GPIO I2C PMIC */
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index 2cf5ed75f390..f20a97c8e411 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -25,7 +25,9 @@
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/gpio.h>
+#include <linux/mmc/host.h>
 #include <linux/interrupt.h>
+#include <linux/platform_data/s3c-hsotg.h>
 
 #include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
@@ -277,6 +279,9 @@ static void __init goni_tsp_init(void)
 	i2c2_devs[0].irq = gpio_to_irq(gpio);
 }
 
+/* USB OTG */
+static struct s3c_hsotg_plat goni_hsotg_pdata;
+
 static void goni_camera_init(void)
 {
 	s5pv210_fimc_setup_gpio(S5P_CAMPORT_A);
@@ -674,8 +679,8 @@ static struct wm8994_pdata wm8994_platform_data = {
 	.gpio_defaults[8] = 0x0100,
 	.gpio_defaults[9] = 0x0100,
 	.gpio_defaults[10] = 0x0100,
-	.ldo[0]	= { S5PV210_MP03(6), NULL, &wm8994_ldo1_data },	/* XM0FRNB_2 */
-	.ldo[1]	= { 0, NULL, &wm8994_ldo2_data },
+	.ldo[0]	= { S5PV210_MP03(6), &wm8994_ldo1_data },	/* XM0FRNB_2 */
+	.ldo[1]	= { 0, &wm8994_ldo2_data },
 };
 
 /* GPIO I2C PMIC */
@@ -765,6 +770,7 @@ static void __init goni_pmic_init(void)
 /* MoviNAND */
 static struct s3c_sdhci_platdata goni_hsmmc0_data __initdata = {
 	.max_width		= 4,
+	.host_caps2		= MMC_CAP2_BROKEN_VOLTAGE,
 	.cd_type		= S3C_SDHCI_CD_PERMANENT,
 };
 
@@ -939,6 +945,8 @@ static void __init goni_machine_init(void)
 	s3c_set_platdata(&goni_fimc_md_platdata, sizeof(goni_fimc_md_platdata),
 			 &s5p_device_fimc_md);
 
+	s3c_hsotg_set_platdata(&goni_hsotg_pdata);
+
 	goni_camera_init();
 
 	/* SPI */
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
index 91d4ad8bcc73..fa1b61209fd9 100644
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -119,21 +119,10 @@ static struct samsung_keypad_platdata smdkv210_keypad_data __initdata = {
 };
 
 static struct resource smdkv210_dm9000_resources[] = {
-	[0] = {
-		.start	= S5PV210_PA_SROM_BANK5,
-		.end	= S5PV210_PA_SROM_BANK5,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= S5PV210_PA_SROM_BANK5 + 2,
-		.end	= S5PV210_PA_SROM_BANK5 + 2,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= IRQ_EINT(9),
-		.end	= IRQ_EINT(9),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	},
+	[0] = DEFINE_RES_MEM(S5PV210_PA_SROM_BANK5, 1),
+	[1] = DEFINE_RES_MEM(S5PV210_PA_SROM_BANK5 + 2, 1),
+	[2] = DEFINE_RES_NAMED(IRQ_EINT(9), 1, NULL, IORESOURCE_IRQ \
+				| IORESOURCE_IRQ_HIGHLEVEL),
 };
 
 static struct dm9000_plat_data smdkv210_dm9000_platdata = {
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index 375d3f779a88..d1dc7f1a239c 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -538,6 +538,7 @@ MACHINE_START(ASSABET, "Intel-Assabet")
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
 	.init_machine	= assabet_init,
+	.init_late	= sa11x0_init_late,
 #ifdef CONFIG_SA1111
 	.dma_zone_size	= SZ_1M,
 #endif
diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c
index e0f0c030258c..b30fb99b587c 100644
--- a/arch/arm/mach-sa1100/badge4.c
+++ b/arch/arm/mach-sa1100/badge4.c
@@ -305,6 +305,7 @@ MACHINE_START(BADGE4, "Hewlett-Packard Laboratories BadgePAD 4")
 	.map_io		= badge4_map_io,
 	.nr_irqs	= SA1100_NR_IRQS,
 	.init_irq	= sa1100_init_irq,
+	.init_late	= sa11x0_init_late,
 	.timer		= &sa1100_timer,
 #ifdef CONFIG_SA1111
 	.dma_zone_size	= SZ_1M,
diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c
index 4a61f60e0502..09d7f4b4b354 100644
--- a/arch/arm/mach-sa1100/cerf.c
+++ b/arch/arm/mach-sa1100/cerf.c
@@ -134,5 +134,6 @@ MACHINE_START(CERF, "Intrinsyc CerfBoard/CerfCube")
 	.init_irq	= cerf_init_irq,
 	.timer		= &sa1100_timer,
 	.init_machine	= cerf_init,
+	.init_late	= sa11x0_init_late,
 	.restart	= sa11x0_restart,
 MACHINE_END
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index 48885b7efd6b..ea5cff38745c 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -313,6 +313,10 @@ static struct sa1100fb_mach_info collie_lcd_info = {
 
 	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
 	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
+
+#ifdef CONFIG_BACKLIGHT_LOCOMO
+	.lcd_power	= locomolcd_power
+#endif
 };
 
 static void __init collie_init(void)
@@ -397,5 +401,6 @@ MACHINE_START(COLLIE, "Sharp-Collie")
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
 	.init_machine	= collie_init,
+	.init_late	= sa11x0_init_late,
 	.restart	= sa11x0_restart,
 MACHINE_END
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index 7c524b4e415d..9db3e98e8b85 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -306,7 +306,7 @@ void sa11x0_register_irda(struct irda_platform_data *irda)
 }
 
 static struct resource sa1100_rtc_resources[] = {
-	DEFINE_RES_MEM(0x90010000, 0x9001003f),
+	DEFINE_RES_MEM(0x90010000, 0x40),
 	DEFINE_RES_IRQ_NAMED(IRQ_RTC1Hz, "rtc 1Hz"),
 	DEFINE_RES_IRQ_NAMED(IRQ_RTCAlrm, "rtc alarm"),
 };
@@ -359,6 +359,10 @@ static int __init sa1100_init(void)
 
 arch_initcall(sa1100_init);
 
+void __init sa11x0_init_late(void)
+{
+	sa11x0_pm_init();
+}
 
 /*
  * Common I/O mapping:
diff --git a/arch/arm/mach-sa1100/generic.h b/arch/arm/mach-sa1100/generic.h
index 9eb3b3cd5a63..a5b7c13da3e3 100644
--- a/arch/arm/mach-sa1100/generic.h
+++ b/arch/arm/mach-sa1100/generic.h
@@ -11,6 +11,7 @@ extern void __init sa1100_map_io(void);
 extern void __init sa1100_init_irq(void);
 extern void __init sa1100_init_gpio(void);
 extern void sa11x0_restart(char, const char *);
+extern void sa11x0_init_late(void);
 
 #define SET_BANK(__nr,__start,__size) \
 	mi->bank[__nr].start = (__start), \
@@ -41,3 +42,9 @@ void sa11x0_register_mcp(struct mcp_plat_data *data);
 
 struct sa1100fb_mach_info;
 void sa11x0_register_lcd(struct sa1100fb_mach_info *inf);
+
+#ifdef CONFIG_PM
+int sa11x0_pm_init(void);
+#else
+static inline int sa11x0_pm_init(void) { return 0; }
+#endif
diff --git a/arch/arm/mach-sa1100/h3100.c b/arch/arm/mach-sa1100/h3100.c
index b2e8d0f418e0..e1571eab08ae 100644
--- a/arch/arm/mach-sa1100/h3100.c
+++ b/arch/arm/mach-sa1100/h3100.c
@@ -110,6 +110,7 @@ MACHINE_START(H3100, "Compaq iPAQ H3100")
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
 	.init_machine	= h3100_mach_init,
+	.init_late	= sa11x0_init_late,
 	.restart	= sa11x0_restart,
 MACHINE_END
 
diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index cb6659f294fe..ba7a2901ab88 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -160,6 +160,7 @@ MACHINE_START(H3600, "Compaq iPAQ H3600")
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
 	.init_machine	= h3600_mach_init,
+	.init_late	= sa11x0_init_late,
 	.restart	= sa11x0_restart,
 MACHINE_END
 
diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c
index 5535475bf583..7f86bd911826 100644
--- a/arch/arm/mach-sa1100/hackkit.c
+++ b/arch/arm/mach-sa1100/hackkit.c
@@ -199,5 +199,6 @@ MACHINE_START(HACKKIT, "HackKit Cpu Board")
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
 	.init_machine	= hackkit_init,
+	.init_late	= sa11x0_init_late,
 	.restart	= sa11x0_restart,
 MACHINE_END
diff --git a/arch/arm/mach-sa1100/include/mach/collie.h b/arch/arm/mach-sa1100/include/mach/collie.h
index 52acda7061b7..f33679d2d3ee 100644
--- a/arch/arm/mach-sa1100/include/mach/collie.h
+++ b/arch/arm/mach-sa1100/include/mach/collie.h
@@ -1,7 +1,7 @@
 /*
  * arch/arm/mach-sa1100/include/mach/collie.h
  *
- * This file contains the hardware specific definitions for Assabet
+ * This file contains the hardware specific definitions for Collie
  * Only include this file from SA1100-specific files.
  *
  * ChangeLog:
@@ -13,6 +13,7 @@
 #ifndef __ASM_ARCH_COLLIE_H
 #define __ASM_ARCH_COLLIE_H
 
+extern void locomolcd_power(int on);
 
 #define COLLIE_SCOOP_GPIO_BASE	(GPIO_MAX + 1)
 #define COLLIE_GPIO_CHARGE_ON	(COLLIE_SCOOP_GPIO_BASE + 0)
diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c
index ca7a7e834720..e3084f47027d 100644
--- a/arch/arm/mach-sa1100/jornada720.c
+++ b/arch/arm/mach-sa1100/jornada720.c
@@ -348,6 +348,7 @@ MACHINE_START(JORNADA720, "HP Jornada 720")
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
 	.init_machine	= jornada720_mach_init,
+	.init_late	= sa11x0_init_late,
 #ifdef CONFIG_SA1111
 	.dma_zone_size	= SZ_1M,
 #endif
diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c
index eb6534e0b0d0..b775a0abec0a 100644
--- a/arch/arm/mach-sa1100/lart.c
+++ b/arch/arm/mach-sa1100/lart.c
@@ -147,6 +147,7 @@ MACHINE_START(LART, "LART")
 	.nr_irqs	= SA1100_NR_IRQS,
 	.init_irq	= sa1100_init_irq,
 	.init_machine	= lart_init,
+	.init_late	= sa11x0_init_late,
 	.timer		= &sa1100_timer,
 	.restart	= sa11x0_restart,
 MACHINE_END
diff --git a/arch/arm/mach-sa1100/nanoengine.c b/arch/arm/mach-sa1100/nanoengine.c
index 8f6446b9f025..41f69d97066f 100644
--- a/arch/arm/mach-sa1100/nanoengine.c
+++ b/arch/arm/mach-sa1100/nanoengine.c
@@ -112,5 +112,6 @@ MACHINE_START(NANOENGINE, "BSE nanoEngine")
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
 	.init_machine	= nanoengine_init,
+	.init_late	= sa11x0_init_late,
 	.restart	= sa11x0_restart,
 MACHINE_END
diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c
index 6c58f01b358a..266db873a4e4 100644
--- a/arch/arm/mach-sa1100/neponset.c
+++ b/arch/arm/mach-sa1100/neponset.c
@@ -89,6 +89,7 @@ void neponset_ncr_frob(unsigned int mask, unsigned int val)
 		WARN(1, "nep_base unset\n");
 	}
 }
+EXPORT_SYMBOL(neponset_ncr_frob);
 
 static void neponset_set_mctrl(struct uart_port *port, u_int mctrl)
 {
diff --git a/arch/arm/mach-sa1100/pci-nanoengine.c b/arch/arm/mach-sa1100/pci-nanoengine.c
index b49108b890a8..ff02e2da99f2 100644
--- a/arch/arm/mach-sa1100/pci-nanoengine.c
+++ b/arch/arm/mach-sa1100/pci-nanoengine.c
@@ -129,12 +129,6 @@ static int __init pci_nanoengine_map_irq(const struct pci_dev *dev, u8 slot,
 	return NANOENGINE_IRQ_GPIO_PCI;
 }
 
-struct pci_bus * __init pci_nanoengine_scan_bus(int nr, struct pci_sys_data *sys)
-{
-	return pci_scan_root_bus(NULL, sys->busnr, &pci_nano_ops, sys,
-				 &sys->resources);
-}
-
 static struct resource pci_io_ports =
 	DEFINE_RES_IO_NAMED(0x400, 0x400, "PCI IO");
 
@@ -274,7 +268,7 @@ int __init pci_nanoengine_setup(int nr, struct pci_sys_data *sys)
 static struct hw_pci nanoengine_pci __initdata = {
 	.map_irq		= pci_nanoengine_map_irq,
 	.nr_controllers		= 1,
-	.scan			= pci_nanoengine_scan_bus,
+	.ops			= &pci_nano_ops,
 	.setup			= pci_nanoengine_setup,
 };
 
diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c
index 1602575a0d5c..37fe0a0a5369 100644
--- a/arch/arm/mach-sa1100/pleb.c
+++ b/arch/arm/mach-sa1100/pleb.c
@@ -135,5 +135,6 @@ MACHINE_START(PLEB, "PLEB")
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
 	.init_machine   = pleb_init,
+	.init_late	= sa11x0_init_late,
 	.restart	= sa11x0_restart,
 MACHINE_END
diff --git a/arch/arm/mach-sa1100/pm.c b/arch/arm/mach-sa1100/pm.c
index 2fa499ec6afe..690cf0ce5c0c 100644
--- a/arch/arm/mach-sa1100/pm.c
+++ b/arch/arm/mach-sa1100/pm.c
@@ -117,10 +117,8 @@ static const struct platform_suspend_ops sa11x0_pm_ops = {
 	.valid		= suspend_valid_only_mem,
 };
 
-static int __init sa11x0_pm_init(void)
+int __init sa11x0_pm_init(void)
 {
 	suspend_set_ops(&sa11x0_pm_ops);
 	return 0;
 }
-
-late_initcall(sa11x0_pm_init);
diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c
index ca8bf59b9047..5d33fc3108ef 100644
--- a/arch/arm/mach-sa1100/shannon.c
+++ b/arch/arm/mach-sa1100/shannon.c
@@ -104,5 +104,6 @@ MACHINE_START(SHANNON, "Shannon (AKA: Tuxscreen)")
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
 	.init_machine	= shannon_init,
+	.init_late	= sa11x0_init_late,
 	.restart	= sa11x0_restart,
 MACHINE_END
diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
index 3efae03cb3d7..fbd53593be54 100644
--- a/arch/arm/mach-sa1100/simpad.c
+++ b/arch/arm/mach-sa1100/simpad.c
@@ -395,6 +395,7 @@ MACHINE_START(SIMPAD, "Simpad")
 	.map_io		= simpad_map_io,
 	.nr_irqs	= SA1100_NR_IRQS,
 	.init_irq	= sa1100_init_irq,
+	.init_late	= sa11x0_init_late,
 	.timer		= &sa1100_timer,
 	.restart	= sa11x0_restart,
 MACHINE_END
diff --git a/arch/arm/mach-shark/pci.c b/arch/arm/mach-shark/pci.c
index 7cb79a092f31..9089407d5326 100644
--- a/arch/arm/mach-shark/pci.c
+++ b/arch/arm/mach-shark/pci.c
@@ -29,10 +29,9 @@ extern void __init via82c505_preinit(void);
 
 static struct hw_pci shark_pci __initdata = {
 	.setup		= via82c505_setup,
-	.swizzle	= pci_std_swizzle,
 	.map_irq	= shark_map_irq,
 	.nr_controllers = 1,
-	.scan		= via82c505_scan_bus,
+	.ops		= &via82c505_ops,
 	.preinit	= via82c505_preinit,
 };
 
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 34560cab45d9..f31383c32f9c 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -41,6 +41,12 @@ config ARCH_R8A7779
 	select ARM_GIC
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 
+config ARCH_EMEV2
+	bool "Emma Mobile EV2"
+	select CPU_V7
+	select ARM_GIC
+	select ARCH_WANT_OPTIONAL_GPIOLIB
+
 comment "SH-Mobile Board Type"
 
 config MACH_G3EVM
@@ -58,6 +64,7 @@ config MACH_AP4EVB
 	depends on ARCH_SH7372
 	select ARCH_REQUIRE_GPIOLIB
 	select SH_LCD_MIPI_DSI
+	select SND_SOC_AK4642 if SND_SIMPLE_CARD
 
 choice
 	prompt "AP4EVB LCD panel selection"
@@ -82,6 +89,7 @@ config MACH_MACKEREL
 	bool "mackerel board"
 	depends on ARCH_SH7372
 	select ARCH_REQUIRE_GPIOLIB
+	select SND_SOC_AK4642 if SND_SIMPLE_CARD
 
 config MACH_KOTA2
 	bool "KOTA2 board"
@@ -93,11 +101,28 @@ config MACH_BONITO
 	select ARCH_REQUIRE_GPIOLIB
 	depends on ARCH_R8A7740
 
+config MACH_ARMADILLO800EVA
+	bool "Armadillo-800 EVA board"
+	depends on ARCH_R8A7740
+	select ARCH_REQUIRE_GPIOLIB
+	select USE_OF
+
 config MACH_MARZEN
 	bool "MARZEN board"
 	depends on ARCH_R8A7779
 	select ARCH_REQUIRE_GPIOLIB
 
+config MACH_KZM9D
+	bool "KZM9D board"
+	depends on ARCH_EMEV2
+	select USE_OF
+
+config MACH_KZM9G
+	bool "KZM-A9-GT board"
+	depends on ARCH_SH73A0
+	select ARCH_REQUIRE_GPIOLIB
+	select USE_OF
+
 comment "SH-Mobile System Configuration"
 
 config CPU_HAS_INTEVT
@@ -110,7 +135,8 @@ config MEMORY_START
 	hex "Physical memory start address"
 	default "0x50000000" if MACH_G3EVM
 	default "0x40000000" if MACH_G4EVM || MACH_AP4EVB || MACH_AG5EVM || \
-				MACH_MACKEREL || MACH_BONITO
+				MACH_MACKEREL || MACH_BONITO || \
+				MACH_ARMADILLO800EVA
 	default "0x41000000" if MACH_KOTA2
 	default "0x00000000"
 	---help---
@@ -122,7 +148,8 @@ config MEMORY_SIZE
 	hex "Physical memory size"
 	default "0x08000000" if MACH_G3EVM
 	default "0x08000000" if MACH_G4EVM
-	default "0x20000000" if MACH_AG5EVM || MACH_BONITO
+	default "0x20000000" if MACH_AG5EVM || MACH_BONITO || \
+				MACH_ARMADILLO800EVA
 	default "0x1e000000" if MACH_KOTA2
 	default "0x10000000" if MACH_AP4EVB || MACH_MACKEREL
 	default "0x04000000"
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index e7c2590b75d9..8aa1962c22a2 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -3,7 +3,7 @@
 #
 
 # Common objects
-obj-y				:= timer.o console.o clock.o
+obj-y				:= timer.o console.o clock.o common.o
 
 # CPU objects
 obj-$(CONFIG_ARCH_SH7367)	+= setup-sh7367.o clock-sh7367.o intc-sh7367.o
@@ -12,12 +12,14 @@ obj-$(CONFIG_ARCH_SH7372)	+= setup-sh7372.o clock-sh7372.o intc-sh7372.o
 obj-$(CONFIG_ARCH_SH73A0)	+= setup-sh73a0.o clock-sh73a0.o intc-sh73a0.o
 obj-$(CONFIG_ARCH_R8A7740)	+= setup-r8a7740.o clock-r8a7740.o intc-r8a7740.o
 obj-$(CONFIG_ARCH_R8A7779)	+= setup-r8a7779.o clock-r8a7779.o intc-r8a7779.o
+obj-$(CONFIG_ARCH_EMEV2)	+= setup-emev2.o clock-emev2.o
 
 # SMP objects
 smp-y				:= platsmp.o headsmp.o
 smp-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
 smp-$(CONFIG_ARCH_SH73A0)	+= smp-sh73a0.o
 smp-$(CONFIG_ARCH_R8A7779)	+= smp-r8a7779.o
+smp-$(CONFIG_ARCH_EMEV2)	+= smp-emev2.o
 
 # Pinmux setup
 pfc-y				:=
@@ -49,6 +51,9 @@ obj-$(CONFIG_MACH_MACKEREL)	+= board-mackerel.o
 obj-$(CONFIG_MACH_KOTA2)	+= board-kota2.o
 obj-$(CONFIG_MACH_BONITO)	+= board-bonito.o
 obj-$(CONFIG_MACH_MARZEN)	+= board-marzen.o
+obj-$(CONFIG_MACH_ARMADILLO800EVA)	+= board-armadillo800eva.o
+obj-$(CONFIG_MACH_KZM9D)	+= board-kzm9d.o
+obj-$(CONFIG_MACH_KZM9G)	+= board-kzm9g.o
 
 # Framework support
 obj-$(CONFIG_SMP)		+= $(smp-y)
diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index cb224a344af0..5a6f22f05e99 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -365,23 +365,13 @@ static struct platform_device mipidsi0_device = {
 };
 
 /* SDHI0 */
-static irqreturn_t ag5evm_sdhi0_gpio_cd(int irq, void *arg)
-{
-	struct device *dev = arg;
-	struct sh_mobile_sdhi_info *info = dev->platform_data;
-	struct tmio_mmc_data *pdata = info->pdata;
-
-	tmio_mmc_cd_wakeup(pdata);
-
-	return IRQ_HANDLED;
-}
-
 static struct sh_mobile_sdhi_info sdhi0_info = {
 	.dma_slave_tx	= SHDMA_SLAVE_SDHI0_TX,
 	.dma_slave_rx	= SHDMA_SLAVE_SDHI0_RX,
-	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT,
+	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD,
 	.tmio_caps	= MMC_CAP_SD_HIGHSPEED,
 	.tmio_ocr_mask	= MMC_VDD_27_28 | MMC_VDD_28_29,
+	.cd_gpio	= GPIO_PORT251,
 };
 
 static struct resource sdhi0_resources[] = {
@@ -557,7 +547,6 @@ static void __init ag5evm_init(void)
 	lcd_backlight_reset();
 
 	/* enable SDHI0 on CN15 [SD I/F] */
-	gpio_request(GPIO_FN_SDHICD0, NULL);
 	gpio_request(GPIO_FN_SDHIWP0, NULL);
 	gpio_request(GPIO_FN_SDHICMD0, NULL);
 	gpio_request(GPIO_FN_SDHICLK0, NULL);
@@ -566,13 +555,6 @@ static void __init ag5evm_init(void)
 	gpio_request(GPIO_FN_SDHID0_1, NULL);
 	gpio_request(GPIO_FN_SDHID0_0, NULL);
 
-	if (!request_irq(intcs_evt2irq(0x3c0), ag5evm_sdhi0_gpio_cd,
-			 IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
-			 "sdhi0 cd", &sdhi0_device.dev))
-		sdhi0_info.tmio_flags |= TMIO_MMC_HAS_COLD_CD;
-	else
-		pr_warn("Unable to setup SDHI0 GPIO IRQ\n");
-
 	/* enable SDHI1 on CN4 [WLAN I/F] */
 	gpio_request(GPIO_FN_SDHICLK1, NULL);
 	gpio_request(GPIO_FN_SDHICMD1_PU, NULL);
@@ -598,5 +580,6 @@ MACHINE_START(AG5EVM, "ag5evm")
 	.init_irq	= sh73a0_init_irq,
 	.handle_irq	= gic_handle_irq,
 	.init_machine	= ag5evm_init,
+	.init_late	= shmobile_init_late,
 	.timer		= &shmobile_timer,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index b56dde2732bb..ace60246a5df 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -50,6 +50,7 @@
 #include <media/soc_camera.h>
 
 #include <sound/sh_fsi.h>
+#include <sound/simple_card.h>
 
 #include <video/sh_mobile_hdmi.h>
 #include <video/sh_mobile_lcdc.h>
@@ -785,17 +786,25 @@ static struct platform_device fsi_device = {
 	},
 };
 
-static struct fsi_ak4642_info fsi2_ak4643_info = {
+static struct asoc_simple_dai_init_info fsi2_ak4643_init_info = {
+	.fmt		= SND_SOC_DAIFMT_LEFT_J,
+	.codec_daifmt	= SND_SOC_DAIFMT_CBM_CFM,
+	.cpu_daifmt	= SND_SOC_DAIFMT_CBS_CFS,
+	.sysclk		= 11289600,
+};
+
+static struct asoc_simple_card_info fsi2_ak4643_info = {
 	.name		= "AK4643",
 	.card		= "FSI2A-AK4643",
 	.cpu_dai	= "fsia-dai",
 	.codec		= "ak4642-codec.0-0013",
 	.platform	= "sh_fsi2",
-	.id		= FSI_PORT_A,
+	.codec_dai	= "ak4642-hifi",
+	.init		= &fsi2_ak4643_init_info,
 };
 
 static struct platform_device fsi_ak4643_device = {
-	.name	= "fsi-ak4642-audio",
+	.name	= "asoc-simple-card",
 	.dev	= {
 		.platform_data	= &fsi2_ak4643_info,
 	},
@@ -900,8 +909,26 @@ static struct platform_device lcdc1_device = {
 	},
 };
 
+static struct asoc_simple_dai_init_info fsi2_hdmi_init_info = {
+	.cpu_daifmt	= SND_SOC_DAIFMT_CBM_CFM,
+};
+
+static struct asoc_simple_card_info fsi2_hdmi_info = {
+	.name		= "HDMI",
+	.card		= "FSI2B-HDMI",
+	.cpu_dai	= "fsib-dai",
+	.codec		= "sh-mobile-hdmi",
+	.platform	= "sh_fsi2",
+	.codec_dai	= "sh_mobile_hdmi-hifi",
+	.init		= &fsi2_hdmi_init_info,
+};
+
 static struct platform_device fsi_hdmi_device = {
-	.name		= "sh_fsi2_b_hdmi",
+	.name	= "asoc-simple-card",
+	.id	= 1,
+	.dev	= {
+		.platform_data	= &fsi2_hdmi_info,
+	},
 };
 
 static struct gpio_led ap4evb_leds[] = {
@@ -997,6 +1024,8 @@ static struct sh_mobile_ceu_companion csi2 = {
 
 static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
 	.flags = SH_CEU_FLAG_USE_8BIT_BUS,
+	.max_width = 8188,
+	.max_height = 8188,
 	.csi2 = &csi2,
 };
 
@@ -1440,5 +1469,6 @@ MACHINE_START(AP4EVB, "ap4evb")
 	.init_irq	= sh7372_init_irq,
 	.handle_irq	= shmobile_handle_irq_intc,
 	.init_machine	= ap4evb_init,
+	.init_late	= shmobile_init_late,
 	.timer		= &shmobile_timer,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
new file mode 100644
index 000000000000..9e37026ef9dd
--- /dev/null
+++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
@@ -0,0 +1,784 @@
+/*
+ * armadillo 800 eva board support
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ * Copyright (C) 2012 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/input.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/sh_eth.h>
+#include <linux/videodev2.h>
+#include <linux/usb/renesas_usbhs.h>
+#include <linux/mfd/tmio.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/sh_mmcif.h>
+#include <linux/mmc/sh_mobile_sdhi.h>
+#include <mach/common.h>
+#include <mach/irqs.h>
+#include <asm/page.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <mach/r8a7740.h>
+#include <video/sh_mobile_lcdc.h>
+
+/*
+ * CON1		Camera Module
+ * CON2		Extension Bus
+ * CON3		HDMI Output
+ * CON4		Composite Video Output
+ * CON5		H-UDI JTAG
+ * CON6		ARM JTAG
+ * CON7		SD1
+ * CON8		SD2
+ * CON9		RTC BackUp
+ * CON10	Monaural Mic Input
+ * CON11	Stereo Headphone Output
+ * CON12	Audio Line Output(L)
+ * CON13	Audio Line Output(R)
+ * CON14	AWL13 Module
+ * CON15	Extension
+ * CON16	LCD1
+ * CON17	LCD2
+ * CON19	Power Input
+ * CON20	USB1
+ * CON21	USB2
+ * CON22	Serial
+ * CON23	LAN
+ * CON24	USB3
+ * LED1		Camera LED(Yellow)
+ * LED2		Power LED (Green)
+ * ED3-LED6	User LED(Yellow)
+ * LED7		LAN link LED(Green)
+ * LED8		LAN activity LED(Yellow)
+ */
+
+/*
+ * DipSwitch
+ *
+ *                    SW1
+ *
+ * -12345678-+---------------+----------------------------
+ *  1        | boot          | hermit
+ *  0        | boot          | OS auto boot
+ * -12345678-+---------------+----------------------------
+ *   00      | boot device   | eMMC
+ *   10      | boot device   | SDHI0 (CON7)
+ *   01      | boot device   | -
+ *   11      | boot device   | Extension Buss (CS0)
+ * -12345678-+---------------+----------------------------
+ *     0     | Extension Bus | D8-D15 disable, eMMC enable
+ *     1     | Extension Bus | D8-D15 enable,  eMMC disable
+ * -12345678-+---------------+----------------------------
+ *      0    | SDHI1         | COM8 disable, COM14 enable
+ *      1    | SDHI1         | COM8 enable,  COM14 disable
+ * -12345678-+---------------+----------------------------
+ *       0   | USB0          | COM20 enable,  COM24 disable
+ *       1   | USB0          | COM20 disable, COM24 enable
+ * -12345678-+---------------+----------------------------
+ *        00 | JTAG          | SH-X2
+ *        10 | JTAG          | ARM
+ *        01 | JTAG          | -
+ *        11 | JTAG          | Boundary Scan
+ *-----------+---------------+----------------------------
+ */
+
+/*
+ * USB function
+ *
+ * When you use USB Function,
+ * set SW1.6 ON, and connect cable to CN24.
+ *
+ * USBF needs workaround on R8A7740 chip.
+ * These are a little bit complex.
+ * see
+ *	usbhsf_power_ctrl()
+ *
+ * CAUTION
+ *
+ * It uses autonomy mode for USB hotplug at this point
+ * (= usbhs_private.platform_callback.get_vbus is NULL),
+ * since we don't know what's happen on PM control
+ * on this workaround.
+ */
+#define USBCR1		0xe605810a
+#define USBH		0xC6700000
+#define USBH_USBCTR	0x10834
+
+struct usbhsf_private {
+	struct clk *phy;
+	struct clk *usb24;
+	struct clk *pci;
+	struct clk *func;
+	struct clk *host;
+	void __iomem *usbh_base;
+	struct renesas_usbhs_platform_info info;
+};
+
+#define usbhsf_get_priv(pdev)				\
+	container_of(renesas_usbhs_get_info(pdev),	\
+		     struct usbhsf_private, info)
+
+static int usbhsf_get_id(struct platform_device *pdev)
+{
+	return USBHS_GADGET;
+}
+
+static void usbhsf_power_ctrl(struct platform_device *pdev,
+			      void __iomem *base, int enable)
+{
+	struct usbhsf_private *priv = usbhsf_get_priv(pdev);
+
+	/*
+	 * Work around for USB Function.
+	 * It needs USB host clock, and settings
+	 */
+	if (enable) {
+		/*
+		 * enable all the related usb clocks
+		 * for usb workaround
+		 */
+		clk_enable(priv->usb24);
+		clk_enable(priv->pci);
+		clk_enable(priv->host);
+		clk_enable(priv->func);
+		clk_enable(priv->phy);
+
+		/*
+		 * set USBCR1
+		 *
+		 * Port1 is driven by USB function,
+		 * Port2 is driven by USB HOST
+		 * One HOST (Port1 or Port2 is HOST)
+		 * USB PLL input clock = 24MHz
+		 */
+		__raw_writew(0xd750, USBCR1);
+		mdelay(1);
+
+		/*
+		 * start USB Host
+		 */
+		__raw_writel(0x0000000c, priv->usbh_base + USBH_USBCTR);
+		__raw_writel(0x00000008, priv->usbh_base + USBH_USBCTR);
+		mdelay(10);
+
+		/*
+		 * USB PHY Power ON
+		 */
+		__raw_writew(0xd770, USBCR1);
+		__raw_writew(0x4000, base + 0x102); /* USBF :: SUSPMODE */
+
+	} else {
+		__raw_writel(0x0000010f, priv->usbh_base + USBH_USBCTR);
+		__raw_writew(0xd7c0, USBCR1); /* GPIO */
+
+		clk_disable(priv->phy);
+		clk_disable(priv->func);	/* usb work around */
+		clk_disable(priv->host);	/* usb work around */
+		clk_disable(priv->pci);		/* usb work around */
+		clk_disable(priv->usb24);	/* usb work around */
+	}
+}
+
+static void usbhsf_hardware_exit(struct platform_device *pdev)
+{
+	struct usbhsf_private *priv = usbhsf_get_priv(pdev);
+
+	if (!IS_ERR(priv->phy))
+		clk_put(priv->phy);
+	if (!IS_ERR(priv->usb24))
+		clk_put(priv->usb24);
+	if (!IS_ERR(priv->pci))
+		clk_put(priv->pci);
+	if (!IS_ERR(priv->host))
+		clk_put(priv->host);
+	if (!IS_ERR(priv->func))
+		clk_put(priv->func);
+	if (priv->usbh_base)
+		iounmap(priv->usbh_base);
+
+	priv->phy	= NULL;
+	priv->usb24	= NULL;
+	priv->pci	= NULL;
+	priv->host	= NULL;
+	priv->func	= NULL;
+	priv->usbh_base	= NULL;
+}
+
+static int usbhsf_hardware_init(struct platform_device *pdev)
+{
+	struct usbhsf_private *priv = usbhsf_get_priv(pdev);
+
+	priv->phy	= clk_get(&pdev->dev, "phy");
+	priv->usb24	= clk_get(&pdev->dev, "usb24");
+	priv->pci	= clk_get(&pdev->dev, "pci");
+	priv->func	= clk_get(&pdev->dev, "func");
+	priv->host	= clk_get(&pdev->dev, "host");
+	priv->usbh_base	= ioremap_nocache(USBH, 0x20000);
+
+	if (IS_ERR(priv->phy)		||
+	    IS_ERR(priv->usb24)		||
+	    IS_ERR(priv->pci)		||
+	    IS_ERR(priv->host)		||
+	    IS_ERR(priv->func)		||
+	    !priv->usbh_base) {
+		dev_err(&pdev->dev, "USB clock setting failed\n");
+		usbhsf_hardware_exit(pdev);
+		return -EIO;
+	}
+
+	/* usb24 use 1/1 of parent clock (= usb24s = 24MHz) */
+	clk_set_rate(priv->usb24,
+		     clk_get_rate(clk_get_parent(priv->usb24)));
+
+	return 0;
+}
+
+static struct usbhsf_private usbhsf_private = {
+	.info = {
+		.platform_callback = {
+			.get_id		= usbhsf_get_id,
+			.hardware_init	= usbhsf_hardware_init,
+			.hardware_exit	= usbhsf_hardware_exit,
+			.power_ctrl	= usbhsf_power_ctrl,
+		},
+		.driver_param = {
+			.buswait_bwait		= 5,
+			.detection_delay	= 5,
+		},
+	}
+};
+
+static struct resource usbhsf_resources[] = {
+	{
+		.name	= "USBHS",
+		.start	= 0xe6890000,
+		.end	= 0xe6890104 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= evt2irq(0x0A20),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device usbhsf_device = {
+	.name	= "renesas_usbhs",
+	.dev = {
+		.platform_data = &usbhsf_private.info,
+	},
+	.id = -1,
+	.num_resources	= ARRAY_SIZE(usbhsf_resources),
+	.resource	= usbhsf_resources,
+};
+
+/* Ether */
+static struct sh_eth_plat_data sh_eth_platdata = {
+	.phy			= 0x00, /* LAN8710A */
+	.edmac_endian		= EDMAC_LITTLE_ENDIAN,
+	.register_type		= SH_ETH_REG_GIGABIT,
+	.phy_interface		= PHY_INTERFACE_MODE_MII,
+};
+
+static struct resource sh_eth_resources[] = {
+	{
+		.start	= 0xe9a00000,
+		.end	= 0xe9a00800 - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= 0xe9a01800,
+		.end	= 0xe9a02000 - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= evt2irq(0x0500),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sh_eth_device = {
+	.name = "sh-eth",
+	.id = -1,
+	.dev = {
+		.platform_data = &sh_eth_platdata,
+	},
+	.resource = sh_eth_resources,
+	.num_resources = ARRAY_SIZE(sh_eth_resources),
+};
+
+/* LCDC */
+static struct fb_videomode lcdc0_mode = {
+	.name		= "AMPIER/AM-800480",
+	.xres		= 800,
+	.yres		= 480,
+	.left_margin	= 88,
+	.right_margin	= 40,
+	.hsync_len	= 128,
+	.upper_margin	= 20,
+	.lower_margin	= 5,
+	.vsync_len	= 5,
+	.sync		= 0,
+};
+
+static struct sh_mobile_lcdc_info lcdc0_info = {
+	.clock_source	= LCDC_CLK_BUS,
+	.ch[0] = {
+		.chan		= LCDC_CHAN_MAINLCD,
+		.fourcc		= V4L2_PIX_FMT_RGB565,
+		.interface_type	= RGB24,
+		.clock_divider	= 5,
+		.flags		= 0,
+		.lcd_modes	= &lcdc0_mode,
+		.num_modes	= 1,
+		.panel_cfg = {
+			.width	= 111,
+			.height = 68,
+		},
+	},
+};
+
+static struct resource lcdc0_resources[] = {
+	[0] = {
+		.name	= "LCD0",
+		.start	= 0xfe940000,
+		.end	= 0xfe943fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= intcs_evt2irq(0x580),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device lcdc0_device = {
+	.name		= "sh_mobile_lcdc_fb",
+	.num_resources	= ARRAY_SIZE(lcdc0_resources),
+	.resource	= lcdc0_resources,
+	.id		= 0,
+	.dev	= {
+		.platform_data	= &lcdc0_info,
+		.coherent_dma_mask = ~0,
+	},
+};
+
+/* GPIO KEY */
+#define GPIO_KEY(c, g, d) { .code = c, .gpio = g, .desc = d, .active_low = 1 }
+
+static struct gpio_keys_button gpio_buttons[] = {
+	GPIO_KEY(KEY_POWER,	GPIO_PORT99,	"SW1"),
+	GPIO_KEY(KEY_BACK,	GPIO_PORT100,	"SW2"),
+	GPIO_KEY(KEY_MENU,	GPIO_PORT97,	"SW3"),
+	GPIO_KEY(KEY_HOME,	GPIO_PORT98,	"SW4"),
+};
+
+static struct gpio_keys_platform_data gpio_key_info = {
+	.buttons	= gpio_buttons,
+	.nbuttons	= ARRAY_SIZE(gpio_buttons),
+};
+
+static struct platform_device gpio_keys_device = {
+	.name   = "gpio-keys",
+	.id     = -1,
+	.dev    = {
+		.platform_data  = &gpio_key_info,
+	},
+};
+
+/* SDHI0 */
+/*
+ * FIXME
+ *
+ * It use polling mode here, since
+ * CD (= Card Detect) pin is not connected to SDHI0_CD.
+ * We can use IRQ31 as card detect irq,
+ * but it needs chattering removal operation
+ */
+#define IRQ31	evt2irq(0x33E0)
+static struct sh_mobile_sdhi_info sdhi0_info = {
+	.tmio_caps	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |\
+			  MMC_CAP_NEEDS_POLL,
+	.tmio_ocr_mask	= MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
+	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT,
+};
+
+static struct resource sdhi0_resources[] = {
+	{
+		.name	= "SDHI0",
+		.start	= 0xe6850000,
+		.end	= 0xe6850100 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	/*
+	 * no SH_MOBILE_SDHI_IRQ_CARD_DETECT here
+	 */
+	{
+		.name	= SH_MOBILE_SDHI_IRQ_SDCARD,
+		.start	= evt2irq(0x0E20),
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.name	= SH_MOBILE_SDHI_IRQ_SDIO,
+		.start	= evt2irq(0x0E40),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sdhi0_device = {
+	.name		= "sh_mobile_sdhi",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &sdhi0_info,
+	},
+	.num_resources	= ARRAY_SIZE(sdhi0_resources),
+	.resource	= sdhi0_resources,
+};
+
+/* SDHI1 */
+static struct sh_mobile_sdhi_info sdhi1_info = {
+	.tmio_caps	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ,
+	.tmio_ocr_mask	= MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
+	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT,
+};
+
+static struct resource sdhi1_resources[] = {
+	[0] = {
+		.name	= "SDHI1",
+		.start	= 0xe6860000,
+		.end	= 0xe6860100 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0x0E80),
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= evt2irq(0x0EA0),
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start	= evt2irq(0x0EC0),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sdhi1_device = {
+	.name		= "sh_mobile_sdhi",
+	.id		= 1,
+	.dev		= {
+		.platform_data	= &sdhi1_info,
+	},
+	.num_resources	= ARRAY_SIZE(sdhi1_resources),
+	.resource	= sdhi1_resources,
+};
+
+/* MMCIF */
+static struct sh_mmcif_plat_data sh_mmcif_plat = {
+	.sup_pclk	= 0,
+	.ocr		= MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
+	.caps		= MMC_CAP_4_BIT_DATA |
+			  MMC_CAP_8_BIT_DATA |
+			  MMC_CAP_NONREMOVABLE,
+};
+
+static struct resource sh_mmcif_resources[] = {
+	[0] = {
+		.name	= "MMCIF",
+		.start	= 0xe6bd0000,
+		.end	= 0xe6bd0100 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* MMC ERR */
+		.start	= evt2irq(0x1AC0),
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* MMC NOR */
+		.start	= evt2irq(0x1AE0),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sh_mmcif_device = {
+	.name		= "sh_mmcif",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &sh_mmcif_plat,
+	},
+	.num_resources	= ARRAY_SIZE(sh_mmcif_resources),
+	.resource	= sh_mmcif_resources,
+};
+
+/* I2C */
+static struct i2c_board_info i2c0_devices[] = {
+	{
+		I2C_BOARD_INFO("st1232-ts", 0x55),
+		.irq = evt2irq(0x0340),
+	},
+};
+
+/*
+ * board devices
+ */
+static struct platform_device *eva_devices[] __initdata = {
+	&lcdc0_device,
+	&gpio_keys_device,
+	&sh_eth_device,
+	&sdhi0_device,
+	&sh_mmcif_device,
+};
+
+static void __init eva_clock_init(void)
+{
+	struct clk *system	= clk_get(NULL, "system_clk");
+	struct clk *xtal1	= clk_get(NULL, "extal1");
+	struct clk *usb24s	= clk_get(NULL, "usb24s");
+
+	if (IS_ERR(system)	||
+	    IS_ERR(xtal1)	||
+	    IS_ERR(usb24s)) {
+		pr_err("armadillo800eva board clock init failed\n");
+		goto clock_error;
+	}
+
+	/* armadillo 800 eva extal1 is 24MHz */
+	clk_set_rate(xtal1, 24000000);
+
+	/* usb24s use extal1 (= system) clock (= 24MHz) */
+	clk_set_parent(usb24s, system);
+
+clock_error:
+	if (!IS_ERR(system))
+		clk_put(system);
+	if (!IS_ERR(xtal1))
+		clk_put(xtal1);
+	if (!IS_ERR(usb24s))
+		clk_put(usb24s);
+}
+
+/*
+ * board init
+ */
+static void __init eva_init(void)
+{
+	eva_clock_init();
+
+	r8a7740_pinmux_init();
+
+	/* SCIFA1 */
+	gpio_request(GPIO_FN_SCIFA1_RXD, NULL);
+	gpio_request(GPIO_FN_SCIFA1_TXD, NULL);
+
+	/* LCDC0 */
+	gpio_request(GPIO_FN_LCDC0_SELECT,	NULL);
+	gpio_request(GPIO_FN_LCD0_D0,		NULL);
+	gpio_request(GPIO_FN_LCD0_D1,		NULL);
+	gpio_request(GPIO_FN_LCD0_D2,		NULL);
+	gpio_request(GPIO_FN_LCD0_D3,		NULL);
+	gpio_request(GPIO_FN_LCD0_D4,		NULL);
+	gpio_request(GPIO_FN_LCD0_D5,		NULL);
+	gpio_request(GPIO_FN_LCD0_D6,		NULL);
+	gpio_request(GPIO_FN_LCD0_D7,		NULL);
+	gpio_request(GPIO_FN_LCD0_D8,		NULL);
+	gpio_request(GPIO_FN_LCD0_D9,		NULL);
+	gpio_request(GPIO_FN_LCD0_D10,		NULL);
+	gpio_request(GPIO_FN_LCD0_D11,		NULL);
+	gpio_request(GPIO_FN_LCD0_D12,		NULL);
+	gpio_request(GPIO_FN_LCD0_D13,		NULL);
+	gpio_request(GPIO_FN_LCD0_D14,		NULL);
+	gpio_request(GPIO_FN_LCD0_D15,		NULL);
+	gpio_request(GPIO_FN_LCD0_D16,		NULL);
+	gpio_request(GPIO_FN_LCD0_D17,		NULL);
+	gpio_request(GPIO_FN_LCD0_D18_PORT40,	NULL);
+	gpio_request(GPIO_FN_LCD0_D19_PORT4,	NULL);
+	gpio_request(GPIO_FN_LCD0_D20_PORT3,	NULL);
+	gpio_request(GPIO_FN_LCD0_D21_PORT2,	NULL);
+	gpio_request(GPIO_FN_LCD0_D22_PORT0,	NULL);
+	gpio_request(GPIO_FN_LCD0_D23_PORT1,	NULL);
+	gpio_request(GPIO_FN_LCD0_DCK,		NULL);
+	gpio_request(GPIO_FN_LCD0_VSYN,		NULL);
+	gpio_request(GPIO_FN_LCD0_HSYN,		NULL);
+	gpio_request(GPIO_FN_LCD0_DISP,		NULL);
+	gpio_request(GPIO_FN_LCD0_LCLK_PORT165,	NULL);
+
+	gpio_request(GPIO_PORT61, NULL); /* LCDDON */
+	gpio_direction_output(GPIO_PORT61, 1);
+
+	gpio_request(GPIO_PORT202, NULL); /* LCD0_LED_CONT */
+	gpio_direction_output(GPIO_PORT202, 0);
+
+	/* Touchscreen */
+	gpio_request(GPIO_FN_IRQ10,	NULL); /* TP_INT */
+	gpio_request(GPIO_PORT166,	NULL); /* TP_RST_B */
+	gpio_direction_output(GPIO_PORT166, 1);
+
+	/* GETHER */
+	gpio_request(GPIO_FN_ET_CRS,		NULL);
+	gpio_request(GPIO_FN_ET_MDC,		NULL);
+	gpio_request(GPIO_FN_ET_MDIO,		NULL);
+	gpio_request(GPIO_FN_ET_TX_ER,		NULL);
+	gpio_request(GPIO_FN_ET_RX_ER,		NULL);
+	gpio_request(GPIO_FN_ET_ERXD0,		NULL);
+	gpio_request(GPIO_FN_ET_ERXD1,		NULL);
+	gpio_request(GPIO_FN_ET_ERXD2,		NULL);
+	gpio_request(GPIO_FN_ET_ERXD3,		NULL);
+	gpio_request(GPIO_FN_ET_TX_CLK,		NULL);
+	gpio_request(GPIO_FN_ET_TX_EN,		NULL);
+	gpio_request(GPIO_FN_ET_ETXD0,		NULL);
+	gpio_request(GPIO_FN_ET_ETXD1,		NULL);
+	gpio_request(GPIO_FN_ET_ETXD2,		NULL);
+	gpio_request(GPIO_FN_ET_ETXD3,		NULL);
+	gpio_request(GPIO_FN_ET_PHY_INT,	NULL);
+	gpio_request(GPIO_FN_ET_COL,		NULL);
+	gpio_request(GPIO_FN_ET_RX_DV,		NULL);
+	gpio_request(GPIO_FN_ET_RX_CLK,		NULL);
+
+	gpio_request(GPIO_PORT18, NULL); /* PHY_RST */
+	gpio_direction_output(GPIO_PORT18, 1);
+
+	/* USB */
+	gpio_request(GPIO_PORT159, NULL); /* USB_DEVICE_MODE */
+	gpio_direction_input(GPIO_PORT159);
+
+	if (gpio_get_value(GPIO_PORT159)) {
+		/* USB Host */
+	} else {
+		/* USB Func */
+		gpio_request(GPIO_FN_VBUS, NULL);
+		platform_device_register(&usbhsf_device);
+	}
+
+	/* SDHI0 */
+	gpio_request(GPIO_FN_SDHI0_CMD, NULL);
+	gpio_request(GPIO_FN_SDHI0_CLK, NULL);
+	gpio_request(GPIO_FN_SDHI0_D0, NULL);
+	gpio_request(GPIO_FN_SDHI0_D1, NULL);
+	gpio_request(GPIO_FN_SDHI0_D2, NULL);
+	gpio_request(GPIO_FN_SDHI0_D3, NULL);
+	gpio_request(GPIO_FN_SDHI0_WP, NULL);
+
+	gpio_request(GPIO_PORT17, NULL);	/* SDHI0_18/33_B */
+	gpio_request(GPIO_PORT74, NULL);	/* SDHI0_PON */
+	gpio_request(GPIO_PORT75, NULL);	/* SDSLOT1_PON */
+	gpio_direction_output(GPIO_PORT17, 0);
+	gpio_direction_output(GPIO_PORT74, 1);
+	gpio_direction_output(GPIO_PORT75, 1);
+
+	/* we can use GPIO_FN_IRQ31_PORT167 here for SDHI0 CD irq */
+
+	/*
+	 * MMCIF
+	 *
+	 * Here doesn't care SW1.4 status,
+	 * since CON2 is not mounted.
+	 */
+	gpio_request(GPIO_FN_MMC1_CLK_PORT103,	NULL);
+	gpio_request(GPIO_FN_MMC1_CMD_PORT104,	NULL);
+	gpio_request(GPIO_FN_MMC1_D0_PORT149,	NULL);
+	gpio_request(GPIO_FN_MMC1_D1_PORT148,	NULL);
+	gpio_request(GPIO_FN_MMC1_D2_PORT147,	NULL);
+	gpio_request(GPIO_FN_MMC1_D3_PORT146,	NULL);
+	gpio_request(GPIO_FN_MMC1_D4_PORT145,	NULL);
+	gpio_request(GPIO_FN_MMC1_D5_PORT144,	NULL);
+	gpio_request(GPIO_FN_MMC1_D6_PORT143,	NULL);
+	gpio_request(GPIO_FN_MMC1_D7_PORT142,	NULL);
+
+	/*
+	 * CAUTION
+	 *
+	 * DBGMD/LCDC0/FSIA MUX
+	 * DBGMD_SELECT_B should be set after setting PFC Function.
+	 */
+	gpio_request(GPIO_PORT176, NULL);
+	gpio_direction_output(GPIO_PORT176, 1);
+
+	/*
+	 * We can switch CON8/CON14 by SW1.5,
+	 * but it needs after DBGMD_SELECT_B
+	 */
+	gpio_request(GPIO_PORT6, NULL);
+	gpio_direction_input(GPIO_PORT6);
+	if (gpio_get_value(GPIO_PORT6)) {
+		/* CON14 enable */
+	} else {
+		/* CON8 (SDHI1) enable */
+		gpio_request(GPIO_FN_SDHI1_CLK,	NULL);
+		gpio_request(GPIO_FN_SDHI1_CMD,	NULL);
+		gpio_request(GPIO_FN_SDHI1_D0,	NULL);
+		gpio_request(GPIO_FN_SDHI1_D1,	NULL);
+		gpio_request(GPIO_FN_SDHI1_D2,	NULL);
+		gpio_request(GPIO_FN_SDHI1_D3,	NULL);
+		gpio_request(GPIO_FN_SDHI1_CD,	NULL);
+		gpio_request(GPIO_FN_SDHI1_WP,	NULL);
+
+		gpio_request(GPIO_PORT16, NULL); /* SDSLOT2_PON */
+		gpio_direction_output(GPIO_PORT16, 1);
+
+		platform_device_register(&sdhi1_device);
+	}
+
+
+#ifdef CONFIG_CACHE_L2X0
+	/* Early BRESP enable, Shared attribute override enable, 32K*8way */
+	l2x0_init(__io(0xf0002000), 0x40440000, 0x82000fff);
+#endif
+
+	i2c_register_board_info(0, i2c0_devices, ARRAY_SIZE(i2c0_devices));
+
+	r8a7740_add_standard_devices();
+
+	platform_add_devices(eva_devices,
+			     ARRAY_SIZE(eva_devices));
+}
+
+static void __init eva_earlytimer_init(void)
+{
+	r8a7740_clock_init(MD_CK0 | MD_CK2);
+	shmobile_earlytimer_init();
+}
+
+static void __init eva_add_early_devices(void)
+{
+	r8a7740_add_early_devices();
+
+	/* override timer setup with board-specific code */
+	shmobile_timer.init = eva_earlytimer_init;
+}
+
+static const char *eva_boards_compat_dt[] __initdata = {
+	"renesas,armadillo800eva",
+	NULL,
+};
+
+DT_MACHINE_START(ARMADILLO800EVA_DT, "armadillo800eva")
+	.map_io		= r8a7740_map_io,
+	.init_early	= eva_add_early_devices,
+	.init_irq	= r8a7740_init_irq,
+	.handle_irq	= shmobile_handle_irq_intc,
+	.init_machine	= eva_init,
+	.timer		= &shmobile_timer,
+	.dt_compat	= eva_boards_compat_dt,
+MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-bonito.c b/arch/arm/mach-shmobile/board-bonito.c
index 81fd95f7f52a..e9b32cfbf741 100644
--- a/arch/arm/mach-shmobile/board-bonito.c
+++ b/arch/arm/mach-shmobile/board-bonito.c
@@ -486,7 +486,7 @@ static void __init bonito_earlytimer_init(void)
 	shmobile_earlytimer_init();
 }
 
-void __init bonito_add_early_devices(void)
+static void __init bonito_add_early_devices(void)
 {
 	r8a7740_add_early_devices();
 
@@ -500,5 +500,6 @@ MACHINE_START(BONITO, "bonito")
 	.init_irq	= r8a7740_init_irq,
 	.handle_irq	= shmobile_handle_irq_intc,
 	.init_machine	= bonito_init,
+	.init_late	= shmobile_init_late,
 	.timer		= &shmobile_timer,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-g3evm.c b/arch/arm/mach-shmobile/board-g3evm.c
index 39b6cf85ced6..796fa00ad3c4 100644
--- a/arch/arm/mach-shmobile/board-g3evm.c
+++ b/arch/arm/mach-shmobile/board-g3evm.c
@@ -338,5 +338,6 @@ MACHINE_START(G3EVM, "g3evm")
 	.init_irq	= sh7367_init_irq,
 	.handle_irq	= shmobile_handle_irq_intc,
 	.init_machine	= g3evm_init,
+	.init_late	= shmobile_init_late,
 	.timer		= &shmobile_timer,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-g4evm.c b/arch/arm/mach-shmobile/board-g4evm.c
index 0e5a39c670bc..f1257321999a 100644
--- a/arch/arm/mach-shmobile/board-g4evm.c
+++ b/arch/arm/mach-shmobile/board-g4evm.c
@@ -381,5 +381,6 @@ MACHINE_START(G4EVM, "g4evm")
 	.init_irq	= sh7377_init_irq,
 	.handle_irq	= shmobile_handle_irq_intc,
 	.init_machine	= g4evm_init,
+	.init_late	= shmobile_init_late,
 	.timer		= &shmobile_timer,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c
index 200dcd42a3a0..f60f1b281cc4 100644
--- a/arch/arm/mach-shmobile/board-kota2.c
+++ b/arch/arm/mach-shmobile/board-kota2.c
@@ -521,5 +521,6 @@ MACHINE_START(KOTA2, "kota2")
 	.init_irq	= sh73a0_init_irq,
 	.handle_irq	= gic_handle_irq,
 	.init_machine	= kota2_init,
+	.init_late	= shmobile_init_late,
 	.timer		= &shmobile_timer,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-kzm9d.c b/arch/arm/mach-shmobile/board-kzm9d.c
new file mode 100644
index 000000000000..7bc5e7d39f9b
--- /dev/null
+++ b/arch/arm/mach-shmobile/board-kzm9d.c
@@ -0,0 +1,85 @@
+/*
+ * kzm9d board support
+ *
+ * Copyright (C) 2012  Renesas Solutions Corp.
+ * Copyright (C) 2012  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/smsc911x.h>
+#include <mach/common.h>
+#include <mach/emev2.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
+
+/* Ether */
+static struct resource smsc911x_resources[] = {
+	[0] = {
+		.start	= 0x20000000,
+		.end	= 0x2000ffff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= EMEV2_GPIO_IRQ(1),
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
+	},
+};
+
+static struct smsc911x_platform_config smsc911x_platdata = {
+	.flags		= SMSC911X_USE_32BIT,
+	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
+};
+
+static struct platform_device smsc91x_device = {
+	.name	= "smsc911x",
+	.id	= 0,
+	.dev	= {
+		  .platform_data = &smsc911x_platdata,
+		},
+	.num_resources	= ARRAY_SIZE(smsc911x_resources),
+	.resource	= smsc911x_resources,
+};
+
+static struct platform_device *kzm9d_devices[] __initdata = {
+	&smsc91x_device,
+};
+
+void __init kzm9d_add_standard_devices(void)
+{
+	emev2_add_standard_devices();
+
+	platform_add_devices(kzm9d_devices, ARRAY_SIZE(kzm9d_devices));
+}
+
+static const char *kzm9d_boards_compat_dt[] __initdata = {
+	"renesas,kzm9d",
+	NULL,
+};
+
+DT_MACHINE_START(KZM9D_DT, "kzm9d")
+	.map_io		= emev2_map_io,
+	.init_early	= emev2_add_early_devices,
+	.nr_irqs	= NR_IRQS_LEGACY,
+	.init_irq	= emev2_init_irq,
+	.handle_irq	= gic_handle_irq,
+	.init_machine	= kzm9d_add_standard_devices,
+	.timer		= &shmobile_timer,
+	.dt_compat	= kzm9d_boards_compat_dt,
+MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c
new file mode 100644
index 000000000000..d8e33b682832
--- /dev/null
+++ b/arch/arm/mach-shmobile/board-kzm9g.c
@@ -0,0 +1,460 @@
+/*
+ * KZM-A9-GT board support
+ *
+ * Copyright (C) 2012	Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/i2c.h>
+#include <linux/i2c/pcf857x.h>
+#include <linux/input.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/sh_mmcif.h>
+#include <linux/mmc/sh_mobile_sdhi.h>
+#include <linux/mfd/tmio.h>
+#include <linux/platform_device.h>
+#include <linux/smsc911x.h>
+#include <linux/usb/r8a66597.h>
+#include <linux/videodev2.h>
+#include <mach/irqs.h>
+#include <mach/sh73a0.h>
+#include <mach/common.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/hardware/gic.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <video/sh_mobile_lcdc.h>
+
+/*
+ * external GPIO
+ */
+#define GPIO_PCF8575_BASE	(GPIO_NR)
+#define GPIO_PCF8575_PORT10	(GPIO_NR + 8)
+#define GPIO_PCF8575_PORT11	(GPIO_NR + 9)
+#define GPIO_PCF8575_PORT12	(GPIO_NR + 10)
+#define GPIO_PCF8575_PORT13	(GPIO_NR + 11)
+#define GPIO_PCF8575_PORT14	(GPIO_NR + 12)
+#define GPIO_PCF8575_PORT15	(GPIO_NR + 13)
+#define GPIO_PCF8575_PORT16	(GPIO_NR + 14)
+
+/* SMSC 9221 */
+static struct resource smsc9221_resources[] = {
+	[0] = {
+		.start	= 0x10000000, /* CS4 */
+		.end	= 0x100000ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= intcs_evt2irq(0x260), /* IRQ3 */
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct smsc911x_platform_config smsc9221_platdata = {
+	.flags		= SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
+};
+
+static struct platform_device smsc_device = {
+	.name		= "smsc911x",
+	.dev  = {
+		.platform_data = &smsc9221_platdata,
+	},
+	.resource	= smsc9221_resources,
+	.num_resources	= ARRAY_SIZE(smsc9221_resources),
+};
+
+/* USB external chip */
+static struct r8a66597_platdata usb_host_data = {
+	.on_chip	= 0,
+	.xtal		= R8A66597_PLATDATA_XTAL_48MHZ,
+};
+
+static struct resource usb_resources[] = {
+	[0] = {
+		.start	= 0x10010000,
+		.end	= 0x1001ffff - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= intcs_evt2irq(0x220), /* IRQ1 */
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device usb_host_device = {
+	.name	= "r8a66597_hcd",
+	.dev = {
+		.platform_data		= &usb_host_data,
+		.dma_mask		= NULL,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(usb_resources),
+	.resource	= usb_resources,
+};
+
+/* LCDC */
+static struct fb_videomode kzm_lcdc_mode = {
+	.name		= "WVGA Panel",
+	.xres		= 800,
+	.yres		= 480,
+	.left_margin	= 220,
+	.right_margin	= 110,
+	.hsync_len	= 70,
+	.upper_margin	= 20,
+	.lower_margin	= 5,
+	.vsync_len	= 5,
+	.sync		= 0,
+};
+
+static struct sh_mobile_lcdc_info lcdc_info = {
+	.clock_source = LCDC_CLK_BUS,
+	.ch[0] = {
+		.chan		= LCDC_CHAN_MAINLCD,
+		.fourcc		= V4L2_PIX_FMT_RGB565,
+		.interface_type	= RGB24,
+		.lcd_modes	= &kzm_lcdc_mode,
+		.num_modes	= 1,
+		.clock_divider	= 5,
+		.flags		= 0,
+		.panel_cfg = {
+			.width	= 152,
+			.height	= 91,
+		},
+	}
+};
+
+static struct resource lcdc_resources[] = {
+	[0] = {
+		.name	= "LCDC",
+		.start	= 0xfe940000,
+		.end	= 0xfe943fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= intcs_evt2irq(0x580),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device lcdc_device = {
+	.name		= "sh_mobile_lcdc_fb",
+	.num_resources	= ARRAY_SIZE(lcdc_resources),
+	.resource	= lcdc_resources,
+	.dev	= {
+		.platform_data	= &lcdc_info,
+		.coherent_dma_mask = ~0,
+	},
+};
+
+/* MMCIF */
+static struct resource sh_mmcif_resources[] = {
+	[0] = {
+		.name	= "MMCIF",
+		.start	= 0xe6bd0000,
+		.end	= 0xe6bd00ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gic_spi(141),
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= gic_spi(140),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct sh_mmcif_plat_data sh_mmcif_platdata = {
+	.ocr		= MMC_VDD_165_195,
+	.caps		= MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
+};
+
+static struct platform_device mmc_device = {
+	.name		= "sh_mmcif",
+	.dev		= {
+		.dma_mask		= NULL,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &sh_mmcif_platdata,
+	},
+	.num_resources	= ARRAY_SIZE(sh_mmcif_resources),
+	.resource	= sh_mmcif_resources,
+};
+
+/* SDHI */
+static struct sh_mobile_sdhi_info sdhi0_info = {
+	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT,
+	.tmio_caps	= MMC_CAP_SD_HIGHSPEED,
+	.tmio_ocr_mask	= MMC_VDD_27_28 | MMC_VDD_28_29,
+};
+
+static struct resource sdhi0_resources[] = {
+	[0] = {
+		.name	= "SDHI0",
+		.start	= 0xee100000,
+		.end	= 0xee1000ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.name	= SH_MOBILE_SDHI_IRQ_CARD_DETECT,
+		.start	= gic_spi(83),
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.name	= SH_MOBILE_SDHI_IRQ_SDCARD,
+		.start	= gic_spi(84),
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] = {
+		.name	= SH_MOBILE_SDHI_IRQ_SDIO,
+		.start	= gic_spi(85),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sdhi0_device = {
+	.name		= "sh_mobile_sdhi",
+	.num_resources	= ARRAY_SIZE(sdhi0_resources),
+	.resource	= sdhi0_resources,
+	.dev	= {
+		.platform_data	= &sdhi0_info,
+	},
+};
+
+/* KEY */
+#define GPIO_KEY(c, g, d) { .code = c, .gpio = g, .desc = d, .active_low = 1 }
+
+static struct gpio_keys_button gpio_buttons[] = {
+	GPIO_KEY(KEY_BACK,	GPIO_PCF8575_PORT10,	"SW3"),
+	GPIO_KEY(KEY_RIGHT,	GPIO_PCF8575_PORT11,	"SW2-R"),
+	GPIO_KEY(KEY_LEFT,	GPIO_PCF8575_PORT12,	"SW2-L"),
+	GPIO_KEY(KEY_ENTER,	GPIO_PCF8575_PORT13,	"SW2-P"),
+	GPIO_KEY(KEY_UP,	GPIO_PCF8575_PORT14,	"SW2-U"),
+	GPIO_KEY(KEY_DOWN,	GPIO_PCF8575_PORT15,	"SW2-D"),
+	GPIO_KEY(KEY_HOME,	GPIO_PCF8575_PORT16,	"SW1"),
+};
+
+static struct gpio_keys_platform_data gpio_key_info = {
+	.buttons	= gpio_buttons,
+	.nbuttons	= ARRAY_SIZE(gpio_buttons),
+	.poll_interval	= 250, /* poling at this point */
+};
+
+static struct platform_device gpio_keys_device = {
+	/* gpio-pcf857x.c driver doesn't support gpio_to_irq() */
+	.name	= "gpio-keys-polled",
+	.dev	= {
+		.platform_data  = &gpio_key_info,
+	},
+};
+
+/* I2C */
+static struct pcf857x_platform_data pcf8575_pdata = {
+	.gpio_base	= GPIO_PCF8575_BASE,
+};
+
+static struct i2c_board_info i2c1_devices[] = {
+	{
+		I2C_BOARD_INFO("st1232-ts", 0x55),
+		.irq = intcs_evt2irq(0x300), /* IRQ8 */
+	},
+};
+
+static struct i2c_board_info i2c3_devices[] = {
+	{
+		I2C_BOARD_INFO("pcf8575", 0x20),
+		.platform_data = &pcf8575_pdata,
+	},
+};
+
+static struct platform_device *kzm_devices[] __initdata = {
+	&smsc_device,
+	&usb_host_device,
+	&lcdc_device,
+	&mmc_device,
+	&sdhi0_device,
+	&gpio_keys_device,
+};
+
+/*
+ * FIXME
+ *
+ * This is quick hack for enabling LCDC backlight
+ */
+static int __init as3711_enable_lcdc_backlight(void)
+{
+	struct i2c_adapter *a = i2c_get_adapter(0);
+	struct i2c_msg msg;
+	int i, ret;
+	__u8 magic[] = {
+		0x40, 0x2a,
+		0x43, 0x3c,
+		0x44, 0x3c,
+		0x45, 0x3c,
+		0x54, 0x03,
+		0x51, 0x00,
+		0x51, 0x01,
+		0xff, 0x00, /* wait */
+		0x43, 0xf0,
+		0x44, 0xf0,
+		0x45, 0xf0,
+	};
+
+	if (!machine_is_kzm9g())
+		return 0;
+
+	if (!a)
+		return 0;
+
+	msg.addr	= 0x40;
+	msg.len		= 2;
+	msg.flags	= 0;
+
+	for (i = 0; i < ARRAY_SIZE(magic); i += 2) {
+		msg.buf = magic + i;
+
+		if (0xff == msg.buf[0]) {
+			udelay(500);
+			continue;
+		}
+
+		ret = i2c_transfer(a, &msg, 1);
+		if (ret < 0) {
+			pr_err("i2c transfer fail\n");
+			break;
+		}
+	}
+
+	return 0;
+}
+device_initcall(as3711_enable_lcdc_backlight);
+
+static void __init kzm_init(void)
+{
+	sh73a0_pinmux_init();
+
+	/* enable SCIFA4 */
+	gpio_request(GPIO_FN_SCIFA4_TXD, NULL);
+	gpio_request(GPIO_FN_SCIFA4_RXD, NULL);
+	gpio_request(GPIO_FN_SCIFA4_RTS_, NULL);
+	gpio_request(GPIO_FN_SCIFA4_CTS_, NULL);
+
+	/* CS4 for SMSC/USB */
+	gpio_request(GPIO_FN_CS4_, NULL); /* CS4 */
+
+	/* SMSC */
+	gpio_request(GPIO_PORT224, NULL); /* IRQ3 */
+	gpio_direction_input(GPIO_PORT224);
+
+	/* LCDC */
+	gpio_request(GPIO_FN_LCDD23,	NULL);
+	gpio_request(GPIO_FN_LCDD22,	NULL);
+	gpio_request(GPIO_FN_LCDD21,	NULL);
+	gpio_request(GPIO_FN_LCDD20,	NULL);
+	gpio_request(GPIO_FN_LCDD19,	NULL);
+	gpio_request(GPIO_FN_LCDD18,	NULL);
+	gpio_request(GPIO_FN_LCDD17,	NULL);
+	gpio_request(GPIO_FN_LCDD16,	NULL);
+	gpio_request(GPIO_FN_LCDD15,	NULL);
+	gpio_request(GPIO_FN_LCDD14,	NULL);
+	gpio_request(GPIO_FN_LCDD13,	NULL);
+	gpio_request(GPIO_FN_LCDD12,	NULL);
+	gpio_request(GPIO_FN_LCDD11,	NULL);
+	gpio_request(GPIO_FN_LCDD10,	NULL);
+	gpio_request(GPIO_FN_LCDD9,	NULL);
+	gpio_request(GPIO_FN_LCDD8,	NULL);
+	gpio_request(GPIO_FN_LCDD7,	NULL);
+	gpio_request(GPIO_FN_LCDD6,	NULL);
+	gpio_request(GPIO_FN_LCDD5,	NULL);
+	gpio_request(GPIO_FN_LCDD4,	NULL);
+	gpio_request(GPIO_FN_LCDD3,	NULL);
+	gpio_request(GPIO_FN_LCDD2,	NULL);
+	gpio_request(GPIO_FN_LCDD1,	NULL);
+	gpio_request(GPIO_FN_LCDD0,	NULL);
+	gpio_request(GPIO_FN_LCDDISP,	NULL);
+	gpio_request(GPIO_FN_LCDDCK,	NULL);
+
+	gpio_request(GPIO_PORT222,	NULL); /* LCDCDON */
+	gpio_request(GPIO_PORT226,	NULL); /* SC */
+	gpio_direction_output(GPIO_PORT222, 1);
+	gpio_direction_output(GPIO_PORT226, 1);
+
+	/* Touchscreen */
+	gpio_request(GPIO_PORT223, NULL); /* IRQ8 */
+	gpio_direction_input(GPIO_PORT223);
+
+	/* enable MMCIF */
+	gpio_request(GPIO_FN_MMCCLK0,		NULL);
+	gpio_request(GPIO_FN_MMCCMD0_PU,	NULL);
+	gpio_request(GPIO_FN_MMCD0_0_PU,	NULL);
+	gpio_request(GPIO_FN_MMCD0_1_PU,	NULL);
+	gpio_request(GPIO_FN_MMCD0_2_PU,	NULL);
+	gpio_request(GPIO_FN_MMCD0_3_PU,	NULL);
+	gpio_request(GPIO_FN_MMCD0_4_PU,	NULL);
+	gpio_request(GPIO_FN_MMCD0_5_PU,	NULL);
+	gpio_request(GPIO_FN_MMCD0_6_PU,	NULL);
+	gpio_request(GPIO_FN_MMCD0_7_PU,	NULL);
+
+	/* enable SD */
+	gpio_request(GPIO_FN_SDHIWP0,		NULL);
+	gpio_request(GPIO_FN_SDHICD0,		NULL);
+	gpio_request(GPIO_FN_SDHICMD0,		NULL);
+	gpio_request(GPIO_FN_SDHICLK0,		NULL);
+	gpio_request(GPIO_FN_SDHID0_3,		NULL);
+	gpio_request(GPIO_FN_SDHID0_2,		NULL);
+	gpio_request(GPIO_FN_SDHID0_1,		NULL);
+	gpio_request(GPIO_FN_SDHID0_0,		NULL);
+	gpio_request(GPIO_FN_SDHI0_VCCQ_MC0_ON,	NULL);
+	gpio_request(GPIO_PORT15, NULL);
+	gpio_direction_output(GPIO_PORT15, 1); /* power */
+
+	/* I2C 3 */
+	gpio_request(GPIO_FN_PORT27_I2C_SCL3, NULL);
+	gpio_request(GPIO_FN_PORT28_I2C_SDA3, NULL);
+
+#ifdef CONFIG_CACHE_L2X0
+	/* Early BRESP enable, Shared attribute override enable, 64K*8way */
+	l2x0_init(IOMEM(0xf0100000), 0x40460000, 0x82000fff);
+#endif
+
+	i2c_register_board_info(1, i2c1_devices, ARRAY_SIZE(i2c1_devices));
+	i2c_register_board_info(3, i2c3_devices, ARRAY_SIZE(i2c3_devices));
+
+	sh73a0_add_standard_devices();
+	platform_add_devices(kzm_devices, ARRAY_SIZE(kzm_devices));
+}
+
+static const char *kzm9g_boards_compat_dt[] __initdata = {
+	"renesas,kzm9g",
+	NULL,
+};
+
+DT_MACHINE_START(KZM9G_DT, "kzm9g")
+	.map_io		= sh73a0_map_io,
+	.init_early	= sh73a0_add_early_devices,
+	.nr_irqs	= NR_IRQS_LEGACY,
+	.init_irq	= sh73a0_init_irq,
+	.handle_irq	= gic_handle_irq,
+	.init_machine	= kzm_init,
+	.timer		= &shmobile_timer,
+	.dt_compat	= kzm9g_boards_compat_dt,
+MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index f49e28abe0ab..b577f7c44678 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -53,6 +53,7 @@
 #include <media/soc_camera.h>
 #include <media/soc_camera_platform.h>
 #include <sound/sh_fsi.h>
+#include <sound/simple_card.h>
 
 #include <mach/common.h>
 #include <mach/irqs.h>
@@ -502,8 +503,26 @@ static struct platform_device hdmi_lcdc_device = {
 	},
 };
 
+static struct asoc_simple_dai_init_info fsi2_hdmi_init_info = {
+	.cpu_daifmt	= SND_SOC_DAIFMT_CBM_CFM,
+};
+
+static struct asoc_simple_card_info fsi2_hdmi_info = {
+	.name		= "HDMI",
+	.card		= "FSI2B-HDMI",
+	.cpu_dai	= "fsib-dai",
+	.codec		= "sh-mobile-hdmi",
+	.platform	= "sh_fsi2",
+	.codec_dai	= "sh_mobile_hdmi-hifi",
+	.init		= &fsi2_hdmi_init_info,
+};
+
 static struct platform_device fsi_hdmi_device = {
-	.name		= "sh_fsi2_b_hdmi",
+	.name	= "asoc-simple-card",
+	.id	= 1,
+	.dev	= {
+		.platform_data	= &fsi2_hdmi_info,
+	},
 };
 
 static void __init hdmi_init_pm_clock(void)
@@ -908,6 +927,8 @@ fsi_set_rate_end:
 static struct sh_fsi_platform_info fsi_info = {
 	.port_a = {
 		.flags = SH_FSI_BRS_INV,
+		.tx_id = SHDMA_SLAVE_FSIA_TX,
+		.rx_id = SHDMA_SLAVE_FSIA_RX,
 	},
 	.port_b = {
 		.flags = SH_FSI_BRS_INV	|
@@ -920,9 +941,11 @@ static struct sh_fsi_platform_info fsi_info = {
 
 static struct resource fsi_resources[] = {
 	[0] = {
+		/* we need 0xFE1F0000 to access DMA
+		 * instead of 0xFE3C0000 */
 		.name	= "FSI",
-		.start	= 0xFE3C0000,
-		.end	= 0xFE3C0400 - 1,
+		.start  = 0xFE1F0000,
+		.end    = 0xFE1F0400 - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -941,17 +964,25 @@ static struct platform_device fsi_device = {
 	},
 };
 
-static struct fsi_ak4642_info fsi2_ak4643_info = {
+static struct asoc_simple_dai_init_info fsi2_ak4643_init_info = {
+	.fmt		= SND_SOC_DAIFMT_LEFT_J,
+	.codec_daifmt	= SND_SOC_DAIFMT_CBM_CFM,
+	.cpu_daifmt	= SND_SOC_DAIFMT_CBS_CFS,
+	.sysclk		= 11289600,
+};
+
+static struct asoc_simple_card_info fsi2_ak4643_info = {
 	.name		= "AK4643",
 	.card		= "FSI2A-AK4643",
 	.cpu_dai	= "fsia-dai",
 	.codec		= "ak4642-codec.0-0013",
 	.platform	= "sh_fsi2",
-	.id		= FSI_PORT_A,
+	.codec_dai	= "ak4642-hifi",
+	.init		= &fsi2_ak4643_init_info,
 };
 
 static struct platform_device fsi_ak4643_device = {
-	.name	= "fsi-ak4642-audio",
+	.name	= "asoc-simple-card",
 	.dev	= {
 		.platform_data	= &fsi2_ak4643_info,
 	},
@@ -1011,21 +1042,12 @@ static int slot_cn7_get_cd(struct platform_device *pdev)
 }
 
 /* SDHI0 */
-static irqreturn_t mackerel_sdhi0_gpio_cd(int irq, void *arg)
-{
-	struct device *dev = arg;
-	struct sh_mobile_sdhi_info *info = dev->platform_data;
-	struct tmio_mmc_data *pdata = info->pdata;
-
-	tmio_mmc_cd_wakeup(pdata);
-
-	return IRQ_HANDLED;
-}
-
 static struct sh_mobile_sdhi_info sdhi0_info = {
 	.dma_slave_tx	= SHDMA_SLAVE_SDHI0_TX,
 	.dma_slave_rx	= SHDMA_SLAVE_SDHI0_RX,
+	.tmio_flags	= TMIO_MMC_USE_GPIO_CD,
 	.tmio_caps	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ,
+	.cd_gpio	= GPIO_PORT172,
 };
 
 static struct resource sdhi0_resources[] = {
@@ -1257,6 +1279,8 @@ static void mackerel_camera_del(struct soc_camera_device *icd)
 
 static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
 	.flags = SH_CEU_FLAG_USE_8BIT_BUS,
+	.max_width = 8188,
+	.max_height = 8188,
 };
 
 static struct resource ceu_resources[] = {
@@ -1384,7 +1408,6 @@ static void __init mackerel_init(void)
 {
 	u32 srcr4;
 	struct clk *clk;
-	int ret;
 
 	/* External clock source */
 	clk_set_rate(&sh7372_dv_clki_clk, 27000000);
@@ -1481,7 +1504,6 @@ static void __init mackerel_init(void)
 	irq_set_irq_type(IRQ21, IRQ_TYPE_LEVEL_HIGH);
 
 	/* enable SDHI0 */
-	gpio_request(GPIO_FN_SDHICD0, NULL);
 	gpio_request(GPIO_FN_SDHIWP0, NULL);
 	gpio_request(GPIO_FN_SDHICMD0, NULL);
 	gpio_request(GPIO_FN_SDHICLK0, NULL);
@@ -1490,13 +1512,6 @@ static void __init mackerel_init(void)
 	gpio_request(GPIO_FN_SDHID0_1, NULL);
 	gpio_request(GPIO_FN_SDHID0_0, NULL);
 
-	ret = request_irq(evt2irq(0x3340), mackerel_sdhi0_gpio_cd,
-			  IRQF_TRIGGER_FALLING, "sdhi0 cd", &sdhi0_device.dev);
-	if (!ret)
-		sdhi0_info.tmio_flags |= TMIO_MMC_HAS_COLD_CD;
-	else
-		pr_err("Cannot get IRQ #%d: %d\n", evt2irq(0x3340), ret);
-
 #if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
 	/* enable SDHI1 */
 	gpio_request(GPIO_FN_SDHICMD1, NULL);
@@ -1623,5 +1638,6 @@ MACHINE_START(MACKEREL, "mackerel")
 	.init_irq	= sh7372_init_irq,
 	.handle_irq	= shmobile_handle_irq_intc,
 	.init_machine	= mackerel_init,
+	.init_late	= shmobile_init_late,
 	.timer		= &shmobile_timer,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c
index ef0e13bf0b3a..14de3787cafc 100644
--- a/arch/arm/mach-shmobile/board-marzen.c
+++ b/arch/arm/mach-shmobile/board-marzen.c
@@ -98,5 +98,6 @@ MACHINE_START(MARZEN, "marzen")
 	.init_irq	= r8a7779_init_irq,
 	.handle_irq	= gic_handle_irq,
 	.init_machine	= marzen_init,
+	.init_late	= shmobile_init_late,
 	.timer		= &shmobile_timer,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/clock-emev2.c b/arch/arm/mach-shmobile/clock-emev2.c
new file mode 100644
index 000000000000..4710f1847bb7
--- /dev/null
+++ b/arch/arm/mach-shmobile/clock-emev2.c
@@ -0,0 +1,249 @@
+/*
+ * Emma Mobile EV2 clock framework support
+ *
+ * Copyright (C) 2012  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/sh_clk.h>
+#include <linux/clkdev.h>
+#include <mach/common.h>
+
+#define EMEV2_SMU_BASE 0xe0110000
+
+/* EMEV2 SMU registers */
+#define USIAU0_RSTCTRL 0x094
+#define USIBU1_RSTCTRL 0x0ac
+#define USIBU2_RSTCTRL 0x0b0
+#define USIBU3_RSTCTRL 0x0b4
+#define STI_RSTCTRL 0x124
+#define USIAU0GCLKCTRL 0x4a0
+#define USIBU1GCLKCTRL 0x4b8
+#define USIBU2GCLKCTRL 0x4bc
+#define USIBU3GCLKCTRL 0x04c0
+#define STIGCLKCTRL 0x528
+#define USIAU0SCLKDIV 0x61c
+#define USIB2SCLKDIV 0x65c
+#define USIB3SCLKDIV 0x660
+#define STI_CLKSEL 0x688
+#define SMU_GENERAL_REG0 0x7c0
+
+/* not pretty, but hey */
+static void __iomem *smu_base;
+
+static void emev2_smu_write(unsigned long value, int offs)
+{
+	BUG_ON(!smu_base || (offs >= PAGE_SIZE));
+	iowrite32(value, smu_base + offs);
+}
+
+void emev2_set_boot_vector(unsigned long value)
+{
+	emev2_smu_write(value, SMU_GENERAL_REG0);
+}
+
+static struct clk_mapping smu_mapping = {
+	.phys	= EMEV2_SMU_BASE,
+	.len	= PAGE_SIZE,
+};
+
+/* Fixed 32 KHz root clock from C32K pin */
+static struct clk c32k_clk = {
+	.rate           = 32768,
+	.mapping	= &smu_mapping,
+};
+
+/* PLL3 multiplies C32K with 7000 */
+static unsigned long pll3_recalc(struct clk *clk)
+{
+	return clk->parent->rate * 7000;
+}
+
+static struct sh_clk_ops pll3_clk_ops = {
+	.recalc		= pll3_recalc,
+};
+
+static struct clk pll3_clk = {
+	.ops		= &pll3_clk_ops,
+	.parent		= &c32k_clk,
+};
+
+static struct clk *main_clks[] = {
+	&c32k_clk,
+	&pll3_clk,
+};
+
+enum { SCLKDIV_USIAU0, SCLKDIV_USIBU2, SCLKDIV_USIBU1, SCLKDIV_USIBU3,
+	SCLKDIV_NR };
+
+#define SCLKDIV(_reg, _shift)			\
+{								\
+	.parent		= &pll3_clk,				\
+	.enable_reg	= IOMEM(EMEV2_SMU_BASE + (_reg)),	\
+	.enable_bit	= _shift,				\
+}
+
+static struct clk sclkdiv_clks[SCLKDIV_NR] = {
+	[SCLKDIV_USIAU0] = SCLKDIV(USIAU0SCLKDIV, 0),
+	[SCLKDIV_USIBU2] = SCLKDIV(USIB2SCLKDIV, 16),
+	[SCLKDIV_USIBU1] = SCLKDIV(USIB2SCLKDIV, 0),
+	[SCLKDIV_USIBU3] = SCLKDIV(USIB3SCLKDIV, 0),
+};
+
+enum { GCLK_USIAU0_SCLK, GCLK_USIBU1_SCLK, GCLK_USIBU2_SCLK, GCLK_USIBU3_SCLK,
+	GCLK_STI_SCLK,
+	GCLK_NR };
+
+#define GCLK_SCLK(_parent, _reg) \
+{								\
+	.parent		= _parent,				\
+	.enable_reg	= IOMEM(EMEV2_SMU_BASE + (_reg)),	\
+	.enable_bit	= 1, /* SCLK_GCC */			\
+}
+
+static struct clk gclk_clks[GCLK_NR] = {
+	[GCLK_USIAU0_SCLK] = GCLK_SCLK(&sclkdiv_clks[SCLKDIV_USIAU0],
+				       USIAU0GCLKCTRL),
+	[GCLK_USIBU1_SCLK] = GCLK_SCLK(&sclkdiv_clks[SCLKDIV_USIBU1],
+				       USIBU1GCLKCTRL),
+	[GCLK_USIBU2_SCLK] = GCLK_SCLK(&sclkdiv_clks[SCLKDIV_USIBU2],
+				       USIBU2GCLKCTRL),
+	[GCLK_USIBU3_SCLK] = GCLK_SCLK(&sclkdiv_clks[SCLKDIV_USIBU3],
+				       USIBU3GCLKCTRL),
+	[GCLK_STI_SCLK] = GCLK_SCLK(&c32k_clk, STIGCLKCTRL),
+};
+
+static int emev2_gclk_enable(struct clk *clk)
+{
+	iowrite32(ioread32(clk->mapped_reg) | (1 << clk->enable_bit),
+		  clk->mapped_reg);
+	return 0;
+}
+
+static void emev2_gclk_disable(struct clk *clk)
+{
+	iowrite32(ioread32(clk->mapped_reg) & ~(1 << clk->enable_bit),
+		  clk->mapped_reg);
+}
+
+static struct sh_clk_ops emev2_gclk_clk_ops = {
+	.enable		= emev2_gclk_enable,
+	.disable	= emev2_gclk_disable,
+	.recalc		= followparent_recalc,
+};
+
+static int __init emev2_gclk_register(struct clk *clks, int nr)
+{
+	struct clk *clkp;
+	int ret = 0;
+	int k;
+
+	for (k = 0; !ret && (k < nr); k++) {
+		clkp = clks + k;
+		clkp->ops = &emev2_gclk_clk_ops;
+		ret |= clk_register(clkp);
+	}
+
+	return ret;
+}
+
+static unsigned long emev2_sclkdiv_recalc(struct clk *clk)
+{
+	unsigned int sclk_div;
+
+	sclk_div = (ioread32(clk->mapped_reg) >> clk->enable_bit) & 0xff;
+
+	return clk->parent->rate / (sclk_div + 1);
+}
+
+static struct sh_clk_ops emev2_sclkdiv_clk_ops = {
+	.recalc		= emev2_sclkdiv_recalc,
+};
+
+static int __init emev2_sclkdiv_register(struct clk *clks, int nr)
+{
+	struct clk *clkp;
+	int ret = 0;
+	int k;
+
+	for (k = 0; !ret && (k < nr); k++) {
+		clkp = clks + k;
+		clkp->ops = &emev2_sclkdiv_clk_ops;
+		ret |= clk_register(clkp);
+	}
+
+	return ret;
+}
+
+static struct clk_lookup lookups[] = {
+	CLKDEV_DEV_ID("serial8250-em.0", &gclk_clks[GCLK_USIAU0_SCLK]),
+	CLKDEV_DEV_ID("e1020000.uart", &gclk_clks[GCLK_USIAU0_SCLK]),
+	CLKDEV_DEV_ID("serial8250-em.1", &gclk_clks[GCLK_USIBU1_SCLK]),
+	CLKDEV_DEV_ID("e1030000.uart", &gclk_clks[GCLK_USIBU1_SCLK]),
+	CLKDEV_DEV_ID("serial8250-em.2", &gclk_clks[GCLK_USIBU2_SCLK]),
+	CLKDEV_DEV_ID("e1040000.uart", &gclk_clks[GCLK_USIBU2_SCLK]),
+	CLKDEV_DEV_ID("serial8250-em.3", &gclk_clks[GCLK_USIBU3_SCLK]),
+	CLKDEV_DEV_ID("e1050000.uart", &gclk_clks[GCLK_USIBU3_SCLK]),
+	CLKDEV_DEV_ID("em_sti.0", &gclk_clks[GCLK_STI_SCLK]),
+	CLKDEV_DEV_ID("e0180000.sti", &gclk_clks[GCLK_STI_SCLK]),
+};
+
+void __init emev2_clock_init(void)
+{
+	int k, ret = 0;
+	static int is_setup;
+
+	/* yuck, this is ugly as hell, but the non-smp case of clocks
+	 * code is now designed to rely on ioremap() instead of static
+	 * entity maps. in the case of smp we need access to the SMU
+	 * register earlier than ioremap() is actually working without
+	 * any static maps. to enable SMP in ugly but with dynamic
+	 * mappings we have to call emev2_clock_init() from different
+	 * places depending on UP and SMP...
+	 */
+	if (is_setup++)
+		return;
+
+	smu_base = ioremap(EMEV2_SMU_BASE, PAGE_SIZE);
+	BUG_ON(!smu_base);
+
+	/* setup STI timer to run on 37.768 kHz and deassert reset */
+	emev2_smu_write(0, STI_CLKSEL);
+	emev2_smu_write(1, STI_RSTCTRL);
+
+	/* deassert reset for UART0->UART3 */
+	emev2_smu_write(2, USIAU0_RSTCTRL);
+	emev2_smu_write(2, USIBU1_RSTCTRL);
+	emev2_smu_write(2, USIBU2_RSTCTRL);
+	emev2_smu_write(2, USIBU3_RSTCTRL);
+
+	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
+		ret = clk_register(main_clks[k]);
+
+	if (!ret)
+		ret = emev2_sclkdiv_register(sclkdiv_clks, SCLKDIV_NR);
+
+	if (!ret)
+		ret = emev2_gclk_register(gclk_clks, GCLK_NR);
+
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+	if (!ret)
+		shmobile_clk_init();
+	else
+		panic("failed to setup emev2 clocks\n");
+}
diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c
index 99c4d743a99c..26eea5f21054 100644
--- a/arch/arm/mach-shmobile/clock-r8a7740.c
+++ b/arch/arm/mach-shmobile/clock-r8a7740.c
@@ -47,6 +47,7 @@
 #define PLLC01CR	0xe6150028
 
 #define SUBCKCR		0xe6150080
+#define USBCKCR		0xe615008c
 
 #define MSTPSR0		0xe6150030
 #define MSTPSR1		0xe6150038
@@ -181,6 +182,95 @@ static struct clk pllc1_div2_clk = {
 	.parent		= &pllc1_clk,
 };
 
+/* USB clock */
+static struct clk *usb24s_parents[] = {
+	[0] = &system_clk,
+	[1] = &extal2_clk
+};
+
+static int usb24s_enable(struct clk *clk)
+{
+	__raw_writel(__raw_readl(USBCKCR) & ~(1 << 8), USBCKCR);
+
+	return 0;
+}
+
+static void usb24s_disable(struct clk *clk)
+{
+	__raw_writel(__raw_readl(USBCKCR) | (1 << 8), USBCKCR);
+}
+
+static int usb24s_set_parent(struct clk *clk, struct clk *parent)
+{
+	int i, ret;
+	u32 val;
+
+	if (!clk->parent_table || !clk->parent_num)
+		return -EINVAL;
+
+	/* Search the parent */
+	for (i = 0; i < clk->parent_num; i++)
+		if (clk->parent_table[i] == parent)
+			break;
+
+	if (i == clk->parent_num)
+		return -ENODEV;
+
+	ret = clk_reparent(clk, parent);
+	if (ret < 0)
+		return ret;
+
+	val = __raw_readl(USBCKCR);
+	val &= ~(1 << 7);
+	val |= i << 7;
+	__raw_writel(val, USBCKCR);
+
+	return 0;
+}
+
+static struct sh_clk_ops usb24s_clk_ops = {
+	.recalc		= followparent_recalc,
+	.enable		= usb24s_enable,
+	.disable	= usb24s_disable,
+	.set_parent	= usb24s_set_parent,
+};
+
+static struct clk usb24s_clk = {
+	.ops		= &usb24s_clk_ops,
+	.parent_table	= usb24s_parents,
+	.parent_num	= ARRAY_SIZE(usb24s_parents),
+	.parent		= &system_clk,
+};
+
+static unsigned long usb24_recalc(struct clk *clk)
+{
+	return clk->parent->rate /
+		((__raw_readl(USBCKCR) & (1 << 6)) ? 1 : 2);
+};
+
+static int usb24_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 val;
+
+	/* closer to which ? parent->rate or parent->rate/2 */
+	val = __raw_readl(USBCKCR);
+	val &= ~(1 << 6);
+	val |= (rate > (clk->parent->rate / 4) * 3) << 6;
+	__raw_writel(val, USBCKCR);
+
+	return 0;
+}
+
+static struct sh_clk_ops usb24_clk_ops = {
+	.recalc		= usb24_recalc,
+	.set_rate	= usb24_set_rate,
+};
+
+static struct clk usb24_clk = {
+	.ops		= &usb24_clk_ops,
+	.parent		= &usb24s_clk,
+};
+
 struct clk *main_clks[] = {
 	&extalr_clk,
 	&extal1_clk,
@@ -196,6 +286,8 @@ struct clk *main_clks[] = {
 	&pllc0_clk,
 	&pllc1_clk,
 	&pllc1_div2_clk,
+	&usb24s_clk,
+	&usb24_clk,
 };
 
 static void div4_kick(struct clk *clk)
@@ -223,7 +315,7 @@ static struct clk_div4_table div4_table = {
 
 enum {
 	DIV4_I, DIV4_ZG, DIV4_B, DIV4_M1, DIV4_HP,
-	DIV4_HPP, DIV4_S, DIV4_ZB, DIV4_M3, DIV4_CP,
+	DIV4_HPP, DIV4_USBP, DIV4_S, DIV4_ZB, DIV4_M3, DIV4_CP,
 	DIV4_NR
 };
 
@@ -234,6 +326,7 @@ struct clk div4_clks[DIV4_NR] = {
 	[DIV4_M1]	= SH_CLK_DIV4(&pllc1_clk, FRQCRA,  4, 0x6fff, CLK_ENABLE_ON_INIT),
 	[DIV4_HP]	= SH_CLK_DIV4(&pllc1_clk, FRQCRB,  4, 0x6fff, 0),
 	[DIV4_HPP]	= SH_CLK_DIV4(&pllc1_clk, FRQCRC, 20, 0x6fff, 0),
+	[DIV4_USBP]	= SH_CLK_DIV4(&pllc1_clk, FRQCRC, 16, 0x6fff, 0),
 	[DIV4_S]	= SH_CLK_DIV4(&pllc1_clk, FRQCRC, 12, 0x6fff, 0),
 	[DIV4_ZB]	= SH_CLK_DIV4(&pllc1_clk, FRQCRC,  8, 0x6fff, 0),
 	[DIV4_M3]	= SH_CLK_DIV4(&pllc1_clk, FRQCRC,  4, 0x6fff, 0),
@@ -257,7 +350,11 @@ enum {
 	MSTP222,
 	MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
 
-	MSTP329, MSTP323,
+	MSTP329, MSTP328, MSTP323, MSTP320,
+	MSTP314, MSTP313, MSTP312,
+	MSTP309,
+
+	MSTP416, MSTP415, MSTP407, MSTP406,
 
 	MSTP_NR
 };
@@ -280,7 +377,18 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP200] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB],	SMSTPCR2,  0, 0), /* SCIFA4 */
 
 	[MSTP329] = SH_CLK_MSTP32(&r_clk,		SMSTPCR3, 29, 0), /* CMT10 */
+	[MSTP328] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3, 28, 0), /* FSI */
 	[MSTP323] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB],	SMSTPCR3, 23, 0), /* IIC1 */
+	[MSTP320] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3, 20, 0), /* USBF */
+	[MSTP314] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3, 14, 0), /* SDHI0 */
+	[MSTP313] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3, 13, 0), /* SDHI1 */
+	[MSTP312] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3, 12, 0), /* MMC */
+	[MSTP309] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3,  9, 0), /* GEther */
+
+	[MSTP416] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR4, 16, 0), /* USBHOST */
+	[MSTP415] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR4, 15, 0), /* SDHI2 */
+	[MSTP407] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR4,  7, 0), /* USB-Func */
+	[MSTP406] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR4,  6, 0), /* USB Phy */
 };
 
 static struct clk_lookup lookups[] = {
@@ -299,6 +407,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_CON_ID("pllc0_clk",		&pllc0_clk),
 	CLKDEV_CON_ID("pllc1_clk",		&pllc1_clk),
 	CLKDEV_CON_ID("pllc1_div2_clk",		&pllc1_div2_clk),
+	CLKDEV_CON_ID("usb24s",			&usb24s_clk),
 
 	/* DIV4 clocks */
 	CLKDEV_CON_ID("i_clk",			&div4_clks[DIV4_I]),
@@ -334,7 +443,22 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh-sci.6",		&mstp_clks[MSTP230]),
 
 	CLKDEV_DEV_ID("sh_cmt.10",		&mstp_clks[MSTP329]),
+	CLKDEV_DEV_ID("sh_fsi2",		&mstp_clks[MSTP328]),
 	CLKDEV_DEV_ID("i2c-sh_mobile.1",	&mstp_clks[MSTP323]),
+	CLKDEV_DEV_ID("renesas_usbhs",		&mstp_clks[MSTP320]),
+	CLKDEV_DEV_ID("sh_mobile_sdhi.0",	&mstp_clks[MSTP314]),
+	CLKDEV_DEV_ID("sh_mobile_sdhi.1",	&mstp_clks[MSTP313]),
+	CLKDEV_DEV_ID("sh_mmcif",		&mstp_clks[MSTP312]),
+	CLKDEV_DEV_ID("sh-eth",			&mstp_clks[MSTP309]),
+
+	CLKDEV_DEV_ID("sh_mobile_sdhi.2",	&mstp_clks[MSTP415]),
+
+	/* ICK */
+	CLKDEV_ICK_ID("host",	"renesas_usbhs",	&mstp_clks[MSTP416]),
+	CLKDEV_ICK_ID("func",	"renesas_usbhs",	&mstp_clks[MSTP407]),
+	CLKDEV_ICK_ID("phy",	"renesas_usbhs",	&mstp_clks[MSTP406]),
+	CLKDEV_ICK_ID("pci",	"renesas_usbhs",	&div4_clks[DIV4_USBP]),
+	CLKDEV_ICK_ID("usb24",	"renesas_usbhs",	&usb24_clk),
 };
 
 void __init r8a7740_clock_init(u8 md_ck)
diff --git a/arch/arm/mach-shmobile/common.c b/arch/arm/mach-shmobile/common.c
new file mode 100644
index 000000000000..608aba9d60d7
--- /dev/null
+++ b/arch/arm/mach-shmobile/common.c
@@ -0,0 +1,24 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <mach/common.h>
+
+void __init shmobile_init_late(void)
+{
+	shmobile_suspend_init();
+	shmobile_cpuidle_init();
+}
diff --git a/arch/arm/mach-shmobile/cpuidle.c b/arch/arm/mach-shmobile/cpuidle.c
index 7e6559105d40..7b541e911ab4 100644
--- a/arch/arm/mach-shmobile/cpuidle.c
+++ b/arch/arm/mach-shmobile/cpuidle.c
@@ -46,7 +46,7 @@ static struct cpuidle_driver shmobile_cpuidle_driver = {
 
 void (*shmobile_cpuidle_setup)(struct cpuidle_driver *drv);
 
-static int shmobile_cpuidle_init(void)
+int shmobile_cpuidle_init(void)
 {
 	struct cpuidle_device *dev = &shmobile_cpuidle_dev;
 	struct cpuidle_driver *drv = &shmobile_cpuidle_driver;
@@ -65,4 +65,3 @@ static int shmobile_cpuidle_init(void)
 
 	return 0;
 }
-late_initcall(shmobile_cpuidle_init);
diff --git a/arch/arm/mach-shmobile/headsmp.S b/arch/arm/mach-shmobile/headsmp.S
index 6ac015c89206..b202c1272526 100644
--- a/arch/arm/mach-shmobile/headsmp.S
+++ b/arch/arm/mach-shmobile/headsmp.S
@@ -16,6 +16,59 @@
 
 	__CPUINIT
 
+/* Cache invalidation nicked from arch/arm/mach-imx/head-v7.S, thanks!
+ *
+ * The secondary kernel init calls v7_flush_dcache_all before it enables
+ * the L1; however, the L1 comes out of reset in an undefined state, so
+ * the clean + invalidate performed by v7_flush_dcache_all causes a bunch
+ * of cache lines with uninitialized data and uninitialized tags to get
+ * written out to memory, which does really unpleasant things to the main
+ * processor.  We fix this by performing an invalidate, rather than a
+ * clean + invalidate, before jumping into the kernel.
+ *
+ * This funciton is cloned from arch/arm/mach-tegra/headsmp.S, and needs
+ * to be called for both secondary cores startup and primary core resume
+ * procedures.  Ideally, it should be moved into arch/arm/mm/cache-v7.S.
+ */
+ENTRY(v7_invalidate_l1)
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c5, 0	@ invalidate I cache
+	mcr	p15, 2, r0, c0, c0, 0
+	mrc	p15, 1, r0, c0, c0, 0
+
+	ldr	r1, =0x7fff
+	and	r2, r1, r0, lsr #13
+
+	ldr	r1, =0x3ff
+
+	and	r3, r1, r0, lsr #3	@ NumWays - 1
+	add	r2, r2, #1		@ NumSets
+
+	and	r0, r0, #0x7
+	add	r0, r0, #4	@ SetShift
+
+	clz	r1, r3		@ WayShift
+	add	r4, r3, #1	@ NumWays
+1:	sub	r2, r2, #1	@ NumSets--
+	mov	r3, r4		@ Temp = NumWays
+2:	subs	r3, r3, #1	@ Temp--
+	mov	r5, r3, lsl r1
+	mov	r6, r2, lsl r0
+	orr	r5, r5, r6	@ Reg = (Temp<<WayShift)|(NumSets<<SetShift)
+	mcr	p15, 0, r5, c7, c6, 2
+	bgt	2b
+	cmp	r2, #0
+	bgt	1b
+	dsb
+	isb
+	mov	pc, lr
+ENDPROC(v7_invalidate_l1)
+
+ENTRY(shmobile_invalidate_start)
+	bl	v7_invalidate_l1
+	b	secondary_startup
+ENDPROC(shmobile_invalidate_start)
+
 /*
  * Reset vector for secondary CPUs.
  * This will be mapped at address 0 by SBAR register.
@@ -24,4 +77,5 @@
 	.align  12
 ENTRY(shmobile_secondary_vector)
 	ldr     pc, 1f
-1:	.long   secondary_startup - PAGE_OFFSET + PLAT_PHYS_OFFSET
+1:	.long   shmobile_invalidate_start - PAGE_OFFSET + PLAT_PHYS_OFFSET
+ENDPROC(shmobile_secondary_vector)
diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
index 83ad3fe0a75f..01e2bc014f15 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -3,8 +3,9 @@
 
 extern void shmobile_earlytimer_init(void);
 extern struct sys_timer shmobile_timer;
+extern void shmobile_setup_delay(unsigned int max_cpu_core_mhz,
+				 unsigned int mult, unsigned int div);
 struct twd_local_timer;
-void shmobile_twd_init(struct twd_local_timer *twd_local_timer);
 extern void shmobile_setup_console(void);
 extern void shmobile_secondary_vector(void);
 extern int shmobile_platform_cpu_kill(unsigned int cpu);
@@ -82,5 +83,20 @@ extern int r8a7779_platform_cpu_kill(unsigned int cpu);
 extern void r8a7779_secondary_init(unsigned int cpu);
 extern int r8a7779_boot_secondary(unsigned int cpu);
 extern void r8a7779_smp_prepare_cpus(void);
+extern void r8a7779_register_twd(void);
+
+extern void shmobile_init_late(void);
+
+#ifdef CONFIG_SUSPEND
+int shmobile_suspend_init(void);
+#else
+static inline int shmobile_suspend_init(void) { return 0; }
+#endif
+
+#ifdef CONFIG_CPU_IDLE
+int shmobile_cpuidle_init(void);
+#else
+static inline int shmobile_cpuidle_init(void) { return 0; }
+#endif
 
 #endif /* __ARCH_MACH_COMMON_H */
diff --git a/arch/arm/mach-shmobile/include/mach/emev2.h b/arch/arm/mach-shmobile/include/mach/emev2.h
new file mode 100644
index 000000000000..e6b0c1bf4b7e
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/emev2.h
@@ -0,0 +1,19 @@
+#ifndef __ASM_EMEV2_H__
+#define __ASM_EMEV2_H__
+
+extern void emev2_map_io(void);
+extern void emev2_init_irq(void);
+extern void emev2_add_early_devices(void);
+extern void emev2_add_standard_devices(void);
+extern void emev2_clock_init(void);
+extern void emev2_set_boot_vector(unsigned long value);
+extern unsigned int emev2_get_core_count(void);
+extern int emev2_platform_cpu_kill(unsigned int cpu);
+extern void emev2_secondary_init(unsigned int cpu);
+extern int emev2_boot_secondary(unsigned int cpu);
+extern void emev2_smp_prepare_cpus(void);
+
+#define EMEV2_GPIO_BASE 200
+#define EMEV2_GPIO_IRQ(n) (EMEV2_GPIO_BASE + (n))
+
+#endif /* __ASM_EMEV2_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/intc.h b/arch/arm/mach-shmobile/include/mach/intc.h
index 8b22258c8caa..a5603c76cfe0 100644
--- a/arch/arm/mach-shmobile/include/mach/intc.h
+++ b/arch/arm/mach-shmobile/include/mach/intc.h
@@ -142,6 +142,50 @@ static struct intc_desc p ## _desc __initdata = {			\
 			     p ## _sense_registers, p ## _ack_registers) \
 }
 
+#define INTC_IRQ_PINS_16H(p, base, vect, str)				\
+									\
+static struct resource p ## _resources[] __initdata = {			\
+	[0] = {								\
+		.start	= base,						\
+		.end	= base + 0x64,					\
+		.flags	= IORESOURCE_MEM,				\
+	},								\
+};									\
+									\
+enum {									\
+	p ## _UNUSED = 0,						\
+	INTC_IRQ_PINS_ENUM_16H(p),					\
+};									\
+									\
+static struct intc_vect p ## _vectors[] __initdata = {			\
+	INTC_IRQ_PINS_VECT_16H(p, vect),				\
+};									\
+									\
+static struct intc_mask_reg p ## _mask_registers[] __initdata = {	\
+	INTC_IRQ_PINS_MASK_16H(p, base),				\
+};									\
+									\
+static struct intc_prio_reg p ## _prio_registers[] __initdata = {	\
+	INTC_IRQ_PINS_PRIO_16H(p, base),				\
+};									\
+									\
+static struct intc_sense_reg p ## _sense_registers[] __initdata = {	\
+	INTC_IRQ_PINS_SENSE_16H(p, base),				\
+};									\
+									\
+static struct intc_mask_reg p ## _ack_registers[] __initdata = {	\
+	INTC_IRQ_PINS_ACK_16H(p, base),					\
+};									\
+									\
+static struct intc_desc p ## _desc __initdata = {			\
+	.name = str,							\
+	.resource = p ## _resources,					\
+	.num_resources = ARRAY_SIZE(p ## _resources),			\
+	.hw = INTC_HW_DESC(p ## _vectors, NULL,				\
+			     p ## _mask_registers, p ## _prio_registers, \
+			     p ## _sense_registers, p ## _ack_registers) \
+}
+
 #define INTC_IRQ_PINS_32(p, base, vect, str)				\
 									\
 static struct resource p ## _resources[] __initdata = {			\
diff --git a/arch/arm/mach-shmobile/include/mach/irqs.h b/arch/arm/mach-shmobile/include/mach/irqs.h
index 4e686cc201fc..06a5da3c3050 100644
--- a/arch/arm/mach-shmobile/include/mach/irqs.h
+++ b/arch/arm/mach-shmobile/include/mach/irqs.h
@@ -7,7 +7,7 @@
 #define gic_spi(nr)		((nr) + 32)
 
 /* INTCS */
-#define INTCS_VECT_BASE		0x2200
+#define INTCS_VECT_BASE		0x3400
 #define INTCS_VECT(n, vect)	INTC_VECT((n), INTCS_VECT_BASE + (vect))
 #define intcs_evt2irq(evt)	evt2irq(INTCS_VECT_BASE + (evt))
 
diff --git a/arch/arm/mach-shmobile/include/mach/sh7372.h b/arch/arm/mach-shmobile/include/mach/sh7372.h
index 8254ab86f6cd..915d0093da08 100644
--- a/arch/arm/mach-shmobile/include/mach/sh7372.h
+++ b/arch/arm/mach-shmobile/include/mach/sh7372.h
@@ -457,6 +457,8 @@ enum {
 	SHDMA_SLAVE_SDHI1_TX,
 	SHDMA_SLAVE_SDHI2_RX,
 	SHDMA_SLAVE_SDHI2_TX,
+	SHDMA_SLAVE_FSIA_RX,
+	SHDMA_SLAVE_FSIA_TX,
 	SHDMA_SLAVE_MMCIF_RX,
 	SHDMA_SLAVE_MMCIF_TX,
 	SHDMA_SLAVE_USB0_TX,
diff --git a/arch/arm/mach-shmobile/include/mach/sh73a0.h b/arch/arm/mach-shmobile/include/mach/sh73a0.h
index cad57578ceed..398e2c10913b 100644
--- a/arch/arm/mach-shmobile/include/mach/sh73a0.h
+++ b/arch/arm/mach-shmobile/include/mach/sh73a0.h
@@ -482,6 +482,9 @@ enum {
 	GPIO_FN_FSIAILR_PU,
 	GPIO_FN_FSIAIBT_PU,
 	GPIO_FN_FSIAISLD_PU,
+
+	/* end of GPIO */
+	GPIO_NR,
 };
 
 /* DMA slave IDs */
@@ -515,8 +518,36 @@ enum {
 	SHDMA_SLAVE_MMCIF_RX,
 };
 
-/* PINT interrupts are located at Linux IRQ 800 and up */
-#define SH73A0_PINT0_IRQ(irq) ((irq) + 800)
-#define SH73A0_PINT1_IRQ(irq) ((irq) + 832)
+/*
+ *		SH73A0 IRQ LOCATION TABLE
+ *
+ * 416	-----------------------------------------
+ *		IRQ0-IRQ15
+ * 431	-----------------------------------------
+ * ...
+ * 448	-----------------------------------------
+ *		sh73a0-intcs
+ *		sh73a0-intca-irq-pins
+ * 680	-----------------------------------------
+ * ...
+ * 700	-----------------------------------------
+ *		sh73a0-pint0
+ * 731	-----------------------------------------
+ * 732	-----------------------------------------
+ *		sh73a0-pint1
+ * 739	-----------------------------------------
+ * ...
+ * 800	-----------------------------------------
+ *		IRQ16-IRQ31
+ * 815	-----------------------------------------
+ * ...
+ * 928	-----------------------------------------
+ *		sh73a0-intca-irq-pins
+ * 943	-----------------------------------------
+ */
+
+/* PINT interrupts are located at Linux IRQ 700 and up */
+#define SH73A0_PINT0_IRQ(irq) ((irq) + 700)
+#define SH73A0_PINT1_IRQ(irq) ((irq) + 732)
 
 #endif /* __ASM_SH73A0_H__ */
diff --git a/arch/arm/mach-shmobile/intc-sh7372.c b/arch/arm/mach-shmobile/intc-sh7372.c
index 6447e0af52d4..2587a22842f2 100644
--- a/arch/arm/mach-shmobile/intc-sh7372.c
+++ b/arch/arm/mach-shmobile/intc-sh7372.c
@@ -19,6 +19,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/module.h>
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/sh_intc.h>
@@ -305,14 +306,16 @@ static DECLARE_INTC_DESC(intca_desc, "sh7372-intca",
 			 intca_mask_registers, intca_prio_registers,
 			 NULL);
 
-INTC_IRQ_PINS_32(intca_irq_pins, 0xe6900000,
-		 INTC_VECT, "sh7372-intca-irq-pins");
+INTC_IRQ_PINS_16(intca_irq_pins_lo, 0xe6900000,
+		 INTC_VECT, "sh7372-intca-irq-lo");
+
+INTC_IRQ_PINS_16H(intca_irq_pins_hi, 0xe6900000,
+		 INTC_VECT, "sh7372-intca-irq-hi");
+
 enum {
 	UNUSED_INTCS = 0,
 	ENABLED_INTCS,
 
-	INTCS,
-
 	/* interrupt sources INTCS */
 
 	/* IRQ0S - IRQ31S */
@@ -426,8 +429,6 @@ static struct intc_vect intcs_vectors[] = {
 	INTCS_VECT(CPORTS2R, 0x1a20),
 	/* CEC */
 	INTCS_VECT(JPU6E, 0x1a80),
-
-	INTC_VECT(INTCS, 0xf80),
 };
 
 static struct intc_group intcs_groups[] __initdata = {
@@ -490,9 +491,6 @@ static struct intc_mask_reg intcs_mask_registers[] = {
 	{ 0xffd5019c, 0xffd501dc, 8, /* IMR7SA3 / IMCR7SA3 */
 	  { MFIS2_INTCS, CPORTS2R, 0, 0,
 	    JPU6E, 0, 0, 0 } },
-	{ 0xffd20104, 0, 16, /* INTAMASK */
-	  { 0, 0, 0, 0, 0, 0, 0, 0,
-	    0, 0, 0, 0, 0, 0, 0, INTCS } },
 };
 
 /* Priority is needed for INTCA to receive the INTCS interrupt */
@@ -557,18 +555,30 @@ static void __iomem *intcs_ffd5;
 void __init sh7372_init_irq(void)
 {
 	void __iomem *intevtsa;
+	int n;
 
 	intcs_ffd2 = ioremap_nocache(0xffd20000, PAGE_SIZE);
 	intevtsa = intcs_ffd2 + 0x100;
 	intcs_ffd5 = ioremap_nocache(0xffd50000, PAGE_SIZE);
 
 	register_intc_controller(&intca_desc);
-	register_intc_controller(&intca_irq_pins_desc);
+	register_intc_controller(&intca_irq_pins_lo_desc);
+	register_intc_controller(&intca_irq_pins_hi_desc);
 	register_intc_controller(&intcs_desc);
 
+	/* setup dummy cascade chip for INTCS */
+	n = evt2irq(0xf80);
+	irq_alloc_desc_at(n, numa_node_id());
+	irq_set_chip_and_handler_name(n, &dummy_irq_chip,
+				      handle_level_irq, "level");
+	set_irq_flags(n, IRQF_VALID); /* yuck */
+
 	/* demux using INTEVTSA */
-	irq_set_handler_data(evt2irq(0xf80), (void *)intevtsa);
-	irq_set_chained_handler(evt2irq(0xf80), intcs_demux);
+	irq_set_handler_data(n, (void *)intevtsa);
+	irq_set_chained_handler(n, intcs_demux);
+
+	/* unmask INTCS in INTAMASK */
+	iowrite16(0, intcs_ffd2 + 0x104);
 }
 
 static unsigned short ffd2[0x200];
diff --git a/arch/arm/mach-shmobile/pfc-r8a7740.c b/arch/arm/mach-shmobile/pfc-r8a7740.c
index a4fff6950b03..670fe1869dbc 100644
--- a/arch/arm/mach-shmobile/pfc-r8a7740.c
+++ b/arch/arm/mach-shmobile/pfc-r8a7740.c
@@ -22,6 +22,7 @@
 #include <linux/kernel.h>
 #include <linux/gpio.h>
 #include <mach/r8a7740.h>
+#include <mach/irqs.h>
 
 #define CPU_ALL_PORT(fn, pfx, sfx)					\
 	PORT_10(fn, pfx, sfx),		PORT_90(fn, pfx, sfx),		\
@@ -2527,6 +2528,41 @@ static struct pinmux_data_reg pinmux_data_regs[] = {
 	{ },
 };
 
+static struct pinmux_irq pinmux_irqs[] = {
+	PINMUX_IRQ(evt2irq(0x0200), PORT2_FN0,	 PORT13_FN0),	/* IRQ0A */
+	PINMUX_IRQ(evt2irq(0x0220), PORT20_FN0),		/* IRQ1A */
+	PINMUX_IRQ(evt2irq(0x0240), PORT11_FN0,	 PORT12_FN0),	/* IRQ2A */
+	PINMUX_IRQ(evt2irq(0x0260), PORT10_FN0,	 PORT14_FN0),	/* IRQ3A */
+	PINMUX_IRQ(evt2irq(0x0280), PORT15_FN0,	 PORT172_FN0),	/* IRQ4A */
+	PINMUX_IRQ(evt2irq(0x02A0), PORT0_FN0,	 PORT1_FN0),	/* IRQ5A */
+	PINMUX_IRQ(evt2irq(0x02C0), PORT121_FN0, PORT173_FN0),	/* IRQ6A */
+	PINMUX_IRQ(evt2irq(0x02E0), PORT120_FN0, PORT209_FN0),	/* IRQ7A */
+	PINMUX_IRQ(evt2irq(0x0300), PORT119_FN0),		/* IRQ8A */
+	PINMUX_IRQ(evt2irq(0x0320), PORT118_FN0, PORT210_FN0),	/* IRQ9A */
+	PINMUX_IRQ(evt2irq(0x0340), PORT19_FN0),		/* IRQ10A */
+	PINMUX_IRQ(evt2irq(0x0360), PORT104_FN0),		/* IRQ11A */
+	PINMUX_IRQ(evt2irq(0x0380), PORT42_FN0,	 PORT97_FN0),	/* IRQ12A */
+	PINMUX_IRQ(evt2irq(0x03A0), PORT64_FN0,	 PORT98_FN0),	/* IRQ13A */
+	PINMUX_IRQ(evt2irq(0x03C0), PORT63_FN0,	 PORT99_FN0),	/* IRQ14A */
+	PINMUX_IRQ(evt2irq(0x03E0), PORT62_FN0,	 PORT100_FN0),	/* IRQ15A */
+	PINMUX_IRQ(evt2irq(0x3200), PORT68_FN0,	 PORT211_FN0),	/* IRQ16A */
+	PINMUX_IRQ(evt2irq(0x3220), PORT69_FN0),		/* IRQ17A */
+	PINMUX_IRQ(evt2irq(0x3240), PORT70_FN0),		/* IRQ18A */
+	PINMUX_IRQ(evt2irq(0x3260), PORT71_FN0),		/* IRQ19A */
+	PINMUX_IRQ(evt2irq(0x3280), PORT67_FN0),		/* IRQ20A */
+	PINMUX_IRQ(evt2irq(0x32A0), PORT202_FN0),		/* IRQ21A */
+	PINMUX_IRQ(evt2irq(0x32C0), PORT95_FN0),		/* IRQ22A */
+	PINMUX_IRQ(evt2irq(0x32E0), PORT96_FN0),		/* IRQ23A */
+	PINMUX_IRQ(evt2irq(0x3300), PORT180_FN0),		/* IRQ24A */
+	PINMUX_IRQ(evt2irq(0x3320), PORT38_FN0),		/* IRQ25A */
+	PINMUX_IRQ(evt2irq(0x3340), PORT58_FN0,	 PORT81_FN0),	/* IRQ26A */
+	PINMUX_IRQ(evt2irq(0x3360), PORT57_FN0,	 PORT168_FN0),	/* IRQ27A */
+	PINMUX_IRQ(evt2irq(0x3380), PORT56_FN0,	 PORT169_FN0),	/* IRQ28A */
+	PINMUX_IRQ(evt2irq(0x33A0), PORT50_FN0,	 PORT170_FN0),	/* IRQ29A */
+	PINMUX_IRQ(evt2irq(0x33C0), PORT49_FN0,	 PORT171_FN0),	/* IRQ30A */
+	PINMUX_IRQ(evt2irq(0x33E0), PORT41_FN0,	 PORT167_FN0),	/* IRQ31A */
+};
+
 static struct pinmux_info r8a7740_pinmux_info = {
 	.name		= "r8a7740_pfc",
 	.reserved_id	= PINMUX_RESERVED,
@@ -2554,6 +2590,9 @@ static struct pinmux_info r8a7740_pinmux_info = {
 
 	.gpio_data	= pinmux_data,
 	.gpio_data_size	= ARRAY_SIZE(pinmux_data),
+
+	.gpio_irq	= pinmux_irqs,
+	.gpio_irq_size	= ARRAY_SIZE(pinmux_irqs),
 };
 
 void r8a7740_pinmux_init(void)
diff --git a/arch/arm/mach-shmobile/pfc-sh73a0.c b/arch/arm/mach-shmobile/pfc-sh73a0.c
index e05634ce2e0d..4a547b803268 100644
--- a/arch/arm/mach-shmobile/pfc-sh73a0.c
+++ b/arch/arm/mach-shmobile/pfc-sh73a0.c
@@ -829,14 +829,14 @@ static pinmux_enum_t pinmux_data[] = {
 	PINMUX_DATA(PORT27_I2C_SCL2_MARK, PORT27_FN2, MSEL2CR_MSEL17_0,
 		MSEL2CR_MSEL16_1), \
 	PINMUX_DATA(PORT27_I2C_SCL3_MARK, PORT27_FN3, MSEL2CR_MSEL19_0,
-		MSEL2CR_MSEL18_0), \
+		MSEL2CR_MSEL18_1), \
 	PINMUX_DATA(MFG0_OUT1_MARK, PORT27_FN4), \
 	PINMUX_DATA(PORT27_IROUT_MARK, PORT27_FN7),
 	PINMUX_DATA(XDVFS2_MARK, PORT28_FN1), \
 	PINMUX_DATA(PORT28_I2C_SDA2_MARK, PORT28_FN2, MSEL2CR_MSEL17_0,
 		MSEL2CR_MSEL16_1), \
 	PINMUX_DATA(PORT28_I2C_SDA3_MARK, PORT28_FN3, MSEL2CR_MSEL19_0,
-		MSEL2CR_MSEL18_0), \
+		MSEL2CR_MSEL18_1), \
 	PINMUX_DATA(PORT28_TPU1TO1_MARK, PORT28_FN7),
 	PINMUX_DATA(SIM_RST_MARK, PORT29_FN1), \
 	PINMUX_DATA(PORT29_TPU1TO1_MARK, PORT29_FN4),
diff --git a/arch/arm/mach-shmobile/platsmp.c b/arch/arm/mach-shmobile/platsmp.c
index 45fa3924c6a1..bacdd667e3b1 100644
--- a/arch/arm/mach-shmobile/platsmp.c
+++ b/arch/arm/mach-shmobile/platsmp.c
@@ -16,12 +16,16 @@
 #include <linux/device.h>
 #include <linux/smp.h>
 #include <linux/io.h>
+#include <linux/of.h>
 #include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 #include <mach/common.h>
+#include <mach/emev2.h>
 
-#define is_sh73a0() (machine_is_ag5evm() || machine_is_kota2())
+#define is_sh73a0() (machine_is_ag5evm() || machine_is_kota2() || \
+			of_machine_is_compatible("renesas,sh73a0"))
 #define is_r8a7779() machine_is_marzen()
+#define is_emev2() of_machine_is_compatible("renesas,emev2")
 
 static unsigned int __init shmobile_smp_get_core_count(void)
 {
@@ -31,6 +35,9 @@ static unsigned int __init shmobile_smp_get_core_count(void)
 	if (is_r8a7779())
 		return r8a7779_get_core_count();
 
+	if (is_emev2())
+		return emev2_get_core_count();
+
 	return 1;
 }
 
@@ -41,6 +48,9 @@ static void __init shmobile_smp_prepare_cpus(void)
 
 	if (is_r8a7779())
 		r8a7779_smp_prepare_cpus();
+
+	if (is_emev2())
+		emev2_smp_prepare_cpus();
 }
 
 int shmobile_platform_cpu_kill(unsigned int cpu)
@@ -48,6 +58,9 @@ int shmobile_platform_cpu_kill(unsigned int cpu)
 	if (is_r8a7779())
 		return r8a7779_platform_cpu_kill(cpu);
 
+	if (is_emev2())
+		return emev2_platform_cpu_kill(cpu);
+
 	return 1;
 }
 
@@ -60,6 +73,9 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
 
 	if (is_r8a7779())
 		r8a7779_secondary_init(cpu);
+
+	if (is_emev2())
+		emev2_secondary_init(cpu);
 }
 
 int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
@@ -70,6 +86,9 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 	if (is_r8a7779())
 		return r8a7779_boot_secondary(cpu);
 
+	if (is_emev2())
+		return emev2_boot_secondary(cpu);
+
 	return -ENOSYS;
 }
 
diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c
new file mode 100644
index 000000000000..dae9aa68bb09
--- /dev/null
+++ b/arch/arm/mach-shmobile/setup-emev2.c
@@ -0,0 +1,452 @@
+/*
+ * Emma Mobile EV2 processor support
+ *
+ * Copyright (C) 2012  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/gpio-em.h>
+#include <linux/of_platform.h>
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/of_irq.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/emev2.h>
+#include <mach/irqs.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/hardware/gic.h>
+
+static struct map_desc emev2_io_desc[] __initdata = {
+#ifdef CONFIG_SMP
+	/* 128K entity map for 0xe0100000 (SMU) */
+	{
+		.virtual	= 0xe0100000,
+		.pfn		= __phys_to_pfn(0xe0100000),
+		.length		= SZ_128K,
+		.type		= MT_DEVICE
+	},
+	/* 2M mapping for SCU + L2 controller */
+	{
+		.virtual	= 0xf0000000,
+		.pfn		= __phys_to_pfn(0x1e000000),
+		.length		= SZ_2M,
+		.type		= MT_DEVICE
+	},
+#endif
+};
+
+void __init emev2_map_io(void)
+{
+	iotable_init(emev2_io_desc, ARRAY_SIZE(emev2_io_desc));
+}
+
+/* UART */
+static struct resource uart0_resources[] = {
+	[0]	= {
+		.start	= 0xe1020000,
+		.end	= 0xe1020037,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1]	= {
+		.start	= 40,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device uart0_device = {
+	.name		= "serial8250-em",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(uart0_resources),
+	.resource	= uart0_resources,
+};
+
+static struct resource uart1_resources[] = {
+	[0]	= {
+		.start	= 0xe1030000,
+		.end	= 0xe1030037,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1]	= {
+		.start	= 41,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device uart1_device = {
+	.name		= "serial8250-em",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(uart1_resources),
+	.resource	= uart1_resources,
+};
+
+static struct resource uart2_resources[] = {
+	[0]	= {
+		.start	= 0xe1040000,
+		.end	= 0xe1040037,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1]	= {
+		.start	= 42,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device uart2_device = {
+	.name		= "serial8250-em",
+	.id		= 2,
+	.num_resources	= ARRAY_SIZE(uart2_resources),
+	.resource	= uart2_resources,
+};
+
+static struct resource uart3_resources[] = {
+	[0]	= {
+		.start	= 0xe1050000,
+		.end	= 0xe1050037,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1]	= {
+		.start	= 43,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device uart3_device = {
+	.name		= "serial8250-em",
+	.id		= 3,
+	.num_resources	= ARRAY_SIZE(uart3_resources),
+	.resource	= uart3_resources,
+};
+
+/* STI */
+static struct resource sti_resources[] = {
+	[0] = {
+		.name	= "STI",
+		.start	= 0xe0180000,
+		.end	= 0xe0180053,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 157,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sti_device = {
+	.name		= "em_sti",
+	.id		= 0,
+	.resource	= sti_resources,
+	.num_resources	= ARRAY_SIZE(sti_resources),
+};
+
+
+/* GIO */
+static struct gpio_em_config gio0_config = {
+	.gpio_base = 0,
+	.irq_base = EMEV2_GPIO_IRQ(0),
+	.number_of_pins = 32,
+};
+
+static struct resource gio0_resources[] = {
+	[0] = {
+		.name	= "GIO_000",
+		.start	= 0xe0050000,
+		.end	= 0xe005002b,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.name	= "GIO_000",
+		.start	= 0xe0050040,
+		.end	= 0xe005005f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start	= 99,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start	= 100,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device gio0_device = {
+	.name		= "em_gio",
+	.id		= 0,
+	.resource	= gio0_resources,
+	.num_resources	= ARRAY_SIZE(gio0_resources),
+	.dev		= {
+		.platform_data	= &gio0_config,
+	},
+};
+
+static struct gpio_em_config gio1_config = {
+	.gpio_base = 32,
+	.irq_base = EMEV2_GPIO_IRQ(32),
+	.number_of_pins = 32,
+};
+
+static struct resource gio1_resources[] = {
+	[0] = {
+		.name	= "GIO_032",
+		.start	= 0xe0050080,
+		.end	= 0xe00500ab,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.name	= "GIO_032",
+		.start	= 0xe00500c0,
+		.end	= 0xe00500df,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start	= 101,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start	= 102,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device gio1_device = {
+	.name		= "em_gio",
+	.id		= 1,
+	.resource	= gio1_resources,
+	.num_resources	= ARRAY_SIZE(gio1_resources),
+	.dev		= {
+		.platform_data	= &gio1_config,
+	},
+};
+
+static struct gpio_em_config gio2_config = {
+	.gpio_base = 64,
+	.irq_base = EMEV2_GPIO_IRQ(64),
+	.number_of_pins = 32,
+};
+
+static struct resource gio2_resources[] = {
+	[0] = {
+		.name	= "GIO_064",
+		.start	= 0xe0050100,
+		.end	= 0xe005012b,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.name	= "GIO_064",
+		.start	= 0xe0050140,
+		.end	= 0xe005015f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start	= 103,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start	= 104,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device gio2_device = {
+	.name		= "em_gio",
+	.id		= 2,
+	.resource	= gio2_resources,
+	.num_resources	= ARRAY_SIZE(gio2_resources),
+	.dev		= {
+		.platform_data	= &gio2_config,
+	},
+};
+
+static struct gpio_em_config gio3_config = {
+	.gpio_base = 96,
+	.irq_base = EMEV2_GPIO_IRQ(96),
+	.number_of_pins = 32,
+};
+
+static struct resource gio3_resources[] = {
+	[0] = {
+		.name	= "GIO_096",
+		.start	= 0xe0050100,
+		.end	= 0xe005012b,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.name	= "GIO_096",
+		.start	= 0xe0050140,
+		.end	= 0xe005015f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start	= 105,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start	= 106,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device gio3_device = {
+	.name		= "em_gio",
+	.id		= 3,
+	.resource	= gio3_resources,
+	.num_resources	= ARRAY_SIZE(gio3_resources),
+	.dev		= {
+		.platform_data	= &gio3_config,
+	},
+};
+
+static struct gpio_em_config gio4_config = {
+	.gpio_base = 128,
+	.irq_base = EMEV2_GPIO_IRQ(128),
+	.number_of_pins = 31,
+};
+
+static struct resource gio4_resources[] = {
+	[0] = {
+		.name	= "GIO_128",
+		.start	= 0xe0050200,
+		.end	= 0xe005022b,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.name	= "GIO_128",
+		.start	= 0xe0050240,
+		.end	= 0xe005025f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start	= 107,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start	= 108,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device gio4_device = {
+	.name		= "em_gio",
+	.id		= 4,
+	.resource	= gio4_resources,
+	.num_resources	= ARRAY_SIZE(gio4_resources),
+	.dev		= {
+		.platform_data	= &gio4_config,
+	},
+};
+
+static struct platform_device *emev2_early_devices[] __initdata = {
+	&uart0_device,
+	&uart1_device,
+	&uart2_device,
+	&uart3_device,
+};
+
+static struct platform_device *emev2_late_devices[] __initdata = {
+	&sti_device,
+	&gio0_device,
+	&gio1_device,
+	&gio2_device,
+	&gio3_device,
+	&gio4_device,
+};
+
+void __init emev2_add_standard_devices(void)
+{
+	emev2_clock_init();
+
+	platform_add_devices(emev2_early_devices,
+			     ARRAY_SIZE(emev2_early_devices));
+
+	platform_add_devices(emev2_late_devices,
+			     ARRAY_SIZE(emev2_late_devices));
+}
+
+void __init emev2_init_delay(void)
+{
+	shmobile_setup_delay(533, 1, 3); /* Cortex-A9 @ 533MHz */
+}
+
+void __init emev2_add_early_devices(void)
+{
+	emev2_init_delay();
+
+	early_platform_add_devices(emev2_early_devices,
+				   ARRAY_SIZE(emev2_early_devices));
+
+	/* setup early console here as well */
+	shmobile_setup_console();
+}
+
+void __init emev2_init_irq(void)
+{
+	void __iomem *gic_dist_base;
+	void __iomem *gic_cpu_base;
+
+	/* Static mappings, never released */
+	gic_dist_base = ioremap(0xe0028000, PAGE_SIZE);
+	gic_cpu_base = ioremap(0xe0020000, PAGE_SIZE);
+	BUG_ON(!gic_dist_base || !gic_cpu_base);
+
+	/* Use GIC to handle interrupts */
+	gic_init(0, 29, gic_dist_base, gic_cpu_base);
+}
+
+#ifdef CONFIG_USE_OF
+static const struct of_dev_auxdata emev2_auxdata_lookup[] __initconst = {
+	{ }
+};
+
+void __init emev2_add_standard_devices_dt(void)
+{
+	of_platform_populate(NULL, of_default_bus_match_table,
+			     emev2_auxdata_lookup, NULL);
+}
+
+static const struct of_device_id emev2_dt_irq_match[] = {
+	{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
+	{},
+};
+
+static const char *emev2_boards_compat_dt[] __initdata = {
+	"renesas,emev2",
+	NULL,
+};
+
+void __init emev2_init_irq_dt(void)
+{
+	of_irq_init(emev2_dt_irq_match);
+}
+
+DT_MACHINE_START(EMEV2_DT, "Generic Emma Mobile EV2 (Flattened Device Tree)")
+	.init_early	= emev2_init_delay,
+	.nr_irqs	= NR_IRQS_LEGACY,
+	.init_irq	= emev2_init_irq_dt,
+	.handle_irq	= gic_handle_irq,
+	.init_machine	= emev2_add_standard_devices_dt,
+	.timer		= &shmobile_timer,
+	.dt_compat	= emev2_boards_compat_dt,
+MACHINE_END
+
+#endif /* CONFIG_USE_OF */
diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index 14edb5cffa7f..ec4eb49c1693 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -18,6 +18,7 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 #include <linux/delay.h>
+#include <linux/dma-mapping.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
@@ -60,6 +61,12 @@ static struct map_desc r8a7740_io_desc[] __initdata = {
 void __init r8a7740_map_io(void)
 {
 	iotable_init(r8a7740_io_desc, ARRAY_SIZE(r8a7740_io_desc));
+
+	/*
+	 * DMA memory at 0xff200000 - 0xffdfffff. The default 2MB size isn't
+	 * enough to allocate the frame buffer memory.
+	 */
+	init_consistent_dma_size(12 << 20);
 }
 
 /* SCIFA0 */
@@ -350,19 +357,19 @@ static void r8a7740_i2c_workaround(struct platform_device *pdev)
 	i2c_write(reg, ICSTART, i2c_read(reg, ICSTART) | 0x10);
 	i2c_read(reg, ICSTART); /* dummy read */
 
-	mdelay(100);
+	udelay(10);
 
 	i2c_write(reg, ICCR, 0x01);
-	i2c_read(reg, ICCR);
 	i2c_write(reg, ICSTART, 0x00);
-	i2c_read(reg, ICSTART);
+
+	udelay(10);
 
 	i2c_write(reg, ICCR, 0x10);
-	mdelay(100);
+	udelay(10);
 	i2c_write(reg, ICCR, 0x00);
-	mdelay(100);
+	udelay(10);
 	i2c_write(reg, ICCR, 0x10);
-	mdelay(100);
+	udelay(10);
 
 	iounmap(reg);
 }
diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c
index 12c6f529ab89..e98e46f6cf55 100644
--- a/arch/arm/mach-shmobile/setup-r8a7779.c
+++ b/arch/arm/mach-shmobile/setup-r8a7779.c
@@ -262,10 +262,14 @@ void __init r8a7779_add_standard_devices(void)
 			    ARRAY_SIZE(r8a7779_late_devices));
 }
 
+/* do nothing for !CONFIG_SMP or !CONFIG_HAVE_TWD */
+void __init __weak r8a7779_register_twd(void) { }
+
 static void __init r8a7779_earlytimer_init(void)
 {
 	r8a7779_clock_init();
 	shmobile_earlytimer_init();
+	r8a7779_register_twd();
 }
 
 void __init r8a7779_add_early_devices(void)
diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c
index 2fe8f83ca124..6a4bd582c028 100644
--- a/arch/arm/mach-shmobile/setup-sh7372.c
+++ b/arch/arm/mach-shmobile/setup-sh7372.c
@@ -22,6 +22,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/platform_device.h>
+#include <linux/of_platform.h>
 #include <linux/uio_driver.h>
 #include <linux/delay.h>
 #include <linux/input.h>
@@ -461,6 +462,16 @@ static const struct sh_dmae_slave_config sh7372_dmae_slaves[] = {
 		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT),
 		.mid_rid	= 0xce,
 	}, {
+		.slave_id	= SHDMA_SLAVE_FSIA_TX,
+		.addr		= 0xfe1f0024,
+		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
+		.mid_rid	= 0xb1,
+	}, {
+		.slave_id	= SHDMA_SLAVE_FSIA_RX,
+		.addr		= 0xfe1f0020,
+		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
+		.mid_rid	= 0xb2,
+	}, {
 		.slave_id	= SHDMA_SLAVE_MMCIF_TX,
 		.addr		= 0xe6bd0034,
 		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
@@ -1092,3 +1103,50 @@ void __init sh7372_add_early_devices(void)
 	/* override timer setup with soc-specific code */
 	shmobile_timer.init = sh7372_earlytimer_init;
 }
+
+#ifdef CONFIG_USE_OF
+
+void __init sh7372_add_early_devices_dt(void)
+{
+	shmobile_setup_delay(800, 1, 3); /* Cortex-A8 @ 800MHz */
+
+	early_platform_add_devices(sh7372_early_devices,
+				   ARRAY_SIZE(sh7372_early_devices));
+
+	/* setup early console here as well */
+	shmobile_setup_console();
+}
+
+static const struct of_dev_auxdata sh7372_auxdata_lookup[] __initconst = {
+	{ }
+};
+
+void __init sh7372_add_standard_devices_dt(void)
+{
+	/* clocks are setup late during boot in the case of DT */
+	sh7372_clock_init();
+
+	platform_add_devices(sh7372_early_devices,
+			    ARRAY_SIZE(sh7372_early_devices));
+
+	of_platform_populate(NULL, of_default_bus_match_table,
+			     sh7372_auxdata_lookup, NULL);
+}
+
+static const char *sh7372_boards_compat_dt[] __initdata = {
+	"renesas,sh7372",
+	NULL,
+};
+
+DT_MACHINE_START(SH7372_DT, "Generic SH7372 (Flattened Device Tree)")
+	.map_io		= sh7372_map_io,
+	.init_early	= sh7372_add_early_devices_dt,
+	.nr_irqs	= NR_IRQS_LEGACY,
+	.init_irq	= sh7372_init_irq,
+	.handle_irq	= shmobile_handle_irq_intc,
+	.init_machine	= sh7372_add_standard_devices_dt,
+	.timer		= &shmobile_timer,
+	.dt_compat	= sh7372_boards_compat_dt,
+MACHINE_END
+
+#endif /* CONFIG_USE_OF */
diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c
index 5bebffc10455..04a0dfe75493 100644
--- a/arch/arm/mach-shmobile/setup-sh73a0.c
+++ b/arch/arm/mach-shmobile/setup-sh73a0.c
@@ -688,10 +688,14 @@ void __init sh73a0_add_standard_devices(void)
 			    ARRAY_SIZE(sh73a0_late_devices));
 }
 
+/* do nothing for !CONFIG_SMP or !CONFIG_HAVE_TWD */
+void __init __weak sh73a0_register_twd(void) { }
+
 static void __init sh73a0_earlytimer_init(void)
 {
 	sh73a0_clock_init();
 	shmobile_earlytimer_init();
+	sh73a0_register_twd();
 }
 
 void __init sh73a0_add_early_devices(void)
diff --git a/arch/arm/mach-shmobile/smp-emev2.c b/arch/arm/mach-shmobile/smp-emev2.c
new file mode 100644
index 000000000000..6a35c4a31e6c
--- /dev/null
+++ b/arch/arm/mach-shmobile/smp-emev2.c
@@ -0,0 +1,97 @@
+/*
+ * SMP support for Emma Mobile EV2
+ *
+ * Copyright (C) 2012  Renesas Solutions Corp.
+ * Copyright (C) 2012  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <mach/common.h>
+#include <mach/emev2.h>
+#include <asm/smp_plat.h>
+#include <asm/smp_scu.h>
+#include <asm/hardware/gic.h>
+#include <asm/cacheflush.h>
+
+#define EMEV2_SCU_BASE 0x1e000000
+
+static DEFINE_SPINLOCK(scu_lock);
+static void __iomem *scu_base;
+
+static void modify_scu_cpu_psr(unsigned long set, unsigned long clr)
+{
+	unsigned long tmp;
+
+	/* we assume this code is running on a different cpu
+	 * than the one that is changing coherency setting */
+	spin_lock(&scu_lock);
+	tmp = readl(scu_base + 8);
+	tmp &= ~clr;
+	tmp |= set;
+	writel(tmp, scu_base + 8);
+	spin_unlock(&scu_lock);
+
+}
+
+unsigned int __init emev2_get_core_count(void)
+{
+	if (!scu_base) {
+		scu_base = ioremap(EMEV2_SCU_BASE, PAGE_SIZE);
+		emev2_clock_init(); /* need ioremapped SMU */
+	}
+
+	WARN_ON_ONCE(!scu_base);
+
+	return scu_base ? scu_get_core_count(scu_base) : 1;
+}
+
+int emev2_platform_cpu_kill(unsigned int cpu)
+{
+	return 0; /* not supported yet */
+}
+
+void __cpuinit emev2_secondary_init(unsigned int cpu)
+{
+	gic_secondary_init(0);
+}
+
+int __cpuinit emev2_boot_secondary(unsigned int cpu)
+{
+	cpu = cpu_logical_map(cpu);
+
+	/* enable cache coherency */
+	modify_scu_cpu_psr(0, 3 << (cpu * 8));
+
+	/* Tell ROM loader about our vector (in headsmp.S) */
+	emev2_set_boot_vector(__pa(shmobile_secondary_vector));
+
+	gic_raise_softirq(cpumask_of(cpu), 1);
+	return 0;
+}
+
+void __init emev2_smp_prepare_cpus(void)
+{
+	int cpu = cpu_logical_map(0);
+
+	scu_enable(scu_base);
+
+	/* enable cache coherency on CPU0 */
+	modify_scu_cpu_psr(0, 3 << (cpu * 8));
+}
diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c
index b62e19d4c9af..6d1d0238cbf7 100644
--- a/arch/arm/mach-shmobile/smp-r8a7779.c
+++ b/arch/arm/mach-shmobile/smp-r8a7779.c
@@ -64,8 +64,15 @@ static void __iomem *scu_base_addr(void)
 static DEFINE_SPINLOCK(scu_lock);
 static unsigned long tmp;
 
+#ifdef CONFIG_HAVE_ARM_TWD
 static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, 0xf0000600, 29);
 
+void __init r8a7779_register_twd(void)
+{
+	twd_local_timer_register(&twd_local_timer);
+}
+#endif
+
 static void modify_scu_cpu_psr(unsigned long set, unsigned long clr)
 {
 	void __iomem *scu_base = scu_base_addr();
@@ -84,7 +91,6 @@ unsigned int __init r8a7779_get_core_count(void)
 {
 	void __iomem *scu_base = scu_base_addr();
 
-	shmobile_twd_init(&twd_local_timer);
 	return scu_get_core_count(scu_base);
 }
 
diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c
index 14ad8b052f1a..e36c41c4ab40 100644
--- a/arch/arm/mach-shmobile/smp-sh73a0.c
+++ b/arch/arm/mach-shmobile/smp-sh73a0.c
@@ -42,7 +42,13 @@ static void __iomem *scu_base_addr(void)
 static DEFINE_SPINLOCK(scu_lock);
 static unsigned long tmp;
 
+#ifdef CONFIG_HAVE_ARM_TWD
 static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, 0xf0000600, 29);
+void __init sh73a0_register_twd(void)
+{
+	twd_local_timer_register(&twd_local_timer);
+}
+#endif
 
 static void modify_scu_cpu_psr(unsigned long set, unsigned long clr)
 {
@@ -62,7 +68,6 @@ unsigned int __init sh73a0_get_core_count(void)
 {
 	void __iomem *scu_base = scu_base_addr();
 
-	shmobile_twd_init(&twd_local_timer);
 	return scu_get_core_count(scu_base);
 }
 
diff --git a/arch/arm/mach-shmobile/suspend.c b/arch/arm/mach-shmobile/suspend.c
index 4d1b86a49923..47d83f7a70b6 100644
--- a/arch/arm/mach-shmobile/suspend.c
+++ b/arch/arm/mach-shmobile/suspend.c
@@ -39,9 +39,8 @@ struct platform_suspend_ops shmobile_suspend_ops = {
 	.valid		= suspend_valid_only_mem,
 };
 
-static int __init shmobile_suspend_init(void)
+int __init shmobile_suspend_init(void)
 {
 	suspend_set_ops(&shmobile_suspend_ops);
 	return 0;
 }
-late_initcall(shmobile_suspend_init);
diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c
index 2fba5f3d1c8a..a68919727e24 100644
--- a/arch/arm/mach-shmobile/timer.c
+++ b/arch/arm/mach-shmobile/timer.c
@@ -19,9 +19,27 @@
  *
  */
 #include <linux/platform_device.h>
+#include <linux/delay.h>
 #include <asm/mach/time.h>
 #include <asm/smp_twd.h>
 
+void __init shmobile_setup_delay(unsigned int max_cpu_core_mhz,
+				 unsigned int mult, unsigned int div)
+{
+	/* calculate a worst-case loops-per-jiffy value
+	 * based on maximum cpu core mhz setting and the
+	 * __delay() implementation in arch/arm/lib/delay.S
+	 *
+	 * this will result in a longer delay than expected
+	 * when the cpu core runs on lower frequencies.
+	 */
+
+	unsigned int value = (1000000 * mult) / (HZ * div);
+
+	if (!preset_lpj)
+		preset_lpj = max_cpu_core_mhz * value;
+}
+
 static void __init shmobile_late_time_init(void)
 {
 	/*
@@ -46,15 +64,6 @@ static void __init shmobile_timer_init(void)
 {
 }
 
-void __init shmobile_twd_init(struct twd_local_timer *twd_local_timer)
-{
-#ifdef CONFIG_HAVE_ARM_TWD
-	int err = twd_local_timer_register(twd_local_timer);
-	if (err)
-		pr_err("twd_local_timer_register failed %d\n", err);
-#endif
-}
-
 struct sys_timer shmobile_timer = {
 	.init		= shmobile_timer_init,
 };
diff --git a/arch/arm/mach-spear13xx/Kconfig b/arch/arm/mach-spear13xx/Kconfig
new file mode 100644
index 000000000000..eaadc66d96b3
--- /dev/null
+++ b/arch/arm/mach-spear13xx/Kconfig
@@ -0,0 +1,20 @@
+#
+# SPEAr13XX Machine configuration file
+#
+
+if ARCH_SPEAR13XX
+
+menu "SPEAr13xx Implementations"
+config MACH_SPEAR1310
+	bool "SPEAr1310 Machine support with Device Tree"
+	select PINCTRL_SPEAR1310
+	help
+	  Supports ST SPEAr1310 machine configured via the device-tree
+
+config MACH_SPEAR1340
+	bool "SPEAr1340 Machine support with Device Tree"
+	select PINCTRL_SPEAR1340
+	help
+	  Supports ST SPEAr1340 machine configured via the device-tree
+endmenu
+endif #ARCH_SPEAR13XX
diff --git a/arch/arm/mach-spear13xx/Makefile b/arch/arm/mach-spear13xx/Makefile
new file mode 100644
index 000000000000..3435ea78c15d
--- /dev/null
+++ b/arch/arm/mach-spear13xx/Makefile
@@ -0,0 +1,10 @@
+#
+# Makefile for SPEAr13XX machine series
+#
+
+obj-$(CONFIG_SMP)		+= headsmp.o platsmp.o
+obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
+
+obj-$(CONFIG_ARCH_SPEAR13XX)	+= spear13xx.o
+obj-$(CONFIG_MACH_SPEAR1310)	+= spear1310.o
+obj-$(CONFIG_MACH_SPEAR1340)	+= spear1340.o
diff --git a/arch/arm/mach-spear13xx/Makefile.boot b/arch/arm/mach-spear13xx/Makefile.boot
new file mode 100644
index 000000000000..403efd7e6d27
--- /dev/null
+++ b/arch/arm/mach-spear13xx/Makefile.boot
@@ -0,0 +1,6 @@
+zreladdr-y	+= 0x00008000
+params_phys-y	:= 0x00000100
+initrd_phys-y	:= 0x00800000
+
+dtb-$(CONFIG_MACH_SPEAR1310)	+= spear1310-evb.dtb
+dtb-$(CONFIG_MACH_SPEAR1340)	+= spear1340-evb.dtb
diff --git a/arch/arm/mach-spear13xx/headsmp.S b/arch/arm/mach-spear13xx/headsmp.S
new file mode 100644
index 000000000000..ed85473a047f
--- /dev/null
+++ b/arch/arm/mach-spear13xx/headsmp.S
@@ -0,0 +1,47 @@
+/*
+ * arch/arm/mach-spear13XX/headsmp.S
+ *
+ * Picked from realview
+ * Copyright (c) 2012 ST Microelectronics Limited
+ * Shiraz Hashim <shiraz.hashim@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+	__INIT
+
+/*
+ * spear13xx specific entry point for secondary CPUs. This provides
+ * a "holding pen" into which all secondary cores are held until we're
+ * ready for them to initialise.
+ */
+ENTRY(spear13xx_secondary_startup)
+	mrc	p15, 0, r0, c0, c0, 5
+	and	r0, r0, #15
+	adr	r4, 1f
+	ldmia	r4, {r5, r6}
+	sub	r4, r4, r5
+	add	r6, r6, r4
+pen:	ldr	r7, [r6]
+	cmp	r7, r0
+	bne	pen
+
+	/* re-enable coherency */
+	mrc	p15, 0, r0, c1, c0, 1
+	orr	r0, r0, #(1 << 6) | (1 << 0)
+	mcr	p15, 0, r0, c1, c0, 1
+	/*
+	 * we've been released from the holding pen: secondary_stack
+	 * should now contain the SVC stack for this core
+	 */
+	b	secondary_startup
+
+	.align
+1:	.long	.
+	.long	pen_release
+ENDPROC(spear13xx_secondary_startup)
diff --git a/arch/arm/mach-spear13xx/hotplug.c b/arch/arm/mach-spear13xx/hotplug.c
new file mode 100644
index 000000000000..5c6867b46d09
--- /dev/null
+++ b/arch/arm/mach-spear13xx/hotplug.c
@@ -0,0 +1,119 @@
+/*
+ * linux/arch/arm/mach-spear13xx/hotplug.c
+ *
+ * Copyright (C) 2012 ST Microelectronics Ltd.
+ * Deepak Sikri <deepak.sikri@st.com>
+ *
+ * based upon linux/arch/arm/mach-realview/hotplug.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/smp.h>
+#include <asm/cacheflush.h>
+#include <asm/cp15.h>
+#include <asm/smp_plat.h>
+
+extern volatile int pen_release;
+
+static inline void cpu_enter_lowpower(void)
+{
+	unsigned int v;
+
+	flush_cache_all();
+	asm volatile(
+	"	mcr	p15, 0, %1, c7, c5, 0\n"
+	"	dsb\n"
+	/*
+	 * Turn off coherency
+	 */
+	"	mrc	p15, 0, %0, c1, c0, 1\n"
+	"	bic	%0, %0, #0x20\n"
+	"	mcr	p15, 0, %0, c1, c0, 1\n"
+	"	mrc	p15, 0, %0, c1, c0, 0\n"
+	"	bic	%0, %0, %2\n"
+	"	mcr	p15, 0, %0, c1, c0, 0\n"
+	: "=&r" (v)
+	: "r" (0), "Ir" (CR_C)
+	: "cc", "memory");
+}
+
+static inline void cpu_leave_lowpower(void)
+{
+	unsigned int v;
+
+	asm volatile("mrc	p15, 0, %0, c1, c0, 0\n"
+	"	orr	%0, %0, %1\n"
+	"	mcr	p15, 0, %0, c1, c0, 0\n"
+	"	mrc	p15, 0, %0, c1, c0, 1\n"
+	"	orr	%0, %0, #0x20\n"
+	"	mcr	p15, 0, %0, c1, c0, 1\n"
+	: "=&r" (v)
+	: "Ir" (CR_C)
+	: "cc");
+}
+
+static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
+{
+	for (;;) {
+		wfi();
+
+		if (pen_release == cpu) {
+			/*
+			 * OK, proper wakeup, we're done
+			 */
+			break;
+		}
+
+		/*
+		 * Getting here, means that we have come out of WFI without
+		 * having been woken up - this shouldn't happen
+		 *
+		 * Just note it happening - when we're woken, we can report
+		 * its occurrence.
+		 */
+		(*spurious)++;
+	}
+}
+
+int platform_cpu_kill(unsigned int cpu)
+{
+	return 1;
+}
+
+/*
+ * platform-specific code to shutdown a CPU
+ *
+ * Called with IRQs disabled
+ */
+void __cpuinit platform_cpu_die(unsigned int cpu)
+{
+	int spurious = 0;
+
+	/*
+	 * we're ready for shutdown now, so do it
+	 */
+	cpu_enter_lowpower();
+	platform_do_lowpower(cpu, &spurious);
+
+	/*
+	 * bring this CPU back into the world of cache
+	 * coherency, and then restore interrupts
+	 */
+	cpu_leave_lowpower();
+
+	if (spurious)
+		pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious);
+}
+
+int platform_cpu_disable(unsigned int cpu)
+{
+	/*
+	 * we don't allow CPU 0 to be shutdown (it is still too special
+	 * e.g. clock tick interrupts)
+	 */
+	return cpu == 0 ? -EPERM : 0;
+}
diff --git a/arch/arm/mach-spear13xx/include/mach/debug-macro.S b/arch/arm/mach-spear13xx/include/mach/debug-macro.S
new file mode 100644
index 000000000000..ea1564609bd4
--- /dev/null
+++ b/arch/arm/mach-spear13xx/include/mach/debug-macro.S
@@ -0,0 +1,14 @@
+/*
+ * arch/arm/mach-spear13xx/include/mach/debug-macro.S
+ *
+ * Debugging macro include header spear13xx machine family
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <plat/debug-macro.S>
diff --git a/arch/arm/mach-spear13xx/include/mach/dma.h b/arch/arm/mach-spear13xx/include/mach/dma.h
new file mode 100644
index 000000000000..383ab04dc6c9
--- /dev/null
+++ b/arch/arm/mach-spear13xx/include/mach/dma.h
@@ -0,0 +1,128 @@
+/*
+ * arch/arm/mach-spear13xx/include/mach/dma.h
+ *
+ * DMA information for SPEAr13xx machine family
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_DMA_H
+#define __MACH_DMA_H
+
+/* request id of all the peripherals */
+enum dma_master_info {
+	/* Accessible from only one master */
+	DMA_MASTER_MCIF = 0,
+	DMA_MASTER_FSMC = 1,
+	/* Accessible from both 0 & 1 */
+	DMA_MASTER_MEMORY = 0,
+	DMA_MASTER_ADC = 0,
+	DMA_MASTER_UART0 = 0,
+	DMA_MASTER_SSP0 = 0,
+	DMA_MASTER_I2C0 = 0,
+
+#ifdef CONFIG_MACH_SPEAR1310
+	/* Accessible from only one master */
+	SPEAR1310_DMA_MASTER_JPEG = 1,
+
+	/* Accessible from both 0 & 1 */
+	SPEAR1310_DMA_MASTER_I2S = 0,
+	SPEAR1310_DMA_MASTER_UART1 = 0,
+	SPEAR1310_DMA_MASTER_UART2 = 0,
+	SPEAR1310_DMA_MASTER_UART3 = 0,
+	SPEAR1310_DMA_MASTER_UART4 = 0,
+	SPEAR1310_DMA_MASTER_UART5 = 0,
+	SPEAR1310_DMA_MASTER_I2C1 = 0,
+	SPEAR1310_DMA_MASTER_I2C2 = 0,
+	SPEAR1310_DMA_MASTER_I2C3 = 0,
+	SPEAR1310_DMA_MASTER_I2C4 = 0,
+	SPEAR1310_DMA_MASTER_I2C5 = 0,
+	SPEAR1310_DMA_MASTER_I2C6 = 0,
+	SPEAR1310_DMA_MASTER_I2C7 = 0,
+	SPEAR1310_DMA_MASTER_SSP1 = 0,
+#endif
+
+#ifdef CONFIG_MACH_SPEAR1340
+	/* Accessible from only one master */
+	SPEAR1340_DMA_MASTER_I2S_PLAY = 1,
+	SPEAR1340_DMA_MASTER_I2S_REC = 1,
+	SPEAR1340_DMA_MASTER_I2C1 = 1,
+	SPEAR1340_DMA_MASTER_UART1 = 1,
+
+	/* following are accessible from both master 0 & 1 */
+	SPEAR1340_DMA_MASTER_SPDIF = 0,
+	SPEAR1340_DMA_MASTER_CAM = 1,
+	SPEAR1340_DMA_MASTER_VIDEO_IN = 0,
+	SPEAR1340_DMA_MASTER_MALI = 0,
+#endif
+};
+
+enum request_id {
+	DMA_REQ_ADC = 0,
+	DMA_REQ_SSP0_TX = 4,
+	DMA_REQ_SSP0_RX = 5,
+	DMA_REQ_UART0_TX = 6,
+	DMA_REQ_UART0_RX = 7,
+	DMA_REQ_I2C0_TX = 8,
+	DMA_REQ_I2C0_RX = 9,
+
+#ifdef CONFIG_MACH_SPEAR1310
+	SPEAR1310_DMA_REQ_FROM_JPEG = 2,
+	SPEAR1310_DMA_REQ_TO_JPEG = 3,
+	SPEAR1310_DMA_REQ_I2S_TX = 10,
+	SPEAR1310_DMA_REQ_I2S_RX = 11,
+
+	SPEAR1310_DMA_REQ_I2C1_RX = 0,
+	SPEAR1310_DMA_REQ_I2C1_TX = 1,
+	SPEAR1310_DMA_REQ_I2C2_RX = 2,
+	SPEAR1310_DMA_REQ_I2C2_TX = 3,
+	SPEAR1310_DMA_REQ_I2C3_RX = 4,
+	SPEAR1310_DMA_REQ_I2C3_TX = 5,
+	SPEAR1310_DMA_REQ_I2C4_RX = 6,
+	SPEAR1310_DMA_REQ_I2C4_TX = 7,
+	SPEAR1310_DMA_REQ_I2C5_RX = 8,
+	SPEAR1310_DMA_REQ_I2C5_TX = 9,
+	SPEAR1310_DMA_REQ_I2C6_RX = 10,
+	SPEAR1310_DMA_REQ_I2C6_TX = 11,
+	SPEAR1310_DMA_REQ_UART1_RX = 12,
+	SPEAR1310_DMA_REQ_UART1_TX = 13,
+	SPEAR1310_DMA_REQ_UART2_RX = 14,
+	SPEAR1310_DMA_REQ_UART2_TX = 15,
+	SPEAR1310_DMA_REQ_UART5_RX = 16,
+	SPEAR1310_DMA_REQ_UART5_TX = 17,
+	SPEAR1310_DMA_REQ_SSP1_RX = 18,
+	SPEAR1310_DMA_REQ_SSP1_TX = 19,
+	SPEAR1310_DMA_REQ_I2C7_RX = 20,
+	SPEAR1310_DMA_REQ_I2C7_TX = 21,
+	SPEAR1310_DMA_REQ_UART3_RX = 28,
+	SPEAR1310_DMA_REQ_UART3_TX = 29,
+	SPEAR1310_DMA_REQ_UART4_RX = 30,
+	SPEAR1310_DMA_REQ_UART4_TX = 31,
+#endif
+
+#ifdef CONFIG_MACH_SPEAR1340
+	SPEAR1340_DMA_REQ_SPDIF_TX = 2,
+	SPEAR1340_DMA_REQ_SPDIF_RX = 3,
+	SPEAR1340_DMA_REQ_I2S_TX = 10,
+	SPEAR1340_DMA_REQ_I2S_RX = 11,
+	SPEAR1340_DMA_REQ_UART1_TX = 12,
+	SPEAR1340_DMA_REQ_UART1_RX = 13,
+	SPEAR1340_DMA_REQ_I2C1_TX = 14,
+	SPEAR1340_DMA_REQ_I2C1_RX = 15,
+	SPEAR1340_DMA_REQ_CAM0_EVEN = 0,
+	SPEAR1340_DMA_REQ_CAM0_ODD = 1,
+	SPEAR1340_DMA_REQ_CAM1_EVEN = 2,
+	SPEAR1340_DMA_REQ_CAM1_ODD = 3,
+	SPEAR1340_DMA_REQ_CAM2_EVEN = 4,
+	SPEAR1340_DMA_REQ_CAM2_ODD = 5,
+	SPEAR1340_DMA_REQ_CAM3_EVEN = 6,
+	SPEAR1340_DMA_REQ_CAM3_ODD = 7,
+#endif
+};
+
+#endif /* __MACH_DMA_H */
diff --git a/arch/arm/mach-spear13xx/include/mach/generic.h b/arch/arm/mach-spear13xx/include/mach/generic.h
new file mode 100644
index 000000000000..6d8c45b9f298
--- /dev/null
+++ b/arch/arm/mach-spear13xx/include/mach/generic.h
@@ -0,0 +1,49 @@
+/*
+ * arch/arm/mach-spear13xx/include/mach/generic.h
+ *
+ * spear13xx machine family generic header file
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_GENERIC_H
+#define __MACH_GENERIC_H
+
+#include <linux/dmaengine.h>
+#include <asm/mach/time.h>
+
+/* Add spear13xx structure declarations here */
+extern struct sys_timer spear13xx_timer;
+extern struct pl022_ssp_controller pl022_plat_data;
+extern struct dw_dma_platform_data dmac_plat_data;
+extern struct dw_dma_slave cf_dma_priv;
+extern struct dw_dma_slave nand_read_dma_priv;
+extern struct dw_dma_slave nand_write_dma_priv;
+
+/* Add spear13xx family function declarations here */
+void __init spear_setup_of_timer(void);
+void __init spear13xx_map_io(void);
+void __init spear13xx_dt_init_irq(void);
+void __init spear13xx_l2x0_init(void);
+bool dw_dma_filter(struct dma_chan *chan, void *slave);
+void spear_restart(char, const char *);
+void spear13xx_secondary_startup(void);
+
+#ifdef CONFIG_MACH_SPEAR1310
+void __init spear1310_clk_init(void);
+#else
+static inline void spear1310_clk_init(void) {}
+#endif
+
+#ifdef CONFIG_MACH_SPEAR1340
+void __init spear1340_clk_init(void);
+#else
+static inline void spear1340_clk_init(void) {}
+#endif
+
+#endif /* __MACH_GENERIC_H */
diff --git a/arch/arm/mach-spear13xx/include/mach/gpio.h b/arch/arm/mach-spear13xx/include/mach/gpio.h
new file mode 100644
index 000000000000..cd6f4f86a56b
--- /dev/null
+++ b/arch/arm/mach-spear13xx/include/mach/gpio.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear13xx/include/mach/gpio.h
+ *
+ * GPIO macros for SPEAr13xx machine family
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_GPIO_H
+#define __MACH_GPIO_H
+
+#include <plat/gpio.h>
+
+#endif /* __MACH_GPIO_H */
diff --git a/arch/arm/mach-spear13xx/include/mach/hardware.h b/arch/arm/mach-spear13xx/include/mach/hardware.h
new file mode 100644
index 000000000000..40a8c178f10d
--- /dev/null
+++ b/arch/arm/mach-spear13xx/include/mach/hardware.h
@@ -0,0 +1 @@
+/* empty */
diff --git a/arch/arm/mach-spear13xx/include/mach/irqs.h b/arch/arm/mach-spear13xx/include/mach/irqs.h
new file mode 100644
index 000000000000..f542a24aa5f2
--- /dev/null
+++ b/arch/arm/mach-spear13xx/include/mach/irqs.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-spear13xx/include/mach/irqs.h
+ *
+ * IRQ helper macros for spear13xx machine family
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_IRQS_H
+#define __MACH_IRQS_H
+
+#define IRQ_GIC_END			160
+#define NR_IRQS				IRQ_GIC_END
+
+#endif /* __MACH_IRQS_H */
diff --git a/arch/arm/mach-spear13xx/include/mach/spear.h b/arch/arm/mach-spear13xx/include/mach/spear.h
new file mode 100644
index 000000000000..30c57ef72686
--- /dev/null
+++ b/arch/arm/mach-spear13xx/include/mach/spear.h
@@ -0,0 +1,62 @@
+/*
+ * arch/arm/mach-spear13xx/include/mach/spear.h
+ *
+ * spear13xx Machine family specific definition
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_SPEAR13XX_H
+#define __MACH_SPEAR13XX_H
+
+#include <asm/memory.h>
+
+#define PERIP_GRP2_BASE				UL(0xB3000000)
+#define VA_PERIP_GRP2_BASE			UL(0xFE000000)
+#define MCIF_SDHCI_BASE				UL(0xB3000000)
+#define SYSRAM0_BASE				UL(0xB3800000)
+#define VA_SYSRAM0_BASE				UL(0xFE800000)
+#define SYS_LOCATION				(VA_SYSRAM0_BASE + 0x600)
+
+#define PERIP_GRP1_BASE				UL(0xE0000000)
+#define VA_PERIP_GRP1_BASE			UL(0xFD000000)
+#define UART_BASE				UL(0xE0000000)
+#define VA_UART_BASE				UL(0xFD000000)
+#define SSP_BASE				UL(0xE0100000)
+#define MISC_BASE				UL(0xE0700000)
+#define VA_MISC_BASE				IOMEM(UL(0xFD700000))
+
+#define A9SM_AND_MPMC_BASE			UL(0xEC000000)
+#define VA_A9SM_AND_MPMC_BASE			UL(0xFC000000)
+
+/* A9SM peripheral offsets */
+#define A9SM_PERIP_BASE				UL(0xEC800000)
+#define VA_A9SM_PERIP_BASE			UL(0xFC800000)
+#define VA_SCU_BASE				(VA_A9SM_PERIP_BASE + 0x00)
+
+#define L2CC_BASE				UL(0xED000000)
+#define VA_L2CC_BASE				IOMEM(UL(0xFB000000))
+
+/* others */
+#define DMAC0_BASE				UL(0xEA800000)
+#define DMAC1_BASE				UL(0xEB000000)
+#define MCIF_CF_BASE				UL(0xB2800000)
+
+/* Devices present in SPEAr1310 */
+#ifdef CONFIG_MACH_SPEAR1310
+#define SPEAR1310_RAS_GRP1_BASE			UL(0xD8000000)
+#define VA_SPEAR1310_RAS_GRP1_BASE		UL(0xFA000000)
+#define SPEAR1310_RAS_BASE			UL(0xD8400000)
+#define VA_SPEAR1310_RAS_BASE			IOMEM(UL(0xFA400000))
+#endif /* CONFIG_MACH_SPEAR1310 */
+
+/* Debug uart for linux, will be used for debug and uncompress messages */
+#define SPEAR_DBG_UART_BASE			UART_BASE
+#define VA_SPEAR_DBG_UART_BASE			VA_UART_BASE
+
+#endif /* __MACH_SPEAR13XX_H */
diff --git a/arch/arm/mach-spear13xx/include/mach/spear1310_misc_regs.h b/arch/arm/mach-spear13xx/include/mach/spear1310_misc_regs.h
new file mode 100644
index 000000000000..e69de29bb2d1
--- /dev/null
+++ b/arch/arm/mach-spear13xx/include/mach/spear1310_misc_regs.h
diff --git a/arch/arm/mach-spear13xx/include/mach/spear1340_misc_regs.h b/arch/arm/mach-spear13xx/include/mach/spear1340_misc_regs.h
new file mode 100644
index 000000000000..e69de29bb2d1
--- /dev/null
+++ b/arch/arm/mach-spear13xx/include/mach/spear1340_misc_regs.h
diff --git a/arch/arm/mach-spear13xx/include/mach/timex.h b/arch/arm/mach-spear13xx/include/mach/timex.h
new file mode 100644
index 000000000000..31af3e8d976e
--- /dev/null
+++ b/arch/arm/mach-spear13xx/include/mach/timex.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/timex.h
+ *
+ * SPEAr3XX machine family specific timex definitions
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_TIMEX_H
+#define __MACH_TIMEX_H
+
+#include <plat/timex.h>
+
+#endif /* __MACH_TIMEX_H */
diff --git a/arch/arm/mach-spear13xx/include/mach/uncompress.h b/arch/arm/mach-spear13xx/include/mach/uncompress.h
new file mode 100644
index 000000000000..c7840896ae6e
--- /dev/null
+++ b/arch/arm/mach-spear13xx/include/mach/uncompress.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear13xx/include/mach/uncompress.h
+ *
+ * Serial port stubs for kernel decompress status messages
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_UNCOMPRESS_H
+#define __MACH_UNCOMPRESS_H
+
+#include <plat/uncompress.h>
+
+#endif /* __MACH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-spear13xx/platsmp.c b/arch/arm/mach-spear13xx/platsmp.c
new file mode 100644
index 000000000000..f5d07f2663d7
--- /dev/null
+++ b/arch/arm/mach-spear13xx/platsmp.c
@@ -0,0 +1,127 @@
+/*
+ * arch/arm/mach-spear13xx/platsmp.c
+ *
+ * based upon linux/arch/arm/mach-realview/platsmp.c
+ *
+ * Copyright (C) 2012 ST Microelectronics Ltd.
+ * Shiraz Hashim <shiraz.hashim@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include <linux/io.h>
+#include <linux/smp.h>
+#include <asm/cacheflush.h>
+#include <asm/hardware/gic.h>
+#include <asm/smp_scu.h>
+#include <mach/spear.h>
+
+/*
+ * control for which core is the next to come out of the secondary
+ * boot "holding pen"
+ */
+volatile int __cpuinitdata pen_release = -1;
+static DEFINE_SPINLOCK(boot_lock);
+
+static void __iomem *scu_base = IOMEM(VA_SCU_BASE);
+extern void spear13xx_secondary_startup(void);
+
+void __cpuinit platform_secondary_init(unsigned int cpu)
+{
+	/*
+	 * if any interrupts are already enabled for the primary
+	 * core (e.g. timer irq), then they will not have been enabled
+	 * for us: do so
+	 */
+	gic_secondary_init(0);
+
+	/*
+	 * let the primary processor know we're out of the
+	 * pen, then head off into the C entry point
+	 */
+	pen_release = -1;
+	smp_wmb();
+
+	/*
+	 * Synchronise with the boot thread.
+	 */
+	spin_lock(&boot_lock);
+	spin_unlock(&boot_lock);
+}
+
+int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	unsigned long timeout;
+
+	/*
+	 * set synchronisation state between this boot processor
+	 * and the secondary one
+	 */
+	spin_lock(&boot_lock);
+
+	/*
+	 * The secondary processor is waiting to be released from
+	 * the holding pen - release it, then wait for it to flag
+	 * that it has been released by resetting pen_release.
+	 *
+	 * Note that "pen_release" is the hardware CPU ID, whereas
+	 * "cpu" is Linux's internal ID.
+	 */
+	pen_release = cpu;
+	flush_cache_all();
+	outer_flush_all();
+
+	timeout = jiffies + (1 * HZ);
+	while (time_before(jiffies, timeout)) {
+		smp_rmb();
+		if (pen_release == -1)
+			break;
+
+		udelay(10);
+	}
+
+	/*
+	 * now the secondary core is starting up let it run its
+	 * calibrations, then wait for it to finish
+	 */
+	spin_unlock(&boot_lock);
+
+	return pen_release != -1 ? -ENOSYS : 0;
+}
+
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system.
+ */
+void __init smp_init_cpus(void)
+{
+	unsigned int i, ncores = scu_get_core_count(scu_base);
+
+	if (ncores > nr_cpu_ids) {
+		pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
+			ncores, nr_cpu_ids);
+		ncores = nr_cpu_ids;
+	}
+
+	for (i = 0; i < ncores; i++)
+		set_cpu_possible(i, true);
+
+	set_smp_cross_call(gic_raise_softirq);
+}
+
+void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+{
+
+	scu_enable(scu_base);
+
+	/*
+	 * Write the address of secondary startup into the system-wide location
+	 * (presently it is in SRAM). The BootMonitor waits until it receives a
+	 * soft interrupt, and then the secondary CPU branches to this address.
+	 */
+	__raw_writel(virt_to_phys(spear13xx_secondary_startup), SYS_LOCATION);
+}
diff --git a/arch/arm/mach-spear13xx/spear1310.c b/arch/arm/mach-spear13xx/spear1310.c
new file mode 100644
index 000000000000..fefd15b2f380
--- /dev/null
+++ b/arch/arm/mach-spear13xx/spear1310.c
@@ -0,0 +1,88 @@
+/*
+ * arch/arm/mach-spear13xx/spear1310.c
+ *
+ * SPEAr1310 machine source file
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define pr_fmt(fmt) "SPEAr1310: " fmt
+
+#include <linux/amba/pl022.h>
+#include <linux/of_platform.h>
+#include <asm/hardware/gic.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <mach/generic.h>
+#include <mach/spear.h>
+
+/* Base addresses */
+#define SPEAR1310_SSP1_BASE			UL(0x5D400000)
+#define SPEAR1310_SATA0_BASE			UL(0xB1000000)
+#define SPEAR1310_SATA1_BASE			UL(0xB1800000)
+#define SPEAR1310_SATA2_BASE			UL(0xB4000000)
+
+/* ssp device registration */
+static struct pl022_ssp_controller ssp1_plat_data = {
+	.bus_id = 0,
+	.enable_dma = 0,
+	.num_chipselect = 3,
+};
+
+/* Add SPEAr1310 auxdata to pass platform data */
+static struct of_dev_auxdata spear1310_auxdata_lookup[] __initdata = {
+	OF_DEV_AUXDATA("arasan,cf-spear1340", MCIF_CF_BASE, NULL, &cf_dma_priv),
+	OF_DEV_AUXDATA("snps,dma-spear1340", DMAC0_BASE, NULL, &dmac_plat_data),
+	OF_DEV_AUXDATA("snps,dma-spear1340", DMAC1_BASE, NULL, &dmac_plat_data),
+	OF_DEV_AUXDATA("arm,pl022", SSP_BASE, NULL, &pl022_plat_data),
+
+	OF_DEV_AUXDATA("arm,pl022", SPEAR1310_SSP1_BASE, NULL, &ssp1_plat_data),
+	{}
+};
+
+static void __init spear1310_dt_init(void)
+{
+	of_platform_populate(NULL, of_default_bus_match_table,
+			spear1310_auxdata_lookup, NULL);
+}
+
+static const char * const spear1310_dt_board_compat[] = {
+	"st,spear1310",
+	"st,spear1310-evb",
+	NULL,
+};
+
+/*
+ * Following will create 16MB static virtual/physical mappings
+ * PHYSICAL		VIRTUAL
+ * 0xD8000000		0xFA000000
+ */
+struct map_desc spear1310_io_desc[] __initdata = {
+	{
+		.virtual	= VA_SPEAR1310_RAS_GRP1_BASE,
+		.pfn		= __phys_to_pfn(SPEAR1310_RAS_GRP1_BASE),
+		.length		= SZ_16M,
+		.type		= MT_DEVICE
+	},
+};
+
+static void __init spear1310_map_io(void)
+{
+	iotable_init(spear1310_io_desc, ARRAY_SIZE(spear1310_io_desc));
+	spear13xx_map_io();
+}
+
+DT_MACHINE_START(SPEAR1310_DT, "ST SPEAr1310 SoC with Flattened Device Tree")
+	.map_io		=	spear1310_map_io,
+	.init_irq	=	spear13xx_dt_init_irq,
+	.handle_irq	=	gic_handle_irq,
+	.timer		=	&spear13xx_timer,
+	.init_machine	=	spear1310_dt_init,
+	.restart	=	spear_restart,
+	.dt_compat	=	spear1310_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-spear13xx/spear1340.c b/arch/arm/mach-spear13xx/spear1340.c
new file mode 100644
index 000000000000..ee38cbc56869
--- /dev/null
+++ b/arch/arm/mach-spear13xx/spear1340.c
@@ -0,0 +1,192 @@
+/*
+ * arch/arm/mach-spear13xx/spear1340.c
+ *
+ * SPEAr1340 machine source file
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define pr_fmt(fmt) "SPEAr1340: " fmt
+
+#include <linux/ahci_platform.h>
+#include <linux/amba/serial.h>
+#include <linux/delay.h>
+#include <linux/dw_dmac.h>
+#include <linux/of_platform.h>
+#include <asm/hardware/gic.h>
+#include <asm/mach/arch.h>
+#include <mach/dma.h>
+#include <mach/generic.h>
+#include <mach/spear.h>
+
+/* Base addresses */
+#define SPEAR1340_SATA_BASE			UL(0xB1000000)
+#define SPEAR1340_UART1_BASE			UL(0xB4100000)
+
+/* Power Management Registers */
+#define SPEAR1340_PCM_CFG			(VA_MISC_BASE + 0x100)
+#define SPEAR1340_PCM_WKUP_CFG			(VA_MISC_BASE + 0x104)
+#define SPEAR1340_SWITCH_CTR			(VA_MISC_BASE + 0x108)
+
+#define SPEAR1340_PERIP1_SW_RST			(VA_MISC_BASE + 0x318)
+#define SPEAR1340_PERIP2_SW_RST			(VA_MISC_BASE + 0x31C)
+#define SPEAR1340_PERIP3_SW_RST			(VA_MISC_BASE + 0x320)
+
+/* PCIE - SATA configuration registers */
+#define SPEAR1340_PCIE_SATA_CFG			(VA_MISC_BASE + 0x424)
+	/* PCIE CFG MASks */
+	#define SPEAR1340_PCIE_CFG_DEVICE_PRESENT	(1 << 11)
+	#define SPEAR1340_PCIE_CFG_POWERUP_RESET	(1 << 10)
+	#define SPEAR1340_PCIE_CFG_CORE_CLK_EN		(1 << 9)
+	#define SPEAR1340_PCIE_CFG_AUX_CLK_EN		(1 << 8)
+	#define SPEAR1340_SATA_CFG_TX_CLK_EN		(1 << 4)
+	#define SPEAR1340_SATA_CFG_RX_CLK_EN		(1 << 3)
+	#define SPEAR1340_SATA_CFG_POWERUP_RESET	(1 << 2)
+	#define SPEAR1340_SATA_CFG_PM_CLK_EN		(1 << 1)
+	#define SPEAR1340_PCIE_SATA_SEL_PCIE		(0)
+	#define SPEAR1340_PCIE_SATA_SEL_SATA		(1)
+	#define SPEAR1340_SATA_PCIE_CFG_MASK		0xF1F
+	#define SPEAR1340_PCIE_CFG_VAL	(SPEAR1340_PCIE_SATA_SEL_PCIE | \
+			SPEAR1340_PCIE_CFG_AUX_CLK_EN | \
+			SPEAR1340_PCIE_CFG_CORE_CLK_EN | \
+			SPEAR1340_PCIE_CFG_POWERUP_RESET | \
+			SPEAR1340_PCIE_CFG_DEVICE_PRESENT)
+	#define SPEAR1340_SATA_CFG_VAL	(SPEAR1340_PCIE_SATA_SEL_SATA | \
+			SPEAR1340_SATA_CFG_PM_CLK_EN | \
+			SPEAR1340_SATA_CFG_POWERUP_RESET | \
+			SPEAR1340_SATA_CFG_RX_CLK_EN | \
+			SPEAR1340_SATA_CFG_TX_CLK_EN)
+
+#define SPEAR1340_PCIE_MIPHY_CFG		(VA_MISC_BASE + 0x428)
+	#define SPEAR1340_MIPHY_OSC_BYPASS_EXT		(1 << 31)
+	#define SPEAR1340_MIPHY_CLK_REF_DIV2		(1 << 27)
+	#define SPEAR1340_MIPHY_CLK_REF_DIV4		(2 << 27)
+	#define SPEAR1340_MIPHY_CLK_REF_DIV8		(3 << 27)
+	#define SPEAR1340_MIPHY_PLL_RATIO_TOP(x)	(x << 0)
+	#define SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA \
+			(SPEAR1340_MIPHY_OSC_BYPASS_EXT | \
+			SPEAR1340_MIPHY_CLK_REF_DIV2 | \
+			SPEAR1340_MIPHY_PLL_RATIO_TOP(60))
+	#define SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK \
+			(SPEAR1340_MIPHY_PLL_RATIO_TOP(120))
+	#define SPEAR1340_PCIE_SATA_MIPHY_CFG_PCIE \
+			(SPEAR1340_MIPHY_OSC_BYPASS_EXT | \
+			SPEAR1340_MIPHY_PLL_RATIO_TOP(25))
+
+static struct dw_dma_slave uart1_dma_param[] = {
+	{
+		/* Tx */
+		.cfg_hi = DWC_CFGH_DST_PER(SPEAR1340_DMA_REQ_UART1_TX),
+		.cfg_lo = 0,
+		.src_master = DMA_MASTER_MEMORY,
+		.dst_master = SPEAR1340_DMA_MASTER_UART1,
+	}, {
+		/* Rx */
+		.cfg_hi = DWC_CFGH_SRC_PER(SPEAR1340_DMA_REQ_UART1_RX),
+		.cfg_lo = 0,
+		.src_master = SPEAR1340_DMA_MASTER_UART1,
+		.dst_master = DMA_MASTER_MEMORY,
+	}
+};
+
+static struct amba_pl011_data uart1_data = {
+	.dma_filter = dw_dma_filter,
+	.dma_tx_param = &uart1_dma_param[0],
+	.dma_rx_param = &uart1_dma_param[1],
+};
+
+/* SATA device registration */
+static int sata_miphy_init(struct device *dev, void __iomem *addr)
+{
+	writel(SPEAR1340_SATA_CFG_VAL, SPEAR1340_PCIE_SATA_CFG);
+	writel(SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK,
+			SPEAR1340_PCIE_MIPHY_CFG);
+	/* Switch on sata power domain */
+	writel((readl(SPEAR1340_PCM_CFG) | (0x800)), SPEAR1340_PCM_CFG);
+	msleep(20);
+	/* Disable PCIE SATA Controller reset */
+	writel((readl(SPEAR1340_PERIP1_SW_RST) & (~0x1000)),
+			SPEAR1340_PERIP1_SW_RST);
+	msleep(20);
+
+	return 0;
+}
+
+void sata_miphy_exit(struct device *dev)
+{
+	writel(0, SPEAR1340_PCIE_SATA_CFG);
+	writel(0, SPEAR1340_PCIE_MIPHY_CFG);
+
+	/* Enable PCIE SATA Controller reset */
+	writel((readl(SPEAR1340_PERIP1_SW_RST) | (0x1000)),
+			SPEAR1340_PERIP1_SW_RST);
+	msleep(20);
+	/* Switch off sata power domain */
+	writel((readl(SPEAR1340_PCM_CFG) & (~0x800)), SPEAR1340_PCM_CFG);
+	msleep(20);
+}
+
+int sata_suspend(struct device *dev)
+{
+	if (dev->power.power_state.event == PM_EVENT_FREEZE)
+		return 0;
+
+	sata_miphy_exit(dev);
+
+	return 0;
+}
+
+int sata_resume(struct device *dev)
+{
+	if (dev->power.power_state.event == PM_EVENT_THAW)
+		return 0;
+
+	return sata_miphy_init(dev, NULL);
+}
+
+static struct ahci_platform_data sata_pdata = {
+	.init = sata_miphy_init,
+	.exit = sata_miphy_exit,
+	.suspend = sata_suspend,
+	.resume = sata_resume,
+};
+
+/* Add SPEAr1340 auxdata to pass platform data */
+static struct of_dev_auxdata spear1340_auxdata_lookup[] __initdata = {
+	OF_DEV_AUXDATA("arasan,cf-spear1340", MCIF_CF_BASE, NULL, &cf_dma_priv),
+	OF_DEV_AUXDATA("snps,dma-spear1340", DMAC0_BASE, NULL, &dmac_plat_data),
+	OF_DEV_AUXDATA("snps,dma-spear1340", DMAC1_BASE, NULL, &dmac_plat_data),
+	OF_DEV_AUXDATA("arm,pl022", SSP_BASE, NULL, &pl022_plat_data),
+
+	OF_DEV_AUXDATA("snps,spear-ahci", SPEAR1340_SATA_BASE, NULL,
+			&sata_pdata),
+	OF_DEV_AUXDATA("arm,pl011", SPEAR1340_UART1_BASE, NULL, &uart1_data),
+	{}
+};
+
+static void __init spear1340_dt_init(void)
+{
+	of_platform_populate(NULL, of_default_bus_match_table,
+			spear1340_auxdata_lookup, NULL);
+}
+
+static const char * const spear1340_dt_board_compat[] = {
+	"st,spear1340",
+	"st,spear1340-evb",
+	NULL,
+};
+
+DT_MACHINE_START(SPEAR1340_DT, "ST SPEAr1340 SoC with Flattened Device Tree")
+	.map_io		=	spear13xx_map_io,
+	.init_irq	=	spear13xx_dt_init_irq,
+	.handle_irq	=	gic_handle_irq,
+	.timer		=	&spear13xx_timer,
+	.init_machine	=	spear1340_dt_init,
+	.restart	=	spear_restart,
+	.dt_compat	=	spear1340_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-spear13xx/spear13xx.c b/arch/arm/mach-spear13xx/spear13xx.c
new file mode 100644
index 000000000000..50b349ae863d
--- /dev/null
+++ b/arch/arm/mach-spear13xx/spear13xx.c
@@ -0,0 +1,197 @@
+/*
+ * arch/arm/mach-spear13xx/spear13xx.c
+ *
+ * SPEAr13XX machines common source file
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define pr_fmt(fmt) "SPEAr13xx: " fmt
+
+#include <linux/amba/pl022.h>
+#include <linux/clk.h>
+#include <linux/dw_dmac.h>
+#include <linux/err.h>
+#include <linux/of_irq.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/hardware/gic.h>
+#include <asm/mach/map.h>
+#include <asm/smp_twd.h>
+#include <mach/dma.h>
+#include <mach/generic.h>
+#include <mach/spear.h>
+
+/* common dw_dma filter routine to be used by peripherals */
+bool dw_dma_filter(struct dma_chan *chan, void *slave)
+{
+	struct dw_dma_slave *dws = (struct dw_dma_slave *)slave;
+
+	if (chan->device->dev == dws->dma_dev) {
+		chan->private = slave;
+		return true;
+	} else {
+		return false;
+	}
+}
+
+/* ssp device registration */
+static struct dw_dma_slave ssp_dma_param[] = {
+	{
+		/* Tx */
+		.cfg_hi = DWC_CFGH_DST_PER(DMA_REQ_SSP0_TX),
+		.cfg_lo = 0,
+		.src_master = DMA_MASTER_MEMORY,
+		.dst_master = DMA_MASTER_SSP0,
+	}, {
+		/* Rx */
+		.cfg_hi = DWC_CFGH_SRC_PER(DMA_REQ_SSP0_RX),
+		.cfg_lo = 0,
+		.src_master = DMA_MASTER_SSP0,
+		.dst_master = DMA_MASTER_MEMORY,
+	}
+};
+
+struct pl022_ssp_controller pl022_plat_data = {
+	.bus_id = 0,
+	.enable_dma = 1,
+	.dma_filter = dw_dma_filter,
+	.dma_rx_param = &ssp_dma_param[1],
+	.dma_tx_param = &ssp_dma_param[0],
+	.num_chipselect = 3,
+};
+
+/* CF device registration */
+struct dw_dma_slave cf_dma_priv = {
+	.cfg_hi = 0,
+	.cfg_lo = 0,
+	.src_master = 0,
+	.dst_master = 0,
+};
+
+/* dmac device registeration */
+struct dw_dma_platform_data dmac_plat_data = {
+	.nr_channels = 8,
+	.chan_allocation_order = CHAN_ALLOCATION_DESCENDING,
+	.chan_priority = CHAN_PRIORITY_DESCENDING,
+};
+
+void __init spear13xx_l2x0_init(void)
+{
+	/*
+	 * 512KB (64KB/way), 8-way associativity, parity supported
+	 *
+	 * FIXME: 9th bit, of Auxillary Controller register must be set
+	 * for some spear13xx devices for stable L2 operation.
+	 *
+	 * Enable Early BRESP, L2 prefetch for Instruction and Data,
+	 * write alloc and 'Full line of zero' options
+	 *
+	 */
+
+	writel_relaxed(0x06, VA_L2CC_BASE + L2X0_PREFETCH_CTRL);
+
+	/*
+	 * Program following latencies in order to make
+	 * SPEAr1340 work at 600 MHz
+	 */
+	writel_relaxed(0x221, VA_L2CC_BASE + L2X0_TAG_LATENCY_CTRL);
+	writel_relaxed(0x441, VA_L2CC_BASE + L2X0_DATA_LATENCY_CTRL);
+	l2x0_init(VA_L2CC_BASE, 0x70A60001, 0xfe00ffff);
+}
+
+/*
+ * Following will create 16MB static virtual/physical mappings
+ * PHYSICAL		VIRTUAL
+ * 0xB3000000		0xFE000000
+ * 0xE0000000		0xFD000000
+ * 0xEC000000		0xFC000000
+ * 0xED000000		0xFB000000
+ */
+struct map_desc spear13xx_io_desc[] __initdata = {
+	{
+		.virtual	= VA_PERIP_GRP2_BASE,
+		.pfn		= __phys_to_pfn(PERIP_GRP2_BASE),
+		.length		= SZ_16M,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= VA_PERIP_GRP1_BASE,
+		.pfn		= __phys_to_pfn(PERIP_GRP1_BASE),
+		.length		= SZ_16M,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= VA_A9SM_AND_MPMC_BASE,
+		.pfn		= __phys_to_pfn(A9SM_AND_MPMC_BASE),
+		.length		= SZ_16M,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= (unsigned long)VA_L2CC_BASE,
+		.pfn		= __phys_to_pfn(L2CC_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	},
+};
+
+/* This will create static memory mapping for selected devices */
+void __init spear13xx_map_io(void)
+{
+	iotable_init(spear13xx_io_desc, ARRAY_SIZE(spear13xx_io_desc));
+}
+
+static void __init spear13xx_clk_init(void)
+{
+	if (of_machine_is_compatible("st,spear1310"))
+		spear1310_clk_init();
+	else if (of_machine_is_compatible("st,spear1340"))
+		spear1340_clk_init();
+	else
+		pr_err("%s: Unknown machine\n", __func__);
+}
+
+static void __init spear13xx_timer_init(void)
+{
+	char pclk_name[] = "osc_24m_clk";
+	struct clk *gpt_clk, *pclk;
+
+	spear13xx_clk_init();
+
+	/* get the system timer clock */
+	gpt_clk = clk_get_sys("gpt0", NULL);
+	if (IS_ERR(gpt_clk)) {
+		pr_err("%s:couldn't get clk for gpt\n", __func__);
+		BUG();
+	}
+
+	/* get the suitable parent clock for timer*/
+	pclk = clk_get(NULL, pclk_name);
+	if (IS_ERR(pclk)) {
+		pr_err("%s:couldn't get %s as parent for gpt\n", __func__,
+				pclk_name);
+		BUG();
+	}
+
+	clk_set_parent(gpt_clk, pclk);
+	clk_put(gpt_clk);
+	clk_put(pclk);
+
+	spear_setup_of_timer();
+	twd_local_timer_of_register();
+}
+
+struct sys_timer spear13xx_timer = {
+	.init = spear13xx_timer_init,
+};
+
+static const struct of_device_id gic_of_match[] __initconst = {
+	{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init },
+	{ /* Sentinel */ }
+};
+
+void __init spear13xx_dt_init_irq(void)
+{
+	of_irq_init(gic_of_match);
+}
diff --git a/arch/arm/mach-spear3xx/Kconfig b/arch/arm/mach-spear3xx/Kconfig
index 2cee6b0de371..8bd37291fa4f 100644
--- a/arch/arm/mach-spear3xx/Kconfig
+++ b/arch/arm/mach-spear3xx/Kconfig
@@ -5,39 +5,22 @@
 if ARCH_SPEAR3XX
 
 menu "SPEAr3xx Implementations"
-config BOARD_SPEAR300_EVB
-	bool "SPEAr300 Evaluation Board"
-	select MACH_SPEAR300
-	help
-	  Supports ST SPEAr300 Evaluation Board
-
-config BOARD_SPEAR310_EVB
-	bool "SPEAr310 Evaluation Board"
-	select MACH_SPEAR310
-	help
-	  Supports ST SPEAr310 Evaluation Board
-
-config BOARD_SPEAR320_EVB
-	bool "SPEAr320 Evaluation Board"
-	select MACH_SPEAR320
-	help
-	  Supports ST SPEAr320 Evaluation Board
-
-endmenu
-
 config MACH_SPEAR300
-	bool "SPEAr300"
+	bool "SPEAr300 Machine support with Device Tree"
+	select PINCTRL_SPEAR300
 	help
-	  Supports ST SPEAr300 Machine
+	  Supports ST SPEAr300 machine configured via the device-tree
 
 config MACH_SPEAR310
-	bool "SPEAr310"
+	bool "SPEAr310 Machine support with Device Tree"
+	select PINCTRL_SPEAR310
 	help
-	  Supports ST SPEAr310 Machine
+	  Supports ST SPEAr310 machine configured via the device-tree
 
 config MACH_SPEAR320
-	bool "SPEAr320"
+	bool "SPEAr320 Machine support with Device Tree"
+	select PINCTRL_SPEAR320
 	help
-	  Supports ST SPEAr320 Machine
-
+	  Supports ST SPEAr320 machine configured via the device-tree
+endmenu
 endif #ARCH_SPEAR3XX
diff --git a/arch/arm/mach-spear3xx/Makefile b/arch/arm/mach-spear3xx/Makefile
index b24862489704..8d12faa178fd 100644
--- a/arch/arm/mach-spear3xx/Makefile
+++ b/arch/arm/mach-spear3xx/Makefile
@@ -3,24 +3,13 @@
 #
 
 # common files
-obj-y	+= spear3xx.o clock.o
+obj-$(CONFIG_ARCH_SPEAR3XX)	+= spear3xx.o
 
 # spear300 specific files
 obj-$(CONFIG_MACH_SPEAR300) += spear300.o
 
-# spear300 boards files
-obj-$(CONFIG_BOARD_SPEAR300_EVB) += spear300_evb.o
-
-
 # spear310 specific files
 obj-$(CONFIG_MACH_SPEAR310) += spear310.o
 
-# spear310 boards files
-obj-$(CONFIG_BOARD_SPEAR310_EVB) += spear310_evb.o
-
-
 # spear320 specific files
 obj-$(CONFIG_MACH_SPEAR320) += spear320.o
-
-# spear320 boards files
-obj-$(CONFIG_BOARD_SPEAR320_EVB) += spear320_evb.o
diff --git a/arch/arm/mach-spear3xx/Makefile.boot b/arch/arm/mach-spear3xx/Makefile.boot
index 4674a4c221db..d93e2177e6ec 100644
--- a/arch/arm/mach-spear3xx/Makefile.boot
+++ b/arch/arm/mach-spear3xx/Makefile.boot
@@ -1,3 +1,7 @@
 zreladdr-y	+= 0x00008000
 params_phys-y	:= 0x00000100
 initrd_phys-y	:= 0x00800000
+
+dtb-$(CONFIG_MACH_SPEAR300)	+= spear300-evb.dtb
+dtb-$(CONFIG_MACH_SPEAR310)	+= spear310-evb.dtb
+dtb-$(CONFIG_MACH_SPEAR320)	+= spear320-evb.dtb
diff --git a/arch/arm/mach-spear3xx/clock.c b/arch/arm/mach-spear3xx/clock.c
deleted file mode 100644
index 6c4841f55223..000000000000
--- a/arch/arm/mach-spear3xx/clock.c
+++ /dev/null
@@ -1,760 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/clock.c
- *
- * SPEAr3xx machines clock framework source file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <asm/mach-types.h>
-#include <plat/clock.h>
-#include <mach/misc_regs.h>
-
-/* root clks */
-/* 32 KHz oscillator clock */
-static struct clk osc_32k_clk = {
-	.flags = ALWAYS_ENABLED,
-	.rate = 32000,
-};
-
-/* 24 MHz oscillator clock */
-static struct clk osc_24m_clk = {
-	.flags = ALWAYS_ENABLED,
-	.rate = 24000000,
-};
-
-/* clock derived from 32 KHz osc clk */
-/* rtc clock */
-static struct clk rtc_clk = {
-	.pclk = &osc_32k_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = RTC_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* clock derived from 24 MHz osc clk */
-/* pll masks structure */
-static struct pll_clk_masks pll1_masks = {
-	.mode_mask = PLL_MODE_MASK,
-	.mode_shift = PLL_MODE_SHIFT,
-	.norm_fdbk_m_mask = PLL_NORM_FDBK_M_MASK,
-	.norm_fdbk_m_shift = PLL_NORM_FDBK_M_SHIFT,
-	.dith_fdbk_m_mask = PLL_DITH_FDBK_M_MASK,
-	.dith_fdbk_m_shift = PLL_DITH_FDBK_M_SHIFT,
-	.div_p_mask = PLL_DIV_P_MASK,
-	.div_p_shift = PLL_DIV_P_SHIFT,
-	.div_n_mask = PLL_DIV_N_MASK,
-	.div_n_shift = PLL_DIV_N_SHIFT,
-};
-
-/* pll1 configuration structure */
-static struct pll_clk_config pll1_config = {
-	.mode_reg = PLL1_CTR,
-	.cfg_reg = PLL1_FRQ,
-	.masks = &pll1_masks,
-};
-
-/* pll rate configuration table, in ascending order of rates */
-struct pll_rate_tbl pll_rtbl[] = {
-	{.mode = 0, .m = 0x85, .n = 0x0C, .p = 0x1}, /* 266 MHz */
-	{.mode = 0, .m = 0xA6, .n = 0x0C, .p = 0x1}, /* 332 MHz */
-};
-
-/* PLL1 clock */
-static struct clk pll1_clk = {
-	.flags = ENABLED_ON_INIT,
-	.pclk = &osc_24m_clk,
-	.en_reg = PLL1_CTR,
-	.en_reg_bit = PLL_ENABLE,
-	.calc_rate = &pll_calc_rate,
-	.recalc = &pll_clk_recalc,
-	.set_rate = &pll_clk_set_rate,
-	.rate_config = {pll_rtbl, ARRAY_SIZE(pll_rtbl), 1},
-	.private_data = &pll1_config,
-};
-
-/* PLL3 48 MHz clock */
-static struct clk pll3_48m_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &osc_24m_clk,
-	.rate = 48000000,
-};
-
-/* watch dog timer clock */
-static struct clk wdt_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &osc_24m_clk,
-	.recalc = &follow_parent,
-};
-
-/* clock derived from pll1 clk */
-/* cpu clock */
-static struct clk cpu_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &pll1_clk,
-	.recalc = &follow_parent,
-};
-
-/* ahb masks structure */
-static struct bus_clk_masks ahb_masks = {
-	.mask = PLL_HCLK_RATIO_MASK,
-	.shift = PLL_HCLK_RATIO_SHIFT,
-};
-
-/* ahb configuration structure */
-static struct bus_clk_config ahb_config = {
-	.reg = CORE_CLK_CFG,
-	.masks = &ahb_masks,
-};
-
-/* ahb rate configuration table, in ascending order of rates */
-struct bus_rate_tbl bus_rtbl[] = {
-	{.div = 3}, /* == parent divided by 4 */
-	{.div = 2}, /* == parent divided by 3 */
-	{.div = 1}, /* == parent divided by 2 */
-	{.div = 0}, /* == parent divided by 1 */
-};
-
-/* ahb clock */
-static struct clk ahb_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &pll1_clk,
-	.calc_rate = &bus_calc_rate,
-	.recalc = &bus_clk_recalc,
-	.set_rate = &bus_clk_set_rate,
-	.rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2},
-	.private_data = &ahb_config,
-};
-
-/* auxiliary synthesizers masks */
-static struct aux_clk_masks aux_masks = {
-	.eq_sel_mask = AUX_EQ_SEL_MASK,
-	.eq_sel_shift = AUX_EQ_SEL_SHIFT,
-	.eq1_mask = AUX_EQ1_SEL,
-	.eq2_mask = AUX_EQ2_SEL,
-	.xscale_sel_mask = AUX_XSCALE_MASK,
-	.xscale_sel_shift = AUX_XSCALE_SHIFT,
-	.yscale_sel_mask = AUX_YSCALE_MASK,
-	.yscale_sel_shift = AUX_YSCALE_SHIFT,
-};
-
-/* uart synth configurations */
-static struct aux_clk_config uart_synth_config = {
-	.synth_reg = UART_CLK_SYNT,
-	.masks = &aux_masks,
-};
-
-/* aux rate configuration table, in ascending order of rates */
-struct aux_rate_tbl aux_rtbl[] = {
-	/* For PLL1 = 332 MHz */
-	{.xscale = 1, .yscale = 8, .eq = 1}, /* 41.5 MHz */
-	{.xscale = 1, .yscale = 4, .eq = 1}, /* 83 MHz */
-	{.xscale = 1, .yscale = 2, .eq = 1}, /* 166 MHz */
-};
-
-/* uart synth clock */
-static struct clk uart_synth_clk = {
-	.en_reg = UART_CLK_SYNT,
-	.en_reg_bit = AUX_SYNT_ENB,
-	.pclk = &pll1_clk,
-	.calc_rate = &aux_calc_rate,
-	.recalc = &aux_clk_recalc,
-	.set_rate = &aux_clk_set_rate,
-	.rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 1},
-	.private_data = &uart_synth_config,
-};
-
-/* uart parents */
-static struct pclk_info uart_pclk_info[] = {
-	{
-		.pclk = &uart_synth_clk,
-		.pclk_val = AUX_CLK_PLL1_VAL,
-	}, {
-		.pclk = &pll3_48m_clk,
-		.pclk_val = AUX_CLK_PLL3_VAL,
-	},
-};
-
-/* uart parent select structure */
-static struct pclk_sel uart_pclk_sel = {
-	.pclk_info = uart_pclk_info,
-	.pclk_count = ARRAY_SIZE(uart_pclk_info),
-	.pclk_sel_reg = PERIP_CLK_CFG,
-	.pclk_sel_mask = UART_CLK_MASK,
-};
-
-/* uart clock */
-static struct clk uart_clk = {
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = UART_CLK_ENB,
-	.pclk_sel = &uart_pclk_sel,
-	.pclk_sel_shift = UART_CLK_SHIFT,
-	.recalc = &follow_parent,
-};
-
-/* firda configurations */
-static struct aux_clk_config firda_synth_config = {
-	.synth_reg = FIRDA_CLK_SYNT,
-	.masks = &aux_masks,
-};
-
-/* firda synth clock */
-static struct clk firda_synth_clk = {
-	.en_reg = FIRDA_CLK_SYNT,
-	.en_reg_bit = AUX_SYNT_ENB,
-	.pclk = &pll1_clk,
-	.calc_rate = &aux_calc_rate,
-	.recalc = &aux_clk_recalc,
-	.set_rate = &aux_clk_set_rate,
-	.rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 1},
-	.private_data = &firda_synth_config,
-};
-
-/* firda parents */
-static struct pclk_info firda_pclk_info[] = {
-	{
-		.pclk = &firda_synth_clk,
-		.pclk_val = AUX_CLK_PLL1_VAL,
-	}, {
-		.pclk = &pll3_48m_clk,
-		.pclk_val = AUX_CLK_PLL3_VAL,
-	},
-};
-
-/* firda parent select structure */
-static struct pclk_sel firda_pclk_sel = {
-	.pclk_info = firda_pclk_info,
-	.pclk_count = ARRAY_SIZE(firda_pclk_info),
-	.pclk_sel_reg = PERIP_CLK_CFG,
-	.pclk_sel_mask = FIRDA_CLK_MASK,
-};
-
-/* firda clock */
-static struct clk firda_clk = {
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = FIRDA_CLK_ENB,
-	.pclk_sel = &firda_pclk_sel,
-	.pclk_sel_shift = FIRDA_CLK_SHIFT,
-	.recalc = &follow_parent,
-};
-
-/* gpt synthesizer masks */
-static struct gpt_clk_masks gpt_masks = {
-	.mscale_sel_mask = GPT_MSCALE_MASK,
-	.mscale_sel_shift = GPT_MSCALE_SHIFT,
-	.nscale_sel_mask = GPT_NSCALE_MASK,
-	.nscale_sel_shift = GPT_NSCALE_SHIFT,
-};
-
-/* gpt rate configuration table, in ascending order of rates */
-struct gpt_rate_tbl gpt_rtbl[] = {
-	/* For pll1 = 332 MHz */
-	{.mscale = 4, .nscale = 0}, /* 41.5 MHz */
-	{.mscale = 2, .nscale = 0}, /* 55.3 MHz */
-	{.mscale = 1, .nscale = 0}, /* 83 MHz */
-};
-
-/* gpt0 synth clk config*/
-static struct gpt_clk_config gpt0_synth_config = {
-	.synth_reg = PRSC1_CLK_CFG,
-	.masks = &gpt_masks,
-};
-
-/* gpt synth clock */
-static struct clk gpt0_synth_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &pll1_clk,
-	.calc_rate = &gpt_calc_rate,
-	.recalc = &gpt_clk_recalc,
-	.set_rate = &gpt_clk_set_rate,
-	.rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
-	.private_data = &gpt0_synth_config,
-};
-
-/* gpt parents */
-static struct pclk_info gpt0_pclk_info[] = {
-	{
-		.pclk = &gpt0_synth_clk,
-		.pclk_val = AUX_CLK_PLL1_VAL,
-	}, {
-		.pclk = &pll3_48m_clk,
-		.pclk_val = AUX_CLK_PLL3_VAL,
-	},
-};
-
-/* gpt parent select structure */
-static struct pclk_sel gpt0_pclk_sel = {
-	.pclk_info = gpt0_pclk_info,
-	.pclk_count = ARRAY_SIZE(gpt0_pclk_info),
-	.pclk_sel_reg = PERIP_CLK_CFG,
-	.pclk_sel_mask = GPT_CLK_MASK,
-};
-
-/* gpt0 timer clock */
-static struct clk gpt0_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk_sel = &gpt0_pclk_sel,
-	.pclk_sel_shift = GPT0_CLK_SHIFT,
-	.recalc = &follow_parent,
-};
-
-/* gpt1 synth clk configurations */
-static struct gpt_clk_config gpt1_synth_config = {
-	.synth_reg = PRSC2_CLK_CFG,
-	.masks = &gpt_masks,
-};
-
-/* gpt1 synth clock */
-static struct clk gpt1_synth_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &pll1_clk,
-	.calc_rate = &gpt_calc_rate,
-	.recalc = &gpt_clk_recalc,
-	.set_rate = &gpt_clk_set_rate,
-	.rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
-	.private_data = &gpt1_synth_config,
-};
-
-static struct pclk_info gpt1_pclk_info[] = {
-	{
-		.pclk = &gpt1_synth_clk,
-		.pclk_val = AUX_CLK_PLL1_VAL,
-	}, {
-		.pclk = &pll3_48m_clk,
-		.pclk_val = AUX_CLK_PLL3_VAL,
-	},
-};
-
-/* gpt parent select structure */
-static struct pclk_sel gpt1_pclk_sel = {
-	.pclk_info = gpt1_pclk_info,
-	.pclk_count = ARRAY_SIZE(gpt1_pclk_info),
-	.pclk_sel_reg = PERIP_CLK_CFG,
-	.pclk_sel_mask = GPT_CLK_MASK,
-};
-
-/* gpt1 timer clock */
-static struct clk gpt1_clk = {
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = GPT1_CLK_ENB,
-	.pclk_sel = &gpt1_pclk_sel,
-	.pclk_sel_shift = GPT1_CLK_SHIFT,
-	.recalc = &follow_parent,
-};
-
-/* gpt2 synth clk configurations */
-static struct gpt_clk_config gpt2_synth_config = {
-	.synth_reg = PRSC3_CLK_CFG,
-	.masks = &gpt_masks,
-};
-
-/* gpt1 synth clock */
-static struct clk gpt2_synth_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &pll1_clk,
-	.calc_rate = &gpt_calc_rate,
-	.recalc = &gpt_clk_recalc,
-	.set_rate = &gpt_clk_set_rate,
-	.rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
-	.private_data = &gpt2_synth_config,
-};
-
-static struct pclk_info gpt2_pclk_info[] = {
-	{
-		.pclk = &gpt2_synth_clk,
-		.pclk_val = AUX_CLK_PLL1_VAL,
-	}, {
-		.pclk = &pll3_48m_clk,
-		.pclk_val = AUX_CLK_PLL3_VAL,
-	},
-};
-
-/* gpt parent select structure */
-static struct pclk_sel gpt2_pclk_sel = {
-	.pclk_info = gpt2_pclk_info,
-	.pclk_count = ARRAY_SIZE(gpt2_pclk_info),
-	.pclk_sel_reg = PERIP_CLK_CFG,
-	.pclk_sel_mask = GPT_CLK_MASK,
-};
-
-/* gpt2 timer clock */
-static struct clk gpt2_clk = {
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = GPT2_CLK_ENB,
-	.pclk_sel = &gpt2_pclk_sel,
-	.pclk_sel_shift = GPT2_CLK_SHIFT,
-	.recalc = &follow_parent,
-};
-
-/* clock derived from pll3 clk */
-/* usbh clock */
-static struct clk usbh_clk = {
-	.pclk = &pll3_48m_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = USBH_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* usbd clock */
-static struct clk usbd_clk = {
-	.pclk = &pll3_48m_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = USBD_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* clock derived from ahb clk */
-/* apb masks structure */
-static struct bus_clk_masks apb_masks = {
-	.mask = HCLK_PCLK_RATIO_MASK,
-	.shift = HCLK_PCLK_RATIO_SHIFT,
-};
-
-/* apb configuration structure */
-static struct bus_clk_config apb_config = {
-	.reg = CORE_CLK_CFG,
-	.masks = &apb_masks,
-};
-
-/* apb clock */
-static struct clk apb_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &ahb_clk,
-	.calc_rate = &bus_calc_rate,
-	.recalc = &bus_clk_recalc,
-	.set_rate = &bus_clk_set_rate,
-	.rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2},
-	.private_data = &apb_config,
-};
-
-/* i2c clock */
-static struct clk i2c_clk = {
-	.pclk = &ahb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = I2C_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* dma clock */
-static struct clk dma_clk = {
-	.pclk = &ahb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = DMA_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* jpeg clock */
-static struct clk jpeg_clk = {
-	.pclk = &ahb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = JPEG_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* gmac clock */
-static struct clk gmac_clk = {
-	.pclk = &ahb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = GMAC_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* smi clock */
-static struct clk smi_clk = {
-	.pclk = &ahb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = SMI_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* c3 clock */
-static struct clk c3_clk = {
-	.pclk = &ahb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = C3_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* clock derived from apb clk */
-/* adc clock */
-static struct clk adc_clk = {
-	.pclk = &apb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = ADC_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
-/* emi clock */
-static struct clk emi_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &ahb_clk,
-	.recalc = &follow_parent,
-};
-#endif
-
-/* ssp clock */
-static struct clk ssp0_clk = {
-	.pclk = &apb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = SSP_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* gpio clock */
-static struct clk gpio_clk = {
-	.pclk = &apb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = GPIO_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-static struct clk dummy_apb_pclk;
-
-#if defined(CONFIG_MACH_SPEAR300) || defined(CONFIG_MACH_SPEAR310) || \
-	defined(CONFIG_MACH_SPEAR320)
-/* fsmc clock */
-static struct clk fsmc_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &ahb_clk,
-	.recalc = &follow_parent,
-};
-#endif
-
-/* common clocks to spear310 and spear320 */
-#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
-/* uart1 clock */
-static struct clk uart1_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &apb_clk,
-	.recalc = &follow_parent,
-};
-
-/* uart2 clock */
-static struct clk uart2_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &apb_clk,
-	.recalc = &follow_parent,
-};
-#endif /* CONFIG_MACH_SPEAR310 || CONFIG_MACH_SPEAR320 */
-
-/* common clocks to spear300 and spear320 */
-#if defined(CONFIG_MACH_SPEAR300) || defined(CONFIG_MACH_SPEAR320)
-/* clcd clock */
-static struct clk clcd_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &pll3_48m_clk,
-	.recalc = &follow_parent,
-};
-
-/* sdhci clock */
-static struct clk sdhci_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &ahb_clk,
-	.recalc = &follow_parent,
-};
-#endif /* CONFIG_MACH_SPEAR300 || CONFIG_MACH_SPEAR320 */
-
-/* spear300 machine specific clock structures */
-#ifdef CONFIG_MACH_SPEAR300
-/* gpio1 clock */
-static struct clk gpio1_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &apb_clk,
-	.recalc = &follow_parent,
-};
-
-/* keyboard clock */
-static struct clk kbd_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &apb_clk,
-	.recalc = &follow_parent,
-};
-
-#endif
-
-/* spear310 machine specific clock structures */
-#ifdef CONFIG_MACH_SPEAR310
-/* uart3 clock */
-static struct clk uart3_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &apb_clk,
-	.recalc = &follow_parent,
-};
-
-/* uart4 clock */
-static struct clk uart4_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &apb_clk,
-	.recalc = &follow_parent,
-};
-
-/* uart5 clock */
-static struct clk uart5_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &apb_clk,
-	.recalc = &follow_parent,
-};
-#endif
-
-/* spear320 machine specific clock structures */
-#ifdef CONFIG_MACH_SPEAR320
-/* can0 clock */
-static struct clk can0_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &apb_clk,
-	.recalc = &follow_parent,
-};
-
-/* can1 clock */
-static struct clk can1_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &apb_clk,
-	.recalc = &follow_parent,
-};
-
-/* i2c1 clock */
-static struct clk i2c1_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &ahb_clk,
-	.recalc = &follow_parent,
-};
-
-/* ssp1 clock */
-static struct clk ssp1_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &apb_clk,
-	.recalc = &follow_parent,
-};
-
-/* ssp2 clock */
-static struct clk ssp2_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &apb_clk,
-	.recalc = &follow_parent,
-};
-
-/* pwm clock */
-static struct clk pwm_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &apb_clk,
-	.recalc = &follow_parent,
-};
-#endif
-
-/* array of all spear 3xx clock lookups */
-static struct clk_lookup spear_clk_lookups[] = {
-	{ .con_id = "apb_pclk",		.clk = &dummy_apb_pclk},
-	/* root clks */
-	{ .con_id = "osc_32k_clk",	.clk = &osc_32k_clk},
-	{ .con_id = "osc_24m_clk",	.clk = &osc_24m_clk},
-	/* clock derived from 32 KHz osc clk */
-	{ .dev_id = "rtc-spear",	.clk = &rtc_clk},
-	/* clock derived from 24 MHz osc clk */
-	{ .con_id = "pll1_clk",		.clk = &pll1_clk},
-	{ .con_id = "pll3_48m_clk",	.clk = &pll3_48m_clk},
-	{ .dev_id = "wdt",		.clk = &wdt_clk},
-	/* clock derived from pll1 clk */
-	{ .con_id = "cpu_clk",		.clk = &cpu_clk},
-	{ .con_id = "ahb_clk",		.clk = &ahb_clk},
-	{ .con_id = "uart_synth_clk",	.clk = &uart_synth_clk},
-	{ .con_id = "firda_synth_clk",	.clk = &firda_synth_clk},
-	{ .con_id = "gpt0_synth_clk",	.clk = &gpt0_synth_clk},
-	{ .con_id = "gpt1_synth_clk",	.clk = &gpt1_synth_clk},
-	{ .con_id = "gpt2_synth_clk",	.clk = &gpt2_synth_clk},
-	{ .dev_id = "uart",		.clk = &uart_clk},
-	{ .dev_id = "firda",		.clk = &firda_clk},
-	{ .dev_id = "gpt0",		.clk = &gpt0_clk},
-	{ .dev_id = "gpt1",		.clk = &gpt1_clk},
-	{ .dev_id = "gpt2",		.clk = &gpt2_clk},
-	/* clock derived from pll3 clk */
-	{ .dev_id = "designware_udc",   .clk = &usbd_clk},
-	{ .con_id = "usbh_clk",		.clk = &usbh_clk},
-	/* clock derived from ahb clk */
-	{ .con_id = "apb_clk",		.clk = &apb_clk},
-	{ .dev_id = "i2c_designware.0",	.clk = &i2c_clk},
-	{ .dev_id = "dma",		.clk = &dma_clk},
-	{ .dev_id = "jpeg",		.clk = &jpeg_clk},
-	{ .dev_id = "gmac",		.clk = &gmac_clk},
-	{ .dev_id = "smi",		.clk = &smi_clk},
-	{ .dev_id = "c3",		.clk = &c3_clk},
-	/* clock derived from apb clk */
-	{ .dev_id = "adc",		.clk = &adc_clk},
-	{ .dev_id = "ssp-pl022.0",	.clk = &ssp0_clk},
-	{ .dev_id = "gpio",		.clk = &gpio_clk},
-};
-
-/* array of all spear 300 clock lookups */
-#ifdef CONFIG_MACH_SPEAR300
-static struct clk_lookup spear300_clk_lookups[] = {
-	{ .dev_id = "clcd",		.clk = &clcd_clk},
-	{ .con_id = "fsmc",		.clk = &fsmc_clk},
-	{ .dev_id = "gpio1",		.clk = &gpio1_clk},
-	{ .dev_id = "keyboard",		.clk = &kbd_clk},
-	{ .dev_id = "sdhci",		.clk = &sdhci_clk},
-};
-#endif
-
-/* array of all spear 310 clock lookups */
-#ifdef CONFIG_MACH_SPEAR310
-static struct clk_lookup spear310_clk_lookups[] = {
-	{ .con_id = "fsmc",		.clk = &fsmc_clk},
-	{ .con_id = "emi",		.clk = &emi_clk},
-	{ .dev_id = "uart1",		.clk = &uart1_clk},
-	{ .dev_id = "uart2",		.clk = &uart2_clk},
-	{ .dev_id = "uart3",		.clk = &uart3_clk},
-	{ .dev_id = "uart4",		.clk = &uart4_clk},
-	{ .dev_id = "uart5",		.clk = &uart5_clk},
-};
-#endif
-
-/* array of all spear 320 clock lookups */
-#ifdef CONFIG_MACH_SPEAR320
-static struct clk_lookup spear320_clk_lookups[] = {
-	{ .dev_id = "clcd",		.clk = &clcd_clk},
-	{ .con_id = "fsmc",		.clk = &fsmc_clk},
-	{ .dev_id = "i2c_designware.1",	.clk = &i2c1_clk},
-	{ .con_id = "emi",		.clk = &emi_clk},
-	{ .dev_id = "pwm",		.clk = &pwm_clk},
-	{ .dev_id = "sdhci",		.clk = &sdhci_clk},
-	{ .dev_id = "c_can_platform.0",	.clk = &can0_clk},
-	{ .dev_id = "c_can_platform.1",	.clk = &can1_clk},
-	{ .dev_id = "ssp-pl022.1",	.clk = &ssp1_clk},
-	{ .dev_id = "ssp-pl022.2",	.clk = &ssp2_clk},
-	{ .dev_id = "uart1",		.clk = &uart1_clk},
-	{ .dev_id = "uart2",		.clk = &uart2_clk},
-};
-#endif
-
-void __init spear3xx_clk_init(void)
-{
-	int i, cnt;
-	struct clk_lookup *lookups;
-
-	if (machine_is_spear300()) {
-		cnt = ARRAY_SIZE(spear300_clk_lookups);
-		lookups = spear300_clk_lookups;
-	} else if (machine_is_spear310()) {
-		cnt = ARRAY_SIZE(spear310_clk_lookups);
-		lookups = spear310_clk_lookups;
-	} else {
-		cnt = ARRAY_SIZE(spear320_clk_lookups);
-		lookups = spear320_clk_lookups;
-	}
-
-	for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++)
-		clk_register(&spear_clk_lookups[i]);
-
-	for (i = 0; i < cnt; i++)
-		clk_register(&lookups[i]);
-
-	clk_init();
-}
diff --git a/arch/arm/mach-spear3xx/include/mach/generic.h b/arch/arm/mach-spear3xx/include/mach/generic.h
index 14276e5a98d2..4a95b9453c2a 100644
--- a/arch/arm/mach-spear3xx/include/mach/generic.h
+++ b/arch/arm/mach-spear3xx/include/mach/generic.h
@@ -14,189 +14,24 @@
 #ifndef __MACH_GENERIC_H
 #define __MACH_GENERIC_H
 
+#include <linux/amba/pl08x.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/amba/bus.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
-#include <plat/padmux.h>
-
-/* spear3xx declarations */
-/*
- * Each GPT has 2 timer channels
- * Following GPT channels will be used as clock source and clockevent
- */
-#define SPEAR_GPT0_BASE		SPEAR3XX_ML1_TMR_BASE
-#define SPEAR_GPT0_CHAN0_IRQ	SPEAR3XX_IRQ_CPU_GPT1_1
-#define SPEAR_GPT0_CHAN1_IRQ	SPEAR3XX_IRQ_CPU_GPT1_2
 
 /* Add spear3xx family device structure declarations here */
-extern struct amba_device spear3xx_gpio_device;
-extern struct amba_device spear3xx_uart_device;
 extern struct sys_timer spear3xx_timer;
+extern struct pl022_ssp_controller pl022_plat_data;
+extern struct pl08x_platform_data pl080_plat_data;
 
 /* Add spear3xx family function declarations here */
+void __init spear_setup_of_timer(void);
 void __init spear3xx_clk_init(void);
-void __init spear_setup_timer(void);
 void __init spear3xx_map_io(void);
-void __init spear3xx_init_irq(void);
-void __init spear3xx_init(void);
+void __init spear3xx_dt_init_irq(void);
 
 void spear_restart(char, const char *);
 
-/* pad mux declarations */
-#define PMX_FIRDA_MASK		(1 << 14)
-#define PMX_I2C_MASK		(1 << 13)
-#define PMX_SSP_CS_MASK		(1 << 12)
-#define PMX_SSP_MASK		(1 << 11)
-#define PMX_MII_MASK		(1 << 10)
-#define PMX_GPIO_PIN0_MASK	(1 << 9)
-#define PMX_GPIO_PIN1_MASK	(1 << 8)
-#define PMX_GPIO_PIN2_MASK	(1 << 7)
-#define PMX_GPIO_PIN3_MASK	(1 << 6)
-#define PMX_GPIO_PIN4_MASK	(1 << 5)
-#define PMX_GPIO_PIN5_MASK	(1 << 4)
-#define PMX_UART0_MODEM_MASK	(1 << 3)
-#define PMX_UART0_MASK		(1 << 2)
-#define PMX_TIMER_3_4_MASK	(1 << 1)
-#define PMX_TIMER_1_2_MASK	(1 << 0)
-
-/* pad mux devices */
-extern struct pmx_dev spear3xx_pmx_firda;
-extern struct pmx_dev spear3xx_pmx_i2c;
-extern struct pmx_dev spear3xx_pmx_ssp_cs;
-extern struct pmx_dev spear3xx_pmx_ssp;
-extern struct pmx_dev spear3xx_pmx_mii;
-extern struct pmx_dev spear3xx_pmx_gpio_pin0;
-extern struct pmx_dev spear3xx_pmx_gpio_pin1;
-extern struct pmx_dev spear3xx_pmx_gpio_pin2;
-extern struct pmx_dev spear3xx_pmx_gpio_pin3;
-extern struct pmx_dev spear3xx_pmx_gpio_pin4;
-extern struct pmx_dev spear3xx_pmx_gpio_pin5;
-extern struct pmx_dev spear3xx_pmx_uart0_modem;
-extern struct pmx_dev spear3xx_pmx_uart0;
-extern struct pmx_dev spear3xx_pmx_timer_3_4;
-extern struct pmx_dev spear3xx_pmx_timer_1_2;
-
-#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
-/* padmux plgpio devices */
-extern struct pmx_dev spear3xx_pmx_plgpio_0_1;
-extern struct pmx_dev spear3xx_pmx_plgpio_2_3;
-extern struct pmx_dev spear3xx_pmx_plgpio_4_5;
-extern struct pmx_dev spear3xx_pmx_plgpio_6_9;
-extern struct pmx_dev spear3xx_pmx_plgpio_10_27;
-extern struct pmx_dev spear3xx_pmx_plgpio_28;
-extern struct pmx_dev spear3xx_pmx_plgpio_29;
-extern struct pmx_dev spear3xx_pmx_plgpio_30;
-extern struct pmx_dev spear3xx_pmx_plgpio_31;
-extern struct pmx_dev spear3xx_pmx_plgpio_32;
-extern struct pmx_dev spear3xx_pmx_plgpio_33;
-extern struct pmx_dev spear3xx_pmx_plgpio_34_36;
-extern struct pmx_dev spear3xx_pmx_plgpio_37_42;
-extern struct pmx_dev spear3xx_pmx_plgpio_43_44_47_48;
-extern struct pmx_dev spear3xx_pmx_plgpio_45_46_49_50;
-#endif
-
-/* spear300 declarations */
-#ifdef CONFIG_MACH_SPEAR300
-/* Add spear300 machine device structure declarations here */
-extern struct amba_device spear300_gpio1_device;
-
-/* pad mux modes */
-extern struct pmx_mode spear300_nand_mode;
-extern struct pmx_mode spear300_nor_mode;
-extern struct pmx_mode spear300_photo_frame_mode;
-extern struct pmx_mode spear300_lend_ip_phone_mode;
-extern struct pmx_mode spear300_hend_ip_phone_mode;
-extern struct pmx_mode spear300_lend_wifi_phone_mode;
-extern struct pmx_mode spear300_hend_wifi_phone_mode;
-extern struct pmx_mode spear300_ata_pabx_wi2s_mode;
-extern struct pmx_mode spear300_ata_pabx_i2s_mode;
-extern struct pmx_mode spear300_caml_lcdw_mode;
-extern struct pmx_mode spear300_camu_lcd_mode;
-extern struct pmx_mode spear300_camu_wlcd_mode;
-extern struct pmx_mode spear300_caml_lcd_mode;
-
-/* pad mux devices */
-extern struct pmx_dev spear300_pmx_fsmc_2_chips;
-extern struct pmx_dev spear300_pmx_fsmc_4_chips;
-extern struct pmx_dev spear300_pmx_keyboard;
-extern struct pmx_dev spear300_pmx_clcd;
-extern struct pmx_dev spear300_pmx_telecom_gpio;
-extern struct pmx_dev spear300_pmx_telecom_tdm;
-extern struct pmx_dev spear300_pmx_telecom_spi_cs_i2c_clk;
-extern struct pmx_dev spear300_pmx_telecom_camera;
-extern struct pmx_dev spear300_pmx_telecom_dac;
-extern struct pmx_dev spear300_pmx_telecom_i2s;
-extern struct pmx_dev spear300_pmx_telecom_boot_pins;
-extern struct pmx_dev spear300_pmx_telecom_sdhci_4bit;
-extern struct pmx_dev spear300_pmx_telecom_sdhci_8bit;
-extern struct pmx_dev spear300_pmx_gpio1;
-
-/* Add spear300 machine function declarations here */
-void __init spear300_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
-		u8 pmx_dev_count);
-
-#endif /* CONFIG_MACH_SPEAR300 */
-
-/* spear310 declarations */
-#ifdef CONFIG_MACH_SPEAR310
-/* Add spear310 machine device structure declarations here */
-
-/* pad mux devices */
-extern struct pmx_dev spear310_pmx_emi_cs_0_1_4_5;
-extern struct pmx_dev spear310_pmx_emi_cs_2_3;
-extern struct pmx_dev spear310_pmx_uart1;
-extern struct pmx_dev spear310_pmx_uart2;
-extern struct pmx_dev spear310_pmx_uart3_4_5;
-extern struct pmx_dev spear310_pmx_fsmc;
-extern struct pmx_dev spear310_pmx_rs485_0_1;
-extern struct pmx_dev spear310_pmx_tdm0;
-
-/* Add spear310 machine function declarations here */
-void __init spear310_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
-		u8 pmx_dev_count);
-
-#endif /* CONFIG_MACH_SPEAR310 */
-
-/* spear320 declarations */
-#ifdef CONFIG_MACH_SPEAR320
-/* Add spear320 machine device structure declarations here */
-
-/* pad mux modes */
-extern struct pmx_mode spear320_auto_net_smii_mode;
-extern struct pmx_mode spear320_auto_net_mii_mode;
-extern struct pmx_mode spear320_auto_exp_mode;
-extern struct pmx_mode spear320_small_printers_mode;
-
-/* pad mux devices */
-extern struct pmx_dev spear320_pmx_clcd;
-extern struct pmx_dev spear320_pmx_emi;
-extern struct pmx_dev spear320_pmx_fsmc;
-extern struct pmx_dev spear320_pmx_spp;
-extern struct pmx_dev spear320_pmx_sdhci;
-extern struct pmx_dev spear320_pmx_i2s;
-extern struct pmx_dev spear320_pmx_uart1;
-extern struct pmx_dev spear320_pmx_uart1_modem;
-extern struct pmx_dev spear320_pmx_uart2;
-extern struct pmx_dev spear320_pmx_touchscreen;
-extern struct pmx_dev spear320_pmx_can;
-extern struct pmx_dev spear320_pmx_sdhci_led;
-extern struct pmx_dev spear320_pmx_pwm0;
-extern struct pmx_dev spear320_pmx_pwm1;
-extern struct pmx_dev spear320_pmx_pwm2;
-extern struct pmx_dev spear320_pmx_pwm3;
-extern struct pmx_dev spear320_pmx_ssp1;
-extern struct pmx_dev spear320_pmx_ssp2;
-extern struct pmx_dev spear320_pmx_mii1;
-extern struct pmx_dev spear320_pmx_smii0;
-extern struct pmx_dev spear320_pmx_smii1;
-extern struct pmx_dev spear320_pmx_i2c1;
-
-/* Add spear320 machine function declarations here */
-void __init spear320_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
-		u8 pmx_dev_count);
-
-#endif /* CONFIG_MACH_SPEAR320 */
-
 #endif /* __MACH_GENERIC_H */
diff --git a/arch/arm/mach-spear3xx/include/mach/hardware.h b/arch/arm/mach-spear3xx/include/mach/hardware.h
index 4660c0d8ec0d..40a8c178f10d 100644
--- a/arch/arm/mach-spear3xx/include/mach/hardware.h
+++ b/arch/arm/mach-spear3xx/include/mach/hardware.h
@@ -1,23 +1 @@
-/*
- * arch/arm/mach-spear3xx/include/mach/hardware.h
- *
- * Hardware definitions for SPEAr3xx machine family
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_HARDWARE_H
-#define __MACH_HARDWARE_H
-
-#include <plat/hardware.h>
-#include <mach/spear.h>
-
-/* Vitual to physical translation of statically mapped space */
-#define IO_ADDRESS(x)		(x | 0xF0000000)
-
-#endif /* __MACH_HARDWARE_H */
+/* empty */
diff --git a/arch/arm/mach-spear3xx/include/mach/irqs.h b/arch/arm/mach-spear3xx/include/mach/irqs.h
index 6e265442808e..51bd62a0254c 100644
--- a/arch/arm/mach-spear3xx/include/mach/irqs.h
+++ b/arch/arm/mach-spear3xx/include/mach/irqs.h
@@ -14,141 +14,14 @@
 #ifndef __MACH_IRQS_H
 #define __MACH_IRQS_H
 
-/* SPEAr3xx IRQ definitions */
-#define SPEAR3XX_IRQ_HW_ACCEL_MOD_0		0
+/* FIXME: probe all these from DT */
 #define SPEAR3XX_IRQ_INTRCOMM_RAS_ARM		1
-#define SPEAR3XX_IRQ_CPU_GPT1_1			2
-#define SPEAR3XX_IRQ_CPU_GPT1_2			3
-#define SPEAR3XX_IRQ_BASIC_GPT1_1		4
-#define SPEAR3XX_IRQ_BASIC_GPT1_2		5
-#define SPEAR3XX_IRQ_BASIC_GPT2_1		6
-#define SPEAR3XX_IRQ_BASIC_GPT2_2		7
-#define SPEAR3XX_IRQ_BASIC_DMA			8
-#define SPEAR3XX_IRQ_BASIC_SMI			9
-#define SPEAR3XX_IRQ_BASIC_RTC			10
-#define SPEAR3XX_IRQ_BASIC_GPIO			11
-#define SPEAR3XX_IRQ_BASIC_WDT			12
-#define SPEAR3XX_IRQ_DDR_CONTROLLER		13
-#define SPEAR3XX_IRQ_SYS_ERROR			14
-#define SPEAR3XX_IRQ_WAKEUP_RCV			15
-#define SPEAR3XX_IRQ_JPEG			16
-#define SPEAR3XX_IRQ_IRDA			17
-#define SPEAR3XX_IRQ_ADC			18
-#define SPEAR3XX_IRQ_UART			19
-#define SPEAR3XX_IRQ_SSP			20
-#define SPEAR3XX_IRQ_I2C			21
-#define SPEAR3XX_IRQ_MAC_1			22
-#define SPEAR3XX_IRQ_MAC_2			23
-#define SPEAR3XX_IRQ_USB_DEV			24
-#define SPEAR3XX_IRQ_USB_H_OHCI_0		25
-#define SPEAR3XX_IRQ_USB_H_EHCI_0		26
-#define SPEAR3XX_IRQ_USB_H_EHCI_1		SPEAR3XX_IRQ_USB_H_EHCI_0
-#define SPEAR3XX_IRQ_USB_H_OHCI_1		27
 #define SPEAR3XX_IRQ_GEN_RAS_1			28
 #define SPEAR3XX_IRQ_GEN_RAS_2			29
 #define SPEAR3XX_IRQ_GEN_RAS_3			30
-#define SPEAR3XX_IRQ_HW_ACCEL_MOD_1		31
 #define SPEAR3XX_IRQ_VIC_END			32
-
 #define SPEAR3XX_VIRQ_START			SPEAR3XX_IRQ_VIC_END
 
-/* SPEAr300 Virtual irq definitions */
-/* IRQs sharing IRQ_GEN_RAS_1 */
-#define SPEAR300_VIRQ_IT_PERS_S			(SPEAR3XX_VIRQ_START + 0)
-#define SPEAR300_VIRQ_IT_CHANGE_S		(SPEAR3XX_VIRQ_START + 1)
-#define SPEAR300_VIRQ_I2S			(SPEAR3XX_VIRQ_START + 2)
-#define SPEAR300_VIRQ_TDM			(SPEAR3XX_VIRQ_START + 3)
-#define SPEAR300_VIRQ_CAMERA_L			(SPEAR3XX_VIRQ_START + 4)
-#define SPEAR300_VIRQ_CAMERA_F			(SPEAR3XX_VIRQ_START + 5)
-#define SPEAR300_VIRQ_CAMERA_V			(SPEAR3XX_VIRQ_START + 6)
-#define SPEAR300_VIRQ_KEYBOARD			(SPEAR3XX_VIRQ_START + 7)
-#define SPEAR300_VIRQ_GPIO1			(SPEAR3XX_VIRQ_START + 8)
-
-/* IRQs sharing IRQ_GEN_RAS_3 */
-#define SPEAR300_IRQ_CLCD			SPEAR3XX_IRQ_GEN_RAS_3
-
-/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
-#define SPEAR300_IRQ_SDHCI			SPEAR3XX_IRQ_INTRCOMM_RAS_ARM
-
-/* SPEAr310 Virtual irq definitions */
-/* IRQs sharing IRQ_GEN_RAS_1 */
-#define SPEAR310_VIRQ_SMII0			(SPEAR3XX_VIRQ_START + 0)
-#define SPEAR310_VIRQ_SMII1			(SPEAR3XX_VIRQ_START + 1)
-#define SPEAR310_VIRQ_SMII2			(SPEAR3XX_VIRQ_START + 2)
-#define SPEAR310_VIRQ_SMII3			(SPEAR3XX_VIRQ_START + 3)
-#define SPEAR310_VIRQ_WAKEUP_SMII0		(SPEAR3XX_VIRQ_START + 4)
-#define SPEAR310_VIRQ_WAKEUP_SMII1		(SPEAR3XX_VIRQ_START + 5)
-#define SPEAR310_VIRQ_WAKEUP_SMII2		(SPEAR3XX_VIRQ_START + 6)
-#define SPEAR310_VIRQ_WAKEUP_SMII3		(SPEAR3XX_VIRQ_START + 7)
-
-/* IRQs sharing IRQ_GEN_RAS_2 */
-#define SPEAR310_VIRQ_UART1			(SPEAR3XX_VIRQ_START + 8)
-#define SPEAR310_VIRQ_UART2			(SPEAR3XX_VIRQ_START + 9)
-#define SPEAR310_VIRQ_UART3			(SPEAR3XX_VIRQ_START + 10)
-#define SPEAR310_VIRQ_UART4			(SPEAR3XX_VIRQ_START + 11)
-#define SPEAR310_VIRQ_UART5			(SPEAR3XX_VIRQ_START + 12)
-
-/* IRQs sharing IRQ_GEN_RAS_3 */
-#define SPEAR310_VIRQ_EMI			(SPEAR3XX_VIRQ_START + 13)
-#define SPEAR310_VIRQ_PLGPIO			(SPEAR3XX_VIRQ_START + 14)
-
-/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
-#define SPEAR310_VIRQ_TDM_HDLC			(SPEAR3XX_VIRQ_START + 15)
-#define SPEAR310_VIRQ_RS485_0			(SPEAR3XX_VIRQ_START + 16)
-#define SPEAR310_VIRQ_RS485_1			(SPEAR3XX_VIRQ_START + 17)
-
-/* SPEAr320 Virtual irq definitions */
-/* IRQs sharing IRQ_GEN_RAS_1 */
-#define SPEAR320_VIRQ_EMI			(SPEAR3XX_VIRQ_START + 0)
-#define SPEAR320_VIRQ_CLCD			(SPEAR3XX_VIRQ_START + 1)
-#define SPEAR320_VIRQ_SPP			(SPEAR3XX_VIRQ_START + 2)
-
-/* IRQs sharing IRQ_GEN_RAS_2 */
-#define SPEAR320_IRQ_SDHCI			SPEAR3XX_IRQ_GEN_RAS_2
-
-/* IRQs sharing IRQ_GEN_RAS_3 */
-#define SPEAR320_VIRQ_PLGPIO			(SPEAR3XX_VIRQ_START + 3)
-#define SPEAR320_VIRQ_I2S_PLAY			(SPEAR3XX_VIRQ_START + 4)
-#define SPEAR320_VIRQ_I2S_REC			(SPEAR3XX_VIRQ_START + 5)
-
-/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
-#define SPEAR320_VIRQ_CANU			(SPEAR3XX_VIRQ_START + 6)
-#define SPEAR320_VIRQ_CANL			(SPEAR3XX_VIRQ_START + 7)
-#define SPEAR320_VIRQ_UART1			(SPEAR3XX_VIRQ_START + 8)
-#define SPEAR320_VIRQ_UART2			(SPEAR3XX_VIRQ_START + 9)
-#define SPEAR320_VIRQ_SSP1			(SPEAR3XX_VIRQ_START + 10)
-#define SPEAR320_VIRQ_SSP2			(SPEAR3XX_VIRQ_START + 11)
-#define SPEAR320_VIRQ_SMII0			(SPEAR3XX_VIRQ_START + 12)
-#define SPEAR320_VIRQ_MII1_SMII1		(SPEAR3XX_VIRQ_START + 13)
-#define SPEAR320_VIRQ_WAKEUP_SMII0		(SPEAR3XX_VIRQ_START + 14)
-#define SPEAR320_VIRQ_WAKEUP_MII1_SMII1		(SPEAR3XX_VIRQ_START + 15)
-#define SPEAR320_VIRQ_I2C1			(SPEAR3XX_VIRQ_START + 16)
-
-/*
- * GPIO pins virtual irqs
- * Use the lowest number for the GPIO virtual IRQs base on which subarchs
- * we have compiled in
- */
-#if defined(CONFIG_MACH_SPEAR310)
-#define SPEAR3XX_GPIO_INT_BASE			(SPEAR3XX_VIRQ_START + 18)
-#elif defined(CONFIG_MACH_SPEAR320)
-#define SPEAR3XX_GPIO_INT_BASE			(SPEAR3XX_VIRQ_START + 17)
-#else
-#define SPEAR3XX_GPIO_INT_BASE			(SPEAR3XX_VIRQ_START + 9)
-#endif
-
-#define SPEAR300_GPIO1_INT_BASE			(SPEAR3XX_GPIO_INT_BASE + 8)
-#define SPEAR3XX_PLGPIO_COUNT	102
-
-#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
-#define SPEAR3XX_PLGPIO_INT_BASE		(SPEAR3XX_GPIO_INT_BASE + 8)
-#define SPEAR3XX_GPIO_INT_END			(SPEAR3XX_PLGPIO_INT_BASE + \
-							SPEAR3XX_PLGPIO_COUNT)
-#else
-#define SPEAR3XX_GPIO_INT_END	(SPEAR300_GPIO1_INT_BASE + 8)
-#endif
-
-#define SPEAR3XX_VIRQ_END	SPEAR3XX_GPIO_INT_END
-#define NR_IRQS			SPEAR3XX_VIRQ_END
+#define NR_IRQS			160
 
 #endif /* __MACH_IRQS_H */
diff --git a/arch/arm/mach-spear3xx/include/mach/misc_regs.h b/arch/arm/mach-spear3xx/include/mach/misc_regs.h
index 5bd8cd8d4852..18e2ac576f25 100644
--- a/arch/arm/mach-spear3xx/include/mach/misc_regs.h
+++ b/arch/arm/mach-spear3xx/include/mach/misc_regs.h
@@ -14,151 +14,9 @@
 #ifndef __MACH_MISC_REGS_H
 #define __MACH_MISC_REGS_H
 
-#include <mach/hardware.h>
+#include <mach/spear.h>
 
 #define MISC_BASE		IOMEM(VA_SPEAR3XX_ICM3_MISC_REG_BASE)
-
-#define SOC_CFG_CTR		(MISC_BASE + 0x000)
-#define DIAG_CFG_CTR		(MISC_BASE + 0x004)
-#define PLL1_CTR		(MISC_BASE + 0x008)
-#define PLL1_FRQ		(MISC_BASE + 0x00C)
-#define PLL1_MOD		(MISC_BASE + 0x010)
-#define PLL2_CTR		(MISC_BASE + 0x014)
-/* PLL_CTR register masks */
-#define PLL_ENABLE		2
-#define PLL_MODE_SHIFT		4
-#define PLL_MODE_MASK		0x3
-#define PLL_MODE_NORMAL		0
-#define PLL_MODE_FRACTION	1
-#define PLL_MODE_DITH_DSB	2
-#define PLL_MODE_DITH_SSB	3
-
-#define PLL2_FRQ		(MISC_BASE + 0x018)
-/* PLL FRQ register masks */
-#define PLL_DIV_N_SHIFT		0
-#define PLL_DIV_N_MASK		0xFF
-#define PLL_DIV_P_SHIFT		8
-#define PLL_DIV_P_MASK		0x7
-#define PLL_NORM_FDBK_M_SHIFT	24
-#define PLL_NORM_FDBK_M_MASK	0xFF
-#define PLL_DITH_FDBK_M_SHIFT	16
-#define PLL_DITH_FDBK_M_MASK	0xFFFF
-
-#define PLL2_MOD		(MISC_BASE + 0x01C)
-#define PLL_CLK_CFG		(MISC_BASE + 0x020)
-#define CORE_CLK_CFG		(MISC_BASE + 0x024)
-/* CORE CLK CFG register masks */
-#define PLL_HCLK_RATIO_SHIFT	10
-#define PLL_HCLK_RATIO_MASK	0x3
-#define HCLK_PCLK_RATIO_SHIFT	8
-#define HCLK_PCLK_RATIO_MASK	0x3
-
-#define PERIP_CLK_CFG		(MISC_BASE + 0x028)
-/* PERIP_CLK_CFG register masks */
-#define UART_CLK_SHIFT		4
-#define UART_CLK_MASK		0x1
-#define FIRDA_CLK_SHIFT		5
-#define FIRDA_CLK_MASK		0x3
-#define GPT0_CLK_SHIFT		8
-#define GPT1_CLK_SHIFT		11
-#define GPT2_CLK_SHIFT		12
-#define GPT_CLK_MASK		0x1
-#define AUX_CLK_PLL3_VAL	0
-#define AUX_CLK_PLL1_VAL	1
-
-#define PERIP1_CLK_ENB		(MISC_BASE + 0x02C)
-/* PERIP1_CLK_ENB register masks */
-#define UART_CLK_ENB		3
-#define SSP_CLK_ENB		5
-#define I2C_CLK_ENB		7
-#define JPEG_CLK_ENB		8
-#define FIRDA_CLK_ENB		10
-#define GPT1_CLK_ENB		11
-#define GPT2_CLK_ENB		12
-#define ADC_CLK_ENB		15
-#define RTC_CLK_ENB		17
-#define GPIO_CLK_ENB		18
-#define DMA_CLK_ENB		19
-#define SMI_CLK_ENB		21
-#define GMAC_CLK_ENB		23
-#define USBD_CLK_ENB		24
-#define USBH_CLK_ENB		25
-#define C3_CLK_ENB		31
-
-#define SOC_CORE_ID		(MISC_BASE + 0x030)
-#define RAS_CLK_ENB		(MISC_BASE + 0x034)
-#define PERIP1_SOF_RST		(MISC_BASE + 0x038)
-/* PERIP1_SOF_RST register masks */
-#define JPEG_SOF_RST		8
-
-#define SOC_USER_ID		(MISC_BASE + 0x03C)
-#define RAS_SOF_RST		(MISC_BASE + 0x040)
-#define PRSC1_CLK_CFG		(MISC_BASE + 0x044)
-#define PRSC2_CLK_CFG		(MISC_BASE + 0x048)
-#define PRSC3_CLK_CFG		(MISC_BASE + 0x04C)
-/* gpt synthesizer register masks */
-#define GPT_MSCALE_SHIFT	0
-#define GPT_MSCALE_MASK		0xFFF
-#define GPT_NSCALE_SHIFT	12
-#define GPT_NSCALE_MASK		0xF
-
-#define AMEM_CLK_CFG		(MISC_BASE + 0x050)
-#define EXPI_CLK_CFG		(MISC_BASE + 0x054)
-#define CLCD_CLK_SYNT		(MISC_BASE + 0x05C)
-#define FIRDA_CLK_SYNT		(MISC_BASE + 0x060)
-#define UART_CLK_SYNT		(MISC_BASE + 0x064)
-#define GMAC_CLK_SYNT		(MISC_BASE + 0x068)
-#define RAS1_CLK_SYNT		(MISC_BASE + 0x06C)
-#define RAS2_CLK_SYNT		(MISC_BASE + 0x070)
-#define RAS3_CLK_SYNT		(MISC_BASE + 0x074)
-#define RAS4_CLK_SYNT		(MISC_BASE + 0x078)
-/* aux clk synthesiser register masks for irda to ras4 */
-#define AUX_SYNT_ENB		31
-#define AUX_EQ_SEL_SHIFT	30
-#define AUX_EQ_SEL_MASK		1
-#define AUX_EQ1_SEL		0
-#define AUX_EQ2_SEL		1
-#define AUX_XSCALE_SHIFT	16
-#define AUX_XSCALE_MASK		0xFFF
-#define AUX_YSCALE_SHIFT	0
-#define AUX_YSCALE_MASK		0xFFF
-
-#define ICM1_ARB_CFG		(MISC_BASE + 0x07C)
-#define ICM2_ARB_CFG		(MISC_BASE + 0x080)
-#define ICM3_ARB_CFG		(MISC_BASE + 0x084)
-#define ICM4_ARB_CFG		(MISC_BASE + 0x088)
-#define ICM5_ARB_CFG		(MISC_BASE + 0x08C)
-#define ICM6_ARB_CFG		(MISC_BASE + 0x090)
-#define ICM7_ARB_CFG		(MISC_BASE + 0x094)
-#define ICM8_ARB_CFG		(MISC_BASE + 0x098)
-#define ICM9_ARB_CFG		(MISC_BASE + 0x09C)
 #define DMA_CHN_CFG		(MISC_BASE + 0x0A0)
-#define USB2_PHY_CFG		(MISC_BASE + 0x0A4)
-#define GMAC_CFG_CTR		(MISC_BASE + 0x0A8)
-#define EXPI_CFG_CTR		(MISC_BASE + 0x0AC)
-#define PRC1_LOCK_CTR		(MISC_BASE + 0x0C0)
-#define PRC2_LOCK_CTR		(MISC_BASE + 0x0C4)
-#define PRC3_LOCK_CTR		(MISC_BASE + 0x0C8)
-#define PRC4_LOCK_CTR		(MISC_BASE + 0x0CC)
-#define PRC1_IRQ_CTR		(MISC_BASE + 0x0D0)
-#define PRC2_IRQ_CTR		(MISC_BASE + 0x0D4)
-#define PRC3_IRQ_CTR		(MISC_BASE + 0x0D8)
-#define PRC4_IRQ_CTR		(MISC_BASE + 0x0DC)
-#define PWRDOWN_CFG_CTR		(MISC_BASE + 0x0E0)
-#define COMPSSTL_1V8_CFG	(MISC_BASE + 0x0E4)
-#define COMPSSTL_2V5_CFG	(MISC_BASE + 0x0E8)
-#define COMPCOR_3V3_CFG		(MISC_BASE + 0x0EC)
-#define SSTLPAD_CFG_CTR		(MISC_BASE + 0x0F0)
-#define BIST1_CFG_CTR		(MISC_BASE + 0x0F4)
-#define BIST2_CFG_CTR		(MISC_BASE + 0x0F8)
-#define BIST3_CFG_CTR		(MISC_BASE + 0x0FC)
-#define BIST4_CFG_CTR		(MISC_BASE + 0x100)
-#define BIST5_CFG_CTR		(MISC_BASE + 0x104)
-#define BIST1_STS_RES		(MISC_BASE + 0x108)
-#define BIST2_STS_RES		(MISC_BASE + 0x10C)
-#define BIST3_STS_RES		(MISC_BASE + 0x110)
-#define BIST4_STS_RES		(MISC_BASE + 0x114)
-#define BIST5_STS_RES		(MISC_BASE + 0x118)
-#define SYSERR_CFG_CTR		(MISC_BASE + 0x11C)
 
 #endif /* __MACH_MISC_REGS_H */
diff --git a/arch/arm/mach-spear3xx/include/mach/spear.h b/arch/arm/mach-spear3xx/include/mach/spear.h
index 63fd98356919..51eb953148a9 100644
--- a/arch/arm/mach-spear3xx/include/mach/spear.h
+++ b/arch/arm/mach-spear3xx/include/mach/spear.h
@@ -15,60 +15,26 @@
 #define __MACH_SPEAR3XX_H
 
 #include <asm/memory.h>
-#include <mach/spear300.h>
-#include <mach/spear310.h>
-#include <mach/spear320.h>
-
-#define SPEAR3XX_ML_SDRAM_BASE		UL(0x00000000)
-
-#define SPEAR3XX_ICM9_BASE		UL(0xC0000000)
 
 /* ICM1 - Low speed connection */
 #define SPEAR3XX_ICM1_2_BASE		UL(0xD0000000)
+#define VA_SPEAR3XX_ICM1_2_BASE		UL(0xFD000000)
 #define SPEAR3XX_ICM1_UART_BASE		UL(0xD0000000)
-#define VA_SPEAR3XX_ICM1_UART_BASE	IO_ADDRESS(SPEAR3XX_ICM1_UART_BASE)
-#define SPEAR3XX_ICM1_ADC_BASE		UL(0xD0080000)
+#define VA_SPEAR3XX_ICM1_UART_BASE	(VA_SPEAR3XX_ICM1_2_BASE | SPEAR3XX_ICM1_UART_BASE)
 #define SPEAR3XX_ICM1_SSP_BASE		UL(0xD0100000)
-#define SPEAR3XX_ICM1_I2C_BASE		UL(0xD0180000)
-#define SPEAR3XX_ICM1_JPEG_BASE		UL(0xD0800000)
-#define SPEAR3XX_ICM1_IRDA_BASE		UL(0xD1000000)
-#define SPEAR3XX_ICM1_SRAM_BASE		UL(0xD2800000)
-
-/* ICM2 - Application Subsystem */
-#define SPEAR3XX_ICM2_HWACCEL0_BASE	UL(0xD8800000)
-#define SPEAR3XX_ICM2_HWACCEL1_BASE	UL(0xD9000000)
-
-/* ICM4 - High Speed Connection */
-#define SPEAR3XX_ICM4_BASE		UL(0xE0000000)
-#define SPEAR3XX_ICM4_MII_BASE		UL(0xE0800000)
-#define SPEAR3XX_ICM4_USBD_FIFO_BASE	UL(0xE1000000)
-#define SPEAR3XX_ICM4_USBD_CSR_BASE	UL(0xE1100000)
-#define SPEAR3XX_ICM4_USBD_PLDT_BASE	UL(0xE1200000)
-#define SPEAR3XX_ICM4_USB_EHCI0_1_BASE	UL(0xE1800000)
-#define SPEAR3XX_ICM4_USB_OHCI0_BASE	UL(0xE1900000)
-#define SPEAR3XX_ICM4_USB_OHCI1_BASE	UL(0xE2100000)
-#define SPEAR3XX_ICM4_USB_ARB_BASE	UL(0xE2800000)
 
 /* ML1 - Multi Layer CPU Subsystem */
 #define SPEAR3XX_ICM3_ML1_2_BASE	UL(0xF0000000)
-#define SPEAR3XX_ML1_TMR_BASE		UL(0xF0000000)
-#define SPEAR3XX_ML1_VIC_BASE		UL(0xF1100000)
-#define VA_SPEAR3XX_ML1_VIC_BASE	IO_ADDRESS(SPEAR3XX_ML1_VIC_BASE)
+#define VA_SPEAR6XX_ML_CPU_BASE		UL(0xF0000000)
 
 /* ICM3 - Basic Subsystem */
-#define SPEAR3XX_ICM3_SMEM_BASE		UL(0xF8000000)
 #define SPEAR3XX_ICM3_SMI_CTRL_BASE	UL(0xFC000000)
+#define VA_SPEAR3XX_ICM3_SMI_CTRL_BASE	UL(0xFC000000)
 #define SPEAR3XX_ICM3_DMA_BASE		UL(0xFC400000)
-#define SPEAR3XX_ICM3_SDRAM_CTRL_BASE	UL(0xFC600000)
-#define SPEAR3XX_ICM3_TMR0_BASE		UL(0xFC800000)
-#define SPEAR3XX_ICM3_WDT_BASE		UL(0xFC880000)
-#define SPEAR3XX_ICM3_RTC_BASE		UL(0xFC900000)
-#define SPEAR3XX_ICM3_GPIO_BASE		UL(0xFC980000)
 #define SPEAR3XX_ICM3_SYS_CTRL_BASE	UL(0xFCA00000)
-#define VA_SPEAR3XX_ICM3_SYS_CTRL_BASE	IO_ADDRESS(SPEAR3XX_ICM3_SYS_CTRL_BASE)
+#define VA_SPEAR3XX_ICM3_SYS_CTRL_BASE	(VA_SPEAR3XX_ICM3_SMI_CTRL_BASE | SPEAR3XX_ICM3_SYS_CTRL_BASE)
 #define SPEAR3XX_ICM3_MISC_REG_BASE	UL(0xFCA80000)
-#define VA_SPEAR3XX_ICM3_MISC_REG_BASE	IO_ADDRESS(SPEAR3XX_ICM3_MISC_REG_BASE)
-#define SPEAR3XX_ICM3_TMR1_BASE		UL(0xFCB00000)
+#define VA_SPEAR3XX_ICM3_MISC_REG_BASE	(VA_SPEAR3XX_ICM3_SMI_CTRL_BASE | SPEAR3XX_ICM3_MISC_REG_BASE)
 
 /* Debug uart for linux, will be used for debug and uncompress messages */
 #define SPEAR_DBG_UART_BASE		SPEAR3XX_ICM1_UART_BASE
@@ -78,4 +44,17 @@
 #define SPEAR_SYS_CTRL_BASE		SPEAR3XX_ICM3_SYS_CTRL_BASE
 #define VA_SPEAR_SYS_CTRL_BASE		VA_SPEAR3XX_ICM3_SYS_CTRL_BASE
 
+/* SPEAr320 Macros */
+#define SPEAR320_SOC_CONFIG_BASE	UL(0xB3000000)
+#define VA_SPEAR320_SOC_CONFIG_BASE	UL(0xFE000000)
+#define SPEAR320_CONTROL_REG		IOMEM(VA_SPEAR320_SOC_CONFIG_BASE)
+#define SPEAR320_EXT_CTRL_REG		IOMEM(VA_SPEAR320_SOC_CONFIG_BASE + 0x0018)
+	#define SPEAR320_UARTX_PCLK_MASK		0x1
+	#define SPEAR320_UART2_PCLK_SHIFT		8
+	#define SPEAR320_UART3_PCLK_SHIFT		9
+	#define SPEAR320_UART4_PCLK_SHIFT		10
+	#define SPEAR320_UART5_PCLK_SHIFT		11
+	#define SPEAR320_UART6_PCLK_SHIFT		12
+	#define SPEAR320_RS485_PCLK_SHIFT		13
+
 #endif /* __MACH_SPEAR3XX_H */
diff --git a/arch/arm/mach-spear3xx/include/mach/spear300.h b/arch/arm/mach-spear3xx/include/mach/spear300.h
deleted file mode 100644
index 3b6ea0729040..000000000000
--- a/arch/arm/mach-spear3xx/include/mach/spear300.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/include/mach/spear300.h
- *
- * SPEAr300 Machine specific definition
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifdef	CONFIG_MACH_SPEAR300
-
-#ifndef __MACH_SPEAR300_H
-#define __MACH_SPEAR300_H
-
-/* Base address of various IPs */
-#define SPEAR300_TELECOM_BASE		UL(0x50000000)
-
-/* Interrupt registers offsets and masks */
-#define SPEAR300_INT_ENB_MASK_REG	0x54
-#define SPEAR300_INT_STS_MASK_REG	0x58
-#define SPEAR300_IT_PERS_S_IRQ_MASK	(1 << 0)
-#define SPEAR300_IT_CHANGE_S_IRQ_MASK	(1 << 1)
-#define SPEAR300_I2S_IRQ_MASK		(1 << 2)
-#define SPEAR300_TDM_IRQ_MASK		(1 << 3)
-#define SPEAR300_CAMERA_L_IRQ_MASK	(1 << 4)
-#define SPEAR300_CAMERA_F_IRQ_MASK	(1 << 5)
-#define SPEAR300_CAMERA_V_IRQ_MASK	(1 << 6)
-#define SPEAR300_KEYBOARD_IRQ_MASK	(1 << 7)
-#define SPEAR300_GPIO1_IRQ_MASK		(1 << 8)
-
-#define SPEAR300_SHIRQ_RAS1_MASK	0x1FF
-
-#define SPEAR300_CLCD_BASE		UL(0x60000000)
-#define SPEAR300_SDHCI_BASE		UL(0x70000000)
-#define SPEAR300_NAND_0_BASE		UL(0x80000000)
-#define SPEAR300_NAND_1_BASE		UL(0x84000000)
-#define SPEAR300_NAND_2_BASE		UL(0x88000000)
-#define SPEAR300_NAND_3_BASE		UL(0x8c000000)
-#define SPEAR300_NOR_0_BASE		UL(0x90000000)
-#define SPEAR300_NOR_1_BASE		UL(0x91000000)
-#define SPEAR300_NOR_2_BASE		UL(0x92000000)
-#define SPEAR300_NOR_3_BASE		UL(0x93000000)
-#define SPEAR300_FSMC_BASE		UL(0x94000000)
-#define SPEAR300_SOC_CONFIG_BASE	UL(0x99000000)
-#define SPEAR300_KEYBOARD_BASE		UL(0xA0000000)
-#define SPEAR300_GPIO_BASE		UL(0xA9000000)
-
-#endif /* __MACH_SPEAR300_H */
-
-#endif /* CONFIG_MACH_SPEAR300 */
diff --git a/arch/arm/mach-spear3xx/include/mach/spear310.h b/arch/arm/mach-spear3xx/include/mach/spear310.h
deleted file mode 100644
index 1567d0da725f..000000000000
--- a/arch/arm/mach-spear3xx/include/mach/spear310.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/include/mach/spear310.h
- *
- * SPEAr310 Machine specific definition
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifdef	CONFIG_MACH_SPEAR310
-
-#ifndef __MACH_SPEAR310_H
-#define __MACH_SPEAR310_H
-
-#define SPEAR310_NAND_BASE		UL(0x40000000)
-#define SPEAR310_FSMC_BASE		UL(0x44000000)
-#define SPEAR310_UART1_BASE		UL(0xB2000000)
-#define SPEAR310_UART2_BASE		UL(0xB2080000)
-#define SPEAR310_UART3_BASE		UL(0xB2100000)
-#define SPEAR310_UART4_BASE		UL(0xB2180000)
-#define SPEAR310_UART5_BASE		UL(0xB2200000)
-#define SPEAR310_HDLC_BASE		UL(0xB2800000)
-#define SPEAR310_RS485_0_BASE		UL(0xB3000000)
-#define SPEAR310_RS485_1_BASE		UL(0xB3800000)
-#define SPEAR310_SOC_CONFIG_BASE	UL(0xB4000000)
-
-/* Interrupt registers offsets and masks */
-#define SPEAR310_INT_STS_MASK_REG	0x04
-#define SPEAR310_SMII0_IRQ_MASK		(1 << 0)
-#define SPEAR310_SMII1_IRQ_MASK		(1 << 1)
-#define SPEAR310_SMII2_IRQ_MASK		(1 << 2)
-#define SPEAR310_SMII3_IRQ_MASK		(1 << 3)
-#define SPEAR310_WAKEUP_SMII0_IRQ_MASK	(1 << 4)
-#define SPEAR310_WAKEUP_SMII1_IRQ_MASK	(1 << 5)
-#define SPEAR310_WAKEUP_SMII2_IRQ_MASK	(1 << 6)
-#define SPEAR310_WAKEUP_SMII3_IRQ_MASK	(1 << 7)
-#define SPEAR310_UART1_IRQ_MASK		(1 << 8)
-#define SPEAR310_UART2_IRQ_MASK		(1 << 9)
-#define SPEAR310_UART3_IRQ_MASK		(1 << 10)
-#define SPEAR310_UART4_IRQ_MASK		(1 << 11)
-#define SPEAR310_UART5_IRQ_MASK		(1 << 12)
-#define SPEAR310_EMI_IRQ_MASK		(1 << 13)
-#define SPEAR310_TDM_HDLC_IRQ_MASK	(1 << 14)
-#define SPEAR310_RS485_0_IRQ_MASK	(1 << 15)
-#define SPEAR310_RS485_1_IRQ_MASK	(1 << 16)
-
-#define SPEAR310_SHIRQ_RAS1_MASK	0x000FF
-#define SPEAR310_SHIRQ_RAS2_MASK	0x01F00
-#define SPEAR310_SHIRQ_RAS3_MASK	0x02000
-#define SPEAR310_SHIRQ_INTRCOMM_RAS_MASK	0x1C000
-
-#endif /* __MACH_SPEAR310_H */
-
-#endif /* CONFIG_MACH_SPEAR310 */
diff --git a/arch/arm/mach-spear3xx/include/mach/spear320.h b/arch/arm/mach-spear3xx/include/mach/spear320.h
deleted file mode 100644
index 8cfa83fa1296..000000000000
--- a/arch/arm/mach-spear3xx/include/mach/spear320.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/include/mach/spear320.h
- *
- * SPEAr320 Machine specific definition
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifdef	CONFIG_MACH_SPEAR320
-
-#ifndef __MACH_SPEAR320_H
-#define __MACH_SPEAR320_H
-
-#define SPEAR320_EMI_CTRL_BASE		UL(0x40000000)
-#define SPEAR320_FSMC_BASE		UL(0x4C000000)
-#define SPEAR320_NAND_BASE		UL(0x50000000)
-#define SPEAR320_I2S_BASE		UL(0x60000000)
-#define SPEAR320_SDHCI_BASE		UL(0x70000000)
-#define SPEAR320_CLCD_BASE		UL(0x90000000)
-#define SPEAR320_PAR_PORT_BASE		UL(0xA0000000)
-#define SPEAR320_CAN0_BASE		UL(0xA1000000)
-#define SPEAR320_CAN1_BASE		UL(0xA2000000)
-#define SPEAR320_UART1_BASE		UL(0xA3000000)
-#define SPEAR320_UART2_BASE		UL(0xA4000000)
-#define SPEAR320_SSP0_BASE		UL(0xA5000000)
-#define SPEAR320_SSP1_BASE		UL(0xA6000000)
-#define SPEAR320_I2C_BASE		UL(0xA7000000)
-#define SPEAR320_PWM_BASE		UL(0xA8000000)
-#define SPEAR320_SMII0_BASE		UL(0xAA000000)
-#define SPEAR320_SMII1_BASE		UL(0xAB000000)
-#define SPEAR320_SOC_CONFIG_BASE	UL(0xB3000000)
-
-/* Interrupt registers offsets and masks */
-#define SPEAR320_INT_STS_MASK_REG		0x04
-#define SPEAR320_INT_CLR_MASK_REG		0x04
-#define SPEAR320_INT_ENB_MASK_REG		0x08
-#define SPEAR320_GPIO_IRQ_MASK			(1 << 0)
-#define SPEAR320_I2S_PLAY_IRQ_MASK		(1 << 1)
-#define SPEAR320_I2S_REC_IRQ_MASK		(1 << 2)
-#define SPEAR320_EMI_IRQ_MASK			(1 << 7)
-#define SPEAR320_CLCD_IRQ_MASK			(1 << 8)
-#define SPEAR320_SPP_IRQ_MASK			(1 << 9)
-#define SPEAR320_SDHCI_IRQ_MASK			(1 << 10)
-#define SPEAR320_CAN_U_IRQ_MASK			(1 << 11)
-#define SPEAR320_CAN_L_IRQ_MASK			(1 << 12)
-#define SPEAR320_UART1_IRQ_MASK			(1 << 13)
-#define SPEAR320_UART2_IRQ_MASK			(1 << 14)
-#define SPEAR320_SSP1_IRQ_MASK			(1 << 15)
-#define SPEAR320_SSP2_IRQ_MASK			(1 << 16)
-#define SPEAR320_SMII0_IRQ_MASK			(1 << 17)
-#define SPEAR320_MII1_SMII1_IRQ_MASK		(1 << 18)
-#define SPEAR320_WAKEUP_SMII0_IRQ_MASK		(1 << 19)
-#define SPEAR320_WAKEUP_MII1_SMII1_IRQ_MASK	(1 << 20)
-#define SPEAR320_I2C1_IRQ_MASK			(1 << 21)
-
-#define SPEAR320_SHIRQ_RAS1_MASK		0x000380
-#define SPEAR320_SHIRQ_RAS3_MASK		0x000007
-#define SPEAR320_SHIRQ_INTRCOMM_RAS_MASK	0x3FF800
-
-#endif /* __MACH_SPEAR320_H */
-
-#endif /* CONFIG_MACH_SPEAR320 */
diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c
index f7db66812abb..f74a05bdb829 100644
--- a/arch/arm/mach-spear3xx/spear300.c
+++ b/arch/arm/mach-spear3xx/spear300.c
@@ -3,372 +3,62 @@
  *
  * SPEAr300 machine source file
  *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Copyright (C) 2009-2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
 
-#include <linux/types.h>
-#include <linux/amba/pl061.h>
-#include <linux/ptrace.h>
-#include <asm/irq.h>
+#define pr_fmt(fmt) "SPEAr300: " fmt
+
+#include <linux/amba/pl08x.h>
+#include <linux/of_platform.h>
+#include <asm/hardware/vic.h>
+#include <asm/mach/arch.h>
 #include <plat/shirq.h>
 #include <mach/generic.h>
-#include <mach/hardware.h>
-
-/* pad multiplexing support */
-/* muxing registers */
-#define PAD_MUX_CONFIG_REG	0x00
-#define MODE_CONFIG_REG		0x04
-
-/* modes */
-#define NAND_MODE			(1 << 0)
-#define NOR_MODE			(1 << 1)
-#define PHOTO_FRAME_MODE		(1 << 2)
-#define LEND_IP_PHONE_MODE		(1 << 3)
-#define HEND_IP_PHONE_MODE		(1 << 4)
-#define LEND_WIFI_PHONE_MODE		(1 << 5)
-#define HEND_WIFI_PHONE_MODE		(1 << 6)
-#define ATA_PABX_WI2S_MODE		(1 << 7)
-#define ATA_PABX_I2S_MODE		(1 << 8)
-#define CAML_LCDW_MODE			(1 << 9)
-#define CAMU_LCD_MODE			(1 << 10)
-#define CAMU_WLCD_MODE			(1 << 11)
-#define CAML_LCD_MODE			(1 << 12)
-#define ALL_MODES			0x1FFF
-
-struct pmx_mode spear300_nand_mode = {
-	.id = NAND_MODE,
-	.name = "nand mode",
-	.mask = 0x00,
-};
-
-struct pmx_mode spear300_nor_mode = {
-	.id = NOR_MODE,
-	.name = "nor mode",
-	.mask = 0x01,
-};
-
-struct pmx_mode spear300_photo_frame_mode = {
-	.id = PHOTO_FRAME_MODE,
-	.name = "photo frame mode",
-	.mask = 0x02,
-};
-
-struct pmx_mode spear300_lend_ip_phone_mode = {
-	.id = LEND_IP_PHONE_MODE,
-	.name = "lend ip phone mode",
-	.mask = 0x03,
-};
-
-struct pmx_mode spear300_hend_ip_phone_mode = {
-	.id = HEND_IP_PHONE_MODE,
-	.name = "hend ip phone mode",
-	.mask = 0x04,
-};
-
-struct pmx_mode spear300_lend_wifi_phone_mode = {
-	.id = LEND_WIFI_PHONE_MODE,
-	.name = "lend wifi phone mode",
-	.mask = 0x05,
-};
-
-struct pmx_mode spear300_hend_wifi_phone_mode = {
-	.id = HEND_WIFI_PHONE_MODE,
-	.name = "hend wifi phone mode",
-	.mask = 0x06,
-};
-
-struct pmx_mode spear300_ata_pabx_wi2s_mode = {
-	.id = ATA_PABX_WI2S_MODE,
-	.name = "ata pabx wi2s mode",
-	.mask = 0x07,
-};
-
-struct pmx_mode spear300_ata_pabx_i2s_mode = {
-	.id = ATA_PABX_I2S_MODE,
-	.name = "ata pabx i2s mode",
-	.mask = 0x08,
-};
-
-struct pmx_mode spear300_caml_lcdw_mode = {
-	.id = CAML_LCDW_MODE,
-	.name = "caml lcdw mode",
-	.mask = 0x0C,
-};
-
-struct pmx_mode spear300_camu_lcd_mode = {
-	.id = CAMU_LCD_MODE,
-	.name = "camu lcd mode",
-	.mask = 0x0D,
-};
-
-struct pmx_mode spear300_camu_wlcd_mode = {
-	.id = CAMU_WLCD_MODE,
-	.name = "camu wlcd mode",
-	.mask = 0x0E,
-};
-
-struct pmx_mode spear300_caml_lcd_mode = {
-	.id = CAML_LCD_MODE,
-	.name = "caml lcd mode",
-	.mask = 0x0F,
-};
-
-/* devices */
-static struct pmx_dev_mode pmx_fsmc_2_chips_modes[] = {
-	{
-		.ids = NAND_MODE | NOR_MODE | PHOTO_FRAME_MODE |
-			ATA_PABX_WI2S_MODE | ATA_PABX_I2S_MODE,
-		.mask = PMX_FIRDA_MASK,
-	},
-};
-
-struct pmx_dev spear300_pmx_fsmc_2_chips = {
-	.name = "fsmc_2_chips",
-	.modes = pmx_fsmc_2_chips_modes,
-	.mode_count = ARRAY_SIZE(pmx_fsmc_2_chips_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_fsmc_4_chips_modes[] = {
-	{
-		.ids = NAND_MODE | NOR_MODE | PHOTO_FRAME_MODE |
-			ATA_PABX_WI2S_MODE | ATA_PABX_I2S_MODE,
-		.mask = PMX_FIRDA_MASK | PMX_UART0_MASK,
-	},
-};
-
-struct pmx_dev spear300_pmx_fsmc_4_chips = {
-	.name = "fsmc_4_chips",
-	.modes = pmx_fsmc_4_chips_modes,
-	.mode_count = ARRAY_SIZE(pmx_fsmc_4_chips_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_keyboard_modes[] = {
-	{
-		.ids = LEND_IP_PHONE_MODE | HEND_IP_PHONE_MODE |
-			LEND_WIFI_PHONE_MODE | HEND_WIFI_PHONE_MODE |
-			CAML_LCDW_MODE | CAMU_LCD_MODE | CAMU_WLCD_MODE |
-			CAML_LCD_MODE,
-		.mask = 0x0,
-	},
-};
-
-struct pmx_dev spear300_pmx_keyboard = {
-	.name = "keyboard",
-	.modes = pmx_keyboard_modes,
-	.mode_count = ARRAY_SIZE(pmx_keyboard_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_clcd_modes[] = {
-	{
-		.ids = PHOTO_FRAME_MODE,
-		.mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK ,
-	}, {
-		.ids = HEND_IP_PHONE_MODE | HEND_WIFI_PHONE_MODE |
-			CAMU_LCD_MODE | CAML_LCD_MODE,
-		.mask = PMX_TIMER_3_4_MASK,
-	},
-};
-
-struct pmx_dev spear300_pmx_clcd = {
-	.name = "clcd",
-	.modes = pmx_clcd_modes,
-	.mode_count = ARRAY_SIZE(pmx_clcd_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_telecom_gpio_modes[] = {
-	{
-		.ids = PHOTO_FRAME_MODE | CAMU_LCD_MODE | CAML_LCD_MODE,
-		.mask = PMX_MII_MASK,
-	}, {
-		.ids = LEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE,
-		.mask = PMX_MII_MASK | PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK,
-	}, {
-		.ids = ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_WLCD_MODE,
-		.mask = PMX_MII_MASK | PMX_TIMER_3_4_MASK,
-	}, {
-		.ids = HEND_IP_PHONE_MODE | HEND_WIFI_PHONE_MODE,
-		.mask = PMX_MII_MASK | PMX_TIMER_1_2_MASK,
-	}, {
-		.ids = ATA_PABX_WI2S_MODE,
-		.mask = PMX_MII_MASK | PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK
-			| PMX_UART0_MODEM_MASK,
-	},
-};
-
-struct pmx_dev spear300_pmx_telecom_gpio = {
-	.name = "telecom_gpio",
-	.modes = pmx_telecom_gpio_modes,
-	.mode_count = ARRAY_SIZE(pmx_telecom_gpio_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_telecom_tdm_modes[] = {
-	{
-		.ids = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE |
-			HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE
-			| HEND_WIFI_PHONE_MODE | ATA_PABX_WI2S_MODE
-			| ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE
-			| CAMU_WLCD_MODE | CAML_LCD_MODE,
-		.mask = PMX_UART0_MODEM_MASK | PMX_SSP_CS_MASK,
-	},
-};
-
-struct pmx_dev spear300_pmx_telecom_tdm = {
-	.name = "telecom_tdm",
-	.modes = pmx_telecom_tdm_modes,
-	.mode_count = ARRAY_SIZE(pmx_telecom_tdm_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_telecom_spi_cs_i2c_clk_modes[] = {
-	{
-		.ids = LEND_IP_PHONE_MODE | HEND_IP_PHONE_MODE |
-			LEND_WIFI_PHONE_MODE | HEND_WIFI_PHONE_MODE
-			| ATA_PABX_WI2S_MODE | ATA_PABX_I2S_MODE |
-			CAML_LCDW_MODE | CAML_LCD_MODE,
-		.mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK,
-	},
-};
-
-struct pmx_dev spear300_pmx_telecom_spi_cs_i2c_clk = {
-	.name = "telecom_spi_cs_i2c_clk",
-	.modes = pmx_telecom_spi_cs_i2c_clk_modes,
-	.mode_count = ARRAY_SIZE(pmx_telecom_spi_cs_i2c_clk_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_telecom_camera_modes[] = {
-	{
-		.ids = CAML_LCDW_MODE | CAML_LCD_MODE,
-		.mask = PMX_MII_MASK,
-	}, {
-		.ids = CAMU_LCD_MODE | CAMU_WLCD_MODE,
-		.mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK | PMX_MII_MASK,
-	},
-};
-
-struct pmx_dev spear300_pmx_telecom_camera = {
-	.name = "telecom_camera",
-	.modes = pmx_telecom_camera_modes,
-	.mode_count = ARRAY_SIZE(pmx_telecom_camera_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_telecom_dac_modes[] = {
-	{
-		.ids = ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE
-			| CAMU_WLCD_MODE | CAML_LCD_MODE,
-		.mask = PMX_TIMER_1_2_MASK,
-	},
-};
-
-struct pmx_dev spear300_pmx_telecom_dac = {
-	.name = "telecom_dac",
-	.modes = pmx_telecom_dac_modes,
-	.mode_count = ARRAY_SIZE(pmx_telecom_dac_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_telecom_i2s_modes[] = {
-	{
-		.ids = LEND_IP_PHONE_MODE | HEND_IP_PHONE_MODE
-			| LEND_WIFI_PHONE_MODE | HEND_WIFI_PHONE_MODE |
-			ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE
-			| CAMU_WLCD_MODE | CAML_LCD_MODE,
-		.mask = PMX_UART0_MODEM_MASK,
-	},
-};
-
-struct pmx_dev spear300_pmx_telecom_i2s = {
-	.name = "telecom_i2s",
-	.modes = pmx_telecom_i2s_modes,
-	.mode_count = ARRAY_SIZE(pmx_telecom_i2s_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_telecom_boot_pins_modes[] = {
-	{
-		.ids = NAND_MODE | NOR_MODE,
-		.mask = PMX_UART0_MODEM_MASK | PMX_TIMER_1_2_MASK |
-			PMX_TIMER_3_4_MASK,
-	},
-};
-
-struct pmx_dev spear300_pmx_telecom_boot_pins = {
-	.name = "telecom_boot_pins",
-	.modes = pmx_telecom_boot_pins_modes,
-	.mode_count = ARRAY_SIZE(pmx_telecom_boot_pins_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_telecom_sdhci_4bit_modes[] = {
-	{
-		.ids = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE |
-			HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE |
-			HEND_WIFI_PHONE_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE |
-			CAMU_WLCD_MODE | CAML_LCD_MODE | ATA_PABX_WI2S_MODE |
-			ATA_PABX_I2S_MODE,
-		.mask = PMX_GPIO_PIN0_MASK | PMX_GPIO_PIN1_MASK |
-			PMX_GPIO_PIN2_MASK | PMX_GPIO_PIN3_MASK |
-			PMX_GPIO_PIN4_MASK | PMX_GPIO_PIN5_MASK,
-	},
-};
-
-struct pmx_dev spear300_pmx_telecom_sdhci_4bit = {
-	.name = "telecom_sdhci_4bit",
-	.modes = pmx_telecom_sdhci_4bit_modes,
-	.mode_count = ARRAY_SIZE(pmx_telecom_sdhci_4bit_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_telecom_sdhci_8bit_modes[] = {
-	{
-		.ids = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE |
-			HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE |
-			HEND_WIFI_PHONE_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE |
-			CAMU_WLCD_MODE | CAML_LCD_MODE,
-		.mask = PMX_GPIO_PIN0_MASK | PMX_GPIO_PIN1_MASK |
-			PMX_GPIO_PIN2_MASK | PMX_GPIO_PIN3_MASK |
-			PMX_GPIO_PIN4_MASK | PMX_GPIO_PIN5_MASK | PMX_MII_MASK,
-	},
-};
-
-struct pmx_dev spear300_pmx_telecom_sdhci_8bit = {
-	.name = "telecom_sdhci_8bit",
-	.modes = pmx_telecom_sdhci_8bit_modes,
-	.mode_count = ARRAY_SIZE(pmx_telecom_sdhci_8bit_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_gpio1_modes[] = {
-	{
-		.ids = PHOTO_FRAME_MODE,
-		.mask = PMX_UART0_MODEM_MASK | PMX_TIMER_1_2_MASK |
-			PMX_TIMER_3_4_MASK,
-	},
-};
-
-struct pmx_dev spear300_pmx_gpio1 = {
-	.name = "arm gpio1",
-	.modes = pmx_gpio1_modes,
-	.mode_count = ARRAY_SIZE(pmx_gpio1_modes),
-	.enb_on_reset = 1,
-};
-
-/* pmx driver structure */
-static struct pmx_driver pmx_driver = {
-	.mode_reg = {.offset = MODE_CONFIG_REG, .mask = 0x0000000f},
-	.mux_reg = {.offset = PAD_MUX_CONFIG_REG, .mask = 0x00007fff},
-};
+#include <mach/spear.h>
+
+/* Base address of various IPs */
+#define SPEAR300_TELECOM_BASE		UL(0x50000000)
+
+/* Interrupt registers offsets and masks */
+#define SPEAR300_INT_ENB_MASK_REG	0x54
+#define SPEAR300_INT_STS_MASK_REG	0x58
+#define SPEAR300_IT_PERS_S_IRQ_MASK	(1 << 0)
+#define SPEAR300_IT_CHANGE_S_IRQ_MASK	(1 << 1)
+#define SPEAR300_I2S_IRQ_MASK		(1 << 2)
+#define SPEAR300_TDM_IRQ_MASK		(1 << 3)
+#define SPEAR300_CAMERA_L_IRQ_MASK	(1 << 4)
+#define SPEAR300_CAMERA_F_IRQ_MASK	(1 << 5)
+#define SPEAR300_CAMERA_V_IRQ_MASK	(1 << 6)
+#define SPEAR300_KEYBOARD_IRQ_MASK	(1 << 7)
+#define SPEAR300_GPIO1_IRQ_MASK		(1 << 8)
+
+#define SPEAR300_SHIRQ_RAS1_MASK	0x1FF
+
+#define SPEAR300_SOC_CONFIG_BASE	UL(0x99000000)
+
+
+/* SPEAr300 Virtual irq definitions */
+/* IRQs sharing IRQ_GEN_RAS_1 */
+#define SPEAR300_VIRQ_IT_PERS_S			(SPEAR3XX_VIRQ_START + 0)
+#define SPEAR300_VIRQ_IT_CHANGE_S		(SPEAR3XX_VIRQ_START + 1)
+#define SPEAR300_VIRQ_I2S			(SPEAR3XX_VIRQ_START + 2)
+#define SPEAR300_VIRQ_TDM			(SPEAR3XX_VIRQ_START + 3)
+#define SPEAR300_VIRQ_CAMERA_L			(SPEAR3XX_VIRQ_START + 4)
+#define SPEAR300_VIRQ_CAMERA_F			(SPEAR3XX_VIRQ_START + 5)
+#define SPEAR300_VIRQ_CAMERA_V			(SPEAR3XX_VIRQ_START + 6)
+#define SPEAR300_VIRQ_KEYBOARD			(SPEAR3XX_VIRQ_START + 7)
+#define SPEAR300_VIRQ_GPIO1			(SPEAR3XX_VIRQ_START + 8)
+
+/* IRQs sharing IRQ_GEN_RAS_3 */
+#define SPEAR300_IRQ_CLCD			SPEAR3XX_IRQ_GEN_RAS_3
+
+/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
+#define SPEAR300_IRQ_SDHCI			SPEAR3XX_IRQ_INTRCOMM_RAS_ARM
 
 /* spear3xx shared irq */
 static struct shirq_dev_config shirq_ras1_config[] = {
@@ -423,45 +113,238 @@ static struct spear_shirq shirq_ras1 = {
 	},
 };
 
-/* Add spear300 specific devices here */
-/* arm gpio1 device registration */
-static struct pl061_platform_data gpio1_plat_data = {
-	.gpio_base	= 8,
-	.irq_base	= SPEAR300_GPIO1_INT_BASE,
+/* DMAC platform data's slave info */
+struct pl08x_channel_data spear300_dma_info[] = {
+	{
+		.bus_id = "uart0_rx",
+		.min_signal = 2,
+		.max_signal = 2,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart0_tx",
+		.min_signal = 3,
+		.max_signal = 3,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ssp0_rx",
+		.min_signal = 8,
+		.max_signal = 8,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ssp0_tx",
+		.min_signal = 9,
+		.max_signal = 9,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "i2c_rx",
+		.min_signal = 10,
+		.max_signal = 10,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "i2c_tx",
+		.min_signal = 11,
+		.max_signal = 11,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "irda",
+		.min_signal = 12,
+		.max_signal = 12,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "adc",
+		.min_signal = 13,
+		.max_signal = 13,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "to_jpeg",
+		.min_signal = 14,
+		.max_signal = 14,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "from_jpeg",
+		.min_signal = 15,
+		.max_signal = 15,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras0_rx",
+		.min_signal = 0,
+		.max_signal = 0,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras0_tx",
+		.min_signal = 1,
+		.max_signal = 1,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras1_rx",
+		.min_signal = 2,
+		.max_signal = 2,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras1_tx",
+		.min_signal = 3,
+		.max_signal = 3,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras2_rx",
+		.min_signal = 4,
+		.max_signal = 4,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras2_tx",
+		.min_signal = 5,
+		.max_signal = 5,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras3_rx",
+		.min_signal = 6,
+		.max_signal = 6,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras3_tx",
+		.min_signal = 7,
+		.max_signal = 7,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras4_rx",
+		.min_signal = 8,
+		.max_signal = 8,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras4_tx",
+		.min_signal = 9,
+		.max_signal = 9,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras5_rx",
+		.min_signal = 10,
+		.max_signal = 10,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras5_tx",
+		.min_signal = 11,
+		.max_signal = 11,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras6_rx",
+		.min_signal = 12,
+		.max_signal = 12,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras6_tx",
+		.min_signal = 13,
+		.max_signal = 13,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras7_rx",
+		.min_signal = 14,
+		.max_signal = 14,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras7_tx",
+		.min_signal = 15,
+		.max_signal = 15,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	},
 };
 
-AMBA_APB_DEVICE(spear300_gpio1, "gpio1", 0, SPEAR300_GPIO_BASE,
-	{SPEAR300_VIRQ_GPIO1}, &gpio1_plat_data);
+/* Add SPEAr300 auxdata to pass platform data */
+static struct of_dev_auxdata spear300_auxdata_lookup[] __initdata = {
+	OF_DEV_AUXDATA("arm,pl022", SPEAR3XX_ICM1_SSP_BASE, NULL,
+			&pl022_plat_data),
+	OF_DEV_AUXDATA("arm,pl080", SPEAR3XX_ICM3_DMA_BASE, NULL,
+			&pl080_plat_data),
+	{}
+};
 
-/* spear300 routines */
-void __init spear300_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
-		u8 pmx_dev_count)
+static void __init spear300_dt_init(void)
 {
-	int ret = 0;
+	int ret;
+
+	pl080_plat_data.slave_channels = spear300_dma_info;
+	pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear300_dma_info);
 
-	/* call spear3xx family common init function */
-	spear3xx_init();
+	of_platform_populate(NULL, of_default_bus_match_table,
+			spear300_auxdata_lookup, NULL);
 
 	/* shared irq registration */
 	shirq_ras1.regs.base = ioremap(SPEAR300_TELECOM_BASE, SZ_4K);
 	if (shirq_ras1.regs.base) {
 		ret = spear_shirq_register(&shirq_ras1);
 		if (ret)
-			printk(KERN_ERR "Error registering Shared IRQ\n");
+			pr_err("Error registering Shared IRQ\n");
 	}
+}
 
-	/* pmx initialization */
-	pmx_driver.mode = pmx_mode;
-	pmx_driver.devs = pmx_devs;
-	pmx_driver.devs_count = pmx_dev_count;
+static const char * const spear300_dt_board_compat[] = {
+	"st,spear300",
+	"st,spear300-evb",
+	NULL,
+};
 
-	pmx_driver.base = ioremap(SPEAR300_SOC_CONFIG_BASE, SZ_4K);
-	if (pmx_driver.base) {
-		ret = pmx_register(&pmx_driver);
-		if (ret)
-			printk(KERN_ERR "padmux: registration failed. err no"
-					": %d\n", ret);
-		/* Free Mapping, device selection already done */
-		iounmap(pmx_driver.base);
-	}
+static void __init spear300_map_io(void)
+{
+	spear3xx_map_io();
 }
+
+DT_MACHINE_START(SPEAR300_DT, "ST SPEAr300 SoC with Flattened Device Tree")
+	.map_io		=	spear300_map_io,
+	.init_irq	=	spear3xx_dt_init_irq,
+	.handle_irq	=	vic_handle_irq,
+	.timer		=	&spear3xx_timer,
+	.init_machine	=	spear300_dt_init,
+	.restart	=	spear_restart,
+	.dt_compat	=	spear300_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-spear3xx/spear300_evb.c b/arch/arm/mach-spear3xx/spear300_evb.c
deleted file mode 100644
index 3462ab9d6122..000000000000
--- a/arch/arm/mach-spear3xx/spear300_evb.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/spear300_evb.c
- *
- * SPEAr300 evaluation board source file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/hardware/vic.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-#include <mach/generic.h>
-#include <mach/hardware.h>
-
-/* padmux devices to enable */
-static struct pmx_dev *pmx_devs[] = {
-	/* spear3xx specific devices */
-	&spear3xx_pmx_i2c,
-	&spear3xx_pmx_ssp_cs,
-	&spear3xx_pmx_ssp,
-	&spear3xx_pmx_mii,
-	&spear3xx_pmx_uart0,
-
-	/* spear300 specific devices */
-	&spear300_pmx_fsmc_2_chips,
-	&spear300_pmx_clcd,
-	&spear300_pmx_telecom_sdhci_4bit,
-	&spear300_pmx_gpio1,
-};
-
-static struct amba_device *amba_devs[] __initdata = {
-	/* spear3xx specific devices */
-	&spear3xx_gpio_device,
-	&spear3xx_uart_device,
-
-	/* spear300 specific devices */
-	&spear300_gpio1_device,
-};
-
-static struct platform_device *plat_devs[] __initdata = {
-	/* spear3xx specific devices */
-
-	/* spear300 specific devices */
-};
-
-static void __init spear300_evb_init(void)
-{
-	unsigned int i;
-
-	/* call spear300 machine init function */
-	spear300_init(&spear300_photo_frame_mode, pmx_devs,
-			ARRAY_SIZE(pmx_devs));
-
-	/* Add Platform Devices */
-	platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));
-
-	/* Add Amba Devices */
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
-		amba_device_register(amba_devs[i], &iomem_resource);
-}
-
-MACHINE_START(SPEAR300, "ST-SPEAR300-EVB")
-	.atag_offset	=	0x100,
-	.map_io		=	spear3xx_map_io,
-	.init_irq	=	spear3xx_init_irq,
-	.handle_irq	=	vic_handle_irq,
-	.timer		=	&spear3xx_timer,
-	.init_machine	=	spear300_evb_init,
-	.restart	=	spear_restart,
-MACHINE_END
diff --git a/arch/arm/mach-spear3xx/spear310.c b/arch/arm/mach-spear3xx/spear310.c
index febaa6fcfb6a..84dfb0900747 100644
--- a/arch/arm/mach-spear3xx/spear310.c
+++ b/arch/arm/mach-spear3xx/spear310.c
@@ -3,141 +3,84 @@
  *
  * SPEAr310 machine source file
  *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Copyright (C) 2009-2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
 
-#include <linux/ptrace.h>
-#include <asm/irq.h>
+#define pr_fmt(fmt) "SPEAr310: " fmt
+
+#include <linux/amba/pl08x.h>
+#include <linux/amba/serial.h>
+#include <linux/of_platform.h>
+#include <asm/hardware/vic.h>
+#include <asm/mach/arch.h>
 #include <plat/shirq.h>
 #include <mach/generic.h>
-#include <mach/hardware.h>
-
-/* pad multiplexing support */
-/* muxing registers */
-#define PAD_MUX_CONFIG_REG	0x08
-
-/* devices */
-static struct pmx_dev_mode pmx_emi_cs_0_1_4_5_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_TIMER_3_4_MASK,
-	},
-};
-
-struct pmx_dev spear310_pmx_emi_cs_0_1_4_5 = {
-	.name = "emi_cs_0_1_4_5",
-	.modes = pmx_emi_cs_0_1_4_5_modes,
-	.mode_count = ARRAY_SIZE(pmx_emi_cs_0_1_4_5_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_emi_cs_2_3_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_TIMER_1_2_MASK,
-	},
-};
-
-struct pmx_dev spear310_pmx_emi_cs_2_3 = {
-	.name = "emi_cs_2_3",
-	.modes = pmx_emi_cs_2_3_modes,
-	.mode_count = ARRAY_SIZE(pmx_emi_cs_2_3_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_uart1_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_FIRDA_MASK,
-	},
-};
-
-struct pmx_dev spear310_pmx_uart1 = {
-	.name = "uart1",
-	.modes = pmx_uart1_modes,
-	.mode_count = ARRAY_SIZE(pmx_uart1_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_uart2_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_TIMER_1_2_MASK,
-	},
-};
-
-struct pmx_dev spear310_pmx_uart2 = {
-	.name = "uart2",
-	.modes = pmx_uart2_modes,
-	.mode_count = ARRAY_SIZE(pmx_uart2_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_uart3_4_5_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_UART0_MODEM_MASK,
-	},
-};
-
-struct pmx_dev spear310_pmx_uart3_4_5 = {
-	.name = "uart3_4_5",
-	.modes = pmx_uart3_4_5_modes,
-	.mode_count = ARRAY_SIZE(pmx_uart3_4_5_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_fsmc_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_SSP_CS_MASK,
-	},
-};
-
-struct pmx_dev spear310_pmx_fsmc = {
-	.name = "fsmc",
-	.modes = pmx_fsmc_modes,
-	.mode_count = ARRAY_SIZE(pmx_fsmc_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_rs485_0_1_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_MII_MASK,
-	},
-};
-
-struct pmx_dev spear310_pmx_rs485_0_1 = {
-	.name = "rs485_0_1",
-	.modes = pmx_rs485_0_1_modes,
-	.mode_count = ARRAY_SIZE(pmx_rs485_0_1_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_tdm0_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_MII_MASK,
-	},
-};
-
-struct pmx_dev spear310_pmx_tdm0 = {
-	.name = "tdm0",
-	.modes = pmx_tdm0_modes,
-	.mode_count = ARRAY_SIZE(pmx_tdm0_modes),
-	.enb_on_reset = 1,
-};
+#include <mach/spear.h>
+
+#define SPEAR310_UART1_BASE		UL(0xB2000000)
+#define SPEAR310_UART2_BASE		UL(0xB2080000)
+#define SPEAR310_UART3_BASE		UL(0xB2100000)
+#define SPEAR310_UART4_BASE		UL(0xB2180000)
+#define SPEAR310_UART5_BASE		UL(0xB2200000)
+#define SPEAR310_SOC_CONFIG_BASE	UL(0xB4000000)
+
+/* Interrupt registers offsets and masks */
+#define SPEAR310_INT_STS_MASK_REG	0x04
+#define SPEAR310_SMII0_IRQ_MASK		(1 << 0)
+#define SPEAR310_SMII1_IRQ_MASK		(1 << 1)
+#define SPEAR310_SMII2_IRQ_MASK		(1 << 2)
+#define SPEAR310_SMII3_IRQ_MASK		(1 << 3)
+#define SPEAR310_WAKEUP_SMII0_IRQ_MASK	(1 << 4)
+#define SPEAR310_WAKEUP_SMII1_IRQ_MASK	(1 << 5)
+#define SPEAR310_WAKEUP_SMII2_IRQ_MASK	(1 << 6)
+#define SPEAR310_WAKEUP_SMII3_IRQ_MASK	(1 << 7)
+#define SPEAR310_UART1_IRQ_MASK		(1 << 8)
+#define SPEAR310_UART2_IRQ_MASK		(1 << 9)
+#define SPEAR310_UART3_IRQ_MASK		(1 << 10)
+#define SPEAR310_UART4_IRQ_MASK		(1 << 11)
+#define SPEAR310_UART5_IRQ_MASK		(1 << 12)
+#define SPEAR310_EMI_IRQ_MASK		(1 << 13)
+#define SPEAR310_TDM_HDLC_IRQ_MASK	(1 << 14)
+#define SPEAR310_RS485_0_IRQ_MASK	(1 << 15)
+#define SPEAR310_RS485_1_IRQ_MASK	(1 << 16)
+
+#define SPEAR310_SHIRQ_RAS1_MASK	0x000FF
+#define SPEAR310_SHIRQ_RAS2_MASK	0x01F00
+#define SPEAR310_SHIRQ_RAS3_MASK	0x02000
+#define SPEAR310_SHIRQ_INTRCOMM_RAS_MASK	0x1C000
+
+/* SPEAr310 Virtual irq definitions */
+/* IRQs sharing IRQ_GEN_RAS_1 */
+#define SPEAR310_VIRQ_SMII0			(SPEAR3XX_VIRQ_START + 0)
+#define SPEAR310_VIRQ_SMII1			(SPEAR3XX_VIRQ_START + 1)
+#define SPEAR310_VIRQ_SMII2			(SPEAR3XX_VIRQ_START + 2)
+#define SPEAR310_VIRQ_SMII3			(SPEAR3XX_VIRQ_START + 3)
+#define SPEAR310_VIRQ_WAKEUP_SMII0		(SPEAR3XX_VIRQ_START + 4)
+#define SPEAR310_VIRQ_WAKEUP_SMII1		(SPEAR3XX_VIRQ_START + 5)
+#define SPEAR310_VIRQ_WAKEUP_SMII2		(SPEAR3XX_VIRQ_START + 6)
+#define SPEAR310_VIRQ_WAKEUP_SMII3		(SPEAR3XX_VIRQ_START + 7)
+
+/* IRQs sharing IRQ_GEN_RAS_2 */
+#define SPEAR310_VIRQ_UART1			(SPEAR3XX_VIRQ_START + 8)
+#define SPEAR310_VIRQ_UART2			(SPEAR3XX_VIRQ_START + 9)
+#define SPEAR310_VIRQ_UART3			(SPEAR3XX_VIRQ_START + 10)
+#define SPEAR310_VIRQ_UART4			(SPEAR3XX_VIRQ_START + 11)
+#define SPEAR310_VIRQ_UART5			(SPEAR3XX_VIRQ_START + 12)
+
+/* IRQs sharing IRQ_GEN_RAS_3 */
+#define SPEAR310_VIRQ_EMI			(SPEAR3XX_VIRQ_START + 13)
+#define SPEAR310_VIRQ_PLGPIO			(SPEAR3XX_VIRQ_START + 14)
+
+/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
+#define SPEAR310_VIRQ_TDM_HDLC			(SPEAR3XX_VIRQ_START + 15)
+#define SPEAR310_VIRQ_RS485_0			(SPEAR3XX_VIRQ_START + 16)
+#define SPEAR310_VIRQ_RS485_1			(SPEAR3XX_VIRQ_START + 17)
 
-/* pmx driver structure */
-static struct pmx_driver pmx_driver = {
-	.mux_reg = {.offset = PAD_MUX_CONFIG_REG, .mask = 0x00007fff},
-};
 
 /* spear3xx shared irq */
 static struct shirq_dev_config shirq_ras1_config[] = {
@@ -255,17 +198,247 @@ static struct spear_shirq shirq_intrcomm_ras = {
 	},
 };
 
-/* Add spear310 specific devices here */
+/* DMAC platform data's slave info */
+struct pl08x_channel_data spear310_dma_info[] = {
+	{
+		.bus_id = "uart0_rx",
+		.min_signal = 2,
+		.max_signal = 2,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart0_tx",
+		.min_signal = 3,
+		.max_signal = 3,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ssp0_rx",
+		.min_signal = 8,
+		.max_signal = 8,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ssp0_tx",
+		.min_signal = 9,
+		.max_signal = 9,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "i2c_rx",
+		.min_signal = 10,
+		.max_signal = 10,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "i2c_tx",
+		.min_signal = 11,
+		.max_signal = 11,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "irda",
+		.min_signal = 12,
+		.max_signal = 12,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "adc",
+		.min_signal = 13,
+		.max_signal = 13,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "to_jpeg",
+		.min_signal = 14,
+		.max_signal = 14,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "from_jpeg",
+		.min_signal = 15,
+		.max_signal = 15,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart1_rx",
+		.min_signal = 0,
+		.max_signal = 0,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart1_tx",
+		.min_signal = 1,
+		.max_signal = 1,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart2_rx",
+		.min_signal = 2,
+		.max_signal = 2,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart2_tx",
+		.min_signal = 3,
+		.max_signal = 3,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart3_rx",
+		.min_signal = 4,
+		.max_signal = 4,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart3_tx",
+		.min_signal = 5,
+		.max_signal = 5,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart4_rx",
+		.min_signal = 6,
+		.max_signal = 6,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart4_tx",
+		.min_signal = 7,
+		.max_signal = 7,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart5_rx",
+		.min_signal = 8,
+		.max_signal = 8,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart5_tx",
+		.min_signal = 9,
+		.max_signal = 9,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras5_rx",
+		.min_signal = 10,
+		.max_signal = 10,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras5_tx",
+		.min_signal = 11,
+		.max_signal = 11,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras6_rx",
+		.min_signal = 12,
+		.max_signal = 12,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras6_tx",
+		.min_signal = 13,
+		.max_signal = 13,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras7_rx",
+		.min_signal = 14,
+		.max_signal = 14,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras7_tx",
+		.min_signal = 15,
+		.max_signal = 15,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	},
+};
 
-/* spear310 routines */
-void __init spear310_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
-		u8 pmx_dev_count)
+/* uart devices plat data */
+static struct amba_pl011_data spear310_uart_data[] = {
+	{
+		.dma_filter = pl08x_filter_id,
+		.dma_tx_param = "uart1_tx",
+		.dma_rx_param = "uart1_rx",
+	}, {
+		.dma_filter = pl08x_filter_id,
+		.dma_tx_param = "uart2_tx",
+		.dma_rx_param = "uart2_rx",
+	}, {
+		.dma_filter = pl08x_filter_id,
+		.dma_tx_param = "uart3_tx",
+		.dma_rx_param = "uart3_rx",
+	}, {
+		.dma_filter = pl08x_filter_id,
+		.dma_tx_param = "uart4_tx",
+		.dma_rx_param = "uart4_rx",
+	}, {
+		.dma_filter = pl08x_filter_id,
+		.dma_tx_param = "uart5_tx",
+		.dma_rx_param = "uart5_rx",
+	},
+};
+
+/* Add SPEAr310 auxdata to pass platform data */
+static struct of_dev_auxdata spear310_auxdata_lookup[] __initdata = {
+	OF_DEV_AUXDATA("arm,pl022", SPEAR3XX_ICM1_SSP_BASE, NULL,
+			&pl022_plat_data),
+	OF_DEV_AUXDATA("arm,pl080", SPEAR3XX_ICM3_DMA_BASE, NULL,
+			&pl080_plat_data),
+	OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART1_BASE, NULL,
+			&spear310_uart_data[0]),
+	OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART2_BASE, NULL,
+			&spear310_uart_data[1]),
+	OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART3_BASE, NULL,
+			&spear310_uart_data[2]),
+	OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART4_BASE, NULL,
+			&spear310_uart_data[3]),
+	OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART5_BASE, NULL,
+			&spear310_uart_data[4]),
+	{}
+};
+
+static void __init spear310_dt_init(void)
 {
 	void __iomem *base;
-	int ret = 0;
+	int ret;
 
-	/* call spear3xx family common init function */
-	spear3xx_init();
+	pl080_plat_data.slave_channels = spear310_dma_info;
+	pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear310_dma_info);
+
+	of_platform_populate(NULL, of_default_bus_match_table,
+			spear310_auxdata_lookup, NULL);
 
 	/* shared irq registration */
 	base = ioremap(SPEAR310_SOC_CONFIG_BASE, SZ_4K);
@@ -274,35 +447,45 @@ void __init spear310_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
 		shirq_ras1.regs.base = base;
 		ret = spear_shirq_register(&shirq_ras1);
 		if (ret)
-			printk(KERN_ERR "Error registering Shared IRQ 1\n");
+			pr_err("Error registering Shared IRQ 1\n");
 
 		/* shirq 2 */
 		shirq_ras2.regs.base = base;
 		ret = spear_shirq_register(&shirq_ras2);
 		if (ret)
-			printk(KERN_ERR "Error registering Shared IRQ 2\n");
+			pr_err("Error registering Shared IRQ 2\n");
 
 		/* shirq 3 */
 		shirq_ras3.regs.base = base;
 		ret = spear_shirq_register(&shirq_ras3);
 		if (ret)
-			printk(KERN_ERR "Error registering Shared IRQ 3\n");
+			pr_err("Error registering Shared IRQ 3\n");
 
 		/* shirq 4 */
 		shirq_intrcomm_ras.regs.base = base;
 		ret = spear_shirq_register(&shirq_intrcomm_ras);
 		if (ret)
-			printk(KERN_ERR "Error registering Shared IRQ 4\n");
+			pr_err("Error registering Shared IRQ 4\n");
 	}
+}
 
-	/* pmx initialization */
-	pmx_driver.base = base;
-	pmx_driver.mode = pmx_mode;
-	pmx_driver.devs = pmx_devs;
-	pmx_driver.devs_count = pmx_dev_count;
+static const char * const spear310_dt_board_compat[] = {
+	"st,spear310",
+	"st,spear310-evb",
+	NULL,
+};
 
-	ret = pmx_register(&pmx_driver);
-	if (ret)
-		printk(KERN_ERR "padmux: registration failed. err no: %d\n",
-				ret);
+static void __init spear310_map_io(void)
+{
+	spear3xx_map_io();
 }
+
+DT_MACHINE_START(SPEAR310_DT, "ST SPEAr310 SoC with Flattened Device Tree")
+	.map_io		=	spear310_map_io,
+	.init_irq	=	spear3xx_dt_init_irq,
+	.handle_irq	=	vic_handle_irq,
+	.timer		=	&spear3xx_timer,
+	.init_machine	=	spear310_dt_init,
+	.restart	=	spear_restart,
+	.dt_compat	=	spear310_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-spear3xx/spear310_evb.c b/arch/arm/mach-spear3xx/spear310_evb.c
deleted file mode 100644
index f92c4993f65a..000000000000
--- a/arch/arm/mach-spear3xx/spear310_evb.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/spear310_evb.c
- *
- * SPEAr310 evaluation board source file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/hardware/vic.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-#include <mach/generic.h>
-#include <mach/hardware.h>
-
-/* padmux devices to enable */
-static struct pmx_dev *pmx_devs[] = {
-	/* spear3xx specific devices */
-	&spear3xx_pmx_i2c,
-	&spear3xx_pmx_ssp,
-	&spear3xx_pmx_gpio_pin0,
-	&spear3xx_pmx_gpio_pin1,
-	&spear3xx_pmx_gpio_pin2,
-	&spear3xx_pmx_gpio_pin3,
-	&spear3xx_pmx_gpio_pin4,
-	&spear3xx_pmx_gpio_pin5,
-	&spear3xx_pmx_uart0,
-
-	/* spear310 specific devices */
-	&spear310_pmx_emi_cs_0_1_4_5,
-	&spear310_pmx_emi_cs_2_3,
-	&spear310_pmx_uart1,
-	&spear310_pmx_uart2,
-	&spear310_pmx_uart3_4_5,
-	&spear310_pmx_fsmc,
-	&spear310_pmx_rs485_0_1,
-	&spear310_pmx_tdm0,
-};
-
-static struct amba_device *amba_devs[] __initdata = {
-	/* spear3xx specific devices */
-	&spear3xx_gpio_device,
-	&spear3xx_uart_device,
-
-	/* spear310 specific devices */
-};
-
-static struct platform_device *plat_devs[] __initdata = {
-	/* spear3xx specific devices */
-
-	/* spear310 specific devices */
-};
-
-static void __init spear310_evb_init(void)
-{
-	unsigned int i;
-
-	/* call spear310 machine init function */
-	spear310_init(NULL, pmx_devs, ARRAY_SIZE(pmx_devs));
-
-	/* Add Platform Devices */
-	platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));
-
-	/* Add Amba Devices */
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
-		amba_device_register(amba_devs[i], &iomem_resource);
-}
-
-MACHINE_START(SPEAR310, "ST-SPEAR310-EVB")
-	.atag_offset	=	0x100,
-	.map_io		=	spear3xx_map_io,
-	.init_irq	=	spear3xx_init_irq,
-	.handle_irq	=	vic_handle_irq,
-	.timer		=	&spear3xx_timer,
-	.init_machine	=	spear310_evb_init,
-	.restart	=	spear_restart,
-MACHINE_END
diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c
index deaaf199612c..a88fa841d29d 100644
--- a/arch/arm/mach-spear3xx/spear320.c
+++ b/arch/arm/mach-spear3xx/spear320.c
@@ -3,386 +3,84 @@
  *
  * SPEAr320 machine source file
  *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Copyright (C) 2009-2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
 
-#include <linux/ptrace.h>
-#include <asm/irq.h>
+#define pr_fmt(fmt) "SPEAr320: " fmt
+
+#include <linux/amba/pl022.h>
+#include <linux/amba/pl08x.h>
+#include <linux/amba/serial.h>
+#include <linux/of_platform.h>
+#include <asm/hardware/vic.h>
+#include <asm/mach/arch.h>
 #include <plat/shirq.h>
 #include <mach/generic.h>
-#include <mach/hardware.h>
-
-/* pad multiplexing support */
-/* muxing registers */
-#define PAD_MUX_CONFIG_REG	0x0C
-#define MODE_CONFIG_REG		0x10
-
-/* modes */
-#define AUTO_NET_SMII_MODE	(1 << 0)
-#define AUTO_NET_MII_MODE	(1 << 1)
-#define AUTO_EXP_MODE		(1 << 2)
-#define SMALL_PRINTERS_MODE	(1 << 3)
-#define ALL_MODES		0xF
-
-struct pmx_mode spear320_auto_net_smii_mode = {
-	.id = AUTO_NET_SMII_MODE,
-	.name = "Automation Networking SMII Mode",
-	.mask = 0x00,
-};
-
-struct pmx_mode spear320_auto_net_mii_mode = {
-	.id = AUTO_NET_MII_MODE,
-	.name = "Automation Networking MII Mode",
-	.mask = 0x01,
-};
-
-struct pmx_mode spear320_auto_exp_mode = {
-	.id = AUTO_EXP_MODE,
-	.name = "Automation Expanded Mode",
-	.mask = 0x02,
-};
-
-struct pmx_mode spear320_small_printers_mode = {
-	.id = SMALL_PRINTERS_MODE,
-	.name = "Small Printers Mode",
-	.mask = 0x03,
-};
-
-/* devices */
-static struct pmx_dev_mode pmx_clcd_modes[] = {
-	{
-		.ids = AUTO_NET_SMII_MODE,
-		.mask = 0x0,
-	},
-};
-
-struct pmx_dev spear320_pmx_clcd = {
-	.name = "clcd",
-	.modes = pmx_clcd_modes,
-	.mode_count = ARRAY_SIZE(pmx_clcd_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_emi_modes[] = {
-	{
-		.ids = AUTO_EXP_MODE,
-		.mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK,
-	},
-};
-
-struct pmx_dev spear320_pmx_emi = {
-	.name = "emi",
-	.modes = pmx_emi_modes,
-	.mode_count = ARRAY_SIZE(pmx_emi_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_fsmc_modes[] = {
-	{
-		.ids = ALL_MODES,
-		.mask = 0x0,
-	},
-};
-
-struct pmx_dev spear320_pmx_fsmc = {
-	.name = "fsmc",
-	.modes = pmx_fsmc_modes,
-	.mode_count = ARRAY_SIZE(pmx_fsmc_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_spp_modes[] = {
-	{
-		.ids = SMALL_PRINTERS_MODE,
-		.mask = 0x0,
-	},
-};
-
-struct pmx_dev spear320_pmx_spp = {
-	.name = "spp",
-	.modes = pmx_spp_modes,
-	.mode_count = ARRAY_SIZE(pmx_spp_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_sdhci_modes[] = {
-	{
-		.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE |
-			SMALL_PRINTERS_MODE,
-		.mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK,
-	},
-};
-
-struct pmx_dev spear320_pmx_sdhci = {
-	.name = "sdhci",
-	.modes = pmx_sdhci_modes,
-	.mode_count = ARRAY_SIZE(pmx_sdhci_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_i2s_modes[] = {
-	{
-		.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE,
-		.mask = PMX_UART0_MODEM_MASK,
-	},
-};
-
-struct pmx_dev spear320_pmx_i2s = {
-	.name = "i2s",
-	.modes = pmx_i2s_modes,
-	.mode_count = ARRAY_SIZE(pmx_i2s_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_uart1_modes[] = {
-	{
-		.ids = ALL_MODES,
-		.mask = PMX_GPIO_PIN0_MASK | PMX_GPIO_PIN1_MASK,
-	},
-};
-
-struct pmx_dev spear320_pmx_uart1 = {
-	.name = "uart1",
-	.modes = pmx_uart1_modes,
-	.mode_count = ARRAY_SIZE(pmx_uart1_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_uart1_modem_modes[] = {
-	{
-		.ids = AUTO_EXP_MODE,
-		.mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK |
-			PMX_SSP_CS_MASK,
-	}, {
-		.ids = SMALL_PRINTERS_MODE,
-		.mask = PMX_GPIO_PIN3_MASK | PMX_GPIO_PIN4_MASK |
-			PMX_GPIO_PIN5_MASK | PMX_SSP_CS_MASK,
-	},
-};
-
-struct pmx_dev spear320_pmx_uart1_modem = {
-	.name = "uart1_modem",
-	.modes = pmx_uart1_modem_modes,
-	.mode_count = ARRAY_SIZE(pmx_uart1_modem_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_uart2_modes[] = {
-	{
-		.ids = ALL_MODES,
-		.mask = PMX_FIRDA_MASK,
-	},
-};
-
-struct pmx_dev spear320_pmx_uart2 = {
-	.name = "uart2",
-	.modes = pmx_uart2_modes,
-	.mode_count = ARRAY_SIZE(pmx_uart2_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_touchscreen_modes[] = {
-	{
-		.ids = AUTO_NET_SMII_MODE,
-		.mask = PMX_SSP_CS_MASK,
-	},
-};
-
-struct pmx_dev spear320_pmx_touchscreen = {
-	.name = "touchscreen",
-	.modes = pmx_touchscreen_modes,
-	.mode_count = ARRAY_SIZE(pmx_touchscreen_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_can_modes[] = {
-	{
-		.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE | AUTO_EXP_MODE,
-		.mask = PMX_GPIO_PIN2_MASK | PMX_GPIO_PIN3_MASK |
-			PMX_GPIO_PIN4_MASK | PMX_GPIO_PIN5_MASK,
-	},
-};
-
-struct pmx_dev spear320_pmx_can = {
-	.name = "can",
-	.modes = pmx_can_modes,
-	.mode_count = ARRAY_SIZE(pmx_can_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_sdhci_led_modes[] = {
-	{
-		.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE,
-		.mask = PMX_SSP_CS_MASK,
-	},
-};
-
-struct pmx_dev spear320_pmx_sdhci_led = {
-	.name = "sdhci_led",
-	.modes = pmx_sdhci_led_modes,
-	.mode_count = ARRAY_SIZE(pmx_sdhci_led_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_pwm0_modes[] = {
-	{
-		.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE,
-		.mask = PMX_UART0_MODEM_MASK,
-	}, {
-		.ids = AUTO_EXP_MODE | SMALL_PRINTERS_MODE,
-		.mask = PMX_MII_MASK,
-	},
-};
-
-struct pmx_dev spear320_pmx_pwm0 = {
-	.name = "pwm0",
-	.modes = pmx_pwm0_modes,
-	.mode_count = ARRAY_SIZE(pmx_pwm0_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_pwm1_modes[] = {
-	{
-		.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE,
-		.mask = PMX_UART0_MODEM_MASK,
-	}, {
-		.ids = AUTO_EXP_MODE | SMALL_PRINTERS_MODE,
-		.mask = PMX_MII_MASK,
-	},
-};
-
-struct pmx_dev spear320_pmx_pwm1 = {
-	.name = "pwm1",
-	.modes = pmx_pwm1_modes,
-	.mode_count = ARRAY_SIZE(pmx_pwm1_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_pwm2_modes[] = {
-	{
-		.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE,
-		.mask = PMX_SSP_CS_MASK,
-	}, {
-		.ids = AUTO_EXP_MODE | SMALL_PRINTERS_MODE,
-		.mask = PMX_MII_MASK,
-	},
-};
-
-struct pmx_dev spear320_pmx_pwm2 = {
-	.name = "pwm2",
-	.modes = pmx_pwm2_modes,
-	.mode_count = ARRAY_SIZE(pmx_pwm2_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_pwm3_modes[] = {
-	{
-		.ids = AUTO_EXP_MODE | SMALL_PRINTERS_MODE | AUTO_NET_SMII_MODE,
-		.mask = PMX_MII_MASK,
-	},
-};
-
-struct pmx_dev spear320_pmx_pwm3 = {
-	.name = "pwm3",
-	.modes = pmx_pwm3_modes,
-	.mode_count = ARRAY_SIZE(pmx_pwm3_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_ssp1_modes[] = {
-	{
-		.ids = SMALL_PRINTERS_MODE | AUTO_NET_SMII_MODE,
-		.mask = PMX_MII_MASK,
-	},
-};
-
-struct pmx_dev spear320_pmx_ssp1 = {
-	.name = "ssp1",
-	.modes = pmx_ssp1_modes,
-	.mode_count = ARRAY_SIZE(pmx_ssp1_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_ssp2_modes[] = {
-	{
-		.ids = AUTO_NET_SMII_MODE,
-		.mask = PMX_MII_MASK,
-	},
-};
-
-struct pmx_dev spear320_pmx_ssp2 = {
-	.name = "ssp2",
-	.modes = pmx_ssp2_modes,
-	.mode_count = ARRAY_SIZE(pmx_ssp2_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_mii1_modes[] = {
-	{
-		.ids = AUTO_NET_MII_MODE,
-		.mask = 0x0,
-	},
-};
-
-struct pmx_dev spear320_pmx_mii1 = {
-	.name = "mii1",
-	.modes = pmx_mii1_modes,
-	.mode_count = ARRAY_SIZE(pmx_mii1_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_smii0_modes[] = {
-	{
-		.ids = AUTO_NET_SMII_MODE | AUTO_EXP_MODE | SMALL_PRINTERS_MODE,
-		.mask = PMX_MII_MASK,
-	},
-};
-
-struct pmx_dev spear320_pmx_smii0 = {
-	.name = "smii0",
-	.modes = pmx_smii0_modes,
-	.mode_count = ARRAY_SIZE(pmx_smii0_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_smii1_modes[] = {
-	{
-		.ids = AUTO_NET_SMII_MODE | SMALL_PRINTERS_MODE,
-		.mask = PMX_MII_MASK,
-	},
-};
-
-struct pmx_dev spear320_pmx_smii1 = {
-	.name = "smii1",
-	.modes = pmx_smii1_modes,
-	.mode_count = ARRAY_SIZE(pmx_smii1_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_i2c1_modes[] = {
-	{
-		.ids = AUTO_EXP_MODE,
-		.mask = 0x0,
-	},
-};
-
-struct pmx_dev spear320_pmx_i2c1 = {
-	.name = "i2c1",
-	.modes = pmx_i2c1_modes,
-	.mode_count = ARRAY_SIZE(pmx_i2c1_modes),
-	.enb_on_reset = 1,
-};
-
-/* pmx driver structure */
-static struct pmx_driver pmx_driver = {
-	.mode_reg = {.offset = MODE_CONFIG_REG, .mask = 0x00000007},
-	.mux_reg = {.offset = PAD_MUX_CONFIG_REG, .mask = 0x00007fff},
-};
+#include <mach/spear.h>
+
+#define SPEAR320_UART1_BASE		UL(0xA3000000)
+#define SPEAR320_UART2_BASE		UL(0xA4000000)
+#define SPEAR320_SSP0_BASE		UL(0xA5000000)
+#define SPEAR320_SSP1_BASE		UL(0xA6000000)
+
+/* Interrupt registers offsets and masks */
+#define SPEAR320_INT_STS_MASK_REG		0x04
+#define SPEAR320_INT_CLR_MASK_REG		0x04
+#define SPEAR320_INT_ENB_MASK_REG		0x08
+#define SPEAR320_GPIO_IRQ_MASK			(1 << 0)
+#define SPEAR320_I2S_PLAY_IRQ_MASK		(1 << 1)
+#define SPEAR320_I2S_REC_IRQ_MASK		(1 << 2)
+#define SPEAR320_EMI_IRQ_MASK			(1 << 7)
+#define SPEAR320_CLCD_IRQ_MASK			(1 << 8)
+#define SPEAR320_SPP_IRQ_MASK			(1 << 9)
+#define SPEAR320_SDHCI_IRQ_MASK			(1 << 10)
+#define SPEAR320_CAN_U_IRQ_MASK			(1 << 11)
+#define SPEAR320_CAN_L_IRQ_MASK			(1 << 12)
+#define SPEAR320_UART1_IRQ_MASK			(1 << 13)
+#define SPEAR320_UART2_IRQ_MASK			(1 << 14)
+#define SPEAR320_SSP1_IRQ_MASK			(1 << 15)
+#define SPEAR320_SSP2_IRQ_MASK			(1 << 16)
+#define SPEAR320_SMII0_IRQ_MASK			(1 << 17)
+#define SPEAR320_MII1_SMII1_IRQ_MASK		(1 << 18)
+#define SPEAR320_WAKEUP_SMII0_IRQ_MASK		(1 << 19)
+#define SPEAR320_WAKEUP_MII1_SMII1_IRQ_MASK	(1 << 20)
+#define SPEAR320_I2C1_IRQ_MASK			(1 << 21)
+
+#define SPEAR320_SHIRQ_RAS1_MASK		0x000380
+#define SPEAR320_SHIRQ_RAS3_MASK		0x000007
+#define SPEAR320_SHIRQ_INTRCOMM_RAS_MASK	0x3FF800
+
+/* SPEAr320 Virtual irq definitions */
+/* IRQs sharing IRQ_GEN_RAS_1 */
+#define SPEAR320_VIRQ_EMI			(SPEAR3XX_VIRQ_START + 0)
+#define SPEAR320_VIRQ_CLCD			(SPEAR3XX_VIRQ_START + 1)
+#define SPEAR320_VIRQ_SPP			(SPEAR3XX_VIRQ_START + 2)
+
+/* IRQs sharing IRQ_GEN_RAS_2 */
+#define SPEAR320_IRQ_SDHCI			SPEAR3XX_IRQ_GEN_RAS_2
+
+/* IRQs sharing IRQ_GEN_RAS_3 */
+#define SPEAR320_VIRQ_PLGPIO			(SPEAR3XX_VIRQ_START + 3)
+#define SPEAR320_VIRQ_I2S_PLAY			(SPEAR3XX_VIRQ_START + 4)
+#define SPEAR320_VIRQ_I2S_REC			(SPEAR3XX_VIRQ_START + 5)
+
+/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
+#define SPEAR320_VIRQ_CANU			(SPEAR3XX_VIRQ_START + 6)
+#define SPEAR320_VIRQ_CANL			(SPEAR3XX_VIRQ_START + 7)
+#define SPEAR320_VIRQ_UART1			(SPEAR3XX_VIRQ_START + 8)
+#define SPEAR320_VIRQ_UART2			(SPEAR3XX_VIRQ_START + 9)
+#define SPEAR320_VIRQ_SSP1			(SPEAR3XX_VIRQ_START + 10)
+#define SPEAR320_VIRQ_SSP2			(SPEAR3XX_VIRQ_START + 11)
+#define SPEAR320_VIRQ_SMII0			(SPEAR3XX_VIRQ_START + 12)
+#define SPEAR320_VIRQ_MII1_SMII1		(SPEAR3XX_VIRQ_START + 13)
+#define SPEAR320_VIRQ_WAKEUP_SMII0		(SPEAR3XX_VIRQ_START + 14)
+#define SPEAR320_VIRQ_WAKEUP_MII1_SMII1		(SPEAR3XX_VIRQ_START + 15)
+#define SPEAR320_VIRQ_I2C1			(SPEAR3XX_VIRQ_START + 16)
 
 /* spear3xx shared irq */
 static struct shirq_dev_config shirq_ras1_config[] = {
@@ -508,17 +206,250 @@ static struct spear_shirq shirq_intrcomm_ras = {
 	},
 };
 
-/* Add spear320 specific devices here */
+/* DMAC platform data's slave info */
+struct pl08x_channel_data spear320_dma_info[] = {
+	{
+		.bus_id = "uart0_rx",
+		.min_signal = 2,
+		.max_signal = 2,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart0_tx",
+		.min_signal = 3,
+		.max_signal = 3,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ssp0_rx",
+		.min_signal = 8,
+		.max_signal = 8,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ssp0_tx",
+		.min_signal = 9,
+		.max_signal = 9,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "i2c0_rx",
+		.min_signal = 10,
+		.max_signal = 10,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "i2c0_tx",
+		.min_signal = 11,
+		.max_signal = 11,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "irda",
+		.min_signal = 12,
+		.max_signal = 12,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "adc",
+		.min_signal = 13,
+		.max_signal = 13,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "to_jpeg",
+		.min_signal = 14,
+		.max_signal = 14,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "from_jpeg",
+		.min_signal = 15,
+		.max_signal = 15,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ssp1_rx",
+		.min_signal = 0,
+		.max_signal = 0,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ssp1_tx",
+		.min_signal = 1,
+		.max_signal = 1,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ssp2_rx",
+		.min_signal = 2,
+		.max_signal = 2,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ssp2_tx",
+		.min_signal = 3,
+		.max_signal = 3,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart1_rx",
+		.min_signal = 4,
+		.max_signal = 4,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart1_tx",
+		.min_signal = 5,
+		.max_signal = 5,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart2_rx",
+		.min_signal = 6,
+		.max_signal = 6,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart2_tx",
+		.min_signal = 7,
+		.max_signal = 7,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2c1_rx",
+		.min_signal = 8,
+		.max_signal = 8,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2c1_tx",
+		.min_signal = 9,
+		.max_signal = 9,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2c2_rx",
+		.min_signal = 10,
+		.max_signal = 10,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2c2_tx",
+		.min_signal = 11,
+		.max_signal = 11,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2s_rx",
+		.min_signal = 12,
+		.max_signal = 12,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2s_tx",
+		.min_signal = 13,
+		.max_signal = 13,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "rs485_rx",
+		.min_signal = 14,
+		.max_signal = 14,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "rs485_tx",
+		.min_signal = 15,
+		.max_signal = 15,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	},
+};
+
+static struct pl022_ssp_controller spear320_ssp_data[] = {
+	{
+		.bus_id = 1,
+		.enable_dma = 1,
+		.dma_filter = pl08x_filter_id,
+		.dma_tx_param = "ssp1_tx",
+		.dma_rx_param = "ssp1_rx",
+		.num_chipselect = 2,
+	}, {
+		.bus_id = 2,
+		.enable_dma = 1,
+		.dma_filter = pl08x_filter_id,
+		.dma_tx_param = "ssp2_tx",
+		.dma_rx_param = "ssp2_rx",
+		.num_chipselect = 2,
+	}
+};
+
+static struct amba_pl011_data spear320_uart_data[] = {
+	{
+		.dma_filter = pl08x_filter_id,
+		.dma_tx_param = "uart1_tx",
+		.dma_rx_param = "uart1_rx",
+	}, {
+		.dma_filter = pl08x_filter_id,
+		.dma_tx_param = "uart2_tx",
+		.dma_rx_param = "uart2_rx",
+	},
+};
 
-/* spear320 routines */
-void __init spear320_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
-		u8 pmx_dev_count)
+/* Add SPEAr310 auxdata to pass platform data */
+static struct of_dev_auxdata spear320_auxdata_lookup[] __initdata = {
+	OF_DEV_AUXDATA("arm,pl022", SPEAR3XX_ICM1_SSP_BASE, NULL,
+			&pl022_plat_data),
+	OF_DEV_AUXDATA("arm,pl080", SPEAR3XX_ICM3_DMA_BASE, NULL,
+			&pl080_plat_data),
+	OF_DEV_AUXDATA("arm,pl022", SPEAR320_SSP0_BASE, NULL,
+			&spear320_ssp_data[0]),
+	OF_DEV_AUXDATA("arm,pl022", SPEAR320_SSP1_BASE, NULL,
+			&spear320_ssp_data[1]),
+	OF_DEV_AUXDATA("arm,pl011", SPEAR320_UART1_BASE, NULL,
+			&spear320_uart_data[0]),
+	OF_DEV_AUXDATA("arm,pl011", SPEAR320_UART2_BASE, NULL,
+			&spear320_uart_data[1]),
+	{}
+};
+
+static void __init spear320_dt_init(void)
 {
 	void __iomem *base;
-	int ret = 0;
+	int ret;
 
-	/* call spear3xx family common init function */
-	spear3xx_init();
+	pl080_plat_data.slave_channels = spear320_dma_info;
+	pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear320_dma_info);
+
+	of_platform_populate(NULL, of_default_bus_match_table,
+			spear320_auxdata_lookup, NULL);
 
 	/* shared irq registration */
 	base = ioremap(SPEAR320_SOC_CONFIG_BASE, SZ_4K);
@@ -527,29 +458,49 @@ void __init spear320_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
 		shirq_ras1.regs.base = base;
 		ret = spear_shirq_register(&shirq_ras1);
 		if (ret)
-			printk(KERN_ERR "Error registering Shared IRQ 1\n");
+			pr_err("Error registering Shared IRQ 1\n");
 
 		/* shirq 3 */
 		shirq_ras3.regs.base = base;
 		ret = spear_shirq_register(&shirq_ras3);
 		if (ret)
-			printk(KERN_ERR "Error registering Shared IRQ 3\n");
+			pr_err("Error registering Shared IRQ 3\n");
 
 		/* shirq 4 */
 		shirq_intrcomm_ras.regs.base = base;
 		ret = spear_shirq_register(&shirq_intrcomm_ras);
 		if (ret)
-			printk(KERN_ERR "Error registering Shared IRQ 4\n");
+			pr_err("Error registering Shared IRQ 4\n");
 	}
+}
+
+static const char * const spear320_dt_board_compat[] = {
+	"st,spear320",
+	"st,spear320-evb",
+	NULL,
+};
 
-	/* pmx initialization */
-	pmx_driver.base = base;
-	pmx_driver.mode = pmx_mode;
-	pmx_driver.devs = pmx_devs;
-	pmx_driver.devs_count = pmx_dev_count;
+struct map_desc spear320_io_desc[] __initdata = {
+	{
+		.virtual	= VA_SPEAR320_SOC_CONFIG_BASE,
+		.pfn		= __phys_to_pfn(SPEAR320_SOC_CONFIG_BASE),
+		.length		= SZ_16M,
+		.type		= MT_DEVICE
+	},
+};
 
-	ret = pmx_register(&pmx_driver);
-	if (ret)
-		printk(KERN_ERR "padmux: registration failed. err no: %d\n",
-				ret);
+static void __init spear320_map_io(void)
+{
+	iotable_init(spear320_io_desc, ARRAY_SIZE(spear320_io_desc));
+	spear3xx_map_io();
 }
+
+DT_MACHINE_START(SPEAR320_DT, "ST SPEAr320 SoC with Flattened Device Tree")
+	.map_io		=	spear320_map_io,
+	.init_irq	=	spear3xx_dt_init_irq,
+	.handle_irq	=	vic_handle_irq,
+	.timer		=	&spear3xx_timer,
+	.init_machine	=	spear320_dt_init,
+	.restart	=	spear_restart,
+	.dt_compat	=	spear320_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-spear3xx/spear320_evb.c b/arch/arm/mach-spear3xx/spear320_evb.c
deleted file mode 100644
index 105334ab7021..000000000000
--- a/arch/arm/mach-spear3xx/spear320_evb.c
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/spear320_evb.c
- *
- * SPEAr320 evaluation board source file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/hardware/vic.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-#include <mach/generic.h>
-#include <mach/hardware.h>
-
-/* padmux devices to enable */
-static struct pmx_dev *pmx_devs[] = {
-	/* spear3xx specific devices */
-	&spear3xx_pmx_i2c,
-	&spear3xx_pmx_ssp,
-	&spear3xx_pmx_mii,
-	&spear3xx_pmx_uart0,
-
-	/* spear320 specific devices */
-	&spear320_pmx_fsmc,
-	&spear320_pmx_sdhci,
-	&spear320_pmx_i2s,
-	&spear320_pmx_uart1,
-	&spear320_pmx_uart2,
-	&spear320_pmx_can,
-	&spear320_pmx_pwm0,
-	&spear320_pmx_pwm1,
-	&spear320_pmx_pwm2,
-	&spear320_pmx_mii1,
-};
-
-static struct amba_device *amba_devs[] __initdata = {
-	/* spear3xx specific devices */
-	&spear3xx_gpio_device,
-	&spear3xx_uart_device,
-
-	/* spear320 specific devices */
-};
-
-static struct platform_device *plat_devs[] __initdata = {
-	/* spear3xx specific devices */
-
-	/* spear320 specific devices */
-};
-
-static void __init spear320_evb_init(void)
-{
-	unsigned int i;
-
-	/* call spear320 machine init function */
-	spear320_init(&spear320_auto_net_mii_mode, pmx_devs,
-			ARRAY_SIZE(pmx_devs));
-
-	/* Add Platform Devices */
-	platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));
-
-	/* Add Amba Devices */
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
-		amba_device_register(amba_devs[i], &iomem_resource);
-}
-
-MACHINE_START(SPEAR320, "ST-SPEAR320-EVB")
-	.atag_offset	=	0x100,
-	.map_io		=	spear3xx_map_io,
-	.init_irq	=	spear3xx_init_irq,
-	.handle_irq	=	vic_handle_irq,
-	.timer		=	&spear3xx_timer,
-	.init_machine	=	spear320_evb_init,
-	.restart	=	spear_restart,
-MACHINE_END
diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c
index b1733c37f209..f22419ed74a8 100644
--- a/arch/arm/mach-spear3xx/spear3xx.c
+++ b/arch/arm/mach-spear3xx/spear3xx.c
@@ -3,71 +3,78 @@
  *
  * SPEAr3XX machines common source file
  *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Copyright (C) 2009-2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
 
-#include <linux/types.h>
-#include <linux/amba/pl061.h>
-#include <linux/ptrace.h>
+#define pr_fmt(fmt) "SPEAr3xx: " fmt
+
+#include <linux/amba/pl022.h>
+#include <linux/amba/pl08x.h>
+#include <linux/of_irq.h>
 #include <linux/io.h>
+#include <asm/hardware/pl080.h>
 #include <asm/hardware/vic.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
+#include <plat/pl080.h>
 #include <mach/generic.h>
-#include <mach/hardware.h>
-
-/* Add spear3xx machines common devices here */
-/* gpio device registration */
-static struct pl061_platform_data gpio_plat_data = {
-	.gpio_base	= 0,
-	.irq_base	= SPEAR3XX_GPIO_INT_BASE,
+#include <mach/spear.h>
+
+/* ssp device registration */
+struct pl022_ssp_controller pl022_plat_data = {
+	.bus_id = 0,
+	.enable_dma = 1,
+	.dma_filter = pl08x_filter_id,
+	.dma_tx_param = "ssp0_tx",
+	.dma_rx_param = "ssp0_rx",
+	/*
+	 * This is number of spi devices that can be connected to spi. There are
+	 * two type of chipselects on which slave devices can work. One is chip
+	 * select provided by spi masters other is controlled through external
+	 * gpio's. We can't use chipselect provided from spi master (because as
+	 * soon as FIFO becomes empty, CS is disabled and transfer ends). So
+	 * this number now depends on number of gpios available for spi. each
+	 * slave on each master requires a separate gpio pin.
+	 */
+	.num_chipselect = 2,
+};
+
+/* dmac device registration */
+struct pl08x_platform_data pl080_plat_data = {
+	.memcpy_channel = {
+		.bus_id = "memcpy",
+		.cctl = (PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT | \
+			PL080_BSIZE_16 << PL080_CONTROL_DB_SIZE_SHIFT | \
+			PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT | \
+			PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT | \
+			PL080_CONTROL_PROT_BUFF | PL080_CONTROL_PROT_CACHE | \
+			PL080_CONTROL_PROT_SYS),
+	},
+	.lli_buses = PL08X_AHB1,
+	.mem_buses = PL08X_AHB1,
+	.get_signal = pl080_get_signal,
+	.put_signal = pl080_put_signal,
 };
 
-AMBA_APB_DEVICE(spear3xx_gpio, "gpio", 0, SPEAR3XX_ICM3_GPIO_BASE,
-	{SPEAR3XX_IRQ_BASIC_GPIO}, &gpio_plat_data);
-
-/* uart device registration */
-AMBA_APB_DEVICE(spear3xx_uart, "uart", 0, SPEAR3XX_ICM1_UART_BASE,
-	{SPEAR3XX_IRQ_UART}, NULL);
-
-/* Do spear3xx familiy common initialization part here */
-void __init spear3xx_init(void)
-{
-	/* nothing to do for now */
-}
-
-/* This will initialize vic */
-void __init spear3xx_init_irq(void)
-{
-	vic_init((void __iomem *)VA_SPEAR3XX_ML1_VIC_BASE, 0, ~0, 0);
-}
-
-/* Following will create static virtual/physical mappings */
+/*
+ * Following will create 16MB static virtual/physical mappings
+ * PHYSICAL		VIRTUAL
+ * 0xD0000000		0xFD000000
+ * 0xFC000000		0xFC000000
+ */
 struct map_desc spear3xx_io_desc[] __initdata = {
 	{
-		.virtual	= VA_SPEAR3XX_ICM1_UART_BASE,
-		.pfn		= __phys_to_pfn(SPEAR3XX_ICM1_UART_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= VA_SPEAR3XX_ML1_VIC_BASE,
-		.pfn		= __phys_to_pfn(SPEAR3XX_ML1_VIC_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= VA_SPEAR3XX_ICM3_SYS_CTRL_BASE,
-		.pfn		= __phys_to_pfn(SPEAR3XX_ICM3_SYS_CTRL_BASE),
-		.length		= SZ_4K,
+		.virtual	= VA_SPEAR3XX_ICM1_2_BASE,
+		.pfn		= __phys_to_pfn(SPEAR3XX_ICM1_2_BASE),
+		.length		= SZ_16M,
 		.type		= MT_DEVICE
 	}, {
-		.virtual	= VA_SPEAR3XX_ICM3_MISC_REG_BASE,
-		.pfn		= __phys_to_pfn(SPEAR3XX_ICM3_MISC_REG_BASE),
-		.length		= SZ_4K,
+		.virtual	= VA_SPEAR3XX_ICM3_SMI_CTRL_BASE,
+		.pfn		= __phys_to_pfn(SPEAR3XX_ICM3_SMI_CTRL_BASE),
+		.length		= SZ_16M,
 		.type		= MT_DEVICE
 	},
 };
@@ -76,441 +83,15 @@ struct map_desc spear3xx_io_desc[] __initdata = {
 void __init spear3xx_map_io(void)
 {
 	iotable_init(spear3xx_io_desc, ARRAY_SIZE(spear3xx_io_desc));
-
-	/* This will initialize clock framework */
-	spear3xx_clk_init();
 }
 
-/* pad multiplexing support */
-/* devices */
-static struct pmx_dev_mode pmx_firda_modes[] = {
-	{
-		.ids = 0xffffffff,
-		.mask = PMX_FIRDA_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_firda = {
-	.name = "firda",
-	.modes = pmx_firda_modes,
-	.mode_count = ARRAY_SIZE(pmx_firda_modes),
-	.enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_i2c_modes[] = {
-	{
-		.ids = 0xffffffff,
-		.mask = PMX_I2C_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_i2c = {
-	.name = "i2c",
-	.modes = pmx_i2c_modes,
-	.mode_count = ARRAY_SIZE(pmx_i2c_modes),
-	.enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_ssp_cs_modes[] = {
-	{
-		.ids = 0xffffffff,
-		.mask = PMX_SSP_CS_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_ssp_cs = {
-	.name = "ssp_chip_selects",
-	.modes = pmx_ssp_cs_modes,
-	.mode_count = ARRAY_SIZE(pmx_ssp_cs_modes),
-	.enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_ssp_modes[] = {
-	{
-		.ids = 0xffffffff,
-		.mask = PMX_SSP_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_ssp = {
-	.name = "ssp",
-	.modes = pmx_ssp_modes,
-	.mode_count = ARRAY_SIZE(pmx_ssp_modes),
-	.enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_mii_modes[] = {
-	{
-		.ids = 0xffffffff,
-		.mask = PMX_MII_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_mii = {
-	.name = "mii",
-	.modes = pmx_mii_modes,
-	.mode_count = ARRAY_SIZE(pmx_mii_modes),
-	.enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_gpio_pin0_modes[] = {
-	{
-		.ids = 0xffffffff,
-		.mask = PMX_GPIO_PIN0_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_gpio_pin0 = {
-	.name = "gpio_pin0",
-	.modes = pmx_gpio_pin0_modes,
-	.mode_count = ARRAY_SIZE(pmx_gpio_pin0_modes),
-	.enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_gpio_pin1_modes[] = {
-	{
-		.ids = 0xffffffff,
-		.mask = PMX_GPIO_PIN1_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_gpio_pin1 = {
-	.name = "gpio_pin1",
-	.modes = pmx_gpio_pin1_modes,
-	.mode_count = ARRAY_SIZE(pmx_gpio_pin1_modes),
-	.enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_gpio_pin2_modes[] = {
-	{
-		.ids = 0xffffffff,
-		.mask = PMX_GPIO_PIN2_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_gpio_pin2 = {
-	.name = "gpio_pin2",
-	.modes = pmx_gpio_pin2_modes,
-	.mode_count = ARRAY_SIZE(pmx_gpio_pin2_modes),
-	.enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_gpio_pin3_modes[] = {
-	{
-		.ids = 0xffffffff,
-		.mask = PMX_GPIO_PIN3_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_gpio_pin3 = {
-	.name = "gpio_pin3",
-	.modes = pmx_gpio_pin3_modes,
-	.mode_count = ARRAY_SIZE(pmx_gpio_pin3_modes),
-	.enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_gpio_pin4_modes[] = {
-	{
-		.ids = 0xffffffff,
-		.mask = PMX_GPIO_PIN4_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_gpio_pin4 = {
-	.name = "gpio_pin4",
-	.modes = pmx_gpio_pin4_modes,
-	.mode_count = ARRAY_SIZE(pmx_gpio_pin4_modes),
-	.enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_gpio_pin5_modes[] = {
-	{
-		.ids = 0xffffffff,
-		.mask = PMX_GPIO_PIN5_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_gpio_pin5 = {
-	.name = "gpio_pin5",
-	.modes = pmx_gpio_pin5_modes,
-	.mode_count = ARRAY_SIZE(pmx_gpio_pin5_modes),
-	.enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_uart0_modem_modes[] = {
-	{
-		.ids = 0xffffffff,
-		.mask = PMX_UART0_MODEM_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_uart0_modem = {
-	.name = "uart0_modem",
-	.modes = pmx_uart0_modem_modes,
-	.mode_count = ARRAY_SIZE(pmx_uart0_modem_modes),
-	.enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_uart0_modes[] = {
-	{
-		.ids = 0xffffffff,
-		.mask = PMX_UART0_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_uart0 = {
-	.name = "uart0",
-	.modes = pmx_uart0_modes,
-	.mode_count = ARRAY_SIZE(pmx_uart0_modes),
-	.enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_timer_3_4_modes[] = {
-	{
-		.ids = 0xffffffff,
-		.mask = PMX_TIMER_3_4_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_timer_3_4 = {
-	.name = "timer_3_4",
-	.modes = pmx_timer_3_4_modes,
-	.mode_count = ARRAY_SIZE(pmx_timer_3_4_modes),
-	.enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_timer_1_2_modes[] = {
-	{
-		.ids = 0xffffffff,
-		.mask = PMX_TIMER_1_2_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_timer_1_2 = {
-	.name = "timer_1_2",
-	.modes = pmx_timer_1_2_modes,
-	.mode_count = ARRAY_SIZE(pmx_timer_1_2_modes),
-	.enb_on_reset = 0,
-};
-
-#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
-/* plgpios devices */
-static struct pmx_dev_mode pmx_plgpio_0_1_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_FIRDA_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_0_1 = {
-	.name = "plgpio 0 and 1",
-	.modes = pmx_plgpio_0_1_modes,
-	.mode_count = ARRAY_SIZE(pmx_plgpio_0_1_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_2_3_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_UART0_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_2_3 = {
-	.name = "plgpio 2 and 3",
-	.modes = pmx_plgpio_2_3_modes,
-	.mode_count = ARRAY_SIZE(pmx_plgpio_2_3_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_4_5_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_I2C_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_4_5 = {
-	.name = "plgpio 4 and 5",
-	.modes = pmx_plgpio_4_5_modes,
-	.mode_count = ARRAY_SIZE(pmx_plgpio_4_5_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_6_9_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_SSP_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_6_9 = {
-	.name = "plgpio 6 to 9",
-	.modes = pmx_plgpio_6_9_modes,
-	.mode_count = ARRAY_SIZE(pmx_plgpio_6_9_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_10_27_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_MII_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_10_27 = {
-	.name = "plgpio 10 to 27",
-	.modes = pmx_plgpio_10_27_modes,
-	.mode_count = ARRAY_SIZE(pmx_plgpio_10_27_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_28_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_GPIO_PIN0_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_28 = {
-	.name = "plgpio 28",
-	.modes = pmx_plgpio_28_modes,
-	.mode_count = ARRAY_SIZE(pmx_plgpio_28_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_29_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_GPIO_PIN1_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_29 = {
-	.name = "plgpio 29",
-	.modes = pmx_plgpio_29_modes,
-	.mode_count = ARRAY_SIZE(pmx_plgpio_29_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_30_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_GPIO_PIN2_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_30 = {
-	.name = "plgpio 30",
-	.modes = pmx_plgpio_30_modes,
-	.mode_count = ARRAY_SIZE(pmx_plgpio_30_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_31_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_GPIO_PIN3_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_31 = {
-	.name = "plgpio 31",
-	.modes = pmx_plgpio_31_modes,
-	.mode_count = ARRAY_SIZE(pmx_plgpio_31_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_32_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_GPIO_PIN4_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_32 = {
-	.name = "plgpio 32",
-	.modes = pmx_plgpio_32_modes,
-	.mode_count = ARRAY_SIZE(pmx_plgpio_32_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_33_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_GPIO_PIN5_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_33 = {
-	.name = "plgpio 33",
-	.modes = pmx_plgpio_33_modes,
-	.mode_count = ARRAY_SIZE(pmx_plgpio_33_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_34_36_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_SSP_CS_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_34_36 = {
-	.name = "plgpio 34 to 36",
-	.modes = pmx_plgpio_34_36_modes,
-	.mode_count = ARRAY_SIZE(pmx_plgpio_34_36_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_37_42_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_UART0_MODEM_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_37_42 = {
-	.name = "plgpio 37 to 42",
-	.modes = pmx_plgpio_37_42_modes,
-	.mode_count = ARRAY_SIZE(pmx_plgpio_37_42_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_43_44_47_48_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_TIMER_1_2_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_43_44_47_48 = {
-	.name = "plgpio 43, 44, 47 and 48",
-	.modes = pmx_plgpio_43_44_47_48_modes,
-	.mode_count = ARRAY_SIZE(pmx_plgpio_43_44_47_48_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_45_46_49_50_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_TIMER_3_4_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_45_46_49_50 = {
-	.name = "plgpio 45, 46, 49 and 50",
-	.modes = pmx_plgpio_45_46_49_50_modes,
-	.mode_count = ARRAY_SIZE(pmx_plgpio_45_46_49_50_modes),
-	.enb_on_reset = 1,
-};
-#endif /* CONFIG_MACH_SPEAR310 || CONFIG_MACH_SPEAR320 */
-
 static void __init spear3xx_timer_init(void)
 {
 	char pclk_name[] = "pll3_48m_clk";
 	struct clk *gpt_clk, *pclk;
 
+	spear3xx_clk_init();
+
 	/* get the system timer clock */
 	gpt_clk = clk_get_sys("gpt0", NULL);
 	if (IS_ERR(gpt_clk)) {
@@ -530,9 +111,19 @@ static void __init spear3xx_timer_init(void)
 	clk_put(gpt_clk);
 	clk_put(pclk);
 
-	spear_setup_timer();
+	spear_setup_of_timer();
 }
 
 struct sys_timer spear3xx_timer = {
 	.init = spear3xx_timer_init,
 };
+
+static const struct of_device_id vic_of_match[] __initconst = {
+	{ .compatible = "arm,pl190-vic", .data = vic_of_init, },
+	{ /* Sentinel */ }
+};
+
+void __init spear3xx_dt_init_irq(void)
+{
+	of_irq_init(vic_of_match);
+}
diff --git a/arch/arm/mach-spear6xx/Kconfig b/arch/arm/mach-spear6xx/Kconfig
index fbe298bd1d92..339f397dea70 100644
--- a/arch/arm/mach-spear6xx/Kconfig
+++ b/arch/arm/mach-spear6xx/Kconfig
@@ -2,21 +2,9 @@
 # SPEAr6XX Machine configuration file
 #
 
-if ARCH_SPEAR6XX
-
-menu "SPEAr6xx Implementations"
-config BOARD_SPEAR600_DT
-	bool "SPEAr600 generic board configured via device-tree"
-	select MACH_SPEAR600
+config MACH_SPEAR600
+	def_bool y
+	depends on ARCH_SPEAR6XX
 	select USE_OF
 	help
 	  Supports ST SPEAr600 boards configured via the device-tree
-
-endmenu
-
-config MACH_SPEAR600
-	bool "SPEAr600"
-	help
-	  Supports ST SPEAr600 Machine
-
-endif #ARCH_SPEAR6XX
diff --git a/arch/arm/mach-spear6xx/Makefile b/arch/arm/mach-spear6xx/Makefile
index 76e5750552fc..898831d93f37 100644
--- a/arch/arm/mach-spear6xx/Makefile
+++ b/arch/arm/mach-spear6xx/Makefile
@@ -3,4 +3,4 @@
 #
 
 # common files
-obj-y	+= clock.o spear6xx.o
+obj-y	+= spear6xx.o
diff --git a/arch/arm/mach-spear6xx/Makefile.boot b/arch/arm/mach-spear6xx/Makefile.boot
index 4674a4c221db..af493da37ab6 100644
--- a/arch/arm/mach-spear6xx/Makefile.boot
+++ b/arch/arm/mach-spear6xx/Makefile.boot
@@ -1,3 +1,5 @@
 zreladdr-y	+= 0x00008000
 params_phys-y	:= 0x00000100
 initrd_phys-y	:= 0x00800000
+
+dtb-$(CONFIG_BOARD_SPEAR600_DT)	+= spear600-evb.dtb
diff --git a/arch/arm/mach-spear6xx/clock.c b/arch/arm/mach-spear6xx/clock.c
deleted file mode 100644
index a86499a8a15f..000000000000
--- a/arch/arm/mach-spear6xx/clock.c
+++ /dev/null
@@ -1,683 +0,0 @@
-/*
- * arch/arm/mach-spear6xx/clock.c
- *
- * SPEAr6xx machines clock framework source file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <plat/clock.h>
-#include <mach/misc_regs.h>
-
-/* root clks */
-/* 32 KHz oscillator clock */
-static struct clk osc_32k_clk = {
-	.flags = ALWAYS_ENABLED,
-	.rate = 32000,
-};
-
-/* 30 MHz oscillator clock */
-static struct clk osc_30m_clk = {
-	.flags = ALWAYS_ENABLED,
-	.rate = 30000000,
-};
-
-/* clock derived from 32 KHz osc clk */
-/* rtc clock */
-static struct clk rtc_clk = {
-	.pclk = &osc_32k_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = RTC_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* clock derived from 30 MHz osc clk */
-/* pll masks structure */
-static struct pll_clk_masks pll1_masks = {
-	.mode_mask = PLL_MODE_MASK,
-	.mode_shift = PLL_MODE_SHIFT,
-	.norm_fdbk_m_mask = PLL_NORM_FDBK_M_MASK,
-	.norm_fdbk_m_shift = PLL_NORM_FDBK_M_SHIFT,
-	.dith_fdbk_m_mask = PLL_DITH_FDBK_M_MASK,
-	.dith_fdbk_m_shift = PLL_DITH_FDBK_M_SHIFT,
-	.div_p_mask = PLL_DIV_P_MASK,
-	.div_p_shift = PLL_DIV_P_SHIFT,
-	.div_n_mask = PLL_DIV_N_MASK,
-	.div_n_shift = PLL_DIV_N_SHIFT,
-};
-
-/* pll1 configuration structure */
-static struct pll_clk_config pll1_config = {
-	.mode_reg = PLL1_CTR,
-	.cfg_reg = PLL1_FRQ,
-	.masks = &pll1_masks,
-};
-
-/* pll rate configuration table, in ascending order of rates */
-struct pll_rate_tbl pll_rtbl[] = {
-	{.mode = 0, .m = 0x85, .n = 0x0C, .p = 0x1}, /* 266 MHz */
-	{.mode = 0, .m = 0xA6, .n = 0x0C, .p = 0x1}, /* 332 MHz */
-};
-
-/* PLL1 clock */
-static struct clk pll1_clk = {
-	.flags = ENABLED_ON_INIT,
-	.pclk = &osc_30m_clk,
-	.en_reg = PLL1_CTR,
-	.en_reg_bit = PLL_ENABLE,
-	.calc_rate = &pll_calc_rate,
-	.recalc = &pll_clk_recalc,
-	.set_rate = &pll_clk_set_rate,
-	.rate_config = {pll_rtbl, ARRAY_SIZE(pll_rtbl), 1},
-	.private_data = &pll1_config,
-};
-
-/* PLL3 48 MHz clock */
-static struct clk pll3_48m_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &osc_30m_clk,
-	.rate = 48000000,
-};
-
-/* watch dog timer clock */
-static struct clk wdt_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &osc_30m_clk,
-	.recalc = &follow_parent,
-};
-
-/* clock derived from pll1 clk */
-/* cpu clock */
-static struct clk cpu_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &pll1_clk,
-	.recalc = &follow_parent,
-};
-
-/* ahb masks structure */
-static struct bus_clk_masks ahb_masks = {
-	.mask = PLL_HCLK_RATIO_MASK,
-	.shift = PLL_HCLK_RATIO_SHIFT,
-};
-
-/* ahb configuration structure */
-static struct bus_clk_config ahb_config = {
-	.reg = CORE_CLK_CFG,
-	.masks = &ahb_masks,
-};
-
-/* ahb rate configuration table, in ascending order of rates */
-struct bus_rate_tbl bus_rtbl[] = {
-	{.div = 3}, /* == parent divided by 4 */
-	{.div = 2}, /* == parent divided by 3 */
-	{.div = 1}, /* == parent divided by 2 */
-	{.div = 0}, /* == parent divided by 1 */
-};
-
-/* ahb clock */
-static struct clk ahb_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &pll1_clk,
-	.calc_rate = &bus_calc_rate,
-	.recalc = &bus_clk_recalc,
-	.set_rate = &bus_clk_set_rate,
-	.rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2},
-	.private_data = &ahb_config,
-};
-
-/* auxiliary synthesizers masks */
-static struct aux_clk_masks aux_masks = {
-	.eq_sel_mask = AUX_EQ_SEL_MASK,
-	.eq_sel_shift = AUX_EQ_SEL_SHIFT,
-	.eq1_mask = AUX_EQ1_SEL,
-	.eq2_mask = AUX_EQ2_SEL,
-	.xscale_sel_mask = AUX_XSCALE_MASK,
-	.xscale_sel_shift = AUX_XSCALE_SHIFT,
-	.yscale_sel_mask = AUX_YSCALE_MASK,
-	.yscale_sel_shift = AUX_YSCALE_SHIFT,
-};
-
-/* uart configurations */
-static struct aux_clk_config uart_synth_config = {
-	.synth_reg = UART_CLK_SYNT,
-	.masks = &aux_masks,
-};
-
-/* aux rate configuration table, in ascending order of rates */
-struct aux_rate_tbl aux_rtbl[] = {
-	/* For PLL1 = 332 MHz */
-	{.xscale = 1, .yscale = 8, .eq = 1}, /* 41.5 MHz */
-	{.xscale = 1, .yscale = 4, .eq = 1}, /* 83 MHz */
-	{.xscale = 1, .yscale = 2, .eq = 1}, /* 166 MHz */
-};
-
-/* uart synth clock */
-static struct clk uart_synth_clk = {
-	.en_reg = UART_CLK_SYNT,
-	.en_reg_bit = AUX_SYNT_ENB,
-	.pclk = &pll1_clk,
-	.calc_rate = &aux_calc_rate,
-	.recalc = &aux_clk_recalc,
-	.set_rate = &aux_clk_set_rate,
-	.rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 2},
-	.private_data = &uart_synth_config,
-};
-
-/* uart parents */
-static struct pclk_info uart_pclk_info[] = {
-	{
-		.pclk = &uart_synth_clk,
-		.pclk_val = AUX_CLK_PLL1_VAL,
-	}, {
-		.pclk = &pll3_48m_clk,
-		.pclk_val = AUX_CLK_PLL3_VAL,
-	},
-};
-
-/* uart parent select structure */
-static struct pclk_sel uart_pclk_sel = {
-	.pclk_info = uart_pclk_info,
-	.pclk_count = ARRAY_SIZE(uart_pclk_info),
-	.pclk_sel_reg = PERIP_CLK_CFG,
-	.pclk_sel_mask = UART_CLK_MASK,
-};
-
-/* uart0 clock */
-static struct clk uart0_clk = {
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = UART0_CLK_ENB,
-	.pclk_sel = &uart_pclk_sel,
-	.pclk_sel_shift = UART_CLK_SHIFT,
-	.recalc = &follow_parent,
-};
-
-/* uart1 clock */
-static struct clk uart1_clk = {
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = UART1_CLK_ENB,
-	.pclk_sel = &uart_pclk_sel,
-	.pclk_sel_shift = UART_CLK_SHIFT,
-	.recalc = &follow_parent,
-};
-
-/* firda configurations */
-static struct aux_clk_config firda_synth_config = {
-	.synth_reg = FIRDA_CLK_SYNT,
-	.masks = &aux_masks,
-};
-
-/* firda synth clock */
-static struct clk firda_synth_clk = {
-	.en_reg = FIRDA_CLK_SYNT,
-	.en_reg_bit = AUX_SYNT_ENB,
-	.pclk = &pll1_clk,
-	.calc_rate = &aux_calc_rate,
-	.recalc = &aux_clk_recalc,
-	.set_rate = &aux_clk_set_rate,
-	.rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 2},
-	.private_data = &firda_synth_config,
-};
-
-/* firda parents */
-static struct pclk_info firda_pclk_info[] = {
-	{
-		.pclk = &firda_synth_clk,
-		.pclk_val = AUX_CLK_PLL1_VAL,
-	}, {
-		.pclk = &pll3_48m_clk,
-		.pclk_val = AUX_CLK_PLL3_VAL,
-	},
-};
-
-/* firda parent select structure */
-static struct pclk_sel firda_pclk_sel = {
-	.pclk_info = firda_pclk_info,
-	.pclk_count = ARRAY_SIZE(firda_pclk_info),
-	.pclk_sel_reg = PERIP_CLK_CFG,
-	.pclk_sel_mask = FIRDA_CLK_MASK,
-};
-
-/* firda clock */
-static struct clk firda_clk = {
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = FIRDA_CLK_ENB,
-	.pclk_sel = &firda_pclk_sel,
-	.pclk_sel_shift = FIRDA_CLK_SHIFT,
-	.recalc = &follow_parent,
-};
-
-/* clcd configurations */
-static struct aux_clk_config clcd_synth_config = {
-	.synth_reg = CLCD_CLK_SYNT,
-	.masks = &aux_masks,
-};
-
-/* firda synth clock */
-static struct clk clcd_synth_clk = {
-	.en_reg = CLCD_CLK_SYNT,
-	.en_reg_bit = AUX_SYNT_ENB,
-	.pclk = &pll1_clk,
-	.calc_rate = &aux_calc_rate,
-	.recalc = &aux_clk_recalc,
-	.set_rate = &aux_clk_set_rate,
-	.rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 2},
-	.private_data = &clcd_synth_config,
-};
-
-/* clcd parents */
-static struct pclk_info clcd_pclk_info[] = {
-	{
-		.pclk = &clcd_synth_clk,
-		.pclk_val = AUX_CLK_PLL1_VAL,
-	}, {
-		.pclk = &pll3_48m_clk,
-		.pclk_val = AUX_CLK_PLL3_VAL,
-	},
-};
-
-/* clcd parent select structure */
-static struct pclk_sel clcd_pclk_sel = {
-	.pclk_info = clcd_pclk_info,
-	.pclk_count = ARRAY_SIZE(clcd_pclk_info),
-	.pclk_sel_reg = PERIP_CLK_CFG,
-	.pclk_sel_mask = CLCD_CLK_MASK,
-};
-
-/* clcd clock */
-static struct clk clcd_clk = {
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = CLCD_CLK_ENB,
-	.pclk_sel = &clcd_pclk_sel,
-	.pclk_sel_shift = CLCD_CLK_SHIFT,
-	.recalc = &follow_parent,
-};
-
-/* gpt synthesizer masks */
-static struct gpt_clk_masks gpt_masks = {
-	.mscale_sel_mask = GPT_MSCALE_MASK,
-	.mscale_sel_shift = GPT_MSCALE_SHIFT,
-	.nscale_sel_mask = GPT_NSCALE_MASK,
-	.nscale_sel_shift = GPT_NSCALE_SHIFT,
-};
-
-/* gpt rate configuration table, in ascending order of rates */
-struct gpt_rate_tbl gpt_rtbl[] = {
-	/* For pll1 = 332 MHz */
-	{.mscale = 4, .nscale = 0}, /* 41.5 MHz */
-	{.mscale = 2, .nscale = 0}, /* 55.3 MHz */
-	{.mscale = 1, .nscale = 0}, /* 83 MHz */
-};
-
-/* gpt0 synth clk config*/
-static struct gpt_clk_config gpt0_synth_config = {
-	.synth_reg = PRSC1_CLK_CFG,
-	.masks = &gpt_masks,
-};
-
-/* gpt synth clock */
-static struct clk gpt0_synth_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &pll1_clk,
-	.calc_rate = &gpt_calc_rate,
-	.recalc = &gpt_clk_recalc,
-	.set_rate = &gpt_clk_set_rate,
-	.rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
-	.private_data = &gpt0_synth_config,
-};
-
-/* gpt parents */
-static struct pclk_info gpt0_pclk_info[] = {
-	{
-		.pclk = &gpt0_synth_clk,
-		.pclk_val = AUX_CLK_PLL1_VAL,
-	}, {
-		.pclk = &pll3_48m_clk,
-		.pclk_val = AUX_CLK_PLL3_VAL,
-	},
-};
-
-/* gpt parent select structure */
-static struct pclk_sel gpt0_pclk_sel = {
-	.pclk_info = gpt0_pclk_info,
-	.pclk_count = ARRAY_SIZE(gpt0_pclk_info),
-	.pclk_sel_reg = PERIP_CLK_CFG,
-	.pclk_sel_mask = GPT_CLK_MASK,
-};
-
-/* gpt0 ARM1 subsystem timer clock */
-static struct clk gpt0_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk_sel = &gpt0_pclk_sel,
-	.pclk_sel_shift = GPT0_CLK_SHIFT,
-	.recalc = &follow_parent,
-};
-
-
-/* Note: gpt0 and gpt1 share same parent clocks */
-/* gpt parent select structure */
-static struct pclk_sel gpt1_pclk_sel = {
-	.pclk_info = gpt0_pclk_info,
-	.pclk_count = ARRAY_SIZE(gpt0_pclk_info),
-	.pclk_sel_reg = PERIP_CLK_CFG,
-	.pclk_sel_mask = GPT_CLK_MASK,
-};
-
-/* gpt1 timer clock */
-static struct clk gpt1_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk_sel = &gpt1_pclk_sel,
-	.pclk_sel_shift = GPT1_CLK_SHIFT,
-	.recalc = &follow_parent,
-};
-
-/* gpt2 synth clk config*/
-static struct gpt_clk_config gpt2_synth_config = {
-	.synth_reg = PRSC2_CLK_CFG,
-	.masks = &gpt_masks,
-};
-
-/* gpt synth clock */
-static struct clk gpt2_synth_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &pll1_clk,
-	.calc_rate = &gpt_calc_rate,
-	.recalc = &gpt_clk_recalc,
-	.set_rate = &gpt_clk_set_rate,
-	.rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
-	.private_data = &gpt2_synth_config,
-};
-
-/* gpt parents */
-static struct pclk_info gpt2_pclk_info[] = {
-	{
-		.pclk = &gpt2_synth_clk,
-		.pclk_val = AUX_CLK_PLL1_VAL,
-	}, {
-		.pclk = &pll3_48m_clk,
-		.pclk_val = AUX_CLK_PLL3_VAL,
-	},
-};
-
-/* gpt parent select structure */
-static struct pclk_sel gpt2_pclk_sel = {
-	.pclk_info = gpt2_pclk_info,
-	.pclk_count = ARRAY_SIZE(gpt2_pclk_info),
-	.pclk_sel_reg = PERIP_CLK_CFG,
-	.pclk_sel_mask = GPT_CLK_MASK,
-};
-
-/* gpt2 timer clock */
-static struct clk gpt2_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk_sel = &gpt2_pclk_sel,
-	.pclk_sel_shift = GPT2_CLK_SHIFT,
-	.recalc = &follow_parent,
-};
-
-/* gpt3 synth clk config*/
-static struct gpt_clk_config gpt3_synth_config = {
-	.synth_reg = PRSC3_CLK_CFG,
-	.masks = &gpt_masks,
-};
-
-/* gpt synth clock */
-static struct clk gpt3_synth_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &pll1_clk,
-	.calc_rate = &gpt_calc_rate,
-	.recalc = &gpt_clk_recalc,
-	.set_rate = &gpt_clk_set_rate,
-	.rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
-	.private_data = &gpt3_synth_config,
-};
-
-/* gpt parents */
-static struct pclk_info gpt3_pclk_info[] = {
-	{
-		.pclk = &gpt3_synth_clk,
-		.pclk_val = AUX_CLK_PLL1_VAL,
-	}, {
-		.pclk = &pll3_48m_clk,
-		.pclk_val = AUX_CLK_PLL3_VAL,
-	},
-};
-
-/* gpt parent select structure */
-static struct pclk_sel gpt3_pclk_sel = {
-	.pclk_info = gpt3_pclk_info,
-	.pclk_count = ARRAY_SIZE(gpt3_pclk_info),
-	.pclk_sel_reg = PERIP_CLK_CFG,
-	.pclk_sel_mask = GPT_CLK_MASK,
-};
-
-/* gpt3 timer clock */
-static struct clk gpt3_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk_sel = &gpt3_pclk_sel,
-	.pclk_sel_shift = GPT3_CLK_SHIFT,
-	.recalc = &follow_parent,
-};
-
-/* clock derived from pll3 clk */
-/* usbh0 clock */
-static struct clk usbh0_clk = {
-	.pclk = &pll3_48m_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = USBH0_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* usbh1 clock */
-static struct clk usbh1_clk = {
-	.pclk = &pll3_48m_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = USBH1_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* usbd clock */
-static struct clk usbd_clk = {
-	.pclk = &pll3_48m_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = USBD_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* clock derived from ahb clk */
-/* apb masks structure */
-static struct bus_clk_masks apb_masks = {
-	.mask = HCLK_PCLK_RATIO_MASK,
-	.shift = HCLK_PCLK_RATIO_SHIFT,
-};
-
-/* apb configuration structure */
-static struct bus_clk_config apb_config = {
-	.reg = CORE_CLK_CFG,
-	.masks = &apb_masks,
-};
-
-/* apb clock */
-static struct clk apb_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &ahb_clk,
-	.calc_rate = &bus_calc_rate,
-	.recalc = &bus_clk_recalc,
-	.set_rate = &bus_clk_set_rate,
-	.rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2},
-	.private_data = &apb_config,
-};
-
-/* i2c clock */
-static struct clk i2c_clk = {
-	.pclk = &ahb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = I2C_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* dma clock */
-static struct clk dma_clk = {
-	.pclk = &ahb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = DMA_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* jpeg clock */
-static struct clk jpeg_clk = {
-	.pclk = &ahb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = JPEG_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* gmac clock */
-static struct clk gmac_clk = {
-	.pclk = &ahb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = GMAC_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* smi clock */
-static struct clk smi_clk = {
-	.pclk = &ahb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = SMI_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* fsmc clock */
-static struct clk fsmc_clk = {
-	.pclk = &ahb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = FSMC_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* clock derived from apb clk */
-/* adc clock */
-static struct clk adc_clk = {
-	.pclk = &apb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = ADC_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* ssp0 clock */
-static struct clk ssp0_clk = {
-	.pclk = &apb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = SSP0_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* ssp1 clock */
-static struct clk ssp1_clk = {
-	.pclk = &apb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = SSP1_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* ssp2 clock */
-static struct clk ssp2_clk = {
-	.pclk = &apb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = SSP2_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* gpio0 ARM subsystem clock */
-static struct clk gpio0_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &apb_clk,
-	.recalc = &follow_parent,
-};
-
-/* gpio1 clock */
-static struct clk gpio1_clk = {
-	.pclk = &apb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = GPIO1_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* gpio2 clock */
-static struct clk gpio2_clk = {
-	.pclk = &apb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = GPIO2_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-static struct clk dummy_apb_pclk;
-
-/* array of all spear 6xx clock lookups */
-static struct clk_lookup spear_clk_lookups[] = {
-	{ .con_id = "apb_pclk",		.clk = &dummy_apb_pclk},
-	/* root clks */
-	{ .con_id = "osc_32k_clk",	.clk = &osc_32k_clk},
-	{ .con_id = "osc_30m_clk",	.clk = &osc_30m_clk},
-	/* clock derived from 32 KHz os		 clk */
-	{ .dev_id = "rtc-spear",	.clk = &rtc_clk},
-	/* clock derived from 30 MHz os		 clk */
-	{ .con_id = "pll1_clk",		.clk = &pll1_clk},
-	{ .con_id = "pll3_48m_clk",	.clk = &pll3_48m_clk},
-	{ .dev_id = "wdt",		.clk = &wdt_clk},
-	/* clock derived from pll1 clk */
-	{ .con_id = "cpu_clk",		.clk = &cpu_clk},
-	{ .con_id = "ahb_clk",		.clk = &ahb_clk},
-	{ .con_id = "uart_synth_clk",	.clk = &uart_synth_clk},
-	{ .con_id = "firda_synth_clk",	.clk = &firda_synth_clk},
-	{ .con_id = "clcd_synth_clk",	.clk = &clcd_synth_clk},
-	{ .con_id = "gpt0_synth_clk",	.clk = &gpt0_synth_clk},
-	{ .con_id = "gpt2_synth_clk",	.clk = &gpt2_synth_clk},
-	{ .con_id = "gpt3_synth_clk",	.clk = &gpt3_synth_clk},
-	{ .dev_id = "d0000000.serial",	.clk = &uart0_clk},
-	{ .dev_id = "d0080000.serial",	.clk = &uart1_clk},
-	{ .dev_id = "firda",		.clk = &firda_clk},
-	{ .dev_id = "clcd",		.clk = &clcd_clk},
-	{ .dev_id = "gpt0",		.clk = &gpt0_clk},
-	{ .dev_id = "gpt1",		.clk = &gpt1_clk},
-	{ .dev_id = "gpt2",		.clk = &gpt2_clk},
-	{ .dev_id = "gpt3",		.clk = &gpt3_clk},
-	/* clock derived from pll3 clk */
-	{ .dev_id = "designware_udc",	.clk = &usbd_clk},
-	{ .con_id = "usbh.0_clk",	.clk = &usbh0_clk},
-	{ .con_id = "usbh.1_clk",	.clk = &usbh1_clk},
-	/* clock derived from ahb clk */
-	{ .con_id = "apb_clk",		.clk = &apb_clk},
-	{ .dev_id = "d0200000.i2c",	.clk = &i2c_clk},
-	{ .dev_id = "dma",		.clk = &dma_clk},
-	{ .dev_id = "jpeg",		.clk = &jpeg_clk},
-	{ .dev_id = "gmac",		.clk = &gmac_clk},
-	{ .dev_id = "smi",		.clk = &smi_clk},
-	{ .dev_id = "fsmc-nand",	.clk = &fsmc_clk},
-	/* clock derived from apb clk */
-	{ .dev_id = "adc",		.clk = &adc_clk},
-	{ .dev_id = "ssp-pl022.0",	.clk = &ssp0_clk},
-	{ .dev_id = "ssp-pl022.1",	.clk = &ssp1_clk},
-	{ .dev_id = "ssp-pl022.2",	.clk = &ssp2_clk},
-	{ .dev_id = "f0100000.gpio",	.clk = &gpio0_clk},
-	{ .dev_id = "fc980000.gpio",	.clk = &gpio1_clk},
-	{ .dev_id = "d8100000.gpio",	.clk = &gpio2_clk},
-};
-
-void __init spear6xx_clk_init(void)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++)
-		clk_register(&spear_clk_lookups[i]);
-
-	clk_init();
-}
diff --git a/arch/arm/mach-spear6xx/include/mach/generic.h b/arch/arm/mach-spear6xx/include/mach/generic.h
index 116b99301cf5..65514b159370 100644
--- a/arch/arm/mach-spear6xx/include/mach/generic.h
+++ b/arch/arm/mach-spear6xx/include/mach/generic.h
@@ -15,34 +15,9 @@
 #define __MACH_GENERIC_H
 
 #include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/amba/bus.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-
-/*
- * Each GPT has 2 timer channels
- * Following GPT channels will be used as clock source and clockevent
- */
-#define SPEAR_GPT0_BASE		SPEAR6XX_CPU_TMR_BASE
-#define SPEAR_GPT0_CHAN0_IRQ	IRQ_CPU_GPT1_1
-#define SPEAR_GPT0_CHAN1_IRQ	IRQ_CPU_GPT1_2
-
-/* Add spear6xx family device structure declarations here */
-extern struct amba_device gpio_device[];
-extern struct amba_device uart_device[];
-extern struct sys_timer spear6xx_timer;
-
-/* Add spear6xx family function declarations here */
-void __init spear_setup_timer(void);
-void __init spear6xx_map_io(void);
-void __init spear6xx_init_irq(void);
-void __init spear6xx_init(void);
-void __init spear600_init(void);
-void __init spear6xx_clk_init(void);
 
+void __init spear_setup_of_timer(void);
 void spear_restart(char, const char *);
-
-/* Add spear600 machine device structure declarations here */
+void __init spear6xx_clk_init(void);
 
 #endif /* __MACH_GENERIC_H */
diff --git a/arch/arm/mach-spear6xx/include/mach/hardware.h b/arch/arm/mach-spear6xx/include/mach/hardware.h
index 0b3f96ae2848..40a8c178f10d 100644
--- a/arch/arm/mach-spear6xx/include/mach/hardware.h
+++ b/arch/arm/mach-spear6xx/include/mach/hardware.h
@@ -1,23 +1 @@
-/*
- * arch/arm/mach-spear6xx/include/mach/hardware.h
- *
- * Hardware definitions for SPEAr6xx machine family
- *
- * Copyright (C) 2009 ST Microelectronics
- * Rajeev Kumar<rajeev-dlh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_HARDWARE_H
-#define __MACH_HARDWARE_H
-
-#include <plat/hardware.h>
-#include <mach/spear.h>
-
-/* Vitual to physical translation of statically mapped space */
-#define IO_ADDRESS(x)		(x | 0xF0000000)
-
-#endif /* __MACH_HARDWARE_H */
+/* empty */
diff --git a/arch/arm/mach-spear6xx/include/mach/irqs.h b/arch/arm/mach-spear6xx/include/mach/irqs.h
index 8f214b03d75d..37a5c411a866 100644
--- a/arch/arm/mach-spear6xx/include/mach/irqs.h
+++ b/arch/arm/mach-spear6xx/include/mach/irqs.h
@@ -16,82 +16,10 @@
 
 /* IRQ definitions */
 /* VIC 1 */
-#define IRQ_INTRCOMM_SW_IRQ			0
-#define IRQ_INTRCOMM_CPU_1			1
-#define IRQ_INTRCOMM_CPU_2			2
-#define IRQ_INTRCOMM_RAS2A11_1			3
-#define IRQ_INTRCOMM_RAS2A11_2			4
-#define IRQ_INTRCOMM_RAS2A12_1			5
-#define IRQ_INTRCOMM_RAS2A12_2			6
-#define IRQ_GEN_RAS_0				7
-#define IRQ_GEN_RAS_1				8
-#define IRQ_GEN_RAS_2				9
-#define IRQ_GEN_RAS_3				10
-#define IRQ_GEN_RAS_4				11
-#define IRQ_GEN_RAS_5				12
-#define IRQ_GEN_RAS_6				13
-#define IRQ_GEN_RAS_7				14
-#define IRQ_GEN_RAS_8				15
-#define IRQ_CPU_GPT1_1				16
-#define IRQ_CPU_GPT1_2				17
-#define IRQ_LOCAL_GPIO				18
-#define IRQ_PLL_UNLOCK				19
-#define IRQ_JPEG				20
-#define IRQ_FSMC				21
-#define IRQ_IRDA				22
-#define IRQ_RESERVED				23
-#define IRQ_UART_0				24
-#define IRQ_UART_1				25
-#define IRQ_SSP_1				26
-#define IRQ_SSP_2				27
-#define IRQ_I2C					28
-#define IRQ_GEN_RAS_9				29
-#define IRQ_GEN_RAS_10				30
-#define IRQ_GEN_RAS_11				31
-
-/* VIC 2 */
-#define IRQ_APPL_GPT1_1				32
-#define IRQ_APPL_GPT1_2				33
-#define IRQ_APPL_GPT2_1				34
-#define IRQ_APPL_GPT2_2				35
-#define IRQ_APPL_GPIO				36
-#define IRQ_APPL_SSP				37
-#define IRQ_APPL_ADC				38
-#define IRQ_APPL_RESERVED			39
-#define IRQ_AHB_EXP_MASTER			40
-#define IRQ_DDR_CONTROLLER			41
-#define IRQ_BASIC_DMA				42
-#define IRQ_BASIC_RESERVED1			43
-#define IRQ_BASIC_SMI				44
-#define IRQ_BASIC_CLCD				45
-#define IRQ_EXP_AHB_1				46
-#define IRQ_EXP_AHB_2				47
-#define IRQ_BASIC_GPT1_1			48
-#define IRQ_BASIC_GPT1_2			49
-#define IRQ_BASIC_RTC				50
-#define IRQ_BASIC_GPIO				51
-#define IRQ_BASIC_WDT				52
-#define IRQ_BASIC_RESERVED			53
-#define IRQ_AHB_EXP_SLAVE			54
-#define IRQ_GMAC_1				55
-#define IRQ_GMAC_2				56
-#define IRQ_USB_DEV				57
-#define IRQ_USB_H_OHCI_0			58
-#define IRQ_USB_H_EHCI_0			59
-#define IRQ_USB_H_OHCI_1			60
-#define IRQ_USB_H_EHCI_1			61
-#define IRQ_EXP_AHB_3				62
-#define IRQ_EXP_AHB_4				63
-
 #define IRQ_VIC_END				64
 
 /* GPIO pins virtual irqs */
-#define SPEAR_GPIO_INT_BASE	IRQ_VIC_END
-#define SPEAR_GPIO0_INT_BASE	SPEAR_GPIO_INT_BASE
-#define SPEAR_GPIO1_INT_BASE	(SPEAR_GPIO0_INT_BASE + 8)
-#define SPEAR_GPIO2_INT_BASE	(SPEAR_GPIO1_INT_BASE + 8)
-#define SPEAR_GPIO_INT_END	(SPEAR_GPIO2_INT_BASE + 8)
-#define VIRTUAL_IRQS		(SPEAR_GPIO_INT_END - IRQ_VIC_END)
-#define NR_IRQS			(IRQ_VIC_END + VIRTUAL_IRQS)
+#define VIRTUAL_IRQS				24
+#define NR_IRQS					(IRQ_VIC_END + VIRTUAL_IRQS)
 
 #endif	/* __MACH_IRQS_H */
diff --git a/arch/arm/mach-spear6xx/include/mach/misc_regs.h b/arch/arm/mach-spear6xx/include/mach/misc_regs.h
index 68c20a007b0d..179e45774b3a 100644
--- a/arch/arm/mach-spear6xx/include/mach/misc_regs.h
+++ b/arch/arm/mach-spear6xx/include/mach/misc_regs.h
@@ -14,161 +14,9 @@
 #ifndef __MACH_MISC_REGS_H
 #define __MACH_MISC_REGS_H
 
-#include <mach/hardware.h>
+#include <mach/spear.h>
 
 #define MISC_BASE		IOMEM(VA_SPEAR6XX_ICM3_MISC_REG_BASE)
-
-#define SOC_CFG_CTR		(MISC_BASE + 0x000)
-#define DIAG_CFG_CTR		(MISC_BASE + 0x004)
-#define PLL1_CTR		(MISC_BASE + 0x008)
-#define PLL1_FRQ		(MISC_BASE + 0x00C)
-#define PLL1_MOD		(MISC_BASE + 0x010)
-#define PLL2_CTR		(MISC_BASE + 0x014)
-/* PLL_CTR register masks */
-#define PLL_ENABLE		2
-#define PLL_MODE_SHIFT		4
-#define PLL_MODE_MASK		0x3
-#define PLL_MODE_NORMAL		0
-#define PLL_MODE_FRACTION	1
-#define PLL_MODE_DITH_DSB	2
-#define PLL_MODE_DITH_SSB	3
-
-#define PLL2_FRQ		(MISC_BASE + 0x018)
-/* PLL FRQ register masks */
-#define PLL_DIV_N_SHIFT		0
-#define PLL_DIV_N_MASK		0xFF
-#define PLL_DIV_P_SHIFT		8
-#define PLL_DIV_P_MASK		0x7
-#define PLL_NORM_FDBK_M_SHIFT	24
-#define PLL_NORM_FDBK_M_MASK	0xFF
-#define PLL_DITH_FDBK_M_SHIFT	16
-#define PLL_DITH_FDBK_M_MASK	0xFFFF
-
-#define PLL2_MOD		(MISC_BASE + 0x01C)
-#define PLL_CLK_CFG		(MISC_BASE + 0x020)
-#define CORE_CLK_CFG		(MISC_BASE + 0x024)
-/* CORE CLK CFG register masks */
-#define PLL_HCLK_RATIO_SHIFT	10
-#define PLL_HCLK_RATIO_MASK	0x3
-#define HCLK_PCLK_RATIO_SHIFT	8
-#define HCLK_PCLK_RATIO_MASK	0x3
-
-#define PERIP_CLK_CFG		(MISC_BASE + 0x028)
-/* PERIP_CLK_CFG register masks */
-#define CLCD_CLK_SHIFT		2
-#define CLCD_CLK_MASK		0x3
-#define UART_CLK_SHIFT		4
-#define UART_CLK_MASK		0x1
-#define FIRDA_CLK_SHIFT		5
-#define FIRDA_CLK_MASK		0x3
-#define GPT0_CLK_SHIFT		8
-#define GPT1_CLK_SHIFT		10
-#define GPT2_CLK_SHIFT		11
-#define GPT3_CLK_SHIFT		12
-#define GPT_CLK_MASK		0x1
-#define AUX_CLK_PLL3_VAL	0
-#define AUX_CLK_PLL1_VAL	1
-
-#define PERIP1_CLK_ENB		(MISC_BASE + 0x02C)
-/* PERIP1_CLK_ENB register masks */
-#define UART0_CLK_ENB		3
-#define UART1_CLK_ENB		4
-#define SSP0_CLK_ENB		5
-#define SSP1_CLK_ENB		6
-#define I2C_CLK_ENB		7
-#define JPEG_CLK_ENB		8
-#define FSMC_CLK_ENB		9
-#define FIRDA_CLK_ENB		10
-#define GPT2_CLK_ENB		11
-#define GPT3_CLK_ENB		12
-#define GPIO2_CLK_ENB		13
-#define SSP2_CLK_ENB		14
-#define ADC_CLK_ENB		15
-#define GPT1_CLK_ENB		11
-#define RTC_CLK_ENB		17
-#define GPIO1_CLK_ENB		18
-#define DMA_CLK_ENB		19
-#define SMI_CLK_ENB		21
-#define CLCD_CLK_ENB		22
-#define GMAC_CLK_ENB		23
-#define USBD_CLK_ENB		24
-#define USBH0_CLK_ENB		25
-#define USBH1_CLK_ENB		26
-
-#define SOC_CORE_ID		(MISC_BASE + 0x030)
-#define RAS_CLK_ENB		(MISC_BASE + 0x034)
-#define PERIP1_SOF_RST		(MISC_BASE + 0x038)
-/* PERIP1_SOF_RST register masks */
-#define JPEG_SOF_RST		8
-
-#define SOC_USER_ID		(MISC_BASE + 0x03C)
-#define RAS_SOF_RST		(MISC_BASE + 0x040)
-#define PRSC1_CLK_CFG		(MISC_BASE + 0x044)
-#define PRSC2_CLK_CFG		(MISC_BASE + 0x048)
-#define PRSC3_CLK_CFG		(MISC_BASE + 0x04C)
-/* gpt synthesizer register masks */
-#define GPT_MSCALE_SHIFT	0
-#define GPT_MSCALE_MASK		0xFFF
-#define GPT_NSCALE_SHIFT	12
-#define GPT_NSCALE_MASK		0xF
-
-#define AMEM_CLK_CFG		(MISC_BASE + 0x050)
-#define EXPI_CLK_CFG		(MISC_BASE + 0x054)
-#define CLCD_CLK_SYNT		(MISC_BASE + 0x05C)
-#define FIRDA_CLK_SYNT		(MISC_BASE + 0x060)
-#define UART_CLK_SYNT		(MISC_BASE + 0x064)
-#define GMAC_CLK_SYNT		(MISC_BASE + 0x068)
-#define RAS1_CLK_SYNT		(MISC_BASE + 0x06C)
-#define RAS2_CLK_SYNT		(MISC_BASE + 0x070)
-#define RAS3_CLK_SYNT		(MISC_BASE + 0x074)
-#define RAS4_CLK_SYNT		(MISC_BASE + 0x078)
-/* aux clk synthesiser register masks for irda to ras4 */
-#define AUX_SYNT_ENB		31
-#define AUX_EQ_SEL_SHIFT	30
-#define AUX_EQ_SEL_MASK		1
-#define AUX_EQ1_SEL		0
-#define AUX_EQ2_SEL		1
-#define AUX_XSCALE_SHIFT	16
-#define AUX_XSCALE_MASK		0xFFF
-#define AUX_YSCALE_SHIFT	0
-#define AUX_YSCALE_MASK		0xFFF
-
-#define ICM1_ARB_CFG		(MISC_BASE + 0x07C)
-#define ICM2_ARB_CFG		(MISC_BASE + 0x080)
-#define ICM3_ARB_CFG		(MISC_BASE + 0x084)
-#define ICM4_ARB_CFG		(MISC_BASE + 0x088)
-#define ICM5_ARB_CFG		(MISC_BASE + 0x08C)
-#define ICM6_ARB_CFG		(MISC_BASE + 0x090)
-#define ICM7_ARB_CFG		(MISC_BASE + 0x094)
-#define ICM8_ARB_CFG		(MISC_BASE + 0x098)
-#define ICM9_ARB_CFG		(MISC_BASE + 0x09C)
 #define DMA_CHN_CFG		(MISC_BASE + 0x0A0)
-#define USB2_PHY_CFG		(MISC_BASE + 0x0A4)
-#define GMAC_CFG_CTR		(MISC_BASE + 0x0A8)
-#define EXPI_CFG_CTR		(MISC_BASE + 0x0AC)
-#define PRC1_LOCK_CTR		(MISC_BASE + 0x0C0)
-#define PRC2_LOCK_CTR		(MISC_BASE + 0x0C4)
-#define PRC3_LOCK_CTR		(MISC_BASE + 0x0C8)
-#define PRC4_LOCK_CTR		(MISC_BASE + 0x0CC)
-#define PRC1_IRQ_CTR		(MISC_BASE + 0x0D0)
-#define PRC2_IRQ_CTR		(MISC_BASE + 0x0D4)
-#define PRC3_IRQ_CTR		(MISC_BASE + 0x0D8)
-#define PRC4_IRQ_CTR		(MISC_BASE + 0x0DC)
-#define PWRDOWN_CFG_CTR		(MISC_BASE + 0x0E0)
-#define COMPSSTL_1V8_CFG	(MISC_BASE + 0x0E4)
-#define COMPSSTL_2V5_CFG	(MISC_BASE + 0x0E8)
-#define COMPCOR_3V3_CFG		(MISC_BASE + 0x0EC)
-#define SSTLPAD_CFG_CTR		(MISC_BASE + 0x0F0)
-#define BIST1_CFG_CTR		(MISC_BASE + 0x0F4)
-#define BIST2_CFG_CTR		(MISC_BASE + 0x0F8)
-#define BIST3_CFG_CTR		(MISC_BASE + 0x0FC)
-#define BIST4_CFG_CTR		(MISC_BASE + 0x100)
-#define BIST5_CFG_CTR		(MISC_BASE + 0x104)
-#define BIST1_STS_RES		(MISC_BASE + 0x108)
-#define BIST2_STS_RES		(MISC_BASE + 0x10C)
-#define BIST3_STS_RES		(MISC_BASE + 0x110)
-#define BIST4_STS_RES		(MISC_BASE + 0x114)
-#define BIST5_STS_RES		(MISC_BASE + 0x118)
-#define SYSERR_CFG_CTR		(MISC_BASE + 0x11C)
 
 #endif /* __MACH_MISC_REGS_H */
diff --git a/arch/arm/mach-spear6xx/include/mach/spear.h b/arch/arm/mach-spear6xx/include/mach/spear.h
index 7fd621532def..cb8ed2f4dc85 100644
--- a/arch/arm/mach-spear6xx/include/mach/spear.h
+++ b/arch/arm/mach-spear6xx/include/mach/spear.h
@@ -15,69 +15,25 @@
 #define __MACH_SPEAR6XX_H
 
 #include <asm/memory.h>
-#include <mach/spear600.h>
 
-#define SPEAR6XX_ML_SDRAM_BASE		UL(0x00000000)
 /* ICM1 - Low speed connection */
 #define SPEAR6XX_ICM1_BASE		UL(0xD0000000)
-
+#define VA_SPEAR6XX_ICM1_BASE		UL(0xFD000000)
 #define SPEAR6XX_ICM1_UART0_BASE	UL(0xD0000000)
-#define VA_SPEAR6XX_ICM1_UART0_BASE	IO_ADDRESS(SPEAR6XX_ICM1_UART0_BASE)
-
-#define SPEAR6XX_ICM1_UART1_BASE	UL(0xD0080000)
-#define SPEAR6XX_ICM1_SSP0_BASE		UL(0xD0100000)
-#define SPEAR6XX_ICM1_SSP1_BASE		UL(0xD0180000)
-#define SPEAR6XX_ICM1_I2C_BASE		UL(0xD0200000)
-#define SPEAR6XX_ICM1_JPEG_BASE		UL(0xD0800000)
-#define SPEAR6XX_ICM1_IRDA_BASE		UL(0xD1000000)
-#define SPEAR6XX_ICM1_FSMC_BASE		UL(0xD1800000)
-#define SPEAR6XX_ICM1_NAND_BASE		UL(0xD2000000)
-#define SPEAR6XX_ICM1_SRAM_BASE		UL(0xD2800000)
-
-/* ICM2 - Application Subsystem */
-#define SPEAR6XX_ICM2_BASE		UL(0xD8000000)
-#define SPEAR6XX_ICM2_TMR0_BASE		UL(0xD8000000)
-#define SPEAR6XX_ICM2_TMR1_BASE		UL(0xD8080000)
-#define SPEAR6XX_ICM2_GPIO_BASE		UL(0xD8100000)
-#define SPEAR6XX_ICM2_SSP2_BASE		UL(0xD8180000)
-#define SPEAR6XX_ICM2_ADC_BASE		UL(0xD8200000)
+#define VA_SPEAR6XX_ICM1_UART0_BASE	(VA_SPEAR6XX_ICM1_2_BASE | SPEAR6XX_ICM1_UART0_BASE)
 
 /* ML-1, 2 - Multi Layer CPU Subsystem */
 #define SPEAR6XX_ML_CPU_BASE		UL(0xF0000000)
-#define SPEAR6XX_CPU_TMR_BASE		UL(0xF0000000)
-#define SPEAR6XX_CPU_GPIO_BASE		UL(0xF0100000)
-#define SPEAR6XX_CPU_VIC_SEC_BASE	UL(0xF1000000)
-#define VA_SPEAR6XX_CPU_VIC_SEC_BASE	IO_ADDRESS(SPEAR6XX_CPU_VIC_SEC_BASE)
-#define SPEAR6XX_CPU_VIC_PRI_BASE	UL(0xF1100000)
-#define VA_SPEAR6XX_CPU_VIC_PRI_BASE	IO_ADDRESS(SPEAR6XX_CPU_VIC_PRI_BASE)
+#define VA_SPEAR6XX_ML_CPU_BASE		UL(0xF0000000)
 
 /* ICM3 - Basic Subsystem */
-#define SPEAR6XX_ICM3_BASE		UL(0xF8000000)
-#define SPEAR6XX_ICM3_SMEM_BASE		UL(0xF8000000)
 #define SPEAR6XX_ICM3_SMI_CTRL_BASE	UL(0xFC000000)
-#define SPEAR6XX_ICM3_CLCD_BASE		UL(0xFC200000)
+#define VA_SPEAR6XX_ICM3_SMI_CTRL_BASE	UL(0xFC000000)
 #define SPEAR6XX_ICM3_DMA_BASE		UL(0xFC400000)
-#define SPEAR6XX_ICM3_SDRAM_CTRL_BASE	UL(0xFC600000)
-#define SPEAR6XX_ICM3_TMR_BASE		UL(0xFC800000)
-#define SPEAR6XX_ICM3_WDT_BASE		UL(0xFC880000)
-#define SPEAR6XX_ICM3_RTC_BASE		UL(0xFC900000)
-#define SPEAR6XX_ICM3_GPIO_BASE		UL(0xFC980000)
 #define SPEAR6XX_ICM3_SYS_CTRL_BASE	UL(0xFCA00000)
-#define VA_SPEAR6XX_ICM3_SYS_CTRL_BASE	IO_ADDRESS(SPEAR6XX_ICM3_SYS_CTRL_BASE)
+#define VA_SPEAR6XX_ICM3_SYS_CTRL_BASE	(VA_SPEAR6XX_ICM3_SMI_CTRL_BASE | SPEAR6XX_ICM3_SYS_CTRL_BASE)
 #define SPEAR6XX_ICM3_MISC_REG_BASE	UL(0xFCA80000)
-#define VA_SPEAR6XX_ICM3_MISC_REG_BASE	IO_ADDRESS(SPEAR6XX_ICM3_MISC_REG_BASE)
-
-/* ICM4 - High Speed Connection */
-#define SPEAR6XX_ICM4_BASE		UL(0xE0000000)
-#define SPEAR6XX_ICM4_GMAC_BASE		UL(0xE0800000)
-#define SPEAR6XX_ICM4_USBD_FIFO_BASE	UL(0xE1000000)
-#define SPEAR6XX_ICM4_USBD_CSR_BASE	UL(0xE1100000)
-#define SPEAR6XX_ICM4_USBD_PLDT_BASE	UL(0xE1200000)
-#define SPEAR6XX_ICM4_USB_EHCI0_BASE	UL(0xE1800000)
-#define SPEAR6XX_ICM4_USB_OHCI0_BASE	UL(0xE1900000)
-#define SPEAR6XX_ICM4_USB_EHCI1_BASE	UL(0xE2000000)
-#define SPEAR6XX_ICM4_USB_OHCI1_BASE	UL(0xE2100000)
-#define SPEAR6XX_ICM4_USB_ARB_BASE	UL(0xE2800000)
+#define VA_SPEAR6XX_ICM3_MISC_REG_BASE	(VA_SPEAR6XX_ICM3_SMI_CTRL_BASE | SPEAR6XX_ICM3_MISC_REG_BASE)
 
 /* Debug uart for linux, will be used for debug and uncompress messages */
 #define SPEAR_DBG_UART_BASE		SPEAR6XX_ICM1_UART0_BASE
diff --git a/arch/arm/mach-spear6xx/include/mach/spear600.h b/arch/arm/mach-spear6xx/include/mach/spear600.h
deleted file mode 100644
index c068cc50b0fb..000000000000
--- a/arch/arm/mach-spear6xx/include/mach/spear600.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * arch/arm/mach-spear66xx/include/mach/spear600.h
- *
- * SPEAr600 Machine specific definition
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifdef	CONFIG_MACH_SPEAR600
-
-#ifndef __MACH_SPEAR600_H
-#define __MACH_SPEAR600_H
-
-#endif /* __MACH_SPEAR600_H */
-
-#endif /* CONFIG_MACH_SPEAR600 */
diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c
index 2ed8b14c82c8..2e2e3596583e 100644
--- a/arch/arm/mach-spear6xx/spear6xx.c
+++ b/arch/arm/mach-spear6xx/spear6xx.c
@@ -13,41 +13,404 @@
  * warranty of any kind, whether express or implied.
  */
 
+#include <linux/amba/pl08x.h>
+#include <linux/clk.h>
+#include <linux/err.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
+#include <asm/hardware/pl080.h>
 #include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <plat/pl080.h>
 #include <mach/generic.h>
-#include <mach/hardware.h>
+#include <mach/spear.h>
 
-/* Following will create static virtual/physical mappings */
-static struct map_desc spear6xx_io_desc[] __initdata = {
+/* dmac device registration */
+static struct pl08x_channel_data spear600_dma_info[] = {
 	{
-		.virtual	= VA_SPEAR6XX_ICM1_UART0_BASE,
-		.pfn		= __phys_to_pfn(SPEAR6XX_ICM1_UART0_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
+		.bus_id = "ssp1_rx",
+		.min_signal = 0,
+		.max_signal = 0,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
 	}, {
-		.virtual	= VA_SPEAR6XX_CPU_VIC_PRI_BASE,
-		.pfn		= __phys_to_pfn(SPEAR6XX_CPU_VIC_PRI_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
+		.bus_id = "ssp1_tx",
+		.min_signal = 1,
+		.max_signal = 1,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
 	}, {
-		.virtual	= VA_SPEAR6XX_CPU_VIC_SEC_BASE,
-		.pfn		= __phys_to_pfn(SPEAR6XX_CPU_VIC_SEC_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
+		.bus_id = "uart0_rx",
+		.min_signal = 2,
+		.max_signal = 2,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart0_tx",
+		.min_signal = 3,
+		.max_signal = 3,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart1_rx",
+		.min_signal = 4,
+		.max_signal = 4,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart1_tx",
+		.min_signal = 5,
+		.max_signal = 5,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ssp2_rx",
+		.min_signal = 6,
+		.max_signal = 6,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ssp2_tx",
+		.min_signal = 7,
+		.max_signal = 7,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ssp0_rx",
+		.min_signal = 8,
+		.max_signal = 8,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ssp0_tx",
+		.min_signal = 9,
+		.max_signal = 9,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "i2c_rx",
+		.min_signal = 10,
+		.max_signal = 10,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "i2c_tx",
+		.min_signal = 11,
+		.max_signal = 11,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "irda",
+		.min_signal = 12,
+		.max_signal = 12,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "adc",
+		.min_signal = 13,
+		.max_signal = 13,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "to_jpeg",
+		.min_signal = 14,
+		.max_signal = 14,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "from_jpeg",
+		.min_signal = 15,
+		.max_signal = 15,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras0_rx",
+		.min_signal = 0,
+		.max_signal = 0,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras0_tx",
+		.min_signal = 1,
+		.max_signal = 1,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras1_rx",
+		.min_signal = 2,
+		.max_signal = 2,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras1_tx",
+		.min_signal = 3,
+		.max_signal = 3,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras2_rx",
+		.min_signal = 4,
+		.max_signal = 4,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras2_tx",
+		.min_signal = 5,
+		.max_signal = 5,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras3_rx",
+		.min_signal = 6,
+		.max_signal = 6,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras3_tx",
+		.min_signal = 7,
+		.max_signal = 7,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras4_rx",
+		.min_signal = 8,
+		.max_signal = 8,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras4_tx",
+		.min_signal = 9,
+		.max_signal = 9,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras5_rx",
+		.min_signal = 10,
+		.max_signal = 10,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras5_tx",
+		.min_signal = 11,
+		.max_signal = 11,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras6_rx",
+		.min_signal = 12,
+		.max_signal = 12,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras6_tx",
+		.min_signal = 13,
+		.max_signal = 13,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras7_rx",
+		.min_signal = 14,
+		.max_signal = 14,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras7_tx",
+		.min_signal = 15,
+		.max_signal = 15,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
 	}, {
-		.virtual	= VA_SPEAR6XX_ICM3_SYS_CTRL_BASE,
-		.pfn		= __phys_to_pfn(SPEAR6XX_ICM3_SYS_CTRL_BASE),
-		.length		= SZ_4K,
+		.bus_id = "ext0_rx",
+		.min_signal = 0,
+		.max_signal = 0,
+		.muxval = 2,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext0_tx",
+		.min_signal = 1,
+		.max_signal = 1,
+		.muxval = 2,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext1_rx",
+		.min_signal = 2,
+		.max_signal = 2,
+		.muxval = 2,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext1_tx",
+		.min_signal = 3,
+		.max_signal = 3,
+		.muxval = 2,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext2_rx",
+		.min_signal = 4,
+		.max_signal = 4,
+		.muxval = 2,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext2_tx",
+		.min_signal = 5,
+		.max_signal = 5,
+		.muxval = 2,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext3_rx",
+		.min_signal = 6,
+		.max_signal = 6,
+		.muxval = 2,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext3_tx",
+		.min_signal = 7,
+		.max_signal = 7,
+		.muxval = 2,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext4_rx",
+		.min_signal = 8,
+		.max_signal = 8,
+		.muxval = 2,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext4_tx",
+		.min_signal = 9,
+		.max_signal = 9,
+		.muxval = 2,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext5_rx",
+		.min_signal = 10,
+		.max_signal = 10,
+		.muxval = 2,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext5_tx",
+		.min_signal = 11,
+		.max_signal = 11,
+		.muxval = 2,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext6_rx",
+		.min_signal = 12,
+		.max_signal = 12,
+		.muxval = 2,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext6_tx",
+		.min_signal = 13,
+		.max_signal = 13,
+		.muxval = 2,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext7_rx",
+		.min_signal = 14,
+		.max_signal = 14,
+		.muxval = 2,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext7_tx",
+		.min_signal = 15,
+		.max_signal = 15,
+		.muxval = 2,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	},
+};
+
+struct pl08x_platform_data pl080_plat_data = {
+	.memcpy_channel = {
+		.bus_id = "memcpy",
+		.cctl = (PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT | \
+			PL080_BSIZE_16 << PL080_CONTROL_DB_SIZE_SHIFT | \
+			PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT | \
+			PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT | \
+			PL080_CONTROL_PROT_BUFF | PL080_CONTROL_PROT_CACHE | \
+			PL080_CONTROL_PROT_SYS),
+	},
+	.lli_buses = PL08X_AHB1,
+	.mem_buses = PL08X_AHB1,
+	.get_signal = pl080_get_signal,
+	.put_signal = pl080_put_signal,
+	.slave_channels = spear600_dma_info,
+	.num_slave_channels = ARRAY_SIZE(spear600_dma_info),
+};
+
+/*
+ * Following will create 16MB static virtual/physical mappings
+ * PHYSICAL		VIRTUAL
+ * 0xF0000000		0xF0000000
+ * 0xF1000000		0xF1000000
+ * 0xD0000000		0xFD000000
+ * 0xFC000000		0xFC000000
+ */
+struct map_desc spear6xx_io_desc[] __initdata = {
+	{
+		.virtual	= VA_SPEAR6XX_ML_CPU_BASE,
+		.pfn		= __phys_to_pfn(SPEAR6XX_ML_CPU_BASE),
+		.length		= 2 * SZ_16M,
+		.type		= MT_DEVICE
+	},	{
+		.virtual	= VA_SPEAR6XX_ICM1_BASE,
+		.pfn		= __phys_to_pfn(SPEAR6XX_ICM1_BASE),
+		.length		= SZ_16M,
 		.type		= MT_DEVICE
 	}, {
-		.virtual	= VA_SPEAR6XX_ICM3_MISC_REG_BASE,
-		.pfn		= __phys_to_pfn(SPEAR6XX_ICM3_MISC_REG_BASE),
-		.length		= SZ_4K,
+		.virtual	= VA_SPEAR6XX_ICM3_SMI_CTRL_BASE,
+		.pfn		= __phys_to_pfn(SPEAR6XX_ICM3_SMI_CTRL_BASE),
+		.length		= SZ_16M,
 		.type		= MT_DEVICE
 	},
 };
@@ -56,9 +419,6 @@ static struct map_desc spear6xx_io_desc[] __initdata = {
 void __init spear6xx_map_io(void)
 {
 	iotable_init(spear6xx_io_desc, ARRAY_SIZE(spear6xx_io_desc));
-
-	/* This will initialize clock framework */
-	spear6xx_clk_init();
 }
 
 static void __init spear6xx_timer_init(void)
@@ -66,6 +426,8 @@ static void __init spear6xx_timer_init(void)
 	char pclk_name[] = "pll3_48m_clk";
 	struct clk *gpt_clk, *pclk;
 
+	spear6xx_clk_init();
+
 	/* get the system timer clock */
 	gpt_clk = clk_get_sys("gpt0", NULL);
 	if (IS_ERR(gpt_clk)) {
@@ -85,16 +447,24 @@ static void __init spear6xx_timer_init(void)
 	clk_put(gpt_clk);
 	clk_put(pclk);
 
-	spear_setup_timer();
+	spear_setup_of_timer();
 }
 
 struct sys_timer spear6xx_timer = {
 	.init = spear6xx_timer_init,
 };
 
+/* Add auxdata to pass platform data */
+struct of_dev_auxdata spear6xx_auxdata_lookup[] __initdata = {
+	OF_DEV_AUXDATA("arm,pl080", SPEAR6XX_ICM3_DMA_BASE, NULL,
+			&pl080_plat_data),
+	{}
+};
+
 static void __init spear600_dt_init(void)
 {
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+	of_platform_populate(NULL, of_default_bus_match_table,
+			spear6xx_auxdata_lookup, NULL);
 }
 
 static const char *spear600_dt_board_compat[] = {
diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index d0f2546706ca..6a113a9bb87a 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -50,6 +50,14 @@ config TEGRA_PCI
 	depends on ARCH_TEGRA_2x_SOC
 	select PCI
 
+config TEGRA_AHB
+	bool "Enable AHB driver for NVIDIA Tegra SoCs"
+	default y
+	help
+	  Adds AHB configuration functionality for NVIDIA Tegra SoCs,
+	  which controls AHB bus master arbitration and some
+	  perfomance parameters(priority, prefech size).
+
 comment "Tegra board type"
 
 config MACH_HARMONY
@@ -111,7 +119,7 @@ config MACH_VENTANA
          Support for the nVidia Ventana development platform
 
 choice
-        prompt "Low-level debug console UART"
+        prompt "Default low-level debug console UART"
         default TEGRA_DEBUG_UART_NONE
 
 config TEGRA_DEBUG_UART_NONE
@@ -134,6 +142,33 @@ config TEGRA_DEBUG_UARTE
 
 endchoice
 
+choice
+	prompt "Automatic low-level debug console UART"
+	default TEGRA_DEBUG_UART_AUTO_NONE
+
+config TEGRA_DEBUG_UART_AUTO_NONE
+	bool "None"
+
+config TEGRA_DEBUG_UART_AUTO_ODMDATA
+	bool "Via ODMDATA"
+	help
+	  Automatically determines which UART to use for low-level debug based
+	  on the ODMDATA value. This value is part of the BCT, and is written
+	  to the boot memory device using nvflash, or other flashing tool.
+	  When bits 19:18 are 3, then bits 17:15 indicate which UART to use;
+	  0/1/2/3/4 are UART A/B/C/D/E.
+
+config TEGRA_DEBUG_UART_AUTO_SCRATCH
+	bool "Via UART scratch register"
+	help
+	  Automatically determines which UART to use for low-level debug based
+	  on the UART scratch register value. Some bootloaders put ASCII 'D'
+	  in this register when they initialize their own console UART output.
+	  Using this option allows the kernel to automatically pick the same
+	  UART.
+
+endchoice
+
 config TEGRA_SYSTEM_DMA
 	bool "Enable system DMA driver for NVIDIA Tegra SoCs"
 	default y
diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile
index d87d968115ec..2eb4445ddb14 100644
--- a/arch/arm/mach-tegra/Makefile
+++ b/arch/arm/mach-tegra/Makefile
@@ -5,7 +5,6 @@ obj-y                                   += io.o
 obj-y                                   += irq.o
 obj-y                                   += clock.o
 obj-y                                   += timer.o
-obj-y                                   += pinmux.o
 obj-y					+= fuse.o
 obj-y					+= pmc.o
 obj-y					+= flowctrl.o
@@ -14,8 +13,6 @@ obj-$(CONFIG_CPU_IDLE)			+= sleep.o
 obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= powergate.o
 obj-$(CONFIG_ARCH_TEGRA_2x_SOC)         += tegra2_clocks.o
 obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= tegra2_emc.o
-obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= pinmux-tegra20-tables.o
-obj-$(CONFIG_ARCH_TEGRA_3x_SOC)		+= pinmux-tegra30-tables.o
 obj-$(CONFIG_ARCH_TEGRA_3x_SOC)		+= board-dt-tegra30.o
 obj-$(CONFIG_ARCH_TEGRA_3x_SOC)		+= tegra30_clocks.o
 obj-$(CONFIG_SMP)			+= platsmp.o headsmp.o
diff --git a/arch/arm/mach-tegra/board-dt-tegra20.c b/arch/arm/mach-tegra/board-dt-tegra20.c
index 0952494f481a..eb7249db50a5 100644
--- a/arch/arm/mach-tegra/board-dt-tegra20.c
+++ b/arch/arm/mach-tegra/board-dt-tegra20.c
@@ -37,7 +37,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/setup.h>
-#include <asm/hardware/gic.h>
 
 #include <mach/iomap.h>
 #include <mach/irqs.h>
@@ -47,15 +46,7 @@
 #include "clock.h"
 #include "devices.h"
 
-void harmony_pinmux_init(void);
-void paz00_pinmux_init(void);
-void seaboard_pinmux_init(void);
-void trimslice_pinmux_init(void);
-void ventana_pinmux_init(void);
-
 struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = {
-	OF_DEV_AUXDATA("nvidia,tegra20-pinmux", TEGRA_APB_MISC_BASE + 0x14, "tegra-pinmux", NULL),
-	OF_DEV_AUXDATA("nvidia,tegra20-gpio", TEGRA_GPIO_BASE, "tegra-gpio", NULL),
 	OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC1_BASE, "sdhci-tegra.0", NULL),
 	OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC2_BASE, "sdhci-tegra.1", NULL),
 	OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC3_BASE, "sdhci-tegra.2", NULL),
@@ -64,9 +55,9 @@ struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("nvidia,tegra20-i2c", TEGRA_I2C2_BASE, "tegra-i2c.1", NULL),
 	OF_DEV_AUXDATA("nvidia,tegra20-i2c", TEGRA_I2C3_BASE, "tegra-i2c.2", NULL),
 	OF_DEV_AUXDATA("nvidia,tegra20-i2c-dvc", TEGRA_DVC_BASE, "tegra-i2c.3", NULL),
-	OF_DEV_AUXDATA("nvidia,tegra20-i2s", TEGRA_I2S1_BASE, "tegra-i2s.0", NULL),
-	OF_DEV_AUXDATA("nvidia,tegra20-i2s", TEGRA_I2S2_BASE, "tegra-i2s.1", NULL),
-	OF_DEV_AUXDATA("nvidia,tegra20-das", TEGRA_APB_MISC_DAS_BASE, "tegra-das", NULL),
+	OF_DEV_AUXDATA("nvidia,tegra20-i2s", TEGRA_I2S1_BASE, "tegra20-i2s.0", NULL),
+	OF_DEV_AUXDATA("nvidia,tegra20-i2s", TEGRA_I2S2_BASE, "tegra20-i2s.1", NULL),
+	OF_DEV_AUXDATA("nvidia,tegra20-das", TEGRA_APB_MISC_DAS_BASE, "tegra20-das", NULL),
 	OF_DEV_AUXDATA("nvidia,tegra20-ehci", TEGRA_USB_BASE, "tegra-ehci.0",
 		       &tegra_ehci1_pdata),
 	OF_DEV_AUXDATA("nvidia,tegra20-ehci", TEGRA_USB2_BASE, "tegra-ehci.1",
@@ -95,33 +86,10 @@ static struct of_device_id tegra_dt_match_table[] __initdata = {
 	{}
 };
 
-static struct {
-	char *machine;
-	void (*init)(void);
-} pinmux_configs[] = {
-	{ "compulab,trimslice", trimslice_pinmux_init },
-	{ "nvidia,harmony", harmony_pinmux_init },
-	{ "compal,paz00", paz00_pinmux_init },
-	{ "nvidia,seaboard", seaboard_pinmux_init },
-	{ "nvidia,ventana", ventana_pinmux_init },
-};
-
 static void __init tegra_dt_init(void)
 {
-	int i;
-
 	tegra_clk_init_from_table(tegra_dt_clk_init_table);
 
-	for (i = 0; i < ARRAY_SIZE(pinmux_configs); i++) {
-		if (of_machine_is_compatible(pinmux_configs[i].machine)) {
-			pinmux_configs[i].init();
-			break;
-		}
-	}
-
-	WARN(i == ARRAY_SIZE(pinmux_configs),
-		"Unknown platform! Pinmuxing not initialized\n");
-
 	/*
 	 * Finished with the static registrations now; fill in the missing
 	 * devices
@@ -142,6 +110,7 @@ DT_MACHINE_START(TEGRA_DT, "nVidia Tegra20 (Flattened Device Tree)")
 	.handle_irq	= gic_handle_irq,
 	.timer		= &tegra_timer,
 	.init_machine	= tegra_dt_init,
+	.init_late	= tegra_init_late,
 	.restart	= tegra_assert_system_reset,
 	.dt_compat	= tegra20_dt_board_compat,
 MACHINE_END
diff --git a/arch/arm/mach-tegra/board-dt-tegra30.c b/arch/arm/mach-tegra/board-dt-tegra30.c
index 5f7c03e972f3..4f76fa7a5da3 100644
--- a/arch/arm/mach-tegra/board-dt-tegra30.c
+++ b/arch/arm/mach-tegra/board-dt-tegra30.c
@@ -51,12 +51,22 @@ struct of_dev_auxdata tegra30_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("nvidia,tegra20-i2c", 0x7000C500, "tegra-i2c.2", NULL),
 	OF_DEV_AUXDATA("nvidia,tegra20-i2c", 0x7000C700, "tegra-i2c.3", NULL),
 	OF_DEV_AUXDATA("nvidia,tegra20-i2c", 0x7000D000, "tegra-i2c.4", NULL),
+	OF_DEV_AUXDATA("nvidia,tegra30-ahub", 0x70080000, "tegra30-ahub", NULL),
 	{}
 };
 
 static __initdata struct tegra_clk_init_table tegra_dt_clk_init_table[] = {
 	/* name		parent		rate		enabled */
 	{ "uarta",	"pll_p",	408000000,	true },
+	{ "pll_a",	"pll_p_out1",	564480000,	true },
+	{ "pll_a_out0",	"pll_a",	11289600,	true },
+	{ "extern1",	"pll_a_out0",	0,		true },
+	{ "clk_out_1",	"extern1",	0,		true },
+	{ "i2s0",	"pll_a_out0",	11289600,	false},
+	{ "i2s1",	"pll_a_out0",	11289600,	false},
+	{ "i2s2",	"pll_a_out0",	11289600,	false},
+	{ "i2s3",	"pll_a_out0",	11289600,	false},
+	{ "i2s4",	"pll_a_out0",	11289600,	false},
 	{ NULL,		NULL,		0,		0},
 };
 
@@ -80,6 +90,7 @@ DT_MACHINE_START(TEGRA30_DT, "NVIDIA Tegra30 (Flattened Device Tree)")
 	.handle_irq	= gic_handle_irq,
 	.timer		= &tegra_timer,
 	.init_machine	= tegra30_dt_init,
+	.init_late	= tegra_init_late,
 	.restart	= tegra_assert_system_reset,
 	.dt_compat	= tegra30_dt_board_compat,
 MACHINE_END
diff --git a/arch/arm/mach-tegra/board-harmony-pinmux.c b/arch/arm/mach-tegra/board-harmony-pinmux.c
index 1af85bccc0f1..83d420fbc58c 100644
--- a/arch/arm/mach-tegra/board-harmony-pinmux.c
+++ b/arch/arm/mach-tegra/board-harmony-pinmux.c
@@ -2,6 +2,7 @@
  * arch/arm/mach-tegra/board-harmony-pinmux.c
  *
  * Copyright (C) 2010 Google, Inc.
+ * Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
  *
  * This software is licensed under the terms of the GNU General Public
  * License version 2, as published by the Free Software Foundation, and
@@ -15,153 +16,138 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/gpio.h>
-#include <linux/of.h>
 
-#include <mach/pinmux.h>
-#include <mach/pinmux-tegra20.h>
-
-#include "gpio-names.h"
 #include "board-harmony.h"
 #include "board-pinmux.h"
 
-static struct tegra_pingroup_config harmony_pinmux[] = {
-	{TEGRA_PINGROUP_ATA,   TEGRA_MUX_IDE,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_ATB,   TEGRA_MUX_SDIO4,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_ATC,   TEGRA_MUX_NAND,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_ATD,   TEGRA_MUX_GMI,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_ATE,   TEGRA_MUX_GMI,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_CDEV1, TEGRA_MUX_PLLA_OUT,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_CDEV2, TEGRA_MUX_PLLP_OUT4,     TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_CRTP,  TEGRA_MUX_CRT,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_CSUS,  TEGRA_MUX_VI_SENSOR_CLK, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_DAP1,  TEGRA_MUX_DAP1,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_DAP2,  TEGRA_MUX_DAP2,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_DAP3,  TEGRA_MUX_DAP3,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_DAP4,  TEGRA_MUX_DAP4,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_DDC,   TEGRA_MUX_I2C2,          TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_DTA,   TEGRA_MUX_SDIO2,         TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_DTB,   TEGRA_MUX_RSVD1,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_DTC,   TEGRA_MUX_RSVD1,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_DTD,   TEGRA_MUX_SDIO2,         TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_DTE,   TEGRA_MUX_RSVD1,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_DTF,   TEGRA_MUX_I2C3,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_GMA,   TEGRA_MUX_SDIO4,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_GMB,   TEGRA_MUX_GMI,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_GMC,   TEGRA_MUX_UARTD,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_GMD,   TEGRA_MUX_GMI,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_GME,   TEGRA_MUX_SDIO4,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_GPU,   TEGRA_MUX_GMI,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_GPU7,  TEGRA_MUX_RTCK,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_GPV,   TEGRA_MUX_PCIE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_HDINT, TEGRA_MUX_HDMI,          TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_I2CP,  TEGRA_MUX_I2C,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_IRRX,  TEGRA_MUX_UARTA,         TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_IRTX,  TEGRA_MUX_UARTA,         TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_KBCA,  TEGRA_MUX_KBC,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_KBCB,  TEGRA_MUX_KBC,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_KBCC,  TEGRA_MUX_KBC,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_KBCD,  TEGRA_MUX_KBC,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_KBCE,  TEGRA_MUX_KBC,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_KBCF,  TEGRA_MUX_KBC,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LCSN,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LD0,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD1,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD10,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD11,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD12,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD13,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD14,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD15,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD16,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD17,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD2,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD3,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD4,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD5,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD6,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD7,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD8,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD9,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LDC,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LDI,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LHP0,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LHP1,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LHP2,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LHS,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LM0,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LM1,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LPP,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LPW0,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LPW1,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LPW2,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LSC0,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LSC1,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LSCK,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LSDA,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LSDI,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LSPI,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LVP0,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LVP1,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LVS,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_OWC,   TEGRA_MUX_RSVD2,         TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_PMC,   TEGRA_MUX_PWR_ON,        TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_PTA,   TEGRA_MUX_HDMI,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_RM,    TEGRA_MUX_I2C,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SDB,   TEGRA_MUX_PWM,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SDC,   TEGRA_MUX_PWM,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SDD,   TEGRA_MUX_PWM,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SDIO1, TEGRA_MUX_SDIO1,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SLXA,  TEGRA_MUX_PCIE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SLXC,  TEGRA_MUX_SPDIF,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SLXD,  TEGRA_MUX_SPDIF,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SLXK,  TEGRA_MUX_PCIE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SPDI,  TEGRA_MUX_RSVD2,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SPDO,  TEGRA_MUX_RSVD2,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SPIA,  TEGRA_MUX_GMI,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SPIB,  TEGRA_MUX_GMI,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SPIC,  TEGRA_MUX_GMI,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SPID,  TEGRA_MUX_SPI1,          TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SPIE,  TEGRA_MUX_SPI1,          TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SPIF,  TEGRA_MUX_SPI1,          TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SPIG,  TEGRA_MUX_SPI2_ALT,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SPIH,  TEGRA_MUX_SPI2_ALT,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_UAA,   TEGRA_MUX_ULPI,          TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_UAB,   TEGRA_MUX_ULPI,          TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_UAC,   TEGRA_MUX_RSVD2,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_UAD,   TEGRA_MUX_IRDA,          TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_UCA,   TEGRA_MUX_UARTC,         TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_UCB,   TEGRA_MUX_UARTC,         TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_UDA,   TEGRA_MUX_ULPI,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_CK32,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_DDRC,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_PMCA,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_PMCB,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_PMCC,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_PMCD,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_PMCE,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_XM2C,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_XM2D,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-};
-
-static struct tegra_gpio_table gpio_table[] = {
-	{ .gpio = TEGRA_GPIO_SD2_CD,		.enable = true	},
-	{ .gpio = TEGRA_GPIO_SD2_WP,		.enable = true	},
-	{ .gpio = TEGRA_GPIO_SD2_POWER,		.enable = true	},
-	{ .gpio = TEGRA_GPIO_SD4_CD,		.enable = true	},
-	{ .gpio = TEGRA_GPIO_SD4_WP,		.enable = true	},
-	{ .gpio = TEGRA_GPIO_SD4_POWER,		.enable = true	},
-	{ .gpio = TEGRA_GPIO_CDC_IRQ,		.enable = true	},
-	{ .gpio = TEGRA_GPIO_HP_DET,		.enable = true	},
-	{ .gpio = TEGRA_GPIO_INT_MIC_EN,	.enable = true	},
-	{ .gpio = TEGRA_GPIO_EXT_MIC_EN,	.enable = true	},
+static struct pinctrl_map harmony_map[] = {
+	TEGRA_MAP_MUXCONF("ata",   "ide",           none, driven),
+	TEGRA_MAP_MUXCONF("atb",   "sdio4",         none, driven),
+	TEGRA_MAP_MUXCONF("atc",   "nand",          none, driven),
+	TEGRA_MAP_MUXCONF("atd",   "gmi",           none, driven),
+	TEGRA_MAP_MUXCONF("ate",   "gmi",           none, driven),
+	TEGRA_MAP_MUXCONF("cdev1", "plla_out",      none, driven),
+	TEGRA_MAP_MUXCONF("cdev2", "pllp_out4",     down, tristate),
+	TEGRA_MAP_MUXCONF("crtp",  "crt",           none, tristate),
+	TEGRA_MAP_MUXCONF("csus",  "vi_sensor_clk", down, tristate),
+	TEGRA_MAP_MUXCONF("dap1",  "dap1",          none, driven),
+	TEGRA_MAP_MUXCONF("dap2",  "dap2",          none, tristate),
+	TEGRA_MAP_MUXCONF("dap3",  "dap3",          none, tristate),
+	TEGRA_MAP_MUXCONF("dap4",  "dap4",          none, tristate),
+	TEGRA_MAP_MUXCONF("ddc",   "i2c2",          up,   driven),
+	TEGRA_MAP_MUXCONF("dta",   "sdio2",         up,   driven),
+	TEGRA_MAP_MUXCONF("dtb",   "rsvd1",         none, driven),
+	TEGRA_MAP_MUXCONF("dtc",   "rsvd1",         none, tristate),
+	TEGRA_MAP_MUXCONF("dtd",   "sdio2",         up,   driven),
+	TEGRA_MAP_MUXCONF("dte",   "rsvd1",         none, tristate),
+	TEGRA_MAP_MUXCONF("dtf",   "i2c3",          none, tristate),
+	TEGRA_MAP_MUXCONF("gma",   "sdio4",         none, driven),
+	TEGRA_MAP_MUXCONF("gmb",   "gmi",           none, driven),
+	TEGRA_MAP_MUXCONF("gmc",   "uartd",         none, driven),
+	TEGRA_MAP_MUXCONF("gmd",   "gmi",           none, driven),
+	TEGRA_MAP_MUXCONF("gme",   "sdio4",         none, driven),
+	TEGRA_MAP_MUXCONF("gpu",   "gmi",           none, tristate),
+	TEGRA_MAP_MUXCONF("gpu7",  "rtck",          none, driven),
+	TEGRA_MAP_MUXCONF("gpv",   "pcie",          none, driven),
+	TEGRA_MAP_MUXCONF("hdint", "hdmi",          na,   tristate),
+	TEGRA_MAP_MUXCONF("i2cp",  "i2cp",          none, driven),
+	TEGRA_MAP_MUXCONF("irrx",  "uarta",         up,   tristate),
+	TEGRA_MAP_MUXCONF("irtx",  "uarta",         up,   tristate),
+	TEGRA_MAP_MUXCONF("kbca",  "kbc",           up,   driven),
+	TEGRA_MAP_MUXCONF("kbcb",  "kbc",           up,   driven),
+	TEGRA_MAP_MUXCONF("kbcc",  "kbc",           up,   driven),
+	TEGRA_MAP_MUXCONF("kbcd",  "kbc",           up,   driven),
+	TEGRA_MAP_MUXCONF("kbce",  "kbc",           up,   driven),
+	TEGRA_MAP_MUXCONF("kbcf",  "kbc",           up,   driven),
+	TEGRA_MAP_MUXCONF("lcsn",  "displaya",      na,   tristate),
+	TEGRA_MAP_MUXCONF("ld0",   "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld1",   "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld10",  "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld11",  "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld12",  "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld13",  "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld14",  "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld15",  "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld16",  "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld17",  "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld2",   "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld3",   "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld4",   "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld5",   "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld6",   "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld7",   "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld8",   "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld9",   "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ldc",   "displaya",      na,   tristate),
+	TEGRA_MAP_MUXCONF("ldi",   "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("lhp0",  "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("lhp1",  "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("lhp2",  "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("lhs",   "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("lm0",   "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("lm1",   "displaya",      na,   tristate),
+	TEGRA_MAP_MUXCONF("lpp",   "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("lpw0",  "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("lpw1",  "displaya",      na,   tristate),
+	TEGRA_MAP_MUXCONF("lpw2",  "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("lsc0",  "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("lsc1",  "displaya",      na,   tristate),
+	TEGRA_MAP_MUXCONF("lsck",  "displaya",      na,   tristate),
+	TEGRA_MAP_MUXCONF("lsda",  "displaya",      na,   tristate),
+	TEGRA_MAP_MUXCONF("lsdi",  "displaya",      na,   tristate),
+	TEGRA_MAP_MUXCONF("lspi",  "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("lvp0",  "displaya",      na,   tristate),
+	TEGRA_MAP_MUXCONF("lvp1",  "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("lvs",   "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("owc",   "rsvd2",         na,   tristate),
+	TEGRA_MAP_MUXCONF("pmc",   "pwr_on",        na,   driven),
+	TEGRA_MAP_MUXCONF("pta",   "hdmi",          none, driven),
+	TEGRA_MAP_MUXCONF("rm",    "i2c1",          none, driven),
+	TEGRA_MAP_MUXCONF("sdb",   "pwm",           na,   tristate),
+	TEGRA_MAP_MUXCONF("sdc",   "pwm",           up,   driven),
+	TEGRA_MAP_MUXCONF("sdd",   "pwm",           up,   tristate),
+	TEGRA_MAP_MUXCONF("sdio1", "sdio1",         none, tristate),
+	TEGRA_MAP_MUXCONF("slxa",  "pcie",          none, driven),
+	TEGRA_MAP_MUXCONF("slxc",  "spdif",         none, tristate),
+	TEGRA_MAP_MUXCONF("slxd",  "spdif",         none, tristate),
+	TEGRA_MAP_MUXCONF("slxk",  "pcie",          none, driven),
+	TEGRA_MAP_MUXCONF("spdi",  "rsvd2",         none, tristate),
+	TEGRA_MAP_MUXCONF("spdo",  "rsvd2",         none, tristate),
+	TEGRA_MAP_MUXCONF("spia",  "gmi",           none, driven),
+	TEGRA_MAP_MUXCONF("spib",  "gmi",           none, driven),
+	TEGRA_MAP_MUXCONF("spic",  "gmi",           up,   tristate),
+	TEGRA_MAP_MUXCONF("spid",  "spi1",          down, tristate),
+	TEGRA_MAP_MUXCONF("spie",  "spi1",          up,   tristate),
+	TEGRA_MAP_MUXCONF("spif",  "spi1",          down, tristate),
+	TEGRA_MAP_MUXCONF("spig",  "spi2_alt",      none, tristate),
+	TEGRA_MAP_MUXCONF("spih",  "spi2_alt",      up,   tristate),
+	TEGRA_MAP_MUXCONF("uaa",   "ulpi",          up,   tristate),
+	TEGRA_MAP_MUXCONF("uab",   "ulpi",          up,   tristate),
+	TEGRA_MAP_MUXCONF("uac",   "rsvd2",         none, tristate),
+	TEGRA_MAP_MUXCONF("uad",   "irda",          up,   tristate),
+	TEGRA_MAP_MUXCONF("uca",   "uartc",         up,   tristate),
+	TEGRA_MAP_MUXCONF("ucb",   "uartc",         up,   tristate),
+	TEGRA_MAP_MUXCONF("uda",   "ulpi",          none, tristate),
+	TEGRA_MAP_CONF("ck32",    none, na),
+	TEGRA_MAP_CONF("ddrc",    none, na),
+	TEGRA_MAP_CONF("pmca",    none, na),
+	TEGRA_MAP_CONF("pmcb",    none, na),
+	TEGRA_MAP_CONF("pmcc",    none, na),
+	TEGRA_MAP_CONF("pmcd",    none, na),
+	TEGRA_MAP_CONF("pmce",    none, na),
+	TEGRA_MAP_CONF("xm2c",    none, na),
+	TEGRA_MAP_CONF("xm2d",    none, na),
+	TEGRA_MAP_CONF("ls",      up,   na),
+	TEGRA_MAP_CONF("lc",      up,   na),
+	TEGRA_MAP_CONF("ld17_0",  down, na),
+	TEGRA_MAP_CONF("ld19_18", down, na),
+	TEGRA_MAP_CONF("ld21_20", down, na),
+	TEGRA_MAP_CONF("ld23_22", down, na),
 };
 
 static struct tegra_board_pinmux_conf conf = {
-	.pgs = harmony_pinmux,
-	.pg_count = ARRAY_SIZE(harmony_pinmux),
-	.gpios = gpio_table,
-	.gpio_count = ARRAY_SIZE(gpio_table),
+	.maps = harmony_map,
+	.map_count = ARRAY_SIZE(harmony_map),
 };
 
 void harmony_pinmux_init(void)
diff --git a/arch/arm/mach-tegra/board-harmony.c b/arch/arm/mach-tegra/board-harmony.c
index c00aadb01e09..e65e837f4013 100644
--- a/arch/arm/mach-tegra/board-harmony.c
+++ b/arch/arm/mach-tegra/board-harmony.c
@@ -19,6 +19,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/serial_8250.h>
+#include <linux/of_serial.h>
 #include <linux/clk.h>
 #include <linux/dma-mapping.h>
 #include <linux/pda_power.h>
@@ -52,6 +53,7 @@ static struct plat_serial8250_port debug_uart_platform_data[] = {
 		.irq		= INT_UARTD,
 		.flags		= UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
 		.type		= PORT_TEGRA,
+		.handle_break	= tegra_serial_handle_break,
 		.iotype		= UPIO_MEM,
 		.regshift	= 2,
 		.uartclk	= 216000000,
@@ -122,7 +124,6 @@ static struct platform_device *harmony_devices[] __initdata = {
 	&tegra_ehci3_device,
 	&tegra_i2s_device1,
 	&tegra_das_device,
-	&tegra_pcm_device,
 	&harmony_audio_device,
 };
 
@@ -191,5 +192,6 @@ MACHINE_START(HARMONY, "harmony")
 	.handle_irq	= gic_handle_irq,
 	.timer          = &tegra_timer,
 	.init_machine   = tegra_harmony_init,
+	.init_late	= tegra_init_late,
 	.restart	= tegra_assert_system_reset,
 MACHINE_END
diff --git a/arch/arm/mach-tegra/board-paz00-pinmux.c b/arch/arm/mach-tegra/board-paz00-pinmux.c
index c775572dcea4..6f1111b48e7c 100644
--- a/arch/arm/mach-tegra/board-paz00-pinmux.c
+++ b/arch/arm/mach-tegra/board-paz00-pinmux.c
@@ -2,6 +2,7 @@
  * arch/arm/mach-tegra/board-paz00-pinmux.c
  *
  * Copyright (C) 2010 Marc Dietrich <marvin24@gmx.de>
+ * Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
  *
  * This software is licensed under the terms of the GNU General Public
  * License version 2, as published by the Free Software Foundation, and
@@ -15,150 +16,138 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/gpio.h>
-#include <linux/of.h>
 
-#include <mach/pinmux.h>
-#include <mach/pinmux-tegra20.h>
-
-#include "gpio-names.h"
 #include "board-paz00.h"
 #include "board-pinmux.h"
 
-static struct tegra_pingroup_config paz00_pinmux[] = {
-	{TEGRA_PINGROUP_ATA,   TEGRA_MUX_GMI,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_ATB,   TEGRA_MUX_SDIO4,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_ATC,   TEGRA_MUX_GMI,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_ATD,   TEGRA_MUX_GMI,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_ATE,   TEGRA_MUX_GMI,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_CDEV1, TEGRA_MUX_PLLA_OUT,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_CDEV2, TEGRA_MUX_PLLP_OUT4,     TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_CRTP,  TEGRA_MUX_CRT,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_CSUS,  TEGRA_MUX_PLLC_OUT1,     TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_DAP1,  TEGRA_MUX_DAP1,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_DAP2,  TEGRA_MUX_GMI,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_DAP3,  TEGRA_MUX_DAP3,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_DAP4,  TEGRA_MUX_DAP4,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_DDC,   TEGRA_MUX_I2C2,          TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_DTA,   TEGRA_MUX_RSVD1,         TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_DTB,   TEGRA_MUX_RSVD1,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_DTC,   TEGRA_MUX_RSVD1,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_DTD,   TEGRA_MUX_RSVD1,         TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_DTE,   TEGRA_MUX_RSVD1,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_DTF,   TEGRA_MUX_I2C3,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_GMA,   TEGRA_MUX_SDIO4,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_GMB,   TEGRA_MUX_GMI,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_GMC,   TEGRA_MUX_GMI,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_GMD,   TEGRA_MUX_GMI,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_GME,   TEGRA_MUX_SDIO4,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_GPU,   TEGRA_MUX_PWM,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_GPU7,  TEGRA_MUX_RTCK,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_GPV,   TEGRA_MUX_PCIE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_HDINT, TEGRA_MUX_HDMI,          TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_I2CP,  TEGRA_MUX_I2C,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_IRRX,  TEGRA_MUX_UARTA,         TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_IRTX,  TEGRA_MUX_UARTA,         TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_KBCA,  TEGRA_MUX_KBC,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_KBCB,  TEGRA_MUX_SDIO2,         TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_KBCC,  TEGRA_MUX_KBC,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_KBCD,  TEGRA_MUX_SDIO2,         TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_KBCE,  TEGRA_MUX_KBC,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_KBCF,  TEGRA_MUX_KBC,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LCSN,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LD0,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD1,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD10,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD11,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD12,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD13,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD14,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD15,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD16,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD17,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD2,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD3,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD4,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD5,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD6,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD7,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD8,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD9,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LDC,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LDI,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LHP0,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LHP1,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LHP2,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LHS,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LM0,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LM1,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LPP,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LPW0,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LPW1,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LPW2,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LSC0,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LSC1,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LSCK,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LSDA,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LSDI,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LSPI,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LVP0,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LVP1,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LVS,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_OWC,   TEGRA_MUX_OWR,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_PMC,   TEGRA_MUX_PWR_ON,        TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_PTA,   TEGRA_MUX_HDMI,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_RM,    TEGRA_MUX_I2C,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SDB,   TEGRA_MUX_PWM,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SDC,   TEGRA_MUX_TWC,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SDD,   TEGRA_MUX_PWM,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SDIO1, TEGRA_MUX_SDIO1,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SLXA,  TEGRA_MUX_PCIE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SLXC,  TEGRA_MUX_SPI4,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SLXD,  TEGRA_MUX_SPI4,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SLXK,  TEGRA_MUX_PCIE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SPDI,  TEGRA_MUX_RSVD2,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SPDO,  TEGRA_MUX_RSVD2,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SPIA,  TEGRA_MUX_GMI,           TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SPIB,  TEGRA_MUX_GMI,           TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SPIC,  TEGRA_MUX_GMI,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SPID,  TEGRA_MUX_GMI,           TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SPIE,  TEGRA_MUX_GMI,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SPIF,  TEGRA_MUX_RSVD4,         TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SPIG,  TEGRA_MUX_SPI2_ALT,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SPIH,  TEGRA_MUX_SPI2_ALT,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_UAA,   TEGRA_MUX_ULPI,          TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_UAB,   TEGRA_MUX_ULPI,          TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_UAC,   TEGRA_MUX_RSVD4,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_UAD,   TEGRA_MUX_SPDIF,         TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_UCA,   TEGRA_MUX_UARTC,         TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_UCB,   TEGRA_MUX_UARTC,         TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_UDA,   TEGRA_MUX_ULPI,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_CK32,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_DDRC,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_PMCA,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_PMCB,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_PMCC,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_PMCD,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_PMCE,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_XM2C,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_XM2D,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-};
-
-static struct tegra_gpio_table gpio_table[] = {
-	{ .gpio = TEGRA_GPIO_SD1_CD,	.enable = true },
-	{ .gpio = TEGRA_GPIO_SD1_WP,	.enable = true },
-	{ .gpio = TEGRA_GPIO_SD1_POWER,	.enable = true },
-	{ .gpio = TEGRA_ULPI_RST,	.enable = true },
-	{ .gpio = TEGRA_WIFI_PWRN,	.enable = true },
-	{ .gpio = TEGRA_WIFI_RST,	.enable = true },
-	{ .gpio = TEGRA_WIFI_LED,	.enable = true },
+static struct pinctrl_map paz00_map[] = {
+	TEGRA_MAP_MUXCONF("ata",   "gmi",           none, driven),
+	TEGRA_MAP_MUXCONF("atb",   "sdio4",         none, driven),
+	TEGRA_MAP_MUXCONF("atc",   "gmi",           none, driven),
+	TEGRA_MAP_MUXCONF("atd",   "gmi",           none, driven),
+	TEGRA_MAP_MUXCONF("ate",   "gmi",           none, driven),
+	TEGRA_MAP_MUXCONF("cdev1", "plla_out",      none, driven),
+	TEGRA_MAP_MUXCONF("cdev2", "pllp_out4",     down, driven),
+	TEGRA_MAP_MUXCONF("crtp",  "crt",           none, tristate),
+	TEGRA_MAP_MUXCONF("csus",  "pllc_out1",     down, tristate),
+	TEGRA_MAP_MUXCONF("dap1",  "dap1",          none, driven),
+	TEGRA_MAP_MUXCONF("dap2",  "gmi",           none, driven),
+	TEGRA_MAP_MUXCONF("dap3",  "dap3",          none, tristate),
+	TEGRA_MAP_MUXCONF("dap4",  "dap4",          none, tristate),
+	TEGRA_MAP_MUXCONF("ddc",   "i2c2",          up,   driven),
+	TEGRA_MAP_MUXCONF("dta",   "rsvd1",         up,   tristate),
+	TEGRA_MAP_MUXCONF("dtb",   "rsvd1",         none, tristate),
+	TEGRA_MAP_MUXCONF("dtc",   "rsvd1",         none, tristate),
+	TEGRA_MAP_MUXCONF("dtd",   "rsvd1",         up,   tristate),
+	TEGRA_MAP_MUXCONF("dte",   "rsvd1",         none, tristate),
+	TEGRA_MAP_MUXCONF("dtf",   "i2c3",          none, driven),
+	TEGRA_MAP_MUXCONF("gma",   "sdio4",         none, driven),
+	TEGRA_MAP_MUXCONF("gmb",   "gmi",           none, driven),
+	TEGRA_MAP_MUXCONF("gmc",   "gmi",           none, driven),
+	TEGRA_MAP_MUXCONF("gmd",   "gmi",           none, driven),
+	TEGRA_MAP_MUXCONF("gme",   "sdio4",         none, driven),
+	TEGRA_MAP_MUXCONF("gpu",   "pwm",           none, driven),
+	TEGRA_MAP_MUXCONF("gpu7",  "rtck",          none, driven),
+	TEGRA_MAP_MUXCONF("gpv",   "pcie",          none, driven),
+	TEGRA_MAP_MUXCONF("hdint", "hdmi",          na,   driven),
+	TEGRA_MAP_MUXCONF("i2cp",  "i2cp",          none, driven),
+	TEGRA_MAP_MUXCONF("irrx",  "uarta",         up,   driven),
+	TEGRA_MAP_MUXCONF("irtx",  "uarta",         up,   driven),
+	TEGRA_MAP_MUXCONF("kbca",  "kbc",           up,   driven),
+	TEGRA_MAP_MUXCONF("kbcb",  "sdio2",         up,   driven),
+	TEGRA_MAP_MUXCONF("kbcc",  "kbc",           up,   driven),
+	TEGRA_MAP_MUXCONF("kbcd",  "sdio2",         up,   driven),
+	TEGRA_MAP_MUXCONF("kbce",  "kbc",           up,   driven),
+	TEGRA_MAP_MUXCONF("kbcf",  "kbc",           up,   driven),
+	TEGRA_MAP_MUXCONF("lcsn",  "displaya",      na,   tristate),
+	TEGRA_MAP_MUXCONF("ld0",   "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld1",   "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld10",  "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld11",  "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld12",  "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld13",  "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld14",  "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld15",  "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld16",  "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld17",  "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld2",   "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld3",   "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld4",   "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld5",   "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld6",   "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld7",   "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld8",   "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld9",   "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ldc",   "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ldi",   "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("lhp0",  "displaya",      na,   tristate),
+	TEGRA_MAP_MUXCONF("lhp1",  "displaya",      na,   tristate),
+	TEGRA_MAP_MUXCONF("lhp2",  "displaya",      na,   tristate),
+	TEGRA_MAP_MUXCONF("lhs",   "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("lm0",   "displaya",      na,   tristate),
+	TEGRA_MAP_MUXCONF("lm1",   "displaya",      na,   tristate),
+	TEGRA_MAP_MUXCONF("lpp",   "displaya",      na,   tristate),
+	TEGRA_MAP_MUXCONF("lpw0",  "displaya",      na,   tristate),
+	TEGRA_MAP_MUXCONF("lpw1",  "displaya",      na,   tristate),
+	TEGRA_MAP_MUXCONF("lpw2",  "displaya",      na,   tristate),
+	TEGRA_MAP_MUXCONF("lsc0",  "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("lsc1",  "displaya",      na,   tristate),
+	TEGRA_MAP_MUXCONF("lsck",  "displaya",      na,   tristate),
+	TEGRA_MAP_MUXCONF("lsda",  "displaya",      na,   tristate),
+	TEGRA_MAP_MUXCONF("lsdi",  "displaya",      na,   tristate),
+	TEGRA_MAP_MUXCONF("lspi",  "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("lvp0",  "displaya",      na,   tristate),
+	TEGRA_MAP_MUXCONF("lvp1",  "displaya",      na,   tristate),
+	TEGRA_MAP_MUXCONF("lvs",   "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("owc",   "owr",           up,   tristate),
+	TEGRA_MAP_MUXCONF("pmc",   "pwr_on",        na,   driven),
+	TEGRA_MAP_MUXCONF("pta",   "hdmi",          none, driven),
+	TEGRA_MAP_MUXCONF("rm",    "i2c1",          none, driven),
+	TEGRA_MAP_MUXCONF("sdb",   "pwm",           na,   tristate),
+	TEGRA_MAP_MUXCONF("sdc",   "twc",           up,   tristate),
+	TEGRA_MAP_MUXCONF("sdd",   "pwm",           up,   tristate),
+	TEGRA_MAP_MUXCONF("sdio1", "sdio1",         none, driven),
+	TEGRA_MAP_MUXCONF("slxa",  "pcie",          none, tristate),
+	TEGRA_MAP_MUXCONF("slxc",  "spi4",          none, tristate),
+	TEGRA_MAP_MUXCONF("slxd",  "spi4",          none, tristate),
+	TEGRA_MAP_MUXCONF("slxk",  "pcie",          none, driven),
+	TEGRA_MAP_MUXCONF("spdi",  "rsvd2",         none, tristate),
+	TEGRA_MAP_MUXCONF("spdo",  "rsvd2",         none, driven),
+	TEGRA_MAP_MUXCONF("spia",  "gmi",           down, tristate),
+	TEGRA_MAP_MUXCONF("spib",  "gmi",           down, tristate),
+	TEGRA_MAP_MUXCONF("spic",  "gmi",           up,   driven),
+	TEGRA_MAP_MUXCONF("spid",  "gmi",           down, tristate),
+	TEGRA_MAP_MUXCONF("spie",  "gmi",           up,   tristate),
+	TEGRA_MAP_MUXCONF("spif",  "rsvd4",         down, tristate),
+	TEGRA_MAP_MUXCONF("spig",  "spi2_alt",      up,   driven),
+	TEGRA_MAP_MUXCONF("spih",  "spi2_alt",      up,   tristate),
+	TEGRA_MAP_MUXCONF("uaa",   "ulpi",          up,   driven),
+	TEGRA_MAP_MUXCONF("uab",   "ulpi",          up,   driven),
+	TEGRA_MAP_MUXCONF("uac",   "rsvd4",         none, driven),
+	TEGRA_MAP_MUXCONF("uad",   "spdif",         up,   tristate),
+	TEGRA_MAP_MUXCONF("uca",   "uartc",         up,   tristate),
+	TEGRA_MAP_MUXCONF("ucb",   "uartc",         up,   tristate),
+	TEGRA_MAP_MUXCONF("uda",   "ulpi",          none, driven),
+	TEGRA_MAP_CONF("ck32",    none, na),
+	TEGRA_MAP_CONF("ddrc",    none, na),
+	TEGRA_MAP_CONF("pmca",    none, na),
+	TEGRA_MAP_CONF("pmcb",    none, na),
+	TEGRA_MAP_CONF("pmcc",    none, na),
+	TEGRA_MAP_CONF("pmcd",    none, na),
+	TEGRA_MAP_CONF("pmce",    none, na),
+	TEGRA_MAP_CONF("xm2c",    none, na),
+	TEGRA_MAP_CONF("xm2d",    none, na),
+	TEGRA_MAP_CONF("ls",      up,   na),
+	TEGRA_MAP_CONF("lc",      up,   na),
+	TEGRA_MAP_CONF("ld17_0",  down, na),
+	TEGRA_MAP_CONF("ld19_18", down, na),
+	TEGRA_MAP_CONF("ld21_20", down, na),
+	TEGRA_MAP_CONF("ld23_22", down, na),
 };
 
 static struct tegra_board_pinmux_conf conf = {
-	.pgs = paz00_pinmux,
-	.pg_count = ARRAY_SIZE(paz00_pinmux),
-	.gpios = gpio_table,
-	.gpio_count = ARRAY_SIZE(gpio_table),
+	.maps = paz00_map,
+	.map_count = ARRAY_SIZE(paz00_map),
 };
 
 void paz00_pinmux_init(void)
diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c
index 330afdfa2475..bbc1907e98a6 100644
--- a/arch/arm/mach-tegra/board-paz00.c
+++ b/arch/arm/mach-tegra/board-paz00.c
@@ -21,6 +21,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/serial_8250.h>
+#include <linux/of_serial.h>
 #include <linux/clk.h>
 #include <linux/dma-mapping.h>
 #include <linux/gpio_keys.h>
@@ -55,6 +56,7 @@ static struct plat_serial8250_port debug_uart_platform_data[] = {
 		.irq		= INT_UARTA,
 		.flags		= UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
 		.type		= PORT_TEGRA,
+		.handle_break	= tegra_serial_handle_break,
 		.iotype		= UPIO_MEM,
 		.regshift	= 2,
 		.uartclk	= 216000000,
@@ -65,6 +67,7 @@ static struct plat_serial8250_port debug_uart_platform_data[] = {
 		.irq		= INT_UARTC,
 		.flags		= UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
 		.type		= PORT_TEGRA,
+		.handle_break	= tegra_serial_handle_break,
 		.iotype		= UPIO_MEM,
 		.regshift	= 2,
 		.uartclk	= 216000000,
@@ -159,6 +162,8 @@ static void paz00_i2c_init(void)
 
 static void paz00_usb_init(void)
 {
+	tegra_ehci2_ulpi_phy_config.reset_gpio = TEGRA_ULPI_RST;
+
 	platform_device_register(&tegra_ehci2_device);
 	platform_device_register(&tegra_ehci3_device);
 }
@@ -176,7 +181,6 @@ static __initdata struct tegra_clk_init_table paz00_clk_init_table[] = {
 	{ "uarta",	"pll_p",	216000000,	true },
 	{ "uartc",	"pll_p",	216000000,	true },
 
-	{ "pll_p_out4",	"pll_p",	24000000,	true },
 	{ "usbd",	"clk_m",	12000000,	false },
 	{ "usb2",	"clk_m",	12000000,	false },
 	{ "usb3",	"clk_m",	12000000,	false },
@@ -221,5 +225,6 @@ MACHINE_START(PAZ00, "Toshiba AC100 / Dynabook AZ")
 	.handle_irq	= gic_handle_irq,
 	.timer          = &tegra_timer,
 	.init_machine   = tegra_paz00_init,
+	.init_late	= tegra_init_late,
 	.restart	= tegra_assert_system_reset,
 MACHINE_END
diff --git a/arch/arm/mach-tegra/board-pinmux.c b/arch/arm/mach-tegra/board-pinmux.c
index adc3efe979b3..a5574c71b931 100644
--- a/arch/arm/mach-tegra/board-pinmux.c
+++ b/arch/arm/mach-tegra/board-pinmux.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2011, NVIDIA CORPORATION.  All rights reserved.
+ * Copyright (c) 2011,2012, NVIDIA CORPORATION.  All rights reserved.
  *
  * This software is licensed under the terms of the GNU General Public
  * License version 2, as published by the Free Software Foundation, and
@@ -15,75 +15,59 @@
 #include <linux/device.h>
 #include <linux/kernel.h>
 #include <linux/notifier.h>
-#include <linux/of.h>
 #include <linux/string.h>
 
-#include <mach/gpio-tegra.h>
-#include <mach/pinmux.h>
-
 #include "board-pinmux.h"
 #include "devices.h"
 
-struct tegra_board_pinmux_conf *confs[2];
-
-static void tegra_board_pinmux_setup_gpios(void)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(confs); i++) {
-		if (!confs[i])
-			continue;
-
-		tegra_gpio_config(confs[i]->gpios, confs[i]->gpio_count);
-	}
-}
-
-static void tegra_board_pinmux_setup_pinmux(void)
-{
-	int i;
+unsigned long tegra_pincfg_pullnone_driven[2] = {
+	TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_PULL, TEGRA_PINCONFIG_PULL_NONE),
+	TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_TRISTATE, TEGRA_PINCONFIG_DRIVEN),
+};
 
-	for (i = 0; i < ARRAY_SIZE(confs); i++) {
-		if (!confs[i])
-			continue;
+unsigned long tegra_pincfg_pullnone_tristate[2] = {
+	TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_PULL, TEGRA_PINCONFIG_PULL_NONE),
+	TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_TRISTATE, TEGRA_PINCONFIG_TRISTATE),
+};
 
-		tegra_pinmux_config_table(confs[i]->pgs, confs[i]->pg_count);
+unsigned long tegra_pincfg_pullnone_na[1] = {
+	TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_PULL, TEGRA_PINCONFIG_PULL_NONE),
+};
 
-		if (confs[i]->drives)
-			tegra_drive_pinmux_config_table(confs[i]->drives,
-							confs[i]->drive_count);
-	}
-}
+unsigned long tegra_pincfg_pullup_driven[2] = {
+	TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_PULL, TEGRA_PINCONFIG_PULL_UP),
+	TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_TRISTATE, TEGRA_PINCONFIG_DRIVEN),
+};
 
-static int tegra_board_pinmux_bus_notify(struct notifier_block *nb,
-					 unsigned long event, void *vdev)
-{
-	static bool had_gpio;
-	static bool had_pinmux;
+unsigned long tegra_pincfg_pullup_tristate[2] = {
+	TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_PULL, TEGRA_PINCONFIG_PULL_UP),
+	TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_TRISTATE, TEGRA_PINCONFIG_TRISTATE),
+};
 
-	struct device *dev = vdev;
-	const char *devname;
+unsigned long tegra_pincfg_pullup_na[1] = {
+	TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_PULL, TEGRA_PINCONFIG_PULL_UP),
+};
 
-	if (event != BUS_NOTIFY_BOUND_DRIVER)
-		return NOTIFY_DONE;
+unsigned long tegra_pincfg_pulldown_driven[2] = {
+	TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_PULL, TEGRA_PINCONFIG_PULL_DOWN),
+	TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_TRISTATE, TEGRA_PINCONFIG_DRIVEN),
+};
 
-	devname = dev_name(dev);
+unsigned long tegra_pincfg_pulldown_tristate[2] = {
+	TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_PULL, TEGRA_PINCONFIG_PULL_DOWN),
+	TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_TRISTATE, TEGRA_PINCONFIG_TRISTATE),
+};
 
-	if (!had_gpio && !strcmp(devname, GPIO_DEV)) {
-		tegra_board_pinmux_setup_gpios();
-		had_gpio = true;
-	} else if (!had_pinmux && !strcmp(devname, PINMUX_DEV)) {
-		tegra_board_pinmux_setup_pinmux();
-		had_pinmux = true;
-	}
+unsigned long tegra_pincfg_pulldown_na[1] = {
+	TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_PULL, TEGRA_PINCONFIG_PULL_DOWN),
+};
 
-	if (had_gpio && had_pinmux)
-		return NOTIFY_STOP_MASK;
-	else
-		return NOTIFY_DONE;
-}
+unsigned long tegra_pincfg_pullna_driven[1] = {
+	TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_TRISTATE, TEGRA_PINCONFIG_DRIVEN),
+};
 
-static struct notifier_block nb = {
-	.notifier_call = tegra_board_pinmux_bus_notify,
+unsigned long tegra_pincfg_pullna_tristate[1] = {
+	TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_TRISTATE, TEGRA_PINCONFIG_TRISTATE),
 };
 
 static struct platform_device *devices[] = {
@@ -94,11 +78,10 @@ static struct platform_device *devices[] = {
 void tegra_board_pinmux_init(struct tegra_board_pinmux_conf *conf_a,
 			     struct tegra_board_pinmux_conf *conf_b)
 {
-	confs[0] = conf_a;
-	confs[1] = conf_b;
-
-	bus_register_notifier(&platform_bus_type, &nb);
+	if (conf_a)
+		pinctrl_register_mappings(conf_a->maps, conf_a->map_count);
+	if (conf_b)
+		pinctrl_register_mappings(conf_b->maps, conf_b->map_count);
 
-	if (!of_machine_is_compatible("nvidia,tegra20"))
-		platform_add_devices(devices, ARRAY_SIZE(devices));
+	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
diff --git a/arch/arm/mach-tegra/board-pinmux.h b/arch/arm/mach-tegra/board-pinmux.h
index 4aac73546f54..c5f3f3381e86 100644
--- a/arch/arm/mach-tegra/board-pinmux.h
+++ b/arch/arm/mach-tegra/board-pinmux.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2011, NVIDIA CORPORATION.  All rights reserved.
+ * Copyright (c) 2011,2012, NVIDIA CORPORATION.  All rights reserved.
  *
  * This software is licensed under the terms of the GNU General Public
  * License version 2, as published by the Free Software Foundation, and
@@ -15,21 +15,37 @@
 #ifndef __MACH_TEGRA_BOARD_PINMUX_H
 #define __MACH_TEGRA_BOARD_PINMUX_H
 
-#define GPIO_DEV "tegra-gpio"
-#define PINMUX_DEV "tegra-pinmux"
+#include <linux/pinctrl/machine.h>
 
-struct tegra_pingroup_config;
-struct tegra_gpio_table;
+#include <mach/pinconf-tegra.h>
 
-struct tegra_board_pinmux_conf {
-	struct tegra_pingroup_config *pgs;
-	int pg_count;
+#define PINMUX_DEV "tegra20-pinctrl"
+
+#define TEGRA_MAP_MUX(_group_, _function_) \
+	PIN_MAP_MUX_GROUP_HOG_DEFAULT(PINMUX_DEV, _group_, _function_)
+
+#define TEGRA_MAP_CONF(_group_, _pull_, _drive_) \
+	PIN_MAP_CONFIGS_GROUP_HOG_DEFAULT(PINMUX_DEV, _group_, tegra_pincfg_pull##_pull_##_##_drive_)
 
-	struct tegra_drive_pingroup_config *drives;
-	int drive_count;
+#define TEGRA_MAP_MUXCONF(_group_, _function_, _pull_, _drive_) \
+	TEGRA_MAP_MUX(_group_, _function_), \
+	TEGRA_MAP_CONF(_group_, _pull_, _drive_)
 
-	struct tegra_gpio_table *gpios;
-	int gpio_count;
+extern unsigned long tegra_pincfg_pullnone_driven[2];
+extern unsigned long tegra_pincfg_pullnone_tristate[2];
+extern unsigned long tegra_pincfg_pullnone_na[1];
+extern unsigned long tegra_pincfg_pullup_driven[2];
+extern unsigned long tegra_pincfg_pullup_tristate[2];
+extern unsigned long tegra_pincfg_pullup_na[1];
+extern unsigned long tegra_pincfg_pulldown_driven[2];
+extern unsigned long tegra_pincfg_pulldown_tristate[2];
+extern unsigned long tegra_pincfg_pulldown_na[1];
+extern unsigned long tegra_pincfg_pullna_driven[1];
+extern unsigned long tegra_pincfg_pullna_tristate[1];
+
+struct tegra_board_pinmux_conf {
+	struct pinctrl_map *maps;
+	int map_count;
 };
 
 void tegra_board_pinmux_init(struct tegra_board_pinmux_conf *conf_a,
diff --git a/arch/arm/mach-tegra/board-seaboard-pinmux.c b/arch/arm/mach-tegra/board-seaboard-pinmux.c
index 55e7e43a14ad..11fc8a568c64 100644
--- a/arch/arm/mach-tegra/board-seaboard-pinmux.c
+++ b/arch/arm/mach-tegra/board-seaboard-pinmux.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2010,2011 NVIDIA Corporation
+ * Copyright (C) 2010-2012 NVIDIA Corporation
  * Copyright (C) 2011 Google, Inc.
  *
  * This software is licensed under the terms of the GNU General Public
@@ -14,216 +14,176 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/of.h>
 
-#include <mach/pinmux.h>
-#include <mach/pinmux-tegra20.h>
-
-#include "gpio-names.h"
-#include "board-pinmux.h"
 #include "board-seaboard.h"
+#include "board-pinmux.h"
 
-#define DEFAULT_DRIVE(_name)					\
-	{							\
-		.pingroup = TEGRA_DRIVE_PINGROUP_##_name,	\
-		.hsm = TEGRA_HSM_DISABLE,			\
-		.schmitt = TEGRA_SCHMITT_ENABLE,		\
-		.drive = TEGRA_DRIVE_DIV_1,			\
-		.pull_down = TEGRA_PULL_31,			\
-		.pull_up = TEGRA_PULL_31,			\
-		.slew_rising = TEGRA_SLEW_SLOWEST,		\
-		.slew_falling = TEGRA_SLEW_SLOWEST,		\
-	}
-
-static struct tegra_drive_pingroup_config seaboard_drive_pinmux[] = {
-	DEFAULT_DRIVE(SDIO1),
-};
-
-static struct tegra_pingroup_config common_pinmux[] = {
-	{TEGRA_PINGROUP_ATA,   TEGRA_MUX_IDE,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_ATB,   TEGRA_MUX_SDIO4,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_ATC,   TEGRA_MUX_NAND,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_ATD,   TEGRA_MUX_GMI,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_ATE,   TEGRA_MUX_GMI,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_CDEV1, TEGRA_MUX_PLLA_OUT,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_CDEV2, TEGRA_MUX_PLLP_OUT4,     TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_CRTP,  TEGRA_MUX_CRT,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_CSUS,  TEGRA_MUX_VI_SENSOR_CLK, TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_DAP1,  TEGRA_MUX_DAP1,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_DAP2,  TEGRA_MUX_DAP2,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_DAP3,  TEGRA_MUX_DAP3,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_DAP4,  TEGRA_MUX_DAP4,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_DTA,   TEGRA_MUX_VI,            TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_DTB,   TEGRA_MUX_VI,            TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_DTC,   TEGRA_MUX_VI,            TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_DTD,   TEGRA_MUX_VI,            TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_DTE,   TEGRA_MUX_VI,            TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_DTF,   TEGRA_MUX_I2C3,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_GMA,   TEGRA_MUX_SDIO4,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_GMB,   TEGRA_MUX_GMI,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_GMC,   TEGRA_MUX_UARTD,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_GME,   TEGRA_MUX_SDIO4,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_GPU,   TEGRA_MUX_PWM,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_GPU7,  TEGRA_MUX_RTCK,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_GPV,   TEGRA_MUX_PCIE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_HDINT, TEGRA_MUX_HDMI,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_I2CP,  TEGRA_MUX_I2C,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_IRRX,  TEGRA_MUX_UARTB,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_IRTX,  TEGRA_MUX_UARTB,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_KBCA,  TEGRA_MUX_KBC,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_KBCB,  TEGRA_MUX_KBC,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_KBCC,  TEGRA_MUX_KBC,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_KBCD,  TEGRA_MUX_KBC,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_KBCE,  TEGRA_MUX_KBC,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_KBCF,  TEGRA_MUX_KBC,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LCSN,  TEGRA_MUX_RSVD4,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LD0,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD1,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD10,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD11,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD12,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD13,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD14,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD15,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD16,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD17,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD2,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD3,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD4,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD5,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD6,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD7,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD8,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD9,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LDC,   TEGRA_MUX_RSVD4,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LDI,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LHP0,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LHP1,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LHP2,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LHS,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LM0,   TEGRA_MUX_RSVD4,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LM1,   TEGRA_MUX_CRT,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LPP,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LPW1,  TEGRA_MUX_RSVD4,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LSC0,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LSDI,  TEGRA_MUX_RSVD4,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LSPI,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LVP0,  TEGRA_MUX_RSVD4,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LVP1,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LVS,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_OWC,   TEGRA_MUX_RSVD2,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_PMC,   TEGRA_MUX_PWR_ON,        TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_RM,    TEGRA_MUX_I2C,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SDB,   TEGRA_MUX_SDIO3,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SDC,   TEGRA_MUX_SDIO3,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SDD,   TEGRA_MUX_SDIO3,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SDIO1, TEGRA_MUX_SDIO1,         TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SLXA,  TEGRA_MUX_PCIE,          TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SLXD,  TEGRA_MUX_SPDIF,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SPDI,  TEGRA_MUX_RSVD2,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SPDO,  TEGRA_MUX_RSVD2,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SPIB,  TEGRA_MUX_GMI,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SPID,  TEGRA_MUX_SPI1,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SPIE,  TEGRA_MUX_SPI1,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SPIF,  TEGRA_MUX_SPI1,          TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SPIH,  TEGRA_MUX_SPI2_ALT,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_UAA,   TEGRA_MUX_ULPI,          TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_UAB,   TEGRA_MUX_ULPI,          TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_UAC,   TEGRA_MUX_RSVD2,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_UAD,   TEGRA_MUX_IRDA,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_UCA,   TEGRA_MUX_UARTC,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_UCB,   TEGRA_MUX_UARTC,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_UDA,   TEGRA_MUX_ULPI,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_CK32,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_DDRC,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_PMCA,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_PMCB,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_PMCC,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_PMCD,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_PMCE,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_XM2C,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_XM2D,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-};
-
-static struct tegra_pingroup_config seaboard_pinmux[] = {
-	{TEGRA_PINGROUP_DDC,   TEGRA_MUX_RSVD2,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_GMD,   TEGRA_MUX_SFLASH,        TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LPW0,  TEGRA_MUX_HDMI,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LPW2,  TEGRA_MUX_HDMI,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LSC1,  TEGRA_MUX_HDMI,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LSCK,  TEGRA_MUX_HDMI,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LSDA,  TEGRA_MUX_HDMI,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_PTA,   TEGRA_MUX_HDMI,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SLXC,  TEGRA_MUX_SPDIF,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SLXK,  TEGRA_MUX_PCIE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SPIA,  TEGRA_MUX_GMI,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SPIC,  TEGRA_MUX_GMI,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SPIG,  TEGRA_MUX_SPI2_ALT,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-};
-
-static struct tegra_pingroup_config ventana_pinmux[] = {
-	{TEGRA_PINGROUP_DDC,  TEGRA_MUX_RSVD2,    TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_GMD,  TEGRA_MUX_SFLASH,   TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LPW0, TEGRA_MUX_RSVD4,    TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LPW2, TEGRA_MUX_RSVD4,    TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LSC1, TEGRA_MUX_RSVD4,    TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LSCK, TEGRA_MUX_RSVD4,    TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LSDA, TEGRA_MUX_RSVD4,    TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_PTA,  TEGRA_MUX_RSVD2,    TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SLXC, TEGRA_MUX_SDIO3,    TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SLXK, TEGRA_MUX_SDIO3,    TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SPIA, TEGRA_MUX_GMI,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SPIC, TEGRA_MUX_GMI,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SPIG, TEGRA_MUX_SPI2_ALT, TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
+static unsigned long seaboard_pincfg_drive_sdio1[] = {
+	TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_HIGH_SPEED_MODE, 0),
+	TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_SCHMITT, 0),
+	TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_LOW_POWER_MODE, 3),
+	TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_DRIVE_DOWN_STRENGTH, 31),
+	TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_DRIVE_UP_STRENGTH, 31),
+	TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_SLEW_RATE_FALLING, 3),
+	TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_SLEW_RATE_RISING, 3),
 };
 
-static struct tegra_gpio_table common_gpio_table[] = {
-	{ .gpio = TEGRA_GPIO_SD2_CD,		.enable = true },
-	{ .gpio = TEGRA_GPIO_SD2_WP,		.enable = true },
-	{ .gpio = TEGRA_GPIO_SD2_POWER,		.enable = true },
-	{ .gpio = TEGRA_GPIO_CDC_IRQ,		.enable = true },
+static struct pinctrl_map common_map[] = {
+	TEGRA_MAP_MUXCONF("ata",   "ide",           none, driven),
+	TEGRA_MAP_MUXCONF("atb",   "sdio4",         none, driven),
+	TEGRA_MAP_MUXCONF("atc",   "nand",          none, driven),
+	TEGRA_MAP_MUXCONF("atd",   "gmi",           none, driven),
+	TEGRA_MAP_MUXCONF("ate",   "gmi",           none, tristate),
+	TEGRA_MAP_MUXCONF("cdev1", "plla_out",      none, driven),
+	TEGRA_MAP_MUXCONF("cdev2", "pllp_out4",     none, driven),
+	TEGRA_MAP_MUXCONF("crtp",  "crt",           up,   tristate),
+	TEGRA_MAP_MUXCONF("csus",  "vi_sensor_clk", none, tristate),
+	TEGRA_MAP_MUXCONF("dap1",  "dap1",          none, driven),
+	TEGRA_MAP_MUXCONF("dap2",  "dap2",          none, driven),
+	TEGRA_MAP_MUXCONF("dap3",  "dap3",          none, tristate),
+	TEGRA_MAP_MUXCONF("dap4",  "dap4",          none, driven),
+	TEGRA_MAP_MUXCONF("dta",   "vi",            down, driven),
+	TEGRA_MAP_MUXCONF("dtb",   "vi",            down, driven),
+	TEGRA_MAP_MUXCONF("dtc",   "vi",            down, driven),
+	TEGRA_MAP_MUXCONF("dtd",   "vi",            down, driven),
+	TEGRA_MAP_MUXCONF("dte",   "vi",            down, tristate),
+	TEGRA_MAP_MUXCONF("dtf",   "i2c3",          none, driven),
+	TEGRA_MAP_MUXCONF("gma",   "sdio4",         none, driven),
+	TEGRA_MAP_MUXCONF("gmb",   "gmi",           up,   tristate),
+	TEGRA_MAP_MUXCONF("gmc",   "uartd",         none, driven),
+	TEGRA_MAP_MUXCONF("gme",   "sdio4",         none, driven),
+	TEGRA_MAP_MUXCONF("gpu",   "pwm",           none, driven),
+	TEGRA_MAP_MUXCONF("gpu7",  "rtck",          none, driven),
+	TEGRA_MAP_MUXCONF("gpv",   "pcie",          none, tristate),
+	TEGRA_MAP_MUXCONF("hdint", "hdmi",          na,   tristate),
+	TEGRA_MAP_MUXCONF("i2cp",  "i2cp",          none, driven),
+	TEGRA_MAP_MUXCONF("irrx",  "uartb",         none, driven),
+	TEGRA_MAP_MUXCONF("irtx",  "uartb",         none, driven),
+	TEGRA_MAP_MUXCONF("kbca",  "kbc",           up,   driven),
+	TEGRA_MAP_MUXCONF("kbcb",  "kbc",           up,   driven),
+	TEGRA_MAP_MUXCONF("kbcc",  "kbc",           up,   driven),
+	TEGRA_MAP_MUXCONF("kbcd",  "kbc",           up,   driven),
+	TEGRA_MAP_MUXCONF("kbce",  "kbc",           up,   driven),
+	TEGRA_MAP_MUXCONF("kbcf",  "kbc",           up,   driven),
+	TEGRA_MAP_MUXCONF("lcsn",  "rsvd4",         na,   tristate),
+	TEGRA_MAP_MUXCONF("ld0",   "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld1",   "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld10",  "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld11",  "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld12",  "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld13",  "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld14",  "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld15",  "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld16",  "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld17",  "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld2",   "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld3",   "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld4",   "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld5",   "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld6",   "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld7",   "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld8",   "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld9",   "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ldc",   "rsvd4",         na,   tristate),
+	TEGRA_MAP_MUXCONF("ldi",   "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("lhp0",  "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("lhp1",  "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("lhp2",  "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("lhs",   "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("lm0",   "rsvd4",         na,   driven),
+	TEGRA_MAP_MUXCONF("lm1",   "crt",           na,   tristate),
+	TEGRA_MAP_MUXCONF("lpp",   "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("lpw1",  "rsvd4",         na,   tristate),
+	TEGRA_MAP_MUXCONF("lsc0",  "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("lsdi",  "rsvd4",         na,   tristate),
+	TEGRA_MAP_MUXCONF("lspi",  "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("lvp0",  "rsvd4",         na,   tristate),
+	TEGRA_MAP_MUXCONF("lvp1",  "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("lvs",   "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("owc",   "rsvd2",         none, tristate),
+	TEGRA_MAP_MUXCONF("pmc",   "pwr_on",        na,   driven),
+	TEGRA_MAP_MUXCONF("pta",   "hdmi",          none, driven),
+	TEGRA_MAP_MUXCONF("rm",    "i2c1",          none, driven),
+	TEGRA_MAP_MUXCONF("sdb",   "sdio3",         na,   driven),
+	TEGRA_MAP_MUXCONF("sdc",   "sdio3",         none, driven),
+	TEGRA_MAP_MUXCONF("sdd",   "sdio3",         none, driven),
+	TEGRA_MAP_MUXCONF("sdio1", "sdio1",         up,   driven),
+	TEGRA_MAP_MUXCONF("slxa",  "pcie",          up,   tristate),
+	TEGRA_MAP_MUXCONF("slxd",  "spdif",         none, driven),
+	TEGRA_MAP_MUXCONF("slxk",  "pcie",          none, driven),
+	TEGRA_MAP_MUXCONF("spdi",  "rsvd2",         none, driven),
+	TEGRA_MAP_MUXCONF("spdo",  "rsvd2",         none, driven),
+	TEGRA_MAP_MUXCONF("spib",  "gmi",           none, tristate),
+	TEGRA_MAP_MUXCONF("spid",  "spi1",          none, tristate),
+	TEGRA_MAP_MUXCONF("spie",  "spi1",          none, tristate),
+	TEGRA_MAP_MUXCONF("spif",  "spi1",          down, tristate),
+	TEGRA_MAP_MUXCONF("spih",  "spi2_alt",      up,   tristate),
+	TEGRA_MAP_MUXCONF("uaa",   "ulpi",          up,   driven),
+	TEGRA_MAP_MUXCONF("uab",   "ulpi",          up,   driven),
+	TEGRA_MAP_MUXCONF("uac",   "rsvd2",         none, driven),
+	TEGRA_MAP_MUXCONF("uad",   "irda",          none, driven),
+	TEGRA_MAP_MUXCONF("uca",   "uartc",         none, driven),
+	TEGRA_MAP_MUXCONF("ucb",   "uartc",         none, driven),
+	TEGRA_MAP_MUXCONF("uda",   "ulpi",          none, driven),
+	TEGRA_MAP_CONF("ck32",    none, na),
+	TEGRA_MAP_CONF("ddrc",    none, na),
+	TEGRA_MAP_CONF("pmca",    none, na),
+	TEGRA_MAP_CONF("pmcb",    none, na),
+	TEGRA_MAP_CONF("pmcc",    none, na),
+	TEGRA_MAP_CONF("pmcd",    none, na),
+	TEGRA_MAP_CONF("pmce",    none, na),
+	TEGRA_MAP_CONF("xm2c",    none, na),
+	TEGRA_MAP_CONF("xm2d",    none, na),
+	TEGRA_MAP_CONF("ls",      up,   na),
+	TEGRA_MAP_CONF("lc",      up,   na),
+	TEGRA_MAP_CONF("ld17_0",  down, na),
+	TEGRA_MAP_CONF("ld19_18", down, na),
+	TEGRA_MAP_CONF("ld21_20", down, na),
+	TEGRA_MAP_CONF("ld23_22", down, na),
 };
 
-static struct tegra_gpio_table seaboard_gpio_table[] = {
-	{ .gpio = TEGRA_GPIO_LIDSWITCH,		.enable = true },
-	{ .gpio = TEGRA_GPIO_POWERKEY,		.enable = true },
-	{ .gpio = TEGRA_GPIO_HP_DET,		.enable = true },
-	{ .gpio = TEGRA_GPIO_ISL29018_IRQ,	.enable = true },
-	{ .gpio = TEGRA_GPIO_USB1,		.enable = true },
+static struct pinctrl_map seaboard_map[] = {
+	TEGRA_MAP_MUXCONF("ddc",   "rsvd2",         none, tristate),
+	TEGRA_MAP_MUXCONF("gmd",   "sflash",        none, driven),
+	TEGRA_MAP_MUXCONF("lpw0",  "hdmi",          na,   driven),
+	TEGRA_MAP_MUXCONF("lpw2",  "hdmi",          na,   driven),
+	TEGRA_MAP_MUXCONF("lsc1",  "hdmi",          na,   tristate),
+	TEGRA_MAP_MUXCONF("lsck",  "hdmi",          na,   tristate),
+	TEGRA_MAP_MUXCONF("lsda",  "hdmi",          na,   tristate),
+	TEGRA_MAP_MUXCONF("slxc",  "spdif",         none, tristate),
+	TEGRA_MAP_MUXCONF("spia",  "gmi",           up,   tristate),
+	TEGRA_MAP_MUXCONF("spic",  "gmi",           up,   driven),
+	TEGRA_MAP_MUXCONF("spig",  "spi2_alt",      up,   tristate),
+	PIN_MAP_CONFIGS_GROUP_HOG_DEFAULT(PINMUX_DEV, "drive_sdio1", seaboard_pincfg_drive_sdio1),
 };
 
-static struct tegra_gpio_table ventana_gpio_table[] = {
-	/* hp_det */
-	{ .gpio = TEGRA_GPIO_PW2,		.enable = true },
-	/* int_mic_en */
-	{ .gpio = TEGRA_GPIO_PX0,		.enable = true },
-	/* ext_mic_en */
-	{ .gpio = TEGRA_GPIO_PX1,		.enable = true },
+static struct pinctrl_map ventana_map[] = {
+	TEGRA_MAP_MUXCONF("ddc",   "rsvd2",         none, driven),
+	TEGRA_MAP_MUXCONF("gmd",   "sflash",        none, tristate),
+	TEGRA_MAP_MUXCONF("lpw0",  "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("lpw2",  "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("lsc1",  "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("lsck",  "displaya",      na,   tristate),
+	TEGRA_MAP_MUXCONF("lsda",  "displaya",      na,   tristate),
+	TEGRA_MAP_MUXCONF("slxc",  "sdio3",         none, driven),
+	TEGRA_MAP_MUXCONF("spia",  "gmi",           none, tristate),
+	TEGRA_MAP_MUXCONF("spic",  "gmi",           none, tristate),
+	TEGRA_MAP_MUXCONF("spig",  "spi2_alt",      none, tristate),
 };
 
 static struct tegra_board_pinmux_conf common_conf = {
-	.pgs = common_pinmux,
-	.pg_count = ARRAY_SIZE(common_pinmux),
-	.gpios = common_gpio_table,
-	.gpio_count = ARRAY_SIZE(common_gpio_table),
+	.maps = common_map,
+	.map_count = ARRAY_SIZE(common_map),
 };
 
 static struct tegra_board_pinmux_conf seaboard_conf = {
-	.pgs = seaboard_pinmux,
-	.pg_count = ARRAY_SIZE(seaboard_pinmux),
-	.drives = seaboard_drive_pinmux,
-	.drive_count = ARRAY_SIZE(seaboard_drive_pinmux),
-	.gpios = seaboard_gpio_table,
-	.gpio_count = ARRAY_SIZE(seaboard_gpio_table),
+	.maps = seaboard_map,
+	.map_count = ARRAY_SIZE(seaboard_map),
 };
 
 static struct tegra_board_pinmux_conf ventana_conf = {
-	.pgs = ventana_pinmux,
-	.pg_count = ARRAY_SIZE(ventana_pinmux),
-	.gpios = ventana_gpio_table,
-	.gpio_count = ARRAY_SIZE(ventana_gpio_table),
+	.maps = ventana_map,
+	.map_count = ARRAY_SIZE(ventana_map),
 };
 
 void seaboard_pinmux_init(void)
diff --git a/arch/arm/mach-tegra/board-seaboard.c b/arch/arm/mach-tegra/board-seaboard.c
index d669847f0485..71e9f3fc7fba 100644
--- a/arch/arm/mach-tegra/board-seaboard.c
+++ b/arch/arm/mach-tegra/board-seaboard.c
@@ -18,12 +18,14 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/serial_8250.h>
+#include <linux/of_serial.h>
 #include <linux/i2c.h>
 #include <linux/delay.h>
 #include <linux/input.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
 #include <linux/gpio_keys.h>
+#include <linux/platform_data/tegra_usb.h>
 
 #include <sound/wm8903.h>
 
@@ -47,6 +49,7 @@ static struct plat_serial8250_port debug_uart_platform_data[] = {
 		/* Memory and IRQ filled in before registration */
 		.flags		= UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
 		.type		= PORT_TEGRA,
+		.handle_break	= tegra_serial_handle_break,
 		.iotype		= UPIO_MEM,
 		.regshift	= 2,
 		.uartclk	= 216000000,
@@ -153,7 +156,6 @@ static struct platform_device *seaboard_devices[] __initdata = {
 	&seaboard_gpio_keys_device,
 	&tegra_i2s_device1,
 	&tegra_das_device,
-	&tegra_pcm_device,
 	&seaboard_audio_device,
 };
 
@@ -186,20 +188,10 @@ static struct i2c_board_info __initdata wm8903_device = {
 
 static int seaboard_ehci_init(void)
 {
-	int gpio_status;
+	struct tegra_ehci_platform_data *pdata;
 
-	gpio_status = gpio_request(TEGRA_GPIO_USB1, "VBUS_USB1");
-	if (gpio_status < 0) {
-		pr_err("VBUS_USB1 request GPIO FAILED\n");
-		WARN_ON(1);
-	}
-
-	gpio_status = gpio_direction_output(TEGRA_GPIO_USB1, 1);
-	if (gpio_status < 0) {
-		pr_err("VBUS_USB1 request GPIO DIRECTION FAILED\n");
-		WARN_ON(1);
-	}
-	gpio_set_value(TEGRA_GPIO_USB1, 1);
+	pdata = tegra_ehci1_device.dev.platform_data;
+	pdata->vbus_gpio = TEGRA_GPIO_USB1;
 
 	platform_device_register(&tegra_ehci1_device);
 	platform_device_register(&tegra_ehci3_device);
@@ -209,9 +201,6 @@ static int seaboard_ehci_init(void)
 
 static void __init seaboard_i2c_init(void)
 {
-	gpio_request(TEGRA_GPIO_ISL29018_IRQ, "isl29018");
-	gpio_direction_input(TEGRA_GPIO_ISL29018_IRQ);
-
 	isl29018_device.irq = gpio_to_irq(TEGRA_GPIO_ISL29018_IRQ);
 	i2c_register_board_info(0, &isl29018_device, 1);
 
@@ -261,7 +250,6 @@ static void __init tegra_kaen_init(void)
 	debug_uart_platform_data[0].irq = INT_UARTB;
 
 	seaboard_audio_pdata.gpio_hp_mute = TEGRA_GPIO_KAEN_HP_MUTE;
-	tegra_gpio_enable(TEGRA_GPIO_KAEN_HP_MUTE);
 
 	seaboard_common_init();
 
@@ -289,6 +277,7 @@ MACHINE_START(SEABOARD, "seaboard")
 	.handle_irq	= gic_handle_irq,
 	.timer          = &tegra_timer,
 	.init_machine   = tegra_seaboard_init,
+	.init_late	= tegra_init_late,
 	.restart	= tegra_assert_system_reset,
 MACHINE_END
 
@@ -300,6 +289,7 @@ MACHINE_START(KAEN, "kaen")
 	.handle_irq	= gic_handle_irq,
 	.timer          = &tegra_timer,
 	.init_machine   = tegra_kaen_init,
+	.init_late	= tegra_init_late,
 	.restart	= tegra_assert_system_reset,
 MACHINE_END
 
@@ -311,5 +301,6 @@ MACHINE_START(WARIO, "wario")
 	.handle_irq	= gic_handle_irq,
 	.timer          = &tegra_timer,
 	.init_machine   = tegra_wario_init,
+	.init_late	= tegra_init_late,
 	.restart	= tegra_assert_system_reset,
 MACHINE_END
diff --git a/arch/arm/mach-tegra/board-trimslice-pinmux.c b/arch/arm/mach-tegra/board-trimslice-pinmux.c
index a21a2be57cb6..7b39511c0d4d 100644
--- a/arch/arm/mach-tegra/board-trimslice-pinmux.c
+++ b/arch/arm/mach-tegra/board-trimslice-pinmux.c
@@ -2,6 +2,7 @@
  * arch/arm/mach-tegra/board-trimslice-pinmux.c
  *
  * Copyright (C) 2011 CompuLab, Ltd.
+ * Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
  *
  * This software is licensed under the terms of the GNU General Public
  * License version 2, as published by the Free Software Foundation, and
@@ -13,150 +14,139 @@
  * GNU General Public License for more details.
  *
  */
-#include <linux/gpio.h>
 #include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/of.h>
 
-#include <mach/pinmux.h>
-#include <mach/pinmux-tegra20.h>
-
-#include "gpio-names.h"
-#include "board-pinmux.h"
 #include "board-trimslice.h"
+#include "board-pinmux.h"
 
-static struct tegra_pingroup_config trimslice_pinmux[] = {
-	{TEGRA_PINGROUP_ATA,   TEGRA_MUX_IDE,           TEGRA_PUPD_NORMAL,	TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_ATB,   TEGRA_MUX_SDIO4,         TEGRA_PUPD_NORMAL,	TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_ATC,   TEGRA_MUX_NAND,          TEGRA_PUPD_NORMAL,	TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_ATD,   TEGRA_MUX_GMI,           TEGRA_PUPD_NORMAL,	TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_ATE,   TEGRA_MUX_GMI,           TEGRA_PUPD_NORMAL,	TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_CDEV1, TEGRA_MUX_PLLA_OUT,      TEGRA_PUPD_NORMAL,      TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_CDEV2, TEGRA_MUX_PLLP_OUT4,     TEGRA_PUPD_PULL_DOWN,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_CRTP,  TEGRA_MUX_CRT,           TEGRA_PUPD_NORMAL,      TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_CSUS,  TEGRA_MUX_VI_SENSOR_CLK, TEGRA_PUPD_PULL_DOWN,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_DAP1,  TEGRA_MUX_DAP1,          TEGRA_PUPD_NORMAL,      TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_DAP2,  TEGRA_MUX_DAP2,          TEGRA_PUPD_NORMAL,      TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_DAP3,  TEGRA_MUX_DAP3,          TEGRA_PUPD_NORMAL,      TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_DAP4,  TEGRA_MUX_DAP4,          TEGRA_PUPD_NORMAL,      TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_DDC,   TEGRA_MUX_I2C2,          TEGRA_PUPD_PULL_UP,     TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_DTA,   TEGRA_MUX_VI,            TEGRA_PUPD_NORMAL,      TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_DTB,   TEGRA_MUX_VI,            TEGRA_PUPD_NORMAL,      TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_DTC,   TEGRA_MUX_VI,            TEGRA_PUPD_NORMAL,      TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_DTD,   TEGRA_MUX_VI,            TEGRA_PUPD_NORMAL,      TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_DTE,   TEGRA_MUX_VI,            TEGRA_PUPD_NORMAL,      TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_DTF,   TEGRA_MUX_I2C3,          TEGRA_PUPD_PULL_UP,     TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_GMA,   TEGRA_MUX_SDIO4,         TEGRA_PUPD_NORMAL,      TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_GMB,   TEGRA_MUX_NAND,          TEGRA_PUPD_NORMAL,      TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_GMC,   TEGRA_MUX_SFLASH,        TEGRA_PUPD_NORMAL,      TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_GMD,   TEGRA_MUX_SFLASH,        TEGRA_PUPD_NORMAL,      TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_GME,   TEGRA_MUX_GMI,           TEGRA_PUPD_NORMAL,      TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_GPU,   TEGRA_MUX_UARTA,         TEGRA_PUPD_NORMAL,      TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_GPU7,  TEGRA_MUX_RTCK,          TEGRA_PUPD_NORMAL,      TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_GPV,   TEGRA_MUX_PCIE,          TEGRA_PUPD_NORMAL,      TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_HDINT, TEGRA_MUX_HDMI,          TEGRA_PUPD_PULL_UP,     TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_I2CP,  TEGRA_MUX_I2C,           TEGRA_PUPD_NORMAL,      TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_IRRX,  TEGRA_MUX_UARTB,         TEGRA_PUPD_PULL_UP,     TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_IRTX,  TEGRA_MUX_UARTB,         TEGRA_PUPD_PULL_UP,     TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_KBCA,  TEGRA_MUX_KBC,           TEGRA_PUPD_PULL_UP,     TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_KBCB,  TEGRA_MUX_KBC,           TEGRA_PUPD_PULL_UP,     TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_KBCC,  TEGRA_MUX_KBC,           TEGRA_PUPD_PULL_UP,     TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_KBCD,  TEGRA_MUX_KBC,           TEGRA_PUPD_PULL_UP,     TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_KBCE,  TEGRA_MUX_KBC,           TEGRA_PUPD_PULL_UP,     TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_KBCF,  TEGRA_MUX_KBC,           TEGRA_PUPD_PULL_UP,     TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LCSN,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,     TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LD0,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD1,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD2,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD3,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD4,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD5,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD6,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD7,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD8,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD9,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD10,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD11,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD12,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD13,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD14,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD15,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD16,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD17,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LDC,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,     TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LDI,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LHP0,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LHP1,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LHP2,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LHS,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,     TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LM0,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,     TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LM1,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,     TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LPP,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LPW0,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,     TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LPW1,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,     TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LPW2,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,     TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LSC0,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,     TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LSC1,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,     TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LSCK,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,     TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LSDA,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,     TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LSDI,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,     TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LSPI,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,     TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LVP0,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,     TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LVP1,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LVS,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,     TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_OWC,   TEGRA_MUX_RSVD2,         TEGRA_PUPD_PULL_UP,     TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_PMC,   TEGRA_MUX_PWR_ON,        TEGRA_PUPD_NORMAL,      TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_PTA,   TEGRA_MUX_GMI,           TEGRA_PUPD_NORMAL,      TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_RM,    TEGRA_MUX_I2C,           TEGRA_PUPD_PULL_UP,     TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SDB,   TEGRA_MUX_PWM,           TEGRA_PUPD_NORMAL,      TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SDC,   TEGRA_MUX_PWM,           TEGRA_PUPD_PULL_UP,     TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SDD,   TEGRA_MUX_PWM,           TEGRA_PUPD_PULL_UP,     TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SDIO1, TEGRA_MUX_SDIO1,         TEGRA_PUPD_NORMAL,      TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SLXA,  TEGRA_MUX_PCIE,          TEGRA_PUPD_NORMAL,      TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SLXC,  TEGRA_MUX_SDIO3,         TEGRA_PUPD_NORMAL,      TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SLXD,  TEGRA_MUX_SDIO3,         TEGRA_PUPD_NORMAL,      TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SLXK,  TEGRA_MUX_PCIE,          TEGRA_PUPD_NORMAL,      TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SPDI,  TEGRA_MUX_SPDIF,         TEGRA_PUPD_NORMAL,      TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SPDO,  TEGRA_MUX_SPDIF,         TEGRA_PUPD_NORMAL,      TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SPIA,  TEGRA_MUX_SPI2,          TEGRA_PUPD_PULL_DOWN,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SPIB,  TEGRA_MUX_SPI2,          TEGRA_PUPD_PULL_DOWN,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SPIC,  TEGRA_MUX_SPI2,          TEGRA_PUPD_PULL_UP,     TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SPID,  TEGRA_MUX_SPI1,          TEGRA_PUPD_PULL_DOWN,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SPIE,  TEGRA_MUX_SPI1,          TEGRA_PUPD_PULL_UP,     TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SPIF,  TEGRA_MUX_SPI1,          TEGRA_PUPD_PULL_DOWN,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SPIG,  TEGRA_MUX_SPI2_ALT,      TEGRA_PUPD_PULL_UP,     TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SPIH,  TEGRA_MUX_SPI2_ALT,      TEGRA_PUPD_PULL_UP,     TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_UAA,   TEGRA_MUX_ULPI,          TEGRA_PUPD_PULL_UP,     TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_UAB,   TEGRA_MUX_ULPI,          TEGRA_PUPD_PULL_UP,     TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_UAC,   TEGRA_MUX_RSVD2,         TEGRA_PUPD_NORMAL,      TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_UAD,   TEGRA_MUX_IRDA,          TEGRA_PUPD_PULL_UP,     TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_UCA,   TEGRA_MUX_UARTC,         TEGRA_PUPD_PULL_UP,     TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_UCB,   TEGRA_MUX_UARTC,         TEGRA_PUPD_PULL_UP,     TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_UDA,   TEGRA_MUX_ULPI,          TEGRA_PUPD_NORMAL,      TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_CK32,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,      TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_DDRC,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,      TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_PMCA,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,      TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_PMCB,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,      TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_PMCC,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,      TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_PMCD,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,      TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_PMCE,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,      TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_XM2C,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,      TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_XM2D,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,      TEGRA_TRI_NORMAL},
-};
-
-static struct tegra_gpio_table gpio_table[] = {
-	{ .gpio = TRIMSLICE_GPIO_SD4_CD, .enable = true	}, /* mmc4 cd */
-	{ .gpio = TRIMSLICE_GPIO_SD4_WP, .enable = true	}, /* mmc4 wp */
-
-	{ .gpio = TRIMSLICE_GPIO_USB1_MODE, .enable = true }, /* USB1 mode */
-	{ .gpio = TRIMSLICE_GPIO_USB2_RST,  .enable = true }, /* USB2 PHY rst */
+static struct pinctrl_map trimslice_map[] = {
+	TEGRA_MAP_MUXCONF("ata",   "ide",           none, tristate),
+	TEGRA_MAP_MUXCONF("atb",   "sdio4",         none, driven),
+	TEGRA_MAP_MUXCONF("atc",   "nand",          none, tristate),
+	TEGRA_MAP_MUXCONF("atd",   "gmi",           none, tristate),
+	TEGRA_MAP_MUXCONF("ate",   "gmi",           none, tristate),
+	TEGRA_MAP_MUXCONF("cdev1", "plla_out",      none, driven),
+	TEGRA_MAP_MUXCONF("cdev2", "pllp_out4",     down, tristate),
+	TEGRA_MAP_MUXCONF("crtp",  "crt",           none, tristate),
+	TEGRA_MAP_MUXCONF("csus",  "vi_sensor_clk", down, tristate),
+	TEGRA_MAP_MUXCONF("dap1",  "dap1",          none, driven),
+	TEGRA_MAP_MUXCONF("dap2",  "dap2",          none, tristate),
+	TEGRA_MAP_MUXCONF("dap3",  "dap3",          none, tristate),
+	TEGRA_MAP_MUXCONF("dap4",  "dap4",          none, tristate),
+	TEGRA_MAP_MUXCONF("ddc",   "i2c2",          up,   driven),
+	TEGRA_MAP_MUXCONF("dta",   "vi",            none, tristate),
+	TEGRA_MAP_MUXCONF("dtb",   "vi",            none, tristate),
+	TEGRA_MAP_MUXCONF("dtc",   "vi",            none, tristate),
+	TEGRA_MAP_MUXCONF("dtd",   "vi",            none, tristate),
+	TEGRA_MAP_MUXCONF("dte",   "vi",            none, tristate),
+	TEGRA_MAP_MUXCONF("dtf",   "i2c3",          up,   driven),
+	TEGRA_MAP_MUXCONF("gma",   "sdio4",         none, driven),
+	TEGRA_MAP_MUXCONF("gmb",   "nand",          none, tristate),
+	TEGRA_MAP_MUXCONF("gmc",   "sflash",        none, driven),
+	TEGRA_MAP_MUXCONF("gmd",   "sflash",        none, driven),
+	TEGRA_MAP_MUXCONF("gme",   "gmi",           none, tristate),
+	TEGRA_MAP_MUXCONF("gpu",   "uarta",         none, driven),
+	TEGRA_MAP_MUXCONF("gpu7",  "rtck",          none, driven),
+	TEGRA_MAP_MUXCONF("gpv",   "pcie",          none, driven),
+	TEGRA_MAP_MUXCONF("hdint", "hdmi",          na,   tristate),
+	TEGRA_MAP_MUXCONF("i2cp",  "i2cp",          none, tristate),
+	TEGRA_MAP_MUXCONF("irrx",  "uartb",         up,   tristate),
+	TEGRA_MAP_MUXCONF("irtx",  "uartb",         up,   tristate),
+	TEGRA_MAP_MUXCONF("kbca",  "kbc",           up,   tristate),
+	TEGRA_MAP_MUXCONF("kbcb",  "kbc",           up,   tristate),
+	TEGRA_MAP_MUXCONF("kbcc",  "kbc",           up,   tristate),
+	TEGRA_MAP_MUXCONF("kbcd",  "kbc",           up,   tristate),
+	TEGRA_MAP_MUXCONF("kbce",  "kbc",           up,   tristate),
+	TEGRA_MAP_MUXCONF("kbcf",  "kbc",           up,   tristate),
+	TEGRA_MAP_MUXCONF("lcsn",  "displaya",      na,   tristate),
+	TEGRA_MAP_MUXCONF("ld0",   "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld1",   "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld10",  "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld11",  "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld12",  "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld13",  "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld14",  "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld15",  "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld16",  "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld17",  "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld2",   "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld3",   "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld4",   "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld5",   "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld6",   "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld7",   "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld8",   "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ld9",   "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("ldc",   "displaya",      na,   tristate),
+	TEGRA_MAP_MUXCONF("ldi",   "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("lhp0",  "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("lhp1",  "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("lhp2",  "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("lhs",   "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("lm0",   "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("lm1",   "displaya",      na,   tristate),
+	TEGRA_MAP_MUXCONF("lpp",   "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("lpw0",  "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("lpw1",  "displaya",      na,   tristate),
+	TEGRA_MAP_MUXCONF("lpw2",  "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("lsc0",  "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("lsc1",  "displaya",      na,   tristate),
+	TEGRA_MAP_MUXCONF("lsck",  "displaya",      na,   tristate),
+	TEGRA_MAP_MUXCONF("lsda",  "displaya",      na,   tristate),
+	TEGRA_MAP_MUXCONF("lsdi",  "displaya",      na,   tristate),
+	TEGRA_MAP_MUXCONF("lspi",  "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("lvp0",  "displaya",      na,   tristate),
+	TEGRA_MAP_MUXCONF("lvp1",  "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("lvs",   "displaya",      na,   driven),
+	TEGRA_MAP_MUXCONF("owc",   "rsvd2",         up,   tristate),
+	TEGRA_MAP_MUXCONF("pmc",   "pwr_on",        na,   tristate),
+	TEGRA_MAP_MUXCONF("pta",   "gmi",           none, tristate),
+	TEGRA_MAP_MUXCONF("rm",    "i2c1",          up,   driven),
+	TEGRA_MAP_MUXCONF("sdb",   "pwm",           na,   driven),
+	TEGRA_MAP_MUXCONF("sdc",   "pwm",           up,   driven),
+	TEGRA_MAP_MUXCONF("sdd",   "pwm",           up,   driven),
+	TEGRA_MAP_MUXCONF("sdio1", "sdio1",         none, driven),
+	TEGRA_MAP_MUXCONF("slxa",  "pcie",          none, driven),
+	TEGRA_MAP_MUXCONF("slxc",  "sdio3",         none, tristate),
+	TEGRA_MAP_MUXCONF("slxd",  "sdio3",         none, tristate),
+	TEGRA_MAP_MUXCONF("slxk",  "pcie",          none, driven),
+	TEGRA_MAP_MUXCONF("spdi",  "spdif",         none, tristate),
+	TEGRA_MAP_MUXCONF("spdo",  "spdif",         none, tristate),
+	TEGRA_MAP_MUXCONF("spia",  "spi2",          down, tristate),
+	TEGRA_MAP_MUXCONF("spib",  "spi2",          down, tristate),
+	TEGRA_MAP_MUXCONF("spic",  "spi2",          up,   tristate),
+	TEGRA_MAP_MUXCONF("spid",  "spi1",          down, tristate),
+	TEGRA_MAP_MUXCONF("spie",  "spi1",          up,   tristate),
+	TEGRA_MAP_MUXCONF("spif",  "spi1",          down, tristate),
+	TEGRA_MAP_MUXCONF("spig",  "spi2_alt",      up,   tristate),
+	TEGRA_MAP_MUXCONF("spih",  "spi2_alt",      up,   tristate),
+	TEGRA_MAP_MUXCONF("uaa",   "ulpi",          up,   tristate),
+	TEGRA_MAP_MUXCONF("uab",   "ulpi",          up,   tristate),
+	TEGRA_MAP_MUXCONF("uac",   "rsvd2",         none, driven),
+	TEGRA_MAP_MUXCONF("uad",   "irda",          up,   tristate),
+	TEGRA_MAP_MUXCONF("uca",   "uartc",         up,   tristate),
+	TEGRA_MAP_MUXCONF("ucb",   "uartc",         up,   tristate),
+	TEGRA_MAP_MUXCONF("uda",   "ulpi",          none, tristate),
+	TEGRA_MAP_CONF("ck32",    none, na),
+	TEGRA_MAP_CONF("ddrc",    none, na),
+	TEGRA_MAP_CONF("pmca",    none, na),
+	TEGRA_MAP_CONF("pmcb",    none, na),
+	TEGRA_MAP_CONF("pmcc",    none, na),
+	TEGRA_MAP_CONF("pmcd",    none, na),
+	TEGRA_MAP_CONF("pmce",    none, na),
+	TEGRA_MAP_CONF("xm2c",    none, na),
+	TEGRA_MAP_CONF("xm2d",    none, na),
+	TEGRA_MAP_CONF("ls",      up,   na),
+	TEGRA_MAP_CONF("lc",      up,   na),
+	TEGRA_MAP_CONF("ld17_0",  down, na),
+	TEGRA_MAP_CONF("ld19_18", down, na),
+	TEGRA_MAP_CONF("ld21_20", down, na),
+	TEGRA_MAP_CONF("ld23_22", down, na),
 };
 
 static struct tegra_board_pinmux_conf conf = {
-	.pgs = trimslice_pinmux,
-	.pg_count = ARRAY_SIZE(trimslice_pinmux),
-	.gpios = gpio_table,
-	.gpio_count = ARRAY_SIZE(gpio_table),
+	.maps = trimslice_map,
+	.map_count = ARRAY_SIZE(trimslice_map),
 };
 
 void trimslice_pinmux_init(void)
diff --git a/arch/arm/mach-tegra/board-trimslice.c b/arch/arm/mach-tegra/board-trimslice.c
index cd52820a3e37..776aa9564d5d 100644
--- a/arch/arm/mach-tegra/board-trimslice.c
+++ b/arch/arm/mach-tegra/board-trimslice.c
@@ -22,9 +22,11 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/serial_8250.h>
+#include <linux/of_serial.h>
 #include <linux/io.h>
 #include <linux/i2c.h>
 #include <linux/gpio.h>
+#include <linux/platform_data/tegra_usb.h>
 
 #include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
@@ -48,6 +50,7 @@ static struct plat_serial8250_port debug_uart_platform_data[] = {
 		.irq		= INT_UARTA,
 		.flags		= UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
 		.type		= PORT_TEGRA,
+		.handle_break	= tegra_serial_handle_break,
 		.iotype		= UPIO_MEM,
 		.regshift	= 2,
 		.uartclk	= 216000000,
@@ -86,7 +89,6 @@ static struct platform_device *trimslice_devices[] __initdata = {
 	&tegra_sdhci_device4,
 	&tegra_i2s_device1,
 	&tegra_das_device,
-	&tegra_pcm_device,
 	&trimslice_audio_device,
 };
 
@@ -111,19 +113,15 @@ static void trimslice_i2c_init(void)
 
 static void trimslice_usb_init(void)
 {
-	int err;
+	struct tegra_ehci_platform_data *pdata;
 
-	platform_device_register(&tegra_ehci3_device);
-
-	platform_device_register(&tegra_ehci2_device);
+	pdata = tegra_ehci1_device.dev.platform_data;
+	pdata->vbus_gpio = TRIMSLICE_GPIO_USB1_MODE;
 
-	err = gpio_request_one(TRIMSLICE_GPIO_USB1_MODE, GPIOF_OUT_INIT_HIGH,
-			       "usb1mode");
-	if (err) {
-		pr_err("TrimSlice: failed to obtain USB1 mode gpio: %d\n", err);
-		return;
-	}
+	tegra_ehci2_ulpi_phy_config.reset_gpio = TEGRA_GPIO_PV0;
 
+	platform_device_register(&tegra_ehci3_device);
+	platform_device_register(&tegra_ehci2_device);
 	platform_device_register(&tegra_ehci1_device);
 }
 
@@ -180,5 +178,6 @@ MACHINE_START(TRIMSLICE, "trimslice")
 	.handle_irq	= gic_handle_irq,
 	.timer          = &tegra_timer,
 	.init_machine   = tegra_trimslice_init,
+	.init_late	= tegra_init_late,
 	.restart	= tegra_assert_system_reset,
 MACHINE_END
diff --git a/arch/arm/mach-tegra/board.h b/arch/arm/mach-tegra/board.h
index 75d1543d77c0..65014968fc6c 100644
--- a/arch/arm/mach-tegra/board.h
+++ b/arch/arm/mach-tegra/board.h
@@ -32,5 +32,19 @@ void __init tegra_init_irq(void);
 void __init tegra_dt_init_irq(void);
 int __init tegra_pcie_init(bool init_port0, bool init_port1);
 
+void tegra_init_late(void);
+
+#ifdef CONFIG_DEBUG_FS
+int tegra_clk_debugfs_init(void);
+#else
+static inline int tegra_clk_debugfs_init(void) { return 0; }
+#endif
+
+#if defined(CONFIG_ARCH_TEGRA_2x_SOC) && defined(CONFIG_DEBUG_FS)
+int __init tegra_powergate_debugfs_init(void);
+#else
+static inline int tegra_powergate_debugfs_init(void) { return 0; }
+#endif
+
 extern struct sys_timer tegra_timer;
 #endif
diff --git a/arch/arm/mach-tegra/clock.c b/arch/arm/mach-tegra/clock.c
index 8dad8d18cb49..58f981c0819c 100644
--- a/arch/arm/mach-tegra/clock.c
+++ b/arch/arm/mach-tegra/clock.c
@@ -642,7 +642,7 @@ static int clk_debugfs_register(struct clk *c)
 	return 0;
 }
 
-static int __init clk_debugfs_init(void)
+int __init tegra_clk_debugfs_init(void)
 {
 	struct clk *c;
 	struct dentry *d;
@@ -669,5 +669,4 @@ err_out:
 	return err;
 }
 
-late_initcall(clk_debugfs_init);
 #endif
diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c
index 22df10fb9972..204a5c8b0b57 100644
--- a/arch/arm/mach-tegra/common.c
+++ b/arch/arm/mach-tegra/common.c
@@ -82,10 +82,12 @@ static __initdata struct tegra_clk_init_table tegra20_clk_init_table[] = {
 	{ "pll_p_out1",	"pll_p",	28800000,	true },
 	{ "pll_p_out2",	"pll_p",	48000000,	true },
 	{ "pll_p_out3",	"pll_p",	72000000,	true },
-	{ "pll_p_out4",	"pll_p",	108000000,	true },
-	{ "sclk",	"pll_p_out4",	108000000,	true },
-	{ "hclk",	"sclk",		108000000,	true },
-	{ "pclk",	"hclk",		54000000,	true },
+	{ "pll_p_out4",	"pll_p",	24000000,	true },
+	{ "pll_c",	"clk_m",	600000000,	true },
+	{ "pll_c_out1",	"pll_c",	120000000,	true },
+	{ "sclk",	"pll_c_out1",	120000000,	true },
+	{ "hclk",	"sclk",		120000000,	true },
+	{ "pclk",	"hclk",		60000000,	true },
 	{ "csite",	NULL,		0,		true },
 	{ "emc",	NULL,		0,		true },
 	{ "cpu",	NULL,		0,		true },
@@ -93,6 +95,17 @@ static __initdata struct tegra_clk_init_table tegra20_clk_init_table[] = {
 };
 #endif
 
+#ifdef CONFIG_ARCH_TEGRA_3x_SOC
+static __initdata struct tegra_clk_init_table tegra30_clk_init_table[] = {
+	/* name		parent		rate		enabled */
+	{ "clk_m",	NULL,		0,		true },
+	{ "pll_p",	"clk_m",	408000000,	true },
+	{ "pll_p_out1",	"pll_p",	9600000,	true },
+	{ NULL,		NULL,		0,		0},
+};
+#endif
+
+
 static void __init tegra_init_cache(u32 tag_latency, u32 data_latency)
 {
 #ifdef CONFIG_CACHE_L2X0
@@ -127,8 +140,15 @@ void __init tegra30_init_early(void)
 {
 	tegra_init_fuse();
 	tegra30_init_clocks();
+	tegra_clk_init_from_table(tegra30_clk_init_table);
 	tegra_init_cache(0x441, 0x551);
 	tegra_pmc_init();
 	tegra_powergate_init();
 }
 #endif
+
+void __init tegra_init_late(void)
+{
+	tegra_clk_debugfs_init();
+	tegra_powergate_debugfs_init();
+}
diff --git a/arch/arm/mach-tegra/devices.c b/arch/arm/mach-tegra/devices.c
index 5f6b867e20b4..c70e65ffa36b 100644
--- a/arch/arm/mach-tegra/devices.c
+++ b/arch/arm/mach-tegra/devices.c
@@ -110,7 +110,7 @@ static struct resource pinmux_resource[] = {
 };
 
 struct platform_device tegra_pinmux_device = {
-	.name		= "tegra-pinmux",
+	.name		= "tegra20-pinctrl",
 	.id		= -1,
 	.resource	= pinmux_resource,
 	.num_resources	= ARRAY_SIZE(pinmux_resource),
@@ -439,26 +439,28 @@ static struct resource tegra_usb3_resources[] = {
 	},
 };
 
-static struct tegra_ulpi_config tegra_ehci2_ulpi_phy_config = {
-	/* All existing boards use GPIO PV0 for phy reset */
-	.reset_gpio = TEGRA_GPIO_PV0,
+struct tegra_ulpi_config tegra_ehci2_ulpi_phy_config = {
+	.reset_gpio = -1,
 	.clk = "cdev2",
 };
 
 struct tegra_ehci_platform_data tegra_ehci1_pdata = {
 	.operating_mode = TEGRA_USB_OTG,
 	.power_down_on_bus_suspend = 1,
+	.vbus_gpio = -1,
 };
 
 struct tegra_ehci_platform_data tegra_ehci2_pdata = {
 	.phy_config = &tegra_ehci2_ulpi_phy_config,
 	.operating_mode = TEGRA_USB_HOST,
 	.power_down_on_bus_suspend = 1,
+	.vbus_gpio = -1,
 };
 
 struct tegra_ehci_platform_data tegra_ehci3_pdata = {
 	.operating_mode = TEGRA_USB_HOST,
 	.power_down_on_bus_suspend = 1,
+	.vbus_gpio = -1,
 };
 
 static u64 tegra_ehci_dmamask = DMA_BIT_MASK(32);
@@ -671,14 +673,14 @@ static struct resource i2s_resource2[] = {
 };
 
 struct platform_device tegra_i2s_device1 = {
-	.name		= "tegra-i2s",
+	.name		= "tegra20-i2s",
 	.id		= 0,
 	.resource	= i2s_resource1,
 	.num_resources	= ARRAY_SIZE(i2s_resource1),
 };
 
 struct platform_device tegra_i2s_device2 = {
-	.name		= "tegra-i2s",
+	.name		= "tegra20-i2s",
 	.id		= 1,
 	.resource	= i2s_resource2,
 	.num_resources	= ARRAY_SIZE(i2s_resource2),
@@ -693,13 +695,8 @@ static struct resource tegra_das_resources[] = {
 };
 
 struct platform_device tegra_das_device = {
-	.name		= "tegra-das",
+	.name		= "tegra20-das",
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(tegra_das_resources),
 	.resource	= tegra_das_resources,
 };
-
-struct platform_device tegra_pcm_device = {
-	.name = "tegra-pcm-audio",
-	.id = -1,
-};
diff --git a/arch/arm/mach-tegra/devices.h b/arch/arm/mach-tegra/devices.h
index ec455679b219..4f5052726495 100644
--- a/arch/arm/mach-tegra/devices.h
+++ b/arch/arm/mach-tegra/devices.h
@@ -22,6 +22,10 @@
 #include <linux/platform_device.h>
 #include <linux/platform_data/tegra_usb.h>
 
+#include <mach/usb_phy.h>
+
+extern struct tegra_ulpi_config tegra_ehci2_ulpi_phy_config;
+
 extern struct tegra_ehci_platform_data tegra_ehci1_pdata;
 extern struct tegra_ehci_platform_data tegra_ehci2_pdata;
 extern struct tegra_ehci_platform_data tegra_ehci3_pdata;
@@ -52,6 +56,5 @@ extern struct platform_device tegra_pmu_device;
 extern struct platform_device tegra_i2s_device1;
 extern struct platform_device tegra_i2s_device2;
 extern struct platform_device tegra_das_device;
-extern struct platform_device tegra_pcm_device;
 
 #endif
diff --git a/arch/arm/mach-tegra/flowctrl.c b/arch/arm/mach-tegra/flowctrl.c
index fef66a7486ed..f07488e0bd32 100644
--- a/arch/arm/mach-tegra/flowctrl.c
+++ b/arch/arm/mach-tegra/flowctrl.c
@@ -53,10 +53,10 @@ static void flowctrl_update(u8 offset, u32 value)
 
 void flowctrl_write_cpu_csr(unsigned int cpuid, u32 value)
 {
-	return flowctrl_update(flowctrl_offset_halt_cpu[cpuid], value);
+	return flowctrl_update(flowctrl_offset_cpu_csr[cpuid], value);
 }
 
 void flowctrl_write_cpu_halt(unsigned int cpuid, u32 value)
 {
-	return flowctrl_update(flowctrl_offset_cpu_csr[cpuid], value);
+	return flowctrl_update(flowctrl_offset_halt_cpu[cpuid], value);
 }
diff --git a/arch/arm/mach-tegra/include/mach/dma.h b/arch/arm/mach-tegra/include/mach/dma.h
index 3c9339058bec..9077092812c0 100644
--- a/arch/arm/mach-tegra/include/mach/dma.h
+++ b/arch/arm/mach-tegra/include/mach/dma.h
@@ -51,8 +51,6 @@
 #define TEGRA_DMA_REQ_SEL_OWR			25
 #define TEGRA_DMA_REQ_SEL_INVALID		31
 
-#if defined(CONFIG_TEGRA_SYSTEM_DMA)
-
 struct tegra_dma_req;
 struct tegra_dma_channel;
 
@@ -151,5 +149,3 @@ void tegra_dma_free_channel(struct tegra_dma_channel *ch);
 int __init tegra_dma_init(void);
 
 #endif
-
-#endif
diff --git a/arch/arm/mach-tegra/include/mach/gpio-tegra.h b/arch/arm/mach-tegra/include/mach/gpio-tegra.h
index 6140820555e1..a978b3cc3a8d 100644
--- a/arch/arm/mach-tegra/include/mach/gpio-tegra.h
+++ b/arch/arm/mach-tegra/include/mach/gpio-tegra.h
@@ -25,13 +25,4 @@
 
 #define TEGRA_NR_GPIOS		INT_GPIO_NR
 
-struct tegra_gpio_table {
-	int	gpio;	/* GPIO number */
-	bool	enable;	/* Enable for GPIO at init? */
-};
-
-void tegra_gpio_config(struct tegra_gpio_table *table, int num);
-void tegra_gpio_enable(int gpio);
-void tegra_gpio_disable(int gpio);
-
 #endif
diff --git a/arch/arm/mach-tegra/include/mach/pinmux-tegra20.h b/arch/arm/mach-tegra/include/mach/pinmux-tegra20.h
deleted file mode 100644
index 6a40c1dbab17..000000000000
--- a/arch/arm/mach-tegra/include/mach/pinmux-tegra20.h
+++ /dev/null
@@ -1,184 +0,0 @@
-/*
- * linux/arch/arm/mach-tegra/include/mach/pinmux-tegra20.h
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __MACH_TEGRA_PINMUX_TEGRA20_H
-#define __MACH_TEGRA_PINMUX_TEGRA20_H
-
-enum tegra_pingroup {
-	TEGRA_PINGROUP_ATA = 0,
-	TEGRA_PINGROUP_ATB,
-	TEGRA_PINGROUP_ATC,
-	TEGRA_PINGROUP_ATD,
-	TEGRA_PINGROUP_ATE,
-	TEGRA_PINGROUP_CDEV1,
-	TEGRA_PINGROUP_CDEV2,
-	TEGRA_PINGROUP_CRTP,
-	TEGRA_PINGROUP_CSUS,
-	TEGRA_PINGROUP_DAP1,
-	TEGRA_PINGROUP_DAP2,
-	TEGRA_PINGROUP_DAP3,
-	TEGRA_PINGROUP_DAP4,
-	TEGRA_PINGROUP_DDC,
-	TEGRA_PINGROUP_DTA,
-	TEGRA_PINGROUP_DTB,
-	TEGRA_PINGROUP_DTC,
-	TEGRA_PINGROUP_DTD,
-	TEGRA_PINGROUP_DTE,
-	TEGRA_PINGROUP_DTF,
-	TEGRA_PINGROUP_GMA,
-	TEGRA_PINGROUP_GMB,
-	TEGRA_PINGROUP_GMC,
-	TEGRA_PINGROUP_GMD,
-	TEGRA_PINGROUP_GME,
-	TEGRA_PINGROUP_GPU,
-	TEGRA_PINGROUP_GPU7,
-	TEGRA_PINGROUP_GPV,
-	TEGRA_PINGROUP_HDINT,
-	TEGRA_PINGROUP_I2CP,
-	TEGRA_PINGROUP_IRRX,
-	TEGRA_PINGROUP_IRTX,
-	TEGRA_PINGROUP_KBCA,
-	TEGRA_PINGROUP_KBCB,
-	TEGRA_PINGROUP_KBCC,
-	TEGRA_PINGROUP_KBCD,
-	TEGRA_PINGROUP_KBCE,
-	TEGRA_PINGROUP_KBCF,
-	TEGRA_PINGROUP_LCSN,
-	TEGRA_PINGROUP_LD0,
-	TEGRA_PINGROUP_LD1,
-	TEGRA_PINGROUP_LD10,
-	TEGRA_PINGROUP_LD11,
-	TEGRA_PINGROUP_LD12,
-	TEGRA_PINGROUP_LD13,
-	TEGRA_PINGROUP_LD14,
-	TEGRA_PINGROUP_LD15,
-	TEGRA_PINGROUP_LD16,
-	TEGRA_PINGROUP_LD17,
-	TEGRA_PINGROUP_LD2,
-	TEGRA_PINGROUP_LD3,
-	TEGRA_PINGROUP_LD4,
-	TEGRA_PINGROUP_LD5,
-	TEGRA_PINGROUP_LD6,
-	TEGRA_PINGROUP_LD7,
-	TEGRA_PINGROUP_LD8,
-	TEGRA_PINGROUP_LD9,
-	TEGRA_PINGROUP_LDC,
-	TEGRA_PINGROUP_LDI,
-	TEGRA_PINGROUP_LHP0,
-	TEGRA_PINGROUP_LHP1,
-	TEGRA_PINGROUP_LHP2,
-	TEGRA_PINGROUP_LHS,
-	TEGRA_PINGROUP_LM0,
-	TEGRA_PINGROUP_LM1,
-	TEGRA_PINGROUP_LPP,
-	TEGRA_PINGROUP_LPW0,
-	TEGRA_PINGROUP_LPW1,
-	TEGRA_PINGROUP_LPW2,
-	TEGRA_PINGROUP_LSC0,
-	TEGRA_PINGROUP_LSC1,
-	TEGRA_PINGROUP_LSCK,
-	TEGRA_PINGROUP_LSDA,
-	TEGRA_PINGROUP_LSDI,
-	TEGRA_PINGROUP_LSPI,
-	TEGRA_PINGROUP_LVP0,
-	TEGRA_PINGROUP_LVP1,
-	TEGRA_PINGROUP_LVS,
-	TEGRA_PINGROUP_OWC,
-	TEGRA_PINGROUP_PMC,
-	TEGRA_PINGROUP_PTA,
-	TEGRA_PINGROUP_RM,
-	TEGRA_PINGROUP_SDB,
-	TEGRA_PINGROUP_SDC,
-	TEGRA_PINGROUP_SDD,
-	TEGRA_PINGROUP_SDIO1,
-	TEGRA_PINGROUP_SLXA,
-	TEGRA_PINGROUP_SLXC,
-	TEGRA_PINGROUP_SLXD,
-	TEGRA_PINGROUP_SLXK,
-	TEGRA_PINGROUP_SPDI,
-	TEGRA_PINGROUP_SPDO,
-	TEGRA_PINGROUP_SPIA,
-	TEGRA_PINGROUP_SPIB,
-	TEGRA_PINGROUP_SPIC,
-	TEGRA_PINGROUP_SPID,
-	TEGRA_PINGROUP_SPIE,
-	TEGRA_PINGROUP_SPIF,
-	TEGRA_PINGROUP_SPIG,
-	TEGRA_PINGROUP_SPIH,
-	TEGRA_PINGROUP_UAA,
-	TEGRA_PINGROUP_UAB,
-	TEGRA_PINGROUP_UAC,
-	TEGRA_PINGROUP_UAD,
-	TEGRA_PINGROUP_UCA,
-	TEGRA_PINGROUP_UCB,
-	TEGRA_PINGROUP_UDA,
-	/* these pin groups only have pullup and pull down control */
-	TEGRA_PINGROUP_CK32,
-	TEGRA_PINGROUP_DDRC,
-	TEGRA_PINGROUP_PMCA,
-	TEGRA_PINGROUP_PMCB,
-	TEGRA_PINGROUP_PMCC,
-	TEGRA_PINGROUP_PMCD,
-	TEGRA_PINGROUP_PMCE,
-	TEGRA_PINGROUP_XM2C,
-	TEGRA_PINGROUP_XM2D,
-	TEGRA_MAX_PINGROUP,
-};
-
-enum tegra_drive_pingroup {
-	TEGRA_DRIVE_PINGROUP_AO1 = 0,
-	TEGRA_DRIVE_PINGROUP_AO2,
-	TEGRA_DRIVE_PINGROUP_AT1,
-	TEGRA_DRIVE_PINGROUP_AT2,
-	TEGRA_DRIVE_PINGROUP_CDEV1,
-	TEGRA_DRIVE_PINGROUP_CDEV2,
-	TEGRA_DRIVE_PINGROUP_CSUS,
-	TEGRA_DRIVE_PINGROUP_DAP1,
-	TEGRA_DRIVE_PINGROUP_DAP2,
-	TEGRA_DRIVE_PINGROUP_DAP3,
-	TEGRA_DRIVE_PINGROUP_DAP4,
-	TEGRA_DRIVE_PINGROUP_DBG,
-	TEGRA_DRIVE_PINGROUP_LCD1,
-	TEGRA_DRIVE_PINGROUP_LCD2,
-	TEGRA_DRIVE_PINGROUP_SDMMC2,
-	TEGRA_DRIVE_PINGROUP_SDMMC3,
-	TEGRA_DRIVE_PINGROUP_SPI,
-	TEGRA_DRIVE_PINGROUP_UAA,
-	TEGRA_DRIVE_PINGROUP_UAB,
-	TEGRA_DRIVE_PINGROUP_UART2,
-	TEGRA_DRIVE_PINGROUP_UART3,
-	TEGRA_DRIVE_PINGROUP_VI1,
-	TEGRA_DRIVE_PINGROUP_VI2,
-	TEGRA_DRIVE_PINGROUP_XM2A,
-	TEGRA_DRIVE_PINGROUP_XM2C,
-	TEGRA_DRIVE_PINGROUP_XM2D,
-	TEGRA_DRIVE_PINGROUP_XM2CLK,
-	TEGRA_DRIVE_PINGROUP_MEMCOMP,
-	TEGRA_DRIVE_PINGROUP_SDIO1,
-	TEGRA_DRIVE_PINGROUP_CRT,
-	TEGRA_DRIVE_PINGROUP_DDC,
-	TEGRA_DRIVE_PINGROUP_GMA,
-	TEGRA_DRIVE_PINGROUP_GMB,
-	TEGRA_DRIVE_PINGROUP_GMC,
-	TEGRA_DRIVE_PINGROUP_GMD,
-	TEGRA_DRIVE_PINGROUP_GME,
-	TEGRA_DRIVE_PINGROUP_OWR,
-	TEGRA_DRIVE_PINGROUP_UAD,
-	TEGRA_MAX_DRIVE_PINGROUP,
-};
-
-#endif
-
diff --git a/arch/arm/mach-tegra/include/mach/pinmux-tegra30.h b/arch/arm/mach-tegra/include/mach/pinmux-tegra30.h
deleted file mode 100644
index c1aee3eb2df1..000000000000
--- a/arch/arm/mach-tegra/include/mach/pinmux-tegra30.h
+++ /dev/null
@@ -1,320 +0,0 @@
-/*
- * linux/arch/arm/mach-tegra/include/mach/pinmux-tegra30.h
- *
- * Copyright (C) 2010 Google, Inc.
- * Copyright (C) 2010,2011 Nvidia, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __MACH_TEGRA_PINMUX_TEGRA30_H
-#define __MACH_TEGRA_PINMUX_TEGRA30_H
-
-enum tegra_pingroup {
-	TEGRA_PINGROUP_ULPI_DATA0 = 0,
-	TEGRA_PINGROUP_ULPI_DATA1,
-	TEGRA_PINGROUP_ULPI_DATA2,
-	TEGRA_PINGROUP_ULPI_DATA3,
-	TEGRA_PINGROUP_ULPI_DATA4,
-	TEGRA_PINGROUP_ULPI_DATA5,
-	TEGRA_PINGROUP_ULPI_DATA6,
-	TEGRA_PINGROUP_ULPI_DATA7,
-	TEGRA_PINGROUP_ULPI_CLK,
-	TEGRA_PINGROUP_ULPI_DIR,
-	TEGRA_PINGROUP_ULPI_NXT,
-	TEGRA_PINGROUP_ULPI_STP,
-	TEGRA_PINGROUP_DAP3_FS,
-	TEGRA_PINGROUP_DAP3_DIN,
-	TEGRA_PINGROUP_DAP3_DOUT,
-	TEGRA_PINGROUP_DAP3_SCLK,
-	TEGRA_PINGROUP_GPIO_PV0,
-	TEGRA_PINGROUP_GPIO_PV1,
-	TEGRA_PINGROUP_SDMMC1_CLK,
-	TEGRA_PINGROUP_SDMMC1_CMD,
-	TEGRA_PINGROUP_SDMMC1_DAT3,
-	TEGRA_PINGROUP_SDMMC1_DAT2,
-	TEGRA_PINGROUP_SDMMC1_DAT1,
-	TEGRA_PINGROUP_SDMMC1_DAT0,
-	TEGRA_PINGROUP_GPIO_PV2,
-	TEGRA_PINGROUP_GPIO_PV3,
-	TEGRA_PINGROUP_CLK2_OUT,
-	TEGRA_PINGROUP_CLK2_REQ,
-	TEGRA_PINGROUP_LCD_PWR1,
-	TEGRA_PINGROUP_LCD_PWR2,
-	TEGRA_PINGROUP_LCD_SDIN,
-	TEGRA_PINGROUP_LCD_SDOUT,
-	TEGRA_PINGROUP_LCD_WR_N,
-	TEGRA_PINGROUP_LCD_CS0_N,
-	TEGRA_PINGROUP_LCD_DC0,
-	TEGRA_PINGROUP_LCD_SCK,
-	TEGRA_PINGROUP_LCD_PWR0,
-	TEGRA_PINGROUP_LCD_PCLK,
-	TEGRA_PINGROUP_LCD_DE,
-	TEGRA_PINGROUP_LCD_HSYNC,
-	TEGRA_PINGROUP_LCD_VSYNC,
-	TEGRA_PINGROUP_LCD_D0,
-	TEGRA_PINGROUP_LCD_D1,
-	TEGRA_PINGROUP_LCD_D2,
-	TEGRA_PINGROUP_LCD_D3,
-	TEGRA_PINGROUP_LCD_D4,
-	TEGRA_PINGROUP_LCD_D5,
-	TEGRA_PINGROUP_LCD_D6,
-	TEGRA_PINGROUP_LCD_D7,
-	TEGRA_PINGROUP_LCD_D8,
-	TEGRA_PINGROUP_LCD_D9,
-	TEGRA_PINGROUP_LCD_D10,
-	TEGRA_PINGROUP_LCD_D11,
-	TEGRA_PINGROUP_LCD_D12,
-	TEGRA_PINGROUP_LCD_D13,
-	TEGRA_PINGROUP_LCD_D14,
-	TEGRA_PINGROUP_LCD_D15,
-	TEGRA_PINGROUP_LCD_D16,
-	TEGRA_PINGROUP_LCD_D17,
-	TEGRA_PINGROUP_LCD_D18,
-	TEGRA_PINGROUP_LCD_D19,
-	TEGRA_PINGROUP_LCD_D20,
-	TEGRA_PINGROUP_LCD_D21,
-	TEGRA_PINGROUP_LCD_D22,
-	TEGRA_PINGROUP_LCD_D23,
-	TEGRA_PINGROUP_LCD_CS1_N,
-	TEGRA_PINGROUP_LCD_M1,
-	TEGRA_PINGROUP_LCD_DC1,
-	TEGRA_PINGROUP_HDMI_INT,
-	TEGRA_PINGROUP_DDC_SCL,
-	TEGRA_PINGROUP_DDC_SDA,
-	TEGRA_PINGROUP_CRT_HSYNC,
-	TEGRA_PINGROUP_CRT_VSYNC,
-	TEGRA_PINGROUP_VI_D0,
-	TEGRA_PINGROUP_VI_D1,
-	TEGRA_PINGROUP_VI_D2,
-	TEGRA_PINGROUP_VI_D3,
-	TEGRA_PINGROUP_VI_D4,
-	TEGRA_PINGROUP_VI_D5,
-	TEGRA_PINGROUP_VI_D6,
-	TEGRA_PINGROUP_VI_D7,
-	TEGRA_PINGROUP_VI_D8,
-	TEGRA_PINGROUP_VI_D9,
-	TEGRA_PINGROUP_VI_D10,
-	TEGRA_PINGROUP_VI_D11,
-	TEGRA_PINGROUP_VI_PCLK,
-	TEGRA_PINGROUP_VI_MCLK,
-	TEGRA_PINGROUP_VI_VSYNC,
-	TEGRA_PINGROUP_VI_HSYNC,
-	TEGRA_PINGROUP_UART2_RXD,
-	TEGRA_PINGROUP_UART2_TXD,
-	TEGRA_PINGROUP_UART2_RTS_N,
-	TEGRA_PINGROUP_UART2_CTS_N,
-	TEGRA_PINGROUP_UART3_TXD,
-	TEGRA_PINGROUP_UART3_RXD,
-	TEGRA_PINGROUP_UART3_CTS_N,
-	TEGRA_PINGROUP_UART3_RTS_N,
-	TEGRA_PINGROUP_GPIO_PU0,
-	TEGRA_PINGROUP_GPIO_PU1,
-	TEGRA_PINGROUP_GPIO_PU2,
-	TEGRA_PINGROUP_GPIO_PU3,
-	TEGRA_PINGROUP_GPIO_PU4,
-	TEGRA_PINGROUP_GPIO_PU5,
-	TEGRA_PINGROUP_GPIO_PU6,
-	TEGRA_PINGROUP_GEN1_I2C_SDA,
-	TEGRA_PINGROUP_GEN1_I2C_SCL,
-	TEGRA_PINGROUP_DAP4_FS,
-	TEGRA_PINGROUP_DAP4_DIN,
-	TEGRA_PINGROUP_DAP4_DOUT,
-	TEGRA_PINGROUP_DAP4_SCLK,
-	TEGRA_PINGROUP_CLK3_OUT,
-	TEGRA_PINGROUP_CLK3_REQ,
-	TEGRA_PINGROUP_GMI_WP_N,
-	TEGRA_PINGROUP_GMI_IORDY,
-	TEGRA_PINGROUP_GMI_WAIT,
-	TEGRA_PINGROUP_GMI_ADV_N,
-	TEGRA_PINGROUP_GMI_CLK,
-	TEGRA_PINGROUP_GMI_CS0_N,
-	TEGRA_PINGROUP_GMI_CS1_N,
-	TEGRA_PINGROUP_GMI_CS2_N,
-	TEGRA_PINGROUP_GMI_CS3_N,
-	TEGRA_PINGROUP_GMI_CS4_N,
-	TEGRA_PINGROUP_GMI_CS6_N,
-	TEGRA_PINGROUP_GMI_CS7_N,
-	TEGRA_PINGROUP_GMI_AD0,
-	TEGRA_PINGROUP_GMI_AD1,
-	TEGRA_PINGROUP_GMI_AD2,
-	TEGRA_PINGROUP_GMI_AD3,
-	TEGRA_PINGROUP_GMI_AD4,
-	TEGRA_PINGROUP_GMI_AD5,
-	TEGRA_PINGROUP_GMI_AD6,
-	TEGRA_PINGROUP_GMI_AD7,
-	TEGRA_PINGROUP_GMI_AD8,
-	TEGRA_PINGROUP_GMI_AD9,
-	TEGRA_PINGROUP_GMI_AD10,
-	TEGRA_PINGROUP_GMI_AD11,
-	TEGRA_PINGROUP_GMI_AD12,
-	TEGRA_PINGROUP_GMI_AD13,
-	TEGRA_PINGROUP_GMI_AD14,
-	TEGRA_PINGROUP_GMI_AD15,
-	TEGRA_PINGROUP_GMI_A16,
-	TEGRA_PINGROUP_GMI_A17,
-	TEGRA_PINGROUP_GMI_A18,
-	TEGRA_PINGROUP_GMI_A19,
-	TEGRA_PINGROUP_GMI_WR_N,
-	TEGRA_PINGROUP_GMI_OE_N,
-	TEGRA_PINGROUP_GMI_DQS,
-	TEGRA_PINGROUP_GMI_RST_N,
-	TEGRA_PINGROUP_GEN2_I2C_SCL,
-	TEGRA_PINGROUP_GEN2_I2C_SDA,
-	TEGRA_PINGROUP_SDMMC4_CLK,
-	TEGRA_PINGROUP_SDMMC4_CMD,
-	TEGRA_PINGROUP_SDMMC4_DAT0,
-	TEGRA_PINGROUP_SDMMC4_DAT1,
-	TEGRA_PINGROUP_SDMMC4_DAT2,
-	TEGRA_PINGROUP_SDMMC4_DAT3,
-	TEGRA_PINGROUP_SDMMC4_DAT4,
-	TEGRA_PINGROUP_SDMMC4_DAT5,
-	TEGRA_PINGROUP_SDMMC4_DAT6,
-	TEGRA_PINGROUP_SDMMC4_DAT7,
-	TEGRA_PINGROUP_SDMMC4_RST_N,
-	TEGRA_PINGROUP_CAM_MCLK,
-	TEGRA_PINGROUP_GPIO_PCC1,
-	TEGRA_PINGROUP_GPIO_PBB0,
-	TEGRA_PINGROUP_CAM_I2C_SCL,
-	TEGRA_PINGROUP_CAM_I2C_SDA,
-	TEGRA_PINGROUP_GPIO_PBB3,
-	TEGRA_PINGROUP_GPIO_PBB4,
-	TEGRA_PINGROUP_GPIO_PBB5,
-	TEGRA_PINGROUP_GPIO_PBB6,
-	TEGRA_PINGROUP_GPIO_PBB7,
-	TEGRA_PINGROUP_GPIO_PCC2,
-	TEGRA_PINGROUP_JTAG_RTCK,
-	TEGRA_PINGROUP_PWR_I2C_SCL,
-	TEGRA_PINGROUP_PWR_I2C_SDA,
-	TEGRA_PINGROUP_KB_ROW0,
-	TEGRA_PINGROUP_KB_ROW1,
-	TEGRA_PINGROUP_KB_ROW2,
-	TEGRA_PINGROUP_KB_ROW3,
-	TEGRA_PINGROUP_KB_ROW4,
-	TEGRA_PINGROUP_KB_ROW5,
-	TEGRA_PINGROUP_KB_ROW6,
-	TEGRA_PINGROUP_KB_ROW7,
-	TEGRA_PINGROUP_KB_ROW8,
-	TEGRA_PINGROUP_KB_ROW9,
-	TEGRA_PINGROUP_KB_ROW10,
-	TEGRA_PINGROUP_KB_ROW11,
-	TEGRA_PINGROUP_KB_ROW12,
-	TEGRA_PINGROUP_KB_ROW13,
-	TEGRA_PINGROUP_KB_ROW14,
-	TEGRA_PINGROUP_KB_ROW15,
-	TEGRA_PINGROUP_KB_COL0,
-	TEGRA_PINGROUP_KB_COL1,
-	TEGRA_PINGROUP_KB_COL2,
-	TEGRA_PINGROUP_KB_COL3,
-	TEGRA_PINGROUP_KB_COL4,
-	TEGRA_PINGROUP_KB_COL5,
-	TEGRA_PINGROUP_KB_COL6,
-	TEGRA_PINGROUP_KB_COL7,
-	TEGRA_PINGROUP_CLK_32K_OUT,
-	TEGRA_PINGROUP_SYS_CLK_REQ,
-	TEGRA_PINGROUP_CORE_PWR_REQ,
-	TEGRA_PINGROUP_CPU_PWR_REQ,
-	TEGRA_PINGROUP_PWR_INT_N,
-	TEGRA_PINGROUP_CLK_32K_IN,
-	TEGRA_PINGROUP_OWR,
-	TEGRA_PINGROUP_DAP1_FS,
-	TEGRA_PINGROUP_DAP1_DIN,
-	TEGRA_PINGROUP_DAP1_DOUT,
-	TEGRA_PINGROUP_DAP1_SCLK,
-	TEGRA_PINGROUP_CLK1_REQ,
-	TEGRA_PINGROUP_CLK1_OUT,
-	TEGRA_PINGROUP_SPDIF_IN,
-	TEGRA_PINGROUP_SPDIF_OUT,
-	TEGRA_PINGROUP_DAP2_FS,
-	TEGRA_PINGROUP_DAP2_DIN,
-	TEGRA_PINGROUP_DAP2_DOUT,
-	TEGRA_PINGROUP_DAP2_SCLK,
-	TEGRA_PINGROUP_SPI2_MOSI,
-	TEGRA_PINGROUP_SPI2_MISO,
-	TEGRA_PINGROUP_SPI2_CS0_N,
-	TEGRA_PINGROUP_SPI2_SCK,
-	TEGRA_PINGROUP_SPI1_MOSI,
-	TEGRA_PINGROUP_SPI1_SCK,
-	TEGRA_PINGROUP_SPI1_CS0_N,
-	TEGRA_PINGROUP_SPI1_MISO,
-	TEGRA_PINGROUP_SPI2_CS1_N,
-	TEGRA_PINGROUP_SPI2_CS2_N,
-	TEGRA_PINGROUP_SDMMC3_CLK,
-	TEGRA_PINGROUP_SDMMC3_CMD,
-	TEGRA_PINGROUP_SDMMC3_DAT0,
-	TEGRA_PINGROUP_SDMMC3_DAT1,
-	TEGRA_PINGROUP_SDMMC3_DAT2,
-	TEGRA_PINGROUP_SDMMC3_DAT3,
-	TEGRA_PINGROUP_SDMMC3_DAT4,
-	TEGRA_PINGROUP_SDMMC3_DAT5,
-	TEGRA_PINGROUP_SDMMC3_DAT6,
-	TEGRA_PINGROUP_SDMMC3_DAT7,
-	TEGRA_PINGROUP_PEX_L0_PRSNT_N,
-	TEGRA_PINGROUP_PEX_L0_RST_N,
-	TEGRA_PINGROUP_PEX_L0_CLKREQ_N,
-	TEGRA_PINGROUP_PEX_WAKE_N,
-	TEGRA_PINGROUP_PEX_L1_PRSNT_N,
-	TEGRA_PINGROUP_PEX_L1_RST_N,
-	TEGRA_PINGROUP_PEX_L1_CLKREQ_N,
-	TEGRA_PINGROUP_PEX_L2_PRSNT_N,
-	TEGRA_PINGROUP_PEX_L2_RST_N,
-	TEGRA_PINGROUP_PEX_L2_CLKREQ_N,
-	TEGRA_PINGROUP_HDMI_CEC,
-	TEGRA_MAX_PINGROUP,
-};
-
-enum tegra_drive_pingroup {
-	TEGRA_DRIVE_PINGROUP_AO1 = 0,
-	TEGRA_DRIVE_PINGROUP_AO2,
-	TEGRA_DRIVE_PINGROUP_AT1,
-	TEGRA_DRIVE_PINGROUP_AT2,
-	TEGRA_DRIVE_PINGROUP_AT3,
-	TEGRA_DRIVE_PINGROUP_AT4,
-	TEGRA_DRIVE_PINGROUP_AT5,
-	TEGRA_DRIVE_PINGROUP_CDEV1,
-	TEGRA_DRIVE_PINGROUP_CDEV2,
-	TEGRA_DRIVE_PINGROUP_CSUS,
-	TEGRA_DRIVE_PINGROUP_DAP1,
-	TEGRA_DRIVE_PINGROUP_DAP2,
-	TEGRA_DRIVE_PINGROUP_DAP3,
-	TEGRA_DRIVE_PINGROUP_DAP4,
-	TEGRA_DRIVE_PINGROUP_DBG,
-	TEGRA_DRIVE_PINGROUP_LCD1,
-	TEGRA_DRIVE_PINGROUP_LCD2,
-	TEGRA_DRIVE_PINGROUP_SDIO2,
-	TEGRA_DRIVE_PINGROUP_SDIO3,
-	TEGRA_DRIVE_PINGROUP_SPI,
-	TEGRA_DRIVE_PINGROUP_UAA,
-	TEGRA_DRIVE_PINGROUP_UAB,
-	TEGRA_DRIVE_PINGROUP_UART2,
-	TEGRA_DRIVE_PINGROUP_UART3,
-	TEGRA_DRIVE_PINGROUP_VI1,
-	TEGRA_DRIVE_PINGROUP_SDIO1,
-	TEGRA_DRIVE_PINGROUP_CRT,
-	TEGRA_DRIVE_PINGROUP_DDC,
-	TEGRA_DRIVE_PINGROUP_GMA,
-	TEGRA_DRIVE_PINGROUP_GMB,
-	TEGRA_DRIVE_PINGROUP_GMC,
-	TEGRA_DRIVE_PINGROUP_GMD,
-	TEGRA_DRIVE_PINGROUP_GME,
-	TEGRA_DRIVE_PINGROUP_GMF,
-	TEGRA_DRIVE_PINGROUP_GMG,
-	TEGRA_DRIVE_PINGROUP_GMH,
-	TEGRA_DRIVE_PINGROUP_OWR,
-	TEGRA_DRIVE_PINGROUP_UAD,
-	TEGRA_DRIVE_PINGROUP_GPV,
-	TEGRA_DRIVE_PINGROUP_DEV3,
-	TEGRA_DRIVE_PINGROUP_CEC,
-	TEGRA_MAX_DRIVE_PINGROUP,
-};
-
-#endif
-
diff --git a/arch/arm/mach-tegra/include/mach/pinmux.h b/arch/arm/mach-tegra/include/mach/pinmux.h
deleted file mode 100644
index 055f1792c8ff..000000000000
--- a/arch/arm/mach-tegra/include/mach/pinmux.h
+++ /dev/null
@@ -1,302 +0,0 @@
-/*
- * linux/arch/arm/mach-tegra/include/mach/pinmux.h
- *
- * Copyright (C) 2010 Google, Inc.
- * Copyright (C) 2010,2011 Nvidia, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __MACH_TEGRA_PINMUX_H
-#define __MACH_TEGRA_PINMUX_H
-
-enum tegra_mux_func {
-	TEGRA_MUX_RSVD = 0x8000,
-	TEGRA_MUX_RSVD1 = 0x8000,
-	TEGRA_MUX_RSVD2 = 0x8001,
-	TEGRA_MUX_RSVD3 = 0x8002,
-	TEGRA_MUX_RSVD4 = 0x8003,
-	TEGRA_MUX_INVALID = 0x4000,
-	TEGRA_MUX_NONE = -1,
-	TEGRA_MUX_AHB_CLK,
-	TEGRA_MUX_APB_CLK,
-	TEGRA_MUX_AUDIO_SYNC,
-	TEGRA_MUX_CRT,
-	TEGRA_MUX_DAP1,
-	TEGRA_MUX_DAP2,
-	TEGRA_MUX_DAP3,
-	TEGRA_MUX_DAP4,
-	TEGRA_MUX_DAP5,
-	TEGRA_MUX_DISPLAYA,
-	TEGRA_MUX_DISPLAYB,
-	TEGRA_MUX_EMC_TEST0_DLL,
-	TEGRA_MUX_EMC_TEST1_DLL,
-	TEGRA_MUX_GMI,
-	TEGRA_MUX_GMI_INT,
-	TEGRA_MUX_HDMI,
-	TEGRA_MUX_I2C,
-	TEGRA_MUX_I2C2,
-	TEGRA_MUX_I2C3,
-	TEGRA_MUX_IDE,
-	TEGRA_MUX_IRDA,
-	TEGRA_MUX_KBC,
-	TEGRA_MUX_MIO,
-	TEGRA_MUX_MIPI_HS,
-	TEGRA_MUX_NAND,
-	TEGRA_MUX_OSC,
-	TEGRA_MUX_OWR,
-	TEGRA_MUX_PCIE,
-	TEGRA_MUX_PLLA_OUT,
-	TEGRA_MUX_PLLC_OUT1,
-	TEGRA_MUX_PLLM_OUT1,
-	TEGRA_MUX_PLLP_OUT2,
-	TEGRA_MUX_PLLP_OUT3,
-	TEGRA_MUX_PLLP_OUT4,
-	TEGRA_MUX_PWM,
-	TEGRA_MUX_PWR_INTR,
-	TEGRA_MUX_PWR_ON,
-	TEGRA_MUX_RTCK,
-	TEGRA_MUX_SDIO1,
-	TEGRA_MUX_SDIO2,
-	TEGRA_MUX_SDIO3,
-	TEGRA_MUX_SDIO4,
-	TEGRA_MUX_SFLASH,
-	TEGRA_MUX_SPDIF,
-	TEGRA_MUX_SPI1,
-	TEGRA_MUX_SPI2,
-	TEGRA_MUX_SPI2_ALT,
-	TEGRA_MUX_SPI3,
-	TEGRA_MUX_SPI4,
-	TEGRA_MUX_TRACE,
-	TEGRA_MUX_TWC,
-	TEGRA_MUX_UARTA,
-	TEGRA_MUX_UARTB,
-	TEGRA_MUX_UARTC,
-	TEGRA_MUX_UARTD,
-	TEGRA_MUX_UARTE,
-	TEGRA_MUX_ULPI,
-	TEGRA_MUX_VI,
-	TEGRA_MUX_VI_SENSOR_CLK,
-	TEGRA_MUX_XIO,
-	TEGRA_MUX_BLINK,
-	TEGRA_MUX_CEC,
-	TEGRA_MUX_CLK12,
-	TEGRA_MUX_DAP,
-	TEGRA_MUX_DAPSDMMC2,
-	TEGRA_MUX_DDR,
-	TEGRA_MUX_DEV3,
-	TEGRA_MUX_DTV,
-	TEGRA_MUX_VI_ALT1,
-	TEGRA_MUX_VI_ALT2,
-	TEGRA_MUX_VI_ALT3,
-	TEGRA_MUX_EMC_DLL,
-	TEGRA_MUX_EXTPERIPH1,
-	TEGRA_MUX_EXTPERIPH2,
-	TEGRA_MUX_EXTPERIPH3,
-	TEGRA_MUX_GMI_ALT,
-	TEGRA_MUX_HDA,
-	TEGRA_MUX_HSI,
-	TEGRA_MUX_I2C4,
-	TEGRA_MUX_I2C5,
-	TEGRA_MUX_I2CPWR,
-	TEGRA_MUX_I2S0,
-	TEGRA_MUX_I2S1,
-	TEGRA_MUX_I2S2,
-	TEGRA_MUX_I2S3,
-	TEGRA_MUX_I2S4,
-	TEGRA_MUX_NAND_ALT,
-	TEGRA_MUX_POPSDIO4,
-	TEGRA_MUX_POPSDMMC4,
-	TEGRA_MUX_PWM0,
-	TEGRA_MUX_PWM1,
-	TEGRA_MUX_PWM2,
-	TEGRA_MUX_PWM3,
-	TEGRA_MUX_SATA,
-	TEGRA_MUX_SPI5,
-	TEGRA_MUX_SPI6,
-	TEGRA_MUX_SYSCLK,
-	TEGRA_MUX_VGP1,
-	TEGRA_MUX_VGP2,
-	TEGRA_MUX_VGP3,
-	TEGRA_MUX_VGP4,
-	TEGRA_MUX_VGP5,
-	TEGRA_MUX_VGP6,
-	TEGRA_MUX_SAFE,
-	TEGRA_MAX_MUX,
-};
-
-enum tegra_pullupdown {
-	TEGRA_PUPD_NORMAL = 0,
-	TEGRA_PUPD_PULL_DOWN,
-	TEGRA_PUPD_PULL_UP,
-};
-
-enum tegra_tristate {
-	TEGRA_TRI_NORMAL = 0,
-	TEGRA_TRI_TRISTATE = 1,
-};
-
-enum tegra_pin_io {
-	TEGRA_PIN_OUTPUT = 0,
-	TEGRA_PIN_INPUT = 1,
-};
-
-enum tegra_vddio {
-	TEGRA_VDDIO_BB = 0,
-	TEGRA_VDDIO_LCD,
-	TEGRA_VDDIO_VI,
-	TEGRA_VDDIO_UART,
-	TEGRA_VDDIO_DDR,
-	TEGRA_VDDIO_NAND,
-	TEGRA_VDDIO_SYS,
-	TEGRA_VDDIO_AUDIO,
-	TEGRA_VDDIO_SD,
-	TEGRA_VDDIO_CAM,
-	TEGRA_VDDIO_GMI,
-	TEGRA_VDDIO_PEXCTL,
-	TEGRA_VDDIO_SDMMC1,
-	TEGRA_VDDIO_SDMMC3,
-	TEGRA_VDDIO_SDMMC4,
-};
-
-struct tegra_pingroup_config {
-	int pingroup;
-	enum tegra_mux_func	func;
-	enum tegra_pullupdown	pupd;
-	enum tegra_tristate	tristate;
-};
-
-enum tegra_slew {
-	TEGRA_SLEW_FASTEST = 0,
-	TEGRA_SLEW_FAST,
-	TEGRA_SLEW_SLOW,
-	TEGRA_SLEW_SLOWEST,
-	TEGRA_MAX_SLEW,
-};
-
-enum tegra_pull_strength {
-	TEGRA_PULL_0 = 0,
-	TEGRA_PULL_1,
-	TEGRA_PULL_2,
-	TEGRA_PULL_3,
-	TEGRA_PULL_4,
-	TEGRA_PULL_5,
-	TEGRA_PULL_6,
-	TEGRA_PULL_7,
-	TEGRA_PULL_8,
-	TEGRA_PULL_9,
-	TEGRA_PULL_10,
-	TEGRA_PULL_11,
-	TEGRA_PULL_12,
-	TEGRA_PULL_13,
-	TEGRA_PULL_14,
-	TEGRA_PULL_15,
-	TEGRA_PULL_16,
-	TEGRA_PULL_17,
-	TEGRA_PULL_18,
-	TEGRA_PULL_19,
-	TEGRA_PULL_20,
-	TEGRA_PULL_21,
-	TEGRA_PULL_22,
-	TEGRA_PULL_23,
-	TEGRA_PULL_24,
-	TEGRA_PULL_25,
-	TEGRA_PULL_26,
-	TEGRA_PULL_27,
-	TEGRA_PULL_28,
-	TEGRA_PULL_29,
-	TEGRA_PULL_30,
-	TEGRA_PULL_31,
-	TEGRA_MAX_PULL,
-};
-
-enum tegra_drive {
-	TEGRA_DRIVE_DIV_8 = 0,
-	TEGRA_DRIVE_DIV_4,
-	TEGRA_DRIVE_DIV_2,
-	TEGRA_DRIVE_DIV_1,
-	TEGRA_MAX_DRIVE,
-};
-
-enum tegra_hsm {
-	TEGRA_HSM_DISABLE = 0,
-	TEGRA_HSM_ENABLE,
-};
-
-enum tegra_schmitt {
-	TEGRA_SCHMITT_DISABLE = 0,
-	TEGRA_SCHMITT_ENABLE,
-};
-
-struct tegra_drive_pingroup_config {
-	int pingroup;
-	enum tegra_hsm hsm;
-	enum tegra_schmitt schmitt;
-	enum tegra_drive drive;
-	enum tegra_pull_strength pull_down;
-	enum tegra_pull_strength pull_up;
-	enum tegra_slew slew_rising;
-	enum tegra_slew slew_falling;
-};
-
-struct tegra_drive_pingroup_desc {
-	const char *name;
-	s16 reg_bank;
-	s16 reg;
-};
-
-struct tegra_pingroup_desc {
-	const char *name;
-	int funcs[4];
-	int func_safe;
-	int vddio;
-	enum tegra_pin_io io_default;
-	s16 tri_bank;	/* Register bank the tri_reg exists within */
-	s16 mux_bank;	/* Register bank the mux_reg exists within */
-	s16 pupd_bank;	/* Register bank the pupd_reg exists within */
-	s16 tri_reg; 	/* offset into the TRISTATE_REG_* register bank */
-	s16 mux_reg;	/* offset into the PIN_MUX_CTL_* register bank */
-	s16 pupd_reg;	/* offset into the PULL_UPDOWN_REG_* register bank */
-	s8 tri_bit; 	/* offset into the TRISTATE_REG_* register bit */
-	s8 mux_bit;	/* offset into the PIN_MUX_CTL_* register bit */
-	s8 pupd_bit;	/* offset into the PULL_UPDOWN_REG_* register bit */
-	s8 lock_bit;	/* offset of the LOCK bit into mux register bit */
-	s8 od_bit;	/* offset of the OD bit into mux register bit */
-	s8 ioreset_bit;	/* offset of the IO_RESET bit into mux register bit */
-};
-
-typedef void (*pinmux_init) (const struct tegra_pingroup_desc **pg,
-	int *pg_max, const struct tegra_drive_pingroup_desc **pgdrive,
-	int *pgdrive_max);
-
-void tegra20_pinmux_init(const struct tegra_pingroup_desc **pg, int *pg_max,
-	const struct tegra_drive_pingroup_desc **pgdrive, int *pgdrive_max);
-
-void tegra30_pinmux_init(const struct tegra_pingroup_desc **pg, int *pg_max,
-	const struct tegra_drive_pingroup_desc **pgdrive, int *pgdrive_max);
-
-int tegra_pinmux_set_tristate(int pg, enum tegra_tristate tristate);
-int tegra_pinmux_set_pullupdown(int pg, enum tegra_pullupdown pupd);
-
-void tegra_pinmux_config_table(const struct tegra_pingroup_config *config,
-	int len);
-
-void tegra_drive_pinmux_config_table(struct tegra_drive_pingroup_config *config,
-	int len);
-void tegra_pinmux_set_safe_pinmux_table(const struct tegra_pingroup_config *config,
-	int len);
-void tegra_pinmux_config_pinmux_table(const struct tegra_pingroup_config *config,
-	int len);
-void tegra_pinmux_config_tristate_table(const struct tegra_pingroup_config *config,
-	int len, enum tegra_tristate tristate);
-void tegra_pinmux_config_pullupdown_table(const struct tegra_pingroup_config *config,
-	int len, enum tegra_pullupdown pupd);
-#endif
diff --git a/arch/arm/mach-tegra/include/mach/tegra-ahb.h b/arch/arm/mach-tegra/include/mach/tegra-ahb.h
new file mode 100644
index 000000000000..e0f8c84b1d8c
--- /dev/null
+++ b/arch/arm/mach-tegra/include/mach/tegra-ahb.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef __MACH_TEGRA_AHB_H__
+#define __MACH_TEGRA_AHB_H__
+
+extern int tegra_ahb_enable_smmu(struct device_node *ahb);
+
+#endif	/* __MACH_TEGRA_AHB_H__ */
diff --git a/arch/arm/mach-tegra/include/mach/uncompress.h b/arch/arm/mach-tegra/include/mach/uncompress.h
index 5a440f315e57..937c4c50219e 100644
--- a/arch/arm/mach-tegra/include/mach/uncompress.h
+++ b/arch/arm/mach-tegra/include/mach/uncompress.h
@@ -63,52 +63,86 @@ static inline void save_uart_address(void)
 		buf[0] = 0;
 }
 
-/*
- * Setup before decompression.  This is where we do UART selection for
- * earlyprintk and init the uart_base register.
- */
-static inline void arch_decomp_setup(void)
+static const struct {
+	u32 base;
+	u32 reset_reg;
+	u32 clock_reg;
+	u32 bit;
+} uarts[] = {
+	{
+		TEGRA_UARTA_BASE,
+		TEGRA_CLK_RESET_BASE + 0x04,
+		TEGRA_CLK_RESET_BASE + 0x10,
+		6,
+	},
+	{
+		TEGRA_UARTB_BASE,
+		TEGRA_CLK_RESET_BASE + 0x04,
+		TEGRA_CLK_RESET_BASE + 0x10,
+		7,
+	},
+	{
+		TEGRA_UARTC_BASE,
+		TEGRA_CLK_RESET_BASE + 0x08,
+		TEGRA_CLK_RESET_BASE + 0x14,
+		23,
+	},
+	{
+		TEGRA_UARTD_BASE,
+		TEGRA_CLK_RESET_BASE + 0x0c,
+		TEGRA_CLK_RESET_BASE + 0x18,
+		1,
+	},
+	{
+		TEGRA_UARTE_BASE,
+		TEGRA_CLK_RESET_BASE + 0x0c,
+		TEGRA_CLK_RESET_BASE + 0x18,
+		2,
+	},
+};
+
+static inline bool uart_clocked(int i)
+{
+	if (*(u8 *)uarts[i].reset_reg & BIT(uarts[i].bit))
+		return false;
+
+	if (!(*(u8 *)uarts[i].clock_reg & BIT(uarts[i].bit)))
+		return false;
+
+	return true;
+}
+
+#ifdef CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA
+int auto_odmdata(void)
+{
+	volatile u32 *pmc = (volatile u32 *)TEGRA_PMC_BASE;
+	u32 odmdata = pmc[0xa0 / 4];
+
+	/*
+	 * Bits 19:18 are the console type: 0=default, 1=none, 2==DCC, 3==UART
+	 * Some boards apparently swap the last two values, but we don't have
+	 * any way of catering for that here, so we just accept either. If this
+	 * doesn't make sense for your board, just don't enable this feature.
+	 *
+	 * Bits 17:15 indicate the UART to use, 0/1/2/3/4 are UART A/B/C/D/E.
+	 */
+
+	switch  ((odmdata >> 18) & 3) {
+	case 2:
+	case 3:
+		break;
+	default:
+		return -1;
+	}
+
+	return (odmdata >> 15) & 7;
+}
+#endif
+
+#ifdef CONFIG_TEGRA_DEBUG_UART_AUTO_SCRATCH
+int auto_scratch(void)
 {
-	static const struct {
-		u32 base;
-		u32 reset_reg;
-		u32 clock_reg;
-		u32 bit;
-	} uarts[] = {
-		{
-			TEGRA_UARTA_BASE,
-			TEGRA_CLK_RESET_BASE + 0x04,
-			TEGRA_CLK_RESET_BASE + 0x10,
-			6,
-		},
-		{
-			TEGRA_UARTB_BASE,
-			TEGRA_CLK_RESET_BASE + 0x04,
-			TEGRA_CLK_RESET_BASE + 0x10,
-			7,
-		},
-		{
-			TEGRA_UARTC_BASE,
-			TEGRA_CLK_RESET_BASE + 0x08,
-			TEGRA_CLK_RESET_BASE + 0x14,
-			23,
-		},
-		{
-			TEGRA_UARTD_BASE,
-			TEGRA_CLK_RESET_BASE + 0x0c,
-			TEGRA_CLK_RESET_BASE + 0x18,
-			1,
-		},
-		{
-			TEGRA_UARTE_BASE,
-			TEGRA_CLK_RESET_BASE + 0x0c,
-			TEGRA_CLK_RESET_BASE + 0x18,
-			2,
-		},
-	};
 	int i;
-	volatile u32 *apb_misc = (volatile u32 *)TEGRA_APB_MISC_BASE;
-	u32 chip, div;
 
 	/*
 	 * Look for the first UART that:
@@ -125,20 +159,60 @@ static inline void arch_decomp_setup(void)
 	 * back to what's specified in TEGRA_DEBUG_UART_BASE.
 	 */
 	for (i = 0; i < ARRAY_SIZE(uarts); i++) {
-		if (*(u8 *)uarts[i].reset_reg & BIT(uarts[i].bit))
-			continue;
-
-		if (!(*(u8 *)uarts[i].clock_reg & BIT(uarts[i].bit)))
+		if (!uart_clocked(i))
 			continue;
 
 		uart = (volatile u8 *)uarts[i].base;
 		if (uart[UART_SCR << DEBUG_UART_SHIFT] != 'D')
 			continue;
 
-		break;
+		return i;
 	}
-	if (i == ARRAY_SIZE(uarts))
-		uart = (volatile u8 *)TEGRA_DEBUG_UART_BASE;
+
+	return -1;
+}
+#endif
+
+/*
+ * Setup before decompression.  This is where we do UART selection for
+ * earlyprintk and init the uart_base register.
+ */
+static inline void arch_decomp_setup(void)
+{
+	int uart_id, auto_uart_id;
+	volatile u32 *apb_misc = (volatile u32 *)TEGRA_APB_MISC_BASE;
+	u32 chip, div;
+
+#if defined(CONFIG_TEGRA_DEBUG_UARTA)
+	uart_id = 0;
+#elif defined(CONFIG_TEGRA_DEBUG_UARTB)
+	uart_id = 1;
+#elif defined(CONFIG_TEGRA_DEBUG_UARTC)
+	uart_id = 2;
+#elif defined(CONFIG_TEGRA_DEBUG_UARTD)
+	uart_id = 3;
+#elif defined(CONFIG_TEGRA_DEBUG_UARTE)
+	uart_id = 4;
+#else
+	uart_id = -1;
+#endif
+
+#if defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA)
+	auto_uart_id = auto_odmdata();
+#elif defined(CONFIG_TEGRA_DEBUG_UART_AUTO_SCRATCH)
+	auto_uart_id = auto_scratch();
+#else
+	auto_uart_id = -1;
+#endif
+	if (auto_uart_id != -1)
+		uart_id = auto_uart_id;
+
+	if (uart_id < 0 || uart_id >= ARRAY_SIZE(uarts) ||
+	    !uart_clocked(uart_id))
+		uart = NULL;
+	else
+		uart = (volatile u8 *)uarts[uart_id].base;
+
 	save_uart_address();
 	if (uart == NULL)
 		return;
diff --git a/arch/arm/mach-tegra/include/mach/usb_phy.h b/arch/arm/mach-tegra/include/mach/usb_phy.h
index de1a0f602b28..935ce9f65590 100644
--- a/arch/arm/mach-tegra/include/mach/usb_phy.h
+++ b/arch/arm/mach-tegra/include/mach/usb_phy.h
@@ -61,8 +61,8 @@ struct tegra_usb_phy {
 	struct usb_phy *ulpi;
 };
 
-struct tegra_usb_phy *tegra_usb_phy_open(int instance, void __iomem *regs,
-			void *config, enum tegra_usb_phy_mode phy_mode);
+struct tegra_usb_phy *tegra_usb_phy_open(struct device *dev, int instance,
+	void __iomem *regs, void *config, enum tegra_usb_phy_mode phy_mode);
 
 int tegra_usb_phy_power_on(struct tegra_usb_phy *phy);
 
diff --git a/arch/arm/mach-tegra/pcie.c b/arch/arm/mach-tegra/pcie.c
index 54a816ff3847..0e09137506ec 100644
--- a/arch/arm/mach-tegra/pcie.c
+++ b/arch/arm/mach-tegra/pcie.c
@@ -475,7 +475,6 @@ static struct hw_pci tegra_pcie_hw __initdata = {
 	.nr_controllers	= 2,
 	.setup		= tegra_pcie_setup,
 	.scan		= tegra_pcie_scan_bus,
-	.swizzle	= pci_std_swizzle,
 	.map_irq	= tegra_pcie_map_irq,
 };
 
diff --git a/arch/arm/mach-tegra/pinmux-tegra20-tables.c b/arch/arm/mach-tegra/pinmux-tegra20-tables.c
deleted file mode 100644
index 734add1280b7..000000000000
--- a/arch/arm/mach-tegra/pinmux-tegra20-tables.c
+++ /dev/null
@@ -1,244 +0,0 @@
-/*
- * linux/arch/arm/mach-tegra/pinmux-tegra20-tables.c
- *
- * Common pinmux configurations for Tegra20 SoCs
- *
- * Copyright (C) 2010 NVIDIA Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <linux/init.h>
-#include <linux/string.h>
-
-#include <mach/iomap.h>
-#include <mach/pinmux.h>
-#include <mach/pinmux-tegra20.h>
-#include <mach/suspend.h>
-
-#define TRISTATE_REG_A		0x14
-#define PIN_MUX_CTL_REG_A	0x80
-#define PULLUPDOWN_REG_A	0xa0
-#define PINGROUP_REG_A		0x868
-
-#define DRIVE_PINGROUP(pg_name, r)				\
-	[TEGRA_DRIVE_PINGROUP_ ## pg_name] = {			\
-		.name = #pg_name,				\
-		.reg_bank = 3,					\
-		.reg = ((r) - PINGROUP_REG_A)			\
-	}
-
-static const struct tegra_drive_pingroup_desc tegra_soc_drive_pingroups[TEGRA_MAX_DRIVE_PINGROUP] = {
-	DRIVE_PINGROUP(AO1,		0x868),
-	DRIVE_PINGROUP(AO2,		0x86c),
-	DRIVE_PINGROUP(AT1,		0x870),
-	DRIVE_PINGROUP(AT2,		0x874),
-	DRIVE_PINGROUP(CDEV1,		0x878),
-	DRIVE_PINGROUP(CDEV2,		0x87c),
-	DRIVE_PINGROUP(CSUS,		0x880),
-	DRIVE_PINGROUP(DAP1,		0x884),
-	DRIVE_PINGROUP(DAP2,		0x888),
-	DRIVE_PINGROUP(DAP3,		0x88c),
-	DRIVE_PINGROUP(DAP4,		0x890),
-	DRIVE_PINGROUP(DBG,		0x894),
-	DRIVE_PINGROUP(LCD1,		0x898),
-	DRIVE_PINGROUP(LCD2,		0x89c),
-	DRIVE_PINGROUP(SDMMC2,		0x8a0),
-	DRIVE_PINGROUP(SDMMC3,		0x8a4),
-	DRIVE_PINGROUP(SPI,		0x8a8),
-	DRIVE_PINGROUP(UAA,		0x8ac),
-	DRIVE_PINGROUP(UAB,		0x8b0),
-	DRIVE_PINGROUP(UART2,		0x8b4),
-	DRIVE_PINGROUP(UART3,		0x8b8),
-	DRIVE_PINGROUP(VI1,		0x8bc),
-	DRIVE_PINGROUP(VI2,		0x8c0),
-	DRIVE_PINGROUP(XM2A,		0x8c4),
-	DRIVE_PINGROUP(XM2C,		0x8c8),
-	DRIVE_PINGROUP(XM2D,		0x8cc),
-	DRIVE_PINGROUP(XM2CLK,		0x8d0),
-	DRIVE_PINGROUP(MEMCOMP,		0x8d4),
-	DRIVE_PINGROUP(SDIO1,		0x8e0),
-	DRIVE_PINGROUP(CRT,		0x8ec),
-	DRIVE_PINGROUP(DDC,		0x8f0),
-	DRIVE_PINGROUP(GMA,		0x8f4),
-	DRIVE_PINGROUP(GMB,		0x8f8),
-	DRIVE_PINGROUP(GMC,		0x8fc),
-	DRIVE_PINGROUP(GMD,		0x900),
-	DRIVE_PINGROUP(GME,		0x904),
-	DRIVE_PINGROUP(OWR,		0x908),
-	DRIVE_PINGROUP(UAD,		0x90c),
-};
-
-#define PINGROUP(pg_name, vdd, f0, f1, f2, f3, f_safe,		\
-		 tri_r, tri_b, mux_r, mux_b, pupd_r, pupd_b)	\
-	[TEGRA_PINGROUP_ ## pg_name] = {			\
-		.name = #pg_name,				\
-		.vddio = TEGRA_VDDIO_ ## vdd,			\
-		.funcs = {					\
-			TEGRA_MUX_ ## f0,			\
-			TEGRA_MUX_ ## f1,			\
-			TEGRA_MUX_ ## f2,			\
-			TEGRA_MUX_ ## f3,			\
-		},						\
-		.func_safe = TEGRA_MUX_ ## f_safe,		\
-		.tri_bank = 0,					\
-		.tri_reg = ((tri_r) - TRISTATE_REG_A),		\
-		.tri_bit = tri_b,				\
-		.mux_bank = 1,					\
-		.mux_reg = ((mux_r) - PIN_MUX_CTL_REG_A),	\
-		.mux_bit = mux_b,				\
-		.pupd_bank = 2,				\
-		.pupd_reg = ((pupd_r) - PULLUPDOWN_REG_A),	\
-		.pupd_bit = pupd_b,				\
-		.lock_bit = -1,					\
-		.od_bit = -1,					\
-		.ioreset_bit = -1,				\
-		.io_default = -1,				\
-	}
-
-static const struct tegra_pingroup_desc tegra_soc_pingroups[TEGRA_MAX_PINGROUP] = {
-	PINGROUP(ATA,   NAND,  IDE,       NAND,      GMI,       RSVD,          IDE,       0x14, 0,  0x80, 24, 0xA0, 0),
-	PINGROUP(ATB,   NAND,  IDE,       NAND,      GMI,       SDIO4,         IDE,       0x14, 1,  0x80, 16, 0xA0, 2),
-	PINGROUP(ATC,   NAND,  IDE,       NAND,      GMI,       SDIO4,         IDE,       0x14, 2,  0x80, 22, 0xA0, 4),
-	PINGROUP(ATD,   NAND,  IDE,       NAND,      GMI,       SDIO4,         IDE,       0x14, 3,  0x80, 20, 0xA0, 6),
-	PINGROUP(ATE,   NAND,  IDE,       NAND,      GMI,       RSVD,          IDE,       0x18, 25, 0x80, 12, 0xA0, 8),
-	PINGROUP(CDEV1, AUDIO, OSC,       PLLA_OUT,  PLLM_OUT1, AUDIO_SYNC,    OSC,       0x14, 4,  0x88, 2,  0xA8, 0),
-	PINGROUP(CDEV2, AUDIO, OSC,       AHB_CLK,   APB_CLK,   PLLP_OUT4,     OSC,       0x14, 5,  0x88, 4,  0xA8, 2),
-	PINGROUP(CRTP,  LCD,   CRT,       RSVD,      RSVD,      RSVD,          RSVD,      0x20, 14, 0x98, 20, 0xA4, 24),
-	PINGROUP(CSUS,  VI,    PLLC_OUT1, PLLP_OUT2, PLLP_OUT3, VI_SENSOR_CLK, PLLC_OUT1, 0x14, 6,  0x88, 6,  0xAC, 24),
-	PINGROUP(DAP1,  AUDIO, DAP1,      RSVD,      GMI,       SDIO2,         DAP1,      0x14, 7,  0x88, 20, 0xA0, 10),
-	PINGROUP(DAP2,  AUDIO, DAP2,      TWC,       RSVD,      GMI,           DAP2,      0x14, 8,  0x88, 22, 0xA0, 12),
-	PINGROUP(DAP3,  BB,    DAP3,      RSVD,      RSVD,      RSVD,          DAP3,      0x14, 9,  0x88, 24, 0xA0, 14),
-	PINGROUP(DAP4,  UART,  DAP4,      RSVD,      GMI,       RSVD,          DAP4,      0x14, 10, 0x88, 26, 0xA0, 16),
-	PINGROUP(DDC,   LCD,   I2C2,      RSVD,      RSVD,      RSVD,          RSVD4,     0x18, 31, 0x88, 0,  0xB0, 28),
-	PINGROUP(DTA,   VI,    RSVD,      SDIO2,     VI,        RSVD,          RSVD4,     0x14, 11, 0x84, 20, 0xA0, 18),
-	PINGROUP(DTB,   VI,    RSVD,      RSVD,      VI,        SPI1,          RSVD1,     0x14, 12, 0x84, 22, 0xA0, 20),
-	PINGROUP(DTC,   VI,    RSVD,      RSVD,      VI,        RSVD,          RSVD1,     0x14, 13, 0x84, 26, 0xA0, 22),
-	PINGROUP(DTD,   VI,    RSVD,      SDIO2,     VI,        RSVD,          RSVD1,     0x14, 14, 0x84, 28, 0xA0, 24),
-	PINGROUP(DTE,   VI,    RSVD,      RSVD,      VI,        SPI1,          RSVD1,     0x14, 15, 0x84, 30, 0xA0, 26),
-	PINGROUP(DTF,   VI,    I2C3,      RSVD,      VI,        RSVD,          RSVD4,     0x20, 12, 0x98, 30, 0xA0, 28),
-	PINGROUP(GMA,   NAND,  UARTE,     SPI3,      GMI,       SDIO4,         SPI3,      0x14, 28, 0x84, 0,  0xB0, 20),
-	PINGROUP(GMB,   NAND,  IDE,       NAND,      GMI,       GMI_INT,       GMI,       0x18, 29, 0x88, 28, 0xB0, 22),
-	PINGROUP(GMC,   NAND,  UARTD,     SPI4,      GMI,       SFLASH,        SPI4,      0x14, 29, 0x84, 2,  0xB0, 24),
-	PINGROUP(GMD,   NAND,  RSVD,      NAND,      GMI,       SFLASH,        GMI,       0x18, 30, 0x88, 30, 0xB0, 26),
-	PINGROUP(GME,   NAND,  RSVD,      DAP5,      GMI,       SDIO4,         GMI,       0x18, 0,  0x8C, 0,  0xA8, 24),
-	PINGROUP(GPU,   UART,  PWM,       UARTA,     GMI,       RSVD,          RSVD4,     0x14, 16, 0x8C, 4,  0xA4, 20),
-	PINGROUP(GPU7,  SYS,   RTCK,      RSVD,      RSVD,      RSVD,          RTCK,      0x20, 11, 0x98, 28, 0xA4, 6),
-	PINGROUP(GPV,   SD,    PCIE,      RSVD,      RSVD,      RSVD,          PCIE,      0x14, 17, 0x8C, 2,  0xA0, 30),
-	PINGROUP(HDINT, LCD,   HDMI,      RSVD,      RSVD,      RSVD,          HDMI,      0x1C, 23, 0x84, 4,  0xAC, 22),
-	PINGROUP(I2CP,  SYS,   I2C,       RSVD,      RSVD,      RSVD,          RSVD4,     0x14, 18, 0x88, 8,  0xA4, 2),
-	PINGROUP(IRRX,  UART,  UARTA,     UARTB,     GMI,       SPI4,          UARTB,     0x14, 20, 0x88, 18, 0xA8, 22),
-	PINGROUP(IRTX,  UART,  UARTA,     UARTB,     GMI,       SPI4,          UARTB,     0x14, 19, 0x88, 16, 0xA8, 20),
-	PINGROUP(KBCA,  SYS,   KBC,       NAND,      SDIO2,     EMC_TEST0_DLL, KBC,       0x14, 22, 0x88, 10, 0xA4, 8),
-	PINGROUP(KBCB,  SYS,   KBC,       NAND,      SDIO2,     MIO,           KBC,       0x14, 21, 0x88, 12, 0xA4, 10),
-	PINGROUP(KBCC,  SYS,   KBC,       NAND,      TRACE,     EMC_TEST1_DLL, KBC,       0x18, 26, 0x88, 14, 0xA4, 12),
-	PINGROUP(KBCD,  SYS,   KBC,       NAND,      SDIO2,     MIO,           KBC,       0x20, 10, 0x98, 26, 0xA4, 14),
-	PINGROUP(KBCE,  SYS,   KBC,       NAND,      OWR,       RSVD,          KBC,       0x14, 26, 0x80, 28, 0xB0, 2),
-	PINGROUP(KBCF,  SYS,   KBC,       NAND,      TRACE,     MIO,           KBC,       0x14, 27, 0x80, 26, 0xB0, 0),
-	PINGROUP(LCSN,  LCD,   DISPLAYA,  DISPLAYB,  SPI3,      RSVD,          RSVD4,     0x1C, 31, 0x90, 12, 0xAC, 20),
-	PINGROUP(LD0,   LCD,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          RSVD4,     0x1C, 0,  0x94, 0,  0xAC, 12),
-	PINGROUP(LD1,   LCD,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          RSVD4,     0x1C, 1,  0x94, 2,  0xAC, 12),
-	PINGROUP(LD10,  LCD,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          RSVD4,     0x1C, 10, 0x94, 20, 0xAC, 12),
-	PINGROUP(LD11,  LCD,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          RSVD4,     0x1C, 11, 0x94, 22, 0xAC, 12),
-	PINGROUP(LD12,  LCD,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          RSVD4,     0x1C, 12, 0x94, 24, 0xAC, 12),
-	PINGROUP(LD13,  LCD,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          RSVD4,     0x1C, 13, 0x94, 26, 0xAC, 12),
-	PINGROUP(LD14,  LCD,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          RSVD4,     0x1C, 14, 0x94, 28, 0xAC, 12),
-	PINGROUP(LD15,  LCD,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          RSVD4,     0x1C, 15, 0x94, 30, 0xAC, 12),
-	PINGROUP(LD16,  LCD,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          RSVD4,     0x1C, 16, 0x98, 0,  0xAC, 12),
-	PINGROUP(LD17,  LCD,   DISPLAYA,  DISPLAYB,  RSVD,      RSVD,          RSVD4,     0x1C, 17, 0x98, 2,  0xAC, 12),
-	PINGROUP(LD2,   LCD,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          RSVD4,     0x1C, 2,  0x94, 4,  0xAC, 12),
-	PINGROUP(LD3,   LCD,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          RSVD4,     0x1C, 3,  0x94, 6,  0xAC, 12),
-	PINGROUP(LD4,   LCD,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          RSVD4,     0x1C, 4,  0x94, 8,  0xAC, 12),
-	PINGROUP(LD5,   LCD,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          RSVD4,     0x1C, 5,  0x94, 10, 0xAC, 12),
-	PINGROUP(LD6,   LCD,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          RSVD4,     0x1C, 6,  0x94, 12, 0xAC, 12),
-	PINGROUP(LD7,   LCD,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          RSVD4,     0x1C, 7,  0x94, 14, 0xAC, 12),
-	PINGROUP(LD8,   LCD,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          RSVD4,     0x1C, 8,  0x94, 16, 0xAC, 12),
-	PINGROUP(LD9,   LCD,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          RSVD4,     0x1C, 9,  0x94, 18, 0xAC, 12),
-	PINGROUP(LDC,   LCD,   DISPLAYA,  DISPLAYB,  RSVD,      RSVD,          RSVD4,     0x1C, 30, 0x90, 14, 0xAC, 20),
-	PINGROUP(LDI,   LCD,   DISPLAYA,  DISPLAYB,  RSVD,      RSVD,          RSVD4,     0x20, 6,  0x98, 16, 0xAC, 18),
-	PINGROUP(LHP0,  LCD,   DISPLAYA,  DISPLAYB,  RSVD,      RSVD,          RSVD4,     0x1C, 18, 0x98, 10, 0xAC, 16),
-	PINGROUP(LHP1,  LCD,   DISPLAYA,  DISPLAYB,  RSVD,      RSVD,          RSVD4,     0x1C, 19, 0x98, 4,  0xAC, 14),
-	PINGROUP(LHP2,  LCD,   DISPLAYA,  DISPLAYB,  RSVD,      RSVD,          RSVD4,     0x1C, 20, 0x98, 6,  0xAC, 14),
-	PINGROUP(LHS,   LCD,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          RSVD4,     0x20, 7,  0x90, 22, 0xAC, 22),
-	PINGROUP(LM0,   LCD,   DISPLAYA,  DISPLAYB,  SPI3,      RSVD,          RSVD4,     0x1C, 24, 0x90, 26, 0xAC, 22),
-	PINGROUP(LM1,   LCD,   DISPLAYA,  DISPLAYB,  RSVD,      CRT,           RSVD3,     0x1C, 25, 0x90, 28, 0xAC, 22),
-	PINGROUP(LPP,   LCD,   DISPLAYA,  DISPLAYB,  RSVD,      RSVD,          RSVD4,     0x20, 8,  0x98, 14, 0xAC, 18),
-	PINGROUP(LPW0,  LCD,   DISPLAYA,  DISPLAYB,  SPI3,      HDMI,          DISPLAYA,  0x20, 3,  0x90, 0,  0xAC, 20),
-	PINGROUP(LPW1,  LCD,   DISPLAYA,  DISPLAYB,  RSVD,      RSVD,          RSVD4,     0x20, 4,  0x90, 2,  0xAC, 20),
-	PINGROUP(LPW2,  LCD,   DISPLAYA,  DISPLAYB,  SPI3,      HDMI,          DISPLAYA,  0x20, 5,  0x90, 4,  0xAC, 20),
-	PINGROUP(LSC0,  LCD,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          RSVD4,     0x1C, 27, 0x90, 18, 0xAC, 22),
-	PINGROUP(LSC1,  LCD,   DISPLAYA,  DISPLAYB,  SPI3,      HDMI,          DISPLAYA,  0x1C, 28, 0x90, 20, 0xAC, 20),
-	PINGROUP(LSCK,  LCD,   DISPLAYA,  DISPLAYB,  SPI3,      HDMI,          DISPLAYA,  0x1C, 29, 0x90, 16, 0xAC, 20),
-	PINGROUP(LSDA,  LCD,   DISPLAYA,  DISPLAYB,  SPI3,      HDMI,          DISPLAYA,  0x20, 1,  0x90, 8,  0xAC, 20),
-	PINGROUP(LSDI,  LCD,   DISPLAYA,  DISPLAYB,  SPI3,      RSVD,          DISPLAYA,  0x20, 2,  0x90, 6,  0xAC, 20),
-	PINGROUP(LSPI,  LCD,   DISPLAYA,  DISPLAYB,  XIO,       HDMI,          DISPLAYA,  0x20, 0,  0x90, 10, 0xAC, 22),
-	PINGROUP(LVP0,  LCD,   DISPLAYA,  DISPLAYB,  RSVD,      RSVD,          RSVD4,     0x1C, 21, 0x90, 30, 0xAC, 22),
-	PINGROUP(LVP1,  LCD,   DISPLAYA,  DISPLAYB,  RSVD,      RSVD,          RSVD4,     0x1C, 22, 0x98, 8,  0xAC, 16),
-	PINGROUP(LVS,   LCD,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          RSVD4,     0x1C, 26, 0x90, 24, 0xAC, 22),
-	PINGROUP(OWC,   SYS,   OWR,       RSVD,      RSVD,      RSVD,          OWR,       0x14, 31, 0x84, 8,  0xB0, 30),
-	PINGROUP(PMC,   SYS,   PWR_ON,    PWR_INTR,  RSVD,      RSVD,          PWR_ON,    0x14, 23, 0x98, 18, -1,   -1),
-	PINGROUP(PTA,   NAND,  I2C2,      HDMI,      GMI,       RSVD,          RSVD4,     0x14, 24, 0x98, 22, 0xA4, 4),
-	PINGROUP(RM,    UART,  I2C,       RSVD,      RSVD,      RSVD,          RSVD4,     0x14, 25, 0x80, 14, 0xA4, 0),
-	PINGROUP(SDB,   SD,    UARTA,     PWM,       SDIO3,     SPI2,          PWM,       0x20, 15, 0x8C, 10, -1,   -1),
-	PINGROUP(SDC,   SD,    PWM,       TWC,       SDIO3,     SPI3,          TWC,       0x18, 1,  0x8C, 12, 0xAC, 28),
-	PINGROUP(SDD,   SD,    UARTA,     PWM,       SDIO3,     SPI3,          PWM,       0x18, 2,  0x8C, 14, 0xAC, 30),
-	PINGROUP(SDIO1, BB,    SDIO1,     RSVD,      UARTE,     UARTA,         RSVD2,     0x14, 30, 0x80, 30, 0xB0, 18),
-	PINGROUP(SLXA,  SD,    PCIE,      SPI4,      SDIO3,     SPI2,          PCIE,      0x18, 3,  0x84, 6,  0xA4, 22),
-	PINGROUP(SLXC,  SD,    SPDIF,     SPI4,      SDIO3,     SPI2,          SPI4,      0x18, 5,  0x84, 10, 0xA4, 26),
-	PINGROUP(SLXD,  SD,    SPDIF,     SPI4,      SDIO3,     SPI2,          SPI4,      0x18, 6,  0x84, 12, 0xA4, 28),
-	PINGROUP(SLXK,  SD,    PCIE,      SPI4,      SDIO3,     SPI2,          PCIE,      0x18, 7,  0x84, 14, 0xA4, 30),
-	PINGROUP(SPDI,  AUDIO, SPDIF,     RSVD,      I2C,       SDIO2,         RSVD2,     0x18, 8,  0x8C, 8,  0xA4, 16),
-	PINGROUP(SPDO,  AUDIO, SPDIF,     RSVD,      I2C,       SDIO2,         RSVD2,     0x18, 9,  0x8C, 6,  0xA4, 18),
-	PINGROUP(SPIA,  AUDIO, SPI1,      SPI2,      SPI3,      GMI,           GMI,       0x18, 10, 0x8C, 30, 0xA8, 4),
-	PINGROUP(SPIB,  AUDIO, SPI1,      SPI2,      SPI3,      GMI,           GMI,       0x18, 11, 0x8C, 28, 0xA8, 6),
-	PINGROUP(SPIC,  AUDIO, SPI1,      SPI2,      SPI3,      GMI,           GMI,       0x18, 12, 0x8C, 26, 0xA8, 8),
-	PINGROUP(SPID,  AUDIO, SPI2,      SPI1,      SPI2_ALT,  GMI,           GMI,       0x18, 13, 0x8C, 24, 0xA8, 10),
-	PINGROUP(SPIE,  AUDIO, SPI2,      SPI1,      SPI2_ALT,  GMI,           GMI,       0x18, 14, 0x8C, 22, 0xA8, 12),
-	PINGROUP(SPIF,  AUDIO, SPI3,      SPI1,      SPI2,      RSVD,          RSVD4,     0x18, 15, 0x8C, 20, 0xA8, 14),
-	PINGROUP(SPIG,  AUDIO, SPI3,      SPI2,      SPI2_ALT,  I2C,           SPI2_ALT,  0x18, 16, 0x8C, 18, 0xA8, 16),
-	PINGROUP(SPIH,  AUDIO, SPI3,      SPI2,      SPI2_ALT,  I2C,           SPI2_ALT,  0x18, 17, 0x8C, 16, 0xA8, 18),
-	PINGROUP(UAA,   BB,    SPI3,      MIPI_HS,   UARTA,     ULPI,          MIPI_HS,   0x18, 18, 0x80, 0,  0xAC, 0),
-	PINGROUP(UAB,   BB,    SPI2,      MIPI_HS,   UARTA,     ULPI,          MIPI_HS,   0x18, 19, 0x80, 2,  0xAC, 2),
-	PINGROUP(UAC,   BB,    OWR,       RSVD,      RSVD,      RSVD,          RSVD4,     0x18, 20, 0x80, 4,  0xAC, 4),
-	PINGROUP(UAD,   UART,  IRDA,      SPDIF,     UARTA,     SPI4,          SPDIF,     0x18, 21, 0x80, 6,  0xAC, 6),
-	PINGROUP(UCA,   UART,  UARTC,     RSVD,      GMI,       RSVD,          RSVD4,     0x18, 22, 0x84, 16, 0xAC, 8),
-	PINGROUP(UCB,   UART,  UARTC,     PWM,       GMI,       RSVD,          RSVD4,     0x18, 23, 0x84, 18, 0xAC, 10),
-	PINGROUP(UDA,   BB,    SPI1,      RSVD,      UARTD,     ULPI,          RSVD2,     0x20, 13, 0x80, 8,  0xB0, 16),
-	/* these pin groups only have pullup and pull down control */
-	PINGROUP(CK32,  SYS,   RSVD,      RSVD,      RSVD,      RSVD,          RSVD,      -1,   -1, -1,   -1, 0xB0, 14),
-	PINGROUP(DDRC,  DDR,   RSVD,      RSVD,      RSVD,      RSVD,          RSVD,      -1,   -1, -1,   -1, 0xAC, 26),
-	PINGROUP(PMCA,  SYS,   RSVD,      RSVD,      RSVD,      RSVD,          RSVD,      -1,   -1, -1,   -1, 0xB0, 4),
-	PINGROUP(PMCB,  SYS,   RSVD,      RSVD,      RSVD,      RSVD,          RSVD,      -1,   -1, -1,   -1, 0xB0, 6),
-	PINGROUP(PMCC,  SYS,   RSVD,      RSVD,      RSVD,      RSVD,          RSVD,      -1,   -1, -1,   -1, 0xB0, 8),
-	PINGROUP(PMCD,  SYS,   RSVD,      RSVD,      RSVD,      RSVD,          RSVD,      -1,   -1, -1,   -1, 0xB0, 10),
-	PINGROUP(PMCE,  SYS,   RSVD,      RSVD,      RSVD,      RSVD,          RSVD,      -1,   -1, -1,   -1, 0xB0, 12),
-	PINGROUP(XM2C,  DDR,   RSVD,      RSVD,      RSVD,      RSVD,          RSVD,      -1,   -1, -1,   -1, 0xA8, 30),
-	PINGROUP(XM2D,  DDR,   RSVD,      RSVD,      RSVD,      RSVD,          RSVD,      -1,   -1, -1,   -1, 0xA8, 28),
-};
-
-void __devinit tegra20_pinmux_init(const struct tegra_pingroup_desc **pg,
-		int *pg_max, const struct tegra_drive_pingroup_desc **pgdrive,
-		int *pgdrive_max)
-{
-	*pg = tegra_soc_pingroups;
-	*pg_max = TEGRA_MAX_PINGROUP;
-	*pgdrive = tegra_soc_drive_pingroups;
-	*pgdrive_max = TEGRA_MAX_DRIVE_PINGROUP;
-}
-
diff --git a/arch/arm/mach-tegra/pinmux-tegra30-tables.c b/arch/arm/mach-tegra/pinmux-tegra30-tables.c
deleted file mode 100644
index 14fc0e4c1c44..000000000000
--- a/arch/arm/mach-tegra/pinmux-tegra30-tables.c
+++ /dev/null
@@ -1,376 +0,0 @@
-/*
- * linux/arch/arm/mach-tegra/pinmux-tegra30-tables.c
- *
- * Common pinmux configurations for Tegra30 SoCs
- *
- * Copyright (C) 2010,2011 NVIDIA Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <linux/init.h>
-#include <linux/string.h>
-
-#include <mach/iomap.h>
-#include <mach/pinmux.h>
-#include <mach/pinmux-tegra30.h>
-#include <mach/suspend.h>
-
-#define PINGROUP_REG_A	0x868
-#define MUXCTL_REG_A	0x3000
-
-#define DRIVE_PINGROUP(pg_name, r)		\
-	[TEGRA_DRIVE_PINGROUP_ ## pg_name] = {	\
-		.name = #pg_name,		\
-		.reg_bank = 0,			\
-		.reg = ((r) - PINGROUP_REG_A)	\
-	}
-
-static const struct tegra_drive_pingroup_desc tegra_soc_drive_pingroups[TEGRA_MAX_DRIVE_PINGROUP] = {
-	DRIVE_PINGROUP(AO1,		0x868),
-	DRIVE_PINGROUP(AO2,		0x86c),
-	DRIVE_PINGROUP(AT1,		0x870),
-	DRIVE_PINGROUP(AT2,		0x874),
-	DRIVE_PINGROUP(AT3,		0x878),
-	DRIVE_PINGROUP(AT4,		0x87c),
-	DRIVE_PINGROUP(AT5,		0x880),
-	DRIVE_PINGROUP(CDEV1,		0x884),
-	DRIVE_PINGROUP(CDEV2,		0x888),
-	DRIVE_PINGROUP(CSUS,		0x88c),
-	DRIVE_PINGROUP(DAP1,		0x890),
-	DRIVE_PINGROUP(DAP2,		0x894),
-	DRIVE_PINGROUP(DAP3,		0x898),
-	DRIVE_PINGROUP(DAP4,		0x89c),
-	DRIVE_PINGROUP(DBG,		0x8a0),
-	DRIVE_PINGROUP(LCD1,		0x8a4),
-	DRIVE_PINGROUP(LCD2,		0x8a8),
-	DRIVE_PINGROUP(SDIO2,		0x8ac),
-	DRIVE_PINGROUP(SDIO3,		0x8b0),
-	DRIVE_PINGROUP(SPI,		0x8b4),
-	DRIVE_PINGROUP(UAA,		0x8b8),
-	DRIVE_PINGROUP(UAB,		0x8bc),
-	DRIVE_PINGROUP(UART2,		0x8c0),
-	DRIVE_PINGROUP(UART3,		0x8c4),
-	DRIVE_PINGROUP(VI1,		0x8c8),
-	DRIVE_PINGROUP(SDIO1,		0x8ec),
-	DRIVE_PINGROUP(CRT,		0x8f8),
-	DRIVE_PINGROUP(DDC,		0x8fc),
-	DRIVE_PINGROUP(GMA,		0x900),
-	DRIVE_PINGROUP(GMB,		0x904),
-	DRIVE_PINGROUP(GMC,		0x908),
-	DRIVE_PINGROUP(GMD,		0x90c),
-	DRIVE_PINGROUP(GME,		0x910),
-	DRIVE_PINGROUP(GMF,		0x914),
-	DRIVE_PINGROUP(GMG,		0x918),
-	DRIVE_PINGROUP(GMH,		0x91c),
-	DRIVE_PINGROUP(OWR,		0x920),
-	DRIVE_PINGROUP(UAD,		0x924),
-	DRIVE_PINGROUP(GPV,		0x928),
-	DRIVE_PINGROUP(DEV3,		0x92c),
-	DRIVE_PINGROUP(CEC,		0x938),
-};
-
-#define PINGROUP(pg_name, vdd, f0, f1, f2, f3, fs, iod, reg)	\
-	[TEGRA_PINGROUP_ ## pg_name] = {			\
-		.name = #pg_name,				\
-		.vddio = TEGRA_VDDIO_ ## vdd,			\
-		.funcs = {					\
-			TEGRA_MUX_ ## f0,			\
-			TEGRA_MUX_ ## f1,			\
-			TEGRA_MUX_ ## f2,			\
-			TEGRA_MUX_ ## f3,			\
-		},						\
-		.func_safe = TEGRA_MUX_ ## fs,			\
-		.tri_bank = 1,					\
-		.tri_reg = ((reg) - MUXCTL_REG_A),		\
-		.tri_bit = 4,					\
-		.mux_bank = 1,					\
-		.mux_reg = ((reg) - MUXCTL_REG_A),		\
-		.mux_bit = 0,					\
-		.pupd_bank = 1,					\
-		.pupd_reg = ((reg) - MUXCTL_REG_A),		\
-		.pupd_bit = 2,					\
-		.io_default = TEGRA_PIN_ ## iod,		\
-		.od_bit = 6,					\
-		.lock_bit = 7,					\
-		.ioreset_bit = 8,				\
-	}
-
-static const struct tegra_pingroup_desc tegra_soc_pingroups[TEGRA_MAX_PINGROUP] = {
-	/*       NAME		  VDD	    f0		f1          f2          f3          fSafe       io	reg */
-	PINGROUP(ULPI_DATA0,	  BB,	    SPI3,	HSI,	    UARTA,	ULPI,	    RSVD,	INPUT,	0x3000),
-	PINGROUP(ULPI_DATA1,	  BB,	    SPI3,	HSI,	    UARTA,	ULPI,	    RSVD,	INPUT,	0x3004),
-	PINGROUP(ULPI_DATA2,	  BB,	    SPI3,	HSI,	    UARTA,	ULPI,	    RSVD,	INPUT,	0x3008),
-	PINGROUP(ULPI_DATA3,	  BB,	    SPI3,	HSI,	    UARTA,	ULPI,	    RSVD,	INPUT,	0x300c),
-	PINGROUP(ULPI_DATA4,	  BB,	    SPI2,	HSI,	    UARTA,	ULPI,	    RSVD,	INPUT,	0x3010),
-	PINGROUP(ULPI_DATA5,	  BB,	    SPI2,	HSI,	    UARTA,	ULPI,	    RSVD,	INPUT,	0x3014),
-	PINGROUP(ULPI_DATA6,	  BB,	    SPI2,	HSI,	    UARTA,	ULPI,	    RSVD,	INPUT,	0x3018),
-	PINGROUP(ULPI_DATA7,	  BB,	    SPI2,	HSI,	    UARTA,	ULPI,	    RSVD,	INPUT,	0x301c),
-	PINGROUP(ULPI_CLK,	  BB,	    SPI1,	RSVD,	    UARTD,	ULPI,	    RSVD,	INPUT,	0x3020),
-	PINGROUP(ULPI_DIR,	  BB,	    SPI1,	RSVD,	    UARTD,	ULPI,	    RSVD,	INPUT,	0x3024),
-	PINGROUP(ULPI_NXT,	  BB,	    SPI1,	RSVD,	    UARTD,	ULPI,	    RSVD,	INPUT,	0x3028),
-	PINGROUP(ULPI_STP,	  BB,	    SPI1,	RSVD,	    UARTD,	ULPI,	    RSVD,	INPUT,	0x302c),
-	PINGROUP(DAP3_FS,	  BB,	    I2S2,	RSVD1,	    DISPLAYA,	DISPLAYB,   RSVD,	INPUT,	0x3030),
-	PINGROUP(DAP3_DIN,	  BB,	    I2S2,	RSVD1,	    DISPLAYA,	DISPLAYB,   RSVD,	INPUT,	0x3034),
-	PINGROUP(DAP3_DOUT,	  BB,	    I2S2,	RSVD1,	    DISPLAYA,	DISPLAYB,   RSVD,	INPUT,	0x3038),
-	PINGROUP(DAP3_SCLK,	  BB,	    I2S2,	RSVD1,	    DISPLAYA,	DISPLAYB,   RSVD,	INPUT,	0x303c),
-	PINGROUP(GPIO_PV0,	  BB,	    RSVD,	RSVD,	    RSVD,	RSVD,	    RSVD,	INPUT,	0x3040),
-	PINGROUP(GPIO_PV1,	  BB,	    RSVD,	RSVD,	    RSVD,	RSVD,	    RSVD,	INPUT,	0x3044),
-	PINGROUP(SDMMC1_CLK,	  SDMMC1,   SDIO1,	RSVD1,	    RSVD2,	INVALID,    RSVD,	INPUT,	0x3048),
-	PINGROUP(SDMMC1_CMD,	  SDMMC1,   SDIO1,	RSVD1,	    RSVD2,	INVALID,    RSVD,	INPUT,	0x304c),
-	PINGROUP(SDMMC1_DAT3,	  SDMMC1,   SDIO1,	RSVD1,	    UARTE,	INVALID,    RSVD,	INPUT,	0x3050),
-	PINGROUP(SDMMC1_DAT2,	  SDMMC1,   SDIO1,	RSVD1,	    UARTE,	INVALID,    RSVD,	INPUT,	0x3054),
-	PINGROUP(SDMMC1_DAT1,	  SDMMC1,   SDIO1,	RSVD1,	    UARTE,	INVALID,    RSVD,	INPUT,	0x3058),
-	PINGROUP(SDMMC1_DAT0,	  SDMMC1,   SDIO1,	RSVD1,	    UARTE,	INVALID,    RSVD,	INPUT,	0x305c),
-	PINGROUP(GPIO_PV2,	  SDMMC1,   OWR,	RSVD1,	    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x3060),
-	PINGROUP(GPIO_PV3,	  SDMMC1,   INVALID,	RSVD1,	    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x3064),
-	PINGROUP(CLK2_OUT,	  SDMMC1,   EXTPERIPH2,	RSVD1,	    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x3068),
-	PINGROUP(CLK2_REQ,	  SDMMC1,   DAP,	RSVD1,	    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x306c),
-	PINGROUP(LCD_PWR1,	  LCD,	    DISPLAYA,	DISPLAYB,   RSVD1,	RSVD2,	    RSVD,	OUTPUT,	0x3070),
-	PINGROUP(LCD_PWR2,	  LCD,	    DISPLAYA,	DISPLAYB,   SPI5,	INVALID,    RSVD,	OUTPUT,	0x3074),
-	PINGROUP(LCD_SDIN,	  LCD,	    DISPLAYA,	DISPLAYB,   SPI5,	RSVD,	    RSVD,	OUTPUT,	0x3078),
-	PINGROUP(LCD_SDOUT,	  LCD,	    DISPLAYA,	DISPLAYB,   SPI5,	INVALID,    RSVD,	OUTPUT,	0x307c),
-	PINGROUP(LCD_WR_N,	  LCD,	    DISPLAYA,	DISPLAYB,   SPI5,	INVALID,    RSVD,	OUTPUT,	0x3080),
-	PINGROUP(LCD_CS0_N,	  LCD,	    DISPLAYA,	DISPLAYB,   SPI5,	RSVD,	    RSVD,	OUTPUT,	0x3084),
-	PINGROUP(LCD_DC0,	  LCD,	    DISPLAYA,	DISPLAYB,   RSVD1,	RSVD2,	    RSVD,	OUTPUT,	0x3088),
-	PINGROUP(LCD_SCK,	  LCD,	    DISPLAYA,	DISPLAYB,   SPI5,	INVALID,    RSVD,	OUTPUT,	0x308c),
-	PINGROUP(LCD_PWR0,	  LCD,	    DISPLAYA,	DISPLAYB,   SPI5,	INVALID,    RSVD,	OUTPUT,	0x3090),
-	PINGROUP(LCD_PCLK,	  LCD,	    DISPLAYA,	DISPLAYB,   RSVD1,	RSVD2,	    RSVD,	OUTPUT,	0x3094),
-	PINGROUP(LCD_DE,	  LCD,	    DISPLAYA,	DISPLAYB,   RSVD1,	RSVD2,	    RSVD,	OUTPUT,	0x3098),
-	PINGROUP(LCD_HSYNC,	  LCD,	    DISPLAYA,	DISPLAYB,   RSVD1,	RSVD2,	    RSVD,	OUTPUT,	0x309c),
-	PINGROUP(LCD_VSYNC,	  LCD,	    DISPLAYA,	DISPLAYB,   RSVD1,	RSVD2,	    RSVD,	OUTPUT,	0x30a0),
-	PINGROUP(LCD_D0,	  LCD,	    DISPLAYA,	DISPLAYB,   RSVD1,	RSVD2,	    RSVD,	OUTPUT,	0x30a4),
-	PINGROUP(LCD_D1,	  LCD,	    DISPLAYA,	DISPLAYB,   RSVD1,	RSVD2,	    RSVD,	OUTPUT,	0x30a8),
-	PINGROUP(LCD_D2,	  LCD,	    DISPLAYA,	DISPLAYB,   RSVD1,	RSVD2,	    RSVD,	OUTPUT,	0x30ac),
-	PINGROUP(LCD_D3,	  LCD,	    DISPLAYA,	DISPLAYB,   RSVD1,	RSVD2,	    RSVD,	OUTPUT,	0x30b0),
-	PINGROUP(LCD_D4,	  LCD,	    DISPLAYA,	DISPLAYB,   RSVD1,	RSVD2,	    RSVD,	OUTPUT,	0x30b4),
-	PINGROUP(LCD_D5,	  LCD,	    DISPLAYA,	DISPLAYB,   RSVD1,	RSVD2,	    RSVD,	OUTPUT,	0x30b8),
-	PINGROUP(LCD_D6,	  LCD,	    DISPLAYA,	DISPLAYB,   RSVD1,	RSVD2,	    RSVD,	OUTPUT,	0x30bc),
-	PINGROUP(LCD_D7,	  LCD,	    DISPLAYA,	DISPLAYB,   RSVD1,	RSVD2,	    RSVD,	OUTPUT,	0x30c0),
-	PINGROUP(LCD_D8,	  LCD,	    DISPLAYA,	DISPLAYB,   RSVD1,	RSVD2,	    RSVD,	OUTPUT,	0x30c4),
-	PINGROUP(LCD_D9,	  LCD,	    DISPLAYA,	DISPLAYB,   RSVD1,	RSVD2,	    RSVD,	OUTPUT,	0x30c8),
-	PINGROUP(LCD_D10,	  LCD,	    DISPLAYA,	DISPLAYB,   RSVD1,	RSVD2,	    RSVD,	OUTPUT,	0x30cc),
-	PINGROUP(LCD_D11,	  LCD,	    DISPLAYA,	DISPLAYB,   RSVD1,	RSVD2,	    RSVD,	OUTPUT,	0x30d0),
-	PINGROUP(LCD_D12,	  LCD,	    DISPLAYA,	DISPLAYB,   RSVD1,	RSVD2,	    RSVD,	OUTPUT,	0x30d4),
-	PINGROUP(LCD_D13,	  LCD,	    DISPLAYA,	DISPLAYB,   RSVD1,	RSVD2,	    RSVD,	OUTPUT,	0x30d8),
-	PINGROUP(LCD_D14,	  LCD,	    DISPLAYA,	DISPLAYB,   RSVD1,	RSVD2,	    RSVD,	OUTPUT,	0x30dc),
-	PINGROUP(LCD_D15,	  LCD,	    DISPLAYA,	DISPLAYB,   RSVD1,	RSVD2,	    RSVD,	OUTPUT,	0x30e0),
-	PINGROUP(LCD_D16,	  LCD,	    DISPLAYA,	DISPLAYB,   RSVD1,	RSVD2,	    RSVD,	OUTPUT,	0x30e4),
-	PINGROUP(LCD_D17,	  LCD,	    DISPLAYA,	DISPLAYB,   RSVD1,	RSVD2,	    RSVD,	OUTPUT,	0x30e8),
-	PINGROUP(LCD_D18,	  LCD,	    DISPLAYA,	DISPLAYB,   RSVD1,	RSVD2,	    RSVD,	OUTPUT,	0x30ec),
-	PINGROUP(LCD_D19,	  LCD,	    DISPLAYA,	DISPLAYB,   RSVD1,	RSVD2,	    RSVD,	OUTPUT,	0x30f0),
-	PINGROUP(LCD_D20,	  LCD,	    DISPLAYA,	DISPLAYB,   RSVD1,	RSVD2,	    RSVD,	OUTPUT,	0x30f4),
-	PINGROUP(LCD_D21,	  LCD,	    DISPLAYA,	DISPLAYB,   RSVD1,	RSVD2,	    RSVD,	OUTPUT,	0x30f8),
-	PINGROUP(LCD_D22,	  LCD,	    DISPLAYA,	DISPLAYB,   RSVD1,	RSVD2,	    RSVD,	OUTPUT,	0x30fc),
-	PINGROUP(LCD_D23,	  LCD,	    DISPLAYA,	DISPLAYB,   RSVD1,	RSVD2,	    RSVD,	OUTPUT,	0x3100),
-	PINGROUP(LCD_CS1_N,	  LCD,	    DISPLAYA,	DISPLAYB,   SPI5,	RSVD2,	    RSVD,	OUTPUT,	0x3104),
-	PINGROUP(LCD_M1,	  LCD,	    DISPLAYA,	DISPLAYB,   RSVD1,	RSVD2,	    RSVD,	OUTPUT,	0x3108),
-	PINGROUP(LCD_DC1,	  LCD,	    DISPLAYA,	DISPLAYB,   RSVD1,	RSVD2,	    RSVD,	OUTPUT,	0x310c),
-	PINGROUP(HDMI_INT,	  LCD,	    RSVD,	RSVD,	    RSVD,	RSVD,	    RSVD,	INPUT,	0x3110),
-	PINGROUP(DDC_SCL,	  LCD,	    I2C4,	RSVD1,	    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x3114),
-	PINGROUP(DDC_SDA,	  LCD,	    I2C4,	RSVD1,	    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x3118),
-	PINGROUP(CRT_HSYNC,	  LCD,	    CRT,	RSVD1,	    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x311c),
-	PINGROUP(CRT_VSYNC,	  LCD,	    CRT,	RSVD1,	    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x3120),
-	PINGROUP(VI_D0,		  VI,	    INVALID,	RSVD1,	    VI,		RSVD2,	    RSVD,	INPUT,	0x3124),
-	PINGROUP(VI_D1,		  VI,	    INVALID,	SDIO2,	    VI,		RSVD1,	    RSVD,	INPUT,	0x3128),
-	PINGROUP(VI_D2,		  VI,	    INVALID,	SDIO2,	    VI,		RSVD1,	    RSVD,	INPUT,	0x312c),
-	PINGROUP(VI_D3,		  VI,	    INVALID,	SDIO2,	    VI,		RSVD1,	    RSVD,	INPUT,	0x3130),
-	PINGROUP(VI_D4,		  VI,	    INVALID,	SDIO2,	    VI,		RSVD1,	    RSVD,	INPUT,	0x3134),
-	PINGROUP(VI_D5,		  VI,	    INVALID,	SDIO2,	    VI,		RSVD1,	    RSVD,	INPUT,	0x3138),
-	PINGROUP(VI_D6,		  VI,	    INVALID,	SDIO2,	    VI,		RSVD1,	    RSVD,	INPUT,	0x313c),
-	PINGROUP(VI_D7,		  VI,	    INVALID,	SDIO2,	    VI,		RSVD1,	    RSVD,	INPUT,	0x3140),
-	PINGROUP(VI_D8,		  VI,	    INVALID,	SDIO2,	    VI,		RSVD1,	    RSVD,	INPUT,	0x3144),
-	PINGROUP(VI_D9,		  VI,	    INVALID,	SDIO2,	    VI,		RSVD1,	    RSVD,	INPUT,	0x3148),
-	PINGROUP(VI_D10,	  VI,	    INVALID,	RSVD1,	    VI,		RSVD2,	    RSVD,	INPUT,	0x314c),
-	PINGROUP(VI_D11,	  VI,	    INVALID,	RSVD1,	    VI,		RSVD2,	    RSVD,	INPUT,	0x3150),
-	PINGROUP(VI_PCLK,	  VI,	    RSVD1,	SDIO2,	    VI,		RSVD2,	    RSVD,	INPUT,	0x3154),
-	PINGROUP(VI_MCLK,	  VI,	    VI,		INVALID,    INVALID,	INVALID,    RSVD,	INPUT,	0x3158),
-	PINGROUP(VI_VSYNC,	  VI,	    INVALID,	RSVD1,	    VI,		RSVD2,	    RSVD,	INPUT,	0x315c),
-	PINGROUP(VI_HSYNC,	  VI,	    INVALID,	RSVD1,	    VI,		RSVD2,	    RSVD,	INPUT,	0x3160),
-	PINGROUP(UART2_RXD,	  UART,	    IRDA,	SPDIF,	    UARTA,	SPI4,	    RSVD,	INPUT,	0x3164),
-	PINGROUP(UART2_TXD,	  UART,	    IRDA,	SPDIF,	    UARTA,	SPI4,	    RSVD,	INPUT,	0x3168),
-	PINGROUP(UART2_RTS_N,	  UART,	    UARTA,	UARTB,	    GMI,	SPI4,	    RSVD,	INPUT,	0x316c),
-	PINGROUP(UART2_CTS_N,	  UART,	    UARTA,	UARTB,	    GMI,	SPI4,	    RSVD,	INPUT,	0x3170),
-	PINGROUP(UART3_TXD,	  UART,	    UARTC,	RSVD1,	    GMI,	RSVD2,	    RSVD,	INPUT,	0x3174),
-	PINGROUP(UART3_RXD,	  UART,	    UARTC,	RSVD1,	    GMI,	RSVD2,	    RSVD,	INPUT,	0x3178),
-	PINGROUP(UART3_CTS_N,	  UART,	    UARTC,	RSVD1,	    GMI,	RSVD2,	    RSVD,	INPUT,	0x317c),
-	PINGROUP(UART3_RTS_N,	  UART,	    UARTC,	PWM0,	    GMI,	RSVD2,	    RSVD,	INPUT,	0x3180),
-	PINGROUP(GPIO_PU0,	  UART,	    OWR,	UARTA,	    GMI,	RSVD1,	    RSVD,	INPUT,	0x3184),
-	PINGROUP(GPIO_PU1,	  UART,	    RSVD1,	UARTA,	    GMI,	RSVD2,	    RSVD,	INPUT,	0x3188),
-	PINGROUP(GPIO_PU2,	  UART,	    RSVD1,	UARTA,	    GMI,	RSVD2,	    RSVD,	INPUT,	0x318c),
-	PINGROUP(GPIO_PU3,	  UART,	    PWM0,	UARTA,	    GMI,	RSVD1,	    RSVD,	INPUT,	0x3190),
-	PINGROUP(GPIO_PU4,	  UART,	    PWM1,	UARTA,	    GMI,	RSVD1,	    RSVD,	INPUT,	0x3194),
-	PINGROUP(GPIO_PU5,	  UART,	    PWM2,	UARTA,	    GMI,	RSVD1,	    RSVD,	INPUT,	0x3198),
-	PINGROUP(GPIO_PU6,	  UART,	    PWM3,	UARTA,	    GMI,	RSVD1,	    RSVD,	INPUT,	0x319c),
-	PINGROUP(GEN1_I2C_SDA,	  UART,	    I2C,	RSVD1,	    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x31a0),
-	PINGROUP(GEN1_I2C_SCL,	  UART,	    I2C,	RSVD1,	    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x31a4),
-	PINGROUP(DAP4_FS,	  UART,	    I2S3,	RSVD1,	    GMI,	RSVD2,	    RSVD,	INPUT,	0x31a8),
-	PINGROUP(DAP4_DIN,	  UART,	    I2S3,	RSVD1,	    GMI,	RSVD2,	    RSVD,	INPUT,	0x31ac),
-	PINGROUP(DAP4_DOUT,	  UART,	    I2S3,	RSVD1,	    GMI,	RSVD2,	    RSVD,	INPUT,	0x31b0),
-	PINGROUP(DAP4_SCLK,	  UART,	    I2S3,	RSVD1,	    GMI,	RSVD2,	    RSVD,	INPUT,	0x31b4),
-	PINGROUP(CLK3_OUT,	  UART,	    EXTPERIPH3,	RSVD1,	    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x31b8),
-	PINGROUP(CLK3_REQ,	  UART,	    DEV3,	RSVD1,	    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x31bc),
-	PINGROUP(GMI_WP_N,	  GMI,	    RSVD1,	NAND,	    GMI,	GMI_ALT,    RSVD,	INPUT,	0x31c0),
-	PINGROUP(GMI_IORDY,	  GMI,	    RSVD1,	NAND,	    GMI,	RSVD2,	    RSVD,	INPUT,	0x31c4),
-	PINGROUP(GMI_WAIT,	  GMI,	    RSVD1,	NAND,	    GMI,	RSVD2,	    RSVD,	INPUT,	0x31c8),
-	PINGROUP(GMI_ADV_N,	  GMI,	    RSVD1,	NAND,	    GMI,	RSVD2,	    RSVD,	INPUT,	0x31cc),
-	PINGROUP(GMI_CLK,	  GMI,	    RSVD1,	NAND,	    GMI,	RSVD2,	    RSVD,	INPUT,	0x31d0),
-	PINGROUP(GMI_CS0_N,	  GMI,	    RSVD1,	NAND,	    GMI,	INVALID,    RSVD,	INPUT,	0x31d4),
-	PINGROUP(GMI_CS1_N,	  GMI,	    RSVD1,	NAND,	    GMI,	DTV,	    RSVD,	INPUT,	0x31d8),
-	PINGROUP(GMI_CS2_N,	  GMI,	    RSVD1,	NAND,	    GMI,	RSVD2,	    RSVD,	INPUT,	0x31dc),
-	PINGROUP(GMI_CS3_N,	  GMI,	    RSVD1,	NAND,	    GMI,	GMI_ALT,    RSVD,	INPUT,	0x31e0),
-	PINGROUP(GMI_CS4_N,	  GMI,	    RSVD1,	NAND,	    GMI,	RSVD2,	    RSVD,	INPUT,	0x31e4),
-	PINGROUP(GMI_CS6_N,	  GMI,	    NAND,	NAND_ALT,   GMI,	SATA,	    RSVD,	INPUT,	0x31e8),
-	PINGROUP(GMI_CS7_N,	  GMI,	    NAND,	NAND_ALT,   GMI,	GMI_ALT,    RSVD,	INPUT,	0x31ec),
-	PINGROUP(GMI_AD0,	  GMI,	    RSVD1,	NAND,	    GMI,	RSVD2,	    RSVD,	INPUT,	0x31f0),
-	PINGROUP(GMI_AD1,	  GMI,	    RSVD1,	NAND,	    GMI,	RSVD2,	    RSVD,	INPUT,	0x31f4),
-	PINGROUP(GMI_AD2,	  GMI,	    RSVD1,	NAND,	    GMI,	RSVD2,	    RSVD,	INPUT,	0x31f8),
-	PINGROUP(GMI_AD3,	  GMI,	    RSVD1,	NAND,	    GMI,	RSVD2,	    RSVD,	INPUT,	0x31fc),
-	PINGROUP(GMI_AD4,	  GMI,	    RSVD1,	NAND,	    GMI,	RSVD2,	    RSVD,	INPUT,	0x3200),
-	PINGROUP(GMI_AD5,	  GMI,	    RSVD1,	NAND,	    GMI,	RSVD2,	    RSVD,	INPUT,	0x3204),
-	PINGROUP(GMI_AD6,	  GMI,	    RSVD1,	NAND,	    GMI,	RSVD2,	    RSVD,	INPUT,	0x3208),
-	PINGROUP(GMI_AD7,	  GMI,	    RSVD1,	NAND,	    GMI,	RSVD2,	    RSVD,	INPUT,	0x320c),
-	PINGROUP(GMI_AD8,	  GMI,	    PWM0,	NAND,	    GMI,	RSVD2,	    RSVD,	INPUT,	0x3210),
-	PINGROUP(GMI_AD9,	  GMI,	    PWM1,	NAND,	    GMI,	RSVD2,	    RSVD,	INPUT,	0x3214),
-	PINGROUP(GMI_AD10,	  GMI,	    PWM2,	NAND,	    GMI,	RSVD2,	    RSVD,	INPUT,	0x3218),
-	PINGROUP(GMI_AD11,	  GMI,	    PWM3,	NAND,	    GMI,	RSVD2,	    RSVD,	INPUT,	0x321c),
-	PINGROUP(GMI_AD12,	  GMI,	    RSVD1,	NAND,	    GMI,	RSVD2,	    RSVD,	INPUT,	0x3220),
-	PINGROUP(GMI_AD13,	  GMI,	    RSVD1,	NAND,	    GMI,	RSVD2,	    RSVD,	INPUT,	0x3224),
-	PINGROUP(GMI_AD14,	  GMI,	    RSVD1,	NAND,	    GMI,	RSVD2,	    RSVD,	INPUT,	0x3228),
-	PINGROUP(GMI_AD15,	  GMI,	    RSVD1,	NAND,	    GMI,	RSVD2,	    RSVD,	INPUT,	0x322c),
-	PINGROUP(GMI_A16,	  GMI,	    UARTD,	SPI4,	    GMI,	GMI_ALT,    RSVD,	INPUT,	0x3230),
-	PINGROUP(GMI_A17,	  GMI,	    UARTD,	SPI4,	    GMI,	INVALID,    RSVD,	INPUT,	0x3234),
-	PINGROUP(GMI_A18,	  GMI,	    UARTD,	SPI4,	    GMI,	INVALID,    RSVD,	INPUT,	0x3238),
-	PINGROUP(GMI_A19,	  GMI,	    UARTD,	SPI4,	    GMI,	RSVD3,	    RSVD,	INPUT,	0x323c),
-	PINGROUP(GMI_WR_N,	  GMI,	    RSVD1,	NAND,	    GMI,	RSVD3,	    RSVD,	INPUT,	0x3240),
-	PINGROUP(GMI_OE_N,	  GMI,	    RSVD1,	NAND,	    GMI,	RSVD3,	    RSVD,	INPUT,	0x3244),
-	PINGROUP(GMI_DQS,	  GMI,	    RSVD1,	NAND,	    GMI,	RSVD3,	    RSVD,	INPUT,	0x3248),
-	PINGROUP(GMI_RST_N,	  GMI,	    NAND,	NAND_ALT,   GMI,	RSVD3,	    RSVD,	INPUT,	0x324c),
-	PINGROUP(GEN2_I2C_SCL,	  GMI,	    I2C2,	INVALID,    GMI,	RSVD3,	    RSVD,	INPUT,	0x3250),
-	PINGROUP(GEN2_I2C_SDA,	  GMI,	    I2C2,	INVALID,    GMI,	RSVD3,	    RSVD,	INPUT,	0x3254),
-	PINGROUP(SDMMC4_CLK,	  SDMMC4,   INVALID,	NAND,	    GMI,	SDIO4,	    RSVD,	INPUT,	0x3258),
-	PINGROUP(SDMMC4_CMD,	  SDMMC4,   I2C3,	NAND,	    GMI,	SDIO4,	    RSVD,	INPUT,	0x325c),
-	PINGROUP(SDMMC4_DAT0,	  SDMMC4,   UARTE,	SPI3,	    GMI,	SDIO4,	    RSVD,	INPUT,	0x3260),
-	PINGROUP(SDMMC4_DAT1,	  SDMMC4,   UARTE,	SPI3,	    GMI,	SDIO4,	    RSVD,	INPUT,	0x3264),
-	PINGROUP(SDMMC4_DAT2,	  SDMMC4,   UARTE,	SPI3,	    GMI,	SDIO4,	    RSVD,	INPUT,	0x3268),
-	PINGROUP(SDMMC4_DAT3,	  SDMMC4,   UARTE,	SPI3,	    GMI,	SDIO4,	    RSVD,	INPUT,	0x326c),
-	PINGROUP(SDMMC4_DAT4,	  SDMMC4,   I2C3,	I2S4,	    GMI,	SDIO4,	    RSVD,	INPUT,	0x3270),
-	PINGROUP(SDMMC4_DAT5,	  SDMMC4,   VGP3,	I2S4,	    GMI,	SDIO4,	    RSVD,	INPUT,	0x3274),
-	PINGROUP(SDMMC4_DAT6,	  SDMMC4,   VGP4,	I2S4,	    GMI,	SDIO4,	    RSVD,	INPUT,	0x3278),
-	PINGROUP(SDMMC4_DAT7,	  SDMMC4,   VGP5,	I2S4,	    GMI,	SDIO4,	    RSVD,	INPUT,	0x327c),
-	PINGROUP(SDMMC4_RST_N,	  SDMMC4,   VGP6,	RSVD1,	    RSVD2,	POPSDMMC4,  RSVD,	INPUT,	0x3280),
-	PINGROUP(CAM_MCLK,	  CAM,	    VI,		INVALID,    VI_ALT2,	POPSDMMC4,  RSVD,	INPUT,	0x3284),
-	PINGROUP(GPIO_PCC1,	  CAM,	    I2S4,	RSVD1,	    RSVD2,	POPSDMMC4,  RSVD,	INPUT,	0x3288),
-	PINGROUP(GPIO_PBB0,	  CAM,	    I2S4,	RSVD1,	    RSVD2,	POPSDMMC4,  RSVD,	INPUT,	0x328c),
-	PINGROUP(CAM_I2C_SCL,	  CAM,	    INVALID,	I2C3,	    RSVD2,	POPSDMMC4,  RSVD,	INPUT,	0x3290),
-	PINGROUP(CAM_I2C_SDA,	  CAM,	    INVALID,	I2C3,	    RSVD2,	POPSDMMC4,  RSVD,	INPUT,	0x3294),
-	PINGROUP(GPIO_PBB3,	  CAM,	    VGP3,	DISPLAYA,   DISPLAYB,	POPSDMMC4,  RSVD,	INPUT,	0x3298),
-	PINGROUP(GPIO_PBB4,	  CAM,	    VGP4,	DISPLAYA,   DISPLAYB,	POPSDMMC4,  RSVD,	INPUT,	0x329c),
-	PINGROUP(GPIO_PBB5,	  CAM,	    VGP5,	DISPLAYA,   DISPLAYB,	POPSDMMC4,  RSVD,	INPUT,	0x32a0),
-	PINGROUP(GPIO_PBB6,	  CAM,	    VGP6,	DISPLAYA,   DISPLAYB,	POPSDMMC4,  RSVD,	INPUT,	0x32a4),
-	PINGROUP(GPIO_PBB7,	  CAM,	    I2S4,	RSVD1,	    RSVD2,	POPSDMMC4,  RSVD,	INPUT,	0x32a8),
-	PINGROUP(GPIO_PCC2,	  CAM,	    I2S4,	RSVD1,	    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x32ac),
-	PINGROUP(JTAG_RTCK,	  SYS,	    RTCK,	RSVD1,	    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x32b0),
-	PINGROUP(PWR_I2C_SCL,	  SYS,	    I2CPWR,	RSVD1,	    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x32b4),
-	PINGROUP(PWR_I2C_SDA,	  SYS,	    I2CPWR,	RSVD1,	    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x32b8),
-	PINGROUP(KB_ROW0,	  SYS,	    KBC,	INVALID,    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x32bc),
-	PINGROUP(KB_ROW1,	  SYS,	    KBC,	INVALID,    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x32c0),
-	PINGROUP(KB_ROW2,	  SYS,	    KBC,	INVALID,    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x32c4),
-	PINGROUP(KB_ROW3,	  SYS,	    KBC,	INVALID,    RSVD2,	INVALID,    RSVD,	INPUT,	0x32c8),
-	PINGROUP(KB_ROW4,	  SYS,	    KBC,	INVALID,    TRACE,	RSVD3,	    RSVD,	INPUT,	0x32cc),
-	PINGROUP(KB_ROW5,	  SYS,	    KBC,	INVALID,    TRACE,	OWR,	    RSVD,	INPUT,	0x32d0),
-	PINGROUP(KB_ROW6,	  SYS,	    KBC,	INVALID,    SDIO2,	INVALID,    RSVD,	INPUT,	0x32d4),
-	PINGROUP(KB_ROW7,	  SYS,	    KBC,	INVALID,    SDIO2,	INVALID,    RSVD,	INPUT,	0x32d8),
-	PINGROUP(KB_ROW8,	  SYS,	    KBC,	INVALID,    SDIO2,	INVALID,    RSVD,	INPUT,	0x32dc),
-	PINGROUP(KB_ROW9,	  SYS,	    KBC,	INVALID,    SDIO2,	INVALID,    RSVD,	INPUT,	0x32e0),
-	PINGROUP(KB_ROW10,	  SYS,	    KBC,	INVALID,    SDIO2,	INVALID,    RSVD,	INPUT,	0x32e4),
-	PINGROUP(KB_ROW11,	  SYS,	    KBC,	INVALID,    SDIO2,	INVALID,    RSVD,	INPUT,	0x32e8),
-	PINGROUP(KB_ROW12,	  SYS,	    KBC,	INVALID,    SDIO2,	INVALID,    RSVD,	INPUT,	0x32ec),
-	PINGROUP(KB_ROW13,	  SYS,	    KBC,	INVALID,    SDIO2,	INVALID,    RSVD,	INPUT,	0x32f0),
-	PINGROUP(KB_ROW14,	  SYS,	    KBC,	INVALID,    SDIO2,	INVALID,    RSVD,	INPUT,	0x32f4),
-	PINGROUP(KB_ROW15,	  SYS,	    KBC,	INVALID,    SDIO2,	INVALID,    RSVD,	INPUT,	0x32f8),
-	PINGROUP(KB_COL0,	  SYS,	    KBC,	INVALID,    TRACE,	INVALID,    RSVD,	INPUT,	0x32fc),
-	PINGROUP(KB_COL1,	  SYS,	    KBC,	INVALID,    TRACE,	INVALID,    RSVD,	INPUT,	0x3300),
-	PINGROUP(KB_COL2,	  SYS,	    KBC,	INVALID,    TRACE,	RSVD,	    RSVD,	INPUT,	0x3304),
-	PINGROUP(KB_COL3,	  SYS,	    KBC,	INVALID,    TRACE,	RSVD,	    RSVD,	INPUT,	0x3308),
-	PINGROUP(KB_COL4,	  SYS,	    KBC,	INVALID,    TRACE,	RSVD,	    RSVD,	INPUT,	0x330c),
-	PINGROUP(KB_COL5,	  SYS,	    KBC,	INVALID,    TRACE,	RSVD,	    RSVD,	INPUT,	0x3310),
-	PINGROUP(KB_COL6,	  SYS,	    KBC,	INVALID,    TRACE,	INVALID,    RSVD,	INPUT,	0x3314),
-	PINGROUP(KB_COL7,	  SYS,	    KBC,	INVALID,    TRACE,	INVALID,    RSVD,	INPUT,	0x3318),
-	PINGROUP(CLK_32K_OUT,	  SYS,	    BLINK,	RSVD1,	    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x331c),
-	PINGROUP(SYS_CLK_REQ,	  SYS,	    SYSCLK,	RSVD1,	    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x3320),
-	PINGROUP(CORE_PWR_REQ,	  SYS,	    RSVD,	RSVD,	    RSVD,	RSVD,	    RSVD,	INPUT,	0x3324),
-	PINGROUP(CPU_PWR_REQ,	  SYS,	    RSVD,	RSVD,	    RSVD,	RSVD,	    RSVD,	INPUT,	0x3328),
-	PINGROUP(PWR_INT_N,	  SYS,	    RSVD,	RSVD,	    RSVD,	RSVD,	    RSVD,	INPUT,	0x332c),
-	PINGROUP(CLK_32K_IN,	  SYS,	    RSVD,	RSVD,	    RSVD,	RSVD,	    RSVD,	INPUT,	0x3330),
-	PINGROUP(OWR,		  SYS,	    OWR,	RSVD,	    RSVD,	RSVD,	    RSVD,	INPUT,	0x3334),
-	PINGROUP(DAP1_FS,	  AUDIO,    I2S0,	HDA,	    GMI,	SDIO2,	    RSVD,	INPUT,	0x3338),
-	PINGROUP(DAP1_DIN,	  AUDIO,    I2S0,	HDA,	    GMI,	SDIO2,	    RSVD,	INPUT,	0x333c),
-	PINGROUP(DAP1_DOUT,	  AUDIO,    I2S0,	HDA,	    GMI,	SDIO2,	    RSVD,	INPUT,	0x3340),
-	PINGROUP(DAP1_SCLK,	  AUDIO,    I2S0,	HDA,	    GMI,	SDIO2,	    RSVD,	INPUT,	0x3344),
-	PINGROUP(CLK1_REQ,	  AUDIO,    DAP,	HDA,	    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x3348),
-	PINGROUP(CLK1_OUT,	  AUDIO,    EXTPERIPH1,	RSVD1,	    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x334c),
-	PINGROUP(SPDIF_IN,	  AUDIO,    SPDIF,	HDA,	    INVALID,	DAPSDMMC2,  RSVD,	INPUT,	0x3350),
-	PINGROUP(SPDIF_OUT,	  AUDIO,    SPDIF,	RSVD1,	    INVALID,	DAPSDMMC2,  RSVD,	INPUT,	0x3354),
-	PINGROUP(DAP2_FS,	  AUDIO,    I2S1,	HDA,	    RSVD2,	GMI,	    RSVD,	INPUT,	0x3358),
-	PINGROUP(DAP2_DIN,	  AUDIO,    I2S1,	HDA,	    RSVD2,	GMI,	    RSVD,	INPUT,	0x335c),
-	PINGROUP(DAP2_DOUT,	  AUDIO,    I2S1,	HDA,	    RSVD2,	GMI,	    RSVD,	INPUT,	0x3360),
-	PINGROUP(DAP2_SCLK,	  AUDIO,    I2S1,	HDA,	    RSVD2,	GMI,	    RSVD,	INPUT,	0x3364),
-	PINGROUP(SPI2_MOSI,	  AUDIO,    SPI6,	SPI2,	    INVALID,	GMI,	    RSVD,	INPUT,	0x3368),
-	PINGROUP(SPI2_MISO,	  AUDIO,    SPI6,	SPI2,	    INVALID,	GMI,	    RSVD,	INPUT,	0x336c),
-	PINGROUP(SPI2_CS0_N,	  AUDIO,    SPI6,	SPI2,	    INVALID,	GMI,	    RSVD,	INPUT,	0x3370),
-	PINGROUP(SPI2_SCK,	  AUDIO,    SPI6,	SPI2,	    INVALID,	GMI,	    RSVD,	INPUT,	0x3374),
-	PINGROUP(SPI1_MOSI,	  AUDIO,    SPI2,	SPI1,	    INVALID,	GMI,	    RSVD,	INPUT,	0x3378),
-	PINGROUP(SPI1_SCK,	  AUDIO,    SPI2,	SPI1,	    INVALID,	GMI,	    RSVD,	INPUT,	0x337c),
-	PINGROUP(SPI1_CS0_N,	  AUDIO,    SPI2,	SPI1,	    INVALID,	GMI,	    RSVD,	INPUT,	0x3380),
-	PINGROUP(SPI1_MISO,	  AUDIO,    INVALID,	SPI1,	    INVALID,	RSVD3,	    RSVD,	INPUT,	0x3384),
-	PINGROUP(SPI2_CS1_N,	  AUDIO,    INVALID,	SPI2,	    INVALID,	INVALID,    RSVD,	INPUT,	0x3388),
-	PINGROUP(SPI2_CS2_N,	  AUDIO,    INVALID,	SPI2,	    INVALID,	INVALID,    RSVD,	INPUT,	0x338c),
-	PINGROUP(SDMMC3_CLK,	  SDMMC3,   UARTA,	PWM2,	    SDIO3,	INVALID,    RSVD,	INPUT,	0x3390),
-	PINGROUP(SDMMC3_CMD,	  SDMMC3,   UARTA,	PWM3,	    SDIO3,	INVALID,    RSVD,	INPUT,	0x3394),
-	PINGROUP(SDMMC3_DAT0,	  SDMMC3,   RSVD,	RSVD1,	    SDIO3,	INVALID,    RSVD,	INPUT,	0x3398),
-	PINGROUP(SDMMC3_DAT1,	  SDMMC3,   RSVD,	RSVD1,	    SDIO3,	INVALID,    RSVD,	INPUT,	0x339c),
-	PINGROUP(SDMMC3_DAT2,	  SDMMC3,   RSVD,	PWM1,	    SDIO3,	INVALID,    RSVD,	INPUT,	0x33a0),
-	PINGROUP(SDMMC3_DAT3,	  SDMMC3,   RSVD,	PWM0,	    SDIO3,	INVALID,    RSVD,	INPUT,	0x33a4),
-	PINGROUP(SDMMC3_DAT4,	  SDMMC3,   PWM1,	INVALID,    SDIO3,	INVALID,    RSVD,	INPUT,	0x33a8),
-	PINGROUP(SDMMC3_DAT5,	  SDMMC3,   PWM0,	INVALID,    SDIO3,	INVALID,    RSVD,	INPUT,	0x33ac),
-	PINGROUP(SDMMC3_DAT6,	  SDMMC3,   SPDIF,	INVALID,    SDIO3,	INVALID,    RSVD,	INPUT,	0x33b0),
-	PINGROUP(SDMMC3_DAT7,	  SDMMC3,   SPDIF,	INVALID,    SDIO3,	INVALID,    RSVD,	INPUT,	0x33b4),
-	PINGROUP(PEX_L0_PRSNT_N,  PEXCTL,   PCIE,	HDA,	    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x33b8),
-	PINGROUP(PEX_L0_RST_N,	  PEXCTL,   PCIE,	HDA,	    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x33bc),
-	PINGROUP(PEX_L0_CLKREQ_N, PEXCTL,   PCIE,	HDA,	    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x33c0),
-	PINGROUP(PEX_WAKE_N,	  PEXCTL,   PCIE,	HDA,	    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x33c4),
-	PINGROUP(PEX_L1_PRSNT_N,  PEXCTL,   PCIE,	HDA,	    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x33c8),
-	PINGROUP(PEX_L1_RST_N,	  PEXCTL,   PCIE,	HDA,	    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x33cc),
-	PINGROUP(PEX_L1_CLKREQ_N, PEXCTL,   PCIE,	HDA,	    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x33d0),
-	PINGROUP(PEX_L2_PRSNT_N,  PEXCTL,   PCIE,	HDA,	    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x33d4),
-	PINGROUP(PEX_L2_RST_N,	  PEXCTL,   PCIE,	HDA,	    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x33d8),
-	PINGROUP(PEX_L2_CLKREQ_N, PEXCTL,   PCIE,	HDA,	    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x33dc),
-	PINGROUP(HDMI_CEC,	  SYS,      CEC,	RSVD1,	    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x33e0),
-};
-
-void __devinit tegra30_pinmux_init(const struct tegra_pingroup_desc **pg,
-		int *pg_max, const struct tegra_drive_pingroup_desc **pgdrive,
-		int *pgdrive_max)
-{
-	*pg = tegra_soc_pingroups;
-	*pg_max = TEGRA_MAX_PINGROUP;
-	*pgdrive = tegra_soc_drive_pingroups;
-	*pgdrive_max = TEGRA_MAX_DRIVE_PINGROUP;
-}
-
diff --git a/arch/arm/mach-tegra/pinmux.c b/arch/arm/mach-tegra/pinmux.c
deleted file mode 100644
index ac35d2b76850..000000000000
--- a/arch/arm/mach-tegra/pinmux.c
+++ /dev/null
@@ -1,987 +0,0 @@
-/*
- * linux/arch/arm/mach-tegra/pinmux.c
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/of_device.h>
-
-#include <mach/iomap.h>
-#include <mach/pinmux.h>
-
-#define HSM_EN(reg)	(((reg) >> 2) & 0x1)
-#define SCHMT_EN(reg)	(((reg) >> 3) & 0x1)
-#define LPMD(reg)	(((reg) >> 4) & 0x3)
-#define DRVDN(reg)	(((reg) >> 12) & 0x1f)
-#define DRVUP(reg)	(((reg) >> 20) & 0x1f)
-#define SLWR(reg)	(((reg) >> 28) & 0x3)
-#define SLWF(reg)	(((reg) >> 30) & 0x3)
-
-static const struct tegra_pingroup_desc *pingroups;
-static const struct tegra_drive_pingroup_desc *drive_pingroups;
-static int pingroup_max;
-static int drive_max;
-
-static char *tegra_mux_names[TEGRA_MAX_MUX] = {
-	[TEGRA_MUX_AHB_CLK] = "AHB_CLK",
-	[TEGRA_MUX_APB_CLK] = "APB_CLK",
-	[TEGRA_MUX_AUDIO_SYNC] = "AUDIO_SYNC",
-	[TEGRA_MUX_CRT] = "CRT",
-	[TEGRA_MUX_DAP1] = "DAP1",
-	[TEGRA_MUX_DAP2] = "DAP2",
-	[TEGRA_MUX_DAP3] = "DAP3",
-	[TEGRA_MUX_DAP4] = "DAP4",
-	[TEGRA_MUX_DAP5] = "DAP5",
-	[TEGRA_MUX_DISPLAYA] = "DISPLAYA",
-	[TEGRA_MUX_DISPLAYB] = "DISPLAYB",
-	[TEGRA_MUX_EMC_TEST0_DLL] = "EMC_TEST0_DLL",
-	[TEGRA_MUX_EMC_TEST1_DLL] = "EMC_TEST1_DLL",
-	[TEGRA_MUX_GMI] = "GMI",
-	[TEGRA_MUX_GMI_INT] = "GMI_INT",
-	[TEGRA_MUX_HDMI] = "HDMI",
-	[TEGRA_MUX_I2C] = "I2C",
-	[TEGRA_MUX_I2C2] = "I2C2",
-	[TEGRA_MUX_I2C3] = "I2C3",
-	[TEGRA_MUX_IDE] = "IDE",
-	[TEGRA_MUX_IRDA] = "IRDA",
-	[TEGRA_MUX_KBC] = "KBC",
-	[TEGRA_MUX_MIO] = "MIO",
-	[TEGRA_MUX_MIPI_HS] = "MIPI_HS",
-	[TEGRA_MUX_NAND] = "NAND",
-	[TEGRA_MUX_OSC] = "OSC",
-	[TEGRA_MUX_OWR] = "OWR",
-	[TEGRA_MUX_PCIE] = "PCIE",
-	[TEGRA_MUX_PLLA_OUT] = "PLLA_OUT",
-	[TEGRA_MUX_PLLC_OUT1] = "PLLC_OUT1",
-	[TEGRA_MUX_PLLM_OUT1] = "PLLM_OUT1",
-	[TEGRA_MUX_PLLP_OUT2] = "PLLP_OUT2",
-	[TEGRA_MUX_PLLP_OUT3] = "PLLP_OUT3",
-	[TEGRA_MUX_PLLP_OUT4] = "PLLP_OUT4",
-	[TEGRA_MUX_PWM] = "PWM",
-	[TEGRA_MUX_PWR_INTR] = "PWR_INTR",
-	[TEGRA_MUX_PWR_ON] = "PWR_ON",
-	[TEGRA_MUX_RTCK] = "RTCK",
-	[TEGRA_MUX_SDIO1] = "SDIO1",
-	[TEGRA_MUX_SDIO2] = "SDIO2",
-	[TEGRA_MUX_SDIO3] = "SDIO3",
-	[TEGRA_MUX_SDIO4] = "SDIO4",
-	[TEGRA_MUX_SFLASH] = "SFLASH",
-	[TEGRA_MUX_SPDIF] = "SPDIF",
-	[TEGRA_MUX_SPI1] = "SPI1",
-	[TEGRA_MUX_SPI2] = "SPI2",
-	[TEGRA_MUX_SPI2_ALT] = "SPI2_ALT",
-	[TEGRA_MUX_SPI3] = "SPI3",
-	[TEGRA_MUX_SPI4] = "SPI4",
-	[TEGRA_MUX_TRACE] = "TRACE",
-	[TEGRA_MUX_TWC] = "TWC",
-	[TEGRA_MUX_UARTA] = "UARTA",
-	[TEGRA_MUX_UARTB] = "UARTB",
-	[TEGRA_MUX_UARTC] = "UARTC",
-	[TEGRA_MUX_UARTD] = "UARTD",
-	[TEGRA_MUX_UARTE] = "UARTE",
-	[TEGRA_MUX_ULPI] = "ULPI",
-	[TEGRA_MUX_VI] = "VI",
-	[TEGRA_MUX_VI_SENSOR_CLK] = "VI_SENSOR_CLK",
-	[TEGRA_MUX_XIO] = "XIO",
-	[TEGRA_MUX_BLINK] = "BLINK",
-	[TEGRA_MUX_CEC] = "CEC",
-	[TEGRA_MUX_CLK12] = "CLK12",
-	[TEGRA_MUX_DAP] = "DAP",
-	[TEGRA_MUX_DAPSDMMC2] = "DAPSDMMC2",
-	[TEGRA_MUX_DDR] = "DDR",
-	[TEGRA_MUX_DEV3] = "DEV3",
-	[TEGRA_MUX_DTV] = "DTV",
-	[TEGRA_MUX_VI_ALT1] = "VI_ALT1",
-	[TEGRA_MUX_VI_ALT2] = "VI_ALT2",
-	[TEGRA_MUX_VI_ALT3] = "VI_ALT3",
-	[TEGRA_MUX_EMC_DLL] = "EMC_DLL",
-	[TEGRA_MUX_EXTPERIPH1] = "EXTPERIPH1",
-	[TEGRA_MUX_EXTPERIPH2] = "EXTPERIPH2",
-	[TEGRA_MUX_EXTPERIPH3] = "EXTPERIPH3",
-	[TEGRA_MUX_GMI_ALT] = "GMI_ALT",
-	[TEGRA_MUX_HDA] = "HDA",
-	[TEGRA_MUX_HSI] = "HSI",
-	[TEGRA_MUX_I2C4] = "I2C4",
-	[TEGRA_MUX_I2C5] = "I2C5",
-	[TEGRA_MUX_I2CPWR] = "I2CPWR",
-	[TEGRA_MUX_I2S0] = "I2S0",
-	[TEGRA_MUX_I2S1] = "I2S1",
-	[TEGRA_MUX_I2S2] = "I2S2",
-	[TEGRA_MUX_I2S3] = "I2S3",
-	[TEGRA_MUX_I2S4] = "I2S4",
-	[TEGRA_MUX_NAND_ALT] = "NAND_ALT",
-	[TEGRA_MUX_POPSDIO4] = "POPSDIO4",
-	[TEGRA_MUX_POPSDMMC4] = "POPSDMMC4",
-	[TEGRA_MUX_PWM0] = "PWM0",
-	[TEGRA_MUX_PWM1] = "PWM2",
-	[TEGRA_MUX_PWM2] = "PWM2",
-	[TEGRA_MUX_PWM3] = "PWM3",
-	[TEGRA_MUX_SATA] = "SATA",
-	[TEGRA_MUX_SPI5] = "SPI5",
-	[TEGRA_MUX_SPI6] = "SPI6",
-	[TEGRA_MUX_SYSCLK] = "SYSCLK",
-	[TEGRA_MUX_VGP1] = "VGP1",
-	[TEGRA_MUX_VGP2] = "VGP2",
-	[TEGRA_MUX_VGP3] = "VGP3",
-	[TEGRA_MUX_VGP4] = "VGP4",
-	[TEGRA_MUX_VGP5] = "VGP5",
-	[TEGRA_MUX_VGP6] = "VGP6",
-	[TEGRA_MUX_SAFE] = "<safe>",
-};
-
-static const char *tegra_drive_names[TEGRA_MAX_DRIVE] = {
-	[TEGRA_DRIVE_DIV_8] = "DIV_8",
-	[TEGRA_DRIVE_DIV_4] = "DIV_4",
-	[TEGRA_DRIVE_DIV_2] = "DIV_2",
-	[TEGRA_DRIVE_DIV_1] = "DIV_1",
-};
-
-static const char *tegra_slew_names[TEGRA_MAX_SLEW] = {
-	[TEGRA_SLEW_FASTEST] = "FASTEST",
-	[TEGRA_SLEW_FAST] = "FAST",
-	[TEGRA_SLEW_SLOW] = "SLOW",
-	[TEGRA_SLEW_SLOWEST] = "SLOWEST",
-};
-
-static DEFINE_SPINLOCK(mux_lock);
-
-static const char *pingroup_name(int pg)
-{
-	if (pg < 0 || pg >=  pingroup_max)
-		return "<UNKNOWN>";
-
-	return pingroups[pg].name;
-}
-
-static const char *func_name(enum tegra_mux_func func)
-{
-	if (func == TEGRA_MUX_RSVD1)
-		return "RSVD1";
-
-	if (func == TEGRA_MUX_RSVD2)
-		return "RSVD2";
-
-	if (func == TEGRA_MUX_RSVD3)
-		return "RSVD3";
-
-	if (func == TEGRA_MUX_RSVD4)
-		return "RSVD4";
-
-	if (func == TEGRA_MUX_NONE)
-		return "NONE";
-
-	if (func < 0 || func >=  TEGRA_MAX_MUX)
-		return "<UNKNOWN>";
-
-	return tegra_mux_names[func];
-}
-
-
-static const char *tri_name(unsigned long val)
-{
-	return val ? "TRISTATE" : "NORMAL";
-}
-
-static const char *pupd_name(unsigned long val)
-{
-	switch (val) {
-	case 0:
-		return "NORMAL";
-
-	case 1:
-		return "PULL_DOWN";
-
-	case 2:
-		return "PULL_UP";
-
-	default:
-		return "RSVD";
-	}
-}
-
-static int nbanks;
-static void __iomem **regs;
-
-static inline u32 pg_readl(u32 bank, u32 reg)
-{
-	return readl(regs[bank] + reg);
-}
-
-static inline void pg_writel(u32 val, u32 bank, u32 reg)
-{
-	writel(val, regs[bank] + reg);
-}
-
-static int tegra_pinmux_set_func(const struct tegra_pingroup_config *config)
-{
-	int mux = -1;
-	int i;
-	unsigned long reg;
-	unsigned long flags;
-	int pg = config->pingroup;
-	enum tegra_mux_func func = config->func;
-
-	if (pg < 0 || pg >=  pingroup_max)
-		return -ERANGE;
-
-	if (pingroups[pg].mux_reg < 0)
-		return -EINVAL;
-
-	if (func < 0)
-		return -ERANGE;
-
-	if (func == TEGRA_MUX_SAFE)
-		func = pingroups[pg].func_safe;
-
-	if (func & TEGRA_MUX_RSVD) {
-		mux = func & 0x3;
-	} else {
-		for (i = 0; i < 4; i++) {
-			if (pingroups[pg].funcs[i] == func) {
-				mux = i;
-				break;
-			}
-		}
-	}
-
-	if (mux < 0)
-		return -EINVAL;
-
-	spin_lock_irqsave(&mux_lock, flags);
-
-	reg = pg_readl(pingroups[pg].mux_bank, pingroups[pg].mux_reg);
-	reg &= ~(0x3 << pingroups[pg].mux_bit);
-	reg |= mux << pingroups[pg].mux_bit;
-	pg_writel(reg, pingroups[pg].mux_bank, pingroups[pg].mux_reg);
-
-	spin_unlock_irqrestore(&mux_lock, flags);
-
-	return 0;
-}
-
-int tegra_pinmux_set_tristate(int pg, enum tegra_tristate tristate)
-{
-	unsigned long reg;
-	unsigned long flags;
-
-	if (pg < 0 || pg >=  pingroup_max)
-		return -ERANGE;
-
-	if (pingroups[pg].tri_reg < 0)
-		return -EINVAL;
-
-	spin_lock_irqsave(&mux_lock, flags);
-
-	reg = pg_readl(pingroups[pg].tri_bank, pingroups[pg].tri_reg);
-	reg &= ~(0x1 << pingroups[pg].tri_bit);
-	if (tristate)
-		reg |= 1 << pingroups[pg].tri_bit;
-	pg_writel(reg, pingroups[pg].tri_bank, pingroups[pg].tri_reg);
-
-	spin_unlock_irqrestore(&mux_lock, flags);
-
-	return 0;
-}
-
-int tegra_pinmux_set_pullupdown(int pg, enum tegra_pullupdown pupd)
-{
-	unsigned long reg;
-	unsigned long flags;
-
-	if (pg < 0 || pg >=  pingroup_max)
-		return -ERANGE;
-
-	if (pingroups[pg].pupd_reg < 0)
-		return -EINVAL;
-
-	if (pupd != TEGRA_PUPD_NORMAL &&
-	    pupd != TEGRA_PUPD_PULL_DOWN &&
-	    pupd != TEGRA_PUPD_PULL_UP)
-		return -EINVAL;
-
-
-	spin_lock_irqsave(&mux_lock, flags);
-
-	reg = pg_readl(pingroups[pg].pupd_bank, pingroups[pg].pupd_reg);
-	reg &= ~(0x3 << pingroups[pg].pupd_bit);
-	reg |= pupd << pingroups[pg].pupd_bit;
-	pg_writel(reg, pingroups[pg].pupd_bank, pingroups[pg].pupd_reg);
-
-	spin_unlock_irqrestore(&mux_lock, flags);
-
-	return 0;
-}
-
-static void tegra_pinmux_config_pingroup(const struct tegra_pingroup_config *config)
-{
-	int pingroup = config->pingroup;
-	enum tegra_mux_func func     = config->func;
-	enum tegra_pullupdown pupd   = config->pupd;
-	enum tegra_tristate tristate = config->tristate;
-	int err;
-
-	if (pingroups[pingroup].mux_reg >= 0) {
-		err = tegra_pinmux_set_func(config);
-		if (err < 0)
-			pr_err("pinmux: can't set pingroup %s func to %s: %d\n",
-			       pingroup_name(pingroup), func_name(func), err);
-	}
-
-	if (pingroups[pingroup].pupd_reg >= 0) {
-		err = tegra_pinmux_set_pullupdown(pingroup, pupd);
-		if (err < 0)
-			pr_err("pinmux: can't set pingroup %s pullupdown to %s: %d\n",
-			       pingroup_name(pingroup), pupd_name(pupd), err);
-	}
-
-	if (pingroups[pingroup].tri_reg >= 0) {
-		err = tegra_pinmux_set_tristate(pingroup, tristate);
-		if (err < 0)
-			pr_err("pinmux: can't set pingroup %s tristate to %s: %d\n",
-			       pingroup_name(pingroup), tri_name(func), err);
-	}
-}
-
-void tegra_pinmux_config_table(const struct tegra_pingroup_config *config, int len)
-{
-	int i;
-
-	for (i = 0; i < len; i++)
-		tegra_pinmux_config_pingroup(&config[i]);
-}
-
-static const char *drive_pinmux_name(int pg)
-{
-	if (pg < 0 || pg >=  drive_max)
-		return "<UNKNOWN>";
-
-	return drive_pingroups[pg].name;
-}
-
-static const char *enable_name(unsigned long val)
-{
-	return val ? "ENABLE" : "DISABLE";
-}
-
-static const char *drive_name(unsigned long val)
-{
-	if (val >= TEGRA_MAX_DRIVE)
-		return "<UNKNOWN>";
-
-	return tegra_drive_names[val];
-}
-
-static const char *slew_name(unsigned long val)
-{
-	if (val >= TEGRA_MAX_SLEW)
-		return "<UNKNOWN>";
-
-	return tegra_slew_names[val];
-}
-
-static int tegra_drive_pinmux_set_hsm(int pg, enum tegra_hsm hsm)
-{
-	unsigned long flags;
-	u32 reg;
-	if (pg < 0 || pg >=  drive_max)
-		return -ERANGE;
-
-	if (hsm != TEGRA_HSM_ENABLE && hsm != TEGRA_HSM_DISABLE)
-		return -EINVAL;
-
-	spin_lock_irqsave(&mux_lock, flags);
-
-	reg = pg_readl(drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
-	if (hsm == TEGRA_HSM_ENABLE)
-		reg |= (1 << 2);
-	else
-		reg &= ~(1 << 2);
-	pg_writel(reg, drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
-
-	spin_unlock_irqrestore(&mux_lock, flags);
-
-	return 0;
-}
-
-static int tegra_drive_pinmux_set_schmitt(int pg, enum tegra_schmitt schmitt)
-{
-	unsigned long flags;
-	u32 reg;
-	if (pg < 0 || pg >=  drive_max)
-		return -ERANGE;
-
-	if (schmitt != TEGRA_SCHMITT_ENABLE && schmitt != TEGRA_SCHMITT_DISABLE)
-		return -EINVAL;
-
-	spin_lock_irqsave(&mux_lock, flags);
-
-	reg = pg_readl(drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
-	if (schmitt == TEGRA_SCHMITT_ENABLE)
-		reg |= (1 << 3);
-	else
-		reg &= ~(1 << 3);
-	pg_writel(reg, drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
-
-	spin_unlock_irqrestore(&mux_lock, flags);
-
-	return 0;
-}
-
-static int tegra_drive_pinmux_set_drive(int pg, enum tegra_drive drive)
-{
-	unsigned long flags;
-	u32 reg;
-	if (pg < 0 || pg >=  drive_max)
-		return -ERANGE;
-
-	if (drive < 0 || drive >= TEGRA_MAX_DRIVE)
-		return -EINVAL;
-
-	spin_lock_irqsave(&mux_lock, flags);
-
-	reg = pg_readl(drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
-	reg &= ~(0x3 << 4);
-	reg |= drive << 4;
-	pg_writel(reg, drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
-
-	spin_unlock_irqrestore(&mux_lock, flags);
-
-	return 0;
-}
-
-static int tegra_drive_pinmux_set_pull_down(int pg,
-	enum tegra_pull_strength pull_down)
-{
-	unsigned long flags;
-	u32 reg;
-	if (pg < 0 || pg >=  drive_max)
-		return -ERANGE;
-
-	if (pull_down < 0 || pull_down >= TEGRA_MAX_PULL)
-		return -EINVAL;
-
-	spin_lock_irqsave(&mux_lock, flags);
-
-	reg = pg_readl(drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
-	reg &= ~(0x1f << 12);
-	reg |= pull_down << 12;
-	pg_writel(reg, drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
-
-	spin_unlock_irqrestore(&mux_lock, flags);
-
-	return 0;
-}
-
-static int tegra_drive_pinmux_set_pull_up(int pg,
-	enum tegra_pull_strength pull_up)
-{
-	unsigned long flags;
-	u32 reg;
-	if (pg < 0 || pg >=  drive_max)
-		return -ERANGE;
-
-	if (pull_up < 0 || pull_up >= TEGRA_MAX_PULL)
-		return -EINVAL;
-
-	spin_lock_irqsave(&mux_lock, flags);
-
-	reg = pg_readl(drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
-	reg &= ~(0x1f << 12);
-	reg |= pull_up << 12;
-	pg_writel(reg, drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
-
-	spin_unlock_irqrestore(&mux_lock, flags);
-
-	return 0;
-}
-
-static int tegra_drive_pinmux_set_slew_rising(int pg,
-	enum tegra_slew slew_rising)
-{
-	unsigned long flags;
-	u32 reg;
-	if (pg < 0 || pg >=  drive_max)
-		return -ERANGE;
-
-	if (slew_rising < 0 || slew_rising >= TEGRA_MAX_SLEW)
-		return -EINVAL;
-
-	spin_lock_irqsave(&mux_lock, flags);
-
-	reg = pg_readl(drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
-	reg &= ~(0x3 << 28);
-	reg |= slew_rising << 28;
-	pg_writel(reg, drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
-
-	spin_unlock_irqrestore(&mux_lock, flags);
-
-	return 0;
-}
-
-static int tegra_drive_pinmux_set_slew_falling(int pg,
-	enum tegra_slew slew_falling)
-{
-	unsigned long flags;
-	u32 reg;
-	if (pg < 0 || pg >=  drive_max)
-		return -ERANGE;
-
-	if (slew_falling < 0 || slew_falling >= TEGRA_MAX_SLEW)
-		return -EINVAL;
-
-	spin_lock_irqsave(&mux_lock, flags);
-
-	reg = pg_readl(drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
-	reg &= ~(0x3 << 30);
-	reg |= slew_falling << 30;
-	pg_writel(reg, drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
-
-	spin_unlock_irqrestore(&mux_lock, flags);
-
-	return 0;
-}
-
-static void tegra_drive_pinmux_config_pingroup(int pingroup,
-					  enum tegra_hsm hsm,
-					  enum tegra_schmitt schmitt,
-					  enum tegra_drive drive,
-					  enum tegra_pull_strength pull_down,
-					  enum tegra_pull_strength pull_up,
-					  enum tegra_slew slew_rising,
-					  enum tegra_slew slew_falling)
-{
-	int err;
-
-	err = tegra_drive_pinmux_set_hsm(pingroup, hsm);
-	if (err < 0)
-		pr_err("pinmux: can't set pingroup %s hsm to %s: %d\n",
-			drive_pinmux_name(pingroup),
-			enable_name(hsm), err);
-
-	err = tegra_drive_pinmux_set_schmitt(pingroup, schmitt);
-	if (err < 0)
-		pr_err("pinmux: can't set pingroup %s schmitt to %s: %d\n",
-			drive_pinmux_name(pingroup),
-			enable_name(schmitt), err);
-
-	err = tegra_drive_pinmux_set_drive(pingroup, drive);
-	if (err < 0)
-		pr_err("pinmux: can't set pingroup %s drive to %s: %d\n",
-			drive_pinmux_name(pingroup),
-			drive_name(drive), err);
-
-	err = tegra_drive_pinmux_set_pull_down(pingroup, pull_down);
-	if (err < 0)
-		pr_err("pinmux: can't set pingroup %s pull down to %d: %d\n",
-			drive_pinmux_name(pingroup),
-			pull_down, err);
-
-	err = tegra_drive_pinmux_set_pull_up(pingroup, pull_up);
-	if (err < 0)
-		pr_err("pinmux: can't set pingroup %s pull up to %d: %d\n",
-			drive_pinmux_name(pingroup),
-			pull_up, err);
-
-	err = tegra_drive_pinmux_set_slew_rising(pingroup, slew_rising);
-	if (err < 0)
-		pr_err("pinmux: can't set pingroup %s rising slew to %s: %d\n",
-			drive_pinmux_name(pingroup),
-			slew_name(slew_rising), err);
-
-	err = tegra_drive_pinmux_set_slew_falling(pingroup, slew_falling);
-	if (err < 0)
-		pr_err("pinmux: can't set pingroup %s falling slew to %s: %d\n",
-			drive_pinmux_name(pingroup),
-			slew_name(slew_falling), err);
-}
-
-void tegra_drive_pinmux_config_table(struct tegra_drive_pingroup_config *config,
-	int len)
-{
-	int i;
-
-	for (i = 0; i < len; i++)
-		tegra_drive_pinmux_config_pingroup(config[i].pingroup,
-						     config[i].hsm,
-						     config[i].schmitt,
-						     config[i].drive,
-						     config[i].pull_down,
-						     config[i].pull_up,
-						     config[i].slew_rising,
-						     config[i].slew_falling);
-}
-
-void tegra_pinmux_set_safe_pinmux_table(const struct tegra_pingroup_config *config,
-	int len)
-{
-	int i;
-	struct tegra_pingroup_config c;
-
-	for (i = 0; i < len; i++) {
-		int err;
-		c = config[i];
-		if (c.pingroup < 0 || c.pingroup >= pingroup_max) {
-			WARN_ON(1);
-			continue;
-		}
-		c.func = pingroups[c.pingroup].func_safe;
-		err = tegra_pinmux_set_func(&c);
-		if (err < 0)
-			pr_err("%s: tegra_pinmux_set_func returned %d setting "
-			       "%s to %s\n", __func__, err,
-			       pingroup_name(c.pingroup), func_name(c.func));
-	}
-}
-
-void tegra_pinmux_config_pinmux_table(const struct tegra_pingroup_config *config,
-	int len)
-{
-	int i;
-
-	for (i = 0; i < len; i++) {
-		int err;
-		if (config[i].pingroup < 0 ||
-		    config[i].pingroup >= pingroup_max) {
-			WARN_ON(1);
-			continue;
-		}
-		err = tegra_pinmux_set_func(&config[i]);
-		if (err < 0)
-			pr_err("%s: tegra_pinmux_set_func returned %d setting "
-			       "%s to %s\n", __func__, err,
-			       pingroup_name(config[i].pingroup),
-			       func_name(config[i].func));
-	}
-}
-
-void tegra_pinmux_config_tristate_table(const struct tegra_pingroup_config *config,
-	int len, enum tegra_tristate tristate)
-{
-	int i;
-	int err;
-	int pingroup;
-
-	for (i = 0; i < len; i++) {
-		pingroup = config[i].pingroup;
-		if (pingroups[pingroup].tri_reg >= 0) {
-			err = tegra_pinmux_set_tristate(pingroup, tristate);
-			if (err < 0)
-				pr_err("pinmux: can't set pingroup %s tristate"
-					" to %s: %d\n",	pingroup_name(pingroup),
-					tri_name(tristate), err);
-		}
-	}
-}
-
-void tegra_pinmux_config_pullupdown_table(const struct tegra_pingroup_config *config,
-	int len, enum tegra_pullupdown pupd)
-{
-	int i;
-	int err;
-	int pingroup;
-
-	for (i = 0; i < len; i++) {
-		pingroup = config[i].pingroup;
-		if (pingroups[pingroup].pupd_reg >= 0) {
-			err = tegra_pinmux_set_pullupdown(pingroup, pupd);
-			if (err < 0)
-				pr_err("pinmux: can't set pingroup %s pullupdown"
-					" to %s: %d\n",	pingroup_name(pingroup),
-					pupd_name(pupd), err);
-		}
-	}
-}
-
-static struct of_device_id tegra_pinmux_of_match[] __devinitdata = {
-#ifdef CONFIG_ARCH_TEGRA_2x_SOC
-	{ .compatible = "nvidia,tegra20-pinmux", tegra20_pinmux_init },
-#endif
-#ifdef CONFIG_ARCH_TEGRA_3x_SOC
-	{ .compatible = "nvidia,tegra30-pinmux", tegra30_pinmux_init },
-#endif
-	{ },
-};
-
-static int __devinit tegra_pinmux_probe(struct platform_device *pdev)
-{
-	struct resource *res;
-	int i;
-	int config_bad = 0;
-	const struct of_device_id *match;
-
-	match = of_match_device(tegra_pinmux_of_match, &pdev->dev);
-
-	if (match)
-		((pinmux_init)(match->data))(&pingroups, &pingroup_max,
-			&drive_pingroups, &drive_max);
-#ifdef CONFIG_ARCH_TEGRA_2x_SOC
-	else
-		/* no device tree available, so we must be on tegra20 */
-		tegra20_pinmux_init(&pingroups, &pingroup_max,
-					&drive_pingroups, &drive_max);
-#else
-	pr_warn("non Tegra20 platform requires pinmux devicetree node\n");
-#endif
-
-	for (i = 0; ; i++) {
-		res = platform_get_resource(pdev, IORESOURCE_MEM, i);
-		if (!res)
-			break;
-	}
-	nbanks = i;
-
-	for (i = 0; i < pingroup_max; i++) {
-		if (pingroups[i].tri_bank >= nbanks) {
-			dev_err(&pdev->dev, "pingroup %d: bad tri_bank\n", i);
-			config_bad = 1;
-		}
-
-		if (pingroups[i].mux_bank >= nbanks) {
-			dev_err(&pdev->dev, "pingroup %d: bad mux_bank\n", i);
-			config_bad = 1;
-		}
-
-		if (pingroups[i].pupd_bank >= nbanks) {
-			dev_err(&pdev->dev, "pingroup %d: bad pupd_bank\n", i);
-			config_bad = 1;
-		}
-	}
-
-	for (i = 0; i < drive_max; i++) {
-		if (drive_pingroups[i].reg_bank >= nbanks) {
-			dev_err(&pdev->dev,
-				"drive pingroup %d: bad reg_bank\n", i);
-			config_bad = 1;
-		}
-	}
-
-	if (config_bad)
-		return -ENODEV;
-
-	regs = devm_kzalloc(&pdev->dev, nbanks * sizeof(*regs), GFP_KERNEL);
-	if (!regs) {
-		dev_err(&pdev->dev, "Can't alloc regs pointer\n");
-		return -ENODEV;
-	}
-
-	for (i = 0; i < nbanks; i++) {
-		res = platform_get_resource(pdev, IORESOURCE_MEM, i);
-		if (!res) {
-			dev_err(&pdev->dev, "Missing MEM resource\n");
-			return -ENODEV;
-		}
-
-		if (!devm_request_mem_region(&pdev->dev, res->start,
-					    resource_size(res),
-					    dev_name(&pdev->dev))) {
-			dev_err(&pdev->dev,
-				"Couldn't request MEM resource %d\n", i);
-			return -ENODEV;
-		}
-
-		regs[i] = devm_ioremap(&pdev->dev, res->start,
-					resource_size(res));
-		if (!regs) {
-			dev_err(&pdev->dev, "Couldn't ioremap regs %d\n", i);
-			return -ENODEV;
-		}
-	}
-
-	return 0;
-}
-
-static struct platform_driver tegra_pinmux_driver = {
-	.driver		= {
-		.name	= "tegra-pinmux",
-		.owner	= THIS_MODULE,
-		.of_match_table = tegra_pinmux_of_match,
-	},
-	.probe		= tegra_pinmux_probe,
-};
-
-static int __init tegra_pinmux_init(void)
-{
-	return platform_driver_register(&tegra_pinmux_driver);
-}
-postcore_initcall(tegra_pinmux_init);
-
-#ifdef	CONFIG_DEBUG_FS
-
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-
-static void dbg_pad_field(struct seq_file *s, int len)
-{
-	seq_putc(s, ',');
-
-	while (len-- > -1)
-		seq_putc(s, ' ');
-}
-
-static int dbg_pinmux_show(struct seq_file *s, void *unused)
-{
-	int i;
-	int len;
-
-	for (i = 0; i < pingroup_max; i++) {
-		unsigned long reg;
-		unsigned long tri;
-		unsigned long mux;
-		unsigned long pupd;
-
-		seq_printf(s, "\t{TEGRA_PINGROUP_%s", pingroups[i].name);
-		len = strlen(pingroups[i].name);
-		dbg_pad_field(s, 5 - len);
-
-		if (pingroups[i].mux_reg < 0) {
-			seq_printf(s, "TEGRA_MUX_NONE");
-			len = strlen("NONE");
-		} else {
-			reg = pg_readl(pingroups[i].mux_bank,
-					pingroups[i].mux_reg);
-			mux = (reg >> pingroups[i].mux_bit) & 0x3;
-			if (pingroups[i].funcs[mux] == TEGRA_MUX_RSVD) {
-				seq_printf(s, "TEGRA_MUX_RSVD%1lu", mux+1);
-				len = 5;
-			} else {
-				seq_printf(s, "TEGRA_MUX_%s",
-					   tegra_mux_names[pingroups[i].funcs[mux]]);
-				len = strlen(tegra_mux_names[pingroups[i].funcs[mux]]);
-			}
-		}
-		dbg_pad_field(s, 13-len);
-
-		if (pingroups[i].pupd_reg < 0) {
-			seq_printf(s, "TEGRA_PUPD_NORMAL");
-			len = strlen("NORMAL");
-		} else {
-			reg = pg_readl(pingroups[i].pupd_bank,
-					pingroups[i].pupd_reg);
-			pupd = (reg >> pingroups[i].pupd_bit) & 0x3;
-			seq_printf(s, "TEGRA_PUPD_%s", pupd_name(pupd));
-			len = strlen(pupd_name(pupd));
-		}
-		dbg_pad_field(s, 9 - len);
-
-		if (pingroups[i].tri_reg < 0) {
-			seq_printf(s, "TEGRA_TRI_NORMAL");
-		} else {
-			reg = pg_readl(pingroups[i].tri_bank,
-					pingroups[i].tri_reg);
-			tri = (reg >> pingroups[i].tri_bit) & 0x1;
-
-			seq_printf(s, "TEGRA_TRI_%s", tri_name(tri));
-		}
-		seq_printf(s, "},\n");
-	}
-	return 0;
-}
-
-static int dbg_pinmux_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, dbg_pinmux_show, &inode->i_private);
-}
-
-static const struct file_operations debug_fops = {
-	.open		= dbg_pinmux_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
-static int dbg_drive_pinmux_show(struct seq_file *s, void *unused)
-{
-	int i;
-	int len;
-
-	for (i = 0; i < drive_max; i++) {
-		u32 reg;
-
-		seq_printf(s, "\t{TEGRA_DRIVE_PINGROUP_%s",
-			drive_pingroups[i].name);
-		len = strlen(drive_pingroups[i].name);
-		dbg_pad_field(s, 7 - len);
-
-
-		reg = pg_readl(drive_pingroups[i].reg_bank,
-				drive_pingroups[i].reg);
-		if (HSM_EN(reg)) {
-			seq_printf(s, "TEGRA_HSM_ENABLE");
-			len = 16;
-		} else {
-			seq_printf(s, "TEGRA_HSM_DISABLE");
-			len = 17;
-		}
-		dbg_pad_field(s, 17 - len);
-
-		if (SCHMT_EN(reg)) {
-			seq_printf(s, "TEGRA_SCHMITT_ENABLE");
-			len = 21;
-		} else {
-			seq_printf(s, "TEGRA_SCHMITT_DISABLE");
-			len = 22;
-		}
-		dbg_pad_field(s, 22 - len);
-
-		seq_printf(s, "TEGRA_DRIVE_%s", drive_name(LPMD(reg)));
-		len = strlen(drive_name(LPMD(reg)));
-		dbg_pad_field(s, 5 - len);
-
-		seq_printf(s, "TEGRA_PULL_%d", DRVDN(reg));
-		len = DRVDN(reg) < 10 ? 1 : 2;
-		dbg_pad_field(s, 2 - len);
-
-		seq_printf(s, "TEGRA_PULL_%d", DRVUP(reg));
-		len = DRVUP(reg) < 10 ? 1 : 2;
-		dbg_pad_field(s, 2 - len);
-
-		seq_printf(s, "TEGRA_SLEW_%s", slew_name(SLWR(reg)));
-		len = strlen(slew_name(SLWR(reg)));
-		dbg_pad_field(s, 7 - len);
-
-		seq_printf(s, "TEGRA_SLEW_%s", slew_name(SLWF(reg)));
-
-		seq_printf(s, "},\n");
-	}
-	return 0;
-}
-
-static int dbg_drive_pinmux_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, dbg_drive_pinmux_show, &inode->i_private);
-}
-
-static const struct file_operations debug_drive_fops = {
-	.open		= dbg_drive_pinmux_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
-static int __init tegra_pinmux_debuginit(void)
-{
-	(void) debugfs_create_file("tegra_pinmux", S_IRUGO,
-					NULL, NULL, &debug_fops);
-	(void) debugfs_create_file("tegra_pinmux_drive", S_IRUGO,
-					NULL, NULL, &debug_drive_fops);
-	return 0;
-}
-late_initcall(tegra_pinmux_debuginit);
-#endif
diff --git a/arch/arm/mach-tegra/powergate.c b/arch/arm/mach-tegra/powergate.c
index c238699ae86f..f5b12fb4ff12 100644
--- a/arch/arm/mach-tegra/powergate.c
+++ b/arch/arm/mach-tegra/powergate.c
@@ -234,7 +234,7 @@ static const struct file_operations powergate_fops = {
 	.release	= single_release,
 };
 
-static int __init powergate_debugfs_init(void)
+int __init tegra_powergate_debugfs_init(void)
 {
 	struct dentry *d;
 	int err = -ENOMEM;
@@ -247,6 +247,4 @@ static int __init powergate_debugfs_init(void)
 	return err;
 }
 
-late_initcall(powergate_debugfs_init);
-
 #endif
diff --git a/arch/arm/mach-tegra/tegra2_clocks.c b/arch/arm/mach-tegra/tegra2_clocks.c
index 592a4eeb5328..b59315ce3691 100644
--- a/arch/arm/mach-tegra/tegra2_clocks.c
+++ b/arch/arm/mach-tegra/tegra2_clocks.c
@@ -1486,6 +1486,10 @@ static struct clk tegra_clk_m = {
 };
 
 static struct clk_pll_freq_table tegra_pll_c_freq_table[] = {
+	{ 12000000, 600000000, 600, 12, 1, 8 },
+	{ 13000000, 600000000, 600, 13, 1, 8 },
+	{ 19200000, 600000000, 500, 16, 1, 6 },
+	{ 26000000, 600000000, 600, 26, 1, 8 },
 	{ 0, 0, 0, 0, 0, 0 },
 };
 
@@ -1764,6 +1768,12 @@ static struct clk_pll_freq_table tegra_pll_x_freq_table[] = {
 	{ 19200000, 760000000,  950,  24, 1, 8},
 	{ 26000000, 760000000,  760,  26, 1, 12},
 
+	/* 750 MHz */
+	{ 12000000, 750000000,  750,  12, 1, 12},
+	{ 13000000, 750000000,  750,  13, 1, 12},
+	{ 19200000, 750000000,  625,  16, 1, 8},
+	{ 26000000, 750000000,  750,  26, 1, 12},
+
 	/* 608 MHz */
 	{ 12000000, 608000000,  608,  12, 1, 12},
 	{ 13000000, 608000000,  608,  13, 1, 12},
@@ -2142,8 +2152,8 @@ static struct clk tegra_list_clks[] = {
 	PERIPH_CLK("apbdma",	"tegra-dma",		NULL,	34,	0,	108000000, mux_pclk,			0),
 	PERIPH_CLK("rtc",	"rtc-tegra",		NULL,	4,	0,	32768,     mux_clk_32k,			PERIPH_NO_RESET),
 	PERIPH_CLK("timer",	"timer",		NULL,	5,	0,	26000000,  mux_clk_m,			0),
-	PERIPH_CLK("i2s1",	"tegra-i2s.0",		NULL,	11,	0x100,	26000000,  mux_pllaout0_audio2x_pllp_clkm,	MUX | DIV_U71),
-	PERIPH_CLK("i2s2",	"tegra-i2s.1",		NULL,	18,	0x104,	26000000,  mux_pllaout0_audio2x_pllp_clkm,	MUX | DIV_U71),
+	PERIPH_CLK("i2s1",	"tegra20-i2s.0",	NULL,	11,	0x100,	26000000,  mux_pllaout0_audio2x_pllp_clkm,	MUX | DIV_U71),
+	PERIPH_CLK("i2s2",	"tegra20-i2s.1",	NULL,	18,	0x104,	26000000,  mux_pllaout0_audio2x_pllp_clkm,	MUX | DIV_U71),
 	PERIPH_CLK("spdif_out",	"spdif_out",		NULL,	10,	0x108,	100000000, mux_pllaout0_audio2x_pllp_clkm,	MUX | DIV_U71),
 	PERIPH_CLK("spdif_in",	"spdif_in",		NULL,	10,	0x10c,	100000000, mux_pllp_pllc_pllm,		MUX | DIV_U71),
 	PERIPH_CLK("pwm",	"pwm",			NULL,	17,	0x110,	432000000, mux_pllp_pllc_audio_clkm_clk32,	MUX | DIV_U71),
diff --git a/arch/arm/mach-tegra/tegra30_clocks.c b/arch/arm/mach-tegra/tegra30_clocks.c
index 6d08b53f92d2..e33fe4b14a2a 100644
--- a/arch/arm/mach-tegra/tegra30_clocks.c
+++ b/arch/arm/mach-tegra/tegra30_clocks.c
@@ -3015,6 +3015,15 @@ struct clk_duplicate tegra_clk_duplicates[] = {
 	CLK_DUPLICATE("sbc6", "spi_slave_tegra.5", NULL),
 	CLK_DUPLICATE("twd", "smp_twd", NULL),
 	CLK_DUPLICATE("vcp", "nvavp", "vcp"),
+	CLK_DUPLICATE("i2s0", NULL, "i2s0"),
+	CLK_DUPLICATE("i2s1", NULL, "i2s1"),
+	CLK_DUPLICATE("i2s2", NULL, "i2s2"),
+	CLK_DUPLICATE("i2s3", NULL, "i2s3"),
+	CLK_DUPLICATE("i2s4", NULL, "i2s4"),
+	CLK_DUPLICATE("dam0", NULL, "dam0"),
+	CLK_DUPLICATE("dam1", NULL, "dam1"),
+	CLK_DUPLICATE("dam2", NULL, "dam2"),
+	CLK_DUPLICATE("spdif_in", NULL, "spdif_in"),
 };
 
 struct clk *tegra_ptr_clks[] = {
diff --git a/arch/arm/mach-tegra/timer.c b/arch/arm/mach-tegra/timer.c
index 1eed8d4a80ef..315672c7bd48 100644
--- a/arch/arm/mach-tegra/timer.c
+++ b/arch/arm/mach-tegra/timer.c
@@ -124,7 +124,7 @@ static u64 tegra_rtc_read_ms(void)
 }
 
 /*
- * read_persistent_clock -  Return time from a persistent clock.
+ * tegra_read_persistent_clock -  Return time from a persistent clock.
  *
  * Reads the time from a source which isn't disabled during PM, the
  * 32k sync timer.  Convert the cycles elapsed since last read into
@@ -133,7 +133,7 @@ static u64 tegra_rtc_read_ms(void)
  * tegra_rtc driver could be executing to avoid race conditions
  * on the RTC shadow register
  */
-void read_persistent_clock(struct timespec *ts)
+static void tegra_read_persistent_clock(struct timespec *ts)
 {
 	u64 delta;
 	struct timespec *tsp = &persistent_ts;
@@ -243,6 +243,7 @@ static void __init tegra_init_timer(void)
 	tegra_clockevent.irq = tegra_timer_irq.irq;
 	clockevents_register_device(&tegra_clockevent);
 	tegra_twd_init();
+	register_persistent_clock(NULL, tegra_read_persistent_clock);
 }
 
 struct sys_timer tegra_timer = {
diff --git a/arch/arm/mach-tegra/usb_phy.c b/arch/arm/mach-tegra/usb_phy.c
index c5b2ac04e2a0..54e353c8e304 100644
--- a/arch/arm/mach-tegra/usb_phy.c
+++ b/arch/arm/mach-tegra/usb_phy.c
@@ -26,6 +26,7 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
+#include <linux/of_gpio.h>
 #include <linux/usb/otg.h>
 #include <linux/usb/ulpi.h>
 #include <asm/mach-types.h>
@@ -654,8 +655,8 @@ static void ulpi_phy_power_off(struct tegra_usb_phy *phy)
 	clk_disable(phy->clk);
 }
 
-struct tegra_usb_phy *tegra_usb_phy_open(int instance, void __iomem *regs,
-			void *config, enum tegra_usb_phy_mode phy_mode)
+struct tegra_usb_phy *tegra_usb_phy_open(struct device *dev, int instance,
+	void __iomem *regs, void *config, enum tegra_usb_phy_mode phy_mode)
 {
 	struct tegra_usb_phy *phy;
 	struct tegra_ulpi_config *ulpi_config;
@@ -711,7 +712,16 @@ struct tegra_usb_phy *tegra_usb_phy_open(int instance, void __iomem *regs,
 			err = -ENXIO;
 			goto err1;
 		}
-		tegra_gpio_enable(ulpi_config->reset_gpio);
+		if (!gpio_is_valid(ulpi_config->reset_gpio))
+			ulpi_config->reset_gpio =
+				of_get_named_gpio(dev->of_node,
+						  "nvidia,phy-reset-gpio", 0);
+		if (!gpio_is_valid(ulpi_config->reset_gpio)) {
+			pr_err("%s: invalid reset gpio: %d\n", __func__,
+			       ulpi_config->reset_gpio);
+			err = -EINVAL;
+			goto err1;
+		}
 		gpio_request(ulpi_config->reset_gpio, "ulpi_phy_reset_b");
 		gpio_direction_output(ulpi_config->reset_gpio, 0);
 		phy->ulpi = otg_ulpi_create(&ulpi_viewport_access_ops, 0);
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index 1621ad07d284..33339745d432 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -1667,8 +1667,10 @@ void __init u300_init_irq(void)
 
 	for (i = 0; i < U300_VIC_IRQS_END; i++)
 		set_bit(i, (unsigned long *) &mask[0]);
-	vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], mask[0]);
-	vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], mask[1]);
+	vic_init((void __iomem *) U300_INTCON0_VBASE, IRQ_U300_INTCON0_START,
+		 mask[0], mask[0]);
+	vic_init((void __iomem *) U300_INTCON1_VBASE, IRQ_U300_INTCON1_START,
+		 mask[1], mask[1]);
 }
 
 
diff --git a/arch/arm/mach-u300/i2c.c b/arch/arm/mach-u300/i2c.c
index a38f80238ea9..cb04bd6ab3e7 100644
--- a/arch/arm/mach-u300/i2c.c
+++ b/arch/arm/mach-u300/i2c.c
@@ -146,9 +146,6 @@ static struct ab3100_platform_data ab3100_plf_data = {
 				.min_uV = 1800000,
 				.max_uV = 1800000,
 				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.valid_ops_mask =
-				REGULATOR_CHANGE_VOLTAGE |
-				REGULATOR_CHANGE_STATUS,
 				.always_on = 1,
 				.boot_on = 1,
 			},
@@ -160,9 +157,6 @@ static struct ab3100_platform_data ab3100_plf_data = {
 				.min_uV = 2500000,
 				.max_uV = 2500000,
 				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.valid_ops_mask =
-				REGULATOR_CHANGE_VOLTAGE |
-				REGULATOR_CHANGE_STATUS,
 				.always_on = 1,
 				.boot_on = 1,
 			},
@@ -230,8 +224,7 @@ static struct ab3100_platform_data ab3100_plf_data = {
 				.max_uV = 1800000,
 				.valid_modes_mask = REGULATOR_MODE_NORMAL,
 				.valid_ops_mask =
-				REGULATOR_CHANGE_VOLTAGE |
-				REGULATOR_CHANGE_STATUS,
+				REGULATOR_CHANGE_VOLTAGE,
 				.always_on = 1,
 				.boot_on = 1,
 			},
diff --git a/arch/arm/mach-u300/include/mach/irqs.h b/arch/arm/mach-u300/include/mach/irqs.h
index ee78a26707eb..ec09c1e07b1a 100644
--- a/arch/arm/mach-u300/include/mach/irqs.h
+++ b/arch/arm/mach-u300/include/mach/irqs.h
@@ -12,101 +12,101 @@
 #ifndef __MACH_IRQS_H
 #define __MACH_IRQS_H
 
-#define IRQ_U300_INTCON0_START		0
-#define IRQ_U300_INTCON1_START		32
+#define IRQ_U300_INTCON0_START		1
+#define IRQ_U300_INTCON1_START		33
 /* These are on INTCON0 - 30 lines */
-#define IRQ_U300_IRQ0_EXT		0
-#define IRQ_U300_IRQ1_EXT		1
-#define IRQ_U300_DMA			2
-#define IRQ_U300_VIDEO_ENC_0		3
-#define IRQ_U300_VIDEO_ENC_1		4
-#define IRQ_U300_AAIF_RX		5
-#define IRQ_U300_AAIF_TX		6
-#define IRQ_U300_AAIF_VGPIO		7
-#define IRQ_U300_AAIF_WAKEUP		8
-#define IRQ_U300_PCM_I2S0_FRAME		9
-#define IRQ_U300_PCM_I2S0_FIFO		10
-#define IRQ_U300_PCM_I2S1_FRAME		11
-#define IRQ_U300_PCM_I2S1_FIFO		12
-#define IRQ_U300_XGAM_GAMCON		13
-#define IRQ_U300_XGAM_CDI		14
-#define IRQ_U300_XGAM_CDICON		15
+#define IRQ_U300_IRQ0_EXT		1
+#define IRQ_U300_IRQ1_EXT		2
+#define IRQ_U300_DMA			3
+#define IRQ_U300_VIDEO_ENC_0		4
+#define IRQ_U300_VIDEO_ENC_1		5
+#define IRQ_U300_AAIF_RX		6
+#define IRQ_U300_AAIF_TX		7
+#define IRQ_U300_AAIF_VGPIO		8
+#define IRQ_U300_AAIF_WAKEUP		9
+#define IRQ_U300_PCM_I2S0_FRAME		10
+#define IRQ_U300_PCM_I2S0_FIFO		11
+#define IRQ_U300_PCM_I2S1_FRAME		12
+#define IRQ_U300_PCM_I2S1_FIFO		13
+#define IRQ_U300_XGAM_GAMCON		14
+#define IRQ_U300_XGAM_CDI		15
+#define IRQ_U300_XGAM_CDICON		16
 #if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
 /* MMIACC not used on the DB3210 or DB3350 chips */
-#define IRQ_U300_XGAM_MMIACC		16
+#define IRQ_U300_XGAM_MMIACC		17
 #endif
-#define IRQ_U300_XGAM_PDI		17
-#define IRQ_U300_XGAM_PDICON		18
-#define IRQ_U300_XGAM_GAMEACC		19
-#define IRQ_U300_XGAM_MCIDCT		20
-#define IRQ_U300_APEX			21
-#define IRQ_U300_UART0			22
-#define IRQ_U300_SPI			23
-#define IRQ_U300_TIMER_APP_OS		24
-#define IRQ_U300_TIMER_APP_DD		25
-#define IRQ_U300_TIMER_APP_GP1		26
-#define IRQ_U300_TIMER_APP_GP2		27
-#define IRQ_U300_TIMER_OS		28
-#define IRQ_U300_TIMER_MS		29
-#define IRQ_U300_KEYPAD_KEYBF		30
-#define IRQ_U300_KEYPAD_KEYBR		31
+#define IRQ_U300_XGAM_PDI		18
+#define IRQ_U300_XGAM_PDICON		19
+#define IRQ_U300_XGAM_GAMEACC		20
+#define IRQ_U300_XGAM_MCIDCT		21
+#define IRQ_U300_APEX			22
+#define IRQ_U300_UART0			23
+#define IRQ_U300_SPI			24
+#define IRQ_U300_TIMER_APP_OS		25
+#define IRQ_U300_TIMER_APP_DD		26
+#define IRQ_U300_TIMER_APP_GP1		27
+#define IRQ_U300_TIMER_APP_GP2		28
+#define IRQ_U300_TIMER_OS		29
+#define IRQ_U300_TIMER_MS		30
+#define IRQ_U300_KEYPAD_KEYBF		31
+#define IRQ_U300_KEYPAD_KEYBR		32
 /* These are on INTCON1 - 32 lines */
-#define IRQ_U300_GPIO_PORT0		32
-#define IRQ_U300_GPIO_PORT1		33
-#define IRQ_U300_GPIO_PORT2		34
+#define IRQ_U300_GPIO_PORT0		33
+#define IRQ_U300_GPIO_PORT1		34
+#define IRQ_U300_GPIO_PORT2		35
 
 #if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) || \
     defined(CONFIG_MACH_U300_BS335)
 /* These are for DB3150, DB3200 and DB3350 */
-#define IRQ_U300_WDOG			35
-#define IRQ_U300_EVHIST			36
-#define IRQ_U300_MSPRO			37
-#define IRQ_U300_MMCSD_MCIINTR0		38
-#define IRQ_U300_MMCSD_MCIINTR1		39
-#define IRQ_U300_I2C0			40
-#define IRQ_U300_I2C1			41
-#define IRQ_U300_RTC			42
-#define IRQ_U300_NFIF			43
-#define IRQ_U300_NFIF2			44
+#define IRQ_U300_WDOG			36
+#define IRQ_U300_EVHIST			37
+#define IRQ_U300_MSPRO			38
+#define IRQ_U300_MMCSD_MCIINTR0		39
+#define IRQ_U300_MMCSD_MCIINTR1		40
+#define IRQ_U300_I2C0			41
+#define IRQ_U300_I2C1			42
+#define IRQ_U300_RTC			43
+#define IRQ_U300_NFIF			44
+#define IRQ_U300_NFIF2			45
 #endif
 
 /* DB3150 and DB3200 have only 45 IRQs */
 #if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
-#define U300_VIC_IRQS_END		45
+#define U300_VIC_IRQS_END		46
 #endif
 
 /* The DB3350-specific interrupt lines */
 #ifdef CONFIG_MACH_U300_BS335
-#define IRQ_U300_ISP_F0			45
-#define IRQ_U300_ISP_F1			46
-#define IRQ_U300_ISP_F2			47
-#define IRQ_U300_ISP_F3			48
-#define IRQ_U300_ISP_F4			49
-#define IRQ_U300_GPIO_PORT3		50
-#define IRQ_U300_SYSCON_PLL_LOCK	51
-#define IRQ_U300_UART1			52
-#define IRQ_U300_GPIO_PORT4		53
-#define IRQ_U300_GPIO_PORT5		54
-#define IRQ_U300_GPIO_PORT6		55
-#define U300_VIC_IRQS_END		56
+#define IRQ_U300_ISP_F0			46
+#define IRQ_U300_ISP_F1			47
+#define IRQ_U300_ISP_F2			48
+#define IRQ_U300_ISP_F3			49
+#define IRQ_U300_ISP_F4			50
+#define IRQ_U300_GPIO_PORT3		51
+#define IRQ_U300_SYSCON_PLL_LOCK	52
+#define IRQ_U300_UART1			53
+#define IRQ_U300_GPIO_PORT4		54
+#define IRQ_U300_GPIO_PORT5		55
+#define IRQ_U300_GPIO_PORT6		56
+#define U300_VIC_IRQS_END		57
 #endif
 
 /* The DB3210-specific interrupt lines */
 #ifdef CONFIG_MACH_U300_BS365
-#define IRQ_U300_GPIO_PORT3		35
-#define IRQ_U300_GPIO_PORT4		36
-#define IRQ_U300_WDOG			37
-#define IRQ_U300_EVHIST			38
-#define IRQ_U300_MSPRO			39
-#define IRQ_U300_MMCSD_MCIINTR0		40
-#define IRQ_U300_MMCSD_MCIINTR1		41
-#define IRQ_U300_I2C0			42
-#define IRQ_U300_I2C1			43
-#define IRQ_U300_RTC			44
-#define IRQ_U300_NFIF			45
-#define IRQ_U300_NFIF2			46
-#define IRQ_U300_SYSCON_PLL_LOCK	47
-#define U300_VIC_IRQS_END		48
+#define IRQ_U300_GPIO_PORT3		36
+#define IRQ_U300_GPIO_PORT4		37
+#define IRQ_U300_WDOG			38
+#define IRQ_U300_EVHIST			39
+#define IRQ_U300_MSPRO			40
+#define IRQ_U300_MMCSD_MCIINTR0		41
+#define IRQ_U300_MMCSD_MCIINTR1		42
+#define IRQ_U300_I2C0			43
+#define IRQ_U300_I2C1			44
+#define IRQ_U300_RTC			45
+#define IRQ_U300_NFIF			46
+#define IRQ_U300_NFIF2			47
+#define IRQ_U300_SYSCON_PLL_LOCK	48
+#define U300_VIC_IRQS_END		49
 #endif
 
 /* Maximum 8*7 GPIO lines */
@@ -117,6 +117,6 @@
 #define IRQ_U300_GPIO_END		(U300_VIC_IRQS_END)
 #endif
 
-#define NR_IRQS				(IRQ_U300_GPIO_END)
+#define NR_IRQS				(IRQ_U300_GPIO_END - IRQ_U300_INTCON0_START)
 
 #endif
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 880d02ec89d4..53d3d46dec12 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -9,16 +9,16 @@ config UX500_SOC_COMMON
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_764369
 	select CACHE_L2X0
-
-config UX500_SOC_DB5500
-	bool
-	select MFD_DB5500_PRCMU
+	select PINCTRL
+	select PINCTRL_NOMADIK
 
 config UX500_SOC_DB8500
 	bool
 	select MFD_DB8500_PRCMU
+	select REGULATOR
 	select REGULATOR_DB8500_PRCMU
 	select CPU_FREQ_TABLE if CPU_FREQ
+	select PINCTRL_DB8500
 
 menu "Ux500 target platform (boards)"
 
@@ -44,15 +44,8 @@ config MACH_SNOWBALL
 	help
 	  Include support for the snowball development platform.
 
-config MACH_U5500
-	bool "U5500 Development platform"
-	select UX500_SOC_DB5500
-	help
-	  Include support for the U5500 development platform.
-
 config UX500_AUTO_PLATFORM
 	def_bool y
-	depends on !MACH_U5500
 	select MACH_MOP500
 	help
 	  At least one platform needs to be selected in order to build
@@ -73,18 +66,4 @@ config UX500_DEBUG_UART
 	  Choose the UART on which kernel low-level debug messages should be
 	  output.
 
-config U5500_MODEM_IRQ
-	bool "Modem IRQ support"
-	depends on UX500_SOC_DB5500
-	default y
-	help
-	  Add support for handling IRQ:s from modem side
-
-config U5500_MBOX
-	bool "Mailbox support"
-	depends on U5500_MODEM_IRQ
-	default y
-	help
-	  Add support for U5500 mailbox communication with modem side
-
 endif
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index 465b9ec9510a..026086ff9e6c 100644
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -4,17 +4,14 @@
 
 obj-y				:= clock.o cpu.o devices.o devices-common.o \
 				   id.o usb.o timer.o
+obj-$(CONFIG_CPU_IDLE)          += cpuidle.o
 obj-$(CONFIG_CACHE_L2X0)	+= cache-l2x0.o
-obj-$(CONFIG_UX500_SOC_DB5500)	+= cpu-db5500.o dma-db5500.o
 obj-$(CONFIG_UX500_SOC_DB8500)	+= cpu-db8500.o devices-db8500.o
 obj-$(CONFIG_MACH_MOP500)	+= board-mop500.o board-mop500-sdi.o \
 				board-mop500-regulators.o \
 				board-mop500-uib.o board-mop500-stuib.o \
 				board-mop500-u8500uib.o \
-				board-mop500-pins.o
-obj-$(CONFIG_MACH_U5500)	+= board-u5500.o board-u5500-sdi.o
+				board-mop500-pins.o \
+				board-mop500-msp.o
 obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
-obj-$(CONFIG_U5500_MODEM_IRQ)	+= modem-irq-db5500.o
-obj-$(CONFIG_U5500_MBOX)	+= mbox-db5500.o
-
diff --git a/arch/arm/mach-ux500/board-mop500-msp.c b/arch/arm/mach-ux500/board-mop500-msp.c
new file mode 100644
index 000000000000..996048038743
--- /dev/null
+++ b/arch/arm/mach-ux500/board-mop500-msp.c
@@ -0,0 +1,267 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/pinctrl/consumer.h>
+
+#include <plat/gpio-nomadik.h>
+#include <plat/pincfg.h>
+#include <plat/ste_dma40.h>
+
+#include <mach/devices.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/msp.h>
+
+#include "ste-dma40-db8500.h"
+#include "board-mop500.h"
+#include "devices-db8500.h"
+#include "pins-db8500.h"
+
+/* MSP1/3 Tx/Rx usage protection */
+static DEFINE_SPINLOCK(msp_rxtx_lock);
+
+/* Reference Count */
+static int msp_rxtx_ref;
+
+/* Pin modes */
+struct pinctrl *msp1_p;
+struct pinctrl_state *msp1_def;
+struct pinctrl_state *msp1_sleep;
+
+int msp13_i2s_init(void)
+{
+	int retval = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&msp_rxtx_lock, flags);
+	if (msp_rxtx_ref == 0 && !(IS_ERR(msp1_p) || IS_ERR(msp1_def))) {
+		retval = pinctrl_select_state(msp1_p, msp1_def);
+		if (retval)
+			pr_err("could not set MSP1 defstate\n");
+	}
+	if (!retval)
+		msp_rxtx_ref++;
+	spin_unlock_irqrestore(&msp_rxtx_lock, flags);
+
+	return retval;
+}
+
+int msp13_i2s_exit(void)
+{
+	int retval = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&msp_rxtx_lock, flags);
+	WARN_ON(!msp_rxtx_ref);
+	msp_rxtx_ref--;
+	if (msp_rxtx_ref == 0 && !(IS_ERR(msp1_p) || IS_ERR(msp1_sleep))) {
+		retval = pinctrl_select_state(msp1_p, msp1_sleep);
+		if (retval)
+			pr_err("could not set MSP1 sleepstate\n");
+	}
+	spin_unlock_irqrestore(&msp_rxtx_lock, flags);
+
+	return retval;
+}
+
+static struct stedma40_chan_cfg msp0_dma_rx = {
+	.high_priority = true,
+	.dir = STEDMA40_PERIPH_TO_MEM,
+
+	.src_dev_type = DB8500_DMA_DEV31_MSP0_RX_SLIM0_CH0_RX,
+	.dst_dev_type = STEDMA40_DEV_DST_MEMORY,
+
+	.src_info.psize = STEDMA40_PSIZE_LOG_4,
+	.dst_info.psize = STEDMA40_PSIZE_LOG_4,
+
+	/* data_width is set during configuration */
+};
+
+static struct stedma40_chan_cfg msp0_dma_tx = {
+	.high_priority = true,
+	.dir = STEDMA40_MEM_TO_PERIPH,
+
+	.src_dev_type = STEDMA40_DEV_DST_MEMORY,
+	.dst_dev_type = DB8500_DMA_DEV31_MSP0_TX_SLIM0_CH0_TX,
+
+	.src_info.psize = STEDMA40_PSIZE_LOG_4,
+	.dst_info.psize = STEDMA40_PSIZE_LOG_4,
+
+	/* data_width is set during configuration */
+};
+
+static struct msp_i2s_platform_data msp0_platform_data = {
+	.id = MSP_I2S_0,
+	.msp_i2s_dma_rx = &msp0_dma_rx,
+	.msp_i2s_dma_tx = &msp0_dma_tx,
+};
+
+static struct stedma40_chan_cfg msp1_dma_rx = {
+	.high_priority = true,
+	.dir = STEDMA40_PERIPH_TO_MEM,
+
+	.src_dev_type = DB8500_DMA_DEV30_MSP3_RX,
+	.dst_dev_type = STEDMA40_DEV_DST_MEMORY,
+
+	.src_info.psize = STEDMA40_PSIZE_LOG_4,
+	.dst_info.psize = STEDMA40_PSIZE_LOG_4,
+
+	/* data_width is set during configuration */
+};
+
+static struct stedma40_chan_cfg msp1_dma_tx = {
+	.high_priority = true,
+	.dir = STEDMA40_MEM_TO_PERIPH,
+
+	.src_dev_type = STEDMA40_DEV_DST_MEMORY,
+	.dst_dev_type = DB8500_DMA_DEV30_MSP1_TX,
+
+	.src_info.psize = STEDMA40_PSIZE_LOG_4,
+	.dst_info.psize = STEDMA40_PSIZE_LOG_4,
+
+	/* data_width is set during configuration */
+};
+
+static struct msp_i2s_platform_data msp1_platform_data = {
+	.id = MSP_I2S_1,
+	.msp_i2s_dma_rx = NULL,
+	.msp_i2s_dma_tx = &msp1_dma_tx,
+	.msp_i2s_init = msp13_i2s_init,
+	.msp_i2s_exit = msp13_i2s_exit,
+};
+
+static struct stedma40_chan_cfg msp2_dma_rx = {
+	.high_priority = true,
+	.dir = STEDMA40_PERIPH_TO_MEM,
+
+	.src_dev_type = DB8500_DMA_DEV14_MSP2_RX,
+	.dst_dev_type = STEDMA40_DEV_DST_MEMORY,
+
+	/* MSP2 DMA doesn't work with PSIZE == 4 on DB8500v2 */
+	.src_info.psize = STEDMA40_PSIZE_LOG_1,
+	.dst_info.psize = STEDMA40_PSIZE_LOG_1,
+
+	/* data_width is set during configuration */
+};
+
+static struct stedma40_chan_cfg msp2_dma_tx = {
+	.high_priority = true,
+	.dir = STEDMA40_MEM_TO_PERIPH,
+
+	.src_dev_type = STEDMA40_DEV_DST_MEMORY,
+	.dst_dev_type = DB8500_DMA_DEV14_MSP2_TX,
+
+	.src_info.psize = STEDMA40_PSIZE_LOG_4,
+	.dst_info.psize = STEDMA40_PSIZE_LOG_4,
+
+	.use_fixed_channel = true,
+	.phy_channel = 1,
+
+	/* data_width is set during configuration */
+};
+
+static struct platform_device *db8500_add_msp_i2s(struct device *parent,
+			int id,
+			resource_size_t base, int irq,
+			struct msp_i2s_platform_data *pdata)
+{
+	struct platform_device *pdev;
+	struct resource res[] = {
+		DEFINE_RES_MEM(base, SZ_4K),
+		DEFINE_RES_IRQ(irq),
+	};
+
+	pr_info("Register platform-device 'ux500-msp-i2s', id %d, irq %d\n",
+		id, irq);
+	pdev = platform_device_register_resndata(parent, "ux500-msp-i2s", id,
+						res, ARRAY_SIZE(res),
+						pdata, sizeof(*pdata));
+	if (!pdev) {
+		pr_err("Failed to register platform-device 'ux500-msp-i2s.%d'!\n",
+			id);
+		return NULL;
+	}
+
+	return pdev;
+}
+
+/* Platform device for ASoC U8500 machine */
+static struct platform_device snd_soc_u8500 = {
+		.name = "snd-soc-u8500",
+		.id = 0,
+		.dev = {
+			.platform_data = NULL,
+		},
+};
+
+/* Platform device for Ux500-PCM */
+static struct platform_device ux500_pcm = {
+		.name = "ux500-pcm",
+		.id = 0,
+		.dev = {
+			.platform_data = NULL,
+		},
+};
+
+static struct msp_i2s_platform_data msp2_platform_data = {
+	.id = MSP_I2S_2,
+	.msp_i2s_dma_rx = &msp2_dma_rx,
+	.msp_i2s_dma_tx = &msp2_dma_tx,
+};
+
+static struct msp_i2s_platform_data msp3_platform_data = {
+	.id		= MSP_I2S_3,
+	.msp_i2s_dma_rx	= &msp1_dma_rx,
+	.msp_i2s_dma_tx	= NULL,
+	.msp_i2s_init = msp13_i2s_init,
+	.msp_i2s_exit = msp13_i2s_exit,
+};
+
+int mop500_msp_init(struct device *parent)
+{
+	struct platform_device *msp1;
+
+	pr_info("%s: Register platform-device 'snd-soc-u8500'.\n", __func__);
+	platform_device_register(&snd_soc_u8500);
+
+	pr_info("Initialize MSP I2S-devices.\n");
+	db8500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0,
+			   &msp0_platform_data);
+	msp1 = db8500_add_msp_i2s(parent, 1, U8500_MSP1_BASE, IRQ_DB8500_MSP1,
+			   &msp1_platform_data);
+	db8500_add_msp_i2s(parent, 2, U8500_MSP2_BASE, IRQ_DB8500_MSP2,
+			   &msp2_platform_data);
+	db8500_add_msp_i2s(parent, 3, U8500_MSP3_BASE, IRQ_DB8500_MSP1,
+			   &msp3_platform_data);
+
+	/* Get the pinctrl handle for MSP1 */
+	if (msp1) {
+		msp1_p = pinctrl_get(&msp1->dev);
+		if (IS_ERR(msp1_p))
+			dev_err(&msp1->dev, "could not get MSP1 pinctrl\n");
+		else {
+			msp1_def = pinctrl_lookup_state(msp1_p,
+							PINCTRL_STATE_DEFAULT);
+			if (IS_ERR(msp1_def)) {
+				dev_err(&msp1->dev,
+					"could not get MSP1 defstate\n");
+			}
+			msp1_sleep = pinctrl_lookup_state(msp1_p,
+							  PINCTRL_STATE_SLEEP);
+			if (IS_ERR(msp1_sleep))
+				dev_err(&msp1->dev,
+					"could not get MSP1 idlestate\n");
+		}
+	}
+
+	pr_info("%s: Register platform-device 'ux500-pcm'\n", __func__);
+	platform_device_register(&ux500_pcm);
+
+	return 0;
+}
diff --git a/arch/arm/mach-ux500/board-mop500-msp.h b/arch/arm/mach-ux500/board-mop500-msp.h
new file mode 100644
index 000000000000..6fcfb5e2cc94
--- /dev/null
+++ b/arch/arm/mach-ux500/board-mop500-msp.h
@@ -0,0 +1,14 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2012
+ *
+ * Author: Ola Lilja <ola.o.lilja@stericsson.com>,
+ *         for ST-Ericsson.
+ *
+ * License terms:
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+void mop500_msp_init(struct device *parent);
diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c
index f5413dca532c..32fd99204464 100644
--- a/arch/arm/mach-ux500/board-mop500-pins.c
+++ b/arch/arm/mach-ux500/board-mop500-pins.c
@@ -7,299 +7,508 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/bug.h>
+#include <linux/string.h>
+#include <linux/pinctrl/machine.h>
 
 #include <asm/mach-types.h>
 #include <plat/pincfg.h>
 #include <plat/gpio-nomadik.h>
+
 #include <mach/hardware.h>
 
 #include "pins-db8500.h"
+#include "board-mop500.h"
 
-static pin_cfg_t mop500_pins_common[] = {
-	/* I2C */
-	GPIO147_I2C0_SCL,
-	GPIO148_I2C0_SDA,
-	GPIO16_I2C1_SCL,
-	GPIO17_I2C1_SDA,
-	GPIO10_I2C2_SDA,
-	GPIO11_I2C2_SCL,
-	GPIO229_I2C3_SDA,
-	GPIO230_I2C3_SCL,
-
-	/* MSP0 */
-	GPIO12_MSP0_TXD,
-	GPIO13_MSP0_TFS,
-	GPIO14_MSP0_TCK,
-	GPIO15_MSP0_RXD,
-
-	/* MSP2: HDMI */
-	GPIO193_MSP2_TXD,
-	GPIO194_MSP2_TCK,
-	GPIO195_MSP2_TFS,
-	GPIO196_MSP2_RXD | PIN_OUTPUT_LOW,
-
-	/* Touch screen INTERFACE */
-	GPIO84_GPIO	| PIN_INPUT_PULLUP, /* TOUCH_INT1 */
-
-	/* STMPE1601/tc35893 keypad  IRQ */
-	GPIO218_GPIO	| PIN_INPUT_PULLUP,
-
-	/* MMC0 (MicroSD card) */
-	GPIO18_MC0_CMDDIR	| PIN_OUTPUT_HIGH,
-	GPIO19_MC0_DAT0DIR	| PIN_OUTPUT_HIGH,
-	GPIO20_MC0_DAT2DIR	| PIN_OUTPUT_HIGH,
-
-	GPIO22_MC0_FBCLK	| PIN_INPUT_NOPULL,
-	GPIO23_MC0_CLK		| PIN_OUTPUT_LOW,
-	GPIO24_MC0_CMD		| PIN_INPUT_PULLUP,
-	GPIO25_MC0_DAT0		| PIN_INPUT_PULLUP,
-	GPIO26_MC0_DAT1		| PIN_INPUT_PULLUP,
-	GPIO27_MC0_DAT2		| PIN_INPUT_PULLUP,
-	GPIO28_MC0_DAT3		| PIN_INPUT_PULLUP,
-
-	/* SDI1 (SDIO) */
-	GPIO208_MC1_CLK		| PIN_OUTPUT_LOW,
-	GPIO209_MC1_FBCLK	| PIN_INPUT_NOPULL,
-	GPIO210_MC1_CMD		| PIN_INPUT_PULLUP,
-	GPIO211_MC1_DAT0	| PIN_INPUT_PULLUP,
-	GPIO212_MC1_DAT1	| PIN_INPUT_PULLUP,
-	GPIO213_MC1_DAT2	| PIN_INPUT_PULLUP,
-	GPIO214_MC1_DAT3	| PIN_INPUT_PULLUP,
-
-	/* MMC2 (On-board DATA INTERFACE eMMC) */
-	GPIO128_MC2_CLK		| PIN_OUTPUT_LOW,
-	GPIO129_MC2_CMD		| PIN_INPUT_PULLUP,
-	GPIO130_MC2_FBCLK	| PIN_INPUT_NOPULL,
-	GPIO131_MC2_DAT0	| PIN_INPUT_PULLUP,
-	GPIO132_MC2_DAT1	| PIN_INPUT_PULLUP,
-	GPIO133_MC2_DAT2	| PIN_INPUT_PULLUP,
-	GPIO134_MC2_DAT3	| PIN_INPUT_PULLUP,
-	GPIO135_MC2_DAT4	| PIN_INPUT_PULLUP,
-	GPIO136_MC2_DAT5	| PIN_INPUT_PULLUP,
-	GPIO137_MC2_DAT6	| PIN_INPUT_PULLUP,
-	GPIO138_MC2_DAT7	| PIN_INPUT_PULLUP,
-
-	/* MMC4 (On-board STORAGE INTERFACE eMMC) */
-	GPIO197_MC4_DAT3	| PIN_INPUT_PULLUP,
-	GPIO198_MC4_DAT2	| PIN_INPUT_PULLUP,
-	GPIO199_MC4_DAT1	| PIN_INPUT_PULLUP,
-	GPIO200_MC4_DAT0	| PIN_INPUT_PULLUP,
-	GPIO201_MC4_CMD		| PIN_INPUT_PULLUP,
-	GPIO202_MC4_FBCLK	| PIN_INPUT_NOPULL,
-	GPIO203_MC4_CLK		| PIN_OUTPUT_LOW,
-	GPIO204_MC4_DAT7	| PIN_INPUT_PULLUP,
-	GPIO205_MC4_DAT6	| PIN_INPUT_PULLUP,
-	GPIO206_MC4_DAT5	| PIN_INPUT_PULLUP,
-	GPIO207_MC4_DAT4	| PIN_INPUT_PULLUP,
-
-	/* SKE keypad */
-	GPIO153_KP_I7,
-	GPIO154_KP_I6,
-	GPIO155_KP_I5,
-	GPIO156_KP_I4,
-	GPIO157_KP_O7,
-	GPIO158_KP_O6,
-	GPIO159_KP_O5,
-	GPIO160_KP_O4,
-	GPIO161_KP_I3,
-	GPIO162_KP_I2,
-	GPIO163_KP_I1,
-	GPIO164_KP_I0,
-	GPIO165_KP_O3,
-	GPIO166_KP_O2,
-	GPIO167_KP_O1,
-	GPIO168_KP_O0,
+enum custom_pin_cfg_t {
+	PINS_FOR_DEFAULT,
+	PINS_FOR_U9500,
+};
 
-	/* UART */
-	/* uart-0 pins gpio configuration should be
-	 * kept intact to prevent glitch in tx line
-	 * when tty dev is opened. Later these pins
+static enum custom_pin_cfg_t pinsfor;
+
+/* These simply sets bias for pins */
+#define BIAS(a,b) static unsigned long a[] = { b }
+
+BIAS(pd, PIN_PULL_DOWN);
+BIAS(slpm_gpio_nopull, PIN_SLPM_GPIO|PIN_SLPM_INPUT_NOPULL);
+BIAS(in_nopull, PIN_INPUT_NOPULL);
+BIAS(in_nopull_sleep_nowkup, PIN_INPUT_NOPULL|PIN_SLPM_WAKEUP_DISABLE);
+BIAS(in_pu, PIN_INPUT_PULLUP);
+BIAS(in_pd, PIN_INPUT_PULLDOWN);
+BIAS(in_pd_slpm_in_pu, PIN_INPUT_PULLDOWN|PIN_SLPM_INPUT_PULLUP);
+BIAS(in_pu_slpm_out_lo, PIN_INPUT_PULLUP|PIN_SLPM_OUTPUT_LOW);
+BIAS(out_hi, PIN_OUTPUT_HIGH);
+BIAS(out_lo, PIN_OUTPUT_LOW);
+BIAS(out_lo_sleep_nowkup, PIN_OUTPUT_LOW|PIN_SLPM_WAKEUP_DISABLE);
+/* These also force them into GPIO mode */
+BIAS(gpio_in_pu, PIN_INPUT_PULLUP|PIN_GPIOMODE_ENABLED);
+BIAS(gpio_in_pd, PIN_INPUT_PULLDOWN|PIN_GPIOMODE_ENABLED);
+BIAS(gpio_in_pu_slpm_gpio_nopull, PIN_INPUT_PULLUP|PIN_GPIOMODE_ENABLED|PIN_SLPM_GPIO|PIN_SLPM_INPUT_NOPULL);
+BIAS(gpio_in_pd_slpm_gpio_nopull, PIN_INPUT_PULLDOWN|PIN_GPIOMODE_ENABLED|PIN_SLPM_GPIO|PIN_SLPM_INPUT_NOPULL);
+BIAS(gpio_out_hi, PIN_OUTPUT_HIGH|PIN_GPIOMODE_ENABLED);
+BIAS(gpio_out_lo, PIN_OUTPUT_LOW|PIN_GPIOMODE_ENABLED);
+/* Sleep modes */
+BIAS(sleep_in_wkup_pdis, PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
+BIAS(sleep_in_nopull_wkup, PIN_INPUT_NOPULL|PIN_SLPM_WAKEUP_ENABLE);
+BIAS(sleep_out_hi_wkup_pdis, PIN_SLPM_OUTPUT_HIGH|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
+BIAS(sleep_out_lo_wkup, PIN_OUTPUT_LOW|PIN_SLPM_WAKEUP_ENABLE);
+BIAS(sleep_out_wkup_pdis, PIN_SLPM_DIR_OUTPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
+
+/* We use these to define hog settings that are always done on boot */
+#define DB8500_MUX_HOG(group,func) \
+	PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-db8500", group, func)
+#define DB8500_PIN_HOG(pin,conf) \
+	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-db8500", pin, conf)
+
+/* These are default states associated with device and changed runtime */
+#define DB8500_MUX(group,func,dev) \
+	PIN_MAP_MUX_GROUP_DEFAULT(dev, "pinctrl-db8500", group, func)
+#define DB8500_PIN(pin,conf,dev) \
+	PIN_MAP_CONFIGS_PIN_DEFAULT(dev, "pinctrl-db8500", pin, conf)
+
+#define DB8500_PIN_SLEEP(pin,conf,dev) \
+	PIN_MAP_CONFIGS_PIN(dev, PINCTRL_STATE_SLEEP, "pinctrl-db8500",	\
+			    pin, conf)
+
+/* Pin control settings */
+static struct pinctrl_map __initdata mop500_family_pinmap[] = {
+	/*
+	 * uMSP0, mux in 4 pins, regular placement of RX/TX
+	 * explicitly set the pins to no pull
+	 */
+	DB8500_MUX_HOG("msp0txrx_a_1", "msp0"),
+	DB8500_MUX_HOG("msp0tfstck_a_1", "msp0"),
+	DB8500_PIN_HOG("GPIO12_AC4", in_nopull), /* TXD */
+	DB8500_PIN_HOG("GPIO15_AC3", in_nopull), /* RXD */
+	DB8500_PIN_HOG("GPIO13_AF3", in_nopull), /* TFS */
+	DB8500_PIN_HOG("GPIO14_AE3", in_nopull), /* TCK */
+	/* MSP2 for HDMI, pull down TXD, TCK, TFS  */
+	DB8500_MUX_HOG("msp2_a_1", "msp2"),
+	DB8500_PIN_HOG("GPIO193_AH27", in_pd), /* TXD */
+	DB8500_PIN_HOG("GPIO194_AF27", in_pd), /* TCK */
+	DB8500_PIN_HOG("GPIO195_AG28", in_pd), /* TFS */
+	DB8500_PIN_HOG("GPIO196_AG26", out_lo), /* RXD */
+	/*
+	 * LCD, set TE0 (using LCD VSI0) and D14 (touch screen interrupt) to
+	 * pull-up
+	 * TODO: is this really correct? Snowball doesn't have a LCD.
+	 */
+	DB8500_MUX_HOG("lcdvsi0_a_1", "lcd"),
+	DB8500_PIN_HOG("GPIO68_E1", in_pu),
+	DB8500_PIN_HOG("GPIO84_C2", gpio_in_pu),
+	/*
+	 * STMPE1601/tc35893 keypad IRQ GPIO 218
+	 * TODO: set for snowball and HREF really??
+	 */
+	DB8500_PIN_HOG("GPIO218_AH11", gpio_in_pu),
+	/*
+	 * UART0, we do not mux in u0 here.
+	 * uart-0 pins gpio configuration should be kept intact to prevent
+	 * a glitch in tx line when the tty dev is opened. Later these pins
 	 * are configured to uart mop500_pins_uart0
-	 *
-	 * It will be replaced with uart configuration
-	 * once the issue is solved.
 	 */
-	GPIO0_GPIO	| PIN_INPUT_PULLUP,
-	GPIO1_GPIO	| PIN_OUTPUT_HIGH,
-	GPIO2_GPIO	| PIN_INPUT_PULLUP,
-	GPIO3_GPIO	| PIN_OUTPUT_HIGH,
-
-	GPIO29_U2_RXD	| PIN_INPUT_PULLUP,
-	GPIO30_U2_TXD	| PIN_OUTPUT_HIGH,
-	GPIO31_U2_CTSn	| PIN_INPUT_PULLUP,
-	GPIO32_U2_RTSn	| PIN_OUTPUT_HIGH,
-
-	/* Display & HDMI HW sync */
-	GPIO68_LCD_VSI0	| PIN_INPUT_PULLUP,
-	GPIO69_LCD_VSI1	| PIN_INPUT_PULLUP,
+	DB8500_PIN_HOG("GPIO0_AJ5", in_pu), /* CTS */
+	DB8500_PIN_HOG("GPIO1_AJ3", out_hi), /* RTS */
+	DB8500_PIN_HOG("GPIO2_AH4", in_pu), /* RXD */
+	DB8500_PIN_HOG("GPIO3_AH3", out_hi), /* TXD */
+	/*
+	 * Mux in UART2 on altfunction C and set pull-ups.
+	 * TODO: is this used on U8500 variants and Snowball really?
+	 * The setting on GPIO31 conflicts with magnetometer use on hrefv60
+	 */
+	DB8500_MUX_HOG("u2rxtx_c_1", "u2"),
+	DB8500_MUX_HOG("u2ctsrts_c_1", "u2"),
+	DB8500_PIN_HOG("GPIO29_W2", in_pu), /* RXD */
+	DB8500_PIN_HOG("GPIO30_W3", out_hi), /* TXD */
+	DB8500_PIN_HOG("GPIO31_V3", in_pu), /* CTS */
+	DB8500_PIN_HOG("GPIO32_V2", out_hi), /* RTS */
+	/*
+	 * The following pin sets were known as "runtime pins" before being
+	 * converted to the pinctrl model. Here we model them as "default"
+	 * states.
+	 */
+	/* Mux in UART0 after initialization */
+	DB8500_MUX("u0_a_1", "u0", "uart0"),
+	DB8500_PIN("GPIO0_AJ5", in_pu, "uart0"), /* CTS */
+	DB8500_PIN("GPIO1_AJ3", out_hi, "uart0"), /* RTS */
+	DB8500_PIN("GPIO2_AH4", in_pu, "uart0"), /* RXD */
+	DB8500_PIN("GPIO3_AH3", out_hi, "uart0"), /* TXD */
+	/* UART0 sleep state */
+	DB8500_PIN_SLEEP("GPIO0_AJ5", sleep_in_wkup_pdis, "uart0"),
+	DB8500_PIN_SLEEP("GPIO1_AJ3", sleep_out_hi_wkup_pdis, "uart0"),
+	DB8500_PIN_SLEEP("GPIO2_AH4", sleep_in_wkup_pdis, "uart0"),
+	DB8500_PIN_SLEEP("GPIO3_AH3", sleep_out_wkup_pdis, "uart0"),
+	/* MSP1 for ALSA codec */
+	DB8500_MUX("msp1txrx_a_1", "msp1", "ux500-msp-i2s.1"),
+	DB8500_MUX("msp1_a_1", "msp1", "ux500-msp-i2s.1"),
+	DB8500_PIN("GPIO33_AF2", out_lo_sleep_nowkup, "ux500-msp-i2s.1"),
+	DB8500_PIN("GPIO34_AE1", in_nopull_sleep_nowkup, "ux500-msp-i2s.1"),
+	DB8500_PIN("GPIO35_AE2", in_nopull_sleep_nowkup, "ux500-msp-i2s.1"),
+	DB8500_PIN("GPIO36_AG2", in_nopull_sleep_nowkup, "ux500-msp-i2s.1"),
+	/* MSP1 sleep state */
+	DB8500_PIN_SLEEP("GPIO33_AF2", sleep_out_lo_wkup, "ux500-msp-i2s.1"),
+	DB8500_PIN_SLEEP("GPIO34_AE1", sleep_in_nopull_wkup, "ux500-msp-i2s.1"),
+	DB8500_PIN_SLEEP("GPIO35_AE2", sleep_in_nopull_wkup, "ux500-msp-i2s.1"),
+	DB8500_PIN_SLEEP("GPIO36_AG2", sleep_in_nopull_wkup, "ux500-msp-i2s.1"),
+	/* Mux in LCD data lines 8 thru 11 and LCDA CLK for MCDE TVOUT */
+	DB8500_MUX("lcd_d8_d11_a_1", "lcd", "mcde-tvout"),
+	DB8500_MUX("lcdaclk_b_1", "lcda", "mcde-tvout"),
+	/* Mux in LCD VSI1 and pull it up for MCDE HDMI output */
+	DB8500_MUX("lcdvsi1_a_1", "lcd", "av8100-hdmi"),
+	/* Mux in I2C blocks, put pins into GPIO in sleepmode no pull-up */
+	DB8500_MUX("i2c0_a_1", "i2c0", "nmk-i2c.0"),
+	DB8500_PIN("GPIO147_C15", slpm_gpio_nopull, "nmk-i2c.0"),
+	DB8500_PIN("GPIO148_B16", slpm_gpio_nopull, "nmk-i2c.0"),
+	DB8500_MUX("i2c1_b_2", "i2c1", "nmk-i2c.1"),
+	DB8500_PIN("GPIO16_AD3", slpm_gpio_nopull, "nmk-i2c.1"),
+	DB8500_PIN("GPIO17_AD4", slpm_gpio_nopull, "nmk-i2c.1"),
+	DB8500_MUX("i2c2_b_2", "i2c2", "nmk-i2c.2"),
+	DB8500_PIN("GPIO10_AF5", slpm_gpio_nopull, "nmk-i2c.2"),
+	DB8500_PIN("GPIO11_AG4", slpm_gpio_nopull, "nmk-i2c.2"),
+	DB8500_MUX("i2c3_c_2", "i2c3", "nmk-i2c.3"),
+	DB8500_PIN("GPIO229_AG7", slpm_gpio_nopull, "nmk-i2c.3"),
+	DB8500_PIN("GPIO230_AF7", slpm_gpio_nopull, "nmk-i2c.3"),
+	/* Mux in SDI0 (here called MC0) used for removable MMC/SD/SDIO cards */
+	DB8500_MUX("mc0_a_1", "mc0", "sdi0"),
+	DB8500_PIN("GPIO18_AC2", out_hi, "sdi0"), /* CMDDIR */
+	DB8500_PIN("GPIO19_AC1", out_hi, "sdi0"), /* DAT0DIR */
+	DB8500_PIN("GPIO20_AB4", out_hi, "sdi0"), /* DAT2DIR */
+	DB8500_PIN("GPIO22_AA3", in_nopull, "sdi0"), /* FBCLK */
+	DB8500_PIN("GPIO23_AA4", out_lo, "sdi0"), /* CLK */
+	DB8500_PIN("GPIO24_AB2", in_pu, "sdi0"), /* CMD */
+	DB8500_PIN("GPIO25_Y4", in_pu, "sdi0"), /* DAT0 */
+	DB8500_PIN("GPIO26_Y2", in_pu, "sdi0"), /* DAT1 */
+	DB8500_PIN("GPIO27_AA2", in_pu, "sdi0"), /* DAT2 */
+	DB8500_PIN("GPIO28_AA1", in_pu, "sdi0"), /* DAT3 */
+	/* Mux in SDI1 (here called MC1) used for SDIO for CW1200 WLAN */
+	DB8500_MUX("mc1_a_1", "mc1", "sdi1"),
+	DB8500_PIN("GPIO208_AH16", out_lo, "sdi1"), /* CLK */
+	DB8500_PIN("GPIO209_AG15", in_nopull, "sdi1"), /* FBCLK */
+	DB8500_PIN("GPIO210_AJ15", in_pu, "sdi1"), /* CMD */
+	DB8500_PIN("GPIO211_AG14", in_pu, "sdi1"), /* DAT0 */
+	DB8500_PIN("GPIO212_AF13", in_pu, "sdi1"), /* DAT1 */
+	DB8500_PIN("GPIO213_AG13", in_pu, "sdi1"), /* DAT2 */
+	DB8500_PIN("GPIO214_AH15", in_pu, "sdi1"), /* DAT3 */
+	/* Mux in SDI2 (here called MC2) used for for PoP eMMC */
+	DB8500_MUX("mc2_a_1", "mc2", "sdi2"),
+	DB8500_PIN("GPIO128_A5", out_lo, "sdi2"), /* CLK */
+	DB8500_PIN("GPIO129_B4", in_pu, "sdi2"), /* CMD */
+	DB8500_PIN("GPIO130_C8", in_nopull, "sdi2"), /* FBCLK */
+	DB8500_PIN("GPIO131_A12", in_pu, "sdi2"), /* DAT0 */
+	DB8500_PIN("GPIO132_C10", in_pu, "sdi2"), /* DAT1 */
+	DB8500_PIN("GPIO133_B10", in_pu, "sdi2"), /* DAT2 */
+	DB8500_PIN("GPIO134_B9", in_pu, "sdi2"), /* DAT3 */
+	DB8500_PIN("GPIO135_A9", in_pu, "sdi2"), /* DAT4 */
+	DB8500_PIN("GPIO136_C7", in_pu, "sdi2"), /* DAT5 */
+	DB8500_PIN("GPIO137_A7", in_pu, "sdi2"), /* DAT6 */
+	DB8500_PIN("GPIO138_C5", in_pu, "sdi2"), /* DAT7 */
+	/* Mux in SDI4 (here called MC4) used for for PCB-mounted eMMC */
+	DB8500_MUX("mc4_a_1", "mc4", "sdi4"),
+	DB8500_PIN("GPIO197_AH24", in_pu, "sdi4"), /* DAT3 */
+	DB8500_PIN("GPIO198_AG25", in_pu, "sdi4"), /* DAT2 */
+	DB8500_PIN("GPIO199_AH23", in_pu, "sdi4"), /* DAT1 */
+	DB8500_PIN("GPIO200_AH26", in_pu, "sdi4"), /* DAT0 */
+	DB8500_PIN("GPIO201_AF24", in_pu, "sdi4"), /* CMD */
+	DB8500_PIN("GPIO202_AF25", in_nopull, "sdi4"), /* FBCLK */
+	DB8500_PIN("GPIO203_AE23", out_lo, "sdi4"), /* CLK */
+	DB8500_PIN("GPIO204_AF23", in_pu, "sdi4"), /* DAT7 */
+	DB8500_PIN("GPIO205_AG23", in_pu, "sdi4"), /* DAT6 */
+	DB8500_PIN("GPIO206_AG24", in_pu, "sdi4"), /* DAT5 */
+	DB8500_PIN("GPIO207_AJ23", in_pu, "sdi4"), /* DAT4 */
+	/* Mux in USB pins, drive STP high */
+	DB8500_MUX("usb_a_1", "usb", "musb-ux500.0"),
+	DB8500_PIN("GPIO257_AE29", out_hi, "musb-ux500.0"), /* STP */
+	/* Mux in SPI2 pins on the "other C1" altfunction */
+	DB8500_MUX("spi2_oc1_1", "spi2", "spi2"),
+	DB8500_PIN("GPIO216_AG12", gpio_out_hi, "spi2"), /* FRM */
+	DB8500_PIN("GPIO218_AH11", in_pd, "spi2"), /* RXD */
+	DB8500_PIN("GPIO215_AH13", out_lo, "spi2"), /* TXD */
+	DB8500_PIN("GPIO217_AH12", out_lo, "spi2"), /* CLK */
 };
 
-static pin_cfg_t mop500_pins_default[] = {
-	/* SSP0 */
-	GPIO143_SSP0_CLK,
-	GPIO144_SSP0_FRM,
-	GPIO145_SSP0_RXD | PIN_PULL_DOWN,
-	GPIO146_SSP0_TXD,
-
-
-	GPIO217_GPIO	| PIN_INPUT_PULLUP, /* TC35892 IRQ */
-
-	/* SDI0 (MicroSD card) */
-	GPIO21_MC0_DAT31DIR	| PIN_OUTPUT_HIGH,
-
-	/* UART */
-	GPIO4_U1_RXD	| PIN_INPUT_PULLUP,
-	GPIO5_U1_TXD	| PIN_OUTPUT_HIGH,
-	GPIO6_U1_CTSn	| PIN_INPUT_PULLUP,
-	GPIO7_U1_RTSn	| PIN_OUTPUT_HIGH,
+/*
+ * These are specifically for the MOP500 and HREFP (pre-v60) version of the
+ * board, which utilized a TC35892 GPIO expander instead of using a lot of
+ * on-chip pins as the HREFv60 and later does.
+ */
+static struct pinctrl_map __initdata mop500_pinmap[] = {
+	/* Mux in SSP0, pull down RXD pin */
+	DB8500_MUX_HOG("ssp0_a_1", "ssp0"),
+	DB8500_PIN_HOG("GPIO145_C13", pd),
+	/*
+	 * XENON Flashgun on image processor GPIO (controlled from image
+	 * processor firmware), mux in these image processor GPIO lines 0
+	 * (XENON_FLASH_ID) and 1 (XENON_READY) on altfunction C and pull up
+	 * the pins.
+	 */
+	DB8500_MUX_HOG("ipgpio0_c_1", "ipgpio"),
+	DB8500_MUX_HOG("ipgpio1_c_1", "ipgpio"),
+	DB8500_PIN_HOG("GPIO6_AF6", in_pu),
+	DB8500_PIN_HOG("GPIO7_AG5", in_pu),
+	/* TC35892 IRQ, pull up the line, let the driver mux in the pin */
+	DB8500_PIN_HOG("GPIO217_AH12", gpio_in_pu),
+	/* Mux in UART1 and set the pull-ups */
+	DB8500_MUX_HOG("u1rxtx_a_1", "u1"),
+	DB8500_MUX_HOG("u1ctsrts_a_1", "u1"),
+	DB8500_PIN_HOG("GPIO4_AH6", in_pu), /* RXD */
+	DB8500_PIN_HOG("GPIO5_AG6", out_hi), /* TXD */
+	DB8500_PIN_HOG("GPIO6_AF6", in_pu), /* CTS */
+	DB8500_PIN_HOG("GPIO7_AG5", out_hi), /* RTS */
+	/*
+	 * Runtime stuff: make it possible to mux in the SKE keypad
+	 * and bias the pins
+	 */
+	DB8500_MUX("kp_a_2", "kp", "ske"),
+	DB8500_PIN("GPIO153_B17", in_pd_slpm_in_pu, "ske"), /* I7 */
+	DB8500_PIN("GPIO154_C16", in_pd_slpm_in_pu, "ske"), /* I6 */
+	DB8500_PIN("GPIO155_C19", in_pd_slpm_in_pu, "ske"), /* I5 */
+	DB8500_PIN("GPIO156_C17", in_pd_slpm_in_pu, "ske"), /* I4 */
+	DB8500_PIN("GPIO161_D21", in_pd_slpm_in_pu, "ske"), /* I3 */
+	DB8500_PIN("GPIO162_D20", in_pd_slpm_in_pu, "ske"), /* I2 */
+	DB8500_PIN("GPIO163_C20", in_pd_slpm_in_pu, "ske"), /* I1 */
+	DB8500_PIN("GPIO164_B21", in_pd_slpm_in_pu, "ske"), /* I0 */
+	DB8500_PIN("GPIO157_A18", in_pu_slpm_out_lo, "ske"), /* O7 */
+	DB8500_PIN("GPIO158_C18", in_pu_slpm_out_lo, "ske"), /* O6 */
+	DB8500_PIN("GPIO159_B19", in_pu_slpm_out_lo, "ske"), /* O5 */
+	DB8500_PIN("GPIO160_B20", in_pu_slpm_out_lo, "ske"), /* O4 */
+	DB8500_PIN("GPIO165_C21", in_pu_slpm_out_lo, "ske"), /* O3 */
+	DB8500_PIN("GPIO166_A22", in_pu_slpm_out_lo, "ske"), /* O2 */
+	DB8500_PIN("GPIO167_B24", in_pu_slpm_out_lo, "ske"), /* O1 */
+	DB8500_PIN("GPIO168_C22", in_pu_slpm_out_lo, "ske"), /* O0 */
+	/* Mux in and drive the SDI0 DAT31DIR line high at runtime */
+	DB8500_MUX("mc0dat31dir_a_1", "mc0", "sdi0"),
+	DB8500_PIN("GPIO21_AB3", out_hi, "sdi0"),
 };
 
-static pin_cfg_t hrefv60_pins[] = {
-	/* WLAN */
-	GPIO4_GPIO		| PIN_INPUT_PULLUP,/* WLAN_IRQ */
-	GPIO85_GPIO		| PIN_OUTPUT_LOW,/* WLAN_ENA */
-
-	/* XENON Flashgun INTERFACE */
-	GPIO6_IP_GPIO0	| PIN_INPUT_PULLUP,/* XENON_FLASH_ID */
-	GPIO7_IP_GPIO1	| PIN_INPUT_PULLUP,/* XENON_READY */
-	GPIO170_GPIO	| PIN_OUTPUT_LOW, /* XENON_CHARGE */
-
-	/* Assistant LED INTERFACE */
-	GPIO21_GPIO | PIN_OUTPUT_LOW,  /* XENON_EN1 */
-	GPIO64_IP_GPIO4 | PIN_OUTPUT_LOW,  /* XENON_EN2 */
-
-	/* Magnetometer */
-	GPIO31_GPIO | PIN_INPUT_PULLUP,  /* magnetometer_INT */
-	GPIO32_GPIO | PIN_INPUT_PULLDOWN, /* Magnetometer DRDY */
-
-	/* Display Interface */
-	GPIO65_GPIO		| PIN_OUTPUT_LOW, /* DISP1 RST */
-	GPIO66_GPIO		| PIN_OUTPUT_LOW, /* DISP2 RST */
-
-	/* Touch screen INTERFACE */
-	GPIO143_GPIO	| PIN_OUTPUT_LOW,/*TOUCH_RST1 */
-
-	/* Touch screen INTERFACE 2 */
-	GPIO67_GPIO	| PIN_INPUT_PULLUP, /* TOUCH_INT2 */
-	GPIO146_GPIO	| PIN_OUTPUT_LOW,/*TOUCH_RST2 */
-
-	/* ETM_PTM_TRACE INTERFACE */
-	GPIO70_GPIO	| PIN_OUTPUT_LOW,/* ETM_PTM_DATA23 */
-	GPIO71_GPIO	| PIN_OUTPUT_LOW,/* ETM_PTM_DATA22 */
-	GPIO72_GPIO	| PIN_OUTPUT_LOW,/* ETM_PTM_DATA21 */
-	GPIO73_GPIO	| PIN_OUTPUT_LOW,/* ETM_PTM_DATA20 */
-	GPIO74_GPIO	| PIN_OUTPUT_LOW,/* ETM_PTM_DATA19 */
-
-	/* NAHJ INTERFACE */
-	GPIO76_GPIO	| PIN_OUTPUT_LOW,/* NAHJ_CTRL */
-	GPIO216_GPIO	| PIN_OUTPUT_HIGH,/* NAHJ_CTRL_INV */
-
-	/* NFC INTERFACE */
-	GPIO77_GPIO	| PIN_OUTPUT_LOW, /* NFC_ENA */
-	GPIO144_GPIO	| PIN_INPUT_PULLDOWN, /* NFC_IRQ */
-	GPIO142_GPIO	| PIN_OUTPUT_LOW, /* NFC_RESET */
-
-	/* Keyboard MATRIX INTERFACE */
-	GPIO90_MC5_CMD	| PIN_OUTPUT_LOW, /* KP_O_1 */
-	GPIO87_MC5_DAT1	| PIN_OUTPUT_LOW, /* KP_O_2 */
-	GPIO86_MC5_DAT0	| PIN_OUTPUT_LOW, /* KP_O_3 */
-	GPIO96_KP_O6	| PIN_OUTPUT_LOW, /* KP_O_6 */
-	GPIO94_KP_O7	| PIN_OUTPUT_LOW, /* KP_O_7 */
-	GPIO93_MC5_DAT4	| PIN_INPUT_PULLUP, /* KP_I_0 */
-	GPIO89_MC5_DAT3	| PIN_INPUT_PULLUP, /* KP_I_2 */
-	GPIO88_MC5_DAT2	| PIN_INPUT_PULLUP, /* KP_I_3 */
-	GPIO91_GPIO	| PIN_INPUT_PULLUP, /* FORCE_SENSING_INT */
-	GPIO92_GPIO	| PIN_OUTPUT_LOW, /* FORCE_SENSING_RST */
-	GPIO97_GPIO	| PIN_OUTPUT_LOW, /* FORCE_SENSING_WU */
-
-	/* DiPro Sensor Interface */
-	GPIO139_GPIO	| PIN_INPUT_PULLUP, /* DIPRO_INT */
-
-	/* HAL SWITCH INTERFACE */
-	GPIO145_GPIO	| PIN_INPUT_PULLDOWN,/* HAL_SW */
-
-	/* Audio Amplifier Interface */
-	GPIO149_GPIO	| PIN_OUTPUT_LOW, /* VAUDIO_HF_EN */
-
-	/* GBF INTERFACE */
-	GPIO171_GPIO	| PIN_OUTPUT_LOW, /* GBF_ENA_RESET */
-
-	/* MSP : HDTV INTERFACE */
-	GPIO192_GPIO	| PIN_INPUT_PULLDOWN,
-
-	/* ACCELEROMETER_INTERFACE */
-	GPIO82_GPIO		| PIN_INPUT_PULLUP, /* ACC_INT1 */
-	GPIO83_GPIO		| PIN_INPUT_PULLUP, /* ACC_INT2 */
-
-	/* Proximity Sensor */
-	GPIO217_GPIO		| PIN_INPUT_PULLUP,
-
-
+/*
+ * The HREFv60 series of platforms is using available pins on the DB8500
+ * insteaf of the Toshiba I2C GPIO expander, reusing some pins like the SSP0
+ * and SSP1 ports (previously connected to the AB8500) as generic GPIO lines.
+ */
+static struct pinctrl_map __initdata hrefv60_pinmap[] = {
+	/* Drive WLAN_ENA low */
+	DB8500_PIN_HOG("GPIO85_D5", gpio_out_lo), /* WLAN_ENA */
+	/*
+	 * XENON Flashgun on image processor GPIO (controlled from image
+	 * processor firmware), mux in these image processor GPIO lines 0
+	 * (XENON_FLASH_ID), 1 (XENON_READY) and there is an assistant
+	 * LED on IP GPIO 4 (XENON_EN2) on altfunction C, that need bias
+	 * from GPIO21 so pull up 0, 1 and drive 4 and GPIO21 low as output.
+	 */
+	DB8500_MUX_HOG("ipgpio0_c_1", "ipgpio"),
+	DB8500_MUX_HOG("ipgpio1_c_1", "ipgpio"),
+	DB8500_MUX_HOG("ipgpio4_c_1", "ipgpio"),
+	DB8500_PIN_HOG("GPIO6_AF6", in_pu), /* XENON_FLASH_ID */
+	DB8500_PIN_HOG("GPIO7_AG5", in_pu), /* XENON_READY */
+	DB8500_PIN_HOG("GPIO21_AB3", gpio_out_lo), /* XENON_EN1 */
+	DB8500_PIN_HOG("GPIO64_F3", out_lo), /* XENON_EN2 */
+	/* Magnetometer uses GPIO 31 and 32, pull these up/down respectively */
+	DB8500_PIN_HOG("GPIO31_V3", gpio_in_pu), /* EN1 */
+	DB8500_PIN_HOG("GPIO32_V2", gpio_in_pd), /* DRDY */
+	/*
+	 * Display Interface 1 uses GPIO 65 for RST (reset).
+	 * Display Interface 2 uses GPIO 66 for RST (reset).
+	 * Drive DISP1 reset high (not reset), driver DISP2 reset low (reset)
+	 */
+	DB8500_PIN_HOG("GPIO65_F1", gpio_out_hi), /* DISP1 NO RST */
+	DB8500_PIN_HOG("GPIO66_G3", gpio_out_lo), /* DISP2 RST */
+	/*
+	 * Touch screen uses GPIO 143 for RST1, GPIO 146 for RST2 and
+	 * GPIO 67 for interrupts. Pull-up the IRQ line and drive both
+	 * reset signals low.
+	 */
+	DB8500_PIN_HOG("GPIO143_D12", gpio_out_lo), /* TOUCH_RST1 */
+	DB8500_PIN_HOG("GPIO67_G2", gpio_in_pu), /* TOUCH_INT2 */
+	DB8500_PIN_HOG("GPIO146_D13", gpio_out_lo), /* TOUCH_RST2 */
+	/*
+	 * Drive D19-D23 for the ETM PTM trace interface low,
+	 * (presumably pins are unconnected therefore grounded here,
+	 * the "other alt C1" setting enables these pins)
+	 */
+	DB8500_PIN_HOG("GPIO70_G5", gpio_out_lo),
+	DB8500_PIN_HOG("GPIO71_G4", gpio_out_lo),
+	DB8500_PIN_HOG("GPIO72_H4", gpio_out_lo),
+	DB8500_PIN_HOG("GPIO73_H3", gpio_out_lo),
+	DB8500_PIN_HOG("GPIO74_J3", gpio_out_lo),
+	/* NAHJ CTRL on GPIO 76 to low, CTRL_INV on GPIO216 to high */
+	DB8500_PIN_HOG("GPIO76_J2", gpio_out_lo), /* CTRL */
+	DB8500_PIN_HOG("GPIO216_AG12", gpio_out_hi), /* CTRL_INV */
+	/* NFC ENA and RESET to low, pulldown IRQ line */
+	DB8500_PIN_HOG("GPIO77_H1", gpio_out_lo), /* NFC_ENA */
+	DB8500_PIN_HOG("GPIO144_B13", gpio_in_pd), /* NFC_IRQ */
+	DB8500_PIN_HOG("GPIO142_C11", gpio_out_lo), /* NFC_RESET */
+	/*
+	 * SKE keyboard partly on alt A and partly on "Other alt C1"
+	 * Driver KP_O1,2,3,6,7 low and pull up KP_I 0,2,3 for three
+	 * rows of 6 keys, then pull up force sensing interrup and
+	 * drive reset and force sensing WU low.
+	 */
+	DB8500_MUX_HOG("kp_a_1", "kp"),
+	DB8500_MUX_HOG("kp_oc1_1", "kp"),
+	DB8500_PIN_HOG("GPIO90_A3", out_lo), /* KP_O1 */
+	DB8500_PIN_HOG("GPIO87_B3", out_lo), /* KP_O2 */
+	DB8500_PIN_HOG("GPIO86_C6", out_lo), /* KP_O3 */
+	DB8500_PIN_HOG("GPIO96_D8", out_lo), /* KP_O6 */
+	DB8500_PIN_HOG("GPIO94_D7", out_lo), /* KP_O7 */
+	DB8500_PIN_HOG("GPIO93_B7", in_pu), /* KP_I0 */
+	DB8500_PIN_HOG("GPIO89_E6", in_pu), /* KP_I2 */
+	DB8500_PIN_HOG("GPIO88_C4", in_pu), /* KP_I3 */
+	DB8500_PIN_HOG("GPIO91_B6", gpio_in_pu), /* FORCE_SENSING_INT */
+	DB8500_PIN_HOG("GPIO92_D6", gpio_out_lo), /* FORCE_SENSING_RST */
+	DB8500_PIN_HOG("GPIO97_D9", gpio_out_lo), /* FORCE_SENSING_WU */
+	/* DiPro Sensor interrupt */
+	DB8500_PIN_HOG("GPIO139_C9", gpio_in_pu), /* DIPRO_INT */
+	/* Audio Amplifier HF enable */
+	DB8500_PIN_HOG("GPIO149_B14", gpio_out_hi), /* VAUDIO_HF_EN, enable MAX8968 */
+	/* GBF interface, pull low to reset state */
+	DB8500_PIN_HOG("GPIO171_D23", gpio_out_lo), /* GBF_ENA_RESET */
+	/* MSP : HDTV INTERFACE GPIO line */
+	DB8500_PIN_HOG("GPIO192_AJ27", gpio_in_pd),
+	/* Accelerometer interrupt lines */
+	DB8500_PIN_HOG("GPIO82_C1", gpio_in_pu), /* ACC_INT1 */
+	DB8500_PIN_HOG("GPIO83_D3", gpio_in_pu), /* ACC_INT2 */
+	/* SD card detect GPIO pin */
+	DB8500_PIN_HOG("GPIO95_E8", gpio_in_pu),
+	/*
+	 * Runtime stuff
+	 * Pull up/down of some sensor GPIO pins, for proximity, HAL sensor
+	 * etc.
+	 */
+	DB8500_PIN("GPIO217_AH12", gpio_in_pu_slpm_gpio_nopull, "gpio-keys.0"),
+	DB8500_PIN("GPIO145_C13", gpio_in_pd_slpm_gpio_nopull, "gpio-keys.0"),
+	DB8500_PIN("GPIO139_C9", gpio_in_pu_slpm_gpio_nopull, "gpio-keys.0"),
+	/*
+	 * Make it possible to mux in the SKE keypad and bias the pins
+	 * FIXME: what's the point with this on HREFv60? KP/SKE is already
+	 * muxed in at another place! Enabling this will bork.
+	 */
+	DB8500_MUX("kp_a_2", "kp", "ske"),
+	DB8500_PIN("GPIO153_B17", in_pd_slpm_in_pu, "ske"), /* I7 */
+	DB8500_PIN("GPIO154_C16", in_pd_slpm_in_pu, "ske"), /* I6 */
+	DB8500_PIN("GPIO155_C19", in_pd_slpm_in_pu, "ske"), /* I5 */
+	DB8500_PIN("GPIO156_C17", in_pd_slpm_in_pu, "ske"), /* I4 */
+	DB8500_PIN("GPIO161_D21", in_pd_slpm_in_pu, "ske"), /* I3 */
+	DB8500_PIN("GPIO162_D20", in_pd_slpm_in_pu, "ske"), /* I2 */
+	DB8500_PIN("GPIO163_C20", in_pd_slpm_in_pu, "ske"), /* I1 */
+	DB8500_PIN("GPIO164_B21", in_pd_slpm_in_pu, "ske"), /* I0 */
+	DB8500_PIN("GPIO157_A18", in_pu_slpm_out_lo, "ske"), /* O7 */
+	DB8500_PIN("GPIO158_C18", in_pu_slpm_out_lo, "ske"), /* O6 */
+	DB8500_PIN("GPIO159_B19", in_pu_slpm_out_lo, "ske"), /* O5 */
+	DB8500_PIN("GPIO160_B20", in_pu_slpm_out_lo, "ske"), /* O4 */
+	DB8500_PIN("GPIO165_C21", in_pu_slpm_out_lo, "ske"), /* O3 */
+	DB8500_PIN("GPIO166_A22", in_pu_slpm_out_lo, "ske"), /* O2 */
+	DB8500_PIN("GPIO167_B24", in_pu_slpm_out_lo, "ske"), /* O1 */
+	DB8500_PIN("GPIO168_C22", in_pu_slpm_out_lo, "ske"), /* O0 */
 };
 
-static pin_cfg_t snowball_pins[] = {
-	/* SSP0, to AB8500 */
-	GPIO143_SSP0_CLK,
-	GPIO144_SSP0_FRM,
-	GPIO145_SSP0_RXD	| PIN_PULL_DOWN,
-	GPIO146_SSP0_TXD,
+static struct pinctrl_map __initdata u9500_pinmap[] = {
+	/* Mux in UART1 (just RX/TX) and set the pull-ups */
+	DB8500_MUX_HOG("u1rxtx_a_1", "u1"),
+	DB8500_PIN_HOG("GPIO4_AH6", in_pu),
+	DB8500_PIN_HOG("GPIO5_AG6", out_hi),
+	/* WLAN_IRQ line */
+	DB8500_PIN_HOG("GPIO144_B13", gpio_in_pu),
+	/* HSI */
+	DB8500_MUX_HOG("hsir_a_1", "hsi"),
+	DB8500_MUX_HOG("hsit_a_1", "hsi"),
+	DB8500_PIN_HOG("GPIO219_AG10", in_pd), /* RX FLA0 */
+	DB8500_PIN_HOG("GPIO220_AH10", in_pd), /* RX DAT0 */
+	DB8500_PIN_HOG("GPIO221_AJ11", out_lo), /* RX RDY0 */
+	DB8500_PIN_HOG("GPIO222_AJ9", out_lo), /* TX FLA0 */
+	DB8500_PIN_HOG("GPIO223_AH9", out_lo), /* TX DAT0 */
+	DB8500_PIN_HOG("GPIO224_AG9", in_pd), /* TX RDY0 */
+	DB8500_PIN_HOG("GPIO225_AG8", in_pd), /* CAWAKE0 */
+	DB8500_PIN_HOG("GPIO226_AF8", out_hi), /* ACWAKE0 */
+};
 
-	/* MMC0: MicroSD card */
-	GPIO21_MC0_DAT31DIR     | PIN_OUTPUT_HIGH,
+static struct pinctrl_map __initdata u8500_pinmap[] = {
+	DB8500_PIN_HOG("GPIO226_AF8", gpio_out_lo), /* WLAN_PMU_EN */
+	DB8500_PIN_HOG("GPIO4_AH6", gpio_in_pu), /* WLAN_IRQ */
+};
 
-	/* MMC2: LAN */
-	GPIO86_SM_ADQ0,
-	GPIO87_SM_ADQ1,
-	GPIO88_SM_ADQ2,
-	GPIO89_SM_ADQ3,
-	GPIO90_SM_ADQ4,
-	GPIO91_SM_ADQ5,
-	GPIO92_SM_ADQ6,
-	GPIO93_SM_ADQ7,
+static struct pinctrl_map __initdata snowball_pinmap[] = {
+	/* Mux in SSP0 connected to AB8500, pull down RXD pin */
+	DB8500_MUX_HOG("ssp0_a_1", "ssp0"),
+	DB8500_PIN_HOG("GPIO145_C13", pd),
+	/* Always drive the MC0 DAT31DIR line high on these boards */
+	DB8500_PIN_HOG("GPIO21_AB3", out_hi),
+	/* Mux in "SM" which is used for the SMSC911x Ethernet adapter */
+	DB8500_MUX_HOG("sm_b_1", "sm"),
+	/* Drive RSTn_LAN high */
+	DB8500_PIN_HOG("GPIO141_C12", gpio_out_hi),
+	/*  Accelerometer/Magnetometer */
+	DB8500_PIN_HOG("GPIO163_C20", gpio_in_pu), /* ACCEL_IRQ1 */
+	DB8500_PIN_HOG("GPIO164_B21", gpio_in_pu), /* ACCEL_IRQ2 */
+	DB8500_PIN_HOG("GPIO165_C21", gpio_in_pu), /* MAG_DRDY */
+	/* WLAN/GBF */
+	DB8500_PIN_HOG("GPIO161_D21", gpio_out_lo), /* WLAN_PMU_EN */
+	DB8500_PIN_HOG("GPIO171_D23", gpio_out_hi), /* GBF_ENA */
+	DB8500_PIN_HOG("GPIO215_AH13", gpio_out_lo), /* WLAN_ENA */
+	DB8500_PIN_HOG("GPIO216_AG12", gpio_in_pu), /* WLAN_IRQ */
+};
 
-	GPIO94_SM_ADVn,
-	GPIO95_SM_CS0n,
-	GPIO96_SM_OEn,
-	GPIO97_SM_WEn,
+/*
+ * passing "pinsfor=" in kernel cmdline allows for custom
+ * configuration of GPIOs on u8500 derived boards.
+ */
+static int __init early_pinsfor(char *p)
+{
+	pinsfor = PINS_FOR_DEFAULT;
 
-	GPIO128_SM_CKO,
-	GPIO130_SM_FBCLK,
-	GPIO131_SM_ADQ8,
-	GPIO132_SM_ADQ9,
-	GPIO133_SM_ADQ10,
-	GPIO134_SM_ADQ11,
-	GPIO135_SM_ADQ12,
-	GPIO136_SM_ADQ13,
-	GPIO137_SM_ADQ14,
-	GPIO138_SM_ADQ15,
+	if (strcmp(p, "u9500-21") == 0)
+		pinsfor = PINS_FOR_U9500;
 
-	/* RSTn_LAN */
-	GPIO141_GPIO		| PIN_OUTPUT_HIGH,
-};
+	return 0;
+}
+early_param("pinsfor", early_pinsfor);
 
-void __init mop500_pins_init(void)
+int pins_for_u9500(void)
 {
-	nmk_config_pins(mop500_pins_common,
-			ARRAY_SIZE(mop500_pins_common));
+	if (pinsfor == PINS_FOR_U9500)
+		return 1;
 
-	nmk_config_pins(mop500_pins_default,
-			ARRAY_SIZE(mop500_pins_default));
+	return 0;
 }
 
-void __init snowball_pins_init(void)
+static void __init mop500_href_family_pinmaps_init(void)
 {
-	nmk_config_pins(mop500_pins_common,
-			ARRAY_SIZE(mop500_pins_common));
+	switch (pinsfor) {
+	case PINS_FOR_U9500:
+		pinctrl_register_mappings(u9500_pinmap,
+					  ARRAY_SIZE(u9500_pinmap));
+		break;
+	case PINS_FOR_DEFAULT:
+		pinctrl_register_mappings(u8500_pinmap,
+					  ARRAY_SIZE(u8500_pinmap));
+	default:
+		break;
+	}
+}
 
-	nmk_config_pins(snowball_pins,
-			ARRAY_SIZE(snowball_pins));
+void __init mop500_pinmaps_init(void)
+{
+	pinctrl_register_mappings(mop500_family_pinmap,
+				  ARRAY_SIZE(mop500_family_pinmap));
+	pinctrl_register_mappings(mop500_pinmap,
+				  ARRAY_SIZE(mop500_pinmap));
+	mop500_href_family_pinmaps_init();
 }
 
-void __init hrefv60_pins_init(void)
+void __init snowball_pinmaps_init(void)
 {
-	nmk_config_pins(mop500_pins_common,
-			ARRAY_SIZE(mop500_pins_common));
+	pinctrl_register_mappings(mop500_family_pinmap,
+				  ARRAY_SIZE(mop500_family_pinmap));
+	pinctrl_register_mappings(snowball_pinmap,
+				  ARRAY_SIZE(snowball_pinmap));
+	pinctrl_register_mappings(u8500_pinmap,
+				  ARRAY_SIZE(u8500_pinmap));
+}
 
-	nmk_config_pins(hrefv60_pins,
-			ARRAY_SIZE(hrefv60_pins));
+void __init hrefv60_pinmaps_init(void)
+{
+	pinctrl_register_mappings(mop500_family_pinmap,
+				  ARRAY_SIZE(mop500_family_pinmap));
+	pinctrl_register_mappings(hrefv60_pinmap,
+				  ARRAY_SIZE(hrefv60_pinmap));
+	mop500_href_family_pinmaps_init();
 }
diff --git a/arch/arm/mach-ux500/board-mop500-uib.c b/arch/arm/mach-ux500/board-mop500-uib.c
index 5af36aa56c08..1f47d962e3a1 100644
--- a/arch/arm/mach-ux500/board-mop500-uib.c
+++ b/arch/arm/mach-ux500/board-mop500-uib.c
@@ -96,13 +96,13 @@ static void __init __mop500_uib_init(struct uib *uib, const char *why)
 /*
  * Detect the UIB attached based on the presence or absence of i2c devices.
  */
-static int __init mop500_uib_init(void)
+int __init mop500_uib_init(void)
 {
 	struct uib *uib = mop500_uib;
 	struct i2c_adapter *i2c0;
 	int ret;
 
-	if (!cpu_is_u8500())
+	if (!cpu_is_u8500_family())
 		return -ENODEV;
 
 	if (uib) {
@@ -131,5 +131,3 @@ static int __init mop500_uib_init(void)
 
 	return 0;
 }
-
-module_init(mop500_uib_init);
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 77d03c1fbd04..9c74ac545849 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -1,3 +1,4 @@
+
 /*
  * Copyright (C) 2008-2009 ST-Ericsson
  *
@@ -29,30 +30,30 @@
 #include <linux/smsc911x.h>
 #include <linux/gpio_keys.h>
 #include <linux/delay.h>
-
 #include <linux/of.h>
 #include <linux/of_platform.h>
-
 #include <linux/leds.h>
+#include <linux/pinctrl/consumer.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/hardware/gic.h>
 
 #include <plat/i2c.h>
 #include <plat/ste_dma40.h>
-#include <plat/pincfg.h>
 #include <plat/gpio-nomadik.h>
 
 #include <mach/hardware.h>
 #include <mach/setup.h>
 #include <mach/devices.h>
 #include <mach/irqs.h>
+#include <mach/crypto-ux500.h>
 
-#include "pins-db8500.h"
 #include "ste-dma40-db8500.h"
 #include "devices-db8500.h"
 #include "board-mop500.h"
 #include "board-mop500-regulators.h"
+#include "board-mop500-msp.h"
 
 static struct gpio_led snowball_led_array[] = {
 	{
@@ -205,7 +206,7 @@ static struct resource ab8500_resources[] = {
 };
 
 struct platform_device ab8500_device = {
-	.name = "ab8500-i2c",
+	.name = "ab8500-core",
 	.id = 0,
 	.dev = {
 		.platform_data = &ab8500_platdata,
@@ -417,6 +418,45 @@ static void mop500_prox_deactivate(struct device *dev)
 	regulator_put(prox_regulator);
 }
 
+static struct cryp_platform_data u8500_cryp1_platform_data = {
+		.mem_to_engine = {
+				.dir = STEDMA40_MEM_TO_PERIPH,
+				.src_dev_type = STEDMA40_DEV_SRC_MEMORY,
+				.dst_dev_type = DB8500_DMA_DEV48_CAC1_TX,
+				.src_info.data_width = STEDMA40_WORD_WIDTH,
+				.dst_info.data_width = STEDMA40_WORD_WIDTH,
+				.mode = STEDMA40_MODE_LOGICAL,
+				.src_info.psize = STEDMA40_PSIZE_LOG_4,
+				.dst_info.psize = STEDMA40_PSIZE_LOG_4,
+		},
+		.engine_to_mem = {
+				.dir = STEDMA40_PERIPH_TO_MEM,
+				.src_dev_type = DB8500_DMA_DEV48_CAC1_RX,
+				.dst_dev_type = STEDMA40_DEV_DST_MEMORY,
+				.src_info.data_width = STEDMA40_WORD_WIDTH,
+				.dst_info.data_width = STEDMA40_WORD_WIDTH,
+				.mode = STEDMA40_MODE_LOGICAL,
+				.src_info.psize = STEDMA40_PSIZE_LOG_4,
+				.dst_info.psize = STEDMA40_PSIZE_LOG_4,
+		}
+};
+
+static struct stedma40_chan_cfg u8500_hash_dma_cfg_tx = {
+		.dir = STEDMA40_MEM_TO_PERIPH,
+		.src_dev_type = STEDMA40_DEV_SRC_MEMORY,
+		.dst_dev_type = DB8500_DMA_DEV50_HAC1_TX,
+		.src_info.data_width = STEDMA40_WORD_WIDTH,
+		.dst_info.data_width = STEDMA40_WORD_WIDTH,
+		.mode = STEDMA40_MODE_LOGICAL,
+		.src_info.psize = STEDMA40_PSIZE_LOG_16,
+		.dst_info.psize = STEDMA40_PSIZE_LOG_16,
+};
+
+static struct hash_platform_data u8500_hash1_platform_data = {
+		.mem_to_engine = &u8500_hash_dma_cfg_tx,
+		.dma_filter = stedma40_filter,
+};
+
 /* add any platform devices here - TODO */
 static struct platform_device *mop500_platform_devs[] __initdata = {
 	&mop500_gpio_keys_device,
@@ -520,14 +560,6 @@ static struct stedma40_chan_cfg uart2_dma_cfg_tx = {
 };
 #endif
 
-
-static pin_cfg_t mop500_pins_uart0[] = {
-	GPIO0_U0_CTSn   | PIN_INPUT_PULLUP,
-	GPIO1_U0_RTSn   | PIN_OUTPUT_HIGH,
-	GPIO2_U0_RXD    | PIN_INPUT_PULLUP,
-	GPIO3_U0_TXD    | PIN_OUTPUT_HIGH,
-};
-
 #define PRCC_K_SOFTRST_SET      0x18
 #define PRCC_K_SOFTRST_CLEAR    0x1C
 static void ux500_uart0_reset(void)
@@ -548,24 +580,33 @@ static void ux500_uart0_reset(void)
 	udelay(1);
 }
 
+/* This needs to be referenced by callbacks */
+struct pinctrl *u0_p;
+struct pinctrl_state *u0_def;
+struct pinctrl_state *u0_sleep;
+
 static void ux500_uart0_init(void)
 {
 	int ret;
 
-	ret = nmk_config_pins(mop500_pins_uart0,
-			ARRAY_SIZE(mop500_pins_uart0));
-	if (ret < 0)
-		pr_err("pl011: uart pins_enable failed\n");
+	if (IS_ERR(u0_p) || IS_ERR(u0_def))
+		return;
+
+	ret = pinctrl_select_state(u0_p, u0_def);
+	if (ret)
+		pr_err("could not set UART0 defstate\n");
 }
 
 static void ux500_uart0_exit(void)
 {
 	int ret;
 
-	ret = nmk_config_pins_sleep(mop500_pins_uart0,
-			ARRAY_SIZE(mop500_pins_uart0));
-	if (ret < 0)
-		pr_err("pl011: uart pins_disable failed\n");
+	if (IS_ERR(u0_p) || IS_ERR(u0_sleep))
+		return;
+
+	ret = pinctrl_select_state(u0_p, u0_sleep);
+	if (ret)
+		pr_err("could not set UART0 idlestate\n");
 }
 
 static struct amba_pl011_data uart0_plat = {
@@ -597,11 +638,38 @@ static struct amba_pl011_data uart2_plat = {
 
 static void __init mop500_uart_init(struct device *parent)
 {
-	db8500_add_uart0(parent, &uart0_plat);
+	struct amba_device *uart0_device;
+
+	uart0_device = db8500_add_uart0(parent, &uart0_plat);
+	if (uart0_device) {
+		u0_p = pinctrl_get(&uart0_device->dev);
+		if (IS_ERR(u0_p))
+			dev_err(&uart0_device->dev,
+				"could not get UART0 pinctrl\n");
+		else {
+			u0_def = pinctrl_lookup_state(u0_p,
+						      PINCTRL_STATE_DEFAULT);
+			if (IS_ERR(u0_def)) {
+				dev_err(&uart0_device->dev,
+					"could not get UART0 defstate\n");
+			}
+			u0_sleep = pinctrl_lookup_state(u0_p,
+							PINCTRL_STATE_SLEEP);
+			if (IS_ERR(u0_sleep))
+				dev_err(&uart0_device->dev,
+					"could not get UART0 idlestate\n");
+		}
+	}
 	db8500_add_uart1(parent, &uart1_plat);
 	db8500_add_uart2(parent, &uart2_plat);
 }
 
+static void __init u8500_cryp1_hash1_init(struct device *parent)
+{
+	db8500_add_cryp1(parent, &u8500_cryp1_platform_data);
+	db8500_add_hash1(parent, &u8500_hash1_platform_data);
+}
+
 static struct platform_device *snowball_platform_devs[] __initdata = {
 	&snowball_led_dev,
 	&snowball_key_dev,
@@ -609,6 +677,11 @@ static struct platform_device *snowball_platform_devs[] __initdata = {
 	&ab8500_device,
 };
 
+static struct platform_device *snowball_of_platform_devs[] __initdata = {
+	&snowball_led_dev,
+	&snowball_key_dev,
+};
+
 static void __init mop500_init_machine(void)
 {
 	struct device *parent = NULL;
@@ -617,10 +690,9 @@ static void __init mop500_init_machine(void)
 
 	mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;
 
+	mop500_pinmaps_init();
 	parent = u8500_init_devices();
 
-	mop500_pins_init();
-
 	/* FIXME: parent of ab8500 should be prcmu */
 	for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++)
 		mop500_platform_devs[i]->dev.parent = parent;
@@ -631,8 +703,11 @@ static void __init mop500_init_machine(void)
 	mop500_i2c_init(parent);
 	mop500_sdi_init(parent);
 	mop500_spi_init(parent);
+	mop500_msp_init(parent);
 	mop500_uart_init(parent);
 
+	u8500_cryp1_hash1_init(parent);
+
 	i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
 
 	i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
@@ -641,18 +716,18 @@ static void __init mop500_init_machine(void)
 
 	/* This board has full regulator constraints */
 	regulator_has_full_constraints();
+
+	mop500_uib_init();
 }
 
 static void __init snowball_init_machine(void)
 {
 	struct device *parent = NULL;
-	int i2c0_devs;
 	int i;
 
+	snowball_pinmaps_init();
 	parent = u8500_init_devices();
 
-	snowball_pins_init();
-
 	for (i = 0; i < ARRAY_SIZE(snowball_platform_devs); i++)
 		snowball_platform_devs[i]->dev.parent = parent;
 
@@ -662,13 +737,9 @@ static void __init snowball_init_machine(void)
 	mop500_i2c_init(parent);
 	snowball_sdi_init(parent);
 	mop500_spi_init(parent);
+	mop500_msp_init(parent);
 	mop500_uart_init(parent);
 
-	i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
-	i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
-	i2c_register_board_info(2, mop500_i2c2_devices,
-				ARRAY_SIZE(mop500_i2c2_devices));
-
 	/* This board has full regulator constraints */
 	regulator_has_full_constraints();
 }
@@ -686,10 +757,9 @@ static void __init hrefv60_init_machine(void)
 	 */
 	mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO;
 
+	hrefv60_pinmaps_init();
 	parent = u8500_init_devices();
 
-	hrefv60_pins_init();
-
 	for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++)
 		mop500_platform_devs[i]->dev.parent = parent;
 
@@ -699,6 +769,7 @@ static void __init hrefv60_init_machine(void)
 	mop500_i2c_init(parent);
 	hrefv60_sdi_init(parent);
 	mop500_spi_init(parent);
+	mop500_msp_init(parent);
 	mop500_uart_init(parent);
 
 	i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
@@ -711,6 +782,8 @@ static void __init hrefv60_init_machine(void)
 
 	/* This board has full regulator constraints */
 	regulator_has_full_constraints();
+
+	mop500_uib_init();
 }
 
 MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
@@ -722,6 +795,7 @@ MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
 	.timer		= &ux500_timer,
 	.handle_irq	= gic_handle_irq,
 	.init_machine	= mop500_init_machine,
+	.init_late	= ux500_init_late,
 MACHINE_END
 
 MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+")
@@ -731,6 +805,7 @@ MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+")
 	.timer		= &ux500_timer,
 	.handle_irq	= gic_handle_irq,
 	.init_machine	= hrefv60_init_machine,
+	.init_late	= ux500_init_late,
 MACHINE_END
 
 MACHINE_START(SNOWBALL, "Calao Systems Snowball platform")
@@ -741,21 +816,39 @@ MACHINE_START(SNOWBALL, "Calao Systems Snowball platform")
 	.timer		= &ux500_timer,
 	.handle_irq	= gic_handle_irq,
 	.init_machine	= snowball_init_machine,
+	.init_late	= ux500_init_late,
 MACHINE_END
 
 #ifdef CONFIG_MACH_UX500_DT
 
 struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
+	/* Requires DMA and call-back bindings. */
 	OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", &uart0_plat),
 	OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", &uart1_plat),
 	OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", &uart2_plat),
+	/* Requires DMA bindings. */
 	OF_DEV_AUXDATA("arm,pl022", 0x80002000, "ssp0",  &ssp0_plat),
+	/* Requires clock name bindings. */
+	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e000, "gpio.0", NULL),
+	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e080, "gpio.1", NULL),
+	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e000, "gpio.2", NULL),
+	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e080, "gpio.3", NULL),
+	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e100, "gpio.4", NULL),
+	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e180, "gpio.5", NULL),
+	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e000, "gpio.6", NULL),
+	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e080, "gpio.7", NULL),
+	OF_DEV_AUXDATA("st,nomadik-gpio", 0xa03fe000, "gpio.8", NULL),
 	{},
 };
 
-static const struct of_device_id u8500_soc_node[] = {
+static const struct of_device_id u8500_local_bus_nodes[] = {
 	/* only create devices below soc node */
 	{ .compatible = "stericsson,db8500", },
+	{ .compatible = "stericsson,db8500-prcmu", },
+	{ .compatible = "stericsson,db8500-prcmu-regulator", },
+	{ .compatible = "stericsson,ab8500", },
+	{ .compatible = "stericsson,ab8500-regulator", },
+	{ .compatible = "simple-bus"},
 	{ },
 };
 
@@ -765,8 +858,15 @@ static void __init u8500_init_machine(void)
 	int i2c0_devs;
 	int i;
 
-	parent = u8500_init_devices();
-	i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
+	/* Pinmaps must be in place before devices register */
+	if (of_machine_is_compatible("st-ericsson,mop500"))
+		mop500_pinmaps_init();
+	else if (of_machine_is_compatible("calaosystems,snowball-a9500"))
+		snowball_pinmaps_init();
+	else if (of_machine_is_compatible("st-ericsson,hrefv60+"))
+		hrefv60_pinmaps_init();
+
+	parent = u8500_of_init_devices();
 
 	for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++)
 		mop500_platform_devs[i]->dev.parent = parent;
@@ -774,20 +874,32 @@ static void __init u8500_init_machine(void)
 		snowball_platform_devs[i]->dev.parent = parent;
 
 	/* automatically probe child nodes of db8500 device */
-	of_platform_populate(NULL, u8500_soc_node, u8500_auxdata_lookup, parent);
+	of_platform_populate(NULL, u8500_local_bus_nodes, u8500_auxdata_lookup, parent);
 
 	if (of_machine_is_compatible("st-ericsson,mop500")) {
 		mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;
-		mop500_pins_init();
 
 		platform_add_devices(mop500_platform_devs,
 				ARRAY_SIZE(mop500_platform_devs));
 
 		mop500_sdi_init(parent);
+		i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
+		i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
+		i2c_register_board_info(2, mop500_i2c2_devices,
+					ARRAY_SIZE(mop500_i2c2_devices));
+
+		mop500_uib_init();
+
 	} else if (of_machine_is_compatible("calaosystems,snowball-a9500")) {
-		snowball_pins_init();
-		platform_add_devices(snowball_platform_devs,
-				ARRAY_SIZE(snowball_platform_devs));
+		/*
+		 * Devices to be DT:ed:
+		 *   snowball_led_dev   = todo
+		 *   snowball_key_dev   = todo
+		 *   snowball_sbnet_dev = done
+		 *   ab8500_device      = done
+		 */
+		platform_add_devices(snowball_of_platform_devs,
+				ARRAY_SIZE(snowball_of_platform_devs));
 
 		snowball_sdi_init(parent);
 	} else if (of_machine_is_compatible("st-ericsson,hrefv60+")) {
@@ -797,19 +909,22 @@ static void __init u8500_init_machine(void)
 		 * instead.
 		 */
 		mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO;
-		i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES;
-		hrefv60_pins_init();
 		platform_add_devices(mop500_platform_devs,
 				ARRAY_SIZE(mop500_platform_devs));
 
 		hrefv60_sdi_init(parent);
+
+		i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
+		i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES;
+
+		i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
+		i2c_register_board_info(2, mop500_i2c2_devices,
+					ARRAY_SIZE(mop500_i2c2_devices));
+
+		mop500_uib_init();
 	}
 	mop500_i2c_init(parent);
 
-	i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
-	i2c_register_board_info(2, mop500_i2c2_devices,
-				ARRAY_SIZE(mop500_i2c2_devices));
-
 	/* This board has full regulator constraints */
 	regulator_has_full_constraints();
 }
@@ -830,6 +945,7 @@ DT_MACHINE_START(U8500_DT, "ST-Ericsson U8500 platform (Device Tree Support)")
 	.timer		= &ux500_timer,
 	.handle_irq	= gic_handle_irq,
 	.init_machine	= u8500_init_machine,
+	.init_late	= ux500_init_late,
 	.dt_compat      = u8500_dt_board_compat,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h
index fdcfa8721bb4..2f87b25a908a 100644
--- a/arch/arm/mach-ux500/board-mop500.h
+++ b/arch/arm/mach-ux500/board-mop500.h
@@ -7,6 +7,9 @@
 #ifndef __BOARD_MOP500_H
 #define __BOARD_MOP500_H
 
+/* For NOMADIK_NR_GPIO */
+#include <mach/irqs.h>
+
 /* Snowball specific GPIO assignments, this board has no GPIO expander */
 #define SNOWBALL_ACCEL_INT1_GPIO	163
 #define SNOWBALL_ACCEL_INT2_GPIO	164
@@ -73,6 +76,7 @@
 #define SNOWBALL_PME_ETH_GPIO		MOP500_AB8500_PIN_GPIO(24)	/* SYSCLKREQ7/GPIO24 */
 #define SNOWBALL_EN_3V3_ETH_GPIO	MOP500_AB8500_PIN_GPIO(26)	/* GPIO26 */
 
+struct device;
 struct i2c_board_info;
 
 extern void mop500_sdi_init(struct device *parent);
@@ -81,11 +85,15 @@ extern void hrefv60_sdi_init(struct device *parent);
 extern void mop500_sdi_tc35892_init(struct device *parent);
 void __init mop500_u8500uib_init(void);
 void __init mop500_stuib_init(void);
-void __init mop500_pins_init(void);
-void __init hrefv60_pins_init(void);
-void __init snowball_pins_init(void);
+void __init mop500_pinmaps_init(void);
+void __init snowball_pinmaps_init(void);
+void __init hrefv60_pinmaps_init(void);
 
+int __init mop500_uib_init(void);
 void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info,
 		unsigned n);
 
+/* TODO: Once all pieces are DT:ed, remove completely. */
+struct device * __init u8500_of_init_devices(void);
+
 #endif
diff --git a/arch/arm/mach-ux500/board-u5500-sdi.c b/arch/arm/mach-ux500/board-u5500-sdi.c
deleted file mode 100644
index 836112eedde7..000000000000
--- a/arch/arm/mach-ux500/board-u5500-sdi.c
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Hanumath Prasad <ulf.hansson@stericsson.com>
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#include <linux/amba/mmci.h>
-#include <linux/mmc/host.h>
-
-#include <plat/pincfg.h>
-#include <plat/gpio-nomadik.h>
-#include <mach/db5500-regs.h>
-#include <plat/ste_dma40.h>
-
-#include "pins-db5500.h"
-#include "devices-db5500.h"
-#include "ste-dma40-db5500.h"
-
-static pin_cfg_t u5500_sdi_pins[] = {
-	/* SDI0 (POP eMMC) */
-	GPIO5_MC0_DAT0		| PIN_DIR_INPUT | PIN_PULL_UP,
-	GPIO6_MC0_DAT1		| PIN_DIR_INPUT | PIN_PULL_UP,
-	GPIO7_MC0_DAT2		| PIN_DIR_INPUT | PIN_PULL_UP,
-	GPIO8_MC0_DAT3		| PIN_DIR_INPUT | PIN_PULL_UP,
-	GPIO9_MC0_DAT4		| PIN_DIR_INPUT | PIN_PULL_UP,
-	GPIO10_MC0_DAT5		| PIN_DIR_INPUT | PIN_PULL_UP,
-	GPIO11_MC0_DAT6		| PIN_DIR_INPUT | PIN_PULL_UP,
-	GPIO12_MC0_DAT7		| PIN_DIR_INPUT | PIN_PULL_UP,
-	GPIO13_MC0_CMD		| PIN_DIR_INPUT | PIN_PULL_UP,
-	GPIO14_MC0_CLK		| PIN_DIR_OUTPUT | PIN_VAL_LOW,
-};
-
-#ifdef CONFIG_STE_DMA40
-struct stedma40_chan_cfg u5500_sdi0_dma_cfg_rx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = STEDMA40_PERIPH_TO_MEM,
-	.src_dev_type = DB5500_DMA_DEV24_SDMMC0_RX,
-	.dst_dev_type = STEDMA40_DEV_DST_MEMORY,
-	.src_info.data_width = STEDMA40_WORD_WIDTH,
-	.dst_info.data_width = STEDMA40_WORD_WIDTH,
-};
-
-static struct stedma40_chan_cfg u5500_sdi0_dma_cfg_tx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = STEDMA40_MEM_TO_PERIPH,
-	.src_dev_type = STEDMA40_DEV_SRC_MEMORY,
-	.dst_dev_type = DB5500_DMA_DEV24_SDMMC0_TX,
-	.src_info.data_width = STEDMA40_WORD_WIDTH,
-	.dst_info.data_width = STEDMA40_WORD_WIDTH,
-};
-#endif
-
-static struct mmci_platform_data u5500_sdi0_data = {
-	.ocr_mask	= MMC_VDD_165_195,
-	.f_max		= 50000000,
-	.capabilities	= MMC_CAP_4_BIT_DATA |
-				MMC_CAP_8_BIT_DATA |
-				MMC_CAP_MMC_HIGHSPEED,
-	.gpio_cd	= -1,
-	.gpio_wp	= -1,
-#ifdef CONFIG_STE_DMA40
-	.dma_filter	= stedma40_filter,
-	.dma_rx_param	= &u5500_sdi0_dma_cfg_rx,
-	.dma_tx_param	= &u5500_sdi0_dma_cfg_tx,
-#endif
-};
-
-void __init u5500_sdi_init(struct device *parent)
-{
-	nmk_config_pins(u5500_sdi_pins, ARRAY_SIZE(u5500_sdi_pins));
-
-	db5500_add_sdi0(parent, &u5500_sdi0_data);
-}
diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c
deleted file mode 100644
index 0ff4be72a809..000000000000
--- a/arch/arm/mach-ux500/board-u5500.c
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/amba/bus.h>
-#include <linux/irq.h>
-#include <linux/i2c.h>
-#include <linux/mfd/abx500/ab5500.h>
-
-#include <asm/hardware/gic.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <plat/pincfg.h>
-#include <plat/i2c.h>
-#include <plat/gpio-nomadik.h>
-
-#include <mach/hardware.h>
-#include <mach/devices.h>
-#include <mach/setup.h>
-
-#include "pins-db5500.h"
-#include "devices-db5500.h"
-#include <linux/led-lm3530.h>
-
-/*
- * GPIO
- */
-
-static pin_cfg_t u5500_pins[] = {
-	/* I2C */
-	GPIO218_I2C2_SCL        | PIN_INPUT_PULLUP,
-	GPIO219_I2C2_SDA        | PIN_INPUT_PULLUP,
-
-	/* DISPLAY_ENABLE */
-	GPIO226_GPIO        | PIN_OUTPUT_LOW,
-
-	/* Backlight Enbale */
-	GPIO224_GPIO        | PIN_OUTPUT_HIGH,
-};
-/*
- * I2C
- */
-
-#define U5500_I2C_CONTROLLER(id, _slsu, _tft, _rft, clk, _sm) \
-static struct nmk_i2c_controller u5500_i2c##id##_data = { \
-	/*				\
-	 * slave data setup time, which is	\
-	 * 250 ns,100ns,10ns which is 14,6,2	\
-	 * respectively for a 48 Mhz	\
-	 * i2c clock			\
-	 */				\
-	.slsu		= _slsu,	\
-	/* Tx FIFO threshold */		\
-	.tft		= _tft,		\
-	/* Rx FIFO threshold */		\
-	.rft		= _rft,		\
-	/* std. mode operation */	\
-	.clk_freq	= clk,		\
-	.sm		= _sm,		\
-}
-/*
- * The board uses TODO <3> i2c controllers, initialize all of
- * them with slave data setup time of 250 ns,
- * Tx & Rx FIFO threshold values as 1 and standard
- * mode of operation
- */
-
-U5500_I2C_CONTROLLER(2,	0xe, 1, 1, 400000, I2C_FREQ_MODE_FAST);
-
-static struct lm3530_platform_data u5500_als_platform_data = {
-	.mode = LM3530_BL_MODE_MANUAL,
-	.als_input_mode = LM3530_INPUT_ALS1,
-	.max_current = LM3530_FS_CURR_26mA,
-	.pwm_pol_hi = true,
-	.als_avrg_time = LM3530_ALS_AVRG_TIME_512ms,
-	.brt_ramp_law = 1,      /* Linear */
-	.brt_ramp_fall = LM3530_RAMP_TIME_8s,
-	.brt_ramp_rise = LM3530_RAMP_TIME_8s,
-	.als1_resistor_sel = LM3530_ALS_IMPD_13_53kOhm,
-	.als2_resistor_sel = LM3530_ALS_IMPD_Z,
-	.als_vmin = 730,	/* mV */
-	.als_vmax = 1020,	/* mV */
-	.brt_val = 0x7F,	/* Max brightness */
-};
-
-static struct i2c_board_info __initdata u5500_i2c2_devices[] = {
-	{
-		/* Backlight */
-		I2C_BOARD_INFO("lm3530-led", 0x36),
-		.platform_data = &u5500_als_platform_data,
-	},
-};
-
-static void __init u5500_i2c_init(struct device *parent)
-{
-	db5500_add_i2c2(parent, &u5500_i2c2_data);
-	i2c_register_board_info(2, ARRAY_AND_SIZE(u5500_i2c2_devices));
-}
-
-static struct ab5500_platform_data ab5500_plf_data = {
-	.irq = {
-		.base = 0,
-		.count = 0,
-	},
-	.init_settings = NULL,
-	.init_settings_sz = 0,
-	.pm_power_off = false,
-};
-
-static struct platform_device ab5500_device = {
-	.name = "ab5500-core",
-	.id = 0,
-	.dev = {
-		.platform_data = &ab5500_plf_data,
-	},
-	.num_resources = 0,
-};
-
-static struct platform_device *u5500_platform_devices[] __initdata = {
-	&ab5500_device,
-};
-
-static void __init u5500_uart_init(struct device *parent)
-{
-	db5500_add_uart0(parent, NULL);
-	db5500_add_uart1(parent, NULL);
-	db5500_add_uart2(parent, NULL);
-}
-
-static void __init u5500_init_machine(void)
-{
-	struct device *parent = NULL;
-	int i;
-
-	parent = u5500_init_devices();
-	nmk_config_pins(u5500_pins, ARRAY_SIZE(u5500_pins));
-
-	u5500_i2c_init(parent);
-	u5500_sdi_init(parent);
-	u5500_uart_init(parent);
-
-	for (i = 0; i < ARRAY_SIZE(u5500_platform_devices); i++)
-		u5500_platform_devices[i]->dev.parent = parent;
-
-	platform_add_devices(u5500_platform_devices,
-		ARRAY_SIZE(u5500_platform_devices));
-}
-
-MACHINE_START(U5500, "ST-Ericsson U5500 Platform")
-	.atag_offset	= 0x100,
-	.map_io		= u5500_map_io,
-	.init_irq	= ux500_init_irq,
-	.timer		= &ux500_timer,
-	.handle_irq	= gic_handle_irq,
-	.init_machine	= u5500_init_machine,
-MACHINE_END
diff --git a/arch/arm/mach-ux500/cache-l2x0.c b/arch/arm/mach-ux500/cache-l2x0.c
index 77a75ed0df67..dc12394295d5 100644
--- a/arch/arm/mach-ux500/cache-l2x0.c
+++ b/arch/arm/mach-ux500/cache-l2x0.c
@@ -36,9 +36,9 @@ static int __init ux500_l2x0_unlock(void)
 
 static int __init ux500_l2x0_init(void)
 {
-	if (cpu_is_u5500())
-		l2x0_base = __io_address(U5500_L2CC_BASE);
-	else if (cpu_is_u8500())
+	u32 aux_val = 0x3e000000;
+
+	if (cpu_is_u8500_family())
 		l2x0_base = __io_address(U8500_L2CC_BASE);
 	else
 		ux500_unknown_soc();
@@ -46,11 +46,19 @@ static int __init ux500_l2x0_init(void)
 	/* Unlock before init */
 	ux500_l2x0_unlock();
 
+	/* DB9540's L2 has 128KB way size */
+	if (cpu_is_u9540())
+		/* 128KB way size */
+		aux_val |= (0x4 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT);
+	else
+		/* 64KB way size */
+		aux_val |= (0x3 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT);
+
 	/* 64KB way size, 8 way associativity, force WA */
 	if (of_have_populated_dt())
-		l2x0_of_init(0x3e060000, 0xc0000fff);
+		l2x0_of_init(aux_val, 0xc0000fff);
 	else
-		l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff);
+		l2x0_init(l2x0_base, aux_val, 0xc0000fff);
 
 	/*
 	 * We can't disable l2 as we are in non secure mode, currently
diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c
index ec35f0aa5665..8d73b066a18d 100644
--- a/arch/arm/mach-ux500/clock.c
+++ b/arch/arm/mach-ux500/clock.c
@@ -149,9 +149,7 @@ static unsigned long clk_mtu_get_rate(struct clk *clk)
 	unsigned long mturate;
 	unsigned long retclk;
 
-	if (cpu_is_u5500())
-		addr = __io_address(U5500_PRCMU_BASE);
-	else if (cpu_is_u8500())
+	if (cpu_is_u8500_family())
 		addr = __io_address(U8500_PRCMU_BASE);
 	else
 		ux500_unknown_soc();
@@ -336,6 +334,7 @@ static DEFINE_PRCMU_CLK(uiccclk,	0x4, 1, UICCCLK); /* v1 */
  */
 
 /* Peripheral Cluster #1 */
+static DEFINE_PRCC_CLK(1, msp3,		11, 10, &clk_msp1clk);
 static DEFINE_PRCC_CLK(1, i2c4,		10, 9, &clk_i2cclk);
 static DEFINE_PRCC_CLK(1, gpio0,	9, -1, NULL);
 static DEFINE_PRCC_CLK(1, slimbus0,	8,  8, &clk_slimclk);
@@ -382,14 +381,15 @@ static DEFINE_PRCC_CLK(5, usb,		0,  0, NULL);
 /* Peripheral Cluster #6 */
 
 /* MTU ID in data */
-static DEFINE_PRCC_CLK_CUSTOM(6, mtu1, 8, -1, NULL, clk_mtu_get_rate, 1);
-static DEFINE_PRCC_CLK_CUSTOM(6, mtu0, 7, -1, NULL, clk_mtu_get_rate, 0);
-static DEFINE_PRCC_CLK(6, cfgreg,	6,  6, NULL);
-static DEFINE_PRCC_CLK(6, hash1,	5, -1, NULL);
-static DEFINE_PRCC_CLK(6, unipro,	4,  1, &clk_uniproclk);
-static DEFINE_PRCC_CLK(6, pka,		3, -1, NULL);
-static DEFINE_PRCC_CLK(6, hash0,	2, -1, NULL);
-static DEFINE_PRCC_CLK(6, cryp0,	1, -1, NULL);
+static DEFINE_PRCC_CLK_CUSTOM(6, mtu1, 9, -1, NULL, clk_mtu_get_rate, 1);
+static DEFINE_PRCC_CLK_CUSTOM(6, mtu0, 8, -1, NULL, clk_mtu_get_rate, 0);
+static DEFINE_PRCC_CLK(6, cfgreg,	7,  7, NULL);
+static DEFINE_PRCC_CLK(6, hash1,	6, -1, NULL);
+static DEFINE_PRCC_CLK(6, unipro,	5,  1, &clk_uniproclk);
+static DEFINE_PRCC_CLK(6, pka,		4, -1, NULL);
+static DEFINE_PRCC_CLK(6, hash0,	3, -1, NULL);
+static DEFINE_PRCC_CLK(6, cryp0,	2, -1, NULL);
+static DEFINE_PRCC_CLK(6, cryp1,    1, -1, NULL);
 static DEFINE_PRCC_CLK(6, rng,	0,  0, &clk_rngclk);
 
 static struct clk clk_dummy_apb_pclk = {
@@ -405,7 +405,7 @@ static struct clk_lookup u8500_clks[] = {
 	CLK(slimbus0,	"slimbus0",	NULL),
 	CLK(i2c2,	"nmk-i2c.2",	NULL),
 	CLK(sdi0,	"sdi0",		NULL),
-	CLK(msp0,	"msp0",		NULL),
+	CLK(msp0,	"ux500-msp-i2s.0",	NULL),
 	CLK(i2c1,	"nmk-i2c.1",	NULL),
 	CLK(uart1,	"uart1",	NULL),
 	CLK(uart0,	"uart0",	NULL),
@@ -431,6 +431,7 @@ static struct clk_lookup u8500_clks[] = {
 	CLK(pka,	"pka",		NULL),
 	CLK(hash0,	"hash0",	NULL),
 	CLK(cryp0,	"cryp0",	NULL),
+	CLK(cryp1,  "cryp1",    NULL),
 
 	/* PRCMU level clock gating */
 
@@ -455,7 +456,8 @@ static struct clk_lookup u8500_clks[] = {
 	/* Peripheral Cluster #1 */
 	CLK(i2c4,	"nmk-i2c.4",	NULL),
 	CLK(spi3,	"spi3",		NULL),
-	CLK(msp1,	"msp1",		NULL),
+	CLK(msp1,	"ux500-msp-i2s.1",	NULL),
+	CLK(msp3,	"ux500-msp-i2s.3",	NULL),
 
 	/* Peripheral Cluster #2 */
 	CLK(gpio1,	"gpio.6",	NULL),
@@ -465,7 +467,7 @@ static struct clk_lookup u8500_clks[] = {
 	CLK(spi0,	"spi0",		NULL),
 	CLK(sdi3,	"sdi3",		NULL),
 	CLK(sdi1,	"sdi1",		NULL),
-	CLK(msp2,	"msp2",		NULL),
+	CLK(msp2,	"ux500-msp-i2s.2",	NULL),
 	CLK(sdi4,	"sdi4",		NULL),
 	CLK(pwl,	"pwl",		NULL),
 	CLK(spi1,	"spi1",		NULL),
@@ -633,7 +635,7 @@ static int clk_debugfs_register(struct clk *c)
 	return 0;
 }
 
-static int __init clk_debugfs_init(void)
+int __init clk_debugfs_init(void)
 {
 	struct clk *c;
 	struct dentry *d;
@@ -655,7 +657,6 @@ err_out:
 	return err;
 }
 
-late_initcall(clk_debugfs_init);
 #endif /* defined(CONFIG_DEBUG_FS) */
 
 unsigned long clk_smp_twd_rate = 500000000;
@@ -694,25 +695,16 @@ static struct notifier_block clk_twd_cpufreq_nb = {
 	.notifier_call = clk_twd_cpufreq_transition,
 };
 
-static int clk_init_smp_twd_cpufreq(void)
+int clk_init_smp_twd_cpufreq(void)
 {
 	return cpufreq_register_notifier(&clk_twd_cpufreq_nb,
 				  CPUFREQ_TRANSITION_NOTIFIER);
 }
-late_initcall(clk_init_smp_twd_cpufreq);
 
 #endif
 
 int __init clk_init(void)
 {
-	if (cpu_is_u5500()) {
-		/* Clock tree for U5500 not implemented yet */
-		clk_prcc_ops.enable = clk_prcc_ops.disable = NULL;
-		clk_prcmu_ops.enable = clk_prcmu_ops.disable = NULL;
-		clk_uartclk.rate = 36360000;
-		clk_sdmmcclk.rate = 99900000;
-	}
-
 	clkdev_add_table(u8500_clks, ARRAY_SIZE(u8500_clks));
 	clkdev_add(&clk_smp_twd_lookup);
 
diff --git a/arch/arm/mach-ux500/clock.h b/arch/arm/mach-ux500/clock.h
index d776ada08dbf..65d27a13f46d 100644
--- a/arch/arm/mach-ux500/clock.h
+++ b/arch/arm/mach-ux500/clock.h
@@ -150,3 +150,15 @@ struct clk clk_##_name = {						\
 
 int __init clk_db8500_ed_fixup(void);
 int __init clk_init(void);
+
+#ifdef CONFIG_DEBUG_FS
+int clk_debugfs_init(void);
+#else
+static inline int clk_debugfs_init(void) { return 0; }
+#endif
+
+#ifdef CONFIG_CPU_FREQ
+int clk_init_smp_twd_cpufreq(void);
+#else
+static inline int clk_init_smp_twd_cpufreq(void) { return 0; }
+#endif
diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c
deleted file mode 100644
index bca47f32082f..000000000000
--- a/arch/arm/mach-ux500/cpu-db5500.c
+++ /dev/null
@@ -1,247 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#include <linux/platform_device.h>
-#include <linux/amba/bus.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-
-#include <asm/mach/map.h>
-#include <asm/pmu.h>
-
-#include <plat/gpio-nomadik.h>
-
-#include <mach/hardware.h>
-#include <mach/devices.h>
-#include <mach/setup.h>
-#include <mach/irqs.h>
-#include <mach/usb.h>
-
-#include "devices-db5500.h"
-#include "ste-dma40-db5500.h"
-
-static struct map_desc u5500_uart_io_desc[] __initdata = {
-	__IO_DEV_DESC(U5500_UART0_BASE, SZ_4K),
-	__IO_DEV_DESC(U5500_UART2_BASE, SZ_4K),
-};
-
-static struct map_desc u5500_io_desc[] __initdata = {
-	/* SCU base also covers GIC CPU BASE and TWD with its 4K page */
-	__IO_DEV_DESC(U5500_SCU_BASE, SZ_4K),
-	__IO_DEV_DESC(U5500_GIC_DIST_BASE, SZ_4K),
-	__IO_DEV_DESC(U5500_L2CC_BASE, SZ_4K),
-	__IO_DEV_DESC(U5500_MTU0_BASE, SZ_4K),
-	__IO_DEV_DESC(U5500_BACKUPRAM0_BASE, SZ_8K),
-
-	__IO_DEV_DESC(U5500_GPIO0_BASE, SZ_4K),
-	__IO_DEV_DESC(U5500_GPIO1_BASE, SZ_4K),
-	__IO_DEV_DESC(U5500_GPIO2_BASE, SZ_4K),
-	__IO_DEV_DESC(U5500_GPIO3_BASE, SZ_4K),
-	__IO_DEV_DESC(U5500_GPIO4_BASE, SZ_4K),
-	__IO_DEV_DESC(U5500_PRCMU_BASE, SZ_4K),
-	__IO_DEV_DESC(U5500_PRCMU_TCDM_BASE, SZ_4K),
-};
-
-static struct resource mbox0_resources[] = {
-	{
-		.name = "mbox_peer",
-		.start = U5500_MBOX0_PEER_START,
-		.end = U5500_MBOX0_PEER_END,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name = "mbox_local",
-		.start = U5500_MBOX0_LOCAL_START,
-		.end = U5500_MBOX0_LOCAL_END,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name = "mbox_irq",
-		.start = MBOX_PAIR0_VIRT_IRQ,
-		.end = MBOX_PAIR0_VIRT_IRQ,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static struct resource mbox1_resources[] = {
-	{
-		.name = "mbox_peer",
-		.start = U5500_MBOX1_PEER_START,
-		.end = U5500_MBOX1_PEER_END,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name = "mbox_local",
-		.start = U5500_MBOX1_LOCAL_START,
-		.end = U5500_MBOX1_LOCAL_END,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name = "mbox_irq",
-		.start = MBOX_PAIR1_VIRT_IRQ,
-		.end = MBOX_PAIR1_VIRT_IRQ,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static struct resource mbox2_resources[] = {
-	{
-		.name = "mbox_peer",
-		.start = U5500_MBOX2_PEER_START,
-		.end = U5500_MBOX2_PEER_END,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name = "mbox_local",
-		.start = U5500_MBOX2_LOCAL_START,
-		.end = U5500_MBOX2_LOCAL_END,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name = "mbox_irq",
-		.start = MBOX_PAIR2_VIRT_IRQ,
-		.end = MBOX_PAIR2_VIRT_IRQ,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device mbox0_device = {
-	.id = 0,
-	.name = "mbox",
-	.resource = mbox0_resources,
-	.num_resources = ARRAY_SIZE(mbox0_resources),
-};
-
-static struct platform_device mbox1_device = {
-	.id = 1,
-	.name = "mbox",
-	.resource = mbox1_resources,
-	.num_resources = ARRAY_SIZE(mbox1_resources),
-};
-
-static struct platform_device mbox2_device = {
-	.id = 2,
-	.name = "mbox",
-	.resource = mbox2_resources,
-	.num_resources = ARRAY_SIZE(mbox2_resources),
-};
-
-static struct platform_device *db5500_platform_devs[] __initdata = {
-	&mbox0_device,
-	&mbox1_device,
-	&mbox2_device,
-};
-
-static resource_size_t __initdata db5500_gpio_base[] = {
-	U5500_GPIOBANK0_BASE,
-	U5500_GPIOBANK1_BASE,
-	U5500_GPIOBANK2_BASE,
-	U5500_GPIOBANK3_BASE,
-	U5500_GPIOBANK4_BASE,
-	U5500_GPIOBANK5_BASE,
-	U5500_GPIOBANK6_BASE,
-	U5500_GPIOBANK7_BASE,
-};
-
-static void __init db5500_add_gpios(struct device *parent)
-{
-	struct nmk_gpio_platform_data pdata = {
-		/* No custom data yet */
-	};
-
-	dbx500_add_gpios(parent, ARRAY_AND_SIZE(db5500_gpio_base),
-			 IRQ_DB5500_GPIO0, &pdata);
-}
-
-void __init u5500_map_io(void)
-{
-	/*
-	 * Map the UARTs early so that the DEBUG_LL stuff continues to work.
-	 */
-	iotable_init(u5500_uart_io_desc, ARRAY_SIZE(u5500_uart_io_desc));
-
-	ux500_map_io();
-
-	iotable_init(u5500_io_desc, ARRAY_SIZE(u5500_io_desc));
-
-	_PRCMU_BASE = __io_address(U5500_PRCMU_BASE);
-}
-
-static void __init db5500_pmu_init(void)
-{
-	struct resource res[] = {
-		[0] = {
-			.start		= IRQ_DB5500_PMU0,
-			.end		= IRQ_DB5500_PMU0,
-			.flags		= IORESOURCE_IRQ,
-		},
-		[1] = {
-			.start		= IRQ_DB5500_PMU1,
-			.end		= IRQ_DB5500_PMU1,
-			.flags		= IORESOURCE_IRQ,
-		},
-	};
-
-	platform_device_register_simple("arm-pmu", ARM_PMU_DEVICE_CPU,
-					res, ARRAY_SIZE(res));
-}
-
-static int usb_db5500_rx_dma_cfg[] = {
-	DB5500_DMA_DEV4_USB_OTG_IEP_1_9,
-	DB5500_DMA_DEV5_USB_OTG_IEP_2_10,
-	DB5500_DMA_DEV6_USB_OTG_IEP_3_11,
-	DB5500_DMA_DEV20_USB_OTG_IEP_4_12,
-	DB5500_DMA_DEV21_USB_OTG_IEP_5_13,
-	DB5500_DMA_DEV22_USB_OTG_IEP_6_14,
-	DB5500_DMA_DEV23_USB_OTG_IEP_7_15,
-	DB5500_DMA_DEV38_USB_OTG_IEP_8
-};
-
-static int usb_db5500_tx_dma_cfg[] = {
-	DB5500_DMA_DEV4_USB_OTG_OEP_1_9,
-	DB5500_DMA_DEV5_USB_OTG_OEP_2_10,
-	DB5500_DMA_DEV6_USB_OTG_OEP_3_11,
-	DB5500_DMA_DEV20_USB_OTG_OEP_4_12,
-	DB5500_DMA_DEV21_USB_OTG_OEP_5_13,
-	DB5500_DMA_DEV22_USB_OTG_OEP_6_14,
-	DB5500_DMA_DEV23_USB_OTG_OEP_7_15,
-	DB5500_DMA_DEV38_USB_OTG_OEP_8
-};
-
-static const char *db5500_read_soc_id(void)
-{
-	return kasprintf(GFP_KERNEL, "u5500 currently unsupported\n");
-}
-
-static struct device * __init db5500_soc_device_init(void)
-{
-	const char *soc_id = db5500_read_soc_id();
-
-	return ux500_soc_device_init(soc_id);
-}
-
-struct device * __init u5500_init_devices(void)
-{
-	struct device *parent;
-	int i;
-
-	parent = db5500_soc_device_init();
-
-	db5500_add_gpios(parent);
-	db5500_pmu_init();
-	db5500_dma_init(parent);
-	db5500_add_rtc(parent);
-	db5500_add_usb(parent, usb_db5500_rx_dma_cfg, usb_db5500_tx_dma_cfg);
-
-	for (i = 0; i < ARRAY_SIZE(db5500_platform_devs); i++)
-		db5500_platform_devs[i]->dev.parent = parent;
-
-	platform_add_devices(db5500_platform_devs,
-			     ARRAY_SIZE(db5500_platform_devs));
-
-	return parent;
-}
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 9bd8163896cf..33275eb4c689 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -34,8 +34,8 @@ static struct map_desc u8500_uart_io_desc[] __initdata = {
 	__IO_DEV_DESC(U8500_UART0_BASE, SZ_4K),
 	__IO_DEV_DESC(U8500_UART2_BASE, SZ_4K),
 };
-
-static struct map_desc u8500_io_desc[] __initdata = {
+/*  U8500 and U9540 common io_desc */
+static struct map_desc u8500_common_io_desc[] __initdata = {
 	/* SCU base also covers GIC CPU BASE and TWD with its 4K page */
 	__IO_DEV_DESC(U8500_SCU_BASE, SZ_4K),
 	__IO_DEV_DESC(U8500_GIC_DIST_BASE, SZ_4K),
@@ -49,12 +49,23 @@ static struct map_desc u8500_io_desc[] __initdata = {
 	__IO_DEV_DESC(U8500_CLKRST5_BASE, SZ_4K),
 	__IO_DEV_DESC(U8500_CLKRST6_BASE, SZ_4K),
 
-	__IO_DEV_DESC(U8500_PRCMU_BASE, SZ_4K),
 	__IO_DEV_DESC(U8500_GPIO0_BASE, SZ_4K),
 	__IO_DEV_DESC(U8500_GPIO1_BASE, SZ_4K),
 	__IO_DEV_DESC(U8500_GPIO2_BASE, SZ_4K),
 	__IO_DEV_DESC(U8500_GPIO3_BASE, SZ_4K),
+};
+
+/* U8500 IO map specific description */
+static struct map_desc u8500_io_desc[] __initdata = {
+	__IO_DEV_DESC(U8500_PRCMU_BASE, SZ_4K),
 	__IO_DEV_DESC(U8500_PRCMU_TCDM_BASE, SZ_4K),
+
+};
+
+/* U9540 IO map specific description */
+static struct map_desc u9540_io_desc[] __initdata = {
+	__IO_DEV_DESC(U8500_PRCMU_BASE, SZ_4K + SZ_8K),
+	__IO_DEV_DESC(U8500_PRCMU_TCDM_BASE, SZ_4K + SZ_8K),
 };
 
 void __init u8500_map_io(void)
@@ -66,7 +77,12 @@ void __init u8500_map_io(void)
 
 	ux500_map_io();
 
-	iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc));
+	iotable_init(u8500_common_io_desc, ARRAY_SIZE(u8500_common_io_desc));
+
+	if (cpu_is_u9540())
+		iotable_init(u9540_io_desc, ARRAY_SIZE(u9540_io_desc));
+	else
+		iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc));
 
 	_PRCMU_BASE = __io_address(U8500_PRCMU_BASE);
 }
@@ -121,6 +137,11 @@ static struct platform_device *platform_devs[] __initdata = {
 	&db8500_prcmu_device,
 };
 
+static struct platform_device *of_platform_devs[] __initdata = {
+	&u8500_dma40_device,
+	&db8500_pmu_device,
+};
+
 static resource_size_t __initdata db8500_gpio_base[] = {
 	U8500_GPIOBANK0_BASE,
 	U8500_GPIOBANK1_BASE,
@@ -141,6 +162,7 @@ static void __init db8500_add_gpios(struct device *parent)
 
 	dbx500_add_gpios(parent, ARRAY_AND_SIZE(db8500_gpio_base),
 			 IRQ_DB8500_GPIO0, &pdata);
+	dbx500_add_pinctrl(parent, "pinctrl-db8500");
 }
 
 static int usb_db8500_rx_dma_cfg[] = {
@@ -206,3 +228,31 @@ struct device * __init u8500_init_devices(void)
 
 	return parent;
 }
+
+/* TODO: Once all pieces are DT:ed, remove completely. */
+struct device * __init u8500_of_init_devices(void)
+{
+	struct device *parent;
+	int i;
+
+	parent = db8500_soc_device_init();
+
+	db8500_add_rtc(parent);
+	db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg);
+
+	platform_device_register_data(parent,
+		"cpufreq-u8500", -1, NULL, 0);
+
+	for (i = 0; i < ARRAY_SIZE(of_platform_devs); i++)
+		of_platform_devs[i]->dev.parent = parent;
+
+	/*
+	 * Devices to be DT:ed:
+	 *   u8500_dma40_device  = todo
+	 *   db8500_pmu_device   = todo
+	 *   db8500_prcmu_device = done
+	 */
+	platform_add_devices(of_platform_devs, ARRAY_SIZE(of_platform_devs));
+
+	return parent;
+}
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index d11f3892a27d..e2360e7c770d 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -10,7 +10,6 @@
 #include <linux/io.h>
 #include <linux/clk.h>
 #include <linux/mfd/db8500-prcmu.h>
-#include <linux/mfd/db5500-prcmu.h>
 #include <linux/clksrc-dbx500-prcmu.h>
 #include <linux/sys_soc.h>
 #include <linux/err.h>
@@ -30,6 +29,18 @@
 
 void __iomem *_PRCMU_BASE;
 
+/*
+ * FIXME: Should we set up the GPIO domain here?
+ *
+ * The problem is that we cannot put the interrupt resources into the platform
+ * device until the irqdomain has been added. Right now, we set the GIC interrupt
+ * domain from init_irq(), then load the gpio driver from
+ * core_initcall(nmk_gpio_init) and add the platform devices from
+ * arch_initcall(customize_machine).
+ *
+ * This feels fragile because it depends on the gpio device getting probed
+ * _before_ any device uses the gpio interrupts.
+*/
 static const struct of_device_id ux500_dt_irq_match[] = {
 	{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
 	{},
@@ -40,10 +51,7 @@ void __init ux500_init_irq(void)
 	void __iomem *dist_base;
 	void __iomem *cpu_base;
 
-	if (cpu_is_u5500()) {
-		dist_base = __io_address(U5500_GIC_DIST_BASE);
-		cpu_base = __io_address(U5500_GIC_CPU_BASE);
-	} else if (cpu_is_u8500()) {
+	if (cpu_is_u8500_family()) {
 		dist_base = __io_address(U8500_GIC_DIST_BASE);
 		cpu_base = __io_address(U8500_GIC_CPU_BASE);
 	} else
@@ -60,13 +68,17 @@ void __init ux500_init_irq(void)
 	 * Init clocks here so that they are available for system timer
 	 * initialization.
 	 */
-	if (cpu_is_u5500())
-		db5500_prcmu_early_init();
-	if (cpu_is_u8500())
+	if (cpu_is_u8500_family())
 		db8500_prcmu_early_init();
 	clk_init();
 }
 
+void __init ux500_init_late(void)
+{
+	clk_debugfs_init();
+	clk_init_smp_twd_cpufreq();
+}
+
 static const char * __init ux500_get_machine(void)
 {
 	return kasprintf(GFP_KERNEL, "DB%4x", dbx500_partnumber());
diff --git a/arch/arm/mach-ux500/cpuidle.c b/arch/arm/mach-ux500/cpuidle.c
new file mode 100644
index 000000000000..b54884bd2549
--- /dev/null
+++ b/arch/arm/mach-ux500/cpuidle.c
@@ -0,0 +1,171 @@
+/*
+ * Copyright (c) 2012 Linaro : Daniel Lezcano <daniel.lezcano@linaro.org> (IBM)
+ *
+ * Based on the work of Rickard Andersson <rickard.andersson@stericsson.com>
+ * and Jonas Aaberg <jonas.aberg@stericsson.com>.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/cpuidle.h>
+#include <linux/clockchips.h>
+#include <linux/spinlock.h>
+#include <linux/atomic.h>
+#include <linux/smp.h>
+#include <linux/mfd/dbx500-prcmu.h>
+
+#include <asm/cpuidle.h>
+#include <asm/proc-fns.h>
+
+static atomic_t master = ATOMIC_INIT(0);
+static DEFINE_SPINLOCK(master_lock);
+static DEFINE_PER_CPU(struct cpuidle_device, ux500_cpuidle_device);
+
+static inline int ux500_enter_idle(struct cpuidle_device *dev,
+				   struct cpuidle_driver *drv, int index)
+{
+	int this_cpu = smp_processor_id();
+	bool recouple = false;
+
+	clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &this_cpu);
+
+	if (atomic_inc_return(&master) == num_online_cpus()) {
+
+		/* With this lock, we prevent the other cpu to exit and enter
+		 * this function again and become the master */
+		if (!spin_trylock(&master_lock))
+			goto wfi;
+
+		/* decouple the gic from the A9 cores */
+		if (prcmu_gic_decouple())
+			goto out;
+
+		/* If an error occur, we will have to recouple the gic
+		 * manually */
+		recouple = true;
+
+		/* At this state, as the gic is decoupled, if the other
+		 * cpu is in WFI, we have the guarantee it won't be wake
+		 * up, so we can safely go to retention */
+		if (!prcmu_is_cpu_in_wfi(this_cpu ? 0 : 1))
+			goto out;
+
+		/* The prcmu will be in charge of watching the interrupts
+		 * and wake up the cpus */
+		if (prcmu_copy_gic_settings())
+			goto out;
+
+		/* Check in the meantime an interrupt did
+		 * not occur on the gic ... */
+		if (prcmu_gic_pending_irq())
+			goto out;
+
+		/* ... and the prcmu */
+		if (prcmu_pending_irq())
+			goto out;
+
+		/* Go to the retention state, the prcmu will wait for the
+		 * cpu to go WFI and this is what happens after exiting this
+		 * 'master' critical section */
+		if (prcmu_set_power_state(PRCMU_AP_IDLE, true, true))
+			goto out;
+
+		/* When we switch to retention, the prcmu is in charge
+		 * of recoupling the gic automatically */
+		recouple = false;
+
+		spin_unlock(&master_lock);
+	}
+wfi:
+	cpu_do_idle();
+out:
+	atomic_dec(&master);
+
+	if (recouple) {
+		prcmu_gic_recouple();
+		spin_unlock(&master_lock);
+	}
+
+	clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &this_cpu);
+
+	return index;
+}
+
+static struct cpuidle_driver ux500_idle_driver = {
+	.name = "ux500_idle",
+	.owner = THIS_MODULE,
+	.en_core_tk_irqen = 1,
+	.states = {
+		ARM_CPUIDLE_WFI_STATE,
+		{
+			.enter		  = ux500_enter_idle,
+			.exit_latency	  = 70,
+			.target_residency = 260,
+			.flags		  = CPUIDLE_FLAG_TIME_VALID,
+			.name		  = "ApIdle",
+			.desc		  = "ARM Retention",
+		},
+	},
+	.safe_state_index = 0,
+	.state_count = 2,
+};
+
+/*
+ * For each cpu, setup the broadcast timer because we will
+ * need to migrate the timers for the states >= ApIdle.
+ */
+static void ux500_setup_broadcast_timer(void *arg)
+{
+	int cpu = smp_processor_id();
+	clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ON, &cpu);
+}
+
+int __init ux500_idle_init(void)
+{
+	int ret, cpu;
+	struct cpuidle_device *device;
+
+        /* Configure wake up reasons */
+	prcmu_enable_wakeups(PRCMU_WAKEUP(ARM) | PRCMU_WAKEUP(RTC) |
+			     PRCMU_WAKEUP(ABB));
+
+	/*
+	 * Configure the timer broadcast for each cpu, that must
+	 * be done from the cpu context, so we use a smp cross
+	 * call with 'on_each_cpu'.
+	 */
+	on_each_cpu(ux500_setup_broadcast_timer, NULL, 1);
+
+	ret = cpuidle_register_driver(&ux500_idle_driver);
+	if (ret) {
+		printk(KERN_ERR "failed to register ux500 idle driver\n");
+		return ret;
+	}
+
+	for_each_online_cpu(cpu) {
+		device = &per_cpu(ux500_cpuidle_device, cpu);
+		device->cpu = cpu;
+		ret = cpuidle_register_device(device);
+		if (ret) {
+			printk(KERN_ERR "Failed to register cpuidle "
+			       "device for cpu%d\n", cpu);
+			goto out_unregister;
+		}
+	}
+out:
+	return ret;
+
+out_unregister:
+	for_each_online_cpu(cpu) {
+		device = &per_cpu(ux500_cpuidle_device, cpu);
+		cpuidle_unregister_device(device);
+	}
+
+	cpuidle_unregister_driver(&ux500_idle_driver);
+	goto out;
+}
+
+device_initcall(ux500_idle_init);
diff --git a/arch/arm/mach-ux500/devices-common.c b/arch/arm/mach-ux500/devices-common.c
index c5312a4b49f5..dfdd4a54668d 100644
--- a/arch/arm/mach-ux500/devices-common.c
+++ b/arch/arm/mach-ux500/devices-common.c
@@ -11,7 +11,6 @@
 #include <linux/irq.h>
 #include <linux/slab.h>
 #include <linux/platform_device.h>
-#include <linux/amba/bus.h>
 
 #include <plat/gpio-nomadik.h>
 
@@ -19,38 +18,6 @@
 
 #include "devices-common.h"
 
-struct amba_device *
-dbx500_add_amba_device(struct device *parent, const char *name,
-		       resource_size_t base, int irq, void *pdata,
-		       unsigned int periphid)
-{
-	struct amba_device *dev;
-	int ret;
-
-	dev = amba_device_alloc(name, base, SZ_4K);
-	if (!dev)
-		return ERR_PTR(-ENOMEM);
-
-	dev->dma_mask = DMA_BIT_MASK(32);
-	dev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
-
-	dev->irq[0] = irq;
-
-	dev->periphid = periphid;
-
-	dev->dev.platform_data = pdata;
-
-	dev->dev.parent = parent;
-
-	ret = amba_device_add(dev, &iomem_resource);
-	if (ret) {
-		amba_device_put(dev);
-		return ERR_PTR(ret);
-	}
-
-	return dev;
-}
-
 static struct platform_device *
 dbx500_add_gpio(struct device *parent, int id, resource_size_t addr, int irq,
 		struct nmk_gpio_platform_data *pdata)
diff --git a/arch/arm/mach-ux500/devices-common.h b/arch/arm/mach-ux500/devices-common.h
index 39c74ec82add..6e4706560266 100644
--- a/arch/arm/mach-ux500/devices-common.h
+++ b/arch/arm/mach-ux500/devices-common.h
@@ -11,12 +11,9 @@
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/sys_soc.h>
+#include <linux/amba/bus.h>
 #include <plat/i2c.h>
-
-extern struct amba_device *
-dbx500_add_amba_device(struct device *parent, const char *name,
-		       resource_size_t base, int irq, void *pdata,
-		       unsigned int periphid);
+#include <mach/crypto-ux500.h>
 
 struct spi_master_cntlr;
 
@@ -25,8 +22,8 @@ dbx500_add_msp_spi(struct device *parent, const char *name,
 		   resource_size_t base, int irq,
 		   struct spi_master_cntlr *pdata)
 {
-	return dbx500_add_amba_device(parent, name, base, irq,
-				      pdata, 0);
+	return amba_ahb_device_add(parent, name, base, SZ_4K, irq, 0,
+				   pdata, 0);
 }
 
 static inline struct amba_device *
@@ -34,8 +31,8 @@ dbx500_add_spi(struct device *parent, const char *name, resource_size_t base,
 	       int irq, struct spi_master_cntlr *pdata,
 	       u32 periphid)
 {
-	return dbx500_add_amba_device(parent, name, base, irq,
-				      pdata, periphid);
+	return amba_ahb_device_add(parent, name, base, SZ_4K, irq, 0,
+				   pdata, periphid);
 }
 
 struct mmci_platform_data;
@@ -44,8 +41,8 @@ static inline struct amba_device *
 dbx500_add_sdi(struct device *parent, const char *name, resource_size_t base,
 	       int irq, struct mmci_platform_data *pdata, u32 periphid)
 {
-	return dbx500_add_amba_device(parent, name, base, irq,
-				      pdata, periphid);
+	return amba_ahb_device_add(parent, name, base, SZ_4K, irq, 0,
+				   pdata, periphid);
 }
 
 struct amba_pl011_data;
@@ -54,7 +51,7 @@ static inline struct amba_device *
 dbx500_add_uart(struct device *parent, const char *name, resource_size_t base,
 		int irq, struct amba_pl011_data *pdata)
 {
-	return dbx500_add_amba_device(parent, name, base, irq, pdata, 0);
+	return amba_ahb_device_add(parent, name, base, SZ_4K, irq, 0, pdata, 0);
 }
 
 struct nmk_i2c_controller;
@@ -85,7 +82,57 @@ dbx500_add_i2c(struct device *parent, int id, resource_size_t base, int irq,
 static inline struct amba_device *
 dbx500_add_rtc(struct device *parent, resource_size_t base, int irq)
 {
-	return dbx500_add_amba_device(parent, "rtc-pl031", base, irq, NULL, 0);
+	return amba_apb_device_add(parent, "rtc-pl031", base, SZ_4K, irq,
+				0, NULL, 0);
+}
+
+struct cryp_platform_data;
+
+static inline struct platform_device *
+dbx500_add_cryp1(struct device *parent, int id, resource_size_t base, int irq,
+		struct cryp_platform_data *pdata)
+{
+	struct resource res[] = {
+			DEFINE_RES_MEM(base, SZ_4K),
+			DEFINE_RES_IRQ(irq),
+	};
+
+	struct platform_device_info pdevinfo = {
+			.parent = parent,
+			.name = "cryp1",
+			.id = id,
+			.res = res,
+			.num_res = ARRAY_SIZE(res),
+			.data = pdata,
+			.size_data = sizeof(*pdata),
+			.dma_mask = DMA_BIT_MASK(32),
+	};
+
+	return platform_device_register_full(&pdevinfo);
+}
+
+struct hash_platform_data;
+
+static inline struct platform_device *
+dbx500_add_hash1(struct device *parent, int id, resource_size_t base,
+		struct hash_platform_data *pdata)
+{
+	struct resource res[] = {
+			DEFINE_RES_MEM(base, SZ_4K),
+	};
+
+	struct platform_device_info pdevinfo = {
+			.parent = parent,
+			.name = "hash1",
+			.id = id,
+			.res = res,
+			.num_res = ARRAY_SIZE(res),
+			.data = pdata,
+			.size_data = sizeof(*pdata),
+			.dma_mask = DMA_BIT_MASK(32),
+	};
+
+	return platform_device_register_full(&pdevinfo);
 }
 
 struct nmk_gpio_platform_data;
@@ -93,4 +140,16 @@ struct nmk_gpio_platform_data;
 void dbx500_add_gpios(struct device *parent, resource_size_t *base, int num,
 		      int irq, struct nmk_gpio_platform_data *pdata);
 
+static inline void
+dbx500_add_pinctrl(struct device *parent, const char *name)
+{
+	struct platform_device_info pdevinfo = {
+		.parent = parent,
+		.name = name,
+		.id = -1,
+	};
+
+	platform_device_register_full(&pdevinfo);
+}
+
 #endif
diff --git a/arch/arm/mach-ux500/devices-db5500.h b/arch/arm/mach-ux500/devices-db5500.h
deleted file mode 100644
index e70955502c35..000000000000
--- a/arch/arm/mach-ux500/devices-db5500.h
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL), version 2.
- */
-
-#ifndef __DEVICES_DB5500_H
-#define __DEVICES_DB5500_H
-
-#include "devices-common.h"
-
-#define db5500_add_i2c1(parent, pdata) \
-	dbx500_add_i2c(parent, 1, U5500_I2C1_BASE, IRQ_DB5500_I2C1, pdata)
-#define db5500_add_i2c2(parent, pdata) \
-	dbx500_add_i2c(parent, 2, U5500_I2C2_BASE, IRQ_DB5500_I2C2, pdata)
-#define db5500_add_i2c3(parent, pdata) \
-	dbx500_add_i2c(parent, 3, U5500_I2C3_BASE, IRQ_DB5500_I2C3, pdata)
-
-#define db5500_add_msp0_spi(parent, pdata) \
-	dbx500_add_msp_spi(parent, "msp0", U5500_MSP0_BASE, \
-			   IRQ_DB5500_MSP0, pdata)
-#define db5500_add_msp1_spi(parent, pdata) \
-	dbx500_add_msp_spi(parent, "msp1", U5500_MSP1_BASE, \
-			   IRQ_DB5500_MSP1, pdata)
-#define db5500_add_msp2_spi(parent, pdata) \
-	dbx500_add_msp_spi(parent, "msp2", U5500_MSP2_BASE, \
-			   IRQ_DB5500_MSP2, pdata)
-
-#define db5500_add_msp0_spi(parent, pdata) \
-	dbx500_add_msp_spi(parent, "msp0", U5500_MSP0_BASE, \
-			  IRQ_DB5500_MSP0, pdata)
-#define db5500_add_msp1_spi(parent, pdata) \
-	dbx500_add_msp_spi(parent, "msp1", U5500_MSP1_BASE, \
-			  IRQ_DB5500_MSP1, pdata)
-#define db5500_add_msp2_spi(parent, pdata) \
-	dbx500_add_msp_spi(parent, "msp2", U5500_MSP2_BASE, \
-			  IRQ_DB5500_MSP2, pdata)
-
-#define db5500_add_rtc(parent) \
-	dbx500_add_rtc(parent, U5500_RTC_BASE, IRQ_DB5500_RTC);
-
-#define db5500_add_usb(parent, rx_cfg, tx_cfg) \
-	ux500_add_usb(parent, U5500_USBOTG_BASE, \
-		      IRQ_DB5500_USBOTG, rx_cfg, tx_cfg)
-
-#define db5500_add_sdi0(parent, pdata) \
-	dbx500_add_sdi(parent, "sdi0", U5500_SDI0_BASE, \
-		       IRQ_DB5500_SDMMC0, pdata,	\
-		       0x10480180)
-#define db5500_add_sdi1(parent, pdata) \
-	dbx500_add_sdi(parent, "sdi1", U5500_SDI1_BASE, \
-		       IRQ_DB5500_SDMMC1, pdata,	\
-		       0x10480180)
-#define db5500_add_sdi2(parent, pdata) \
-	dbx500_add_sdi(parent, "sdi2", U5500_SDI2_BASE, \
-		       IRQ_DB5500_SDMMC2, pdata		\
-		       0x10480180)
-#define db5500_add_sdi3(parent, pdata) \
-	dbx500_add_sdi(parent, "sdi3", U5500_SDI3_BASE, \
-		       IRQ_DB5500_SDMMC3, pdata		\
-		       0x10480180)
-#define db5500_add_sdi4(parent, pdata) \
-	dbx500_add_sdi(parent, "sdi4", U5500_SDI4_BASE, \
-		       IRQ_DB5500_SDMMC4, pdata		\
-		       0x10480180)
-
-/* This one has a bad peripheral ID in the U5500 silicon */
-#define db5500_add_spi0(parent, pdata) \
-	dbx500_add_spi(parent, "spi0", U5500_SPI0_BASE, \
-		       IRQ_DB5500_SPI0, pdata,		\
-		       0x10080023)
-#define db5500_add_spi1(parent, pdata) \
-	dbx500_add_spi(parent, "spi1", U5500_SPI1_BASE, \
-		       IRQ_DB5500_SPI1, pdata,		\
-		       0x10080023)
-#define db5500_add_spi2(parent, pdata) \
-	dbx500_add_spi(parent, "spi2", U5500_SPI2_BASE, \
-		       IRQ_DB5500_SPI2, pdata		\
-		       0x10080023)
-#define db5500_add_spi3(parent, pdata) \
-	dbx500_add_spi(parent, "spi3", U5500_SPI3_BASE, \
-		       IRQ_DB5500_SPI3, pdata		\
-		       0x10080023)
-
-#define db5500_add_uart0(parent, plat) \
-	dbx500_add_uart(parent, "uart0", U5500_UART0_BASE, \
-			IRQ_DB5500_UART0, plat)
-#define db5500_add_uart1(parent, plat) \
-	dbx500_add_uart(parent, "uart1", U5500_UART1_BASE, \
-			IRQ_DB5500_UART1, plat)
-#define db5500_add_uart2(parent, plat) \
-	dbx500_add_uart(parent, "uart2", U5500_UART2_BASE, \
-			IRQ_DB5500_UART2, plat)
-#define db5500_add_uart3(parent, plat) \
-	dbx500_add_uart(parent, "uart3", U5500_UART3_BASE, \
-			IRQ_DB5500_UART3, plat)
-
-#endif
diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c
index 6e66d3777ed5..91754a8a0d49 100644
--- a/arch/arm/mach-ux500/devices-db8500.c
+++ b/arch/arm/mach-ux500/devices-db8500.c
@@ -104,6 +104,8 @@ static const dma_addr_t dma40_tx_map[DB8500_DMA_NR_DEV] = {
 	[DB8500_DMA_DEV14_MSP2_TX] = U8500_MSP2_BASE + MSP_TX_RX_REG_OFFSET,
 	[DB8500_DMA_DEV30_MSP1_TX] = U8500_MSP1_BASE + MSP_TX_RX_REG_OFFSET,
 	[DB8500_DMA_DEV31_MSP0_TX_SLIM0_CH0_TX] = U8500_MSP0_BASE + MSP_TX_RX_REG_OFFSET,
+	[DB8500_DMA_DEV48_CAC1_TX] = U8500_CRYP1_BASE + CRYP1_TX_REG_OFFSET,
+	[DB8500_DMA_DEV50_HAC1_TX] = U8500_HASH1_BASE + HASH1_TX_REG_OFFSET,
 };
 
 /* Mapping between source event lines and physical device address */
@@ -139,6 +141,7 @@ static const dma_addr_t dma40_rx_map[DB8500_DMA_NR_DEV] = {
 	[DB8500_DMA_DEV14_MSP2_RX] = U8500_MSP2_BASE + MSP_TX_RX_REG_OFFSET,
 	[DB8500_DMA_DEV30_MSP3_RX] = U8500_MSP3_BASE + MSP_TX_RX_REG_OFFSET,
 	[DB8500_DMA_DEV31_MSP0_RX_SLIM0_CH0_RX] = U8500_MSP0_BASE + MSP_TX_RX_REG_OFFSET,
+	[DB8500_DMA_DEV48_CAC1_RX] = U8500_CRYP1_BASE + CRYP1_RX_REG_OFFSET,
 };
 
 /* Reserved event lines for memcpy only */
diff --git a/arch/arm/mach-ux500/devices-db8500.h b/arch/arm/mach-ux500/devices-db8500.h
index 9fd93e9da529..3c8010f4fb3f 100644
--- a/arch/arm/mach-ux500/devices-db8500.h
+++ b/arch/arm/mach-ux500/devices-db8500.h
@@ -31,10 +31,9 @@ static inline struct amba_device *
 db8500_add_ssp(struct device *parent, const char *name, resource_size_t base,
 	       int irq, struct pl022_ssp_controller *pdata)
 {
-	return dbx500_add_amba_device(parent, name, base, irq, pdata, 0);
+	return amba_ahb_device_add(parent, name, base, SZ_4K, irq, 0, pdata, 0);
 }
 
-
 #define db8500_add_i2c0(parent, pdata) \
 	dbx500_add_i2c(parent, 0, U8500_I2C0_BASE, IRQ_DB8500_I2C0, pdata)
 #define db8500_add_i2c1(parent, pdata) \
@@ -46,15 +45,6 @@ db8500_add_ssp(struct device *parent, const char *name, resource_size_t base,
 #define db8500_add_i2c4(parent, pdata) \
 	dbx500_add_i2c(parent, 4, U8500_I2C4_BASE, IRQ_DB8500_I2C4, pdata)
 
-#define db8500_add_msp0_i2s(parent, pdata) \
-	dbx500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0, pdata)
-#define db8500_add_msp1_i2s(parent, pdata) \
-	dbx500_add_msp_i2s(parent, 1, U8500_MSP1_BASE, IRQ_DB8500_MSP1, pdata)
-#define db8500_add_msp2_i2s(parent, pdata) \
-	dbx500_add_msp_i2s(parent, 2, U8500_MSP2_BASE, IRQ_DB8500_MSP2, pdata)
-#define db8500_add_msp3_i2s(parent, pdata) \
-	dbx500_add_msp_i2s(parent, 3, U8500_MSP3_BASE, IRQ_DB8500_MSP1, pdata)
-
 #define db8500_add_msp0_spi(parent, pdata) \
 	dbx500_add_msp_spi(parent, "msp0", U8500_MSP0_BASE, \
 			   IRQ_DB8500_MSP0, pdata)
@@ -124,4 +114,8 @@ db8500_add_ssp(struct device *parent, const char *name, resource_size_t base,
 	dbx500_add_uart(parent, "uart2", U8500_UART2_BASE, \
 			IRQ_DB8500_UART2, pdata)
 
+#define db8500_add_cryp1(parent, pdata) \
+	dbx500_add_cryp1(parent, -1, U8500_CRYP1_BASE, IRQ_DB8500_CRYP1, pdata)
+#define db8500_add_hash1(parent, pdata) \
+	dbx500_add_hash1(parent, -1, U8500_HASH1_BASE, pdata)
 #endif
diff --git a/arch/arm/mach-ux500/dma-db5500.c b/arch/arm/mach-ux500/dma-db5500.c
deleted file mode 100644
index 41e9470fa0e6..000000000000
--- a/arch/arm/mach-ux500/dma-db5500.c
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Per Forlin <per.forlin@stericsson.com> for ST-Ericsson
- * Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson
- * Author: Rabin Vincent <rabinv.vincent@stericsson.com> for ST-Ericsson
- *
- * License terms: GNU General Public License (GPL), version 2
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-
-#include <plat/ste_dma40.h>
-#include <mach/setup.h>
-#include <mach/hardware.h>
-
-#include "ste-dma40-db5500.h"
-
-static struct resource dma40_resources[] = {
-	[0] = {
-		.start = U5500_DMA_BASE,
-		.end   = U5500_DMA_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-		.name  = "base",
-	},
-	[1] = {
-		.start = U5500_DMA_LCPA_BASE,
-		.end   = U5500_DMA_LCPA_BASE + 2 * SZ_1K - 1,
-		.flags = IORESOURCE_MEM,
-		.name  = "lcpa",
-	},
-	[2] = {
-		.start = IRQ_DB5500_DMA,
-		.end   = IRQ_DB5500_DMA,
-		.flags = IORESOURCE_IRQ
-	}
-};
-
-/* Default configuration for physical memcpy */
-static struct stedma40_chan_cfg dma40_memcpy_conf_phy = {
-	.mode = STEDMA40_MODE_PHYSICAL,
-	.dir = STEDMA40_MEM_TO_MEM,
-
-	.src_info.data_width = STEDMA40_BYTE_WIDTH,
-	.src_info.psize = STEDMA40_PSIZE_PHY_1,
-	.src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
-
-	.dst_info.data_width = STEDMA40_BYTE_WIDTH,
-	.dst_info.psize = STEDMA40_PSIZE_PHY_1,
-	.dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
-};
-
-/* Default configuration for logical memcpy */
-static struct stedma40_chan_cfg dma40_memcpy_conf_log = {
-	.dir = STEDMA40_MEM_TO_MEM,
-
-	.src_info.data_width = STEDMA40_BYTE_WIDTH,
-	.src_info.psize = STEDMA40_PSIZE_LOG_1,
-	.src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
-
-	.dst_info.data_width = STEDMA40_BYTE_WIDTH,
-	.dst_info.psize = STEDMA40_PSIZE_LOG_1,
-	.dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
-};
-
-/*
- * Mapping between soruce event lines and physical device address This was
- * created assuming that the event line is tied to a device and therefore the
- * address is constant, however this is not true for at least USB, and the
- * values are just placeholders for USB.  This table is preserved and used for
- * now.
- */
-static const dma_addr_t dma40_rx_map[DB5500_DMA_NR_DEV] = {
-	[DB5500_DMA_DEV24_SDMMC0_RX] = -1,
-	[DB5500_DMA_DEV38_USB_OTG_IEP_8] = -1,
-	[DB5500_DMA_DEV23_USB_OTG_IEP_7_15] = -1,
-	[DB5500_DMA_DEV22_USB_OTG_IEP_6_14] = -1,
-	[DB5500_DMA_DEV21_USB_OTG_IEP_5_13] = -1,
-	[DB5500_DMA_DEV20_USB_OTG_IEP_4_12] = -1,
-	[DB5500_DMA_DEV6_USB_OTG_IEP_3_11] = -1,
-	[DB5500_DMA_DEV5_USB_OTG_IEP_2_10] = -1,
-	[DB5500_DMA_DEV4_USB_OTG_IEP_1_9] = -1,
-};
-
-/* Mapping between destination event lines and physical device address */
-static const dma_addr_t dma40_tx_map[DB5500_DMA_NR_DEV] = {
-	[DB5500_DMA_DEV24_SDMMC0_TX] = -1,
-	[DB5500_DMA_DEV38_USB_OTG_OEP_8] = -1,
-	[DB5500_DMA_DEV23_USB_OTG_OEP_7_15] = -1,
-	[DB5500_DMA_DEV22_USB_OTG_OEP_6_14] = -1,
-	[DB5500_DMA_DEV21_USB_OTG_OEP_5_13] = -1,
-	[DB5500_DMA_DEV20_USB_OTG_OEP_4_12] = -1,
-	[DB5500_DMA_DEV6_USB_OTG_OEP_3_11] = -1,
-	[DB5500_DMA_DEV5_USB_OTG_OEP_2_10] = -1,
-	[DB5500_DMA_DEV4_USB_OTG_OEP_1_9] = -1,
-};
-
-static int dma40_memcpy_event[] = {
-	DB5500_DMA_MEMCPY_TX_1,
-	DB5500_DMA_MEMCPY_TX_2,
-	DB5500_DMA_MEMCPY_TX_3,
-	DB5500_DMA_MEMCPY_TX_4,
-	DB5500_DMA_MEMCPY_TX_5,
-};
-
-static struct stedma40_platform_data dma40_plat_data = {
-	.dev_len		= ARRAY_SIZE(dma40_rx_map),
-	.dev_rx			= dma40_rx_map,
-	.dev_tx			= dma40_tx_map,
-	.memcpy			= dma40_memcpy_event,
-	.memcpy_len		= ARRAY_SIZE(dma40_memcpy_event),
-	.memcpy_conf_phy	= &dma40_memcpy_conf_phy,
-	.memcpy_conf_log	= &dma40_memcpy_conf_log,
-	.disabled_channels	= {-1},
-};
-
-static struct platform_device dma40_device = {
-	.dev = {
-		.platform_data = &dma40_plat_data,
-	},
-	.name		= "dma40",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(dma40_resources),
-	.resource	= dma40_resources
-};
-
-void __init db5500_dma_init(struct device *parent)
-{
-	int ret;
-
-	dma40_device.dev.parent = parent;
-	ret = platform_device_register(&dma40_device);
-	if (ret)
-		dev_err(&dma40_device.dev, "unable to register device: %d\n", ret);
-
-}
diff --git a/arch/arm/mach-ux500/id.c b/arch/arm/mach-ux500/id.c
index 15a0f63b2e2b..d1579920139f 100644
--- a/arch/arm/mach-ux500/id.c
+++ b/arch/arm/mach-ux500/id.c
@@ -23,7 +23,7 @@ static unsigned int ux500_read_asicid(phys_addr_t addr)
 {
 	phys_addr_t base = addr & ~0xfff;
 	struct map_desc desc = {
-		.virtual	= IO_ADDRESS(base),
+		.virtual	= UX500_VIRT_ROM,
 		.pfn		= __phys_to_pfn(base),
 		.length		= SZ_16K,
 		.type		= MT_DEVICE,
@@ -35,7 +35,7 @@ static unsigned int ux500_read_asicid(phys_addr_t addr)
 	local_flush_tlb_all();
 	flush_cache_all();
 
-	return readl(__io_address(addr));
+	return readl(IOMEM(UX500_VIRT_ROM + (addr & 0xfff)));
 }
 
 static void ux500_print_soc_info(unsigned int asicid)
@@ -67,6 +67,7 @@ static unsigned int partnumber(unsigned int asicid)
  * DB8500v2	0x412fc091	0x9001DBF4		0x008500B0
  * DB8520v2.2	0x412fc091	0x9001DBF4		0x008500B2
  * DB5500v1	0x412fc091	0x9001FFF4		0x005500A0
+ * DB9540	0x413fc090	0xFFFFDBF4		0x009540xx
  */
 
 void __init ux500_map_io(void)
@@ -91,6 +92,10 @@ void __init ux500_map_io(void)
 		/* DB5500v1 */
 		addr = 0x9001FFF4;
 		break;
+
+	case 0x413fc090: /* DB9540 */
+		addr = 0xFFFFDBF4;
+		break;
 	}
 
 	if (addr)
diff --git a/arch/arm/mach-ux500/include/mach/crypto-ux500.h b/arch/arm/mach-ux500/include/mach/crypto-ux500.h
new file mode 100644
index 000000000000..5b2d0817e26a
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/crypto-ux500.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2011
+ *
+ * Author: Joakim Bech <joakim.xx.bech@stericsson.com> for ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ */
+#ifndef _CRYPTO_UX500_H
+#define _CRYPTO_UX500_H
+#include <linux/dmaengine.h>
+#include <plat/ste_dma40.h>
+
+struct hash_platform_data {
+	void *mem_to_engine;
+	bool (*dma_filter)(struct dma_chan *chan, void *filter_param);
+};
+
+struct cryp_platform_data {
+	struct stedma40_chan_cfg mem_to_engine;
+	struct stedma40_chan_cfg engine_to_mem;
+};
+
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/db5500-regs.h b/arch/arm/mach-ux500/include/mach/db5500-regs.h
deleted file mode 100644
index 8e714bcb099f..000000000000
--- a/arch/arm/mach-ux500/include/mach/db5500-regs.h
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#ifndef __MACH_DB5500_REGS_H
-#define __MACH_DB5500_REGS_H
-
-#define U5500_PER1_BASE		0xA0020000
-#define U5500_PER2_BASE		0xA0010000
-#define U5500_PER3_BASE		0x80140000
-#define U5500_PER4_BASE		0x80150000
-#define U5500_PER5_BASE		0x80100000
-#define U5500_PER6_BASE		0x80120000
-
-#define U5500_GIC_DIST_BASE	0xA0411000
-#define U5500_GIC_CPU_BASE	0xA0410100
-#define U5500_DMA_BASE		0x90030000
-#define U5500_STM_BASE		0x90020000
-#define U5500_STM_REG_BASE	(U5500_STM_BASE + 0xF000)
-#define U5500_MCDE_BASE		0xA0400000
-#define U5500_MODEM_BASE	0xB0000000
-#define U5500_L2CC_BASE		0xA0412000
-#define U5500_SCU_BASE		0xA0410000
-#define U5500_DSI1_BASE		0xA0401000
-#define U5500_DSI2_BASE		0xA0402000
-#define U5500_SIA_BASE		0xA0100000
-#define U5500_SVA_BASE		0x80200000
-#define U5500_HSEM_BASE		0xA0000000
-#define U5500_NAND0_BASE	0x60000000
-#define U5500_NAND1_BASE	0x70000000
-#define U5500_TWD_BASE		0xa0410600
-#define U5500_ICN_BASE		0xA0040000
-#define U5500_B2R2_BASE		0xa0200000
-#define U5500_BOOT_ROM_BASE	0x90000000
-
-#define U5500_FSMC_BASE		(U5500_PER1_BASE + 0x0000)
-#define U5500_SDI0_BASE		(U5500_PER1_BASE + 0x1000)
-#define U5500_SDI2_BASE		(U5500_PER1_BASE + 0x2000)
-#define U5500_UART0_BASE	(U5500_PER1_BASE + 0x3000)
-#define U5500_I2C1_BASE		(U5500_PER1_BASE + 0x4000)
-#define U5500_MSP0_BASE		(U5500_PER1_BASE + 0x5000)
-#define U5500_GPIO0_BASE	(U5500_PER1_BASE + 0xE000)
-#define U5500_CLKRST1_BASE	(U5500_PER1_BASE + 0xF000)
-
-#define U5500_USBOTG_BASE	(U5500_PER2_BASE + 0x0000)
-#define U5500_GPIO1_BASE	(U5500_PER2_BASE + 0xE000)
-#define U5500_CLKRST2_BASE	(U5500_PER2_BASE + 0xF000)
-
-#define U5500_KEYPAD_BASE	(U5500_PER3_BASE + 0x0000)
-#define U5500_PWM_BASE		(U5500_PER3_BASE + 0x1000)
-#define U5500_GPIO3_BASE	(U5500_PER3_BASE + 0xE000)
-#define U5500_CLKRST3_BASE	(U5500_PER3_BASE + 0xF000)
-
-#define U5500_BACKUPRAM0_BASE	(U5500_PER4_BASE + 0x0000)
-#define U5500_BACKUPRAM1_BASE	(U5500_PER4_BASE + 0x1000)
-#define U5500_RTT0_BASE		(U5500_PER4_BASE + 0x2000)
-#define U5500_RTT1_BASE		(U5500_PER4_BASE + 0x3000)
-#define U5500_RTC_BASE		(U5500_PER4_BASE + 0x4000)
-#define U5500_SCR_BASE		(U5500_PER4_BASE + 0x5000)
-#define U5500_DMC_BASE		(U5500_PER4_BASE + 0x6000)
-#define U5500_PRCMU_BASE	(U5500_PER4_BASE + 0x7000)
-#define U5500_PRCMU_TIMER_3_BASE (U5500_PER4_BASE + 0x07338)
-#define U5500_PRCMU_TIMER_4_BASE (U5500_PER4_BASE + 0x07450)
-#define U5500_MSP1_BASE		(U5500_PER4_BASE + 0x9000)
-#define U5500_GPIO2_BASE	(U5500_PER4_BASE + 0xA000)
-#define U5500_MTIMER_BASE	(U5500_PER4_BASE + 0xC000)
-#define U5500_CDETECT_BASE	(U5500_PER4_BASE + 0xF000)
-#define U5500_PRCMU_TCDM_BASE	(U5500_PER4_BASE + 0x18000)
-#define U5500_PRCMU_TCPM_BASE	(U5500_PER4_BASE + 0x10000)
-#define U5500_TPIU_BASE		(U5500_PER4_BASE + 0x50000)
-
-#define U5500_SPI0_BASE		(U5500_PER5_BASE + 0x0000)
-#define U5500_SPI1_BASE		(U5500_PER5_BASE + 0x1000)
-#define U5500_SPI2_BASE		(U5500_PER5_BASE + 0x2000)
-#define U5500_SPI3_BASE		(U5500_PER5_BASE + 0x3000)
-#define U5500_UART1_BASE	(U5500_PER5_BASE + 0x4000)
-#define U5500_UART2_BASE	(U5500_PER5_BASE + 0x5000)
-#define U5500_UART3_BASE	(U5500_PER5_BASE + 0x6000)
-#define U5500_SDI1_BASE		(U5500_PER5_BASE + 0x7000)
-#define U5500_SDI3_BASE		(U5500_PER5_BASE + 0x8000)
-#define U5500_SDI4_BASE		(U5500_PER5_BASE + 0x9000)
-#define U5500_I2C2_BASE		(U5500_PER5_BASE + 0xA000)
-#define U5500_I2C3_BASE		(U5500_PER5_BASE + 0xB000)
-#define U5500_MSP2_BASE		(U5500_PER5_BASE + 0xC000)
-#define U5500_IRDA_BASE		(U5500_PER5_BASE + 0xD000)
-#define U5500_IRRC_BASE		(U5500_PER5_BASE + 0x10000)
-#define U5500_GPIO4_BASE	(U5500_PER5_BASE + 0x1E000)
-#define U5500_CLKRST5_BASE	(U5500_PER5_BASE + 0x1F000)
-
-#define U5500_RNG_BASE		(U5500_PER6_BASE + 0x0000)
-#define U5500_HASH0_BASE	(U5500_PER6_BASE + 0x1000)
-#define U5500_HASH1_BASE	(U5500_PER6_BASE + 0x2000)
-#define U5500_PKA_BASE		(U5500_PER6_BASE + 0x4000)
-#define U5500_PKAM_BASE		(U5500_PER6_BASE + 0x5100)
-#define U5500_MTU0_BASE		(U5500_PER6_BASE + 0x6000)
-#define U5500_MTU1_BASE		(U5500_PER6_BASE + 0x7000)
-#define U5500_CR_BASE		(U5500_PER6_BASE + 0x8000)
-#define U5500_CRYP0_BASE	(U5500_PER6_BASE + 0xA000)
-#define U5500_CRYP1_BASE	(U5500_PER6_BASE + 0xB000)
-#define U5500_CLKRST6_BASE	(U5500_PER6_BASE + 0xF000)
-
-#define U5500_GPIOBANK0_BASE	U5500_GPIO0_BASE
-#define U5500_GPIOBANK1_BASE	(U5500_GPIO0_BASE + 0x80)
-#define U5500_GPIOBANK2_BASE	U5500_GPIO1_BASE
-#define U5500_GPIOBANK3_BASE	U5500_GPIO2_BASE
-#define U5500_GPIOBANK4_BASE	U5500_GPIO3_BASE
-#define U5500_GPIOBANK5_BASE	U5500_GPIO4_BASE
-#define U5500_GPIOBANK6_BASE	(U5500_GPIO4_BASE + 0x80)
-#define U5500_GPIOBANK7_BASE	(U5500_GPIO4_BASE + 0x100)
-
-#define U5500_MBOX_BASE		(U5500_MODEM_BASE + 0xFFD1000)
-#define U5500_MBOX0_PEER_START	(U5500_MBOX_BASE + 0x40)
-#define U5500_MBOX0_PEER_END	(U5500_MBOX_BASE + 0x5F)
-#define U5500_MBOX0_LOCAL_START	(U5500_MBOX_BASE + 0x60)
-#define U5500_MBOX0_LOCAL_END	(U5500_MBOX_BASE + 0x7F)
-#define U5500_MBOX1_PEER_START	(U5500_MBOX_BASE + 0x80)
-#define U5500_MBOX1_PEER_END	(U5500_MBOX_BASE + 0x9F)
-#define U5500_MBOX1_LOCAL_START	(U5500_MBOX_BASE + 0xA0)
-#define U5500_MBOX1_LOCAL_END	(U5500_MBOX_BASE + 0xBF)
-#define U5500_MBOX2_PEER_START	(U5500_MBOX_BASE + 0x00)
-#define U5500_MBOX2_PEER_END	(U5500_MBOX_BASE + 0x1F)
-#define U5500_MBOX2_LOCAL_START	(U5500_MBOX_BASE + 0x20)
-#define U5500_MBOX2_LOCAL_END	(U5500_MBOX_BASE + 0x3F)
-
-#define U5500_ACCCON_BASE_SEC	(0xBFFF0000)
-#define U5500_ACCCON_BASE		(0xBFFF1000)
-#define U5500_ACCCON_CPUVEC_RESET_ADDR_OFFSET (0x00000020)
-#define U5500_ACCCON_ACC_CPU_CTRL_OFFSET (0x000000BC)
-#define U5500_INTCON_MBOX1_INT_RESET_ADDR	(0xBFFD31A4)
-
-#define U5500_ESRAM_BASE	        0x40000000
-#define U5500_ESRAM_DMA_LCPA_OFFSET	0x10000
-#define U5500_DMA_LCPA_BASE    (U5500_ESRAM_BASE + U5500_ESRAM_DMA_LCPA_OFFSET)
-
-#define U5500_MCDE_SIZE		0x1000
-#define U5500_DSI_LINK_SIZE	0x1000
-#define U5500_DSI_LINK_COUNT	0x2
-#define U5500_DSI_LINK1_BASE	(U5500_MCDE_BASE + U5500_MCDE_SIZE)
-#define U5500_DSI_LINK2_BASE	(U5500_DSI_LINK1_BASE + U5500_DSI_LINK_SIZE)
-
-#endif
diff --git a/arch/arm/mach-ux500/include/mach/db8500-regs.h b/arch/arm/mach-ux500/include/mach/db8500-regs.h
index 9ec20b96d8f2..1530d493879d 100644
--- a/arch/arm/mach-ux500/include/mach/db8500-regs.h
+++ b/arch/arm/mach-ux500/include/mach/db8500-regs.h
@@ -41,6 +41,10 @@
 /* ASIC ID is at 0xbf4 offset within this region */
 #define U8500_ASIC_ID_BASE	0x9001D000
 
+#define U9540_BOOT_ROM_BASE	0xFFFE0000
+/* ASIC ID is at 0xbf4 offset within this region */
+#define U9540_ASIC_ID_BASE	0xFFFFD000
+
 #define U8500_PER6_BASE		0xa03c0000
 #define U8500_PER7_BASE		0xa03d0000
 #define U8500_PER5_BASE		0xa03e0000
@@ -96,7 +100,9 @@
 #define U8500_SCR_BASE		(U8500_PER4_BASE + 0x05000)
 #define U8500_DMC_BASE		(U8500_PER4_BASE + 0x06000)
 #define U8500_PRCMU_BASE	(U8500_PER4_BASE + 0x07000)
+#define U9540_DMC1_BASE		(U8500_PER4_BASE + 0x0A000)
 #define U8500_PRCMU_TCDM_BASE	(U8500_PER4_BASE + 0x68000)
+#define U9540_PRCMU_TCDM_BASE	(U8500_PER4_BASE + 0x6A000)
 #define U8500_PRCMU_TCPM_BASE   (U8500_PER4_BASE + 0x60000)
 #define U8500_PRCMU_TIMER_3_BASE (U8500_PER4_BASE + 0x07338)
 #define U8500_PRCMU_TIMER_4_BASE (U8500_PER4_BASE + 0x07450)
diff --git a/arch/arm/mach-ux500/include/mach/debug-macro.S b/arch/arm/mach-ux500/include/mach/debug-macro.S
index 8d74d927d4e2..67035223334a 100644
--- a/arch/arm/mach-ux500/include/mach/debug-macro.S
+++ b/arch/arm/mach-ux500/include/mach/debug-macro.S
@@ -20,10 +20,6 @@
  * built, so that there's some hint during the build that something is wrong.
  */
 
-#ifdef CONFIG_UX500_SOC_DB5500
-#define __UX500_UART(n)	U5500_UART##n##_BASE
-#endif
-
 #ifdef CONFIG_UX500_SOC_DB8500
 #define __UX500_UART(n)	U8500_UART##n##_BASE
 #endif
diff --git a/arch/arm/mach-ux500/include/mach/devices.h b/arch/arm/mach-ux500/include/mach/devices.h
index 5f6cb71fc62d..cbc6f1e4104d 100644
--- a/arch/arm/mach-ux500/include/mach/devices.h
+++ b/arch/arm/mach-ux500/include/mach/devices.h
@@ -10,11 +10,13 @@
 struct platform_device;
 struct amba_device;
 
-extern struct platform_device u5500_gpio_devs[];
 extern struct platform_device u8500_gpio_devs[];
 
 extern struct amba_device ux500_pl031_device;
 
+extern struct platform_device ux500_hash1_device;
+extern struct platform_device ux500_cryp1_device;
+
 extern struct platform_device u8500_dma40_device;
 extern struct platform_device ux500_ske_keypad_device;
 
diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h
index f84698936d36..28d16e744bfd 100644
--- a/arch/arm/mach-ux500/include/mach/hardware.h
+++ b/arch/arm/mach-ux500/include/mach/hardware.h
@@ -17,6 +17,8 @@
  */
 #define U8500_IO_VIRTUAL	0xf0000000
 #define U8500_IO_PHYSICAL	0xa0000000
+/* This is where we map in the ROM to check ASIC IDs */
+#define UX500_VIRT_ROM		0xf0000000
 
 /* This macro is used in assembly, so no cast */
 #define IO_ADDRESS(x)           \
@@ -24,13 +26,16 @@
 
 /* typesafe io address */
 #define __io_address(n)		IOMEM(IO_ADDRESS(n))
+
 /* Used by some plat-nomadik code */
 #define io_p2v(n)		__io_address(n)
 
 #include <mach/db8500-regs.h>
-#include <mach/db5500-regs.h>
 
 #define MSP_TX_RX_REG_OFFSET	0
+#define CRYP1_RX_REG_OFFSET	0x10
+#define CRYP1_TX_REG_OFFSET	0x8
+#define HASH1_TX_REG_OFFSET	0x4
 
 #ifndef __ASSEMBLY__
 
diff --git a/arch/arm/mach-ux500/include/mach/id.h b/arch/arm/mach-ux500/include/mach/id.h
index 833d6a6edc9b..c6e2db9e9e51 100644
--- a/arch/arm/mach-ux500/include/mach/id.h
+++ b/arch/arm/mach-ux500/include/mach/id.h
@@ -41,6 +41,16 @@ static inline bool __attribute_const__ cpu_is_u8500(void)
 	return dbx500_partnumber() == 0x8500;
 }
 
+static inline bool __attribute_const__ cpu_is_u9540(void)
+{
+	return dbx500_partnumber() == 0x9540;
+}
+
+static inline bool cpu_is_u8500_family(void)
+{
+	return cpu_is_u8500() || cpu_is_u9540();
+}
+
 static inline bool __attribute_const__ cpu_is_u5500(void)
 {
 	return dbx500_partnumber() == 0x5500;
@@ -111,7 +121,12 @@ static inline bool cpu_is_u8500v21(void)
 
 static inline bool cpu_is_u8500v20_or_later(void)
 {
-	return cpu_is_u8500() && !cpu_is_u8500v10() && !cpu_is_u8500v11();
+	/*
+	 * U9540 has so much in common with U8500 that is is considered a
+	 * U8500 variant.
+	 */
+	return cpu_is_u9540() ||
+		(cpu_is_u8500() && !cpu_is_u8500v10() && !cpu_is_u8500v11());
 }
 
 static inline bool ux500_is_svp(void)
diff --git a/arch/arm/mach-ux500/include/mach/irqs-board-u5500.h b/arch/arm/mach-ux500/include/mach/irqs-board-u5500.h
deleted file mode 100644
index 29d972c7717b..000000000000
--- a/arch/arm/mach-ux500/include/mach/irqs-board-u5500.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#ifndef __MACH_IRQS_BOARD_U5500_H
-#define __MACH_IRQS_BOARD_U5500_H
-
-#define AB5500_NR_IRQS		5
-#define IRQ_AB5500_BASE		IRQ_BOARD_START
-#define IRQ_AB5500_END		(IRQ_AB5500_BASE + AB5500_NR_IRQS)
-
-#define U5500_IRQ_END		IRQ_AB5500_END
-
-#if IRQ_BOARD_END < U5500_IRQ_END
-#undef IRQ_BOARD_END
-#define IRQ_BOARD_END		U5500_IRQ_END
-#endif
-
-#endif
diff --git a/arch/arm/mach-ux500/include/mach/irqs-db5500.h b/arch/arm/mach-ux500/include/mach/irqs-db5500.h
deleted file mode 100644
index 77239776a6f2..000000000000
--- a/arch/arm/mach-ux500/include/mach/irqs-db5500.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com>
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#ifndef __MACH_IRQS_DB5500_H
-#define __MACH_IRQS_DB5500_H
-
-#define IRQ_DB5500_MTU0			(IRQ_SHPI_START + 4)
-#define IRQ_DB5500_SPI2			(IRQ_SHPI_START + 6)
-#define IRQ_DB5500_PMU0			(IRQ_SHPI_START + 7)
-#define IRQ_DB5500_SPI0			(IRQ_SHPI_START + 8)
-#define IRQ_DB5500_RTT			(IRQ_SHPI_START + 9)
-#define IRQ_DB5500_PKA			(IRQ_SHPI_START + 10)
-#define IRQ_DB5500_UART0		(IRQ_SHPI_START + 11)
-#define IRQ_DB5500_I2C3			(IRQ_SHPI_START + 12)
-#define IRQ_DB5500_L2CC			(IRQ_SHPI_START + 13)
-#define IRQ_DB5500_MSP0			(IRQ_SHPI_START + 14)
-#define IRQ_DB5500_CRYP1		(IRQ_SHPI_START + 15)
-#define IRQ_DB5500_PMU1			(IRQ_SHPI_START + 16)
-#define IRQ_DB5500_MTU1			(IRQ_SHPI_START + 17)
-#define IRQ_DB5500_RTC			(IRQ_SHPI_START + 18)
-#define IRQ_DB5500_UART1		(IRQ_SHPI_START + 19)
-#define IRQ_DB5500_USB_WAKEUP		(IRQ_SHPI_START + 20)
-#define IRQ_DB5500_I2C0			(IRQ_SHPI_START + 21)
-#define IRQ_DB5500_I2C1			(IRQ_SHPI_START + 22)
-#define IRQ_DB5500_USBOTG		(IRQ_SHPI_START + 23)
-#define IRQ_DB5500_DMA_SECURE		(IRQ_SHPI_START + 24)
-#define IRQ_DB5500_DMA			(IRQ_SHPI_START + 25)
-#define IRQ_DB5500_UART2		(IRQ_SHPI_START + 26)
-#define IRQ_DB5500_ICN_PMU1		(IRQ_SHPI_START + 27)
-#define IRQ_DB5500_ICN_PMU2		(IRQ_SHPI_START + 28)
-#define IRQ_DB5500_UART3		(IRQ_SHPI_START + 29)
-#define IRQ_DB5500_SPI3			(IRQ_SHPI_START + 30)
-#define IRQ_DB5500_SDMMC4		(IRQ_SHPI_START + 31)
-#define IRQ_DB5500_IRRC			(IRQ_SHPI_START + 33)
-#define IRQ_DB5500_IRDA_FT		(IRQ_SHPI_START + 34)
-#define IRQ_DB5500_IRDA_SD		(IRQ_SHPI_START + 35)
-#define IRQ_DB5500_IRDA_FI		(IRQ_SHPI_START + 36)
-#define IRQ_DB5500_IRDA_FD		(IRQ_SHPI_START + 37)
-#define IRQ_DB5500_FSMC_CODEREADY	(IRQ_SHPI_START + 38)
-#define IRQ_DB5500_FSMC_NANDWAIT	(IRQ_SHPI_START + 39)
-#define IRQ_DB5500_AB5500		(IRQ_SHPI_START + 40)
-#define IRQ_DB5500_SDMMC2		(IRQ_SHPI_START + 41)
-#define IRQ_DB5500_SIA			(IRQ_SHPI_START + 42)
-#define IRQ_DB5500_SIA2			(IRQ_SHPI_START + 43)
-#define IRQ_DB5500_HVA			(IRQ_SHPI_START + 44)
-#define IRQ_DB5500_HVA2			(IRQ_SHPI_START + 45)
-#define IRQ_DB5500_PRCMU0		(IRQ_SHPI_START + 46)
-#define IRQ_DB5500_PRCMU1		(IRQ_SHPI_START + 47)
-#define IRQ_DB5500_DISP			(IRQ_SHPI_START + 48)
-#define IRQ_DB5500_SDMMC1		(IRQ_SHPI_START + 50)
-#define IRQ_DB5500_MSP1			(IRQ_SHPI_START + 52)
-#define IRQ_DB5500_KBD			(IRQ_SHPI_START + 53)
-#define IRQ_DB5500_I2C2			(IRQ_SHPI_START + 55)
-#define IRQ_DB5500_B2R2			(IRQ_SHPI_START + 56)
-#define IRQ_DB5500_CRYP0		(IRQ_SHPI_START + 57)
-#define IRQ_DB5500_SDMMC3		(IRQ_SHPI_START + 59)
-#define IRQ_DB5500_SDMMC0		(IRQ_SHPI_START + 60)
-#define IRQ_DB5500_HSEM			(IRQ_SHPI_START + 61)
-#define IRQ_DB5500_SBAG			(IRQ_SHPI_START + 63)
-#define IRQ_DB5500_MODEM		(IRQ_SHPI_START + 65)
-#define IRQ_DB5500_SPI1			(IRQ_SHPI_START + 96)
-#define IRQ_DB5500_MSP2			(IRQ_SHPI_START + 98)
-#define IRQ_DB5500_SRPTIMER		(IRQ_SHPI_START + 101)
-#define IRQ_DB5500_CTI0			(IRQ_SHPI_START + 108)
-#define IRQ_DB5500_CTI1			(IRQ_SHPI_START + 109)
-#define IRQ_DB5500_ICN_ERR		(IRQ_SHPI_START + 110)
-#define IRQ_DB5500_MALI_PPMMU		(IRQ_SHPI_START + 112)
-#define IRQ_DB5500_MALI_PP		(IRQ_SHPI_START + 113)
-#define IRQ_DB5500_MALI_GPMMU		(IRQ_SHPI_START + 114)
-#define IRQ_DB5500_MALI_GP		(IRQ_SHPI_START + 115)
-#define IRQ_DB5500_MALI			(IRQ_SHPI_START + 116)
-#define IRQ_DB5500_PRCMU_SEM		(IRQ_SHPI_START + 118)
-#define IRQ_DB5500_GPIO0		(IRQ_SHPI_START + 119)
-#define IRQ_DB5500_GPIO1		(IRQ_SHPI_START + 120)
-#define IRQ_DB5500_GPIO2		(IRQ_SHPI_START + 121)
-#define IRQ_DB5500_GPIO3		(IRQ_SHPI_START + 122)
-#define IRQ_DB5500_GPIO4		(IRQ_SHPI_START + 123)
-#define IRQ_DB5500_GPIO5		(IRQ_SHPI_START + 124)
-#define IRQ_DB5500_GPIO6		(IRQ_SHPI_START + 125)
-#define IRQ_DB5500_GPIO7		(IRQ_SHPI_START + 126)
-
-#ifdef CONFIG_UX500_SOC_DB5500
-
-/*
- * After the GPIO ones we reserve a range of IRQ:s in which virtual
- * IRQ:s representing modem IRQ:s can be allocated
- */
-#define IRQ_MODEM_EVENTS_BASE	IRQ_SOC_START
-#define IRQ_MODEM_EVENTS_NBR	72
-#define IRQ_MODEM_EVENTS_END	(IRQ_MODEM_EVENTS_BASE + IRQ_MODEM_EVENTS_NBR)
-
-/* List of virtual IRQ:s that are allocated from the range above */
-#define MBOX_PAIR0_VIRT_IRQ	(IRQ_MODEM_EVENTS_BASE + 43)
-#define MBOX_PAIR1_VIRT_IRQ	(IRQ_MODEM_EVENTS_BASE + 45)
-#define MBOX_PAIR2_VIRT_IRQ	(IRQ_MODEM_EVENTS_BASE + 41)
-
-/*
- * We may have several SoCs, but only one will run at a
- * time, so the one with most IRQs will bump this ahead,
- * but the IRQ_SOC_START remains the same for either SoC.
- */
-#if IRQ_SOC_END < IRQ_MODEM_EVENTS_END
-#undef IRQ_SOC_END
-#define IRQ_SOC_END		IRQ_MODEM_EVENTS_END
-#endif
-
-#endif /* CONFIG_UX500_SOC_DB5500 */
-
-#endif
diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h
index c23a6b5f0c4e..e8928548b6a3 100644
--- a/arch/arm/mach-ux500/include/mach/irqs.h
+++ b/arch/arm/mach-ux500/include/mach/irqs.h
@@ -24,7 +24,7 @@
  */
 #define IRQ_MTU0		(IRQ_SHPI_START + 4)
 
-#define DBX500_NR_INTERNAL_IRQS		160
+#define DBX500_NR_INTERNAL_IRQS		166
 
 /* After chip-specific IRQ numbers we have the GPIO ones */
 #define NOMADIK_NR_GPIO			288
@@ -36,7 +36,6 @@
 /* This will be overridden by SoC-specific irq headers */
 #define IRQ_SOC_END		IRQ_SOC_START
 
-#include <mach/irqs-db5500.h>
 #include <mach/irqs-db8500.h>
 
 #define IRQ_BOARD_START		IRQ_SOC_END
@@ -47,10 +46,6 @@
 #include <mach/irqs-board-mop500.h>
 #endif
 
-#ifdef CONFIG_MACH_U5500
-#include <mach/irqs-board-u5500.h>
-#endif
-
 #define NR_IRQS			IRQ_BOARD_END
 
 #endif /* ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-ux500/include/mach/mbox-db5500.h b/arch/arm/mach-ux500/include/mach/mbox-db5500.h
deleted file mode 100644
index 7f9da4d2fbda..000000000000
--- a/arch/arm/mach-ux500/include/mach/mbox-db5500.h
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- * Author: Stefan Nilsson <stefan.xk.nilsson@stericsson.com> for ST-Ericsson.
- * Author: Martin Persson <martin.persson@stericsson.com> for ST-Ericsson.
- * License terms: GNU General Public License (GPL), version 2.
- */
-
-#ifndef __INC_STE_MBOX_H
-#define __INC_STE_MBOX_H
-
-#define MBOX_BUF_SIZE 16
-#define MBOX_NAME_SIZE 8
-
-/**
-  * mbox_recv_cb_t - Definition of the mailbox callback.
-  * @mbox_msg:	The mailbox message.
-  * @priv:	The clients private data as specified in the call to mbox_setup.
-  *
-  * This function will be called upon reception of new mailbox messages.
-  */
-typedef void mbox_recv_cb_t (u32 mbox_msg, void *priv);
-
-/**
-  * struct mbox - Mailbox instance struct
-  * @list:		Linked list head.
-  * @pdev:		Pointer to device struct.
-  * @cb:		Callback function. Will be called
-  *			when new data is received.
-  * @client_data:	Clients private data. Will be sent back
-  *			in the callback function.
-  * @virtbase_peer:	Virtual address for outgoing mailbox.
-  * @virtbase_local:	Virtual address for incoming mailbox.
-  * @buffer:		Then internal queue for outgoing messages.
-  * @name:		Name of this mailbox.
-  * @buffer_available:	Completion variable to achieve "blocking send".
-  *			This variable will be signaled when there is
-  *			internal buffer space available.
-  * @client_blocked:	To keep track if any client is currently
-  *			blocked.
-  * @lock:		Spinlock to protect this mailbox instance.
-  * @write_index:	Index in internal buffer to write to.
-  * @read_index:	Index in internal buffer to read from.
-  * @allocated:		Indicates whether this particular mailbox
-  *			id has been allocated by someone.
-  */
-struct mbox {
-	struct list_head list;
-	struct platform_device *pdev;
-	mbox_recv_cb_t *cb;
-	void *client_data;
-	void __iomem *virtbase_peer;
-	void __iomem *virtbase_local;
-	u32 buffer[MBOX_BUF_SIZE];
-	char name[MBOX_NAME_SIZE];
-	struct completion buffer_available;
-	u8 client_blocked;
-	spinlock_t lock;
-	u8 write_index;
-	u8 read_index;
-	bool allocated;
-};
-
-/**
-  * mbox_setup - Set up a mailbox and return its instance.
-  * @mbox_id:	The ID number of the mailbox. 0 or 1 for modem CPU,
-  *		2 for modem DSP.
-  * @mbox_cb:	Pointer to the callback function to be called when a new message
-  *		is received.
-  * @priv:	Client user data which will be returned in the callback.
-  *
-  * Returns a mailbox instance to be specified in subsequent calls to mbox_send.
-  */
-struct mbox *mbox_setup(u8 mbox_id, mbox_recv_cb_t *mbox_cb, void *priv);
-
-/**
-  * mbox_send - Send a mailbox message.
-  * @mbox:	Mailbox instance (returned by mbox_setup)
-  * @mbox_msg:	The mailbox message to send.
-  * @block:	Specifies whether this call will block until send is possible,
-  *		or return an error if the mailbox buffer is full.
-  *
-  * Returns 0 on success or a negative error code on error. -ENOMEM indicates
-  * that the internal buffer is full and you have to try again later (or
-  * specify "block" in order to block until send is possible).
-  */
-int mbox_send(struct mbox *mbox, u32 mbox_msg, bool block);
-
-#endif /*INC_STE_MBOX_H*/
diff --git a/arch/arm/mach-ux500/include/mach/msp.h b/arch/arm/mach-ux500/include/mach/msp.h
new file mode 100644
index 000000000000..798be19129ef
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/msp.h
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ * License terms: GNU General Public License (GPL), version 2.
+ */
+
+#ifndef __MSP_H
+#define __MSP_H
+
+#include <plat/ste_dma40.h>
+
+enum msp_i2s_id {
+	MSP_I2S_0 = 0,
+	MSP_I2S_1,
+	MSP_I2S_2,
+	MSP_I2S_3,
+};
+
+/* Platform data structure for a MSP I2S-device */
+struct msp_i2s_platform_data {
+	enum msp_i2s_id id;
+	struct stedma40_chan_cfg *msp_i2s_dma_rx;
+	struct stedma40_chan_cfg *msp_i2s_dma_tx;
+	int (*msp_i2s_init) (void);
+	int (*msp_i2s_exit) (void);
+};
+
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h
index 3dc00ffa7bfa..8b7ed82a2866 100644
--- a/arch/arm/mach-ux500/include/mach/setup.h
+++ b/arch/arm/mach-ux500/include/mach/setup.h
@@ -15,17 +15,12 @@
 #include <linux/init.h>
 
 void __init ux500_map_io(void);
-extern void __init u5500_map_io(void);
 extern void __init u8500_map_io(void);
 
-extern struct device * __init u5500_init_devices(void);
 extern struct device * __init u8500_init_devices(void);
 
 extern void __init ux500_init_irq(void);
-
-extern void __init u5500_sdi_init(struct device *parent);
-
-extern void __init db5500_dma_init(struct device *parent);
+extern void __init ux500_init_late(void);
 
 extern struct device *ux500_soc_device_init(const char *soc_id);
 
diff --git a/arch/arm/mach-ux500/include/mach/uncompress.h b/arch/arm/mach-ux500/include/mach/uncompress.h
index 6fb3c4b0105d..34775baadaea 100644
--- a/arch/arm/mach-ux500/include/mach/uncompress.h
+++ b/arch/arm/mach-ux500/include/mach/uncompress.h
@@ -50,11 +50,8 @@ static void flush(void)
 
 static inline void arch_decomp_setup(void)
 {
-	/* Check in run time if we run on an U8500 or U5500 */
-	if (machine_is_u5500())
-		ux500_uart_base = U5500_UART0_BASE;
-	else
-		ux500_uart_base = U8500_UART2_BASE;
+	/* Use machine_is_foo() macro if you need to switch base someday */
+	ux500_uart_base = U8500_UART2_BASE;
 }
 
 #define arch_decomp_wdog() /* nothing to do here */
diff --git a/arch/arm/mach-ux500/mbox-db5500.c b/arch/arm/mach-ux500/mbox-db5500.c
deleted file mode 100644
index 2b2d51caf9d8..000000000000
--- a/arch/arm/mach-ux500/mbox-db5500.c
+++ /dev/null
@@ -1,565 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- * Author: Stefan Nilsson <stefan.xk.nilsson@stericsson.com> for ST-Ericsson.
- * Author: Martin Persson <martin.persson@stericsson.com> for ST-Ericsson.
- * License terms: GNU General Public License (GPL), version 2.
- */
-
-/*
- * Mailbox nomenclature:
- *
- *       APE           MODEM
- *           mbox pairX
- *   ..........................
- *   .                       .
- *   .           peer        .
- *   .     send  ----        .
- *   .      -->  |  |        .
- *   .           |  |        .
- *   .           ----        .
- *   .                       .
- *   .           local       .
- *   .     rec   ----        .
- *   .           |  | <--    .
- *   .           |  |        .
- *   .           ----        .
- *   .........................
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/spinlock.h>
-#include <linux/errno.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-#include <linux/completion.h>
-#include <mach/mbox-db5500.h>
-
-#define MBOX_NAME "mbox"
-
-#define MBOX_FIFO_DATA        0x000
-#define MBOX_FIFO_ADD         0x004
-#define MBOX_FIFO_REMOVE      0x008
-#define MBOX_FIFO_THRES_FREE  0x00C
-#define MBOX_FIFO_THRES_OCCUP 0x010
-#define MBOX_FIFO_STATUS      0x014
-
-#define MBOX_DISABLE_IRQ 0x4
-#define MBOX_ENABLE_IRQ  0x0
-#define MBOX_LATCH 1
-
-/* Global list of all mailboxes */
-static struct list_head mboxs = LIST_HEAD_INIT(mboxs);
-
-static struct mbox *get_mbox_with_id(u8 id)
-{
-	u8 i;
-	struct list_head *pos = &mboxs;
-	for (i = 0; i <= id; i++)
-		pos = pos->next;
-
-	return (struct mbox *) list_entry(pos, struct mbox, list);
-}
-
-int mbox_send(struct mbox *mbox, u32 mbox_msg, bool block)
-{
-	int res = 0;
-
-	spin_lock(&mbox->lock);
-
-	dev_dbg(&(mbox->pdev->dev),
-		"About to buffer 0x%X to mailbox 0x%X."
-		" ri = %d, wi = %d\n",
-		mbox_msg, (u32)mbox, mbox->read_index,
-		mbox->write_index);
-
-	/* Check if write buffer is full */
-	while (((mbox->write_index + 1) % MBOX_BUF_SIZE) == mbox->read_index) {
-		if (!block) {
-			dev_dbg(&(mbox->pdev->dev),
-			"Buffer full in non-blocking call! "
-			"Returning -ENOMEM!\n");
-			res = -ENOMEM;
-			goto exit;
-		}
-		spin_unlock(&mbox->lock);
-		dev_dbg(&(mbox->pdev->dev),
-			"Buffer full in blocking call! Sleeping...\n");
-		mbox->client_blocked = 1;
-		wait_for_completion(&mbox->buffer_available);
-		dev_dbg(&(mbox->pdev->dev),
-			"Blocking send was woken up! Trying again...\n");
-		spin_lock(&mbox->lock);
-	}
-
-	mbox->buffer[mbox->write_index] = mbox_msg;
-	mbox->write_index = (mbox->write_index + 1) % MBOX_BUF_SIZE;
-
-	/*
-	 * Indicate that we want an IRQ as soon as there is a slot
-	 * in the FIFO
-	 */
-	writel(MBOX_ENABLE_IRQ, mbox->virtbase_peer + MBOX_FIFO_THRES_FREE);
-
-exit:
-	spin_unlock(&mbox->lock);
-	return res;
-}
-EXPORT_SYMBOL(mbox_send);
-
-#if defined(CONFIG_DEBUG_FS)
-/*
- * Expected input: <value> <nbr sends>
- * Example: "echo 0xdeadbeef 4 > mbox-node" sends 0xdeadbeef 4 times
- */
-static ssize_t mbox_write_fifo(struct device *dev,
-			       struct device_attribute *attr,
-			       const char *buf,
-			       size_t count)
-{
-	unsigned long mbox_mess;
-	unsigned long nbr_sends;
-	unsigned long i;
-	char int_buf[16];
-	char *token;
-	char *val;
-
-	struct mbox *mbox = (struct mbox *) dev->platform_data;
-
-	strncpy((char *) &int_buf, buf, sizeof(int_buf));
-	token = (char *) &int_buf;
-
-	/* Parse message */
-	val = strsep(&token, " ");
-	if ((val == NULL) || (strict_strtoul(val, 16, &mbox_mess) != 0))
-		mbox_mess = 0xDEADBEEF;
-
-	val = strsep(&token, " ");
-	if ((val == NULL) || (strict_strtoul(val, 10, &nbr_sends) != 0))
-		nbr_sends = 1;
-
-	dev_dbg(dev, "Will write 0x%lX %ld times using data struct at 0x%X\n",
-		mbox_mess, nbr_sends, (u32) mbox);
-
-	for (i = 0; i < nbr_sends; i++)
-		mbox_send(mbox, mbox_mess, true);
-
-	return count;
-}
-
-static ssize_t mbox_read_fifo(struct device *dev,
-			      struct device_attribute *attr,
-			      char *buf)
-{
-	int mbox_value;
-	struct mbox *mbox = (struct mbox *) dev->platform_data;
-
-	if ((readl(mbox->virtbase_local + MBOX_FIFO_STATUS) & 0x7) <= 0)
-		return sprintf(buf, "Mailbox is empty\n");
-
-	mbox_value = readl(mbox->virtbase_local + MBOX_FIFO_DATA);
-	writel(MBOX_LATCH, (mbox->virtbase_local + MBOX_FIFO_REMOVE));
-
-	return sprintf(buf, "0x%X\n", mbox_value);
-}
-
-static DEVICE_ATTR(fifo, S_IWUGO | S_IRUGO, mbox_read_fifo, mbox_write_fifo);
-
-static int mbox_show(struct seq_file *s, void *data)
-{
-	struct list_head *pos;
-	u8 mbox_index = 0;
-
-	list_for_each(pos, &mboxs) {
-		struct mbox *m =
-			(struct mbox *) list_entry(pos, struct mbox, list);
-		if (m == NULL) {
-			seq_printf(s,
-				   "Unable to retrieve mailbox %d\n",
-				   mbox_index);
-			continue;
-		}
-
-		spin_lock(&m->lock);
-		if ((m->virtbase_peer == NULL) || (m->virtbase_local == NULL)) {
-			seq_printf(s, "MAILBOX %d not setup or corrupt\n",
-				   mbox_index);
-			spin_unlock(&m->lock);
-			continue;
-		}
-
-		seq_printf(s,
-		"===========================\n"
-		" MAILBOX %d\n"
-		" PEER MAILBOX DUMP\n"
-		"---------------------------\n"
-		"FIFO:                 0x%X (%d)\n"
-		"Free     Threshold:   0x%.2X (%d)\n"
-		"Occupied Threshold:   0x%.2X (%d)\n"
-		"Status:               0x%.2X (%d)\n"
-		"   Free spaces  (ot):    %d (%d)\n"
-		"   Occup spaces (ot):    %d (%d)\n"
-		"===========================\n"
-		" LOCAL MAILBOX DUMP\n"
-		"---------------------------\n"
-		"FIFO:                 0x%.X (%d)\n"
-		"Free     Threshold:   0x%.2X (%d)\n"
-		"Occupied Threshold:   0x%.2X (%d)\n"
-		"Status:               0x%.2X (%d)\n"
-		"   Free spaces  (ot):    %d (%d)\n"
-		"   Occup spaces (ot):    %d (%d)\n"
-		"===========================\n"
-		"write_index: %d\n"
-		"read_index : %d\n"
-		"===========================\n"
-		"\n",
-		mbox_index,
-		readl(m->virtbase_peer + MBOX_FIFO_DATA),
-		readl(m->virtbase_peer + MBOX_FIFO_DATA),
-		readl(m->virtbase_peer + MBOX_FIFO_THRES_FREE),
-		readl(m->virtbase_peer + MBOX_FIFO_THRES_FREE),
-		readl(m->virtbase_peer + MBOX_FIFO_THRES_OCCUP),
-		readl(m->virtbase_peer + MBOX_FIFO_THRES_OCCUP),
-		readl(m->virtbase_peer + MBOX_FIFO_STATUS),
-		readl(m->virtbase_peer + MBOX_FIFO_STATUS),
-		(readl(m->virtbase_peer + MBOX_FIFO_STATUS) >> 4) & 0x7,
-		(readl(m->virtbase_peer + MBOX_FIFO_STATUS) >> 7) & 0x1,
-		(readl(m->virtbase_peer + MBOX_FIFO_STATUS) >> 0) & 0x7,
-		(readl(m->virtbase_peer + MBOX_FIFO_STATUS) >> 3) & 0x1,
-		readl(m->virtbase_local + MBOX_FIFO_DATA),
-		readl(m->virtbase_local + MBOX_FIFO_DATA),
-		readl(m->virtbase_local + MBOX_FIFO_THRES_FREE),
-		readl(m->virtbase_local + MBOX_FIFO_THRES_FREE),
-		readl(m->virtbase_local + MBOX_FIFO_THRES_OCCUP),
-		readl(m->virtbase_local + MBOX_FIFO_THRES_OCCUP),
-		readl(m->virtbase_local + MBOX_FIFO_STATUS),
-		readl(m->virtbase_local + MBOX_FIFO_STATUS),
-		(readl(m->virtbase_local + MBOX_FIFO_STATUS) >> 4) & 0x7,
-		(readl(m->virtbase_local + MBOX_FIFO_STATUS) >> 7) & 0x1,
-		(readl(m->virtbase_local + MBOX_FIFO_STATUS) >> 0) & 0x7,
-		(readl(m->virtbase_local + MBOX_FIFO_STATUS) >> 3) & 0x1,
-		m->write_index, m->read_index);
-		mbox_index++;
-		spin_unlock(&m->lock);
-	}
-
-	return 0;
-}
-
-static int mbox_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, mbox_show, NULL);
-}
-
-static const struct file_operations mbox_operations = {
-	.owner = THIS_MODULE,
-	.open = mbox_open,
-	.read = seq_read,
-	.llseek = seq_lseek,
-	.release = single_release,
-};
-#endif
-
-static irqreturn_t mbox_irq(int irq, void *arg)
-{
-	u32 mbox_value;
-	int nbr_occup;
-	int nbr_free;
-	struct mbox *mbox = (struct mbox *) arg;
-
-	spin_lock(&mbox->lock);
-
-	dev_dbg(&(mbox->pdev->dev),
-		"mbox IRQ [%d] received. ri = %d, wi = %d\n",
-		irq, mbox->read_index, mbox->write_index);
-
-	/*
-	 * Check if we have any outgoing messages, and if there is space for
-	 * them in the FIFO.
-	 */
-	if (mbox->read_index != mbox->write_index) {
-		/*
-		 * Check by reading FREE for LOCAL since that indicates
-		 * OCCUP for PEER
-		 */
-		nbr_free = (readl(mbox->virtbase_local + MBOX_FIFO_STATUS)
-			    >> 4) & 0x7;
-		dev_dbg(&(mbox->pdev->dev),
-			"Status indicates %d empty spaces in the FIFO!\n",
-			nbr_free);
-
-		while ((nbr_free > 0) &&
-		       (mbox->read_index != mbox->write_index)) {
-			/* Write the message and latch it into the FIFO */
-			writel(mbox->buffer[mbox->read_index],
-			       (mbox->virtbase_peer + MBOX_FIFO_DATA));
-			writel(MBOX_LATCH,
-			       (mbox->virtbase_peer + MBOX_FIFO_ADD));
-			dev_dbg(&(mbox->pdev->dev),
-				"Wrote message 0x%X to addr 0x%X\n",
-				mbox->buffer[mbox->read_index],
-				(u32) (mbox->virtbase_peer + MBOX_FIFO_DATA));
-
-			nbr_free--;
-			mbox->read_index =
-				(mbox->read_index + 1) % MBOX_BUF_SIZE;
-		}
-
-		/*
-		 * Check if we still want IRQ:s when there is free
-		 * space to send
-		 */
-		if (mbox->read_index != mbox->write_index) {
-			dev_dbg(&(mbox->pdev->dev),
-				"Still have messages to send, but FIFO full. "
-				"Request IRQ again!\n");
-			writel(MBOX_ENABLE_IRQ,
-			       mbox->virtbase_peer + MBOX_FIFO_THRES_FREE);
-		} else {
-			dev_dbg(&(mbox->pdev->dev),
-				"No more messages to send. "
-				"Do not request IRQ again!\n");
-			writel(MBOX_DISABLE_IRQ,
-			       mbox->virtbase_peer + MBOX_FIFO_THRES_FREE);
-		}
-
-		/*
-		 * Check if we can signal any blocked clients that it is OK to
-		 * start buffering again
-		 */
-		if (mbox->client_blocked &&
-		    (((mbox->write_index + 1) % MBOX_BUF_SIZE)
-		     != mbox->read_index)) {
-			dev_dbg(&(mbox->pdev->dev),
-				"Waking up blocked client\n");
-			complete(&mbox->buffer_available);
-			mbox->client_blocked = 0;
-		}
-	}
-
-	/* Check if we have any incoming messages */
-	nbr_occup = readl(mbox->virtbase_local + MBOX_FIFO_STATUS) & 0x7;
-	if (nbr_occup == 0)
-		goto exit;
-
-	if (mbox->cb == NULL) {
-		dev_dbg(&(mbox->pdev->dev), "No receive callback registered, "
-			"leaving %d incoming messages in fifo!\n", nbr_occup);
-		goto exit;
-	}
-
-	/* Read and acknowledge the message */
-	mbox_value = readl(mbox->virtbase_local + MBOX_FIFO_DATA);
-	writel(MBOX_LATCH, (mbox->virtbase_local + MBOX_FIFO_REMOVE));
-
-	/* Notify consumer of new mailbox message */
-	dev_dbg(&(mbox->pdev->dev), "Calling callback for message 0x%X!\n",
-		mbox_value);
-	mbox->cb(mbox_value, mbox->client_data);
-
-exit:
-	dev_dbg(&(mbox->pdev->dev), "Exit mbox IRQ. ri = %d, wi = %d\n",
-		mbox->read_index, mbox->write_index);
-	spin_unlock(&mbox->lock);
-
-	return IRQ_HANDLED;
-}
-
-/* Setup is executed once for each mbox pair */
-struct mbox *mbox_setup(u8 mbox_id, mbox_recv_cb_t *mbox_cb, void *priv)
-{
-	struct resource *resource;
-	int irq;
-	int res;
-	struct mbox *mbox;
-
-	mbox = get_mbox_with_id(mbox_id);
-	if (mbox == NULL) {
-		dev_err(&(mbox->pdev->dev), "Incorrect mailbox id: %d!\n",
-			mbox_id);
-		goto exit;
-	}
-
-	/*
-	 * Check if mailbox has been allocated to someone else,
-	 * otherwise allocate it
-	 */
-	if (mbox->allocated) {
-		dev_err(&(mbox->pdev->dev), "Mailbox number %d is busy!\n",
-			mbox_id);
-		mbox = NULL;
-		goto exit;
-	}
-	mbox->allocated = true;
-
-	dev_dbg(&(mbox->pdev->dev), "Initiating mailbox number %d: 0x%X...\n",
-		mbox_id, (u32)mbox);
-
-	mbox->client_data = priv;
-	mbox->cb = mbox_cb;
-
-	/* Get addr for peer mailbox and ioremap it */
-	resource = platform_get_resource_byname(mbox->pdev,
-						IORESOURCE_MEM,
-						"mbox_peer");
-	if (resource == NULL) {
-		dev_err(&(mbox->pdev->dev),
-			"Unable to retrieve mbox peer resource\n");
-		mbox = NULL;
-		goto exit;
-	}
-	dev_dbg(&(mbox->pdev->dev),
-		"Resource name: %s start: 0x%X, end: 0x%X\n",
-		resource->name, resource->start, resource->end);
-	mbox->virtbase_peer = ioremap(resource->start, resource_size(resource));
-	if (!mbox->virtbase_peer) {
-		dev_err(&(mbox->pdev->dev), "Unable to ioremap peer mbox\n");
-		mbox = NULL;
-		goto exit;
-	}
-	dev_dbg(&(mbox->pdev->dev),
-		"ioremapped peer physical: (0x%X-0x%X) to virtual: 0x%X\n",
-		resource->start, resource->end, (u32) mbox->virtbase_peer);
-
-	/* Get addr for local mailbox and ioremap it */
-	resource = platform_get_resource_byname(mbox->pdev,
-						IORESOURCE_MEM,
-						"mbox_local");
-	if (resource == NULL) {
-		dev_err(&(mbox->pdev->dev),
-			"Unable to retrieve mbox local resource\n");
-		mbox = NULL;
-		goto exit;
-	}
-	dev_dbg(&(mbox->pdev->dev),
-		"Resource name: %s start: 0x%X, end: 0x%X\n",
-		resource->name, resource->start, resource->end);
-	mbox->virtbase_local = ioremap(resource->start, resource_size(resource));
-	if (!mbox->virtbase_local) {
-		dev_err(&(mbox->pdev->dev), "Unable to ioremap local mbox\n");
-		mbox = NULL;
-		goto exit;
-	}
-	dev_dbg(&(mbox->pdev->dev),
-		"ioremapped local physical: (0x%X-0x%X) to virtual: 0x%X\n",
-		resource->start, resource->end, (u32) mbox->virtbase_peer);
-
-	init_completion(&mbox->buffer_available);
-	mbox->client_blocked = 0;
-
-	/* Get IRQ for mailbox and allocate it */
-	irq = platform_get_irq_byname(mbox->pdev, "mbox_irq");
-	if (irq < 0) {
-		dev_err(&(mbox->pdev->dev),
-			"Unable to retrieve mbox irq resource\n");
-		mbox = NULL;
-		goto exit;
-	}
-
-	dev_dbg(&(mbox->pdev->dev), "Allocating irq %d...\n", irq);
-	res = request_irq(irq, mbox_irq, 0, mbox->name, (void *) mbox);
-	if (res < 0) {
-		dev_err(&(mbox->pdev->dev),
-			"Unable to allocate mbox irq %d\n", irq);
-		mbox = NULL;
-		goto exit;
-	}
-
-	/* Set up mailbox to not launch IRQ on free space in mailbox */
-	writel(MBOX_DISABLE_IRQ, mbox->virtbase_peer + MBOX_FIFO_THRES_FREE);
-
-	/*
-	 * Set up mailbox to launch IRQ on new message if we have
-	 * a callback set. If not, do not raise IRQ, but keep message
-	 * in FIFO for manual retrieval
-	 */
-	if (mbox_cb != NULL)
-		writel(MBOX_ENABLE_IRQ,
-		       mbox->virtbase_local + MBOX_FIFO_THRES_OCCUP);
-	else
-		writel(MBOX_DISABLE_IRQ,
-		       mbox->virtbase_local + MBOX_FIFO_THRES_OCCUP);
-
-#if defined(CONFIG_DEBUG_FS)
-	res = device_create_file(&(mbox->pdev->dev), &dev_attr_fifo);
-	if (res != 0)
-		dev_warn(&(mbox->pdev->dev),
-			 "Unable to create mbox sysfs entry");
-
-	(void) debugfs_create_file("mbox", S_IFREG | S_IRUGO, NULL,
-				   NULL, &mbox_operations);
-#endif
-
-	dev_info(&(mbox->pdev->dev),
-		 "Mailbox driver with index %d initiated!\n", mbox_id);
-
-exit:
-	return mbox;
-}
-EXPORT_SYMBOL(mbox_setup);
-
-
-int __init mbox_probe(struct platform_device *pdev)
-{
-	struct mbox local_mbox;
-	struct mbox *mbox;
-	int res = 0;
-	dev_dbg(&(pdev->dev), "Probing mailbox (pdev = 0x%X)...\n", (u32) pdev);
-
-	memset(&local_mbox, 0x0, sizeof(struct mbox));
-
-	/* Associate our mbox data with the platform device */
-	res = platform_device_add_data(pdev,
-				       (void *) &local_mbox,
-				       sizeof(struct mbox));
-	if (res != 0) {
-		dev_err(&(pdev->dev),
-			"Unable to allocate driver platform data!\n");
-		goto exit;
-	}
-
-	mbox = (struct mbox *) pdev->dev.platform_data;
-	mbox->pdev = pdev;
-	mbox->write_index = 0;
-	mbox->read_index = 0;
-
-	INIT_LIST_HEAD(&(mbox->list));
-	list_add_tail(&(mbox->list), &mboxs);
-
-	sprintf(mbox->name, "%s", MBOX_NAME);
-	spin_lock_init(&mbox->lock);
-
-	dev_info(&(pdev->dev), "Mailbox driver loaded\n");
-
-exit:
-	return res;
-}
-
-static struct platform_driver mbox_driver = {
-	.driver = {
-		.name = MBOX_NAME,
-		.owner = THIS_MODULE,
-	},
-};
-
-static int __init mbox_init(void)
-{
-	return platform_driver_probe(&mbox_driver, mbox_probe);
-}
-
-module_init(mbox_init);
-
-void __exit mbox_exit(void)
-{
-	platform_driver_unregister(&mbox_driver);
-}
-
-module_exit(mbox_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("MBOX driver");
diff --git a/arch/arm/mach-ux500/modem-irq-db5500.c b/arch/arm/mach-ux500/modem-irq-db5500.c
deleted file mode 100644
index 6b86416c94c9..000000000000
--- a/arch/arm/mach-ux500/modem-irq-db5500.c
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- * Author: Stefan Nilsson <stefan.xk.nilsson@stericsson.com> for ST-Ericsson.
- * Author: Martin Persson <martin.persson@stericsson.com> for ST-Ericsson.
- * License terms: GNU General Public License (GPL), version 2.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-
-#include <mach/id.h>
-
-#define MODEM_INTCON_BASE_ADDR 0xBFFD3000
-#define MODEM_INTCON_SIZE 0xFFF
-
-#define DEST_IRQ41_OFFSET 0x2A4
-#define DEST_IRQ43_OFFSET 0x2AC
-#define DEST_IRQ45_OFFSET 0x2B4
-
-#define PRIO_IRQ41_OFFSET 0x6A4
-#define PRIO_IRQ43_OFFSET 0x6AC
-#define PRIO_IRQ45_OFFSET 0x6B4
-
-#define ALLOW_IRQ_OFFSET 0x104
-
-#define MODEM_INTCON_CPU_NBR 0x1
-#define MODEM_INTCON_PRIO_HIGH 0x0
-
-#define MODEM_INTCON_ALLOW_IRQ41 0x0200
-#define MODEM_INTCON_ALLOW_IRQ43 0x0800
-#define MODEM_INTCON_ALLOW_IRQ45 0x2000
-
-#define MODEM_IRQ_REG_OFFSET 0x4
-
-struct modem_irq {
-	void __iomem *modem_intcon_base;
-};
-
-
-static void setup_modem_intcon(void __iomem *modem_intcon_base)
-{
-	/* IC_DESTINATION_BASE_ARRAY - Which CPU to receive the IRQ */
-	writel(MODEM_INTCON_CPU_NBR, modem_intcon_base + DEST_IRQ41_OFFSET);
-	writel(MODEM_INTCON_CPU_NBR, modem_intcon_base + DEST_IRQ43_OFFSET);
-	writel(MODEM_INTCON_CPU_NBR, modem_intcon_base + DEST_IRQ45_OFFSET);
-
-	/* IC_PRIORITY_BASE_ARRAY - IRQ priority in modem IRQ controller */
-	writel(MODEM_INTCON_PRIO_HIGH, modem_intcon_base + PRIO_IRQ41_OFFSET);
-	writel(MODEM_INTCON_PRIO_HIGH, modem_intcon_base + PRIO_IRQ43_OFFSET);
-	writel(MODEM_INTCON_PRIO_HIGH, modem_intcon_base + PRIO_IRQ45_OFFSET);
-
-	/* IC_ALLOW_ARRAY - IRQ enable */
-	writel(MODEM_INTCON_ALLOW_IRQ41 |
-		   MODEM_INTCON_ALLOW_IRQ43 |
-		   MODEM_INTCON_ALLOW_IRQ45,
-		   modem_intcon_base + ALLOW_IRQ_OFFSET);
-}
-
-static irqreturn_t modem_cpu_irq_handler(int irq, void *data)
-{
-	int real_irq;
-	int virt_irq;
-	struct modem_irq *mi = (struct modem_irq *)data;
-
-	/* Read modem side IRQ number from modem IRQ controller */
-	real_irq = readl(mi->modem_intcon_base + MODEM_IRQ_REG_OFFSET) & 0xFF;
-	virt_irq = IRQ_MODEM_EVENTS_BASE + real_irq;
-
-	pr_debug("modem_irq: Worker read addr 0x%X and got value 0x%X "
-		 "which will be 0x%X (%d) which translates to "
-		 "virtual IRQ 0x%X (%d)!\n",
-		   (u32)mi->modem_intcon_base + MODEM_IRQ_REG_OFFSET,
-		   real_irq,
-		   real_irq & 0xFF,
-		   real_irq & 0xFF,
-		   virt_irq,
-		   virt_irq);
-
-	if (virt_irq != 0)
-		generic_handle_irq(virt_irq);
-
-	pr_debug("modem_irq: Done handling virtual IRQ %d!\n", virt_irq);
-
-	return IRQ_HANDLED;
-}
-
-static void create_virtual_irq(int irq, struct irq_chip *modem_irq_chip)
-{
-	irq_set_chip_and_handler(irq, modem_irq_chip, handle_simple_irq);
-	set_irq_flags(irq, IRQF_VALID);
-
-	pr_debug("modem_irq: Created virtual IRQ %d\n", irq);
-}
-
-static int modem_irq_init(void)
-{
-	int err;
-	static struct irq_chip  modem_irq_chip;
-	struct modem_irq *mi;
-
-	if (!cpu_is_u5500())
-		return -ENODEV;
-
-	pr_info("modem_irq: Set up IRQ handler for incoming modem IRQ %d\n",
-		   IRQ_DB5500_MODEM);
-
-	mi = kmalloc(sizeof(struct modem_irq), GFP_KERNEL);
-	if (!mi) {
-		pr_err("modem_irq: Could not allocate device\n");
-		return -ENOMEM;
-	}
-
-	mi->modem_intcon_base =
-		ioremap(MODEM_INTCON_BASE_ADDR, MODEM_INTCON_SIZE);
-	pr_debug("modem_irq: ioremapped modem_intcon_base from "
-		 "phy 0x%x to virt 0x%x\n", MODEM_INTCON_BASE_ADDR,
-		 (u32)mi->modem_intcon_base);
-
-	setup_modem_intcon(mi->modem_intcon_base);
-
-	modem_irq_chip = dummy_irq_chip;
-	modem_irq_chip.name = "modem_irq";
-
-	/* Create the virtual IRQ:s needed */
-	create_virtual_irq(MBOX_PAIR0_VIRT_IRQ, &modem_irq_chip);
-	create_virtual_irq(MBOX_PAIR1_VIRT_IRQ, &modem_irq_chip);
-	create_virtual_irq(MBOX_PAIR2_VIRT_IRQ, &modem_irq_chip);
-
-	err = request_threaded_irq(IRQ_DB5500_MODEM, NULL,
-				   modem_cpu_irq_handler, IRQF_ONESHOT,
-				   "modem_irq", mi);
-	if (err)
-		pr_err("modem_irq: Could not register IRQ %d\n",
-		       IRQ_DB5500_MODEM);
-
-	return 0;
-}
-
-arch_initcall(modem_irq_init);
diff --git a/arch/arm/mach-ux500/pins-db5500.h b/arch/arm/mach-ux500/pins-db5500.h
deleted file mode 100644
index bf50c21fe69d..000000000000
--- a/arch/arm/mach-ux500/pins-db5500.h
+++ /dev/null
@@ -1,620 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License terms: GNU General Public License, version 2
- * Author: Rabin Vincent <rabin.vincent@stericsson.com>
- */
-
-#ifndef __MACH_DB5500_PINS_H
-#define __MACH_DB5500_PINS_H
-
-#define GPIO0_GPIO		PIN_CFG(0, GPIO)
-#define GPIO0_SM_CS3n		PIN_CFG(0, ALT_A)
-
-#define GPIO1_GPIO		PIN_CFG(1, GPIO)
-#define GPIO1_SM_A3		PIN_CFG(1, ALT_A)
-
-#define GPIO2_GPIO		PIN_CFG(2, GPIO)
-#define GPIO2_SM_A4		PIN_CFG(2, ALT_A)
-#define GPIO2_SM_AVD		PIN_CFG(2, ALT_B)
-
-#define GPIO3_GPIO		PIN_CFG(3, GPIO)
-#define GPIO3_I2C1_SCL		PIN_CFG(3, ALT_A)
-
-#define GPIO4_GPIO		PIN_CFG(4, GPIO)
-#define GPIO4_I2C1_SDA		PIN_CFG(4, ALT_A)
-
-#define GPIO5_GPIO		PIN_CFG(5, GPIO)
-#define GPIO5_MC0_DAT0		PIN_CFG(5, ALT_A)
-#define GPIO5_SM_ADQ8		PIN_CFG(5, ALT_B)
-
-#define GPIO6_GPIO		PIN_CFG(6, GPIO)
-#define GPIO6_MC0_DAT1		PIN_CFG(6, ALT_A)
-#define GPIO6_SM_ADQ0		PIN_CFG(6, ALT_B)
-
-#define GPIO7_GPIO		PIN_CFG(7, GPIO)
-#define GPIO7_MC0_DAT2		PIN_CFG(7, ALT_A)
-#define GPIO7_SM_ADQ9		PIN_CFG(7, ALT_B)
-
-#define GPIO8_GPIO		PIN_CFG(8, GPIO)
-#define GPIO8_MC0_DAT3		PIN_CFG(8, ALT_A)
-#define GPIO8_SM_ADQ1		PIN_CFG(8, ALT_B)
-
-#define GPIO9_GPIO		PIN_CFG(9, GPIO)
-#define GPIO9_MC0_DAT4		PIN_CFG(9, ALT_A)
-#define GPIO9_SM_ADQ10		PIN_CFG(9, ALT_B)
-
-#define GPIO10_GPIO		PIN_CFG(10, GPIO)
-#define GPIO10_MC0_DAT5		PIN_CFG(10, ALT_A)
-#define GPIO10_SM_ADQ2		PIN_CFG(10, ALT_B)
-
-#define GPIO11_GPIO		PIN_CFG(11, GPIO)
-#define GPIO11_MC0_DAT6		PIN_CFG(11, ALT_A)
-#define GPIO11_SM_ADQ11		PIN_CFG(11, ALT_B)
-
-#define GPIO12_GPIO		PIN_CFG(12, GPIO)
-#define GPIO12_MC0_DAT7		PIN_CFG(12, ALT_A)
-#define GPIO12_SM_ADQ3		PIN_CFG(12, ALT_B)
-
-#define GPIO13_GPIO		PIN_CFG(13, GPIO)
-#define GPIO13_MC0_CMD		PIN_CFG(13, ALT_A)
-#define GPIO13_SM_BUSY0n	PIN_CFG(13, ALT_B)
-#define GPIO13_SM_WAIT0n	PIN_CFG(13, ALT_C)
-
-#define GPIO14_GPIO		PIN_CFG(14, GPIO)
-#define GPIO14_MC0_CLK		PIN_CFG(14, ALT_A)
-#define GPIO14_SM_CS1n		PIN_CFG(14, ALT_B)
-#define GPIO14_SM_CKO		PIN_CFG(14, ALT_C)
-
-#define GPIO15_GPIO		PIN_CFG(15, GPIO)
-#define GPIO15_SM_A5		PIN_CFG(15, ALT_A)
-#define GPIO15_SM_CLE		PIN_CFG(15, ALT_B)
-
-#define GPIO16_GPIO		PIN_CFG(16, GPIO)
-#define GPIO16_MC2_CMD		PIN_CFG(16, ALT_A)
-#define GPIO16_SM_OEn		PIN_CFG(16, ALT_B)
-
-#define GPIO17_GPIO		PIN_CFG(17, GPIO)
-#define GPIO17_MC2_CLK		PIN_CFG(17, ALT_A)
-#define GPIO17_SM_WEn		PIN_CFG(17, ALT_B)
-
-#define GPIO18_GPIO		PIN_CFG(18, GPIO)
-#define GPIO18_SM_A6		PIN_CFG(18, ALT_A)
-#define GPIO18_SM_ALE		PIN_CFG(18, ALT_B)
-#define GPIO18_SM_AVDn		PIN_CFG(18, ALT_C)
-
-#define GPIO19_GPIO		PIN_CFG(19, GPIO)
-#define GPIO19_MC2_DAT1		PIN_CFG(19, ALT_A)
-#define GPIO19_SM_ADQ4		PIN_CFG(19, ALT_B)
-
-#define GPIO20_GPIO		PIN_CFG(20, GPIO)
-#define GPIO20_MC2_DAT3		PIN_CFG(20, ALT_A)
-#define GPIO20_SM_ADQ5		PIN_CFG(20, ALT_B)
-
-#define GPIO21_GPIO		PIN_CFG(21, GPIO)
-#define GPIO21_MC2_DAT5		PIN_CFG(21, ALT_A)
-#define GPIO21_SM_ADQ6		PIN_CFG(21, ALT_B)
-
-#define GPIO22_GPIO		PIN_CFG(22, GPIO)
-#define GPIO22_MC2_DAT7		PIN_CFG(22, ALT_A)
-#define GPIO22_SM_ADQ7		PIN_CFG(22, ALT_B)
-
-#define GPIO23_GPIO		PIN_CFG(23, GPIO)
-#define GPIO23_MC2_DAT0		PIN_CFG(23, ALT_A)
-#define GPIO23_SM_ADQ12		PIN_CFG(23, ALT_B)
-#define GPIO23_MC0_DAT1		PIN_CFG(23, ALT_C)
-
-#define GPIO24_GPIO		PIN_CFG(24, GPIO)
-#define GPIO24_MC2_DAT2		PIN_CFG(24, ALT_A)
-#define GPIO24_SM_ADQ13		PIN_CFG(24, ALT_B)
-#define GPIO24_MC0_DAT3		PIN_CFG(24, ALT_C)
-
-#define GPIO25_GPIO		PIN_CFG(25, GPIO)
-#define GPIO25_MC2_DAT4		PIN_CFG(25, ALT_A)
-#define GPIO25_SM_ADQ14		PIN_CFG(25, ALT_B)
-#define GPIO25_MC0_CMD		PIN_CFG(25, ALT_C)
-
-#define GPIO26_GPIO		PIN_CFG(26, GPIO)
-#define GPIO26_MC2_DAT6		PIN_CFG(26, ALT_A)
-#define GPIO26_SM_ADQ15		PIN_CFG(26, ALT_B)
-
-#define GPIO27_GPIO		PIN_CFG(27, GPIO)
-#define GPIO27_SM_CS0n		PIN_CFG(27, ALT_A)
-#define GPIO27_SM_PS0n		PIN_CFG(27, ALT_B)
-
-#define GPIO28_GPIO		PIN_CFG(28, GPIO)
-#define GPIO28_U0_TXD		PIN_CFG(28, ALT_A)
-#define GPIO28_SM_A0		PIN_CFG(28, ALT_B)
-
-#define GPIO29_GPIO		PIN_CFG(29, GPIO)
-#define GPIO29_U0_RXD		PIN_CFG(29, ALT_A)
-#define GPIO29_SM_A1		PIN_CFG(29, ALT_B)
-#define GPIO29_PWM_0		PIN_CFG(29, ALT_C)
-
-#define GPIO30_GPIO		PIN_CFG(30, GPIO)
-#define GPIO30_MC0_DAT5		PIN_CFG(30, ALT_A)
-#define GPIO30_SM_A2		PIN_CFG(30, ALT_B)
-#define GPIO30_PWM_1		PIN_CFG(30, ALT_C)
-
-#define GPIO31_GPIO		PIN_CFG(31, GPIO)
-#define GPIO31_MC0_DAT7		PIN_CFG(31, ALT_A)
-#define GPIO31_SM_CS2n		PIN_CFG(31, ALT_B)
-#define GPIO31_PWM_2		PIN_CFG(31, ALT_C)
-
-#define GPIO32_GPIO		PIN_CFG(32, GPIO)
-#define GPIO32_MSP0_TCK		PIN_CFG(32, ALT_A)
-#define GPIO32_ACCI2S0_SCK	PIN_CFG(32, ALT_B)
-
-#define GPIO33_GPIO		PIN_CFG(33, GPIO)
-#define GPIO33_MSP0_TFS		PIN_CFG(33, ALT_A)
-#define GPIO33_ACCI2S0_WS	PIN_CFG(33, ALT_B)
-
-#define GPIO34_GPIO		PIN_CFG(34, GPIO)
-#define GPIO34_MSP0_TXD		PIN_CFG(34, ALT_A)
-#define GPIO34_ACCI2S0_DLD	PIN_CFG(34, ALT_B)
-
-#define GPIO35_GPIO		PIN_CFG(35, GPIO)
-#define GPIO35_MSP0_RXD		PIN_CFG(35, ALT_A)
-#define GPIO35_ACCI2S0_ULD	PIN_CFG(35, ALT_B)
-
-#define GPIO64_GPIO		PIN_CFG(64, GPIO)
-#define GPIO64_USB_DAT0		PIN_CFG(64, ALT_A)
-#define GPIO64_U0_TXD		PIN_CFG(64, ALT_B)
-
-#define GPIO65_GPIO		PIN_CFG(65, GPIO)
-#define GPIO65_USB_DAT1		PIN_CFG(65, ALT_A)
-#define GPIO65_U0_RXD		PIN_CFG(65, ALT_B)
-
-#define GPIO66_GPIO		PIN_CFG(66, GPIO)
-#define GPIO66_USB_DAT2		PIN_CFG(66, ALT_A)
-
-#define GPIO67_GPIO		PIN_CFG(67, GPIO)
-#define GPIO67_USB_DAT3		PIN_CFG(67, ALT_A)
-
-#define GPIO68_GPIO		PIN_CFG(68, GPIO)
-#define GPIO68_USB_DAT4		PIN_CFG(68, ALT_A)
-
-#define GPIO69_GPIO		PIN_CFG(69, GPIO)
-#define GPIO69_USB_DAT5		PIN_CFG(69, ALT_A)
-
-#define GPIO70_GPIO		PIN_CFG(70, GPIO)
-#define GPIO70_USB_DAT6		PIN_CFG(70, ALT_A)
-
-#define GPIO71_GPIO		PIN_CFG(71, GPIO)
-#define GPIO71_USB_DAT7		PIN_CFG(71, ALT_A)
-
-#define GPIO72_GPIO		PIN_CFG(72, GPIO)
-#define GPIO72_USB_STP		PIN_CFG(72, ALT_A)
-
-#define GPIO73_GPIO		PIN_CFG(73, GPIO)
-#define GPIO73_USB_DIR		PIN_CFG(73, ALT_A)
-
-#define GPIO74_GPIO		PIN_CFG(74, GPIO)
-#define GPIO74_USB_NXT		PIN_CFG(74, ALT_A)
-
-#define GPIO75_GPIO		PIN_CFG(75, GPIO)
-#define GPIO75_USB_XCLK		PIN_CFG(75, ALT_A)
-
-#define GPIO76_GPIO		PIN_CFG(76, GPIO)
-
-#define GPIO77_GPIO		PIN_CFG(77, GPIO)
-#define GPIO77_ACCTX_ON		PIN_CFG(77, ALT_A)
-
-#define GPIO78_GPIO		PIN_CFG(78, GPIO)
-#define GPIO78_IRQn		PIN_CFG(78, ALT_A)
-
-#define GPIO79_GPIO		PIN_CFG(79, GPIO)
-#define GPIO79_ACCSIM_Clk	PIN_CFG(79, ALT_A)
-
-#define GPIO80_GPIO		PIN_CFG(80, GPIO)
-#define GPIO80_ACCSIM_Da	PIN_CFG(80, ALT_A)
-
-#define GPIO81_GPIO		PIN_CFG(81, GPIO)
-#define GPIO81_ACCSIM_Reset	PIN_CFG(81, ALT_A)
-
-#define GPIO82_GPIO		PIN_CFG(82, GPIO)
-#define GPIO82_ACCSIM_DDir	PIN_CFG(82, ALT_A)
-
-#define GPIO96_GPIO		PIN_CFG(96, GPIO)
-#define GPIO96_MSP1_TCK		PIN_CFG(96, ALT_A)
-#define GPIO96_PRCMU_DEBUG3	PIN_CFG(96, ALT_B)
-#define GPIO96_PRCMU_DEBUG7	PIN_CFG(96, ALT_C)
-
-#define GPIO97_GPIO		PIN_CFG(97, GPIO)
-#define GPIO97_MSP1_TFS		PIN_CFG(97, ALT_A)
-#define GPIO97_PRCMU_DEBUG2	PIN_CFG(97, ALT_B)
-#define GPIO97_PRCMU_DEBUG6	PIN_CFG(97, ALT_C)
-
-#define GPIO98_GPIO		PIN_CFG(98, GPIO)
-#define GPIO98_MSP1_TXD		PIN_CFG(98, ALT_A)
-#define GPIO98_PRCMU_DEBUG1	PIN_CFG(98, ALT_B)
-#define GPIO98_PRCMU_DEBUG5	PIN_CFG(98, ALT_C)
-
-#define GPIO99_GPIO		PIN_CFG(99, GPIO)
-#define GPIO99_MSP1_RXD		PIN_CFG(99, ALT_A)
-#define GPIO99_PRCMU_DEBUG0	PIN_CFG(99, ALT_B)
-#define GPIO99_PRCMU_DEBUG4	PIN_CFG(99, ALT_C)
-
-#define GPIO100_GPIO		PIN_CFG(100, GPIO)
-#define GPIO100_I2C0_SCL	PIN_CFG(100, ALT_A)
-
-#define GPIO101_GPIO		PIN_CFG(101, GPIO)
-#define GPIO101_I2C0_SDA	PIN_CFG(101, ALT_A)
-
-#define GPIO128_GPIO		PIN_CFG(128, GPIO)
-#define GPIO128_KP_I0		PIN_CFG(128, ALT_A)
-#define GPIO128_BUSMON_D0	PIN_CFG(128, ALT_B)
-
-#define GPIO129_GPIO		PIN_CFG(129, GPIO)
-#define GPIO129_KP_O0		PIN_CFG(129, ALT_A)
-#define GPIO129_BUSMON_D1	PIN_CFG(129, ALT_B)
-
-#define GPIO130_GPIO		PIN_CFG(130, GPIO)
-#define GPIO130_KP_I1		PIN_CFG(130, ALT_A)
-#define GPIO130_BUSMON_D2	PIN_CFG(130, ALT_B)
-
-#define GPIO131_GPIO		PIN_CFG(131, GPIO)
-#define GPIO131_KP_O1		PIN_CFG(131, ALT_A)
-#define GPIO131_BUSMON_D3	PIN_CFG(131, ALT_B)
-
-#define GPIO132_GPIO		PIN_CFG(132, GPIO)
-#define GPIO132_KP_I2		PIN_CFG(132, ALT_A)
-#define GPIO132_ETM_D15		PIN_CFG(132, ALT_B)
-#define GPIO132_STMAPE_CLK	PIN_CFG(132, ALT_C)
-
-#define GPIO133_GPIO		PIN_CFG(133, GPIO)
-#define GPIO133_KP_O2		PIN_CFG(133, ALT_A)
-#define GPIO133_ETM_D14		PIN_CFG(133, ALT_B)
-#define GPIO133_U0_RXD		PIN_CFG(133, ALT_C)
-
-#define GPIO134_GPIO		PIN_CFG(134, GPIO)
-#define GPIO134_KP_I3		PIN_CFG(134, ALT_A)
-#define GPIO134_ETM_D13		PIN_CFG(134, ALT_B)
-#define GPIO134_STMAPE_DAT0	PIN_CFG(134, ALT_C)
-
-#define GPIO135_GPIO		PIN_CFG(135, GPIO)
-#define GPIO135_KP_O3		PIN_CFG(135, ALT_A)
-#define GPIO135_ETM_D12		PIN_CFG(135, ALT_B)
-#define GPIO135_STMAPE_DAT1	PIN_CFG(135, ALT_C)
-
-#define GPIO136_GPIO		PIN_CFG(136, GPIO)
-#define GPIO136_KP_I4		PIN_CFG(136, ALT_A)
-#define GPIO136_ETM_D11		PIN_CFG(136, ALT_B)
-#define GPIO136_STMAPE_DAT2	PIN_CFG(136, ALT_C)
-
-#define GPIO137_GPIO		PIN_CFG(137, GPIO)
-#define GPIO137_KP_O4		PIN_CFG(137, ALT_A)
-#define GPIO137_ETM_D10		PIN_CFG(137, ALT_B)
-#define GPIO137_STMAPE_DAT3	PIN_CFG(137, ALT_C)
-
-#define GPIO138_GPIO		PIN_CFG(138, GPIO)
-#define GPIO138_KP_I5		PIN_CFG(138, ALT_A)
-#define GPIO138_ETM_D9		PIN_CFG(138, ALT_B)
-#define GPIO138_U0_TXD		PIN_CFG(138, ALT_C)
-
-#define GPIO139_GPIO		PIN_CFG(139, GPIO)
-#define GPIO139_KP_O5		PIN_CFG(139, ALT_A)
-#define GPIO139_ETM_D8		PIN_CFG(139, ALT_B)
-#define GPIO139_BUSMON_D11	PIN_CFG(139, ALT_C)
-
-#define GPIO140_GPIO		PIN_CFG(140, GPIO)
-#define GPIO140_KP_I6		PIN_CFG(140, ALT_A)
-#define GPIO140_ETM_D7		PIN_CFG(140, ALT_B)
-#define GPIO140_STMAPE_CLK	PIN_CFG(140, ALT_C)
-
-#define GPIO141_GPIO		PIN_CFG(141, GPIO)
-#define GPIO141_KP_O6		PIN_CFG(141, ALT_A)
-#define GPIO141_ETM_D6		PIN_CFG(141, ALT_B)
-#define GPIO141_U0_RXD		PIN_CFG(141, ALT_C)
-
-#define GPIO142_GPIO		PIN_CFG(142, GPIO)
-#define GPIO142_KP_I7		PIN_CFG(142, ALT_A)
-#define GPIO142_ETM_D5		PIN_CFG(142, ALT_B)
-#define GPIO142_STMAPE_DAT0	PIN_CFG(142, ALT_C)
-
-#define GPIO143_GPIO		PIN_CFG(143, GPIO)
-#define GPIO143_KP_O7		PIN_CFG(143, ALT_A)
-#define GPIO143_ETM_D4		PIN_CFG(143, ALT_B)
-#define GPIO143_STMAPE_DAT1	PIN_CFG(143, ALT_C)
-
-#define GPIO144_GPIO		PIN_CFG(144, GPIO)
-#define GPIO144_I2C3_SCL	PIN_CFG(144, ALT_A)
-#define GPIO144_ETM_D3		PIN_CFG(144, ALT_B)
-#define GPIO144_STMAPE_DAT2	PIN_CFG(144, ALT_C)
-
-#define GPIO145_GPIO		PIN_CFG(145, GPIO)
-#define GPIO145_I2C3_SDA	PIN_CFG(145, ALT_A)
-#define GPIO145_ETM_D2		PIN_CFG(145, ALT_B)
-#define GPIO145_STMAPE_DAT3	PIN_CFG(145, ALT_C)
-
-#define GPIO146_GPIO		PIN_CFG(146, GPIO)
-#define GPIO146_PWM_0		PIN_CFG(146, ALT_A)
-#define GPIO146_ETM_D1		PIN_CFG(146, ALT_B)
-
-#define GPIO147_GPIO		PIN_CFG(147, GPIO)
-#define GPIO147_PWM_1		PIN_CFG(147, ALT_A)
-#define GPIO147_ETM_D0		PIN_CFG(147, ALT_B)
-
-#define GPIO148_GPIO		PIN_CFG(148, GPIO)
-#define GPIO148_PWM_2		PIN_CFG(148, ALT_A)
-#define GPIO148_ETM_CLK		PIN_CFG(148, ALT_B)
-
-#define GPIO160_GPIO		PIN_CFG(160, GPIO)
-#define GPIO160_CLKOUT_REQn	PIN_CFG(160, ALT_A)
-
-#define GPIO161_GPIO		PIN_CFG(161, GPIO)
-#define GPIO161_CLKOUT_0	PIN_CFG(161, ALT_A)
-
-#define GPIO162_GPIO		PIN_CFG(162, GPIO)
-#define GPIO162_CLKOUT_1	PIN_CFG(162, ALT_A)
-
-#define GPIO163_GPIO		PIN_CFG(163, GPIO)
-
-#define GPIO164_GPIO		PIN_CFG(164, GPIO)
-#define GPIO164_GPS_START	PIN_CFG(164, ALT_A)
-
-#define GPIO165_GPIO		PIN_CFG(165, GPIO)
-#define GPIO165_SPI1_CS2n	PIN_CFG(165, ALT_A)
-#define GPIO165_U3_RXD		PIN_CFG(165, ALT_B)
-#define GPIO165_BUSMON_D20	PIN_CFG(165, ALT_C)
-
-#define GPIO166_GPIO		PIN_CFG(166, GPIO)
-#define GPIO166_SPI1_CS1n	PIN_CFG(166, ALT_A)
-#define GPIO166_U3_TXD		PIN_CFG(166, ALT_B)
-#define GPIO166_BUSMON_D21	PIN_CFG(166, ALT_C)
-
-#define GPIO167_GPIO		PIN_CFG(167, GPIO)
-#define GPIO167_SPI1_CS0n	PIN_CFG(167, ALT_A)
-#define GPIO167_U3_RTSn		PIN_CFG(167, ALT_B)
-#define GPIO167_BUSMON_D22	PIN_CFG(167, ALT_C)
-
-#define GPIO168_GPIO		PIN_CFG(168, GPIO)
-#define GPIO168_SPI1_RXD	PIN_CFG(168, ALT_A)
-#define GPIO168_U3_CTSn		PIN_CFG(168, ALT_B)
-#define GPIO168_BUSMON_D23	PIN_CFG(168, ALT_C)
-
-#define GPIO169_GPIO		PIN_CFG(169, GPIO)
-#define GPIO169_SPI1_TXD	PIN_CFG(169, ALT_A)
-#define GPIO169_DDR_RC		PIN_CFG(169, ALT_B)
-#define GPIO169_BUSMON_D24	PIN_CFG(169, ALT_C)
-
-#define GPIO170_GPIO		PIN_CFG(170, GPIO)
-#define GPIO170_SPI1_CLK	PIN_CFG(170, ALT_A)
-
-#define GPIO171_GPIO		PIN_CFG(171, GPIO)
-#define GPIO171_MC3_DAT0	PIN_CFG(171, ALT_A)
-#define GPIO171_SPI3_RXD	PIN_CFG(171, ALT_B)
-#define GPIO171_BUSMON_D25	PIN_CFG(171, ALT_C)
-
-#define GPIO172_GPIO		PIN_CFG(172, GPIO)
-#define GPIO172_MC3_DAT1	PIN_CFG(172, ALT_A)
-#define GPIO172_SPI3_CS1n	PIN_CFG(172, ALT_B)
-#define GPIO172_BUSMON_D26	PIN_CFG(172, ALT_C)
-
-#define GPIO173_GPIO		PIN_CFG(173, GPIO)
-#define GPIO173_MC3_DAT2	PIN_CFG(173, ALT_A)
-#define GPIO173_SPI3_CS2n	PIN_CFG(173, ALT_B)
-#define GPIO173_BUSMON_D27	PIN_CFG(173, ALT_C)
-
-#define GPIO174_GPIO		PIN_CFG(174, GPIO)
-#define GPIO174_MC3_DAT3	PIN_CFG(174, ALT_A)
-#define GPIO174_SPI3_CS0n	PIN_CFG(174, ALT_B)
-#define GPIO174_BUSMON_D28	PIN_CFG(174, ALT_C)
-
-#define GPIO175_GPIO		PIN_CFG(175, GPIO)
-#define GPIO175_MC3_CMD		PIN_CFG(175, ALT_A)
-#define GPIO175_SPI3_TXD	PIN_CFG(175, ALT_B)
-#define GPIO175_BUSMON_D29	PIN_CFG(175, ALT_C)
-
-#define GPIO176_GPIO		PIN_CFG(176, GPIO)
-#define GPIO176_MC3_CLK		PIN_CFG(176, ALT_A)
-#define GPIO176_SPI3_CLK	PIN_CFG(176, ALT_B)
-
-#define GPIO177_GPIO		PIN_CFG(177, GPIO)
-#define GPIO177_U2_RXD		PIN_CFG(177, ALT_A)
-#define GPIO177_I2C3_SCL	PIN_CFG(177, ALT_B)
-#define GPIO177_BUSMON_D30	PIN_CFG(177, ALT_C)
-
-#define GPIO178_GPIO		PIN_CFG(178, GPIO)
-#define GPIO178_U2_TXD		PIN_CFG(178, ALT_A)
-#define GPIO178_I2C3_SDA	PIN_CFG(178, ALT_B)
-#define GPIO178_BUSMON_D31	PIN_CFG(178, ALT_C)
-
-#define GPIO179_GPIO		PIN_CFG(179, GPIO)
-#define GPIO179_U2_CTSn		PIN_CFG(179, ALT_A)
-#define GPIO179_U3_RXD		PIN_CFG(179, ALT_B)
-#define GPIO179_BUSMON_D32	PIN_CFG(179, ALT_C)
-
-#define GPIO180_GPIO		PIN_CFG(180, GPIO)
-#define GPIO180_U2_RTSn		PIN_CFG(180, ALT_A)
-#define GPIO180_U3_TXD		PIN_CFG(180, ALT_B)
-#define GPIO180_BUSMON_D33	PIN_CFG(180, ALT_C)
-
-#define GPIO185_GPIO		PIN_CFG(185, GPIO)
-#define GPIO185_SPI3_CS2n	PIN_CFG(185, ALT_A)
-#define GPIO185_MC4_DAT0	PIN_CFG(185, ALT_B)
-
-#define GPIO186_GPIO		PIN_CFG(186, GPIO)
-#define GPIO186_SPI3_CS1n	PIN_CFG(186, ALT_A)
-#define GPIO186_MC4_DAT1	PIN_CFG(186, ALT_B)
-
-#define GPIO187_GPIO		PIN_CFG(187, GPIO)
-#define GPIO187_SPI3_CS0n	PIN_CFG(187, ALT_A)
-#define GPIO187_MC4_DAT2	PIN_CFG(187, ALT_B)
-
-#define GPIO188_GPIO		PIN_CFG(188, GPIO)
-#define GPIO188_SPI3_RXD	PIN_CFG(188, ALT_A)
-#define GPIO188_MC4_DAT3	PIN_CFG(188, ALT_B)
-
-#define GPIO189_GPIO		PIN_CFG(189, GPIO)
-#define GPIO189_SPI3_TXD	PIN_CFG(189, ALT_A)
-#define GPIO189_MC4_CMD		PIN_CFG(189, ALT_B)
-
-#define GPIO190_GPIO		PIN_CFG(190, GPIO)
-#define GPIO190_SPI3_CLK	PIN_CFG(190, ALT_A)
-#define GPIO190_MC4_CLK		PIN_CFG(190, ALT_B)
-
-#define GPIO191_GPIO		PIN_CFG(191, GPIO)
-#define GPIO191_MC1_DAT0	PIN_CFG(191, ALT_A)
-#define GPIO191_MC4_DAT4	PIN_CFG(191, ALT_B)
-#define GPIO191_STMAPE_DAT0	PIN_CFG(191, ALT_C)
-
-#define GPIO192_GPIO		PIN_CFG(192, GPIO)
-#define GPIO192_MC1_DAT1	PIN_CFG(192, ALT_A)
-#define GPIO192_MC4_DAT5	PIN_CFG(192, ALT_B)
-#define GPIO192_STMAPE_DAT1	PIN_CFG(192, ALT_C)
-
-#define GPIO193_GPIO		PIN_CFG(193, GPIO)
-#define GPIO193_MC1_DAT2	PIN_CFG(193, ALT_A)
-#define GPIO193_MC4_DAT6	PIN_CFG(193, ALT_B)
-#define GPIO193_STMAPE_DAT2	PIN_CFG(193, ALT_C)
-
-#define GPIO194_GPIO		PIN_CFG(194, GPIO)
-#define GPIO194_MC1_DAT3	PIN_CFG(194, ALT_A)
-#define GPIO194_MC4_DAT7	PIN_CFG(194, ALT_B)
-#define GPIO194_STMAPE_DAT3	PIN_CFG(194, ALT_C)
-
-#define GPIO195_GPIO		PIN_CFG(195, GPIO)
-#define GPIO195_MC1_CLK		PIN_CFG(195, ALT_A)
-#define GPIO195_STMAPE_CLK	PIN_CFG(195, ALT_B)
-#define GPIO195_BUSMON_CLK	PIN_CFG(195, ALT_C)
-
-#define GPIO196_GPIO		PIN_CFG(196, GPIO)
-#define GPIO196_MC1_CMD		PIN_CFG(196, ALT_A)
-#define GPIO196_U0_RXD		PIN_CFG(196, ALT_B)
-#define GPIO196_BUSMON_D38	PIN_CFG(196, ALT_C)
-
-#define GPIO197_GPIO		PIN_CFG(197, GPIO)
-#define GPIO197_MC1_CMDDIR	PIN_CFG(197, ALT_A)
-#define GPIO197_BUSMON_D39	PIN_CFG(197, ALT_B)
-
-#define GPIO198_GPIO		PIN_CFG(198, GPIO)
-#define GPIO198_MC1_FBCLK	PIN_CFG(198, ALT_A)
-
-#define GPIO199_GPIO		PIN_CFG(199, GPIO)
-#define GPIO199_MC1_DAT0DIR	PIN_CFG(199, ALT_A)
-#define GPIO199_BUSMON_D40	PIN_CFG(199, ALT_B)
-
-#define GPIO200_GPIO		PIN_CFG(200, GPIO)
-#define GPIO200_U1_TXD		PIN_CFG(200, ALT_A)
-#define GPIO200_ACCU0_RTSn	PIN_CFG(200, ALT_B)
-
-#define GPIO201_GPIO		PIN_CFG(201, GPIO)
-#define GPIO201_U1_RXD		PIN_CFG(201, ALT_A)
-#define GPIO201_ACCU0_CTSn	PIN_CFG(201, ALT_B)
-
-#define GPIO202_GPIO		PIN_CFG(202, GPIO)
-#define GPIO202_U1_CTSn		PIN_CFG(202, ALT_A)
-#define GPIO202_ACCU0_RXD	PIN_CFG(202, ALT_B)
-
-#define GPIO203_GPIO		PIN_CFG(203, GPIO)
-#define GPIO203_U1_RTSn		PIN_CFG(203, ALT_A)
-#define GPIO203_ACCU0_TXD	PIN_CFG(203, ALT_B)
-
-#define GPIO204_GPIO		PIN_CFG(204, GPIO)
-#define GPIO204_SPI0_CS2n	PIN_CFG(204, ALT_A)
-#define GPIO204_ACCGPIO_000	PIN_CFG(204, ALT_B)
-#define GPIO204_LCD_VSI1	PIN_CFG(204, ALT_C)
-
-#define GPIO205_GPIO		PIN_CFG(205, GPIO)
-#define GPIO205_SPI0_CS1n	PIN_CFG(205, ALT_A)
-#define GPIO205_ACCGPIO_001	PIN_CFG(205, ALT_B)
-#define GPIO205_LCD_D3		PIN_CFG(205, ALT_C)
-
-#define GPIO206_GPIO		PIN_CFG(206, GPIO)
-#define GPIO206_SPI0_CS0n	PIN_CFG(206, ALT_A)
-#define GPIO206_ACCGPIO_002	PIN_CFG(206, ALT_B)
-#define GPIO206_LCD_D2		PIN_CFG(206, ALT_C)
-
-#define GPIO207_GPIO		PIN_CFG(207, GPIO)
-#define GPIO207_SPI0_RXD	PIN_CFG(207, ALT_A)
-#define GPIO207_ACCGPIO_003	PIN_CFG(207, ALT_B)
-#define GPIO207_LCD_D1		PIN_CFG(207, ALT_C)
-
-#define GPIO208_GPIO		PIN_CFG(208, GPIO)
-#define GPIO208_SPI0_TXD	PIN_CFG(208, ALT_A)
-#define GPIO208_ACCGPIO_004	PIN_CFG(208, ALT_B)
-#define GPIO208_LCD_D0		PIN_CFG(208, ALT_C)
-
-#define GPIO209_GPIO		PIN_CFG(209, GPIO)
-#define GPIO209_SPI0_CLK	PIN_CFG(209, ALT_A)
-#define GPIO209_ACCGPIO_005	PIN_CFG(209, ALT_B)
-#define GPIO209_LCD_CLK		PIN_CFG(209, ALT_C)
-
-#define GPIO210_GPIO		PIN_CFG(210, GPIO)
-#define GPIO210_LCD_VSO		PIN_CFG(210, ALT_A)
-#define GPIO210_PRCMU_PWRCTRL1	PIN_CFG(210, ALT_B)
-
-#define GPIO211_GPIO		PIN_CFG(211, GPIO)
-#define GPIO211_LCD_VSI0	PIN_CFG(211, ALT_A)
-#define GPIO211_PRCMU_PWRCTRL2	PIN_CFG(211, ALT_B)
-
-#define GPIO212_GPIO		PIN_CFG(212, GPIO)
-#define GPIO212_SPI2_CS2n	PIN_CFG(212, ALT_A)
-#define GPIO212_LCD_HSO		PIN_CFG(212, ALT_B)
-
-#define GPIO213_GPIO		PIN_CFG(213, GPIO)
-#define GPIO213_SPI2_CS1n	PIN_CFG(213, ALT_A)
-#define GPIO213_LCD_DE		PIN_CFG(213, ALT_B)
-#define GPIO213_BUSMON_D16	PIN_CFG(213, ALT_C)
-
-#define GPIO214_GPIO		PIN_CFG(214, GPIO)
-#define GPIO214_SPI2_CS0n	PIN_CFG(214, ALT_A)
-#define GPIO214_LCD_D7		PIN_CFG(214, ALT_B)
-#define GPIO214_BUSMON_D17	PIN_CFG(214, ALT_C)
-
-#define GPIO215_GPIO		PIN_CFG(215, GPIO)
-#define GPIO215_SPI2_RXD	PIN_CFG(215, ALT_A)
-#define GPIO215_LCD_D6		PIN_CFG(215, ALT_B)
-#define GPIO215_BUSMON_D18	PIN_CFG(215, ALT_C)
-
-#define GPIO216_GPIO		PIN_CFG(216, GPIO)
-#define GPIO216_SPI2_CLK	PIN_CFG(216, ALT_A)
-#define GPIO216_LCD_D5		PIN_CFG(216, ALT_B)
-
-#define GPIO217_GPIO		PIN_CFG(217, GPIO)
-#define GPIO217_SPI2_TXD	PIN_CFG(217, ALT_A)
-#define GPIO217_LCD_D4		PIN_CFG(217, ALT_B)
-#define GPIO217_BUSMON_D19	PIN_CFG(217, ALT_C)
-
-#define GPIO218_GPIO		PIN_CFG(218, GPIO)
-#define GPIO218_I2C2_SCL	PIN_CFG(218, ALT_A)
-#define GPIO218_LCD_VSO		PIN_CFG(218, ALT_B)
-
-#define GPIO219_GPIO		PIN_CFG(219, GPIO)
-#define GPIO219_I2C2_SDA	PIN_CFG(219, ALT_A)
-#define GPIO219_LCD_D3		PIN_CFG(219, ALT_B)
-
-#define GPIO220_GPIO		PIN_CFG(220, GPIO)
-#define GPIO220_MSP2_TCK	PIN_CFG(220, ALT_A)
-#define GPIO220_LCD_D2		PIN_CFG(220, ALT_B)
-
-#define GPIO221_GPIO		PIN_CFG(221, GPIO)
-#define GPIO221_MSP2_TFS	PIN_CFG(221, ALT_A)
-#define GPIO221_LCD_D1		PIN_CFG(221, ALT_B)
-
-#define GPIO222_GPIO		PIN_CFG(222, GPIO)
-#define GPIO222_MSP2_TXD	PIN_CFG(222, ALT_A)
-#define GPIO222_LCD_D0		PIN_CFG(222, ALT_B)
-
-#define GPIO223_GPIO		PIN_CFG(223, GPIO)
-#define GPIO223_MSP2_RXD	PIN_CFG(223, ALT_A)
-#define GPIO223_LCD_CLK		PIN_CFG(223, ALT_B)
-
-#define GPIO224_GPIO		PIN_CFG(224, GPIO)
-#define GPIO224_PRCMU_PWRCTRL0	PIN_CFG(224, ALT_A)
-#define GPIO224_LCD_VSI1	PIN_CFG(224, ALT_B)
-
-#define GPIO225_GPIO		PIN_CFG(225, GPIO)
-#define GPIO225_PRCMU_PWRCTRL1	PIN_CFG(225, ALT_A)
-#define GPIO225_IRDA_RXD	PIN_CFG(225, ALT_B)
-
-#define GPIO226_GPIO		PIN_CFG(226, GPIO)
-#define GPIO226_PRCMU_PWRCTRL2	PIN_CFG(226, ALT_A)
-#define GPIO226_IRRC_DAT	PIN_CFG(226, ALT_B)
-
-#define GPIO227_GPIO		PIN_CFG(227, GPIO)
-#define GPIO227_IRRC_DAT	PIN_CFG(227, ALT_A)
-#define GPIO227_IRDA_TXD	PIN_CFG(227, ALT_B)
-
-#endif
diff --git a/arch/arm/mach-ux500/pins-db8500.h b/arch/arm/mach-ux500/pins-db8500.h
index 8b1d1a7a679e..062c7acf4576 100644
--- a/arch/arm/mach-ux500/pins-db8500.h
+++ b/arch/arm/mach-ux500/pins-db8500.h
@@ -35,40 +35,40 @@
 
 #define GPIO4_GPIO		PIN_CFG(4, GPIO)
 #define GPIO4_U1_RXD		PIN_CFG(4, ALT_A)
-#define GPIO4_I2C4_SCL		PIN_CFG_INPUT(4, ALT_B, PULLUP)
+#define GPIO4_I2C4_SCL		PIN_CFG(4, ALT_B)
 #define GPIO4_IP_TRSTn		PIN_CFG(4, ALT_C)
 
 #define GPIO5_GPIO		PIN_CFG(5, GPIO)
 #define GPIO5_U1_TXD		PIN_CFG(5, ALT_A)
-#define GPIO5_I2C4_SDA		PIN_CFG_INPUT(5, ALT_B, PULLUP)
+#define GPIO5_I2C4_SDA		PIN_CFG(5, ALT_B)
 #define GPIO5_IP_GPIO6		PIN_CFG(5, ALT_C)
 
 #define GPIO6_GPIO		PIN_CFG(6, GPIO)
 #define GPIO6_U1_CTSn		PIN_CFG(6, ALT_A)
-#define GPIO6_I2C1_SCL		PIN_CFG_INPUT(6, ALT_B, PULLUP)
+#define GPIO6_I2C1_SCL		PIN_CFG(6, ALT_B)
 #define GPIO6_IP_GPIO0		PIN_CFG(6, ALT_C)
 
 #define GPIO7_GPIO		PIN_CFG(7, GPIO)
 #define GPIO7_U1_RTSn		PIN_CFG(7, ALT_A)
-#define GPIO7_I2C1_SDA		PIN_CFG_INPUT(7, ALT_B, PULLUP)
+#define GPIO7_I2C1_SDA		PIN_CFG(7, ALT_B)
 #define GPIO7_IP_GPIO1		PIN_CFG(7, ALT_C)
 
 #define GPIO8_GPIO		PIN_CFG(8, GPIO)
-#define GPIO8_IPI2C_SDA		PIN_CFG_INPUT(8, ALT_A, PULLUP)
-#define GPIO8_I2C2_SDA		PIN_CFG_INPUT(8, ALT_B, PULLUP)
+#define GPIO8_IPI2C_SDA		PIN_CFG(8, ALT_A)
+#define GPIO8_I2C2_SDA		PIN_CFG(8, ALT_B)
 
 #define GPIO9_GPIO		PIN_CFG(9, GPIO)
-#define GPIO9_IPI2C_SCL		PIN_CFG_INPUT(9, ALT_A, PULLUP)
-#define GPIO9_I2C2_SCL		PIN_CFG_INPUT(9, ALT_B, PULLUP)
+#define GPIO9_IPI2C_SCL		PIN_CFG(9, ALT_A)
+#define GPIO9_I2C2_SCL		PIN_CFG(9, ALT_B)
 
 #define GPIO10_GPIO		PIN_CFG(10, GPIO)
-#define GPIO10_IPI2C_SDA	PIN_CFG_INPUT(10, ALT_A, PULLUP)
-#define GPIO10_I2C2_SDA		PIN_CFG_INPUT(10, ALT_B, PULLUP)
+#define GPIO10_IPI2C_SDA	PIN_CFG(10, ALT_A)
+#define GPIO10_I2C2_SDA		PIN_CFG(10, ALT_B)
 #define GPIO10_IP_GPIO3		PIN_CFG(10, ALT_C)
 
 #define GPIO11_GPIO		PIN_CFG(11, GPIO)
-#define GPIO11_IPI2C_SCL	PIN_CFG_INPUT(11, ALT_A, PULLUP)
-#define GPIO11_I2C2_SCL		PIN_CFG_INPUT(11, ALT_B, PULLUP)
+#define GPIO11_IPI2C_SCL	PIN_CFG(11, ALT_A)
+#define GPIO11_I2C2_SCL		PIN_CFG(11, ALT_B)
 #define GPIO11_IP_GPIO2		PIN_CFG(11, ALT_C)
 
 #define GPIO12_GPIO		PIN_CFG(12, GPIO)
@@ -87,12 +87,12 @@
 
 #define GPIO16_GPIO		PIN_CFG(16, GPIO)
 #define GPIO16_MSP0_RFS		PIN_CFG(16, ALT_A)
-#define GPIO16_I2C1_SCL		PIN_CFG_INPUT(16, ALT_B, PULLUP)
+#define GPIO16_I2C1_SCL		PIN_CFG(16, ALT_B)
 #define GPIO16_SLIM0_DAT	PIN_CFG(16, ALT_C)
 
 #define GPIO17_GPIO		PIN_CFG(17, GPIO)
 #define GPIO17_MSP0_RCK		PIN_CFG(17, ALT_A)
-#define GPIO17_I2C1_SDA		PIN_CFG_INPUT(17, ALT_B, PULLUP)
+#define GPIO17_I2C1_SDA		PIN_CFG(17, ALT_B)
 #define GPIO17_SLIM0_CLK	PIN_CFG(17, ALT_C)
 
 #define GPIO18_GPIO		PIN_CFG(18, GPIO)
@@ -434,10 +434,10 @@
 #define GPIO146_SSP0_TXD	PIN_CFG(146, ALT_A)
 
 #define GPIO147_GPIO		PIN_CFG(147, GPIO)
-#define GPIO147_I2C0_SCL	PIN_CFG_INPUT(147, ALT_A, PULLUP)
+#define GPIO147_I2C0_SCL	PIN_CFG(147, ALT_A)
 
 #define GPIO148_GPIO		PIN_CFG(148, GPIO)
-#define GPIO148_I2C0_SDA	PIN_CFG_INPUT(148, ALT_A, PULLUP)
+#define GPIO148_I2C0_SDA	PIN_CFG(148, ALT_A)
 
 #define GPIO149_GPIO		PIN_CFG(149, GPIO)
 #define GPIO149_IP_GPIO0	PIN_CFG(149, ALT_A)
@@ -459,82 +459,82 @@
 #define GPIO152_KP_O9		PIN_CFG(152, ALT_C)
 
 #define GPIO153_GPIO		PIN_CFG(153, GPIO)
-#define GPIO153_KP_I7		PIN_CFG_INPUT(153, ALT_A, PULLDOWN)
+#define GPIO153_KP_I7		PIN_CFG(153, ALT_A)
 #define GPIO153_LCD_D24		PIN_CFG(153, ALT_B)
 #define GPIO153_U2_RXD		PIN_CFG(153, ALT_C)
 
 #define GPIO154_GPIO		PIN_CFG(154, GPIO)
-#define GPIO154_KP_I6		PIN_CFG_INPUT(154, ALT_A, PULLDOWN)
+#define GPIO154_KP_I6		PIN_CFG(154, ALT_A)
 #define GPIO154_LCD_D25		PIN_CFG(154, ALT_B)
 #define GPIO154_U2_TXD		PIN_CFG(154, ALT_C)
 
 #define GPIO155_GPIO		PIN_CFG(155, GPIO)
-#define GPIO155_KP_I5		PIN_CFG_INPUT(155, ALT_A, PULLDOWN)
+#define GPIO155_KP_I5		PIN_CFG(155, ALT_A)
 #define GPIO155_LCD_D26		PIN_CFG(155, ALT_B)
 #define GPIO155_STMAPE_CLK	PIN_CFG(155, ALT_C)
 
 #define GPIO156_GPIO		PIN_CFG(156, GPIO)
-#define GPIO156_KP_I4		PIN_CFG_INPUT(156, ALT_A, PULLDOWN)
+#define GPIO156_KP_I4		PIN_CFG(156, ALT_A)
 #define GPIO156_LCD_D27		PIN_CFG(156, ALT_B)
 #define GPIO156_STMAPE_DAT3	PIN_CFG(156, ALT_C)
 
 #define GPIO157_GPIO		PIN_CFG(157, GPIO)
-#define GPIO157_KP_O7		PIN_CFG_INPUT(157, ALT_A, PULLUP)
+#define GPIO157_KP_O7		PIN_CFG(157, ALT_A)
 #define GPIO157_LCD_D28		PIN_CFG(157, ALT_B)
 #define GPIO157_STMAPE_DAT2	PIN_CFG(157, ALT_C)
 
 #define GPIO158_GPIO		PIN_CFG(158, GPIO)
-#define GPIO158_KP_O6		PIN_CFG_INPUT(158, ALT_A, PULLUP)
+#define GPIO158_KP_O6		PIN_CFG(158, ALT_A)
 #define GPIO158_LCD_D29		PIN_CFG(158, ALT_B)
 #define GPIO158_STMAPE_DAT1	PIN_CFG(158, ALT_C)
 
 #define GPIO159_GPIO		PIN_CFG(159, GPIO)
-#define GPIO159_KP_O5		PIN_CFG_INPUT(159, ALT_A, PULLUP)
+#define GPIO159_KP_O5		PIN_CFG(159, ALT_A)
 #define GPIO159_LCD_D30		PIN_CFG(159, ALT_B)
 #define GPIO159_STMAPE_DAT0	PIN_CFG(159, ALT_C)
 
 #define GPIO160_GPIO		PIN_CFG(160, GPIO)
-#define GPIO160_KP_O4		PIN_CFG_INPUT(160, ALT_A, PULLUP)
+#define GPIO160_KP_O4		PIN_CFG(160, ALT_A)
 #define GPIO160_LCD_D31		PIN_CFG(160, ALT_B)
 #define GPIO160_NONE		PIN_CFG(160, ALT_C)
 
 #define GPIO161_GPIO		PIN_CFG(161, GPIO)
-#define GPIO161_KP_I3		PIN_CFG_INPUT(161, ALT_A, PULLDOWN)
+#define GPIO161_KP_I3		PIN_CFG(161, ALT_A)
 #define GPIO161_LCD_D32		PIN_CFG(161, ALT_B)
 #define GPIO161_UARTMOD_RXD	PIN_CFG(161, ALT_C)
 
 #define GPIO162_GPIO		PIN_CFG(162, GPIO)
-#define GPIO162_KP_I2		PIN_CFG_INPUT(162, ALT_A, PULLDOWN)
+#define GPIO162_KP_I2		PIN_CFG(162, ALT_A)
 #define GPIO162_LCD_D33		PIN_CFG(162, ALT_B)
 #define GPIO162_UARTMOD_TXD	PIN_CFG(162, ALT_C)
 
 #define GPIO163_GPIO		PIN_CFG(163, GPIO)
-#define GPIO163_KP_I1		PIN_CFG_INPUT(163, ALT_A, PULLDOWN)
+#define GPIO163_KP_I1		PIN_CFG(163, ALT_A)
 #define GPIO163_LCD_D34		PIN_CFG(163, ALT_B)
 #define GPIO163_STMMOD_CLK	PIN_CFG(163, ALT_C)
 
 #define GPIO164_GPIO		PIN_CFG(164, GPIO)
-#define GPIO164_KP_I0		PIN_CFG_INPUT(164, ALT_A, PULLUP)
+#define GPIO164_KP_I0		PIN_CFG(164, ALT_A)
 #define GPIO164_LCD_D35		PIN_CFG(164, ALT_B)
 #define GPIO164_STMMOD_DAT3	PIN_CFG(164, ALT_C)
 
 #define GPIO165_GPIO		PIN_CFG(165, GPIO)
-#define GPIO165_KP_O3		PIN_CFG_INPUT(165, ALT_A, PULLUP)
+#define GPIO165_KP_O3		PIN_CFG(165, ALT_A)
 #define GPIO165_LCD_D36		PIN_CFG(165, ALT_B)
 #define GPIO165_STMMOD_DAT2	PIN_CFG(165, ALT_C)
 
 #define GPIO166_GPIO		PIN_CFG(166, GPIO)
-#define GPIO166_KP_O2		PIN_CFG_INPUT(166, ALT_A, PULLUP)
+#define GPIO166_KP_O2		PIN_CFG(166, ALT_A)
 #define GPIO166_LCD_D37		PIN_CFG(166, ALT_B)
 #define GPIO166_STMMOD_DAT1	PIN_CFG(166, ALT_C)
 
 #define GPIO167_GPIO		PIN_CFG(167, GPIO)
-#define GPIO167_KP_O1		PIN_CFG_INPUT(167, ALT_A, PULLUP)
+#define GPIO167_KP_O1		PIN_CFG(167, ALT_A)
 #define GPIO167_LCD_D38		PIN_CFG(167, ALT_B)
 #define GPIO167_STMMOD_DAT0	PIN_CFG(167, ALT_C)
 
 #define GPIO168_GPIO		PIN_CFG(168, GPIO)
-#define GPIO168_KP_O0		PIN_CFG_INPUT(168, ALT_A, PULLUP)
+#define GPIO168_KP_O0		PIN_CFG(168, ALT_A)
 #define GPIO168_LCD_D39		PIN_CFG(168, ALT_B)
 #define GPIO168_NONE		PIN_CFG(168, ALT_C)
 
@@ -637,7 +637,7 @@
 #define GPIO216_GPIO		PIN_CFG(216, GPIO)
 #define GPIO216_MC1_DAT2DIR	PIN_CFG(216, ALT_A)
 #define GPIO216_MC3_CMDDIR	PIN_CFG(216, ALT_B)
-#define GPIO216_I2C3_SDA	PIN_CFG_INPUT(216, ALT_C, PULLUP)
+#define GPIO216_I2C3_SDA	PIN_CFG(216, ALT_C)
 #define GPIO216_SPI2_FRM	PIN_CFG(216, ALT_C)
 
 #define GPIO217_GPIO		PIN_CFG(217, GPIO)
@@ -649,7 +649,7 @@
 #define GPIO218_GPIO		PIN_CFG(218, GPIO)
 #define GPIO218_MC1_DAT31DIR	PIN_CFG(218, ALT_A)
 #define GPIO218_MC3_DAT0DIR	PIN_CFG(218, ALT_B)
-#define GPIO218_I2C3_SCL	PIN_CFG_INPUT(218, ALT_C, PULLUP)
+#define GPIO218_I2C3_SCL	PIN_CFG(218, ALT_C)
 #define GPIO218_SPI2_RXD	PIN_CFG(218, ALT_C)
 
 #define GPIO219_GPIO		PIN_CFG(219, GPIO)
@@ -698,12 +698,12 @@
 #define GPIO229_GPIO		PIN_CFG(229, GPIO)
 #define GPIO229_CLKOUT1		PIN_CFG(229, ALT_A)
 #define GPIO229_PWL		PIN_CFG(229, ALT_B)
-#define GPIO229_I2C3_SDA	PIN_CFG_INPUT(229, ALT_C, PULLUP)
+#define GPIO229_I2C3_SDA	PIN_CFG(229, ALT_C)
 
 #define GPIO230_GPIO		PIN_CFG(230, GPIO)
 #define GPIO230_CLKOUT2		PIN_CFG(230, ALT_A)
 #define GPIO230_PWL		PIN_CFG(230, ALT_B)
-#define GPIO230_I2C3_SCL	PIN_CFG_INPUT(230, ALT_C, PULLUP)
+#define GPIO230_I2C3_SCL	PIN_CFG(230, ALT_C)
 
 #define GPIO256_GPIO		PIN_CFG(256, GPIO)
 #define GPIO256_USB_NXT		PIN_CFG(256, ALT_A)
diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c
index d2058ef8345f..da1d5ad5bd45 100644
--- a/arch/arm/mach-ux500/platsmp.c
+++ b/arch/arm/mach-ux500/platsmp.c
@@ -48,9 +48,7 @@ static void write_pen_release(int val)
 
 static void __iomem *scu_base_addr(void)
 {
-	if (cpu_is_u5500())
-		return __io_address(U5500_SCU_BASE);
-	else if (cpu_is_u8500())
+	if (cpu_is_u8500_family())
 		return __io_address(U8500_SCU_BASE);
 	else
 		ux500_unknown_soc();
@@ -99,7 +97,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 	 */
 	write_pen_release(cpu_logical_map(cpu));
 
-	gic_raise_softirq(cpumask_of(cpu), 1);
+	smp_send_reschedule(cpu);
 
 	timeout = jiffies + (1 * HZ);
 	while (time_before(jiffies, timeout)) {
@@ -120,9 +118,7 @@ static void __init wakeup_secondary(void)
 {
 	void __iomem *backupram;
 
-	if (cpu_is_u5500())
-		backupram = __io_address(U5500_BACKUPRAM0_BASE);
-	else if (cpu_is_u8500())
+	if (cpu_is_u8500_family())
 		backupram = __io_address(U8500_BACKUPRAM0_BASE);
 	else
 		ux500_unknown_soc();
diff --git a/arch/arm/mach-ux500/ste-dma40-db5500.h b/arch/arm/mach-ux500/ste-dma40-db5500.h
deleted file mode 100644
index cb2110c32858..000000000000
--- a/arch/arm/mach-ux500/ste-dma40-db5500.h
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- *
- * DB5500-SoC-specific configuration for DMA40
- */
-
-#ifndef STE_DMA40_DB5500_H
-#define STE_DMA40_DB5500_H
-
-#define DB5500_DMA_NR_DEV 64
-
-enum dma_src_dev_type {
-	DB5500_DMA_DEV0_SPI0_RX = 0,
-	DB5500_DMA_DEV1_SPI1_RX = 1,
-	DB5500_DMA_DEV2_SPI2_RX = 2,
-	DB5500_DMA_DEV3_SPI3_RX = 3,
-	DB5500_DMA_DEV4_USB_OTG_IEP_1_9 = 4,
-	DB5500_DMA_DEV5_USB_OTG_IEP_2_10 = 5,
-	DB5500_DMA_DEV6_USB_OTG_IEP_3_11 = 6,
-	DB5500_DMA_DEV7_IRDA_RFS = 7,
-	DB5500_DMA_DEV8_IRDA_FIFO_RX = 8,
-	DB5500_DMA_DEV9_MSP0_RX = 9,
-	DB5500_DMA_DEV10_MSP1_RX = 10,
-	DB5500_DMA_DEV11_MSP2_RX = 11,
-	DB5500_DMA_DEV12_UART0_RX = 12,
-	DB5500_DMA_DEV13_UART1_RX = 13,
-	DB5500_DMA_DEV14_UART2_RX = 14,
-	DB5500_DMA_DEV15_UART3_RX = 15,
-	DB5500_DMA_DEV16_USB_OTG_IEP_8 = 16,
-	DB5500_DMA_DEV17_USB_OTG_IEP_1_9 = 17,
-	DB5500_DMA_DEV18_USB_OTG_IEP_2_10 = 18,
-	DB5500_DMA_DEV19_USB_OTG_IEP_3_11 = 19,
-	DB5500_DMA_DEV20_USB_OTG_IEP_4_12 = 20,
-	DB5500_DMA_DEV21_USB_OTG_IEP_5_13 = 21,
-	DB5500_DMA_DEV22_USB_OTG_IEP_6_14 = 22,
-	DB5500_DMA_DEV23_USB_OTG_IEP_7_15 = 23,
-	DB5500_DMA_DEV24_SDMMC0_RX = 24,
-	DB5500_DMA_DEV25_SDMMC1_RX = 25,
-	DB5500_DMA_DEV26_SDMMC2_RX = 26,
-	DB5500_DMA_DEV27_SDMMC3_RX = 27,
-	DB5500_DMA_DEV28_SDMMC4_RX = 28,
-	/* 29 - 32 not used */
-	DB5500_DMA_DEV33_SDMMC0_RX = 33,
-	DB5500_DMA_DEV34_SDMMC1_RX = 34,
-	DB5500_DMA_DEV35_SDMMC2_RX = 35,
-	DB5500_DMA_DEV36_SDMMC3_RX = 36,
-	DB5500_DMA_DEV37_SDMMC4_RX = 37,
-	DB5500_DMA_DEV38_USB_OTG_IEP_8 = 38,
-	DB5500_DMA_DEV39_USB_OTG_IEP_1_9 = 39,
-	DB5500_DMA_DEV40_USB_OTG_IEP_2_10 = 40,
-	DB5500_DMA_DEV41_USB_OTG_IEP_3_11 = 41,
-	DB5500_DMA_DEV42_USB_OTG_IEP_4_12 = 42,
-	DB5500_DMA_DEV43_USB_OTG_IEP_5_13 = 43,
-	DB5500_DMA_DEV44_USB_OTG_IEP_6_14 = 44,
-	DB5500_DMA_DEV45_USB_OTG_IEP_7_15 = 45,
-	/* 46 not used */
-	DB5500_DMA_DEV47_MCDE_RX = 47,
-	DB5500_DMA_DEV48_CRYPTO1_RX = 48,
-	/* 49, 50 not used */
-	DB5500_DMA_DEV49_I2C1_RX = 51,
-	DB5500_DMA_DEV50_I2C3_RX = 52,
-	DB5500_DMA_DEV51_I2C2_RX = 53,
-	/* 54 - 60 not used */
-	DB5500_DMA_DEV61_CRYPTO0_RX = 61,
-	/* 62, 63 not used */
-};
-
-enum dma_dest_dev_type {
-	DB5500_DMA_DEV0_SPI0_TX = 0,
-	DB5500_DMA_DEV1_SPI1_TX = 1,
-	DB5500_DMA_DEV2_SPI2_TX = 2,
-	DB5500_DMA_DEV3_SPI3_TX = 3,
-	DB5500_DMA_DEV4_USB_OTG_OEP_1_9 = 4,
-	DB5500_DMA_DEV5_USB_OTG_OEP_2_10 = 5,
-	DB5500_DMA_DEV6_USB_OTG_OEP_3_11 = 6,
-	DB5500_DMA_DEV7_IRRC_TX = 7,
-	DB5500_DMA_DEV8_IRDA_FIFO_TX = 8,
-	DB5500_DMA_DEV9_MSP0_TX = 9,
-	DB5500_DMA_DEV10_MSP1_TX = 10,
-	DB5500_DMA_DEV11_MSP2_TX = 11,
-	DB5500_DMA_DEV12_UART0_TX = 12,
-	DB5500_DMA_DEV13_UART1_TX = 13,
-	DB5500_DMA_DEV14_UART2_TX = 14,
-	DB5500_DMA_DEV15_UART3_TX = 15,
-	DB5500_DMA_DEV16_USB_OTG_OEP_8 = 16,
-	DB5500_DMA_DEV17_USB_OTG_OEP_1_9 = 17,
-	DB5500_DMA_DEV18_USB_OTG_OEP_2_10 = 18,
-	DB5500_DMA_DEV19_USB_OTG_OEP_3_11 = 19,
-	DB5500_DMA_DEV20_USB_OTG_OEP_4_12 = 20,
-	DB5500_DMA_DEV21_USB_OTG_OEP_5_13 = 21,
-	DB5500_DMA_DEV22_USB_OTG_OEP_6_14 = 22,
-	DB5500_DMA_DEV23_USB_OTG_OEP_7_15 = 23,
-	DB5500_DMA_DEV24_SDMMC0_TX = 24,
-	DB5500_DMA_DEV25_SDMMC1_TX = 25,
-	DB5500_DMA_DEV26_SDMMC2_TX = 26,
-	DB5500_DMA_DEV27_SDMMC3_TX = 27,
-	DB5500_DMA_DEV28_SDMMC4_TX = 28,
-	/* 29 - 31 not used */
-	DB5500_DMA_DEV32_FSMC_TX = 32,
-	DB5500_DMA_DEV33_SDMMC0_TX = 33,
-	DB5500_DMA_DEV34_SDMMC1_TX = 34,
-	DB5500_DMA_DEV35_SDMMC2_TX = 35,
-	DB5500_DMA_DEV36_SDMMC3_TX = 36,
-	DB5500_DMA_DEV37_SDMMC4_TX = 37,
-	DB5500_DMA_DEV38_USB_OTG_OEP_8 = 38,
-	DB5500_DMA_DEV39_USB_OTG_OEP_1_9 = 39,
-	DB5500_DMA_DEV40_USB_OTG_OEP_2_10 = 40,
-	DB5500_DMA_DEV41_USB_OTG_OEP_3_11 = 41,
-	DB5500_DMA_DEV42_USB_OTG_OEP_4_12 = 42,
-	DB5500_DMA_DEV43_USB_OTG_OEP_5_13 = 43,
-	DB5500_DMA_DEV44_USB_OTG_OEP_6_14 = 44,
-	DB5500_DMA_DEV45_USB_OTG_OEP_7_15 = 45,
-	/* 46 not used */
-	DB5500_DMA_DEV47_STM_TX = 47,
-	DB5500_DMA_DEV48_CRYPTO1_TX = 48,
-	DB5500_DMA_DEV49_CRYPTO1_TX_HASH1_TX = 49,
-	DB5500_DMA_DEV50_HASH1_TX = 50,
-	DB5500_DMA_DEV51_I2C1_TX = 51,
-	DB5500_DMA_DEV52_I2C3_TX = 52,
-	DB5500_DMA_DEV53_I2C2_TX = 53,
-	/* 54, 55 not used */
-	DB5500_DMA_MEMCPY_TX_1 = 56,
-	DB5500_DMA_MEMCPY_TX_2 = 57,
-	DB5500_DMA_MEMCPY_TX_3 = 58,
-	DB5500_DMA_MEMCPY_TX_4 = 59,
-	DB5500_DMA_MEMCPY_TX_5 = 60,
-	DB5500_DMA_DEV61_CRYPTO0_TX = 61,
-	DB5500_DMA_DEV62_CRYPTO0_TX_HASH0_TX = 62,
-	DB5500_DMA_DEV63_HASH0_TX = 63,
-};
-
-#endif
diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c
index d37df98b5c32..741e71feca78 100644
--- a/arch/arm/mach-ux500/timer.c
+++ b/arch/arm/mach-ux500/timer.c
@@ -8,6 +8,7 @@
 #include <linux/errno.h>
 #include <linux/clksrc-dbx500-prcmu.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 
 #include <asm/smp_twd.h>
 
@@ -18,8 +19,6 @@
 #include <mach/irqs.h>
 
 #ifdef CONFIG_HAVE_ARM_TWD
-static DEFINE_TWD_LOCAL_TIMER(u5500_twd_local_timer,
-			      U5500_TWD_BASE, IRQ_LOCALTIMER);
 static DEFINE_TWD_LOCAL_TIMER(u8500_twd_local_timer,
 			      U8500_TWD_BASE, IRQ_LOCALTIMER);
 
@@ -28,8 +27,8 @@ static void __init ux500_twd_init(void)
 	struct twd_local_timer *twd_local_timer;
 	int err;
 
-	twd_local_timer = cpu_is_u5500() ? &u5500_twd_local_timer :
-					   &u8500_twd_local_timer;
+	/* Use this to switch local timer base if changed in new ASICs */
+	twd_local_timer = &u8500_twd_local_timer;
 
 	if (of_have_populated_dt())
 		twd_local_timer_of_register();
@@ -43,21 +42,41 @@ static void __init ux500_twd_init(void)
 #define ux500_twd_init()	do { } while(0)
 #endif
 
+const static struct of_device_id prcmu_timer_of_match[] __initconst = {
+	{ .compatible = "stericsson,db8500-prcmu-timer-4", },
+	{ },
+};
+
 static void __init ux500_timer_init(void)
 {
 	void __iomem *mtu_timer_base;
 	void __iomem *prcmu_timer_base;
+	void __iomem *tmp_base;
+	struct device_node *np;
 
-	if (cpu_is_u5500()) {
-		mtu_timer_base = __io_address(U5500_MTU0_BASE);
-		prcmu_timer_base = __io_address(U5500_PRCMU_TIMER_3_BASE);
-	} else if (cpu_is_u8500()) {
+	if (cpu_is_u8500_family()) {
 		mtu_timer_base = __io_address(U8500_MTU0_BASE);
 		prcmu_timer_base = __io_address(U8500_PRCMU_TIMER_4_BASE);
 	} else {
 		ux500_unknown_soc();
 	}
 
+	/* TODO: Once MTU has been DT:ed place code above into else. */
+	if (of_have_populated_dt()) {
+		np = of_find_matching_node(NULL, prcmu_timer_of_match);
+		if (!np)
+			goto dt_fail;
+
+		tmp_base = of_iomap(np, 0);
+		if (!tmp_base)
+			goto dt_fail;
+
+		prcmu_timer_base = tmp_base;
+	}
+
+dt_fail:
+	/* Doing it the old fashioned way. */
+
 	/*
 	 * Here we register the timerblocks active in the system.
 	 * Localtimers (twd) is started when both cpu is up and running.
@@ -70,7 +89,7 @@ static void __init ux500_timer_init(void)
 	 * depending on delay which is not yet calibrated. RTC-RTT is in the
 	 * always-on powerdomain and is used as clockevent instead of twd when
 	 * sleeping.
-	 * The PRCMU timer 4(3 for DB5500) register a clocksource and
+	 * The PRCMU timer 4 register a clocksource and
 	 * sched_clock with higher rating then MTU since is always-on.
 	 *
 	 */
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 6bbd74e950ab..cf4687ee2a7b 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -66,12 +66,6 @@
 #define VA_VIC_BASE		__io_address(VERSATILE_VIC_BASE)
 #define VA_SIC_BASE		__io_address(VERSATILE_SIC_BASE)
 
-static struct fpga_irq_data sic_irq = {
-	.base		= VA_SIC_BASE,
-	.irq_start	= IRQ_SIC_START,
-	.chip.name	= "SIC",
-};
-
 #if 1
 #define IRQ_MMCI0A	IRQ_VICSOURCE22
 #define IRQ_AACI	IRQ_VICSOURCE24
@@ -105,8 +99,11 @@ void __init versatile_init_irq(void)
 
 	writel(~0, VA_SIC_BASE + SIC_IRQ_ENABLE_CLEAR);
 
-	fpga_irq_init(IRQ_VICSOURCE31, ~PIC_MASK, &sic_irq);
-	irq_domain_generate_simple(sic_of_match, VERSATILE_SIC_BASE, IRQ_SIC_START);
+	np = of_find_matching_node_by_address(NULL, sic_of_match,
+					      VERSATILE_SIC_BASE);
+
+	fpga_irq_init(VA_SIC_BASE, "SIC", IRQ_SIC_START,
+		IRQ_VICSOURCE31, ~PIC_MASK, np);
 
 	/*
 	 * Interrupts on secondary controller from 0 to 8 are routed to
@@ -666,17 +663,18 @@ static struct amba_device *amba_devs[] __initdata = {
  * having a specific name.
  */
 struct of_dev_auxdata versatile_auxdata_lookup[] __initdata = {
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_MMCI0_BASE, "fpga:05", NULL),
+	OF_DEV_AUXDATA("arm,primecell", VERSATILE_MMCI0_BASE, "fpga:05", &mmc0_plat_data),
 	OF_DEV_AUXDATA("arm,primecell", VERSATILE_KMI0_BASE, "fpga:06", NULL),
 	OF_DEV_AUXDATA("arm,primecell", VERSATILE_KMI1_BASE, "fpga:07", NULL),
 	OF_DEV_AUXDATA("arm,primecell", VERSATILE_UART3_BASE, "fpga:09", NULL),
+	/* FIXME: this is buggy, the platform data is needed for this MMC instance too */
 	OF_DEV_AUXDATA("arm,primecell", VERSATILE_MMCI1_BASE, "fpga:0b", NULL),
 
 	OF_DEV_AUXDATA("arm,primecell", VERSATILE_CLCD_BASE, "dev:20", &clcd_plat_data),
 	OF_DEV_AUXDATA("arm,primecell", VERSATILE_UART0_BASE, "dev:f1", NULL),
 	OF_DEV_AUXDATA("arm,primecell", VERSATILE_UART1_BASE, "dev:f2", NULL),
 	OF_DEV_AUXDATA("arm,primecell", VERSATILE_UART2_BASE, "dev:f3", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_SSP_BASE, "dev:f4", NULL),
+	OF_DEV_AUXDATA("arm,primecell", VERSATILE_SSP_BASE, "dev:f4", &ssp0_plat_data),
 
 #if 0
 	/*
diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c
index a6e23f464528..15c6a00000ec 100644
--- a/arch/arm/mach-versatile/pci.c
+++ b/arch/arm/mach-versatile/pci.c
@@ -190,7 +190,7 @@ static struct resource pre_mem = {
 	.flags	= IORESOURCE_MEM | IORESOURCE_PREFETCH,
 };
 
-static int __init pci_versatile_setup_resources(struct list_head *resources)
+static int __init pci_versatile_setup_resources(struct pci_sys_data *sys)
 {
 	int ret = 0;
 
@@ -218,9 +218,9 @@ static int __init pci_versatile_setup_resources(struct list_head *resources)
 	 * the mem resource for this bus
 	 * the prefetch mem resource for this bus
 	 */
-	pci_add_resource_offset(resources, &io_mem, sys->io_offset);
-	pci_add_resource_offset(resources, &non_mem, sys->mem_offset);
-	pci_add_resource_offset(resources, &pre_mem, sys->mem_offset);
+	pci_add_resource_offset(&sys->resources, &io_mem, sys->io_offset);
+	pci_add_resource_offset(&sys->resources, &non_mem, sys->mem_offset);
+	pci_add_resource_offset(&sys->resources, &pre_mem, sys->mem_offset);
 
 	goto out;
 
@@ -249,7 +249,7 @@ int __init pci_versatile_setup(int nr, struct pci_sys_data *sys)
 
 	if (nr == 0) {
 		sys->mem_offset = 0;
-		ret = pci_versatile_setup_resources(&sys->resources);
+		ret = pci_versatile_setup_resources(sys);
 		if (ret < 0) {
 			printk("pci_versatile_setup: resources... oops?\n");
 			goto out;
@@ -303,12 +303,6 @@ int __init pci_versatile_setup(int nr, struct pci_sys_data *sys)
 }
 
 
-struct pci_bus * __init pci_versatile_scan_bus(int nr, struct pci_sys_data *sys)
-{
-	return pci_scan_root_bus(NULL, sys->busnr, &pci_versatile_ops, sys,
-				 &sys->resources);
-}
-
 void __init pci_versatile_preinit(void)
 {
 	pcibios_min_io = 0x44000000;
@@ -339,19 +333,16 @@ static int __init versatile_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 	 *  26     1     29
 	 *  27     1     30
 	 */
-	irq = 27 + ((slot + pin - 1) & 3);
-
-	printk("PCI map irq: slot %d, pin %d, devslot %d, irq: %d\n",slot,pin,devslot,irq);
+	irq = 27 + ((slot - 24 + pin - 1) & 3);
 
 	return irq;
 }
 
 static struct hw_pci versatile_pci __initdata = {
-	.swizzle		= NULL,
 	.map_irq		= versatile_map_irq,
 	.nr_controllers		= 1,
+	.ops			= &pci_versatile_ops,
 	.setup			= pci_versatile_setup,
-	.scan			= pci_versatile_scan_bus,
 	.preinit		= pci_versatile_preinit,
 };
 
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
index 47cdcca5a7e7..fde26adaef32 100644
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -14,13 +14,14 @@
 #include <linux/ata_platform.h>
 #include <linux/smsc911x.h>
 #include <linux/spinlock.h>
-#include <linux/device.h>
 #include <linux/usb/isp1760.h>
 #include <linux/clkdev.h>
 #include <linux/mtd/physmap.h>
 
+#include <asm/arch_timer.h>
 #include <asm/mach-types.h>
 #include <asm/sizes.h>
+#include <asm/smp_twd.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
@@ -29,7 +30,6 @@
 #include <asm/hardware/gic.h>
 #include <asm/hardware/timer-sp.h>
 #include <asm/hardware/sp810.h>
-#include <asm/hardware/gic.h>
 
 #include <mach/ct-ca9x4.h>
 #include <mach/motherboard.h>
@@ -616,7 +616,6 @@ void __init v2m_dt_init_early(void)
 	}
 
 	clkdev_add_table(v2m_dt_lookups, ARRAY_SIZE(v2m_dt_lookups));
-	versatile_sched_clock_init(v2m_sysreg_base + V2M_SYS_24MHZ, 24000000);
 }
 
 static  struct of_device_id vexpress_irq_match[] __initdata = {
@@ -643,6 +642,11 @@ static void __init v2m_dt_timer_init(void)
 		return;
 	node = of_find_node_by_path(path);
 	v2m_sp804_init(of_iomap(node, 0), irq_of_parse_and_map(node, 0));
+	if (arch_timer_of_register() != 0)
+		twd_local_timer_of_register();
+
+	if (arch_timer_sched_clock_init() != 0)
+		versatile_sched_clock_init(v2m_sysreg_base + V2M_SYS_24MHZ, 24000000);
 }
 
 static struct sys_timer v2m_dt_timer = {
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 7edef9121632..101b9681c08c 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -4,23 +4,6 @@ comment "Processor Type"
 # which CPUs we support in the kernel image, and the compiler instruction
 # optimiser behaviour.
 
-# ARM610
-config CPU_ARM610
-	bool "Support ARM610 processor" if ARCH_RPC
-	select CPU_32v3
-	select CPU_CACHE_V3
-	select CPU_CACHE_VIVT
-	select CPU_CP15_MMU
-	select CPU_COPY_V3 if MMU
-	select CPU_TLB_V3 if MMU
-	select CPU_PABRT_LEGACY
-	help
-	  The ARM610 is the successor to the ARM3 processor
-	  and was produced by VLSI Technology Inc.
-
-	  Say Y if you want support for the ARM610 processor.
-	  Otherwise, say N.
-
 # ARM7TDMI
 config CPU_ARM7TDMI
 	bool "Support ARM7TDMI processor"
@@ -36,25 +19,6 @@ config CPU_ARM7TDMI
 	  Say Y if you want support for the ARM7TDMI processor.
 	  Otherwise, say N.
 
-# ARM710
-config CPU_ARM710
-	bool "Support ARM710 processor" if ARCH_RPC
-	select CPU_32v3
-	select CPU_CACHE_V3
-	select CPU_CACHE_VIVT
-	select CPU_CP15_MMU
-	select CPU_COPY_V3 if MMU
-	select CPU_TLB_V3 if MMU
-	select CPU_PABRT_LEGACY
-	help
-	  A 32-bit RISC microprocessor based on the ARM7 processor core
-	  designed by Advanced RISC Machines Ltd. The ARM710 is the
-	  successor to the ARM610 processor. It was released in
-	  July 1994 by VLSI Technology Inc.
-
-	  Say Y if you want support for the ARM710 processor.
-	  Otherwise, say N.
-
 # ARM720T
 config CPU_ARM720T
 	bool "Support ARM720T processor" if ARCH_INTEGRATOR
@@ -530,9 +494,6 @@ config CPU_CACHE_FA
 
 if MMU
 # The copy-page model
-config CPU_COPY_V3
-	bool
-
 config CPU_COPY_V4WT
 	bool
 
@@ -549,11 +510,6 @@ config CPU_COPY_V6
 	bool
 
 # This selects the TLB model
-config CPU_TLB_V3
-	bool
-	help
-	  ARM Architecture Version 3 TLB.
-
 config CPU_TLB_V4WT
 	bool
 	help
@@ -723,7 +679,7 @@ config CPU_HIGH_VECTOR
 	bool "Select the High exception vector"
 	help
 	  Say Y here to select high exception vector(0xFFFF0000~).
-	  The exception vector can be vary depending on the platform
+	  The exception vector can vary depending on the platform
 	  design in nommu mode. If your platform needs to select
 	  high exception vector, say Y.
 	  Otherwise or if you are unsure, say N, and the low exception
@@ -731,7 +687,7 @@ config CPU_HIGH_VECTOR
 
 config CPU_ICACHE_DISABLE
 	bool "Disable I-Cache (I-bit)"
-	depends on CPU_CP15 && !(CPU_ARM610 || CPU_ARM710 || CPU_ARM720T || CPU_ARM740T || CPU_XSCALE || CPU_XSC3)
+	depends on CPU_CP15 && !(CPU_ARM720T || CPU_ARM740T || CPU_XSCALE || CPU_XSC3)
 	help
 	  Say Y here to disable the processor instruction cache. Unless
 	  you have a reason not to or are unsure, say N.
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index bca7e61928c7..8a9c4cb50a93 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -44,7 +44,6 @@ obj-$(CONFIG_CPU_CACHE_FA)	+= cache-fa.o
 AFLAGS_cache-v6.o	:=-Wa,-march=armv6
 AFLAGS_cache-v7.o	:=-Wa,-march=armv7-a
 
-obj-$(CONFIG_CPU_COPY_V3)	+= copypage-v3.o
 obj-$(CONFIG_CPU_COPY_V4WT)	+= copypage-v4wt.o
 obj-$(CONFIG_CPU_COPY_V4WB)	+= copypage-v4wb.o
 obj-$(CONFIG_CPU_COPY_FEROCEON)	+= copypage-feroceon.o
@@ -54,7 +53,6 @@ obj-$(CONFIG_CPU_XSCALE)	+= copypage-xscale.o
 obj-$(CONFIG_CPU_XSC3)		+= copypage-xsc3.o
 obj-$(CONFIG_CPU_COPY_FA)	+= copypage-fa.o
 
-obj-$(CONFIG_CPU_TLB_V3)	+= tlb-v3.o
 obj-$(CONFIG_CPU_TLB_V4WT)	+= tlb-v4.o
 obj-$(CONFIG_CPU_TLB_V4WB)	+= tlb-v4wb.o
 obj-$(CONFIG_CPU_TLB_V4WBI)	+= tlb-v4wbi.o
@@ -66,8 +64,6 @@ obj-$(CONFIG_CPU_TLB_FA)	+= tlb-fa.o
 AFLAGS_tlb-v6.o		:=-Wa,-march=armv6
 AFLAGS_tlb-v7.o		:=-Wa,-march=armv7-a
 
-obj-$(CONFIG_CPU_ARM610)	+= proc-arm6_7.o
-obj-$(CONFIG_CPU_ARM710)	+= proc-arm6_7.o
 obj-$(CONFIG_CPU_ARM7TDMI)	+= proc-arm7tdmi.o
 obj-$(CONFIG_CPU_ARM720T)	+= proc-arm720.o
 obj-$(CONFIG_CPU_ARM740T)	+= proc-arm740.o
diff --git a/arch/arm/mm/abort-ev6.S b/arch/arm/mm/abort-ev6.S
index ff1f7cc11f87..80741992a9fc 100644
--- a/arch/arm/mm/abort-ev6.S
+++ b/arch/arm/mm/abort-ev6.S
@@ -26,18 +26,23 @@ ENTRY(v6_early_abort)
 	mrc	p15, 0, r1, c5, c0, 0		@ get FSR
 	mrc	p15, 0, r0, c6, c0, 0		@ get FAR
 /*
- * Faulty SWP instruction on 1136 doesn't set bit 11 in DFSR (erratum 326103).
- * The test below covers all the write situations, including Java bytecodes
+ * Faulty SWP instruction on 1136 doesn't set bit 11 in DFSR.
  */
-	bic	r1, r1, #1 << 11		@ clear bit 11 of FSR
+#ifdef CONFIG_ARM_ERRATA_326103
+	ldr	ip, =0x4107b36
+	mrc	p15, 0, r3, c0, c0, 0		@ get processor id
+	teq	ip, r3, lsr #4			@ r0 ARM1136?
+	bne	do_DataAbort
 	tst	r5, #PSR_J_BIT			@ Java?
+	tsteq	r5, #PSR_T_BIT			@ Thumb?
 	bne	do_DataAbort
-	do_thumb_abort fsr=r1, pc=r4, psr=r5, tmp=r3
-	ldreq	r3, [r4]			@ read aborted ARM instruction
+	bic	r1, r1, #1 << 11		@ clear bit 11 of FSR
+	ldr	r3, [r4]			@ read aborted ARM instruction
 #ifdef CONFIG_CPU_ENDIAN_BE8
-	reveq	r3, r3
+	rev	r3, r3
 #endif
 	do_ldrd_abort tmp=ip, insn=r3
 	tst	r3, #1 << 20			@ L = 0 -> write
 	orreq	r1, r1, #1 << 11		@ yes.
+#endif
 	b	do_DataAbort
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index a53fd2aaa2f4..2a8e380501e8 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -32,6 +32,7 @@ static void __iomem *l2x0_base;
 static DEFINE_RAW_SPINLOCK(l2x0_lock);
 static u32 l2x0_way_mask;	/* Bitmask of active ways */
 static u32 l2x0_size;
+static unsigned long sync_reg_offset = L2X0_CACHE_SYNC;
 
 struct l2x0_regs l2x0_saved_regs;
 
@@ -61,12 +62,7 @@ static inline void cache_sync(void)
 {
 	void __iomem *base = l2x0_base;
 
-#ifdef CONFIG_PL310_ERRATA_753970
-	/* write to an unmmapped register */
-	writel_relaxed(0, base + L2X0_DUMMY_REG);
-#else
-	writel_relaxed(0, base + L2X0_CACHE_SYNC);
-#endif
+	writel_relaxed(0, base + sync_reg_offset);
 	cache_wait(base + L2X0_CACHE_SYNC, 1);
 }
 
@@ -85,10 +81,13 @@ static inline void l2x0_inv_line(unsigned long addr)
 }
 
 #if defined(CONFIG_PL310_ERRATA_588369) || defined(CONFIG_PL310_ERRATA_727915)
+static inline void debug_writel(unsigned long val)
+{
+	if (outer_cache.set_debug)
+		outer_cache.set_debug(val);
+}
 
-#define debug_writel(val)	outer_cache.set_debug(val)
-
-static void l2x0_set_debug(unsigned long val)
+static void pl310_set_debug(unsigned long val)
 {
 	writel_relaxed(val, l2x0_base + L2X0_DEBUG_CTRL);
 }
@@ -98,7 +97,7 @@ static inline void debug_writel(unsigned long val)
 {
 }
 
-#define l2x0_set_debug	NULL
+#define pl310_set_debug	NULL
 #endif
 
 #ifdef CONFIG_PL310_ERRATA_588369
@@ -331,6 +330,11 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask)
 		else
 			ways = 8;
 		type = "L310";
+#ifdef CONFIG_PL310_ERRATA_753970
+		/* Unmapped register. */
+		sync_reg_offset = L2X0_DUMMY_REG;
+#endif
+		outer_cache.set_debug = pl310_set_debug;
 		break;
 	case L2X0_CACHE_ID_PART_L210:
 		ways = (aux >> 13) & 0xf;
@@ -379,7 +383,6 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask)
 	outer_cache.flush_all = l2x0_flush_all;
 	outer_cache.inv_all = l2x0_inv_all;
 	outer_cache.disable = l2x0_disable;
-	outer_cache.set_debug = l2x0_set_debug;
 
 	printk(KERN_INFO "%s cache controller enabled\n", type);
 	printk(KERN_INFO "l2x0: %d ways, CACHE_ID 0x%08x, AUX_CTRL 0x%08x, Cache size: %d B\n",
diff --git a/arch/arm/mm/cache-tauros2.c b/arch/arm/mm/cache-tauros2.c
index 1fbca05fe906..23a7643e9a87 100644
--- a/arch/arm/mm/cache-tauros2.c
+++ b/arch/arm/mm/cache-tauros2.c
@@ -108,6 +108,26 @@ static void tauros2_flush_range(unsigned long start, unsigned long end)
 
 	dsb();
 }
+
+static void tauros2_disable(void)
+{
+	__asm__ __volatile__ (
+	"mcr	p15, 1, %0, c7, c11, 0 @L2 Cache Clean All\n\t"
+	"mrc	p15, 0, %0, c1, c0, 0\n\t"
+	"bic	%0, %0, #(1 << 26)\n\t"
+	"mcr	p15, 0, %0, c1, c0, 0  @Disable L2 Cache\n\t"
+	: : "r" (0x0));
+}
+
+static void tauros2_resume(void)
+{
+	__asm__ __volatile__ (
+	"mcr	p15, 1, %0, c7, c7, 0 @L2 Cache Invalidate All\n\t"
+	"mrc	p15, 0, %0, c1, c0, 0\n\t"
+	"orr	%0, %0, #(1 << 26)\n\t"
+	"mcr	p15, 0, %0, c1, c0, 0 @Enable L2 Cache\n\t"
+	: : "r" (0x0));
+}
 #endif
 
 static inline u32 __init read_extra_features(void)
@@ -194,6 +214,8 @@ void __init tauros2_init(void)
 		outer_cache.inv_range = tauros2_inv_range;
 		outer_cache.clean_range = tauros2_clean_range;
 		outer_cache.flush_range = tauros2_flush_range;
+		outer_cache.disable = tauros2_disable;
+		outer_cache.resume = tauros2_resume;
 	}
 #endif
 
@@ -219,6 +241,8 @@ void __init tauros2_init(void)
 		outer_cache.inv_range = tauros2_inv_range;
 		outer_cache.clean_range = tauros2_clean_range;
 		outer_cache.flush_range = tauros2_flush_range;
+		outer_cache.disable = tauros2_disable;
+		outer_cache.resume = tauros2_resume;
 	}
 #endif
 
diff --git a/arch/arm/mm/cache-v3.S b/arch/arm/mm/cache-v3.S
index c2301f226100..52e35f32eefb 100644
--- a/arch/arm/mm/cache-v3.S
+++ b/arch/arm/mm/cache-v3.S
@@ -78,6 +78,7 @@ ENTRY(v3_coherent_kern_range)
  *	- end	 - virtual end address
  */
 ENTRY(v3_coherent_user_range)
+	mov	r0, #0
 	mov	pc, lr
 
 /*
diff --git a/arch/arm/mm/cache-v4.S b/arch/arm/mm/cache-v4.S
index fd9bb7addc8d..022135d2b7e4 100644
--- a/arch/arm/mm/cache-v4.S
+++ b/arch/arm/mm/cache-v4.S
@@ -88,6 +88,7 @@ ENTRY(v4_coherent_kern_range)
  *	- end	 - virtual end address
  */
 ENTRY(v4_coherent_user_range)
+	mov	r0, #0
 	mov	pc, lr
 
 /*
diff --git a/arch/arm/mm/cache-v4wb.S b/arch/arm/mm/cache-v4wb.S
index 4f2c14151ccb..8f1eeae340c8 100644
--- a/arch/arm/mm/cache-v4wb.S
+++ b/arch/arm/mm/cache-v4wb.S
@@ -167,9 +167,9 @@ ENTRY(v4wb_coherent_user_range)
 	add	r0, r0, #CACHE_DLINESIZE
 	cmp	r0, r1
 	blo	1b
-	mov	ip, #0
-	mcr	p15, 0, ip, c7, c5, 0		@ invalidate I cache
-	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
+	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 	mov	pc, lr
 
 
diff --git a/arch/arm/mm/cache-v4wt.S b/arch/arm/mm/cache-v4wt.S
index 4d7b467631ce..b34a5f908a82 100644
--- a/arch/arm/mm/cache-v4wt.S
+++ b/arch/arm/mm/cache-v4wt.S
@@ -125,6 +125,7 @@ ENTRY(v4wt_coherent_user_range)
 	add	r0, r0, #CACHE_DLINESIZE
 	cmp	r0, r1
 	blo	1b
+	mov	r0, #0
 	mov	pc, lr
 
 /*
diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S
index 74c2e5a33a4d..4b10760c56d6 100644
--- a/arch/arm/mm/cache-v6.S
+++ b/arch/arm/mm/cache-v6.S
@@ -12,6 +12,7 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <asm/assembler.h>
+#include <asm/errno.h>
 #include <asm/unwind.h>
 
 #include "proc-macros.S"
@@ -135,7 +136,6 @@ ENTRY(v6_coherent_user_range)
 1:
  USER(	mcr	p15, 0, r0, c7, c10, 1	)	@ clean D line
 	add	r0, r0, #CACHE_LINE_SIZE
-2:
 	cmp	r0, r1
 	blo	1b
 #endif
@@ -154,13 +154,11 @@ ENTRY(v6_coherent_user_range)
 
 /*
  * Fault handling for the cache operation above. If the virtual address in r0
- * isn't mapped, just try the next page.
+ * isn't mapped, fail with -EFAULT.
  */
 9001:
-	mov	r0, r0, lsr #12
-	mov	r0, r0, lsl #12
-	add	r0, r0, #4096
-	b	2b
+	mov	r0, #-EFAULT
+	mov	pc, lr
  UNWIND(.fnend		)
 ENDPROC(v6_coherent_user_range)
 ENDPROC(v6_coherent_kern_range)
diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S
index a655d3da386d..39e3fb3db801 100644
--- a/arch/arm/mm/cache-v7.S
+++ b/arch/arm/mm/cache-v7.S
@@ -13,6 +13,7 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <asm/assembler.h>
+#include <asm/errno.h>
 #include <asm/unwind.h>
 
 #include "proc-macros.S"
@@ -198,7 +199,6 @@ ENTRY(v7_coherent_user_range)
 	add	r12, r12, r2
 	cmp	r12, r1
 	blo	2b
-3:
 	mov	r0, #0
 	ALT_SMP(mcr	p15, 0, r0, c7, c1, 6)	@ invalidate BTB Inner Shareable
 	ALT_UP(mcr	p15, 0, r0, c7, c5, 6)	@ invalidate BTB
@@ -208,13 +208,11 @@ ENTRY(v7_coherent_user_range)
 
 /*
  * Fault handling for the cache operation above. If the virtual address in r0
- * isn't mapped, just try the next page.
+ * isn't mapped, fail with -EFAULT.
  */
 9001:
-	mov	r12, r12, lsr #12
-	mov	r12, r12, lsl #12
-	add	r12, r12, #4096
-	b	3b
+	mov	r0, #-EFAULT
+	mov	pc, lr
  UNWIND(.fnend		)
 ENDPROC(v7_coherent_kern_range)
 ENDPROC(v7_coherent_user_range)
diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c
index ee9bb363d606..806cc4f63516 100644
--- a/arch/arm/mm/context.c
+++ b/arch/arm/mm/context.c
@@ -18,30 +18,39 @@
 
 static DEFINE_RAW_SPINLOCK(cpu_asid_lock);
 unsigned int cpu_last_asid = ASID_FIRST_VERSION;
-#ifdef CONFIG_SMP
-DEFINE_PER_CPU(struct mm_struct *, current_mm);
-#endif
 
 #ifdef CONFIG_ARM_LPAE
-#define cpu_set_asid(asid) {						\
-	unsigned long ttbl, ttbh;					\
-	asm volatile(							\
-	"	mrrc	p15, 0, %0, %1, c2		@ read TTBR0\n"	\
-	"	mov	%1, %2, lsl #(48 - 32)		@ set ASID\n"	\
-	"	mcrr	p15, 0, %0, %1, c2		@ set TTBR0\n"	\
-	: "=&r" (ttbl), "=&r" (ttbh)					\
-	: "r" (asid & ~ASID_MASK));					\
+void cpu_set_reserved_ttbr0(void)
+{
+	unsigned long ttbl = __pa(swapper_pg_dir);
+	unsigned long ttbh = 0;
+
+	/*
+	 * Set TTBR0 to swapper_pg_dir which contains only global entries. The
+	 * ASID is set to 0.
+	 */
+	asm volatile(
+	"	mcrr	p15, 0, %0, %1, c2		@ set TTBR0\n"
+	:
+	: "r" (ttbl), "r" (ttbh));
+	isb();
 }
 #else
-#define cpu_set_asid(asid) \
-	asm("	mcr	p15, 0, %0, c13, c0, 1\n" : : "r" (asid))
+void cpu_set_reserved_ttbr0(void)
+{
+	u32 ttb;
+	/* Copy TTBR1 into TTBR0 */
+	asm volatile(
+	"	mrc	p15, 0, %0, c2, c0, 1		@ read TTBR1\n"
+	"	mcr	p15, 0, %0, c2, c0, 0		@ set TTBR0\n"
+	: "=r" (ttb));
+	isb();
+}
 #endif
 
 /*
  * We fork()ed a process, and we need a new context for the child
- * to run in.  We reserve version 0 for initial tasks so we will
- * always allocate an ASID. The ASID 0 is reserved for the TTBR
- * register changing sequence.
+ * to run in.
  */
 void __init_new_context(struct task_struct *tsk, struct mm_struct *mm)
 {
@@ -51,9 +60,7 @@ void __init_new_context(struct task_struct *tsk, struct mm_struct *mm)
 
 static void flush_context(void)
 {
-	/* set the reserved ASID before flushing the TLB */
-	cpu_set_asid(0);
-	isb();
+	cpu_set_reserved_ttbr0();
 	local_flush_tlb_all();
 	if (icache_is_vivt_asid_tagged()) {
 		__flush_icache_all();
@@ -98,14 +105,7 @@ static void reset_context(void *info)
 {
 	unsigned int asid;
 	unsigned int cpu = smp_processor_id();
-	struct mm_struct *mm = per_cpu(current_mm, cpu);
-
-	/*
-	 * Check if a current_mm was set on this CPU as it might still
-	 * be in the early booting stages and using the reserved ASID.
-	 */
-	if (!mm)
-		return;
+	struct mm_struct *mm = current->active_mm;
 
 	smp_rmb();
 	asid = cpu_last_asid + cpu + 1;
@@ -114,8 +114,7 @@ static void reset_context(void *info)
 	set_mm_context(mm, asid);
 
 	/* set the new ASID */
-	cpu_set_asid(mm->context.id);
-	isb();
+	cpu_switch_mm(mm->pgd, mm);
 }
 
 #else
diff --git a/arch/arm/mm/copypage-v3.c b/arch/arm/mm/copypage-v3.c
deleted file mode 100644
index 3935bddd4769..000000000000
--- a/arch/arm/mm/copypage-v3.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- *  linux/arch/arm/mm/copypage-v3.c
- *
- *  Copyright (C) 1995-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/init.h>
-#include <linux/highmem.h>
-
-/*
- * ARMv3 optimised copy_user_highpage
- *
- * FIXME: do we need to handle cache stuff...
- */
-static void __naked
-v3_copy_user_page(void *kto, const void *kfrom)
-{
-	asm("\n\
-	stmfd	sp!, {r4, lr}			@	2\n\
-	mov	r2, %2				@	1\n\
-	ldmia	%0!, {r3, r4, ip, lr}		@	4+1\n\
-1:	stmia	%1!, {r3, r4, ip, lr}		@	4\n\
-	ldmia	%0!, {r3, r4, ip, lr}		@	4+1\n\
-	stmia	%1!, {r3, r4, ip, lr}		@	4\n\
-	ldmia	%0!, {r3, r4, ip, lr}		@	4+1\n\
-	stmia	%1!, {r3, r4, ip, lr}		@	4\n\
-	ldmia	%0!, {r3, r4, ip, lr}		@	4\n\
-	subs	r2, r2, #1			@	1\n\
-	stmia	%1!, {r3, r4, ip, lr}		@	4\n\
-	ldmneia	%0!, {r3, r4, ip, lr}		@	4\n\
-	bne	1b				@	1\n\
-	ldmfd	sp!, {r4, pc}			@	3"
-	:
-	: "r" (kfrom), "r" (kto), "I" (PAGE_SIZE / 64));
-}
-
-void v3_copy_user_highpage(struct page *to, struct page *from,
-	unsigned long vaddr, struct vm_area_struct *vma)
-{
-	void *kto, *kfrom;
-
-	kto = kmap_atomic(to);
-	kfrom = kmap_atomic(from);
-	v3_copy_user_page(kto, kfrom);
-	kunmap_atomic(kfrom);
-	kunmap_atomic(kto);
-}
-
-/*
- * ARMv3 optimised clear_user_page
- *
- * FIXME: do we need to handle cache stuff...
- */
-void v3_clear_user_highpage(struct page *page, unsigned long vaddr)
-{
-	void *ptr, *kaddr = kmap_atomic(page);
-	asm volatile("\n\
-	mov	r1, %2				@ 1\n\
-	mov	r2, #0				@ 1\n\
-	mov	r3, #0				@ 1\n\
-	mov	ip, #0				@ 1\n\
-	mov	lr, #0				@ 1\n\
-1:	stmia	%0!, {r2, r3, ip, lr}		@ 4\n\
-	stmia	%0!, {r2, r3, ip, lr}		@ 4\n\
-	stmia	%0!, {r2, r3, ip, lr}		@ 4\n\
-	stmia	%0!, {r2, r3, ip, lr}		@ 4\n\
-	subs	r1, r1, #1			@ 1\n\
-	bne	1b				@ 1"
-	: "=r" (ptr)
-	: "0" (kaddr), "I" (PAGE_SIZE / 64)
-	: "r1", "r2", "r3", "ip", "lr");
-	kunmap_atomic(kaddr);
-}
-
-struct cpu_user_fns v3_user_fns __initdata = {
-	.cpu_clear_user_highpage = v3_clear_user_highpage,
-	.cpu_copy_user_highpage	= v3_copy_user_highpage,
-};
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index db23ae4aaaab..ea6b43154090 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -17,8 +17,12 @@
 #include <linux/init.h>
 #include <linux/device.h>
 #include <linux/dma-mapping.h>
+#include <linux/dma-contiguous.h>
 #include <linux/highmem.h>
+#include <linux/memblock.h>
 #include <linux/slab.h>
+#include <linux/iommu.h>
+#include <linux/vmalloc.h>
 
 #include <asm/memory.h>
 #include <asm/highmem.h>
@@ -26,9 +30,112 @@
 #include <asm/tlbflush.h>
 #include <asm/sizes.h>
 #include <asm/mach/arch.h>
+#include <asm/dma-iommu.h>
+#include <asm/mach/map.h>
+#include <asm/system_info.h>
+#include <asm/dma-contiguous.h>
 
 #include "mm.h"
 
+/*
+ * The DMA API is built upon the notion of "buffer ownership".  A buffer
+ * is either exclusively owned by the CPU (and therefore may be accessed
+ * by it) or exclusively owned by the DMA device.  These helper functions
+ * represent the transitions between these two ownership states.
+ *
+ * Note, however, that on later ARMs, this notion does not work due to
+ * speculative prefetches.  We model our approach on the assumption that
+ * the CPU does do speculative prefetches, which means we clean caches
+ * before transfers and delay cache invalidation until transfer completion.
+ *
+ */
+static void __dma_page_cpu_to_dev(struct page *, unsigned long,
+		size_t, enum dma_data_direction);
+static void __dma_page_dev_to_cpu(struct page *, unsigned long,
+		size_t, enum dma_data_direction);
+
+/**
+ * arm_dma_map_page - map a portion of a page for streaming DMA
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @page: page that buffer resides in
+ * @offset: offset into page for start of buffer
+ * @size: size of buffer to map
+ * @dir: DMA transfer direction
+ *
+ * Ensure that any data held in the cache is appropriately discarded
+ * or written back.
+ *
+ * The device owns this memory once this call has completed.  The CPU
+ * can regain ownership by calling dma_unmap_page().
+ */
+static dma_addr_t arm_dma_map_page(struct device *dev, struct page *page,
+	     unsigned long offset, size_t size, enum dma_data_direction dir,
+	     struct dma_attrs *attrs)
+{
+	if (!arch_is_coherent())
+		__dma_page_cpu_to_dev(page, offset, size, dir);
+	return pfn_to_dma(dev, page_to_pfn(page)) + offset;
+}
+
+/**
+ * arm_dma_unmap_page - unmap a buffer previously mapped through dma_map_page()
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @handle: DMA address of buffer
+ * @size: size of buffer (same as passed to dma_map_page)
+ * @dir: DMA transfer direction (same as passed to dma_map_page)
+ *
+ * Unmap a page streaming mode DMA translation.  The handle and size
+ * must match what was provided in the previous dma_map_page() call.
+ * All other usages are undefined.
+ *
+ * After this call, reads by the CPU to the buffer are guaranteed to see
+ * whatever the device wrote there.
+ */
+static void arm_dma_unmap_page(struct device *dev, dma_addr_t handle,
+		size_t size, enum dma_data_direction dir,
+		struct dma_attrs *attrs)
+{
+	if (!arch_is_coherent())
+		__dma_page_dev_to_cpu(pfn_to_page(dma_to_pfn(dev, handle)),
+				      handle & ~PAGE_MASK, size, dir);
+}
+
+static void arm_dma_sync_single_for_cpu(struct device *dev,
+		dma_addr_t handle, size_t size, enum dma_data_direction dir)
+{
+	unsigned int offset = handle & (PAGE_SIZE - 1);
+	struct page *page = pfn_to_page(dma_to_pfn(dev, handle-offset));
+	if (!arch_is_coherent())
+		__dma_page_dev_to_cpu(page, offset, size, dir);
+}
+
+static void arm_dma_sync_single_for_device(struct device *dev,
+		dma_addr_t handle, size_t size, enum dma_data_direction dir)
+{
+	unsigned int offset = handle & (PAGE_SIZE - 1);
+	struct page *page = pfn_to_page(dma_to_pfn(dev, handle-offset));
+	if (!arch_is_coherent())
+		__dma_page_cpu_to_dev(page, offset, size, dir);
+}
+
+static int arm_dma_set_mask(struct device *dev, u64 dma_mask);
+
+struct dma_map_ops arm_dma_ops = {
+	.alloc			= arm_dma_alloc,
+	.free			= arm_dma_free,
+	.mmap			= arm_dma_mmap,
+	.map_page		= arm_dma_map_page,
+	.unmap_page		= arm_dma_unmap_page,
+	.map_sg			= arm_dma_map_sg,
+	.unmap_sg		= arm_dma_unmap_sg,
+	.sync_single_for_cpu	= arm_dma_sync_single_for_cpu,
+	.sync_single_for_device	= arm_dma_sync_single_for_device,
+	.sync_sg_for_cpu	= arm_dma_sync_sg_for_cpu,
+	.sync_sg_for_device	= arm_dma_sync_sg_for_device,
+	.set_dma_mask		= arm_dma_set_mask,
+};
+EXPORT_SYMBOL(arm_dma_ops);
+
 static u64 get_coherent_dma_mask(struct device *dev)
 {
 	u64 mask = (u64)arm_dma_limit;
@@ -56,6 +163,21 @@ static u64 get_coherent_dma_mask(struct device *dev)
 	return mask;
 }
 
+static void __dma_clear_buffer(struct page *page, size_t size)
+{
+	void *ptr;
+	/*
+	 * Ensure that the allocated pages are zeroed, and that any data
+	 * lurking in the kernel direct-mapped region is invalidated.
+	 */
+	ptr = page_address(page);
+	if (ptr) {
+		memset(ptr, 0, size);
+		dmac_flush_range(ptr, ptr + size);
+		outer_flush_range(__pa(ptr), __pa(ptr) + size);
+	}
+}
+
 /*
  * Allocate a DMA buffer for 'dev' of size 'size' using the
  * specified gfp mask.  Note that 'size' must be page aligned.
@@ -64,23 +186,6 @@ static struct page *__dma_alloc_buffer(struct device *dev, size_t size, gfp_t gf
 {
 	unsigned long order = get_order(size);
 	struct page *page, *p, *e;
-	void *ptr;
-	u64 mask = get_coherent_dma_mask(dev);
-
-#ifdef CONFIG_DMA_API_DEBUG
-	u64 limit = (mask + 1) & ~mask;
-	if (limit && size >= limit) {
-		dev_warn(dev, "coherent allocation too big (requested %#x mask %#llx)\n",
-			size, mask);
-		return NULL;
-	}
-#endif
-
-	if (!mask)
-		return NULL;
-
-	if (mask < 0xffffffffULL)
-		gfp |= GFP_DMA;
 
 	page = alloc_pages(gfp, order);
 	if (!page)
@@ -93,14 +198,7 @@ static struct page *__dma_alloc_buffer(struct device *dev, size_t size, gfp_t gf
 	for (p = page + (size >> PAGE_SHIFT), e = page + (1 << order); p < e; p++)
 		__free_page(p);
 
-	/*
-	 * Ensure that the allocated pages are zeroed, and that any data
-	 * lurking in the kernel direct-mapped region is invalidated.
-	 */
-	ptr = page_address(page);
-	memset(ptr, 0, size);
-	dmac_flush_range(ptr, ptr + size);
-	outer_flush_range(__pa(ptr), __pa(ptr) + size);
+	__dma_clear_buffer(page, size);
 
 	return page;
 }
@@ -170,6 +268,11 @@ static int __init consistent_init(void)
 	unsigned long base = consistent_base;
 	unsigned long num_ptes = (CONSISTENT_END - base) >> PMD_SHIFT;
 
+#ifndef CONFIG_ARM_DMA_USE_IOMMU
+	if (cpu_architecture() >= CPU_ARCH_ARMv6)
+		return 0;
+#endif
+
 	consistent_pte = kmalloc(num_ptes * sizeof(pte_t), GFP_KERNEL);
 	if (!consistent_pte) {
 		pr_err("%s: no memory\n", __func__);
@@ -184,14 +287,14 @@ static int __init consistent_init(void)
 
 		pud = pud_alloc(&init_mm, pgd, base);
 		if (!pud) {
-			printk(KERN_ERR "%s: no pud tables\n", __func__);
+			pr_err("%s: no pud tables\n", __func__);
 			ret = -ENOMEM;
 			break;
 		}
 
 		pmd = pmd_alloc(&init_mm, pud, base);
 		if (!pmd) {
-			printk(KERN_ERR "%s: no pmd tables\n", __func__);
+			pr_err("%s: no pmd tables\n", __func__);
 			ret = -ENOMEM;
 			break;
 		}
@@ -199,7 +302,7 @@ static int __init consistent_init(void)
 
 		pte = pte_alloc_kernel(pmd, base);
 		if (!pte) {
-			printk(KERN_ERR "%s: no pte tables\n", __func__);
+			pr_err("%s: no pte tables\n", __func__);
 			ret = -ENOMEM;
 			break;
 		}
@@ -210,9 +313,101 @@ static int __init consistent_init(void)
 
 	return ret;
 }
-
 core_initcall(consistent_init);
 
+static void *__alloc_from_contiguous(struct device *dev, size_t size,
+				     pgprot_t prot, struct page **ret_page);
+
+static struct arm_vmregion_head coherent_head = {
+	.vm_lock	= __SPIN_LOCK_UNLOCKED(&coherent_head.vm_lock),
+	.vm_list	= LIST_HEAD_INIT(coherent_head.vm_list),
+};
+
+size_t coherent_pool_size = DEFAULT_CONSISTENT_DMA_SIZE / 8;
+
+static int __init early_coherent_pool(char *p)
+{
+	coherent_pool_size = memparse(p, &p);
+	return 0;
+}
+early_param("coherent_pool", early_coherent_pool);
+
+/*
+ * Initialise the coherent pool for atomic allocations.
+ */
+static int __init coherent_init(void)
+{
+	pgprot_t prot = pgprot_dmacoherent(pgprot_kernel);
+	size_t size = coherent_pool_size;
+	struct page *page;
+	void *ptr;
+
+	if (cpu_architecture() < CPU_ARCH_ARMv6)
+		return 0;
+
+	ptr = __alloc_from_contiguous(NULL, size, prot, &page);
+	if (ptr) {
+		coherent_head.vm_start = (unsigned long) ptr;
+		coherent_head.vm_end = (unsigned long) ptr + size;
+		printk(KERN_INFO "DMA: preallocated %u KiB pool for atomic coherent allocations\n",
+		       (unsigned)size / 1024);
+		return 0;
+	}
+	printk(KERN_ERR "DMA: failed to allocate %u KiB pool for atomic coherent allocation\n",
+	       (unsigned)size / 1024);
+	return -ENOMEM;
+}
+/*
+ * CMA is activated by core_initcall, so we must be called after it.
+ */
+postcore_initcall(coherent_init);
+
+struct dma_contig_early_reserve {
+	phys_addr_t base;
+	unsigned long size;
+};
+
+static struct dma_contig_early_reserve dma_mmu_remap[MAX_CMA_AREAS] __initdata;
+
+static int dma_mmu_remap_num __initdata;
+
+void __init dma_contiguous_early_fixup(phys_addr_t base, unsigned long size)
+{
+	dma_mmu_remap[dma_mmu_remap_num].base = base;
+	dma_mmu_remap[dma_mmu_remap_num].size = size;
+	dma_mmu_remap_num++;
+}
+
+void __init dma_contiguous_remap(void)
+{
+	int i;
+	for (i = 0; i < dma_mmu_remap_num; i++) {
+		phys_addr_t start = dma_mmu_remap[i].base;
+		phys_addr_t end = start + dma_mmu_remap[i].size;
+		struct map_desc map;
+		unsigned long addr;
+
+		if (end > arm_lowmem_limit)
+			end = arm_lowmem_limit;
+		if (start >= end)
+			return;
+
+		map.pfn = __phys_to_pfn(start);
+		map.virtual = __phys_to_virt(start);
+		map.length = end - start;
+		map.type = MT_MEMORY_DMA_READY;
+
+		/*
+		 * Clear previous low-memory mapping
+		 */
+		for (addr = __phys_to_virt(start); addr < __phys_to_virt(end);
+		     addr += PMD_SIZE)
+			pmd_clear(pmd_off_k(addr));
+
+		iotable_init(&map, 1);
+	}
+}
+
 static void *
 __dma_alloc_remap(struct page *page, size_t size, gfp_t gfp, pgprot_t prot,
 	const void *caller)
@@ -222,7 +417,7 @@ __dma_alloc_remap(struct page *page, size_t size, gfp_t gfp, pgprot_t prot,
 	int bit;
 
 	if (!consistent_pte) {
-		printk(KERN_ERR "%s: not initialised\n", __func__);
+		pr_err("%s: not initialised\n", __func__);
 		dump_stack();
 		return NULL;
 	}
@@ -249,7 +444,7 @@ __dma_alloc_remap(struct page *page, size_t size, gfp_t gfp, pgprot_t prot,
 		u32 off = CONSISTENT_OFFSET(c->vm_start) & (PTRS_PER_PTE-1);
 
 		pte = consistent_pte[idx] + off;
-		c->vm_pages = page;
+		c->priv = page;
 
 		do {
 			BUG_ON(!pte_none(*pte));
@@ -281,14 +476,14 @@ static void __dma_free_remap(void *cpu_addr, size_t size)
 
 	c = arm_vmregion_find_remove(&consistent_head, (unsigned long)cpu_addr);
 	if (!c) {
-		printk(KERN_ERR "%s: trying to free invalid coherent area: %p\n",
+		pr_err("%s: trying to free invalid coherent area: %p\n",
 		       __func__, cpu_addr);
 		dump_stack();
 		return;
 	}
 
 	if ((c->vm_end - c->vm_start) != size) {
-		printk(KERN_ERR "%s: freeing wrong coherent size (%ld != %d)\n",
+		pr_err("%s: freeing wrong coherent size (%ld != %d)\n",
 		       __func__, c->vm_end - c->vm_start, size);
 		dump_stack();
 		size = c->vm_end - c->vm_start;
@@ -310,8 +505,8 @@ static void __dma_free_remap(void *cpu_addr, size_t size)
 		}
 
 		if (pte_none(pte) || !pte_present(pte))
-			printk(KERN_CRIT "%s: bad page in kernel page table\n",
-			       __func__);
+			pr_crit("%s: bad page in kernel page table\n",
+				__func__);
 	} while (size -= PAGE_SIZE);
 
 	flush_tlb_kernel_range(c->vm_start, c->vm_end);
@@ -319,20 +514,182 @@ static void __dma_free_remap(void *cpu_addr, size_t size)
 	arm_vmregion_free(&consistent_head, c);
 }
 
+static int __dma_update_pte(pte_t *pte, pgtable_t token, unsigned long addr,
+			    void *data)
+{
+	struct page *page = virt_to_page(addr);
+	pgprot_t prot = *(pgprot_t *)data;
+
+	set_pte_ext(pte, mk_pte(page, prot), 0);
+	return 0;
+}
+
+static void __dma_remap(struct page *page, size_t size, pgprot_t prot)
+{
+	unsigned long start = (unsigned long) page_address(page);
+	unsigned end = start + size;
+
+	apply_to_page_range(&init_mm, start, size, __dma_update_pte, &prot);
+	dsb();
+	flush_tlb_kernel_range(start, end);
+}
+
+static void *__alloc_remap_buffer(struct device *dev, size_t size, gfp_t gfp,
+				 pgprot_t prot, struct page **ret_page,
+				 const void *caller)
+{
+	struct page *page;
+	void *ptr;
+	page = __dma_alloc_buffer(dev, size, gfp);
+	if (!page)
+		return NULL;
+
+	ptr = __dma_alloc_remap(page, size, gfp, prot, caller);
+	if (!ptr) {
+		__dma_free_buffer(page, size);
+		return NULL;
+	}
+
+	*ret_page = page;
+	return ptr;
+}
+
+static void *__alloc_from_pool(struct device *dev, size_t size,
+			       struct page **ret_page, const void *caller)
+{
+	struct arm_vmregion *c;
+	size_t align;
+
+	if (!coherent_head.vm_start) {
+		printk(KERN_ERR "%s: coherent pool not initialised!\n",
+		       __func__);
+		dump_stack();
+		return NULL;
+	}
+
+	/*
+	 * Align the region allocation - allocations from pool are rather
+	 * small, so align them to their order in pages, minimum is a page
+	 * size. This helps reduce fragmentation of the DMA space.
+	 */
+	align = PAGE_SIZE << get_order(size);
+	c = arm_vmregion_alloc(&coherent_head, align, size, 0, caller);
+	if (c) {
+		void *ptr = (void *)c->vm_start;
+		struct page *page = virt_to_page(ptr);
+		*ret_page = page;
+		return ptr;
+	}
+	return NULL;
+}
+
+static int __free_from_pool(void *cpu_addr, size_t size)
+{
+	unsigned long start = (unsigned long)cpu_addr;
+	unsigned long end = start + size;
+	struct arm_vmregion *c;
+
+	if (start < coherent_head.vm_start || end > coherent_head.vm_end)
+		return 0;
+
+	c = arm_vmregion_find_remove(&coherent_head, (unsigned long)start);
+
+	if ((c->vm_end - c->vm_start) != size) {
+		printk(KERN_ERR "%s: freeing wrong coherent size (%ld != %d)\n",
+		       __func__, c->vm_end - c->vm_start, size);
+		dump_stack();
+		size = c->vm_end - c->vm_start;
+	}
+
+	arm_vmregion_free(&coherent_head, c);
+	return 1;
+}
+
+static void *__alloc_from_contiguous(struct device *dev, size_t size,
+				     pgprot_t prot, struct page **ret_page)
+{
+	unsigned long order = get_order(size);
+	size_t count = size >> PAGE_SHIFT;
+	struct page *page;
+
+	page = dma_alloc_from_contiguous(dev, count, order);
+	if (!page)
+		return NULL;
+
+	__dma_clear_buffer(page, size);
+	__dma_remap(page, size, prot);
+
+	*ret_page = page;
+	return page_address(page);
+}
+
+static void __free_from_contiguous(struct device *dev, struct page *page,
+				   size_t size)
+{
+	__dma_remap(page, size, pgprot_kernel);
+	dma_release_from_contiguous(dev, page, size >> PAGE_SHIFT);
+}
+
+static inline pgprot_t __get_dma_pgprot(struct dma_attrs *attrs, pgprot_t prot)
+{
+	prot = dma_get_attr(DMA_ATTR_WRITE_COMBINE, attrs) ?
+			    pgprot_writecombine(prot) :
+			    pgprot_dmacoherent(prot);
+	return prot;
+}
+
+#define nommu() 0
+
 #else	/* !CONFIG_MMU */
 
-#define __dma_alloc_remap(page, size, gfp, prot, c)	page_address(page)
-#define __dma_free_remap(addr, size)			do { } while (0)
+#define nommu() 1
+
+#define __get_dma_pgprot(attrs, prot)	__pgprot(0)
+#define __alloc_remap_buffer(dev, size, gfp, prot, ret, c)	NULL
+#define __alloc_from_pool(dev, size, ret_page, c)		NULL
+#define __alloc_from_contiguous(dev, size, prot, ret)		NULL
+#define __free_from_pool(cpu_addr, size)			0
+#define __free_from_contiguous(dev, page, size)			do { } while (0)
+#define __dma_free_remap(cpu_addr, size)			do { } while (0)
 
 #endif	/* CONFIG_MMU */
 
-static void *
-__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
-	    pgprot_t prot, const void *caller)
+static void *__alloc_simple_buffer(struct device *dev, size_t size, gfp_t gfp,
+				   struct page **ret_page)
+{
+	struct page *page;
+	page = __dma_alloc_buffer(dev, size, gfp);
+	if (!page)
+		return NULL;
+
+	*ret_page = page;
+	return page_address(page);
+}
+
+
+
+static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle,
+			 gfp_t gfp, pgprot_t prot, const void *caller)
 {
+	u64 mask = get_coherent_dma_mask(dev);
 	struct page *page;
 	void *addr;
 
+#ifdef CONFIG_DMA_API_DEBUG
+	u64 limit = (mask + 1) & ~mask;
+	if (limit && size >= limit) {
+		dev_warn(dev, "coherent allocation too big (requested %#x mask %#llx)\n",
+			size, mask);
+		return NULL;
+	}
+#endif
+
+	if (!mask)
+		return NULL;
+
+	if (mask < 0xffffffffULL)
+		gfp |= GFP_DMA;
+
 	/*
 	 * Following is a work-around (a.k.a. hack) to prevent pages
 	 * with __GFP_COMP being passed to split_page() which cannot
@@ -342,22 +699,20 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
 	 */
 	gfp &= ~(__GFP_COMP);
 
-	*handle = ~0;
+	*handle = DMA_ERROR_CODE;
 	size = PAGE_ALIGN(size);
 
-	page = __dma_alloc_buffer(dev, size, gfp);
-	if (!page)
-		return NULL;
-
-	if (!arch_is_coherent())
-		addr = __dma_alloc_remap(page, size, gfp, prot, caller);
+	if (arch_is_coherent() || nommu())
+		addr = __alloc_simple_buffer(dev, size, gfp, &page);
+	else if (cpu_architecture() < CPU_ARCH_ARMv6)
+		addr = __alloc_remap_buffer(dev, size, gfp, prot, &page, caller);
+	else if (gfp & GFP_ATOMIC)
+		addr = __alloc_from_pool(dev, size, &page, caller);
 	else
-		addr = page_address(page);
+		addr = __alloc_from_contiguous(dev, size, prot, &page);
 
 	if (addr)
 		*handle = pfn_to_dma(dev, page_to_pfn(page));
-	else
-		__dma_free_buffer(page, size);
 
 	return addr;
 }
@@ -366,138 +721,71 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
  * Allocate DMA-coherent memory space and return both the kernel remapped
  * virtual and bus address for that space.
  */
-void *
-dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp)
+void *arm_dma_alloc(struct device *dev, size_t size, dma_addr_t *handle,
+		    gfp_t gfp, struct dma_attrs *attrs)
 {
+	pgprot_t prot = __get_dma_pgprot(attrs, pgprot_kernel);
 	void *memory;
 
 	if (dma_alloc_from_coherent(dev, size, handle, &memory))
 		return memory;
 
-	return __dma_alloc(dev, size, handle, gfp,
-			   pgprot_dmacoherent(pgprot_kernel),
+	return __dma_alloc(dev, size, handle, gfp, prot,
 			   __builtin_return_address(0));
 }
-EXPORT_SYMBOL(dma_alloc_coherent);
 
 /*
- * Allocate a writecombining region, in much the same way as
- * dma_alloc_coherent above.
+ * Create userspace mapping for the DMA-coherent memory.
  */
-void *
-dma_alloc_writecombine(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp)
-{
-	return __dma_alloc(dev, size, handle, gfp,
-			   pgprot_writecombine(pgprot_kernel),
-			   __builtin_return_address(0));
-}
-EXPORT_SYMBOL(dma_alloc_writecombine);
-
-static int dma_mmap(struct device *dev, struct vm_area_struct *vma,
-		    void *cpu_addr, dma_addr_t dma_addr, size_t size)
+int arm_dma_mmap(struct device *dev, struct vm_area_struct *vma,
+		 void *cpu_addr, dma_addr_t dma_addr, size_t size,
+		 struct dma_attrs *attrs)
 {
 	int ret = -ENXIO;
 #ifdef CONFIG_MMU
-	unsigned long user_size, kern_size;
-	struct arm_vmregion *c;
+	unsigned long pfn = dma_to_pfn(dev, dma_addr);
+	vma->vm_page_prot = __get_dma_pgprot(attrs, vma->vm_page_prot);
 
-	user_size = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT;
+	if (dma_mmap_from_coherent(dev, vma, cpu_addr, size, &ret))
+		return ret;
 
-	c = arm_vmregion_find(&consistent_head, (unsigned long)cpu_addr);
-	if (c) {
-		unsigned long off = vma->vm_pgoff;
-
-		kern_size = (c->vm_end - c->vm_start) >> PAGE_SHIFT;
-
-		if (off < kern_size &&
-		    user_size <= (kern_size - off)) {
-			ret = remap_pfn_range(vma, vma->vm_start,
-					      page_to_pfn(c->vm_pages) + off,
-					      user_size << PAGE_SHIFT,
-					      vma->vm_page_prot);
-		}
-	}
+	ret = remap_pfn_range(vma, vma->vm_start,
+			      pfn + vma->vm_pgoff,
+			      vma->vm_end - vma->vm_start,
+			      vma->vm_page_prot);
 #endif	/* CONFIG_MMU */
 
 	return ret;
 }
 
-int dma_mmap_coherent(struct device *dev, struct vm_area_struct *vma,
-		      void *cpu_addr, dma_addr_t dma_addr, size_t size)
-{
-	vma->vm_page_prot = pgprot_dmacoherent(vma->vm_page_prot);
-	return dma_mmap(dev, vma, cpu_addr, dma_addr, size);
-}
-EXPORT_SYMBOL(dma_mmap_coherent);
-
-int dma_mmap_writecombine(struct device *dev, struct vm_area_struct *vma,
-			  void *cpu_addr, dma_addr_t dma_addr, size_t size)
-{
-	vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
-	return dma_mmap(dev, vma, cpu_addr, dma_addr, size);
-}
-EXPORT_SYMBOL(dma_mmap_writecombine);
-
 /*
- * free a page as defined by the above mapping.
- * Must not be called with IRQs disabled.
+ * Free a buffer as defined by the above mapping.
  */
-void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr_t handle)
+void arm_dma_free(struct device *dev, size_t size, void *cpu_addr,
+		  dma_addr_t handle, struct dma_attrs *attrs)
 {
-	WARN_ON(irqs_disabled());
+	struct page *page = pfn_to_page(dma_to_pfn(dev, handle));
 
 	if (dma_release_from_coherent(dev, get_order(size), cpu_addr))
 		return;
 
 	size = PAGE_ALIGN(size);
 
-	if (!arch_is_coherent())
+	if (arch_is_coherent() || nommu()) {
+		__dma_free_buffer(page, size);
+	} else if (cpu_architecture() < CPU_ARCH_ARMv6) {
 		__dma_free_remap(cpu_addr, size);
-
-	__dma_free_buffer(pfn_to_page(dma_to_pfn(dev, handle)), size);
-}
-EXPORT_SYMBOL(dma_free_coherent);
-
-/*
- * Make an area consistent for devices.
- * Note: Drivers should NOT use this function directly, as it will break
- * platforms with CONFIG_DMABOUNCE.
- * Use the driver DMA support - see dma-mapping.h (dma_sync_*)
- */
-void ___dma_single_cpu_to_dev(const void *kaddr, size_t size,
-	enum dma_data_direction dir)
-{
-	unsigned long paddr;
-
-	BUG_ON(!virt_addr_valid(kaddr) || !virt_addr_valid(kaddr + size - 1));
-
-	dmac_map_area(kaddr, size, dir);
-
-	paddr = __pa(kaddr);
-	if (dir == DMA_FROM_DEVICE) {
-		outer_inv_range(paddr, paddr + size);
+		__dma_free_buffer(page, size);
 	} else {
-		outer_clean_range(paddr, paddr + size);
-	}
-	/* FIXME: non-speculating: flush on bidirectional mappings? */
-}
-EXPORT_SYMBOL(___dma_single_cpu_to_dev);
-
-void ___dma_single_dev_to_cpu(const void *kaddr, size_t size,
-	enum dma_data_direction dir)
-{
-	BUG_ON(!virt_addr_valid(kaddr) || !virt_addr_valid(kaddr + size - 1));
-
-	/* FIXME: non-speculating: not required */
-	/* don't bother invalidating if DMA to device */
-	if (dir != DMA_TO_DEVICE) {
-		unsigned long paddr = __pa(kaddr);
-		outer_inv_range(paddr, paddr + size);
+		if (__free_from_pool(cpu_addr, size))
+			return;
+		/*
+		 * Non-atomic allocations cannot be freed with IRQs disabled
+		 */
+		WARN_ON(irqs_disabled());
+		__free_from_contiguous(dev, page, size);
 	}
-
-	dmac_unmap_area(kaddr, size, dir);
 }
-EXPORT_SYMBOL(___dma_single_dev_to_cpu);
 
 static void dma_cache_maint_page(struct page *page, unsigned long offset,
 	size_t size, enum dma_data_direction dir,
@@ -543,7 +831,13 @@ static void dma_cache_maint_page(struct page *page, unsigned long offset,
 	} while (left);
 }
 
-void ___dma_page_cpu_to_dev(struct page *page, unsigned long off,
+/*
+ * Make an area consistent for devices.
+ * Note: Drivers should NOT use this function directly, as it will break
+ * platforms with CONFIG_DMABOUNCE.
+ * Use the driver DMA support - see dma-mapping.h (dma_sync_*)
+ */
+static void __dma_page_cpu_to_dev(struct page *page, unsigned long off,
 	size_t size, enum dma_data_direction dir)
 {
 	unsigned long paddr;
@@ -558,9 +852,8 @@ void ___dma_page_cpu_to_dev(struct page *page, unsigned long off,
 	}
 	/* FIXME: non-speculating: flush on bidirectional mappings? */
 }
-EXPORT_SYMBOL(___dma_page_cpu_to_dev);
 
-void ___dma_page_dev_to_cpu(struct page *page, unsigned long off,
+static void __dma_page_dev_to_cpu(struct page *page, unsigned long off,
 	size_t size, enum dma_data_direction dir)
 {
 	unsigned long paddr = page_to_phys(page) + off;
@@ -578,10 +871,9 @@ void ___dma_page_dev_to_cpu(struct page *page, unsigned long off,
 	if (dir != DMA_TO_DEVICE && off == 0 && size >= PAGE_SIZE)
 		set_bit(PG_dcache_clean, &page->flags);
 }
-EXPORT_SYMBOL(___dma_page_dev_to_cpu);
 
 /**
- * dma_map_sg - map a set of SG buffers for streaming mode DMA
+ * arm_dma_map_sg - map a set of SG buffers for streaming mode DMA
  * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
  * @sg: list of buffers
  * @nents: number of buffers to map
@@ -596,32 +888,32 @@ EXPORT_SYMBOL(___dma_page_dev_to_cpu);
  * Device ownership issues as mentioned for dma_map_single are the same
  * here.
  */
-int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
-		enum dma_data_direction dir)
+int arm_dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
+		enum dma_data_direction dir, struct dma_attrs *attrs)
 {
+	struct dma_map_ops *ops = get_dma_ops(dev);
 	struct scatterlist *s;
 	int i, j;
 
-	BUG_ON(!valid_dma_direction(dir));
-
 	for_each_sg(sg, s, nents, i) {
-		s->dma_address = __dma_map_page(dev, sg_page(s), s->offset,
-						s->length, dir);
+#ifdef CONFIG_NEED_SG_DMA_LENGTH
+		s->dma_length = s->length;
+#endif
+		s->dma_address = ops->map_page(dev, sg_page(s), s->offset,
+						s->length, dir, attrs);
 		if (dma_mapping_error(dev, s->dma_address))
 			goto bad_mapping;
 	}
-	debug_dma_map_sg(dev, sg, nents, nents, dir);
 	return nents;
 
  bad_mapping:
 	for_each_sg(sg, s, i, j)
-		__dma_unmap_page(dev, sg_dma_address(s), sg_dma_len(s), dir);
+		ops->unmap_page(dev, sg_dma_address(s), sg_dma_len(s), dir, attrs);
 	return 0;
 }
-EXPORT_SYMBOL(dma_map_sg);
 
 /**
- * dma_unmap_sg - unmap a set of SG buffers mapped by dma_map_sg
+ * arm_dma_unmap_sg - unmap a set of SG buffers mapped by dma_map_sg
  * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
  * @sg: list of buffers
  * @nents: number of buffers to unmap (same as was passed to dma_map_sg)
@@ -630,70 +922,55 @@ EXPORT_SYMBOL(dma_map_sg);
  * Unmap a set of streaming mode DMA translations.  Again, CPU access
  * rules concerning calls here are the same as for dma_unmap_single().
  */
-void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nents,
-		enum dma_data_direction dir)
+void arm_dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nents,
+		enum dma_data_direction dir, struct dma_attrs *attrs)
 {
+	struct dma_map_ops *ops = get_dma_ops(dev);
 	struct scatterlist *s;
-	int i;
 
-	debug_dma_unmap_sg(dev, sg, nents, dir);
+	int i;
 
 	for_each_sg(sg, s, nents, i)
-		__dma_unmap_page(dev, sg_dma_address(s), sg_dma_len(s), dir);
+		ops->unmap_page(dev, sg_dma_address(s), sg_dma_len(s), dir, attrs);
 }
-EXPORT_SYMBOL(dma_unmap_sg);
 
 /**
- * dma_sync_sg_for_cpu
+ * arm_dma_sync_sg_for_cpu
  * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
  * @sg: list of buffers
  * @nents: number of buffers to map (returned from dma_map_sg)
  * @dir: DMA transfer direction (same as was passed to dma_map_sg)
  */
-void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
+void arm_dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
 			int nents, enum dma_data_direction dir)
 {
+	struct dma_map_ops *ops = get_dma_ops(dev);
 	struct scatterlist *s;
 	int i;
 
-	for_each_sg(sg, s, nents, i) {
-		if (!dmabounce_sync_for_cpu(dev, sg_dma_address(s), 0,
-					    sg_dma_len(s), dir))
-			continue;
-
-		__dma_page_dev_to_cpu(sg_page(s), s->offset,
-				      s->length, dir);
-	}
-
-	debug_dma_sync_sg_for_cpu(dev, sg, nents, dir);
+	for_each_sg(sg, s, nents, i)
+		ops->sync_single_for_cpu(dev, sg_dma_address(s), s->length,
+					 dir);
 }
-EXPORT_SYMBOL(dma_sync_sg_for_cpu);
 
 /**
- * dma_sync_sg_for_device
+ * arm_dma_sync_sg_for_device
  * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
  * @sg: list of buffers
  * @nents: number of buffers to map (returned from dma_map_sg)
  * @dir: DMA transfer direction (same as was passed to dma_map_sg)
  */
-void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
+void arm_dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
 			int nents, enum dma_data_direction dir)
 {
+	struct dma_map_ops *ops = get_dma_ops(dev);
 	struct scatterlist *s;
 	int i;
 
-	for_each_sg(sg, s, nents, i) {
-		if (!dmabounce_sync_for_device(dev, sg_dma_address(s), 0,
-					sg_dma_len(s), dir))
-			continue;
-
-		__dma_page_cpu_to_dev(sg_page(s), s->offset,
-				      s->length, dir);
-	}
-
-	debug_dma_sync_sg_for_device(dev, sg, nents, dir);
+	for_each_sg(sg, s, nents, i)
+		ops->sync_single_for_device(dev, sg_dma_address(s), s->length,
+					    dir);
 }
-EXPORT_SYMBOL(dma_sync_sg_for_device);
 
 /*
  * Return whether the given device DMA address mask can be supported
@@ -709,18 +986,15 @@ int dma_supported(struct device *dev, u64 mask)
 }
 EXPORT_SYMBOL(dma_supported);
 
-int dma_set_mask(struct device *dev, u64 dma_mask)
+static int arm_dma_set_mask(struct device *dev, u64 dma_mask)
 {
 	if (!dev->dma_mask || !dma_supported(dev, dma_mask))
 		return -EIO;
 
-#ifndef CONFIG_DMABOUNCE
 	*dev->dma_mask = dma_mask;
-#endif
 
 	return 0;
 }
-EXPORT_SYMBOL(dma_set_mask);
 
 #define PREALLOC_DMA_DEBUG_ENTRIES	4096
 
@@ -733,3 +1007,679 @@ static int __init dma_debug_do_init(void)
 	return 0;
 }
 fs_initcall(dma_debug_do_init);
+
+#ifdef CONFIG_ARM_DMA_USE_IOMMU
+
+/* IOMMU */
+
+static inline dma_addr_t __alloc_iova(struct dma_iommu_mapping *mapping,
+				      size_t size)
+{
+	unsigned int order = get_order(size);
+	unsigned int align = 0;
+	unsigned int count, start;
+	unsigned long flags;
+
+	count = ((PAGE_ALIGN(size) >> PAGE_SHIFT) +
+		 (1 << mapping->order) - 1) >> mapping->order;
+
+	if (order > mapping->order)
+		align = (1 << (order - mapping->order)) - 1;
+
+	spin_lock_irqsave(&mapping->lock, flags);
+	start = bitmap_find_next_zero_area(mapping->bitmap, mapping->bits, 0,
+					   count, align);
+	if (start > mapping->bits) {
+		spin_unlock_irqrestore(&mapping->lock, flags);
+		return DMA_ERROR_CODE;
+	}
+
+	bitmap_set(mapping->bitmap, start, count);
+	spin_unlock_irqrestore(&mapping->lock, flags);
+
+	return mapping->base + (start << (mapping->order + PAGE_SHIFT));
+}
+
+static inline void __free_iova(struct dma_iommu_mapping *mapping,
+			       dma_addr_t addr, size_t size)
+{
+	unsigned int start = (addr - mapping->base) >>
+			     (mapping->order + PAGE_SHIFT);
+	unsigned int count = ((size >> PAGE_SHIFT) +
+			      (1 << mapping->order) - 1) >> mapping->order;
+	unsigned long flags;
+
+	spin_lock_irqsave(&mapping->lock, flags);
+	bitmap_clear(mapping->bitmap, start, count);
+	spin_unlock_irqrestore(&mapping->lock, flags);
+}
+
+static struct page **__iommu_alloc_buffer(struct device *dev, size_t size, gfp_t gfp)
+{
+	struct page **pages;
+	int count = size >> PAGE_SHIFT;
+	int array_size = count * sizeof(struct page *);
+	int i = 0;
+
+	if (array_size <= PAGE_SIZE)
+		pages = kzalloc(array_size, gfp);
+	else
+		pages = vzalloc(array_size);
+	if (!pages)
+		return NULL;
+
+	while (count) {
+		int j, order = __ffs(count);
+
+		pages[i] = alloc_pages(gfp | __GFP_NOWARN, order);
+		while (!pages[i] && order)
+			pages[i] = alloc_pages(gfp | __GFP_NOWARN, --order);
+		if (!pages[i])
+			goto error;
+
+		if (order)
+			split_page(pages[i], order);
+		j = 1 << order;
+		while (--j)
+			pages[i + j] = pages[i] + j;
+
+		__dma_clear_buffer(pages[i], PAGE_SIZE << order);
+		i += 1 << order;
+		count -= 1 << order;
+	}
+
+	return pages;
+error:
+	while (--i)
+		if (pages[i])
+			__free_pages(pages[i], 0);
+	if (array_size < PAGE_SIZE)
+		kfree(pages);
+	else
+		vfree(pages);
+	return NULL;
+}
+
+static int __iommu_free_buffer(struct device *dev, struct page **pages, size_t size)
+{
+	int count = size >> PAGE_SHIFT;
+	int array_size = count * sizeof(struct page *);
+	int i;
+	for (i = 0; i < count; i++)
+		if (pages[i])
+			__free_pages(pages[i], 0);
+	if (array_size < PAGE_SIZE)
+		kfree(pages);
+	else
+		vfree(pages);
+	return 0;
+}
+
+/*
+ * Create a CPU mapping for a specified pages
+ */
+static void *
+__iommu_alloc_remap(struct page **pages, size_t size, gfp_t gfp, pgprot_t prot)
+{
+	struct arm_vmregion *c;
+	size_t align;
+	size_t count = size >> PAGE_SHIFT;
+	int bit;
+
+	if (!consistent_pte[0]) {
+		pr_err("%s: not initialised\n", __func__);
+		dump_stack();
+		return NULL;
+	}
+
+	/*
+	 * Align the virtual region allocation - maximum alignment is
+	 * a section size, minimum is a page size.  This helps reduce
+	 * fragmentation of the DMA space, and also prevents allocations
+	 * smaller than a section from crossing a section boundary.
+	 */
+	bit = fls(size - 1);
+	if (bit > SECTION_SHIFT)
+		bit = SECTION_SHIFT;
+	align = 1 << bit;
+
+	/*
+	 * Allocate a virtual address in the consistent mapping region.
+	 */
+	c = arm_vmregion_alloc(&consistent_head, align, size,
+			    gfp & ~(__GFP_DMA | __GFP_HIGHMEM), NULL);
+	if (c) {
+		pte_t *pte;
+		int idx = CONSISTENT_PTE_INDEX(c->vm_start);
+		int i = 0;
+		u32 off = CONSISTENT_OFFSET(c->vm_start) & (PTRS_PER_PTE-1);
+
+		pte = consistent_pte[idx] + off;
+		c->priv = pages;
+
+		do {
+			BUG_ON(!pte_none(*pte));
+
+			set_pte_ext(pte, mk_pte(pages[i], prot), 0);
+			pte++;
+			off++;
+			i++;
+			if (off >= PTRS_PER_PTE) {
+				off = 0;
+				pte = consistent_pte[++idx];
+			}
+		} while (i < count);
+
+		dsb();
+
+		return (void *)c->vm_start;
+	}
+	return NULL;
+}
+
+/*
+ * Create a mapping in device IO address space for specified pages
+ */
+static dma_addr_t
+__iommu_create_mapping(struct device *dev, struct page **pages, size_t size)
+{
+	struct dma_iommu_mapping *mapping = dev->archdata.mapping;
+	unsigned int count = PAGE_ALIGN(size) >> PAGE_SHIFT;
+	dma_addr_t dma_addr, iova;
+	int i, ret = DMA_ERROR_CODE;
+
+	dma_addr = __alloc_iova(mapping, size);
+	if (dma_addr == DMA_ERROR_CODE)
+		return dma_addr;
+
+	iova = dma_addr;
+	for (i = 0; i < count; ) {
+		unsigned int next_pfn = page_to_pfn(pages[i]) + 1;
+		phys_addr_t phys = page_to_phys(pages[i]);
+		unsigned int len, j;
+
+		for (j = i + 1; j < count; j++, next_pfn++)
+			if (page_to_pfn(pages[j]) != next_pfn)
+				break;
+
+		len = (j - i) << PAGE_SHIFT;
+		ret = iommu_map(mapping->domain, iova, phys, len, 0);
+		if (ret < 0)
+			goto fail;
+		iova += len;
+		i = j;
+	}
+	return dma_addr;
+fail:
+	iommu_unmap(mapping->domain, dma_addr, iova-dma_addr);
+	__free_iova(mapping, dma_addr, size);
+	return DMA_ERROR_CODE;
+}
+
+static int __iommu_remove_mapping(struct device *dev, dma_addr_t iova, size_t size)
+{
+	struct dma_iommu_mapping *mapping = dev->archdata.mapping;
+
+	/*
+	 * add optional in-page offset from iova to size and align
+	 * result to page size
+	 */
+	size = PAGE_ALIGN((iova & ~PAGE_MASK) + size);
+	iova &= PAGE_MASK;
+
+	iommu_unmap(mapping->domain, iova, size);
+	__free_iova(mapping, iova, size);
+	return 0;
+}
+
+static void *arm_iommu_alloc_attrs(struct device *dev, size_t size,
+	    dma_addr_t *handle, gfp_t gfp, struct dma_attrs *attrs)
+{
+	pgprot_t prot = __get_dma_pgprot(attrs, pgprot_kernel);
+	struct page **pages;
+	void *addr = NULL;
+
+	*handle = DMA_ERROR_CODE;
+	size = PAGE_ALIGN(size);
+
+	pages = __iommu_alloc_buffer(dev, size, gfp);
+	if (!pages)
+		return NULL;
+
+	*handle = __iommu_create_mapping(dev, pages, size);
+	if (*handle == DMA_ERROR_CODE)
+		goto err_buffer;
+
+	addr = __iommu_alloc_remap(pages, size, gfp, prot);
+	if (!addr)
+		goto err_mapping;
+
+	return addr;
+
+err_mapping:
+	__iommu_remove_mapping(dev, *handle, size);
+err_buffer:
+	__iommu_free_buffer(dev, pages, size);
+	return NULL;
+}
+
+static int arm_iommu_mmap_attrs(struct device *dev, struct vm_area_struct *vma,
+		    void *cpu_addr, dma_addr_t dma_addr, size_t size,
+		    struct dma_attrs *attrs)
+{
+	struct arm_vmregion *c;
+
+	vma->vm_page_prot = __get_dma_pgprot(attrs, vma->vm_page_prot);
+	c = arm_vmregion_find(&consistent_head, (unsigned long)cpu_addr);
+
+	if (c) {
+		struct page **pages = c->priv;
+
+		unsigned long uaddr = vma->vm_start;
+		unsigned long usize = vma->vm_end - vma->vm_start;
+		int i = 0;
+
+		do {
+			int ret;
+
+			ret = vm_insert_page(vma, uaddr, pages[i++]);
+			if (ret) {
+				pr_err("Remapping memory, error: %d\n", ret);
+				return ret;
+			}
+
+			uaddr += PAGE_SIZE;
+			usize -= PAGE_SIZE;
+		} while (usize > 0);
+	}
+	return 0;
+}
+
+/*
+ * free a page as defined by the above mapping.
+ * Must not be called with IRQs disabled.
+ */
+void arm_iommu_free_attrs(struct device *dev, size_t size, void *cpu_addr,
+			  dma_addr_t handle, struct dma_attrs *attrs)
+{
+	struct arm_vmregion *c;
+	size = PAGE_ALIGN(size);
+
+	c = arm_vmregion_find(&consistent_head, (unsigned long)cpu_addr);
+	if (c) {
+		struct page **pages = c->priv;
+		__dma_free_remap(cpu_addr, size);
+		__iommu_remove_mapping(dev, handle, size);
+		__iommu_free_buffer(dev, pages, size);
+	}
+}
+
+/*
+ * Map a part of the scatter-gather list into contiguous io address space
+ */
+static int __map_sg_chunk(struct device *dev, struct scatterlist *sg,
+			  size_t size, dma_addr_t *handle,
+			  enum dma_data_direction dir)
+{
+	struct dma_iommu_mapping *mapping = dev->archdata.mapping;
+	dma_addr_t iova, iova_base;
+	int ret = 0;
+	unsigned int count;
+	struct scatterlist *s;
+
+	size = PAGE_ALIGN(size);
+	*handle = DMA_ERROR_CODE;
+
+	iova_base = iova = __alloc_iova(mapping, size);
+	if (iova == DMA_ERROR_CODE)
+		return -ENOMEM;
+
+	for (count = 0, s = sg; count < (size >> PAGE_SHIFT); s = sg_next(s)) {
+		phys_addr_t phys = page_to_phys(sg_page(s));
+		unsigned int len = PAGE_ALIGN(s->offset + s->length);
+
+		if (!arch_is_coherent())
+			__dma_page_cpu_to_dev(sg_page(s), s->offset, s->length, dir);
+
+		ret = iommu_map(mapping->domain, iova, phys, len, 0);
+		if (ret < 0)
+			goto fail;
+		count += len >> PAGE_SHIFT;
+		iova += len;
+	}
+	*handle = iova_base;
+
+	return 0;
+fail:
+	iommu_unmap(mapping->domain, iova_base, count * PAGE_SIZE);
+	__free_iova(mapping, iova_base, size);
+	return ret;
+}
+
+/**
+ * arm_iommu_map_sg - map a set of SG buffers for streaming mode DMA
+ * @dev: valid struct device pointer
+ * @sg: list of buffers
+ * @nents: number of buffers to map
+ * @dir: DMA transfer direction
+ *
+ * Map a set of buffers described by scatterlist in streaming mode for DMA.
+ * The scatter gather list elements are merged together (if possible) and
+ * tagged with the appropriate dma address and length. They are obtained via
+ * sg_dma_{address,length}.
+ */
+int arm_iommu_map_sg(struct device *dev, struct scatterlist *sg, int nents,
+		     enum dma_data_direction dir, struct dma_attrs *attrs)
+{
+	struct scatterlist *s = sg, *dma = sg, *start = sg;
+	int i, count = 0;
+	unsigned int offset = s->offset;
+	unsigned int size = s->offset + s->length;
+	unsigned int max = dma_get_max_seg_size(dev);
+
+	for (i = 1; i < nents; i++) {
+		s = sg_next(s);
+
+		s->dma_address = DMA_ERROR_CODE;
+		s->dma_length = 0;
+
+		if (s->offset || (size & ~PAGE_MASK) || size + s->length > max) {
+			if (__map_sg_chunk(dev, start, size, &dma->dma_address,
+			    dir) < 0)
+				goto bad_mapping;
+
+			dma->dma_address += offset;
+			dma->dma_length = size - offset;
+
+			size = offset = s->offset;
+			start = s;
+			dma = sg_next(dma);
+			count += 1;
+		}
+		size += s->length;
+	}
+	if (__map_sg_chunk(dev, start, size, &dma->dma_address, dir) < 0)
+		goto bad_mapping;
+
+	dma->dma_address += offset;
+	dma->dma_length = size - offset;
+
+	return count+1;
+
+bad_mapping:
+	for_each_sg(sg, s, count, i)
+		__iommu_remove_mapping(dev, sg_dma_address(s), sg_dma_len(s));
+	return 0;
+}
+
+/**
+ * arm_iommu_unmap_sg - unmap a set of SG buffers mapped by dma_map_sg
+ * @dev: valid struct device pointer
+ * @sg: list of buffers
+ * @nents: number of buffers to unmap (same as was passed to dma_map_sg)
+ * @dir: DMA transfer direction (same as was passed to dma_map_sg)
+ *
+ * Unmap a set of streaming mode DMA translations.  Again, CPU access
+ * rules concerning calls here are the same as for dma_unmap_single().
+ */
+void arm_iommu_unmap_sg(struct device *dev, struct scatterlist *sg, int nents,
+			enum dma_data_direction dir, struct dma_attrs *attrs)
+{
+	struct scatterlist *s;
+	int i;
+
+	for_each_sg(sg, s, nents, i) {
+		if (sg_dma_len(s))
+			__iommu_remove_mapping(dev, sg_dma_address(s),
+					       sg_dma_len(s));
+		if (!arch_is_coherent())
+			__dma_page_dev_to_cpu(sg_page(s), s->offset,
+					      s->length, dir);
+	}
+}
+
+/**
+ * arm_iommu_sync_sg_for_cpu
+ * @dev: valid struct device pointer
+ * @sg: list of buffers
+ * @nents: number of buffers to map (returned from dma_map_sg)
+ * @dir: DMA transfer direction (same as was passed to dma_map_sg)
+ */
+void arm_iommu_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
+			int nents, enum dma_data_direction dir)
+{
+	struct scatterlist *s;
+	int i;
+
+	for_each_sg(sg, s, nents, i)
+		if (!arch_is_coherent())
+			__dma_page_dev_to_cpu(sg_page(s), s->offset, s->length, dir);
+
+}
+
+/**
+ * arm_iommu_sync_sg_for_device
+ * @dev: valid struct device pointer
+ * @sg: list of buffers
+ * @nents: number of buffers to map (returned from dma_map_sg)
+ * @dir: DMA transfer direction (same as was passed to dma_map_sg)
+ */
+void arm_iommu_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
+			int nents, enum dma_data_direction dir)
+{
+	struct scatterlist *s;
+	int i;
+
+	for_each_sg(sg, s, nents, i)
+		if (!arch_is_coherent())
+			__dma_page_cpu_to_dev(sg_page(s), s->offset, s->length, dir);
+}
+
+
+/**
+ * arm_iommu_map_page
+ * @dev: valid struct device pointer
+ * @page: page that buffer resides in
+ * @offset: offset into page for start of buffer
+ * @size: size of buffer to map
+ * @dir: DMA transfer direction
+ *
+ * IOMMU aware version of arm_dma_map_page()
+ */
+static dma_addr_t arm_iommu_map_page(struct device *dev, struct page *page,
+	     unsigned long offset, size_t size, enum dma_data_direction dir,
+	     struct dma_attrs *attrs)
+{
+	struct dma_iommu_mapping *mapping = dev->archdata.mapping;
+	dma_addr_t dma_addr;
+	int ret, len = PAGE_ALIGN(size + offset);
+
+	if (!arch_is_coherent())
+		__dma_page_cpu_to_dev(page, offset, size, dir);
+
+	dma_addr = __alloc_iova(mapping, len);
+	if (dma_addr == DMA_ERROR_CODE)
+		return dma_addr;
+
+	ret = iommu_map(mapping->domain, dma_addr, page_to_phys(page), len, 0);
+	if (ret < 0)
+		goto fail;
+
+	return dma_addr + offset;
+fail:
+	__free_iova(mapping, dma_addr, len);
+	return DMA_ERROR_CODE;
+}
+
+/**
+ * arm_iommu_unmap_page
+ * @dev: valid struct device pointer
+ * @handle: DMA address of buffer
+ * @size: size of buffer (same as passed to dma_map_page)
+ * @dir: DMA transfer direction (same as passed to dma_map_page)
+ *
+ * IOMMU aware version of arm_dma_unmap_page()
+ */
+static void arm_iommu_unmap_page(struct device *dev, dma_addr_t handle,
+		size_t size, enum dma_data_direction dir,
+		struct dma_attrs *attrs)
+{
+	struct dma_iommu_mapping *mapping = dev->archdata.mapping;
+	dma_addr_t iova = handle & PAGE_MASK;
+	struct page *page = phys_to_page(iommu_iova_to_phys(mapping->domain, iova));
+	int offset = handle & ~PAGE_MASK;
+	int len = PAGE_ALIGN(size + offset);
+
+	if (!iova)
+		return;
+
+	if (!arch_is_coherent())
+		__dma_page_dev_to_cpu(page, offset, size, dir);
+
+	iommu_unmap(mapping->domain, iova, len);
+	__free_iova(mapping, iova, len);
+}
+
+static void arm_iommu_sync_single_for_cpu(struct device *dev,
+		dma_addr_t handle, size_t size, enum dma_data_direction dir)
+{
+	struct dma_iommu_mapping *mapping = dev->archdata.mapping;
+	dma_addr_t iova = handle & PAGE_MASK;
+	struct page *page = phys_to_page(iommu_iova_to_phys(mapping->domain, iova));
+	unsigned int offset = handle & ~PAGE_MASK;
+
+	if (!iova)
+		return;
+
+	if (!arch_is_coherent())
+		__dma_page_dev_to_cpu(page, offset, size, dir);
+}
+
+static void arm_iommu_sync_single_for_device(struct device *dev,
+		dma_addr_t handle, size_t size, enum dma_data_direction dir)
+{
+	struct dma_iommu_mapping *mapping = dev->archdata.mapping;
+	dma_addr_t iova = handle & PAGE_MASK;
+	struct page *page = phys_to_page(iommu_iova_to_phys(mapping->domain, iova));
+	unsigned int offset = handle & ~PAGE_MASK;
+
+	if (!iova)
+		return;
+
+	__dma_page_cpu_to_dev(page, offset, size, dir);
+}
+
+struct dma_map_ops iommu_ops = {
+	.alloc		= arm_iommu_alloc_attrs,
+	.free		= arm_iommu_free_attrs,
+	.mmap		= arm_iommu_mmap_attrs,
+
+	.map_page		= arm_iommu_map_page,
+	.unmap_page		= arm_iommu_unmap_page,
+	.sync_single_for_cpu	= arm_iommu_sync_single_for_cpu,
+	.sync_single_for_device	= arm_iommu_sync_single_for_device,
+
+	.map_sg			= arm_iommu_map_sg,
+	.unmap_sg		= arm_iommu_unmap_sg,
+	.sync_sg_for_cpu	= arm_iommu_sync_sg_for_cpu,
+	.sync_sg_for_device	= arm_iommu_sync_sg_for_device,
+};
+
+/**
+ * arm_iommu_create_mapping
+ * @bus: pointer to the bus holding the client device (for IOMMU calls)
+ * @base: start address of the valid IO address space
+ * @size: size of the valid IO address space
+ * @order: accuracy of the IO addresses allocations
+ *
+ * Creates a mapping structure which holds information about used/unused
+ * IO address ranges, which is required to perform memory allocation and
+ * mapping with IOMMU aware functions.
+ *
+ * The client device need to be attached to the mapping with
+ * arm_iommu_attach_device function.
+ */
+struct dma_iommu_mapping *
+arm_iommu_create_mapping(struct bus_type *bus, dma_addr_t base, size_t size,
+			 int order)
+{
+	unsigned int count = size >> (PAGE_SHIFT + order);
+	unsigned int bitmap_size = BITS_TO_LONGS(count) * sizeof(long);
+	struct dma_iommu_mapping *mapping;
+	int err = -ENOMEM;
+
+	if (!count)
+		return ERR_PTR(-EINVAL);
+
+	mapping = kzalloc(sizeof(struct dma_iommu_mapping), GFP_KERNEL);
+	if (!mapping)
+		goto err;
+
+	mapping->bitmap = kzalloc(bitmap_size, GFP_KERNEL);
+	if (!mapping->bitmap)
+		goto err2;
+
+	mapping->base = base;
+	mapping->bits = BITS_PER_BYTE * bitmap_size;
+	mapping->order = order;
+	spin_lock_init(&mapping->lock);
+
+	mapping->domain = iommu_domain_alloc(bus);
+	if (!mapping->domain)
+		goto err3;
+
+	kref_init(&mapping->kref);
+	return mapping;
+err3:
+	kfree(mapping->bitmap);
+err2:
+	kfree(mapping);
+err:
+	return ERR_PTR(err);
+}
+
+static void release_iommu_mapping(struct kref *kref)
+{
+	struct dma_iommu_mapping *mapping =
+		container_of(kref, struct dma_iommu_mapping, kref);
+
+	iommu_domain_free(mapping->domain);
+	kfree(mapping->bitmap);
+	kfree(mapping);
+}
+
+void arm_iommu_release_mapping(struct dma_iommu_mapping *mapping)
+{
+	if (mapping)
+		kref_put(&mapping->kref, release_iommu_mapping);
+}
+
+/**
+ * arm_iommu_attach_device
+ * @dev: valid struct device pointer
+ * @mapping: io address space mapping structure (returned from
+ *	arm_iommu_create_mapping)
+ *
+ * Attaches specified io address space mapping to the provided device,
+ * this replaces the dma operations (dma_map_ops pointer) with the
+ * IOMMU aware version. More than one client might be attached to
+ * the same io address space mapping.
+ */
+int arm_iommu_attach_device(struct device *dev,
+			    struct dma_iommu_mapping *mapping)
+{
+	int err;
+
+	err = iommu_attach_device(mapping->domain, dev);
+	if (err)
+		return err;
+
+	kref_get(&mapping->kref);
+	dev->archdata.mapping = mapping;
+	set_dma_ops(dev, &iommu_ops);
+
+	pr_info("Attached IOMMU controller to %s device.\n", dev_name(dev));
+	return 0;
+}
+
+#endif
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index 9055b5a84ec5..c3bd83450227 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -247,7 +247,9 @@ good_area:
 	return handle_mm_fault(mm, vma, addr & PAGE_MASK, flags);
 
 check_stack:
-	if (vma->vm_flags & VM_GROWSDOWN && !expand_stack(vma, addr))
+	/* Don't allow expansion below FIRST_USER_ADDRESS */
+	if (vma->vm_flags & VM_GROWSDOWN &&
+	    addr >= FIRST_USER_ADDRESS && !expand_stack(vma, addr))
 		goto good_area;
 out:
 	return fault;
@@ -320,7 +322,7 @@ retry:
 	 */
 
 	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, addr);
-	if (flags & FAULT_FLAG_ALLOW_RETRY) {
+	if (!(fault & VM_FAULT_ERROR) && flags & FAULT_FLAG_ALLOW_RETRY) {
 		if (fault & VM_FAULT_MAJOR) {
 			tsk->maj_flt++;
 			perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1,
@@ -430,9 +432,6 @@ do_translation_fault(unsigned long addr, unsigned int fsr,
 
 	index = pgd_index(addr);
 
-	/*
-	 * FIXME: CP15 C1 is write only on ARMv3 architectures.
-	 */
 	pgd = cpu_get_pgd() + index;
 	pgd_k = init_mm.pgd + index;
 
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 595079fa9d1d..c21d06c7dd7e 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -20,6 +20,7 @@
 #include <linux/highmem.h>
 #include <linux/gfp.h>
 #include <linux/memblock.h>
+#include <linux/dma-contiguous.h>
 
 #include <asm/mach-types.h>
 #include <asm/memblock.h>
@@ -226,6 +227,17 @@ static void __init arm_adjust_dma_zone(unsigned long *size, unsigned long *hole,
 }
 #endif
 
+void __init setup_dma_zone(struct machine_desc *mdesc)
+{
+#ifdef CONFIG_ZONE_DMA
+	if (mdesc->dma_zone_size) {
+		arm_dma_zone_size = mdesc->dma_zone_size;
+		arm_dma_limit = PHYS_OFFSET + arm_dma_zone_size - 1;
+	} else
+		arm_dma_limit = 0xffffffff;
+#endif
+}
+
 static void __init arm_bootmem_free(unsigned long min, unsigned long max_low,
 	unsigned long max_high)
 {
@@ -273,12 +285,9 @@ static void __init arm_bootmem_free(unsigned long min, unsigned long max_low,
 	 * Adjust the sizes according to any special requirements for
 	 * this machine type.
 	 */
-	if (arm_dma_zone_size) {
+	if (arm_dma_zone_size)
 		arm_adjust_dma_zone(zone_size, zhole_size,
 			arm_dma_zone_size >> PAGE_SHIFT);
-		arm_dma_limit = PHYS_OFFSET + arm_dma_zone_size - 1;
-	} else
-		arm_dma_limit = 0xffffffff;
 #endif
 
 	free_area_init_node(0, zone_size, min, zhole_size);
@@ -293,11 +302,11 @@ EXPORT_SYMBOL(pfn_valid);
 #endif
 
 #ifndef CONFIG_SPARSEMEM
-static void arm_memory_present(void)
+static void __init arm_memory_present(void)
 {
 }
 #else
-static void arm_memory_present(void)
+static void __init arm_memory_present(void)
 {
 	struct memblock_region *reg;
 
@@ -364,6 +373,12 @@ void __init arm_memblock_init(struct meminfo *mi, struct machine_desc *mdesc)
 	if (mdesc->reserve)
 		mdesc->reserve();
 
+	/*
+	 * reserve memory for DMA contigouos allocations,
+	 * must come from DMA area inside low memory
+	 */
+	dma_contiguous_reserve(min(arm_dma_limit, arm_lowmem_limit));
+
 	arm_memblock_steal_permitted = false;
 	memblock_allow_resize();
 	memblock_dump_all();
diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h
index 27f4a619b35d..93dc0c17cdcb 100644
--- a/arch/arm/mm/mm.h
+++ b/arch/arm/mm/mm.h
@@ -67,5 +67,8 @@ extern u32 arm_dma_limit;
 #define arm_dma_limit ((u32)~0)
 #endif
 
+extern phys_addr_t arm_lowmem_limit;
+
 void __init bootmem_init(void);
 void arm_mm_memblock_reserve(void);
+void dma_contiguous_remap(void);
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index b86f8933ff91..e5dad60b558b 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -288,6 +288,11 @@ static struct mem_type mem_types[] = {
 				PMD_SECT_UNCACHED | PMD_SECT_XN,
 		.domain    = DOMAIN_KERNEL,
 	},
+	[MT_MEMORY_DMA_READY] = {
+		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY,
+		.prot_l1   = PMD_TYPE_TABLE,
+		.domain    = DOMAIN_KERNEL,
+	},
 };
 
 const struct mem_type *get_mem_type(unsigned int type)
@@ -429,6 +434,7 @@ static void __init build_mem_type_table(void)
 	if (arch_is_coherent() && cpu_is_xsc3()) {
 		mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S;
 		mem_types[MT_MEMORY].prot_pte |= L_PTE_SHARED;
+		mem_types[MT_MEMORY_DMA_READY].prot_pte |= L_PTE_SHARED;
 		mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_S;
 		mem_types[MT_MEMORY_NONCACHED].prot_pte |= L_PTE_SHARED;
 	}
@@ -460,6 +466,7 @@ static void __init build_mem_type_table(void)
 			mem_types[MT_DEVICE_CACHED].prot_pte |= L_PTE_SHARED;
 			mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S;
 			mem_types[MT_MEMORY].prot_pte |= L_PTE_SHARED;
+			mem_types[MT_MEMORY_DMA_READY].prot_pte |= L_PTE_SHARED;
 			mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_S;
 			mem_types[MT_MEMORY_NONCACHED].prot_pte |= L_PTE_SHARED;
 		}
@@ -489,7 +496,8 @@ static void __init build_mem_type_table(void)
 	 */
 	for (i = 0; i < ARRAY_SIZE(mem_types); i++) {
 		mem_types[i].prot_pte |= PTE_EXT_AF;
-		mem_types[i].prot_sect |= PMD_SECT_AF;
+		if (mem_types[i].prot_sect)
+			mem_types[i].prot_sect |= PMD_SECT_AF;
 	}
 	kern_pgprot |= PTE_EXT_AF;
 	vecs_pgprot |= PTE_EXT_AF;
@@ -511,6 +519,7 @@ static void __init build_mem_type_table(void)
 	mem_types[MT_HIGH_VECTORS].prot_l1 |= ecc_mask;
 	mem_types[MT_MEMORY].prot_sect |= ecc_mask | cp->pmd;
 	mem_types[MT_MEMORY].prot_pte |= kern_pgprot;
+	mem_types[MT_MEMORY_DMA_READY].prot_pte |= kern_pgprot;
 	mem_types[MT_MEMORY_NONCACHED].prot_sect |= ecc_mask;
 	mem_types[MT_ROM].prot_sect |= cp->pmd;
 
@@ -595,7 +604,7 @@ static void __init alloc_init_section(pud_t *pud, unsigned long addr,
 	 * L1 entries, whereas PGDs refer to a group of L1 entries making
 	 * up one logical pointer to an L2 table.
 	 */
-	if (((addr | end | phys) & ~SECTION_MASK) == 0) {
+	if (type->prot_sect && ((addr | end | phys) & ~SECTION_MASK) == 0) {
 		pmd_t *p = pmd;
 
 #ifndef CONFIG_ARM_LPAE
@@ -618,8 +627,8 @@ static void __init alloc_init_section(pud_t *pud, unsigned long addr,
 	}
 }
 
-static void alloc_init_pud(pgd_t *pgd, unsigned long addr, unsigned long end,
-	unsigned long phys, const struct mem_type *type)
+static void __init alloc_init_pud(pgd_t *pgd, unsigned long addr,
+	unsigned long end, unsigned long phys, const struct mem_type *type)
 {
 	pud_t *pud = pud_offset(pgd, addr);
 	unsigned long next;
@@ -813,7 +822,7 @@ static int __init early_vmalloc(char *arg)
 }
 early_param("vmalloc", early_vmalloc);
 
-static phys_addr_t lowmem_limit __initdata = 0;
+phys_addr_t arm_lowmem_limit __initdata = 0;
 
 void __init sanity_check_meminfo(void)
 {
@@ -896,8 +905,8 @@ void __init sanity_check_meminfo(void)
 			bank->size = newsize;
 		}
 #endif
-		if (!bank->highmem && bank->start + bank->size > lowmem_limit)
-			lowmem_limit = bank->start + bank->size;
+		if (!bank->highmem && bank->start + bank->size > arm_lowmem_limit)
+			arm_lowmem_limit = bank->start + bank->size;
 
 		j++;
 	}
@@ -922,8 +931,8 @@ void __init sanity_check_meminfo(void)
 	}
 #endif
 	meminfo.nr_banks = j;
-	high_memory = __va(lowmem_limit - 1) + 1;
-	memblock_set_current_limit(lowmem_limit);
+	high_memory = __va(arm_lowmem_limit - 1) + 1;
+	memblock_set_current_limit(arm_lowmem_limit);
 }
 
 static inline void prepare_page_table(void)
@@ -948,8 +957,8 @@ static inline void prepare_page_table(void)
 	 * Find the end of the first block of lowmem.
 	 */
 	end = memblock.memory.regions[0].base + memblock.memory.regions[0].size;
-	if (end >= lowmem_limit)
-		end = lowmem_limit;
+	if (end >= arm_lowmem_limit)
+		end = arm_lowmem_limit;
 
 	/*
 	 * Clear out all the kernel space mappings, except for the first
@@ -1092,8 +1101,8 @@ static void __init map_lowmem(void)
 		phys_addr_t end = start + reg->size;
 		struct map_desc map;
 
-		if (end > lowmem_limit)
-			end = lowmem_limit;
+		if (end > arm_lowmem_limit)
+			end = arm_lowmem_limit;
 		if (start >= end)
 			break;
 
@@ -1114,11 +1123,12 @@ void __init paging_init(struct machine_desc *mdesc)
 {
 	void *zero_page;
 
-	memblock_set_current_limit(lowmem_limit);
+	memblock_set_current_limit(arm_lowmem_limit);
 
 	build_mem_type_table();
 	prepare_page_table();
 	map_lowmem();
+	dma_contiguous_remap();
 	devicemaps_init(mdesc);
 	kmap_init();
 
diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c
index 6486d2f253cd..d51225f90ae2 100644
--- a/arch/arm/mm/nommu.c
+++ b/arch/arm/mm/nommu.c
@@ -13,6 +13,7 @@
 #include <asm/sections.h>
 #include <asm/page.h>
 #include <asm/setup.h>
+#include <asm/traps.h>
 #include <asm/mach/arch.h>
 
 #include "mm.h"
@@ -39,6 +40,7 @@ void __init sanity_check_meminfo(void)
  */
 void __init paging_init(struct machine_desc *mdesc)
 {
+	early_trap_init((void *)CONFIG_VECTORS_BASE);
 	bootmem_init();
 }
 
diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S
index 234951345eb3..0650bb87c1e3 100644
--- a/arch/arm/mm/proc-arm1020.S
+++ b/arch/arm/mm/proc-arm1020.S
@@ -241,6 +241,7 @@ ENTRY(arm1020_coherent_user_range)
 	cmp	r0, r1
 	blo	1b
 	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
+	mov	r0, #0
 	mov	pc, lr
 
 /*
diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S
index c244b06caac9..4188478325a6 100644
--- a/arch/arm/mm/proc-arm1020e.S
+++ b/arch/arm/mm/proc-arm1020e.S
@@ -235,6 +235,7 @@ ENTRY(arm1020e_coherent_user_range)
 	cmp	r0, r1
 	blo	1b
 	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
+	mov	r0, #0
 	mov	pc, lr
 
 /*
diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S
index 38fe22efd18f..33c68824bff0 100644
--- a/arch/arm/mm/proc-arm1022.S
+++ b/arch/arm/mm/proc-arm1022.S
@@ -224,6 +224,7 @@ ENTRY(arm1022_coherent_user_range)
 	cmp	r0, r1
 	blo	1b
 	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
+	mov	r0, #0
 	mov	pc, lr
 
 /*
diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S
index 3eb9c3c26c75..fbc1d5fc24dc 100644
--- a/arch/arm/mm/proc-arm1026.S
+++ b/arch/arm/mm/proc-arm1026.S
@@ -218,6 +218,7 @@ ENTRY(arm1026_coherent_user_range)
 	cmp	r0, r1
 	blo	1b
 	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
+	mov	r0, #0
 	mov	pc, lr
 
 /*
diff --git a/arch/arm/mm/proc-arm6_7.S b/arch/arm/mm/proc-arm6_7.S
deleted file mode 100644
index 4fbeb5b8e6c2..000000000000
--- a/arch/arm/mm/proc-arm6_7.S
+++ /dev/null
@@ -1,327 +0,0 @@
-/*
- *  linux/arch/arm/mm/proc-arm6,7.S
- *
- *  Copyright (C) 1997-2000 Russell King
- *  hacked for non-paged-MM by Hyok S. Choi, 2003.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  These are the low level assembler for performing cache and TLB
- *  functions on the ARM610 & ARM710.
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/assembler.h>
-#include <asm/asm-offsets.h>
-#include <asm/hwcap.h>
-#include <asm/pgtable-hwdef.h>
-#include <asm/pgtable.h>
-#include <asm/ptrace.h>
-
-#include "proc-macros.S"
-
-ENTRY(cpu_arm6_dcache_clean_area)
-ENTRY(cpu_arm7_dcache_clean_area)
-		mov	pc, lr
-
-/*
- * Function: arm6_7_data_abort ()
- *
- * Params  : r2 = pt_regs
- *	   : r4 = aborted context pc
- *	   : r5 = aborted context psr
- *
- * Purpose : obtain information about current aborted instruction
- *
- * Returns : r4-r5, r10-r11, r13 preserved
- */
-
-ENTRY(cpu_arm7_data_abort)
-	mrc	p15, 0, r1, c5, c0, 0		@ get FSR
-	mrc	p15, 0, r0, c6, c0, 0		@ get FAR
-	ldr	r8, [r4]			@ read arm instruction
-	tst	r8, #1 << 20			@ L = 0 -> write?
-	orreq	r1, r1, #1 << 11		@ yes.
-	and	r7, r8, #15 << 24
-	add	pc, pc, r7, lsr #22		@ Now branch to the relevant processing routine
-	nop
-
-/* 0 */	b	.data_unknown
-/* 1 */	b	do_DataAbort			@ swp
-/* 2 */	b	.data_unknown
-/* 3 */	b	.data_unknown
-/* 4 */	b	.data_arm_lateldrpostconst	@ ldr	rd, [rn], #m
-/* 5 */	b	.data_arm_lateldrpreconst	@ ldr	rd, [rn, #m]
-/* 6 */	b	.data_arm_lateldrpostreg	@ ldr	rd, [rn], rm
-/* 7 */	b	.data_arm_lateldrprereg		@ ldr	rd, [rn, rm]
-/* 8 */	b	.data_arm_ldmstm		@ ldm*a	rn, <rlist>
-/* 9 */	b	.data_arm_ldmstm		@ ldm*b	rn, <rlist>
-/* a */	b	.data_unknown
-/* b */	b	.data_unknown
-/* c */	b	do_DataAbort			@ ldc	rd, [rn], #m	@ Same as ldr	rd, [rn], #m
-/* d */	b	do_DataAbort			@ ldc	rd, [rn, #m]
-/* e */	b	.data_unknown
-/* f */
-.data_unknown:	@ Part of jumptable
-	mov	r0, r4
-	mov	r1, r8
-	b	baddataabort
-
-ENTRY(cpu_arm6_data_abort)
-	mrc	p15, 0, r1, c5, c0, 0		@ get FSR
-	mrc	p15, 0, r0, c6, c0, 0		@ get FAR
-	ldr	r8, [r4]			@ read arm instruction
-	tst	r8, #1 << 20			@ L = 0 -> write?
-	orreq	r1, r1, #1 << 11		@ yes.
-	and	r7, r8, #14 << 24
-	teq	r7, #8 << 24			@ was it ldm/stm
-	bne	do_DataAbort
-
-.data_arm_ldmstm:
-	tst	r8, #1 << 21			@ check writeback bit
-	beq	do_DataAbort			@ no writeback -> no fixup
-	mov	r7, #0x11
-	orr	r7, r7, #0x1100
-	and	r6, r8, r7
-	and	r9, r8, r7, lsl #1
-	add	r6, r6, r9, lsr #1
-	and	r9, r8, r7, lsl #2
-	add	r6, r6, r9, lsr #2
-	and	r9, r8, r7, lsl #3
-	add	r6, r6, r9, lsr #3
-	add	r6, r6, r6, lsr #8
-	add	r6, r6, r6, lsr #4
-	and	r6, r6, #15			@ r6 = no. of registers to transfer.
-	and	r9, r8, #15 << 16		@ Extract 'n' from instruction
-	ldr	r7, [r2, r9, lsr #14]		@ Get register 'Rn'
-	tst	r8, #1 << 23			@ Check U bit
-	subne	r7, r7, r6, lsl #2		@ Undo increment
-	addeq	r7, r7, r6, lsl #2		@ Undo decrement
-	str	r7, [r2, r9, lsr #14]		@ Put register 'Rn'
-	b	do_DataAbort
-
-.data_arm_apply_r6_and_rn:
-	and	r9, r8, #15 << 16		@ Extract 'n' from instruction
-	ldr	r7, [r2, r9, lsr #14]		@ Get register 'Rn'
-	tst	r8, #1 << 23			@ Check U bit
-	subne	r7, r7, r6			@ Undo incrmenet
-	addeq	r7, r7, r6			@ Undo decrement
-	str	r7, [r2, r9, lsr #14]		@ Put register 'Rn'
-	b	do_DataAbort
-
-.data_arm_lateldrpreconst:
-	tst	r8, #1 << 21			@ check writeback bit
-	beq	do_DataAbort			@ no writeback -> no fixup
-.data_arm_lateldrpostconst:
-	movs	r6, r8, lsl #20			@ Get offset
-	beq	do_DataAbort			@ zero -> no fixup
-	and	r9, r8, #15 << 16		@ Extract 'n' from instruction
-	ldr	r7, [r2, r9, lsr #14]		@ Get register 'Rn'
-	tst	r8, #1 << 23			@ Check U bit
-	subne	r7, r7, r6, lsr #20		@ Undo increment
-	addeq	r7, r7, r6, lsr #20		@ Undo decrement
-	str	r7, [r2, r9, lsr #14]		@ Put register 'Rn'
-	b	do_DataAbort
-
-.data_arm_lateldrprereg:
-	tst	r8, #1 << 21			@ check writeback bit
-	beq	do_DataAbort			@ no writeback -> no fixup
-.data_arm_lateldrpostreg:
-	and	r7, r8, #15			@ Extract 'm' from instruction
-	ldr	r6, [r2, r7, lsl #2]		@ Get register 'Rm'
-	mov	r9, r8, lsr #7			@ get shift count
-	ands	r9, r9, #31
-	and	r7, r8, #0x70			@ get shift type
-	orreq	r7, r7, #8			@ shift count = 0
-	add	pc, pc, r7
-	nop
-
-	mov	r6, r6, lsl r9			@ 0: LSL #!0
-	b	.data_arm_apply_r6_and_rn
-	b	.data_arm_apply_r6_and_rn	@ 1: LSL #0
-	nop
-	b	.data_unknown			@ 2: MUL?
-	nop
-	b	.data_unknown			@ 3: MUL?
-	nop
-	mov	r6, r6, lsr r9			@ 4: LSR #!0
-	b	.data_arm_apply_r6_and_rn
-	mov	r6, r6, lsr #32			@ 5: LSR #32
-	b	.data_arm_apply_r6_and_rn
-	b	.data_unknown			@ 6: MUL?
-	nop
-	b	.data_unknown			@ 7: MUL?
-	nop
-	mov	r6, r6, asr r9			@ 8: ASR #!0
-	b	.data_arm_apply_r6_and_rn
-	mov	r6, r6, asr #32			@ 9: ASR #32
-	b	.data_arm_apply_r6_and_rn
-	b	.data_unknown			@ A: MUL?
-	nop
-	b	.data_unknown			@ B: MUL?
-	nop
-	mov	r6, r6, ror r9			@ C: ROR #!0
-	b	.data_arm_apply_r6_and_rn
-	mov	r6, r6, rrx			@ D: RRX
-	b	.data_arm_apply_r6_and_rn
-	b	.data_unknown			@ E: MUL?
-	nop
-	b	.data_unknown			@ F: MUL?
-
-/*
- * Function: arm6_7_proc_init (void)
- *	   : arm6_7_proc_fin (void)
- *
- * Notes   : This processor does not require these
- */
-ENTRY(cpu_arm6_proc_init)
-ENTRY(cpu_arm7_proc_init)
-		mov	pc, lr
-
-ENTRY(cpu_arm6_proc_fin)
-ENTRY(cpu_arm7_proc_fin)
-		mov	r0, #0x31			@ ....S..DP...M
-		mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-		mov	pc, lr
-
-ENTRY(cpu_arm6_do_idle)
-ENTRY(cpu_arm7_do_idle)
-		mov	pc, lr
-
-/*
- * Function: arm6_7_switch_mm(unsigned long pgd_phys)
- * Params  : pgd_phys	Physical address of page table
- * Purpose : Perform a task switch, saving the old processes state, and restoring
- *	     the new.
- */
-ENTRY(cpu_arm6_switch_mm)
-ENTRY(cpu_arm7_switch_mm)
-#ifdef CONFIG_MMU
-		mov	r1, #0
-		mcr	p15, 0, r1, c7, c0, 0		@ flush cache
-		mcr	p15, 0, r0, c2, c0, 0		@ update page table ptr
-		mcr	p15, 0, r1, c5, c0, 0		@ flush TLBs
-#endif
-		mov	pc, lr
-
-/*
- * Function: arm6_7_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext)
- * Params  : r0 = Address to set
- *	   : r1 = value to set
- * Purpose : Set a PTE and flush it out of any WB cache
- */
-	.align	5
-ENTRY(cpu_arm6_set_pte_ext)
-ENTRY(cpu_arm7_set_pte_ext)
-#ifdef CONFIG_MMU
-	armv3_set_pte_ext wc_disable=0
-#endif /* CONFIG_MMU */
-	mov	pc, lr
-
-/*
- * Function: _arm6_7_reset
- * Params  : r0 = address to jump to
- * Notes   : This sets up everything for a reset
- */
-		.pushsection	.idmap.text, "ax"
-ENTRY(cpu_arm6_reset)
-ENTRY(cpu_arm7_reset)
-		mov	r1, #0
-		mcr	p15, 0, r1, c7, c0, 0		@ flush cache
-#ifdef CONFIG_MMU
-		mcr	p15, 0, r1, c5, c0, 0		@ flush TLB
-#endif
-		mov	r1, #0x30
-		mcr	p15, 0, r1, c1, c0, 0		@ turn off MMU etc
-		mov	pc, r0
-ENDPROC(cpu_arm6_reset)
-ENDPROC(cpu_arm7_reset)
-		.popsection
-
-		__CPUINIT
-
-		.type	__arm6_setup, #function
-__arm6_setup:	mov	r0, #0
-		mcr	p15, 0, r0, c7, c0		@ flush caches on v3
-#ifdef CONFIG_MMU
-		mcr	p15, 0, r0, c5, c0		@ flush TLBs on v3
-		mov	r0, #0x3d			@ . ..RS BLDP WCAM
-		orr	r0, r0, #0x100			@ . ..01 0011 1101
-#else
-		mov	r0, #0x3c			@ . ..RS BLDP WCA.
-#endif
-		mov	pc, lr
-		.size	__arm6_setup, . - __arm6_setup
-
-		.type	__arm7_setup, #function
-__arm7_setup:	mov	r0, #0
-		mcr	p15, 0, r0, c7, c0		@ flush caches on v3
-#ifdef CONFIG_MMU
-		mcr	p15, 0, r0, c5, c0		@ flush TLBs on v3
-		mcr	p15, 0, r0, c3, c0		@ load domain access register
-		mov	r0, #0x7d			@ . ..RS BLDP WCAM
-		orr	r0, r0, #0x100			@ . ..01 0111 1101
-#else
-		mov	r0, #0x7c			@ . ..RS BLDP WCA.
-#endif
-		mov	pc, lr
-		.size	__arm7_setup, . - __arm7_setup
-
-		__INITDATA
-
-		@ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
-		define_processor_functions arm6, dabort=cpu_arm6_data_abort, pabort=legacy_pabort
-		define_processor_functions arm7, dabort=cpu_arm7_data_abort, pabort=legacy_pabort
-
-		.section ".rodata"
-
-		string	cpu_arch_name, "armv3"
-		string	cpu_elf_name, "v3"
-		string	cpu_arm6_name, "ARM6"
-		string	cpu_arm610_name, "ARM610"
-		string	cpu_arm7_name, "ARM7"
-		string	cpu_arm710_name, "ARM710"
-
-		.align
-
-		.section ".proc.info.init", #alloc, #execinstr
-
-.macro arm67_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, \
-	cpu_mm_mmu_flags:req, cpu_flush:req, cpu_proc_funcs:req
-		.type	__\name\()_proc_info, #object
-__\name\()_proc_info:
-		.long	\cpu_val
-		.long	\cpu_mask
-		.long	\cpu_mm_mmu_flags
-		.long   PMD_TYPE_SECT | \
-			PMD_BIT4 | \
-			PMD_SECT_AP_WRITE | \
-			PMD_SECT_AP_READ
-		b	\cpu_flush
-		.long	cpu_arch_name
-		.long	cpu_elf_name
-		.long	HWCAP_SWP | HWCAP_26BIT
-		.long	\cpu_name
-		.long	\cpu_proc_funcs
-		.long	v3_tlb_fns
-		.long	v3_user_fns
-		.long	v3_cache_fns
-		.size	__\name\()_proc_info, . - __\name\()_proc_info
-.endm
-
-	arm67_proc_info	arm6,	0x41560600, 0xfffffff0, cpu_arm6_name, \
-		0x00000c1e, __arm6_setup, arm6_processor_functions
-	arm67_proc_info	arm610,	0x41560610, 0xfffffff0, cpu_arm610_name, \
-		0x00000c1e, __arm6_setup, arm6_processor_functions
-	arm67_proc_info	arm7,	0x41007000, 0xffffff00, cpu_arm7_name, \
-		0x00000c1e, __arm7_setup, arm7_processor_functions
-	arm67_proc_info	arm710,	0x41007100, 0xfff8ff00, cpu_arm710_name, \
-			PMD_TYPE_SECT | \
-			PMD_SECT_BUFFERABLE | \
-			PMD_SECT_CACHEABLE | \
-			PMD_BIT4 | \
-			PMD_SECT_AP_WRITE | \
-			PMD_SECT_AP_READ, \
-		__arm7_setup, arm7_processor_functions
diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S
index cb941ae95f66..1a8c138eb897 100644
--- a/arch/arm/mm/proc-arm920.S
+++ b/arch/arm/mm/proc-arm920.S
@@ -210,6 +210,7 @@ ENTRY(arm920_coherent_user_range)
 	cmp	r0, r1
 	blo	1b
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
+	mov	r0, #0
 	mov	pc, lr
 
 /*
diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S
index 4ec0e074dd55..4c44d7e1c3ca 100644
--- a/arch/arm/mm/proc-arm922.S
+++ b/arch/arm/mm/proc-arm922.S
@@ -212,6 +212,7 @@ ENTRY(arm922_coherent_user_range)
 	cmp	r0, r1
 	blo	1b
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
+	mov	r0, #0
 	mov	pc, lr
 
 /*
diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S
index 9dccd9a365b3..ec5b1180994f 100644
--- a/arch/arm/mm/proc-arm925.S
+++ b/arch/arm/mm/proc-arm925.S
@@ -258,6 +258,7 @@ ENTRY(arm925_coherent_user_range)
 	cmp	r0, r1
 	blo	1b
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
+	mov	r0, #0
 	mov	pc, lr
 
 /*
diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S
index 820259b81a1f..c31e62c606c0 100644
--- a/arch/arm/mm/proc-arm926.S
+++ b/arch/arm/mm/proc-arm926.S
@@ -221,6 +221,7 @@ ENTRY(arm926_coherent_user_range)
 	cmp	r0, r1
 	blo	1b
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
+	mov	r0, #0
 	mov	pc, lr
 
 /*
diff --git a/arch/arm/mm/proc-arm940.S b/arch/arm/mm/proc-arm940.S
index 9fdc0a170974..a613a7dd7146 100644
--- a/arch/arm/mm/proc-arm940.S
+++ b/arch/arm/mm/proc-arm940.S
@@ -160,7 +160,7 @@ ENTRY(arm940_coherent_user_range)
  *	- size	- region size
  */
 ENTRY(arm940_flush_kern_dcache_area)
-	mov	ip, #0
+	mov	r0, #0
 	mov	r1, #(CACHE_DSEGMENTS - 1) << 4	@ 4 segments
 1:	orr	r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
 2:	mcr	p15, 0, r3, c7, c14, 2		@ clean/flush D index
@@ -168,8 +168,8 @@ ENTRY(arm940_flush_kern_dcache_area)
 	bcs	2b				@ entries 63 to 0
 	subs	r1, r1, #1 << 4
 	bcs	1b				@ segments 7 to 0
-	mcr	p15, 0, ip, c7, c5, 0		@ invalidate I cache
-	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
+	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
+	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 	mov	pc, lr
 
 /*
diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S
index f684cfedcca9..9f4f2999fdd0 100644
--- a/arch/arm/mm/proc-arm946.S
+++ b/arch/arm/mm/proc-arm946.S
@@ -190,6 +190,7 @@ ENTRY(arm946_coherent_user_range)
 	cmp	r0, r1
 	blo	1b
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
+	mov	r0, #0
 	mov	pc, lr
 
 /*
diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S
index ba3c500584ac..23a8e4c7f2bd 100644
--- a/arch/arm/mm/proc-feroceon.S
+++ b/arch/arm/mm/proc-feroceon.S
@@ -232,6 +232,7 @@ ENTRY(feroceon_coherent_user_range)
 	cmp	r0, r1
 	blo	1b
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
+	mov	r0, #0
 	mov	pc, lr
 
 /*
diff --git a/arch/arm/mm/proc-mohawk.S b/arch/arm/mm/proc-mohawk.S
index cdfedc5b8ad8..fbb2124a547d 100644
--- a/arch/arm/mm/proc-mohawk.S
+++ b/arch/arm/mm/proc-mohawk.S
@@ -193,6 +193,7 @@ ENTRY(mohawk_coherent_user_range)
 	cmp	r0, r1
 	blo	1b
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
+	mov	r0, #0
 	mov	pc, lr
 
 /*
@@ -344,6 +345,41 @@ ENTRY(cpu_mohawk_set_pte_ext)
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 	mov	pc, lr
 
+.globl	cpu_mohawk_suspend_size
+.equ	cpu_mohawk_suspend_size, 4 * 6
+#ifdef CONFIG_PM_SLEEP
+ENTRY(cpu_mohawk_do_suspend)
+	stmfd	sp!, {r4 - r9, lr}
+	mrc	p14, 0, r4, c6, c0, 0	@ clock configuration, for turbo mode
+	mrc	p15, 0, r5, c15, c1, 0	@ CP access reg
+	mrc	p15, 0, r6, c13, c0, 0	@ PID
+	mrc 	p15, 0, r7, c3, c0, 0	@ domain ID
+	mrc	p15, 0, r8, c1, c0, 1	@ auxiliary control reg
+	mrc 	p15, 0, r9, c1, c0, 0	@ control reg
+	bic	r4, r4, #2		@ clear frequency change bit
+	stmia	r0, {r4 - r9}		@ store cp regs
+	ldmia	sp!, {r4 - r9, pc}
+ENDPROC(cpu_mohawk_do_suspend)
+
+ENTRY(cpu_mohawk_do_resume)
+	ldmia	r0, {r4 - r9}		@ load cp regs
+	mov	ip, #0
+	mcr	p15, 0, ip, c7, c7, 0	@ invalidate I & D caches, BTB
+	mcr	p15, 0, ip, c7, c10, 4	@ drain write (&fill) buffer
+	mcr	p15, 0, ip, c7, c5, 4	@ flush prefetch buffer
+	mcr	p15, 0, ip, c8, c7, 0	@ invalidate I & D TLBs
+	mcr	p14, 0, r4, c6, c0, 0	@ clock configuration, turbo mode.
+	mcr	p15, 0, r5, c15, c1, 0	@ CP access reg
+	mcr	p15, 0, r6, c13, c0, 0	@ PID
+	mcr	p15, 0, r7, c3, c0, 0	@ domain ID
+	orr	r1, r1, #0x18		@ cache the page table in L2
+	mcr	p15, 0, r1, c2, c0, 0	@ translation table base addr
+	mcr	p15, 0, r8, c1, c0, 1	@ auxiliary control reg
+	mov	r0, r9			@ control register
+	b	cpu_resume_mmu
+ENDPROC(cpu_mohawk_do_resume)
+#endif
+
 	__CPUINIT
 
 	.type	__mohawk_setup, #function
diff --git a/arch/arm/mm/proc-v7-2level.S b/arch/arm/mm/proc-v7-2level.S
index 3a4b3e7b888c..42ac069c8012 100644
--- a/arch/arm/mm/proc-v7-2level.S
+++ b/arch/arm/mm/proc-v7-2level.S
@@ -49,15 +49,10 @@ ENTRY(cpu_v7_switch_mm)
 #ifdef CONFIG_ARM_ERRATA_754322
 	dsb
 #endif
-	mcr	p15, 0, r2, c13, c0, 1		@ set reserved context ID
-	isb
-1:	mcr	p15, 0, r0, c2, c0, 0		@ set TTB 0
-	isb
-#ifdef CONFIG_ARM_ERRATA_754322
-	dsb
-#endif
 	mcr	p15, 0, r1, c13, c0, 1		@ set context ID
 	isb
+	mcr	p15, 0, r0, c2, c0, 0		@ set TTB 0
+	isb
 #endif
 	mov	pc, lr
 ENDPROC(cpu_v7_switch_mm)
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index f1c8486f7501..c2e2b66f72b5 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -255,6 +255,18 @@ __v7_setup:
 	mcr	p15, 0, r5, c10, c2, 0		@ write PRRR
 	mcr	p15, 0, r6, c10, c2, 1		@ write NMRR
 #endif
+#ifndef CONFIG_ARM_THUMBEE
+	mrc	p15, 0, r0, c0, c1, 0		@ read ID_PFR0 for ThumbEE
+	and	r0, r0, #(0xf << 12)		@ ThumbEE enabled field
+	teq	r0, #(1 << 12)			@ check if ThumbEE is present
+	bne	1f
+	mov	r5, #0
+	mcr	p14, 6, r5, c1, c0, 0		@ Initialize TEEHBR to 0
+	mrc	p14, 6, r0, c0, c0, 0		@ load TEECR
+	orr	r0, r0, #1			@ set the 1st bit in order to
+	mcr	p14, 6, r0, c0, c0, 0		@ stop userspace TEEHBR access
+1:
+#endif
 	adr	r5, v7_crval
 	ldmia	r5, {r5, r6}
 #ifdef CONFIG_CPU_ENDIAN_BE8
diff --git a/arch/arm/mm/tlb-v3.S b/arch/arm/mm/tlb-v3.S
deleted file mode 100644
index d253995ec4ca..000000000000
--- a/arch/arm/mm/tlb-v3.S
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- *  linux/arch/arm/mm/tlbv3.S
- *
- *  Copyright (C) 1997-2002 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  ARM architecture version 3 TLB handling functions.
- *
- * Processors: ARM610, ARM710.
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/asm-offsets.h>
-#include <asm/tlbflush.h>
-#include "proc-macros.S"
-
-	.align	5
-/*
- *	v3_flush_user_tlb_range(start, end, mm)
- *
- *	Invalidate a range of TLB entries in the specified address space.
- *
- *	- start - range start address
- *	- end   - range end address
- *	- mm    - mm_struct describing address space
- */
-	.align	5
-ENTRY(v3_flush_user_tlb_range)
-	vma_vm_mm r2, r2
-	act_mm	r3				@ get current->active_mm
-	teq	r2, r3				@ == mm ?
-	movne	pc, lr				@ no, we dont do anything
-ENTRY(v3_flush_kern_tlb_range)
-	bic	r0, r0, #0x0ff
-	bic	r0, r0, #0xf00
-1:	mcr	p15, 0, r0, c6, c0, 0		@ invalidate TLB entry
-	add	r0, r0, #PAGE_SZ
-	cmp	r0, r1
-	blo	1b
-	mov	pc, lr
-
-	__INITDATA
-
-	/* define struct cpu_tlb_fns (see <asm/tlbflush.h> and proc-macros.S) */
-	define_tlb_functions v3, v3_tlb_flags
diff --git a/arch/arm/mm/vmregion.h b/arch/arm/mm/vmregion.h
index 162be662c088..bf312c354a21 100644
--- a/arch/arm/mm/vmregion.h
+++ b/arch/arm/mm/vmregion.h
@@ -17,7 +17,7 @@ struct arm_vmregion {
 	struct list_head	vm_list;
 	unsigned long		vm_start;
 	unsigned long		vm_end;
-	struct page		*vm_pages;
+	void			*priv;
 	int			vm_active;
 	const void		*caller;
 };
diff --git a/arch/arm/nwfpe/fpmodule.c b/arch/arm/nwfpe/fpmodule.c
index cb7658e8acc5..4e729f055a81 100644
--- a/arch/arm/nwfpe/fpmodule.c
+++ b/arch/arm/nwfpe/fpmodule.c
@@ -147,7 +147,7 @@ void float_raise(signed char flags)
 #ifdef CONFIG_DEBUG_USER
 	if (flags & debug)
  		printk(KERN_DEBUG
-		       "NWFPE: %s[%d] takes exception %08x at %p from %08lx\n",
+		       "NWFPE: %s[%d] takes exception %08x at %pf from %08lx\n",
 		       current->comm, current->pid, flags,
 		       __builtin_return_address(0), GET_USERREG()->ARM_pc);
 #endif
diff --git a/arch/arm/plat-iop/pci.c b/arch/arm/plat-iop/pci.c
index 0da42058a20f..8daae9b230ea 100644
--- a/arch/arm/plat-iop/pci.c
+++ b/arch/arm/plat-iop/pci.c
@@ -160,7 +160,7 @@ iop3xx_write_config(struct pci_bus *bus, unsigned int devfn, int where,
 	return PCIBIOS_SUCCESSFUL;
 }
 
-static struct pci_ops iop3xx_ops = {
+struct pci_ops iop3xx_ops = {
 	.read	= iop3xx_read_config,
 	.write	= iop3xx_write_config,
 };
@@ -220,12 +220,6 @@ int iop3xx_pci_setup(int nr, struct pci_sys_data *sys)
 	return 1;
 }
 
-struct pci_bus *iop3xx_pci_scan_bus(int nr, struct pci_sys_data *sys)
-{
-	return pci_scan_root_bus(NULL, sys->busnr, &iop3xx_ops, sys,
-				 &sys->resources);
-}
-
 void __init iop3xx_atu_setup(void)
 {
 	/* BAR 0 ( Disabled ) */
diff --git a/arch/arm/plat-mxc/3ds_debugboard.c b/arch/arm/plat-mxc/3ds_debugboard.c
index d1e31fa1b0c3..5cac2c540f4f 100644
--- a/arch/arm/plat-mxc/3ds_debugboard.c
+++ b/arch/arm/plat-mxc/3ds_debugboard.c
@@ -80,7 +80,7 @@ static struct smsc911x_platform_config smsc911x_config = {
 
 static struct platform_device smsc_lan9217_device = {
 	.name = "smsc911x",
-	.id = 0,
+	.id = -1,
 	.dev = {
 		.platform_data = &smsc911x_config,
 	},
diff --git a/arch/arm/plat-mxc/clock.c b/arch/arm/plat-mxc/clock.c
index 2ed3ab173add..5079787273d2 100644
--- a/arch/arm/plat-mxc/clock.c
+++ b/arch/arm/plat-mxc/clock.c
@@ -41,6 +41,7 @@
 #include <mach/clock.h>
 #include <mach/hardware.h>
 
+#ifndef CONFIG_COMMON_CLK
 static LIST_HEAD(clocks);
 static DEFINE_MUTEX(clocks_mutex);
 
@@ -200,6 +201,16 @@ struct clk *clk_get_parent(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_get_parent);
 
+#else
+
+/*
+ * Lock to protect the clock module (ccm) registers. Used
+ * on all i.MXs
+ */
+DEFINE_SPINLOCK(imx_ccm_lock);
+
+#endif /* CONFIG_COMMON_CLK */
+
 /*
  * Get the resulting clock rate from a PLL register value and the input
  * frequency. PLLs with this register layout can at least be found on
diff --git a/arch/arm/plat-mxc/include/mach/clock.h b/arch/arm/plat-mxc/include/mach/clock.h
index 753a5988d85c..bd940c795cbb 100644
--- a/arch/arm/plat-mxc/include/mach/clock.h
+++ b/arch/arm/plat-mxc/include/mach/clock.h
@@ -23,6 +23,7 @@
 #ifndef __ASSEMBLY__
 #include <linux/list.h>
 
+#ifndef CONFIG_COMMON_CLK
 struct module;
 
 struct clk {
@@ -59,6 +60,9 @@ struct clk {
 
 int clk_register(struct clk *clk);
 void clk_unregister(struct clk *clk);
+#endif /* CONFIG_COMMON_CLK */
+
+extern spinlock_t imx_ccm_lock;
 
 unsigned long mxc_decode_pll(unsigned int pll, u32 f_ref);
 
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 0319c4a0cafa..cf663d84e7c1 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -53,6 +53,7 @@ extern void imx35_soc_init(void);
 extern void imx50_soc_init(void);
 extern void imx51_soc_init(void);
 extern void imx53_soc_init(void);
+extern void imx51_init_late(void);
 extern void epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq);
 extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int);
 extern int mx1_clocks_init(unsigned long fref);
@@ -149,4 +150,10 @@ extern void imx6q_pm_init(void);
 static inline void imx6q_pm_init(void) {}
 #endif
 
+#ifdef CONFIG_NEON
+extern int mx51_neon_fixup(void);
+#else
+static inline int mx51_neon_fixup(void) { return 0; }
+#endif
+
 #endif
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index 8ddda365f1a0..761e45f9456f 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -24,6 +24,8 @@
 #define UART_PADDR	MX51_UART1_BASE_ADDR
 #elif defined (CONFIG_DEBUG_IMX50_IMX53_UART)
 #define UART_PADDR	MX53_UART1_BASE_ADDR
+#elif defined (CONFIG_DEBUG_IMX6Q_UART2)
+#define UART_PADDR	MX6Q_UART2_BASE_ADDR
 #elif defined (CONFIG_DEBUG_IMX6Q_UART4)
 #define UART_PADDR	MX6Q_UART4_BASE_ADDR
 #endif
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx51.h b/arch/arm/plat-mxc/include/mach/iomux-mx51.h
index c7f5169a6a54..36c8989d9de6 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx51.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx51.h
@@ -256,13 +256,13 @@
 #define MX51_PAD_NANDF_RB1__GPIO3_9		IOMUX_PAD(0x4fc, 0x120, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
 #define MX51_PAD_NANDF_RB1__NANDF_RB1		IOMUX_PAD(0x4fc, 0x120, 0, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_NANDF_RB1__PATA_IORDY		IOMUX_PAD(0x4fc, 0x120, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB1__SD4_CMD		IOMUX_PAD(0x4fc, 0x120, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_NANDF_RB1__SD4_CMD		IOMUX_PAD(0x4fc, 0x120, 0x15, __NA_, 0, MX51_SDHCI_PAD_CTRL)
 #define MX51_PAD_NANDF_RB2__DISP2_WAIT		IOMUX_PAD(0x500, 0x124, 5, 0x9a8, 0, NO_PAD_CTRL)
 #define MX51_PAD_NANDF_RB2__ECSPI2_SCLK		IOMUX_PAD(0x500, 0x124, 2, __NA_, 0, MX51_ECSPI_PAD_CTRL)
 #define MX51_PAD_NANDF_RB2__FEC_COL		IOMUX_PAD(0x500, 0x124, 1, 0x94c, 0, MX51_PAD_CTRL_2)
 #define MX51_PAD_NANDF_RB2__GPIO3_10		IOMUX_PAD(0x500, 0x124, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
 #define MX51_PAD_NANDF_RB2__NANDF_RB2		IOMUX_PAD(0x500, 0x124, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB2__USBH3_H3_DP		IOMUX_PAD(0x500, 0x124, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_RB2__USBH3_H3_DP		IOMUX_PAD(0x500, 0x124, 0x17, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_NANDF_RB2__USBH3_NXT		IOMUX_PAD(0x500, 0x124, 6, 0xa20, 0, NO_PAD_CTRL)
 #define MX51_PAD_NANDF_RB3__DISP1_WAIT		IOMUX_PAD(0x504, 0x128, 5, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_NANDF_RB3__ECSPI2_MISO		IOMUX_PAD(0x504, 0x128, 2, __NA_, 0, MX51_ECSPI_PAD_CTRL)
@@ -270,7 +270,7 @@
 #define MX51_PAD_NANDF_RB3__GPIO3_11		IOMUX_PAD(0x504, 0x128, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
 #define MX51_PAD_NANDF_RB3__NANDF_RB3		IOMUX_PAD(0x504, 0x128, 0, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_NANDF_RB3__USBH3_CLK		IOMUX_PAD(0x504, 0x128, 6, 0x9f8, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB3__USBH3_H3_DM		IOMUX_PAD(0x504, 0x128, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_RB3__USBH3_H3_DM		IOMUX_PAD(0x504, 0x128, 0x17, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_GPIO_NAND__GPIO_NAND		IOMUX_PAD(0x514, 0x12c, 0, 0x998, 0, MX51_GPIO_PAD_CTRL)
 #define MX51_PAD_GPIO_NAND__PATA_INTRQ		IOMUX_PAD(0x514, 0x12c, 1, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_NANDF_CS0__GPIO3_16		IOMUX_PAD(0x518, 0x130, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
@@ -283,13 +283,13 @@
 #define MX51_PAD_NANDF_CS2__NANDF_CS2		IOMUX_PAD(0x520, 0x138, 0, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_NANDF_CS2__PATA_CS_0		IOMUX_PAD(0x520, 0x138, 1, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_NANDF_CS2__SD4_CLK		IOMUX_PAD(0x520, 0x138, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS)
-#define MX51_PAD_NANDF_CS2__USBH3_H1_DP		IOMUX_PAD(0x520, 0x138, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS2__USBH3_H1_DP		IOMUX_PAD(0x520, 0x138, 0x17, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_NANDF_CS3__FEC_MDC		IOMUX_PAD(0x524, 0x13c, 2, __NA_, 0, MX51_PAD_CTRL_5)
 #define MX51_PAD_NANDF_CS3__GPIO3_19		IOMUX_PAD(0x524, 0x13c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
 #define MX51_PAD_NANDF_CS3__NANDF_CS3		IOMUX_PAD(0x524, 0x13c, 0, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_NANDF_CS3__PATA_CS_1		IOMUX_PAD(0x524, 0x13c, 1, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_NANDF_CS3__SD4_DAT0		IOMUX_PAD(0x524, 0x13c, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_NANDF_CS3__USBH3_H1_DM		IOMUX_PAD(0x524, 0x13c, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS3__USBH3_H1_DM		IOMUX_PAD(0x524, 0x13c, 0x17, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_NANDF_CS4__FEC_TDATA1		IOMUX_PAD(0x528, 0x140, 2, __NA_, 0, MX51_PAD_CTRL_5)
 #define MX51_PAD_NANDF_CS4__GPIO3_20		IOMUX_PAD(0x528, 0x140, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
 #define MX51_PAD_NANDF_CS4__NANDF_CS4		IOMUX_PAD(0x528, 0x140, 0, __NA_, 0, NO_PAD_CTRL)
@@ -316,7 +316,7 @@
 #define MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK	IOMUX_PAD(0x538, 0x150, 1, 0x974, 0, MX51_PAD_CTRL_4)
 #define MX51_PAD_NANDF_RDY_INT__GPIO3_24	IOMUX_PAD(0x538, 0x150, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
 #define MX51_PAD_NANDF_RDY_INT__NANDF_RDY_INT	IOMUX_PAD(0x538, 0x150, 0, 0x938, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RDY_INT__SD3_CMD		IOMUX_PAD(0x538, 0x150, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_NANDF_RDY_INT__SD3_CMD		IOMUX_PAD(0x538, 0x150, 0x15, __NA_, 0, MX51_SDHCI_PAD_CTRL)
 #define MX51_PAD_NANDF_D15__ECSPI2_MOSI		IOMUX_PAD(0x53c, 0x154, 2, __NA_, 0, MX51_ECSPI_PAD_CTRL)
 #define MX51_PAD_NANDF_D15__GPIO3_25		IOMUX_PAD(0x53c, 0x154, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
 #define MX51_PAD_NANDF_D15__NANDF_D15		IOMUX_PAD(0x53c, 0x154, 0, __NA_, 0, NO_PAD_CTRL)
@@ -672,23 +672,23 @@
 #define MX51_PAD_DISP2_DAT5__DISP2_DAT5		IOMUX_PAD(0x770, 0x368, 0, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_DISP2_DAT6__DISP2_DAT6		IOMUX_PAD(0x774, 0x36c, 0, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_DISP2_DAT6__FEC_TDATA1		IOMUX_PAD(0x774, 0x36c, 2, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_DISP2_DAT6__GPIO1_19		IOMUX_PAD(0x774, 0x36c, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT6__GPIO1_19		IOMUX_PAD(0x774, 0x36c, 5, __NA_, 0, MX51_GPIO_PAD_CTRL)
 #define MX51_PAD_DISP2_DAT6__KEY_ROW4		IOMUX_PAD(0x774, 0x36c, 4, 0x9d0, 1, NO_PAD_CTRL)
 #define MX51_PAD_DISP2_DAT6__USBH3_STP		IOMUX_PAD(0x774, 0x36c, 3, 0xa24, 1, NO_PAD_CTRL)
 #define MX51_PAD_DISP2_DAT7__DISP2_DAT7		IOMUX_PAD(0x778, 0x370, 0, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_DISP2_DAT7__FEC_TDATA2		IOMUX_PAD(0x778, 0x370, 2, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_DISP2_DAT7__GPIO1_29		IOMUX_PAD(0x778, 0x370, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT7__GPIO1_29		IOMUX_PAD(0x778, 0x370, 5, __NA_, 0, MX51_GPIO_PAD_CTRL)
 #define MX51_PAD_DISP2_DAT7__KEY_ROW5		IOMUX_PAD(0x778, 0x370, 4, 0x9d4, 1, NO_PAD_CTRL)
 #define MX51_PAD_DISP2_DAT7__USBH3_NXT		IOMUX_PAD(0x778, 0x370, 3, 0xa20, 1, NO_PAD_CTRL)
 #define MX51_PAD_DISP2_DAT8__DISP2_DAT8		IOMUX_PAD(0x77c, 0x374, 0, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_DISP2_DAT8__FEC_TDATA3		IOMUX_PAD(0x77c, 0x374, 2, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_DISP2_DAT8__GPIO1_30		IOMUX_PAD(0x77c, 0x374, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT8__GPIO1_30		IOMUX_PAD(0x77c, 0x374, 5, __NA_, 0, MX51_GPIO_PAD_CTRL)
 #define MX51_PAD_DISP2_DAT8__KEY_ROW6		IOMUX_PAD(0x77c, 0x374, 4, 0x9d8, 1, NO_PAD_CTRL)
 #define MX51_PAD_DISP2_DAT8__USBH3_DATA0	IOMUX_PAD(0x77c, 0x374, 3, 0x9fc, 1, NO_PAD_CTRL)
 #define MX51_PAD_DISP2_DAT9__AUD6_RXC		IOMUX_PAD(0x780, 0x378, 4, 0x8f4, 1, NO_PAD_CTRL)
 #define MX51_PAD_DISP2_DAT9__DISP2_DAT9		IOMUX_PAD(0x780, 0x378, 0, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_DISP2_DAT9__FEC_TX_EN		IOMUX_PAD(0x780, 0x378, 2, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_DISP2_DAT9__GPIO1_31		IOMUX_PAD(0x780, 0x378, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT9__GPIO1_31		IOMUX_PAD(0x780, 0x378, 5, __NA_, 0, MX51_GPIO_PAD_CTRL)
 #define MX51_PAD_DISP2_DAT9__USBH3_DATA1	IOMUX_PAD(0x780, 0x378, 3, 0xa00, 1, NO_PAD_CTRL)
 #define MX51_PAD_DISP2_DAT10__DISP2_DAT10	IOMUX_PAD(0x784, 0x37c, 0, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_DISP2_DAT10__DISP2_SER_CS	IOMUX_PAD(0x784, 0x37c, 5, __NA_, 0, NO_PAD_CTRL)
@@ -698,7 +698,7 @@
 #define MX51_PAD_DISP2_DAT11__AUD6_TXD		IOMUX_PAD(0x788, 0x380, 4, 0x8f0, 1, NO_PAD_CTRL)
 #define MX51_PAD_DISP2_DAT11__DISP2_DAT11	IOMUX_PAD(0x788, 0x380, 0, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_DISP2_DAT11__FEC_RX_CLK	IOMUX_PAD(0x788, 0x380, 2, 0x968, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT11__GPIO1_10		IOMUX_PAD(0x788, 0x380, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT11__GPIO1_10		IOMUX_PAD(0x788, 0x380, 7, __NA_, 0, MX51_GPIO_PAD_CTRL)
 #define MX51_PAD_DISP2_DAT11__USBH3_DATA3	IOMUX_PAD(0x788, 0x380, 3, 0xa08, 1, NO_PAD_CTRL)
 #define MX51_PAD_DISP2_DAT12__AUD6_RXD		IOMUX_PAD(0x78c, 0x384, 4, 0x8ec, 1, NO_PAD_CTRL)
 #define MX51_PAD_DISP2_DAT12__DISP2_DAT12	IOMUX_PAD(0x78c, 0x384, 0, __NA_, 0, NO_PAD_CTRL)
@@ -746,16 +746,16 @@
 #define MX51_PAD_SD1_DATA3__CSPI_SS1		IOMUX_PAD(0x7b0, 0x3a8, 2, 0x920, 1, MX51_ECSPI_PAD_CTRL)
 #define MX51_PAD_SD1_DATA3__SD1_DATA3		IOMUX_PAD(0x7b0, 0x3a8, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
 #define MX51_PAD_GPIO1_0__CSPI_SS2		IOMUX_PAD(0x7b4, 0x3ac, 2, 0x924, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_GPIO1_0__GPIO1_0		IOMUX_PAD(0x7b4, 0x3ac, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_0__GPIO1_0		IOMUX_PAD(0x7b4, 0x3ac, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
 #define MX51_PAD_GPIO1_0__SD1_CD		IOMUX_PAD(0x7b4, 0x3ac, 0, __NA_, 0, MX51_ESDHC_PAD_CTRL)
 #define MX51_PAD_GPIO1_1__CSPI_MISO		IOMUX_PAD(0x7b8, 0x3b0, 2, 0x918, 2, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_GPIO1_1__GPIO1_1		IOMUX_PAD(0x7b8, 0x3b0, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_1__GPIO1_1		IOMUX_PAD(0x7b8, 0x3b0, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
 #define MX51_PAD_GPIO1_1__SD1_WP		IOMUX_PAD(0x7b8, 0x3b0, 0, __NA_, 0, MX51_ESDHC_PAD_CTRL)
 #define MX51_PAD_EIM_DA12__EIM_DA12		IOMUX_PAD(__NA_, 0x04c, 0, 0x000, 0, NO_PAD_CTRL)
 #define MX51_PAD_EIM_DA13__EIM_DA13		IOMUX_PAD(__NA_, 0x050, 0, 0x000, 0, NO_PAD_CTRL)
 #define MX51_PAD_EIM_DA14__EIM_DA14		IOMUX_PAD(__NA_, 0x054, 0, 0x000, 0, NO_PAD_CTRL)
 #define MX51_PAD_EIM_DA15__EIM_DA15		IOMUX_PAD(__NA_, 0x058, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD2_CMD__CSPI_MOSI		IOMUX_PAD(__NA_, 0x3b4, 2, 0x91c, 3, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_SD2_CMD__CSPI_MOSI		IOMUX_PAD(0x7bc, 0x3b4, 2, 0x91c, 3, MX51_ECSPI_PAD_CTRL)
 #define MX51_PAD_SD2_CMD__I2C1_SCL		IOMUX_PAD(0x7bc, 0x3b4, 0x11, 0x9b0, 2, MX51_I2C_PAD_CTRL)
 #define MX51_PAD_SD2_CMD__SD2_CMD		IOMUX_PAD(0x7bc, 0x3b4, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
 #define MX51_PAD_SD2_CLK__CSPI_SCLK		IOMUX_PAD(0x7c0, 0x3b8, 2, 0x914, 3, MX51_ECSPI_PAD_CTRL)
@@ -766,19 +766,19 @@
 #define MX51_PAD_SD2_DATA0__SD2_DATA0		IOMUX_PAD(0x7c4, 0x3bc, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
 #define MX51_PAD_SD2_DATA1__SD1_DAT5		IOMUX_PAD(0x7c8, 0x3c0, 1, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_SD2_DATA1__SD2_DATA1		IOMUX_PAD(0x7c8, 0x3c0, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_SD2_DATA1__USBH3_H2_DP		IOMUX_PAD(0x7c8, 0x3c0, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_DATA1__USBH3_H2_DP		IOMUX_PAD(0x7c8, 0x3c0, 0x12, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_SD2_DATA2__SD1_DAT6		IOMUX_PAD(0x7cc, 0x3c4, 1, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_SD2_DATA2__SD2_DATA2		IOMUX_PAD(0x7cc, 0x3c4, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_SD2_DATA2__USBH3_H2_DM		IOMUX_PAD(0x7cc, 0x3c4, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_DATA2__USBH3_H2_DM		IOMUX_PAD(0x7cc, 0x3c4, 0x12, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_SD2_DATA3__CSPI_SS2		IOMUX_PAD(0x7d0, 0x3c8, 2, 0x924, 1, MX51_ECSPI_PAD_CTRL)
 #define MX51_PAD_SD2_DATA3__SD1_DAT7		IOMUX_PAD(0x7d0, 0x3c8, 1, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_SD2_DATA3__SD2_DATA3		IOMUX_PAD(0x7d0, 0x3c8, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
 #define MX51_PAD_GPIO1_2__CCM_OUT_2		IOMUX_PAD(0x7d4, 0x3cc, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_2__GPIO1_2		IOMUX_PAD(0x7d4, 0x3cc, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_2__GPIO1_2		IOMUX_PAD(0x7d4, 0x3cc, 0, __NA_, 0, MX51_GPIO_PAD_CTRL)
 #define MX51_PAD_GPIO1_2__I2C2_SCL		IOMUX_PAD(0x7d4, 0x3cc, 0x12, 0x9b8, 3, MX51_I2C_PAD_CTRL)
 #define MX51_PAD_GPIO1_2__PLL1_BYP		IOMUX_PAD(0x7d4, 0x3cc, 7, 0x90c, 1, NO_PAD_CTRL)
 #define MX51_PAD_GPIO1_2__PWM1_PWMO		IOMUX_PAD(0x7d4, 0x3cc, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_3__GPIO1_3		IOMUX_PAD(0x7d8, 0x3d0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_3__GPIO1_3		IOMUX_PAD(0x7d8, 0x3d0, 0, __NA_, 0, MX51_GPIO_PAD_CTRL)
 #define MX51_PAD_GPIO1_3__I2C2_SDA		IOMUX_PAD(0x7d8, 0x3d0, 0x12, 0x9bc, 3, MX51_I2C_PAD_CTRL)
 #define MX51_PAD_GPIO1_3__PLL2_BYP		IOMUX_PAD(0x7d8, 0x3d0, 7, 0x910, 1, NO_PAD_CTRL)
 #define MX51_PAD_GPIO1_3__PWM2_PWMO		IOMUX_PAD(0x7d8, 0x3d0, 1, __NA_, 0, NO_PAD_CTRL)
@@ -786,27 +786,27 @@
 #define MX51_PAD_PMIC_INT_REQ__PMIC_PMU_IRQ_B	IOMUX_PAD(0x7fc, 0x3d4, 1, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_GPIO1_4__DISP2_EXT_CLK		IOMUX_PAD(0x804, 0x3d8, 4, 0x908, 1, NO_PAD_CTRL)
 #define MX51_PAD_GPIO1_4__EIM_RDY		IOMUX_PAD(0x804, 0x3d8, 3, 0x938, 1, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_4__GPIO1_4		IOMUX_PAD(0x804, 0x3d8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_4__GPIO1_4		IOMUX_PAD(0x804, 0x3d8, 0, __NA_, 0, MX51_GPIO_PAD_CTRL)
 #define MX51_PAD_GPIO1_4__WDOG1_WDOG_B		IOMUX_PAD(0x804, 0x3d8, 2, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_GPIO1_5__CSI2_MCLK		IOMUX_PAD(0x808, 0x3dc, 6, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_GPIO1_5__DISP2_PIN16		IOMUX_PAD(0x808, 0x3dc, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_5__GPIO1_5		IOMUX_PAD(0x808, 0x3dc, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_5__GPIO1_5		IOMUX_PAD(0x808, 0x3dc, 0, __NA_, 0, MX51_GPIO_PAD_CTRL)
 #define MX51_PAD_GPIO1_5__WDOG2_WDOG_B		IOMUX_PAD(0x808, 0x3dc, 2, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_GPIO1_6__DISP2_PIN17		IOMUX_PAD(0x80c, 0x3e0, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_6__GPIO1_6		IOMUX_PAD(0x80c, 0x3e0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_6__GPIO1_6		IOMUX_PAD(0x80c, 0x3e0, 0, __NA_, 0, MX51_GPIO_PAD_CTRL)
 #define MX51_PAD_GPIO1_6__REF_EN_B		IOMUX_PAD(0x80c, 0x3e0, 3, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_GPIO1_7__CCM_OUT_0		IOMUX_PAD(0x810, 0x3e4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_7__GPIO1_7		IOMUX_PAD(0x810, 0x3e4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_7__GPIO1_7		IOMUX_PAD(0x810, 0x3e4, 0, __NA_, 0, MX51_GPIO_PAD_CTRL)
 #define MX51_PAD_GPIO1_7__SD2_WP		IOMUX_PAD(0x810, 0x3e4, 6, __NA_, 0, MX51_ESDHC_PAD_CTRL)
 #define MX51_PAD_GPIO1_7__SPDIF_OUT1		IOMUX_PAD(0x810, 0x3e4, 2, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_GPIO1_8__CSI2_DATA_EN		IOMUX_PAD(0x814, 0x3e8, 2, 0x99c, 2, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_8__GPIO1_8		IOMUX_PAD(0x814, 0x3e8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_8__GPIO1_8		IOMUX_PAD(0x814, 0x3e8, 0, __NA_, 0, MX51_GPIO_PAD_CTRL)
 #define MX51_PAD_GPIO1_8__SD2_CD		IOMUX_PAD(0x814, 0x3e8, 6, __NA_, 0, MX51_ESDHC_PAD_CTRL)
 #define MX51_PAD_GPIO1_8__USBH3_PWR		IOMUX_PAD(0x814, 0x3e8, 1, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_GPIO1_9__CCM_OUT_1		IOMUX_PAD(0x818, 0x3ec, 3, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_GPIO1_9__DISP2_D1_CS		IOMUX_PAD(0x818, 0x3ec, 2, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_GPIO1_9__DISP2_SER_CS		IOMUX_PAD(0x818, 0x3ec, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_9__GPIO1_9		IOMUX_PAD(0x818, 0x3ec, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_9__GPIO1_9		IOMUX_PAD(0x818, 0x3ec, 0, __NA_, 0, MX51_GPIO_PAD_CTRL)
 #define MX51_PAD_GPIO1_9__SD2_LCTL		IOMUX_PAD(0x818, 0x3ec, 6, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_GPIO1_9__USBH3_OC		IOMUX_PAD(0x818, 0x3ec, 1, __NA_, 0, NO_PAD_CTRL)
 
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx53.h b/arch/arm/plat-mxc/include/mach/iomux-mx53.h
index 527f8fe3e31b..9761e003bde2 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx53.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx53.h
@@ -573,7 +573,7 @@
 #define MX53_PAD_EIM_D28__UART2_CTS			IOMUX_PAD(0x494, 0x14C, 2, __NA_, 0, MX53_UART_PAD_CTRL)
 #define MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO		IOMUX_PAD(0x494, 0x14C, 3, 0x82C, 1, NO_PAD_CTRL)
 #define MX53_PAD_EIM_D28__CSPI_MOSI			IOMUX_PAD(0x494, 0x14C, 4, 0x788, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D28__I2C1_SDA			IOMUX_PAD(0x494, 0x14C, 5 | IOMUX_CONFIG_SION, 0x818, 1, PAD_CTRL_I2C)
+#define MX53_PAD_EIM_D28__I2C1_SDA			IOMUX_PAD(0x494, 0x14C, 5 | IOMUX_CONFIG_SION, 0x818, 1, NO_PAD_CTRL)
 #define MX53_PAD_EIM_D28__IPU_EXT_TRIG			IOMUX_PAD(0x494, 0x14C, 6, __NA_, 0, NO_PAD_CTRL)
 #define MX53_PAD_EIM_D28__IPU_DI0_PIN13			IOMUX_PAD(0x494, 0x14C, 7, __NA_, 0, NO_PAD_CTRL)
 #define MX53_PAD_EIM_D29__EMI_WEIM_D_29			IOMUX_PAD(0x498, 0x150, 0, __NA_, 0, NO_PAD_CTRL)
@@ -1187,7 +1187,7 @@
 #define MX53_PAD_GPIO_8__ESAI1_TX5_RX0			IOMUX_PAD(0x6C8, 0x338, 0, 0x7F8, 1, NO_PAD_CTRL)
 #define MX53_PAD_GPIO_8__GPIO1_8			IOMUX_PAD(0x6C8, 0x338, 1, __NA_, 0, NO_PAD_CTRL)
 #define MX53_PAD_GPIO_8__EPIT2_EPITO			IOMUX_PAD(0x6C8, 0x338, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_8__CAN1_RXCAN			IOMUX_PAD(0x6C8, 0x338, 3, 0x760, 3, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_8__CAN1_RXCAN			IOMUX_PAD(0x6C8, 0x338, 3, 0x760, 2, NO_PAD_CTRL)
 #define MX53_PAD_GPIO_8__UART2_RXD_MUX			IOMUX_PAD(0x6C8, 0x338, 4, 0x880, 5, MX53_UART_PAD_CTRL)
 #define MX53_PAD_GPIO_8__FIRI_TXD			IOMUX_PAD(0x6C8, 0x338, 5, __NA_, 0, NO_PAD_CTRL)
 #define MX53_PAD_GPIO_8__SPDIF_SRCLK			IOMUX_PAD(0x6C8, 0x338, 6, __NA_, 0, NO_PAD_CTRL)
diff --git a/arch/arm/plat-mxc/include/mach/mx2_cam.h b/arch/arm/plat-mxc/include/mach/mx2_cam.h
index 3c080a32dbf5..7ded6f1f74bc 100644
--- a/arch/arm/plat-mxc/include/mach/mx2_cam.h
+++ b/arch/arm/plat-mxc/include/mach/mx2_cam.h
@@ -23,7 +23,6 @@
 #ifndef __MACH_MX2_CAM_H_
 #define __MACH_MX2_CAM_H_
 
-#define MX2_CAMERA_SWAP16		(1 << 0)
 #define MX2_CAMERA_EXT_VSYNC		(1 << 1)
 #define MX2_CAMERA_CCIR			(1 << 2)
 #define MX2_CAMERA_CCIR_INTERLACE	(1 << 3)
@@ -31,7 +30,6 @@
 #define MX2_CAMERA_GATED_CLOCK		(1 << 5)
 #define MX2_CAMERA_INV_DATA		(1 << 6)
 #define MX2_CAMERA_PCLK_SAMPLE_RISING	(1 << 7)
-#define MX2_CAMERA_PACK_DIR_MSB		(1 << 8)
 
 /**
  * struct mx2_camera_platform_data - optional platform data for mx2_camera
diff --git a/arch/arm/plat-mxc/include/mach/mx6q.h b/arch/arm/plat-mxc/include/mach/mx6q.h
index 254a561a2799..f7e7dbac8f4b 100644
--- a/arch/arm/plat-mxc/include/mach/mx6q.h
+++ b/arch/arm/plat-mxc/include/mach/mx6q.h
@@ -27,6 +27,8 @@
 #define MX6Q_CCM_SIZE			0x4000
 #define MX6Q_ANATOP_BASE_ADDR		0x020c8000
 #define MX6Q_ANATOP_SIZE		0x1000
+#define MX6Q_UART2_BASE_ADDR		0x021e8000
+#define MX6Q_UART2_SIZE			0x4000
 #define MX6Q_UART4_BASE_ADDR		0x021f0000
 #define MX6Q_UART4_SIZE			0x4000
 
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index 7daf7c9a413b..99f958ca6cb8 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -25,6 +25,7 @@
 #include <linux/irq.h>
 #include <linux/clockchips.h>
 #include <linux/clk.h>
+#include <linux/err.h>
 
 #include <mach/hardware.h>
 #include <asm/sched_clock.h>
@@ -282,6 +283,19 @@ static int __init mxc_clockevent_init(struct clk *timer_clk)
 void __init mxc_timer_init(struct clk *timer_clk, void __iomem *base, int irq)
 {
 	uint32_t tctl_val;
+	struct clk *timer_ipg_clk;
+
+	if (!timer_clk) {
+		timer_clk = clk_get_sys("imx-gpt.0", "per");
+		if (IS_ERR(timer_clk)) {
+			pr_err("i.MX timer: unable to get clk\n");
+			return;
+		}
+
+		timer_ipg_clk = clk_get_sys("imx-gpt.0", "ipg");
+		if (!IS_ERR(timer_ipg_clk))
+			clk_prepare_enable(timer_ipg_clk);
+	}
 
 	clk_prepare_enable(timer_clk);
 
diff --git a/arch/arm/plat-nomadik/include/plat/gpio-nomadik.h b/arch/arm/plat-nomadik/include/plat/gpio-nomadik.h
index 9605bf227df9..826de74bfdd1 100644
--- a/arch/arm/plat-nomadik/include/plat/gpio-nomadik.h
+++ b/arch/arm/plat-nomadik/include/plat/gpio-nomadik.h
@@ -29,6 +29,7 @@
 #define NMK_GPIO_SLPC	0x1c
 #define NMK_GPIO_AFSLA	0x20
 #define NMK_GPIO_AFSLB	0x24
+#define NMK_GPIO_LOWEMI	0x28
 
 #define NMK_GPIO_RIMSC	0x40
 #define NMK_GPIO_FIMSC	0x44
@@ -61,7 +62,14 @@ enum nmk_gpio_slpm {
 
 extern int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode);
 extern int nmk_gpio_set_pull(int gpio, enum nmk_gpio_pull pull);
+#ifdef CONFIG_PINCTRL_NOMADIK
 extern int nmk_gpio_set_mode(int gpio, int gpio_mode);
+#else
+static inline int nmk_gpio_set_mode(int gpio, int gpio_mode)
+{
+	return -ENODEV;
+}
+#endif
 extern int nmk_gpio_get_mode(int gpio);
 
 extern void nmk_gpio_wakeups_suspend(void);
diff --git a/arch/arm/plat-nomadik/include/plat/pincfg.h b/arch/arm/plat-nomadik/include/plat/pincfg.h
index 22cb97d2d8ad..9c949c7c98a7 100644
--- a/arch/arm/plat-nomadik/include/plat/pincfg.h
+++ b/arch/arm/plat-nomadik/include/plat/pincfg.h
@@ -24,6 +24,7 @@
  *	bit 16..18 - SLPM pull up/down state
  *	bit 19..20 - SLPM direction
  *	bit 21..22 - SLPM Value (if output)
+ *	bit 23..25 - PDIS value (if input)
  *
  * to facilitate the definition, the following macros are provided
  *
@@ -67,6 +68,10 @@ typedef unsigned long pin_cfg_t;
 /* These two replace the above in DB8500v2+ */
 #define PIN_SLPM_WAKEUP_ENABLE	(NMK_GPIO_SLPM_WAKEUP_ENABLE << PIN_SLPM_SHIFT)
 #define PIN_SLPM_WAKEUP_DISABLE	(NMK_GPIO_SLPM_WAKEUP_DISABLE << PIN_SLPM_SHIFT)
+#define PIN_SLPM_USE_MUX_SETTINGS_IN_SLEEP PIN_SLPM_WAKEUP_DISABLE
+
+#define PIN_SLPM_GPIO  PIN_SLPM_WAKEUP_ENABLE /* In SLPM, pin is a gpio */
+#define PIN_SLPM_ALTFUNC PIN_SLPM_WAKEUP_DISABLE /* In SLPM, pin is altfunc */
 
 #define PIN_DIR_SHIFT		14
 #define PIN_DIR_MASK		(0x1 << PIN_DIR_SHIFT)
@@ -105,6 +110,33 @@ typedef unsigned long pin_cfg_t;
 #define PIN_SLPM_VAL_LOW	((1 + 0) << PIN_SLPM_VAL_SHIFT)
 #define PIN_SLPM_VAL_HIGH	((1 + 1) << PIN_SLPM_VAL_SHIFT)
 
+#define PIN_SLPM_PDIS_SHIFT		23
+#define PIN_SLPM_PDIS_MASK		(0x3 << PIN_SLPM_PDIS_SHIFT)
+#define PIN_SLPM_PDIS(x)	\
+	(((x) & PIN_SLPM_PDIS_MASK) >> PIN_SLPM_PDIS_SHIFT)
+#define PIN_SLPM_PDIS_NO_CHANGE		(0 << PIN_SLPM_PDIS_SHIFT)
+#define PIN_SLPM_PDIS_DISABLED		(1 << PIN_SLPM_PDIS_SHIFT)
+#define PIN_SLPM_PDIS_ENABLED		(2 << PIN_SLPM_PDIS_SHIFT)
+
+#define PIN_LOWEMI_SHIFT	25
+#define PIN_LOWEMI_MASK		(0x1 << PIN_LOWEMI_SHIFT)
+#define PIN_LOWEMI(x)		(((x) & PIN_LOWEMI_MASK) >> PIN_LOWEMI_SHIFT)
+#define PIN_LOWEMI_DISABLED	(0 << PIN_LOWEMI_SHIFT)
+#define PIN_LOWEMI_ENABLED	(1 << PIN_LOWEMI_SHIFT)
+
+#define PIN_GPIOMODE_SHIFT	26
+#define PIN_GPIOMODE_MASK	(0x1 << PIN_GPIOMODE_SHIFT)
+#define PIN_GPIOMODE(x)		(((x) & PIN_GPIOMODE_MASK) >> PIN_GPIOMODE_SHIFT)
+#define PIN_GPIOMODE_DISABLED	(0 << PIN_GPIOMODE_SHIFT)
+#define PIN_GPIOMODE_ENABLED	(1 << PIN_GPIOMODE_SHIFT)
+
+#define PIN_SLEEPMODE_SHIFT	27
+#define PIN_SLEEPMODE_MASK	(0x1 << PIN_SLEEPMODE_SHIFT)
+#define PIN_SLEEPMODE(x)	(((x) & PIN_SLEEPMODE_MASK) >> PIN_SLEEPMODE_SHIFT)
+#define PIN_SLEEPMODE_DISABLED	(0 << PIN_SLEEPMODE_SHIFT)
+#define PIN_SLEEPMODE_ENABLED	(1 << PIN_SLEEPMODE_SHIFT)
+
+
 /* Shortcuts.  Use these instead of separate DIR, PULL, and VAL.  */
 #define PIN_INPUT_PULLDOWN	(PIN_DIR_INPUT | PIN_PULL_DOWN)
 #define PIN_INPUT_PULLUP	(PIN_DIR_INPUT | PIN_PULL_UP)
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index ce1e9b96ba1a..ad95c7a5d009 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -17,6 +17,7 @@ config ARCH_OMAP1
 	select IRQ_DOMAIN
 	select HAVE_IDE
 	select NEED_MACH_MEMORY_H
+	select NEED_MACH_IO_H if PCCARD
 	help
 	  "Systems based on omap7xx, omap15xx or omap16xx"
 
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index c0fe2757b695..ed8605f01155 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -9,9 +9,6 @@ obj-m :=
 obj-n :=
 obj-  :=
 
-# OCPI interconnect support for 1710, 1610 and 5912
-obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o
-
 # omap_device support (OMAP2+ only at the moment)
 obj-$(CONFIG_ARCH_OMAP2) += omap_device.o
 obj-$(CONFIG_ARCH_OMAP3) += omap_device.o
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 56b6f8b7053e..62ec5c452792 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -398,32 +398,6 @@ struct clk dummy_ck = {
 	.ops	= &clkops_null,
 };
 
-#ifdef CONFIG_CPU_FREQ
-void clk_init_cpufreq_table(struct cpufreq_frequency_table **table)
-{
-	unsigned long flags;
-
-	if (!arch_clock || !arch_clock->clk_init_cpufreq_table)
-		return;
-
-	spin_lock_irqsave(&clockfw_lock, flags);
-	arch_clock->clk_init_cpufreq_table(table);
-	spin_unlock_irqrestore(&clockfw_lock, flags);
-}
-
-void clk_exit_cpufreq_table(struct cpufreq_frequency_table **table)
-{
-	unsigned long flags;
-
-	if (!arch_clock || !arch_clock->clk_exit_cpufreq_table)
-		return;
-
-	spin_lock_irqsave(&clockfw_lock, flags);
-	arch_clock->clk_exit_cpufreq_table(table);
-	spin_unlock_irqrestore(&clockfw_lock, flags);
-}
-#endif
-
 /*
  *
  */
@@ -441,6 +415,8 @@ static int __init clk_disable_unused(void)
 		return 0;
 
 	pr_info("clock: disabling unused clocks to save power\n");
+
+	spin_lock_irqsave(&clockfw_lock, flags);
 	list_for_each_entry(ck, &clocks, node) {
 		if (ck->ops == &clkops_null)
 			continue;
@@ -448,10 +424,9 @@ static int __init clk_disable_unused(void)
 		if (ck->usecount > 0 || !ck->enable_reg)
 			continue;
 
-		spin_lock_irqsave(&clockfw_lock, flags);
 		arch_clock->clk_disable_unused(ck);
-		spin_unlock_irqrestore(&clockfw_lock, flags);
 	}
+	spin_unlock_irqrestore(&clockfw_lock, flags);
 
 	return 0;
 }
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index f1e46ea6b81d..0a9b9a970113 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -20,6 +20,7 @@
 #include <plat/board.h>
 #include <plat/vram.h>
 #include <plat/dsp.h>
+#include <plat/dma.h>
 
 #include <plat/omap-secure.h>
 
diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c
index 5068fe5a6910..2132c4f389e1 100644
--- a/arch/arm/plat-omap/counter_32k.c
+++ b/arch/arm/plat-omap/counter_32k.c
@@ -19,6 +19,7 @@
 #include <linux/io.h>
 #include <linux/clocksource.h>
 
+#include <asm/mach/time.h>
 #include <asm/sched_clock.h>
 
 #include <plat/hardware.h>
@@ -27,23 +28,24 @@
 
 #include <plat/clock.h>
 
+/* OMAP2_32KSYNCNT_CR_OFF: offset of 32ksync counter register */
+#define OMAP2_32KSYNCNT_CR_OFF		0x10
+
 /*
  * 32KHz clocksource ... always available, on pretty most chips except
  * OMAP 730 and 1510.  Other timers could be used as clocksources, with
  * higher resolution in free-running counter modes (e.g. 12 MHz xtal),
  * but systems won't necessarily want to spend resources that way.
  */
-static void __iomem *timer_32k_base;
-
-#define OMAP16XX_TIMER_32K_SYNCHRONIZED		0xfffbc410
+static void __iomem *sync32k_cnt_reg;
 
 static u32 notrace omap_32k_read_sched_clock(void)
 {
-	return timer_32k_base ? __raw_readl(timer_32k_base) : 0;
+	return sync32k_cnt_reg ? __raw_readl(sync32k_cnt_reg) : 0;
 }
 
 /**
- * read_persistent_clock -  Return time from a persistent clock.
+ * omap_read_persistent_clock -  Return time from a persistent clock.
  *
  * Reads the time from a source which isn't disabled during PM, the
  * 32k sync timer.  Convert the cycles elapsed since last read into
@@ -52,14 +54,14 @@ static u32 notrace omap_32k_read_sched_clock(void)
 static struct timespec persistent_ts;
 static cycles_t cycles, last_cycles;
 static unsigned int persistent_mult, persistent_shift;
-void read_persistent_clock(struct timespec *ts)
+static void omap_read_persistent_clock(struct timespec *ts)
 {
 	unsigned long long nsecs;
 	cycles_t delta;
 	struct timespec *tsp = &persistent_ts;
 
 	last_cycles = cycles;
-	cycles = timer_32k_base ? __raw_readl(timer_32k_base) : 0;
+	cycles = sync32k_cnt_reg ? __raw_readl(sync32k_cnt_reg) : 0;
 	delta = cycles - last_cycles;
 
 	nsecs = clocksource_cyc2ns(delta, persistent_mult, persistent_shift);
@@ -68,54 +70,41 @@ void read_persistent_clock(struct timespec *ts)
 	*ts = *tsp;
 }
 
-int __init omap_init_clocksource_32k(void)
+/**
+ * omap_init_clocksource_32k - setup and register counter 32k as a
+ * kernel clocksource
+ * @pbase: base addr of counter_32k module
+ * @size: size of counter_32k to map
+ *
+ * Returns 0 upon success or negative error code upon failure.
+ *
+ */
+int __init omap_init_clocksource_32k(void __iomem *vbase)
 {
-	static char err[] __initdata = KERN_ERR
-			"%s: can't register clocksource!\n";
-
-	if (cpu_is_omap16xx() || cpu_class_is_omap2()) {
-		u32 pbase;
-		unsigned long size = SZ_4K;
-		void __iomem *base;
-		struct clk *sync_32k_ick;
-
-		if (cpu_is_omap16xx()) {
-			pbase = OMAP16XX_TIMER_32K_SYNCHRONIZED;
-			size = SZ_1K;
-		} else if (cpu_is_omap2420())
-			pbase = OMAP2420_32KSYNCT_BASE + 0x10;
-		else if (cpu_is_omap2430())
-			pbase = OMAP2430_32KSYNCT_BASE + 0x10;
-		else if (cpu_is_omap34xx())
-			pbase = OMAP3430_32KSYNCT_BASE + 0x10;
-		else if (cpu_is_omap44xx())
-			pbase = OMAP4430_32KSYNCT_BASE + 0x10;
-		else
-			return -ENODEV;
-
-		/* For this to work we must have a static mapping in io.c for this area */
-		base = ioremap(pbase, size);
-		if (!base)
-			return -ENODEV;
-
-		sync_32k_ick = clk_get(NULL, "omap_32ksync_ick");
-		if (!IS_ERR(sync_32k_ick))
-			clk_enable(sync_32k_ick);
-
-		timer_32k_base = base;
-
-		/*
-		 * 120000 rough estimate from the calculations in
-		 * __clocksource_updatefreq_scale.
-		 */
-		clocks_calc_mult_shift(&persistent_mult, &persistent_shift,
-				32768, NSEC_PER_SEC, 120000);
-
-		if (clocksource_mmio_init(base, "32k_counter", 32768, 250, 32,
-					  clocksource_mmio_readl_up))
-			printk(err, "32k_counter");
-
-		setup_sched_clock(omap_32k_read_sched_clock, 32, 32768);
+	int ret;
+
+	/*
+	 * 32k sync Counter register offset is at 0x10
+	 */
+	sync32k_cnt_reg = vbase + OMAP2_32KSYNCNT_CR_OFF;
+
+	/*
+	 * 120000 rough estimate from the calculations in
+	 * __clocksource_updatefreq_scale.
+	 */
+	clocks_calc_mult_shift(&persistent_mult, &persistent_shift,
+			32768, NSEC_PER_SEC, 120000);
+
+	ret = clocksource_mmio_init(sync32k_cnt_reg, "32k_counter", 32768,
+				250, 32, clocksource_mmio_readl_up);
+	if (ret) {
+		pr_err("32k_counter: can't register clocksource\n");
+		return ret;
 	}
+
+	setup_sched_clock(omap_32k_read_sched_clock, 32, 32768);
+	register_persistent_clock(NULL, omap_read_persistent_clock);
+	pr_info("OMAP clocksource: 32k_counter at 32768 Hz\n");
+
 	return 0;
 }
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index 60278f47c0bd..1cba9273d2cb 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -28,54 +28,6 @@
 #include <plat/menelaus.h>
 #include <plat/omap44xx.h>
 
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
-	defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
-
-#define OMAP_MMC_NR_RES		2
-
-/*
- * Register MMC devices. Called from mach-omap1 and mach-omap2 device init.
- */
-int __init omap_mmc_add(const char *name, int id, unsigned long base,
-				unsigned long size, unsigned int irq,
-				struct omap_mmc_platform_data *data)
-{
-	struct platform_device *pdev;
-	struct resource res[OMAP_MMC_NR_RES];
-	int ret;
-
-	pdev = platform_device_alloc(name, id);
-	if (!pdev)
-		return -ENOMEM;
-
-	memset(res, 0, OMAP_MMC_NR_RES * sizeof(struct resource));
-	res[0].start = base;
-	res[0].end = base + size - 1;
-	res[0].flags = IORESOURCE_MEM;
-	res[1].start = res[1].end = irq;
-	res[1].flags = IORESOURCE_IRQ;
-
-	ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
-	if (ret == 0)
-		ret = platform_device_add_data(pdev, data, sizeof(*data));
-	if (ret)
-		goto fail;
-
-	ret = platform_device_add(pdev);
-	if (ret)
-		goto fail;
-
-	/* return device handle to board setup code */
-	data->dev = &pdev->dev;
-	return 0;
-
-fail:
-	platform_device_put(pdev);
-	return ret;
-}
-
-#endif
-
 /*-------------------------------------------------------------------------*/
 
 #if defined(CONFIG_HW_RANDOM_OMAP) || defined(CONFIG_HW_RANDOM_OMAP_MODULE)
@@ -109,79 +61,6 @@ static void omap_init_rng(void)
 static inline void omap_init_rng(void) {}
 #endif
 
-/*-------------------------------------------------------------------------*/
-
-/* Numbering for the SPI-capable controllers when used for SPI:
- * spi		= 1
- * uwire	= 2
- * mmc1..2	= 3..4
- * mcbsp1..3	= 5..7
- */
-
-#if defined(CONFIG_SPI_OMAP_UWIRE) || defined(CONFIG_SPI_OMAP_UWIRE_MODULE)
-
-#define	OMAP_UWIRE_BASE		0xfffb3000
-
-static struct resource uwire_resources[] = {
-	{
-		.start		= OMAP_UWIRE_BASE,
-		.end		= OMAP_UWIRE_BASE + 0x20,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device omap_uwire_device = {
-	.name	   = "omap_uwire",
-	.id	     = -1,
-	.num_resources	= ARRAY_SIZE(uwire_resources),
-	.resource	= uwire_resources,
-};
-
-static void omap_init_uwire(void)
-{
-	/* FIXME define and use a boot tag; not all boards will be hooking
-	 * up devices to the microwire controller, and multi-board configs
-	 * mean that CONFIG_SPI_OMAP_UWIRE may be configured anyway...
-	 */
-
-	/* board-specific code must configure chipselects (only a few
-	 * are normally used) and SCLK/SDI/SDO (each has two choices).
-	 */
-	(void) platform_device_register(&omap_uwire_device);
-}
-#else
-static inline void omap_init_uwire(void) {}
-#endif
-
-#if defined(CONFIG_TIDSPBRIDGE) || defined(CONFIG_TIDSPBRIDGE_MODULE)
-
-static phys_addr_t omap_dsp_phys_mempool_base;
-
-void __init omap_dsp_reserve_sdram_memblock(void)
-{
-	phys_addr_t size = CONFIG_TIDSPBRIDGE_MEMPOOL_SIZE;
-	phys_addr_t paddr;
-
-	if (!size)
-		return;
-
-	paddr = arm_memblock_steal(size, SZ_1M);
-	if (!paddr) {
-		pr_err("%s: failed to reserve %x bytes\n",
-				__func__, size);
-		return;
-	}
-
-	omap_dsp_phys_mempool_base = paddr;
-}
-
-phys_addr_t omap_dsp_get_mempool_base(void)
-{
-	return omap_dsp_phys_mempool_base;
-}
-EXPORT_SYMBOL(omap_dsp_get_mempool_base);
-#endif
-
 /*
  * This gets called after board-specific INIT_MACHINE, and initializes most
  * on-chip peripherals accessible on this board (except for few like USB):
@@ -208,7 +87,6 @@ static int __init omap_init_devices(void)
 	 * in alphabetical order so they're easier to sort through.
 	 */
 	omap_init_rng();
-	omap_init_uwire();
 	return 0;
 }
 arch_initcall(omap_init_devices);
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index ecdb3da0dea9..cb16ade437cb 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -41,6 +41,15 @@
 
 #include <plat/tc.h>
 
+/*
+ * MAX_LOGICAL_DMA_CH_COUNT: the maximum number of logical DMA
+ * channels that an instance of the SDMA IP block can support.  Used
+ * to size arrays.  (The actual maximum on a particular SoC may be less
+ * than this -- for example, OMAP1 SDMA instances only support 17 logical
+ * DMA channels.)
+ */
+#define MAX_LOGICAL_DMA_CH_COUNT		32
+
 #undef DEBUG
 
 #ifndef CONFIG_ARCH_OMAP1
@@ -843,7 +852,7 @@ omap_dma_set_prio_lch(int lch, unsigned char read_prio,
 	}
 	l = p->dma_read(CCR, lch);
 	l &= ~((1 << 6) | (1 << 26));
-	if (cpu_is_omap2430() || cpu_is_omap34xx() ||  cpu_is_omap44xx())
+	if (cpu_class_is_omap2() && !cpu_is_omap242x())
 		l |= ((read_prio & 0x1) << 6) | ((write_prio & 0x1) << 26);
 	else
 		l |= ((read_prio & 0x1) << 6);
@@ -883,7 +892,7 @@ void omap_start_dma(int lch)
 
 	if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
 		int next_lch, cur_lch;
-		char dma_chan_link_map[dma_lch_count];
+		char dma_chan_link_map[MAX_LOGICAL_DMA_CH_COUNT];
 
 		dma_chan_link_map[lch] = 1;
 		/* Set the link register of the first channel */
@@ -916,6 +925,13 @@ void omap_start_dma(int lch)
 			l |= OMAP_DMA_CCR_BUFFERING_DISABLE;
 	l |= OMAP_DMA_CCR_EN;
 
+	/*
+	 * As dma_write() uses IO accessors which are weakly ordered, there
+	 * is no guarantee that data in coherent DMA memory will be visible
+	 * to the DMA device.  Add a memory barrier here to ensure that any
+	 * such data is visible prior to enabling DMA.
+	 */
+	mb();
 	p->dma_write(l, CCR, lch);
 
 	dma_chan[lch].flags |= OMAP_DMA_ACTIVE;
@@ -965,9 +981,16 @@ void omap_stop_dma(int lch)
 		p->dma_write(l, CCR, lch);
 	}
 
+	/*
+	 * Ensure that data transferred by DMA is visible to any access
+	 * after DMA has been disabled.  This is important for coherent
+	 * DMA regions.
+	 */
+	mb();
+
 	if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
 		int next_lch, cur_lch = lch;
-		char dma_chan_link_map[dma_lch_count];
+		char dma_chan_link_map[MAX_LOGICAL_DMA_CH_COUNT];
 
 		memset(dma_chan_link_map, 0, sizeof(dma_chan_link_map));
 		do {
@@ -2057,7 +2080,7 @@ static int __devinit omap_system_dma_probe(struct platform_device *pdev)
 		}
 	}
 
-	if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx())
+	if (cpu_class_is_omap2() && !cpu_is_omap242x())
 		omap_dma_set_global_params(DMA_DEFAULT_ARB_RATE,
 				DMA_DEFAULT_FIFO_DEPTH, 0);
 
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 652139c0339e..3b0cfeb33d05 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -82,8 +82,6 @@ static void omap_dm_timer_write_reg(struct omap_dm_timer *timer, u32 reg,
 
 static void omap_timer_restore_context(struct omap_dm_timer *timer)
 {
-	__raw_writel(timer->context.tiocp_cfg,
-			timer->io_base + OMAP_TIMER_OCP_CFG_OFFSET);
 	if (timer->revision == 1)
 		__raw_writel(timer->context.tistat, timer->sys_stat);
 
@@ -349,11 +347,12 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_start);
 int omap_dm_timer_stop(struct omap_dm_timer *timer)
 {
 	unsigned long rate = 0;
-	struct dmtimer_platform_data *pdata = timer->pdev->dev.platform_data;
+	struct dmtimer_platform_data *pdata;
 
 	if (unlikely(!timer))
 		return -EINVAL;
 
+	pdata = timer->pdev->dev.platform_data;
 	if (!pdata->needs_manual_reset)
 		rate = clk_get_rate(timer->fclk);
 
diff --git a/arch/arm/plat-omap/include/plat/board.h b/arch/arm/plat-omap/include/plat/board.h
index d5eb4c87db9d..4814c5b65306 100644
--- a/arch/arm/plat-omap/include/plat/board.h
+++ b/arch/arm/plat-omap/include/plat/board.h
@@ -91,6 +91,8 @@ struct omap_usb_config {
 	u32 (*usb0_init)(unsigned nwires, unsigned is_device);
 	u32 (*usb1_init)(unsigned nwires);
 	u32 (*usb2_init)(unsigned nwires, unsigned alt_pingroup);
+
+	int (*ocpi_enable)(void);
 };
 
 struct omap_lcd_config {
diff --git a/arch/arm/plat-omap/include/plat/clkdev_omap.h b/arch/arm/plat-omap/include/plat/clkdev_omap.h
index b299b8d201c8..d0ed8c443a63 100644
--- a/arch/arm/plat-omap/include/plat/clkdev_omap.h
+++ b/arch/arm/plat-omap/include/plat/clkdev_omap.h
@@ -34,8 +34,7 @@ struct omap_clk {
 #define CK_243X		(1 << 5)	/* 243x, 253x */
 #define CK_3430ES1	(1 << 6)	/* 34xxES1 only */
 #define CK_3430ES2PLUS	(1 << 7)	/* 34xxES2, ES3, non-Sitara 35xx only */
-#define CK_3505		(1 << 8)
-#define CK_3517		(1 << 9)
+#define CK_AM35XX	(1 << 9)	/* Sitara AM35xx */
 #define CK_36XX		(1 << 10)	/* 36xx/37xx-specific clocks */
 #define CK_443X		(1 << 11)
 #define CK_TI816X	(1 << 12)
@@ -44,7 +43,6 @@ struct omap_clk {
 
 
 #define CK_34XX		(CK_3430ES1 | CK_3430ES2PLUS)
-#define CK_AM35XX	(CK_3505 | CK_3517)	/* all Sitara AM35xx */
 #define CK_3XXX		(CK_34XX | CK_AM35XX | CK_36XX)
 
 
diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h
index 240a7b9fd946..d0ef57c1d71b 100644
--- a/arch/arm/plat-omap/include/plat/clock.h
+++ b/arch/arm/plat-omap/include/plat/clock.h
@@ -272,8 +272,6 @@ struct clk {
 #endif
 };
 
-struct cpufreq_frequency_table;
-
 struct clk_functions {
 	int		(*clk_enable)(struct clk *clk);
 	void		(*clk_disable)(struct clk *clk);
@@ -283,10 +281,6 @@ struct clk_functions {
 	void		(*clk_allow_idle)(struct clk *clk);
 	void		(*clk_deny_idle)(struct clk *clk);
 	void		(*clk_disable_unused)(struct clk *clk);
-#ifdef CONFIG_CPU_FREQ
-	void		(*clk_init_cpufreq_table)(struct cpufreq_frequency_table **);
-	void		(*clk_exit_cpufreq_table)(struct cpufreq_frequency_table **);
-#endif
 };
 
 extern int mpurate;
@@ -301,10 +295,6 @@ extern void recalculate_root_clocks(void);
 extern unsigned long followparent_recalc(struct clk *clk);
 extern void clk_enable_init_clocks(void);
 unsigned long omap_fixed_divisor_recalc(struct clk *clk);
-#ifdef CONFIG_CPU_FREQ
-extern void clk_init_cpufreq_table(struct cpufreq_frequency_table **table);
-extern void clk_exit_cpufreq_table(struct cpufreq_frequency_table **table);
-#endif
 extern struct clk *omap_clk_get_by_name(const char *name);
 extern int omap_clk_enable_autoidle_all(void);
 extern int omap_clk_disable_autoidle_all(void);
diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h
index b4d7ec3fbfbe..d1cb6f527b7e 100644
--- a/arch/arm/plat-omap/include/plat/common.h
+++ b/arch/arm/plat-omap/include/plat/common.h
@@ -30,7 +30,9 @@
 #include <plat/i2c.h>
 #include <plat/omap_hwmod.h>
 
-extern int __init omap_init_clocksource_32k(void);
+extern int __init omap_init_clocksource_32k(void __iomem *vbase);
+
+extern void __init omap_check_revision(void);
 
 extern void omap_reserve(void);
 extern int omap_dss_reset(struct omap_hwmod *);
diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
index dc6a86bf2172..297245dba66e 100644
--- a/arch/arm/plat-omap/include/plat/cpu.h
+++ b/arch/arm/plat-omap/include/plat/cpu.h
@@ -121,6 +121,7 @@ IS_OMAP_CLASS(16xx, 0x16)
 IS_OMAP_CLASS(24xx, 0x24)
 IS_OMAP_CLASS(34xx, 0x34)
 IS_OMAP_CLASS(44xx, 0x44)
+IS_AM_CLASS(35xx, 0x35)
 IS_AM_CLASS(33xx, 0x33)
 
 IS_TI_CLASS(81xx, 0x81)
@@ -148,6 +149,7 @@ IS_AM_SUBCLASS(335x, 0x335)
 #define cpu_is_ti81xx()			0
 #define cpu_is_ti816x()			0
 #define cpu_is_ti814x()			0
+#define soc_is_am35xx()			0
 #define cpu_is_am33xx()			0
 #define cpu_is_am335x()			0
 #define cpu_is_omap44xx()		0
@@ -357,6 +359,7 @@ IS_OMAP_TYPE(3517, 0x3517)
 # undef cpu_is_ti81xx
 # undef cpu_is_ti816x
 # undef cpu_is_ti814x
+# undef soc_is_am35xx
 # undef cpu_is_am33xx
 # undef cpu_is_am335x
 # define cpu_is_omap3430()		is_omap3430()
@@ -378,6 +381,7 @@ IS_OMAP_TYPE(3517, 0x3517)
 # define cpu_is_ti81xx()		is_ti81xx()
 # define cpu_is_ti816x()		is_ti816x()
 # define cpu_is_ti814x()		is_ti814x()
+# define soc_is_am35xx()		is_am35xx()
 # define cpu_is_am33xx()		is_am33xx()
 # define cpu_is_am335x()		is_am335x()
 #endif
@@ -433,6 +437,10 @@ IS_OMAP_TYPE(3517, 0x3517)
 #define TI8148_REV_ES2_0	(TI814X_CLASS | (0x1 << 8))
 #define TI8148_REV_ES2_1	(TI814X_CLASS | (0x2 << 8))
 
+#define AM35XX_CLASS		0x35170034
+#define AM35XX_REV_ES1_0	AM35XX_CLASS
+#define AM35XX_REV_ES1_1	(AM35XX_CLASS | (0x1 << 8))
+
 #define AM335X_CLASS		0x33500034
 #define AM335X_REV_ES1_0	AM335X_CLASS
 
@@ -445,6 +453,7 @@ IS_OMAP_TYPE(3517, 0x3517)
 
 #define OMAP446X_CLASS		0x44600044
 #define OMAP4460_REV_ES1_0	(OMAP446X_CLASS | (0x10 << 8))
+#define OMAP4460_REV_ES1_1	(OMAP446X_CLASS | (0x11 << 8))
 
 #define OMAP447X_CLASS		0x44700044
 #define OMAP4470_REV_ES1_0	(OMAP447X_CLASS | (0x10 << 8))
diff --git a/arch/arm/plat-omap/include/plat/dma.h b/arch/arm/plat-omap/include/plat/dma.h
index dc562a5c0a8a..c5811d4409b0 100644
--- a/arch/arm/plat-omap/include/plat/dma.h
+++ b/arch/arm/plat-omap/include/plat/dma.h
@@ -312,6 +312,11 @@
 #define CLEAR_CSR_ON_READ		BIT(0xC)
 #define IS_WORD_16			BIT(0xD)
 
+/* Defines for DMA Capabilities */
+#define DMA_HAS_TRANSPARENT_CAPS	(0x1 << 18)
+#define DMA_HAS_CONSTANT_FILL_CAPS	(0x1 << 19)
+#define DMA_HAS_DESCRIPTOR_CAPS		(0x3 << 20)
+
 enum omap_reg_offsets {
 
 GCR,		GSCR,		GRST1,		HW_ID,
@@ -442,6 +447,7 @@ struct omap_system_dma_plat_info {
 	u32 (*dma_read)(int reg, int lch);
 };
 
+extern void __init omap_init_consistent_dma_size(void);
 extern void omap_set_dma_priority(int lch, int dst_port, int priority);
 extern int omap_request_dma(int dev_id, const char *dev_name,
 			void (*callback)(int lch, u16 ch_status, void *data),
diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h
index 9418f00b6c38..5da73562e486 100644
--- a/arch/arm/plat-omap/include/plat/dmtimer.h
+++ b/arch/arm/plat-omap/include/plat/dmtimer.h
@@ -75,7 +75,6 @@ struct clk;
 
 struct timer_regs {
 	u32 tidr;
-	u32 tiocp_cfg;
 	u32 tistat;
 	u32 tisr;
 	u32 tier;
@@ -259,7 +258,7 @@ struct omap_dm_timer {
 	unsigned long phys_base;
 	int id;
 	int irq;
-	struct clk *iclk, *fclk;
+	struct clk *fclk;
 
 	void __iomem	*io_base;
 	void __iomem	*sys_stat;	/* TISTAT timer status */
@@ -316,12 +315,12 @@ static inline void __omap_dm_timer_init_regs(struct omap_dm_timer *timer)
 				OMAP_TIMER_V1_SYS_STAT_OFFSET;
 		timer->irq_stat = timer->io_base + OMAP_TIMER_V1_STAT_OFFSET;
 		timer->irq_ena = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET;
-		timer->irq_dis = 0;
+		timer->irq_dis = NULL;
 		timer->pend = timer->io_base + _OMAP_TIMER_WRITE_PEND_OFFSET;
 		timer->func_base = timer->io_base;
 	} else {
 		timer->revision = 2;
-		timer->sys_stat = 0;
+		timer->sys_stat = NULL;
 		timer->irq_stat = timer->io_base + OMAP_TIMER_V2_IRQSTATUS;
 		timer->irq_ena = timer->io_base + OMAP_TIMER_V2_IRQENABLE_SET;
 		timer->irq_dis = timer->io_base + OMAP_TIMER_V2_IRQENABLE_CLR;
diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h
index 2f6e9924a814..50fb7cc000ea 100644
--- a/arch/arm/plat-omap/include/plat/gpio.h
+++ b/arch/arm/plat-omap/include/plat/gpio.h
@@ -172,6 +172,8 @@ struct omap_gpio_reg_offs {
 	u16 clr_dataout;
 	u16 irqstatus;
 	u16 irqstatus2;
+	u16 irqstatus_raw0;
+	u16 irqstatus_raw1;
 	u16 irqenable;
 	u16 irqenable2;
 	u16 set_irqenable;
@@ -193,7 +195,6 @@ struct omap_gpio_reg_offs {
 };
 
 struct omap_gpio_platform_data {
-	u16 virtual_irq_start;
 	int bank_type;
 	int bank_width;		/* GPIO bank width */
 	int bank_stride;	/* Only needed for omap1 MPUIO */
diff --git a/arch/arm/plat-omap/include/plat/hdq1w.h b/arch/arm/plat-omap/include/plat/hdq1w.h
new file mode 100644
index 000000000000..0c1efc846d8d
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/hdq1w.h
@@ -0,0 +1,36 @@
+/*
+ * Shared macros and function prototypes for the HDQ1W/1-wire IP block
+ *
+ * Copyright (C) 2012 Texas Instruments, Inc.
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+#ifndef ARCH_ARM_MACH_OMAP2_HDQ1W_H
+#define ARCH_ARM_MACH_OMAP2_HDQ1W_H
+
+#include <plat/omap_hwmod.h>
+
+/*
+ * XXX A future cleanup patch should modify
+ * drivers/w1/masters/omap_hdq.c to use these macros
+ */
+#define HDQ_CTRL_STATUS_OFFSET			0x0c
+#define HDQ_CTRL_STATUS_CLOCKENABLE_SHIFT	5
+
+
+extern int omap_hdq1w_reset(struct omap_hwmod *oh);
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h
index 7a38750c0079..a7754a886d42 100644
--- a/arch/arm/plat-omap/include/plat/mmc.h
+++ b/arch/arm/plat-omap/include/plat/mmc.h
@@ -16,6 +16,7 @@
 #include <linux/mmc/host.h>
 
 #include <plat/board.h>
+#include <plat/omap_hwmod.h>
 
 #define OMAP15XX_NR_MMC		1
 #define OMAP16XX_NR_MMC		2
@@ -176,9 +177,6 @@ extern void omap_mmc_notify_cover_event(struct device *dev, int slot,
 void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
 				int nr_controllers);
 void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data);
-int omap_mmc_add(const char *name, int id, unsigned long base,
-				unsigned long size, unsigned int irq,
-				struct omap_mmc_platform_data *data);
 #else
 static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
 				int nr_controllers)
@@ -187,12 +185,9 @@ static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
 static inline void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data)
 {
 }
-static inline int omap_mmc_add(const char *name, int id, unsigned long base,
-				unsigned long size, unsigned int irq,
-				struct omap_mmc_platform_data *data)
-{
-	return 0;
-}
 
 #endif
+
+extern int omap_msdi_reset(struct omap_hwmod *oh);
+
 #endif
diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h
index 9ff444469f3d..1a52725ffcf2 100644
--- a/arch/arm/plat-omap/include/plat/omap-serial.h
+++ b/arch/arm/plat-omap/include/plat/omap-serial.h
@@ -65,7 +65,6 @@ struct omap_uart_port_info {
 	bool			dma_enabled;	/* To specify DMA Mode */
 	unsigned int		uartclk;	/* UART clock rate */
 	upf_t			flags;		/* UPF_* flags */
-	u32			errata;
 	unsigned int		dma_rx_buf_size;
 	unsigned int		dma_rx_timeout;
 	unsigned int		autosuspend_timeout;
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index 9e8e63d52aab..c835b7194ff5 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -47,17 +47,17 @@ extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2;
  * with the original PRCM protocol defined for OMAP2420
  */
 #define SYSC_TYPE1_MIDLEMODE_SHIFT	12
-#define SYSC_TYPE1_MIDLEMODE_MASK	(0x3 << SYSC_MIDLEMODE_SHIFT)
+#define SYSC_TYPE1_MIDLEMODE_MASK	(0x3 << SYSC_TYPE1_MIDLEMODE_SHIFT)
 #define SYSC_TYPE1_CLOCKACTIVITY_SHIFT	8
-#define SYSC_TYPE1_CLOCKACTIVITY_MASK	(0x3 << SYSC_CLOCKACTIVITY_SHIFT)
+#define SYSC_TYPE1_CLOCKACTIVITY_MASK	(0x3 << SYSC_TYPE1_CLOCKACTIVITY_SHIFT)
 #define SYSC_TYPE1_SIDLEMODE_SHIFT	3
-#define SYSC_TYPE1_SIDLEMODE_MASK	(0x3 << SYSC_SIDLEMODE_SHIFT)
+#define SYSC_TYPE1_SIDLEMODE_MASK	(0x3 << SYSC_TYPE1_SIDLEMODE_SHIFT)
 #define SYSC_TYPE1_ENAWAKEUP_SHIFT	2
-#define SYSC_TYPE1_ENAWAKEUP_MASK	(1 << SYSC_ENAWAKEUP_SHIFT)
+#define SYSC_TYPE1_ENAWAKEUP_MASK	(1 << SYSC_TYPE1_ENAWAKEUP_SHIFT)
 #define SYSC_TYPE1_SOFTRESET_SHIFT	1
-#define SYSC_TYPE1_SOFTRESET_MASK	(1 << SYSC_SOFTRESET_SHIFT)
+#define SYSC_TYPE1_SOFTRESET_MASK	(1 << SYSC_TYPE1_SOFTRESET_SHIFT)
 #define SYSC_TYPE1_AUTOIDLE_SHIFT	0
-#define SYSC_TYPE1_AUTOIDLE_MASK	(1 << SYSC_AUTOIDLE_SHIFT)
+#define SYSC_TYPE1_AUTOIDLE_MASK	(1 << SYSC_TYPE1_AUTOIDLE_SHIFT)
 
 /*
  * OCP SYSCONFIG bit shifts/masks TYPE2. These are for IPs compliant
@@ -213,11 +213,17 @@ struct omap_hwmod_addr_space {
  */
 #define OCP_USER_MPU			(1 << 0)
 #define OCP_USER_SDMA			(1 << 1)
+#define OCP_USER_DSP			(1 << 2)
+#define OCP_USER_IVA			(1 << 3)
 
 /* omap_hwmod_ocp_if.flags bits */
 #define OCPIF_SWSUP_IDLE		(1 << 0)
 #define OCPIF_CAN_BURST			(1 << 1)
 
+/* omap_hwmod_ocp_if._int_flags possibilities */
+#define _OCPIF_INT_FLAGS_REGISTERED	(1 << 0)
+
+
 /**
  * struct omap_hwmod_ocp_if - OCP interface data
  * @master: struct omap_hwmod that initiates OCP transactions on this link
@@ -229,6 +235,7 @@ struct omap_hwmod_addr_space {
  * @width: OCP data width
  * @user: initiators using this interface (see OCP_USER_* macros above)
  * @flags: OCP interface flags (see OCPIF_* macros above)
+ * @_int_flags: internal flags (see _OCPIF_INT_FLAGS* macros above)
  *
  * It may also be useful to add a tag_cnt field for OCP2.x devices.
  *
@@ -247,6 +254,7 @@ struct omap_hwmod_ocp_if {
 	u8				width;
 	u8				user;
 	u8				flags;
+	u8				_int_flags;
 };
 
 
@@ -305,6 +313,7 @@ struct omap_hwmod_sysc_fields {
  * @rev_offs: IP block revision register offset (from module base addr)
  * @sysc_offs: OCP_SYSCONFIG register offset (from module base addr)
  * @syss_offs: OCP_SYSSTATUS register offset (from module base addr)
+ * @srst_udelay: Delay needed after doing a softreset in usecs
  * @idlemodes: One or more of {SIDLE,MSTANDBY}_{OFF,FORCE,SMART}
  * @sysc_flags: SYS{C,S}_HAS* flags indicating SYSCONFIG bits supported
  * @clockact: the default value of the module CLOCKACTIVITY bits
@@ -326,13 +335,14 @@ struct omap_hwmod_sysc_fields {
  * then this field has to be populated with the correct offset structure.
  */
 struct omap_hwmod_class_sysconfig {
-	u16 rev_offs;
-	u16 sysc_offs;
-	u16 syss_offs;
+	u32 rev_offs;
+	u32 sysc_offs;
+	u32 syss_offs;
 	u16 sysc_flags;
+	struct omap_hwmod_sysc_fields *sysc_fields;
+	u8 srst_udelay;
 	u8 idlemodes;
 	u8 clockact;
-	struct omap_hwmod_sysc_fields *sysc_fields;
 };
 
 /**
@@ -474,6 +484,16 @@ struct omap_hwmod_class {
 };
 
 /**
+ * struct omap_hwmod_link - internal structure linking hwmods with ocp_ifs
+ * @ocp_if: OCP interface structure record pointer
+ * @node: list_head pointing to next struct omap_hwmod_link in a list
+ */
+struct omap_hwmod_link {
+	struct omap_hwmod_ocp_if	*ocp_if;
+	struct list_head		node;
+};
+
+/**
  * struct omap_hwmod - integration data for OMAP hardware "modules" (IP blocks)
  * @name: name of the hwmod
  * @class: struct omap_hwmod_class * to the class of this hwmod
@@ -485,12 +505,10 @@ struct omap_hwmod_class {
  * @_clk: pointer to the main struct clk (filled in at runtime)
  * @opt_clks: other device clocks that drivers can request (0..*)
  * @voltdm: pointer to voltage domain (filled in at runtime)
- * @masters: ptr to array of OCP ifs that this hwmod can initiate on
- * @slaves: ptr to array of OCP ifs that this hwmod can respond on
  * @dev_attr: arbitrary device attributes that can be passed to the driver
  * @_sysc_cache: internal-use hwmod flags
  * @_mpu_rt_va: cached register target start address (internal use)
- * @_mpu_port_index: cached MPU register target slave ID (internal use)
+ * @_mpu_port: cached MPU register target slave (internal use)
  * @opt_clks_cnt: number of @opt_clks
  * @master_cnt: number of @master entries
  * @slaves_cnt: number of @slave entries
@@ -509,6 +527,8 @@ struct omap_hwmod_class {
  *
  * Parameter names beginning with an underscore are managed internally by
  * the omap_hwmod code and should not be set during initialization.
+ *
+ * @masters and @slaves are now deprecated.
  */
 struct omap_hwmod {
 	const char			*name;
@@ -527,15 +547,15 @@ struct omap_hwmod {
 	struct omap_hwmod_opt_clk	*opt_clks;
 	char				*clkdm_name;
 	struct clockdomain		*clkdm;
-	struct omap_hwmod_ocp_if	**masters; /* connect to *_IA */
-	struct omap_hwmod_ocp_if	**slaves;  /* connect to *_TA */
+	struct list_head		master_ports; /* connect to *_IA */
+	struct list_head		slave_ports; /* connect to *_TA */
 	void				*dev_attr;
 	u32				_sysc_cache;
 	void __iomem			*_mpu_rt_va;
 	spinlock_t			_lock;
 	struct list_head		node;
+	struct omap_hwmod_ocp_if	*_mpu_port;
 	u16				flags;
-	u8				_mpu_port_index;
 	u8				response_lat;
 	u8				rst_lines_cnt;
 	u8				opt_clks_cnt;
@@ -547,7 +567,6 @@ struct omap_hwmod {
 	u8				_postsetup_state;
 };
 
-int omap_hwmod_register(struct omap_hwmod **ohs);
 struct omap_hwmod *omap_hwmod_lookup(const char *name);
 int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data),
 			void *data);
@@ -579,6 +598,8 @@ int omap_hwmod_softreset(struct omap_hwmod *oh);
 
 int omap_hwmod_count_resources(struct omap_hwmod *oh);
 int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res);
+int omap_hwmod_get_resource_byname(struct omap_hwmod *oh, unsigned int type,
+				   const char *name, struct resource *res);
 
 struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh);
 void __iomem *omap_hwmod_get_mpu_rt_va(struct omap_hwmod *oh);
@@ -617,4 +638,6 @@ extern int omap2430_hwmod_init(void);
 extern int omap3xxx_hwmod_init(void);
 extern int omap44xx_hwmod_init(void);
 
+extern int __init omap_hwmod_register_links(struct omap_hwmod_ocp_if **ois);
+
 #endif
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
index d50cbc6385bd..c490240bb82c 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/plat-omap/omap_device.c
@@ -475,13 +475,11 @@ static int omap_device_count_resources(struct omap_device *od)
 static int omap_device_fill_resources(struct omap_device *od,
 				      struct resource *res)
 {
-	int c = 0;
 	int i, r;
 
 	for (i = 0; i < od->hwmods_cnt; i++) {
 		r = omap_hwmod_fill_resources(od->hwmods[i], res);
 		res += r;
-		c += r;
 	}
 
 	return 0;
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index eec98afa0f83..477363c163ec 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -196,8 +196,8 @@ static void __init omap_map_sram(void)
 	 * Looks like we need to preserve some bootloader code at the
 	 * beginning of SRAM for jumping to flash for reboot to work...
 	 */
-	memset((void *)omap_sram_base + SRAM_BOOTLOADER_SZ, 0,
-	       omap_sram_size - SRAM_BOOTLOADER_SZ);
+	memset_io(omap_sram_base + SRAM_BOOTLOADER_SZ, 0,
+		  omap_sram_size - SRAM_BOOTLOADER_SZ);
 }
 
 /*
@@ -348,7 +348,6 @@ u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc,
 			sdrc_actim_ctrl_b_1, sdrc_mr_1);
 }
 
-#ifdef CONFIG_PM
 void omap3_sram_restore_context(void)
 {
 	omap_sram_ceil = omap_sram_base + omap_sram_size;
@@ -358,17 +357,18 @@ void omap3_sram_restore_context(void)
 			       omap3_sram_configure_core_dpll_sz);
 	omap_push_sram_idle();
 }
-#endif /* CONFIG_PM */
-
-#endif /* CONFIG_ARCH_OMAP3 */
 
 static inline int omap34xx_sram_init(void)
 {
-#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
 	omap3_sram_restore_context();
-#endif
 	return 0;
 }
+#else
+static inline int omap34xx_sram_init(void)
+{
+	return 0;
+}
+#endif /* CONFIG_ARCH_OMAP3 */
 
 static inline int am33xx_sram_init(void)
 {
diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c
index d2bbfd1cb0b5..daa0327381b5 100644
--- a/arch/arm/plat-omap/usb.c
+++ b/arch/arm/plat-omap/usb.c
@@ -31,15 +31,12 @@
 
 #include <mach/hardware.h>
 
-#include "../mach-omap2/common.h"
-
 #ifdef	CONFIG_ARCH_OMAP_OTG
 
 void __init
 omap_otg_init(struct omap_usb_config *config)
 {
 	u32		syscon;
-	int		status;
 	int		alt_pingroup = 0;
 
 	/* NOTE:  no bus or clock setup (yet?) */
@@ -104,6 +101,7 @@ omap_otg_init(struct omap_usb_config *config)
 #ifdef	CONFIG_USB_GADGET_OMAP
 	if (config->otg || config->register_dev) {
 		struct platform_device *udc_device = config->udc_device;
+		int status;
 
 		syscon &= ~DEV_IDLE_EN;
 		udc_device->dev.platform_data = config;
@@ -116,6 +114,7 @@ omap_otg_init(struct omap_usb_config *config)
 #if	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 	if (config->otg || config->register_host) {
 		struct platform_device *ohci_device = config->ohci_device;
+		int status;
 
 		syscon &= ~HST_IDLE_EN;
 		ohci_device->dev.platform_data = config;
@@ -128,6 +127,7 @@ omap_otg_init(struct omap_usb_config *config)
 #ifdef	CONFIG_USB_OTG
 	if (config->otg) {
 		struct platform_device *otg_device = config->otg_device;
+		int status;
 
 		syscon &= ~OTG_IDLE_EN;
 		otg_device->dev.platform_data = config;
@@ -138,8 +138,6 @@ omap_otg_init(struct omap_usb_config *config)
 #endif
 	pr_debug("OTG_SYSCON_1 = %08x\n", omap_readl(OTG_SYSCON_1));
 	omap_writel(syscon, OTG_SYSCON_1);
-
-	status = 0;
 }
 
 #else
diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c
index 74daf5ed1432..61fd837624a8 100644
--- a/arch/arm/plat-orion/common.c
+++ b/arch/arm/plat-orion/common.c
@@ -14,15 +14,41 @@
 #include <linux/dma-mapping.h>
 #include <linux/serial_8250.h>
 #include <linux/ata_platform.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/mv643xx_i2c.h>
 #include <net/dsa.h>
-#include <linux/spi/orion_spi.h>
-#include <plat/orion_wdt.h>
 #include <plat/mv_xor.h>
 #include <plat/ehci-orion.h>
 #include <mach/bridge-regs.h>
 
+/* Create a clkdev entry for a given device/clk */
+void __init orion_clkdev_add(const char *con_id, const char *dev_id,
+			     struct clk *clk)
+{
+	struct clk_lookup *cl;
+
+	cl = clkdev_alloc(clk, con_id, dev_id);
+	if (cl)
+		clkdev_add(cl);
+}
+
+/* Create clkdev entries for all orion platforms except kirkwood.
+   Kirkwood has gated clocks for some of its peripherals, so creates
+   its own clkdev entries. For all the other orion devices, create
+   clkdev entries to the tclk. */
+void __init orion_clkdev_init(struct clk *tclk)
+{
+	orion_clkdev_add(NULL, "orion_spi.0", tclk);
+	orion_clkdev_add(NULL, "orion_spi.1", tclk);
+	orion_clkdev_add(NULL, MV643XX_ETH_NAME ".0", tclk);
+	orion_clkdev_add(NULL, MV643XX_ETH_NAME ".1", tclk);
+	orion_clkdev_add(NULL, MV643XX_ETH_NAME ".2", tclk);
+	orion_clkdev_add(NULL, MV643XX_ETH_NAME ".3", tclk);
+	orion_clkdev_add(NULL, "orion_wdt", tclk);
+}
+
 /* Fill in the resources structure and link it into the platform
    device structure. There is always a memory region, and nearly
    always an interrupt.*/
@@ -49,6 +75,12 @@ static void fill_resources(struct platform_device *device,
 /*****************************************************************************
  * UART
  ****************************************************************************/
+static unsigned long __init uart_get_clk_rate(struct clk *clk)
+{
+	clk_prepare_enable(clk);
+	return clk_get_rate(clk);
+}
+
 static void __init uart_complete(
 	struct platform_device *orion_uart,
 	struct plat_serial8250_port *data,
@@ -56,12 +88,12 @@ static void __init uart_complete(
 	unsigned int membase,
 	resource_size_t mapbase,
 	unsigned int irq,
-	unsigned int uartclk)
+	struct clk *clk)
 {
 	data->mapbase = mapbase;
 	data->membase = (void __iomem *)membase;
 	data->irq = irq;
-	data->uartclk = uartclk;
+	data->uartclk = uart_get_clk_rate(clk);
 	orion_uart->dev.platform_data = data;
 
 	fill_resources(orion_uart, resources, mapbase, 0xff, irq);
@@ -90,10 +122,10 @@ static struct platform_device orion_uart0 = {
 void __init orion_uart0_init(unsigned int membase,
 			     resource_size_t mapbase,
 			     unsigned int irq,
-			     unsigned int uartclk)
+			     struct clk *clk)
 {
 	uart_complete(&orion_uart0, orion_uart0_data, orion_uart0_resources,
-		      membase, mapbase, irq, uartclk);
+		      membase, mapbase, irq, clk);
 }
 
 /*****************************************************************************
@@ -118,10 +150,10 @@ static struct platform_device orion_uart1 = {
 void __init orion_uart1_init(unsigned int membase,
 			     resource_size_t mapbase,
 			     unsigned int irq,
-			     unsigned int uartclk)
+			     struct clk *clk)
 {
 	uart_complete(&orion_uart1, orion_uart1_data, orion_uart1_resources,
-		      membase, mapbase, irq, uartclk);
+		      membase, mapbase, irq, clk);
 }
 
 /*****************************************************************************
@@ -146,10 +178,10 @@ static struct platform_device orion_uart2 = {
 void __init orion_uart2_init(unsigned int membase,
 			     resource_size_t mapbase,
 			     unsigned int irq,
-			     unsigned int uartclk)
+			     struct clk *clk)
 {
 	uart_complete(&orion_uart2, orion_uart2_data, orion_uart2_resources,
-		      membase, mapbase, irq, uartclk);
+		      membase, mapbase, irq, clk);
 }
 
 /*****************************************************************************
@@ -174,10 +206,10 @@ static struct platform_device orion_uart3 = {
 void __init orion_uart3_init(unsigned int membase,
 			     resource_size_t mapbase,
 			     unsigned int irq,
-			     unsigned int uartclk)
+			     struct clk *clk)
 {
 	uart_complete(&orion_uart3, orion_uart3_data, orion_uart3_resources,
-		      membase, mapbase, irq, uartclk);
+		      membase, mapbase, irq, clk);
 }
 
 /*****************************************************************************
@@ -203,13 +235,11 @@ void __init orion_rtc_init(unsigned long mapbase,
  ****************************************************************************/
 static __init void ge_complete(
 	struct mv643xx_eth_shared_platform_data *orion_ge_shared_data,
-	int tclk,
 	struct resource *orion_ge_resource, unsigned long irq,
 	struct platform_device *orion_ge_shared,
 	struct mv643xx_eth_platform_data *eth_data,
 	struct platform_device *orion_ge)
 {
-	orion_ge_shared_data->t_clk = tclk;
 	orion_ge_resource->start = irq;
 	orion_ge_resource->end = irq;
 	eth_data->shared = orion_ge_shared;
@@ -260,12 +290,11 @@ static struct platform_device orion_ge00 = {
 void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,
 			    unsigned long irq,
-			    unsigned long irq_err,
-			    int tclk)
+			    unsigned long irq_err)
 {
 	fill_resources(&orion_ge00_shared, orion_ge00_shared_resources,
 		       mapbase + 0x2000, SZ_16K - 1, irq_err);
-	ge_complete(&orion_ge00_shared_data, tclk,
+	ge_complete(&orion_ge00_shared_data,
 		    orion_ge00_resources, irq, &orion_ge00_shared,
 		    eth_data, &orion_ge00);
 }
@@ -313,12 +342,11 @@ static struct platform_device orion_ge01 = {
 void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,
 			    unsigned long irq,
-			    unsigned long irq_err,
-			    int tclk)
+			    unsigned long irq_err)
 {
 	fill_resources(&orion_ge01_shared, orion_ge01_shared_resources,
 		       mapbase + 0x2000, SZ_16K - 1, irq_err);
-	ge_complete(&orion_ge01_shared_data, tclk,
+	ge_complete(&orion_ge01_shared_data,
 		    orion_ge01_resources, irq, &orion_ge01_shared,
 		    eth_data, &orion_ge01);
 }
@@ -366,12 +394,11 @@ static struct platform_device orion_ge10 = {
 void __init orion_ge10_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,
 			    unsigned long irq,
-			    unsigned long irq_err,
-			    int tclk)
+			    unsigned long irq_err)
 {
 	fill_resources(&orion_ge10_shared, orion_ge10_shared_resources,
 		       mapbase + 0x2000, SZ_16K - 1, irq_err);
-	ge_complete(&orion_ge10_shared_data, tclk,
+	ge_complete(&orion_ge10_shared_data,
 		    orion_ge10_resources, irq, &orion_ge10_shared,
 		    eth_data, &orion_ge10);
 }
@@ -419,12 +446,11 @@ static struct platform_device orion_ge11 = {
 void __init orion_ge11_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,
 			    unsigned long irq,
-			    unsigned long irq_err,
-			    int tclk)
+			    unsigned long irq_err)
 {
 	fill_resources(&orion_ge11_shared, orion_ge11_shared_resources,
 		       mapbase + 0x2000, SZ_16K - 1, irq_err);
-	ge_complete(&orion_ge11_shared_data, tclk,
+	ge_complete(&orion_ge11_shared_data,
 		    orion_ge11_resources, irq, &orion_ge11_shared,
 		    eth_data, &orion_ge11);
 }
@@ -521,44 +547,32 @@ void __init orion_i2c_1_init(unsigned long mapbase,
 /*****************************************************************************
  * SPI
  ****************************************************************************/
-static struct orion_spi_info orion_spi_plat_data;
 static struct resource orion_spi_resources;
 
 static struct platform_device orion_spi = {
 	.name		= "orion_spi",
 	.id		= 0,
-	.dev		= {
-		.platform_data	= &orion_spi_plat_data,
-	},
 };
 
-static struct orion_spi_info orion_spi_1_plat_data;
 static struct resource orion_spi_1_resources;
 
 static struct platform_device orion_spi_1 = {
 	.name		= "orion_spi",
 	.id		= 1,
-	.dev		= {
-		.platform_data	= &orion_spi_1_plat_data,
-	},
 };
 
 /* Note: The SPI silicon core does have interrupts. However the
  * current Linux software driver does not use interrupts. */
 
-void __init orion_spi_init(unsigned long mapbase,
-			   unsigned long tclk)
+void __init orion_spi_init(unsigned long mapbase)
 {
-	orion_spi_plat_data.tclk = tclk;
 	fill_resources(&orion_spi, &orion_spi_resources,
 		       mapbase, SZ_512 - 1, NO_IRQ);
 	platform_device_register(&orion_spi);
 }
 
-void __init orion_spi_1_init(unsigned long mapbase,
-			     unsigned long tclk)
+void __init orion_spi_1_init(unsigned long mapbase)
 {
-	orion_spi_1_plat_data.tclk = tclk;
 	fill_resources(&orion_spi_1, &orion_spi_1_resources,
 		       mapbase, SZ_512 - 1, NO_IRQ);
 	platform_device_register(&orion_spi_1);
@@ -567,24 +581,18 @@ void __init orion_spi_1_init(unsigned long mapbase,
 /*****************************************************************************
  * Watchdog
  ****************************************************************************/
-static struct orion_wdt_platform_data orion_wdt_data;
-
 static struct resource orion_wdt_resource =
 		DEFINE_RES_MEM(TIMER_VIRT_BASE, 0x28);
 
 static struct platform_device orion_wdt_device = {
 	.name		= "orion_wdt",
 	.id		= -1,
-	.dev		= {
-		.platform_data	= &orion_wdt_data,
-	},
-	.resource	= &orion_wdt_resource,
 	.num_resources	= 1,
+	.resource	= &orion_wdt_resource,
 };
 
-void __init orion_wdt_init(unsigned long tclk)
+void __init orion_wdt_init(void)
 {
-	orion_wdt_data.tclk = tclk;
 	platform_device_register(&orion_wdt_device);
 }
 
diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c
index 10d160888133..af95af257301 100644
--- a/arch/arm/plat-orion/gpio.c
+++ b/arch/arm/plat-orion/gpio.c
@@ -16,6 +16,7 @@
 #include <linux/bitops.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
+#include <linux/leds.h>
 
 /*
  * GPIO unit register offsets.
@@ -289,12 +290,34 @@ void orion_gpio_set_blink(unsigned pin, int blink)
 		return;
 
 	spin_lock_irqsave(&ochip->lock, flags);
-	__set_level(ochip, pin, 0);
-	__set_blinking(ochip, pin, blink);
+	__set_level(ochip, pin & 31, 0);
+	__set_blinking(ochip, pin & 31, blink);
 	spin_unlock_irqrestore(&ochip->lock, flags);
 }
 EXPORT_SYMBOL(orion_gpio_set_blink);
 
+#define ORION_BLINK_HALF_PERIOD 100 /* ms */
+
+int orion_gpio_led_blink_set(unsigned gpio, int state,
+	unsigned long *delay_on, unsigned long *delay_off)
+{
+
+	if (delay_on && delay_off && !*delay_on && !*delay_off)
+		*delay_on = *delay_off = ORION_BLINK_HALF_PERIOD;
+
+	switch (state) {
+	case GPIO_LED_NO_BLINK_LOW:
+	case GPIO_LED_NO_BLINK_HIGH:
+		orion_gpio_set_blink(gpio, 0);
+		gpio_set_value(gpio, state);
+		break;
+	case GPIO_LED_BLINK:
+		orion_gpio_set_blink(gpio, 1);
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(orion_gpio_led_blink_set);
+
 
 /*****************************************************************************
  * Orion GPIO IRQ
diff --git a/arch/arm/plat-orion/include/plat/common.h b/arch/arm/plat-orion/include/plat/common.h
index a7fa005a5a0e..e00fdb213609 100644
--- a/arch/arm/plat-orion/include/plat/common.h
+++ b/arch/arm/plat-orion/include/plat/common.h
@@ -16,22 +16,22 @@ struct dsa_platform_data;
 void __init orion_uart0_init(unsigned int membase,
 			     resource_size_t mapbase,
 			     unsigned int irq,
-			     unsigned int uartclk);
+			     struct clk *clk);
 
 void __init orion_uart1_init(unsigned int membase,
 			     resource_size_t mapbase,
 			     unsigned int irq,
-			     unsigned int uartclk);
+			     struct clk *clk);
 
 void __init orion_uart2_init(unsigned int membase,
 			     resource_size_t mapbase,
 			     unsigned int irq,
-			     unsigned int uartclk);
+			     struct clk *clk);
 
 void __init orion_uart3_init(unsigned int membase,
 			     resource_size_t mapbase,
 			     unsigned int irq,
-			     unsigned int uartclk);
+			     struct clk *clk);
 
 void __init orion_rtc_init(unsigned long mapbase,
 			   unsigned long irq);
@@ -39,29 +39,26 @@ void __init orion_rtc_init(unsigned long mapbase,
 void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,
 			    unsigned long irq,
-			    unsigned long irq_err,
-			    int tclk);
+			    unsigned long irq_err);
 
 void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,
 			    unsigned long irq,
-			    unsigned long irq_err,
-			    int tclk);
+			    unsigned long irq_err);
 
 void __init orion_ge10_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,
 			    unsigned long irq,
-			    unsigned long irq_err,
-			    int tclk);
+			    unsigned long irq_err);
 
 void __init orion_ge11_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,
 			    unsigned long irq,
-			    unsigned long irq_err,
-			    int tclk);
+			    unsigned long irq_err);
 
 void __init orion_ge00_switch_init(struct dsa_platform_data *d,
 				   int irq);
+
 void __init orion_i2c_init(unsigned long mapbase,
 			   unsigned long irq,
 			   unsigned long freq_m);
@@ -70,13 +67,11 @@ void __init orion_i2c_1_init(unsigned long mapbase,
 			     unsigned long irq,
 			     unsigned long freq_m);
 
-void __init orion_spi_init(unsigned long mapbase,
-			   unsigned long tclk);
+void __init orion_spi_init(unsigned long mapbase);
 
-void __init orion_spi_1_init(unsigned long mapbase,
-			     unsigned long tclk);
+void __init orion_spi_1_init(unsigned long mapbase);
 
-void __init orion_wdt_init(unsigned long tclk);
+void __init orion_wdt_init(void);
 
 void __init orion_xor0_init(unsigned long mapbase_low,
 			    unsigned long mapbase_high,
@@ -106,4 +101,9 @@ void __init orion_crypto_init(unsigned long mapbase,
 			      unsigned long srambase,
 			      unsigned long sram_size,
 			      unsigned long irq);
+
+void __init orion_clkdev_add(const char *con_id, const char *dev_id,
+			     struct clk *clk);
+
+void __init orion_clkdev_init(struct clk *tclk);
 #endif
diff --git a/arch/arm/plat-orion/include/plat/gpio.h b/arch/arm/plat-orion/include/plat/gpio.h
index 3abf30428bee..bec0c98ce41f 100644
--- a/arch/arm/plat-orion/include/plat/gpio.h
+++ b/arch/arm/plat-orion/include/plat/gpio.h
@@ -19,6 +19,8 @@
  */
 void orion_gpio_set_unused(unsigned pin);
 void orion_gpio_set_blink(unsigned pin, int blink);
+int orion_gpio_led_blink_set(unsigned gpio, int state,
+	unsigned long *delay_on, unsigned long *delay_off);
 
 #define GPIO_INPUT_OK		(1 << 0)
 #define GPIO_OUTPUT_OK		(1 << 1)
diff --git a/arch/arm/plat-orion/include/plat/orion_wdt.h b/arch/arm/plat-orion/include/plat/orion_wdt.h
deleted file mode 100644
index 665c362a2fba..000000000000
--- a/arch/arm/plat-orion/include/plat/orion_wdt.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * arch/arm/plat-orion/include/plat/orion_wdt.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_ORION_WDT_H
-#define __PLAT_ORION_WDT_H
-
-struct orion_wdt_platform_data {
-	u32	tclk;		/* no <linux/clk.h> support yet */
-};
-
-
-#endif
-
diff --git a/arch/arm/plat-orion/pcie.c b/arch/arm/plat-orion/pcie.c
index 86dbb5bdb172..f20a321088a2 100644
--- a/arch/arm/plat-orion/pcie.c
+++ b/arch/arm/plat-orion/pcie.c
@@ -52,12 +52,12 @@
 #define  PCIE_DEBUG_SOFT_RESET		(1<<20)
 
 
-u32 __init orion_pcie_dev_id(void __iomem *base)
+u32 orion_pcie_dev_id(void __iomem *base)
 {
 	return readl(base + PCIE_DEV_ID_OFF) >> 16;
 }
 
-u32 __init orion_pcie_rev(void __iomem *base)
+u32 orion_pcie_rev(void __iomem *base)
 {
 	return readl(base + PCIE_DEV_REV_OFF) & 0xff;
 }
diff --git a/arch/arm/plat-pxa/include/plat/pxa27x_keypad.h b/arch/arm/plat-pxa/include/plat/pxa27x_keypad.h
index abcc36eb1242..5ce8d5e6ea51 100644
--- a/arch/arm/plat-pxa/include/plat/pxa27x_keypad.h
+++ b/arch/arm/plat-pxa/include/plat/pxa27x_keypad.h
@@ -44,6 +44,10 @@ struct pxa27x_keypad_platform_data {
 	/* direct keys */
 	int		direct_key_num;
 	unsigned int	direct_key_map[MAX_DIRECT_KEY_NUM];
+	/* the key output may be low active */
+	int		direct_key_low_active;
+	/* give board a chance to choose the start direct key */
+	unsigned int	direct_key_mask;
 
 	/* rotary encoders 0 */
 	int		enable_rotary0;
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 2467b800cc76..9f60549c8da1 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -12,10 +12,7 @@ obj-				:=
 
 # Core files
 
-obj-y				+= cpu.o
 obj-y				+= irq.o
-obj-y				+= dev-uart.o
-obj-y				+= clock.o
 obj-$(CONFIG_S3C24XX_DCLK)	+= clock-dclk.o
 
 obj-$(CONFIG_CPU_FREQ_S3C24XX)	+= cpu-freq.o
@@ -23,9 +20,6 @@ obj-$(CONFIG_CPU_FREQ_S3C24XX_DEBUGFS) += cpu-freq-debugfs.o
 
 # Architecture dependent builds
 
-obj-$(CONFIG_PM)		+= pm.o
-obj-$(CONFIG_PM)		+= irq-pm.o
-obj-$(CONFIG_PM)		+= sleep.o
 obj-$(CONFIG_S3C2410_CLOCK)	+= s3c2410-clock.o
 obj-$(CONFIG_S3C24XX_DMA)	+= dma.o
 obj-$(CONFIG_S3C2410_IOTIMING)	+= s3c2410-iotiming.o
diff --git a/arch/arm/plat-s3c24xx/clock.c b/arch/arm/plat-s3c24xx/clock.c
deleted file mode 100644
index 931d26d1a54b..000000000000
--- a/arch/arm/plat-s3c24xx/clock.c
+++ /dev/null
@@ -1,59 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/clock.c
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX Core clock control support
- *
- * Based on, and code from linux/arch/arm/mach-versatile/clock.c
- **
- **  Copyright (C) 2004 ARM Limited.
- **  Written by Deep Blue Solutions Limited.
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/cpu-freq.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-
-/* initialise all the clocks */
-
-void __init_or_cpufreq s3c24xx_setup_clocks(unsigned long fclk,
-					   unsigned long hclk,
-					   unsigned long pclk)
-{
-	clk_upll.rate = s3c24xx_get_pll(__raw_readl(S3C2410_UPLLCON),
-					clk_xtal.rate);
-
-	clk_mpll.rate = fclk;
-	clk_h.rate = hclk;
-	clk_p.rate = pclk;
-	clk_f.rate = fclk;
-}
diff --git a/arch/arm/plat-s3c24xx/dev-uart.c b/arch/arm/plat-s3c24xx/dev-uart.c
deleted file mode 100644
index 9ab22e662fff..000000000000
--- a/arch/arm/plat-s3c24xx/dev-uart.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/dev-uart.c
- *
- * Copyright (c) 2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Base S3C24XX UART resource and platform device definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <plat/devs.h>
-#include <plat/regs-serial.h>
-
-/* Serial port registrations */
-
-static struct resource s3c2410_uart0_resource[] = {
-	[0] = {
-		.start = S3C2410_PA_UART0,
-		.end   = S3C2410_PA_UART0 + 0x3fff,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_S3CUART_RX0,
-		.end   = IRQ_S3CUART_ERR0,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static struct resource s3c2410_uart1_resource[] = {
-	[0] = {
-		.start = S3C2410_PA_UART1,
-		.end   = S3C2410_PA_UART1 + 0x3fff,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_S3CUART_RX1,
-		.end   = IRQ_S3CUART_ERR1,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static struct resource s3c2410_uart2_resource[] = {
-	[0] = {
-		.start = S3C2410_PA_UART2,
-		.end   = S3C2410_PA_UART2 + 0x3fff,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_S3CUART_RX2,
-		.end   = IRQ_S3CUART_ERR2,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static struct resource s3c2410_uart3_resource[] = {
-	[0] = {
-		.start = S3C2443_PA_UART3,
-		.end   = S3C2443_PA_UART3 + 0x3fff,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_S3CUART_RX3,
-		.end   = IRQ_S3CUART_ERR3,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct s3c24xx_uart_resources s3c2410_uart_resources[] __initdata = {
-	[0] = {
-		.resources	= s3c2410_uart0_resource,
-		.nr_resources	= ARRAY_SIZE(s3c2410_uart0_resource),
-	},
-	[1] = {
-		.resources	= s3c2410_uart1_resource,
-		.nr_resources	= ARRAY_SIZE(s3c2410_uart1_resource),
-	},
-	[2] = {
-		.resources	= s3c2410_uart2_resource,
-		.nr_resources	= ARRAY_SIZE(s3c2410_uart2_resource),
-	},
-	[3] = {
-		.resources	= s3c2410_uart3_resource,
-		.nr_resources	= ARRAY_SIZE(s3c2410_uart3_resource),
-	},
-};
diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig
deleted file mode 100644
index 96bea3202304..000000000000
--- a/arch/arm/plat-s5p/Kconfig
+++ /dev/null
@@ -1,140 +0,0 @@
-# arch/arm/plat-s5p/Kconfig
-#
-# Copyright (c) 2009 Samsung Electronics Co., Ltd.
-#		http://www.samsung.com/
-#
-# Licensed under GPLv2
-
-config PLAT_S5P
-	bool
-	depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS)
-	default y
-	select ARM_VIC if !ARCH_EXYNOS
-	select ARM_GIC if ARCH_EXYNOS
-	select GIC_NON_BANKED if ARCH_EXYNOS4
-	select NO_IOPORT
-	select ARCH_REQUIRE_GPIOLIB
-	select S3C_GPIO_TRACK
-	select S5P_GPIO_DRVSTR
-	select SAMSUNG_GPIOLIB_4BIT
-	select PLAT_SAMSUNG
-	select SAMSUNG_CLKSRC
-	select SAMSUNG_IRQ_VIC_TIMER
-	help
-	  Base platform code for Samsung's S5P series SoC.
-
-config S5P_EXT_INT
-	bool
-	help
-	  Use the external interrupts (other than GPIO interrupts.)
-	  Note: Do not choose this for S5P6440 and S5P6450.
-
-config S5P_GPIO_INT
-	bool
-	help
-	  Common code for the GPIO interrupts (other than external interrupts.)
-
-config S5P_HRT
-	bool
-	select SAMSUNG_DEV_PWM
-	help
-	  Use the High Resolution timer support
-
-config S5P_DEV_UART
-	def_bool y
-	depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210)
-
-config S5P_PM
-	bool
-	help
-	  Common code for power management support on S5P and newer SoCs
-	  Note: Do not select this for S5P6440 and S5P6450.
-
-comment "System MMU"
-
-config S5P_SYSTEM_MMU
-	bool "S5P SYSTEM MMU"
-	depends on ARCH_EXYNOS4
-	help
-	  Say Y here if you want to enable System MMU
-
-config S5P_SLEEP
-	bool
-	help
-	  Internal config node to apply common S5P sleep management code.
-	  Can be selected by S5P and newer SoCs with similar sleep procedure.
-
-config S5P_DEV_FIMC0
-	bool
-	help
-	  Compile in platform device definitions for FIMC controller 0
-
-config S5P_DEV_FIMC1
-	bool
-	help
-	  Compile in platform device definitions for FIMC controller 1
-
-config S5P_DEV_FIMC2
-	bool
-	help
-	  Compile in platform device definitions for FIMC controller 2
-
-config S5P_DEV_FIMC3
-	bool
-	help
-	  Compile in platform device definitions for FIMC controller 3
-
-config S5P_DEV_JPEG
-	bool
-	help
-	  Compile in platform device definitions for JPEG codec
-
-config S5P_DEV_G2D
-	bool
-	help
-	  Compile in platform device definitions for G2D device
-
-config S5P_DEV_FIMD0
-	bool
-	help
-	  Compile in platform device definitions for FIMD controller 0
-
-config S5P_DEV_I2C_HDMIPHY
-	bool
-	help
-	  Compile in platform device definitions for I2C HDMIPHY controller
-
-config S5P_DEV_MFC
-	bool
-	help
-	  Compile in platform device definitions for MFC
-
-config S5P_DEV_ONENAND
-	bool
-	help
-	  Compile in platform device definition for OneNAND controller
-
-config S5P_DEV_CSIS0
-	bool
-	help
-	  Compile in platform device definitions for MIPI-CSIS channel 0
-
-config S5P_DEV_CSIS1
-	bool
-	help
-	  Compile in platform device definitions for MIPI-CSIS channel 1
-
-config S5P_DEV_TV
-	bool
-	help
-	  Compile in platform device definition for TV interface
-
-config S5P_DEV_USB_EHCI
-	bool
-	help
-	  Compile in platform device definition for USB EHCI
-
-config S5P_SETUP_MIPIPHY
-	bool
-	help
-	  Compile in common setup code for MIPI-CSIS and MIPI-DSIM devices
diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile
deleted file mode 100644
index 4bd824136659..000000000000
--- a/arch/arm/plat-s5p/Makefile
+++ /dev/null
@@ -1,28 +0,0 @@
-# arch/arm/plat-s5p/Makefile
-#
-# Copyright (c) 2009 Samsung Electronics Co., Ltd.
-# 		http://www.samsung.com/
-#
-# Licensed under GPLv2
-
-obj-y				:=
-obj-m				:=
-obj-n				:= dummy.o
-obj-				:=
-
-# Core files
-
-obj-y				+= clock.o
-obj-y				+= irq.o
-obj-$(CONFIG_S5P_EXT_INT)	+= irq-eint.o
-obj-$(CONFIG_S5P_GPIO_INT)	+= irq-gpioint.o
-obj-$(CONFIG_S5P_SYSTEM_MMU)	+= sysmmu.o
-obj-$(CONFIG_S5P_PM)		+= pm.o irq-pm.o
-obj-$(CONFIG_S5P_SLEEP)		+= sleep.o
-obj-$(CONFIG_S5P_HRT) 		+= s5p-time.o
-
-# devices
-
-obj-$(CONFIG_S5P_DEV_UART)	+= dev-uart.o
-obj-$(CONFIG_S5P_DEV_MFC)	+= dev-mfc.o
-obj-$(CONFIG_S5P_SETUP_MIPIPHY)	+= setup-mipiphy.o
diff --git a/arch/arm/plat-s5p/sysmmu.c b/arch/arm/plat-s5p/sysmmu.c
deleted file mode 100644
index c8bec9c7655d..000000000000
--- a/arch/arm/plat-s5p/sysmmu.c
+++ /dev/null
@@ -1,313 +0,0 @@
-/* linux/arch/arm/plat-s5p/sysmmu.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/export.h>
-
-#include <asm/pgtable.h>
-
-#include <mach/map.h>
-#include <mach/regs-sysmmu.h>
-#include <plat/sysmmu.h>
-
-#define CTRL_ENABLE	0x5
-#define CTRL_BLOCK	0x7
-#define CTRL_DISABLE	0x0
-
-static struct device *dev;
-
-static unsigned short fault_reg_offset[SYSMMU_FAULTS_NUM] = {
-	S5P_PAGE_FAULT_ADDR,
-	S5P_AR_FAULT_ADDR,
-	S5P_AW_FAULT_ADDR,
-	S5P_DEFAULT_SLAVE_ADDR,
-	S5P_AR_FAULT_ADDR,
-	S5P_AR_FAULT_ADDR,
-	S5P_AW_FAULT_ADDR,
-	S5P_AW_FAULT_ADDR
-};
-
-static char *sysmmu_fault_name[SYSMMU_FAULTS_NUM] = {
-	"PAGE FAULT",
-	"AR MULTI-HIT FAULT",
-	"AW MULTI-HIT FAULT",
-	"BUS ERROR",
-	"AR SECURITY PROTECTION FAULT",
-	"AR ACCESS PROTECTION FAULT",
-	"AW SECURITY PROTECTION FAULT",
-	"AW ACCESS PROTECTION FAULT"
-};
-
-static int (*fault_handlers[S5P_SYSMMU_TOTAL_IPNUM])(
-		enum S5P_SYSMMU_INTERRUPT_TYPE itype,
-		unsigned long pgtable_base,
-		unsigned long fault_addr);
-
-/*
- * If adjacent 2 bits are true, the system MMU is enabled.
- * The system MMU is disabled, otherwise.
- */
-static unsigned long sysmmu_states;
-
-static inline void set_sysmmu_active(sysmmu_ips ips)
-{
-	sysmmu_states |= 3 << (ips * 2);
-}
-
-static inline void set_sysmmu_inactive(sysmmu_ips ips)
-{
-	sysmmu_states &= ~(3 << (ips * 2));
-}
-
-static inline int is_sysmmu_active(sysmmu_ips ips)
-{
-	return sysmmu_states & (3 << (ips * 2));
-}
-
-static void __iomem *sysmmusfrs[S5P_SYSMMU_TOTAL_IPNUM];
-
-static inline void sysmmu_block(sysmmu_ips ips)
-{
-	__raw_writel(CTRL_BLOCK, sysmmusfrs[ips] + S5P_MMU_CTRL);
-	dev_dbg(dev, "%s is blocked.\n", sysmmu_ips_name[ips]);
-}
-
-static inline void sysmmu_unblock(sysmmu_ips ips)
-{
-	__raw_writel(CTRL_ENABLE, sysmmusfrs[ips] + S5P_MMU_CTRL);
-	dev_dbg(dev, "%s is unblocked.\n", sysmmu_ips_name[ips]);
-}
-
-static inline void __sysmmu_tlb_invalidate(sysmmu_ips ips)
-{
-	__raw_writel(0x1, sysmmusfrs[ips] + S5P_MMU_FLUSH);
-	dev_dbg(dev, "TLB of %s is invalidated.\n", sysmmu_ips_name[ips]);
-}
-
-static inline void __sysmmu_set_ptbase(sysmmu_ips ips, unsigned long pgd)
-{
-	if (unlikely(pgd == 0)) {
-		pgd = (unsigned long)ZERO_PAGE(0);
-		__raw_writel(0x20, sysmmusfrs[ips] + S5P_MMU_CFG); /* 4KB LV1 */
-	} else {
-		__raw_writel(0x0, sysmmusfrs[ips] + S5P_MMU_CFG); /* 16KB LV1 */
-	}
-
-	__raw_writel(pgd, sysmmusfrs[ips] + S5P_PT_BASE_ADDR);
-
-	dev_dbg(dev, "Page table base of %s is initialized with 0x%08lX.\n",
-						sysmmu_ips_name[ips], pgd);
-	__sysmmu_tlb_invalidate(ips);
-}
-
-void sysmmu_set_fault_handler(sysmmu_ips ips,
-			int (*handler)(enum S5P_SYSMMU_INTERRUPT_TYPE itype,
-					unsigned long pgtable_base,
-					unsigned long fault_addr))
-{
-	BUG_ON(!((ips >= SYSMMU_MDMA) && (ips < S5P_SYSMMU_TOTAL_IPNUM)));
-	fault_handlers[ips] = handler;
-}
-
-static irqreturn_t s5p_sysmmu_irq(int irq, void *dev_id)
-{
-	/* SYSMMU is in blocked when interrupt occurred. */
-	unsigned long base = 0;
-	sysmmu_ips ips = (sysmmu_ips)dev_id;
-	enum S5P_SYSMMU_INTERRUPT_TYPE itype;
-
-	itype = (enum S5P_SYSMMU_INTERRUPT_TYPE)
-		__ffs(__raw_readl(sysmmusfrs[ips] + S5P_INT_STATUS));
-
-	BUG_ON(!((itype >= 0) && (itype < 8)));
-
-	dev_alert(dev, "%s occurred by %s.\n", sysmmu_fault_name[itype],
-							sysmmu_ips_name[ips]);
-
-	if (fault_handlers[ips]) {
-		unsigned long addr;
-
-		base = __raw_readl(sysmmusfrs[ips] + S5P_PT_BASE_ADDR);
-		addr = __raw_readl(sysmmusfrs[ips] + fault_reg_offset[itype]);
-
-		if (fault_handlers[ips](itype, base, addr)) {
-			__raw_writel(1 << itype,
-					sysmmusfrs[ips] + S5P_INT_CLEAR);
-			dev_notice(dev, "%s from %s is resolved."
-					" Retrying translation.\n",
-				sysmmu_fault_name[itype], sysmmu_ips_name[ips]);
-		} else {
-			base = 0;
-		}
-	}
-
-	sysmmu_unblock(ips);
-
-	if (!base)
-		dev_notice(dev, "%s from %s is not handled.\n",
-			sysmmu_fault_name[itype], sysmmu_ips_name[ips]);
-
-	return IRQ_HANDLED;
-}
-
-void s5p_sysmmu_set_tablebase_pgd(sysmmu_ips ips, unsigned long pgd)
-{
-	if (is_sysmmu_active(ips)) {
-		sysmmu_block(ips);
-		__sysmmu_set_ptbase(ips, pgd);
-		sysmmu_unblock(ips);
-	} else {
-		dev_dbg(dev, "%s is disabled. "
-			"Skipping initializing page table base.\n",
-						sysmmu_ips_name[ips]);
-	}
-}
-
-void s5p_sysmmu_enable(sysmmu_ips ips, unsigned long pgd)
-{
-	if (!is_sysmmu_active(ips)) {
-		sysmmu_clk_enable(ips);
-
-		__sysmmu_set_ptbase(ips, pgd);
-
-		__raw_writel(CTRL_ENABLE, sysmmusfrs[ips] + S5P_MMU_CTRL);
-
-		set_sysmmu_active(ips);
-		dev_dbg(dev, "%s is enabled.\n", sysmmu_ips_name[ips]);
-	} else {
-		dev_dbg(dev, "%s is already enabled.\n", sysmmu_ips_name[ips]);
-	}
-}
-
-void s5p_sysmmu_disable(sysmmu_ips ips)
-{
-	if (is_sysmmu_active(ips)) {
-		__raw_writel(CTRL_DISABLE, sysmmusfrs[ips] + S5P_MMU_CTRL);
-		set_sysmmu_inactive(ips);
-		sysmmu_clk_disable(ips);
-		dev_dbg(dev, "%s is disabled.\n", sysmmu_ips_name[ips]);
-	} else {
-		dev_dbg(dev, "%s is already disabled.\n", sysmmu_ips_name[ips]);
-	}
-}
-
-void s5p_sysmmu_tlb_invalidate(sysmmu_ips ips)
-{
-	if (is_sysmmu_active(ips)) {
-		sysmmu_block(ips);
-		__sysmmu_tlb_invalidate(ips);
-		sysmmu_unblock(ips);
-	} else {
-		dev_dbg(dev, "%s is disabled. "
-			"Skipping invalidating TLB.\n", sysmmu_ips_name[ips]);
-	}
-}
-
-static int s5p_sysmmu_probe(struct platform_device *pdev)
-{
-	int i, ret;
-	struct resource *res, *mem;
-
-	dev = &pdev->dev;
-
-	for (i = 0; i < S5P_SYSMMU_TOTAL_IPNUM; i++) {
-		int irq;
-
-		sysmmu_clk_init(dev, i);
-		sysmmu_clk_disable(i);
-
-		res = platform_get_resource(pdev, IORESOURCE_MEM, i);
-		if (!res) {
-			dev_err(dev, "Failed to get the resource of %s.\n",
-							sysmmu_ips_name[i]);
-			ret = -ENODEV;
-			goto err_res;
-		}
-
-		mem = request_mem_region(res->start, resource_size(res),
-					 pdev->name);
-		if (!mem) {
-			dev_err(dev, "Failed to request the memory region of %s.\n",
-							sysmmu_ips_name[i]);
-			ret = -EBUSY;
-			goto err_res;
-		}
-
-		sysmmusfrs[i] = ioremap(res->start, resource_size(res));
-		if (!sysmmusfrs[i]) {
-			dev_err(dev, "Failed to ioremap() for %s.\n",
-							sysmmu_ips_name[i]);
-			ret = -ENXIO;
-			goto err_reg;
-		}
-
-		irq = platform_get_irq(pdev, i);
-		if (irq <= 0) {
-			dev_err(dev, "Failed to get the IRQ resource of %s.\n",
-							sysmmu_ips_name[i]);
-			ret = -ENOENT;
-			goto err_map;
-		}
-
-		if (request_irq(irq, s5p_sysmmu_irq, IRQF_DISABLED,
-						pdev->name, (void *)i)) {
-			dev_err(dev, "Failed to request IRQ for %s.\n",
-							sysmmu_ips_name[i]);
-			ret = -ENOENT;
-			goto err_map;
-		}
-	}
-
-	return 0;
-
-err_map:
-	iounmap(sysmmusfrs[i]);
-err_reg:
-	release_mem_region(mem->start, resource_size(mem));
-err_res:
-	return ret;
-}
-
-static int s5p_sysmmu_remove(struct platform_device *pdev)
-{
-	return 0;
-}
-int s5p_sysmmu_runtime_suspend(struct device *dev)
-{
-	return 0;
-}
-
-int s5p_sysmmu_runtime_resume(struct device *dev)
-{
-	return 0;
-}
-
-const struct dev_pm_ops s5p_sysmmu_pm_ops = {
-	.runtime_suspend	= s5p_sysmmu_runtime_suspend,
-	.runtime_resume		= s5p_sysmmu_runtime_resume,
-};
-
-static struct platform_driver s5p_sysmmu_driver = {
-	.probe		= s5p_sysmmu_probe,
-	.remove		= s5p_sysmmu_remove,
-	.driver		= {
-		.owner		= THIS_MODULE,
-		.name		= "s5p-sysmmu",
-		.pm		= &s5p_sysmmu_pm_ops,
-	}
-};
-
-static int __init s5p_sysmmu_init(void)
-{
-	return platform_driver_register(&s5p_sysmmu_driver);
-}
-arch_initcall(s5p_sysmmu_init);
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 71553f410016..a2fae4ea0936 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -13,6 +13,24 @@ config PLAT_SAMSUNG
 	help
 	  Base platform code for all Samsung SoC based systems
 
+config PLAT_S5P
+	bool
+	depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS)
+	default y
+	select ARM_VIC if !ARCH_EXYNOS
+	select ARM_GIC if ARCH_EXYNOS
+	select GIC_NON_BANKED if ARCH_EXYNOS4
+	select NO_IOPORT
+	select ARCH_REQUIRE_GPIOLIB
+	select S3C_GPIO_TRACK
+	select S5P_GPIO_DRVSTR
+	select SAMSUNG_GPIOLIB_4BIT
+	select PLAT_SAMSUNG
+	select SAMSUNG_CLKSRC
+	select SAMSUNG_IRQ_VIC_TIMER
+	help
+	  Base platform code for Samsung's S5P series SoC.
+
 if PLAT_SAMSUNG
 
 # boot configurations
@@ -50,6 +68,14 @@ config S3C_LOWLEVEL_UART_PORT
 	  this configuration should be between zero and two. The port
 	  must have been initialised by the boot-loader before use.
 
+# timer options
+
+config S5P_HRT
+	bool
+	select SAMSUNG_DEV_PWM
+	help
+	  Use the High Resolution timer support
+
 # clock options
 
 config SAMSUNG_CLKSRC
@@ -58,6 +84,11 @@ config SAMSUNG_CLKSRC
 	  Select the clock code for the clksrc implementation
 	  used by newer systems such as the S3C64XX.
 
+config S5P_CLOCK
+	def_bool (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS)
+	help
+	  Support common clock part for ARCH_S5P and ARCH_EXYNOS SoCs
+
 # options for IRQ support
 
 config SAMSUNG_IRQ_VIC_TIMER
@@ -65,6 +96,22 @@ config SAMSUNG_IRQ_VIC_TIMER
        help
          Internal configuration to build the VIC timer interrupt code.
 
+config S5P_IRQ
+	def_bool (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS)
+	help
+	  Support common interrup part for ARCH_S5P and ARCH_EXYNOS SoCs
+
+config S5P_EXT_INT
+	bool
+	help
+	  Use the external interrupts (other than GPIO interrupts.)
+	  Note: Do not choose this for S5P6440 and S5P6450.
+
+config S5P_GPIO_INT
+	bool
+	help
+	  Common code for the GPIO interrupts (other than external interrupts.)
+
 # options for gpio configuration support
 
 config SAMSUNG_GPIOLIB_4BIT
@@ -117,6 +164,12 @@ config S3C_GPIO_TRACK
 	  Internal configuration option to enable the s3c specific gpio
 	  chip tracking if the platform requires it.
 
+# uart options
+
+config S5P_DEV_UART
+	def_bool y
+	depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210)
+
 # ADC driver
 
 config S3C_ADC
@@ -274,6 +327,76 @@ config SAMSUNG_DEV_BACKLIGHT
 	help
 	  Compile in platform device definition LCD backlight with PWM Timer
 
+config S5P_DEV_CSIS0
+	bool
+	help
+	  Compile in platform device definitions for MIPI-CSIS channel 0
+
+config S5P_DEV_CSIS1
+	bool
+	help
+	  Compile in platform device definitions for MIPI-CSIS channel 1
+
+config S5P_DEV_FIMC0
+	bool
+	help
+	  Compile in platform device definitions for FIMC controller 0
+
+config S5P_DEV_FIMC1
+	bool
+	help
+	  Compile in platform device definitions for FIMC controller 1
+
+config S5P_DEV_FIMC2
+	bool
+	help
+	  Compile in platform device definitions for FIMC controller 2
+
+config S5P_DEV_FIMC3
+	bool
+	help
+	  Compile in platform device definitions for FIMC controller 3
+
+config S5P_DEV_FIMD0
+	bool
+	help
+	  Compile in platform device definitions for FIMD controller 0
+
+config S5P_DEV_G2D
+	bool
+	help
+	  Compile in platform device definitions for G2D device
+
+config S5P_DEV_I2C_HDMIPHY
+	bool
+	help
+	  Compile in platform device definitions for I2C HDMIPHY controller
+
+config S5P_DEV_JPEG
+	bool
+	help
+	  Compile in platform device definitions for JPEG codec
+
+config S5P_DEV_MFC
+	bool
+	help
+	  Compile in setup memory (init) code for MFC
+
+config S5P_DEV_ONENAND
+	bool
+	help
+	  Compile in platform device definition for OneNAND controller
+
+config S5P_DEV_TV
+	bool
+	help
+	  Compile in platform device definition for TV interface
+
+config S5P_DEV_USB_EHCI
+	bool
+	help
+	  Compile in platform device definition for USB EHCI
+
 config S3C24XX_PWM
 	bool "PWM device support"
 	select HAVE_PWM
@@ -281,6 +404,11 @@ config S3C24XX_PWM
 	  Support for exporting the PWM timer blocks via the pwm device
 	  system
 
+config S5P_SETUP_MIPIPHY
+	bool
+	help
+	  Compile in common setup code for MIPI-CSIS and MIPI-DSIM devices
+
 # DMA
 
 config S3C_DMA
@@ -291,7 +419,7 @@ config S3C_DMA
 config SAMSUNG_DMADEV
 	bool
 	select DMADEVICES
-	select PL330_DMA if (CPU_EXYNOS4210 || CPU_S5PV210 || CPU_S5PC100 || \
+	select PL330_DMA if (ARCH_EXYNOS5 || ARCH_EXYNOS4 || CPU_S5PV210 || CPU_S5PC100 || \
 					CPU_S5P6450 || CPU_S5P6440)
 	select ARM_AMBA
 	help
@@ -302,6 +430,7 @@ comment "Power management"
 config SAMSUNG_PM_DEBUG
 	bool "S3C2410 PM Suspend debug"
 	depends on PM
+	select DEBUG_LL
 	help
 	  Say Y here if you want verbose debugging from the PM Suspend and
 	  Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
@@ -350,6 +479,18 @@ config SAMSUNG_WAKEMASK
 	  and above. This code allows a set of interrupt to wakeup-mask
 	  mappings. See <plat/wakeup-mask.h>
 
+config S5P_PM
+	bool
+	help
+	  Common code for power management support on S5P and newer SoCs
+	  Note: Do not select this for S5P6440 and S5P6450.
+
+config S5P_SLEEP
+	bool
+	help
+	  Internal config node to apply common S5P sleep management code.
+	  Can be selected by S5P and newer SoCs with similar sleep procedure.
+
 comment "Power Domain"
 
 config SAMSUNG_PD
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index 6012366f33cb..860b2db4db15 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -13,12 +13,18 @@ obj-				:=
 
 obj-y				+= init.o cpu.o
 obj-$(CONFIG_ARCH_USES_GETTIMEOFFSET)   += time.o
+obj-$(CONFIG_S5P_HRT) 		+= s5p-time.o
+
 obj-y				+= clock.o
 obj-y				+= pwm-clock.o
 
 obj-$(CONFIG_SAMSUNG_CLKSRC)	+= clock-clksrc.o
+obj-$(CONFIG_S5P_CLOCK)		+= s5p-clock.o
 
 obj-$(CONFIG_SAMSUNG_IRQ_VIC_TIMER) += irq-vic-timer.o
+obj-$(CONFIG_S5P_IRQ)		+= s5p-irq.o
+obj-$(CONFIG_S5P_EXT_INT)	+= s5p-irq-eint.o
+obj-$(CONFIG_S5P_GPIO_INT)	+= s5p-irq-gpioint.o
 
 # ADC
 
@@ -30,9 +36,13 @@ obj-y				+= platformdata.o
 
 obj-y				+= devs.o
 obj-y				+= dev-uart.o
+obj-$(CONFIG_S5P_DEV_MFC)	+= s5p-dev-mfc.o
+obj-$(CONFIG_S5P_DEV_UART)	+= s5p-dev-uart.o
 
 obj-$(CONFIG_SAMSUNG_DEV_BACKLIGHT)	+= dev-backlight.o
 
+obj-$(CONFIG_S5P_SETUP_MIPIPHY)	+= setup-mipiphy.o
+
 # DMA support
 
 obj-$(CONFIG_S3C_DMA)		+= dma.o s3c-dma-ops.o
@@ -47,6 +57,9 @@ obj-$(CONFIG_SAMSUNG_PM_CHECK)	+= pm-check.o
 
 obj-$(CONFIG_SAMSUNG_WAKEMASK)	+= wakeup-mask.o
 
+obj-$(CONFIG_S5P_PM)		+= s5p-pm.o s5p-irq-pm.o
+obj-$(CONFIG_S5P_SLEEP)		+= s5p-sleep.o
+
 # PD support
 
 obj-$(CONFIG_SAMSUNG_PD)	+= pd.o
diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index 8b928f9bc1c3..1d214cb9d770 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -30,6 +30,7 @@
 #include <linux/mmc/host.h>
 #include <linux/ioport.h>
 #include <linux/platform_data/s3c-hsudc.h>
+#include <linux/platform_data/s3c-hsotg.h>
 
 #include <asm/irq.h>
 #include <asm/pmu.h>
@@ -57,7 +58,6 @@
 #include <plat/sdhci.h>
 #include <plat/ts.h>
 #include <plat/udc.h>
-#include <plat/udc-hs.h>
 #include <plat/usb-control.h>
 #include <plat/usb-phy.h>
 #include <plat/regs-iic.h>
@@ -272,16 +272,8 @@ struct platform_device s5p_device_fimc3 = {
 
 #ifdef CONFIG_S5P_DEV_G2D
 static struct resource s5p_g2d_resource[] = {
-	[0] = {
-		.start	= S5P_PA_G2D,
-		.end	= S5P_PA_G2D + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_2D,
-		.end	= IRQ_2D,
-		.flags	= IORESOURCE_IRQ,
-	},
+	[0] = DEFINE_RES_MEM(S5P_PA_G2D, SZ_4K),
+	[1] = DEFINE_RES_IRQ(IRQ_2D),
 };
 
 struct platform_device s5p_device_g2d = {
@@ -370,7 +362,6 @@ struct s3c_sdhci_platdata s3c_hsmmc0_def_platdata = {
 	.max_width	= 4,
 	.host_caps	= (MMC_CAP_4_BIT_DATA |
 			   MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
-	.clk_type	= S3C_SDHCI_CLK_DIV_INTERNAL,
 };
 
 struct platform_device s3c_device_hsmmc0 = {
@@ -401,7 +392,6 @@ struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata = {
 	.max_width	= 4,
 	.host_caps	= (MMC_CAP_4_BIT_DATA |
 			   MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
-	.clk_type	= S3C_SDHCI_CLK_DIV_INTERNAL,
 };
 
 struct platform_device s3c_device_hsmmc1 = {
@@ -434,7 +424,6 @@ struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata = {
 	.max_width	= 4,
 	.host_caps	= (MMC_CAP_4_BIT_DATA |
 			   MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
-	.clk_type	= S3C_SDHCI_CLK_DIV_INTERNAL,
 };
 
 struct platform_device s3c_device_hsmmc2 = {
@@ -465,7 +454,6 @@ struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata = {
 	.max_width	= 4,
 	.host_caps	= (MMC_CAP_4_BIT_DATA |
 			   MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
-	.clk_type	= S3C_SDHCI_CLK_DIV_INTERNAL,
 };
 
 struct platform_device s3c_device_hsmmc3 = {
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index 787ceaca0be8..0721293fad63 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -202,7 +202,7 @@ extern struct bus_type s3c2443_subsys;
 extern struct bus_type s3c6410_subsys;
 extern struct bus_type s5p64x0_subsys;
 extern struct bus_type s5pv210_subsys;
-extern struct bus_type exynos4_subsys;
+extern struct bus_type exynos_subsys;
 
 extern void (*s5pc1xx_idle)(void);
 
diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h
index 2155d4af62a3..61ca2f356c52 100644
--- a/arch/arm/plat-samsung/include/plat/devs.h
+++ b/arch/arm/plat-samsung/include/plat/devs.h
@@ -133,7 +133,8 @@ extern struct platform_device exynos4_device_pcm1;
 extern struct platform_device exynos4_device_pcm2;
 extern struct platform_device exynos4_device_pd[];
 extern struct platform_device exynos4_device_spdif;
-extern struct platform_device exynos4_device_sysmmu;
+
+extern struct platform_device exynos_device_drm;
 
 extern struct platform_device samsung_asoc_dma;
 extern struct platform_device samsung_asoc_idma;
diff --git a/arch/arm/plat-samsung/include/plat/dma-pl330.h b/arch/arm/plat-samsung/include/plat/dma-pl330.h
index 0670f37aaaed..d384a8016b47 100644
--- a/arch/arm/plat-samsung/include/plat/dma-pl330.h
+++ b/arch/arm/plat-samsung/include/plat/dma-pl330.h
@@ -90,6 +90,7 @@ enum dma_ch {
 	DMACH_MIPI_HSI5,
 	DMACH_MIPI_HSI6,
 	DMACH_MIPI_HSI7,
+	DMACH_DISP1,
 	DMACH_MTOM_0,
 	DMACH_MTOM_1,
 	DMACH_MTOM_2,
diff --git a/arch/arm/plat-samsung/include/plat/regs-usb-hsotg.h b/arch/arm/plat-samsung/include/plat/regs-usb-hsotg.h
deleted file mode 100644
index dc90f5ede88f..000000000000
--- a/arch/arm/plat-samsung/include/plat/regs-usb-hsotg.h
+++ /dev/null
@@ -1,379 +0,0 @@
-/* arch/arm/plat-s3c/include/plat/regs-usb-hsotg.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      http://armlinux.simtec.co.uk/
- *      Ben Dooks <ben@simtec.co.uk>
- *
- * S3C - USB2.0 Highspeed/OtG device block registers
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_S3C64XX_REGS_USB_HSOTG_H
-#define __PLAT_S3C64XX_REGS_USB_HSOTG_H __FILE__
-
-#define S3C_HSOTG_REG(x) (x)
-
-#define S3C_GOTGCTL				S3C_HSOTG_REG(0x000)
-#define S3C_GOTGCTL_BSESVLD			(1 << 19)
-#define S3C_GOTGCTL_ASESVLD			(1 << 18)
-#define S3C_GOTGCTL_DBNC_SHORT			(1 << 17)
-#define S3C_GOTGCTL_CONID_B			(1 << 16)
-#define S3C_GOTGCTL_DEVHNPEN			(1 << 11)
-#define S3C_GOTGCTL_HSSETHNPEN			(1 << 10)
-#define S3C_GOTGCTL_HNPREQ			(1 << 9)
-#define S3C_GOTGCTL_HSTNEGSCS			(1 << 8)
-#define S3C_GOTGCTL_SESREQ			(1 << 1)
-#define S3C_GOTGCTL_SESREQSCS			(1 << 0)
-
-#define S3C_GOTGINT				S3C_HSOTG_REG(0x004)
-#define S3C_GOTGINT_DbnceDone			(1 << 19)
-#define S3C_GOTGINT_ADevTOUTChg			(1 << 18)
-#define S3C_GOTGINT_HstNegDet			(1 << 17)
-#define S3C_GOTGINT_HstnegSucStsChng		(1 << 9)
-#define S3C_GOTGINT_SesReqSucStsChng		(1 << 8)
-#define S3C_GOTGINT_SesEndDet			(1 << 2)
-
-#define S3C_GAHBCFG				S3C_HSOTG_REG(0x008)
-#define S3C_GAHBCFG_PTxFEmpLvl			(1 << 8)
-#define S3C_GAHBCFG_NPTxFEmpLvl			(1 << 7)
-#define S3C_GAHBCFG_DMAEn			(1 << 5)
-#define S3C_GAHBCFG_HBstLen_MASK		(0xf << 1)
-#define S3C_GAHBCFG_HBstLen_SHIFT		(1)
-#define S3C_GAHBCFG_HBstLen_Single		(0x0 << 1)
-#define S3C_GAHBCFG_HBstLen_Incr		(0x1 << 1)
-#define S3C_GAHBCFG_HBstLen_Incr4		(0x3 << 1)
-#define S3C_GAHBCFG_HBstLen_Incr8		(0x5 << 1)
-#define S3C_GAHBCFG_HBstLen_Incr16		(0x7 << 1)
-#define S3C_GAHBCFG_GlblIntrEn			(1 << 0)
-
-#define S3C_GUSBCFG				S3C_HSOTG_REG(0x00C)
-#define S3C_GUSBCFG_PHYLPClkSel			(1 << 15)
-#define S3C_GUSBCFG_HNPCap			(1 << 9)
-#define S3C_GUSBCFG_SRPCap			(1 << 8)
-#define S3C_GUSBCFG_PHYIf16			(1 << 3)
-#define S3C_GUSBCFG_TOutCal_MASK		(0x7 << 0)
-#define S3C_GUSBCFG_TOutCal_SHIFT		(0)
-#define S3C_GUSBCFG_TOutCal_LIMIT		(0x7)
-#define S3C_GUSBCFG_TOutCal(_x)			((_x) << 0)
-
-#define S3C_GRSTCTL				S3C_HSOTG_REG(0x010)
-
-#define S3C_GRSTCTL_AHBIdle			(1 << 31)
-#define S3C_GRSTCTL_DMAReq			(1 << 30)
-#define S3C_GRSTCTL_TxFNum_MASK			(0x1f << 6)
-#define S3C_GRSTCTL_TxFNum_SHIFT		(6)
-#define S3C_GRSTCTL_TxFNum_LIMIT		(0x1f)
-#define S3C_GRSTCTL_TxFNum(_x)			((_x) << 6)
-#define S3C_GRSTCTL_TxFFlsh			(1 << 5)
-#define S3C_GRSTCTL_RxFFlsh			(1 << 4)
-#define S3C_GRSTCTL_INTknQFlsh			(1 << 3)
-#define S3C_GRSTCTL_FrmCntrRst			(1 << 2)
-#define S3C_GRSTCTL_HSftRst			(1 << 1)
-#define S3C_GRSTCTL_CSftRst			(1 << 0)
-
-#define S3C_GINTSTS				S3C_HSOTG_REG(0x014)
-#define S3C_GINTMSK				S3C_HSOTG_REG(0x018)
-
-#define S3C_GINTSTS_WkUpInt			(1 << 31)
-#define S3C_GINTSTS_SessReqInt			(1 << 30)
-#define S3C_GINTSTS_DisconnInt			(1 << 29)
-#define S3C_GINTSTS_ConIDStsChng		(1 << 28)
-#define S3C_GINTSTS_PTxFEmp			(1 << 26)
-#define S3C_GINTSTS_HChInt			(1 << 25)
-#define S3C_GINTSTS_PrtInt			(1 << 24)
-#define S3C_GINTSTS_FetSusp			(1 << 22)
-#define S3C_GINTSTS_incompIP			(1 << 21)
-#define S3C_GINTSTS_IncomplSOIN			(1 << 20)
-#define S3C_GINTSTS_OEPInt			(1 << 19)
-#define S3C_GINTSTS_IEPInt			(1 << 18)
-#define S3C_GINTSTS_EPMis			(1 << 17)
-#define S3C_GINTSTS_EOPF			(1 << 15)
-#define S3C_GINTSTS_ISOutDrop			(1 << 14)
-#define S3C_GINTSTS_EnumDone			(1 << 13)
-#define S3C_GINTSTS_USBRst			(1 << 12)
-#define S3C_GINTSTS_USBSusp			(1 << 11)
-#define S3C_GINTSTS_ErlySusp			(1 << 10)
-#define S3C_GINTSTS_GOUTNakEff			(1 << 7)
-#define S3C_GINTSTS_GINNakEff			(1 << 6)
-#define S3C_GINTSTS_NPTxFEmp			(1 << 5)
-#define S3C_GINTSTS_RxFLvl			(1 << 4)
-#define S3C_GINTSTS_SOF				(1 << 3)
-#define S3C_GINTSTS_OTGInt			(1 << 2)
-#define S3C_GINTSTS_ModeMis			(1 << 1)
-#define S3C_GINTSTS_CurMod_Host			(1 << 0)
-
-#define S3C_GRXSTSR				S3C_HSOTG_REG(0x01C)
-#define S3C_GRXSTSP				S3C_HSOTG_REG(0x020)
-
-#define S3C_GRXSTS_FN_MASK			(0x7f << 25)
-#define S3C_GRXSTS_FN_SHIFT			(25)
-
-#define S3C_GRXSTS_PktSts_MASK			(0xf << 17)
-#define S3C_GRXSTS_PktSts_SHIFT			(17)
-#define S3C_GRXSTS_PktSts_GlobalOutNAK		(0x1 << 17)
-#define S3C_GRXSTS_PktSts_OutRX			(0x2 << 17)
-#define S3C_GRXSTS_PktSts_OutDone		(0x3 << 17)
-#define S3C_GRXSTS_PktSts_SetupDone		(0x4 << 17)
-#define S3C_GRXSTS_PktSts_SetupRX		(0x6 << 17)
-
-#define S3C_GRXSTS_DPID_MASK			(0x3 << 15)
-#define S3C_GRXSTS_DPID_SHIFT			(15)
-#define S3C_GRXSTS_ByteCnt_MASK			(0x7ff << 4)
-#define S3C_GRXSTS_ByteCnt_SHIFT		(4)
-#define S3C_GRXSTS_EPNum_MASK			(0xf << 0)
-#define S3C_GRXSTS_EPNum_SHIFT			(0)
-
-#define S3C_GRXFSIZ				S3C_HSOTG_REG(0x024)
-
-#define S3C_GNPTXFSIZ				S3C_HSOTG_REG(0x028)
-
-#define S3C_GNPTXFSIZ_NPTxFDep_MASK		(0xffff << 16)
-#define S3C_GNPTXFSIZ_NPTxFDep_SHIFT		(16)
-#define S3C_GNPTXFSIZ_NPTxFDep_LIMIT		(0xffff)
-#define S3C_GNPTXFSIZ_NPTxFDep(_x)		((_x) << 16)
-#define S3C_GNPTXFSIZ_NPTxFStAddr_MASK		(0xffff << 0)
-#define S3C_GNPTXFSIZ_NPTxFStAddr_SHIFT		(0)
-#define S3C_GNPTXFSIZ_NPTxFStAddr_LIMIT		(0xffff)
-#define S3C_GNPTXFSIZ_NPTxFStAddr(_x)		((_x) << 0)
-
-#define S3C_GNPTXSTS				S3C_HSOTG_REG(0x02C)
-
-#define S3C_GNPTXSTS_NPtxQTop_MASK		(0x7f << 24)
-#define S3C_GNPTXSTS_NPtxQTop_SHIFT		(24)
-
-#define S3C_GNPTXSTS_NPTxQSpcAvail_MASK		(0xff << 16)
-#define S3C_GNPTXSTS_NPTxQSpcAvail_SHIFT	(16)
-#define S3C_GNPTXSTS_NPTxQSpcAvail_GET(_v)	(((_v) >> 16) & 0xff)
-
-#define S3C_GNPTXSTS_NPTxFSpcAvail_MASK		(0xffff << 0)
-#define S3C_GNPTXSTS_NPTxFSpcAvail_SHIFT	(0)
-#define S3C_GNPTXSTS_NPTxFSpcAvail_GET(_v)	(((_v) >> 0) & 0xffff)
-
-
-#define S3C_HPTXFSIZ				S3C_HSOTG_REG(0x100)
-
-#define S3C_DPTXFSIZn(_a)			S3C_HSOTG_REG(0x104 + (((_a) - 1) * 4))
-
-#define S3C_DPTXFSIZn_DPTxFSize_MASK		(0xffff << 16)
-#define S3C_DPTXFSIZn_DPTxFSize_SHIFT		(16)
-#define S3C_DPTXFSIZn_DPTxFSize_GET(_v)		(((_v) >> 16) & 0xffff)
-#define S3C_DPTXFSIZn_DPTxFSize_LIMIT		(0xffff)
-#define S3C_DPTXFSIZn_DPTxFSize(_x)		((_x) << 16)
-
-#define S3C_DPTXFSIZn_DPTxFStAddr_MASK		(0xffff << 0)
-#define S3C_DPTXFSIZn_DPTxFStAddr_SHIFT		(0)
-
-/* Device mode registers */
-#define S3C_DCFG				S3C_HSOTG_REG(0x800)
-
-#define S3C_DCFG_EPMisCnt_MASK			(0x1f << 18)
-#define S3C_DCFG_EPMisCnt_SHIFT			(18)
-#define S3C_DCFG_EPMisCnt_LIMIT			(0x1f)
-#define S3C_DCFG_EPMisCnt(_x)			((_x) << 18)
-
-#define S3C_DCFG_PerFrInt_MASK			(0x3 << 11)
-#define S3C_DCFG_PerFrInt_SHIFT			(11)
-#define S3C_DCFG_PerFrInt_LIMIT			(0x3)
-#define S3C_DCFG_PerFrInt(_x)			((_x) << 11)
-
-#define S3C_DCFG_DevAddr_MASK			(0x7f << 4)
-#define S3C_DCFG_DevAddr_SHIFT			(4)
-#define S3C_DCFG_DevAddr_LIMIT			(0x7f)
-#define S3C_DCFG_DevAddr(_x)			((_x) << 4)
-
-#define S3C_DCFG_NZStsOUTHShk			(1 << 2)
-
-#define S3C_DCFG_DevSpd_MASK			(0x3 << 0)
-#define S3C_DCFG_DevSpd_SHIFT			(0)
-#define S3C_DCFG_DevSpd_HS			(0x0 << 0)
-#define S3C_DCFG_DevSpd_FS			(0x1 << 0)
-#define S3C_DCFG_DevSpd_LS			(0x2 << 0)
-#define S3C_DCFG_DevSpd_FS48			(0x3 << 0)
-
-#define S3C_DCTL				S3C_HSOTG_REG(0x804)
-
-#define S3C_DCTL_PWROnPrgDone			(1 << 11)
-#define S3C_DCTL_CGOUTNak			(1 << 10)
-#define S3C_DCTL_SGOUTNak			(1 << 9)
-#define S3C_DCTL_CGNPInNAK			(1 << 8)
-#define S3C_DCTL_SGNPInNAK			(1 << 7)
-#define S3C_DCTL_TstCtl_MASK			(0x7 << 4)
-#define S3C_DCTL_TstCtl_SHIFT			(4)
-#define S3C_DCTL_GOUTNakSts			(1 << 3)
-#define S3C_DCTL_GNPINNakSts			(1 << 2)
-#define S3C_DCTL_SftDiscon			(1 << 1)
-#define S3C_DCTL_RmtWkUpSig			(1 << 0)
-
-#define S3C_DSTS				S3C_HSOTG_REG(0x808)
-
-#define S3C_DSTS_SOFFN_MASK			(0x3fff << 8)
-#define S3C_DSTS_SOFFN_SHIFT			(8)
-#define S3C_DSTS_SOFFN_LIMIT			(0x3fff)
-#define S3C_DSTS_SOFFN(_x)			((_x) << 8)
-#define S3C_DSTS_ErraticErr			(1 << 3)
-#define S3C_DSTS_EnumSpd_MASK			(0x3 << 1)
-#define S3C_DSTS_EnumSpd_SHIFT			(1)
-#define S3C_DSTS_EnumSpd_HS			(0x0 << 1)
-#define S3C_DSTS_EnumSpd_FS			(0x1 << 1)
-#define S3C_DSTS_EnumSpd_LS			(0x2 << 1)
-#define S3C_DSTS_EnumSpd_FS48			(0x3 << 1)
-
-#define S3C_DSTS_SuspSts			(1 << 0)
-
-#define S3C_DIEPMSK				S3C_HSOTG_REG(0x810)
-
-#define S3C_DIEPMSK_TxFIFOEmpty			(1 << 7)
-#define S3C_DIEPMSK_INEPNakEffMsk		(1 << 6)
-#define S3C_DIEPMSK_INTknEPMisMsk		(1 << 5)
-#define S3C_DIEPMSK_INTknTXFEmpMsk		(1 << 4)
-#define S3C_DIEPMSK_TimeOUTMsk			(1 << 3)
-#define S3C_DIEPMSK_AHBErrMsk			(1 << 2)
-#define S3C_DIEPMSK_EPDisbldMsk			(1 << 1)
-#define S3C_DIEPMSK_XferComplMsk		(1 << 0)
-
-#define S3C_DOEPMSK				S3C_HSOTG_REG(0x814)
-
-#define S3C_DOEPMSK_Back2BackSetup		(1 << 6)
-#define S3C_DOEPMSK_OUTTknEPdisMsk		(1 << 4)
-#define S3C_DOEPMSK_SetupMsk			(1 << 3)
-#define S3C_DOEPMSK_AHBErrMsk			(1 << 2)
-#define S3C_DOEPMSK_EPDisbldMsk			(1 << 1)
-#define S3C_DOEPMSK_XferComplMsk		(1 << 0)
-
-#define S3C_DAINT				S3C_HSOTG_REG(0x818)
-#define S3C_DAINTMSK				S3C_HSOTG_REG(0x81C)
-
-#define S3C_DAINT_OutEP_SHIFT			(16)
-#define S3C_DAINT_OutEP(x)			(1 << ((x) + 16))
-#define S3C_DAINT_InEP(x)			(1 << (x))
-
-#define S3C_DTKNQR1				S3C_HSOTG_REG(0x820)
-#define S3C_DTKNQR2				S3C_HSOTG_REG(0x824)
-#define S3C_DTKNQR3				S3C_HSOTG_REG(0x830)
-#define S3C_DTKNQR4				S3C_HSOTG_REG(0x834)
-
-#define S3C_DVBUSDIS				S3C_HSOTG_REG(0x828)
-#define S3C_DVBUSPULSE				S3C_HSOTG_REG(0x82C)
-
-#define S3C_DIEPCTL0				S3C_HSOTG_REG(0x900)
-#define S3C_DOEPCTL0				S3C_HSOTG_REG(0xB00)
-#define S3C_DIEPCTL(_a)				S3C_HSOTG_REG(0x900 + ((_a) * 0x20))
-#define S3C_DOEPCTL(_a)				S3C_HSOTG_REG(0xB00 + ((_a) * 0x20))
-
-/* EP0 specialness:
- * bits[29..28] - reserved (no SetD0PID, SetD1PID)
- * bits[25..22] - should always be zero, this isn't a periodic endpoint
- * bits[10..0] - MPS setting differenct for EP0
-*/
-#define S3C_D0EPCTL_MPS_MASK			(0x3 << 0)
-#define S3C_D0EPCTL_MPS_SHIFT			(0)
-#define S3C_D0EPCTL_MPS_64			(0x0 << 0)
-#define S3C_D0EPCTL_MPS_32			(0x1 << 0)
-#define S3C_D0EPCTL_MPS_16			(0x2 << 0)
-#define S3C_D0EPCTL_MPS_8			(0x3 << 0)
-
-#define S3C_DxEPCTL_EPEna			(1 << 31)
-#define S3C_DxEPCTL_EPDis			(1 << 30)
-#define S3C_DxEPCTL_SetD1PID			(1 << 29)
-#define S3C_DxEPCTL_SetOddFr			(1 << 29)
-#define S3C_DxEPCTL_SetD0PID			(1 << 28)
-#define S3C_DxEPCTL_SetEvenFr			(1 << 28)
-#define S3C_DxEPCTL_SNAK			(1 << 27)
-#define S3C_DxEPCTL_CNAK			(1 << 26)
-#define S3C_DxEPCTL_TxFNum_MASK			(0xf << 22)
-#define S3C_DxEPCTL_TxFNum_SHIFT		(22)
-#define S3C_DxEPCTL_TxFNum_LIMIT		(0xf)
-#define S3C_DxEPCTL_TxFNum(_x)			((_x) << 22)
-
-#define S3C_DxEPCTL_Stall			(1 << 21)
-#define S3C_DxEPCTL_Snp				(1 << 20)
-#define S3C_DxEPCTL_EPType_MASK			(0x3 << 18)
-#define S3C_DxEPCTL_EPType_SHIFT		(18)
-#define S3C_DxEPCTL_EPType_Control		(0x0 << 18)
-#define S3C_DxEPCTL_EPType_Iso			(0x1 << 18)
-#define S3C_DxEPCTL_EPType_Bulk			(0x2 << 18)
-#define S3C_DxEPCTL_EPType_Intterupt		(0x3 << 18)
-
-#define S3C_DxEPCTL_NAKsts			(1 << 17)
-#define S3C_DxEPCTL_DPID			(1 << 16)
-#define S3C_DxEPCTL_EOFrNum			(1 << 16)
-#define S3C_DxEPCTL_USBActEp			(1 << 15)
-#define S3C_DxEPCTL_NextEp_MASK			(0xf << 11)
-#define S3C_DxEPCTL_NextEp_SHIFT		(11)
-#define S3C_DxEPCTL_NextEp_LIMIT		(0xf)
-#define S3C_DxEPCTL_NextEp(_x)			((_x) << 11)
-
-#define S3C_DxEPCTL_MPS_MASK			(0x7ff << 0)
-#define S3C_DxEPCTL_MPS_SHIFT			(0)
-#define S3C_DxEPCTL_MPS_LIMIT			(0x7ff)
-#define S3C_DxEPCTL_MPS(_x)			((_x) << 0)
-
-#define S3C_DIEPINT(_a)				S3C_HSOTG_REG(0x908 + ((_a) * 0x20))
-#define S3C_DOEPINT(_a)				S3C_HSOTG_REG(0xB08 + ((_a) * 0x20))
-
-#define S3C_DxEPINT_INEPNakEff			(1 << 6)
-#define S3C_DxEPINT_Back2BackSetup		(1 << 6)
-#define S3C_DxEPINT_INTknEPMis			(1 << 5)
-#define S3C_DxEPINT_INTknTXFEmp			(1 << 4)
-#define S3C_DxEPINT_OUTTknEPdis			(1 << 4)
-#define S3C_DxEPINT_Timeout			(1 << 3)
-#define S3C_DxEPINT_Setup			(1 << 3)
-#define S3C_DxEPINT_AHBErr			(1 << 2)
-#define S3C_DxEPINT_EPDisbld			(1 << 1)
-#define S3C_DxEPINT_XferCompl			(1 << 0)
-
-#define S3C_DIEPTSIZ0				S3C_HSOTG_REG(0x910)
-
-#define S3C_DIEPTSIZ0_PktCnt_MASK		(0x3 << 19)
-#define S3C_DIEPTSIZ0_PktCnt_SHIFT		(19)
-#define S3C_DIEPTSIZ0_PktCnt_LIMIT		(0x3)
-#define S3C_DIEPTSIZ0_PktCnt(_x)		((_x) << 19)
-
-#define S3C_DIEPTSIZ0_XferSize_MASK		(0x7f << 0)
-#define S3C_DIEPTSIZ0_XferSize_SHIFT		(0)
-#define S3C_DIEPTSIZ0_XferSize_LIMIT		(0x7f)
-#define S3C_DIEPTSIZ0_XferSize(_x)		((_x) << 0)
-
-
-#define DOEPTSIZ0				S3C_HSOTG_REG(0xB10)
-#define S3C_DOEPTSIZ0_SUPCnt_MASK		(0x3 << 29)
-#define S3C_DOEPTSIZ0_SUPCnt_SHIFT		(29)
-#define S3C_DOEPTSIZ0_SUPCnt_LIMIT		(0x3)
-#define S3C_DOEPTSIZ0_SUPCnt(_x)		((_x) << 29)
-
-#define S3C_DOEPTSIZ0_PktCnt			(1 << 19)
-#define S3C_DOEPTSIZ0_XferSize_MASK		(0x7f << 0)
-#define S3C_DOEPTSIZ0_XferSize_SHIFT		(0)
-
-#define S3C_DIEPTSIZ(_a)			S3C_HSOTG_REG(0x910 + ((_a) * 0x20))
-#define S3C_DOEPTSIZ(_a)			S3C_HSOTG_REG(0xB10 + ((_a) * 0x20))
-
-#define S3C_DxEPTSIZ_MC_MASK			(0x3 << 29)
-#define S3C_DxEPTSIZ_MC_SHIFT			(29)
-#define S3C_DxEPTSIZ_MC_LIMIT			(0x3)
-#define S3C_DxEPTSIZ_MC(_x)			((_x) << 29)
-
-#define S3C_DxEPTSIZ_PktCnt_MASK		(0x3ff << 19)
-#define S3C_DxEPTSIZ_PktCnt_SHIFT		(19)
-#define S3C_DxEPTSIZ_PktCnt_GET(_v)		(((_v) >> 19) & 0x3ff)
-#define S3C_DxEPTSIZ_PktCnt_LIMIT		(0x3ff)
-#define S3C_DxEPTSIZ_PktCnt(_x)			((_x) << 19)
-
-#define S3C_DxEPTSIZ_XferSize_MASK		(0x7ffff << 0)
-#define S3C_DxEPTSIZ_XferSize_SHIFT		(0)
-#define S3C_DxEPTSIZ_XferSize_GET(_v)		(((_v) >> 0) & 0x7ffff)
-#define S3C_DxEPTSIZ_XferSize_LIMIT		(0x7ffff)
-#define S3C_DxEPTSIZ_XferSize(_x)		((_x) << 0)
-
-
-#define S3C_DIEPDMA(_a)				S3C_HSOTG_REG(0x914 + ((_a) * 0x20))
-#define S3C_DOEPDMA(_a)				S3C_HSOTG_REG(0xB14 + ((_a) * 0x20))
-#define S3C_DTXFSTS(_a)				S3C_HSOTG_REG(0x918 + ((_a) * 0x20))
-
-#define S3C_EPFIFO(_a)				S3C_HSOTG_REG(0x1000 + ((_a) * 0x1000))
-
-#endif /* __PLAT_S3C64XX_REGS_USB_HSOTG_H */
diff --git a/arch/arm/plat-samsung/include/plat/s3c2416.h b/arch/arm/plat-samsung/include/plat/s3c2416.h
index de2b5bdc5ebd..7178e338e25e 100644
--- a/arch/arm/plat-samsung/include/plat/s3c2416.h
+++ b/arch/arm/plat-samsung/include/plat/s3c2416.h
@@ -24,6 +24,9 @@ extern void s3c2416_init_clocks(int xtal);
 extern  int s3c2416_baseclk_add(void);
 
 extern void s3c2416_restart(char mode, const char *cmd);
+
+extern struct syscore_ops s3c2416_irq_syscore_ops;
+
 #else
 #define s3c2416_init_clocks NULL
 #define s3c2416_init_uarts NULL
diff --git a/arch/arm/plat-samsung/include/plat/s5p-clock.h b/arch/arm/plat-samsung/include/plat/s5p-clock.h
index 1de4b32f98e9..8364b4bea8b8 100644
--- a/arch/arm/plat-samsung/include/plat/s5p-clock.h
+++ b/arch/arm/plat-samsung/include/plat/s5p-clock.h
@@ -32,8 +32,10 @@ extern struct clk clk_48m;
 extern struct clk s5p_clk_27m;
 extern struct clk clk_fout_apll;
 extern struct clk clk_fout_bpll;
+extern struct clk clk_fout_bpll_div2;
 extern struct clk clk_fout_cpll;
 extern struct clk clk_fout_mpll;
+extern struct clk clk_fout_mpll_div2;
 extern struct clk clk_fout_epll;
 extern struct clk clk_fout_dpll;
 extern struct clk clk_fout_vpll;
@@ -42,8 +44,10 @@ extern struct clk clk_vpll;
 
 extern struct clksrc_sources clk_src_apll;
 extern struct clksrc_sources clk_src_bpll;
+extern struct clksrc_sources clk_src_bpll_fout;
 extern struct clksrc_sources clk_src_cpll;
 extern struct clksrc_sources clk_src_mpll;
+extern struct clksrc_sources clk_src_mpll_fout;
 extern struct clksrc_sources clk_src_epll;
 extern struct clksrc_sources clk_src_dpll;
 
diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h
index 317e246ffc56..151cc9195cf6 100644
--- a/arch/arm/plat-samsung/include/plat/sdhci.h
+++ b/arch/arm/plat-samsung/include/plat/sdhci.h
@@ -18,6 +18,8 @@
 #ifndef __PLAT_S3C_SDHCI_H
 #define __PLAT_S3C_SDHCI_H __FILE__
 
+#include <plat/devs.h>
+
 struct platform_device;
 struct mmc_host;
 struct mmc_card;
@@ -31,18 +33,12 @@ enum cd_types {
 	S3C_SDHCI_CD_PERMANENT,	/* no CD line, card permanently wired to host */
 };
 
-enum clk_types {
-	S3C_SDHCI_CLK_DIV_INTERNAL,	/* use mmc internal clock divider */
-	S3C_SDHCI_CLK_DIV_EXTERNAL,	/* use external clock divider */
-};
-
 /**
  * struct s3c_sdhci_platdata() - Platform device data for Samsung SDHCI
  * @max_width: The maximum number of data bits supported.
  * @host_caps: Standard MMC host capabilities bit field.
  * @host_caps2: The second standard MMC host capabilities bit field.
  * @cd_type: Type of Card Detection method (see cd_types enum above)
- * @clk_type: Type of clock divider method (see clk_types enum above)
  * @ext_cd_init: Initialize external card detect subsystem. Called on
  *		 sdhci-s3c driver probe when cd_type == S3C_SDHCI_CD_EXTERNAL.
  *		 notify_func argument is a callback to the sdhci-s3c driver
@@ -67,7 +63,6 @@ struct s3c_sdhci_platdata {
 	unsigned int	host_caps2;
 	unsigned int	pm_caps;
 	enum cd_types	cd_type;
-	enum clk_types	clk_type;
 
 	int		ext_cd_gpio;
 	bool		ext_cd_gpio_invert;
@@ -356,4 +351,30 @@ static inline void exynos4_default_sdhci3(void) { }
 
 #endif /* CONFIG_EXYNOS4_SETUP_SDHCI */
 
+static inline void s3c_sdhci_setname(int id, char *name)
+{
+	switch (id) {
+#ifdef CONFIG_S3C_DEV_HSMMC
+	case 0:
+		s3c_device_hsmmc0.name = name;
+		break;
+#endif
+#ifdef CONFIG_S3C_DEV_HSMMC1
+	case 1:
+		s3c_device_hsmmc1.name = name;
+		break;
+#endif
+#ifdef CONFIG_S3C_DEV_HSMMC2
+	case 2:
+		s3c_device_hsmmc2.name = name;
+		break;
+#endif
+#ifdef CONFIG_S3C_DEV_HSMMC3
+	case 3:
+		s3c_device_hsmmc3.name = name;
+		break;
+#endif
+	}
+}
+
 #endif /* __PLAT_S3C_SDHCI_H */
diff --git a/arch/arm/plat-samsung/include/plat/sysmmu.h b/arch/arm/plat-samsung/include/plat/sysmmu.h
deleted file mode 100644
index 5fe8ee01a5ba..000000000000
--- a/arch/arm/plat-samsung/include/plat/sysmmu.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/sysmmu.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung System MMU driver for S5P platform
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_SAMSUNG_SYSMMU_H
-#define __PLAT_SAMSUNG_SYSMMU_H __FILE__
-
-enum S5P_SYSMMU_INTERRUPT_TYPE {
-	SYSMMU_PAGEFAULT,
-	SYSMMU_AR_MULTIHIT,
-	SYSMMU_AW_MULTIHIT,
-	SYSMMU_BUSERROR,
-	SYSMMU_AR_SECURITY,
-	SYSMMU_AR_ACCESS,
-	SYSMMU_AW_SECURITY,
-	SYSMMU_AW_PROTECTION, /* 7 */
-	SYSMMU_FAULTS_NUM
-};
-
-#ifdef CONFIG_S5P_SYSTEM_MMU
-
-#include <mach/sysmmu.h>
-
-/**
- * s5p_sysmmu_enable() - enable system mmu of ip
- * @ips: The ip connected system mmu.
- * #pgd: Base physical address of the 1st level page table
- *
- * This function enable system mmu to transfer address
- * from virtual address to physical address
- */
-void s5p_sysmmu_enable(sysmmu_ips ips, unsigned long pgd);
-
-/**
- * s5p_sysmmu_disable() - disable sysmmu mmu of ip
- * @ips: The ip connected system mmu.
- *
- * This function disable system mmu to transfer address
- * from virtual address to physical address
- */
-void s5p_sysmmu_disable(sysmmu_ips ips);
-
-/**
- * s5p_sysmmu_set_tablebase_pgd() - set page table base address to refer page table
- * @ips: The ip connected system mmu.
- * @pgd: The page table base address.
- *
- * This function set page table base address
- * When system mmu transfer address from virtaul address to physical address,
- * system mmu refer address information from page table
- */
-void s5p_sysmmu_set_tablebase_pgd(sysmmu_ips ips, unsigned long pgd);
-
-/**
- * s5p_sysmmu_tlb_invalidate() - flush all TLB entry in system mmu
- * @ips: The ip connected system mmu.
- *
- * This function flush all TLB entry in system mmu
- */
-void s5p_sysmmu_tlb_invalidate(sysmmu_ips ips);
-
-/** s5p_sysmmu_set_fault_handler() - Fault handler for System MMUs
- * @itype: type of fault.
- * @pgtable_base: the physical address of page table base. This is 0 if @ips is
- *               SYSMMU_BUSERROR.
- * @fault_addr: the device (virtual) address that the System MMU tried to
- *             translated. This is 0 if @ips is SYSMMU_BUSERROR.
- * Called when interrupt occurred by the System MMUs
- * The device drivers of peripheral devices that has a System MMU can implement
- * a fault handler to resolve address translation fault by System MMU.
- * The meanings of return value and parameters are described below.
-
- * return value: non-zero if the fault is correctly resolved.
- *         zero if the fault is not handled.
- */
-void s5p_sysmmu_set_fault_handler(sysmmu_ips ips,
-			int (*handler)(enum S5P_SYSMMU_INTERRUPT_TYPE itype,
-					unsigned long pgtable_base,
-					unsigned long fault_addr));
-#else
-#define s5p_sysmmu_enable(ips, pgd) do { } while (0)
-#define s5p_sysmmu_disable(ips) do { } while (0)
-#define s5p_sysmmu_set_tablebase_pgd(ips, pgd) do { } while (0)
-#define s5p_sysmmu_tlb_invalidate(ips) do { } while (0)
-#define s5p_sysmmu_set_fault_handler(ips, handler) do { } while (0)
-#endif
-#endif /* __ASM_PLAT_SYSMMU_H */
diff --git a/arch/arm/plat-samsung/include/plat/udc-hs.h b/arch/arm/plat-samsung/include/plat/udc-hs.h
deleted file mode 100644
index c9e3667cb2b1..000000000000
--- a/arch/arm/plat-samsung/include/plat/udc-hs.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/* arch/arm/plat-s3c/include/plat/udc-hs.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C USB2.0 High-speed / OtG platform information
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-enum s3c_hsotg_dmamode {
-	S3C_HSOTG_DMA_NONE,	/* do not use DMA at-all */
-	S3C_HSOTG_DMA_ONLY,	/* always use DMA */
-	S3C_HSOTG_DMA_DRV,	/* DMA is chosen by driver */
-};
-
-/**
- * struct s3c_hsotg_plat - platform data for high-speed otg/udc
- * @dma: Whether to use DMA or not.
- * @is_osc: The clock source is an oscillator, not a crystal
- */
-struct s3c_hsotg_plat {
-	enum s3c_hsotg_dmamode	dma;
-	unsigned int		is_osc : 1;
-
-	int (*phy_init)(struct platform_device *pdev, int type);
-	int (*phy_exit)(struct platform_device *pdev, int type);
-};
-
-extern void s3c_hsotg_set_platdata(struct s3c_hsotg_plat *pd);
diff --git a/arch/arm/plat-samsung/platformdata.c b/arch/arm/plat-samsung/platformdata.c
index fa78aa710ed1..b430e9946287 100644
--- a/arch/arm/plat-samsung/platformdata.c
+++ b/arch/arm/plat-samsung/platformdata.c
@@ -57,6 +57,4 @@ void s3c_sdhci_set_platdata(struct s3c_sdhci_platdata *pd,
 		set->host_caps2 |= pd->host_caps2;
 	if (pd->pm_caps)
 		set->pm_caps |= pd->pm_caps;
-	if (pd->clk_type)
-		set->clk_type = pd->clk_type;
 }
diff --git a/arch/arm/plat-s5p/clock.c b/arch/arm/plat-samsung/s5p-clock.c
index f68a9bb11948..031a61899bef 100644
--- a/arch/arm/plat-s5p/clock.c
+++ b/arch/arm/plat-samsung/s5p-clock.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/plat-s5p/clock.c
- *
+/*
  * Copyright 2009 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com/
  *
@@ -68,6 +67,11 @@ struct clk clk_fout_bpll = {
 	.id		= -1,
 };
 
+struct clk clk_fout_bpll_div2 = {
+	.name		= "fout_bpll_div2",
+	.id		= -1,
+};
+
 /* CPLL clock output */
 
 struct clk clk_fout_cpll = {
@@ -83,6 +87,11 @@ struct clk clk_fout_mpll = {
 	.id		= -1,
 };
 
+struct clk clk_fout_mpll_div2 = {
+	.name		= "fout_mpll_div2",
+	.id		= -1,
+};
+
 /* EPLL clock output */
 struct clk clk_fout_epll = {
 	.name		= "fout_epll",
@@ -126,6 +135,16 @@ struct clksrc_sources clk_src_bpll = {
 	.nr_sources	= ARRAY_SIZE(clk_src_bpll_list),
 };
 
+static struct clk *clk_src_bpll_fout_list[] = {
+	[0] = &clk_fout_bpll_div2,
+	[1] = &clk_fout_bpll,
+};
+
+struct clksrc_sources clk_src_bpll_fout = {
+	.sources	= clk_src_bpll_fout_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_bpll_fout_list),
+};
+
 /* Possible clock sources for CPLL Mux */
 static struct clk *clk_src_cpll_list[] = {
 	[0] = &clk_fin_cpll,
@@ -148,6 +167,16 @@ struct clksrc_sources clk_src_mpll = {
 	.nr_sources	= ARRAY_SIZE(clk_src_mpll_list),
 };
 
+static struct clk *clk_src_mpll_fout_list[] = {
+	[0] = &clk_fout_mpll_div2,
+	[1] = &clk_fout_mpll,
+};
+
+struct clksrc_sources clk_src_mpll_fout = {
+	.sources	= clk_src_mpll_fout_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_mpll_fout_list),
+};
+
 /* Possible clock sources for EPLL Mux */
 static struct clk *clk_src_epll_list[] = {
 	[0] = &clk_fin_epll,
diff --git a/arch/arm/plat-s5p/dev-mfc.c b/arch/arm/plat-samsung/s5p-dev-mfc.c
index a30d36b7f61b..ad6089465e2a 100644
--- a/arch/arm/plat-s5p/dev-mfc.c
+++ b/arch/arm/plat-samsung/s5p-dev-mfc.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/plat-s5p/dev-mfc.c
- *
+/*
  * Copyright (C) 2010-2011 Samsung Electronics Co.Ltd
  *
  * Base S5P MFC resource and device definitions
@@ -9,7 +8,6 @@
  * published by the Free Software Foundation.
  */
 
-
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
diff --git a/arch/arm/plat-s5p/dev-uart.c b/arch/arm/plat-samsung/s5p-dev-uart.c
index c9308db36183..cafa3deddcc1 100644
--- a/arch/arm/plat-s5p/dev-uart.c
+++ b/arch/arm/plat-samsung/s5p-dev-uart.c
@@ -1,6 +1,5 @@
-/* linux/arch/arm/plat-s5p/dev-uart.c
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+/*
+ * Copyright (c) 2009,2012 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com/
  *
  * Base S5P UART resource and device definitions
@@ -14,6 +13,7 @@
 #include <linux/types.h>
 #include <linux/interrupt.h>
 #include <linux/list.h>
+#include <linux/ioport.h>
 #include <linux/platform_device.h>
 
 #include <asm/mach/arch.h>
@@ -26,86 +26,38 @@
  /* Serial port registrations */
 
 static struct resource s5p_uart0_resource[] = {
-	[0] = {
-		.start	= S5P_PA_UART0,
-		.end	= S5P_PA_UART0 + S5P_SZ_UART - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_UART0,
-		.end	= IRQ_UART0,
-		.flags	= IORESOURCE_IRQ,
-	},
+	[0] = DEFINE_RES_MEM(S5P_PA_UART0, S5P_SZ_UART),
+	[1] = DEFINE_RES_IRQ(IRQ_UART0),
 };
 
 static struct resource s5p_uart1_resource[] = {
-	[0] = {
-		.start	= S5P_PA_UART1,
-		.end	= S5P_PA_UART1 + S5P_SZ_UART - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_UART1,
-		.end	= IRQ_UART1,
-		.flags	= IORESOURCE_IRQ,
-	},
+	[0] = DEFINE_RES_MEM(S5P_PA_UART1, S5P_SZ_UART),
+	[1] = DEFINE_RES_IRQ(IRQ_UART1),
 };
 
 static struct resource s5p_uart2_resource[] = {
-	[0] = {
-		.start	= S5P_PA_UART2,
-		.end	= S5P_PA_UART2 + S5P_SZ_UART - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_UART2,
-		.end	= IRQ_UART2,
-		.flags	= IORESOURCE_IRQ,
-	},
+	[0] = DEFINE_RES_MEM(S5P_PA_UART2, S5P_SZ_UART),
+	[1] = DEFINE_RES_IRQ(IRQ_UART2),
 };
 
 static struct resource s5p_uart3_resource[] = {
 #if CONFIG_SERIAL_SAMSUNG_UARTS > 3
-	[0] = {
-		.start	= S5P_PA_UART3,
-		.end	= S5P_PA_UART3 + S5P_SZ_UART - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_UART3,
-		.end	= IRQ_UART3,
-		.flags	= IORESOURCE_IRQ,
-	},
+	[0] = DEFINE_RES_MEM(S5P_PA_UART3, S5P_SZ_UART),
+	[1] = DEFINE_RES_IRQ(IRQ_UART3),
 #endif
 };
 
 static struct resource s5p_uart4_resource[] = {
 #if CONFIG_SERIAL_SAMSUNG_UARTS > 4
-	[0] = {
-		.start	= S5P_PA_UART4,
-		.end	= S5P_PA_UART4 + S5P_SZ_UART - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_UART4,
-		.end	= IRQ_UART4,
-		.flags	= IORESOURCE_IRQ,
-	},
+	[0] = DEFINE_RES_MEM(S5P_PA_UART4, S5P_SZ_UART),
+	[1] = DEFINE_RES_IRQ(IRQ_UART4),
 #endif
 };
 
 static struct resource s5p_uart5_resource[] = {
 #if CONFIG_SERIAL_SAMSUNG_UARTS > 5
-	[0] = {
-		.start	= S5P_PA_UART5,
-		.end	= S5P_PA_UART5 + S5P_SZ_UART - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_UART5,
-		.end	= IRQ_UART5,
-		.flags	= IORESOURCE_IRQ,
-	},
+	[0] = DEFINE_RES_MEM(S5P_PA_UART5, S5P_SZ_UART),
+	[1] = DEFINE_RES_IRQ(IRQ_UART5),
 #endif
 };
 
diff --git a/arch/arm/plat-s5p/irq-eint.c b/arch/arm/plat-samsung/s5p-irq-eint.c
index 139c050918c5..33bd3f3d20f5 100644
--- a/arch/arm/plat-s5p/irq-eint.c
+++ b/arch/arm/plat-samsung/s5p-irq-eint.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/plat-s5p/irq-eint.c
- *
+/*
  * Copyright (c) 2010 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  *
diff --git a/arch/arm/plat-s5p/irq-gpioint.c b/arch/arm/plat-samsung/s5p-irq-gpioint.c
index 82c7311017a2..f9431fe5b06e 100644
--- a/arch/arm/plat-s5p/irq-gpioint.c
+++ b/arch/arm/plat-samsung/s5p-irq-gpioint.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/plat-s5p/irq-gpioint.c
- *
+/*
  * Copyright (c) 2010 Samsung Electronics Co., Ltd.
  * Author: Kyungmin Park <kyungmin.park@samsung.com>
  * Author: Joonyoung Shim <jy0922.shim@samsung.com>
diff --git a/arch/arm/plat-s5p/irq-pm.c b/arch/arm/plat-samsung/s5p-irq-pm.c
index d1bfecae6c9f..7c1e3b7072fc 100644
--- a/arch/arm/plat-s5p/irq-pm.c
+++ b/arch/arm/plat-samsung/s5p-irq-pm.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/plat-s5p/irq-pm.c
- *
+/*
  * Copyright (c) 2010 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  *
diff --git a/arch/arm/plat-s5p/irq.c b/arch/arm/plat-samsung/s5p-irq.c
index afdaa1082b9f..dfb47d638f03 100644
--- a/arch/arm/plat-s5p/irq.c
+++ b/arch/arm/plat-samsung/s5p-irq.c
@@ -1,5 +1,4 @@
-/* arch/arm/plat-s5p/irq.c
- *
+/*
  * Copyright (c) 2009 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com/
  *
diff --git a/arch/arm/plat-s5p/pm.c b/arch/arm/plat-samsung/s5p-pm.c
index d15dc47b0e3d..0747468f0936 100644
--- a/arch/arm/plat-s5p/pm.c
+++ b/arch/arm/plat-samsung/s5p-pm.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/plat-s5p/pm.c
- *
+/*
  * Copyright (c) 2010 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  *
diff --git a/arch/arm/plat-s5p/sleep.S b/arch/arm/plat-samsung/s5p-sleep.S
index 006bd01eda02..bdf6dadf8790 100644
--- a/arch/arm/plat-s5p/sleep.S
+++ b/arch/arm/plat-samsung/s5p-sleep.S
@@ -1,5 +1,4 @@
-/* linux/arch/arm/plat-s5p/sleep.S
- *
+/*
  * Copyright (c) 2011 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  *
diff --git a/arch/arm/plat-s5p/s5p-time.c b/arch/arm/plat-samsung/s5p-time.c
index 17c0a2c58dfd..028b6e877eb9 100644
--- a/arch/arm/plat-s5p/s5p-time.c
+++ b/arch/arm/plat-samsung/s5p-time.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/plat-s5p/s5p-time.c
- *
+/*
  * Copyright (c) 2011 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com/
  *
diff --git a/arch/arm/plat-s5p/setup-mipiphy.c b/arch/arm/plat-samsung/setup-mipiphy.c
index 683c466c0e6a..683c466c0e6a 100644
--- a/arch/arm/plat-s5p/setup-mipiphy.c
+++ b/arch/arm/plat-samsung/setup-mipiphy.c
diff --git a/arch/arm/plat-spear/Kconfig b/arch/arm/plat-spear/Kconfig
index 1bb3dbce8810..4404f82d5979 100644
--- a/arch/arm/plat-spear/Kconfig
+++ b/arch/arm/plat-spear/Kconfig
@@ -8,10 +8,23 @@ choice
 	prompt "ST SPEAr Family"
 	default ARCH_SPEAR3XX
 
+config ARCH_SPEAR13XX
+	bool "ST SPEAr13xx with Device Tree"
+	select ARM_GIC
+	select CPU_V7
+	select USE_OF
+	select HAVE_SMP
+	select MIGHT_HAVE_CACHE_L2X0
+	select PINCTRL
+	help
+	  Supports for ARM's SPEAR13XX family
+
 config ARCH_SPEAR3XX
-	bool "SPEAr3XX"
+	bool "ST SPEAr3xx with Device Tree"
 	select ARM_VIC
 	select CPU_ARM926T
+	select USE_OF
+	select PINCTRL
 	help
 	  Supports for ARM's SPEAR3XX family
 
@@ -25,6 +38,7 @@ config ARCH_SPEAR6XX
 endchoice
 
 # Adding SPEAr machine specific configuration files
+source "arch/arm/mach-spear13xx/Kconfig"
 source "arch/arm/mach-spear3xx/Kconfig"
 source "arch/arm/mach-spear6xx/Kconfig"
 
diff --git a/arch/arm/plat-spear/Makefile b/arch/arm/plat-spear/Makefile
index e0f2e5b9530c..2607bd05c525 100644
--- a/arch/arm/plat-spear/Makefile
+++ b/arch/arm/plat-spear/Makefile
@@ -3,6 +3,7 @@
 #
 
 # Common support
-obj-y	:= clock.o restart.o time.o
+obj-y	:= restart.o time.o
 
-obj-$(CONFIG_ARCH_SPEAR3XX)	+= shirq.o padmux.o
+obj-$(CONFIG_ARCH_SPEAR3XX)	+= pl080.o shirq.o
+obj-$(CONFIG_ARCH_SPEAR6XX)	+= pl080.o
diff --git a/arch/arm/plat-spear/clock.c b/arch/arm/plat-spear/clock.c
deleted file mode 100644
index 67dd00381ea6..000000000000
--- a/arch/arm/plat-spear/clock.c
+++ /dev/null
@@ -1,1005 +0,0 @@
-/*
- * arch/arm/plat-spear/clock.c
- *
- * Clock framework for SPEAr platform
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/bug.h>
-#include <linux/clk.h>
-#include <linux/debugfs.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/list.h>
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <plat/clock.h>
-
-static DEFINE_SPINLOCK(clocks_lock);
-static LIST_HEAD(root_clks);
-#ifdef CONFIG_DEBUG_FS
-static LIST_HEAD(clocks);
-#endif
-
-static void propagate_rate(struct clk *, int on_init);
-#ifdef CONFIG_DEBUG_FS
-static int clk_debugfs_reparent(struct clk *);
-#endif
-
-static int generic_clk_enable(struct clk *clk)
-{
-	unsigned int val;
-
-	if (!clk->en_reg)
-		return -EFAULT;
-
-	val = readl(clk->en_reg);
-	if (unlikely(clk->flags & RESET_TO_ENABLE))
-		val &= ~(1 << clk->en_reg_bit);
-	else
-		val |= 1 << clk->en_reg_bit;
-
-	writel(val, clk->en_reg);
-
-	return 0;
-}
-
-static void generic_clk_disable(struct clk *clk)
-{
-	unsigned int val;
-
-	if (!clk->en_reg)
-		return;
-
-	val = readl(clk->en_reg);
-	if (unlikely(clk->flags & RESET_TO_ENABLE))
-		val |= 1 << clk->en_reg_bit;
-	else
-		val &= ~(1 << clk->en_reg_bit);
-
-	writel(val, clk->en_reg);
-}
-
-/* generic clk ops */
-static struct clkops generic_clkops = {
-	.enable = generic_clk_enable,
-	.disable = generic_clk_disable,
-};
-
-/* returns current programmed clocks clock info structure */
-static struct pclk_info *pclk_info_get(struct clk *clk)
-{
-	unsigned int val, i;
-	struct pclk_info *info = NULL;
-
-	val = (readl(clk->pclk_sel->pclk_sel_reg) >> clk->pclk_sel_shift)
-		& clk->pclk_sel->pclk_sel_mask;
-
-	for (i = 0; i < clk->pclk_sel->pclk_count; i++) {
-		if (clk->pclk_sel->pclk_info[i].pclk_val == val)
-			info = &clk->pclk_sel->pclk_info[i];
-	}
-
-	return info;
-}
-
-/*
- * Set Update pclk, and pclk_info of clk and add clock sibling node to current
- * parents children list
- */
-static void clk_reparent(struct clk *clk, struct pclk_info *pclk_info)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&clocks_lock, flags);
-	list_del(&clk->sibling);
-	list_add(&clk->sibling, &pclk_info->pclk->children);
-
-	clk->pclk = pclk_info->pclk;
-	spin_unlock_irqrestore(&clocks_lock, flags);
-
-#ifdef CONFIG_DEBUG_FS
-	clk_debugfs_reparent(clk);
-#endif
-}
-
-static void do_clk_disable(struct clk *clk)
-{
-	if (!clk)
-		return;
-
-	if (!clk->usage_count) {
-		WARN_ON(1);
-		return;
-	}
-
-	clk->usage_count--;
-
-	if (clk->usage_count == 0) {
-		/*
-		 * Surely, there are no active childrens or direct users
-		 * of this clock
-		 */
-		if (clk->pclk)
-			do_clk_disable(clk->pclk);
-
-		if (clk->ops && clk->ops->disable)
-			clk->ops->disable(clk);
-	}
-}
-
-static int do_clk_enable(struct clk *clk)
-{
-	int ret = 0;
-
-	if (!clk)
-		return -EFAULT;
-
-	if (clk->usage_count == 0) {
-		if (clk->pclk) {
-			ret = do_clk_enable(clk->pclk);
-			if (ret)
-				goto err;
-		}
-		if (clk->ops && clk->ops->enable) {
-			ret = clk->ops->enable(clk);
-			if (ret) {
-				if (clk->pclk)
-					do_clk_disable(clk->pclk);
-				goto err;
-			}
-		}
-		/*
-		 * Since the clock is going to be used for the first
-		 * time please reclac
-		 */
-		if (clk->recalc) {
-			ret = clk->recalc(clk);
-			if (ret)
-				goto err;
-		}
-	}
-	clk->usage_count++;
-err:
-	return ret;
-}
-
-/*
- * clk_enable - inform the system when the clock source should be running.
- * @clk: clock source
- *
- * If the clock can not be enabled/disabled, this should return success.
- *
- * Returns success (0) or negative errno.
- */
-int clk_enable(struct clk *clk)
-{
-	unsigned long flags;
-	int ret = 0;
-
-	spin_lock_irqsave(&clocks_lock, flags);
-	ret = do_clk_enable(clk);
-	spin_unlock_irqrestore(&clocks_lock, flags);
-	return ret;
-}
-EXPORT_SYMBOL(clk_enable);
-
-/*
- * clk_disable - inform the system when the clock source is no longer required.
- * @clk: clock source
- *
- * Inform the system that a clock source is no longer required by
- * a driver and may be shut down.
- *
- * Implementation detail: if the clock source is shared between
- * multiple drivers, clk_enable() calls must be balanced by the
- * same number of clk_disable() calls for the clock source to be
- * disabled.
- */
-void clk_disable(struct clk *clk)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&clocks_lock, flags);
-	do_clk_disable(clk);
-	spin_unlock_irqrestore(&clocks_lock, flags);
-}
-EXPORT_SYMBOL(clk_disable);
-
-/**
- * clk_get_rate - obtain the current clock rate (in Hz) for a clock source.
- *		 This is only valid once the clock source has been enabled.
- * @clk: clock source
- */
-unsigned long clk_get_rate(struct clk *clk)
-{
-	unsigned long flags, rate;
-
-	spin_lock_irqsave(&clocks_lock, flags);
-	rate = clk->rate;
-	spin_unlock_irqrestore(&clocks_lock, flags);
-
-	return rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-/**
- * clk_set_parent - set the parent clock source for this clock
- * @clk: clock source
- * @parent: parent clock source
- *
- * Returns success (0) or negative errno.
- */
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
-	int i, found = 0, val = 0;
-	unsigned long flags;
-
-	if (!clk || !parent)
-		return -EFAULT;
-	if (clk->pclk == parent)
-		return 0;
-	if (!clk->pclk_sel)
-		return -EPERM;
-
-	/* check if requested parent is in clk parent list */
-	for (i = 0; i < clk->pclk_sel->pclk_count; i++) {
-		if (clk->pclk_sel->pclk_info[i].pclk == parent) {
-			found = 1;
-			break;
-		}
-	}
-
-	if (!found)
-		return -EINVAL;
-
-	spin_lock_irqsave(&clocks_lock, flags);
-	/* reflect parent change in hardware */
-	val = readl(clk->pclk_sel->pclk_sel_reg);
-	val &= ~(clk->pclk_sel->pclk_sel_mask << clk->pclk_sel_shift);
-	val |= clk->pclk_sel->pclk_info[i].pclk_val << clk->pclk_sel_shift;
-	writel(val, clk->pclk_sel->pclk_sel_reg);
-	spin_unlock_irqrestore(&clocks_lock, flags);
-
-	/* reflect parent change in software */
-	clk_reparent(clk, &clk->pclk_sel->pclk_info[i]);
-
-	propagate_rate(clk, 0);
-	return 0;
-}
-EXPORT_SYMBOL(clk_set_parent);
-
-/**
- * clk_set_rate - set the clock rate for a clock source
- * @clk: clock source
- * @rate: desired clock rate in Hz
- *
- * Returns success (0) or negative errno.
- */
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long flags;
-	int ret = -EINVAL;
-
-	if (!clk || !rate)
-		return -EFAULT;
-
-	if (clk->set_rate) {
-		spin_lock_irqsave(&clocks_lock, flags);
-		ret = clk->set_rate(clk, rate);
-		if (!ret)
-			/* if successful -> propagate */
-			propagate_rate(clk, 0);
-		spin_unlock_irqrestore(&clocks_lock, flags);
-	} else if (clk->pclk) {
-		u32 mult = clk->div_factor ? clk->div_factor : 1;
-		ret = clk_set_rate(clk->pclk, mult * rate);
-	}
-
-	return ret;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-/* registers clock in platform clock framework */
-void clk_register(struct clk_lookup *cl)
-{
-	struct clk *clk;
-	unsigned long flags;
-
-	if (!cl || !cl->clk)
-		return;
-	clk = cl->clk;
-
-	spin_lock_irqsave(&clocks_lock, flags);
-
-	INIT_LIST_HEAD(&clk->children);
-	if (clk->flags & ALWAYS_ENABLED)
-		clk->ops = NULL;
-	else if (!clk->ops)
-		clk->ops = &generic_clkops;
-
-	/* root clock don't have any parents */
-	if (!clk->pclk && !clk->pclk_sel) {
-		list_add(&clk->sibling, &root_clks);
-	} else if (clk->pclk && !clk->pclk_sel) {
-		/* add clocks with only one parent to parent's children list */
-		list_add(&clk->sibling, &clk->pclk->children);
-	} else {
-		/* clocks with more than one parent */
-		struct pclk_info *pclk_info;
-
-		pclk_info = pclk_info_get(clk);
-		if (!pclk_info) {
-			pr_err("CLKDEV: invalid pclk info of clk with"
-					" %s dev_id and %s con_id\n",
-					cl->dev_id, cl->con_id);
-		} else {
-			clk->pclk = pclk_info->pclk;
-			list_add(&clk->sibling, &pclk_info->pclk->children);
-		}
-	}
-
-	spin_unlock_irqrestore(&clocks_lock, flags);
-
-	/* debugfs specific */
-#ifdef CONFIG_DEBUG_FS
-	list_add(&clk->node, &clocks);
-	clk->cl = cl;
-#endif
-
-	/* add clock to arm clockdev framework */
-	clkdev_add(cl);
-}
-
-/**
- * propagate_rate - recalculate and propagate all clocks to children
- * @pclk: parent clock required to be propogated
- * @on_init: flag for enabling clocks which are ENABLED_ON_INIT.
- *
- * Recalculates all children clocks
- */
-void propagate_rate(struct clk *pclk, int on_init)
-{
-	struct clk *clk, *_temp;
-	int ret = 0;
-
-	list_for_each_entry_safe(clk, _temp, &pclk->children, sibling) {
-		if (clk->recalc) {
-			ret = clk->recalc(clk);
-			/*
-			 * recalc will return error if clk out is not programmed
-			 * In this case configure default rate.
-			 */
-			if (ret && clk->set_rate)
-				clk->set_rate(clk, 0);
-		}
-		propagate_rate(clk, on_init);
-
-		if (!on_init)
-			continue;
-
-		/* Enable clks enabled on init, in software view */
-		if (clk->flags & ENABLED_ON_INIT)
-			do_clk_enable(clk);
-	}
-}
-
-/**
- * round_rate_index - return closest programmable rate index in rate_config tbl
- * @clk: ptr to clock structure
- * @drate: desired rate
- * @rate: final rate will be returned in this variable only.
- *
- * Finds index in rate_config for highest clk rate which is less than
- * requested rate. If there is no clk rate lesser than requested rate then
- * -EINVAL is returned. This routine assumes that rate_config is written
- * in incrementing order of clk rates.
- * If drate passed is zero then default rate is programmed.
- */
-static int
-round_rate_index(struct clk *clk, unsigned long drate, unsigned long *rate)
-{
-	unsigned long tmp = 0, prev_rate = 0;
-	int index;
-
-	if (!clk->calc_rate)
-		return -EFAULT;
-
-	if (!drate)
-		return -EINVAL;
-
-	/*
-	 * This loops ends on two conditions:
-	 * - as soon as clk is found with rate greater than requested rate.
-	 * - if all clks in rate_config are smaller than requested rate.
-	 */
-	for (index = 0; index < clk->rate_config.count; index++) {
-		prev_rate = tmp;
-		tmp = clk->calc_rate(clk, index);
-		if (drate < tmp) {
-			index--;
-			break;
-		}
-	}
-	/* return if can't find suitable clock */
-	if (index < 0) {
-		index = -EINVAL;
-		*rate = 0;
-	} else if (index == clk->rate_config.count) {
-		/* program with highest clk rate possible */
-		index = clk->rate_config.count - 1;
-		*rate = tmp;
-	} else
-		*rate = prev_rate;
-
-	return index;
-}
-
-/**
- * clk_round_rate - adjust a rate to the exact rate a clock can provide
- * @clk: clock source
- * @rate: desired clock rate in Hz
- *
- * Returns rounded clock rate in Hz, or negative errno.
- */
-long clk_round_rate(struct clk *clk, unsigned long drate)
-{
-	long rate = 0;
-	int index;
-
-	/*
-	 * propagate call to parent who supports calc_rate. Similar approach is
-	 * used in clk_set_rate.
-	 */
-	if (!clk->calc_rate) {
-		u32 mult;
-		if (!clk->pclk)
-			return clk->rate;
-
-		mult = clk->div_factor ? clk->div_factor : 1;
-		return clk_round_rate(clk->pclk, mult * drate) / mult;
-	}
-
-	index = round_rate_index(clk, drate, &rate);
-	if (index >= 0)
-		return rate;
-	else
-		return index;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-/*All below functions are called with lock held */
-
-/*
- * Calculates pll clk rate for specific value of mode, m, n and p
- *
- * In normal mode
- * rate = (2 * M[15:8] * Fin)/(N * 2^P)
- *
- * In Dithered mode
- * rate = (2 * M[15:0] * Fin)/(256 * N * 2^P)
- */
-unsigned long pll_calc_rate(struct clk *clk, int index)
-{
-	unsigned long rate = clk->pclk->rate;
-	struct pll_rate_tbl *tbls = clk->rate_config.tbls;
-	unsigned int mode;
-
-	mode = tbls[index].mode ? 256 : 1;
-	return (((2 * rate / 10000) * tbls[index].m) /
-			(mode * tbls[index].n * (1 << tbls[index].p))) * 10000;
-}
-
-/*
- * calculates current programmed rate of pll1
- *
- * In normal mode
- * rate = (2 * M[15:8] * Fin)/(N * 2^P)
- *
- * In Dithered mode
- * rate = (2 * M[15:0] * Fin)/(256 * N * 2^P)
- */
-int pll_clk_recalc(struct clk *clk)
-{
-	struct pll_clk_config *config = clk->private_data;
-	unsigned int num = 2, den = 0, val, mode = 0;
-
-	mode = (readl(config->mode_reg) >> config->masks->mode_shift) &
-		config->masks->mode_mask;
-
-	val = readl(config->cfg_reg);
-	/* calculate denominator */
-	den = (val >> config->masks->div_p_shift) & config->masks->div_p_mask;
-	den = 1 << den;
-	den *= (val >> config->masks->div_n_shift) & config->masks->div_n_mask;
-
-	/* calculate numerator & denominator */
-	if (!mode) {
-		/* Normal mode */
-		num *= (val >> config->masks->norm_fdbk_m_shift) &
-			config->masks->norm_fdbk_m_mask;
-	} else {
-		/* Dithered mode */
-		num *= (val >> config->masks->dith_fdbk_m_shift) &
-			config->masks->dith_fdbk_m_mask;
-		den *= 256;
-	}
-
-	if (!den)
-		return -EINVAL;
-
-	clk->rate = (((clk->pclk->rate/10000) * num) / den) * 10000;
-	return 0;
-}
-
-/*
- * Configures new clock rate of pll
- */
-int pll_clk_set_rate(struct clk *clk, unsigned long desired_rate)
-{
-	struct pll_rate_tbl *tbls = clk->rate_config.tbls;
-	struct pll_clk_config *config = clk->private_data;
-	unsigned long val, rate;
-	int i;
-
-	i = round_rate_index(clk, desired_rate, &rate);
-	if (i < 0)
-		return i;
-
-	val = readl(config->mode_reg) &
-		~(config->masks->mode_mask << config->masks->mode_shift);
-	val |= (tbls[i].mode & config->masks->mode_mask) <<
-		config->masks->mode_shift;
-	writel(val, config->mode_reg);
-
-	val = readl(config->cfg_reg) &
-		~(config->masks->div_p_mask << config->masks->div_p_shift);
-	val |= (tbls[i].p & config->masks->div_p_mask) <<
-		config->masks->div_p_shift;
-	val &= ~(config->masks->div_n_mask << config->masks->div_n_shift);
-	val |= (tbls[i].n & config->masks->div_n_mask) <<
-		config->masks->div_n_shift;
-	val &= ~(config->masks->dith_fdbk_m_mask <<
-			config->masks->dith_fdbk_m_shift);
-	if (tbls[i].mode)
-		val |= (tbls[i].m & config->masks->dith_fdbk_m_mask) <<
-			config->masks->dith_fdbk_m_shift;
-	else
-		val |= (tbls[i].m & config->masks->norm_fdbk_m_mask) <<
-			config->masks->norm_fdbk_m_shift;
-
-	writel(val, config->cfg_reg);
-
-	clk->rate = rate;
-
-	return 0;
-}
-
-/*
- * Calculates ahb, apb clk rate for specific value of div
- */
-unsigned long bus_calc_rate(struct clk *clk, int index)
-{
-	unsigned long rate = clk->pclk->rate;
-	struct bus_rate_tbl *tbls = clk->rate_config.tbls;
-
-	return rate / (tbls[index].div + 1);
-}
-
-/* calculates current programmed rate of ahb or apb bus */
-int bus_clk_recalc(struct clk *clk)
-{
-	struct bus_clk_config *config = clk->private_data;
-	unsigned int div;
-
-	div = ((readl(config->reg) >> config->masks->shift) &
-			config->masks->mask) + 1;
-
-	if (!div)
-		return -EINVAL;
-
-	clk->rate = (unsigned long)clk->pclk->rate / div;
-	return 0;
-}
-
-/* Configures new clock rate of AHB OR APB bus */
-int bus_clk_set_rate(struct clk *clk, unsigned long desired_rate)
-{
-	struct bus_rate_tbl *tbls = clk->rate_config.tbls;
-	struct bus_clk_config *config = clk->private_data;
-	unsigned long val, rate;
-	int i;
-
-	i = round_rate_index(clk, desired_rate, &rate);
-	if (i < 0)
-		return i;
-
-	val = readl(config->reg) &
-		~(config->masks->mask << config->masks->shift);
-	val |= (tbls[i].div & config->masks->mask) << config->masks->shift;
-	writel(val, config->reg);
-
-	clk->rate = rate;
-
-	return 0;
-}
-
-/*
- * gives rate for different values of eq, x and y
- *
- * Fout from synthesizer can be given from two equations:
- * Fout1 = (Fin * X/Y)/2		EQ1
- * Fout2 = Fin * X/Y			EQ2
- */
-unsigned long aux_calc_rate(struct clk *clk, int index)
-{
-	unsigned long rate = clk->pclk->rate;
-	struct aux_rate_tbl *tbls = clk->rate_config.tbls;
-	u8 eq = tbls[index].eq ? 1 : 2;
-
-	return (((rate/10000) * tbls[index].xscale) /
-			(tbls[index].yscale * eq)) * 10000;
-}
-
-/*
- * calculates current programmed rate of auxiliary synthesizers
- * used by: UART, FIRDA
- *
- * Fout from synthesizer can be given from two equations:
- * Fout1 = (Fin * X/Y)/2
- * Fout2 = Fin * X/Y
- *
- * Selection of eqn 1 or 2 is programmed in register
- */
-int aux_clk_recalc(struct clk *clk)
-{
-	struct aux_clk_config *config = clk->private_data;
-	unsigned int num = 1, den = 1, val, eqn;
-
-	val = readl(config->synth_reg);
-
-	eqn = (val >> config->masks->eq_sel_shift) &
-		config->masks->eq_sel_mask;
-	if (eqn == config->masks->eq1_mask)
-		den *= 2;
-
-	/* calculate numerator */
-	num = (val >> config->masks->xscale_sel_shift) &
-		config->masks->xscale_sel_mask;
-
-	/* calculate denominator */
-	den *= (val >> config->masks->yscale_sel_shift) &
-		config->masks->yscale_sel_mask;
-
-	if (!den)
-		return -EINVAL;
-
-	clk->rate = (((clk->pclk->rate/10000) * num) / den) * 10000;
-	return 0;
-}
-
-/* Configures new clock rate of auxiliary synthesizers used by: UART, FIRDA*/
-int aux_clk_set_rate(struct clk *clk, unsigned long desired_rate)
-{
-	struct aux_rate_tbl *tbls = clk->rate_config.tbls;
-	struct aux_clk_config *config = clk->private_data;
-	unsigned long val, rate;
-	int i;
-
-	i = round_rate_index(clk, desired_rate, &rate);
-	if (i < 0)
-		return i;
-
-	val = readl(config->synth_reg) &
-		~(config->masks->eq_sel_mask << config->masks->eq_sel_shift);
-	val |= (tbls[i].eq & config->masks->eq_sel_mask) <<
-		config->masks->eq_sel_shift;
-	val &= ~(config->masks->xscale_sel_mask <<
-			config->masks->xscale_sel_shift);
-	val |= (tbls[i].xscale & config->masks->xscale_sel_mask) <<
-		config->masks->xscale_sel_shift;
-	val &= ~(config->masks->yscale_sel_mask <<
-			config->masks->yscale_sel_shift);
-	val |= (tbls[i].yscale & config->masks->yscale_sel_mask) <<
-		config->masks->yscale_sel_shift;
-	writel(val, config->synth_reg);
-
-	clk->rate = rate;
-
-	return 0;
-}
-
-/*
- * Calculates gpt clk rate for different values of mscale and nscale
- *
- * Fout= Fin/((2 ^ (N+1)) * (M+1))
- */
-unsigned long gpt_calc_rate(struct clk *clk, int index)
-{
-	unsigned long rate = clk->pclk->rate;
-	struct gpt_rate_tbl *tbls = clk->rate_config.tbls;
-
-	return rate / ((1 << (tbls[index].nscale + 1)) *
-			(tbls[index].mscale + 1));
-}
-
-/*
- * calculates current programmed rate of gpt synthesizers
- * Fout from synthesizer can be given from below equations:
- * Fout= Fin/((2 ^ (N+1)) * (M+1))
- */
-int gpt_clk_recalc(struct clk *clk)
-{
-	struct gpt_clk_config *config = clk->private_data;
-	unsigned int div = 1, val;
-
-	val = readl(config->synth_reg);
-	div += (val >> config->masks->mscale_sel_shift) &
-		config->masks->mscale_sel_mask;
-	div *= 1 << (((val >> config->masks->nscale_sel_shift) &
-				config->masks->nscale_sel_mask) + 1);
-
-	if (!div)
-		return -EINVAL;
-
-	clk->rate = (unsigned long)clk->pclk->rate / div;
-	return 0;
-}
-
-/* Configures new clock rate of gptiliary synthesizers used by: UART, FIRDA*/
-int gpt_clk_set_rate(struct clk *clk, unsigned long desired_rate)
-{
-	struct gpt_rate_tbl *tbls = clk->rate_config.tbls;
-	struct gpt_clk_config *config = clk->private_data;
-	unsigned long val, rate;
-	int i;
-
-	i = round_rate_index(clk, desired_rate, &rate);
-	if (i < 0)
-		return i;
-
-	val = readl(config->synth_reg) & ~(config->masks->mscale_sel_mask <<
-			config->masks->mscale_sel_shift);
-	val |= (tbls[i].mscale & config->masks->mscale_sel_mask) <<
-		config->masks->mscale_sel_shift;
-	val &= ~(config->masks->nscale_sel_mask <<
-			config->masks->nscale_sel_shift);
-	val |= (tbls[i].nscale & config->masks->nscale_sel_mask) <<
-		config->masks->nscale_sel_shift;
-	writel(val, config->synth_reg);
-
-	clk->rate = rate;
-
-	return 0;
-}
-
-/*
- * Calculates clcd clk rate for different values of div
- *
- * Fout from synthesizer can be given from below equation:
- * Fout= Fin/2*div (division factor)
- * div is 17 bits:-
- *	0-13 (fractional part)
- *	14-16 (integer part)
- * To calculate Fout we left shift val by 14 bits and divide Fin by
- * complete div (including fractional part) and then right shift the
- * result by 14 places.
- */
-unsigned long clcd_calc_rate(struct clk *clk, int index)
-{
-	unsigned long rate = clk->pclk->rate;
-	struct clcd_rate_tbl *tbls = clk->rate_config.tbls;
-
-	rate /= 1000;
-	rate <<= 12;
-	rate /= (2 * tbls[index].div);
-	rate >>= 12;
-	rate *= 1000;
-
-	return rate;
-}
-
-/*
- * calculates current programmed rate of clcd synthesizer
- * Fout from synthesizer can be given from below equation:
- * Fout= Fin/2*div (division factor)
- * div is 17 bits:-
- *	0-13 (fractional part)
- *	14-16 (integer part)
- * To calculate Fout we left shift val by 14 bits and divide Fin by
- * complete div (including fractional part) and then right shift the
- * result by 14 places.
- */
-int clcd_clk_recalc(struct clk *clk)
-{
-	struct clcd_clk_config *config = clk->private_data;
-	unsigned int div = 1;
-	unsigned long prate;
-	unsigned int val;
-
-	val = readl(config->synth_reg);
-	div = (val >> config->masks->div_factor_shift) &
-		config->masks->div_factor_mask;
-
-	if (!div)
-		return -EINVAL;
-
-	prate = clk->pclk->rate / 1000; /* first level division, make it KHz */
-
-	clk->rate = (((unsigned long)prate << 12) / (2 * div)) >> 12;
-	clk->rate *= 1000;
-	return 0;
-}
-
-/* Configures new clock rate of auxiliary synthesizers used by: UART, FIRDA*/
-int clcd_clk_set_rate(struct clk *clk, unsigned long desired_rate)
-{
-	struct clcd_rate_tbl *tbls = clk->rate_config.tbls;
-	struct clcd_clk_config *config = clk->private_data;
-	unsigned long val, rate;
-	int i;
-
-	i = round_rate_index(clk, desired_rate, &rate);
-	if (i < 0)
-		return i;
-
-	val = readl(config->synth_reg) & ~(config->masks->div_factor_mask <<
-			config->masks->div_factor_shift);
-	val |= (tbls[i].div & config->masks->div_factor_mask) <<
-		config->masks->div_factor_shift;
-	writel(val, config->synth_reg);
-
-	clk->rate = rate;
-
-	return 0;
-}
-
-/*
- * Used for clocks that always have value as the parent clock divided by a
- * fixed divisor
- */
-int follow_parent(struct clk *clk)
-{
-	unsigned int div_factor = (clk->div_factor < 1) ? 1 : clk->div_factor;
-
-	clk->rate = clk->pclk->rate/div_factor;
-	return 0;
-}
-
-/**
- * recalc_root_clocks - recalculate and propagate all root clocks
- *
- * Recalculates all root clocks (clocks with no parent), which if the
- * clock's .recalc is set correctly, should also propagate their rates.
- */
-void recalc_root_clocks(void)
-{
-	struct clk *pclk;
-	unsigned long flags;
-	int ret = 0;
-
-	spin_lock_irqsave(&clocks_lock, flags);
-	list_for_each_entry(pclk, &root_clks, sibling) {
-		if (pclk->recalc) {
-			ret = pclk->recalc(pclk);
-			/*
-			 * recalc will return error if clk out is not programmed
-			 * In this case configure default clock.
-			 */
-			if (ret && pclk->set_rate)
-				pclk->set_rate(pclk, 0);
-		}
-		propagate_rate(pclk, 1);
-		/* Enable clks enabled on init, in software view */
-		if (pclk->flags & ENABLED_ON_INIT)
-			do_clk_enable(pclk);
-	}
-	spin_unlock_irqrestore(&clocks_lock, flags);
-}
-
-void __init clk_init(void)
-{
-	recalc_root_clocks();
-}
-
-#ifdef CONFIG_DEBUG_FS
-/*
- *	debugfs support to trace clock tree hierarchy and attributes
- */
-static struct dentry *clk_debugfs_root;
-static int clk_debugfs_register_one(struct clk *c)
-{
-	int err;
-	struct dentry *d;
-	struct clk *pa = c->pclk;
-	char s[255];
-	char *p = s;
-
-	if (c) {
-		if (c->cl->con_id)
-			p += sprintf(p, "%s", c->cl->con_id);
-		if (c->cl->dev_id)
-			p += sprintf(p, "%s", c->cl->dev_id);
-	}
-	d = debugfs_create_dir(s, pa ? pa->dent : clk_debugfs_root);
-	if (!d)
-		return -ENOMEM;
-	c->dent = d;
-
-	d = debugfs_create_u32("usage_count", S_IRUGO, c->dent,
-			(u32 *)&c->usage_count);
-	if (!d) {
-		err = -ENOMEM;
-		goto err_out;
-	}
-	d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate);
-	if (!d) {
-		err = -ENOMEM;
-		goto err_out;
-	}
-	d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags);
-	if (!d) {
-		err = -ENOMEM;
-		goto err_out;
-	}
-	return 0;
-
-err_out:
-	debugfs_remove_recursive(c->dent);
-	return err;
-}
-
-static int clk_debugfs_register(struct clk *c)
-{
-	int err;
-	struct clk *pa = c->pclk;
-
-	if (pa && !pa->dent) {
-		err = clk_debugfs_register(pa);
-		if (err)
-			return err;
-	}
-
-	if (!c->dent) {
-		err = clk_debugfs_register_one(c);
-		if (err)
-			return err;
-	}
-	return 0;
-}
-
-static int __init clk_debugfs_init(void)
-{
-	struct clk *c;
-	struct dentry *d;
-	int err;
-
-	d = debugfs_create_dir("clock", NULL);
-	if (!d)
-		return -ENOMEM;
-	clk_debugfs_root = d;
-
-	list_for_each_entry(c, &clocks, node) {
-		err = clk_debugfs_register(c);
-		if (err)
-			goto err_out;
-	}
-	return 0;
-err_out:
-	debugfs_remove_recursive(clk_debugfs_root);
-	return err;
-}
-late_initcall(clk_debugfs_init);
-
-static int clk_debugfs_reparent(struct clk *c)
-{
-	debugfs_remove(c->dent);
-	return clk_debugfs_register_one(c);
-}
-#endif /* CONFIG_DEBUG_FS */
diff --git a/arch/arm/plat-spear/include/plat/clock.h b/arch/arm/plat-spear/include/plat/clock.h
deleted file mode 100644
index 0062bafef12d..000000000000
--- a/arch/arm/plat-spear/include/plat/clock.h
+++ /dev/null
@@ -1,249 +0,0 @@
-/*
- * arch/arm/plat-spear/include/plat/clock.h
- *
- * Clock framework definitions for SPEAr platform
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_CLOCK_H
-#define __PLAT_CLOCK_H
-
-#include <linux/list.h>
-#include <linux/clkdev.h>
-#include <linux/types.h>
-
-/* clk structure flags */
-#define	ALWAYS_ENABLED		(1 << 0) /* clock always enabled */
-#define	RESET_TO_ENABLE		(1 << 1) /* reset register bit to enable clk */
-#define	ENABLED_ON_INIT		(1 << 2) /* clocks enabled at init */
-
-/**
- * struct clkops - clock operations
- * @enable: pointer to clock enable function
- * @disable: pointer to clock disable function
- */
-struct clkops {
-	int (*enable) (struct clk *);
-	void (*disable) (struct clk *);
-};
-
-/**
- * struct pclk_info - parents info
- * @pclk: pointer to parent clk
- * @pclk_val: value to be written for selecting this parent
- */
-struct pclk_info {
-	struct clk *pclk;
-	u8 pclk_val;
-};
-
-/**
- * struct pclk_sel - parents selection configuration
- * @pclk_info: pointer to array of parent clock info
- * @pclk_count: number of parents
- * @pclk_sel_reg: register for selecting a parent
- * @pclk_sel_mask: mask for selecting parent (can be used to clear bits also)
- */
-struct pclk_sel {
-	struct pclk_info *pclk_info;
-	u8 pclk_count;
-	void __iomem *pclk_sel_reg;
-	unsigned int pclk_sel_mask;
-};
-
-/**
- * struct rate_config - clk rate configurations
- * @tbls: array of device specific clk rate tables, in ascending order of rates
- * @count: size of tbls array
- * @default_index: default setting when originally disabled
- */
-struct rate_config {
-	void *tbls;
-	u8 count;
-	u8 default_index;
-};
-
-/**
- * struct clk - clock structure
- * @usage_count: num of users who enabled this clock
- * @flags: flags for clock properties
- * @rate: programmed clock rate in Hz
- * @en_reg: clk enable/disable reg
- * @en_reg_bit: clk enable/disable bit
- * @ops: clk enable/disable ops - generic_clkops selected if NULL
- * @recalc: pointer to clock rate recalculate function
- * @set_rate: pointer to clock set rate function
- * @calc_rate: pointer to clock get rate function for index
- * @rate_config: rate configuration information, used by set_rate
- * @div_factor: division factor to parent clock.
- * @pclk: current parent clk
- * @pclk_sel: pointer to parent selection structure
- * @pclk_sel_shift: register shift for selecting parent of this clock
- * @children: list for childrens or this clock
- * @sibling: node for list of clocks having same parents
- * @private_data: clock specific private data
- * @node: list to maintain clocks linearly
- * @cl: clocklook up associated with this clock
- * @dent: object for debugfs
- */
-struct clk {
-	unsigned int usage_count;
-	unsigned int flags;
-	unsigned long rate;
-	void __iomem *en_reg;
-	u8 en_reg_bit;
-	const struct clkops *ops;
-	int (*recalc) (struct clk *);
-	int (*set_rate) (struct clk *, unsigned long rate);
-	unsigned long (*calc_rate)(struct clk *, int index);
-	struct rate_config rate_config;
-	unsigned int div_factor;
-
-	struct clk *pclk;
-	struct pclk_sel *pclk_sel;
-	unsigned int pclk_sel_shift;
-
-	struct list_head children;
-	struct list_head sibling;
-	void *private_data;
-#ifdef CONFIG_DEBUG_FS
-	struct list_head node;
-	struct clk_lookup *cl;
-	struct dentry *dent;
-#endif
-};
-
-/* pll configuration structure */
-struct pll_clk_masks {
-	u32 mode_mask;
-	u32 mode_shift;
-
-	u32 norm_fdbk_m_mask;
-	u32 norm_fdbk_m_shift;
-	u32 dith_fdbk_m_mask;
-	u32 dith_fdbk_m_shift;
-	u32 div_p_mask;
-	u32 div_p_shift;
-	u32 div_n_mask;
-	u32 div_n_shift;
-};
-
-struct pll_clk_config {
-	void __iomem *mode_reg;
-	void __iomem *cfg_reg;
-	struct pll_clk_masks *masks;
-};
-
-/* pll clk rate config structure */
-struct pll_rate_tbl {
-	u8 mode;
-	u16 m;
-	u8 n;
-	u8 p;
-};
-
-/* ahb and apb bus configuration structure */
-struct bus_clk_masks {
-	u32 mask;
-	u32 shift;
-};
-
-struct bus_clk_config {
-	void __iomem *reg;
-	struct bus_clk_masks *masks;
-};
-
-/* ahb and apb clk bus rate config structure */
-struct bus_rate_tbl {
-	u8 div;
-};
-
-/* Aux clk configuration structure: applicable to UART and FIRDA */
-struct aux_clk_masks {
-	u32 eq_sel_mask;
-	u32 eq_sel_shift;
-	u32 eq1_mask;
-	u32 eq2_mask;
-	u32 xscale_sel_mask;
-	u32 xscale_sel_shift;
-	u32 yscale_sel_mask;
-	u32 yscale_sel_shift;
-};
-
-struct aux_clk_config {
-	void __iomem *synth_reg;
-	struct aux_clk_masks *masks;
-};
-
-/* aux clk rate config structure */
-struct aux_rate_tbl {
-	u16 xscale;
-	u16 yscale;
-	u8 eq;
-};
-
-/* GPT clk configuration structure */
-struct gpt_clk_masks {
-	u32 mscale_sel_mask;
-	u32 mscale_sel_shift;
-	u32 nscale_sel_mask;
-	u32 nscale_sel_shift;
-};
-
-struct gpt_clk_config {
-	void __iomem *synth_reg;
-	struct gpt_clk_masks *masks;
-};
-
-/* gpt clk rate config structure */
-struct gpt_rate_tbl {
-	u16 mscale;
-	u16 nscale;
-};
-
-/* clcd clk configuration structure */
-struct clcd_synth_masks {
-	u32 div_factor_mask;
-	u32 div_factor_shift;
-};
-
-struct clcd_clk_config {
-	void __iomem *synth_reg;
-	struct clcd_synth_masks *masks;
-};
-
-/* clcd clk rate config structure */
-struct clcd_rate_tbl {
-	u16 div;
-};
-
-/* platform specific clock functions */
-void __init clk_init(void);
-void clk_register(struct clk_lookup *cl);
-void recalc_root_clocks(void);
-
-/* clock recalc & set rate functions */
-int follow_parent(struct clk *clk);
-unsigned long pll_calc_rate(struct clk *clk, int index);
-int pll_clk_recalc(struct clk *clk);
-int pll_clk_set_rate(struct clk *clk, unsigned long desired_rate);
-unsigned long bus_calc_rate(struct clk *clk, int index);
-int bus_clk_recalc(struct clk *clk);
-int bus_clk_set_rate(struct clk *clk, unsigned long desired_rate);
-unsigned long gpt_calc_rate(struct clk *clk, int index);
-int gpt_clk_recalc(struct clk *clk);
-int gpt_clk_set_rate(struct clk *clk, unsigned long desired_rate);
-unsigned long aux_calc_rate(struct clk *clk, int index);
-int aux_clk_recalc(struct clk *clk);
-int aux_clk_set_rate(struct clk *clk, unsigned long desired_rate);
-unsigned long clcd_calc_rate(struct clk *clk, int index);
-int clcd_clk_recalc(struct clk *clk);
-int clcd_clk_set_rate(struct clk *clk, unsigned long desired_rate);
-
-#endif /* __PLAT_CLOCK_H */
diff --git a/arch/arm/plat-spear/include/plat/debug-macro.S b/arch/arm/plat-spear/include/plat/debug-macro.S
index 02b160a1ec9b..ab3de721c5db 100644
--- a/arch/arm/plat-spear/include/plat/debug-macro.S
+++ b/arch/arm/plat-spear/include/plat/debug-macro.S
@@ -12,7 +12,7 @@
  */
 
 #include <linux/amba/serial.h>
-#include <mach/hardware.h>
+#include <mach/spear.h>
 
 		.macro	addruart, rp, rv, tmp
 		mov	\rp, #SPEAR_DBG_UART_BASE		@ Physical base
diff --git a/arch/arm/plat-spear/include/plat/hardware.h b/arch/arm/plat-spear/include/plat/hardware.h
deleted file mode 100644
index 70187d763e26..000000000000
--- a/arch/arm/plat-spear/include/plat/hardware.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * arch/arm/plat-spear/include/plat/hardware.h
- *
- * Hardware definitions for SPEAr
- *
- * Copyright (C) 2010 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_HARDWARE_H
-#define __PLAT_HARDWARE_H
-
-#endif /* __PLAT_HARDWARE_H */
diff --git a/arch/arm/plat-spear/include/plat/padmux.h b/arch/arm/plat-spear/include/plat/padmux.h
deleted file mode 100644
index 877f3adcf610..000000000000
--- a/arch/arm/plat-spear/include/plat/padmux.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * arch/arm/plat-spear/include/plat/padmux.h
- *
- * SPEAr platform specific gpio pads muxing file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_PADMUX_H
-#define __PLAT_PADMUX_H
-
-#include <linux/types.h>
-
-/*
- * struct pmx_reg: configuration structure for mode reg and mux reg
- *
- * offset: offset of mode reg
- * mask: mask of mode reg
- */
-struct pmx_reg {
-	u32 offset;
-	u32 mask;
-};
-
-/*
- * struct pmx_dev_mode: configuration structure every group of modes of a device
- *
- * ids: all modes for this configuration
- * mask: mask for supported mode
- */
-struct pmx_dev_mode {
-	u32 ids;
-	u32 mask;
-};
-
-/*
- * struct pmx_mode: mode definition structure
- *
- * name: mode name
- * mask: mode mask
- */
-struct pmx_mode {
-	char *name;
-	u32 id;
-	u32 mask;
-};
-
-/*
- * struct pmx_dev: device definition structure
- *
- * name: device name
- * modes: device configuration array for different modes supported
- * mode_count: size of modes array
- * is_active: is peripheral active/enabled
- * enb_on_reset: if 1, mask bits to be cleared in reg otherwise to be set in reg
- */
-struct pmx_dev {
-	char *name;
-	struct pmx_dev_mode *modes;
-	u8 mode_count;
-	bool is_active;
-	bool enb_on_reset;
-};
-
-/*
- * struct pmx_driver: driver definition structure
- *
- * mode: mode to be set
- * devs: array of pointer to pmx devices
- * devs_count: ARRAY_SIZE of devs
- * base: base address of soc config registers
- * mode_reg: structure of mode config register
- * mux_reg: structure of device mux config register
- */
-struct pmx_driver {
-	struct pmx_mode *mode;
-	struct pmx_dev **devs;
-	u8 devs_count;
-	u32 *base;
-	struct pmx_reg mode_reg;
-	struct pmx_reg mux_reg;
-};
-
-/* pmx functions */
-int pmx_register(struct pmx_driver *driver);
-
-#endif /* __PLAT_PADMUX_H */
diff --git a/arch/arm/plat-spear/include/plat/pl080.h b/arch/arm/plat-spear/include/plat/pl080.h
new file mode 100644
index 000000000000..e14a3e4932f9
--- /dev/null
+++ b/arch/arm/plat-spear/include/plat/pl080.h
@@ -0,0 +1,21 @@
+/*
+ * arch/arm/plat-spear/include/plat/pl080.h
+ *
+ * DMAC pl080 definitions for SPEAr platform
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_PL080_H
+#define __PLAT_PL080_H
+
+struct pl08x_dma_chan;
+int pl080_get_signal(struct pl08x_dma_chan *ch);
+void pl080_put_signal(struct pl08x_dma_chan *ch);
+
+#endif /* __PLAT_PL080_H */
diff --git a/arch/arm/plat-spear/include/plat/uncompress.h b/arch/arm/plat-spear/include/plat/uncompress.h
index 1bf84527aee4..6dd455bafdfd 100644
--- a/arch/arm/plat-spear/include/plat/uncompress.h
+++ b/arch/arm/plat-spear/include/plat/uncompress.h
@@ -13,7 +13,7 @@
 
 #include <linux/io.h>
 #include <linux/amba/serial.h>
-#include <mach/hardware.h>
+#include <mach/spear.h>
 
 #ifndef __PLAT_UNCOMPRESS_H
 #define __PLAT_UNCOMPRESS_H
diff --git a/arch/arm/plat-spear/padmux.c b/arch/arm/plat-spear/padmux.c
deleted file mode 100644
index 555eec6dc1cb..000000000000
--- a/arch/arm/plat-spear/padmux.c
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- * arch/arm/plat-spear/include/plat/padmux.c
- *
- * SPEAr platform specific gpio pads muxing source file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <plat/padmux.h>
-
-/*
- * struct pmx: pmx definition structure
- *
- * base: base address of configuration registers
- * mode_reg: mode configurations
- * mux_reg: muxing configurations
- * active_mode: pointer to current active mode
- */
-struct pmx {
-	u32 base;
-	struct pmx_reg mode_reg;
-	struct pmx_reg mux_reg;
-	struct pmx_mode *active_mode;
-};
-
-static struct pmx *pmx;
-
-/**
- * pmx_mode_set - Enables an multiplexing mode
- * @mode - pointer to pmx mode
- *
- * It will set mode of operation in hardware.
- * Returns -ve on Err otherwise 0
- */
-static int pmx_mode_set(struct pmx_mode *mode)
-{
-	u32 val;
-
-	if (!mode->name)
-		return -EFAULT;
-
-	pmx->active_mode = mode;
-
-	val = readl(pmx->base + pmx->mode_reg.offset);
-	val &= ~pmx->mode_reg.mask;
-	val |= mode->mask & pmx->mode_reg.mask;
-	writel(val, pmx->base + pmx->mode_reg.offset);
-
-	return 0;
-}
-
-/**
- * pmx_devs_enable - Enables list of devices
- * @devs - pointer to pmx device array
- * @count - number of devices to enable
- *
- * It will enable pads for all required peripherals once and only once.
- * If peripheral is not supported by current mode then request is rejected.
- * Conflicts between peripherals are not handled and peripherals will be
- * enabled in the order they are present in pmx_dev array.
- * In case of conflicts last peripheral enabled will be present.
- * Returns -ve on Err otherwise 0
- */
-static int pmx_devs_enable(struct pmx_dev **devs, u8 count)
-{
-	u32 val, i, mask;
-
-	if (!count)
-		return -EINVAL;
-
-	val = readl(pmx->base + pmx->mux_reg.offset);
-	for (i = 0; i < count; i++) {
-		u8 j = 0;
-
-		if (!devs[i]->name || !devs[i]->modes) {
-			printk(KERN_ERR "padmux: dev name or modes is null\n");
-			continue;
-		}
-		/* check if peripheral exists in active mode */
-		if (pmx->active_mode) {
-			bool found = false;
-			for (j = 0; j < devs[i]->mode_count; j++) {
-				if (devs[i]->modes[j].ids &
-						pmx->active_mode->id) {
-					found = true;
-					break;
-				}
-			}
-			if (found == false) {
-				printk(KERN_ERR "%s device not available in %s"\
-						"mode\n", devs[i]->name,
-						pmx->active_mode->name);
-				continue;
-			}
-		}
-
-		/* enable peripheral */
-		mask = devs[i]->modes[j].mask & pmx->mux_reg.mask;
-		if (devs[i]->enb_on_reset)
-			val &= ~mask;
-		else
-			val |= mask;
-
-		devs[i]->is_active = true;
-	}
-	writel(val, pmx->base + pmx->mux_reg.offset);
-	kfree(pmx);
-
-	/* this will ensure that multiplexing can't be changed now */
-	pmx = (struct pmx *)-1;
-
-	return 0;
-}
-
-/**
- * pmx_register - registers a platform requesting pad mux feature
- * @driver - pointer to driver structure containing driver specific parameters
- *
- * Also this must be called only once. This will allocate memory for pmx
- * structure, will call pmx_mode_set, will call pmx_devs_enable.
- * Returns -ve on Err otherwise 0
- */
-int pmx_register(struct pmx_driver *driver)
-{
-	int ret = 0;
-
-	if (pmx)
-		return -EPERM;
-	if (!driver->base || !driver->devs)
-		return -EFAULT;
-
-	pmx = kzalloc(sizeof(*pmx), GFP_KERNEL);
-	if (!pmx)
-		return -ENOMEM;
-
-	pmx->base = (u32)driver->base;
-	pmx->mode_reg.offset = driver->mode_reg.offset;
-	pmx->mode_reg.mask = driver->mode_reg.mask;
-	pmx->mux_reg.offset = driver->mux_reg.offset;
-	pmx->mux_reg.mask = driver->mux_reg.mask;
-
-	/* choose mode to enable */
-	if (driver->mode) {
-		ret = pmx_mode_set(driver->mode);
-		if (ret)
-			goto pmx_fail;
-	}
-	ret = pmx_devs_enable(driver->devs, driver->devs_count);
-	if (ret)
-		goto pmx_fail;
-
-	return 0;
-
-pmx_fail:
-	return ret;
-}
diff --git a/arch/arm/plat-spear/pl080.c b/arch/arm/plat-spear/pl080.c
new file mode 100644
index 000000000000..a56a067717c1
--- /dev/null
+++ b/arch/arm/plat-spear/pl080.c
@@ -0,0 +1,80 @@
+/*
+ * arch/arm/plat-spear/pl080.c
+ *
+ * DMAC pl080 definitions for SPEAr platform
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/amba/pl08x.h>
+#include <linux/amba/bus.h>
+#include <linux/bug.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/spinlock_types.h>
+#include <mach/spear.h>
+#include <mach/misc_regs.h>
+
+static spinlock_t lock = __SPIN_LOCK_UNLOCKED(x);
+
+struct {
+	unsigned char busy;
+	unsigned char val;
+} signals[16] = {{0, 0}, };
+
+int pl080_get_signal(struct pl08x_dma_chan *ch)
+{
+	const struct pl08x_channel_data *cd = ch->cd;
+	unsigned int signal = cd->min_signal, val;
+	unsigned long flags;
+
+	spin_lock_irqsave(&lock, flags);
+
+	/* Return if signal is already acquired by somebody else */
+	if (signals[signal].busy &&
+			(signals[signal].val != cd->muxval)) {
+		spin_unlock_irqrestore(&lock, flags);
+		return -EBUSY;
+	}
+
+	/* If acquiring for the first time, configure it */
+	if (!signals[signal].busy) {
+		val = readl(DMA_CHN_CFG);
+
+		/*
+		 * Each request line has two bits in DMA_CHN_CFG register. To
+		 * goto the bits of current request line, do left shift of
+		 * value by 2 * signal number.
+		 */
+		val &= ~(0x3 << (signal * 2));
+		val |= cd->muxval << (signal * 2);
+		writel(val, DMA_CHN_CFG);
+	}
+
+	signals[signal].busy++;
+	signals[signal].val = cd->muxval;
+	spin_unlock_irqrestore(&lock, flags);
+
+	return signal;
+}
+
+void pl080_put_signal(struct pl08x_dma_chan *ch)
+{
+	const struct pl08x_channel_data *cd = ch->cd;
+	unsigned long flags;
+
+	spin_lock_irqsave(&lock, flags);
+
+	/* if signal is not used */
+	if (!signals[cd->min_signal].busy)
+		BUG();
+
+	signals[cd->min_signal].busy--;
+
+	spin_unlock_irqrestore(&lock, flags);
+}
diff --git a/arch/arm/plat-spear/restart.c b/arch/arm/plat-spear/restart.c
index 16f203e78d89..ea0a61302b7e 100644
--- a/arch/arm/plat-spear/restart.c
+++ b/arch/arm/plat-spear/restart.c
@@ -13,9 +13,10 @@
 #include <linux/io.h>
 #include <asm/system_misc.h>
 #include <asm/hardware/sp810.h>
-#include <mach/hardware.h>
+#include <mach/spear.h>
 #include <mach/generic.h>
 
+#define SPEAR13XX_SYS_SW_RES			(VA_MISC_BASE + 0x204)
 void spear_restart(char mode, const char *cmd)
 {
 	if (mode == 's') {
@@ -23,6 +24,10 @@ void spear_restart(char mode, const char *cmd)
 		soft_restart(0);
 	} else {
 		/* hardware reset, Use on-chip reset capability */
+#ifdef CONFIG_ARCH_SPEAR13XX
+		writel_relaxed(0x01, SPEAR13XX_SYS_SW_RES);
+#else
 		sysctl_soft_reset((void __iomem *)VA_SPEAR_SYS_CTRL_BASE);
+#endif
 	}
 }
diff --git a/arch/arm/plat-spear/time.c b/arch/arm/plat-spear/time.c
index abb5bdecd509..03321af5de9f 100644
--- a/arch/arm/plat-spear/time.c
+++ b/arch/arm/plat-spear/time.c
@@ -15,14 +15,15 @@
 #include <linux/err.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/ioport.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
 #include <linux/time.h>
 #include <linux/irq.h>
 #include <asm/mach/time.h>
 #include <mach/generic.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
 
 /*
  * We would use TIMER0 and TIMER1 as clockevent and clocksource.
@@ -175,7 +176,7 @@ static struct irqaction spear_timer_irq = {
 	.handler = spear_timer_interrupt
 };
 
-static void __init spear_clockevent_init(void)
+static void __init spear_clockevent_init(int irq)
 {
 	u32 tick_rate;
 
@@ -195,22 +196,35 @@ static void __init spear_clockevent_init(void)
 
 	clockevents_register_device(&clkevt);
 
-	setup_irq(SPEAR_GPT0_CHAN0_IRQ, &spear_timer_irq);
+	setup_irq(irq, &spear_timer_irq);
 }
 
-void __init spear_setup_timer(void)
+const static struct of_device_id timer_of_match[] __initconst = {
+	{ .compatible = "st,spear-timer", },
+	{ },
+};
+
+void __init spear_setup_of_timer(void)
 {
-	int ret;
+	struct device_node *np;
+	int irq, ret;
+
+	np = of_find_matching_node(NULL, timer_of_match);
+	if (!np) {
+		pr_err("%s: No timer passed via DT\n", __func__);
+		return;
+	}
 
-	if (!request_mem_region(SPEAR_GPT0_BASE, SZ_1K, "gpt0")) {
-		pr_err("%s:cannot get IO addr\n", __func__);
+	irq = irq_of_parse_and_map(np, 0);
+	if (!irq) {
+		pr_err("%s: No irq passed for timer via DT\n", __func__);
 		return;
 	}
 
-	gpt_base = (void __iomem *)ioremap(SPEAR_GPT0_BASE, SZ_1K);
+	gpt_base = of_iomap(np, 0);
 	if (!gpt_base) {
-		pr_err("%s:ioremap failed for gpt\n", __func__);
-		goto err_mem;
+		pr_err("%s: of iomap failed\n", __func__);
+		return;
 	}
 
 	gpt_clk = clk_get_sys("gpt0", NULL);
@@ -219,21 +233,19 @@ void __init spear_setup_timer(void)
 		goto err_iomap;
 	}
 
-	ret = clk_enable(gpt_clk);
+	ret = clk_prepare_enable(gpt_clk);
 	if (ret < 0) {
-		pr_err("%s:couldn't enable gpt clock\n", __func__);
-		goto err_clk;
+		pr_err("%s:couldn't prepare-enable gpt clock\n", __func__);
+		goto err_prepare_enable_clk;
 	}
 
-	spear_clockevent_init();
+	spear_clockevent_init(irq);
 	spear_clocksource_init();
 
 	return;
 
-err_clk:
+err_prepare_enable_clk:
 	clk_put(gpt_clk);
 err_iomap:
 	iounmap(gpt_base);
-err_mem:
-	release_mem_region(SPEAR_GPT0_BASE, SZ_1K);
 }
diff --git a/arch/arm/plat-versatile/Kconfig b/arch/arm/plat-versatile/Kconfig
index 043f7b02a9e7..81ee7cc34457 100644
--- a/arch/arm/plat-versatile/Kconfig
+++ b/arch/arm/plat-versatile/Kconfig
@@ -5,6 +5,12 @@ config PLAT_VERSATILE_CLCD
 
 config PLAT_VERSATILE_FPGA_IRQ
 	bool
+	select IRQ_DOMAIN
+
+config PLAT_VERSATILE_FPGA_IRQ_NR
+       int
+       default 4
+       depends on PLAT_VERSATILE_FPGA_IRQ
 
 config PLAT_VERSATILE_LEDS
 	def_bool y if LEDS_CLASS
diff --git a/arch/arm/plat-versatile/fpga-irq.c b/arch/arm/plat-versatile/fpga-irq.c
index f0cc8e19b094..6e70d03824a1 100644
--- a/arch/arm/plat-versatile/fpga-irq.c
+++ b/arch/arm/plat-versatile/fpga-irq.c
@@ -3,7 +3,10 @@
  */
 #include <linux/irq.h>
 #include <linux/io.h>
+#include <linux/irqdomain.h>
+#include <linux/module.h>
 
+#include <asm/exception.h>
 #include <asm/mach/irq.h>
 #include <plat/fpga-irq.h>
 
@@ -12,10 +15,32 @@
 #define IRQ_ENABLE_SET		0x08
 #define IRQ_ENABLE_CLEAR	0x0c
 
+/**
+ * struct fpga_irq_data - irq data container for the FPGA IRQ controller
+ * @base: memory offset in virtual memory
+ * @irq_start: first IRQ number handled by this instance
+ * @chip: chip container for this instance
+ * @domain: IRQ domain for this instance
+ * @valid: mask for valid IRQs on this controller
+ * @used_irqs: number of active IRQs on this controller
+ */
+struct fpga_irq_data {
+	void __iomem *base;
+	unsigned int irq_start;
+	struct irq_chip chip;
+	u32 valid;
+	struct irq_domain *domain;
+	u8 used_irqs;
+};
+
+/* we cannot allocate memory when the controllers are initially registered */
+static struct fpga_irq_data fpga_irq_devices[CONFIG_PLAT_VERSATILE_FPGA_IRQ_NR];
+static int fpga_irq_id;
+
 static void fpga_irq_mask(struct irq_data *d)
 {
 	struct fpga_irq_data *f = irq_data_get_irq_chip_data(d);
-	u32 mask = 1 << (d->irq - f->irq_start);
+	u32 mask = 1 << d->hwirq;
 
 	writel(mask, f->base + IRQ_ENABLE_CLEAR);
 }
@@ -23,7 +48,7 @@ static void fpga_irq_mask(struct irq_data *d)
 static void fpga_irq_unmask(struct irq_data *d)
 {
 	struct fpga_irq_data *f = irq_data_get_irq_chip_data(d);
-	u32 mask = 1 << (d->irq - f->irq_start);
+	u32 mask = 1 << d->hwirq;
 
 	writel(mask, f->base + IRQ_ENABLE_SET);
 }
@@ -41,32 +66,93 @@ static void fpga_irq_handle(unsigned int irq, struct irq_desc *desc)
 	do {
 		irq = ffs(status) - 1;
 		status &= ~(1 << irq);
-
-		generic_handle_irq(irq + f->irq_start);
+		generic_handle_irq(irq_find_mapping(f->domain, irq));
 	} while (status);
 }
 
-void __init fpga_irq_init(int parent_irq, u32 valid, struct fpga_irq_data *f)
+/*
+ * Handle each interrupt in a single FPGA IRQ controller.  Returns non-zero
+ * if we've handled at least one interrupt.  This does a single read of the
+ * status register and handles all interrupts in order from LSB first.
+ */
+static int handle_one_fpga(struct fpga_irq_data *f, struct pt_regs *regs)
+{
+	int handled = 0;
+	int irq;
+	u32 status;
+
+	while ((status  = readl(f->base + IRQ_STATUS))) {
+		irq = ffs(status) - 1;
+		handle_IRQ(irq_find_mapping(f->domain, irq), regs);
+		handled = 1;
+	}
+
+	return handled;
+}
+
+/*
+ * Keep iterating over all registered FPGA IRQ controllers until there are
+ * no pending interrupts.
+ */
+asmlinkage void __exception_irq_entry fpga_handle_irq(struct pt_regs *regs)
 {
-	unsigned int i;
+	int i, handled;
 
+	do {
+		for (i = 0, handled = 0; i < fpga_irq_id; ++i)
+			handled |= handle_one_fpga(&fpga_irq_devices[i], regs);
+	} while (handled);
+}
+
+static int fpga_irqdomain_map(struct irq_domain *d, unsigned int irq,
+		irq_hw_number_t hwirq)
+{
+	struct fpga_irq_data *f = d->host_data;
+
+	/* Skip invalid IRQs, only register handlers for the real ones */
+	if (!(f->valid & (1 << hwirq)))
+		return -ENOTSUPP;
+	irq_set_chip_data(irq, f);
+	irq_set_chip_and_handler(irq, &f->chip,
+				handle_level_irq);
+	set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+	f->used_irqs++;
+	return 0;
+}
+
+static struct irq_domain_ops fpga_irqdomain_ops = {
+	.map = fpga_irqdomain_map,
+	.xlate = irq_domain_xlate_onetwocell,
+};
+
+void __init fpga_irq_init(void __iomem *base, const char *name, int irq_start,
+			  int parent_irq, u32 valid, struct device_node *node)
+{
+	struct fpga_irq_data *f;
+
+	if (fpga_irq_id >= ARRAY_SIZE(fpga_irq_devices)) {
+		printk(KERN_ERR "%s: too few FPGA IRQ controllers, increase CONFIG_PLAT_VERSATILE_FPGA_IRQ_NR\n", __func__);
+		return;
+	}
+
+	f = &fpga_irq_devices[fpga_irq_id];
+	f->base = base;
+	f->irq_start = irq_start;
+	f->chip.name = name;
 	f->chip.irq_ack = fpga_irq_mask;
 	f->chip.irq_mask = fpga_irq_mask;
 	f->chip.irq_unmask = fpga_irq_unmask;
+	f->valid = valid;
 
 	if (parent_irq != -1) {
 		irq_set_handler_data(parent_irq, f);
 		irq_set_chained_handler(parent_irq, fpga_irq_handle);
 	}
 
-	for (i = 0; i < 32; i++) {
-		if (valid & (1 << i)) {
-			unsigned int irq = f->irq_start + i;
+	f->domain = irq_domain_add_legacy(node, fls(valid), f->irq_start, 0,
+					  &fpga_irqdomain_ops, f);
+	pr_info("FPGA IRQ chip %d \"%s\" @ %p, %u irqs\n",
+		fpga_irq_id, name, base, f->used_irqs);
 
-			irq_set_chip_data(irq, f);
-			irq_set_chip_and_handler(irq, &f->chip,
-						 handle_level_irq);
-			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-		}
-	}
+	fpga_irq_id++;
 }
diff --git a/arch/arm/plat-versatile/include/plat/fpga-irq.h b/arch/arm/plat-versatile/include/plat/fpga-irq.h
index 627fafd1e595..91bcfb67551d 100644
--- a/arch/arm/plat-versatile/include/plat/fpga-irq.h
+++ b/arch/arm/plat-versatile/include/plat/fpga-irq.h
@@ -1,12 +1,11 @@
 #ifndef PLAT_FPGA_IRQ_H
 #define PLAT_FPGA_IRQ_H
 
-struct fpga_irq_data {
-	void __iomem *base;
-	unsigned int irq_start;
-	struct irq_chip chip;
-};
+struct device_node;
+struct pt_regs;
 
-void fpga_irq_init(int, u32, struct fpga_irq_data *);
+void fpga_handle_irq(struct pt_regs *regs);
+void fpga_irq_init(void __iomem *, const char *, int, int, u32,
+		struct device_node *node);
 
 #endif
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index f9c9f33f8cbe..2997e56ce0dd 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -16,7 +16,7 @@
 # are merged into mainline or have been edited in the machine database
 # within the last 12 months.  References to machine_is_NAME() do not count!
 #
-# Last update: Tue Dec 6 11:07:38 2011
+# Last update: Thu Apr 26 08:44:23 2012
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -205,6 +205,7 @@ omap_fsample		MACH_OMAP_FSAMPLE	OMAP_FSAMPLE		970
 snapper_cl15		MACH_SNAPPER_CL15	SNAPPER_CL15		986
 omap_palmz71		MACH_OMAP_PALMZ71	OMAP_PALMZ71		993
 smdk2412		MACH_SMDK2412		SMDK2412		1009
+bkde303			MACH_BKDE303		BKDE303			1021
 smdk2413		MACH_SMDK2413		SMDK2413		1022
 aml_m5900		MACH_AML_M5900		AML_M5900		1024
 balloon3		MACH_BALLOON3		BALLOON3		1029
@@ -381,8 +382,6 @@ davinci_da850_evm	MACH_DAVINCI_DA850_EVM	DAVINCI_DA850_EVM	2157
 at91sam9g10ek		MACH_AT91SAM9G10EK	AT91SAM9G10EK		2159
 omap_4430sdp		MACH_OMAP_4430SDP	OMAP_4430SDP		2160
 magx_zn5		MACH_MAGX_ZN5		MAGX_ZN5		2162
-btmavb101		MACH_BTMAVB101		BTMAVB101		2172
-btmawb101		MACH_BTMAWB101		BTMAWB101		2173
 tx25			MACH_TX25		TX25			2177
 omap3_torpedo		MACH_OMAP3_TORPEDO	OMAP3_TORPEDO		2178
 anw6410			MACH_ANW6410		ANW6410			2183
@@ -397,7 +396,6 @@ net2big_v2		MACH_NET2BIG_V2		NET2BIG_V2		2204
 net5big_v2		MACH_NET5BIG_V2		NET5BIG_V2		2206
 inetspace_v2		MACH_INETSPACE_V2	INETSPACE_V2		2208
 at91sam9g45ekes		MACH_AT91SAM9G45EKES	AT91SAM9G45EKES		2212
-pc7302			MACH_PC7302		PC7302			2220
 spear600		MACH_SPEAR600		SPEAR600		2236
 spear300		MACH_SPEAR300		SPEAR300		2237
 lilly1131		MACH_LILLY1131		LILLY1131		2239
@@ -407,7 +405,6 @@ d2net			MACH_D2NET		D2NET			2282
 bigdisk			MACH_BIGDISK		BIGDISK			2283
 at91sam9g20ek_2mmc	MACH_AT91SAM9G20EK_2MMC	AT91SAM9G20EK_2MMC	2288
 bcmring			MACH_BCMRING		BCMRING			2289
-dp6xx			MACH_DP6XX		DP6XX			2302
 mahimahi		MACH_MAHIMAHI		MAHIMAHI		2304
 smdk6442		MACH_SMDK6442		SMDK6442		2324
 openrd_base		MACH_OPENRD_BASE	OPENRD_BASE		2325
@@ -444,8 +441,6 @@ mx28evk			MACH_MX28EVK		MX28EVK			2531
 smartq5			MACH_SMARTQ5		SMARTQ5			2534
 davinci_dm6467tevm	MACH_DAVINCI_DM6467TEVM	DAVINCI_DM6467TEVM	2548
 mxt_td60		MACH_MXT_TD60		MXT_TD60		2550
-riot_bei2		MACH_RIOT_BEI2		RIOT_BEI2		2576
-riot_x37		MACH_RIOT_X37		RIOT_X37		2578
 pca101			MACH_PCA101		PCA101			2595
 capc7117		MACH_CAPC7117		CAPC7117		2612
 icontrol		MACH_ICONTROL		ICONTROL		2624
@@ -460,7 +455,6 @@ spear320		MACH_SPEAR320		SPEAR320		2661
 aquila			MACH_AQUILA		AQUILA			2676
 esata_sheevaplug	MACH_ESATA_SHEEVAPLUG	ESATA_SHEEVAPLUG	2678
 msm7x30_surf		MACH_MSM7X30_SURF	MSM7X30_SURF		2679
-ea2478devkit		MACH_EA2478DEVKIT	EA2478DEVKIT		2683
 terastation_wxl		MACH_TERASTATION_WXL	TERASTATION_WXL		2697
 msm7x25_surf		MACH_MSM7X25_SURF	MSM7X25_SURF		2703
 msm7x25_ffa		MACH_MSM7X25_FFA	MSM7X25_FFA		2704
@@ -479,8 +473,6 @@ wbd222			MACH_WBD222		WBD222			2753
 msm8x60_surf		MACH_MSM8X60_SURF	MSM8X60_SURF		2755
 msm8x60_sim		MACH_MSM8X60_SIM	MSM8X60_SIM		2756
 tcc8000_sdk		MACH_TCC8000_SDK	TCC8000_SDK		2758
-nanos			MACH_NANOS		NANOS			2759
-stamp9g45		MACH_STAMP9G45		STAMP9G45		2761
 cns3420vb		MACH_CNS3420VB		CNS3420VB		2776
 omap4_panda		MACH_OMAP4_PANDA	OMAP4_PANDA		2791
 ti8168evm		MACH_TI8168EVM		TI8168EVM		2800
@@ -490,12 +482,9 @@ eukrea_cpuimx35sd	MACH_EUKREA_CPUIMX35SD	EUKREA_CPUIMX35SD	2821
 eukrea_cpuimx51sd	MACH_EUKREA_CPUIMX51SD	EUKREA_CPUIMX51SD	2822
 eukrea_cpuimx51		MACH_EUKREA_CPUIMX51	EUKREA_CPUIMX51		2823
 smdkc210		MACH_SMDKC210		SMDKC210		2838
-pca102			MACH_PCA102		PCA102			2843
+pcaal1			MACH_PCAAL1		PCAAL1			2843
 t5325			MACH_T5325		T5325			2846
 income			MACH_INCOME		INCOME			2849
-vvbox_sdorig2		MACH_VVBOX_SDORIG2	VVBOX_SDORIG2		2857
-vvbox_sdlite2		MACH_VVBOX_SDLITE2	VVBOX_SDLITE2		2858
-vvbox_sdpro4		MACH_VVBOX_SDPRO4	VVBOX_SDPRO4		2859
 mx257sx			MACH_MX257SX		MX257SX			2861
 goni			MACH_GONI		GONI			2862
 bv07			MACH_BV07		BV07			2882
@@ -504,6 +493,7 @@ devixp			MACH_DEVIXP		DEVIXP			2885
 miccpt			MACH_MICCPT		MICCPT			2886
 mic256			MACH_MIC256		MIC256			2887
 u5500			MACH_U5500		U5500			2890
+pov15hd			MACH_POV15HD		POV15HD			2910
 linkstation_lschl	MACH_LINKSTATION_LSCHL	LINKSTATION_LSCHL	2913
 smdkv310		MACH_SMDKV310		SMDKV310		2925
 wm8505_7in_netbook	MACH_WM8505_7IN_NETBOOK	WM8505_7IN_NETBOOK	2928
@@ -537,243 +527,24 @@ trimslice		MACH_TRIMSLICE		TRIMSLICE		3209
 mackerel		MACH_MACKEREL		MACKEREL		3211
 kaen			MACH_KAEN		KAEN			3217
 nokia_rm680		MACH_NOKIA_RM680	NOKIA_RM680		3220
-dm6446_adbox		MACH_DM6446_ADBOX	DM6446_ADBOX		3226
-quad_salsa		MACH_QUAD_SALSA		QUAD_SALSA		3227
-abb_gma_1_1		MACH_ABB_GMA_1_1	ABB_GMA_1_1		3228
-svcid			MACH_SVCID		SVCID			3229
 msm8960_sim		MACH_MSM8960_SIM	MSM8960_SIM		3230
 msm8960_rumi3		MACH_MSM8960_RUMI3	MSM8960_RUMI3		3231
-icon_g			MACH_ICON_G		ICON_G			3232
-mb3			MACH_MB3		MB3			3233
 gsia18s			MACH_GSIA18S		GSIA18S			3234
-pivicc			MACH_PIVICC		PIVICC			3235
-pcm048			MACH_PCM048		PCM048			3236
-dds			MACH_DDS		DDS			3237
-chalten_xa1		MACH_CHALTEN_XA1	CHALTEN_XA1		3238
-ts48xx			MACH_TS48XX		TS48XX			3239
-tonga2_tfttimer		MACH_TONGA2_TFTTIMER	TONGA2_TFTTIMER		3240
-whistler		MACH_WHISTLER		WHISTLER		3241
-asl_phoenix		MACH_ASL_PHOENIX	ASL_PHOENIX		3242
-at91sam9263otlite	MACH_AT91SAM9263OTLITE	AT91SAM9263OTLITE	3243
-ddplug			MACH_DDPLUG		DDPLUG			3244
-d2plug			MACH_D2PLUG		D2PLUG			3245
-kzm9d			MACH_KZM9D		KZM9D			3246
-verdi_lte		MACH_VERDI_LTE		VERDI_LTE		3247
-nanozoom		MACH_NANOZOOM		NANOZOOM		3248
-dm3730_som_lv		MACH_DM3730_SOM_LV	DM3730_SOM_LV		3249
-dm3730_torpedo		MACH_DM3730_TORPEDO	DM3730_TORPEDO		3250
-anchovy			MACH_ANCHOVY		ANCHOVY			3251
-re2rev20		MACH_RE2REV20		RE2REV20		3253
-re2rev21		MACH_RE2REV21		RE2REV21		3254
-cns21xx			MACH_CNS21XX		CNS21XX			3255
-rider			MACH_RIDER		RIDER			3257
-nsk330			MACH_NSK330		NSK330			3258
-cns2133evb		MACH_CNS2133EVB		CNS2133EVB		3259
-z3_816x_mod		MACH_Z3_816X_MOD	Z3_816X_MOD		3260
-z3_814x_mod		MACH_Z3_814X_MOD	Z3_814X_MOD		3261
-beect			MACH_BEECT		BEECT			3262
-dma_thunderbug		MACH_DMA_THUNDERBUG	DMA_THUNDERBUG		3263
-omn_at91sam9g20		MACH_OMN_AT91SAM9G20	OMN_AT91SAM9G20		3264
-mx25_e2s_uc		MACH_MX25_E2S_UC	MX25_E2S_UC		3265
-mione			MACH_MIONE		MIONE			3266
-top9000_tcu		MACH_TOP9000_TCU	TOP9000_TCU		3267
-top9000_bsl		MACH_TOP9000_BSL	TOP9000_BSL		3268
-kingdom			MACH_KINGDOM		KINGDOM			3269
-armadillo460		MACH_ARMADILLO460	ARMADILLO460		3270
-lq2			MACH_LQ2		LQ2			3271
-sweda_tms2		MACH_SWEDA_TMS2		SWEDA_TMS2		3272
 mx53_loco		MACH_MX53_LOCO		MX53_LOCO		3273
-acer_a8			MACH_ACER_A8		ACER_A8			3275
-acer_gauguin		MACH_ACER_GAUGUIN	ACER_GAUGUIN		3276
-guppy			MACH_GUPPY		GUPPY			3277
-mx61_ard		MACH_MX61_ARD		MX61_ARD		3278
 tx53			MACH_TX53		TX53			3279
-omapl138_case_a3	MACH_OMAPL138_CASE_A3	OMAPL138_CASE_A3	3280
-uemd			MACH_UEMD		UEMD			3281
-ccwmx51mut		MACH_CCWMX51MUT		CCWMX51MUT		3282
-rockhopper		MACH_ROCKHOPPER		ROCKHOPPER		3283
 encore			MACH_ENCORE		ENCORE			3284
-hkdkc100		MACH_HKDKC100		HKDKC100		3285
-ts42xx			MACH_TS42XX		TS42XX			3286
-aebl			MACH_AEBL		AEBL			3287
 wario			MACH_WARIO		WARIO			3288
-gfs_spm			MACH_GFS_SPM		GFS_SPM			3289
 cm_t3730		MACH_CM_T3730		CM_T3730		3290
-isc3			MACH_ISC3		ISC3			3291
-rascal			MACH_RASCAL		RASCAL			3292
 hrefv60			MACH_HREFV60		HREFV60			3293
-tpt_2_0			MACH_TPT_2_0		TPT_2_0			3294
-splendor		MACH_SPLENDOR		SPLENDOR		3296
-msm8x60_qt		MACH_MSM8X60_QT		MSM8X60_QT		3298
-htc_hd_mini		MACH_HTC_HD_MINI	HTC_HD_MINI		3299
-athene			MACH_ATHENE		ATHENE			3300
-deep_r_ek_1		MACH_DEEP_R_EK_1	DEEP_R_EK_1		3301
-vivow_ct		MACH_VIVOW_CT		VIVOW_CT		3302
-nery_1000		MACH_NERY_1000		NERY_1000		3303
-rfl109145_ssrv		MACH_RFL109145_SSRV	RFL109145_SSRV		3304
-nmh			MACH_NMH		NMH			3305
-wn802t			MACH_WN802T		WN802T			3306
-dragonet		MACH_DRAGONET		DRAGONET		3307
-at91sam9263desk16l	MACH_AT91SAM9263DESK16L	AT91SAM9263DESK16L	3309
-bcmhana_sv		MACH_BCMHANA_SV		BCMHANA_SV		3310
-bcmhana_tablet		MACH_BCMHANA_TABLET	BCMHANA_TABLET		3311
-koi			MACH_KOI		KOI			3312
-ts4800			MACH_TS4800		TS4800			3313
-tqma9263		MACH_TQMA9263		TQMA9263		3314
-holiday			MACH_HOLIDAY		HOLIDAY			3315
-pcats_overlay		MACH_PCATS_OVERLAY	PCATS_OVERLAY		3317
-hwgw6410		MACH_HWGW6410		HWGW6410		3318
-shenzhou		MACH_SHENZHOU		SHENZHOU		3319
-cwme9210		MACH_CWME9210		CWME9210		3320
-cwme9210js		MACH_CWME9210JS		CWME9210JS		3321
-colibri_tegra2		MACH_COLIBRI_TEGRA2	COLIBRI_TEGRA2		3323
-w21			MACH_W21		W21			3324
-polysat1		MACH_POLYSAT1		POLYSAT1		3325
-dataway			MACH_DATAWAY		DATAWAY			3326
-cobral138		MACH_COBRAL138		COBRAL138		3327
-roverpcs8		MACH_ROVERPCS8		ROVERPCS8		3328
-marvelc			MACH_MARVELC		MARVELC			3329
-navefihid		MACH_NAVEFIHID		NAVEFIHID		3330
-dm365_cv100		MACH_DM365_CV100	DM365_CV100		3331
-able			MACH_ABLE		ABLE			3332
-legacy			MACH_LEGACY		LEGACY			3333
-icong			MACH_ICONG		ICONG			3334
-rover_g8		MACH_ROVER_G8		ROVER_G8		3335
-t5388p			MACH_T5388P		T5388P			3336
-dingo			MACH_DINGO		DINGO			3337
-goflexhome		MACH_GOFLEXHOME		GOFLEXHOME		3338
-lanreadyfn511		MACH_LANREADYFN511	LANREADYFN511		3340
-omap3_baia		MACH_OMAP3_BAIA		OMAP3_BAIA		3341
-omap3smartdisplay	MACH_OMAP3SMARTDISPLAY	OMAP3SMARTDISPLAY	3342
-xilinx			MACH_XILINX		XILINX			3343
-a2f			MACH_A2F		A2F			3344
-sky25			MACH_SKY25		SKY25			3345
-ccmx53			MACH_CCMX53		CCMX53			3346
-ccmx53js		MACH_CCMX53JS		CCMX53JS		3347
-ccwmx53			MACH_CCWMX53		CCWMX53			3348
-ccwmx53js		MACH_CCWMX53JS		CCWMX53JS		3349
-frisms			MACH_FRISMS		FRISMS			3350
-msm7x27a_ffa		MACH_MSM7X27A_FFA	MSM7X27A_FFA		3351
-msm7x27a_surf		MACH_MSM7X27A_SURF	MSM7X27A_SURF		3352
-msm7x27a_rumi3		MACH_MSM7X27A_RUMI3	MSM7X27A_RUMI3		3353
-dimmsam9g20		MACH_DIMMSAM9G20	DIMMSAM9G20		3354
-dimm_imx28		MACH_DIMM_IMX28		DIMM_IMX28		3355
-amk_a4			MACH_AMK_A4		AMK_A4			3356
-gnet_sgme		MACH_GNET_SGME		GNET_SGME		3357
-shooter_u		MACH_SHOOTER_U		SHOOTER_U		3358
-vmx53			MACH_VMX53		VMX53			3359
-rhino			MACH_RHINO		RHINO			3360
 armlex4210		MACH_ARMLEX4210		ARMLEX4210		3361
-swarcoextmodem		MACH_SWARCOEXTMODEM	SWARCOEXTMODEM		3362
 snowball		MACH_SNOWBALL		SNOWBALL		3363
-pcm049			MACH_PCM049		PCM049			3364
-vigor			MACH_VIGOR		VIGOR			3365
-oslo_amundsen		MACH_OSLO_AMUNDSEN	OSLO_AMUNDSEN		3366
-gsl_diamond		MACH_GSL_DIAMOND	GSL_DIAMOND		3367
-cv2201			MACH_CV2201		CV2201			3368
-cv2202			MACH_CV2202		CV2202			3369
-cv2203			MACH_CV2203		CV2203			3370
-vit_ibox		MACH_VIT_IBOX		VIT_IBOX		3371
-dm6441_esp		MACH_DM6441_ESP		DM6441_ESP		3372
-at91sam9x5ek		MACH_AT91SAM9X5EK	AT91SAM9X5EK		3373
-libra			MACH_LIBRA		LIBRA			3374
-easycrrh		MACH_EASYCRRH		EASYCRRH		3375
-tripel			MACH_TRIPEL		TRIPEL			3376
-endian_mini		MACH_ENDIAN_MINI	ENDIAN_MINI		3377
 xilinx_ep107		MACH_XILINX_EP107	XILINX_EP107		3378
 nuri			MACH_NURI		NURI			3379
-janus			MACH_JANUS		JANUS			3380
-ddnas			MACH_DDNAS		DDNAS			3381
-tag			MACH_TAG		TAG			3382
-tagw			MACH_TAGW		TAGW			3383
-nitrogen_vm_imx51	MACH_NITROGEN_VM_IMX51	NITROGEN_VM_IMX51	3384
-viprinet		MACH_VIPRINET		VIPRINET		3385
-bockw			MACH_BOCKW		BOCKW			3386
-eva2000			MACH_EVA2000		EVA2000			3387
-steelyard		MACH_STEELYARD		STEELYARD		3388
-nsslsboard		MACH_NSSLSBOARD		NSSLSBOARD		3392
-geneva_b5		MACH_GENEVA_B5		GENEVA_B5		3393
-spear1340		MACH_SPEAR1340		SPEAR1340		3394
-rexmas			MACH_REXMAS		REXMAS			3395
-msm8960_cdp		MACH_MSM8960_CDP	MSM8960_CDP		3396
-msm8960_fluid		MACH_MSM8960_FLUID	MSM8960_FLUID		3398
-msm8960_apq		MACH_MSM8960_APQ	MSM8960_APQ		3399
-helios_v2		MACH_HELIOS_V2		HELIOS_V2		3400
-mif10p			MACH_MIF10P		MIF10P			3401
-iam28			MACH_IAM28		IAM28			3402
-picasso			MACH_PICASSO		PICASSO			3403
-mr301a			MACH_MR301A		MR301A			3404
-notle			MACH_NOTLE		NOTLE			3405
-eelx2			MACH_EELX2		EELX2			3406
-moon			MACH_MOON		MOON			3407
-ruby			MACH_RUBY		RUBY			3408
-goldengate		MACH_GOLDENGATE		GOLDENGATE		3409
-ctbu_gen2		MACH_CTBU_GEN2		CTBU_GEN2		3410
-kmp_am17_01		MACH_KMP_AM17_01	KMP_AM17_01		3411
 wtplug			MACH_WTPLUG		WTPLUG			3412
-mx27su2			MACH_MX27SU2		MX27SU2			3413
-nb31			MACH_NB31		NB31			3414
-hjsdu			MACH_HJSDU		HJSDU			3415
-td3_rev1		MACH_TD3_REV1		TD3_REV1		3416
-eag_ci4000		MACH_EAG_CI4000		EAG_CI4000		3417
-net5big_nand_v2		MACH_NET5BIG_NAND_V2	NET5BIG_NAND_V2		3418
-cpx2			MACH_CPX2		CPX2			3419
-net2big_nand_v2		MACH_NET2BIG_NAND_V2	NET2BIG_NAND_V2		3420
-ecuv5			MACH_ECUV5		ECUV5			3421
-hsgx6d			MACH_HSGX6D		HSGX6D			3422
-dawad7			MACH_DAWAD7		DAWAD7			3423
-sam9repeater		MACH_SAM9REPEATER	SAM9REPEATER		3424
-gt_i5700		MACH_GT_I5700		GT_I5700		3425
-ctera_plug_c2		MACH_CTERA_PLUG_C2	CTERA_PLUG_C2		3426
-marvelct		MACH_MARVELCT		MARVELCT		3427
-ag11005			MACH_AG11005		AG11005			3428
-vangogh			MACH_VANGOGH		VANGOGH			3430
-matrix505		MACH_MATRIX505		MATRIX505		3431
-oce_nigma		MACH_OCE_NIGMA		OCE_NIGMA		3432
-t55			MACH_T55		T55			3433
-bio3k			MACH_BIO3K		BIO3K			3434
-expressct		MACH_EXPRESSCT		EXPRESSCT		3435
-cardhu			MACH_CARDHU		CARDHU			3436
-aruba			MACH_ARUBA		ARUBA			3437
-bonaire			MACH_BONAIRE		BONAIRE			3438
-nuc700evb		MACH_NUC700EVB		NUC700EVB		3439
-nuc710evb		MACH_NUC710EVB		NUC710EVB		3440
-nuc740evb		MACH_NUC740EVB		NUC740EVB		3441
-nuc745evb		MACH_NUC745EVB		NUC745EVB		3442
-transcede		MACH_TRANSCEDE		TRANSCEDE		3443
-mora			MACH_MORA		MORA			3444
-nda_evm			MACH_NDA_EVM		NDA_EVM			3445
-timu			MACH_TIMU		TIMU			3446
-expressh		MACH_EXPRESSH		EXPRESSH		3447
 veridis_a300		MACH_VERIDIS_A300	VERIDIS_A300		3448
-dm368_leopard		MACH_DM368_LEOPARD	DM368_LEOPARD		3449
-omap_mcop		MACH_OMAP_MCOP		OMAP_MCOP		3450
-tritip			MACH_TRITIP		TRITIP			3451
-sm1k			MACH_SM1K		SM1K			3452
-monch			MACH_MONCH		MONCH			3453
-curacao			MACH_CURACAO		CURACAO			3454
 origen			MACH_ORIGEN		ORIGEN			3455
-epc10			MACH_EPC10		EPC10			3456
-sgh_i740		MACH_SGH_I740		SGH_I740		3457
-tuna			MACH_TUNA		TUNA			3458
-mx51_tulip		MACH_MX51_TULIP		MX51_TULIP		3459
-mx51_aster7		MACH_MX51_ASTER7	MX51_ASTER7		3460
-acro37xbrd		MACH_ACRO37XBRD		ACRO37XBRD		3461
-elke			MACH_ELKE		ELKE			3462
-sbc6000x		MACH_SBC6000X		SBC6000X		3463
-r1801e			MACH_R1801E		R1801E			3464
-h1600			MACH_H1600		H1600			3465
-mini210			MACH_MINI210		MINI210			3466
-mini8168		MACH_MINI8168		MINI8168		3467
-pc7308			MACH_PC7308		PC7308			3468
-kmm2m01			MACH_KMM2M01		KMM2M01			3470
-mx51erebus		MACH_MX51EREBUS		MX51EREBUS		3471
 wm8650refboard		MACH_WM8650REFBOARD	WM8650REFBOARD		3472
-tuxrail			MACH_TUXRAIL		TUXRAIL			3473
-arthur			MACH_ARTHUR		ARTHUR			3474
-doorboy			MACH_DOORBOY		DOORBOY			3475
 xarina			MACH_XARINA		XARINA			3476
-roverx7			MACH_ROVERX7		ROVERX7			3477
 sdvr			MACH_SDVR		SDVR			3478
 acer_maya		MACH_ACER_MAYA		ACER_MAYA		3479
 pico			MACH_PICO		PICO			3480
@@ -999,6 +770,7 @@ promwad_jade		MACH_PROMWAD_JADE	PROMWAD_JADE		3708
 amp			MACH_AMP		AMP			3709
 gnet_amp		MACH_GNET_AMP		GNET_AMP		3710
 toques			MACH_TOQUES		TOQUES			3711
+apx4devkit		MACH_APX4DEVKIT		APX4DEVKIT		3712
 dct_storm		MACH_DCT_STORM		DCT_STORM		3713
 owl			MACH_OWL		OWL			3715
 cogent_csb1741		MACH_COGENT_CSB1741	COGENT_CSB1741		3716
@@ -1063,7 +835,6 @@ shelter			MACH_SHELTER		SHELTER			3778
 omap3_devkit8500	MACH_OMAP3_DEVKIT8500	OMAP3_DEVKIT8500	3779
 edgetd			MACH_EDGETD		EDGETD			3780
 copperyard		MACH_COPPERYARD		COPPERYARD		3781
-edge			MACH_EDGE		EDGE			3782
 edge_u			MACH_EDGE_U		EDGE_U			3783
 edge_td			MACH_EDGE_TD		EDGE_TD			3784
 wdss			MACH_WDSS		WDSS			3785
@@ -1169,3 +940,269 @@ elite_ulk		MACH_ELITE_ULK		ELITE_ULK		3888
 pov2			MACH_POV2		POV2			3889
 ipod_touch_2g		MACH_IPOD_TOUCH_2G	IPOD_TOUCH_2G		3890
 da850_pqab		MACH_DA850_PQAB		DA850_PQAB		3891
+fermi			MACH_FERMI		FERMI			3892
+ccardwmx28		MACH_CCARDWMX28		CCARDWMX28		3893
+ccardmx28		MACH_CCARDMX28		CCARDMX28		3894
+fs20_fcm2050		MACH_FS20_FCM2050	FS20_FCM2050		3895
+kinetis			MACH_KINETIS		KINETIS			3896
+kai			MACH_KAI		KAI			3897
+bcthb2			MACH_BCTHB2		BCTHB2			3898
+inels3_cu		MACH_INELS3_CU		INELS3_CU		3899
+da850_apollo		MACH_DA850_APOLLO	DA850_APOLLO		3901
+tracnas			MACH_TRACNAS		TRACNAS			3902
+mityarm335x		MACH_MITYARM335X	MITYARM335X		3903
+xcgz7x			MACH_XCGZ7X		XCGZ7X			3904
+cubox			MACH_CUBOX		CUBOX			3905
+terminator		MACH_TERMINATOR		TERMINATOR		3906
+eye03			MACH_EYE03		EYE03			3907
+kota3			MACH_KOTA3		KOTA3			3908
+pscpe			MACH_PSCPE		PSCPE			3910
+akt1100			MACH_AKT1100		AKT1100			3911
+pcaaxl2			MACH_PCAAXL2		PCAAXL2			3912
+primodd_ct		MACH_PRIMODD_CT		PRIMODD_CT		3913
+nsbc			MACH_NSBC		NSBC			3914
+meson2_skt		MACH_MESON2_SKT		MESON2_SKT		3915
+meson2_ref		MACH_MESON2_REF		MESON2_REF		3916
+ccardwmx28js		MACH_CCARDWMX28JS	CCARDWMX28JS		3917
+ccardmx28js		MACH_CCARDMX28JS	CCARDMX28JS		3918
+indico			MACH_INDICO		INDICO			3919
+msm8960dt		MACH_MSM8960DT		MSM8960DT		3920
+primods			MACH_PRIMODS		PRIMODS			3921
+beluga_m1388		MACH_BELUGA_M1388	BELUGA_M1388		3922
+primotd			MACH_PRIMOTD		PRIMOTD			3923
+varan_master		MACH_VARAN_MASTER	VARAN_MASTER		3924
+primodd			MACH_PRIMODD		PRIMODD			3925
+jetduo			MACH_JETDUO		JETDUO			3926
+mx53_umobo		MACH_MX53_UMOBO		MX53_UMOBO		3927
+trats			MACH_TRATS		TRATS			3928
+starcraft		MACH_STARCRAFT		STARCRAFT		3929
+qseven_tegra2		MACH_QSEVEN_TEGRA2	QSEVEN_TEGRA2		3930
+lichee_sun4i_devbd	MACH_LICHEE_SUN4I_DEVBD	LICHEE_SUN4I_DEVBD	3931
+movenow			MACH_MOVENOW		MOVENOW			3932
+golf_u			MACH_GOLF_U		GOLF_U			3933
+msm7627a_evb		MACH_MSM7627A_EVB	MSM7627A_EVB		3934
+rambo			MACH_RAMBO		RAMBO			3935
+golfu			MACH_GOLFU		GOLFU			3936
+mango310		MACH_MANGO310		MANGO310		3937
+dns343			MACH_DNS343		DNS343			3938
+var_som_om44		MACH_VAR_SOM_OM44	VAR_SOM_OM44		3939
+naon			MACH_NAON		NAON			3940
+vp4000			MACH_VP4000		VP4000			3941
+impcard			MACH_IMPCARD		IMPCARD			3942
+smoovcam		MACH_SMOOVCAM		SMOOVCAM		3943
+cobham3725		MACH_COBHAM3725		COBHAM3725		3944
+cobham3730		MACH_COBHAM3730		COBHAM3730		3945
+cobham3703		MACH_COBHAM3703		COBHAM3703		3946
+quetzal			MACH_QUETZAL		QUETZAL			3947
+apq8064_cdp		MACH_APQ8064_CDP	APQ8064_CDP		3948
+apq8064_mtp		MACH_APQ8064_MTP	APQ8064_MTP		3949
+apq8064_fluid		MACH_APQ8064_FLUID	APQ8064_FLUID		3950
+apq8064_liquid		MACH_APQ8064_LIQUID	APQ8064_LIQUID		3951
+mango210		MACH_MANGO210		MANGO210		3952
+mango100		MACH_MANGO100		MANGO100		3953
+mango24			MACH_MANGO24		MANGO24			3954
+mango64			MACH_MANGO64		MANGO64			3955
+nsa320			MACH_NSA320		NSA320			3956
+elv_ccu2		MACH_ELV_CCU2		ELV_CCU2		3957
+triton_x00		MACH_TRITON_X00		TRITON_X00		3958
+triton_1500_2000	MACH_TRITON_1500_2000	TRITON_1500_2000	3959
+pogoplugv4		MACH_POGOPLUGV4		POGOPLUGV4		3960
+venus_cl		MACH_VENUS_CL		VENUS_CL		3961
+vulcano_g20		MACH_VULCANO_G20	VULCANO_G20		3962
+sgs_i9100		MACH_SGS_I9100		SGS_I9100		3963
+stsv2			MACH_STSV2		STSV2			3964
+csb1724			MACH_CSB1724		CSB1724			3965
+omapl138_lcdk		MACH_OMAPL138_LCDK	OMAPL138_LCDK		3966
+pvd_mx25		MACH_PVD_MX25		PVD_MX25		3968
+meson6_skt		MACH_MESON6_SKT		MESON6_SKT		3969
+meson6_ref		MACH_MESON6_REF		MESON6_REF		3970
+pxm			MACH_PXM		PXM			3971
+pogoplugv3		MACH_POGOPLUGV3		POGOPLUGV3		3973
+mlp89626		MACH_MLP89626		MLP89626		3974
+iomegahmndce		MACH_IOMEGAHMNDCE	IOMEGAHMNDCE		3975
+pogoplugv3pci		MACH_POGOPLUGV3PCI	POGOPLUGV3PCI		3976
+bntv250			MACH_BNTV250		BNTV250			3977
+mx53_qseven		MACH_MX53_QSEVEN	MX53_QSEVEN		3978
+gtl_it1100		MACH_GTL_IT1100		GTL_IT1100		3979
+mx6q_sabresd		MACH_MX6Q_SABRESD	MX6Q_SABRESD		3980
+mt4			MACH_MT4		MT4			3981
+jumbo_d			MACH_JUMBO_D		JUMBO_D			3982
+jumbo_i			MACH_JUMBO_I		JUMBO_I			3983
+fs20_dmp		MACH_FS20_DMP		FS20_DMP		3984
+dns320			MACH_DNS320		DNS320			3985
+mx28bacos		MACH_MX28BACOS		MX28BACOS		3986
+tl80			MACH_TL80		TL80			3987
+polatis_nic_1001	MACH_POLATIS_NIC_1001	POLATIS_NIC_1001	3988
+tely			MACH_TELY		TELY			3989
+u8520			MACH_U8520		U8520			3990
+manta			MACH_MANTA		MANTA			3991
+mpq8064_cdp		MACH_MPQ8064_CDP	MPQ8064_CDP		3993
+mpq8064_dtv		MACH_MPQ8064_DTV	MPQ8064_DTV		3995
+dm368som		MACH_DM368SOM		DM368SOM		3996
+gprisb2			MACH_GPRISB2		GPRISB2			3997
+chammid			MACH_CHAMMID		CHAMMID			3998
+seoul2			MACH_SEOUL2		SEOUL2			3999
+omap4_nooktablet	MACH_OMAP4_NOOKTABLET	OMAP4_NOOKTABLET	4000
+aalto			MACH_AALTO		AALTO			4001
+metro			MACH_METRO		METRO			4002
+cydm3730		MACH_CYDM3730		CYDM3730		4003
+tqma53			MACH_TQMA53		TQMA53			4004
+msm7627a_qrd3		MACH_MSM7627A_QRD3	MSM7627A_QRD3		4005
+mx28_canby		MACH_MX28_CANBY		MX28_CANBY		4006
+tiger			MACH_TIGER		TIGER			4007
+pcats_9307_type_a	MACH_PCATS_9307_TYPE_A	PCATS_9307_TYPE_A	4008
+pcats_9307_type_o	MACH_PCATS_9307_TYPE_O	PCATS_9307_TYPE_O	4009
+pcats_9307_type_r	MACH_PCATS_9307_TYPE_R	PCATS_9307_TYPE_R	4010
+streamplug		MACH_STREAMPLUG		STREAMPLUG		4011
+icechicken_dev		MACH_ICECHICKEN_DEV	ICECHICKEN_DEV		4012
+hedgehog		MACH_HEDGEHOG		HEDGEHOG		4013
+yusend_obc		MACH_YUSEND_OBC		YUSEND_OBC		4014
+imxninja		MACH_IMXNINJA		IMXNINJA		4015
+omap4_jarod		MACH_OMAP4_JAROD	OMAP4_JAROD		4016
+eco5_pk			MACH_ECO5_PK		ECO5_PK			4017
+qj2440			MACH_QJ2440		QJ2440			4018
+mx6q_mercury		MACH_MX6Q_MERCURY	MX6Q_MERCURY		4019
+cm6810			MACH_CM6810		CM6810			4020
+omap4_torpedo		MACH_OMAP4_TORPEDO	OMAP4_TORPEDO		4021
+nsa310			MACH_NSA310		NSA310			4022
+tmx536			MACH_TMX536		TMX536			4023
+ktt20			MACH_KTT20		KTT20			4024
+dragonix		MACH_DRAGONIX		DRAGONIX		4025
+lungching		MACH_LUNGCHING		LUNGCHING		4026
+bulogics		MACH_BULOGICS		BULOGICS		4027
+mx535_sx		MACH_MX535_SX		MX535_SX		4028
+ngui3250		MACH_NGUI3250		NGUI3250		4029
+salutec_dac		MACH_SALUTEC_DAC	SALUTEC_DAC		4030
+loco			MACH_LOCO		LOCO			4031
+ctera_plug_usi		MACH_CTERA_PLUG_USI	CTERA_PLUG_USI		4032
+scepter			MACH_SCEPTER		SCEPTER			4033
+sga			MACH_SGA		SGA			4034
+p_81_j5			MACH_P_81_J5		P_81_J5			4035
+p_81_o4			MACH_P_81_O4		P_81_O4			4036
+msm8625_surf		MACH_MSM8625_SURF	MSM8625_SURF		4037
+carallon_shark		MACH_CARALLON_SHARK	CARALLON_SHARK		4038
+ordog			MACH_ORDOG		ORDOG			4040
+puente_io		MACH_PUENTE_IO		PUENTE_IO		4041
+msm8625_evb		MACH_MSM8625_EVB	MSM8625_EVB		4042
+ev_am1707		MACH_EV_AM1707		EV_AM1707		4043
+ev_am1707e2		MACH_EV_AM1707E2	EV_AM1707E2		4044
+ev_am3517e2		MACH_EV_AM3517E2	EV_AM3517E2		4045
+calabria		MACH_CALABRIA		CALABRIA		4046
+ev_imx287		MACH_EV_IMX287		EV_IMX287		4047
+erau			MACH_ERAU		ERAU			4048
+sichuan			MACH_SICHUAN		SICHUAN			4049
+davinci_da850		MACH_DAVINCI_DA850	DAVINCI_DA850		4051
+omap138_trunarc		MACH_OMAP138_TRUNARC	OMAP138_TRUNARC		4052
+bcm4761			MACH_BCM4761		BCM4761			4053
+picasso_e2		MACH_PICASSO_E2		PICASSO_E2		4054
+picasso_mf		MACH_PICASSO_MF		PICASSO_MF		4055
+miro			MACH_MIRO		MIRO			4056
+at91sam9g20ewon3	MACH_AT91SAM9G20EWON3	AT91SAM9G20EWON3	4057
+yoyo			MACH_YOYO		YOYO			4058
+windjkl			MACH_WINDJKL		WINDJKL			4059
+monarudo		MACH_MONARUDO		MONARUDO		4060
+batan			MACH_BATAN		BATAN			4061
+tadao			MACH_TADAO		TADAO			4062
+baso			MACH_BASO		BASO			4063
+mahon			MACH_MAHON		MAHON			4064
+villec2			MACH_VILLEC2		VILLEC2			4065
+asi1230			MACH_ASI1230		ASI1230			4066
+alaska			MACH_ALASKA		ALASKA			4067
+swarco_shdsl2		MACH_SWARCO_SHDSL2	SWARCO_SHDSL2		4068
+oxrtu			MACH_OXRTU		OXRTU			4069
+omap5_panda		MACH_OMAP5_PANDA	OMAP5_PANDA		4070
+c8000			MACH_C8000		C8000			4072
+bje_display3_5		MACH_BJE_DISPLAY3_5	BJE_DISPLAY3_5		4073
+picomod7		MACH_PICOMOD7		PICOMOD7		4074
+picocom5		MACH_PICOCOM5		PICOCOM5		4075
+qblissa8		MACH_QBLISSA8		QBLISSA8		4076
+armstonea8		MACH_ARMSTONEA8		ARMSTONEA8		4077
+netdcu14		MACH_NETDCU14		NETDCU14		4078
+at91sam9x5_epiphan	MACH_AT91SAM9X5_EPIPHAN	AT91SAM9X5_EPIPHAN	4079
+p2u			MACH_P2U		P2U			4080
+doris			MACH_DORIS		DORIS			4081
+j49			MACH_J49		J49			4082
+vdss2e			MACH_VDSS2E		VDSS2E			4083
+vc300			MACH_VC300		VC300			4084
+ns115_pad_test		MACH_NS115_PAD_TEST	NS115_PAD_TEST		4085
+ns115_pad_ref		MACH_NS115_PAD_REF	NS115_PAD_REF		4086
+ns115_phone_test	MACH_NS115_PHONE_TEST	NS115_PHONE_TEST	4087
+ns115_phone_ref		MACH_NS115_PHONE_REF	NS115_PHONE_REF		4088
+golfc			MACH_GOLFC		GOLFC			4089
+xerox_olympus		MACH_XEROX_OLYMPUS	XEROX_OLYMPUS		4090
+mx6sl_arm2		MACH_MX6SL_ARM2		MX6SL_ARM2		4091
+csb1701_csb1726		MACH_CSB1701_CSB1726	CSB1701_CSB1726		4092
+at91sam9xeek		MACH_AT91SAM9XEEK	AT91SAM9XEEK		4093
+ebv210			MACH_EBV210		EBV210			4094
+msm7627a_qrd7		MACH_MSM7627A_QRD7	MSM7627A_QRD7		4095
+svthin			MACH_SVTHIN		SVTHIN			4096
+duovero			MACH_DUOVERO		DUOVERO			4097
+chupacabra		MACH_CHUPACABRA		CHUPACABRA		4098
+scorpion		MACH_SCORPION		SCORPION		4099
+davinci_he_hmi10	MACH_DAVINCI_HE_HMI10	DAVINCI_HE_HMI10	4100
+topkick			MACH_TOPKICK		TOPKICK			4101
+m3_auguestrush		MACH_M3_AUGUESTRUSH	M3_AUGUESTRUSH		4102
+ipc335x			MACH_IPC335X		IPC335X			4103
+sun4i			MACH_SUN4I		SUN4I			4104
+imx233_olinuxino	MACH_IMX233_OLINUXINO	IMX233_OLINUXINO	4105
+k2_wl			MACH_K2_WL		K2_WL			4106
+k2_ul			MACH_K2_UL		K2_UL			4107
+k2_cl			MACH_K2_CL		K2_CL			4108
+minbari_w		MACH_MINBARI_W		MINBARI_W		4109
+minbari_m		MACH_MINBARI_M		MINBARI_M		4110
+k035			MACH_K035		K035			4111
+ariel			MACH_ARIEL		ARIEL			4112
+arielsaarc		MACH_ARIELSAARC		ARIELSAARC		4113
+arieldkb		MACH_ARIELDKB		ARIELDKB		4114
+armadillo810		MACH_ARMADILLO810	ARMADILLO810		4115
+tam335x			MACH_TAM335X		TAM335X			4116
+grouper			MACH_GROUPER		GROUPER			4117
+mpcsa21_9g20		MACH_MPCSA21_9G20	MPCSA21_9G20		4118
+m6u_cpu			MACH_M6U_CPU		M6U_CPU			4119
+davinci_dp10		MACH_DAVINCI_DP10	DAVINCI_DP10		4120
+ginkgo			MACH_GINKGO		GINKGO			4121
+cgt_qmx6		MACH_CGT_QMX6		CGT_QMX6		4122
+profpga			MACH_PROFPGA		PROFPGA			4123
+acfx100oc		MACH_ACFX100OC		ACFX100OC		4124
+acfx100nb		MACH_ACFX100NB		ACFX100NB		4125
+capricorn		MACH_CAPRICORN		CAPRICORN		4126
+pisces			MACH_PISCES		PISCES			4127
+aries			MACH_ARIES		ARIES			4128
+cancer			MACH_CANCER		CANCER			4129
+leo			MACH_LEO		LEO			4130
+virgo			MACH_VIRGO		VIRGO			4131
+sagittarius		MACH_SAGITTARIUS	SAGITTARIUS		4132
+devil			MACH_DEVIL		DEVIL			4133
+ballantines		MACH_BALLANTINES	BALLANTINES		4134
+omap3_procerusvpu	MACH_OMAP3_PROCERUSVPU	OMAP3_PROCERUSVPU	4135
+my27			MACH_MY27		MY27			4136
+sun6i			MACH_SUN6I		SUN6I			4137
+sun5i			MACH_SUN5I		SUN5I			4138
+mx512_mx		MACH_MX512_MX		MX512_MX		4139
+kzm9g			MACH_KZM9G		KZM9G			4140
+vdstbn			MACH_VDSTBN		VDSTBN			4141
+cfa10036		MACH_CFA10036		CFA10036		4142
+cfa10049		MACH_CFA10049		CFA10049		4143
+pcm051			MACH_PCM051		PCM051			4144
+vybrid_vf7xx		MACH_VYBRID_VF7XX	VYBRID_VF7XX		4145
+vybrid_vf6xx		MACH_VYBRID_VF6XX	VYBRID_VF6XX		4146
+vybrid_vf5xx		MACH_VYBRID_VF5XX	VYBRID_VF5XX		4147
+vybrid_vf4xx		MACH_VYBRID_VF4XX	VYBRID_VF4XX		4148
+aria_g25		MACH_ARIA_G25		ARIA_G25		4149
+bcm21553		MACH_BCM21553		BCM21553		4150
+smdk5410		MACH_SMDK5410		SMDK5410		4151
+lpc18xx			MACH_LPC18XX		LPC18XX			4152
+oratisparty		MACH_ORATISPARTY	ORATISPARTY		4153
+qseven			MACH_QSEVEN		QSEVEN			4154
+gmv_generic		MACH_GMV_GENERIC	GMV_GENERIC		4155
+th_link_eth		MACH_TH_LINK_ETH	TH_LINK_ETH		4156
+tn_muninn		MACH_TN_MUNINN		TN_MUNINN		4157
+rampage			MACH_RAMPAGE		RAMPAGE			4158
+visstrim_mv10		MACH_VISSTRIM_MV10	VISSTRIM_MV10		4159
+mx28_wilma		MACH_MX28_WILMA		MX28_WILMA		4164
+msm8625_ffa		MACH_MSM8625_FFA	MSM8625_FFA		4166
+vpu101			MACH_VPU101		VPU101			4167
+baileys			MACH_BAILEYS		BAILEYS			4169
+familybox		MACH_FAMILYBOX		FAMILYBOX		4170
+ensemble_mx35		MACH_ENSEMBLE_MX35	ENSEMBLE_MX35		4171
+sc_sps_1		MACH_SC_SPS_1		SC_SPS_1		4172
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index 858748eaa144..586961929e96 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -11,12 +11,15 @@
 #include <linux/types.h>
 #include <linux/cpu.h>
 #include <linux/cpu_pm.h>
+#include <linux/hardirq.h>
 #include <linux/kernel.h>
 #include <linux/notifier.h>
 #include <linux/signal.h>
 #include <linux/sched.h>
 #include <linux/smp.h>
 #include <linux/init.h>
+#include <linux/uaccess.h>
+#include <linux/user.h>
 
 #include <asm/cp15.h>
 #include <asm/cputype.h>
@@ -238,11 +241,11 @@ static void vfp_panic(char *reason, u32 inst)
 {
 	int i;
 
-	printk(KERN_ERR "VFP: Error: %s\n", reason);
-	printk(KERN_ERR "VFP: EXC 0x%08x SCR 0x%08x INST 0x%08x\n",
+	pr_err("VFP: Error: %s\n", reason);
+	pr_err("VFP: EXC 0x%08x SCR 0x%08x INST 0x%08x\n",
 		fmrx(FPEXC), fmrx(FPSCR), inst);
 	for (i = 0; i < 32; i += 2)
-		printk(KERN_ERR "VFP: s%2u: 0x%08x s%2u: 0x%08x\n",
+		pr_err("VFP: s%2u: 0x%08x s%2u: 0x%08x\n",
 		       i, vfp_get_float(i), i+1, vfp_get_float(i+1));
 }
 
@@ -430,7 +433,10 @@ void VFP_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs)
 
 static void vfp_enable(void *unused)
 {
-	u32 access = get_copro_access();
+	u32 access;
+
+	BUG_ON(preemptible());
+	access = get_copro_access();
 
 	/*
 	 * Enable full access to VFP (cp10 and cp11)
@@ -446,7 +452,7 @@ static int vfp_pm_suspend(void)
 
 	/* if vfp is on, then save state for resumption */
 	if (fpexc & FPEXC_EN) {
-		printk(KERN_DEBUG "%s: saving vfp state\n", __func__);
+		pr_debug("%s: saving vfp state\n", __func__);
 		vfp_save_state(&ti->vfpstate, fpexc);
 
 		/* disable, just in case */
@@ -529,6 +535,93 @@ void vfp_flush_hwstate(struct thread_info *thread)
 }
 
 /*
+ * Save the current VFP state into the provided structures and prepare
+ * for entry into a new function (signal handler).
+ */
+int vfp_preserve_user_clear_hwstate(struct user_vfp __user *ufp,
+				    struct user_vfp_exc __user *ufp_exc)
+{
+	struct thread_info *thread = current_thread_info();
+	struct vfp_hard_struct *hwstate = &thread->vfpstate.hard;
+	int err = 0;
+
+	/* Ensure that the saved hwstate is up-to-date. */
+	vfp_sync_hwstate(thread);
+
+	/*
+	 * Copy the floating point registers. There can be unused
+	 * registers see asm/hwcap.h for details.
+	 */
+	err |= __copy_to_user(&ufp->fpregs, &hwstate->fpregs,
+			      sizeof(hwstate->fpregs));
+	/*
+	 * Copy the status and control register.
+	 */
+	__put_user_error(hwstate->fpscr, &ufp->fpscr, err);
+
+	/*
+	 * Copy the exception registers.
+	 */
+	__put_user_error(hwstate->fpexc, &ufp_exc->fpexc, err);
+	__put_user_error(hwstate->fpinst, &ufp_exc->fpinst, err);
+	__put_user_error(hwstate->fpinst2, &ufp_exc->fpinst2, err);
+
+	if (err)
+		return -EFAULT;
+
+	/* Ensure that VFP is disabled. */
+	vfp_flush_hwstate(thread);
+
+	/*
+	 * As per the PCS, clear the length and stride bits for function
+	 * entry.
+	 */
+	hwstate->fpscr &= ~(FPSCR_LENGTH_MASK | FPSCR_STRIDE_MASK);
+	return 0;
+}
+
+/* Sanitise and restore the current VFP state from the provided structures. */
+int vfp_restore_user_hwstate(struct user_vfp __user *ufp,
+			     struct user_vfp_exc __user *ufp_exc)
+{
+	struct thread_info *thread = current_thread_info();
+	struct vfp_hard_struct *hwstate = &thread->vfpstate.hard;
+	unsigned long fpexc;
+	int err = 0;
+
+	/* Disable VFP to avoid corrupting the new thread state. */
+	vfp_flush_hwstate(thread);
+
+	/*
+	 * Copy the floating point registers. There can be unused
+	 * registers see asm/hwcap.h for details.
+	 */
+	err |= __copy_from_user(&hwstate->fpregs, &ufp->fpregs,
+				sizeof(hwstate->fpregs));
+	/*
+	 * Copy the status and control register.
+	 */
+	__get_user_error(hwstate->fpscr, &ufp->fpscr, err);
+
+	/*
+	 * Sanitise and restore the exception registers.
+	 */
+	__get_user_error(fpexc, &ufp_exc->fpexc, err);
+
+	/* Ensure the VFP is enabled. */
+	fpexc |= FPEXC_EN;
+
+	/* Ensure FPINST2 is invalid and the exception flag is cleared. */
+	fpexc &= ~(FPEXC_EX | FPEXC_FP2V);
+	hwstate->fpexc = fpexc;
+
+	__get_user_error(hwstate->fpinst, &ufp_exc->fpinst, err);
+	__get_user_error(hwstate->fpinst2, &ufp_exc->fpinst2, err);
+
+	return err ? -EFAULT : 0;
+}
+
+/*
  * VFP hardware can lose all context when a CPU goes offline.
  * As we will be running in SMP mode with CPU hotplug, we will save the
  * hardware state at every thread switch.  We clear our held state when
@@ -558,7 +651,7 @@ static int __init vfp_init(void)
 	unsigned int cpu_arch = cpu_architecture();
 
 	if (cpu_arch >= CPU_ARCH_ARMv6)
-		vfp_enable(NULL);
+		on_each_cpu(vfp_enable, NULL, 1);
 
 	/*
 	 * First check that there is a VFP that we can use.
@@ -571,18 +664,16 @@ static int __init vfp_init(void)
 	barrier();
 	vfp_vector = vfp_null_entry;
 
-	printk(KERN_INFO "VFP support v0.3: ");
+	pr_info("VFP support v0.3: ");
 	if (VFP_arch)
-		printk("not present\n");
+		pr_cont("not present\n");
 	else if (vfpsid & FPSID_NODOUBLE) {
-		printk("no double precision support\n");
+		pr_cont("no double precision support\n");
 	} else {
 		hotcpu_notifier(vfp_hotplug, 0);
 
-		smp_call_function(vfp_enable, NULL, 1);
-
 		VFP_arch = (vfpsid & FPSID_ARCH_MASK) >> FPSID_ARCH_BIT;  /* Extract the architecture version */
-		printk("implementor %02x architecture %d part %02x variant %x rev %x\n",
+		pr_cont("implementor %02x architecture %d part %02x variant %x rev %x\n",
 			(vfpsid & FPSID_IMPLEMENTER_MASK) >> FPSID_IMPLEMENTER_BIT,
 			(vfpsid & FPSID_ARCH_MASK) >> FPSID_ARCH_BIT,
 			(vfpsid & FPSID_PART_MASK) >> FPSID_PART_BIT,